WorldWideScience

Sample records for program designed primarily

  1. No Federal Programs are Designed Primarily to Support Engineering Education, but Many Do.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    Federal civilian agency support for engineering education in 1980 is described. The support is placed in categories, current concerns about the supply of engineers and conditions of engineering schools are related to the support, and the changes made by the fiscal year 1982 budget are identified. It was found that 38 programs in 11 federal…

  2. LMFBR fuel-design environment for endurance testing, primarily of oxide fuel elements with local faults

    International Nuclear Information System (INIS)

    Warinner, D.K.

    1980-01-01

    The US Department of Energy LMFBR Lines-of-Assurance are briefly stated and local faults are given perspective with an historical review and definition to help define the constraints of LMFBR fuel-element designs. Local-fault-propagation (fuel-element failure-propagation and blockage propagation) perceptions are reviewed. Fuel pin designs and major LMFBR parameters affecting pin performance are summarized. The interpretation of failed-fuel data is aided by a discussion of the effects of nonprototypicalities. The fuel-pin endurance expected in the US, USSR, France, UK, Japan, and West Germany is outlined. Finally, fuel-failure detection and location by delayed-neutron and gaseous-fission-product monitors are briefly discussed to better realize the operational limits

  3. Tailoring cancer education and support programs for low-income, primarily African American cancer survivors.

    Science.gov (United States)

    Martin, Michelle Y; Pollack, Lori A; Evans, Mary B; Smith, Judith Lee; Kratt, Polly; Prayor-Patterson, Heather; Watson, Christopher D; Dignan, Mark; Cheney, Lydia C; Pisu, Maria; Liwo, Amandiy; Hullett, Sandral

    2011-01-01

    to identify the information and stress-management topics of most interest to low-income, predominantly African American cancer survivors. descriptive, cross sectional. outpatient oncology clinic in a public hospital in Birmingham, Alabama. 25 patients with cancer; 12 were men, 22 were African Americans, and 16 had a 12th-grade education or less. patients ranked potential topics to be included in an educational curriculum. quantitative rankings of information and stress-management priorities. learning about cancer, understanding cancer treatments, relieving cancer pain, and keeping well in mind and body were the most highly ranked topics among those offered within the American Cancer Society's I Can Cope curriculum, which also included supportive topics such as mobilizing social support. The preferred stress-management topics were humor therapy, music therapy, meditation, and relaxation; lower-ranked topics included pet therapy and art as therapy. cancer survivors appear most interested in topics specific to their illness and treatment versus supportive topics. Stress management also received high rankings. nurses have a key role in providing patient education and support. Tailoring education programs may better target specific needs and improve the quality of cancer care of underserved patients.

  4. Translating an Effective Group-Based HIV Prevention Program to a Program Delivered Primarily by a Computer: Methods and Outcomes

    Science.gov (United States)

    Card, Josefina J.; Kuhn, Tamara; Solomon, Julie; Benner, Tabitha A.; Wingood, Gina M.; DiClemente, Ralph J.

    2011-01-01

    We describe development of SAHARA (SiSTAS Accessing HIV/AIDS Resources At-a-click), an innovative HIV prevention program that uses a computer to deliver an updated version of SiSTA, a widely used, effective group-level HIV prevention intervention for African American women ages 18-29. Fidelity to SiSTA's core components was achieved using: (1)…

  5. Designing computer programs

    CERN Document Server

    Haigh, Jim

    1994-01-01

    This is a book for students at every level who are learning to program for the first time - and for the considerable number who learned how to program but were never taught to structure their programs. The author presents a simple set of guidelines that show the programmer how to design in a manageable structure from the outset. The method is suitable for most languages, and is based on the widely used 'JSP' method, to which the student may easily progress if it is needed at a later stage.Most language specific texts contain very little if any information on design, whilst books on des

  6. A randomized trial of a DWI intervention program for first offenders: intervention outcomes and interactions with antisocial personality disorder among a primarily American-Indian sample.

    Science.gov (United States)

    Woodall, W Gill; Delaney, Harold D; Kunitz, Stephen J; Westerberg, Verner S; Zhao, Hongwei

    2007-06-01

    Randomized trial evidence on the effectiveness of incarceration and treatment of first-time driving while intoxicated (DWI) offenders who are primarily American Indian has yet to be reported in the literature on DWI prevention. Further, research has confirmed the association of antisocial personality disorder (ASPD) with problems with alcohol including DWI. A randomized clinical trial was conducted, in conjunction with 28 days of incarceration, of a treatment program incorporating motivational interviewing principles for first-time DWI offenders. The sample of 305 offenders including 52 diagnosed as ASPD by the Diagnostic Interview Schedule were assessed before assignment to conditions and at 6, 12, and 24 months after discharge. Self-reported frequency of drinking and driving as well as various measures of drinking over the preceding 90 days were available at all assessments for 244 participants. Further, DWI rearrest data for 274 participants were available for analysis. Participants randomized to receive the first offender incarceration and treatment program reported greater reductions in alcohol consumption from baseline levels when compared with participants who were only incarcerated. Antisocial personality disorder participants reported heavier and more frequent drinking but showed significantly greater declines in drinking from intake to posttreatment assessments. Further, the treatment resulted in larger effects relative to the control on ASPD than non-ASPD participants. Nonconfrontational treatment may significantly enhance outcomes for DWI offenders with ASPD when delivered in an incarcerated setting, and in the present study, such effects were found in a primarily American-Indian sample.

  7. The design of the MAD Design Program

    International Nuclear Information System (INIS)

    Niederer, J.

    1992-01-01

    The study of long term stability in particle accelerators has long been served by a group of widely circulated computer programs. The progress in these programs has mirrored the growth and versatility in accelerator size, complexity, and purpose, as well as evolving technologies in computing software and hardware. A number of large accelerator projects during the last decade were designed with the aid of physics programs either written for, or tailored for the project at hand, each invariably benefiting from contributions of previous workers. This paper outlines the recent history of of expample of an accelerator lattice model tool kit, the Methodical Accelerator Design (MAD) Program, which has tried to knit together this collective wisdom of the accelerator community, The ideas behind the software design of the program itself are traced here; the accelerator physics contents and origins are thoroughly documented elsewhere. These informal notes have a Brookhaven flavor, in part because of early BNL efforts to generalize the ways that technical problems are organized and presented to computers. Some recent BNL applications not covered in the extensive CERN documentation are also included

  8. Programming languages for circuit design.

    Science.gov (United States)

    Pedersen, Michael; Yordanov, Boyan

    2015-01-01

    This chapter provides an overview of a programming language for Genetic Engineering of Cells (GEC). A GEC program specifies a genetic circuit at a high level of abstraction through constraints on otherwise unspecified DNA parts. The GEC compiler then selects parts which satisfy the constraints from a given parts database. GEC further provides more conventional programming language constructs for abstraction, e.g., through modularity. The GEC language and compiler is available through a Web tool which also provides functionality, e.g., for simulation of designed circuits.

  9. Design Minimalism in Robotics Programming

    Directory of Open Access Journals (Sweden)

    Anthony Cowley

    2006-03-01

    Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

  10. Design Minimalism in Robotics Programming

    Directory of Open Access Journals (Sweden)

    Anthony Cowley

    2008-11-01

    Full Text Available With the increasing use of general robotic platforms in different application scenarios, modularity and reusability have become key issues in effective robotics programming. In this paper, we present a minimalist approach for designing robot software, in which very simple modules, with well designed interfaces and very little redundancy can be connected through a strongly typed framework to specify and execute different robotics tasks.

  11. Designing and Programming CICS Applications

    CERN Document Server

    Horswill, John

    2011-01-01

    CICS is an application server that delivers industrial-strength, online transaction management for critical enterprise applications. Proven in the market for over 30 years with many of the world's leading businesses, CICS enables today's customers to modernize and extend their applications to take advantage of the opportunities provided by e-business while maximizing the benefits of their existing investments. Designing and Programming CICS Applications will benefit a diverse audience. It introduces new users of IBM's mainframe (OS/390) to CICS features. It shows experienced users how t

  12. Market Aspects of an Interior Design Program.

    Science.gov (United States)

    Gold, Judy E.

    A project was conducted to evaluate a proposed interior design program in order to determine the marketability (job availability in the field of interior design and home furnishings merchandising) and the feasibility (educational requirements for entrance into the interior design and home furnishings merchandising job market) of the program. To…

  13. An ion synchrotron design program

    International Nuclear Information System (INIS)

    Yoshida, Katsuhisa; Ishi, Yoshihiro

    1995-01-01

    Ion synchrotrons have promising applications in medical and other commercial settings as well as in physics research. Mitsubishi Electric has developed a program to facilitate efficiency studies on processes such as ion injection, radio-frequency capture and acceleration, and beam extraction. The integration method used in the particle-orbit calculations maintains the symplectic characteristic of Hamilton dynamics making it possible to simulate long-term phenomena reliably. The article introduces this program and several of its applications. (author)

  14. General-purpose RFQ design program

    International Nuclear Information System (INIS)

    Wadlinger, E.A.

    1984-01-01

    We have written a general-purpose, radio-frequency quadrupole (RFQ) design program that allows maximum flexibility in picking design algorithms. This program optimizes the RFQ on any combination of design parameters while simultaneously satisfying mutually compatible, physically required constraint equations. It can be very useful for deriving various scaling laws for RFQs. This program has a friendly user interface in addition to checking the consistency of the user-defined requirements and is written to minimize the effort needed to incorporate additional constraint equations. We describe the program and present some examples

  15. Design basis reconstitution for an effective design control program

    International Nuclear Information System (INIS)

    Banerjee, A.K.

    1987-01-01

    Configuration management is a new buzz word in the nuclear power industry. Whatever its definition, everyone agrees that the configuration of a nuclear power plant must be managed effectively. In layman's terms, configuration management means that a plant must be built, operated, and maintained in a manner consistent with its design basis. Thus, control of the design basis is the most important element in any configuration management program. Until recently, the US Nuclear Regulatory Commission's (NRC's) review of design basis focused on the plants that were about to get operating licenses. However, incidents at a few operating nuclear plants and NRC inspections (Safety System Functional Inspection and Safety System Outage Modification Inspection) have indicated weaknesses in older operating plant design basis documentation and design change control programs. Thus, reconstitution of plant design basis has become an important issue. This paper presents the major element of a design basis reconstitution program, which can be an immense undertaking for some of the older operating plants

  16. Electronic automation of LRFD design programs.

    Science.gov (United States)

    2010-03-01

    The study provided electronic programs to WisDOT for designing pre-stressed girders and piers using the Load : Resistance Factor Design (LRFD) methodology. The software provided is intended to ease the transition to : LRFD for WisDOT design engineers...

  17. Engineering Design Education Program for Graduate School

    Science.gov (United States)

    Ohbuchi, Yoshifumi; Iida, Haruhiko

    The new educational methods of engineering design have attempted to improve mechanical engineering education for graduate students in a way of the collaboration in education of engineer and designer. The education program is based on the lecture and practical exercises concerning the product design, and has engineering themes and design process themes, i.e. project management, QFD, TRIZ, robust design (Taguchi method) , ergonomics, usability, marketing, conception etc. At final exercise, all students were able to design new product related to their own research theme by applying learned knowledge and techniques. By the method of engineering design education, we have confirmed that graduate students are able to experience technological and creative interest.

  18. Effective safety training program design

    International Nuclear Information System (INIS)

    Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

    1991-01-01

    Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

  19. Instructional Design of a Programming Course

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Bennedsen, Jens

    2007-01-01

    object-oriented programming course is designed according to results of cognitive science and educational psychology in general and cognitive load theory and cognitive skill acquisition in particular; the principal techniques applied are: worked examples, scaffolding, faded guidance, cognitive...... apprenticeship, and emphasis of patterns to aid schema creation and improve learning. As part of the presentation of the course, we provide a characterization of model-driven programming---the approach we have adopted in the introductory programming course. The result is an introductory programming course...... emphasizing a pattern-based approach to programming and schema acquisition in order to improve learning....

  20. Double degree master program: Optical Design

    Science.gov (United States)

    Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

    2015-10-01

    Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

  1. Designing Academic Leadership Minor Programs: Emerging Models

    Science.gov (United States)

    Diallo, Lamine; Gerhardt, Kris

    2017-01-01

    With a growing number of leadership programs in universities and colleges in North America, leadership educators and researchers are engaged in a wide ranging dialogue to propose clear processes, content, and designs for providing academic leadership education. This research analyzes the curriculum design of 52 institutions offering a "Minor…

  2. Logic-programming language enriches design processes

    Energy Technology Data Exchange (ETDEWEB)

    Kitson, B.; Ow-Wing, K.

    1984-03-22

    With the emergence of a set of high-level CAD tools for programmable logic devices, designers can translate logic into functional custom devices simply and efficiently. The core of the package is a blockstructured hardware description language called PLPL, for ''programmable-logic programming language.'' The cheif advantage of PLPL lies in its multiple input formats, which permit different design approaches for a variety of design problems. The higher the level of the approach, the closer PLPL will come to directly specifying the desired function. Intermediate steps in the design process can be eliminated, along with the errors that might have been generated during those steps.

  3. Instructional Design and the Media Program.

    Science.gov (United States)

    Hug, William E.

    Designed for training school library/media specialists to establish media programs as an integral part of the school curriculum, this text is divided into four general areas. The first two chapters focus on what society expects of the schools and how educators respond. Systems principles are the shown to apply to the building of an educational…

  4. Advanced Design Program (ARIES) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Tillack, Mark [Univ. of California, San Diego, CA (United States)

    2016-02-16

    Progress is reported for the ARIES 3-year research program at UC San Diego, including three main tasks: 1. Completion of ARIES research on PMI/PFC issues. 2. Detailed engineering design and analysis of divertors and first wall/blankets. 3. Mission & requirements of FNSF.

  5. Program Helps Design Tests Of Developmental Software

    Science.gov (United States)

    Hops, Jonathan

    1994-01-01

    Computer program called "A Formal Test Representation Language and Tool for Functional Test Designs" (TRL) provides automatic software tool and formal language used to implement category-partition method and produce specification of test cases in testing phase of development of software. Category-partition method useful in defining input, outputs, and purpose of test-design phase of development and combines benefits of choosing normal cases having error-exposing properties. Traceability maintained quite easily by creating test design for each objective in test plan. Effort to transform test cases into procedures simplified by use of automatic software tool to create cases based on test design. Method enables rapid elimination of undesired test cases from consideration and facilitates review of test designs by peer groups. Written in C language.

  6. Designing a leadership development program for surgeons.

    Science.gov (United States)

    Jaffe, Gregory A; Pradarelli, Jason C; Lemak, Christy Harris; Mulholland, Michael W; Dimick, Justin B

    2016-01-01

    Although numerous leadership development programs (LDPs) exist in health care, no programs have been specifically designed to meet the needs of surgeons. This study aimed to elicit practicing surgeons' motivations and desired goals for leadership training to design an evidence-based LDP in surgery. At a large academic health center, we conducted semistructured interviews with 24 surgical faculty members who voluntarily applied and were selected for participation in a newly created LDP. Transcriptions of the interviews were analyzed using analyst triangulation and thematic coding to extract major themes regarding surgeons' motivations and perceived needs for leadership knowledge and skills. Themes from interview responses were then used to design the program curriculum specifically to meet the leadership needs of surgical faculty. Three major themes emerged regarding surgeons' motivations for seeking leadership training: (1) Recognizing key gaps in their formal preparation for leadership roles; (2) Exhibiting an appetite for personal self-improvement; and (3) Seeking leadership guidance for career advancement. Participants' interviews revealed four specific domains of knowledge and skills that they indicated as desired takeaways from a LDP: (1) leadership and communication; (2) team building; (3) business acumen/finance; and (4) greater understanding of the health care context. Interviews with surgical faculty members identified gaps in prior leadership training and demonstrated concrete motivations and specific goals for participating in a formal leadership program. A LDP that is specifically tailored to address the needs of surgical faculty may benefit surgeons at a personal and institutional level. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Design criteria for piping and nozzles program

    International Nuclear Information System (INIS)

    Moore, S.E.; Bryson, J.W.

    1977-01-01

    This report reviews the activities and accomplishments of the Design Criteria for Piping and Nozzles program being conducted by the Oak Ridge National Laboratory for the period July 1, 1975, to September 30, 1976. The objectives of the program are to conduct integrated experimental and analytical stress analysis studies of piping system components and isolated and closely-spaced pressure vessel nozzles in order to confirm and/or improve the adequacy of structural design criteria and analytical methods used to assure the safe design of nuclear power plants. Activities this year included the development of a finite-element program for analyzing two closely spaced nozzles in a cylindrical pressure vessel; a limited-parameter study of vessels with isolated nozzles, finite-element studies of piping elbows, a fatigue test of an out-of-round elbow, summary and evaluation of experimental studies on the elastic-response and fatigue failure of tees, parameter studies on the behavior of flanged joints, publication of fifteen topical reports and papers on various experimental and analytical studies; and the development and acceptance of a number of design rules changes to the ASME Code. 2 figures, 2 tables

  8. NRC Seismic Design Margins Program Plan

    International Nuclear Information System (INIS)

    Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

    1985-08-01

    Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

  9. Large coil program support structure conceptual design

    International Nuclear Information System (INIS)

    Litherland, P.S.

    1977-01-01

    The purpose of the Large Coil Program (LCP) is to perform tests on both pool boiling and force cooled superconducting toroidal field coils. The tests will attempt to approximate conditions anticipated in an ignition tokamak. The test requirements resulted in a coil support design which accommodates up to six (6) test coils and is mounted to a structure capable of resisting coil interactions. The steps leading to the present LCP coil support structure design, details on selected structural components, and the basic assembly sequence are discussed

  10. Design and analysis of environmental monitoring programs

    DEFF Research Database (Denmark)

    Lophaven, Søren Nymand

    2005-01-01

    This thesis describes statistical methods for modelling space-time phenomena. The methods were applied to data from the Danish marine monitoring program in the Kattegat, measured in the five-year period 1993-1997. The proposed model approaches are characterised as relatively simple methods, which...... into account. Thus, it serves as a compromise between existing methods. The space-time model approaches and geostatistical design methods used in this thesis are generally applicable, i.e. with minor modifications they could equally well be applied within areas such as soil and air pollution. In Danish: Denne...

  11. Large Coil Program magnetic system design study

    International Nuclear Information System (INIS)

    Moses, S.D.; Johnson, N.E.

    1977-01-01

    The primary objective of the Large Coil Program (LCP) is to demonstrate the reliable operation of large superconducting coils to provide a basis for the design principles, materials, and fabrication techniques proposed for the toroidal magnets for the THE NEXT STEP (TNS) and other future tokamak devices. This paper documents a design study of the Large Coil Test Facility (LCTF) in which the structural response of the Toroidal Field (TF) Coils and the supporting structure was evaluated under simulated reactor conditions. The LCP test facility structural system consists of six TF Coils, twelve coil-to-coil torsional restraining beams (torque rings), a central bucking post with base, and a Pulse Coil system. The NASTRAN Finite Element Structural Analysis computer Code was utilized to determine the distribution of deflections, forces, and stresses for each of the TF Coils, torque rings, and the central bucking post. Eleven load conditions were selected to represent probable test operations. Pulse Coils suspended in the bore of the test coil were energized to simulate the pulsed field environment characteristic of the TNS reactor system. The TORMAC Computer Code was utilized to develop the magnetic forces in the TF Coils for each of the eleven loading conditions examined, with or without the Pulse Coils energized. The TORMAC computer program output forces were used directly as input load conditions for the NASTRAN analyses. Results are presented which demonstrate the reliability of the LCTF under simulated reactor operating conditions

  12. Hydrochemical and stream sediment reconnaissance of the National Uranium Resource Evaluation Program, primarily for the Rocky Mountain States of New Mexico, Colorado, Wyoming, Montana, and the State of Alaska. Semiannual progress report, April-September 1979

    International Nuclear Information System (INIS)

    Morris, W.A.; Bunker, M.E.; Waterbury, G.R.; Waller, R.A.

    1979-10-01

    Reconnaissance sampling was done in five partially completed quadrangles, the North Slope of Alaska, and the Panhandle of Alaska. Detailed geochemical survey sampling was done in nine follow-up study areas. About 23,000 waters and 25,000 sediments were collected, bringing the LASL totals to 165,000 waters and 185,000 sediments from 220,000 locations. Almost all of the Rocky Mountain region and 85% of Alaska have been sampled. About 9000 water and 22,000 sediment samples were analyzed for the standard LASL multielement suite (uranium plus 43 additional elements). Work continued on improving and automating all analytical techniques and building a state-of-the-art emission spectrograph for waters and sediments. The second neutron activation line became operational in July, bringing the sediment throughout to the designed 400 samples per day. Seven multielement reconnaissance reports, one detailed geochemical survey report, one semiannual progress report, and one topical report were open filed at the US DOE Grand Junction Office, Colorado

  13. NASA universities advanced space design program, focus on nuclear engineering

    International Nuclear Information System (INIS)

    Lyon, W.F. III; George, J.A.; Alred, J.W.; Peddicord, K.L.

    1987-01-01

    In January 1985, the National Aeronautics and Space Administration (NASA), in affiliation with the Universities Space Research Association (USRA), inaugurated the NASA Universities Advanced Space Design Program. The purpose of the program was to encourage participating universities to utilize design projects for the senior and graduate level design courses that would focus on topics relevant to the nation's space program. The activities and projects being carried out under the NASA Universities Advanced Space Design Program are excellent experiences for the participants. This program is a well-conceived, well-planned effort to achieve the maximum benefit out of not only the university design experience but also of the subsequent summer programs. The students in the university design classes have the opportunity to investigate dramatic and new concepts, which at the same time have a place in a program of national importance. This program could serve as a very useful model for the development of university interaction with other federal agencies

  14. Design of adaptive programming teaching tools

    OpenAIRE

    Urbonienė, Jūratė

    2014-01-01

    The dissertation examines programming teaching subject material adaptation to the learner's individual qualities - his learning style by Herrmann learning style classification. To that purpose, programming teaching features, existing programming teaching environments and systems, adaptive learning systems, software agents and agent systems, students learning styles and learning material elements (learning objects - LO) and their repositories and learning systems development methods were exami...

  15. Program computes single-point failures in critical system designs

    Science.gov (United States)

    Brown, W. R.

    1967-01-01

    Computer program analyzes the designs of critical systems that will either prove the design is free of single-point failures or detect each member of the population of single-point failures inherent in a system design. This program should find application in the checkout of redundant circuits and digital systems.

  16. A CAD (Classroom Assessment Design) of a Computer Programming Course

    Science.gov (United States)

    Hawi, Nazir S.

    2012-01-01

    This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified…

  17. Mechanistic flexible pavement overlay design program.

    Science.gov (United States)

    2009-07-01

    The current Louisiana Department of Transportation and Development (LADOTD) overlay thickness design method follows the Component : Analysis procedure provided in the 1993 AASHTO pavement design guide. Since neither field nor laboratory tests a...

  18. Planning an Injection Mold Design Training Program.

    Science.gov (United States)

    Allyn, Edward P.

    With the increased use of plastics worldwide the shortage of trained personnel in moldmaking and design for plastic injection molds is becoming critical. Local schools and community colleges should provide courses in mold design and mold making, since most workers presently learn while working under experienced designers on the job. Following this…

  19. Design Exception In-Service Monitoring Program Development

    Science.gov (United States)

    2017-05-01

    This study evaluates various possible program designs for in-service monitoring of design exceptions (DEs) for the Georgia Department of Transportation. The study recommends a multitier stepwise approach to the evaluation of DEs. Specifically, the pr...

  20. SASD-tools for program design

    International Nuclear Information System (INIS)

    Gather, K.S.

    1989-01-01

    An overview of Structured Analysis Structured Design (SASD) methodology is given. Some emphasis is put on the time needed to start in a HEP environment with software design methodologies, and on the motivation for SASD. The need for tools is indicated, and examples of their usefulness in analysis and design steps are discussed. Limitations of certain design methods are indicated and additional tools are briefly discussed. Criteria for the selection of tools to be used in large systems design are discussed, and some attention is given to implications for management structures. (orig.)

  1. Design and Development of a Learning Design Virtual Internship Program

    Science.gov (United States)

    Ruggiero, Dana; Boehm, Jeff

    2016-01-01

    Incorporation of practical experience in learning design and technology education has long been accepted as an important step in the developmental process of future learning designers. The proliferation of adult online education has increased the number of graduate students who are in need of a practical internship placement but have limited…

  2. Disease management: program design, development, and implementation.

    Science.gov (United States)

    Harvey, N; DePue, D M

    1997-06-01

    Disease management is an emerging approach to patient management, customer satisfaction, and cost containment that comprises disease modeling; patient segmentation and risk assessment; clinical protocols; and wellness, self-management, and education. Implementing a disease management program poses significant challenges to healthcare organizations. To successfully implement a disease management program, a tightly integrated continuum of care, sophisticated information systems, and disease management support systems must be in place. Strategic partnerships with outside vendors may speed program implementation and provide opportunities to develop risk-sharing relationships.

  3. Design Patterns for Functional Strategic Programming

    OpenAIRE

    Laemmel, Ralf; Visser, Joost

    2002-01-01

    In previous work, we introduced the fundamentals and a supporting combinator library for \\emph{strategic programming}. This an idiom for generic programming based on the notion of a \\emph{functional strategy}: a first-class generic function that cannot only be applied to terms of any type, but which also allows generic traversal into subterms and can be customized with type-specific behaviour. This paper seeks to provide practicing functional programmers with pragmatic guidance in crafting th...

  4. development of a computer program for the design of auger

    African Journals Online (AJOL)

    User

    program was developed for the above processes to remove the constraints of the classical ... Results of evaluation tests show that the program is efficient in the ..... C. C AUGER CONVEYOR DESIGN FOR CHART A MATERIALS. 100 WRITE(*,2). WRITE(*,4)'DESIGN OF SCREW FOR CHART A MATERIALS'. WRITE(* ...

  5. An Integer Programming Approach to Item Bank Design.

    Science.gov (United States)

    van der Linden, Wim J.; Veldkamp, Bernard P.; Reese, Lynda M.

    2000-01-01

    Presents an integer programming approach to item bank design that can be used to calculate an optimal blueprint for an item bank in order to support an existing testing program. Demonstrates the approach empirically using an item bank designed for the Law School Admission Test. (SLD)

  6. GRAPHIC, time-sharing magnet design computer programs at Argonne

    International Nuclear Information System (INIS)

    Lari, R.J.

    1974-01-01

    This paper describes three magnet design computer programs in use at the Zero Gradient Synchrotron of Argonne National Laboratory. These programs are used in the time sharing mode in conjunction with a Tektronix model 4012 graphic display terminal. The first program in called TRIM, the second MAGNET, and the third GFUN. (U.S.)

  7. Documentation of Calculation Program and Guideline for Optimal Window Design

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Svendsen, Svend

    . A user-friendly calculation program based on simple input data has recently been developed to assist engineers and architects during the process of selecting suitable windows for residential building design. The program is organised in four steps, which together represent an analysis of how windows...... in a specific building design perform with regard to energy consumption, thermal indoor environment, and cost. The analyses in the steps gradually increase in level of detail and support the design decisions throughout the design process. This document presents work done to validate the program and demonstrates...

  8. Status of the HTR 500 design program

    International Nuclear Information System (INIS)

    Baust, E.; Arndt, E.

    1987-01-01

    Since 1982 BBC/HRB have offered the HTR 500 as the follow-on project of the THTR 300, the first large pebble bed reactor. The technical concept of the HTR-500 largely corresponds to the THTR 300 which has been in operation for almost 2 years now. In developing the design concept of the HTR 500 the ideas and demands of the reactor users in the FRG interested in the HTR have been taken into consideration to a large extent. In 1982 these potential users formed a working group 'Arbeitsgemeinschaft Hochtemperaturreaktor' (AHR), representing 16 power indusry companies and in early 1983, awarded a contract to HRB to perform a conceptual design study on the HTR 500. Within this conceptual design study BBC/HRB developed the safety concept of the HTR 500, prepared a detailed description of the overall power plant, and performed a cost calculation. These activities were completed in 1984. Based on the positive results of this conceptual design study, BBC/HRB are expecting to be granted a design contract by the users company Hochtemperaturreaktor GmbH (HRG) to establish the final complete design plans and documents for the HTR 500. (author)

  9. IGDS/TRAP Interface Program (ITIP). Software Design Document

    Science.gov (United States)

    Jefferys, Steve; Johnson, Wendell

    1981-01-01

    The preliminary design of the IGDS/TRAP Interface Program (ITIP) is described. The ITIP is implemented on the PDP 11/70 and interfaces directly with the Interactive Graphics Design System and the Data Management and Retrieval System. The program provides an efficient method for developing a network flow diagram. Performance requirements, operational rquirements, and design requirements are discussed along with sources and types of input and destination and types of output. Information processing functions and data base requirements are also covered.

  10. Unified Program Design: Organizing Existing Programming Models, Delivery Options, and Curriculum

    Science.gov (United States)

    Rubenstein, Lisa DaVia; Ridgley, Lisa M.

    2017-01-01

    A persistent problem in the field of gifted education has been the lack of categorization and delineation of gifted programming options. To address this issue, we propose Unified Program Design as a structural framework for gifted program models. This framework defines gifted programs as the combination of delivery methods and curriculum models.…

  11. Game Programming Course - Creative Design and Development

    Directory of Open Access Journals (Sweden)

    Jaak Henno

    2008-10-01

    Full Text Available Rapid developments of the Electronic Entertainment - computer and video games, virtual environments, the "Games 3.0" revolution - influences also courses about Games and Virtual Environments. In the following is discussed the course “Games and Virtual Environments” presented in the fall 2007 term in Tallinn University of Technology; the main emphasis of the course was not on programming technology, but on understanding games as a special form of communication and exploring specific features of this form.

  12. Development of design program for air handling units

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J.K.; Kim, J.H.; Kim, Y.K.; Kim, Y.I.; Kang, P.Y. [Hyundai Heavy Industries Co., Ltd. (Korea)

    2000-11-01

    An air handling unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the graphic user interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a Auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail. (author). 5 refs., 9 figs., 3 tabs.

  13. Development of design program for air handling units

    Energy Technology Data Exchange (ETDEWEB)

    Ham, J. K.; Kim, J. H.; Kim, Y. K.; Kim, Y. I.; Kang, P. Y. [Hyundai Heavy Industries Co., Ltd., Ulsan (Korea, Republic of)

    2000-07-01

    An Air Handling Unit(AHU) has been usually designed by manual calculations. Drawing works together with design calculations should be redone for every designing work, and also be needed to make some corrections of them. In order to design the AHU more efficiently, an AHU program has been developed. The developed program on the Windows environment is operated by the Graphic User Interface(GUI) realized using the Visual Basic Interpreter. The program provides calculation sheet of coils, weights and pressures in a MS-Excel file format as well as design drawing of the AHU in a auto CAD file format idealized by AutoLISP. Those files of the commercial softwares make easier for a designer to transfer design results to the another company for bid via e-mail.

  14. Hanford Site waste tank farm facilities design reconstitution program plan

    International Nuclear Information System (INIS)

    Vollert, F.R.

    1994-01-01

    Throughout the commercial nuclear industry the lack of design reconstitution programs prior to the mid 1980's has resulted in inadequate documentation to support operating facilities configuration changes or safety evaluations. As a result, many utilities have completed or have ongoing design reconstitution programs and have discovered that without sufficient pre-planning their program can be potentially very expensive and may result in end-products inconsistent with the facility needs or expectations. A design reconstitution program plan is developed here for the Hanford waste tank farms facility as a consequence of the DOE Standard on operational configuration management. This design reconstitution plan provides for the recovery or regeneration of design requirements and basis, the compilation of Design Information Summaries, and a methodology to disposition items open for regeneration that were discovered during the development of Design Information Summaries. Implementation of this plan will culminate in an end-product of about 30 Design Information Summary documents. These documents will be developed to identify tank farms facility design requirements and design bases and thereby capture the technical baselines of the facility. This plan identifies the methodology necessary to systematically recover documents that are sources of design input information, and to evaluate and disposition open items or regeneration items discovered during the development of the Design Information Summaries or during the verification and validation processes. These development activities will be governed and implemented by three procedures and a guide that are to be developed as an outgrowth of this plan

  15. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  16. Interactive computer program for optimal designs of longitudinal cohort studies.

    Science.gov (United States)

    Tekle, Fetene B; Tan, Frans E S; Berger, Martijn P F

    2009-05-01

    Many large scale longitudinal cohort studies have been carried out or are ongoing in different fields of science. Such studies need a careful planning to obtain the desired quality of results with the available resources. In the past, a number of researches have been performed on optimal designs for longitudinal studies. However, there was no computer program yet available to help researchers to plan their longitudinal cohort design in an optimal way. A new interactive computer program for the optimization of designs of longitudinal cohort studies is therefore presented. The computer program helps users to identify the optimal cohort design with an optimal number of repeated measurements per subject and an optimal allocations of time points within a given study period. Further, users can compute the loss in relative efficiencies of any other alternative design compared to the optimal one. The computer program is described and illustrated using a practical example.

  17. Design of All Digital Flight Program Training Desktop Application System

    Directory of Open Access Journals (Sweden)

    Li Yu

    2017-01-01

    Full Text Available All digital flight program training desktop application system operating conditions are simple. Can make the aircraft aircrew learning theory and operation training closely. Improve the training efficiency and effectiveness. This paper studies the application field and design requirements of flight program training system. Based on the WINDOWS operating system desktop application, the design idea and system architecture of the all digital flight program training system are put forward. Flight characteristics, key airborne systems and aircraft cockpit are simulated. Finally, By comparing flight training simulator and the specific script program training system, The characteristics and advantages of the training system are analyzed in this paper.

  18. A Learning Tool and Program Development for Mechatronics Design Education

    Science.gov (United States)

    Iribe, Masatsugu; Shirahata, Akihiro; Kita, Hiromasa; Sasashige, Yousuke; Dasai, Ryoichi

    In this paper we propose a new type educational program for Mechatronics design which contributes to develop the physical sense and problem solving ability of the students who study Mechatronics design. For this program we provide a new handicraft kit of 4-wheeled car which is composed of inexpensive and commonplace parts, and the performance of the assembled 4-wheeled car is sensitive to its assembly arrangement. And then we implemented this program with the handicraft kit to the university freshmen, and verified its effectiveness, and report the results of the program.

  19. Program for three-phase power transformer design

    Directory of Open Access Journals (Sweden)

    Olivian Chiver

    2011-12-01

    Full Text Available This paper presents a program developed for designing three-phase power transformers used in power systems. The program was developed in Visual Basic because this programming language allows us to realize a friendly and suggestive interface with minimum effort. The second reason, which is the most important, is to use Visual Basic, because this language is recognized by the used finite elements analysis (FEA software, MagNet produced by Infolytica. This software package is designed for calculation of the magnetic field of electromagnetic devices and machines. The 3D components of the numerical model are carried out using CATIA program, automatically, based on the calculated main geometric data.

  20. Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

    Directory of Open Access Journals (Sweden)

    Bryanna Hahn Fox

    2012-12-01

    Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

  1. Design of benign matrix drums for the non-destructive assay performance demonstration program for the National TRU Program

    Energy Technology Data Exchange (ETDEWEB)

    Becker, G.K.

    1996-09-01

    Regulatory compliance programs associated with the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Transuranic (TRU) Waste Characterization Program (the Program) require the collection of waste characterization data of known quality to support repository performance assessment, permitting, and associated activities. Blind audit samples, referred to as PDP (performance demonstration program) samples, are devices used in the NDA PDP program to acquire waste NDA system performance data per defined measurement routines. As defined under the current NDA PDP Program Plan, a PDP sample consists of a DOT 17C 55-gallon PDP matrix drum configured with insertable radioactive standards, working reference materials (WRMs). The particular manner in which the matrix drum and PDP standard(s) are combined is a function of the waste NDA system performance test objectives of a given cycle. The scope of this document is confined to the design of the PDP drum radioactive standard internal support structure, the matrix type and the as installed configuration. The term benign is used to designate a matrix possessing properties which are nominally non-interfering to waste NDA measurement techniques. Measurement interference sources are technique specific but include attributes such as: high matrix density, heterogeneous matrix distributions, matrix compositions containing high moderator/high Z element concentrations, etc. To the extent practicable the matrix drum design should not unduly bias one NDA modality over another due to the manner in which the matrix drum configuration manifests itself to the measurement system. To this end the PDP matrix drum configuration and composition detailed below is driven primarily by the intent to minimize the incorporation of matrix attributes known to interfere with fundamental waste NDA modalities, i.e. neutron and gamma based techniques.

  2. Design of benign matrix drums for the non-destructive assay performance demonstration program for the National TRU Program

    International Nuclear Information System (INIS)

    Becker, G.K.

    1996-09-01

    Regulatory compliance programs associated with the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Transuranic (TRU) Waste Characterization Program (the Program) require the collection of waste characterization data of known quality to support repository performance assessment, permitting, and associated activities. Blind audit samples, referred to as PDP (performance demonstration program) samples, are devices used in the NDA PDP program to acquire waste NDA system performance data per defined measurement routines. As defined under the current NDA PDP Program Plan, a PDP sample consists of a DOT 17C 55-gallon PDP matrix drum configured with insertable radioactive standards, working reference materials (WRMs). The particular manner in which the matrix drum and PDP standard(s) are combined is a function of the waste NDA system performance test objectives of a given cycle. The scope of this document is confined to the design of the PDP drum radioactive standard internal support structure, the matrix type and the as installed configuration. The term benign is used to designate a matrix possessing properties which are nominally non-interfering to waste NDA measurement techniques. Measurement interference sources are technique specific but include attributes such as: high matrix density, heterogeneous matrix distributions, matrix compositions containing high moderator/high Z element concentrations, etc. To the extent practicable the matrix drum design should not unduly bias one NDA modality over another due to the manner in which the matrix drum configuration manifests itself to the measurement system. To this end the PDP matrix drum configuration and composition detailed below is driven primarily by the intent to minimize the incorporation of matrix attributes known to interfere with fundamental waste NDA modalities, i.e. neutron and gamma based techniques

  3. Software tools to aid Pascal and Ada program design

    Energy Technology Data Exchange (ETDEWEB)

    Jankowitz, H.T.

    1987-01-01

    This thesis describes a software tool which analyses the style and structure of Pascal and Ada programs by ensuring that some minimum design requirements are fulfilled. The tool is used in much the same way as a compiler is used to teach students the syntax of a language, only in this case issues related to the design and structure of the program are of paramount importance. The tool operates by analyzing the design and structure of a syntactically correct program, automatically generating a report detailing changes that need to be made in order to ensure that the program is structurally sound. The author discusses how the model gradually evolved from a plagiarism detection system which extracted several measurable characteristics in a program to a model that analyzed the style of Pascal programs. In order to incorporate more-sophistical concepts like data abstraction, information hiding and data protection, this model was then extended to analyze the composition of Ada programs. The Ada model takes full advantage of facilities offered in the language and by using this tool the standard and quality of written programs is raised whilst the fundamental principles of program design are grasped through a process of self-tuition.

  4. Empowerment and programs designed to address domestic violence.

    Science.gov (United States)

    Kasturirangan, Aarati

    2008-12-01

    Programs designed to address domestic violence often name empowerment of women as a major program goal. However, programs do not necessarily define what empowerment for survivors of domestic violence entails. This review examines the literature on empowerment, including characteristics of an empowerment process and critiques of empowerment. Diversity of goals for empowerment and differences in access to resources for women experiencing domestic violence are explored as two major factors that should inform program development. Recommendations are offered for developing programs to address domestic violence that support women engaged in an empowerment process.

  5. An assessment of design control practices and design reconstitution programs in the nuclear power industry

    International Nuclear Information System (INIS)

    Imbro, E.V.

    1991-02-01

    The US Nuclear Regulatory Commission (NRC) and the utilities have identified shortcomings involving the maintenance of well-defined design bases and the availability of the necessary supporting design documentation. Many utilities have embarked on design-document reconstitution programs although there has been no clear consensus regarding what information should be included in design-bases documents, what is the minimum set of necessary design documents to support the design bases, or how missing or deficient design documentation should be handled. The NRC initiated a survey to ascertain the status of design control programs within the industry and the approaches to design-bases documentation used by some utilities. The survey scope included six utilities and one nuclear steam supply system vendor. Conclusions and observations resulting from the survey assessments are provided so that utilities and the NRC can consider actions to improve these programs. 12 refs

  6. Designing Camera Networks by Convex Quadratic Programming

    KAUST Repository

    Ghanem, Bernard

    2015-05-04

    ​In this paper, we study the problem of automatic camera placement for computer graphics and computer vision applications. We extend the problem formulations of previous work by proposing a novel way to incorporate visibility constraints and camera-to-camera relationships. For example, the placement solution can be encouraged to have cameras that image the same important locations from different viewing directions, which can enable reconstruction and surveillance tasks to perform better. We show that the general camera placement problem can be formulated mathematically as a convex binary quadratic program (BQP) under linear constraints. Moreover, we propose an optimization strategy with a favorable trade-off between speed and solution quality. Our solution is almost as fast as a greedy treatment of the problem, but the quality is significantly higher, so much so that it is comparable to exact solutions that take orders of magnitude more computation time. Because it is computationally attractive, our method also allows users to explore the space of solutions for variations in input parameters. To evaluate its effectiveness, we show a range of 3D results on real-world floorplans (garage, hotel, mall, and airport). ​

  7. Designing a Flood-Risk Education Program in the Netherlands

    Science.gov (United States)

    Bosschaart, Adwin; van der Schee, Joop; Kuiper, Wilmad

    2016-01-01

    This study focused on designing a flood-risk education program to enhance 15-year-old students' flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information processing. In this way, understanding of flood…

  8. Designing a flood-risk education program in the Netherlands

    NARCIS (Netherlands)

    Bosschaert, A.; van der Schee, J.; Kuiper, W.

    2016-01-01

    This study focused on designing a flood-risk education program to enhance 15-year-old students’ flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information

  9. Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

    Science.gov (United States)

    Miller, Beth R.

    2017-01-01

    The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

  10. Situated Research Design and Methodological Choices in Formative Program Evaluation

    Science.gov (United States)

    Supovitz, Jonathan

    2013-01-01

    Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

  11. Scrap your boilerplate: a practical design pattern for generic programming

    NARCIS (Netherlands)

    R. Lämmel (Ralf); S. Peyton Jones

    2003-01-01

    textabstractWe describe a design pattern for writing programs that traverse data structures built from rich mutually-recursive data types. Such programs often have a great deal of 'boilerplate' code that simply walks the structure, hiding a small amount of 'real' code that constitutes the reason for

  12. Designing and Deploying Programming Courses: Strategies, Tools, Difficulties and Pedagogy

    Science.gov (United States)

    Xinogalos, Stelios

    2016-01-01

    Designing and deploying programming courses is undoubtedly a challenging task. In this paper, an attempt to analyze important aspects of a sequence of two courses on imperative-procedural and object-oriented programming in a non-CS majors Department is made. This analysis is based on a questionnaire filled in by fifty students in a voluntary…

  13. Toroidal transformer design program with application to inverter circuitry

    Science.gov (United States)

    Dayton, J. A., Jr.

    1972-01-01

    Estimates of temperature, weight, efficiency, regulation, and final dimensions are included in the output of the computer program for the design of transformers for use in the basic parallel inverter. The program, written in FORTRAN 4, selects a tape wound toroidal magnetic core and, taking temperature, materials, core geometry, skin depth, and ohmic losses into account, chooses the appropriate wire sizes and number of turns for the center tapped primary and single secondary coils. Using the program, 2- and 4-kilovolt-ampere transformers are designed for frequencies from 200 to 3200 Hz and the efficiency of a basic transistor inverter is estimated.

  14. Designing an Elderly Assistance Program Based-on Home Care

    Science.gov (United States)

    Umusya'adah, L.; Juwaedah, A.; Jubaedah, Y.; Ratnasusanti, H.; Puspita, R. H.

    2018-02-01

    PKH (Program Keluarga Harapan) is a program of Indonesia’s Government through the ministry of social directorate to accelerate the poverty reduction and the achievement of Millennium Development Goals (MDGs) target as well as the policies development in social protection and social welfare domain or commonly referred to as Indonesian Conditional Cash Transfer (CCT) Program. This research is motivated that existing participants of the family expectation program (PKH) that already exist in Sumedang, Indoensia, especially in the South Sumedang on the social welfare components is only limited to the health checking, while for assisting the elderly based Home Care program there has been no structured and systematic, where as the elderly still need assistance, especially from the family and community environment. This study uses a method of Research and Development with Model Addie which include analysis, design, development, implementation and evaluation. Participants in this study using purposive sampling, where selected families of PKH who provide active assistance to the elderly with 82 participants. The program is designed consists of program components: objectives, goals, forms of assistance, organizing institutions and implementing the program, besides, program modules include assisting the elderly. Form of assistance the elderly cover physical, social, mental and spiritual. Recommended for families and companions PKH, the program can be implemented to meet the various needs of the elderly. For the elderly should introspect, especially in the health and follow the advice recommended by related parties

  15. Multimedia programming using Max/MSP and TouchDesigner

    CERN Document Server

    Lechner, Patrik

    2014-01-01

    If you want to learn how to use Max 6 and/or TouchDesigner, or work in audio-visual real-time processing, this is the book for you. It is intended for intermediate users of both programs and can be helpful for artists, designers, musicians, VJs, and researchers. A basic understanding of audio principles is advantageous.

  16. Incremental approximate dynamic programming for nonlinear flight control design

    NARCIS (Netherlands)

    Zhou, Y.; Van Kampen, E.J.; Chu, Q.P.

    2015-01-01

    A self-learning adaptive flight control design for non-linear systems allows reliable and effective operation of flight vehicles in a dynamic environment. Approximate dynamic programming (ADP) provides a model-free and computationally effective process for designing adaptive linear optimal

  17. A world-class design for the Chinese Nuclear Program

    International Nuclear Information System (INIS)

    Ruiz, A.; Valero, E.

    1999-01-01

    Under the name Grupo Nuclear SEPI, the companies BWE, ENDESA, ENSA, ENRESA, ENUSA and INITEC, in a partnership in SEPI and with extensive experience in the nuclear sector, have in the last few years been coordinating technical and commercial actions targeted primarily at the Chinese nuclear market. These actions have been carried out under Westinghouse's leadership, for the purpose of providing a 1000 MWe nuclear Power plant design tailored to the local requirements defined by experts and authorities of the People's Republic of China (project CPWR 1000). (Author)

  18. Generative design visualize, program, and create with processing

    CERN Document Server

    Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius

    2012-01-01

    Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

  19. Designing PV Incentive Programs to Promote System Performance: AReview of Current Practice

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-11-12

    rather than the rated capacity of the modules or system, are often suggested as one possible strategy. Somewhat less recognized are the many other program design options also available, each with its particular advantages and disadvantages. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance - including, but not limited to, PBIs - used by 32 prominent PV incentive programs in the U.S. (see Table 1).1 We focus specifically on programs that offer an explicit subsidy payment for customer-sited PV installations. PV support programs that offer other forms of financial support or that function primarily as a mechanism for purchasing renewable energy credits (RECs) through energy production-based payments are outside the scope of our review.2 The information presented herein is derived primarily from publicly available sources, including program websites and guidebooks, programs evaluations, and conference papers, as well as from a limited number of personal communications with program staff. The remainder of this report is organized as follows. The next section presents a simple conceptual framework for understanding the issues that affect PV system performance and provides an overview of the eight general strategies to encourage performance used among the programs reviewed in this report. The subsequent eight sections discuss in greater detail each of these program design strategies and describe how they have been implemented among the programs surveyed. Based on this review, we then offer a series of recommendations for how PV incentive programs can effectively promote PV system performance.

  20. A comparison of three different ray trace programs for x-ray and infrared synchrotron beamline designs

    International Nuclear Information System (INIS)

    Irick, S.C.; Jung, C.R.

    1997-07-01

    There are a number of ray trace programs currently used for the design of synchrotron beamlines. While several of these programs have been written and used mostly within the programmer''s institution, many have also been available to the general public. This paper discusses three such programs. One is a commercial product oriented for the general optical designer (not specifically for synchrotron beamlines). One is designed for synchrotron beamlines and is free with restricted availability. Finally, one is designed for synchrotron beamlines and is used primarily in one institution. The wealth of information from general optical materials and components catalogs is readily available in the commercial program for general optical designs. This makes the design of an infrared beamline easier from the standpoint of component selection. However, this program is not easily configured for synchrotron beamline designs, particularly for a bending magnet source. The synchrotron ray trace programs offer a variety of sources, but generally are not as easy to use from the standpoint of the user interface. This paper shows ray traces of the same beamline Optikwerks, SHADOW, and RAY, and compares the results

  1. The design and implementation of vehicle scrapping programs

    International Nuclear Information System (INIS)

    Sahu, R.; Baxter, R.A.

