ELESTRES.M11K program users'manual and description

International Nuclear Information System (INIS)

Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

1992-12-01

ELESTRES.M11K is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computers the one-dimensional temperature distribution and thermal expansion of the fuel pellets, and computes two-dimensional pellet deformation using FEM. The amount of fission gas released and sheath strain/stress are also computed. This document is intended as a users' manual and description for ELESTRES.M11K program. (Author)

Description of a multifaceted rehabilitation program including overground gait training for a child with cerebral palsy: A case report.

Science.gov (United States)

Farrell, Elizabeth; Naber, Erin; Geigle, Paula

2010-01-01

This case describes the outcomes of a multifaceted rehabilitation program including body weight-supported overground gait training (BWSOGT) in a nonambulatory child with cerebral palsy (CP) and the impact of this treatment on the child's functional mobility. The patient is a nonambulatory 10-year-old female with CP who during an inpatient rehabilitation stay participated in direct, physical therapy 6 days per week for 5 weeks. Physical therapy interventions included stretching of her bilateral lower extremities, transfer training, bed mobility training, balance training, kinesiotaping, supported standing in a prone stander, two trials of partial weight-supported treadmill training, and for 4 weeks, three to five times per week, engaged in 30 minutes of BWSOGT using the Up n' go gait trainer, Lite Gait Walkable, and Rifton Pacer gait trainer. Following the multifaceted rehabilitation program, the patient demonstrated increased step initiation, increased weight bearing through bilateral lower extremities, improved bed mobility, and increased participation in transfers. The child's Gross Motor Functional Measure (GMFM) scores increased across four dimensions and her Physical Abilities and Mobility Scale (PAMS) increased significantly. This case report illustrates that a multifaceted rehabilitation program including BWSOGT was an effective intervention strategy to improve functional mobility in this nonambulatory child with CP.

Water Resources Research Grant Program project descriptions, fiscal year 1987

Science.gov (United States)

,

1987-01-01

This report contains information on the 34 new projects funded by the United States Geological Survey 's Water Resources Research Grant Program in fiscal year 1987 and on 3 projects completed during the year. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), and a project description that includes: (1) identification of water related problems and problem-solution approach (2) contribution to problem solution, (3) objectives, and (4) approach. The 34 projects include 12 in the area of groundwater quality problems, 12 in the science and technology of water quality management, 1 in climate variability and the hydrologic cycle, 4 in institutional change in water resources management, and 5 in surface water management. For the three completed projects, the report furnishes the grant number; project title; performing organization; principal investor(s); starting data; data of receipt of final report; and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report contains tables showing: (1) proposals received according to area of research interest, (2) grant awards and funding according to area of research interest, (3) proposals received according to type of submitting organization, and (4) awards and funding according to type of organization. (Author 's abstract)

Quality assurance requirements and description for the Civilian Radioactive Waste Management Program

International Nuclear Information System (INIS)

1992-01-01

The Quality Assurance Requirements and Description (QARD) is the principal quality assurance document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the Quality Assurance Program. The QARD contains regulatory requirements and program commitments necessary for the development of an effective quality assurance program. Quality assurance implementing documents must be based on, and consistent with, QARD requirements. The QARD applies to the following: (1) acceptance of spent nuclear fuel and high-level radioactive waste; (2) transport of spent nuclear fuel and high-level radioactive waste; (3) the Monitored Retrievable Storage (MRS) facility through application for an operating license; (4) Mined Geologic Disposal System (MGDS), including the site characterization activities (exploratory studies facility (ESF) and surface based testing), through application for an operating license; (5) the high-level-waste form from production through acceptance. Section 2.0 defines in greater detail criteria for determining work subject to QARD requirements. The QARD is organized into sections, supplements, appendices, and a glossary. The sections contain requirements that are common to all Program elements. The supplements contain requirements for specialized activities. The appendices contain requirements that are specific to an individual Program element. The glossary establishes a common vocabulary for the Quality Assurance Program

KAFEPA-II program users' manual and description

International Nuclear Information System (INIS)

Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

1992-04-01

KAFEPA-II is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computes the one-dimensional temperature distribution and thermal expansion of the fuel pellets. The amount of gas released during irradiation of the fuel is also computed. Thermal expansion and gas pressure inside the fuel element are then used to compute the strains and stresses in the sheath. This document is intended as a user's manual and description for KAFEPA-II. (Author)

International Nuclear Model. Volume 3. Program description. Appendix A-H (Part 1)

International Nuclear Information System (INIS)

Andress, D.

1985-01-01

The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decisions based on an input set of technical, economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. This volume contains appendices A through H including a description of subroutines and the Fortran listing of the program

Employee assistance programs: history and program description.

Science.gov (United States)

Gilbert, B

1994-10-01

1. The history and development of Employee Assistance Programs (EAPs) can be traced back to the 1800s. There are currently over 10,000 EAPs in the United States. 2. Standards for program accreditation and counselor certification have been established for EAPs. The "core technology of Employee Assistance Programs" includes identification of behavioural problems based on job performance issues, expert consultation with supervisors, appropriate use of constructive confrontation, microlinkages with treatment providers and resources, macrolinkages between providers, resources, and work organizations, focus on substance abuse, and evaluation of employee success based on job performance. 3. Some EAPs take a broad brush approach, and incorporate health promotion and managed care functions.

US Department of Energy, Richland Operations Office Integrated Safety Management System Program Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System (ISMS) Program Description (PD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This PD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this PD contains some information on contractor processes and procedures which then require RL approval or oversight

Computer automation of continuous-flow analyzers for trace constituents in water. Volume 4. Description of program segments. Part 2. TAAINRE

International Nuclear Information System (INIS)

Crawford, R.W.

1979-01-01

TAAINRE, the second program in the series of programs necessary in automating the Technicon AutoAnalyzer, is presented. A flow chart and sequence list that describes and illustrates the function of each logical group of coding, and a description of the contents and function of each section and subroutine in the program is included. In addition, all arrays, strings, and variables are listed and defined, and a sample program listing with a complete list of symbols and references provided

Computer automation of continuous-flow analyzers for trace constituents in water. Volume 4. Description of program segments. Part 1. TAAIN

International Nuclear Information System (INIS)

Crawford, R.W.

1979-01-01

This report describes TAAIN, the first program in the series of programs necessary in automating the Technicon AutoAnalyzer. A flow chart and sequence list that describes and illustrates each logical group of coding, and a description of the contents and functions of each section and subroutine in the program is included. In addition, all arrays, strings, and variables are listed and defined, and a sample program listing with a complete list of symbols and references is provided

FURNACE; a toroidal geometry neutronic program system method description and users manual

International Nuclear Information System (INIS)

Verschuur, K.A.

1984-12-01

The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

46 CFR 176.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Hull and Tailshaft Examinations § 176.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an...

Respiratory Protection Program. Programmatic description

Energy Technology Data Exchange (ETDEWEB)

Brooks, J.M.; Porter, W.E.

1986-03-01

The ORNL Respirator Program is designed to provide employees with devices which afford maximum protection with minimum inconvenience and discomfort. Teamwork is essential since a comprehensive program involves the Medical Department, the Industrial Hygiene Department, Radiation and Safety Surveys, the Operations Division, Quality Assurance and Inspection, and the Fire Department. The purpose of this manual is to describe in detail the ORNL Respirator Program. Included are discussions of the following elements: quality assurance, selection, fit-testing, maintenance and issue, certified breathing air for self-contained breathing apparatus, inspection, program surveillance, available devices, and standard operating procedures. As program modifications develop and improvements are made, periodic revisions may be necessary. The Industrial Hygiene Department will perform this task on an ''as required'' basis.

46 CFR 71.50-15 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an alternative to a drydock examination by allowing...

AGRIS: Description of computer programs

International Nuclear Information System (INIS)

Schmid, H.; Schallaboeck, G.

1976-01-01

The set of computer programs used at the AGRIS (Agricultural Information System) Input Unit at the IAEA, Vienna, Austria to process the AGRIS computer-readable data is described. The processing flow is illustrated. The configuration of the IAEA's computer, a list of error messages generated by the computer, the EBCDIC code table extended for AGRIS and INIS, the AGRIS-6 bit code, the work sheet format, and job control listings are included as appendixes. The programs are written for an IBM 370, model 145, operating system OS or VS, and require a 130K partition. The programming languages are PL/1 (F-compiler) and Assembler

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

Land reclamation program description

Energy Technology Data Exchange (ETDEWEB)

None

1977-05-01

The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

Clean Coal Technology Demonstration Program: Program Update 2001

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2002-07-30

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

Description of the thermoelastic/plastic computer program TEPCO. Memorandum report RSI-0040

International Nuclear Information System (INIS)

Pariseau, W.G.

1975-01-01

Presented is a description of the two-dimensional (plane strain, axial symmetry) thermoelastic/plastic computer program TEPCO used by RE/SPEC Inc. in conjunction with an investigation of rock mechanics of underground radioactive waste disposal

Data Science Programs in U.S. Higher Education: An Exploratory Content Analysis of Program Description, Curriculum Structure, and Course Focus

Science.gov (United States)

Tang, Rong; Sae-Lim, Watinee

2016-01-01

In this study, an exploratory content analysis of 30 randomly selected Data Science (DS) programs from eight disciplines revealed significant gaps in current DS education in the United States. The analysis centers on linguistic patterns of program descriptions, curriculum requirements, and DS course focus as pertaining to key skills and domain…

15 CFR 9.3 - Appliances and equipment included in program.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Appliances and equipment included in... VOLUNTARY LABELING PROGRAM FOR HOUSEHOLD APPLIANCES AND EQUIPMENT TO EFFECT ENERGY CONSERVATION § 9.3 Appliances and equipment included in program. The appliances and equipment included in this program are room...

Nuclear matter descriptions including quark structure of the hadrons

International Nuclear Information System (INIS)

Huguet, R.

2008-07-01

It is nowadays well established that nucleons are composite objects made of quarks and gluons, whose interactions are described by Quantum chromodynamics (QCD). However, because of the non-perturbative character of QCD at the energies of nuclear physics, a description of atomic nuclei starting from quarks and gluons is still not available. A possible alternative is to construct effective field theories based on hadronic degrees of freedom, in which the interaction is constrained by QCD. In this framework, we have constructed descriptions of infinite nuclear matter in relativistic mean field theories taking into account the quark structure of hadrons. In a first approach, the in medium modifications of mesons properties is dynamically obtained in a Nambu-Jona-Lasinio (NJL) quark model. This modification is taken into account in a relativistic mean field theory based on a meson exchange interaction between nucleons. The in-medium modification of mesons masses and the properties of infinite nuclear matter have been studied. In a second approach, the long and short range contributions to the in-medium modification of the nucleon are determined. The short range part is obtained in a NJL quark model of the nucleon. The long range part, related to pions exchanges between nucleons, has been determined in the framework of Chiral Perturbation theory. These modifications have been used to constrain the couplings of a point coupling relativistic mean field model. A realistic description of the saturation properties of nuclear matter is obtained. (author)

46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative...

The Caltech Concurrent Computation Program - Project description

Science.gov (United States)

Fox, G.; Otto, S.; Lyzenga, G.; Rogstad, D.

1985-01-01

The Caltech Concurrent Computation Program wwhich studies basic issues in computational science is described. The research builds on initial work where novel concurrent hardware, the necessary systems software to use it and twenty significant scientific implementations running on the initial 32, 64, and 128 node hypercube machines have been constructed. A major goal of the program will be to extend this work into new disciplines and more complex algorithms including general packages that decompose arbitrary problems in major application areas. New high-performance concurrent processors with up to 1024-nodes, over a gigabyte of memory and multigigaflop performance are being constructed. The implementations cover a wide range of problems in areas such as high energy and astrophysics, condensed matter, chemical reactions, plasma physics, applied mathematics, geophysics, simulation, CAD for VLSI, graphics and image processing. The products of the research program include the concurrent algorithms, hardware, systems software, and complete program implementations.

BWR Full Integral Simulation Test (FIST) program: facility description report

International Nuclear Information System (INIS)

Stephens, A.G.

1984-09-01

A new boiling water reactor safety test facility (FIST, Full Integral Simulation Test) is described. It will be used to investigate small breaks and operational transients and to tie results from such tests to earlier large-break test results determined in the TLTA. The new facility's full height and prototypical components constitute a major scaling improvement over earlier test facilities. A heated feedwater system, permitting steady-state operation, and a large increase in the number of measurements are other significant improvements. The program background is outlined and program objectives defined. The design basis is presented together with a detailed, complete description of the facility and measurements to be made. An extensive component scaling analysis and prediction of performance are presented

Description and comparison of pharmacy technician training programs in the United States.

Science.gov (United States)

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

International Nuclear Information System (INIS)

1980-06-01

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates

'Only systems thinking can improve family planning program in Pakistan': A descriptive qualitative study.

Science.gov (United States)

Zafar, Saira; Shaikh, Babar Tasneem

2014-12-01

Family Planning (FP) program in Pakistan has been struggling to achieve the desired indicators. Despite a well-timed initiation of the program in late 50s, fertility decline has been sparingly slow. As a result, rapid population growth is impeding economic development in the country. A high population growth rate, the current fertility rate, a stagnant contraceptive prevalence rate and high unmet need remain challenging targets for population policies and FP programs. To accelerate the pace of FP programs and targets concerned, it is imperative to develop and adopt a holistic approach and strategy for plugging the gaps in various components of the health system: service delivery, information systems, drugs-supplies, technology and logistics, Human Resources (HRs), financing, and governance. Hence, World Health Organization (WHO) health systems building blocks present a practical framework for overall health system strengthening. This descriptive qualitative study, through 23 in-depth interviews, explored the factors related to the health system, and those responsible for a disappointing FP program in Pakistan. Provincial representatives from Population Welfare and Health departments, donor agencies and non-governmental organizations involved with FP programs were included in the study to document the perspective of all stakeholders. Content analysis was done manually to generate nodes, sub-nodes and themes. Performance of FP programs is not satisfactory as shown by the indicators, and these programs have not been able to deliver the desired outcomes. Interviewees agreed that inadequate prioritization given to the FP program by successive governments has led to this situation. There are issues with all health system areas, including governance, strategies, funding, financial management, service delivery systems, HRs, technology and logistic systems, and Management Information System (MIS); these have encumbered the pace of success of the program. All stakeholders

Rock Visualization System. Technical description (RVS v.3.5)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS v.3.5)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Plutonium immobilization project development and testing quality assurance program description - February 1999

International Nuclear Information System (INIS)

MacLean, L. M.; Ziemba, J.

1999-01-01

Lawrence Livermore National Laboratory Immobilization Development and Testing organization (LLNL ID and T) is a Participant in the Plutonium Immobilization Project (PIP). The LLNL D and T has lead responsibilities for form characterization and qualification, ceramic form development, process/equipment development with plutonium, and process systems testing and validation for both conversion and immobilization. This work must be performed in accordance with the graded approach of a Quality Assurance (QA) Program. A QA Program has been developed at LLNL to meet the requirements of the DOE/MD Quality Assurance Requirements. The LLNL QA Program consists of a Quality Assurance Program Description (QAPD) and Quality Implementing Procedures. These documents interface and are a subset of the overall PIP QA Program Documents. The PIP QA Program is described in the PIP ID and T QA Plan, PIP QAPD, and QA Procedures. Other Participant Organizations also must document and describe their PIP compliant QA Programs in a QAPD and implementing procedures. The purpose of this LLNL QAPD is to describe the organization, management processes, QA Controls for Grading, functional responsibilities, levels of authority, and interfaces for those managing, performing, and assessing the adequacy of work

‘Only Systems Thinking Can Improve Family Planning Program in Pakistan’: A Descriptive Qualitative Study

Directory of Open Access Journals (Sweden)

Saira Zafar

2014-12-01

Full Text Available Background Family Planning (FP program in Pakistan has been struggling to achieve the desired indicators. Despite a well-timed initiation of the program in late 50s, fertility decline has been sparingly slow. As a result, rapid population growth is impeding economic development in the country. A high population growth rate, the current fertility rate, a stagnant contraceptive prevalence rate and high unmet need remain challenging targets for population policies and FP programs. To accelerate the pace of FP programs and targets concerned, it is imperative to develop and adopt a holistic approach and strategy for plugging the gaps in various components of the health system: service delivery, information systems, drugs-supplies, technology and logistics, Human Resources (HRs, financing, and governance. Hence, World Health Organization (WHO health systems building blocks present a practical framework for overall health system strengthening. Methods This descriptive qualitative study, through 23 in-depth interviews, explored the factors related to the health system, and those responsible for a disappointing FP program in Pakistan. Provincial representatives from Population Welfare and Health departments, donor agencies and non-governmental organizations involved with FP programs were included in the study to document the perspective of all stakeholders. Content analysis was done manually to generate nodes, sub-nodes and themes. Results Performance of FP programs is not satisfactory as shown by the indicators, and these programs have not been able to deliver the desired outcomes. Interviewees agreed that inadequate prioritization given to the FP program by successive governments has led to this situation. There are issues with all health system areas, including governance, strategies, funding, financial management, service delivery systems, HRs, technology and logistic systems, and Management Information System (MIS; these have encumbered the pace of

Development of a Standardized Job Description for Healthcare Managers of Metabolic Syndrome Management Programs in Korean Community Health Centers

Directory of Open Access Journals (Sweden)

Youngjin Lee, RN, PhD

2014-03-01

Conclusion: A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs.

Education Program on Fossil Resources Including Coal

Science.gov (United States)

Usami, Masahiro

Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

BIPR-5 program

International Nuclear Information System (INIS)

Petrunin, D.M.; Belyaeva, E.D.; Kireeva, I.L.

1975-01-01

The BIPR-5 program, which solves the relevant one-group equation in a three-dimensional inhomogeneous WWER reactor, makes it possible to simulate all the principal states of the core, including the maintenance of the critical state by means of rods or a liquid absorber on fuel burn-up or in transitional processes on xenon and samarium. The present paper includes a brief description of the program structure and a detailed description of input data and actually represents maintenance instructions

Description of CORSET: a computer program for quantitative x-ray fluorescence analysis

International Nuclear Information System (INIS)

Stohl, F.V.

1980-08-01

Quantitative x-ray fluorescence analysis requires a method of correcting for absorption and secondary fluorescence effects due to the sample matrix. The computer program CORSET carries out these corrections without requiring a knowledge of the spectral distribution of the x-ray source, and only requires one standard per element or one standard containing all the elements. Sandia's version of CORSET has been divided into three separate programs to fit Sandia's specific requirements for on-line analysis in a melt facility. The melt facility is used to fabricate new alloys with very variable compositions and requires very rapid analyses during a run. Therefore, the standards must be analyzed several days in advance. Program DAT1 is used to set up a permanent file consisting of all the data related to the standards. Program UNINT is used to set up a permanent file with the intensities, background counts and counting times of the unknowns. Program CORSET uses the files created in UNINT and DAT1 to carry out the analysis. This report contains descriptions, listings, and sample runs for these programs. The accuracy of the analyses carried out with these three programs is about 1 to 2% relative with an elemental concentration of about 10 wt %

A coherent description of the process of design

DEFF Research Database (Denmark)

Hertz, Kristian Dahl

1992-01-01

, and others. Doing so, a corresponding number of philosophical problems are solved, and the description becomes a coherent theory. The author has shown that it is possible to make a computer program for conceptual modelling based on the theory presented, and the principles of a CAD system including......A description of the creative design process is given based on Empiricism and using the theory of sets on conceptual and subconscious representations of the human mind. Definitions that are more precise are given of a number of common concepts such as association, synthesis, culture, creation, art...... the program and supporting the creative process of the designer is described....

Baccalaureate Student Nurses' Study Habits Prior to Admission to Nursing Program: A Descriptive Qualitative Study.

Science.gov (United States)

Felicilda-Reynaldo, Rhea Faye D; Cruz, Jonas Preposi; Bigley, Louise; Adams, Kathryn

2017-06-01

Faculty continue to observe students struggling as they adapt their study strategies to learn nursing core content. This study described the study habits of Bachelor of Science in Nursing (BSN) students prior to admission to the program. This study used a descriptive qualitative research design. A purposive sample of 19 BSN students (juniors [n=10] and seniors [n=9]) from a 4-year public Midwestern university were included in this study. Two focus group sessions, using a semi-structured interview guide, were conducted in the spring semester of 2013. The four themes which emerged from the analysis of data were: "I just got it," "I had a lot of time then," "I studied alone" mostly, and "…a little struggle with the sciences." The findings suggest the BSN students did not study much or employed poor study strategies during their years completing general education courses. Academic support is needed by students prior to admission to the nursing program so they can learn effective study skills and modify their study habits for easier adaptation to the rigors of nursing education. Published by Elsevier Ltd.

System description of the Basic MRS System for the FY 1990 Systems Integration Program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Basic MRS System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the Office of Civilian Radioactive Waste Management Office (OCRWM). Two specific systems studies initiated in FY 1990, the Reference System Performance Evaluation and the Aggregate Receipt Rate Study, utilize the information in this document. The Basic MRS System is the current OCRWM reference high-level radioactive wastes repository system concept. It is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes. The Basic MRS System includes a storage-only MRS that provides for a limited amount of commercial spent fuel storage capacity prior to acceptance by the geologic repository for disposal. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. The basic MRS system contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, an MRS facility that provides interim storage wastes accepted from the waste generators, a repository facility that packages the wastes and then emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the waste between these major facilities

A Descriptive Analysis of the Use of Twitter by Emergency Medicine Residency Programs.

Science.gov (United States)

Diller, David; Yarris, Lalena M

2018-02-01

Twitter is increasingly recognized as an instructional tool by the emergency medicine (EM) community. In 2012, the Council of Residency Directors in Emergency Medicine (CORD) recommended that EM residency programs' Twitter accounts be managed solely by faculty. To date, little has been published regarding the patterns of Twitter use by EM residency programs. We analyzed current patterns in Twitter use among EM residency programs with accounts and assessed conformance with CORD recommendations. In this mixed methods study, a 6-question, anonymous survey was distributed via e-mail using SurveyMonkey. In addition, a Twitter-based search was conducted, and the public profiles of EM residency programs' Twitter accounts were analyzed. We calculated descriptive statistics and performed a qualitative analysis on the data. Of 168 Accreditation Council for Graduate Medical Education-accredited EM programs, 88 programs (52%) responded. Of those programs, 58% (51 of 88) reported having a program-level Twitter account. Residents served as content managers for those accounts in the majority of survey respondents (61%, 28 of 46). Most programs did not publicly disclose the identity or position of their Twitter content manager. We found a wide variety of applications for Twitter, with EM programs most frequently using Twitter for educational and promotional purposes. There is significant variability in the numbers of followers for EM programs' Twitter accounts. Applications and usage among EM residency programs are varied, and are frequently not consistent with current CORD recommendations.

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2007-06-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

2007-06-15

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Development of a standardized job description for healthcare managers of metabolic syndrome management programs in Korean community health centers.

Science.gov (United States)

Lee, Youngjin; Choo, Jina; Cho, Jeonghyun; Kim, So-Nam; Lee, Hye-Eun; Yoon, Seok-Jun; Seomun, GyeongAe

2014-03-01

This study aimed to develop a job description for healthcare managers of metabolic syndrome management programs using task analysis. Exploratory research was performed by using the Developing a Curriculum method, the Intervention Wheel model, and focus group discussions. Subsequently, we conducted a survey of 215 healthcare workers from 25 community health centers to verify that the job description we created was accurate. We defined the role of healthcare managers. Next, we elucidated the tasks of healthcare managers and performed needs analysis to examine the frequency, importance, and difficulty of each of their duties. Finally, we verified that our job description was accurate. Based on the 8 duties, 30 tasks, and 44 task elements assigned to healthcare managers, we found that the healthcare managers functioned both as team coordinators responsible for providing multidisciplinary health services and nurse specialists providing health promotion services. In terms of importance and difficulty of tasks performed by the healthcare managers, which were measured using a determinant coefficient, the highest-ranked task was planning social marketing (15.4), while the lowest-ranked task was managing human resources (9.9). A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs. Copyright © 2014. Published by Elsevier B.V.

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

Science.gov (United States)

2013-07-05

... description services for television are provided on a secondary audio stream, and typically a consumer can... box. The Commission recently adopted rules requiring apparatus that is designed to receive, play back, or record video programming transmitted simultaneously with sound to make secondary audio streams...

Management control system description

Energy Technology Data Exchange (ETDEWEB)

Bence, P. J.

1990-10-01

This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

The AutoBayes Program Synthesis System: System Description

Science.gov (United States)

Fischer, Bernd; Pressburger, Thomas; Rosu, Grigore; Schumann, Johann; Norvog, Peter (Technical Monitor)

2001-01-01

AUTOBAYES is a fully automatic program synthesis system for the statistical data analysis domain. Its input is a concise description of a data analysis problem in the form of a statistical model; its output is optimized and fully documented C/C++ code which can be linked dynamically into the Matlab and Octave environments. AUTOBAYES synthesizes code by a schema-guided deductive process. Schemas (i.e., code templates with associated semantic constraints) are applied to the original problem and recursively to emerging subproblems. AUTOBAYES complements this approach by symbolic computation to derive closed-form solutions whenever possible. In this paper, we concentrate on the interaction between the symbolic computations and the deductive synthesis process. A statistical model specifies for each problem variable (i.e., data or parameter) its properties and dependencies in the form of a probability distribution, A typical data analysis task is to estimate the best possible parameter values from the given observations or measurements. The following example models normal-distributed data but takes prior information (e.g., from previous experiments) on the data's mean value and variance into account.

Description of the CAREM Reactor Neutronic Calculation Codes

International Nuclear Information System (INIS)

Villarino, Eduardo; Hergenreder, Daniel

2000-01-01

In this work is described the neutronic calculation line used to design the CAREM reactor.A description of the codes used and the interfaces between the different programs are presented.Both, the normal calculation line and the alternative or verification calculation line are included.The calculation line used to obtain the kinetics parameters (effective delayed-neutron fraction and prompt-neutron lifetime) is also included

Firebird-III program description

International Nuclear Information System (INIS)

Lin, M.R.; Prawirosochardjo, S.; Rennick, D.F.; Wessman, E.; Blain, R.J.D.; Wilson, J.M.

1979-09-01

The FIREBIRD-III digital computer program is a general network code developed primarily for predicting the thermalhydraulic behaviour of CANDU power reactors during a postulated loss-of-coolant accident and the subsequent emergency coolant injection. Because of its flexibility, the code can also be used to solve a large variety of general two-phase flow problems. This report describes the thermalhydraulic models and the computation methods used in the program

41 CFR 301-73.1 - What does the Federal travel management program include?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What does the Federal travel management program include? 301-73.1 Section 301-73.1 Public Contracts and Property Management... PROGRAMS General Rules § 301-73.1 What does the Federal travel management program include? The Federal...

Civil Engineering Technology Program Guide.

Science.gov (United States)

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

Energy Technology Data Exchange (ETDEWEB)

Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2012-02-03

This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

Representation-free description of light-pulse atom interferometry including non-inertial effects

Energy Technology Data Exchange (ETDEWEB)

Kleinert, Stephan, E-mail: stephan.kleinert@uni-ulm.de [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Kajari, Endre; Roura, Albert [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Schleich, Wolfgang P. [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Texas A& M University Institute for Advanced Study (TIAS), Institute for Quantum Science and Engineering (IQSE) and Department of Physics and Astronomy, Texas A& M University College Station, TX 77843-4242 (United States)

2015-12-30

Light-pulse atom interferometers rely on the wave nature of matter and its manipulation with coherent laser pulses. They are used for precise gravimetry and inertial sensing as well as for accurate measurements of fundamental constants. Reaching higher precision requires longer interferometer times which are naturally encountered in microgravity environments such as drop-tower facilities, sounding rockets and dedicated satellite missions aiming at fundamental quantum physics in space. In all those cases, it is necessary to consider arbitrary trajectories and varying orientations of the interferometer set-up in non-inertial frames of reference. Here we provide a versatile representation-free description of atom interferometry entirely based on operator algebra to address this general situation. We show how to analytically determine the phase shift as well as the visibility of interferometers with an arbitrary number of pulses including the effects of local gravitational accelerations, gravity gradients, the rotation of the lasers and non-inertial frames of reference. Our method conveniently unifies previous results and facilitates the investigation of novel interferometer geometries.

RIMS Program Description.

Science.gov (United States)

Kraepelien, Hans

Computer routines for the translation of teacher-prepared mark sense forms to magnetic tape are described. The program, Receiving IMS (RIMS), is part of the Southwest Regional Laboratory's (SWRL) Instructional Management System (IMS). It accepts mark sense sheets from remotely located Xerox 660 scanner copiers and/or IMS update information from…

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

Science.gov (United States)

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

National Research Council Research Associateships Program with Methane Hydrates Fellowships Program/National Energy Technology Laboratory

Energy Technology Data Exchange (ETDEWEB)

Basques, Eric O. [National Academy of Sciences, Washington, DC (United States)

2014-03-20

This report summarizes work carried out over the period from July 5, 2005-January 31, 2014. The work was carried out by the National Research Council Research Associateships Program of the National Academies, under the US Department of Energy's National Energy Technology Laboratory (NETL) program. This Technical Report consists of a description of activity from 2005 through 2014, broken out within yearly timeframes, for NRC/NETL Associateships researchers at NETL laboratories which includes individual tenure reports from Associates over this time period. The report also includes individual tenure reports from associates over this time period. The report also includes descriptions of program promotion efforts, a breakdown of the review competitions, awards offered, and Associate's activities during their tenure.

TASAC a computer program for thermal analysis of severe accident conditions. Version 3/01, Dec 1991. Model description and user's guide

International Nuclear Information System (INIS)

Stempniewicz, M.; Marks, P.; Salwa, K.

1992-06-01

TASAC (Thermal Analysis of Severe Accident Conditions) is computer code developed in the Institute of Atomic Energy written in FORTRAN 77 for the digital computer analysis of PWR rod bundle behaviour during severe accident conditions. The code has the ability to model an early stage of core degradation including heat transfer inside the rods, convective and radiative heat exchange as well as cladding interactions with coolant and fuel, hydrogen generation, melting, relocations and refreezing of fuel rod materials with dissolution of UO 2 and ZrO 2 in liquid phase. The code was applied for the simulation of International Standard Problem number 28, performed on PHEBUS test facility. This report contains the program physical models description, detailed description of input data requirements and results of code verification. The main directions for future TASAC code development are formulated. (author). 20 refs, 39 figs, 4 tabs

Strategic environmental safety inspection for the National disposal program. Description of the inspection volume. Documentation for the scoping team

International Nuclear Information System (INIS)

2015-01-01

The Strategic environmental safety inspection for the National disposal program covers the following topics: Legal framework: determination of the requirement for an environmental inspection program, coordination of the scoping team into the overall context; environmental targets; approach for assessment and evaluation of environmental impact, description of the inspection targets for the strategic environmental inspection; consideration of alternatives.

Waste Management Systems Requirements and Descriptions (SRD)

International Nuclear Information System (INIS)

Conner, C.W.

1986-01-01

The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

System description of the Repository-Only System for the FY 1990 systems integration program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs

TD-S-HF single determinantal reaction theory and the description of many-body processes, including fission

International Nuclear Information System (INIS)

Griffin, J.J.; Lichtner, P.C.; Dworzecka, M.; Kan, K.K.

