Sandstone columns of the 3rd Nile Cataract (Nubia, Northern Sudan)

Czech Academy of Sciences Publication Activity Database

Cílek, Václav; Adamovič, Jiří; Suková, L.

2015-01-01

Roč. 59, Supplement 1 (2015), s. 151-165 ISSN 0372-8854 Grant - others:Program interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100130902 Institutional support: RVO:67985831 Keywords : Nubian sandstone * columnar jointing * Voronoi fragmentation * 3rd Nile Cataract * Sudan Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.103, year: 2015

Developing Product Lines with 3rd-party components

NARCIS (Netherlands)

De Jonge, M.

2007-01-01

The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

Lecture Notes in Statistics. 3rd Semester

DEFF Research Database (Denmark)

The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models.......The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models....

AN ANALYSIS OF STUDENTS’ SPEAKING ABILITY IN ENGLISH CONVERSATION CLUB (ECC PROGRAM AT THE 3rd SEMESTER

Directory of Open Access Journals (Sweden)

M. Fadhly Farhy Abbas

2017-07-01

Full Text Available This research is based on students’ speaking ability who had followed the EnglishConversation Club (ECC program especially for the third semester of English Department. Thepurpose of this study was to analyze the students’ speaking ability at the 3rd semester in the EnglishConversation Club FKIP UNILAK Pekanbaru. The type of the research was mixed method in typeof explanatory design. The number of participant was 53 students. The researcher used twoinstruments, those were test and interview. In analyzing the data, it used in descriptive statistics.The result of the analysis showed that the average score of 3rd semester students’ speaking abilitywas 45.42. It can be concluded that the students’ speaking ability was categorized into failed . Thescore of Standard Deviation was 7.02, Variance was 49.30, and Range was 36 points . It meansthat the students’ speaking ability was homogeneous. According to the Z-Score, it can be seen that49.06% students’ ability was higher than average and 50.94% students ability was below theaverage. In conclusion, the students’ ability in learning speaking English was failed, it had beenaffected by some factors, those were lack of vocabulary, grammar and motivation. It was supportedby the interview, eventhough the students’ perception to English Conversation Club (ECCprogram was positive, but in fact, the students’ frequency to speak English was seldom, they wereless practice speaking English everyday.Keywords : Speaking , English Conversation Club (ECC

Code quality issues in student programs

NARCIS (Netherlands)

Keuning, H.W.; Heeren, B.J.; Jeuring, J.T.

2017-01-01

Because low quality code can cause serious problems in software systems, students learning to program should pay attention to code quality early. Although many studies have investigated mistakes that students make during programming, we do not know much about the quality of their code. This study

Financing R&D Projects in Southern Italy: The “Technological Vouchers and Cooperative Research” Program

Directory of Open Access Journals (Sweden)

Gianpaolo Iazzolino

2013-09-01

Full Text Available The paper deals with the evaluation and financing of research and innovation projects. The paper analyzes and discusses the “Technological Vouchers and Cooperative Research” program in the Calabria Region (Southern Italy, as a program for financing R&D projects in a geographical area far behind in development. Three real cases of R&D projects are described. The program was effective as regards the stimulus to realizing R&D activities by Calabrian SMEs and furthermore in relation to the improvement of cooperation between SMEs, research centers, universities and technological laboratories. The weak points of the program mainly regard the evaluation phase that made it impossible to get a feedback useful for policy and for driving future agenda.

Streamlining of the RELAP5-3D Code

International Nuclear Information System (INIS)

Mesina, George L; Hykes, Joshua; Guillen, Donna Post

2007-01-01

RELAP5-3D is widely used by the nuclear community to simulate general thermal hydraulic systems and has proven to be so versatile that the spectrum of transient two-phase problems that can be analyzed has increased substantially over time. To accommodate the many new types of problems that are analyzed by RELAP5-3D, both the physics and numerical methods of the code have been continuously improved. In the area of computational methods and mathematical techniques, many upgrades and improvements have been made decrease code run time and increase solution accuracy. These include vectorization, parallelization, use of improved equation solvers for thermal hydraulics and neutron kinetics, and incorporation of improved library utilities. In the area of applied nuclear engineering, expanded capabilities include boron and level tracking models, radiation/conduction enclosure model, feedwater heater and compressor components, fluids and corresponding correlations for modeling Generation IV reactor designs, and coupling to computational fluid dynamics solvers. Ongoing and proposed future developments include improvements to the two-phase pump model, conversion to FORTRAN 90, and coupling to more computer programs. This paper summarizes the general improvements made to RELAP5-3D, with an emphasis on streamlining the code infrastructure for improved maintenance and development. With all these past, present and planned developments, it is necessary to modify the code infrastructure to incorporate modifications in a consistent and maintainable manner. Modifying a complex code such as RELAP5-3D to incorporate new models, upgrade numerics, and optimize existing code becomes more difficult as the code grows larger. The difficulty of this as well as the chance of introducing errors is significantly reduced when the code is structured. To streamline the code into a structured program, a commercial restructuring tool, FOR( ) STRUCT, was applied to the RELAP5-3D source files. The

The R+D radiological protection program in the European Communities

International Nuclear Information System (INIS)

Mingot Buades, F.

1993-01-01

The R+D program a radiological protection for the year 1992 has lied basically on three areas: I .- Radiological exposure of man II .- Radiation effects on man (evaluation, prevention and treatment) III.- Risks and management of radiation exposure

R&D of Nb$_{3}$Sn accelerator magnets at Fermilab

CERN Document Server

Zlobin, A V; Andreev, N; Barzi, E; Bordini, B; Bossert, R; Carcagno, R; Chichili, D R; Di Marco, J; Elementi, L; Fehér, S; Kashikhin, V S; Kashikhin, V V; Kephart, R; Lamm, M J; Limon, P J; Novitski, I; Orris, D; Pischalnikov, Y; Schlabach, P; Stanek, R; Strait, J; Sylvester, C D; Tartaglia, M; Tompkins, J C; Turrioni, D; Velev, G; Yamada, R; Yarba, V A; 10.1109/TASC.2005.849507

2005-01-01

Fermilab is developing and investigating different high-field magnets (HFM) for present and future accelerators. The HFM R&D program focused on the 10-12 T magnets based on Nb/sub 3/Sn superconductor and explored both basic magnet technologies for brittle superconductors-wind-and-react and react-and-wind. Magnet design studies in support of LHC upgrades and VLHC were conducted. A series of 1-m long cos-theta dipole models based on the wind-and-react technique was fabricated and tested. Three 1-m long flat racetracks and the common coil dipole model, based on a single-layer coil and react-and-wind technique, were also fabricated and tested. Extensive theoretical and experimental studies of electro-magnetic instabilities in Nb/sub 3/Sn strands, cables and magnets were performed and led to a successful 10 T dipole model. This paper presents the details of Fermilab's HFM program, reports its status and major results, and formulates the next steps for the program.

Single-phase multi-dimensional thermohydraulics direct numerical simulation code DINUS-3. Input data description

Energy Technology Data Exchange (ETDEWEB)

Muramatsu, Toshiharu [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

1998-08-01

This report explains the numerical methods and the set-up method of input data for a single-phase multi-dimensional thermohydraulics direct numerical simulation code DINUS-3 (Direct Numerical Simulation using a 3rd-order upwind scheme). The code was developed to simulate non-stationary temperature fluctuation phenomena related to thermal striping phenomena, developed at Power Reactor and Nuclear Fuel Development Corporation (PNC). The DINUS-3 code was characterized by the use of a third-order upwind scheme for convection terms in instantaneous Navier-Stokes and energy equations, and an adaptive control system based on the Fuzzy theory to control time step sizes. Author expect this report is very useful to utilize the DINUS-3 code for the evaluation of various non-stationary thermohydraulic phenomena in reactor applications. (author)

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

Energy Technology Data Exchange (ETDEWEB)

Ruegg, Rosalie [TIA Consulting, Inc. (United States); O' Connor, Alan C. [RTI International, Research Triangle Park, NC (United States); Loomis, Ross J. [RTI International, Research Triangle Park, NC (United States)

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

GAPCON-THERMAL-3 code description

International Nuclear Information System (INIS)

Lanning, D.D.; Mohr, C.L.; Panisko, F.E.; Stewart, K.B.

1978-01-01

GAPCON-3 is a computer program that predicts the thermal and mechanical behavior of an operating fuel rod during its normal lifetime. The code calculates temperatures, dimensions, stresses, and strains for the fuel and the cladding in both the radial and axial directions for each step of the user specified power history. The method of weighted residuals is for the steady state temperature calculation, and is combined with a finite difference approximation of the time derivative for transient conditions. The stress strain analysis employs an iterative axisymmetric finite element procedure that includes plasticity and creep for normal and pellet-clad mechanical interaction loads. GAPCON-3 can solve steady state and operational transient problems. Comparisons of GAPCON-3 predictions to both closed form analytical solutions and actual inpile instrumented fuel rod data have demonstrated the ability of the code to calculate fuel rod behavior. GAPCON-3 features a restart capability and an associated plot package unavailable in previous GAPCON series codes

GAPCON-THERMAL-3 code description

Energy Technology Data Exchange (ETDEWEB)

Lanning, D.D.; Mohr, C.L.; Panisko, F.E.; Stewart, K.B.

1978-01-01

GAPCON-3 is a computer program that predicts the thermal and mechanical behavior of an operating fuel rod during its normal lifetime. The code calculates temperatures, dimensions, stresses, and strains for the fuel and the cladding in both the radial and axial directions for each step of the user specified power history. The method of weighted residuals is for the steady state temperature calculation, and is combined with a finite difference approximation of the time derivative for transient conditions. The stress strain analysis employs an iterative axisymmetric finite element procedure that includes plasticity and creep for normal and pellet-clad mechanical interaction loads. GAPCON-3 can solve steady state and operational transient problems. Comparisons of GAPCON-3 predictions to both closed form analytical solutions and actual inpile instrumented fuel rod data have demonstrated the ability of the code to calculate fuel rod behavior. GAPCON-3 features a restart capability and an associated plot package unavailable in previous GAPCON series codes.

R&D Proposal for the National Muon Acccelerator Program

Energy Technology Data Exchange (ETDEWEB)

2010-02-01

This document contains a description of a multi-year national R&D program aimed at completing a Design Feasibility Study (DFS) for a Muon Collider and, with international participation, a Reference Design Report (RDR) for a muon-based Neutrino Factory. It also includes the supporting component development and experimental efforts that will inform the design studies and permit an initial down-selection of candidate technologies for the ionization cooling and acceleration systems. We intend to carry out this plan with participants from the host national laboratory (Fermilab), those from collaborating U.S. national laboratories (ANL, BNL, Jlab, LBNL, and SNAL), and those from a number of other U.S. laboratories, universities, and SBIR companies. The R&D program that we propose will provide the HEP community with detailed information on future facilities based on intense beams of muons - the Muon Collider and the Neutrino Factory. We believe that these facilities offer the promise of extraordinary physics capabilities. The Muon Collider presents a powerful option to explore the energy frontier and the Neutrino Factory gives the opportunity to perform the most sensitive neutrino oscillation experiments possible, while also opening expanded avenues for the study of new physics in the neutrino sector. The synergy between the two facilities presents the opportunity for an extremely broad physics program and a unique pathway in accelerator facilities. Our work will give clear answers to the questions of expected capabilities and performance of these muon-based facilities, and will provide defensible ranges for their cost. This information, together with the physics insights gained from the next-generation neutrino and LHC experiments, will allow the HEP community to make well-informed decisions regarding the optimal choice of new facilities. We believe that this work is a critical part of any broad strategic program in accelerator R&D and, as the P5 panel has recently

R&D PROPOSAL FOR THE NATIONAL MUON ACCELERATOR PROGRAM

Energy Technology Data Exchange (ETDEWEB)

Muon Accelerator Program; Zisman, Michael S.; Geer, Stephen

2010-02-24

This document contains a description of a multi-year national R&D program aimed at completing a Design Feasibility Study (DFS) for a Muon Collider and, with international participation, a Reference Design Report (RDR) for a muon-based Neutrino Factory. It also includes the supporting component development and experimental efforts that will inform the design studies and permit an initial down-selection of candidate technologies for the ionization cooling and acceleration systems. We intend to carry out this plan with participants from the host national laboratory (Fermilab), those from collaborating U.S. national laboratories (ANL, BNL, Jlab, LBNL, and SNAL), and those from a number of other U.S. laboratories, universities, and SBIR companies. The R&D program that we propose will provide the HEP community with detailed information on future facilities based on intense beams of muons--the Muon Collider and the Neutrino Factory. We believe that these facilities offer the promise of extraordinary physics capabilities. The Muon Collider presents a powerful option to explore the energy frontier and the Neutrino Factory gives the opportunity to perform the most sensitive neutrino oscillation experiments possible, while also opening expanded avenues for the study of new physics in the neutrino sector. The synergy between the two facilities presents the opportunity for an extremely broad physics program and a unique pathway in accelerator facilities. Our work will give clear answers to the questions of expected capabilities and performance of these muon-based facilities, and will provide defensible ranges for their cost. This information, together with the physics insights gained from the next-generation neutrino and LHC experiments, will allow the HEP community to make well-informed decisions regarding the optimal choice of new facilities. We believe that this work is a critical part of any broad strategic program in accelerator R&D and, as the P5 panel has recently

R&D Challenges for SFR Design and Safety Analysis – Opportunities for International Cooperations

International Nuclear Information System (INIS)

Devictor, Nicolas

2013-01-01

Examples of R&D challenges related to safety have been presented. For any domain, R&D activities includes modelling, codes development and their V&V process, with the support of experimental programs. The success in the R&D will help the safety case and the acceptability of SFR. Some of these activities are relevant for international cooperation especially benchmarks and sharing of experimental facilities. This last point could take benefit of recent catalogues experimental facilities (already operational or in project), for example from the TAREF Task Force of OECD/NEA and the European project ADRIANA

PREFACE: 3rd International Congress on Ceramics (ICC3)

Science.gov (United States)

Niihara, Koichi; Ohji, Tatsuki; Sakka, Yoshio

2011-10-01

Early in 2005, the American Ceramic Society, the European Ceramic Society and the Ceramic Society of Japan announced a collaborative effort to provide leadership for the global ceramics community that would facilitate the use of ceramic and glass materials. That effort resulted in an agreement to organize a new biennial series of the International Congress on Ceramics, convened by the International Ceramic Federation (ICF). In order to share ideas and visions of the future for ceramic and glass materials, the 1st International Congress on Ceramics (ICC1) was held in Canada, 2006, under the organization of the American Ceramic Society, and the 2nd Congress (ICC2) was held in Italy, 2008, hosted by the European Ceramic Society. Organized by the Ceramic Society of Japan, the 3rd Congress (ICC3) was held in Osaka, Japan, 14-18 November 2010. Incorporating the 23rd Fall Meeting of the Ceramic Society of Japan and the 20th Iketani Conference, ICC3 was also co-organized by the Iketani Science and Technology Foundation, and was endorsed and supported by ICF, Asia-Oceania Ceramic Federation (AOCF) as well as many other organizations. Following the style of the previous two successful Congresses, the program was designed to advance ceramic and glass technologies to the next generation through discussion of the most recent advances and future perspectives, and to engage the worldwide ceramics community in a collective effort to expand the use of these materials in both conventional as well as new and exciting applications. ICC3 consisted of 22 voluntarily organized symposia in the most topical and essential themes of ceramic and glass materials, including Characterization, design and processing technologies Electro, magnetic and optical ceramics and devices Energy and environment related ceramics and systems Bio-ceramics and bio-technologies Ceramics for advanced industry and safety society Innovation in traditional ceramics It also contained the Plenary Session and the

CERN openlab: Engaging industry for innovation in the LHC Run 3-4 R&D programme

Science.gov (United States)

Girone, M.; Purcell, A.; Di Meglio, A.; Rademakers, F.; Gunne, K.; Pachou, M.; Pavlou, S.

2017-10-01

LHC Run3 and Run4 represent an unprecedented challenge for HEP computing in terms of both data volume and complexity. New approaches are needed for how data is collected and filtered, processed, moved, stored and analysed if these challenges are to be met with a realistic budget. To develop innovative techniques we are fostering relationships with industry leaders. CERN openlab is a unique resource for public-private partnership between CERN and leading Information Communication and Technology (ICT) companies. Its mission is to accelerate the development of cutting-edge solutions to be used by the worldwide HEP community. In 2015, CERN openlab started its phase V with a strong focus on tackling the upcoming LHC challenges. Several R&D programs are ongoing in the areas of data acquisition, networks and connectivity, data storage architectures, computing provisioning, computing platforms and code optimisation and data analytics. This paper gives an overview of the various innovative technologies that are currently being explored by CERN openlab V and discusses the long-term strategies that are pursued by the LHC communities with the help of industry in closing the technological gap in processing and storage needs expected in Run3 and Run4.

International Training Program: 3D S. Un. Cop - Scaling, Uncertainty and 3D Thermal-Hydraulics/Neutron-Kinetics Coupled Codes Seminar

International Nuclear Information System (INIS)

Pertuzzi, A.; D'Auria, F.; Bajs, T.; Reventos, F.

2006-01-01

Thermal-hydraulic system computer codes are extensively used worldwide for analysis of nuclear facilities by utilities, regulatory bodies, nuclear power plant designers and vendors, nuclear fuel companies, research organizations, consulting companies, and technical support organizations. The computer code user represents a source of uncertainty that can influence the results of system code calculations. This influence is commonly known as the 'user effect' and stems from the limitations embedded in the codes as well as from the limited capability of the analysts to use the codes. Code user training and qualification is an effective means for reducing the variation of results caused by the application of the codes by different users. This paper describes a systematic approach to training code users who, upon completion of the training, should be able to perform calculations making the best possible use of the capabilities of best estimate codes. In other words, the program aims at contributing towards solving the problem of user effect. The 3D S.UN.COP (Scaling, Uncertainty and 3D COuPled code calculations) seminars have been organized as follow-up of the proposal to IAEA for the Permanent Training Course for System Code Users (D'Auria, 1998). Four seminars have been held at University of Pisa (2003, 2004), at The Pennsylvania State University (2004) and at University of Zagreb (2005). It was recognized that such courses represented both a source of continuing education for current code users and a mean for current code users to enter the formal training structure of a proposed 'permanent' stepwise approach to user training. The 3D S.UN.COP 2005 was successfully held with the participation of 19 persons coming from 9 countries and 14 different institutions (universities, vendors, national laboratories and regulatory bodies). More than 15 scientists were involved in the organization of the seminar, presenting theoretical aspects of the proposed methodologies and

RD50 Prolongation Request 2018

CERN Document Server

Casse, Gianluigi

2018-01-01

With this document, we request the prolongation of the CERN RD50 research program for 5 years. A very brief historical review of the RD50 research program since the RD50 project approval by the Research Board in the year 2002 is presented and the biggest RD50 achievements are highlighted. The present composition of the collaboration, its organizational structure, and the research methodology are described. The role of RD50 in the present various upgrade and research programs of the LHC Experiments community is given and the overall work plan explained. Finally, a detailed 5-years work program with precise milestones and deliverables for the various research activities is presented. We conclude with our prolongation request towards the LHCC.

3rd Abel Symposium

CERN Document Server

Owren, Brynjulf

2008-01-01

The 2006 Abel symposium is focusing on contemporary research involving interaction between computer science, computational science and mathematics. In recent years, computation has been affecting pure mathematics in fundamental ways. Conversely, ideas and methods of pure mathematics are becoming increasingly important within computational and applied mathematics. At the core of computer science is the study of computability and complexity for discrete mathematical structures. Studying the foundations of computational mathematics raises similar questions concerning continuous mathematical structures. There are several reasons for these developments. The exponential growth of computing power is bringing computational methods into ever new application areas. Equally important is the advance of software and programming languages, which to an increasing degree allows the representation of abstract mathematical structures in program code. Symbolic computing is bringing algorithms from mathematical analysis into the...

International training program: 3D S.UN.COP - Scaling, uncertainty and 3D thermal-hydraulics/neutron-kinetics coupled codes seminar

International Nuclear Information System (INIS)

Petruzzi, A.; D'Auria, F.; Bajs, T.; Reventos, F.

2006-01-01

Thermal-hydraulic system computer codes are extensively used worldwide for analysis of nuclear facilities by utilities, regulatory bodies, nuclear power plant designers and vendors, nuclear fuel companies, research organizations, consulting companies, and technical support organizations. The computer code user represents a source of uncertainty that can influence the results of system code calculations. This influence is commonly known as the 'user effect' and stems from the limitations embedded in the codes as well as from the limited capability of the analysts to use the codes. Code user training and qualification is an effective means for reducing the variation of results caused by the application of the codes by different users. This paper describes a systematic approach to training code users who, upon completion of the training, should be able to perform calculations making the best possible use of the capabilities of best estimate codes. In other words, the program aims at contributing towards solving the problem of user effect. The 3D S.UN.COP 2005 (Scaling, Uncertainty and 3D COuPled code calculations) seminar has been organized by University of Pisa and University of Zagreb as follow-up of the proposal to IAEA for the Permanent Training Course for System Code Users (D'Auria, 1998). It was recognized that such a course represented both a source of continuing education for current code users and a means for current code users to enter the formal training structure of a proposed 'permanent' stepwise approach to user training. The seminar-training was successfully held with the participation of 19 persons coming from 9 countries and 14 different institutions (universities, vendors, national laboratories and regulatory bodies). More than 15 scientists were involved in the organization of the seminar, presenting theoretical aspects of the proposed methodologies and holding the training and the final examination. A certificate (LA Code User grade) was released

Summary of the 3rd workshop on the reduced-moderation water reactor

International Nuclear Information System (INIS)

Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi

2000-06-01

The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

Summary of the 3rd workshop on the reduced-moderation water reactor

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

2000-06-01

The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

Impressions from the 3rd Nordcode Seminar & Workshop

DEFF Research Database (Denmark)

Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

2005-01-01

This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

Evaluation of the FRAPCON-3 Computer Code

Energy Technology Data Exchange (ETDEWEB)

Jernkvist, Lars Olof; Massih, Ali [Quantum Technologies AB, Uppsala (Sweden)

2002-03-01

The FRAPCON-3 computer code has been evaluated with respect to its applicability, modeling capability, user friendliness, source code structure and supporting experimental database. The code is intended for thermo-mechanical analyses of light water reactor nuclear fuel rods under steady-state operational conditions and moderate power excursions. It is applicable to both boiling- and pressurized water reactor fuel rods with UO{sub 2} fuel, ranging up to about 65 MWd/kg U in rod average burnup. The models and numerical methods in FRAPCON-3 are relatively simple, which makes the code transparent and also fairly easy to modify and extend for the user. The fundamental equations for heat transfer, structural analysis and fuel fission gas release are solved in one-dimensional (radial) and stationary (time-independent) form, and interaction between axial segments of the rod is confined to calculations of coolant axial flow and rod internal gas pressure. The code is fairly easy to use; fuel rod design data and time histories of fuel rod power and coolant inlet conditions are input via a single text file, and the corresponding calculated variation with time of important fuel rod parameters are printed to a single output file in textual form. The results can also be presented in graphical form through an interface to the general graphics program xmgr. FRAPCON-3 also provides the possibility to export calculated results to the transient fuel rod analysis code FRAPTRAN, where the data can be used as burnup-dependent initial conditions to a postulated transient. Most of the source code to FRAPCON-3 is written in Fortran-IV, which is an archaic, non-standard dialect of the Fortran programming language. Since Fortran-IV is not accepted by all compilers for the latest standard of the language, Fortran-95, there is a risk that the source code must be partly rewritten in the future. Documentation of the code comprises (i) a general code description, which briefly presents models

Evaluation of the FRAPCON-3 Computer Code

International Nuclear Information System (INIS)

Jernkvist, Lars Olof; Massih, Ali

2002-03-01

The FRAPCON-3 computer code has been evaluated with respect to its applicability, modeling capability, user friendliness, source code structure and supporting experimental database. The code is intended for thermo-mechanical analyses of light water reactor nuclear fuel rods under steady-state operational conditions and moderate power excursions. It is applicable to both boiling- and pressurized water reactor fuel rods with UO 2 fuel, ranging up to about 65 MWd/kg U in rod average burnup. The models and numerical methods in FRAPCON-3 are relatively simple, which makes the code transparent and also fairly easy to modify and extend for the user. The fundamental equations for heat transfer, structural analysis and fuel fission gas release are solved in one-dimensional (radial) and stationary (time-independent) form, and interaction between axial segments of the rod is confined to calculations of coolant axial flow and rod internal gas pressure. The code is fairly easy to use; fuel rod design data and time histories of fuel rod power and coolant inlet conditions are input via a single text file, and the corresponding calculated variation with time of important fuel rod parameters are printed to a single output file in textual form. The results can also be presented in graphical form through an interface to the general graphics program xmgr. FRAPCON-3 also provides the possibility to export calculated results to the transient fuel rod analysis code FRAPTRAN, where the data can be used as burnup-dependent initial conditions to a postulated transient. Most of the source code to FRAPCON-3 is written in Fortran-IV, which is an archaic, non-standard dialect of the Fortran programming language. Since Fortran-IV is not accepted by all compilers for the latest standard of the language, Fortran-95, there is a risk that the source code must be partly rewritten in the future. Documentation of the code comprises (i) a general code description, which briefly presents models

File list: Oth.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Oth.Lar.50.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX318781,SRX31878...5306 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.50.AllAg.3rd_instar.bed ...

Development of an Auto-Validation Program for MARS Code Assessments

International Nuclear Information System (INIS)

Lee, Young Jin; Chung, Bub Dong

2006-01-01

MARS (Multi-dimensional Analysis of Reactor Safety) code is a best-estimate thermal hydraulic system analysis code developed at KAERI. It is important for a thermal hydraulic computer code to be assessed against theoretical and experimental data to verify and validate the performance and the integrity of the structure, models and correlations of the code. The code assessment efforts for complex thermal hydraulics code such as MARS code can be tedious, time-consuming and require large amount of human intervention in data transfer to see the results in graphic forms. Code developers produce many versions of a code during development and each version need to be verified for integrity. Thus, for MARS code developers, it is desirable to have an automatic way of carrying out the code assessment calculations. In the present work, an Auto-Validation program that carries out the code assessment efforts has been developed. The program uses the user supplied configuration file (with '.vv' extension) which contain commands to read input file, to execute the user selected MARS program, and to generate result graphs. The program can be useful if a same set of code assessments is repeated with different versions of the code. The program is written with the Delphi program language. The program runs under the Microsoft Windows environment

Theoretical atomic physics code development I: CATS: Cowan Atomic Structure Code

International Nuclear Information System (INIS)

Abdallah, J. Jr.; Clark, R.E.H.; Cowan, R.D.

1988-12-01

An adaptation of R.D. Cowan's Atomic Structure program, CATS, has been developed as part of the Theoretical Atomic Physics (TAPS) code development effort at Los Alamos. CATS has been designed to be easy to run and to produce data files that can interface with other programs easily. The CATS produced data files currently include wave functions, energy levels, oscillator strengths, plane-wave-Born electron-ion collision strengths, photoionization cross sections, and a variety of other quantities. This paper describes the use of CATS. 10 refs

File list: Oth.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Oth.Lar.10.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX104963,SRX10497...4971,SRX331403 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.10.AllAg.3rd_instar.bed ...

File list: Oth.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Oth.Lar.20.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX318781,SRX31878...1403,SRX495243 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.20.AllAg.3rd_instar.bed ...

File list: Oth.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Oth.Lar.05.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX104964,SRX10496...1403,SRX495243 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.05.AllAg.3rd_instar.bed ...

Further assessment of the chemical modelling of iodine in IMPAIR 3 code using ACE/RTF data

International Nuclear Information System (INIS)

Cripps, R.C.; Guentay, S.

1996-01-01

This paper introduces the assessment of the computer code IMPAIR 3 (Iodine Matter Partitioning And Iodine Release) which simulates physical and chemical iodine processes in a LWR containment with one or more compartments under conditions relevant to a severe accident in a nuclear reactor. The first version was published in 1992 to replace both the multi-compartment code IMPAIR 2/M and the single-compartment code IMPAIR 2.2. IMPAIR 2.2 was restricted to a single pH value specified before programme execution and precluded any variation of pH or calculation of H + changes during program execution. This restriction is removed in IMPAIR 3. Results of the IMPAIR 2.2 assessment using ACE/RTF Test 2 and the acidic phase of Test 3 B data were presented at the 3rd CSNI Workshop. The purpose of the current assessment is to verify the IMPAIR 3 capability to follow the whole test duration with changing boundary conditions. Besides revisiting ACE/RTF Test 3B, Test 4 data were also used for the current assessment. A limited data analysis was conducted using the outcome of the current ACEX iodine work to understand the iodine behaviour observed during these tests. This paper presents comparisons of the predicted results with the test data. The code capabilities are demonstrated to focus on still unresolved modelling problems. The unclear behaviour observed in the gaseous molecular iodine behaviour and its inconclusive effect on the calculated behaviour in the acidic phase of the Test 4 and importance of the catalytic effect of stainless steel are also indicated. (author) 18 figs., 1 tab., 11 refs

Further assessment of the chemical modelling of iodine in IMPAIR 3 code using ACE/RTF data

Energy Technology Data Exchange (ETDEWEB)

Cripps, R C; Guentay, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1996-12-01

This paper introduces the assessment of the computer code IMPAIR 3 (Iodine Matter Partitioning And Iodine Release) which simulates physical and chemical iodine processes in a LWR containment with one or more compartments under conditions relevant to a severe accident in a nuclear reactor. The first version was published in 1992 to replace both the multi-compartment code IMPAIR 2/M and the single-compartment code IMPAIR 2.2. IMPAIR 2.2 was restricted to a single pH value specified before programme execution and precluded any variation of pH or calculation of H{sup +} changes during program execution. This restriction is removed in IMPAIR 3. Results of the IMPAIR 2.2 assessment using ACE/RTF Test 2 and the acidic phase of Test 3 B data were presented at the 3rd CSNI Workshop. The purpose of the current assessment is to verify the IMPAIR 3 capability to follow the whole test duration with changing boundary conditions. Besides revisiting ACE/RTF Test 3B, Test 4 data were also used for the current assessment. A limited data analysis was conducted using the outcome of the current ACEX iodine work to understand the iodine behaviour observed during these tests. This paper presents comparisons of the predicted results with the test data. The code capabilities are demonstrated to focus on still unresolved modelling problems. The unclear behaviour observed in the gaseous molecular iodine behaviour and its inconclusive effect on the calculated behaviour in the acidic phase of the Test 4 and importance of the catalytic effect of stainless steel are also indicated. (author) 18 figs., 1 tab., 11 refs.