    1993-01-01

    A number of metropolitan air basins in the US are currently faced with increased difficulty in attaining national and regional clean air standards. Significant controls on stationary sources over the years have allowed mobile sources to become the primary source of air emission in many areas. Programs allowing the use of mobile source offsets for stationary source emission by removal of older, higher emitting vehicles through scrappage programs are, therefore, conceptually attractive and are starting to be implemented. However, achieving success in such scrappage programs is a challenge given the associated technical, economic and social issues. This paper presents a discussion of the important issues that must be considered if vehicle scrappage programs are to be successful, including recent guidance and views of the EPA and state governments on the credits associated with the programs. Although the main focus of such programs is the reduction of criteria pollutants (CO, ROG, NO x , and PM 10 ), the impact on air toxics also has to be considered. The paper will then focus on the technical design of vehicle scrappage programs such that the resulting credits are real, verifiable, enforceable, and cost-effective. Information available under existing vehicle I/M programs along with economic, vehicle maintenance, and geographic data will be used with statistical techniques in order to meet predetermined program goals regarding emissions reduction and cost-effectiveness. A later case-study paper will discuss the actual implementation of such as program in an ozone non-attainment area

  2. Designing optimal mixtures using generalized disjunctive programming: Hull relaxations

    OpenAIRE

    Jonuzaj, S; Adjiman, CSJ

    2016-01-01

    A general modeling framework for mixture design problems, which integrates Generalized Disjunctive Programming (GDP) into the Computer-Aided Mixture/blend Design (CAMbD) framework, was recently proposed (S. Jonuzaj, P.T. Akula, P.-M. Kleniati, C.S. Adjiman, 2016. AIChE Journal 62, 1616???1633). In this paper we derive Hull Relaxations (HR) of GDP mixture design problems as an alternative to the big-M (BM) approach presented in this earlier work. We show that in restricted mixture design probl...

  3. Design and Implementation of Modular Software for Programming Mobile Robots

    Directory of Open Access Journals (Sweden)

    Alessandro Farinelli

    2006-03-01

    Full Text Available This article describes a software development toolkit for programming mobile robots, that has been used on different platforms and for different robotic applications. We address design choices, implementation issues and results in the realization of our robot programming environment, that has been devised and built from many people since 1998. We believe that the proposed framework is extremely useful not only for experienced robotic software developers, but also for students approaching robotic research projects.

  4. Best Practices in the Design of Aerobic Training Programs

    Science.gov (United States)

    2010-03-02

    A., & Nadel, E. R. (1993). Effect of exercise training on cardiopulmonary baroreflex control of forearm vascular resistance in humans. Med Sci...Naval Health Research Center Best Practices in the Design of Aerobic Training Programs Jason Jameson, Ph.D. Ross R. Vickers Jr., Ph.D...Aerobic Training Programs Jason Jameson Ross R. Vickers, Jr. Warfighter Performance Department Naval Health Research Center 140 Sylvester Road

  5. Controlled Optimal Design Program for the Logit Dose Response Model

    Directory of Open Access Journals (Sweden)

    Jiaqiao Hu

    2010-10-01

    Full Text Available The assessment of dose-response is an integral component of the drug development process. Parallel dose-response studies are conducted, customarily, in preclinical and phase 1, 2 clinical trials for this purpose. Practical constraints on dose range, dose levels and dose proportions are intrinsic issues in the design of dose response studies because of drug toxicity, efficacy, FDA regulations, protocol requirements, clinical trial logistics, and marketing issues. We provide a free on-line software package called Controlled Optimal Design 2.0 for generating controlled optimal designs that can incorporate prior information and multiple objectives, and meet multiple practical constraints at the same time. Researchers can either run the web-based design program or download its stand-alone version to construct the desired multiple-objective controlled Bayesian optimal designs. Because researchers often adopt ad-hoc design schemes such as the equal allocation rules without knowing how efficient such designs would be for the design problem, the program also evaluates the efficiency of user-supplied designs.

  6. Program Design Report of the CNC Machine Tool(II)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2007-06-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  7. Program Design Report of the CNC Machine Tool(III)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2008-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  8. Program Design Report of the CNC Machine Tool(IV)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-09-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  9. Program Design Report of the CNC Machine Tool (I)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.

    2006-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  10. A general-purpose optimization program for engineering design

    Science.gov (United States)

    Vanderplaats, G. N.; Sugimoto, H.

    1986-01-01

    A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis) is a FORTRAN program for nonlinear constrained (or unconstrained) function minimization. The optimization process is segmented into three levels: Strategy, Optimizer, and One-dimensional search. At each level, several options are available so that a total of nearly 100 possible combinations can be created. An example of available combinations is the Augmented Lagrange Multiplier method, using the BFGS variable metric unconstrained minimization together with polynomial interpolation for the one-dimensional search.

  11. Program Design Report of the CNC Machine Tool(II)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H

    2007-06-15

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology.

  12. Design and Implementation of the Futhark Programming Language

    DEFF Research Database (Denmark)

    Henriksen, Troels

    In this thesis we describe the design and implementation of Futhark, a small data-parallel purely functional array language that offers a machine-neutral programming model, and an optimising compiler that generates efficient OpenCL code for GPUs. The overall philosophy is based on seeking a middle...... and documentation, to serve both as a basis for further research into functional array programming, and as a useful tool for parallel programming in practise....... ground between functional and imperative approaches. The specific contributions are as follows: First, we present a moderate flattening transformation aimed at enhancing the degree of parallelism, which is capable of exploiting easily accessible parallelism. Excess parallelism is efficiently...

  13. Electron ray tracing programs for gun design and beam transport

    International Nuclear Information System (INIS)

    Herrmannsfeldt, W.B.

    1988-05-01

    Computer simulation of electron and ion sources is made by using a class of computer codes known as gun design programs. In this paper, we shall first list most of the necessary and some optional capabilities of such programs. Then we will briefly note specific codes and/or authors of codes with attention to specialized applications if any. There may be many more such programs in use than are treated here; we are only trying to cover a range of examples, not perform a comprehensive survey

  14. Structural design of superconducting magnets for the large coil program

    International Nuclear Information System (INIS)

    Gray, W.H.; Long, C.J.; Stoddart, W.C.T.

    1979-09-01

    The Large Coil Program (LCP) is a research, development, and demonstration effort specifically for the advancement of the technologies involved in the production of large superconducting magnets. This paper presents a review of the status of the structural designs, analysis methods, and verification tests being performed by the participating LCP design teams in the USA, Switzerland, Japan, and the Federal Republic of Germany. The significant structural mechanics concerns that are being investigated with the LCP are presented

  15. European R D programs on innovative fuel designs

    Energy Technology Data Exchange (ETDEWEB)

    Millet, P.; Languille, A. (Commissariat a l' Energie Atomique, Saint-Paul-les-Durance (France)); Brown, C. (United Kingdom Atomic Energy Authority, Caithness (United Kingdom)); Muehling, G. (Kernforschungsanlage Juelich (Germany))

    1992-01-01

    Innovative fuel design studies being carried out in Europe are designed to improve the economy (fuel cycle cost reduction) and safety of future fast reactors. This paper reports on the main research and development (R D) programs under consideration for the following: (1) dense fuels and more particularly nitride fuels; (2) advanced fuel concepts such as axially heterogeneous, vented, and fuel moderated; and (3) advanced cladding materials, especially oxide dispersion strengthened (ODS).

  16. Issues and Approaches in the Design of Distributed Ada Programs.

    Science.gov (United States)

    1989-10-11

    COVERED 11 October 1989 jFinal ____________ 4- ILE AND SUBTITLE . FUID "N NUMES Issues and Approaches in the Design of Distributed Ada PR E45146 Programs...connections between end systems and provides end-to-end flow control and error control. The transport layer was designed according to the ISO standards...34out-of-band" data transfer, bypassing the flow control mechanisms of the transport layer. Message control types were included in the kernel to

  17. Design-reliability assurance program application to ACP600

    International Nuclear Information System (INIS)

    Zhichao, Huang; Bo, Zhao

    2012-01-01

    ACP600 is a newly nuclear power plant technology made by CNNC in China and it is based on the Generation III NPPs design experience and general safety goals. The ACP600 Design Reliability Assurance Program (D-RAP) is implemented as an integral part of the ACP600 design process. A RAP is a formal management system which assures the collection of important characteristic information about plant performance throughout each phase of its life and directs the use of this information in the implementation of analytical and management process which are specifically designed to meet two specific objects: confirm the plant goals and cost effective improvements. In general, typical reliability assurance program have 4 broad functional elements: 1) Goals and performance criteria; 2) Management system and implementing procedures; 3) Analytical tools and investigative methods; and 4) Information management. In this paper we will use the D-RAP technical and Risk-Informed requirements, and establish the RAM and PSA model to optimize the ACP600 design. Compared with previous design process, the D-RAP is more competent for the higher design targets and requirements, enjoying more creativity through an easier implementation of technical breakthroughs. By using D-RAP, the plants goals, system goals, performance criteria and safety criteria can be easier to realize, and the design can be optimized and more rational

  18. Material Programming: a Design Practice for Computational Composites

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

    2016-01-01

    -site explorations, and finally a reasonable level of complexity in couplings between input and output. We propose material programming knowing that the technology and materials are not entirely ready to support this practice yet, however, we are certain they will be and that the interaction design community...

  19. Universal Instructional Design as a Model for Educational Programs

    Science.gov (United States)

    Higbee, Jeanne L.

    2007-01-01

    This article describes Universal Instructional Design as an inclusive pedagogical model for use in educational programs, whether provided by traditional educational institutions, community-based initiatives, or workplace literacy projects. For the benefit of public relations specialists and classroom educators alike, the article begins with a…

  20. Mathematical-programming approaches to test item pool design

    NARCIS (Netherlands)

    Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

    2002-01-01

    This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

  1. Processing a programming handbook for visual designers and artists

    CERN Document Server

    Reas, Casey

    2014-01-01

    The visual arts are rapidly changing as media moves into the web, mobile devices, and architecture. When designers and artists learn the basics of writing software, they develop a new form of literacy that enables them to create new media for the present, and to imagine future media that are beyond the capacities of current software tools. This book introduces this new literacy by teaching computer programming within the context of the visual arts. It offers a comprehensive reference and text for Processing (www.processing.org), an open-source programming language that can be used by students, artists, designers, architects, researchers, and anyone who wants to program images, animation, and interactivity. Written by Processing's cofounders, the book offers a definitive reference for students and professionals. Tutorial chapters make up the bulk of the book; advanced professional projects from such domains as animation, performance, and installation are discussed in interviews with their creators. This secon...

  2. ITER tungsten divertor design development and qualification program

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, T., E-mail: takeshi.hirai@iter.org [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Escourbiac, F.; Carpentier-Chouchana, S.; Fedosov, A.; Ferrand, L.; Jokinen, T.; Komarov, V.; Kukushkin, A.; Merola, M.; Mitteau, R.; Pitts, R.A.; Shu, W.; Sugihara, M. [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Riccardi, B. [F4E, c/ Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Suzuki, S. [JAEA, Fusion Research and Development Directorate JAEA, 801-1 Mukouyama, Naka, Ibaragi 311-0193 (Japan); Villari, R. [Associazione EURATOM-ENEA sulla Fusione, Via Enrico Fermi 45, I-00044 Frascati, Rome (Italy)

    2013-10-15

    Highlights: • Detailed design development plan for the ITER tungsten divertor. • Latest status of the ITER tungsten divertor design. • Brief overview of qualification program for the ITER tungsten divertor and status of R and D activity. -- Abstract: In November 2011, the ITER Council has endorsed the recommendation that a period of up to 2 years be set to develop a full-tungsten divertor design and accelerate technology qualification in view of a possible decision to start operation with a divertor having a full-tungsten plasma-facing surface. To ensure a solid foundation for such a decision, a full tungsten divertor design, together with a demonstration of the necessary high performance tungsten monoblock technology should be completed within the required timescale. The status of both the design and technology R and D activity is summarized in this paper.

  3. Basic design of parallel computational program for probabilistic structural analysis

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Arai, Taketoshi; Gu, Wenwei; Nakamura, Hitoshi

    1999-06-01

    In our laboratory, for 'development of damage evaluation method of structural brittle materials by microscopic fracture mechanics and probabilistic theory' (nuclear computational science cross-over research) we examine computational method related to super parallel computation system which is coupled with material strength theory based on microscopic fracture mechanics for latent cracks and continuum structural model to develop new structural reliability evaluation methods for ceramic structures. This technical report is the review results regarding probabilistic structural mechanics theory, basic terms of formula and program methods of parallel computation which are related to principal terms in basic design of computational mechanics program. (author)

  4. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

    1982-03-01

    As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume discusses the design, performance and failures of feed pumps, and recommendations for research on pump dynamics, design, and specifications.

  5. Utility Green Pricing Programs: Design, Implementation, and Consumer Response

    Energy Technology Data Exchange (ETDEWEB)

    Bird, L.; Swezey, B.; Aabakken, J.

    2004-02-01

    The term green pricing refers to programs offered by utilities in traditionally regulated electricity markets, which allow customers to support the development of renewable energy sources by paying a small premium on their electric bills. Since the introduction of the concept in the United States, the number of unique utility green pricing programs has expanded from just a few programs in 1993 to more than 90 in 2002. About 10% of U.S. utilities offered a green pricing option to about 26 million consumers by the end of 2002. This report provides: (1) aggregate industry data on consumer response to utility programs, which indicate the collective impact of green pricing on renewable energy development nationally; and (2) market data that can be used by utilities as a benchmark for gauging the relative success of their green pricing programs. Specifically, the paper presents current data and trends in consumer response to green pricing, as measured by renewable energy sales, participants, participation rates, and new renewable energy capacity supported. It presents data on various aspects of program design and implementation, such as product pricing, ownership of supplies, retention rates, marketing costs, the effectiveness of marketing techniques, and methods of enrolling and providing value to customers.

  6. MPprimer: a program for reliable multiplex PCR primer design

    Directory of Open Access Journals (Sweden)

    Wang Xiaolei

    2010-03-01

    Full Text Available Abstract Background Multiplex PCR, defined as the simultaneous amplification of multiple regions of a DNA template or multiple DNA templates using more than one primer set (comprising a forward primer and a reverse primer in one tube, has been widely used in diagnostic applications of clinical and environmental microbiology studies. However, primer design for multiplex PCR is still a challenging problem and several factors need to be considered. These problems include mis-priming due to nonspecific binding to non-target DNA templates, primer dimerization, and the inability to separate and purify DNA amplicons with similar electrophoretic mobility. Results A program named MPprimer was developed to help users for reliable multiplex PCR primer design. It employs the widely used primer design program Primer3 and the primer specificity evaluation program MFEprimer to design and evaluate the candidate primers based on genomic or transcript DNA database, followed by careful examination to avoid primer dimerization. The graph-expanding algorithm derived from the greedy algorithm was used to determine the optimal primer set combinations (PSCs for multiplex PCR assay. In addition, MPprimer provides a virtual electrophotogram to help users choose the best PSC. The experimental validation from 2× to 5× plex PCR demonstrates the reliability of MPprimer. As another example, MPprimer is able to design the multiplex PCR primers for DMD (dystrophin gene which caused Duchenne Muscular Dystrophy, which has 79 exons, for 20×, 20×, 20×, 14×, and 5× plex PCR reactions in five tubes to detect underlying exon deletions. Conclusions MPprimer is a valuable tool for designing specific, non-dimerizing primer set combinations with constrained amplicons size for multiplex PCR assays.

  7. Design basis programs and improvements in plant operation

    International Nuclear Information System (INIS)

    Metcalf, M.F.

    1991-01-01

    Public Service Electric and Gas (PSE and G) Company operates three commercial nuclear power plants in southern New Jersey. The three plants are of different designs and vintages (two pressurized water reactors licensed in 1976 and 1980 and one boiling water reactor licensed in 1986). As the industry recognized the need to develop design basis programs, PSE and G also realized the need after a voluntary 52-day shutdown of one unit because of electrical design basis problems. In its drive to be a premier electric utility, PSE and G has been aggressively active in developing design basis documents (DBDs) with supporting projects and refined uses to obtain the expected value and see the return on investment. Progress on Salem is nearly 75% complete, while Hope Creek is 20% complete. To data, PSE and G has experienced success in the use of DBDs in areas such as development of plant modifications, development of the reliability-centered maintenance program, procedure upgrades, improved document retrieval, resolution of regulatory issues, and training. The paper examines the design basis development process, supporting projects, and expected improvements in plant operations as a result of these efforts

  8. Extending cluster lot quality assurance sampling designs for surveillance programs.

    Science.gov (United States)

    Hund, Lauren; Pagano, Marcello

    2014-07-20

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

  9. Designing ceramic components with the CARES computer program

    Science.gov (United States)

    Nemeth, Noel N.; Manderscheid, Jane M.; Gyekenyesi, John P.

    1989-01-01

    NASA-Lewis has developed a public-domain computer program, designated 'Ceramic Analysis and Reliability Evaluation of Structures' (CARES) for calculating the fast-fracture reliability of macroscopically isotropic ceramic components subjected to the complex thermomechanical loadings typical of heat engines. The design methodology employed by CARES encompasses linear elastic fracture mechanics theory, extreme value statistics, and material microstructures; component integrity is conceived as a function of the entire field solution of the stresses, rather than being based solely on the most highly stressed point.

  10. CR mammography: Design and implementation of a quality control program

    Energy Technology Data Exchange (ETDEWEB)

    Moreno-Ramirez, A.; Brandan, M. E.; Villasenor-Navarro, Y.; Galvan, H. A.; Ruiz-Trejo, C. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico); Departamento de Radiodiagnostico, Instituto Nacional de Cancerologia, DF 14080 (Mexico); Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico)

    2012-10-23

    Despite the recent acquisition of significant quantities of computed radiography CR equipment for mammography, Mexican regulations do not specify the performance requirements for digital systems such as those of CR type. The design of a quality control program QCP specific for CR mammography systems was thus considered relevant. International protocols were taken as reference to define tests, procedures and acceptance criteria. The designed QCP was applied in three CR mammography facilities. Important deficiencies in spatial resolution, noise, image receptor homogeneity, artifacts and breast thickness compensation were detected.

  11. ATF Neutron Irradiation Program Irradiation Vehicle Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, J. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Katoh, Yutai [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Howard, Richard H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Cetiner, N. O. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Petrie, Christian M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Smith, Kurt R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; McDuffee, J. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division

    2016-03-01

    The Japan Atomic Energy Agency (JAEA) under the Civil Nuclear Energy Working Group (CNWG) is engaged in a cooperative research effort with the U.S. Department of Energy (DOE) to explore issues related to nuclear energy, including research on accident-tolerant fuels and materials for use in light water reactors. This work develops a draft technical plan for a neutron irradiation program on the candidate accident-tolerant fuel cladding materials and elements using the High Flux Isotope Reactor (HFIR). The research program requires the design of a detailed experiment, development of test vehicles, irradiation of test specimens, possible post irradiation examination and characterization of irradiated materials and the shipment of irradiated materials to Japan. This report discusses the conceptual design, the development and irradiation of the test vehicles.

  12. Designing a behavioral program for a barrio in Tegucigalpa, Honduras

    OpenAIRE

    Cohen, Harold L.

    1994-01-01

    Health in Housing initiated a behavioral program of education and skills training for children and adults in a community of 30,000 persons living in substandard conditions in Tegucigalpa, Honduras. To measure achievement in the long-range project, 21 families of Flor del Campo participated in a preliminary three-part survey of their (a) health, (b) housing and the environment, and (c) family history. Doctors, designers, and educators worked with Honduran personnel in the first survey. Followi...

  13. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

    1982-03-01

    As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume contains appendixes on pump design, cavitation damage, performance testing, hydraulics, two-phase flow in pumps, flow stability, and rotor dynamics.

  14. Building interactive simulations in a Web page design program.

    Science.gov (United States)

    Kootsey, J Mailen; Siriphongs, Daniel; McAuley, Grant

    2004-01-01

    A new Web software architecture, NumberLinX (NLX), has been integrated into a commercial Web design program to produce a drag-and-drop environment for building interactive simulations. NLX is a library of reusable objects written in Java, including input, output, calculation, and control objects. The NLX objects were added to the palette of available objects in the Web design program to be selected and dropped on a page. Inserting an object in a Web page is accomplished by adding a template block of HTML code to the page file. HTML parameters in the block must be set to user-supplied values, so the HTML code is generated dynamically, based on user entries in a popup form. Implementing the object inspector for each object permits the user to edit object attributes in a form window. Except for model definition, the combination of the NLX architecture and the Web design program permits construction of interactive simulation pages without writing or inspecting code.

  15. Environmental monitoring program design for uranium refining and conversion operations

    International Nuclear Information System (INIS)

    1984-08-01

    The objective of this study was to develop recommendations for the design of environmental monitoring programs at Canadian uranium refining and conversion operations. In order to develop monitoring priorities, chemical and radioactive releases to the air and water were developed for reference uranium refining and conversion facilities. The relative significance of the radioactive releases was evaluated through a pathways analysis which estimated dose to individual members of the critical receptor group. The effects of chemical releases to the environment were assessed by comparing predicted air and water contaminant levels to appropriate standards or guidelines. For the reference facilities studied, the analysis suggested that environmental effects are likely to be dominated by airborne release of both radioactive and nonradioactive contaminants. Uranium was found to be the most important radioactive species released to the air and can serve as an overall indicator of radiological impacts for any of the plants considered. The most important nonradioactive air emission was found to be fluoride (as hydrogen fluoride) from the uranium hexafluoride plant. For the uranium trioxide and uranium dioxide plants, air emissions of oxides of nitrogen were considered to be most important. The study recommendations for the design of an environmental monitoring program are based on consideration of those factors most likely to affect local air and water quality, and human radiation exposure. Site- and facility-specific factors will affect monitoring program design and the selection of components such as sampling media, locations and frequency, and analytical methods

  16. Object-oriented design and programming in medical decision support.

    Science.gov (United States)

    Heathfield, H; Armstrong, J; Kirkham, N

    1991-12-01

    The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

  17. Automatic design of synthetic gene circuits through mixed integer non-linear programming.

    Science.gov (United States)

    Huynh, Linh; Kececioglu, John; Köppe, Matthias; Tagkopoulos, Ilias

    2012-01-01

    Automatic design of synthetic gene circuits poses a significant challenge to synthetic biology, primarily due to the complexity of biological systems, and the lack of rigorous optimization methods that can cope with the combinatorial explosion as the number of biological parts increases. Current optimization methods for synthetic gene design rely on heuristic algorithms that are usually not deterministic, deliver sub-optimal solutions, and provide no guaranties on convergence or error bounds. Here, we introduce an optimization framework for the problem of part selection in synthetic gene circuits that is based on mixed integer non-linear programming (MINLP), which is a deterministic method that finds the globally optimal solution and guarantees convergence in finite time. Given a synthetic gene circuit, a library of characterized parts, and user-defined constraints, our method can find the optimal selection of parts that satisfy the constraints and best approximates the objective function given by the user. We evaluated the proposed method in the design of three synthetic circuits (a toggle switch, a transcriptional cascade, and a band detector), with both experimentally constructed and synthetic promoter libraries. Scalability and robustness analysis shows that the proposed framework scales well with the library size and the solution space. The work described here is a step towards a unifying, realistic framework for the automated design of biological circuits.

  18. Design and Analysis of Solar Smartflower Simulation by Solidwork Program

    Science.gov (United States)

    Mulyana, Tatang; Sebayang, Darwin; Fajrina, Fildzah; Raihan; Faizal, M.

    2018-03-01

    The potential of solar energy that is so large in Indonesia can be a driving force for the use of renewable energy as a solution for energy needs. Government with the community can utilize and optimize this technology to increase the electrification ratio up to 100% in all corners of Indonesia. Because of its modular and practical nature, making this technology easy to apply. One of the latest imported products that have started to be offered and sold in Indonesia but not yet widely used for solar power generation is the kind of smartflower. Before using the product, it is of course very important and immediately to undertake an in-depth study of the utilization, use, maintenance, repair, component supply and fabrication. The best way to know the above is through a review of the design and simulation. To meet this need, this paper presents a solar-smartflower design and then simulated using the facilities available in the solidwork program. Solid simulation express is a tool that serves to create power simulation of a design part modelling. With the simulation is very helpful at all to reduce errors in making design. Accurate or not a design created is also influenced by several other factors such as material objects, the silent part of the part, and the load given. The simulation is static simulation and body battery drop test, and based on the results of this simulation is known that the design results have been very satisfactory.

  19. Designing building energy efficiency programs for greenhouse gas reductions

    International Nuclear Information System (INIS)

    Blackhurst, Michael; Lima Azevedo, Ines; Scott Matthews, H.; Hendrickson, Chris T.

    2011-01-01

    Costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. The analysis includes electricity and natural gas consumption, covering 75% of building energy consumption in Pittsburgh and 85% in Austin. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings, and GHG reductions. Results suggest uncertainty in local stocks, demands, and efficiency significantly impacts anticipated outcomes. Annual GHG reductions of 1 ton CO 2 eq/capita/yr in Pittsburgh could cost near nothing or over $20 per capita annually. Capital-constrained policies generate slightly less social savings (a present value of a few hundred dollars per capita) than policies that maximize social savings. However, sectors and end uses targeted for intervention vary depending on policy objectives and constraints. Optimal efficiency investment strategies for some end uses vary significantly (in excess of 100%) between Pittsburgh and Austin, suggesting that resources and guidance conducted at the national scale may mislead state and local decision-makers. Results are used to provide recommendations for efficiency program administrators. - Highlights: → We use public data to estimate local building energy costs, benefits and greenhouse gas reductions. → We use optimization to evaluate trade-offs between program objectives and capital constraints. → Local energy market conditions significantly influence efficiency expectations. → Different program objectives can lead to different effective investment strategies. → We reflect on the implications of our results for efficiency program design.

  20. Applying Program Theory-Driven Approach to Design and Evaluate a Teacher Professional Development Program

    Science.gov (United States)

    Lin, Su-ching; Wu, Ming-sui

    2016-01-01

    This study was the first year of a two-year project which applied a program theory-driven approach to evaluating the impact of teachers' professional development interventions on students' learning by using a mix of methods, qualitative inquiry, and quasi-experimental design. The current study was to show the results of using the method of…

  1. Design and approach of the Living Organ Video Educated Donors (LOVED) program to promote living kidney donation in African Americans.

    Science.gov (United States)

    Sieverdes, John C; Price, Matthew; Ruggiero, Kenneth J; Baliga, Prabhakar K; Chavin, Kenneth D; Brunner-Jackson, Brenda; Patel, Sachin; Treiber, Frank A

    2017-10-01

    To describe the rationale, methodology, design, and interventional approach of a mobile health education program designed for African Americans with end stage renal disease (ESRD) to increase knowledge and self-efficacy to approach others about their need for a living donor kidney transplant (LDKT). The Living Organ Video Educated Donors (LOVED) program is a theory-guided iterative designed, mixed methods study incorporating three phases: 1) a formative evaluation using focus groups to develop program content and approach; 2) a 2-month proof of concept trial (n=27) to primarily investigate acceptability, tolerability and investigate increases of LDKT knowledge and self-efficacy; and 3) a 6-month, 2-arm, 60-person feasibility randomized control trial (RCT) to primarily investigate increases in LDKT knowledge and self-efficacy, and secondarily, to increase the number of living donor inquiries, medical evaluations, and LDKTs. The 8-week LOVED program includes an interactive web-based app delivered on 10″ tablet computer incorporating weekly interactive video education modules, weekly group video chat sessions with an African American navigator who has had LDKT and other group interactions for support and improve strategies to promote their need for a kidney. Phase 1 and 2 have been completed and the program is currently enrolling for the feasibility RCT. Phase 2 experienced 100% retention rates with 91% adherence completing the video modules and 88% minimum adherence to the video chat sessions. We are in the early stages of an RCT to evaluate the LOVED program; to date, we have found high tolerability reported from Phase 2. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. The Malemute development program. [rocket upper stage engine design

    Science.gov (United States)

    Bolster, W. J.; Hoekstra, P. W.

    1976-01-01

    The Malemute vehicle systems are two-stage systems based on utilizing a new high performance upper stage motor with two existing military boosters. The Malmute development program is described relative to program structure, preliminary design, vehicle subsystems, and the Malemute motor. Two vehicle systems, the Nike-Malemute and Terrier-Malemute, were developed which are capable of transporting comparatively large diameter (16 in.) 200-lb payloads to altitudes of 500 and 700 km, respectively. These vehicles provide relatively low-cost transportation with two-stage reliability and launch simplicity. Flight tests of both vehicle systems revealed their performance capabilities, with the Terrier-Malemute system involving a unique Malemute motor spin sensitivity problem. It is suggested that the vehicles can be successfully flown by lowering the burnout spin rate.

  3. The US Acid Rain Program: design, performance, and assessment

    DEFF Research Database (Denmark)

    Svendsen, Gert Tinggaard

    1998-01-01

    The US Acid Rain Program (ARP) from 1990 allows 1,000 major electric utilities all over the US to trade SO2 permits. Historical emission rights have been grandfathered and the target level is 50% SO2 reduction. Market performance has been successfull with much trade activity and unexpectedly low...... permit prices. Property rights to permits have been well-defined, strictly enforced, and sources have been allowed to trade freely without administrative approval of each trade. Ignoring source location in this way has kept transaction costs at a minimum. In conclusion, the policy design of the ARP...

  4. Passamaquoddy Innovative Clean Coal Technology Program: Public design report

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The Passamaquoddy Technology Recovery Scrubber{trademark} was conceived and developed specifically to address two problems experienced by the Dragon cement plant; meeting increasingly stringent gas emission limits for sulfur dioxide, and disposing of kiln dust, containing alkali oxides, which had to be wasted in order to avoid kiln operating and product quality problems. The idea involved making the kiln dust into a slurry in order to leach out the species (primarily potassium and sulfur) which rendered it unacceptable for return to kiln feed. This slurry, the liquid part of which is an alkaline solution, acts as a scrubbing reagent for SO{sub 2} in the flue gas while CO{sub 2} in the gas serves to precipitate soluble calcium and release sulfate for combination with the potassium. The effect of the process is to scrub SO{sub 2} from kiln flue gas, extract the volatile species from the dust allowing it to be returned to the kiln, and yield a leachate comprising potassium sulfate which can be crystallized (using heat recovered from the flue gas) and sold as fertilizer. Apart from widespread application in the cement industry, it was evident that, if the process could be demonstrated, its potential would extend to any plant burning fossil fuel where an alkaline waste either occurs intrinsically or can be juxtaposed. Obvious candidates appeared to include the pulp and paper industry and waste incineration. The chemistry was proved in a 1/100th scale pilot plant using actual kiln dust and a slip stream of kiln gas. A full scale demonstration installation was commissioned in 1989 by CDN (USA), the owners of the Dragon plant with the financial support of the US Department of Energy under its innovative Clean Coal Technology Program.

  5. Commercial Spacewalking: Designing an EVA Qualification Program for Space Tourism

    Science.gov (United States)

    Gast, Matthew A.

    2010-01-01

    In the near future, accessibility to space will be opened to anyone with the means and the desire to experience the weightlessness of microgravity, and to look out upon both the curvature of the Earth and the blackness of space, from the protected, shirt-sleeved environment of a commercial spacecraft. Initial forays will be short-duration, suborbital flights, but the experience and expertise of half a century of spaceflight will soon produce commercial vehicles capable of achieving low Earth orbit. Even with the commercial space industry still in its infancy, and manned orbital flight a number of years away, there is little doubt that there will one day be a feasible and viable market for those courageous enough to venture outside the vehicle and into the void, wearing nothing but a spacesuit, armed with nothing but preflight training. What that Extravehicular Activity (EVA) preflight training entails, however, is something that has yet to be defined. A number of significant factors will influence the composition of a commercial EVA training program, but a fundamental question remains: 'what minimum training guidelines must be met to ensure a safe and successful commercial spacewalk?' Utilizing the experience gained through the development of NASA's Skills program - designed to qualify NASA and International Partner astronauts for EVA aboard the International Space Station - this paper identifies the attributes and training objectives essential to the safe conduct of an EVA, and attempts to conceptually design a comprehensive training methodology meant to represent an acceptable qualification standard.

  6. Red`s natural editor: A program designed to edit FORTRAN programs

    Energy Technology Data Exchange (ETDEWEB)

    Cullen, D.E.

    1993-09-01

    This program allows the user to edit files using a completely natural method. You don`t need a lot of time to learn how to use this program; it`s as simple as using a typewriter. Even while you are reading this report you can start editing files. Although it is as simple as using a typewriter, this is a full screen editor, so that you can overwrite (replace) anything, delete or insert characters or lines, copy or move lines, find or change anything. All of this can be done without using any complicated combinations of key strokes (as you are forced to memorize with other editors). This program is written in standard FORTRAN. Although it was designed and implemented on an IBM-PC, it can be easily adapted for use on virtually any graphics terminal.

  7. Using corneal topography design personalized cataract surgery programs

    Directory of Open Access Journals (Sweden)

    Jin-Ou Huang

    2014-08-01

    Full Text Available AIM:To investigate how to design personalized cataract surgery programs to achieve surgical correction of preoperative corneal astigmatism with surgical astigmatism under the guidance of corneal topography, improve postoperative visual quality and reduce the cost of treatment. METHODS: Totally 202 cases(226 eyescataract patients were divided into randomized treatment group and individualized treatment group. According to the method and location of the incision, randomized treatment group were divided into 8 groups. Surgical astigmatism after different incision were calculated with the use of preoperative and postoperative corneal astigmatism through vector analysis method. Individualized treatment groups were designed personably for surgical method with reference of every surgically induced astigmatism, the surgical method chooses the type of surgical incision based on close link between preoperative corneal astigmatism and surgically induced astigmatism, and the incision was located in the steep meridian. The postoperative corneal astigmatism of individualized treatment group was observed. RESULTS: Postoperative corneal astigmatism of individualized treatment group were lower than that of 3.0mm clear corneal tunnel incision in the randomized treatment group, there were statistically significance difference, while with 3.0mm sclera tunnel incision group there were no statistically significance difference. After 55.8% of patients with the use of individualized surgical plan could undergo the operation of extracapsular cataract extraction with relatively low cost and rigid intraocular lens implantation, the per capita cost of treatment could be reduced. CONCLUSION: Personalized cataract surgery programs are designed to achieve surgical correction of preoperative corneal astigmatism under the use of corneal topography, improve postoperative visual quality and reduce the cost of treatment.

  8. Ethical Issues in the Design and Implementation of Population Health Programs.

    Science.gov (United States)

    DeCamp, Matthew; Pomerantz, Daniel; Cotts, Kamala; Dzeng, Elizabeth; Farber, Neil; Lehmann, Lisa; Reynolds, P Preston; Sulmasy, Lois Snyder; Tilburt, Jon

    2018-03-01

    Spurred on by recent health care reforms and the Triple Aim's goals of improving population health outcomes, reducing health care costs, and improving the patient experience of care, emphasis on population health is increasing throughout medicine. Population health has the potential to improve patient care and health outcomes for individual patients. However, specific population health activities may not be in every patient's best interest in every circumstance, which can create ethical tensions for individual physicians and other health care professionals. Because individual medical professionals remain committed primarily to the best interests of individual patients, physicians have a unique role to play in ensuring population health supports this ethical obligation. Using widely recognized principles of medical ethics-nonmaleficence/beneficence, respect for persons, and justice-this article describes the ethical issues that may arise in contemporary population health programs and how to manage them. Attending to these principles will improve the design and implementation of population health programs and help maintain trust in the medical profession.

  9. VHTR engineering design study: intermediate heat exchanger program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-11-01

    The work reported is the result of a follow-on program to earlier Very High Temperature Reactor (VHTR) studies. The primary use of the VHTR is to provide heat for various industrial processes, such as hydrocarbon reforming and coal gasification. For many processes the use of an intermediate heat transfer barrier between the reactor coolant and the process is desirable; for some processes it is mandatory. Various intermediate heat exchanger (IHX) concepts for the VHTR were investigated with respect to safety, cost, and engineering design considerations. The reference processes chosen were steam-hydrocarbon reforming, with emphasis on the chemical heat pipe, and steam gasification of coal. The study investigates the critically important area of heat transfer between the reactor coolant, helium, and the various chemical processes.

  10. VHTR engineering design study: intermediate heat exchanger program. Final report

    International Nuclear Information System (INIS)

    1976-11-01

    The work reported is the result of a follow-on program to earlier Very High Temperature Reactor (VHTR) studies. The primary use of the VHTR is to provide heat for various industrial processes, such as hydrocarbon reforming and coal gasification. For many processes the use of an intermediate heat transfer barrier between the reactor coolant and the process is desirable; for some processes it is mandatory. Various intermediate heat exchanger (IHX) concepts for the VHTR were investigated with respect to safety, cost, and engineering design considerations. The reference processes chosen were steam-hydrocarbon reforming, with emphasis on the chemical heat pipe, and steam gasification of coal. The study investigates the critically important area of heat transfer between the reactor coolant, helium, and the various chemical processes

  11. Advanced Turbine Systems (ATS) program conceptual design and product development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-31

    Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

  12. [Design of an HACCP program for a cocoa processing facility].

    Science.gov (United States)

    López D'Sola, Patrizia; Sandia, María Gabriela; Bou Rached, Lizet; Hernández Serrano, Pilar

    2012-12-01

    The HACCP plan is a food safety management tool used to control physical, chemical and biological hazards associated to food processing through all the processing chain. The aim of this work is to design a HACCP Plan for a Venezuelan cocoa processing facility.The production of safe food products requires that the HACCP system be built upon a solid foundation of prerequisite programs such as Good Manufacturing Practices (GMP) and Sanitation Standard Operating Procedures (SSOP). The existence and effectiveness of these prerequisite programs were previously assessed.Good Agriculture Practices (GAP) audit to cocoa nibs suppliers were performed. To develop the HACCP plan, the five preliminary tasks and the seven HACCP principles were accomplished according to Codex Alimentarius procedures. Three Critical Control Points (CCP) were identified using a decision tree: winnowing (control of ochratoxin A), roasting (Salmonella control) and metallic particles detection. For each CCP, Critical limits were established, the Monitoring procedures, Corrective actions, Procedures for Verification and Documentation concerning all procedures and records appropriate to these principles and their application was established. To implement and maintain a HACCP plan for this processing plant is suggested. Recently OchratoxinA (OTA) has been related to cocoa beans. Although the shell separation from the nib has been reported as an effective measure to control this chemical hazard, ochratoxin prevalence study in cocoa beans produced in the country is recommended, and validate the winnowing step as well

  13. Exercise program design considerations for head and neck cancer survivors.

    Science.gov (United States)

    Midgley, Adrian W; Lowe, Derek; Levy, Andrew R; Mepani, Vishal; Rogers, Simon N

    2018-01-01

    The present study aimed to establish exercise preferences, barriers, and perceived benefits among head and neck cancer survivors, as well as their level of interest in participating in an exercise program. Patients treated for primary squamous cell carcinoma of the head and neck between 2010 and 2014 were identified from the hospital database and sent a postal questionnaire pack to establish exercise preferences, barriers, perceived benefits, current physical activity levels, and quality of life. A postal reminder was sent to non-responders 4 weeks later. The survey comprised 1021 eligible patients of which 437 (43%) responded [74% male, median (interquartile range) age, 66 (60-73) years]. Of the respondents, 30% said 'Yes' they would be interested in participating in an exercise program and 34% said 'Maybe'. The most common exercise preferences were a frequency of three times per week, moderate-intensity, and 15-29 min per bout. The most popular exercise types were walking (68%), flexibility exercises (35%), water activites/swimming (33%), cycling (31%), and weight machines (19%). Home (55%), outdoors (46%) and health club/gym (33%) were the most common preferred choices for where to regularly exercise. Percieved exercise benefits relating to improved physical attributes were commonly cited, whereas potential social and work-related benefits were less well-acknowledged. The most commonly cited exercise barriers were dry mouth or throat (40%), fatigue (37%), shortness of breath (30%), muscle weakness (28%) difficulty swallowing (25%), and shoulder weakness and pain (24%). The present findings inform the design of exercise programs for head and neck cancer survivors.

  14. Modular Design of NC Program in Multi-varieties and Small-batch Production Mode

    Directory of Open Access Journals (Sweden)

    Liu Hong

    2016-01-01

    Full Text Available Aiming at design efficiency and quality problems of NC program in multi-varieties and small-batch production mode, this paper applied the concept of product modular design into NC program design, and presented the modular design method of NC program and its implementation techniques. By design the module NC program structure and build the database of basic module, provided technical support for the modular design of NC program. The practical application shows those: the constructed module database can be reused and can be combined, using the modular design method can effectively improve the design efficiency and quality of NC program, especially for multi-varieties and small-batch parts, provides an optimal way for NC program to quickly meet the individual demands.

  15. Integrated Task And Data Parallel Programming: Language Design

    Science.gov (United States)

    Grimshaw, Andrew S.; West, Emily A.

    1998-01-01

    his research investigates the combination of task and data parallel language constructs within a single programming language. There are an number of applications that exhibit properties which would be well served by such an integrated language. Examples include global climate models, aircraft design problems, and multidisciplinary design optimization problems. Our approach incorporates data parallel language constructs into an existing, object oriented, task parallel language. The language will support creation and manipulation of parallel classes and objects of both types (task parallel and data parallel). Ultimately, the language will allow data parallel and task parallel classes to be used either as building blocks or managers of parallel objects of either type, thus allowing the development of single and multi-paradigm parallel applications. 1995 Research Accomplishments In February I presented a paper at Frontiers '95 describing the design of the data parallel language subset. During the spring I wrote and defended my dissertation proposal. Since that time I have developed a runtime model for the language subset. I have begun implementing the model and hand-coding simple examples which demonstrate the language subset. I have identified an astrophysical fluid flow application which will validate the data parallel language subset. 1996 Research Agenda Milestones for the coming year include implementing a significant portion of the data parallel language subset over the Legion system. Using simple hand-coded methods, I plan to demonstrate (1) concurrent task and data parallel objects and (2) task parallel objects managing both task and data parallel objects. My next steps will focus on constructing a compiler and implementing the fluid flow application with the language. Concurrently, I will conduct a search for a real-world application exhibiting both task and data parallelism within the same program m. Additional 1995 Activities During the fall I collaborated

  16. Survey of the Goals and Beliefs of Planetarium Professionals regarding Program Design

    Science.gov (United States)

    Small, Kim J.; Plummer, Julia D.

    2010-01-01

    Despite decades of research on the importance of engagement and interaction in learning experiences, programs produced for planetarium audiences are primarily passive in nature. Planetarium professionals were interviewed with regard to their goals and beliefs for planetarium experiences, specifically focusing on goals for children, and their…

  17. Human punishment is not primarily motivated by inequality.

    Science.gov (United States)

    Marczyk, Jesse

    2017-01-01

    Previous theorizing about punishment has suggested that humans desire to punish inequality per se. However, the research supporting such an interpretation contains important methodological confounds. The main objective of the current experiment was to remove those confounds in order to test whether generating inequality per se is punished. Participants were recruited from an online market to take part in a wealth-alteration game with an ostensible second player. The participants were given an option to deduct from the other player's payment as punishment for their behavior during the game. The results suggest that human punishment does not appear to be motivated by inequality per se, as inequality that was generated without inflicting costs on others was not reliably punished. Instead, punishment seems to respond primarily to the infliction of costs, with inequality only becoming relevant as a secondary input for punishment decisions. The theoretical significance of this finding is discussed in the context of its possible adaptive value.

  18. Design and Analysis of Decision Rules via Dynamic Programming

    KAUST Repository

    Amin, Talha M.

    2017-04-24

    The areas of machine learning, data mining, and knowledge representation have many different formats used to represent information. Decision rules, amongst these formats, are the most expressive and easily-understood by humans. In this thesis, we use dynamic programming to design decision rules and analyze them. The use of dynamic programming allows us to work with decision rules in ways that were previously only possible for brute force methods. Our algorithms allow us to describe the set of all rules for a given decision table. Further, we can perform multi-stage optimization by repeatedly reducing this set to only contain rules that are optimal with respect to selected criteria. One way that we apply this study is to generate small systems with short rules by simulating a greedy algorithm for the set cover problem. We also compare maximum path lengths (depth) of deterministic and non-deterministic decision trees (a non-deterministic decision tree is effectively a complete system of decision rules) with regards to Boolean functions. Another area of advancement is the presentation of algorithms for constructing Pareto optimal points for rules and rule systems. This allows us to study the existence of “totally optimal” decision rules (rules that are simultaneously optimal with regards to multiple criteria). We also utilize Pareto optimal points to compare and rate greedy heuristics with regards to two criteria at once. Another application of Pareto optimal points is the study of trade-offs between cost and uncertainty which allows us to find reasonable systems of decision rules that strike a balance between length and accuracy.

  19. DESIGN AND LICENSING TRENDS OF THE GENERAL EDUCATIONAL PROGRAMS IN LATVIA

    OpenAIRE

    Mihailovs, Ivans Jānis; Krūmiņa, Aira Aija

    2016-01-01

    The general education program designing and licensing trends in Latvia in the period from 2010 to 2014 are analyzed in the article. Based on the general education program licensing data, it found that there isn’t a trend to license author’s program in primary education, while the secondary level of education author's programs are designed and licensed more often. The fact that primary education is more licensed programs in mathematics, science and technology, but in general secondary educatio...

  20. Designing Programs that Foster Sustained Interest in STEM

    Science.gov (United States)

    Cuff, K. E.; Diaz, J. L.; Marks-Block, T. A.

    2008-12-01

    Current and possible future shortages of science, technology, engineering and mathematics (STEM) professionals in the US are again becoming hot topics of discussion amongst policy makers and educators alike. In an innovative approach to addressing these concerns, Tai et al. (2006) analyzed a large set of longitudinal study data to gain a deeper understanding of the impact of early STEM experiences on career choices. The results of their work indicate a statistically significant relationship between early expressed interest in STEM and inclination to enter STEM-related career paths. While this relationship is one that has resided at the core of most STEM educators' work for many years, the quantitative evidence provided by Tai et al. underscores the need to pay closer attention to students' STEM interest levels, particularly during periods when such interest is in jeopardy of becoming eroded. Recent work at UC Berkeley's Lawrence Hall of Science related to the development of STEM education models tailored to specifically meet the needs of students in disadvantaged Bay Area communities has resulted in the creation of the East Bay Academy for Young Scientists (EBAYS). EBAYS has been designed to stimulate and sustain interest in STEM by engaging participants in a combination of community-based environmental science research and hands-on content learning activities presented in after school and summer program settings. Given that its programming occurs in an environment where time and academic content constraints are not critical factors, EBAYS is able to provide opportunities for participants to experience STEM in a highly interactive, in-depth manner that differs significantly from the more depersonalized approaches commonly associated with more traditional educational settings. Founded on the research-based premise that when young people are engaged in learning activities that they perceive as relevant, they are more likely to take more initiative, remain attentive

  1. Designing Abstractions for JavaScript Program Analysis

    DEFF Research Database (Denmark)

    Andreasen, Esben Sparre

    JavaScript is a widely used dynamic programming language. What started out as a client-side scripting language for browsers, is now used for large applications in many different settings. As for other dynamic languages, JavaScript makes it easy to write programs quickly without being constrained...... by the language, and programmers exploit that power to write highly dynamic programs. Automated tools for helping programmers and optimizing programs are used successfully for many programming languages. Unfortunately, the automated tools for JavaScript are not as good as for other programming languages....... The program analyses, that the automated tools are built upon, are poorly suited to deal with the highly dynamic nature of JavaScript programs. The lack of language restrictions on the programmer are detrimental to the quality of program analyses for JavaScript. The aim of this dissertation is to address...

  2. Radwaste assessment program for nuclear station modifications by design engineering

    International Nuclear Information System (INIS)

    Eble, R.G.