1979-01-01

The restrictions implied for the time dependent many-body reaction theory by the (TDHF) single determinantal assumption are explored by constructive analysis. A restructured TD-S-HF reaction theory is modelled, not after the initial-value form of the Schroedinger reaction theory, but after the (fully equivalent) S-matrix form, under the conditions that only self-consistent TDHF solutions occur in the theory, every wave function obeys the fundamental statistical interpretation of quantum mechanics, and the theory reduces to the exact Schroedinger theory for exact solutions which are single determinantal. All of these conditions can be accomodated provided that the theory is interpreted on a time-averaged basis, i.e., physical constants of the Schroedinger theory which are time-dependent in the TDHF theory, are interpreted in TD-S-HF in terms of their time averaged values. The resulting reaction theory, although formulated heuristically, prescribes a well defined and unambiguous calculational program which, although somewhat more demanding technically than the conventional initial-value TDHF method, is nevertheless more consonant with first principles, structurally and mechanistically. For its physical predictions do not depend upon the precise location of the distant measuring apparatus, and are in no way influenced by the spurious cross channel correlations which arise whenever the description of many reaction channels is imposed upon one single-determinantal solution. For nuclear structure physics, the TDHF-eigenfunctions provide the first plausible description of exact eigenstates in the time-dependent framework; moreover, they are unencumbered by any restriction to small amplitudes. 14 references

Involvement of the US Department of Defense in Civilian Assistance, Part I: a quantitative description of the projects funded by the Overseas Humanitarian, Disaster, and Civic Aid Program.

Science.gov (United States)

Bourdeaux, Margaret Ellis; Lawry, Lynn; Bonventre, Eugene V; Burkle, Frederick M

2010-03-01

To review the history and goals of the US Department of Defense's largest civilian assistance program, the Overseas Humanitarian, Disaster and Civic Aid Program and to describe the number, geographic regions, years, key words, countries, and types of projects carried out under this program since 2001. Using the program's central database, we reviewed all approved projects since 2001 and tabulated them by year, combatant command, country, and key word. We also reviewed the project descriptions of projects funded between January 1, 2006, and February 9, 2008, and examined how their activities varied by combatant command and year. Of the 5395 projects in the database, 2097 were funded. Projects took place in more than 90 countries, with Southern, Pacific, and Africa Command hosting the greatest number. The most common types of projects were school, health, disaster response, and water infrastructure construction, and disaster-response training. The "global war on terror" was the key word most frequently tagged to project descriptions. Project descriptions lacked stated goals as well as implementation and coordination strategies with potential partners, and did not report outcome or impact indicators. The geographic reach of the program is vast and projects take place in a wide variety of public sectors. Yet their security and civilian assistance value remains unclear given the lack of stated project goals, implementation strategies, or measures of effectiveness. To facilitate transparency and policy discussion, we recommend project proposals include hypotheses as to how they will enhance US security, their relevance to the public sector they address, and outcome and impact indicators that can assess their value and effectiveness.

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification

International Nuclear Information System (INIS)

1993-08-01

The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

Science.gov (United States)

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

NRC program for the resolution of generic issues related to nuclear power plants. (Includes plans for the resolution of ''unresolved safety issues'' pursuant to Section 210 of the Energy Reorganization Act of 1974, as amended)

International Nuclear Information System (INIS)

1977-12-01

This report provides a description of the Nuclear Regulatory Commission's Program for the Resolution of Generic Issues Related to Nuclear Power Plants. The NRC program is of considerably broader scope than the ''Unresolved Safety Issues Plan'' required by Section 210. The NRC program does include plans for the resolution of ''Unresolved Safety Issues''; however, in addition, it includes generic tasks for the resolution of environmental issues, for the development of improvements in the reactor licensing process and for consideration of less conservative design criteria or operating limitations in areas where over conservatisms may be unnecessarily restrictive or costly

A Mobile Health App-Based Postnatal Educational Program (Home-but not Alone): Descriptive Qualitative Study.

Science.gov (United States)

Shorey, Shefaly; Yang, Yen Yen; Dennis, Cindy-Lee

2018-04-19

The postnatal period poses numerous challenges for new parents. Various educational programs are available to support new parents during this stressful period. However, the usefulness of educational programs must be evaluated to ascertain their credibility. The aim of this descriptive, qualitative study was to explore the views of parents of newborns with regard to the content and delivery of a mobile health (mHealth) app-based postnatal educational program. A qualitative semistructured interview guide was used to collect data from 17 participants who belonged to the intervention group of a randomized controlled trial. The intervention, a 4-week-long access to a mHealth app-based educational program, was evaluated. The interviews were conducted in English and at the participants' homes. Thematic analysis was used to analyze the data. The Consolidated Criteria for Reporting Qualitative Research checklist was used to report the findings. The interviews revealed 4 main themes: (1) positive features of the mHealth app, (2) advice from midwives, (3) experiences gained from using the mHealth app, and (4) recommendations for the future. The participants evaluated the educational program to be a good source of information that was tailored to the local context. The different modes of delivery, including audio and video, accentuated the accessibility of information. The parents evaluated that the facilitator of the featured communication platform, a midwife, provided trustworthy advice. Belongingness to a virtual community beyond the hospital endowed the parents the confidence that they were not alone and were supported by other parents and health care professionals. According to the parents, the mHealth app-based educational program was helpful in supporting a multi-ethnic sample of parents during the postnatal period. This insight indicates that the program could be implemented in a wide community of parents in the postnatal period. The helpfulness of the educational

TASAC a computer program for thermal analysis of severe accident conditions. Version 3/01, Dec 1991. Model description and user`s guide

Energy Technology Data Exchange (ETDEWEB)

Stempniewicz, M; Marks, P; Salwa, K

1992-06-01

TASAC (Thermal Analysis of Severe Accident Conditions) is computer code developed in the Institute of Atomic Energy written in FORTRAN 77 for the digital computer analysis of PWR rod bundle behaviour during severe accident conditions. The code has the ability to model an early stage of core degradation including heat transfer inside the rods, convective and radiative heat exchange as well as cladding interactions with coolant and fuel, hydrogen generation, melting, relocations and refreezing of fuel rod materials with dissolution of UO{sub 2} and ZrO{sub 2} in liquid phase. The code was applied for the simulation of International Standard Problem number 28, performed on PHEBUS test facility. This report contains the program physical models description, detailed description of input data requirements and results of code verification. The main directions for future TASAC code development are formulated. (author). 20 refs, 39 figs, 4 tabs.

GetData Digitizing Program Code: Description, Testing, Training

International Nuclear Information System (INIS)

Taova, S.

2013-01-01

90 percents of compilation in our center is obtained by data digitizing. So we are rather interested in the development of different techniques of data digitizing. Plots containing a great amount of points and solid lines are most complicated for digitizing. From our point of view including to the Exfor-Digitizer procedures of automatic or semi-automatic digitizing will allow to simplify significantly this process. We managed to test some free available program codes. Program GETDATA Graph Digitizer (www.getdata- graph-digitizer.com) looks more suitable for our purposes. GetData Graph Digitizer is a program for digitizing graphs, plots and maps. Main features of GetData Graph Digitizer are: - supported graphics formats are TIFF, JPEG, BMP and PCX; - two algorithms for automatic digitizing; - convenient manual digitizing; - reorder tool for easy points reordering; - save/open workspace, which allows to save the work and return to it later; - obtained data can be exported to the clipboard; - export to the formats: TXT (text file), XLS (MS Excel), XML, DXF (AutoCAD) and EPS (PostScript). GetData Graph Digitizer includes two algorithms for automatic digitizing. Auto trace lines: This method is designed to digitize solid lines. Choose the starting point, and the program will trace the line, stopping at it's end. To trace the line use Operations =>Auto trace lines menu or context menu ('Auto trace lines' item). To choose starting point click left mouse button, or click right mouse button to additionally choose direction for line tracing. Digitize area: The second way is to set digitizing area. This method works for any type of lines, including dashed lines. Data points are set at the intersection of grid with the line. You can choose the type of grid (X grid or Y grid), and set the distance between grid lines. You can also make the grid be shifted in such a way, that it will pass through a specific X (or Y) value. To digitize area use Operations →Digitize area menu

Marketing University Outreach Programs.

Science.gov (United States)

Foster, Ralph S., Jr., Ed.; And Others

A collection of 12 essays and model program descriptions addresses issues in the marketing of university extension, outreach, and distance education programs. They include: (1) "Marketing and University Outreach: Parallel Processes" (William I. Sauser, Jr. and others); (2) "Segmenting and Targeting the Organizational Market"…

Microscopic description of production cross sections including deexcitation effects

Science.gov (United States)

Sekizawa, Kazuyuki

2017-07-01

Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

Quality Assurance Requirements and Description

International Nuclear Information System (INIS)

Ram Murthy

2002-01-01

The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

Description of a medical writing rotation for a postgraduate pharmacy residency program.

Science.gov (United States)

Brown, Jamie N; Tiemann, Kelsey A; Ostroff, Jared L

2014-04-01

To provide a description of a pharmacy residency rotation dedicated to medical writing developed at a tertiary care academic medical center. Contribution to the medical literature is an important component of professional pharmacy practice, and there are many benefits seen by practitioners actively involved in scholarly activities. Residency programs have an opportunity to expand beyond the standard roles of postgraduate pharmacist training but rarely is there formal instruction on medical writing skills or are scholarship opportunities provided to residents. In order to address this deficiency, a residency program may consider the implementation of a formal Medical Writing rotation. This rotation is designed to introduce the resident to medical writing through active discussion on medical writing foundational topics, engage the resident in a collaborative review of a manuscript submitted to a peer-reviewed professional journal, and support the resident in the design and composition of manuscript of publishable quality. A structured Medical Writing rotation during a pharmacy resident's training can help develop the skills necessary to promote scholarly activities and foster resident interest in future pursuit of professional medical writing.

NRC/RSR Data Bank Program description

International Nuclear Information System (INIS)

Bankert, S.F.

1979-01-01

The United States Nuclear Regulatory Commission (NRC) has established the NRC/Reactor Safety Research (RSR) Data Bank Program to collect, store, and make available data from the many domestic and foreign water reactor safety research programs. Local direction of the program is provided by EG and G Idaho, Inc., at Idaho National Engineering Laboratory. The NRC/RSR Data Bank Program provides a central computer storage mechanism and access software for data to be used by code development and assessment groups in meeting the code and correlation needs of the nuclear industry. The administrative portion of the program provides data entry, documentation, and training and advisory services to users and the NRC. The NRC/RSR Data Bank Program and the capabilities of the data access software are described

Technical baseline description for in situ vitrification laboratory test equipment

International Nuclear Information System (INIS)

Beard, K.V.; Bonnenberg, R.W.; Watson, L.R.

1991-09-01

IN situ vitrification (ISV) has been identified as possible waste treatment technology. ISV was developed by Pacific Northwest Laboratory (PNL), Richland, Washington, as a thermal treatment process to treat contaminated soils in place. The process, which electrically melts and dissolves soils and associated inorganic materials, simultaneously destroys and/or removes organic contaminants while incorporating inorganic contaminants into a stable, glass-like residual product. This Technical Baseline Description has been prepared to provide high level descriptions of the design of the Laboratory Test model, including all design modifications and safety improvements made to data. Furthermore, the Technical Baseline Description provides a basic overview of the interface documents for configuration management, program management interfaces, safety, quality, and security requirements. 8 figs

15 CFR 16.2 - Description and goal of program.

Science.gov (United States)

2010-01-01

... particular advantages of their products. These objectives are accomplished by: (1) Selecting or developing.... (c) For selected categories of consumer products, the program includes advertising guidelines covering situations where quantitative performance values are stated in advertising or where qualitative...

NWTS waste package program plan. Volume I. Program strategy, description, and schedule

International Nuclear Information System (INIS)

1981-10-01

This document describes the work planned for developing the technology to design, test and produce packages used for the long-term isolation of nuclear waste in deep geologic repositories. Waste forms considered include spent fuel and high-level waste. The testing and selection effort for barrier materials for radionuclide containment is described. The NWTS waste package program is a design-driven effort; waste package conceptual designs are used as input for preliminary designs, which are upgraded to a final design as materials and testing data become available. Performance assessment models are developed and validated. Milestones and a detailed schedule are given for the waste package development effort. Program logic networks defining work flow, interfaces among the NWTS Projects, and interrelationships of specific activities are presented. Detailed work elements are provided for the Waste Package Program Plan subtasks - design and development, waste form, barrier materials, and performance evaluation - for salt and basalt, host rocks for which the state of waste package knowledge and the corresponding data base are advanced

LASL's FY 1978 supporting research program

International Nuclear Information System (INIS)

Hammel, E.F.; Merlan, S.J.; Freiwald, D.A.

1978-09-01

This report gives a brief overview of Los Alamos Scientific Laboratory's supporting research program, including philosophy, management and program analysis, funding, and a brief description of the kinds of work currently supported. 10 figures

Regulatory research and support program for 1993/1994 - project descriptions

International Nuclear Information System (INIS)

1993-01-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year's program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M

Regulatory research and support program for 1993/1994 - project descriptions

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year`s program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M.

Developmental Light-Water Reactor Program

International Nuclear Information System (INIS)

Forsberg, C.W.

1989-12-01

This report summarizes the progress of the Developmental Light-Water Reactor (DLWR) Program at Oak Ridge National Laboratory in FY 1989. It also includes (1) a brief description of the program, (2) definition of goals, (3) earlier achievements, and (4) proposed future activities

A new kinetic description for turbulent collisions including mode-coupling

International Nuclear Information System (INIS)

Misguich, J.H.; Tchen, C.M.

1982-07-01

The usual introduction of higher-order mode-coupling terms in the description of turbulent collisions beyond usual Renormalized Quasi-Linear approximation (RQL) is briefly analyzed. Here new results are derived in the framework of the general kinetic theory, and the equivalence is proved with the long time limit of simple results deduced from the Vlasov equation. The correction to the RQL turbulent collision term is analyzed and a new approximation is proposed. Turbulent collisions are also described by perturbation around the Lagrangian autocorrelation of fluctuating fields. For an homogeneous turbulence, however, the asymptotic integral of this Lagrangian autocorrelation vanishes identically, similarly to what occurs in Brownian motion. For inhomogeneous turbulence this method can nevertheless be used, and higher-order mode-coupling terms can be interpreted as a shielding of elementary Lagrangian turbulent collisions

Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

International Nuclear Information System (INIS)

1993-11-01

This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

12 CFR 361.6 - What outreach efforts are included in this program?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false What outreach efforts are included in this program? 361.6 Section 361.6 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY MINORITY AND WOMEN OUTREACH PROGRAM CONTRACTING § 361.6 What outreach efforts...

Conceptual modular description of the high-level waste management system for system studies model development

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1992-08-01

This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions

The diffusion of the distance Entomology Master's Degree Program at the University of Nebraska Lincoln: A descriptive case study

Science.gov (United States)

Hubbell, Jody M.

This study explored three selected phases of Rogers' (1995) Diffusion of Innovations Theory to examine the diffusion process of the distance Entomology Master's Degree program at the University of Nebraska, Lincoln. A qualitative descriptive case study approach incorporated semi-structured interviews with individuals involved in one or more of the three stages: Development, Implementation, and Institutionalization. Documents and archival evidence were used to triangulate findings. This research analyzed descriptions of the program as it moved from the Development, to the Implementation, and finally, the Institutionalization stages of diffusion. Each respective stage was examined through open and axial coding. Process coding identified themes common to two or more diffusion stages, and explored the evolution of themes from one diffusion stage to the next. At a time of significant budget constraints, many departments were faced with the possibility of merger or dissolution. The Entomology Master's Degree Program evolved from being an entrepreneurial means to prevent departmental dissolution to eventually being viewed as a model for the development of similar programs across this university and other institutions of higher education. During this evolution, the program was reinvented to meet the broader needs of industry and a global student market. One finding not consistent with Rogers' model was that smaller, rather than larger, departmental size contributed to the success of the program. Within this small department, faculty members were able to share their experiences and knowledge with each other on a regular basis, which promoted greater acceptance of the distance program. How quality and rigor may be defined and measured was a key issue in each respective stage. In this specific case, quality and rigor was initially a comparison of on-campus and distance course content and then moved to program-based assessment and measures of student outcomes such as job

Basic Gasoline Engine Mechanics. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a basic gasoline engine mechanics program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

Clean Coal Technology Demonstration Program: Program Update 1998

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

"In Our Corner": A Qualitative Descriptive Study of Patient Engagement in a Community-Based Care Coordination Program.

Science.gov (United States)

Sefcik, Justine S; Petrovsky, Darina; Streur, Megan; Toles, Mark; O'Connor, Melissa; Ulrich, Connie M; Marcantonio, Sherry; Coburn, Ken; Naylor, Mary D; Moriarty, Helene

2018-03-01

The purpose of this study was to explore participants' experience in the Health Quality Partners (HQP) Care Coordination Program that contributed to their continued engagement. Older adults with multiple chronic conditions often have limited engagement in health care services and face fragmented health care delivery. This can lead to increased risk for disability, mortality, poor quality of life, and increased health care utilization. A qualitative descriptive design with two focus groups was conducted with a total of 20 older adults enrolled in HQP's Care Coordination Program. Conventional content analysis was the analytical technique. The overarching theme resulting from the analysis was "in our corner," with subthemes "opportunities to learn and socialize" and "dedicated nurses," suggesting that these are the primary contributing factors to engagement in HQP's Care Coordination Program. Study findings suggest that nurses play an integral role in patient engagement among older adults enrolled in a care coordination program.

Quality Assurance Program Description

Energy Technology Data Exchange (ETDEWEB)

Halford, Vaughn Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ryder, Ann Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-07-01

Effective May 1, 2017, led by a new executive leadership team, Sandia began operating within a new organizational structure. National Technology and Engineering Solutions of Sandia (Sandia’s) Quality Assurance Program (QAP) was established to assign responsibilities and authorities, define workflow policies and requirements, and provide for the performance and assessment of work.

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

Science.gov (United States)

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

Process Evaluation for a Prison-based Substance Abuse Program.

Science.gov (United States)

Staton, Michele; Leukefeld, Carl; Logan, T. K.; Purvis, Rick

2000-01-01

Presents findings from a process evaluation conducted in a prison-based substance abuse program in Kentucky. Discusses key components in the program, including a detailed program description, modifications in planned treatment strategies, program documentation, and perspectives of staff and clients. Findings suggest that prison-based programs have…

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Bechtel Jacobs

2009-02-26

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

Plutonium immobilization project development and testing technical project office quality assurance program description

International Nuclear Information System (INIS)

Gould, T.H.; MacLean, L.M.; Ziemba, J.M.

1999-01-01

The Plutonium Immobilization Project (PIP) is one of several fissile materials disposition projects managed by the Department of Energy (DOE) Office of Fissile Materials Disposition (OFMD). The PIP is expected to evolve from the current Development and Testing (D and T) effort, to design, to construction, and finally to operations. Overall management and technical management of the D and T effort resides at the Lead Laboratory, Lawrence Livermore National Laboratory (LLNL), through the LLNL Manager, Fissile Materials Disposition Program (FMDP). Day to day project activities are managed by the D and T Technical Project Office (TPO), which reports to the LLNL Manager, FMDP. The D and T TPO consists of the Technical Manager, the TPO Quality Assurance (QA) Program Manager, and TPO Planning and Support Staff. This Quality Assurance Program Description (QAPD) defines the QA policies and controls that will be implemented by these TPO personnel in their management of D and T activities. This QAPD is consistent with and responsive to the Department of Energy Fissile Materials Disposition Program Quality Assurance Requirements Document (FMDP QARD). As the Project and upper level requirement's documents evolve, this QAPD will be updated as necessary to accurately define and describe the QA Program and Management of the PIP. The TPO has a policy that all development and testing activities be planned, performed and assessed in accordance with its customer's requirements, needs and expectations, and with a commitment to excellence and continuous improvement. The TPO QAPD describes implementation requirements which, when completed, will ensure that the project development and testing activities conform to the appropriate QA requirements. For the program to be effective, the TPO QA Program Manager will ensure that each site participating in D and T activities has developed a QAPD, which meets the customer's requirements, and has a designated quality leader in place. These customer

Descriptive study of external employee assistance program providers (EAP) in Japan.

Science.gov (United States)

Muto, Takashi; Haruyama, Yasuo; Higashi, Toshiaki

2012-01-01

The mental health problems of employees have become a major occupational health issue in Japan. External employee assistance program providers (EAP) have become important in mental health care for workers, but their activities are poorly documented. This descriptive study was undertaken to clarify the status and future tasks of EAP in Japan. The subjects were all EAP (n=27) registered in the Japanese Chapter of Employee Assistance Professionals Association. The questionnaire survey was conducted in January 2007. We received 13 replies, a response rate of 54.2%. Most EAP provided seminars, stress checks, stress management, counseling, and support for a return to work. The number of EAP contracted with small-scale enterprises was small. EAP communicated infrequently with companies. To promote the use of EAP, their advertising, education and training of staff, accumulation of scientific evidence, development of an official certification system for staff, and improvement of contents of EAP services were cited.

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

OpenAIRE

Colantonio, A.

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subj...

Guidelines for Description

NARCIS (Netherlands)

Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

2013-01-01

The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

Solid Waste Program technical baseline description

Energy Technology Data Exchange (ETDEWEB)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

12 CFR 906.12 - What outreach efforts are included in this program?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What outreach efforts are included in this program? 906.12 Section 906.12 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE... Minorities, Women, or Individuals With Disabilities § 906.12 What outreach efforts are included in this...

Physics 3204. Course Description.

Science.gov (United States)

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

SIMON. A computer program for reliability and statistical analysis using Monte Carlo simulation. Program description and manual

International Nuclear Information System (INIS)

Kongsoe, H.E.; Lauridsen, K.

1993-09-01

SIMON is a program for calculation of reliability and statistical analysis. The program is of the Monte Carlo type, and it is designed with high flexibility, and has a large potential for application to complex problems like reliability analyses of very large systems and of systems, where complex modelling or knowledge of special details are required. Examples of application of the program, including input and output, for reliability and statistical analysis are presented. (au) (3 tabs., 3 ills., 5 refs.)

EBT time-dependent point model code: description and user's guide

International Nuclear Information System (INIS)

Roberts, J.F.; Uckan, N.A.

1977-07-01

A D-T time-dependent point model has been developed to assess the energy balance in an EBT reactor plasma. Flexibility is retained in the model to permit more recent data to be incorporated as they become available from the theoretical and experimental studies. This report includes the physics models involved, the program logic, and a description of the variables and routines used. All the files necessary for execution are listed, and the code, including a post-execution plotting routine, is discussed

Computer-Aided Corrosion Program Management

Science.gov (United States)

MacDowell, Louis

2010-01-01

This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

Model for safety reports including descriptive examples

International Nuclear Information System (INIS)

1995-12-01

Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository

GGP Program Description, 2006-2011 | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-22

Dec 22, 2010 ... This document explains the context and orientation of the IDRC's Globalization, Growth and Poverty (GGP) program initiative for the 2006-11 period, detailing the GGP program's objectives, research areas, cross-cutting themes, and programming approach.Download the PDF : Globalization, Growth and ...

Developing An Internship Program.

Science.gov (United States)

Chase, Valerie

1984-01-01

Provided are suggestions for developing museum/aquarium internship programs. These include writing detailed job descriptions, advertising, designing application forms asking all the information needed, supervising the interns, interviewing applicants as they were applying for a paid position, and others. (JN)

Validation of a Poison Prevention Program.

Science.gov (United States)

Gill, Noel C.; Braden, Barbara T.

Two way analyses of variance and cross-group descriptive comparisons assessed the effectiveness of the Siop Poison Prevention Program, which included an educational program and the use of warning labels, on improving verbal and visual discrimination of poisonous and nonpoisonous products for preschool children. The study sample consisted of 156…

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-07-08

The regulatory research program is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year.

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

International Nuclear Information System (INIS)

1986-01-01

The regulatory research program is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year

Quality Assurance Program description, Defense Waste Processing Facility (DWPF)

International Nuclear Information System (INIS)

Maslar, S.R.

1992-01-01

This document describes the Westinghouse Savannah River Company's (WSRC) Quality Assurance Program for Defense Waste Processing at the Savannah River Site (SRS). WSRC is the operating contractor for the US Department of Energy (DOE) at the SRS. The following objectives are achieved through developing and implementing the Quality Assurance Program: (1) Ensure that the attainment of quality (in accomplishing defense high-level waste processing objectives at the SRS) is at a level commensurate with the government's responsibility for protecting public health and safety, the environment, the public investment, and for efficiently and effectively using national resources. (2) Ensure that high-level waste from qualification and production activities conform to requirements defined by OCRWM. These activities include production processes, equipment, and services; and products that are planned, designed, procured, fabricated, installed, tested, operated, maintained, modified, or produced

TREDRA, Minimal Cut Sets Fault Tree Plot Program

International Nuclear Information System (INIS)

Fussell, J.B.

1983-01-01

1 - Description of problem or function: TREDRA is a computer program for drafting report-quality fault trees. The input to TREDRA is similar to input for standard computer programs that find minimal cut sets from fault trees. Output includes fault tree plots containing all standard fault tree logic and event symbols, gate and event labels, and an output description for each event in the fault tree. TREDRA contains the following features: a variety of program options that allow flexibility in the program output; capability for automatic pagination of the output fault tree, when necessary; input groups which allow labeling of gates, events, and their output descriptions; a symbol library which includes standard fault tree symbols plus several less frequently used symbols; user control of character size and overall plot size; and extensive input error checking and diagnostic oriented output. 2 - Method of solution: Fault trees are generated by user-supplied control parameters and a coded description of the fault tree structure consisting of the name of each gate, the gate type, the number of inputs to the gate, and the names of these inputs. 3 - Restrictions on the complexity of the problem: TREDRA can produce fault trees with a minimum of 3 and a maximum of 56 levels. The width of each level may range from 3 to 37. A total of 50 transfers is allowed during pagination

Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

Energy Technology Data Exchange (ETDEWEB)

Schneider, K.J.

1982-09-01

The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

International Nuclear Information System (INIS)

Schneider, K.J.

1982-09-01

The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation

The Role of Extension Nutrition Education in Student Achievement of Nutrition Standards in Grades K-3: A Descriptive Evaluation of a School-Based Program

Science.gov (United States)

Arnold, Mary E.; Schreiber, Debera

2012-01-01

This article reports the results of a descriptive evaluation of the impact of an in-school Extension nutrition education program in a small, very rural county. The evaluation focused on understanding the nature of the role the Extension educator plays in delivering nutrition education, the impact of the program on student learning and achievement…

Atmospheric Sciences Program summaries of research in FY 1993

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This document describes the activities and products of the Atmospheric Science Program of the Environmental Sciences Division, Office of Health and Environmental Research, Office of Energy Research, in FY 1993. Each description contains the project`s title; three-year funding history; the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date. Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded by a brief text that defines the program area, states its goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used. This document has been indexed to aid the reader in locating research topics, participants, and research institutions in the text and the project descriptions. Comprehensive subject, principal investigator, and institution indexes are provided at the end of the text for this purpose. The comprehensive subject index includes keywords from the introduction and chapter texts in addition to those from the project descriptions.

INTERLINE, a railroad routing model: program description and user's manual

International Nuclear Information System (INIS)

Peterson, B.E.

1985-11-01

INTERLINE is an interactive computer program that finds likely routes for shipments over the US railroad system. It is based on a shortest path algorithm modified both to reflect the nature of railroad company operations and to accommodate computer resource limitations in dealing with a large transportation network. The first section of the report discusses the nature of railroad operations and routing practices in the United States, including the tendency to concentrate traffic on a limited number of mainlines, the competition for traffic by different companies operating in the same corridors, and the tendency of originating carriers to retain traffic on their systems before transferring it to terminating carriers. The theoretical foundation and operation of shortest path algorithms are described, as well as the techniques used to simulate actual operating practices within this framework. The second section is a user's guide that describes the program operation and data structures, program features, and user access. 11 refs., 11 figs

Clean Coal Technology Programs: Program Update 2003 (Volume 1)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-A: Resource description, program history, wells tested, university and company based research, site restoration

Energy Technology Data Exchange (ETDEWEB)

John, C.J.; Maciasz, G.; Harder, B.J.

1998-06-01

The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Geopressured-geothermal resource description; Resource origin and sediment type; Gulf Coast resource extent; Resource estimates; Project history; Authorizing legislation; Program objectives; Perceived constraints; Program activities and structure; Well testing; Program management; Program cost summary; Funding history; Resource characterization; Wells of opportunity; Edna Delcambre No. 1 well; Edna Delcambre well recompletion; Fairfax Foster Sutter No. 2 well; Beulah Simon No. 2 well; P.E. Girouard No. 1 well; Prairie Canal No. 1 well; Crown Zellerbach No. 2 well; Alice C. Plantation No. 2 well; Tenneco Fee N No. 1 well; Pauline Kraft No. 1 well; Saldana well No. 2; G.M. Koelemay well No. 1; Willis Hulin No. 1 well; Investigations of other wells of opportunity; Clovis A. Kennedy No. 1 well; Watkins-Miller No. 1 well; Lucien J. Richard et al No. 1 well; and the C and K-Frank A. Godchaux, III, well No. 1.

Reactor safety research program. A description of current and planned reactor safety research sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research

International Nuclear Information System (INIS)

1975-06-01

The reactor safety research program, sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research, is described in terms of its program objectives, current status, and future plans. Elements of safety research work applicable to water reactors, fast reactors, and gas cooled reactors are presented together with brief descriptions of current and planned test facilities. (U.S.)

Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification. Revision 3, Part 2

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program.

Practical database programming with Java

CERN Document Server

Bai, Ying

2011-01-01

"This important resource offers a detailed description about the practical considerations and applications in database programming using Java NetBeans 6.8 with authentic examples and detailed explanations. This book provides readers with a clear picture as to how to handle the database programming issues in the Java NetBeans environment. The book is ideal for classroom and professional training material. It includes a wealth of supplemental material that is available for download including Powerpoint slides, solution manuals, and sample databases"--

Translation of a High-Level Temporal Model into Lower Level Models: Impact of Modelling at Different Description Levels

DEFF Research Database (Denmark)

Kraft, Peter; Sørensen, Jens Otto

2001-01-01

The paper attempts theoretically to clarify the interrelation between various levels of descriptions used in the modelling and the programming of information systems. We suggest an analysis where we characterise the description levels with respect to how precisely they may handle information abou...... and other textual models. We also consider the aptness of models that include procedural mechanisms such as active and object databases...

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle descriptions

Energy Technology Data Exchange (ETDEWEB)

1979-12-01

The Nonproliferation Alternative Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates. Volume IX is divided into three sections: Chapter 1, Reactor Systems; Chapter 2, Fuel-Cycle Systems; and the Appendixes. Chapter 1 contains the characterizations of the following 12 reactor types: light-water reactor; heavy-water reactor; water-cooled breeder reactor; high-temperature gas-cooled reactor; gas-cooled fast reactor; liquid-metal fast breeder reactor; spectral-shift-controlled reactor; accelerator-driven reactor; molten-salt reactor; gaseous-core reactor; tokamak fusion-fisson hybrid reactor; and fast mixed-spectrum reactor. Chapter 2 contains similar information developed for fuel-cycle facilities in the following categories: mining and milling; conversion and enrichment; fuel fabrication; spent fuel reprocessing; waste handling and disposal; and transportation of nuclear materials.

Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle descriptions

International Nuclear Information System (INIS)

1979-12-01

The Nonproliferation Alternative Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates. Volume IX is divided into three sections: Chapter 1, Reactor Systems; Chapter 2, Fuel-Cycle Systems; and the Appendixes. Chapter 1 contains the characterizations of the following 12 reactor types: light-water reactor; heavy-water reactor; water-cooled breeder reactor; high-temperature gas-cooled reactor; gas-cooled fast reactor; liquid-metal fast breeder reactor; spectral-shift-controlled reactor; accelerator-driven reactor; molten-salt reactor; gaseous-core reactor; tokamak fusion-fisson hybrid reactor; and fast mixed-spectrum reactor. Chapter 2 contains similar information developed for fuel-cycle facilities in the following categories: mining and milling; conversion and enrichment; fuel fabrication; spent fuel reprocessing; waste handling and disposal; and transportation of nuclear materials

An adaptive maneuvering logic computer program for the simulation of one-on-one air-to-air combat. Volume 1: General description

Science.gov (United States)

Burgin, G. H.; Fogel, L. J.; Phelps, J. P.

1975-01-01

A technique for computer simulation of air combat is described. Volume 1 decribes the computer program and its development in general terms. Two versions of the program exist. Both incorporate a logic for selecting and executing air combat maneuvers with performance models of specific fighter aircraft. In the batch processing version the flight paths of two aircraft engaged in interactive aerial combat and controlled by the same logic are computed. The realtime version permits human pilots to fly air-to-air combat against the adaptive maneuvering logic (AML) in Langley Differential Maneuvering Simulator (DMS). Volume 2 consists of a detailed description of the computer programs.

Designing monitoring programs for chemicals of emerging concern in potable reuse--what to include and what not to include?

Science.gov (United States)

Drewes, J E; Anderson, P; Denslow, N; Olivieri, A; Schlenk, D; Snyder, S A; Maruya, K A

2013-01-01

This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than '1' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound.

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

Energy Technology Data Exchange (ETDEWEB)

Petersen, G.; Bair, K.; Ross, J. [eds.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

Integrating declarative knowledge programming styles and tools for building expert systems

Energy Technology Data Exchange (ETDEWEB)

Barbuceanu, M; Trausan-Matu, S; Molnar, B

1987-01-01

The XRL system reported in this paper is an integrated knowledge programming environment whose major research theme is the investigation of declarative knowledge programming styles and features and of the way they can be effectively integrated and used to support AI programming. This investigation is carried out in the context of the structured-object representation paradigm which provides the glue keeping XRL components together. The paper describes several declarative programming styles and associated support tools available in XRL. These include an instantiation system supporting a generalized view of the ubiquous frame installation process, a description based programming system providing a novel declarative programming style which embeds a mathematical oriented description language in the structured object environment and a transformational interpreter for using it, a semantics oriented programming framework which offers a specific semantic construct based approach supporting maintenance and evolution and a self description and self generation tool which applies the latter approach to XRL itself. 29 refs., 16 figs.

Collectively loading programs in a multiple program multiple data environment

Science.gov (United States)

Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

2016-11-08

Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

Civil Defense, U. S. A.: A Programmed Orientation to Civil Defense. Unit 4. Warning, Emergency Operations, and Support Programs.

Science.gov (United States)

Defense Civil Preparedness Agency (DOD), Battle Creek, MI.

The need for, and a description of, emergency functions required to save lives and protect property in nuclear or natural disasters are presented. Topics discussed include: (1) The Civil Defense Warning System, (2) Introduction to the Emergency Operations Program, (3) Five subprograms of the Emergency Operations Program, (4) Emergency Operations…

Description of an engineering-scale facility for uranium fluorination studies

International Nuclear Information System (INIS)

Yagi, Eiji; Saito, Shinichi; Horiuchi, Masato

1976-03-01

In the research program of power reactor fuel reprocessing by fluoride volatility process, the engineering facility was constructed to establish the techniques of handling kilogram quantities of fluorine and uranium hexafluoride and to obtain engineering data on the uranium fluidized-bed oxidation and fluorination. This facility is designed for a capacity of 5 kg per batch. Descriptions on the facility and equipment are given, including design philosophy, safety and its analysis. (auth.)

75 FR 16562 - High-Speed Intercity Passenger Rail (HSIPR) Program

Science.gov (United States)

2010-04-01

...), passenger traffic and services (marketing, ticketing, station, and on- board services), and general... retention, ``green'' environmental outcomes, potential energy savings, and effects on community livability. Program Management Approach--A phased program implementation strategy including a preliminary description...

24 CFR 570.206 - Program administrative costs.

Science.gov (United States)

2010-04-01

... preliminary surveys and analysis of market needs; (2) Site and utility plans, narrative descriptions of the... the salary, wages, and related costs of each person whose job includes any program administration...

Department of Energy WindSentinel Loan Program Description

Energy Technology Data Exchange (ETDEWEB)

Shaw, William J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sturges, Mark H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-12-01

The U.S. Department of Energy (DOE) currently owns two AXYS WindSentinel buoys that collect a comprehensive set of meteorological and oceanographic data to support resource characterization for wind energy offshore. The two buoys were delivered to DOE’s Pacific Northwest National Laboratory (PNNL) in September, 2014. After acceptance testing and initial performance testing and evaluation at PNNL’s Marine Sciences Laboratory in Sequim, Washington, the buoys have been deployed off the U.S. East Coast. One buoy was deployed approximately 42 km east of Virginia Beach, Virginia from December, 2014 through June, 2016. The second buoy was deployed approximately 5 km off Atlantic City, New Jersey in November, 2015. Data from the buoys are available to the public. Interested parties can create an account and log in to http://offshoreweb.pnnl.gov. In response to a number of inquiries and unsolicited proposals, DOE’s Wind Energy Technologies Office is implementing a program, to be managed by PNNL, to lend the buoys to qualified parties for the purpose of acquiring wind resource characterization data in areas of interest for offshore wind energy development. This document describes the buoys, the scope of the loans, the process of how borrowers will be selected, and the schedule for implementation of this program, including completing current deployments.

12 CFR 303.46 - Financial education programs that include the provision of bank products and services.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Financial education programs that include the provision of bank products and services. 303.46 Section 303.46 Banks and Banking FEDERAL DEPOSIT INSURANCE... Branches and Offices § 303.46 Financial education programs that include the provision of bank products and...

Integration of Bilingual Emphasis Program into University Curriculum. Multiple Subjects Credential Program: Hupa, Yurok, Karuk, or Tolowa Emphasis.

Science.gov (United States)

Bennett, Ruth

A description of the American Indian Bilingual Teacher Credential Program offered by Humboldt State University (California) provides background information on the linguistic groups served by the program. Accompanying the program descriptions are lists of lower and upper division requirements, descriptions of competency exam, program schedule,…

Model description. NUDOS: A computer program for assessing the consequences of airborne releases of radionuclides

International Nuclear Information System (INIS)

Poley, A.D.

1996-02-01

NUDOS is a computer program that can be used to evaluate the consequences of airborne releases of radioactive material. The consequences which can be evaluated are individual dose and associated radiological risk, collective dose and the contamination of land. The code is capable of dealing with both continuous (routine) and accidental releases. For accidental releases both deterministic and probabilistic calculations can be performed, and the impact and effectiveness of emergency actions can be evaluated. This report contains a description of the models contained in NUDOS92 and the recommended values for the input parameters of these models. Additionally, a short overview is given of the future model improvement planned for the next NUDOS-version. (orig.)

IGUN-A program for the simulation of positive ion extraction including magnetic fields

International Nuclear Information System (INIS)

Becker, R.; Herrmannsfeldt, W.B.

1992-01-01

IGUN is a program for the simulation of positive ion extraction from plasmas. It is based on the well known program EGUN for the calculation of electron and ion trajectories in electron guns and lenses. The mathematical treatment of the plasma sheath is based on a simple analytical model, which provides a numerically stable calculation of the sheath potentials. In contrast to other ion extraction programs, IGUN is able to determine the extracted ion current in succeeding cycles of iteration by itself. However, it is also possible to set values of current, plasma density, or ion current density. Either axisymmetric or rectangular coordinates can be used, including axisymmetric or transverse magnetic fields

igun - A program for the simulation of positive ion extraction including magnetic fields

Science.gov (United States)

Becker, R.; Herrmannsfeldt, W. B.

1992-04-01

igun is a program for the simulation of positive ion extraction from plasmas. It is based on the well known program egun for the calculation of electron and ion trajectories in electron guns and lenses. The mathematical treatment of the plasma sheath is based on a simple analytical model, which provides a numerically stable calculation of the sheath potentials. In contrast to other ion extraction programs, igun is able to determine the extracted ion current in succeeding cycles of iteration by itself. However, it is also possible to set values of current, plasma density, or ion current density. Either axisymmetric or rectangular coordinates can be used, including axisymmetric or transverse magnetic fields.

Oil program implementation plan FY 1996--2000

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This document reaffirms the US Department of Energy (DOE) Office of Fossil Energy commitment to implement the National Oil Research Program in a way to maximize assurance of energy security, economic growth, environmental protection, jobs, improved economic competitiveness, and improved US balance of trade. There are two sections and an appendix in this document. Section 1 is background information that guided its formulation and a summary of the Oil Program Implementation Plan. This summary includes mission statements, major program drivers, oil issues and trends, budget issues, customers/stakeholders, technology transfer, measures of program effectiveness, and benefits. Section 2 contains more detailed program descriptions for the eight technical areas and the NIPER infrastructure. The eight technical areas are reservoir characterization; extraction research; exploration, drilling, and risk-based decision management; analysis and planning; technology transfer; field demonstration projects; oil downstream operations; and environmental research. Each description contains an overview of the program, descriptions on main areas, a discussion of stakeholders, impacts, planned budget projections, projected schedules with Gantt charts, and measures of effectiveness. The appendix is a summary of comments from industry on an earlier draft of the plan. Although changes were made in response to the comments, many of the suggestions will be used as guidance for the FY 1997--2001 plan.

Baseline descriptions for LWR spent fuel storage, handling, and transportation

Energy Technology Data Exchange (ETDEWEB)

Moyer, J.W.; Sonnier, C.S.

1978-04-01

Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables.

Baseline descriptions for LWR spent fuel storage, handling, and transportation

International Nuclear Information System (INIS)

Moyer, J.W.; Sonnier, C.S.

1978-04-01

Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables

Recommended Resources for Planning to Evaluate Program Improvement Efforts (Including the SSIP)

Science.gov (United States)

National Center for Systemic Improvement at WestEd, 2015

2015-01-01

This document provides a list of recommended existing resources for state Part C and Part B 619 staff and technical assistance (TA) providers to utilize to support evaluation planning for program improvement efforts (including the State Systemic Improvement Plan, SSIP). There are many resources available related to evaluation and evaluation…

EP1000 passive plant description

International Nuclear Information System (INIS)

Saiu, G.

1999-01-01

In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In Phase I of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) will be completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. The second part, 'Phase 2B', includes both the analyses and evaluations required to demonstrate the adequacy of the design, and to support the preparation of Safety Case Report. The second part of Phase 2 of the program will start at the beginning of 1999 and will be completed in the 2001. Incorporation of the EUR has been a key design requirement for the EP1000 from the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. This paper integrates and updates the plant description reported in the IAEA TECDOC-968. The most significant developments of the EP1000 plant design during Phase 2A of the EPP program are described and reference is made to the key design requirements set by the EUR Rev. B document. (author)

Description of an ethics curriculum for a medicine residency program.

OpenAIRE

Silverman, H J

1999-01-01

This paper examines the attempts to develop and implement an ethics curriculum for the Internal Medicine Residency Program at the University of Maryland Medical Center. The objectives of the curriculum were to enhance moral reasoning skills and to promote humanistic attitudes and behavior among the residents. The diverse methodologies used to achieve these objectives included case discussions, literature reading, role playing, writing, and videos. These activities occurred predominantly withi...

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

From Franchise to Programming: Jobs in Cable Television.

Science.gov (United States)

Stanton, Michael

1985-01-01

This article takes a look at some of the key jobs at every level of the cable industry. It discusses winning a franchise, building and running the system, and programing and production. Job descriptions include engineer, market analyst, programers, financial analysts, strand mappers, customer service representatives, access coordinator, and studio…

DOE-RL Integrated Safety Management System Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions

DOE-RL Integrated Safety Management System Description

CERN Document Server

Shoop, D S

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

Program description for the program Fuel program conversion 2011-07-01 - 2015-06-30; Programbeskrivning foer programmet Braensleprogrammet omvandling 2011-07-01 - 2015-06-30

Energy Technology Data Exchange (ETDEWEB)

2011-04-15

The Fuel program conversion is included as one of three programs in a cohesive commitment to increased, sustainable and efficient production and use of indigenous and renewable fuels that are implemented by the Swedish Energy Agency during the period July 1, 2011 - June 30, 2015. The program focuses on increasing knowledge and development of technologies for processing of the fuel feedstock, and conversion to primarily heat and electricity in plants up to about 10 MW. Issues of particular concern is to strengthen competitiveness, efficiency and sustainability in the chain from raw material to end use, and increasing raw material base by developing knowledge and technologies for new materials that are current. The program includes basic and applied research, development and demonstration. Within the sub-area Processing efforts are prioritized which streamline and reduce costs in different types of processing operations. Processing here means not just technology for pelleting and briquetting, but also sub-processes that prepare, dry, handle or process raw materials in other ways. Within the sub-area Conversion to heat and electricity in the range <10 MW, the focus is principally, on one hand increasing the knowledge of the interaction between fuel and combustion plant, and on the other hand to implement results of research in collaboration with users and equipment suppliers. Furthermore, great importance is given to increasing the competitiveness of local heating in the transition from oil to renewable heat supply and the use of new fuel materials and fuels. Questions about the fuel supply from forestry and agriculture, including issues of sustainability, environment and resource use are treated in the two parallel running programs, the Fuel program supply and the Fuel program sustainability

Postdoctoral pharmacy industry fellowships: a descriptive analysis of programs and postgraduate positions.

Science.gov (United States)

Melillo, Stephanie; Gangadharan, Amy; Johnson, Hiliary; Schleck, Patrick; Steinberg, Michael; Alexander, James G

2012-01-01

Postdoctoral pharmacy industry fellowship programs and the employment of fellowship graduates are described. A list of postgraduate industry fellowships was gathered from the 2009 ASHP Midyear Clinical Meeting. Data regarding program characteristics were collected using the Personnel Placement Service database and program-specific brochures. After data compilation, a standardized survey was sent in January 2010 via e-mail to the point of contact for all programs to confirm the accuracy of the program's characteristics. Only academically affiliated industry fellowship programs were analyzed. Retrospective data were collected regarding the first position of employment for all fellows who graduated from the program between 2005 and 2009 and the position of those same individuals at the time of survey completion. Surveys were sent to 64 postgraduate industry fellowship programs affiliated with a school of pharmacy, 56 (87.5%) of whom responded. The departmental breakdown for positions offered (n = 75) across all academically affiliated industry fellowship programs (including nonresponders) was as follows: medical affairs (38.7%, n = 29), clinical research (32.0%, n = 24), regulatory affairs (9.3%, n = 7), commercial (8.0%, n = 6), health economics and outcomes research (8.0%, n = 6), and pharmacovigilance (4.0%, n = 3). Data from fellows during years 1-5 after completion of the industry fellowship indicated that 90.5% of former fellows remained in the industry (n = 238). The postgraduate industry fellowship programs surveyed indicated that the majority of fellowship graduates continued to hold positions in industry after program completion. The majority of industry fellowships and subsequent job placements occurred in the areas of medical affairs, clinical research, and regulatory affairs.

20 CFR 627.220 - Coordination with programs under title IV of the Higher Education Act including the Pell grant...

Science.gov (United States)

2010-04-01

... the Higher Education Act including the Pell grant program. 627.220 Section 627.220 Employees' Benefits... of the Higher Education Act including the Pell grant program. (a) Coordination. Financial assistance programs under title IV of the Higher Education Act of 1965, as amended (HEA) (the Pell Grant program, the...

Designing monitoring programs for chemicals of emerging concern in potable reuse ⋯ What to include and what not to include?

KAUST Repository

Drewes, Jorg; Anderson, Paul D.; Denslow, Nancy D.; Olivieri, Adam W.; Schlenk, Daniel K.; Snyder, Shane A.; Maruya, Keith

2012-01-01

This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than '1' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound. © IWA Publishing 2013.

Designing monitoring programs for chemicals of emerging concern in potable reuse ⋯ What to include and what not to include?

KAUST Repository

Drewes, Jorg

2012-11-01

This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than \\'1\\' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound. © IWA Publishing 2013.

US Department of Energy Oak Ridge Field Office Environmental Restoration Program review

International Nuclear Information System (INIS)

1992-05-01

This document summarizes the baselined FY 1993 Department of Energy Oak Ridge Field Office (DOE-OR) Environmental Restoration Program task priorities, budgets, and associated abbreviated task descriptions. Also included is a description of the approach utilized to establish priorities for the FY 1993 and FY 1994 budget process. Abbreviated task descriptions for FY 1994 are also included in priority listing. These FY 1994 tasks form the basis for the Activity Data Sheets prepared for DOE-OR that were submitted in May 1992

Professional Preparation in Athletic Administration and Sport Management: Undergraduate and Graduate Programs in Canada.

Science.gov (United States)

Parkhouse, Bonnie L.; Stoy, Christopher J.

1979-01-01

Programs in athletic administration and sport management offered by four Canadian institutions are briefly outlined with information including availability of financial aid, degree requirements, and program description. (JMF)

Descriptive statistics.

Science.gov (United States)

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

Resource programs: Draft Environmental Impact Statement Resource Programs

International Nuclear Information System (INIS)

1992-03-01

Every two years, Bonneville Power Administration (BPA) prepares a Resource Program which identifies the resource actions BPA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Program's Environmental Impact Statement (RPEIS) is a programmatic environmental document which will support decisions made in several future Resource Programs. Environmental documents tiered to the EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. This report contains the appendices to the RPEIS

Programming the BBC micro

CERN Document Server

Ferguson, John D; Macari, Louie; Williams, Peter H

1983-01-01

Programming the BBC Micro is a 12-chapter book that begins with a description of the BBC microcomputer, its peripheral, and faults. Subsequent chapters focus on practice in programming, program development, graphics, words, numbers, sound, bits, bytes, and assembly language. The interfacing, file handling, and detailed description of BBC microcomputer are also shown.

Descriptive characteristics and health outcomes of the food by prescription nutrition supplementation program for adults living with HIV in Nyanza Province, Kenya.

Science.gov (United States)

Nagata, Jason M; Cohen, Craig R; Young, Sera L; Wamuyu, Catherine; Armes, Mary N; Otieno, Benard O; Leslie, Hannah H; Dandu, Madhavi; Stewart, Christopher C; Bukusi, Elizabeth A; Weiser, Sheri D

2014-01-01

The clinical effects and potential benefits of nutrition supplementation interventions for persons living with HIV remain largely unreported, despite awareness of the multifaceted relationship between HIV infection and nutrition. We therefore examined descriptive characteristics and nutritional outcomes of the Food by Prescription (FBP) nutrition supplementation program in Nyanza Province, Kenya. Demographic, health, and anthropometric data were gathered from a retrospective cohort of 1,017 non-pregnant adult patients who enrolled into the FBP program at a Family AIDS Care and Education Services (FACES) site in Nyanza Province between July 2009 and July 2011. Our primary outcome was FBP treatment success defined as attainment of BMI>20, and we used Cox proportional hazards to assess socio-demographic and clinical correlates of FBP treatment success. Mean body mass index was 16.4 upon enrollment into the FBP program. On average, FBP clients gained 2.01 kg in weight and 0.73 kg/m2 in BMI over follow-up (mean 100 days), with the greatest gains among the most severely undernourished (BMI 20, though 44.5% achieved a BMI increase ≥0.5. Greater BMI at baseline, younger age, male gender, and not requiring highly active antiretroviral therapy (HAART) were associated with a higher rate of attainment of BMI>20. This study reports significant gains in weight and BMI among patients enrolled in the FBP program, though only a minority of patients achieved stated programmatic goals of BMI>20. Future research should include well-designed prospective studies that examine retention, exit reasons, mortality outcomes, and long-term sustainability of nutrition supplementation programs for persons living with HIV.

Developing HYDMN code to include the transient of MNSR

International Nuclear Information System (INIS)

Al-Barhoum, M.

2000-11-01

A description of the programs added to HYDMN code (a code for thermal-hydraulic steady state of MNSR) to include the transient of the same MNSR is presented. The code asks the initial conditions for the power (in k W) and the cold initial core inlet temperature (in degrees centigrade). A time-dependent study of the coolant inlet and outlet temperature, its speed, pool and tank temperatures is done for MNSR in general and for the Syrian MNSR in particular. The study solves the differential equations taken from reference (1) by using some numerical methods found in reference (3). The code becomes this way independent of any external information source. (Author)

25 CFR 170.623 - How are IRR Program projects and activities included in a self-governance agreement?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How are IRR Program projects and activities included in a self-governance agreement? 170.623 Section 170.623 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE... self-governance agreement? To include an IRR Program project or activity in a self-governance agreement...

Radioactivity standards distribution program, 1978--1979. Interim report, 1978--1979

International Nuclear Information System (INIS)

Ziegler, L.H.

1978-06-01

A program for the distribution of calibrated radioactive samples, as one function of EPA's quality assurance program for environmental radiation measurements, is described. Included is a discussion of the objectives of the distribution program and a description of the preparation, availability, and distribution of calibrated radioactive samples. Instructions and application forms are included for laboratories desiring to participate in the program. This document is not a research report. It is designed for use by personnel of laboratories participating or desiring to participate in the Radioactivity Standards Distribution Program, which is a part of the U.S. Environmental Protection Agency's quality assurance program

Description, evaluation and clinical decision making according to various fetal heart rate patterns. Inter-observer and regional variability

DEFF Research Database (Denmark)

Lidegaard, O; Bøttcher, L M; Weber, Tom

1992-01-01

departments, especially between departments far apart. It is concluded that we still need a scientific clarification of which specific heart rate changes are the best predictors of fetal stress. Artificial intelligence programs for interpreting fetal cardiotocograms and ECG signals constitute one promising......At 10 Danish obstetrical departments, 116 residents (42 senior and 74 junior) participated in a study to assess inter-observer and regional variability in the description and evaluation of and clinical decision regarding 11 fetal heart rate patterns. The 11 traces included normal as well...... as pathological patterns, and normal as well as clinically asphyxiated babies. Five antepartum and six intrapartum patterns were included. A total of 1,276 descriptions and evaluations were obtained. The degree of agreement in description of fetal heart rate changes was high regarding the baseline...

1995 Baseline solid waste management system description

International Nuclear Information System (INIS)

Anderson, G.S.; Konynenbelt, H.S.

1995-09-01

This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

REBUILD AMERICA PROGRAM SCOPE OF WORK

Energy Technology Data Exchange (ETDEWEB)

Jeffrey Brown; Bruce Exstrum

2004-12-01

This report summarizes the activities carried out by Aspen Systems Corporation in support of the Department of Energy's Rebuild America program during the period from October 9, 1999 to October 31, 2004. These activities were in accordance with the Scope of Work contained in a GSA MOBIS schedule task order issued by the National Energy Technology Laboratory. This report includes descriptions of activities and results in the following areas: deployment/delivery model; program and project results; program representative support activities; technical assistance; web site development and operation; business/strategic partners; and training/workshop activities. The report includes conclusions and recommendations. Five source documents are also provided as appendices.

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Summary description

International Nuclear Information System (INIS)

Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.; Groh, M.R.; Gentillon, C.D.; Gilbert, B.G.; Reece, W.J.

1990-05-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automate data base management system for storing and processing human error probability and hardware component failure rate data. The NUCLARR system software resides on an IBM (or compatible) personal microcomputer. NUCLARR can be accessed by the end user to furnish data suitable for input in human and/or hardware reliability analysis to support a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. This document Volume 1, of this series is the Summary Description, which presents an overview of the data management system, including a description of data collection, data qualification, data structure, and taxonomies. Programming activities, procedures for processing data, a user's guide, and hard copy data manual are presented in Volumes 2 through 5, NUREG/CR-4639

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

Science.gov (United States)

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

Prolog as description and implementation language in computer science teaching

DEFF Research Database (Denmark)

Christiansen, Henning

population with uneven mathematical backgrounds. % Definitional interpreters, compilers, and other models of computation are defined in a systematic way as Prolog programs, and as a result, formal descriptions become running prototypes that can be tested and modified by the students. These programs can......Prolog is a powerful pedagogical instrument for theoretical elements of computer science when used as combined description language and experimentation tool. A teaching methodology based on this principle has been developed and successfully applied in a context with a heterogeneous student...

Input description for BIOPATH

International Nuclear Information System (INIS)

Marklund, J.E.; Bergstroem, U.; Edlund, O.

1980-01-01

The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

Preventing Substance Use among High School Athletes: The ATLAS and ATHENA Programs

Science.gov (United States)

Goldberg, Linn; Eliot, Diane

2005-01-01

This article will provide information about two worthwhile programs that deal with education of high school athletes about use and abuse of steroids and other areas. Based on rationale and expressed need, program descriptions will be provided including summaries of relevant program results. Guidelines for what practitioners need to consider when…

Reliability and safety program plan outline for the operational phase of a waste isolation facility

International Nuclear Information System (INIS)

Ammer, H.G.; Wood, D.E.

1977-01-01

A Reliability and Safety Program plan outline has been prepared for the operational phase of a Waste Isolation Facility. The program includes major functions of risk assessment, technical support activities, quality assurance, operational safety, configuration monitoring, reliability analysis and support and coordination meetings. Detailed activity or task descriptions are included for each function. Activities are time-phased and presented in the PERT format for scheduling and interactions. Task descriptions include manloading, travel, and computer time estimates to provide data for future costing. The program outlined here will be used to provide guidance from a reliability and safety standpoint to design, procurement, construction, and operation of repositories for nuclear waste. These repositories are to be constructed under the National Waste Terminal Storage program under the direction of the Office of Waste Isolation, Union Carbide Corp. Nuclear Division

Description of the CAREM Reactor Neutronic Calculation Codes; Descripcion de la Linea de Calculo Neutronica del CAREM

Energy Technology Data Exchange (ETDEWEB)

Villarino, Eduardo; Hergenreder, Daniel [Investigacion Aplicada, INVAP, San Carlos de Bariloche (Argentina)

2000-07-01

In this work is described the neutronic calculation line used to design the CAREM reactor.A description of the codes used and the interfaces between the different programs are presented.Both, the normal calculation line and the alternative or verification calculation line are included.The calculation line used to obtain the kinetics parameters (effective delayed-neutron fraction and prompt-neutron lifetime) is also included.

E-education in pathology including certification of e-institutions.

Science.gov (United States)

Kayser, Klaus; Ogilvie, Robert; Borkenfeld, Stephan; Kayser, Gian

2011-03-30

E-education or electronically transferred continuous education in pathology is one major application of virtual microscopy. The basic conditions and properties of acoustic and visual information transfer, of teaching and learning processes, as well as of knowledge and competence, influence its implementation to a high degree. Educational programs and structures can be judged by access to the basic conditions, by description of the teaching resources, methods, and its program, as well as by identification of competences, and development of an appropriate evaluation system. Classic teaching and learning methods present a constant, usually non-reversible information flow. They are subject to personal circumstances of both teacher and student. The methods of information presentation need to be distinguished between static and dynamic, between acoustic and visual ones. Electronic tools in education include local manually assisted tools (language assistants, computer-assisted design, etc.), local passive tools (slides, movies, sounds, music), open access tools (internet), and specific tools such as Webinars. From the medical point of view information content can be divided into constant (gross and microscopic anatomy) and variable (disease related) items. Most open access available medical courses teach constant information such as anatomy or physiology. Mandatory teaching resources are image archives with user-controlled navigation and labelling, student-oriented user manuals, discussion forums, and expert consultation. A classic undergraduate electronic educational system is WebMic which presents with histology lectures. An example designed for postgraduate teaching is the digital lung pathology system. It includes a description of diagnostic and therapeutic features of 60 rare and common lung diseases, partly in multimedia presentation. Combining multimedia features with the organization structures of a virtual pathology institution will result in a virtual pathology

Including oral health training in a health system strengthening program in Rwanda

Directory of Open Access Journals (Sweden)

Brittany Seymour

2013-03-01

Full Text Available Objective: Rwanda's Ministry of Health, with the Clinton Health Access Initiative, implemented the Human Resources for Health (HRH Program. The purpose of the program is to train and retain high-quality health care professionals to improve and sustain health in Rwanda. Design: In May 2011, an oral health team from Rwanda and the United States proposed that oral health be included in the HRH Program, due to its important links to health, in a recommendation to the Rwandan Ministry of Health. The proposal outlined a diagonal approach to curriculum design that supports the principles of global health through interconnected training for both treatment and collaborative prevention, rather than discipline-based fragmented training focused on isolated risk factors. It combined ‘vertical’ direct patient care training with ‘horizontal’ interdisciplinary training to address common underlying risk factors and associations for disease through primary care, program retention, and sustainability. Results: The proposal was accepted by the Ministry of Health and was approved for funding by the US Government and The Global Fund. Rwanda's first Bachelor of Dental Surgery program, which is in the planning phase, is being developed. Conclusions: Competencies, the training curriculum, insurance and payment schemes, licensure, and other challenges are currently being addressed. With the Ministry of Health supporting the dental HRH efforts and fully appreciating the importance of oral health, all are hopeful that these developments will ultimately lead to more robust oral health data collection, a well-trained and well-retained dental profession, and vastly improved oral health and overall health for the people of Rwanda in the decades to come.

Including oral health training in a health system strengthening program in Rwanda

Science.gov (United States)

Seymour, Brittany; Muhumuza, Ibra; Mumena, Chris; Isyagi, Moses; Barrow, Jane; Meeks, Valli

2013-01-01

Objective Rwanda's Ministry of Health, with the Clinton Health Access Initiative, implemented the Human Resources for Health (HRH) Program. The purpose of the program is to train and retain high-quality health care professionals to improve and sustain health in Rwanda. Design In May 2011, an oral health team from Rwanda and the United States proposed that oral health be included in the HRH Program, due to its important links to health, in a recommendation to the Rwandan Ministry of Health. The proposal outlined a diagonal approach to curriculum design that supports the principles of global health through interconnected training for both treatment and collaborative prevention, rather than discipline-based fragmented training focused on isolated risk factors. It combined ‘vertical’ direct patient care training with ‘horizontal’ interdisciplinary training to address common underlying risk factors and associations for disease through primary care, program retention, and sustainability. Results The proposal was accepted by the Ministry of Health and was approved for funding by the US Government and The Global Fund. Rwanda's first Bachelor of Dental Surgery program, which is in the planning phase, is being developed. Conclusions Competencies, the training curriculum, insurance and payment schemes, licensure, and other challenges are currently being addressed. With the Ministry of Health supporting the dental HRH efforts and fully appreciating the importance of oral health, all are hopeful that these developments will ultimately lead to more robust oral health data collection, a well-trained and well-retained dental profession, and vastly improved oral health and overall health for the people of Rwanda in the decades to come. PMID:23473054

A descriptive ecosystem model - a strategy for model development during site investigations

International Nuclear Information System (INIS)

Loefgren, Anders

2003-09-01

This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes

A descriptive ecosystem model - a strategy for model development during site investigations

Energy Technology Data Exchange (ETDEWEB)

Loefgren, Anders [Stockholm Univ. (Sweden). Dept. of Botany; Lindborg, Tobias [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

2003-09-01

This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes.

