WorldWideScience

Sample records for program components including

  1. Pilot monitoring program: geologic input for the hillslope component (includes a discussion of Caspar Creek geology and geomorphology)

    Science.gov (United States)

    T. E. Spittler

    1995-01-01

    The California Department of Conservation, Division of Mines and Geology (DMG) is submitting this report and accompanying maps to the California Department of Forestry and Fire Protection (CDF) to fulfill Interagency Agreement number 8CA38400, Pilot Monitoring Program -- Geologic Input for the Hillslope Component. Under this agreement, DMG has assisted CDF in the...

  2. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  3. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  4. Programs, interfaces and components

    NARCIS (Netherlands)

    Bergstra, J.A.; Loots, M.E.

    The jump instruction is considered essential for an adequate theoretical understanding of imperative sequential programming. Using atomic actions and tests as a basis we outline an algebra of programs, denoted PGA, which captures the crux of sequential programming. PGA provides an ontology for

  5. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  6. Education Program on Fossil Resources Including Coal

    Science.gov (United States)

    Usami, Masahiro

    Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

  7. CoC Awards by Program Component

    Data.gov (United States)

    Department of Housing and Urban Development — CoC Awards by Program Component reports provide snapshots of award data broken down by eligible program component types for the year selected. The reports, which can...

  8. Component-Oriented Programming (WCOP 2004)

    NARCIS (Netherlands)

    Bosch, J.; Szyperski, C.; Weck, W.; Malenfant, J; Ostvold, BM

    2004-01-01

    This report covers the ninth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  9. Components of cultural competence in three mental health programs.

    Science.gov (United States)

    Siegel, Carole; Haugland, Gary; Reid-Rose, Lenora; Hopper, Kim

    2011-06-01

    The aim of this study was to identify components of cultural competence in mental health programs developed for cultural groups by community and mental health professionals from these groups. Three programs were studied: a prevention program primarily serving African-American and Afro-Caribbean youth, a Latino adult acute inpatient unit, and a Chinese day treatment program in a community-based agency. Nine study-trained field researchers used a semistructured instrument that captures program genealogy, structure, processes, and cultural infusion. Program cultural elements were identified from field notes and from individual and group interviews of consumers and staff (N=104). A research-group consensus process with feedback from program staff was used to group elements by shared characteristics into the program components of cultural competence. Components included communication competencies (with use of colloquialisms and accepted forms of address); staff in culturally acceptable roles; culturally framed trust building (such as pairing youths with mentors), stigma reduction, friendly milieus (such as serving culturally familiar foods and playing music popular with the culture), and services; and peer, family, and community involvement (including use of peer counselors and mentors, hosting parent weekends, and linking clients with senior center and community services). Incorporating these components into any program in which underserved cultural populations are seen is recommended for improving cultural competence.

  10. 77 FR 6463 - Revisions to Labeling Requirements for Blood and Blood Components, Including Source Plasma...

    Science.gov (United States)

    2012-02-08

    ... Blood Components, Including Source Plasma; Correction AGENCY: Food and Drug Administration, HHS. ACTION..., Including Source Plasma,'' which provided incorrect publication information regarding a 60-day notice that...

  11. 24 CFR 585.3 - Program components.

    Science.gov (United States)

    2010-04-01

    ... apprenticeship programs where possible. (b) Leadership training, counseling and other support activities, including: (1) Activities designed to develop employment and leadership skills, including support for youth councils; (2) Counseling services to assist trainees in personal, health, housing, child care, family or...

  12. Higher-Order Components for Grid Programming

    CERN Document Server

    Dünnweber, Jan

    2009-01-01

    Higher-Order Components were developed within the CoreGRID European Network of Excellence and have become an optional extension of the popular Globus middleware. This book provides the reader with hands-on experience, describing a collection of example applications from various fields of science and engineering, including biology and physics.

  13. Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

    Directory of Open Access Journals (Sweden)

    Bryanna Hahn Fox

    2012-12-01

    Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

  14. Human reliability program: Components and effects

    International Nuclear Information System (INIS)

    Baley-Downes, S.

    1986-01-01

    The term ''Human Reliability Program'' (HRP) is defined as a series of selective controls which are implemented and integrated to identify the ''insider threat'' from current and prospective employees who are dishonest, disloyal and unreliable. The HRP, although not a prediction of human behaviour, is an excellent tool for decision making and should compliment security and improve employee quality. The HRP consists of several component applications such as management evaluation; appropriate background investigative requirements; occupational health examination and laboratory testing; drug/alcohol screening; psychological testing and interviews; polygraph examination; job related aberrant behaviour recognition; on-going education and training; document control; drug/alcohol rehabilitation; periodic HRP audit; and implementation of an onsite central clearing house. The components and effects of HRP are discussed in further detail in this paper

  15. 78 FR 34132 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-06-06

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2958] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Correction to Notice of Receipt of Complaint; Solicitation... of complaint entitled Certain Portable Electronic Communications Devices, Including Mobile Phones and...

  16. 77 FR 27078 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2012-05-08

    ... Phones and Tablet Computers, and Components Thereof; Notice of Receipt of Complaint; Solicitation of... entitled Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof... the United States after importation of certain electronic devices, including mobile phones and tablet...

  17. Turbomachine combustor nozzle including a monolithic nozzle component and method of forming the same

    Science.gov (United States)

    Stoia, Lucas John; Melton, Patrick Benedict; Johnson, Thomas Edward; Stevenson, Christian Xavier; Vanselow, John Drake; Westmoreland, James Harold

    2016-02-23

    A turbomachine combustor nozzle includes a monolithic nozzle component having a plate element and a plurality of nozzle elements. Each of the plurality of nozzle elements includes a first end extending from the plate element to a second end. The plate element and plurality of nozzle elements are formed as a unitary component. A plate member is joined with the nozzle component. The plate member includes an outer edge that defines first and second surfaces and a plurality of openings extending between the first and second surfaces. The plurality of openings are configured and disposed to register with and receive the second end of corresponding ones of the plurality of nozzle elements.

  18. 77 FR 34063 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2012-06-08

    ... Phones and Tablet Computers, and Components Thereof Institution of Investigation AGENCY: U.S... the United States after importation of certain electronic devices, including mobile phones and tablet... mobile phones and tablet computers, and components thereof that infringe one or more of claims 1-3 and 5...

  19. Health insurers promoting employee wellness: strategies, program components and results.

    Science.gov (United States)

    Murphy, Brigid M; Schoenman, Julie A; Pirani, Hafiza

    2010-01-01

    To examine health insurance companies' role in employee wellness. Case studies of eight insurers. Wellness activities in work, clinical, online, and telephonic settings. Senior executives and wellness program leaders from Blue Cross Blue Shield health insurers and from one wellness organization. Telephone interviews with 20 informants. Health insurers were engaged in wellness as part of their mission to promote health and reduce health care costs. Program components included the following: education, health risk assessments, incentives, coaching, environmental consultation, targeted programming, onsite biometric screening, professional support, and full-time wellness staff. Programs relied almost exclusively on positive incentives to encourage participation. Results included participation rates as high as 90%, return on investment ranging from $1.09 to $1.65, and improved health outcomes. Health insurers have expertise in developing, implementing, and marketing health programs and have wide access to employers and their employees' health data. These capabilities make health insurers particularly well equipped to expand the reach of wellness programming to improve the health of many Americans. By coupling members' medical data with wellness-program data, health insurers can better understand an individual's health status to develop and deliver targeted interventions. Through program evaluation, health insurers can also contribute to the limited but growing evidence base on employee wellness programs.

  20. Selection Component Analysis of Natural Polymorphisms using Population Samples Including Mother-Offspring Combinations, II

    DEFF Research Database (Denmark)

    Jarmer, Hanne Østergaard; Christiansen, Freddy Bugge

    1981-01-01

    Population samples including mother-offspring combinations provide information on the selection components: zygotic selection, sexual selection, gametic seletion and fecundity selection, on the mating pattern, and on the deviation from linkage equilibrium among the loci studied. The theory...

  1. A technique of including the effect of aging of passive components in probabilistic risk assessments

    International Nuclear Information System (INIS)

    Phillips, J.H.; Weidenhamer, G.H.

    1992-01-01

    The probabilistic risk assessments (PRAS) being developed at most nuclear power plants to calculate the risk of core damage generally focus on the possible failure of active components. The possible failure of passive components is given little consideration. We are developing methods for selecting risk-significant passive components and including them in PRAS. These methods provide effective ways to prioritize passive components for inspection, and where inspection reveals aging damage, mitigation or repair can be employed to reduce the likelihood of component failure. We demonstrated a method by selecting a weld in the auxiliary feedwater (AFW) system, basing our selection on expert judgement of the likelihood of failure and on an estimate of the consequence of component failure to plant safety. We then modified and used the Piping Reliability Analysis Including Seismic Events (PRAISE) computer code to perform a probabilistic structural analysis to calculate the probability that crack growth due to aging would cause the weld to fail. The PRAISE code was modified to include the effects of changing design material properties with age and changing stress cycles. The calculation included the effects of mechanical loads and thermal transients typical of the service loads for this piping design and the effects of thermal cycling caused by a leaking check valve. However, this particular calculation showed little change in low component failure probability and plant risk for 48 years of service. However, sensitivity studies showed that if the probability of component failure is high, the effect on plant risk is significant. The success of this demonstration shows that this method could be applied to nuclear power plants. The demonstration showed the method is too involved (PRAISE takes a long time to perform the calculation and the input information is extensive) for handling a large number of passive components and therefore simpler methods are needed

  2. School lunch program in India: background, objectives and components.

    Science.gov (United States)

    Chutani, Alka Mohan

    2012-01-01

    The School Lunch Program in India (SLP) is the largest food and nutrition assistance program feeding millions of children every day. This paper provides a review of the background information on the SLP in India earlier known as national program for nutrition support to primary education (NP-NSPE) and later as mid day meal scheme, including historical trends and objectives and components/characteristics of the scheme. It also addresses steps being taken to meet challenges being faced by the administrators of the program in monitoring and evaluation of the program. This program was initially started in 1960 in few states to overcome the complex problems malnutrition and illiteracy. Mid Day Meal Scheme is the popular name for school meal program. In 2001, as per the supreme court orders, it became mandatory to give a mid day meal to all primary and later extended to upper primary school children studying in the government and government aided schools. This scheme benefitted 140 million children in government assisted schools across India in 2008, strengthening child nutrition and literacy. In a country with a large percent of illiterate population with a high percent of children unable to read or write; governmental and non-governmental organizations have reported that mid day meal scheme has consistently increased enrollment in schools in India. One of the main goals of school lunch program is to promote the health and well-being of the Nation's children.

  3. Manufacture of components for Canadian reactor programs

    International Nuclear Information System (INIS)

    Perry, L.P.

    Design features, especially those relating to calandrias, are pointed out for many CANDU-type reactors and the Taiwan research reactor. The special requirements shouldered by the Canadian suppliers of heavy reactor components are analyzed. (E.C.B.)

  4. Ageing management program for reactor components in HANARO

    International Nuclear Information System (INIS)

    Cho, Yeong-Garp; Wu, Sang-Ik; Lee, Jung-Hee; Ryu, Jeong-Soo; Park, Yong-Chul; Wu, Jong-Sup; Jun, Byung Jin

    2003-01-01

    The HANARO, an open-tank-in-pool type research reactor of 30MWth power in Korea, has operated for 8 years since its initial criticality in February of 1995. The reactor power has been gradually increased to 24 MWth through the service period. Therefore the reactor age is very young from the viewpoint of the ageing effect on the reactor structure and components by neutron irradiation considering the expected reactor lifetime. But, we have a few programs to manage the ageing from the aspect of design lifetime of reactor components. This paper summarizes the overall progress and plan for the ageing management for the reactor components including lifetime extension and design improvement, remote measurements and in-service inspections. The shutoff units and control absorber units have aged more rapidly than other structures or components because the number of rod drop cycles was higher than expected at the design stage. The system commissioning tests, periodic performance tests, and weekly operation for the stable supply of medical radioisotopes overriding the normal cycle operation have contributed to the high frequency of rod drop. Therefore, we have instituted a program to extend the lifetime of the shutoff units and the control absorber units. This program includes an endurance test to verify the performance for the extended number of drops and the management of shutdown methods to minimize the drop cycles for both the shutoff units and the control absorber units. The program also includes the design improvement of the damper mechanism of the control absorber units to reduce the impact force caused by rod drop. The inner shell of the reflector vessel surrounding the core is the most critical part from the viewpoint of neutron irradiation. The periodic measurement of the dimensional change in the vertical straightness of the inner shell is considered as one of the in-service inspections. We developed a few tools and verified the performance to measure the

  5. 78 FR 63492 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

    Science.gov (United States)

    2013-10-24

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-847] Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is...

  6. A review of the reliability analysis of LPRS including the components repairs

    International Nuclear Information System (INIS)

    Oliveira, L.F.S. de; Fleming, P.V.; Frutuoso e Melo, P.F.F.; Tayt-Sohn, L.C.

    1983-01-01

    The reliability analysis of low pressure recirculation system in its long-term recicurlation phase before 24hs is presented. The possibility of repairing the components out of the containment is included. A general revision of analysis of the short-term recirculation phase is done. (author) [pt

  7. 78 FR 56737 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-09-13

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an... on the Commission's electronic docket (EDIS) at http://edis.usitc.gov . Hearing-impaired persons are...

  8. 78 FR 49764 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-08-15

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review n... for this investigation may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc...

  9. 78 FR 72712 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-12-03

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an... this investigation may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov...

  10. Product costing program for wood component manufacturers

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

    2013-01-01

    Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

  11. Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

    Science.gov (United States)

    Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

    2004-01-01

    This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

  12. 34 CFR 200.28 - Schoolwide program components.

    Science.gov (United States)

    2010-07-01

    ... instructional program. (c) Parental involvement. (1) A schoolwide program must involve parents in the planning... 34 Education 1 2010-07-01 2010-07-01 false Schoolwide program components. 200.28 Section 200.28 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY...

  13. National Nanotechnology Initiative Investments by Agency and Program Component Area

    Data.gov (United States)

    Office of Science and Technology Policy, Executive Office of the President — Data represents National Nanotechnology Initiative investments by agency and program component area (PCA) from FY 2001 through FY 2010 (requested). While this data...

  14. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-01-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  15. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-11-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  16. MODELING OF SYSTEM COMPONENTS OF EDUCATIONAL PROGRAMS IN HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    E. K. Samerkhanova

    2016-01-01

    Full Text Available Based on the principles of System Studies, describes the components of the educational programs of the control system. Educational Program Management is a set of substantive, procedural, resource, subject-activity, efficiently and evaluation components, which ensures the integrity of integration processes at all levels of education. Ensuring stability and development in the management of educational programs is achieved by identifying and securing social norms, the status of the educational institution program managers to ensure the achievement of modern quality of education.Content Management provides the relevant educational content in accordance with the requirements of the educational and professional standards; process control ensures the efficient organization of rational distribution process flows; Resource Management provides optimal distribution of personnel, information and methodological, material and technical equipment of the educational program; contingent management provides subject-activity interaction of participants of the educational process; quality control ensures the quality of educational services.

  17. BSN Program Admittance Criteria: Should Emotional Intelligence Be Included?

    Science.gov (United States)

    Smith, Tanya

    2017-01-01

    Emotional intelligence refers to the ability to identify and monitor emotions and remain aware of how emotions affect thoughts and actions. Emotional intelligence has been discussed as a better predictor of personal and occupational success than performance on intellectual intelligence tests. Despite the importance of one's emotional intelligence, BSN (Bachelor of Science in Nursing) nursing schools routinely admit candidates based on the student's cumulative college course grade point average (GPA). Nursing is a profession that requires one's ability to empathize, care, and react in emotionally sound manners. Is the GPA enough to determine if a student will evolve into a professional nurse? This article will explore the routine admittance criteria for BSN nursing programs and propose the concept of using the emotional intelligence tool as an adjunct to the cumulative college course GPA. The emotional intelligence theory will be identified and applied to the nursing profession. © 2016 Wiley Periodicals, Inc.

  18. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    International Nuclear Information System (INIS)

    Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

    2013-01-01

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  19. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [Component Technology Global Unit Generation, E.ON Kernkraft GmbH, Hannover (Germany)

    2013-05-15

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  20. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

    Directory of Open Access Journals (Sweden)

    Luke Perraton

    2009-11-01

    Full Text Available Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS. The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery were analyzed.Results: Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery.Conclusions: Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%–80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.Keywords: hydrotherapy, fibromyalgia syndrome, exercise, effective, components

  1. 77 FR 7 - Revisions to Labeling Requirements for Blood and Blood Components, Including Source Plasma

    Science.gov (United States)

    2012-01-03

    ... uniform container label for blood and blood components and recommended labels that incorporated barcode... Protein Fraction (part 640, subpart I), and Immune Globulin (part 640, subpart J)). The comment noted that...

  2. Off-line programming and simulation in handling nuclear components

    International Nuclear Information System (INIS)

    Baker, C.P.

    1993-10-01

    IGRIP was used to create a simulation of the robotic workcell design for handling components at the PANTEX nuclear arms facility. This initial simulation identified problems with the customer's proposed worker layout, and allowed a correction to be proposed. Refinement of the IGRIP simulation allowed the design and construction of a workcell mock-up and accurate off-line programming of the system. IGRIP's off-line programming capabilities are being used to develop the motion control code for the workcell. PNLs success in this area suggests that simulation and off-line programming may be valuable tools for developing robotics in some automation resistant industries

  3. A classification of components of workplace disability management programs

    DEFF Research Database (Denmark)

    Gensby, U; Labriola, Merete; Irvin, E

    2014-01-01

    Purpose: This paper presents results from a Campbell systematic review on the nature and effectiveness of workplace disability management programs (WPDM) promoting return to work (RTW), as implemented and practiced by employers. A classification of WPDM program components, based on the review...... were conducted in pairs of reviewers. Studies were clustered around various dimensions of the design and context of programs. Results: 16,932 records were identified by the initial search. 599 papers were assessed for relevance. Thirteen studies met inclusion criteria. Twelve peer reviewed articles...

  4. Development of components for the gas-cooled fast breeder reactor program

    International Nuclear Information System (INIS)

    Dee, J.B.; Macken, T.

    1977-01-01

    The gas-cooled fast breeder reactor (GCFR) component development program is based on an extension of high temperature gas-cooled reactor (HTGR) component technology; therefore, the GCFR development program is addressed primarily to components which differ in design and requirements from HTGR components. The principal differences in primary system components are due to the increase in helium coolant pressure level, which benefits system size and efficiency in the GCFR, and differences in the reactor internals and fuel handling systems due to the use of the compact metal-clad core. The purpose of this paper is to present an overview of the principal component design differences between the GCFR and HTGR and the consequent influences of these differences on GCFR component development programs. Development program plans are discussed and include those for the prestressed concrete reactor vessel (PCRV), the main helium circulator and its supporting systems, the steam generators, the reactor thermal shielding, and the fuel handling system. Facility requirements to support these development programs are also discussed. Studies to date show that GCFR component development continues to appear to be incremental in nature, and the required tests are adaptations of related HTGR test programs. (Auth.)

  5. Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits

    Directory of Open Access Journals (Sweden)

    Sudhanshu Maheshwari

    2007-01-01

    Full Text Available This paper presents two new first-order voltage-mode all-pass filters using a single-current differencing buffered amplifier and four passive components. Each circuit is compatible to a current-controlled current differencing buffered amplifier with only two passive elements, thus resulting in two more circuits, which employ a capacitor, a resistor, and an active element, thus using a minimum of active and passive component counts. The proposed circuits possess low output impedance, and hence can be easily cascaded for voltage-mode systems. PSPICE simulation results are given to confirm the theory.

  6. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

    Science.gov (United States)

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-11-30

    Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

  7. Recommended Syllabus Components: What Do Higher Education Faculty Include in Their Syllabi?

    Science.gov (United States)

    Doolittle, Peter E.; Siudzinski, Robert A.

    2010-01-01

    Syllabus use in higher education instruction is ubiquitous, yet what actually constitutes a syllabus remains unclear. The authors assessed the contents of 1000 syllabi, sampled from the Internet, based on 26 criteria determined from a literature review of recommended syllabus components. Syllabi contents were assessed according to four categories:…

  8. Efficient and robust relaxation procedures for multi-component mixtures including phase transition

    International Nuclear Information System (INIS)

    Han, Ee; Hantke, Maren; Müller, Siegfried

    2017-01-01

    We consider a thermodynamic consistent multi-component model in multi-dimensions that is a generalization of the classical two-phase flow model of Baer and Nunziato. The exchange of mass, momentum and energy between the phases is described by additional source terms. Typically these terms are handled by relaxation procedures. Available relaxation procedures suffer from efficiency and robustness resulting in very costly computations that in general only allow for one-dimensional computations. Therefore we focus on the development of new efficient and robust numerical methods for relaxation processes. We derive exact procedures to determine mechanical and thermal equilibrium states. Further we introduce a novel iterative method to treat the mass transfer for a three component mixture. All new procedures can be extended to an arbitrary number of inert ideal gases. We prove existence, uniqueness and physical admissibility of the resulting states and convergence of our new procedures. Efficiency and robustness of the procedures are verified by means of numerical computations in one and two space dimensions. - Highlights: • We develop novel relaxation procedures for a generalized, thermodynamically consistent Baer–Nunziato type model. • Exact procedures for mechanical and thermal relaxation procedures avoid artificial parameters. • Existence, uniqueness and physical admissibility of the equilibrium states are proven for special mixtures. • A novel iterative method for mass transfer is introduced for a three component mixture providing a unique and admissible equilibrium state.

  9. PTAC: a computer program for pressure-transient analysis, including the effects of cavitation. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Kot, C A; Youngdahl, C K

    1978-09-01

    PTAC was developed to predict pressure transients in nuclear-power-plant piping systems in which the possibility of cavitation must be considered. The program performs linear or nonlinear fluid-hammer calculations, using a fixed-grid method-of-characteristics solution procedure. In addition to pipe friction and elasticity, the program can treat a variety of flow components, pipe junctions, and boundary conditions, including arbitrary pressure sources and a sodium/water reaction. Essential features of transient cavitation are modeled by a modified column-separation technique. Comparisons of calculated results with available experimental data, for a simple piping arrangement, show good agreement and provide validation of the computational cavitation model. Calculations for a variety of piping networks, containing either liquid sodium or water, demonstrate the versatility of PTAC and clearly show that neglecting cavitation leads to erroneous predictions of pressure-time histories.

  10. Understanding science teacher enhancement programs: Essential components and a model

    Science.gov (United States)

    Spiegel, Samuel Albert

    Researchers and practioners alike recognize that "the national goal that every child in the United States has access to high-quality school education in science and mathematics cannot be realized without the availability of effective professional development of teachers" (Hewson, 1997, p. 16). Further, there is a plethora of reports calling for the improvement of professional development efforts (Guskey & Huberman, 1995; Kyle, 1995; Loucks-Horsley, Hewson, Love, & Stiles, 1997). In this study I analyze a successful 3-year teacher enhancement program, one form of professional development, to: (1) identify essential components of an effective teacher enhancement program; and (2) create a model to identify and articulate the critical issues in designing, implementing, and evaluating teacher enhancement programs. Five primary sources of information were converted into data: (1) exit questionnaires, (2) exit surveys, (3) exit interview transcripts, (4) focus group transcripts, and (5) other artifacts. Additionally, a focus group was used to conduct member checks. Data were analyzed in an iterative process which led to the development of the list of essential components. The Components are categorized by three organizers: Structure (e.g., science research experience, a mediator throughout the program), Context (e.g., intensity, collaboration), and Participant Interpretation (e.g., perceived to be "safe" to examine personal beliefs and practices, actively engaged). The model is based on: (1) a 4-year study of a successful teacher enhancement program; (2) an analysis of professional development efforts reported in the literature; and (3) reflective discussions with implementors, evaluators, and participants of professional development programs. The model consists of three perspectives, cognitive, symbolic interaction, and organizational, representing different viewpoints from which to consider issues relevant to the success of a teacher enhancement program. These

  11. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [E.ON Kernkraft GmbH, Hannover (Germany). Component Technology

    2013-06-01

    The influence of LWR coolant environment to the lifetime of materials in nuclear power plants is being discussed internationally. Environmental phenomena had been investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures are discussed and recommendations are made how to avoid extremely conservative results. (orig.)

  12. Risk Management Program Application for the Component Test Capability

    International Nuclear Information System (INIS)

    Stephanie L. Austad; Jeffrey D. Bryan

    2009-01-01

    This paper documents the application of the risk management program requirements to Component Test Capability (CTC) Project activities for each CTC alternative. In particular, DOE O 413.3A, 'Program and Project Management for the Acquisition of Capital Assets,' and DOE G 413.3-7, 'Risk Management Guide for Project Management,' will apply in the event that Alternative 4, Single, Standalone Component Test Facility (CTF), is selected and approved. As such, it is advisable to begin planning to meet the associated Department of Energy (DOE) requirements and guidance as early in the acquisition process as practicable. This white paper is intended to assist in this planning and to support associated decision-making activities. Nontechnical risks associated with each alternative will be identified to support the Next Generation Nuclear Plant (NGNP) CTC alternatives analysis. Technical risks are assumed to be addressed through the Technology Development Risk Management modeling process and are inherent to the alternatives

  13. Java Decaffeinated: experiences building a programming language from components

    OpenAIRE

    Farragher, Linda; Dobson, Simon

    2000-01-01

    non-peer-reviewed Most modern programming languages are complex and feature rich. Whilst this is (sometimes) an advantage for industrial-strength applications, it complicates both language teaching and language research. We describe our experiences in the design of a reduced sub-set of the Java language and its implementation using the Vanilla language development framework. We argue that Vanilla???s component-based approach allows the language???s feature set to be varied quickly and simp...

  14. Components of Program for Analysis of Spectra and Their Testing

    Directory of Open Access Journals (Sweden)

    Ivan Taufer

    2013-11-01

    Full Text Available The spectral analysis of aqueous solutions of multi-component mixtures is used for identification and distinguishing of individual componentsin the mixture and subsequent determination of protonation constants and absorptivities of differently protonated particles in the solution in steadystate (Meloun and Havel 1985, (Leggett 1985. Apart from that also determined are the distribution diagrams, i.e. concentration proportions ofthe individual components at different pH values. The spectra are measured with various concentrations of the basic components (one or severalpolyvalent weak acids or bases and various pH values within the chosen range of wavelengths. The obtained absorbance response area has to beanalyzed by non-linear regression using specialized algorithms. These algorithms have to meet certain requirements concerning the possibility ofcalculations and the level of outputs. A typical example is the SQUAD(84 program, which was gradually modified and extended, see, e.g., (Melounet al. 1986, (Meloun et al. 2012.

  15. The data collection component of the Hanford Meteorology Monitoring Program

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, C.S.; Islam, M.M.

    1988-09-01

    An intensive program of meteorological monitoring is in place at the US Department of Energy's Hanford Site. The Hanford Meteorology Monitoring Program involves the measurement, observation, and storage of various meteorological data; continuous monitoring of regional weather conditions by a staff of professional meteorologists; and around-the-clock forecasting of weather conditions for the Hanford Site. The objective of this report is to document the data collection component of the program. In this report, each meteorological monitoring site is discussed in detail. Each site's location and instrumentation are described and photographs are presented. The methods for processing and communicating data to the Hanford Meteorology Station are also discussed. Finally, the procedures followed to maintain and calibrate these instruments are presented. 2 refs., 83 figs., 15 tabs.

  16. A Component-Oriented Programming for Embedded Mobile Robot Software

    Directory of Open Access Journals (Sweden)

    Safaai Deris

    2008-11-01

    Full Text Available Applying software reuse to many Embedded Real-Time (ERT systems poses significant challenges to industrial software processes due to the resource-constrained and real-time requirements of the systems. Autonomous Mobile Robot (AMR system is a class of ERT systems, hence, inherits the challenge of applying software reuse in general ERT systems. Furthermore, software reuse in AMR systems is challenged by the diversities in terms of robot physical size and shape, environmental interaction and implementation platform. Thus, it is envisioned that component-based software engineering will be the suitable way to promote software reuse in AMR systems with consideration to general requirements to be self-contained, platform-independent and real-time predictable. A framework for component-oriented programming for AMR software development using PECOS component model is proposed in this paper. The main features of this framework are: (1 use graphical representation for components definition and composition; (2 target C language for optimal code generation with resource-constrained micro-controller; and (3 minimal requirement for run-time support. Real-time implementation indicates that, the PECOS component model together with the proposed framework is suitable for resource constrained embedded AMR systems software development.

  17. Subretinal Pigment Epithelial Deposition of Drusen Components Including Hydroxyapatite in a Primary Cell Culture Model.

    Science.gov (United States)

    Pilgrim, Matthew G; Lengyel, Imre; Lanzirotti, Antonio; Newville, Matt; Fearn, Sarah; Emri, Eszter; Knowles, Jonathan C; Messinger, Jeffrey D; Read, Russell W; Guidry, Clyde; Curcio, Christine A

    2017-02-01

    Extracellular deposits containing hydroxyapatite, lipids, proteins, and trace metals that form between the basal lamina of the RPE and the inner collagenous layer of Bruch's membrane are hallmarks of early AMD. We examined whether cultured RPE cells could produce extracellular deposits containing all of these molecular components. Retinal pigment epithelium cells isolated from freshly enucleated porcine eyes were cultured on Transwell membranes for up to 6 months. Deposit composition and structure were characterized using light, fluorescence, and electron microscopy; synchrotron x-ray diffraction and x-ray fluorescence; secondary ion mass spectroscopy; and immunohistochemistry. Apparently functional primary RPE cells, when cultured on 10-μm-thick inserts with 0.4-μm-diameter pores, can produce sub-RPE deposits that contain hydroxyapatite, lipids, proteins, and trace elements, without outer segment supplementation, by 12 weeks. The data suggest that sub-RPE deposit formation is initiated, and probably regulated, by the RPE, as well as the loss of permeability of the Bruch's membrane and choriocapillaris complex associated with age and early AMD. This cell culture model of early AMD lesions provides a novel system for testing new therapeutic interventions against sub-RPE deposit formation, an event occurring well in advance of the onset of vision loss.

  18. Individualized Education Programs for Students with Autism: Including Parents in the Process.

    Science.gov (United States)

    Simpson, Richard L.

    1995-01-01

    The involvement of parents in developing individualized education programs (IEPs) for their children with autism is discussed. Essential components of IEP documents are outlined, and strategies that professionals can use to promote significant family involvement are considered. (Author/SW)

  19. 77 FR 53234 - Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2012-08-31

    ... respondents, including Avaya of Basking Ridge, New Jersey; Cisco Consumer Products LLC of Irvine, California, Cisco Systems International B.V. of the Netherlands, Cisco-Linksys LLC of Irvine, California (collectively, ``Cisco''); Hewlett-Packard Co. (``HP'') of Palo Alto, California; and Extreme Networks, Inc...

  20. Habituation of the cold shock response may include a significant perceptual component.

    Science.gov (United States)

    Barwood, Martin J; Corbett, Jo; Wagstaff, Christopher R D

    2014-02-01

    Accidental immersion in cold water is a risk factor for many occupations. Habituation to cold-water immersion (CWI) is one practical means of reducing the cold shock response (CSR) on immersion. We investigated whether repeated thermoneutral water immersion (TWI) induced a perceptual habituation (i.e., could lessen perceived threat and anxiety) and consequently reduce the CSR on subsequent CWI. There were 12 subjects who completed seven 7-min head-out immersions. Immersions one and seven were CWls [15.0 (0.1) degrees C], and immersions two to six were TWI [34.9 (0.10) degrees C]. Anxiety 120-cm visual analogue scale) and the cardiorespiratory responses [heart rate (f(C)), respiratory frequency (f(R)), tidal volume (V(T)), and minute ventilation (V(E))] to immersion were measured throughout. Data were compared within subject between conditions using ANOVA to an alpha level of 0.05. Acute anxiety was significantly reduced after repeated exposure to the immersion scenario (i.e., TWI): CWI-1: 6.3 (4.4) cm; and CWI-2: 4.5 (4.0) cm [condition mean (SD)]. These differences did not influence the peak in the CSR. The f(C), f(R), and V(E) responses were similar between CWI-1 and CWI-2. V(T) response was significantly lower in CWI-2; mean (SD) across the immersion: CWI-1 1.27 (0.17) vs. CWI-2 1.11 0.21 L. Repeated TWI lessened the anxiety associated with CWI (perceptual habituation). This had a negligible effect on the primary components of the CSR, but did lower VT, which may reduce the volume of any aspirated water in an emergency situation. Reducing the threat appraisal of an environmental stressor may be a useful biproduct of survival training, thereby minimizing psychophysiological strain.

  1. 15 CFR 9.3 - Appliances and equipment included in program.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Appliances and equipment included in... VOLUNTARY LABELING PROGRAM FOR HOUSEHOLD APPLIANCES AND EQUIPMENT TO EFFECT ENERGY CONSERVATION § 9.3 Appliances and equipment included in program. The appliances and equipment included in this program are room...

  2. A classification of components of workplace disability management programs: results from a systematic review.

    Science.gov (United States)

    Gensby, U; Labriola, M; Irvin, E; Amick, B C; Lund, T

    2014-06-01

    This paper presents results from a Campbell systematic review on the nature and effectiveness of workplace disability management programs (WPDM) promoting return to work (RTW), as implemented and practiced by employers. A classification of WPDM program components, based on the review results, is proposed. Twelve databases were searched between 1948 to July 2010 for peer-reviewed studies of WPDM programs provided by employers to re-entering workers with occupational or non-occupational illnesses or injuries. Screening of articles, risk of bias assessment and data extraction were conducted in pairs of reviewers. Studies were clustered around various dimensions of the design and context of programs. 16,932 records were identified by the initial search. 599 papers were assessed for relevance. Thirteen studies met inclusion criteria. Twelve peer reviewed articles (two non-randomized studies, and ten single group experimental before and after studies), including ten different WPDM programs informed the synthesis of results. Narrative descriptions of the included program characteristics provided insight on program scope, components, procedures and human resources involved. However, there were insufficient data on the characteristics of the sample and the effect sizes were uncertain. A taxonomy classifying policies and practices around WPDM programs is proposed. There is insufficient evidence to draw conclusions on the effectiveness of employer provided WPDM programs promoting RTW. It was not possible to determine if specific program components or specific sets of components are driving effectiveness. The proposed taxonomy may guide future WPDM program evaluation and clarify the setup of programs offered to identify gaps in existing company strategies.

  3. System and method for detecting components of a mixture including a valving scheme for competition assays

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-09-19

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  4. System and method for detecting components of a mixture including a valving scheme for competition assays

    Science.gov (United States)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-07-11

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  5. Measurement and monitoring technologies are important SITE program component

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    An ongoing component of the Superfund Innovative Technologies Evaluation (SITE) Program, managed by the US EPA at its Hazardous Waste Engineering Research Laboratory in Cincinnati, is the development and demonstration of new and innovative measurement and monitoring technologies that will be applicable to Superfund site characterization. There are four important roles for monitoring and measurement technologies at Superfund sites: (1) to assess the extent of contamination at a site, (2) to supply data and information to determine impacts to human health and the environment, (3) to supply data to select the appropriate remedial action, and (4) to monitor the success or effectiveness of the selected remedy. The Environmental Monitoring Systems Laboratory in Las Vegas, Nevada (EMSL-LV) has been supporting the development of improved measurement and monitoring techniques in conjunction with the SITE Program with a focus on two areas: Immunoassay for toxic substances and fiber optic sensing for in-situ analysis at Superfund sites

  6. Designing monitoring programs for chemicals of emerging concern in potable reuse ⋯ What to include and what not to include?

    KAUST Repository

    Drewes, Jorg; Anderson, Paul D.; Denslow, Nancy D.; Olivieri, Adam W.; Schlenk, Daniel K.; Snyder, Shane A.; Maruya, Keith

    2012-01-01

    This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than '1' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound. © IWA Publishing 2013.

  7. Designing monitoring programs for chemicals of emerging concern in potable reuse--what to include and what not to include?

    Science.gov (United States)

    Drewes, J E; Anderson, P; Denslow, N; Olivieri, A; Schlenk, D; Snyder, S A; Maruya, K A

    2013-01-01

    This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than '1' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound.

  8. Designing monitoring programs for chemicals of emerging concern in potable reuse ⋯ What to include and what not to include?

    KAUST Repository

    Drewes, Jorg

    2012-11-01

    This study discussed a proposed process to prioritize chemicals for reclaimed water monitoring programs, selection of analytical methods required for their quantification, toxicological relevance of chemicals of emerging concern regarding human health, and related issues. Given that thousands of chemicals are potentially present in reclaimed water and that information about those chemicals is rapidly evolving, a transparent, science-based framework was developed to guide prioritization of which compounds of emerging concern (CECs) should be included in reclaimed water monitoring programs. The recommended framework includes four steps: (1) compile environmental concentrations (e.g., measured environmental concentration or MEC) of CECs in the source water for reuse projects; (2) develop a monitoring trigger level (MTL) for each of these compounds (or groups thereof) based on toxicological relevance; (3) compare the environmental concentration (e.g., MEC) to the MTL; CECs with a MEC/MTL ratio greater than 1 should be prioritized for monitoring, compounds with a ratio less than \\'1\\' should only be considered if they represent viable treatment process performance indicators; and (4) screen the priority list to ensure that a commercially available robust analytical method is available for that compound. © IWA Publishing 2013.

  9. 41 CFR 301-73.1 - What does the Federal travel management program include?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What does the Federal travel management program include? 301-73.1 Section 301-73.1 Public Contracts and Property Management... PROGRAMS General Rules § 301-73.1 What does the Federal travel management program include? The Federal...

  10. Focus on Student Success: Components for Effective Summer Bridge Programs

    Science.gov (United States)

    Gonzalez Quiroz, Alicia; Garza, Nora R.

    2018-01-01

    Using research focused on best practices, focus group information, and data analytics, the Title V: Focus on Student Success (FOSS) Grant created a model for the development, implementation, and evaluation of a summer bridge program. Results included increased academic performance indicators in first-year Hispanic college students. Validation for…

  11. Reactor materials program process water component failure probability

    International Nuclear Information System (INIS)

    Daugherty, W. L.

    1988-01-01

    The maximum rate loss of coolant accident for the Savannah River Production Reactors is presently specified as the abrupt double-ended guillotine break (DEGB) of a large process water pipe. This accident is not considered credible in light of the low applied stresses and the inherent ductility of the piping materials. The Reactor Materials Program was initiated to provide the technical basis for an alternate, credible maximum rate LOCA. The major thrust of this program is to develop an alternate worst case accident scenario by deterministic means. In addition, the probability of a DEGB is also being determined; to show that in addition to being mechanistically incredible, it is also highly improbable. The probability of a DEGB of the process water piping is evaluated in two parts: failure by direct means, and indirectly-induced failure. These two areas have been discussed in other reports. In addition, the frequency of a large bread (equivalent to a DEGB) in other process water system components is assessed. This report reviews the large break frequency for each component as well as the overall large break frequency for the reactor system

  12. Essential components of a successful doctoral program in nanomedicine

    Directory of Open Access Journals (Sweden)

    van de Ven AL

    2014-12-01

    Full Text Available Anne L van de Ven,1,2 Mary H Shann,3 Srinivas Sridhar1,2 1Nanomedicine Science and Technology Center, 2Department of Physics, Northeastern University, Boston, MA, USA; 3School of Education, Boston University, Boston, MA, USAAbstract: The Nanomedicine program at Northeastern University provides a unique interdisciplinary graduate education that combines experiential research, didactic learning, networking, and outreach. Students are taught how to apply nanoscience and nanotechnology to problems in medicine, translate basic research to the development of marketable products, negotiate ethical and social issues related to nanomedicine, and develop a strong sense of community involvement within a global perspective. Since 2006, the program has recruited 50 doctoral students from ten traditional science, technology, and engineering disciplines to participate in the 2-year specialization program. Each trainee received mentoring from two or more individuals, including faculty members outside the student’s home department and faculty members at other academic institutions, and/or clinicians. Both students and faculty members reported a significant increase in interdisciplinary scholarly activities, including publications, presentations, and funded research proposals, as a direct result of the program. Nearly 90% of students graduating with a specialization in nanomedicine have continued on to careers in the health care sector. Currently, 43% of graduates are performing research or developing products that directly involve nanomedicine. This article identifies some key elements of the Nanomedicine program, describes how they were implemented, and reports on the metrics of success.Keywords: nanomedicine, IGERT, nanotechnology, nanoscience, education, graduate training

  13. Essential components of a successful doctoral program in nanomedicine.

    Science.gov (United States)

    van de Ven, Anne L; Shann, Mary H; Sridhar, Srinivas

    2015-01-01

    The Nanomedicine program at Northeastern University provides a unique interdisciplinary graduate education that combines experiential research, didactic learning, networking, and outreach. Students are taught how to apply nanoscience and nanotechnology to problems in medicine, translate basic research to the development of marketable products, negotiate ethical and social issues related to nanomedicine, and develop a strong sense of community involvement within a global perspective. Since 2006, the program has recruited 50 doctoral students from ten traditional science, technology, and engineering disciplines to participate in the 2-year specialization program. Each trainee received mentoring from two or more individuals, including faculty members outside the student's home department and faculty members at other academic institutions, and/or clinicians. Both students and faculty members reported a significant increase in interdisciplinary scholarly activities, including publications, presentations, and funded research proposals, as a direct result of the program. Nearly 90% of students graduating with a specialization in nanomedicine have continued on to careers in the health care sector. Currently, 43% of graduates are performing research or developing products that directly involve nanomedicine. This article identifies some key elements of the Nanomedicine program, describes how they were implemented, and reports on the metrics of success.

  14. Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

    International Nuclear Information System (INIS)

    1993-11-01

    This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

  15. Global agenda, local health: including concepts of health security in preparedness programs at the jurisdictional level.

    Science.gov (United States)

    Eby, Chas

    2014-01-01

    The Global Health Security Agenda's objectives contain components that could help health departments address emerging public health challenges that threaten the population. As part of the agenda, partner countries with advanced public health systems will support the development of infrastructure in stakeholder health departments. To facilitate this process and augment local programs, state and local health departments may want to include concepts of health security in their public health preparedness offices in order to simultaneously build capacity. Health security programs developed by public health departments should complete projects that are closely aligned with the objectives outlined in the global agenda and that facilitate the completion of current preparedness grant requirements. This article identifies objectives and proposes tactical local projects that run parallel to the 9 primary objectives of the Global Health Security Agenda. Executing concurrent projects at the international and local levels in preparedness offices will accelerate the completion of these objectives and help prevent disease epidemics, detect health threats, and respond to public health emergencies. Additionally, future funding tied or related to health security may become more accessible to state and local health departments that have achieved these objectives.

  16. Is Stacking Intervention Components Cost-Effective? An Analysis of the Incredible Years Program

    Science.gov (United States)

    Foster, E. Michael; Olchowski, Allison E.; Webster-Stratton, Carolyn H.

    2007-01-01

    The cost-effectiveness of delivering stacked multiple intervention components for children is compared to implementing single intervention by analyzing the Incredible Years Series program. The result suggests multiple intervention components are more cost-effective than single intervention components.

  17. EEGLAB: an open source toolbox for analysis of single-trial EEG dynamics including independent component analysis.

    Science.gov (United States)

    Delorme, Arnaud; Makeig, Scott

    2004-03-15

    We have developed a toolbox and graphic user interface, EEGLAB, running under the crossplatform MATLAB environment (The Mathworks, Inc.) for processing collections of single-trial and/or averaged EEG data of any number of channels. Available functions include EEG data, channel and event information importing, data visualization (scrolling, scalp map and dipole model plotting, plus multi-trial ERP-image plots), preprocessing (including artifact rejection, filtering, epoch selection, and averaging), independent component analysis (ICA) and time/frequency decompositions including channel and component cross-coherence supported by bootstrap statistical methods based on data resampling. EEGLAB functions are organized into three layers. Top-layer functions allow users to interact with the data through the graphic interface without needing to use MATLAB syntax. Menu options allow users to tune the behavior of EEGLAB to available memory. Middle-layer functions allow users to customize data processing using command history and interactive 'pop' functions. Experienced MATLAB users can use EEGLAB data structures and stand-alone signal processing functions to write custom and/or batch analysis scripts. Extensive function help and tutorial information are included. A 'plug-in' facility allows easy incorporation of new EEG modules into the main menu. EEGLAB is freely available (http://www.sccn.ucsd.edu/eeglab/) under the GNU public license for noncommercial use and open source development, together with sample data, user tutorial and extensive documentation.

  18. Meta-analysis of graduated driver licensing laws: effectiveness of specific program components : traffic tech.

    Science.gov (United States)

    2015-11-01

    Graduated driver licensing (GDL) programs in the United States do not represent a single homogeneous intervention; rather, they contain different combinations and variations of program components. Programs vary by the duration of each stage of the GD...

  19. 12 CFR 361.6 - What outreach efforts are included in this program?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false What outreach efforts are included in this program? 361.6 Section 361.6 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY MINORITY AND WOMEN OUTREACH PROGRAM CONTRACTING § 361.6 What outreach efforts...

  20. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

  1. Reliability and integrity management program for PBMR helium pressure boundary components - HTR2008-58036

    International Nuclear Information System (INIS)

    Fleming, K. N.; Gamble, R.; Gosselin, S.; Fletcher, J.; Broom, N.

    2008-01-01

    The purpose of this paper is to present the results of a study to establish strategies for the reliability and integrity management (RIM) of passive metallic components for the PBMR. The RIM strategies investigated include design elements, leak detection and testing approaches, and non-destructive examinations. Specific combinations of strategies are determined to be necessary and sufficient to achieve target reliability goals for passive components. This study recommends a basis for the RIM program for the PBMR Demonstration Power Plant (DPP) and provides guidance for the development by the American Society of Mechanical Engineers (ASME) of RIM requirements for Modular High Temperature Gas-Cooled Reactors (MHRs). (authors)

  2. Comprehensive adolescent health programs that include sexual and reproductive health services: a systematic review.

    Science.gov (United States)

    Kågesten, Anna; Parekh, Jenita; Tunçalp, Ozge; Turke, Shani; Blum, Robert William

    2014-12-01

    We systematically reviewed peer-reviewed and gray literature on comprehensive adolescent health (CAH) programs (1998-2013), including sexual and reproductive health services. We screened 36 119 records and extracted articles using predefined criteria. We synthesized data into descriptive characteristics and assessed quality by evidence level. We extracted data on 46 programs, of which 19 were defined as comprehensive. Ten met all inclusion criteria. Most were US based; others were implemented in Egypt, Ethiopia, and Mexico. Three programs displayed rigorous evidence; 5 had strong and 2 had modest evidence. Those with rigorous or strong evidence directly or indirectly influenced adolescent sexual and reproductive health. The long-term impact of many CAH programs cannot be proven because of insufficient evaluations. Evaluation approaches that take into account the complex operating conditions of many programs are needed to better understand mechanisms behind program effects.

  3. TITAN: a computer program for accident occurrence frequency analyses by component Monte Carlo simulation

    International Nuclear Information System (INIS)

    Nomura, Yasushi; Tamaki, Hitoshi; Kanai, Shigeru

    2000-04-01

    In a plant system consisting of complex equipments and components for a reprocessing facility, there might be grace time between an initiating event and a resultant serious accident, allowing operating personnel to take remedial actions, thus, terminating the ongoing accident sequence. A component Monte Carlo simulation computer program TITAN has been developed to analyze such a complex reliability model including the grace time without any difficulty to obtain an accident occurrence frequency. Firstly, basic methods for the component Monte Carlo simulation is introduced to obtain an accident occurrence frequency, and then, the basic performance such as precision, convergence, and parallelization of calculation, is shown through calculation of a prototype accident sequence model. As an example to illustrate applicability to a real scale plant model, a red oil explosion in a German reprocessing plant model is simulated to show that TITAN can give an accident occurrence frequency with relatively good accuracy. Moreover, results of uncertainty analyses by TITAN are rendered to show another performance, and a proposal is made for introducing of a new input-data format to adapt the component Monte Carlo simulation. The present paper describes the calculational method, performance, applicability to a real scale, and new proposal for the TITAN code. In the Appendixes, a conventional analytical method is shown to avoid complex and laborious calculation to obtain a strict solution of accident occurrence frequency, compared with Monte Carlo method. The user's manual and the list/structure of program are also contained in the Appendixes to facilitate TITAN computer program usage. (author)

  4. 12 CFR 906.12 - What outreach efforts are included in this program?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What outreach efforts are included in this program? 906.12 Section 906.12 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE... Minorities, Women, or Individuals With Disabilities § 906.12 What outreach efforts are included in this...

  5. Generic aging management programs for license renewal of BWR reactor coolant systems components

    International Nuclear Information System (INIS)

    Shah, V.N.; Liu, Y.Y.

    2002-01-01

    The paper reviews the existing generic aging management programs (AMPs) for the reactor coolant system (RCS) components in boiling water reactors (BWRs), including the reactor pressure vessel and internals, the reactor recirculation system, and the connected piping. These programs have been evaluated in the U.S. Nuclear Regulatory Commission (NRC) report, Generic Aging Lessons Learned (GALL), NUREG-1801, for their use in the license renewal process to manage several aging effects, including loss of material, crack initiation and growth, loss of fracture toughness, loss of preload, wall thinning, and cumulative fatigue damage. The program evaluation includes a review of ten attributes (scope of program, preventive actions, parameters monitored/inspected, detection of aging effects, monitoring and trending, acceptance criteria, corrective actions, confirmative process, administrative control, and operating experience) for their effectiveness in managing a specific aging effect in a given component(s). The generic programs are based on the ASME Section XI inservice inspection requirements; industry guidelines for inspection and evaluation of aging effects in BWR reactor vessel, internals, and recirculation piping; monitoring and control of BWR water chemistry; and operating experience as reported in the USNRC generic communications and industry reports. The review concludes that all generic AMPs are acceptable for managing aging effects in BWR RCS components during an extended period of operation and do not need further evaluation. However, the plant-specific programs for managing aging in certain RCS components during an extended period of operation do require further evaluation. For some plant-specific AMPs, the GALL report recommends an aging management activity to verify their effectiveness. An example of such an activity is a one-time inspection of Class 1 small-bore piping to ensure that service-induced weld cracking is not occurring in the piping. Several of

  6. Generic Aging Management Programs for License Renewal of BWR Reactor Coolant System Components

    International Nuclear Information System (INIS)

    Shah, V.N.; Liu, Y.Y.

    2002-01-01

    The paper reviews the existing generic aging management programs (AMPs) for the reactor coolant system (RCS) components in boiling water reactors (BWRs), including the reactor pressure vessel and internals, the reactor recirculation system, and the connected piping. These programs have been evaluated in the U.S. Nuclear Regulatory Commission (NRC) report, Generic Aging Lessons Learned (GALL), NUREG-1801, for their use in the license renewal process to manage several aging effects, including loss of material, crack initiation and growth, loss of fracture toughness, loss of preload, wall thinning, and cumulative fatigue damage. The program evaluation includes a review of ten attributes (scope of program, preventive actions, parameters monitored/inspected, detection of aging effects, monitoring and trending, acceptance criteria, corrective actions, confirmative process, administrative control, and operating experience) for their effectiveness in managing a specific aging effect in a given component(s). The generic programs are based on the ASME Section XI inservice inspection requirements; industry guidelines for inspection and evaluation of aging effects in BWR reactor vessel, internals, and recirculation piping; monitoring and control of BWR water chemistry; and operating experience as reported in the USNRC generic communications and industry reports. The review concludes that all generic AMPs are acceptable for managing aging effects in BWR RCS components during an extended period of operation and do not need further evaluation. However, the plant-specific programs for managing aging in certain RCS components during an extended period of operation do require further evaluation. For some plant-specific AMPs, the GALL report recommends an aging management activity to verify their effectiveness. An example of such an activity is a one-time inspection of Class 1 small-bore piping to ensure that service-induced weld cracking is not occurring in the piping. Several of

  7. IGUN-A program for the simulation of positive ion extraction including magnetic fields

    International Nuclear Information System (INIS)

    Becker, R.; Herrmannsfeldt, W.B.