    1988-01-01

    Radwaste burial for Duke Power Company's (DPC's) seven nuclear units has become a complicated and costly process. Burial costs are based on overall volume, surcharges for radioactivity content and weight of containers, truck and cask rental, driver fees, and state fees and taxes. Frequently, radwaste costs can be as high as $500 per drum. Additionally, DPC is limited on the total burial space allocated for each plant each year. The thrust of this program is to reduce radwaste volumes needing burial at either Barnwell, South Carolina, or Richland, Washington. A limited number of options are available at our sites: (a) minimization of radwaste volume production, (b) segregation of contamination and noncontaminated trash, (c) decontamination of small hardware, (d) volume reduction of compatible trash, (e) incineration of combustible trash (available at Oconee in near future), and (f) burial of below-regulatory-concern very low level waste on site. Frequently, costs can be reduced by contracting services outside the company, i.e., supercompaction, decontamination, etc. Information about radwaste volumes, activities, and weight, however, must be provided to the nuclear production department (NPD) radwaste group early in the nuclear station modification (NSM) process to determine the most cost-effective method of processing radwaste. In addition, NSM radwaste costs are needed for the NPD NSM project budget. Due to the advanced planning scope of this budget, NSM construction costs must be estimated during the design-phase proposal

  3. Mentoring program design and implementation in new medical schools

    Science.gov (United States)

    Fornari, Alice; Murray, Thomas S.; Menzin, Andrew W.; Woo, Vivian A.; Clifton, Maurice; Lombardi, Marion; Shelov, Steven

    2014-01-01

    Purpose Mentoring is considered a valuable component of undergraduate medical education with a variety of programs at established medical schools. This study presents how new medical schools have set up mentoring programs as they have developed their curricula. Methods Administrators from 14 US medical schools established since 2006 were surveyed regarding the structure and implementation of their mentoring programs. Results The majority of new medical schools had mentoring programs that varied in structure and implementation. Although the programs were viewed as valuable at each institution, challenges when creating and implementing mentoring programs in new medical schools included time constraints for faculty and students, and lack of financial and professional incentives for faculty. Conclusions Similar to established medical schools, there was little uniformity among mentoring programs at new medical schools, likely reflecting differences in curriculum and program goals. Outcome measures are needed to determine whether a best practice for mentoring can be established. PMID:24962112

  4. Computer programs: Mechanical and structural design criteria: A compilation

    Science.gov (United States)

    1973-01-01

    Computerized design criteria for turbomachinery and the constraints imposed by very high rotational fields are presented along with a variety of computerized design criteria of interest to structural designers.

  5. Mechanistic flexible pavement overlay design program : tech summary.

    Science.gov (United States)

    2009-07-01

    The Louisiana Department of Transportation and Development (LADOTD) currently follows the 1993 : AASHTO pavement design guides component analysis method in its fl exible pavement overlay thickness : design. Such an overlay design method, how...

  6. DESIGNING GREEN SUPPORT: INCENTIVE COMPATIBILITY AND THE COMMODITY PROGRAMS

    OpenAIRE

    Runge, C. Ford

    1994-01-01

    The purpose of this brief analysis is to consider the potential points of contact between a program of "green support" and the existing commodity programs in U.S. agriculture. These points of contact may take the form of conflict, complementarity, or neutrality. We shall assume initially that green support is "added" to the programs as they exist in 1994. Five main commodity program areas are considered: A. Deficiency payments resulting from the loan rate/target price structure B. Acreage red...

  7. DBADOSE: a PC program for stack design and the PRR-1 design basis accident

    International Nuclear Information System (INIS)

    Leopando, L.S.

    1994-01-01

    DBA D OSE is a program written to be used as a tool to verify the adequacy of the design of the stack of the Philippine Research Reactor-1 (PRR-1) under design basis accident conditions. DBA D OSE runs on IBM-compatible personal computers. In the design basis accident, a substantial amount of fission products is released into the air inside the reactor building. The emergency ventilation system is assumed to function, creating a negative air pressure inside the building that will prevent the uncontrolled release of fission products into the atmosphere. The emergency ventilation system will drive filtered building air through a stack to create the negative pressure. Unavoidably, some of the fission products will pass through the filter and will be discharged. The fission products will be carried by the wind beyond the reactor site and will cause some exposure of the public to radiation. DBA D OSE may be used to calculate the amounts of exposure dose for various stack configurations and meteorological conditions at given distances from the reactor. The exposure doses may be compared with acceptable limits. The source code of DBA D OSE contains approximately 3000 lines of FORTRAN-77 (written for the Microsoft Fortran 4.10 compiler) and 300 lines of assembler. DBA D OSE.EXE is only 58 kB in size and needs only about 71 kB of RAM to run. A math-coprocessor is not needed but will speed up runs considerably. (author). 8 refs., 8 tabs

  8. Examining the Role of Multicultural Competence in Leadership Program Design

    Science.gov (United States)

    Wilson, Amy B.

    2015-01-01

    Research examining the multicultural competence of leadership educators across a variety of institutions demonstrated variance based on leadership program structure, program elements, and the ways in which diversity was addressed in the program. The Multicultural Competence in Student Affairs-Preliminary 2 (MCSA-P2) scale was used to measure…

  9. Designing and Evaluating Library Leadership Programs: Improving Performance and Effectiveness

    Science.gov (United States)

    Romaniuk, Mary-Jo; Haycock, Ken

    2011-01-01

    It has become accepted wisdom that there is a shortage of leaders in the library profession. A number of leader and leadership development programs have emerged in Australia, Canada and the United States that attract interested participants, yet what is the core purpose of these programs? Do they work? Review of leadership programs reveals that…

  10. Designing Programs for New Teachers: The California Experience.

    Science.gov (United States)

    Morey, Ann I., Ed.; Murphy, Diane S., Ed.

    Nine articles by California educators are included in this guidebook for the planning and implementation of beginning teacher support programs, with a focus on improving teacher quality and retention. An explicit relationship between the conceptual framework and the operational program increases the effectiveness of such programs. Chapters titles…

  11. Designing Aquatic Exercise Programs--Three Guiding Principles.

    Science.gov (United States)

    White, Sue W.; Landis, Larry M.

    1989-01-01

    Three guiding principles provide the planner of aquatic exercise programs with a model that helps to ensure an effective program: principles of resource availability and allocation; the principle of fit, which involves matching instructor leadership style with program objectives; and the principle of attitude and perception modification. (IAH)

  12. A case of Choriocarcinoma primarily located in the urinary bladder

    Directory of Open Access Journals (Sweden)

    Gül Türkcü

    2015-12-01

    Full Text Available Choriocarcinoma is a tumor with poor prognosis which usually develops in the uterus and ovaries in females and testes in males. Choriocarcinomas primarily located in the urinary bladder occur extremely rare. In the radiological examination of the 28 year old male patient presented with cough, difficulty in breathing, dysuria and hematuria; lung lesions compatible with metastasis and a mass which was extending inside of the lumen in the anterior wall of the urinary bladder were determined. During the cystoscopic investigation, an incomplete transurethral resection was applied to the tumor. In the histopathological evaluation of the tumor tissue, cells compatible with syncytiotrophoblasts were observed among the polyhedral large mononuclear cells. While positive staining with pancytokeratin, cytokeratin 7, high molecular weight cytokeratin, human plasental lactogen, and human corionic gonadotrophin was observed in the tumor tissue, there was not any staining with epithelial membrane antigen, carcinoembryonic antigen, CD30, p63, and cytokeratin 20. Present histopathological and immunohistochemical findings were evaluated as compatible with coriocarcinoma. Because of being seen rarely, having poor prognosis, causing death due to metastasis, the necessity of holding in mind in the differential diagnosis of high grade urothelial carcinomas, it is purposed to present the case accompanied by literature information.

  13. Urban Tree Risk Management:A Community Guide to Program Design and Implementation

    Science.gov (United States)

    Jill Pokorny; Joseph O' Brien; Richard Hauer; Gary Johnson; Jana Albers; Peter Bedker; Manfred Mielke

    2003-01-01

    Urban Tree Risk Management: A Community Guide to Program Design and Implementation is a fully illustrated, easy to read training manual written for community leaders, administrators, city foresters, parks and public works staff, and private tree care practitioners. The manual is designed to assist communities design, adopt and implement tree risk management programs,...

  14. A Design Study of a Multimedia Instructional Grammar Program with Embedded Tracking

    Science.gov (United States)

    Koehler, Natalya A.; Thompson, Ann D.; Phye, Gary D.

    2011-01-01

    This is a design study meant to demonstrate the feasibility of integrating three rather different theoretical perspectives for future efforts in multimedia instructional design. A multimedia instructional grammar program contextualized within the teaching of English as a Second Language (ESL) was developed and evaluated. The program design was…

  15. Contribution of the VISTA ITL program for the standard design approval of the SMART design

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun Sik; Chung, Young Jong; Joo, Hyung Kook; Lee, Won Jae; Kim, Hark Rho; Song, Chul Hwa; Yi, Sung Jae [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    A small scale integral effect test (IET) program had been performed by the Korea Atomic Energy Research Institute (KAERI) using the VISTA integral test loop (VISTA ITL). It has the simulation capability of small break loss of coolant accident (SBLOCA), complete loss of reactor coolant system (RCS) flow (CLOF) and passive residual heat removal system (PRHRS) performance for the SMART design. The reference plant of the VISTA ITL is a 330 MWth integral pressurized water reactor (iPWR), SMART, which was developed by KAERI. Its standard design had been approved by Korean regulatory authority on July 2012. The SMART reactor is characterized by the introduction of simplified and improved safety systems such as passive residual heat removal system (PRHRS) and its integral arrangement of the reactor vessel assembly. Integral reactor design eliminates the large size pipe connections between major components. Thus, it excludes the occurrence of a large break loss of coolant accident (LBLOCA), and a SBLOCA is one of major concerns for safety analysis. Therefore, the VISTA ITL was used to investigate various thermal hydraulic phenomena during the SBLOCA. The break flow rate, safety injection flow rate, and thermal hydraulic behaviors of major components were measured for a typical break size and break locations. The acquired data was used to validate related thermal hydraulic models of the safety analysis code, TASS/SMR S which is used to validate the safety of the SMART in coping with the SBLOCA scenarios. A set of tests for SBLOCAs, CLOF and PRHRS performance was performed to understand the general behavior and to assess its safety of the SMART design using the VISTA ITL facility. The test results were used to validate the TASS/SMR S code. This paper also introduces regulatory issues concerning the VISTA ITL tests and how they were resolved. The scoping analysis was performed in resolving regulatory issues using a best estimate system analysis code, MARS KS developed by KAERI.

  16. Comprehensive Guidance Program Design. Highlights: An ERIC/CAPS Fact Sheet.

    Science.gov (United States)

    Collet, Jeanne Bleuer

    This fact sheet presents an overview of problems in designing comprehensive guidance programs and a rationale for a new direction. Five guidelines for a new comprehensive program are discussed: (1) build on existing program; (2) use teamwork approach; (3) identify desired student outcomes; (4) plan program activities related to outcomes; and (5)…

  17. Design of training programs for a positive youth development program: Project P.A.T.H.S. in Hong Kong.

    Science.gov (United States)

    Shek, Daniel T L; Chak, Yammy L Y

    2010-01-01

    To facilitate the implementation of the Secondary 1 to Secondary 3 program of the Project P.A.T.H.S. in Hong Kong, systematic training programs are designed for the potential program implementers. The rationales, objectives and design of the Secondary 1 to Secondary 3 training programs are outlined in this paper. The training programs cover theories of adolescent development, positive youth development, background and curricula of the Project P.A.T.H.S., factors affecting program implementation quality and evaluation of the project. Besides introducing the curriculum units, the training programs also focus on nature of learning and related theories (particularly experiential learning), teaching methods and instructional techniques, motivating students, and classroom management.

  18. Commercial Midstream Energy Efficiency Incentive Programs: Guidelines for Future Program Design, Implementation, and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Milostan, Catharina [Argonne National Lab. (ANL), Argonne, IL (United States); Levin, Todd [Argonne National Lab. (ANL), Argonne, IL (United States); Muehleisen, Ralph T. [Argonne National Lab. (ANL), Argonne, IL (United States); Guzowski, Leah Bellah B. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    Many electric utilities operate energy efficiency incentive programs that encourage increased dissemination and use of energy-efficient (EE) products in their service territories. The programs can be segmented into three broad categories—downstream incentive programs target product end users, midstream programs target product distributors, and upstream programs target product manufacturers. Traditional downstream programs have had difficulty engaging Small Business/Small Portfolio (SBSP) audiences, and an opportunity exists to expand Commercial Midstream Incentive Programs (CMIPs) to reach this market segment instead.

  19. Banning artwork program user's manual. [for computerized design of gates (circuits)

    Science.gov (United States)

    Taylor, J. F.

    1976-01-01

    A manual containing computer programs for designing circuits is presented. A description of the pattern library, the plotter used to draw the circuit patterns, and program control cards is given. Sample printouts and cards are shown.

  20. Computer program optimizes design of nuclear radiation shields

    Science.gov (United States)

    Lahti, G. P.

    1971-01-01

    Computer program, OPEX 2, determines minimum weight, volume, or cost for shields. Program incorporates improved coding, simplified data input, spherical geometry, and an expanded output. Method is capable of altering dose-thickness relationship when a shield layer has been removed.

  1. Using Research to Design Integrated Education and Training Programs

    Science.gov (United States)

    Pappalardo, Michele; Schaffer, William R.

    2016-01-01

    With the passage of the Workforce Innovation and Opportunity Act (WIOA) of 2014, Northampton Community College began the creation of Integrated Education and Training (IE&T) programs in October 2015. After a needs assessment was conducted with the partners, programs were created to address the needs in the hospitality and healthcare sectors.…

  2. Development of a Computer Program for the Design of Auger ...

    African Journals Online (AJOL)

    A computer program was developed for the above processes to remove the constraints of the classical approach. The program which is iterative and menu driven, accepts relevant input data (material to be conveyed, required capacity, elevations involved, etc) and does the required calculations, selection and optimization.

  3. Student Attitudes toward Information Systems Graduate Program Design and Delivery

    Science.gov (United States)

    Thouin, Mark F.; Hefley, William E.; Raghunathan, Srinivasan

    2018-01-01

    This study examines student preferences regarding graduate management information systems (MIS) education. One hundred and eighty four graduate students responded to a survey exploring student attitudes towards degree program content, delivery format, and peer group interaction. Study results indicate that students prefer a program with an even…

  4. User-Centered Design of GPU-Based Shader Programs

    DEFF Research Database (Denmark)

    Kraus, Martin

    2012-01-01

    In the context of game engines with graphical user interfaces, shader programs for GPUs (graphics processing units) are an asset for game development that is often used by artists and game developers without knowledge of shader programming. Thus, it is important that non-programmers are enabled t...

  5. Innovative Medium-Speed Drivetrain Design Program and Dynamometer Testing; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan; Halse, Christopher

    2015-05-19

    Presented at the American Wind Energy Association WINDPOWER 2015 conference. This presentation covers the concept of the next-generation drivetrain, including its impacts, innovations, design and design benefits, instrumentation, assembly, and testing programs.

  6. Cultural Influences on the Design and Management of Transnational Higher Education Programs in China: A Case Study of Three Programs

    Science.gov (United States)

    He, Lan; Liu, Ersi

    2018-01-01

    Purpose: The purpose of this paper is to identify the influence of cultural differences on the design and management of two franchise programs and one joint degree program run by a Chinese university in partnership with a British university and a French university. The cross-cultural challenges and the differences in the strategies taken by the…

  7. Corporate social marketing: message design to recruit program participants.

    Science.gov (United States)

    Black, David R; Blue, Carolyn L; Coster, Daniel C; Chrysler, Lisa M

    2002-01-01

    To identify variables for a corporate social marketing (SM) health message based on the 4 Ps of SM in order to recruit future participants to an existing national, commercial, self-administered weight-loss program. A systematically evaluated, author-developed, 310-response survey was administered to a random sample of 270 respondents. A previously established research plan was used to empirically identify the audience segments and the "marketing mix" appropriate for the total sample and each segment. Tangible product, pertaining to the unique program features, should be emphasized rather than positive core product and outcome expectation related to use of the program.

  8. Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

    CERN Document Server

    Leach, Ronald

    2014-01-01

    Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

  9. Design and Development of a Program for Attitude Change

    Science.gov (United States)

    Thiagarajan, S.

    1969-01-01

    Describes a program intended to assist family-planning workers in Indai overcome their reluctance to use "dirty words when teaching illiterate villagers contraceptive techniques. Project supported by Health and Family Planning Division of the USAID, New Delhi, India. (LS)

  10. Opportunities for Russian Nuclear Weapons Institute developing computer-aided design programs for pharmaceutical drug discovery. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-23

    The goal of this study is to determine whether physicists at the Russian Nuclear Weapons Institute can profitably service the need for computer aided drug design (CADD) programs. The Russian physicists` primary competitive advantage is their ability to write particularly efficient code able to work with limited computing power; a history of working with very large, complex modeling systems; an extensive knowledge of physics and mathematics, and price competitiveness. Their primary competitive disadvantage is their lack of biology, and cultural and geographic issues. The first phase of the study focused on defining the competitive landscape, primarily through interviews with and literature searches on the key providers of CADD software. The second phase focused on users of CADD technology to determine deficiencies in the current product offerings, to understand what product they most desired, and to define the potential demand for such a product.

  11. Design of incentive programs for accelerating penetration of energy-efficient appliances

    International Nuclear Information System (INIS)

    Rue du Can de la, Stephane; Leventis, Greg; Phadke, Amol; Gopal, Anand

    2014-01-01

    Incentives are policy tools that sway purchase, retail stocking, and production decisions toward energy-efficient products. Incentives complement mandatory standards and labeling policies by accelerating market penetration of products that are more energy efficient than required by existing standards and by preparing the market for more stringent future mandatory requirements. Incentives can be directed at different points in the appliance's supply chain; one point may be more effective than another depending on the technology's maturity and market penetration. This paper seeks to inform future policy and program design by categorizing the main elements of incentive programs from around the world. We identify advantages and disadvantages of program designs through a qualitative overview of incentive programs worldwide. We find that financial incentive programs have greater impact when they target highly efficient technologies with a small market share, and that program designs depend on the market barriers addressed, the target equipment, and the local market context. No program design is inherently superior to another. The key to successful program design and implementation is a thorough understanding of the market and identification of the most important local obstacles to the penetration of energy-efficient technologies. - Highlights: • We researched incentive programs design and implementation worldwide. • This paper seeks to inform future policy and program design. • We identify design and identify advantages and disadvantages. • We find that incentive programs have greater impact when they target highly efficient products. • Program designs depend on the market barriers addressed and the local market context

  12. IPAD applications to the design, analysis, and/or machining of aerospace structures. [Integrated Program for Aerospace-vehicle Design

    Science.gov (United States)

    Blackburn, C. L.; Dovi, A. R.; Kurtze, W. L.; Storaasli, O. O.

    1981-01-01

    A computer software system for the processing and integration of engineering data and programs, called IPAD (Integrated Programs for Aerospace-Vehicle Design), is described. The ability of the system to relieve the engineer of the mundane task of input data preparation is demonstrated by the application of a prototype system to the design, analysis, and/or machining of three simple structures. Future work to further enhance the system's automated data handling and ability to handle larger and more varied design problems are also presented.

  13. Integrated Research/Education University Aircraft Design Program Development

    Science.gov (United States)

    2017-04-06

    optimization that would account for all design criteria, constraints, and objectives. New contributions to tailless or minimal-tail supersonic long-range...time. Direct digital design, by contrast, begins with accounting for the effects of sampling and computation in the synthesis procedure...function for the infinite horizon LQR problem is shown below. = 1 2 � ( + ) ∞ 0 DISTRIBUTION A

  14. Development of structure design program for venturi scrubber working at self-priming mode

    International Nuclear Information System (INIS)

    Wang Meng; Sun Zhongning; Gu Haifeng

    2012-01-01

    A structure design program was developed for Venturi scrubber working at the self-priming mode. This program proposed a complete logic for thermal parameters calculation and structure design of the throat. A revised calculation for resistance relationship was carried out based on experimental study. The relative error between revised results and experimental values is within 8.6%. (authors)

  15. Peer Mentor Program for the General Chemistry Laboratory Designed to Improve Undergraduate STEM Retention

    Science.gov (United States)

    Damkaci, Fehmi; Braun, Timothy F.; Gublo, Kristin

    2017-01-01

    We describe the design and implementation of an undergraduate peer mentor program that can overlay an existing general chemistry laboratory and is designed to improve STEM student retention. For the first four freshman cohorts going through the program, year-to-year retention improved by a four-year average of 20% for students in peer-mentored…

  16. Chasing Innovation: A Pilot Case Study of a Rhizomatic Design Thinking Education Program

    Science.gov (United States)

    Biffi, Alfredo; Bissola, Rita; Imperatori, Barbara

    2017-01-01

    Purpose: The purpose of this paper is to illustrate and discuss the main features and key challenges of an original post-graduate education program designed according to an innovative theoretical framework promoting design thinking in a rhizomatic approach. By involving different stakeholders, the aim of this entrepreneurship education program is…

  17. Partnerships and Learning Communities in Work-Integrated Learning: Designing a Community Services Student Placement Program

    Science.gov (United States)

    Harris, Lisa; Jones, Martyn; Coutts, Sally

    2010-01-01

    The paper describes and analyses the design and implementation of a higher education student placement program in the community services sector. Principally ideas about partnerships and social learning informed the design. The placement program represents a significant innovation in work-integrated learning, achieved through collaboration between…

  18. The Effects of a Custom-Designed Animation Program on Learning Chinese Characters

    Science.gov (United States)

    Shi, Lin

    2012-01-01

    The purpose of this study is to evaluate the effects of a custom-designed computer animation program on learning Chinese characters by beginning learners of Chinese as Foreign Language (CFL) in a higher education setting. This study used a matched comparison quasi-experimental design to explore the effects of the customized computer program within…

  19. [Intervention programs in hospital nutrition: actions, design, components and implementation].

    Science.gov (United States)

    Santana Porben, S; Barreto Penié, J

    2005-01-01

    Metabolic, Nutrient and Feeding Intervention Programs must become the methodological tool for dealing with the health problem posed by disease-associated-malnutrition on one side, and the "Bad Practices" affecting the nutritional status of the patient, on the other one. Programs like these ones should prescribe clear policies and actions in the three domains of contemporary medical practice: assistance, research and education. The fullfillment of these Program's objectives, and the relization of the implicit benefits, will only be possible if a methodological platform that armonically integrates elements of Continuous Education, Cost Analysis, Recording and Documentation, and Quality Control and Assurance, is created. The experience acumulated after the inception and conduction of the Intervention Program at the Clinical-Surgical "Hermanos Ameijeiras" Hospital (Havana City, Cuba) has served to demostrate that it is feasible not only to create a theoretical and practical body to satisfy the aforementioned goals, but, also, to export it to another institutions of the country, in view of the fact that minimal investments for adquiring the resources needed to deploy such Program, as well as for training and capacitation of medic and paramedic personel in the corresponding Recording & Documentation and Feeding & Nutrition Good Practices might result in short-term economical and medical care benefits.

  20. 24 CFR 570.421 - New York Small Cities Program design.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false New York Small Cities Program... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES COMMUNITY DEVELOPMENT BLOCK GRANTS Small Cities, Non-Entitlement CDBG Grants in Hawaii and Insular Areas Programs § 570.421 New York Small Cities Program design...

  1. Designing chemical soil characterization programs for mixed waste sites

    International Nuclear Information System (INIS)

    Meyers, K.A. Jr.

    1989-01-01

    The Weldon Spring Site Remedial Action Project is a remedial action effort funded by the U.S. Department of Energy. The Weldon Spring Site, a former uranium processing facility, is located in east-central Missouri on a portion of a former ordnance works facility which produced trinitrotoluene during World War II. As a result of both uranium and ordnance production, the soils have become both radiologically and chemically contaminated. As a part of site characterization efforts in support of the environmental documentation process, a chemical soil characterization program was developed. This program consisted of biased and unbiased sampling program which maximized areal coverage, provided a statistically sound data base and maintained cost effectiveness. This paper discusses how the general rationale and processes used at the Weldon Spring Site can be applied to other mixed and hazardous waste sites

  2. A Learning Model Design Integrating ESP Course and Service Learning Program to Promote Relevance and Meaningfulness

    Directory of Open Access Journals (Sweden)

    Carla Sih Prabandari

    2017-01-01

    Full Text Available Relevance and meaningfulness of the content courses need to be established to make learners realize that the knowledge acquired in the clasroom can be utilized to give contributions to society. This research is aimed at designing a learning model integrating ESP course and Service Learning Program. ESP is a subject designed to enable students to design ESP programs. The integration of ESP and SLP allows students to exercise their skills in designing an ESP program, which is eventually implemented as one of their SLP programs. The current research is targeted to describe what the learning model design integrating ESP Course and Service Learning Program looks like.   DOI: https://doi.org/10.24071/llt.2016.1902O2

  3. Do Loyalty Programs Enhance Behavioral Loyalty : An Empirical Analysis Accounting for Program Design and Competitive Effects

    NARCIS (Netherlands)

    Leenheer, J.; Bijmolt, T.H.A.; van Heerde, H.J.; Smidts, A.

    2002-01-01

    This paper studies the effects of loyalty programs on share-of-wallet using market-wide household panel data on supermarket purchases.We find that loyalty programs relate positively to share-of-wallet, but the programs differ in effectiveness and some are ineffective.Both a saving component and a

  4. IPAD: Integrated Programs for Aerospace-vehicle Design

    Science.gov (United States)

    Miller, R. E., Jr.

    1985-01-01

    Early work was performed to apply data base technology in support of the management of engineering data in the design and manufacturing environments. The principal objective of the IPAD project is to develop a computer software system for use in the design of aerospace vehicles. Two prototype systems are created for this purpose. Relational Information Manager (RIM) is a successful commercial product. The IPAD Information Processor (IPIP), a much more sophisticated system, is still under development.

  5. Grant programs : design features shape flexibility, accountability, and performance information

    Science.gov (United States)

    1998-06-01

    Flexible grants--block grants and similar programs that give state or local governments the flexibility to adapt funded activities to fit the state or local context--are an adaptable policy tool and are found in fields from urban transit to community...

  6. Computer program simplifies design of rotating components of turbomachinery

    Science.gov (United States)

    Lefevre, J. C.

    1967-01-01

    Digital computer program performs stress analysis and burst speed calculations on rotating axisymmetric turbomachinery components. The computer printout contains the displacement of each nodal point, the stress at the center of each element, the average tangential stress within the component, and the burst speed.

  7. Designing Educational Games for Computer Programming: A Holistic Framework

    Science.gov (United States)

    Malliarakis, Christos; Satratzemi, Maya; Xinogalos, Stelios

    2014-01-01

    Computer science is continuously evolving during the past decades. This has also brought forth new knowledge that should be incorporated and new learning strategies must be adopted for the successful teaching of all sub-domains. For example, computer programming is a vital knowledge area within computer science with constantly changing curriculum…

  8. Design and fabrication of an automated temperature programmed ...

    Indian Academy of Sciences (India)

    A completely automated temperature-programmed reaction (TPR) system for carrying out gas-solid catalytic reactions under atmospheric flow conditions is fabricated to study CO and hydrocarbon oxidation, and NO reduction. The system consists of an all-stainless steel UHV system, quadrupole mass spectrometer SX200 ...

  9. Design and fabrication of an automated temperature programmed ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A completely automated temperature-programmed reaction (TPR) system for carrying out gas–solid catalytic reactions under atmospheric flow conditions is fabricated to study CO and hydrocarbon oxidation, and NO reduction. The system consists of an all-stainless steel UHV system, quadrupole mass.

  10. Design Guidelines for Graduate Program Social Media Use

    Science.gov (United States)

    Rosenberg, Joshua M.; Terry, Colin A.; Bell, John; Hiltz, Virginia; Russo, Tracy E.

    2016-01-01

    Social media provides a promising platform for members of informal and formal educational communities to build community, collaborate, and support institutional goals such as student recruitment. Despite burgeoning research on the educational uses of social media, we are not aware of any to guide graduate program social media use. In order to…

  11. Designing a New Program in Family Relations and Applied Nutrition

    Science.gov (United States)

    Devine, Sharon Mayne; Daly, Kerry; Lero, Donna; MacMartin, Clare

    2007-01-01

    Family Relations and Applied Nutrition, which is offered at the University of Guelph, is an interdisciplinary department that previously offered three undergraduate majors: child, youth, and family; applied human nutrition; and gerontology; as well as graduate programs at the master's and doctoral levels. Several factors have precipitated a review…

  12. Operations Management in the Design and Execution of MBA Programs

    Science.gov (United States)

    Busing, Michael E.; Palocsay, Susan W.

    2016-01-01

    Master of business administration (MBA) programs are under intense pressure to improve efficiencies, lower tuition, and offer refreshed curriculum that is of high quality and regarded as relevant by the marketplace. In light of this environment, the authors propose a conceptual framework for effectively employing operations management (OM)…

  13. Advancing Care Within an Adult Mental Health Day Hospital: Program Re-Design and Evaluation.

    Science.gov (United States)

    Taube-Schiff, Marlene; Mehak, Adrienne; Marangos, Sandy; Kalim, Anastasia; Ungar, Thomas

    2017-11-13

    Day hospital mental health programs provide alternate care to individuals of high acuity that do not require an inpatient psychiatric stay. Ensuring provision of best practice within these programs is essential for patient stabilization and recovery. However, there is scant literature to review when creating such a program. This paper provides an overview of the steps an acute care hospital took when designing and implementing new programming within a day hospital program. Qualitative data was collected following initial program rollout. This data helped to inform the ongoing modification of groups offered, group scheduling and content, as well as ensuring patient satisfaction and adequate skill delivery during the rollout period and beyond. The goal of this paper is to inform health service delivery for other programs when attempting to build or re-design a day hospital program.

  14. Indigenous health: designing a clinical orientation program valued by learners.

    Science.gov (United States)

    Huria, Tania; Palmer, Suetonia; Beckert, Lutz; Lacey, Cameron; Pitama, Suzanne

    2017-10-05

    Indigenous health programs are seen as a curriculum response to addressing health disparities and social accountability. Several interrelated teaching approaches to cultural competency curricula have been recommended, however evidence of the impact of these on learner outcomes including engagement and self-reported competencies is limited. We aimed to explore undergraduate medical student perspectives of an indigenous health orientation program to inform curriculum strategies that promote learning and development of clinical skills. We analyzed quantitative and qualitative student evaluations (n = 602) of a three-day immersed indigenous health orientation program between 2006 and 2014 based on Likert-scale responses and open-text comments. We conducted a thematic analysis of narrative student experiences (n = 426). Overall, 509 of 551 respondents (92%) rated the indigenous health orientation program as extremely or highly valuable and most (87%) reported that the course strongly increased their interest in indigenous health. The features of the clinical course that enhanced value for learners included situated learning (learning environment; learning context); teaching qualities (enthusiasm and passion for Māori health; role-modelling); curriculum content (re-presenting Māori history; exploring Māori beliefs, values and practices; using a Māori health framework in clinical practice); teaching methodologies (multiple teaching methods; simulated patient interview); and building relationships with peers (getting to know the student cohort; developing professional working relationships). Undergraduate medical students valued an indigenous health program delivered in an authentic indigenous environment and that explicitly reframed historical notions of indigenous health to contextualize learning. Content relevant to clinical practice, faculty knowledge, and strengthened peer interactions combined to build learner confidence and self-reported indigenous health

  15. Estimation of the Randomized Complete Block Design Parameters with Fuzzy Goal Programming

    OpenAIRE

    Kula, Kamile; Apaydin, Ayşen

    2011-01-01

    Since goal programming was introduced by Charnes, Cooper and Ferguson (1955), goal programming has been widely studied and applied in various areas. Parameter estimation is quite important in many areas. Recently, many researches have been studied in fuzzy estimation. In this study, fuzzy goal programming was proposed by Hannan (1981) adapted to estimation of randomized complete block design parameters. Suggested fuzzy goal programming is used for estimation of randomized complete block desig...

  16. Early Site Permit Demonstration Program: Station design alternatives report

    International Nuclear Information System (INIS)

    1993-03-01

    This report provides the results of investigating the basis for including Station Design Alternatives (SDAs) in the regulatory guidance given for nuclear plant environmental reports (ERs), explains approaches or processes for evaluating SDAs at the early site permit (ESP) stage, and applies one of the processes to each of the ten systems or subsystems considered as SDAS. The key objective o this report s to demonstrate an adequate examination of alternatives can be performed without the extensive development f design data. The report discusses the Composite Suitability Approach and the Established Cutoff Approach in evaluating station design alternatives and selects one of these approaches to evaluate alternatives for each of the plant or station that were considered. Four types of ALWRs have been considered due to the availability of extensive plant data: System 80+, AP600, Advanced Boiling Reactor (ABWR), and Simplified Boiling Water Reactor (SBWR). This report demonstrates the feasibility of evaluating station design alternatives when reactor design detail has not been determined, quantitatively compares the potential ental impacts of alternatives, and focuses the ultimate selection of a alternative on cost and applicant-specific factors. The range of alternatives system is deliberately limited to a reasonable number to demonstrate the or to the three most commonly used at operating plants

  17. LLL's Quality Assurance Program and the design of specific systems: Tritium Handling Facility

    International Nuclear Information System (INIS)

    Dow, J.P.

    1975-01-01

    Lawrence Livermore Laboratory operates a Tritium Handling Facility for several programs. Besides the tritium work for the weapons program, basic research is conducted on all phases of tritium. Additional work is being conducted for the laser fusion program and the controlled thermonuclear program. The Quality Assurance Program for the tritium facility and how it is being implemented on specific tritium handling systems are described. The program is intended to prevent or mitigate the consequences of accidents by rigidly controlling the design, fabrication, procurement, construction and operation of safety-related critical structures, systems, and components of such facilities. (CH)

  18. Negotiating and Designing Public Space. Experiences with a new M.Sc. in Urban Design Program in Hong Kong

    Directory of Open Access Journals (Sweden)

    Hendrik Tieben

    2013-05-01

    Full Text Available This contribution reflects on first experiences made with a newly launched Master of Science in Urban Design program at the Chinese University of Hong Kong. As an important part of this program, students have to develop their design proposal in response to feedback of different stakeholders and community members. Thus the program responds to the growing aspiration of Hong Kong’s citizens to shape the urban development of their city and a lack of a meaningful participation process in the region. With its high density, protected country parks, efficient public transport and large scale housing program, generally, Hong Kong offers important lessons for contemporary urbanism. However, since the end of the British colonial rule and in face of increasing property prices, pollution and the disappearance of local heritage, intensive debates started about the regions future. Another central point of the recent discussion in Hong Kong – and key theme of the new urban design program - is the demand for the rights and qualities of public space. The paper presents the set-up of the design studio, which was closely linked to a course on “urban processes”. During the semester, students had to organize community forums and street exhibitions in a specific district, invite stakeholders and residents and discuss with them their ideas. Their projects, then, had to respond on the various feedbacks and integrate them in their design and policy proposals. The text reflects on the student projects and the lessons learned in the process. It addresses general questions such as the challenges in communicating with a diverse community (e.g. language barriers and culturally different ideas of public space. It addresses the question of the intended and unintended effects of a participatory design studio in the community, and possible follow-ups. And it reflects on the general role of design and designers in shaping community spaces.

  19. Material control and accounting self-test program design

    International Nuclear Information System (INIS)

    Eggers, R.F.; Wilson, R.L.; Byers, K.R.

    1981-01-01

    This paper describes a controversial but potentially beneficial MCandA strategy that has not been widely attempted in the past, called Self-Test. In this strategy a processor of Strategic Special Nuclear Material (SSNM) devises a program of internally administered tests to determine if the MCandA system performs in a reliable, expedient manner in the face of a simulated loss or compromise. Self-Test procedures would include, for example, the actual removal of SSNM from process equipment in order to determine whether the MCandA system will detect the simulated theft. Self-Test programs have several potential problems. However, an approach with the potential for solving many of these problems has been devised and is discussed

  20. Monitoring program design recommendations for uranium mining communities

    International Nuclear Information System (INIS)

    1978-10-01

    Environmental radiological monitoring requirements and their rationale have been developed for operating uranium mine/mill sites including the pre-operational phase, and for non-operating tailings areas, in order to assess the radiological impact on the environment and follow long-term trends. These recommendations have been based on a review of regulatory standards, sources and nature of releases from mines, mills and tailings, and environmental pathway analysis. Media and measurements considered in the routine on-going programs include airborne radon, airborne particulates, external radiation, terrestrial biota, surface water, drinking water, ground water, fish and sediment. Program implementation guides are provided. An overview of sampling and field technique and specific recommendations have been made. (auth)

  1. Integrating design science theory and methods to improve the development and evaluation of health communication programs.

    Science.gov (United States)

    Neuhauser, Linda; Kreps, Gary L

    2014-12-01

    Traditional communication theory and research methods provide valuable guidance about designing and evaluating health communication programs. However, efforts to use health communication programs to educate, motivate, and support people to adopt healthy behaviors often fail to meet the desired goals. One reason for this failure is that health promotion issues are complex, changeable, and highly related to the specific needs and contexts of the intended audiences. It is a daunting challenge to effectively influence health behaviors, particularly culturally learned and reinforced behaviors concerning lifestyle factors related to diet, exercise, and substance (such as alcohol and tobacco) use. Too often, program development and evaluation are not adequately linked to provide rapid feedback to health communication program developers so that important revisions can be made to design the most relevant and personally motivating health communication programs for specific audiences. Design science theory and methods commonly used in engineering, computer science, and other fields can address such program and evaluation weaknesses. Design science researchers study human-created programs using tightly connected build-and-evaluate loops in which they use intensive participatory methods to understand problems and develop solutions concurrently and throughout the duration of the program. Such thinking and strategies are especially relevant to address complex health communication issues. In this article, the authors explore the history, scientific foundation, methods, and applications of design science and its potential to enhance health communication programs and their evaluation.

  2. Quality assurance of analytical, scientific, and design computer programs for nuclear power plants

    International Nuclear Information System (INIS)

    1994-06-01

    This Standard applies to the design and development, modification, documentation, execution, and configuration management of computer programs used to perform analytical, scientific, and design computations during the design and analysis of safety-related nuclear power plant equipment, systems, structures, and components as identified by the owner. 2 figs

  3. A new program for the design of electron microscopes

    Czech Academy of Sciences Publication Activity Database

    Lencová, Bohumila; Zlámal, J.

    2008-01-01

    Roč. 1, č. 1 (2008), s. 315-324 ISSN 1875-3892. [ International Conference on Charged Particle Optics /7./ CPO-7. Cambridge , 24.07.2006-28.07.2006] Institutional research plan: CEZ:AV0Z20650511 Keywords : finite element method * electron lenses and deflectors * computer-aided design * user interface Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  4. Design, development and implementation of a simple program ...

    African Journals Online (AJOL)

    The objective of this work is to design a prototype compiler that would translate the sequences of a symbol written in a chosen language. This compiler would translate the sequences of the source language of the system into the object language of the same system. The work showed the procedure of achieving ...

  5. 49 CFR 238.109 - Training, qualification, and designation program.

    Science.gov (United States)

    2010-10-01

    ... that must be performed on each type of equipment that the railroad operates; (2) Develop written...) Adopt a training curriculum that includes classroom and “hands-on” lessons designed to impart the skills... section. The training curriculum shall specifically address the Federal regulatory requirements contained...

  6. Corporate Governance and the Design of Stock Option Programs

    NARCIS (Netherlands)

    Sautner, Z.; Weber, M.

    2008-01-01

    Investors and academics increasingly criticize that various design features of executive stock option (ESO) plans reflect self-dealing by managers and the inability of corporate governance mechanisms in monitoring executives (managerial power hypothesis). We use a unique and not publicly available

  7. Programming biological operating systems: genome design, assembly and activation.

    Science.gov (United States)

    Gibson, Daniel G

    2014-05-01

    The DNA technologies developed over the past 20 years for reading and writing the genetic code converged when the first synthetic cell was created 4 years ago. An outcome of this work has been an extraordinary set of tools for synthesizing, assembling, engineering and transplanting whole bacterial genomes. Technical progress, options and applications for bacterial genome design, assembly and activation are discussed.

  8. Designing Meaningful Satellite Programs: The Many Faces of Homelessness Project.

    Science.gov (United States)

    Greer, Edrie; Ziebarth, Ann

    1994-01-01

    Design challenges for a videoconference on homelessness included overcoming misconceptions about rural homelessness and ensuring meaningful follow-up. Challenges were met by providing guidelines for site facilitators, conducting preconference activities, including interviews with rural homeless people, and facilitating postconference coalition…

  9. Middle School Program and Participatory Planning Drive School Design.

    Science.gov (United States)

    Sullivan, Kevin

    1996-01-01

    Uses the example of award-winning Black Hawk Middle School in Minnesota to examine: (1) developing a middle school architecture; (2) benefits of the house concept; (3) the need for staff involvement in school design; (4) assembling houses into schools; (5) reduced discipline problems; (6) fostering teacher collaboration; and (7) measuring success.…

  10. Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

    Science.gov (United States)

    Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

    2010-01-01

    Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

  11. Developing an Embedded Peer Tutor Program in Design Studio to Support First Year Design Students

    Science.gov (United States)

    Zamberlan, Lisa; Wilson, Stephanie

    2015-01-01

    An improved first year student experience is a strategic focus for higher education in an increasingly competitive marketplace. A successful peer tutoring program creates a visible community of practice, supports the student learning experience, elevates senior students as ambassadors of the program, and reinforces an emphasis on learning through…

  12. Efficient System Design and Sustainable Finance for China's Village Electrification Program: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ma, S.; Yin, H.; Kline, D. M.

    2006-08-01

    This paper describes a joint effort of the Institute for Electrical Engineering of the Chinese Academy of Sciences (IEE), and the U.S. National Renewable Energy Laboratory (NREL) to support China's rural electrification program. This project developed a design tool that provides guidelines both for off-grid renewable energy system designs and for cost-based tariff and finance schemes to support them. This tool was developed to capitalize on lessons learned from the Township Electrification Program that preceded the Village Electrification Program. We describe the methods used to develop the analysis, some indicative results, and the planned use of the tool in the Village Electrification Program.

  13. NRC review of passive reactor design certification testing programs: Overview, progress, and regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Levin, A.E.

    1995-09-01

    New reactor designs, employing passive safety systems, are currently under development by reactor vendors for certification under the U.S. Nuclear Regulatory Commission`s (NRC`s) design certification rule. The vendors have established testing programs to support the certification of the passive designs, to meet regulatory requirements for demonstration of passive safety system performance. The NRC has, therefore, developed a process for the review of the vendors` testing programs and for incorporation of the results of those reviews into the safety evaluations for the passive plants. This paper discusses progress in the test program reviews, and also addresses unique regulatory aspects of those reviews.

  14. A Program for Introducing Information Literacy to Commercial Art and Design Students

    Directory of Open Access Journals (Sweden)

    David A. Walczak

    2010-03-01

    Full Text Available This paper describes the process of developing and implementing a comprehensive, school-wide, and sustainable information literacy program at a commercial art and design school. The program requires that information literacy student learning outcomes be included in specific General Education and art and design courses across the curriculum. The results of this multi-year effort indicate that while the program is sound, teaching information literacy is an on-going effort requiring much more training of faculty and students. Best practices in information literacy in library science and art and design literature are reviewed

  15. OSU TOMF Program Site Selection and Preliminary Concept Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Spadling, Steve [Oklahoma State Univ., Stillwater, OK (United States)

    2012-05-10

    The purpose of this report is to confirm the programmatic requirements for the new facilities, identify the most appropriate project site, and develop preliminary site and building concepts that successfully address the overall project goals and site issues. These new facilities will be designed to accommodate the staff, drivers and maintenance requirements for the future mixed fleet of passenger vehicles, Transit Style Buses and School Buses.

  16. Designing an interprofessional training program for shared decision making.

    Science.gov (United States)

    Körner, Mirjam; Ehrhardt, Heike; Steger, Anne-Kathrin

    2013-03-01

    For implementation of patient-centered treatment in interprofessional health care units, such as rehabilitation teams, external participation (interaction between patient and health care professionals) and internal participation (communication, coordination and cooperation in the interprofessional team) need to be considered. The aim of this study is to identify the preferences of patients and health care professionals concerning internal and external participation in rehabilitation clinics, in order to develop an interprofessional shared decision-making (SDM) training program for health care professionals to enhance both types of participation. Therefore, a cross-sectional mixed-methods study was implemented in four rehabilitation clinics. The study consists of two parts: focus groups with patients and a survey of experts (senior health care professionals from medicine, psychotherapy, physical therapy and nursing). More time, more respect from the health care professionals and the desire for more participation in decision-making processes were mentioned most frequently by patients (n = 36) in the focus groups. The health care professionals (n = 32) saw most deficits in internal participation, e.g. management of feedback, talking with difficult team members and moderate conflict discussion. The results of both assessments have been used to develop an interprofessional SDM training program for implementing internal and external participation in interprofessional teams in medical rehabilitation.

  17. Automated a complex computer aided design concept generated using macros programming

    Science.gov (United States)

    Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

    2013-12-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

  18. Automated a complex computer aided design concept generated using macros programming

    International Nuclear Information System (INIS)

    Ramly, Mohammad Rizal; Asrokin, Azharrudin; Rahman, Safura Abd; Zulkifly, Nurul Ain Md

    2013-01-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes

  19. Value of Solar. Program Design and Implementation Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Mike [Solar Electric Power Association, Washington, D.C. (United States); McLaren, Joyce [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cory, Karlynn [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Davidovich, Ted [Solar Electric Power Association, Washington, D.C. (United States); Sterling, John [Solar Electric Power Association, Washington, D.C. (United States); Makhyoun, Miriam [Solar Electric Power Association, Washington, D.C. (United States)

    2015-03-01

    Here, we present an analysis that assesses the potential market type that might form in the United States under a VOS rate, given current national average solar costs and various incentive scenarios, for the most populous city in each state. Three hypothetical VOS tariffs were developed, based on assumptions of avoided fuel costs, avoided capacity, environmental benefits, and line losses, to represent a of range of possible VOS rates. The levelized cost of solar in 50 locations is calculated using NREL’s System Advisor Model (SAM) using input assumptions regarding system size, resource quality, avoided capacity (aka capacity factor) and a variety of incentives. Comparing the solar costs with the hypothetical VOS rates illustrates the various market types that may form under a VOS program, in different locations.

  20. Designing, programming, and optimizing a (small) quantum computer

    Science.gov (United States)

    Svore, Krysta

    In 1982, Richard Feynman proposed to use a computer founded on the laws of quantum physics to simulate physical systems. In the more than thirty years since, quantum computers have shown promise to solve problems in number theory, chemistry, and materials science that would otherwise take longer than the lifetime of the universe to solve on an exascale classical machine. The practical realization of a quantum computer requires understanding and manipulating subtle quantum states while experimentally controlling quantum interference. It also requires an end-to-end software architecture for programming, optimizing, and implementing a quantum algorithm on the quantum device hardware. In this talk, we will introduce recent advances in connecting abstract theory to present-day real-world applications through software. We will highlight recent advancement of quantum algorithms and the challenges in ultimately performing a scalable solution on a quantum device.

  1. Post accident training program design at Three Mile Island

    International Nuclear Information System (INIS)

    Lawyer, L.L.

    1981-01-01

    The TMI preaccident training staff typically consisted of 9 professional and 3 administrative support persons. Procedures were prepared and facilities designated for operator training. The thrust of the post accident effort was directed to expanding the training function to include all other personnel while modifying the operator training to address lessons learned. Significant experiences were encountered in part task simulation, job and task analysis, decision analysis and with various external committees. These experiences led to specific opinions on industry needs in the areas of staffing, regulation, importance of training and contractor assistance

  2. 12 CFR 225.127 - Investment in corporations or projects designed primarily to promote community welfare.

    Science.gov (United States)

    2010-01-01

    .... For bank holding companies that file the FR Y-9C (Consolidated Financial Statements for Bank Holding... the FR Y-SP (Parent Company Only Financial Statements for Small Bank Holding Companies), an... CONTROL (REGULATION Y) Regulations Financial Holding Companies Interpretations § 225.127 Investment in...

  3. Application programs written by using customizing tools of a computer-aided design system

    Energy Technology Data Exchange (ETDEWEB)

    Li, X.; Huang, R.; Juricic, D. [Univ. of Texas, Austin, TX (United States). Mechanical Engineering Dept.

    1995-12-31

    Customizing tools of Computer-Aided Design Systems have been developed to such a degree as to become equivalent to powerful higher-level programming languages that are especially suitable for graphics applications. Two examples of application programs written by using AutoCAD`s customizing tools are given in some detail to illustrate their power. One tool uses AutoLISP list-processing language to develop an application program that produces four views of a given solid model. The other uses AutoCAD Developmental System, based on program modules written in C, to produce an application program that renders a freehand sketch from a given CAD drawing.

  4. Java programming fundamentals problem solving through object oriented analysis and design

    CERN Document Server

    Nair, Premchand S

    2008-01-01

    While Java texts are plentiful, it's difficult to find one that takes a real-world approach, and encourages novice programmers to build on their Java skills through practical exercise. Written by an expert with 19 experience teaching computer programming, Java Programming Fundamentals presents object-oriented programming by employing examples taken from everyday life. Provides a foundation in object-oriented design principles and UML notation Describes common pitfalls and good programming practicesFurnishes supplemental links, documents, and programs on its companion website, www.premnair.netU

  5. NASIS data base management system - IBM 360/370 OS MVT implementation. 4: Program design specifications

    Science.gov (United States)

    1973-01-01

    The design specifications for the programs and modules within the NASA Aerospace Safety Information System (NASIS) are presented. The purpose of the design specifications is to standardize the preparation of the specifications and to guide the program design. Each major functional module within the system is a separate entity for documentation purposes. The design specifications contain a description of, and specifications for, all detail processing which occurs in the module. Sub-modules, reference tables, and data sets which are common to several modules are documented separately.