3rd International Conference on Computer Science, Applied Mathematics and Applications

CERN Document Server

Nguyen, Ngoc; Do, Tien

2015-01-01

This volume contains the extended versions of papers presented at the 3rd International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2015) held on 11-13 May, 2015 in Metz, France. The book contains 5 parts: 1. Mathematical programming and optimization: theory, methods and software, Operational research and decision making, Machine learning, data security, and bioinformatics, Knowledge information system, Software engineering. All chapters in the book discuss theoretical and algorithmic as well as practical issues connected with computation methods & optimization methods for knowledge engineering and machine learning techniques.  

Beam Optics Analysis - An Advanced 3D Trajectory Code

International Nuclear Information System (INIS)

Ives, R. Lawrence; Bui, Thuc; Vogler, William; Neilson, Jeff; Read, Mike; Shephard, Mark; Bauer, Andrew; Datta, Dibyendu; Beal, Mark

2006-01-01

Calabazas Creek Research, Inc. has completed initial development of an advanced, 3D program for modeling electron trajectories in electromagnetic fields. The code is being used to design complex guns and collectors. Beam Optics Analysis (BOA) is a fully relativistic, charged particle code using adaptive, finite element meshing. Geometrical input is imported from CAD programs generating ACIS-formatted files. Parametric data is inputted using an intuitive, graphical user interface (GUI), which also provides control of convergence, accuracy, and post processing. The program includes a magnetic field solver, and magnetic information can be imported from Maxwell 2D/3D and other programs. The program supports thermionic emission and injected beams. Secondary electron emission is also supported, including multiple generations. Work on field emission is in progress as well as implementation of computer optimization of both the geometry and operating parameters. The principle features of the program and its capabilities are presented

File list: Pol.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Pol.Lar.10.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.10.AllAg.3rd_instar.bed ...

File list: Pol.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Pol.Lar.50.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.50.AllAg.3rd_instar.bed ...

File list: ALL.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available ALL.Lar.50.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX1038029,SRX103803...SRX467060,SRX495306,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.50.AllAg.3rd_instar.bed ...

File list: Pol.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Pol.Lar.05.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287907,SRX28790...8,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.05.AllAg.3rd_instar.bed ...

File list: Pol.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Pol.Lar.20.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.20.AllAg.3rd_instar.bed ...

High field accelerator magnet R&D in Europe

CERN Document Server

Devred, Arnaud; Bottura, L; Chorowski, M; Fabbricatore, P; Leroy, D; den Ouden, A; Rifflet, J M; Rossi, L; Vincent-Viry, O; Volpini, G

2004-01-01

The LHC magnet R&D program has shown that the limit of NbTi technology at 1.9 K was in the 10-to-10.5-T range. Hence, to go beyond the 10-T threshold, it is necessary to change the superconducting material. Given the state of the art in HTS, the only serious candidate is Nb$_{3}$Sn. A series of dipole magnet models built at Twente University and LBNL as well as a vigorous program carried out at Fermilab have demonstrated the feasibility of Nb$_{3}$Sn magnet technology. The next step is to bring this technology to maturity, which require further conductor and conductor insulation development and a simplification of manufacturing processes. After a brief history, we review ongoing R&D programs in Europe and we present the Next European Dipole (NED) initiative promoted by the European Steering Group on Accelerator R&D (ESGARD).

R&D PROPOSAL FOR THE NATIONAL MUON ACCELERATOR PROGRAM

OpenAIRE

Zisman, Michael S.

2011-01-01

This document contains a description of a multi-year national R&D program aimed at completing a Design Feasibility Study (DFS) for a Muon Collider and, with international participation, a Reference Design Report (RDR) for a muon-based Neutrino Factory. It also includes the supporting component development and experimental efforts that will inform the design studies and permit an initial down-selection of candidate technologies for the ionization cooling and acceleration systems. We intend to ...

File list: ALL.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available ALL.Lar.05.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX104964,SRX104963,...SRX287718,SRX331401,SRX287658,SRX331366,SRX287906,SRX287678 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.05.AllAg.3rd_instar.bed ...

File list: ALL.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available ALL.Lar.10.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX104963,SRX104968,...SRX287718,SRX022334,SRX104976,SRX467107,SRX013086,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.10.AllAg.3rd_instar.bed ...

File list: ALL.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available ALL.Lar.20.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX1038029,SRX103803...SRX013082,SRX467107,SRX016173,SRX215499,SRX495243,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.20.AllAg.3rd_instar.bed ...

File list: Unc.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Unc.Lar.50.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX022335,SRX032124,SRX032123,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.50.AllAg.3rd_instar.bed ...

FERMILAB ACCELERATOR R&D PROGRAM TOWARDS INTENSITY FRONTIER ACCELERATORS : STATUS AND PROGRESS

Energy Technology Data Exchange (ETDEWEB)

Shiltsev, Vladimir [Fermilab

2016-11-15

The 2014 P5 report indicated the accelerator-based neutrino and rare decay physics research as a centrepiece of the US domestic HEP program at Fermilab. Operation, upgrade and development of the accelerators for the near- term and longer-term particle physics program at the Intensity Frontier face formidable challenges. Here we discuss key elements of the accelerator physics and technology R&D program toward future multi-MW proton accelerators and present its status and progress. INTENSITY FRONTIER ACCELERATORS

File list: Unc.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Unc.Lar.10.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX032124,SRX032123,SRX022335,SRX022334,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.10.AllAg.3rd_instar.bed ...

File list: Unc.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Unc.Lar.20.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX022335,SRX032124,SRX022334,SRX032123,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.20.AllAg.3rd_instar.bed ...

File list: Unc.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available Unc.Lar.05.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038031,SRX103802...9,SRX1038032,SRX1038030,SRX022335,SRX022334,SRX032124,SRX013058,SRX032123 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.05.AllAg.3rd_instar.bed ...

PERMUTATION-BASED POLYMORPHIC STEGO-WATERMARKS FOR PROGRAM CODES

Directory of Open Access Journals (Sweden)

Denys Samoilenko

2016-06-01

Full Text Available Purpose: One of the most actual trends in program code protection is code marking. The problem consists in creation of some digital “watermarks” which allow distinguishing different copies of the same program codes. Such marks could be useful for authority protection, for code copies numbering, for program propagation monitoring, for information security proposes in client-server communication processes. Methods: We used the methods of digital steganography adopted for program codes as text objects. The same-shape symbols method was transformed to same-semantic element method due to codes features which makes them different from ordinary texts. We use dynamic principle of marks forming making codes similar to be polymorphic. Results: We examined the combinatorial capacity of permutations possible in program codes. As a result it was shown that the set of 5-7 polymorphic variables is suitable for the most modern network applications. Marks creation and restoration algorithms where proposed and discussed. The main algorithm is based on full and partial permutations in variables names and its declaration order. Algorithm for partial permutation enumeration was optimized for calculation complexity. PHP code fragments which realize the algorithms were listed. Discussion: Methodic proposed in the work allows distinguishing of each client-server connection. In a case if a clone of some network resource was found the methodic could give information about included marks and thereby data on IP, date and time, authentication information of client copied the resource. Usage of polymorphic stego-watermarks should improve information security indexes in network communications.

The PASC-3 code system and the UNIPASC environment

International Nuclear Information System (INIS)

Pijlgroms, B.J.; Oppe, J.; Oudshoorn, H.

1991-08-01

A brief description is given of the PASC-3 (Petten-AMPX-SCALE) Reactor Physics code system and its associated UNIPASC work environment. The PASC-3 code system is used for criticality and reactor calculations and consists of a selection from the Oak Ridge National Laboratory AMPX-SCALE-3 code collection complemented with a number of additional codes and nuclear data bases. The original codes have been adapted to run under the UNIX operating system. The recommended nuclear data base is a complete 219 group cross section library derived from JEF-1 of which some benchmark results are presented. By the addition of the UNIPASC work environment the usage of the code system is greatly simplified, Complex chains of programs can easily be coupled together to form a single job. In addition, the model parameters can be represented by variables instead of literal values which enhances the readability and may improve the integrity of the code inputs. (author). 8 refs.; 6 figs.; 1 tab

Summary of findings of the R&D committee

Energy Technology Data Exchange (ETDEWEB)

Kenley, C.R. [Lockheed Martin Idaho Technologies, Idaho Falls (United States); Kokenge, B.R. [BRK Associates Inc., Farmersville, OH (United States)

1996-05-01

In March 1995, the Department of Energy`s (DOE) Nuclear Materials Stabilization Task Group (NMST) chartered a committee to formulate a research and development (R&D) plan in response to Sub-recommendation (2) of Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-1. The NMSTG was established as an organizational unit operating under the auspices of the DOE Office of the Environmental Management. As a result of its efforts, the Research Committee concluded that, in general, the technology needs for stabilizing 94-1 nuclear materials are being adequately met by existing or planned DOE programs. At the same time, the committee, in the form of recommendations, noted specific R&D program areas that should be addressed by the NMSTG. These recommendations are documented in the R&D plan and formulated based on: (1) existing {open_quotes}gaps{close_quotes} in DOE`s R&D stabilization program, (2) the relative maturity of various technologies, and (3) other important R&D program issues that, in the judgement of the committee, should be addressed by the NMSTG. A systems engineering approach, derived form the aerospace industry, was applied to the various stabilization technologies to assess their relative maturity and availability for use in treating 94-1 nuclear materials.

Progress of IRSN R&D on ITER Safety Assessment

Science.gov (United States)

Van Dorsselaere, J. P.; Perrault, D.; Barrachin, M.; Bentaib, A.; Gensdarmes, F.; Haeck, W.; Pouvreau, S.; Salat, E.; Seropian, C.; Vendel, J.

2012-08-01

The French "Institut de Radioprotection et de Sûreté Nucléaire" (IRSN), in support to the French "Autorité de Sûreté Nucléaire", is analysing the safety of ITER fusion installation on the basis of the ITER operator's safety file. IRSN set up a multi-year R&D program in 2007 to support this safety assessment process. Priority has been given to four technical issues and the main outcomes of the work done in 2010 and 2011 are summarized in this paper: for simulation of accident scenarios in the vacuum vessel, adaptation of the ASTEC system code; for risk of explosion of gas-dust mixtures in the vacuum vessel, adaptation of the TONUS-CFD code for gas distribution, development of DUST code for dust transport, and preparation of IRSN experiments on gas inerting, dust mobilization, and hydrogen-dust mixtures explosion; for evaluation of the efficiency of the detritiation systems, thermo-chemical calculations of tritium speciation during transport in the gas phase and preparation of future experiments to evaluate the most influent factors on detritiation; for material neutron activation, adaptation of the VESTA Monte Carlo depletion code. The first results of these tasks have been used in 2011 for the analysis of the ITER safety file. In the near future, this R&D global programme may be reoriented to account for the feedback of the latter analysis or for new knowledge.

Implementation and testing of the CFDS-FLOW3D code

International Nuclear Information System (INIS)

Smith, B.L.

1994-03-01

FLOW3D is a multi-purpose, transient fluid dynamics and heat transfer code developed by Computational Fluid Dynamics Services (CFDS), a branch of AEA Technology, based at Harwell. The code is supplied with a SUN-based operating environment consisting of an interactive grid generator SOPHIA and a post-processor JASPER for graphical display of results. Both SOPHIA and JASPER are extensions of the support software originally written for the ASTEC code, also promoted by CFDS. The latest release of FLOW3D contains well-tested turbulence and combustion models and, in a less-developed form, a multi-phase modelling potential. This document describes briefly the modelling capabilities of FLOW3D (Release 3.2) and outlines implementation procedures for the VAX, CRAY and CONVEX computer systems. Additional remarks are made concerning the in-house support programs which have been specially written in order to adapt existing ASTEC input data for use with FLOW3D; these programs operate within a VAX-VMS environment. Three sample calculations have been performed and results compared with those obtained previously using the ASTEC code, and checked against other available data, where appropriate. (author) 35 figs., 3 tabs., 42 refs

3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences

CERN Document Server

Dinh, Tao; Nguyen, Ngoc

2015-01-01

This proceedings set contains 85 selected full papers presented at the 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences - MCO 2015, held on May 11–13, 2015 at Lorraine University, France. The present part I of the 2 volume set includes articles devoted to Combinatorial optimization and applications, DC programming and DCA: thirty years of Developments, Dynamic Optimization, Modelling and Optimization in financial engineering, Multiobjective programming, Numerical Optimization, Spline Approximation and Optimization, as well as Variational Principles and Applications

International Code Assessment and Applications Program: Annual report

International Nuclear Information System (INIS)

Ting, P.; Hanson, R.; Jenks, R.

1987-03-01

This is the first annual report of the International Code Assessment and Applications Program (ICAP). The ICAP was organized by the Office of Nuclear Regulatory Research, United States Nuclear Regulatory Commission (USNRC) in 1985. The ICAP is an international cooperative reactor safety research program planned to continue over a period of approximately five years. To date, eleven European and Asian countries/organizations have joined the program through bilateral agreements with the USNRC. Seven proposed agreements are currently under negotiation. The primary mission of the ICAP is to provide independent assessment of the three major advanced computer codes (RELAP5, TRAC-PWR, and TRAC-BWR) developed by the USNRC. However, program activities can be expected to enhance the assessment process throughout member countries. The codes were developed to calculate the reactor plant response to transients and loss-of-coolant accidents. Accurate prediction of normal and abnormal plant response using the codes enhances procedures and regulations used for the safe operation of the plant and also provides technical basis for assessing the safety margin of future reactor plant designs. The ICAP is providing required assessment data that will contribute to quantification of the code uncertainty for each code. The first annual report is devoted to coverage of program activities and accomplishments during the period between April 1985 and March 1987

Main results on pilot operation during 5 years of the 3rd generation fuel in VVER-440 reactors of Kola NPP

International Nuclear Information System (INIS)

Saprykin, V.; Sumarokov, M.; Gagarinskiy, A.; Sumarokova, A.; Adeev, V.

2015-01-01

In the report the results of comparison of main neutron-physical data of exploitation of nuclear fuel are presented for the average enrichment (on U - 235) of 4.87 for the 2nd and 3rd (12 piece) generations with the results of calculations by the complex of the programs KASKAD for 5 fuel loadings of Kola NPP Unit 4 with the reactor VVER- 440. The basic feature of fuel of the 3rd generation as compared with the 2nd is a presence of ribs of inflexibility at corners instead of cover of the fuel assembly and also the increased amount of uranium. The arrangement of fuel rods with different enrichment in fuel assemblies of the 2nd and 3rd generations is chosen identical for the convenient comparison of neutronic and thermohydraulic characteristics of the fuel of different generations. The fuel of 3rd generation was situated in the core symmetrically to the fuel of 2nd one

File list: InP.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Lar.50.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX287726,SRX331369...87917,SRX287921,SRX288023,SRX467107,SRX016172,SRX016173 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.50.AllAg.3rd_instar.bed ...

Transcriptional regulation of ABI3- and ABA-responsive genes including RD29B and RD29A in seeds, germinating embryos, and seedlings of Arabidopsis.

Science.gov (United States)

Nakashima, Kazuo; Fujita, Yasunari; Katsura, Koji; Maruyama, Kyonoshin; Narusaka, Yoshihiro; Seki, Motoaki; Shinozaki, Kazuo; Yamaguchi-Shinozaki, Kazuko

2006-01-01

ABA-responsive elements (ABREs) are cis-acting elements and basic leucine zipper (bZIP)-type ABRE-binding proteins (AREBs) are transcriptional activators that function in the expression of RD29B in vegetative tissue of Arabidopsis in response to abscisic acid (ABA) treatment. Dehydration-responsive elements (DREs) function as coupling elements of ABRE in the expression of RD29A in response to ABA. Expression analysis using abi3 and abi5 mutants showed that ABI3 and ABI5 play important roles in the expression of RD29B in seeds. Base-substitution analysis showed that two ABREs function strongly and one ABRE coupled with DRE functions weakly in the expression of RD29A in embryos. In a transient transactivation experiment, ABI3, ABI5 and AREB1 activated transcription of a GUS reporter gene driven by the RD29B promoter strongly but these proteins activated the transcription driven by the RD29A promoter weakly. In 35S::ABI3 Arabidopsis plants, the expression of RD29B was up-regulated strongly, but that of RD29A was up-regulated weakly. These results indicate that the expression of RD29B having ABREs in the promoter is up-regulated strongly by ABI3, whereas that of RD29A having one ABRE coupled with DREs in the promoter is up-regulated weakly by ABI3. We compared the expression of 7000 Arabidopsis genes in response to ABA treatment during germination and in the vegetative growth stage, and that in 35S::ABI3 plants using a full-length cDNA microarray. The expression of ABI3- and/or ABA-responsive genes and cis-elements in the promoters are discussed.

File list: InP.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Lar.20.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX467108,SRX287726...67103,SRX288024,SRX288023,SRX104976,SRX016172,SRX467107,SRX016173 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.20.AllAg.3rd_instar.bed ...

File list: InP.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Lar.10.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX016172,SRX016173...87701,SRX287922,SRX467104,SRX287918,SRX287718,SRX104976,SRX467107 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.10.AllAg.3rd_instar.bed ...

File list: InP.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Lar.05.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX016173,SRX288024...87921,SRX287718,SRX331401,SRX287658,SRX331366,SRX287906,SRX287678 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.05.AllAg.3rd_instar.bed ...

Using Food as a Tool to Teach Science to 3rd Grade Students in Appalachian Ohio

Science.gov (United States)

Duffrin, Melani W.; Hovland, Jana; Carraway-Stage, Virginia; McLeod, Sara; Duffrin, Christopher; Phillips, Sharon; Rivera, David; Saum, Diana; Johanson, George; Graham, Annette; Lee, Tammy; Bosse, Michael; Berryman, Darlene

2010-01-01

The Food, Math, and Science Teaching Enhancement Resource (FoodMASTER) Initiative is a compilation of programs aimed at using food as a tool to teach mathematics and science. In 2007 to 2008, a foods curriculum developed by professionals in nutrition and education was implemented in 10 3rd-grade classrooms in Appalachian Ohio; teachers in these…

3rd International Conference on Transcriptomics

OpenAIRE

John A Daniel

2017-01-01

Conference Series has been instrumental in conducting international Biochemistry meetings for seven years, and very excited to expand Europe, America and Asia Pacific continents. Previous meetings were held in major cities like Philadelphia, Orlando with success the meetings again scheduled in three continents. 3rd International Conference on Transcriptomics to be held during October 30 - November 01, 2017 at Bangkok, Thailand The Global Transcriptomics business sector to develop at a C...

Computer code qualification program for the Advanced CANDU Reactor

International Nuclear Information System (INIS)

Popov, N.K.; Wren, D.J.; Snell, V.G.; White, A.J.; Boczar, P.G.

2003-01-01

Atomic Energy of Canada Ltd (AECL) has developed and implemented a Software Quality Assurance program (SQA) to ensure that its analytical, scientific and design computer codes meet the required standards for software used in safety analyses. This paper provides an overview of the computer programs used in Advanced CANDU Reactor (ACR) safety analysis, and assessment of their applicability in the safety analyses of the ACR design. An outline of the incremental validation program, and an overview of the experimental program in support of the code validation are also presented. An outline of the SQA program used to qualify these computer codes is also briefly presented. To provide context to the differences in the SQA with respect to current CANDUs, the paper also provides an overview of the ACR design features that have an impact on the computer code qualification. (author)

The 3rd power unit roofing decontamination

International Nuclear Information System (INIS)

Samojlenko, Yu.N.; Golubev, V.V.

1989-01-01

The most features of the 3rd power unit (PU) roofing decontamination are described: 1) the most active materials were thrown into the 4th PU ruins before the Ukrytie construction completion; 2) the decontamination was fulfilled using remote-controlled mechanisms and manual devices (the main part). 6 figs.; 1 tab

3rd Semester and Master's Thesis Ideas

DEFF Research Database (Denmark)

Clausen, Johan

The following pages contain a list of project ideas proposed by the scientific staff at the department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalouge may form the basis for long and short candidate projects as well as regular 3rd...

VALIDATION OF FULL CORE GEOMETRY MODEL OF THE NODAL3 CODE IN THE PWR TRANSIENT BENCHMARK PROBLEMS

Directory of Open Access Journals (Sweden)

Tagor Malem Sembiring

2015-10-01

Full Text Available ABSTRACT VALIDATION OF FULL CORE GEOMETRY MODEL OF THE NODAL3 CODE IN THE PWR TRANSIENT BENCHMARK PROBLEMS. The coupled neutronic and thermal-hydraulic (T/H code, NODAL3 code, has been validated in some PWR static benchmark and the NEACRP PWR transient benchmark cases. However, the NODAL3 code have not yet validated in the transient benchmark cases of a control rod assembly (CR ejection at peripheral core using a full core geometry model, the C1 and C2 cases.  By this research work, the accuracy of the NODAL3 code for one CR ejection or the unsymmetrical group of CRs ejection case can be validated. The calculations by the NODAL3 code have been carried out by the adiabatic method (AM and the improved quasistatic method (IQS. All calculated transient parameters by the NODAL3 code were compared with the reference results by the PANTHER code. The maximum relative difference of 16% occurs in the calculated time of power maximum parameter by using the IQS method, while the relative difference of the AM method is 4% for C2 case.  All calculation results by the NODAL3 code shows there is no systematic difference, it means the neutronic and T/H modules are adopted in the code are considered correct. Therefore, all calculation results by using the NODAL3 code are very good agreement with the reference results. Keywords: nodal method, coupled neutronic and thermal-hydraulic code, PWR, transient case, control rod ejection.   ABSTRAK VALIDASI MODEL GEOMETRI TERAS PENUH PAKET PROGRAM NODAL3 DALAM PROBLEM BENCHMARK GAYUT WAKTU PWR. Paket program kopel neutronik dan termohidraulika (T/H, NODAL3, telah divalidasi dengan beberapa kasus benchmark statis PWR dan kasus benchmark gayut waktu PWR NEACRP.  Akan tetapi, paket program NODAL3 belum divalidasi dalam kasus benchmark gayut waktu akibat penarikan sebuah perangkat batang kendali (CR di tepi teras menggunakan model geometri teras penuh, yaitu kasus C1 dan C2. Dengan penelitian ini, akurasi paket program

Modernization and restructuring of realistic thermal hydraulic system analysis code, RELAP5/MOD3.3.1.2

International Nuclear Information System (INIS)

Chung, Bub Dong; Lee, Won Jae; Jeong, Jae Jun; Ha, Kwi Seok

1998-01-01

The code architecture entails the programming language and the code database. Various recent programming languages such as C, C ++ , Fortran 90, were considered as the candidate language for the modernization of RELAP5/MOD3.2.1.2. Among them, Fortran 90 was selected as a basic programming laguage for the modernization and restructuring of the code. Most of header file ( * .h) and equivalenced variables in RELAP5 have been replaced with members in the MODULE, which greatly enhance the code maintenance and readability. The FTB package is used for the dynamic memory management (DMM) of RELAP5. Although FTB DMM features are very successful, the use of FTB has been the obstacle in the maintenance of the code. It is difficult to understand and change the coding, and it requires a significant effort to find out index errors in large memory pools. With new features introduced in Fortran 90, it is possible to slove dynamic allocation problems within the standard features in an elegant, clear safe way. Each of FTB data blocks can be replaced by the suitably organized derived variables in MODULE and the standard DMM scheme. This DMM scheme provides the code flexibility which can save the memory requirements depending on the problem sizes without a extensive use of the complex FTB package. The current user's interface of the RELAP5 consists of a set of input file, output file, and restart/plot file. Many users complain that this interface is not user friendly. It was mainly caused by the text-oriented programming, namly console programming during the past many years. Now, windows programming has become popular in most areas of software development. Using this windows programming technique, the user friend freatures can be implemented. The Visual Fortran Quick Win run-time library helps to turn graphics programs into simple Windows applications. RELAP5 code has been re-compiled with the Quick Win feature, and the mask for user's dialog and graphical x-y plot were designed. This

On the linear programming bound for linear Lee codes.

Science.gov (United States)

Astola, Helena; Tabus, Ioan

2016-01-01

Based on an invariance-type property of the Lee-compositions of a linear Lee code, additional equality constraints can be introduced to the linear programming problem of linear Lee codes. In this paper, we formulate this property in terms of an action of the multiplicative group of the field [Formula: see text] on the set of Lee-compositions. We show some useful properties of certain sums of Lee-numbers, which are the eigenvalues of the Lee association scheme, appearing in the linear programming problem of linear Lee codes. Using the additional equality constraints, we formulate the linear programming problem of linear Lee codes in a very compact form, leading to a fast execution, which allows to efficiently compute the bounds for large parameter values of the linear codes.

Generic detection of poleroviruses using an RT-PCR assay targeting the RdRp coding sequence.

Science.gov (United States)

Lotos, Leonidas; Efthimiou, Konstantinos; Maliogka, Varvara I; Katis, Nikolaos I

2014-03-01

In this study a two-step RT-PCR assay was developed for the generic detection of poleroviruses. The RdRp coding region was selected as the primers' target, since it differs significantly from that of other members in the family Luteoviridae and its sequence can be more informative than other regions in the viral genome. Species specific RT-PCR assays targeting the same region were also developed for the detection of the six most widespread poleroviral species (Beet mild yellowing virus, Beet western yellows virus, Cucurbit aphid-borne virus, Carrot red leaf virus, Potato leafroll virus and Turnip yellows virus) in Greece and the collection of isolates. These isolates along with other characterized ones were used for the evaluation of the generic PCR's detection range. The developed assay efficiently amplified a 593bp RdRp fragment from 46 isolates of 10 different Polerovirus species. Phylogenetic analysis using the generic PCR's amplicon sequence showed that although it cannot accurately infer evolutionary relationships within the genus it can differentiate poleroviruses at the species level. Overall, the described generic assay could be applied for the reliable detection of Polerovirus infections and, in combination with the specific PCRs, for the identification of new and uncharacterized species in the genus. Copyright © 2013 Elsevier B.V. All rights reserved.

Generic programming for deterministic neutron transport codes

International Nuclear Information System (INIS)

Plagne, L.; Poncot, A.

2005-01-01

This paper discusses the implementation of neutron transport codes via generic programming techniques. Two different Boltzmann equation approximations have been implemented, namely the Sn and SPn methods. This implementation experiment shows that generic programming allows us to improve maintainability and readability of source codes with no performance penalties compared to classical approaches. In the present implementation, matrices and vectors as well as linear algebra algorithms are treated separately from the rest of source code and gathered in a tool library called 'Generic Linear Algebra Solver System' (GLASS). Such a code architecture, based on a linear algebra library, allows us to separate the three different scientific fields involved in transport codes design: numerical analysis, reactor physics and computer science. Our library handles matrices with optional storage policies and thus applies both to Sn code, where the matrix elements are computed on the fly, and to SPn code where stored matrices are used. Thus, using GLASS allows us to share a large fraction of source code between Sn and SPn implementations. Moreover, the GLASS high level of abstraction allows the writing of numerical algorithms in a form which is very close to their textbook descriptions. Hence the GLASS algorithms collection, disconnected from computer science considerations (e.g. storage policy), is very easy to read, to maintain and to extend. (authors)

3rd International Conference on Ecosystem Assessment Management

CERN Document Server

Ma, Sheng-Quan; Cao, Hu-hua; Ecosystem Assessment and Fuzzy Systems Management

2014-01-01

“Ecosystem Assessment and Fuzzy Systems Management” is the edited outcome of the 3rd International Conference on Ecosystem Assessment Management (ICEAM) and the Workshop on the Construction of an Early Warning Platform for Eco-tourism (WCEWPE) in Hainan on May 5-12, 2013, Haikou, China. The 3rd ICEAM and the WCEWPE, built on the success of previous conferences, are major Symposiums for scientists, engineers and logistic management researchers presenting their the latest achievements, developments and applications in all areas of Ecosystem Assessment Management, Early Warning Platform for Eco-tourism and fuzziology. It aims to strengthen relations between industry research laboratories and universities, and to create a primary symposium for world scientists. The book, containing 47 papers, is divided into five parts: “Ecosystem Assessment, Management and Information”; “Intelligent Algorithm, Fuzzy Optimization and Engineering Application”; “Spatial Data Analysis and Intelligent Information Proces...

International Training Program in Support of Safety Analysis: 3D S.UN.COP-Scaling, Uncertainty and 3D Thermal-Hydraulics/Neutron-Kinetics Coupled Codes Seminars

International Nuclear Information System (INIS)

Petruzzi, Alessandro; D'Auria, Francesco; Bajs, Tomislav; Reventos, Francesc

2006-01-01

Thermal-hydraulic system computer codes are extensively used worldwide for analysis of nuclear facilities by utilities, regulatory bodies, nuclear power plant designers and vendors, nuclear fuel companies, research organizations, consulting companies, and technical support organizations. The computer code user represents a source of uncertainty that can influence the results of system code calculations. This influence is commonly known as the 'user effect' and stems from the limitations embedded in the codes as well as from the limited capability of the analysts to use the codes. Code user training and qualification is an effective means for reducing the variation of results caused by the application of the codes by different users. This paper describes a systematic approach to training code users who, upon completion of the training, should be able to perform calculations making the best possible use of the capabilities of best estimate codes. In other words, the program aims at contributing towards solving the problem of user effect. The 3D S.UN.COP (Scaling, Uncertainty and 3D COuPled code calculations) seminars have been organized as follow-up of the proposal to IAEA for the Permanent Training Course for System Code Users [1]. Five seminars have been held at University of Pisa (2003, 2004), at The Pennsylvania State University (2004), at University of Zagreb (2005) and at the School of Industrial Engineering of Barcelona (2006). It was recognized that such courses represented both a source of continuing education for current code users and a mean for current code users to enter the formal training structure of a proposed 'permanent' stepwise approach to user training. The 3D S.UN.COP 2006 was successfully held with the attendance of 33 participants coming from 18 countries and 28 different institutions (universities, vendors, national laboratories and regulatory bodies). More than 30 scientists (coming from 13 countries and 23 different institutions) were

3rd Interplanetary Network Gamma-Ray Burst Website

Science.gov (United States)

Hurley, Kevin

1998-05-01

We announce the opening of the 3rd Interplanetary Network web site at http://ssl.berkeley.edu/ipn3/index.html This site presently has four parts: 1. A bibliography of over 3000 publications on gamma-ray bursts, 2. IPN data on all bursts triangulated up to February 1998, 3. A master list showing which spacecraft observed which bursts, 4. Preliminary IPN data on the latest bursts observed.

