Groups – Additive Notation

OpenAIRE

Coghetto Roland

2015-01-01

We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

Comparison of the learning of two notations: A pilot study

Directory of Open Access Journals (Sweden)

ASHFAQ AKRAM

2017-05-01

Full Text Available Introduction: MICAP is a new notation in which the teeth are indicated by letters (I-incisor, C-canine, P-premolar, M-molar and numbers [1,2,3] which are written superscript and subscript on the relevant letters. FDI tooth notation is a two digit system where one digit shows quadrant and the second one shows the tooth of the quadrant. This study aimed to compare the short term retention of knowledge of two notation systems (FDI two digit system and MICAP notation by lecture method. Methods: Undergraduate students [N=80] of three schools participated in a cross-over study. Two theory-driven classroom based lectures on MICAP notation and FDI notation were delivered separately. Data were collected using eight randomly selected permanent teeth to be written in MICAP format and FDI format at pretest (before the lecture, post-test I (immediately after lecture and post-test II (one week after the lecture. Analysis was done by SPSS version 20.0 using repeated measures ANCOVA and independent t-test. Results: The results of pre-test and post-test I were similar for FDI education. Similar results were found between post-test I and post-test II for MICAP and FDI notations. Conclusion: The study findings indicated that the two notations (FDI and MICAP were equally mind cognitive. However, the sample size used in this study may not reflect the global scenario. Therefore, we suggest more studies to be performed for prospective adaptation of MICAP in dental curriculum.

Groups – Additive Notation

Directory of Open Access Journals (Sweden)

Coghetto Roland

2015-06-01

Full Text Available We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

The Conversion of Wiswesser Line Notations to Ring Codes. I. The Conversion of Ring Systems

Science.gov (United States)

Granito, Charles E.; And Others

1972-01-01

The computerized conversion of Wiswesser Line Notations to Ring Codes, using a two-part approach, and the set of computer programs generated for the conversion of ring systems are described. (9 references) (Author)

Sprog som musikalsk notation

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

Artiklen behandler sprogbrug som supplement til noderne fra barokken og frem; Fluxus og Scratch Orchestra; den engelske Verbal Anthology; Stockhausens brug af verbal notation før tekst-samlingerne; detaljerede analyser af de to samlinger. Der konkluderes bla. om forskellige grader af fastlæggelse...

Semiotics Of Shape Of Block Notation As Icon Of Planetary Orbit

Directory of Open Access Journals (Sweden)

Ketut Sumerjana

2017-05-01

Full Text Available Block notation has a specific shape; however, its existence and the function of its shape are not recognized and are made to be intangible by its function as a symbol of tapping sound. In general, the basic shape of the block notation looks like an ellipse and is similar to the planetary orbit. Therefore, this present study focuses on the ellipse-shaped block notation as the icon of the planetary orbit. The phenomenological qualitative method was employed to interpret the meaning of the basic shape of the block notation as the icon of planetary orbit. The data were collected through guided interview and library research. The data were analyzed using the semiotic process, meaning that in the first phase the text was analyzed based on the shape structure and in the second phase the text was heuristically analyzed. The result of the study shows that the ellipse-shaped block notation is the planetary orbit whose function changes from the manifest function into the latent one, resulting from the function as the tapping sound value. Keywords: form, notation, icon, orbit, planet

GSN - The Goal Structuring Notation A Structured Approach to Presenting Arguments

CERN Document Server

Spriggs, John

2012-01-01

Goal Structuring Notation (GSN)  is becoming increasing popular; practitioners use it in the railway, air traffic management and nuclear industries, amongst others.  Originally developed to present safety assurance arguments, GSN need not be restricted to safety assurances only; in principle, you can use it to present (and test) any argument.  Anyone wishing to support, or refute, a claim can use GSN. Written by an experienced practitioner, The Goal Structuring Notation is both for those who wish to prepare and present compelling arguments using the notation, and for those who wish to review such arguments critically and effectively. To emphasise the versatility of this approach The Goal Structuring Notation presents examples and questions based on diverse subject areas including Business Management, Drama, Engineering, Politics and Astrobiology. Simple examples introduce each symbol of the notation before introducing more complex structures which illustrate how the symbols work together in practical scena...

Speechant: A Vowel Notation System to Teach English Pronunciation

Science.gov (United States)

dos Reis, Jorge; Hazan, Valerie

2012-01-01

This paper introduces a new vowel notation system aimed at aiding the teaching of English pronunciation. This notation system, designed as an enhancement to orthographic text, was designed to use concepts borrowed from the representation of musical notes and is also linked to the acoustic characteristics of vowel sounds. Vowel timbre is…

Rational-number comparison across notation: Fractions, decimals, and whole numbers.

Science.gov (United States)

Hurst, Michelle; Cordes, Sara

2016-02-01

Although fractions, decimals, and whole numbers can be used to represent the same rational-number values, it is unclear whether adults conceive of these rational-number magnitudes as lying along the same ordered mental continuum. In the current study, we investigated whether adults' processing of rational-number magnitudes in fraction, decimal, and whole-number notation show systematic ratio-dependent responding characteristic of an integrated mental continuum. Both reaction time (RT) and eye-tracking data from a number-magnitude comparison task revealed ratio-dependent performance when adults compared the relative magnitudes of rational numbers, both within the same notation (e.g., fractions vs. fractions) and across different notations (e.g., fractions vs. decimals), pointing to an integrated mental continuum for rational numbers across notation types. In addition, eye-tracking analyses provided evidence of an implicit whole-number bias when we compared values in fraction notation, and individual differences in this whole-number bias were related to the individual's performance on a fraction arithmetic task. Implications of our results for both cognitive development research and math education are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

A multiple-perspective approach to graphic notation

DEFF Research Database (Denmark)

Cohen, Susanna; Gilboa, Avi; Bergstrøm-Nielsen, Carl

2011-01-01

The need to describe and analyze the contents of music therapy sessions, together with the need to find methods of raising therapist awareness, are areas of great interest for the music therapist. In this study an expansion of Bergstrøm-Nielsen’s (1993) method of graphic notation for representing...... music therapy improvisations is presented: multipleperspective graphic notation (MGN). A description of the method is provided, followed by a demonstration using a clinical improvisation taken from an individual music therapy session. The use of the MGN as a tool for raising therapist awareness...

Effect of Color-Coded Notation on Music Achievement of Elementary Instrumental Students.

Science.gov (United States)

Rogers, George L.

1991-01-01

Presents results of a study of color-coded notation to teach music reading to instrumental students. Finds no clear evidence that color-coded notation enhances achievement on performing by memory, sight-reading, or note naming. Suggests that some students depended on the color-coding and were unable to read uncolored notation well. (DK)

Intuitiv musik og grafisk notation

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

Beskrivelser af fagene, som har eksisteret på Aalborg Universitet siden midten af firserne. I intuitiv musik trænes fri improvisation gennem bla. gruppedynamiske øvelser, opmærksomhedsøvelser og parameterøvelser. Desuden skaber de studerende selv åbne kompositioner. Faget grafisk notation træner...... det at skabe lyttepartiturer over en given musik. Studerendes arbejder citeres. Forfatteren diskuterer fagenes teoretiske kontekst og argumentererfor mere teoretisk opmærksomhed på musikken som det medium, musikterapien foregår i og peger bla. på sprogteori og Jakobson. NB: beskrivelsen af fagene er i...... skrivende stund, 2011, ikke længere aktuel. Intuitiv musik lægger mindre vægt på komposition og mere vægt på brug af hovedinstrument i intuitiv sammenhæng. Grafisk notation er integreret ind i et større fag (også varetaget af undertegnede) der tillige omfatter andre metoder til beskrivelse og tolkning....

Dance notations and robot motion

CERN Document Server

Abe, Naoko

2016-01-01

How and why to write a movement? Who is the writer? Who is the reader? They may be choreographers working with dancers. They may be roboticists programming robots. They may be artists designing cartoons in computer animation. In all such fields the purpose is to express an intention about a dance, a specific motion or an action to perform, in terms of intelligible sequences of elementary movements, as a music score that would be devoted to motion representation. Unfortunately there is no universal language to write a motion. Motion languages live together in a Babel tower populated by biomechanists, dance notators, neuroscientists, computer scientists, choreographers, roboticists. Each community handles its own concepts and speaks its own language. The book accounts for this diversity. Its origin is a unique workshop held at LAAS-CNRS in Toulouse in 2014. Worldwide representatives of various communities met there. Their challenge was to reach a mutual understanding allowing a choreographer to access robotics ...

Gap-minimal systems of notations and the constructible hierarchy

Science.gov (United States)

Lucian, M. L.

1972-01-01

If a constructibly countable ordinal alpha is a gap ordinal, then the order type of the set of index ordinals smaller than alpha is exactly alpha. The gap ordinals are the only points of discontinuity of a certain ordinal-valued function. The notion of gap minimality for well ordered systems of notations is defined, and the existence of gap-minimal systems of notations of arbitrarily large constructibly countable length is established.

Notation for integrals of transport theory

International Nuclear Information System (INIS)

Lewins, J.D.

1993-01-01

Like many authors in nuclear reactor physics, I have been careless in my notation but now I regret my deficiences! This letter attempts redress in calling upon my colleagues to take more care in writing integrals as they occur in our trade. I draw attention to what are common errors, with examples drawn from standard tests and well-established journals. I mean no disrespect to their authors and editors; we have, nearly all of us, not written what we meant. I propose that we should undertake to follow a more rigorous notation. It is convenient to divide the examination into a section studying integrals over the unit directional vector Ω and subsequently apply the principles appropriate to that class of integrals to integrals over a vector phase-space. (Author)

Flexible Process Notations for Cross-organizational Case Management Systems

DEFF Research Database (Denmark)

Slaats, Tijs

: the notations in which the processes are defined. Traditional process notations are flow-based: control of the process flows from one activity to the next. This paradigm inherently encourages modellers to think in terms of strict orderings instead of supporting flexibility. Flow-based models that do try...... of the process and techniques for runtime adaptation. This dissertation reports on the results of the Technologies for Flexible Cross-organizational Case Management Systems (FLExCMS) research project which was started in cooperation between ITU and the company Exformatics A/S. The goals of the project were...... to strengthen the industrial adoption of constraintbased notations and techniques by further developing DCR Graphs to be industrially applicable, with a particular focus on guaranteeing safety for cross-organizational processes. We will show how DCR Graphs have been extended with new dimensions such as time...

A Formal Messaging Notation for Alaskan Aviation Data

Science.gov (United States)

Rios, Joseph L.

2015-01-01

Data exchange is an increasingly important aspect of the National Airspace System. While many data communication channels have become more capable of sending and receiving data at higher throughput rates, there is still a need to use communication channels efficiently with limited throughput. The limitation can be based on technological issues, financial considerations, or both. This paper provides a complete description of several important aviation weather data in Abstract Syntax Notation format. By doing so, data providers can take advantage of Abstract Syntax Notation's ability to encode data in a highly compressed format. When data such as pilot weather reports, surface weather observations, and various weather predictions are compressed in such a manner, it allows for the efficient use of throughput-limited communication channels. This paper provides details on the Abstract Syntax Notation One (ASN.1) implementation for Alaskan aviation data, and demonstrates its use on real-world aviation weather data samples as Alaska has sparse terrestrial data infrastructure and data are often sent via relatively costly satellite channels.

Application fields for the new Object Management Group (OMG) Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN) in the perioperative field.

Science.gov (United States)

Wiemuth, M; Junger, D; Leitritz, M A; Neumann, J; Neumuth, T; Burgert, O

2017-08-01

Medical processes can be modeled using different methods and notations. Currently used modeling systems like Business Process Model and Notation (BPMN) are not capable of describing the highly flexible and variable medical processes in sufficient detail. We combined two modeling systems, Business Process Management (BPM) and Adaptive Case Management (ACM), to be able to model non-deterministic medical processes. We used the new Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN). First, we explain how CMMN, DMN and BPMN could be used to model non-deterministic medical processes. We applied this methodology to model 79 cataract operations provided by University Hospital Leipzig, Germany, and four cataract operations provided by University Eye Hospital Tuebingen, Germany. Our model consists of 85 tasks and about 20 decisions in BPMN. We were able to expand the system with more complex situations that might appear during an intervention. An effective modeling of the cataract intervention is possible using the combination of BPM and ACM. The combination gives the possibility to depict complex processes with complex decisions. This combination allows a significant advantage for modeling perioperative processes.

Computerized crystal-chemical classification of silicates and related materials with CRYSTANA and formula notation for classified structures

International Nuclear Information System (INIS)

Klein, Hans-Joachim; Liebau, Friedrich

2008-01-01

The computer program CRYSTANA is described which implements a method for the crystal-chemical classification of silicates and related materials. This method is mainly based upon the topological structure of the connected units of a compound and can be applied when the units are built from tetrahedra as coordination polyhedra. The classification parameters and the rules which have to be applied for their determination are summarized and a formalization of the method is provided based upon a finite graph representation of the units. A description of how CRYSTANA can be used and which kind of output it produces is included. From this output crystal-chemical formulas can be derived, which differ slightly from an existing notation in order to meet recommendations of the International Union of Crystallography. - The computer program CRYSTANA is described which implements a method for the crystal-chemical classification of silicates and related materials. The implementation is based upon a graph-theoretical formalization of the classification method. An extended notation of crystal-chemical formulas is introduced. The formulas can be derived from the output of the program

Japanese Children's Understanding of Notational Systems

Science.gov (United States)

Takahashi, Noboru

2012-01-01

This study examined Japanese children's understanding of two Japanese notational systems: "hiragana" and "kanji". In three experiments, 126 3- to 6-year-olds were asked to name words written in hiragana or kanji as they appeared with different pictures. Consistent with Bialystok ("Journal of Experimental Child…

Graphic Notation as a Tool in Describing and Analyzing Music Therapy Improvisations

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

1993-01-01

, involving graphic brainstorms,using coordinative systems and other frameworks, interpretative method including working on specifically musical counter-transference and special graphic exercises are outlined. Work by students at Aalborg University, Denmark, is quoted. General perspectives including relations......Presents graphic notation as the making of aural scores to memorise or analyse improvised music therapy processes, capturing also those aspectsthe usual music notation would not cover. An example in some detail is shown, the music taken from a well known Nordoff/Robbins recording. Training method...... to music analysis in musicology and to the history,epistemology and cultural status of musical notation is discussed....

Musical notation reading in pure alexia

DEFF Research Database (Denmark)

Starrfelt, Randi; Wong, Yetta K.

2017-01-01

Pure alexia (PA) is an acquired reading disorder following lesions to left ventral temporo-occipital cortex. Patients with PA read slowly but correctly, and show an abnormal effect of word length on RTs. However, it is unclear how pure alexia may affect musical notation reading. We report a pure...

Intuitive Music and Graphic Notation:Two Musical Training Disciplines within Music Therapy Education and their theoretical Backgrounds

OpenAIRE

Bergstrøm-Nielsen, Carl

1999-01-01

Describes subjects existing at Aalborg University since the middle eighties. "Intuitive Music" trains free improvisation through exercises including group-dynamic exercises, awareness exercises and parameter exercises. Students also create open compositions. "Graphic notation"concerns aural scores. Students' works are quoted. The writer discusses the theoretical context and advocates for giving more attention to music as the medium in which music therapy takes place, referring to language the...

NOTAT - Projekt Cykeljakken

DEFF Research Database (Denmark)

Lahrmann, Harry; Madsen, Jens Christian Overgaard

Dette notat er en del af afrapporteringen af Projekt Cykeljakken, hvor hypotesen var, at cyklisters sikkerhed kan forbedres ved at øge deres synlighed i trafikbilledet. I projektet undersøgte vi denne hypotese ved at teste, om en cykeljakke med høj synlighed (farve og reflekser) øger cyklisters...... sikkerhed. Projektet blev gennemført som et randomiseret forsøg, hvor vi gav en cykeljakke til 6.800 frivillige cyklister. Efter tilfældig udvælgelse fik halvdelen – testgruppen – cykeljakken med det samme, og lovede at køre med jakken, hver gang de cyklede i det år, projektet varede. Den anden halvdel...

The 2008 ICOH Workshop on Skin Notation

NARCIS (Netherlands)

Sartorelli, P.; Ahlers, H. W.; Cherrie, J. W.; Kezic, Sanja; Johanson, G.; Filon, Francesca Larese; Nielsen, J. B.; Shepherd, A.; Stull, J.; Williams, Faith

2010-01-01

Background: On 29 March 2008 the International Commission on Occupational Health (ICOH) Scientific Committee on Occupational and Environmental Dermatoses organized a Skin Notation Workshop hosted by the 11(th) International Percutaneous Penetration Perspectives Conference (La Grande Motte, France).

Children's understanding of fraction and decimal symbols and the notation-specific relation to pre-algebra ability.

Science.gov (United States)

Hurst, Michelle A; Cordes, Sara

2018-04-01

Fraction and decimal concepts are notoriously difficult for children to learn yet are a major component of elementary and middle school math curriculum and an important prerequisite for higher order mathematics (i.e., algebra). Thus, recently there has been a push to understand how children think about rational number magnitudes in order to understand how to promote rational number understanding. However, prior work investigating these questions has focused almost exclusively on fraction notation, overlooking the open questions of how children integrate rational number magnitudes presented in distinct notations (i.e., fractions, decimals, and whole numbers) and whether understanding of these distinct notations may independently contribute to pre-algebra ability. In the current study, we investigated rational number magnitude and arithmetic performance in both fraction and decimal notation in fourth- to seventh-grade children. We then explored how these measures of rational number ability predicted pre-algebra ability. Results reveal that children do represent the magnitudes of fractions and decimals as falling within a single numerical continuum and that, despite greater experience with fraction notation, children are more accurate when processing decimal notation than when processing fraction notation. Regression analyses revealed that both magnitude and arithmetic performance predicted pre-algebra ability, but magnitude understanding may be particularly unique and depend on notation. The educational implications of differences between children in the current study and previous work with adults are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

DNA expressions - A formal notation for DNA

NARCIS (Netherlands)

Vliet, Rudy van

2015-01-01

We describe a formal notation for DNA molecules that may contain nicks and gaps. The resulting DNA expressions denote formal DNA molecules. Different DNA expressions may denote the same molecule. Such DNA expressions are called equivalent. We examine which DNA expressions are minimal, which

A Morphology of Medieval Notations in the Optical Neume Recognition Project

Directory of Open Access Journals (Sweden)

Kate Helsen

2017-01-01

Full Text Available The study of medieval notations depends on effective categorization of individual signs in order to facilitate a comprehensive understanding of their musical meaning. Over the past century, chant scholars have developed several kinds of neume tables which arrange and contextualize neumes either according to graphical type, chronology, or scribal tradition. Some neume tables contain longer strings of neumes that link certain notation conventions with performance traditions. The course of neume table development reads like a history of the study of early notations, itself, and reveals the evolving interests and pursuits of the scholars who created them. It also sets the stage for the latest use of the neume table as a reference for document analysis software applied to digital images of medieval manuscripts. Now, instead of presenting a static list of discrete signs, the neume table can be understood as a reflection of the notational variety and nuance of the hundreds of thousands of neumes contained in every book of liturgical chant. On this scale, neume tables help scholars to understand the use of medieval neumes in the same way a linguist understands the morphology of words. This article presents the principles on which this new kind of neume table has been developed and suggests the ways in which this new way of thinking might inform the discipline in the future.

75 FR 22148 - Request for the Technical Review of 22 Draft Skin Notation Assignments and Skin Notation Profiles

Science.gov (United States)

2010-04-27

... toxicity through dermal absorption. Chemicals assigned the notation SK: SYS (FATAL) have been identified as... systemic toxicity, it will be labeled as SK: SYS- DIR (COR). When scientific data for a chemical indicate...-Dichloropropene (CAS 542-75- 6). A-02 Phenol (CAS 108-95-2). A-03 Hydrogen fluoride/hydrofluoric acid (CAS 7664-39...

Investigating and improving student understanding of quantum mechanical observables and their corresponding operators in Dirac notation

Science.gov (United States)

Marshman, Emily; Singh, Chandralekha

2018-01-01

In quantum mechanics, for every physical observable, there is a corresponding Hermitian operator. According to the most common interpretation of quantum mechanics, measurement of an observable collapses the quantum state into one of the possible eigenstates of the operator and the corresponding eigenvalue is measured. Since Dirac notation is an elegant notation that is commonly used in upper-level quantum mechanics, it is important that students learn to express quantum operators corresponding to observables in Dirac notation in order to apply the quantum formalism effectively in diverse situations. Here we focus on an investigation that suggests that, even though Dirac notation is used extensively, many advanced undergraduate and PhD students in physics have difficulty expressing the identity operator and other Hermitian operators corresponding to physical observables in Dirac notation. We first describe the difficulties students have with expressing the identity operator and a generic Hermitian operator corresponding to an observable in Dirac notation. We then discuss how the difficulties found via written surveys and individual interviews were used as a guide in the development of a quantum interactive learning tutorial (QuILT) to help students develop a good grasp of these concepts. The QuILT strives to help students become proficient in expressing the identity operator and a generic Hermitian operator corresponding to an observable in Dirac notation. We also discuss the effectiveness of the QuILT based on in-class evaluations.

Implementation of the Business Process Modelling Notation (BPMN) in the modelling of anatomic pathology processes.

Science.gov (United States)

Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Oscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín

2008-07-15

Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals.

Comparison of Japanese notation and meanings among three terminologies in radiological technology domain

International Nuclear Information System (INIS)

Yagahara, Ayako; Tsuji, Shintaro; Fukuda, Akihisa; Nishimoto, Naoki; Ogasawara, Katsuhiko

2016-01-01

The purpose of this study is to investigate the differences in the notation of technical terms and their meanings among three terminologies in Japanese radiology-related societies. The three terminologies compared in this study were 'radiological technology terminology' and its supplement published by the Japan Society of Radiological Technology, 'medical physics terminology' published by the Japan Society of Medical Physics, and 'electric radiation terminology' published by the Japan Radiological Society. Terms were entered into spreadsheets and classified into the following three categories: Japanese notation, English notation, and meanings. In the English notation, terms were matched to character strings in the three terminologies and were extracted and compared. The Japanese notations were compared among three terminologies, and the difference between the meanings of the two terminologies radiological technology terminology and electric radiation terminology were compared. There were a total of 14,982 terms in the three terminologies. In English character strings, 2,735 terms were matched to more than two terminologies, with 801 of these terms matched to all the three terminologies. Of those terms in English character strings matched to three terminologies, 752 matched to Japanese character strings. Of the terms in English character strings matched to two terminologies, 1,240 matched to Japanese character strings. With regard to the meanings category, eight terms had mismatched meanings between the two terminologies. For these terms, there were common concepts between two different meaning terms, and it was considered that the derived concepts were described based on domain. (author)

On the Art of Notation

DEFF Research Database (Denmark)

Bertram, Peter

2014-01-01

The book is concerned with the double nature of architectural drawing as both an artefact in itself and an instruction. The ­creation of measurements for an architectural construction to be takes place as a negotiation of this productive doubleness. The negotiation is termed art of notation. The ....... The book focuses on the singularity of drawing. It discusses the nature of the motif, the role of technique and the ­development of an analogue drawing language. It is well illustrated with ­architectural sketches....

Statistical Analysis of the Association Between Subject Headings and Their Corresponding Class Notations in Science and Technology Monographs.

Science.gov (United States)

Khosh-khui, Abolghasem

This study investigates the degree of relationship between scientific and technical subject headings and their corresponding class notations in the Dewey Decimal (DDC) and Library of Congress Classification (LCC) systems. The degree of association between a subject heading and its corresponding class of notation or notations is measured by…

19 CFR 125.34 - Countersigning of documents and notation of bad order or discrepancy.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Countersigning of documents and notation of bad... and Receipt § 125.34 Countersigning of documents and notation of bad order or discrepancy. When a... and shall note thereon any bad order or discrepancy. When available, the importing carrier's tally...

New framework for standardized notation in wastewater treatment modelling

DEFF Research Database (Denmark)

Corominas, L.; Rieger, L.; Takacs, I.

2010-01-01

Many unit process models are available in the field of wastewater treatment. All of these models use their own notation, causing problems for documentation, implementation and connection of different models (using different sets of state variables). The main goal of this paper is to propose a new...... is a framework that can be used in whole plant modelling, which consists of different fields such as activated sludge, anaerobic digestion, sidestream treatment, membrane bioreactors, metabolic approaches, fate of micropollutants and biofilm processes. The main objective of this consensus building paper...... notational framework which allows unique and systematic naming of state variables and parameters of biokinetic models in the wastewater treatment field. The symbols are based on one main letter that gives a general description of the state variable or parameter and several subscript levels that provide...

Introductie Decision Model and Notation (DMN) : Deel 3

NARCIS (Netherlands)

dr. Martijn Zoet; Koen Smit

2017-01-01

Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaardtaal te creëren om 1) requirements voor

A comparison of BPMN 2.0 with other notations for manufacturing processes

Science.gov (United States)

García-Domínguez, A.; Marcos, Mariano; Medina, I.

2012-04-01

In order to study their current practices and improve on them, manufacturing firms need to view their processes from several viewpoints at various abstraction levels. Several notations have been developed for this purpose, such as Value Stream Mappings or IDEF models. More recently, the BPMN 2.0 standard from the Object Management Group has been proposed for modeling business processes. A process organizes several activities (manual or automatic) into a single higher-level entity, which can be reused elsewhere in the organization. Its potential for standardizing business interactions is well-known, but there is little work on using BPMN 2.0 to model manufacturing processes. In this work some of the previous notations are outlined and BPMN 2.0 is positioned among them after discussing it in more depth. Some guidelines on using BPMN 2.0 for manufacturing are offered, and its advantages and disadvantages in comparison with the other notations are presented.

Extending Profiles with Stereotypes for Composite Concepts

NARCIS (Netherlands)

Quartel, Dick; Dijkman, R.M.; van Sinderen, Marten J.; Briand, L.; Williams, C.

2005-01-01

This paper proposes an extension of the UML 2.0 profiling mechanism. This extension facilitates a language designer to introduce composite concepts as separate conceptual and notational elements in a modelling language. Composite concepts are compositions of existing concepts. To facilitate the

Introductie Decision Model and Notation (DMN) : Deel 1

NARCIS (Netherlands)

dr. Martijn Zoet; Koen Smit

2017-01-01

Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaard taal te creëren om 1) requirements voor

Introductie Decision Model and Notation (DMN) : Deel 2

NARCIS (Netherlands)

dr. Martijn Zoet; Koen Smit

2017-01-01

Sinds september 2015 is de ‘business rule management wereld’ / ‘decision management wereld’ weer een standaard rijker: The Decision Model and Notation (DMN). De Object Management Group (OMG) heeft deze nieuwe standaard uitgebracht met als doel een standaard taal te creëren om 1) requirements voor

SCJ-Circus: a refinement-oriented formal notation for Safety-Critical Java

Directory of Open Access Journals (Sweden)

Alvaro Miyazawa

2016-06-01

Full Text Available Safety-Critical Java (SCJ is a version of Java whose goal is to support the development of real-time, embedded, safety-critical software. In particular, SCJ supports certification of such software by introducing abstractions that enforce a simpler architecture, and simpler concurrency and memory models. In this paper, we present SCJ-Circus, a refinement-oriented formal notation that supports the specification and verification of low-level programming models that include the new abstractions introduced by SCJ. SCJ-Circus is part of the family of state-rich process algebra Circus, as such, SCJ-Circus includes the Circus constructs for modelling sequential and concurrent behaviour, real-time and object orientation. We present here the syntax and semantics of SCJ-Circus, which is defined by mapping SCJ-Circus constructs to those of standard Circus. This is based on an existing approach for modelling SCJ programs. We also extend an existing Circus-based refinement strategy that targets SCJ programs to account for the generation of SCJ-Circus models close to implementations in SCJ.

How to improve skin notation

DEFF Research Database (Denmark)

Sartorelli, Pietro; Ahlers, Heinz W.; Alanko, Kristiina

2007-01-01

The ICOH Scientific Committee on Occupational and Environmental Dermatoses organized an International Workshop on "Dermal risk assessment at workplace" with the aim of focussing on the different ways of approaching the concept of skin notation (S) for chemicals. The Workshop participants presented...... their ideas on several aspects of S such as the problems related to the absorption through the compromised skin, the different approaches to S and models that can be used as alternatives to S. Participants agreed to produce a position paper with the goal of exploring the actions needed to improve the S system...

An Eye-tracking Study of Notational, Informational, and Emotional Aspects of Learning Analytics Representations

DEFF Research Database (Denmark)

Vatrapu, Ravi; Reimann, Peter; Bull, Susan

2013-01-01

This paper presents an eye-tracking study of notational, informational, and emotional aspects of nine different notational systems (Skill Meters, Smilies, Traffic Lights, Topic Boxes, Collective Histograms, Word Clouds, Textual Descriptors, Table, and Matrix) and three different information states...... (Weak, Average, & Strong) used to represent student's learning. Findings from the eye-tracking study show that higher emotional activation was observed for the metaphorical notations of traffic lights and smilies and collective representations. Mean view time was higher for representations...... of the "average" informational learning state. Qualitative data analysis of the think-aloud comments and post-study interview show that student participants reflected on the meaning-making opportunities and action-taking possibilities afforded by the representations. Implications for the design and evaluation...

A Proposal of a Color Music Notation System on a Single Melody for Music Beginners

Science.gov (United States)

Kuo, Yi-Ting; Chuang, Ming-Chuen

2013-01-01

Music teachers often encounter obstructions in teaching beginners in music reading. Conventional notational symbols require beginners to spend significant amount of time in memorizing, which discourages learning at early stage. This article proposes a newly-developed color music notation system that may improve the recognition of the staff and the…

Automatic Analysis of Dewey Decimal Classification Notations

OpenAIRE

Reiner, Ulrike

2007-01-01

Ulrike Reiner, Verbundzentrale des Gemeinsamen Bibliotheksverbundes (VZG) Göttingen, stellte ihr Projekt der automatischen Analyse von Notationen der Dewey-Dezimalklassifikation (DDC) vor. DDC-Notationen zeichnen sich dadurch aus, dass sie in aller Regel lang und komplex sind und in ihrer Herstellung zahlreiche Regeln zu durchlaufen haben. Ihr Computerprogramm analysiert DDC-Notationen und gibt alle in einer DDC-Notation enthaltenen DDC-Notationen samt DDC-Klassenbenennungen aus. Die gewonnen...

Notational analysis on tactical passing skills used by collegiate ...

African Journals Online (AJOL)

Notational analysis on tactical passing skills used by collegiate players in an indoor hockey masum tournament. K.N. Hasnor, H Hizan, M.I. Shahril, N.A. Kosni, M.R. Abdullah, A.B.H.M. Maliki, S.M. Mat-Rasid ...

SIGMA-NOTATION AND THE EQUIVALENCE OF P AND NP CLASSES

Directory of Open Access Journals (Sweden)

Miron I.Telpiz

2012-07-01

Full Text Available The aim of this paper is to show that –notation, based on the positionalityprinciple, doesn’t just answer the question of equivalence of P and NP problemclasses, but also represents the key to the solution of (some more general problemsfrom the domain of multivalued logics. However, the achievement of such an aim inits full scope is hardly possible within the limits of this paper. Therefore, the followingplan shall be realized:Firstly, the logic algebra fragment necessary for the solution of the P and NPclasses equivalence problem shall be expounded.Secondly, the necessary symbols and definitions shall be introduced to show thatthe calculations in the domain of the multivalued logic can be directly executed withinthe framework of –notation.

Words as Music Notation (1998/2012)

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

2012-01-01

The use of verbal notation elements in Western music from the baroque period and onwards is outlined, with examples. Some important examples of Fluxus, Scratch Orchestra and subsequent works are characterised. Two Stockhausen works before the text collections are examined for their different uses...... of verbal elements. From this as well as from the analysis of Stockhausen's text collections (see the articles mentioned at the top of the article) it is concluded that verbal language since 1945 may describe both musical material (parameters) and processes – including game rules and if-then relations...

Integrating Behaviour in Software Models: An Event Coordination Notation

DEFF Research Database (Denmark)

Kindler, Ekkart

2011-01-01

One of the main problems in model-based software engineering is modelling behaviour in such a way that the behaviour models can be easily integrated with each other, with the structural software models and with pre-existing software. In this paper, we propose an event coordination notation (ECNO)...

System for notational analysis in small-sided soccer games

NARCIS (Netherlands)

Van Maarseveen, Mariette J.J.; Oudejans, Raoul R.D.; Savelsbergh, Geert J.P.

2017-01-01

The objective of this study was to compose an objective and detailed notational analysis system for 3 vs. 2GK smallsided soccer games, in which three roles are examined: attacker with ball, attacker without ball and defender. The actions and the outcome of the actions were registered for each player

NOTAT - Projekt Cykeljakken

DEFF Research Database (Denmark)

Thedchannamoorthy, Shaline; Madsen, Tanja Kidholm Osmann; Araghi, Bahar Namaki

Dette notat er en del af afrapporteringen af Projekt Cykeljakken, hvor hypotesen var, at cyklisters sikkerhed kan forbedres ved at øge deres synlighed i trafikbilledet. I projektet undersøgte vi denne hypotese ved at teste, om en cykeljakke med høj synlighed (farve og reflekser) øger cyklisters...... sikkerhed. Projektet blev gennemført som et randomiseret forsøg, hvor vi gav en cykeljakke til 6.800 frivillige cyklister. Efter tilfældig udvælgelse fik halvdelen – testgruppen – cykeljakken med det samme, og lovede at køre med jakken, hver gang de cyklede i det år, projektet varede. Den anden halvdel...... udgjorde en såkaldt kontrolgruppe, som først fik cykeljakken, da projektperioden var omme. Hver måned indrapporterede deltagerne uheld, som de havde været involverede i som cyklist i den forgangne måned, ligesom testgruppen en tilfældig dag i måneden blev spurgt, om de havde benyttet cykeljakken på deres...

Extending Profiles with Stereotypes for Composite Concepts

OpenAIRE

Quartel, Dick; Dijkman, R.M.; van Sinderen, Marten J.; Briand, L.; Williams, C.

2005-01-01

This paper proposes an extension of the UML 2.0 profiling mechanism. This extension facilitates a language designer to introduce composite concepts as separate conceptual and notational elements in a modelling language. Composite concepts are compositions of existing concepts. To facilitate the introduction of composite concepts, the notion of stereotype is extended. This extension defines how a composite concept can be specified and added to a language’s metamodel, ithout modifying the exist...

A Multimodal Neural Network Recruited by Expertise with Musical Notation

Science.gov (United States)

Wong, Yetta Kwailing; Gauthier, Isabel

2010-01-01

Prior neuroimaging work on visual perceptual expertise has focused on changes in the visual system, ignoring possible effects of acquiring expert visual skills in nonvisual areas. We investigated expertise for reading musical notation, a skill likely to be associated with multimodal abilities. We compared brain activity in music-reading experts…

Articulated Multimedia Physics, Lesson 3, The Arithmetic of Scientific Notation.

Science.gov (United States)

New York Inst. of Tech., Old Westbury.

As the third lesson of the Articulated Multimedia Physics Course, instructional materials are presented in this study guide. An introductory description is given for scientific notation methods. The subject content is provided in scrambled form, and the use of matrix transparencies is required for students to control their learning process.…

Effects of Music Notation Reinforcement on Aural Memory for Melodies

Science.gov (United States)

Buonviri, Nathan

2015-01-01

The purpose of this study was to investigate effects of music notation reinforcement on aural memory for melodies. Participants were 41 undergraduate and graduate music majors in a within-subjects design. Experimental trials tested melodic memory through a sequence of target melodies, distraction melodies, and matched and unmatched answer choices.…

References and arrow notation instead of join operation in query languages

Directory of Open Access Journals (Sweden)

Alexandr Savinov

2012-10-01

Full Text Available We study properties of the join operation in query languages and describe some of its major drawbacks. We provide strong arguments against using joins as a main construct for retrieving related data elements in general purpose query languages and argue for using references instead. Since conventional references are quite restrictive when applied to data modeling and query languages, we propose to use generalized references as they are defined in the concept-oriented model (COM. These references are used by two new operations, called projection and de-projection, which are denoted by right and left arrows and therefore this access method is referred to as arrow notation. We demonstrate advantages of the arrow notation in comparison to joins and argue that it makes queries simpler, more natural, easier to understand, and the whole query writing process more productive and less error-prone.

ArcForm - A multimodal notation

DEFF Research Database (Denmark)

Allsopp, Benjamin Brink

ArcForm (AF) is a visual notation based on a new graph-like network structure. It supports a unique approach to labeling arcs and nodes to allow diverse and grammatically normal English (or other natural language) sentences to be embedded in the network (Allsopp, 2013). In doing this AF combines...... the familiarity and expressiveness of written natural language with the visuospatial intuition of navigating geographical maps. Thus AF simultaneously exploits visual, textual, linguistic and spatial modalities. In static representations AF seems to have various benefits. We believe that AF’s multiple modalities...... support better overview, aid memory and facilitate forming new insights. At the same time, AF’s closeness to natural language allows it to remain cross-domain and multipurpose. However AF is not limited to static representations and is designed to be supported digitally. Here we expect additional benefits...

A Modular SOS for Action Notation - Revisited

DEFF Research Database (Denmark)

Mosses, Peter David

A draft modular SOS for the new version of AN, referred to as AN-2, has been available since 2000. It is written in CASL and has been checked for well-formedness using CATS (CASL Tool Set). It appears to be significantly more accessible than the original SOS of AN-1. However, it now appears......-notation for the modular SOS rules. After discussing the issues, we look at some illustrative examples taken from an improved modular SOS of AN-2 (in preparation). We also look at the possibility of empirical testing of the modular SOS by a straightforward translation to Prolog....

Preserving Musicality through Pictures: A Linguistic Pathway to Conventional Notation

Science.gov (United States)

Nordquist, Alice L.

2016-01-01

The natural musicality so often present in children's singing can begin to fade as the focus of a lesson shifts to the process of reading and writing conventional notation symbols. Approaching the study of music from a linguistic perspective preserves the pace and flow that is inherent in spoken language and song. SongWorks teaching practices…

The reliability and validity of subjective notational analysis in comparison to global positioning system tracking to assess athlete movement patterns.

Science.gov (United States)

Doğramac, Sera N; Watsford, Mark L; Murphy, Aron J

2011-03-01

Subjective notational analysis can be used to track players and analyse movement patterns during match-play of team sports such as futsal. The purpose of this study was to establish the validity and reliability of the Event Recorder for subjective notational analysis. A course was designed, replicating ten minutes of futsal match-play movement patterns, where ten participants undertook the course. The course allowed a comparison of data derived from subjective notational analysis, to the known distances of the course, and to GPS data. The study analysed six locomotor activity categories, focusing on total distance covered, total duration of activities and total frequency of activities. The values between the known measurements and the Event Recorder were similar, whereas the majority of significant differences were found between the Event Recorder and GPS values. The reliability of subjective notational analysis was established with all ten participants being analysed on two occasions, as well as analysing five random futsal players twice during match-play. Subjective notational analysis is a valid and reliable method of tracking player movements, and may be a preferred and more effective method than GPS, particularly for indoor sports such as futsal, and field sports where short distances and changes in direction are observed.

He led them forth like Sheep Når teksten substituerer den rytmiske notation - en studie i Händels oratorium Israel in Egypt

DEFF Research Database (Denmark)

Topp, Morten

1999-01-01

Handel, Händel, opførelsespraksis, performance practice, rytmisk notation, Israel i Ægypten, Israel in Egypt,......Handel, Händel, opførelsespraksis, performance practice, rytmisk notation, Israel i Ægypten, Israel in Egypt,...

Enlightening symbols a short history of mathematical notation and its hidden powers

CERN Document Server

Mazur, Joseph

2014-01-01

While all of us regularly use basic math symbols such as those for plus, minus, and equals, few of us know that many of these symbols weren't available before the sixteenth century. What did mathematicians rely on for their work before then? And how did mathematical notations evolve into what we know today? In Enlightening Symbols, popular math writer Joseph Mazur explains the fascinating history behind the development of our mathematical notation system. He shows how symbols were used initially, how one symbol replaced another over time, and how written math was conveyed before and after symbols became widely adopted. Traversing mathematical history and the foundations of numerals in different cultures, Mazur looks at how historians have disagreed over the origins of the numerical system for the past two centuries. He follows the transfigurations of algebra from a rhetorical style to a symbolic one, demonstrating that most algebra before the sixteenth century was written in prose or in verse employing the wr...

The 2008 ICOH Workshop on Skin Notation

DEFF Research Database (Denmark)

Sartorelli, P; Ahlers, H W; Cherrie, J W

2010-01-01

BACKGROUND: On 29 March 2008 the International Commission on Occupational Health (ICOH) Scientific Committee on Occupational and Environmental Dermatoses organized a Skin Notation Workshop hosted by the 11th International Percutaneous Penetration Perspectives Conference (La Grande Motte, France...... assignment criteria and the attempts to improve the S system made by various international and governmental agencies. A position paper was subsequently published. OBJECTIVES: The workshop in France was a continuation of this activity with the aim of evaluating how the different strategies can improve S....... METHODS AND DISCUSSION: The Workshop was divided into two sessions. The first was dedicated to lectures focused on different aspects of S. In the second session participants discussed key issues with the aim of exploring the actions needed to improve international S. systems....

Abuse notation of improper integrals

Science.gov (United States)

Arfi, E.; Wiryanto, L. H.

2018-01-01

In the definition of \\int_ab {f(x)dx} , it was assumed that the interval [a, b] was finite. However, in many application in physics, engineering, economics, and probability we wish to allow a or b (or both) to be infinite or for the other case when f has an infinite discontinuity in [a, b]. In either case the integral is called improper integral. Definition of improper integral is the limit of a definite integral as an endpoint of the interval of integration approaches either a specified real number or ∞ or -∞ or, in some cases, as both endpoints approach limits. Many of the first-year students in ITERA learning about improper integrals make an abuse notation like written improper integral just like standard definite integral. Based on this situation, we tried to change the habits of the students in the writing of improper integrals by providing sufficient understanding and considerable exercises. It turns out this way gives good result, based on the percentage of the value of the midterms to the problem of improper integrals give a fairly good percentage value.

Visual syntax does matter: Improving the cognitive effectiveness of the i* visual notation

NARCIS (Netherlands)

Moody, D.L.; Heymans, Patrick; Matulevicius, Raimundas

2010-01-01

Goal-oriented modelling is one of the most important research developments in the requirements engineering (RE) field. This paper conducts a systematic analysis of the visual syntax of i*, one of the leading goal-oriented languages. Like most RE notations, i* is highly visual. Yet surprisingly,

Notat vedr. muligheder for at styrke det faglige niveau i matematik og naturfag

DEFF Research Database (Denmark)

Busch, Henrik; Horst, Sebastian

Dette notat er i foråret 2005 udarbejdet af Henrik Busch og Sebastian Horst for Undervisnings-ministeriet i forbindelse med forberedelsen til Globaliseringsrådets arbejde i efteråret 2005. Notatet er i november 2005 gjort offentligt tilgængeligt efter aftale med Undervisningsministeriet. I den fo...

Mathematical aspects that extend the notion of scientific notation in the area of Physics of General Middle Education

Directory of Open Access Journals (Sweden)

Yohan Godoy

2018-01-01

Full Text Available For this work, a constructivist didactic proposal was designed in which the students of the third year of General Media Education can acquire a significant learning in the use of Scientific Notation. The type of research used is among feasible projects with a non-experimental field design. For data collection, the survey technique was used, which was applied to 43 students of the Physics subject of the third year of the Liceo Rosario Almarza Trujillo-Venezuela. The analysis of the results indicated that they present deficiencies in terms of significant numbers and order magnitude, which are essential mathematical aspects for the understanding and use of Scientific Notation in the area of Physics, as well as highlighting the need for Implement other teaching and learning strategies, such as a series of complementary activities for the teacher in the classroom or the student. In view of these results, a didactic guide was carried out using the known mathematical aspects and various ludic activities to extend the notion and use of scientific notation.

Perceptions of Schooling, Pedagogy and Notation in the Lives of Visually-Impaired Musicians

Science.gov (United States)

Baker, David; Green, Lucy

2016-01-01

This article discusses findings on schooling, pedagogy and notation in the life-experiences of amateur and professional visually-impaired musicians/music teachers, and the professional experiences of sighted music teachers who work with visually-impaired learners. The study formed part of a broader UK Arts and Humanities Research Council funded…

Coordinating Interactions: The Event Coordination Notation

DEFF Research Database (Denmark)

Kindler, Ekkart

models fully automatically with today’s technologies. The focus of today’s code generation technologies, however, is mostly on the structural aspects of the domain; the domain’s behaviour is often not modelled at all, or implemented manually based on some informal models, or the behaviour is modelled...... for the local and the global behaviour define the overall behaviour of the domain. In this technical report, we discuss the main idea and philosophy of ECNO and its notation as well as all the subtle details and concepts - and we motivate the decisions made for its design. Moreover, we discuss the prototypical...... implementation of ECNO, which consists of a modelling environment based on Eclipse and the Eclipse Modeling Framework (EMF) and an execution engine, which fully supports all the concepts and features of ECNO discussed in this technical report. All the examples are based on EMF, but the ECNO Engine can be used...

Calculating the dermal flux of chemicals with OELs based on their molecular structure: An attempt to assign the skin notation.

Science.gov (United States)

Kupczewska-Dobecka, Małgorzata; Jakubowski, Marek; Czerczak, Sławomir

2010-09-01

Our objectives included calculating the permeability coefficient and dermal penetration rates (flux value) for 112 chemicals with occupational exposure limits (OELs) according to the LFER (linear free-energy relationship) model developed using published methods. We also attempted to assign skin notations based on each chemical's molecular structure. There are many studies available where formulae for coefficients of permeability from saturated aqueous solutions (K(p)) have been related to physicochemical characteristics of chemicals. The LFER model is based on the solvation equation, which contains five main descriptors predicted from chemical structure: solute excess molar refractivity, dipolarity/polarisability, summation hydrogen bond acidity and basicity, and the McGowan characteristic volume. Descriptor values, available for about 5000 compounds in the Pharma Algorithms Database were used to calculate permeability coefficients. Dermal penetration rate was estimated as a ratio of permeability coefficient and concentration of chemical in saturated aqueous solution. Finally, estimated dermal penetration rates were used to assign the skin notation to chemicals. Defined critical fluxes defined from the literature were recommended as reference values for skin notation. The application of Abraham descriptors predicted from chemical structure and LFER analysis in calculation of permeability coefficients and flux values for chemicals with OELs was successful. Comparison of calculated K(p) values with data obtained earlier from other models showed that LFER predictions were comparable to those obtained by some previously published models, but the differences were much more significant for others. It seems reasonable to conclude that skin should not be characterised as a simple lipophilic barrier alone. Both lipophilic and polar pathways of permeation exist across the stratum corneum. It is feasible to predict skin notation on the basis of the LFER and other published

The Use of Force Notation to Detect Students' Misconceptions: Mutual Interactions Case

Science.gov (United States)

Serhane, Ahcene; Zeghdaoui, Abdelhamid; Debiache, Mehdi

2017-01-01

Using a conventional notation for representing forces on diagrams, students were presented with questions on the interaction between two objects. The results show that complete understanding of Newton's Third Law of Motion is quite rare, and that some problems relate to misunderstanding which force acts on each body. The use of the terms…

Children's Invented Notations and Verbal Responses to a Piano Work by Claude Debussy

Science.gov (United States)

Elkoshi, Rivka

2015-01-01

This study considers the way children listen to classical music composed for them and the effect of age on their spontaneous invented notations and verbal responses. The musical selection is a piano piece for children by Claude Debussy:"'Jimbo's Lullaby" from "Children's Corner". Two hundred and nine children 4-9.5-years-old…

Precise Quantitative Analysis of Probabilistic Business Process Model and Notation Workflows

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Sharp, Robin

2013-01-01

We present a framework for modeling and analysis of real-world business workflows. We present a formalized core subset of the business process modeling and notation (BPMN) and then proceed to extend this language with probabilistic nondeterministic branching and general-purpose reward annotations...... the entire BPMN language, allow for more complex annotations and ultimately to automatically synthesize workflows by composing predefined subprocesses, in order to achieve a configuration that is optimal for parameters of interest....