The KEDAK program compendium. Pt. 6

International Nuclear Information System (INIS)

Stein, E.; Panini, G.C.

1978-03-01

Translation of nuclear data from one representation into another one permit programs, which are linked to a specified data base, to use also data out of another data base. The programs BRIGITTE and COPEND, used for translating from ENDF/B to KEDAK, will be described in detail. The description includes source program listings. Translation from KEDAK to ENDF/B can be done with the program KTOE. The report contains a copy of the NEA (Nuclear Energy Agency) CPL (Computer Programme Library) abstract. The programs BRIGITTE (absctract no. NEA 438) and KTOE (abstract no. NEA 342) can be obtained from the NEA CPL. (orig.) [de

Pilot States Program report: Home energy ratings systems and energy-efficient mortgages

Energy Technology Data Exchange (ETDEWEB)

Farhar, B.

2000-04-04

This report covers the accomplishments of the home energy ratings systems/energy-efficient mortgages (HERS/EEMs) pilot states from 1993 through 1998, including such indicators as funding, ratings and EEMs achieved, active raters, and training and marketing activities. A brief description of each HERS program's evolution is included, as well as their directors' views of the programs' future prospects. Finally, an analysis is provided of successful HERS program characteristics and factors that appear to contribute to HERS program success.

Characterization of Rocks and Grouts to Support DNA's Verification Program

National Research Council Canada - National Science Library

Martin, J

2000-01-01

.... Specifically, test data was generated for use with DNA's HYDROPLUS program. The tests performed included unconfined compression tests, uniaxial strain tests, physical properties, ultrasonic velocities, XRD mineralogy, and lithologic descriptions...

Quality assurance program description. Topical report SDQAPD-1

International Nuclear Information System (INIS)

1975-01-01

The topical report presented describes the SDG and E QA Program that is applied to the design, procurement, construction, and preoperational testing of nuclear power plants. The QA plan describes the SDG and E organizational structure for quality assurance; identifies the functions, duties, and responsibilities of key departments and individuals; describes interrelationships and interfaces among internal groups and external organizations; delineates program requirements, and prescribes methods of implementation. SDG and E Procedures and Directives provide detailed direction for accomplishment of program requirements in consonance with the methods specified in the QA Plan

Construction of the descriptive system for the Assessment of Quality of Life AQoL-6D utility instrument.

Science.gov (United States)

Richardson, Jeffrey R J; Peacock, Stuart J; Hawthorne, Graeme; Iezzi, Angelo; Elsworth, Gerald; Day, Neil A

2012-04-17

Multi attribute utility (MAU) instruments are used to include the health related quality of life (HRQoL) in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL)-6D, MAU instrument. The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM) to meet these dual requirements. The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

Science.gov (United States)

Colantonio, A

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subjects, setting, type of intervention, format), (b) evaluation design (research design, variables measured, operational methods), and (c) program outcomes. Results indicate numerous methodological and conceptual weaknesses and issues. These weaknesses included lack of controlled research designs and short time lags between pre- and post-test measures. Other problems identified are missing information regarding subjects, type of intervention, how variables are measured (operational methods), and reliability and validity of evaluation instruments. Due to the aforementioned weaknesses, positive outcomes could not be supported. Recommendations are made for future EAP evaluations.

E4CHEM. A simulation program for the fate of chemicals in the environment. Handbook. User`s guide and description. Version 3.6. December 1995

Energy Technology Data Exchange (ETDEWEB)

Brueggemann, R [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien; Drescher-Kaden, U [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien; Muenzer, B [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Projektgruppe Umweltgefaehrdungspotentiale von Chemikalien

1996-02-01

The predominant aims of E4CHEM are: Deterministic description of the chemical`s behavior in the environment with varying ecoparameters including the special aspects; Behavior of the same chemical in different compartments; Behavior of different chemicals in the same compartment with the same ecoparameters; Tracing back of chemicals detected in the environment to the possible source by means of check procedures like in EXWAT, one of the E4CHEM models; Discharge of the user from extensive calculation operations; Interpretation of experimental results. In combination with statistics and algebraic tools (lattice theory) but not included in E4CHEM yet: Selection of descriptors as tool for priority setting; Identification and ranking of chemicals according to their risk to the environment by comparing descriptors within descriptor matrices about the behavior of chemicals deived from the different models. Furthermore: Identification of chemical applicable as reference substances with respect to environmental behavior. The program E4CHEM is described in this manual. (orig./SR)

User's guide to HEATRAN: a computer program for three-dimensional transient fluid-flow and heat-transfer analysis

International Nuclear Information System (INIS)

Wong, C.N.C.; Cheng, S.K.; Todreas, N.E.

1982-01-01

This report provides the HEATRAN user with programming and input information. HEATRAN is a computer program which is written to analyze the transient three dimensional single phase incompressible fluid flow and heat transfer problem. In this report, the programming information is given first. This information includes details concerning the code and structure. The description of the required input variables is presented next. Following the input description, the sample problems are described and HEATRAN's results are presented

BWR Refill-Reflood Program. Final report

International Nuclear Information System (INIS)

Myers, L.L.

1983-09-01

The BWR Refill-Reflood Program is part of the continuing Loss of Coolant Accident (LOCA) research in the United States which is jointly sponsored by the Nuclear Regulatory Commission, the Electric Power Research Institute, and the General Electric Company. The current program expanded the focus of this research to include full scale experimental evaluations of multidimensional and multichannel effects during system refill. The program has also made major contributions to the BWR version of the Transient Reactor Analysis Code (TRAC) which has been developed cooperatively with the Idaho National Engineering Laboratory (INEL) for application to BWR transients. A summary description of the complete program is provided including the principal findings and main conclusions of the program. The results of the program have shown that multidimensional and parallel channel effects have the potential to significantly improve the system response over that observed in single channel tests

Energy research program 82

International Nuclear Information System (INIS)

1982-01-01

The energy research program 82 (EFP-82) is prepared by the Danish ministry of energy in order to continue the extension of the Danish energy research and development started through the former trade ministry's programs EM-1 (1976) and EM-2 (1978), and the energy ministry's programs EFP-80 and EFP-81. The new program is a continuation of the activities in the period 1982-84 with a total budget of 100 mio.Dkr. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (BP)

Summary description of the Fast Flux Test Facility

International Nuclear Information System (INIS)

Cabell, C.P.

1980-12-01

This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like

The SBIRT program matrix: a conceptual framework for program implementation and evaluation.

Science.gov (United States)

Del Boca, Frances K; McRee, Bonnie; Vendetti, Janice; Damon, Donna

2017-02-01

Screening, Brief Intervention and Referral to Treatment (SBIRT) is a comprehensive, integrated, public health approach to the delivery of services to those at risk for the adverse consequences of alcohol and other drug use, and for those with probable substance use disorders. Research on successful SBIRT implementation has lagged behind studies of efficacy and effectiveness. This paper (1) outlines a conceptual framework, the SBIRT Program Matrix, to guide implementation research and program evaluation and (2) specifies potential implementation outcomes. Overview and narrative description of the SBIRT Program Matrix. The SBIRT Program Matrix has five components, each of which includes multiple elements: SBIRT services; performance sites; provider attributes; patient/client populations; and management structure and activities. Implementation outcomes include program adoption, acceptability, appropriateness, feasibility, fidelity, costs, penetration, sustainability, service provision and grant compliance. The Screening, Brief Intervention and Referral to Treatment Program Matrix provides a template for identifying, classifying and organizing the naturally occurring commonalities and variations within and across SBIRT programs, and for investigating which variables are associated with implementation success and, ultimately, with treatment outcomes and other impacts. © 2017 Society for the Study of Addiction.

DOE Defense Program (DP) safety programs. Final report, Task 003

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 003 of Subcontract 9-X52-W7423-1 was to provide LANL with support to the DOE Defense Program (DP) Safety Programs. The effort included the identification of appropriate safety requirements, the refinement of a DP-specific Safety Analysis Report (SAR) Format and Content Guide (FCG) and Comprehensive Review Plan (CRP), incorporation of graded approach instructions into the guidance, and the development of a safety analysis methodologies document. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective is provided here

Description of the RZV and RZF programs

International Nuclear Information System (INIS)

Raevskaya, V.E.; Torlin, B.Z.

1980-01-01

An instruction for running the P3B and P3F programs intended for an implementation of a one-group calculation of the neutron field in a polycell with multizone ring blocks in the P 3 approximation. The program is written in the FORTRAN language for the BESM-6 computer. Time for the calculation of one variant constitutes about 20 s for a simple cell and for double lattices for uniform blocks and 40 s - for double lattices from 30-zone blocks. 4 minutes is the maximum time required for the calculation of the 8x8 polycell consisting from 20 nonequivalent 30-zone blocks of 20 kinds

Expanding Free School-based Human Papilloma Virus (HPV Vaccination Programs to Include School-aged Males in Nova Scotia, Canada

Directory of Open Access Journals (Sweden)

Hannah Krater-Melamed

2017-06-01

Full Text Available Bill 70 (HPV Vaccine Act was presented to the Nova Scotia House of Assembly with the aim of expanding the current Nova Scotia school-based HPV vaccination program to include males. In recent years, increased awareness of HPV and HPV-caused cancers has led to the implementation of school-based female HPV vaccination programs across Canada. Changing guidelines, based on recent evidence, suggest that males should also be included in these programs. Program expansion to include males aims to reduce the prevalence of HPV-causing cancers and their ensuing costs, to promote equal access to healthcare services, and to make Nova Scotia a leader in HPV prevention. Support from the Canadian public and high profile political actors along with pressure from other provinces and interest groups, including the Society of Obstetricians and Gynaecologists of Canada, influenced the passing of the HPV Vaccine Act. In order to implement this reform, the provincial financial commitment to the previous HPV program was expanded to cover the cost of male vaccination.

A Computer Program for Simplifying Incompletely Specified Sequential Machines Using the Paull and Unger Technique

Science.gov (United States)

Ebersole, M. M.; Lecoq, P. E.

1968-01-01

This report presents a description of a computer program mechanized to perform the Paull and Unger process of simplifying incompletely specified sequential machines. An understanding of the process, as given in Ref. 3, is a prerequisite to the use of the techniques presented in this report. This process has specific application in the design of asynchronous digital machines and was used in the design of operational support equipment for the Mariner 1966 central computer and sequencer. A typical sequential machine design problem is presented to show where the Paull and Unger process has application. A description of the Paull and Unger process together with a description of the computer algorithms used to develop the program mechanization are presented. Several examples are used to clarify the Paull and Unger process and the computer algorithms. Program flow diagrams, program listings, and a program user operating procedures are included as appendixes.

Second Line of Defense Spares Program

Energy Technology Data Exchange (ETDEWEB)

Henderson, Dale L.; Holmes, Aimee E.; Muller, George; Mercier, Theresa M.; Brigantic, Robert T.; Perkins, Casey J.; Cooley, Scott K.; Thorsen, Darlene E.

2012-11-20

During Fiscal Year 2012, a team from the Pacific Northwest National Laboratory (PNNL) conducted an assessment and analysis of the Second Line of Defense (SLD) Sustainability spare parts program. Spare parts management touches many aspects of the SLD Sustainability Program including contracting and integration of Local Maintenance Providers (LMP), equipment vendors, analyses and metrics on program performance, system state of health, and maintenance practices. Standardized spares management will provide better data for decisions during site transition phase and will facilitate transition to host country sustainability ownership. The effort was coordinated with related SLD Sustainability Program initiatives, including a configuration items baselining initiative, a metrics initiative, and a maintenance initiative. The spares study has also led to pilot programs for sourcing alternatives that include regional intermediate inventories and partnering agreements that leverage existing supply chains. Many partners from the SLD Sustainability program contributed to and were consulted in the course of the study. This document provides a description of the findings, recommendations, and implemented solutions that have resulted from the study.

CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User's manual to Version 1b (including program reference)

International Nuclear Information System (INIS)

Chen, T.F.; Gerhard, M.A.; Trummer, D.J.; Johnson, G.L.; Mok, G.C.

1995-02-01

CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user's manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

Library of problem-oriented programs for solving problems of atomic and nuclear physics

International Nuclear Information System (INIS)

Kharitonov, Yu.I.

1976-01-01

The Data Centre of the Leningrad Institute of Nuclear Physics (LIYaF) is working on the establishment of a library of problem-oriented computer programs for solving problems of atomic and nuclear physics. This paper lists and describes briefly the programs presently available to the Data Centre. The descriptions include the program code numbers, the program language, the translator for which the program is designed, and the program scope

Program of telluric lines monitoring

Directory of Open Access Journals (Sweden)

Vince I.

2006-01-01

Full Text Available A new observational program of telluric lines monitoring was introduced at Belgrade Astronomical Observatory. The ultimate goal of this program is to investigate the properties of Earth’s atmosphere through modeling the observed profiles of telluric lines. The program is intend to observe infrared molecular oxygen lines that were selected according to spectral sensitivity of the available CCD camera. In this paper we give the initial and the final selection criteria for spectral lines included in the program the description of equipment and procedures used for observations and reduction, a review of preliminary observational results with the estimated precision, and a short discussion on the comparison of the theoretical predictions and the measurements.

Employed women with alcohol problems who seek help from employee assistance programs. Description and comparisons.

Science.gov (United States)

Blum, T C; Roman, P M; Harwood, E M

1995-01-01

After a brief description of employee assistance programs (EAP), we present data collected from 6,400 employees from 84 worksites who used the services of EAPs, a portion of whom were assessed by the EAP as having alcohol-related problems and/or received scores on the Alcohol Dependence Scale (ADS) indicative of a potential alcohol-related problem. In addition, data were collected at intake from the EAP administrators, and employment status of the employee clients was assessed 18 to 24 months later. These data indicate that EAPs are effective in sustaining the employment of most women with alcohol-related problems who seek services from EAPs and that EAPs' goal of early intervention is especially realized among women with alcohol problems. Other conclusions include: women with alcohol problems do not enter EAPs through routes that are strikingly different from those of men; many of the gender differences that are revealed are associated with job status differences; employed women with alcohol problems are detached from nuclear families, with markedly low rates of current marriage; even when married, spouses are less likely to play a role in the referral of women with alcohol problems than the spouses of the men; and, there is no clear indication that women are the target of any form of discrimination in the process of EAP utilization. However, women are considerably more likely to have less adequate insurance coverage, according to the EAP administrators' assessment reported at client intake, than their male counterparts, leading to treatment choices that may be less than appropriate.

Report on architecture description for the INFLO prototype.

Science.gov (United States)

2014-01-01

This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization : (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The : intent is...

YUCCA MOUNTAIN SITE DESCRIPTION

International Nuclear Information System (INIS)

Simmons, A.M.

2004-01-01

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

Energy research program 84

International Nuclear Information System (INIS)

1984-01-01

The energy research program 84 (EFP-84) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82 and EFP-83. The new program is a continuation of the activities in the period 1984-86 with a total budget of 112 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Energy research program 83

International Nuclear Information System (INIS)

1983-01-01

The energy research program 83 (EFP-83) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81 and EFP-82. The new program is a continuation of the activities in the period 1983-85 with a total budget of 111 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Energy research program 85

International Nuclear Information System (INIS)

1985-01-01

The energy research program 85 (EFP-85) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, and EFP-84. The new program is a continuation of the activities in the period 1985-87 with a total budget of 110 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Description of a materials/coolant laboratory for support of the Breeder Reactor Technology Shipping Program

International Nuclear Information System (INIS)

Rack, H.J.; Rohde, R.W.

1979-04-01

A description of a facility devoted to evaluating the environmental compatibility and mechanical response of materials suitable for a breeder reactor spent-fuel shipping cask is given. The facility presently consists of a closed-loop servo-controlled hydraulic, horizontal test system coupled to an environmental chamber, generalized mechanical test equipment and high-rate mechanical behavior apparatus. Future plans include the procurement of real-time computer control equipment which will be used to assess the effects of complex load-time histories on spent-fuel shipping cask materials

RECON: a computer program for analyzing repository economics. Documentation and user's manual

International Nuclear Information System (INIS)

Clark, L.L.; Cole, B.M.; McNair, G.W.; Schutz, M.E.

1983-05-01

From 1981 through 1983 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evalute the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through March of 1983. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input either using card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained

Energy research program 80

International Nuclear Information System (INIS)

1980-01-01

The energy research program 80 contains an extension of the activities for the period 1980-82 within a budget of 100 mio.kr., that are a part of the goverment's employment plan for 1980. The research program is based on a number of project proposals, that have been collected, analysed, and supplemented in October-November 1979. This report consists of two parts. Part 1: a survey of the program, with a brief description of the background, principles, organization and financing. Part 2: Detailed description of the different research programs. (LN)

Advanced maintenance research programs

International Nuclear Information System (INIS)

Marston, T.U.; Gelhaus, F.; Burke, R.

1985-01-01

The purpose of this paper is to provide the reader with an idea of the advanced maintenance research program at the Electric Power Research Institute (EPRI). A brief description of the maintenance-related activities is provided as a foundation for the advanced maintenance research projects. The projects can be divided into maintenance planning, preventive maintenance program development and implementation, predictive (or conditional) maintenance, and innovative maintenance techniques. The projects include hardware and software development, human factors considerations, and technology promotion and implementation. The advanced concepts include: the incorporation of artificial intelligence into outage planning; turbine and pump maintenance; rotating equipment monitoring and diagnostics with the aid of expert systems; and the development of mobile robots for nuclear power plant maintenance

Isochronous cyclotron closed equilibrium orbit calculation program description

International Nuclear Information System (INIS)

Kiyan, I.N.; Vorozhtsov, S.B.; Tarashkevich, R.

2003-01-01

The Equilibrium Orbit Research Program - EORP, written in C++ with the use of Visual C++ is described. The program is intended for the calculation of the particle rotation frequency and particle kinetic energy in the closed equilibrium orbits of an isochronous cyclotron, where the closed equilibrium orbits are described through the radius and particle momentum angle: r eo (θ) and φ p (θ). The program algorithm was developed on the basis of articles, lecture notes and original analytic calculations. The results of calculations by the EORP were checked and confirmed by using the results of calculations by the numerical methods. The discrepancies between the EORP results and the numerical method results for the calculations of the particle rotation frequency and particle kinetic energy are within the limits of ±1·10 -4 . The EORP results and the numerical method results for the calculations of r eo (θ) and φ p (θ) practically coincide. All this proves the accuracy of calculations by the EORP for the isochronous cyclotrons with the azimuthally varied fields. As is evident from the results of calculations, the program can be used for the calculations of both straight - sector and spiral-sector isochronous cyclotrons. (author)

Construction of the descriptive system for the assessment of quality of life AQoL-6D utility instrument

Directory of Open Access Journals (Sweden)

Richardson Jeffrey RJ

2012-04-01

Full Text Available Abstract Background Multi attribute utility (MAU instruments are used to include the health related quality of life (HRQoL in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL-6D, MAU instrument. Methods The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM to meet these dual requirements. Results and Discussion The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. Conclusions The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

Description of the Formerly Utilized Sites Remedial Action Program

International Nuclear Information System (INIS)

1980-09-01

The background and the results to date of the Department of Energy program to identify and evaluate the radiological conditions at sites formerly utilized by the Corps of Engineers' Manhattan Engineer District (MED) and the US Atomic Energy Commission (AEC) are summarized. The sites of concern were federally, privately, and institutionally owned and were used primarily for research, processing, and storage of uranium and thorium ores, concentrates, or residues. Some sites were subsequently released for other purposes without radiological restriction. Surveys have been conducted since 1974 to document radiological conditions at such sites. Based on radiological surveys, sites are identified in this document that require, or are projected to require, remedial action to remove potential restrictions on the use of the property due to the presence of residual low-level radioactive contamination. Specific recommendations for each site will result from more detailed environmental and engineering surveys to be conducted at those sites and, if necessary, an environmental impact assessment or environmental impact statement will be prepared. Section 3.0 describes the current standards and guidelines now being used to conduct remedial actions. Current authority of the US Department of Energy (DOE) to proceed with remedial actions and the new authority required are summarized. A plan to implement the Formerly Utilized Sites Remedial Action Program (FUSRAP) in accordance with the new authority is presented, including the objectives, scope, general approach, and a summary schedule. Key issues affecting schedule and cost are discussed

Description of the Formerly Utilized Sites Remedial Action Program

Energy Technology Data Exchange (ETDEWEB)

1980-09-01

The background and the results to date of the Department of Energy program to identify and evaluate the radiological conditions at sites formerly utilized by the Corps of Engineers' Manhattan Engineer District (MED) and the US Atomic Energy Commission (AEC) are summarized. The sites of concern were federally, privately, and institutionally owned and were used primarily for research, processing, and storage of uranium and thorium ores, concentrates, or residues. Some sites were subsequently released for other purposes without radiological restriction. Surveys have been conducted since 1974 to document radiological conditions at such sites. Based on radiological surveys, sites are identified in this document that require, or are projected to require, remedial action to remove potential restrictions on the use of the property due to the presence of residual low-level radioactive contamination. Specific recommendations for each site will result from more detailed environmental and engineering surveys to be conducted at those sites and, if necessary, an environmental impact assessment or environmental impact statement will be prepared. Section 3.0 describes the current standards and guidelines now being used to conduct remedial actions. Current authority of the US Department of Energy (DOE) to proceed with remedial actions and the new authority required are summarized. A plan to implement the Formerly Utilized Sites Remedial Action Program (FUSRAP) in accordance with the new authority is presented, including the objectives, scope, general approach, and a summary schedule. Key issues affecting schedule and cost are discussed.

The Role of Values, Moral Norms, and Descriptive Norms in Building Occupant Responses to an Energy-Efficiency Pilot Program and to Framing of Related Messages

Science.gov (United States)

Arpan, Laura M.; Barooah, Prabir; Subramany, Rahul

2015-01-01

This study examined building occupants' responses associated with an occupant-based energy-efficiency pilot in a university building. The influence of occupants' values and norms as well as effects of two educational message frames (descriptive vs. moral norms cues) on program support were tested. Occupants' personal moral norm to conserve energy…

ENDF utility codes release 6.10. Description and operating instructions

International Nuclear Information System (INIS)

Dunford, C.L.

1995-01-01

Description and operating instructions are given for a package of utility codes operating on evaluated nuclear data files in the formats ENDF-6 (and ENDF-5). Included are the data checking codes CHECKER, FIZCON, PSYCHE; the code INTER for retrieving thermal cross-sections and some other data; graphical plotting subroutines PLOTEF, GRALIB, INTLIB; and the file maintenance and retrieval codes LISTEF, SETMDC, GETMAT, STANEF. This program package which is designed for CDC, IBM, DEC and PC computers, can be obtained on magnetic tape or floppy diskette, free of charge, from the IAEA Nuclear Data Section. (author)

IFF, Full-Screen Input Menu Generator for FORTRAN Program

International Nuclear Information System (INIS)

Seidl, Albert

1991-01-01

1 - Description of program or function: The IFF-package contains input modules for use within FORTRAN programs. This package enables the programmer to easily include interactive menu-directed data input (module VTMEN1) and command-word processing (module INPCOM) into a FORTRAN program. 2 - Method of solution: No mathematical operations are performed. 3 - Restrictions on the complexity of the problem: Certain restrictions of use may arise from the dimensioning of arrays. Field lengths are defined via PARAMETER-statements

Ontology learning from interpretations in lightweight description logics

CSIR Research Space (South Africa)

Klarman, S

2015-08-01

Full Text Available International Conference on Inductive Logic programming (ILP), Kyoto, Japan, 20-22 August 2015 Ontology Learning from Interpretations in Lightweight Description Logics Szymon Klarman1 and Katarina Britz2 1 Department of Computer Science, Brunel...

UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

International Nuclear Information System (INIS)

1995-06-01

Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

A report to Congress Nuclear Regulatory Research: Project descriptions for FY88

International Nuclear Information System (INIS)

1988-08-01

This report has been written in response to a request of the United States Congress that the Nuclear Regulatory Commission prepare and submit to the Congress a summary description of its research projects. Commercial contracts and research efforts at the Department of Energy (DOE) laboratories are assigned a five-digit financial number (FIN). This report provides a project descriptions for each FIN number. The project descriptions are divided into five major sections called program areas. These areas are: integrity of reactor components, prevent damage to reactor cores, reactor containment safety, confirming safety of nuclear waste disposal, and resolving safety issues and developing regulations. An explanation of each program area is given in an overview at the beginning of each section

Experimental program plan for the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

The US Department of Energy has prepared this Experimental Program Plan for the Waste Isolation Pilot Plant (EPP) to provide a summary of the DOE experimental efforts needed for the performance assessment process for the WIPP, and of the linkages of this process to the appropriate regulations. The Plan encompasses a program of analyses of the performance of the planned repository based on scientific studies, including tests with transuranic waste at laboratory sites, directed at evaluating compliance with the principal regulations governing the WIPP. The Plan begins with background information on the WIPP project, the requirements of the LWA (Land Withdrawal Act), and its objective and scope. It then presents an overview of the regulatory requirements and the compliance approach. Next are comprehensive discussions of plans for compliance with disposal regulations, followed by the SWDA (Solid Waste Disposal Act) and descriptions of activity programs designed to provide information needed for determining compliance. Descriptions and justifications of all currently planned studies designed to support regulatory compliance activities are also included.

Experimental program plan for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

1994-01-01

The US Department of Energy has prepared this Experimental Program Plan for the Waste Isolation Pilot Plant (EPP) to provide a summary of the DOE experimental efforts needed for the performance assessment process for the WIPP, and of the linkages of this process to the appropriate regulations. The Plan encompasses a program of analyses of the performance of the planned repository based on scientific studies, including tests with transuranic waste at laboratory sites, directed at evaluating compliance with the principal regulations governing the WIPP. The Plan begins with background information on the WIPP project, the requirements of the LWA (Land Withdrawal Act), and its objective and scope. It then presents an overview of the regulatory requirements and the compliance approach. Next are comprehensive discussions of plans for compliance with disposal regulations, followed by the SWDA (Solid Waste Disposal Act) and descriptions of activity programs designed to provide information needed for determining compliance. Descriptions and justifications of all currently planned studies designed to support regulatory compliance activities are also included

Energy research program 86

International Nuclear Information System (INIS)

1986-01-01

The energy research program 86 (EFP-86) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, EFP-84, and EFP-85. The new program is a continuation of the activities in the period 1986-88 with a total budget of 116 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Fission energy program of the U. S. Department of Energy

Energy Technology Data Exchange (ETDEWEB)

1978-06-01

The document describes programs managed by the Program Director for Nuclear Energy, Department of Energy, and under the cognizance of the Committee on Science and Technology, United States House of Representatives. The major portion of the document is concerned with civilian nuclear power development, the policy for which has been established by the National Energy Plan of April 1977, but it also includes descriptions of the space applications and naval reactor programs.

Fission energy program of the U.S. Department of Energy

International Nuclear Information System (INIS)

1978-06-01

The document describes programs managed by the Program Director for Nuclear Energy, Department of Energy, and under the cognizance of the Committee on Science and Technology, United States House of Representatives. The major portion of the document is concerned with civilian nuclear power development, the policy for which has been established by the National Energy Plan of April 1977, but it also includes descriptions of the space applications and naval reactor programs

The MuCool Test Area and RF Program

International Nuclear Information System (INIS)

Torun, Y.; Huang, D.; Norem, J.; Palmer, Robert B.; Stratakis, Diktys; Bross, A.; Chung, M.; Jansson, A.; Moretti, A.; Yonehara, K.; Li, D.

2010-01-01

The MuCool RF Program focuses on the study of normal conducting RF structures operating in high magnetic field for applications in muon ionization cooling for Neutrino Factories and Muon Colliders. Here we give an overview of the program, which includes a description of the test facility and its capabilities, the current test program, and the status of a cavity that can be rotated in the magnetic field, which allows for a detailed study of the maximum stable operating gradient vs. magnetic field strength and angle.

A users guide to the POPDOS program for evaluating collective doses

International Nuclear Information System (INIS)

Henning, M.J.

1975-09-01

A complete description is given of the input data needed to use the computer program POPDOS for estimating doses in England and Wales following atmospheric releases of radioactivity. Details are given of the Job Control Language used for normal execution of the program. A complete test case is included to facilitate program transfer to other computers. POPDOS is written in Fortran IV (level H) and is compiled under OPT = 2, using ASP3 on the IBM 370/168 computer. A list of subroutines and their functions is given together with a tabulation of the major dimensioned variables. Finally there is a description of the procedure by which a collective dose surface can be generated using the CALCOMP plotting facilities. (author)

29 CFR 1472.215 - What must I include in my drug-free awareness program?

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false What must I include in my drug-free awareness program? 1472.215 Section 1472.215 Labor Regulations Relating to Labor (Continued) FEDERAL MEDIATION AND CONCILIATION SERVICE GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Requirements for Recipients Other Than Individuals § 1472.215...

Unified description of structure and reactions: implementing the nuclear field theory program

International Nuclear Information System (INIS)

Broglia, R A; Bortignon, P F; Barranco, F; Vigezzi, E; Idini, A; Potel, G

2016-01-01

The modern theory of the atomic nucleus results from the merging of the liquid drop model of Niels Bohr and Fritz Kalckar, and of the shell model of Marie Goeppert Meyer and Hans Jensen. The first model contributed the concepts of collective excitations. The second, those of independent-particle motion. The unification of these apparently contradictory views in terms of the particle-vibration and particle-rotation couplings carried out by Aage Bohr and Ben Mottelson has allowed for an ever more complete, accurate and detailed description of nuclear structure. Nuclear field theory (NFT), developed by the Copenhagen–Buenos Aires collaboration, provided a powerful quantal embodiment of this unification. Reactions are not only at the basis of quantum mechanics (statistical interpretation, Max Born), but also the specific tools to probe the atomic nucleus. It is then natural that NFT is being extended to deal with processes which involve the continuum in an intrinsic fashion, so as to be able to treat them on an equal footing with those associated with bound states (structure). As a result, spectroscopic studies of transfer to continuum states could eventually make use of the NFT rules, properly extended to take care of recoil effects. In the present contribution we review the implementation of the NFT program of structure and reactions, setting special emphasis on open problems and outstanding predictions. (invited comment)

A review of pediatric dentistry program websites: what are applicants learning about our programs?

Science.gov (United States)

Lin, Jenn-Yih; Lee, Jung; Davidson, Bo; Farquharson, Kara; Shaul, Cheryl; Kim, Sara

2010-06-01

The purpose of this study was twofold: 1) to examine website content provided by U.S. and Canadian pediatric dentistry residency programs, and 2) to understand aspects of program websites that dental students report to be related to their interests. Sixty-eight program websites were reviewed by five interprofessional evaluators. A thirty-six-item evaluation form was organized into 1) program descriptive items listed on the American Academy of Pediatric Dentistry (AAPD) website (n=21); 2) additional program descriptive items not listed on the AAPD website but of interest (n=9); and 3) items related to website interface design (n=5). We also surveyed fifty-four dental students regarding their interest in various aspects of program descriptions. The results of this study suggest that pediatric dentistry residency programs in general tend to provide identical or less information than what is listed on the AAPD website. The majority of respondents (76 percent) reported that residency program websites would be their first source of information about advanced programs. The greatest gap between the available website information and students' interests exists in these areas: stipend and tuition information, state licensure, and program strengths. Pediatric dentistry residency programs underutilize websites as a marketing and recruitment tool and should incorporate more information in areas of students' priority interests.