3rd annual biomass energy systems conference

Energy Technology Data Exchange (ETDEWEB)

1979-10-01

The main objectives of the 3rd Annual Biomass Energy Systems Conference were (1) to review the latest research findings in the clean fuels from biomass field, (2) to summarize the present engineering and economic status of Biomass Energy Systems, (3) to encourage interaction and information exchange among people working or interested in the field, and (4) to identify and discuss existing problems relating to ongoing research and explore opportunities for future research. Abstracts for each paper presented were edited separately. (DC)

Verification of RESRAD-build computer code, version 3.1

International Nuclear Information System (INIS)

2003-01-01

for the review and any actions that were taken when these items were missing are documented in Section 5 of this report. The availability and use of user experience were limited to extensive experience in performing RESRAD-BUILD calculations by the verification project manager and by participation in the RESRAD-BUILD workshop offered by the code developers on May 11, 2001. The level of a posteriori verification that was implemented is defined in Sections 2 through 4 of this report. In general, a rigorous verification review plan addresses program requirements, design, coding, documentation, test coverage, and evaluation of test results. The scope of the RESRAD-BUILD verification is to focus primarily on program requirements, documentation, testing and evaluation. Detailed program design and source code review would be warranted only in those cases when the evaluation of test results and user experience revealed possible problems in these areas. The verification tasks were conducted in three parts and were applied to version 3.1 of the RESRAD-BUILD code and the final version of the user.s manual, issued in November 2001 (Yu (and others) 2001). These parts include the verification of the deterministic models used in RESRAD-BUILD (Section 2), the verification of the uncertainty analysis model included in RESRAD-BUILD (Section 3), and recommendations for improvement of the RESRAD-BUILD user interface, including evaluations of the user's manual, code design, and calculation methodology (Section 4). Any verification issues that were identified were promptly communicated to the RESRAD-BUILD development team, in particular those that arose from the database and parameter verification tasks. This allowed the developers to start implementing necessary database or coding changes well before this final report was issued

Nevada Administrative Code for Special Education Programs.

Science.gov (United States)

Nevada State Dept. of Education, Carson City. Special Education Branch.

This document presents excerpts from Chapter 388 of the Nevada Administrative Code, which concerns definitions, eligibility, and programs for students who are disabled or gifted/talented. The first section gathers together 36 relevant definitions from the Code for such concepts as "adaptive behavior,""autism,""gifted and…

Exercises in statistics for HA & HA(dat.) & BSc(B), 3rd semester

DEFF Research Database (Denmark)

The booklet contains excercises to be used for the tutorials related to the 3rd semester course in statistics on the bachelors progarmme at the Aarhus School of Business.......The booklet contains excercises to be used for the tutorials related to the 3rd semester course in statistics on the bachelors progarmme at the Aarhus School of Business....

Operation results of 3-rd generation nuclear fuel WWER-440 in initial period

International Nuclear Information System (INIS)

Adeev, V.; Panov, A.

2011-01-01

On unit 4 of Kola NPP trial operation of 3-rd generation's fuel began in 2010. Fuel assemblies of 3-rd generation (FA-3) have a number of design features that provide better operational characteristics. Concise description of a design and the basic advantages of fuel of 3-rd generation are described in articles. Increasing of efficiency of nuclear fuel usage will be achieved by reduction of the parasitic capture of thermal neutrons in constructional materials (weight of zirconium is reduced), optimization of uranium-water relation (increase in fuel elements step), increasing of uranium loading (usage of fuel pellets with increased diameter and without central hole in them). By results of trial operation mass transition to use of given type of assemblies in WWER-440 is possible. This report presents the basic outcomes of the trial operation, a brief survey of the obtained data. The basic characteristics of the reactor core with fuel of 3-rd generation are resulted in work. (authors)

Data calculation program for RELAP 5 code

International Nuclear Information System (INIS)

Silvestre, Larissa J.B.; Sabundjian, Gaiane

2015-01-01

As the criteria and requirements for a nuclear power plant are extremely rigid, computer programs for simulation and safety analysis are required for certifying and licensing a plant. Based on this scenario, some sophisticated computational tools have been used such as the Reactor Excursion and Leak Analysis Program (RELAP5), which is the most used code for the thermo-hydraulic analysis of accidents and transients in nuclear reactors. A major difficulty in the simulation using RELAP5 code is the amount of information required for the simulation of thermal-hydraulic accidents or transients. The preparation of the input data leads to a very large number of mathematical operations for calculating the geometry of the components. Therefore, a mathematical friendly preprocessor was developed in order to perform these calculations and prepare RELAP5 input data. The Visual Basic for Application (VBA) combined with Microsoft EXCEL demonstrated to be an efficient tool to perform a number of tasks in the development of the program. Due to the absence of necessary information about some RELAP5 components, this work aims to make improvements to the Mathematic Preprocessor for RELAP5 code (PREREL5). For the new version of the preprocessor, new screens of some components that were not programmed in the original version were designed; moreover, screens of pre-existing components were redesigned to improve the program. In addition, an English version was provided for the new version of the PREREL5. The new design of PREREL5 contributes for saving time and minimizing mistakes made by users of the RELAP5 code. The final version of this preprocessor will be applied to Angra 2. (author)

Data calculation program for RELAP 5 code

Energy Technology Data Exchange (ETDEWEB)

Silvestre, Larissa J.B.; Sabundjian, Gaiane, E-mail: larissajbs@usp.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

As the criteria and requirements for a nuclear power plant are extremely rigid, computer programs for simulation and safety analysis are required for certifying and licensing a plant. Based on this scenario, some sophisticated computational tools have been used such as the Reactor Excursion and Leak Analysis Program (RELAP5), which is the most used code for the thermo-hydraulic analysis of accidents and transients in nuclear reactors. A major difficulty in the simulation using RELAP5 code is the amount of information required for the simulation of thermal-hydraulic accidents or transients. The preparation of the input data leads to a very large number of mathematical operations for calculating the geometry of the components. Therefore, a mathematical friendly preprocessor was developed in order to perform these calculations and prepare RELAP5 input data. The Visual Basic for Application (VBA) combined with Microsoft EXCEL demonstrated to be an efficient tool to perform a number of tasks in the development of the program. Due to the absence of necessary information about some RELAP5 components, this work aims to make improvements to the Mathematic Preprocessor for RELAP5 code (PREREL5). For the new version of the preprocessor, new screens of some components that were not programmed in the original version were designed; moreover, screens of pre-existing components were redesigned to improve the program. In addition, an English version was provided for the new version of the PREREL5. The new design of PREREL5 contributes for saving time and minimizing mistakes made by users of the RELAP5 code. The final version of this preprocessor will be applied to Angra 2. (author)

Implementation of 3D models in the Monte Carlo code MCNP

International Nuclear Information System (INIS)

Lopes, Vivaldo; Millian, Felix M.; Guevara, Maria Victoria M.; Garcia, Fermin; Sena, Isaac; Menezes, Hugo

2009-01-01

On the area of numerical dosimetry Applied to medical physics, the scientific community focuses on the elaboration of new hybrids models based on 3D models. But different steps of the process of simulation with 3D models needed improvement and optimization in order to expedite the calculations and accuracy using this methodology. This project was developed with the aim of optimize the process of introduction of 3D models within the simulation code of radiation transport by Monte Carlo (MCNP). The fast implementation of these models on the simulation code allows the estimation of the dose deposited on the patient organs on a more personalized way, increasing the accuracy with this on the estimates and reducing the risks to health, caused by ionizing radiations. The introduction o these models within the MCNP was made through a input file, that was constructed through a sequence of images, bi-dimensional in the 3D model, generated using the program '3DSMAX', imported by the program 'TOMO M C' and thus, introduced as INPUT FILE of the MCNP code. (author)

"Hour of Code": Can It Change Students' Attitudes toward Programming?

Science.gov (United States)

Du, Jie; Wimmer, Hayden; Rada, Roy

2016-01-01

The Hour of Code is a one-hour introduction to computer science organized by Code.org, a non-profit dedicated to expanding participation in computer science. This study investigated the impact of the Hour of Code on students' attitudes towards computer programming and their knowledge of programming. A sample of undergraduate students from two…

Multitasking the code ARC3D. [for computational fluid dynamics

Science.gov (United States)

Barton, John T.; Hsiung, Christopher C.

1986-01-01

The CRAY multitasking system was developed in order to utilize all four processors and sharply reduce the wall clock run time. This paper describes the techniques used to modify the computational fluid dynamics code ARC3D for this run and analyzes the achieved speedup. The ARC3D code solves either the Euler or thin-layer N-S equations using an implicit approximate factorization scheme. Results indicate that multitask processing can be used to achieve wall clock speedup factors of over three times, depending on the nature of the program code being used. Multitasking appears to be particularly advantageous for large-memory problems running on multiple CPU computers.

FLOOD 3 code conversion from Apollo to HP

Energy Technology Data Exchange (ETDEWEB)

Lee, Hae Cho [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-01-01

FLOOD3 is a Fortran program used to analyze LOCA Reflood and Post Reflood transients for purpose of mechanistically generating containment sizing mass/energy source terms. The reflood time frame starts when safety injection water first enters the bottom of the core, following the initial LOCA blowdown phase, and the ends when liquid level in the core is high enough to quench the core. The post reflood phase starts at the end of reflood phase and lasts until the end of LOCA transient period. Longterm core cooling is initiated following post reflood phase. FLOOD3 code dose not contain separate capability for longterm cooling analysis. This report firstly describes detailed work carried out for installation of FLOOD3 on Apollo DN10000 and code validation results after installation. Secondly, A series of work is also describes in relation to installation of FLOOD3 on HP 9000/700 series as well as relevant code validation results. Attached is a report on software verification and validation results. 7 refs. (Author) .new.

FLOOD 3 code conversion from Apollo to HP

International Nuclear Information System (INIS)

Lee, Hae Cho

1996-01-01

FLOOD3 is a Fortran program used to analyze LOCA Reflood and Post Reflood transients for purpose of mechanistically generating containment sizing mass/energy source terms. The reflood time frame starts when safety injection water first enters the bottom of the core, following the initial LOCA blowdown phase, and the ends when liquid level in the core is high enough to quench the core. The post reflood phase starts at the end of reflood phase and lasts until the end of LOCA transient period. Longterm core cooling is initiated following post reflood phase. FLOOD3 code dose not contain separate capability for longterm cooling analysis. This report firstly describes detailed work carried out for installation of FLOOD3 on Apollo DN10000 and code validation results after installation. Secondly, A series of work is also describes in relation to installation of FLOOD3 on HP 9000/700 series as well as relevant code validation results. Attached is a report on software verification and validation results. 7 refs. (Author) .new

International training program in support of safety analysis. 3D S.UN.COP-scaling uncertainty and 3D thermal-hydraulics/neutron-kinetics coupled codes seminars

International Nuclear Information System (INIS)

Petruzzi, Alessandro; D'Auria, Francesco; Bajs, Tomislav; Reventos, Francesc; Hassan, Yassin

2007-01-01

Thermal-hydraulic system computer codes are extensively used worldwide for analysis of nuclear facilities by utilities, regulatory bodies, nuclear power plant designers and vendors, nuclear fuel companies, research organizations, consulting companies, and technical support organizations. The computer code user represents a source of uncertainty that can influence the results of system code calculations. This influence is commonly known as the user effect' and stems from the limitations embedded in the codes as well as from the limited capability of the analysis to use the codes. Code user training and qualification is an effective means for reducing the variation of results caused by the application of the codes by different users. This paper describes a systematic approach to training code users who, upon completion of the training, should be able to perform calculations making the best possible use of the capabilities of best estimate codes. In other words, the program aims at contributing towards solving the problem of user effect. The 3D S.UN.COP (Scaling, Uncertainty and 3D COuPled code calculations) seminars have been organized as follow-up of the proposal to IAEA for the Permanent Training Course for System Code Users. Six seminars have been held at University of Pisa (2003, 2004), at The Pennsylvania State University (2004), at University of Zagreb (2005), at the School of Industrial Engineering of Barcelona (January-February 2006) and in Buenos Aires, Argentina (October 2006), being this last one requested by ARN (Autoridad Regulatoria Nuclear), NA-SA (Nucleoelectrica Argentina S.A) and CNEA (Comision Nacional de Energia Atomica). It was recognized that such courses represented both a source of continuing education for current code users and a mean for current code users to enter the formal training structure of a proposed 'permanent' stepwise approach to user training. The 3D S.UN.COP 2006 in Barcelona was successfully held with the attendance of 33

Interoperable domain-specific languages families for code generation

Czech Academy of Sciences Publication Activity Database

Malohlava, M.; Plášil, F.; Bureš, Tomáš; Hnětynka, P.

2013-01-01

Roč. 43, č. 5 (2013), s. 479-499 ISSN 0038-0644 R&D Projects: GA ČR GD201/09/H057 EU Projects: European Commission(XE) ASCENS 257414 Grant - others:GA AV ČR(CZ) GAP103/11/1489 Program:FP7 Institutional research plan: CEZ:AV0Z10300504 Keywords : code generation * domain specific languages * models reuse * extensible languages * specification * program synthesis Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.148, year: 2013

The operation of a Research and Development (R&D) program and its significance for practice change in community pharmacy.

Science.gov (United States)

Hermansyah, Andi; Sainsbury, Erica; Krass, Ines

2017-01-01

Community pharmacy practice in Australia is changing and Research and Development (R&D) in community pharmacy plays an important role in contributing to the changes. A range of Cognitive Pharmacy Services (CPS) were developed from R&D programs, yet their implementation has been minimal indicating slow practice change within community pharmacy. Given the vital role of R&D, little is known about the operation and the extent to which it has been effective in supporting practice change in community pharmacy. In depth, semi-structured interviews were conducted with 27 key stakeholders in the pharmacy and healthcare system in Australia. All interviews were audio-recorded, transcribed ad verbatim and analysed using an inductive approach. Participants perceived that the R&D program has played an important role in the advent of CPS. Furthermore, they considered that evidence generated by the R&D projects is a critical influence on policy formulation, funding and implementation of CPS into practice. However, policy decisions and subsequent implementation are also influenced by other factors associated with context and facilitation which in turn foster or inhibit effective Knowledge Translation (KT) in the community pharmacy sector. While R&D programs have been viewed as essential for supporting changes in community pharmacy practice through development and funding of CPS, the overall impact has been small, as contemporary practice continues to be predominantly a dispensing model. Given the complexity and dynamic nature of the community pharmacy system, stakeholders must take into account the inter-relationship between context, evidence and facilitation for successful KT in community pharmacy practice.

The INFN-FBK pixel R&D program for HL-LHC

Science.gov (United States)

Meschini, M.; Dalla Betta, G. F.; Boscardin, M.; Calderini, G.; Darbo, G.; Giacomini, G.; Messineo, A.; Ronchin, S.

2016-09-01

We report on the ATLAS and CMS joint research activity, which is aiming at the development of new, thin silicon pixel detectors for the Large Hadron Collider Phase-2 detector upgrades. This R&D is performed under special agreement between Istituto Nazionale di Fisica Nucleare and FBK foundation (Trento, Italy). New generations of 3D and planar pixel sensors with active edges are being developed in the R&D project, and will be fabricated at FBK. A first planar pixel batch, which was produced by the end of year 2014, will be described in this paper. First clean room measurement results on planar sensors obtained before and after neutron irradiation will be presented.

The INFN-FBK pixel R&D program for HL-LHC

International Nuclear Information System (INIS)

Meschini, M.; Dalla Betta, G.F.; Boscardin, M.; Calderini, G.; Darbo, G.; Giacomini, G.; Messineo, A.; Ronchin, S.

2016-01-01

We report on the ATLAS and CMS joint research activity, which is aiming at the development of new, thin silicon pixel detectors for the Large Hadron Collider Phase-2 detector upgrades. This R&D is performed under special agreement between Istituto Nazionale di Fisica Nucleare and FBK foundation (Trento, Italy). New generations of 3D and planar pixel sensors with active edges are being developed in the R&D project, and will be fabricated at FBK. A first planar pixel batch, which was produced by the end of year 2014, will be described in this paper. First clean room measurement results on planar sensors obtained before and after neutron irradiation will be presented.

Book of abstracts of the 3rd International conference and the 3rd International School for young scientists Interaction of hydrogen isotopes with structural materials. IHISM-07

International Nuclear Information System (INIS)

2007-01-01

The book involves abstracts of presentations at the 3rd International Conference and the 3rd International School for Young Scientists Interaction of Hydrogen Isotopes with Structural Materials (IHISM-07). The activities of Russian and foreign scientific centers associated with the use of hydrogen isotopes in power engineering, national economy and basic research are considered. The presentations cover the following areas: kinetics and interaction between hydrogen isotopes and solids including effects of radiogenic helium accumulation, hydrides and hydride transformations; structural transformations and mechanical properties; equipment and research techniques [ru

Magnet Free Generators - 3rd Generation Wind Turbine Generators

DEFF Research Database (Denmark)

Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

2013-01-01

This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A comp...

3rd MeTrApp Conference

CERN Document Server

Lovasz, Erwin-Christian; Hüsing, Mathias

2015-01-01

This volume deals with topics such as mechanism and machine design, biomechanics and medical engineering, gears, mechanical transmissions, mechatronics, computational and experimental methods, dynamics of mechanisms and machines, micromechanisms and microactuators, and history of mechanisms and transmissions. Following MeTrApp 2011 and 2013, held under the auspices of the IFToMM, these proceedings of the 3rd Conference on Mechanisms, Transmissions and Applications offer a platform for original research presentations for researchers, scientists, industry experts and students in the fields of mechanisms and transmissions with special emphasis on industrial applications in order to stimulate the exchange of new and innovative ideas.

A Case for Dynamic Reverse-code Generation to Debug Non-deterministic Programs

Directory of Open Access Journals (Sweden)

Jooyong Yi

2013-09-01

Full Text Available Backtracking (i.e., reverse execution helps the user of a debugger to naturally think backwards along the execution path of a program, and thinking backwards makes it easy to locate the origin of a bug. So far backtracking has been implemented mostly by state saving or by checkpointing. These implementations, however, inherently do not scale. Meanwhile, a more recent backtracking method based on reverse-code generation seems promising because executing reverse code can restore the previous states of a program without state saving. In the literature, there can be found two methods that generate reverse code: (a static reverse-code generation that pre-generates reverse code through static analysis before starting a debugging session, and (b dynamic reverse-code generation that generates reverse code by applying dynamic analysis on the fly during a debugging session. In particular, we espoused the latter one in our previous work to accommodate non-determinism of a program caused by e.g., multi-threading. To demonstrate the usefulness of our dynamic reverse-code generation, this article presents a case study of various backtracking methods including ours. We compare the memory usage of various backtracking methods in a simple but nontrivial example, a bounded-buffer program. In the case of non-deterministic programs such as this bounded-buffer program, our dynamic reverse-code generation outperforms the existing backtracking methods in terms of memory efficiency.

FY2016 Advanced Batteries R&D Annual Progress Report - Part 3 of 5

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-08-31

The Advanced Batteries research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush. This report describes the progress made on the research and development projects funded by the Battery subprogram in 2016. This section covers the summaries of the Applied Batteries Research for Transportation Projects part 2.

Annual coded wire tag program (Washington) missing production groups : annual report 2000; ANNUAL

International Nuclear Information System (INIS)

Dammers, Wolf; Mills, Robin D.

2002-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded-wire Tag Program - Missing Production Groups for Columbia River Hatcheries'' project. The Washington Department of Fish and Wildlife (WDFW), Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time and to meet various measures of the Northwest Power Planning Council's (NWPPC) Fish and Wildlife Program. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries. Objective 1 for FY-00 was met with few modifications to the original FY-00 proposal. Under Objective 2, snouts containing coded-wire tags that were recovered during FY-00 were decoded. Under Objective 3, this report summarizes available recovery information through 2000 and includes detailed information for brood years 1989 to 1994 for chinook and 1995 to 1997 for coho

MARS 1.3 system analysis code coupling with CONTEMPT4/MOD5/PCCS containment analysis code using dynamic link library

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Lee, Won Jae

1998-01-01

The two independent codes, MARS 1.3 and CONTEMPT4/MOD5/PCCS, have been coupled using the method of dynamic-link-library (DLL) technique. Overall configuration of the code system is designed so that MARS will be a main driver program which use CONTEMPT as associated routines. Using Digital Visual Fortran compiler, DLL was generated from the CONTEMPT source code with the interfacing routine names and arguments. Coupling of MARS with CONTEMPT was realized by calling the DLL routines at the appropriate step in the MARS code. Verification of coupling was carried out for LBLOCA transient of a typical plant design. It was found that the DLL technique is much more convenient than the UNIX process control techniques and effective for Window operating system. Since DLL can be used by more than one application and an application program can use many DLLs simultaneously, this technique would enable the existing codes to use more broadly with linking others

MARS 1.3 system analysis code coupling with CONTEMPT4/MOD5/PCCS containment analysis code using dynamic link library

Energy Technology Data Exchange (ETDEWEB)

Chung, Bub Dong; Jeong, Jae Jun; Lee, Won Jae [KAERI, Taejon (Korea, Republic of)

1998-10-01

The two independent codes, MARS 1.3 and CONTEMPT4/MOD5/PCCS, have been coupled using the method of dynamic-link-library (DLL) technique. Overall configuration of the code system is designed so that MARS will be a main driver program which use CONTEMPT as associated routines. Using Digital Visual Fortran compiler, DLL was generated from the CONTEMPT source code with the interfacing routine names and arguments. Coupling of MARS with CONTEMPT was realized by calling the DLL routines at the appropriate step in the MARS code. Verification of coupling was carried out for LBLOCA transient of a typical plant design. It was found that the DLL technique is much more convenient than the UNIX process control techniques and effective for Window operating system. Since DLL can be used by more than one application and an application program can use many DLLs simultaneously, this technique would enable the existing codes to use more broadly with linking others.

International Code Centres Network. Summary Report of the 3rd Biennial Technical Meeting

International Nuclear Information System (INIS)

Chung, Hyun-Kyung

2013-07-01

This report summarizes the proceedings of the third Technical Meeting of the International Code Centres Network held on 6-8 May in 2013. Ten experts from seven member states and four IAEA staff members attended the three-day meeting held at the IAEA Headquarters in Vienna to discuss issues on uncertainty estimates of theoretical atomic and molecular data. The report includes discussions on data issues, meeting conclusions and recommendations for the IAEA Atomic and Molecular Data Unit. (author)

Proceedings of the 3rd Symposium on Laser Spectroscopy

International Nuclear Information System (INIS)

1995-11-01

This proceedings contains articles of the 3rd Symposium on Laser Spectroscopy. It was held on Nov 10-11, 1995 in Taejeon, Korea. The main topics are as follows: Laser Isotope, Laser Spectroscopy, Laser Fusion, Laser Applications and so on. (Yi, J. H.)

Validation of CATHARE 3D code against UPTF TRAM C3 transients

International Nuclear Information System (INIS)

Glantz, Tony; Freitas, Roberto

2007-01-01

Within the nuclear reactor safety analysis, one of the events that could potentially lead to a recriticality accident in case of a Small Break LOCA (SBLOCA) in a pressurized water reactor (PWR) is a boron dilution scenario followed by a coolant mixing transient. Some UPTF experiments can be interpreted as generic boron dilution experiments. In fact, the UPTF experiments were originally designed to conduct separate effects studies focused on multi-dimensional thermal hydraulic phenomena. But, in the case of experimental program TRAM, some studies are realized on the boron mixing: tests C3. Some of these tests have been used for the validation and assessment of the 3D module of CATHARE code. Results are very satisfying; CATHARE 3D code is able to reproduce correctly the main features of the UPTF TRAM C3 tests, the temperature mixing in the cold leg, the formation of a strong stratification in the upper downcomer, the perfect mixing temperature in the lower downcomer and the strong stratification in the lower plenum. These results are also compared with the CFX-5 and TRIO-U codes results on these tests. (author)

Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2012-04-01

This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

NGNP Composites R&D Technical Issues Study

Energy Technology Data Exchange (ETDEWEB)

AREVA Federal Services

2008-09-01

This study identifies potential applications and design requirements for ceramic materials (CMs) and ceramic composite materials (CCMs) in the NGNP hightemperature gas-cooled reactor (HTGR) primary circuit. Components anticipated for fabrication from non-graphite CMs and CCMs are identified along with recommended normal and off-normal operating conditions. The evaluation defines required dimensions and material properties of the candidate materials for normal operating conditions (NOC), anticipated transients, abnormal events, and design basis events. The report also identifies additional activities required for codifying the selected materials. The activities include ASTM Standard and ASME Code development and other work to support NRC licensing of the plant. Evaluation of the NGNP baseline design indicates components requiring either CMs or CCMs depend upon the reactor operating temperatures. For a reactor outlet temperature of 900 oC, four of the five evaluated components would benefit from either CMs or CCMs. Although some thermal and mechanical data exist for most of the candidate materials, they all need additional irradiation, thermal, and mechanical testing. The codification process must take into account the type of material and the geometry of components using either CMs or CCMs. The process requires close integration of the design and the research and development (R&D) program, which has already started by using preliminary control rod component designs as the basis for establishing specimen geometry and test conditions. The remaining time and budget for completing the R&D program need further assessment.

Coding efficiency of AVS 2.0 for CBAC and CABAC engines

Science.gov (United States)

Cui, Jing; Choi, Youngkyu; Chae, Soo-Ik

2015-12-01

In this paper we compare the coding efficiency of AVS 2.0[1] for engines of the Context-based Binary Arithmetic Coding (CBAC)[2] in the AVS 2.0 and the Context-Adaptive Binary Arithmetic Coder (CABAC)[3] in the HEVC[4]. For fair comparison, the CABAC is embedded in the reference code RD10.1 because the CBAC is in the HEVC in our previous work[5]. The rate estimation table is employed only for RDOQ in the RD code. To reduce the computation complexity of the video encoder, therefore we modified the RD code so that the rate estimation table is employed for all RDO decision. Furthermore, we also simplify the complexity of rate estimation table by reducing the bit depth of its fractional part to 2 from 8. The simulation result shows that the CABAC has the BD-rate loss of about 0.7% compared to the CBAC. It seems that the CBAC is a little more efficient than that the CABAC in the AVS 2.0.

3rd International Conference on Computer & Communication Technologies

CERN Document Server

Bhateja, Vikrant; Raju, K; Janakiramaiah, B

2017-01-01

The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

Chondromyxoid fibroma of distal 1/3 rd of fibula a rare tumour at rare ...

African Journals Online (AJOL)

Chondromyxoid fibromas are rare, benign tumours account for <1% of primary bone neoplasms. Most commonly affected in 2nd and 3rdof life. We report one such case of chondromyxoid fibroma in distal fibula of a 15-year-old girl. The patient was managed with lower 3rd fibulectomy and fibular turnoplasty from middle 3rd ...

Code Development and Analysis Program: developmental checkout of the BEACON/MOD2A code

International Nuclear Information System (INIS)

Ramsthaler, J.A.; Lime, J.F.; Sahota, M.S.

1978-12-01

A best-estimate transient containment code, BEACON, is being developed by EG and G Idaho, Inc. for the Nuclear Regulatory Commission's reactor safety research program. This is an advanced, two-dimensional fluid flow code designed to predict temperatures and pressures in a dry PWR containment during a hypothetical loss-of-coolant accident. The most recent version of the code, MOD2A, is presently in the final stages of production prior to being released to the National Energy Software Center. As part of the final code checkout, seven sample problems were selected to be run with BEACON/MOD2A

The Oil Security Metrics Model: A Tool for Evaluating the Prospective Oil Security Benefits of DOE's Energy Efficiency and Renewable Energy R&D Programs

Energy Technology Data Exchange (ETDEWEB)

Greene, David L [ORNL; Leiby, Paul Newsome [ORNL

2006-05-01

Energy technology R&D is a cornerstone of U.S. energy policy. Understanding the potential for energy technology R&D to solve the nation's energy problems is critical to formulating a successful R&D program. In light of this, the U.S. Congress requested the National Research Council (NRC) to undertake both retrospective and prospective assessments of the Department of Energy's (DOE's) Energy Efficiency and Fossil Energy Research programs (NRC, 2001; NRC, 2005). ("The Congress continued to express its interest in R&D benefits assessment by providing funds for the NRC to build on the retrospective methodology to develop a methodology for assessing prospective benefits." NRC, 2005, p. ES-2) In 2004, the NRC Committee on Prospective Benefits of DOE's Energy Efficiency and Fossil Energy R&D Programs published a report recommending a new framework and principles for prospective benefits assessment. The Committee explicitly deferred the issue of estimating security benefits to future work. Recognizing the need for a rigorous framework for assessing the energy security benefits of its R&D programs, the DOE's Office of Energy Efficiency and Renewable Energy (EERE) developed a framework and approach for defining energy security metrics for R&D programs to use in gauging the energy security benefits of their programs (Lee, 2005). This report describes methods for estimating the prospective oil security benefits of EERE's R&D programs that are consistent with the methodologies of the NRC (2005) Committee and that build on Lee's (2005) framework. Its objective is to define and implement a method that makes use of the NRC's typology of prospective benefits and methodological framework, satisfies the NRC's criteria for prospective benefits evaluation, and permits measurement of that portion of the prospective energy security benefits of EERE's R&D portfolio related to oil. While the Oil Security Metrics (OSM) methodology described

RELAP5-3D Code for Supercritical-Pressure Light-Water-Cooled Reactors

Energy Technology Data Exchange (ETDEWEB)

Riemke, Richard Allan; Davis, Cliff Bybee; Schultz, Richard Raphael

2003-04-01

The RELAP5-3D computer program has been improved for analysis of supercritical-pressure, light-water-cooled reactors. Several code modifications were implemented to correct code execution failures. Changes were made to the steam table generation, steam table interpolation, metastable states, interfacial heat transfer coefficients, and transport properties (viscosity and thermal conductivity). The code modifications now allow the code to run slow transients above the critical pressure as well as blowdown transients (modified Edwards pipe and modified existing pressurized water reactor model) that pass near the critical point.