Bio-Based Polyurethane Containing Isosorbide for Use in Composites and Coatings

Science.gov (United States)

2015-04-01

ARL-TR-7259 ● APR 2015 US Army Research Laboratory Bio-Based Polyurethane Containing Isosorbide for Use in Composites and...copyright notation hereon. ARL-TR-7259 ● APR 2015 US Army Research Laboratory Bio-Based Polyurethane Containing Isosorbide for Use...4. TITLE AND SUBTITLE Bio-Based Polyurethane Containing Isosorbide for Use in Composites and Coatings 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

Beacon Editor: Capturing Signal Transduction Pathways Using the Systems Biology Graphical Notation Activity Flow Language.

Science.gov (United States)

Elmarakeby, Haitham; Arefiyan, Mostafa; Myers, Elijah; Li, Song; Grene, Ruth; Heath, Lenwood S

2017-12-01

The Beacon Editor is a cross-platform desktop application for the creation and modification of signal transduction pathways using the Systems Biology Graphical Notation Activity Flow (SBGN-AF) language. Prompted by biologists' requests for enhancements, the Beacon Editor includes numerous powerful features for the benefit of creation and presentation.

Methodological disputes about interpretation of neum notation in the 20th century

Directory of Open Access Journals (Sweden)

Peno Vesna

2015-01-01

Full Text Available Until the end of the twentieth century in Byzantine musicological science there were two diametrically opposite approaches to the interpretation of the Byzantine neum notation systems and post-Byzantine music heritage after the Fall of Constantinople. Western European scholars, ignoring the post-Byzantine Chant tradition and the last semeography reform from the early nineteenth century, looked at the problems of the musical past only from the perspective of the Middle Ages. Greek researchers have shared the belief that the condition of an adequate understanding of the mid-Byzantine notation, or the so-called old method, is the knowledge of analytical neum system and theory, the basics of which were set up by musicians from the end of the seventeenth and during the eighteenth century, and were finally shaped by Chrisantos, Gregory and Chourmouzios and officially accepted in the Greek church in 1814. The path to overcoming the issues relating to the development of neum notation, and finding an adequate manner of decoding it, led through the understanding of the phenomenon of "interpretation" and other tendencies that marked the post-Byzantine music practice. Two scientists -the Danish Jørgen Raasted, a follower of the Western European musicological methods established by founders of Monumenta Musicae Byzantinae, and Greek theologist and musicologist Gregory Stathes - are specifically responsible for the reconciliation of the different methodological approaches. After numerous and often heated debates, the Danish scientist eventually largely accepted the views of his Greek counterpart. Moreover, he himself insisted, at the musicological conferences organized during the 1980s, on reviewing the controversial issues: the existence of chromatic intervals in the psalmody of the Middle-Ages, the problem of syllabic and melismatic interpretations of stenographic neum records, and so on. Concerning the above mentioned issues, the contemporary trends in

Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2

Directory of Open Access Journals (Sweden)

Sorokin Anatoly

2015-06-01

Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

Business Process Management Notation (BPMN) as Lingua Franca in Virtual Communities

DEFF Research Database (Denmark)

Tambo, Torben

2017-01-01

processes are carried out through informal as well as formal VCs. In formal organizations, VCs are regarded as dynamic; people or work processes move back and forth between formal business processes and VCs. It is interesting to see how VCs in enterprise landscapes can execute using a common understanding......, a single language or an expression, a lingua franca to transform ideas into knowledge, sustain representation of knowledge, and exchange knowledge with the formal, non-virtual organization. Business Process Management Notation (BPMN) has become commonplace for describing and formalizing regular enterprise...

Notat om arbejdet med innovation i Randers Kommune

DEFF Research Database (Denmark)

Hansen, Morten Balle; Agger Nielsen, Jeppe

2012-01-01

for innovation i Randers Kommune, herunder hvordan politikerne inddrages i innovationsprocessen, 5) Hvor tæt skal økonomi og innovationsdagsorden knyttes? 6) Hvordan er innovationsdagsordenen relateret til en overordnet strategi for Randers Kommune? og 7) selve organiseringen af innovationsprocessen. Notatet...... hovedpunkter er; 1) udarbejdelse af de gode innovationsspørgsmål, 2) dobbeltudfordringen med på den ene side at sikre daglig drift og på den anden side at arbejde innovativt, 3) top-down versus bottom-up processer, dvs. hvor meget skal innovationsprocesserne designes og styres? 4) den særlige kontekst......Dette notat udgør en erfaringsopsamling fra innovationsdag i Randers Kommune, d. 13. november 2012. Notatet fremhæver hovedpointerne fra interne og eksterne oplægsholdere og udpeger en række fokuspunkter/problemstillinger for arbejdet med innovation i Randers Kommune. De syv identificerede...

An Introduction to Equilibrium Thermodynamics: A Rational Approach to Its Teaching. Part 1: Notation and Mathematics.

Science.gov (United States)

Williams, Donald F.; Glasser, David

1991-01-01

Introduces and develops mathematical notation to assist undergraduate students in overcoming conceptual difficulties involving the underlying mathematics of state functions, which tend to be different from functions encountered by students in previous mathematical courses, because of the need to manipulate special types of partial derivatives and…

Refinement from a control problem to program

DEFF Research Database (Denmark)

Schenke, Michael; Ravn, Anders P.

1996-01-01

The distinguishing feature of the presented refinement approach is that it links formalisms from a top level requirements notation down to programs together in a mathematically coherent development trajectory. The approach uses Duration Calculus, a real-time interval logic, to specifyrequirements...

QUANTUM: A Wolfram Mathematica add-on for Dirac Bra-Ket Notation, Non-Commutative Algebra, and Simulation of Quantum Computing Circuits

International Nuclear Information System (INIS)

Muñoz, J L Gómez; Delgado, F

2016-01-01

This paper introduces QUANTUM, a free library of commands of Wolfram Mathematica that can be used to perform calculations directly in Dirac braket and operator notation. Its development started several years ago, in order to study quantum random walks. Later, many other features were included, like operator and commutator algebra, simulation and graphing of quantum computing circuits, generation and solution of Heisenberg equations of motion, among others. To the best of our knowledge, QUANTUM remains a unique tool in its use of Dirac notation, because it is used both in the input and output of the calculations. This work depicts its usage and features in Quantum Computing and Quantum Hamilton Dynamics. (paper)

Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2

Directory of Open Access Journals (Sweden)

Mi Huaiyu

2015-06-01

Full Text Available The Systems Biological Graphical Notation (SBGN is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD, Entity Relationship (ER and Activity Flow (AF, allow for the representation of different aspects of biological and biochemical systems at different levels of detail.

The Effects of Aural versus Notated Instructional Materials on Achievement and Self-Efficacy in Jazz Improvisation

Science.gov (United States)

Watson, Kevin E.

2010-01-01

The purpose of the present study was to investigate the effects of aural versus notated pedagogical materials on achievement and self-efficacy in instrumental jazz improvisation performance. A secondary purpose of this study was to investigate how achievement and self-efficacy may be related to selected experience variables. The sample for the…

HAPS, a Handy Analog Programming System

DEFF Research Database (Denmark)

Højberg, Kristian Søe

1975-01-01

HAPS (Hybrid Analog Programming System) is an analog compiler that can be run on a minicomputer in an interactive mode. Essentially HAPS is written in FORTRAN. The equations to be programmed for an ana log computer are read in by using a FORTRAN-like notation. The input must contain maximum...... and emphasizes the limitations HAPS puts on equation structure, types of computing circuit, scaling, and static testing....

Computer programming and computer systems

CERN Document Server

Hassitt, Anthony

1966-01-01

Computer Programming and Computer Systems imparts a "reading knowledge? of computer systems.This book describes the aspects of machine-language programming, monitor systems, computer hardware, and advanced programming that every thorough programmer should be acquainted with. This text discusses the automatic electronic digital computers, symbolic language, Reverse Polish Notation, and Fortran into assembly language. The routine for reading blocked tapes, dimension statements in subroutines, general-purpose input routine, and efficient use of memory are also elaborated.This publication is inten

The Event Coordination Notation: Behaviour Modelling Beyond Mickey Mouse

DEFF Research Database (Denmark)

Jepsen, Jesper; Kindler, Ekkart

2015-01-01

The Event Coordination Notation (ECNO) allows modelling the desired behaviour of a software system on top of any object-oriented software. Together with existing technologies from Model-based Software Engineering (MBSE) for automatically generating the software for the structural parts, ECNO allows...... special aspect of ECNO or another; and it would be fair to call them “Mickey Mouse examples”. In this paper, we give a concise overview of the motivation, ideas, and concepts of ECNO. More importantly, we discuss a larger system, which was completely generated from the underlying models: a workflow...... management system. This way, we demonstrate that ECNO can be used for modelling software beyond the typical Mickey Mouse examples. This example demonstrates that the essence of workflow management – including its behaviour – can be captured in ECNO: in a sense, it is a domain model of workflow management...

The Role of AP and the Composition Program.

Science.gov (United States)

Mahala, Daniel; Vivion, Michael

1993-01-01

Suggests that most programs have not based their acceptance of advanced placement credit on reasoned endorsement of the views of language, literature, and rhetoric that AP exams present. Criticizes the views implicit in the AP program and shows how they conflict with the goals of one particular college composition program. (RS)

Status of CHAP: composite HTGR analysis program

International Nuclear Information System (INIS)

Secker, P.A.; Gilbert, J.S.

1975-12-01

Development of an HTGR accident simulation program is in progress for the prediction of the overall HTGR plant transient response to various initiating events. The status of the digital computer program named CHAP (Composite HTGR Analysis Program) as of June 30, 1975, is given. The philosophy, structure, and capabilities of the CHAP code are discussed. Mathematical descriptions are given for those HTGR components that have been modeled. Component model validation and evaluation using auxiliary analysis codes are also discussed

Read the poem in “ese mar único, infinitesimal, llamado oído”. Notation of a triumph

Directory of Open Access Journals (Sweden)

María Eugenia Rasic

2016-09-01

Full Text Available Drawing form musical theory, this paper aims to offer a musical reading of two works by Argentine poet Arturo Carrera: Children's Corners (1989 and Las cuatro estaciones [The Four Seasons] (2008. Beyond the intertextuality, and we could also say, the “intersonority”, with the pieces composed by Debussy, in the first case, and Vivaldi, in the second, this reading allow us to critically reflect on two complex theoretical notions that intersect both artistic experiences: time –which appears as a remain and as rhythm–  and space –which appears both in the idea of musical notation and in the simultaneous construction of the poem. Moreover, since this intersection is also methodological, another compelling issue is to show that what was read and heard with the musical notation of the early twentieth century was precisely the fantasy of beating the directionality of progressive time, the time of the century. How to write then the triumph of the progressive directionality of time? Which senses does this writing touch in Arturo Carrera’s work?

Visual Meta-Programming Notation

National Research Council Canada - National Science Library

Auguston, Mikhail

2001-01-01

...), encapsulation means for hierarchical rules design, two-dimensional data-flow diagrams for rules, visual control constructs for conditionals and iteration, default mapping results to reduce real...

"The Spiral Model for the Development of Coordination": A Learning Model Based on Eshkol-Wachman Movement Notation (EWMN)

Science.gov (United States)

Al-Dor, Nira

2006-01-01

The objective of this study is to present "The Spiral Model for the Development of Coordination" (SMDC), a learning model that reflects the complexity and possibilities embodied in the learning of movement notation Eshkol-Wachman (EWMN), an Israeli invention. This model constituted the infrastructure for a comprehensive study that examined the…

ASN.1 notation for exchange of data in computer-based railway control systems

Directory of Open Access Journals (Sweden)

Zbigniew ŁUKASIK

2009-01-01

Full Text Available Development of railway control systems aims at computerization. In most cases these systems are Distributed Real Time Systems. However, a huge problem in their putting into practice is the lack of interface standardization in the range of data structures and information exchange methods. It results in a variety of solutions, and thus in problems concerning cooperation of systems that come from different software vendors. Specification of protocols for data exchanging applications should therefore be created with the use of generally accepted standards. One of them is ASN.1 (Abstract Syntax Notation One language, which shall be presented in this article.

Causal Mechanism Graph - A new notation for capturing cause-effect knowledge in software dependability

International Nuclear Information System (INIS)

Huang, Fuqun; Smidts, Carol

2017-01-01

Understanding cause-effect relations between concepts in software dependability engineering is fundamental to various research or industrial activities. Cognitive maps are traditionally used to elicit and represent such knowledge; however they seem incapable of accurately representing complex causal mechanisms in dependability engineering. This paper proposes a new notation called Causal Mechanism Graph (CMG) to elicit and represent the cause-effect domain knowledge embedded in experts’ minds or described in the literature. CMG contains a new set of symbols elicited from domain experts to capture the recurring interaction mechanisms between multiple concepts in software dependability engineering. Furthermore, compared to major existing graphic methods, CMG is particularly robust and suitable for mental knowledge elicitation: it allows one to represent the full range of cause-effect knowledge, accurately or fuzzily as one sees fit depending on the depth of knowledge he/she has. This feature combined with excellent reliability and validity poses CMG as a promising method that has the potential to be used in various areas, such as software dependability requirement elicitation, software dependability assessment and dependability risk control. - Highlights: • A new notation CMG for capturing cause-effect conceptual knowledge in software dependability. • CMG is particularly robust and suitable for mental knowledge representation. • CMG is a visual representation that bridges mental knowledge, natural and mathematical language. • CMG possesses excellent representation capability, validity and inter-coder reliability. • CMG is a fundamental method for various areas in dependability engineering.

A Relational Algebra Query Language for Programming Relational Databases

Science.gov (United States)

McMaster, Kirby; Sambasivam, Samuel; Anderson, Nicole

2011-01-01

In this paper, we describe a Relational Algebra Query Language (RAQL) and Relational Algebra Query (RAQ) software product we have developed that allows database instructors to teach relational algebra through programming. Instead of defining query operations using mathematical notation (the approach commonly taken in database textbooks), students…

DISCO: An object-oriented system for music composition and sound design

Energy Technology Data Exchange (ETDEWEB)

Kaper, H. G.; Tipei, S.; Wright, J. M.

2000-09-05

This paper describes an object-oriented approach to music composition and sound design. The approach unifies the processes of music making and instrument building by using similar logic, objects, and procedures. The composition modules use an abstract representation of musical data, which can be easily mapped onto different synthesis languages or a traditionally notated score. An abstract base class is used to derive classes on different time scales. Objects can be related to act across time scales, as well as across an entire piece, and relationships between similar objects can replicate traditional music operations or introduce new ones. The DISCO (Digital Instrument for Sonification and Composition) system is an open-ended work in progress.

Optical Music Recognition for Scores Written in White Mensural Notation

Directory of Open Access Journals (Sweden)

Tardón LorenzoJ

2009-01-01

Full Text Available An Optical Music Recognition (OMR system especially adapted for handwritten musical scores of the XVII-th and the early XVIII-th centuries written in white mensural notation is presented. The system performs a complete sequence of analysis stages: the input is the RGB image of the score to be analyzed and, after a preprocessing that returns a black and white image with corrected rotation, the staves are processed to return a score without staff lines; then, a music symbol processing stage isolates the music symbols contained in the score and, finally, the classification process starts to obtain the transcription in a suitable electronic format so that it can be stored or played. This work will help to preserve our cultural heritage keeping the musical information of the scores in a digital format that also gives the possibility to perform and distribute the original music contained in those scores.

HAL/SM language specification. [programming languages and computer programming for space shuttles

Science.gov (United States)

Williams, G. P. W., Jr.; Ross, C.

1975-01-01

A programming language is presented for the flight software of the NASA Space Shuttle program. It is intended to satisfy virtually all of the flight software requirements of the space shuttle. To achieve this, it incorporates a wide range of features, including applications-oriented data types and organizations, real time control mechanisms, and constructs for systems programming tasks. It is a higher order language designed to allow programmers, analysts, and engineers to communicate with the computer in a form approximating natural mathematical expression. Parts of the English language are combined with standard notation to provide a tool that readily encourages programming without demanding computer hardware expertise. Block diagrams and flow charts are included. The semantics of the language is discussed.

Elastic properties of uniaxial-fiber reinforced composites - General features

Science.gov (United States)

Datta, Subhendu; Ledbetter, Hassel; Lei, Ming

The salient features of the elastic properties of uniaxial-fiber-reinforced composites are examined by considering the complete set of elastic constants of composites comprising isotropic uniaxial fibers in an isotropic matrix. Such materials exhibit transverse-isotropic symmetry and five independent elastic constants in Voigt notation: C(11), C(33), C(44), C(66), and C(13). These C(ij) constants are calculated over the entire fiber-volume-fraction range 0.0-1.0, using a scattered-plane-wave ensemple-average model. Some practical elastic constants such as the principal Young moduli and the principal Poisson ratios are considered, and the behavior of these constants is discussed. Also presented are the results for the four principal sound velocities used to study uniaxial-fiber-reinforced composites: v(11), v(33), v(12), and v(13).

Writing as a Design Discipline: Exploring the Relationship between Composition and Programming.

Science.gov (United States)

Walton, Richard E.; Balestri, Diane

1987-01-01

Examines similarities between composition and programming processes, and reviews two studies that linked instruction in computer programming and freshman composition to help students understand writing as a design discipline. Projects at the University of Montana and Bryn Mawr College which improved students' writing abilities are described. (LRW)

Industry to Education Technical Transfer Program & Composite Materials. Composite Materials Course. Fabrication I Course. Fabrication II Course. Composite Materials Testing Course. Final Report.

Science.gov (United States)

Massuda, Rachel

These four reports provide details of projects to design and implement courses to be offered as requirements for the associate degree program in composites and reinforced plastics technology. The reports describe project activities that led to development of curricula for four courses: composite materials, composite materials fabrication I,…

Improving the composition of voluntary programs in the category of Women in fitness

Directory of Open Access Journals (Sweden)

Iryna Bilenka

2018-04-01

Full Text Available Purpose: to reveal the basic directions of perfection of construction of compositions of voluntary programs in the category of Women in fitness. Material & Methods: judges-experts analyzed the structure and content of voluntary competitive programs of performances of six female athletes'-finalists of the championship of Ukraine on bodybuilding and fitness in 2016. Results: voluntary programs include elements of structural groups of varying complexity: "acrobatic", "choreographic", "strength" and "flexibility"; female athletes with better indicators in the quantitative analysis of competitive compositions received higher grades for performance; the results of athletes for an arbitrary program are directly proportional to the number of complex elements in the composition. Conclusions: in an voluntary program in women's fitness for a competitive result affects the saturation of the program, the variety and complexity of the elements.

Java programming fundamentals problem solving through object oriented analysis and design

CERN Document Server

Nair, Premchand S

2008-01-01

While Java texts are plentiful, it's difficult to find one that takes a real-world approach, and encourages novice programmers to build on their Java skills through practical exercise. Written by an expert with 19 experience teaching computer programming, Java Programming Fundamentals presents object-oriented programming by employing examples taken from everyday life. Provides a foundation in object-oriented design principles and UML notation Describes common pitfalls and good programming practicesFurnishes supplemental links, documents, and programs on its companion website, www.premnair.netU

Codecharts roadmaps and blueprints for object-oriented programs

CERN Document Server

Eden, Amnon H

2011-01-01

NEW LANGUAGE VISUALIZES PROGRAM ABSTRACTIONS CLEARLY AND PRECISELY Popular software modelling notations visualize implementation minutiae but fail to scale, to capture design abstractions, and to deliver effective tool support. Tailored to overcome these limitations, Codecharts can elegantly model roadmaps and blueprints for Java, C++, and C# programs of any size clearly, precisely, and at any level of abstraction. More practically, significant productivity gains for programmers using tools supporting Codecharts have been demonstrated in controlled experiments. Hundreds of figures a

A carbon-carbon composite materials development program for fusion energy applications

International Nuclear Information System (INIS)

Burchell, T.D.; Eatherly, W.P.; Engle, G.B.; Hollenberg, G.W.

1992-10-01

Carbon-carbon composites increasingly are being used for plasma-facing component (PFC) applications in magnetic-confinement plasma-fusion devices. They offer substantial advantages such as enhanced physical and mechanical properties and superior thermal shock resistance compared to the previously favored bulk graphite. Next-generation plasma-fusion reactors, such as the International Thermonuclear Experimental Reactor (ITER) and the Burning Plasma Experiment (BPX), will require advanced carbon-carbon composites possessing extremely high thermal conductivity to manage the anticipated extreme thermal heat loads. This report outlines a program that will facilitate the development of advanced carbon-carbon composites specifically tailored to meet the requirements of ITER and BPX. A strategy for developing the necessary associated design data base is described. Materials property needs, i.e., high thermal conductivity, radiation stability, tritium retention, etc., are assessed and prioritized through a systems analysis of the functional, operational, and component requirements for plasma-facing applications. The current Department of Energy (DOE) Office of Fusion Energy Program on carbon-carbon composites is summarized. Realistic property goals are set based upon our current understanding. The architectures of candidate PFC carbon-carbon composite materials are outlined, and architectural features considered desirable for maximum irradiation stability are described. The European and Japanese carbon-carbon composite development and irradiation programs are described. The Working Group conclusions and recommendations are listed. It is recommended that developmental carbon-carbon composite materials from the commercial sector be procured via request for proposal/request for quotation (RFP/RFQ) as soon as possible

SCORE DIGITAL TECHNOLOGY: THE CONVERGENCE

Directory of Open Access Journals (Sweden)

Chernyshov Alexander V.

2013-12-01

Full Text Available Explores the role of digital scorewriters in today's culture, education, and music industry and media environment. The main principle of the development of software is not only publishing innovation (relating to the sheet music, and integration into the area of composition, arrangement, education, creative process for works based on digital technology (films, television and radio broadcasting, Internet, audio and video art. Therefore the own convergence of musically-computer technology is a total phenomenon: notation program combined with means MIDI-sequencer, audio and video editor. The article contains the unique interview with the creator of music notation processors.

Effects of high-intensity strength interval training program on body composition

OpenAIRE

Juránková, Michaela; Bílý, Jiří; Hrazdíra, Eduard

2015-01-01

The aim of this work was to examine effects of 10-week high-intensity strength interval training (HIIT) program on body composition. Seven women (31.0 ± 6.0 years old, 65.7 ± 9.8 kg body weight, 23.6 ± 2.8 kg*m−2 BMI, 18.6 ± 5.8 kg body fat, 26.0 ± 3.4 kg muscle mass) completed intervention program. We performed an analyze of body composition before and after training program. We focused especially on body fat and muscle mass. Each session consisted of short term bouts (until 30 s duration) w...

Mechanically programmed shape change in laminated elastomeric composites.

Science.gov (United States)

Robertson, Jaimee M; Torbati, Amir H; Rodriguez, Erika D; Mao, Yiqi; Baker, Richard M; Qi, H Jerry; Mather, Patrick T

2015-07-28

Soft, anisotropic materials, such as myocardium in the heart and the extracellular matrix surrounding cells, are commonly found in nature. This anisotropy leads to specialized responses and is imperative to material functionality, yet few soft materials exhibiting similar anisotropy have been developed. Our group introduced an anisotropic shape memory elastomeric composite (A-SMEC) composed of non-woven, aligned polymer fibers embedded in an elastomeric matrix. The composite exhibited shape memory (SM) behavior with significant anisotropy in room-temperature shape fixing. Here, we exploit this anisotropy by bonding together laminates with oblique anisotropy such that tensile deformation at room temperature - mechanical programming - results in coiling. This response is a breakthrough in mechanical programming, since non-affine shape change is achieved by simply stretching the layered A-SMECs at room temperature. We will show that pitch and curvature of curled geometries depend on fiber orientations and the degree of strain programmed into the material. To validate experimental results, a model was developed that captures the viscoplastic response of A-SMECs. Theoretical results correlated well with experimental data, supporting our conclusions and ensuring attainability of predictable curling geometries. We envision these smart, soft, shape changing materials will have aerospace and medical applications.

Exploring the association between visual perception abilities and reading of musical notation.

Science.gov (United States)

Lee, Horng-Yih

2012-06-01

In the reading of music, the acquisition of pitch information depends primarily upon the spatial position of notes as well as upon an individual's spatial processing ability. This study investigated the relationship between the ability to read single notes and visual-spatial ability. Participants with high and low single-note reading abilities were differentiated based upon differences in musical notation-reading abilities and their spatial processing; object recognition abilities were then assessed. It was found that the group with lower note-reading abilities made more errors than did the group with a higher note-reading abilities in the mental rotation task. In contrast, there was no apparent significant difference between the two groups in the object recognition task. These results suggest that note-reading may be related to visual spatial processing abilities, and not to an individual's ability with object recognition.

Productive Parallel Programming: The PCN Approach

Directory of Open Access Journals (Sweden)

Ian Foster

1992-01-01

Full Text Available We describe the PCN programming system, focusing on those features designed to improve the productivity of scientists and engineers using parallel supercomputers. These features include a simple notation for the concise specification of concurrent algorithms, the ability to incorporate existing Fortran and C code into parallel applications, facilities for reusing parallel program components, a portable toolkit that allows applications to be developed on a workstation or small parallel computer and run unchanged on supercomputers, and integrated debugging and performance analysis tools. We survey representative scientific applications and identify problem classes for which PCN has proved particularly useful.

Effects of programmed physical activity on body composition in post-pubertal schoolchildren.

Science.gov (United States)

Farias, Edson Dos Santos; Gonçalves, Ezequiel Moreira; Morcillo, André Moreno; Guerra-Júnior, Gil; Amancio, Olga Maria Silverio

2015-01-01

To assess body composition modifications in post-pubertal schoolchildren after practice of a physical activity program during one school year. The sample consisted of 386 students aged between 15 and 17 years and divided into two groups: the study group (SG) comprised 195 students and the control group (CG), 191. The SG was submitted to a physical activity program and the CG attended conventional physical education classes. Body composition was assessed using body mass index (BMI), percentage of body fat (%BF), fat mass (FM), and lean mass (LM). A positive effect of the physical activity program on body composition in the SG (pgenders. A reduction in %BF (mean of differences = -5.58%) and waist circumference (-2.33 cm), as well as an increase in LM (+2.05 kg) were observed in the SG for both genders, whereas the opposite was observed in the CG. The practice of programmed physical activity promotes significant reduction of body fat in post-pubertal schoolchildren. Copyright © 2013 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

PNGS-A unit 4 composite graphite valve packing program

International Nuclear Information System (INIS)

Meaney, F.

1992-01-01

During the outage of Pickering 4 for retubing and rehabilitation, a composite graphite packing program was completed on 100 conventional valves and 50 nuclear valves. This paper describes component refurbishment, related maintenance, and manpower requirements. 2 figs

Dynamic Impact Testing and Model Development in Support of NASA's Advanced Composites Program

Science.gov (United States)

Melis, Matthew E.; Pereira, J. Michael; Goldberg, Robert; Rassaian, Mostafa

2018-01-01

The purpose of this paper is to provide an executive overview of the HEDI effort for NASA's Advanced Composites Program and establish the foundation for the remaining papers to follow in the 2018 SciTech special session NASA ACC High Energy Dynamic Impact. The paper summarizes the work done for the Advanced Composites Program to advance our understanding of the behavior of composite materials during high energy impact events and to advance the ability of analytical tools to provide predictive simulations. The experimental program carried out at GRC is summarized and a status on the current development state for MAT213 will be provided. Future work will be discussed as the HEDI effort transitions from fundamental analysis and testing to investigating sub-component structural concept response to impact events.

HRT-UML: a design method for hard real-time systems based on the UML notation

Science.gov (United States)

D'Alessandro, Massimo; Mazzini, Silvia; di Natale, Marco; Lipari, Giuseppe

2002-07-01

The Hard Real-Time-Unified Modelling Language (HRT-UML) method aims at providing a comprehensive solution to the modeling of Hard Real Time systems. The experience shows that the design of Hard Real-Time systems needs methodologies suitable for the modeling and analysis of aspects related to time, schedulability and performance. In the context of the European Aerospace community a reference method for design is Hierarchical Object Oriented Design (HOOD) and in particular its extension for the modeling of hard real time systems, Hard Real-Time-Hierarchical Object Oriented Design (HRT-HOOD), recommended by the European Space Agency (ESA) for the development of on-board systems. On the other hand in recent years the Unified Modelling Language (UML) has been gaining a very large acceptance in a wide range of domains, all over the world, becoming a de-facto international standard. Tool vendors are very active in this potentially big market. In the Aerospace domain the common opinion is that UML, as a general notation, is not suitable for Hard Real Time systems, even if its importance is recognized as a standard and as a technological trend in the near future. These considerations suggest the possibility of replacing the HRT-HOOD method with a customized version of UML, that incorporates the advantages of both standards and complements the weak points. This approach has the clear advantage of making HRT-HOOD converge on a more powerful and expressive modeling notation. The paper identifies a mapping of the HRT-HOOD semantics into the UML one, and proposes a UML extension profile, that we call HRT-UML, based on the UML standard extension mechanisms, to fully represent HRT-HOOD design concepts. Finally it discusses the relationships between our profile and the UML profile for schedulability, performance and time, adopted by OMG in November 2001.

Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2.

Science.gov (United States)

Sorokin, Anatoly; Le Novère, Nicolas; Luna, Augustin; Czauderna, Tobias; Demir, Emek; Haw, Robin; Mi, Huaiyu; Moodie, Stuart; Schreiber, Falk; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Entity Relationship language (ER) represents biological entities and their interactions and relationships within a network. SBGN ER focuses on all potential relationships between entities without considering temporal aspects. The nodes (elements) describe biological entities, such as proteins and complexes. The edges (connections) provide descriptions of interactions and relationships (or influences), e.g., complex formation, stimulation and inhibition. Among all three languages of SBGN, ER is the closest to protein interaction networks in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

Effects of programmed physical activity on body composition in post-pubertal schoolchildren

Directory of Open Access Journals (Sweden)

Edson dos Santos Farias

2015-04-01

Full Text Available OBJECTIVE: To assess body composition modifications in post-pubertal schoolchildren after practice of a physical activity program during one school year. METHODS: The sample consisted of 386 students aged between 15 and 17 years and divided into two groups: the study group (SG comprised 195 students and the control group (CG, 191. The SG was submitted to a physical activity program and the CG attended conventional physical education classes. Body composition was assessed using body mass index (BMI, percentage of body fat (%BF, fat mass (FM, and lean mass (LM. RESULTS: A positive effect of the physical activity program on body composition in the SG (p < 0.001 was observed, as well as on the interaction time x group in all the variables analyzed in both genders. A reduction in %BF (mean of differences = -5.58% and waist circumference (-2.33 cm, as well as an increase in LM (+2.05 kg were observed in the SG for both genders, whereas the opposite was observed in the CG. CONCLUSION: The practice of programmed physical activity promotes significant reduction of body fat in post-pubertal schoolchildren.

Modelling operations and security of cloud systems using Z-notation and Chinese Wall security policy

Science.gov (United States)

Basu, Srijita; Sengupta, Anirban; Mazumdar, Chandan

2016-11-01

Enterprises are increasingly using cloud computing for hosting their applications. Availability of fast Internet and cheap bandwidth are causing greater number of people to use cloud-based services. This has the advantage of lower cost and minimum maintenance. However, ensuring security of user data and proper management of cloud infrastructure remain major areas of concern. Existing techniques are either too complex, or fail to properly represent the actual cloud scenario. This article presents a formal cloud model using the constructs of Z-notation. Principles of the Chinese Wall security policy have been applied to design secure cloud-specific operations. The proposed methodology will enable users to safely host their services, as well as process sensitive data, on cloud.

QUEUING ANALYSIS OF CAR SERVICING CUSTOMERS USED SINGLE CHANNEL MODEL AND KENDALL'S NOTATION IN PT. ARMADA MOBIL PURWOKERTO

Directory of Open Access Journals (Sweden)

Tugiyono

2013-04-01

Full Text Available This study aims to identify the customer’s problem queue, specify the model queue, the arrival and customer service frequency distributions at PT. Armada Mobil Purwokerto. Methods of the research conducted by observing and measuring directly the research object, the data from the study was calculated according to the theory of queues. The result appropriate to single channel queuing model Poisson distribution of the arrivals, exponential distribution of the time service. The characteristized of Kendall’s notation is M/M/3/3/571.

The simplex method of linear programming

CERN Document Server

Ficken, Frederick A

1961-01-01

This concise but detailed and thorough treatment discusses the rudiments of the well-known simplex method for solving optimization problems in linear programming. Geared toward undergraduate students, the approach offers sufficient material for readers without a strong background in linear algebra. Many different kinds of problems further enrich the presentation. The text begins with examinations of the allocation problem, matrix notation for dual problems, feasibility, and theorems on duality and existence. Subsequent chapters address convex sets and boundedness, the prepared problem and boun

A Case Study of Some Issues in the Optimization of Fortran 90 Array Notation

Directory of Open Access Journals (Sweden)

John D. McCalpin

1996-01-01

Full Text Available Some issues in the relationship of coding style and compiler optimization are discussed with regard to Fortran 90 array notation. A review of several important Fortran 90 array constructs and their performance on vector and scalar hardware sets the stage for a more detailed example based on the kernel of a finite difference computational fluid dynamics model, specifically the nonlinear shallow water equations. Special attention is paid to the optimization of memory use and memory traffic. It is shown that the style of coding interacts with the rules of Fortran 90 and the current state of the art of Fortran 90 compilers to produce a fairly wide range of performance levels. Although performance degradations are typically small, a few cases of more serious loss of effciency are identified and discussed.

Industry to Education Technology Transfer Program. Composite Materials--Personnel Development. Final Report.

Science.gov (United States)

Tomezsko, Edward S. J.

A composite materials education program was established to train Boeing Helicopter Company employees in the special processing of new filament-reinforced polymer composite materials. During the personnel development phase of the joint Boeing-Penn State University project, an engineering instructor from Penn State completed a 5-month, full-time…

Visualization of independence and dependence for program concurrency

International Nuclear Information System (INIS)

Belady, L.A.; Hosokawa, K.

1984-01-01

In order to fully utilize the CRT device's dynamic and two dimensional capabilities, a new way of thinking about programs and an associated notation are proposed. The scheme permits the explicit indication of the program's potential for parallel execution. The image created by the programmer on the screen provides the compiler with sequencing and concurrency information, while at the same time serves as a visual feedback to the programmer. So far the way of programming in two dimensions is just an idea and has not yet been tried either on a real life problem or by employing real life programmers. The authors are attempting a quick implementation in the form of a front end to an existing language

Scaffold: Quantum Programming Language

Science.gov (United States)

2012-07-24

following notation: datatype variablename; where “ datatype ” is the type of the variable and “variablename” is the name of the variable. Valid primitive... datatypes include the same datatypes commonly used in C, such as int, char, float, etc. A classical variable is referenced using its name. Users may also...casts between datatypes can be done using the C casting notation (parentheses around a datatype preceding a variable). For example, the following code

Composite materials research and education program: The NASA-Virginia Tech composites program

Science.gov (United States)

Herakovich, C. T.

1980-01-01

Major areas of study include: (1) edge effects in finite width laminated composites subjected to mechanical, thermal and hygroscopic loading with temperature dependent material properties and the influence of edge effects on the initiation of failure; (2) shear and compression testing of composite materials at room and elevated temperatures; (3) optical techniques for precise measurement of coefficients of thermal expansion of composites; (4) models for the nonlinear behavior of composites including material nonlinearity and damage accumulation and verification of the models under biaxial loading; (5) compressive failure of graphite/epoxy plates with circular holes and the buckling of composite cylinders under combined compression and torsion; (6) nonlinear mechanical properties of borsic/aluminum, graphite/polyimide and boron/aluminum; (7) the strength characteristics of spliced sandwich panels; and (8) curved graphite/epoxy panels subjected to internal pressure.

Analysis of Logic Programs Using Regular Tree Languages

DEFF Research Database (Denmark)

Gallagher, John Patrick

2012-01-01

The eld of nite tree automata provides fundamental notations and tools for reasoning about set of terms called regular or recognizable tree languages. We consider two kinds of analysis using regular tree languages, applied to logic programs. The rst approach is to try to discover automatically...... a tree automaton from a logic program, approximating its minimal Herbrand model. In this case the input for the analysis is a program, and the output is a tree automaton. The second approach is to expose or check properties of the program that can be expressed by a given tree automaton. The input...... to the analysis is a program and a tree automaton, and the output is an abstract model of the program. These two contrasting abstract interpretations can be used in a wide range of analysis and verication problems....

Model Checking JAVA Programs Using Java Pathfinder

Science.gov (United States)

Havelund, Klaus; Pressburger, Thomas

2000-01-01

This paper describes a translator called JAVA PATHFINDER from JAVA to PROMELA, the "programming language" of the SPIN model checker. The purpose is to establish a framework for verification and debugging of JAVA programs based on model checking. This work should be seen in a broader attempt to make formal methods applicable "in the loop" of programming within NASA's areas such as space, aviation, and robotics. Our main goal is to create automated formal methods such that programmers themselves can apply these in their daily work (in the loop) without the need for specialists to manually reformulate a program into a different notation in order to analyze the program. This work is a continuation of an effort to formally verify, using SPIN, a multi-threaded operating system programmed in Lisp for the Deep-Space 1 spacecraft, and of previous work in applying existing model checkers and theorem provers to real applications.

Computer program determines chemical composition of physical system at equilibrium

Science.gov (United States)

Kwong, S. S.

1966-01-01

FORTRAN 4 digital computer program calculates equilibrium composition of complex, multiphase chemical systems. This is a free energy minimization method with solution of the problem reduced to mathematical operations, without concern for the chemistry involved. Also certain thermodynamic properties are determined as byproducts of the main calculations.

Requirements Modeling with the Aspect-oriented User Requirements Notation (AoURN): A Case Study

Science.gov (United States)

Mussbacher, Gunter; Amyot, Daniel; Araújo, João; Moreira, Ana

The User Requirements Notation (URN) is a recent ITU-T standard that supports requirements engineering activities. The Aspect-oriented URN (AoURN) adds aspect-oriented concepts to URN, creating a unified framework that allows for scenario-based, goal-oriented, and aspect-oriented modeling. AoURN is applied to the car crash crisis management system (CCCMS), modeling its functional and non-functional requirements (NFRs). AoURN generally models all use cases, NFRs, and stakeholders as individual concerns and provides general guidelines for concern identification. AoURN handles interactions between concerns, capturing their dependencies and conflicts as well as the resolutions. We present a qualitative comparison of aspect-oriented techniques for scenario-based and goal-oriented requirements engineering. An evaluation carried out based on the metrics adapted from literature and a task-based evaluation suggest that AoURN models are more scalable than URN models and exhibit better modularity, reusability, and maintainability.

International symposium on in vivo body composition studies: Program and abstracts

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

This booklet contains the program and individual abstracts for papers presented at the International symposium on in vivo body composition studies. The presentations were divided into five sessions. Individual abstracts were indexed for the Energy Data Base. (DT)

CHAP: a composite nuclear plant simulation program applied to the 3000 MW(t) HTGR

International Nuclear Information System (INIS)

Secker, P.A.; Bailey, P.G.; Gilbert, J.S.; Willcutt, G.J.E. Jr.; Vigil, J.C.

1977-01-01

The Composite HTGR Analysis Program (CHAP) is a general systems analysis program which has been developed at LASL. The program is being used for simulating large HTGR nuclear power plant operation and accident transients. The general features and analytical methods of the CHAP program are discussed. Features of the large HTGR model and results of model transients are also presented

Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

Science.gov (United States)

Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

Holistic processing of musical notation: Dissociating failures of selective attention in experts and novices.

Science.gov (United States)

Wong, Yetta Kwailing; Gauthier, Isabel

2010-12-01

Holistic processing (i.e., the tendency to process objects as wholes) is associated with face perception and also with expertise individuating novel objects. Surprisingly, recent work also reveals holistic effects in novice observers. It is unclear whether the same mechanisms support holistic effects in experts and in novices. In the present study, we measured holistic processing of music sequences using a selective attention task in participants who vary in music-reading expertise. We found that holistic effects were strategic in novices but were relatively automatic in experts. Correlational analyses revealed that individual holistic effects were predicted by both individual music-reading ability and neural responses for musical notation in the right fusiform face area (rFFA), but in opposite directions for experts and novices, suggesting that holistic effects in the two groups may be of different natures. To characterize expert perception, it is important not only to measure the tendency to process objects as wholes, but also to test whether this effect is dependent on task constraints.

Complexity VIII. Ontology of closure in complex systems: The C* hypothesis and the O° notation

Science.gov (United States)

Chandler, Jerry LR

1999-03-01

Closure is a common characteristic of mathematical, natural and socio-cultural systems. Whether one is describing a graph, a molecule, a cell, a human, or a nation state, closure is implicitly understood. An objective of this paper is to continue a construction of a systematic framework for closure which is sufficient for future quantitative transdisciplinary investigations. A further objective is to extend the Birkhoff-von Neumann criterion for quantum systems to complex natural objects. The C* hypothesis is being constructed to be consistent with algebraic category theory (Ehresmann and Vanbremeersch, 1987, 1997, Chandler, 1990, 1991, Chandler, Ehresmann and Vanbremeersch, 1996). Five aspects of closure will be used to construct a framework for categories of complex systems: 1. Truth functions in mathematics and the natural sciences 2. Systematic descriptions in the mks and O° notations 3. Organizational structures in hierarchical scientific languages 4. Transitive organizational pathways in the causal structures of complex behaviors 5. Composing additive, multiplicative and exponential operations in complex systems Truth functions can be formal or objective or subjective, depending on the complexity of the system and on our capability to represent the fine structure of the system symbolically, observationally or descriptively. "Complete" material representations of the fine structure of a system may allow truth functions to be created over sets of one to one correspondences. Less complete descriptions can support less stringent truth functions based on coherence or subjective judgments. The role of human values in creating and perpetuating truth functions can be placed in context of the degree of fine structure in the system's description. The organization of complex systems are hypothesized to be categorizable into degrees relative to one another, thereby creating an ordering relationship. This ordering relationship is denoted by the symbols: O°1, O°2,O°3

DETERMINING THE COMPOSITION OF HIGH TEMPERATURE COMBUSTION PRODUCTS OF FOSSIL FUEL BASED ON VARIATIONAL PRINCIPLES AND GEOMETRIC PROGRAMMING

Directory of Open Access Journals (Sweden)

Velibor V Vujović

2011-01-01

Full Text Available This paper presents the algorithm and results of a computer program for calculation of complex equilibrium composition for the high temperature fossil fuel combustion products. The method of determining the composition of high temperatures combustion products at the temperatures appearing in the open cycle MHD power generation is given. The determination of combustion product composition is based on minimization of the Gibbs free energy. The number of equations to be solved is reduced by using variational principles and a method of geometric programming and is equal to the sum of the numbers of elements and phases. A short description of the computer program for the calculation of the composition and an example of the results are also given.

Exercise program affects body composition but not weight in postmenopausal women

NARCIS (Netherlands)

Velthuis, M.J.; Schuit, A.J.; Peeters, P.H.; Monninkhof, E.M.

2009-01-01

OBJECTIVE: The aim of this study was to investigate the effect of a 12-month moderate-to-vigorous exercise program combining aerobic and muscle strength training on body composition among sedentary, postmenopausal women. METHODS: A randomized controlled trial was conducted. A total of 189 sedentary

Using Wild Olives in Breeding Programs: Implications on Oil Quality Composition

Directory of Open Access Journals (Sweden)

Lorenzo León

2018-02-01

Full Text Available A wide genetic diversity has been reported for wild olives, which could be particularly interesting for the introgression of some agronomic traits and resistance to biotic and abiotic stresses in breeding programs. However, the introgression of some beneficial wild traits may be paralleled by negative effects on some other important agronomic and quality traits. From the quality point of view, virgin olive oil (VOO from olive cultivars is highly appreciated for its fatty acid composition (high monounsaturated oleic acid content and the presence of several minor components. However, the composition of VOO from wild origin and its comparison with VOO from olive cultivars has been scarcely studied. In this work, the variability for fruit characters (fruit weight and oil content, OC, fatty acid composition, and minor quality components (squalene, sterols and tocopherols content and composition was studied in a set of plant materials involving three different origins: wild genotypes (n = 32, cultivars (n = 62 and genotypes belonging to cultivar × wild progenies (n = 62. As expected, values for fruit size and OC in wild olives were lower than those obtained in cultivated materials, with intermediate values for cultivar × wild progenies. Wild olives showed a remarkably higher C16:0 percentage and tocopherol content in comparison to the cultivars. Contrarily, lower C18:1 percentage, squalene and sterol content were found in the wild genotypes, while no clear differences were found among the different plant materials regarding composition of the tocopherol and phytosterol fractions. Some common highly significant correlations among components of the same chemical family were found in all groups of plant materials. However, some other correlations were specific for one of the groups. The results of the study suggested that the use of wild germplasm in olive breeding programs will not have a negative impact on fatty acid composition, tocopherol content

Kidney transplantation process in Brazil represented in business process modeling notation.

Science.gov (United States)

Peres Penteado, A; Molina Cohrs, F; Diniz Hummel, A; Erbs, J; Maciel, R F; Feijó Ortolani, C L; de Aguiar Roza, B; Torres Pisa, I

2015-05-01

Kidney transplantation is considered to be the best treatment for people with chronic kidney failure, because it improves the patients' quality of life and increases their length of survival compared with patients undergoing dialysis. The kidney transplantation process in Brazil is defined through laws, decrees, ordinances, and resolutions, but there is no visual representation of this process. The aim of this study was to analyze official documents to construct a representation of the kidney transplantation process in Brazil with the use of business process modeling notation (BPMN). The methodology for this study was based on an exploratory observational study, document analysis, and construction of process diagrams with the use of BPMN. Two rounds of validations by specialists were conducted. The result includes the kidney transplantation process in Brazil representation with the use of BPMN. We analyzed 2 digital documents that resulted in 2 processes with 45 total of activities and events, 6 organizations involved, and 6 different stages of the process. The constructed representation makes it easier to understand the rules for the business of kidney transplantation and can be used by the health care professionals involved in the various activities within this process. Construction of a representation with language appropriate for the Brazilian lay public is underway. Copyright © 2015 Elsevier Inc. All rights reserved.

The Glasgow Parallel Reduction Machine: Programming Shared-memory Many-core Systems using Parallel Task Composition

Directory of Open Access Journals (Sweden)

Ashkan Tousimojarad

2013-12-01

Full Text Available We present the Glasgow Parallel Reduction Machine (GPRM, a novel, flexible framework for parallel task-composition based many-core programming. We allow the programmer to structure programs into task code, written as C++ classes, and communication code, written in a restricted subset of C++ with functional semantics and parallel evaluation. In this paper we discuss the GPRM, the virtual machine framework that enables the parallel task composition approach. We focus the discussion on GPIR, the functional language used as the intermediate representation of the bytecode running on the GPRM. Using examples in this language we show the flexibility and power of our task composition framework. We demonstrate the potential using an implementation of a merge sort algorithm on a 64-core Tilera processor, as well as on a conventional Intel quad-core processor and an AMD 48-core processor system. We also compare our framework with OpenMP tasks in a parallel pointer chasing algorithm running on the Tilera processor. Our results show that the GPRM programs outperform the corresponding OpenMP codes on all test platforms, and can greatly facilitate writing of parallel programs, in particular non-data parallel algorithms such as reductions.

Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

Directory of Open Access Journals (Sweden)

Mohd Razelan Intan Suhana

2017-01-01

Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

MAXIMSUPER: a computer program to assist in the design of multifilamentary superconducting composites

International Nuclear Information System (INIS)

Hoard, R.W.; Scanlan, R.M.; Hirzel, D.G.

1979-01-01

The strain degradation of critical current density has been analytically and experimentally investigated for multifilamentary superconducting composites produced in a bronze core geometry. Analytic results were obtained from a computer program (MAXIMSUPER) which predicts the stresses and strains in composites as a result of thermal and axial loading. Tensile test data for Nb 3 Sn are described. It is believed that the strain dependence of the critical current found in Nb 3 Sn is due to strain enhanced martensitic transformation

Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2.

Science.gov (United States)

Mi, Huaiyu; Schreiber, Falk; Moodie, Stuart; Czauderna, Tobias; Demir, Emek; Haw, Robin; Luna, Augustin; Le Novère, Nicolas; Sorokin, Anatoly; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Activity Flow language represents the influences of activities among various entities within a network. Unlike SBGN PD and ER that focus on the entities and their relationships with others, SBGN AF puts the emphasis on the functions (or activities) performed by the entities, and their effects to the functions of the same or other entities. The nodes (elements) describe the biological activities of the entities, such as protein kinase activity, binding activity or receptor activity, which can be easily mapped to Gene Ontology molecular function terms. The edges (connections) provide descriptions of relationships (or influences) between the activities, e.g., positive influence and negative influence. Among all three languages of SBGN, AF is the closest to signaling pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

A notational analysis of elite tennis serve and serve-return strategies on slow surface.