    1992-01-01

    IGUN is a program for the simulation of positive ion extraction from plasmas. It is based on the well known program EGUN for the calculation of electron and ion trajectories in electron guns and lenses. The mathematical treatment of the plasma sheath is based on a simple analytical model, which provides a numerically stable calculation of the sheath potentials. In contrast to other ion extraction programs, IGUN is able to determine the extracted ion current in succeeding cycles of iteration by itself. However, it is also possible to set values of current, plasma density, or ion current density. Either axisymmetric or rectangular coordinates can be used, including axisymmetric or transverse magnetic fields

  8. igun - A program for the simulation of positive ion extraction including magnetic fields

    Science.gov (United States)

    Becker, R.; Herrmannsfeldt, W. B.

    1992-04-01

    igun is a program for the simulation of positive ion extraction from plasmas. It is based on the well known program egun for the calculation of electron and ion trajectories in electron guns and lenses. The mathematical treatment of the plasma sheath is based on a simple analytical model, which provides a numerically stable calculation of the sheath potentials. In contrast to other ion extraction programs, igun is able to determine the extracted ion current in succeeding cycles of iteration by itself. However, it is also possible to set values of current, plasma density, or ion current density. Either axisymmetric or rectangular coordinates can be used, including axisymmetric or transverse magnetic fields.

  9. Canadian programs on understanding and managing aging degradation of nuclear power plant components

    International Nuclear Information System (INIS)

    Chadha, J.A.; Pachner, J.

    1989-06-01

    Maintaining adequate safety and reliability of nuclear power plants and nuclear power plant life assurance and life extension are growing in importance as nuclear plants get older. Age-related degradation of plant components is complex and not fully understood. This paper provides an overview of the Canadian approach and the main activities and their results towards understanding and managing age-related degradation of nuclear power plant components, structures and systems. A number of pro-active programs have been initiated to anticipate, detect and mitigate potential aging degradation at an early stage before any serious impact on plant safety and reliability. These programs include Operational Safety Management Program, Nuclear Plant Life Assurance Program, systematic plant condition assessment, refurbishment and upgrading, post-service examination and testing, equipment qualification, research and development, and participation in the IAEA programs on safety aspects of nuclear power plant aging and life extension. A regulatory policy on nuclear power plants is under development and will be based on the domestic as well as foreign and international studies and experience

  10. General purpose nonlinear analysis program FINAS for elevated temperature design of FBR components

    International Nuclear Information System (INIS)

    Iwata, K.; Atsumo, H.; Kano, T.; Takeda, H.

    1982-01-01

    This paper presents currently available capabilities of a general purpose finite element nonlinear analysis program FINAS (FBR Inelastic Structural Analysis System) which has been developed at Power Reactor and Nuclear Fuel Development Corporation (PNC) since 1976 to support structural design of fast breeder reactor (FBR) components in Japan. This program is capable of treating inelastic responses of arbitrary complex structures subjected to static and dynamic load histories. Various types of finite element covering rods, beams, pipes, axisymmetric, two and three dimensional solids, plates and shells, are implemented in the program. The thermal elastic-plastic creep analysis is possible for each element type, with primary emphasis on the application to FBR components subjected to sustained or cyclic loads at elevated temperature. The program permits large deformation, buckling, fracture mechanics, and dynamic analyses for some of the element types and provides a number of options for automatic mesh generation and computer graphics. Some examples including elevated temperature effects are shown to demonstrate the accuracy and the efficiency of the program

  11. Commercial Video Programs: A Component to Enhance Language Skills.

    Science.gov (United States)

    Linares, H. A.

    After the passage of a resolution by the South Dakota Board of Regents to place greater emphasis on the study of foreign language, Northern State College introduced commercial video programs in Spanish for classroom use. After installing a parabolic antenna and the other necessary equipment, the department selected and edited a series of programs,…

  12. Trail Crews: Developing a Service Component to Your Program.

    Science.gov (United States)

    Boehringer, Brad; Merrill, Kurt

    Through wilderness stewardship programs, service projects, or trail crews, college outdoor programs can help land management agencies with their maintenance needs and provide student participants with rewarding service learning opportunities. Trail crews are usually composed of volunteer outdoor enthusiasts who take part in a multitude of…

  13. Conflict Resolution Education: A Component of Peer Programs

    Science.gov (United States)

    Mayorga, Mary G.; Oliver, Marvarene

    2006-01-01

    Conflict resolution programs are one part of peer programs offered in schools to enhance the development of life skills of students. This article addresses the need for and role of conflict resolution education in the schools. It then describes several approaches to conflict resolution education. A review of outcome research concerning conflict…

  14. Root Causes of Component Failures Program: Methods and applications

    International Nuclear Information System (INIS)

    Satterwhite, D.G.; Cadwallader, L.C.; Vesely, W.E.; Meale, B.M.

    1986-12-01

    This report contains information pertaining to definitions, methodologies, and applications of root cause analysis. Of specific interest, and highlighted throughout the discussion, are applications pertaining to current and future Nuclear Regulatory Commission (NRC) light water reactor safety programs. These applications are discussed in view of addressing specific program issues under NRC consideration and reflect current root cause analysis capabilities

  15. Application of quality assurance program to safety related aging equipment or components

    International Nuclear Information System (INIS)

    Papaiya, N.C.

    1990-01-01

    This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

  16. Recommended Resources for Planning to Evaluate Program Improvement Efforts (Including the SSIP)

    Science.gov (United States)

    National Center for Systemic Improvement at WestEd, 2015

    2015-01-01

    This document provides a list of recommended existing resources for state Part C and Part B 619 staff and technical assistance (TA) providers to utilize to support evaluation planning for program improvement efforts (including the State Systemic Improvement Plan, SSIP). There are many resources available related to evaluation and evaluation…

  17. 43 CFR 43.215 - What must I include in my drug-free awareness program?

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false What must I include in my drug-free awareness program? 43.215 Section 43.215 Public Lands: Interior Office of the Secretary of the Interior GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Requirements for Recipients Other Than Individuals § 43.215 What must I...

  18. 29 CFR 1472.215 - What must I include in my drug-free awareness program?

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false What must I include in my drug-free awareness program? 1472.215 Section 1472.215 Labor Regulations Relating to Labor (Continued) FEDERAL MEDIATION AND CONCILIATION SERVICE GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Requirements for Recipients Other Than Individuals § 1472.215...

  19. Integrative Biological Chemistry Program Includes the Use of Informatics Tools, GIS and SAS Software Applications

    Science.gov (United States)

    D'Souza, Malcolm J.; Kashmar, Richard J.; Hurst, Kent; Fiedler, Frank; Gross, Catherine E.; Deol, Jasbir K.; Wilson, Alora

    2015-01-01

    Wesley College is a private, primarily undergraduate minority-serving institution located in the historic district of Dover, Delaware (DE). The College recently revised its baccalaureate biological chemistry program requirements to include a one-semester Physical Chemistry for the Life Sciences course and project-based experiential learning…

  20. 77 FR 61012 - Expansion of Importer Self-Assessment Program To Include Qualified Importers of Focused...

    Science.gov (United States)

    2012-10-05

    ... of International Trade, has determined that the company represents an acceptable risk to CBP, if the... Executive Director, Trade Policy and Programs, Office of International Trade, at [email protected] benefits: Entitled to receive entry summary trade data, including analysis support, from CBP. Consultation...

  1. Component Composability Issues in Object-Oriented Programming

    NARCIS (Netherlands)

    Aksit, Mehmet; Tekinerdogan, B.

    1997-01-01

    Building software from reusable components is considered important in reducing development costs. Object-oriented languages such as C++, Smalltalk and Java, however, are not capable of expressing certain aspects of applications in a composable way. Software engineers may experience difficulties in

  2. Components of a comprehensive capital equipment planning program.

    Science.gov (United States)

    Gresch, Alan

    2010-01-01

    As you may have already figured out, there is crossover and gaps between all of these capital equipment components. CE often will, and proactively should, make recommendations based on the CE, clinical, and financial components but rarely has direct knowledge of the strategic element. The clinical, finance, and administrative folks likely have visibility to most of these, but may lack full awareness of at least one component. The key is to engage key stakeholders from all these critical areas and develop a process to pull all this information together in one nice, neat package. Defining the person or persons responsible for taking the lead on this in your organization will depend greatly on the organization's type and size. For a single, standalone community hospital, it will likely be the facility administrator. For an integrated delivery network (IDN), a corporate entity, led by supply chain, finance, or both, may take the lead. Your organization may also employ consultative services or software to help facilitate this function. Regardless of who takes the lead, a weighting or scoring system that assigns certain values in all the outlined component categories, is clearly defined, and is easy to understand for all the contributors will need to be developed. If you are unaware or unclear of what the process is, find out and figure out how you can be a vital contributor to the process. This is one more way you can demonstrate the value you and your department bring to your organization.

  3. Material testing facilities and programs for plasma-facing component testing

    Science.gov (United States)

    Linsmeier, Ch.; Unterberg, B.; Coenen, J. W.; Doerner, R. P.; Greuner, H.; Kreter, A.; Linke, J.; Maier, H.

    2017-09-01

    Component development for operation in a large-scale fusion device requires thorough testing and qualification for the intended operational conditions. In particular environments are necessary which are comparable to the real operation conditions, allowing at the same time for in situ/in vacuo diagnostics and flexible operation, even beyond design limits during the testing. Various electron and neutral particle devices provide the capabilities for high heat load tests, suited for material samples and components from lab-scale dimensions up to full-size parts, containing toxic materials like beryllium, and being activated by neutron irradiation. To simulate the conditions specific to a fusion plasma both at the first wall and in the divertor of fusion devices, linear plasma devices allow for a test of erosion and hydrogen isotope recycling behavior under well-defined and controlled conditions. Finally, the complex conditions in a fusion device (including the effects caused by magnetic fields) are exploited for component and material tests by exposing test mock-ups or material samples to a fusion plasma by manipulator systems. They allow for easy exchange of test pieces in a tokamak or stellarator device, without opening the vessel. Such a chain of test devices and qualification procedures is required for the development of plasma-facing components which then can be successfully operated in future fusion power devices. The various available as well as newly planned devices and test stands, together with their specific capabilities, are presented in this manuscript. Results from experimental programs on test facilities illustrate their significance for the qualification of plasma-facing materials and components. An extended set of references provides access to the current status of material and component testing capabilities in the international fusion programs.

  4. [Intervention programs in hospital nutrition: actions, design, components and implementation].

    Science.gov (United States)

    Santana Porben, S; Barreto Penié, J

    2005-01-01

    Metabolic, Nutrient and Feeding Intervention Programs must become the methodological tool for dealing with the health problem posed by disease-associated-malnutrition on one side, and the "Bad Practices" affecting the nutritional status of the patient, on the other one. Programs like these ones should prescribe clear policies and actions in the three domains of contemporary medical practice: assistance, research and education. The fullfillment of these Program's objectives, and the relization of the implicit benefits, will only be possible if a methodological platform that armonically integrates elements of Continuous Education, Cost Analysis, Recording and Documentation, and Quality Control and Assurance, is created. The experience acumulated after the inception and conduction of the Intervention Program at the Clinical-Surgical "Hermanos Ameijeiras" Hospital (Havana City, Cuba) has served to demostrate that it is feasible not only to create a theoretical and practical body to satisfy the aforementioned goals, but, also, to export it to another institutions of the country, in view of the fact that minimal investments for adquiring the resources needed to deploy such Program, as well as for training and capacitation of medic and paramedic personel in the corresponding Recording & Documentation and Feeding & Nutrition Good Practices might result in short-term economical and medical care benefits.

  5. Algorithms and programs of dynamic mixture estimation unified approach to different types of components

    CERN Document Server

    Nagy, Ivan

    2017-01-01

    This book provides a general theoretical background for constructing the recursive Bayesian estimation algorithms for mixture models. It collects the recursive algorithms for estimating dynamic mixtures of various distributions and brings them in the unified form, providing a scheme for constructing the estimation algorithm for a mixture of components modeled by distributions with reproducible statistics. It offers the recursive estimation of dynamic mixtures, which are free of iterative processes and close to analytical solutions as much as possible. In addition, these methods can be used online and simultaneously perform learning, which improves their efficiency during estimation. The book includes detailed program codes for solving the presented theoretical tasks. Codes are implemented in the open source platform for engineering computations. The program codes given serve to illustrate the theory and demonstrate the work of the included algorithms.

  6. Development of the disposal technology research component of the national uranium tailings program

    International Nuclear Information System (INIS)

    Melis, L.A.

    1983-03-01

    The National Technical Planning Group on Uranium Tailings Research, organized by CANMET in 1980, recommended the establishment of a National Uranium Tailings Program to develop research on the long-term abandonment of uranium mine tailings. This report deals with the disposal technology component of this program and attempts to provide recommendations with respect to potential research avenues in this area. A description of uranium tailings in Canada is provided in order to identify the current situation with uranium tailings management. Uranium mining sites described include the Elliot Lake and Bancroft area of Ontario, the northern Saskatchewan properties and the two abandoned sites in the North West Territories. The description of the sites was facilitated by subdividing the tailings into inactive sites, active sites, new tailings sites and areas of tailings in a close-out situation. Methods identified as promising include subsurface disposal, in-situ leaching, prevention of pyrite oxidation and reclamation studies at abandoned sites

  7. Sodium components cleaning status in the Italian fast reactor program

    Energy Technology Data Exchange (ETDEWEB)

    De Luca, B [CNEN-RIT/MAT - Laboratorio Sviluppo Processi - C.S.N. Cassacia, Rome (Italy); Labanti, V [CNEN-DRV, Bologna (Italy); Mennucci, M [NIRA, Genoa (Italy)

    1978-08-01

    As a consequence of the Italian Fast Reactor Development, mainly aimed to the PEC project and to the participation in the French Superphenix project, it is of increasing importance to set up a reliable method for specific reactor components and related test loops. The first problem was the cleaning of the PEC fuelling machine. In order to perform the routine maintenance of the machine an alcohol cleaning method based on the use of 2-butoxyethanol-NN dimethylformamide mixture has been proposed.

  8. 36 CFR 72.11 - Action program components.

    Science.gov (United States)

    2010-07-01

    ... of the Action Program will be placed on the rehabilitation of deteriorating facilities, it also will describe how the rehabilitation effort is linked to the overall goals, priorities and strategies of the... linked to the objectives, needs, plans, and institutional arrangements of the community. The Action...

  9. TITAN: a computer program for accident occurrence frequency analyses by component Monte Carlo simulation

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, Yasushi [Department of Fuel Cycle Safety Research, Nuclear Safety Research Center, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Tamaki, Hitoshi [Department of Safety Research Technical Support, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Kanai, Shigeru [Fuji Research Institute Corporation, Tokyo (Japan)

    2000-04-01

    In a plant system consisting of complex equipments and components for a reprocessing facility, there might be grace time between an initiating event and a resultant serious accident, allowing operating personnel to take remedial actions, thus, terminating the ongoing accident sequence. A component Monte Carlo simulation computer program TITAN has been developed to analyze such a complex reliability model including the grace time without any difficulty to obtain an accident occurrence frequency. Firstly, basic methods for the component Monte Carlo simulation is introduced to obtain an accident occurrence frequency, and then, the basic performance such as precision, convergence, and parallelization of calculation, is shown through calculation of a prototype accident sequence model. As an example to illustrate applicability to a real scale plant model, a red oil explosion in a German reprocessing plant model is simulated to show that TITAN can give an accident occurrence frequency with relatively good accuracy. Moreover, results of uncertainty analyses by TITAN are rendered to show another performance, and a proposal is made for introducing of a new input-data format to adapt the component Monte Carlo simulation. The present paper describes the calculational method, performance, applicability to a real scale, and new proposal for the TITAN code. In the Appendixes, a conventional analytical method is shown to avoid complex and laborious calculation to obtain a strict solution of accident occurrence frequency, compared with Monte Carlo method. The user's manual and the list/structure of program are also contained in the Appendixes to facilitate TITAN computer program usage. (author)

  10. Research program Integrity of Components (FKS). A substantial contribution to component safety

    International Nuclear Information System (INIS)

    Kussmaul, K.; Roos, E.; Foehl, J.

    1998-01-01

    The main objectives pursued are: (a) verify the quality of reactor pressure vessels in existing LWR-type reactors, and (b) quantify the safety margin using both specified and non-specified materials and welds. On the basis of knowledge obtained through earlier programmes, the research project was to examine in particular deviations from the specified materials properties, for more exact quantification of the safety margin before RPV failure. There are three major factors influencing the component performance until failure, which are aggregate material fatigue, flaws, loading conditions, and the research work was to focus on the materials properties. An item of main interest was to assess the impact of long service life on the materials properties, assuming particularly unfavourable boundary conditions for materials properties and operational loads. (orig./CB) [de

  11. Simulated selection responses for breeding programs including resistance and resilience to parasites in Creole goats.

    Science.gov (United States)

    Gunia, M; Phocas, F; Gourdine, J-L; Bijma, P; Mandonnet, N

    2013-02-01

    The Creole goat is a local breed used for meat production in Guadeloupe (French West Indies). As in other tropical countries, improvement of parasite resistance is needed. In this study, we compared predicted selection responses for alternative breeding programs with or without parasite resistance and resilience traits. The overall breeding goal included traits for production, reproduction, and parasite resilience and resistance to ensure a balanced selection outcome. The production traits were BW and dressing percentage (DP). The reproduction trait was fertility (FER), which was the number of doe kiddings per mating. The resistance trait was worm fecal egg count (FEC), which is a measurement of the number of gastro-intestinal parasite eggs found in the feces. The resilience trait was the packed cell volume (PCV), which is a measurement of the volume of red blood cells in the blood. Dressing percentage, BW, and FEC were measured at 11 mo of age, which is the mating or selling age. Fertility and PCV were measured on females at each kidding period. The breeding program accounting for the overall breeding goal and a selection index including all traits gave annual selection responses of 800 g for BW, 3.75% for FER, 0.08% for DP, -0.005 ln(eggs/g) for FEC, and 0.28% for PCV. The expected selection responses for BW and DP in this breeding program were reduced by 2% and 6%, respectively, compared with a breeding program not accounting for FEC and PCV. The overall breeding program, proposed for the Creole breed, offers the best breeding strategy in terms of expected selection responses, making it possible to improve all traits together. It offers a good balance between production and adaptation traits and may present some interest for the selection of other goat breeds in the tropics.

  12. 20 CFR 627.220 - Coordination with programs under title IV of the Higher Education Act including the Pell grant...

    Science.gov (United States)

    2010-04-01

    ... the Higher Education Act including the Pell grant program. 627.220 Section 627.220 Employees' Benefits... of the Higher Education Act including the Pell grant program. (a) Coordination. Financial assistance programs under title IV of the Higher Education Act of 1965, as amended (HEA) (the Pell Grant program, the...

  13. Including oral health training in a health system strengthening program in Rwanda

    Directory of Open Access Journals (Sweden)

    Brittany Seymour

    2013-03-01

    Full Text Available Objective: Rwanda's Ministry of Health, with the Clinton Health Access Initiative, implemented the Human Resources for Health (HRH Program. The purpose of the program is to train and retain high-quality health care professionals to improve and sustain health in Rwanda. Design: In May 2011, an oral health team from Rwanda and the United States proposed that oral health be included in the HRH Program, due to its important links to health, in a recommendation to the Rwandan Ministry of Health. The proposal outlined a diagonal approach to curriculum design that supports the principles of global health through interconnected training for both treatment and collaborative prevention, rather than discipline-based fragmented training focused on isolated risk factors. It combined ‘vertical’ direct patient care training with ‘horizontal’ interdisciplinary training to address common underlying risk factors and associations for disease through primary care, program retention, and sustainability. Results: The proposal was accepted by the Ministry of Health and was approved for funding by the US Government and The Global Fund. Rwanda's first Bachelor of Dental Surgery program, which is in the planning phase, is being developed. Conclusions: Competencies, the training curriculum, insurance and payment schemes, licensure, and other challenges are currently being addressed. With the Ministry of Health supporting the dental HRH efforts and fully appreciating the importance of oral health, all are hopeful that these developments will ultimately lead to more robust oral health data collection, a well-trained and well-retained dental profession, and vastly improved oral health and overall health for the people of Rwanda in the decades to come.

  14. Including oral health training in a health system strengthening program in Rwanda

    Science.gov (United States)

    Seymour, Brittany; Muhumuza, Ibra; Mumena, Chris; Isyagi, Moses; Barrow, Jane; Meeks, Valli

    2013-01-01

    Objective Rwanda's Ministry of Health, with the Clinton Health Access Initiative, implemented the Human Resources for Health (HRH) Program. The purpose of the program is to train and retain high-quality health care professionals to improve and sustain health in Rwanda. Design In May 2011, an oral health team from Rwanda and the United States proposed that oral health be included in the HRH Program, due to its important links to health, in a recommendation to the Rwandan Ministry of Health. The proposal outlined a diagonal approach to curriculum design that supports the principles of global health through interconnected training for both treatment and collaborative prevention, rather than discipline-based fragmented training focused on isolated risk factors. It combined ‘vertical’ direct patient care training with ‘horizontal’ interdisciplinary training to address common underlying risk factors and associations for disease through primary care, program retention, and sustainability. Results The proposal was accepted by the Ministry of Health and was approved for funding by the US Government and The Global Fund. Rwanda's first Bachelor of Dental Surgery program, which is in the planning phase, is being developed. Conclusions Competencies, the training curriculum, insurance and payment schemes, licensure, and other challenges are currently being addressed. With the Ministry of Health supporting the dental HRH efforts and fully appreciating the importance of oral health, all are hopeful that these developments will ultimately lead to more robust oral health data collection, a well-trained and well-retained dental profession, and vastly improved oral health and overall health for the people of Rwanda in the decades to come. PMID:23473054

  15. Heat source component development program, October 1977--February 1978

    International Nuclear Information System (INIS)

    1978-03-01

    The General Purpose Heat Source (GPHS) is being developed by Los Alamos Scientific Laboratory (LASL) for the Department of Energy (DOE) Division of Nuclear Research and Application (DNRA). The first mission scheduled for the GPHS is the NASA Out-of-Ecliptic Flight in January, 1983. During the current reporting period (October--December, 1977, January--February, 1978), activities in this task were conducted as follows: (1) documentation of results of the reentry thermal, ablation, and thermal stress analyses of the conceptual designs; (2) identification and completion of modifications to the thermal and ablation models used to determine the performance response of the heat source modules during reentry; (3) initiation of modifications to the thermal stress model used to determine the performance response of heat source modules during reentry; (4) completion and documentation of the surface chemistry experiments; (5) initiation and completion of activities in support of LASL to define test plans for the trial design phase of the GPHS development program; (6) participation in the GPHS design review meeting held at DOE/Germantown, Maryland, December 19--20, 1977; and (7) initiation of the thermal analysis of Trial Design 1.1

  16. ARCPEP Project - Army Reserve Component Personal Empowerment Program

    Science.gov (United States)

    2011-04-01

    reported medical issues that reflect CV risks including high cholesterol 16% and hypertension 11%. Overweight and obesity by BMI were alarmingly...following is NOT likely to cause tooth decay when used frequently during the day or between meals? Regular soft drinks (soda, pop) Sports drinks or...needed an effective, affordable way to identify the dental and medical issues which impact the operational readiness of its units. With measurable

  17. An algorithm to include the bremsstrahlung component in the determination of the absorbed dose in electron beams

    Energy Technology Data Exchange (ETDEWEB)

    Klevenhagen, S C [The Royal London Hospital, London (United Kingdom). Medical Physics Dept.

    1996-08-01

    Currently used dosimetry protocols for absolute dose determination of electron beams from accelerators in radiation therapy do not account for the effect of the bremsstrahlung contamination of the beam. This results in slightly erroneous doses calculated from ionization chamber measurements. In this report the deviation is calculated and an improved algorithm, which accounts for the effect of the bremsstrahlung component of the beam, is suggested. (author). 14 refs, 2 figs, 1 tab.

  18. Clean Diesel Engine Component Improvement Program Diesel Truck Thermoelectric Generator

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, N. B. [Hi-Z Technology, Inc., San Diego, CA (United States); Bass, J. C. [Hi-Z Technology, Inc., San Diego, CA (United States); Ghamaty, S. [Hi-Z Technology, Inc., San Diego, CA (United States); Krommenhoek, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Kushch, A. [Hi-Z Technology, Inc., San Diego, CA (United States); Snowden, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Marchetti, S. [Hi-Z Technology, Inc., San Diego, CA (United States)

    2005-03-16

    Hi-Z Technology, Inc. (Hi-Z) is currently developing four different auxiliary generator designs that are used to convert a portion (5 to 20%) of the waste heat from vehicle engines exhaust directly to electricity. The four designs range from 200 Watts to 10 kW. The furthest along is the 1 kW Diesel Truck Thermoelectric Generator (DTTEG) for heavy duty Class 8 Diesel trucks, which, under this program, has been subjected to 543,000 equivalent miles of bouncing and jarring on PACCAR's test track. Test experience on an earlier version of the DTTEG on the same track showed the need for design modifications incorporated in DTTEG Mod 2, such as a heavy duty shock mounting system and reinforcement of the electrical leads mounting system, the thermocouple mounting system and the thermoelectric module restraints. The conclusion of the 543,000 mile test also pointed the way for an upgrading to heavy duty hose or flex connections for the internal coolant connections for the TEG, and consideration of a separate lower temperature cooling loop with its own radiator. Fuel savings of up to $750 per year and a three to five year payback are believed to be possible with the 5 % efficiency modules. The economics are expected to improve considerably to approach a two year payback when the 5 kW to 10 kW generators make it to the market in a few years with a higher efficiency (20%) thermoelectric module system called Quantum Wells, which are currently under development by Hi-Z. Ultimately, as automation takes over to reduce material and labor costs in the high volume production of QW modules, a one year payback for the 5 kW to10 kW generator appears possible. This was one of the stated goals at the beginning of the project. At some future point in time, with the DTTEG becoming standard equipment on all trucks and automobiles, fuel savings from the 25% conversion of exhaust heat to useable electricity nationwide equates to a 10% reduction in the 12 to 15 million barrels per day of

  19. An analysis of dietary fiber and fecal fiber components including pH in rural Africans with colorectal cancer.

    Science.gov (United States)

    Faruk, Mohammed; Ibrahim, Sani; Adamu, Ahmed; Rafindadi, Abdulmumini Hassan; Ukwenya, Yahaya; Iliyasu, Yawale; Adamu, Abdullahi; Aminu, Surajo Mohammed; Shehu, Mohammed Sani; Ameh, Danladi Amodu; Mohammed, Abdullahi; Ahmed, Saad Aliyu; Idoko, John; Ntekim, Atara; Suleiman, Aishatu Maude; Shah, Khalid Zahir; Adoke, Kasimu Umar

    2018-01-01

    Colorectal cancer (CRC) is now a major public health problem with heavy morbidity and mortality in rural Africans despite the lingering dietary fiber-rich foodstuffs consumption. Studies have shown that increased intake of dietary fiber which contribute to low fecal pH and also influences the activity of intestinal microbiota, is associated with a lowered risk for CRC. However, whether or not the apparent high dietary fiber consumption by Africans do not longer protects against CRC risk is unknown. This study evaluated dietary fiber intake, fecal fiber components and pH levels in CRC patients. Thirty-five subjects (CRC=21, control=14), mean age 45 years were recruited for the study. A truncated food frequency questionnaire and modified Goering and Van Soest procedures were used. We found that all subjects consumed variety of dietary fiber-rich foodstuffs. There is slight preponderance in consumption of dietary fiber by the control group than the CRC patients. We also found a significant difference in the mean fecal neutral detergent fiber, acid detergent fiber, hemicellulose, cellulose and lignin contents from the CRC patients compared to the controls ( P fiber components and stool pH levels between the 2 groups may relate to CRC incidence and mortality in rural Africans. There is crucial need for more hypothesis-driven research with adequate funding on the cumulative preventive role of dietary fiber-rich foodstuffs against colorectal cancer in rural Africans "today."

  20. Vulnerability assessment including tangible and intangible components in the index composition: An Amazon case study of flooding and flash flooding.

    Science.gov (United States)

    Andrade, Milena Marília Nogueira de; Szlafsztein, Claudio Fabian

    2018-07-15

    The vulnerability of cities and communities in the Amazon to flooding and flash flooding is increasing. The effects of extreme events on populations vary across landscapes, causing vulnerability to differ spatially. Traditional vulnerability studies in Brazil and across the world have used the vulnerability index for the country and, more recently, municipality scales. The vulnerability dimensions are exposure, sensitivity, and adaptive capacity. For each of these dimensions, there is a group of indicators that constitutes a vulnerability index using quantitative data. Several vulnerability assessments have used sensitivity and exposure analyses and, recently, adaptive capacity has been considered. The Geographical Information Systems (GIS) analysis allows spatial regional modeling using quantitative vulnerability indicators. This paper presents a local-scale vulnerability assessment in an urban Amazonian area, Santarém City, using interdisciplinary methods. Data for exposure and sensitivity were gathered by remote sensing and census data, respectively. However, adaptive capacity refers to local capacities, whether infrastructural or not, and the latter were gathered by qualitative participatory methods. For the mixed data used to study adaptive capacity, we consider tangible components for countable infrastructure that can cope with hazards, and intangible components that reflect social activities based on risk perceptions and collective action. The results indicate that over 80% of the area is highly or moderately vulnerable to flooding and flash flooding. Exposure and adaptive capacity were determinants of the results. Lower values of adaptive capacity play a significant role in vulnerability enhancement. Copyright © 2018 Elsevier B.V. All rights reserved.

  1. The effects of exercise program on burnout and metabolic syndrome components in banking and insurance workers.

    Science.gov (United States)

    Tsai, Han Hui; Yeh, Ching Ying; Su, Chien Tien; Chen, Chiou Jong; Peng, Shu Mei; Chen, Ruey Yu

    2013-01-01

    To explore the effectiveness of exercise program for banking and insurance workers and clarify the association between exercise, burnout, and metabolic syndrome components. In the process of the study, a practicable worksite exercise program was developed for bank and insurance enterprises. A three-month (12-wk) exercise course was conducted, and its benefits evaluated. Levels of burnout and metabolic syndrome components were analyzed after exercise intervention. After intervention, the indicators of burnout and metabolic syndrome components were significantly improved in both low and high intensity groups, and the improvement were expressed in reduction of waist circumference, systolic blood pressure, person burnout and work-related burnout. A dose-response of burnouts and metabolic syndrome components with exercise intensity are shown (psyndrome components were independently associated with burnout and exercise intensity in the crude model. After adjustment for potential confounders, waist circumference and systolic blood pressure differences showed significant associations with exercise intensity (pburnouts and metabolic syndrome components.

  2. Computer software program for monitoring the availability of systems and components of electric power generating systems

    International Nuclear Information System (INIS)

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  3. Body Image and quality of life of senior citizens included in a cardiac rehabilitation program

    Directory of Open Access Journals (Sweden)

    Fernanda Vargas Amaral

    2013-12-01

    Full Text Available Most people who have to live with some kind of disease tend to adopt healthy habits and create new ways of seeing themselves. The aim of this study is to explore the relationship between the index of quality of life and self perception of patients included in a cardiovascular rehabilitation program in Florianopolis/Brazil. The sample consists of 24 subjects of 62 ± 1.3 years of age, who have coronary artery disease. The Minnesota Living With Heart Failure Questionnaire (MLHFQ was used to assess the quality of life, and to identify the degree of body image discontentment the Stunkard and Sorensen questionnaire (1993 was applied. Statistical analysis was made through statistics programs and the software SPSS 11.0. The degree of association between variables was studied with Kendall test. It was verified that the higher the BMI and the current body shape, the greatest the degree of body image dissatisfaction. The emotional symptoms also appear to be significantly correlated with a desire for a smaller body shape and with indicators of lower quality of life (r = 0474 = 0735, p major 0.05. The physical symptoms were also considerably associated with the emotional symptoms. These results suggest that the variables concerning the quality of life are meaningful to significant body image and satisfaction, which seems to correlate with fewer emotional problems and better facing of the disease. Cardiovascular Rehabilitation Programs that implement physical activity in daily habits proves to be a suitable tool for improving these ailments in this post-acute phase

  4. [Anti-Candida albicans activity of essential oils including Lemongrass (Cymbopogon citratus) oil and its component, citral].

    Science.gov (United States)

    Abe, Shigeru; Sato, Yuichi; Inoue, Shigeharu; Ishibashi, Hiroko; Maruyama, Naho; Takizawa, Toshio; Oshima, Haruyuki; Yamaguchi, Hideyo

    2003-01-01

    The effects of 12 essential oils, popularly used as antifungal treatments in aromatherapy, on growth of Candida albicans were investigated. Mycelial growth of C. albicans, which is known to give the fungus the capacity to invade mucosal tissues, was inhibited in the medium containing 100 micro g/ml of the oils: lemongrass (Cymbopogon citratus), thyme (Thymus vulgaris), patchouli (Pogostemon cablin) and cedarwood (Cedrus atlantica). Not only lemongrass oil but also citral, a major component of lemongrass oil (80%), in the range of 25 and 200 micro g/ml inhibited the mycelial growth but allowed yeast-form growth. More than 200 micro g/ml of citral clearly inhibited both mycelial and yeast-form growth of C. albicans. These results provide experimental evidence suggesting the potential value of lemongrass oil for the treatment of oral or vaginal candidiasis.

  5. An analysis of dietary fiber and fecal fiber components including pH in rural Africans with colorectal cancer

    Directory of Open Access Journals (Sweden)

    Mohammed Faruk

    2018-01-01

    Full Text Available Background/Aims: Colorectal cancer (CRC is now a major public health problem with heavy morbidity and mortality in rural Africans despite the lingering dietary fiber-rich foodstuffs consumption. Studies have shown that increased intake of dietary fiber which contribute to low fecal pH and also influences the activity of intestinal microbiota, is associated with a lowered risk for CRC. However, whether or not the apparent high dietary fiber consumption by Africans do not longer protects against CRC risk is unknown. This study evaluated dietary fiber intake, fecal fiber components and pH levels in CRC patients. Methods: Thirty-five subjects (CRC=21, control=14, mean age 45 years were recruited for the study. A truncated food frequency questionnaire and modified Goering and Van Soest procedures were used. Results: We found that all subjects consumed variety of dietary fiber-rich foodstuffs. There is slight preponderance in consumption of dietary fiber by the control group than the CRC patients. We also found a significant difference in the mean fecal neutral detergent fiber, acid detergent fiber, hemicellulose, cellulose and lignin contents from the CRC patients compared to the controls (P<0.05. The CRC patients had significantly more fecal pH level than the matched apparently healthy controls (P=0.017. Conclusions: The identified differences in the fecal fiber components and stool pH levels between the 2 groups may relate to CRC incidence and mortality in rural Africans. There is crucial need for more hypothesis-driven research with adequate funding on the cumulative preventive role of dietary fiber-rich foodstuffs against colorectal cancer in rural Africans “today.”

  6. A tool to include gamma analysis software into a quality assurance program.

    Science.gov (United States)

    Agnew, Christina E; McGarry, Conor K

    2016-03-01

    To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

  7. Including nonadditive genetic effects in mating programs to maximize dairy farm profitability.

    Science.gov (United States)

    Aliloo, H; Pryce, J E; González-Recio, O; Cocks, B G; Goddard, M E; Hayes, B J

    2017-02-01

    We compared the outcome of mating programs based on different evaluation models that included nonadditive genetic effects (dominance and heterozygosity) in addition to additive effects. The additive and dominance marker effects and the values of regression on average heterozygosity were estimated using 632,003 single nucleotide polymorphisms from 7,902 and 7,510 Holstein cows with calving interval and production (milk, fat, and protein yields) records, respectively. Expected progeny values were computed based on the estimated genetic effects and genotype probabilities of hypothetical progeny from matings between the available genotyped cows and the top 50 young genomic bulls. An index combining the traits based on their economic values was developed and used to evaluate the performance of different mating scenarios in terms of dollar profit. We observed that mating programs with nonadditive genetic effects performed better than a model with only additive effects. Mating programs with dominance and heterozygosity effects increased milk, fat, and protein yields by up to 38, 1.57, and 1.21 kg, respectively. The inclusion of dominance and heterozygosity effects decreased calving interval by up to 0.70 d compared with random mating. The average reduction in progeny inbreeding by the inclusion of nonadditive genetic effects in matings compared with random mating was between 0.25 to 1.57 and 0.64 to 1.57 percentage points for calving interval and production traits, respectively. The reduction in inbreeding was accompanied by an average of A$8.42 (Australian dollars) more profit per mating for a model with additive, dominance, and heterozygosity effects compared with random mating. Mate allocations that benefit from nonadditive genetic effects can improve progeny performance only in the generation where it is being implemented, and the gain from specific combining abilities cannot be accumulated over generations. Continuous updating of genomic predictions and mate

  8. Cold and Heat Stress Diversely Alter Both Cauliflower Respiration and Distinct Mitochondrial Proteins Including OXPHOS Components and Matrix Enzymes

    Science.gov (United States)

    Rurek, Michał; Czołpińska, Magdalena; Pawłowski, Tomasz Andrzej; Krzesiński, Włodzimierz; Spiżewski, Tomasz

    2018-01-01

    Complex proteomic and physiological approaches for studying cold and heat stress responses in plant mitochondria are still limited. Variations in the mitochondrial proteome of cauliflower (Brassica oleracea var. botrytis) curds after cold and heat and after stress recovery were assayed by two-dimensional polyacrylamide gel electrophoresis (2D PAGE) in relation to mRNA abundance and respiratory parameters. Quantitative analysis of the mitochondrial proteome revealed numerous stress-affected protein spots. In cold, major downregulations in the level of photorespiratory enzymes, porine isoforms, oxidative phosphorylation (OXPHOS) and some low-abundant proteins were observed. In contrast, carbohydrate metabolism enzymes, heat-shock proteins, translation, protein import, and OXPHOS components were involved in heat response and recovery. Several transcriptomic and metabolic regulation mechanisms are also suggested. Cauliflower plants appeared less susceptible to heat; closed stomata in heat stress resulted in moderate photosynthetic, but only minor respiratory impairments, however, photosystem II performance was unaffected. Decreased photorespiration corresponded with proteomic alterations in cold. Our results show that cold and heat stress not only operate in diverse modes (exemplified by cold-specific accumulation of some heat shock proteins), but exert some associations at molecular and physiological levels. This implies a more complex model of action of investigated stresses on plant mitochondria. PMID:29547512

  9. Critical Components of a Summer Enrichment Program for Urban Low-Income Gifted Students

    Science.gov (United States)

    Kaul, Corina R.; Johnsen, Susan K.; Witte, Mary M.; Saxon, Terrill F.

    2015-01-01

    Effective program models are needed for low-income youth. This article describes one successful summer enrichment program, University for Young People's Project Promise, and outlines three key components of a Partnership for Promoting Potential in Low-Income Gifted Students (Partnership Model), which is based on Lee, Olszewski-Kubilius, and…

  10. An analysis of the procedural components of supported employment programs associated with employment outcomes.

    OpenAIRE

    McDonnell, J; Nofs, D; Hardman, M; Chambless, C

    1989-01-01

    This study examined the relation between the procedural components of supported employment programs and employment outcomes for 120 individuals with disabilities. These individuals were involved in supported employment programs established through the Utah Supported Employment Project. The results suggest that successful implementation of supported employment services led to ongoing employment of study participants in community work sites, increased wages, and ongoing opportunities for worker...

  11. Core components of a comprehensive quality assurance program in anatomic pathology.

    Science.gov (United States)

    Nakhleh, Raouf E

    2009-11-01

    In this article the core components of a comprehensive quality assurance and improvement plan are outlined. Quality anatomic pathology work comes with focus on accurate, timely, and complete reports. A commitment to continuous quality improvement and a systems approach with a persistent effort helps to achieve this end. Departments should have a quality assurance and improvement plan that includes a risk assessment of real and potential problems facing the laboratory. The plan should also list the individuals responsible for carrying out the program with adequate resources, a defined timetable, and annual assessment for progress and future directions. Quality assurance monitors should address regulatory requirements and be organized by laboratory division (surgical pathology, cytology, etc) as well as 5 segments (preanalytic, analytic, postanalytic phases of the test cycle, turn-around-time, and customer satisfaction). Quality assurance data can also be used to evaluate individual pathologists using multiple parameters with peer group comparison.

  12. EDF ageing management program of nuclear components: a safety and economical issue

    International Nuclear Information System (INIS)

    Faidy, C.

    2005-01-01

    Ageing management of Nuclear Power Plants is an essential issue for utilities, in term of safety and availability and corresponding economical consequences. Practically all nuclear countries have developed a systematic program to deal with ageing of components on their plants. This paper presents the ageing management program developed by EDF and that are compared with different other approaches in other countries (IAEA guidelines and GALL report). The paper presents a general overview of the programs, the major results, recommendations and conclusions. (author)

  13. 13 CFR 147.215 - What must I include in my drug-free awareness program?

    Science.gov (United States)

    2010-01-01

    ..., rehabilitation, and employee assistance programs; and (d) The penalties that you may impose upon them for drug...-free awareness program? 147.215 Section 147.215 Business Credit and Assistance SMALL BUSINESS... establish an ongoing drug-free awareness program to inform employees about— (a) The dangers of drug abuse in...

  14. Educational program in crisis management for cardiac surgery teams including high realism simulation.

    Science.gov (United States)

    Stevens, Louis-Mathieu; Cooper, Jeffrey B; Raemer, Daniel B; Schneider, Robert C; Frankel, Allan S; Berry, William R; Agnihotri, Arvind K

    2012-07-01

    Cardiac surgery demands effective teamwork for safe, high-quality care. The objective of this pilot study was to develop a comprehensive program to sharpen performance of experienced cardiac surgical teams in acute crisis management. We developed and implemented an educational program for cardiac surgery based on high realism acute crisis simulation scenarios and interactive whole-unit workshop. The impact of these interventions was assessed with postintervention questionnaires, preintervention and 6-month postintervention surveys, and structured interviews. The realism of the acute crisis simulation scenarios gradually improved; most participants rated both the simulation and whole-unit workshop as very good or excellent. Repeat simulation training was recommended every 6 to 12 months by 82% of the participants. Participants of the interactive workshop identified 2 areas of highest priority: encouraging speaking up about critical information and interprofessional information sharing. They also stressed the importance of briefings, early communication of surgical plan, knowing members of the team, and continued simulation for practice. The pre/post survey response rates were 70% (55/79) and 66% (52/79), respectively. The concept of working as a team improved between surveys (P = .028), with a trend for improvement in gaining common understanding of the plan before a procedure (P = .075) and appropriate resolution of disagreements (P = .092). Interviewees reported that the training had a positive effect on their personal behaviors and patient care, including speaking up more readily and communicating more clearly. Comprehensive team training using simulation and a whole-unit interactive workshop can be successfully deployed for experienced cardiac surgery teams with demonstrable benefits in participant's perception of team performance. Copyright © 2012 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

  15. ALGORITHMS AND PROGRAMS FOR STRONG GRAVITATIONAL LENSING IN KERR SPACE-TIME INCLUDING POLARIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Bin; Maddumage, Prasad [Research Computing Center, Department of Scientific Computing, Florida State University, Tallahassee, FL 32306 (United States); Kantowski, Ronald; Dai, Xinyu; Baron, Eddie, E-mail: bchen3@fsu.edu [Homer L. Dodge Department of Physics and Astronomy, University of Oklahoma, Norman, OK 73019 (United States)

    2015-05-15

    Active galactic nuclei (AGNs) and quasars are important astrophysical objects to understand. Recently, microlensing observations have constrained the size of the quasar X-ray emission region to be of the order of 10 gravitational radii of the central supermassive black hole. For distances within a few gravitational radii, light paths are strongly bent by the strong gravity field of the central black hole. If the central black hole has nonzero angular momentum (spin), then a photon’s polarization plane will be rotated by the gravitational Faraday effect. The observed X-ray flux and polarization will then be influenced significantly by the strong gravity field near the source. Consequently, linear gravitational lensing theory is inadequate for such extreme circumstances. We present simple algorithms computing the strong lensing effects of Kerr black holes, including the effects on polarization. Our algorithms are realized in a program “KERTAP” in two versions: MATLAB and Python. The key ingredients of KERTAP are a graphic user interface, a backward ray-tracing algorithm, a polarization propagator dealing with gravitational Faraday rotation, and algorithms computing observables such as flux magnification and polarization angles. Our algorithms can be easily realized in other programming languages such as FORTRAN, C, and C++. The MATLAB version of KERTAP is parallelized using the MATLAB Parallel Computing Toolbox and the Distributed Computing Server. The Python code was sped up using Cython and supports full implementation of MPI using the “mpi4py” package. As an example, we investigate the inclination angle dependence of the observed polarization and the strong lensing magnification of AGN X-ray emission. We conclude that it is possible to perform complex numerical-relativity related computations using interpreted languages such as MATLAB and Python.

  16. ALGORITHMS AND PROGRAMS FOR STRONG GRAVITATIONAL LENSING IN KERR SPACE-TIME INCLUDING POLARIZATION

    International Nuclear Information System (INIS)

    Chen, Bin; Maddumage, Prasad; Kantowski, Ronald; Dai, Xinyu; Baron, Eddie

    2015-01-01

    Active galactic nuclei (AGNs) and quasars are important astrophysical objects to understand. Recently, microlensing observations have constrained the size of the quasar X-ray emission region to be of the order of 10 gravitational radii of the central supermassive black hole. For distances within a few gravitational radii, light paths are strongly bent by the strong gravity field of the central black hole. If the central black hole has nonzero angular momentum (spin), then a photon’s polarization plane will be rotated by the gravitational Faraday effect. The observed X-ray flux and polarization will then be influenced significantly by the strong gravity field near the source. Consequently, linear gravitational lensing theory is inadequate for such extreme circumstances. We present simple algorithms computing the strong lensing effects of Kerr black holes, including the effects on polarization. Our algorithms are realized in a program “KERTAP” in two versions: MATLAB and Python. The key ingredients of KERTAP are a graphic user interface, a backward ray-tracing algorithm, a polarization propagator dealing with gravitational Faraday rotation, and algorithms computing observables such as flux magnification and polarization angles. Our algorithms can be easily realized in other programming languages such as FORTRAN, C, and C++. The MATLAB version of KERTAP is parallelized using the MATLAB Parallel Computing Toolbox and the Distributed Computing Server. The Python code was sped up using Cython and supports full implementation of MPI using the “mpi4py” package. As an example, we investigate the inclination angle dependence of the observed polarization and the strong lensing magnification of AGN X-ray emission. We conclude that it is possible to perform complex numerical-relativity related computations using interpreted languages such as MATLAB and Python

  17. Parental Preferences for the Organization of Preschool Vaccination Programs Including Financial Incentives: A Discrete Choice Experiment

    Directory of Open Access Journals (Sweden)

    Darren Flynn PhD

    2017-05-01

    Full Text Available Objective: To establish preferences of parents and guardians of preschool children for the organization of preschool vaccination services, including financial incentives. Design: An online discrete choice experiment. Participants: Parents and guardians of preschool children (up to age 5 years who were (n = 259 and were not (n = 262 classified as at high risk of incompletely vaccinating their children. High risk of incomplete vaccination was defined as any of the following: aged less than 20 years, single parents, living in one of the 20% most deprived areas in England, had a preschool child with a disability, or had more than three children. Main Outcome Measures: Participant preferences expressed as positive (utility or negative (disutility on eight attributes and levels describing the organization of preschool vaccination programs. Results: There was no difference in preference for parental financial incentives compared to no incentive in parents “not at high risk” of incomplete vaccination. Parents who were “at high risk” expressed utility for cash incentives. Parents “at high risk” of incomplete vaccination expressed utility for information on the risks and benefits of vaccinations to be provided as numbers rather than charts or pictures. Both groups preferred universally available, rather than targeted, incentives. Utility was identified for shorter waiting times, and there were variable preferences for who delivered vaccinations. Conclusions: Cash incentives for preschool vaccinations in England would be welcomed by parents who are “at high risk” of incompletely vaccinating their children. Further work is required on the optimal mode and form of presenting probabilistic information on vaccination to parents/guardians, including preferences on mandatory vaccination schemes.

  18. Apology in the criminal justice setting: evidence for including apology as an additional component in the legal system.

    Science.gov (United States)

    Petrucci, Carrie J

    2002-01-01

    The criminal justice system has reached unprecedented scope in the United States, with over 6.4 million people under some type of supervision. Remedies that have the potential to reduce this number are continually being sought. This article analyzes an innovative strategy currently being reconsidered in criminal justice: the apology. Despite a legal system that only sporadically acknowledges it, evidence for the use of apology is supported by social science research, current criminal justice theories, case law, and empirical studies. Social psychological, sociological and socio-legal studies pinpoint the elements and function of apology, what makes apologies effective, and concerns about apology if it were implemented in the criminal justice system. Theoretical evidence is examined (including restorative justice, therapeutic jurisprudence, crime, shame, and reintegration) to explore the process of apology in the criminal justice context. Attribution theory and social conduct theory are used to explain the apology process specifically for victims and offenders. A brief examination of case law reveals that though apology has no formal place in criminal law, it has surfaced recently under the federal sentencing guidelines. Finally, empirical evidence in criminal justice settings reveals that offenders want to apologize and victims desire an apology. Moreover, by directly addressing the harmful act, apology may be the link to reduced recidivism for offenders, as well as empowerment for victims. This evidence combined suggests that apology is worthy of further study as a potentially valuable addition to the criminal justice process. Copyright 2002 John Wiley & Sons, Ltd.

  19. Heat source component development program. Quarterly report for April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Foster, E.L. Jr. (comp.)

    1977-07-01

    This is the third in a series of quarterly reports describing the results of several experimental programs being conducted at Battelle-Columbus to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. The specific component development efforts which are described include: improved selective and nonselective vents for helium release from the fuel containment; an improved reentry member and an improved impact member, singly and combined. The unitized reentry-impact member (RIM) is under development to be used as a bifunctional ablator. The development of a unitized reentry-impact member (RIM) has been stopped and the efforts are being redirected to the evaluation of materials that could be used in the near term for the module housing of the General Purpose Heat Source (GPHS). This redirection will be particularly felt in the selection of (improved) materials for reentry analysis and in the experimental evaluation of materials in impact tests. Finally thermochemical supporting studies are reported.

  20. Component Fragility Research Program: Phase 1, Demonstration tests: Volume 1, Summary report

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.; Shipway, G.D.; Glozman, V.

    1987-08-01

    This report describes tests performed in Phase I of the NRC Component Fragility Research Program. The purpose of these tests was to demonstrate procedures for characterizing the seismic fragility of a selected component, investigating how various parameters affect fragility, and finally using test data to develop practical fragility descriptions suitable for application in probabilistic risk assessments. A three-column motor control center housing motor controllers of various types and sizes as well as relays of different types and manufacturers was subjected to seismic input motions up to 2.5g zero period acceleration. To investigate the effect of base flexibility on the structural behavior of the MCC and on the functional behavior of the electrical devices, multiple tests were performed on each of four mounting configurations: four bolts per column with top bracking, four bolts per column with no top brace, four bolts per column with internal diagonal bracking, and two bolts per column with no top or internal bracking. Device fragility was characterized by contact chatter correlated to local in-cabinet response at the device location. Seismic capacities were developed for each device on the basis of local input motion required to cause chatter; these results were then applied to develop probabilistic fragility curves for each type of device, including estimates of the ''high-confidence low probability of failure'' capacity of each

  1. EBRPOCO - a program to calculate detailed contributions of power reactivity components of EBR-II

    International Nuclear Information System (INIS)

    Meneghetti, D.; Kucera, D.A.