Fuzzy Multi-objective Linear Programming Approach

Directory of Open Access Journals (Sweden)

Amna Rehmat

2007-07-01

Full Text Available Traveling salesman problem (TSP is one of the challenging real-life problems, attracting researchers of many fields including Artificial Intelligence, Operations Research, and Algorithm Design and Analysis. The problem has been well studied till now under different headings and has been solved with different approaches including genetic algorithms and linear programming. Conventional linear programming is designed to deal with crisp parameters, but information about real life systems is often available in the form of vague descriptions. Fuzzy methods are designed to handle vague terms, and are most suited to finding optimal solutions to problems with vague parameters. Fuzzy multi-objective linear programming, an amalgamation of fuzzy logic and multi-objective linear programming, deals with flexible aspiration levels or goals and fuzzy constraints with acceptable deviations. In this paper, a methodology, for solving a TSP with imprecise parameters, is deployed using fuzzy multi-objective linear programming. An example of TSP with multiple objectives and vague parameters is discussed.

Token Economy: A Systematic Review of Procedural Descriptions.

Science.gov (United States)

Ivy, Jonathan W; Meindl, James N; Overley, Eric; Robson, Kristen M

2017-09-01

The token economy is a well-established and widely used behavioral intervention. A token economy is comprised of six procedural components: the target response(s), a token that functions as a conditioned reinforcer, backup reinforcers, and three interconnected schedules of reinforcement. Despite decades of applied research, the extent to which the procedures of a token economy are described in complete and replicable detail has not been evaluated. Given the inherent complexity of a token economy, an analysis of the procedural descriptions may benefit future token economy research and practice. Articles published between 2000 and 2015 that included implementation of a token economy within an applied setting were identified and reviewed with a focus on evaluating the thoroughness of procedural descriptions. The results show that token economy components are regularly omitted or described in vague terms. Of the articles included in this analysis, only 19% (18 of 96 articles reviewed) included replicable and complete descriptions of all primary components. Missing or vague component descriptions could negatively affect future research or applied practice. Recommendations are provided to improve component descriptions.

FORTRAN programs for transient eddy current calculations using a perturbation-polynomial expansion technique

International Nuclear Information System (INIS)

Carpenter, K.H.

1976-11-01

A description is given of FORTRAN programs for transient eddy current calculations in thin, non-magnetic conductors using a perturbation-polynomial expansion technique. Basic equations are presented as well as flow charts for the programs implementing them. The implementation is in two steps--a batch program to produce an intermediate data file and interactive programs to produce graphical output. FORTRAN source listings are included for all program elements, and sample inputs and outputs are given for the major programs

Computer program user's manual for FIREFINDER digital topographic data verification library dubbing system

Science.gov (United States)

Ceres, M.; Heselton, L. R., III

1981-11-01

This manual describes the computer programs for the FIREFINDER Digital Topographic Data Verification-Library-Dubbing System (FFDTDVLDS), and will assist in the maintenance of these programs. The manual contains detailed flow diagrams and associated descriptions for each computer program routine and subroutine. Complete computer program listings are also included. This information should be used when changes are made in the computer programs. The operating system has been designed to minimize operator intervention.

Student science enrichment training program: Progress report, June 1, 1988--May 31, 1989

Energy Technology Data Exchange (ETDEWEB)

Sandhu, S.S.

1989-04-21

This is a status report on a Student Science Enrichment Training Program held at the campus of Claflin College, Orangeburg, SC. The topics of the report include the objectives of the project, participation experienced, financial incentives and support for the program, curriculum description, and estimated success of the program in stimulating an occupational interest in science and research fields by the students.

AHTR Refueling Systems and Process Description

Energy Technology Data Exchange (ETDEWEB)

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

AHTR Refueling Systems and Process Description

Energy Technology Data Exchange (ETDEWEB)

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

Isochronous Cyclotron Closed Equilibrium Orbit Calculation Program Description

CERN Document Server

Kian, I N; Tarashkevich, R

2003-01-01

The Equilibrium Orbit Research Program - EORP, written in C++ with the use of Visual C++ is described. The program is intended for the calculation of the particle rotation frequency and particle kinetic energy in the closed equilibrium orbits of an isochronous cyclotron, where the closed equilibrium orbits are described through the radius and particle momentum angle: r_{eo}(\\theta) and \\varphi_{p}(\\theta). The program algorithm was developed on the basis of articles, lecture notes and original analytic calculations. The results of calculations by the EORP were checked and confirmed by using the results of calculations by the numerical methods. The discrepancies between the EORP results and the numerical method results for the calculations of the particle rotation frequency and particle kinetic energy are within the limits of \\pm1\\cdot10^{-4}. The EORP results and the numerical method results for the calculations of r_{eo}(\\theta) and \\varphi_{p}(\\theta) practically coincide. All this proves the accuracy of ca...

Office of radiation and indoor air: Program description

International Nuclear Information System (INIS)

1993-06-01

The goal of the Environmental Protection Agency's (EPA) Office of Radiation and Indoor Air is to protect the public and the environment from exposures to radiation and indoor air pollutants. The Office develops protection criteria, standards, and policies and works with other programs within EPA and other agencies to control radiation and indoor air pollution exposures; provides technical assistance to states through EPA's regional offices and other agencies having radiation and indoor air protection programs; directs an environmental radiation monitoring program; responds to radiological emergencies; and evaluates and assesses the overall risk and impact of radiation and indoor air pollution. The Office is EPA's lead office for intra- and interagency activities coordinated through the Committee for Indoor Air Quality. It coordinates with and assists the Office of Enforcement in enforcement activities where EPA has jurisdiction. The Office disseminates information and works with state and local governments, industry and professional groups, and citizens to promote actions to reduce exposures to harmful levels of radiation and indoor air pollutants

Simulated selection responses for breeding programs including resistance and resilience to parasites in Creole goats.

Science.gov (United States)

Gunia, M; Phocas, F; Gourdine, J-L; Bijma, P; Mandonnet, N

2013-02-01

The Creole goat is a local breed used for meat production in Guadeloupe (French West Indies). As in other tropical countries, improvement of parasite resistance is needed. In this study, we compared predicted selection responses for alternative breeding programs with or without parasite resistance and resilience traits. The overall breeding goal included traits for production, reproduction, and parasite resilience and resistance to ensure a balanced selection outcome. The production traits were BW and dressing percentage (DP). The reproduction trait was fertility (FER), which was the number of doe kiddings per mating. The resistance trait was worm fecal egg count (FEC), which is a measurement of the number of gastro-intestinal parasite eggs found in the feces. The resilience trait was the packed cell volume (PCV), which is a measurement of the volume of red blood cells in the blood. Dressing percentage, BW, and FEC were measured at 11 mo of age, which is the mating or selling age. Fertility and PCV were measured on females at each kidding period. The breeding program accounting for the overall breeding goal and a selection index including all traits gave annual selection responses of 800 g for BW, 3.75% for FER, 0.08% for DP, -0.005 ln(eggs/g) for FEC, and 0.28% for PCV. The expected selection responses for BW and DP in this breeding program were reduced by 2% and 6%, respectively, compared with a breeding program not accounting for FEC and PCV. The overall breeding program, proposed for the Creole breed, offers the best breeding strategy in terms of expected selection responses, making it possible to improve all traits together. It offers a good balance between production and adaptation traits and may present some interest for the selection of other goat breeds in the tropics.

Program description of FIBRAM (Fiber Optic Radiation Attenuation Model): a radiation attenuation model for optical fibers

International Nuclear Information System (INIS)

Ingram, W.J.

1987-06-01

The report describes a fiber-optics system model and its computer implementation. This implementation can calculate the bit error ratio (BER) versus time for optical fibers that have been exposed to gamma radiation. The program is designed so that the user may arbitrarily change any or all of the system input variables and produce separate outputs. The primary output of the program is a table of the BER as a function of time. This table may be stored on magnetic media and later incorporated into computer graphic programs. The program was written in FORTRAN 77 for the IBM PC/AT/XT computers. Flow charts and program listings are included in the report

Integrated Project Management System description

International Nuclear Information System (INIS)

1994-09-01

The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

YUCCA MOUNTAIN SITE DESCRIPTION

Energy Technology Data Exchange (ETDEWEB)

A.M. Simmons

2004-04-16

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

Revisiting Employee Assistance Programs and Substance Use Problems in the Workplace: Key Issues and a Research Agenda

OpenAIRE

Levy Merrick, Elizabeth S.; Volpe-Vartanian, Joanna; Horgan, Constance M.; McCann, Bernard

2007-01-01

This column describes employee assistance program (EAPs) and identifies key issues for contemporary EAPs. These programs began as occupational alcohol programs and have evolved into more comprehensive resources. To better understand contemporary EAPs, the authors suggest a research agenda at includes descriptive studies to provide an up-to-date picture of services; investigations of how contemporary EAPs address substance use problems, including management consultation for early identificatio...

43 CFR 43.215 - What must I include in my drug-free awareness program?

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false What must I include in my drug-free awareness program? 43.215 Section 43.215 Public Lands: Interior Office of the Secretary of the Interior GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Requirements for Recipients Other Than Individuals § 43.215 What must I...

Testing the methodology for site descriptive modelling. Application for the Laxemar area

International Nuclear Information System (INIS)

Andersson, Johan; Berglund, Johan; Follin, Sven; Hakami, Eva; Halvarson, Jan; Hermanson, Jan; Laaksoharju, Marcus; Rhen, Ingvar; Wahlgren, C.H.

2002-08-01

A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline and after this

CRAC2 model description

International Nuclear Information System (INIS)

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

1984-03-01

The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

40 CFR 51.362 - Motorist compliance enforcement program oversight.

Science.gov (United States)

2010-07-01

... deviate from established requirements, or in the case of non-government entities that process... registrations; and (10) The prevention of fraudulent procurement or use of inspection documents by controlling... measurements. (c) SIP requirements. The SIP shall include a description of enforcement program oversight and...

Automated Critical PeakPricing Field Tests: 2006 Pilot ProgramDescription and Results

Energy Technology Data Exchange (ETDEWEB)

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-06-19

During 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology evaluation for the Pacific Gas and Electric Company (PG&E) Emerging Technologies Programs. This report summarizes the design, deployment, and results from the 2006 Automated Critical Peak Pricing Program (Auto-CPP). The program was designed to evaluate the feasibility of deploying automation systems that allow customers to participate in critical peak pricing (CPP) with a fully-automated response. The 2006 program was in operation during the entire six-month CPP period from May through October. The methodology for this field study included site recruitment, control strategy development, automation system deployment, and evaluation of sites' participation in actual CPP events through the summer of 2006. LBNL recruited sites in PG&E's territory in northern California through contacts from PG&E account managers, conferences, and industry meetings. Each site contact signed a memorandum of understanding with LBNL that outlined the activities needed to participate in the Auto-CPP program. Each facility worked with LBNL to select and implement control strategies for demand response and developed automation system designs based on existing Internet connectivity and building control systems. Once the automation systems were installed, LBNL conducted communications tests to ensure that the Demand Response Automation Server (DRAS) correctly provided and logged the continuous communications of the CPP signals with the energy management and control system (EMCS) for each site. LBNL also observed and evaluated Demand Response (DR) shed strategies to ensure proper commissioning of controls. The communication system allowed sites to receive day-ahead as well as day-of signals for pre-cooling, a DR strategy used at a few sites. Measurement of demand response was conducted using two different baseline models for estimating peak load savings. One

Generalizing: The descriptive struggle

Directory of Open Access Journals (Sweden)

Barney G. Glaser, Ph.D.; Hon Ph.D.

2006-11-01

Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

RECON: a computer program for analyzing repository economics. Documentation and user's manual. Revision 1

International Nuclear Information System (INIS)

Clark, L.L.; Schutz, M.E.; Luksic, A.T.

1985-07-01

From 1981 through 1984 the Pacific Northwest Laboratory has been developing a computer model named RECON to calculate repository costs from parametric data input. The objective of the program has been to develop the capability to evaluate the effect on costs of changes in repository design parameters and operating scenario assumptions. This report documents the development of the model through September of 1984. Included in the report are: (1) descriptions of model development and the underlying equations, assumptions and definitions; (2) descriptions of data input using either card images or an interactive data input program; and (3) detailed listings of the program and definitions of program variables. Cost estimates generated using the model have been verified against independent estimates and good agreement has been obtained. 2 refs

Entrepreneurship of dietetic program graduates.

Science.gov (United States)

Mann, Linda L; Blum, Ilya

2004-01-01

Successful dietetic program graduates must have an entrepreneurial mindset and skills to respond to environmental changes and consumer trends. The purpose of this study was to determine current or intended entrepreneurship by graduates of a Dietitians of Canada accredited university program, as influenced by self-efficacy stemming from entrepreneurial experiences in education or early career, as well as by internal and external factors. This study employed an exploratory descriptive methodology with a questionnaire mailed to a discrete sample. Ninety graduates completed and returned the questionnaire for a response rate of 55%. Data analysis included descriptive statistics, two-way table analysis, the chi-square test for independence, and Fisher's exact test. Significant relationships were found between self-efficacy scores and entrepreneurial action, specific entrepreneurial experiences and entrepreneurial intent and action, dietetic internship and intent, and belief in the importance of business skills and intent. Those with entrepreneurial intent and/or action identified creativity, dietetic education/internship, persistence, business skills, and family/friend support as helping factors. These results suggest that undergraduate, internship, and continuing education programs for dietitians should incorporate activities that develop entrepreneurial skills and contribute toward an entrepreneurial mindset.

Older Workers and Federal Work Programs: The Korean Senior Employment Program (KSEP).

Science.gov (United States)

Choi, Eunhee

2016-01-01

Federal older worker programs are attracting attention due to the growing number of older workers across the world. They are uniquely situated to provide out-of-market work opportunities to older job seekers, who often find their age a barrier to securing desirable jobs. In 2004, the Korean government established its own program, the Korean Senior Employment Program (KSEP); however, literature for international readers on this innovative program is lacking. Thus, this article aims to provide an in-depth description of KSEP and a brief comparison between the Senior Community Service Employment Program in the U.S. and KSEP. The unique characteristics of KSEP include having the dual program foci on supplemental income and social participation; expanding work opportunities in the private sector beyond community-based jobs; accepting participants who are financially disadvantaged as well as those with a high desire for social participation regardless of their income; and broadening work opportunities for those with professional skills beyond repetitive, simple, and temporary jobs. This article may offer helpful insights to older worker advocates from various countries in creating or modifying their programs.

77 FR 61012 - Expansion of Importer Self-Assessment Program To Include Qualified Importers of Focused...

Science.gov (United States)

2012-10-05

... of International Trade, has determined that the company represents an acceptable risk to CBP, if the... Executive Director, Trade Policy and Programs, Office of International Trade, at [email protected] benefits: Entitled to receive entry summary trade data, including analysis support, from CBP. Consultation...

41 CFR 105-74.215 - What must I include in my drug-free awareness program?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What must I include in my drug-free awareness program? 105-74.215 Section 105-74.215 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

The X-Ray Pebble Recirculation Experiment (X-PREX): Facility Description, Preliminary Discrete Element Method Simulation Validation Studies, and Future Test Program

International Nuclear Information System (INIS)

Laufer, Michael R.; Bickel, Jeffrey E.; Buster, Grant C.; Krumwiede, David L.; Peterson, Per F.

2014-01-01

This paper presents a facility description, preliminary results, and future test program of the new X-Ray Pebble Recirculation Experiment (X-PREX), which is now operational and being used to collect data on the behavior of slow dense granular flows relevant to pebble bed reactor core designs. The X-PREX facility uses digital x-ray tomography methods to track both the translational and rotational motion of spherical pebbles, which provides unique experimental results that can be used to validate discrete element method (DEM) simulations of pebble motion. The validation effort supported by the X-PREX facility provides a means to build confidence in analysis of pebble bed configuration and residence time distributions that impact the neutronics, thermal hydraulics, and safety analysis of pebble bed reactor cores. Preliminary experimental and DEM simulation results are reported for silo drainage, a classical problem in the granular flow literature, at several hopper angles. These studies include conventional converging and novel diverging geometries that provide additional flexibility in the design of pebble bed reactor cores. Excellent agreement is found between the X-PREX experimental and DEM simulation results. Finally, this paper discusses additional studies in progress relevant to the design and analysis of pebble bed reactor cores including pebble recirculation in cylindrical core geometries and evaluation of forces on shut down blades inserted directly into a packed pebble bed. (author)

Building Program Models Incrementally from Informal Descriptions.

Science.gov (United States)

1979-10-01

specified at each step. Since the user controls the interaction, the user may determine the order in which information flows into PMB. Information is received...until only ten years ago the term aautomatic programming" referred to the development of the assemblers, macro expanders, and compilers for these

A model surveillance program based on regulatory experience

International Nuclear Information System (INIS)

Conte, R.J.

1980-01-01

A model surveillance program is presented based on regulatory experience. The program consists of three phases: Program Delineation, Data Acquistion and Data Analysis. Each phase is described in terms of key quality assurance elements and some current philosophies is the United States Licensing Program. Other topics include the application of these ideas to test equipment used in the surveillance progam and audits of the established program. Program Delineation discusses the establishment of administrative controls for organization and the description of responsibilities using the 'Program Coordinator' concept, with assistance from Data Acquisition and Analysis Teams. Ideas regarding frequency of surveillance testing are also presented. The Data Acquisition Phase discusses various methods for acquiring data including operator observations, test procedures, operator logs, and computer output, for trending equipment performance. The Data Analysis Phase discusses the process for drawing conclusions regarding component/equipment service life, proper application, and generic problems through the use of trend analysis and failure rate data. (orig.)

Logical Characterisation of Ontology Construction using Fuzzy Description Logics

DEFF Research Database (Denmark)

Badie, Farshad; Götzsche, Hans

had the extension of ontologies with Fuzzy Logic capabilities which plan to make proper backgrounds for ontology driven reasoning and argumentation on vague and imprecise domains. This presentation conceptualises learning from fuzzy classes using the Inductive Logic Programming framework. Then......, employs Description Logics in characterising and analysing fuzzy statements. And finally, provides a conceptual framework describing fuzzy concept learning in ontologies using the Inductive Logic Programming....

A comprehensive joint replacement program for total knee arthroplasty: a descriptive study

Directory of Open Access Journals (Sweden)

Prefontaine Paul

2008-11-01

Full Text Available Abstract Background Total knee arthroplasty (TKA is a commonly performed surgical procedure in the US. It is important to have a comprehensive inpatient TKA program which maximizes outcomes while minimizing adverse events. The purpose of this study was to describe a TKA program – the Joint Replacement Program (JRP – and report post-surgical outcomes. Methods 74 candidates for a primary TKA were enrolled in the JRP. The JRP was designed to minimize complications and optimize patient-centered outcomes using a team approach including the patient, patient's family, and a multidisciplinary team of health professionals. The JRP consisted of a pre-operative class, standard pathways for medical care, comprehensive peri-operative pain management, aggressive physical therapy (PT, and proactive discharge planning. Measures included functional tests, knee range of motion (ROM, and medical record abstraction of patient demographics, length of stay, discharge disposition, and complications over a 6-month follow-up period. Results All patients achieved medical criteria for hospital discharge. The patients achieved the knee flexion ROM goal of 90° (91.7 ± 5.4°, but did not achieve the knee extension ROM goal of 0° (2.4 ± 2.6°. The length of hospital stay was two days for 53% of the patients, with 39% and 7% discharged in three and four days, respectively. All but three patients were discharged home with functional independence. 68% of these received outpatient physical therapy compared with 32% who received home physical therapy immediately after discharge. Two patients ( Conclusion The comprehensive JRP for TKA was associated with satisfactory clinical outcomes, short lengths of stay, a high percentage of patients discharged home with outpatient PT, and minimal complications. This JRP may represent an efficient, effective and safe protocol for providing care after a TKA.

47 CFR 79.3 - Video description of video programming.

Science.gov (United States)

2010-10-01

... television audience measurement service, based on television viewership in the counties that make up each DMA... other distributor of video programming for residential reception that delivers such programming directly... the national audience share during prime time of nonbroadcast networks, as determined by Nielsen Media...

Materials sciences programs, fiscal year 1994

International Nuclear Information System (INIS)

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects

Materials sciences programs: Fiscal year 1994

Science.gov (United States)

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

Materials sciences programs, fiscal year 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

General Electric's training program for BWR chemists

International Nuclear Information System (INIS)

Osborn, R.N.; Lim, W.

1981-01-01

This paper describes the development and implementation of the General Electric boiling water reactor chemistry training program from 1959 to the present. The original intention of this program was to provide practical hands on type training in radiochemistry to BWR chemistry supervisors with fossil station experience. This emphasis on radiochemistry has not changed through the years, but the training has expanded to include the high purity water chemistry of the BWR and has been modified to include new commission requirements, engineering developments and advanced instrumentation. Student and instructor qualifications are discussed and a description of the spin off courses for chemistry technicians and refresher training is presented

Evaluation of a data dictionary system. [information dissemination and computer systems programs

Science.gov (United States)

Driggers, W. G.

1975-01-01

The usefulness was investigated of a data dictionary/directory system for achieving optimum benefits from existing and planned investments in computer data files in the Data Systems Development Branch and the Institutional Data Systems Division. Potential applications of the data catalogue system are discussed along with an evaluation of the system. Other topics discussed include data description, data structure, programming aids, programming languages, program networks, and test data.

Program description for the program Fuel program sustainability July 1, 2011 through June 30, 2015; Programbeskrivning foer programmet Braensleprogrammet haallbarhet 1 juli 2011 till och med 30 juni 2015

Energy Technology Data Exchange (ETDEWEB)

2011-04-15

The Fuel program sustainability is included as one of three programs in a cohesive commitment to increased, sustainable and efficient production and use of indigenous and renewable fuels that are implemented by the Swedish Energy Agency from July 1, 2011 to June 30, 2015. The program focuses on issues of environment and ecological sustainability of the production of biofuels, and systems and resource issues concerning the use. It does not include purely technical issues related to biofuels production or processes in which fuel is converted to heat, electricity or fuel. Questions about fuel supply and fuel processing / scale combustion are treated in the parallel running programs; the Fuel program supply and the Fuel program conversion. The four-year program will commence on July 1, 2011 and will run until June 30, 2015 and has an annual budget of total SEK 16 millions. Ambiguities in the environmental area may through various regulations mean various forms of barriers on the biofuel market. The Fuel program sustainability aims to sort out such ambiguities and, if possible, eliminate such obstacles, identify solutions and develop opportunities. The availability of biofuels and croplands is limited relative to needs. Thus the program also aims to describe the resource efficiency and climate benefits of current biofuel chains, and the possibility of using instruments to stimulate good practice. The program consists of sub-areas that partly overlap. - The sub-area Environment and sustainability focuses on how biofuel production will be designed to meet national and international environmental objectives and sustainability criteria. - The sub-area Biofuels and greenhouse gases describes different climate aspects related to production and exploitation of biofuels. - The sub-area System and market focuses on resource- and climate-efficient solutions in a system perspective, and how the bio-energy system can be affected by policy instruments

DESCRIPTION OF THE TRITIUM-PRODUCING BURNABLE ABSORBER ROD FOR THE COMMERCIAL LIGHT WATER REACTOR TTQP-1-015 Rev 19

Energy Technology Data Exchange (ETDEWEB)

Burns, Kimberly A.; Love, Edward F.; Thornhill, Cheryl K.

2012-02-01

Tritium-producing burnable absorber rods (TPBARs) used in the U.S. Department of Energy’s Tritium Readiness Program are designed to produce tritium when placed in a Westinghouse or Framatome 17x17 fuel assembly and irradiated in a pressurized water reactor (PWR). This document provides an unclassified description of the current design baseline for the TPBARs. This design baseline is currently valid only for Watts Bar reactor production cores. A description of the Lead Use TPBARs will not be covered in the text of the document, but the applicable drawings, specifications and test plan will be included in the appropriate appendices.

Math Description Engine Software Development Kit

Science.gov (United States)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Education programs catalog

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

Since its formation in 1977, US DOE has been authorized to support education programs that help ensure an adequate supply of scientists, engineers, and technicians for energy-related research, production activities, and technology transfer. A national conference in 1989 produced a clear vision of the important role that DOE, its facilities, and its 169,000 Federal and contract employees can play in the educational life of their communities and the Nation. Many of the programs listed in this catalog are the result of this new vision; others have existed for many years. Purpose of this catalog is to make all DOE education efforts more widely known so that more teachers, students, and others can benefit. Supporting the hundreds of education programs (precollege, undergraduate, graduate, public) is the network of DOE national laboratories, technology centers, and other research facilities. Brief descriptions of each facility, its programs, and contact information for its education personnel are included.

MAPLE-II. A program for plotting fault trees

International Nuclear Information System (INIS)

Poucet, A.; Van Den Muyzenberg, C.L.

1987-01-01

The MAPLE II code is an improved version of the MAPLE program for plotting fault trees. MAPLE II has added features which make it a versatile tool for drawing large and complex logic trees. The code is developed as part of a package for computer aided fault tree construction and analysis in which it is integrated and used as a documentation tool. However the MAPLE II code can be used as a separate program which uses as input a structure function of a tree and a description of the events and gates which make up the tree. This report includes a short description of the code and of its features. Moreover it contains the how-to-use and some indications for implementing the code and for adapting it to different graphics systems

User's manual of program RFIT Pt. 3

International Nuclear Information System (INIS)

Szatmary, Z.

1991-06-01

The RFIT program system was written for the parameter estimation and evaluation of a reactor physics testing project concerning WWER type reactors, to measure reactor physics parameters like neutron flux, reactivity, criticality, reactor kinetics variables etc. It was applied for the ZR-6 critical assembly of CRIP, Budapest. This third part contains the description of all files of experimental data: PDF (raw experimental data), EDF (evaluated data), CLIB (calibration factors). In relation of these files, the description includes the information stored, rules of input preparation and of correcting stored data, options available for manipulating the files. (R.P.)

Integrative Biological Chemistry Program Includes the Use of Informatics Tools, GIS and SAS Software Applications

Science.gov (United States)

D'Souza, Malcolm J.; Kashmar, Richard J.; Hurst, Kent; Fiedler, Frank; Gross, Catherine E.; Deol, Jasbir K.; Wilson, Alora

2015-01-01

Wesley College is a private, primarily undergraduate minority-serving institution located in the historic district of Dover, Delaware (DE). The College recently revised its baccalaureate biological chemistry program requirements to include a one-semester Physical Chemistry for the Life Sciences course and project-based experiential learning…

Description of the DLL regulation interface in HAWC

DEFF Research Database (Denmark)

Larsen, Torben J.

2001-01-01

This report contains a description of the external regulation interface between the aeroelastic code HAWC and a separate regulation unit programmed as a DLL (Dynamic Link Library). Specific HAWC commands used with the regulation as well as simple DLLexamples written in Delphi, Fortran and C...

Three Empowering Curricular Innovations for Service-Learning in ESL Programs

Science.gov (United States)

Perren, James; Grove, Nuray; Thornton, Julie

2013-01-01

This article describes three service-learning projects implemented in three different ESL programs in the United States. Each description includes typical course goals, service-learning assignments, reflection activities, student learning outcomes, and pedagogical challenges. The first project was developing digital literacy through…

Now Enhancing Working Skills: The ``NEWS`` Program. Final report

Energy Technology Data Exchange (ETDEWEB)

Kuiper, A. [Merex Corp. (United States)

1995-01-23

In October of 1992, Los Alamos National Laboratory and Merex Corporation began a pilot basic skills program to enhance workers` skills. The program, known as the NEWS (Now Enhancing Working Skills) Program, was implemented by the Training and Development Group of the Human Resources Division. A group of 106 employees known as Radiological Control Technicians (RCTs) from ESH-1 (Environmental, Safety, and Health) were targeted to take mandated DOE (Department of Energy) training. The main goal of the LANL/Merex partnership was to help RCTs prepare for mandated DOE Rad Con training and job performance by improving their information processing and math skills. A second goal of this project was to use the information from this small group to make some predictions about the Laboratory as a whole. This final report contains the description and an appendix for the ``NEWS`` program. The topics in this report include Merex class descriptions, test score results for the MAT, the WAT, the TABE, and Challenge test, a follow-up survey to Merex IPS and math training, student feedback statistics for skills programs, and lessons learned from the program.

Gaps in the existing public health informatics training programs: a challenge to the development of a skilled global workforce.

Science.gov (United States)

Joshi, Ashish; Perin, Douglas Marcel Puricelli

2012-01-01

The objective of this study was to explore public health informatics (PHI) training programs that currently exist to meet the growing demand for a trained global workforce. We used several search engines, scientific databases, and the websites of informatics organizations; sources included PubMed, Google, the American Medical Informatics Organization, and the International Medical Informatics Organization. The search was conducted from May to July 2011 and from January to February 2012 using key words such as informatics, public health informatics, or biomedical informatics along with academic programs, training, certificate, graduate programs, or postgraduate programs. Course titles and catalog descriptions were gathered from the program or institution websites. Variables included PHI program categories, location and mode of delivery, program credits, and costs. Each course was then categorized based on its title and description as available on the Internet. Finally, we matched course titles and descriptions with the competencies for PHIs determined by Centers for Disease Control and Prevention (CDC). Descriptive analysis was performed to report means and frequency distributions for continuous and categorical variables. Stratified analysis was performed to explore average credits and cost per credit among both the public and private institutions. Fifteen PHI programs were identified across 13 different institutions, the majority of which were US-based. The average number of credits and the associated costs required to obtain PHI training were much higher in private as compared to public institutions. The study results suggest that a need for online contextual and cost-effective PHI training programs exists to address the growing needs of professionals worldwide who are using technology to improve public health in their respective countries.

40 CFR 70.4 - State program submittals and transition.

Science.gov (United States)

2010-07-01

... description in narrative form of the scope, structure, coverage, and processes of the State program. (ii) A description of the organization and structure of the agency or agencies that will have responsibility for... strategies). (5) A complete description of the State's compliance tracking and enforcement program or...

[Productivity of doctoral programs in Psychology with Quality Mention in journal articles included in Journal Citation Reports].

Science.gov (United States)

Musi-Lechuga, Bertha; Olivas-Ávila, José; Castro, Angel

2011-08-01

The main objective of the present study was to classify doctoral programs with Quality Mention in Psychology based on their scientific productivity. For this purpose, articles in the Web of Science published by professors teaching in these doctoral programs were analyzed. In addition, we analyzed scientific journals in which these professors tend to publish more papers and the evolution in the number of papers published until 2009. Results showed that the most productive doctoral program was the Neurosciences program at the University of Oviedo. This program showed a ratio of 40 articles--published in journals included in Journal Citation Reports--by each professor. In contrast, other programs did not reach a ratio of 10 articles per professor. Regarding journals, results showed that 9 out of the 20 most popular journals are Hispanic and a gradual increase in the number of published papers was also observed. Lastly, results and implications for quality assessment are discussed.

A simulation program for electronics experiments

International Nuclear Information System (INIS)

Brun, R.; Hagelberg, R.; Hansroul, M.; Lassalle, Jc.