Science.gov (United States)

Gillet, Eric; Leroy, David; Thouvarecq, Régis; Stein, Jean-François

2009-03-01

A notational analysis of singles events at the French Open Grand Slam tournament was undertaken in 2005 and 2006 to characterize the game patterns and strategies of serve and serve-return and to determine their influence on the point issue on a clay court surface. One hundred sixteen men's singles matches were video analyzed. The flat serve (57.6%), particularly down the "T" location (50.3%), allowed servers to win significantly more points than the topspin (24.1%) and slice serves (18.3%). When the topspin was the first serve strategy, servers kept a high percentage of points won from the serve (52.4%). This strategy was essentially used on the second serve (91.6%) by playing the "T" location in the deuce court and the wide zone in the advantage court. Returns to the central zone allowed receivers to win more points (73.3% on first serve and 65.9% on second serve) than plays to external locations. The results highlight the high impact of the first shots of all opponents on the rally. Even on clay, the slowest court surface, serves and serve-returns remain the strokes that most influence the match results in modern tennis games.

An after-school exercise program improves fitness, and body composition in elementary school children.

Science.gov (United States)

Carrel, Aaron L; Logue, Julie; Deininger, Heidi; Clark, R Randall; Curtis, Vanessa; Montague, Paul; Baldwin, Sharon

2011-07-01

Reduced cardiovascular fitness (CVF) is a risk factor for obesity and cardiovascular disease. It has previously shown that a school-based fitness curriculum can improve CVF, and other health indicators in middle school aged children. Whether an afterschool program improves CVF and other health markers in elementary-school children is unresolved. The objective of this study was therefore to determine whether an on-site afterschool-based fitness program improves body composition, cardiovascular fitness level, in elementary school children. 80 elementary school children were evaluated in a "fitness-oriented" afterschool program managed by the local YMCA. Children underwent evaluation of cardiovascular fitness by maximal VO 2 treadmill testing and body composition by dual x-ray absorptiometry (DXA), at baseline (prior to the school-year) and again at end of the school year. Findings revealed that, at baseline, children had a mean age of 8.8 years, BMI of 18.7± 3, with a maximal VO 2 of 40.03 ± 7.6 ml/kg/min, and percent body fat of 28.7 ± 7%. After a 9-month intervention, children maximal VO 2 increased to 44.8 ± 7.5 ml/kg/min (p=0.04) and percent body fat decreased to 25.8 ± 6.2% (p=0.033). The study concluded that on-site afterschool programming focusing on fitness improved body composition and cardiovascular fitness, in elementary school children. Combined with prior studies, these data demonstrate that afterschool-based fitness curricula can benefit both obese and non-obese children. It was therefore recommended that, partnerships with schools to promote fitness even outside of school time should be a part of a school approach to improving children's health.

Algebraic formulas for some nontrivial U/sub n/ 6j symbols and U/sub m/n contains U/sub m/ x U/sub n/ 3jm symbols

International Nuclear Information System (INIS)

Haase, R.W.; Butler, P.H.

1985-01-01

We give tables of algebraic formulas for some nontrivial 6j symbols and 3jm symbols of the unitary groups. The tables demonstrate that the building-up method can be used successfully to obtain the rank dependence of unitary group j and jm symbols. To emphasize the rank-dependent nature of this calculation, we have employed the composite Young tableaux notation (or back-to-back notation) to label the unitary group irreps. In using this notation, the transpose conjugate symmetry of the corresponding composite Young diagram leads to a new symmetry of the unitary group 6j and 3jm symbols. The transposition of the groups U/sub m/ and U/sub n/ gives rise to a further symmetry of the 3jm symbols of U/sub m/n contains U/sub m/ x U/sub n/

Floating Foundations: "Kairos," Community, and a Composition Program in Post-Katrina New Orleans

Science.gov (United States)

Johnson, T. R.; Letter, Joe; Livingston, Judith Kemerait

2009-01-01

The authors describe their individual and collective experiences reconstructing their New Orleans-based university composition program in the aftermath of Hurricane Katrina. They emphasize how the concept of "floating foundations" helps account for changes in their students' interests, and they suggest that this idea is applicable to the…

NASA Small Business Innovation Research Program. Composite List of Projects, 1983 to 1989

Science.gov (United States)

1990-01-01

The NASA SBIR Composite List of Projects, 1983 to 1989, includes all projects that have been selected for support by the Small Business Innovation Research (SBIR) Program of NASA. The list describes 1232 Phase 1 and 510 Phase 2 contracts that had been awarded or were in negotiation for award in August 1990. The main body is organized alphabetically by name of the small businesses. Four indexes cross-reference the list. The objective of this listing is to provide information about the SBIR program to anyone concerned with NASA research and development activities.

Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

Science.gov (United States)

McBride, Bonnie J.; Gordon, Sanford

1996-01-01

This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

Distributed computer systems theory and practice

CERN Document Server

Zedan, H S M

2014-01-01

Distributed Computer Systems: Theory and Practice is a collection of papers dealing with the design and implementation of operating systems, including distributed systems, such as the amoeba system, argus, Andrew, and grapevine. One paper discusses the concepts and notations for concurrent programming, particularly language notation used in computer programming, synchronization methods, and also compares three classes of languages. Another paper explains load balancing or load redistribution to improve system performance, namely, static balancing and adaptive load balancing. For program effici

“And Thou, all-Shaking Thunder…”A Theological Notation to Lines 1–38 of King Lear, Act III, Scene II

Directory of Open Access Journals (Sweden)

William C. Hackett

2017-05-01

Full Text Available In the dramas of Shakespeare, the madman and the fool speak in prose; wisdom and sanity are properly poeticised. King Lear is no exception: I go some way in providing a theological notation to a crucial moment of Lear’s descent into madness, the fracturing of his blank verse into prose. Is the storm on the heath a representation of the turmoil of his mind? Or is it a theophany, the manifestation of divine displeasure at human foolishness? Finding between the verse and the prose the theological tradition of Christianity will allow us to negotiate this question and to understand a little more clearly the peculiar wisdom of poetry for Christianity.

The Novel Attempt for Finding Minimum Solution in Fuzzy Neutrosophic Relational Geometric Programming (FNRGP with (max,min Composition

Directory of Open Access Journals (Sweden)

Huda E. Khalid

2016-08-01

Full Text Available This article sheds light on the possibility of finding the minimum solution set of neutrosophic relational geometric programming with (max, min composition. This work examines the privacy enjoyed by both neutrosophic logic and geometric programming, and how it affects the minimum solutions.

Position coding effects in a 2D scenario: the case of musical notation.

Science.gov (United States)

Perea, Manuel; García-Chamorro, Cristina; Centelles, Arnau; Jiménez, María

2013-07-01

How does the cognitive system encode the location of objects in a visual scene? In the past decade, this question has attracted much attention in the field of visual-word recognition (e.g., "jugde" is perceptually very close to "judge"). Letter transposition effects have been explained in terms of perceptual uncertainty or shared "open bigrams". In the present study, we focus on note position coding in music reading (i.e., a 2D scenario). The usual way to display music is the staff (i.e., a set of 5 horizontal lines and their resultant 4 spaces). When reading musical notation, it is critical to identify not only each note (temporal duration), but also its pitch (y-axis) and its temporal sequence (x-axis). To examine note position coding, we employed a same-different task in which two briefly and consecutively presented staves contained four notes. The experiment was conducted with experts (musicians) and non-experts (non-musicians). For the "different" trials, the critical conditions involved staves in which two internal notes that were switched vertically, horizontally, or fully transposed--as well as the appropriate control conditions. Results revealed that note position coding was only approximate at the early stages of processing and that this encoding process was modulated by expertise. We examine the implications of these findings for models of object position encoding. Copyright © 2013 Elsevier B.V. All rights reserved.

Architectural Design Support for Composition & Superimposition

NARCIS (Netherlands)

Gurp, Jilles van; Smedinga, Rein; Bosch, Jan

2002-01-01

The ever growing size and complexity of software systems is making it increasingly harder to build systems that both meet current and future requirements. During architecture design, a lot of important design decisions are taken. In this paper, we present an architecture design notation based on

Composition: Berceuse with Tango & Fan Shapes

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

2017-01-01

For piano solo. Musical contents deal with pluralism in the form of quotations and stylistic clashes, improvisation and graphic notation - related to musical and visual works by the Danish composer Gunnar Berg (1909-1989). Through the video one can gain an impression of the score in glimpses....

MASBAL: A computer program for predicting the composition of nuclear waste glass produced by a slurry-fed ceramic melter

International Nuclear Information System (INIS)

Reimus, P.W.

1987-07-01

This report is a user's manual for the MASBAL computer program. MASBAL's objectives are to predict the composition of nuclear waste glass produced by a slurry-fed ceramic melter based on a knowledge of process conditions; to generate simulated data that can be used to estimate the uncertainty in the predicted glass composition as a function of process uncertainties; and to generate simulated data that can be used to provide a measure of the inherent variability in the glass composition as a function of the inherent variability in the feed composition. These three capabilities are important to nuclear waste glass producers because there are constraints on the range of compositions that can be processed in a ceramic melter and on the range of compositions that will be acceptable for disposal in a geologic repository. MASBAL was developed specifically to simulate the operation of the West Valley Component Test system, a commercial-scale ceramic melter system that will process high-level nuclear wastes currently stored in underground tanks at the site of the Western New York Nuclear Services Center (near West Valley, New York). The program is flexible enough, however, to simulate any slurry-fed ceramic melter system. 4 refs., 16 figs., 5 tabs

Development of APDL program for analysis of composite material multicell beams

International Nuclear Information System (INIS)

Tariq, M.M.; Pasha, M.; Ahmed, M.N.; Munir, A.

2011-01-01

Comparison of finite elements and comparison of ANSYS with MSC Patran Nastran, for analysis of composite material multicell beams, is the main idea of this paper. The Finite Element Analysis (FEA) is a valuable tool of modeling and simulation in development, processing, production and application of modern hi-tech materials and structures for reliable design. Multicell beams have important industrial applications in the automotive and aerospace sectors. ANSYS Parametric Design Language (APDL) is an important language in parametric modeling and analysis of structures with simple to complex geometry. Its major advantage is virtual prototyping which can be used to analyze and compare different materials. This work introduces core techniques required for APDL using the case study of composite multicell beams subjected to constrained torsional loading. The published results using MSC NASTRAN have been verified using ANSYS and the corresponding arising issues and notes are the focus of this research study. The details of geometry, material and boundary conditions have been explained in order to construct Finite Element (FE) model. This FE model was simulated several times in ANSYS by the authors using various options of APDL language. A step-wise flowchart was used to detect and reduce problems in iterations of analysis in APDL programming. Results of FEA largely depend on FE model and software used. These issues become prominent while trying to verify results of MSC NASTRAN with ANSYS. The author has introduced three error criteria to select an equivalent finite element of one FEA package (ANSYS) for an equivalent element of other FEA package (MSC NASTRAN). These criteria are the relative error criterion, the absolute error criterion and the combined error criterion. The results from this research provide an insight into finite elements for reliability in design of composite materials. The practical milestones for research to develop FE model and APDL programs related

Separating Business Logic from Medical Knowledge in Digital Clinical Workflows Using Business Process Model and Notation and Arden Syntax.

Science.gov (United States)

de Bruin, Jeroen S; Adlassnig, Klaus-Peter; Leitich, Harald; Rappelsberger, Andrea

2018-01-01

Evidence-based clinical guidelines have a major positive effect on the physician's decision-making process. Computer-executable clinical guidelines allow for automated guideline marshalling during a clinical diagnostic process, thus improving the decision-making process. Implementation of a digital clinical guideline for the prevention of mother-to-child transmission of hepatitis B as a computerized workflow, thereby separating business logic from medical knowledge and decision-making. We used the Business Process Model and Notation language system Activiti for business logic and workflow modeling. Medical decision-making was performed by an Arden-Syntax-based medical rule engine, which is part of the ARDENSUITE software. We succeeded in creating an electronic clinical workflow for the prevention of mother-to-child transmission of hepatitis B, where institution-specific medical decision-making processes could be adapted without modifying the workflow business logic. Separation of business logic and medical decision-making results in more easily reusable electronic clinical workflows.

URSULA2 computer program. Volume 3. User's manual. Final report

International Nuclear Information System (INIS)

Singhal, A.K.

1980-01-01

This report is intended to provide documentation for the users of the URSULA2 code so that they can appreciate its important features such as: code structure, flow chart, grid notations, coding style, usage of secondary storage and its interconnection with the input preparation program (Reference H3201/4). Subroutines and subprograms have been divided into four functional groups. The functions of all subroutines have been explained with particular emphasis on the control subroutine (MAIN) and the data input subroutine (BLOCK DATA). Computations for the flow situations similar to the reference case can be performed simply by making alterations in BLOCK DATA. Separate guides for the preparation of input data and for the interpretation of program output have been provided. Furthermore, two appendices; one for the URSULA2 listing and the second for the glossary of FORTRAN variables, are included to make this report self-sufficient

Towards programming languages for genetic engineering of living cells.

Science.gov (United States)

Pedersen, Michael; Phillips, Andrew

2009-08-06

Synthetic biology aims at producing novel biological systems to carry out some desired and well-defined functions. An ultimate dream is to design these systems at a high level of abstraction using engineering-based tools and programming languages, press a button, and have the design translated to DNA sequences that can be synthesized and put to work in living cells. We introduce such a programming language, which allows logical interactions between potentially undetermined proteins and genes to be expressed in a modular manner. Programs can be translated by a compiler into sequences of standard biological parts, a process that relies on logic programming and prototype databases that contain known biological parts and protein interactions. Programs can also be translated to reactions, allowing simulations to be carried out. While current limitations on available data prevent full use of the language in practical applications, the language can be used to develop formal models of synthetic systems, which are otherwise often presented by informal notations. The language can also serve as a concrete proposal on which future language designs can be discussed, and can help to guide the emerging standard of biological parts which so far has focused on biological, rather than logical, properties of parts.

A formal MIM specification and tools for the common exchange of MIM diagrams: an XML-Based format, an API, and a validation method.

Science.gov (United States)

Luna, Augustin; Karac, Evrim I; Sunshine, Margot; Chang, Lucas; Nussinov, Ruth; Aladjem, Mirit I; Kohn, Kurt W

2011-05-17

The Molecular Interaction Map (MIM) notation offers a standard set of symbols and rules on their usage for the depiction of cellular signaling network diagrams. Such diagrams are essential for disseminating biological information in a concise manner. A lack of software tools for the notation restricts wider usage of the notation. Development of software is facilitated by a more detailed specification regarding software requirements than has previously existed for the MIM notation. A formal implementation of the MIM notation was developed based on a core set of previously defined glyphs. This implementation provides a detailed specification of the properties of the elements of the MIM notation. Building upon this specification, a machine-readable format is provided as a standardized mechanism for the storage and exchange of MIM diagrams. This new format is accompanied by a Java-based application programming interface to help software developers to integrate MIM support into software projects. A validation mechanism is also provided to determine whether MIM datasets are in accordance with syntax rules provided by the new specification. The work presented here provides key foundational components to promote software development for the MIM notation. These components will speed up the development of interoperable tools supporting the MIM notation and will aid in the translation of data stored in MIM diagrams to other standardized formats. Several projects utilizing this implementation of the notation are outlined herein. The MIM specification is available as an additional file to this publication. Source code, libraries, documentation, and examples are available at http://discover.nci.nih.gov/mim.

An Analysis of Programming Beginners' Source Programs

Science.gov (United States)

Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

The production of animations was made the subject of a university programming course in order to make students understand the process of program creation, and so that students could tackle programming with interest. In this paper, the formats and composition of the programs which students produced were investigated. As a result, it was found that there were a lot of problems related to such matters as how to use indent, how to apply comments and functions etc. for the format and the composition of the source codes.

Benefit of modelling regarding the quality and efficiency of PLC-programming in process automation; Nutzen von Modellierung fuer die Qualitaet und Effizienz der Steuerungsprogrammierung in der Automatisierungstechnik

Energy Technology Data Exchange (ETDEWEB)

Friedrich, D; Vogel-Heuser, B [Bergische Univ. Wuppertal (Germany). Lehrstuhl fuer Automatisierungstechnik/Prozessinformatik

2006-03-15

Software development in process automation has many deficiencies in procedures, notations and tool support. As a result, modern software engineering concepts and notations, like object oriented approaches or UML, are not wide spread in this field. Hence, drawbacks regarding start-up times, additional costs and low software quality are immense. This paper will evaluate the benefit of modelling as a design step prior to coding, regarding cognitive paradigms. Two modelling notations (UML and ICL) will be compared analyzing their impact on the quality of automation software written in IEC 61131. (orig.)

Acuidade visual: Medidas e notações Visual acuity: Measurements and notations

Directory of Open Access Journals (Sweden)

Harley E. A. Bicas

2002-06-01

Full Text Available Avaliações da função visual são muito complexas por dependerem de mecanismos aferentes, eferentes e cognitivos, além de fatores externos à pessoa examinada, como o tipo de estímulo e o de sua apresentação. O exame da acuidade visual é discutido em seus aspectos formais de definições, quantificações (critérios de medição de um ângulo e tamanho dos optotipos, notações (decimal ou fracionárias, escalas (representando relações angulares, lineares, logarítmicas e unidades em que os valores são expressos (recíproca do minuto de arco, número puro, freqüência espacial, decibéis e oitavas. Como conseqüência, referências numéricas sobre a acuidade visual e operações que as envolvem (p.ex., cálculo de valores médios, determinação de variações, relações entre elas podem levar a interpretações muito diferentes e até opostas num mesmo estudo, dependendo dos critérios nele empregados.Evaluations of the visual function are very intricate since they depend on afferent, efferent and cognitive mechanisms, besides external factors of the examined subject, such as the type of the stimulus and of its presentation. Testing the visual acuity is discussed in its formal aspects related to definitions, quantifications (criteria for the measurements of an angle, size of optotypes, notations (decimal or fractionary, scales (representing angular, linear or logarithmic relationships and units in which the values are expressed (reciprocal of minutes of arc, pure number, spacial frequency, decibels, octaves. As a consequence, numerical references about visual acuity and respective operations (e.g., calculations of average values, determinations of variations, relationships between them may lead to very different interpretations of a study, sometimes even opposite, according to the criteria which are used.

Changes in body composition in heart failure patients after a resistance exercise program and branched chain amino acid supplementation.

Science.gov (United States)

Pineda-Juárez, Juan Antonio; Sánchez-Ortiz, Néstor Alonso; Castillo-Martínez, Lilia; Orea-Tejeda, Arturo; Cervantes-Gaytán, Rocío; Keirns-Davis, Candace; Pérez-Ocampo, Carlos; Quiroz-Bautista, Karla; Tenorio-Dupont, Mónica; Ronquillo-Martínez, Alberto

2016-02-01

Heart Failure (HF) is a complex syndrome, which can include the physiological, neural hormonal and metabolic complications known as "Cardiac Cachexia" (CC). In the development of CC there is a release of catabolic cytokines (Tumor Necrosis Factor-α, interleukins 1 and 6) that cause a decrease of fat free mass and fat mass. These changes in body composition might be reversed with a therapeutic combination of resistance exercise and branched chain amino acid supplementation (BCAA). Evaluate changes in body composition after a resistance exercise program and BCAA supplementation in patients with HF. In a randomized clinical trial with 3 month of follow-up anthropometric body composition analysis and stress tests were evaluated at the beginning and in the end of the study. Patients were divided into two groups; the experimental group performed the resistance exercise program and received 10 g/day BCAA supplementation, and the control group only performed the resistance exercise program. Both groups were provided with individualized diets and conventional medical treatment. Changes were found in hip circumference between the groups (p = 0.02), and muscle strength was increased in the experimental group (8%) and the control group (11.4%) with no difference between them. METS and VO2Max also increased in experimental and control groups (16.6% and 50.1% respectively). Regarding changes in symptoms, improvements in fatigue (45.4%), decubitus intolerance (21.8%) and dyspnea (25.4%) were observed in the overall sample. Improvements in physical and functional capacities are attributed to resistance exercise program but not to the BCAA supplementation. NCT02240511. Copyright © 2015 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Instant MuseScore

CERN Document Server

Shinn, Maxwell

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. Instant MuseScore is written in an easy-to follow format, packed with illustrations that will help you get started with this music composition software.This book is for musicians who would like to learn how to notate music digitally with MuseScore. Readers should already have some knowledge about musical terminology; however, no prior experience with music notation software is necessary.

A Generator for Composition Interpreters

DEFF Research Database (Denmark)

Steensgaard-Madsen, Jørgen

1997-01-01

programming language design, specification and implementation then apply. A component can be considered as defining objects or commands according to convenience. A description language including type information provides sufficient means to describe component interaction according to the underlying abstract......Composition of program components must be expressed in some language, and late composition can be achieved by an interpreter for the composition language. A suitable notion of component is obtained by identifying it with the semantics of a generalised structured command. Experiences from...

Advanced organic composite materials for aircraft structures: Future program

Science.gov (United States)

1987-01-01

Revolutionary advances in structural materials have been responsible for revolutionary changes in all fields of engineering. These advances have had and are still having a significant impact on aircraft design and performance. Composites are engineered materials. Their properties are tailored through the use of a mix or blend of different constituents to maximize selected properties of strength and/or stiffness at reduced weights. More than 20 years have passed since the potentials of filamentary composite materials were identified. During the 1970s much lower cost carbon filaments became a reality and gradually designers turned from boron to carbon composites. Despite progress in this field, filamentary composites still have significant unfulfilled potential for increasing aircraft productivity; the rendering of advanced organic composite materials into production aircraft structures was disappointingly slow. Why this is and research and technology development actions that will assist in accelerating the application of advanced organic composites to production aircraft is discussed.

CREST : a computer program for the calculation of composition dependent self-shielded cross-sections

International Nuclear Information System (INIS)

Kapil, S.K.

1977-01-01

A computer program CREST for the calculation of the composition and temperature dependent self-shielded cross-sections using the shielding factor approach has been described. The code includes the editing and formation of the data library, calculation of the effective shielding factors and cross-sections, a fundamental mode calculation to generate the neutron spectrum for the system which is further used to calculate the effective elastic removal cross-sections. Studies to explore the sensitivity of reactor parameters to changes in group cross-sections can also be carried out by using the facility available in the code to temporarily change the desired constants. The final self-shielded and transport corrected group cross-sections can be dumped on cards or magnetic tape in a suitable form for their direct use in a transport or diffusion theory code for detailed reactor calculations. The program is written in FORTRAN and can be accommodated in a computer with 32 K work memory. The input preparation details, sample problem and the listing of the program are given. (author)

Continuous Fiber Ceramic Composite (CFCC) Program: Gaseous Nitridation

Energy Technology Data Exchange (ETDEWEB)

R. Suplinskas G. DiBona; W. Grant

2001-10-29

Textron has developed a mature process for the fabrication of continuous fiber ceramic composite (CFCC) tubes for application in the aluminum processing and casting industry. The major milestones in this project are System Composition; Matrix Formulation; Preform Fabrication; Nitridation; Material Characterization; Component Evaluation

Correction of heterogeneities in the issue compositions in the construction plans optimized in radiotherapy using linear programming

International Nuclear Information System (INIS)

Viana, Rodrigo Sartorelo S.; Lima, Ernesto A.B.F.; Florentino, Helenice de Oliveira; Fonseca, Paulo Roberto da; Homem, Thiago Pedro Donadon

2009-01-01

Linear programming models are widely found in the literature addressing various aspects involved in the creation of optimized planning for radiotherapy. However, most mathematical formulations does not incorporate certain factors that are of extreme importance for the formulation of a real planning like the attenuation of the beam of radiation and heterogeneity in the composition of tissue irradiated. In this context are proposed in this paper some modifications in the formulation of a linear programming problem with the objective of making the simulation closer to the real planning for radiotherapy and thus enable a more reliable and comprehensive planning requirements. (author)

The impact of a 12-week resistance training program on strength, body composition, and self-concept of Hispanic adolescents.

Science.gov (United States)

Velez, Amelia; Golem, Devon L; Arent, Shawn M

2010-04-01

Current evidence suggests that a resistance training program may be physically and psychologically beneficial for adolescents. The purpose of this study was to examine the effects of a structured resistance training program on strength, body composition, and self-concept in normal and overweight Hispanic adolescents. Male and female participants (n = 28; 16.1 +/- 0.2 y; 164.5 +/- 1.4 cm; 63.3 +/- 2.5 kg; 20.0 +/- 1.7% body fat [BF]) were recruited from a predominantly Hispanic high school. Prior to the 12-week program, strength, body composition, and self-concept were assessed. Subjects were randomly assigned to a control group (CON; n = 15) or to a resistance training group (RT; n = 13) that participated in supervised strength training 3 days/week. All measures were repeated at the end of the 12-week program. RT had significantly greater strength increases for bench press (p increased %BF. RT had an increase in condition/stamina competence (p = 0.008), attractive body adequacy (p = 0.017), and global self-worth (p = 0.013) from pretest to posttest, whereas no change was observed for CON. In conclusion, resistance training resulted in significant physiological and psychological improvements in Hispanic adolescents compared to typical school-based activities. These findings indicate that resistance training can be incorporated into the activities of Hispanic adolescents to promote improved health and fitness.

Aspect-Oriented Programming using Composition Filters

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1998-01-01

Software engineers may experience problems in modeling certain aspects while applying object-oriented techniques [4, 10, 11]. Composition-Filters are capable of expressing various different kinds of aspects in a uniform manner. These aspects are, for example, inheritance and delegation [1] and

Diderot: a Domain-Specific Language for Portable Parallel Scientific Visualization and Image Analysis.

Science.gov (United States)

Kindlmann, Gordon; Chiw, Charisee; Seltzer, Nicholas; Samuels, Lamont; Reppy, John

2016-01-01

Many algorithms for scientific visualization and image analysis are rooted in the world of continuous scalar, vector, and tensor fields, but are programmed in low-level languages and libraries that obscure their mathematical foundations. Diderot is a parallel domain-specific language that is designed to bridge this semantic gap by providing the programmer with a high-level, mathematical programming notation that allows direct expression of mathematical concepts in code. Furthermore, Diderot provides parallel performance that takes advantage of modern multicore processors and GPUs. The high-level notation allows a concise and natural expression of the algorithms and the parallelism allows efficient execution on real-world datasets.

The Effect of a Comprehensive Lifestyle Modification Program on Glycemic Control and Body Composition in Patients with Type 2 Diabetes

Directory of Open Access Journals (Sweden)

Ji-Soo Yoo, PhD, RN

2007-09-01

Conclusion: CLMP is a useful program, and its multiple approaches by nurses as the leaders and coordinators appear to have positive and synergistic roles in improving and maintaining stable glucose level and body composition in patients with type 2 diabetes.

Effects of a 2-Year Supervised Exercise Program Upon the Body Composition and Muscular Performance of HIV-Infected Patients

Science.gov (United States)

Paes, Lorena da Silva; Borges, Juliana Pereira; dos Santos, Fernanda Monteiro; de Oliveira, Taciana Pinto; Dupin, Jaciara Gomes; Harris, Elizabeth Assumpção; Farinatti, Paulo

2015-01-01

Background : There is a lack of research investigating long-term effects of exercise training upon the body composition and muscle function in HIV-infected patients (PHIV). The study investigated the influence of a 2-year supervised exercise program on body composition and strength of PHIV under highly active antiretroviral therapy (HAART). Methods : A training program including aerobic, strength and flexibility exercises was performed by 27 PHIV (17 men/ 10 women; age: 48.7±7.0 years; HAART: 150.7±65.3 months) during 1 year and 18 PHIV (10 men/ 8 women; age: 50.6±5.2 years; HAART: 176.6±53.1 months) during 2 years. Body composition and knee isokinetic strength were assessed at baseline and at the end of each year of intervention. Results : Body composition remained stable along the whole experiment vs baseline (1-year - total muscle mass: Δ men=1.1%, P=0.21; Δ women=1.4%, P=0.06; trunk fat: Δ men=-0.1%, P=0.65; Δ women=-1.5%, P=0.45; 2 years - total muscle mass: Δ men=2.7%, P=0.54; Δ women=-1.9%, P=0.71; trunk fat: Δ men=4.4%, P=0.96; Δ women=10.0%, P=0.30). After 1-year, peak torque increased in men (Δ extension=4.2%, P=0.01; Δ flexion=12.2%, P=0.04) and total work reduced in women (Δ extension=-15.4%, P=0.01, Δ flexion=-17.5%, P=0.05). All strength markers remained stable vs baseline after 2 years of intervention (P>0.05). Only men showed significant reduction in the risk of disability due to sarcopenia (P=0.05) after 1 year of intervention, which remained stable after 2 years. Conclusion : Long-term exercise training preserved strength and muscle mass in PHIV under HAART. Exercise programs should be part of HIV therapy to prevent sarcopenia of this population along the years. Trial Registration : ACTRN12610000683033; UTN U1111-1116-4416. PMID:26587076

A Review Of Nutritional Guidelines And Menu Compositions For School Feeding Programs In 12 Countries.

Directory of Open Access Journals (Sweden)

Ruzky eAliyar

2015-08-01

Full Text Available Study objectives: To analyze the nutritional guidelines and menu compositions of school meal provision in various different countries.Background: School feeding is the provision of food on-site or to take home, which aims to increase school enrolment, attendance and retention, and exist as a social safety net for households with very low income. Home-grown school feeding (HGSF, additionally, aims to stimulate local economies by providing a source of income for local smallholder farmers. Methods: Literature searches using the Ovid MEDLINE databases, gathered information from in-country stakeholders, and accessed the programme websites of various countries. Nutrient composition of these menus was calculated from nutritional guidelines and menu compositions using a nutrition linear programming tool (NUTVAL.Country comparisons: School feeding aims differ between countries of each income group. The implementation, delivery of service and nutritional content of foods also differ considerably between countries and income groups. In high-income countries, guidelines and standards have been recommended in an attempt to combat rising levels of overweight and obesity, and to model healthier lifestyle habits. In low-income countries there is a gap in terms of guidance on nutrition standards and menu composition.Conclusions: Provision of evidence-based guidance on nutrition standards to middle and low income countries who have recently established or are planning to establish school feeding has the potential to greatly enhance and improve the quality of service and improve the life of millions of children worldwide.

Shape memory-based tunable resistivity of polymer composites

Energy Technology Data Exchange (ETDEWEB)

Luo, Hongsheng, E-mail: hongshengluo@163.com [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Zhou, Xingdong; Ma, Yuanyuan [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Yi, Guobin, E-mail: ygb116@163.com [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Cheng, Xiaoling [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Zhu, Yong [Shanghai Hiend Polyurethane Inc., No. 389, Jinshan District, Shanghai (China); Zu, Xihong; Zhang, Nanjun; Huang, Binghao; Yu, Lifang [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China)

2016-02-15

Graphical abstract: Hybrid nanofillers of the CNTs and AgNPs were embedded into a shape memory polyurethane. The composites exhibited tunable conduction, which could be facially tailored by the compositions and the thermal–mechanical programming. - Highlights: • Electrically conductive polymer composites in bi-layer structure were fabricated. • The CNTs/AgNPs layer had influence on the mechanics and thermal transitions. • The conductivity could be facially tailored via a thermo-mechanical programming. • The AgNPs contents enlarged the gauge factor of the resistivity–strain curves. • Tunneling theory was suitable for simulating the strain-dependent behaviors. - Abstract: A conductive composite in bi-layer structure was fabricated by embedding hybrid nanofillers, namely carbon nanotubes (CNTs) and silver nanoparticles (AgNPs), into a shape memory polyurethane (SMPU). The CNT/AgNP-SMPU composites exhibited a novel tunable conductivity which could be facially tailored in wide range via the compositions or a specifically designed thermo-mechanical shape memory programming. The morphologies of the conductive fillers and the composites were investigated by scanning electron microscope (SEM). The mechanical and thermal measurements were performed by tensile tests and differential scanning calorimetry (DSC). By virtue of a specifically explored shape memory programming, the composites were stretched and fixed into different temporary states. The electrical resistivity (R{sub s}) varied accordingly, which was able to be stabilized along with the shape fixing. Theoretical prediction based upon the tunneling model was performed. The R{sub s}–strain curves of the composites with different compositions were well fitted. Furthermore, the relative resistivity and the Gauge factor along with the elongation were calculated. The influence of the compositions on the strain-dependent R{sub s} was disclosed. The findings provided a new avenue to tailor the conductivity

Final argument relating to the Canadian nuclear power program

International Nuclear Information System (INIS)

Robertson, J.A.L.

1978-05-01

This report is the second brief, and one of a number of documents, submitted by Atomic Energy of Canada Limited (AECL) to the Ontario Royal Commission on Electric Power Planning. It is intended to update the original brief (AECL--5800) with respect to those matters that emerged during the course of the hearings and which had not been fully anticipated in that brief, as well as to summarize the AECL position on the various issues. To enable it to qualify as a ''final argument'' it contains only evidence or material that has been presented to the Royal Commission and is provided with marginal notations identifying the source of each section. It is AECL's position that the Canadian nuclear power program provides a safe, proven and efficient means of making a needed contribution to electricity supply, while strengthening the economy through the deployment of indigenous technology and resources. (author)

Composite fabrication via resin transfer molding technology

Energy Technology Data Exchange (ETDEWEB)

Jamison, G.M.; Domeier, L.A.

1996-04-01

The IMPReS (Integrated Modeling and Processing of Resin-based Structures) Program was funded in FY95 to consolidate, evaluate and enhance Sandia`s capabilities in the design and fabrication of composite structures. A key driver of this and related programs was the need for more agile product development processes and for model based design and fabrication tools across all of Sandia`s material technologies. A team of polymer, composite and modeling personnel was assembled to benchmark Sandia`s existing expertise in this area relative to industrial and academic programs and to initiate the tasks required to meet Sandia`s future needs. RTM (Resin Transfer Molding) was selected as the focus composite fabrication technology due to its versatility and growing use in industry. Modeling efforts focused on the prediction of composite mechanical properties and failure/damage mechanisms and also on the uncured resin flow processes typical of RTM. Appropriate molds and test composites were fabricated and model validation studies begun. This report summarizes and archives the modeling and fabrication studies carried out under IMPReS and evaluates the status of composite technology within Sandia. It should provide a complete and convenient baseline for future composite technology efforts within Sandia.

The effects of a reformer Pilates program on body composition and morphological characteristics in active women after a detraining period.

Science.gov (United States)

Vaquero-Cristóbal, Raquel; Alacid, Fernando; Esparza-Ros, Francisco; López-Plaza, Daniel; Muyor, José M; López-Miñarro, Pedro A

2016-10-01

The aim of this quasi-experimental pilot study was to explore the effects of a reformer Pilates program on the anthropometry, body composition, and somatotype of active adult women after a short non-exercise period. Twenty-eight women (mean age: 40.21 ± standard deviation of 8.12 years old) with one to three years of reformer Pilates experience participated in the study. The women participated in a reformer Pilates program for 16 weeks (one hour, twice per week) after 4 weeks of detraining (summer holidays) in 2012. The International Society for the Advancement of Kinanthropometry full profile was assessed before and after the intervention program. Significant decreases (p ≤ 0.05) from pre- to post-program were observed for triceps, iliac crest, supraspinale, abdominal, front thigh and medial calf skinfold thicknesses, six and eight skinfold thickness sums, forearm and ankle girths, waist/hip ratio, endomorphy, and fat mass. Significant increases (p ≤ .05) were observed for corrected arm, corrected calf girths, and muscle mass. Generally, women showed a mesomorphic endomorph (endomorphy predominant) and mesomorph-endomorph (endomorphy and mesomorphy predominant) in the pre- and posttests, respectively. In conclusion, the practice of reformer Pilates was associated with healthy changes in anthropometric parameters, body composition, and somatotype in Pilates-experienced women after 4 weeks of no physical exercise.

APL programs for the mathematics classroom

CERN Document Server

Thomson, Norman D

1989-01-01

The idea for this book grew out of proposals at the APL86 con­ ference in Manchester which led to the initiation of the I-APL (International APL) project, and through it to the availability of an interpreter which would bring the advantages of APL within the means of vast numbers of school children and their teachers. The motivation is that once school teachers have glimpsed the possibilities, there will be a place for an "ideas" book of short programs which will enable useful algorithms to be brought rapidly into classroom use, and perhaps even to be written and developed in front of the class. A scan of the contents will show how the conciseness of APL makes it possible to address a huge range of topics in a small number of pages. There is naturally a degree of idiosyncrasy in the choice of topics - the selection I have made reflects algo­ rithms which have either proved useful in real work, or which have caught my imagination as candidates for demonstrating the value of APL as a mathematical notation. Wh...

Transcribing for Greater Musicality.

Science.gov (United States)

Hinz, Bob

1995-01-01

States that transcribing is notating the performance of a musical composition or improvisation as the music is grasped aurally. Maintains that transcribing is effective for high school and college students who want to understand jazz techniques. Includes eight suggestions for teaching transcribing. (CFR)

Performers, Composers, Scores and Editions: Commentary on Huisman, Gingras, Dhondt, and Leman (2017

Directory of Open Access Journals (Sweden)

Dorottya Fabian

2017-09-01

Full Text Available Reflecting on a study that examines the impact of various editions on the speed of learning and performance errors, this short paper notes the crudeness of western music notation and how musicians cope with deciphering the composer's musical intentions. Drawing on parallels with practitioners who specialize in historically informed performance and tend to favor playing from manuscripts and facsimiles, I argue that although performing editions are useful, proper education regarding the meaning of notation practices and compositional styles might better serve musicians. This enables each generation to construct its own understanding of the music, and of the contradictory and insufficiently specified demands of the score.

Computer Program for Calculation of Complex Chemical Equilibrium Compositions, Rocket Performance, Incident and Reflected Shocks, and Chapman-Jouguet Detonations. Interim Revision, March 1976

Science.gov (United States)

Gordon, S.; Mcbride, B. J.

1976-01-01

A detailed description of the equations and computer program for computations involving chemical equilibria in complex systems is given. A free-energy minimization technique is used. The program permits calculations such as (1) chemical equilibrium for assigned thermodynamic states (T,P), (H,P), (S,P), (T,V), (U,V), or (S,V), (2) theoretical rocket performance for both equilibrium and frozen compositions during expansion, (3) incident and reflected shock properties, and (4) Chapman-Jouguet detonation properties. The program considers condensed species as well as gaseous species.

Effects of a 5-month football program on perceived psychological status and body composition of overweight boys

DEFF Research Database (Denmark)

Seabra, A C; Seabra, A F; Brito, J

2014-01-01

The effects of a 5-month intervention of football instruction and practice on the perceived psychological status and body composition of overweight boys were examined. Twelve boys (8-12 years; body mass index ≥ 85th percentile) participated in a structured 5-month football program, consisting...... of four weekly 60-90 min sessions with mean heart rate > 80%HRmax [football group (FG)]. A control group (CG) included eight boys of equivalent age from an obesity clinic located in the same area as the school. Both groups participated in two sessions of 45-90-min physical education per week at school....... Indicators of perceived psychological status included body image, self-esteem, attraction to participation in physical activity, and perceived physical competence measured with standardized questionnaires. Body composition was evaluated using dual-energy X-ray absorptiometry. From baseline through 5 months...

Melodic cues for metre

NARCIS (Netherlands)

Vos, P G; van Dijk, A; Schomaker, Lambertus

1994-01-01

A method of time-series analysis and a time-beating experiment were used to test the structural and perceptual validity of notated metre. Autocorrelation applied to the flow of melodic intervals between notes from thirty fragments of compositions for solo instruments by J S Bach strongly supported

Advanced Industrial Materials Program

Science.gov (United States)

Stooksbury, F.

1994-06-01

The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

ACE - an algebraic compiler and encoder for the Chalk River datatron computer

International Nuclear Information System (INIS)

Kennedy, J.M.; Okazaki, E.A.; Millican, M.

1960-03-01

ACE is a program written for the Chalk River Datatron (Burroughs 205) Computer to enable the machine to compile a program for solving a problem from instructions supplied by the user in a notation related much more closely to algebra than to the machine's own code. (author)

Effects of a popular exercise and weight loss program on weight loss, body composition, energy expenditure and health in obese women

Directory of Open Access Journals (Sweden)

Magrans-Courtney Teresa

2009-05-01

Full Text Available Abstract Objective To determine the safety and efficacy of altering the ratio of carbohydrate and protein in low-energy diets in conjunction with a popular exercise program in obese women. Design Matched, prospective clinical intervention study to assess efficacy of varying ratios of carbohydrate and protein intake in conjunction with a regular exercise program. Participants One-hundred sixty one sedentary, obese, pre-menopausal women (38.5 ± 8.5 yrs, 164.2 ± 6.7 cm, 94.2 ± 18.8 kg, 34.9 ± 6.4 kg·m-2, 43.8 ± 4.2% participated in this study. Participants were weight stable and not participating in additional weight loss programs. Methods Participants were assigned to either a no exercise + no diet control (CON, a no diet + exercise group (ND, or one of four diet + exercise groups (presented as kcals; % carbohydrate: protein: fat: 1 a high energy, high carbohydrate, low protein diet (HED [2,600; 55:15:30%], 2 a very low carbohydrate, high protein diet (VLCHP [1,200 kcals; 63:7:30%], 3 a low carbohydrate, moderate protein diet (LCMP [1,200 kcals; 50:20:30%] and 4 a high carbohydrate, low protein diet (HCLP [1,200 kcals; 55:15:30%]. Participants in exercise groups (all but CON performed a pneumatic resistance-based, circuit training program under supervision three times per week. Measurements Anthropometric, body composition, resting energy expenditure (REE, fasting blood samples and muscular fitness assessments were examined at baseline and weeks 2, 10 and 14. Results All groups except CON experienced significant reductions (P P P P P Conclusion Exercise alone (ND appears to have minimal impact on measured outcomes with positive outcomes apparent when exercise is combined with a hypoenergetic diet. Greater improvements in waist circumference and body composition occurred when carbohydrate is replaced in the diet with protein. Weight loss in all diet groups (VLCHP, LCMP and HCLP was primarily fat and stimulated improvements in markers of

Multi-material Preforming of Structural Composites

Energy Technology Data Exchange (ETDEWEB)

Norris, Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Eberle, Cliff C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pastore, Christopher M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sudbury, Thomas Z. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Xiong, Fue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hartman, David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-05-01

Fiber-reinforced composites offer significant weight reduction potential, with glass fiber composites already widely adopted. Carbon fiber composites deliver the greatest performance benefits, but their high cost has inhibited widespread adoption. This project demonstrates that hybrid carbon-glass solutions can realize most of the benefits of carbon fiber composites at much lower cost. ORNL and Owens Corning Reinforcements along with program participants at the ORISE collaborated to demonstrate methods for produce hybrid composites along with techniques to predict performance and economic tradeoffs. These predictions were then verified in testing coupons and more complex demonstration articles.

The effect of programmed exercise on body compositions and heart rate of 11-13 years-old male students

Directory of Open Access Journals (Sweden)

Mohammad H. Dashti

2011-11-01

Full Text Available Background: Different forms of physical activities can play a very important role in improving health and physical fitness. The purpose of this study was to examine the effect of the programmed exercise on students’ body compositions and heart rate at rest.Materials and Method: Two groups each consisting of 15students, aged averagely 12.6 years were the subjects of this experimental study. The experimental group in each session took part in an exercise program consisting of 20 minutes of aerobic activity (running, 10 minutes of aerobic exercise, 30 minutes of local training and 5 minutes of free exercise. The experiment last for 24 sessions. Control group didn’t do any special practice. In both groups, weight, fat mass, fat percentage, lean body mass and heart rate were measured during rest period before and after the experiment. Results: Results showed that the fat percentage, weight, fat mass and heart rate had decreased after 8 weeks of programmed exercise in the experimental group unlike the control group. However, no significant difference was observed in lean body mass.Conclusion: The exercise program used in this study may help loosing weight and make the heart stronger

The effects of an exercise training program on body composition and aerobic capacity parameters in Tunisian obese children

Directory of Open Access Journals (Sweden)

Sofien Regaieg

2013-01-01

Full Text Available Background: The prevalence of children obesity is rising alarmingly in both developed and developing countries. Developing effective exercise programs is a strategy for decreasing this prevalence and limiting obesity-associated long-term comorbidities. Objectives: To determine whether a 16-week training program; in addition to the school physical education and without dietary intervention; could have beneficial effects on body composition and aerobic capacity of obese children. Materials and Methods: Twenty-eight obese children (16 boys, 12 girls; aged 12-14 years were enrolled and were divided into either the exercise group (EG, n = 14 or the control group (CG, n = 14. EG participated in a 16-week aerobic exercises (four 60-min sessions per week at 70-85% of HRmax (maximum heart rate, in addition to the school physical education. Fat-Free Mass (FFM and Fat Mass (FM were assessed with bioelectrical impedance equipment. To assess aerobic capacity, maximal metabolic equivalent of task (METmax and maximal workload (Wmax were estimated with an electronically braked cycle ergometer (type Ergoline 500® . Results: At baseline, there were no differences between the two groups. After the training program, only the EG showed significant reduction in BMI (body mass index and waist circumference compared with the baseline values (P < 0.001. Exercise training significantly decreased FM only in the EG. A significant increase in FFM was seen in both groups; more marked in the EG. There was a significant increase in METmax (P < 0.05 and Wmax (P = 0.02 in the EG, and no significant changes in these parameters were seen in the CG. HRmax significantly decreased only in the EG (P < 0.05. Conclusion: This training program has beneficial effects on body composition and aerobic capacity parameters in obese children. Our intervention has the advantage of providing a sustainable and reproducible school and community approach for the management of children obesity.

A 12-week rehabilitation program improves body composition, pain sensation, and internal/external torques of baseball pitchers with shoulder impingement symptom.

Science.gov (United States)

Cha, Jun-Youl; Kim, Jae-Hak; Hong, Ju; Choi, Young-Tae; Kim, Min-Ho; Cho, Ji-Hyun; Ko, Il-Gyu; Jee, Yong-Seok

2014-02-01

The aim of this study was to investigate the effects of a 12-week rehabilitation program on body composition, shoulder pain, and isokinetic internal/external torques of pitchers with impingement syndrome. A total of 30 pitchers were divided into 2 groups: experimental group (EG, n = 16) and control group (CG, n= 14). The rehabilitation program consisted of physical therapy, warm-up, work-out, and cool-down. As results, body weight and fat mass of EG were decreased whereas muscle mass of EG was significantly increased after the experiment. The pain degrees in resting, normal daily activity, and strenuous activity on the numeric pain rating scale were significantly decreased in the EG. The internal and external peak torques (PTs) of uninvolved and involved sides of EG were increased in EG after 12 weeks. Such results provide a deficit ratio of both sides in EG close to normal values. The ratios of internal/external PTs in EG were also close to the reference values. The internal and external total works of both sides in EG were similar to the values of PT. The fatigue indices of internal and external rotators of both sides in EG were decreased. As a conclusion, a 12-week rehabilitation program reduced the shoulder pain, improved the body composition and enhanced the isokinetic shoulder internal/external rotators in EG with impingement symptoms. Also the study suggested that the rehabilitation program evened out the ratio between internal and external rotators and lowered the fatigue level after the experiment.

A social comparison theory analysis of group composition and efficacy of cancer support group programs.

Science.gov (United States)

Carmack Taylor, Cindy L; Kulik, James; Badr, Hoda; Smith, Murray; Basen-Engquist, Karen; Penedo, Frank; Gritz, Ellen R

2007-07-01

Group-based psychosocial programs provide an effective forum for improving mood and social support for cancer patients. Because some studies show more benefit for patients with initially high psychosocial distress, and little or no benefit for patients with initially low distress, support programs may better address patient needs by only including distressed patients. However, distressed patients may benefit particularly from the presence of nondistressed patients who model effective coping, an idea many researchers and extensions of social comparison theory support. We present a theoretical analysis, based on a social comparison perspective, of how group composition (heterogeneous group of distressed and nondistressed patients versus homogeneous group of distressed patients) may affect the efficacy of cancer support programs. We propose that a heterogeneous group allows distressed patients maximal opportunity for the various social comparison activities they are likely to prefer; a homogeneous group does not. Though the presence of nondistressed patients in a heterogeneous group potentially benefits distressed patients, the benefits for nondistressed patients are unclear. For nondistressed patients, heterogeneous groups may provide limited opportunities for preferred social comparison activity and may create the possibility for no benefit or even negative effects on quality of life. We also discuss ethical issues with enrolling nondistressed patients whose presence may help others, but whose likelihood of personal benefit is questionable.