    1981-01-01

    The EBRPOCO program has been developed to facilitate the calculations of the power coefficients of reactivity of EBR-II loadings. The program enables contributions of various components of the power coefficient to be delineated axially for every subassembly. The program computes the reactivity contributions of the power coefficients resulting from: density reduction of sodium coolant due to temperature; displacement of sodium coolant by thermal expansions of cladding, structural rods, subassembly cans, and lower and upper axial reflectors; density reductions of these steel components due to temperature; displacement of bond-sodium (if present) in gaps by differential thermal expansions of fuel and cladding; density reduction of bond-sodium (if present) in gaps due to temperature; free axial expansion of fuel if unrestricted by cladding or restricted axial expansion of fuel determined by axial expansion of cladding. Isotopic spatial contributions to the Doppler component my also be obtained. (orig.) [de

  2. 25 CFR 170.623 - How are IRR Program projects and activities included in a self-governance agreement?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How are IRR Program projects and activities included in a self-governance agreement? 170.623 Section 170.623 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE... self-governance agreement? To include an IRR Program project or activity in a self-governance agreement...

  3. 12 CFR 303.46 - Financial education programs that include the provision of bank products and services.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Financial education programs that include the provision of bank products and services. 303.46 Section 303.46 Banks and Banking FEDERAL DEPOSIT INSURANCE... Branches and Offices § 303.46 Financial education programs that include the provision of bank products and...

  4. Radiation Effects and Component Hardening testing program at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Draper, J.V.; Weil, B.S.; Chesser, J.B.

    1993-01-01

    This paper describes Phase II of the Radiation Effects and Component Hardening (REACH) testing program, performed as part of the joint collaborative agreement between the United States Department of Energy (USDOE) and the Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan, Components and materials were submitted to 10 5 R/hr gamma radiation fields for 10,000 hr, producing accumulated doses of 10 9 R; most performed as expected

  5. The effectiveness of a cardiometabolic prevention program in general practices offering integrated care programs including a patient tailored lifestyle treatment.

    NARCIS (Netherlands)

    Hollander, M.; Eppink, L.; Nielen, M.; Badenbroek, I.; Stol, D.; Schellevis, F.; Wit, N. de

    2016-01-01

    Background & Aim: Selective cardio-metabolic prevention programs (CMP) may be especially effective in well-organized practices. We studied the effect of a CMP program in the academic primary care practices of the Julius Health Centers (JHC) that offer integrated cardiovascular disease management

  6. Slender body theory programmed for bodies with arbitrary cross section. [including fuselages

    Science.gov (United States)

    Werner, J.; Krenkel, A. R.

    1978-01-01

    A computer program developed for determining the subsonic pressure, force, and moment coefficients for a fuselage-type body using slender body theory is described. The program is suitable for determining the angle of attack and sideslipping characteristics of such bodies in the linear range where viscous effects are not predominant. Procedures developed which are capable of treating cross sections with corners or regions of large curvature are outlined.

  7. Youth and Families with Promise: A Multi-Component Youth Development Program

    Directory of Open Access Journals (Sweden)

    Brian J. Higginbotham

    2007-03-01

    Full Text Available Integrating mentoring into existing youth programs has been suggested as a promising approach to youth development. This article discusses a theoretical rationale underlying the integration of one-on-one mentoring into established youth development programs. From an ecological perspective, the addition of mentoring into traditional programs should theoretically enhance the youth development experience. Mentoring, in addition to programs like 4-H, enriches the context in which developing youth are supported and encouraged by non-parental adults to develop competencies, to take on leadership responsibilities, and to integrate into positive peer groups (i.e., 4-H clubs. A multi-component program that involves at-risk youth in both mentoring and 4-H activities is highlighted. Results from at-risk youth and their parents indicate that Utah’s 4-H/ Mentoring: Youth and Families with Promise program strengthens the protective factors of academic achievement, social competence, and family bonds.

  8. The Use of Workforce Assessment as a Component of Career and Technical Education Program Evaluation

    Science.gov (United States)

    Bartlett, Kenneth R.; Schleif, Nicole L.; Bowen, Mauvalyn M.

    2011-01-01

    This research project examined the extent to which Career and Technical Education (CTE)-related programs use workforce needs assessment as a component of their evaluation activities. An employer perspective was used to develop a conceptual framework drawing on strategic human resource management theory. The extent and methods utilized for…

  9. Structuring Serendipity: Mentoring as a Component of Leadership Development Programs in Higher Education

    Science.gov (United States)

    Bonebright, Denise A.

    2014-01-01

    The need to develop a pool of well-qualified future leaders is a key concern for human resource development scholars and practitioners in higher education. Research indicates that formal leadership development programs are most effective when they are based on experiential models. Mentoring is one experiential component that can enhance such…

  10. 4-H Programs with a Focus on Including Youth with Disabilities.

    Science.gov (United States)

    Stumpf, Mitzi; Henderson, Karla; Luken, Karen; Bialeschki, Deb; Casey, Mary, II

    2002-01-01

    Intentionally Inclusive 4-H Club Programs is a pilot project intended to create accessible 4-H environments for people with disabilities. An experiential curriculum for 9-12 year-olds was developed and used in three North Carolina counties. Formative evaluation showed how 4-H staff are raising awareness and involving youth and volunteers with…

  11. Simulated selection responses for breeding programs including resistance and resilience to parasites in Creole goats

    NARCIS (Netherlands)

    Gunia, M.; Phocas, F.; Gourdine, J.L.; Bijma, P.; Mandonnet, N.

    2013-01-01

    The Creole goat is a local breed used for meat production in Guadeloupe (French West Indies). As in other tropical countries, improvement of parasite resistance is needed. In this study, we compared predicted selection responses for alternative breeding programs with or without parasites resistance

  12. Including an Exam P/1 Prep Course in a Growing Actuarial Science Program

    Science.gov (United States)

    Wakefield, Thomas P.

    2014-01-01

    The purpose of this article is to describe the actuarial science program at our university and the development of a course to enhance students' problem solving skills while preparing them for Exam P/1 of the Society of Actuaries (SOA) and the Casualty Actuary Society (CAS). The Exam P/1 prep course, formally titled Mathematical Foundations of…

  13. Including a Programming Course in General Education: Are We Doing Enough?

    Science.gov (United States)

    Ferguson, Roger C.; Leidig, Paul M.; Reynolds, John H.

    2015-01-01

    General education is more than a list of required courses a student must take to complete their degree. For most universities, general education is the groundwork for the student's university experience. These courses span multiple disciplines and allow students to experience a wide range of topics on their path to graduation. Programming classes,…

  14. 38 CFR 21.7120 - Courses included in programs of education.

    Science.gov (United States)

    2010-07-01

    ... officiating, or other sport or athletic courses, except courses of applied music, physical education, or... programs of education. 21.7120 Section 21.7120 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION All Volunteer Force Educational...

  15. Millennial and Non-Millennial Agriculture Teachers' Current and Ideal Emphasis on the Three Components of the Agricultural Education Program

    Science.gov (United States)

    Shoulders, Catherine W.; Toland, Hannah

    2017-01-01

    Classroom and laboratory instruction, FFA, and SAE have long represented the complete agricultural education program via the three-component model. While the model depicts three circles of equal size to represent these components, the focus and level of emphasis of each component within the agriculture program is the decision of the agriculture…

  16. Program plan for environmental qualification of mechanical and dynamic (including seismic) qualification of mechanical and electrical equipment program (EDQP)

    International Nuclear Information System (INIS)

    Weidenhamer, G.H.

    1986-06-01

    The equipment qualification program described in this plan is intended to provide the technical basis for resolving uncertainties in existing equipment qualification standards. In addition, research results are contributing to the resolution of safety issues GI-23, GI-87, USI-A44, titled, ''Reactor Coolant Pump Seal Failure,'' ''Failure of HPCI Steam Line Without Isolation,'' and ''Station Blackout,'' respectively. Also, research effort is being directed at providing information on the behavior of containment isolation valves under severe accident environments. Although the results of the latter research will not contribute to resolving uncertainties in qualification standards, it has proven cost effective to obtain this information under this program

  17. Public commitment, resistance to advertising, and leisure promotion in a school-based drug abuse prevention program: a component dismantling study.

    Science.gov (United States)

    Hernández-Serrano, Olga; Griffin, Kenneth W; García-Fernández, José Manuel; Orgilés, Mireia; Espada, José P

    2013-01-01

    The objective of the present study was to examine the contribution of three intervention components (public commitment, resistance to advertising, and leisure promotion) on alcohol and protective variables in a school-based substance use prevention program. Participants included 480 Spanish students aged from 14 to 16 who received the Saluda prevention program in one of the following five experimental conditions: complete program, program minus public commitment, program minus resistance to advertising, program minus leisure promotion, and a waiting-list control. The students completed self-report surveys at pretest, posttest, and 6-month follow-up assessments. When excluding the healthy leisure promotion component, the Saluda program showed no loss of efficacy neither on alcohol use nor on other substance-related variables, while public commitment and resistance to advertising improved the aforementioned program's efficacy.

  18. FAILPROB-A Computer Program to Compute the Probability of Failure of a Brittle Component; TOPICAL

    International Nuclear Information System (INIS)

    WELLMAN, GERALD W.

    2002-01-01

    FAILPROB is a computer program that applies the Weibull statistics characteristic of brittle failure of a material along with the stress field resulting from a finite element analysis to determine the probability of failure of a component. FAILPROB uses the statistical techniques for fast fracture prediction (but not the coding) from the N.A.S.A. - CARES/life ceramic reliability package. FAILPROB provides the analyst at Sandia with a more convenient tool than CARES/life because it is designed to behave in the tradition of structural analysis post-processing software such as ALGEBRA, in which the standard finite element database format EXODUS II is both read and written. This maintains compatibility with the entire SEACAS suite of post-processing software. A new technique to deal with the high local stresses computed for structures with singularities such as glass-to-metal seals and ceramic-to-metal braze joints is proposed and implemented. This technique provides failure probability computation that is insensitive to the finite element mesh employed in the underlying stress analysis. Included in this report are a brief discussion of the computational algorithms employed, user instructions, and example problems that both demonstrate the operation of FAILPROB and provide a starting point for verification and validation

  19. [Productivity of doctoral programs in Psychology with Quality Mention in journal articles included in Journal Citation Reports].

    Science.gov (United States)

    Musi-Lechuga, Bertha; Olivas-Ávila, José; Castro, Angel

    2011-08-01

    The main objective of the present study was to classify doctoral programs with Quality Mention in Psychology based on their scientific productivity. For this purpose, articles in the Web of Science published by professors teaching in these doctoral programs were analyzed. In addition, we analyzed scientific journals in which these professors tend to publish more papers and the evolution in the number of papers published until 2009. Results showed that the most productive doctoral program was the Neurosciences program at the University of Oviedo. This program showed a ratio of 40 articles--published in journals included in Journal Citation Reports--by each professor. In contrast, other programs did not reach a ratio of 10 articles per professor. Regarding journals, results showed that 9 out of the 20 most popular journals are Hispanic and a gradual increase in the number of published papers was also observed. Lastly, results and implications for quality assessment are discussed.

  20. Including everyone: A peer learning program that works for under-represented minorities?

    Directory of Open Access Journals (Sweden)

    Jacques van der Meer

    2013-04-01

    Full Text Available Peer learning has long been recognised as an effective way to induct first-year students into the academic skills required to succeed at university. One recognised successful model that has been extensively researched is the Supplemental Instruction (SI model; it has operated in the US since the mid-1970s. This model is commonly known in Australasia as the Peer Assisted Study Sessions (PASS program. Although there is a considerable amount of research into SI and PASS, very little has been published about the impact of peer learning on different student groups, for example indigenous and other ethnic groups. This article reports on the results from one New Zealand university of the effectiveness of PASS for Māori and Pasifika students. The questions this article seeks to address are whether attendance of the PASS program results in better final marks for these two groups of students, and whether the number of sessions attended has an impact on the final marks.

  1. BWR Refill-Reflood Program, Task 4.7 - model development: TRAC-BWR component models

    International Nuclear Information System (INIS)

    Cheung, Y.K.; Parameswaran, V.; Shaug, J.C.

    1983-09-01

    TRAC (Transient Reactor Analysis Code) is a computer code for best-estimate analysis for the thermal hydraulic conditions in a reactor system. The development and assessment of the BWR component models developed under the Refill/Reflood Program that are necessary to structure a BWR-version of TRAC are described in this report. These component models are the jet pump, steam separator, steam dryer, two-phase level tracking model, and upper-plenum mixing model. These models have been implemented into TRAC-B02. Also a single-channel option has been developed for individual fuel-channel analysis following a system-response calculation

  2. Nuclear data libraries for gamma analysis programs, including special purpose libraries

    International Nuclear Information System (INIS)

    Westmeier, W.; Reus, U.; Siemon, K.; Westmeier, H.

    2002-01-01

    A complete set of gamma ray and other data relating to the decay of all known nuclides has been compiled from the literature and electronic sources. The data were critically reviewed, evaluated and the consistency was checked. The total catalogue is comprised of data-sets for 3841 nuclides and isomers with 106,355 gamma ray and 19,347 X ray entries. A subset of 1,627 nuclides with 32,456 gamma ray entries is extracted into a database, which provides the basis for the generation of nuclide libraries for the application in spectrometry programmes. The WINDOWS based program NUC M AN was developed which serves for the updating and editing of the database as well as the generation of task-specific user libraries for special purposes. The literature cut-off date for this catalogue is January 1, 1998. (author)

  3. 30 CFR 250.415 - What must my casing and cementing programs include?

    Science.gov (United States)

    2010-07-01

    ... included in API RP 65, Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells... and are in either of the following two areas: (1) An “area with an unknown shallow water flow potential” is a zone or geologic formation where neither the presence nor absence of potential for a shallow...

  4. 42 CFR 137.275 - May Self-Governance Tribes include IHS construction programs in a construction project agreement...

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false May Self-Governance Tribes include IHS construction... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Purpose and Scope § 137.275 May Self-Governance Tribes include IHS construction programs in a construction project agreement or in a funding...

  5. Advanced theoretical and experimental studies in automatic control and information systems. [including mathematical programming and game theory

    Science.gov (United States)

    Desoer, C. A.; Polak, E.; Zadeh, L. A.

    1974-01-01

    A series of research projects is briefly summarized which includes investigations in the following areas: (1) mathematical programming problems for large system and infinite-dimensional spaces, (2) bounded-input bounded-output stability, (3) non-parametric approximations, and (4) differential games. A list of reports and papers which were published over the ten year period of research is included.

  6. 34 CFR 611.2 - What management plan must be included in a Teacher Quality Enhancement Grants Program application?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What management plan must be included in a Teacher... TEACHER QUALITY ENHANCEMENT GRANTS PROGRAM General Provisions § 611.2 What management plan must be... appropriate, a management plan that includes a proposed multiyear workplan. (b) At a minimum, this workplan...

  7. Purification of Peptide Components including Melittin from Bee Venom using gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis

    Directory of Open Access Journals (Sweden)

    Young Chon Choi

    2006-06-01

    Full Text Available Objectives : This study was conducted to carry out Purification of Melittin and other peptide components from Bee Venom using gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis Methods : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. Results : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. The fractions obtained from gel filtration chromatography was analyzed by using SDS-PAGE and propionic acid/urea polyacrylamide gel electrophoresis. The melittin obtained from the gel filtration contained residual amount of phospholipase A2 and a protein with molecular weight of 6,000. The contaminating proteins were removed by the second gel filtration chromatography. Conclusion : Gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis are useful to separate peptide components including melittin from bee venom.

  8. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

    OpenAIRE

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-01-01

    Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Onl...

  9. Cellular Components, Including Stem-Like Cells, of Preterm Mother's Mature Milk as Compared with Those in Her Colostrum: A Pilot Study.

    Science.gov (United States)

    Kaingade, Pankaj; Somasundaram, Indumathi; Sharma, Akshita; Patel, Darshan; Marappagounder, Dhanasekaran

    2017-09-01

    Whether the preterm mothers' mature milk retains the same cellular components as those in colostrum including stem-like cell, cell adhesion molecules, and immune cells. A total of five preterm mothers were recruited for the study having an average age of 30.2 years and gestational age of 29.8 weeks from the Pristine Women's Hospital, Kolhapur. Colostrum milk was collected within 2-5 days and matured milk was collected 20-30 days after delivery from the same mothers. Integral cellular components of 22 markers including stem cells, immune cells, and cell adhesion molecules were measured using flowcytometry. Preterm mature milk was found to possess higher expressions of hematopoietic stem cells, mesenchymal stem-like cells, immune cells, few cell adhesion molecules, and side population cells than colostrum. The increased level of these different cell components in mature milk may be important in the long-term preterm baby's health growth. Further similar research in a larger population of various gestational ages and lactation stages of preterm mothers is warranted to support these pilot findings.

  10. Palliative sedation for cancer patients included in a home care program: a retrospective study.

    Science.gov (United States)

    Calvo-Espinos, Claudio; Ruiz de Gaona, Estefania; Gonzalez, Cristina; Ruiz de Galarreta, Lucia; Lopez, Cristina

    2015-06-01

    Palliative sedation is a common treatment in palliative care. The home is a difficult environment for research, and there are few studies about sedation at home. Our aim was to analyze this practice in a home setting. We conducted a retrospective cross-sectional descriptive study in a home cohort during 2011. The inclusion criteria were as follows: 18 years or older and enrolled in the Palliative Home Care Program (PHCP) with advanced cancer. The variables employed were: sex, age, primary tumor location, and place of death. We also registered indication, type, drug and dose, awareness of diagnosis and prognosis, consent, survival, presence or absence of rales, painful mouth, and ulcers in patients sedated at home. We also collected the opinions of family members and professionals about the suffering of sedated patients. A total of 446 patients (56% at home) of the 617 admitted to the PHCP between January and December of 2011 passed away. The typical patient in our population was a 70-year-old man with a lung tumor. Some 35 (14%) home patients required sedation, compared to 93 (49%) at the hospital. The most frequent indication was delirium (70%), with midazolam the most common drug (mean dose, 40 mg). Survival was around three days. Rales were frequent (57%) as well as awareness of diagnosis and prognosis (77 and 71%, respectively). Perception of suffering after sedation was rare among relatives (17%) and professionals (8%). In most cases, the decision was made jointly by professionals and family members. Our study confirmed the role of palliative sedation as an appropriate therapeutic tool in the home environment.

  11. A Call to Include Severe Combined Immunodeficiency in Newborn Screening Program

    Directory of Open Access Journals (Sweden)

    Raz Somech

    2014-01-01

    Full Text Available Quantification of the T cell receptor excision circles (TRECs has recently emerged as a useful non-invasive clinical and research tool to investigate thymic activity. It allows the identification of T cell production by the thymus. Quantification of TREC copies has recently been implemented as the preferred test to screen neonates with severe combined immunodeficiency (SCID or significant lymphopenia. Neonatal genetic screening for SCID is highly important in countries with high rates of consanguinous marriages, such as Israel, and can be used for early diagnosis, enabling prompt therapeutic intervention that will save lives and improve the outcome of these patients. TREC measurement is also applicable in clinical settings where T cell immunity is involved, including any T cell immunodeficiencies, HIV infection, the aging process, autoimmune diseases, and immune reconstitution after bone marrow transplantation.

  12. Structural aging program to assess the adequacy of critical concrete components in nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.; Marchbanks, M.F.; Oland, C.B.; Arndt, E.G.

    1989-01-01

    The Structural Aging (SAG) Program is carried out by the Oak Ridge National Laboratory (ORNL) under sponsorship of the United States Nuclear Regulatory Commission (USNRC). The Program has evolved from preliminary studies conducted to evaluate the long-term environmental challenges to light-water reactor safety-related concrete civil structures. An important conclusion of these studies was that a damage methodology, which can provide a quantitative measure of a concrete structure's durability with respect to potential future requirements, needs to be developed. Under the SAG Program, this issue is being addressed through: establishment of a structural materials information center, evaluation of structural component assessment and repair technologies, and development of a quantitative methodology for structural aging determinations. Progress to date of each of these activities is presented as well as future plans. 7 refs., 5 figs

  13. Recommendations for strengthening the infrared technology component of any condition monitoring program

    Science.gov (United States)

    Nicholas, Jack R., Jr.; Young, R. K.

    1999-03-01

    This presentation provides insights of a long term 'champion' of many condition monitoring technologies and a Level III infra red thermographer. The co-authors present recommendations based on their observations of infra red and other components of predictive, condition monitoring programs in manufacturing, utility and government defense and energy activities. As predictive maintenance service providers, trainers, informal observers and formal auditors of such programs, the co-authors provide a unique perspective that can be useful to practitioners, managers and customers of advanced programs. Each has over 30 years experience in the field of machinery operation, maintenance, and support the origins of which can be traced to and through the demanding requirements of the U.S. Navy nuclear submarine forces. They have over 10 years each of experience with programs in many different countries on 3 continents. Recommendations are provided on the following: (1) Leadership and Management Support (For survival); (2) Life Cycle View (For establishment of a firm and stable foundation for a program); (3) Training and Orientation (For thermographers as well as operators, managers and others); (4) Analyst Flexibility (To innovate, explore and develop their understanding of machinery condition); (5) Reports and Program Justification (For program visibility and continued expansion); (6) Commitment to Continuous Improvement of Capability and Productivity (Through application of updated hardware and software); (7) Mutual Support by Analysts (By those inside and outside of the immediate organization); (8) Use of Multiple Technologies and System Experts to Help Define Problems (Through the use of correlation analysis of data from up to 15 technologies. An example correlation analysis table for AC and DC motors is provided.); (9) Root Cause Analysis (Allows a shift from reactive to proactive stance for a program); (10) Master Equipment Identification and Technology Application (To

  14. Estimation of Genetic Variance Components Including Mutation and Epistasis using Bayesian Approach in a Selection Experiment on Body Weight in Mice

    DEFF Research Database (Denmark)

    Widyas, Nuzul; Jensen, Just; Nielsen, Vivi Hunnicke

    Selection experiment was performed for weight gain in 13 generations of outbred mice. A total of 18 lines were included in the experiment. Nine lines were allotted to each of the two treatment diets (19.3 and 5.1 % protein). Within each diet three lines were selected upwards, three lines were...... selected downwards and three lines were kept as controls. Bayesian statistical methods are used to estimate the genetic variance components. Mixed model analysis is modified including mutation effect following the methods by Wray (1990). DIC was used to compare the model. Models including mutation effect...... have better fit compared to the model with only additive effect. Mutation as direct effect contributes 3.18% of the total phenotypic variance. While in the model with interactions between additive and mutation, it contributes 1.43% as direct effect and 1.36% as interaction effect of the total variance...

  15. Implementation and evaluation of a simulation curriculum for paediatric residency programs including just-in-time in situ mock codes.

    Science.gov (United States)

    Sam, Jonathan; Pierse, Michael; Al-Qahtani, Abdullah; Cheng, Adam

    2012-02-01

    To develop, implement and evaluate a simulation-based acute care curriculum in a paediatric residency program using an integrated and longitudinal approach. Curriculum framework consisting of three modular, year-specific courses and longitudinal just-in-time, in situ mock codes. Paediatric residency program at BC Children's Hospital, Vancouver, British Columbia. The three year-specific courses focused on the critical first 5 min, complex medical management and crisis resource management, respectively. The just-in-time in situ mock codes simulated the acute deterioration of an existing ward patient, prepared the actual multidisciplinary code team, and primed the surrounding crisis support systems. Each curriculum component was evaluated with surveys using a five-point Likert scale. A total of 40 resident surveys were completed after each of the modular courses, and an additional 28 surveys were completed for the overall simulation curriculum. The highest Likert scores were for hands-on skill stations, immersive simulation environment and crisis resource management teaching. Survey results also suggested that just-in-time mock codes were realistic, reinforced learning, and prepared ward teams for patient deterioration. A simulation-based acute care curriculum was successfully integrated into a paediatric residency program. It provides a model for integrating simulation-based learning into other training programs, as well as a model for any hospital that wishes to improve paediatric resuscitation outcomes using just-in-time in situ mock codes.

  16. Experiences of Students with Specific Learning Disorder (Including ADHD) in Online College Degree Programs: A Phenomenological Study

    Science.gov (United States)

    Bunch, Seleta LeAnn

    2016-01-01

    Enrollment in online degree programs is rapidly expanding due to the convenience and affordability offered to students and improvements in technology. The purpose of this hermeneutical phenomenological study was to understand the shared experiences of students with documented specific learning disorders (including Attention-Deficit/Hyperactivity…

  17. 45 CFR 287.130 - Can NEW Program activities include job market assessments, job creation and economic development...

    Science.gov (United States)

    2010-10-01

    ... assessments, job creation and economic development activities? 287.130 Section 287.130 Public Welfare... creation and economic development activities? (a) A Tribe may conduct job market assessments within its NEW Program. These might include the following: (1) Consultation with the Tribe's economic development staff...

  18. 41 CFR 105-74.215 - What must I include in my drug-free awareness program?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What must I include in my drug-free awareness program? 105-74.215 Section 105-74.215 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION...

  19. Applications of ultrasonic phased array technique during fabrication of nuclear tubing and other components for the Indian nuclear power program

    International Nuclear Information System (INIS)

    Kapoor, K.

    2015-01-01

    Ultrasonic phased array technique has been applied in fabrication of nuclear fuel and structural at NFC. The integrity of the nuclear fuel and structural components is most crucial as they are exposed to severe environment during operation leading to rapid degradation of its properties during its lifecycle. Nuclear Fuel Complex has mandate for the fabrication of the nuclear fuel and core structurals for Indian PHWRs/BWR, sub-assemblies for the PFBR and steam generator tubing for PFBR and PHWRs which are the most critical materials for the Indian Nuclear Power program. NDE during fabrication of these materials is thus most crucial as it provides the confidence to the designer for safe operation during its lifetime. Many of these techniques have to be developed in-house to meet unique requirements of high sensitivity, resolution and shape of the components. Some of the advancements in the NDE during the fabrication include use of ultrasonic phased array which is detailed in this paper

  20. Formative Evaluation of the Behavior Change Components within a Colorado Weatherization Assistance Program

    Science.gov (United States)

    Sandoval, Perla K.

    A formative evaluation of behavior change elements of an ongoing Weatherization Assistance Program (WAP) offered by the Energy Resource Center (E.R.C.) in Denver, CO was conducted. The WAP as administered by the E.R.C. in Colorado saves residents an average 15% of energy consumption (E.R.C., 2015). However, research suggests that adding behavioral components to WAPs could increase energy savings to 21-26% (Gregory, 1992; APPRAISE, 2002). The goal of this evaluation is to provide recommendations to E.R.C. for program changes using Community Based Social Marketing (CBSM) and Theory of Planned Behavior. The CBSM Step 1- Step 3 is the focus of this formative evaluation. This program evaluation has four components: 1) review of written materials, 2) interviews with staff, 3) surveys mailed to E.R.C. clients and 4) in-home observations conducted with E.R.C. clients. Results of this formative evaluation has 3 sections of behaviors recommended for future intervention high priority, mid priority, and low priority recommendations based on CBSM penetration, probability, and impact factors. Behaviors that are listed as high priority for E.R.C. Behavioral intervention are cold water washing, hang drying, setting back thermostats, and window coverings. Overall increase in staff engagement is also recommended to be pursued. Each staff level is also given recommendations on how to engage in behavior change interventions.

  1. Nuclear Plant Aging Research (NPAR) program plan: Components, systems, and structures

    International Nuclear Information System (INIS)

    1987-09-01

    The nuclear plant aging research described in this plan is intended to resolve issues related to the aging and service wear of equipment and systems and major components at commercial reactor facilities and their possible impact on plant safety. Emphasis has been placed on identification and characterization of the mechanisms of material and component degradation during service and evaluation of methods of inspection, surveillance, condition monitoring, and maintenance as means of mitigating such effects. Specifically, the goals of the program are as follows: (1) to identify and characterize aging and service wear effects which, if unchecked, could cause degradation of equipment, a systems, and major components and thereby impair plant safety; (2) to identify methods of inspection, surveillance, and monitoring, or of evaluating residual life of equipment, systems, and major components, which will ensure timely detection of significant aging effects prior to loss of safety function; and (3) to evaluate the effectiveness of storage, maintenance, repair, and replacement practices in mitigating the rate and extent of degradation caused by aging and service wear

  2. Perceived helpfulness of the individual components of a behavioural weight loss program: results from the Hopkins POWER Trial

    OpenAIRE

    Dalcin, A. T.; Jerome, G. J.; Fitzpatrick, S. L.; Louis, T. A.; Wang, N?Y.; Bennett, W. L.; Durkin, N.; Clark, J. M.; Daumit, G. L.; Appel, L. J.; Coughlin, J. W.

    2015-01-01

    Summary Background Behavioural weight loss programs are effective first?line treatments for obesity and are recommended by the US Preventive Services Task Force. Gaining an understanding of intervention components that are found helpful by different demographic groups can improve tailoring of weight loss programs. This paper examined the perceived helpfulness of different weight loss program components. Methods Participants (n?=?236) from the active intervention conditions of the Practice?bas...

  3. Algorithms and programs for evaluating fault trees with multi-state components

    International Nuclear Information System (INIS)

    Wickenhaeuser, A.

    1989-07-01

    Part 1 and 2 of the report contain a summary overview of methods and algorithms for the solution of fault tree analysis problems. The following points are treated in detail: Treatment of fault tree components with more than two states. Acceleration of the solution algorithms. Decomposition and modularization of extensive systems. Calculation of the structural function and the exact occurrence probability. Treatment of statistical dependencies. A flexible tool to be employed in solving these problems is the method of forming Boolean variables with restrictions. In this way, components with more than two states can be treated, the possibilities of forming modules expanded, and statistical dependencies treated. Part 3 contains descriptions of the MUSTAFA, MUSTAMO, PASPI, and SIMUST computer programs based on these methods. (orig./HP) [de

  4. The Feed Materials Program of the Manhattan Project: A Foundational Component of the Nuclear Weapons Complex

    Science.gov (United States)

    Reed, B. Cameron

    2014-12-01

    The feed materials program of the Manhattan Project was responsible for procuring uranium-bearing ores and materials and processing them into forms suitable for use as source materials for the Project's uranium-enrichment factories and plutonium-producing reactors. This aspect of the Manhattan Project has tended to be overlooked in comparison with the Project's more dramatic accomplishments, but was absolutely vital to the success of those endeavors: without appropriate raw materials and the means to process them, nuclear weapons and much of the subsequent cold war would never have come to pass. Drawing from information available in Manhattan Engineer District Documents, this paper examines the sources and processing of uranium-bearing materials used in making the first nuclear weapons and how the feed materials program became a central foundational component of the postwar nuclear weapons complex.

  5. Specific balance training included in an endurance-resistance exercise program improves postural balance in elderly patients undergoing haemodialysis.

    Science.gov (United States)

    Frih, Bechir; Mkacher, Wajdi; Jaafar, Hamdi; Frih, Ameur; Ben Salah, Zohra; El May, Mezry; Hammami, Mohamed

    2018-04-01

    The purpose of this study was to evaluate the effects of 6 months of specific balance training included in endurance-resistance program on postural balance in haemodialysis (HD) patients. Forty-nine male patients undergoing HD were randomly assigned to an intervention group (balance training included in an endurance-resistance training, n = 26) or a control group (resistance-endurance training only, n = 23). Postural control was assessed using six clinical tests; Timed Up and Go test, Tinetti Mobility Test, Berg Balance Scale, Unipodal Stance test, Mini-Balance Evaluation Systems Test and Activities Balance Confidence scale. All balance measures increased significantly after the period of rehabilitation training in the intervention group. Only the Timed Up and Go, Berg Balance Scale, Mini-Balance Evaluation Systems Test and Activities Balance Confidence scores were improved in the control group. The ranges of change in these tests were greater in the balance training group. In HD patients, specific balance training included in a usual endurance-resistance training program improves static and dynamic balance better than endurance-resistance training only. Implications for rehabilitation Rehabilitation using exercise in haemodialysis patients improved global mobility and functional abilities. Specific balance training included in usual endurance resistance training program could lead to improved static and dynamic balance.

  6. Influenza A Virus Hemagglutinin is Required for the Assembly of Viral Components Including Bundled vRNPs at the Lipid Raft

    Directory of Open Access Journals (Sweden)

    Naoki Takizawa

    2016-09-01

    Full Text Available The influenza glycoproteins, hemagglutinin (HA and neuraminidase (NA, which are associated with the lipid raft, have the potential to initiate virion budding. However, the role of these viral proteins in infectious virion assembly is still unclear. In addition, it is not known how the viral ribonucleoprotein complex (vRNP is tethered to the budding site. Here, we show that HA is necessary for the efficient progeny virion production and vRNP packaging in the virion. We also found that the level of HA does not affect the bundling of the eight vRNP segments, despite reduced virion production. Detergent solubilization and a subsequent membrane flotation analysis indicated that the accumulation of nucleoprotein, viral polymerases, NA, and matrix protein 1 (M1 in the lipid raft fraction was delayed without HA. Based on our results, we inferred that HA plays a role in the accumulation of viral components, including bundled vRNPs, at the lipid raft.

  7. Influenza A Virus Hemagglutinin is Required for the Assembly of Viral Components Including Bundled vRNPs at the Lipid Raft.

    Science.gov (United States)

    Takizawa, Naoki; Momose, Fumitaka; Morikawa, Yuko; Nomoto, Akio

    2016-09-10

    The influenza glycoproteins, hemagglutinin (HA) and neuraminidase (NA), which are associated with the lipid raft, have the potential to initiate virion budding. However, the role of these viral proteins in infectious virion assembly is still unclear. In addition, it is not known how the viral ribonucleoprotein complex (vRNP) is tethered to the budding site. Here, we show that HA is necessary for the efficient progeny virion production and vRNP packaging in the virion. We also found that the level of HA does not affect the bundling of the eight vRNP segments, despite reduced virion production. Detergent solubilization and a subsequent membrane flotation analysis indicated that the accumulation of nucleoprotein, viral polymerases, NA, and matrix protein 1 (M1) in the lipid raft fraction was delayed without HA. Based on our results, we inferred that HA plays a role in the accumulation of viral components, including bundled vRNPs, at the lipid raft.

  8. The effect of weight management interventions that include a diet component on weight-related outcomes in pregnant and postpartum women: a systematic review protocol.

    Science.gov (United States)

    Spencer, Lisa; Rollo, Megan; Hauck, Yvonne; MacDonald-Wicks, Lesley; Wood, Lisa; Hutchesson, Melinda; Giglia, Roslyn; Smith, Roger; Collins, Clare

    2015-01-01

    What are the effects of weight management interventions that include a diet component on weight-related outcomes in pregnant and postpartum women?The primary objective of this systematic review is to evaluate the effectiveness of weight management interventions which include a diet component and are aimed at limiting gestational weight gain and postpartum weight retention in women.The second objective of this systematic review is to investigate included intervention components with respect to effect on weight-related outcomes. This may include, but is not limited to: length of intervention, use of face-to-face counselling, group or individual consultations, use of other interventions components including exercise, use of goals and use of support tools like food diaries, coaching, including email or text message support. Around half of all women of reproductive age are either overweight or obese, with women aged 25-34 years having a greater risk of substantial weight gain compared with men of all ages. Excessive gestational weight gain (GWG) and postpartum weight retention (PPWR) may play a significant role in long term obesity. Having one child doubles the five- and 10-year obesity incidence for women, with many women who gain excessive weight during pregnancy remaining obese permanently. Excessive GWG and/or PPWR can also significantly contribute to short- and long-term adverse health outcomes for mother, baby and future pregnancies.Maternal obesity increases the risk of pregnancy related complications such as pre-eclampsia, gestational diabetes mellitus, stillbirth and the rate of caesarean section. Childhood obesity is a further long term complication of maternal obesity for offspring, which may persist in to adulthood. Excess GWG is also a risk factor for PPWR both in the short and long-term. Nehring et al. conducted a meta-analysis with over 65,000 women showing that, compared to women who gained weight within recommendations during pregnancy, women with GWG

  9. Short-term Evaluation of a Comprehensive Education Program Including Inhaler Training and Disease Management on Chronic Obstructive Pulmonary Disease.

    Science.gov (United States)

    Yoo, Kwang Ha; Chung, Wou Young; Park, Joo Hun; Hwang, Sung Chul; Kim, Tae Eun; Oh, Min Jung; Kang, Dae Ryong; Rhee, Chin Kook; Yoon, Hyoung Kyu; Kim, Tae Hyung; Kim, Deog Kyeom; Park, Yong Bum; Kim, Sang Ha; Yum, Ho Kee

    2017-10-01

    Proper education regarding inhaler usage and optimal management of chronic obstructive pulmonary disease (COPD) is essential for effectively treating patients with COPD. This study was conducted to evaluate the effects of a comprehensive education program including inhaler training and COPD management. We enlisted 127 patients with COPD on an outpatient basis at 43 private clinics in Korea. The patients were educated on inhaler usage and disease management for three visits across 2 weeks. Physicians and patients were administered a COPD assessment test (CAT) and questionnaires about the correct usage of inhalers and management of COPD before commencement of this program and after their third visit. The outcomes of 127 COPD patients were analyzed. CAT scores (19.6±12.5 vs. 15.1±12.3) improved significantly after this program (pmanagement and the correct technique for using inhalers than those who did not have improved CAT scores (peducation program including inhaler training and COPD management at a primary care setting improved CAT scores and led to patients' better understanding of COPD management. Copyright©2017. The Korean Academy of Tuberculosis and Respiratory Diseases

  10. Components Needed for the Design of a Sustainable Career and Technical Education Program

    Science.gov (United States)

    Lassiter, Vann Mizzelle

    2012-01-01

    As education has changed to meet the needs of society and has been shaped by the enactment of new laws, various aspects included under the massive umbrella of education have also changed to maintain momentum One such educational program is career and technical education (CTE). Changes to CTE have been made to continually meet the needs of all…

  11. Description of a multifaceted rehabilitation program including overground gait training for a child with cerebral palsy: A case report.

    Science.gov (United States)

    Farrell, Elizabeth; Naber, Erin; Geigle, Paula

    2010-01-01

    This case describes the outcomes of a multifaceted rehabilitation program including body weight-supported overground gait training (BWSOGT) in a nonambulatory child with cerebral palsy (CP) and the impact of this treatment on the child's functional mobility. The patient is a nonambulatory 10-year-old female with CP who during an inpatient rehabilitation stay participated in direct, physical therapy 6 days per week for 5 weeks. Physical therapy interventions included stretching of her bilateral lower extremities, transfer training, bed mobility training, balance training, kinesiotaping, supported standing in a prone stander, two trials of partial weight-supported treadmill training, and for 4 weeks, three to five times per week, engaged in 30 minutes of BWSOGT using the Up n' go gait trainer, Lite Gait Walkable, and Rifton Pacer gait trainer. Following the multifaceted rehabilitation program, the patient demonstrated increased step initiation, increased weight bearing through bilateral lower extremities, improved bed mobility, and increased participation in transfers. The child's Gross Motor Functional Measure (GMFM) scores increased across four dimensions and her Physical Abilities and Mobility Scale (PAMS) increased significantly. This case report illustrates that a multifaceted rehabilitation program including BWSOGT was an effective intervention strategy to improve functional mobility in this nonambulatory child with CP.

  12. Public Commitment, Resistance to Advertising, and Leisure Promotion in a School-Based Drug Abuse Prevention Program: A Component Dismantling Study

    Science.gov (United States)

    Hernández-Serrano, Olga; Griffin, Kenneth W.; García-Fernández, José Manuel; Espada, Mireia; Orgilés José P.

    2013-01-01

    The objective of the present study was to examine the contribution of three intervention components (public commitment, resistance to advertising, and leisure promotion) on alcohol and protective variables in a school-based substance use prevention program. Participants included 480 Spanish students aged from 14 to 16 who received the…

  13. Effects of lifestyle interventions that include a physical activity component in class II and III obese individuals: a systematic review and meta-analysis.

    Directory of Open Access Journals (Sweden)

    Aurélie Baillot

    Full Text Available In class II and III obese individuals, lifestyle intervention is the first step to achieve weight loss and treat obesity-related comorbidities before considering bariatric surgery. A systematic review, meta-analysis, and meta-regression were performed to assess the impact of lifestyle interventions incorporating a physical activity (PA component on health outcomes of class II and III obese individuals.An electronic search was conducted in 4 databases (Medline, Scopus, CINAHL and Sportdiscus. Two independent investigators selected original studies assessing the impact of lifestyle interventions with PA components on anthropometric parameters, cardiometabolic risk factors (fat mass, blood pressure, lipid and glucose metabolism, behaviour modification (PA and nutritional changes, and quality of life in adults with body mass index (BMI ≥ 35 kg/m2. Estimates were pooled using a random-effect model (DerSimonian and Laird method. Heterogeneity between studies was assessed by the Cochran's chi-square test and quantified through an estimation of the I².Of the 3,170 identified articles, 56 met our eligibility criteria, with a large majority of uncontrolled studies (80%. The meta-analysis based on uncontrolled studies showed significant heterogeneity among all included studies. The pooled mean difference in weight loss was 8.9 kg (95% CI, 10.2-7.7; p < 0.01 and 2.8 kg/m² in BMI loss (95% CI, 3.4-2.2; p < 0.01. Long-term interventions produced superior weight loss (11.3 kg compared to short-term (7.2 kg and intermediate-term (8.0 kg interventions. A significant global effect of lifestyle intervention on fat mass, waist circumference, blood pressure, total cholesterol, LDL-C, triglycerides and fasting insulin was found (p<0.01, without significant effect on HDL-C and fasting blood glucose.Lifestyle interventions incorporating a PA component can improve weight and various cardiometabolic risk factors in class II and III obese individuals. However, further

  14. PTA-1 computer program for treating pressure transients in hydraulic networks including the effect of pipe plasticity

    International Nuclear Information System (INIS)

    Youngdahl, C.K.; Kot, C.A.

    1977-01-01

    Pressure pulses in the intermediate sodium system of a liquid-metal-cooled fast breeder reactor, such as may originate from a sodium/water reaction in a steam generator, are propagated through the complex sodium piping network to system components such as the pump and intermediate heat exchanger. To assess the effects of such pulses on continued reliable operation of these components and to contribute to system designs which result in the mitigation of these effects, Pressure Transient Analysis (PTA) computer codes are being developed for accurately computing the transmission of pressure pulses through a complicated fluid transport system, consisting of piping, fittings and junctions, and components. PTA-1 provides an extension of the well-accepted and verified fluid hammer formulation for computing hydraulic transients in elastic or rigid piping systems to include plastic deformation effects. The accuracy of the modeling of pipe plasticity effects on transient propagation has been validated using results from two sets of Stanford Research Institute experiments. Validation of PTA-1 using the latter set of experiments is described briefly. The comparisons of PTA-1 computations with experiments show that (1) elastic-plastic deformation of LMFBR-type piping can have a significant qualitative and quantitative effect on pressure pulse propagation, even in simple systems; (2) classical fluid-hammer theory gives erroneous results when applied to situations where piping deforms plastically; and (3) the computational model incorporated in PTA-1 for predicting plastic deformation and its effect on transient propagation is accurate

  15. Identifying effective components of alcohol abuse prevention programs: effects of fear appeals, message style, and source expertise.

    Science.gov (United States)

    Stainback, R D; Rogers, R W

    1983-04-01

    Despite the importance of alcohol abuse prevention programs, the effectiveness of many components of these programs has not been demonstrated empirically. An experiment tested the efficacy of three components of many prevention programs: fear appeals, one- versus two-sided message style, and the expertise of the source. The persuasive impact of this information was examined on 113 ninth-grade students' intentions to abstain from drinking alcohol while they are teenagers. The results reveal that fear appeals are successful in strengthening students' intentions to refrain from drinking. Implications are discussed for implementing these principles and for designing future investigations of alcohol abuse prevention programs.

  16. Component analysis of a school-based substance use prevention program in Spain: contributions of problem solving and social skills training content.

    Science.gov (United States)

    Espada, José P; Griffin, Kenneth W; Pereira, Juan R; Orgilés, Mireia; García-Fernández, José M

    2012-02-01

    The objective of the present research was to examine the contribution of two intervention components, social skills training and problem solving training, to alcohol- and drug-related outcomes in a school-based substance use prevention program. Participants included 341 Spanish students from age 12 to 15 who received the prevention program Saluda in one of four experimental conditions: full program, social skills condition, problem solving condition, and a wait-list control group. Students completed self-report surveys at the pretest, posttest and 12-month follow-up assessments. Compared to the wait-list control group, the three intervention conditions produced reductions in alcohol use and intentions to use other substances. The intervention effect size for alcohol use was greatest in magnitude for the full program with all components. Problem-solving skills measured at the follow-up were strongest in the condition that received the full program with all components. We discuss the implications of these findings, including the advantages and disadvantages of implementing tailored interventions to students by selecting intervention components after a skills-based needs assessment.

  17. The Component Operational Experience Degradation and Ageing Program (CODAP). Review and lessons learned (2011-2014)

    International Nuclear Information System (INIS)

    Dragea, Tudor; Riznic, Jovica R.

    2015-01-01

    The structural integrity of piping systems is crucial to continuous and safe operation of nuclear power plants. Across all designs, the pressure boundary and its related piping and components, form one of the many levels of defense in the continuous and safe operation of a nuclear power plant. It is therefore necessary to identify, understand, evaluate and catalogue all of the various degradation mechanisms and failures that affect various piping systems and components across all nuclear power plants (NPP's). This need was first recognized in 1994 by the Swedish Nuclear Power Inspectorate (SKI) which launched a five-year Research and Development (R and D) project to explore the viability of creating an international pipe failure database (SKI-PIPE) (Riznic, 2007). The project was considered to be very successful and in 2002, the Organization for Economic Co-operation and Development (OECD) Pipe Failure Data Exchange (OPDE) was created. OPDE was operated under the umbrella of the OECD Nuclear Energy Agency (NEA) and was created in order to produce an international database on the piping service experience applicable to commercial nuclear power plants. After the successful completion of OPDE, the OECD, as well as other international members, agreed to participate in OPDE's successor: the Component Operational Experience Degradation and Ageing Program (CODAP). The objective of CODAP is to collect information on all possible events related to the failure and degradation of passive metallic components in NPP's. With CODAP winding down to the completion of its first phase in December 2014, this report will focus on the conclusions and the lessons learned throughout the many years of CODAP's implementation. There are currently 14 countries participating in CODAP, many of whom are industry leaders (France, Canada, U.S.A., Germany, Japan, Korea etc.). This cooperation on an international scale provides a library of OPerational EXperience (OPEX) for all participating NPP

  18. Heat source component development program. Report for July--December 1978

    International Nuclear Information System (INIS)

    Foster, E.L. Jr.

    1979-01-01

    This is the seventh of a series of reports describing the results of several analytical and experimental programs being conducted at Battelle-Columbus Laboratories to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. Battelle's support of LASL during the current reporting period has been to determine the operational and reentry response of selected heat source trial designs, and their thermal response to a space shuttle solid propellant fire environment. Thermal, ablation, and thermal stress analyses were conducted using two-dimensional modeling techniques previously employed for the analysis of the earlier trial design versions, and modified in part to improve the modeling accuracy. Further modifications were made to improve the modeling accuracy as described herein. Thermal, ablation, and thermal stress analyses were then conducted for the trial design selected by LASL/DOE for more detailed studies using three-dimensional modeling techniques

  19. WIPP/SRL in-situ tests: MIIT program--The effects of metal package components

    International Nuclear Information System (INIS)

    Covington, J.A.; Wicks, G.G.; Molecke, M.A.

    1991-01-01

    The Materials Interface Interactions Tests or MIIT is the largest in-situ testing program in progress, involving burial of many simulated nuclear waste systems and accompanying package components. In MIIT, waste glass samples were fabricated into the shape of 'pineapple slices', polished on one side. Proposed package components were also made into a similar configuration and the various glasses, metals, and geologic samples were than stacked onto heater elements within Teflon assemblies. This produced interactions of interest by creating glass/glass, glass/salt, and glass/metal interfaces. Since the outer diameter of the metal was smaller than the outer diameter of the glass, a lip was created which was also produced a glass/liquid interface, which was also studied. Overall, a total of 50 stacks or assemblies of pineapple slices were created in seven different stacking arrangements. Each individual assembly was then installed in an instrumented borehole at WIPP. Brine was then added to most of boreholes and the assemblies heated and maintained at 90 degrees C. This was achieved by energizing the central heating and rod that traversed through the middle opening of each of the pineapple slices in each assembly. Due to the design of these units, glass, metal and geologic samples could be removed at time intervals of 6 mos., 1 year, 2 years, and 5 years. Currently, all but the 5 year samples have been removed from test and are being evaluated in laboratories of MIIT participants

  20. Research program Integrity of Components (FKS). A substantial contribution to component safety; Forschungsvorhaben Komponentensicherheit (FKS). Ein wesentlicher Beitrag zur Komponentensicherheit

    Energy Technology Data Exchange (ETDEWEB)

    Kussmaul, K.; Roos, E.; Foehl, J.

    1998-11-01

    The main objectives pursued are: (a) verify the quality of reactor pressure vessels in existing LWR-type reactors, and (b) quantify the safety margin using both specified and non-specified materials and welds. On the basis of knowledge obtained through earlier programmes, the research project was to examine in particular deviations from the specified materials properties, for more exact quantification of the safety margin before RPV failure. There are three major factors influencing the component performance until failure, which are aggregate material fatigue, flaws, loading conditions, and the research work was to focus on the materials properties. An item of main interest was to assess the impact of long service life on the materials properties, assuming particularly unfavourable boundary conditions for materials properties and operational loads. (orig./CB) [Deutsch] Die Hauptziele des Forschungsvorhabens Komponentensicherheit waren (a) die Qualitaet bestehender Reaktordruckbehaelter von Leichtwasserreaktoren zu verifizieren, und (b) den Sicherheitsabstand zu quantifizieren unter Verwendung von Werkstoffen und Schweissverbindungen, die innerhalb und ausserhalb der Spezifikation liegen. Gestuetzt auf Erkenntnisse aus frueheren Programmen sollten zur quantitativen Erfassung des Sicherheitsabstandes gegen Versagen des RDB`s insbesondere auch Abweichungen vom spezifikationsgemaessen Werkstoffzustand betrachtet werden. Von den drei Haupteinflussgroessen Werkstoffzustand, Fehlerzustand, Beanspruchungszustand, die das Versagensverhalten bestimmen, lag der Schwerpunkt des FKS auf der Untersuchung des Werkstoffeinflusses. Insbesondere sollte geprueft werden, wie sich der Langzeitbetrieb auf die Aenderung der Werkstoffeigenschaften auswirkt, wenn besonders unguenstige Randbedingungen von Werkstoffzustand und Betriebsbedingungen zugrunde gelegt werden. (orig./MM)

  1. At-Risk Programs for Middle School and High School: Essential Components and Recommendations for Administrators and Teachers.

    Science.gov (United States)

    Bateman, Susan; Karr-Kidwell, PJ

    This paper provides an extensive literature review concerning at-risk students and their needs, identifies the essential components necessary for effective at-risk programming, and describes successful at-risk programs and recommendations for administrators and teachers at the middle- and high-school levels. The literature review presents research…

  2. The Importance and Implementation of Eight Components of College and Career Readiness Counseling in School Counselor Education Programs

    Science.gov (United States)

    Perusse, Rachelle; Poynton, Timothy A.; Parzych, Jennifer L.; Goodnough, Gary E.

    2015-01-01

    School counselor education program administrators (N = 131) responded to an online questionnaire where the importance and extent of implementation of The College Board's National Office of School Counselor Advocacy (NOSCA) Eight Components of College and Career Readiness in their school counselor education program were assessed. The mean…

  3. Evaluation and study of advanced optical contamination, deposition, measurement, and removal techniques. [including computer programs and ultraviolet reflection analysis

    Science.gov (United States)

    Linford, R. M. F.; Allen, T. H.; Dillow, C. F.

    1975-01-01

    A program is described to design, fabricate and install an experimental work chamber assembly (WCA) to provide a wide range of experimental capability. The WCA incorporates several techniques for studying the kinetics of contaminant films and their effect on optical surfaces. It incorporates the capability for depositing both optical and contaminant films on temperature-controlled samples, and for in-situ measurements of the vacuum ultraviolet reflectance. Ellipsometer optics are mounted on the chamber for film thickness determinations, and other features include access ports for radiation sources and instrumentation. Several supporting studies were conducted to define specific chamber requirements, to determine the sensitivity of the measurement techniques to be incorporated in the chamber, and to establish procedures for handling samples prior to their installation in the chamber. A bibliography and literature survey of contamination-related articles is included.