1978-01-01

A general description of the GEANT program is given. The GEANT program has been designed to cover a wide variety of particle detectors. The program is separated into 4 independent parts: kinematics generation, trackina in space, tracks intersection with detectors and digitization of detector information. The tracking requires the introduction of the experimental set-up description in terms of media. The detectors are described independently of the media in a separate way. The media and detector description have to be furnished by the user. The implementation of the GEANT program is based on 2 sets of subprograms: a fixed set of subprograms, which are independent of the experimental situation and thus transparent to the user; a set of user subprograms which should be written by the user. The GEANT program produces results stored in data banks, which the user can convert into his own format. In addition the GEANT program provides printed and graphical outputs

The transportation operations system: A description

International Nuclear Information System (INIS)

Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

1990-01-01

This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

Hanford Site waste minimization and pollution prevention awareness program plan

International Nuclear Information System (INIS)

Place, B.G.

1998-01-01

This plan, which is required by US Department of Energy (DOE) Order 5400. 1, provides waste minimization and pollution prevention guidance for all Hanford Site contractors. The plan is primary in a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan, Prime contractor implementation plans, and the Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation (DOE-RL, 1997a) describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Items discussed include the pollution prevention policy and regulatory background, organizational structure, the major objectives and goals of Hanford Site's pollution prevention program, and an itemized description of the Hanford Site pollution prevention program. The document also includes US Department of Energy, Richland Operations Office's (RL's) statement of policy on pollution prevention as well as a listing of regulatory drivers that require a pollution prevention program

World Perspective Case Descriptions on Educational Programs for Adults: India.

Science.gov (United States)

Jayagopal, R.; Burns, E. P.

Four adult education programs being conducted in India are described in the case studies in this packet. Two of the projects involve literacy; the third promotes literacy as one part of its community development program, and the fourth trains workers in hotel management and catering technology. The literacy programs are (1) development of a…

Program Plan: field radionuclide migration studies in Climax granite

International Nuclear Information System (INIS)

Isherwood, D.; Raber, E.; Coles, D.; Stone, R.

1980-01-01

This Program Plan describes the field radionuclide migration studies we plan to conduct in the Climax granite at the Nevada Test Site. Laboratory support studies are included to help us understand the geochemical and hydrologic processes involved in the field. The Program Plan begins with background information (Section 1) on how this program fits into the National Waste Terminal Storage Program Plan and discusses the needs for field studies of this type. The objectives stated in Section 2 are in direct response to these needs, particularly the need to determine whether laboratory studies accurately reflect actual field conditions and the need for field testing to provide a data base for verification of hydrologic and mass transport models. The technical scope (Section 3) provides a work breakdown structure that integrates the various activities and establishes a base for the technical approach described in Section 4. Our approach combines an interactive system of field and laboratory migration experiments with the use of hydrologic models for pre-test predictions and data interpretation. Section 5 on program interfaces identifies how information will be transferred to other related DOE projects. A schedule of activities and major milestones (Section 6) and the budget necessary to meet the project objectives (Section 7) are included in the Program Plan. Sections 8 and 9 contain brief descriptions of how the technical and program controls will be established and maintained and an outline of our quality assurance program. This program plan is an initial planning document and provides a general description of activities. An Engineering Test Plan containing detailed experimental test plans, an instrumentation plan and equipment design drawings will be published as a separate document

Program of Hanford high-level waste retrieval task: a narrative description

International Nuclear Information System (INIS)

Wallskog, H.A.

1976-12-01

The objective of this task is to develop and demonstrate the equipment and methods for the retrieval of high-level radioactive wastes from underground storage tanks at Hanford. The approach will be to continue with engineering studies and the conceptual design in progress and follow on with the engineering design, construction, testing and demonstration of a Prototype Retrieval System. This system will consist of a large, mobile platform providing the support and control of an articulated arm used to remotely position waste recovery/removal tools. Other major components include the equipment needed to bring the material up to the platform for packaging and subsequent transport to a processing facility, and the television viewing and lighting subsystem. This prototype system will be functionally complete and will contain items such as a control center, tool change and maintenance/repair capability, etc. The program includes a complete non-radioactive demonstration of the system in a mock waste tank as well as a radioactive demonstration involving one or more waste tanks

CONTRIBUTIONS FOR DEVELOPING OF A COMPUTER AIDED LEARNING ENVIRONMENT OF DESCRIPTIVE GEOMETRY

Directory of Open Access Journals (Sweden)

Antonescu Ion

2009-07-01

Full Text Available The paper presents the authors’ contributions for developing a computer code for teaching of descriptive geometry using the computer aided learning techniques. The program was implemented using the programming interface and the 3D modeling capabilities of the AutoCAD system.

Strategic environmental safety inspection for the National disposal program. Description of the inspection volume. Documentation for the scoping team; Strategische Umweltpruefung zum Nationalen Entsorgungsprogramm. Beschreibung des Untersuchungsumfangs. Unterlage fuer den Scoping-Termin

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-01-06

The Strategic environmental safety inspection for the National disposal program covers the following topics: Legal framework: determination of the requirement for an environmental inspection program, coordination of the scoping team into the overall context; environmental targets; approach for assessment and evaluation of environmental impact, description of the inspection targets for the strategic environmental inspection; consideration of alternatives.

42 CFR 137.275 - May Self-Governance Tribes include IHS construction programs in a construction project agreement...

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May Self-Governance Tribes include IHS construction... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Purpose and Scope § 137.275 May Self-Governance Tribes include IHS construction programs in a construction project agreement or in a funding...

Reliability and safety analysis methodology in the nuclear programs of ERDA

International Nuclear Information System (INIS)

Hannum, W.H.; Gavigan, F.X.; Emon, D.E.

1976-01-01

After discussing the general need for and advantages of risk analysis, including a summary of the previous application of risk concepts to reactor systems, descriptions are given of the existing and planned programs funded by the U.S. Energy Research and Development Administration for use in advanced nuclear reactor systems. Some of the results from existing programs are given, and future efforts are described. 32 refs

Social cognition intervention in schizophrenia: Description of the training of affect recognition program - Indian version.

Science.gov (United States)

Thonse, Umesh; Behere, Rishikesh V; Frommann, Nicole; Sharma, Psvn

2018-01-01

Social cognition refers to mental operations involved in processing of social cues and includes the domains of emotion processing, Theory of Mind (ToM), social perception, social knowledge and attributional bias. Significant deficits in ToM, emotion perception and social perception have been demonstrated in schizophrenia which can have an impact on socio-occupational functioning. Intervention modules for social cognition have demonstrated moderate effect sizes for improving emotion identification and discrimination. We describe the Indian version of the Training of Affect Recognition (TAR) program and a pilot study to demonstrate the feasibility of administering this intervention program in the Indian population. We also discuss the cultural sensibilities in adopting an intervention program for the Indian setting. To the best of our knowledge this is the first intervention program for social cognition for use in persons with schizophrenia in India. Copyright © 2017 Elsevier B.V. All rights reserved.

A DESCRIPTION OF BUFO PARDALIS TADPOLES (ANURA ...

African Journals Online (AJOL)

Tadpoles of Bufo parda/is Hewitt from Kei Road, Cape Province, are described. INTRODUCTION. Although tadpoles of B. pardalis have been included in Van Dijk's (1971) key to the genus Bufa, no adequate description of this taxon has yet been published. Further studies on variability depend upon a complete description ...

System Design Description for the TMAD Code

International Nuclear Information System (INIS)

Finfrock, S.H.

1995-01-01

This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Program SYVAC, for stochastic assessment of nuclear fuel waste disposal

International Nuclear Information System (INIS)

Sherman, G.R.; Hoffman, K.J.; Donahue, D.C.

1985-01-01

In this paper, the computer program SYVAC, used to assess concepts for the disposal of nuclear fuel waste, is described with regard to the development approach, the basic program structure, and quality assurance. The interrelationships of these aspects are illustrated by detailed descriptions of two concepts of fundamental importance to the program: the method of selecting parameter values from input probability density functions, and the numerical evaluation of the convolution integral. Quality assurance procedures, including different types of comparisons and peer review, are presented

Interim reliability-evaluation program: analysis of the Browns Ferry, Unit 1, nuclear plant. Appendix B - system descriptions and fault trees

International Nuclear Information System (INIS)

Mays, S.E.; Poloski, J.P.; Sullivan, W.H.; Trainer, J.E.; Bertucio, R.C.; Leahy, T.J.

1982-07-01

This report describes a risk study of the Browns Ferry, Unit 1, nuclear plant. The study is one of four such studies sponsored by the NRC Office of Research, Division of Risk Assessment, as part of its Interim Reliability Evaluation Program (IREP), Phase II. This report is contained in four volumes: a main report and three appendixes. Appendix B provides a description of Browns Ferry, Unit 1, plant systems and the failure evaluation of those systems as they apply to accidents at Browns Ferry. Information is presented concerning front-line system fault analysis; support system fault analysis; human error models and probabilities; and generic control circuit analyses

Assessment of the Business Administration and Business Management Programs.

Science.gov (United States)

Forestieri, Kathleen; Karlen, Janice; Coiro, Robert; Gabriel, Theodore; Leff, Elaine; Silverman, Barry; Wertheimer, David

This document presents City University of New York LaGuardia Community College's Department of Accounting and Managerial Studies assessment of its business and administration and business management programs report, and includes the following items: (1) a description of the mission and goals of the Department of Accounting and Managerial Studies;…

An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

Science.gov (United States)

Roth, G. S.; Teuschler, J. M.; Budde, W. L.

1982-07-01

The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

Description of a program for steam generators; Descripcion de un programa de generadores de vapor

Energy Technology Data Exchange (ETDEWEB)

Campana, F. J.

2014-10-01

Steam Generators (SGs) are a key component of PWR nuclear power plants, maintaining their structural integrity throughout their life time is necessary to allow for long term operation (LTD) of PWR plants. NEI 97-06 provides the fundamental elements to be included in a SG Program. In addiction it describes performance criteria that SG tubes have to meet in order to provide reasonable assurance that the tubes are still able to maintain specific safety function. Hence, it is mandatory for plants with SGs to have defined a SG program consistent with NEI 97-06 and contains the elements which are described by it. This Program must contain some elements such as, Degradation Assessment, inspection and Integrity Assessment, among other. (Author)

GENMOD - A program for internal dosimetry calculations

International Nuclear Information System (INIS)

Dunford, D.W.; Johnson, J.R.

1987-12-01

The computer code GENMOD was created to calculate the retention and excretion, and the integrated retention for selected radionuclides under a variety of exposure conditions. Since the creation of GENMOD new models have been developed and interfaced to GENMOD. This report describes the models now included in GENMOD, the dosimetry factors database, and gives a brief description of the GENMOD program

Specific balance training included in an endurance-resistance exercise program improves postural balance in elderly patients undergoing haemodialysis.

Science.gov (United States)

Frih, Bechir; Mkacher, Wajdi; Jaafar, Hamdi; Frih, Ameur; Ben Salah, Zohra; El May, Mezry; Hammami, Mohamed

2018-04-01

The purpose of this study was to evaluate the effects of 6 months of specific balance training included in endurance-resistance program on postural balance in haemodialysis (HD) patients. Forty-nine male patients undergoing HD were randomly assigned to an intervention group (balance training included in an endurance-resistance training, n = 26) or a control group (resistance-endurance training only, n = 23). Postural control was assessed using six clinical tests; Timed Up and Go test, Tinetti Mobility Test, Berg Balance Scale, Unipodal Stance test, Mini-Balance Evaluation Systems Test and Activities Balance Confidence scale. All balance measures increased significantly after the period of rehabilitation training in the intervention group. Only the Timed Up and Go, Berg Balance Scale, Mini-Balance Evaluation Systems Test and Activities Balance Confidence scores were improved in the control group. The ranges of change in these tests were greater in the balance training group. In HD patients, specific balance training included in a usual endurance-resistance training program improves static and dynamic balance better than endurance-resistance training only. Implications for rehabilitation Rehabilitation using exercise in haemodialysis patients improved global mobility and functional abilities. Specific balance training included in usual endurance resistance training program could lead to improved static and dynamic balance.

PTAC: a computer program for pressure-transient analysis, including the effects of cavitation. [LMFBR

Energy Technology Data Exchange (ETDEWEB)

Kot, C A; Youngdahl, C K

1978-09-01

PTAC was developed to predict pressure transients in nuclear-power-plant piping systems in which the possibility of cavitation must be considered. The program performs linear or nonlinear fluid-hammer calculations, using a fixed-grid method-of-characteristics solution procedure. In addition to pipe friction and elasticity, the program can treat a variety of flow components, pipe junctions, and boundary conditions, including arbitrary pressure sources and a sodium/water reaction. Essential features of transient cavitation are modeled by a modified column-separation technique. Comparisons of calculated results with available experimental data, for a simple piping arrangement, show good agreement and provide validation of the computational cavitation model. Calculations for a variety of piping networks, containing either liquid sodium or water, demonstrate the versatility of PTAC and clearly show that neglecting cavitation leads to erroneous predictions of pressure-time histories.

A tool to include gamma analysis software into a quality assurance program.

Science.gov (United States)

Agnew, Christina E; McGarry, Conor K

2016-03-01

To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

The use of forests to mitigate global warming - designing programs that work for utilities

International Nuclear Information System (INIS)

Holmes, N.R.

1990-01-01

This paper discusses the use of forests as carbon sinks by utilities to offset carbon dioxide production by fossil-fueled power plants. The topics of the paper include greenhouse gases, greenhouse effect, why trees are carbon sinks, planning a carbon sequestering program based on trees and forests, and descriptions of specific types of programs

Emended description of Campylobacter sputorum and revision of its infrasubspecific (biovar) divisions, including C-sputorum biovar paraureolyticus, a urease-producing variant from cattle and humans

DEFF Research Database (Denmark)

On, S.L.W.; Atabay, H.I.; Corry, J.E.L.

1998-01-01

A polyphasic taxonomic study of 15 bovine and human strains assigned to the catalase-negative, urease-positive campylobacter (CNUPC) group identified these bacteria as a novel, ureolytic biovar of Campylobacter sputorum for which we propose the name C. sputorum bv. paraureolyticus: suitable...... should be revised to include by. sputorum for catalase-negative strains; by. fecalis for catalase-positive strains; and by. paraureolyticus for urease-positive strains. Strains classified previously as by. bubulus should be reclassified as by. sputorum. The species description of C. sputorum is revised...

Clean Coal Technology Programs: Completed Projects (Volume 2)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Review of financial incentive, low-income, elderly and multifamily residential conservation programs

Energy Technology Data Exchange (ETDEWEB)

Berry, L.; Hubbard, M.; White, D.

1986-09-01

This report describes thirty-nine utility-sponsored residential conservation programs for four types of markets. The program types considered are: (1) financial incentive programs for the general residential market, (2) programs for low-income households, (3) programs for the elderly, and (4) programs for the multifamily market. Each program description contains information on incentive terms, eligibility, conservation measures, program history, design and marketing, and the utility/agency motivation for operating the program. The names, addresses and phone numbers of contact persons also are included. Two methods were used to select the programs to be described. First, nominations of successful programs of each type were solicited from experts on residential energy conservation. Second, managers of the programs on this initial list were asked to describe their programs and to suggest other successful programs that should be included in the sample. Because of the selection process used, this report covers mainly the best known and most frequently studied programs that are aimed at the four market types.

ACCULIB, Program Library of Mathematical Routines

International Nuclear Information System (INIS)

Van Kats, J.M.; Rusman, C.J.; Van der Vorst, H.A.

1987-01-01

Description of program or function - ACCULIB is a collection of programs and subprograms for: - approximation and interpolation problems; - the evaluation of series of orthogonal polynomials; - evaluation of the complementary error function; - sorting problems and permutations; - differential equation problems; - linear algebra eigenvalue problems; - optimization problems; - fast Fourier transformations and Fourier series; - numerical quadrature of continuous functions; - linear systems and other linear algebra problems; - bit manipulation and character handling/transmission; - systems of nonlinear equations, in particular the determination of zeros of polynomials; - solution of over-complete systems; - plotting routines for contouring and surface representation; - statistical investigation of data. In addition, many utilities such as code conversion, microfiche production, disk file surveys, layout improvements for ALGOL60 and FORTRAN programs, and the conversion of IBM FORTRAN programs to CDC FORTRAN are included in the collection

Advanced theoretical and experimental studies in automatic control and information systems. [including mathematical programming and game theory

Science.gov (United States)

Desoer, C. A.; Polak, E.; Zadeh, L. A.

1974-01-01

A series of research projects is briefly summarized which includes investigations in the following areas: (1) mathematical programming problems for large system and infinite-dimensional spaces, (2) bounded-input bounded-output stability, (3) non-parametric approximations, and (4) differential games. A list of reports and papers which were published over the ten year period of research is included.

Including nonadditive genetic effects in mating programs to maximize dairy farm profitability.

Science.gov (United States)

Aliloo, H; Pryce, J E; González-Recio, O; Cocks, B G; Goddard, M E; Hayes, B J

2017-02-01

We compared the outcome of mating programs based on different evaluation models that included nonadditive genetic effects (dominance and heterozygosity) in addition to additive effects. The additive and dominance marker effects and the values of regression on average heterozygosity were estimated using 632,003 single nucleotide polymorphisms from 7,902 and 7,510 Holstein cows with calving interval and production (milk, fat, and protein yields) records, respectively. Expected progeny values were computed based on the estimated genetic effects and genotype probabilities of hypothetical progeny from matings between the available genotyped cows and the top 50 young genomic bulls. An index combining the traits based on their economic values was developed and used to evaluate the performance of different mating scenarios in terms of dollar profit. We observed that mating programs with nonadditive genetic effects performed better than a model with only additive effects. Mating programs with dominance and heterozygosity effects increased milk, fat, and protein yields by up to 38, 1.57, and 1.21 kg, respectively. The inclusion of dominance and heterozygosity effects decreased calving interval by up to 0.70 d compared with random mating. The average reduction in progeny inbreeding by the inclusion of nonadditive genetic effects in matings compared with random mating was between 0.25 to 1.57 and 0.64 to 1.57 percentage points for calving interval and production traits, respectively. The reduction in inbreeding was accompanied by an average of A$8.42 (Australian dollars) more profit per mating for a model with additive, dominance, and heterozygosity effects compared with random mating. Mate allocations that benefit from nonadditive genetic effects can improve progeny performance only in the generation where it is being implemented, and the gain from specific combining abilities cannot be accumulated over generations. Continuous updating of genomic predictions and mate

TRU Waste Management Program. Cost/schedule optimization analysis

International Nuclear Information System (INIS)

Detamore, J.A.; Raudenbush, M.H.; Wolaver, R.W.; Hastings, G.A.

1985-10-01

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office Rockwell International (JIO/RI) during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, task monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short-term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. Systems models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions

RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Volume II. Program implementation

International Nuclear Information System (INIS)

1976-06-01

A discussion is presented of the use of the RELAP4/MOD5 computer program in simulating the thermal-hydraulic behavior of light-water reactor systems when subjected to postulated transients such as a LOCA, pump failure, or nuclear excursion. The volume is divided into main sections which cover: (1) program description, (2) input data, (3) problem initialization, (4) user guidelines, (5) output discussion, (6) source program description, (7) implementation requirements, (8) data files, (9) description of PLOTR4M, (10) description of STH20, (11) summary flowchart, (12) sample problems, (13) problem definition, and (14) problem input

DIMAC program user's manual

International Nuclear Information System (INIS)

Lee, Byoung Oon; Song, Tae Young

2003-11-01

DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this report

DIMAC program user's manual

Energy Technology Data Exchange (ETDEWEB)

Lee, Byoung Oon; Song, Tae Young

2003-11-01

DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this repo0008.

Description of the Design and Implementation of a School-Based Obesity Prevention Program Addressing Needs of Middle School Students

Science.gov (United States)

Ward-Begnoche, Wendy L.; Gance-Cleveland, Bonnie; Harris, Margaret M.; Dean, Janice

2008-01-01

This article describes the design and implementation of a school-based obesity prevention program, the successes associated with its implementation, and challenges with development and application of the program's curriculum base. The program is described, including purpose and goals, content and structure of the curriculum, type and training of…

75 FR 43510 - Office of Innovation and Improvement; Overview Information; Charter Schools Program (CSP) Grants...

Science.gov (United States)

2010-07-26

... providing financial assistance for the planning, program design, and initial implementation of charter... schools. The Secretary also encourages the applicant to include a description of the degree of autonomy... performance report, including financial information, as directed by the Secretary. If you receive a multi-year...

MDEP Generic Common Position No DICWG-05. Common position on the treatment of hardware description language (HDL) programmed devices for use in nuclear safety systems

International Nuclear Information System (INIS)

2013-01-01

Following other industries, the nuclear industry developed increasing interest in the use of programmable logic components that are implemented using hardware description language (HDL) such as such as FPGAs, CPLDs or ASICs. HDL programmed devices (HPD) has both characteristics of software and hardware. Therefore applications using HPDs has many similarities with the traditional software (in particular the design may be affected by errors) and characteristics of traditional electronic design (e.g. electronic-level timing and electrical issues). However, due to the unique nature of HPDs, there exist several differences between HPDs and traditional software. Some key differences include: - HPDs use parallel processing with dedicated hardware for each function instead of executing instructions sequentially as in the case of traditional software. - Safety critical software uses imperative languages which specify each instruction of the program whereas HPDs use declarative languages. - The target of software is a microprocessor, which guarantees properties such as memory consistency after each instruction. Such properties are not inherent in HPDs and thus the design process needs different steps to build and guarantee behavioural properties. - Translation of the HDL description to bit-streams in HPDs is much more involved than the translation of source code to binary in software compilation. In the HPD case, this process is not fully automatic, and therefore designer must guide the tools, which may result in undetectable errors. The Digital Instrumentation and Controls Working Group (DICWG) has agreed that a common position on this topic is warranted given the increase of use of Digital I and C in new reactor designs, its safety implications, and the need to develop a common understanding from the perspectives of regulatory authorities. This action follows the DICWG examination of the regulatory requirements of the participating members and of relevant industry

Educating change agents: a qualitative descriptive study of graduates of a Master's program in evidence-based practice.

Science.gov (United States)

Hole, Grete Oline; Brenna, Sissel Johansson; Graverholt, Birgitte; Ciliska, Donna; Nortvedt, Monica Wammen

2016-02-25

Health care professionals are expected to build decisions upon evidence. This implies decisions based on the best available, current, valid and relevant evidence, informed by clinical expertise and patient values. A multi-professional master's program in evidence-based practice was developed and offered. The aims of this study were to explore how students in this program viewed their ability to apply evidence-based practice and their perceptions of what constitute necessary conditions to implement evidence-based practice in health care organizations, one year after graduation. A qualitative descriptive design was chosen to examine the graduates' experiences. All students in the first two cohorts of the program were invited to participate. Six focus-group interviews, with a total of 21 participants, and a telephone interview of one participant were conducted. The data was analyzed thematically, using the themes from the interview guide as the starting point. The graduates reported that an overall necessary condition for evidence-based practice to occur is the existence of a "readiness for change" both at an individual level and at the organizational level. They described that they gained personal knowledge and skills to be "change-agents" with "self-efficacy, "analytic competence" and "tools" to implement evidence based practice in clinical care. An organizational culture of a "learning organization" was also required, where leaders have an "awareness of evidence- based practice", and see the need for creating "evidence-based networks". One year after graduation the participants saw themselves as "change agents" prepared to improve clinical care within a learning organization. The results of this study provides useful information for facilitating the implementation of EBP both from educational and health care organizational perspectives.

75 FR 52010 - Land and Water Conservation Fund Description and Notification, Performance Reports, Agreements...

Science.gov (United States)

2010-08-24

... DEPARTMENT OF THE INTERIOR National Park Service Land and Water Conservation Fund Description and.... SUPPLEMENTARY INFORMATION: The Land and Water Conservation Fund Act of 1965 (LWCF Act) (16 U.S.C 4601-4 et seq... for this program: 1. Description and Notification Form Title: Land and Water Conservation Fund...

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

Description of the KEEP Reading Curriculum, 1975-76. Technical Report No. 43.

Science.gov (United States)

Au, Kathryn H.

The Kamehameha Early Education Program (KEEP) is a research and development program designed to develop, demonstrate, and disseminate methods for improving the education of Hawaiian and part-Hawaiian children; this report contains a description of the reading curriculum used in the KEEP demonstration school during the 1975-76 school year. The…

Physics Division Argonne National Laboratory description of the programs and facilities.

Energy Technology Data Exchange (ETDEWEB)

Thayer, K.J. [ed.

1999-05-24

The ANL Physics Division traces its roots to nuclear physics research at the University of Chicago around the time of the second world war. Following the move from the University of Chicago out to the present Argonne site and the formation of Argonne National Laboratory: the Physics Division has had a tradition of research into fundamental aspects of nuclear and atomic physics. Initially, the emphasis was on areas such as neutron physics, mass spectrometry, and theoretical studies of the nuclear shell model. Maria Goeppert Maier was an employee in the Physics Division during the time she did her Nobel-Prize-winning work on the nuclear shell model. These interests diversified and at the present time the research addresses a wide range of current problems in nuclear and atomic physics. The major emphasis of the current experimental nuclear physics research is in heavy-ion physics, centered around the ATLAS facility (Argonne Tandem-Linac Accelerator System) with its new injector providing intense, energetic ion beams over the fill mass range up to uranium. ATLAS is a designated National User Facility and is based on superconducting radio-frequency technology developed in the Physics Division. A small program continues in accelerator development. In addition, the Division has a strong program in medium-energy nuclear physics carried out at a variety of major national and international facilities. The nuclear theory research in the Division spans a wide range of interests including nuclear dynamics with subnucleonic degrees of freedom, dynamics of many-nucleon systems, nuclear structure, and heavy-ion interactions. This research makes contact with experimental research programs in intermediate-energy and heavy-ion physics, both within the Division and on the national and international scale. The Physics Division traditionally has strong connections with the nation's universities. We have many visiting faculty members and we encourage students to participate in our

The program LISE: a simulation of fragment separators

International Nuclear Information System (INIS)

Bazin, D.; Tarasov, O.; Lewitowicz, M.; Sorlin, O.

2001-01-01

The program LISE, which simulates the operation of fragment separators, used in the production of radioactive beams via fragmentation is described. Various aspects of the physical phenomenon involved in the production of such radioactive beams are discussed. They include fragmentation cross sections, energy losses in materials, ionic charge state distributions, as well as ion optics calculations and acceptance effects. Among the goals of this program is a highly user-friendly environment, designed not only to forecast intensities and purities for future experiments, but also as a tuning tool during experiments where its results can be quickly compared to on-line data. In addition, several general purpose tools such as a physical parameters calculator, a database of nuclei properties, and relativistic two-body kinematics calculations make it also attractive in experiments where radioactive beams are not involved. After a general description of fragment separators, the principles underlying the calculations are presented, followed by a practical description of the program and its many features. Finally, a few examples of calculations are compared to on-line data, both qualitatively and quantitatively

Proceedings of the of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010)

DEFF Research Database (Denmark)

Brabrand, Claus

2010-01-01

-Louis Giavitto ("A Domain Specific Language for Complex Natural & Artificial Systems Simulations") and the 11 contributed papers that were selected for presentation and the proceedings by the programme committee from 30 submissions (i.e., 37% acceptance rate). Every submission was reviewed by at least three......This volume contains the proceedings of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010), held in Paphos, Cyprus on March 28--29, 2010. LDTA is a two-day satellite event of ETAPS (European Joint Conferences on Theory and Practice of Software) organized in cooperation...... with ACM Sigplan. LDTA is an application and tool-oriented forum on meta programming in a broad sense. A meta program is a program that takes other programs as input or output. The focus of LDTA is on generated or otherwise efficiently implemented meta programs, possibly using high level descriptions...

Overview of the Novel Intelligent JAXA Active Rotor Program

Science.gov (United States)

Saito, Shigeru; Kobiki, Noboru; Tanabe, Yasutada; Johnson, Wayne; Yamauchi, Gloria K.; Young, Larry A.

2010-01-01

The Novel Intelligent JAXA Active Rotor (NINJA Rotor) program is a cooperative effort between JAXA and NASA, involving a test of a JAXA pressure-instrumented, active-flap rotor in the 40- by 80-Foot Wind Tunnel at Ames Research Center. The objectives of the program are to obtain an experimental database of a rotor with active flaps and blade pressure instrumentation, and to use that data to develop analyses to predict the aerodynamic and aeroacoustic performance of rotors with active flaps. An overview of the program is presented, including a description of the rotor and preliminary pretest calculations.

[Quality of food: perceptions of 'Bolsa Familia' program participants].

Science.gov (United States)

Uchimura, Kátia Yumi; Bosi, Maria Lúcia Magalhães; Lima, Flávia Emília Leite de; Dobrykopf, Vanessa França

2012-03-01

This study deals with perceptions of beneficiaries of the 'Bolsa Familia' Program, in Curitiba, southern Brazil, about their feeding habits. To understand the perceptions of participants of the 'Bolsa Família' Program on the quality of their food. A qualitative study based on the critical-interpretive tradition, which used individual interviews as a technique for gathering empirical data from the informants. The study included 38 individuals, members of families included in the program. The discursive content was recorded on digital media and, thereafter, transcribed and analyzed. After categorization, three main themes emerged: a description of food, quality of food, and feelings and experiences of individuals enrolled in the program. the acknowledgement of social vulnerability and consequent feeding habit insecurity to which such groups are subject was the main finding, as well as feelings of resignation.

Description, prescription and the choice of discount rates

International Nuclear Information System (INIS)

Baum, Seth D.

2009-01-01

The choice of discount rates is a key issue in the analysis of long-term societal issues, in particular environmental issues such as climate change. Approaches to choosing discount rates are generally placed into two categories: the descriptive approach and the prescriptive approach. The descriptive approach is often justified on grounds that it uses a description of how society discounts instead of having analysts impose their own discounting views on society. This paper analyzes the common forms of the descriptive and prescriptive approaches and finds that, in contrast with customary thinking, both forms are equally descriptive and prescriptive. The prescriptions concern who has standing (i.e. who is included) in society, how the views of these individuals are measured, and how the measurements are aggregated. Such prescriptions are necessary to choose from among the many possible descriptions of how society discounts. The descriptions are the measurements made given a choice of measurement technique. Thus, the labels 'descriptive approach' and 'prescriptive approach' are deeply misleading, as analysts cannot avoid imposing their own views on society. (author)

Veterans in Society Conference 2014: Humanizing the Discourse (Conference Program)

OpenAIRE

Virginia Tech. Department of English. Center for the Study of Rhetoric in Society; Virginia Tech. Veterans Studies Group

2014-01-01

This program lists the daily sessions, presentations, and events that took place during the 2014 Veterans in Society Conference, which was held from April 27-28, 2014 at the Hotel Roanoke in Roanoke, VA. This program also includes speaker and presenter bios, descriptions of unrecorded conference events, and a letter from conference co-chair Jim Dubinsky, the director of Virginia Tech's Center for the Study of Rhetoric in Society. The 2014 Veterans in Society Conference: Humanizing the Discour...

Advisory processes and their descriptive data

Directory of Open Access Journals (Sweden)

Milan Mišovič

2005-01-01

Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

Mississippi Curriculum Framework for Welding and Cutting Programs (Program CIP: 48.0508--Welder/Welding Technologist). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the welding and cutting programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Graphic Interface for LCP2 Optimization Program

DEFF Research Database (Denmark)

Nicolae, Taropa Laurentiu; Gaunholt, Hans

1998-01-01

This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...... of the project. The program is written in Visual C++5.0 on a Windows NT4.0 operating system.......This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

XML Translator for Interface Descriptions

Science.gov (United States)

Boroson, Elizabeth R.