  6. LTFR-4, Library Generated for Fast Reactor Design Program from JAERI Fast-Set Multigroup Constant

    International Nuclear Information System (INIS)

    Suzuki, Tomoo

    1971-01-01

    Nature of physical problem solved: The program processes JAERI-Fast group constants sets of less than 30-group and prepares a binary library tape for efficient usage by a series of related fast reactor design calculation programmes

  7. Understanding the design research process: The evolution of a professional development program in Indian slums

    NARCIS (Netherlands)

    McKenney, Susan; Raval, Harini; Pieters, Jules

    2011-01-01

    McKenney, S., Raval, H., & Pieters, J. (2011, 8-12 April). Understanding the design research process: The evolution of a professional development program in Indian slums. Presentation at AERA annual meeting, New Orleans.

  8. Understanding the design research process: The evolution of a professional development program in Indian slums

    OpenAIRE

    McKenney, Susan; Raval, Harini; Pieters, Jules

    2011-01-01

    McKenney, S., Raval, H., & Pieters, J. (2011, 8-12 April). Understanding the design research process: The evolution of a professional development program in Indian slums. Paper presentation at AERA annual meeting, New Orleans.

  9. Understanding the design research process: The evolution of a professional development program in Indian slums

    NARCIS (Netherlands)

    McKenney, Susan; Raval, Harini; Pieters, Jules

    2012-01-01

    McKenney, S., Raval, H., & Pieters, J. (2011, 8-12 April). Understanding the design research process: The evolution of a professional development program in Indian slums. Paper presentation at AERA annual meeting, New Orleans.

  10. Using the lessons of behavioral economics to design more effective pay-for-performance programs.

    Science.gov (United States)

    Mehrotra, Ateev; Sorbero, Melony E S; Damberg, Cheryl L

    2010-07-01

    To describe improvements in the design of pay-for-performance (P4P) programs that reflect the psychology of how people respond to incentives. Investigation of the behavioral economics literature. We describe 7 ways to improve P4P program design in terms of frequency and types of incentive payments. After discussing why P4P incentives can have unintended adverse consequences, we outline potential ways to mitigate these. Although P4P incentives are increasingly popular, the healthcare literature shows that these have had minimal effect. Design improvements in P4P programs can enhance their effectiveness. Lessons from behavioral economics may greatly enhance the design and effectiveness of P4P programs in healthcare, but future work is needed to demonstrate this empirically.

  11. Mesh control information of windmill designed by Solidwork program

    Science.gov (United States)

    Mulyana, T.; Sebayang, D.; Rafsanjani, A. M. D.; Adani, J. H. D.; Muhyiddin, Y. S.

    2017-12-01

    This paper presents the mesh control information imposed on the windmill already designed. The accuracy of Simulation results is influenced by the quality of the created mesh. However, compared to the quality of the mesh is made, the simulation time running will be done software also increases. The smaller the size of the elements created when making the mesh, the better the mesh quality will be generated. When adjusting the mesh size, there is a slider that acts as the density regulator of the element. SolidWorks Simulation also has Mesh Control facility. Features that can adjust mesh density only in the desired part. The best results of mesh control obtained for both static and thermal simulation have ratio 1.5.

  12. Programming peptidomimetic syntheses by translating genetic codes designed de novo.

    Science.gov (United States)

    Forster, Anthony C; Tan, Zhongping; Nalam, Madhavi N L; Lin, Hening; Qu, Hui; Cornish, Virginia W; Blacklow, Stephen C

    2003-05-27

    Although the universal genetic code exhibits only minor variations in nature, Francis Crick proposed in 1955 that "the adaptor hypothesis allows one to construct, in theory, codes of bewildering variety." The existing code has been expanded to enable incorporation of a variety of unnatural amino acids at one or two nonadjacent sites within a protein by using nonsense or frameshift suppressor aminoacyl-tRNAs (aa-tRNAs) as adaptors. However, the suppressor strategy is inherently limited by compatibility with only a small subset of codons, by the ways such codons can be combined, and by variation in the efficiency of incorporation. Here, by preventing competing reactions with aa-tRNA synthetases, aa-tRNAs, and release factors during translation and by using nonsuppressor aa-tRNA substrates, we realize a potentially generalizable approach for template-encoded polymer synthesis that unmasks the substantially broader versatility of the core translation apparatus as a catalyst. We show that several adjacent, arbitrarily chosen sense codons can be completely reassigned to various unnatural amino acids according to de novo genetic codes by translating mRNAs into specific peptide analog polymers (peptidomimetics). Unnatural aa-tRNA substrates do not uniformly function as well as natural substrates, revealing important recognition elements for the translation apparatus. Genetic programming of peptidomimetic synthesis should facilitate mechanistic studies of translation and may ultimately enable the directed evolution of small molecules with desirable catalytic or pharmacological properties.

  13. Designing anatomy program in modern medical curriculum: matter of balance.

    Science.gov (United States)

    Grković, Ivica; Marinović Guić, Maja; Kosta, Vana; Poljicanin, Ana; Carić, Ana; Vilović, Katarina

    2009-02-01

    To evaluate the structure of the anatomy program in the first year medical curriculum of University of Split School of Medicine by comparing it with the recommendations by the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) and the Terminologia Anatomica (TA); we also quantitatively evaluated the organization of teaching material in contemporary topographical anatomy textbooks and matched them with the AACA recommendations, TA, and the curriculum of the anatomy course taught at Medical School in Split, Croatia. TA, official recommendations of the AACA, 6 contemporary anatomy textbooks, and the structure of the anatomy course were analyzed for the proportion of the terms or text devoted to standard topographical regions of the body. The findings were correlated using Spearman rho test. The curriculum outline correlated both with the AACA recommendations (Spearman rho=0.83, P=0.015) and TA (Spearman rho=0.73, P=0.046). Textbooks contained 8 distinct sections, 7 allocated to topographic anatomy regions and 1 to general anatomy concepts and principles. The structure of all textbooks correlated significantly with the course curriculum. However, 4 out of 6 textbooks did not correlate with TA and only a single textbook showed significant correlation with the AACA recommendations. Anatomy textbooks vary in the amount of text dedicated to different parts of topographical anatomy and are not quite concordant with curriculum recommendations and standard anatomical terminology. Planning the structure of an anatomy course should not be based on a single book or recommendation but on evidence.

  14. Optimum structural design using MSC/NASTRAN and sequential quadratic programming

    Science.gov (United States)

    Mahmoud, K. G.; Engl, H. W.; Holzleitner, L.

    1994-08-01

    A methodology is described for structural optimization using the commercial finite element package MSC/NASTRAN for structural analysis, a quasi-analytical method for design sensitivity analysis, and sequential quadratic programming with an active set strategy for optimization. The optimization and sensitivity analysis modules are efficiently coupled with MSC/NASTRAN using DMAP (direct matrix abstraction program) statements. To demonstrate the feasibility of the proposed methodology, the design optimization of a unit injector rocker arm is presented as an example.

  15. Computer Programs for LB/TS Test Design: Technical Description, Usage Instructions and Source Code Listings

    Science.gov (United States)

    1995-09-01

    this subprogram defines the relationship bet~een the ·actuator position c louver angle and open area for the end vend of the LB /TS RWE c c...ARMY RESEARCH UBORA TORY Computer Programs for LB {fS Test Design: Technical Description, Usage Instructions and Source Code Listings ARL-MR-260...COVERED Final, Oct 94 - May 95 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Computer Programs for LB /TS Test Design: Technical Description, Usage

  16. A framework for evaluating and designing citizen science programs for natural resources monitoring.

    Science.gov (United States)

    Chase, Sarah K; Levine, Arielle

    2016-06-01

    We present a framework of resource characteristics critical to the design and assessment of citizen science programs that monitor natural resources. To develop the framework we reviewed 52 citizen science programs that monitored a wide range of resources and provided insights into what resource characteristics are most conducive to developing citizen science programs and how resource characteristics may constrain the use or growth of these programs. We focused on 4 types of resource characteristics: biophysical and geographical, management and monitoring, public awareness and knowledge, and social and cultural characteristics. We applied the framework to 2 programs, the Tucson (U.S.A.) Bird Count and the Maui (U.S.A.) Great Whale Count. We found that resource characteristics such as accessibility, diverse institutional involvement in resource management, and social or cultural importance of the resource affected program endurance and success. However, the relative influence of each characteristic was in turn affected by goals of the citizen science programs. Although the goals of public engagement and education sometimes complimented the goal of collecting reliable data, in many cases trade-offs must be made between these 2 goals. Program goals and priorities ultimately dictate the design of citizen science programs, but for a program to endure and successfully meet its goals, program managers must consider the diverse ways that the nature of the resource being monitored influences public participation in monitoring. © 2016 Society for Conservation Biology.

  17. The Design and Analysis Program for the Development of LEO Satellite Electrical Power Subsystem

    Directory of Open Access Journals (Sweden)

    Sang-Kon Lee

    2007-06-01

    Full Text Available The design and analysis of satellite power subsystem is an important driver for the mass, size, and capability of the satellite. Every other satellite subsystem is affected by the power subsystem, and in particular, important issues such as launch vehicle selection, thermal design, and structural design are largely influenced by the capabilities and limitations of the power system. This paper introduces a new electrical power subsystem design program for the rapid development of LEO satellite and shows an example of design results using other LEO satellite design data. The results shows that the proposed design program can be used the optimum sizing and the analytical prediction of the on-orbit performance of satellite electrical power subsystem.

  18. A worksite prevention program for construction workers: Design of a randomized controlled trial

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Joling, C.I.; Proper, K.I.; Blatter, B.M.; Bongers, P.M.

    2010-01-01

    Background. A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program

  19. Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

    Science.gov (United States)

    Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

    2015-01-01

    The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

  20. Are Water-Related Leadership Development Programs Designed to Be Effective? An Exploratory Study

    Science.gov (United States)

    Burbach, Mark E.; Floress, Kristin; Kaufman, Eric K.

    2015-01-01

    Water resource professionals and others involved in managing water resources face increasingly complex challenges. Effective leadership development programs are needed to produce water leaders who can address these challenges. Leadership programs must be designed not simply to increase participants' environmental and leadership knowledge but to…

  1. Research Suggestions in the Design of a Global Graduate Business Program Delivered by Online Learning

    Science.gov (United States)

    Puderbaugh, Amy

    2015-01-01

    The purpose of this paper was to examine the unique areas of concern when establishing an eLearning program in the field of global business. A survey of eLearning and a global management subject matter appears. This paper identifies potential challenges in program design and raises practical concerns for future research. [For the full proceedings,…

  2. Fellowship Program in the Design and Development of Instructional Materials. Final Report.

    Science.gov (United States)

    Fleming, Malcolm; Pett, Dennis

    A two-year graduate program leading to a specialists's degree was administered to train individuals in the design of instructional materials for elementary, secondary, vocational and special education curricula. The program sought to achieve a multiplier effect by placing its graduates in positions in which they could help other educators to…

  3. The Design and Implementation of a Counselor-in-Residence Program

    Science.gov (United States)

    Orchowski, Lindsay M.; Castelino, Paul; Ng, H. Mei; Cosio, David; Heaton, Jeanne A.

    2011-01-01

    Comprehensive--yet cost-effective--provision of psychological care is a timely concern for most college counseling centers. The current review summarizes the components of a program designed to meet such seemingly discordant demands. The Counselor-in-Residence program places live-in, doctoral students in clinical psychology/counselor education, in…

  4. Designing a Master's Program in Corporate Communication at an Urban University: A Case Study.

    Science.gov (United States)

    Patterson, Margaret Jones

    To assess how an urban university can take advantage of its setting to design a master's program in corporate communication, a 1987 study of the master's program in corporate communication at Duquesne University of Pittsburgh was conducted. Data were obtained through a survey of 590 local communication professionals, of whom 270 responded (a…

  5. An Integer Programming Approach to Item Pool Design. Research Report 98-11.

    Science.gov (United States)

    van der Linden, Wim J.; Veldkamp, Bernard P.; Reese, Lynda M.

    An integer programming approach to item pool design is presented that can be used to calculate an optimal blueprint for an item pool to support an existing testing program. The results are optimal in the sense that they minimize the efforts involved in actually producing the items as revealed by current item writing patterns. Also, an adaptation…

  6. Prescription drug monitoring program design and function: A qualitative analysis.

    Science.gov (United States)

    Rutkow, Lainie; Smith, Katherine C; Lai, Alden Yuanhong; Vernick, Jon S; Davis, Corey S; Alexander, G Caleb

    2017-11-01

    Opioid-related overdose deaths are a major public health challenge. Forty-nine states have implemented Prescription Drug Monitoring Programs (PDMPs) that collect information about individuals' prescription medications. Little is known about state governments' implementation of PDMPs. We conducted semi-structured interviews with PDMP staff, law enforcement officials, and administrative agency employees to learn about their attitudes and experiences with PDMPs. From May 2015 to June 2016, we conducted 37 semi-structured interviews with state actors in four states. Questions focused on interviewees' perceptions about PDMP goals, home agency characteristics, and future PDMP initiatives. States were selected purposively. Interviewees were identified through purposive and snowball sampling. Interviewees identified key PDMP goals as: improve patient treatment decisions; influence prescribing practices; assist in the identification of "doctor shoppers"; and serve as a tool for law enforcement. Interviewees identified the following characteristics as key for a PDMP's home agency: regulatory and enforcement authority; intra- and inter-agency collaboration; and commitment to data quality and protection. Interviewees identified three promising areas for future PDMP efforts: data sharing and analysis; integration of PDMP data with electronic medical records; and training for current and potential PDMP users. Our findings reveal areas that states may want to prioritize, including improving prescribers' knowledge and use of the PDMP as well as fostering inter-agency collaborations that include PDMP staff. By capitalizing on these opportunities, state governments may improve the effectiveness of their PDMPs, potentially making them more useful tools to curb the morbidity and mortality associated with opioid use disorders. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Designing Anatomy Program in Modern Medical Curriculum: Matter of Balance

    Science.gov (United States)

    Grković, Ivica; Marinović Guić, Maja; Košta, Vana; Poljičanin, Ana; Čarić, Ana; Vilović, Katarina

    2009-01-01

    Aim To evaluate the structure of the anatomy program in the first year medical curriculum of University of Split School of Medicine by comparing it with the recommendations by the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) and the Terminologia Anatomica (TA); we also quantitatively evaluated the organization of teaching material in contemporary topographical anatomy textbooks and matched them with the AACA recommendations, TA, and the curriculum of the anatomy course taught at Medical School in Split, Croatia. Methods TA, official recommendations of the AACA, 6 contemporary anatomy textbooks, and the structure of the anatomy course were analyzed for the proportion of the terms or text devoted to standard topographical regions of the body. The findings were correlated using Spearman ρ test. Results The curriculum outline correlated both with the AACA recommendations (Spearman ρ = 0.83, P = 0.015) and TA (Spearman ρ = 0.73, P = 0.046). Textbooks contained 8 distinct sections, 7 allocated to topographic anatomy regions and 1 to general anatomy concepts and principles. The structure of all textbooks correlated significantly with the course curriculum. However, 4 out of 6 textbooks did not correlate with TA and only a single textbook showed significant correlation with the AACA recommendations. Conclusion Anatomy textbooks vary in the amount of text dedicated to different parts of topographical anatomy and are not quite concordant with curriculum recommendations and standard anatomical terminology. Planning the structure of an anatomy course should not be based on a single book or recommendation but on evidence. PMID:19260144

  8. Optimizing Biorefinery Design and Operations via Linear Programming Models

    Energy Technology Data Exchange (ETDEWEB)

    Talmadge, Michael; Batan, Liaw; Lamers, Patrick; Hartley, Damon; Biddy, Mary; Tao, Ling; Tan, Eric

    2017-03-28

    The ability to assess and optimize economics of biomass resource utilization for the production of fuels, chemicals and power is essential for the ultimate success of a bioenergy industry. The team of authors, consisting of members from the National Renewable Energy Laboratory (NREL) and the Idaho National Laboratory (INL), has developed simple biorefinery linear programming (LP) models to enable the optimization of theoretical or existing biorefineries. The goal of this analysis is to demonstrate how such models can benefit the developing biorefining industry. It focuses on a theoretical multi-pathway, thermochemical biorefinery configuration and demonstrates how the biorefinery can use LP models for operations planning and optimization in comparable ways to the petroleum refining industry. Using LP modeling tools developed under U.S. Department of Energy's Bioenergy Technologies Office (DOE-BETO) funded efforts, the authors investigate optimization challenges for the theoretical biorefineries such as (1) optimal feedstock slate based on available biomass and prices, (2) breakeven price analysis for available feedstocks, (3) impact analysis for changes in feedstock costs and product prices, (4) optimal biorefinery operations during unit shutdowns / turnarounds, and (5) incentives for increased processing capacity. These biorefinery examples are comparable to crude oil purchasing and operational optimization studies that petroleum refiners perform routinely using LPs and other optimization models. It is important to note that the analyses presented in this article are strictly theoretical and they are not based on current energy market prices. The pricing structure assigned for this demonstrative analysis is consistent with $4 per gallon gasoline, which clearly assumes an economic environment that would favor the construction and operation of biorefineries. The analysis approach and examples provide valuable insights into the usefulness of analysis tools for

  9. Designing a tool for curriculum leadership development in postgraduate programs

    Directory of Open Access Journals (Sweden)

    M Avizhgan

    2016-07-01

    Full Text Available Introduction: Leadership in the area of curriculum development is increasingly important as we look for ways to improve our programmes and practices. In curriculum studies, leadership has received little attention. Considering the lack of an evaluation tool with objective criteria in postgraduate curriculum leadership process, this study aimed to design a specific tool and determine the validity and reliability of the tool. Method: This study is a methodological research.  At first, domains and items of the tool were determined through expert interviews and literature review. Then, using Delphi technique, 54 important criteria were developed. A panel of experts was used to confirm content and face validity. Reliability was determined by a descriptive study in which 30 faculties from two of Isfahan universities and was estimated by internal consistency. The data were analyzed by SPSS software, using Pearson Correlation Coefficient and reliability analysis. Results: At first, considering the definition of curriculum leadership determined the domains and items of the tool and they were developed primary tool. Expert’s faculties’ views were used in deferent stages of development and psychometry. The tool internal consistency with Cronbach's alpha coefficient times was 96.5. This was determined for each domain separately. Conclution: Applying this instrument can improve the effectiveness of curriculum leadership. Identifying the characteristics of successful and effective leaders, and utilizing this knowledge in developing and implementing curriculum might help us to have better respond to the changing needs of our students, teachers and schools of tomorrow.

  10. Residential energy efficiency retrofits: How program design affects participation and outcomes

    International Nuclear Information System (INIS)

    Hoicka, Christina E.; Parker, Paul; Andrey, Jean

    2014-01-01

    Better methods of characterizing and addressing heterogeneity in preferences and decision making are needed to stimulate reductions in household greenhouse gas emissions. Four residential energy efficiency programs were delivered consecutively in the Region of Waterloo, Canada, between 1999 and 2011, and each offered a unique combination of information, financial reward structure, and price. A natural quasi-experimental intervention design was employed to assess differences in outcomes across these program structures. Participation at the initial (evaluation by an energy advisor) and follow-up (verification of retrofit) stages, and the material characteristics (e.g., energy performance) were measured and compared between the groups of houses included in each program at each stage. The programs appealed to people with different types of material concerns; each phase of the program was associated with houses with a different mix of material characteristics and depths of recommended and achieved changes. While a performance-based reward attracted fewer houses at each stage than a larger list-based reward, older houses with poorer energy performance were included at each stage. The findings support experimentation with program designs to target sub-populations of housing stock; future program designs should experiment more carefully and with larger performance-based rewards and test parallels with potential carbon market structures. - Highlights: • Multi-program data over 12 years detailing residential energy retrofits. • Natural experimental intervention research design for program evaluation. • Number and attributes of participating households differed by program design. • Financial rewards attracted more participants to the verification stage. • Performance-based incentives have the largest potential for energy savings

  11. Rationale for the Design of a Web-based Programming Course for Adults

    DEFF Research Database (Denmark)

    Bennedsen, Jens; Caspersen, Michael Edelgaard

    2003-01-01

    for choosing technologies and organizing the course in order to compensate for the drawbacks inherent in this kind of teaching. Our conclusions, although presented in the context of an introductory programming course, holds for most other construction-based courses as well. In the first part we set the stage......Web-based distance education is becoming more and more popular in particular for part-time educations primarily because it flexibly adapts to a busy life where family and work has first priority. Students can follow the course without wasting precious time traveling to and from campus several...... assistant as well as the other students. Another serious drawback is the reduced bandwidth in communication among the different actors. Precautions have to be taken in order to compensate for these and other drawbacks. We describe a web-based introductory programming course for adults and the rationale...

  12. Training Program for Practical Engineering Design through the Collaboration with Regional Companies

    Science.gov (United States)

    Gofuku, Akio; Tabata, Nobuhisa; Tomita, Eiji; Funabiki, Nobuo

    An education program to bring up engineering design capabilities through long-term internship by the collaboration with regional companies has been put in practice for five years. The program is composed of two types of long-term internships and several lectures for patent systems and engineering ethics. This paper describes the outline of the program, educational effects, and our experiences. The program was improved into two educational programs in 2011. The one is a special course to educate engineers and scientists who can lead the technologies of their domains. The other is a long-term internship program for master students in engineering divisions of graduate school. This paper also describes the current activities of the latter program.

  13. Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2007-06-01

    Increasing levels of financial support for customer-sited photovoltaic (PV) systems, provided through publicly-funded incentive programs, has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in ensuring that PV systems receiving incentives perform well. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address performance issues, and highlight important differences in the implementation of these strategies among programs.

  14. STEM integration in middle school career and technical education programs: A Delphi design study

    Science.gov (United States)

    Wu-Rorrer, Billy Ray

    The purpose of this qualitative method study with a Delphi research design sought to determine how STEM programs can be effectively integrated into middle school career and technical education programs by local, state, and national educators, administrators, directors, specialists, and curriculum writers. The significance of the study is to provide leaders in CTE with a greater awareness, insight, and strategies about how CTE programs can more effectively integrate academics into career and technical education programs through STEM-related programming. The findings will increase the limited amount of available literature providing best practice strategies for the integration of STEM curriculum into middle school CTE programs. One basic question has guided this research: How can STEM programs be effectively integrated into middle school career and technical education programs? A total of twelve strategies were identified. The strategies of real-world applications and administrative buy-in were the two predominant strategies consistently addressed throughout the review of literature and all three sub-questions in the research study. The Delphi design study consisted of pilot round and three rounds of data collection on barriers, strategies, and professional development for STEM integration in middle school career and technical education programs. Four panelists participated in the pilot round, and 16 panel members not involved in the pilot round participated in the three rounds of questioning and consensus building. In the future, more comprehensive studies can build upon this foundational investigation of middle school CTE programs.

  15. 78 FR 19261 - Safe Drinking Water Act Sole Source Aquifer Program; Designation of Bainbridge Island, Washington...

    Science.gov (United States)

    2013-03-29

    ... principle source of drinking water for the citizens of Bainbridge Island and that this aquifer system, if... designation. II. Basis for Determination EPA defines a sole or principle source aquifer as an aquifer or... ENVIRONMENTAL PROTECTION AGENCY Safe Drinking Water Act Sole Source Aquifer Program; Designation...

  16. Apparel Design and Production: A Suggested Program Guide. Fashion Industry Series No. 2.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The apparel design and production guide is the second of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. Designed to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific categories of jobs,…

  17. Instructional strategies and tactics for the design of introductory computer programming courses in high school

    NARCIS (Netherlands)

    van Merrienboer, Jeroen J.G.; Krammer, H.P.M.

    1987-01-01

    This article offers an examination of instructional strategies and tactics for the design of introductory computer programming courses in high school. We distinguish the Expert, Spiral and Reading approach as groups of instructional strategies that mainly differ in their general design plan to

  18. Windows Calorimeter Control (WinCal) program computer software design description

    International Nuclear Information System (INIS)

    Pertzborn, N.F.

    1997-01-01

    The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

  19. 78 FR 19799 - National Baseball Hall of Fame Commemorative Coin Program Design Competition

    Science.gov (United States)

    2013-04-02

    ... DEPARTMENT OF THE TREASURY United States Mint National Baseball Hall of Fame Commemorative Coin... Commemorative Coin Program Design Competition on April 11, 2013. SUMMARY: The United States Mint announces the opening of a national coin design competition that will culminate in the Secretary of the Treasury's...

  20. Assessing International Product Design and Development Graduate Courses: The MIT-Portugal Program

    Science.gov (United States)

    Dori, Yehudit Judy; Silva, Arlindo

    2010-01-01

    The Product Design and Development (PDD) course is part of the graduate curriculum in the Engineering Design and Advanced Manufacturing (EDAM) study in the MIT-Portugal Program. The research participants included about 110 students from MIT, EDAM, and two universities in Portugal, Instituto Superior Técnico-Universidade Técnica de Lisboa (IST) and…

  1. European passive plant program A design for the 21st century

    International Nuclear Information System (INIS)

    Adomaitis, D.; Oyarzabal, M.

    1998-01-01

    In 1994, a group of European utilities initiated, together with Westinghouse and its industrial partner GENESI (an Italian consortium including ANSALDO and FIAT), a program designated EPP (European Passive Plant) to evaluate Westinghouse passive nuclear plant technology for application in Europe. The following major tasks were accomplished: (1) the impacts of the European utility requirements (EUR) on the Westinghouse nuclear island design were evaluated; and (2) a 1000 MWe passive plant reference design (EP1000) was established which conforms to the EUR and is expected to be licensable in Europe. With respect to safety systems and containment, the reference plant design closely follows that of the Westinghouse simplified pressurized water reactor (SPWR) design, while the AP600 plant design has been taken as the basis for the EP1000 reference design in the auxiliary system design areas. However, the EP1000 design also includes features required to meet the EUR, as well as key European licensing requirements. (orig.)

  2. Design and Implementation of a Pilot Obesity Prevention Program in a Low-Resource School: Lessons Learned and Research Recommendations

    Science.gov (United States)

    Baskin, Monica L.; Zunker, Christie; Worley, Courtney B.; Dial, Brenda; Kimbrough, Linda

    2009-01-01

    Purpose: This paper seeks to describe the design, implementation, and lessons learned from an obesity prevention pilot program delivered in a low resource school in the USA. Design/methodology/approach: A planned program evaluation was conducted to: document explicitly the process of designing and implementing the program; and assess the…

  3. [Design for constructability studies in support of the DOE ALWR (Advanced Light Water Reactor) Program

    International Nuclear Information System (INIS)

    1990-03-01

    This technical report accounts for work performed as part of Duke Power Company's Design for Constructability Program. This program is contractual agreement AC03-86SF16566, part of the US Department of Energy's Technology Program in Support of Advanced Light Water Reactors. This report covers the period from contract inception (September 1986) through completion (March 1990). This report is divided into 4 volumes. Volume 1 includes the executive summary and significant program conclusions. The details supporting these conclusions are in Volume 3, Improving Construction Performance, and Volume 4, Enchancing Constructability Through Design. Volume 2 includes a description of the program, objectives, and approach. A significant conclusion from these discussions was the identification of a ''missing link'' in ALWR programs. With an essentially complete, certified design, the majority of the up-front planning and preparation for implementing the design can be accomplished. Though a monumental undertaking beyond the scope of this project, this up-front planning and preparation must be considered as the next logical step for standardization. Much of the planning can be repeated with future plants and marketed to recoup expenditures. Devoting resources to develop the standard design (evolutionary or passive) to a marketable, standard, and comprehensive plant package is essential to revitalizing the option of nuclear energy. The DOE should seriously consider devoting these resources as a logical extension of its ALWR support

  4. The computer program system for structural design of nuclear power plants

    International Nuclear Information System (INIS)

    Aihara, S.; Atsumi, K.; Sasagawa, K.; Satoh, S.

    1979-01-01

    In recent days, the design method of the Nuclear Power Plant has become more complex than in the past. The Finite Element Method (FEM) applied for analysis of Nuclear Power Plants, especially requires more computer use. The recent computers have made remarkable progress, so that in design work manpower and time necessary for analysis have been reduced considerably. However, instead the arrangement of outputs have increased tremendously. Therefore, a computer program system was developed for performing all of the processes, from data making to output arrangement, and rebar evaluations. This report introduces the computer program system pertaining to the design flow of the Reactor Building. (orig.)

  5. Fundamental attributes of a practical configuration management program for nuclear plant design control

    International Nuclear Information System (INIS)

    Klein, S.M.

    1988-06-01

    This summarizes the results of an evaluation of findings identifies during a number of Safety-System Functional Inspections and Safety System Outage Modification Inspections which are related to configuration management for nuclear plant design control. A computerized database of these findings was generated from a review of the design inspection reports. Based on the results of the evaluation, attributes of a configuration management program were developed which are responsive to minimizing these types of inspection findings. Incorporation of these key attributes is considered good practice in the development of a configuration management program for design control at operating nuclear plants

  6. The Engineering Compliance Program development process and its role in design

    International Nuclear Information System (INIS)

    1997-12-01

    This paper presents an overview of the Engineering Compliance Program (ECP) development process and its role in design. The ECP is a formal program to assess Nuclear Regulatory Commission (NRC) regulatory guidance in terms of precedence, industry experience documents, and codes and standards to determine their applicability to Mined Geologic Disposal System (MGDS) design. These determinations are documented in ECP Guidance Packages for MGDS Structures, Systems and Components (SSCs). This ensures that the license application appropriately reflects the MGDS design and facilitates NRC acceptance and compliance review

  7. Control system design and analysis using the INteractive Controls Analysis (INCA) program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.

    1987-01-01

    The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

  8. BREED: a CDC-7600 computer program for the automation of breeder reactor design analysis (LWBR Development Program)

    International Nuclear Information System (INIS)

    Candelore, N.R.; Maher, C.M.

    1985-03-01

    BREED is an executive CDC-7600 program which was developed to facilitate the sequence of calculations and movement of data through a prescribed series of breeder reactor design computer programs in an uninterrupted single-job mode. It provides the capability to interface different application programs into a single computer run to provide a complete design function. The automation that can be achieved as a result of using BREED significantly reduces not only the time required for data preparation and hand transfer of data, but also the time required to complete an iteration of the total design effort. Data processing within a technical discipline and data transfer between technical disciplines can be accommodated. The input/output data processing is achieved with BREED by using a set of simple, easily understood user commands, usually short descriptive words, which the user inserts in his input deck. The input deck completely identifies and controls the calculational sequence needed to produce a desired end product. This report has been prepared to provide instructional material on the use of BREED and its user-oriented procedures to facilitate computer automation of design calculations

  9. Designing and Implementing INTREPID, an Intensive Program in Translational Research Methodologies for New Investigators

    Science.gov (United States)

    Aphinyanaphongs, Yindalon; Shao, Yongzhao; Micoli, Keith J.; Fang, Yixin; Goldberg, Judith D.; Galeano, Claudia R.; Stangel, Jessica H.; Chavis‐Keeling, Deborah; Hochman, Judith S.; Cronstein, Bruce N.; Pillinger, Michael H.

    2014-01-01

    Abstract Senior housestaff and junior faculty are often expected to perform clinical research, yet may not always have the requisite knowledge and skills to do so successfully. Formal degree programs provide such knowledge, but require a significant commitment of time and money. Short‐term training programs (days to weeks) provide alternative ways to accrue essential information and acquire fundamental methodological skills. Unfortunately, published information about short‐term programs is sparse. To encourage discussion and exchange of ideas regarding such programs, we here share our experience developing and implementing INtensive Training in Research Statistics, Ethics, and Protocol Informatics and Design (INTREPID), a 24‐day immersion training program in clinical research methodologies. Designing, planning, and offering INTREPID was feasible, and required significant faculty commitment, support personnel and infrastructure, as well as committed trainees. PMID:25066862

  10. Design and modeling of solar sea power plants by geometric programming

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C. C.

    1976-04-01

    Geometric programming, a nonlinear optimization technique, is used to design Solar Sea Power Plants (SSPP). The conversion process is described, and the hardware necessary to implement a binary-fluid, closed-Rankine cycle is identified. Steady-state analytical models for the major components are derived. These models are then used as the constraints of a geometric program whose objective function is the minimization of a particular function of the design variables of the SSPP. A variety of problems are solved. On one extreme, they include simply the design of a minimum surface heat exchanger for a SSPP, and on another extreme the selection of the various water pipes for a given ocean site, accounting for all the hydraulic losses. The geometric programming technique produces the optimum design and, more importantly, the sensitivity of the objective function at the optimum to variations in cost figures, constraint bounds, and arbitrary constants of the model. It is demonstrated that geometric programming is an economical and effective tool for the analysis and design of complex interacting engineering systems involving many variables and constraints. In particular, it is concluded that geometric programming is effective in a variety of situations encountered in the design of Solar Sea Power Plants.

  11. A COMPUTER APPLICATION FOR THE ARCHITECTURAL PROGRAM DEVELOPMENT IN DESIGN EDUCATION

    Directory of Open Access Journals (Sweden)

    Daniel de Carvalho Moreira

    2012-02-01

    Full Text Available The development of the architectural program in the design studio faces several difficulties. The purpose of the program is to describe the conditions where the building being designed will operate; this requires a lot of information and organization. Due to its complexity, the architetural program definition in the disciplines of design is often simplified. This article discusses such issue and proposes a computer application (SINFORMA that gathers information about the building and the theme of the project in order to develop the architectural program based on structures proposed by bibliographic references. The SINFORMA is composed by a framework which includes a data base and modules which analyze and organize functional requirements, according to the Problem Seeking method and the contemporary values of architecture enumerated by Hershberger. It is discussed how the application can be applied in design education and how it offers students a practical approach and a comprehensive data analysis for the design of built environment. Keywords: Architectural programming, Architectural design, Education.

  12. Design Program in Graphic User Interface Environment for Automobile ER Devices

    Science.gov (United States)

    Lim, S. C.; Park, J. S.; Sohn, J. W.; Choi, S. B.

    This work presents a design and analysis program for vehicle devices utilizing an electrorheological (ER) fluid. The program is operated in graphic user interface (GUI) environment and the initial window is consisted of four subprogram modules which are related to ER shock absorber, ER seat damper, ER engine mount, and ER anti-lock brake system (ABS), respectively. In order to execute each module, both material properties and design parameters are to be chosen by the user. Then, the output display window shows the field-dependent performance characteristics to be considered as design criteria. In addition, control performances of the vehicle system equipped with ER devices are displayed in time and frequency domain. In order to demonstrate the effectiveness of the proposed program, ER shock absorber and ER ABS are designed and manufactured and their performance characteristics are evaluated.

  13. POBE: A Computer Program for Optimal Design of Multi-Subject Blocked fMRI Experiments

    Directory of Open Access Journals (Sweden)

    Bärbel Maus

    2014-01-01

    Full Text Available For functional magnetic resonance imaging (fMRI studies, researchers can use multi-subject blocked designs to identify active brain regions for a certain stimulus type of interest. Before performing such an experiment, careful planning is necessary to obtain efficient stimulus effect estimators within the available financial resources. The optimal number of subjects and the optimal scanning time for a multi-subject blocked design with fixed experimental costs can be determined using optimal design methods. In this paper, the user-friendly computer program POBE 1.2 (program for optimal design of blocked experiments, version 1.2 is presented. POBE provides a graphical user interface for fMRI researchers to easily and efficiently design their experiments. The computer program POBE calculates the optimal number of subjects and the optimal scanning time for user specified experimental factors and model parameters so that the statistical efficiency is maximised for a given study budget. POBE can also be used to determine the minimum budget for a given power. Furthermore, a maximin design can be determined as efficient design for a possible range of values for the unknown model parameters. In this paper, the computer program is described and illustrated with typical experimental factors for a blocked fMRI experiment.

  14. Effects of program design on the professional socialization of RN-BSN students.

    Science.gov (United States)

    Eckhardt, Jo Anne

    2002-01-01

    The purpose of this study was to examine effects of program design on the bureaucratic and professional role conceptions of registered nurses in baccalaureate nursing programs. Attention to how programs are set up and function has relevance for theory and practice and enables improving frameworks for program planning. The study design embodied qualitative and quantitative elements and used six processes of socialization in organizations as a conceptual guide. Qualitative data collection concerned comparative case studies of three baccalaureate nursing programs and data analysis included narratives detailing program organization and describing student experience. Quantitative matter involved mailed questionnaires to determine graduates' bureaucratic, professional, and service role conceptions. Data analysis (analysis of variance) revealed statistically significant differences in role conceptions (F[3.56] = 4.51) of registered nurses graduating from different baccalaureate programs in nursing. Indications are that nursing programs can be set up to produce equal education and reach certain stated outcomes, yet implicit program processes can impact student learning. Copyright 2002, Elsevier Science (USA). All rights reserved.

  15. A Fully Automated Diabetes Prevention Program, Alive-PD: Program Design and Randomized Controlled Trial Protocol.

    Science.gov (United States)

    Block, Gladys; Azar, Kristen Mj; Block, Torin J; Romanelli, Robert J; Carpenter, Heather; Hopkins, Donald; Palaniappan, Latha; Block, Clifford H

    2015-01-21

    In the United States, 86 million adults have pre-diabetes. Evidence-based interventions that are both cost effective and widely scalable are needed to prevent diabetes. Our goal was to develop a fully automated diabetes prevention program and determine its effectiveness in a randomized controlled trial. Subjects with verified pre-diabetes were recruited to participate in a trial of the effectiveness of Alive-PD, a newly developed, 1-year, fully automated behavior change program delivered by email and Web. The program involves weekly tailored goal-setting, team-based and individual challenges, gamification, and other opportunities for interaction. An accompanying mobile phone app supports goal-setting and activity planning. For the trial, participants were randomized by computer algorithm to start the program immediately or after a 6-month delay. The primary outcome measures are change in HbA1c and fasting glucose from baseline to 6 months. The secondary outcome measures are change in HbA1c, glucose, lipids, body mass index (BMI), weight, waist circumference, and blood pressure at 3, 6, 9, and 12 months. Randomization and delivery of the intervention are independent of clinic staff, who are blinded to treatment assignment. Outcomes will be evaluated for the intention-to-treat and per-protocol populations. A total of 340 subjects with pre-diabetes were randomized to the intervention (n=164) or delayed-entry control group (n=176). Baseline characteristics were as follows: mean age 55 (SD 8.9); mean BMI 31.1 (SD 4.3); male 68.5%; mean fasting glucose 109.9 (SD 8.4) mg/dL; and mean HbA1c 5.6 (SD 0.3)%. Data collection and analysis are in progress. We hypothesize that participants in the intervention group will achieve statistically significant reductions in fasting glucose and HbA1c as compared to the control group at 6 months post baseline. The randomized trial will provide rigorous evidence regarding the efficacy of this Web- and Internet-based program in reducing or

  16. Teacher Educator Identity in a Culture of Iterative Teacher Education Program Design: A Collaborative Self-Study

    Science.gov (United States)

    Chang, Aurora; Rak Neugebauer, Sabina; Ellis, Aimee; Ensminger, David; Marie Ryan, Ann; Kennedy, Adam

    2016-01-01

    Faculty in the School of Education have collaborated to re-envision teacher education at our university. A complex, dynamic, time-consuming and sometimes painstaking process, redesigning a teacher education program from a traditional approach (i.e. where courses focus primarily on theoretical principles of practice through textbooks and…

  17. Vdebug: debugging tool for parallel scientific programs. Design report on vdebug

    International Nuclear Information System (INIS)

    Matsuda, Katsuyuki; Takemiya, Hiroshi

    2000-02-01

    We report on a debugging tool called vdebug which supports debugging work for parallel scientific simulation programs. It is difficult to debug scientific programs with an existing debugger, because the volume of data generated by the programs is too large for users to check data in characters. Usually, the existing debugger shows data values in characters. To alleviate it, we have developed vdebug which enables to check the validity of large amounts of data by showing these data values visually. Although targets of vdebug have been restricted to sequential programs, we have made it applicable to parallel programs by realizing the function of merging and visualizing data distributed on programs on each computer node. Now, vdebug works on seven kinds of parallel computers. In this report, we describe the design of vdebug. (author)

  18. Designing and implementing an undergraduate health administration program for nontraditional students.

    Science.gov (United States)

    Borkowski, Nancy; Gordon, Jean; Rushing, John

    2005-01-01

    This paper describes the development and implementation of an undergraduate health administration program for nontraditional students at a Hispanic serving institution. The program had to meet the needs of a diverse, adult student population, the local community, and the future leadership requirements of the healthcare industry. As such, the program was designed as a "bridge" for full-time employed healthcare licensed professionals seeking to complete a baccalaureate degree and obtain positions in the healthcare management field. It answered the call of the local community to strengthen partnerships between business and education by offering the program at healthcare employer worksites. Furthermore, the program addressed three needs of the healthcare industry: (1) the recognized shortage of future healthcare leaders, (2) the under-representation of minorities in the industry, and (3) proposed changes in health administration programs' curricula to focus on competencies in the areas of communication skills, decision making, ethical leadership, and self-development.

  19. Designing a Strategic Measurement Program for Software Engineering Organizations: Discovering Difficulties and Problems

    Directory of Open Access Journals (Sweden)

    Mitre-Hernández Hugo A.

    2014-04-01

    Full Text Available Software measurement is widely recognized as an essential part of understanding, controlling, monitoring, predicting, and evaluating software development and maintenance projects. Both, software process improvement (SPI and software measurement literature include many case studies of successful companies and descriptions of their measurement programs. However, there are still concerns on how to design efficient strategic measurement programs. These concerns include the lack of involvement of the SEO’s personnel, bad alignment with its strategy and improvement initiative, difficulty to justify the utility of using standards or improvement initiatives, etc. All of the former results in inadequate measurement programs that often lead to poor decisions and economic loss. This paper describes a pilot study to observe and analyze the operation of measurement teams when using measurement methods such as Balanced Objective-Quantifiers Method (BOQM, Practical Software Measurement (PSM and Balanced Scorecard and Goal-Driven Measurement (BSC&GQ[I]M to design a strategic measurement program. From the results of the study, we gained some insight on common difficulties and problems, which are useful to consider when designing of strategic measurement programs. This paper describes an important milestone in achieving our main research goal, evaluate and find suggestions to design a strategic measurement program aligned correctly with the strategic goals, for effective decision making at all organization levels and justify the utilities or benefits of integrating improvement initiatives.

  20. Investigation and Design of U-Frame Structures Using Program CUFRBC. Volume B. User’s Guide for Basins

    Science.gov (United States)

    1990-05-01

    directly by the program. Also, the special loads can be used to "correct" any loading that the program computes in a diffoerent manner than that normally ...basud on the proportional distribucion of potential maximum passive values, primarily for nonsymmetric loadings. 19 Hydraulic Loading 45. The hydraulic...for the wall b3 finding the hydraulic pressure at the middle of the element. The resultant hydraulic force acts normal to the wall, and the vertical and

  1. Supporting the whole student: Inclusive program design for making undergraduate research experiences accessible

    Science.gov (United States)

    Haacker-Santos, R.; Allen, L.; Batchelor, R. L.

    2013-12-01

    As undergraduate research experiences have become an unofficial pre-requisite to enter graduate school programs in the sciences, we have to make sure that these experiences are inclusive and accessible to all students. Program managers who make a conscious effort to recruit students from traditionally under-represented groups, including veterans, non-traditional students or students with disabilities, are often unaware of the financial and program implications these students require, and discover that their current program design might inadvertently exclude or not fully support these students. The SOARS Program, an undergraduate-to-graduate bridge program in the atmospheric sciences, has supported this group of students for over 15 years. We have found that we needed to adjust some program elements and secure extra funding sources to holistically support our students in their research experience, however, the program and the students have reaped tremendous benefits. Involving non-traditional students or veterans in our program has raised the maturity level and problem solving skills of the group, and having students with disabilities participate has been a vehicle for broadening perspective and diverse knowledge into the field of study, e.g. researching weather and climate beyond what you can 'see'. This presentation will highlight some of the findings from the SOARS program experience, and will share practices for recruitment and holistic support to ensure student success. We will share resources and tips on inclusive program design, including working with students with family commitments or physical disabilities, and will report on the enormous program benefits and peer learning these students have brought to the student cohorts and research labs they are working in.

  2. Nutritional needs assessment of rural agricultural migrants of southern Brazil: designing, implementing and evaluating a nutrition education program.

    Science.gov (United States)

    Desai, I D; Doell, A M; Officiati, S A; Bianco, A M; Van Severen, Y; Desai, M I; Jansen, E; de Oliveira, J E

    1990-01-01

    A nutritional needs assessment was conducted among rural agricultural migrant women (target group) and children (less than 5 years). The study was conducted in Vila Diogo, a slum located on the periphery of Nuporanga, a village in Sao Paulo state, Brazil. A nutrition education program was designed on the basis of evidence obtained from demographic/socioeconomic information of the study population and a nutritional needs assessment of women (target group) and children less than 5 years of age. The nutritional needs assessment consisted of anthropometry, dietary assessment, and nutrition knowledge, attitudes, and beliefs questionnaires. Formative and summative evaluation of the nutrition education program, using appropriately selected criteria and comparisons of nutrition knowledge scores before and after the program, were used to determine program effectiveness. Major findings of the study were: Diets of Vila Diogo residents were generally simplistic, consisting primarily of rice, beans, and coffee with sugar. Vila Diogo women appeared to be at a relatively high risk for vitamin A, iron, calcium, ascorbic, and riboflavin deficiencies, based on comparisons of 24-hour dietary intake data with FAO recommendations. Children (2-5 years) appeared at high risk for vitamin A, iron, and ascorbic acid deficiencies, based on comparisons of 24-hour dietary intake data with FAO recommendations. All children less than 5 years of age had been breast-fed at birth, but more than one half of children had been weaned by the third month. Infant feeding practices during fever and diarrhea were nutritionally detrimental. Women generally recognized a relationship between dietary intake during pregnancy and fetal nourishment. Using weight-for-height index, a significant number of women were probably undernourished; a small percentage of women, however, were overweight or obese. Although children less than 5 years of age did not generally appear malnourished, a relatively large number were

  3. An application of nonlinear programming to the design of regulators of a linear-quadratic formulation

    Science.gov (United States)

    Fleming, P.

    1983-01-01

    A design technique is proposed for linear regulators in which a feedback controller of fixed structure is chosen to minimize an integral quadratic objective function subject to the satisfaction of integral quadratic constraint functions. Application of a nonlinear programming algorithm to this mathematically tractable formulation results in an efficient and useful computer aided design tool. Particular attention is paid to computational efficiency and various recommendations are made. Two design examples illustrate the flexibility of the approach and highlight the special insight afforded to the designer. One concerns helicopter longitudinal dynamics and the other the flight dynamics of an aerodynamically unstable aircraft.

  4. Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles

    Science.gov (United States)

    Morelli, Eugene A.; Klein, Vladislav

    1990-01-01

    A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

  5. Large Advanced Space Systems (LASS) computer-aided design program additions

    Science.gov (United States)

    Farrell, C. E.

    1982-01-01

    The LSS preliminary and conceptual design requires extensive iteractive analysis because of the effects of structural, thermal, and control intercoupling. A computer aided design program that will permit integrating and interfacing of required large space system (LSS) analyses is discussed. The primary objective of this program is the implementation of modeling techniques and analysis algorithms that permit interactive design and tradeoff studies of LSS concepts. Eight software modules were added to the program. The existing rigid body controls module was modified to include solar pressure effects. The new model generator modules and appendage synthesizer module are integrated (interfaced) to permit interactive definition and generation of LSS concepts. The mass properties module permits interactive specification of discrete masses and their locations. The other modules permit interactive analysis of orbital transfer requirements, antenna primary beam n, and attitude control requirements.

  6. Quality assurance program requirements (design and construction). Task RS 002-5. Revision 3

    International Nuclear Information System (INIS)

    1985-08-01

    This regulatory guide describes a method acceptable to the NRC staff for complying with regard to establishing and implementing the requisite quality assurance program for the design and construction of nuclear power plants. Guidance for the establishment and execution of quality assurance programs during operation and decommissioning of nuclear power plants have been or will be addressed in separate regulatory guides. Similarly, quality assurance provisions concerning fuel cycle facilities have been or will be addressed in separate regulatory guides

  7. General design methodology applied to the research domain of physical programming for computer illiterate

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2011-09-01

    Full Text Available programs. We distilled this as being the challenge of enabling computer illiterates to program a computer without using a keyboard or mouse. If realised, such mechanisms will ?push the computer into the background? (Weiser, 1991:66 - 75) and allow... Systems. Available WWW: http://desrist.org/design-research-in-information-systems (accessed May 2011). Weiser, M. 1991. The computer for the 21st century. IEEE Pervasive computing: Mobile and ubiquitous systems, 66 - 75. The challenges...