  4. Synthesis and evaluation of the potential deleterious effects of ZnO nanomaterials (nanoneedles and nanoflowers) on blood components, including albumin, erythrocytes and human isolated primary neutrophils

    Energy Technology Data Exchange (ETDEWEB)

    Pastrello, Bruna [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil); Paracatu, Luana Chiquetto [São Paulo State University (UNESP), Department of Clinical Analysis, School of Pharmaceutical Sciences (Brazil); Carvalho Bertozo, Luiza de [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil); Paino, Iêda Maria Martinez [University of São Paulo (USP), Nanomedicine and Nanotoxicology Group, Physics Institute of São Carlos (IFSC) (Brazil); Lisboa-Filho, Paulo Noronha [São Paulo State University (UNESP), Department of Physics, Faculty of Sciences (Brazil); Ximenes, Valdecir Farias, E-mail: vfximenes@fc.unesp.br [São Paulo State University (UNESP), Department of Chemistry, Faculty of Sciences (Brazil)

    2016-07-15

    The application of zinc oxide (ZnO) nanoparticles in biomaterials has increased significantly in the recent years. Here, we aimed to study the potential deleterious effects of ZnO on blood components, including human serum albumin (HSA), erythrocytes and human isolated primary neutrophils. To test the influence of the morphology of the nanomaterials, ZnO nanoneedles (ZnO-nn) and nanoflowers (ZnO-nf) were synthesized. The zeta potential and mean size of ZnO-nf and ZnO-nn suspensions in phosphate-buffered saline were −10.73 mV and 3.81 nm and −5.27 mV and 18.26 nm, respectively. The incubation of ZnO with HSA did not cause its denaturation as verified by the absence of significant alterations in the intrinsic and extrinsic fluorescence and in the circular dichroism spectrum of the protein. The capacity of HSA as a drug carrier was not affected as verified by employing site I and II fluorescent markers. Neither type of ZnO was able to provoke the activation of neutrophils, as verified by lucigenin- and luminol-dependent chemiluminescence and by the extracellular release of hydrogen peroxide. ZnO-nf, but not ZnO-nn, induced the haemolysis of erythrocytes. In conclusion, our results reinforce the concept that ZnO nanomaterials are relatively safe for usage in biomaterials. A potential exception is the capacity of ZnO-nf to promote the lysis of erythrocytes, a discovery that shows the importance of the morphology in the toxicity of nanoparticles.

  5. Trapping of dilute ion components in wells and double wells in higher equatorial magnetic regions: A kinetic theory including collisions, varying background and additional fields

    Energy Technology Data Exchange (ETDEWEB)

    Oeien, Alf H.

    2001-08-01

    The component of the ambipolar field along the magnetic field B, though weak, may, acting together with the gravitational field, give rise to along-B ''ambipolar wells'' where light ions (test particles) in the ionosphere in equatorial regions are trapped. We also take into account magnetic field wells, especially in cases when the along-B velocity of test particles are much less than the transverse-B velocities. For heavy ions, or, for light ions high up, when the ambipolar trap ceases to function, the along-B ambipolar- and gravitational field effects may combine with the magnetic field trap to form a double well for the along-B movement of test particles. The magnetic field trap and its contribution to the double well may be nearly stationary for particles obeying the same velocity condition as above even when collisional effects between the test particles and the background plasma are incorporated. Ions trapped in wells like this, may ''feel'' a varying background, for instance because of Earth rotation, that may be incorporated as time-variation of parameters in the along-B motion. An along-B kinetic equation for groups of test particles is solved both for the case of simple wells and for double wells, including time-varying collisional coefficients and additional fields, and in some cases analytic solutions are obtained. Peculiar along-B distribution functions may arise due to the time-dependency of coefficients and to various combinations of collision- and field parameter values. In particular ''breathing'' distributions that alternate between wide and narrow forms in phase-space may arise, and also distributions where strange attractors may play some role.

  6. Research: Detailed and Selective Follow-up of Students for Improvement of Programs/Program Components in Business & Office Education and Marketing & Distributive Education. Final Report.

    Science.gov (United States)

    Scott, Gary D.; Chapman, Alberta

    The Kentucky student follow-up system was studied to identify the current status of follow-up activities in business and office education and marketing and distributive education; to identify the impact of follow-up data on these programs; to identify program components for which detailed follow-up can provide information to assist in program…

  7. Technical program to study the benefits of nonlinear analysis methods in LWR component designs. Technical report TR-3723-1

    International Nuclear Information System (INIS)

    Raju, P.P.

    1980-05-01

    This report summarizes the results of the study program to assess the benefits of nonlinear analysis methods in Light Water Reactor (LWR) component designs. The current study reveals that despite its increased cost and other complexities, nonlinear analysis is a practical and valuable tool for the design of LWR components, especially under ASME Level D service conditions (faulted conditions) and it will greatly assist in the evaluation of ductile fracture potential of pressure boundary components. Since the nonlinear behavior is generally a local phenomenon, the design of complex components can be accomplished through substructuring isolated localized regions and evaluating them in detail using nonlinear analysis methods

  8. Effect of components of a workplace lactation program on breastfeeding duration among employees of a public-sector employer.

    Science.gov (United States)

    Balkam, Jane A Johnston; Cadwell, Karin; Fein, Sara B

    2011-07-01

    The purpose of this study was to evaluate the impact of the individual services offered via a workplace lactation program of one large public-sector employer on the duration of any breastfeeding and exclusive breastfeeding. Exclusive breastfeeding was defined as exclusive feeding of human milk for the milk feeding. A cross-sectional mailed survey approach was used. The sample (n = 128) consisted of women who had used at least one component of the lactation program in the past 3 years and who were still employed at the same organization when data were collected. Descriptive statistics included frequency distributions and contingency table analysis. Chi-square analysis was used for comparison of groups, and both analysis of variance (ANOVA) and univariate analysis of variance from a general linear model were used for comparison of means. The survey respondents were primarily older, white, married, well-educated, high-income women. More of the women who received each lactation program service were exclusively breastfeeding at 6 months of infant age in all categories of services, with significant differences in the categories of telephone support and return to work consultation. After adjusting for race and work status, logistic regression analysis showed the number of services received was positively related to exclusive breastfeeding at 6 months and participation in a return to work consultation was positively related to any breastfeeding at 6 months. The study demonstrated that the workplace lactation program had a positive impact on duration of breastfeeding for the women who participated. Participation in the telephone support and return to work consultation services, and the total number of services used were related to longer duration of exclusive and/or any breastfeeding.

  9. Structured behavioral observation techniques as components of an effective fitness-for-duty program

    International Nuclear Information System (INIS)

    Hauth, J.T.; Barnes, V.E.; Moore, C.J.; Toquam, J.L.

    1989-01-01

    Performance-based tests are designed to evaluate physical and cognitive performance and have several attractive features that may be useful in nuclear power plant fitness-for-duty programs. Three types of performance-based testing that may eventually be useful in the nuclear power industry are reviewed in this paper: (a) the Los Angeles Police Department's Drug Recognition Expert program, (b) performance assessment batteries, and (c) performance assessment devices. Each of these techniques is evaluated here in terms of the following measures of effectiveness: (1) scope, or the range of potential problems that can be detected; (2) reliability, or the consistency of results; (3) sensitivity, or the ability of the test to detect impairment or the presence of drugs at low levels; (4) specificity, or the ability of the test to correctly identify the source of impairment or the drug present; (5) implementation, or the practicality of using the technique in the nuclear power plant setting. This information analyzed in this paper indicates that although performance and cognitive assessment techniques currently lack the reliability, sensitivity, and specificity of random chemical screening to detect and deter substance abuse, they can address a variety of fitness-for-duty concerns that may not be adequately addressed by a urinalysis testing program alone. These include detection of drug use not detected by urinalysis, psychological stress, or physical injury or illness

  10. A review of a radioactive material shipping container including design, testing, upgrading compliance program and shipping logistics

    International Nuclear Information System (INIS)

    Celovsky, A.; Lesco, R.; Gale, B.; Sypes, J.

    2003-01-01

    Ten years ago Atomic Energy of Canada developed a Type B(U)-85 shipping container for the global transport of highly radioactive materials. This paper reviews the development of the container, including a summary of the design requirements, a review of the selected materials and key design elements, and the results of the major qualification tests (drop testing, fire test, leak tightness testing, and shielding integrity tests). As a result of the testing, improvements to the structural, thermal and containment design were made. Such improvements, and reasons thereof, are noted. Also provided is a summary of the additional analysis work required to upgrade the package from a Type B(U) to a Type B(F), i.e. essentially upgrading the container to include fissile radioisotopes to the authorized radioactive contents list. Having a certified shipping container is only one aspect governing the global shipments of radioactive material. By necessity the shipment of radioactive material is a highly regulated environment. This paper also explores the experiences with other key aspects of radioactive shipments, including the service procedures used to maintain the container certification, the associated compliance program for radioactive material shipments, and the shipping logistics involved in the transport. (author)

  11. Environmental components of OCS policy committee recommendations regarding national oil spill prevention and response program

    International Nuclear Information System (INIS)

    Groat, C.G.; Thorman, J.

    1991-01-01

    The Exxon Valdez oil spill of March 24, 1989 resulted in thousands of pages of analytical reports assessing the environmental, organizational, legal, procedural, social, economic, and political aspects of the event. Even though the accident was a transportation incident, it had a major impact on the public and political perception of offshore oil operations. This caused the OCS Policy Committee, which advises the Secretary of the Interior and the Minerals Management Service on Outer Continental Shelf resource development and environmental matters, to undertake a review of the reports for the purpose of developing recommendations to the secretary for improvements in OCS operations that would insure maximum efforts to prevent spills and optimal ability to deal with any that occur. The Committee felt strongly that 'a credible national spill prevention and response program from both OCS and non-OCS oil spills in the marine environment is needed to create the political climate for a viable OCS program.' The report of the Committee described eight essential elements of this program; four of these focused on the environmental aspects of oil spills, calling for (1) adequate characterization of the marine and coastal environment, including both information and analysis, accessible to decision makers, (2) the capacity to restore economic and environmental resources as quickly as possible if damage occurs, (3) a mechanism for research on oil spill impacts, and (4) a meaningful role for all interested and responsible parties, including the public, in as many of these activities as possible, from spill prevention and contingency planning to environmental oversight of ongoing operations and participation in clean-up and restoration activities

  12. A revised dosimetric characterization of the model S700 electronic brachytherapy source containing an anode-centering plastic insert and other components not included in the 2006 model

    International Nuclear Information System (INIS)

    Hiatt, Jessica R.; Davis, Stephen D.; Rivard, Mark J.

    2015-01-01

    Purpose: The model S700 Axxent electronic brachytherapy source by Xoft, Inc., was characterized by Rivard et al. in 2006. Since then, the source design was modified to include a new insert at the source tip. Current study objectives were to establish an accurate source model for simulation purposes, dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and determine dose differences between the original simulation model and the current model S700 source design. Methods: Design information from measurements of dissected model S700 sources and from vendor-supplied CAD drawings was used to aid establishment of an updated Monte Carlo source model, which included the complex-shaped plastic source-centering insert intended to promote water flow for cooling the source anode. These data were used to create a model for subsequent radiation transport simulations in a water phantom. Compared to the 2006 simulation geometry, the influence of volume averaging close to the source was substantially reduced. A track-length estimator was used to evaluate collision kerma as a function of radial distance and polar angle for determination of TG-43 dosimetry parameters. Results for the 50 kV source were determined every 0.1 cm from 0.3 to 15 cm and every 1° from 0° to 180°. Photon spectra in water with 0.1 keV resolution were also obtained from 0.5 to 15 cm and polar angles from 0° to 165°. Simulations were run for 10 10 histories, resulting in statistical uncertainties on the transverse plane of 0.04% at r = 1 cm and 0.06% at r = 5 cm. Results: The dose-rate distribution ratio for the model S700 source as compared to the 2006 model exceeded unity by more than 5% for roughly one quarter of the solid angle surrounding the source, i.e., θ ≥ 120°. The radial dose function diminished in a similar manner as for an 125 I seed, with values of 1.434, 0.636, 0.283, and 0.0975 at 0.5, 2, 5, and 10 cm, respectively. The radial dose function

  13. A revised dosimetric characterization of the model S700 electronic brachytherapy source containing an anode-centering plastic insert and other components not included in the 2006 model

    Energy Technology Data Exchange (ETDEWEB)

    Hiatt, Jessica R. [Department of Radiation Oncology, Rhode Island Hospital, The Warren Alpert Medical School of Brown University, Providence, Rhode Island 02903 (United States); Davis, Stephen D. [Department of Medical Physics, McGill University Health Centre, Montreal, Quebec H3G 1A4 (Canada); Rivard, Mark J., E-mail: mark.j.rivard@gmail.com [Department of Radiation Oncology, Tufts University School of Medicine, Boston, Massachusetts 02111 (United States)

    2015-06-15

    Purpose: The model S700 Axxent electronic brachytherapy source by Xoft, Inc., was characterized by Rivard et al. in 2006. Since then, the source design was modified to include a new insert at the source tip. Current study objectives were to establish an accurate source model for simulation purposes, dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and determine dose differences between the original simulation model and the current model S700 source design. Methods: Design information from measurements of dissected model S700 sources and from vendor-supplied CAD drawings was used to aid establishment of an updated Monte Carlo source model, which included the complex-shaped plastic source-centering insert intended to promote water flow for cooling the source anode. These data were used to create a model for subsequent radiation transport simulations in a water phantom. Compared to the 2006 simulation geometry, the influence of volume averaging close to the source was substantially reduced. A track-length estimator was used to evaluate collision kerma as a function of radial distance and polar angle for determination of TG-43 dosimetry parameters. Results for the 50 kV source were determined every 0.1 cm from 0.3 to 15 cm and every 1° from 0° to 180°. Photon spectra in water with 0.1 keV resolution were also obtained from 0.5 to 15 cm and polar angles from 0° to 165°. Simulations were run for 10{sup 10} histories, resulting in statistical uncertainties on the transverse plane of 0.04% at r = 1 cm and 0.06% at r = 5 cm. Results: The dose-rate distribution ratio for the model S700 source as compared to the 2006 model exceeded unity by more than 5% for roughly one quarter of the solid angle surrounding the source, i.e., θ ≥ 120°. The radial dose function diminished in a similar manner as for an {sup 125}I seed, with values of 1.434, 0.636, 0.283, and 0.0975 at 0.5, 2, 5, and 10 cm, respectively. The radial dose

  14. A revised dosimetric characterization of the model S700 electronic brachytherapy source containing an anode-centering plastic insert and other components not included in the 2006 model.

    Science.gov (United States)

    Hiatt, Jessica R; Davis, Stephen D; Rivard, Mark J

    2015-06-01

    The model S700 Axxent electronic brachytherapy source by Xoft, Inc., was characterized by Rivard et al. in 2006. Since then, the source design was modified to include a new insert at the source tip. Current study objectives were to establish an accurate source model for simulation purposes, dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and determine dose differences between the original simulation model and the current model S700 source design. Design information from measurements of dissected model S700 sources and from vendor-supplied CAD drawings was used to aid establishment of an updated Monte Carlo source model, which included the complex-shaped plastic source-centering insert intended to promote water flow for cooling the source anode. These data were used to create a model for subsequent radiation transport simulations in a water phantom. Compared to the 2006 simulation geometry, the influence of volume averaging close to the source was substantially reduced. A track-length estimator was used to evaluate collision kerma as a function of radial distance and polar angle for determination of TG-43 dosimetry parameters. Results for the 50 kV source were determined every 0.1 cm from 0.3 to 15 cm and every 1° from 0° to 180°. Photon spectra in water with 0.1 keV resolution were also obtained from 0.5 to 15 cm and polar angles from 0° to 165°. Simulations were run for 10(10) histories, resulting in statistical uncertainties on the transverse plane of 0.04% at r = 1 cm and 0.06% at r = 5 cm. The dose-rate distribution ratio for the model S700 source as compared to the 2006 model exceeded unity by more than 5% for roughly one quarter of the solid angle surrounding the source, i.e., θ ≥ 120°. The radial dose function diminished in a similar manner as for an (125)I seed, with values of 1.434, 0.636, 0.283, and 0.0975 at 0.5, 2, 5, and 10 cm, respectively. The radial dose function ratio between the current

  15. The structural aging assessment program: ranking methodology for CANDU nuclear generating station concrete components

    International Nuclear Information System (INIS)

    Philipose, K.E.; Muhkerjee, P.K.; McColm, E.J.

    1997-01-01

    Most of the major structural components in CANDU nuclear generating stations are constructed of reinforced concrete. Although passive in nature, these structures perform many critical safety functions in the operation of each facility. Aging can affect the structural capacity and integrity of structures. The reduction in capacity due to aging is not addressed in design codes. Thus a program is warranted to monitor the aging of safety-related CANDU plant structures and to prioritize those that require maintenance and repairs. Prioritization of monitoring efforts is best accomplished by focusing on those structures judged to be the most critical to plant performance and safety. The safety significance of each sub-element and its degradation with time can be evaluated using a numerical rating system. This will simplify the utility's efforts, thereby saving maintenance costs while providing a higher degree of assurance that performance is maintained. This paper describes the development of a rating system (ranking procedure) as part of the Plant Life Management of CANDU generating station concrete structures and illustrates its application to an operating plant. (author)

  16. Ahead of the game protocol: a multi-component, community sport-based program targeting prevention, promotion and early intervention for mental health among adolescent males.

    Science.gov (United States)

    Vella, Stewart A; Swann, Christian; Batterham, Marijka; Boydell, Katherine M; Eckermann, Simon; Fogarty, Andrea; Hurley, Diarmuid; Liddle, Sarah K; Lonsdale, Chris; Miller, Andrew; Noetel, Michael; Okely, Anthony D; Sanders, Taren; Telenta, Joanne; Deane, Frank P

    2018-03-21

    There is a recognised need for targeted community-wide mental health strategies and interventions aimed specifically at prevention and early intervention in promoting mental health. Young males are a high need group who hold particularly negative attitudes towards mental health services, and these views are detrimental for early intervention and help-seeking. Organised sports provide a promising context to deliver community-wide mental health strategies and interventions to adolescent males. The aim of the Ahead of the Game program is to test the effectiveness of a multi-component, community-sport based program targeting prevention, promotion and early intervention for mental health among adolescent males. The Ahead of the Game program will be implemented within a sample drawn from community sporting clubs and evaluated using a sample drawn from a matched control community. Four programs are proposed, including two targeting adolescents, one for parents, and one for sports coaches. One adolescent program aims to increase mental health literacy, intentions to seek and/or provide help for mental health, and to decrease stigmatising attitudes. The second adolescent program aims to increase resilience. The goal of the parent program is to increase parental mental health literacy and confidence to provide help. The coach program is intended to increase coaches' supportive behaviours (e.g., autonomy supportive behaviours), and in turn facilitate high-quality motivation and wellbeing among adolescents. Programs will be complemented by a messaging campaign aimed at adolescents to enhance mental health literacy. The effects of the program on adolescent males' psychological distress and wellbeing will also be explored. Organised sports represent a potentially engaging avenue to promote mental health and prevent the onset of mental health problems among adolescent males. The community-based design, with samples drawn from an intervention and a matched control community

  17. Reduction of uncertainties on the components of the reactivity loss per cycle, the Balzac program on Masurca

    International Nuclear Information System (INIS)

    D'Angelo, A.; Karouby-Cohen, N.; Palmiotti, G.; Rimpault, G.; Salvatores, M.; Soule, R.

    1984-10-01

    The uncertainties on the reactivity loss per cycle are mainly due to the uncertainties on the heavy isotopes component. This paper, presents an experimental program for reducing these uncertainties. This program is based on a range of fuel irradiation experiments on power reactor and a range of isotopic variations experiments in the critical facility MASURCA consisting basically of subcritical measurements, from a reference configuration and in several different spectra

  18. Health Games: A Key Component for the Evolution of Wellness Programs.

    Science.gov (United States)

    Lenihan, David

    2012-06-01

    Healthcare cost growth has been a major concern for both governments and employers. Considerable efforts have been made to "bend the trend" or find ways to control costs. At the highest levels, this has been the move from indemnity care models to managed care and then to consumer-directed health models using Healthcare Reimbursement Accounts and Healthcare Spending Accounts in plan designs. Accompanying this move in plan design has been an effort to get the consumer/patient/employee more engaged and responsible for his or her health expenditures, health decision-making, and activities. Consumers have gone through the phases of health being doctor-centric (indemnity care model), to health plan-centric (managed care models), to consumer-centric (consumer-directed health models). There is currently a need to incorporate wellness into the equation. Simply put, wellness is intended to keep people out of the health system by reducing the risk factors that would put them into the system in the first place. This includes things like smoking cessation, exercise, weight management, nutrition, and other factors over which individuals have a significant level of control over, as well as condition management such as medication adherence, and condition monitoring (such as glucose monitoring for diabetics). Wellness will become increasingly more common for major buyers, initially large self-funded employers and then health plans that will offer it as a part of their overall Plan Design and Administration services. Wellness initiatives will also be offered by Federal and State governments and will include programs for the elderly and at-risk populations as well as for the general population. The measure of success of wellness programs to actually "bend the trend" will be engagement. How large a piece of the population can be captured and retained will be the critical metric for success…and metrics require real data and will be used by the entire healthcare value-chain to measure

  19. Postabortion Care: 20 Years of Strong Evidence on Emergency Treatment, Family Planning, and Other Programming Components.

    Science.gov (United States)

    Huber, Douglas; Curtis, Carolyn; Irani, Laili; Pappa, Sara; Arrington, Lauren

    2016-09-28

    Worldwide 75 million women need postabortion care (PAC) services each year following safe or unsafe induced abortions and miscarriages. We reviewed more than 550 studies on PAC published between 1994 and 2013 in the peer-reviewed and gray literature, covering emergency treatment, postabortion family planning, organization of services, and related topics that impact practices and health outcomes, particularly in the Global South. In this article, we present findings from studies with strong evidence that have major implications for programs and practice. For example, vacuum aspiration reduced morbidity, costs, and time in comparison to sharp curettage. Misoprostol 400 mcg sublingually or 600 mcg orally achieved 89% to 99% complete evacuation rates within 2 weeks in multiple studies and was comparable in effectiveness, safety, and acceptability to manual vacuum aspiration. Misoprostol was safely introduced in several PAC programs through mid-level providers, extending services to secondary hospitals and primary health centers. In multiple studies, postabortion family planning uptake before discharge increased by 30-70 percentage points within 1-3 years of strengthening postabortion family planning services; in some cases, increases up to 60 percentage points in 4 months were achieved. Immediate postabortion contraceptive acceptance increased on average from 32% before the interventions to 69% post-intervention. Several studies found that women receiving immediate postabortion intrauterine devices and implants had fewer unintended pregnancies and repeat abortions than those who were offered delayed insertions. Postabortion family planning is endorsed by the professional organizations of obstetricians/gynecologists, midwives, and nurses as a standard of practice; major donors agree, and governments should be encouraged to provide universal access to postabortion family planning. Important program recommendations include offering all postabortion women family planning

  20. Improving the Effectiveness of the Bio-slurry Extension Component of National Biodigester Program in Cambodia

    Energy Technology Data Exchange (ETDEWEB)

    Islam, M. F.

    2009-10-15

    This report deals with the escalating challenge Cambodia faces in its agricultural sector for providing sufficient feeding to an increasing population, while also having improper soil management. Based on field visits, interviews, regular meetings, training workshops, and joint analysis it was revealed that farmers used both organic (bio-slurry) and inorganic fertilisers but were unaware of the balance needed and required doses of fertiliser. Further, it appeared that farmers have limited access to improve crop management practices, specifically to fertiliser management. In a response to the problem, the current weaknesses, and further scope of improvement of present organisational setup of slurry extension component of NBP and subsidy system have been analysed in depth. Extensive recommendations are offered on an organisational setup level (e.g. strengthen the linkage between Provincial Biogas Program Office-PBPO and Cambodian Centre for Study and Development in Agriculture-CEDAC by involving CEDAC in the planning process), subsidy (e.g. provide subsidy to attract farmers for construction of standard compost hut, boundaries and shade), planning (e.g. bottom up planning approach is suggested where a seasonal planning meeting should be organized at province by the project director involving CEDAC provincial coordinator), development of training materials (e.g. a national consultant should be hired for developing a training manual on bio-slurry systems), training (e.g. strengthen user training by increasing its number, frequency, topics), farmers participatory action research (e.g. the participatory approach should be replaced by a demonstration one), monitoring and reporting (e.g. monitoring system should be established as desk and field monitoring)

  1. Should CAM and CAM Training Programs Be Included in the Curriculum of Schools That Provide Health Education?

    Directory of Open Access Journals (Sweden)

    2016-12-01

    Full Text Available Objectives: This study aimed to determine the knowledge levels and attitudes of School of Health and Vocational School of Health students toward complementary and alternative medicine (CAM. Methods: Three hundred thirty-three (333 students studying at the Mehmet Akif Ersoy University School of Health and the Golhisar Vocational School of Health in Burdur, Turkey, were included in the study. Research data were collected by using a survey method based on the expressed opinions of the participants. Results: Of the participants, 69.7% were female and 97% were single (unmarried. Of cigarette users and those with chronic illnesses, 46.8% and 47.8%, respectively, used CAM. Those using CAM were statistically more likely to be female (P < 0.021, to have higher grades (P < 0.007, to be single (P < 0.005, to be vocational school of health graduates (P < 0.008, and to have fathers at work (P < 0.021. While 9.6% of the students thought CAM to be nonsense, 10.8% thought that the methods of CAM should be tried before consulting a doctor. Conclusion: A majority of the students in the study population were found to use complementary and alternative medicine, but that they lacked information about its methods. As a way to address this, CAM should be included in the curriculum of schools that provide health education, and CAM training programs should be given to healthcare professionals to improve their knowledge of CAM. In Turkey, many more studies should be performed to determine nurses’ and doctors’ knowledge of and attitudes about CAM methods so that they can give correct guidance to society and take more active responsibility in improving patient safety.

  2. The right maintenance on the right components, at the right time, with the right parts: maintaining high plant reliability through an effective maintenance program

    International Nuclear Information System (INIS)

    Von Hatten, P.

    2008-01-01

    The objective of the maintenance program at a Nuclear Power Plant is to be proactive and prevent unexpected failures of equipment that can impact on Nuclear or Conventional Safety and Plant Production. This does not mean that all equipment failures will be prevented; in a number of cases the most cost effective solution is to allow equipment to run to failure. Deciding what components are critical to the plant is the first step. The industry uses guidance from INPO Advanced Process, AP913, to classify components as Critical, Non Critical or Run to Failure based on the consequence of the failure. Once this is complete, then the right maintenance program needs to be specified. This is done through utilization of experience from the industry based on the type of component. Maintenance strategies and templates have been produced for most power plant components. Each station or fleet needs then to apply the criteria, with exceptions as required, to determine the maintenance requirements and frequency for their components. This includes predictive and preventative maintenance. The more critical the component is the more rigorous the maintenance requirements. Once the maintenance program is defined it can be implemented. This requires that the Preventative Maintenance (PM's) are updated to ensure the correct tasks are in place and the frequency is correct. Work Management will group the PM's so they can scheduled efficiently and to minimize equipment down time. The last element is to ensure that the required parts are specified and are stocked or readily available for the maintenance when it is scheduled. This is an ongoing effort since components become obsolete or suppliers go out of business or change hands. (author)

  3. The Effects of a Family Support Program Including Respite Care on Parenting Stress and Family Quality of Life Perceived by Primary Caregivers of Children with Disabilities in Korea

    Science.gov (United States)

    Sung, Minjung; Park, Jiyeon

    2012-01-01

    In this study, a family support program was carried out for primary caregivers of children with disabilities. The program included respite care, recreation programs, counseling, and social support coordination based on individual needs of each family. In order to verify the intervention effects, parenting stress and family quality of life were…

  4. Evaluation of 8-week body weight control program including sea tangle (Laminaria japonica) supplementation in Korean female college students

    OpenAIRE

    You, Jeong Soon; Sung, Min Jung; Chang, Kyung Ja

    2009-01-01

    This study was conducted to evaluate the effects of a body weight control program with supplementation of sea tangle (20 g/day) on 22 female college students. The contents of the program for 8 weeks contained diet therapy, exercise and behavioral modification through nutrition education. Body composition, dietary habit scores, serum lipid profiles, daily nutrient intakes and the quality of life were assessed at the beginning and at the end of the program. Average age of subjects and height we...

  5. Multidisciplinary Difficult Airway Course: An Essential Educational Component of a Hospital-Wide Difficult Airway Response Program.

    Science.gov (United States)

    Leeper, W Robert; Haut, Elliott R; Pandian, Vinciya; Nakka, Sajan; Dodd-O, Jeffrey; Bhatti, Nasir; Hunt, Elizabeth A; Saheed, Mustapha; Dalesio, Nicholas; Schiavi, Adam; Miller, Christina; Kirsch, Thomas D; Berkow, Lauren

    2018-04-05

    A hospital-wide difficult airway response team was developed in 2008 at The Johns Hopkins Hospital with three central pillars: operations, safety monitoring, and education. The objective of this study was to assess the outcomes of the educational pillar of the difficult airway response team program, known as the multidisciplinary difficult airway course (MDAC). The comprehensive, full-day MDAC involves trainees and staff from all provider groups who participate in airway management. The MDAC occurs within the Johns Hopkins Medicine Simulation Center approximately four times per year and uses a combination of didactic lectures, hands-on sessions, and high-fidelity simulation training. Participation in MDAC is the main intervention being investigated in this study. Data were collected prospectively using course evaluation survey with quantitative and qualitative components, and prepost course knowledge assessment multiple choice questions (MCQ). Outcomes include course evaluation scores and themes derived from qualitative assessments, and prepost course knowledge assessment MCQ scores. Tertiary care academic hospital center PARTICIPANTS: Students, residents, fellows, and practicing physicians from the departments of Surgery, Otolaryngology Head and Neck Surgery, Anesthesiology/Critical Care Medicine, and Emergency Medicine; advanced practice providers (nurse practitioners and physician assistants), nurse anesthetists, nurses, and respiratory therapists. Totally, 23 MDACs have been conducted, including 499 participants. Course evaluations were uniformly positive with mean score of 86.9 of 95 points. Qualitative responses suggest major value from high-fidelity simulation, the hands-on skill stations, and teamwork practice. MCQ scores demonstrated significant improvement: median (interquartile range) pre: 69% (60%-81%) vs post: 81% (72%-89%), p < 0.001. Implementation of a MDAC successfully disseminated principles and protocols to all airway providers. Demonstrable

  6. Set up for Success: An Examination of the Ronald E. McNair Postbaccalaureate Achievement Program's Mentoring Component

    Science.gov (United States)

    Wyre, Dwuena Cene

    2011-01-01

    Often, individuals are set up to fail. However, effective mentoring can set individuals up to succeed. This nonexperimental cross-sectional, predictive study examines the Ronald E. McNair Postbaccalaureate Achievement Program's mentoring component. Specific focus is placed on faculty mentor competency and its impact on McNair student intent to…

  7. Building upon Bystander Intervention: A Multi-Component Prevention Programming Approach for University Sorority Members

    Science.gov (United States)

    Steward, Jennifer M.

    2017-01-01

    Sexual violence on college campuses is a pervasive problem with the potential for extensive physical and psychological health consequences. Institutions have begun implementing prevention programs; however, more research is needed to understand whether these programs are effective. Bystander intervention programs have increased in popularity…

  8. A Food Transfer Program without a Formal Education Component Modifies Complementary Feeding Practices in Poor Rural Mexican Communities.

    Science.gov (United States)

    Ramírez-Luzuriaga, María J; Unar-Munguía, Mishel; Rodríguez-Ramírez, Sonia; Rivera, Juan A; González de Cosío, Teresa

    2016-01-01

    Inadequate complementary feeding partially explains micronutrient deficiencies in the first 2 y of life. To prevent malnutrition, the Mexican government implemented the Programa de Apoyo Alimentario (PAL), which transferred either food baskets containing micronutrient-fortified milk and animal food products or cash to beneficiary families along with educational sessions. This study evaluated the impact of PAL on 2 indicators of complementary feeding: minimum dietary diversity and consumption of iron-rich or iron-fortified foods in children aged 6-23 mo. A secondary analysis of the original PAL evaluation design was conducted through a randomized community trial implemented with 3 intervention groups (food basket with education, food basket without education, and cash transfer with education) and a control. The impact of PAL after 14 mo of exposure was estimated in 2 cross-sectional groups of children aged 6-23 mo at baseline and at follow-up in a panel of 145 communities by using difference-in-difference models. Only children who lived in households and communities that were similar between treatment groups at baseline were included in the analysis. These children were identified by using a propensity score. Of the 3 intervention groups, when compared with the control, only the food basket without education group component increased the consumption of iron-rich or iron-fortified foods by 31.2 percentage points (PP) (P diversity by 21.6 PP (P effective than cash transfers. The fact that the 2 food basket groups differed in the observed impact does not allow for more convincing conclusions to be made about the education component of the program. This trial was registered at clinicaltrials.gov as NCT01304888. © 2016 American Society for Nutrition.

  9. Ca analysis: an Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis.

    Science.gov (United States)

    Greensmith, David J

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. Copyright © 2013 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

  10. Ca analysis: An Excel based program for the analysis of intracellular calcium transients including multiple, simultaneous regression analysis☆

    Science.gov (United States)

    Greensmith, David J.

    2014-01-01

    Here I present an Excel based program for the analysis of intracellular Ca transients recorded using fluorescent indicators. The program can perform all the necessary steps which convert recorded raw voltage changes into meaningful physiological information. The program performs two fundamental processes. (1) It can prepare the raw signal by several methods. (2) It can then be used to analyze the prepared data to provide information such as absolute intracellular Ca levels. Also, the rates of change of Ca can be measured using multiple, simultaneous regression analysis. I demonstrate that this program performs equally well as commercially available software, but has numerous advantages, namely creating a simplified, self-contained analysis workflow. PMID:24125908

  11. Changes in the physicochemical characteristics, including flavour components and Maillard reaction products, of non-centrifugal cane brown sugar during storage.

    Science.gov (United States)

    Asikin, Yonathan; Kamiya, Asahiro; Mizu, Masami; Takara, Kensaku; Tamaki, Hajime; Wada, Koji

    2014-04-15

    Changes in the quality attributes of non-centrifugal cane brown sugar represented by physicochemical characteristics as well as flavour components and Maillard reaction products (MRPs) were monitored every 3 months over 1 year of storage. Stored cane brown sugar became darker, and its moisture content and water activity (a(w)) increased during storage. Fructose and glucose levels decreased as non-enzymatic browning via the Maillard reaction occurred in the stored sample, and a similar trend was also discovered in aconitic and acetic acids. Stored cane brown sugar lost its acidic and sulfuric odours (58.70-39.35% and 1.85-0.08%, respectively); subsequently, the nutty and roasted aroma increased from 26.52% to 38.59% due to the volatile MRPs. The browning rate of stored cane brown sugar was positively associated with the development of volatile MRPs (Pearson's coefficient = 0.860), whereas the amount of 3-deoxyglucosone, an intermediate product of the Maillard reaction, had a lower association with the brown colour due to its relatively slow degradation rate. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Why every national deep-geological-isolation program needs a long-term science & technology component

    International Nuclear Information System (INIS)

    Budnitz, R J

    2006-01-01

    The objective of this paper is to set down the rationale for a separate Science & Technology (S&T) Program within every national deep-geological-isolation program. The fundamental rationale for such a Program is to provide a dedicated focus for longer-term science and technology activities that ultimately will benefit the whole repository mission. Such a Program, separately funded and with a dedicated staff (separate from the ''mainline'' activities to develop the repository, the surface facilities, and the transportation system), can devote itself exclusively to the development and management of a long-term science and technology program. Broad experience in governments worldwide has demonstrated that line offices are unlikely to be able to develop and sustain both the appropriate longer-term philosophy and the specialized skills associated with managing longer-term science and technology projects. Accomplishing both of these requires a separate dedicated program office with its own staff

  13. [Verification of doubtful PAP smear results of women included in the screening program in the Podlaskie province].

    Science.gov (United States)

    Błońska, Ewa; Knapp, Piotr Andrzej

    2013-08-01

    Verification of uncertain PAP-smear results in a group of women covered by the cervical screening program in the Podlaski province. The main aim of the study was to identify CIN (Cervical Intraepithelial Neoplasia) lesions present, with varying degrees of severity in women with cytological diagnosis of ASCUS (atypical squamous cells of undetermined significance), LSIL (low grade squamous intraepithelial lesion), and ASC-H (atypical squamous cells - cannot exclude high grade squamous intraepithelial lesion). The study evaluated 101 cervical smears taken from the vaginal part of the cervix in a group of screened women in the Podlaski province. Cytological evaluation was performed according the Bethesda System. We analyzed abnormal smears selected from a total of 7296 cytological examinations performed during 2012 at the University Center for Pathomorphological and Genetic - Molecular Diagnosis, Medical University in Białystok. The cytological results which were of interest to us included 19 cases with ASCUS, 59 with LSIL, and 23 with ASC-H, as well as with morphological features of the presence of Human Papilloma Virus (HPV). Staining was performed using CINtecPLUS test according to the manufacturer's instructions. CINtecPLUS is a immunocytochemical test based on specially designed monoclonal antibodies (E6H4TM) that let us identify protein p16ink4a within the cervical smear Additionally the diagnostic kit was provided with antibodies for diagnosing the presence of Ki-67 protein, a known marker of cell proliferation. The result was considered positive when staining of the nucleus and the cytoplasm appeared in red and brown, respectively. All abnormal results were eventually verified by histological examination of the tissue taken from cervical lesions by diagnostic-therapeutic procedure following colposcopic evaluation of cervical lesion topography In the group of cytological smears with ASCUS, the diagnosis was positive in 5 cases (26.3%), negative in 14 (73

  14. Low Cost High Performance Generator Technology Program. Volume 3. Component development

    International Nuclear Information System (INIS)

    1975-06-01

    The status of the component development effort both in the thermoelectric module area and in the heat source task is reported. In addition, related efforts by outside facilities are identified and a bibliography of heat source development documents is presented

  15. Solving Component Structural Dynamic Failures Due to Extremely High Frequency Structural Response on the Space Shuttle Program

    Science.gov (United States)

    Frady, Greg; Nesman, Thomas; Zoladz, Thomas; Szabo, Roland

    2010-01-01

    For many years, the capabilities to determine the root-cause failure of component failures have been limited to the analytical tools and the state of the art data acquisition systems. With this limited capability, many anomalies have been resolved by adding material to the design to increase robustness without the ability to determine if the design solution was satisfactory until after a series of expensive test programs were complete. The risk of failure and multiple design, test, and redesign cycles were high. During the Space Shuttle Program, many crack investigations in high energy density turbomachines, like the SSME turbopumps and high energy flows in the main propulsion system, have led to the discovery of numerous root-cause failures and anomalies due to the coexistences of acoustic forcing functions, structural natural modes, and a high energy excitation, such as an edge tone or shedding flow, leading the technical community to understand many of the primary contributors to extremely high frequency high cycle fatique fluid-structure interaction anomalies. These contributors have been identified using advanced analysis tools and verified using component and system tests during component ground tests, systems tests, and flight. The structural dynamics and fluid dynamics communities have developed a special sensitivity to the fluid-structure interaction problems and have been able to adjust and solve these problems in a time effective manner to meet budget and schedule deadlines of operational vehicle programs, such as the Space Shuttle Program over the years.

  16. Spirituality as a Component in a Treatment Program for Sexually Addicted Roman Catholic Clergy.

    Science.gov (United States)

    Hudson, Patricia E.

    1997-01-01

    A treatment program that integrates spirituality and therapy for sex abusers who are Roman Catholic priests or brothers is described. Selections from an interview with the program director cover definitions, philosophy, women as therapists, daily activity, candidates, and the spiritual dimension. Measures of success and after-care are discussed.…

  17. SPSS and SAS programs for determining the number of components using parallel analysis and velicer's MAP test.

    Science.gov (United States)

    O'Connor, B P

    2000-08-01

    Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.

  18. Building a Steganography Program Including How to Load, Process, and Save JPEG and PNG Files in Java

    Science.gov (United States)

    Courtney, Mary F.; Stix, Allen

    2006-01-01

    Instructors teaching beginning programming classes are often interested in exercises that involve processing photographs (i.e., files stored as .jpeg). They may wish to offer activities such as color inversion, the color manipulation effects archived with pixel thresholding, or steganography, all of which Stevenson et al. [4] assert are sought by…

  19. 25 CFR 170.137 - What types of activities can a recreation, tourism, and trails program include?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false What types of activities can a recreation, tourism, and... Eligibility Recreation, Tourism and Trails § 170.137 What types of activities can a recreation, tourism, and... may perform under a recreation, tourism, and trails program: (1) Transportation planning for tourism...

  20. Intensive lifestyle intervention including high-intensity interval training program improves insulin resistance and fasting plasma glucose in obese patients

    Directory of Open Access Journals (Sweden)

    Guillaume Marquis-Gravel

    2015-01-01

    Conclusion: Following a 9-month intensive lifestyle intervention combining HIIT and MedD counseling, obese subjects experienced significant improvements of FPG and insulin resistance. This is the first study to expose the effects of a long-term program combining HIIT and MedD on glycemic control parameters among obese subjects.

  1. Program information architecture/document hierarchy. [Information Management Systems, it's components and rationale

    Energy Technology Data Exchange (ETDEWEB)

    Woods, T.W.

    1991-09-01

    The Nuclear Waste Management System (NWMS) Management Systems Improvement Strategy (MSIS) (DOE 1990) requires that the information within the computer program and information management system be ordered into a precedence hierarchy for consistency. Therefore, the US Department of Energy (DOE). Office of Civilian Radioactive Waste Management (OCRWM) requested Westinghouse Hanford Company to develop a plan for NWMS program information which the MSIS calls a document hierarchy. This report provides the results of that effort and describes the management system as a program information architecture.'' 3 refs., 3 figs.

  2. Development of a noise reduction program of a prompt gamma spectrum based on principal component analysis for an explosive detection

    International Nuclear Information System (INIS)

    Lee, Yun Hee; Im, Hee Jung; Song, Byung ChoI; Park, Yong Joon; Kim, Won Ho; Cho, Jung Hwan

    2005-01-01

    This work demonstrates a developed program to reduce noises of a prompt gamma-ray spectrum measured by irradiating neutrons into baggage. The noises refer to random variations mainly caused by electrical fluctuations and also by a measurement time. Especially, since the short measurement time yields such a noisy spectrum in which its special peak can not be observed, it is necessary to extract its characteristic signals from the spectrum to identify an explosive hidden in luggage. Principal component analysis(PCA) that is a multivariate statistical technique is closely related to singular value decomposition(SVD). The SVD-based PCA decreases the noise by reconstructing the spectrum after determining the number of principal components corresponding important signals based on the history data that sufficiently describe its population. In this study, we present a visualized program of the above procedure using the MATLAB 7.04 programming language. When our program is started, it requires an arbitrary measured spectrum to be reduced and history spectra as input files. If user selects the files with menu, our program automatically carries out the PCA procedure and provides its noise-reduced spectrum plot as well as the original spectrum plot into an output window. In addition, user can obtain signal-to-noise ratio of an interesting peak by defining the peak and noise ranges with menu

  3. Evaluation of 8-week body weight control program including sea tangle (Laminaria japonica) supplementation in Korean female college students

    Science.gov (United States)

    You, Jeong Soon; Sung, Min Jung

    2009-01-01

    This study was conducted to evaluate the effects of a body weight control program with supplementation of sea tangle (20 g/day) on 22 female college students. The contents of the program for 8 weeks contained diet therapy, exercise and behavioral modification through nutrition education. Body composition, dietary habit scores, serum lipid profiles, daily nutrient intakes and the quality of life were assessed at the beginning and at the end of the program. Average age of subjects and height were 20.8 years and 161.9 cm, respectively. After 8 weeks, there were significant reductions in body weight, body fat mass, percent body fat, waist-hip ratio and BMI. The dietary habit score such as a balanced diet, regularity of mealtime, overeating, eating while watching TV or using the computer and eating salty food were increased significantly. Serum lipid levels such as total cholesterol level, LDL-cholesterol level and triglyceride level were decreased but not significantly. There were decreases in intake of energy, protein and fat and increases in intakes of dietary fiber, folic acid, calcium and potassium from the beginning to the end of the program. There were significant improvements on subcomponents of quality of life; physical functioning, general-health and vitality. The limitation of this study was the fact that there was no control group, but an overall evaluation suggests the 8-week body weight control program consisting of diet therapy, exercise and behavioral modification with supplementation of sea tangle would be helpful to improve the body composition, dietary habits, daily nutrient intakes and quality of life in Korean female college students. PMID:20098584

  4. Program for calculating multi-component high-intense ion beam transport

    International Nuclear Information System (INIS)

    Kazarinov, N.Yu.; Prejzendorf, V.A.

    1985-01-01

    The CANAL program for calculating transport of high-intense beams containing ions with different charges in a channel consisting of dipole magnets and quadrupole lenses is described. The equations determined by the method of distribution function momenta and describing coordinate variations of the local mass centres and r.m.s. transverse sizes of beams with different charges form the basis of the calculation. The program is adapted for the CDC-6500 and SM-4 computers. The program functioning is organized in the interactive mode permitting to vary the parameters of any channel element and quickly choose the optimum version in the course of calculation. The calculation time for the CDC-6500 computer for the 30-40 m channel at the integration step of 1 cm is about 1 min. The program is used for calculating the channel for the uranium ion beam injection from the collective accelerator into the heavy-ion synchrotron

  5. [Training of residents in obstetrics and gynecology: Assessment of an educational program including formal lectures and practical sessions using simulators].

    Science.gov (United States)

    Jordan, A; El Haloui, O; Breaud, J; Chevalier, D; Antomarchi, J; Bongain, A; Boucoiran, I; Delotte, J

    2015-01-01

    Evaluate an educational program in the training of residents in gynecology-obstetrics (GO) with a theory session and a practical session on simulators and analyze their learning curve. Single-center prospective study, at the university hospital (CHU). Two-day sessions were leaded in April and July 2013. An evaluation on obstetric and gynecological surgery simulator was available to all residents. Theoretical knowledge principles of obstetrics were evaluated early in the session and after formal lectures was taught to them. At the end of the first session, a satisfaction questionnaire was distributed to all participants. Twenty residents agreed to participate to the training sessions. Evaluation of theoretical knowledge: at the end of the session, the residents obtained a significant improvement in their score on 20 testing knowledge. Obstetrical simulator: a statistically significant improvement in scores on assessments simulator vaginal delivery between the first and second session. Subjectively, a larger increase feeling was seen after breech delivery simulation than for the cephalic vaginal delivery. However, the confidence level of the resident after breech delivery simulation has not been improved at the end of the second session. Simulation in gynecological surgery: a trend towards improvement in the time realized on the peg-transfer between the two sessions was noted. In the virtual simulation, no statistically significant differences showed, no improvement for in salpingectomy's time. Subjectively, the residents felt an increase in the precision of their gesture. Satisfaction: All residents have tried the whole program. They considered the pursuit of these sessions on simulators was necessary and even mandatory. The approach chosen by this structured educational program allowed a progression for the residents, both objectively and subjectively. This simulation program type for the resident's training would use this tool in assessing their skills and develop

  6. Benchmarking spliced alignment programs including Spaln2, an extended version of Spaln that incorporates additional species-specific features.

    Science.gov (United States)

    Iwata, Hiroaki; Gotoh, Osamu

    2012-11-01

    Spliced alignment plays a central role in the precise identification of eukaryotic gene structures. Even though many spliced alignment programs have been developed, recent rapid progress in DNA sequencing technologies demands further improvements in software tools. Benchmarking algorithms under various conditions is an indispensable task for the development of better software; however, there is a dire lack of appropriate datasets usable for benchmarking spliced alignment programs. In this study, we have constructed two types of datasets: simulated sequence datasets and actual cross-species datasets. The datasets are designed to correspond to various real situations, i.e. divergent eukaryotic species, different types of reference sequences, and the wide divergence between query and target sequences. In addition, we have developed an extended version of our program Spaln, which incorporates two additional features to the scoring scheme of the original version, and examined this extended version, Spaln2, together with the original Spaln and other representative aligners based on our benchmark datasets. Although the effects of the modifications are not individually striking, Spaln2 is consistently most accurate and reasonably fast in most practical cases, especially for plants and fungi and for increasingly divergent pairs of target and query sequences.

  7. Facilitators, barriers, and components of a culturally tailored afterschool physical activity program in preadolescent African American girls and their mothers.

    Science.gov (United States)

    Alhassan, Sofiya; Greever, Cory; Nwaokelemeh, Ogechi; Mendoza, Albert; Barr-Anderson, Daheia J

    2014-01-01

    Traditional physical activity (PA) programs have not been effective in increasing PA in African American girls. Currently, there is limited information regarding the components of PA programs that drive participation in African American girls. The purpose of our investigation was to describe the facilitators, barriers, and components of a culturally tailored afterschool PA program that will potentially inspire the participation of African American mother-daughter dyads. Six focus groups (n=12 mother-daughter dyads; daughters, 7-10 yrs in age) were conducted between March and May 2012. Focus group semi-structured interviews were transcribed, coded, and systematically analyzed using NVivo. Mothers reported a preference for non-traditional (dancing, household chores) types of PA. While daughters preferred to participate in both dance-based and traditional types (walking, riding bikes) of PA. Participants felt that the use of a culturally tailored dance program would be appealing because it highlights the cultural and historical legacy of the African American culture. Mothers wanted programs that would allow them time to spend with their daughters. Top three dance styles that mothers wanted to participate in were African, hip-hop, and Salsa/samba, while daughters reported that they would enjoy participating in hip-hop, African, and jazz. The most common responses given for resources needed for participating in a culturally tailored afterschool dance program were the location of the program, transportation, and childcare for siblings. Our investigation highlights some cultural factors related to facilitators and barriers of PA that should be addressed in designing PA studies for African American girls and their mothers.

  8. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  9. Components production and assemble of the irradiation capsule of the Surveillance Program of Materials of the nuclear power plant of Laguna Verde

    International Nuclear Information System (INIS)

    Medrano, A.

    2009-01-01

    To predict the effects of the neutrons radiation and the thermal environment about the mechanical properties of the reactor vessel materials of the nuclear power plant of Laguna Verde, a surveillance program is implemented according to the outlines settled by Astm E185-02 -Standard practice for design of surveillance programs for light-water moderated nuclear power reactor vessels-. This program includes the installation of three irradiation capsules of similar materials to those of the reactor vessels, these samples are test tubes for mechanical practices of impact and tension. In the National Institute of Nuclear Research and due to the infrastructure as well as of the actual human resources of the Pilot Plant of Nuclear Fuel Assembles Production it was possible to realize the materials rebuilding extracted in 2005 of Unit 2 of nuclear power plant of Laguna Verde as well as the production, assemble and reassignment of the irradiation capsule made in 2006. At the present time the surveillance materials extracted in 2008 of Unit 1 of the nuclear power plant of Laguna Verde are reconstituting and the components are manufactured for the assembles of the irradiation capsule that will be reinstalled in the reactor vessel in 2010. The purpose of the present work is to describe the necessary components as well as its disposition during the assembles of the irradiation capsule for the surveillance program of the reactors vessel of the nuclear power plant of Laguna Verde. (Author)

  10. 40 CFR 1033.645 - Non-OEM component certification program.

    Science.gov (United States)

    2010-07-01

    ... program. 1033.645 Section 1033.645 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...) Pistons. (iii) Piston rings. (iv) Heads (v) Fuel injectors. (vi) Turbochargers (vii) Aftercoolers and... that fails. You may choose to accept that your part is causing an emission problem rather than...

  11. Systematic Evaluation Strategies for Innovative Programs in Health Professions Education: Need, Function and Components.