A program for undergraduate research into the mechanisms of sensory coding and memory decay

Energy Technology Data Exchange (ETDEWEB)

Calin-Jageman, R J

2010-09-28

This is the final technical report for this DOE project, entitltled "A program for undergraduate research into the mechanisms of sensory coding and memory decay". The report summarizes progress on the three research aims: 1) to identify phyisological and genetic correlates of long-term habituation, 2) to understand mechanisms of olfactory coding, and 3) to foster a world-class undergraduate neuroscience program. Progress on the first aim has enabled comparison of learning-regulated transcripts across closely related learning paradigms and species, and results suggest that only a small core of transcripts serve truly general roles in long-term memory. Progress on the second aim has enabled testing of several mutant phenotypes for olfactory behaviors, and results show that responses are not fully consistent with the combinitoral coding hypothesis. Finally, 14 undergraduate students participated in this research, the neuroscience program attracted extramural funding, and we completed a successful summer program to enhance transitions for community-college students into 4-year colleges to persue STEM fields.

CITOPP, CITMOD, CITWI, Processing codes for CITATION Code

International Nuclear Information System (INIS)

Albarhoum, M.

2008-01-01

Description of program or function: CITOPP processes the output file of the CITATION 3-D diffusion code. The program can plot axial, radial and circumferential flux distributions (in cylindrical geometry) in addition to the multiplication factor convergence. The flux distributions can be drawn for each group specified by the program and visualized on the screen. CITMOD processes both the output and the input files of the CITATION 3-D diffusion code. CITMOD can visualize both axial, and radial-angular models of the reactor described by CITATION input/output files. CITWI processes the input file (CIT.INP) of CITATION 3-D diffusion code. CIT.INP is processed to deduce the dimensions of the cell whose cross sections can be representative of the homonym reactor component in section 008 of CIT.INP

Code OK3 - An upgraded version of OK2 with beam wobbling function

Science.gov (United States)

Ogoyski, A. I.; Kawata, S.; Popov, P. H.

2010-07-01

For computer simulations on heavy ion beam (HIB) irradiation onto a target with an arbitrary shape and structure in heavy ion fusion (HIF), the code OK2 was developed and presented in Computer Physics Communications 161 (2004). Code OK3 is an upgrade of OK2 including an important capability of wobbling beam illumination. The wobbling beam introduces a unique possibility for a smooth mechanism of inertial fusion target implosion, so that sufficient fusion energy is released to construct a fusion reactor in future. New version program summaryProgram title: OK3 Catalogue identifier: ADST_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADST_v3_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 221 517 No. of bytes in distributed program, including test data, etc.: 2 471 015 Distribution format: tar.gz Programming language: C++ Computer: PC (Pentium 4, 1 GHz or more recommended) Operating system: Windows or UNIX RAM: 2048 MBytes Classification: 19.7 Catalogue identifier of previous version: ADST_v2_0 Journal reference of previous version: Comput. Phys. Comm. 161 (2004) 143 Does the new version supersede the previous version?: Yes Nature of problem: In heavy ion fusion (HIF), ion cancer therapy, material processing, etc., a precise beam energy deposition is essentially important [1]. Codes OK1 and OK2 have been developed to simulate the heavy ion beam energy deposition in three-dimensional arbitrary shaped targets [2, 3]. Wobbling beam illumination is important to smooth the beam energy deposition nonuniformity in HIF, so that a uniform target implosion is realized and a sufficient fusion output energy is released. Solution method: OK3 code works on the base of OK1 and OK2 [2, 3]. The code simulates a multi-beam illumination on a target with arbitrary shape and

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Austregesilo, H.; Velkov, K. [GRS, Garching (Germany)] [and others

1997-07-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes.

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

International Nuclear Information System (INIS)

Langenbuch, S.; Austregesilo, H.; Velkov, K.

1997-01-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes

Code of Medical Ethics

Directory of Open Access Journals (Sweden)

. SZD-SZZ

2017-03-01

Full Text Available Te Code was approved on December 12, 1992, at the 3rd regular meeting of the General Assembly of the Medical Chamber of Slovenia and revised on April 24, 1997, at the 27th regular meeting of the General Assembly of the Medical Chamber of Slovenia. The Code was updated and harmonized with the Medical Association of Slovenia and approved on October 6, 2016, at the regular meeting of the General Assembly of the Medical Chamber of Slovenia.

Mechanical design and engineering of the 3.9 GHZ, 3rd harmonic SRF system at Fermilab

International Nuclear Information System (INIS)

Don Mitchell

2004-01-01

The mechanical development of the 3.9 GHz, 3rd Harmonic SRF System is summarized to include: the development of a full scale copper prototype cavity structure; the design of the niobium 3 cell and niobium 9 cell structures; the design of the helium vessel and cryostat; the HOM coupler design; and a preliminary look at the main coupler design. The manufacturing processes for forming, rolling, and e-beam welding the HOM coupler, cavity cells, and end tubes are also described. Due to the exotic materials and manufacturing processes used in this type of device, a cost estimate for the material and fabrication is provided. The 3rd harmonic design is organized via a web-based data management approach

Mechanical design and engineering of the 3.9 GHZ, 3rd harmonic SRF system at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Don Mitchell et al.

2004-08-05

The mechanical development of the 3.9 GHz, 3rd Harmonic SRF System is summarized to include: the development of a full scale copper prototype cavity structure; the design of the niobium 3 cell and niobium 9 cell structures; the design of the helium vessel and cryostat; the HOM coupler design; and a preliminary look at the main coupler design. The manufacturing processes for forming, rolling, and e-beam welding the HOM coupler, cavity cells, and end tubes are also described. Due to the exotic materials and manufacturing processes used in this type of device, a cost estimate for the material and fabrication is provided. The 3rd harmonic design is organized via a web-based data management approach.

Low Complexity List Decoding for Polar Codes with Multiple CRC Codes

Directory of Open Access Journals (Sweden)

Jong-Hwan Kim

2017-04-01

Full Text Available Polar codes are the first family of error correcting codes that provably achieve the capacity of symmetric binary-input discrete memoryless channels with low complexity. Since the development of polar codes, there have been many studies to improve their finite-length performance. As a result, polar codes are now adopted as a channel code for the control channel of 5G new radio of the 3rd generation partnership project. However, the decoder implementation is one of the big practical problems and low complexity decoding has been studied. This paper addresses a low complexity successive cancellation list decoding for polar codes utilizing multiple cyclic redundancy check (CRC codes. While some research uses multiple CRC codes to reduce memory and time complexity, we consider the operational complexity of decoding, and reduce it by optimizing CRC positions in combination with a modified decoding operation. Resultingly, the proposed scheme obtains not only complexity reduction from early stopping of decoding, but also additional reduction from the reduced number of decoding paths.

Description of computer code PRINS, Program for Interpreting Gamma Spectra, developed at ENEA

Energy Technology Data Exchange (ETDEWEB)

Borsari, R. [ENEA, Centro Ricerche `E. Clementel`, Bologna (Italy). Dip. Energia

1995-11-01

The computer code PRINS, program for interpreting gamma Spectra, has been developed in collaboration with CENG/SECC (Centre Etude Nucleaire Grenoble / Service Etude Comportement du Combustible). Later it has been updated and improved at ENEA. Properties of the PRINS code are: (1) A powerful algorithm to locate the peaks; (2) An accurate evaluation of the errors; (3) Possibility of an automatic channels-energy calibration.

Description of computer code PRINS, Program for Interpreting Gamma Spectra, developed at ENEA

International Nuclear Information System (INIS)

Borsari, R.

1995-12-01

The computer code PRINS, PRogram for INterpreting gamma Spectra, has been developed in collaboration with CENG/SECC (Centre Etude Nucleaire Grenoble / Service Etude Comportement du Combustible). Later it has been updated and improved at ENEA. Properties of the PRINS code are: I) A powerful algorithm to locate the peaks; 2) An accurate evaluation of the errors; 3) Possibility of an automatic channels-energy calibration

Guidelines and procedures for the International Code Assessment and Applications Program

International Nuclear Information System (INIS)

1987-04-01

This document presents the guidelines and procedures by which the International Code Assessment and Applications Program (ICAP) will be conducted. The document summarizes the management structure of the program and the relationships between and responsibilities of the United States Nuclear Regulatory Commission (USNRC) and the international participants. The procedures for code maintenance and necessary documentation are described. Guidelines for the performance and documentation of code assessment studies are presented. An overview of an effort to quantify code uncertainty, which the ICAP supports, is included

3rd Semester and Master’s Thesis Ideas 2011

DEFF Research Database (Denmark)

The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...

3rd Semester and Master’s Thesis Ideas 2013

DEFF Research Database (Denmark)

The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...

3rd Semester and Master’s Thesis Ideas 2012

DEFF Research Database (Denmark)

Clausen, Johan

The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...

Emergency Doses (ED) - Revision 3: A calculator code for environmental dose computations

International Nuclear Information System (INIS)

Rittmann, P.D.

1990-12-01

The calculator program ED (Emergency Doses) was developed from several HP-41CV calculator programs documented in the report Seven Health Physics Calculator Programs for the HP-41CV, RHO-HS-ST-5P (Rittman 1984). The program was developed to enable estimates of offsite impacts more rapidly and reliably than was possible with the software available for emergency response at that time. The ED - Revision 3, documented in this report, revises the inhalation dose model to match that of ICRP 30, and adds the simple estimates for air concentration downwind from a chemical release. In addition, the method for calculating the Pasquill dispersion parameters was revised to match the GENII code within the limitations of a hand-held calculator (e.g., plume rise and building wake effects are not included). The summary report generator for printed output, which had been present in the code from the original version, was eliminated in Revision 3 to make room for the dispersion model, the chemical release portion, and the methods of looping back to an input menu until there is no further no change. This program runs on the Hewlett-Packard programmable calculators known as the HP-41CV and the HP-41CX. The documentation for ED - Revision 3 includes a guide for users, sample problems, detailed verification tests and results, model descriptions, code description (with program listing), and independent peer review. This software is intended to be used by individuals with some training in the use of air transport models. There are some user inputs that require intelligent application of the model to the actual conditions of the accident. The results calculated using ED - Revision 3 are only correct to the extent allowed by the mathematical models. 9 refs., 36 tabs

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2012-04-01

The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

Interactive game programming with Python (CodeSkulptor)

OpenAIRE

Ajayi, Richard Olugbenga

2014-01-01

Over the years, several types of gaming platforms have been created to encourage a more organised and friendly atmosphere for game lovers in various works of life, culture, and environment. This thesis focuses on the concept of interactive programming using Python. It encourages the use of Python to create simple interactive games applications based on basic human concept and ideas. CodeSkulptor is a browser-based IDE programming environment and uses the Python programming language. O...

High explosive programmed burn in the FLAG code

Energy Technology Data Exchange (ETDEWEB)

Mandell, D.; Burton, D.; Lund, C.

1998-02-01

The models used to calculate the programmed burn high-explosive lighting times for two- and three-dimensions in the FLAG code are described. FLAG uses an unstructured polyhedra grid. The calculations were compared to exact solutions for a square in two dimensions and for a cube in three dimensions. The maximum error was 3.95 percent in two dimensions and 4.84 percent in three dimensions. The high explosive lighting time model described has the advantage that only one cell at a time needs to be considered.

The Effects of State R&D Tax Credits in Stimulating Private R&D Expenditure: A Cross-State Empirical Analysis

Science.gov (United States)

Wu, Yonghong

2005-01-01

This is a cross-state empirical study which examines the effects of state research and development (R&D) tax credits on private R&D expenditure in the states. Other explanatory variables include federal R&D subsidies, public services in higher education and R&D-targeted programs as well as other control variables. The statistical result shows that…

A Goal Programming R&D (Research and Development) Project Funding Model of the U.S. Army Strategic Defense Command Using the Analytic Hierarchy Process.

Science.gov (United States)

1987-09-01

A187 899 A GOAL PROGRANNIN R&D (RESEARCH AND DEVELOPMENT) 1/2 PROJECT FUNDING MODEL 0 (U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA S M ANDERSON SEP 87...PROGRAMMING R&D PROJECT FUNDING MODEL OF THE U.S. ARMY STRATEGIC DEFENSE COMMAND USING THE ANALYTIC HIERARCHY PROCESS by Steven M. Anderson September 1987...jACCESSION NO TITI E (Influde Securt ClauAIcatsrn) A Goal Programming R&D Project Funding Model of the U.S. Army Strategic Defense Command Using the

SIMULATE-3 K coupled code applications

Energy Technology Data Exchange (ETDEWEB)

Joensson, Christian [Studsvik Scandpower AB, Vaesteraas (Sweden); Grandi, Gerardo; Judd, Jerry [Studsvik Scandpower Inc., Idaho Falls, ID (United States)

2017-07-15

This paper describes the coupled code system TRACE/SIMULATE-3 K/VIPRE and the application of this code system to the OECD PWR Main Steam Line Break. A short description is given for the application of the coupled system to analyze DNBR and the flexibility the system creates for the user. This includes the possibility to compare and evaluate the result with the TRACE/SIMULATE-3K (S3K) coupled code, the S3K standalone code (core calculation) as well as performing single-channel calculations with S3K and VIPRE. This is the typical separate-effect-analyses required for advanced calculations in order to develop methodologies to be used for safety analyses in general. The models and methods of the code systems are presented. The outline represents the analysis approach starting with the coupled code system, reactor and core model calculation (TRACE/S3K). This is followed by a more detailed core evaluation (S3K standalone) and finally a very detailed thermal-hydraulic investigation of the hot pin condition (VIPRE).

CANDU Safety R&D Status, Challenges, and Prospects in Canada

Directory of Open Access Journals (Sweden)

W. Shen

2015-01-01

Full Text Available In Canada, safe operation of CANDU (CANada Deuterium Uranium; it is a registered trademark of Atomic Energy of Canada Limited reactors is supported by a full-scope program of nuclear safety research and development (R&D in key technical areas. Key nuclear R&D programs, facilities, and expertise are maintained in order to address the unique features of the CANDU as well as generic technology areas common to CANDU and LWR (light water reactor. This paper presents an overview of the CANDU safety R&D which includes background, drivers, current status, challenges, and future directions. This overview of the Canadian nuclear safety R&D programs includes those currently conducted by the COG (CANDU Owners Group, AECL (Atomic Energy of Canada Limited, Candu Energy Inc., and the CNSC (Canadian Nuclear Safety Commission and by universities via UNENE (University Network of Excellence in Nuclear Engineering sponsorship. In particular, the nuclear safety R&D program related to the emerging CANDU ageing issues is discussed. The paper concludes by identifying directions for the future nuclear safety R&D.

EGS code system: computer programs for the Monte Carlo simulation of electromagnetic cascade showers. Version 3

International Nuclear Information System (INIS)

Ford, R.L.; Nelson, W.R.

1978-06-01

A code to simulate almost any electron--photon transport problem conceivable is described. The report begins with a lengthy historical introduction and a description of the shower generation process. Then the detailed physics of the shower processes and the methods used to simulate them are presented. Ideas of sampling theory, transport techniques, particle interactions in general, and programing details are discussed. Next, EGS calculations and various experiments and other Monte Carlo results are compared. The remainder of the report consists of user manuals for EGS, PEGS, and TESTSR codes; options, input specifications, and typical output are included. 38 figures, 12 tables

Coding and Billing in Surgical Education: A Systems-Based Practice Education Program.

Science.gov (United States)

Ghaderi, Kimeya F; Schmidt, Scott T; Drolet, Brian C

Despite increased emphasis on systems-based practice through the Accreditation Council for Graduate Medical Education core competencies, few studies have examined what surgical residents know about coding and billing. We sought to create and measure the effectiveness of a multifaceted approach to improving resident knowledge and performance of documenting and coding outpatient encounters. We identified knowledge gaps and barriers to documentation and coding in the outpatient setting. We implemented a series of educational and workflow interventions with a group of 12 residents in a surgical clinic at a tertiary care center. To measure the effect of this program, we compared billing codes for 1 year before intervention (FY2012) to prospectively collected data from the postintervention period (FY2013). All related documentation and coding were verified by study-blinded auditors. Interventions took place at the outpatient surgical clinic at Rhode Island Hospital, a tertiary-care center. A cohort of 12 plastic surgery residents ranging from postgraduate year 2 through postgraduate year 6 participated in the interventional sequence. A total of 1285 patient encounters in the preintervention group were compared with 1170 encounters in the postintervention group. Using evaluation and management codes (E&M) as a measure of documentation and coding, we demonstrated a significant and durable increase in billing with supporting clinical documentation after the intervention. For established patient visits, the monthly average E&M code level increased from 2.14 to 3.05 (p coding and billing of outpatient clinic encounters. Using externally audited coding data, we demonstrate significantly increased rates of higher complexity E&M coding in a stable patient population based on improved documentation and billing awareness by the residents. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Object-Oriented Programming in the Development of Containment Analysis Code

International Nuclear Information System (INIS)

Han, Tae Young; Hong, Soon Joon; Hwang, Su Hyun; Lee, Byung Chul; Byun, Choong Sup

2009-01-01

After the mid 1980s, the new programming concept, Object-Oriented Programming (OOP), was introduced and designed, which has the features such as the information hiding, encapsulation, modularity and inheritance. These offered much more convenient programming paradigm to code developers. The OOP concept was readily developed into the programming language as like C++ in the 1990s and is being widely used in the modern software industry. In this paper, we show that the OOP concept is successfully applicable to the development of safety analysis code for containment and propose the more explicit and easy OOP design for developers

Announced document collection of the 3rd information exchange meeting on radioactive waste disposal research network

International Nuclear Information System (INIS)

2008-03-01

The 3rd meeting on 'Radioactive Waste Disposal Research Network' was held at the Ricotti techno community square of JAEA on September 3 and 4, 2007. The 'Radioactive Waste Disposal Research Network' was established in Interorganization Atomic Energy Research Program under academic collaborative agreement between Japan Atomic Energy Agency and the University of Tokyo. The objective is to bring both research infrastructures and human expertise in Japan to an adequate performance level, thereby contributing to the development of the fundamental research area in the field of radioactive waste disposal. This lecture material is a collection of presentations and discussions during the information exchange meeting. (author)

3rd International Multidisciplinary Microscopy and Microanalysis Congress

CERN Document Server

Oral, Zehra

2017-01-01

The 3rd International Multidisciplinary Microscopy Congress (InterM2015), held from 19 to 23 October 2015, focused on the latest developments concerning applications of microscopy in the biological, physical and chemical sciences at all dimensional scales, advances in instrumentation, techniques in and educational materials on microscopy. These proceedings gather 17 peer-reviewed technical papers submitted by leading academic and research institutions from nine countries and representing some of the most cutting-edge research available.

Computations for Truck Sliding with TRUCK 3.1 Code

Science.gov (United States)

1989-08-01

16 REFERENCES 1. L u. \\Villiam N.. Hobbs. Norman P. and Atkinson, Michael. TRUCK 3.1-An Improrcd Digital (’oiputtr Program for Calculating the Response...for Operations and Plans ATIN: Technical Libary Director of Chemical & Nuear Operations Dpartnt of the AIW Waskbington, DC 20310 1 Cocaeder US Ay...Lawrenoe Livermore Lab. ATIN: Code 2124, Tedhnical ATTN: Tech Info Dept L-3 Reports Libary P.O. Be 808 Monterey, CA 93940 Livermore, CA 94550 AFSC

Study on applicability of evaluation model of manpower needs for dismantling of equipments in FUGEN-1. Dismantling process in 3rd/4th feedwater heater room

International Nuclear Information System (INIS)

Shibahara, Yuji; Izumi, Masanori; Nanko, Takashi; Tachibana, Mitsuo; Ishigami, Tsutomu

2010-10-01

Manpower needs for the dismantling process on the dismantling of equipments in FUGEN 3rd/4th feedwater heater room was calculated with the management data evaluation system (PRODIA Code), and it was inspected whether the conventional evaluation model had applicability for FUGEN or not. It was confirmed that the conventional evaluation model for feedwater heater had no applicability. In comparison of the calculated value with the actual data, we found two difference: 1) the calculated value were significantly larger than the actual data, 2) the actual data for the dismantling of 3rd feedwater heater was twice larger than that of 4th feedwater heater, though these equipments were almost same weight. It was found that these were brought 1) by the difference in the work descriptions of dismantling between JPDR and FUGEN, and 2) by that in the cutting number between 3rd feedwater heater and 4th one. The manpower needs for the dismantling of both feedwater heaters were calculated with a new calculation equation reflecting the descriptions of dismantling, and it was found that these results showed the good agreement with the actual data. (author)

Comparison of Assemblies of Four-Link Structural Groups of 3rd Class on the Transmission Angle

Directory of Open Access Journals (Sweden)

Matsyuk I.N.

2016-05-01

Full Text Available Comparison of various assemblies of four-link structural group of 3rd class with revolute joints on the transmission angle is performed. Equations of the trajectories of plug points of one of the groups of joint are obtained to determine transmission angles. Derived functions of these equations enable to determine the values of transmission angles for each assembly group. It is shown that only two assemblies of maximum possible assembling number of such group (six have practical value. The solution of this problem was performed with the help of Mathcad program.

Annual coded wire tag program (Washington) missing production groups: annual report for 1997; ANNUAL

International Nuclear Information System (INIS)

Byrne, J.; Fuss, H.; Ashbrook, C.

1998-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded Wire Tag Program - Missing Production Groups for Columbia River Hatcheries'' project. The Washington Department of Fish and Wildlife (WDFW), Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time and to meet various measures of the Northwest Power Planning Councils (NWPPC) Fish and Wildlife Program. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries. Objective 1 for FY-97 was met with few modifications to the original FY-97 proposal. Under Objective 2, snouts containing coded-wire tags that were recovered during FY-97 were decoded. Under Objective 3, survival, contribution and stray rate estimates for the 1991-96 broods of chinook and 1993-96 broods of coho have not been made because recovery data for 1996-97 fisheries and escapement are preliminary. This report summarizes recovery information through 1995

3rd International Conference on Multimedia Technology

CERN Document Server

Yang, Jian; Jiao, Feng

2014-01-01

Proceedings of the 3rd International Conference on Multimedia Technology (ICMT2013) focuses on both the theory and applications of multimedia technology. The recent advances, new research findings and applications in the fields of theoretical, experimental and applied image & video processing and multimedia technology presented at the conference are brought together in this book. It will serve as a valuable reference for scientists and engineers working in multimedia and related fields. Prof. Aly A. Farag works at the University of Louisville, USA; Prof. Jian Yang works at Tsinghua University, China; Dr. Feng Jiao works at Nanjing University of Information Science & Technology, China.

Annual coded wire tag program, Washington: Missing production groups. Annual report for 1998

International Nuclear Information System (INIS)

Byrne, J.; Fuss, H.

1999-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded Wire Tag Program--Missing Production Groups for Columbia River Hatcheries'' project. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries

R&D for Safety Codes and Standards: Materials and Components Compatibility

Energy Technology Data Exchange (ETDEWEB)

Somerday, Brian P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); LaFleur, Chris [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Marchi, Chris San [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2015-08-01

This project addresses the following technical barriers from the Safety, Codes and Standards section of the 2012 Fuel Cell Technologies Office Multi-Year Research, Development and Demonstration Plan (section 3.8): (A) Safety data and information: limited access and availability (F) Enabling national and international markets requires consistent RCS (G) Insufficient technical data to revise standards.

S3C: EBT Steady-State Shooting code description and user's guide

International Nuclear Information System (INIS)

Downum, W.B.

1983-09-01

The Oak Ridge National Laboratory (ORNL) one-dimensional (1-D) Steady-State Shooting code (S3C) for ELMO Bumpy Torus (EBT) plasmas is described. Benchmark calculations finding the steady-state density and electron and ion temperature profiles for a known neutral density profile and known external energy sources are carried out. Good agreement is obtained with results from the ORNL Radially Resolved Time Dependent 1-D Transport code for an EBT-Q type reactor. The program logic is described, along with the physics models in each code block and the variable names used. Sample input and output files are listed, along with the main code

Evaluation of paracavernous cranial nerves (3rd to 6th) with CT

International Nuclear Information System (INIS)

Tsuha, Mitsuru; Okamura, Tomomi; Abiko, Seisho; Aoki, Hideo

1984-01-01

We have now used CT to evaluate the cavernous sinuses, especially the 3rd, 4th, 5th, and 6th cranial nerves. adjacent to them. Twenty cases, presumably all having sellar or parasellar lesions, were examined by means of thin-slice (2-4 mm) axial and coronal (including both direct and reconstructed methods) CT studies. Moreover, three blocks of the sellar region obtained from adult cadavers were examined beforehand by CT scan, and the courses of the respective paracavernous cranial nerves were confirmed by microsurgical dissection. As a result, the following conclusions were obtained. 1. It was valuable to perform a post-enhanced direct coronal study for the definite identification of the paracavernous cranial nerves (3rd to 6th cranial nerves). 2. Also valuable was a magnified CT film of the parasellar regions, which made the identification of the parasellar cranial nerves clearer. 3. In the clinical cases showing a normal shape of the cavernous sinuses on CT, each cranial nerve was evaluated. In the axial studies (almost 10 to 15 degrees anterior to Reid's basal line), the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 76%, 97% (as to the Gasserian ganglion), and 21% respectively. None of the 4th cranial nerve was visualized in the cases examined. On the other hand, the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 83%, 86%, and 21% respectively in the direct coronal studies and 62%, 57%, and 4% in those of the reconstructed films. The visualization of each cranial nerve in the direct coronal study was better than when the reconstructed method was used. Finally, a schematic presentation of the cranial nerves adjacent to the cavernous sinuses was made in the axial and coronal projections. (J.P.N.)

Utilities programs for the WIMSD4 code

International Nuclear Information System (INIS)

Leszczynski, F.

1990-01-01

The WIMSD4 code is widely known around the world. For its better use, it is convenient to count with auxiliary programs. Two of these programs, developed in FORTRAN 77, in the VAX computer of the Bariloche Atomic Center, are herein presented. WINTER (Wims INTERactive) to generate input data of WIMSD4 in an interactive way, and AMICO (Anisn MIx and COndense) to deal with cross sections data of a multigroup data library and of WIMS output to be used in other programs, such as: ANISN, DOT, CITATION, DIPOBAR, etc. (Author) [es

Shader programming for computational arts and design: A comparison between creative coding frameworks

OpenAIRE

Gomez, Andres Felipe; Colubri, Andres; Charalambos, Jean Pierre

2016-01-01

We describe an Application Program Interface (API) that facilitates the use of GLSL shaders in computational design, interactive arts, and data visualization. This API was first introduced in the version 2.0 of Processing, a programming language and environment widely used for teaching and production in the context of media arts and design, and has been recently completed in the 3.0 release. It aims to incorporate low-level shading programming into code-based design, by int...

3rd International Conference on X-ray Technique

Science.gov (United States)

Potrakhov, N. N.; Gryaznov, A. Yu; Lisenkov, A. A.; Kostrin, D. K.

2017-02-01

In this preface a brief history, modern aspects and future tendencies in development of the X-ray technique as seen from the 3rd International Conference on X-ray Technique that was held on 24-25 November 2016 in Saint Petersburg, Russia are described On 24-25 November 2016 in Saint Petersburg on the basis of Saint Petersburg State Electrotechnical University “LETI” n. a. V. I. Ulyanov (Lenin) was held the 3rd International Conference on X-ray Technique. The tradition to hold a similar conference in our country was laid in Soviet times. The last of them, the All-Union Conference on the Prospects of X-ray Tubes and Equipment was organized and held more than a quarter century ago - on 21-23 November 1999, at the initiative and under the leadership of the chief engineer of the Leningrad association of electronic industry “Svetlana” Borovsky Alexander Ivanovich and the chief of special design bureau of X-ray devices of “Svetlana” Shchukin Gennady Anatolievich. The most active part in the organization and work of the conference played members of the department of X-ray and electron beam instruments of Leningrad Electrotechnical Institute “LETI” (the former name of Saint Petersburg State Electrotechnical University “LETI”), represented by head of the department professor Ivanov Stanislav Alekseevich.

LFTPLT8: plotter program for RELAP5 code

International Nuclear Information System (INIS)

Yamano, Kazuaki; Abe, Nobuaki; Tasaka, Kanji

1981-02-01

The plotter program LFTPLT8 is a new version of the LFTPLT7 developed to plot the calculated results by RELAP5 code. The RELAP5/MOD0 code has also been revised for LFTPLT8. LFTPLT8 is capable of multiple plotting of any combination of experimental data and calculated results by RELAP4J, RELAP4/MOD5, ALARM-P1, and RELAP5/MOD0. (author)

2009 Annual Progress Report: DOE Hydrogen Program, November 2009 (Book)

Energy Technology Data Exchange (ETDEWEB)

2009-11-01

This report summarizes the hydrogen and fuel cell R&D activities and accomplishments of the DOE Hydrogen Program for FY2009. It covers the program areas of hydrogen production and delivery; fuel cells; manufacturing; technology validation; safety, codes and standards; education; and systems analysis.

FAFNER - a fully 3-D neutral beam injection code using Monte Carlo methods

International Nuclear Information System (INIS)

Lister, G.G.

1985-01-01

A computer code is described which models the injection of fast neutral particles into 3-dimensional toroidal plasmas and follows the paths of the resulting fast ions until they are either lost to the system or fully thermalised. A comprehensive model for the neutral beam injection system is included. The code is written especially for the use on the CRAY-1 computer: in particular, the modular nature of the program should enable the most time consuming sections of the program to be vectorised for each particular experiment to be modelled. The effects of plasma contamination by possible injection of impurities, such as oxygen, with the beams are also included. The code may also be readily adapted to plasmas for which a 1 or 2-dimensional description is adequate. It has also been constructed with a view to ready coupling with a transport or equilibrium code. (orig.)

Automatic coding method of the ACR Code

International Nuclear Information System (INIS)

Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi

1993-01-01

The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology

Adaption, validation and application of advanced codes with 3-dimensional neutron kinetics for accident analysis calculations - STC with Bulgaria

International Nuclear Information System (INIS)

Grundmann, U.; Kliem, S.; Mittag, S.; Rohde, U.; Seidel, A.; Panayotov, D.; Ilieva, B.