[The effects of 16-weeks pilates mat program on anthropometric variables and body composition in active adult women after a short detraining period].

Science.gov (United States)

Vaquero-Cristóbal, Raquel; Alacid, Fernando; Esparza-Ros, Francisco; Muyor, José M; López-Miñarro, Pedro Ángel

2015-04-01

previous studies have analysed the effect of mat Pilates practice on anthropometric variables and body composition in sedentaries. To date no researchs have investigated the benefits of Pilates on these variables after a short detraining period. to determine the effect of a 16-week mat Pilates program on anthropometric variables, body composition and somatotype of women with previous practice experience after three weeks of detraining period. twenty-one women underwent a complete anthropometric assessment according with ISAK guidelines before and after a 16 week mat Pilates program (two days, one hour). All women had one to three years of mat Pilates experience and came to three weeks of detraining period (Christmas holiday). women showed significant decreases for body mass, BMI, upper limb (biceps and triceps) and trunk (subscapular, iliac crest, supraspinale and abdominal) individual skinfolds, 6 and 8 skinfold sums, endomorphy and fat mass; and a significant increases for muscle mass. The mean somatotype was classified as mesomorphic endomorph in the pre- (4.91, 4.01, 1.47) and post-test (4.68, 4.16, 1.69). Eight women changed their somatotype clasification after the intervention program. the practice of mat Pilates for 16 weeks caused changes associated with health state improvements on anthropometric variables, especially on skinfolds which significantly decreased, body composition (fat and muscle masses decreased and increased, respectively) and somatotype (there was a significantly decreased on the endomorph component in experienced women after three week of detraning. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Composites materials: the technology of future

International Nuclear Information System (INIS)

Ahmed, M.N.; Memon, I.R.; Ahmad, F.; Zafar, N.

2001-01-01

Composite materials have a long history of usage. Their precise beginnings are not known; however all recorded history contains references to some form of composite material. e.g. straw was used by man to strengthen mud bricks thousands of years ago. This article presents the use of advanced composites materials in aircraft and space industry. Its brief history, use in military and civil aviation, use in space program, future usage, advantages in terms of cost, weight and strength. Use of composites in unmanned aerial vehicles and problems associated with usage of composites materials are also discussed. (author)

The effect of a short-term high-intensity circuit training program on work capacity, body composition, and blood profiles in sedentary obese men: a pilot study.

Science.gov (United States)

Miller, Matthew B; Pearcey, Gregory E P; Cahill, Farrell; McCarthy, Heather; Stratton, Shane B D; Noftall, Jennifer C; Buckle, Steven; Basset, Fabien A; Sun, Guang; Button, Duane C

2014-01-01

The objective of this study was to determine how a high-intensity circuit-training (HICT) program affects key physiological health markers in sedentary obese men. Eight obese (body fat percentage >26%) males completed a four-week HICT program, consisting of three 30-minute exercise sessions per week, for a total of 6 hours of exercise. Participants' heart rate (HR), blood pressure (BP), rating of perceived exertion, total work (TW), and time to completion were measured each exercise session, body composition was measured before and after HICT, and fasting blood samples were measured before throughout, and after HICT program. Blood sample measurements included total cholesterol, triacylglycerides, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, glucose, and insulin. Data were analyzed by paired t-tests and one-way ANOVA with repeated measures. Statistical significance was set to P < 0.05. Data analyses revealed significant (P < 0.05) improvements in resting HR (16% decrease), systolic BP (5.5% decrease), TW (50.7%), fat tissue percentage (3.6%), lean muscle tissue percentage (2%), cholesterol (13%), triacylglycerol (37%), and insulin (18%) levels from before to after HICT program. Overall, sedentary obese males experienced a significant improvement in biochemical, physical, and body composition characteristics from a HICT program that was only 6 hours of the total exercise.

Compositional data types

DEFF Research Database (Denmark)

Bahr, Patrick; Hvitved, Tom

2011-01-01

-cut fusion style deforestation which yields considerable speedups. We demonstrate our framework in the setting of compiler construction, and moreover, we compare compositional data types with generic programming techniques and show that both are comparable in run-time performance and expressivity while our...

Building Face Composites Can Harm Lineup Identification Performance

Science.gov (United States)

Wells, Gary L.; Charman, Steve D.; Olson, Elizabeth A.

2005-01-01

Face composite programs permit eyewitnesses to build likenesses of target faces by selecting facial features and combining them into an intact face. Research has shown that these composites are generally poor likenesses of the target face. Two experiments tested the proposition that this composite-building process could harm the builder's memory…

Origin of the Moon Unveiled by its Heavy Iron Isotope Composition

Science.gov (United States)

Poitrasson, F.; Halliday, A. N.; Lee, D.; Levasseur, S.; Teutsch, N.

2002-12-01

The origin of the Moon has long been of interest and although the Giant Impact theory is currently the preferred explanation, unequivocal supporting evidence has been lacking. We have measured the iron isotope compositions of Shergotty-Nakhla-Chassigny meteorites and eucrites thought to come from Mars and Vesta, as well as samples from the Moon and the mafic Earth using high precision plasma source mass spectrometry. The mean iron isotope composition of the lunar samples, expressed in the conventional delta notation (d57Fe/54Fe) with respect to the IRMM-14 isotopic standard, is heavier (0.221 per mil (0.041: one standard deviation, 10 samples)) than those of the Earth (0.119 per mil (0.044, 7 samples)), which themselves are heavier than Martian meteorites (0.009 per mil (0.024, 6 samples)) and the eucrites measured (0.033 per mil (0.038, 7 samples)). Student's t-test calculations show that the Moon and Earth means are different from each other and from those of the other planetary bodies at >99% level of significance. The iron isotope compositions show no simple relationship with planetary heliocentric position, mantle oxygen fugacity, volatile content, or planet size. Similarly, these results do not support an origin of the Moon through co-accretion with the Earth, or as a fragment ejected from the Earth's mantle, or as another planet captured by the early Earth. In contrast, these data can be explained if the Earth, and especially the Moon, went through partial vaporisation and condensation leading to kinetic iron isotopic fractionation. Our data are also consistent with the suggested levels of enrichment of refractory elements for the bulk Earth and Moon. These new iron isotope results thus provide strong support for the origin of the Moon through a giant impact between the proto-Earth and another planet. Raleigh kinetic fractionation calculations indicate that only 1% loss of the current Fe budget of the Moon is required to explain its heavier isotopic

Safety, Liveness and Run-time Refinement for Modular Process-Aware Information Systems with Dynamic Sub Processes

DEFF Research Database (Denmark)

Debois, Søren; Hildebrandt, Thomas; Slaats, Tijs

2015-01-01

and verification of flexible, run-time adaptable process-aware information systems, moved into practice via the Dynamic Condition Response (DCR) Graphs notation co-developed with our industrial partner. Our key contributions are: (1) A formal theory of dynamic sub-process instantiation for declarative, event......We study modularity, run-time adaptation and refinement under safety and liveness constraints in event-based process models with dynamic sub-process instantiation. The study is part of a larger programme to provide semantically well-founded technologies for modelling, implementation......-based processes under safety and liveness constraints, given as the DCR* process language, equipped with a compositional operational semantics and conservatively extending the DCR Graphs notation; (2) an expressiveness analysis revealing that the DCR* process language is Turing-complete, while the fragment cor...

Development of environmental consequence index (ECI) using fuzzy composite programming

International Nuclear Information System (INIS)

Arunraj, N.S.; Maiti, J.

2009-01-01

Estimation of environmental consequences of hazardous substances in chemical industries is a very difficult task owing to (i) diversity in the types of hazards and their effects, (ii) location, and (ii) uncertainty in input information. Several indices have been developed over the years to estimate the environmental consequences. In this paper, a critical literature review was done on the existing environmental indices to identify their applications and limitations. The existing indices lack in consideration of all environmental consequence factors such as material hazard factors, dispersion factors, environmental effects, and their uncertainty. A new methodology is proposed for the development of environmental consequence index (ECI), which can overcome the stated limitations. Moreover, the recently developed fuzzy composite programming (FCP) is used to take care of the uncertainty in estimation. ECI is applied to benzene extraction unit (BEU) of a petrochemical industry situated in eastern part of India. The ECI for all the eight sections of BEU are estimated and ranked. The results are compared with well-established indices such as Dow fire and explosion index, safety weight hazard index (SWeHI), and environmental accident index (EAI). The proposed ECI may outperform other indices based on its detailed consideration of the factors and performed equally to Dow F and E index, and EAI in most of the cases for the present application

The Composition of Experience in the Musical-Holistic Art of Dario Buccino

Directory of Open Access Journals (Sweden)

Stefano Lombardi Vallauri

2016-02-01

Full Text Available Nowadays music is no longer exclusively a performative art: as in the case of electronic music, it can also be produced completely by means of technology, without the live bodily action of an instrumentalist. With respect to this aesthetic paradigm, the Italian composer Dario Buccino (Rome, 1968 does exactly the opposite, creating a music which is even hyper-performative, in that it increases to the highest degree the requirements regarding the performing subject's awareness and free intentionality, and minimizes (human automaticity. To this end he has developed an original notation system, with many graphical ad hoc solutions, where musical symbols are integrated with indications about the proprioceptive attitude and the physical actions of the performer (often kindred to those of experimental theatre, dance, and body art, above all about the experiences to be felt when playing. Buccino goes farther on the way of Karlheinz Stockhausen's "intuitive music" (about 1968-70, Dieter Schnebel's Maulwerke (1968-74, Helmut Lachenmann's "musique concrète instrumentale", Brian Ferneyhough's extreme demand for effort, and radicalises an approach which instead is typical of other musical genres, where form at all levels arises in composition (often extemporaneous from the singular physical relationship of the interpreter with the instrument. 

Aspect oriented service composition for telecommunication applications

NARCIS (Netherlands)

Niemöller, Jörg

2016-01-01

This PhD dissertation investigates how to overcome the negative effects of cross cutting concerns in the development of composite service applications. It proposes a combination of dynamic aspect oriented programming with a rules driven service composition mechanism. This combination allows very

Developing a program to identify and track corrosion in nuclear plant raw water systems

International Nuclear Information System (INIS)

Spires PE, G.V.; Pickles PE, S.B.

2001-01-01

Findings derived from a comprehensive plant performance survey at Ontario Power Generation's (OPG) nuclear units convinced management that it would be prudent to expand the ongoing power piping Flow Accelerated Corrosion (FAC) induced wall thinning base-lining and tracking program to encompass the raw cooling water systems as well. Such systems are subject to a distinctly different class of pipe wall thinning (PWT) mechanisms than the FAC that degrades high-energy power piping. This paper describes the PWT corrosion assessment and tracking program that has been developed and is currently being implemented by OPG for the raw cooling water (i.e., Service Water) systems within it's nuclear generating stations. Interim databases are used prior to initial inspection rounds to catalogue the prospective locations. For each piping system being surveyed, these interim databases include physical coordinates for the candidate locations, the type and wall thickness of the components comprising each location, ranking indications and recommended NDE methodologies as a function of the anticipated corrosion mechanisms. Rationales for assessing corrosion susceptibility and ranking prospective inspection sites are expounded by way of notations built into the database. (authors)

Automation from pictures

International Nuclear Information System (INIS)

Kozubal, A.J.

1992-01-01

The state transition diagram (STD) model has been helpful in the design of real time software, especially with the emergence of graphical computer aided software engineering (CASE) tools. Nevertheless, the translation of the STD to real time code has in the past been primarily a manual task. At Los Alamos we have automated this process. The designer constructs the STD using a CASE tool (Cadre Teamwork) using a special notation for events and actions. A translator converts the STD into an intermediate state notation language (SNL), and this SNL is compiled directly into C code (a state program). Execution of the state program is driven by external events, allowing multiple state programs to effectively share the resources of the host processor. Since the design and the code are tightly integrated through the CASE tool, the design and code never diverge, and we avoid design obsolescence. Furthermore, the CASE tool automates the production of formal technical documents from the graphic description encapsulated by the CASE tool. (author)

Future flare compositions

NARCIS (Netherlands)

Lingen, J.L.N. van; Meuken, D.; Hackspik, M.M.; Mäkeläinen, T.; Weiser, V.; Poulson, G.W.

2014-01-01

This poster describes the work done within the Category B joint research project under the European Defence Agency (EDA) on Future Flare Compositions [1]. Contributing members were Finland, Germany, United Kingdom and the Netherlands. The program was aimed to identify the technology gaps that apply

Design a computational program to calculate the composition variations of nuclear materials in the reactor operations

International Nuclear Information System (INIS)

Mohmmadnia, Meysam; Pazirandeh, Ali; Sedighi, Mostafa; Bahabadi, Mohammad Hassan Jalili; Tayefi, Shima

2013-01-01

Highlights: ► The atomic densities of light and heavy materials are calculated. ► The solution is obtained using Runge–Kutta–Fehlberg method. ► The material depletion is calculated for constant flux and constant power condition. - Abstract: The present work investigates an appropriate way to calculate the variations of nuclides composition in the reactor core during operations. Specific Software has been designed for this purpose using C#. The mathematical approach is based on the solution of Bateman differential equations using a Runge–Kutta–Fehlberg method. Material depletion at constant flux and constant power can be calculated with this software. The inputs include reactor power, time step, initial and final times, order of Taylor Series to calculate time dependent flux, time unit, core material composition at initial condition (consists of light and heavy radioactive materials), acceptable error criterion, decay constants library, cross sections database and calculation type (constant flux or constant power). The atomic density of light and heavy fission products during reactor operation is obtained with high accuracy as the program outputs. The results from this method compared with analytical solution show good agreements

Computer Music Synthesis and Composition

Science.gov (United States)

Ayers, Lydia

What is computer music composition? Composers are using the computer for everything from MIDI instruments communicating with computer sequencers, pitch trackers analyzing the sounds of acoustic instruments and converting them to pitch information, live performers with recorded music, performers with interactive computer programs, computer music produced by dancers using sensors, automatic music composition with the computer programs composing the music, composing with sounds or parts of sounds rather than notes, how to structure the use of time, composing with timbres, or the colors of sounds, and timbre morphing, such as a gong morphing to a voice, composing with textures and texture morphing, such as fluttertonguing morphing to pitch, granular synthesis, trills and convolution.

BPLOM: BPM Level-Oriented Methodology for Incremental Business Process Modeling and Code Generation on Mobile Platforms

Directory of Open Access Journals (Sweden)

Jaime Solis Martines

2013-06-01

Full Text Available The requirements engineering phase is the departure point for the development process of any kind of computer application, it determines the functionality needed in the working scenario of the program. Although this is a crucial point in application development, as incorrect requirement definition leads to costly error appearance in later stages of the development process, application domain experts’ implication remains minor. In order to correct this scenario, business process modeling notations were introduced to favor business expert implication in this phase, but notation complexity prevents this participation to reach its ideal state. Hence, we promote the definition of a level oriented business process methodology, which encourages the adaptation of the modeling notation to the modeling and technical knowledge shown by the expert. This approach reduces the complexity found by domain experts and enables them to model their processes completely with a level of technical detail directly proportional to their knowledge.

The Linguistic Memory of Composition and the Rhetoric and Composition PhD: Forgetting (and Remembering) Language and Language Difference in Doctoral Curricula

Science.gov (United States)

Kilfoil, Carrie Byars

2017-01-01

This article analyzes the decline of linguistics in rhetoric and composition PhD programs in terms of the "linguistic memory" (Trimbur) of composition. Since the field of linguistics once offered the primary means for composition to address the structural, psychological, sociohistorical, and cultural dimensions of language in student…

Structural dynamics of shroudless, hollow fan blades with composite in-lays

Science.gov (United States)

Aiello, R. A.; Hirschbein, M. S.; Chamis, C. C.

1982-01-01

Structural and dynamic analyses are presented for a shroudless, hollow titanium fan blade proposed for future use in aircraft turbine engines. The blade was modeled and analyzed using the composite blade structural analysis computer program (COBSTRAN); an integrated program consisting of mesh generators, composite mechanics codes, NASTRAN, and pre- and post-processors. Vibration and impact analyses are presented. The vibration analysis was conducted with COBSTRAN. Results show the effect of the centrifugal force field on frequencies, twist, and blade camber. Bird impact analysis was performed with the multi-mode blade impact computer program. This program uses the geometric model and modal analysis from the COBSTRAN vibration analysis to determine the gross impact response of the fan blades to bird strikes. The structural performance of this blade is also compared to a blade of similar design but with composite in-lays on the outer surface. Results show that the composite in-lays can be selected (designed) to substantially modify the mechanical performance of the shroudless, hollow fan blade.

Self-Healing Composite of Thermoset Polymer and Programmed Super Contraction Fibers

Science.gov (United States)

Li, Guoqiang (Inventor); Meng, Harper (Inventor)

2016-01-01

A composition comprising thermoset polymer, shape memory polymer to facilitate macro scale damage closure, and a thermoplastic polymer for molecular scale healing is disclosed; the composition has the ability to resolve structural defects by a bio-mimetic close-then heal process. In use, the shape memory polymer serves to bring surfaces of a structural defect into approximation, whereafter use of the thermoplastic polymer for molecular scale healing allowed for movement of the thermoplastic polymer into the defect and thus obtain molecular scale healing. The thermoplastic can be fibers, particles or spheres which are used by heating to a level at or above the thermoplastic's melting point, then cooling of the composition below the melting temperature of the thermoplastic. Compositions of the invention have the ability to not only close macroscopic defects, but also to do so repeatedly even if another wound/damage occurs in a previously healed/repaired area.

Italian musicians in Greece during the nineteenth century

Directory of Open Access Journals (Sweden)

Romanou Ekaterini

2003-01-01

Full Text Available In Greece, the monophonic chant of the Orthodox church and its neumatic notation have been transmitted as a popular tradition up to the first decades of the 20th century. The transformation of Greek musical tradition to a Western type of urban culture and the introduction of harmony, staff notation and western instruments and performance practices in the country began in the 19th century. Italian musicians played a central role in that process. A large number of them lived and worked on the Ionian Islands. Those Italian musicians have left a considerable number of transcriptions and original compositions. Quite a different cultural background existed in Athens. Education was in most cases connected to the church - the institution that during the four centuries of Turkish occupation kept Greeks united and nationally conscious. The neumatic notation was used for all music sung by the people, music of both western and eastern origin. The assimilation of staff notation and harmony was accelerated in the last quarter of the 19th century. At the beginning of the 20th century in Athens a violent cultural clash was provoked by the reformers of music education all of them belonging to German culture. The clash ended with the displacement of the Italian and Greek musicians from the Ionian Islands working at the time in Athens, and the defamation of their fundamental work in music education.

French Society Abroad: The Popularization of French Dance throughout Europe, 1600-1750

Directory of Open Access Journals (Sweden)

Adam Paul Rinehart

2017-09-01

Full Text Available This paper explores the dissemination of French dance, dance notation, and dance music throughout Europe, and it explains the reasons why French culture had such an influence on other European societies from 1600-1750. First, the paper seeks to prove that King Louis XIV played a significant role in the outpour of French dance and the arts. Next, the paper discusses prominent French writers of dance notation who influenced the spread of French dance literature and training throughout Europe. Finally, the paper delineates European composers and their involvement in the development and production of French dance music. Using academic, peer-reviewed journal articles, books, and other scholarly sources, this paper seeks to accurately present the information in an orderly fashion. The paper contains visual evidence of dance and music notation to assist the reader in understanding the subject matter. Additionally, theories of contemporary authors as well as authors from the time period are discussed to present concrete evidence. The two main types of dance discussed in the paper are ballroom and court dances, which were prominent within the French royal court. One major finding of the research is the fact that French court and ballroom dances were specifically designed to communicate the power and prestige of King Louis XIV; consequently, other European countries were influenced to strive for similar prestige. Another finding is that many forms of French dance notation were translated and published in other countries, which increased the use of French dance throughout Europe. Musically, European composers such as Handel and Mozart included elements of French dance music in their compositions, and thus played a significant role in prevalence of French dance music throughout Europe. Overall, this paper proves that French dance received wide recognition due to political influence, availability of dance notation, and the involvement of prominent composers.

Advanced technology composite aircraft structures

Science.gov (United States)

Ilcewicz, Larry B.; Walker, Thomas H.

1991-01-01

Work performed during the 25th month on NAS1-18889, Advanced Technology Composite Aircraft Structures, is summarized. The main objective of this program is to develop an integrated technology and demonstrate a confidence level that permits the cost- and weight-effective use of advanced composite materials in primary structures of future aircraft with the emphasis on pressurized fuselages. The period from 1-31 May 1991 is covered.

Advanced composite elevator for Boeing 727 aircraft

Science.gov (United States)

1979-01-01

Detail design activities are reported for a program to develop an advanced composites elevator for the Boeing 727 commercial transport. Design activities include discussion of the full scale ground test and flight test activities, the ancillary test programs, sustaining efforts, weight status, and the production status. Prior to flight testing of the advanced composites elevator, ground, flight flutter, and stability and control test plans were reviewed and approved by the FAA. Both the ground test and the flight test were conducted according to the approved plan, and were witnessed by the FAA. Three and one half shipsets have now been fabricated without any significant difficulty being encountered. Two elevator system shipsets were weighed, and results validated the 26% predicted weight reduction. The program is on schedule.

Modelling Constructs

DEFF Research Database (Denmark)

Kindler, Ekkart

2009-01-01

, these notations have been extended in order to increase expressiveness and to be more competitive. This resulted in an increasing number of notations and formalisms for modelling business processes and in an increase of the different modelling constructs provided by modelling notations, which makes it difficult......There are many different notations and formalisms for modelling business processes and workflows. These notations and formalisms have been introduced with different purposes and objectives. Later, influenced by other notations, comparisons with other tools, or by standardization efforts...... to compare modelling notations and to make transformations between them. One of the reasons is that, in each notation, the new concepts are introduced in a different way by extending the already existing constructs. In this chapter, we go the opposite direction: We show that it is possible to add most...

Experimental investigation of defect criticality in FRP laminate composites

Science.gov (United States)

Joyce, Peter James

1999-11-01

This work examines the defect criticality of fiber reinforced polymer Composites. The objective is to determine the sensitivity of the finished composite to various process-induced defects. This work focuses on two different classes of process-induced defects; (1) fiber waviness in high performance carbon-fiber reinforced unidirectional composites and (2) void volume in low cost glass-fabric reinforced composites. The role of fiber waviness in the compressive response of unidirectional composites has been studied by a number of other investigators. Because of difficulties associated with producing real composites with varying levels of fiber waviness, most experimental studies of fiber waviness have evaluated composites with artificially induced fiber waviness. Furthermore, most experimental studies have been concentrated on the effects of out-of-plane fiber waviness. The objective of this work is to evaluate the effects of in-plane fiber waviness naturally occurring in autoclave consolidated thermoplastic laminates. The first phase of this project involved the development of a simple technique for measuring the resulting fiber waviness levels. An experimental investigation of the compression strength reduction in composites with in-plane fiber waviness followed. The experimental program included carbon-fiber reinforced thermoplastic composites manufactured from prepreg tape by hand layup, and carbon-fiber and glass-fiber reinforced composites manufactured from an experimental powder towpreg by filament winding and autoclave consolidation. The compression specimens exhibited kink band failure in the prepreg composite and varying amounts of longitudinal splitting and kink banding in the towpreg composites. The compression test results demonstrated the same trend as predicted by microbudding theory but the overall quantitative correlation was poor. The second thrust of this research evaluated void effects in resin transfer molded composites. Much of the existing

Composites and blends from biobased materials

Energy Technology Data Exchange (ETDEWEB)

Kelley, S.S. [National Renewable Energy Laboratory, Golden, CO (United States)

1995-05-01

The program is focused on the development of composites and blends from biobased materials to use as membranes, high value plastics, and lightweight composites. Biobased materials include: cellulose derivative microporous materials, cellulose derivative copolymers, and cellulose derivative blends. This year`s research focused on developing an improved understanding of the molecular features that cellulose based materials with improved properties for gas separation applications. Novel cellulose ester membrane composites have been developed and are being evaluated under a collaborative research agreement with Dow Chemicals Company.

Change in weight and body composition in obese subjects following a hypocaloric diet plus different training programs or physical activity recommendations.

Science.gov (United States)

Benito, Pedro J; Bermejo, Laura M; Peinado, Ana B; López-Plaza, Bricia; Cupeiro, Rocío; Szendrei, Barbara; Calderón, Francisco J; Castro, Eliane A; Gómez-Candela, Carmen

2015-04-15

The aim of the present study was to compare the effects of different physical activity programs, in combination with a hypocaloric diet, on anthropometric variables and body composition in obese subjects. Ninety-six obese (men: n = 48; women: n = 48; age range: 18-50 yr) participated in a supervised 22-wk program. They were randomized into four groups: strength training (S; n = 24), endurance training (E; n = 26), combined strength + endurance training (SE; n = 24), and physical activity recommendations (C; n = 22). In addition, all groups followed the same hypocaloric diet. At baseline and at the end of the intervention, dietetic and physical activity variables were assessed using validated questionnaires. Anthropometric variables were recorded along with body composition variables measured using dual-energy X-ray absorptiometry techniques. At the end of the intervention, significant improvements were seen within groups in terms of body weight (S: -9.21 ± 0.83 kg; E: -10.55 ± 0.80 kg; SE: -9.88 ± 0.85 kg; C: -8.69 ± 0.89 kg), and total fat mass (S: -5.24 ± 0.55%; E: -5.35 ± 0.55%; SE: -4.85 ± 0.56%; C: -4.89 ± 0.59%). No differences were seen between groups at this time in terms of any other anthropometric or body composition variables examined. All groups increased their total physical activity in metabolic equivalents (MET) per week during the intervention, but with no difference between groups (S: 976 ± 367 MET-min/wk; E: 954 ± 355 MET-min/wk; SE: 1 329 ± 345 MET-min/wk; C: 763 ± 410 MET-min/wk). This study shows that, when combined with a hypocaloric diet, exercise training and adherence to physical activity recommendations are equally effective at reducing body weight and modifying body composition in the treatment of obesity (Clinical Trials Gov. number: NCT01116856). Copyright © 2015 the American Physiological Society.

Ricercar

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal; Kaarsgaard, Robin; Soeken, Mathias

2015-01-01

Previously, Soeken and Thomsen presented six basic semantics-preserving rules for rewriting reversible logic circuits, defined using the well-known diagrammatic notation of Feynman. While this notation is both useful and intuitive for describing reversible circuits, its shortcomings in generality...... complicates the specification of more sophisticated and abstract rewriting rules. In this paper, we introduce Ricercar, a general textual description language for reversible logic circuits designed explicitly to support rewriting. Taking the not gate and the identity gate as primitives, this language allows...... circuits to be constructed using control gates, sequential composition, and ancillae, through a notion of ancilla scope. We show how the above-mentioned rewriting rules are defined in this language, and extend the rewriting system with five additional rules to introduce and modify ancilla scope...

Stochastic-Strength-Based Damage Simulation of Ceramic Matrix Composite Laminates

Science.gov (United States)

Nemeth, Noel N.; Mital, Subodh K.; Murthy, Pappu L. N.; Bednarcyk, Brett A.; Pineda, Evan J.; Bhatt, Ramakrishna T.; Arnold, Steven M.

2016-01-01

The Finite Element Analysis-Micromechanics Analysis Code/Ceramics Analysis and Reliability Evaluation of Structures (FEAMAC/CARES) program was used to characterize and predict the progressive damage response of silicon-carbide-fiber-reinforced reaction-bonded silicon nitride matrix (SiC/RBSN) composite laminate tensile specimens. Studied were unidirectional laminates [0] (sub 8), [10] (sub 8), [45] (sub 8), and [90] (sub 8); cross-ply laminates [0 (sub 2) divided by 90 (sub 2),]s; angled-ply laminates [plus 45 (sub 2) divided by -45 (sub 2), ]s; doubled-edge-notched [0] (sub 8), laminates; and central-hole laminates. Results correlated well with the experimental data. This work was performed as a validation and benchmarking exercise of the FEAMAC/CARES program. FEAMAC/CARES simulates stochastic-based discrete-event progressive damage of ceramic matrix composite and polymer matrix composite material structures. It couples three software programs: (1) the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC), (2) the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program (CARES/Life), and (3) the Abaqus finite element analysis program. MAC/GMC contributes multiscale modeling capabilities and micromechanics relations to determine stresses and deformations at the microscale of the composite material repeating-unit-cell (RUC). CARES/Life contributes statistical multiaxial failure criteria that can be applied to the individual brittle-material constituents of the RUC, and Abaqus is used to model the overall composite structure. For each FEAMAC/CARES simulation trial, the stochastic nature of brittle material strength results in random, discrete damage events that incrementally progress until ultimate structural failure.

From Binary Notation to Gravitational Waves: Rocket Science Made Easy

Science.gov (United States)

Fisher, Diane K.; Leon, Nancy J.; Cooper, Larry

2001-01-01

The Space Place is a NASA educational outreach program open to all NASA missions, studies, and instruments. It uses diverse media (web, print, displays, hands-on activities) to deliver high-quality products through a highly leveraged infrastructure. Additional information is contained in the original extended abstract.

Beginning R The Statistical Programming Language

CERN Document Server

Gardener, Mark

2012-01-01

Conquer the complexities of this open source statistical language R is fast becoming the de facto standard for statistical computing and analysis in science, business, engineering, and related fields. This book examines this complex language using simple statistical examples, showing how R operates in a user-friendly context. Both students and workers in fields that require extensive statistical analysis will find this book helpful as they learn to use R for simple summary statistics, hypothesis testing, creating graphs, regression, and much more. It covers formula notation, complex statistics

The effects of an 8-week multicomponent inpatient treatment program on body composition and anaerobic fitness in overweight and obese children and adolescents

Directory of Open Access Journals (Sweden)

Karner-Rezek K

2013-03-01

Full Text Available Klaus Karner-Rezek,1 Beat Knechtle,2,3 Matthias Fenzl,4 Christian Schlegel,4 Manuela Konrad,5 Thomas Rosemann2 1Private University of the Principality of Liechtenstein, Triesen, Principality of Liechtenstein, 2Institute of General Practice and for Health Services Research, University of Zurich, Zurich, Switzerland; 3Gesundheitszentrum St Gallen, St Gallen, Switzerland; 4Swiss Olympic Medical Center, Medizinisches Zentrum Bad Ragaz, Switzerland; 5University of Applied Sciences JOANNEUM, Bad Gleichenberg, Austria Background: High intensity exercise is considered as an effective means for reducing body fat. The aims of the present study were to investigate (1 whether body mass would be lost and body composition would change and (2 whether variables of anaerobic fitness prior to the intervention period would be related to loss of body mass and changes in body composition in overweight and obese children and adolescents. Methods: A total of 28 children and adolescents (19 boys, 9 girls attended an 8-week multicomponent inpatient program. Caloric intake was based on the subject's weight and a daily energy deficit of ~500 kcal was targeted. At the beginning and at the end of the program, variables of anaerobic fitness were assessed using Wingate tests. Body composition was measured before and after the program using dual-energy X-ray absorptiometry. Results: Body mass decreased by 11.4% ± 1.6% in boys and by 11.0% ± 2.8% in girls (P < 0.001. Fat mass decreased by 23.8% ± 6.1% in boys and by 21.5% ± 5.2% in girls (P < 0.001. The decrease in fat mass was associated with the decrease in body mass in boys (r = 0.54, P = 0.017 but not in girls (P > 0.05. The decrease in body mass and the decrease in fat mass were neither associated with overall energy expenditure nor with the energy deficit in both genders (P > 0.05. Mean power in W/kg increased in the Wingate tests by 95.4% ± 109.1% in boys and by 100.0% ± 119.9% in girls (P < 0.001. Conclusions

Developmental assessment of the Fort St. Vrain version of the Composite HTGR Analysis Program (CHAP-2)

International Nuclear Information System (INIS)

Stroh, K.R.

1980-01-01

The Composite HTGR Analysis Program (CHAP) consists of a model-independent systems analysis mainframe named LASAN and model-dependent linked code modules, each representing a component, subsystem, or phenomenon of an HTGR plant. The Fort St. Vrain (FSV) version (CHAP-2) includes 21 coded modules that model the neutron kinetics and thermal response of the core; the thermal-hydraulics of the reactor primary coolant system, secondary steam supply system, and balance-of-plant; the actions of the control system and plant protection system; the response of the reactor building; and the relative hazard resulting from fuel particle failure. FSV steady-state and transient plant data are being used to partially verify the component modeling and dynamic smulation techniques used to predict plant response to postulated accident sequences

Requirements Modeling with Agent Programming

Science.gov (United States)

Dasgupta, Aniruddha; Krishna, Aneesh; Ghose, Aditya K.

Agent-oriented conceptual modeling notations are highly effective in representing requirements from an intentional stance and answering questions such as what goals exist, how key actors depend on each other, and what alternatives must be considered. In this chapter, we review an approach to executing i* models by translating these into set of interacting agents implemented in the CASO language and suggest how we can perform reasoning with requirements modeled (both functional and non-functional) using i* models. In this chapter we particularly incorporate deliberation into the agent design. This allows us to benefit from the complementary representational capabilities of the two frameworks.

Comment to: The effects of an 8-week multicomponent inpatient treatment program on body composition and anaerobic fitness in overweight and obese children and adolescents

Directory of Open Access Journals (Sweden)

Radtke T

2014-03-01

Full Text Available Thomas Radtke,1 Bruno H Knöpfli,2 Johannes H Wildhaber,3 Jürg Hammer4 1Division of Cardiovascular Prevention, Rehabilitation and Sports Medicine, Swiss Cardiovascular Center, Inselspital, University Hospital and University of Bern, Bern, 2Kinder und Jugendmedizin, Zurich, 3Department of Pediatrics, Hospital Fribourg, Fribourg, 4Division of Intensive Care and Pulmonology, University Children's Hospital Basel, Basel, SwitzerlandWe note with surprise a recent paper entitled "The effects of an 8-week multicomponent inpatient treatment program on body composition and anaerobic fitness in overweight and obese children and adolescents" by Karner-Rezek et al1 published in the International Journal of General Medicine concerning the effects of an 8-week multicomponent inpatient treatment program on body composition and anaerobic fitness in overweight and obese children and adolescents. We would like to take this opportunity to comment on the study findings and, in particular, address the methodological inconsistencies and ambiguities in this study.View original paper by Karner-Rezek and colleagues.

Anthropometry and Body Composition of Preterm Neonates in the Light of Metabolic Programming.

Science.gov (United States)

Parlapani, Elisavet; Agakidis, Charalampos; Karagiozoglou-Lampoudi, Thomais

2018-01-01

The improved survival of preterm infants has led to increased interest regarding their health as adults. In the context of metabolic programming, the connection between perinatal and early postnatal nutrition and growth with health in later life has brought to the fore the role of catch-up growth during the first months of preterm infants' lives and its association with body fat and obesity in childhood or puberty. A state-of-the art review was conducted in order to assess the way catch-up is evaluated, in terms of timing and rate. Adequate growth is of major importance for neurodevelopment; however, it may compete with adiposity or metabolic health. Studies based on body composition assessment have given conflicting results as regards the effect of early versus late and rapid versus slow catch-up growth on later health, mainly attributed to the lack of established criteria and definitions. Given that adequate early nutrition is crucial for the neurodevelopment of preterm infants, further studies are needed on the role of catch-up growth in long-term outcome, using generally accepted qualitative and quantitative criteria.

Modeling of combustion products composition of hydrogen-containing fuels

International Nuclear Information System (INIS)

Assad, M.S.

2010-01-01

Due to the usage of entropy maximum principal the algorithm and the program of chemical equilibrium calculation concerning hydrogen--containing fuels are devised. The program enables to estimate the composition of combustion products generated in the conditions similar to combustion conditions in heat engines. The program also enables to reveal the way hydrogen fraction in the conditional composition of the hydrocarbon-hydrogen-air mixture influences the harmful components content. It is proven that molecular hydrogen in the mixture is conductive to the decrease of CO, CO 2 and CH x concentration. NO outlet increases due to higher combustion temperature and N, O, OH concentrations in burnt gases. (authors)

Cooperative program for design, fabrication, and testing of graphite/epoxy composite helicopter shafting

Science.gov (United States)

Wright, C. C.; Baker, D. J.; Corvelli, N.; Thurston, L.; Clary, R.; Illg, W.

1971-01-01

The fabrication of UH-1 helicopter tail rotor drive shafts from graphite/epoxy composite materials is discussed. Procedures for eliminating wrinkles caused by lack of precure compaction are described. The development of the adhesive bond between aluminum end couplings and the composite tube is analyzed. Performance tests to validate the superiority of the composite materials are reported.

Eimeria Oocyst Concentrations and Species Composition in Litter from Commercial Broiler Farms During Anticoccidial Drug or Live Eimeria Oocyst Vaccine Control Programs.

Science.gov (United States)

Jenkins, Mark C; Parker, Carolyn; Ritter, Donald

2017-06-01

The purpose of this study was to determine if Eimeria oocyst concentrations and species composition in commercial broiler house litter changed during different cycles of anticoccidial drug (ACD) or live Eimeria oocyst vaccine (VAC) control programs and if there was a correlation between Eimeria oocyst levels and broiler performance. Litter samples were collected from a total of 15 different broiler farms encompassing a total of 45 individual houses during at least one complete grow-out cycle over a 21-mo period. Of these 15 broiler farms, three were followed for the entire 21-mo period spanning three ACD and four VAC cycles. Samples were collected at 2, 4, and 7-8 wk of grow-out corresponding to starter, grower, and withdraw periods of the ACD cycle. On a number of occasions, litter samples were obtained just prior to chick placement. Eimeria oocysts were isolated from all samples, counted by microscopy, and extracted for DNA to identify Eimeria species by ITS1 PCR. In general, Eimeria oocyst concentration in litter reached peak levels at 2-4 wk of grow-out regardless of coccidiosis control measure being used. However, peak oocyst numbers were sometimes delayed until 7-8 wk, indicating some level of Eimeria spp. drug resistance or incomplete vaccine coverage. Eimeria maxima , Eimeria acervulina , Eimeria praecox, and Eimeria tenella were generally present in all samples, and no difference in the species composition was noted between houses on a particular farm. While Eimeria species composition was similar among houses, Eimeria spp. oocyst levels exhibited sporadic peaks in one house of a given location's houses. Of particular interest was the observed correlation between E. maxima oocyst abundance and chick mortality. However, no correlation was observed in E. maxima oocyst levels, and the performance parameters adjusted feed conversion ratio and average daily weight gain. This study showed that understanding the dynamics of Eimeria spp. oocyst levels and species

Type-Directed Elaboration of Quasiquotations

DEFF Research Database (Denmark)

Christiansen, David Raymond

2014-01-01

Idris's reflection features allow Idris metaprograms to manipulate a representation of Idris's core language as a datatype, but these reflected terms were designed for ease of type checking and are therefore exceedingly verbose and tedious to work with. A simpler notation would make these programs...

Kort brugervejledning til simuleringsprogrammet MantlSim

DEFF Research Database (Denmark)

Shah, Louise Jivan

1999-01-01

I dette notat beskrives brugen af, simuleringsprogrammet MANTLSIM. Programmet kan beregne de termiske forhold, i low flow solvarmeanlæg med kappebeholdere, med de danske reference vejrdata TRY.MANLTSIM er baseret på det tidligere program KAPPESOL, der er udbygget så forskellige realistiske varmtv...

Computer aided analysis of additional chromosome aberrations in Philadelphia chromosome positive acute lymphoblastic leukaemia using a simplified computer readable cytogenetic notation

Directory of Open Access Journals (Sweden)

Mohr Brigitte

2003-01-01

Full Text Available Abstract Background The analysis of complex cytogenetic databases of distinct leukaemia entities may help to detect rare recurring chromosome aberrations, minimal common regions of gains and losses, and also hot spots of genomic rearrangements. The patterns of the karyotype alterations may provide insights into the genetic pathways of disease progression. Results We developed a simplified computer readable cytogenetic notation (SCCN by which chromosome findings are normalised at a resolution of 400 bands. Lost or gained chromosomes or chromosome segments are specified in detail, and ranges of chromosome breakpoint assignments are recorded. Software modules were written to summarise the recorded chromosome changes with regard to the respective chromosome involvement. To assess the degree of karyotype alterations the ploidy levels and numbers of numerical and structural changes were recorded separately, and summarised in a complex karyotype aberration score (CKAS. The SCCN and CKAS were used to analyse the extend and the spectrum of additional chromosome aberrations in 94 patients with Philadelphia chromosome positive (Ph-positive acute lymphoblastic leukemia (ALL and secondary chromosome anomalies. Dosage changes of chromosomal material represented 92.1% of all additional events. Recurring regions of chromosome losses were identified. Structural rearrangements affecting (pericentromeric chromosome regions were recorded in 24.6% of the cases. Conclusions SCCN and CKAS provide unifying elements between karyotypes and computer processable data formats. They proved to be useful in the investigation of additional chromosome aberrations in Ph-positive ALL, and may represent a step towards full automation of the analysis of large and complex karyotype databases.

Adjusting shape-memory properties of amorphous polyether urethanes and radio-opaque composites thereof by variation of physical parameters during programming

International Nuclear Information System (INIS)

Cui, J; Kratz, K; Lendlein, A

2010-01-01

Various composites have been prepared to improve the mechanical properties of shape-memory polymers (SMPs) or to incorporate new functionalities (e.g. magneto-sensitivity) in polymer matrices. In this paper, we systematically investigated the influence of the programming temperature T prog and the applied strain ε m as parameters of the shape-memory creation procedure (SMCP) on the shape-memory properties of an amorphous polyether urethane and radio-opaque composites thereof. Recovery under stress-free conditions was quantified by the shape recovery rate R r and the switching temperature T sw , while the maximum recovery stress σ max was determined at the characteristic temperature T σ,max under constant strain conditions. Excellent shape-memory properties were achieved in all experiments with R r values in between 80 and 98%. σ max could be tailored from 0.4 to 3.7 MPa. T sw and T σ,max could be systematically adjusted from 33 to 71 °C by variation of T prog for each investigated sample. The investigated radio-opaque shape-memory composites will form the material basis for mechanically active scaffolds, which could serve as an intelligent substitute for the extracellular matrix to study the influence of mechanical stimulation of tissue development

Boron carbide-carbon composites and composites for cryogenic applications

International Nuclear Information System (INIS)

Sheinberg, H.

1979-01-01

Because of its neutronic properties, high hardness, and high melting temperature, boron carbide (B 4 C) is widely used at the Los Alamos Scientific Laboratory. However because of its hardness and mode of manufacture, it is expensive to machine finish to tight dimensional specifictions. For some neutronic applications, a density considerably below the theoretical 2.52 Mg/m 3 was acceptable, and this relaxation in density specification permitted addition of carbon as a second phase to reduce machining costs. We conducted an experimental program to prepare 50.8-mm-diam by 34.8-mm-thick cylinders of B 4 C and B 4 C-C composites with concentrations of carbon varying from 5.5 to 30 volume percent. Additionally we used three forms of carbon, natural flake graphite, synthetic graphite flour, and a fine furnace black as the source of the second phase. We determined the sound velocity, compressive strength, coefficient of thermal expansion, electrical resistivity, and microstructure as functions of composition. Additionally, an enriched boron ( 10 B)-carbon composite was studied as an alternate material

HYDRAULIC CONCRETE COMPOSITION AND PROPERTIES CONTROL SYSTEM

Directory of Open Access Journals (Sweden)

O. M. Pshinko

2015-08-01

Full Text Available Purpose. Scientific work aims at the development and testing of information system to meet the challenges of concrete composition design and control (for railway structures and buildings based on the physico-analytical method algorithm for hydraulic concrete composition calculation. Methodology. The proposed algorithm of hydraulic concrete composition calculation is based on the physicochemical mechanics and in particular on the rheology of elastic–viscous–plastic bodies. The system of canonical equations consists of the equations for concrete strength, absolute volume, concrete mix consistency as well as the equation for optimal concrete saturation with aggregates while minimizing cement content. The joint solution of these four equations related to composition allows determining for the materials the concrete composition of required strength, concrete workability with minimum cement content. The procedure for calculation of hydraulic concrete composition according to the physico-analytical method consists of two parts: 1 physical, which is laboratory testing of concrete mix components in different concrete compositions; 2 analytical, which represents the calculation algorithm for concrete compositions equivalent in concrete strength and workability that comply with the specific conditions of concrete placing. Findings. To solve the problem of designing the concrete composition with the desired properties for railway structures and buildings it was proposed to use the information technology in the form of a developed computer program whose algorithm includes the physico-analytical method for hydraulic concrete composition determination. Originality. The developed concrete composition design method takes into account the basic properties of raw materials, concrete mix and concrete, which are pre-determined. The distinctive feature of physico-analytical method is obtaining of a set of equivalent compositions with a certain concrete mix

Adaptive, Active and Multifunctional Composite and Hybrid Materials Program: Composite and Hybrid Materials ERA

Science.gov (United States)

2014-04-01

590 . SMASIS2011-4934. L. D. Peel, J. Baur, D. Phillips, and A. McClung, “The Effect of Scaling on the Performance of Elastomer Composite Actuators...fragility of the fibers it was also not possible to extract some of them from their adhesive paper mountings without breakage. For Raman ... Raman spectroscopy and microscopy (SEM), the nanocomposites were evaluated for their thermal analytical properties using TGA. Electrical

Compositional Safety Analysis using Barrier Certificates

DEFF Research Database (Denmark)

Sloth, Christoffer; Pappas, George J.; Wisniewski, Rafael

2012-01-01

This paper proposes a compositional method for verifying the safety of a dynamical system, given as an interconnection of subsystems. The safety verification is conducted by the use of the barrier certificate method; hence, the contribution of this paper is to show how to obtain compositional...... conditions for safety verification. We show how to formulate the verification problem, as a composition of coupled subproblems, each given for one subsystem. Furthermore, we show how to find the compositional barrier certificates via linear and sum of squares programming problems. The proposed method makes...... it possible to verify the safety of higher dimensional systems, than the method for centrally computed barrier certificates. This is demonstrated by verifying the safety of an emergency shutdown of a wind turbine....

Second generation PMR polyimide/fiber composites

Science.gov (United States)

Cavano, P. J.

1979-01-01

A second generation polymerization monomeric reactants (PMR) polyimdes matrix system (PMR 2) was characterized in both neat resin and composite form with two different graphite fiber reinforcements. Three different formulated molecular weight levels of laboratory prepared PMR 2 were examined, in addition to a purchased experimental fully formulated PMR 2 precurser solution. Isothermal aging of graphite fibers, neat resin samples and composite specimens in air at 316 C were investigated. Humidity exposures at 65 C and 97 percent relative humidity were conducted for both neat resin and composites for eight day periods. Anaerobic char of neat resin and fire testing of composites were conducted with PMR 15, PMR 2, and an epoxy system. Composites were fire tested on a burner rig developed for this program. Results indicate that neat PMR 2 resins exhibit excellent isothermal resistance and that PMR 2 composite properties appear to be influenced by the thermo-oxidative stability of the reinforcing fiber.

Composition at Washington State University: Building a Multimodal Bricolage

Science.gov (United States)

Ericsson, Patricia; Hunter, Leeann Downing; Macklin, Tialitha Michelle; Edwards, Elizabeth Sue

2016-01-01

Multimodal pedagogy is increasingly accepted among composition scholars. However, putting such pedagogy into practice presents significant challenges. In this profile of Washington State University's first-year composition program, we suggest a multi-vocal and multi-theoretical approach to addressing the challenges of multimodal pedagogy. Patricia…

Critical joints in large composite aircraft structure

Science.gov (United States)

Nelson, W. D.; Bunin, B. L.; Hart-Smith, L. J.

1983-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical structural joints of composite wing structure that meets design requirements for a 1990 commercial transport aircraft. The prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Ancillary testing of 180 specimens generated data on strength and load-deflection characteristics which provided input to the joint analysis. Load-sharing between fasteners in multirow bolted joints was computed by the nonlinear analysis program A4EJ. This program was used to predict strengths of 20 additional large subcomponents representing strips from a wing root chordwise splice. In most cases, the predictions were accurate to within a few percent of the test results. In some cases, the observed mode of failure was different than anticipated. The highlight of the subcomponent testing was the consistent ability to achieve gross-section failure strains close to 0.005. That represents a considerable improvement over the state of the art.