    Science.gov (United States)

    Taft, Thomas B., Jr.; Logan, Nelson S.

    As change occurs in various health sciences programs, evaluational strategies should be developed so that adaptive decisions may be made. Evaluation models taking into account inputs, methodology, and outputs (Stake, 1967, and Astin and Panes, 1971) need examination. Alternative measurement instruments for formative and summative evaluations,…

  12. Components installation. Scheduling techniques applied at Framatome for the French nuclear program

    International Nuclear Information System (INIS)

    Cremese, G.

    1982-09-01

    The first scheduling objective is a timely delivery of heavy components manufactured by FRAMATOME factories: reactor vessel, steam generators and pressurizer. The second scheduling function is the preparation and updating of overall and detailed schedules for the coordination and follow-up of: design activities, progress at equipment suppliers, construction and erection activities of sub-contractors, test and start-up tasks by FRAMATOME and customer teams, and maintenance operations by FRAMATOME teams. I shall first describe the schedules for the contract first unit then show how the following units of the contract are scheduled in their turn

  13. Integrating Gender into World Bank Financed Transport Programs : Component 1. Case Study Summary and Final Report

    OpenAIRE

    IC Net

    2004-01-01

    The World Bank in November 2001 commissioned IC Net Limited of Japan to carry out a study titled 'Integrating Gender into World Bank Financed Transport Programs' in accord with the terms of reference (TOR) issued in June 2001. The study was financed by a grant from the Japanese Large Studies Trust Fund. The contract came into effect on 15 December 2001 and covers the period to 15 June 2004...

  14. Mixed waste chemical compatibility: A testing program for plastic packaging components

    International Nuclear Information System (INIS)

    Nigrey, P.J.

    1995-01-01

    The purpose of hazardous and radioactive materials packaging is to enable these materials to be transported without posing a threat to the health or property of the general public. To achieve this aim, regulations in the United States have been written establishing general design requirements for such packagings. While no regulations have been written specifically for mixed waste packaging, regulations for the constituents of mixed wastes, i.e., hazardous and radioactive substances, have been codified by the US Department of Transportation (DOT, 49 CFR 173) and the US Nuclear Regulatory Commission (NRC, 10 CFR 71). The design requirements for both hazardous [49 CFR 173.24 (e)(1)] and radioactive [49 CFR 173.412 (g)] materials packaging specify packaging compatibility, i.e., that the materials of the packaging at sign d any contents be chemically compatible with each other. Furthermore, Type A [49 CFR 173.412 (g)] and Type B (10 CFR 71.43) packaging design requirements stipulate that there be no significant chemical, galvanic, or other reaction between the materials and contents of the package. Based on these requirements, a Chemical Compatibility Testing Program was developed in the Transportation Systems Department at Sandia National Laboratories (SNL). The program attempts to assure any regulatory body that the issue of packaging material compatibility towards hazardous and radioactive materials has been addressed. This program has been described in considerable detail in an internal SNL document, the Chemical Compatibility Test Plan ampersand Procedure Report (Nigrey 1993)

  15. Undergraduate Students' Perceptions of the Mathematics Courses Included in the Primary School Teacher Education Program

    Science.gov (United States)

    Serin, Mehmet Koray; Incikabi, Semahat

    2017-01-01

    Mathematics educators have reported on many issues regarding students' mathematical education, particularly students who received mathematics education at different departments such as engineering, science or primary school, including their difficulties with mathematical concepts, their understanding of and preferences for mathematical concepts.…

  16. 32 CFR Appendix B to Part 80 - Procedures for Special Educational Programs (Including Related Services) for Preschool Children...

    Science.gov (United States)

    2010-07-01

    ... arts, and mathematics, to determine whether a preschool child or child may be in need of special... special educator, school psychologist, speech therapist, or a reading specialist, in conformity with the... a multidisciplinary team and shall include a teacher or other specialist with knowledge in the areas...

  17. Effectiveness of a Multi-Component Intervention for Overweight and Obese Children (Nereu Program: A Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Noemi Serra-Paya

    Full Text Available Treatment of childhood obesity is a complex challenge for primary health care professionals.To evaluate the effectiveness of the Nereu Program in improving anthropometric parameters, physical activity and sedentary behaviours, and dietary intake.Randomized, controlled, multicentre clinical trial comparing Nereu Program and usual counselling group interventions in primary care settings. The 8-month study recruited 113 children aged 6 to 12 years with overweight/obesity. Before recruitment, eligible participants were randomly allocated to an intensive, family-based multi-component behavioural intervention (Nereu Program group or usual advice from their paediatrician on healthy eating and physical activity. Anthropometric parameters, objectively measured sedentary and physical activity behaviours, and dietary intake were evaluated pre- and post-intervention.At the end of the study period, both groups achieved a similar decrease in body mass index (BMIsd compared to baseline. Nereu Program participants (n = 54 showed greater increases in moderate-intense physical activity (+6.27% vs. -0.61%, p<0.001 and daily fruit servings (+0.62 vs. +0.13, p<0.026, and decreased daily soft drinks consumption (-0.26 vs. -0.02, p<0.047, respectively, compared to the counselling group (n = 59.At the end of the 8-month intervention, participants in the Nereu Program group showed improvement in physical activity and dietary behaviours, compared to the counselling group.ClinicalTrials.gov NCT01878994.

  18. ICECON: a computer program used to calculate containment back pressure for LOCA analysis (including ice condenser plants)

    International Nuclear Information System (INIS)

    1976-07-01

    The ICECON computer code provides a method for conservatively calculating the long term back pressure transient in the containment resulting from a hypothetical Loss-of-Coolant Accident (LOCA) for PWR plants including ice condenser containment systems. The ICECON computer code was developed from the CONTEMPT/LT-022 code. A brief discussion of the salient features of a typical ice condenser containment is presented. Details of the ice condenser models are explained. The corrections and improvements made to CONTEMPT/LT-022 are included. The organization of the code, including the calculational procedure, is outlined. The user's manual, to be used in conjunction with the CONTEMPT/LT-022 user's manual, a sample problem, a time-step study (solution convergence) and a comparison of ICECON results with the results of the NSSS vendor are presented. In general, containment pressure calculated with the ICECON code agree with those calculated by the NSSS vendor using the same mass and energy release rates to the containment

  19. Hazardous Materials Pharmacies - A Vital Component of a Robust P2 Program

    International Nuclear Information System (INIS)

    McCarter, S.

    2006-01-01

    Integrating pollution prevention (P2) into the Department of Energy Integrated Safety Management (ISM) - Environmental Management System (EMS) approach, required by DOE Order 450.1, leads to an enhanced ISM program at large and complex installations and facilities. One of the building blocks to integrating P2 into a comprehensive environmental and safety program is the control and tracking of the amounts, types, and flow of hazardous materials used on a facility. Hazardous materials pharmacies (typically called HazMarts) provide a solid approach to resolving this issue through business practice changes that reduce use, avoid excess, and redistribute surplus. If understood from concept to implementation, the HazMart is a powerful tool for reducing pollution at the source, tracking inventory storage, controlling usage and flow, and summarizing data for reporting requirements. Pharmacy options can range from a strict, single control point for all hazardous materials to a virtual system, where the inventory is user controlled and reported over a common system. Designing and implementing HazMarts on large, diverse installations or facilities present a unique set of issues. This is especially true of research and development (R and D) facilities where the chemical use requirements are extensive and often classified. There are often multiple sources of supply; a wide variety of chemical requirements; a mix of containers ranging from small ampoules to large bulk storage tanks; and a wide range of tools used to track hazardous materials, ranging from simple purchase inventories to sophisticated tracking software. Computer systems are often not uniform in capacity, capability, or operating systems, making it difficult to use a server-based unified tracking system software. Each of these issues has a solution or set of solutions tied to fundamental business practices. Each requires an understanding of the problem at hand, which, in turn, requires good communication among all

  20. A testing program to evaluate the effects of simulant mixed wastes on plastic transportation packaging components

    International Nuclear Information System (INIS)

    Nigrey, P.J.; Dickens, T.G.

    1997-01-01

    Based on regulatory requirements for Type A and B radioactive material packaging, a Testing Program was developed to evaluate the effects of mixed wastes on plastic materials which could be used as liners and seals in transportation containers. The plastics evaluated in this program were butadiene-acrylonitrile copolymer (Nitrile rubber), cross-linked polyethylene, epichlorohydrin, ethylene-propylene rubber (EPDM), fluorocarbons, high-density polyethylene (HDPE), butyl rubber, polypropylene, polytetrafluoroethylene, and styrene-butadiene rubber (SBR). These plastics were first screened in four simulant mixed wastes. The liner materials were screened using specific gravity measurements and seal materials by vapor transport rate (VTR) measurements. For the screening of liner materials, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals. The tests also indicated that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture waste, none of the seal materials met the screening criteria. Those materials which passed the screening tests were subjected to further comprehensive testing in each of the simulant wastes. The materials were exposed to four different radiation doses followed by exposure to a simulant mixed waste at three temperatures and four different exposure times (7, 14, 28, 180 days). Materials were tested by measuring specific gravity, dimensional, hardness, stress cracking, VTR, compression set, and tensile properties. The second phase of this Testing Program involving the comprehensive testing of plastic liner has been completed and for seal materials is currently in progress

  1. 20 CFR 664.410 - Must local programs include each of the ten program elements listed in WIA section 129(c)(2) as...

    Science.gov (United States)

    2010-04-01

    ... available to youth participants: (1) Tutoring, study skills training, and instruction leading to secondary school completion, including dropout prevention strategies; (2) Alternative secondary school offerings... 664.470; (5) Occupational skill training; (6) Leadership development opportunities, which include...

  2. Expanding Free School-based Human Papilloma Virus (HPV Vaccination Programs to Include School-aged Males in Nova Scotia, Canada

    Directory of Open Access Journals (Sweden)

    Hannah Krater-Melamed

    2017-06-01

    Full Text Available Bill 70 (HPV Vaccine Act was presented to the Nova Scotia House of Assembly with the aim of expanding the current Nova Scotia school-based HPV vaccination program to include males. In recent years, increased awareness of HPV and HPV-caused cancers has led to the implementation of school-based female HPV vaccination programs across Canada. Changing guidelines, based on recent evidence, suggest that males should also be included in these programs. Program expansion to include males aims to reduce the prevalence of HPV-causing cancers and their ensuing costs, to promote equal access to healthcare services, and to make Nova Scotia a leader in HPV prevention. Support from the Canadian public and high profile political actors along with pressure from other provinces and interest groups, including the Society of Obstetricians and Gynaecologists of Canada, influenced the passing of the HPV Vaccine Act. In order to implement this reform, the provincial financial commitment to the previous HPV program was expanded to cover the cost of male vaccination.

  3. A 2-dimensional RBS simulation program for studying the edges of multilayer integrated circuit components

    Energy Technology Data Exchange (ETDEWEB)

    Guo, X.S.; Lanford, W.A. (Dept. of Physics, State Univ. of New York, Albany, NY (USA)); Rodbell, K.P. (IBM East Fishkill, Hopewell Junction, NY (USA))

    1990-01-01

    A computer program has been written to simulate the RBS spectrum from a sample consisting of many parallel three-layer stripes on a substrate (e.g. Al/Hf/Al stripes on SiO{sub 2}). The simulated RBS spectrum depends on the thickness of the different layers, the width of the stripes, the angle of the stripe side wall, the ion beam angle, the detector angle and the size and position of the ion beam on the stripe. The simulation fits experimental data well and can be used to determine diffusion in horizontal directions. It also provides an accurate way of measuring the angle of the stripe side wall. (orig.).

  4. AXIOLOGICAL COMPONENT OF VOCATIONAL TRAINING (THE EXAMPLE OF BACHELOR PROGRAMS IN THE FIELD OF THE GARMENT INDUSTRY PRODUCTS DESIGN

    Directory of Open Access Journals (Sweden)

    Lyudmila V. Rosnovskaya

    2015-01-01

    Full Text Available The aim of the article is to review and study the significance of an axiological component and its mechanisms implementation for bachelor vocational training in the field of designing garment industry products.Methods. The methods involve theoretical analysis of philosophical, psychological and pedagogical literature, as well as modeling and classification methods.Scientific novelty and results. An independent axiological component based on structural and content analysis of a clothes designer’s professional work is identified; the content of this component is justified and determined. The substantive characteristics of clothes designer professional competencies are determined in terms of the axiological component. The education objectives aimed at forming the axiological component of Bachelors’ of garment design competencies are classified in correlation with the functions of training. Activity-related information and specifications necessary for values related to actual practice are identified, including channels and mechanisms of translation values in the vocational education process. A model of the educational situation is elaborated, which is proposed to be used as an orientation basis for designing specific educational situations, adequate to this or that kind of value experience. The dialogue activity is shown as the most favorable environment and a form of student activities organization in the development of emotionally-valuable experience.Practical significance. The article is supposed to be used while the training process for the garment industry and the fashion industry staff.

  5. Institutional blood glucose monitoring system for hospitalized patients: an integral component of the inpatient glucose control program.

    Science.gov (United States)

    Boaz, Mona; Landau, Zohar; Matas, Zipora; Wainstein, Julio

    2009-09-01

    The ability to measure patient blood glucose levels at bedside in hospitalized patients and to transmit those values to a central database enables and facilitates glucose control and follow-up and is an integral component in the care of the hospitalized diabetic patient. The goal of this study was to evaluate the performance of an institutional glucometer employed in the framework of the Program for the Treatment of the Hospitalized Diabetic Patient (PTHDP) at E. Wolfson Medical Center, Holon, Israel. As part of the program to facilitate glucose control in hospitalized diabetic patients, an institutional glucometer was employed that permits uploading of data from stands located in each inpatient department and downloading of that data to a central hospital-wide database. Blood glucose values from hospitalized diabetic patients were collected from August 2007 to October 2008. The inpatient glucose control program was introduced gradually beginning January 2008. During the follow-up period, more than 150,000 blood glucose measures were taken. Mean glucose was 195.7 +/- 99.12 mg/dl during the follow-up period. Blood glucose values declined from 206 +/- 105 prior to PTHDP (August 2007-December 2007) to 186 +/- 92 after its inception (January 2008-October 2008). The decline was associated significantly with time (r = 0.11, p < 0.0001). The prevalence of blood glucose values lower than 60 mg/dl was 1.48% [95% confidence interval (CI) 0.36%] prior to vs 1.55% (95% CI 0.37%) following implementation of the PTHDP. Concomitantly, a significant increase in the proportion of blood glucose values between 80 and 200 mg/dl was observed, from 55.5% prior to program initiation vs 61.6% after program initiation (p < 0.0001). The present study was designed to observe changes in institution-wide glucose values following implementation of the PTHDP. Information was extracted from the glucometer system itself. Because the aforementioned study was not a clinical trial, we cannot rule out

  6. Using Discrete Event Simulation for Programming Model Exploration at Extreme-Scale: Macroscale Components for the Structural Simulation Toolkit (SST).

    Energy Technology Data Exchange (ETDEWEB)

    Wilke, Jeremiah J [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Kenny, Joseph P. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2015-02-01

    Discrete event simulation provides a powerful mechanism for designing and testing new extreme- scale programming models for high-performance computing. Rather than debug, run, and wait for results on an actual system, design can first iterate through a simulator. This is particularly useful when test beds cannot be used, i.e. to explore hardware or scales that do not yet exist or are inaccessible. Here we detail the macroscale components of the structural simulation toolkit (SST). Instead of depending on trace replay or state machines, the simulator is architected to execute real code on real software stacks. Our particular user-space threading framework allows massive scales to be simulated even on small clusters. The link between the discrete event core and the threading framework allows interesting performance metrics like call graphs to be collected from a simulated run. Performance analysis via simulation can thus become an important phase in extreme-scale programming model and runtime system design via the SST macroscale components.

  7. Alternative Feedstocks Program Technical and Economic Assessment: Thermal/Chemical and Bioprocessing Components

    Energy Technology Data Exchange (ETDEWEB)

    Bozell, J. J.; Landucci, R.

    1993-07-01

    This resource document on biomass to chemicals opportunities describes the development of a technical and market rationale for incorporating renewable feedstocks into the chemical industry in both a qualitative and quantitative sense. The term "renewable feedstock?s" can be defined to include a huge number of materials such as agricultural crops rich in starch, lignocellulosic materials (biomass), or biomass material recovered from a variety of processing wastes.

  8. Assessing soft skills components in science and technology programs within Malaysian Technical Universities

    OpenAIRE

    Kahirol Mohd Salleh; Nor Lisa Sulaiman; Mimi Mohaffyza Mohamad; Lai Chee Sern

    2017-01-01

    The workforce is a social environment where particular skills are essential in order for workers to perform well, have a competitive edge and succeed in their careers. A soft skill is one of the skills needed in every type of workplace setting. Soft skills include communication skills, collaboration skills, entrepreneurship, and others. Workplace need workers who are competent not only with technical skills but who also have soft skills. There is lack of literature discussion on the ...

  9. Heat source component development program. Report for period March 1978--June 1978

    International Nuclear Information System (INIS)

    1978-07-01

    The General Purpose Heat Source (GPHS) is a radioisotope heat source being developed by LASL. The first intended application for the GPHS is the Solar Polar mission scheduled for 1983. Battelle's support of LASL during the current reporting period is reported. The specific efforts include: (1) analysis of trial designs with emphasis on comparison of performances of trial designs 1 and 2 and their modifications; and (2) helium vent development with emphasis on fabrication and qualification testing of platinum and iridium nonselective vents

  10. Temperature Programmed Desorption of Quench-condensed Krypton and Acetone in Air; Selective Concentration of Ultra-trace Gas Components.

    Science.gov (United States)

    Suzuki, Taku T; Sakaguchi, Isao

    2016-01-01

    Selective concentration of ultra-trace components in air-like gases has an important application in analyzing volatile organic compounds in the gas. In the present study, we examined quench-condensation of the sample gas on a ZnO substrate below 50 K followed by temperature programmed desorption (TPD) (low temperature TPD) as a selective gas concentration technique. We studied two specific gases in the normal air; krypton as an inert gas and acetone as a reactive gas. We evaluated the relationship between the operating condition of low temperature TPD and the lowest detection limit. In the case of krypton, we observed the selective concentration by exposing at 6 K followed by thermal desorption at about 60 K. On the other hand, no selectivity appeared for acetone although trace acetone was successfully concentrated. This is likely due to the solvent effect by a major component in the air, which is suggested to be water. We suggest that pre-condensation to remove the water component may improve the selectivity in the trace acetone analysis by low temperature TPD.

  11. Two-Component Structure of the Radio Source 0014+813 from VLBI Observations within the CONT14 Program

    Science.gov (United States)

    Titov, O. A.; Lopez, Yu. R.

    2018-03-01

    We consider a method of reconstructing the structure delay of extended radio sources without constructing their radio images. The residuals derived after the adjustment of geodetic VLBI observations are used for this purpose. We show that the simplest model of a radio source consisting of two point components can be represented by four parameters (the angular separation of the components, the mutual orientation relative to the poleward direction, the flux-density ratio, and the spectral index difference) that are determined for each baseline of a multi-baseline VLBI network. The efficiency of this approach is demonstrated by estimating the coordinates of the radio source 0014+813 observed during the two-week CONT14 program organized by the International VLBI Service (IVS) in May 2014. Large systematic deviations have been detected in the residuals of the observations for the radio source 0014+813. The averaged characteristics of the radio structure of 0014+813 at a frequency of 8.4 GHz can be calculated from these deviations. Our modeling using four parameters has confirmed that the source consists of two components at an angular separation of 0.5 mas in the north-south direction. Using the structure delay when adjusting the CONT14 observations leads to a correction of the average declination estimate for the radio source 0014+813 by 0.070 mas.

  12. Assessing soft skills components in science and technology programs within Malaysian Technical Universities

    Directory of Open Access Journals (Sweden)

    Kahirol Mohd Salleh

    2017-06-01

    Full Text Available The workforce is a social environment where particular skills are essential in order for workers to perform well, have a competitive edge and succeed in their careers. A soft skill is one of the skills needed in every type of workplace setting. Soft skills include communication skills, collaboration skills, entrepreneurship, and others. Workplace need workers who are competent not only with technical skills but who also have soft skills. There is lack of literature discussion on the perceptions of needed soft skills in the workplace. Therefore, this study aimed to close the gap in the literature concerning the perceptions of instructors and students in the area of soft skills especially in communication skills, collaboration skills, and entrepreneurship at the workplace. This study aims to decrease the divide in soft skills differences among instructors and students in higher learning institutions so that students have the opportunity to excel in their learning process. This study employs quantitative method specifically using survey as an instrument. The findings shows soft skills including communication, collaboration, and entrepreneurship skills are one of the aspects stressed by the students and instructors at higher learning institutions to ensure that graduates will be employable and competent in order to contribute to the nation development.

  13. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  14. [PSYCHOEDUCATIONAL PROGRAM AS A WAY OF CORRECTING MOTIVATIONAL COMPONENTS IN PATIENTS WITH PARANOID SCHIZOPHRENIA WITH ABDOMINAL OBESITY].

    Science.gov (United States)

    Sinayko, V; Korovina, L

    2016-01-01

    The aim of the study was to investigate the influence of motivational and targeted psychoeducational programs designed for patients with paranoid schizophrenia with abdominal obesity. We observed 34 women aged 18-42 with continuous-flow type paranoid schizophrenia. All patients had a concomitant abdominal obesity, which developed secondarily after long-term administration of second generation antipsychotic medications (at least 1 year). Based on clinical-psychopathological and psychometric methods of assessment and on the analysis of Treatment Satisfaction Questionnaire we have developed modules for psychoeducational programs. Based on the results of the treatment we conclude that the application of psychoeducational programs is an effective component of complex treatment of patients with paranoid schizophrenia. Abdominal obesity should be regarded as an important and the main side effect of long-term therapy with atypical antipsychotic medications. It has a marked negative effect on subjective assessment of patients and decreases the level of their mental and social adaptation. This factor should be the basis for the formation of re-socialization and compliance-oriented actions.

  15. A home monitoring program including real-time wireless home spirometry in idiopathic pulmonary fibrosis: a pilot study on experiences and barriers.

    Science.gov (United States)

    Moor, C C; Wapenaar, M; Miedema, J R; Geelhoed, J J M; Chandoesing, P P; Wijsenbeek, M S

    2018-05-29

    In idiopathic pulmonary fibrosis (IPF), home monitoring experiences are limited, not yet real-time available nor implemented in daily care. We evaluated feasibility and potential barriers of a new home monitoring program with real-time wireless home spirometry in IPF. Ten patients with IPF were asked to test this home monitoring program, including daily home spirometry, for four weeks. Measurements of home and hospital spirometry showed good agreement. All patients considered real-time wireless spirometry useful and highly feasible. Both patients and researchers suggested relatively easy solutions for the identified potential barriers regarding real-time home monitoring in IPF.

  16. Prevention of diabetes in overweight/obese children through a family based intervention program including supervised exercise (PREDIKID project): study protocol for a randomized controlled trial.

    Science.gov (United States)

    Arenaza, Lide; Medrano, María; Amasene, María; Rodríguez-Vigil, Beatriz; Díez, Ignacio; Graña, Manuel; Tobalina, Ignacio; Maiz, Edurne; Arteche, Edurne; Larrarte, Eider; Huybrechts, Inge; Davis, Catherine L; Ruiz, Jonatan R; Ortega, Francisco B; Margareto, Javier; Labayen, Idoia

    2017-08-10

    The global pandemic of obesity has led to an increased risk for prediabetes and type-2 diabetes (T2D). The aims of the current project are: (1) to evaluate the effect of a 22-week family based intervention program, including supervised exercise, on insulin resistance syndrome (IRS) risk in children with a high risk of developing T2D and (2) to identify the profile of microRNA in circulating exosomes and in peripheral blood mononuclear cells in children with a high risk of developing T2D and its response to a multidisciplinary intervention program including exercise. A total of 84 children, aged 8-12 years, with a high risk of T2D will be included and randomly assigned to control (N = 42) or intervention (N = 42) groups. The control group will receive a family based lifestyle education and psycho-educational program (2 days/month), while the intervention group will attend the same lifestyle education and psycho-educational program plus the exercise program (3 days/week, 90 min per session including warm-up, moderate to vigorous aerobic activities, and strength exercises). The following measurements will be evaluated at baseline prior to randomization and after the intervention: fasting insulin, glucose and hemoglobin A1c; body composition (dual-energy X-ray absorptiometry); ectopic fat (magnetic resonance imaging); microRNA expression in circulating exosomes and in peripheral blood mononuclear cells (MiSeq; Illumina); cardiorespiratory fitness (cardiopulmonary exercise testing); dietary habits and physical activity (accelerometry). Prevention and identification of children with a high risk of developing T2D could help to improve their cardiovascular health and to reduce the comorbidities associated with obesity. ClinicalTrials.gov, ID: NCT03027726 . Registered on 16 January 2017.

  17. Prevention of HPV-related cancers in Norway: cost-effectiveness of expanding the HPV vaccination program to include pre-adolescent boys.

    Science.gov (United States)

    Burger, Emily A; Sy, Stephen; Nygård, Mari; Kristiansen, Ivar S; Kim, Jane J

    2014-01-01

    Increasingly, countries have introduced female vaccination against human papillomavirus (HPV), causally linked to several cancers and genital warts, but few have recommended vaccination of boys. Declining vaccine prices and strong evidence of vaccine impact on reducing HPV-related conditions in both women and men prompt countries to reevaluate whether HPV vaccination of boys is warranted. A previously-published dynamic model of HPV transmission was empirically calibrated to Norway. Reductions in the incidence of HPV, including both direct and indirect benefits, were applied to a natural history model of cervical cancer, and to incidence-based models for other non-cervical HPV-related diseases. We calculated the health outcomes and costs of the different HPV-related conditions under a gender-neutral vaccination program compared to a female-only program. Vaccine price had a decisive impact on results. For example, assuming 71% coverage, high vaccine efficacy and a reasonable vaccine tender price of $75 per dose, we found vaccinating both girls and boys fell below a commonly cited cost-effectiveness threshold in Norway ($83,000/quality-adjusted life year (QALY) gained) when including vaccine benefit for all HPV-related diseases. However, at the current market price, including boys would not be considered 'good value for money.' For settings with a lower cost-effectiveness threshold ($30,000/QALY), it would not be considered cost-effective to expand the current program to include boys, unless the vaccine price was less than $36/dose. Increasing vaccination coverage to 90% among girls was more effective and less costly than the benefits achieved by vaccinating both genders with 71% coverage. At the anticipated tender price, expanding the HPV vaccination program to boys may be cost-effective and may warrant a change in the current female-only vaccination policy in Norway. However, increasing coverage in girls is uniformly more effective and cost-effective than expanding

  18. Components of laboratory accreditation.

    Science.gov (United States)

    Royal, P D

    1995-12-01

    Accreditation or certification is a recognition given to an operation or product that has been evaluated against a standard; be it regulatory or voluntary. The purpose of accreditation is to provide the consumer with a level of confidence in the quality of operation (process) and the product of an organization. Environmental Protection Agency/OCM has proposed the development of an accreditation program under National Environmental Laboratory Accreditation Program for Good Laboratory Practice (GLP) laboratories as a supplement to the current program. This proposal was the result of the Inspector General Office reports that identified weaknesses in the current operation. Several accreditation programs can be evaluated and common components identified when proposing a structure for accrediting a GLP system. An understanding of these components is useful in building that structure. Internationally accepted accreditation programs provide a template for building a U.S. GLP accreditation program. This presentation will discuss the traditional structure of accreditation as presented in the Organization of Economic Cooperative Development/GLP program, ISO-9000 Accreditation and ISO/IEC Guide 25 Standard, and the Canadian Association for Environmental Analytical Laboratories, which has a biological component. Most accreditation programs are managed by a recognized third party, either privately or with government oversight. Common components often include a formal review of required credentials to evaluate organizational structure, a site visit to evaluate the facility, and a performance evaluation to assess technical competence. Laboratory performance is measured against written standards and scored. A formal report is then sent to the laboratory indicating accreditation status. Usually, there is a scheduled reevaluation built into the program. Fee structures vary considerably and will need to be examined closely when building a GLP program.

  19. A water-based training program that include perturbation exercises to improve stepping responses in older adults: study protocol for a randomized controlled cross-over trial

    Directory of Open Access Journals (Sweden)

    Tsedek Irit

    2008-08-01

    Full Text Available Abstract Background Gait and balance impairments may increase the risk of falls, the leading cause of accidental death in the elderly population. Fall-related injuries constitute a serious public health problem associated with high costs for society as well as human suffering. A rapid step is the most important protective postural strategy, acting to recover equilibrium and prevent a fall from initiating. It can arise from large perturbations, but also frequently as a consequence of volitional movements. We propose to use a novel water-based training program which includes specific perturbation exercises that will target the stepping responses that could potentially have a profound effect in reducing risk of falling. We describe the water-based balance training program and a study protocol to evaluate its efficacy (Trial registration number #NCT00708136. Methods/Design The proposed water-based training program involves use of unpredictable, multi-directional perturbations in a group setting to evoke compensatory and volitional stepping responses. Perturbations are made by pushing slightly the subjects and by water turbulence, in 24 training sessions conducted over 12 weeks. Concurrent cognitive tasks during movement tasks are included. Principles of physical training and exercise including awareness, continuity, motivation, overload, periodicity, progression and specificity were used in the development of this novel program. Specific goals are to increase the speed of stepping responses and improve the postural control mechanism and physical functioning. A prospective, randomized, cross-over trial with concealed allocation, assessor blinding and intention-to-treat analysis will be performed to evaluate the efficacy of the water-based training program. A total of 36 community-dwelling adults (age 65–88 with no recent history of instability or falling will be assigned to either the perturbation-based training or a control group (no training

  20. Use of a Web-based Delphi for identifying critical components of a professional science master's program in biotechnology

    Science.gov (United States)

    Kantz, Jeannine Wells

    The primary purpose of this research was to develop a model for a professional science master's program combining biotechnology and business. The objectives were to identify stakeholder preferences for various dimensions of a professional science master's program combining biotechnology and business and to identify differences in priorities between subgroups. A secondary purpose was to examine user preferences between Web-based and traditional methods of conducting a Delphi study and the panelist's impressions of its usefulness for program development. Prior to the first round, demographic data were collected on panelists regarding their gender, age, years experience in their current field, position title and education levels. Round 1 started with eight open-ended questions designed to investigate (a) learning objectives, (b) internships, (c) thesis vs. non-thesis degrees, (d) program focus (e) possible entry level positions, (f) roles for the industry advisory board, (g) recommended hours of hands-on experience and (h) other issues of importance. The final round ended with three questions to assess the panelists' perception of the usefulness of the Delphi for program development in higher education. Twenty-four panelists started Round 1 and participation in subsequent rounds varied from 17 in Round 2 to 11 in Round 4. Education level varied and included all levels of education in science and business. Issues emerged early in the study regarding development of different program tracks and the program goals, which were clarified in subsequent rounds. Significant differences occurred between industry and academic subgroups for two tracks, six skills designated for tracks, method of evaluating the internship, and entry-level positions appropriate for new graduates. When analyzed by level of confidence (high confidence vs. low confidence), significant differences occurred for (a) the number of semesters of hands-on experience students should have upon graduation, (b

  1. NAIAD - a computer program for calculation of the steady state and transient behaviour (including LOCA) of compressible two-phase coolant in networks

    International Nuclear Information System (INIS)

    Trimble, G.D.; Turner, W.J.

    1976-04-01

    The three one-dimensional conservation equations of mass, momentum and energy are solved by a stable finite difference scheme which allows the time step to be varied in response to accuracy requirements. Consideration of numerical stability is not necessary. Slip between the phases is allowed and descriptions of complex hydraulic components can be added into specially provided user routines. Intrinsic choking using any of the nine slip models is possible. A pipe or fuel model and detailed surface heat transfer are included. (author)

  2. Long-term efficacy of an ergonomics program that includes patient-handling devices on reducing musculoskeletal injuries to nursing personnel.

    Science.gov (United States)

    Garg, Arun; Kapellusch, Jay M

    2012-08-01

    The aim of this study was to evaluate long-term efficacy of an ergonomics program that included patient-handling devices in six long-term care facilities (LTC) and one chronic care hospital (CCH). Patient handling is recognized as a major source of musculoskeletal disorders (MSDs) among nursing personnel, and several studies have demonstrated effectiveness of patient-handling devices in reducing those MSDs. However, most studies have been conducted in a single facility, for a short period, and/or without a comprehensive ergonomics program. Patient-handling devices along with a comprehensive ergonomics program was implemented in six LTC facilities and one CCH. Pre- and postintervention injury data were collected for 38.9 months (range = 29 to 54 months) and 51.2 months (range = 36 to 60 months), respectively. Postintervention patient-handling injuries decreased by 59.8% (rate ratio [RR] = 0.36, 95% confidence interval [CI] [0.28, 0.49], p nursing staff were fairly low. A vast majority of patients found the devices comfortable and safe. Longer transfer times with the use of devices was not an issue. Implementation of patient-handling devices along with a comprehensive program can be effective in reducing MSDs among nursing personnel. Strategies to expand usage of patient-handling devices in most health care settings should be explored.

  3. Some conclusions with regard to the safety assessment of cracked components drawn from the research program 'integrity of components (FKS II)' at the present state

    International Nuclear Information System (INIS)

    Kussmaul, K.; Foehl, J.; Roos, E.

    1986-01-01

    A special determination method allowed to confirm the transferability of fracture mechanics parameters for crack initiation. A correlation was found between notch impact energy and crack initiation value for the higher shelf of toughness. Carrying and deformation behaviour of components can be determined when stress condition and multi-axis degree are known. The onset of stable and cyclical crack expansion can be verfied by sound emission techniques under corrosive conditions, too. The operational influence of corrosion and radiation can be quantified for specific conditions and states. (DG) [de

  4. Prevention of HPV-related cancers in Norway: cost-effectiveness of expanding the HPV vaccination program to include pre-adolescent boys.

    Directory of Open Access Journals (Sweden)

    Emily A Burger

    Full Text Available BACKGROUND: Increasingly, countries have introduced female vaccination against human papillomavirus (HPV, causally linked to several cancers and genital warts, but few have recommended vaccination of boys. Declining vaccine prices and strong evidence of vaccine impact on reducing HPV-related conditions in both women and men prompt countries to reevaluate whether HPV vaccination of boys is warranted. METHODS: A previously-published dynamic model of HPV transmission was empirically calibrated to Norway. Reductions in the incidence of HPV, including both direct and indirect benefits, were applied to a natural history model of cervical cancer, and to incidence-based models for other non-cervical HPV-related diseases. We calculated the health outcomes and costs of the different HPV-related conditions under a gender-neutral vaccination program compared to a female-only program. RESULTS: Vaccine price had a decisive impact on results. For example, assuming 71% coverage, high vaccine efficacy and a reasonable vaccine tender price of $75 per dose, we found vaccinating both girls and boys fell below a commonly cited cost-effectiveness threshold in Norway ($83,000/quality-adjusted life year (QALY gained when including vaccine benefit for all HPV-related diseases. However, at the current market price, including boys would not be considered 'good value for money.' For settings with a lower cost-effectiveness threshold ($30,000/QALY, it would not be considered cost-effective to expand the current program to include boys, unless the vaccine price was less than $36/dose. Increasing vaccination coverage to 90% among girls was more effective and less costly than the benefits achieved by vaccinating both genders with 71% coverage. CONCLUSIONS: At the anticipated tender price, expanding the HPV vaccination program to boys may be cost-effective and may warrant a change in the current female-only vaccination policy in Norway. However, increasing coverage in girls is

  5. Prevention of HPV-Related Cancers in Norway: Cost-Effectiveness of Expanding the HPV Vaccination Program to Include Pre-Adolescent Boys

    Science.gov (United States)

    Burger, Emily A.; Sy, Stephen; Nygård, Mari; Kristiansen, Ivar S.; Kim, Jane J.

    2014-01-01

    Background Increasingly, countries have introduced female vaccination against human papillomavirus (HPV), causally linked to several cancers and genital warts, but few have recommended vaccination of boys. Declining vaccine prices and strong evidence of vaccine impact on reducing HPV-related conditions in both women and men prompt countries to reevaluate whether HPV vaccination of boys is warranted. Methods A previously-published dynamic model of HPV transmission was empirically calibrated to Norway. Reductions in the incidence of HPV, including both direct and indirect benefits, were applied to a natural history model of cervical cancer, and to incidence-based models for other non-cervical HPV-related diseases. We calculated the health outcomes and costs of the different HPV-related conditions under a gender-neutral vaccination program compared to a female-only program. Results Vaccine price had a decisive impact on results. For example, assuming 71% coverage, high vaccine efficacy and a reasonable vaccine tender price of $75 per dose, we found vaccinating both girls and boys fell below a commonly cited cost-effectiveness threshold in Norway ($83,000/quality-adjusted life year (QALY) gained) when including vaccine benefit for all HPV-related diseases. However, at the current market price, including boys would not be considered ‘good value for money.’ For settings with a lower cost-effectiveness threshold ($30,000/QALY), it would not be considered cost-effective to expand the current program to include boys, unless the vaccine price was less than $36/dose. Increasing vaccination coverage to 90% among girls was more effective and less costly than the benefits achieved by vaccinating both genders with 71% coverage. Conclusions At the anticipated tender price, expanding the HPV vaccination program to boys may be cost-effective and may warrant a change in the current female-only vaccination policy in Norway. However, increasing coverage in girls is uniformly more

  6. ITER Port Plug Engineering Trainee Program: Design, manufacturing and integration of structural components (analysis of the attachment)

    International Nuclear Information System (INIS)

    Zeile, Christian; Neuberger, Heiko; Dolensky, Bernhard

    2011-01-01

    The structural connection of helium cooled plasma facing components in ITER to the water cooled structural port plug shield requires an attachment system, which is able to cope with two main contradicting requirements: The attachment system has to be rigid in order to withstand mechanical loads, e.g. due to the deadweight or static and transient electro-magnetic loads. On the other hand, the attachment system has to be flexible in order to compensate the different thermal strains in between the plasma facing test devices (300-550 deg. C) and the port plug structure (∼120 deg. C). The paper presents the latest developments of an attachment system consisting of flexible attachment blocks with lamellae. The optimization steps as well as the connection to the shield are described. The results of the thermo-mechanical analyses under a defined worst-case scenario confirm the feasibility of the lamella design. This work has been performed in the frame of the EFDA goal orientated trainee program on port plug engineering.

  7. Plasma-Materials Interactions (PMI) and High-Heat-Flux (HHF) component research and development in the US Fusion Program

    International Nuclear Information System (INIS)

    Conn, R.W.

    1986-10-01

    Plasma particle and high heat fluxes to in-vessel components such as divertors, limiters, RF launchers, halo plasma scrapers, direct converters, and wall armor, and to the vacuum chamber itself, represent central technical issues for fusion experiments and reactors. This is well recognized and accepted. It is also well recognized that the conditions at the plasma boundary can directly influence core plasma confinement. This has been seen most dramatically, on the positive side, in the discovery of the H-mode using divertors in tokamaks. It is also reflected in the attention devoted worldwide to the problems of impurity control. Nowadays, impurities are controlled by wall conditioning, special discharge cleaning techniques, special coatings such as carbonization, the use of low-Z materials for limiters and armor, a careful tailoring of heat loads, and in some machines, through the use of divertors. All programs, all experiments, and all designers are now keenly aware that PMI and HHF issues are key to the successful performance of their machines. In this brief report we present general issues in Section 2, critical issues in Section 3, existing US PMI/HHF experiments and facilities in Section 4, US International Cooperative PMI/HHF activities in Section 5, and conclude with a discussion on major tasks in PMI/HHF in Section 6

  8. Are All Program Elements Created Equal? Relations Between Specific Social and Emotional Learning Components and Teacher-Student Classroom Interaction Quality.

    Science.gov (United States)

    Abry, Tashia; Rimm-Kaufman, Sara E; Curby, Timothy W

    2017-02-01

    School-based social and emotional learning (SEL) programs are presented to educators with little understanding of the program components that have the greatest leverage for improving targeted outcomes. Conducted in the context of a randomized controlled trial, the present study used variation in treatment teachers' (N = 143) implementation of four core components of the Responsive Classroom approach to examine relations between each component and the quality of teachers' emotional, organizational, and instructional interactions in third, fourth, and fifth grade classrooms (controlling for pre-intervention interaction quality and other covariates). We also examined the extent to which these relations varied as a function of teachers' baseline levels of interaction quality. Indices of teachers' implementation of Morning Meeting, Rule Creation, Interactive Modeling, and Academic Choice were derived from a combination of teacher-reported surveys and classroom observations. Ratings of teacher-student classroom interactions were aggregated across five observations conducted throughout the school year. Structural path models indicated that teachers' use of Morning Meeting and Academic Choice related to higher levels of emotionally supportive interactions; Academic Choice also related to higher levels of instructional interactions. In addition, teachers' baseline interaction quality moderated several associations such that the strongest relations between RC component use and interaction quality emerged for teachers with the lowest baseline interaction quality. Results highlight the value of examining individual program components toward the identification of program active ingredients that can inform intervention optimization and teacher professional development.

  9. Limites e possibilidades dos programas de aceleração de aprendizagem The limits and possibilities of including students from remedial learning programs in regular schooling

    Directory of Open Access Journals (Sweden)

    Clarilza Prado de Sousa

    1999-11-01

    Full Text Available Pretendi neste trabalho analisar os limites e possibilidades da escola integrar alunos com atraso de escolaridade em processos de educação regular, que receberam apoio de programas de aceleração da aprendizagem. Baseada nas avaliações realizadas desses programas por professores do Programa de Estudos Pós-Graduados em Psicologia da Educação da PUCSP e por pesquisadores do Núcleo de Avaliação Educacional da Fundação Carlos Chagas, discuto os resultados efetivamente alcançados considerando duas categorias de análise. Na primeira categoria, analiso os efeitos da estratégia pedagógica promovida pelos programas, nas aprendizagens e progressos dos alunos participantes. Na segunda categoria, procuro analisar as possibilidades de integração/inclusão desses alunos no processo de educação regular. Finalmente, à guisa de conclusão, procuro fazer algumas considerações teórico-metodológicas. Distinguindo integração de inclusão, discuto os limites e possibilidades que as ações dos programas têm de realmente promoverem o desenvolvimento de uma escola sem exclusão.This article analyzes the limits and possibilities for schools to include students with schooling deficits who receive support from the accelerated learning programs, in their regular education processes. Based on evaluations of these programs done by professors from the Post Graduate Program in Educational Psychology of the Pontifical Catholic University of São Paulo and by researchers from the Nucleus for Educational Evaluation of the Carlos Chagas Foundation, the results will be discussed in two analytical categories. In the first category, I analyze the effects of the teaching strategies promoted by the programs on the learning and progress of the participating students. In the second category, I seek to analyze the possibilities for integration/inclusion of these students in the regular educational process. Finally by way of conclusion, I try to make some

  10. Methodology of aging management in structures, systems and components of a nuclear power plant and its application to a pilot program in Laguna Verde

    International Nuclear Information System (INIS)

    Jarvio C, G.; Fernandez S, G.

    2009-10-01

    From its origin the nuclear power plants confront the effects of time and of environment, giving as result the aging of its structures, systems and components. In this document the general process is described for the establishment of Aging Management Program developed by IAEA. Following the program methodology is guaranteed that a nuclear power plant manages the aging effects appropriately and to make decisions for its solution, assuring the characteristic functions of structures, systems and components of same nuclear power plant. On the other hand, the implantation of an aging management program constitutes the base for development of a licence renovation program, like it can be the specific case of the Central Laguna Verde Units 1 and 2. (Author)

  11. Benefits of a 12-week lifestyle modification program including diet and combined aerobic and resistance exercise on albuminuria in diabetic and non-diabetic Japanese populations.

    Science.gov (United States)

    Yamamoto-Kabasawa, Keiko; Hosojima, Michihiro; Yata, Yusuke; Saito, Mariko; Tanaka, Noriko; Tanaka, Junta; Tanabe, Naohito; Narita, Ichiei; Arakawa, Masaaki; Saito, Akihiko

    2015-12-01

    Albuminuria is a biomarker for chronic kidney disease and an independent predictor of cardiovascular and all-cause mortality. A recent meta-analysis concluded that these risks increase with urinary albumin concentration, even when below the microalbuminuria threshold. Thus, minimizing urinary albumin may be a valuable therapeutic goal regardless of disease status. We investigated the benefits and safety of a 12-week lifestyle modification program including diet and combined aerobic and resistance exercise for reducing albuminuria in 295 normoalbuminuric or microalbuminuric Japanese adults, including 30 with type 2 diabetes mellitus (T2DM), 104 with metabolic syndrome (MS), and 145 with hypertension (HT). In the study population, the urinary albumin:creatinine ratio (UACR) was reduced significantly (ΔUACR -3.8 ± 16.8 mg/g, P < 0.001) with no change in estimated glomerular filtration rate (eGFR) (ΔeGFR -0.4 ± 7.4 mL/min/1.73 m(2), P = 0.343). The reduction in UACR was associated with decreased fasting plasma glucose (P < 0.05). The UACR was also reduced in the T2DM, MS, and HT groups with no change in eGFR. Reduced UACR was associated with decreased fasting plasma glucose in the MS group and decreased systolic blood pressure in the HT group. The UACR was also reduced in 46 subjects using renin-angiotensin system inhibitors with no change in eGFR. Our 12-week lifestyle modification program reduced UACR, maintained eGFR, and improved multiple fitness findings in Japanese subjects including T2DM, MS, and HT patients.

  12. Developmental programming: effect of prenatal steroid excess on intraovarian components of insulin signaling pathway and related proteins in sheep.

    Science.gov (United States)

    Ortega, Hugo H; Rey, Florencia; Velazquez, Melisa M L; Padmanabhan, Vasantha

    2010-06-01

    Prenatal testosterone (T) excess increases ovarian follicular recruitment, follicular persistence, insulin resistance, and compensatory hyperinsulinemia. Considering the importance of insulin in ovarian physiology, in this study, using prenatal T- and dihydrotestosterone (DHT, a nonaromatizable androgen)-treated female sheep, we tested the hypothesis that prenatal androgen excess alters the intraovarian insulin signaling cascade and metabolic mediators that have an impact on insulin signaling. Changes in ovarian insulin receptor (INSRB), insulin receptor substrate 1 (IRS1), mammalian target of rapamycin (MTOR), phosphatidylinositol 3-kinase (PIK3), peroxisome proliferator-activated receptor-gamma (PPARG), and adiponectin proteins were determined at fetal (Days 90 and 140), postpubertal (10 mo), and adult (21 mo) ages by immunohistochemistry. Results indicated that these proteins were expressed in granulosa, theca, and stromal compartments, with INSRB, IRS1, PPARG, and adiponectin increasing in parallel with advanced follicular differentiation. Importantly, prenatal T excess induced age-specific changes in PPARG and adiponectin expression, with increased PPARG expression evident during fetal life and decreased antral follicular adiponectin expression during adult life. Comparison of developmental changes in prenatal T and DHT-treated females found that the effects on PPARG were programmed by androgenic actions of T, whereas the effects on adiponectin were likely by its estrogenic action. These results suggest a role for PPARG in the programming of ovarian disruptions by prenatal T excess, including a decrease in antral follicular adiponectin expression and a contributory role for adiponectin in follicular persistence and ovulatory failure.

  13. Expansion of geographic information components in the educational programs of cartographers at Taras Shevchenko National University of Kyiv

    Directory of Open Access Journals (Sweden)

    Людмила Даценко

    2017-09-01

    Full Text Available The article considers the necessity to make changes in the university curriculum in accordance with the requirements of today. Modern cartography is integrated with GIS and remote sensing and in this context we see the prospect of training experts at universities. GIS education has some specific features that distinguish it from other types of training such as the interdisciplinary nature, a wide range of highly informative software applications, a combination of geographical and engineering knowledge. GIS specialists must have system knowledge and skills in the design, operation and development in this field. Only intensive use of mapping, GIS, geodetic, and photogrammetric knowledge and methods in scientific research and their effective use in the practice of modern production allow the international community to achieve high results. The main directions of educational programs at the Department of Geodesy and Cartography are preservation and further development of the rich heritage of scientific and pedagogical achievements of higher cartographical education in Ukraine; the study and involvement in the educational process of the best achievements of foreign higher education; preparation and updating of scientific and methodological support of educational process; modernization of material and technical basis for the learning process and field training practices; involvement of new professional teaching staff; training of the faculty staff. The demand on mapping courses and related workshops at the Department of Geodesy and Cartography Geography Department is determined by certain factors: the growth of interdisciplinary research involving extensive mapping component; growing of demand for mapping and GIS products from scientific, practical, commercial, and educational institutions; the need to increase productivity in the field of cartography, geoinformatics and adjacent to their fields of study and practice; issues of general improvement of

  14. Integron, Plasmid and Host Strain Characteristics of Escherichia coli from Humans and Food Included in the Norwegian Antimicrobial Resistance Monitoring Programs.

    Science.gov (United States)

    Sunde, Marianne; Simonsen, Gunnar Skov; Slettemeås, Jannice Schau; Böckerman, Inger; Norström, Madelaine

    2015-01-01

    Antimicrobial resistant Escherichia coli (n=331) isolates from humans with bloodstream infections were investigated for the presence of class 1 and class 2 integrons. The integron cassettes arrays were characterized and the findings were compared with data from similar investigations on resistant E. coli from meat and meat products (n=241) produced during the same time period. All isolates were obtained from the Norwegian monitoring programs for antimicrobial resistance in human pathogens and in the veterinary sector. Methods used included PCR, sequencing, conjugation experiments, plasmid replicon typing and subtyping, pulsed-field-gel-electrophoresis and serotyping. Integrons of class 1 and 2 occurred significantly more frequently among human isolates; 45.4% (95% CI: 39.9-50.9) than among isolates from meat; 18% (95% CI: 13.2 -23.3), (pfood source and from a human clinical sample highlights the possible role of meat as a source of resistance elements for pathogenic bacteria.

  15. Reorganizing the Instructional Reading Components: Could There Be a Better Way to Design Remedial Reading Programs to Maximize Middle School Students with Reading Disabilities' Response to Treatment?

    Science.gov (United States)

    Calhoon, Mary Beth; Sandow, Alexia; Hunter, Charles V.

    2010-01-01

    The primary purpose of this study was to explore if there could be a more beneficial method in organizing the individual instructional reading components (phonological decoding, spelling, fluency, and reading comprehension) within a remedial reading program to increase sensitivity to instruction for middle school students with reading disabilities…

  16. Developing a Staff Physical Activity Program at Your School: Implementing the Lesser-Used Component of the CSPAP Model

    Science.gov (United States)

    Langley, Katherine; Kulinna, Pamela Hodges

    2018-01-01

    The purpose of this article is to explore staff physical activity programs in the school setting, describe a viable option for a staff walking program in an elementary school, and determine elementary school staff members' participation and perceptions in one such program. Previous research has shown that placing a focus on staff involvement and…

  17. Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

    Science.gov (United States)

    Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

    2014-01-01

    WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

  18. Trial application of the candidate root cause categorization scheme and preliminary assessment of selected data bases for the root causes of component failures program

    International Nuclear Information System (INIS)

    Bruske, S.Z.; Cadwallader, L.C.; Stepina, P.L.

    1985-04-01

    The objective of the Nuclear Regulatory Commission's (NRC) Root Causes of Component Failures Program is to develop and apply a categorization scheme for identifying root causes of failures for components that comprise safety and safety support systems of nuclear power plants. Results from this program will provide valuable input in the areas of probabilistic risk assessment, reliability assurance, and application of risk assessments in the inspection program. This report presents the trial application and assessment of the candidate root cause categorization scheme to three failure data bases: the In-Plant Reliability Data System (IPRDS), the Licensee Event Report (LER) data base, and the Nuclear Plant Reliability Data System (NPRDS). Results of the trial application/assessment show that significant root cause information can be obtained from these failure data bases

  19. Nutritional status and feeding-tube placement in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy-based larynx preservation program.