2001-08-01

In the frame of a project on scientific-technical co-operation funded by BMBF/BMWi, the program code DYN3D and the coupled code ATHLET-DYN3D have been transferred to the Institute for Nuclear Research and Nuclear Energy (INRNE) Sofia. The coupled code represents an implementation of the 3D core model DYN3D developed by FZR into the GRS thermal-hydraulics code system ATHLET. For the purpose of validation of these codes, a measurement data base about a start-up experiment obtained at the unit 6 of Kozloduy NPP (VVER-1000/V-320) has been generated. The results of performed validation calculations were compared with measurement values from the data base. A simplified model for estimation of cross flow mixing between fuel assemblies has been implemented into the program code DYN3D by Bulgarian experts. Using this cross flow model, transient processes with asymmetrical boundary conditions can be analysed more realistic. The validation of the implemented model were performed with help of comparison calculations between modified DYD3D code and thermal-hydraulics code COBRA-4I, and also on the base of the collected measurement data from Kozloduy NPP. (orig.) [de

DOE Hydrogen Program 2004 Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

2004-10-01

This document summarizes the project evaluations and comments from the DOE Hydrogen Program 2004 Annual Program Review. Hydrogen production, delivery and storage; fuel cells; technology validation; safety, codes and standards; and education R&D projects funded by DOE in FY2004 are reviewed.

Data of evolutionary structure change: 1ONAD-2D3RD [Confc[Archive

Lifescience Database Archive (English)

Full Text Available 1ONAD-2D3RD 1ONA 2D3R D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLK------TNALHFMFNQFSKDQKDLILQGDAT...n> 1ONA D 1ONAD TRVS

Validation and applicability of the 3D core kinetics and thermal hydraulics coupled code SPARKLE

International Nuclear Information System (INIS)

Miyata, Manabu; Maruyama, Manabu; Ogawa, Junto; Otake, Yukihiko; Miyake, Shuhei; Tabuse, Shigehiko; Tanaka, Hirohisa

2009-01-01

The SPARKLE code is a coupled code system based on three individual codes whose physical models have already been verified and validated. Mitsubishi Heavy Industries (MHI) confirmed the coupling calculation, including data transfer and the total reactor coolant system (RCS) behavior of the SPARKLE code. The confirmation uses the OECD/NEA MSLB benchmark problem, which is based on Three Mile Island Unit 1 (TMI-1) nuclear power plant data. This benchmark problem has been used to verify coupled codes developed and used by many organizations. Objectives of the benchmark program are as follows. Phase 1 is to compare the results of the system transient code using point kinetics. Phase 2 is to compare the results of the coupled three-dimensional (3D) core kinetics code and 3D core thermal-hydraulics (T/H) code, and Phase 3 is to compare the results of the combined coupled system transient code, 3D core kinetics code, and 3D core T/H code as a total validation of the coupled calculation. The calculation results of the SPARKLE code indicate good agreement with other benchmark participants' results. Therefore, the SPARKLE code is validated through these benchmark problems. In anticipation of applying the SPARKLE code to licensing analyses, MHI and Japanese PWR utilities have established a safety analysis method regarding the calculation conditions such as power distributions, reactivity coefficients, and event-specific features. (author)

Energy Efficiency Program Administrators and Building Energy Codes

Science.gov (United States)

Explore how energy efficiency program administrators have helped advance building energy codes at federal, state, and local levels—using technical, institutional, financial, and other resources—and discusses potential next steps.

49 CFR 41.120 - Acceptable model codes.

Science.gov (United States)

2010-10-01

... 1991 International Conference of Building Officials (ICBO) Uniform Building Code, published by the... Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code, published by the Building Officials and Code Administrators, 4051 West Flossmoor Rd., Country Club Hills...

RNA-dependent RNA polymerase of hepatitis C virus binds to its coding region RNA stem-loop structure, 5BSL3.2, and its negative strand.

Science.gov (United States)

Kanamori, Hiroshi; Yuhashi, Kazuhito; Ohnishi, Shin; Koike, Kazuhiko; Kodama, Tatsuhiko

2010-05-01

The hepatitis C virus NS5B RNA-dependent RNA polymerase (RdRp) is a key enzyme involved in viral replication. Interaction between NS5B RdRp and the viral RNA sequence is likely to be an important step in viral RNA replication. The C-terminal half of the NS5B-coding sequence, which contains the important cis-acting replication element, has been identified as an NS5B-binding sequence. In the present study, we confirm the specific binding of NS5B to one of the RNA stem-loop structures in the region, 5BSL3.2. In addition, we show that NS5B binds to the complementary strand of 5BSL3.2 (5BSL3.2N). The bulge structure of 5BSL3.2N was shown to be indispensable for tight binding to NS5B. In vitro RdRp activity was inhibited by 5BSL3.2N, indicating the importance of the RNA element in the polymerization by RdRp. These results suggest the involvement of the RNA stem-loop structure of the negative strand in the replication process.

The Role of Training and Promotion to Increase The 3rd Party Funds Indonesian Islamic Banking

Directory of Open Access Journals (Sweden)

Rahmat Hidayat

2014-03-01

Full Text Available Objective – This study aims to determine whether the role of training is much larger than the promotion in raising third-party funds in Islamic banks in Indonesia given the cost of the training is spent is greater than the cost of promotion. This study empirically examines the relationship and impact of training and promotion to raise funds for a 3rd party in Indonesia Islamic banks.Methods – This study uses secondary data Islamic commercial banks in the form of panel (time-series and cross-section of Bank Indonesia data from 2010 until 2012. There are two independent variables training cost (X1 and promotion cost (X2 and one dependent variable is 3rd-party funds (Y. The analysis technique used path analysis to examine the role of training and the promotion of financial performance (The 3rd Party Funds.Result – Simultaneously, training and promotion gives an effect by 52%, and partially or individual training gives an insignificant negative effect, while the promotion has a significant positive impact on financial performance (financial-party funds on Islamic banking.Conclusion – The role of promotion is higher in raising The 3rd Party Funds than training. Keywords : Cost, Training, Promotion, The 3rd Party Funds 

AutoBayes/CC: Combining Program Synthesis with Automatic Code Certification: System Description

Science.gov (United States)

Whalen, Michael; Schumann, Johann; Fischer, Bernd; Clancy, Daniel (Technical Monitor)

2002-01-01

Code certification is a lightweight approach to formally demonstrate software quality. It concentrates on aspects of software quality that can be defined and formalized via properties, e.g., operator safety or memory safety. Its basic idea is to require code producers to provide formal proofs that their code satisfies these quality properties. The proofs serve as certificates which can be checked independently, by the code consumer or by certification authorities, e.g., the FAA. It is the idea underlying such approaches as proof-carrying code [6]. Code certification can be viewed as a more practical version of traditional Hoare-style program verification. The properties to be verified are fairly simple and regular so that it is often possible to use an automated theorem prover to automatically discharge all emerging proof obligations. Usually, however, the programmer must still splice auxiliary annotations (e.g., loop invariants) into the program to facilitate the proofs. For complex properties or larger programs this quickly becomes the limiting factor for the applicability of current certification approaches.

Delay-Aware Program Codes Dissemination Scheme in Internet of Everything

Directory of Open Access Journals (Sweden)

Yixuan Xu

2016-01-01

Full Text Available Due to recent advancements in big data, connection technologies, and smart devices, our environment is transforming into an “Internet of Everything” (IoE environment. These smart devices can obtain new or special functions by reprogramming: upgrade their soft systems through receiving new version of program codes. However, bulk codes dissemination suffers from large delay, energy consumption, and number of retransmissions because of the unreliability of wireless links. In this paper, a delay-aware program dissemination (DAPD scheme is proposed to disseminate program codes with fast, reliable, and energy-efficient style. We observe that although total energy is limited in wireless sensor network, there exists residual energy in nodes deployed far from the base station. Therefore, DAPD scheme improves the performance of bulk codes dissemination through the following two aspects. (1 Due to the fact that a high transmitting power can significantly improve the quality of wireless links, transmitting power of sensors with more residual energy is enhanced to improve link quality. (2 Due to the fact that performance of correlated dissemination tends to degrade in a highly dynamic environment, link correlation is autonomously updated in DAPD during codes dissemination to maintain improvements brought by correlated dissemination. Theoretical analysis and experimental results show that, compared with previous work, DAPD scheme improves the dissemination performance in terms of completion time, transmission cost, and the efficiency of energy utilization.

Proceedings of the 23rd DOE/NRC nuclear air cleaning conference

Energy Technology Data Exchange (ETDEWEB)

First, M.W. [ed.] [Harvard Univ., Boston, MA (United States). Harvard Air Cleaning Lab.

1995-02-01

The report contains the papers presented at the 23rd DOE/NRC Nuclear Air Cleaning Conference and the associated discussions. Major topics are: (1) nuclear air cleaning codes, (2) nuclear waste, (3) filters and filtration, (4) effluent stack monitoring, (5) gas processing, (6) adsorption, (7) air treatment systems, (8) source terms and accident analysis, and (9) fuel reprocessing. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Report of the 2014 Programming Models and Environments Summit

Energy Technology Data Exchange (ETDEWEB)

Heroux, Michael [US Dept. of Energy, Washington, DC (United States); Lethin, Richard [US Dept. of Energy, Washington, DC (United States)

2016-09-19

Programming models and environments play the essential roles in high performance computing of enabling the conception, design, implementation and execution of science and engineering application codes. Programmer productivity is strongly influenced by the effectiveness of our programming models and environments, as is software sustainability since our codes have lifespans measured in decades, so the advent of new computing architectures, increased concurrency, concerns for resilience, and the increasing demands for high-fidelity, multi-physics, multi-scale and data-intensive computations mean that we have new challenges to address as part of our fundamental R&D requirements. Fortunately, we also have new tools and environments that make design, prototyping and delivery of new programming models easier than ever. The combination of new and challenging requirements and new, powerful toolsets enables significant synergies for the next generation of programming models and environments R&D. This report presents the topics discussed and results from the 2014 DOE Office of Science Advanced Scientific Computing Research (ASCR) Programming Models & Environments Summit, and subsequent discussions among the summit participants and contributors to topics in this report.

Epidemiology of 3rd generation cephalosporin-resistant Escherichia coli on dairy farms

Science.gov (United States)

Dairy cattle have been identified as a reservoir for 3rd generation cephalosporin (3GC)-resistant Escherichia coli. We previously identified 3GC-resistant E. coli from manure composite samples of calves and cows in a survey of 80 farms in Pennsylvania. Resistant strains were most frequently isolated...

Description of ground motion data processing codes: Volume 3

International Nuclear Information System (INIS)

Sanders, M.L.

1988-02-01

Data processing codes developed to process ground motion at the Nevada Test Site for the Weapons Test Seismic Investigations Project are used today as part of the program to process ground motion records for the Nevada Nuclear Waste Storage Investigations Project. The work contained in this report documents and lists codes and verifies the ''PSRV'' code. 39 figs

Tretji slovenski MoodleMoot = 3rd Slovenian MoodleMoot

Directory of Open Access Journals (Sweden)

Viktorija Sulčič

2009-09-01

Full Text Available This year, the 3rd international moodle.si conference took place in Koper and brought together Slovenian users of Moodle, an open-source learning management system. This year’s conference, which is presented in the paper, was especially interesting due to its plenary session being wholly dedicated to the national e-schooling project. An interesting addition was also Apple’s workshop about using iLife applications in education.

Remodularizing Java Programs for Improved Locality of Feature Implementations in Source Code

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2011-01-01

Explicit traceability between features and source code is known to help programmers to understand and modify programs during maintenance tasks. However, the complex relations between features and their implementations are not evident from the source code of object-oriented Java programs....... Consequently, the implementations of individual features are difficult to locate, comprehend, and modify in isolation. In this paper, we present a novel remodularization approach that improves the representation of features in the source code of Java programs. Both forward- and reverse restructurings...... are supported through on-demand bidirectional restructuring between feature-oriented and object-oriented decompositions. The approach includes a feature location phase based of tracing program execution, a feature representation phase that reallocates classes into a new package structure based on single...

The integrated code system CASCADE-3D for advanced core design and safety analysis

International Nuclear Information System (INIS)

Neufert, A.; Van de Velde, A.

1999-01-01

The new program system CASCADE-3D (Core Analysis and Safety Codes for Advanced Design Evaluation) links some of Siemens advanced code packages for in-core fuel management and accident analysis: SAV95, PANBOX/COBRA and RELAP5. Consequently by using CASCADE-3D the potential of modern fuel assemblies and in-core fuel management strategies can be much better utilized because safety margins which had been reduced due to conservative methods are now predicted more accurately. By this innovative code system the customers can now take full advantage of the recent progress in fuel assembly design and in-core fuel management.(author)

Vectorization of DOT3.5 code

International Nuclear Information System (INIS)

Nonomiya, Iwao; Ishiguro, Misako; Tsutsui, Tsuneo

1990-07-01

In this report, we describe the vectorization of two-dimensional Sn-method radiation transport code DOT3.5. Vectorized codes are not only the NEA original version developed at ORNL but also the versions improved by JAERI: DOT3.5 FNS version for fusion neutronics analyses, DOT3.5 FER version for fusion reactor design, and ESPRIT module of RADHEAT-V4 code system for radiation shielding and radiation transport analyses. In DOT3.5, input/output processing time amounts to a great part of the elapsed time when a large number of energy groups and/or a large number of spatial mesh points are used in the calculated problem. Therefore, an improvement has been made for the speedup of input/output processing in the DOT3.5 FNS version, and DOT-DD (Double Differential cross section) code. The total speedup ratio of vectorized version to the original scalar one is 1.7∼1.9 for DOT3.5 NEA version, 2.2∼2.3 fro DOT3.5 FNS version, 1.7 for DOT3.5 FER version, and 3.1∼4.4 for RADHEAT-V4, respectively. The elapsed times for improved DOT3.5 FNS version and DOT-DD are reduced to 50∼65% that of the original version by the input/output speedup. In this report, we describe summary of codes, the techniques used for the vectorization and input/output speedup, verification of computed results, and speedup effect. (author)

A fast reactor transient analysis methodology for PCs: Volume 3, LTC program manual of the QuickBASIC code

International Nuclear Information System (INIS)

Ott, K.O.; Chung, L.

1992-06-01

This manual augments the detailed manual of the GW-BASIC version of the LTC code for an application in QuickBASIC. As most of the GW-BASIC coding of this program for ''LMR Transient Calculations'' is compatible with QuickBASIC, this manual pertains primarily to the required changes, such as the handling of input and output. The considerable reduction in computation time achieved by this conversion is demonstrated for two sample problems, using a variety of hardware and execution options. The revised code is listed. Although the severe storage limitations of GW-BASIC no longer apply, the LOF transient path has not been completed in this QuickBASIC code. Its advantages are thus primarily in the much faster running time for TOP and LOHS transients. For the fastest PC hardware (486) and execution option the computation time is reduced by a factor of 124 compared to GW-BASIC on a 386/20

The role of hemorrhoidopexy in the management of 3rd degree hemorrhoids.

Science.gov (United States)

Pramateftakis, M G

2010-11-01

Hemorrhoidopathy is a very common benign surgical pathology. Hemorrhoids are divided into 4 stages, depending on symptoms and degree of prolapse. Hemorrhoidopexy is a technique developed for the treatment of 3rd degree hemorrhoids, but its application has been extended to the treatment of 4th degree hemorrhoids as well. Nevertheless, recent studies identify weaknesses of the PPH in the treatment of 4th degree hemorrhoids. One hundred and twenty-six consecutive patients with 3rd degree hemorrhoids underwent stapled hemorrhoidopexy. All procedures were performed under general anesthesia with the patient in lithotomy position. A phosphate enema was given to the patient 2 h before the procedure, and cephalosporine and metronidazole were administered at anesthesia induction. Most patients were discharged the day after the operation. All patients were reassessed at 1, 6 weeks, 6 and 12 months after the procedure. The mean operating time was 16.3 min. Of all patients, 5.8% complained of mild rectal pain for a post-operative period of 5-12 days, 5.8% developed post-operative urinary retention, managed with catheterization, 13.3% experienced fecal urgency while 5.8% experienced gas incontinence, which subsided 2-8 weeks from surgery. The mean hospital stay was 1.2 days. Most patients returned to daily activities within 2-5 days. Ninety-five percent of patients returned for their follow-up visits. Recurrence of the disease occurred in 8 patients (6.6%). It was managed conservatively in 2 patients, 3 underwent redo hemorrhoidopexy and 3 underwent classic hemorrhoidectomy. According to our results, stapled hemorrhoidopexy seems to be a safe, pain-free and, in the long-term, effective technique for the treatment of 3rd degree hemorrhoids.

2015 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

Energy Technology Data Exchange (ETDEWEB)

None

2015-12-23

The 2015 Annual Progress Report summarizes fiscal year 2015 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; and market transformation.

RunJumpCode: An Educational Game for Educating Programming

Science.gov (United States)

Hinds, Matthew; Baghaei, Nilufar; Ragon, Pedrito; Lambert, Jonathon; Rajakaruna, Tharindu; Houghton, Travers; Dacey, Simon

2017-01-01

Programming promotes critical thinking, problem solving and analytic skills through creating solutions that can solve everyday problems. However, learning programming can be a daunting experience for a lot of students. "RunJumpCode" is an educational 2D platformer video game, designed and developed in Unity, to teach players the…

Retrospective Benefit-Cost Evaluation of U.S. DOE Wind Energy R&D Program: Impact of Selected Energy Technology Investments

Energy Technology Data Exchange (ETDEWEB)

Pelsoci, Thomas M. [Delta Research Co., Evanston, IL (United States)

2010-06-01

This benefit-cost analysis focuses on the DOE Wind Energy Program's public sector R&D investments and returns. The analysis accounts for the program's additionality – that is, comparing what has happened as a result of the program to what would have happened without it. The analysis does not address the return on the investments of private companies ("private returns"). Public returns on the program's investments from 1976 to 2008 are identified and analyzed using retrospective analysis.

Analysis of SCARABEE BE+3 experiment with ASTEC-Na and comparison with other SFR safety analysis codes

International Nuclear Information System (INIS)

Bandini, Giacomino; Ederli, Stefano; Perez-Martin, Sara; Pfrang, Werner; Girault, Nathalie; Cloarec, Laure

2017-01-01

The ASTEC-Na code was further developed and assessed in the frame of JASMIN project of the 7th EU Framework Program to extend the original capability of ASTEC, dealing with severe accident analysis in LWR to Sodium-cooled Fast Reactors (SFR). The in-pile BE+3 experiment from the SCARABEE-N program has been simulated with ASTEC-Na for thermal-hydraulic models validation purpose. The adequacy of ASTEC-Na thermal-hydraulic models has been also investigated through the comparison with other safety analysis codes. The analysis of SCARABEE BE+3 test confirms the good performance of ASTEC-Na code in the calculation of single-phase conditions and boiling onset, while larger deviations are encountered in the analysis of the two-phase conditions, mainly regarding the propagation of the boiling front. Furthermore, reasonable agreement was found with other code results. (author)

3rd Session of the Sant Cugat Forum on Astrophysics

CERN Document Server

Gravitational wave astrophysics

2015-01-01

This book offers review chapters written by invited speakers of the 3rd Session of the Sant Cugat Forum on Astrophysics — Gravitational Waves Astrophysics. All chapters have been peer reviewed. The book goes beyond normal conference proceedings in that it provides a wide panorama of the astrophysics of gravitational waves and serves as a reference work for researchers in the field.

The 3rd Sino-Japan nuclear medicine conference

International Nuclear Information System (INIS)

1999-01-01

The 3rd Sino-Japan Nuclear Medicine Conference was hold on May 11-13, 1999 in Xi'an of China by Chinese Society of Nuclear Medicine, Japanese Society of Nuclear Medicine, Chinese Medicine Association and Japan-China Medicine Association. 62 articles were published in the proceeding of the conference. The contents of the articles include development and application of the radioisotopes (such as Tc-99, I-125, I-131, F-18, In-111, Tl-201, Ga-67, Sm-153, Re-188) and its radiopharmaceuticals, but application also include radiotherapy and diagnosis in the oncology and pathology by SPECT and PET

Generation of Efficient High-Level Hardware Code from Dataflow Programs

OpenAIRE

Siret , Nicolas; Wipliez , Matthieu; Nezan , Jean François; Palumbo , Francesca

2012-01-01

High-level synthesis (HLS) aims at reducing the time-to-market by providing an automated design process that interprets and compiles high-level abstraction programs into hardware. However, HLS tools still face limitations regarding the performance of the generated code, due to the difficulties of compiling input imperative languages into efficient hardware code. Moreover the hardware code generated by the HLS tools is usually target-dependant and at a low level of abstraction (i.e. gate-level...

PC-based support programs coupled with the sets code for large fault tree analysis

International Nuclear Information System (INIS)

Hioki, K.; Nakai, R.

1989-01-01

Power Reactor and Nuclear Fuel Development Corporation (PNC) has developed four PC programs: IEIQ (Initiating Event Identification and Quantification), MODESTY (Modular Even Description for a Variety of Systems), FAUST (Fault Summary Tables Generation Program) and ETAAS (Event Tree Analysis Assistant System). These programs prepare the input data for the SETS (Set Equation Transformation System) code and construct and quantify event trees (E/Ts) using the output of the SETS code. The capability of these programs is described and some examples of the results are presented in this paper. With these PC programs and the SETS code, PSA can now be performed with more consistency and less manpower

Introduction of the ASP3D Computer Program for Unsteady Aerodynamic and Aeroelastic Analyses

Science.gov (United States)

Batina, John T.

2005-01-01

A new computer program has been developed called ASP3D (Advanced Small Perturbation 3D), which solves the small perturbation potential flow equation in an advanced form including mass-consistent surface and trailing wake boundary conditions, and entropy, vorticity, and viscous effects. The purpose of the program is for unsteady aerodynamic and aeroelastic analyses, especially in the nonlinear transonic flight regime. The program exploits the simplicity of stationary Cartesian meshes with the movement or deformation of the configuration under consideration incorporated into the solution algorithm through a planar surface boundary condition. The new ASP3D code is the result of a decade of developmental work on improvements to the small perturbation formulation, performed while the author was employed as a Senior Research Scientist in the Configuration Aerodynamics Branch at the NASA Langley Research Center. The ASP3D code is a significant improvement to the state-of-the-art for transonic aeroelastic analyses over the CAP-TSD code (Computational Aeroelasticity Program Transonic Small Disturbance), which was developed principally by the author in the mid-1980s. The author is in a unique position as the developer of both computer programs to compare, contrast, and ultimately make conclusions regarding the underlying formulations and utility of each code. The paper describes the salient features of the ASP3D code including the rationale for improvements in comparison with CAP-TSD. Numerous results are presented to demonstrate the ASP3D capability. The general conclusion is that the new ASP3D capability is superior to the older CAP-TSD code because of the myriad improvements developed and incorporated.

Advanced lectures on multiprocessor programming (1/3)

CERN Multimedia

CERN. Geneva

2011-01-01

Three classes (60 mins) on Multiprocessor Programming Prof. Dr. Christoph von Praun Georg-Simon-Ohm University of Applied Sciences Nuremberg, Germany This is an advanced class on multiprocessor programming. The class gives an introduction to principles of concurrent objects and the notion of different progress guarantees that concurrent computations can have. The focus of this class is on non-blocking computations, i.e. concurrent programs that do not make use of locks. We discuss the implementation of practical non-blocking data structures in detail. 1st class: Introduction to concurrent objects 2nd class: Principles of non-blocking synchronization 3rd class: Concurrent queues Brief Bio of Christoph von Praun Christoph worked on a variety of analysis techniques and runtime platforms for parallel programs. Hist most recent research studies programming models and tools that support transactional synchronization. In prior work, which he also did at the IBM T.J. Watson Research Center in Yorktown Height...

The linear programming bound for binary linear codes

NARCIS (Netherlands)

Brouwer, A.E.

1993-01-01

Combining Delsarte's (1973) linear programming bound with the information that certain weights cannot occur, new upper bounds for dmin (n,k), the maximum possible minimum distance of a binary linear code with given word length n and dimension k, are derived.

Application of the extended TRANSURANUS code in FUMEX-III

International Nuclear Information System (INIS)

Schubert, A.; Di Marcello, V.; Van Uffelen van de Laar, P.J.; Botazzoli, P.; Pastore, G.; Boneva, S.

2011-01-01

This paper focuses on the application of the TRANSURANUS code to the LWR priority cases of FUMEX-III. In the 2-nd section the present situation for the main topics of interest is illustrated on examples. The 3-rd section outlines the ongoing code developments and discusses their impact on the simulation of further specific cases of FUMEX-III. In the last section conclusions are drawn from the current status of the analysis

High field accelerator magnet R&D in Europe

NARCIS (Netherlands)

Devred, A.; Baynham, D.E.; Bottura, L.; Chorowski, M; Fabbricatore, P.; Leroy, D.; den Ouden, A.; Rifflet, J.M.; Rossi, L.; Vincent-Viry, O.; Volpini, G.

2004-01-01

The LHC magnet R&D Program has shown that the limit of NbTi technology at 1.8 K was in the range 10 to 10.5 T. Hence, to go beyond the 10-T threshold, it is necessary to change of superconducting material. Given the state of the art in HTS, the only serious candidate is Nb/sub 3/Sn. A series of

Clarithromycin (Biaxin)-lenalidomide-low-dose dexamethasone (BiRd) versus lenalidomide-low-dose dexamethasone (Rd) for newly diagnosed myeloma.

Science.gov (United States)

Gay, Francesca; Rajkumar, S Vincent; Coleman, Morton; Kumar, Shaji; Mark, Tomer; Dispenzieri, Angela; Pearse, Roger; Gertz, Morie A; Leonard, John; Lacy, Martha Q; Chen-Kiang, Selina; Roy, Vivek; Jayabalan, David S; Lust, John A; Witzig, Thomas E; Fonseca, Rafael; Kyle, Robert A; Greipp, Philip R; Stewart, A Keith; Niesvizky, Ruben

2010-09-01

The objective of this case-matched study was to compare the efficacy and toxicity of the addition of clarithromycin (Biaxin) to lenalidomide/low-dose dexamethasone (BiRd) vs. lenalidomide/low-dose dexamethasone (Rd) for newly diagnosed myeloma. Data from 72 patients treated at the New York Presbyterian Hospital-Cornell Medical Center were retrospectively compared with an equal number of matched pair mates selected among patients seen at the Mayo Clinic who received Rd. Case matching was blinded and was performed according to age, gender, and transplant status. On intention-to-treat analysis, complete response (45.8% vs. 13.9%, P < 0.001) and very-good-partial-response or better (73.6% vs. 33.3%, P < 0.001) were significantly higher with BiRd. Time-to-progression (median 48.3 vs. 27.5 months, P = 0.071), and progression-free survival (median 48.3 vs. 27.5 months, P = 0.044) were higher with BiRd. There was a trend toward better OS with BiRd (3-year OS: 89.7% vs. 73.0%, P = 0.170). Main grade 3-4 toxicities of BiRd were hematological, in particular thrombocytopenia (23.6% vs. 8.3%, P = 0.012). Infections (16.7% vs. 9.7%, P = 0.218) and dermatological toxicity (12.5% vs. 4.2%, P = 0.129) were higher with Rd. Results of this case-matched analysis suggest that there is significant additive value when clarithromycin is added to Rd. Randomized phase III trials are needed to confirm these results. © 2010 Wiley-Liss, Inc.

The 3rd Asia–Pacific Transport Working Group (APTWG) Meeting

International Nuclear Information System (INIS)

Jhang, Hogun; Diamond, P.H.; Leconte, M.; Kwon, J.M.; Ida, K.; Tamura, N.; Kosuga, Y.

2014-01-01

This conference report summarizes the contributions to and discussions at the 3rd Asia–Pacific Transport Working Group (APTWG) meeting held in Jeju-island, Korea, on 21–24 May 2013. The main objective of the meeting is to develop a predictive understanding of transport mechanisms in magnetically confined fusion plasmas. In an effort to accomplish this objective, four technical working groups were organized under the headings: (1) transport barrier formation and confinement enhancement, (2) 3D effects and Magnetohydrodynamic–turbulence interaction, (3) momentum transport and non-locality and (4) particle/impurity transport and energetic particles. (conference report)

1.3 GHz superconducting RF cavity program at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Ginsburg, C.M.; Arkan, T.; Barbanotti, S.; Carter, H.; Champion, M.; Cooley, L.; Cooper, C.; Foley, M.; Ge, M.; Grimm, C.; Harms, E.; /Fermilab

2011-03-01

At Fermilab, 9-cell 1.3 GHz superconducting RF (SRF) cavities are prepared, qualified, and assembled into cryomodules (CMs) for Project X, an International Linear Collider (ILC), or other future projects. The 1.3 GHz SRF cavity program includes targeted R&D on 1-cell 1.3 GHz cavities for cavity performance improvement. Production cavity qualification includes cavity inspection, surface processing, clean assembly, and one or more cryogenic low-power CW qualification tests which typically include performance diagnostics. Qualified cavities are welded into helium vessels and are cryogenically tested with pulsed high-power. Well performing cavities are assembled into cryomodules for pulsed high-power testing in a cryomodule test facility, and possible installation into a beamline. The overall goals of the 1.3 GHz SRF cavity program, supporting facilities, and accomplishments are described.

Detonation of high explosives in Lagrangian hydrodynamic codes using the programmed burn technique

International Nuclear Information System (INIS)

Berger, M.E.

1975-09-01

Two initiation methods were developed for improving the programmed burn technique for detonation of high explosives in smeared-shock Lagrangian hydrodynamic codes. The methods are verified by comparing the improved programmed burn with existing solutions in one-dimensional plane, converging, and diverging geometries. Deficiencies in the standard programmed burn are described. One of the initiation methods has been determined to be better for inclusion in production hydrodynamic codes

Documentation for grants equal to tax model: Volume 3, Source code

International Nuclear Information System (INIS)

Boryczka, M.K.

1986-01-01

The GETT model is capable of forecasting the amount of tax liability associated with all property owned and all activities undertaken by the US Department of Energy (DOE) in site characterization and repository development. The GETT program is a user-friendly, menu-driven model developed using dBASE III/trademark/, a relational data base management system. The data base for GETT consists primarily of eight separate dBASE III/trademark/ files corresponding to each of the eight taxes (real property, personal property, corporate income, franchise, sales, use, severance, and excise) levied by State and local jurisdictions on business property and activity. Additional smaller files help to control model inputs and reporting options. Volume 3 of the GETT model documentation is the source code. The code is arranged primarily by the eight tax types. Other code files include those for JURISDICTION, SIMULATION, VALIDATION, TAXES, CHANGES, REPORTS, GILOT, and GETT. The code has been verified through hand calculations

Development of a 3-D flow analysis computer program for integral reactor

International Nuclear Information System (INIS)

Youn, H. Y.; Lee, K. H.; Kim, H. K.; Whang, Y. D.; Kim, H. C.