  8. An analysis of program planning in schools with emerging excellence in science instructional design

    Science.gov (United States)

    Carroll, Karen Marie

    Science educators agree on many of the program elements that characterize exemplary science instructional programs, but it has not been clear how the processes of planning and implementation lead to excellence in program design. This study focuses on two K--12 school clusters located in unified school districts and one K--12 school cluster spanning two non-unified districts that are in the midst of building new science programs. The clusters were selected for support by an organization of educators, scientists, and businesspersons because they were recognized as likely to produce good programs. The investigation centers on three research questions: (1) To what extent have schools engaged in science education reform achieved excellence? (2) How did schools engaged in science program improvement go about achieving their goals, and (3) What contextual factors are most closely related to the realization of quality program elements? The degree to which each program studied met indicators of quality suggested by the National Science Education Standards (NSES) are described according to an Innovation Configuration (IC) Chart. Using a Stream Diagnostic method of analysis, levels of practice were associated with contextual factors categorized as Social, Organizing, and Resource. Findings reveal the importance of a balanced and synchronized function of all components, including administrative commitment, teacher participation, and favorable logistical aspects. Individual reform projects were more likely to be successful if they included exemplary program elements and mechanisms for program managers to access district personnel and procedures needed to implement programs. A review of the cluster case histories also revealed the positive impact of cooperation between the funding organization and the project, the degree to which professional development is directly related to the new program, and the availability of resources and support for each exemplary program element.

  9. Candu Energy's Aging and Obsolescence Program and its Application to Operating Facilities and New Plant Design

    International Nuclear Information System (INIS)

    Dam, R.; Gold, R.; McCrea, L.

    2012-01-01

    While plant aging is inevitable, predictable and 'graceful 'aging' behavior can be achieved through the implementation of a comprehensive and integrated Plant Life Management (PLiM) program. Despite organizations like the IAEA and INPO placing more emphasis on equipment reliability, there is still a lack of completely integrated programs in the industry as evidenced by: - Piece-meal, often crisis-driven, implementation comprising many different, partial solutions; - Duplication of effort often seen when different groups work in 'silos'. A strategy which fits with existing plant processes and programs, and which coordinates a broad range of equipment reliability activities is key to achieving the desired results. An example of such a program is the Aging and Obsolescence Program (AOP). AOP follows application of INPO AP-913 guidance for equipment reliability. The program is augmented to include single point vulnerability identification, unified approach to short and long lived components, risk management, spare parts management, and the identification and resolution of obsolescence issues. The systematic nature of the program provides the needed foundation to old and new stations alike. For existing operating stations some of the key uses include outage interval extension, reduced forced outages, and/or outage time reduction, any of which can translate into improving plant performance, competitiveness, and significant dollars saved. Program elements applied to new plant design are commensurate with the industry direction to 'design for reliability', and has allowed Candu Energy to learn and to improve upon what it can offer to operating stations. This paper intends to describe the basic elements of Candu Energy's Aging and Obsolescence Program and will share some of the experience having applied it to existing operating stations, consider applications to support expanding regulatory requirements, and describe the integration into the design of new plants, promoting

  10. Program Design Report of the CNC Machine Tool(V-1)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Moon, J. S.; Lee, I. B.; Youn, J. H.

    2010-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  11. [Design for constructability studies in support of the DOE ALWR (Advanced Light Water Reactor) Program

    International Nuclear Information System (INIS)

    1990-03-01

    An objective of this program was to influence two key areas: inputs to plant design that can enhance constructability; and improvements in the construction process. The investigations, workshops, meetings, and studies focused the program topics toward these areas. This document, Volume IV is Enchancing Constructability through design. The report is arranged to produce sections on major issues in each subject. At the end of each section are significant conclusions divided as: recommendations--conclusions worthy of acceptance; considerations--conclusions that were not universally accepted in the discussions but should be taken into account; and cautions--conclusions that should be evaluated to avoid past problems

  12. SYNCH: A program for design and analysis of synchrotrons and beamlines -- user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Garren, A.A.; Kenney, A.S.; Courant, E.D.; Russell, A.D.; Syphers, M.J.

    1993-12-31

    SYNCH is a computer program for use in the design and analysis of synchrotrons, storage rings, and beamlines. It has a large repertoire of commands that can be accessed in a flexible way. The input statements and the results of the calculations they invoke are saved in an internal database so that this information may be shared by other statements. SYNCH is the first accelerator program to organize its input in the form of a language. The statements, which resemble sentences, provide a natural way of describing lattices and invoking relevant calculations. The organization of the program is modular, so that it has been possible to expand its capabilities progressively.

  13. Massive parallel electromagnetic field simulation program JEMS-FDTD design and implementation on jasmin

    International Nuclear Information System (INIS)

    Li Hanyu; Zhou Haijing; Dong Zhiwei; Liao Cheng; Chang Lei; Cao Xiaolin; Xiao Li

    2010-01-01

    A large-scale parallel electromagnetic field simulation program JEMS-FDTD(J Electromagnetic Solver-Finite Difference Time Domain) is designed and implemented on JASMIN (J parallel Adaptive Structured Mesh applications INfrastructure). This program can simulate propagation, radiation, couple of electromagnetic field by solving Maxwell equations on structured mesh explicitly with FDTD method. JEMS-FDTD is able to simulate billion-mesh-scale problems on thousands of processors. In this article, the program is verified by simulating the radiation of an electric dipole. A beam waveguide is simulated to demonstrate the capability of large scale parallel computation. A parallel performance test indicates that a high parallel efficiency is obtained. (authors)

  14. Generic Mathematical Programming Formulation and Solution for Computer-Aided Molecular Design

    DEFF Research Database (Denmark)

    Zhang, Lei; Cignitti, Stefano; Gani, Rafiqul

    2015-01-01

    This short communication presents a generic mathematical programming formulation for Computer-Aided Molecular Design (CAMD). A given CAMD problem, based on target properties, is formulated as a Mixed Integer Linear/Non-Linear Program (MILP/MINLP). The mathematical programming model presented here......, which is formulated as an MILP/MINLP problem, considers first-order and second-order molecular groups for molecular structure representation and property estimation. It is shown that various CAMD problems can be formulated and solved through this model....

  15. Interactive program for analysis and design problems in advanced composites technology

    Science.gov (United States)

    Cruse, T. A.; Swedlow, J. L.

    1971-01-01

    During the past year an experimental program in the fracture of advanced fiber composites has been completed. The experimental program has given direction to additional experimental and theoretical work. A synthesis program for designing low weight multifastener joints in composites is proposed, based on extensive analytical background. A number of failed joints have been thoroughly analyzed to evaluate the failure hypothesis used in the synthesis procedure. Finally, a new solution is reported for isotropic and anisotropic laminates using the boundary-integral method. The solution method offers significant savings of computer core and time for important problems.

  16. Training of Ability for Engineering Design through Long Term Internship Program

    Science.gov (United States)

    Konishi, Masami; Gofuku, Akio; Tomita, Eiji

    The education program for engineering design capabilities through long term internship of Okayama University had started in 2006. The program supported by the MEXT is aimed to educate students in the Graduate School of Natural Science and Technology of Okayama University. The internship satellite laboratory of the University is settled in the near place of collaborative companies in which students are engaged with the project themes extracted from problems in the factory of collaborative companies. Through the program, promotion of abilities for setup and solving a problem considering cost and due date together with performance of the solution. Students are also expected to gain knowledge on patent and ethics required for skillful engineers.

  17. Distance education pedagogy and instructional design and development for occupational therapy educational programs.

    Science.gov (United States)

    Trujillo, Leonard G

    2007-01-01

    Distance education in occupational therapy programs is increasingly becoming an instructional norm. Technological advances and the common expected use of the Internet and its multiple options to communicate and share information have made its use also commonplace for occupational therapy educators. As with any instructional modality, Web-based instruction can offer a vibrant learning environment created through different teaching strategies, activities, and technologies. This article briefly outlines educational models and instructional designs that can be part of every occupational therapy program as they incorporate distance education and Web-based learning into their programs. The primary focus is on the incorporation of the constructivist approach.

  18. Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice in the U.S.

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-10-06

    In the U.S., the increasing financial support for customer-sited photovoltaic (PV) systems provided through publicly-funded incentive programs has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in addressing PV system performance. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address factors that affect performance, and describe key implementation details. Based on this review, we then offer recommendations for how PV incentive programs can be effectively designed to mitigate potential performance issues.

  19. Min-Max Design of FIR Digital Filters by Semidefinite Programming

    OpenAIRE

    Nagahara, Masaaki

    2013-01-01

    In this article we consider two problems: FIR (Finite Impulse Response) approximation of IIR (Infinite Impulse Response) filters and inverse FIR filtering of FIR or IIR filters. By means of Kalman-Yakubovich-Popov (KYP) lemma and its generalization (GKYP), the problems are reduced to semidefinite programming described in linear matrix inequalities (LMIs). MATLAB codes for these design methods are given. An design example shows the effectiveness of these methods.

  20. SOLCOST - Version 3. 0. Solar energy design program for non-thermal specialists

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    The SOLCOST solar energy design program is a public domain computerized design tool intended for use by non-thermal specialists to size solar systems with a methodology based on life cycle cost. An overview of SOLCOST capabilities and options is presented. A detailed guide to the SOLCOST input parameters is included. Sample problems showing typical imput decks and resulting SOLCOST output sheets are given. Details of different parts of the analysis are appended. (MHR)

  1. Mechanical design engineering. NASA/university advanced design program: Lunar Bulk Material Transport Vehicle

    Science.gov (United States)

    Daugherty, Paul; Griner, Stewart; Hendrix, Alan; Makarov, Chris; Martiny, Stephen; Meyhoefer, Douglas Ralph; Platt, Cody Claxton; Sivak, John; Wheeler, Elizabeth Fitch

    1988-01-01

    The design of a Lunar Bulk Material Transport Vehicle (LBMTV) is discussed. Goals set in the project include a payload of 50 cubic feet of lunar soil with a lunar of approximately 800 moon-pounds, a speed of 15 mph, and the ability to handle a grade of 20 percent. Thermal control, an articulated steering mechanism, a dump mechanism, a self-righting mechanism, viable power sources, and a probable control panel are analyzed. The thermal control system involves the use of small strip heaters to heat the housing of electronic equipment in the absence of sufficient solar radiation and multi-layer insulation during periods of intense solar radiation. The entire system uses only 10 W and weighs about 60 pounds, or 10 moon-pounds. The steering mechanism is an articulated steering joint at the center of the vehicle. It utilizes two actuators and yields a turning radius of 10.3 feet. The dump mechanism rotates the bulk material container through an angle of 100 degree using one actuator. The self-righting mechanism consists of two four bar linkages, each of which is powered by the same size actuator as the other linkages. The LBMTV is powered by rechargeable batteries. A running time of at least two hours is attained under a worst case analysis. The weight of the batteries is 100 pounds. A control panel consisting of feedback and control instruments is described. The panel includes all critical information necessary to control the vehicle remotely. The LBMTV is capable of handling many types of cargo. It is able to interface with many types of removable bulk material containers. These containers are made to interface with the three-legged walker, SKITTER. The overall vehicle is about 15 feet in length and has a weight of about 1000 pounds, or 170 lunar pounds.

  2. NDA PDP Program PuO2 increased particle size specification and design

    International Nuclear Information System (INIS)

    Marshall, R.S.; Taggart, D.P.; Becker, G.K.; Woon, W.Y.

    1996-01-01

    Provisions in the National TRU Program Quality Assurance Program Plan require an assessment of performance for nondestructive waste assay (NDA) systems employed in the program. This requirement is in part fulfilled through the use of Performance Demonstration programs. In order to optimize the quality and quantity of information acquired during a given Performance Demonstration Program cycle, the assessment employed is to be carefully specified and designed. The assessment must yield measurement system performance data meaningful with respect to NDA system capability to accommodate attributes of interest known to occur in actual waste forms. The design and specification of the increased particle size PuO 2 PDP working reference materials (WRMs) is directed at providing a straightforward mechanism to assess waste NDA system capability to account for biases introduced by large PuO 2 particles. The increased particle size PuO 2 PDP WRM design addresses actual waste form attributes associated with PuO 2 particle size and distributions thereof, the issue of a known and stable WRM configuration and equally important appropriate certification and tractability considerations

  3. Design, Development, and Maintenance of the GLOBE Program Website and Database

    Science.gov (United States)

    Brummer, Renate; Matsumoto, Clifford

    2004-01-01

    This is a 1-year (Fy 03) proposal to design and develop enhancements, implement improved efficiency and reliability, and provide responsive maintenance for the operational GLOBE (Global Learning and Observations to Benefit the Environment) Program website and database. This proposal is renewable, with a 5% annual inflation factor providing an approximate cost for the out years.

  4. Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.

    Energy Technology Data Exchange (ETDEWEB)

    Quarles, Stephen, L.; Sindelar, Melissa

    2011-12-13

    The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.

  5. Textile Design: A Suggested Program Guide. Fashion Industry Series No. 3.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The textile design guide is the third of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is conceived to provide youth and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific…

  6. Caring for All Students: Empathic Design as a Driver for Innovative School Library Services and Programs

    Science.gov (United States)

    Perrault, Anne Marie; Levesque, Aimee M.

    2012-01-01

    To understand and share the feelings of students one must see the world through their lens. Empathic design includes aspects of empathy and offers a means for a practical application of the concept by encouraging organizations to put themselves into the shoes or situation of their users so as to better understand users' needs. Program evaluation…

  7. Design and Impacts of a Youth-Directed Café Scientifique Program

    Science.gov (United States)

    Hall, Michelle K.; Foutz, Susan; Mayhew, Michael A.

    2013-01-01

    We have modified the popular Cafe Scientifique model for engaging adults in dialog on issues at the nexus of science and society to address the specific needs and interests of high-school age youth. Key elements of the model are Youth Leadership Teams that guide the program design and assist with implementation; a speaker preparation process to…

  8. Training Program Design. Interdisciplinary Team Training and Humanistic Patient Care for Hospices. Monograph 3.

    Science.gov (United States)

    English, David J.; Mortenson, Lee E.

    This monograph, the third in a series of five, provides training information for hospice staff in improving interdisciplinary team functions and humanistic care provisions. Its purpose is to describe the steps in designing a training program for a particular hospice and the activities undertaken between the selection of the trainers and the…

  9. Using Continuous Improvement in Online Program Design: DMAIC as a Tool for Assurance of Learning Assessments

    Science.gov (United States)

    Carnovale, Steven; Allen, Cliff; Pullman, Madeleine; Wong, Daniel

    2016-01-01

    The integration of technology into education has forced radical innovations to traditional instructional delivery models. Given its prevalence, a thorough understanding of pedagogical best practices associated with the design and implementation of such programs is critical. Furthermore, the need for an institutional commitment to assessment and a…

  10. Research-Informed Curriculum Design for a Master's-Level Program in Project Management

    Science.gov (United States)

    Bentley, Yongmei; Richardson, Diane; Duan, Yanqing; Philpott, Elly; Ong, Vincent; Owen, David

    2013-01-01

    This article reports on the application of Research-Informed Curriculum Design (RICD) for the development and implementation of an MSc Program in Project Management. The research focused on contemporary issues in project management and provided an analysis of project management approaches, tools, and techniques currently used in organizations.…

  11. The Impact of Programming Experience on Successfully Learning Systems Analysis and Design

    Science.gov (United States)

    Wong, Wang-chan

    2015-01-01

    In this paper, the author reports the results of an empirical study on the relationship between a student's programming experience and their success in a traditional Systems Analysis and Design (SA&D) class where technical skills such as dataflow analysis and entity relationship data modeling are covered. While it is possible to teach these…

  12. Quality Assurance for Postgraduate Programs: Design of a Model Applied on a University in Chile

    Science.gov (United States)

    Careaga Butter, Marcelo; Meyer Aguilera, Eduardo; Badilla Quintana, María Graciela; Jiménez Pérez, Laura; Sepúlveda Valenzuela, Eileen

    2017-01-01

    The quality of Education in Chile is a controversial topic that has been in the public debate in the last several years. To ensure quality in graduate programs, accreditation is compulsory. The current article presents a model to improve the process of self-regulation. The main objective was to design a Model of Quality Assurance for Postgraduate…

  13. Military Design Insights for Online Education Program Evaluation: A Revised Theoretical Construct

    Science.gov (United States)

    Culkin, David T.

    2017-01-01

    This theoretical development article examines how design methodology currently applied in United States military doctrine can offer insights into the increasingly complex arena of program evaluations of online modes for adult distance education. The article presents key themes that emerge from a multidisciplinary literature review. These themes…

  14. Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

    Science.gov (United States)

    Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

    2013-01-01

    The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

  15. Towards a Theory-Based Design Framework for an Effective E-Learning Computer Programming Course

    Science.gov (United States)

    McGowan, Ian S.

    2016-01-01

    Built on Dabbagh (2005), this paper presents a four component theory-based design framework for an e-learning session in introductory computer programming. The framework, driven by a body of exemplars component, emphasizes the transformative interaction between the knowledge building community (KBC) pedagogical model, a mixed instructional…

  16. 75 FR 24373 - Cotton Research and Promotion Program: Designation of Cotton-Producing States

    Science.gov (United States)

    2010-05-05

    ... 0581-AC84 Cotton Research and Promotion Program: Designation of Cotton- Producing States AGENCY... amending the Cotton Research and Promotion Order (Cotton Order) following a referendum held October 13... section 14202 of the Food, Conservation, and Energy Act of 2008 (2008 Farm Bill) that amended the Cotton...

  17. Design of device driver program for PCI data acquisition adapters based on WDM of windows 2000

    International Nuclear Information System (INIS)

    Yuan Weihua; Qiao Weimin; Jing Lan; Zhu Haijun

    2003-01-01

    The paper describes the design of device driver program for PCI data acquisition adapters based on WDM of Windows 2000. Give an actual example of PCI6208. Now, several data acquisition adapters based in this method are using in national big science engineer HIRFL-CSR. (authors)

  18. Program design by a multidisciplinary team. [for structural finite element analysis on STAR-100 computer

    Science.gov (United States)

    Voigt, S.

    1975-01-01

    The use of software engineering aids in the design of a structural finite-element analysis computer program for the STAR-100 computer is described. Nested functional diagrams to aid in communication among design team members were used, and a standardized specification format to describe modules designed by various members was adopted. This is a report of current work in which use of the functional diagrams provided continuity and helped resolve some of the problems arising in this long-running part-time project.

  19. Structure design of the Westinghouse superconducting magnet for the Large Coil Program

    International Nuclear Information System (INIS)

    Domeisen, F.N.; Hackworth, D.T.; Stuebinger, L.R.

    1978-01-01

    In the on-going development of superconducting toroidal field coils for tokamak reactors, the Large Coil Program (LCP) managed by Union Carbide Corporation will include the design, fabrication, and testing of large superconducting coils to determine their feasibility for use in the magnetic fusion energy effort. Structural analysis of the large coil is essential to ensure adequate safety in the test coil design and confidence in the scalability of the design. This paper will discuss the action of tensile and shear loads on the various materials used in the coil. These loads are of magnetic and thermal origin

  20. Feasibility study for objective oriented design of system thermal hydraulic analysis program

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

    2008-01-01

    The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. In this work, objective oriented program for system safety analysis code has been tried utilizing modernized C language. The analysis, design, implementation and verification steps for OOP system code development are described with some implementation examples. The system code SYSTF based on three-fluid thermal hydraulic solver has been developed by OOP design. The verifications of feasibility are performed with simple fundamental problems and plant models. (author)

  1. Distributed Solar Incentive Programs: Recent Experience and Best Practices for Design and Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Bird, L.; Reger, A.; Heeter, J.

    2012-12-01

    Based on lessons from recent program experience, this report explores best practices for designing and implementing incentives for small and mid-sized residential and commercial distributed solar energy projects. The findings of this paper are relevant to both new incentive programs as well as those undergoing modifications. The report covers factors to consider in setting and modifying incentive levels over time, differentiating incentives to encourage various market segments, administrative issues such as providing equitable access to incentives and customer protection. It also explores how incentive programs can be designed to respond to changing market conditions while attempting to provide a longer-term and stable environment for the solar industry. The findings are based on interviews with program administrators, regulators, and industry representatives as well as data from numerous incentive programs nationally, particularly the largest and longest-running programs. These best practices consider the perspectives of various stakeholders and the broad objectives of reducing solar costs, encouraging long-term market viability, minimizing ratepayer costs, and protecting consumers.

  2. User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 1: User's manual

    Science.gov (United States)

    Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

    1991-01-01

    The user's manual for the rocket combustor interactive design (ROCCID) computer program is presented. The program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial, and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can easily be added. The analysis model in ROCCID can account for the influence of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

  3. Engaging participants in design of a Native Hawaiian worksite wellness program.

    Science.gov (United States)

    Leslie, Jodi Haunani; Hughes, Claire Ku; Braun, Kathryn L

    2010-01-01

    Native Hawaiians today face a disproportionately high rate of obesity. The Designing Healthy Worksites (DHW) project investigated existing administrative policies and supports for healthy eating and physical activity at eight Native Hawaiian-serving organizations in Hawai'i, along with employee preferences for worksite wellness programming. We describe the process by which Native Hawaiian researchers and community members worked together to gather formative data to design future worksite wellness programs. A Native Hawaiian doctoral student (JHL) and a Native Hawaiian activist (CKH) spearheaded the project, mentored by a Caucasian professor (KLB) who has worked in Hawaii communities for 30 years. Advisors from the worksites supported the use of environmental assessments (n = 36), administrative interviews (n = 33), focus groups (n = 9), and an employee survey (n = 437) to collect data. We used an interactive process of data collection, sharing, and interpretation to assure mutual agreement on conclusions and future directions. Worksites were at different stages of readiness for worksite wellness programming, suggesting that a toolkit be developed from which agencies could create a program that fit. Activities preferred by large proportions of employees included support groups, experiential nutrition education (e.g., cooking demonstrations and field trips for smart food shopping), food buying clubs, and administrative policies supporting healthy lifestyles. High participation in data collection and interpretation suggest that our methods fostered enthusiasm for worksite wellness programming and for Native Hawaiians as researchers. The team continues to work together to develop and test interventions to promote worksite wellness. Native-directed research that engages administrators and employees in designing programs heightens program acceptability and applicability.

  4. Assessing urban runoff program progress through a dry weather hybrid reconnaissance monitoring design.

    Science.gov (United States)

    Bernstein, Brock; Moore, Bruce; Sharp, Grant; Smith, Robert

    2009-10-01

    Characterizing dry weather conditions in urban Municipal Separate Storm Sewer Systems (MS4s), and then prioritizing and addressing problems due to urban pollutants, is a daunting challenge. The size and complexity of most MS4s and the ephemeral nature of many dry weather problems hamper efforts to identify and eliminate pollutant sources, and to track trends in condition. As a result, assessing overall program progress has proven difficult. We describe a hybrid dry weather urban monitoring design from southern California that combines probabilistic and targeted sampling to rigorously identify and prioritize problems and track program progress. Data from probabilistic sites define the urban background and establish tolerance intervals, which identify sites that persistently exceed the overall urban background. Targeted sites focus on locations where nearby activities and/or past history suggest that pollutant levels will be elevated. Embedding targeted monitoring within a probabilistic design enables data from targeted sites to be interpreted in a more meaningful regional context. Data from all sites are also used to construct site- and pollutant-specific control charts. These charts quickly identify instances where a site's behavior significantly changes, compared to its past behavior, suggesting an active source in the upstream drainage area. The hybrid design, and the use of formal statistical tools (tolerance intervals and control charts), permit the program to systematically prioritize problematic sites, compare conditions to the regional urban background, and track trends over time. In addition, the program's design allows several measures of program progress to be defined and thus consistently followed over time. Such hybrid designs can provide substantial advantages compared to more traditional monitoring approaches.

  5. Development of a Wheelchair Skills Home Program for Older Adults Using a Participatory Action Design Approach

    Directory of Open Access Journals (Sweden)

    Edward M. Giesbrecht

    2014-01-01

    Full Text Available Restricted mobility is the most common impairment among older adults and a manual wheelchair is often prescribed to address these limitations. However, limited access to rehabilitation services results in older adults typically receiving little or no mobility training when they receive a wheelchair. As an alternative and novel approach, we developed a therapist-monitored wheelchair skills home training program delivered via a computer tablet. To optimize efficacy and adherence, principles of self-efficacy and adult learning theory were foundational in the program design. A participatory action design approach was used to engage older adult wheelchair users, care providers, and prescribing clinicians in an iterative design and development process. A series of prototypes were fabricated and revised, based on feedback from eight stakeholder focus groups, until a final version was ready for evaluation in a clinical trial. Stakeholder contributions affirmed and enhanced the foundational theoretical principles and provided validation of the final product for the target population.

  6. DESIGNING A SYLLABUS OF COLLABORATIVE ENGLISH TEACHING FOR PHYSICS STUDY PROGRAM

    Directory of Open Access Journals (Sweden)

    Esti Junining

    2015-11-01

    Full Text Available The recommended model of teaching English for students of non-English department is collaborative teaching which provides subject lecturer‘s involvement in the curriculum design. This paper reported the process of designing a syllabus of collaborative teaching for ESP teaching in Indonesian context. As a part of curriculum design, this ESP syllabus focuses on content area reading in the area of physics. Several text types commonly used in physics department and vocabulary building of academic word lists and the ones related to physics area study were elaborated as well. The paper concludes that the implementation of this program needs high commitment from the stakeholders in order to make the program successfully implemented.

  7. Results of Education Program of “Training of Designers for Town Renovation”

    Science.gov (United States)

    Nitta, Yasutsugu; Inoi, Hiroto

    The paper introduces the outline and results of the education program of “Training of designers for town renovation”, which has been done for two years in Osaka University, sponsored by the Ministry of education, culture, sports, science and technology. The program has three main aims as follows ; to understand three factors of town planning, “Shape”, “System” and “Mind” and master the design skills for realizing three factors, to master the design skills integrating three factors which are “Environment”, “Social” and “Economic”, and to perceive various people living, improve the ability of communicating and enhance the desire of participating town planning process.

  8. An object-oriented class design for the generalized finite element method programming

    Directory of Open Access Journals (Sweden)

    Dorival Piedade Neto

    Full Text Available The Generalized Finite Element Method (GFEM is a numerical method based on the Finite Element Method (FEM, presenting as its main feature the possibility of improving the solution by means of local enrichment functions. In spite of its advantages, the method demands a complex data structure, which can be especially benefited by the Object-Oriented Programming (OOP. Even though the OOP for the traditional FEM has been extensively described in the technical literature, specific design issues related to the GFEM are yet little discussed and not clearly defined. In the present article it is described an Object-Oriented (OO class design for the GFEM, aiming to achieve a computational code that presents a flexible class structure, circumventing the difficulties associated to the method characteristics. The proposed design is evaluated by means of some numerical examples, computed using a code implemented in Python programming language.

  9. AGS - The ISR computer program for synchrotron design, orbit analysis and insertion matching

    International Nuclear Information System (INIS)

    Keil, E.; Marti, Y.; Montague, B.W.; Sudboe, A.

    1975-01-01

    This is a detailed guide to the use of the current version of a FORTRAN program for carrying out computations required in the design or modification of alternating-gradient synchrotrons and storage rings. The program, which runs on the CDC 7600 computer at CERN, computes linear transformation functions, and modifications of parameters to achieve specified properties; it tracks sets of particle trajectories, finds closed orbits when elements of the structure are displaced, computes the equilibrium orbit, designs closed-orbit bumps, tracks betatron functions through the structure, and matches insertions in the structure to specified betatron and dispersion functions. The report supersedes CERN 69-5 (AGS - The ISR computer system for synchrotron design and orbit analysis, by E. Keil and P. Strolin). (Author)

  10. Strength Evaluation of a Preliminary Hot Gas Duct Design for the NHDD Program

    International Nuclear Information System (INIS)

    Song, Keenam; Kim, Y. W; Lee, S. B.

    2007-01-01

    Very High Temperature Gas Cooled Reactor (VHTR) has been selected as a high energy heat source for a nuclear hydrogen generation. The VHTR can produce hydrogen from heat and water by using a thermo-chemical process or from heat, water, and natural gas by steam reformer technology. The NHDD program being researched at KAERI is planning to produce hydrogen by using nuclear energy and a thermo-chemical process. Helium gas is the choice for the coolant of the NHDD program since it is an inert gas, with no affinity to a chemical or nuclear activity, therefore a radioactivity transport in the primary circuit of the NHDD program is minimal under a normal operation. Moreover, its gaseous nature avoids problems related to a phase change and water-metal reactions and therefore improves its safety. In this study, a strength evaluation for the HGD of the NHDD program has been undertaken based on the HTR- 10 design concepts

  11. Design of Standards and Labeling programs in Chile: Techno-Economic Analysis for Refrigerators

    Energy Technology Data Exchange (ETDEWEB)

    Letschert, Virginie E. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; McNeil, Michael A. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; Pavon, Mariana [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.; Lutz, Wolfgang F. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division.

    2013-05-01

    Lawrence Berkeley National Laboratory is a global leader in the study of energy efficiency and its effective implementation through government policy. The Energy Analysis and Environmental Impacts Department of LBNL’s Environmental Energy Technologies Division provides technical assistance to help federal, stat e and local government agencies in the United States, and throughout the world, develop long-term strategies, policy, and programs to encourage energy efficiency in all sectors and industries. In the past, LBNL has assisted staff of various countries government agencies and their con tractors in providing methodologies to analyze cost-effectiveness of regulations and asses s overall national impacts of efficiency programs. The paper presents the work done in collaboration with the Ministry of Energy (MoE) in Chile and the Collaborative Labeling Appliance Standards Programs (CLASP) on designing a Minimum Energy Performance Standards (MEPS) and ext ending the current labeling program for refrigerators.

  12. Indigenous health program evaluation design and methods in Australia: a systematic review of the evidence.

    Science.gov (United States)

    Lokuge, Kamalini; Thurber, Katherine; Calabria, Bianca; Davis, Meg; McMahon, Kathryn; Sartor, Lauren; Lovett, Raymond; Guthrie, Jill; Banks, Emily

    2017-10-01

    Indigenous Australians experience a disproportionately higher burden of disease compared to non-Indigenous Australians. High-quality evaluation of Indigenous health programs is required to inform health and health services improvement. We aimed to quantify methodological and other characteristics of Australian Indigenous health program evaluations published in the peer-reviewed literature. Systematic review of peer-reviewed literature (November 2009-2014) on Indigenous health program evaluation. We identified 118 papers describing evaluations of 109 interventions; 72.0% were university/research institution-led. 82.2% of evaluations included a quantitative component; 49.2% utilised quantitative data only and 33.1% used both quantitative and qualitative data. The most common design was a before/after comparison (30.5%, n=36/118). 7.6% of studies (n=9/118) used an experimental design: six individual-level and three cluster-randomised controlled trials. 56.8% (67/118) reported on service delivery/process outcomes (versus health or health risk factor outcomes) only. Given the number of Indigenous health programs that are implemented, few evaluations overall are published in the peer-reviewed literature and, of these, few use optimal methodologies such as mixed methods and experimental design. Implications for public health: Multiple strategies are required to increase high-quality, accessible evaluation in Indigenous health, including supporting stronger research-policy-practice partnerships and capacity building for evaluation by health services and government. © 2017 The Authors.

  13. Model design for Large-Scale Seismic Test Program at Hualien, Taiwan

    International Nuclear Information System (INIS)

    Tang, H.T.; Graves, H.L.; Chen, P.C.

    1991-01-01

    The Large-Scale Seismic Test (LSST) Program at Hualien, Taiwan, is a follow-on to the soil-structure interaction (SSI) experiments at Lotung, Taiwan. The planned SSI studies will be performed at a stiff soil site in Hualien, Taiwan, that historically has had slightly more destructive earthquakes in the past than Lotung. The LSST is a joint effort among many interested parties. Electric Power Research Institute (EPRI) and Taipower are the organizers of the program and have the lead in planning and managing the program. Other organizations participating in the LSST program are US Nuclear Regulatory Commission (NRC), the Central Research Institute of Electric Power Industry (CRIEPI), the Tokyo Electric Power Company (TEPCO), the Commissariat A L'Energie Atomique (CEA), Electricite de France (EdF) and Framatome. The LSST was initiated in January 1990, and is envisioned to be five years in duration. Based on the assumption of stiff soil and confirmed by soil boring and geophysical results the test model was designed to provide data needed for SSI studies covering: free-field input, nonlinear soil response, non-rigid body SSI, torsional response, kinematic interaction, spatial incoherency and other effects. Taipower had the lead in design of the test model and received significant input from other LSST members. Questions raised by LSST members were on embedment effects, model stiffness, base shear, and openings for equipment. This paper describes progress in site preparation, design and construction of the model and development of an instrumentation plan

  14. Next generation safeguards initiative (NGSI) program plan for safeguards by design

    Energy Technology Data Exchange (ETDEWEB)

    Demuth, Scott F [Los Alamos National Laboratory; Budlong - Sylvester, Kory [Los Alamos National Laboratory; Lockwood, Dunbar [DOE/NA-243

    2010-01-01

    Safeguards by Design (SBD) is defined as the incorporation of safeguards features early in the design phase of a new nuclear facility in order to avoid the need to redesign the facility at a later date, or retrofit the completed facility. Not only can SBD avoid the need for redesign or retrofit, but consideration of safeguards features early in the facility design effort can provide for a more efficient and effective safeguards design. A program has been initiated by the United States Department of Energy during the past several years to develop, demonstrate and institutionalization SBD. This plan has been developed in parallel with a similar effort at the IAEA while taking into account their achievements and future plans. The United States SBD program is focused on (1) identification of best practices that satisfy existing safeguards requirements, (2) identification of advanced concepts where best practices can be improved, and (3) institutionalizing SBD by gaining its acceptance as a global norm for the design of new nuclear facilities. SBD guidance documents are being prepared as an aid to industry for their design activities, to describe the relationship between requirements, best practices, and advanced concepts. SBD 'lessons learned' studies have been conducted to help identify the existing best practices and potential areas for improvement. Finally, acceptance as a global norm is being pursued by way of international workshops, engagement with industry and the IAEA, and setting an example by way of its use in new nuclear facilities in the United States.

  15. Playable stories: Making programming and 3D role-playing game design personally and socially relevant

    Science.gov (United States)

    Ingram-Goble, Adam

    This is an exploratory design study of a novel system for learning programming and 3D role-playing game design as tools for social change. This study was conducted at two sites. Participants in the study were ages 9-14 and worked for up to 15 hours with the platform to learn how to program and design video games with personally or socially relevant narratives. This first study was successful in that students learned to program a narrative game, and they viewed the social problem framing for the practices as an interesting aspect of the experience. The second study provided illustrative examples of how providing less general structure up-front, afforded players the opportunity to produce the necessary structures as needed for their particular design, and therefore had a richer understanding of what those structures represented. This study demonstrates that not only were participants able to use computational thinking skills such as Boolean and conditional logic, planning, modeling, abstraction, and encapsulation, they were able to bridge these skills to social domains they cared about. In particular, participants created stories about socially relevant topics without to explicit pushes by the instructors. The findings also suggest that the rapid uptake, and successful creation of personally and socially relevant narratives may have been facilitated by close alignment between the conceptual tools represented in the platform, and the domain of 3D role-playing games.

  16. Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for designing a surveillance program for monitoring the radiation-induced changes in the mechanical properties of ferritic materials in light-water moderated nuclear power reactor vessels. This practice includes the minimum requirements for the design of a surveillance program, selection of vessel material to be included, and the initial schedule for evaluation of materials. 1.2 This practice was developed for all light-water moderated nuclear power reactor vessels for which the predicted maximum fast neutron fluence (E > 1 MeV) at the end of license (EOL) exceeds 1 × 1021 neutrons/m2 (1 × 1017 n/cm2) at the inside surface of the reactor vessel. 1.3 This practice applies only to the planning and design of surveillance programs for reactor vessels designed and built after the effective date of this practice. Previous versions of Practice E185 apply to earlier reactor vessels. 1.4 This practice does not provide specific procedures for monitoring the radiation induced cha...

  17. The development and characterization of a primarily mineral calcium phosphate - poly(epsilon-caprolactone) biocomposite

    Science.gov (United States)

    Dunkley, Ian Robert

    Orthopaedic reconstruction often involves the surgical introduction of structural implants that provide for rigid fixation, skeletal stabilization, and bone integration. The high stresses incurred by these implanted devices have historically limited material choices to metallic and select polymeric formulations. While mechanical requirements are achieved, these non-degradable materials do not participate actively in the remodeling of the skeleton and present the possibility of long-term failure or rejection. This is particularly relevant in cervical fusion, an orthopaedic procedure to treat damaged, degenerative or diseased intervertebral discs. A significant improvement on the available synthetic bone replacement/regeneration options for implants to treat these conditions in the cervical spine may be achieved with the development of primarily mineral biocomposites comprised of a bioactive ceramic matrix reinforced with a biodegradable polymer. Such a biocomposite may be engineered to possess the clinically required mechanical properties of a particular application, while maintaining the ability to be remodeled completely by the body. A biocomposite of Si-doped calcium phosphate (Si-CaP) and poly(epsilon-caprolactone) (PCL) was developed for application as such a synthetic bone material for potential use as a fusion device in the cervical spine. In this thesis, a method by which high mineral content Si-CaP/PCL biocomposites with interpenetrating matrices of mineral and polymer phases may be prepared will be demonstrated, in addition to the effects of the various preparation parameters on the biocomposite density, porosity and mechanical properties. This new technique by which dense, primarily ceramic Si-CaP/PCL biocomposites were prepared, allowed for the incorporation of mineral contents ranging between 45-97vol%. Polymer infiltration, accomplished solely by passive capillary uptake over several days, was found to be capable of fully infiltrating the microporosity

  18. Curriculum design and German student exchange for Sino-German Bachelor program majored in optoelectronics engineering

    Science.gov (United States)

    Zheng, Jihong; Fuhrmann, Thomas; Xu, Boqing; Schreiner, Rupert; Jia, Hongzhi; Zhang, Wei; Wang, Ning; Seebauer, Gudrun; Zhu, Jiyan

    2017-08-01

    Different higher education backgrounds in China and Germany led to challenges in the curriculum design at the beginning of our cooperative bachelor program in Optoelectronics Engineering. We see challenges in different subject requirements from both sides and in the German language requirements for Chinese students. The curriculum was optimized according to the ASIIN criteria, which makes it acceptable and understandable by both countries. German students are integrated into the Chinese class and get the same lectures like their Chinese colleagues. Intercultural and curriculum challenges are successfully solved. The results are summarized to provide an example for other similar international programs.

  19. Adapted design of multimedia-facilitated language learning program for children with autism

    Directory of Open Access Journals (Sweden)

    Fai-Kim Lau

    Full Text Available The aim of this pilot study is to help researchers construct an appropriate multimedia-supported learning program for students who have autism. The results of this pilot study assisted the multimedia learn program designers to pay attention to the need of the development of a clear and simple layout, multiple level of content presentation, and simple but direct audio instructions. The core conclusion is the significance of the need for caring individual differences of these students during the learn process.

  20. Emergency Response Program Designing Based On Case Study ERP Regulations In Ilam Gas Refinery

    Directory of Open Access Journals (Sweden)

    Mehdi Tahmasbi

    2015-08-01

    Full Text Available The study of Emergency response plan designing is one of the most important prevention approaches in crisis management. This study aims to design emergency response plan based on case study ERP regulations in Ilam gas refinery. On the basis of risk assessment and identification techniques such as HAZOP and FMEA in Ilam gas refinery the risks have been prioritized and then according to this prioritization the design of possible scenarios which have the highest rate of occurrence and the highest level of damage has been separated. Possible scenarios were simulated with PHAST software. Then emergency response program has been designed for the special mode or similar cases. According to the internal emergency response plan for Ilam gas refinery and predictable conditions of the process special instructions should be considered at the time of the incident to suffer the least damage on people and environment in the shortest time possible.

  1. Summary of the control-drive-mechanism design and performance for LWBR (LWBR Development Program)

    International Nuclear Information System (INIS)

    Yarnall, F.

    1983-01-01

    Control Drive Mechanisms (CDM) are used in the Light Water Breeder reactor to position Movable Fuel Assemblies weighing in excess of one ton each for purposes of reactivity control. These mechanisms are the first of a kind designed for loads of that magnitude. This report presents a summary of the design and performance of the CDM and includes discussions of the principles of operation, unique design features, and fabrication methods of this large, high load capacity CDM. The extensive design acceptance test program and the Shippingport plant periodic testing are summrized as are lessons learned during assembly of the CDM's to the reactor. These CDM's operated successfully to control the light water breeder core at the Shippingport Station from initial criticality in August 1977 to the final shutdown in October 1982. All test and operative data were within expected bands

  2. Designing and implementing a physiology course for a new doctoral occupational therapy program with student feedback.

    Science.gov (United States)

    Goodman, Barbara E; Ikiugu, Moses N

    2017-09-01

    Recently, the Occupational Therapy Department requested a custom-designed medical physiology course for the students in the new occupational therapy doctoral program. The first author, a physiologist with extensive experience in teaching both undergraduate preprofessional and medical students in human physiology, was recruited to design and implement the course. The course was designed to be consistent with the constructivist philosophy that guides the occupational therapy curriculum. The course was offered for the first time during fall/spring 2015/2016 and included both first- and second-year occupational therapy doctoral students. A number of anonymous assessment tools were used to evaluate students' perceptions regarding the effectiveness of various pedagogies used in the course in enhancing their learning. A summative course assessment survey with comments was used at the end of the course. This paper describes the model of course design and the student feedback, which generated some suggestions for improvement of the course. This approach in designing a new course for a new disciplinary group of students should be helpful to other faculty involved in developing courses for health career programs populated by students with variable physiology backgrounds and different educational needs. The final relevant feedback from the course would be to have the students evaluate the usefulness of the course to their future careers immediately following their certification examinations in a year or two and during their subsequent clinical experiences; however, that information will likely be more difficult to obtain. Copyright © 2017 the American Physiological Society.

  3. Ultimate limit state design of sheet pile walls by finite elements and nonlinear programming

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Damkilde, Lars; Krabbenhøft, Sven

    2005-01-01

    The design of sheet pile walls by lower bound limit analysis is considered. The design problem involves the determination of the necessary yield moment of the wall, the wall depth and the anchor force such that the structure is able to sustain the given loads. This problem is formulated...... as a nonlinear programming problem where the yield moment of the wall is minimized subject to equilibrium and yield conditions. The finite element discretization used enables exact fulfillment of these conditions and thus, according to the lower bound theorem, the solutions are safe....

  4. Ultimate Limit State Design Of Sheet Pile Walls By Finite Elements And Nonlinear Programming

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Damkilde, Lars; Krabbenhøft, Sven

    2005-01-01

    The design of sheet pile walls by lower bound limit analysis is considered. The design problem involves the determination of the necessary yield moment of the wall, the wall depth and the anchor force such that the structure is able to sustain the given loads. This problem is formulated...... as a nonlinear programming problem where the yield moment of the wall is minimized subject to equilibrium and yield conditions. The finite element discretization used enables exact fulfillment of these conditions and thus, according to the lower bound theorem, the solutions are safe...

  5. Further Developments on Optimum Structural Design Using MSC/Nastran and Sequential Quadratic Programming

    DEFF Research Database (Denmark)

    Holzleitner, Ludwig

    1996-01-01

    , here the shape of two dimensional parts with different thickness areas will be optimized. As in the previos paper, a methodology for structural optimization using the commercial finite element package MSC/NASTRAN for structural analysis is described. Three different methods for design sensitivity......This work is closely connected to the paper: K.G. MAHMOUD, H.W. ENGL and HOLZLEITNER: "OPTIMUM STRUCTURAL DESIGN USING MSC/NASTRAN AND SEQUENTIAL QUADRATIC PROGRAMMING", Computers & Structures, Vol. 52, No. 3, pp. 437-447, (1994). In contrast to that paper, where thickness optimization is described...

  6. SLS-SPEC-159 Cross-Program Design Specification for Natural Environments (DSNE) Revision D

    Science.gov (United States)

    Roberts, Barry C.

    2015-01-01

    This document is derived from the former National Aeronautics and Space Administration (NASA) Constellation Program (CxP) document CxP 70023, titled "The Design Specification for Natural Environments (DSNE), Revision C." The original document has been modified to represent updated Design Reference Missions (DRMs) for the NASA Exploration Systems Development (ESD) Programs. The DSNE completes environment-related specifications for architecture, system-level, and lower-tier documents by specifying the ranges of environmental conditions that must be accounted for by NASA ESD Programs. To assure clarity and consistency, and to prevent requirements documents from becoming cluttered with extensive amounts of technical material, natural environment specifications have been compiled into this document. The intent is to keep a unified specification for natural environments that each Program calls out for appropriate application. This document defines the natural environments parameter limits (maximum and minimum values, energy spectra, or precise model inputs, assumptions, model options, etc.), for all ESD Programs. These environments are developed by the NASA Marshall Space Flight Center (MSFC) Natural Environments Branch (MSFC organization code: EV44). Many of the parameter limits are based on experience with previous programs, such as the Space Shuttle Program. The parameter limits contain no margin and are meant to be evaluated individually to ensure they are reasonable (i.e., do not apply unrealistic extreme-on-extreme conditions). The natural environments specifications in this document should be accounted for by robust design of the flight vehicle and support systems. However, it is understood that in some cases the Programs will find it more effective to account for portions of the environment ranges by operational mitigation or acceptance of risk in accordance with an appropriate program risk management plan and/or hazard analysis process. The DSNE is not intended

  7. Building a Team of Teachers for Designing and Implementation of Modul Educational Programs

    Directory of Open Access Journals (Sweden)

    Kashtanova S.N.

    2015-11-01

    Full Text Available This article can be classified as thematic review, since it shows the actual experience of a human resources choice for the design and implementation of modular educational programs. It illustrates the main issues and initiative solutions to the team strategies modeling in a modernization of pedagogical education in Russia. We presents the basic ideological orientations of the modern university teacher from the point of view of reflective pedagogy and pedagogical management. We analyzed the experience of studying the teachers’ readiness to innovative activity and gave examples of dealing with the expectations and needs of potential employers and consumers of educational products using the foresight studies. A model of a graduate and the role of the teacher were analyzed based on expert panels method. Functional mechanisms, and technical aspects of teacher performance, designing and implementing modular educational programs were described with the projection of properties and qualities of the educational product on the professional and personal characteristics of the teacher.

  8. Design of exploration and minerals-data-collection programs in developing areas

    Science.gov (United States)

    Attanasi, E.D.

    1981-01-01

    This paper considers the practical problem of applying economic analysis to designing minerals exploration and data collection strategies for developing countries. Formal decision rules for the design of government exploration and minerals-data-collection programs are derived by using a minerals-industry planning model that has been extended to include an exploration function. Rules derived are applicable to centrally planned minerals industries as well as market-oriented minerals sectors. They pertain to the spatial allocation of exploration effort and to the allocation of activities between government and private concerns for market-oriented economies. Programs characterized by uniform expenditures, uniform information coverage across regions, or uniform-density grid drilling progrmas are shown to be inferior to the strategy derived. Moreover, for market-oriented economies, the economically optimal mix in exploration activities between private and government data collection would require that only private firms assess local sites and that government agencies carry out regional surveys. ?? 1981.

  9. Automatic Design of Robust Optimal Controller for Interval Plants Using Genetic Programming and Kharitonov Theorem

    Directory of Open Access Journals (Sweden)

    Peng Chen

    2011-10-01

    Full Text Available This paper presents a novel approach to automatic design of a robust optimal controller for interval plants with Genetic Programming based on Kharitonov Theorem (KT, which provides a theoretical foundation in the design of robust controller for interval plants. The structure and parameters of the robust optimal controller for interval plants are optimized by Genetic Programming and the Generalized KT related stability criteria are integrated into the solution to guarantee the stability of the closed-loop system. Consequently, the evolved controller not only minimizes time-weighted absolute error (ITAE of the closed-loop system, but also stabilizes the whole interval plant family robustly. Finally, the simulations on a benchmark problem show that the proposed method can effectively generate a robust optimal controller for interval plants.