    Science.gov (United States)

    Bozec, Alexandre; Benezery, Karen; Chamorey, Emmanuel; Ettaiche, Marc; Vandersteen, Clair; Dassonville, Olivier; Poissonnet, Gilles; Riss, Jean-Christophe; Hannoun-Lévi, Jean-Michel; Chand, Marie-Eve; Leysalle, Axel; Saada, Esma; Sudaka, Anne; Haudebourg, Juliette; Hebert, Christophe; Falewee, Marie-Noelle; Demard, François; Santini, José; Peyrade, Frédéric

    2016-09-01

    The objective of the study is to evaluate the nutritional status and determine its impact on clinical outcomes in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy (ICT)-based larynx preservation program without prophylactic feeding-tube placement. All patients with locally advanced (T3/4, N0-3, M0) hypopharyngeal squamous cell carcinoma, technically suitable for total pharyngolaryngectomy, treated by docetaxel, cisplatin and 5-fluorouracil (TPF)-ICT for larynx preservation at our institution between 2004 and 2013, were included in this retrospective study. Patients' nutritional status was closely monitored. Enteral nutrition was used if and when a patient was unable to sustain per-oral nutrition and hydration. The impact of nutritional status on clinical outcomes was investigated in univariate and multivariate analysis. A total of 53 patients (42 men and 11 women, mean age = 58.6 ± 8.2 years) were included in this study. Six (11.3 %) patients had lost more than 10 % of their usual body weight before therapy. Compared with patients' usual weight, the mean maximum patient weight loss during therapeutic management was 8.7 ± 4.5 kg. Enteral nutrition was required in 17 patients (32 %). We found no influence of the tested nutritional status-related factors on response to ICT, toxicity of ICT, overall, cause-specific and recurrence-free survival, and on post-therapeutic swallowing outcome. Maximum weight loss was significantly associated with a higher risk of enteral tube feeding during therapy (p = 0.03) and of complications (grade ≥3, p = 0.006) during RT. Without prophylactic feeding-tube placement, approximately one-third of the patients required enteral nutrition. There was no significant impact of nutritional status on oncologic or functional outcomes.

  20. Human rotavirus vaccine is highly efficacious when coadministered with routine expanded program of immunization vaccines including oral poliovirus vaccine in Latin America.

    Science.gov (United States)

    Tregnaghi, Miguel W; Abate, Héctor J; Valencia, Alejandra; Lopez, Pio; Da Silveira, Themis Reverbel; Rivera, Luis; Rivera Medina, Doris Maribel; Saez-Llorens, Xavier; Gonzalez Ayala, Silvia Elena; De León, Tirza; Van Doorn, Leen-Jan; Pilar Rubio, Maria Del; Suryakiran, Pemmaraju Venkata; Casellas, Javier M; Ortega-Barria, Eduardo; Smolenov, Igor V; Han, Htay-Htay

    2011-06-01

    The efficacy of a rotavirus vaccine against severe rotavirus gastroenteritis when coadministered with routine Expanded Program on Immunization (EPI) vaccines including oral polio vaccine (OPV) was evaluated in this study. Double-blind, randomized (2:1), placebo-controlled study conducted across 6 Latin American countries. Healthy infants (N = 6568) 6 to 12 weeks of age received 2 doses of RIX4414 vaccine or placebo following a 0, 1- to 2-month schedule. Routine vaccines including OPV were coadministered according to local EPI schedule. Vaccine efficacy (VE) against severe rotavirus gastroenteritis caused by circulating wild-type rotavirus from 2 weeks post-Dose 2 until 1 year of age was calculated with 95% confidence interval [CI]. Safety was assessed during the entire study period. Immunogenicity of RIX4414 and OPV was also assessed. During the efficacy follow-up period (mean duration = 7.4 months), 7 and 19 cases of severe rotavirus gastroenteritis were reported in the vaccine and placebo groups, respectively, with a VE of 81.6% (95% CI: 54.4-93.5). VE against severe rotavirus gastroenteritis caused by G1 type was 100% (95% CI: rotavirus types, respectively. There was no difference (P = 0.514) in the incidence of serious adverse events reported in the 2 groups. Antirotavirus IgA seropositivity rate at 1 to 2 months post-Dose 2 was 61.4% (95% CI: 53.7-68.6) in the RIX4414 group; similar seroprotection rates (≥96.0%) against the 3 antipoliovirus types was observed 1 month post-Dose 3 of OPV in both groups. RIX4414 was highly efficacious against severe rotavirus gastroenteritis caused by the circulating wild-type rotavirus (G1 and non-G1) when coadministered with routine EPI vaccines including OPV.

  1. Predictive factors of adherence to frequency and duration components in home exercise programs for neck and low back pain: an observational study

    Directory of Open Access Journals (Sweden)

    Jimeno-Serrano Francisco J

    2009-12-01

    Full Text Available Abstract Background Evidence suggests that to facilitate physical activity sedentary people may adhere to one component of exercise prescriptions (intensity, duration or frequency without adhering to other components. Some experts have provided evidence for determinants of adherence to different components among healthy people. However, our understanding remains scarce in this area for patients with neck or low back pain. The aims of this study are to determine whether patients with neck or low back pain have different rates of adherence to exercise components of frequency per week and duration per session when prescribed with a home exercise program, and to identify if adherence to both exercise components have distinct predictive factors. Methods A cohort of one hundred eighty-four patients with chronic neck or low back pain who attended physiotherapy in eight primary care centers were studied prospectively one month after intervention. The study had three measurement periods: at baseline (measuring characteristics of patients and pain, at the end of physiotherapy intervention (measuring characteristics of the home exercise program and a month later (measuring professional behaviors during clinical encounters, environmental factors and self-efficacy, and adherence behavior. Results Adherence to duration per session (70.9% ± 7.1 was more probable than adherence to frequency per week (60.7% ± 7.0. Self-efficacy was a relevant factor for both exercise components (p Conclusion We have shown in a clinic-based study that adherence to exercise prescription frequency and duration components have distinct levels and predictive factors. We recommend additional study, and advise that differential attention be given in clinical practice to each exercise component for improving adherence.

  2. MRI: Modular reasoning about interference in incremental programming

    OpenAIRE

    Oliveira, Bruno C. D. S; Schrijvers, Tom; Cook, William R

    2012-01-01

    Incremental Programming (IP) is a programming style in which new program components are defined as increments of other components. Examples of IP mechanisms include: Object-oriented programming (OOP) inheritance, aspect-oriented programming (AOP) advice and feature-oriented programming (FOP). A characteristic of IP mechanisms is that, while individual components can be independently defined, the composition of components makes those components become tightly coupled, sh...

  3. French plutonium management program

    International Nuclear Information System (INIS)

    Greneche, D.

    2002-01-01

    The French plutonium management program is summarized in this paper. The program considers nuclear generation as a major component of national electric power supply and includes the reprocessing of the spent fuel. (author)

  4. Continuous and semicontinuous monitoring techniques for particulate matter mass and chemical components: a synthesis of findings from EPA's Particulate Matter Supersites Program and related studies.

    Science.gov (United States)

    Solomon, Paul A; Sioutas, Constantinos

    2008-02-01

    The U.S. Environmental Protection Agency (EPA) established the Particulate Matter (PM) Supersites Program to provide key stakeholders (government and private sector) with significantly improved information needed to develop effective and efficient strategies for reducing PM on urban and regional scales. All Supersites projects developed and evaluated methods and instruments, and significant advances have been made and applied within these programs to yield new insights to our understanding of PM accumulation in air as well as improved source-receptor relationships. The tested methods include a variety of continuous and semicontinuous instruments typically with a time resolution of an hour or less. These methods often overcome many of the limitations associated with measuring atmospheric PM mass concentrations by daily filter-based methods (e.g., potential positive or negative sampling artifacts). Semicontinuous coarse and ultrafine mass measurement methods also were developed and evaluated. Other semicontinuous monitors tested measured the major components of PM such as nitrate, sulfate, ammonium, organic and elemental carbon, trace elements, and water content of the aerosol as well as methods for other physical properties of PM, such as number concentration, size distribution, and particle density. Particle mass spectrometers, although unlikely to be used in national routine monitoring networks in the foreseeable future because of their complex technical requirements and cost, are mentioned here because of the wealth of new information they provide on the size-resolved chemical composition of atmospheric particles on a near continuous basis. Particle mass spectrometers likely represent the greatest advancement in PM measurement technology during the last decade. The improvements in time resolution achieved by the reported semicontinuous methods have proven to be especially useful in characterizing ambient PM, and are becoming essential in allowing scientists to

  5. How do eHealth Programs for Adolescents With Depression Work? A Realist Review of Persuasive System Design Components in Internet-Based Psychological Therapies.

    Science.gov (United States)

    Wozney, Lori; Huguet, Anna; Bennett, Kathryn; Radomski, Ashley D; Hartling, Lisa; Dyson, Michele; McGrath, Patrick J; Newton, Amanda S

    2017-08-09

    Major depressive disorders are common among adolescents and can impact all aspects of their daily life. Traditional therapies, cognitive behavioral therapy (CBT), and interpersonal psychotherapy (IPT) have been delivered face-to-face. However, Internet-based (online) delivery of these therapies is emerging as an option for adolescents. Internet-based CBT and IPT involve therapeutic content, interaction between the user and the system, and different technological features embedded into the online program (eg, multimedia). Studies of Internet-based CBT and IPT for adolescent depression differ on all three aspects, and variable, positive therapy effects have been reported. A better understanding of the treatment conditions that influence therapy outcomes is important to designing and evaluating these novel therapies. Our aim was to examine the technological and program delivery features of Internet-based CBT and IPT for adolescent depression and to document their potential relation to treatment outcomes and program use. We performed a realist synthesis. We started with an extensive search of published and gray literature. We included intervention studies that evaluated Internet-based CBT or IPT for adolescent depression. We included mixed-methods and qualitative studies, theoretical papers, and policy/implementation documents if they included a focus on how Internet-based psychological therapy is proposed to work for adolescents with depression/depressive symptoms. We used the Mixed-Methods Appraisal Tool to assess the methodological quality of studies. We used the Persuasive System Design (PSD) model as a framework for data extraction and analysis to examine how Internet-based CBT and IPT, as technology-based systems, influence the attitudes and behaviors of system users. PSD components described for the therapies were linked to reported outcomes using a cross-case comparison method and thematic synthesis. We identified 19 Internet-based CBT programs in 59 documents

  6. Development of a 2-h suicide prevention program for medical staff including nurses and medical residents: A two-center pilot trial.

    Science.gov (United States)

    Nakagami, Yukako; Kubo, Hiroaki; Katsuki, Ryoko; Sakai, Tomomichi; Sugihara, Genichi; Naito, Chisako; Oda, Hiroyuki; Hayakawa, Kohei; Suzuki, Yuriko; Fujisawa, Daisuke; Hashimoto, Naoki; Kobara, Keiji; Cho, Tetsuji; Kuga, Hironori; Takao, Kiyoshi; Kawahara, Yoko; Matsumura, Yumi; Murai, Toshiya; Akashi, Koichi; Kanba, Shigenobu; Otsuka, Kotaro; Kato, Takahiro A

    2018-01-01

    Suicide is a crucial global health concern and effective suicide prevention has long been warranted. Mental illness, especially depression is the highest risk factor of suicide. Suicidal risk is increased in people not only with mental illness but also with physical illnesses, thus medical staff caring for physically-ill patients are also required to manage people with suicidal risk. In the present study, we evaluated our newly developed suicide intervention program among medical staff. We developed a 2-h suicide intervention program for medical staff, based on the Mental Health First Aid (MHFA), which had originally been developed for the general population. We conducted this program for 74 medical staff members from 2 hospitals. Changes in knowledge, perceived skills, and confidence in early intervention of depression and suicide-prevention were evaluated using self-reported questionnaires at 3 points; pre-program, immediately after the program, and 1 month after program. This suicide prevention program had significant effects on improving perceived skills and confidence especially among nurses and medical residents. These significant effects lasted even 1 month after the program. Design was a single-arm study with relatively small sample size and short-term follow up. The present study suggests that the major target of this effective program is nurses and medical residents. Future research is required to validate the effects of the program with control groups, and also to assess long-term effectiveness and actual reduction in suicide rates. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

    Science.gov (United States)

    Barber, Larissa K; Cucalon, Maria S

    2017-12-01

    University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

  8. A three-component cognitive behavioural lifestyle program for preconceptional weight-loss in women with polycystic ovary syndrome (PCOS): a protocol for a randomized controlled trial.

    Science.gov (United States)

    Jiskoot, G; Benneheij, S H; Beerthuizen, A; de Niet, J E; de Klerk, C; Timman, R; Busschbach, J J; Laven, J S E

    2017-03-06

    Obesity in women with polycystic ovary syndrome (PCOS) negatively affects all clinical features, and a 5 to 10% weight loss has shown promising results on reproductive, metabolic and psychological level. Incorporating a healthy diet, increasing physical activity and changing dysfunctional thought patterns in women with PCOS are key points in losing weight. The biggest challenge in weight management programs is to achieve a reasonable and sustainable weight loss. The aim of this study is to explore whether Cognitive Behavioural Therapy (CBT) by a mental health professional, working in a multidisciplinary team with a dietician and a physical therapist (a three-component intervention), is more effective for weight loss in the long term, within 12 months. We will also explore whether mobile phone applications are effective in supporting behavioural change and sustainable weight loss. The present study is a longitudinal randomized controlled trial (RCT) to study the effectiveness of a three-component 1-year cognitive-behavioural lifestyle intervention in overweight/obese women with PCOS. A total of 210 participants are randomly assigned to three groups: 1) CBT provided by the multidisciplinary team or; 2) CBT provided by the multidisciplinary team and Short Message Service (SMS) or; 3) usual care: encourage weight loss through publicly available services (control group). The primary aim of the 12-month intervention is to explore whether a three-component 1-year cognitive-behavioural lifestyle intervention is effective to decrease weight, when compared to usual care. Secondary outcomes include: the effect of the intervention on the PCOS phenotype, waist circumference, waist to hip ratio, ovulation rates, total testosterone, SHBG, free androgen index (FAI), AMH, hirsutism, acne, fasting glucose, blood pressure and all psychological parameters. Additionally, we assessed time to pregnancy, ongoing pregnancies, clinical pregnancies, miscarriages and birth weight. All

  9. Optimization of basic parameters in temperature-programmed gas chromatographic separations of multi-component samples within a given time

    NARCIS (Netherlands)

    Repka, D.; Krupcik, J.; Brunovska, A.; Leclercq, P.A.; Rijks, J.A.

    1989-01-01

    A new procedure is introduced for the optimization of column peak capacity in a given time. The opitmization focuses on temperature-programmed operating conditions, notably the initial temperature and hold time, and the programming rate. Based conceptually upon Lagrange functions, experiments were

  10. Formative assessment in the development of an obesity prevention component for the Expanded Food and Nutrition Education Program in Texas

    Science.gov (United States)

    This study conducted formative research (surveys, focus groups); to assess the nutrition education needs of clients in the Texas Expanded Food and Nutrition Education Program prior to curriculum revision. Current participants in the Expanded Food and Nutrition Education Program from 3 Texas cities (...

  11. THE INFLUENCE OF COMBINATION NON-MEDICAL TREATMENT INCLUDING FUNCTIONAL PROGRAMMED ELECTRICAL STIMULATION ON THE CLINICAL AND INSTRUMENTAL PARAMETERS IN PATIENTS WITH CEREBRAL PALSY WITH SPASTIC DIPLEGIA

    Directory of Open Access Journals (Sweden)

    V. V. Eliseev

    2015-01-01

    Full Text Available Background: Cerebral palsy is the leading cause of physical disability in pediatric  age. The search for new methods and improvement of old rehabil- itation techniques is ongoing, due to low efficacy of the latter. Aim: To assess the efficacy of a func- tional programmed electrical muscle stimulation as a part  of combination treatment of patients with cerebral palsy in the form of spastic diplegia. Materials and methods: We analyzed the results of treatment of 71 children with cerebral palsy and spastic diplegia, who had  been  randomized  into two groups  depending on the type of treatment. In  the  first group,  the  patients  (n = 38 received a course of functional programmed electric stim- ulation  in combination with  other  non-medical treatment  methods.  The  second   group   (n = 33 underwent a usual  course  of electrical  stimula- tion in combination with non-medical  treatment, similar to that  in the first group. The third group (control   included   41   children   without    cere- bral palsy. Clinical and  instrumental parameters were  assessed  in all study  participants. Results: After the course of combination treatment in the group  1, the  tonus  of m. gastrocnemius was de- creased significantly by 41%, that of the posterior group  of femur muscles by 43%, adductor group of femur muscles by 36%. In the group  2, the re- spective parameters decreased by 24, 21 and 21%. Muscle power  endurance was  increased  signifi- cantly in patients of both groups: that of long back extensors by 12.5 and 6.2 sec, of m. rectus abdomi- nis by 10.6 sec and 5.2 sec, of gluteal muscles by 9.3 and 4.6 sec, of m. quadriceps  by 19.8 and 7.2 sec, of m. anterior  tibialis by 12.1 and 4.6 sec, respec- tively. After the  treatment, the  active movement volume in the large joints of lower extremities  in the group 1 patients  improved as follows: by 15.6° in hip joints, by 11.1° in knee joints and by

  12. Incorporating Language Structure in a Communicative Task: An Analysis of the Language Component of a Communicative Task in the LINC Home Study Program

    Science.gov (United States)

    Lenchuk, Iryna

    2014-01-01

    The purpose of this article is to analyze a task included in the LINC Home Study (LHS) program. LHS is a federally funded distance education program offered to newcomers to Canada who are unable to attend regular LINC classes. A task, in which a language structure (a gerund) is chosen and analyzed, was selected from one instructional module of LHS…

  13. Analyzing best practices in employee health management: how age, sex, and program components relate to employee engagement and health outcomes.

    Science.gov (United States)

    Terry, Paul E; Grossmeier, Jessica; Mangen, David J; Gingerich, Stefan B

    2013-04-01

    Examine the influence of employee health management (EHM) best practices on registration, participation, and health behavior change in telephone-based coaching programs. Individual health assessment data, EHM program data, and health coaching participation data were analyzed for associations with coaching program enrollment, active participation, and risk reduction. Multivariate analyses occurred at the individual (n = 205,672) and company levels (n = 55). Considerable differences were found in how age and sex impacted typical EHM evaluation metrics. Cash incentives for the health assessment were associated with more risk reduction for men than for women. Providing either a noncash or a benefits-integrated incentive for completing the health assessment, or a noncash incentive for lifestyle management, strengthened the relationship between age and risk reduction. In EHM programs, one size does not fit all. These results can help employers tailor engagement strategies for their specific population.

  14. Regional target program «Veteran’ eyesight» as a component of native system of social protection for population

    Directory of Open Access Journals (Sweden)

    O. O. Rozhko

    2014-06-01

    System of social protection for population in Ukraine is focused on provision of wide facilities for participation of the most vulnerable people, in particular, invalids, in social-economical and political life of society, realization of their intellectual and physical potential, creation of conditions for their normal vital activity. By this reason, public and local government authorities work out correspondent social protection programs. Program «Veteran’ Eyesight» is considered to be a novel one by its nature among such programs, during period of independence. Public authorities’ initiative was realized at the regional level for the first time in Ukraine; it dealt with conduction of address examination, diagnostics, and provision of invalids and veterans of the Great Patriotic War with remedies for eyesight correction by financial support from state budget. Principles of public administration were applied during «Veteran’ Eyesight» program realization for maximization of social effect.

  15. Attitudes of Oregon Vocational Agriculture Teachers Toward the Supervised Occupational Experience Program Component of the Vocational Agriculture Curriculum.

    Science.gov (United States)

    Herren, Ray; Cole, Lee

    1984-01-01

    The main purpose of the study was to determine the attitudes of Oregon vocational agriculture teachers toward supervised occupational experience programs in light of the present economic climate. (JOW)

  16. CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User's manual to Version 1b (including program reference)

    International Nuclear Information System (INIS)

    Chen, T.F.; Gerhard, M.A.; Trummer, D.J.; Johnson, G.L.; Mok, G.C.

    1995-02-01

    CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user's manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers with a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests

  17. TIMTEM - a digital program for the calculation of two-dimensional, non-linear temperature fields of reactor components of complex structure taking into account inhomogeneity and anisotropy

    International Nuclear Information System (INIS)

    Simon-Weidner, J.

    1975-05-01

    The digital program TIMTEM calculates twodimensional, nonlinear temperature fields of reactor components of complex structure; inhomogeneity and anisotropy are taken into account. Systems consisting of different materials and therefore having different temperature- and/or time-dependent material characteristics are allowed. Various local, time- and/or temperature-dependent boundary conditions can be considered, too, which may be locally different from each other or can be interconnected. (orig.) [de

  18. Pre- and post-calculations for crack opening and leak rate experiments on piping components within the HDR-program

    International Nuclear Information System (INIS)

    Grebner, H.; Hoefler, A.; Hunger, H.

    1991-01-01

    In this paper calculations to experiments on leak opening and leak rates of piping components are presented. The experiments are performed at the HDR-facility at Karlstein/Germany and up to now straight pipes and pipe branches were considered. Numerical and experimental results are compared. (author)

  19. National Coral Reef Monitoring Program: Stratified Random Surveys (StRS) of Reef Fish, including Benthic Estimate Data of the Mariana Archipelago in 2014 (NCEI Accession 0157596)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data provided in this data set were collected as part of the NOAA Pacific Islands Fisheries Science Center (PIFSC), Coral Reef Ecosystem Program (CREP) led NCRMP...

  20. Programming

    OpenAIRE

    Jackson, M A

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, thi...

  1. Changes in selected physical, motor performance and anthropometric components of university-level rugby players after one microcycle of a combined rugby conditioning and plyometric training program.

    Science.gov (United States)

    Pienaar, Cindy; Coetzee, Ben

    2013-02-01

    The purpose of this study was to determine the effects of a microcycle (4 weeks) combined rugby conditioning plyometric compared with a nonplyometric rugby conditioning program on selected physical and motor performance components and anthropometric measurements of university-level rugby players. Players (18.94 ± 0.40 years) were assigned to either a control (n = 16) or experimental group (n = 19) from the U/19 rugby teams of the North-West University (South Africa). Twenty-six direct and indirect anthropometric measurements were taken, and the players performed a battery of 5 physical and motor performance tests before and after a microcycle (4 week) combined rugby conditioning plyometric (experimental group) and a nonplyometric rugby conditioning program (control group). The dependent t-test results showed that the control group's upper-body explosive power decreased significantly, whereas the stature, skeletal mass, and femur breadth increased significantly from pre- to posttesting. The experimental group showed significant increases in wrist breadth, speed over 20 m, agility, and power and work measurements of the Wingate anaerobic test (WAnT). Despite these results, the independent t-test revealed that speed over 20 m, average power output at 20 seconds, relative work of the WAnT, and agility were the only components of the experimental group that improved significantly more than the control group. A microcycle combined rugby conditioning plyometric program therefore leads to significantly bigger changes in selected physical and motor performance components of university-level rugby players than a nonplyometric rugby conditioning program alone. Based on these findings, coaches and sport scientists should implement 3 weekly combined rugby conditioning plyometric programs in rugby players' training regimens to improve the players' speed, agility, and power.

  2. XUV synchrotron optical components for the Advanced Light Source: Summary of the requirements and the developmental program

    International Nuclear Information System (INIS)

    McKinney, W.; Irick, S.; Lunt, D.

    1992-07-01

    We give a brief summary of the requirements for water cooled optical components for the Advanced Light Source (ALS), a third generation synchrotron radiation source under construction at Lawrence Berkeley Laboratory (LBL). Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from a finished water cooled copper alloy mirror will be used to demonstrate the state of the art in optical metrology with the Takacs Long Trace Profiler (LTP II)

  3. A quality monitoring program for red blood cell components: in vitro quality indicators before and after implementation of semiautomated processing.

    Science.gov (United States)

    Acker, Jason P; Hansen, Adele L; Kurach, Jayme D R; Turner, Tracey R; Croteau, Ioana; Jenkins, Craig

    2014-10-01

    Canadian Blood Services has been conducting quality monitoring of red blood cell (RBC) components since 2005, a period spanning the implementation of semiautomated component production. The aim was to compare the quality of RBC components produced before and after this production method change. Data from 572 RBC units were analyzed, categorized by production method: Method 1, RBC units produced by manual production methods; Method 2, RBC units produced by semiautomated production and the buffy coat method; and Method 3, RBC units produced by semiautomated production and the whole blood filtration method. RBC units were assessed using an extensive panel of in vitro tests, encompassing regulated quality control criteria such as hematocrit (Hct), hemolysis, and hemoglobin (Hb) levels, as well as adenosine triphosphate, 2,3-diphosphoglycerate, extracellular K(+) and Na(+) levels, methemoglobin, p50, RBC indices, and morphology. Throughout the study, all RBC units met mandated Canadian Standards Association guidelines for Hb and Hct, and most (>99%) met hemolysis requirements. However, there were significant differences among RBC units produced using different methods. Hb content was significantly lower in RBC units produced by Method 2 (51.5 ± 5.6 g/unit; p levels were lowest in units produced by Method 1 (p < 0.001). While overall quality was similar before and after the production method change, the observed differences, although small, indicate a lack of equivalency across RBC products manufactured by different methods. © 2014 AABB.

  4. The Effects of a Multi-Component Higher-Functioning Autism Anti-Stigma Program on Adolescent Boys

    Science.gov (United States)

    Staniland, Jessica J.; Byrne, Mitchell K.

    2013-01-01

    A six-session higher-functioning autism anti-stigma program incorporating descriptive, explanatory and directive information was delivered to adolescent boys and the impact upon knowledge, attitudes and behavioural intentions towards peers with autism was evaluated. Participants were seventh-, eighth- and ninth-grade students (N = 395) from…

  5. The effects of a multi-component higher-functioning autism anti-stigma program on adolescent boys.

    Science.gov (United States)

    Staniland, Jessica J; Byrne, Mitchell K

    2013-12-01

    A six-session higher-functioning autism anti-stigma program incorporating descriptive, explanatory and directive information was delivered to adolescent boys and the impact upon knowledge, attitudes and behavioural intentions towards peers with autism was evaluated. Participants were seventh-, eighth- and ninth-grade students (N = 395) from regular classes in a mainstream school. Two-eighth-grade classes were randomly allocated to the intervention condition and all remaining students were either allocated to the no-intervention peer or no-intervention non-peer condition. The anti-stigma program improved the knowledge and attitudes, but not the behavioural intentions of participants towards their peers with autism. Knowledge and attitudinal changes were maintained at follow-up. There were no spill-over effects of the program to non-targeted students. These results provide some preliminary evidence for the effectiveness of multi-session anti-stigma programs incorporating combined information for adolescent students in inclusive educational environments.

  6. Directory of Regional Centers and Educational Programs Providing Services to Deaf/Blind Children and Youth in the United States (Including Puerto Rico and the Virgin Islands).

    Science.gov (United States)

    Alonso, Lou, Comp.

    Listed in the directory are over 200 educational programs and services for deaf blind children in the United States and U. S. territories. It is noted that the 10 coordinators of regional centers for services to deaf blind children have aided in compilation of the directory. Listings are arranged by state within the New England, Mid-Atlantic…

  7. Programming

    International Nuclear Information System (INIS)

    Jackson, M.A.

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

  8. Transcriptional program of ciliated epithelial cells reveals new cilium and centrosome components and links to human disease.

    Directory of Open Access Journals (Sweden)

    Ramona A Hoh

    Full Text Available Defects in the centrosome and cilium are associated with a set of human diseases having diverse phenotypes. To further characterize the components that define the function of these organelles we determined the transcriptional profile of multiciliated tracheal epithelial cells. Cultures of mouse tracheal epithelial cells undergoing differentiation in vitro were derived from mice expressing GFP from the ciliated-cell specific FOXJ1 promoter (FOXJ1:GFP. The transcriptional profile of ciliating GFP+ cells from these cultures was defined at an early and a late time point during differentiation and was refined by subtraction of the profile of the non-ciliated GFP- cells. We identified 649 genes upregulated early, when most cells were forming basal bodies, and 73 genes genes upregulated late, when most cells were fully ciliated. Most, but not all, of known centrosome proteins are transcriptionally upregulated early, particularly Plk4, a master regulator of centriole formation. We found that three genes associated with human disease states, Mdm1, Mlf1, and Dyx1c1, are upregulated during ciliogenesis and localize to centrioles and cilia. This transcriptome for mammalian multiciliated epithelial cells identifies new candidate centrosome and cilia proteins, highlights similarities between components of motile and primary cilia, and identifies new links between cilia proteins and human disease.

  9. The results of the program to change the cognitive component of social representations about the consequences of drug use in adolescents

    Directory of Open Access Journals (Sweden)

    M.P. Ryabov

    2013-07-01

    Full Text Available We argue the need of development and implementation of informational programs to focus drug prevention in adolescents due to the fact that the researchers neglected the distortion of knowledge and ideas about the consequences of drug use. The results of the program aimed at change the cognitive component of social representations of teenagers about taking drugs are presented. The program implemented in general education school is based on informational approach: a video is shown about the consequences of drug use on human health and life. The study involved 158 adolescents aged 15 to 18 years, students of 9th and 11th grades. As a result of the program, we recorded a significant reduction in the desire of teens to try drugs, their increased knowledge about the consequences of drug use, change in the hierarchy of consequences of initiation to drugs important for adolescents, and their life orientations. We identified and described age-and gender-specific impact of the program on the study parameters.

  10. THE ANALYSIS OF EFFECTIVENESS OF CORRECTIVE PROGRAM OF FORMING OF COMPONENTS OF PROFESSIONAL SELF-DEVELOPMENT OF FUTURE PRIMARY SCHOOL TEACHERS

    Directory of Open Access Journals (Sweden)

    Artem Smoliuk

    2017-07-01

    Full Text Available The analysis of effectiveness of corrective program of forming of components of professional self-development of future primary school teachers is made in the article. The methodological base of design of corrective program was the principles of systematic and genetic, personal and active, action approaches to the professional self-development, humanist theory of self- actualization and self-realization of the personality. The program, designed by author consisted of: diagnostic, forming and recovering, psychical and preventive and correctional, control blocks. In the psychical and preventive and correctional process the gaming technologies, which consist of numerous exercises and performed both individually and within groups, psychological actions and role games and quests, personality-oriented technologies of professional development were used. The conducted justification of effectiveness of corrective program showed, that the specially arranged events allowed to increase levels of such components of professional self-development of future primary school teachers as: need and motivational, reflexive and value and social-communicative. During the conducting of pedagogical correction the specially organized training as the addition to traditional educational forms were used. The objectives of such education are the following: the promotion of forming of subjective position of the personality about the professional promotion; the supporting of personal-professional development; the stimulating of upward professional mobility and career growth in the pedagogical activity; optimization of attitude to oneself as to the professional; the expansion of oriental level in the professional field; the actualization of personal resources in the professional self-development; help in passing of new professional status of future pedagogue; the prognostication of possible difficulties, which are related to the future pedagogical activity. Thus proved, that the

  11. Effects of a progressive resistance exercise program with high-speed component on the physical function of older women with sarcopenic obesity: a randomized controlled trial.

    Science.gov (United States)

    Vasconcelos, Karina S S; Dias, João M D; Araújo, Marília C; Pinheiro, Ana C; Moreira, Bruno S; Dias, Rosângela C

    2016-07-11

    Sarcopenic obesity is associated with disability in older people, especially in women. Resistance exercises are recommended for this population, but their efficacy is not clear. To evaluate the effects of a progressive resistance exercise program with high-speed component on the physical function of older women with sarcopenic obesity. Twenty-eight women 65 to 80 years old, with a body mass index ≥30kg/m2 and handgrip strength ≤21kg were randomly allocated to two groups. The experimental group underwent a 10-week resistance exercise program designed to improve strength, power, and endurance of lower-limb muscles, with open chain and closed chain exercises. The control group had their health status monitored through telephone calls. The primary outcomes were lower limb muscle performance measured by knee extensor strength, power and fatigue by isokinetic dynamometry, and mobility measured by the Short Physical Performance Battery and by gait velocity. The secondary outcome was health-related quality of life assessed by the SF-36 Questionnaire. The average rate of adherence was 85%, with few mild adverse effects. There were no significant between-group differences for any of the outcomes. In this study, a progressive resistance exercise program with high-speed component was not effective for improving the physical function of older women with sarcopenic obesity.

  12. TURTLE with MAD input (Trace Unlimited Rays Through Lumped Elements) -- A computer program for simulating charged particle beam transport systems and DECAY TURTLE including decay calculations

    Energy Technology Data Exchange (ETDEWEB)

    Carey, D.C.

    1999-12-09

    TURTLE is a computer program useful for determining many characteristics of a particle beam once an initial design has been achieved, Charged particle beams are usually designed by adjusting various beam line parameters to obtain desired values of certain elements of a transfer or beam matrix. Such beam line parameters may describe certain magnetic fields and their gradients, lengths and shapes of magnets, spacings between magnetic elements, or the initial beam accepted into the system. For such purposes one typically employs a matrix multiplication and fitting program such as TRANSPORT. TURTLE is designed to be used after TRANSPORT. For convenience of the user, the input formats of the two programs have been made compatible. The use of TURTLE should be restricted to beams with small phase space. The lumped element approximation, described below, precludes the inclusion of the effect of conventional local geometric aberrations (due to large phase space) or fourth and higher order. A reading of the discussion below will indicate clearly the exact uses and limitations of the approach taken in TURTLE.

  13. TURTLE with MAD input (Trace Unlimited Rays Through Lumped Elements) -- A computer program for simulating charged particle beam transport systems and DECAY TURTLE including decay calculations

    International Nuclear Information System (INIS)

    Carey, D.C.

    1999-01-01

    TURTLE is a computer program useful for determining many characteristics of a particle beam once an initial design has been achieved, Charged particle beams are usually designed by adjusting various beam line parameters to obtain desired values of certain elements of a transfer or beam matrix. Such beam line parameters may describe certain magnetic fields and their gradients, lengths and shapes of magnets, spacings between magnetic elements, or the initial beam accepted into the system. For such purposes one typically employs a matrix multiplication and fitting program such as TRANSPORT. TURTLE is designed to be used after TRANSPORT. For convenience of the user, the input formats of the two programs have been made compatible. The use of TURTLE should be restricted to beams with small phase space. The lumped element approximation, described below, precludes the inclusion of the effect of conventional local geometric aberrations (due to large phase space) or fourth and higher order. A reading of the discussion below will indicate clearly the exact uses and limitations of the approach taken in TURTLE

  14. A constraint logic programming approach to associate 1D and 3D structural components for large protein complexes.

    Science.gov (United States)

    Dal Palù, Alessandro; Pontelli, Enrico; He, Jing; Lu, Yonggang

    2007-01-01

    The paper describes a novel framework, constructed using Constraint Logic Programming (CLP) and parallelism, to determine the association between parts of the primary sequence of a protein and alpha-helices extracted from 3D low-resolution descriptions of large protein complexes. The association is determined by extracting constraints from the 3D information, regarding length, relative position and connectivity of helices, and solving these constraints with the guidance of a secondary structure prediction algorithm. Parallelism is employed to enhance performance on large proteins. The framework provides a fast, inexpensive alternative to determine the exact tertiary structure of unknown proteins.

  15. Altering Practices to Include Bimodal-bilingual (ASL-Spoken English) Programming at a Small School for the Deaf in Canada.

    Science.gov (United States)

    Priestley, Karen; Enns, Charlotte; Arbuckle, Shauna

    2018-01-01

    Bimodal-bilingual programs are emerging as one way to meet broader needs and provide expanded language, educational and social-emotional opportunities for students who are deaf and hard of hearing (Marschark, M., Tang, G. & Knoors, H. (Eds). (2014). Bilingualism and bilingual Deaf education. New York, NY: Oxford University Press; Paludneviciene & Harris, R. (2011). Impact of cochlear implants on the deaf community. In Paludneviciene, R. & Leigh, I. (Eds.), Cochlear implants evolving perspectives (pp. 3-19). Washington, DC: Gallaudet University Press). However, there is limited research on students' spoken language development, signed language growth, academic outcomes or the social-emotional factors associated with these programs (Marschark, M., Tang, G. & Knoors, H. (Eds). (2014). Bilingualism and bilingual Deaf education. New York, NY: Oxford University Press; Nussbaum, D & Scott, S. (2011). The cochlear implant education center: Perspectives on effective educational practices. In Paludneviciene, R. & Leigh, I. (Eds.) Cochlear implants evolving perspectives (pp. 175-205). Washington, DC: Gallaudet University Press. The cochlear implant education center: Perspectives on effective educational practices. In Paludnevicience & Leigh (Eds). Cochlear implants evolving perspectives (pp. 175-205). Washington, DC: Gallaudet University Press; Spencer, P. & Marschark, M. (Eds.) (2010). Evidence-based practice in educating deaf and hard-of-hearing students. New York, NY: Oxford University Press). The purpose of this case study was to look at formal and informal student outcomes as well as staff and parent perceptions during the first 3 years of implementing a bimodal-bilingual (ASL and spoken English) program within an ASL milieu at a small school for the deaf. Speech and language assessment results for five students were analyzed over a 3-year period and indicated that the students made significant positive gains in all areas, although results were variable. Staff and parent

  16. [A mental health awareness anti-stigma program including user-trainers has a significant impact on knowledge, beliefs and attitudes of job centre professionals in Paris].

    Science.gov (United States)

    Jouet, E; Moineville, M; Favriel, S; Leriche, P; Greacen, T

    2014-04-01

    Developing programs and actions to fight stigma and discrimination against people living with mental disorders is a priority both internationally and in France. Involving mental health service users in these anti-stigma programs has proved to be a key element for effective programs. The present study evaluates the impact of user-trainers in an anti-stigma campaign with job counselors on their knowledge, beliefs, and desire for social distance with regard to mental illness and the mentally ill. Eighty-nine professionals participated in eight mental health awareness days from December 2008 to June 2009. Each training day was built around two pedagogical units: firstly, a psychiatrist providing a theoretical overview of mental illness and care and secondly, user-trainers describing their point of view on mental illness and exchanging with participants. A questionnaire administered at the beginning and at the end of the mental health awareness day assessed the impact of the day on participants' knowledge, beliefs, and desire for social distance. Answers to open questions were evaluated using thematic qualitative analysis. The intervention had statistically significant positive effects on all three training objectives: knowledge, beliefs and desire for social distance. Analysis of qualitative data confirmed participants' need for information and training with regard to providing support to clients with mental health problems; participants frequently attributed their improved self-confidence at the end of the day with regard to providing job coaching for this population group to the presence of user-trainers. A mental health awareness day using mental health service users and psychiatrists as trainers had significant positive effects in terms of reducing stigma with regard to people with mental illness. Further research is needed to understand whether the impact of such awareness approaches can be maintained in everyday professional practice over time. Copyright © 2013

  17. NRC program for the resolution of generic issues related to nuclear power plants. (Includes plans for the resolution of ''unresolved safety issues'' pursuant to Section 210 of the Energy Reorganization Act of 1974, as amended)

    International Nuclear Information System (INIS)

    1977-12-01

    This report provides a description of the Nuclear Regulatory Commission's Program for the Resolution of Generic Issues Related to Nuclear Power Plants. The NRC program is of considerably broader scope than the ''Unresolved Safety Issues Plan'' required by Section 210. The NRC program does include plans for the resolution of ''Unresolved Safety Issues''; however, in addition, it includes generic tasks for the resolution of environmental issues, for the development of improvements in the reactor licensing process and for consideration of less conservative design criteria or operating limitations in areas where over conservatisms may be unnecessarily restrictive or costly

  18. A Long-Term Space Astrophysics Research Program. An X-Ray Perspective of the Components and Structure of Galaxies

    Science.gov (United States)

    Fabbiano, G.

    1998-01-01

    We present optical and archival X-ray data on the disturbed morphology radio elliptical NGC 1316 (Fornax A) that displays numerous low surface brightness shells, loops and tails. An extended (81x27 min or 9x3 kpc) emission line region (EELR) at a projected distance of 35 kpc from the nucleus has been discovered in a approximately 9Ox35 kpc, approximately 3.Ox1O(solar luminosity(B)) tidal tail. The position and extreme size of the EELR suggest it is related to the merger process. We suggest that the ionization mechanism of the EELR is shock excitation, and the gas is remnant from the merger progenitor. X-ray emission is detected near two tidal tails. Hot, approximately 5 x 10(exp 6)K gas is probably the predominant gas component in the tidal tail ISM. However based on the current tidal tail (cold + warm + hot) gas mass, a large fraction of the tidal tail progenitor gas may already reside in the nucleus of NGC 1316. The numerous and varied tidal tail system suggests that a disk-disk or disk-E merger could have taken place greater than or equal to 1 Gyr ago, whilst a low mass, gas rich galaxy started to merge approximately 0.5 Gyr ago.

  19. De-chlorination and solidification of radioactive LiCl waste salt by using SiO_2-Al_2O_3-P_2O_5 (SAP) inorganic composite including B_2O_3 component

    International Nuclear Information System (INIS)

    Lee, Ki Rak; Park, Hwan-Seo; Cho, In-Hak; Choi, Jung-Hoon; Eun, Hee-Chul; Lee, Tae-Kyo; Han, Seung Youb; Ahn, Do-Hee

    2017-01-01

    SAP (SiO_2-Al_2O_3-P_2O_5) composite has been recently studied in KAERI to deal with the immobilization of radioactive salt waste, one of the most problematic wastes in the pyro-chemical process. Highly unstable salt waste was successfully converted into stable compounds by the dechlorination process with SAPs, and then a durable waste form with a high waste loading was produced when adding glassy materials to dechlorination product. In the present study, U-SAP composite which is SAP bearing glassy component (Boron) was synthesized to remove the adding and mixing steps of glassy materials for a monolithic wasteform. With U-SAPs prepared by a sol-gel process, a series of wasteforms were fabricated to identify a proper reaction condition. Physical and chemical properties of dechlorination products and U-SAP wasteforms were characterized by XRD, DSC, SEM, TGA and PCT-A. A U-SAP wasteform showed suitable properties as a radioactive wasteform such as dense surface morphology, high waste loading, and high durability at the optimized U-SAP/salt ratio 2.

  20. The Necessary Components of a Staff Development Program to Prepare Teachers to Teach Secondary Online Classes: a Delphi Study

    OpenAIRE

    Davidson, John Wesley

    2005-01-01

    Educators are faced with the rapid influx of online courses in the K-12 educational setting. The majority of research conducted to date has been in the area of higher education. Research and publications suggest that many factors control the success or failure of students enrolled in online courses. These factors include student characteristics, mentoring, and teacher/student interaction. Other factors affect the implementation of successful online courses and virtual schools. These factors i...

  1. Components of an effective large scale program for the prevention of inherited hemoglobin disorders; the paradigm of Greece

    Directory of Open Access Journals (Sweden)

    D. Loukopoulos

    2012-12-01

    Full Text Available Large scale prevention programs for Thalassemia major or Sickle cell disease have already been set up in several places with high frequency of the deleterious genes. The Greek health authorities realized the magnitude of the problem and allowed the creation of a National Thalassemia Center in 1972. The incidence of thalassemia in Greece varies from 1-2 per cent up to 15%, the mean being around 8 per cent. With an annual number of births around 100,000, if no prevention measures are taken, the expected yearly number of newborns with thalassemia major in Greece should be of the order of 100-120. To these one should add a few decades of sickle cell patients, homozygotes or compound HbS/β-thalassemia heterozygotes. The total number of patients with thalassemia major now surviving is estimated at 4,000 plus another 600-800 patients with sickle cell disease. The National Thalassemia Center Center defined a network of peripheral Thalassemia Units in the major regional hospitals of the country, let them provide free carrier identification to couples requesting the test. When both partners were identified as carriers, they were given preliminary information locally and were referred to the Central Laboratory in Athens for further genetic counselling and, if so decided, prenatal diagnosis. Prenatal diagnosis was provided initially by fetoscopy and fetal blood biosynthesis; this approach was soon replaced by chorionic villi sampling and molecular techniques. The number of prenatal diagnoses carried out yearly over the last decade appears to cover the needs; the number of positive diagnoses is very close to the expected 25%, which also excludes overdiagnosis. The overall evaluation of the the program is reflected in the number of infants who were admitted to the pediatric clinics of the country in need of transfusion over the years the program was functioning. In fact, over the past years this number has steadily decreased to approximately 10 missed

  2. The experimental charge-density approach in the evaluation of intermolecular interactions. Application of a new module of the XD programming package to several solids including a pentapeptide.

    Science.gov (United States)

    Abramov, Y A; Volkov, A; Wu, G; Coppens, P

    2000-11-01

    A new module interfaced to the XD programming package has been used in the evaluation of intermolecular interactions and lattice energies of the crystals of p-nitroaniline, L-asparagine monohydrate and the pentapeptide Boc-Gln-D-Iva-Hyp-Ala-Phol (Boc = butoxycarbonyl, Iva = isovaline = ethylalanine, Phol = phenylalaninol). The electrostatic interactions are evaluated with the atom-centered distributed multipoles from KRMM (kappa'-restricted multipole model) refinements, using the Buckingham expression for non-overlapping charge densities. Results for p-nitroaniline are compared with Hartree-Fock (HF), density functional (DFT) and Moller-Plesset (MP2) supermolecular calculations and with HF and DFT periodic calculations. The HF and DFT methods fail to predict the stability of the p-nitroaniline crystal but the results of the experimental charge-density approach (ECDA) are in good agreement with both MP2 interaction energies and the experimental lattice energy. ECDA results for L-asparagine monohydrate compare well with those from DFT supermolecular and periodic HF calculations. The disorder of the terminal group in the pentapeptide, which persists at the experimental temperature of 20 K, corresponds to an energy difference of only 0.35 kJ mol(-1), which is too small to be reproduced with current methods.

  3. Impact of Biological Feedback and Incentives on Blood Fatty Acid Concentrations, Including Omega-3 Index, in an Employer-Based Wellness Program.

    Science.gov (United States)

    McBurney, Michael I; Bird, Julia K

    2017-08-05

    Eicosapentaenoic acid (EPA, C20:5n-3) and docosahexaenoic acid (DHA, C22:6n-3) are important fatty acids for the retina and brain. More than 95% of Americans have suboptimal EPA + DHA blood concentrations. This cross-sectional employer-based study assessed whole blood fatty acid levels of volunteers participating in an onsite wellness biometric screening program and was designed to determine if an incentive, a $5 coupon for a 90-day supply of fish oil supplement typically costing $18-30, stimulated incremental dietary behavior change relative to nutritional status assessment alone to increase EPA + DHA concentrations. Volunteers completed a dietary survey and finger stick blood samples were collected to be analyzed for fatty acid composition. In addition, 636 individuals participated in the initial onsite biometric screening. Three months later, and without prior knowledge, all employees were invited to a second screening. At the second screening, 198 employees volunteered for the first time and 149 employees had a second test (17.9%). At baseline, the average age ( n = 834) was 45 year and omega-3 index was 5.0% with 41% female. EPA + DHA concentration, i.e., omega-3 index, was significantly lower in men (4.8%) than women (5.2%), as were DHA and linoleic acid (LA) concentrations ( p omega-3 index was positively and linearly associated with omega-3 intake. Only 4% of volunteers had an omega-3 index >8% on initial screening. Among the 149 individuals with two measurements, omega-3 intake from supplements, but not food, increased significantly from 258 to 445 mg/d ( p omega-3 index (+0.21, p omega-3 supplement.

  4. Impact of Biological Feedback and Incentives on Blood Fatty Acid Concentrations, Including Omega-3 Index, in an Employer-Based Wellness Program

    Directory of Open Access Journals (Sweden)

    Michael I. McBurney

    2017-08-01

    Full Text Available Eicosapentaenoic acid (EPA, C20:5n-3 and docosahexaenoic acid (DHA, C22:6n-3 are important fatty acids for the retina and brain. More than 95% of Americans have suboptimal EPA + DHA blood concentrations. This cross-sectional employer-based study assessed whole blood fatty acid levels of volunteers participating in an onsite wellness biometric screening program and was designed to determine if an incentive, a $5 coupon for a 90-day supply of fish oil supplement typically costing $18–30, stimulated incremental dietary behavior change relative to nutritional status assessment alone to increase EPA + DHA concentrations. Volunteers completed a dietary survey and finger stick blood samples were collected to be analyzed for fatty acid composition. In addition, 636 individuals participated in the initial onsite biometric screening. Three months later, and without prior knowledge, all employees were invited to a second screening. At the second screening, 198 employees volunteered for the first time and 149 employees had a second test (17.9%. At baseline, the average age (n = 834 was 45 year and omega-3 index was 5.0% with 41% female. EPA + DHA concentration, i.e., omega-3 index, was significantly lower in men (4.8% than women (5.2%, as were DHA and linoleic acid (LA concentrations (p < 0.05. Baseline omega-3 index was positively and linearly associated with omega-3 intake. Only 4% of volunteers had an omega-3 index >8% on initial screening. Among the 149 individuals with two measurements, omega-3 intake from supplements, but not food, increased significantly from 258 to 445 mg/d (p < 0.01 at the second test as did the omega-3 index (+0.21, p < 0.02. In this employed population, only 1% redeemed a coupon for an omega-3 supplement.

  5. The WECHSL-Mod2 code: A computer program for the interaction of a core melt with concrete including the long term behavior

    International Nuclear Information System (INIS)

    Reimann, M.; Stiefel, S.

    1989-06-01

    The WECHSL-Mod2 code is a mechanistic computer code developed for the analysis of the thermal and chemical interaction of initially molten LWR reactor materials with concrete in a two-dimensional, axisymmetrical concrete cavity. The code performs calculations from the time of initial contact of a hot molten pool over start of solidification processes until long term basemat erosion over several days with the possibility of basemat penetration. The code assumes that the metallic phases of the melt pool form a layer at the bottom overlayed by the oxide melt atop. Heat generation in the melt is by decay heat and chemical reactions from metal oxidation. Energy is lost to the melting concrete and to the upper containment by radiation or evaporation of sumpwater possibly flooding the surface of the melt. Thermodynamic and transport properties as well as criteria for heat transfer and solidification processes are internally calculated for each time step. Heat transfer is modelled taking into account the high gas flux from the decomposing concrete and the heat conduction in the crusts possibly forming in the long term at the melt/concrete interface. The WECHSL code in its present version was validated by the BETA experiments. The test samples include a typical BETA post test calculation and a WECHSL application to a reactor accident. (orig.) [de

  6. Hot gas path component

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward

    2017-09-12

    Various embodiments of the disclosure include a turbomachine component. and methods of forming such a component. Some embodiments include a turbomachine component including: a first portion including at least one of a stainless steel or an alloy steel; and a second portion joined with the first portion, the second portion including a nickel alloy including an arced cooling feature extending therethrough, the second portion having a thermal expansion coefficient substantially similar to a thermal expansion coefficient of the first portion, wherein the arced cooling feature is located within the second portion to direct a portion of a coolant to a leakage area of the turbomachine component.

  7. The WECHSL-Mod3 code: A computer program for the interaction of a core melt with concrete including the long term behavior. Model description and user's manual

    International Nuclear Information System (INIS)

    Foit, J.J.; Adroguer, B.; Cenerino, G.; Stiefel, S.

    1995-02-01

    The WECHSL-Mod3 code is a mechanistic computer code developed for the analysis of the thermal and chemical interaction of initially molten reactor materials with concrete in a two-dimensional as well as in a one-dimensional, axisymmetrical concrete cavity. The code performs calculations from the time of initial contact of a hot molten pool over start of solidification processes until long term basemat erosion over several days with the possibility of basemat penetration. It is assumed that an underlying metallic layer exists covered by an oxidic layer or that only one oxidic layer is present which can contain a homogeneously dispersed metallic phase. Heat generation in the melt is by decay heat and chemical reactions from metal oxidation. Energy is lost to the melting concrete and to the upper containment by radiation or evaporation of sumpwater possibly flooding the surface of the melt. Thermodynamic and transport properties as well as criteria for heat transfer and solidification processes are internally calculated for each time step. Heat transfer is modelled taking into account the high gas flux from the decomposing concrete and the heat conduction in the crusts possibly forming in the long term at the melt/concrete interface. The CALTHER code (developed at CEA, France) which models the radiative heat transfer from the upper surface of the corium melt to the surrounding cavity is implemented in the present WECHSL version. The WECHSL code in its present version was validated by the BETA, ACE and SURC experiments. The test samples include a BETA and the SURC2 post test calculations and a WECHSL application to a reactor accident. (orig.) [de

  8. Eccentric versus traditional resistance exercise for older adult fallers in the community: a randomized trial within a multi-component fall reduction program.