Database for waste glass composition and properties

International Nuclear Information System (INIS)

Peters, R.D.; Chapman, C.C.; Mendel, J.E.; Williams, C.G.

1993-09-01

A database of waste glass composition and properties, called PNL Waste Glass Database, has been developed. The source of data is published literature and files from projects funded by the US Department of Energy. The glass data have been organized into categories and corresponding data files have been prepared. These categories are glass chemical composition, thermal properties, leaching data, waste composition, glass radionuclide composition and crystallinity data. The data files are compatible with commercial database software. Glass compositions are linked to properties across the various files using a unique glass code. Programs have been written in database software language to permit searches and retrievals of data. The database provides easy access to the vast quantities of glass compositions and properties that have been studied. It will be a tool for researchers and others investigating vitrification and glass waste forms

Reasoning about Grover's Quantum Search Algorithm using Probabilistic wp

NARCIS (Netherlands)

Butler, M.J.; Hartel, Pieter H.

Grover's search algorithm is designed to be executed on a quantum mechanical computer. In this paper, the probabilistic wp-calculus is used to model and reason about Grover's algorithm. It is demonstrated that the calculus provides a rigorous programming notation for modelling this and other quantum

Composite Materials: An Educational Need.

Science.gov (United States)

Saliba, Tony E.; Snide, James A.

1990-01-01

Described is the need to incorporate the concepts and applications of advanced composite materials into existing chemical engineering programs. Discussed are the justification for, and implementation of topics including transport phenomena, kinetics and reactor design, unit operations, and product and process design. (CW)

A model for the design and programming of multi-cores

NARCIS (Netherlands)

Jesshope, C.; Grandinetti, L.

2008-01-01

This paper describes a machine/programming model for the era of multi-core chips. It is derived from the sequential model but replaces sequential composition with concurrent composition at all levels in the program except at the level where the compiler is able to make deterministic decisions on

Medicare Program; Prospective Payment System and Consolidated Billing for Skilled Nursing Facilities for FY 2018, SNF Value-Based Purchasing Program, SNF Quality Reporting Program, Survey Team Composition, and Correction of the Performance Period for the NHSN HCP Influenza Vaccination Immunization Reporting

Science.gov (United States)

2017-08-04

This final rule updates the payment rates used under the prospective payment system (PPS) for skilled nursing facilities (SNFs) for fiscal year (FY) 2018. It also revises and rebases the market basket index by updating the base year from 2010 to 2014, and by adding a new cost category for Installation, Maintenance, and Repair Services. The rule also finalizes revisions to the SNF Quality Reporting Program (QRP), including measure and standardized resident assessment data policies and policies related to public display. In addition, it finalizes policies for the Skilled Nursing Facility Value-Based Purchasing Program that will affect Medicare payment to SNFs beginning in FY 2019. The final rule also clarifies the regulatory requirements for team composition for surveys conducted for investigating a complaint and aligns regulatory provisions for investigation of complaints with the statutory requirements. The final rule also finalizes the performance period for the National Healthcare Safety Network (NHSN) Healthcare Personnel (HCP) Influenza Vaccination Reporting Measure included in the End-Stage Renal Disease (ESRD) Quality Incentive Program (QIP) for Payment Year 2020.

Durability of aircraft composite materials

Science.gov (United States)

Dextern, H. B.

1982-01-01

Confidence in the long term durability of advanced composites is developed through a series of flight service programs. Service experience is obtained by installing secondary and primary composite components on commercial and military transport aircraft and helicopters. Included are spoilers, rudders, elevators, ailerons, fairings and wing boxes on transport aircraft and doors, fairings, tail rotors, vertical fins, and horizontal stabilizers on helicopters. Materials included in the evaluation are boron/epoxy, Kevlar/epoxy, graphite/epoxy and boron/aluminum. Inspection, maintenance, and repair results for the components in service are reported. The effects of long term exposure to laboratory, flight, and outdoor environmental conditions are reported for various composite materials. Included are effects of moisture absorption, ultraviolet radiation, and aircraft fuels and fluids.

7 CFR 3400.11 - Composition of peer review groups.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Composition of peer review groups. 3400.11 Section..., EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE SPECIAL RESEARCH GRANTS PROGRAM Scientific Peer Review of Research Grant Applications § 3400.11 Composition of peer review groups. (a) Peer review group...

Material Programming

DEFF Research Database (Denmark)

Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

2017-01-01

. Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

Reactions of Hydrogen Chloride and Boron Trichloride with Trimethylsilylamino Groups

Science.gov (United States)

1989-04-04

SUPPLEMENTARY NOTATION 17, COSATI CODES 18. SUBJECT TERMS (Continue on reverse if necessary and kientify by block number) FIELD ,,GROUP SU8 -GROUP...nitride preceramic polymers . Due to the low yield multistage synthesis, alternate routes to isomeric compositions and intermediates needed to be...Organo- metallic Polymers , Zeldin, M., Wynne, K. J., Allcock, H. R.; Ed, ACS Symposium Series 360. (4) Ebsworth, E.A.V. Volatile Silicon Compounds

Raters’ Perception and Expertise in Evaluating Second Language Compositions

Directory of Open Access Journals (Sweden)

Houman Bijani

2010-11-01

Full Text Available The consideration of rater training is very important in construct validation of a writing test because it is through training that raters are adapted to the use of students’ writing ability instead of their own criteria for assessing compositions (Charney, 1984. However, although training has been discussed in the literature of writing assessment, there is little research regarding raters’ perceptions and understandings of the training program. Although a few studies have looked at the differences between trained and untrained raters in writing assessment (Cumming, 1990; Huot, 1990, few studies have used a pre-and post-training design. The purpose of this study is to investigate the effectiveness of the training program on experienced and inexperienced raters with regard to a pre-and post- training design. Twelve EFL raters scored 45 pre-rated benchmark essay compositions by an authorized IELTS trainer. These essay compositions were scored before, during and after the training program. The results regarding the comparison across raters showed that inexperienced raters had wider range of inconsistency before training but they became more consistent than experienced raters after training.

A FRAMEWORK FOR PERFORMANCE EVALUATION AND MONITORING OF PUBLIC HEALTH PROGRAM USING COMPOSITE PERFORMANCE INDEX

Directory of Open Access Journals (Sweden)

Susanta Kumar Gauri

2017-12-01

Full Text Available A public health program (PHP taken up by the government of a country refers to all organized measures to prevent disease and promote health among the population, by providing different planned cares/services to the people. Usually, the target population for different PHP are different. The basic requirement for success of a PHP is to ensure that all the planned cares/services are reached to each member of the target population. Therefore, the important performance measures for a PHP are the implementation status of all the planned cares/services under the PHP. However, management and monitoring of a PHP become quite difficult by interpreting separately the information contained in a large number of performance measures. Therefore, usually a metric, called composite performance index (CPI, is evaluated to understand the overall performance of a PHP. However, due a scaling operation involved in the CPI computation procedure, the CPI value does not reveal the true overall implementation status of a PHP and consequently, it is effective for management of a PHP. This paper presents a new approach for CPI computation, in which scaling/normalization of the performance variables is not required and therefore, it can be used for monitoring the true overall implementation status of a PHP in a region. A systematic approach for monitoring a PHP using the CPI values is proposed and applied for monitoring the maternal and child healthcare (MCH program. The results are found effective towards continuous improvement of implementation status.

Effects of a mini-trampoline rebounding exercise program on functional parameters, body composition and quality of life in overweight women.

Science.gov (United States)

Cugusi, Lucia; Manca, Andrea; Serpe, Roberto; Romita, Giovanni; Bergamin, Marco; Cadeddu, Christian; Solla, Paolo; Mercuro, Giuseppe

2018-03-01

Mini-trampoline rebounding exercise (MRE) is becoming a very popular form of fitness training. Despite awareness of this activity worldwide, a limited number of studies have systematically investigated the health effects correlated with MRE training. The aim of our study was to evaluate manifold health outcomes after 12 weeks of an MRE program in a group of overweight Italian women. Eighteen overweight women (age 38.05±10.5 years, BMI: 27.6±2.1 kg/m2) were enrolled in this study. Functional profile, strength, body composition, quality of life and pain intensity were assessed at baseline and after 12 weeks of MRE. Significant improvements were observed in the measurements of anthropometric profile and body composition (circumferences, fat mass, lean and muscular mass). Both a significant decrease in systolic and diastolic blood pressure values (from 128/80.5 to 123/71 mmHg, P<0.05) and an improvement in lipid and glucose profiles were observed. At maximal exercise testing, an increase in work capacity (from 104 to 123 watts, P=0.003) and VO2max (from 15.4 to 16.9 mL/kg/min, P=0.04) was found. SF-36 showed positive changes in four of the eight items as well as in the Mental Component Summary. With regard to the Brief Pain Inventory-SF, a decrease in both pain severity and the pain interference score was detected. MRE appears feasible to ensure positive effects on overall health and can be proposed to populations that could greatly benefit from training programs, such as overweight women.

Semantically-Rigorous Systems Engineering Modeling Using Sysml and OWL

Science.gov (United States)

Jenkins, J. Steven; Rouquette, Nicolas F.

2012-01-01

The Systems Modeling Language (SysML) has found wide acceptance as a standard graphical notation for the domain of systems engineering. SysML subsets and extends the Unified Modeling Language (UML) to define conventions for expressing structural, behavioral, and analytical elements, and relationships among them. SysML-enabled modeling tools are available from multiple providers, and have been used for diverse projects in military aerospace, scientific exploration, and civil engineering. The Web Ontology Language (OWL) has found wide acceptance as a standard notation for knowledge representation. OWL-enabled modeling tools are available from multiple providers, as well as auxiliary assets such as reasoners and application programming interface libraries, etc. OWL has been applied to diverse projects in a wide array of fields. While the emphasis in SysML is on notation, SysML inherits (from UML) a semantic foundation that provides for limited reasoning and analysis. UML's partial formalization (FUML), however, does not cover the full semantics of SysML, which is a substantial impediment to developing high confidence in the soundness of any conclusions drawn therefrom. OWL, by contrast, was developed from the beginning on formal logical principles, and consequently provides strong support for verification of consistency and satisfiability, extraction of entailments, conjunctive query answering, etc. This emphasis on formal logic is counterbalanced by the absence of any graphical notation conventions in the OWL standards. Consequently, OWL has had only limited adoption in systems engineering. The complementary strengths and weaknesses of SysML and OWL motivate an interest in combining them in such a way that we can benefit from the attractive graphical notation of SysML and the formal reasoning of OWL. This paper describes an approach to achieving that combination.

7 CFR 3415.11 - Composition of peer review groups.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Composition of peer review groups. 3415.11 Section... PROGRAM Scientific Peer Review of Research Grant Applications § 3415.11 Composition of peer review groups. (a) Peer review group members and ad hoc reviewers will be selected based upon their training and...

7 CFR 3411.11 - Composition of peer review groups.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Composition of peer review groups. 3411.11 Section... PROGRAM Scientific Peer Review of Research Grant Applications § 3411.11 Composition of peer review groups. (a) Peer review group members and ad hoc reviewers will be selected based upon their training and...

USDA's National Food and Nutrient Analysis Program (NFNAP) produces high-quality data for USDA food composition databases: Two decades of collaboration.

Science.gov (United States)

Haytowitz, David B; Pehrsson, Pamela R

2018-01-01

For nearly 20years, the National Food and Nutrient Analysis Program (NFNAP) has expanded and improved the quantity and quality of data in US Department of Agriculture's (USDA) food composition databases (FCDB) through the collection and analysis of nationally representative food samples. NFNAP employs statistically valid sampling plans, the Key Foods approach to identify and prioritize foods and nutrients, comprehensive quality control protocols, and analytical oversight to generate new and updated analytical data for food components. NFNAP has allowed the Nutrient Data Laboratory to keep up with the dynamic US food supply and emerging scientific research. Recently generated results for nationally representative food samples show marked changes compared to previous database values for selected nutrients. Monitoring changes in the composition of foods is critical in keeping FCDB up-to-date, so that they remain a vital tool in assessing the nutrient intake of national populations, as well as for providing dietary advice. Published by Elsevier Ltd.

A Semantics for Modular General Logic Programs

NARCIS (Netherlands)

Etalle, Sandro

1998-01-01

Modular programs are built as a combination of separate modules, which may be developed and verified separately. Therefore, in order to reason over such programs, compositionality plays a crucial role: the semantics of the whole program must be obtainable as a simple function from the semantics of

A semantics for modular general logic programs

NARCIS (Netherlands)

Etalle, S.

1998-01-01

Modular programs are built as a combination of separate modules, which may be developed and verified separately. Therefore, in order to reason over such programs, compositionality plays a crucial role: the semantics of the whole program must be obtainable as a simple function from the semantics of

Feature-Oriented Programming with Object Algebras

NARCIS (Netherlands)

B.C.d.S. Oliveira (Bruno); T. van der Storm (Tijs); A. Loh; W.R. Cook

2013-01-01

htmlabstractObject algebras are a new programming technique that enables a simple solution to basic extensibility and modularity issues in programming languages. While object algebras excel at defining modular features, the composition mechanisms for object algebras (and features) are still

The role of formal specifications

International Nuclear Information System (INIS)

McHugh, J.

1994-01-01

The role of formal requirements specification is discussed under the premise that the primary purpose of such specifications is to facilitate clear and unambiguous communications among the communities of interest for a given project. An example is presented in which the failure to reach such an understanding resulted in an accident at a chemical plant. Following the example, specification languages based on logical formalisms and notations are considered. These are rejected as failing to serve the communications needs of diverse communities. The notion of a specification as a surrogate for a program is also considered and rejected. The paper ends with a discussion of the type of formal notation that will serve the communications role and several encouraging developments are noted

Representation and Analysis of Real-Time Control Structures.

Science.gov (United States)

1980-08-01

external processes which cannot be forced to cooperate with programmed processes through use of a synchronization primitive such as a semaphore [Dijkstre...amounts to each task, but the time slices are synchronized with program execution. The length of the codestrip is determined by the response time...which might be synchronous or asynchronous with respect to the executing task. The notation can represent total and partial orderings among its tasks, and

Beneficios de la notación de Peirce para los conectivos proposicionales binarios

Directory of Open Access Journals (Sweden)

Oscar Abel Cardona-Hurtado

2016-01-01

Full Text Available Background: In traditional binary notation for propositional connectives only some of these ones are taken into account. Throughout the twentieth century several notations were proposed which overcome this flaw, leading to the proposal of interesting mathematical problems. Objective: This paper presents the notation created by the American Charles Peirce, showing some of the properties of this symbols, and evidencing the advantages of these compared to the traditional. Method: the notation proposed by Peirce is described, and some properties of the geometric and algebraic logical character among its connective are verified; also, the possible role of these properties in the traditional notation is analyzed. Results: In addition to several individual properties and multiple relations between the connectives, the symmetries of the full set of binary propositional connective is visually evident in the signs proposed by Peirce. Conclusion: Different benefits of the notation proposed by Peirce, support the conclusion that the usual notation is clearly surpassed by the symbolism designed by the American scientist.

Fetal Programming of Body Composition, Obesity, and Metabolic Function: The Role of Intrauterine Stress and Stress Biology

Directory of Open Access Journals (Sweden)

Sonja Entringer

2012-01-01

Full Text Available Epidemiological, clinical, physiological, cellular, and molecular evidence suggests that the origins of obesity and metabolic dysfunction can be traced back to intrauterine life and supports an important role for maternal nutrition prior to and during gestation in fetal programming. The elucidation of underlying mechanisms is an area of interest and intense investigation. In this perspectives paper we propose that in addition to maternal nutrition-related processes it may be important to concurrently consider the potential role of intrauterine stress and stress biology. We frame our arguments in the larger context of an evolutionary-developmental perspective that supports roles for both nutrition and stress as key environmental conditions driving natural selection and developmental plasticity. We suggest that intrauterine stress exposure may interact with the nutritional milieu, and that stress biology may represent an underlying mechanism mediating the effects of diverse intrauterine perturbations, including but not limited to maternal nutritional insults (undernutrition and overnutrition, on brain and peripheral targets of programming of body composition, energy balance homeostasis, and metabolic function. We discuss putative maternal-placental-fetal endocrine and immune/inflammatory candidate mechanisms that may underlie the long-term effects of intrauterine stress. We conclude with a commentary of the implications for future research and clinical practice.

Safety of GM crops: compositional analysis.

Science.gov (United States)

Brune, Philip D; Culler, Angela Hendrickson; Ridley, William P; Walker, Kate

2013-09-04

The compositional analysis of genetically modified (GM) crops has continued to be an important part of the overall evaluation in the safety assessment program for these materials. The variety and complexity of genetically engineered traits and modes of action that will be used in GM crops in the near future, as well as our expanded knowledge of compositional variability and factors that can affect composition, raise questions about compositional analysis and how it should be applied to evaluate the safety of traits. The International Life Sciences Institute (ILSI), a nonprofit foundation whose mission is to provide science that improves public health and well-being by fostering collaboration among experts from academia, government, and industry, convened a workshop in September 2012 to examine these and related questions, and a series of papers has been assembled to describe the outcomes of that meeting.

Experimental improvisation practise and notation 1945-1999. An annotated bibliography (2002f). Pdf edition

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

that deal with this subject only more occasionally. Separate from the more general sub-category mentioned above, there is another one going more into details with "Documentation, reports and discussion concerning specific improvisors, groups, works, events, tendencies". Turning to open composition, sections...

Optimization of medium composition for apple rootstocks

African Journals Online (AJOL)

User

2011-05-02

May 2, 2011 ... Key words: Apple rootstocks, medium composition, multiplication rate, plant growth regulators (PGRs). ... be extrapolated with the same success for another .... Analysis System (SAS) software program (SAS Institute Inc. 1999).

Advanced Industrial Materials Program. Annual progress report, FY 1993

Energy Technology Data Exchange (ETDEWEB)

Stooksbury, F. [comp.

1994-06-01

Mission of the AIM program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDAs. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

Thermal Protective Coating for High Temperature Polymer Composites

Science.gov (United States)

Barron, Andrew R.

1999-01-01

The central theme of this research is the application of carboxylate-alumoxane nanoparticles as precursors to thermally protective coatings for high temperature polymer composites. In addition, we will investigate the application of carboxylate-alumoxane nanoparticle as a component to polymer composites. The objective of this research was the high temperature protection of polymer composites via novel chemistry. The significance of this research is the development of a low cost and highly flexible synthetic methodology, with a compatible processing technique, for the fabrication of high temperature polymer composites. We proposed to accomplish this broad goal through the use of a class of ceramic precursor material, alumoxanes. Alumoxanes are nano-particles with a boehmite-like structure and an organic periphery. The technical goals of this program are to prepare and evaluate water soluble carboxylate-alumoxane for the preparation of ceramic coatings on polymer substrates. Our proposed approach is attractive since proof of concept has been demonstrated under the NRA 96-LeRC-1 Technology for Advanced High Temperature Gas Turbine Engines, HITEMP Program. For example, carbon and Kevlar(tm) fibers and matting have been successfully coated with ceramic thermally protective layers.

The composite sequential clustering technique for analysis of multispectral scanner data

Science.gov (United States)

Su, M. Y.

1972-01-01

The clustering technique consists of two parts: (1) a sequential statistical clustering which is essentially a sequential variance analysis, and (2) a generalized K-means clustering. In this composite clustering technique, the output of (1) is a set of initial clusters which are input to (2) for further improvement by an iterative scheme. This unsupervised composite technique was employed for automatic classification of two sets of remote multispectral earth resource observations. The classification accuracy by the unsupervised technique is found to be comparable to that by traditional supervised maximum likelihood classification techniques. The mathematical algorithms for the composite sequential clustering program and a detailed computer program description with job setup are given.

Nutrient Requirements, Body Composition, and Health of Military Women

National Research Council Canada - National Science Library

Costello, Rebecca

1998-01-01

.... As pan of the Defense Women's Health Research Program, a new report from the Committee on Body Composition, Nutrition, and Health of Military Women of the Institute of the Institute of Medicine examines issues of body composition, fitness, and appearance standards and their impact on the health, nutritional status, and performance of active-duty women.

How to use composite indicator and linear programming model for determine sustainable tourism.

Science.gov (United States)

Ziaabadi, Maryam; Malakootian, Mohammad; Zare Mehrjerdi, Mohammad Reza; Jalaee, Seied Abdolmajid; Mehrabi Boshrabadi, Hosein

2017-01-01

The tourism industry which is one of the most dynamic economic activities in today's world plays a significant role in the sustainable development. Therefore, in addition to paying attention to tourism, sustainable tourism must be taken into huge account; otherwise, the environment and its health will be damaged irreparably. To determine the level of sustainability in this study, indicators of sustainable tourism were first presented in three environmental health, economic and social aspects. Then, the levels of sustainable tourism and environmental sustainability were practically measured in different cities of Kerman Province using a composite indicator, a linear programming model, Delphi method and the questionnaire technique. Finally, the study cities (tourist attractions) were ranked. Result of this study showed that unfortunately the tourism opportunities were not used appropriately in these cities and tourist destinations, and that environmental aspect (health and environmental sustainability) had very bad situations compared to social and economic aspects. In other words, environmental health had the lowest levels of sustainability. The environment is a place for all human activities like tourism, social and economic issues; therefore, its stability and health is of great importance. Thus, it is necessary to pay more attention to sustainability of activities, management and environmental health in planning sustainable development in regional and national policy.

Composites for Exploration Upper Stage

Science.gov (United States)

Fikes, J. C.; Jackson, J. R.; Richardson, S. W.; Thomas, A. D.; Mann, T. O.; Miller, S. G.

2016-01-01

The Composites for Exploration Upper Stage (CEUS) was a 3-year, level III project within the Technology Demonstration Missions program of the NASA Space Technology Mission Directorate. Studies have shown that composites provide important programmatic enhancements, including reduced weight to increase capability and accelerated expansion of exploration and science mission objectives. The CEUS project was focused on technologies that best advanced innovation, infusion, and broad applications for the inclusion of composites on future large human-rated launch vehicles and spacecraft. The benefits included near- and far-term opportunities for infusion (NASA, industry/commercial, Department of Defense), demonstrated critical technologies and technically implementable evolvable innovations, and sustained Agency experience. The initial scope of the project was to advance technologies for large composite structures applicable to the Space Launch System (SLS) Exploration Upper Stage (EUS) by focusing on the affordability and technical performance of the EUS forward and aft skirts. The project was tasked to develop and demonstrate critical composite technologies with a focus on full-scale materials, design, manufacturing, and test using NASA in-house capabilities. This would have demonstrated a major advancement in confidence and matured the large-scale composite technology to a Technology Readiness Level 6. This project would, therefore, have bridged the gap for providing composite application to SLS upgrades, enabling future exploration missions.

Aspect-Oriented Programming Using Composition Filters, in Object-Oriented Technology

NARCIS (Netherlands)

Aksit, Mehmet; Demeyer, S.; Bosch, H.G.P.; Tekinerdogan, B.

Software engineers may experience problems in modeling certain aspects while applying object-oriented techniques [4, 10, 11]. Composition-Filters are capable of expressing various different kinds of aspects in a uniform manner. These aspects are, for example, inheritance and delegation [1] and

MRI: Modular reasoning about interference in incremental programming

OpenAIRE

Oliveira, Bruno C. D. S; Schrijvers, Tom; Cook, William R

2012-01-01

Incremental Programming (IP) is a programming style in which new program components are defined as increments of other components. Examples of IP mechanisms include: Object-oriented programming (OOP) inheritance, aspect-oriented programming (AOP) advice and feature-oriented programming (FOP). A characteristic of IP mechanisms is that, while individual components can be independently defined, the composition of components makes those components become tightly coupled, sh...

Untitled

Indian Academy of Sciences (India)

We denote by W A V the composition of V. V with the bundle map. T*M (3 T M & A. T. M. - A2 T M (3 AP T4 M arising from alternating of the first two factors. By Ricci identities VA Voss. Ko is an algebraic operator depending linearly on curvature tensor of M. More precisely, in terms of classical tensor notation (cf. (4), p. 130),.

SOILSOLN: A Program for Teaching Equilibria Modeling of Soil Solution Composition.

Science.gov (United States)

Wolt, Jeffrey D.

1989-01-01

Presents a computer program for use in teaching ion speciation in soil solutions. Provides information on the structure of the program, execution, and software specifications. The program estimates concentrations of ion pairs, hydrolytic species, metal-organic complexes, and free ions in solutions. (Author/RT)

Composite flywheel development completion report, May 1--September 30, 1976

Energy Technology Data Exchange (ETDEWEB)

Huddleston, R. L.; Kelly, J. J.; Knight, C. E.

1977-05-01

The program to design, fabricate, and performance test a prototype, vehicular-sized, composite flywheel is described. The overall program scope encompasses development of both the flywheel and its containment; however, the FY 1976-1976T objective was directed toward development of the flywheel and testing it in existing facilities. The development effort was successful, leading to successful testing of a flywheel design which demonstrated an energy density performance of 10.1 Wh/lb during spin testing. The initial application selected for development of the composite flywheel was the heat engine/flywheel hybrid propulsion system for a vehicle. This application was selected by the ERDA Advanced Physical Methods Branch staff because of its high potential for conservation of petroleum fuel in both the near and far-term time frames. Other applications, such as utility load leveling, represent potential areas for significant energy savings but require more extensive development programs and funding resources. Successful development of a high-performance, composite, vehicular flywheel represents one step along the development path leading toward larger, higher-energy storage flywheel applications.

Development of Textile Reinforced Composites for Aircraft Structures

Science.gov (United States)

Dexter, H. Benson

1998-01-01

NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

The Musical Language of Kazimierz Serocki in the Light of the Composer’s Self-Reflection

Directory of Open Access Journals (Sweden)

Lindstedt Iwona

2015-12-01

Full Text Available The article is an attempt to reconstruct the fundamental elements of Kazimierz Serocki’s musical language on the basis of his own statements concerning his music. Those statements come first and foremost from his lectures prepared for the Meisterkurs für Komposition at the Musik-Akademie in Basel (1976, whose manuscripts are now held in the Polish Composers’ Archive of the University of Warsaw Library. The lecture texts (Notations- und Realisationsprobleme, Klangfarben als Kompositionsmaterial, Chance der offenen Form present a whole set of problems which Serocki considered as the most important for his method of composition. The central place among these problems is occupied by the idea of “composing with sound colour” (“mit Klangfarben komponieren”. Sound colour plays a decisive role in the creative process, as it constitutes self-sufficient material for composition. Sound colour has a form-shaping role in the musical work, since it can build sequences of sound structures in various configurations, which perform various functions in the piece. The idea of composing with sound colour is presented by the composer in the context of an adequate way of notating sound phenomena and the possibility of performing music from such notation. This idea was also related in the lectures to the principles of constructing polyvalent open forms (mehrdeutige Form out of small- and large-scale components. Pitch organisation, on the other hand, remains of secondary interest in the composer’s commentaries. Serocki’s self-reflection provides us with original and innovative answers to the most important problems that contemporary composers have had to face in their work. It also provides significant and hitherto frequently little-known insights into the components of the unique style of the author of Pianophonie, and these insights can be effectively utilised in the course of future research on Serocki’s work.

Stochastic Pseudo-Boolean Optimization

Science.gov (United States)

2011-07-31

16 polyominoes. Given this notation, we provide the following nonlinear mixed integer programming (MIP) formulation of the exact tiling problem: PNL ...ri, cj ≥ 0 ∀ i, j, p, q, k. 8.3.3 Linear Set Partitioning Formulation We use value disjunctions to reformulate PNL as a linear MIP that can be

Behaviour of steel-concrete composite beams using bolts as shear connectors

Science.gov (United States)

Tran, Minh-Tung; Nguyen Van Do, Vuong; Nguyen, Tuan-Anh

2018-04-01

The paper presents an experimental program on the application of bolts as shear connectors for steel-composite beams. Four steel- concrete composite beams and a reference steel beam were made and tested. The aim of the testing program is to examine which forms of the steel bolts can be used effectively for steel-composite beams. The four types of the bolts include: Type 1 the bolt with the nut at the end; Type 2 the bolt bending at 900 hook; Type 3 the bolt without the nut at the end and Type 4 the bolt with the nut at the end but connected with the steel beam by hand welding in other to be connected with the steel beam by bolt connection as in the first three types. The test results showed that beside the traditional shear connectors like shear studs, angle type, channel type, bolts can be used effectively as the shear connectors in steel-composite beams and the application of bolts in Types 1 and 2 in the composite beams gave the better performance for the tested beam.

Using spatial manipulation to examine interactions between visual and auditory encoding of pitch and time

Directory of Open Access Journals (Sweden)

Neil M McLachlan

2010-12-01

Full Text Available Music notations use both symbolic and spatial representation systems. Novice musicians do not have the training to associate symbolic information with musical identities, such as chords or rhythmic and melodic patterns. They provide an opportunity to explore the mechanisms underpinning multimodal learning when spatial encoding strategies of feature dimensions might be expected to dominate. In this study, we applied a range of transformations (such as time reversal to short melodies and rhythms and asked novice musicians to identify them with or without the aid of notation. Performance using a purely spatial (graphic notation was contrasted with the more symbolic, traditional western notation over a series of weekly sessions. The results showed learning effects for both notation types, but performance improved more for graphic notation. This points to greater compatibility of auditory and visual neural codes for novice musicians when using spatial notation, suggesting that pitch and time may be spatially encoded in multimodal associative memory. The findings also point to new strategies for training novice musicians.

Flight service evaluation of an advanced composite empennage component on commercial transport aircraft. Phase 1: Engineering development

Science.gov (United States)

Ary, A.; Axtell, C.; Fogg, L.; Jackson, A.; James, A. M.; Mosesian, B.; Vanderwier, J.; Vanhamersveld, J.

1976-01-01

The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes the front and rear spars. Various design options were evaluated to arrive at a configuration which would offer the highest potential for satisfying program objectives. The preferred configuration selected consists of a hat-stiffened cover with molded integrally stiffened spars, aluminum trussed composite ribs, and composite miniwich web ribs with integrally molded caps. Material screening tests were performed to select an advanced composite material system for the Advanced Composite Vertical Fin (ACFV) that would meet the program requirements from the standpoint of quality, reproducibility, and cost. Preliminary weight and cost analysis were made, targets established, and tracking plans developed. These include FAA certification, ancillary test program, quality control, and structural integrity control plans.

Critical joints in large composite primary aircraft structures. Volume 1: Technical summary

Science.gov (United States)

Bunin, Bruce L.

1985-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. In fulfilling this objective, analytical procedures for joint design and analysis were developed during Phase 1 of the program. Tests were conducted at the element level to supply the empirical data required for methods development. Large composite multirow joints were tested to verify the selected design concepts and for correlation with analysis predictions. The Phase 2 program included additional tests to provide joint design and analysis data, and culminated with several technology demonstration tests of a major joint area representative of a commercial transport wing. The technology demonstration program of Phase 2 is discussed. The analysis methodology development, structural test program, and correlation between test results and analytical strength predictions are reviewed.

A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials

International Nuclear Information System (INIS)

Raynal, J.

1963-01-01

The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [fr

Bulk metallic glass matrix composite for good biocompatibility

International Nuclear Information System (INIS)

Hadjoub, F; Metiri, W; Doghmane, A; Hadjoub, Z

2012-01-01

Reinforcement volume fraction effects on acoustical parameters of Zr 41.2 Ti 13.8 Cu 12.5 Ni 10 Be 22.5 matrix composites reinforced by Mg, Ag and Cd metals have been studied via a simulation program based on acoustic microscopy technique. Moreover, acoustical parameters of human bone were compared to those of BMGs in both monolithic and reinforced case. It was found that elastic behavior of BMGs matrix composites in high reinforcement volume fraction is similar of that of human bone. This behavior leads to high biocompatibility and good transfer of stress between composite material and human system.

An Integrated, Layered-Spinel Composite Cathode for Energy Storage Applications

Science.gov (United States)

Hagh, Nader; Skandan, Ganesh

2012-01-01

At low operating temperatures, commercially available electrode materials for lithium-ion batteries do not fully meet the energy and power requirements for NASA fs exploration activities. The composite cathode under development is projected to provide the required energy and power densities at low temperatures and its usage will considerably reduce the overall volume and weight of the battery pack. The newly developed composite electrode material can provide superior electrochemical performance relative to a commercially available lithium cobalt system. One advantage of using a composite cathode is its higher energy density, which can lead to smaller and lighter battery packs. In the current program, different series of layered-spinel composite materials with at least two different systems in an integrated structure were synthesized, and the volumetric and gravimetric energy densities were evaluated. In an integrated network of a composite electrode, the effect of the combined structures is to enhance the capacity and power capabilities of the material to levels greater than what is possible in current state-of-the-art cathode systems. The main objective of the current program is to implement a novel cathode material that meets NASA fs low temperature energy density requirements. An important feature of the composite cathode is that it has at least two components (e.g., layered and spinel) that are structurally integrated. The layered material by itself is electrochemically inactive; however, upon structural integration with a spinel material, the layered material can be electrochemically activated, thereby delivering a large amount of energy with stable cycling. A key aspect of the innovation has been the development of a scalable process to produce submicronand micron-scale particles of these composite materials. An additional advantage of using such a composite electrode material is its low irreversible loss (.5%), which is primarily due to the unique activation

Characterization and manufacture of braided composites for large commercial aircraft structures

Science.gov (United States)

Fedro, Mark J.; Willden, Kurtis

1992-01-01

Braided composite materials, one of the advanced material forms which is under investigation in Boeing's ATCAS program, have been recognized as a potential cost-effective material form for fuselage structural elements. Consequently, there is a strong need for more knowledge in the design, manufacture, test, and analysis of textile structural composites. The overall objective of this work is to advance braided composite technology towards applications to a large commercial transport fuselage. This paper summarizes the mechanics of materials and manufacturing demonstration results which have been obtained in order to acquire an understanding of how braided composites can be applied to a commercial fuselage. Textile composites consisting of 1D, 2D triaxial, and 3D braid patterns with thermoplastic and two RTM resin systems were investigated. The structural performance of braided composites was evaluated through an extensive mechanical test program. Analytical methods were also developed and applied to predict the following: internal fiber architectures, stiffnesses, fiber stresses, failure mechanisms, notch effects, and the entire history of failure of the braided composites specimens. The applicability of braided composites to a commercial transport fuselage was further assessed through a manufacturing demonstration. Three foot fuselage circumferential hoop frames were manufactured to demonstrate the feasibility of consistently producing high quality braided/RTM composite primary structures. The manufacturing issues (tooling requirements, processing requirements, and process/quality control) addressed during the demonstration are summarized. The manufacturing demonstration in conjunction with the mechanical test results and developed analytical methods increased the confidence in the ATCAS approach to the design, manufacture, test, and analysis of braided composites.

Advanced powder metallurgy aluminum alloys and composites

Science.gov (United States)

Lisagor, W. B.; Stein, B. A.

1982-01-01

The differences between powder and ingot metallurgy processing of aluminum alloys are outlined. The potential payoff in the use of advanced powder metallurgy (PM) aluminum alloys in future transport aircraft is indicated. The national program to bring this technology to commercial fruition and the NASA Langley Research Center role in this program are briefly outlined. Some initial results of research in 2000-series PM alloys and composites that highlight the property improvements possible are given.

Multi scale analysis by acoustic emission of damage mechanisms in natural fibre woven fabrics/epoxy composites.

Directory of Open Access Journals (Sweden)

Touchard F.

2010-06-01

Full Text Available This paper proposes to develop an experimental program to characterize the type and the development of damage in composite with complex microstructure. A multi-scale analysis by acoustic emission has been developed and applied to hemp fibre woven fabrics/epoxy composite. The experimental program consists of tensile tests performed on single yarn, neat epoxy resin and composite materials to identify their AE amplitude signatures. A statistical analysis of AE amplitude signals has been realised and correlated with microscopic observations. Results have enabled to identify three types of damage in composites and their associated AE amplitudes: matrix cracking, interfacial debonding and reinforcement damage and fracture. Tracking of these damage mechanisms in hemp/epoxy composites has been performed to show the process of damage development in natural fibre reinforced composites.

49 CFR 383.73 - State procedures.

Science.gov (United States)

2010-10-01

... paragraph (a)(3) for drivers renewing a CDL for the first time after September 30, 2002, provided a notation... record prior to issuing a CDL, or at any time after the CDL is issued, that the applicant falsified... Medical Programs is designated as the keeper of the list of State contacts for receiving medical variance...

Dating Violence and Sexual Assault Prevention with African American Middle Schoolers: Does Group Gender Composition Impact Dating Violence Attitudes?

Science.gov (United States)

Black, Beverly M.; Weisz, Arlene N.; Jayasundara, Dheeshana S.

2012-01-01

A dating violence and sexual assault prevention program was presented to 396, predominately African American, middle schoolers in two inner city schools in the United States. In one school the program was offered with a same-gender group composition; in the other school, the same program was offered with mixed-gender group composition. A…

Superdense Coding with GHZ and Quantum Key Distribution with W in the ZX-calculus

Directory of Open Access Journals (Sweden)

Anne Hillebrand

2012-10-01

Full Text Available Quantum entanglement is a key resource in many quantum protocols, such as quantum teleportation and quantum cryptography. Yet entanglement makes protocols presented in Dirac notation difficult to verify. This is why Coecke and Duncan have introduced a diagrammatic language for quantum protocols, called the ZX-calculus. This diagrammatic notation is both intuitive and formally rigorous. It is a simple, graphical, high level language that emphasises the composition of systems and naturally captures the essentials of quantum mechanics. In the author's MSc thesis it has been shown for over 25 quantum protocols that the ZX-calculus provides a relatively easy and more intuitive presentation. Moreover, the author embarked on the task to apply categorical quantum mechanics on quantum security; earlier works did not touch anything but Bennett and Brassard's quantum key distribution protocol, BB84. Superdense coding with the Greenberger-Horne-Zeilinger state and quantum key distribution with the W-state are presented in the ZX-calculus in this paper.

Structural Acoustic Physics Based Modeling of Curved Composite Shells

Science.gov (United States)

2017-09-19

NUWC-NPT Technical Report 12,236 19 September 2017 Structural Acoustic Physics -Based Modeling of Curved Composite Shells Rachel E. Hesse...SUBTITLE Structural Acoustic Physics -Based Modeling of Curved Composite Shells 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...study was to use physics -based modeling (PBM) to investigate wave propagations through curved shells that are subjected to acoustic excitation. An

In vivo body composition studies in malnourished patients

International Nuclear Information System (INIS)

Allen, B.J.; Blagojevic, N.

1987-01-01

The establishment of an in vivo TBN facility at Lucas Heights, together with measurement techniques for whole body and extracellular water, is leading to an expanded interest in the relationships between clinical status, body composition and dietary regimes. The ANSTO program provides the opportunity for the first quantitative assessments of these factors in Australia. Body composition studies provide a common link with other-wise unrelated physiological or psychological diseases, and a pool of normal data is being established. Substantial improvements in patient care and quality of life should result from this project, together with a deeper understanding of the importance of body composition in disease-induced malnutrition

In vivo body composition studies in malnourished patients

Energy Technology Data Exchange (ETDEWEB)

Allen, B J; Blagojevic, N

1987-09-01

The establishment of an in vivo TBN facility at Lucas Heights, together with measurement techniques for whole body and extracellular water, is leading to an expanded interest in the relationships between clinical status, body composition and dietary regimes. The ANSTO program provides the opportunity for the first quantitative assessments of these factors in Australia. Body composition studies provide a common link with other-wise unrelated physiological or psychological diseases, and a pool of normal data is being established. Substantial improvements in patient care and quality of life should result from this project, together with a deeper understanding of the importance of body composition in disease-induced malnutrition.

Using laser absorption spectroscopy to monitor composition and physical properties of metal vapors

International Nuclear Information System (INIS)

Berzins, L.V.

1993-01-01

The Atomic Vapor Laser Isotope Separation (AVLIS) program has been using laser absorption spectroscopy to monitor vapor densities for over 15 years. Laser absorption spectroscopy has proven itself to be an accurate and reliable method to monitor both density and composition. During this time the diagnostic has moved from a research tool toward a robust component of a process control system. The hardware used for this diagnostic is discussed elsewhere at this symposium. This paper describes how the laser absorption spectroscopy diagnostic is used as a component of a process control system as well as supplying detailed measurements on vapor densities, composition, flow velocity, internal and kinetic temperatures, and constituent distributions. Examples will be drawn from the uranium AVLIS program. In addition potential applications such as composition control in the production of metal matrix composites or aircraft alloys will be discussed

Optimized Breech Location in the Harry Diamond Laboratories 4-Inch Gas Gun

Science.gov (United States)

1982-04-01

equation can be deduced from the program, it is camouflaged by changes in notation and is repeated here. PAY/ Ma2 = [u-N/(N +1)](1 —u/N)1 + N/(N + 1...AERO-ASTRONAUTICAL ENGINEERING ATTN PROF TING YI LI 2036 NEIL AVENUE COLUMBUS, OH 43210 OCEANICS, INC ATTN DR. PAUL KAPLAN PLAINVIEW LONG ISLAND

78 FR 30861 - Sunshine Act Meeting

Science.gov (United States)

2013-05-23

.... Briefing Agenda--9:30 a.m.-3:00 p.m. This briefing is open to the public. Topic: Protecting the Civil... Commissioners VI. Adjourn Briefing Meeting Agenda--3:00 p.m. I. Approval of Agenda II. Results of Notational... Chief, Regional Programs Coordination Unit. [FR Doc. 2013-12389 Filed 5-21-13; 11:15 am] BILLING CODE...

Micromechanisms of damage in unidirectional fiber reinforced composites

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Brøndsted, Povl

2009-01-01

strength of a composite at the pre-critical load, while the fibers with randomly distributed strengths lead to the higher strength of the composite at post-critical loads. In the case of randomly distributed fiber strengths, the damage growth in fibers seems to be almost independent from the crack length...... in the numerical experiments. The effect of the statistical variability of fiber strengths, viscosity of the polymer matrix as well as the interaction between the damage processes in matrix, fibers and interface are investigated numerically. It is demonstrated that fibers with constant strength ensure higher......Numerical micromechanical investigations of the mechanical behavior and damage evolution of glass fiber reinforced composites are presented. A program code for the automatic generation of 3D micromechanical unit cell models of composites with damageable elements is developed, and used...

STREAM: A First Programming Process

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Kölling, Michael

2009-01-01

to derive a programming process, STREAM, designed specifically for novices. STREAM is a carefully down-scaled version of a full and rich agile software engineering process particularly suited for novices learning object-oriented programming. In using it we hope to achieve two things: to help novice......Programming is recognized as one of seven grand challenges in computing education. Decades of research have shown that the major problems novices experience are composition-based—they may know what the individual programming language constructs are, but they do not know how to put them together....... Despite this fact, textbooks, educational practice, and programming education research hardly address the issue of teaching the skills needed for systematic development of programs. We provide a conceptual framework for incremental program development, called Stepwise Improvement, which unifies best...

What makes a good process model? Lessons learned from process mining

NARCIS (Netherlands)

Aalst, van der W.M.P.

2012-01-01

There seems to be a never ending stream of new process modeling notations. Some of these notations are foundational and have been around for decades (e.g., Petri nets). Other notations are vendor specific, incremental, or are only popular for a short while. Discussions on the various competing

Analytical method for predicting plastic flow in notched fiber composite materials

International Nuclear Information System (INIS)

Flynn, P.L.; Ebert, L.J.

1977-01-01

An analytical system was developed for prediction of the onset and progress of plastic flow of oriented fiber composite materials in which both externally applied complex stress states and stress raisers were present. The predictive system was a unique combination of two numerical systems, the ''SAAS II'' finite element analysis system and a micromechanics finite element program. The SAAS II system was used to generate the three-dimensional stress distributions, which were used as the input into the finite element micromechanics program. Appropriate yielding criteria were then applied to this latter program. The accuracy of the analytical system was demonstrated by the agreement between the analytically predicted and the experimentally measured flow values of externally notched tungsten wire reinforced copper oriented fiber composites, in which the fiber fraction was 50 vol pct

BILAM: a composite laminate failure-analysis code using bilinear stress-strain approximations

Energy Technology Data Exchange (ETDEWEB)

McLaughlin, P.V. Jr.; Dasgupta, A.; Chun, Y.W.

1980-10-01

The BILAM code which uses constant strain laminate analysis to generate in-plane load/deformation or stress/strain history of composite laminates to the point of laminate failure is described. The program uses bilinear stress-strain curves to model layer stress-strain behavior. Composite laminates are used for flywheels. The use of this computer code will help to develop data on the behavior of fiber composite materials which can be used by flywheel designers. In this program the stress-strain curves are modelled by assuming linear response in axial tension while using bilinear approximations (2 linear segments) for stress-strain response to axial compressive, transverse tensile, transverse compressive and axial shear loadings. It should be noted that the program attempts to empirically simulate the effects of the phenomena which cause nonlinear stress-strain behavior, instead of mathematically modelling the micromechanics involved. This code, therefore, performs a bilinear laminate analysis, and, in conjunction with several user-defined failure interaction criteria, is designed to provide sequential information on all layer failures up to and including the first fiber failure. The modus operandi is described. Code BILAM can be used to: predict the load-deformation/stress-strain behavior of a composite laminate subjected to a given combination of in-plane loads, and make analytical predictions of laminate strength.

Developmental assessment of the Fort St. Vrain version of the composite HTGR analysis program (CHAP-2)

International Nuclear Information System (INIS)

Stroh, K.R.

1981-01-01

The Composite HTGR Analysis Program (CHAP) consists of a model-independent systems analysis mainframe named LASAN and model-dependent linked code modules, each representing a component, subsystem, or phenomenon of an HTGR plant. The Fort St. Vrain version (CHAP-2) includes 21 coded modules that model the neutron kinetics and thermal response of the core; the thermal-hydraulics of the reactor primary coolant system, secondary steam supply system, and balance-of-plant; the actions of the control system and plant protection system; the response of the reactor building; and the relative hazard resulting from fuel particle failure. FSV steady-state and transient plant data are being used to partially verify the component modeling and dynamic simulation techniques used to predict plant response to postulated accident sequences. Results of these preliminary validation efforts are presented showing good agreement between code output and plant data for the portions of the code that have been tested. Plans for further development and assessment as well as application of the validated code are discussed. (author)

Computing Equilibrium Chemical Compositions

Science.gov (United States)

Mcbride, Bonnie J.; Gordon, Sanford

1995-01-01

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

Composite Measures of Health Care Provider Performance: A Description of Approaches

Science.gov (United States)

Shwartz, Michael; Restuccia, Joseph D; Rosen, Amy K

2015-01-01

Context Since the Institute of Medicine’s 2001 report Crossing the Quality Chasm, there has been a rapid proliferation of quality measures used in quality-monitoring, provider-profiling, and pay-for-performance (P4P) programs. Although individual performance measures are useful for identifying specific processes and outcomes for improvement and tracking progress, they do not easily provide an accessible overview of performance. Composite measures aggregate individual performance measures into a summary score. By reducing the amount of data that must be processed, they facilitate (1) benchmarking of an organization’s performance, encouraging quality improvement initiatives to match performance against high-performing organizations, and (2) profiling and P4P programs based on an organization’s overall performance. Methods We describe different approaches to creating composite measures, discuss their advantages and disadvantages, and provide examples of their use. Findings The major issues in creating composite measures are (1) whether to aggregate measures at the patient level through all-or-none approaches or the facility level, using one of the several possible weighting schemes; (2) when combining measures on different scales, how to rescale measures (using z scores, range percentages, ranks, or 5-star categorizations); and (3) whether to use shrinkage estimators, which increase precision by smoothing rates from smaller facilities but also decrease transparency. Conclusions Because provider rankings and rewards under P4P programs may be sensitive to both context and the data, careful analysis is warranted before deciding to implement a particular method. A better understanding of both when and where to use composite measures and the incentives created by composite measures are likely to be important areas of research as the use of composite measures grows. PMID:26626986

Universal Style Sheet Language Environment Modification for the Business Use

Directory of Open Access Journals (Sweden)

Jiří Brázdil

2014-01-01

Full Text Available This paper deals with the description of USSL – Universal Style Sheet Language environment. USSL style sheet language is platform-independent and its primary focus is the declarative notation of the appearance of GUI libraries used by imperative programming languages. The implementation of the software support for wxWidgets library is made, because this library has no support for the separate declarative notation of the appearance via style sheet language. The separation of the appearance enables us to reuse and standardize the appearance notation and the independent development of the appearance. In this way it is possible to achieve consistent appearance of applications of specific set or even all of company software products. However, the first proposal of the USSL has several disadvantages which restrict the possibilities for practical use in business or other environment. These disadvantages are: the lack of @import rule for importing other style sheets, USSL only supports basic set of selectors compared with selectors of other style sheet languages for desktop environment such as Qt QSS and GTK+ GtkCssProvider, the lack of styling of the cursors, it is impossible to put down URL. The placement of widgets and its borders are not solved either. This paper contains suggestions for solving these issues.