  10. Advanced turbine systems program conceptual design and product development. Annual report, August 1993--July 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-01

    This Yearly Technical Progress Report covers the period August 3, 1993 through July 31, 1994 for Phase 2 of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC421-93MC30246. As allowed by the Contract (Part 3, Section J, Attachment B) this report is also intended to fulfill the requirements for a fourth quarterly report. The objective of Phase 2 of the ATS Program is to provide the conceptual design and product development plan for an ultra-high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized in the year 2000. During the period covered by this report, Solar has completed three of eight program tasks and has submitted topical reports. These three tasks included a Project Plan submission of information required by NEPA, and the selection of a Gas-Fueled Advanced Turbine System (GFATS). In the latest of the three tasks, Solar`s Engineering team identified an intercooled and recuperated (ICR) gas turbine as the eventual outcome of DOE`s ATS program coupled with Solar`s internal New Product Introduction (NPI) program. This machine, designated ``ATS50`` will operate at a thermal efficiency (turbine shaft power/fuel LHV) of 50 percent, will emit less than 10 parts per million of NOx and will reduce the cost of electricity by 10 percent. It will also demonstrate levels of reliability, availability, maintainability, and durability (RAMD) equal to or better than those of today`s gas turbine systems. Current activity is concentrated in three of the remaining five tasks a Market Study, GFATS System Definition and Analysis, and the Design and Test of Critical Components.

  11. [Cost-benefit analysis of a population-based cervical cancer screening program designed for Cantabria].

    Science.gov (United States)

    Ramos-Barrón, M Á; Vázquez-Rodríguez, J A; García-Garrido, A B

    2014-09-01

    Cervical cancer is the second most common cancer worldwide in women, with an annual mortality of 3.6 per 100.000 women in Spain. An opportunistic screening protocol is currently being developed in Cantabria. The objective of the study is to propose a population-based screening program in Cantabria and assess its cost-benefits. The population-based program design has been carried out according to the description of the natural course of cervical cancer and its incidence and mortality in Cantabria during 2000-2009. There have been some proposals to increase participation in the program and to evaluate its quality. Costs and benefits (direct and indirect) have been analyzed in several scenarios by modifying the frequency of tests (3-5 years), the age at which the program can be accessed (21, 25 or 30 years), the coverage of the program (60-80%), and discount rates (0-3-6%). A program carried out with coverage of 80% and tests performed every 3 years generates annual costs of €893.000 (discount rate of 3%) compared to the current opportunistic protocol. Scenarios with tests performed every 5 years generate an annual benefit higher than €618.000, depending on the age of accessing the program. Scenarios with coverage lower than 60% or with women over 30 years old having access to the program are not of interest because of the lower health benefits. However, performing tests every 5 years is more economically advantageous than every 3 years, with similar health benefits. Copyright © 2013 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España. All rights reserved.

  12. Substation design improvement with a probabilistic reliability approach using the TOPASE program

    Energy Technology Data Exchange (ETDEWEB)

    Bulot, M.; Heroin, G.; Bergerot, J-L.; Le Du, M. [Electricite de France (France)

    1997-12-31

    TOPASE, (the French acronym for Probabilistic Tools and Data Processing for the Analysis of Electric Systems), developed by Electricite de France (EDF) to perform reliability studies on transmission substations, was described. TOPASE serves a dual objective of assisting in the automation of HV substation studies, as well as enabling electrical systems experts who are not necessarily specialists in reliability studies to perform such studies. The program is capable of quantifying the occurrence rate of undesirable events and of identifying critical equipment and the main incident scenarios. The program can be used to improve an existing substation, to choose an HV structure during the design stage, or to choose a system of protective devices. Data collected during 1996 and 1997 will be analyzed to identify useful experiences and to validate the basic concepts of the program. 4 figs.

  13. Design and application of quick computation program on fractal dimension of land-use types

    Science.gov (United States)

    Mei, Xin; Wang, Quanfang; Wang, Qian; Liu, Junyi

    2009-07-01

    Now the fractal dimension of Land Use Types is often calculated by using raster data as the raw data, but quite a number of spatial data is stored as vector data in fact. If these data are converted to images to calculate fractal dimension, perhaps some pixels with inaccurate grey value will result from the "GRID" structure of raster data. And the precision of fractal dimension calculated on raster Data is closely related to the size of pixel and Grid image.In view of this, In this paper, a computation program of the fractal dimension for 2D vector data based on Windows platform has been designed by using Visual Csharp. This program has been successfully applied to land-use data of the middle Qinling Mountains and the southeast of Hubei Province in China.in the 1990s. The results show that the program is a convenient, reliable and precise method of fractal dimension for 2D Vector Data.

  14. Adopting an Evidence-Based Lifestyle Physical Activity Program: Dissemination Study Design and Methods.

    Science.gov (United States)

    Dunn, Andrea L; Buller, David B; Dearing, James W; Cutter, Gary; Guerra, Michele; Wilcox, Sara; Bettinghaus, Erwin P

    2012-06-01

    BACKGROUND: There is a scarcity of research studies that have examined academic-commercial partnerships to disseminate evidence-based physical activity programs. Understanding this approach to dissemination is essential because academic-commercial partnerships are increasingly common. Private companies have used dissemination channels and strategies to a degree that academicians have not, and declining resources require academicians to explore these partnerships. PURPOSE: This paper describes a retrospective case-control study design including the methods, demographics, organizational decision-making, implementation rates, and marketing strategy for Active Living Every Day (ALED), an evidence-based lifestyle physical activity program that has been commercially available since 2001. Evidence-based public health promotion programs rely on organizations and targeted sectors to disseminate these programs although relatively little is known about organizational-level and sector-level influences that lead to their adoption and implementation. METHODS: Cases (n=154) were eligible if they had signed an ALED license agreement with Human Kinetics (HK), publisher of the program's textbooks and facilitator manuals, between 2001 and 2008. Two types of controls were matched (2:2:1) and stratified by sector and region. Active controls (Control 1; n=319) were organizations that contacted HK to consider adopting ALED. Passive controls (Control 2; n=328) were organizations that received unsolicited marketing materials and did not initiate contact with HK. We used Diffusion of Innovations Theory (DIT) constructs as the basis for developing the survey of cases and controls. RESULTS: Using the multi-method strategy recommended by Dillman, a total of n=801 cases and controls were surveyed. Most organizations were from the fitness sector followed by medical, nongovernmental, governmental, educational, worksite and other sectors with significantly higher response rates from government

  15. Investigating the key factors in designing a communication skills program for medical students: A qualitative study

    Science.gov (United States)

    Mahdi Hazavehei, Seyyed M.; Moonaghi, Hossein Karimi; Moeini, Babak; Moghimbeigi, Abbas; Emadzadeh, Ali

    2015-01-01

    Introduction Medical students have a serious need to acquire communication skills with others. In many medical schools, special curriculums are developed to improve such skills. Effective training of communication skills requires expert curriculum design. The aim of this study was to explore the experiences and views of experts and stakeholders in order to design a suitable training program in communication skills for medical students. Methods The content analysis approach was used in this qualitative study. Forty-three participants were selected from the faculty, nurses, physicians, residents, and medical students at Mashhad University of Medical Sciences using purposive sampling. The data were collected through focus group discussions and semi-structured interviews. To ensure the accuracy of the data, the criteria of credibility, transferability, dependability, and conformability were met. The data were analyzed by MAXQDA software using the Graneheim & Lundman model. Results The findings of this study consisted of two main themes, i.e., “The vast nature of the present communication skills training” and “administrative requirements of the training program regarding communication skills.” The first theme included the educational needs of students, the problems associated with training people to have good communication skills, the importance of good communication skills in performing professional duties, communication skills and job requirements, the learning environment of communication skills, and the status of existing training programs for communication skills. Strategies and suitable methods for teaching communication skills and methods of evaluating the students in this regard also were obtained. Conclusion The findings of this study were the elements required to design a proper and local model to teach communication skills to medical students through analyzing the concepts of effective communication. The results of this study can be useful for medical

  16. Investigating the key factors in designing a communication skills program for medical students: A qualitative study.

    Science.gov (United States)

    Mahdi Hazavehei, Seyyed M; Karimi Moonaghi, Hossein; Moeini, Babak; Moghimbeigi, Abbas; Emadzadeh, Ali

    2015-11-01

    Medical students have a serious need to acquire communication skills with others. In many medical schools, special curriculums are developed to improve such skills. Effective training of communication skills requires expert curriculum design. The aim of this study was to explore the experiences and views of experts and stakeholders in order to design a suitable training program in communication skills for medical students. The content analysis approach was used in this qualitative study. Forty-three participants were selected from the faculty, nurses, physicians, residents, and medical students at Mashhad University of Medical Sciences using purposive sampling. The data were collected through focus group discussions and semi-structured interviews. To ensure the accuracy of the data, the criteria of credibility, transferability, dependability, and conformability were met. The data were analyzed by MAXQDA software using the Graneheim & Lundman model. The findings of this study consisted of two main themes, i.e., "The vast nature of the present communication skills training" and "administrative requirements of the training program regarding communication skills." The first theme included the educational needs of students, the problems associated with training people to have good communication skills, the importance of good communication skills in performing professional duties, communication skills and job requirements, the learning environment of communication skills, and the status of existing training programs for communication skills. Strategies and suitable methods for teaching communication skills and methods of evaluating the students in this regard also were obtained. The findings of this study were the elements required to design a proper and local model to teach communication skills to medical students through analyzing the concepts of effective communication. The results of this study can be useful for medical faculties in designing a proper program for

  17. A descriptive study of the barriers to study abroad in engineering undergraduate education and recommendations for program design

    Science.gov (United States)

    Klahr, Sabine Christine

    This study analyzed and compared the program designs of international exchange and internship programs for engineering students in the United States and the European Union (E.U.) as well as the extent to which these programs have removed barriers to study abroad. The purpose of this study was to provide recommendations for the design of international programs in the U.S. that would increase the proportion of engineering students who choose to study or intern abroad. Coordinators of international programs in engineering were surveyed about their perceptions of program success and a number of variables related to program design. A Chi-Square Test of Independence of (A) program success and (B) European and U.S. programs (i.e. institution location) cross-tabulated with all other variables and each other indicated those variables that contribute to the success of programs and those variables that are associated with either U.S. or European programs. In addition, all programs were described and the answers to open-ended survey questions were analyzed quantitatively. The analyses indicated that European programs tend to be more successful in implementing study/intern abroad programs for engineering students than U.S. programs. The elements of program design contributing to the greater success of European programs and the success of specific U.S. programs were described. In addition, the characteristics of overall successful programs (U.S. and E.U. data combined) were explained. The results indicated that successful programs tend to: (1) be promoted by the college and/or departments of engineering, (2) offer study/intern abroad opportunities in English-speaking settings, (3) award full credit at the home institution for required engineering courses completed at the host institution, (4) offer scholarships and financial aid for participation in the program, (5) require participating students to have completed their second year of university course work prior to applying to

  18. Designing a monitoring program to estimate estuarine survival of anadromous salmon smolts: simulating the effect of sample design on inference

    Science.gov (United States)

    Romer, Jeremy D.; Gitelman, Alix I.; Clements, Shaun; Schreck, Carl B.

    2015-01-01

    A number of researchers have attempted to estimate salmonid smolt survival during outmigration through an estuary. However, it is currently unclear how the design of such studies influences the accuracy and precision of survival estimates. In this simulation study we consider four patterns of smolt survival probability in the estuary, and test the performance of several different sampling strategies for estimating estuarine survival assuming perfect detection. The four survival probability patterns each incorporate a systematic component (constant, linearly increasing, increasing and then decreasing, and two pulses) and a random component to reflect daily fluctuations in survival probability. Generally, spreading sampling effort (tagging) across the season resulted in more accurate estimates of survival. All sampling designs in this simulation tended to under-estimate the variation in the survival estimates because seasonal and daily variation in survival probability are not incorporated in the estimation procedure. This under-estimation results in poorer performance of estimates from larger samples. Thus, tagging more fish may not result in better estimates of survival if important components of variation are not accounted for. The results of our simulation incorporate survival probabilities and run distribution data from previous studies to help illustrate the tradeoffs among sampling strategies in terms of the number of tags needed and distribution of tagging effort. This information will assist researchers in developing improved monitoring programs and encourage discussion regarding issues that should be addressed prior to implementation of any telemetry-based monitoring plan. We believe implementation of an effective estuary survival monitoring program will strengthen the robustness of life cycle models used in recovery plans by providing missing data on where and how much mortality occurs in the riverine and estuarine portions of smolt migration. These data

  19. Current status and perspective of multinational design evaluation program in Korea

    International Nuclear Information System (INIS)

    Sung, Key Yong

    2008-01-01

    The Multinational Design Evaluation Program (MDEP) is a multinational initiative to develop innovative approaches to leverage the resources and knowledge of the national regulatory authorities who will be tasked with the review of new reactor power plant designs. MDEP consisted of three stages: Stage 1 involved multilateral cooperation within existing regulatory frameworks; Stage 2 focused on enhanced multinational cooperation and convergence of codes, standards, and safety goals; and Stage 3 involved implementation of Stage 2 products to facilitate licensing processes for new reactors, including those being developed by the Generation IV International Forum. A year-long pilot project was initiated to assess the feasibility of the Stage 2 goals since October 2006. The main objective of Stage 2, as set in the Terms of Reference (ToR), was to establish reference regulatory practices and regulations to enhance the safety of new nuclear reactor designs. The convergence of regulatory practices and regulations associated with the reactor design reviews should allow for enhanced cooperation among regulators, improving the effectiveness and efficiency of the regulatory design reviews, which are part of each country's licensing process. This is expected to lead to a convergence of codes, standards and safety goals in the participating countries. To this end, a pilot project, consisting of two working groups, was launched. The first working group investigated the licensing basis for new nuclear reactor designs, the scope of design safety reviews and overall safety goals. The second examined regulatory oversight of components manufactured for new nuclear reactors

  20. Educating the creative citizen. Design education programs in the knowledge economy

    Directory of Open Access Journals (Sweden)

    Natalie Wright

    2014-12-01

    Full Text Available The shift in the last twenty years from an industrialised economy to a knowledge economy demands new modes of education in which individuals can effectively acquire 21st century competencies. This article builds on the findings and recommendations of a Knowledge Economy Market Development Mapping Study (KEMDMS, conducted in Queensland, Australia. The study was conducted to identify the value of design education programs from primary school through to the professional development level. This article considers the ability of design education as a framework to deliver on the 21st century competences required for the three defining features of the creative knowledge economy – Innovation, Transdisciplinarity and Networks. This is achieved by contextualising key findings from the KEMDMS, including current design education initiatives, and outlining the current and future challenges faced. From this, this article focuses on the role of the tertiary education sector as the central actor in the creative economy in the development of generic design/design education capabilities. Through the unpacking of the study's three key observation themes for change, a holistic design education framework is proposed, and further research directions are discussed. Keywords: Knowledge economy, creative economy, design education, transdisciplinarity, networks, innovation

  1. Development of Thermal Design Program for an Electronic Telecommunication System Using Heat Sink

    International Nuclear Information System (INIS)

    Lee, Jung Hwan; Kim, Jong Man; Chun, Ji Hwan; Bae, Chul Ho; Suh, Myung Won

    2007-01-01

    The purpose of this study is to investigate the cooling performance of heat sinks for an electronic telecommunication system by adequate natural convection. Heat generation rates of electronic components and the temperature distributions of heat sinks and surrounding air are analyzed experimentally and numerically. In order to perform the heat transfer analysis for the thermal design of telecommunication system, a program is developed. The program used the graphic user interface environment to determine the arrangement of heat sources, interior fan capacity, and heat sink configuration. The simulation results showed that the heat sinks were able to achieve a cooling capacity of up to 230W at the maximum temperature difference of 19 .deg. C. To verify the results from the numerical simulation, an experiment was conducted under the same condition as the numerical simulation, and their results were compared. The design program gave good prediction of the effects of various parameters involved in the design of a heat sinks for an electronic telecommunication system

  2. Designing an oral health module for the Bachelor of Midwifery program at an Australian University.

    Science.gov (United States)

    Duff, Margaret; Dahlen, Hannah G; Burns, Elaine; Priddis, Holly; Schmied, Virginia; George, Ajesh

    2017-03-01

    Maternal oral health is important yet many pregnant women are unaware of its significance. Midwives are advised to promote oral health during pregnancy and are supported to do this in Australia through the Midwifery Initiated Oral Health training program. However, limited undergraduate education is being provided to midwifery students in this area. The objective of this paper is to describe how an innovative oral health education module for an undergraduate midwifery course in Australia was designed using a multidisciplinary approach. Midwives experienced in curriculum development and key investigators from the Midwifery Initiated Oral Health program designed the module using existing literature. Constructive alignment, blended learning and scaffolding were used in the design process. The draft module was then reviewed by midwifery academics and their feedback incorporated. The final module involves 4 h of teaching and learning and contains three components incorporated into first year course units. Each component is aligned with existing learning outcomes and incorporates blended learning approaches and tutorials/class activities as well as online quizzes and personal reflection. The module details key information (current evidence; basic anatomy/physiology; common oral conditions; and guidelines during pregnancy) that could better prepare students to promote oral health in clinical practice. This is the first time such an innovative, multidisciplinary approach has been undertaken embedding oral health in an undergraduate midwifery program in Australia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

    1991-03-01

    Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

  4. REFERENCE MANUAL FOR RASSMIT VERSION 2.1: SUB-SLAB DEPRESSURIZATION SYSTEM DESIGN PERFORMANCE SIMULATION PROGRAM

    Science.gov (United States)

    The report is a reference manual for RASSMlT Version 2.1, a computer program that was developed to simulate and aid in the design of sub-slab depressurization systems used for indoor radon mitigation. The program was designed to run on DOS-compatible personal computers to ensure ...

  5. Designing optimal cell factories: integer programming couples elementary mode analysis with regulation

    Directory of Open Access Journals (Sweden)

    Jungreuthmayer Christian

    2012-08-01

    Full Text Available Abstract Background Elementary mode (EM analysis is ideally suited for metabolic engineering as it allows for an unbiased decomposition of metabolic networks in biologically meaningful pathways. Recently, constrained minimal cut sets (cMCS have been introduced to derive optimal design strategies for strain improvement by using the full potential of EM analysis. However, this approach does not allow for the inclusion of regulatory information. Results Here we present an alternative, novel and simple method for the prediction of cMCS, which allows to account for boolean transcriptional regulation. We use binary linear programming and show that the design of a regulated, optimal metabolic network of minimal functionality can be formulated as a standard optimization problem, where EM and regulation show up as constraints. We validated our tool by optimizing ethanol production in E. coli. Our study showed that up to 70% of the predicted cMCS contained non-enzymatic, non-annotated reactions, which are difficult to engineer. These cMCS are automatically excluded by our approach utilizing simple weight functions. Finally, due to efficient preprocessing, the binary program remains computationally feasible. Conclusions We used integer programming to predict efficient deletion strategies to metabolically engineer a production organism. Our formulation utilizes the full potential of cMCS but adds additional flexibility to the design process. In particular our method allows to integrate regulatory information into the metabolic design process and explicitly favors experimentally feasible deletions. Our method remains manageable even if millions or potentially billions of EM enter the analysis. We demonstrated that our approach is able to correctly predict the most efficient designs for ethanol production in E. coli.

  6. Electric-powered passenger vehicle design study program. Task 1. Tradeoff studies

    Energy Technology Data Exchange (ETDEWEB)

    Rowlett, B.H.

    1976-09-16

    Using the baseline vehicle and power system design established previously to meet the performance goals of the program, three power system computer simulation programs were prepared for the basic vehicle tradeoff studies. These programs simulate the performance of the power system and vehicle over different types of driving conditions such as maximum power acceleration, deceleration, city driving cycles, and hill climbing, and permit accurate determination of the benefits of the unique hybrid power system, the total energy required for the suburban city driving cycle, and the extremes of the operating envelopes of the components so that component design options can be defined and studied. Component design tradeoff studies were conducted, including sensitivity studies to show the criticality of the various losses and unknowns in the analytical models. Also, preliminary vehicle layout studies were performed to determine the best locations of the power system and the batteries. Three basic design options are identified for further study. Economic studies were initiated using analytical models to establish the complete vehicle weight and cost breakdowns. Preliminary reliability and safety studies were completed, and maintainability and safety certification criteria established. The detailed analysis of the power system has verified the feasibility of the system and of the performance expectations. Also, the feasibility of energy recovery from regenerative braking has been confirmed. The sensitivity analysis of the power system shows that sufficient margin for unknown design variables is provided. The preliminary economic analysis indicates that the most difficult objective of the study will be the selection of the cost and weight relationships which are required to achieve the overall cost objectives.

  7. Designing optimal cell factories: integer programming couples elementary mode analysis with regulation.

    Science.gov (United States)

    Jungreuthmayer, Christian; Zanghellini, Jürgen

    2012-08-16

    Elementary mode (EM) analysis is ideally suited for metabolic engineering as it allows for an unbiased decomposition of metabolic networks in biologically meaningful pathways. Recently, constrained minimal cut sets (cMCS) have been introduced to derive optimal design strategies for strain improvement by using the full potential of EM analysis. However, this approach does not allow for the inclusion of regulatory information. Here we present an alternative, novel and simple method for the prediction of cMCS, which allows to account for boolean transcriptional regulation. We use binary linear programming and show that the design of a regulated, optimal metabolic network of minimal functionality can be formulated as a standard optimization problem, where EM and regulation show up as constraints. We validated our tool by optimizing ethanol production in E. coli. Our study showed that up to 70% of the predicted cMCS contained non-enzymatic, non-annotated reactions, which are difficult to engineer. These cMCS are automatically excluded by our approach utilizing simple weight functions. Finally, due to efficient preprocessing, the binary program remains computationally feasible. We used integer programming to predict efficient deletion strategies to metabolically engineer a production organism. Our formulation utilizes the full potential of cMCS but adds additional flexibility to the design process. In particular our method allows to integrate regulatory information into the metabolic design process and explicitly favors experimentally feasible deletions. Our method remains manageable even if millions or potentially billions of EM enter the analysis. We demonstrated that our approach is able to correctly predict the most efficient designs for ethanol production in E. coli.

  8. 22 CFR 62.62 - Termination of, or denial of redesignation for, a class of designated programs.

    Science.gov (United States)

    2010-04-01

    ... States or no longer furthers the public diplomacy mission of the Department of State. Upon such a..., a class of designated programs. 62.62 Section 62.62 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES EXCHANGE VISITOR PROGRAM Termination and Revocation of Programs § 62.62 Termination...

  9. Description of the Design and Implementation of a School-Based Obesity Prevention Program Addressing Needs of Middle School Students

    Science.gov (United States)

    Ward-Begnoche, Wendy L.; Gance-Cleveland, Bonnie; Harris, Margaret M.; Dean, Janice

    2008-01-01

    This article describes the design and implementation of a school-based obesity prevention program, the successes associated with its implementation, and challenges with development and application of the program's curriculum base. The program is described, including purpose and goals, content and structure of the curriculum, type and training of…

  10. 78 FR 52907 - Fees for Reviews of the Rule Enforcement Programs of Designated Contract Markets and Registered...

    Science.gov (United States)

    2013-08-27

    ... are designed to recover program costs, including direct labor costs and overhead. The overhead rate is calculated by dividing total Commission-wide overhead direct program labor costs into the total amount of the Commission-wide overhead pool. For this purpose, direct program labor costs are the salary costs of personnel...

  11. 77 FR 74351 - Fees for Reviews of the Rule Enforcement Programs of Designated Contract Markets and Registered...

    Science.gov (United States)

    2012-12-14

    ... the Commission to the SROs are designed to recover program costs, including direct labor costs and... costs into the total amount of the Commission-wide overhead pool. For this purpose, direct program labor... direct program costs, plus an overhead factor. The Commission calculates actual costs, then calculates an...

  12. 77 FR 26672 - Fees for Reviews of the Rule Enforcement Programs of Designated Contract Markets and Registered...

    Science.gov (United States)

    2012-05-07

    ... Commission to the SROs are designed to recover program costs, including direct labor costs and overhead. The overhead rate is calculated by dividing total Commission-wide overhead direct program labor costs into the total amount of the Commission-wide overhead pool. For this purpose, direct program labor costs are the...

  13. Design and implementation of a modular program system for the carrying-through of statistical analyses

    International Nuclear Information System (INIS)

    Beck, W.

    1984-01-01

    From the complexity of computer programs for the solution of scientific and technical problems results a lot of questions. Typical questions concern the strength and weakness of computer programs, the propagation of incertainties among the input data, the sensitivity of input data on output data and the substitute of complex models by more simple ones, which provide equivalent results in certain ranges. Those questions have a general practical meaning, principle answers may be found by statistical methods, which are based on the Monte Carlo Method. In this report the statistical methods are chosen, described and valuated. They are implemented into the modular program system STAR, which is an own component of the program system RSYST. The design of STAR considers users with different knowledge of data processing and statistics. The variety of statistical methods, generating and evaluating procedures. The processing of large data sets in complex structures. The coupling to other components of RSYST and RSYST foreign programs. That the system can be easily modificated and enlarged. Four examples are given, which demonstrate the application of STAR. (orig.) [de

  14. Designing and Evaluating a Scientific Training Program and Virtual Learning Materials.

    Science.gov (United States)

    van Raalte, Lisa; Boulay, Rachel

    2013-01-01

    The University of Hawaii's John A. Burns School of Medicine developed a professional development program and virtual learning materials to assist high school science teachers become familiar with laboratory techniques prior to engaging in authentic molecular biology research. The purpose of this paper is to provide an evaluative overview of the program with emphasis on the virtual materials that were designed to employ a blended learning approach to augment offline classroom learning. The virtual learning materials provide a unique sphere for scientific learning in which skills can be reproduced in an offline environment. Twelve high school science teachers participated in the training program and were given full access to the online materials. After participation in the program, teachers filled out a final survey and completed a final written reflective statement as a form of evaluating the program and online materials. Thematic analysis was used to code participants' responses. Results showed that teachers recounted meeting the scientists as a valuable experience, teachers were grateful to learn real-world application of current research, and teachers described the importance of learning skills to prepare students to succeed in higher education. Additionally, results showed teacher's intent to use the virtual learning materials as homework tools and in classroom lessons.

  15. Design and implementation of a programming circuit in radiation-hardened FPGA

    International Nuclear Information System (INIS)

    Wu Lihua; Han Xiaowei; Zhao Yan; Liu Zhongli; Yu Fang; Chen, Stanley L.

    2011-01-01

    We present a novel programming circuit used in our radiation-hardened field programmable gate array (FPGA) chip. This circuit provides the ability to write user-defined configuration data into an FPGA and then read it back. The proposed circuit adopts the direct-access programming point scheme instead of the typical long token shift register chain. It not only saves area but also provides more flexible configuration operations. By configuring the proposed partial configuration control register, our smallest configuration section can be conveniently configured as a single data and a flexible partial configuration can be easily implemented. The hierarchical simulation scheme, optimization of the critical path and the elaborate layout plan make this circuit work well. Also, the radiation hardened by design programming point is introduced. This circuit has been implemented in a static random access memory (SRAM)-based FPGA fabricated by a 0.5 μm partial-depletion silicon-on-insulator CMOS process. The function test results of the fabricated chip indicate that this programming circuit successfully realizes the desired functions in the configuration and read-back. Moreover, the radiation test results indicate that the programming circuit has total dose tolerance of 1 x 10 5 rad(Si), dose rate survivability of 1.5 x 10 11 rad(Si)/s and neutron fluence immunity of 1 x 10 14 n/cm 2 .

  16. SLS-SPEC-159 Cross-Program Design Specification for Natural Environments (DSNE) Revision E

    Science.gov (United States)

    Roberts, Barry C.

    2017-01-01

    The DSNE completes environment-related specifications for architecture, system-level, and lower-tier documents by specifying the ranges of environmental conditions that must be accounted for by NASA ESD Programs. To assure clarity and consistency, and to prevent requirements documents from becoming cluttered with extensive amounts of technical material, natural environment specifications have been compiled into this document. The intent is to keep a unified specification for natural environments that each Program calls out for appropriate application. This document defines the natural environments parameter limits (maximum and minimum values, energy spectra, or precise model inputs, assumptions, model options, etc.), for all ESD Programs. These environments are developed by the NASA Marshall Space Flight Center (MSFC) Natural Environments Branch (MSFC organization code: EV44). Many of the parameter limits are based on experience with previous programs, such as the Space Shuttle Program. The parameter limits contain no margin and are meant to be evaluated individually to ensure they are reasonable (i.e., do not apply unrealistic extreme-on-extreme conditions). The natural environments specifications in this document should be accounted for by robust design of the flight vehicle and support systems. However, it is understood that in some cases the Programs will find it more effective to account for portions of the environment ranges by operational mitigation or acceptance of risk in accordance with an appropriate program risk management plan and/or hazard analysis process. The DSNE is not intended as a definition of operational models or operational constraints, nor is it adequate, alone, for ground facilities which may have additional requirements (for example, building codes and local environmental constraints). "Natural environments," as the term is used here, refers to the environments that are not the result of intended human activity or intervention. It

  17. NASA/USRA advanced space design program: The laser powered interorbital vehicle

    Science.gov (United States)

    1989-01-01

    A preliminary design is presented for a low-thrust Laser Powered Interorbital Vehicle (LPIV) intended for cargo transportation between an earth space station and a lunar base. The LPIV receives its power from two iodide laser stations, one orbiting the earth and the other located on the surface of the moon. The selected mission utilizes a spiral trajectory, characteristic of a low-thrust spacecraft, requiring 8 days for a lunar rendezvous and an additional 9 days for return. The ship's configuration consists primarily of an optical train, two hydrogen plasma engines, a 37.1 m box beam truss, a payload module, and fuel tanks. The total mass of the vehicle fully loaded is 63300 kg. A single plasma, regeneratively cooled engine design is incorporated into the two 500 N engines. These are connected to the spacecraft by turntables which allow the vehicle to thrust tangentially to the flight path. Proper collection and transmission of the laser beam to the thrust chambers is provided through the optical train. This system consists of the 23 m diameter primary mirror, a convex parabolic secondary mirror, a beam splitter and two concave parabolic tertiary mirrors. The payload bay is capable of carrying 18000 kg of cargo. The module is located opposite the primary mirror on the main truss. Fuel tanks carrying a maximum of 35000 kg of liquid hydrogen are fastened to tracks which allow the tanks to be moved perpendicular to the main truss. This capability is required to prevent the center of mass from moving out of the thrust vector line. The laser beam is located and tracked by means of an acquisition, pointing and tracking system which can be locked onto the space-based laser station. Correct orientation of the spacecraft with the laser beam is maintained by control moment gyros and reaction control rockets. Additionally an aerobrake configuration was designed to provide the option of using the atmospheric drag in place of propulsion for a return trajectory.

  18. Design program to increase the EDG rated load at Gulf States Utilities - River Bend Station

    International Nuclear Information System (INIS)

    Pischinger, F.; Rogers, G.; Last, R.

    1987-01-01

    This paper presents the results of a program to develop system design improvements which, if incorporated, would increase the EDG rated loads at Gulf States Utilities (GSU) River Bend Station (RBS) - unit 1. The Transamerica Delaval Inc. (TDI) DSR-48 diesel generators are currently restricted to 3130 kW while the name plate rating is 3500 kW, continuous, and 3850 kW for intermittent overload conditions. The project focused on the design margin of the diesel engine crankshaft and evaluated alternative modifications including: reduction of the EDG system excitation; reduction of crankshaft stresses through geometrical changes; and increased material strength. Upon completing an assessment of the engine operational characteristics and evaluating the existing crankshaft design, improved crankshaft design, material and fabrication specifications were developed. These changes include modifications to the crank web fillet geometries and oil hole radii. However, no changes are necessary for the existing block, connecting rods, bearings or generator. The design calculated safety factor is 1.269 at 3500 kW, when using the conservative criteria described by Kritzer and Stahl which is commonly used by German engine manufacturers. A factor of 1.25 is considered adequate when applying these conservative design criteria. All of these proposed changes, in combination, provide an adequate operational safety factor at 3500 kW, 450 rpm, with intermittent overload to 3850 kW. (orig.)

  19. A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Pellegrini Christine A

    2012-11-01

    Full Text Available Abstract Background Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Methods/design Ninety-six obese adults (BMI 30–39.9 kg/m2 will be randomized to one of three treatment conditions: (1 standard behavioral weight loss (STND, (2 technology-supported behavioral weight loss (TECH; or (3 self-guided behavioral weight loss (SELF. All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD’s and will not receive coaching calls. During months 1–6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer. STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. Discussion ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. Trial registration NCT01051713

  20. A worksite prevention program for construction workers: design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Proper Karin I

    2010-06-01

    Full Text Available Abstract Background A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. Methods The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1 two individual training sessions of a physical therapist to lower the physical workload, (2 a Rest-Break tool to improve the balance between work and recovery, and (3 two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. Discussion The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. Trial Registration NTR1278

  1. Be Explicit: Geoscience Program Design to Prepare the Next Generation of Geoscientists

    Science.gov (United States)

    Mogk, D. W.

    2015-12-01

    The work of geoscientists is to engage inquiry, discovery and exploration of Earth history and processes, and increasingly, to apply this knowledge to the "grand challenges" that face humanity. Geoscience as a discipline is confronted with an incomplete geologic record, observations or data that are often ambiguous or uncertain, and a need to grasp abstract concepts such as temporal reasoning ('deep time'), spatial reasoning over many orders of magnitude, and complex system behavior. These factors provide challenges, and also opportunities, for training future geoscientists. Beyond disciplinary knowledge, it is also important to provide opportunities for students to engage the community of practice and demonstrate how to "be" a geoscientist. Inculcation of geoscience "ways of knowing" is a collective responsibility for geoscientists (teaching faculty and other professionals), at all instructional levels, in all geoscience disciplines, and for all students. A whole-student approach is recommended. Geoscience programs can be designed to focus on student success by explictly: 1) defining programmatic student learning outcomes , 2) embedding assessments throughout the program to demonstrate mastery, 3) aligning course sequences to reinforce and anticipate essential concepts/skills, 4) preparing students to be life-long learners; 5) assigning responsibilities to courses/faculty to ensure these goals have been met; 6) providing opportunities for students to "do" geoscience (research experiences), and 7) modeling professional behaviors in class, field, labs, and informal settings. Extracurricular departmental activities also contribute to student development such as journal clubs, colloquia, field trips, and internships. Successful design of geoscience department programs is informed by: the AGI Workforce program and Summit on the Future of Geoscience Education that define pathways for becoming a successful geoscientist; training in Geoethics; Geoscience Education

  2. Preventing Sexual Violence in Adolescence: Comparison of a Scientist-Practitioner Program and a Practitioner Program Using a Cluster-Randomized Design.

    Science.gov (United States)

    Muck, Christoph; Schiller, Eva-Maria; Zimmermann, Maria; Kärtner, Joscha

    2018-02-01

    Numerous school-based prevention programs have been developed by scientists and practitioners to address sexual violence in adolescence. However, such programs struggle with two major challenges. First, the effectiveness of many well-established practitioner programs has not been rigorously evaluated. Second, effective scientific programs may be hard to implement into everyday school practice. Combining the knowledge of scientists and practitioners in a scientist-practitioner program could be a helpful compromise. The aim of the present study is to evaluate the effects of a scientist-practitioner program and a practitioner program using a cluster-randomized experimental design. Twenty-seven school classes were randomly assigned to either one of two programs or a control group. Outcome variables (knowledge, attitudes, behavior, and iatrogenic effects) were assessed at pretest, posttest, and a 6-month follow-up for 453 adolescents (55% female, Mage = 14.18). Short-term effects were found in both programs regarding general knowledge, knowledge of professional help, and victim-blaming attitudes. Long-term effects were found in both programs regarding general knowledge and knowledge of professional help and, in the practitioner program, in a reduction of victimization. No other effects were found on attitudes and behavior. No iatrogenic effects in the form of increased anxiety were found. Both the scientist-practitioner and the practitioner program show promise for the prevention of sexual violence in adolescence; in particular, the practitioner program may be a more cost-effective method.

  3. Volunteer Educators' Influence on Youth Participation and Learning in 4-H STEM Learning by Design Programs

    Science.gov (United States)

    Worker, Steven Michael

    The purpose of this study was to describe the co-construction of three 4-H STEM (science, technology, engineering, and mathematics) learning by design programs by volunteer educators and youth participants in the 4-H Youth Development Program. The programs advanced STEM learning through design, a pedagogical approach to support youth in planning, designing, and making shareable artifacts. This pedagogical approach is a special case of project-based learning, related to the practices found in the science learning through design literature as well as the making and tinkering movements. Specifically, I explored adult volunteer educators' roles and pedagogical strategies implementing the 4-H Junk Drawer Robotics curriculum (Mahacek, Worker, and Mahacek, 2011) and how that, in turn, afforded and constrained opportunities for youth to display or report engagement in design practices; learning of STEM content; strengthening tool competencies; dispositions of resilience, reciprocity, and playfulness; and psychological ownership. The curriculum targeted middle school youth with a sequence of science inquiry activities and engineering design challenges. This study employed naturalist and multiple-case study methodology relying on participant observations and video, interviews with educators, and focus groups with youth within three 4-H educational robotics programs organized by adult 4-H volunteer educators. Data collection took place in 2014 and 2015 at Santa Clara with an educator and seven youth; Solano with three educators and eight youth; and Alameda with an educator and seven youth. Data analysis revealed six discrete categories of pedagogy and interactions that I labeled as participation structures that included lecture, demonstration, learning activity, group sharing, scripted build, and design & build. These participation structures were related to the observed pedagogical practices employed by the educators. There was evidence of youth engagement in design

  4. Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

    International Nuclear Information System (INIS)

    1993-11-01

    This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

  5. High-temperature turbine technology program. Turbine subsystem design report: Low-Btu gas

    Energy Technology Data Exchange (ETDEWEB)

    Horner, M.W.

    1980-12-01

    The objective of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) program is to bring to technology readiness a high-temperature (2600/sup 0/F to 3000/sup 0/F firing temperature) turbine within a 6- to 10-year duration, Phase II has addressed the performance of component design and technology testing in critical areas to confirm the design concepts identified in the earlier Phase I program. Based on the testing and support studies completed under Phase II, this report describes the updated turbine subsystem design for a coal-derived gas fuel (low-Btu gas) operation at 2600/sup 0/F turbine firing temperature. A commercial IGCC plant configuration would contain four gas turbines. These gas turbines utilize an existing axial flow compressor from the GE product line MS6001 machine. A complete description of the Primary Reference Design-Overall Plant Design Description has been developed and has been documented. Trends in overall plant performance improvement at higher pressure ratio and higher firing temperature are shown. It should be noted that the effect of pressure ratio on efficiency is significally enhanced at higher firing temperatures. It is shown that any improvement in overall plant thermal efficiency reflects about the same level of gain in Cost of Electricity (COE). The IGCC concepts are shown to be competitive in both performance and cost at current and near-term gas turbine firing temperatures of 1985/sup 0/F to 2100/sup 0/F. The savings that can be accumulated over a thirty-year plant life for a water-cooled gas turbine in an IGCC plant as compared to a state-of-the-art coal-fired steam plant are estimated. A total of $500 million over the life of a 1000 MW plant is projected. Also, this IGCC power plant has significant environmental advantages over equivalent coal-fired steam power plants.

  6. SATCAP-C : a program for thermal hydraulic design of pressurized water injection type capsule

    International Nuclear Information System (INIS)

    Harayama, Yasuo; Someya, Hiroyuki; Asoh, Tomokazu; Niimi, Motoji

    1992-10-01

    There are capsules called 'Pressure Water Injection Type Capsule' as a kind of irradiation devices at the Japan Materials Testing Reactor (JMTR). A type of the capsules is a 'Boiling Water Capsule' (usually named BOCA). The other type is a 'Saturated Temperature Capsule' (named SATCAP). When the water is kept at a constant pressure, the water temperature does not become higher than the saturated temperature so far as the water does not fully change to steam. These type capsules are designed on the basis of the conception of applying the water characteristic to the control of irradiation temperature of specimens in the capsules. In designing of the capsules in which the pressurized water is injected, thermal performances have to be understood as exactly as possible. It is not easy however to predict thermal performances such as axially temperature distribution of water injected in the capsule, because there are heat-sinks at both side of inner and outer of capsule casing as the result that the water is fluid. Then, a program (named SATCAP-C) for the BOCA and SATCAP was compiled to grasp the thermal performances in the capsules and has been used the design of the capsules and analysis of the data obtained from some actual irradiation capsules. It was confirmed that the program was effective in thermal analysis for the capsules. The analysis found out the values for heat transfer coefficients at various surfaces of capsule components and some thermal characteristics of capsules. (author)

  7. Student Support and Advising in a New Online Ed.D. of Instructional Systems Technology Program: A Design Case

    Science.gov (United States)

    Exter, Marisa; Korkmaz, Nilufer; Boling, Elizabeth

    2014-01-01

    This design case describes an online Ed.D. in Instructional Systems Technology (IST) launched in 2012. We will focus on a key aspect of the design: program advising and students' relationship with their advisors. While the design was responsive in its earliest stages to organizational constraints, legislative requirements and the known…

  8. Integrated Design of Superconducting Magnets with the CERN Field Computation Program ROXIE

    CERN Document Server

    Russenschuck, Stephan; Bazan, M; Lucas, J; Ramberger, S; Völlinger, Christine

    2000-01-01

    The program package ROXIE has been developed at CERN for the field computation of superconducting accelerator magnets and is used as an approach towards the integrated design of such magnets. It is also an example of fruitful international collaborations in software development.The integrated design of magnets includes feature based geometry generation, conceptual design using genetic optimization algorithms, optimization of the iron yoke (both in 2d and 3d) using deterministic methods, end-spacer design and inverse field calculation.The paper describes the version 8.0 of ROXIE which comprises an automatic mesh generator, an hysteresis model for the magnetization in superconducting filaments, the BEM-FEM coupling method for the 3d field calculation, a routine for the calculation of the peak temperature during a quench and neural network approximations of the objective function for the speed-up of optimization algorithms, amongst others.New results of the magnet design work for the LHC are given as examples.

  9. Design Automation Using Script Languages. High-Level CAD Templates in Non-Parametric Programs

    Science.gov (United States)

    Moreno, R.; Bazán, A. M.

    2017-10-01

    The main purpose of this work is to study the advantages offered by the application of traditional techniques of technical drawing in processes for automation of the design, with non-parametric CAD programs, provided with scripting languages. Given that an example drawing can be solved with traditional step-by-step detailed procedures, is possible to do the same with CAD applications and to generalize it later, incorporating references. In today’s modern CAD applications, there are striking absences of solutions for building engineering: oblique projections (military and cavalier), 3D modelling of complex stairs, roofs, furniture, and so on. The use of geometric references (using variables in script languages) and their incorporation into high-level CAD templates allows the automation of processes. Instead of repeatedly creating similar designs or modifying their data, users should be able to use these templates to generate future variations of the same design. This paper presents the automation process of several complex drawing examples based on CAD script files aided with parametric geometry calculation tools. The proposed method allows us to solve complex geometry designs not currently incorporated in the current CAD applications and to subsequently create other new derivatives without user intervention. Automation in the generation of complex designs not only saves time but also increases the quality of the presentations and reduces the possibility of human errors.

  10. A computer program for designing fin-and-tube heat exchanger for EGR cooler application

    Science.gov (United States)

    Syaiful, Marwan, M. A.; Tandian, N. P.; Bae, M.

    2016-03-01

    EGR (exhaust gas recirculation) cooler is a kind of heat exchanger that is used to cool exhaust gas recirculation prior to be mixed with fresh air in an intake manifold of vehicle in order to obtain good reduction of NOxemissions. A fin-and-tube heat exchanger is more preferred as an EGR cooler than a shell-and-tube heat exchanger in this study due to its compactness. Manually designing many configurations of fin-and-tube heat exchanger for EGR cooler application consumes a lot of time and is high cost. Therefore, a computer aided design process of EGR cooler is required to overcome this problem. The EGR cooler design process was started by arranging the sequences of calculation algorithm in a computer program. A cooling media for this EGR cooler is air. The design is based on the effectiveness-number transfer unit (NTU) method. The EGR cooler design gives the geometry, heat transfer surface area, heat transfer coefficient and pressure drop of the EGR cooler. Comparison of the EGR cooler Nusselt number obtained in this study and that reported in literature shows less than 6.2% discrepancy.

  11. Planning for a program design for energy environmental analysis. Final report, draft

    Energy Technology Data Exchange (ETDEWEB)

    Denton, J; Saaty, T; Blair, P; Ma, F; Buneman, P

    1976-04-01

    The objective of the work reported here is to assist BER/ERDA in program planning with respect to a regional assessment study program for energy environmental analysis. The focus of the work was to examine the use of operational gaming fof regional assessment studies. Specific concerns were gaming applications (1) in regional assessment or management and direction of regional assessments; (2) for achieving a higher level of public understanding of environmental, health, and safety problems of energy; (3) with respect to the supply of adequately trained manpower for energy; (4) with respect to computational requirements; and (5) with respect to current state-of-the-art in computer simulation. In order to investigate these concerns and examine the feasibility of using operational gaming in a regional assessment study program, a Regional Energy Environment Game (REEG) was designed and implemented on an IBM 370/168 digital computer employing APL (A Programming Language). The applicability of interactive operational gaming has been demonstrated by the REEG as applied to a region consisting of Delaware, Maryland, New Jersey, Pennsylvania, and the District of Columbia.

  12. Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

    Energy Technology Data Exchange (ETDEWEB)

    Abhyankar, Nikit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

    2017-09-05

    Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALA light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.

  13. Design Considerations for Internet-Delivered Self-Management Programs for Adults With Hearing Impairment.

    Science.gov (United States)

    Preminger, Jill E; Rothpletz, Ann M

    2016-10-01

    Hearing impairment (HI) is a chronic condition; thus, even with treatment, residual participation restrictions and activity limitations typically remain. Individuals must learn to self-manage their HI. The purpose of this research note is to review components of successful Internet-based self-management programs and to evaluate group auditory rehabilitation (AR) programs with varying content, in order to make recommendations for the design of future Internet-based self-management programs. Effect sizes for changes in HI-specific quality of life following group AR activities from 4 published studies were calculated to determine if effect size varied systematically as a function of group activities. These findings are described using a self-management framework. Successful group AR activities include (a) psychosocial activities to promote role management, emotional management, and social support; (b) informational lectures and group discussion to promote education; (c) communication strategy exercises to promote self-efficacy and self-management skills; and (d) the inclusion of a frequent communication partner to promote social support and self-tailoring. It is recommended that future Internet-based self-management programs focus on the mechanisms of social support and education to promote learning and self-management skills. Future research will determine if these AR activities may be implemented effectively via the Internet.

  14. Lessons learned from the safety assistance program for soviet-designed reactors

    International Nuclear Information System (INIS)

    Steinberg, N.

    1999-01-01

    Two examples of nuclear power situation were compared in this conference paper - the situation in Lithuania and the situation in the Ukraine. Based on the examples mentioned, author conclude that the effectiveness of the Multi-National Safety Assistance Program for Soviet -Designed Reactors in a given recipient country does not depend, in practice, on engineering issues. The principal aspects that determine this effectiveness are: first, the level of safety culture in the country, beginning at the Governmental level but also at the level of the senior managers of nuclear power. The other important factor which contributes is the availability of a well-developed national program for upgrading NPP safety. The economical well-being of nuclear power and of the country as a whole also has a major effect on the effectiveness of the western technical assistance programs that are trying to upgrade reactor safety in a particular recipient country. And finally, international community should have well coordinated and well substantiated safety assistance program for specific country

  15. Designing Workshops for the Introduction of Lean Enablers to Engineering Programs

    DEFF Research Database (Denmark)

    Gersing, Kilian; Oehmen, Josef; Rebentisch, Eric Rebentisch

    2014-01-01

    There is a large and growing body of knowledge regarding so-called Lean best practices, including most recently in the area of program management and systems engineering. However, there is little elaboration of how these documented best practices are to be introduced to a professional workforce. ...... the Lean principles. The framework was validated through interactions with training professionals in a large automobile manufacturer, and using subject matter experts from a variety of industrial sectors. © 2014 The Authors. Published by Elsevier B.V.......There is a large and growing body of knowledge regarding so-called Lean best practices, including most recently in the area of program management and systems engineering. However, there is little elaboration of how these documented best practices are to be introduced to a professional workforce...... the systematic design of workshops focused specifically on the introduction of Lean principles and practices to program management and the professional workforce in a program environment. The framework is based on a thorough review of literature on training, workshop delivery, and Lean principles, as well...