2003-01-01

A 3-D computational fluid dynamics program TASS-3D is being developed for the flow analysis of primary coolant system consists of complex geometries such as SMART. A pre/post processor also is being developed to reduce the pre/post processing works such as a computational grid generation, set-up the analysis conditions and analysis of the calculated results. TASS-3D solver employs a non-orthogonal coordinate system and FVM based on the non-staggered grid system. The program includes the various models to simulate the physical phenomena expected to be occurred in the integral reactor and will be coupled with core dynamics code, core T/H code and the secondary system code modules. Currently, the application of TASS-3D is limited to the single phase of liquid, but the code will be further developed including 2-phase phenomena expected for the normal operation and the various transients of the integrator reactor in the next stage

China’s R&D for Energy Efficient Buildings: Insights for U.S. Cooperation with China

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Evans, Meredydd

2010-04-01

This report includes an evaluation of China’s current activities and future direction in building energy efficiency R&D and its relevance to DOE’s R&D activities under the Building Technologies Program in the Office of Energy Efficiency and Renewable Energy. The researchers reviewed the major R&D programs in China including the so-called 973 Program, the 863 Program, and the Key Technology R&D Program1 as well as the research activities of major research institutes. The report also reviewed several relevant documents of the Chinese government, websites (including the International Energy Agency and national and local governments in China), newsletters, and financial information listed in the program documents and websites.

SLACINPT - a FORTRAN program that generates boundary data for the SLAC gun code

International Nuclear Information System (INIS)

Michel, W.L.; Hepburn, J.D.

1982-03-01

The FORTRAN program SLACINPT was written to simplify the preparation of boundary data for the SLAC gun code. In SLACINPT, the boundary is described by a sequence of straight line or arc segments. From these, the program generates the individual boundary mesh point data, required as input by the SLAC gun code

2016 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-03-09

The 2016 Annual Progress Report summarizes fiscal year 2016 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; market transformation; and Small Business Innovation Research projects.

RELAP5-3D Code Includes ATHENA Features and Models

International Nuclear Information System (INIS)

Riemke, Richard A.; Davis, Cliff B.; Schultz, Richard R.

2006-01-01

Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, SF 6 , xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5-3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper. (authors)

Results of a Technical Review of the U.S. Climate Change Technology Program's R&D Portfolio

Energy Technology Data Exchange (ETDEWEB)

Brown, Marilyn A [ORNL

2006-07-01

The U.S. Climate Change Technology Program (CCTP) is a multi-agency planning and coordinating entity, led by the U.S. Department of Energy that aims to accelerate the development and facilitate the adoption of technologies to address climate change. In late 2005, CCTP asked Oak Ridge National Laboratory and Energetics Incorporated to organize and coordinate a review of the CCTP R&D portfolio using structured workshops. Each workshop focused on one of CCTP's six strategic goals: 1.Reduce emissions from energy end-use and infrastructure 2.Reduce emissions from energy supply 3.Capture and sequester carbon dioxide 4.Reduce emissions of non-CO2 greenhouse gases (GHG) 5.Improve capabilities to measure and monitor GHG emissions 6.Bolster basic science contributions to technology development To promote meaningful dialogue while ensuring broad coverage, a group of broadly experienced professionals with expertise in fields relevant to each CCTP goal were asked to participate in the portfolio reviews and associated workshops. A total of 75 experts participated in the workshops; 60 of these participants represented non-Federal organizations. This report summarizes the findings of the workshops and the results of the Delphi assessment of the CCTP R&D portfolio.

Recent Korean R&D in Satellite Communications

Science.gov (United States)

Lee, Ho-Jin; Kim, Jae Moung; Lee, Byung-Seub; Lee, Han; Ryoo, Jang-Soo

The R&D in satellite communications in Korea has been driven mainly by KCC (Korea Communications Commission) but in a small scale compared to Korea space development program organized by MEST (Ministry of Education, Science and Technology). Public and civilian satcom sector R&D has been led mainly by ETRI with small/medium companies contrary to rare investment in private sector while military sector R&D has been orchestrated by ADD with defense industry. By the COMS (Communication, Ocean and Meteorological Satellite) experimental Ka-band payload, Korea pursues a space qualification of own technology for national infrastructure evolution as well as industrialization of space R&D results. Once COMS launched and space qualified in 2009, subsequent application experiments and new technology R&D like UHDTV will entail service and industry promotion. The payload technology is expected for the next Korean commercial satellites or for new OBP satellites. The COMS ground control system and GNSS ground station technologies are under development for COMS operation and enhanced GNSS services along with advent of Galileo respectively. Satellite broadband mobile VSAT based on DVB-S2/RCS (+M) and low profile tracking antennas have been developed for trains, ships, and planes. While APSI is developing GMR-1 based Thuraya handset functions, ETRI is designing IMT-Advanced satellite radio interface for satellite and terrestrial dual-mode handheld communication system like Japanese STICS, with universities' satellite OFDM researches. A 21GHz Ka-band higher-availability scalable HD broadcasting technology and SkyLife's hybrid satellite IPTV technology are being developed. In near term Korea will extend R&D programs to upgrade the space communication infrastructure for universal access to digital opportunity and safer daily life from disaster, and to promote space green IT industrialization, national security, and space resources sovereign. Japanese stakeholders are invited to establish

PCRELAP5: data calculation program for RELAP 5 code

International Nuclear Information System (INIS)

Silvestre, Larissa Jacome Barros

2016-01-01

Nuclear accidents in the world led to the establishment of rigorous criteria and requirements for nuclear power plant operations by the international regulatory bodies. By using specific computer programs, simulations of various accidents and transients likely to occur at any nuclear power plant are required for certifying and licensing a nuclear power plant. Based on this scenario, some sophisticated computational tools have been used such as the Reactor Excursion and Leak Analysis Program (RELAP5), which is the most widely used code for the thermo-hydraulic analysis of accidents and transients in nuclear reactors in Brazil and worldwide. A major difficulty in the simulation by using RELAP5 code is the amount of information required for the simulation of thermal-hydraulic accidents or transients. The preparation of the input data requires a great number of mathematical operations to calculate the geometry of the components. Thus, for those calculations performance and preparation of RELAP5 input data, a friendly mathematical preprocessor was designed. The Visual Basic for Application (VBA) for Microsoft Excel demonstrated to be an effective tool to perform a number of tasks in the development of the program. In order to meet the needs of RELAP5 users, the RELAP5 Calculation Program (Programa de Calculo do RELAP5 - PCRELAP5) was designed. The components of the code were codified; all entry cards including the optional cards of each one have been programmed. In addition, an English version for PCRELAP5 was provided. Furthermore, a friendly design was developed in order to minimize the time of preparation of input data and errors committed by users. In this work, the final version of this preprocessor was successfully applied for Safety Injection System (SIS) of Angra 2. (author)

FY2014 Energy Storage R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

none,

2015-03-01

The Energy Storage research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush. This report describes the progress made on the research and development projects funded by the Energy Storage subprogram in 2014. You can download individual sections at the following website, http://energy.gov/eere/vehicles/downloads/vehicle-technologies-office-2014-energy-storage-rd-annual-report.

DYNA3D2000*, Explicit 3-D Hydrodynamic FEM Program

International Nuclear Information System (INIS)

Lin, J.

2002-01-01

1 - Description of program or function: DYNA3D2000 is a nonlinear explicit finite element code for analyzing 3-D structures and solid continuum. The code is vectorized and available on several computer platforms. The element library includes continuum, shell, beam, truss and spring/damper elements to allow maximum flexibility in modeling physical problems. Many materials are available to represent a wide range of material behavior, including elasticity, plasticity, composites, thermal effects and rate dependence. In addition, DYNA3D has a sophisticated contact interface capability, including frictional sliding, single surface contact and automatic contact generation. 2 - Method of solution: Discretization of a continuous model transforms partial differential equations into algebraic equations. A numerical solution is then obtained by solving these algebraic equations through a direct time marching scheme. 3 - Restrictions on the complexity of the problem: Recent software improvements have eliminated most of the user identified limitations with dynamic memory allocation and a very large format description that has pushed potential problem sizes beyond the reach of most users. The dominant restrictions remain in code execution speed and robustness, which the developers constantly strive to improve

The Need for an R&D and Upgrade Program for CMS Software and Computing

CERN Document Server

Elmer, Peter; Stenson, Kevin; Wittich, Peter

2013-01-01

Over the next ten years, the physics reach of the Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN) will be greatly extended through increases in the instantaneous luminosity of the accelerator and large increases in the amount of collected data. Due to changes in the way Moore's Law computing performance gains have been realized in the past decade, an aggressive program of R&D is needed to ensure that the computing capability of CMS will be up to the task of collecting and analyzing this data.

Malaria and fetal growth alterations in the 3(rd) trimester of pregnancy

DEFF Research Database (Denmark)

Schmiegelow, Christentze; Minja, Daniel Thomas; Oesterholt, Mayke

2013-01-01

Pregnancy associated malaria is associated with decreased birth weight, but in-utero evaluation of fetal growth alterations is rarely performed. The objective of this study was to investigate malaria induced changes in fetal growth during the 3(rd) trimester using trans-abdominal ultrasound....

2010 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2010-12-01

This report summarizes comments from the Peer Review Panel at the 2010 DOE Hydrogen Program Annual Merit Review, held on June 7-11, 2010, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; and systems analysis.

2009 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

Satyapal, S. [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2009-10-01

This report summarizes comments from the Peer Review Panel at the 2009 DOE Hydrogen Program Annual Merit Review, held on May 18-22, 2009, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; education; safety, codes, and standards; technology validation; systems analysis; and manufacturing R&D.

Development of An Automatic Verification Program for Thermal-hydraulic System Codes

Energy Technology Data Exchange (ETDEWEB)

Lee, J. Y.; Ahn, K. T.; Ko, S. H.; Kim, Y. S.; Kim, D. W. [Pusan National University, Busan (Korea, Republic of); Suh, J. S.; Cho, Y. S.; Jeong, J. J. [System Engineering and Technology Co., Daejeon (Korea, Republic of)

2012-05-15

As a project activity of the capstone design competitive exhibition, supported by the Education Center for Green Industry-friendly Fusion Technology (GIFT), we have developed a computer program which can automatically perform non-regression test, which is needed repeatedly during a developmental process of a thermal-hydraulic system code, such as the SPACE code. A non-regression test (NRT) is an approach to software testing. The purpose of the non-regression testing is to verify whether, after updating a given software application (in this case, the code), previous software functions have not been compromised. The goal is to prevent software regression, whereby adding new features results in software bugs. As the NRT is performed repeatedly, a lot of time and human resources will be needed during the development period of a code. It may cause development period delay. To reduce the cost and the human resources and to prevent wasting time, non-regression tests need to be automatized. As a tool to develop an automatic verification program, we have used Visual Basic for Application (VBA). VBA is an implementation of Microsoft's event-driven programming language Visual Basic 6 and its associated integrated development environment, which are built into most Microsoft Office applications (In this case, Excel)

Development of An Automatic Verification Program for Thermal-hydraulic System Codes

International Nuclear Information System (INIS)

Lee, J. Y.; Ahn, K. T.; Ko, S. H.; Kim, Y. S.; Kim, D. W.; Suh, J. S.; Cho, Y. S.; Jeong, J. J.

2012-01-01

As a project activity of the capstone design competitive exhibition, supported by the Education Center for Green Industry-friendly Fusion Technology (GIFT), we have developed a computer program which can automatically perform non-regression test, which is needed repeatedly during a developmental process of a thermal-hydraulic system code, such as the SPACE code. A non-regression test (NRT) is an approach to software testing. The purpose of the non-regression testing is to verify whether, after updating a given software application (in this case, the code), previous software functions have not been compromised. The goal is to prevent software regression, whereby adding new features results in software bugs. As the NRT is performed repeatedly, a lot of time and human resources will be needed during the development period of a code. It may cause development period delay. To reduce the cost and the human resources and to prevent wasting time, non-regression tests need to be automatized. As a tool to develop an automatic verification program, we have used Visual Basic for Application (VBA). VBA is an implementation of Microsoft's event-driven programming language Visual Basic 6 and its associated integrated development environment, which are built into most Microsoft Office applications (In this case, Excel)

3rd Circuit hints it may reconsider McNemar reasoning.

Science.gov (United States)

1997-10-17

The [name removed] v. The Disney Store ruling is under criticism and the 3rd U.S. Circuit Court of Appeals may reconsider its 1996 decision to not allow employees who receive disability benefits to sue under the Americans with Disabilities Act (ADA). A panel of 3rd Circuit judges, working on [name removed] v. American Sterilizer Co., asserts that the [name removed] decision should not be used to assume that an individual's ADA claims are barred because of prior representations of disability. [Name removed] is suing American Sterilizer under the retaliation provisions of the ADA. Other courts are criticizing the [name removed] decision, including the District of Columbia Court in [name removed] v. Washington Metropolitan Area Transit Authority. The [name removed] court assets that a statement made in the context of a disability application does not preclude an ADA claim brought by a worker for illegal discrimination because the ADA and the Social Security Act differ in their statutory intent. AIDS advocates state that the [name removed] decision places a plaintiff in the position of having to choose between asserting a legal right or maintaining an income. Alan Epstein, who represented [name removed], is pleased by the criticism but explains that [name removed], who died this summer, will not be vindicated.

3rd Conference on Ignition Systems for Gasoline Engines

CERN Document Server

Sens, Marc

2017-01-01

The volume includes selected and reviewed papers from the 3rd Conference on Ignition Systems for Gasoline Engines in Berlin in November 2016. Experts from industry and universities discuss in their papers the challenges to ignition systems in providing reliable, precise ignition in the light of a wide spread in mixture quality, high exhaust gas recirculation rates and high cylinder pressures. Classic spark plug ignition as well as alternative ignition systems are assessed, the ignition system being one of the key technologies to further optimizing the gasoline engine.

R&D Incentives for Neglected Diseases

Science.gov (United States)

Dimitri, Nicola

2012-01-01

Neglected diseases are typically characterized as those for which adequate drug treatment is lacking, and the potential return on effort in research and development (R&D), to produce new therapies, is too small for companies to invest significant resources in the field. In recent years various incentives schemes to stimulate R&D by pharmaceutical firms have been considered. Broadly speaking, these can be classified either as ‘push’ or ‘pull’ programs. Hybrid options, that include push and pull incentives, have also become increasingly popular. Supporters and critics of these various incentive schemes have argued in favor of their relative merits and limitations, although the view that no mechanism is a perfect fit for all situations appears to be widely held. For this reason, the debate on the advantages and disadvantages of different approaches has been important for policy decisions, but is dispersed in a variety of sources. With this in mind, the aim of this paper is to contribute to the understanding of the economic determinants behind R&D investments for neglected diseases by comparing the relative strength of different incentive schemes within a simple economic model, based on the assumption of profit maximizing firms. The analysis suggests that co-funded push programs are generally more efficient than pure pull programs. However, by setting appropriate intermediate goals hybrid incentive schemes could further improve efficiency. PMID:23284648

R&D incentives for neglected diseases.

Directory of Open Access Journals (Sweden)

Nicola Dimitri

Full Text Available Neglected diseases are typically characterized as those for which adequate drug treatment is lacking, and the potential return on effort in research and development (R&D, to produce new therapies, is too small for companies to invest significant resources in the field. In recent years various incentives schemes to stimulate R&D by pharmaceutical firms have been considered. Broadly speaking, these can be classified either as 'push' or 'pull' programs. Hybrid options, that include push and pull incentives, have also become increasingly popular. Supporters and critics of these various incentive schemes have argued in favor of their relative merits and limitations, although the view that no mechanism is a perfect fit for all situations appears to be widely held. For this reason, the debate on the advantages and disadvantages of different approaches has been important for policy decisions, but is dispersed in a variety of sources. With this in mind, the aim of this paper is to contribute to the understanding of the economic determinants behind R&D investments for neglected diseases by comparing the relative strength of different incentive schemes within a simple economic model, based on the assumption of profit maximizing firms. The analysis suggests that co-funded push programs are generally more efficient than pure pull programs. However, by setting appropriate intermediate goals hybrid incentive schemes could further improve efficiency.

R&D incentives for neglected diseases.

Science.gov (United States)

Dimitri, Nicola

2012-01-01

Neglected diseases are typically characterized as those for which adequate drug treatment is lacking, and the potential return on effort in research and development (R&D), to produce new therapies, is too small for companies to invest significant resources in the field. In recent years various incentives schemes to stimulate R&D by pharmaceutical firms have been considered. Broadly speaking, these can be classified either as 'push' or 'pull' programs. Hybrid options, that include push and pull incentives, have also become increasingly popular. Supporters and critics of these various incentive schemes have argued in favor of their relative merits and limitations, although the view that no mechanism is a perfect fit for all situations appears to be widely held. For this reason, the debate on the advantages and disadvantages of different approaches has been important for policy decisions, but is dispersed in a variety of sources. With this in mind, the aim of this paper is to contribute to the understanding of the economic determinants behind R&D investments for neglected diseases by comparing the relative strength of different incentive schemes within a simple economic model, based on the assumption of profit maximizing firms. The analysis suggests that co-funded push programs are generally more efficient than pure pull programs. However, by setting appropriate intermediate goals hybrid incentive schemes could further improve efficiency.

Verification of the MOTIF code version 3.0

International Nuclear Information System (INIS)

Chan, T.; Guvanasen, V.; Nakka, B.W.; Reid, J.A.K.; Scheier, N.W.; Stanchell, F.W.

1996-12-01

As part of the Canadian Nuclear Fuel Waste Management Program (CNFWMP), AECL has developed a three-dimensional finite-element code, MOTIF (Model Of Transport In Fractured/ porous media), for detailed modelling of groundwater flow, heat transport and solute transport in a fractured rock mass. The code solves the transient and steady-state equations of groundwater flow, solute (including one-species radionuclide) transport, and heat transport in variably saturated fractured/porous media. The initial development was completed in 1985 (Guvanasen 1985) and version 3.0 was completed in 1986. This version is documented in detail in Guvanasen and Chan (in preparation). This report describes a series of fourteen verification cases which has been used to test the numerical solution techniques and coding of MOTIF, as well as demonstrate some of the MOTIF analysis capabilities. For each case the MOTIF solution has been compared with a corresponding analytical or independently developed alternate numerical solution. Several of the verification cases were included in Level 1 of the International Hydrologic Code Intercomparison Project (HYDROCOIN). The MOTIF results for these cases were also described in the HYDROCOIN Secretariat's compilation and comparison of results submitted by the various project teams (Swedish Nuclear Power Inspectorate 1988). It is evident from the graphical comparisons presented that the MOTIF solutions for the fourteen verification cases are generally in excellent agreement with known analytical or numerical solutions obtained from independent sources. This series of verification studies has established the ability of the MOTIF finite-element code to accurately model the groundwater flow and solute and heat transport phenomena for which it is intended. (author). 20 refs., 14 tabs., 32 figs

Development of a coupled code system based on system transient code, RETRAN, and 3-D neutronics code, MASTER

International Nuclear Information System (INIS)

Kim, K. D.; Jung, J. J.; Lee, S. W.; Cho, B. O.; Ji, S. K.; Kim, Y. H.; Seong, C. K.

2002-01-01

A coupled code system of RETRAN/MASTER has been developed for best-estimate simulations of interactions between reactor core neutron kinetics and plant thermal-hydraulics by incorporation of a 3-D reactor core kinetics analysis code, MASTER into system transient code, RETRAN. The soundness of the consolidated code system is confirmed by simulating the MSLB benchmark problem developed to verify the performance of a coupled kinetics and system transient codes by OECD/NEA

FARGO3D: A NEW GPU-ORIENTED MHD CODE

Energy Technology Data Exchange (ETDEWEB)

Benitez-Llambay, Pablo [Instituto de Astronomía Teórica y Experimental, Observatorio Astronónomico, Universidad Nacional de Córdoba. Laprida 854, X5000BGR, Córdoba (Argentina); Masset, Frédéric S., E-mail: pbllambay@oac.unc.edu.ar, E-mail: masset@icf.unam.mx [Instituto de Ciencias Físicas, Universidad Nacional Autónoma de México (UNAM), Apdo. Postal 48-3,62251-Cuernavaca, Morelos (Mexico)

2016-03-15

We present the FARGO3D code, recently publicly released. It is a magnetohydrodynamics code developed with special emphasis on the physics of protoplanetary disks and planet–disk interactions, and parallelized with MPI. The hydrodynamics algorithms are based on finite-difference upwind, dimensionally split methods. The magnetohydrodynamics algorithms consist of the constrained transport method to preserve the divergence-free property of the magnetic field to machine accuracy, coupled to a method of characteristics for the evaluation of electromotive forces and Lorentz forces. Orbital advection is implemented, and an N-body solver is included to simulate planets or stars interacting with the gas. We present our implementation in detail and present a number of widely known tests for comparison purposes. One strength of FARGO3D is that it can run on either graphical processing units (GPUs) or central processing units (CPUs), achieving large speed-up with respect to CPU cores. We describe our implementation choices, which allow a user with no prior knowledge of GPU programming to develop new routines for CPUs, and have them translated automatically for GPUs.

PASC-1, Petten AMPX-II/SCALE-3 Code System for Reactor Neutronics Calculation

International Nuclear Information System (INIS)

Yaoqing, W.; Oppe, J.; Haas, J.B.M. de; Gruppelaar, H.; Slobben, J.

1995-01-01

1 - Description of program or function: The Petten AMPX-II/SCALE-3 Code System PASC-1 is a reactor neutronics calculation programme system consisting of well known IBM-oriented codes, that have been translated into FORTRAN-77, for calculations on a CDC-CYBER computer. Thus, the portability of these codes has been increased. In this system, some AMPX-II and SCALE-3 modules, the one-dimensional transport code ANISN and the 1 to 3-dimensional diffusion code CITATION are linked together on the CDC-CYBER/855 computer. The new cell code XSDRNPM-S and the old XSDRN code are included in the system. Starting from an AMPX fine group library up to CITATION, calculations can be performed for each individual module. Existing AMPX master interface format libraries, such as CSRL-IV, JEF-1, IRI and SCALE-45, and the old XSDRN-formatted libraries such as the COBB library can be used for the calculations. The code system contains the following modules and codes at present: AIM, AJAX, MALOCS, NITAWL-S, REVERT-I, ICE-2, CONVERT, JUAN, OCTAGN, XSDRNPM-S, XSDRN, ANISN and CITATION. The system will be extended with other SCALE modules and transport codes. 2 - Method of solution: The PASC-1 system is based on AMPX-II/SCALE-3 modules. Except for some SCALE-3 modules taken from the SCALIAS package, the original AMPX-II modules were IBM versions written in FORTRAN IV. These modules have been translated into CDC FORTRAN V. In order to test these modules and link them with some codes, some of the sample problem calculations have been performed for the whole PASC-1 system. During these calculations, some FORTRAN-77 errors were found in MALOCS, REVERT, CONVERT and some subroutines of SUBLIB (FORTRAN-77 subroutine library). These errors have been corrected. Because many corrections were made for the REVERT module, it is renamed as REVERT-I (improved version of REVERT). After these corrections, the whole system is running on a CDC-CYBER Computer (NOS-BE operating system). 3 - Restrictions on the

Status of the French R/D program on the severe accident issue to develop Gen IV SFRs - 15373

International Nuclear Information System (INIS)

Serre, F.; Bertrand, F.; Journeau, C.; Suteau, C.; Verwaede, D.; Schmitt, D.; Farges, B.

2015-01-01

The ASTRID reactor (Advanced Sodium Technological Reactor for Industrial Demonstration) is a technological demonstrator designed by the CEA with its industrial partners, with very high levels of requirements. In the ASTRID project, the safety objectives are to prevent core melting, in particular by the development of an innovative core with complementary safety prevention devices, and to enhance the reactor resistance to severe accident by design. To mitigate the consequences of hypothetical core melting situations, specific dispositions or mitigation devices will be added to the core and to the reactor. It is also required to provide a robust safety demonstration (with high level of confidence). Therefore a new approach for severe accident issue has been defined: to the well-known 'lines of defense' method, a 'lines of mitigation' method is added. To meet these ASTRID, or future SFR, requirements, a large R/D program was launched in the Severe Accident domain, with a large number of partners. This paper will present the status of the CEA R/D related to the SFR Severe Accident issue, the collaboration framework (with industrial partners and R/D foreign organizations), and the future R/D plans to support the ASTRID project and possible developments for future Gen IV commercial SFR. (authors)

GPU-accelerated 3D neutron diffusion code based on finite difference method

Energy Technology Data Exchange (ETDEWEB)

Xu, Q.; Yu, G.; Wang, K. [Dept. of Engineering Physics, Tsinghua Univ. (China)

2012-07-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

GPU-accelerated 3D neutron diffusion code based on finite difference method

International Nuclear Information System (INIS)

Xu, Q.; Yu, G.; Wang, K.

2012-01-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

FY2013 Energy Storage R&D Progress Report

Energy Technology Data Exchange (ETDEWEB)

none,

2014-02-01

The FY 2013 Progress Report for Energy Storage R&D focuses on advancing the development of batteries to enable a large market penetration of hybrid and electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush.

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

International Nuclear Information System (INIS)

Salmela, Olli

2005-01-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

Energy Technology Data Exchange (ETDEWEB)

Salmela, Olli [Nokia Networks, P.O. Box 301, 00045 Nokia Group (Finland)]. E-mail: olli.salmela@nokia.com

2005-08-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered.

3D neutronic codes coupled with thermal-hydraulic system codes for PWR, and BWR and VVER reactors

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Velkov, K. [GRS, Garching (Germany); Lizorkin, M. [Kurchatov-Institute, Moscow (Russian Federation)] [and others

1997-07-01

This paper describes the objectives of code development for coupling 3D neutronics codes with thermal-hydraulic system codes. The present status of coupling ATHLET with three 3D neutronics codes for VVER- and LWR-reactors is presented. After describing the basic features of the 3D neutronic codes BIPR-8 from Kurchatov-Institute, DYN3D from Research Center Rossendorf and QUABOX/CUBBOX from GRS, first applications of coupled codes for different transient and accident scenarios are presented. The need of further investigations is discussed.

Risk taking and effective R&D management.

Science.gov (United States)

Banholzer, William F; Vosejpka, Laura J

2011-01-01

Several key strategies can be used to manage the risk associated with innovation to create maximum value. These include balancing the timing of investments versus cash flows, management of fads, prioritization across the company, savvy portfolio management, and a system of metrics that measure real success. Successful R&D managers will do whatever is necessary to manage the risks associated with an R&D program and stick to their long-term strategy.

Qualification of FEAST 3.0 and FEAT 4.0 computer codes

International Nuclear Information System (INIS)

Xu, Z.; Lai, L.; Sim, K.-S.; Huang, F.; Wong, B.

2005-01-01

FEAST (Finite Element Analysis for Stresses) is an AECL computer code used to assess the structural integrity of the CANDU fuel element. FEAST models the thermo-elastic, thermo-elasto-plastic and creep deformations in CANDU fuel. FEAT (Finite Element Analysis for Temperature) is another AECL computer code and is used to assess the thermal integrity of fuel elements. FEAT models the steady-state and transient heat flows in CANDU fuel, under conditions such as flux depression, end flux peaking, temperature-dependent thermal conductivity, and non-uniform time-dependent boundary conditions. Both computer programs are used in design and qualification analyses of CANDU fuel. Formal qualifications (including coding verification and validation) of both codes were performed, in accordance with AECL software quality assurance (SQA) manual and procedures that are consistent with CSA N286.7-99. Validation of FEAST 3.0 shows very good agreement with independent analytical solutions or measurements. Validation of FEAT 4.0 also shows very good agreement with independent WIMS-AECL calculations, analytical solutions, ANSYS calculations and measurement. (author)

Qualification of FEAST 3.0 and FEAT 4.0 computer codes

Energy Technology Data Exchange (ETDEWEB)

Xu, Z.; Lai, L.; Sim, K.-S.; Huang, F.; Wong, B. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada)

2005-07-01

FEAST (Finite Element Analysis for Stresses) is an AECL computer code used to assess the structural integrity of the CANDU fuel element. FEAST models the thermo-elastic, thermo-elasto-plastic and creep deformations in CANDU fuel. FEAT (Finite Element Analysis for Temperature) is another AECL computer code and is used to assess the thermal integrity of fuel elements. FEAT models the steady-state and transient heat flows in CANDU fuel, under conditions such as flux depression, end flux peaking, temperature-dependent thermal conductivity, and non-uniform time-dependent boundary conditions. Both computer programs are used in design and qualification analyses of CANDU fuel. Formal qualifications (including coding verification and validation) of both codes were performed, in accordance with AECL software quality assurance (SQA) manual and procedures that are consistent with CSA N286.7-99. Validation of FEAST 3.0 shows very good agreement with independent analytical solutions or measurements. Validation of FEAT 4.0 also shows very good agreement with independent WIMS-AECL calculations, analytical solutions, ANSYS calculations and measurement. (author)

3rd International Conference Nanotechnology and Nanomaterials

CERN Document Server

Yatsenko, Leonid

2016-01-01

This book presents some of the latest achievements in nanotechnology and nanomaterials from leading researchers in Ukraine, Europe, and beyond. It features contributions from participants in the 3rd International Science and Practice Conference Nanotechnology and Nanomaterials (NANO2015) held in Lviv, Ukraine on August 26-30, 2015. The International Conference was organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), Ivan Franko National University of Lviv (Ukraine), University of Turin (Italy), Pierre and Marie Curie University (France), and European Profiles A.E. (Greece). Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results on topics ranging from nanooptics, nanoplasmonics, and interface studies to energy storage and biomedical applications. Presents cutting-edge advances in nanocomposites and carbon and silicon-based nanomaterials for a wide range of engine...

Effectiveness of public support for R&D and entrepreneurship

NARCIS (Netherlands)

Mohnen, P.