    Science.gov (United States)

    LaStayo, Paul; Marcus, Robin; Dibble, Leland; Wong, Bob; Pepper, Ginette

    2017-07-17

    Addressing muscle deficits within a multi-component exercise fall reduction program is a priority, especially for the highest risk older adults, i.e., those who have fallen previously. Eccentric resistance exercise with its high-force producing potential, at a low energetic cost, may be ideally-suited to address muscle impairments in this population. The purpose of this study was to compare the effects of resistance exercise via negative, eccentrically-induced, work (RENEW) versus traditional (TRAD) resistance exercise on mobility, balance confidence, muscle power and cross sectional area, as well as the number of days high fall risk older adults survived without a fall event over a 1 year period. Randomized, two group, four time point (over 1 year) clinical trial testing RENEW versus TRAD as part of a 3 month multi-component exercise fall reduction program (MCEFRP). Primary outcomes of mobility, balance confidence, muscle power output and cross sectional area were analyzed using mixed effects modeling. The secondary outcomes of days to fall and days to near-fall were analyzed using survival analysis. The MCEFRP did have an effect on fall risk factors considered reversible with exercise interventions though there was no differential effect of RENEW versus TRAD (p = 0.896) on mobility, balance confidence, muscle power and cross sectional area. There were also no group differences in the number of days survived without a fall (p = 0.565) or near-fall (p = 0.678). Despite 100% of participants having at least one fall in the year prior to the MCEFRP, however, after 3 months of exercise and 9 months of follow-up fall or near fall. There were no differential effects of RENEW or TRAD as components of a MCEFRP on the primary or secondary outcomes. The two modes of resistance exercise had identical effects on fall risk and fall-free survival. NCT01080196 ; March 2, 2010 (retrospectively registered).

  9. The effect of a multi-component camp-based weight-loss program on children's motor skills and physical fitness

    DEFF Research Database (Denmark)

    Larsen, Kristian Traberg; Huang, Tao; Larsen, Lisbeth Runge

    2016-01-01

    BACKGROUND: Many weight-loss programs in children are performed without specific foci on training both physical fitness and motor skills. The aim of this study was to describe the effect of a one-year weight-loss program on children's motor skills and physical fitness. METHODS: Participants......-respiratory fitness test. Motor skills were assessed by the Movement Assessment Battery for Children - second edition (M-ABC-2), age band 3. RESULTS: Loss to follow-up after 52 weeks was 19 % and 32 % in the DCIA and SIA, respectively. Balance skills were improved post-camp, but not after 52 weeks in children from....... CONCLUSION: In conclusion, the day-camp intervention led to improvements in physical fitness but not in motor skills compared to the standard intervention. Including both motor skills and physical fitness could advantageously be considered in future immersive intervention programmes. TRIAL REGISTRATION...

  10. Design of a study evaluating the effects, health economics, and stakeholder perspectives of a multi-component occupational rehabilitation program with an added workplace intervention - a  study protocol.

    Science.gov (United States)

    Rise, Marit B; Skagseth, Martin; Klevanger, Nina E; Aasdahl, Lene; Borchgrevink, Petter; Jensen, Chris; Tenggren, Hanne; Halsteinli, Vidar; Jacobsen, Trym N; Løland, Svein B; Johnsen, Roar; Fimland, Marius S

    2018-02-05

    Recent research has suggested that interventions at the workplace might be the most potent ingredient in return to work interventions, but few studies have investigated the different effects of workplace interventions as part of occupational rehabilitation programs. The comprehensive design described in this article includes effect (on return to work and health outcomes), and health economic evaluations of a workplace intervention added to a multicomponent rehabilitation program. Qualitative and mixed method studies will investigate sick-listed persons', rehabilitation therapists' and employers' perspectives on the usability and outcomes of the rehabilitation program and the workplace intervention. The program and intervention are provided to patients with musculoskeletal, psychological or general and unspecified diagnoses. The program is multi-component and includes Acceptance and Commitment Therapy, physical exercise, patient education and creating a plan for increased work participation. Persons who are employed, aged from 18 to 60 years, with a current sick leave status of 50% or more and a diagnosis within the musculoskeletal, psychological or general and unspecified chapters of International Classification of Primary Care-2 (ICPC-2) will be recruited to a researcher-blinded parallel-group randomized controlled trial. All participants take part in an in-patient occupational rehabilitation program, while the intervention group also takes part in an intervention at the workplace. The effect and economic evaluation will investigate the effect of the added workplace intervention. The primary outcome measures will be time until full sustainable return to work and total number of sickness absence days in the 12 months after inclusion. Health economic evaluations will investigate the cost-effectiveness and cost-utility. Qualitative studies will investigate rehabilitation therapists' experiences with working towards return to work within an ACT-approach and

  11. Component design for LMFBR's

    International Nuclear Information System (INIS)

    Fillnow, R.H.; France, L.L.; Zerinvary, M.C.; Fox, R.O.

    1975-01-01

    Just as FFTF has prototype components to confirm their design, FFTF is serving as a prototype for the design of the commercial LMFBR's. Design and manufacture of critical components for the FFTF system have been accomplished primarily using vendors with little or no previous experience in supplying components for high temperature sodium systems. The exposure of these suppliers, and through them a multitude of subcontractors, to the requirements of this program has been a necessary and significant step in preparing American industry for the task of supplying the large mechanical components required for commercial LMFBR's

  12. Components selection for ageing management

    International Nuclear Information System (INIS)

    Mingiuc, C.; Vidican, D.

    2002-01-01

    Full text: The paper presents a synthesis of methods and activities realized for the selection of critical components to assure plant safety and availability (as electricity supplier). There are presented main criteria for selection, screening process. For the resulted categories of components shall be applied different category of maintenance (condition oriented, scheduled or corrective), function of the importance and financial effort necessary to fulfil the task. 1. Systems and components screening for plant safety assurance For the systems selection, from Safety point of view, was necessary first, to define systems which are dangerous in case of failure (mainly by rupture/ release of radioactivity) and the safety systems which have to mitigate the effects. This is realized based on accident analysis (from Safety Report). Also where taken in to account the 4 basic Safety Principles: 'Reactor shut down; Residual heat removal; Radioactivity products confinement; NPP status monitoring in normal and accident conditions'. Following step is to establish safety support systems, which have to action to assure main safety systems operation. This could be realized based on engineering judgement, or on PSA Level I analysis. Finally shall be realized chains of the support systems, which have to work, till primary systems. For the critical components selection, was realized a Failure Mode and Effect Analysis (FMEA), considering the components effects of failures, on system safety function. 2. Systems and components screening for plant availability assurance The work was realized in two steps: Systems screening; Components screening The systems screening, included: General, analyze of the plant systems list and the definition of those which clearly have to run continue to assure the nominal power; Realization of a complex diagram to define interdependence between the systems (e.g. PHT and auxiliaries, moderator and auxiliaries, plant electrical diagram); Fill of special

  13. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  14. The Feasibility of Embedding Data Collection into the Routine Service Delivery of a Multi-Component Program for High-Risk Young People.

    Science.gov (United States)

    Knight, Alice; Havard, Alys; Shakeshaft, Anthony; Maple, Myfanwy; Snijder, Mieke; Shakeshaft, Bernie

    2017-02-20

    There is little evidence about how to improve outcomes for high-risk young people, of whom Indigenous young people are disproportionately represented, due to few evaluation studies of interventions. One way to increase the evidence is to have researchers and service providers collaborate to embed evaluation into the routine delivery of services, so program delivery and evaluation occur simultaneously. This study aims to demonstrate the feasibility of integrating best-evidence measures into the routine data collection processes of a service for high-risk young people, and identify the number and nature of risk factors experienced by participants. The youth service is a rural based NGO comprised of multiple program components: (i) engagement activities; (ii) case management; (iii) diversionary activities; (iv) personal development; and (v) learning and skills. A best-evidence assessment tool was developed by staff and researchers and embedded into the service's existing intake procedure. Assessment items were organised into demographic characteristics and four domains of risk: education and employment; health and wellbeing; substance use; and crime. Descriptive data are presented and summary risk variables were created for each domain of risk. A count of these summary variables represented the number of co-occurring risks experienced by each participant. The feasibility of this process was determined by the proportion of participants who completed the intake assessment and provided research consent. This study shows 85% of participants completed the assessment tool demonstrating that data on participant risk factors can feasibly be collected by embedding a best-evidence assessment tool into the routine data collection processes of a service. The most prevalent risk factors were school absence, unemployment, suicide ideation, mental distress, substance use, low levels of physical activity, low health service utilisation, and involvement in crime or with the juvenile

  15. The Feasibility of Embedding Data Collection into the Routine Service Delivery of a Multi-Component Program for High-Risk Young People

    Directory of Open Access Journals (Sweden)

    Alice Knight

    2017-02-01

    Full Text Available Background: There is little evidence about how to improve outcomes for high-risk young people, of whom Indigenous young people are disproportionately represented, due to few evaluation studies of interventions. One way to increase the evidence is to have researchers and service providers collaborate to embed evaluation into the routine delivery of services, so program delivery and evaluation occur simultaneously. This study aims to demonstrate the feasibility of integrating best-evidence measures into the routine data collection processes of a service for high-risk young people, and identify the number and nature of risk factors experienced by participants. Methods: The youth service is a rural based NGO comprised of multiple program components: (i engagement activities; (ii case management; (iii diversionary activities; (iv personal development; and (v learning and skills. A best-evidence assessment tool was developed by staff and researchers and embedded into the service’s existing intake procedure. Assessment items were organised into demographic characteristics and four domains of risk: education and employment; health and wellbeing; substance use; and crime. Descriptive data are presented and summary risk variables were created for each domain of risk. A count of these summary variables represented the number of co-occurring risks experienced by each participant. The feasibility of this process was determined by the proportion of participants who completed the intake assessment and provided research consent. Results: This study shows 85% of participants completed the assessment tool demonstrating that data on participant risk factors can feasibly be collected by embedding a best-evidence assessment tool into the routine data collection processes of a service. The most prevalent risk factors were school absence, unemployment, suicide ideation, mental distress, substance use, low levels of physical activity, low health service utilisation

  16. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  17. Component Repair Times Obtained from MSPI Data

    International Nuclear Information System (INIS)

    Eide, Steven A.; Cadwallader, Lee

    2015-01-01

    Information concerning times to repair or restore equipment to service given a failure is valuable to probabilistic risk assessments (PRAs). Examples of such uses in modern PRAs include estimation of the probability of failing to restore a failed component within a specified time period (typically tied to recovering a mitigating system before core damage occurs at nuclear power plants) and the determination of mission times for support system initiating event (SSIE) fault tree models. Information on equipment repair or restoration times applicable to PRA modeling is limited and dated for U.S. commercial nuclear power plants. However, the Mitigating Systems Performance Index (MSPI) program covering all U.S. commercial nuclear power plants provides up-to-date information on restoration times for a limited set of component types. This paper describes the MSPI program data available and analyzes the data to obtain median and mean component restoration times as well as non-restoration cumulative probability curves. The MSPI program provides guidance for monitoring both planned and unplanned outages of trains of selected mitigating systems deemed important to safety. For systems included within the MSPI program, plants monitor both train UA and component unreliability (UR) against baseline values. If the combined system UA and UR increases sufficiently above established baseline results (converted to an estimated change in core damage frequency or CDF), a ''white'' (or worse) indicator is generated for that system. That in turn results in increased oversight by the US Nuclear Regulatory Commission (NRC) and can impact a plant's insurance rating. Therefore, there is pressure to return MSPI program components to service as soon as possible after a failure occurs. Three sets of unplanned outages might be used to determine the component repair durations desired in this article: all unplanned outages for the train type that includes the component of

  18. Component Repair Times Obtained from MSPI Data

    Energy Technology Data Exchange (ETDEWEB)

    Eide, Steven A. [Curtiss-Wright/Scietech, Ketchum, ID (United States); Cadwallader, Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Information concerning times to repair or restore equipment to service given a failure is valuable to probabilistic risk assessments (PRAs). Examples of such uses in modern PRAs include estimation of the probability of failing to restore a failed component within a specified time period (typically tied to recovering a mitigating system before core damage occurs at nuclear power plants) and the determination of mission times for support system initiating event (SSIE) fault tree models. Information on equipment repair or restoration times applicable to PRA modeling is limited and dated for U.S. commercial nuclear power plants. However, the Mitigating Systems Performance Index (MSPI) program covering all U.S. commercial nuclear power plants provides up-to-date information on restoration times for a limited set of component types. This paper describes the MSPI program data available and analyzes the data to obtain median and mean component restoration times as well as non-restoration cumulative probability curves. The MSPI program provides guidance for monitoring both planned and unplanned outages of trains of selected mitigating systems deemed important to safety. For systems included within the MSPI program, plants monitor both train UA and component unreliability (UR) against baseline values. If the combined system UA and UR increases sufficiently above established baseline results (converted to an estimated change in core damage frequency or CDF), a “white” (or worse) indicator is generated for that system. That in turn results in increased oversight by the US Nuclear Regulatory Commission (NRC) and can impact a plant’s insurance rating. Therefore, there is pressure to return MSPI program components to service as soon as possible after a failure occurs. Three sets of unplanned outages might be used to determine the component repair durations desired in this article: all unplanned outages for the train type that includes the component of interest, only

  19. Principal components

    NARCIS (Netherlands)

    Hallin, M.; Hörmann, S.; Piegorsch, W.; El Shaarawi, A.

    2012-01-01

    Principal Components are probably the best known and most widely used of all multivariate analysis techniques. The essential idea consists in performing a linear transformation of the observed k-dimensional variables in such a way that the new variables are vectors of k mutually orthogonal

  20. School Health: Findings from Evaluated Programs.

    Science.gov (United States)

    Public Health Service (DHHS), Rockville, MD. Office of Disease Prevention and Health Promotion.

    This publication presents findings from evaluations of many school health programs from across the United States. Each program includes at least one of the following eight components of a comprehensive school health program: health education, clinical services, counseling and mental health services, school environment, school food programs,…

  1. An Evaluation of "Success and Dyslexia"--A Multi Component School-Based Coping Program for Primary School Students with Learning Disabilities: Is It Feasible?

    Science.gov (United States)

    Firth, Nola Virginia; Frydenberg, Erica; Bond, Lyndal

    2012-01-01

    A learning disabilities coping program was implemented in the final year of two primary schools within the context of a whole class coping program and whole school learning disabilities professional development. Using data collected over three years from school surveys, reports, interviews, school documents and a field diary, this paper reports on…

  2. Faith Is Confidence: The Implication of Psychosocial Components in Faith-Based Educational Programs on Expressive Communication Skills of Adult Learners

    Science.gov (United States)

    Lynch, Erin M.

    2016-01-01

    Faith-based programs for adult learners have environmental factors that differentiate them from non-faith based programs, but explicit empirical studies evaluating the impact of the psychosocial factors have been lacking in the literature. This study comparatively examines the achievement level of expressive communication skills as measured…

  3. Sandia_HighTemperatureComponentEvaluation_2015

    Energy Technology Data Exchange (ETDEWEB)

    Cashion, Avery T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    The objective of this project is to perform independent evaluation of high temperature components to determine their suitability for use in high temperature geothermal tools. Development of high temperature components has been increasing rapidly due to demand from the high temperature oil and gas exploration and aerospace industries. Many of these new components are at the late prototype or first production stage of development and could benefit from third party evaluation of functionality and lifetime at elevated temperatures. In addition to independent testing of new components, this project recognizes that there is a paucity of commercial-off-the-shelf COTS components rated for geothermal temperatures. As such, high-temperature circuit designers often must dedicate considerable time and resources to determine if a component exists that they may be able to knead performance out of to meet their requirements. This project aids tool developers by characterization of select COTS component performances beyond published temperature specifications. The process for selecting components includes public announcements of project intent (e.g., FedBizOps), direct discussions with candidate manufacturers,and coordination with other DOE funded programs.

  4. Initial Ada components evaluation

    Science.gov (United States)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  5. Process Evaluation for a Prison-based Substance Abuse Program.

    Science.gov (United States)

    Staton, Michele; Leukefeld, Carl; Logan, T. K.; Purvis, Rick

    2000-01-01

    Presents findings from a process evaluation conducted in a prison-based substance abuse program in Kentucky. Discusses key components in the program, including a detailed program description, modifications in planned treatment strategies, program documentation, and perspectives of staff and clients. Findings suggest that prison-based programs have…

  6. Translator for Optimizing Fluid-Handling Components

    Science.gov (United States)

    Landon, Mark; Perry, Ernest

    2007-01-01

    A software interface has been devised to facilitate optimization of the shapes of valves, elbows, fittings, and other components used to handle fluids under extreme conditions. This software interface translates data files generated by PLOT3D (a NASA grid-based plotting-and- data-display program) and by computational fluid dynamics (CFD) software into a format in which the files can be read by Sculptor, which is a shape-deformation- and-optimization program. Sculptor enables the user to interactively, smoothly, and arbitrarily deform the surfaces and volumes in two- and three-dimensional CFD models. Sculptor also includes design-optimization algorithms that can be used in conjunction with the arbitrary-shape-deformation components to perform automatic shape optimization. In the optimization process, the output of the CFD software is used as feedback while the optimizer strives to satisfy design criteria that could include, for example, improved values of pressure loss, velocity, flow quality, mass flow, etc.

  7. Component failures that lead to reactor scrams

    International Nuclear Information System (INIS)

    Burns, E.T.; Wilson, R.J.; Lim, E.Y.

    1980-04-01

    This report summarizes the operating experience scram data compiled from 35 operating US light water reactors (LWRs) to identify the principal components/systems related to reactor scrams. The data base utilized to identify the scram causes is developed from a EPRI-utility sponsored survey conducted by SAI coupled with recent data from the USNRC Gray Books. The reactor population considered in this evaluation is limited to 23 PWRs and 12 BWRs because of the limited scope of the program. The population includes all the US NSSS vendors. It is judged that this population accurately characterizes the component-related scrams in LWRs over the first 10 years of plant operation

  8. Evaluation of 4 weeks' neonatal antiretroviral prophylaxis as a component of a prevention of mother-to-child transmission program in a resource-rich setting.

    LENUS (Irish Health Repository)

    Ferguson, Wendy

    2011-05-01

    In resource-rich settings, universal adoption of a 4- rather than 6-week neonatal antiretroviral (ARV) prophylaxis regimen could reduce toxicity and results in cost savings, provided prevention of mother-to-child transmission program effectiveness is not compromised.

  9. A Multi-Component Day-Camp Weight-Loss Program Is Effective in Reducing BMI in Children after One Year

    DEFF Research Database (Denmark)

    Larsen, Kristian Traberg; Huang, Tao; Ried-Larsen, Mathias

    2016-01-01

    The objective of the present study was to evaluate the effectiveness of a one-year multi-component immersive day-camp weight-loss intervention for children with overweight and obesity. The study design was a parallel-group randomized controlled trial. One hundred fifteen 11-13-year-old children...

  10. New seismograph includes filters

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-02

    The new Nimbus ES-1210 multichannel signal enhancement seismograph from EG and G geometrics has recently been redesigned to include multimode signal fillers on each amplifier. The ES-1210F is a shallow exploration seismograph for near subsurface exploration such as in depth-to-bedrock, geological hazard location, mineral exploration, and landslide investigations.

  11. CRBRP flow induced vibration program

    Energy Technology Data Exchange (ETDEWEB)

    Novendstern, E H [Westinghouse Advanced Reactor Division, Madison, PA (United States); Grochowski, F A; Yang, T M [General Electric Co., Fast Breeder Reactor Department, Sunnyvale, CA (United States); Ryan, J A; Mulcahy, T M

    1977-12-01

    The program to assure the structural adequacy of Clinch River Breeder Reactor (CRBRP) components during its planned 30 years of operation is described. The program includes (1) an assessment of reactor components relative to their susceptibility to FIV, (2) designing to minimize component excitation due to Fluid induced vibrations (FIV), (3) scale model tests to measure structural response during simulated operating conditions and (4) preoperational tests. An overview of the CRBRP test program is described. Additionally, details of scale model testing of reactor internals and the steam generator is described in more detail. (author)

  12. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.; Fratalocchi, Andrea; Totero Gongora, Juan Sebastian; Coluccio, Maria Laura; Candeloro, Patrizio; Cuda, Gianni

    2015-01-01

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  13. Saskatchewan resources. [including uranium

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    The production of chemicals and minerals for the chemical industry in Saskatchewan are featured, with some discussion of resource taxation. The commodities mentioned include potash, fatty amines, uranium, heavy oil, sodium sulfate, chlorine, sodium hydroxide, sodium chlorate and bentonite. Following the successful outcome of the Cluff Lake inquiry, the uranium industry is booming. Some developments and production figures for Gulf Minerals, Amok, Cenex and Eldorado are mentioned.

  14. The Collection of Data for the Research Component of the Internet-Based, ``Doctor of Astronomy'' Professional Degree Program at James Cook University

    Science.gov (United States)

    Millar, W.; White, G. L.; Filipović, M. D.; Hons, A.

    2008-06-01

    We discuss the means by which students collect, analyze and use original data to fulfill the research component of the Internet-based, professional ``Doctor of Astronomy'' degree, at the James Cook University Centre for Astronomy. We give an example of such data obtained with the 1.9 meter telescope at the South African Astronomical Observatory. We also discuss the use of such data in an introductory level astronomy class at a community college.

  15. Middle School Girls' Science Motivation and Performance: Cognitive Effects of an Out-of-School Time Program with Nutrition and Fitness Components

    Science.gov (United States)

    Gatz, Jennifer

    2017-01-01

    Middle school is a critical period in the cognitive and academic development of young women, and a time when their performance and interest in science may decline. After school programs play a key role in engaging youth in learning by providing opportunities to increase health and wellness, set goals, and strategize problem solving. Skills…

  16. Pacific Reef Assessment and Monitoring Program: Towed-diver Surveys of Benthic Habitat, Key Benthic Species, including Marine Debris Sightings, of the U.S. Pacific Reefs from 2000 to 2012

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The towed-diver method is used to conduct benthic surveys, assessing large-scale disturbances (e.g., bleaching) and quantifying benthic components such as habitat...

  17. National Coral Reef Monitoring Program: Towed-diver Surveys of Benthic Habitat, Key Benthic Species, including Marine Debris Sightings, of American Samoa from 2015-02-15 to 2015-03-23 (NCEI Accession 0157566)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The towed-diver method is used to conduct benthic surveys, assessing large-scale disturbances (e.g., bleaching) and quantifying benthic components such as habitat...

  18. National Coral Reef Monitoring Program: Towed-diver Surveys of Benthic Habitat, Key Benthic Species, including Marine Debris Sightings, of the Hawaiian Archipelago from 2016-07-13 to 2016-09-26 (NCEI Accession 0157565)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The towed-diver method is used to conduct benthic surveys, assessing large-scale disturbances (e.g., bleaching) and quantifying benthic components such as habitat...

  19. National Coral Reef Monitoring Program: Towed-diver Surveys of Benthic Habitat, Key Benthic Species, including Marine Debris Sightings, of the Pacific Remote Island Areas from 2015-01-26 to 2015-04-26 (NCEI Accession 0157564)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The towed-diver method is used to conduct benthic surveys, assessing large-scale disturbances (e.g., bleaching) and quantifying benthic components such as habitat...

  20. Being Included and Excluded

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    2016-01-01

    Following the civil war of 1996–2006, there was a dramatic increase in the labor mobility of young men and the inclusion of young women in formal education, which led to the transformation of the political landscape of rural Nepal. Mobility and schooling represent a level of prestige that rural...... politics. It analyzes how formal education and mobility either challenge or reinforce traditional gendered norms which dictate a lowly position for young married women in the household and their absence from community politics. The article concludes that women are simultaneously excluded and included from...... community politics. On the one hand, their mobility and decision-making powers decrease with the increase in the labor mobility of men and their newly gained education is politically devalued when compared to the informal education that men gain through mobility, but on the other hand, schooling strengthens...

  1. GCS component development cycle

    Science.gov (United States)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  2. A Model for Mental Health Programming in Schools and Communities: Introduction to the Mini-Series.

    Science.gov (United States)

    Nastasi, Bonnie K.

    1998-01-01

    Describes conceptual framework for mini-series on mental health programming. Model includes five components considered to be critical for comprehensive and effective programming. Components include: action research, ecological perspective of program development, collaborative/participatory approach, prevention to treatment via mental health…

  3. Development of Adaptive AE Signal Pattern Recognition Program and Application to Classification of Defects in Metal Contact Regions of Rotating Component

    International Nuclear Information System (INIS)

    Lee, K. Y.; Lee, C. M.; Kim, J. S.

    1996-01-01

    In this study, the artificial defects in rotary compressor are classified using pattern recognition of acoustic emission signal. For this purpose the computer program is developed. The neural network classifier is compared with the statistical classifier such as the linear discriminant function classifier and empirical Bayesian classifier. It is concluded that the former is better. It is possible to acquire the recognition rate of above 99% by neural network classifier

  4. A three-component cognitive behavioural lifestyle program for preconceptional weight-loss in women with polycystic ovary syndrome (PCOS): A protocol for a randomized controlled trial

    OpenAIRE

    Jiskoot, Geranne; Benneheij, Sofie; Beerthuizen, Annemerle; Niet, J.E.; Klerk, Cora; Timman, Reinier; Busschbach, Jan; Laven, Joop

    2017-01-01

    textabstractBackground: Obesity in women with polycystic ovary syndrome (PCOS) negatively affects all clinical features, and a 5 to 10% weight loss has shown promising results on reproductive, metabolic and psychological level. Incorporating a healthy diet, increasing physical activity and changing dysfunctional thought patterns in women with PCOS are key points in losing weight. The biggest challenge in weight management programs is to achieve a reasonable and sustainable weight loss. The ai...

  5. The Feasibility of Embedding Data Collection into the Routine Service Delivery of a Multi-Component Program for High-Risk Young People

    OpenAIRE

    Knight, Alice; Havard, Alys; Shakeshaft, Anthony; Maple, Myfanwy; Snijder, Mieke; Shakeshaft, Bernie

    2017-01-01

    Background: There is little evidence about how to improve outcomes for high-risk young people, of whom Indigenous young people are disproportionately represented, due to few evaluation studies of interventions. One way to increase the evidence is to have researchers and service providers collaborate to embed evaluation into the routine delivery of services, so program delivery and evaluation occur simultaneously. This study aims to demonstrate the feasibility of integrating best-evidence meas...

  6. Electrochemical components

    CERN Document Server

    Pera, Marie-Cécile; Gualous, Hamid; Turpin, Christophe

    2013-01-01

    Marie-Cécile Péra is Full Professor at the University of Franche-Comte in France and Deputy Director of the FEMTO-ST Institute (CNRS). Her research activities include modeling, control and diagnosis of electrical power generation systems (fuel cells - PEMFC and SOFC, supercapacities, batteries) for transportation and stationary applications. Daniel Hissel is Full Professor at the University of Franche-Comte in France and Director of the Fuel Cell Lab Research Federation (CNRS). He also leads a research team devoted to hybrid electrical systems in the FEMTO-ST Institute (CNRS). Hamid Gualo

  7. Local foods can meet micronutrient needs for women in urban Burkina Faso, but only if rarely consumed micronutrient-dense foods are included in daily diets: A linear programming exercise.

    Science.gov (United States)

    Arimond, Mary; Vitta, Bineti S; Martin-Prével, Yves; Moursi, Mourad; Dewey, Kathryn G

    2018-01-01

    Women of reproductive age are at nutritional risk due to their need for nutrient-dense diets. Risk is further elevated in resource-poor environments. In one such environment, we evaluated feasibility of meeting micronutrient needs of women of reproductive age using local foods alone or using local foods and supplements, while minimizing cost. Based on dietary recall data from Ouagadougou, we used linear programming to identify the lowest cost options for meeting 10 micronutrient intake recommendations, while also meeting energy needs and following an acceptable macronutrient intake pattern. We modeled scenarios with maximum intake per food item constrained at the 75th percentile of reported intake and also with more liberal maxima based on recommended portions per day, with and without the addition of supplements. Some scenarios allowed only commonly consumed foods (reported on at least 10% of recall days). We modeled separately for pregnant, lactating, and nonpregnant, nonlactating women. With maxima constrained to the 75th percentile, all micronutrient needs could be met with local foods but only when several nutrient-dense but rarely consumed items were included in daily diets. When only commonly consumed foods were allowed, micronutrient needs could not be met without supplements. When larger amounts of common animal-source foods were allowed, all needs could be met for nonpregnant, nonlactating women but not for pregnant or lactating women, without supplements. We conclude that locally available foods could meet micronutrient needs but that to achieve this, strategies would be needed to increase consistent availability in markets, consistent economic access, and demand. © 2017 John Wiley & Sons Ltd.

  8. The KiVa antibullying program in primary schools in Chile, with and without the digital game component: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Gaete, Jorge; Valenzuela, Daniela; Rojas-Barahona, Cristian; Valenzuela, Eduardo; Araya, Ricardo; Salmivalli, Christina

    2017-02-20

    Bullying is a major problem worldwide and Chile is no exception. Bullying is defined as a systematic aggressive behavior against a victim who cannot defend him or herself. Victims suffer social isolation and psychological maladjustment, while bullies have a higher risk for conduct problems and substance use disorders. These problems appear to last over time. The KiVa antibullying program has been evaluated in Finland and other European countries, showing preventive effects on victimization and self-reported bullying. The aims of this study are (1) to develop a culturally appropriate version of the KiVa material and (2) to test the effectiveness of the KiVa program, with and without the online game, on reducing experiences of victimization and bullying behavior among vulnerable primary schools in Santiago (Chile), using a cluster randomized controlled trial (RCT) design with three arms: (1) full KiVa program group, (2) partial KiVa (without online game) program group and (3) control group. This is a three-arm, single-blind, cluster randomized controlled trial (RCT) with a target enrolment of 1495 4th and 5th graders attending 13 vulnerable schools per arm. Students in the full and partial KiVa groups will receive universal actions: ten 2-h lessons delivered by trained teachers during 1 year; they will be exposed to posters encouraging them to support victims and behave constructively when witnessing bullying; and a person designated by the school authorities will be present in all school breaks and lunchtimes using a visible KiVa vest to remind everybody that they are in a KiVa school. KiVa schools also will have indicated actions, which consist of a set of discussion groups with the victims and with the bullies, with proper follow-up. Only full KiVa schools will also receive an online game which has the aim to raise awareness of the role of the group in bullying, increase empathy and promote strategies to support victimized peers. Self-reported victimization

  9. SBA Network Components & Software Inventory

    Data.gov (United States)

    Small Business Administration — SBA’s Network Components & Software Inventory contains a complete inventory of all devices connected to SBA’s network including workstations, servers, routers,...

  10. National Coral Reef Monitoring Program: Stratified Random Surveys (StRS) of Reef Fish, including Benthic Estimate Data at Jarvis Island from 2016-05-16 to 2016-05-22 (NCEI Accession 0157594)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surveys were conducted in the course of a reef fish survey cruise conducted by the NOAA Coral Reef Ecosystem Program (CREP) at the NOAA Pacific Islands Fisheries...

  11. The market for components

    International Nuclear Information System (INIS)

    Simon, M.; Stoelzl, D.

    1986-01-01

    The offers of the German nuclear components industry are shown at the examples of some masterpieces of engineering and their delivery capacities. Then, the success achieved with exports up to now are referred to. The forecast includes the demand, the side conditions of the technical competition, and the pricing and financing situation. (UA) [de

  12. Integration of Medical Imaging Including Ultrasound into a New Clinical Anatomy Curriculum

    Science.gov (United States)

    Moscova, Michelle; Bryce, Deborah A.; Sindhusake, Doungkamol; Young, Noel

    2015-01-01

    In 2008 a new clinical anatomy curriculum with integrated medical imaging component was introduced into the University of Sydney Medical Program. Medical imaging used for teaching the new curriculum included normal radiography, MRI, CT scans, and ultrasound imaging. These techniques were incorporated into teaching over the first two years of the…

  13. Fabricating nuclear components

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Activities of the Nuclear Engineering Division of Vickers Ltd., particularly fabrication of long slim tubular components for power reactors and the construction of irradiation loops and rigs, are outlined. The processes include hydraulic forming for fabrication of various types of tubes and outer cases of fuel transfer buckets, various specialised welding operations including some applications of the TIG process, and induction brazing of specialised assemblies. (U.K.)

  14. Towards supramolecular engineering of functional nanomaterials: pre-programming multi-component 2D self-assembly at solid-liquid interfaces.

    Science.gov (United States)

    Ciesielski, Artur; Palma, Carlos-Andres; Bonini, Massimo; Samorì, Paolo

    2010-08-24

    Materials with a pre-programmed order at the supramolecular level can be engineered with a sub-nanometer precision making use of reversible non- covalent interactions. The intrinsic ability of supramolecular materials to recognize and exchange their constituents makes them constitutionally dynamic materials. The tailoring of the materials properties relies on the full control over the self-assembly behavior of molecular modules exposing recognition sites and incorporating functional units. In this review we focus on three classes of weak-interactions to form complex 2D architectures starting from properly designed molecular modules: van der Waals, metallo-ligand and hydrogen bonding. Scanning tunneling microscopy studies will provide evidence with a sub-nanometer resolution, on the formation of responsive multicomponent architectures with controlled geometries and properties. Such endeavor enriches the scientist capability of generating more and more complex smart materials featuring controlled functions and unprecedented properties.

  15. Plant systems/components modularization study. Final report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    1977-07-01

    The final results are summarized of a Plant Systems/Components Modularization Study based on Stone and Webster's Pressurized Water Reactor Reference Design. The program has been modified to include evaluation of the most promising areas for modular consideration based on the level of the Sundesert Project engineering design completion and the feasibility of their incorporation into the plant construction effort.

  16. Plant systems/components modularization study. Final report

    International Nuclear Information System (INIS)

    1977-07-01

    The final results are summarized of a Plant Systems/Components Modularization Study based on Stone and Webster's Pressurized Water Reactor Reference Design. The program has been modified to include evaluation of the most promising areas for modular consideration based on the level of the Sundesert Project engineering design completion and the feasibility of their incorporation into the plant construction effort

  17. Automatic capability to store and retrieve component data and to calculate structural integrity of these components

    International Nuclear Information System (INIS)

    McKinnis, C.J.; Toor, P.M.

    1985-01-01

    In structural analysis, assimilation of material, geometry, and service history input parameters is very cumbersome. Quite often with changing service history and revised material properties and geometry, an analysis has to be repeated. To overcome the above mentioned difficulties, a computer program was developed to provide the capability to establish a computerized library of all material, geometry, and service history parameters for components. The program also has the capability to calculate the structural integrity based on the Arrhenius type equations, including the probability calculations. This unique combination of computerized input information storage and automated analysis procedure assures consistency, efficiency, and accuracy when the hardware integrity has to be reassessed

  18. Seismic fragility of nuclear power plant components (Phase 2): A fragility handbook on eighteen components

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.; Hofmayer, C.H.; Kassir, M.K.; Shteyngart, S.

    1991-06-01

    Fragility estimates of seven equipment classes were published in earlier reports. This report presents fragility analysis results from eleven additional equipment categories. The fragility levels are expressed in probabilistic terms. For users' convenience, this concluding report includes a summary of fragility results of all eighteen equipment classes. A set of conversion factors based on judgment is recommended for use of the information for early vintage equipment. The knowledge gained in conducting the Component Fragility Program and similar other programs is expected to provide a new direction for seismic verification and qualification of equipment. 15 refs., 12 tabs

  19. Component wall thinning and a corrosion-erosion monitoring system

    International Nuclear Information System (INIS)

    Bogard, T.; Batt, T.; Roarty, D.

    1989-01-01

    Since a 1986 incident involving failure of a piping elbow due to erosion-corrosion, the electric utility industry has been actively developing technology for implementing long term programs to address corrosion-erosion. This paper describes a typical corrosion-erosion monitoring program, the types of non-destructive examinations (NDE) performed on components, and the extensive NDE data obtained when the program is applied to components in a power plant. To facilitate evaluation of the NDE data on components, an automated NDE data manipulation and data display system is advisable and perhaps necessary due to the large amounts of NDE data typically obtained during a program. Such a comprehensive corrosion-erosion monitoring system (CEMS) needs to be integral with methods for selection of inspection locations and perform NDE data analysis to help in replace, repair, or run decisions. The structure for one CEMS is described which uses IBM PC compatible hardware and a set of software addressing most data evaluation and decision making needs. CEMS features include automated input/output for typical NDE devices, database structuring, graphics outputs including color 2-D or 3-D contour plots of components, trending and predictive evaluations for future inspection planning, EC severity determination, integration of piping isometrics and component properties, and desktop publishing capabilities

  20. A Multi-Component Day-Camp Weight-Loss Program Is Effective in Reducing BMI in Children after One Year: A Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Kristian Traberg Larsen

    Full Text Available The objective of the present study was to evaluate the effectiveness of a one-year multi-component immersive day-camp weight-loss intervention for children with overweight and obesity. The study design was a parallel-group randomized controlled trial. One hundred fifteen 11-13-year-old children with overweight and obesity were randomized into either: A six-week day-camp intervention arm focusing on increased physical activity, and healthy diet followed by a subsequent one-year family-based intervention, or a standard intervention arm consisting of one weekly exercise session for six weeks. Body mass index (BMI was the primary outcome. BMI z-score, clustered cardiovascular risk z-score, and body composition were secondary outcomes. All outcomes were measured at baseline, six week-, and 52 week follow-up. After six weeks, children from the day-camp intervention arm had improved their BMI (-2.2 kg/m2 (95% CI -2.6 to -1.7, P<0.001 and all secondary outcomes when compared to the children from the standard intervention arm. After 52 weeks, the day-camp intervention arm had a lower BMI (-1.2 kg/m2 (95% CI -1.8 to -0.5, P = 0.001, and BMI z-score (-0.20 (95% CI -0.35 to -0.05, P = 0.008, and clustered cardiovascular risk z-score (-0.23 (95% CI -0.37 to -0.08, P = 0.002 compared to the standard intervention arm. No group differences were detected in body composition after 52 weeks. This study shows that the day-camp intervention arm is effective in reducing BMI and improving the metabolic health of children with overweight and obesity. However, the effects seem to be diminishing over time.

  1. VIDENTE: a graphical user interface and decision support system for stochastic modelling of water table fluctuations at a single location; includes documentation of the programs KALMAX, KALTFN, SSD and EMERALD and introductions to stochastic modellin

    NARCIS (Netherlands)

    Bierkens, M.F.P.; Bron, W.A.

    2000-01-01

    The VIDENTE program contains a decision support system (DSS) to choose between different models for stochastic modelling of water-table depths, and a graphical user interface to facilitate operating and running four implemented models: KALMAX, KALTFN,SSDS and EMERALD. In self-contained parts each of

  2. Refurbishment programs

    International Nuclear Information System (INIS)

    Irish, C.S.

    2004-01-01

    As nuclear plants age, equipment becomes obsolete, outdated or just simply unreliable. This puts a lot of emphasis on replacement of the subject equipment. This can be an expensive proposition for safety related equipment due to design changes, requalification charges and the cost of the new equipment, specifically when the original component is obsolete. The presentation will explain how comprehensive refurbishment programs on many different types of equipment can alleviate this situation. The refurbishment program is a systematic refurbishment of equipment to an as new condition by replacing all of the age sensitive components within the equipment. This is carried out on all of the same type of equipment in a scheduled program. For example the plant may to decide to refurbish all of their Lambda LME-24 power supplies, or all of their Bailey modules, or all of their Agastat DSC Series relays. Independent of the item the process is the same. Refurbish each piece of equipment to an as new condition by replacing all of the age sensitive equipment. The equipment is then returned to the client as safety related, existing qualification maintained and with a new service life/warranty. This is not a simple repair. It is a planned refurbishment to an as new condition of certain equipment types throughout the plant and then carried out from equipment piece to equipment piece. The refurbishment program may even include introducing new spares into the plant. This is normally performed by upgrading (dedicating for safety related use and refurbishing to an 'as new' condition) surplus equipment and using these equipment pieces in the rotation of the plant equipment to refurbish the entire population of a selected piece of equipment at the plant. This process can be performed on many equipment types including power supplies, circuit boards, modules, relays, motors, breakers, and many more. The refurbishment program greatly increases the reliability of the equipment without the

  3. Solid state lighting component

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Thomas; Keller, Bernd; Tarsa, Eric; Ibbetson, James; Morgan, Frederick; Dowling, Kevin; Lys, Ihor

    2017-10-17

    An LED component according to the present invention comprising an array of LED chips mounted on a submount with the LED chips capable of emitting light in response to an electrical signal. The array can comprise LED chips emitting at two colors of light wherein the LED component emits light comprising the combination of the two colors of light. A single lens is included over the array of LED chips. The LED chip array can emit light of greater than 800 lumens with a drive current of less than 150 milli-Amps. The LED chip component can also operate at temperatures less than 3000 degrees K. In one embodiment, the LED array is in a substantially circular pattern on the submount.

  4. Components of Camp Experiences for Positive Youth Development

    Directory of Open Access Journals (Sweden)

    Karla A. Henderson

    2007-03-01

    Full Text Available Youth development specialists advocate that well designed, implemented, and staffed youth centered programs result in positive outcomes for young people. Youth organizations have provided opportunities for young people to participate in camping experiences for over a century. The purpose of this paper is to describe what program components were related to camp environments and positive youth development. We describe these program components related to positive youth development based on a large scale national study of ACA (American Camp Association accredited camps that included independent, religiously affiliated, government, and not-for-profit organizations. Based on the responses given by camp directors, contact and leadership from trained staff and the supportive relationships they provided were essential elements of camp. Other aspects leading to positive youth development in camps were program mission and structure along with elements of accountability, assessment of outcomes, and opportunities for skill building.

  5. Materials and Components Technology Division research summary, 1992

    International Nuclear Information System (INIS)

    1992-11-01

    The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database

  6. Component aging illustrated in maintenance histories from IPRDS

    International Nuclear Information System (INIS)

    Kahl, W.K.; Borkowski, R.J.

    1984-01-01

    The centerpiece of the In-Plant Reliability Data (IPRD) program is a nuclear power plant component data base developed from corrective maintenance records. The primary objective of this program is to establish a comprehensive source of information for reliability analyses, including the compilation of maintenance histories for failure statistics. The IPRD program is currently a pilot effort that has 36 reactor-years of data on pumps, valves, diesel generators, batteries, battery chargers and inverters from five nuclear plants. The data are collected under the auspices of the Institute of Electrical and Electronics Engineers (IEEE) to certify anonymity of the participating plants, and is funded by the Nuclear Regulatory Commission

  7. Component Control System for a Vehicle

    Science.gov (United States)

    Fraser-Chanpong, Nathan (Inventor); Spain, Ivan (Inventor); Dawson, Andrew D. (Inventor); Bluethmann, William J. (Inventor); Lee, Chunhao J. (Inventor); Vitale, Robert L. (Inventor); Guo, Raymond (Inventor); Waligora, Thomas M. (Inventor); Akinyode, Akinjide Akinniyi (Inventor); Reed, Ryan M. (Inventor)

    2016-01-01

    A vehicle includes a chassis, a modular component, and a central operating system. The modular component is supported by the chassis. The central operating system includes a component control system, a primary master controller, and a secondary master controller. The component control system is configured for controlling the modular component. The primary and secondary master controllers are in operative communication with the component control system. The primary and secondary master controllers are configured to simultaneously transmit commands to the component control system. The component control system is configured to accept commands from the secondary master controller only when a fault occurs in the primary master controller.

  8. ITER plasma facing components

    International Nuclear Information System (INIS)

    Kuroda, T.; Vieider, G.; Akiba, M.

    1991-01-01

    This document summarizes results of the Conceptual Design Activities (1988-1990) for the International Thermonuclear Experimental Reactor (ITER) project, namely those that pertain to the plasma facing components of the reactor vessel, of which the main components are the first wall and the divertor plates. After an introduction and an executive summary, the principal functions of the plasma-facing components are delineated, i.e., (i) define the low-impurity region within which the plasma is produced, (ii) absorb the electromagnetic radiation and charged-particle flux from the plasma, and (iii) protect the blanket/shield components from the plasma. A list of critical design issues for the divertor plates and the first wall is given, followed by discussions of the divertor plate design (including the issues of material selection, erosion lifetime, design concepts, thermal and mechanical analysis, operating limits and overall lifetime, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, and advanced divertor concepts) and the first wall design (armor material and design, erosion lifetime, overall design concepts, thermal and mechanical analysis, lifetime and operating limits, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, an alternative first wall design, and the limiters used instead of the divertor plates during start-up). Refs, figs and tabs

  9. Secure coupling of hardware components

    NARCIS (Netherlands)

    Hoepman, J.H.; Joosten, H.J.M.; Knobbe, J.W.

    2011-01-01

    A method and a system for securing communication between at least a first and a second hardware components of a mobile device is described. The method includes establishing a first shared secret between the first and the second hardware components during an initialization of the mobile device and,

  10. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  11. Beryllium application in ITER plasma facing components

    International Nuclear Information System (INIS)

    Raffray, A.R.; Federici, G.; Barabash, V.; Cardella, A.; Jakeman, R.; Ioki, K.; Janeschitz, G.; Parker, R.; Tivey, R.; Pacher, H.D.; Wu, C.H.; Bartels, H.W.

    1997-01-01

    Beryllium is a candidate armour material for the in-vessel components of the International Thermonuclear Experimental Reactor (ITER), namely the primary first wall, the limiter, the baffle and the divertor. However, a number of issues arising from the performance requirements of the ITER plasma facing components (PFCs) must be addressed to better assess the attractiveness of Be as armour for these different components. These issues include heat loading limits arising from temperature and stress constraints under steady state conditions, armour lifetime including the effects of sputtering erosion as well as vaporisation and loss of melt during disruption events, tritium retention and permeation, and chemical hazards, in particular with respect to potential Be/steam reaction. Other issues such as fabrication and the possibility of in-situ repair are not performance-dependent but have an important impact on the overall assessment of Be as PFC armour. This paper describes the present view on Be application for ITER PFCs. The key issues are discussed including an assessment of the current level of understanding based on analysis and experimental data; and on-going activities as part of the ITER EDA R and D program are highlighted. (orig.)

  12. Reserve Component Programs, Fiscal Year 1987.

    Science.gov (United States)

    1987-01-01

    would fight. War- time missions are executed with United States and foreign forces, just as would occur &WV ft Ra RDdNemv cowei hr ~u~, FY M87 Exwutdm...Luxembourg Somalia Bermuda Greece Madagascar South Korea Bolivia Greenland Malaysia Spain Brazil Grenada Marshall Islands Sweden Cameroon Guam Mexico...Major Dell M. Dempsey, USMCR Ecuadoran Military attache in Panama 0 Colonel James V. Dugar, ANGUS * Young, Colonel Ralph R. (USAR) 0 Colonel

  13. 49 CFR 228.203 - Program components.

    Science.gov (United States)

    2010-10-01

    ... daylight savings time; (9) For train employees, require completion of a full record at the end of a duty... restricted to the employee or train crew or signal gang whose time is being recorded, with the following... computer terminals is delayed and the employee has exceeded his or her maximum allowed time on duty. (2) No...

  14. APS beamline standard components handbook

    International Nuclear Information System (INIS)

    Kuzay, T.M.

    1992-01-01

    It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

  15. Packaging of structural health monitoring components

    Science.gov (United States)

    Kessler, Seth S.; Spearing, S. Mark; Shi, Yong; Dunn, Christopher T.

    2004-07-01

    Structural Health Monitoring (SHM) technologies have the potential to realize economic benefits in a broad range of commercial and defense markets. Previous research conducted by Metis Design and MIT has demonstrated the ability of Lamb waves methods to provide reliable information regarding the presence, location and type of damage in composite specimens. The present NSF funded program was aimed to study manufacturing, packaging and interface concepts for critical SHM components. The intention is to be able to cheaply manufacture robust actuating/sensing devices, and isolate them from harsh operating environments including natural, mechanical, or electrical extremes. Currently the issues related to SHM system durability have remained undressed. During the course of this research several sets of test devices were fabricated and packaged to protect the piezoelectric component assemblies for robust operation. These assemblies were then tested in hot and wet conditions, as well as in electrically noisy environments. Future work will aim to package the other supporting components such as the battery and wireless chip, as well as integrating all of these components together for operation. SHM technology will enable the reduction or complete elimination of scheduled inspections, and will allow condition-based maintenance for increased reliability and reduced overall life-cycle costs.

  16. Electronic components and technology

    CERN Document Server

    Sangwine, Stephen

    2007-01-01

    Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook.Not only does this textbook introduce the properties, behavior, fabrication, and use

  17. Qualitative Outcomes of Participation in Fishing Components of NOLS Courses

    Directory of Open Access Journals (Sweden)

    Katherine Soule

    2012-03-01

    Full Text Available Numerous fishing education programs in the United States strive to impart hard skill development, as well as life values to youth. This study employs utilizing semi-structured interviewing techniques and means-end analysis to evaluate the effects of youth participation in fishing components of NOLS courses. Interviews were conducted over five years to study benefit retention across time. The fishing component led to thirteen consequences, most frequently to youth feeling a sense of fun and excitement, developing hard skills, and having a new experience/opportunity. In turn, these consequences led youth to a number of values, including transference of information learned or benefits to other areas of their lives, an increased self-respect/esteem/confidence, self-fulfillment, a sense of accomplishment, and self-awareness. These results provide educators and program managers with information to direct programming development for youth attainment and retention of specific participation outcomes.

  18. Commercial Off-the-Shelf (COTS) Components and Enterprise Component Information System (eCIS)

    Energy Technology Data Exchange (ETDEWEB)

    John Minihan; Ed Schmidt; Greg Enserro; Melissa Thompson

    2008-06-30

    The purpose of the project was to develop the processes for using commercial off-the-shelf (COTS) parts for WR production and to put in place a system for implementing the data management tools required to disseminate, store, track procurement, and qualify vendors. Much of the effort was devoted to determining if the use of COTS parts was possible. A basic question: How does the Nuclear Weapons Complex (NWC) begin to use COTS in the weapon Stockpile Life Extension Programs with high reliability, affordability, while managing risk at acceptable levels? In FY00, it was determined that a certain weapon refurbishment program could not be accomplished without the use of COTS components. The elements driving the use of COTS components included decreased cost, greater availability, and shorter delivery time. Key factors that required implementation included identifying the best suppliers and components, defining life cycles and predictions of obsolescence, testing the feasibility of using COTS components with a test contractor to ensure capability, as well as quality and reliability, and implementing the data management tools required to disseminate, store, track procurement, and qualify vendors. The primary effort of this project then was to concentrate on the risks involved in the use of COTS and address the issues of part and vendor selection, procurement and acceptance processes, and qualification of the parts via part and sample testing. The Enterprise Component Information System (eCIS) was used to manage the information generated by the COTS process. eCIS is a common interface for both the design and production of NWC components and systems integrating information between SNL National Laboratory (SNL) and the Kansas City Plant (KCP). The implementation of COTS components utilizes eCIS from part selection through qualification release. All part related data is linked across an unclassified network for access by both SNL and KCP personnel. The system includes not

  19. Tamarisk coalition - native riparian plant materials program

    Science.gov (United States)

    Stacy Kolegas

    2012-01-01

    The Tamarisk Coalition (TC), a nonprofit organization dedicated to riparian restoration in the western United States, has created a Native Plant Materials Program to address the identified need for native riparian plant species for use in revegetation efforts on the Colorado Plateau. The specific components of the Native Plant Materials Program include: 1) provide seed...