2009-01-01

A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

Atmospheric Science Program. Summaries of research in FY 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

This report provides descriptions for all projects funded by ESD under annual contracts in FY 1994. Each description contains the project`s title; three-year funding history (in thousands of dollars); the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date (for most projects older than one year). Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded by a brief text that defines the program area, states it goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used.

Waterborne Release Monitoring and Surveillance Programs at the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Blanchard, A.

1999-03-26

This report documents the liquid release environmental compliance programs currently in place at the Savannah river Site (SRS). Included are descriptions of stream monitoring programs, which measure chemical parameters and radionuclides in site streams and the Savannah river and test representative biological communities within the streams for chemical and radiological uptake. This report also explains the field sampling and analytical capabilities that are available at SRS during both normal and emergency conditions.

Waterborne Release Monitoring and Surveillance Programs at the Savannah River Site

International Nuclear Information System (INIS)

Blanchard, A.

1999-01-01

This report documents the liquid release environmental compliance programs currently in place at the Savannah river Site (SRS). Included are descriptions of stream monitoring programs, which measure chemical parameters and radionuclides in site streams and the Savannah river and test representative biological communities within the streams for chemical and radiological uptake. This report also explains the field sampling and analytical capabilities that are available at SRS during both normal and emergency conditions

34 CFR 611.2 - What management plan must be included in a Teacher Quality Enhancement Grants Program application?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What management plan must be included in a Teacher... TEACHER QUALITY ENHANCEMENT GRANTS PROGRAM General Provisions § 611.2 What management plan must be... appropriate, a management plan that includes a proposed multiyear workplan. (b) At a minimum, this workplan...

Implementing an Employee Assistance Program.

Science.gov (United States)

Gam, John; And Others

1983-01-01

Describes in detail the implementation of an employee assistance program in a textile plant. Reviews the historical development, referral process, and termination guidelines of the program and contains descriptive statistics for six periods of the program's operation. (Author/JAC)

IASI instrument: technical description and measured performances

Science.gov (United States)

Hébert, Ph.; Blumstein, D.; Buil, C.; Carlier, T.; Chalon, G.; Astruc, P.; Clauss, A.; Siméoni, D.; Tournier, B.

2017-11-01

IASI is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The IASI system includes 3 instruments that will be mounted on the Metop satellite series, a data processing software integrated in the EPS (EUMETSAT Polar System) ground segment and a technical expertise centre implemented in CNES Toulouse. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The optical configuration is based on a Michelson interferometer and the interferograms are processed by an on-board digital processing subsystem, which performs the inverse Fourier transforms and the radiometric calibration. The infrared imager co-registers the IASI soundings with AVHRR imager (AVHRR is another instrument on the Metop satellite). The presentation will focus on the architectures of the instrument, the description of the implemented technologies and the measured performance of the first flight model. CNES is leading the IASI program in association with EUMETSAT. The instrument Prime is ALCATEL SPACE.

Oil and Gas R&D Programs

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This publication describes the major components of the research and development programs of the Department of Energy`s Office of Natural Gas and Petroleum Technology. These programs are commonly referred to collectively as the `Oil and Gas Program.` This document provides customers with a single source of information describing the details of the individual technology program components. This document reflects the results of a planning cycle that began in early 1996 with the development of a scenario analysis for the programs, followed by the development of the coordinated strategic plan. The technology program plans, which are the most recent products of the planning cycle, expand on the program descriptions presented in the coordinated strategic plan, and represent an initial effort to coordinate the Oil and Gas Program exploration and production programs and budgets. Each technology program plan includes a `roadmap` that summarizes the progress of the program to the present and indicates its future direction. The roadmaps describe the program drivers, vision, mission, strategies, and measures of success. Both the individual technology program plans and the strategic plan are dynamic and are intended to be updated regularly.

Forest Service programs, authorities, and relationships: A technical document supporting the 2000 USDA Forest Service RPA Assessment

Science.gov (United States)

Ervin G. Schuster; Michael A. Krebs

2003-01-01

The Forest and Rangeland Renewable Resources Planning Act (RPA) of 1974, as amended, directs the Forest Service to prepare and update a renewable resources assessment that would include "a description of Forest Service programs and responsibilities , their interrelationships, and the relationship of these programs and responsibilities to public and private...

Description of the CONTAIN input model for the Dodewaard nuclear power plant

International Nuclear Information System (INIS)

Velema, E.J.

1992-02-01

This report describes the ECN standard CONTAIN input model for the Dodewaard Nuclear Power Plant (NPP) that has been developed by ECN. This standard input model will serve as a basis for analyses of the phenomena which may occur inside the Dodewaard containment in the event of a postulated severe accident. Boundary conditions for specific containment analyses can easily be implemented in the input model. as a result ECN will be able to respond quickly on requests for analyses from the utilities of the authorities. The report also includes brief descriptions of the Dodewaard NPP and the CONTAIN computer program. (author). 7 refs.; 5 figs.; 3 tabs

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Volume 1, Summary description

International Nuclear Information System (INIS)

Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.; Groh, M.R.; Gentillon, C.D.; Gilbert, B.G.

1988-02-01

A data management system has been implemented which supports a variety of risk-related analyses and provides a repository of hardware component failure and human error probability data to the risk analyst. The Nuclear Computerized Library for Assessing Reactor Reliability, NUCLARR, is an interactive, graphically oriented system which resides on a personal computer (PC) or PC-compatible environment. An overview of the data management system, including a description of data collection, specification, data structure, and taxonomies, is presented in Volume I of this report. Programming activities, procedures for processing data, user's guide, and hard copy data manual are presented in Volumes II through V

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

Science.gov (United States)

Miller, R. D.; Anderson, L. R.

1979-01-01

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

The Development of a Post-Baccalaureate Certificate Program in Molecular Diagnostics

Science.gov (United States)

Williams, Gail S.; Brown, Judith D.; Keagle, Martha B.

2000-01-01

A post-baccalaureate certificate program in diagnostic molecular sciences was created in 1995 by the Diagnostic Genetic Sciences Program in the School of Allied Health at the University of Connecticut. The required on-campus lecture and laboratory courses include basic laboratory techniques, health care issues, cell biology, immunology, human genetics, research, management, and molecular diagnostic techniques and laboratory in molecular diagnostics. These courses precede a 6-month, full-time practicum at an affiliated full-service molecular laboratory. The practicum includes amplification and blotting methods, a research project, and a choice of specialized electives including DNA sequencing, mutagenesis, in situ hybridization methods, or molecular diagnostic applications in microbiology. Graduates of the program are immediately eligible to sit for the National Credentialing Agency examination in molecular biology to obtain the credential Clinical Laboratory Specialist in Molecular Biology (CLSp(MB). This description of the University of Connecticut program may assist other laboratory science programs in creating similar curricula. PMID:11232107

Assessment of the Accounting and Joint Accounting/Computer Information Systems Programs.

Science.gov (United States)

Appiah, John; Cernigliaro, James; Davis, Jeffrey; Gordon, Millicent; Richards, Yves; Santamaria, Fernando; Siegel, Annette; Lytle, Namy; Wharton, Patrick

This document presents City University of New York LaGuardia Community College's Department of Accounting and Managerial Studies assessment of its accounting and joint accounting/computer information systems programs report, and includes the following items: (1) description of the mission and goals of the Department of Accounting and Managerial…

CONTEMPT4/MOD2: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Metcalfe, L.J.; Mings, W.J.; Hartman, J.E.; Crail, A.C.

1978-02-01

CONTEMPT4/MOD2 is a digital computer program, written in FORTRAN IV, which describes the behavior of multicompartment pressurized water reactor (PWR) containment systems and experimental containment systems subjected to postulated loss-of-coolant accident (LOCA) conditions. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and intercompartment mass and energy exchange based on user-supplied values for compartment descriptions, time step and edit controls, and selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, fan coolers, heat conducting structures, sump drain, and PWR ice condensers. Dynamic storage allocations (DSA) is used to limit the amount of computer core used for each problem. Optional automatic time step control allows the code to determine time step sizes within limits dictated by the user. Multicompartment capability (up to 999 individual compartments) and generalized, user-oriented input data descriptions permit improved flexibility over previous codes in the CONTEMPT series. Analytical model descriptions, input instructions, and sample problem results are presented

CONTEMPT 4/MOD 3: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Cheng, T.C.; Metcalfe, L.J.; Hartman, J.E.; Mings, W.J.; Crail, A.C.

1982-12-01

CONTEMPT4/MOD3 is a digital computer program, written in FORTRAN IV, that describes the behavior of multicompartment pressurized water reactor (PWR) containment systems and experimental containment systems subjected to postulated loss-of-coolant accident (LOCA) conditons. The program calculates the time variation of compartment pressures, temperatures, mass and energy inventories, heat structure temperature distributions, and intercompartment mass and energy exchange based on user-supplied values for compartment descriptions, time step and edit controls, and selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, fan coolers, heat-conducting structures, sump drains, and PWR ice condensers. Dynamic stroage allocation (DSA) is used to limit the amount of computer core used for each problem. Optional automatic time step control allows the code to determine time step sizes within limits dictated by the user. Multicompartment capability (up to 999 individual compartments) and generalized, user-oriented input-data descriptions permit improved flexibility over previous codes in the CONTEMPT series. Analytical model descriptions, input instructions, and sample problem results are presented

Applications of QA to RandD support of HLW programs

International Nuclear Information System (INIS)

Ryder, D.E.

1988-05-01

The application of a formal QA program to any discipline or organization can be difficult to achieve and to do so with a research and development organization has special challenges that are somewhat unique. This paper describes how a QA program based upon a national consensus standard (developed for application to the design, construction and operation of nuclear facilities) has been successfully applied to some of the research and development activities in support of the High Level Waste Programs. This description includes a discussion on the importance of being creative when interpreting the QA standard, a brief overview of the QA program that was developed and the results achieved during implementation of the QA program. 4 refs., 4 figs

WHAMSE: a program for three-dimensional nonlinear structural dynamics

International Nuclear Information System (INIS)

Belytschko, T.; Tsay, C.S.

1982-02-01

WHAMSE is a computer program for the nonlinear, transient analysis of structures. The formulation includes both geometric and material nonlinearities, so problems with large displacements and elastic-plastic behavior can be treated. Explicit time integration is used, so the program is most suitable for implusive loads. Energy balance calculations are provided to check numerical stability. The mass matrix is lumped. A finite element format is used for the description of the problem geometry, so the program is quite versatile in treating complex engineering structures. The following elements are included: a triangular element for thin plates and shells, a beam element, a spring element and a rigid body. Mesh generation features are provided to simplify program input. Other features of the program are: (1) a restart capability; (2) a variety of output options, such as printer plots or CALCOMP plots of selected time histories, picture (snapshot) output, and CALCOMP plots of the undeformed and deformed structure

A national survey of school-based, adolescent suicide prevention programs.

Science.gov (United States)

Garland, A; Shaffer, D; Whittle, B

1989-11-01

A national survey of suicide prevention programs was conducted to determine the number, distribution and content of school-based, curriculum programs for adolescents. One hundred fifteen programs were identified. The total number of students and schools targeted for prevention efforts more than doubled during the academic years 1984/1985 to 1986/1987. Content of the programs was similar, with nearly all including information on suicide warning signs and other facts, as well as on accessing community mental health resources. Most included a separate component for school staff and parents. Ninety-five percent subscribed to the view that suicide is most commonly a response to extreme stress or pressure and could happen to anyone. Possible negative implications of this "stress model" of suicide were discussed. While this survey plays an important first step in providing a description of these programs, more evaluative research is needed to determine what effect, if any, these programs have on suicidal behavior.

A multifaceted rehabilitation program for women with cancer.

Science.gov (United States)

Johnson, J B; Kelly, A W

1990-01-01

A multifaceted rehabilitation program for women diagnosed with cancer includes a personal fitness plan, aerobic exercise classes, journaling, and a six-day environmental wilderness experience. The program's purpose is for participants to learn how to cope with uncertainties in life and to promote a wellness concept for living with cancer. This is achieved through successfully meeting the challenges of the program. A descriptive study, using journal entries of the pilot group's 12 women with breast cancer, provides insight into participants' views of the program. Their responses described: personal growth through succeeding at new and difficult experiences; normalization engendered by communicating with others having cancer; exhilaration at focusing on challenging events external to personal health problems; and courage that overrode their fears of facing what seemed impossible.

Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

Science.gov (United States)

Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-08-15

Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Dilemma of prescribing aripiprazole under the Taiwan health insurance program: a descriptive study

Directory of Open Access Journals (Sweden)

Hsu YC

2015-01-01

Full Text Available Yi-Chien Hsu,1,2 Yu-Ching Chou,3 Hsin-An Chang,1,2,4 Yu-Chen Kao,1,2,5 San-Yuan Huang,1,2 Nian-Sheng Tzeng1,2,4 1Department of Psychiatry, Tri-Service General Hospital, Taipei, Taiwan; 2School of Medicine, 3School of Public Health, 4Student Counseling Center, National Defense Medical Center, Taipei, Taiwan; 5Department of Psychiatry, Tri-Service General Hospital, Song-Shan Branch, Taipei, Taiwan Objectives: Refractory major depressive disorder (MDD is a serious problem leading to a heavy economic burden. Antipsychotic augmentation treatment with aripiprazole and quetiapine is approved for MDD patients and can achieve a high remission rate. This study aimed to examine how psychiatrists in Taiwan choose medications and how that choice is influenced by health insurance payments and administrative policy.Design: Descriptive study.Outcome measures: Eight questions about the choice of treatment strategy and atypical antipsychotics, and the reason to choose aripiprazole.Intervention: We designed an augmentation strategy questionnaire for psychiatrists whose patients had a poor response to antidepressants, and handed it out during the annual meeting of the Taiwanese Society of Psychiatry in October 2012. It included eight questions addressing the choice of treatment strategy and atypical antipsychotics, and the reason whether or not to choose aripiprazole as the augmentation antipsychotic.Results: Choosing antipsychotic augmentation therapy or switching to other antidepressant strategies for MDD patients with an inadequate response to antidepressants was common with a similar probability (76.1% vs 76.4%. The most frequently used antipsychotics were aripiprazole and quetiapine, however a substantial number of psychiatrists chose olanzapine, risperidone, and sulpiride. The major reason for not choosing aripiprazole was cost (52.1%, followed by insurance official policy audit and deletion in the claims review system (30.1%.Conclusion: The prescribing

Converting Taxonomic Descriptions to New Digital Formats

Directory of Open Access Journals (Sweden)

Hong Cui

2008-01-01

Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

Addressing the Language Description Deficit

Directory of Open Access Journals (Sweden)

M. Ali Bolgiin

2010-01-01

Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

An Approach to Object Recognition: Aligning Pictorial Descriptions.

Science.gov (United States)

1986-12-01

PERFORMING 0RGANIZATION NAMIE ANDORS IS551. PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREKA A WORK UNIT NUMBERS ( 545 Technology... ARTIFICIAL INTELLIGENCE LABORATORY A.I. Memo No. 931 December, 1986 AN APPROACH TO OBJECT RECOGNITION: ALIGNING PICTORIAL DESCRIPTIONS Shimon Ullman...within the Artificial Intelligence Laboratory at the Massachusetts Institute of Technology. Support for the A.I. Laboratory’s artificial intelligence

Emended description of Pasteuria nishizawae.

Science.gov (United States)

Noel, Gregory R; Atibalentja, N; Domier, Leslie L

2005-07-01

The description of the Gram-positive, obligately parasitic, mycelial and endospore-forming bacterium, Pasteuria nishizawae, is emended to include additional observations on the life cycle, host specificity and endospore morphology. The nucleotide sequence of the 16S rRNA gene is also provided.

PCX, Interior-Point Linear Programming Solver

International Nuclear Information System (INIS)

Czyzyk, J.

2004-01-01

1 - Description of program or function: PCX solves linear programming problems using the Mehrota predictor-corrector interior-point algorithm. PCX can be called as a subroutine or used in stand-alone mode, with data supplied from an MPS file. The software incorporates modules that can be used separately from the linear programming solver, including a pre-solve routine and data structure definitions. 2 - Methods: The Mehrota predictor-corrector method is a primal-dual interior-point method for linear programming. The starting point is determined from a modified least squares heuristic. Linear systems of equations are solved at each interior-point iteration via a sparse Cholesky algorithm native to the code. A pre-solver is incorporated in the code to eliminate inefficiencies in the user's formulation of the problem. 3 - Restriction on the complexity of the problem: There are no size limitations built into the program. The size of problem solved is limited by RAM and swap space on the user's computer

Training the Workforce: Description of a Longitudinal Interdisciplinary Education and Mentoring Program in Palliative Care.

Science.gov (United States)

Levine, Stacie; O'Mahony, Sean; Baron, Aliza; Ansari, Aziz; Deamant, Catherine; Frader, Joel; Leyva, Ileana; Marschke, Michael; Preodor, Michael

2017-04-01

The rapid increase in demand for palliative care (PC) services has led to concerns regarding workforce shortages and threats to the resiliency of PC teams. To describe the development, implementation, and evaluation of a regional interdisciplinary training program in PC. Thirty nurse and physician fellows representing 22 health systems across the Chicago region participated in a two-year PC training program. The curriculum was delivered through multiple conferences, self-directed e-learning, and individualized mentoring by expert local faculty (mentors). Fellows shadowed mentors' clinical practices and received guidance on designing, implementing, and evaluating a practice improvement project to address gaps in PC at their institutions. Enduring, interdisciplinary relationships were built at all levels across health care organizations. Fellows made significant increases in knowledge and self-reported confidence in adult and pediatric PC and program development skills and frequency performing these skills. Fellows and mentors reported high satisfaction with the educational program. This interdisciplinary PC training model addressed local workforce issues by increasing the number of clinicians capable of providing PC. Unique features include individualized longitudinal mentoring, interdisciplinary education, on-site project implementation, and local network building. Future research will address the impact of the addition of social work and chaplain trainees to the program. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Academic dishonesty among nursing students: a descriptive study.

Science.gov (United States)

Keçeci, Ayla; Bulduk, Serap; Oruç, Deniz; Çelik, Serpil

2011-09-01

This descriptive and cross-sectional study aims to evaluate academic dishonesty among university nursing students in Turkey. The study's sample included 196 students. Two instruments were used for gathering data. The first instrument, a questionnaire, which included some socio-demographic variables (age, class, gender, education, family structure, parents' attitude and educators' attitude) formed the first part. The second part included the Academic Dishonesty Tendency Scale developed by Eminoğlu and Nartgün. The data were analyzed using descriptive statistics and Kruskall Wallis, One-way Anova, t- test and Mann-Whitney U test. It was found that academic dishonesty was at medium-level (2.60-3.39) in nursing students.

Proceedings of the second Department Of Energy Defense Programs waste reduction workshop

International Nuclear Information System (INIS)

1989-04-01

The second waste reduction workshop was held at the Rocky Flats Plant (RFP). The objective of this workshop was to exchange specific information (successes and failures) on education and training programs for waste reduction. Each facility was asked to provide a description of their programs to include information on formal, informal, and planned employee training programs; employee incentive programs; pamphlets, posters, books, magazines, communications, and publicity; procurement control and awareness in minimizing hazardous materials; housekeeping successes; waste minimization surveys; and implementation successes and failures. This document contains copies of the demonstrations and not the text of the presentations

Multichannel analyzer and spectrum evaluation program for a PDP-8/I computer

International Nuclear Information System (INIS)

German, U.

1976-01-01

The present report is intended to give descriptions of program functions and performances for a small computer used as multichannel analyzer; this has the advantage of flexibility and simple alteration of program parts for various experiments. To the common part of data acquisition and handling was added a calculation section which enables spectrum analysis; peaks are identified and their characteristics are printed, greatly simplifying the work of the analyst. Parameters for the detection efficiency curve are included in the program and thus absolute gamma-ray measurement can be performed on-line. The operation and use of the program are explained. (B.G.)

Site study plan for ecology, Deaf Smith County Site, Texas: Environmental Field Program: Preliminary Draft

International Nuclear Information System (INIS)

1987-06-01

The Ecology Site Study Plan describes a field program consisting of studies which include surveys for endangered, threatened, and candidate species; vegetation characterization, including mapping and cover typing, plant succession, wetlands description, and preexisting stresses; and wildlife community characterization, including availability and quality of habitats and descriptions of mammal, bird, reptile, amphibian, and invertebrate populations. The plan for each study describes the need for the study, study design, data management and use, schedule and personnel requirements, and quality assurance. These studies will provide data needed to satisfy requirements contained in, or derived from, the Salt Repository Project Requirements Document (SRP-RD). 83 refs., 3 tabs

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program.

Simulation Use in Paramedic Education Research (SUPER): A Descriptive Study.

Science.gov (United States)

McKenna, Kim D; Carhart, Elliot; Bercher, Daniel; Spain, Andrew; Todaro, John; Freel, Joann

2015-01-01

The purpose of this research was to characterize the use of simulation in initial paramedic education programs in order assist stakeholders' efforts to target educational initiatives and resources. This group sought to provide a snapshot of what simulation resources programs have or have access to and how they are used; faculty perceptions about simulation; whether program characteristics, resources, or faculty training influence simulation use; and if simulation resources are uniform for patients of all ages. This was a cross-sectional census survey of paramedic programs that were accredited or had a Letter of Review from the Committee on Accreditation of Educational Programs for the EMS Professions at the time of the study. The data were analyzed using descriptive statistics and chi-square analyses. Of the 638 surveys sent, 389 valid responses (61%) were analyzed. Paramedic programs reported they have or have access to a wide range of simulation resources (task trainers [100%], simple manikins [100%], intermediate manikins [99%], advanced/fully programmable manikins [91%], live simulated patients [83%], computer-based [71%], and virtual reality [19%]); however, they do not consistently use them, particularly advanced (71%), live simulated patients (66%), computer-based (games, scenarios) (31%), and virtual reality (4%). Simulation equipment (of any type) reportedly sits idle and unused in (31%) of programs. Lack of training was cited as the most common reason. Personnel support specific to simulation was available in 44% of programs. Programs reported using simulation to replace skills more frequently than to replace field or clinical hours. Simulation goals included assessment, critical thinking, and problem-solving most frequently, and patient and crew safety least often. Programs using advanced manikins report manufacturers as their primary means of training (87%) and that 19% of faculty had no training specific to those manikins. Many (78%) respondents felt

Experiences of Students with Specific Learning Disorder (Including ADHD) in Online College Degree Programs: A Phenomenological Study

Science.gov (United States)

Bunch, Seleta LeAnn

2016-01-01

Enrollment in online degree programs is rapidly expanding due to the convenience and affordability offered to students and improvements in technology. The purpose of this hermeneutical phenomenological study was to understand the shared experiences of students with documented specific learning disorders (including Attention-Deficit/Hyperactivity…

45 CFR 287.130 - Can NEW Program activities include job market assessments, job creation and economic development...

Science.gov (United States)

2010-10-01

... assessments, job creation and economic development activities? 287.130 Section 287.130 Public Welfare... creation and economic development activities? (a) A Tribe may conduct job market assessments within its NEW Program. These might include the following: (1) Consultation with the Tribe's economic development staff...

Short-term Evaluation of a Comprehensive Education Program Including Inhaler Training and Disease Management on Chronic Obstructive Pulmonary Disease.

Science.gov (United States)

Yoo, Kwang Ha; Chung, Wou Young; Park, Joo Hun; Hwang, Sung Chul; Kim, Tae Eun; Oh, Min Jung; Kang, Dae Ryong; Rhee, Chin Kook; Yoon, Hyoung Kyu; Kim, Tae Hyung; Kim, Deog Kyeom; Park, Yong Bum; Kim, Sang Ha; Yum, Ho Kee

2017-10-01

Proper education regarding inhaler usage and optimal management of chronic obstructive pulmonary disease (COPD) is essential for effectively treating patients with COPD. This study was conducted to evaluate the effects of a comprehensive education program including inhaler training and COPD management. We enlisted 127 patients with COPD on an outpatient basis at 43 private clinics in Korea. The patients were educated on inhaler usage and disease management for three visits across 2 weeks. Physicians and patients were administered a COPD assessment test (CAT) and questionnaires about the correct usage of inhalers and management of COPD before commencement of this program and after their third visit. The outcomes of 127 COPD patients were analyzed. CAT scores (19.6±12.5 vs. 15.1±12.3) improved significantly after this program (pmanagement and the correct technique for using inhalers than those who did not have improved CAT scores (peducation program including inhaler training and COPD management at a primary care setting improved CAT scores and led to patients' better understanding of COPD management. Copyright©2017. The Korean Academy of Tuberculosis and Respiratory Diseases

Description of work for routine groundwater sampling at the Environmental Restoration Disposal Facility

International Nuclear Information System (INIS)

Ford, B.H.

1996-09-01

This document provides a description of work and field implementation guidance for routine (post-baseline) groundwater monitoring sampling program at the Environmental Restoration Disposal Facility. The purpose of this program is to (1) meet the intent of the applicable or relevant and appropriate requirements; (2) document baseline groundwater conditions; (3) monitor those conditions for change; and (4) allow for modifications to groundwater sampling if required by the leachate management program

A Descriptive, Cross-sectional Survey of Turkish Nurses' Knowledge of Pressure Ulcer Risk, Prevention, and Staging.

Science.gov (United States)

Gul, Asiye; Andsoy, Isil Isik; Ozkaya, Birgul; Zeydan, Ayten

2017-06-01

Nurses' knowledge of pressure ulcer (PU) prevention and management is an important first step in the provision of optimal care. To evaluate PU prevention/risk, staging, and wound description knowledge, a descriptive, cross-sectional survey was conducted among nurses working in an acute care Turkish hospital. The survey instrument was a modified and translated version of the Pieper Pressure Ulcer Knowledge Test (PUKT), and its validity and reliability were established. Nurses completed a Personal Characteristics Form, including sociodemographic information and exposure to educational presentations and information about and experience with PUs, followed by the 49-item modified PUKT which includes 33 prevention/risk items, 9 staging items, and 7 wound description items. All items are true/false questions with an I don't know option (scoring: minimum 0, maximum 49). Correct answers received 1 point and incorrect/unknown answers received 0 points. The paper-pencil questionnaires were distributed by 2 researchers to all nurses in the participating hospital and completed by those willing to be included. Responses were analyzed using descriptive statistics. Pearson's correlation test was used to examine the relationship between quantitative variables, and mean scores were compared using the Mann-Whitney U and Kruskal-Wallis tests. Among the 308 participating nurses (mean age 29.5 ± 8.1 [range 19-56] years) most were women (257, 83.4%) with 7.3 ± 7.8 (range 1-36) years of experience. The mean knowledge score for the entire sample was 29.7 ± 6.7 (range 8-42). The overall percentage of correct answers was 60.6% to 61.8% for PU prevention/risk assessment, 60% for wound description, and 56.6% for PU staging. Knowledge scores were significantly (P pressure on the heels" (22, 7.1%). The results of this study suggest education and experience caring for patients who are at risk for or have a PU affect nurses' knowledge. This study, and additional research examining nurse

RSYST - a short description of the modules

International Nuclear Information System (INIS)

Ruehle, R.

1976-04-01

The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

The Colombian conflict: a description of a mental health program in the Department of Tolima

Directory of Open Access Journals (Sweden)

Grais Rebecca F

2009-12-01

Full Text Available Abstract Colombia has been seriously affected by an internal armed conflict for more than 40 years affecting mainly the civilian population, who is forced to displace, suffers kidnapping, extortion, threats and assassinations. Between 2005 and 2008, Médecins Sans Frontières-France provided psychological care and treatment in the region of Tolima, a strategic place in the armed conflict. The mental health program was based on a short-term multi-faceted treatment developed according to the psychological and psychosomatic needs of the population. Here we describe the population attending during 2005-2008, in both urban and rural settings, as well as the psychological treatment provided during this period and its outcomes. We observed differences between the urban and rural settings in the traumatic events reported, the clinical expression of the disorders, the disorders diagnosed, and their severity. Although the duration of the treatment was limited due to security reasons and access difficulties, patient condition at last visit improved in most of the patients. These descriptive results suggest that further studies should be conducted to examine the role of short-term psychotherapy, adapted specifically to the context, can be a useful tool to provide psychological care to population affected by an armed conflict.

Employee assistance programs in the new millennium.

Science.gov (United States)

Masi, Dale A

2005-01-01

This article presents an overall view of Employee Assistance Programs (EAPs). Beginning with the history, this article describes various models and essential ingredients of EAPs. It then discusses current trends including integration with Work/Life, web-based services, EAP accreditation, and the growth of international programs. Several issues are discussed including the need for licensing done nationally rather than by states and the effect the lack of substance abuse and brief counseling education has had on the delivery of EAP services. Future directions for EAPs emphasize the importance of quality assurance and the development of performance measurements, performance guarantees, and outcome measurements. The formation of the Alliance for Employee Assistance Advancement, an organization of organizations, completes the description and shows a new direction for EAPs in the next millennium.

Peer tutoring programs in health professions schools.

Science.gov (United States)

Santee, Jennifer; Garavalia, Linda

2006-06-15

Peer tutoring programs may be one method of maintaining quality of pharmacy education in the face of growing student enrollment and a small faculty body. A critical review of the literature was performed to ascertain whether peer tutoring programs improve or maintain the academic performance of health care professional students. Various electronic databases and abstracts from past American Association of Colleges of Pharmacy's annual meetings were searched to identify pertinent research. Only those articles with quantitative data, an experimental design, and comparative statistical analysis were included for review. Most studies found that peer tutoring had a positive impact on academic performance. These results may not be readily generalizable as there were numerous methodological flaws and limited descriptions of the programs and participants. Studies with better designs and more detail are needed to answer definitively whether peer tutoring is of benefit. Details of what resources were required should be included in the study to allow the reader to determine the feasibility of the intervention.

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

Brine: a computer program to compute brine migration adjacent to a nuclear waste canister in a salt repository

International Nuclear Information System (INIS)

Duckworth, G.D.; Fuller, M.E.

1980-01-01

This report presents a mathematical model used to predict brine migration toward a nuclear waste canister in a bedded salt repository. The mathematical model is implemented in a computer program called BRINE. The program is written in FORTRAN and executes in the batch mode on a CDC 7600. A description of the program input requirements and output available is included. Samples of input and output are given

Mississippi Curriculum Framework for Banking & Finance Technology (Program CIP: 52.0803--Banking and Related Financial Programs, Other). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the banking and finance technology program. Presented in the introduction are a program description and suggested course sequence. Section I is a curriculum guide consisting of outlines for…

DITTY - a computer program for calculating population dose integrated over ten thousand years

International Nuclear Information System (INIS)

Napier, B.A.; Peloquin, R.A.; Strenge, D.L.

1986-03-01

The computer program DITTY (Dose Integrated Over Ten Thousand Years) was developed to determine the collective dose from long term nuclear waste disposal sites resulting from the ground-water pathways. DITTY estimates the time integral of collective dose over a ten-thousand-year period for time-variant radionuclide releases to surface waters, wells, or the atmosphere. This document includes the following information on DITTY: a description of the mathematical models, program designs, data file requirements, input preparation, output interpretations, sample problems, and program-generated diagnostic messages

NACHOS: a finite element computer program for incompressible flow problems. Part I. Theoretical background

International Nuclear Information System (INIS)

Gartling, D.K.