  16. Objective Oriented Design of System Thermal Hydraulic Analysis Program and Verification of Feasibility

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

    2008-01-01

    The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. TRACE, RELAP5-3D and MARS codes are examples of these activities. The codes were redesigned to have modular structures utilizing Fortran 90 features. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. It was not commonly used in mainstream software application development until the early 1990s. Many modern programming languages now support OOP. Although the recent Fortran language also support the OOP, it is considered to have limited functions compared to the modern software features. In this work, objective oriented program for system safety analysis code has been tried utilizing modern C language feature. The advantage of OOP has been discussed after verification of design feasibility

  17. [Design of a program for the positive development of schoolchildren and characteristics of participants (Medellin, Colombia)].

    Science.gov (United States)

    Hernández, Dora María; Duque, Luis Fernando; Restrepo, Alexandra

    2014-01-01

    The design of the program for the promotion of personal potential and prevention of risky health behaviors in school-aged children, PILAS! Better Adults, Better Kids, was based on local and international evidence on programs for the prevention of school-based violence. The program offers a training process for parents and teachers through active methodologies and advice (provided for 10 months) based on topics that encourage individual child development and the delegitimization of violence in everyday interactions. A total of 306 teachers, 800 parents and 12,800 children benefited from the program. An initial measurement was conducted using a scale ranging from 0 to 100 in a sample of 1751 children. The results showed an average of 80 in the children's social skills, but caregivers reported high levels of aggression. Communication and supervision failures were found among parents, as well as punishment practices through psychological and physical aggression. Another finding was low social cohesion in the neighborhood. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  18. The Scratch Programming Language and Environment

    Science.gov (United States)

    Maloney, John; Resnick, Mitchel; Rusk, Natalie; Silverman, Brian; Eastmond, Evelyn

    2010-01-01

    Scratch is a visual programming environment that allows users (primarily ages 8 to 16) to learn computer programming while working on personally meaningful projects such as animated stories and games. A key design goal of Scratch is to support self-directed learning through tinkering and collaboration with peers. This article explores how the…

  19. SPSS programs for the measurement of nonindependence in standard dyadic designs.

    Science.gov (United States)

    Alferes, Valentim R; Kenny, David A

    2009-02-01

    Dyadic research is becoming more common in the social and behavioral sciences. The most common dyadic design is one in which two persons are measured on the same set of variables. Very often, the first analysis of dyadic data is to determine the extent to which the responses of the two persons are correlated-that is, whether there is nonindependence in the data. We describe two user-friendly SPSS programs for measuring nonindependence of dyadic data. Both programs can be used for distinguishable and indistinguishable dyad members. Inter1.sps is appropriate for interval measures. Inter2.sps applies to categorical variables. The SPSS syntax and data files related to this article may be downloaded as supplemental materials from brm.psychonomic-journals.org/content/supplemental.

  20. BEAMR: An interactive graphic computer program for design of charged particle beam transport systems

    Science.gov (United States)

    Leonard, R. F.; Giamati, C. C.

    1973-01-01

    A computer program for a PDP-15 is presented which calculates, to first order, the characteristics of charged-particle beam as it is transported through a sequence of focusing and bending magnets. The maximum dimensions of the beam envelope normal to the transport system axis are continuously plotted on an oscilloscope as a function of distance along the axis. Provision is made to iterate the calculation by changing the types of magnets, their positions, and their field strengths. The program is especially useful for transport system design studies because of the ease and rapidity of altering parameters from panel switches. A typical calculation for a system with eight elements is completed in less than 10 seconds. An IBM 7094 version containing more-detailed printed output but no oscilloscope display is also presented.

  1. Army Gas-Cooled Reactor Systems program: alternator final design report

    Energy Technology Data Exchange (ETDEWEB)

    1964-06-01

    The development and testing of a demonstration brushless alternator for the ML-1 mobile nuclear power plant is described. The brushless concept was selected after it became apparent that a conventional power generator could not satisfy the ML-1 weight and size requirements. The demonstration alternator fabricated and tested under this program did not meet all performance specifications; the efficiency was low and the unit could not be operated for significant periods of time without overheating. However, a large body of useful data was accumulated during the extensive development program. Of special interest are data on the rotor and stator design, the cooling requirements and on the distribution of eddy current losses. Analysis of the data indicates that a brushless alternator, only slightly larger and heavier than was specified for the ML-1, could be developed with a modest additional effort.

  2. Architecture and Design in eXtreme Programming; Introducing "Developer Stories"

    DEFF Research Database (Denmark)

    Jensen, Rolf Njor; Møller, Thomas; Sönder, Peter

    2006-01-01

    This article introduces a new practice to eXtreme Programming (XP): Developer stories. The goal of these stories and their creation process is to incorporate architectural planning to XP thus ensuring a viable architecture. By conducting a small development project using XP, we find that establis......This article introduces a new practice to eXtreme Programming (XP): Developer stories. The goal of these stories and their creation process is to incorporate architectural planning to XP thus ensuring a viable architecture. By conducting a small development project using XP, we find...... that establishing a viable architecture might be problematic. Arguing that architectural quality criteria in XP are traceable to traditional criteria, and by pointing to related work regarding incremental continous design, requirements management and large-scale refactorings, we find support for this claim. We...

  3. DESIGNING A G CODE PROGRAMMING LANGUAGE FOR THE REFERENCE POINT SEVEN-SPEED SHAFT

    Directory of Open Access Journals (Sweden)

    VALERIA VICTORIA IOVANOV

    2015-05-01

    Full Text Available A CNC machine makes use of mathematics and various coordinate systems to understand and process the information it receives to determine what to move where and how fast . The most important function of any CNC machine is precise and rigorous control of the motion. All CNC equipment have two or more directions of motion, called axes. CNC machines are driven by computer controlled servo motors and generally guided by a stored program, the type of motion (fast , linear, circular , the moving axes, the distances of motion and the speed of motion ( processing being programmable for most CNC machines .This paper proposes the design and implementation of a G code programming language for the reference point „Seven-speed shaft”, used in all fields, in the motion transmission systems.

  4. Advanced Light Water Reactor Plants System 80+trademark Design Certification Program

    International Nuclear Information System (INIS)

    1993-01-01

    The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+trademark during the US government's 1993 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW t (1350 MWe) Pressurized Water Reactor (PWR). The design consists of an essentially complete plant. It is based on evolutionary improvements to the Standardized System 80 nuclear steam supply system in operation at Palo Verde Units 1, 2, and 3, and the Duke Power Company P-81 balance-of-plant (BOP) that was designed and partially constructed at the Cherokee plant site. The System 80/P-81 original design has been substantially enhanced to increase conformance with the EPRI ALWR Utility Requirements Document (URD). Some design enhancements incorporated in the System 80+ design are included in the four units currently under construction in the Republic of Korea. These units form the basis of the Korean standardization program. The full System 80+ standard design has been offered to the Republic of China, in response to their recent bid specification. The ABB-CE Standard Safety Analysis Report (CESSAR-DC) was submitted to the NRC and a Draft Safety Evaluation Report was issued by the NRC in October 1992. CESSAR-DC contains the technical basis for compliance with the EPRI URD for simplified emergency planning. The Nuclear Steam Supply System (NSSS) is the standard ABB-Combustion Engineering two-loop arrangement with two steam generators, two hot legs and four cold legs each with a reactor coolant pump. The System 80+ standard plant includes a sperical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual containment

  5. Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

    Science.gov (United States)

    Selwitz, Jason Lawrence

    Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

  6. Which sensory perception is primarily considered, in consumers’ hedonic evaluation of foods?

    DEFF Research Database (Denmark)

    Andersen, Barbara Vad; Brockhoff, Per B.; Hyldig, Grethe

    the consumers primarily paid attention to when rating overall liking and sensory satisfaction, respectively. Four apple-cherry fruit drinks were used, varying in: type of sweetener, and addition of aroma and fibre. The fruit drinks were used in a in a cross-over consumer study on 67 subjects together...... of appearance, odour, taste and texture respectively, and sensory satisfaction. Further, liking of sensory properties differed in relation to overall liking and sensory satisfaction, respectively. Consumers primarily paid attention to liking of taste, when evaluating overall liking and sensory satisfaction...

  7. System programs design of motors; Sistema de programas de diseno de motores

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Gonzalez Palomas, Oscar; Ciprian Avila, Fernando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    This paper describes the objective of creating the program system for induction motors design SIPRODIMO, its scope, its general characteristics, its structure and the results obtained with its application, as well as the service capacity developed by the Motors Area of the Instituto de Investigaciones Elctricas. [Espanol] En este articulo se describe el objetivo de crear el sistema de programas de diseno de motores de induccion, Siprodimo, su alcance, sus caracteristicas generales, su estructura y los resultados obtenidos con su aplicacion, asi como la capacidad de servicio desarrollada por el area de motores, del Instituto de Investigaciones Electricas.

  8. Designing training programs for the development of emotional intelligence in adolescents with behavioral problems

    Directory of Open Access Journals (Sweden)

    A.V. Degtyarev

    2013-10-01

    Full Text Available In this article, deviant behavior is considered as a combination of different manifestations of personality, leading eventually to its social desaptation. It is shown that an effective method of preventing deviant behavior is psychological training. Group training activity helps to solve the problems associated with the development of various behavioral skills, to provide psychological support, and can be used as a means of psychological work with teenagers with behavioral problems. We discuss the basic points required to effectively create and conduct training programs in general, as well as the challenges and opportunities of designing trainings in order to develop emotional intelligence as a method of prevention of deviant behavior

  9. Third-order TRANSPORT: A computer program for designing charged particle beam transport systems

    International Nuclear Information System (INIS)

    Carey, D.C.; Brown, K.L.; Rothacker, F.

    1995-05-01

    TRANSPORT has been in existence in various evolutionary versions since 1963. The present version of TRANSPORT is a first-, second-, and third-order matrix multiplication computer program intended for the design of static-magnetic beam transport systems. This report discusses the following topics on TRANSPORT: Mathematical formulation of TRANSPORT; input format for TRANSPORT; summaries of TRANSPORT elements; preliminary specifications; description of the beam; physical elements; other transformations; assembling beam lines; operations; variation of parameters for fitting; and available constraints -- the FIT command

  10. An FPGA-Based PID Controller Design for Chaos Synchronization by Evolutionary Programming

    Directory of Open Access Journals (Sweden)

    Her-Terng Yau

    2011-01-01

    Full Text Available This paper is concerned with the design of a field programmable gate arrays- (FPGAs- based digital proportional-integral-derivative (PID controller for synchronization of a continuous chaotic model. By using the evolutionary programming (EP algorithm, optimal control gains in PID-controlled chaotic systems are derived such that a performance index of integrated absolute error (IAE is as minimal as possible. To verify the system performance, basic electronic components, including OPA resistor and capacitor elements, were used to implement the chaotic Sprott circuits, and FPGA technology was used to implement the proposed digital PID controller. Numerical and experimental results confirmed the effectiveness of the proposed synchronization procedure.

  11. Validation of a fracture mechanics approach to nuclear transportation cask design through a drop test program

    International Nuclear Information System (INIS)

    Sorenson, K.B.

    1986-01-01

    Sandia National Laboratories (SNL), under contract to the Department of Energy, is conducting a research program to develop and validate a fracture mechanics approach to cask design. A series of drop tests of a transportation cask is planned for the summer of 1986 as the method for benchmarking and, thereby, validating the fracture mechanics approach. This paper presents the drop test plan and background leading to the development of the test plan including structural analyses, material characterization, and non-destructive evaluation (NDE) techniques necessary for defining the test plan properly

  12. Third-order TRANSPORT: A computer program for designing charged particle beam transport systems

    Energy Technology Data Exchange (ETDEWEB)

    Carey, D.C. [Fermi National Accelerator Lab., Batavia, IL (United States); Brown, K.L.; Rothacker, F. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

    1995-05-01

    TRANSPORT has been in existence in various evolutionary versions since 1963. The present version of TRANSPORT is a first-, second-, and third-order matrix multiplication computer program intended for the design of static-magnetic beam transport systems. This report discusses the following topics on TRANSPORT: Mathematical formulation of TRANSPORT; input format for TRANSPORT; summaries of TRANSPORT elements; preliminary specifications; description of the beam; physical elements; other transformations; assembling beam lines; operations; variation of parameters for fitting; and available constraints -- the FIT command.

  13. Design and implementation of the control system for nuclear plant VVER-1000. Instrumentation (program technical complexes)

    International Nuclear Information System (INIS)

    Siora, A.; Tokarev, V.; Bakhmach, E.

    2004-01-01

    Program-technical complexes (PTC) are designed as control and protection systems in water-moderated atomic reactors, including emergency and preventive systems, automatic control, unloading, reactor capacity limitation and accelerated preventive protection systems. Utilization of programmable logic integrated circuits from world leading manufacturers makes the complexes simple in structure, compact, with low energy demands and mutually independent for key and supporting functions The results of PTC assessment and implementation in Ukraine are outlined. Opportunities for a future development of RADIJ company in the area of control and protection systems for VVER reactors are also discussed

  14. HTGR process heat program design and analysis. Final report, FY-79

    International Nuclear Information System (INIS)

    1979-12-01

    This report summarizes the results of concept design studies at General Atomic Company during FY-79 for an 842-MW(t) Very High Temperature Reactor (VHTR) utilizing an intermediate helium heat transfer loop to provide thermal energy for the production of hydrogen or reducing gas (H 2 + CO) by steam-reforming of a light hydrocarbon. Basic carbon sources may be coal, residual oil, or oil shale. The report summarizes conceptual design tasks conducted on the prestressed concrete reactor vessel, thermal barrier, intermediate heat exchanger, reformer, and steam generator. The substantial completion of first generation programming for a performance/optimization code and the preparation of a topical safety report and other safety evaluation studies are reported. The completion of balance of plant criteria specifications and a balance of plant cost estimate is also reported

  15. Improving human reliability through better nuclear power plant system design: Program for advanced nuclear power studies

    International Nuclear Information System (INIS)

    Golay, M.W.

    1993-01-01

    The project on ''Development of a Theory of the Dependence of Human Reliability upon System Designs as a Means of Improving Nuclear Power Plant Performance'' was been undertaken in order to address the problem of human error in advanced nuclear power plant designs. Lack of a mature theory has retarded progress in reducing likely frequencies of human errors. Work being pursued in this project is to perform a set of experiments involving human subjects who are required to operate, diagnose and respond to changes in computer-simulated systems, relevant to those encountered in nuclear power plants, which are made to differ in complexity in a systematic manner. The computer program used to present the problems to be solved also records the response of the operator as it unfolds

  16. Summary of particle bed reactor designs for the Space Nuclear Thermal Propulsion Program

    Science.gov (United States)

    Powell, J. R.; Ludewig, H.; Todosow, M.

    1993-09-01

    A summary report of the Particle Bed Reactor (PBR) designs considered for the space nuclear thermal propulsion program has been prepared. The first chapters outline the methods of analysis, and their validation. Monte Carlo methods are used for the physics analysis, several new algorithms are used for the fluid dynamics heat transfer and engine system analysis, and commercially available codes are used for the stress analysis. A critical experiment, prototypic of the PBR was used for the physics validation, and blowdown experiments using fuel beds of prototypic dimensions were used to validate the power extraction capabilities from particle beds. In all four different PBR rocket reactor designs were studied to varying degrees of detail. They varied in power from 400 MW to 2000 MW. These designs were all characterized by a negative prompt coefficient, due to Doppler feedback, and the feedback due to moderator heat up varied from slightly negative to slightly positive. In all practical cases, the coolant worth was positive, although core configurations with negative coolant worth could be designed. In all practical cases the thrust/weight ratio was greater than 20.

  17. A two-stage stochastic programming model for the optimal design of distributed energy systems

    International Nuclear Information System (INIS)

    Zhou, Zhe; Zhang, Jianyun; Liu, Pei; Li, Zheng; Georgiadis, Michael C.; Pistikopoulos, Efstratios N.

    2013-01-01

    Highlights: ► The optimal design of distributed energy systems under uncertainty is studied. ► A stochastic model is developed using genetic algorithm and Monte Carlo method. ► The proposed system possesses inherent robustness under uncertainty. ► The inherent robustness is due to energy storage facilities and grid connection. -- Abstract: A distributed energy system is a multi-input and multi-output energy system with substantial energy, economic and environmental benefits. The optimal design of such a complex system under energy demand and supply uncertainty poses significant challenges in terms of both modelling and corresponding solution strategies. This paper proposes a two-stage stochastic programming model for the optimal design of distributed energy systems. A two-stage decomposition based solution strategy is used to solve the optimization problem with genetic algorithm performing the search on the first stage variables and a Monte Carlo method dealing with uncertainty in the second stage. The model is applied to the planning of a distributed energy system in a hotel. Detailed computational results are presented and compared with those generated by a deterministic model. The impacts of demand and supply uncertainty on the optimal design of distributed energy systems are systematically investigated using proposed modelling framework and solution approach.

  18. 29 CFR 780.607 - “Primarily employed” in agriculture.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false âPrimarily employedâ in agriculture. 780.607 Section 780... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Agriculture and Livestock Auction Operations Under the Section 13(b)(13) Exemption Requirements...

  19. European contribution to heat exchanger design/performance: HTFS research and computer programs. Final report. [SCON4 and CEMP1

    Energy Technology Data Exchange (ETDEWEB)

    Lang, C.; Skrovanek, T.

    1979-01-01

    The performance of selected HTFS computer program in solving example heat exchanger design/performance situations is evaluated. In addition, the specific inputs required by the program are presented to give an idea of the amount of detail the user must supply concerning the heat transfer system. Comments on the versatility of each program and technical details necessary for running each program are also provided. The computer programs examined rate the performance of shell-and-tube type condensers and plate-fin heat exchangers.

  20. Columbia Estuary Ecosystem Restoration Program: Restoration Design Challenges for Topographic Mounds, Channel Outlets, and Reed Canarygrass

    Energy Technology Data Exchange (ETDEWEB)

    Diefenderfer, Heida L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Borde, Amy B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sinks, Ian A. [Columbia Land Trust, Vancouver, WA (United States); Cullinan, Valerie I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zimmerman, Shon A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-31

    The purpose of this study was to provide science-based information to practitioners and managers of restoration projects in the Columbia Estuary Ecosystem Restoration Program (CEERP) regarding aspects of restoration techniques that currently pose known challenges and uncertainties. The CEERP is a program of the Bonneville Power Administration (BPA) and the U.S. Army Corps of Engineers (Corps), Portland District, in collaboration with the National Marine Fisheries Service and five estuary sponsors implementing restoration. The estuary sponsors are Columbia Land Trust, Columbia River Estuary Study Taskforce, Cowlitz Tribe, Lower Columbia Estuary Partnership, and Washington Department of Fish and Wildlife. The scope of the research conducted during federal fiscal year 2015 included three aspects of hydrologic reconnection that were selected based on available scientific information and feedback from restoration practitioners during project reviews: the design of mounds (also called hummocks, peninsulas, or berms); the control of reed canarygrass (Phalaris arundinaceae); and aspects of channel network design related to habitat connectivity for juvenile salmonids.

  1. Hybrid wheat: quantitative genetic parameters and consequences for the design of breeding programs.

    Science.gov (United States)

    Longin, Carl Friedrich Horst; Gowda, Manje; Mühleisen, Jonathan; Ebmeyer, Erhard; Kazman, Ebrahim; Schachschneider, Ralf; Schacht, Johannes; Kirchhoff, Martin; Zhao, Yusheng; Reif, Jochen Christoph

    2013-11-01

    Commercial heterosis for grain yield is present in hybrid wheat but long-term competiveness of hybrid versus line breeding depends on the development of heterotic groups to improve hybrid prediction. Detailed knowledge of the amount of heterosis and quantitative genetic parameters are of paramount importance to assess the potential of hybrid breeding. Our objectives were to (1) examine the extent of midparent, better-parent and commercial heterosis in a vast population of 1,604 wheat (Triticum aestivum L.) hybrids and their parental elite inbred lines and (2) discuss the consequences of relevant quantitative parameters for the design of hybrid wheat breeding programs. Fifteen male lines were crossed in a factorial mating design with 120 female lines, resulting in 1,604 of the 1,800 potential single-cross hybrid combinations. The hybrids, their parents, and ten commercial wheat varieties were evaluated in multi-location field experiments for grain yield, plant height, heading time and susceptibility to frost, lodging, septoria tritici blotch, yellow rust, leaf rust, and powdery mildew at up to five locations. We observed that hybrids were superior to the mean of their parents for grain yield (10.7 %) and susceptibility to frost (-7.2 %), leaf rust (-8.4 %) and septoria tritici blotch (-9.3 %). Moreover, 69 hybrids significantly (P hybrid wheat breeding. The estimated quantitative genetic parameters suggest that the establishment of reciprocal recurrent selection programs is pivotal for a successful long-term hybrid wheat breeding.

  2. Designing text-messaging (SMS) in HIV programs: ethics-framed recommendations from the field.

    Science.gov (United States)

    Pérez, Guillermo Martínez; Hwang, Bella; Bygrave, Helen; Venables, Emilie

    2015-01-01

    Text messages (SMS) are being increasingly integrated into HIV programs across Southern Africa to improve patient adherence, linkage to care and provide psycho-social support. Careful attention needs to be paid to the design of SMS-based interventions for clients of HIV-care services to ensure that any potential harm, such as unwanted disclosure of HIV status, is minimized. In this article we propose a set of best practice recommendations to ensure that any SMS-based intervention considers ethical principles to safeguard safety, autonomy and confidentiality of its targeted HIV-positive beneficiaries. This analysis draws from our operational experience in Southern Africa in the design and conduct of mHealth interventions in the frame of HIV projects. The recommendations, framed in the context of the Belmont Report's three ethical pillars, may contribute to more safely operationalize any SMS service integrated into an HIV program if adopted by mHealth planners and implementers. We encourage actors to report on the ethical and methodological pathways followed when conducting SMS-based innovations to improve the wellbeing and quality provision of HIV-care for their targeted clients.

  3. Grid-Optimization Program for Photovoltaic Cells

    Science.gov (United States)

    Daniel, R. E.; Lee, T. S.

    1986-01-01

    CELLOPT program developed to assist in designing grid pattern of current-conducting material on photovoltaic cell. Analyzes parasitic resistance losses and shadow loss associated with metallized grid pattern on both round and rectangular solar cells. Though performs sensitivity studies, used primarily to optimize grid design in terms of bus bar and grid lines by minimizing power loss. CELLOPT written in APL.

  4. Exploratory research for the development of a computer aided software design environment with the software technology program

    Science.gov (United States)

    Hardwick, Charles

    1991-01-01

    Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

  5. Macau, World Capital for Gambling: A Longitudinal Study of a Youth Program Designed to Instill Positive Values

    Science.gov (United States)

    Luk, Andrew L.; Chan, W. U.; Hu, Sydney X. X.

    2013-01-01

    This study investigated the effectiveness of a positive youth development program for Chinese Secondary 3 students in two schools, who had been followed up since their entry to Secondary 1. A mixed research method was carried out using a pre- and post-test pre-experimental design and a focus group for the participants. The subjective outcome evaluations included participants’ perceptions of the program, program instructors, benefits of the program and overall satisfaction, and were positive. The longitudinal data from the objective outcome evaluation showed some notable improvements, and the overall effect of the program was also found to be positive for newcomers in the junior secondary years. The focus group interviews revealed mostly positive feedback in terms of the students’ general impressions of the program, with the majority of participants perceiving benefits to themselves from the program. The findings offer positive evidence of the effectiveness of the program. PMID:24350227

  6. ARDOSE: a PC program for stack design and the PRR-1 41Ar effluent

    International Nuclear Information System (INIS)

    Leopando, L.S.

    1994-01-01

    General atomics (GA) calculated the rate of release of 41 Ar in the safety analysis report it prepared for TRIGA conversion of the PRR-1 (TR-86-01, 1987), and PNRI attempted to calculate the exposure dose to the public from the rate of release and meteorological data for the reactor site (Palattao et al., 1989) The former calculation is not completely applicable now, because the physical configurations of the irradiation facilities and ventilation system have changed. The result of the latter calculation is in doubt because the 41 Ar release rate it claimed to use is not in agreement with TR-86-01, 1987. AR DOSE was written to replace both of these calculations with one program for the PC. AR DOSE is a companion program to DBA DOSE (The Nucleus, 1989), a program written to calculate the exposure dose from the release of fission products during the design basis accident (DBA). The PRR-1 uses the same stack for DBA release as for the routine release of 41 Ar elluent. The source code of AR DOSE contains approximately 1100 lines of FORTRAN-77 (written for the Microsoft Fortran 4.10 compiler) and 300 lines of Assembler. AR D OSE.EXE is only 50 kB in size and needs only about 54 kB of RAM to run. A math-coprocessor is not needed but will speed up runs considerably. 7 refs., 1 tab

  7. Nanocommunication design in graduate-level education and research training programs at Osaka University

    Science.gov (United States)

    Sekiya, Mizuki; An, SoonHwa; Ata, Masafumi

    2014-09-01

    After more than ten years of strategic investment research and development supported by government policies on science and technology, nanotechnology in Japan is making a transition from the knowledge creation stage of exploratory research to the stage of making the outcomes available for the benefit of society as a whole. Osaka University has been proactive in discussions about the relationship between nanotechnology and society as part of graduate and continuing education programs. These programs are intended to fulfill the social accountability obligation of scientists and corporations involved in R&D, and to deepen their understanding of the relationship between science and society. To meet those aims, the program has covered themes relating to overall public engagement relating to nanotechnology governance, such as risk management of nanomaterials, international standardization for nanotechnology, nanomeasurement, intellectual property management in an open innovation environment, and interactive communication with society. Nanotechnology is an emerging field of science and technology. This paper reports and comments on initiatives for public engagement on nanotechnology at Osaka University's Institute for NanoScience Design, which aims to create new technologies based on nanotechnology that can help realize a sustainable society.

  8. Western states enhanced oil shale recovery program: Shale oil production facilities conceptual design studies report

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    This report analyzes the economics of producing syncrude from oil shale combining underground and surface processing using Occidental's Modified-In-Situ (MIS) technology and Lawrence Livermore National Laboratory's (LLNL) Hot Recycled Solids (HRS) retort. These retorts form the basic technology employed for oil extraction from oil shale in this study. Results are presented for both Commercial and Pre-commercial programs. Also analyzed are Pre-commercialization cost of Demonstration and Pilot programs which will confirm the HRS and MIS concepts and their mechanical designs. These programs will provide experience with the circulating Fluidized Bed Combustor (CFBC), the MIS retort, the HRS retort and establish environmental control parameters. Four cases are considered: commercial size plant, demonstration size plant, demonstration size plant minimum CFBC, and a pilot size plant. Budget cost estimates and schedules are determined. Process flow schemes and basic heat and material balances are determined for the HRS system. Results consist of summaries of major equipment sizes, capital cost estimates, operating cost estimates and economic analyses. 35 figs., 35 tabs.

  9. Design Considerations in Development of a Mobile Health Intervention Program: The TEXT ME and TEXTMEDS Experience.

    Science.gov (United States)

    Thakkar, Jay; Barry, Tony; Thiagalingam, Aravinda; Redfern, Julie; McEwan, Alistair L; Rodgers, Anthony; Chow, Clara K

    2016-11-15

    Mobile health (mHealth) has huge potential to deliver preventative health services. However, there is paucity of literature on theoretical constructs, technical, practical, and regulatory considerations that enable delivery of such services. The objective of this study was to outline the key considerations in the development of a text message-based mHealth program; thus providing broad recommendations and guidance to future researchers designing similar programs. We describe the key considerations in designing the intervention with respect to functionality, technical infrastructure, data management, software components, regulatory requirements, and operationalization. We also illustrate some of the potential issues and decision points utilizing our experience of developing text message (short message service, SMS) management systems to support 2 large randomized controlled trials: TEXT messages to improve MEDication adherence & Secondary prevention (TEXTMEDS) and Tobacco, EXercise and dieT MEssages (TEXT ME). The steps identified in the development process were: (1) background research and development of the text message bank based on scientific evidence and disease-specific guidelines, (2) pilot testing with target audience and incorporating feedback, (3) software-hardware customization to enable delivery of complex personalized programs using prespecified algorithms, and (4) legal and regulatory considerations. Additional considerations in developing text message management systems include: balancing the use of customized versus preexisting software systems, the level of automation versus need for human inputs, monitoring, ensuring data security, interface flexibility, and the ability for upscaling. A merging of expertise in clinical and behavioral sciences, health and research data management systems, software engineering, and mobile phone regulatory requirements is essential to develop a platform to deliver and manage support programs to hundreds of

  10. Comparing unilateral and bilateral upper limb training: The ULTRA-stroke program design

    Directory of Open Access Journals (Sweden)

    Koppe Peter

    2009-11-01

    Full Text Available Abstract Background About 80% of all stroke survivors have an upper limb paresis immediately after stroke, only about a third of whom (30 to 40% regain some dexterity within six months following conventional treatment programs. Of late, however, two recently developed interventions - constraint-induced movement therapy (CIMT and bilateral arm training with rhythmic auditory cueing (BATRAC - have shown promising results in the treatment of upper limb paresis in chronic stroke patients. The ULTRA-stroke (acronym for Upper Limb TRaining After stroke program was conceived to assess the effectiveness of these interventions in subacute stroke patients and to examine how the observed changes in sensori-motor functioning relate to changes in stroke recovery mechanisms associated with peripheral stiffness, interlimb interactions, and cortical inter- and intrahemispheric networks. The present paper describes the design of this single-blinded randomized clinical trial (RCT, which has recently started and will take several years to complete. Methods/Design Sixty patients with a first ever stroke will be recruited. Patients will be stratified in terms of their remaining motor ability at the distal part of the arm (i.e., wrist and finger movements and randomized over three intervention groups receiving modified CIMT, modified BATRAC, or an equally intensive (i.e., dose-matched conventional treatment program for 6 weeks. Primary outcome variable is the score on the Action Research Arm test (ARAT, which will be assessed before, directly after, and 6 weeks after the intervention. During those test sessions all patients will also undergo measurements aimed at investigating the associated recovery mechanisms using haptic robots and magneto-encephalography (MEG. Discussion ULTRA-stroke is a 3-year translational research program which aims (1 to assess the relative effectiveness of the three interventions, on a group level but also as a function of patient

  11. Third-Order Transport with MAD Input: A Computer Program for Designing Charged Particle Beam Transport Systems

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Karl

    1998-10-28

    TRANSPORT has been in existence in various evolutionary versions since 1963. The present version of TRANSPORT is a first-, second-, and third-order matrix multiplication computer program intended for the design of static-magnetic beam transport systems.

  12. Effects of a Specifically Designed Physical Conditioning Program on the Load Carriage and Lifting Performance of Female Soldiers

    National Research Council Canada - National Science Library

    Harman, Everett

    1997-01-01

    Forty-six women were studied to determine whether their ability to perform 'very heavy' Army jobs could be improved by a specially designed 24-week physical training program administered within normal...

  13. DUKSUP: A Computer Program for High Thrust Launch Vehicle Trajectory Design and Optimization

    Science.gov (United States)

    Spurlock, O. Frank; Williams, Craig H.

    2015-01-01

    From the late 1960s through 1997, the leadership of NASAs Intermediate and Large class unmanned expendable launch vehicle projects resided at the NASA Lewis (now Glenn) Research Center (LeRC). One of LeRCs primary responsibilities --- trajectory design and performance analysis --- was accomplished by an internally-developed analytic three dimensional computer program called DUKSUP. Because of its Calculus of Variations-based optimization routine, this code was generally more capable of finding optimal solutions than its contemporaries. A derivation of optimal control using the Calculus of Variations is summarized including transversality, intermediate, and final conditions. The two point boundary value problem is explained. A brief summary of the codes operation is provided, including iteration via the Newton-Raphson scheme and integration of variational and motion equations via a 4th order Runge-Kutta scheme. Main subroutines are discussed. The history of the LeRC trajectory design efforts in the early 1960s is explained within the context of supporting the Centaur upper stage program. How the code was constructed based on the operation of the AtlasCentaur launch vehicle, the limits of the computers of that era, the limits of the computer programming languages, and the missions it supported are discussed. The vehicles DUKSUP supported (AtlasCentaur, TitanCentaur, and ShuttleCentaur) are briefly described. The types of missions, including Earth orbital and interplanetary, are described. The roles of flight constraints and their impact on launch operations are detailed (such as jettisoning hardware on heating, Range Safety, ground station tracking, and elliptical parking orbits). The computer main frames on which the code was hosted are described. The applications of the code are detailed, including independent check of contractor analysis, benchmarking, leading edge analysis, and vehicle performance improvement assessments. Several of DUKSUPs many major impacts on

  14. [Assessment of patient needs to design a patient education program in systemic lupus erythematosus].

    Science.gov (United States)

    Hervier, B; Devilliers, H; Amiour, F; Ayçaguer, S; Neves, Y; Ganem, M-C; Amoura, Z; Antignac, M

    2014-05-01

    The aim of this study was to collect information to design a patient education program (PEP) for patients with systemic lupus erythematosus (SLE), based as much as possible on their expectations. Three different approaches were used for addressing patients' needs: 1) A questionnaire on their expectations in terms of a PEP was sent to the members of SLE associations and offered to patients at the French reference center for SLE, 2) A patients' focus group was conducted, and 3) After the teaching sessions, satisfaction questionnaires were also evaluated. The patients who answered the expectation questionnaire (n=422, women/men sex-ratio: 12.6) indicated a major interest in the PEP (70.4%). Their expectations were broad, and covered the topics of pregnancy (90% of the women under the age of 40), the outcome of the disease (80.8%), the respective roles of the different treatments (70.4%), and also the management of everyday symptoms: fatigue and pain (66.4%). The focus group (eight people) highlighted the need for improving how the diagnosis of the disease was delivered, and also revealed the loneliness and the guilty feeling experienced by some patients toward their relatives. Satisfaction questionnaires confirmed these expectations for the PEP, and even extended them to new topics: the mechanisms behind SLE, travel and leisure, and possible accommodations in the workplace. The direct consultation of patients with SLE targeted by a specific PEP program allowed us to confirm and adapt the topics and the content of a program designed by medical staff. Copyright © 2013 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

  15. Multi-objective genetic algorithm for solving N-version program design problem

    International Nuclear Information System (INIS)

    Yamachi, Hidemi; Tsujimura, Yasuhiro; Kambayashi, Yasushi; Yamamoto, Hisashi

    2006-01-01

    N-version programming (NVP) is a programming approach for constructing fault tolerant software systems. Generally, an optimization model utilized in NVP selects the optimal set of versions for each module to maximize the system reliability and to constrain the total cost to remain within a given budget. In such a model, while the number of versions included in the obtained solution is generally reduced, the budget restriction may be so rigid that it may fail to find the optimal solution. In order to ameliorate this problem, this paper proposes a novel bi-objective optimization model that maximizes the system reliability and minimizes the system total cost for designing N-version software systems. When solving multi-objective optimization problem, it is crucial to find Pareto solutions. It is, however, not easy to obtain them. In this paper, we propose a novel bi-objective optimization model that obtains many Pareto solutions efficiently. We formulate the optimal design problem of NVP as a bi-objective 0-1 nonlinear integer programming problem. In order to overcome this problem, we propose a Multi-objective genetic algorithm (MOGA), which is a powerful, though time-consuming, method to solve multi-objective optimization problems. When implementing genetic algorithm (GA), the use of an appropriate genetic representation scheme is one of the most important issues to obtain good performance. We employ random-key representation in our MOGA to find many Pareto solutions spaced as evenly as possible along the Pareto frontier. To pursue improve further performance, we introduce elitism, the Pareto-insertion and the Pareto-deletion operations based on distance between Pareto solutions in the selection process. The proposed MOGA obtains many Pareto solutions along the Pareto frontier evenly. The user of the MOGA can select the best compromise solution among the candidates by controlling the balance between the system reliability and the total cost

  16. NEEMA: a school-based diabetes risk prevention program designed for African-American children.

    Science.gov (United States)

    Shaw-Perry, Mary; Horner, Charlotte; Treviño, Roberto P; Sosa, Erica T; Hernandez, Irene; Bhardwaj, Abhishek

    2007-04-01

    To conduct formative assessment and preliminary biological impact of a school-based diabetes risk prevention program for African-American children during a 14-week study. NEEMA is a school-based diabetes prevention program tailored for African-American children. The NEEMA is implemented via four social networks-classroom (Health and Physical Education Class), after school (Health Club), home (Family Fun Fair) and school cafeteria (Food Service Program). Formative assessment data were collected through semistructured interviews with physical education (PE) teachers and a pre-to-post design was used to measure biological impact. Fasting capillary glucose, height, weight, body mass index, percent body fat and fitness data were collected from a sample of 58 fourth-grade students. The six elementary schools had > 40% African-American enrollment and were located in low-income neighborhoods. Face-to-face interview data revealed diabetes, obesity and food insufficiency as major health concerns among PE teachers. Teachers also cited large classes and short PE periods as major challenges for implementing the program. From baseline to follow-up, fitness laps increased from 16.40 (SD = 9.98) to 23.72 (SD = 14.79) (p fasting capillary glucose decreased from 89.17 mg/dl (SD = 10.05) to 83.50 mg/dl (SD = 11.26) (p < 0.000), and percent body fat decreased from 27.26 (SD=12.89) to 26.68 (SD = 11.67) (p < 0.537). The NEEMA pilot study provided teacher feedback useful for revising the NEEMA health curricula and positive preliminary impact of the NEEMA PE class on children's fitness and blood glucose levels.

  17. ACT-CCREC Core Research Program: Study Questions and Design. ACT Working Paper Series. WP-2015-01

    Science.gov (United States)

    Cruce, Ty M.

    2015-01-01

    This report provides a non-technical overview of the guiding research questions and research design for the ACT-led core research program conducted on behalf of the GEAR UP College and Career Readiness Evaluation Consortium (CCREC). The core research program is a longitudinal study of the effectiveness of 14 GEAR UP state grants on the academic…

  18. The Design and Pilot Evaluation of an Interactive Learning Environment for Introductory Programming Influenced by Cognitive Load Theory and Constructivism

    Science.gov (United States)

    Moons, Jan; De Backer, Carlos

    2013-01-01

    This article presents the architecture and evaluation of a novel environment for programming education. The design of this programming environment, and the way it is used in class, is based on the findings of constructivist and cognitivist learning paradigms. The environment is evaluated based on qualitative student and teacher evaluations and…

  19. Learning Program for Enhancing Visual Literacy for Non-Design Students Using a CMS to Share Outcomes

    Science.gov (United States)

    Ariga, Taeko; Watanabe, Takashi; Otani, Toshio; Masuzawa, Toshimitsu

    2016-01-01

    This study proposes a basic learning program for enhancing visual literacy using an original Web content management system (Web CMS) to share students' outcomes in class as a blog post. It seeks to reinforce students' understanding and awareness of the design of visual content. The learning program described in this research focuses on to address…

  20. Design and Development of a Sample "Computer Programming" Course Tool via Story-Based E-Learning Approach

    Science.gov (United States)

    Kose, Utku; Koc, Durmus; Yucesoy, Suleyman Anil

    2013-01-01

    This study introduces a story-based e-learning oriented course tool that was designed and developed for using within "computer programming" courses. With this tool, students can easily adapt themselves to the subjects in the context of computer programming principles, thanks to the story-based, interactive processes. By using visually…

  1. Promoting Health-Related Fitness for Elementary Students with Intellectual Disabilities through a Specifically Designed Activity Program

    Science.gov (United States)

    Davis, Kathryn; Zhang, Guili; Hodson, Patricia

    2011-01-01

    The Motivate, Adapt, and Play Program was specifically designed as an adapted physical activity (PA) program for students with intellectual disabilities (ID) to meet required school PA policies to combat childhood obesity. The policies commonly require a minimum of 30 min of PA per school day. A study was undertaken to test the efficacy of the…

  2. Revision of Electro-Mechanical Drafting Program to Include CAD/D (Computer-Aided Drafting/Design). Final Report.

    Science.gov (United States)

    Snyder, Nancy V.

    North Seattle Community College decided to integrate computer-aided design/drafting (CAD/D) into its Electro-Mechanical Drafting Program. This choice necessitated a redefinition of the program through new curriculum and course development. To initiate the project, a new industrial advisory council was formed. Major electronic and recruiting firms…

  3. An Integer-Programming Approach to Item Pool Design. Law School Admission Council Computerized Testing Report. LSAC Research Report Series.

    Science.gov (United States)

    van der Linden, Wim J.; Veldkamp, Bernard P.; Reese, Lynda M.

    Presented is an integer-programming approach to item pool design that can be used to calculate an optimal blueprint for an item pool to support an existing testing program. The results are optimal in the sense that they minimize the efforts involved in actually producing the items as revealed by current item writing patterns. Also presented is an…

  4. On the Design of Education Conditional Cash Transfer Programs and non Education Outcomes: The Case of Teenage Pregnancy

    OpenAIRE

    Darwin Cortés; Juan Gallego; Darío Maldonado

    2011-01-01

    We investigate the effect of education Conditional Cash Transfer programs (CCTs) on teenage pregnancy. Our main concern is with how the size and sign of the effect may depend on the design of the program. Using a simple model we show that an education CCT that conditions renewal on school performance reduces teenage pregnancy; the program can increase teenage pregnancy if it does not condition on school performance. Then, using an original data base, we estimate the causal impact on teenage p...

  5. The Design of Akhmat Tower

    Directory of Open Access Journals (Sweden)

    Beardsley Sara

    2018-01-01

    Full Text Available Akhmat Tower is a 435m supertall building designed by Adrian Smith + Gordon Gill Architecture. It is currently under construction in the city of Grozny, in the Chechen Republic, in the North Caucasus region of Russia. The design of the tower was done during a collaborative process by a multi-disciplinary architectural and engineering team, based primarily in the United States and Russia. During this process, the designers considered many factors including, most primarily, the cultural and historical context, the structural requirements given the high seismicity of the region, and the client’s programmatic needs. The resulting crystalline-shaped tower is both an aesthetic statement and a performative architectural solution which will be a new landmark for Chechnya. “The Design of Akhmat Tower” describes in detail the design process including structural considerations, exterior wall design, building program, interior design, the tuned mass damper, and the use of building information modeling.

  6. The Design of Akhmat Tower

    Science.gov (United States)

    Beardsley, Sara; Stochetti, Alejandro; Cerone, Marc

    2018-03-01

    Akhmat Tower is a 435m supertall building designed by Adrian Smith + Gordon Gill Architecture. It is currently under construction in the city of Grozny, in the Chechen Republic, in the North Caucasus region of Russia. The design of the tower was done during a collaborative process by a multi-disciplinary architectural and engineering team, based primarily in the United States and Russia. During this process, the designers considered many factors including, most primarily, the cultural and historical context, the structural requirements given the high seismicity of the region, and the client's programmatic needs. The resulting crystalline-shaped tower is both an aesthetic statement and a performative architectural solution which will be a new landmark for Chechnya. "The Design of Akhmat Tower" describes in detail the design process including structural considerations, exterior wall design, building program, interior design, the tuned mass damper, and the use of building information modeling.

  7. Design and implementation of a computer based site operations log for the ARM Program

    International Nuclear Information System (INIS)

    Tichler, J.L.; Bernstein, H.J.; Bobrowski, S.F.; Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Singley, P.T.

    1992-01-01

    The Atmospheric Radiation Measurement (ARM) Program is a Department of Energy (DOE) research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and solar radiation. ARM will provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing of parameterizations of the processes for use in atmospheric models. The design of the testbed known as the Clouds and Radiation Testbed (CART), calls for five, long-term field data collection sites. The first site, located in the Southern Great Plains (SGP) in Lamont, OK began operation in the spring of 1992. The CART Data Environment (CDE) is the element of the testbed which acquires the basic observations from the instruments and processes them to meet the ARM requirements. A formal design was used to develop a description of the logical requirements for the CDE. This paper discusses the design and prototype implementation of a part of the CDE known as the site operations log, which records metadata defining the environment within which the data produced by the instruments is collected

  8. Design of the CART data system for the US Department of Energy's ARM Program

    International Nuclear Information System (INIS)

    Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Tichler, J.L.

    1991-01-01

    The Department of Energy (DOE) has initiated a major atmospheric research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and radiation. The objective of the Atmospheric Radiation Measurement Program (ARM) is to provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing parameterizations of the processes for use in atmospheric models. This experimental testbed, known as the Clouds and Radiation Testbed (CART), will include a complex data system, the CART Data Environment (CDE). The major functions of the CDE will be to: acquire environments from instruments and external data sources; perform quality assessments of the data streams; create data streams of known quality to be used as model input compared to model output; execute the models and capture their predictions; and make data streams associated with model tests available to ARM investigators in near real-time. The CDE will also be expected to capture ancillary information (''meta-data'') associated with the data streams, provide data management facilities for design of ARM experiments, and provide for archival data storage. The first section of this paper presents background information on CART. Next the process for the functional design of the system is described, the functional requirements summarized, and the conceptual architecture of the CDE is presented. Finally, the status of the CDE design activities is summarized, and major technical challenges are discussed

  9. Three Levels of Planned eLearning Interactions: A Framework for Grounding Research and the Design of eLearning Programs

    Science.gov (United States)

    Hirumi, Atsusi

    2013-01-01

    Advances in technology offer a vast array of opportunities for facilitating elearning. However, difficulties may arise if elearning research and design, including the use of emerging technologies, are based primarily on past practices, fads, or political agendas. This article describes refinements made to a framework for designing and sequencing…

  10. Structured Parallel Programming Patterns for Efficient Computation

    CERN Document Server

    McCool, Michael; Robison, Arch

    2012-01-01

    Programming is now parallel programming. Much as structured programming revolutionized traditional serial programming decades ago, a new kind of structured programming, based on patterns, is relevant to parallel programming today. Parallel computing experts and industry insiders Michael McCool, Arch Robison, and James Reinders describe how to design and implement maintainable and efficient parallel algorithms using a pattern-based approach. They present both theory and practice, and give detailed concrete examples using multiple programming models. Examples are primarily given using two of th

  11. The application of parameters for comprehensive smile esthetics by digital smile design programs: A review of literature

    Directory of Open Access Journals (Sweden)

    Doya Omar

    2018-01-01

    Full Text Available Cosmetic dentistry is increasingly becoming an issue of concern to patients who hope to improve their smile. A systematic and comprehensive dentofacial analysis must be performed before commencing esthetic treatment. Several computer software programs have been developed for digital smile design (DSD to assist clinicians in this process. This article compares DSD programs commonly used in cosmetic dentistry and their ability to assess esthetic parameters. A literature review was performed of current dentofacial aesthetic parameters and clinical applications of computer technology to assess facial, dentogingival and dental esthetics. Eight DSD programs (Photoshop CS6, Keynote, Planmeca Romexis Smile Design, Cerec SW 4.2, Aesthetic Digital Smile Design, Smile Designer Pro, DSD App and VisagiSMile were compared. Photoshop, Keynote and Aesthetic Digital Smile Design included the largest number of esthetic analysis parameters. Other studied DSD programs presented deficiencies in their ability to analyze facial esthetic parameters but included comprehensive dentogingival and dental esthetic functions. The DSD App, Planmeca Romexis Smile Design, and Cerec SW 4.2 were able to perform 3D analysis; furthermore, Cerec SW 4.2 and PRSD could be used jointly with CAD/CAM. The DSD App and Smile Designer Pro are available as mobile phone applications. It can be concluded that despite the fact that they were not specifically designed for dental diagnosis, Photoshop CS6 and Keynote provide a more comprehensive smile analysis than most specialized DSD programs. However, other program functions should also be considered when deciding which DSD program is applicable to individual clinical setups.

  12. Design Process Components and Perceived Product Quality : Can a Design Education Program Contribute to better Product Quality?

    NARCIS (Netherlands)

    Kok, B.N.E.

    2016-01-01

    In this PhD research the design process components that can contribute to a better perceived product quality are studied. First the design process components are determined. Secondly the effect of these components on the perceived quality is studied. This research is mainly based on design processes

  13. Understanding Computational Thinking before Programming: Developing Guidelines for the Design of Games to Learn Introductory Programming through Game-Play

    Science.gov (United States)

    Kazimoglu, Cagin; Kiernan, Mary; Bacon, Liz; MacKinnon, Lachlan

    2011-01-01

    This paper outlines an innovative game-based approach to learning introductory programming that is grounded in the development of computational thinking at an abstract conceptual level, but also provides a direct contextual relationship between game-play and learning traditional introductory programming. The paper proposes a possible model for,…

  14. STEM after School: How to Design and Run Great Programs and Activities. A Guidebook for Program Leaders, Second Edition

    Science.gov (United States)

    ExpandED Schools, 2014

    2014-01-01

    This guidebook was prepared by TASC (The After-School Corporation) and their Frontiers in Urban Science Education (FUSE) programs. FUSE is TASC's initiative to help more out-of-school-time programs and expanded learning time schools offer kids engaging, exciting and inspiring activities that promote science inquiry. The guidebook offers a a…

  15. Computer program design specifications for the Balloon-borne Ultraviolet Stellar Spectrometer (BUSS) science data decommutation program (BAPS48)

    Science.gov (United States)

    Rodriguez, R. M.