  20. Confirmation of the Galactic thick disk component by the Basle RGU- and UBV-photometric space densities. Synopsis of 25 years Basle Halo Program. III - RGU + UBV: SA 82, SA 133, SA 57, SA 54

    Science.gov (United States)

    Fenkart, R.

    1989-10-01

    The stars in four fields of the Basle Halo Program (BHP), henceforth called "UBV-fields", had been (photographically) observed in RGU and in UBV, in order to treat their data in both photometric systems with the same stellar-statistical method for the determination of space density gradients, developed by Becker (1%5) for the RGU-fields of the BHP The purpose was to compare the corresponding results in both systems and to obtain an idea about their mutual performance with respect to this method. All four investigations (references in Tab. I) proved it to work about equally well in both systems, if the outcome is measured in terms of a relatively rough criterion, the so-called "mean misidentification-rate per system" (MMRS). In order to obtain a better founded view about the degree of equivalence of both systems with respect to their application for the three-colour photometrical purposes of the Basle programs, we decided to treat the UBV-fields in this third contribution to the present model-comparison synopsis, in RGU and in UBV, too, by comparing the total space densities observed in both systems with the five standard model gradients and according to the comparison method homogeneously used within the "comparison-phase" of the BHP which was initiated by del Rio and Fenkart (1987). In the appendix, as in paper I, the first contribution to this synopsis (Fenkart, 1989a), we give a full description of the comparison method, and the definition of the five standard models for the space density distribution in the Galaxy which are essentially three versions of the Bahcall-Soneira (1980) two-component model. BS II i(i = 1, 2, 3), as well as a three- and a four-component version of the Gilmore-Wyse (1985) model, without and with a Thick Disk component, GW III and GW IV respectively, together with their parameters in table In addition to that, paper I contains a full account of the almost 25 years old history of the BHP, of the motivation for this synopsis and of its

  1. PSA methodology including new design, operational and safety factors, 'Level of recognition of phenomena with a presumed dominant influence upon operational safety' (failures of conventional as well as non-conventional passive components, dependent failures, influence of operator, fires and external threats, digital control, organizational factors)

    International Nuclear Information System (INIS)

    Jirsa, P.

    2001-10-01

    The document represents a specific type of discussion of existing methodologies for the creation and application of probabilistic safety assessment (PSA) in light of the EUR document summarizing requirements placed by Western European NPP operators on the future design of nuclear power plants. A partial goal of this discussion consists in mapping, from the PSA point of view, those selected design, operational and/or safety factors of future NPPs that may be entirely new or, at least, newly addressed. Therefore, the terms of reference for this stage were formulated as follows: Assess current level of knowledge and procedures in the analysis of factors and phenomena with a dominant influence upon operational safety of new generation reactors, especially in the following areas: (1) Phenomenology of failure types and mechanisms and reliability of conventional passive safety system components; (2) Phenomenology of failure types and mechanisms and reliability of non-conventional passive components of newly designed safety systems; (3) Phenomenology of types and mechanisms of dependent failures; (4) Human factor role in new generation reactors and its effect upon safety; (5) Fire safety and other external threats to new nuclear installations; (6) Reliability of the digital systems of the I and C system and their effect upon safety; and (7) Organizational factors in new nuclear installations. (P.A.)

  2. High-temperature-structural design and research and development for reactor system components

    International Nuclear Information System (INIS)

    Matsumura, Makoto; Hada, Mikio

    1985-01-01

    The design of reactor system components requires high-temperature-structural design guide with the consideration of the creep effect of materials related to research and development on structural design. The high-temperature-structural design guideline for the fast prototype reactor MONJU has been developed under the active leadership by Power Reactor and Nuclear Fuel Development Corporation and Toshiba has actively participated to this work with responsibility on in-vessel components, performing research and development programs. This paper reports the current status of high-temperature-structural-design-oriented research and development programs and development of analytical system including stress-evaluation program. (author)

  3. Including Students with Visual Impairments: Softball

    Science.gov (United States)

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  4. Medicare Program; Hospital Inpatient Prospective Payment Systems for Acute Care Hospitals and the Long-Term Care Hospital Prospective Payment System Policy Changes and Fiscal Year 2016 Rates; Revisions of Quality Reporting Requirements for Specific Providers, Including Changes Related to the Electronic Health Record Incentive Program; Extensions of the Medicare-Dependent, Small Rural Hospital Program and the Low-Volume Payment Adjustment for Hospitals. Final rule; interim final rule with comment period.

    Science.gov (United States)

    2015-08-17

    We are revising the Medicare hospital inpatient prospective payment systems (IPPS) for operating and capital related costs of acute care hospitals to implement changes arising from our continuing experience with these systems for FY 2016. Some of these changes implement certain statutory provisions contained in the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 (collectively known as the Affordable Care Act), the Pathway for Sustainable Growth Reform(SGR) Act of 2013, the Protecting Access to Medicare Act of 2014, the Improving Medicare Post-Acute Care Transformation Act of 2014, the Medicare Access and CHIP Reauthorization Act of 2015, and other legislation. We also are addressing the update of the rate-of-increase limits for certain hospitals excluded from the IPPS that are paid on a reasonable cost basis subject to these limits for FY 2016.As an interim final rule with comment period, we are implementing the statutory extensions of the Medicare dependent,small rural hospital (MDH)Program and changes to the payment adjustment for low-volume hospitals under the IPPS.We also are updating the payment policies and the annual payment rates for the Medicare prospective payment system (PPS) for inpatient hospital services provided by long-term care hospitals (LTCHs) for FY 2016 and implementing certain statutory changes to the LTCH PPS under the Affordable Care Act and the Pathway for Sustainable Growth Rate (SGR) Reform Act of 2013 and the Protecting Access to Medicare Act of 2014.In addition, we are establishing new requirements or revising existing requirements for quality reporting by specific providers (acute care hospitals,PPS-exempt cancer hospitals, and LTCHs) that are participating in Medicare, including related provisions for eligible hospitals and critical access hospitals participating in the Medicare Electronic Health Record (EHR)Incentive Program. We also are updating policies relating to the

  5. Mitigating component performance variation

    Science.gov (United States)

    Gara, Alan G.; Sylvester, Steve S.; Eastep, Jonathan M.; Nagappan, Ramkumar; Cantalupo, Christopher M.

    2018-01-09

    Apparatus and methods may provide for characterizing a plurality of similar components of a distributed computing system based on a maximum safe operation level associated with each component and storing characterization data in a database and allocating non-uniform power to each similar component based at least in part on the characterization data in the database to substantially equalize performance of the components.

  6. Residual life assessment of major LWR components: NPAR approach and results

    International Nuclear Information System (INIS)

    Shah, V.N.; Weidenhamer, G.H.; Vora, J.P.

    1991-01-01

    The nuclear plant aging research (NPAR) program is systematically addressing the technical issues associated with understanding and managing aging of major LWR components. Twenty-one major components have been identified and prioritized according to their relevance to plant safety. Qualitative aging assessment has identified pertinent design features, materials, stressors, environments, aging mechanisms. and failure modes for each of the components. Emerging inspection, surveillance, and monitoring methods to characterize aging damage and mitigation methods to reduce the damage are currently being assessed. The results of all these assessments are used to develop life-assessment procedures for the components and are included in appropriate documents supporting the regulatory requirements for license renewal. (author)

  7. Artificial heart thermal converter component research and development

    International Nuclear Information System (INIS)

    Goldowsky, M.; Lehrfeld, D.

    1977-01-01

    Under U.S. ERDA contract, a radioisotope powered artificial heart system to be used as a replacement for the diseased natural heart is under development by the Westinghouse Advanced Energy Systems Division and Philips Laboratories. A portion of the program activity is in research and development of components for the Stirling cycle thermal converter. Developments in current areas of thermal converter R and D investigation are discussed, including the control system, lubrication system, magnetic shaft coupling, rotary seals, and materials joining

  8. Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies. [various hybrid/electric power train configurations and electrical and mechanical drive-line components

    Science.gov (United States)

    1979-01-01

    The relative attractiveness of various hybrid/electric power train configurations and electrical and mechanical drive-line components was studied. The initial screening was concerned primarily with total vehicle weight and economic factors and identified the hybrid power train combinations which warranted detailed evaluation over various driving cycles. This was done using a second-by-second vehicle simulation program which permitted the calculations of fuel economy, electricity usage, and emissions as a function of distance traveled in urban and highway driving. Power train arrangement possibilities were examined in terms of their effect on vehicle handling, safety, serviceability, and passenger comfort. A dc electric drive system utilizing a separately excited motor with field control and battery switching was selected for the near term hybrid vehicle. Hybrid vehicle simulations showed that for the first 30 mi (the electric range of the vehicle) in urban driving, the fuel economy was 80 mpg using a gasoline engine and 100 mpg using a diesel engine. In urban driving the hybrid would save about 75% of the fuel used by the conventional vehicle and in combined urban/highway driving the fuel saving is about 50%.

  9. Aging Management Strategy and Requirements of Pressurized Water Reactor Internal Components

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jun Seog; Oh, Sung Jin; Won, Se Yol; Jeong, Sun Mi [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    The demonstration that the effects of degradation in the components of PWR internals are adequately managed is essential for maintaining a healthy fleet and ensuring the continued functionality of the reactor internals. It is also very important to determine when and where irradiation susceptibility may occur for the continued operation. This paper introduces the aging management strategies and requirements for PWR internals components and discusses effects of irradiation aging results from the functionality assessments based on the categorization of internal components. This paper introduces aging management strategies and requirements for PWR internals components. The aging management requirements for PWR internals are specified in four final component groups, which are Primary, Expansion, Existing Program and No Additional Measures. Among these groups, Primary groups include any restriction on general applicability, degradation mechanism, forward link to any Expansion components, examination method, initial examination and frequency, and examination coverage and accessibility. Expansion groups are backward link to the Primary component.

  10. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  11. Nuclear reactor shield including magnesium oxide

    International Nuclear Information System (INIS)

    Rouse, C.A.; Simnad, M.T.

    1981-01-01

    An improvement is described for nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux. The reactor shielding includes means providing structural support, neutron moderator material, neutron absorber material and other components, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron

  12. An Investigation of Teaching and Learning Programs in Pharmacy Education.

    Science.gov (United States)

    Strang, Aimee F; Baia, Patricia

    2016-05-25

    Objective. To investigate published, peer-reviewed literature on pharmacy teaching and learning development programs and to synthesize existing data, examine reported efficacy and identify future areas for research. Methods. Medline and ERIC databases were searched for studies on teaching development programs published between 2001 and 2015. Results. Nineteen publications were included, representing 21 programs. Twenty programs were resident teaching programs, one program described faculty development. The majority of programs spanned one year and delivered instruction on teaching methodologies and assessment measures. All except one program included experiential components. Thirteen publications presented outcomes data; most measured satisfaction and self-perceived improvement. Conclusion. Published literature on teacher development in pharmacy is focused more on training residents than on developing faculty members. Although programs are considered important and highly valued by program directors and participants, little data substantiates that these programs improve teaching. Future research could focus on measurement of program outcomes and documentation of teaching development for existing faculty members.

  13. De-chlorination and solidification of radioactive LiCl waste salt by using SiO{sub 2}-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5} (SAP) inorganic composite including B{sub 2}O{sub 3} component

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ki Rak; Park, Hwan-Seo; Cho, In-Hak; Choi, Jung-Hoon; Eun, Hee-Chul; Lee, Tae-Kyo; Han, Seung Youb; Ahn, Do-Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-09-15

    SAP (SiO{sub 2}-Al{sub 2}O{sub 3}-P{sub 2}O{sub 5}) composite has been recently studied in KAERI to deal with the immobilization of radioactive salt waste, one of the most problematic wastes in the pyro-chemical process. Highly unstable salt waste was successfully converted into stable compounds by the dechlorination process with SAPs, and then a durable waste form with a high waste loading was produced when adding glassy materials to dechlorination product. In the present study, U-SAP composite which is SAP bearing glassy component (Boron) was synthesized to remove the adding and mixing steps of glassy materials for a monolithic wasteform. With U-SAPs prepared by a sol-gel process, a series of wasteforms were fabricated to identify a proper reaction condition. Physical and chemical properties of dechlorination products and U-SAP wasteforms were characterized by XRD, DSC, SEM, TGA and PCT-A. A U-SAP wasteform showed suitable properties as a radioactive wasteform such as dense surface morphology, high waste loading, and high durability at the optimized U-SAP/salt ratio 2.

  14. MULTIMETAL - Structural performance of multimetal component

    International Nuclear Information System (INIS)

    Keim, Elisabeth; Blasset, Sebastien; Tiete, Ralf; Gilles, Philippe; Karjalainen-Roikonen, Paeivi

    2012-01-01

    The main objectives of the project are: - Develop a standard for fracture resistance testing in multi-metal specimens; - Develop harmonized procedures for dissimilar metal welds brittle and ductile integrity assessment. The underlying aim of the project is to provide recommendations for a good practice approach for the integrity assessment (including testing) of dissimilar metal welds as part of overall integrity analyses and leak-before-break (LBB) procedures. In a nuclear power plant (NPP) a single metallic component may be fabricated from different materials. For example, reactor pressure vessel (RPV) components are mainly made of ferritic steel, whereas some of the connecting pipelines are fabricated from austenitic stainless steel. As a consequence, components made of different kind of steels need to be connected. Their connecting welds are called dissimilar metal welds (DMW). Despite extensive research in the past within the EURATOM Framework, e.g. the projects BIMET and ADIMEW, further work is needed to quantify the structural performance of DMWs. The first step of the project is to gather relevant information from field experience. Typical locations of DMWs in Western as well as Eastern type light water reactors (LWRs) will be identified together with their physical and metallurgical characteristics, as well as applicable structural integrity assessment methods. The collection of relevant field information including findings position (flaw) will be followed by computational structural integrity assessment analyses of DMWs for dedicated test configurations and real cases. These analyses will involve simple engineering methods and numerical analyses. The latter also involves the use of innovative micro-mechanical modelling approaches for ductile failure processes in order to augment existing numerical methods for structural integrity assessment of DMWs. Ageing related phenomena and realistic stress distributions in the weld area will be considered. The

  15. Emotional stability components of human performance problems

    International Nuclear Information System (INIS)

    Wexler, R.H.

    1987-01-01

    Over half of all significant events that occur in nuclear plants involve human performance problems. There is increasing worldwide recognition that human performance problems have a significant impact on the safety, cost, and efficiency of nuclear plant operations. Emotional stability components have an important direct and indirect impact on human performance problems. This paper examines emotional stability components that are currently incorporated into human performance evaluation systems (HPES) in nuclear plants. It describes HPES programs being developed around the world, the emotional stability components that are currently referred to in these programs, and suggestions for improving HPES programs through a greater understanding of emotion stability components. A review of emotional stability components that may hinder or promote a plant environment that encourages the voluntary reporting and correction of human error is also presented

  16. Modifying Anti-Bullying Programs to Include Students with Disabilities

    Science.gov (United States)

    Raskauskas, Juliana; Modell, Scott

    2011-01-01

    "Bullying" is defined as any aggressive behavior with the intent to harm that involves a real or perceived power imbalance. Bullying is identified as one of the most predominant problems faced by children in the United States education system, as well as one of the most significant health risks to children. Exactly how prevalent this issue is…

  17. Center Innovation Fund: JSC CIF (also includes JSC IRAD) Program

    Data.gov (United States)

    National Aeronautics and Space Administration — JSC provides and applies its preeminent capabilities in science and technology to develop, operate, and integrate human exploration missions.  The Center...

  18. MOS modeling hierarchy including radiation effects

    International Nuclear Information System (INIS)

    Alexander, D.R.; Turfler, R.M.

    1975-01-01

    A hierarchy of modeling procedures has been developed for MOS transistors, circuit blocks, and integrated circuits which include the effects of total dose radiation and photocurrent response. The models were developed for use with the SCEPTRE circuit analysis program, but the techniques are suitable for other modern computer aided analysis programs. The modeling hierarchy permits the designer or analyst to select the level of modeling complexity consistent with circuit size, parametric information, and accuracy requirements. Improvements have been made in the implementation of important second order effects in the transistor MOS model, in the definition of MOS building block models, and in the development of composite terminal models for MOS integrated circuits

  19. Method of using infrared radiation for assembling a first component with a second component

    Science.gov (United States)

    Sikka, Vinod K.; Whitson, Barry G.; Blue, Craig A.

    1999-01-01

    A method of assembling a first component for assembly with a second component involves a heating device which includes an enclosure having a cavity for inserting a first component. An array of infrared energy generators is disposed within the enclosure. At least a portion of the first component is inserted into the cavity, exposed to infrared energy and thereby heated to a temperature wherein the portion of the first component is sufficiently softened and/or expanded for assembly with a second component.

  20. Behavior Protocols for Software Components

    Czech Academy of Sciences Publication Activity Database

    Plášil, František; Višňovský, Stanislav

    2002-01-01

    Roč. 28, č. 11 (2002), s. 1056-1076 ISSN 0098-5589 R&D Projects: GA AV ČR IAA2030902; GA ČR GA201/99/0244 Grant - others:Eureka(XE) Pepita project no.2033 Institutional research plan: AV0Z1030915 Keywords : behavior protocols * component-based programming * software architecture Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.170, year: 2002

  1. NET-2 Network Analysis Program

    International Nuclear Information System (INIS)

    Malmberg, A.F.

    1974-01-01

    The NET-2 Network Analysis Program is a general purpose digital computer program which solves the nonlinear time domain response and the linearized small signal frequency domain response of an arbitrary network of interconnected components. NET-2 is capable of handling a variety of components and has been applied to problems in several engineering fields, including electronic circuit design and analysis, missile flight simulation, control systems, heat flow, fluid flow, mechanical systems, structural dynamics, digital logic, communications network design, solid state device physics, fluidic systems, and nuclear vulnerability due to blast, thermal, gamma radiation, neutron damage, and EMP effects. Network components may be selected from a repertoire of built-in models or they may be constructed by the user through appropriate combinations of mathematical, empirical, and topological functions. Higher-level components may be defined by subnetworks composed of any combination of user-defined components and built-in models. The program provides a modeling capability to represent and intermix system components on many levels, e.g., from hole and electron spatial charge distributions in solid state devices through discrete and integrated electronic components to functional system blocks. NET-2 is capable of simultaneous computation in both the time and frequency domain, and has statistical and optimization capability. Network topology may be controlled as a function of the network solution. (U.S.)

  2. Automated cleaning of electronic components

    International Nuclear Information System (INIS)

    Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

    1994-01-01

    Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations

  3. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  4. Neutral beam program

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    The structure of the beam injection program for the Doublet-3 device is discussed. The design considerations for the beam line and design parameters for the Doublet-3 ion souce are given. Major components of the neutral beam injector system are discussed in detail. These include the neutralizer, magnetic shielding, reflecting magnets, vacuum system, calorimeter and beam dumps, and drift duct. The planned location of the two-injector system for Doublet-3 is illustrated and site preparation is considered. The status of beamline units 1 and 2 and the future program schedule are discussed

  5. Reliability parameters of distribution networks components

    Energy Technology Data Exchange (ETDEWEB)

    Gono, R.; Kratky, M.; Rusek, S.; Kral, V. [Technical Univ. of Ostrava (Czech Republic)

    2009-03-11

    This paper presented a framework for the retrieval of parameters from various heterogenous power system databases. The framework was designed to transform the heterogenous outage data in a common relational scheme. The framework was used to retrieve outage data parameters from the Czech and Slovak republics in order to demonstrate the scalability of the framework. A reliability computation of the system was computed in 2 phases representing the retrieval of component reliability parameters and the reliability computation. Reliability rates were determined using component reliability and global reliability indices. Input data for the reliability was retrieved from data on equipment operating under similar conditions, while the probability of failure-free operations was evaluated by determining component status. Anomalies in distribution outage data were described as scheme, attribute, and term differences. Input types consisted of input relations; transformation programs; codebooks; and translation tables. The system was used to successfully retrieve data from 7 distributors in the Czech Republic and Slovak Republic between 2000-2007. The database included 301,555 records. Data were queried using SQL language. 29 refs., 2 tabs., 2 figs.

  6. Development of radiation hard components for remote maintenance

    International Nuclear Information System (INIS)

    Oka, Kiyoshi; Obara, Kenjiro; Kakudate, Satoshi; Tominaga, Ryuichiro; Akada, Tamio; Morita, Hirosuke.

    1997-01-01

    In International Thermonuclear Experimental Reactor (ITER), in-vessel remote-handling is inevitably required to assemble and maintain activated in-vessel components due to D-T operation. The components of the in-vessel remote-handling system must have sufficient radiation hardness to allow for operation under an intense gamma-ray radiation of over 30 kGy/h for periods up to more than 1,000 hours. To this end, extensive irradiation tests and quality improvements including the optimization of material composition have been conducted through the ITER R and D program in order to develop radiation hard components which satisfy radiation doses from 10 MGy to 100 MGy at the dose rate of 10 kGy/h. This paper outlines the latest status of the radiation hard component development that has been conducted as the Japan Home Team's contribution to ITER. The remote-handling components tested are categorized into either robotics, viewing systems or common components. The irradiation tests include commercial base products for screening both modified and newly developed products to improve their radiation hardness. (author)

  7. Food Components and Supplements

    DEFF Research Database (Denmark)

    Parlesak, Alexandr

    2012-01-01

    acting as carcinogens) to health-protective effects (e.g., flavonoids ameliorating detrimental effects of mitochondrial oxidative stress). In particular, secondary plant metabolites along with vitamins, specific types of macronutrients and live bacteria (probiotics) as well as substances promoting.......g., secondary plant metabolites such as flavonoids), or as contaminants that enter the food chain at different stages or during the food production process. For these components, a wide spectrum of biological effects was observed that ranges from health-threatening impacts (e.g., polycyclic aromatic amines....... The supplements and contaminants can compete directly with drug oxidation, induce or suppress the expression of xenobiotic-metabolizing enzymes, change the bioavailability of drugs, and, in the case of live bacteria, bring in their own xenobiotic metabolism, including cytochrome P450 (CYP) activity. In numerous...

  8. Component failure data handbook

    International Nuclear Information System (INIS)

    Gentillon, C.D.

    1991-04-01

    This report presents generic component failure rates that are used in reliability and risk studies of commercial nuclear power plants. The rates are computed using plant-specific data from published probabilistic risk assessments supplemented by selected other sources. Each data source is described. For rates with four or more separate estimates among the sources, plots show the data that are combined. The method for combining data from different sources is presented. The resulting aggregated rates are listed with upper bounds that reflect the variability observed in each rate across the nuclear power plant industry. Thus, the rates are generic. Both per hour and per demand rates are included. They may be used for screening in risk assessments or for forming distributions to be updated with plant-specific data

  9. Sodium removal, storage, and requalification of components

    International Nuclear Information System (INIS)

    Gallegos, A.; Shimazaki, T.; Oliva, R.M.

    1974-01-01

    The objectives of this program are to devise, develop, test, and evaluate techniques for sodium removal and storage of test specimens and components, and to expand and refine, by test and analysis, the sodium removal and storage techniques and procedures for use in processing typical LMFBR components

  10. Model reduction by weighted Component Cost Analysis

    Science.gov (United States)

    Kim, Jae H.; Skelton, Robert E.

    1990-01-01

    Component Cost Analysis considers any given system driven by a white noise process as an interconnection of different components, and assigns a metric called 'component cost' to each component. These component costs measure the contribution of each component to a predefined quadratic cost function. A reduced-order model of the given system may be obtained by deleting those components that have the smallest component costs. The theory of Component Cost Analysis is extended to include finite-bandwidth colored noises. The results also apply when actuators have dynamics of their own. Closed-form analytical expressions of component costs are also derived for a mechanical system described by its modal data. This is very useful to compute the modal costs of very high order systems. A numerical example for MINIMAST system is presented.

  11. Java Programming Language

    Science.gov (United States)

    Shaykhian, Gholam Ali

    2007-01-01

    The Java seminar covers the fundamentals of Java programming language. No prior programming experience is required for participation in the seminar. The first part of the seminar covers introductory concepts in Java programming including data types (integer, character, ..), operators, functions and constants, casts, input, output, control flow, scope, conditional statements, and arrays. Furthermore, introduction to Object-Oriented programming in Java, relationships between classes, using packages, constructors, private data and methods, final instance fields, static fields and methods, and overloading are explained. The second part of the seminar covers extending classes, inheritance hierarchies, polymorphism, dynamic binding, abstract classes, protected access. The seminar conclude by introducing interfaces, properties of interfaces, interfaces and abstract classes, interfaces and cailbacks, basics of event handling, user interface components with swing, applet basics, converting applications to applets, the applet HTML tags and attributes, exceptions and debugging.

  12. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  13. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  14. SAMPO 90 high resolution interactive gamma-spectrum analysis including automation with macros

    International Nuclear Information System (INIS)

    Aarnio, P.A.; Nikkinen, M.T.; Routti, J.T.

    1992-01-01

    SAMPO 90 is high performance gamma-spectrum analysis program for personal computers. It uses color graphics to display calibrations, spectra, fitting results as multiplet components, and analysis results. All the analysis phases can be done either under full interactive user control or macros and programmable function keys can be used for completely automated measurement and analysis sequences including the control of MACs and sample changers. Accurate peak area determination of even the most complex multiplets, of up to 32 components, is accomplished using linear and mixed mode fitting. Nuclide identification is done using associated lines techniques allowing interference correction for fully overlapping peaks. Peaked Background Subtraction can be performed and Minimum Detectable Activities calculated. The analysis reports and program parameters are fully customizable. (author) 13 refs.; 1 fig

  15. Reactor component automatic grapple

    International Nuclear Information System (INIS)

    Greenaway, P.R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)

  16. Repurposing learning object components

    NARCIS (Netherlands)

    Verbert, K.; Jovanovic, J.; Gasevic, D.; Duval, E.; Meersman, R.

    2005-01-01

    This paper presents an ontology-based framework for repurposing learning object components. Unlike the usual practice where learning object components are assembled manually, the proposed framework enables on-the-fly access and repurposing of learning object components. The framework supports two

  17. Component Development to Accelerate Commercial Implementation of Ultra-Low Emissions Catalytic Combustion

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, Jon; Berry, Brian; Lundberg, Kare; Anson, Orris

    2003-03-31

    This final report describes a 2000-2003 program for the development of components and processes to enhance the commercialization of ultra-low emissions catalytic combustion in industrial gas turbines. The range of project tasks includes: development of more durable, lower-cost catalysts and catalytic combustor components; development and design of a catalytic pre-burner and a catalytic pilot burner for gas turbines, and on-site fuel conversion processing for utilization of liquid fuel.

  18. Optical components for the Nova laser

    International Nuclear Information System (INIS)

    Wallerstein, E.P.; Baker, P.C.; Brown, N.J.

    1982-01-01

    In addition to its other characteristics, the Nova Laser Fusion facility may well be the largest precision optical project ever undertaken. Moreover, during the course of construction, concurrent research and development has been successfully conducted, and has resulted in significant advances in various technical areas, including manufacturing efficiency. Although assembly of the first two beams of Nova is just commencing, the optical production, including construction of the special facilities required for many of the components, has been underway for over three years, and many phases of the optical manufacturing program for the first 10 beams will be completed within the next two years. On the other hand, new requirements for second and third harmonic generation have created the need to initiate new research and development. This work has been accomplished through the enormous cooperation DOE/LLNL has received from commercial industry on this project. In many cases, industry, where much of the optical component research and development and virtually all of the manufacturing is being done, has made substantial investment of its own funds in facilities, equipment, and research and development, in addition to those supplied by DOE/LLNL

  19. Linear programming using Matlab

    CERN Document Server

    Ploskas, Nikolaos

    2017-01-01

    This book offers a theoretical and computational presentation of a variety of linear programming algorithms and methods with an emphasis on the revised simplex method and its components. A theoretical background and mathematical formulation is included for each algorithm as well as comprehensive numerical examples and corresponding MATLAB® code. The MATLAB® implementations presented in this book  are sophisticated and allow users to find solutions to large-scale benchmark linear programs. Each algorithm is followed by a computational study on benchmark problems that analyze the computational behavior of the presented algorithms. As a solid companion to existing algorithmic-specific literature, this book will be useful to researchers, scientists, mathematical programmers, and students with a basic knowledge of linear algebra and calculus.  The clear presentation enables the reader to understand and utilize all components of simplex-type methods, such as presolve techniques, scaling techniques, pivoting ru...

  20. ITER plasma facing components, design and development

    International Nuclear Information System (INIS)

    Vieider, G.; Cardella, A.; Akiba, M.; Matera, R.; Watson, R.

    1991-01-01

    The paper summarizes the collaborative effort of the ITER Conceptual Design Activity (CDA) on Plasma Facing Components (PFC) which focused on the following main tasks: (a) The definition of basic design concepts for the First Wall (FW) and Divertor Plates (DP), (b) the analysis of the performance and likely lifetime of these PFC designs including the identification of major critical issues, (c) the start of R and D work giving already first results, and the definition of the required further R and D program to support the contemplated ITER Engineering Design Activity (EDA). From the ITER CDA effort on PFC it is mainly concluded that: (a) The expected PFC operating conditions lead to design solutions at the limit of present technology in particular for the divertor, which may constrain the overall machine performance, (b) the development of convincing PFC designs requires an intensified R and D effort both on PFC technology and plasma physics. (orig.)

  1. Decontamination Systems Information and Research Program

    International Nuclear Information System (INIS)

    Berg, M.; Sack, W.A.; Gabr, M.

    1994-01-01

    The Decontamination Systems Information and Research Program at West Virginia University consists of research and development associated with hazardous waste remediation problems at the Department of Energy complex and elsewhere. This program seeks to facilitate expedited development and implementation of solutions to the nation's hazardous waste clean-up efforts. By a unique combination of university research and private technology development efforts, new paths toward implementing technology and speeding clean-ups are achievable. Mechanisms include aggressive industrial tie-ins to academic development programs, expedited support of small business technology development efforts, enhanced linkages to existing DOE programs, and facilitated access to hazardous waste sites. The program topically falls into an information component, which includes knowledge acquisition, technology evaluation and outreach activities and an R and D component, which develops and implements new and improved technologies. Projects began in February 1993 due to initiation of a Cooperative Agreement between West Virginia University and the Department of Energy

  2. Methods for integrating a functional component into a microfluidic device

    Science.gov (United States)

    Simmons, Blake; Domeier, Linda; Woo, Noble; Shepodd, Timothy; Renzi, Ronald F.

    2014-08-19

    Injection molding is used to form microfluidic devices with integrated functional components. One or more functional components are placed in a mold cavity, which is then closed. Molten thermoplastic resin is injected into the mold and then cooled, thereby forming a solid substrate including the functional component(s). The solid substrate including the functional component(s) is then bonded to a second substrate, which may include microchannels or other features.

  3. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  4. Oil and Gas R&D Programs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This publication describes the major components of the research and development programs of the Department of Energy`s Office of Natural Gas and Petroleum Technology. These programs are commonly referred to collectively as the `Oil and Gas Program.` This document provides customers with a single source of information describing the details of the individual technology program components. This document reflects the results of a planning cycle that began in early 1996 with the development of a scenario analysis for the programs, followed by the development of the coordinated strategic plan. The technology program plans, which are the most recent products of the planning cycle, expand on the program descriptions presented in the coordinated strategic plan, and represent an initial effort to coordinate the Oil and Gas Program exploration and production programs and budgets. Each technology program plan includes a `roadmap` that summarizes the progress of the program to the present and indicates its future direction. The roadmaps describe the program drivers, vision, mission, strategies, and measures of success. Both the individual technology program plans and the strategic plan are dynamic and are intended to be updated regularly.

  5. GOATS - Orbitology Component

    Science.gov (United States)

    Haber, Benjamin M.; Green, Joseph J.

    2010-01-01

    The GOATS Orbitology Component software was developed to specifically address the concerns presented by orbit analysis tools that are often written as stand-alone applications. These applications do not easily interface with standard JPL first-principles analysis tools, and have a steep learning curve due to their complicated nature. This toolset is written as a series of MATLAB functions, allowing seamless integration into existing JPL optical systems engineering modeling and analysis modules. The functions are completely open, and allow for advanced users to delve into and modify the underlying physics being modeled. Additionally, this software module fills an analysis gap, allowing for quick, high-level mission analysis trades without the need for detailed and complicated orbit analysis using commercial stand-alone tools. This software consists of a series of MATLAB functions to provide for geometric orbit-related analysis. This includes propagation of orbits to varying levels of generalization. In the simplest case, geosynchronous orbits can be modeled by specifying a subset of three orbit elements. The next case is a circular orbit, which can be specified by a subset of four orbit elements. The most general case is an arbitrary elliptical orbit specified by all six orbit elements. These orbits are all solved geometrically, under the basic problem of an object in circular (or elliptical) orbit around a rotating spheroid. The orbit functions output time series ground tracks, which serve as the basis for more detailed orbit analysis. This software module also includes functions to track the positions of the Sun, Moon, and arbitrary celestial bodies specified by right ascension and declination. Also included are functions to calculate line-of-sight geometries to ground-based targets, angular rotations and decompositions, and other line-of-site calculations. The toolset allows for the rapid execution of orbit trade studies at the level of detail required for the

  6. Modelling Livestock Component in FSSIM

    NARCIS (Netherlands)

    Thorne, P.J.; Hengsdijk, H.; Janssen, S.J.C.; Louhichi, K.; Keulen, van H.; Thornton, P.K.

    2009-01-01

    This document summarises the development of a ruminant livestock component for the Farm System Simulator (FSSIM). This includes treatments of energy and protein transactions in ruminant livestock that have been used as a basis for the biophysical simulations that will generate the input production

  7. Key components of financial-analysis education for clinical nurses.

    Science.gov (United States)

    Lim, Ji Young; Noh, Wonjung

    2015-09-01

    In this study, we identified key components of financial-analysis education for clinical nurses. We used a literature review, focus group discussions, and a content validity index survey to develop key components of financial-analysis education. First, a wide range of references were reviewed, and 55 financial-analysis education components were gathered. Second, two focus group discussions were performed; the participants were 11 nurses who had worked for more than 3 years in a hospital, and nine components were agreed upon. Third, 12 professionals, including professors, nurse executive, nurse managers, and an accountant, participated in the content validity index. Finally, six key components of financial-analysis education were selected. These key components were as follows: understanding the need for financial analysis, introduction to financial analysis, reading and implementing balance sheets, reading and implementing income statements, understanding the concepts of financial ratios, and interpretation and practice of financial ratio analysis. The results of this study will be used to develop an education program to increase financial-management competency among clinical nurses. © 2015 Wiley Publishing Asia Pty Ltd.

  8. Development of radiation hardness components for ITER remote maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yagi, Toshiaki; Morita, Yousuke

    1998-04-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  9. Development of radiation hardness components for ITER remote maintenance

    International Nuclear Information System (INIS)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira; Yagi, Toshiaki; Morita, Yousuke

    1998-01-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  10. Valuing Professional Development Components for Emerging Undergraduate Researchers

    Science.gov (United States)

    Cheung, I.

    2015-12-01

    In 2004 the Hatfield Marine Science Center (HMSC) at Oregon State University (OSU) established a Research Experience for Undergraduates (REU) program to engage undergraduate students in hands-on research training in the marine sciences. The program offers students the opportunity to conduct research focused on biological and ecological topics, chemical and physical oceanography, marine geology, and atmospheric science. In partnership with state and federal government agencies, this ten-week summer program has grown to include 20+ students annually. Participants obtain a background in the academic discipline, professional development training, and research experience to make informed decisions about careers and advanced degrees in marine and earth system sciences. Professional development components of the program are designed to support students in their research experience, explore career goals and develop skills necessary to becoming a successful young marine scientist. These components generally include seminars, discussions, workshops, lab tours, and standards of conduct. These componentscontribute to achieving the following professional development objectives for the overall success of new emerging undergraduate researchers: Forming a fellowship of undergraduate students pursuing marine research Stimulating student interest and understanding of marine research science Learning about research opportunities at Oregon State University "Cross-Training" - broadening the hands-on research experience Exploring and learning about marine science careers and pathways Developing science communication and presentation skills Cultivating a sense of belonging in the sciences Exposure to federal and state agencies in marine and estuarine science Academic and career planning Retention of talented students in the marine science Standards of conduct in science Details of this program's components, objectives and best practices will be discussed.

  11. Achievement report for fiscal 1993. International clean energy system technology to utilize hydrogen - WE-NET (Sub-task 8. Development of hydrogen burning turbines - Development of main components including turbine blades and rotors); 1993 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) (Sub tusk 8: Suiso nensho tabin no kaihatsu - tabin yoku rota tou shuyou kosei kiki no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Among the research and development items in relation with the 'development of hydrogen burning turbines' based on the WE-NET project, surveys have been performed on developing the main components including turbine blades and rotors. The current fiscal year has surveyed the latest trends in the existing gas turbine and rotor cooling technologies, and the technological problems were extracted from the viewpoint of application to the hydrogen fueled turbines. Since the hydrogen fueled turbines have the entrance temperature higher than that of power generation gas turbines, development of the blade cooling technology is important. Main cooling methods available are the film cooling and transpiration cooling, whose technological development is necessary in the advanced forms. Cooling method for the inner side of blades includes the impingement cooling and the pin fin cooling, whereas the V-letter shaped turbulence accelerating rib and the serpentine flow path structure are considered promising. Increasing the anti-heat temperature of blades may be realized by utilizing ceramics. As a technology close to putting it into practical use, application of heat shield coating is promising. (NEDO)

  12. Theory including future not excluded

    DEFF Research Database (Denmark)

    Nagao, K.; Nielsen, H.B.

    2013-01-01

    We study a complex action theory (CAT) whose path runs over not only past but also future. We show that, if we regard a matrix element defined in terms of the future state at time T and the past state at time TA as an expectation value in the CAT, then we are allowed to have the Heisenberg equation......, Ehrenfest's theorem, and the conserved probability current density. In addition,we showthat the expectation value at the present time t of a future-included theory for large T - t and large t - T corresponds to that of a future-not-included theory with a proper inner product for large t - T. Hence, the CAT...

  13. Strategies for replacement of obsolete equipment - including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2000-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of: commercially available equivalent component; modification of a commercial available component; reverse engineering of the original component; and finally, design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: Missing, misleading or no information on the original component; Acquiring information from the original equipment manufacturer and the plant; Using a sample component for the replacement evaluation and or reverse engineering; and Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  14. Strategies for replacement of obsolete equipment, including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2003-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of, (1) commercially available equivalent component, (2) modification of a commercial available component, (3) reverse engineering of the original component and finally (4) design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: 1) Missing, misleading or no information on the original component. 2) Acquiring information from the original equipment manufacturer and the plant. 3) Using a sample component for the replacement evaluation and or reverse engineering. 4) Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  15. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  16. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  17. Control component retainer

    International Nuclear Information System (INIS)

    Walton, L.A.; King, R.A.

    1983-01-01

    An apparatus is described for retaining an undriven control component assembly disposed in a fuel assembly in a nuclear reactor of the type having a core grid plate. The first part of the mechanism involves a housing for the control component and the second part is a brace with a number of arms that reach under the grid plate. The brace and the housing are coupled together to firmly hold the control components in place even under strong flows of th coolant

  18. Helping boys at-risk of criminal activity: qualitative results of a multi-component intervention

    Directory of Open Access Journals (Sweden)

    Brennan Erin

    2011-05-01

    Full Text Available Abstract Background This qualitative study examines parent and child experiences of participation in a multi-component community-based program aimed at reducing offending behaviour, and increasing social competence in boys 6 to 11 years old in Hamilton, Ontario, Canada. The program builds on the concept of crime prevention through social development, and includes structured groups for the identified boy, parents, and siblings. Methods A sample of 35 families participating in the multi-component program took part in the qualitative study. Individual interviews with the boys, parents and siblings asked about changes in themselves, relationships with family and peers, and school after the group. Interviews were taped, transcribed and content analysis was used to code and interpret the data. Results Parents reported improvement in parenting skills and attainment of more effective communication skills, particularly with their children. Parents also found the relationships they formed with other parents in the program and the advice that they gained to be beneficial. Boys who participated in the program also benefited, with both parents and boys reporting improvements in boys' anger management skills, social skills, impulse control, and ability to recognize potentially volatile situations. Both parents and boys described overall improvement in family relationships and school-related success. Conclusions The qualitative data revealed that parents and boys participating in the multi-component program perceived improvements in a number of specific areas, including social competence of the boys. This has not been demonstrated as clearly in other evaluations of the program.

  19. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L K; Allan, G L; Cresswell, R G; Ophel, T R [Australian National Univ., Canberra, ACT (Australia); King, S J; Day, J P [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1994-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  20. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L.K.; Allan, G.L.; Cresswell, R.G.; Ophel, T.R. [Australian National Univ., Canberra, ACT (Australia); King, S.J.; Day, J.P. [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1993-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  1. AGING MANAGMENT OF REACTOR COOLANT SYSTEM MECHANICAL COMPONENTS FOR LICENSE RENEWAL

    International Nuclear Information System (INIS)

    SUBUDHI, M.; MORANTE, R.; LEE, A.D.

    2002-01-01

    The reactor coolant system (RCS) mechanical components that require an aging management review for license renewal include the primary loop piping and associated connections to other support systems, reactor vessel, reactor vessel internals, pressurizer. steam generators, reactor coolant pumps, and all other inter-connected piping, pipe fittings, valves, and bolting. All major RCS components are located inside the reactor building. Based on the evaluation findings of recently submitted license renewal applications for pressurized water reactors, this paper presents the plant programs and/or activities proposed by the applicants to manage the effects of aging. These programs and/or activities provide reasonable assurance that the intended function(s) of these mechanical components will be maintained for the period of extended operation. The license renewal application includes identification of RCS subcomponents that are within the scope of license renewal and are vulnerable to age-related degradation when exposed to environmental and operational conditions. determination of the effects of aging on their intended safety functions. and implementation of the aging management programs and/or activities including both current and new programs. Industry-wide operating experience, including generic communication by the NRC, is part of the aging management review for the RCS components. In addition, this paper discusses time-limited aging analyses associated with neutron embrittlement of the reactor vessel beltline region and thermal fatigue

  2. CORROSION ISSUES ASSOCIATED WITH AUSTENITIC STAINLESS STEEL COMPONENTS USED IN NUCLEAR MATERIALS EXTRACTION AND SEPARATION PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    Mickalonis, J.; Louthan, M.; Sindelar, R.

    2012-12-17

    This paper illustrated the magnitude of the systems, structures and components used at the Savannah River Site for nuclear materials extraction and separation processes. Corrosion issues, including stress corrosion cracking, pitting, crevice corrosion and other corrosion induced degradation processes are discussed and corrosion mitigation strategies such as a chloride exclusion program and corrosion release testing are also discussed.

  3. Background, design and conceptual model of the cluster randomized multiple-component workplace study

    DEFF Research Database (Denmark)

    Christensen, Jeanette Reffstrup; Bredahl, Thomas Viskum Gjelstrup; Hadrévi, Jenny

    2016-01-01

    health care workers. This was done through a multi-component intervention including 1) intelligent physical exercise training (IPET), dietary advice and weight loss (DAW) and cognitive behavioural training (CBT). DISCUSSION: The FRIDOM program has the potential to provide evidence-based knowledge...

  4. A Leisure Activities Curricular Component for Severely Handicapped Youth: Why and How.

    Science.gov (United States)

    Voeltz, Luanna M.; Apffel, James A.

    1981-01-01

    A rationale for including a leisure time activities curriculum component in educational programing for severely handicapped individuals is presented. The importance of play and the constructive use of leisure time is described through the use of a model demonstration project. (JN)

  5. Component effects in mixture experiments

    International Nuclear Information System (INIS)

    Piepel, G.F.

    1980-01-01

    In a mixture experiment, the response to a mixture of q components is a function of the proportions x 1 , x 2 , ..., x/sub q/ of components in the mixture. Experimental regions for mixture experiments are often defined by constraints on the proportions of the components forming the mixture. The usual (orthogonal direction) definition of a factor effect does not apply because of the dependence imposed by the mixture restriction, /sup q/Σ/sub i=1/ x/sub i/ = 1. A direction within the experimental region in which to compute a mixture component effect is presented and compared to previously suggested directions. This new direction has none of the inadequacies or errors of previous suggestions while having a more meaningful interpretation. The distinction between partial and total effects is made. The uses of partial and total effects (computed using the new direction) in modification and interpretation of mixture response prediction equations are considered. The suggestions of the paper are illustrated in an example from a glass development study in a waste vitrification program. 5 figures, 3 tables

  6. Evaluation of composite components on the Bell 206L and Sikorsky S-76 helicopters

    Science.gov (United States)

    Baker, Donald J.

    1990-01-01

    Progress on two programs to evaluate structural composite components in flight service on Bell 206L and Sikorsky S-76 commercial helicopters is described. Forty ship sets of composite components that include the litter door, baggage door, forward fairing, and vertical fin have been installed on Bell Model 206L helicopters that are operating in widely different climates. Component installation started in 1981 and selected components were removed and tested at prescribed intervals over a ten year evaluation. Four horizontal stabilizers and eleven tail rotor spars that are production components on the S-76 helicopter were tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, materials used to fabricate the components were exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 123,000 hours of accumulated service on the Bell 206L components and 53,000 hours on the Sikorsky S-76 components are reported. Seventy-eight Bell 206L components were removed and tested statically. Results of seven years of ground exposure of materials used to fabricate the Bell 206L components are presented. Results of tests on four Sikorsky S-76 horizontal stabilizers and eleven tail rotor spars are also presented. Panels of material used to fabricate the Sikorsky S-76 components that were exposed for six years were tested and results are presented.

  7. Transgenerational developmental programming.

    Science.gov (United States)

    Aiken, Catherine E; Ozanne, Susan E

    2014-01-01

    The concept of developmental programming suggests that the early life environment influences offspring characteristics in later life, including the propensity to develop diseases such as the metabolic syndrome. There is now growing evidence that the effects of developmental programming may also manifest in further generations without further suboptimal exposure. This review considers the evidence, primarily from rodent models, for effects persisting to subsequent generations, and evaluates the mechanisms by which developmental programming may be transmitted to further generations. In particular, we focus on the potential role of the intrauterine environment in contributing to a developmentally programmed phenotype in subsequent generations. The literature was systematically searched at http://pubmed.org and http://scholar.google.com to identify published findings regarding transgenerational (F2 and beyond) developmental programming effects in human populations and animal models. Transmission of programming effects is often viewed as a form of epigenetic inheritance, either via the maternal or paternal line. Evidence exists for both germline and somatic inheritance of epigenetic modifications which may be responsible for phenotypic changes in further generations. However, there is increasing evidence for the role of both extra-genomic components of the zygote and the interaction of the developing conceptus with the intrauterine environment in propagating programming effects. The contribution of a suboptimal reproductive tract environment or maternal adaptations to pregnancy may be critical to inheritance of programming effects via the maternal line. As the effects of age exacerbate the programmed metabolic phenotype, advancing maternal age may increase the likelihood of developmental programming effects being transmitted to further generations. We suggest that developmental programming effects could be propagated through the maternal line de novo in generations

  8. 78 FR 32689 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-05-31

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2958] Certain Portable Electronic Communications Devices... Relating to the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled...

  9. 78 FR 38361 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

    Science.gov (United States)

    2013-06-26

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-885] Certain Portable Electronic Communications... States Code AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on May 23, 2013, under section...

  10. Comment on “Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits”

    OpenAIRE

    Lahiri, Abhirup

    2009-01-01

    This comment is related to the recently published article “Active and Passive Electronic Components” by S. Maheshwari (2007), which presents single current differencing buffered amplifier (CDBA) and current-controlled current differencing buffered amplifier- (CC-CDBA-) based first-order voltage-mode (VM) all-pass filtering (APF) sections. The paper is reviewed, and additional first-order APF realizations have been proposed.

  11. 77 FR 37067 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-06-20

    ... view of the ViewFrame II+2 prior art. FOR FURTHER INFORMATION CONTACT: Jia Chen, Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone (202) 708... Secretary, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone (202) 205...

  12. 77 FR 20048 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-04-03

    ... for the layer to be equivalent to a ``uniaxial'' layer under the ALJ's construction? Please limit your...) claim construction of the limitation ``layer'' of the asserted claims of the '006 patent; (2... rubbed,'' ``a plurality of spacing elements,'' and ``an affixing layer'' of the asserted claims of the...

  13. 76 FR 68785 - Certain Communications Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2011-11-07

    ... complaint names as respondents Cisco Systems, Inc. of San Jose, CA; Cisco Consumer Products LLC of Irvine, CA; Cisco Systems International B.V. of Amsterdam, Netherlands; Cisco-Linksys LLC of Irvine, CA...

  14. 76 FR 76436 - Certain Communication Equipment, Components Thereof, and Products Containing the Same, Including...

    Science.gov (United States)

    2011-12-07

    ... AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a...: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134. Cisco Consumer Products LLC, 120 Theory... CH, Amsterdam, Netherlands. Cisco-Linksys LLC, 121 Theory Drive, Irvine, CA 92617. Hewlett-Packard Co...

  15. Transition processes in solid-phase electrochemical systems including sulfur-containing components

    International Nuclear Information System (INIS)

    Arkhipova, N.V.; Mikhajlova, A.M.; Seryanov, Yu.V.

    2005-01-01

    Transition processes in direct-contact systems Li/Sb 2 S 3 and Li/Sb 2 S 5 are studied. As shown by potentiodynamic voltammetry, an Li 3 SbS 3 interphase is the most probable product of the cathodic reduction at direct-contact interfaces. At certain polarizations and current densities, under potentiodynamic and galvanostatic conditions, the main current-producing processes that lead to the formation of the Li 3 SbS 3 interphase compete with passivating cathodic reactions which occur via the mechanism of monolayer adsorption and result in the formation of an Li 2 S product which blocks grains of the lithium thiostibnite interphase. Effective transfer coefficients of passivating reactions are twice those of the main current-producing cathodic reactions [ru

  16. Components of Sexual Identity

    Science.gov (United States)

    Shively, Michael G.; DeCecco, John P.

    1977-01-01

    This paper examines the four components of sexual identity: biological sex, gender identity, social sex-role, and sexual orientation. Theories about the development of each component and how they combine and conflict to form the individual's sexual identity are discussed. (Author)

  17. Towards Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Ahrendt, Peter; Larsen, Jan

    2005-01-01

    Cognitive component analysis (COCA) is here defined as the process of unsupervised grouping of data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. We have earlier demonstrated that independent components analysis is relevant for representing...

  18. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area......The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of the test sample by movement of the probe relative to the surface of the test sample into the specific orientation.; The probe may further comprise a contact detector (14) extending from the supporting body arranged so as to contact the surface of the test sample prior to any one of the plurality...

  19. Neoclassical transport including collisional nonlinearity.

    Science.gov (United States)

    Candy, J; Belli, E A

    2011-06-10

    In the standard δf theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction δf is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlüter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  20. Romanian network for structural integrity assessment of nuclear components

    International Nuclear Information System (INIS)

    Roth, Maria; Constantinescu, Dan Mihai; Brad, Sebastian; Ducu, Catalin

    2008-01-01

    Full text: Based of the Romanian option to develop and operate nuclear facilities, using as model the networks created at European level and taking into account the international importance of the structural integrity assessments for lifetime extension of the nuclear components, a national Project started since 2005 in the framework of the National Program 'Research of Excellence', Modulus I 2006-2008, managed by the Ministry of Education and Research. Entitled 'Integrated Network for Structural Integrity Monitoring of Critical Components in Nuclear Facilities', with the acronym RIMIS, the Project had two main objectives: - to elaborate a procedure applicable to the structural integrity assessment of the critical components used in Romanian nuclear facilities; - to integrate the national networking in a similar one, at European level, to enhance the scientific significance of Romanian R and D organizations as well as to increase the contribution to solving one of the major issue of the nuclear field. The paper aimed to present the activities performed in the Romanian institutes, involved in the Project, the final results obtained as part of the R and D activities, including experimental, theoretical and modeling ones regarding structural integrity assessment of nuclear components employed in CANDU type reactors. Also the activity carried out in the framework of the NULIFE network, created at European level of the FP6 Program and sustained by the RIMIS network will be described. (authors)