Synthesis and processing of composites by reactive metal penetration

Energy Technology Data Exchange (ETDEWEB)

Loehman, R.E.; Ewsuk, K.G. [Sandia National Laboratories, Albuquerque, NM (United States); Tomsia, A.P. [Pask Research and Engineering, Berkeley, CA (United States)] [and others

1995-05-01

Ceramic-metal composites are being developed because their high stiffness-to weight ratios, good fracture toughness, and variable electrical and thermal properties give them advantages over more conventional materials. However, because ceramic-metal composite components presently are more expensive than monolithic materials, improvements in processing are required to reduce manufacturing costs. Reactive metal penetration is a promising new method for making ceramic- and metal-matrix composites that has the advantage of being inherently a net-shape process. This technique, once fully developed, will provide another capability for manufacturing the advanced ceramic composites that are needed for many light-weight structural and wear applications. The lower densities of these composites lead directly to energy savings in use. Near-net-shape fabrication of composite parts should lead to additional savings because costly and energy intensive grinding and machining operations are significantly reduced, and the waste generated from such finishing operations is minimized. The goals of this research program are: (1) to identify feasible compositional systems for making composites by reactive metal penetration; (2) to understand the mechanism(s) of composite formation by reactive metal penetration; and (3) to learn how to control and optimize reactive metal penetration for economical production of composites and composite coatings.

Composites Materials and Manufacturing Technologies for Space Applications

Science.gov (United States)

Vickers, J. H.; Tate, L. C.; Gaddis, S. W.; Neal, R. E.

2016-01-01

Composite materials offer significant advantages in space applications. Weight reduction is imperative for deep space systems. However, the pathway to deployment of composites alternatives is problematic. Improvements in the materials and processes are needed, and extensive testing is required to validate the performance, qualify the materials and processes, and certify components. Addressing these challenges could lead to the confident adoption of composites in space applications and provide spin-off technical capabilities for the aerospace and other industries. To address the issues associated with composites applications in space systems, NASA sponsored a Technical Interchange Meeting (TIM) entitled, "Composites Materials and Manufacturing Technologies for Space Applications," the proceedings of which are summarized in this Conference Publication. The NASA Space Technology Mission Directorate and the Game Changing Program chartered the meeting. The meeting was hosted by the National Center for Advanced Manufacturing (NCAM)-a public/private partnership between NASA, the State of Louisiana, Louisiana State University, industry, and academia, in association with the American Composites Manufacturers Association. The Louisiana Center for Manufacturing Sciences served as the coordinator for the TIM.

Methods for robustness programming

NARCIS (Netherlands)

Olieman, N.J.

2008-01-01

Robustness of an object is defined as the probability that an object will have properties as required. Robustness Programming (RP) is a mathematical approach for Robustness estimation and Robustness optimisation. An example in the context of designing a food product, is finding the best composition

Optimal fabrication processes for unidirectional metal-matrix composites: A computational simulation

Science.gov (United States)

Saravanos, D. A.; Murthy, P. L. N.; Morel, M.

1990-01-01

A method is proposed for optimizing the fabrication process of unidirectional metal matrix composites. The temperature and pressure histories are optimized such that the residual microstresses of the composite at the end of the fabrication process are minimized and the material integrity throughout the process is ensured. The response of the composite during the fabrication is simulated based on a nonlinear micromechanics theory. The optimal fabrication problem is formulated and solved with non-linear programming. Application cases regarding the optimization of the fabrication cool-down phases of unidirectional ultra-high modulus graphite/copper and silicon carbide/titanium composites are presented.

Optimal fabrication processes for unidirectional metal-matrix composites - A computational simulation

Science.gov (United States)

Saravanos, D. A.; Murthy, P. L. N.; Morel, M.

1990-01-01

A method is proposed for optimizing the fabrication process of unidirectional metal matrix composites. The temperature and pressure histories are optimized such that the residual microstresses of the composite at the end of the fabrication process are minimized and the material integrity throughout the process is ensured. The response of the composite during the fabrication is simulated based on a nonlinear micromechanics theory. The optimal fabrication problem is formulated and solved with nonlinear programming. Application cases regarding the optimization of the fabrication cool-down phases of unidirectional ultra-high modulus graphite/copper and silicon carbide/titanium composites are presented.

Programs as Polypeptides.

Science.gov (United States)

Williams, Lance R

2016-01-01

Object-oriented combinator chemistry (OOCC) is an artificial chemistry with composition devices borrowed from object-oriented and functional programming languages. Actors in OOCC are embedded in space and subject to diffusion; since they are neither created nor destroyed, their mass is conserved. Actors use programs constructed from combinators to asynchronously update their own states and the states of other actors in their neighborhoods. The fact that programs and combinators are themselves reified as actors makes it possible to build programs that build programs from combinators of a few primitive types using asynchronous spatial processes that resemble chemistry as much as computation. To demonstrate this, OOCC is used to define a parallel, asynchronous, spatially distributed self-replicating system modeled in part on the living cell. Since interactions among its parts result in the construction of more of these same parts, the system is strongly constructive. The system's high normalized complexity is contrasted with that of a simple composome.

Current Challenges in Development of a Database of Three-Dimensional Chemical Structures

Science.gov (United States)

Maeda, Miki H.

2015-01-01

We are developing a database named 3DMET, a three-dimensional structure database of natural metabolites. There are two major impediments to the creation of 3D chemical structures from a set of planar structure drawings: the limited accuracy of computer programs and insufficient human resources for manual curation. We have tested some 2D–3D converters to convert 2D structure files from external databases. These automatic conversion processes yielded an excessive number of improper conversions. To ascertain the quality of the conversions, we compared IUPAC Chemical Identifier and canonical SMILES notations before and after conversion. Structures whose notations correspond to each other were regarded as a correct conversion in our present work. We found that chiral inversion is the most serious factor during the improper conversion. In the current stage of our database construction, published books or articles have been resources for additions to our database. Chemicals are usually drawn as pictures on the paper. To save human resources, an optical structure reader was introduced. The program was quite useful but some particular errors were observed during our operation. We hope our trials for producing correct 3D structures will help other developers of chemical programs and curators of chemical databases. PMID:26075200

Wear resistant composite structure of vitreous carbon containing convoluted fibers. Final report

Energy Technology Data Exchange (ETDEWEB)

Burton, R.G.; Burton, R.A.

1996-05-28

Energy Related Inventions Program Number 613 was a two year program to commercialize a unique new wear material, Metal Reinforced Carbon Composite, MRCC. The program was designed to manufacture sample components of MRCC for evaluation by potential users and manufacturers. As a result of the program Burton Technologies Inc. and Rotary Power International are forming a joint company to manufacture, market and license MRCC materials to a wide range of industries.

Effects of Combined Vigorous Interval Training Program and Diet on Body Composition, Physical Fitness, and Physical Self-Perceptions Among Obese Adolescent Boys and Girls.

Science.gov (United States)

Rey, Olivier; Vallier, Jean-Marc; Nicol, Caroline; Mercier, Charles-Symphorien; Maïano, Christophe

2017-02-01

This study examined the effects of a five-week intervention combining vigorous interval training (VIT) with diet among twenty-four obese adolescents. Fourteen girls and ten boys (aged 14-15) schooled in a pediatric rehabilitation center participated. The VIT intensity was targeted and remained above 80% of maximal heart rate (HR) and over six kilocalories per minute. Pre- and postintervention measures were body composition (BMI, weight, body fat percentage), physical self-perceptions (PSP), physical fitness (6-min walking distance and work) and its associated physiological responses (HR peak and blood lactate concentration). A series of two-way analyses of variance or covariance controlling for weight loss were used to examine the changes. Significant improvements were found in body composition, physical fitness and PSP (endurance, activity level, sport competence, global physical self-concept and appearance). In addition, boys presented higher levels of perceived strength and global physical self-concept than girls. Finally, there was a significant increase in perceived endurance, sport competence, and global physical self-concept in girls only. This five-week VIT program combined with diet represents an effective means for improving body composition, physical fitness, and PSP in obese adolescents, the effects on PSP being larger among girls.

Effect of Spinning Cycling Training on Body Composition in Women

Science.gov (United States)

Kaya, Fatih; Nar, Dilek; Erzeybek, Mustafa Said

2018-01-01

In this study the effects of a 6 week spinning cycling training on the body composition of women were investigated. Twelve sedentary women (32-47 years old) voluntarily participated in this study. The 6-week training program consisted of exercise sessions on 3 days per week. The intensity of the training program that was kept low in the beginning…

Improving body composition and strength in athletes through a 4-month combined martial arts and strength training program

Directory of Open Access Journals (Sweden)

Aleksandra Stachoń

2016-06-01

2Zakład Sportów Indywidualnych, Akademia Wychowania Fizycznego, ul. Paderewskiego 35, Wrocław       Corresponding author: Dr Aleksandra Jadwiga Stachoń, e-mail: aleksandra.stachon@awf.wroc.pl Departament of Physical Anthropology, University School of Physical Education in Wrocław, al. I.J. Paderewskiego 35, bud. P2, 51-612 Wrocław; Poland Phone: 71 347 33 44         Key words: resistance training, body build, body composition, combat sport.   Abstract Background and aim. Body composition is one of key components of health in both general and athletic populations. In martial arts great significance is attached to the development of mesomorphy and strength, which are crucial for performing offensive and defensive actions during fights. The study proposes to introduce progressive strength training programme - arranged primarily for beginners – in order to improve body composition of non-elite male martial arts competitors. The present study aims to evaluate the changes in body massiveness, body composition and strength in 31 martial arts practitioners from academic sports clubs after a combined martial arts and strength training programme. Material and methods. The 16-week intervention was based on a targeted progressive resistance training protocol developed by Stefaniak [1995]. The anthropometric, physical and motoric measurements were performed twice at four months interval. This programme includes training three times weekly with increased number of repetitions (19-24, number of sets (1-3 and increased loads (5%. Results. After the completion of the training program, significant increase for about 1.8 kgin body mass was observed. Body massiveness (BMI increased from 23.2 ± 1.8 kg/m2 to 23.9 ± 1.8 kg/m2. The analysis using Sheldon’s somatotypes revealed an increase of mesomorphy (from 5.5 to 5.7 and decrease of ectomorphy (from 2.5 to 2.4. The level of endomorphy became stable (2.1. The maximal circumferences of flexed arm, forearm, calf and

[Determination of deuterium concentration in foods and influence of water with modified isotopic composition on oxidation parameters and heavy hydrogen isotopes content in experimental animals].

Science.gov (United States)

Basov, A A; Bykov, I M; Baryshev, M G; Dzhimak, S S; Bykov, M I

2014-01-01

The article presents the results of the study of the deuterium (D) content in food products as well as the influence of deuterium depleted water (DDW) on the concentration of heavy hydrogen isotopes in the blood and lyophilized tissues of rats. The most significant difference in the content of D was found between potato and pork fat, which indexes the standard delta notation (δ) D in promille, related to the international standard SMOW (Standard Mean Ocean of Water) amounted to -83,2 per thousand and -250,7 per thousand, respectively (phydrogen atoms in the body. The data obtained in the experimental modeling of the diet of male Wistar rats in the age of 5-6 mo (weight 235 ± 16 g) using DDW (δD = -743,2 per thousand) instead of drinking water (δD = -37,0 per thousand) with identical mineral composition showed that after 2 weeks significant (p tissue") is due to different rates ofisotopic exchange reactions in plasma and tissues (liver, kidney, heart), which can be explained by entering into the composition of a modified diet of organic substrates with more than DDW concentration D, which are involved in the construction of cellular structures and eventually lead to a redistribution of D and change direction of D/H gradient "plasmacomposition, aimed at reducing the level of heavy non-radioactive atoms will allow the targeted nutritional correction of prooxidant-antioxidant status of the population in areas with adverse environmental conditions, stimulating by created isotopic D/H gradient cytoprotective mechanisms influencing the various components of nonspecific protection, including free radical oxidation processes. And then again, periodic assessment of the isotopic composition of nutrients will monitor the quality of food consumed by the population, and if

New methods for clinical pathways-Business Process Modeling Notation (BPMN) and Tangible Business Process Modeling (t.BPM).

Science.gov (United States)

Scheuerlein, Hubert; Rauchfuss, Falk; Dittmar, Yves; Molle, Rüdiger; Lehmann, Torsten; Pienkos, Nicole; Settmacher, Utz

2012-06-01

Clinical pathways (CP) are nowadays used in numerous institutions, but their real impact is still a matter of debate. The optimal design of a clinical pathway remains unclear and is mainly determined by the expectations of the individual institution. The purpose of the here described pilot project was the development of two CP (colon and rectum carcinoma) according to Business Process Modeling Notation (BPMN) and Tangible Business Process Modeling (t.BPM). BPMN is an established standard for business process modelling in industry and economy. It is, in the broadest sense, a computer programme which enables the description and a relatively easy graphical imaging of complex processes. t.BPM is a modular construction system of the BPMN symbols which enables the creation of an outline or raw model, e.g. by placing the symbols on a spread-out paper sheet. The thus created outline can then be transferred to the computer and further modified as required. CP for the treatment of colon and rectal cancer have been developed with support of an external IT coach. The pathway was developed in an interdisciplinary and interprofessional manner (55 man-days over 15 working days). During this time, necessary interviews with medical, nursing and administrative staffs were conducted as well. Both pathways were developed parallel. Subsequent analysis was focussed on feasibility, expenditure, clarity and suitability for daily clinical practice. The familiarization with BPMN was relatively quick and intuitive. The use of t.BPM enabled the pragmatic, effective and results-directed creation of outlines for the CP. The development of both CP was finished from the diagnostic evaluation to the adjuvant/neoadjuvant therapy and rehabilitation phase. The integration of checklists, guidelines and important medical or other documents is easily accomplished. A direct integration into the hospital computer system is currently not possible for technical reasons. BPMN and t.BPM are sufficiently

Program Evaluation - Automotive Lightweighting Materials Program Research and Development Projects Assessment of Benefits - Case Studies No. 2

Energy Technology Data Exchange (ETDEWEB)

Das, S.

2003-01-23

This report is the second of a series of studies to evaluate research and development (R&D) projects funded by the Automotive Lightweighting Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The objectives of the program evaluation are to assess short-run outputs and long-run outcomes that may be attributable to the ALM R&D projects. The ALM program focuses on the development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. Funded projects range from fundamental materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R&D projects were chosen for this evaluation: Design and Product Optimization for Cast Light Metals, Durability of Lightweight Composite Structures, and Rapid Tooling for Functional Prototyping of Metal Mold Processes. These projects were chosen because they have already been completed. The first project resulted in development of a comprehensive cast light metal property database, an automotive application design guide, computerized predictive models, process monitoring sensors, and quality assurance methods. The second project, the durability of lightweight composite structures, produced durability-based design criteria documents, predictive models for creep deformation, and minimum test requirements and suggested test methods for establishing durability properties and characteristics of random glass-fiber composites for automotive structural composites. The durability project supported Focal Project II, a validation activity that demonstrates ALM program goals and reduces the lead time for bringing new technology into the marketplace. Focal

Development of pressure containment and damage tolerance technology for composite fuselage structures in large transport aircraft

Science.gov (United States)

Smith, P. J.; Thomson, L. W.; Wilson, R. D.

1986-01-01

NASA sponsored composites research and development programs were set in place to develop the critical engineering technologies in large transport aircraft structures. This NASA-Boeing program focused on the critical issues of damage tolerance and pressure containment generic to the fuselage structure of large pressurized aircraft. Skin-stringer and honeycomb sandwich composite fuselage shell designs were evaluated to resolve these issues. Analyses were developed to model the structural response of the fuselage shell designs, and a development test program evaluated the selected design configurations to appropriate load conditions.

Multifunctional Metal/Polymer Composite Fiber for Space Applications, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In this Small Business Innovation Research Phase I Program, Syscom Technology, Inc. (STI) will fabricate a metallized multifunctional composite fiber from a...

Emerging Musical Literacy: Investigating Young Children's Music Cognition and Musical Problem-Solving through Invented Notations.

Science.gov (United States)

McCusker, Joan

A qualitative study was conducted in the winter of 2000 with children enrolled in a Clef Club, the fourth level of an early childhood music program sponsored by the Eastman School's Community Education Division (Rochester, NY). Eleven participants, ages 4.7 to 6.6, enrolled in 3 sections of the 10-week program taught by the researcher. Classroom…

Real-Time X-Ray Inspection of Composite Aircraft Structures

National Research Council Canada - National Science Library

Patricelli, F

1978-01-01

...) for detection of defects, damage, and repair verification. The program included inspection of composite aircraft structural samples in the laboratory and an on site demonstration of RTR at the Naval Air Rework Facility (NARF...

Phytoremediation of Composition-B Derived TNT and RDX in Herbaceous Plant-vegetated and Bare Lysimeters

Science.gov (United States)

2009-12-01

ER D C TR -0 9- 10 Strategic Environmental Research and Development Program Phytoremediation of Composition-B Derived TNT and RDX in...Program ERDC TR-09-10 December 2009 Phytoremediation of Composition-B Derived TNT and RDX in Herbaceous Plant-vegetated and Bare Lysimeters Elly P. H...for U.S. Army Corps of Engineers Washington, DC 20314-1000 ERDC TR-09-10 ii Abstract: This report describes a study in which phytoremediation of

NASA-UVa light aerospace alloy and structures technology program

Science.gov (United States)

Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Scully, John R.; Stoner, Glenn E.; Swanson, Robert E.; Thornton, Earl A.; Wawner, Franklin E., Jr.

1991-01-01

The general objective of the NASA-UVa Light Aerospace Alloy and Structures Technology Program was to conduct research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures. The following research areas were actively investigated: (1) mechanical and environmental degradation mechanisms in advanced light metals and composites; (2) aerospace materials science; (3) mechanics of materials and composites for aerospace structures; and (4) thermal gradient structures.

"ComPost": A Writing Program Newsletter and Its Rationale.

Science.gov (United States)

Hall, Dennis R.

1993-01-01

Discusses the development and rationale of "ComPost," a weekly newsletter of the Composition Program at the University of Louisville. Suggests that a vehicle like ComPost can promote the communications that contribute to accomplishing collegiality and genuine program consensus. (RS)

Fiber Finishes for Improving Galvanic Resistance of Imide-Based Composites

National Research Council Canada - National Science Library

Allred, R. E

1998-01-01

The objective of this program is the development and demonstration of galvanic corrosion resistant carbon/ BMI composites through the use of reactive finishes to form coatings that isolate the carbon...

Troll, a Language for specifying Dice-rolls

DEFF Research Database (Denmark)

Mogensen, Torben Ægidius

2009-01-01

Dice are used in many games, and often in fairly complex ways that make it difficult to unambiguously describe the dice-roll mechanism in plain language. Many role-playing games, such as Dungeons & Dragons, use a formalised notation for some instances of dice-rolls. This notation, once explained...... natural language to describe rolls. Even Dungeons & Dragons use formal notation only for some of the dice-roll methods used in the game. Hence, a more complete notation is in this paper proposed, and a tool for pseudo-random rolls and (nearly) exact probability calculations is described. The notation...... is called "Troll", combining the initial of the Danish word for dice ("terninger") with the English word "roll". It is a development of the language Roll described in an earlier paper. The present paper describes the most important features of Troll and its implementation....

User's manual for the Composite HTGR Analysis Program (CHAP-1)

International Nuclear Information System (INIS)

Gilbert, J.S.; Secker, P.A. Jr.; Vigil, J.C.; Wecksung, M.J.; Willcutt, G.J.E. Jr.

1977-03-01

CHAP-1 is the first release version of an HTGR overall plant simulation program with both steady-state and transient solution capabilities. It consists of a model-independent systems analysis program and a collection of linked modules, each representing one or more components of the HTGR plant. Detailed instructions on the operation of the code and detailed descriptions of the HTGR model are provided. Information is also provided to allow the user to easily incorporate additional component modules, to modify or replace existing modules, or to incorporate a completely new simulation model into the CHAP systems analysis framework

Polymer/Layered Silicate Nano composites

International Nuclear Information System (INIS)

Bakhit, M.E.E.H.

2012-01-01

Polymer–clay nano composites have attracted the attention of many researchers and experimental results are presented in a large number of recent papers and patents because of the outstanding mechanical properties and low gas permeabilities that are achieved in many cases. Polymer-clay nano composites are a new class of mineral-field polymer that contain relatively small amounts (<10%) of nanometer-sized clay particles. Polymer/clay nano composites have their origin in the pioneering research conducted at Toyota Central Research Laboratories and the first historical record goes back to 1987. The matrix was nylon-6 and the filler MMT. Because of its many advantages such as high mechanical properties, good gas barrier, flame retardation, etc. polymer/clay nano composites have been intensely investigated and is currently the subject of many research programs. Nano composite materials are commercially important and several types of products with different shapes and applications including food packaging films and containers, engine parts, dental materials, etc. are now available in markets. A number of synthesis routes have been developed in the recent years to prepare these materials, which include intercalation of polymers or prepolymers from solution, in-situ polymerization, melt intercalation etc. In this study, new nano composite materials were produced from the components of rubber (Nbr, SBR and EPDM) as the polymeric matrix and organically modified quaternary alkylammonium montmorillonite in different contents (3, 5, 7, and 10 phr) as the filler by using an extruder then, the rubber nano composite sheets were irradiated at a dose of 0, 50, 75, 100 and 150 KGy using Electron beam Irradiation technique as a crosslinking agent. These new materials can be characterized by using various analytical techniques including X-ray diffractometer XRD, Thermogravimetric analyzer TGA, scanning electron microscope (SEM), transmission electron microscope (TEM),Fourier transform

Protective Skins for Composite Airliners

Science.gov (United States)

Johnson, Vicki S.; Boone, Richard L.; Jones, Shannon; Pendse, Vandana; Hayward, Greg

2014-01-01

Traditional composite aircraft structures are designed for load bearing and then overdesigned for impact damage and hot humid environments. Seeking revolutionary improvement in the performance and weight of composite structures, Cessna Aircraft Company, with sponsorship from the NASA Fundamental Aeronautics Program/Subsonic Fixed Wing Project, has developed and tested a protective skin concept which would allow the primary composite structure to carry only load and would meet the impact, hot and humid, and other requirements through protective skins. A key requirement for the protective skins is to make any impact damage requiring repair visible. Testing from the first generation of skins helped identify the most promising materials which were used in a second generation of test articles. This report summarizes lessons learned from the first generation of protective skins, the design and construction of the second-generation test articles, test results from the second generation for impact, electromagnetic effects, aesthetics and smoothing, thermal, and acoustic (for the first time), and an assessment of the feasibility of the protective skin concept.

Inelastic damage using continuum damage mechanics in composite plate reinforced by unidirectional fibers

Directory of Open Access Journals (Sweden)

Žmindák Milan

2018-01-01

Full Text Available It is well that a finite element method is very popular simulation method to predict the physical behavior of systems and structures. In the last years an increase of interest in a new type of numerical methods known as meshless methods was observed. The paper deals with application of radial basis functions on modelling of inelastic damage using continuum damage mechanics of layered plate composite structures reinforced with long unidirectional fibers. For numerical simulations of elastic-plastic damage of layered composite plates own computational programs were implemented in MATLAB programming language. We will use the Newton-Raphson method to solve nonlinear systems of equations. Evaluation damage during plasticity has been solved using return mapping algorithm. The results of elastic-plastic damage analysis of composite plate with unsymmetrical laminate stacking sequence are presented.

Determining Composite Validity Coefficients for Army Jobs and Job Families

National Research Council Canada - National Science Library

Zeidner, Joseph

2002-01-01

...) is to compute composite validity coefficients. using criterion data derived from the 1987 - 1989 Skill Qualifications Test program, for the 7-test ASVAB for 150, 17, and 9 job family structures...

Free material stiffness design of laminated composite structures using commercial finite element analysis codes

DEFF Research Database (Denmark)

Henrichsen, Søren Randrup; Lindgaard, Esben; Lund, Erik

2015-01-01

In this work optimum stiffness design of laminated composite structures is performed using the commercially available programs ANSYS and MATLAB. Within these programs a Free Material Optimization algorithm is implemented based on an optimality condition and a heuristic update scheme. The heuristic...... update scheme is needed because commercially available finite element analysis software is used. When using a commercial finite element analysis code it is not straight forward to implement a computationally efficient gradient based optimization algorithm. Examples considered in this work are a clamped......, where full access to the finite element analysis core is granted. This comparison displays the possibility of using commercially available programs for stiffness design of laminated composite structures....

An introduction to compositional methods for concurrency and their application to real-time

NARCIS (Netherlands)

Hooman, J.J.M.; Roever, de W.P.

1992-01-01

Formal methods to specify and verify concurrent programs with synchronous message passing are discussed. We stress the development towards compositional methods, i.e. methods in which the specification of a compound program can be inferred from specifications of its constituents without reference to

Fatigue of hybrid glass/carbon composites: 3D computational studies

DEFF Research Database (Denmark)

Dai, Gaoming; Mishnaevsky, Leon

2014-01-01

3D computational simulations of fatigue of hybrid carbon/glass fiber reinforced composites is carried out using X-FEM and multifiber unit cell models. A new software code for the automatic generation of unit cell multifiber models of composites with randomly misaligned fibers of various properties...... and geometrical parameters is developed. With the use of this program code and the X-FEM method, systematic investigations of the effect of microstructure of hybrid composites (fraction of carbon versus glass fibers, misalignment, and interface strength) and the loading conditions (tensile versus compression...... cyclic loading effects) on fatigue behavior of the materials are carried out. It was demonstrated that the higher fraction of carbon fibers in hybrid composites is beneficial for the fatigue lifetime of the composites under tension-tension cyclic loading, but might have negative effect on the lifetime...

A Study of the Utilization of Advanced Composites in Fuselage Structures of Commercial Aircraft

Science.gov (United States)

Watts, D. J.; Sumida, P. T.; Bunin, B. L.; Janicki, G. S.; Walker, J. V.; Fox, B. R.

1985-01-01

A study was conducted to define the technology and data needed to support the introduction of advanced composites in the future production of fuselage structure in large transport aircraft. Fuselage structures of six candidate airplanes were evaluated for the baseline component. The MD-100 was selected on the basis of its representation of 1990s fuselage structure, an available data base, its impact on the schedule and cost of the development program, and its availability and suitability for flight service evaluation. Acceptance criteria were defined, technology issues were identified, and a composite fuselage technology development plan, including full-scale tests, was identified. The plan was based on composite materials to be available in the mid to late 1980s. Program resources required to develop composite fuselage technology are estimated at a rough order of magnitude to be 877 man-years exclusive of the bird strike and impact dynamic test components. A conceptual composite fuselage was designed, retaining the basic MD-100 structural arrangement for doors, windows, wing, wheel wells, cockpit enclosure, major bulkheads, etc., resulting in a 32 percent weight savings.

Application of System and Integration Readiness Levels to Department of Defense Research and Development

Science.gov (United States)

2016-07-01

prompting folding foot-pegs. The human-motorcycle interface maturity followed the technical maturity at the expense of safety. Early airplanes were...this paper shows matrix notation in both reduced tensor notation and matrix notation as a convenience for a multidisciplinary audience. SRLj, [SRL...index for managing the acquisition of defense systems. Paper presented at National Defense Industrial Association 13th Annual Systems Engineering

Proceedings of the SERI Biomass Program Principal Investigators' Review Meeting: Aquatic Species Program Reports; 23-25 June 1982, Washington, DC

Energy Technology Data Exchange (ETDEWEB)

1982-12-01

The Aquatic Species Program (ASP) is concerned with how plant biomass that naturally occurs in wetland or submerged areas is utilized. Processes are being developed in this program to make use of those aquatic species, capitalizing on their inherent capacity for rapid growth as well as on their extraordinary chemical compositions.

Evaluation of the impact of a nutritional program for undernourished children in Brazil

NARCIS (Netherlands)

Santos, Iná S; Gigante, Denise P; Coitinho, Denise C; Haisma, Hinke; Valle, Neiva C J; Valente, Gicele

2005-01-01

To assess the effectiveness on child growth and body composition of a supplementary feeding program (Milk Supplement Program), a prospective, controlled study was conducted in Northeast Brazil. When entering the Program, children from 10 municipalities with the highest coverage rates in the Program

Clojure for machine learning

CERN Document Server

Wali, Akhil

2014-01-01

A book that brings out the strengths of Clojure programming that have to facilitate machine learning. Each topic is described in substantial detail, and examples and libraries in Clojure are also demonstrated.This book is intended for Clojure developers who want to explore the area of machine learning. Basic understanding of the Clojure programming language is required, but thorough acquaintance with the standard Clojure library or any libraries are not required. Familiarity with theoretical concepts and notation of mathematics and statistics would be an added advantage.

VEST: An Aspect-Based Composition Tool for Real-Time Systems

Science.gov (United States)

2003-01-01

VEST: An Aspect-Based Composition Tool for Real - Time Systems * John A. Stankovic Ruiqing Zhu Ram Poornalingam Chenyang Lu Zhendong Yu Marty Humphrey...Composition Tool for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...it is obvious that designers of embedded real - time systems face many difficult problems. By working through various product scenarios with avionics

Development and validation of bonded composite doubler repairs for commercial aircraft.

Energy Technology Data Exchange (ETDEWEB)

Roach, Dennis Patrick; Rackow, Kirk A.

2007-07-01

A typical aircraft can experience over 2,000 fatigue cycles (cabin pressurizations) and even greater flight hours in a single year. An unavoidable by-product of aircraft use is that crack, impact, and corrosion flaws develop throughout the aircraft's skin and substructure elements. Economic barriers to the purchase of new aircraft have placed even greater demands on efficient and safe repair methods. The use of bonded composite doublers offers the airframe manufacturers and aircraft maintenance facilities a cost effective method to safely extend the lives of their aircraft. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is now possible to bond a single Boron-Epoxy composite doubler to the damaged structure. The FAA's Airworthiness Assurance Center at Sandia National Labs (AANC), Boeing, and Federal Express completed a pilot program to validate and introduce composite doubler repair technology to the U.S. commercial aircraft industry. This project focused on repair of DC-10 fuselage structure and its primary goal was to demonstrate routine use of this repair technology using niche applications that streamline the design-to-installation process. As composite doubler repairs gradually appear in the commercial aircraft arena, successful flight operation data is being accumulated. These commercial aircraft repairs are not only demonstrating the engineering and economic advantages of composite doubler technology but they are also establishing the ability of commercial maintenance depots to safely adopt this repair technique. This report presents the array of engineering activities that were completed in order to make this technology available for widespread commercial aircraft use. Focused laboratory testing was conducted to compliment the field data and to address specific issues regarding damage tolerance and flaw growth in composite doubler repairs. Fatigue and strength tests were performed on a simulated wing

Processing and characterization of ceramic superconductor/polymer composites

International Nuclear Information System (INIS)

Kander, R.G.; Namboodri, S.L.

1993-01-01

One way to more easily process a brittle high-temperature ceramic superconductor into a useful structure is to combine it with a polymer to form a composite material. Processing of polymer-based composites into complex shapes is well established and relatively easy when compared with traditional ceramic processing unit operations. In addition, incorporating a ceramic superconductor into a polymer matrix can improve mechanical performance as compared with a monolithic ceramic. Finally, because ceramic superconductors are susceptible to attack by moisture, a polymer-based composite structure can also provide protection from deleterious environmental effects. This paper focuses on the processing and subsequent characterization of ceramic superconductor/polymer composites designed primarily for electromagnetic shielding and diamagnetic applications. YBa 2 Cu 3 O 7-x [YBCO] ceramic superconductor is combined with poly(methyl methacrylate) [PMMA] to form novel composite structures. Composite structures have been molded with both a discontinuous superconducting phase (i.e., ceramic particulate reinforced polymers) and with a continuous superconducting phase (i.e., polymer infiltrated porous ceramics). Characterization of these composite structures includes the determination of diamagnetic strength, electromagnetic shielding effectiveness, mechanical performance, and environmental resistance. The goal of this program is to produce a composite structure with increased mechanical integrity and environmental resistance at liquid nitrogen temperatures without compromising the electromagnetic shielding and diamagnetic properties of the superconducting phase. Composites structures of this type are potentially useful in numerous magnetic applications including electromagnetic shielding, magnetic sensors, energy storage, magnetic levitation, and motor windings

Ceramic composites for near term reactor application - HTR2008-58050

International Nuclear Information System (INIS)

Snead, L. L.; Katoh, Y.; Windes, W. E.; Shinavski, R. J.; Burchell, T. D.

2008-01-01

Currently, two composites types are being developed for in-core application: carbon fiber carbon composite (CFC), and silicon carbide fiber composite (SiC/SiC.) Irradiation effects studies have been carried out over the past few decades yielding radiation-tolerant CFC's and a composite of SiC/SiC with no apparent degradation in mechanical properties to very high neutron exposure. While CFC's can be engineered with significantly higher thermal conductivity, and a slight advantage in manufacturability than SiC/SiC, they do have a neutron irradiation-limited lifetime. The SiC composite, while possessing lower thermal conductivity (especially following irradiation), appears to have mechanical properties insensitive to irradiation. Both materials are currently being produced to sizes much larger than that considered for nuclear application. In addition to materials aspects, results of programs focusing on practical aspects of deploying composites for near-term reactors will be discussed. In particular, significant progress has been made in the fabrication, testing, and qualification of composite gas-cooled reactor control rod sheaths and the ASTM standardization required for eventual qualification. (authors)

Neutron tolerance of advanced SiC-fiber/CVI-SiC composites

International Nuclear Information System (INIS)

Katoh, Y.; Kohyama, A.; Snead, L.L.; Hinoki, T.; Hasegawa, A.

2003-01-01

Fusion blankets employing a silicon carbide (SiC) fiber-reinforced SiC matrix composite (SiC/SiC composite) as the structural material provide attractive features represented by high cycle efficiency and extremely low induced radioactivity. Recent advancement in processing and utilization techniques and application studies in ceramic gas turbine and advanced transportation systems, SiC/SiC composites are steadily getting matured as industrial materials. Reference SiC/SiC composites for fusion structural applications have been produced by a forced-flow chemical vapor infiltration (FCVI) method using conventional and advanced near-stoichiometric SiC fibers and extensively evaluated primarily in Japan-US collaborative JUPITER program. In this work, effect of neutron irradiation at elevated temperatures on mechanical property of these composites is characterized. Unlike in conventional SiC/SiC composites, practically no property degradation was identified in advanced composites with a thin carbon interphase by a neutron fluence level of approximately 8dpa at 800C. (author)

The stress analysis method for three-dimensional composite materials

Science.gov (United States)

Nagai, Kanehiro; Yokoyama, Atsushi; Maekawa, Zen'ichiro; Hamada, Hiroyuki

1994-05-01

This study proposes a stress analysis method for three-dimensionally fiber reinforced composite materials. In this method, the rule-of mixture for composites is successfully applied to 3-D space in which material properties would change 3-dimensionally. The fundamental formulas for Young's modulus, shear modulus, and Poisson's ratio are derived. Also, we discuss a strength estimation and an optimum material design technique for 3-D composite materials. The analysis is executed for a triaxial orthogonally woven fabric, and their results are compared to the experimental data in order to verify the accuracy of this method. The present methodology can be easily understood with basic material mechanics and elementary mathematics, so it enables us to write a computer program of this theory without difficulty. Furthermore, this method can be applied to various types of 3-D composites because of its general-purpose characteristics.

On the linear programming bound for linear Lee codes.

Science.gov (United States)

Astola, Helena; Tabus, Ioan

2016-01-01

Based on an invariance-type property of the Lee-compositions of a linear Lee code, additional equality constraints can be introduced to the linear programming problem of linear Lee codes. In this paper, we formulate this property in terms of an action of the multiplicative group of the field [Formula: see text] on the set of Lee-compositions. We show some useful properties of certain sums of Lee-numbers, which are the eigenvalues of the Lee association scheme, appearing in the linear programming problem of linear Lee codes. Using the additional equality constraints, we formulate the linear programming problem of linear Lee codes in a very compact form, leading to a fast execution, which allows to efficiently compute the bounds for large parameter values of the linear codes.

Direct 4D printing via active composite materials

Science.gov (United States)

Ding, Zhen; Yuan, Chao; Peng, Xirui; Wang, Tiejun; Qi, H. Jerry; Dunn, Martin L.

2017-01-01

We describe an approach to print composite polymers in high-resolution three-dimensional (3D) architectures that can be rapidly transformed to a new permanent configuration directly by heating. The permanent shape of a component results from the programmed time evolution of the printed shape upon heating via the design of the architecture and process parameters of a composite consisting of a glassy shape memory polymer and an elastomer that is programmed with a built-in compressive strain during photopolymerization. Upon heating, the shape memory polymer softens, releases the constraint on the strained elastomer, and allows the object to transform into a new permanent shape, which can then be reprogrammed into multiple subsequent shapes. Our key advance, the markedly simplified creation of high-resolution complex 3D reprogrammable structures, promises to enable myriad applications across domains, including medical technology, aerospace, and consumer products, and even suggests a new paradigm in product design, where components are simultaneously designed to inhabit multiple configurations during service. PMID:28439560

Direct 4D printing via active composite materials.

Science.gov (United States)

Ding, Zhen; Yuan, Chao; Peng, Xirui; Wang, Tiejun; Qi, H Jerry; Dunn, Martin L

2017-04-01

We describe an approach to print composite polymers in high-resolution three-dimensional (3D) architectures that can be rapidly transformed to a new permanent configuration directly by heating. The permanent shape of a component results from the programmed time evolution of the printed shape upon heating via the design of the architecture and process parameters of a composite consisting of a glassy shape memory polymer and an elastomer that is programmed with a built-in compressive strain during photopolymerization. Upon heating, the shape memory polymer softens, releases the constraint on the strained elastomer, and allows the object to transform into a new permanent shape, which can then be reprogrammed into multiple subsequent shapes. Our key advance, the markedly simplified creation of high-resolution complex 3D reprogrammable structures, promises to enable myriad applications across domains, including medical technology, aerospace, and consumer products, and even suggests a new paradigm in product design, where components are simultaneously designed to inhabit multiple configurations during service.

Comparison of Requirements for Composite Structures for Aircraft and Space Applications

Science.gov (United States)

Raju, Ivatury S.; Elliot, Kenny B.; Hampton, Roy W.; Knight, Norman F., Jr.; Aggarwal, Pravin; Engelstad, Stephen P.; Chang, James B.

2010-01-01

In this report, the aircraft and space vehicle requirements for composite structures are compared. It is a valuable exercise to study composite structural design approaches used in the airframe industry and to adopt methodology that is applicable for space vehicles. The missions, environments, analysis methods, analysis validation approaches, testing programs, build quantities, inspection, and maintenance procedures used by the airframe industry, in general, are not transferable to spaceflight hardware. Therefore, while the application of composite design approaches from aircraft and other industries is appealing, many aspects cannot be directly utilized. Nevertheless, experiences and research for composite aircraft structures may be of use in unexpected arenas as space exploration technology develops, and so continued technology exchanges are encouraged.

BPMN, Toolsets, and Methodology: A Case Study of Business Process Management in Higher Education

Science.gov (United States)

Barn, Balbir S.; Oussena, Samia

This chapter describes ongoing action research which is exploring the use of BPMN and a specific toolset - Intalio Designer to capture the “as is” essential process model of part of an overarching large business process within higher education. The chapter contends that understanding the efficacy of the BPMN notation and the notational elements to use is not enough. Instead, the effectiveness of a notation is determined by the notation, the toolset that is being used, and methodological consideration. The chapter presents some of the challenges that are faced in attempting to develop computation independent models in BPMN using toolsets such as Intalio Designer™.

Critical joints in large composite primary aircraft structures. Volume 2: Technology demonstration test report

Science.gov (United States)

Bunin, Bruce L.

1985-01-01

A program was conducted to develop the technology for critical structural joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of four large composite multirow bolted joint tests are presented. The tests were conducted to demonstrate the technology for critical joints in highly loaded composite structure and to verify the analytical methods that were developed throughout the program. The test consisted of a wing skin-stringer transition specimen representing a stringer runout and skin splice on the wing lower surface at the side of the fuselage attachment. All tests were static tension tests. The composite material was Toray T-300 fiber with Ciba-Geigy 914 resin in 10 mil tape form. The splice members were metallic, using combinations of aluminum and titanium. Discussions are given of the test article, instrumentation, test setup, test procedures, and test results for each of the four specimens. Some of the analytical predictions are also included.

Flight service evaluation of composite helicopter components

Science.gov (United States)

Mardoian, George H.; Ezzo, Maureen B.

1994-01-01

This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

Stochastic-Strength-Based Damage Simulation Tool for Ceramic Matrix and Polymer Matrix Composite Structures

Science.gov (United States)

Nemeth, Noel N.; Bednarcyk, Brett A.; Pineda, Evan J.; Walton, Owen J.; Arnold, Steven M.

2016-01-01

Stochastic-based, discrete-event progressive damage simulations of ceramic-matrix composite and polymer matrix composite material structures have been enabled through the development of a unique multiscale modeling tool. This effort involves coupling three independently developed software programs: (1) the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC), (2) the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program (CARES/ Life), and (3) the Abaqus finite element analysis (FEA) program. MAC/GMC contributes multiscale modeling capabilities and micromechanics relations to determine stresses and deformations at the microscale of the composite material repeating unit cell (RUC). CARES/Life contributes statistical multiaxial failure criteria that can be applied to the individual brittle-material constituents of the RUC. Abaqus is used at the global scale to model the overall composite structure. An Abaqus user-defined material (UMAT) interface, referred to here as "FEAMAC/CARES," was developed that enables MAC/GMC and CARES/Life to operate seamlessly with the Abaqus FEA code. For each FEAMAC/CARES simulation trial, the stochastic nature of brittle material strength results in random, discrete damage events, which incrementally progress and lead to ultimate structural failure. This report describes the FEAMAC/CARES methodology and discusses examples that illustrate the performance of the tool. A comprehensive example problem, simulating the progressive damage of laminated ceramic matrix composites under various off-axis loading conditions and including a double notched tensile specimen geometry, is described in a separate report.

Thermoviscoelastic characterization and prediction of Kevlar/epoxy composite laminates

Science.gov (United States)

Gramoll, K. C.; Dillard, D. A.; Brinson, H. F.

1990-01-01

The thermoviscoelastic characterization of Kevlar 49/Fiberite 7714A epoxy composite lamina and the development of a numerical procedure to predict the viscoelastic response of any general laminate constructed from the same material were studied. The four orthotropic material properties, S sub 11, S sub 12, S sub 22, and S sub 66, were characterized by 20 minute static creep tests on unidirectional (0) sub 8, (10) sub 8, and (90) sub 16 lamina specimens. The Time-Temperature Superposition-Principle (TTSP) was used successfully to accelerate the characterization process. A nonlinear constitutive model was developed to describe the stress dependent viscoelastic response for each of the material properties. A numerical procedure to predict long term laminate properties from lamina properties (obtained experimentally) was developed. Numerical instabilities and time constraints associated with viscoelastic numerical techniques were discussed and solved. The numerical procedure was incorporated into a user friendly microcomputer program called Viscoelastic Composite Analysis Program (VCAP), which is available for IBM PC type computers. The program was designed for ease of use. The final phase involved testing actual laminates constructed from the characterized material, Kevlar/epoxy, at various temperatures and load level for 4 to 5 weeks. These results were compared with the VCAP program predictions to verify the testing procedure and to check the numerical procedure used in the program. The actual tests and predictions agreed for all test cases which included 1, 2, 3, and 4 fiber direction laminates.

Design of an Advanced Wood Composite Rotor and Development of Wood Composite Blade Technology

Science.gov (United States)

Stroebel, Thomas; Dechow, Curtis; Zuteck, Michael

1984-01-01

In support of a program to advance wood composite wind turbine blade technology, a design was completed for a prototype, 90-foot diameter, two-bladed, one-piece rotor, with all wood/epoxy composite structure. The rotor was sized for compatibility with a generator having a maximum power rating of 4000 kilowatts. Innovative features of the rotor include: a teetering hub to minimize the effects of gust loads, untwisted blades to promote rotor power control through stall, joining of blades to the hub structure via an adhesive bonded structural joint, and a blade structural design which was simplified relative to earlier efforts. The prototype rotor was designed to allow flexibility for configuring the rotor upwind or downwind of the tower, for evaluating various types of teeter dampers and/or elastomeric stops, and with variable delta-three angle settings of the teeter shaft axis. The prototype rotor was also designed with provisions for installing pressure tap and angle of attack instrumentation in one blade. A production version rotor cost analysis was conducted. Included in the program were efforts directed at developing advanced load take-off stud designs for subsequent evaluation testing by NASA, development of aerodynamic tip brake concepts, exploratory testing of a wood/epoxy/graphite concept, and compression testing of wood/epoxy laminate, with scarf-jointed plies.

Changes in weight loss, body composition and cardiovascular disease risk after altering macronutrient distributions during a regular exercise program in obese women

Directory of Open Access Journals (Sweden)

Roberts Mike D

2010-11-01

Full Text Available Abstract Background This study's purpose investigated the impact of different macronutrient distributions and varying caloric intakes along with regular exercise for metabolic and physiological changes related to weight loss. Methods One hundred forty-one sedentary, obese women (38.7 ± 8.0 yrs, 163.3 ± 6.9 cm, 93.2 ± 16.5 kg, 35.0 ± 6.2 kg•m-2, 44.8 ± 4.2% fat were randomized to either no diet + no exercise control group (CON a no diet + exercise control (ND, or one of four diet + exercise groups (high-energy diet [HED], very low carbohydrate, high protein diet [VLCHP], low carbohydrate, moderate protein diet [LCMP] and high carbohydrate, low protein [HCLP] in addition to beginning a 3x•week-1 supervised resistance training program. After 0, 1, 10 and 14 weeks, all participants completed testing sessions which included anthropometric, body composition, energy expenditure, fasting blood samples, aerobic and muscular fitness assessments. Data were analyzed using repeated measures ANOVA with an alpha of 0.05 with LSD post-hoc analysis when appropriate. Results All dieting groups exhibited adequate compliance to their prescribed diet regimen as energy and macronutrient amounts and distributions were close to prescribed amounts. Those groups that followed a diet and exercise program reported significantly greater anthropometric (waist circumference and body mass and body composition via DXA (fat mass and % fat changes. Caloric restriction initially reduced energy expenditure, but successfully returned to baseline values after 10 weeks of dieting and exercising. Significant fitness improvements (aerobic capacity and maximal strength occurred in all exercising groups. No significant changes occurred in lipid panel constituents, but serum insulin and HOMA-IR values decreased in the VLCHP group. Significant reductions in serum leptin occurred in all caloric restriction + exercise groups after 14 weeks, which were unchanged in other non

Carbon Fiber Composite Materials for Automotive Applications

Energy Technology Data Exchange (ETDEWEB)

Norris, Jr., Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mainka, Hendrik [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-06-01

Volkswagen (VW) is internationally recognized for quantity and quality of world-wide vehicle production and the Oak Ridge National Laboratory (ORNL) is internationally recognized in materials research and development. With automotive production ramping up in the recently constructed VW Group of America facility in Chattanooga, Tennessee, ORNL and VW initiated discussions in 2012 concerning opportunities for collaboration around ORNL’s carbon fiber and composites programs. ORNL is conducting an internationally recognized program to develop and implement lower cost carbon fibers and composites for automotive and other “energy missions” for the US Department of Energy. Significant effort is ongoing in selecting, developing, and evaluating alternative precursors, developing and demonstrating advanced conversion techniques, and developing and tailoring surface treatment, sizings, and formatting fiber for specific composite matrices and end-use applications. ORNL already had North America’s most comprehensive suite of tools for carbon fiber research and development and established a semiproduction demonstration line referred to as the Carbon Fiber Technology Facility (CFTF) to facilitate implementation of low cost carbon fiber (LCCF) approaches in early 2013. ORNL and VW agreed to collaborate in a formal Cooperative Research and Development Agreement (NFE-12-03992) specifically focused on evaluating applicability of low cost carbon fiber products for potential vehicle components. The goal of the work outlined in this report was to develop and qualify uses for carbon fiber-reinforced structures in connection with civilian ground transportation. Significant progress was achieved in evaluating and understanding lignin-based precursor materials; however, availability of carbon fiber converted from lignin precursor combined with logistical issues associated with the Visa limitations for the VW participant resulted in significantly shortening of the collaboration

LH2 Tank Composite Coverplate Development and Flight Qualification for the X-33

Science.gov (United States)

Wright, Richard J.; Roule, Gerard M.