2017-01-01

The papers by Dortet-Bernadet and Sicsic and by Redor in this issue examine respectively the success of R&D financial support programs in stimulating private R&D and the success of subsidized start-ups for the unemployed in creating long-lasting firms. Both papers focus on small French firms. Both

U.S. FUEL CYCLE TECHNOLOGIES R&D PROGRAM FOR NEXT GENERATION NUCLEAR MATERIALS MANAGEMENT

Directory of Open Access Journals (Sweden)

M.C. MILLER

2013-11-01

Full Text Available The U.S. Department of Energy's Fuel Cycle Technologies R&D program under the Office of Nuclear Energy is working to advance technologies to enhance both the existing and future fuel cycles. One thrust area is in developing enabling technologies for next generation nuclear materials management under the Materials Protection, Accounting and Control Technologies (MPACT Campaign where advanced instrumentation, analysis and assessment methods, and security approaches are being developed under a framework of Safeguards and Security by Design. An overview of the MPACT campaign's activities and recent accomplishments is presented along with future plans.

Proceedings of the 3rd Symposium on Engineering Sciences

International Nuclear Information System (INIS)

Ahmed, J.; Rizvi, S.Z.H.; Ahmad, R.; Saleem, M.

2010-01-01

The 3rd symposium on engineering sciences was held from March 10-12, 2010 in Lahore, Pakistan. More than twenty academic institutions and six industries participated in this conference. The foreign and Pakistani experts delivered their keynotes talk, contributor lectures and poster presentation on the conference topics. In three days of the symposium, Fifty four papers presented on different topics of Engineering Sciences including chemical engineering, energy engineering, metallurgy engineering, material engineering and electrical engineering. This symposium provided an ideal opportunity for exchange of information amongst scientists, engineers and researchers from all over Pakistan and other countries of the world. (A.B)

Study and application of the ANISN and DOT 3.5 codes to problems in nuclear radiation shielding

International Nuclear Information System (INIS)

Otto, A.C.

1983-01-01

The application of the Sn transport codes ANISN and DOT 3.5 to problems in radiation shielding is reviewed. In addition, a large array of codes involved in radiation shielding calculations is described and applied in this work. The ANISN and DOT 3.5 codes solve the multigroup transport equation in plane, cylindrical and spherical geometries, the first in one dimension and the second in two dimensions, by using the Sn approximation and were designed to solve coupled neutron-photon transport problems commonly found in reactor shielding calculations. In this work the numerical methods used in these codes are reviewed and their basic application to deep-penetration and void problems is discussed. Benchmark problems are solved by employing the array of codes previously mentioned. In particular, the ability of the ISOFLUXO program coupled to the DOT 3.5 code of mapping contours of regions with approximately the same scalar fluxes is illustrated, showing that they can be efficiently used in shielding analysis. (Author) [pt

TMAP/Mod 1: Tritium Migration Analysis Program code description and user's manual

International Nuclear Information System (INIS)

Merrill, B.J.; Jones, J.L.; Holland, D.F.

1986-01-01

The Tritium Migration Analysis Program (TMAP) has been developed by the Fusion Safety Program of EG and G Idaho, Inc., at the Idaho National Engineering Laboratory (INEL) as a safety analysis code to analyze tritium loss from fusion systems during normal operation and under accident conditions. TMAP is a one-dimensional code that determines tritium movement and inventories in a system of interconnected enclosures and wall structures. In addition, the thermal response of structures is modeled to provide temperature information required for calculations of tritium movement. The program is written in FORTRAN 4 and has been implemented on the National Magnetic Fusion Energy Computing Center (NMFECC)

Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

International Nuclear Information System (INIS)

Dunn, F.E.

1981-01-01

The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

Software engineering techniques and CASE tools in RD13

Science.gov (United States)

Buono, S.; Gaponenko, I.; Jones, R.; Khodabandeh, A.; Mapelli, L.; Mornacchi, G.; Prigent, D.; Sanchez-Corral, E.; Skiadelli, M.; Toppers, A.; Duval, P. Y.; Ferrato, D.; Le Van Suu, A.; Qian, Z.; Rondot, C.; Ambrosini, G.; Fumagalli, G.; Polesello, G.; Aguer, M.; Huet, M.

1994-12-01

The RD13 project was approved in April 1991 for the development of a scalable data-taking system suitable for hosting various LHC studies. One of its goals is the exploitation of software engineering techniques, in order to indicate their overall suitability for data acquisition (DAQ), software design and implementation. This paper describes how such techniques have been applied to the development of components of the RD13 DAQ used in test-beam runs at CERN. We describe our experience with the Artifex CASE tool and its associated methodology. The issues raised when code generated by a CASE tool has to be integrated into an existing environment are also discussed.

SCDAP/RELAP5/MOD3 code development

International Nuclear Information System (INIS)

Allison, C.M.; Siefken, J.L.; Coryell, E.W.

1992-01-01

The SCOAP/RELAP5/MOD3 computer code is designed to describe the overall reactor coolant system (RCS) thermal-hydraulic response, core damage progression, and fission product release and transport during severe accidents. The code is being developed at the Idaho National Engineering Laboratory (INEL) under the primary sponsorship of the Office of Nuclear Regulatory Research of the US Nuclear Regulatory Commission (NRC). Code development activities are currently focused on three main areas - (a) code usability, (b) early phase melt progression model improvements, and (c) advanced reactor thermal-hydraulic model extensions. This paper describes the first two activities. A companion paper describes the advanced reactor model improvements being performed under RELAP5/MOD3 funding

MINI-TRAC code: a driver program for assessment of constitutive equations of two-fluid model

International Nuclear Information System (INIS)

Akimoto, Hajime; Abe, Yutaka; Ohnuki, Akira; Murao, Yoshio

1991-05-01

MINI-TRAC code, a driver program for assessment of constitutive equations of two-fluid model, has been developed to perform assessment and improvement of constitutive equations of two-fluid model widely and efficiently. The MINI-TRAC code uses one-dimensional conservation equations for mass, momentum and energy based on the two-fluid model. The code can work on a personal computer because it can be operated with a core memory size less than 640 KB. The MINI-TRAC code includes constitutive equations of TRAC-PF1/MOD1 code, TRAC-BF1 code and RELAP5/MOD2 code. The code is modulated so that one can easily change constitutive equations to perform a test calculation. This report is a manual of the MINI-TRAC code. The basic equations, numerics, constitutive, equations included in the MINI-TRAC code will be described. The user's manual such as input description will be presented. The program structure and contents of main variables will also be mentioned in this report. (author)

Validation of the REL2005 code package on Gd-poisoned PWR type assemblies through the CAMELEON experimental program

International Nuclear Information System (INIS)

Blaise, Patrick; Vidal, Jean-Francois; Santamarina, Alain

2009-01-01

This paper details the validation of Gd-poisoned 17x17 PWR lattices, through several configurations of the CAMELEON experimental program, by using the newly qualified REL2005 French code package. After a general presentation of the CAMELEON program that took place in the EOLE critical Facility in Cadarache, one describes the new REL2005 code package relying on the deterministic transport code APOLLO2.8 based on characteristics method (MOC), and its new CEA2005 library based on the latest JEFF-3.1.1 nuclear data evaluation. For critical masses, the average Calculation-to-Experiment C/E's on the k eff are (136 ± 80) pcm and (300 ± 76) pcm for the reference 281 groups MOC and optimized 26 groups MOC schemes respectively. These values include also a drastic improvement of about 250 pcm due to the change in the library from JEF2.2 to JEFF3.1. For pin-by-pin radial power distributions, reference and REL2005 results are very close, with maximum discrepancies of the order of 2%, i.e., in the experimental uncertainty limits. The Optimized REL2005 code package allows to predict the reactivity worth of the Gd-clusters (averaged on 9 experimental configurations) to be C/E Δρ(Gd clusters) = +1.3% ± 2.3%. (author)

Automatic generation of data merging program codes.

OpenAIRE

Hyensook, Kim; Oussena, Samia; Zhang, Ying; Clark, Tony

2010-01-01

Data merging is an essential part of ETL (Extract-Transform-Load) processes to build a data warehouse system. To avoid rewheeling merging techniques, we propose a Data Merging Meta-model (DMM) and its transformation into executable program codes in the manner of model driven engineering. DMM allows defining relationships of different model entities and their merging types in conceptual level. Our formalized transformation described using ATL (ATLAS Transformation Language) enables automatic g...

Influence of radiofrequency-electromagnetic waves from 3rd-generation cellular phones on fertilization and embryo development in mice.

Science.gov (United States)

Suzuki, Satoshi; Okutsu, Miho; Suganuma, Ryota; Komiya, Hiromi; Nakatani-Enomoto, Setsu; Kobayashi, Shunsuke; Ugawa, Yoshikazu; Tateno, Hiroyuki; Fujimori, Keiya

2017-09-01

The purpose of this study was to evaluate the effects of 3rd-generation (3G) cellular phone radiofrequency-electromagnetic wave (RF-EMW) exposure on fertilization and embryogenesis in mice. Oocytes and spermatozoa were exposed to 3G cellular phone RF-EMWs, 1.95 GHz wideband code division multiple access, at a specific absorption rate of 2 mW/g for 60 min, or to sham exposure. After RF-EMW exposure, in vitro fertilization and intracytoplasmic sperm injection were performed. Rates of fertilization, embryogenesis (8-cell embryo, blastocyst), and chromosome aberration were compared between the combined spermatozoa and oocyte groups: both exposed, both non-exposed, one exposed, and the other non-exposed. Rates of fertilization, embryogenesis, and blastocyst formation did not change significantly across the four groups. Considering that the degree of exposure in the present study was ≥100 times greater than daily exposure of human spermatozoa and even greater than daily exposure of oocytes, the present results indicate safety of RF-EMW exposure in humans. Bioelectromagnetics. 38:466-473, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

GUI2QAD-3D: A graphical interface program for QAD-CGPIC program

International Nuclear Information System (INIS)

Subbaiah, K.V.; Sarangapani, R.

2006-01-01

GUI2QAD-3D is graphical user interface developed in Visual Basic (VB) version 6.0 to prepare input for the QAD-CGPIC program. QAD-CGPIC is a FORTRAN code that combines QAD-CGGP (RSICC-CCC-493, USA) and PICTURE [Irving, D.C., Morrison, G.W., 1970. PICTURE-an aid in debugging GEOM input data, ORNL-TM-2892] for neutron and gamma-ray shielding calculations by the point kernel method in a consistent fashion to utilize the capabilities of two independent codes. The FORTRAN code calculates fast neutron and gamma-ray penetration through various shield configurations defined by combinatorial geometry specifications. It has provision to estimate buildup factor either from Geometric Progression (GP) coefficients (ANS-6.4.3, 1990) or from Capos'. Capabilities of the FORTRAN code is extended by modifying it to handle off-centred multiple identical sources. Several standard tests of inputs are carried out to validate the modified code. The FORTRAN code executable is created with a Lahey compiler. The user interface facilitates interactive viewing of the geometry of the system with online context sensitive help. Inputs for several practical problems relating to nuclear fuel reprocessing labs are provided. The software runs on Pentium III computers under windows environment and is transmitted in one CD. The software can be obtained from Radiation Safety Information and Computational Centre (RSICC), ORNL, USA with code package identification number CCC-697

Therapeutic targeting of non-coding RNAs in cancer

Czech Academy of Sciences Publication Activity Database

Slabý, O.; Laga, Richard; Sedláček, Ondřej

2017-01-01

Roč. 474, č. 24 (2017), s. 4219-4251 ISSN 0264-6021 R&D Projects: GA MŠk(CZ) LQ1604; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:61389013 Keywords : non-coding RNA * RNA delivery * polymer carriers Subject RIV: EB - Genetics ; Molecular Biology OBOR OECD: Biochemical research methods Impact factor: 3.797, year: 2016

New developments in program STANSOL version 3

International Nuclear Information System (INIS)

Gray, W.H.

1981-10-01

STANSOL is a computer program that applied a solution for the mechanical displacement, stress, and strain in rotationally-transversely isotropic, homogeneous, axisymmetric solenoids. Careful application of the solution permits the complex mechanical behavior of multilayered, nonhomogeneous solenoids to be examined in which the loads may vary arbitrarily from layer to layer. Loads applied to the solenoid model by program STANSOL may consist of differential temperature, winding preload, internal and/or external surface pressure, and electromagnetic Lorentz body forces. STANSOL version 3, the latest update to the original version of the computer program, also permits structural analysis of solenoid magnets in which frictionless interlayer gaps may open or close. This paper presents the new theory coded into version 3 of the STANSOL program, as well as the new input data format and graphical output display of the resulting analysis

Coupling of RELAP5-3D and GAMMA codes for Nuclear Hydrogen System Analysis

International Nuclear Information System (INIS)

Jin, Hyung Gon

2007-02-01

RELAP5-3D is one of the most important system analysis codes in nuclear field, which has been developed for best-estimate transient simulation of light water reactor coolant systems during postulated accidents. The GAMMA code is a multi-dimensional multi-component mixture analysis code with the complete set of chemical reaction models which is developed for safety analysis of HTGR (High Temperature Gas Cooled Reactor) air-ingress. The two codes, RELAP5-3D and GAMMA, are coupled to be used for nuclear-hydrogen system analysis, which requires the capability of the analysis of multi-component gas mixture and two-phase flow. In order to couple the two codes, 4 steps are needed. Before coupling, the GAMMA code was transformed into DLL (dynamic link liberally) from executive type and RELAP5-3D was recompiled into Compaq Visual Fortran environments for our debugging purpose. As the second step, two programs - RELAP5-3D and GAMMA codes - must be synchronized in terms of time and time step. Based on that time coupling, the coupled code can calculate simultaneously. Time-step coupling had been accomplished successfully and it is tested by using a simple test input. As a next step, source-term coupling was done and it was also tested in two different test inputs. The fist case is a simple test condition, which has no chemical reaction. And the other test set is the chemical reaction model, including four non-condensable gas species, which are He, O2, CO, CO2. Finally, in order to analyze combined cycle system, heat-flux coupling has been made and a simple heat exchanger model was demonstrated

A new algorithm for coding geological terminology

Science.gov (United States)

Apon, W.

The Geological Survey of The Netherlands has developed an algorithm to convert the plain geological language of lithologic well logs into codes suitable for computer processing and link these to existing plotting programs. The algorithm is based on the "direct method" and operates in three steps: (1) searching for defined word combinations and assigning codes; (2) deleting duplicated codes; (3) correcting incorrect code combinations. Two simple auxiliary files are used. A simple PC demonstration program is included to enable readers to experiment with this algorithm. The Department of Quarternary Geology of the Geological Survey of The Netherlands possesses a large database of shallow lithologic well logs in plain language and has been using a program based on this algorithm for about 3 yr. Erroneous codes resulting from using this algorithm are less than 2%.

PREFACE: 3rd International Conference of Mechanical Engineering Research (ICMER 2015)

Science.gov (United States)

Mamat, Riazalman; Rahman, Mustafizur; Mohd. Zuki Nik Mohamed, Nik; Che Ghani, Saiful Anwar; Harun, Wan Sharuzi Wan

2015-12-01

The 3rd ICMER2015 is the continuity of the NCMER2010. The year 2010 represents a significant milestone in the history for Faculty of Mechanical Engineering, Universiti Malaysia Pahang (UMP) Malaysia with the organization of the first and second national level conferences (1st and 2nd NCMER) at UMP on May 26-27 and Dec 3-4 2010. The Faculty then changed the name from National Conference on Mechanical Engineering Research (NCMER) to International Conference on Mechanical Engineering Research (ICMER) in 2011 and this year, 2015 is our 3rd ICMER. These proceedings contain the selected scientific manuscripts submitted to the conference. It is with great pleasure to welcome you to the "International Conference on Mechanical Engineering Research (ICMER2015)" that is held at Zenith Hotel, Kuantan, Malaysia. The call for papers attracted submissions of over two hundred abstracts from twelve different countries including Japan, Iran, China, Kuwait, Indonesia, Norway, Philippines, Morocco, Germany, UAE and more. The scientific papers published in these proceedings have been revised and approved by the technical committee of the 3rd ICMER2015. All of the papers exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, combustion, metallurgy, materials science as well as in manufacturing and biomechanics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors clearly state the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. In this edition of ICMER representatives attending are from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and

3rd Computer Science On-line Conference

CERN Document Server

Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

2014-01-01

This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

Classifying Coding DNA with Nucleotide Statistics

Directory of Open Access Journals (Sweden)

Nicolas Carels

2009-10-01

Full Text Available In this report, we compared the success rate of classification of coding sequences (CDS vs. introns by Codon Structure Factor (CSF and by a method that we called Universal Feature Method (UFM. UFM is based on the scoring of purine bias (Rrr and stop codon frequency. We show that the success rate of CDS/intron classification by UFM is higher than by CSF. UFM classifies ORFs as coding or non-coding through a score based on (i the stop codon distribution, (ii the product of purine probabilities in the three positions of nucleotide triplets, (iii the product of Cytosine (C, Guanine (G, and Adenine (A probabilities in the 1st, 2nd, and 3rd positions of triplets, respectively, (iv the probabilities of G in 1st and 2nd position of triplets and (v the distance of their GC3 vs. GC2 levels to the regression line of the universal correlation. More than 80% of CDSs (true positives of Homo sapiens (>250 bp, Drosophila melanogaster (>250 bp and Arabidopsis thaliana (>200 bp are successfully classified with a false positive rate lower or equal to 5%. The method releases coding sequences in their coding strand and coding frame, which allows their automatic translation into protein sequences with 95% confidence. The method is a natural consequence of the compositional bias of nucleotides in coding sequences.

Development of multi-physics code systems based on the reactor dynamics code DYN3D

Energy Technology Data Exchange (ETDEWEB)

Kliem, Soeren; Gommlich, Andre; Grahn, Alexander; Rohde, Ulrich [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany); Schuetze, Jochen [ANSYS Germany GmbH, Darmstadt (Germany); Frank, Thomas [ANSYS Germany GmbH, Otterfing (Germany); Gomez Torres, Armando M.; Sanchez Espinoza, Victor Hugo [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany)

2011-07-15

The reactor dynamics code DYN3D has been coupled with the CFD code ANSYS CFX and the 3D thermal hydraulic core model FLICA4. In the coupling with ANSYS CFX, DYN3D calculates the neutron kinetics and the fuel behavior including the heat transfer to the coolant. The physical data interface between the codes is the volumetric heat release rate into the coolant. In the coupling with FLICA4 only the neutron kinetics module of DYN3D is used. Fluid dynamics and related transport phenomena in the reactor's coolant and fuel behavior is calculated by FLICA4. The correctness of the coupling of DYN3D with both thermal hydraulic codes was verified by the calculation of different test problems. These test problems were set-up in such a way that comparison with the DYN3D stand-alone code was possible. This included steady-state and transient calculations of a mini-core consisting of nine real-size PWR fuel assemblies with ANSYS CFX/DYN3D as well as mini-core and a full core steady-state calculation using FLICA4/DYN3D. (orig.)

Development of multi-physics code systems based on the reactor dynamics code DYN3D

International Nuclear Information System (INIS)

Kliem, Soeren; Gommlich, Andre; Grahn, Alexander; Rohde, Ulrich; Schuetze, Jochen; Frank, Thomas; Gomez Torres, Armando M.; Sanchez Espinoza, Victor Hugo

2011-01-01

The reactor dynamics code DYN3D has been coupled with the CFD code ANSYS CFX and the 3D thermal hydraulic core model FLICA4. In the coupling with ANSYS CFX, DYN3D calculates the neutron kinetics and the fuel behavior including the heat transfer to the coolant. The physical data interface between the codes is the volumetric heat release rate into the coolant. In the coupling with FLICA4 only the neutron kinetics module of DYN3D is used. Fluid dynamics and related transport phenomena in the reactor's coolant and fuel behavior is calculated by FLICA4. The correctness of the coupling of DYN3D with both thermal hydraulic codes was verified by the calculation of different test problems. These test problems were set-up in such a way that comparison with the DYN3D stand-alone code was possible. This included steady-state and transient calculations of a mini-core consisting of nine real-size PWR fuel assemblies with ANSYS CFX/DYN3D as well as mini-core and a full core steady-state calculation using FLICA4/DYN3D. (orig.)

Results from the UK 3rd generation programme: Albion

Science.gov (United States)

McEwen, R. K.; Axcell, C.; Knowles, P.; Hoade, K. P.; Wilson, M.; Dennis, P. N. J.; Backhouse, P.; Gordon, N. T.

2008-10-01

Following the development of 1st Generation systems in the 1970s, thermal imaging has been in service with the UK armed forces for over 25 years and has proven itself to be a battle winning technology. More recently the wider accessibility to similar technologies within opposing forces has reduced the military advantage provided by these 1st Generation systems and a clear requirement has been identified by the UK MOD for thermal imaging sensors providing increased detection, recognition and identification (DRI) ranges together with a simplified logistical deployment burden and reduced through-life costs. In late 2005, the UK MOD initiated a programme known as "Albion" to develop high performance 3rd Generation single waveband infrared detectors to meet this requirement. At the same time, under a separate programme supporting higher risk technology, a dual waveband infrared detector was also developed. The development phase of the Albion programme has now been completed and prototype detectors are now available and have been integrated into demonstration thermal imaging cameras. The Albion programme has now progressed into the second phase, incorporating both single and dual waveband devices, focussing on low rate initial production (LRIP) and qualification of the devices for military applications. All of the detectors have been fabricated using cadmium mercury telluride material (CMT), grown by metal organic vapour phase epitaxy (MOVPE) on low cost, gallium arsenide (GaAs) substrates and bump bonded to the silicon read out circuit (ROIC). This paper discusses the design features of the 3rd Generation detectors developed in the UK together with the results obtained from the prototype devices both in the laboratory and when integrated into field deployable thermal imaging cameras.

A New Video Coding Algorithm Using 3D-Subband Coding and Lattice Vector Quantization

Energy Technology Data Exchange (ETDEWEB)

Choi, J.H. [Taejon Junior College, Taejon (Korea, Republic of); Lee, K.Y. [Sung Kyun Kwan University, Suwon (Korea, Republic of)

1997-12-01

In this paper, we propose an efficient motion adaptive 3-dimensional (3D) video coding algorithm using 3D subband coding (3D-SBC) and lattice vector quantization (LVQ) for low bit rate. Instead of splitting input video sequences into the fixed number of subbands along the temporal axes, we decompose them into temporal subbands of variable size according to motions in frames. Each spatio-temporally splitted 7 subbands are partitioned by quad tree technique and coded with lattice vector quantization(LVQ). The simulation results show 0.1{approx}4.3dB gain over H.261 in peak signal to noise ratio(PSNR) at low bit rate (64Kbps). (author). 13 refs., 13 figs., 4 tabs.

3rd IFToMM Symposium on Mechanism Design for Robotics

CERN Document Server

Ceccarelli, Marco

2015-01-01

This volume contains the Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics, held in Aalborg, Denmark, 2-4 June, 2015. The book contains papers on recent advances in the design of mechanisms and their robotic applications. It treats the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications, among others. The book can be used by researchers and engineers in the relevant areas of mechanisms, machines and robotics.

Fortran code for SU(3) lattice gauge theory with and without MPI checkerboard parallelization

Science.gov (United States)

Berg, Bernd A.; Wu, Hao

2012-10-01

We document plain Fortran and Fortran MPI checkerboard code for Markov chain Monte Carlo simulations of pure SU(3) lattice gauge theory with the Wilson action in D dimensions. The Fortran code uses periodic boundary conditions and is suitable for pedagogical purposes and small scale simulations. For the Fortran MPI code two geometries are covered: the usual torus with periodic boundary conditions and the double-layered torus as defined in the paper. Parallel computing is performed on checkerboards of sublattices, which partition the full lattice in one, two, and so on, up to D directions (depending on the parameters set). For updating, the Cabibbo-Marinari heatbath algorithm is used. We present validations and test runs of the code. Performance is reported for a number of currently used Fortran compilers and, when applicable, MPI versions. For the parallelized code, performance is studied as a function of the number of processors. Program summary Program title: STMC2LSU3MPI Catalogue identifier: AEMJ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEMJ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 26666 No. of bytes in distributed program, including test data, etc.: 233126 Distribution format: tar.gz Programming language: Fortran 77 compatible with the use of Fortran 90/95 compilers, in part with MPI extensions. Computer: Any capable of compiling and executing Fortran 77 or Fortran 90/95, when needed with MPI extensions. Operating system: Red Hat Enterprise Linux Server 6.1 with OpenMPI + pgf77 11.8-0, Centos 5.3 with OpenMPI + gfortran 4.1.2, Cray XT4 with MPICH2 + pgf90 11.2-0. Has the code been vectorised or parallelized?: Yes, parallelized using MPI extensions. Number of processors used: 2 to 11664 RAM: 200 Mega bytes per process. Classification: 11

Teaching Newton's 3rd law of motion using learning by design approach

Science.gov (United States)

Aquino, Jiezel G.; Caliguid, Mariel P.; Buan, Amelia T.; Magsayod, Joy R.; Lahoylahoy, Myrna E.

2018-01-01

This paper presents the process and implementation of Learning by Design Approach in teaching Newton's 3rd Law of Motion. A lesson activity from integrative STEM education was adapted, modified and enhanced through pilot testing. After revisions, the implementation was done to one class. The respondent's prior knowledge was first assessed by a pretest. PPIT (present the scenario, plan, implement and test) was the framework followed in the implementation of Learning by Design. Worksheets were then utilized to measure their conceptual understanding and perception. A score guide was also used to evaluate the student's output. Paired t-test analysis showed that there is a significant difference in the pretest and posttest achievement scores. This implies that the performance of the students have improved during the implementation of the Learning by Design. The Analysis of variance also depicts that the low, average and high benefited in the Learning by Design approach. The results of this study suggests that Learning by Design is an effective approach in teaching Newton's 3rd Law of Motion and thus be used in a Science classroom.

P3T+: A Performance Estimator for Distributed and Parallel Programs

Directory of Open Access Journals (Sweden)

T. Fahringer

2000-01-01

Full Text Available Developing distributed and parallel programs on today's multiprocessor architectures is still a challenging task. Particular distressing is the lack of effective performance tools that support the programmer in evaluating changes in code, problem and machine sizes, and target architectures. In this paper we introduce P3T+ which is a performance estimator for mostly regular HPF (High Performance Fortran programs but partially covers also message passing programs (MPI. P3T+ is unique by modeling programs, compiler code transformations, and parallel and distributed architectures. It computes at compile-time a variety of performance parameters including work distribution, number of transfers, amount of data transferred, transfer times, computation times, and number of cache misses. Several novel technologies are employed to compute these parameters: loop iteration spaces, array access patterns, and data distributions are modeled by employing highly effective symbolic analysis. Communication is estimated by simulating the behavior of a communication library used by the underlying compiler. Computation times are predicted through pre-measured kernels on every target architecture of interest. We carefully model most critical architecture specific factors such as cache lines sizes, number of cache lines available, startup times, message transfer time per byte, etc. P3T+ has been implemented and is closely integrated with the Vienna High Performance Compiler (VFC to support programmers develop parallel and distributed applications. Experimental results for realistic kernel codes taken from real-world applications are presented to demonstrate both accuracy and usefulness of P3T+.

FRAPCON-3: A computer code for the calculation of steady-state, thermal-mechanical behavior of oxide fuel rods for high burnup

International Nuclear Information System (INIS)

Berna, G.A.; Beyer, G.A.; Davis, K.L.; Lanning, D.D.

1997-12-01

FRAPCON-3 is a FORTRAN IV computer code that calculates the steady-state response of light water reactor fuel rods during long-term burnup. The code calculates the temperature, pressure, and deformation of a fuel rod as functions of time-dependent fuel rod power and coolant boundary conditions. The phenomena modeled by the code include (1) heat conduction through the fuel and cladding, (2) cladding elastic and plastic deformation, (3) fuel-cladding mechanical interaction, (4) fission gas release, (5) fuel rod internal gas pressure, (6) heat transfer between fuel and cladding, (7) cladding oxidation, and (8) heat transfer from cladding to coolant. The code contains necessary material properties, water properties, and heat-transfer correlations. The codes' integral predictions of mechanical behavior have not been assessed against a data base, e.g., cladding strain or failure data. Therefore, it is recommended that the code not be used for analyses of cladding stress or strain. FRAPCON-3 is programmed for use on both mainframe computers and UNIX-based workstations such as DEC 5000 or SUN Sparcstation 10. It is also programmed for personal computers with FORTRAN compiler software and at least 8 to 10 megabytes of random access memory (RAM). The FRAPCON-3 code is designed to generate initial conditions for transient fuel rod analysis by the FRAPTRAN computer code (formerly named FRAP-T6)

FY2016 Advanced Batteries R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-08-31

The Advanced Batteries research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush. This report describes the progress made on the research and development projects funded by the Battery subprogram in 2016. This section covers the Vehicle Technologies Office overview; the Battery subprogram R&D overview; Advanced Battery Development project summaries; and Battery Testing, Analysis, and Design project summaries. It also includes the cover and table of contents.

Secure DS-CDMA spreading codes using fully digital multidimensional multiscroll chaos

KAUST Repository

Mansingka, Abhinav S.

2014-06-18

This paper introduces a generalized fully digital hardware implementation of 1-D, 2-D and 3-D multiscroll chaos through sawtooth nonlinearities in a 3rd order ODE with the Euler approximation, wherein low-significance bits pass all NIST SP. 800-22 tests. The low-significance bits show good performance as spreading code for multiple-access DS-CDMA in AWGN and multipath environments, equivalent to Gold codes. This system capitalizes on complex nonlinear dynamics afforded by multiscroll chaos to provide higher security than conventional codes with the same BER performance demonstrated experimentally on a Xilinx Virtex 4 FPGA with logic utilization less than 1.25% and throughput up to 10.92 Gbits/s.

Participants to the 3rd HEP Information Resources Summit, 6-7 May 2009

CERN Multimedia

Fermilab, Photo Service

2009-01-01

The broad theme of the 3rd HEP Information Resources Summit was "Collaboration between Information Services." As HEP increasingly borders fields such as instrumentation and astrophysics, it was discussed what potential interrelationships and communication this group have to serve this broader research community seamlessly.

FY2015 Energy Storage R&D Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-04-30

The Energy Storage research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush.