1978-04-01

The theoretical background for the finite element computer program, NACHOS, is presented in detail. The NACHOS code is designed for the two-dimensional analysis of viscous incompressible fluid flows, including the effects of heat transfer. A general description of the fluid/thermal boundary value problems treated by the program is described. The finite element method and the associated numerical methods used in the NACHOS code are also presented. Instructions for use of the program are documented in SAND77-1334

Resource Programs : Draft Environmental Impact Statement, Volume 2, Appendices.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1992-03-01

Every two years, Bonneville Power Administration (BPA) prepares a Resource Program which identifies the resource actions BPA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Program`s Environmental Impact Statement (RPEIS) is a programmatic environmental document which will support decisions made in several future Resource Programs. Environmental documents tiered to the EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. This report contains the appendices to the RPEIS.

Testing the methodology for site descriptive modelling. Application for the Laxemar area

Energy Technology Data Exchange (ETDEWEB)

Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

2002-08-01

A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

Implementation and evaluation of a training program as part of the Cooperative Biological Engagement Program in Azerbaijan

Directory of Open Access Journals (Sweden)

April eJohnson

2015-10-01

Full Text Available A training program for animal and human health professionals has been implemented in Azerbaijan through a joint agreement between the United States Defense Threat Reduction Agency and the Government of Azerbaijan. The training program is administered as part of the Cooperative Biological Engagement Program, and targets key employees in Azerbaijan’s disease surveillance system including physicians, veterinarians, epidemiologists, and laboratory personnel. Training is aimed at improving detection, diagnosis, and response to especially dangerous pathogens, although the techniques and methodologies can be applied to other pathogens and diseases of concern. Biosafety and biosecurity training is provided to all trainees within the program. Prior to 2014, a variety of international agencies and organizations provided training, which resulted in gaps related to lack of coordination of training materials and content. In 2014 a new training program was implemented in order to address those gaps. This paper provides an overview of the Cooperative Biological Engagement Program training program in Azerbaijan, a description of how the program fits into existing national training infrastructure, and an evaluation of the new program’s effectiveness to date. Long-term sustainability of the program is also discussed.

Development of the disposal technology research component of the national uranium tailings program

International Nuclear Information System (INIS)

Melis, L.A.

1983-03-01

The National Technical Planning Group on Uranium Tailings Research, organized by CANMET in 1980, recommended the establishment of a National Uranium Tailings Program to develop research on the long-term abandonment of uranium mine tailings. This report deals with the disposal technology component of this program and attempts to provide recommendations with respect to potential research avenues in this area. A description of uranium tailings in Canada is provided in order to identify the current situation with uranium tailings management. Uranium mining sites described include the Elliot Lake and Bancroft area of Ontario, the northern Saskatchewan properties and the two abandoned sites in the North West Territories. The description of the sites was facilitated by subdividing the tailings into inactive sites, active sites, new tailings sites and areas of tailings in a close-out situation. Methods identified as promising include subsurface disposal, in-situ leaching, prevention of pyrite oxidation and reclamation studies at abandoned sites

Hanford Site grundwater protection management program

International Nuclear Information System (INIS)

1989-10-01

Groundwater protection has emerged over the past few years as a national priority that has been promulgated in a variety of environmental regulations at both the state and federal level. In order to effectively coordinate and ensure compliance with applicable regulations, the US Department of Energy (DOE) requires all DOE facilities to prepare separate groundwater protection program descriptions and plans (groundwater activities were formerly included as a subpart of environmental protection programs). This document is for the Hanford Site located in the state of Washington. The DOE Order specifies that the groundwater protection management program cover the following general topical areas: (1) documentation of the groundwater regime, (2) design and implementation of a groundwater monitoring program to support resource management and comply with applicable laws and regulations, (3) a management program for groundwater protection and remediation, (4) a summary and identification of areas that may be contaminated with hazardous waste, (5) strategies for controlling these sources, (6) a remedial action program, and (7) decontamination and decommissioning and related remedial action requirements. 14 refs., 19 figs., 2 tabs

Status of the NASA Balloon Program

Science.gov (United States)

Needleman, H. C.; Nock, R. S.; Bawcom, D. W.

1993-02-01

In the early 1980's the U.S. National Aeronautics and Space Administration (NASA) Balloon Program was faced with a problem of catastrophic balloon failures. In 1986 a balloon recovery program was initiated. This program included qualification of new balloon films, and investigations into materials, processing, structures and performance of balloons. This recovery program has been very successful. To date, more than 100 balloons manufactured of newly developed films have been flown with unprecedented success. There has been much progress made across the spectrum of balloon related disciplines. A new design philosophy has been developed and is being used for all NASA balloons. An updated balloon reliability and quality assurance program is in effect. The long duration balloon development project has been initiated with the first flight test having been conducted in December 1989 from Antarctica. A comprehensive research and development (R&D) effort has been initiated and is progressing well. The progress, status and future plans for these and other aspects of the NASA program, along with a description of the comprehensive balloon R&D activity, will be presented.

HIGHWAY, a transportation routing model: program description and users' manual

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.; Gibson, S.M.

1982-12-01

A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire interstate highway system, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of interstate highways or routes that will bypass urbanized areas containing populations > 100,000. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

An Update on the NASA Planetary Science Division Research and Analysis Program

Science.gov (United States)

Richey, Christina; Bernstein, Max; Rall, Jonathan

2015-01-01

Introduction: NASA's Planetary Science Division (PSD) solicits its Research and Analysis (R&A) programs each year in Research Opportunities in Space and Earth Sciences (ROSES). Beginning with the 2014 ROSES solicitation, PSD will be changing the structure of the program elements under which the majority of planetary science R&A is done. Major changes include the creation of five core research program elements aligned with PSD's strategic science questions, the introduction of several new R&A opportunities, new submission requirements, and a new timeline for proposal submissionROSES and NSPIRES: ROSES contains the research announcements for all of SMD. Submission of ROSES proposals is done electronically via NSPIRES: http://nspires.nasaprs.com. We will present further details on the proposal submission process to help guide younger scientists. Statistical trends, including the average award size within the PSD programs, selections rates, and lessons learned, will be presented. Information on new programs will also be presented, if available.Review Process and Volunteering: The SARA website (http://sara.nasa.gov) contains information on all ROSES solicitations. There is an email address (SARA@nasa.gov) for inquiries and an area for volunteer reviewers to sign up. The peer review process is based on Scientific/Technical Merit, Relevance, and Level of Effort, and will be detailed within this presentation.ROSES 2014 submission changes: All PSD programs will use a two-step proposal submission process. A Step-1 proposal is required and must be submitted electronically by the Step-1 due date. The Step-1 proposal should include a description of the science goals and objectives to be addressed by the proposal, a brief description of the methodology to be used to address the science goals and objectives, and the relevance of the proposed research to the call submitted to.Additional Information: Additional details will be provided on the Cassini Data Analysis Program, the

Computer-based programs on acquisition of reading skills in schoolchildren (review of contemporary foreign investigations

Directory of Open Access Journals (Sweden)

Prikhoda N.A.

2015-03-01

Full Text Available The article presents a description of 17 computer-based programs, which were used over the last 5 years (2008—2013 in 15 studies of computer-assisted reading instruction and intervention of schoolchildren. The article includes a description of specificity of various terms used in the above-mentioned studies and the contents of training sessions. The article also carries out a brief analysis of main characteristics of computer-based techniques — language of instruction, age and basic characteristics of students, duration and frequency of training sessions, dependent variables of education. Special attention is paid to efficiency of acquisition of different reading skills through computer-based programs in comparison to traditional school instruction.

Palliative sedation for cancer patients included in a home care program: a retrospective study.

Science.gov (United States)

Calvo-Espinos, Claudio; Ruiz de Gaona, Estefania; Gonzalez, Cristina; Ruiz de Galarreta, Lucia; Lopez, Cristina

2015-06-01

Palliative sedation is a common treatment in palliative care. The home is a difficult environment for research, and there are few studies about sedation at home. Our aim was to analyze this practice in a home setting. We conducted a retrospective cross-sectional descriptive study in a home cohort during 2011. The inclusion criteria were as follows: 18 years or older and enrolled in the Palliative Home Care Program (PHCP) with advanced cancer. The variables employed were: sex, age, primary tumor location, and place of death. We also registered indication, type, drug and dose, awareness of diagnosis and prognosis, consent, survival, presence or absence of rales, painful mouth, and ulcers in patients sedated at home. We also collected the opinions of family members and professionals about the suffering of sedated patients. A total of 446 patients (56% at home) of the 617 admitted to the PHCP between January and December of 2011 passed away. The typical patient in our population was a 70-year-old man with a lung tumor. Some 35 (14%) home patients required sedation, compared to 93 (49%) at the hospital. The most frequent indication was delirium (70%), with midazolam the most common drug (mean dose, 40 mg). Survival was around three days. Rales were frequent (57%) as well as awareness of diagnosis and prognosis (77 and 71%, respectively). Perception of suffering after sedation was rare among relatives (17%) and professionals (8%). In most cases, the decision was made jointly by professionals and family members. Our study confirmed the role of palliative sedation as an appropriate therapeutic tool in the home environment.

A Playful Programming Products Vs. Programming Concepts Matrix

DEFF Research Database (Denmark)

Allsopp, Benjamin Brink

2017-01-01

to computer program: playful programming. This research also describes a project to bring together different stakeholders (developers, educators, parents and researchers) with a common vocabulary for describing, developing, teaching with and comparing these playful programming products and develops a model......A number of Danish primary schools are involved in pilot studies where 1st to 9th grade students work with Scratch and Lego MindStorms in STEM subjects. These games may become part of the curriculum at these schools. Recent research identifies a category of games and toys that support learning...... to provide educators and researchers involved in pilot studies with an overview of which programming concepts various playful programming products exercise (a playful programming products vs. programming concepts matrix). We also add additional concept specializations and expand on the descriptions...

CONTEMPT4/MOD6: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Lin, C.C.; Economos, C.; Lehner, J.R.; Maise, G.

1986-03-01

CONTEMPT4/MOD6 is a digital computer program that describes the response of multicompartment containment system subjected to postulated loss-of-coolant accident (LOCA) conditions. The program is written in FORTRAN IV and can accomodate both pressurized water reactor (PWR) and boiling water reactor (BWR) containment systems. Also, both design basis accident (DBA) and degraded core type LOCA conditions can be analyzed. The program calculates the time variation of compartment pressures, temperatures and mass and energy inventories due to intercompartment mass and energy exchange taking into account user supplied descriptions of compartments, intercompartment junction flow areas, LOCA source terms and user selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, heat conducting structures, sump drains, PWR ice condensers and BWR pressure suppression systems. To accommodate degraded core type accidents, analytical models for hydrogen and carbon monoxide combustion within compartments and energy transfer due to gas radiation are also provided. Dynamic storage allocation (DSA) is used to limit the amount of computer core used for each problem. The flexibility needed to more realistically model the complexity of prototypical containments is provided by the multicompartment capability (up to 999 individual compartments) and generalized user oriented input data descriptions. The program employs an implicit algorithm to compute junction flow when numerically induced flow oscillations are encountered. This capability provides significant reduction of computer run time relative to previous codes in the CONTEMPT series. Descriptions of these analytical models are presented, together with input instructions for the CONTEMPT4/MOD6 program and sample problem results. 23 refs., 62 figs

Evaluasi Program-program Pengentasan Kemiskinan di Provinsi Bali

Directory of Open Access Journals (Sweden)

AAIN Marhaeni

2014-07-01

Full Text Available The success of the development carried out by a country, including Indonesia, one of which can be seen from the number of poor people. The results of the development carried out by both the local government and the central government still leaving the poverty in most of the existing population. The number of poor people in the Province of Bali, both in absolute and in the percentage is fluctuating, even  absolutely, the number of  poor people in 2011 was much more than in 2009 (183.1 thousand versus 173.6 thousand of people. It is essential to evaluate the government programs to be in accordance with the Act Number 25 Year 2004 on National Development Planning System which mandates the control and evaluation of the implementation of development plans and to be in accordance with the Government Regulation. 39 of 2006, concerning the monitoring. Seeing the importance of activities to perform the evaluation or monitoring, the study aims: 1 to determine the effectiveness of poverty eradication programs that have been implemented by the government so far, which is reducing the expenditure of the poor people, which involving inputs, processes and outputs;2 To analyze the constraints faced by the implementers in the implementation of poverty eradication programs that are reducing the expenditure of the poor; 3 To assess the benefits perceived by the recipients of the program, during receiving aids in the areas of education, health, and food sector; 4 to analyze the weaknesses that exist in the various poverty eradication programs that have been implemented by the government; 5 to assess the commitment of the program implementers in implementing poverty eradication programs in accordance with the community expectations. The research was conducted in three regencies, namely Buleleng, Badung, and Klungkung and each consisted of as many as 90 persons including the recipients of poverty eradication programs in the fields of education, health, and, food

Fusion Energy Sciences Program at LANL

Energy Technology Data Exchange (ETDEWEB)

Leeper, Ramon J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-15

This presentation provides a strategic plan and description of investment areas; LANL vision for existing programs; FES portfolio and other specifics related to the Fusion Energy Sciences program at LANL.

Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies report. Volume 3: Computer program listings

Science.gov (United States)

1979-01-01

A description and listing is presented of two computer programs: Hybrid Vehicle Design Program (HYVELD) and Hybrid Vehicle Simulation Program (HYVEC). Both of the programs are modifications and extensions of similar programs developed as part of the Electric and Hybrid Vehicle System Research and Development Project.

49 CFR 659.19 - System safety program plan: contents.

Science.gov (United States)

2010-10-01

... implementation of the system safety program. (j) A description of the process used by the rail transit agency to... the rail transit agency to manage safety issues. (d) The process used to control changes to the system... hazard management program. (n) A description of the process used for facilities and equipment safety...

Programs and Expertise

CERN Document Server

2001-01-01

Description of programs and expertise implemented by Radiation Protection Centre is presented. RPC implements study assessing the doses received by air crew members of Lithuanian Airlines. In 2001 RPC started measurements of indoor radon concentrations in the houses of regions with karst formations, commenced new program analyzing amounts of radionuclides in typical diet of hospital patients.

Evaluation of an online continuing education program from the perspective of new graduate nurses.

Science.gov (United States)

Karaman, Selcuk; Kucuk, Sevda; Aydemir, Melike

2014-05-01

The aim of this study is to evaluate the online continuing education program from the perspectives of new graduate nurses. An evaluation framework includes five factors (program and course structure, course materials, technology, support services and assessment). In this study, descriptive research methods were used. Participants of the study included 2.365 registered nurses enrolled in the first online nursing bachelor completion degree program in the country. Data were collected by survey. The findings indicated that students were mostly satisfied with this program. The results of this study suggest that well designed asynchronous online education methods can be effective and appropriate for registered nurses. However, the provision of effective support and technological infrastructure is as vital as the quality of teaching for online learners. © 2013.

E-learning programs in oncology

DEFF Research Database (Denmark)

Degerfält, Jan; Sjöstedt, Staffan; Fransson, Per

2017-01-01

BACKGROUND: E-learning is an established concept in oncological education and training. However, there seems to be a scarcity of long-term assessments of E-learning programs in oncology vis-á-vis their structural management and didactic value. This study presents descriptive, nationwide data from...... 2005 to 2014. E-learning oncology programs in chemotherapy, general oncology, pain management, palliative care, psycho-social-oncology, and radiotherapy, were reviewed from our databases. Questionnaires of self-perceived didactic value of the programs were examined 2008-2014. RESULTS: The total number.......6% (MDs: 64.9%; RNs: 66.8%; SHCAs: 77.7%) and as good by 30.6% (MDs: 34.5%; RNs: 32.4%; SHCAs: 21.5%) of the responders. CONCLUSIONS: This descriptive study, performed in a lengthy timeframe, presents high-volume data from multi-professional, oncological E-learning programs. While the E-learning paradigm...

General program for the advancement of the radionuclide technology

International Nuclear Information System (INIS)

1979-12-01

The 'General Program for the Advancement of the Radionuclide Technology' was elaborated in 1978 by the 'Arbeitsgemeinschaft zur Foerderung der Radionuklidtechnik' (AFR) (Association for the Promotion of Radionuclide Technology). In addition to an inventory of the major applications of radionuclide technology, this General Program includes a comprehensive description of tasks relating to the central topics of raw materials, environment, technology and materials, health and nutrition, scientific developments of radionuclide technology. The 'General Program for the Advancement of the Radionuclide Technology' serves inter alia as a basis of evaluation in opinions on funding applications filed with the Federal Ministry for Research and Technology (BMFT) with respect to the provision of advanced techniques involving radionuclides for industrial application. (orig.) [de

Program description of FIBRAM: a radiation attenuation model for optical fibers

International Nuclear Information System (INIS)

Ingram, W.J.

1987-06-01

The report describes a fiber optics system model and its computer implementation. This implementation can calculate the bit error ratio (BER) versus time for optical fibers that have been exposed to gamma radiation. The program is designed so that the user may arbitrarily change any or all of the system input variables and produce separate output calculations. The primary output of the program is a table of the BER as a function of time. This table may be stored on magnetic media and later incorporated into computer graphics programs

Operator programs and operator processes

NARCIS (Netherlands)

Bergstra, J.A.; Walters, P.

2003-01-01

We define a notion of program which is not a computer program but an operator program: a detailed description of actions performed and decisions taken by a human operator (computer user) performing a task to achieve a goal in a simple setting consisting of that user, one or more computers and a

Documentation for Grants Equal to Tax model: Volume 1, Technical description

International Nuclear Information System (INIS)

1986-01-01

A computerized model, the Grants Equal to Tax (GETT) model, was developed to assist in evaluating the amount of federal grant monies that would go to state and local jurisdictions under the provisions outlined in the Nuclear Waste Policy Act of 1982. The GETT model is capable of forecasting the amount of tax liability associated with all property owned and all activities undertaken by the US Department of Energy (DOE) in site characterization and repository development. The GETT program is a user-friendly, menu-driven model developed using dBASE III/trademark/, a relational data base management system. The data base for GETT consists primarily of eight separate dBASE III/trademark/ files corresponding to each of the eight taxes levied by state and local jurisdictions on business property and activity. Additional smaller files help to control model inputs and reporting options. Volume 1 of the GETT model documentation is a technical description of the program and its capabilities providing (1) descriptions of the data management system and its procedures; (2) formulas for calculating taxes (illustrated with flow charts); (3) descriptions of tax data base variables for the Deaf Smith County, Texas, Richton Dome, Mississippi, and Davis Canyon, Utah, salt sites; and (4) data inputs for the GETT model. 10 refs., 18 figs., 3 tabs

DOE In Situ Remediation Integrated Program

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1993-01-01

The In Situ Remediation Integrated Program (ISRP) supports and manages a balanced portfolio of applied research and development activities in support of DOE environmental restoration and waste management needs. ISRP technologies are being developed in four areas: containment, chemical and physical treatment, in situ bioremediation, and in situ manipulation (including electrokinetics). the focus of containment is to provide mechanisms to stop contaminant migration through the subsurface. In situ bioremediation and chemical and physical treatment both aim to destroy or eliminate contaminants in groundwater and soils. In situ manipulation (ISM) provides mechanisms to access contaminants or introduce treatment agents into the soil, and includes other technologies necessary to support the implementation of ISR methods. Descriptions of each major program area are provided to set the technical context of the ISM subprogram. Typical ISM needs for major areas of in situ remediation research and development are identified

The application of the SXF lattice description and the UAL software environment to the analysis of the LHC

CERN Document Server

Fischer, W; Ptitsyn, V I

1999-01-01

A software environment for accelerator modeling has been developed which includes the UAL (Unified Accelerator Library), a collection of accelerator physics libraries with a Perl interface for scripting, and the SXF (Standard eX-change Format), a format for accelerator description which extends the MAD sequence by including deviations from design values. SXF interfaces have been written for several programs, including MAD9 and MAD8 via the doom database, Cosy, TevLat and UAL itself, which includes Teapot++. After an overview of the software we describe the application of the tools to the analysis of the LHC lattice stability, in the presence of alignment and coupling errors, and to the correction of the first turn and closed orbit in the machine. (7 refs).

SAP3PR: a FORTRAN program for calculating equivalent nodal loads resulting from pressure on the faces of 8- to 20-node isoparametric elements

International Nuclear Information System (INIS)

Fanning, D.N.

1978-04-01

A computer program is described for calculating the equivalent nodal loads resulting from distributed loads on a three-dimensional finite-element model. Included is a listing of the computer program, a description of the input data, and an example of the output

38 CFR 21.7120 - Courses included in programs of education.

Science.gov (United States)

2010-07-01

... officiating, or other sport or athletic courses, except courses of applied music, physical education, or... programs of education. 21.7120 Section 21.7120 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION All Volunteer Force Educational...

Program description and summaries of fiscal year 1981 activities

International Nuclear Information System (INIS)

1981-10-01

This Division supports exploratory research on novel concepts related to energy. The research is usually aimed at establishing the scientific feasibility of a concept and, where appropriate, also at estimating its economic viability. Because projects supported inevitably involve a high degree of risk, an indication of a high potential payoff is required. An immediate, specific application of the concept is not an absolute prerequisite for consideration; thus, for example, proposers of schemes leading to the development of x-ray lasers are not required to justify their proposals by discussing potential applications of such lasers. The concepts supported are typically at too early a stage of scientific verification to qualify for funding by DOE programs responsible for technology development. Where doubt exists, such programs are consulted, prior to proposal consideration by AEP, in order to establish their possible interest in the project

SHARED TECHNOLOGY TRANSFER PROGRAM

Energy Technology Data Exchange (ETDEWEB)

GRIFFIN, JOHN M. HAUT, RICHARD C.

2008-03-07

The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

Mark II containment lead plant program load evaluation and acceptance criteria

International Nuclear Information System (INIS)

1978-10-01

The report, prepared by the Office of Nuclear Reactor Regulation, addresses the portion of the Mark II owner's program that provides a generic methodology for establishing design basis LOCA and safety relief valve loads for the lead Mark II facilities (Zimmer, Shoreham, and LaSalle), i.e., the lead plant program. The report includes an evaluation of the Mark II owner's load methodology, a description of load methodologies that we find acceptable for use in the individual plant unique assessments, and the basis for the stated conclusions

User's manual for elegant Program Version 12.4, Manual Version 1

International Nuclear Information System (INIS)

Borland, M.

1993-01-01

Elegant stands for ''Electron Generation and Tracking,'' a somewhat out-of-date description of a fully 6D accelerator program that now does much more than generate particle distributions and track them elegant, written entirely in the C programming language, uses a variant of the MAD input format to describe accelerators, which may be either transport lines, circular machines, or a combination thereof. Program execution is driven by commands in a namelist format. This document describes the features available in elegant, listing the commands and their arguments. The differences between elegant and MAD formats for describing accelerators are listed. A series of examples of elegant input and output are given. Finally, appendices are included describing the post-processing programs

Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)

Energy Technology Data Exchange (ETDEWEB)

SINGH, G.

2000-10-17

This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

76 FR 59863 - Application and Approval Process for New Programs

Science.gov (United States)

2011-09-27

... jobs or occupations stemming from the program. We invite comments on the proposed wage analysis... description of the CIP to Sec. 600.2, Definitions. Under this section, the CIP would be defined as ``a taxonomy of instructional program classifications and descriptions developed by the U.S. Department of...

SCALPLO, Plotting of Flux Output from SCALE Program

International Nuclear Information System (INIS)

Hersman, A.; De Leege, P.F.A.; Hoogenboom, J.E.

1993-01-01

1 - Description of program or function: SCALPLO is a plot program, designed to plot flux, power and spectrum information. Data exchange between SCALE modules and SCALPLO is via CCCC-interface files. As not all modules can produce these files, there are special routines supplied with SCALPLO that can produce CCCC-like files. These routines can be included in the code and for XSDRPM, CITATION, ANISN and DOT, the place to include these routines is supplied. 2 - Method of solution: SCALPLO consists of two sections. Firstly the pre-processor, which selects and reads the required data. Secondly the plot section which produces the plot on the selected output device. 3 - Restrictions on the complexity of the problem: SCALPLO requires DISSPLA version 11.0 or higher. The choice of output device depends on the devices installed

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

International Nuclear Information System (INIS)

Ermi, A.M.

1997-01-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status

Proceedings of the of the Eleventh Workshop on Language Descriptions, Tools and Applications (LDTA 2011)

DEFF Research Database (Denmark)

This volume contains the proceedings of the Eleventh Workshop on Language Descriptions, Tools and Applications (LDTA 2011), held in Saarbrücken, Germany on March 26 & 27, 2011. LDTA is a two-day satellite event of ETAPS (European Joint Conferences on Theory and Practice of Software) and organized...... in cooperation with ACM SIGPLAN. LDTA is an application and tool-oriented workshop focused on grammarware---software based on grammars in some form. Grammarware applications are typically language processing applications and traditional examples include parsers, program analyzers, optimizers and translators......, as well as techniques and tools, to the test in a new way in the form of the LDTA Tool Challenge. Tool developers were invited to participate in the Challenge by developing solutions to a range of language processing tasks over a simple but evolving set of imperative programming languages. Tool challenge...

Karyotype characterization of Mugil incilis Hancock, 1830 (Mugiliformes: Mugilidae, including a description of an unusual co-localization of major and minor ribosomal genes in the family

Directory of Open Access Journals (Sweden)

Anne Kathrin Hett

Full Text Available This study reports the description of the karyotype of Mugil incilis from Venezuela. The chromosome complement is composed of 48 acrocentric chromosomes, which uniformly decrease in size. Therefore, the homologues can not be clearly identified, with the exception of one of the largest chromosome pairs, classified as number 1, whose homologues may show a subcentromeric secondary constriction, and of chromosome pair number 24, which is considerably smaller than the others. C-banding showed heterochromatic blocks at the centromeric/pericentromeric regions of all chromosomes, which were more conspicuous on chromosomes 1, given the C-positive signals include the secondary constrictions. AgNO3 and fluorescent in situ hybridization (FISH with 45S rDNA demonstrated that the nucleolus organizer regions are indeed located on the secondary constrictions of chromosome pair number 1. FISH with 5S rDNA revealed that the minor ribosomal genes are located on this same chromosome pair, near the NORs, though signals are closer to the centromeres and of smaller size, compared to those of the major ribosomal gene clusters. This is the first description of co-localization of major and minor ribosomal genes in the family. Data are discussed from a cytotaxonomic and phylogenetic perspective.

Fluid dynamics computer programs for NERVA turbopump

Science.gov (United States)

Brunner, J. J.

1972-01-01

During the design of the NERVA turbopump, numerous computer programs were developed for the analyses of fluid dynamic problems within the machine. Program descriptions, example cases, users instructions, and listings for the majority of these programs are presented.

Materials sciences programs, Fiscal year 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The Division of Materials Sciences is responsible for basic research and research facilities in materials science topics important to the mission of the Department of Energy. The programmatic divisions under the Office of Basic Energy Sciences are Chemical Sciences, Engineering and Geosciences, and Energy Biosciences. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship among synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences subfields include: physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 517 research programs including 255 at 14 DOE National Laboratories, 262 research grants (233 of which are at universities), and 29 Small Business Innovation Research Grants. Five cross-cutting indices located at the rear of this book identify all 517 programs according to principal investigator(s), materials, techniques, phenomena, and environment.

Starting a new residency program: a step-by-step guide for institutions, hospitals, and program directors

Directory of Open Access Journals (Sweden)

Michelle Barajaz

2016-08-01

Full Text Available Although our country faces a looming shortage of doctors, constraints of space, funding, and patient volume in many existing residency programs limit training opportunities for medical graduates. New residency programs need to be created for the expansion of graduate medical education training positions. Partnerships between existing academic institutions and community hospitals with a need for physicians can be a very successful means toward this end. Baylor College of Medicine and The Children's Hospital of San Antonio were affiliated in 2012, and subsequently, we developed and received accreditation for a new categorical pediatric residency program at that site in 2014. We share below a step-by-step guide through the process that includes building of the infrastructure, educational development, accreditation, marketing, and recruitment. It is our hope that the description of this process will help others to spur growth in graduate medical training positions.

Full-scale mark II CRT program facility description report

International Nuclear Information System (INIS)

Namatame, Ken; Kukita, Yutaka; Ito, Hideo; Yamamoto, Nobuo; Shiba, Masayoshi

1980-03-01

Started in fiscal year 1977, the Full-Scale Mark II CRT (Containment Response Test) Program is proceeding for the period of five years. The primary objective of the CRT Program is to provide a data base for evaluation of the pressure suppression pool hydrodynamic loads associated with a postulated loss-of-coolant accident in the BWR Mark II containment system. The test facility was designed and constructed from fiscal year 1977 to 1978, and completed in March 1979. It is 1/18 in volume and has a wetwell which is a full-scale replica of one 20 0 -sector of that of a reference Mark II. This report describes design concepts, dimensions and constructions of the test facility, as well as specifications, locations and installation schemes of the measuring equipments. Results of soil structure inspection, vacuum breaker test and shaker test of the containment shell are given in the appendices. (author)

U.S. program to develop superconducting magnetic energy storage

International Nuclear Information System (INIS)

Schoenung, S.M.; Hassenzahl, W.V.; Filios, P.G.

1988-01-01

The United States Government, along with the Electric Power Research Institute (EPRI), has initiated a program to develop Superconducting Magnetic Energy Storage (SMES). This program is designed to answer questions of technical and economic viability by the mid-1990s, thereby paving the way to commercialization. EPRI has supported this technology since 1981 and is interested in its potential use in diurnal electric load-leveling. The U.S. Government has an additional interest in the potential of SMES to power ground-based lasers for Strategic Defense purposes. This paper presents a brief description of SMES technology, a review of the programmatic aspects of the ongoing program, including EPRI and DoD objectives, critical issues, and program milestones. The potential impact of high temperature superconductors on SMES is also discussed

Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

Science.gov (United States)

Moysan, J.; Gueudré, C.; Ploix, M.-A.; Corneloup, G.; Guy, Ph.; Guerjouma, R. El; Chassignole, B.

In the case of multi-pass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Anisotropy results from the metal solidification and is correlated with the grain orientation. A precise description of the material is one of the key points to obtain reliable results with wave propagation codes. A first advance is the model MINA which predicts the grain orientations in multi-pass 316-L steel welds. For flat position welding, good predictions of the grains orientations were obtained using 2D modelling. In case of welding in position the resulting grain structure may be 3D oriented. We indicate how the MINA model can be improved for 3D description. A second advance is a good quantification of the attenuation. Precise measurements are obtained using plane waves angular spectrum method together with the computation of the transmission coefficients for triclinic material. With these two first advances, the third one is now possible: developing an inverse method to obtain the material description through ultrasonic measurements at different positions.

Intensive Research Program on Advances in Nonsmooth Dynamics 2016

CERN Document Server

Jeffrey, Mike; Lázaro, J; Olm, Josep

2017-01-01

This volume contains extended abstracts outlining selected talks and other selected presentations given by participants throughout the "Intensive Research Program on Advances in Nonsmooth Dynamics 2016", held at the Centre de Recerca Matemàtica (CRM) in Barcelona from February 1st to April 29th, 2016. They include brief research articles reporting new results, descriptions of preliminary work or open problems, and outlines of prominent discussion sessions. The articles are all the result of direct collaborations initiated during the research program. The topic is the theory and applications of Nonsmooth Dynamics. This includes systems involving elements of: impacting, switching, on/off control, hybrid discrete-continuous dynamics, jumps in physical properties, and many others. Applications include: electronics, climate modeling, life sciences, mechanics, ecology, and more. Numerous new results are reported concerning the dimensionality and robustness of nonsmooth models, shadowing variables, numbers of limit...