2000-01-01

In this paper, the development history for the first cryogenic pressurized fuel tank coverplates is presented along with a synopsis of the development strategy and technologies which led to success on this program. Coverplates are the large access panels used to access launch vehicle fuel tanks. These structures incorporate all of the requirements for a pressure vessel as well as the added requirement to mount all of the miscellaneous access points required for a fuel management system. The first composite coverplates to meet the requirements for flight qualification were developed on the X-33 program. The X-33 composite coverplates went from an open requirement to successful finished flight hardware with multiple unique configurations, complete with verification testing, in less than eighteen months. Besides the rapid development schedule, these components introduced several new technologies previously unseen in cryogenic composites including solutions to cryogenic shrinkage, self-supporting sealing surfaces, and highly loaded composite bosses with precision sealing interfaces. These components were proven to seal liquid hydrogen at cryogenic temperatures under maximum loading and pressure conditions.

Ceramic Composite Intermediate Temperature Stress-Rupture Properties Improved Significantly

Science.gov (United States)

Morscher, Gregory N.; Hurst, Janet B.

2002-01-01

Silicon carbide (SiC) composites are considered to be potential materials for future aircraft engine parts such as combustor liners. It is envisioned that on the hot side (inner surface) of the combustor liner, composites will have to withstand temperatures in excess of 1200 C for thousands of hours in oxidizing environments. This is a severe condition; however, an equally severe, if not more detrimental, condition exists on the cold side (outer surface) of the combustor liner. Here, the temperatures are expected to be on the order of 800 to 1000 C under high tensile stress because of thermal gradients and attachment of the combustor liner to the engine frame (the hot side will be under compressive stress, a less severe stress-state for ceramics). Since these composites are not oxides, they oxidize. The worst form of oxidation for strength reduction occurs at these intermediate temperatures, where the boron nitride (BN) interphase oxidizes first, which causes the formation of a glass layer that strongly bonds the fibers to the matrix. When the fibers strongly bond to the matrix or to one another, the composite loses toughness and strength and becomes brittle. To increase the intermediate temperature stress-rupture properties, researchers must modify the BN interphase. With the support of the Ultra-Efficient Engine Technology (UEET) Program, significant improvements were made as state-of-the-art SiC/SiC composites were developed during the Enabling Propulsion Materials (EPM) program. Three approaches were found to improve the intermediate-temperature stress-rupture properties: fiber-spreading, high-temperature silicon- (Si) doped boron nitride (BN), and outside-debonding BN.

A Program in Social Sciences for Engineering Students.

Science.gov (United States)

Kumar, K. S. P.

A set of programs in liberal education designed to enhance the social dimensions of engineering education is described. This program requires a minimum of 36 quarter credits in the broad categories of English Composition (8-10 credits), Man and Society (12-15 credits), Artistic Expression (8-10 credits), and the balance from any of the above…

Effect of 4 weeks of Pilates on the body composition of young girls

NARCIS (Netherlands)

Jago, R; Jonker, ML; Missaghian, M; Baranowski, T

Background. There is a need to find ways to increase the physical activity levels and improve the body composition and blood pressure of girls. Methods. Thirty 11-year-old girls were recruited from two after school programs in Houston Texas in Spring 2005. Participants from one program (16) were

Composites

International Nuclear Information System (INIS)

Kasen, M.B.

1983-01-01

This chapter discusses the roles of composite laminates and aggregates in cryogenic technology. Filamentary-reinforced composites are emphasized because they are the most widely used composite materials. Topics considered include composite systems and terminology, design and fabrication, composite failure, high-pressure reinforced plastic laminates, low-pressure reinforced plastics, reinforced metals, selectively reinforced structures, the effect of cryogenic temperatures, woven-fabric and random-mat composites, uniaxial fiber-reinforced composites, composite joints in cryogenic structures, joining techniques at room temperature, radiation effects, testing laminates at cryogenic temperatures, static and cyclic tensile testing, static and cyclic compression testing, interlaminar shear testing, secondary property tests, and concrete aggregates. It is suggested that cryogenic composite technology would benefit from the development of a fracture mechanics model for predicting the fitness-for-purpose of polymer-matrix composite structures

Rethinking literate programming in statistics

DEFF Research Database (Denmark)

Haghish, E. F.

2016-01-01

for compiling the code and preparing the documentation. While this workflow might be satisfactory for software documentation, it is not ideal for writing statistical analysis reports. Instead, these processes should run in parallel. In this article, I introduce the weaver package, which examines this idea...... by creating a new log system in HTML or LATEX that can be used simultaneously with the Stata log system. The new log system provides many features that the Stata log system lacks; for example, it can render mathematical notations, insert figures, create publication-ready dynamic tables, and style text......, and it includes a built-in syntax highlighter. The weaver package also produces dynamic PDF documents by converting the HTML log to PDF or by typesetting the LATEX log and thus provides a real-time preview of the document without recompiling the code. I also discuss potential applications of the weaver package....

Continuous fiber ceramic composite. Phase I final report, April 1992--April 1993

Energy Technology Data Exchange (ETDEWEB)

Goettler, R.W.

1995-04-01

Babcock and Wilcox assembled a team to develop the Continuous Fiber Ceramic Composite (CFCC) processing technology, identify the industrial applications, generate design and life prediction software, and to begin the necessary steps leading to full commercialization of CFCC components. Following is a summary of Phase I activities on this program. B&W has selected an oxide-oxide composite system for development and optimization in this program. This selection was based on the results of exposure tests in combustion environments typical of the boiler and heat exchanger applications. Aluminum oxide fiber is the selected reinforcement, and both aluminum oxide and zirconium oxide matrices were selected, based on their superior resistance to chemical attack in hostile industrial service.

Predictions of the product compositions for combustion or gasification of biomass and others hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Rocha, Hendrick Maxil Zarate; Itai, Yuu; Nogueira, Manoel Fernandes Martins; Moraes, Sinfronio Brito; Rocha, Brigida Ramati Pereira da [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Faculdade de Engenharia Mecanica]. E-mails: hendrick@ufpa.br; yuuitai@ufpa.br; mfmn@ufpa.br; sbrito@ufpa.br; brigida@ufpa.br

2008-07-01

Processes involving combustion and gasification are object of study of many researchers. To simulate these processes in a detailed way, it is necessary to solve equations for chemical kinetics whose resolution many times is difficult due lack of information in the literature a simples way to bypass tis problem is due the chemical equilibrium. Prediction of the flu gases composition through chemical equilibrium is an important step in the mathematical modelling for gasification and combustion processes. Some free programs exists to solve problems that involve the chemical equilibrium, such as STANJAN, CEA, GASEQ, CANTERA and others.These programs have difficulty for cases involving fuel such as: biomass, vegetable oils, biodiesel, natural gas, etc., because they do not have database with the fuel composition and is hard to supply their HHV and their elementary analysis. In this work, using numeric methods, a program was developed to predict the gases composition on equilibrium after combustion and gasification processes with the for constant pressure or volume. In the program the chemical formula of the fuel is defined as C{sub x}H{sub y}O{sub z}N{sub w}S{sub v}A{sub u} that reacts with an gaseous oxidizer composed by O{sub 2}, N{sub 2}, Ar, He, CO{sub 2} e H{sub 2}O to have as final result the composition of the products CO{sub 2}, CO, H{sub 2}O, H{sub 2}, H, OH, O{sub 2}, O, N{sub 2}, NO, SO{sub 2}, CH{sub 4}, Ar, He, and ash. To verify the accuracy of the calculated values, it was compared with the program CEA (developed by NASA) and with experimental data obtained from literature. (author)

Beyond the GRE: using a composite score to predict 
the success of Puerto Rican students in a biomedical 
PhD program.

Science.gov (United States)

Pacheco, Wendy I; Noel, Richard J; Porter, James T; Appleyard, Caroline B

2015-01-01

The use and validity of the Graduate Record Examination General Test (GRE) to predict the success of graduate school applicants is heavily debated, especially for its possible impact on the selection of underrepresented minorities into science, technology, engineering, and math fields. To better identify candidates who would succeed in our program with less reliance on the GRE and grade point average (GPA), we developed and tested a composite score (CS) that incorporates additional measurable predictors of success to evaluate incoming applicants. Uniform numerical values were assigned to GPA, GRE, research experience, advanced course work or degrees, presentations, and publications. We compared the CS of our students with their achievement of program goals and graduate school outcomes. The average CS was significantly higher in those students completing the graduate program versus dropouts (p thesis defense. In contrast, these outcomes were not predicted by GPA, science GPA, or GRE. Recent implementation of an impromptu writing assessment during the interview suggests the CS can be improved further. We conclude that the CS provides a broader quantitative measure that better predicts success of students in our program and allows improved evaluation and selection of the most promising candidates. © 2015 W. I. Pacheco et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Special issue of Higher-Order and Symbolic Computation

DEFF Research Database (Denmark)

Danvy, Olivier

, they should have a large range of applicability for a large class of specifications or programs. Only general ideas could become the basis for an automatic system for program development. Bob’s APTS system is indeed the incarnation of most of the techniques he proposed (cf. Leonard and Heitmeyer...... specification, expressed in SCR notation, into C. Two translation strategies are discussed in the paper. Both were implemented using Bob Paige’s APTS programtransformation system. “Computational Divided Differencing and Divided-Difference Arithmetics” uses an approach conceptually similar to the Computational...

Design, Fabrication, and Testing of a Composite Rack Prototype in Support of the Deep Space Habitat Program

Science.gov (United States)

Smith, Russ; Hagen, Richard

2015-01-01

In support of the Deep Space Habitat project a number of composite rack prototypes were developed, designed, fabricated and tested to various extents ( with the International Standard Payload Rack configuration, or crew quarters, as a baseline). This paper focuses specifically on a composite rack prototype with a direct tie in to Space Station hardware. The outlined prototype is an all composite construction, excluding metallic fasteners, washers, and their associated inserts. The rack utilizes braided carbon composite tubing for the frame with the sidewalls, backwall and flooring sections utilizing aircraft grade composite honeycomb sandwich panels. Novel additively manufactured thermoplastic joints and tube inserts were also developed in support of this effort. Joint and tube insert screening tests were conducted at a preliminary level. The screening tests allowed for modification, and enhancement, of the fabrication and design approaches, which will be outlined. The initial joint tests did not include mechanical fasteners. Adhesives were utilized at the joint to composite tube interfaces, along with mechanical fasteners during final fabrication (thus creating a stronger joint than the adhesive only variant). In general the prototype was focused on a potential in-space assembly approach, or kit-of-parts construction concept, which would not necessarily require the inclusion of an adhesive in the joint regions. However, given the tie in to legacy Station hardware (and potential flight loads with imbedded hardware mass loadings), the rack was built as stiff and strong as possible. Preliminary torque down tests were also conducted to determine the feasibility of mounting the composite honeycomb panels to the composite tubing sections via the additively manufactured tube inserts. Additional fastener torque down tests were also conducted with inserts (helicoils) imbedded within the joints. Lessons learned are also included and discussed.

Addendum to: Derivation of in situ opalinus clay porewater compositions from experimental and geochemical modelling studies

International Nuclear Information System (INIS)

Bradbury, M.H.; Baeyens; Pearson, F.J.; Berner, U.

1998-01-01

As part of the synthesis of water chemistry studies within the hydrochemical program at Mont Terri (Switzerland), a reexamination of the modelling method showed that it should lead to a range of water compositions rather than to a single composition. The single composition resulted from two compensating oversights, a theoretical one and a modelling one. These are discussed in this Addendum. (author)

Non-linear programming method in optimization of fast reactors

International Nuclear Information System (INIS)

Pavelesku, M.; Dumitresku, Kh.; Adam, S.

1975-01-01

Application of the non-linear programming methods on optimization of nuclear materials distribution in fast reactor is discussed. The programming task composition is made on the basis of the reactor calculation dependent on the fuel distribution strategy. As an illustration of this method application the solution of simple example is given. Solution of the non-linear program is done on the basis of the numerical method SUMT. (I.T.)

The Lewis Chemical Equilibrium Program with parametric study capability

Science.gov (United States)

Sevigny, R.

1981-01-01

The program was developed to determine chemical equilibrium in complex systems. Using a free energy minimization technique, the program permits calculations such as: chemical equilibrium for assigned thermodynamic states; theoretical rocket performance for both equilibrium and frozen compositions during expansion; incident and reflected shock properties; and Chapman-Jouget detonation properties. It is shown that the same program can handle solid coal in an entrained flow coal gasification problem.

EFFECTS OF PHYSICAL ACTIVITY ON BODY COMPOSITION IN ADULT WOMEN

Directory of Open Access Journals (Sweden)

Klára NAGY

2017-06-01

Full Text Available Data published by the World Health Organization (WHO and the International Association for the Study of Obesity (IASO suggests that the number of obese people in Europe has tripled in the last 20 years and resulted in a prevalence of 130 million obese and 400 million people overweight (Sassi et al., 2009.Body composition is the relative percentage of fat and fat-free mass (bones, muscles, organs, water, blood of total body weight. After Wilmore, Buskirk, DiGirolamo and Lohman (1986 the optimal level for health of body fat is 16-25% (18-30% for women.The objective of our study was to assess body composition of adult women, identifying the effect of intervention program on body fat and lean mass, and uncover cases of obesity and overweight.The study involved 95 adult women from Fit4U Fitness Center in Oradea. Period of the study: February 2015 -June 2016. Anthropometric measurements were made: height, weight, circumference, subcutaneous folds. It was calculated the body mass index (BMI, body composition and optimal body weight (estimation based on the five skinfolds measures. The physical activity program consisted of Step -aerobics, Pilates and strength training in the gym, 3 times a week for 60-90 minutes, for 12 months.Results:mean body mass, BMI, BF%, real BF decreased significantly. Mean body fat percentage from 25,63% (± 6,53 decreased to 22,95% (± 5,56. In the studied group overweight and obesity is more frequent in the age group between 35-44 years, but it can be seen the prevalence in all age groups.Conclusions:the physical activity program had a beneficial effect on body composition -by reducing body fat.We found cases of overweight and obesity (21% of the study group.

The Composition of the Master Schedule

Science.gov (United States)

Thomas, Cynthia C.; Behrend, Dirk; MacMillan, Daniel S.

2010-01-01

Over a period of about four months, the IVS Coordinating Center (IVSCC) each year composes the Master Schedule for the IVS observing program of the next calendar year. The process begins in early July when the IVSCC contacts the IVS Network Stations to request information about available station time as well as holiday and maintenance schedules for the upcoming year. Going through various planning stages and a review process with the IVS Observing Program Committee (OPC), the final version of the Master Schedule is posted by early November. We describe the general steps of the composition and illustrate them with the example of the planning for the Master Schedule of the 2010 observing year.

Optimization of composite sandwich cover panels subjected to compressive loadings

Science.gov (United States)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

Composition of web services using Markov decision processes and dynamic programming.

Science.gov (United States)

Uc-Cetina, Víctor; Moo-Mena, Francisco; Hernandez-Ucan, Rafael

2015-01-01

We propose a Markov decision process model for solving the Web service composition (WSC) problem. Iterative policy evaluation, value iteration, and policy iteration algorithms are used to experimentally validate our approach, with artificial and real data. The experimental results show the reliability of the model and the methods employed, with policy iteration being the best one in terms of the minimum number of iterations needed to estimate an optimal policy, with the highest Quality of Service attributes. Our experimental work shows how the solution of a WSC problem involving a set of 100,000 individual Web services and where a valid composition requiring the selection of 1,000 services from the available set can be computed in the worst case in less than 200 seconds, using an Intel Core i5 computer with 6 GB RAM. Moreover, a real WSC problem involving only 7 individual Web services requires less than 0.08 seconds, using the same computational power. Finally, a comparison with two popular reinforcement learning algorithms, sarsa and Q-learning, shows that these algorithms require one or two orders of magnitude and more time than policy iteration, iterative policy evaluation, and value iteration to handle WSC problems of the same complexity.

Foundations of compositional models: structural properties

Czech Academy of Sciences Publication Activity Database

Jiroušek, Radim; Kratochvíl, Václav

2015-01-01

Roč. 44, č. 1 (2015), s. 2-25 ISSN 0308-1079 R&D Projects: GA ČR GA13-20012S Grant - others:GA ČR(CZ) GAP403/12/2175 Program:GA Institutional support: RVO:67985556 Keywords : multidimensional distribution * conditional independence * composition * semigraphoid properties * running intersection property Subject RIV: BA - General Mathematics Impact factor: 1.677, year: 2015 http://library.utia.cas.cz/separaty/2015/MTR/jirousek-0442412.pdf

Critical Joints in Large Composite Primary Aircraft Structures. Volume 3: Ancillary Test Results

Science.gov (United States)

Bunin, Bruce L.; Sagui, R. L.

1985-01-01

A program was conducted to develop the technology for critical structural joints for composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of a comprehensive ancillary test program are summarized, consisting of single-bolt composite joint specimens tested in a variety of configurations. These tests were conducted to characterize the strength and load deflection properties that are required for multirow joint analysis. The composite material was Toray 300 fiber and Ciba-Geigy 914 resin, in the form of 0.005 and 0.01 inch thick unidirectional tape. Tests were conducted in single and double shear for loaded and unloaded hole configurations under both tensile and compressive loading. Two different layup patterns were examined. All tests were conducted at room temperature. In addition, the results of NASA Standard Toughness Test (NASA RP 1092) are reported, which were conducted for several material systems.

Regional food dishes in the Brazilian National School Food Program: Acceptability and nutritional composition

Directory of Open Access Journals (Sweden)

Diogo thimoteo da Cunha

2014-08-01

Full Text Available Objective: the objective of this study was to evaluate the nutritional composition and describe the acceptability of regional culinary dishes served to students from public schools of rural and urban areas. Methods: Ten Brazilian regional dishes were evaluated for acceptability and nutritional composition. the survey was conducted in schools located in rural and urban areas of two cities in the state of São Paulo. Dish acceptability was evaluated using leftover analysis and a 5-point facial hedonic scale. the adherence index was calculated and used as an indirect measure of acceptance, and the nutritional composition was calculated based on the technical files of each dish. Results: A total of 2,384 students from 20 schools participated in the study and 1,174 tasted and evaluated the dishes. the test using the 5-point facial hedonic scale demonstrated that five dishes (Caldo verde soup, persimmon jelly, chicken with okra, puréed cornmeal with spinach, and arugula pizza had an acceptability rate above 85.0%. the mean adherence indices were 57.3% and 55.6% in urban and rural environments, respectively. Analysis of the nutritional composition of regional dishes indicates that these dishes can partially meet macronutrient recommendations. Conclusion: the tested dishes can become part of school menus as they were accepted or partly accepted by the students regardless of school location, whether rural or urban. the cultural heritage is an important resource for the food sovereignty of a country and should be constantly encouraged.

Recent NASA progress in composites. [application to spacecraft and aircraft structures

Science.gov (United States)

Heldenfels, R. R.

1975-01-01

The application of composites in aerospace vehicle structures is reviewed. Research and technology program results and specific applications to space vehicles, aircraft engines, and aircraft and helicopter structures are discussed in detail. Particular emphasis is given to flight service evaluation programs that are or will be accumulating substantial experience with secondary and primary structural components on military and commercial aircraft to increase confidence in their use.

Synthesis and processing of composites by reactive metal penetration

Energy Technology Data Exchange (ETDEWEB)

Loehman, R.E.; Ewsuk, K.G. [Sandia National Labs., Albuquerque, NM (United States); Tomsia, A.P. [Pask Research and Engineering, Berkeley, CA (United States)] [and others

1997-04-01

Achieving better performance in commercial products and processes often is dependent on availability of new and improved materials. Ceramic-metal composites have advantages over more conventional materials because of their high stiffness-to-weight ratios, good fracture toughness, and because their electrical and thermal properties can be varied through control of their compositions and microstructures. However, ceramic composites will be more widely used only when their costs are competitive with other materials and when designers have more confidence in their reliability. Over the past four years reactive metal penetration has been shown to be a promising technique for making ceramic and metal-matrix composites to near-net-shape with control of both composition and microstructure. It appears that, with sufficient development, reactive metal penetration could be an economical process for manufacturing many of the advanced ceramic composites that are needed for light-weight structural and wear applications for transportation and energy conversion devices. Near-net-shape fabrication of parts is a significant advantage because costly and energy intensive grinding and machining operations are substantially reduced, and the waste generated from such finishing operations is minimized. The most promising compositions to date consist of Al and Al{sub 2}O{sub 3}; thus, these composites should be of particular interest to the aluminum industry. The goals of this ceramic-metal composite research and development program are: (1) to identify compositions favorable for making composites by reactive metal penetration; (2) to understand the mechanism(s) by which these composites are formed; (3) to control and optimize the process so that composites and composite coatings can be made economically; and (4) to apply R&D results to problems of interest to the aluminum industry.

An ALARA-conscious hot particle control program

International Nuclear Information System (INIS)

Doolittle, W.W.; Bredvad, R.S.; Bevelacqua, J.J.

1992-01-01

In 1989 approximately twenty-five percent of the radiation dose received by the Point Beach Nuclear Plant (PBNP) Health Physics group was due to its hot particle control program. The Health Physics group initiated a review of the program with the objective of decreasing the dose expenditure for hot particle control while maintaining a high standard for hot particle detection and control. In this paper the methods and results of this evaluation are described. The components of the hot particle control program, rules of thumb, and radionuclide composition at PBNP are presented

THE USE OF CORELDRAW PROGRAM FOR THE REPRESENTATION OF WEFT KNITTED STRUCTURES

Directory of Open Access Journals (Sweden)

INDRIE Liliana

2015-05-01

Full Text Available The representation weft knitted fabrics covers a wide range of methods, which may vary from country to country or may be similar, being used identical or slightly modified. In Romania, currently, for the weft knitted fabrics are used four methods of representing the knitted structures, namely: structural or analytical representation, representation using knitting notations, symbolic representation of the section of stitch courses and representation of drawing design. Generalization of knitted fabrics design using CAD systems determined the development of software design, including 2D representation that can be used for any type of machine. 2D representation of stitches solves the modeling problems and is possible to be executed using different computer graphics programs (CorelDRAW, AUTOCAD, etc. With the help of the graphic editor CORELDRAW it is possible to make the graphical representation of the structure of any kind of weft knitted fabric regardless of its complexity, strating from the simplest ones such as knits with basic weaves (single jersey, rib fabric, links, links and links patterns to the most complex structures such as knitted fabrics with different evolutionary changes of normal stitches (tuck loop knits, missed stitches knits, racked stitches knits, etc. or those with combined designs (knitted jacquard, intarsia knits etc.. This paper presents the possibility of using the CorelDRAW application for representing knitted structures.

Static Mapping of Functional Programs: An Example in Signal Processing

Directory of Open Access Journals (Sweden)

Jack B. Dennis

1996-01-01

Full Text Available Complex signal-processing problems are naturally described by compositions of program modules that process streams of data. In this article we discuss how such compositions may be analyzed and mapped onto multiprocessor computers to effectively exploit the massive parallelism of these applications. The methods are illustrated with an example of signal processing for an optical surveillance problem. Program transformation and analysis are used to construct a program description tree that represents the given computation as an acyclic interconnection of stream-processing modules. Each module may be mapped to a set of threads run on a group of processing elements of a target multiprocessor. Performance is considered for two forms of multiprocessor architecture, one based on conventional DSP technology and the other on a multithreaded-processing element design.

The effect of composition on volatility from a copper alloy

International Nuclear Information System (INIS)

McCarthy, K.A.; Smolik, G.R.; Wallace, R.S.

1994-01-01

During a Loss of Coolant Accident (LOCA) activated structural material can be mobilized through oxidation. Information on how much material is mobilized in an accident is necessary for performing safety assessments of fusion reactor designs. The Fusion Safety Program at the Idaho National Engineering Laboratory has an experimental program to measure mobilized mass as a function of temperature for various oxidizing environments. Materials studied have included beryllium (important because of its toxicity), copper alloys, a niobium alloy, PCA and HT-9 steel, tungsten (pure and an alloy), and a vanadium alloy. Some materials undergo a significant change in composition during irradiation. An example of this is copper (a candidate for the ITER first wall, divertor substrate, and various instrumentation probes and antennas), which can have as much as 1 wt% zinc due to transmutation. Additionally, as the design for ITER evolves, a slightly different copper alloy may be selected. Compositional changes may affect the extent that various elements are volatilized due to such mechanisms as diffusion through the alloy, and penetration and release from oxide layers formed on the material. To accurately calculate offsite doses for various irradiation scenarios, one must understand the effect of composition on volatility

Effect of prenatal programming on heifer development.

Science.gov (United States)

Funston, Richard N; Summers, Adam F

2013-11-01

In beef cattle, the main factors influencing nutrient partitioning between the dam and fetus include age of the dam, number of fetuses, production demand, and environmental stress. These factors play a critical role in programming the fetus for its future environment and available resources. Fetal programming reportedly affects neonatal mortality and morbidity, postnatal growth rate, body composition, health, and reproduction. Two main mechanisms responsible for fetal programming include DNA methylation and histone modifications. Alterations in the genome can be passed through multiple generations. Maternal environment (nutrition, age, physiologic status) can program progeny heifer growth and reproductive performance. Copyright © 2013 Elsevier Inc. All rights reserved.

Advanced mechanics of continua

CERN Document Server

Surana, Karan S

2014-01-01

IntroductionConcepts and Mathematical PreliminariesIntroductionSummation ConventionDummy Index and Dummy VariablesFree IndicesVector and Matrix NotationIndex Notation and Kronecker DeltaPermutation TensorOperations Using Vector, Matrix, and Einstein's NotationChange of Reference Frame, Transformations, TensorsSome Useful RelationsSummary Kinematics of Motion, Deformation and Their MeasuresDescription of MotionLagrangian and Eulerian DescriptionsMaterial Particle Displacements Continuous Deformation and Restrictions on the MotionMaterial Derivative Acceleration of a Material ParticlesCoordinate

Ballistic performance of a Kevlar-29 woven fibre composite under varied temperatures

Science.gov (United States)

Soykasap, O.; Colakoglu, M.

2010-05-01

Armours are usually manufactured from polymer matrix composites and used for both military and non-military purposes in different seasons, climates, and regions. The mechanical properties of the composites depend on temperature, which also affects their ballistic characteristics. The armour is used to absorb the kinetic energy of a projectile without any major injury to a person. Therefore, besides a high strength and lightness, a high damping capacity is required to absorb the impact energy transferred by the projectile. The ballistic properties of a Kevlar 29/polyvinyl butyral composite are investigated under varied temperatures in this study. The elastic modulus of the composite is determined from the natural frequency of composite specimens at different temperatures by using a damping monitoring method. Then, the backside deformation of composite plates is analysed experimentally and numerically employing the finite-element program Abaqus. The experimental and numeric results obtained are in good agreement.

Engineered cementitious composites for strengthening masonry infilled reinforced concrete frames

DEFF Research Database (Denmark)

Dehghani, Ayoub; Nateghi-Alahi, Fariborz; Fischer, Gregor

2015-01-01

The results of the second part of a comprehensive experimental program, aimed at investigating the behavior of masonry infilled reinforced concrete (RC) frames strengthened with fiber reinforced engineered cementitious composites (ECC) used as an overlay on the masonry wall, are presented...

Ontario hydro's aqueous discharge monitoring program

International Nuclear Information System (INIS)

Mehdi, S.H.; Booth, M.R.; Massey, R.; Herrmann, O.

1992-01-01

The Province of Ontario has legislated a comprehensive monitoring program for waterborne trace contaminants called MISA - Municipal Industrial Strategy for Abatement. The electric power sector regulation applies to all generating stations (Thermal, Nuclear, Hydraulic). The program commenced in June, 1990. The current phase of the regulation requires the operators of the plants to measure the detailed composition of the direct discharges to water for a one year period. Samples are to be taken from about 350 identified streams at frequencies varying from continuous and daily to quarterly. The data from this program will be used to determine the scope of the ongoing monitoring program and control. This paper discusses the preparation and planning, commissioning, training and early operations phase of the MISA program. In response, the central Analytical Laboratory and Environmental staff worked to develop a sampling and analytical approach which uses the plant laboratories, the central analytical laboratory and a variety of external laboratories. The approach considered analytical frequency, sample stability, presence of radioactivity, suitability of staff, laboratory qualifications, need for long term internal capabilities, availability of equipment, difficulty of analysis, relationship to other work and problems, capital and operating costs. The complexity of the sampling program required the development of a computer based schedule to ensure that all required samples were taken as required with phase shifts between major sampling events at different plants to prevent swamping the capability of the central or external laboratories. New equipment has been purchased and installed at each plant to collect 24 hour composite samples. Analytical equipment has been purchased for each plant for analysis of perishable analytes or of samples requiring daily or thrice weekly analysis. Training programs and surveys have been implemented to assure production of valid data

Synthesizing Service Composition Models on the Basis of Temporal Business Rules

Institute of Scientific and Technical Information of China (English)

Jian Yu; Yan-Bo Han; Jun Han; Yan Jin; Paolo Falcarin; Maurizio Morisio

2008-01-01

Transformational approaches to generating design and implementation models from requirements can bring effectiveness and quality to software development. In this paper we present a framework and associated techniques to generate the process model of a service composition from a set of temporal business rules. Dedicated techniques including pathfinding, branching structure identification and parallel structure identification are used for semi-automatically synthesizing the process model from the semantics-equivalent Finite State Automata of the rules. These process models naturally satisfy the prescribed behavioral constraints of the rules. With the domain knowledge encoded in the temporal business rules,an executable service composition program, e.g., a BPEL program, can be further generated from the process models. A running example in the e-business domain is used for illustrating our approach throughout this paper.

A development environment for the SSC control system

International Nuclear Information System (INIS)

Murray, Doug; Martinsen, Garth; Wang, Judy

1994-01-01

The SSC is developing a design environment for control system development within the context of EPICS. The environment is aimed at developers of applications using the EPICS Input/Output Controller (IOC). The unique aspect of this effort is our emphasis on providing a simple and intuitive development environment compared with tools currently available. Our most important goal in this effort has been to hide the complexity of EPICS IOC development from the developers. This paper describes two tools which are under development; The Function Block Editor (FBE) and the State Machine Editor (SME). The FBE provides a visual editing environment for graphically describing control processes as a set of related functional blocks. The configuration of functional blocks is then translated into IOC records and executed. SME allows the user to visually construct a sequence using a notation we are modeling after Grafcet [1]. State machines are translated into EPICS State Notation Language programs and executed. Future extensions will be described. ((orig.))

Development of design data for graphite reinforced epoxy and polyimide composites

Science.gov (United States)

Scheck, W. G.

1974-01-01

Processing techniques and design data were characterized for a graphite/epoxy composite system that is useful from 75 K to 450 K, and a graphite/polyimide composite system that is useful from 75 K to 589 K. The Monsanto 710 polyimide resin was selected as the resin to be characterized and used with the graphite fiber reinforcement. Material was purchased using the prepreg specification for the design data generation for both the HT-S/710 and HM-S/710 graphite/polyimide composite system. Lamina and laminate properties were determined at 75 K, 297 K, and 589 K. The test results obtained on the skin-stringer components proved that graphite/polyimide composites can be reliably designed and analyzed much like graphite/epoxy composites. The design data generated in the program includes the standard static mechanical properties, biaxial strain data, creep, fatigue, aging, and thick laminate data.

Ceramic matrix composites -- Advanced high-temperature structural materials

International Nuclear Information System (INIS)

Lowden, R.A.; Ferber, M.K.; DiPietro, S.G.

1995-01-01

This symposium on Ceramic Matrix Composites: Advanced High-Temperature Structural Materials was held at the 1994 MRS Fall Meeting in Boston, Massachusetts on November 28--December 2. The symposium was sponsored by the Department of Energy's Office of Industrial Technology's Continuous Fiber Ceramic Composites Program, the Air Force Office of Scientific Research, and NASA Lewis Research Center. Among the competing materials for advanced, high-temperature applications, ceramic matrix composites are leading candidates. The symposium was organized such that papers concerning constituents--fibers and matrices--were presented first, followed by composite processing, modeling of mechanical behavior, and thermomechanical testing. More stable reinforcements are necessary to enhance the performance and life of fiber-reinforced ceramic composites, and to ensure final acceptance of these materials for high-temperature applications. Encouraging results in the areas of polymer-derived SiC fibers and single crystal oxide filaments were given, suggesting composites with improved thermomechanical properties and stability will be realized in the near future. The significance of the fiber-matrix interface in the design and performance of these materials is evident. Numerous mechanical models to relate interface properties to composite behavior, and interpret test methods and data, were enthusiastically discussed. One issue of great concern for any advanced material for use in extreme environments is stability. This theme arose frequently throughout the symposium and was the topic of focus on the final day. Fifty nine papers have been processed separately for inclusion on the data base

Developing Software to Use Parallel Processing Effectively

Science.gov (United States)

1988-10-01

in which description of an algorithm is strictly separated from its implementation details. 3-22 EDDA is a dataflow design language with graphical...notation sim- ilar to SADT and a semantic structure resembling Petri-Nets. Unlike Petri-Nets, EDDA can represent recursion. An EDDA design contains...predefined functional elements and obeys strict semantic rules, and can therefore be compiled into executable code. Programs are built in EDDA by

Proceedings of the Subcontractors' Review Meeting: Aquatic Species Program

Energy Technology Data Exchange (ETDEWEB)

1981-07-01

The Aquatic Species Program (ASP) addresses the utilization of plant biomass that naturally occurs in wetland or submerged areas. Processes are being developed through this program to make use of such aquatic species, capitalizing on their inherent capacity for rapid growth as well as their extraordinary chemical compositions.

GRUCAL, a computer program for calculating macroscopic group constants

International Nuclear Information System (INIS)

Woll, D.

1975-06-01

Nuclear reactor calculations require material- and composition-dependent, energy averaged nuclear data to describe the interaction of neutrons with individual isotopes in material compositions of reactor zones. The code GRUCAL calculates these macroscopic group constants for given compositions from the material-dependent data of the group constant library GRUBA. The instructions for calculating group constants are not fixed in the program, but will be read at the actual execution time from a separate instruction file. This allows to accomodate GRUCAL to various problems or different group constant concepts. (orig.) [de

Recommendations for composite manufacturing pultrusion process and equipment

Science.gov (United States)

Steiner, R. L.; Cole, J. D.; Strong, A. B.; Todd, R. H.

1992-10-01

Pultrusion is an important composite manufacturing process that holds great potential for reducing the cost of composite parts. However, pultrusion machine manufacturers and those using this continuous process have generally worked in relative isolation from each other and have, therefore, repeated many of the same errors. This paper reports the findings of a research program involving input from 15 pultruder manufacturers who have contributed non-proprietary information for the "best" design for the pultrusion machine. Key areas of design difficulty have been identified and some suggested remedies given. The results of this program will be used to construct a "state-of-the-art" pultrusion machine in the authors' laboratory. The initial findings provided input for a Quality Function Deployment (QFD) study which is basis for the functional specification for the pultrusion machine. By using QFD, capabilities of existing machines were determined and design requirements for an improved state-of-the-art machine were established. The QFD exercise provided an in-depth look at the relationship between desired machine capabilities and machine design requirements.

Composite wind turbine towers

Energy Technology Data Exchange (ETDEWEB)

Polyzois, D. [Manitoba Univ., Winnipeg, MB (Canada). Dept. of Civil Engineering

2008-07-01

This paper discussed experiments conducted to optimized the advanced composite materials such as fiberglass reinforced plastics (FRP) used to fabricate wind turbine towers. FRP materials are used in tubular steel, lattice, guyed, and reinforced concrete towers. The towers and turbine blades are transported in segments and assembled on-site, sometimes in offshore or remote locations.The FRP composites are used to build towers with a high strength-to-weight ratio as well as to provide resistance to chemical attacks and corrosion. Use of the materials has resulted in towers that do not require heavy installation equipment. Experimental programs were conducted to verify the structural behaviour of the tower structure's individual-scaled cells as well as to evaluate the performance of multi-cell assemblies. Joint assembly designs were optimized, and a filament winding machine was used to conduct the experimental study and to test individual cells. Failure mode analyses were conducted to determine local buckling and shear rupture. Tension, compression, and shear properties of the FRP materials were tested experimentally, and data from the test were then used to develop finite element models of the composite towers as well as to obtain load deflection curves and tip oscillation data. A case study of a 750 kW wind turbine in Churchill, Manitoba was used to test the design. tabs., figs.

Investigation of properties and performance of ceramic composite components: Final report on Phases 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Curtin, W.A.; Halverson, H.; Carter, R.H.; Miraj, N.; Reifsnider, K.L. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States)

1998-01-15

The objective of the Fossil Energy Advanced Research and Technology Development (AR and TD) Materials Program is to conduct research and development on materials for longer-term fossil energy applications as well as for generic needs of various fossil fuel technologies. The research program of the Materials Response Group at Virginia Tech addresses the need for reliable and durable structural ceramic composites to perform in high temperature environments. The research effort provides an experimental and analytical basis for the transition from properties of materials to performance of actual component structures. Phases 1 and 2 of the present program focused on the development of test capabilities, initial studies of component mechanical response under various conditions and the development of a life prediction methodology. These efforts have been described in previous reports. This report summarizes the major tasks completed under Phases 3 and 4 of the project. Overall, the authors have made significant progress in a broad spectrum of tasks in this program. Their efforts have encompassed component evaluation, assessment of new SiC-based composites with improved high-temperature potential, development of oxide coating materials for SiC, and the extension and development of new models for predicting the durability of composite components under specific operating conditions for various CMC applications. Each of these areas of work is an important area for achieving the ultimate goal of usable SiC-based composites in high-temperature corrosive environments typical of fossil energy applications.

Understanding Service Composition with Non-functional Properties Using Declarative Model-to-model Transformations

Directory of Open Access Journals (Sweden)

Max Mäuhlhäuser

2011-01-01

Full Text Available Developing applications comprising service composition is a complex task. Therefore, to lower the skill barrier for developers, it is important to describe the problem at hand on an abstract level and not to focus on implementation details. This can be done using declarative programming which allows to describe only the result of the problem (which is what the developer wants rather than the description of the implementation. We therefore use purely declarative model-to-model transformations written in a universal model transformation language which is capable of handling even non functional properties using optimization and mathematical programming. This makes it easier to understand and describe service composition and non-functional properties for the developer.

Chromium picolinate effects on body composition and muscular performance in wrestlers.

Science.gov (United States)

Walker, L S; Bemben, M G; Bemben, D A; Knehans, A W

1998-12-01

The purpose of this study was to assess the effects of 14 wk of chromium picolinate supplementation during the final 16 wk of a preseason resistance and conditioning program on body composition and neuromuscular performance in NCAA Division I wrestlers. During this phase of training, wrestlers are primarily interested in trying to improve physical performance and wrestling technique and are not engaged in severe, acute weight loss practices commonly employed before competition. This double-blinded, randomized placebo-controlled study involved 20 wrestlers from the University of Oklahoma assigned to either a treatment group (Cr+3; N = 7; 20.4 yr +/- 0.1) receiving 200 micrograms chromium picolinate daily, a placebo group (P; N = 7; 19.9 yr +/- 0.2), or a control group (C; N = 6; 20.2 yr +/- 0.1) using a stratified random sampling technique based on weight classification. Body composition, neuromuscular performance, metabolic performance, and serum insulin and glucose were measured before and immediately following the supplementation and training period. Repeated measures ANOVA indicated no significant changes in body composition for any of the groups. Aerobic power increased significantly (P pre- to post-test changes in bench press power were significant. These results suggest that chromium picolinate supplementation coupled with a typical preseason training program does not enhance body composition or performance variables beyond improvements seen with training alone.

The tensile strength of mechanical joint prototype of lontar fiber composite

Science.gov (United States)

Bale, Jefri; Adoe, Dominggus G. H.; Boimau, Kristomus; Sakera, Thomas

2018-03-01

In the present study, an experimental activity has been programmed to investigate the effect of joint prototype configuration on tensile strength of lontar (Borassus Flabellifer) fiber composite. To do so, a series of tests were conducted to establish the tensile strength of different joint prototype configuration specimen of lontar fiber composite. In addition, post observation of macroscope was used to map damage behavior. The analysis of lontar fiber composite is a challenge since the material has limited information than others natural fiber composites materials. The results shown that, under static tensile loading, the tensile strength of 13 MPa produced by single lap joint of lontar fiber composite is highest compare to 11 MPa of tensile strength generated by step lap joint and double lap joint where produced the lowest tensile strength of 6 MPa. It is concluded that the differences of tensile strength depend on the geometric dimensions of the cross-sectional area and stress distribution of each joint prototype configuration.

Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very...

A systematic investigation of the link between rational number processing and algebra ability.

Science.gov (United States)

Hurst, Michelle; Cordes, Sara

2018-02-01

Recent research suggests that fraction understanding is predictive of algebra ability; however, the relative contributions of various aspects of rational number knowledge are unclear. Furthermore, whether this relationship is notation-dependent or rather relies upon a general understanding of rational numbers (independent of notation) is an open question. In this study, college students completed a rational number magnitude task, procedural arithmetic tasks in fraction and decimal notation, and an algebra assessment. Using these tasks, we measured three different aspects of rational number ability in both fraction and decimal notation: (1) acuity of underlying magnitude representations, (2) fluency with which symbols are mapped to the underlying magnitudes, and (3) fluency with arithmetic procedures. Analyses reveal that when looking at the measures of magnitude understanding, the relationship between adults' rational number magnitude performance and algebra ability is dependent upon notation. However, once performance on arithmetic measures is included in the relationship, individual measures of magnitude understanding are no longer unique predictors of algebra performance. Furthermore, when including all measures simultaneously, results revealed that arithmetic fluency in both fraction and decimal notation each uniquely predicted algebra ability. Findings are the first to demonstrate a relationship between rational number understanding and algebra ability in adults while providing a clearer picture of the nature of this relationship. © 2017 The British Psychological Society.

On the simulation of kink bands in fiber reinforced composites

DEFF Research Database (Denmark)

Sørensen, K.D.; Mikkelsen, Lars Pilgaard; Jensen, H.M.

2007-01-01

Simulations of kink band formation in fiber reinforced composites are carried out using the commercial finite element program ABAQUS. A smeared-out, plane constitutive model for fiber reinforced materials is implemented as a user subroutine, and effects of fiber misalignment on elastic and plastic...

Exercise affects body composition but not weight in postmenopausal women.

NARCIS (Netherlands)

Velthuis, M.J.; Schuit, A.J.; Peeters, P.H.M.; Monninkhof, E.M.

2009-01-01

OBJECTIVE: The aim of this study was to investigate the effect of a 12-month moderate-to-vigorous exercise program combining aerobic and muscle strength training on body composition among sedentary, postmenopausal women. METHODS: A randomized controlled trial was conducted. A total of 189 sedentary

A Computer Program for Short Circuit Analysis of Electric Power ...

African Journals Online (AJOL)

The Short Circuit Analysis Program (SCAP) is to be used to assess the composite effects of unbalanced and balanced faults on the overall reliability of electric power system. The program uses the symmetrical components method to compute all phase and sequence quantities for any bus or branch of a given power network ...

Experimental and Numerical Study of FRP Encased Composite Concrete Columns

Directory of Open Access Journals (Sweden)

Mohsen Ishaghian

2017-02-01

Full Text Available A new type of composite column is presented and assessed through experimental testing and numerical modeling. The objective of this research is to investigate design options for a composite column without the use of ferrous materials. This is to avoid the current problem of deterioration of concrete due to expansion of rusting reinforcement members. Such a target can be achieved by replacing the steel reinforcement of concrete columns with pultruded I-shape glass FRP structural sections. The composite column utilizes a glass FRP tube that surrounds a pultruded I-section glass FRP, which is subsequently filled with concrete. The GFRP tube acts as a stay-in-place form in addition to providing confinement to the concrete. A total of four composite columns were tested under monotonic axial loading. The experimental ultimate capacity of each of the tested composite column was compared to the predicted numerical capacity using ANSYS program. The comparison showed that the predicted numerical values were in good agreement with the experimental ones.

U.S. Advanced Materials Development Program for steam generators

International Nuclear Information System (INIS)

Patriarca, P.; Harkness, S.D.; Duke, J.M.

1975-01-01

The selection of construction materials for LMFBR steam generators is reviewed, presenting the advantages and limitations of 2 1 / 2 Cr-1 Mo steel selected for the Clinch River Breeder Reactor Plant. These limitations indicate that further development of high-strength ferritic steels containing 9 to 12 percent Cr and the high-nickel Alloy 800 could lead to superior materials, and programs to develop these materials have been started. Combustion Engineering has surveyed the experience with the high-strength ferritic steels and prepared ingots of 26 selected compositions. Charpy V-notch tests and metallography have been used to characterize these alloys, and optimum welding rod compositions for these alloys are under development. Westinghouse-Tampa is undertaking a program to gain code acceptance of Alloy 800. A program has been set up to provide the information required for design, justification, and fabrication of reliable components. Progress has been made on characterization, the role of tertiary creep in failure, and the development of welding processes. (U.S.)

Baseline atmospheric program Australia 1993

International Nuclear Information System (INIS)

Francey, R.J.; Dick, A.L.; Derek, N.

1996-01-01

This publication reports activities, program summaries and data from the Cape Grim Baseline Air Pollution Station in Tasmania, during the calendar year 1993. These activities represent Australia's main contribution to the Background Air Pollution Monitoring Network (BAPMoN), part of the World Meteorological Organization's Global Atmosphere Watch (GAW). The report includes 5 research reports covering trace gas sampling, ozone and radon interdependence, analysis of atmospheric dimethylsulfide and carbon-disulfide, sampling of trace gas composition of the troposphere, and sulfur aerosol/CCN relationship in marine air. Summaries of program reports for the calendar year 1993 are also included. Tabs., figs., refs

Palliative Workforce Development and a Regional Training Program.

Science.gov (United States)

O'Mahony, Sean; Levine, Stacie; Baron, Aliza; Johnson, Tricia J; Ansari, Aziz; Leyva, Ileana; Marschke, Michael; Szmuilowicz, Eytan; Deamant, Catherine

2018-01-01

Our primary aims were to assess growth in the local hospital based workforce, changes in the composition of the workforce and use of an interdisciplinary team, and sources of support for palliative medicine teams in hospitals participating in a regional palliative training program in Chicago. PC program directors and administrators at 16 sites were sent an electronic survey on institutional and PC program characteristics such as: hospital type, number of beds, PC staffing composition, PC programs offered, start-up years, PC service utilization and sources of financial support for fiscal years 2012 and 2014. The median number of consultations reported for existing programs in 2012 was 345 (IQR 109 - 2168) compared with 840 (IQR 320 - 4268) in 2014. At the same time there were small increases in the overall team size from a median of 3.2 full time equivalent positions (FTE) in 2012 to 3.3 FTE in 2013, with a median increase of 0.4 (IQR 0-1.0). Discharge to hospice was more common than deaths in the acute care setting in hospitals with palliative medicine teams that included both social workers and advanced practice nurses ( p < .0001). Given the shortage of palliative medicine specialist providers more emphasis should be placed on training other clinicians to provide primary level palliative care while addressing the need to hire sufficient workforce to care for seriously ill patients.

Estimation of physical properties of laminated composites via the method of inverse vibration problem

Energy Technology Data Exchange (ETDEWEB)

Balci, Murat [Dept. of Mechanical Engineering, Bayburt University, Bayburt (Turkmenistan); Gundogdu, Omer [Dept. of Mechanical Engineering, Ataturk University, Erzurum (Turkmenistan)

2017-01-15

In this study, estimation of some physical properties of a laminated composite plate was conducted via the inverse vibration problem. Laminated composite plate was modelled and simulated to obtain vibration responses for different length-to-thickness ratio in ANSYS. Furthermore, a numerical finite element model was developed for the laminated composite utilizing the Kirchhoff plate theory and programmed in MATLAB for simulations. Optimizing the difference between these two vibration responses, inverse vibration problem was solved to obtain some of the physical properties of the laminated composite using genetic algorithms. The estimated parameters are compared with the theoretical results, and a very good correspondence was observed.