    1975-01-01

    The Balloon-Borne Ultraviolet Stellar Spectrometer (BUSS) Science Data Docummutation Program (BAPS48) is a pulse code modulation docummutation program that will format the BUSS science data contained on a one inch PCM tracking tape into a seven track serial bit stream formatted digital tape.

  16. Expedited Programs for Serious Conditions: An Update on Breakthrough Therapy Designation.

    Science.gov (United States)

    Kwok, Martin; Foster, Theresa; Steinberg, Michael

    2015-09-01

    Our aim was to describe the regulatory pathways made available by the US Food and Drug Administration (FDA) to expedite the drug development and approval process, with a focus on the benefits and limitations of the Breakthrough Therapy Designation (BTD) pathway. Published materials consisting of journal articles, press releases, government documents, and news articles from pharmaceutical publishers were identified through online databases (ie, Medline and Scopus), the FDA website, and Internet search engines (eg, Google). To encourage pharmaceutical innovation and increase the number of products being approved each year, the FDA has introduced 4 expedited regulatory pathways to accelerate the drug development and approval process. The most recent program, enacted in July 2012, was BTD that is given to drugs that treat a serious or life-threatening disease or condition; and preliminary clinical evidence suggests the potential for these drugs to provide a substantial improvement over the current standard of care. The primary basis for the creation of BTD is to provide patients with serious conditions with earlier access to FDA-approved medications. In 2014, 22% of the new molecular entities approved within the Center for Drug Evaluation and Research had BTD status, as opposed to only 11% in 2013, which indicates both the popularity and success of this expedited pathway. Additionally, the creation of BTD has produced a more collaborative working relationship between the pharmaceutical industry and the FDA because both parties have a vested interest in the drug's success. Some of the more notable concerns surrounding these approved breakthrough therapies have been the abbreviated tolerability and efficacy evidence available from accelerated clinical development programs, ensuring the manufacturing aspects keep pace with these accelerated clinical programs, and finally, managing the strain on resources for both the pharmaceutical companies and the FDA. BTD has already

  17. Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report summarizes the tasks completed under this project during the period from August 1, 1994 through July 31, 1994. The objective of the study is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized by the year 2000. The tasks completed include a market study for the advanced turbine system; definition of an optimized recuperated gas turbine as the prime mover meeting the requirements of the market study and whose characteristics were, in turn, used for forecasting the total advanced turbine system (ATS) future demand; development of a program plan for bringing the ATS to a state of readiness for field test; and demonstration of the primary surface recuperator ability to provide the high thermal effectiveness and low pressure loss required to support the proposed ATS cycle.

  18. Linkage between site characterization program and performance and design data needs

    International Nuclear Information System (INIS)

    Blanchard, M.B.; Dobson, D.C.; Younker, J.L.; Voegele, M.D.

    1990-01-01

    The basis for identifying site-specific data needs for the Yucca Mountain site was a thorough review and evaluation of the regulatory requirements for a geologic repository. The US Nuclear Regulatory Commission's (NRC) regulation governing disposal of high-level waste in a geologic repository utilizes a multiple barrier approach that includes reliance on both engineered and natural elements. Given an understanding of the regulatory requirements, the next step was to identify the natural features of the site and the components of the engineered barriers considered most likely to make significant contributions to isolation of waste at Yucca Mountain. The intent was to develop a site testing program that focused on understanding those natural site characteristics and processes most likely to contribute to waste isolation; and providing site data necessary to design and assess the performance of engineered barriers. 3 refs., 3 figs

  19. Gas reactor international cooperative program interim report: German Pebble Bed Reactor design and technology review

    International Nuclear Information System (INIS)

    1978-09-01

    This report describes and evaluates several gas-cooled reactor plant concepts under development within the Federal Republic of Germany (FRG). The concepts, based upon the use of a proven Pebble Bed Reactor (PBR) fuel element design, include nuclear heat generation for chemical processes and electrical power generation. Processes under consideration for the nuclear process heat plant (PNP) include hydrogasification of coal, steam gasification of coal, combined process, and long-distance chemical heat transportation. The electric plant emphasized in the report is the steam turbine cycle (HTR-K), although the gas turbine cycle (HHT) is also discussed. The study is a detailed description and evaluation of the nuclear portion of the various plants. The general conclusions are that the PBR technology is sound and that the HTR-K and PNP plant concepts appear to be achievable through appropriate continuing development programs, most of which are either under way or planned

  20. TRANSPORT: a computer program for designing charged particle beam transport systems

    International Nuclear Information System (INIS)

    Brown, K.L.; Rothacker, F.; Carey, D.C.; Iselin, C.

    1977-05-01

    TRANSPORT is a first- and second-order matrix multiplication computer program intended for the design of static-magnetic beam transport systems. It has been in existence in various evolutionary versions since 1963. The present version, described in the manual given, includes both first- and second-order fitting capabilities. TRANSPORT will step through the beam line, element by element, calculating the properties of the beam or other quantities, described below, where requested. Therefore one of the first elements is a specification of the phase space region occupied by the beam entering the system. Magnets and intervening spaces and other elements then follow in the sequence in which they occur in the beam line. Specifications of calculations to be done or of configurations other than normal are placed in the same sequence, at the point where their effect is to be made

  1. A mathematical programming framework for early stage design of wastewater treatment plants

    DEFF Research Database (Denmark)

    Bozkurt, Hande; Quaglia, Alberto; Gernaey, Krist

    2015-01-01

    The increasing number of alternative wastewater treatment technologies and stricter effluent requirements make the optimal treatment process selection for wastewater treatment plant design a complicated problem. This task, defined as wastewater treatment process synthesis, is currently based...... on expert decisions and previous experiences. This paper proposes a new approach based on mathematical programming to manage the complexity of the problem. The approach generates/identifies novel and optimal wastewater treatment process selection, and the interconnection between unit operations to create...... a process flow diagram. Towards this end, a superstructure approach is used to represent the treatment alternatives for reaction and separation. A generic process interval model is used to describe each alternative in terms of inputeoutput mass balances including conversion and separation factors. Next...

  2. Gas reactor international cooperative program interim report: German Pebble Bed Reactor design and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    This report describes and evaluates several gas-cooled reactor plant concepts under development within the Federal Republic of Germany (FRG). The concepts, based upon the use of a proven Pebble Bed Reactor (PBR) fuel element design, include nuclear heat generation for chemical processes and electrical power generation. Processes under consideration for the nuclear process heat plant (PNP) include hydrogasification of coal, steam gasification of coal, combined process, and long-distance chemical heat transportation. The electric plant emphasized in the report is the steam turbine cycle (HTR-K), although the gas turbine cycle (HHT) is also discussed. The study is a detailed description and evaluation of the nuclear portion of the various plants. The general conclusions are that the PBR technology is sound and that the HTR-K and PNP plant concepts appear to be achievable through appropriate continuing development programs, most of which are either under way or planned.

  3. Designing of a Fleet-Leader Program for Carbon Composite Overwrapped Pressure Vessels

    Science.gov (United States)

    Murthy, Pappu L.N.; Phoenix, S. Leigh

    2009-01-01

    Composite Overwrapped Pressure Vessels (COPVs) are often used for storing pressurant gases on board spacecraft when mass saving is a prime requirement. Substantial weight savings can be achieved compared to all metallic pressure vessels. For example, on the space shuttle, replacement of all metallic pressure vessels with Kevlar COPVs resulted in a weight savings of about 30 percent. Mass critical space applications such as the Ares and Orion vehicles are currently being planned to use as many COPVs as possible in place of all-metallic pressure vessels to minimize the overall mass of the vehicle. Due to the fact that overwraps are subjected to sustained loads during long periods of a mission, stress rupture failure is a major concern. It is, therefore, important to ascertain the reliability of these vessels by analysis, since it is practically impossible to show by experimental testing the reliability of flight quality vessels. Also, it is a common practice to set aside flight quality vessels as "fleet leaders" in a test program where these vessels are subjected to slightly accelerated operating conditions so that they lead the actual flight vessels both in time and load. The intention of fleet leaders is to provide advanced warning if there is a serious design flaw in the vessels so that a major disaster in the flight vessels can be averted with advance warning. On the other hand, the accelerating conditions must be not so severe as to be prone to false alarms. The primary focus of the present paper is to provide an analytical basis for designing a viable fleet leader program for carbon COPVs. The analysis is based on a stress rupture behavior model incorporating Weibull statistics and power-law sensitivity of life to fiber stress level.

  4. Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995

    Energy Technology Data Exchange (ETDEWEB)

    Karstensen, K.W.

    1995-07-01

    This Quarterly Technical Progress Report covers the period February 1, 1995, through April 30, 1995, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE contract No. DE-AC21-93MC30246. The objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. Tasks 1, 2, 3, 5, 6 and 7 of Phase II have been completed in prior quarters. Their results have been discussed in the applicable quarterly reports and in their respective topical reports. With the exception of Task 7, final editions of these topical reports have been submitted to the DOE. This quarterly report, then, addresses only Task 4 and the nine subtasks included in Task 8, {open_quotes}Design and Test of Critical Components.{close_quotes} These nine subtasks address six ATS technologies as follows: (1) Catalytic Combustion - Subtasks 8.2 and 8.5, (2) Recuperator - Subtasks 8.1 and 8.7, (3) Autothermal Fuel Reformer - Subtask 8.3, (4) High Temperature Turbine Disc - Subtask 8.4, (5) Advanced Control System (MMI) - Subtask 8.6, and (6) Ceramic Materials - Subtasks 8.8 and 8.9. Major technological achievements from Task 8 efforts during the quarter are as follows: (1) The subscale catalytic combustion rig in Subtask 8.2 is operating consistently at 3 ppmv of NO{sub x} over a range of ATS operating conditions. (2) The spray cast process used to produce the rim section of the high temperature turbine disc of Subtask 8.4 offers additional and unplanned spin-off opportunities for low cost manufacture of certain gas turbine parts.

  5. The AP600 advanced simplified nuclear power plant. Results of the test program and progress made toward final design approval

    International Nuclear Information System (INIS)

    Bruschi, H.J.

    1996-01-01

    At the 1994 Pacific Basin Conference, Mr. Bruschi presented a paper describing the AP600, Westinghouse's advanced light water reactor design with passive safety features. Since then, a rigorous test program was completed and AP600 became the most thoroughly tested advanced reactor system design in history. Westinghouse is now well on its way toward receiving Final Design Approval from the U.S. Nuclear Regulatory Commission for AP600. In this paper, the results of the test program will be discussed and an update on prospects for building the plant will be covered. (author)

  6. Training Needs Assessment to Design Empowerment Programs for Preventing Domestic Violence Against Iranian Married Women

    Directory of Open Access Journals (Sweden)

    Leila Kianfard

    2017-05-01

    Full Text Available Background and Purpose: The World Health Organization declared violence against women a top priority for health and emphasized the importance of the world's attention to the prevention and control programs. This study was conducted aimed to identify the training needs of married women referring to health centers in Ahvaz with the objective of enabling the design of a program to prevent violence. Methodology: This sectional study consisted of two qualitative and quantitative studies. In qualitative study, the opinions of 30 married women residing in Ahvaz were collected and analyzed in four focus group discussions. using a validated and reliable questionnaire, the knowledge, attitude, self-efficacy and performance of 320 married women in area of domestic violence were identified Findings: 79% of the women surveyed had adequate awareness about violence against women. 34% of the target group in the field of domestic violence against women has had the right attitude and more than 80% of them stated that violence by men is considered inevitable and natural. 89% of the target group expressed lack of efficacy for the prevention of domestic violence against women. The findings also suggest that there is significant relationship between education and early marriage with violent behavior. Conclusion: providing proper education and awareness to women and group discussion and clarification in order to change attitudes and increase efficacy in abused women against domestic violence are the necessary strategies which result in changing attitudes of women and increasing empowerment of women against domestic violence.

  7. ICT media design for higher grade of elementary school mathematics learning using CS6 program

    Science.gov (United States)

    Zainil, M.; Prahmana, R. C. I.; Helsa, Y.; Hendri, S.

    2017-12-01

    Technological innovation contributes to the emerging of new possibilities to change the learning process. The development of technology could bring the higher quality of education through the integration of technology in the learning. The purpose of this research is to create an interactive multimedia using CS6 program for mathematics learning in higher grade of elementary school. It was a development research using ADDIE model which consists of analysis, design, and evaluation stages. It has successfully developed interactive multimedia in a form of learning CD used in the material of plane figures and solid figures. The prototype has been validated and then tested for the 4th grade of elementary schools. Two schools were involved and the students taught by utilizing the prototype, and then, in the end of learning, they are examined to determine the learning result. There were 72% of the students passed the examination as they classified at good and excellent categories. Finally, the use of CS6 program is promising to help the students learning plane and solid figure in mathematics learning.

  8. Advanced turbine systems program -- Conceptual design and product development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-26

    This Final Technical Report presents the accomplishments on Phase 2 of the Advanced Turbine Systems (ATS). The ATS is an advanced, natural gas fired gas turbine system that will represent a major advance on currently available industrial gas turbines in the size range of 1--20 MW. This report covers a market-driven development. The Market Survey reported in Section 5 identified the customer`s performance needs. This market survey used analyses performed by Solar turbine Incorporated backed up by the analyses done by two consultants, Research Decision Consultants (RDC) and Onsite Energy Corporation (Onsite). This back-up was important because it is the belief of all parties that growth of the ATS will depend both on continued participation in Solar`s traditional oil and gas market but to a major extent on a new market. This new market is distributed electrical power generation. Difficult decisions have had to be made to meet the different demands of the two markets. Available resources, reasonable development schedules, avoidance of schedule or technology failures, probable acceptance by the marketplace, plus product cost, performance and environmental friendliness are a few of the complex factors influencing the selection of the Gas Fired Advanced Turbine System described in Section 3. Section 4 entitled ``Conversion to Coal`` was a task which addresses the possibility of a future interruption to an economic supply of natural gas. System definition and analysis is covered in Section 6. Two major objectives were met by this work. The first was identification of those critical technologies that can support overall attainment of the program goals. Separate technology or component programs were begun to identify and parameterize these technologies and are described in Section 7. The second objective was to prepare parametric analyses to assess performance sensitivity to operating variables and to select design approaches to meet the overall program goals.

  9. Assessment of a pay-for-performance program in primary care designed by target users.

    Science.gov (United States)

    Kirschner, Kirsten; Braspenning, Jozé; Akkermans, Reinier P; Jacobs, J E Annelies; Grol, Richard

    2013-04-01

    Evidence for pay-for-performance (P4P) has been searched for in the last decade as financial incentives increased to influence behaviour of health care professionals to improve quality of care. The effectiveness of P4P is inconclusive, though some reviews reported significant effects. To assess changes in performance after introducing a participatory P4P program. An observational study with a pre- and post-measurement. Setting and subjects. Sixty-five general practices in the south of the Netherlands. Intervention. A P4P program designed by target users containing indicators for chronic care, prevention, practice management and patient experience (general practitioner's [GP] functioning and organization of care). Quality indicators were calculated for each practice. A bonus with a maximum of 6890 Euros per 1000 patients was determined by comparing practice performance with a benchmark. Quality indicators for clinical care (process and outcome) and patient experience. We included 60 practices. After 1 year, significant improvement was shown for the process indicators for all chronic conditions ranging from +7.9% improvement for cardiovascular risk management to +11.5% for asthma. Five outcome indicators significantly improved as well as patients' experiences with GP's functioning and organization of care. No significant improvements were seen for influenza vaccination rate and the cervical cancer screening uptake. The clinical process and outcome indicators, as well as patient experience indicators were affected by baseline measures. Smaller practices showed more improvement. A participatory P4P program might stimulate quality improvement in clinical care and improve patient experiences with GP's functioning and the organization of care.

  10. DESIGN OF AN EDUCATIONAL SIMULATION PROGRAM USING DIGITAL VIDEO PROCESSING TO DETERMINE THE THERMAL EXPANSION OF MATERIALS

    Directory of Open Access Journals (Sweden)

    V. Gökhan BÖCEKÇİ

    2013-01-01

    Full Text Available The present report describes the realization of an educational simulation program to determine the amount of linear thermal expansion in experimental materials. An interferogram signal derived from an interferometric measurement system was modeled as a video signal in a computer environment. A simulation program was designed from the model signal in order to detect the amount of expansion in materials. The simulation program determined the amount of to heat by detecting the number of fringes in interferogram video signals of the material. This simulation program facilitated experimental studies n academic institutions which are deprived of interferometric measurement systems.

  11. SPOT Program

    Science.gov (United States)

    Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard; hide

    2010-01-01

    A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

  12. Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Amelie [Institute for Industrial Productivity (United States); Taylor, Robert P. [Institute for Industrial Productivity (United States); Hedman, Bruce [Institute for Industrial Productivity (United States)

    2014-03-21

    This report provides state regulators, utilities, and other program administrators with an overview of U.S. industrial energy efficiency programs and assesses some of the key features of programs that have generated increased energy savings.

  13. Conceptual design report for the scientific program of the super-FRS experiment collaboration

    International Nuclear Information System (INIS)

    2016-01-01

    This Conceptual Design Report (CDR) presents the plans of the Super-FRS Experiment Collaboration for a variety of experiments, which build on the versatile high-resolution separator and spectrometer performance of the Super-FRS. The characteristic feature of these experiments is the fact that they use the separator as an integral part of the measurement. These experiments build on the experience of the collaboration and their scientific program pursued at the FRS in the last 25 years, but also includes recently developed novel topics. Under these premises, the Super-FRS Experiment Collaboration has identified ten major topics of current interest and with far-reaching scientific potential. In this CDR, the scientific case is briefly recapitulated and the conceptual design of the experiments, the setups and their implementation are described. Much of the needed equipment is already available or, if not, will be realized with new, additional resources and efforts outside the FAIR Cost Books. The related R and D works and some pilot experiments can be carried out at the existing FRS of GSI in FAIR Phase-0. On the midterm, the science program of this collaboration can start at the commissioning phase of the Super-FRS and will continue on the long term with the established full performance. Accordingly, the prototype equipment and other already existing devices can be tested and used at the FRS and can later, when completed or upgraded, be moved to the Super-FRS. The related developments and organization of the Super-FRS Experiment Collaboration are described,and the collaboration partners and institutes are listed. The Super-FRS Experiment Collaboration is formally and firmly established and is a comprising part of the NUSTAR Collaboration. A large variety of modern nuclear physics experiments with new scientific possibilities and outstanding scientific potential were presented in the scientific program (GSI-Report 2014-4), which was very positively evaluated and

  14. Macau, world capital for gambling: A longitudinal study of a youth program designed to instill positive values

    Directory of Open Access Journals (Sweden)

    Andrew Leung Luk

    2013-11-01

    Full Text Available Macau, world capital for gambling: A longitudinal study of a youth program designed to instil positive valuesABSTRACTThis study investigated the effectiveness of a positive youth development program for Chinese Secondary 3 students in two schools, who had been followed up since their entry to Secondary 1. A mixed research method was carried out using a pre- and post-test pre-experimental design and a focus group for the participants. The subjective outcome evaluations included participants’ perceptions of the program, program instructors, benefits of the program and overall satisfaction, and were positive. The longitudinal data from the objective outcome evaluation showed some notable improvements, and the overall effect of the program was also found to be positive for newcomers in the junior secondary years. The focus group interviews revealed mostly positive feedback in terms of the students’ general impressions of the program, with the majority of participants perceiving benefits to themselves from the program. The findings offer positive evidence of the effectiveness of the program. KEYWORDS: adolescents, positive youth development, objective outcome evaluation, subjective outcome evaluation

  15. General-Purpose Heat Source Development: Safety Test Program. Postimpact evaluation, Design Iteration Test 3

    International Nuclear Information System (INIS)

    Schonfeld, F.W.; George, T.G.

    1984-07-01

    The General-Purpose Heat Source(GPHS) provides power for space missions by transmitting the heat of 238 PuO 2 decay to thermoelectric elements. Because of the inevitable return of certain aborted missions, the heat source must be designed and constructed to survive both re-entry and Earth impact. The Design Iteration Test (DIT) series is part of an ongoing test program. In the third test (DIT-3), a full GPHS module was impacted at 58 m/s and 930 0 C. The module impacted the target at an angle of 30 0 to the pole of the large faces. The four capsules used in DIT-3 survived impact with minimal deformation; no internal cracks other than in the regions indicated by Savannah River Plant (SRP) preimpact nondestructive testing were observed in any of the capsules. The 30 0 impact orientation used in DIT-3 was considerably less severe than the flat-on impact utilized in DIT-1 and DIT-2. The four capsules used in DIT-1 survived, while two of the capsules used in DIT-2 breached; a small quantity (approx. = 50 μg) of 238 PuO 2 was released from the capsules breached in the DIT-2 impact. All of the capsules used in DIT-1 and DIT-2 were severely deformed and contained large internal cracks. Postimpact analyses of the DIT-3 test components are described, with emphasis on weld structure and the behavior of defects identified by SRP nondestructive testing

  16. The Design of an Online Concordancing Program for Teaching about Reporting Verbs

    Directory of Open Access Journals (Sweden)

    Joel Bloch

    2009-02-01

    Full Text Available This paper discusses the use of a web-based concordancing program using an interface design similar to the one used at the MICASE concordancing site to help students appropriately choose reporting verbs. Appropriate reporting verbs are important for asserting credible claims in academic papers. An interface was created that asked the students to make lexical, syntactic, and rhetorical choices based on a preset number of criteria related to the decisions writers make in choosing reporting verbs. Based on these choices, the interface could query a database of sentences that had been derived from a corpus of academic writing. The user would then be provided with a small sample of sentences using reporting verbs that matched the criteria that had been selected. The paper discusses how the assumptions about pedagogy for teaching about reporting verbs were incorporated into the design features of the interface and how the implementation of the concordancing site was integrated with the teaching of grammar and vocabulary in an L2 academic writing class.

  17. Environmental changes affect the assembly of soil bacterial community primarily by mediating stochastic processes.

    Science.gov (United States)

    Zhang, Ximei; Johnston, Eric R; Liu, Wei; Li, Linghao; Han, Xingguo

    2016-01-01

    Both 'species fitness difference'-based deterministic processes, such as competitive exclusion and environmental filtering, and 'species fitness difference'-independent stochastic processes, such as birth/death and dispersal/colonization, can influence the assembly of soil microbial communities. However, how both types of processes are mediated by anthropogenic environmental changes has rarely been explored. Here we report a novel and general pattern that almost all anthropogenic environmental changes that took place in a grassland ecosystem affected soil bacterial community assembly primarily through promoting or restraining stochastic processes. We performed four experiments mimicking 16 types of environmental changes and separated the compositional variation of soil bacterial communities caused by each environmental change into deterministic and stochastic components, with a recently developed method. Briefly, because the difference between control and treatment communities is primarily caused by deterministic processes, the deterministic change was quantified as (mean compositional variation between treatment and control) - (mean compositional variation within control). The difference among replicate treatment communities is primarily caused by stochastic processes, so the stochastic change was estimated as (mean compositional variation within treatment) - (mean compositional variation within control). The absolute of the stochastic change was greater than that of the deterministic change across almost all environmental changes, which was robust for both taxonomic and functional-based criterion. Although the deterministic change may become more important as environmental changes last longer, our findings showed that changes usually occurred through mediating stochastic processes over 5 years, challenging the traditional determinism-dominated view. © 2015 John Wiley & Sons Ltd.

  18. Designing A Model of Vocational Training Programs for Disables through ODL

    Directory of Open Access Journals (Sweden)

    Shaista MAJID

    2015-01-01

    Full Text Available This study was conducted to designing a model of vocational training programs for disables. For this purpose desk review was carried out and the vocational training models/programs of Israel, U.K., Vietnam, Japan and Thailand were analyzed to form a conceptual frame work of the model. Keeping in view the local conditions/requirements a model of vocational training program was proposed. The proposed model involved the vocational training plan for the job of cashier for mild group, receptionist for moderate and computer operator for severe group. It specified the type of disability as well involved in the training plan. The model recommended the vocational training of three levels of disability; mild, moderate and severe irrespective to the type. The model consisted of details of structure, objectives, professional support involved, vocational training plan and syllabus/activities, evaluation and on job training etc. International practices regarding VT mixed with the national existing situations were critically analyzed during desk review and finally a plan of VT for disables was proposed. A survey was conducted via a questionnaire to get opinion of the heads and senior vocational instructors of Federal Government vocational training and rehabilitation centers for PWDs. The collected data was statistically analyzed to quantify the suggestions on proposed model. The major findings included that all stakeholders considered VT helpful in rehabilitation of PWDs. All heads and vocational instructors are willing to adopt this model, minimum or no extra funds are needed in its implementation, the vocational teacher employed in the centers can easily manage to adopt this model at their centers because no extra training is required for the staff and they all endorse the VT plan proposed in this model. A vocational training model is required to reduce socio-economic gap and to set professional standards by developing human resources trained in trades. The

  19. Large-scale bi-level strain design approaches and mixed-integer programming solution techniques.

    Science.gov (United States)

    Kim, Joonhoon; Reed, Jennifer L; Maravelias, Christos T

    2011-01-01

    The use of computational models in metabolic engineering has been increasing as more genome-scale metabolic models and computational approaches become available. Various computational approaches have been developed to predict how genetic perturbations affect metabolic behavior at a systems level, and have been successfully used to engineer microbial strains with improved primary or secondary metabolite production. However, identification of metabolic engineering strategies involving a large number of perturbations is currently limited by computational resources due to the size of genome-scale models and the combinatorial nature of the problem. In this study, we present (i) two new bi-level strain design approaches using mixed-integer programming (MIP), and (ii) general solution techniques that improve the performance of MIP-based bi-level approaches. The first approach (SimOptStrain) simultaneously considers gene deletion and non-native reaction addition, while the second approach (BiMOMA) uses minimization of metabolic adjustment to predict knockout behavior in a MIP-based bi-level problem for the first time. Our general MIP solution techniques significantly reduced the CPU times needed to find optimal strategies when applied to an existing strain design approach (OptORF) (e.g., from ∼10 days to ∼5 minutes for metabolic engineering strategies with 4 gene deletions), and identified strategies for producing compounds where previous studies could not (e.g., malate and serine). Additionally, we found novel strategies using SimOptStrain with higher predicted production levels (for succinate and glycerol) than could have been found using an existing approach that considers network additions and deletions in sequential steps rather than simultaneously. Finally, using BiMOMA we found novel strategies involving large numbers of modifications (for pyruvate and glutamate), which sequential search and genetic algorithms were unable to find. The approaches and solution

  20. Temporal integration of loudness in listeners with hearing losses of primarily cochlear origin

    DEFF Research Database (Denmark)

    Buus, Søren; Florentine, Mary; Poulsen, Torben

    1999-01-01

    To investigate how hearing loss of primarily cochlear origin affects the loudness of brief tones, loudness matches between 5- and 200-ms tones were obtained as a function of level for 15 listeners with cochlear impairments and for seven age-matched controls. Three frequencies, usually 0.5, 1, and 4...... kHz, were tested in each listener using a two-interval, two-alternative forced-choice (2I, 2AFC) paradigm with a roving-level, up–down adaptive procedure. Results for the normal listeners generally were consistent with published data [e.g., , J. Acoust Soc. Am. 99, 1633–1644 (1996)]. The amount...

  1. Bilateral Krukenberg Tumours Diagnosed Primarily by Transabdominal Sonography- A Case Report

    Science.gov (United States)

    Padala, Krishna Prasanthi; Mahesh; Gowda, Gautham; Pailoor, Aruna

    2015-01-01

    Krukenberg tumour, also known as carcinoma mucocellulare, is a metastatic adenocarcinoma of ovaries from different primary tumour sites. Gastric carcinoma is most common primary tumour responsible for approximately 50% of Krukenberg tumours. Discrimination between primary ovarian cancer and metastatic tumours in the ovary is important, because their management is different. Here we present a case of female suffering from gastric carcinoma with bilateral Krukenberg tumours, diagnosed primarily by transabdominal sonography. The patient was referred to higher centre for further treatment and followed up. PMID:26816967

  2. Design of problem-specific evolutionary algorithm/mixed-integer programming hybrids: two-stage stochastic integer programming applied to chemical batch scheduling

    Science.gov (United States)

    Urselmann, Maren; Emmerich, Michael T. M.; Till, Jochen; Sand, Guido; Engell, Sebastian

    2007-07-01

    Engineering optimization often deals with large, mixed-integer search spaces with a rigid structure due to the presence of a large number of constraints. Metaheuristics, such as evolutionary algorithms (EAs), are frequently suggested as solution algorithms in such cases. In order to exploit the full potential of these algorithms, it is important to choose an adequate representation of the search space and to integrate expert-knowledge into the stochastic search operators, without adding unnecessary bias to the search. Moreover, hybridisation with mathematical programming techniques such as mixed-integer programming (MIP) based on a problem decomposition can be considered for improving algorithmic performance. In order to design problem-specific EAs it is desirable to have a set of design guidelines that specify properties of search operators and representations. Recently, a set of guidelines has been proposed that gives rise to so-called Metric-based EAs (MBEAs). Extended by the minimal moves mutation they allow for a generalization of EA with self-adaptive mutation strength in discrete search spaces. In this article, a problem-specific EA for process engineering task is designed, following the MBEA guidelines and minimal moves mutation. On the background of the application, the usefulness of the design framework is discussed, and further extensions and corrections proposed. As a case-study, a two-stage stochastic programming problem in chemical batch process scheduling is considered. The algorithm design problem can be viewed as the choice of a hierarchical decision structure, where on different layers of the decision process symmetries and similarities can be exploited for the design of minimal moves. After a discussion of the design approach and its instantiation for the case-study, the resulting problem-specific EA/MIP is compared to a straightforward application of a canonical EA/MIP and to a monolithic mathematical programming algorithm. In view of the

  3. Fastbus diagnostic program (Version 1.1)

    International Nuclear Information System (INIS)

    Acton, P.D.; Clarke, P.E.L.; McKemey, A.K.

    1990-07-01

    The Fastbus Diagnostic Program (FDP) described here is a program designed primarily for module engineering purposes. It provides simple DCL type access to atomic Fastbus operations from the keyboard, without necessitating any lengthy setup of parameters. The commands are designed to cater for the practical needs of an engineer working on, say a prototype module, and requiring fast single line entry, with only a minimum set of required arguments. (author)

  4. Development of Integrated Programs for Aerospace-vehicle Design (IPAD): Product manufacture interactions with the design process

    Science.gov (United States)

    Crowell, H. A.

    1979-01-01

    The product manufacturing interactions with the design process and the IPAD requirements to support the interactions are described. The data requirements supplied to manufacturing by design are identified and quantified. Trends in computer-aided manufacturing are discussed and the manufacturing process of the 1980's is anticipated.

  5. Lamin A/C mutation affecting primarily the right side of the heart

    Directory of Open Access Journals (Sweden)

    Laura Ollila

    2013-04-01

    Full Text Available LMNA mutations are amongst the most important causes of familial dilated cardiomyopathy. The most important cause of arrhythmogenic right ventricular cardiomyopathy (ARVC is desmosomal pathology. The aim of the study was to elucidate the role of LMNA mutations among Finnish cardiomyopathy patients. We screened 135 unrelated cardiomyopathy patients for LMNA mutations. Because of unusual phenotype, two patients were screened for the known Finnish ARVC-related mutations of desmosomal genes, and their Plakophilin-2b gene was sequenced. Myocardial samples from two patients were examined by immunohistochemical plakoglobin staining and in one case by electron microscopy. We found a new LMNA mutation Phe237Ser in a family of five affected members with a cardiomyopathy affecting primarily the right side of the heart. The phenotype resembles ARVC but does not fulfill the Task Force Criteria. The main clinical manifestations of the mutation were severe tricuspid insufficiency, right ventricular enlargement and failure. Three of the affected patients died of the heart disease, and the two living patients received heart transplants at ages 44 and 47. Electron microscopy showed nuclear blebbing compatible with laminopathy. Immunohisto - chemical analysis did not suggest desmosomal pathology. No desmosomal mutations were found. The Phe237Ser LMNA mutation causes a phenotype different from traditional cardiolaminopathy. Our findings suggest that cardiomyopathy affecting primarily the right side of the heart is not always caused by desmosomal pathology. Our observations highlight the challenges in classifying cardiomyopathies, as there often is significant overlap between the traditional categories.

  6. A non-linear programming approach to the computer-aided design of regulators using a linear-quadratic formulation

    Science.gov (United States)

    Fleming, P.

    1985-01-01

    A design technique is proposed for linear regulators in which a feedback controller of fixed structure is chosen to minimize an integral quadratic objective function subject to the satisfaction of integral quadratic constraint functions. Application of a non-linear programming algorithm to this mathematically tractable formulation results in an efficient and useful computer-aided design tool. Particular attention is paid to computational efficiency and various recommendations are made. Two design examples illustrate the flexibility of the approach and highlight the special insight afforded to the designer.

  7. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly progress report, December 1, 1995--February 29, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the overall program status of the General Electric Advanced Gas Turbine Development program, and reports progress on three main task areas. The program is focused on two specific products: (1) a 70-MW class industrial gas turbine based on the GE90 core technology, utilizing a new air cooling methodology; and (2) a 200-MW class utility gas turbine based on an advanced GE heavy-duty machine, utilizing advanced cooling and enhancement in component efficiency. The emphasis for the industrial system is placed on cycle design and low emission combustion. For the utility system, the focus is on developing a technology base for advanced turbine cooling while achieving low emission combustion. The three tasks included in this progress report are on: conversion to a coal-fueled advanced turbine system, integrated program plan, and design and test of critical components. 13 figs., 1 tab.

  8. Development of verification program for safety evaluation of KNGR on-site and off-site power system design

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kem Joong; Ryu, Eun Sook; Choi, Jang Hong; Lee, Byung Il; Han, Hyun Kyu; Oh, Seong Kyun; Kim, Han Kee; Park, Chul Woo; Kim, Min Jeong [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-04-15

    In order to verify the adequacy of the design and analysis of the on-site and off-site power system, we developed the regulatory analysis program. We established the methodology for electric power system and constructed the algorithm of steady-state load flow analysis, fault analysis, transient stability analysis. The developed program to be an advantage of GUI and C++ programming technique. The design of input made easy to access the common use PSS/E format and that of output made users to work with Excel spreadsheet. The performance of program was verified to compare with PSS/E results. The case studies as follows. The verification of load flow analysis of KNGR on-site power system. The evaluation of load flow and transient stability analysis of off-site power system of KNGR. The verification of load flow and transient stability analysis. The frequency drop analysis of loss of generation.

  9. A blended learning approach for teaching computer programming: design for large classes in Sub-Saharan Africa

    Science.gov (United States)

    Bayu Bati, Tesfaye; Gelderblom, Helene; van Biljon, Judy

    2014-01-01

    The challenge of teaching programming in higher education is complicated by problems associated with large class teaching, a prevalent situation in many developing countries. This paper reports on an investigation into the use of a blended learning approach to teaching and learning of programming in a class of more than 200 students. A course and learning environment was designed by integrating constructivist learning models of Constructive Alignment, Conversational Framework and the Three-Stage Learning Model. Design science research is used for the course redesign and development of the learning environment, and action research is integrated to undertake participatory evaluation of the intervention. The action research involved the Students' Approach to Learning survey, a comparative analysis of students' performance, and qualitative data analysis of data gathered from various sources. The paper makes a theoretical contribution in presenting a design of a blended learning solution for large class teaching of programming grounded in constructivist learning theory and use of free and open source technologies.

  10. Healthy and productive workers: using intervention mapping to design a workplace health promotion and wellness program to improve presenteeism

    OpenAIRE

    Ammendolia, Carlo; C?t?, Pierre; Cancelliere, Carol; Cassidy, J. David; Hartvigsen, Jan; Boyle, Eleanor; Soklaridis, Sophie; Stern, Paula; Amick, Benjamin

    2016-01-01

    Background Presenteeism is a growing problem in developed countries mostly due to an aging workforce. The economic costs related to presenteeism exceed those of absenteeism and employer health costs. Employers are implementing workplace health promotion and wellness programs to improve health among workers and reduce presenteeism. How best to design, integrate and deliver these programs are unknown. The main purpose of this study was to use an intervention mapping approach to develop a workpl...

  11. A Professional Development Program for Dental Medical Educators in Kuwait: Needs Assessment, Program Design and Formative Evaluation

    Science.gov (United States)

    Alyaseen, Haneen

    2017-01-01

    New innovative methods of teaching and learning adopted from mainstream research and development in educational theory and practice are being adapted to serve the unique needs of the medical professions. The success of these methods requires careful planning and establishment of faculty development programs. The purpose of this study is to perform…

  12. A web-based program for informal caregivers of persons with Alzheimer's disease: an iterative user-centered design.

    Science.gov (United States)

    Cristancho-Lacroix, Victoria; Moulin, Florence; Wrobel, Jérémy; Batrancourt, Bénédicte; Plichart, Matthieu; De Rotrou, Jocelyne; Cantegreil-Kallen, Inge; Rigaud, Anne-Sophie

    2014-09-15

    Web-based programs have been developed for informal caregivers of people with Alzheimer's disease (PWAD). However, these programs can prove difficult to adopt, especially for older people, who are less familiar with the Internet than other populations. Despite the fundamental role of usability testing in promoting caregivers' correct use and adoption of these programs, to our knowledge, this is the first study describing this process before evaluating a program for caregivers of PWAD in a randomized clinical trial. The objective of the study was to describe the development process of a fully automated Web-based program for caregivers of PWAD, aiming to reduce caregivers' stress, and based on the user-centered design approach. There were 49 participants (12 health care professionals, 6 caregivers, and 31 healthy older adults) that were involved in a double iterative design allowing for the adaptation of program content and for the enhancement of website usability. This process included three component parts: (1) project team workshops, (2) a proof of concept, and (3) two usability tests. The usability tests were based on a mixed methodology using behavioral analysis, semistructured interviews, and a usability questionnaire. The user-centered design approach provided valuable guidelines to adapt the content and design of the program, and to improve website usability. The professionals, caregivers (mainly spouses), and older adults considered that our project met the needs of isolated caregivers. Participants underlined that contact between caregivers would be desirable. During usability observations, the mistakes of users were also due to ergonomics issues from Internet browsers and computer interfaces. Moreover, negative self-stereotyping was evidenced, when comparing interviews and results of behavioral analysis. Face-to-face psycho-educational programs may be used as a basis for Web-based programs. Nevertheless, a user-centered design approach involving targeted

  13. Effects of structured education program on organ donor designation of nursing students and their families: A randomized controlled trial.

    Science.gov (United States)

    Murakami, Minoru; Fukuma, Shingo; Ikezoe, Masaya; Iizuka, Chizuko; Izawa, Satoshi; Yamamoto, Yosuke; Yamazaki, Shin; Fukuhara, Shunichi

    2016-11-01

    Little is known about the effect of education programs on changing attitudes and behaviors of participants and their families toward deceased organ donation. The subjects of this randomized trial were Japanese nursing students who were not previously designated organ donors. They were randomly assigned to either the education program or information booklet group. The program comprised a lecture followed by group discussion and information booklet. The primary outcome was self-reported organ donor designation. Outcomes were assessed by questionnaire. Data of 203 (99.0%) students were analyzed. At study end, seven of 102 students (6.9%) of the program group and one of 101 students (1.0%) of the booklet group consented to donate organs (proportion ratio 6.93 [95% CI 0.87-55.32]). There were significant between-group differences in willingness to consent for donation (54.9% vs 39.6%; proportion ratio 1.39 [95% CI 1.03-1.87]), family discussion (31.4% vs 15.9%; 1.98 [1.16-3.38]), and organ donor designation of family members (11.8% vs 2.0%; 5.94 [1.36-25.88]). No group differences were found in willingness for organ donation by students and family members. Although there were no significant between-group differences in organ donor designation, the program seems to indirectly promote consent to organ donation by their families. © 2016 The Authors. Clinical Transplantation Published by John Wiley & Sons Ltd.

  14. Simulation programs for ph.D. study of analysis, modeling and optimum design of solar domestic hot water systems

    Energy Technology Data Exchange (ETDEWEB)

    Lin Qin

    1998-12-31

    The design of solar domestic hot water (DHW) systems is a complex process, due to characteristics inherent in the solar heating technology. Recently, computer simulation has become a widely used technique to improve the understanding of the thermal processes in such systems. One of the main objects of the Ph.D. study of `Analysis, Modelling and optimum Design of Solar Domestic Hot Water Systems` is to develop and verify programs for carrying out the simulation and evaluation of the dynamic performance of solar DHW systems. During this study, simulation programs for hot water distribution networks and for certain types of solar DHW systems were developed. (au)

  15. The Serotonin Transporter Undergoes Constitutive Internalization and Is Primarily Sorted to Late Endosomes and Lysosomal Degradation*

    Science.gov (United States)

    Rahbek-Clemmensen, Troels; Bay, Tina; Eriksen, Jacob; Gether, Ulrik; Jørgensen, Trine Nygaard

    2014-01-01

    The serotonin transporter (SERT) plays a critical role in regulating serotonin signaling by mediating reuptake of serotonin from the extracellular space. The molecular and cellular mechanisms controlling SERT levels in the membrane remain poorly understood. To study trafficking of the surface resident SERT, two functional epitope-tagged variants were generated. Fusion of a FLAG-tagged one-transmembrane segment protein Tac to the SERT N terminus generated a transporter with an extracellular epitope suited for trafficking studies (TacSERT). Likewise, a construct with an extracellular antibody epitope was generated by introducing an HA (hemagglutinin) tag in the extracellular loop 2 of SERT (HA-SERT). By using TacSERT and HA-SERT in antibody-based internalization assays, we show that SERT undergoes constitutive internalization in a dynamin-dependent manner. Confocal images of constitutively internalized SERT demonstrated that SERT primarily co-localized with the late endosomal/lysosomal marker Rab7, whereas little co-localization was observed with the Rab11, a marker of the “long loop” recycling pathway. This sorting pattern was distinct from that of a prototypical recycling membrane protein, the β2-adrenergic receptor. Furthermore, internalized SERT co-localized with the lysosomal marker LysoTracker and not with transferrin. The sorting pattern was further confirmed by visualizing internalization of SERT using the fluorescent cocaine analog JHC1-64 and by reversible and pulse-chase biotinylation assays showing evidence for lysosomal degradation of the internalized transporter. Finally, we found that SERT internalized in response to stimulation with 12-myristate 13-acetate co-localized primarily with Rab7- and LysoTracker-positive compartments. We conclude that SERT is constitutively internalized and that the internalized transporter is sorted mainly to degradation. PMID:24973209

  16. Program for the development of design data: LMFBR steam generator materials

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-01

    Progress in fiscal year 1976 is reported for two tasks in the LMFBR steam generator materials development program. The primary objective of Task 18 is characterization of materials, mainly 2-1/4 Cr-1 Mo and austenitic stainless steels, to assure that satisfactory materials compatibility is achieved with LMFBR steam generator environments. Studies described include: the kinetics and magnitude of decarburization of 2-1/4 Cr-1 Mo in high temperature liquid sodium; decarburization effects on mechanical properties; stress corrosion susceptibility of 2-1/4 Cr-1 Mo in water/steam environments of LMFBR steam generators; and stainless steel mechanical properties within a carburizing sodium environment at high temperatures. In addition, two activities are in progress that directly support LMFBR steam generator design and fabrication. Under Subtask E, General Electric heads the working committee on steam generator materials for the Nuclear Systems Materials Handbook. Subtask F, an experimental effort, is investigating thermal degradation effects produced by particulate deposition (in sodium) on heat transfer surfaces. The Steam Generator Materials Qualification Task (Task 10-G) was initiated in support of the development of materials and processes used in Clinch River Breeder Reactor steam generators. The topics discussed are: LMFBR steam generator tubing; LMFBR steam generator tubesheet forgings (characterization of VAR/ESR melted 2-1/4 Cr-1 Mo); friction, wear and self-welding; nondestructive examination development; water chemistry studies; and transition joint development.

  17. A Framework for Designing Training Programs to Foster Self-Regulated Learning and Text Analysis Skills

    Directory of Open Access Journals (Sweden)

    Daniela Wagner

    2014-01-01

    Full Text Available The study’s aim was to develop an intervention program and to evaluate its contribution to students’ self-regulated learning (SRL and text analysis skills. In a student-focused training approach, the students themselves acquired the training strategies, whereas in the teacher-focused training, the teachers were enabled to explicitly impart these strategies to their students. In order to investigate the effectiveness of the intervention in terms of transfer benefits on SRL and text analysis skills, 274 lower secondary students were examined in a pretest-training-posttest design. Based on two different training approaches, a distinction was made between four groups: student training (singleST, teacher training (singleTT, combination of student and teacher training (ComT, and control group (CG. Substantially more transfer was revealed in all training conditions as compared to the control group. Specifically, the singleST group showed the highest learning gains for all variables. Conversely, a combination of both approaches (ComT did not result in synergetic effects, but rather in reciprocal interferences.

  18. Developing computer-based training programs for basic mammalian histology: Didactic versus discovery-based design

    Science.gov (United States)

    Fabian, Henry Joel

    Educators have long tried to understand what stimulates students to learn. The Swiss psychologist and zoologist, Jean Claude Piaget, suggested that students are stimulated to learn when they attempt to resolve confusion. He reasoned that students try to explain the world with the knowledge they have acquired in life. When they find their own explanations to be inadequate to explain phenomena, students find themselves in a temporary state of confusion. This prompts students to seek more plausible explanations. At this point, students are primed for learning (Piaget 1964). The Piagetian approach described above is called learning by discovery. To promote discovery learning, a teacher must first allow the student to recognize his misconception and then provide a plausible explanation to replace that misconception (Chinn and Brewer 1993). One application of this method is found in the various learning cycles, which have been demonstrated to be effective means for teaching science (Renner and Lawson 1973, Lawson 1986, Marek and Methven 1991, and Glasson & Lalik 1993). In contrast to the learning cycle, tutorial computer programs are generally not designed to correct student misconceptions, but rather follow a passive, didactic method of teaching. In the didactic or expositional method, the student is told about a phenomenon, but is neither encouraged to explore it, nor explain it in his own terms (Schneider and Renner 1980).

  19. Design a computational program to calculate the composition variations of nuclear materials in the reactor operations

    International Nuclear Information System (INIS)

    Mohmmadnia, Meysam; Pazirandeh, Ali; Sedighi, Mostafa; Bahabadi, Mohammad Hassan Jalili; Tayefi, Shima

    2013-01-01

    Highlights: ► The atomic densities of light and heavy materials are calculated. ► The solution is obtained using Runge–Kutta–Fehlberg method. ► The material depletion is calculated for constant flux and constant power condition. - Abstract: The present work investigates an appropriate way to calculate the variations of nuclides composition in the reactor core during operations. Specific Software has been designed for this purpose using C#. The mathematical approach is based on the solution of Bateman differential equations using a Runge–Kutta–Fehlberg method. Material depletion at constant flux and constant power can be calculated with this software. The inputs include reactor power, time step, initial and final times, order of Taylor Series to calculate time dependent flux, time unit, core material composition at initial condition (consists of light and heavy radioactive materials), acceptable error criterion, decay constants library, cross sections database and calculation type (constant flux or constant power). The atomic density of light and heavy fission products during reactor operation is obtained with high accuracy as the program outputs. The results from this method compared with analytical solution show good agreements

  20. Design and analysis of aquatic monitoring programs at nuclear power plants.

    Energy Technology Data Exchange (ETDEWEB)

    McKenzie, D.H.; Kannberg, L.D.; Gore, K.L.; Arnold, E.M.; Watson, D.G.

    1977-11-01

    This report addresses some of the problems of designing, conducting, and analyzing aquatic environmental monitoring programs for impact assessment of nuclear power plants. The concepts discussed are applicable to monitoring the effects of chemical, radioactive, or thermal effluents. The concept of control and treatment station pairs is the fundamental basis for the experimental method proposed. This concept is based on the hypothesis that the relationship between the two stations forming the pair can be estimated from the preoperational period and that this relationship holds during the operational period. Any changes observed in this relationship during the operational period are assumed to be the result of the power plant impacts. Thus, it is important that station pairs are selected so it can be assumed that they respond to natural environmental changes in a manner that maintains that relationship. The major problem in establishing the station pairs will be the location of the control station. The universal heterogeneity in the environment will prevent the establishment of identical station pairs. The requirement that the control station remain unaffected by the operation of the power plant dictates a spacial separation with its associated differences in habitat. Thus, selection of the control station will be based upon balancing the following two criteria: (1) far enough away from the plant site to be beyond the plant influence, and (2) close enough to the treatment station that the biological communities will respond to natural environmental changes consistently in the same manner.