Estimation of physical properties of laminated composites via the method of inverse vibration problem

International Nuclear Information System (INIS)

Balci, Murat; Gundogdu, Omer

2017-01-01

In this study, estimation of some physical properties of a laminated composite plate was conducted via the inverse vibration problem. Laminated composite plate was modelled and simulated to obtain vibration responses for different length-to-thickness ratio in ANSYS. Furthermore, a numerical finite element model was developed for the laminated composite utilizing the Kirchhoff plate theory and programmed in MATLAB for simulations. Optimizing the difference between these two vibration responses, inverse vibration problem was solved to obtain some of the physical properties of the laminated composite using genetic algorithms. The estimated parameters are compared with the theoretical results, and a very good correspondence was observed

Development of bonded composite doublers for the repair of oil recovery equipment.

Energy Technology Data Exchange (ETDEWEB)

Roach, David W.; Rackow, Kirk A.

2005-06-01

An unavoidable by-product of a metallic structure's use is the appearance of crack and corrosion flaws. Economic barriers to the replacement of these structures have created an aging infrastructure and placed even greater demands on efficient and safe repair methods. In the past decade, an advanced composite repair technology has made great strides in commercial aviation use. Extensive testing and analysis, through joint programs between the Sandia Labs FAA Airworthiness Assurance Center and the aviation industry, have proven that composite materials can be used to repair damaged aluminum structure. Successful pilot programs have produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. With this foundation in place, this effort is adapting bonded composite repair technology to civil structures. The use of bonded composite doublers has the potential to correct the difficulties associated with current repair techniques and the ability to be applied where there are no rehabilitation options. It promises to be cost-effective with minimal disruption to the users of the structure. This report concludes a study into the application of composite patches on thick steel structures typically used in mining operations. Extreme fatigue, temperature, erosive, and corrosive environments induce an array of equipment damage. The current weld repair techniques for these structures provide a fatigue life that is inferior to that of the original plate. Subsequent cracking must be revisited on a regular basis. The use of composite doublers, which do not have brittle fracture problems such as those inherent in welds, can help extend the structure's fatigue life and reduce the equipment downtime. Two of the main issues for adapting aircraft composite repairs to civil applications are developing an installation technique for carbon steel and accommodating large repairs on extremely thick

Bimetallic iron and cobalt incorporated MFI/MCM-41 composite and its catalytic properties

International Nuclear Information System (INIS)

Li, Baoshan; Xu, Junqing; Li, Xiao; Liu, Jianjun; Zuo, Shengli; Pan, Zhiyun; Wu, Ziyu

2012-01-01

Graphical abstract: The formation of FeCo-MFI/MCM-41 composite is based on two steps, the first step of synthesizing the MFI-type proto-zeolite unites under hydrothermal conditions. The second step of assembling these zeolite fragment together new silica and heteroatom source on the CTAB surfactant micelle to synthesize the mesoporous product with hexagonal structure. Highlights: ► Bimetallic iron and cobalt incorporated MFI/MCM-41 composite was prepared using templating method. ► FeCo-MFI/MCM-41 composite simultaneously possessed two kinds of meso- and micro-porous structures. ► Iron and cobalt ions incorporated into the silica framework with tetrahedral coordination. -- Abstract: The MFI/MCM-41 composite material with bimetallic Fe and Co incorporation was prepared using templating method via a two-step hydrothermal crystallization procedure. The obtained products were characterized by a series of techniques including powder X-ray diffraction, N 2 sorption, transmission electron microscopy, scanning electron microscope, H 2 temperature programmed reduction, thermal analyses, and X-ray absorption fine structure spectroscopy of the Fe and Co K-edge. The catalytic properties of the products were investigated by residual oil hydrocracking reactions. Characterization results showed that the FeCo-MFI/MCM-41 composite simultaneously possessed two kinds of stable meso- and micro-porous structures. Iron and cobalt ions were incorporated into the silicon framework, which was confirmed by H 2 temperature programmed reduction and X-ray absorption fine structure spectroscopy. This composite presented excellent activities in hydrocracking of residual oil, which was superior to the pure materials of silicate-1/MCM-41.

Composite gravity and composite supergravity

International Nuclear Information System (INIS)

Lukierski, J.

1982-09-01

It is known that the composite YM H-gauge theory can be constructed from σ-fields taking values in a symmetric Riemannian space G/H. We extend such a framework to graded σ-fields taking values in supercosets. We show that from supercoset σ-fields one can construct composite gravity, and from supercoset σ-superfields the composite supergravity models. (author)

Data on post irradiation experiments of heat resistant ceramic composite materials. PIE for 97M-13A

Energy Technology Data Exchange (ETDEWEB)

Baba, Shin-ichi; Ishihara, Masahiro; Souzawa, Shizuo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Sekino, Hajime [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2003-03-01

The research on the radiation damage mechanism of heat resistant ceramic composite materials is one of the research subjects of the innovative basic research in the field of high temperature engineering, using the High Temperature engineering Test Reactor (HTTR). Three series of irradiation tests on the heat resistant ceramic composite materials, first to third irradiation test program, were carried out using the Japan Material Testing Reactor (JMTR). This is a summary report on the first irradiation test program; irradiation induced dimensional change, thermal expansion coefficient, X-ray diffraction and {gamma}-ray spectrum are reported. (author)

Process conditions and volumetric composition in composites

DEFF Research Database (Denmark)

Madsen, Bo

2013-01-01

The obtainable volumetric composition in composites is linked to the gravimetric composition, and it is influenced by the conditions of the manufacturing process. A model for the volumetric composition is presented, where the volume fractions of fibers, matrix and porosity are calculated...... as a function of the fiber weight fraction, and where parameters are included for the composite microstructure, and the fiber assembly compaction behavior. Based on experimental data of composites manufactured with different process conditions, together with model predictions, different types of process related...... effects are analyzed. The applied consolidation pressure is found to have a marked effect on the volumetric composition. A power-law relationship is found to well describe the found relations between the maximum obtainable fiber volume fraction and the consolidation pressure. The degree of fiber...

Improving Turbine Performance with Ceramic Matrix Composites

Science.gov (United States)

DiCarlo, James A.

2007-01-01

Under the new NASA Fundamental Aeronautics Program, efforts are on-going within the Supersonics Project aimed at the implementation of advanced SiC/SiC ceramic composites into hot section components of future gas turbine engines. Due to recent NASA advancements in SiC-based fibers and matrices, these composites are lighter and capable of much higher service temperatures than current metallic superalloys, which in turn will allow the engines to operate at higher efficiencies and reduced emissions. This presentation briefly reviews studies within Task 6.3.3 that are primarily aimed at developing physics-based concepts, tools, and process/property models for micro- and macro-structural design, fabrication, and lifing of SiC/SiC turbine components in general and airfoils in particular. Particular emphasis is currently being placed on understanding and modeling (1) creep effects on residual stress development within the component, (2) fiber architecture effects on key composite properties such as design strength, and (3) preform formation processes so that the optimum architectures can be implemented into complex-shaped components, such as turbine vanes and blades.

Information Security Considerations for Applications Using Apache Accumulo

Science.gov (United States)

2014-09-01

Distributed File System INSCOM United States Army Intelligence and Security Command JPA Java Persistence API JSON JavaScript Object Notation MAC Mandatory... MySQL [13]. BigTable can process 20 petabytes per day [14]. High degree of scalability on commodity hardware. NoSQL databases do not rely on highly...manipulation in relational databases. NoSQL databases each have a unique programming interface that uses a lower level procedural language (e.g., Java

Language and thought: the signals language in the problem solving / Pensamento e linguagem: a língua de sinais na resolução de problemas

OpenAIRE

Maria Helena Fávero; Meireluce Leite Pimenta

2006-01-01

The relationship between thought/language and sign language is discussed in a study about the resolution of mathematical problems, involving deaf subjects aged between 18 and 30, public school students from the initial grades of the Educational Program for Young Adults and Adults in the Distrito Federal (federal capital of Brazil). The study was developed in three phases: evaluation of the subjects' mathematical competencies, regarding the logic of the numerical system and its notation; resea...

Kevlar/PMR-15 polyimide matrix composite for a complex shaped DC-9 drag reduction fairing

Science.gov (United States)

Kawai, R. T.; Mccarthy, R. F.; Willer, M. S.; Hrach, F. J.

1982-01-01

The Aircraft Energy Efficiency (ACEE) Program was established by NASA to improve the fuel efficiency of commercial transport aircraft and thereby to reduce the amount of fuel consumed by the air transportation industry. One of the final items developed by the program is an improved fairing which is the aft closure for the thrust reverser actuators on the JT8D nacelles on DC-9 aircraft. The reduced-drag fairing uses, in the interest of weight savings, an advanced composite construction. The composite material contains Kevlar 49 fibers in a PMR-15 matrix. Attention is given to the aerodynamic configuration, the material system, and aspects of fabrication development.

Optically transparent composite diamond/Ti electrodes

Czech Academy of Sciences Publication Activity Database

Ashcheulov, Petr; Taylor, Andrew; More Chevalier, Joris; Kovalenko, A.; Remeš, Zdeněk; Drahokoupil, Jan; Hubík, Pavel; Fekete, Ladislav; Klimša, Ladislav; Kopeček, Jaromír; Remiášová, Jarmila; Kohout, Michal; Frank, Otakar; Kavan, Ladislav; Mortet, Vincent

2017-01-01

Roč. 119, Aug (2017), s. 179-189 ISSN 0008-6223 R&D Projects: GA MŠk LO1409; GA MŠk LM2015088; GA ČR GA13-31783S Grant - others:FUNBIO(XE) CZ.2.16/3.1.00/21568; AV ČR(CZ) Fellowship J. E. Purkyně; AV ČR(CZ) MSM100101602 Program:Program na podporu mezinárodní spolupráce začínajících výzkumných pracovníků Institutional support: RVO:68378271 ; RVO:61388955 Keywords : diamond * transparent film * composite electrode * conductive thin film Subject RIV: BM - Solid Matter Physics ; Magnetism; CF - Physical ; Theoretical Chemistry (UFCH-W) OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.); Physical chemistry (UFCH-W) Impact factor: 6.337, year: 2016

A generic architecture for an adaptive, interoperable and intelligent type 2 diabetes mellitus care system.

Science.gov (United States)

Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Schulz, Stefan

2015-01-01

Chronic diseases such as Type 2 Diabetes Mellitus (T2DM) constitute a big burden to the global health economy. T2DM Care Management requires a multi-disciplinary and multi-organizational approach. Because of different languages and terminologies, education, experiences, skills, etc., such an approach establishes a special interoperability challenge. The solution is a flexible, scalable, business-controlled, adaptive, knowledge-based, intelligent system following a systems-oriented, architecture-centric, ontology-based and policy-driven approach. The architecture of real systems is described, using the basics and principles of the Generic Component Model (GCM). For representing the functional aspects of a system the Business Process Modeling Notation (BPMN) is used. The system architecture obtained is presented using a GCM graphical notation, class diagrams and BPMN diagrams. The architecture-centric approach considers the compositional nature of the real world system and its functionalities, guarantees coherence, and provides right inferences. The level of generality provided in this paper facilitates use case specific adaptations of the system. By that way, intelligent, adaptive and interoperable T2DM care systems can be derived from the presented model as presented in another publication.

Multi-shape active composites by 3D printing of digital shape memory polymers.

Science.gov (United States)

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L; Qi, H Jerry

2016-04-13

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Multi-shape active composites by 3D printing of digital shape memory polymers

Science.gov (United States)

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L.; Qi, H. Jerry

2016-04-01

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Process modeling style

CERN Document Server

Long, John

2014-01-01

Process Modeling Style focuses on other aspects of process modeling beyond notation that are very important to practitioners. Many people who model processes focus on the specific notation used to create their drawings. While that is important, there are many other aspects to modeling, such as naming, creating identifiers, descriptions, interfaces, patterns, and creating useful process documentation. Experience author John Long focuses on those non-notational aspects of modeling, which practitioners will find invaluable. Gives solid advice for creating roles, work produ

LMPS como propuesta alterna a BPMN para el modelado de procesos de software

Directory of Open Access Journals (Sweden)

Sandro Javier Bolaños Castro

2012-12-01

Full Text Available This paper presents an overview of the recently-released LMPS (Lenguaje de Modelado de Procesos de Software language, intended for modeling software processes. LMPS is compared with the BPMN (Business Process Management Notation standard, establishing differences and similarities in their notation, perspective, tools and proposal. The idea is to highlight the advantages and disadvantages of using each of the notations and encourage the reader’s reflections about an alternative approach that allows modeling software processes in an easy and customized way.

On the Tuning and the Mass of the Composite Higgs

CERN Document Server

Panico, Giuliano; Tesi, Andrea; Wulzer, Andrea

2013-01-01

We analyze quantitatively the tuning of composite Higgs models with partial compositeness and its interplay with the predicted Higgs mass. In this respect we identify three classes of models, characterized by different quantum numbers of the fermionic colored resonances associated with the top quark, the so-called top partners. The main result of this classification is that in all models with moderate tuning a light Higgs, of 125 GeV mass, requires the presence of light top partners, around 1 TeV. The minimal tuning is comparable to the one of the most attractive supersymmetric models in particular the ones realizing Natural SUSY. This gives further support to an extensive program of top partners searches at the LHC that can already probe the natural region of composite Higgs models.

Shape Memory Alloy Modeling and Applications to Porous and Composite Structures

Science.gov (United States)

Zhu, Pingping

There has been a growing concern about an exciting class of advanced material -- shape memory alloys (SMAs) since their discovery several decades ago. SMAs exhibit large reversible stresses and strains owing to a thermoelastic phase transformation. They have been widely used in many engineering fields including aerospace, biomedical, and automotive engineering, especially as sensors, actuators, bone implants and deployable switches. The behavior of SMAs is very complex due to the coupling between thermal and mechanical effects. Theoretical and computational tools are used in this dissertation to investigate the mechanical behavior of SMA and its related structures for seeking better and wider application of this material. In the first part of this dissertation, we proposed an improved macroscopic phenomenological constitutive model of SMA that accounts for all major mechanical behaviors including elasticity, phase transformation, reorientation and plasticity. The model is based on some previous work developed in the Brinson group, and the current efforts are focused on plasticity, the application of a pre-defined strain, unification of notations, and other coding-related work. A user subroutine script VUMAT is developed to implement the constitutive model to the commercial finite element software Abaqus. Typical simulation results based on the model are presented, as well as verification with some experimental results. In the second part, we apply the developed constitutive model to a series of two-dimensional SMA plates with structured arrays of pores to investigate the structural response, especially the stress, strain, phase transformation, and plastic fields. Results are documented about the coupling of the elastic, transformation and plastic fields about the arrays of pores. Theoretical and experimental DIC results are also utilized to validate some simulation results. Conclusions are then drawn to provide understanding in the effect of pores and the

TraceContract: A Scala DSL for Trace Analysis

Science.gov (United States)

Barringer, Howard; Havelund, Klaus

2011-01-01

In this paper we describe TRACECONTRACT, an API for trace analysis, implemented in the SCALA programming language. We argue that for certain forms of trace analysis the best weapon is a high level programming language augmented with constructs for temporal reasoning. A trace is a sequence of events, which may for example be generated by a running program, instrumented appropriately to generate events. The API supports writing properties in a notation that combines an advanced form of data parameterized state machines with temporal logic. The implementation utilizes SCALA's support for defining internal Domain Specific Languages (DSLs). Furthermore SCALA's combination of object oriented and functional programming features, including partial functions and pattern matching, makes it an ideal host language for such an API.

A reliability based stress-life evaluation of aluminium-graphite particulate composites

International Nuclear Information System (INIS)

Achutha, M.V.; Sridhara, B.K.; Abdul Budan, D.

2008-01-01

Fatigue tests were conducted on sand cast aluminium-graphite composite specimens on Rotating Beam Fatigue Testing Machine with three different stress levels. Aluminium-graphite (LM 25-5% graphite) composite was processed by closed mould sand casting method. Three-stress level fatigue test program was planned for carrying out fatigue experiments. Three different stress levels selected for fatigue experiments were a fraction of ultimate tensile strength. Statistical design of fatigue experiments was carried out to determine the sample size at each stress level. Experimental results are presented in the form of stress-life (S-N) curves and reliability-stress-life (R-S-N) curves, which are helpful for designers. The S-N curve of the aluminium-graphite composite was compared with its matrix alloy LM 25. Comparison revealed that the fatigue behaviour of the aluminium-graphite composite is superior to that of the matrix alloy

The advanced thermionics initiative...program update

International Nuclear Information System (INIS)

Lamp, T.R.; Donovan, B.D.

1993-01-01

The United States Air Force has had a long standing interest in thermionic space power dating back to the early 1960s when a heat pipe cooled thermionic converter was demonstrated through work at the predecessor to Wright Laboratory (WL). With the exception of the short hiatus in the mid-70s, Air Force thermionics work at Wright Laboratory has continued to the present time with thermionic technology programs including the burst power thermionic phase change concepts, heat pipe cooled planar diodes, and advanced in-core concept developments such as composite materials, insulators and oxygenation. The Advanced Thermionics Initiative (ATI) program was organized to integrate thermionic technology advances into a converter suitable for in-core reactor applications in the 10 to 40 kWe power range. As an advanced thermionics technology program, the charter and philosophy of the ATI program is to provide the needed advanced converter concepts in support of national thermionic space power programs

Children's note taking as a mnemonic tool.

Science.gov (United States)

Eskritt, Michelle; McLeod, Kellie

2008-09-01

When given the opportunity to take notes in memory tasks, children sometimes make notes that are not useful. The current study examined the role that task constraints might play in the production of nonmnemonic notes. In Experiment 1, children played one easy and one difficult memory game twice, once with the opportunity to make notes and once without that opportunity. More children produced functional notations for the easier task than for the more difficult task, and their notations were beneficial to memory performance. Experiment 2 found that the majority of children who at first made nonmnemonic notations were able to produce functional notations with minimal training, and there was no significant difference in notation quality or memory performance between spontaneous and trained note takers. Experiment 3 revealed that the majority of children could transfer their training to a novel task. The results suggest that children's production of nonmnemonic notes may be due in part to a lack of knowledge regarding what task information is important to represent or how to represent it in their notes rather than to an inability to make functional notes in general.

Mechanical interaction of Engineered Cementitious Composite (ECC) reinforced with Fiber Reinforced Polymer (FRP) rebar in tensile loading

DEFF Research Database (Denmark)

Lárusson, Lárus Helgi; Fischer, Gregor; Jönsson, Jeppe

2010-01-01

This paper introduces a preliminary study of the composite interaction of Engineered Cementitious Composite (ECC), reinforced with Glass Fiber Reinforced Polymer (GFRP) rebar. The main topic of this paper will focus on the interaction of the two materials (ECC and GFRP) during axial loading......, particularly in post cracking phase of the concrete matrix. The experimental program carried out in this study examined composite behavior under monotonic and cyclic loading of the specimens in the elastic and inelastic deformation phases. The stiffness development of the composite during loading was evaluated...

Design of benign matrix drums for the non-destructive assay performance demonstration program for the National TRU Program

International Nuclear Information System (INIS)

Becker, G.K.

1996-09-01

Regulatory compliance programs associated with the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Transuranic (TRU) Waste Characterization Program (the Program) require the collection of waste characterization data of known quality to support repository performance assessment, permitting, and associated activities. Blind audit samples, referred to as PDP (performance demonstration program) samples, are devices used in the NDA PDP program to acquire waste NDA system performance data per defined measurement routines. As defined under the current NDA PDP Program Plan, a PDP sample consists of a DOT 17C 55-gallon PDP matrix drum configured with insertable radioactive standards, working reference materials (WRMs). The particular manner in which the matrix drum and PDP standard(s) are combined is a function of the waste NDA system performance test objectives of a given cycle. The scope of this document is confined to the design of the PDP drum radioactive standard internal support structure, the matrix type and the as installed configuration. The term benign is used to designate a matrix possessing properties which are nominally non-interfering to waste NDA measurement techniques. Measurement interference sources are technique specific but include attributes such as: high matrix density, heterogeneous matrix distributions, matrix compositions containing high moderator/high Z element concentrations, etc. To the extent practicable the matrix drum design should not unduly bias one NDA modality over another due to the manner in which the matrix drum configuration manifests itself to the measurement system. To this end the PDP matrix drum configuration and composition detailed below is driven primarily by the intent to minimize the incorporation of matrix attributes known to interfere with fundamental waste NDA modalities, i.e. neutron and gamma based techniques

UML in business process modeling

Directory of Open Access Journals (Sweden)

Bartosz Marcinkowski

2013-03-01

Full Text Available Selection and proper application of business process modeling methods and techniques have a significant impact on organizational improvement capabilities as well as proper understanding of functionality of information systems that shall support activity of the organization. A number of business process modeling notations were popularized in practice in recent decades. Most significant of the notations include Business Process Modeling Notation (OMG BPMN and several Unified Modeling Language (OMG UML extensions. In this paper, the assessment whether one of the most flexible and strictly standardized contemporary business process modeling notations, i.e. Rational UML Profile for Business Modeling, enable business analysts to prepare business models that are all-embracing and understandable by all the stakeholders. After the introduction, methodology of research is discussed. Section 2 presents selected case study results. The paper is concluded with a summary.

DP: Parameter Display Page Program

International Nuclear Information System (INIS)

Anderson, M.

1994-01-01

The Parameter Display Page program (DP) is a Motif/X11-based program to allow easily configured, dynamic device and process variable monitoring and manipulation in the EPICS environment. DP provides a tabular data format for interactive viewing and manipulation of device and process variable statistics, as well as formatted PostScript output to files and printers. DP understands and operates in two (unfortunately disjoint at this time) namespaces in the EPICS environment ''devices'' and ''process variables''. The higher level namespace of devices includes Composite and Atomic Devices registered via the Device Access server; the lower level (flat) namespace is that of normal Process Variables accessible via Channel Access

Special report writer: A flexible information management system. Documentation and user's manual

Science.gov (United States)

Greene, W. A.

1976-01-01

A special report writer (SSR) was developed which performs multiple correlations on files containing several data hierarchies. Output reports are specified in a simple notation, readily learned by persons having limited familarity with ADP. The SRR system can be adopted by other NASA installations while the basic techniques themselves are compatible with the information management needs of a wide range of organizations. Specifically, the program lends itself to generalization and can be readily adapted for other file management purposes. Extensive details on the characteristics of the SRR program are presented along with a full explanation of the system for those contemplating its application to other data bases. The complete COBOL program and documentation are available.

Implementing a campus wide recycling program

International Nuclear Information System (INIS)

Alvarez, L.

2002-01-01

'Full text:' The University of Windsor is currently expanding its recycling program to include all buildings on campus, but faces two challenges: 1) uncertainty about the current waste composition and distribution on campus; and 2) uncertainty about the effectiveness of increased recycling. This project assesses the current waste composition and the attitudes of the students towards recycling, and evaluates the effectiveness of proposed recycling activities. At present, paper is the only material that is collected throughout the entire campus. Except for two buildings, all other potentially recyclable materials within buildings, such as metal, glass, and plastic beverage containers, are discarded. The main focus of this research is on beverage containers as they represent clearly identifiable materials, but other materials were examined as well. To quantify the waste, different buildings on campus were classified according to their function: academic,operational and administrative. The waste composition study indicated that approximately 33% of the campus waste which is landfilled is composed of potentially recyclable material. A survey was then conducted to gauge the campus population's views on recycling issues that could affect the design of a recycling program. Interestingly, 97% of the respondents indicated a high willingness to recycle, but were uncertain as to how and where to recycle on campus. The project is currently assessing potential diversion rates using new, clearly identifiable recycling receptacles placed within selected classrooms for all major materials. There is a significant tradeoff however because the cost for new receptacles is considerable: multiple materials containers are often placed in high pedestrian traffic locations (e.g., hallways) and not always in classrooms,of which there are often many. This project will evaluate the basic benefits and costs of implementing a more comprehensive recycling program, and recommend how other

Language Evolution, Metasyntactically

NARCIS (Netherlands)

V. Zaytsev (Vadim); F. Hermann; J. Voigtländer

2012-01-01

htmlabstractCurrently existing syntactic definitions employ many different notations (usually dialects of EBNF) with slight deviations among them, which prevent efficient automated processing. When changes in such notation are required either due to maintenance activities such as correction or

Aquatic Species Program Review: Proceedings of the March 1983 Principal Investigators Meeting

Energy Technology Data Exchange (ETDEWEB)

1983-06-01

The Aquatic Species Program (ASP) addresses the utilization of plant biomass that naturally occurs in wetland or submerged areas. Processes are being developed through this program to make use of such aquatic species, capitalizing on their inherent capacity for rapid growth as well as their extraordinary chemical compositions.

"Embarrassingly White": Faculty Racial Disparities in American Recreation, Park, and Tourism Programs

Science.gov (United States)

Mowatt, Rasul A.; Johnson, Corey W.; Roberts, Nina S.; Kivel, B. Dana

2016-01-01

The recruitment and retention of faculty and students of color is a long-standing challenge in academic programs focusing on leisure studies, parks, recreation, and tourism. However, when confronting the predominantly white composition of educational programs, many evade or, at most, acknowledge the situation as a "deficit." Few offer…

Tensile and Flexural Test on Kenaf Hybrid Composites

Science.gov (United States)

Salleh, Z.; Yunus, S.; Masdek, N. R. N. M.; Taib, Y. M.; Azhar, I. I. S.; Hyie, K. M.

2018-03-01

The widely use of synthetic materials like carbon and fiberglass in various industries such as automotive and aircraft has lead to human health and environment problems. Therefore, the use of natural fibres such as kenaf has received higher attention as reinforcement. Kenaf or the scientific name is Hibiscus Cannabinus. L is one of the group of Malvecea plant which in the early days, the application of kenaf served only rope and canvas. However, it has more advantages than synthetic materials such as; widely availaible, renewable, lightweight, non-abbrasiveness during processing, high specific strength, free from health hazard and biodegradeable. This study was carried out to investigate the effects of different arrangement of kenaf and fiberglass composites on Young’s Modulus. The material composite was hardened with polyester resin and their properties was characterized. The tensile and the flexural properties is determined using an Instron universal tensile testing machine and carried out by following ASTM D3039 for tensile and ASTM D790 for a flexural test. The experimental program was designed to correlate the flexural and tensile Young’s Modulus of kenaf and fiberglass composite under the same load condition but different arrangement of kenaf and fiberglass on the mold . The resistance to change in shape was described by the behavior and characteristic of the composite materials. The stiffness or the elastic modulus of the composite material was determined at the end of the experiment. The results obtained show that the [±90FG/0/90/90/0/±90FG] kenaf/fiberglass composite arrangement has the highest elastic value.

Modeling biochemical transformation processes and information processing with Narrator.

Science.gov (United States)

Mandel, Johannes J; Fuss, Hendrik; Palfreyman, Niall M; Dubitzky, Werner

2007-03-27

Software tools that model and simulate the dynamics of biological processes and systems are becoming increasingly important. Some of these tools offer sophisticated graphical user interfaces (GUIs), which greatly enhance their acceptance by users. Such GUIs are based on symbolic or graphical notations used to describe, interact and communicate the developed models. Typically, these graphical notations are geared towards conventional biochemical pathway diagrams. They permit the user to represent the transport and transformation of chemical species and to define inhibitory and stimulatory dependencies. A critical weakness of existing tools is their lack of supporting an integrative representation of transport, transformation as well as biological information processing. Narrator is a software tool facilitating the development and simulation of biological systems as Co-dependence models. The Co-dependence Methodology complements the representation of species transport and transformation together with an explicit mechanism to express biological information processing. Thus, Co-dependence models explicitly capture, for instance, signal processing structures and the influence of exogenous factors or events affecting certain parts of a biological system or process. This combined set of features provides the system biologist with a powerful tool to describe and explore the dynamics of life phenomena. Narrator's GUI is based on an expressive graphical notation which forms an integral part of the Co-dependence Methodology. Behind the user-friendly GUI, Narrator hides a flexible feature which makes it relatively easy to map models defined via the graphical notation to mathematical formalisms and languages such as ordinary differential equations, the Systems Biology Markup Language or Gillespie's direct method. This powerful feature facilitates reuse, interoperability and conceptual model development. Narrator is a flexible and intuitive systems biology tool. It is

Gut microbiota composition may relate to weight loss rate in obese pet dogs

DEFF Research Database (Denmark)

Kieler, Ida Nordang; Kamal, Shamrulazhar; Vitger, Anne Désiré

2017-01-01

Obese dogs seem to have a different gut microbiome (GM) composition compared to lean dogs, and in humans, GM composition may negatively impact the ability to lose weight in some individuals. The purpose of this study was to investigate the interaction between exercise, weight-loss and the composi......Obese dogs seem to have a different gut microbiome (GM) composition compared to lean dogs, and in humans, GM composition may negatively impact the ability to lose weight in some individuals. The purpose of this study was to investigate the interaction between exercise, weight......-loss and the composition of GM in dogs. Eighteen obese pet dogs were recruited for a 12-week weight-loss intervention. All dogs were fed restrictively with a commercial high-protein/high-fibre dry diet, and eight of these dogs were enrolled in an exercise program in addition to the diet intervention. Faecal samples were...

A Model of Computation for Bit-Level Concurrent Computing and Programming: APEC

Science.gov (United States)

Ajiro, Takashi; Tsuchida, Kensei

A concurrent model of computation and a language based on the model for bit-level operation are useful for developing asynchronous and concurrent programs compositionally, which frequently use bit-level operations. Some examples are programs for video games, hardware emulation (including virtual machines), and signal processing. However, few models and languages are optimized and oriented to bit-level concurrent computation. We previously developed a visual programming language called A-BITS for bit-level concurrent programming. The language is based on a dataflow-like model that computes using processes that provide serial bit-level operations and FIFO buffers connected to them. It can express bit-level computation naturally and develop compositionally. We then devised a concurrent computation model called APEC (Asynchronous Program Elements Connection) for bit-level concurrent computation. This model enables precise and formal expression of the process of computation, and a notion of primitive program elements for controlling and operating can be expressed synthetically. Specifically, the model is based on a notion of uniform primitive processes, called primitives, that have three terminals and four ordered rules at most, as well as on bidirectional communication using vehicles called carriers. A new notion is that a carrier moving between two terminals can briefly express some kinds of computation such as synchronization and bidirectional communication. The model's properties make it most applicable to bit-level computation compositionally, since the uniform computation elements are enough to develop components that have practical functionality. Through future application of the model, our research may enable further research on a base model of fine-grain parallel computer architecture, since the model is suitable for expressing massive concurrency by a network of primitives.

Statistical data for the tensile properties of natural fibre composites

Directory of Open Access Journals (Sweden)

J.P. Torres

2017-06-01

Full Text Available This article features a large statistical database on the tensile properties of natural fibre reinforced composite laminates. The data presented here corresponds to a comprehensive experimental testing program of several composite systems including: different material constituents (epoxy and vinyl ester resins; flax, jute and carbon fibres, different fibre configurations (short-fibre mats, unidirectional, and plain, twill and satin woven fabrics and different fibre orientations (0°, 90°, and [0,90] angle plies. For each material, ~50 specimens were tested under uniaxial tensile loading. Here, we provide the complete set of stress–strain curves together with the statistical distributions of their calculated elastic modulus, strength and failure strain. The data is also provided as support material for the research article: “The mechanical properties of natural fibre composite laminates: A statistical study” [1].

A Strategy for Efficiently Verifying Requirements Specifications Using Composition and Invariants

Science.gov (United States)

2003-09-05

Colle - sur - Loup , France, Oct. 1984. Springer-Verlag. [34] J. Ramish. Empirical studies of compositional abstraction. Technical report, Naval Research...global to modular temporal rea- soning about programs. In K. R. Apt, editor, Proc. NATO Adv. Study Inst. on Logics and Models of Concurrent Systems, La

Addition to the Lewis Chemical Equilibrium Program to allow computation from coal composition data

Science.gov (United States)

Sevigny, R.

1980-01-01

Changes made to the Coal Gasification Project are reported. The program was developed by equilibrium combustion in rocket engines. It can be applied directly to the entrained flow coal gasification process. The particular problem addressed is the reduction of the coal data into a form suitable to the program, since the manual process is involved and error prone. A similar problem in relating the normal output of the program to parameters meaningful to the coal gasification process is also addressed.

Volumetric composition in composites and historical data

DEFF Research Database (Denmark)

Lilholt, Hans; Madsen, Bo

2013-01-01

The obtainable volumetric composition in composites is of importance for the prediction of mechanical and physical properties, and in particular to assess the best possible (normally the highest) values for these properties. The volumetric model for the composition of (fibrous) composites gives...... guidance to the optimal combination of fibre content, matrix content and porosity content, in order to achieve the best obtainable properties. Several composite materials systems have been shown to be handleable with this model. An extensive series of experimental data for the system of cellulose fibres...... and polymer (resin) was produced in 1942 – 1944, and these data have been (re-)analysed by the volumetric composition model, and the property values for density, stiffness and strength have been evaluated. Good agreement has been obtained and some further observations have been extracted from the analysis....

Complete Subsurface Elemental Composition Measurements With PING

Science.gov (United States)

Parsons, A. M.

2012-01-01

The Probing In situ with Neutrons and Gamma rays (PING) instrument will measure the complete bulk elemental composition of the subsurface of Mars as well as any other solid planetary body. PING can thus be a highly effective tool for both detailed local geochemistry science investigations and precision measurements of Mars subsurface reSOurces in preparation for future human exploration. As such, PING is thus fully capable of meeting a majority of both ncar and far term elements in Challenge #1 presented for this conference. Measuring the ncar subsurface composition of Mars will enable many of the MEPAG science goals and will be key to filling an important Strategic Knowledge Gap with regard to In situ Resources Utilization (ISRU) needs for human exploration. [1, 2] PING will thus fill an important niche in the Mars Exploration Program.

Composition

DEFF Research Database (Denmark)

Bergstrøm-Nielsen, Carl

2011-01-01

Strategies are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them in full...

Synopsis of the temporal variation of particulate matter composition and size.

Science.gov (United States)

Demerjian, Kenneth L; Mohnen, Volker A

2008-02-01

A synopsis of the detailed temporal variation of the size and number distribution of particulate matter (PM) and its chemical composition on the basis of measurements performed by several regional research consortia funded by the U.S. Environmental Protection Agency (EPA) PM Supersite Program is presented. This program deployed and evaluated a variety of research and emerging commercial measurement technologies to investigate the physical and chemical properties of atmospheric aerosols at a level of detail never before achieved. Most notably these studies demonstrated that systematic size-segregated measurements of mass, number, and associated chemical composition of the fine (PM2.5) and ultrafine (PM0.1) fraction of ambient aerosol with a time resolution down to minutes and less is achievable. A wealth of new information on the temporal variation of aerosol has been added to the existing knowledge pool that can be mined to resolve outstanding research and policy-related questions. This paper explores the nature of temporal variations (on time scales from several minutes to hours) in the chemical and physical properties of PM and its implications in the identification of PM formation processes, and source attribution (primary versus secondary), the contribution of local versus transported PM and the development of effective PM control strategies. The PM Supersite results summarized indicate that location, time of day, and season significantly influence not only the mass and chemical composition but also the size-resolved chemical/elemental composition of PM. Ambient measurements also show that ultrafine particles have different compositions and make up only a small portion of the PM mass concentration compared with inhalable coarse and fine particles, but their number concentration is significantly larger than their coarse or fine counterparts. PM size classes show differences in the relative amounts of nitrates, sulfates, crustal materials, and most especially

Composition

DEFF Research Database (Denmark)

2014-01-01

Memory Pieces are open compositions to be realised solo by an improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them...

On the Mechanical Behavior of Advanced Composite Material Structures

Science.gov (United States)

Vinson, Jack

During the period between 1993 and 2004, the author, as well as some colleagues and graduate students, had the honor to be supported by the Office of Naval Research to conduct research in several aspects of the behavior of structures composed of composite materials. The topics involved in this research program were numerous, but all contributed to increasing the understanding of how various structures that are useful for marine applications behaved. More specifically, the research topics focused on the reaction of structures that were made of fiber reinforced polymer matrix composites when subjected to various loads and environmental conditions. This included the behavior of beam, plate/panel and shell structures. It involved studies that are applicable to fiberglass, graphite/carbon and Kevlar fibers imbedded in epoxy, polyester and other polymeric matrices. Unidirectional, cross-ply, angle ply, and woven composites were involved, both in laminated, monocoque as well as in sandwich constructions. Mid-plane symmetric as well as asymmetric laminates were studied, the latter involving bending-stretching coupling and other couplings that only can be achieved with advanced composite materials. The composite structures studied involved static loads, dynamic loading, shock loading as well as thermal and hygrothermal environments. One major consideration was determining the mechanical properties of composite materials subjected to high strain rates because the mechanical properties vary so significantly as the strain rate increases. A considerable number of references are cited for further reading and study for those interested.

Multidimension Treatment Foster Care

DEFF Research Database (Denmark)

Pontoppidan, Maiken; Hansen, Helle; Deding, Mette

2014-01-01

Dette notat er en kort opsamling af den nyeste forskning af effekterne af Multidimension Treatment Foster Care (herefter MTFC). SFI lavede i 2010 en oversigt over forskningen om effekterne af MTFC i forbindelse med udarbejdelsen af en projektbeskrivelse. Dette notat sammenfatter den nyeste...

Thermal behavior of La2O3/Nio composite prepared by sol-gel method

International Nuclear Information System (INIS)

Sakallioglu, M.

2005-01-01

The La 2 O 3 /NiO composite was prepared by sol-gel method by using transition metal oxides (La 2 O 3 /NiO). The variation of specific heat capacity Cp with temperature for La2O3/NiO composite was investigated by DSC. The heat capacity curve was taken with a heating rate of 20 degrees/min between 0-100 degrees. The variation of specific heat capacity was found by PKI Muse Standard Analysis Program. The thermal stability of the La 2 O 3 /NiO composite was investigated by thermogravimetric analysis (TG) in air atmosphere at a heating rate of 20 degrees/min. The weight loss of La 2 O 3 /NiO composite was determined by the variation of temperature

Automated x-ray inspection of composites at northrop aircraft

International Nuclear Information System (INIS)

Murphy, W.J. Jr.; Nutter, R.L.; Patricelli, F.

1985-01-01

The Northrop automated x-ray inspection system (AXIS) has evolved from a research and development program initiated in 1981 to reduce increasing inspection costs; and reduce inspection times to stay abreast with increasing F/A-18A production. The goal of the program was to develop an automated production system that would meet existing inspection requirements; automate handling and alignment; and replace film for the inspection of F/A-18A composite assemblies and laminates. Originally, the program was supported completely by Northrop internal finding. However in 1984 it became part of the Navy Industrial Modernization Incentive Program (IMIP) with joint funding. The program was selected by the Navy because of its great potential to reduce and stabilize costs associated with F/A-18A inspections. Currently the AXIS is in the last stage of development with final integration expected by the end of July 1985 and production implementation by the end of the year. This paper briefly describes the equipment, and operation of the AXIS. Slides will be presented at the conference which will further illustrate the system; including inspection results

Tensor analysis and elementary differential geometry for physicists and engineers

CERN Document Server

Nguyen-Schäfer, Hung

2017-01-01

This book comprehensively presents topics, such as Dirac notation, tensor analysis, elementary differential geometry of moving surfaces, and k-differential forms. Additionally, two new chapters of Cartan differential forms and Dirac and tensor notations in quantum mechanics are added to this second edition. The reader is provided with hands-on calculations and worked-out examples at which he will learn how to handle the bra-ket notation, tensors, differential geometry, and differential forms; and to apply them to the physical and engineering world. Many methods and applications are given in CFD, continuum mechanics, electrodynamics in special relativity, cosmology in the Minkowski four-dimensional spacetime, and relativistic and non-relativistic quantum mechanics. Tensors, differential geometry, differential forms, and Dirac notation are very useful advanced mathematical tools in many fields of modern physics and computational engineering. They are involved in special and general relativity physics, quantum m...

Mechanical and thermophysical properties of graphite/polyimide composite materials

Science.gov (United States)

Rummler, D. R.; Clark, R. K.

1979-01-01

An on-going program to characterize advanced composites for up to 50,000 hours of exposure to simulated supersonic cruise environments is summarized. Results are presented for up to 25,000 hours of thermal exposure and 10,000 hours of flight simulation at temperatures up to 560K (550 F) with emphasis on HTS/710 graphite/polyimide composite material. Results to date indicate that the maximum use temperature for HTS/710 may be reduced to 505K (450 F) for long-time (1000 hours) application such as the supersonic transport. Preliminary thermophysical properties data for HTS/PMR15 graphite/polyimide were generated. These data include thermal conductivity, thermal expansion, and specific heat from 115K (-252 F) to 590K (600 F) and emittance at room temperature and 590K (600 F). The purpose in generating these data was to validate use of state-of-the-art property measurement methods for advanced graphite fiber reinforced resin matrix composites. Based on results to this point, thermal expansion measurements for composites are most difficult to perform. A high degree of caution in conducting thermal expansion tests and analyzing results is required to produce reliable data.

Composite slab behavior and strength analysis under static and dynamic loads

Directory of Open Access Journals (Sweden)

Florin Radu HARIGA

2012-07-01

Full Text Available Steel-framed buildings are typically constructed using steel-deck-reinforced concrete floor slabs. The in-plane (or diaphragm strength and stiffness of the floor system are frequently utilized in the lateral load-resisting system design. This paper presents the results of an experimental research program in which four full size composite diaphragms were vertically loaded to the limit state, under static or dynamic loads. Two test specimens were provided with longitudinal steel-deck ribs, and the other two specimens with cross steel-deck ribs. Typical composite diaphragm limit states are described, and the controlling limit state for each of the full size tests is indicated. The interaction effects between the reinforced concrete slab and the steel girder on the composite slab strength and stiffness were mainly studied.

Stress wave calculations in composite plates using the fast Fourier transform.

Science.gov (United States)

Moon, F. C.

1973-01-01

The protection of composite turbine fan blades against impact forces has prompted the study of dynamic stresses in composites due to transient loads. The mathematical model treats the laminated plate as an equivalent anisotropic material. The use of Mindlin's approximate theory of crystal plates results in five two-dimensional stress waves. Three of the waves are flexural and two involve in-plane extensional strains. The initial value problem due to a transient distributed transverse force on the plate is solved using Laplace and Fourier transforms. A fast computer program for inverting the two-dimensional Fourier transform is used. Stress contours for various stresses and times after application of load are obtained for a graphite fiber-epoxy matrix composite plate. Results indicate that the points of maximum stress travel along the fiber directions.

An Achievement Degree Analysis Approach to Identifying Learning Problems in Object-Oriented Programming

Science.gov (United States)

Allinjawi, Arwa A.; Al-Nuaim, Hana A.; Krause, Paul

2014-01-01

Students often face difficulties while learning object-oriented programming (OOP) concepts. Many papers have presented various assessment methods for diagnosing learning problems to improve the teaching of programming in computer science (CS) higher education. The research presented in this article illustrates that although max-min composition is…

32 CFR 310.9 - Privacy boards and office, composition and responsibilities.

Science.gov (United States)

2010-07-01

... involving the DoD Privacy Program, meeting as necessary, to address issues of common concern so as to ensure... privacy issues relating to the Department's collection, maintenance, use, or dissemination of personal... 32 National Defense 2 2010-07-01 2010-07-01 false Privacy boards and office, composition and...

Current status and recent research achievements in SiC/SiC composites

Energy Technology Data Exchange (ETDEWEB)

Katoh, Y., E-mail: katohy@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Snead, L.L. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Henager, C.H. [Pacific Northwest National Laboratory, Richland, WA (United States); Nozawa, T. [Japan Atomic Energy Agency, Rokkasho, Aomori (Japan); Hinoki, T. [Institute of Advanced Energy, Kyoto University, Kyoto (Japan); Iveković, A.; Novak, S. [Jožef Stefan Institute, Ljubljana (Slovenia); Gonzalez de Vicente, S.M. [EFDA Close Support Unit, Garching (Germany)

2014-12-15

The silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite system for fusion applications has seen a continual evolution from development a fundamental understanding of the material system and its behavior in a hostile irradiation environment to the current effort which is directed at a broad-based program of technology maturation program. In essence, over the past few decades this material system has steadily moved from a laboratory curiosity to an engineering material, both for fusion structural applications and other high performance application such as aerospace. This paper outlines the recent international scientific and technological achievements towards the development of SiC/SiC composite material technologies for fusion application and discusses future research directions. It also reviews the materials system in the larger context of progress to maturity as an engineering material for both the larger nuclear community and broader engineering applications.

Current status and recent research achievements in SiC/SiC composites

International Nuclear Information System (INIS)

Katoh, Y.; Snead, L.L.; Henager, C.H.; Nozawa, T.; Hinoki, T.; Iveković, A.; Novak, S.; Gonzalez de Vicente, S.M.

2014-01-01

The silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite system for fusion applications has seen a continual evolution from development a fundamental understanding of the material system and its behavior in a hostile irradiation environment to the current effort which is directed at a broad-based program of technology maturation program. In essence, over the past few decades this material system has steadily moved from a laboratory curiosity to an engineering material, both for fusion structural applications and other high performance application such as aerospace. This paper outlines the recent international scientific and technological achievements towards the development of SiC/SiC composite material technologies for fusion application and discusses future research directions. It also reviews the materials system in the larger context of progress to maturity as an engineering material for both the larger nuclear community and broader engineering applications

Current status and recent research achievements in SiC/SiC composites

Science.gov (United States)

Katoh, Y.; Snead, L. L.; Henager, C. H.; Nozawa, T.; Hinoki, T.; Iveković, A.; Novak, S.; Gonzalez de Vicente, S. M.

2014-12-01

The silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite system for fusion applications has seen a continual evolution from development a fundamental understanding of the material system and its behavior in a hostile irradiation environment to the current effort which is directed at a broad-based program of technology maturation program. In essence, over the past few decades this material system has steadily moved from a laboratory curiosity to an engineering material, both for fusion structural applications and other high performance application such as aerospace. This paper outlines the recent international scientific and technological achievements towards the development of SiC/SiC composite material technologies for fusion application and discusses future research directions. It also reviews the materials system in the larger context of progress to maturity as an engineering material for both the larger nuclear community and broader engineering applications.

Mechanical Behavior of Polymer Nano Bio Composite for Orthopedic Implants

Science.gov (United States)

Marimuthu, K., Dr.; Rajan, Sankar

2018-04-01

The bio-based polymer composites have been the focus of many scientific and research projects, as well as many commercial programs. In recent years, scientists and engineers have been working together to use the inherent strength and performance of the new class of bio-based composites which is compactable with human body and can act as a substitute for living cells. In this stage the polymer composites also stepped into human bone implants as a replacement for metallic implants which was problems like corrosion resistance and high cost. The polymer composite have the advantage that it can be molded to the required shape, the polymers have high corrosion resistance, less weight and low cost. The aim of this research is to develop and analyze the suitable bio compactable polymer composite for human implants. The nano particles reinforced polymer composites provides good mechanical properties and shows good tribological properties especially in the total hip and knee replacements. The graphene oxide powders are bio compactable and acts as anti biotic. GO nano powder where reinforced into High-density polyethylene in various weight percentage of 0.5% to 2%. The performance of GO nano powder shows better tribological properties. The material produced does not cause any pollution to the environment and at the same time it can be bio compactable and sustainable. The product will act environmentally friendly.

Healable Composites

Science.gov (United States)

2012-03-28

oriented fibers and healable polymer matrix 4. Laminate pre-preg layers to form composite panels with minimal voids & defects 5. Characterize the...composites: determine mechanical and crack healing properties (4, 5) Composite (3) Prepreg (2) Polymer (1) Furan (1) Maleimide Healable Composites...Develop pre-preg system of oriented fibers and healable polymer matrix 4. Laminate pre-preg layers to form composite panels with minimal voids & defects

A visual basic program to generate sediment grain-size statistics and to extrapolate particle distributions

Science.gov (United States)

Poppe, L.J.; Eliason, A.H.; Hastings, M.E.

2004-01-01

Visual Basic 6.0 and provides a window to facilitate program execution. The input for the sediment fractions is weight percentages in whole-phi notation (Krumbein, 1934; Inman, 1952), and the program permits the user to select output in either method of moments or inclusive graphics statistics (Fig. 1). Users select options primarily with mouse-click events, or through interactive dialogue boxes.