Foundational Skills to Support Reading for Understanding in Kindergarten through 3rd Grade. Educator's Practice Guide. NCEE 2016-4008

Science.gov (United States)

Foorman, Barbara; Beyler, Nicholas; Borradaile, Kelley; Coyne, Michael; Denton, Carolyn A.; Dimino, Joseph; Furgeson, Joshua; Hayes, Lynda; Henke, Juliette; Justice, Laura; Keating, Betsy; Lewis, Warnick; Sattar, Samina; Streke, Andrei; Wagner, Richard; Wissel, Sarah

2016-01-01

The goal of this practice guide is to offer educators specific, evidence-based recommendations for teaching foundational reading skills to students in kindergarten through 3rd grade. This guide is a companion to the existing practice guide, "Improving Reading Comprehension in Kindergarten Through 3rd Grade", and as a set, these guides…

BOT3P5.2, 3D Mesh Generator and Graphical Display of Geometry for Radiation Transport Codes, Display of Results

International Nuclear Information System (INIS)

Orsi, Roberto; Bidaud, Adrien

2007-01-01

1 - Description of program or function: BOT3P was originally conceived as a set of standard FORTRAN 77 language programs in order to give the users of the DORT and TORT deterministic transport codes some useful diagnostic tools to prepare and check their input data files. Later versions extended the possibility to produce the geometrical, material distribution and fixed neutron source data to other deterministic transport codes such as TWODANT/THREEDANT of the DANTSYS system, PARTISN and, potentially, to any transport code through BOT3P binary output files that can be easily interfaced (see, for example, the Russian two-dimensional (2D) and three-dimensional (3D) discrete ordinates neutron, photon and charged particle transport codes KASKAD-S-2.5 and KATRIN-2.0). As from Version 5.1 BOT3P contained important additions specifically addressed to radiation transport analysis for medical applications. BOT3P-5.2 contains new graphics capabilities. Some of them enable users to select space sub-domains of the total mesh grid in order to improve the zoom simulation of the geometry, both in 2D cuts and in 3D. Moreover the new BOT3P module (PDTM) may improve the interface of BOT3P geometrical models to transport analysis codes. The following programs are included in the BOT3P software package: GGDM, DDM, GGTM, DTM2, DTM3, RVARSCL, COMPARE, MKSRC, CATSM, DTET, and PDTM. The main features of these different programs are described. 2 - Methods: GGDM and GGTM work similarly from the logical point of view. Since the 3D case is more general, the following description refers to GGTM. All the co-ordinate values that characterise the geometrical scheme at the basis of the 3D transport code geometrical and material model are read, sorted and all stored if different from the neighbouring ones more than an input tolerance established by the user. These co-ordinates are always present in the fine-mesh boundary arrays independently of the mesh grid refinement options, because they

RDandD Programme 2010. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste; Fud-program 2010. Program foer forskning, utveckling och demonstration av metoder foer hantering och slutfoervaring av kaernavfall

Energy Technology Data Exchange (ETDEWEB)

2010-09-15

The RD and D programme 2010 gives an account of SKB's plans for research, development and demonstration during the period 2011-2016. SKB's activities are divided into two main areas - the programme for Low and Intermediate Level Waste (the Loma program) and the Nuclear Fuel Program. The RD and D Programme 2010 consists of five parts: Part I: Overall Plan, Part II: Loma program, Part III: Nuclear Fuel Program, Part IV: Research on analysis of long-term safety, Part V: Social Science Research. The 2007 RD and D programme was focused primarily on technology development to realize the final repository for spent nuclear fuel. The actions described were aimed at increasing awareness of long-term safety and to obtain technical data for application under the Nuclear Activities Act for the final repository for spent fuel and under the Environmental Code of the repository system. Many important results from these efforts are reported in this program. An overall account of the results will be given in the Licensing application in early 2011. The authorities' review of RD and D programme in 2007 and completion of the program called for clarification of plans and programs for the final repository for short-lived radioactive waste, SFR, and the final repository for waste, SFL. This RD and D program describes these plans in a more detailed way

3rd International Conference on Movement, Health and Exercise 2016

CERN Document Server

Cheong, Jadeera; Usman, Juliana; Ahmad, Mohd; Razman, Rizal; Selvanayagam, Victor

2017-01-01

This volume presents the proceedings of the 3rd International Conference on Movement, Health and Exercise 2016 (MoHE2016). The conference was jointly organized by the Biomedical Engineering Department and Sports Centre, University of Malaya. It was held in Malacca, from 28-30 September 2016. MoHE 2016 provided a good opportunity for speakers and participants to actively discuss about recent developments in a wide range of topics in the area of sports and exercise science. In total, 83 presenters and 140 participants took part in this successful conference. .

Codes and Standards Technical Team Roadmap

Energy Technology Data Exchange (ETDEWEB)

None

2013-06-01

The Hydrogen Codes and Standards Tech Team (CSTT) mission is to enable and facilitate the appropriate research, development, & demonstration (RD&D) for the development of safe, performance-based defensible technical codes and standards that support the technology readiness and are appropriate for widespread consumer use of fuel cells and hydrogen-based technologies with commercialization by 2020. Therefore, it is important that the necessary codes and standards be in place no later than 2015.

WEC3: Wave Energy Converter Code Comparison Project: Preprint

Energy Technology Data Exchange (ETDEWEB)

Combourieu, Adrien; Lawson, Michael; Babarit, Aurelien; Ruehl, Kelley; Roy, Andre; Costello, Ronan; Laporte Weywada, Pauline; Bailey, Helen

2017-01-01

This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

Report on Workshop on Future Directions for Accelerator R&D at Fermilab

Energy Technology Data Exchange (ETDEWEB)

Shiltsev, V.; Church, M.; Spentzouris, P.; Chou, W.; /Fermilab

2009-09-01

Accelerator R&D has played a crucial role in enabling scientific discovery in the past century and will continue to play this role in the years to come. In the U.S., the Office of High Energy Physics of DOE's Office of Science is developing a plan for national accelerator R&D stewardship. Fermilab undertakes accelerator research, design, and development focused on superconducting radio-frequency (RF), superconducting magnet, beam cooling, and high intensity proton technologies. In addition, the Lab pursues comprehensive integrated theoretical concepts and simulations of complete future facilities on both the energy and intensity frontiers. At present, Fermilab (1) supplies integrated design concept and technology development for a multi-MW proton source (Project X) to support world-leading programs in long baseline neutrino and rare processes experiments; (2) plays a leading role in the development of ionization cooling technologies required for muon storage ring facilities at the energy (multi-TeV Muon Collider) and intensity (Neutrino Factory) frontiers, and supplies integrated design concepts for these facilities; and (3) carries out a program of advanced accelerator R&D (AARD) in the field of high quality beam sources, and novel beam manipulation techniques.

ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

Science.gov (United States)

2016-04-01

Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

Probabilistic programming in Python using PyMC3

Directory of Open Access Journals (Sweden)

John Salvatier

2016-04-01

Full Text Available Probabilistic programming allows for automatic Bayesian inference on user-defined probabilistic models. Recent advances in Markov chain Monte Carlo (MCMC sampling allow inference on increasingly complex models. This class of MCMC, known as Hamiltonian Monte Carlo, requires gradient information which is often not readily available. PyMC3 is a new open source probabilistic programming framework written in Python that uses Theano to compute gradients via automatic differentiation as well as compile probabilistic programs on-the-fly to C for increased speed. Contrary to other probabilistic programming languages, PyMC3 allows model specification directly in Python code. The lack of a domain specific language allows for great flexibility and direct interaction with the model. This paper is a tutorial-style introduction to this software package.

2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2015-10-01

This report summarizes comments from the Peer Review Panel at the 2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 8-12, 2015, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2011-09-01

This report summarizes comments from the Peer Review Panel at the 2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 9-13, 2011, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

2013 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2013-10-01

This report summarizes comments from the Peer Review Panel at the 2013 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 13-17, 2013, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2014-10-01

This report summarizes comments from the Peer Review Panel at the 2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 16-20, 2014, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

none,

2012-09-01

This report summarizes comments from the Peer Review Panel at the 2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 14-18, 2012, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

Process Model Improvement for Source Code Plagiarism Detection in Student Programming Assignments

Science.gov (United States)

Kermek, Dragutin; Novak, Matija

2016-01-01

In programming courses there are various ways in which students attempt to cheat. The most commonly used method is copying source code from other students and making minimal changes in it, like renaming variable names. Several tools like Sherlock, JPlag and Moss have been devised to detect source code plagiarism. However, for larger student…

Utility residential new construction programs: Going beyond the code. A report from the Database on Energy Efficiency Programs (DEEP) Project

Energy Technology Data Exchange (ETDEWEB)

Vine, E.

1995-08-01

Based on an evaluation of 10 residential new construction programs, primarily sponsored by investor-owned utilities in the United States, we find that many of these programs are in dire straits and are in danger of being discontinued because current inclusion of only direct program effects leads to the conclusion that they are not cost-effective. We believe that the cost-effectiveness of residential new construction programs can be improved by: (1) promoting technologies and advanced building design practices that significantly exceed state and federal standards; (2) reducing program marketing costs and developing more effective marketing strategies; (3) recognizing the role of these programs in increasing compliance with existing state building codes; and (4) allowing utilities to obtain an ``energy-savings credit`` from utility regulators for program spillover (market transformation) impacts. Utilities can also leverage their resources in seizing these opportunities by forming strong and trusting partnerships with the building community and with local and state government.

The sphere-PAC fuel code 'SPHERE-3'

International Nuclear Information System (INIS)

Wallin, H.

2000-01-01

Sphere-PAC fuel is an advanced nuclear fuel, in which the cladding tube is filled with small fuel spheres instead of the more usual fuel pellets. At PSI, the irradiation behaviour of sphere-PAC fuel is calculated using the computer code SPHERE-3. The paper describes the present status of the SPHERE-3 code, and some results of the qualification process against experimental data. (author)

The sphere-pac fuel code 'SPHERE-3'

International Nuclear Information System (INIS)

Wallin, H.; Nordstroem, L.A.; Hellwig, C.

2001-01-01

Sphere-pac fuel is an advanced nuclear fuel, in which the cladding tube is filled with small fuel spheres instead of the more usual fuel pellets. At PSI, the irradiation behaviour of sphere-pac fuel is calculated using the computer code SPHERE-3. The paper describes the present status of the SPHERE-3 code, and some results of the qualification process against experimental data. (author)

Validation of OPERA3D PCMI Analysis Code

Energy Technology Data Exchange (ETDEWEB)

Jeun, Ji Hoon; Choi, Jae Myung; Yoo, Jong Sung [KEPCO Nuclear Fuel Co., Daejeon (Korea, Republic of); Cheng, G.; Sim, K. S.; Chassie, Girma [Candu Energy INC.,Ontario (Canada)

2013-10-15

This report will describe introduction of validation of OPERA3D code, and validation results that are directly related with PCMI phenomena. OPERA3D was developed for the PCMI analysis and validated using the in-pile measurement data. Fuel centerline temperature and clad strain calculation results shows close expectations with measurement data. Moreover, 3D FEM fuel model of OPERA3D shows slight hour glassing behavior of fuel pellet in contact case. Further optimization will be conducted for future application of OPERA3D code. Nuclear power plant consists of many complicated systems, and one of the important objects of all the systems is maintaining nuclear fuel integrity. However, it is inevitable to experience PCMI (Pellet Cladding Mechanical Interaction) phenomena at current operating reactors and next generation reactors for advanced safety and economics as well. To evaluate PCMI behavior, many studies are on-going to develop 3-dimensional fuel performance evaluation codes. Moreover, these codes are essential to set the safety limits for the best estimated PCMI phenomena aimed for high burnup fuel.

BACODINE/3rd Interplanetary Network burst localization

International Nuclear Information System (INIS)

Hurley, K.; Barthelmy, S.; Butterworth, P.; Cline, T.; Sommer, M.; Boer, M.; Niel, M.; Kouveliotou, C.; Fishman, G.; Meegan, C.

1996-01-01

Even with only two widely separated spacecraft (Ulysses and GRO), 3rd Interplanetary Network (IPN) localizations can reduce the areas of BATSE error circles by two orders of magnitude. Therefore it is useful to disseminate them as quickly as possible following BATSE bursts. We have implemented a system which transmits the light curves of BACODINE/BATSE bursts directly by e-mail to UC Berkeley immediately after detection. An automatic e-mail parser at Berkeley watches for these notices, determines the Ulysses crossing time window, and initiates a search for the burst data on the JPL computer as they are received. In ideal cases, it is possible to retrieve the Ulysses data within a few hours of a burst, generate an annulus of arrival directions, and e-mail it out to the astronomical community by local nightfall. Human operators remain in this loop, but we are developing a fully automated routine which should remove them, at least for intense events, and reduce turn-around times to an absolute minimum. We explain the current operations, the data types used, and the speed/accuracy tradeoffs

Protograph LDPC Codes with Node Degrees at Least 3

Science.gov (United States)

Divsalar, Dariush; Jones, Christopher

2006-01-01

In this paper we present protograph codes with a small number of degree-3 nodes and one high degree node. The iterative decoding threshold for proposed rate 1/2 codes are lower, by about 0.2 dB, than the best known irregular LDPC codes with degree at least 3. The main motivation is to gain linear minimum distance to achieve low error floor. Also to construct rate-compatible protograph-based LDPC codes for fixed block length that simultaneously achieves low iterative decoding threshold and linear minimum distance. We start with a rate 1/2 protograph LDPC code with degree-3 nodes and one high degree node. Higher rate codes are obtained by connecting check nodes with degree-2 non-transmitted nodes. This is equivalent to constraint combining in the protograph. The condition where all constraints are combined corresponds to the highest rate code. This constraint must be connected to nodes of degree at least three for the graph to have linear minimum distance. Thus having node degree at least 3 for rate 1/2 guarantees linear minimum distance property to be preserved for higher rates. Through examples we show that the iterative decoding threshold as low as 0.544 dB can be achieved for small protographs with node degrees at least three. A family of low- to high-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

Oil and Gas R&D Programs

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This publication describes the major components of the research and development programs of the Department of Energy`s Office of Natural Gas and Petroleum Technology. These programs are commonly referred to collectively as the `Oil and Gas Program.` This document provides customers with a single source of information describing the details of the individual technology program components. This document reflects the results of a planning cycle that began in early 1996 with the development of a scenario analysis for the programs, followed by the development of the coordinated strategic plan. The technology program plans, which are the most recent products of the planning cycle, expand on the program descriptions presented in the coordinated strategic plan, and represent an initial effort to coordinate the Oil and Gas Program exploration and production programs and budgets. Each technology program plan includes a `roadmap` that summarizes the progress of the program to the present and indicates its future direction. The roadmaps describe the program drivers, vision, mission, strategies, and measures of success. Both the individual technology program plans and the strategic plan are dynamic and are intended to be updated regularly.

Photonic Network R&D Activities in Japan-Current Activities and Future Perspectives

Science.gov (United States)

Kitayama, Ken-Ichi; Miki, Tetsuya; Morioka, Toshio; Tsushima, Hideaki; Koga, Masafumi; Mori, Kazuyuki; Araki, Soichiro; Sato, Ken-Ichi; Onaka, Hiroshi; Namiki, Shu; Aoyama, Tomonori

2005-10-01

R&D activities on photonic networks in Japan are presented. First, milestones in current ongoing R&D programs supported by Japanese government agencies are introduced, including long-distance and wavelength division multiplexing (WDM) fiber transmission, wavelength routing, optical burst switching (OBS), and control-plane technology for IP backbone networks. Their goal was set to evolve a legacy telecommunications network to IP-over-WDM networks by introducing technologies for WDM and wavelength routing. We then discuss the perspectives of so-called PHASE II R&D programs for photonic networks over the next 5 years until 2010, by focusing on the report that has been recently issued by the Photonic Internet Forum (PIF), a consortium that has major carriers, telecom vendors, and Japanese academics as members. The PHASE II R&D programs should serve to establish a photonic platform to provide abundant bandwidth on demand, at any time on a real-time basis, through the customer's initiative to promote bandwidth-rich applications, such as grid computing, real-time digital-cinema streaming, medical and educational applications, and network storage in e-commerce.

Extreme and Local 3rd Harmonic Response of Niobium (Nb) Superconductor

Science.gov (United States)

Oripov, Bakhrom; Tai, Tamin; Anlage, Steven

Superconducting Radio Frequency (SRF) cavities are being widely used in new generation particle accelerators. These SRF cavities are based on bulk Nb. Based on the needs of the SRF community to identify defects on Nb surfaces, a novel near-field magnetic microwave microscope was successfully built using a magnetic writer from a conventional magnetic recording hard-disk drive1. This magnetic writer can create an RF magnetic field, localized and strong enough to drive Nb into the vortex state. This probe enables us to locate defects through scanning and mapping of the local electrodynamic response in the multi-GHz frequency range. Recent measurements have shown that 3rd harmonic nonlinear response is far more sensitive to variations in input power and temperature then linear response, thus we mainly study the 3rd harmonic response. Moreover, the superconductor is usually the only source for nonlinear response in our setup, thus there is less chance of having noise or background signal. Understanding the mechanism responsible for this non-linear response is important for improving the performance of SRF cavities. Besides Nb we also study various other superconductors such as MgB2 and the cuprate Bi-Sr-Ca-Cu-O (BSCCO) for potential applications in SRF cavities. This work is funded by US Department of Energy through Grant # DE-SC0012036T and CNAM.

A Methodology for Collective Evaluation and Selection of Industrial R&D Projects

OpenAIRE

Muhittin Oral; Ossama Kettani; Pascal Lang

1991-01-01

This paper proposes a methodology for evaluating and selecting R&D projects in a collective decision setting, especially useful at sectorial and national levels. It consists of two major phases: Evaluation and Selection. The evaluation process repeatedly uses mathematical programming models to determine the "relative values" of a given R&D project from the viewpoint of the other R&D projects. The selection process of R&D projects is based on these "relative values" and is done through a model...

Performance measures for transform data coding.

Science.gov (United States)

Pearl, J.; Andrews, H. C.; Pratt, W. K.

1972-01-01

This paper develops performance criteria for evaluating transform data coding schemes under computational constraints. Computational constraints that conform with the proposed basis-restricted model give rise to suboptimal coding efficiency characterized by a rate-distortion relation R(D) similar in form to the theoretical rate-distortion function. Numerical examples of this performance measure are presented for Fourier, Walsh, Haar, and Karhunen-Loeve transforms.

R&D cooperation versus R&D subcontracting: empirical evidence from French survey data.

OpenAIRE

Estelle Dhont-Peltrault; Etienne Pfister

2007-01-01

This paper uses a survey of French firms active in R&D to identify the determinants of R&D outsourcing and of the ensuing trade-off between R&D subcontracting and R&D cooperation. Internal R&D expenditures increase both the probability of outsourcing and the number of R&D partners. Investment in fundamental R&D, group belonging, and the sector’s high R&D intensity positively influences the probability of R&D outsourcing but have less impact on the number of partners. R&D subcontracting is mor...

3rd International Conference on Intelligent Technologies and Engineering Systems

CERN Document Server

2016-01-01

This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

R&D for Collider Beauty Physics at the LHC

CERN Multimedia

2002-01-01

We propose an R&D program for the development of a Beauty trigger and innovative elements of the associated spectrometer. The program builds on the success of the recent S$\\bar{p}$pS collider run of the P238 Collaboration, in which clean signals from beam-beam interactions were observed in a large silicon strip microvertex detector running 1.5~mm from the circulating beams. A continuing successful R&D program of the type proposed could ultimately lead to a collider experiment at the LHC to study CP-violation and rare B decays. \\\\ \\\\ We request a fixed target run during late 1992 in order to demonstrate the effectiveness of a heavy flavour trigger which uses real time digital calculations on silicon strip data, implemented with a data driven processor.

“Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension"

DEFF Research Database (Denmark)

Minssen, Timo; Mimler, Marc

2017-01-01

of bioprinting- inventions are being patented or would be- protectable under European and US patent laws. Rather than focusing on the highly relevant questions that 3D printing poses for patent infringement doctrines and research exemptions , this paper concentrates on the question of patentable subject matter......, “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension", Working Paper, forthcoming in: RM Ballardini, M Norrgård & J Partanen (red), 3D printing, Intellectual Property and Innovation – Insights from Law and Technology. Wolters Klu. Available at https...

EGS code system: computer programs for the Monte Carlo simulation of electromagnetic cascade showers. Version 3. [EGS, PEGS, TESTSR, in MORTRAN

Energy Technology Data Exchange (ETDEWEB)

Ford, R.L.; Nelson, W.R.

1978-06-01

A code to simulate almost any electron--photon transport problem conceivable is described. The report begins with a lengthy historical introduction and a description of the shower generation process. Then the detailed physics of the shower processes and the methods used to simulate them are presented. Ideas of sampling theory, transport techniques, particle interactions in general, and programing details are discussed. Next, EGS calculations and various experiments and other Monte Carlo results are compared. The remainder of the report consists of user manuals for EGS, PEGS, and TESTSR codes; options, input specifications, and typical output are included. 38 figures, 12 tables. (RWR)

Transition of R&D into Operations at Fleet Numerical Meteorology and Oceanography Center

Science.gov (United States)

Clancy, R. M.

2006-12-01

R&D activity, the Marine Meteorology Division of the Naval Research Laboratory (NRL Code 7500). NRL Code 7500 is a world-class research organization, with focus on weather-related support for the warfighter. Fleet Numerical and NRL Code 7500 share space, data, software and computer systems, and together represent one of the largest concentrations of weather-related intellectual capital in the nation. As documented, for example, by the Board on Atmospheric Sciences and Climate (BASC) of the National Research Council, investment in R&D is crucial for maintaining state-of-the-art operational Numerical Weather Prediction (NWP) capabilities (see BASC, 1998). And collocation and close cooperation between research and operations, such as exists between NRL Code 7500 and Fleet Numerical, is the optimum arrangement for transitioning R&D quickly and cost-effectively into new and improved operational weather prediction capabilities.

Starting Young: Massachusetts Birth-3rd Grade Policies That Support Children's Literacy Development

Science.gov (United States)

Cook, Shayna; Bornfreund, Laura

2015-01-01

Massachusetts is one of a handful of states that is often recognized as a leader in public education, and for good reason. The Commonwealth consistently outperforms most states on national reading and math tests and often leads the pack in education innovations. "Starting Young: Massachusetts Birth-3rd Grade Policies that Support Children's…

Coding of Depth Images for 3DTV

DEFF Research Database (Denmark)

Zamarin, Marco; Forchhammer, Søren

In this short paper a brief overview of the topic of coding and compression of depth images for multi-view image and video coding is provided. Depth images represent a convenient way to describe distances in the 3D scene, useful for 3D video processing purposes. Standard approaches...... for the compression of depth images are described and compared against some recent specialized algorithms able to achieve higher compression performances. Future research directions close the paper....

3rd Workshop on Branching Processes and their Applications

CERN Document Server

González, Miguel; Gutiérrez, Cristina; Martínez, Rodrigo; Minuesa, Carmen; Molina, Manuel; Mota, Manuel; Ramos, Alfonso; WBPA15

2016-01-01

This volume gathers papers originally presented at the 3rd Workshop on Branching Processes and their Applications (WBPA15), which was held from 7 to 10 April 2015 in Badajoz, Spain (http://branching.unex.es/wbpa15/index.htm). The papers address a broad range of theoretical and practical aspects of branching process theory. Further, they amply demonstrate that the theoretical research in this area remains vital and topical, as well as the relevance of branching concepts in the development of theoretical approaches to solving new problems in applied fields such as Epidemiology, Biology, Genetics, and, of course, Population Dynamics. The topics covered can broadly be classified into the following areas: 1. Coalescent Branching Processes 2. Branching Random Walks 3. Population Growth Models in Varying and Random Environments 4. Size/Density/Resource-Dependent Branching Models 5. Age-Dependent Branching Models 6. Special Branching Models 7. Applications in Epidemiology 8. Applications in Biology and Genetics Offer...

Small Business Innovation Research : Program Solicitation (Closing Date : May 3, 1994)

Science.gov (United States)

1994-01-01

The Small Business Innovation Research (SBIR) Program is the primary vehicle through which the federal government funds research and development (R&D) projects at small technology companies. The SBIR Program of the Department of Transportation is a r...

Joint Machine Learning and Game Theory for Rate Control in High Efficiency Video Coding.

Science.gov (United States)

Gao, Wei; Kwong, Sam; Jia, Yuheng

2017-08-25

In this paper, a joint machine learning and game theory modeling (MLGT) framework is proposed for inter frame coding tree unit (CTU) level bit allocation and rate control (RC) optimization in High Efficiency Video Coding (HEVC). First, a support vector machine (SVM) based multi-classification scheme is proposed to improve the prediction accuracy of CTU-level Rate-Distortion (R-D) model. The legacy "chicken-and-egg" dilemma in video coding is proposed to be overcome by the learning-based R-D model. Second, a mixed R-D model based cooperative bargaining game theory is proposed for bit allocation optimization, where the convexity of the mixed R-D model based utility function is proved, and Nash bargaining solution (NBS) is achieved by the proposed iterative solution search method. The minimum utility is adjusted by the reference coding distortion and frame-level Quantization parameter (QP) change. Lastly, intra frame QP and inter frame adaptive bit ratios are adjusted to make inter frames have more bit resources to maintain smooth quality and bit consumption in the bargaining game optimization. Experimental results demonstrate that the proposed MLGT based RC method can achieve much better R-D performances, quality smoothness, bit rate accuracy, buffer control results and subjective visual quality than the other state-of-the-art one-pass RC methods, and the achieved R-D performances are very close to the performance limits from the FixedQP method.

Direct G-code manipulation for 3D material weaving

Science.gov (United States)

Koda, S.; Tanaka, H.

2017-04-01

The process of conventional 3D printing begins by first build a 3D model, then convert to the model to G-code via a slicer software, feed the G-code to the printer, and finally start the printing. The most simple and popular 3D printing technique is Fused Deposition Modeling. However, in this method, the printing path that the printer head can take is restricted by the G-code. Therefore the printed 3D models with complex pattern have structural errors like holes or gaps between the printed material lines. In addition, the structural density and the material's position of the printed model are difficult to control. We realized the G-code editing, Fabrix, for making a more precise and functional printed model with both single and multiple material. The models with different stiffness are fabricated by the controlling the printing density of the filament materials with our method. In addition, the multi-material 3D printing has a possibility to expand the physical properties by the material combination and its G-code editing. These results show the new printing method to provide more creative and functional 3D printing techniques.

Do 2nd and 3rd Grade Teachers' Linguistic Knowledge and Instructional Practices Predict Spelling Gains in Weaker Spellers?

Science.gov (United States)

Puliatte, Alison; Ehri, Linnea C.

2018-01-01

The relationship between 2nd and 3rd grade teachers' linguistic knowledge and spelling instructional practices and their students' spelling gains from fall to spring was examined. Second grade (N = 16) and 3rd grade (N = 16) teachers were administered an instructional practices survey and a linguistic knowledge test. Total scores on the two…

Programming a real code in a functional language (part 1)

Energy Technology Data Exchange (ETDEWEB)

Hendrickson, C.P.

1991-09-10

For some, functional languages hold the promise of allowing ease of programming massively parallel computers that imperative languages such as Fortran and C do not offer. At LLNL, we have initiated a project to write the physics of a major production code in Sisal, a functional language developed at LLNL in collaboration with researchers throughout the world. We are investigating the expressibility of Sisal, as well as its performance on a shared-memory multiprocessor, the Y-MP. An interesting aspect of the project is that Sisal modules can call Fortran modules, and are callable by them. This eliminates the rewriting of 80% of the production code that would not benefit from parallel execution. Preliminary results indicate that the restrictive nature of the language does not cause problems in expressing the algorithms we have chosen. Some interesting aspects of programming in a mixed functional-imperative environment have surfaced, but can be managed. 8 refs.

R&D for a single-layer Nb$_{3}$Sn common coil dipole using the react-and-wind fabrication technique

CERN Document Server

Ambrosio, G; Barzi, E; Bauer, P; Chichili, D R; Ewald, K D; Fehér, S; Imbasciati, L; Kashikhin, V V; Limon, P J; Litvinenko, L; Novitski, I; Rey, J M; Scanlan, R M; Yadav, S; Yamada, R; Zlobin, A V

2002-01-01

A dipole magnet based on the common coil design, using prereacted Nb /sub 3/Sn superconductor, is under development at Fermilab, for a future Very Large Hadron Collider. This magnet has some innovative design and technological features such as single layer coils, a 22 mm wide 60-strand Rutherford type cable and stainless steel collars reinforced by horizontal bridges inserted between coil blocks. Both left and right coils are wound simultaneously into the collar structure and then impregnated with epoxy. In order to optimize the design and fabrication techniques an R&D program is underway. The production of cables with the required characteristics was shown possible. Collar laminations were produced, assembled and tested in order to check the effectiveness of the bridges and the validity of the mechanical design. A mechanical model consisting in a 165 mm long section of the magnet straight section was assembled and tested. This paper summarizes the status of the program, and reports the results of fabrica...

Editorial: 3rd Special Issue on behavior change, health, and health disparities.

Science.gov (United States)

Higgins, Stephen T

2016-11-01

This Special Issue of Preventive Medicine (PM) is the 3rd that we have organized on behavior change, health, and health disparities. This is a topic of critical importance to improving U.S. population health. There is broad scientific consensus that personal behaviors such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. Hence, effectively promoting health-related behavior change needs to be a key component of health care research and policy. There is also broad recognition that while these problems extend throughout the population, they disproportionately impact economically disadvantaged populations and other vulnerable populations and represent a major contributor to health disparities. Thus, behavior change represents an essential step in curtailing health disparities, which receives special attention in this 3rd Special Issue. We also devote considerable space to the longstanding challenges of reducing cigarette smoking and use of other tobacco and nicotine delivery products in vulnerable populations, obesity, and for the first time food insecurity. Across each of these topics we include contributions from highly accomplished policymakers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges. Copyright © 2016 Elsevier Inc. All rights reserved.

3rd Workshop on "Combinations of Intelligent Methods and Applications"

CERN Document Server

Palade, Vasile

2013-01-01

The combination of different intelligent methods is a very active research area in Artificial Intelligence (AI). The aim is to create integrated or hybrid methods that benefit from each of their components.  The 3rd Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2012) was intended to become a forum for exchanging experience and ideas among researchers and practitioners who are dealing with combining intelligent methods either based on first principles or in the context of specific applications. CIMA 2012 was held in conjunction with the 22nd European Conference on Artificial Intelligence (ECAI 2012).This volume includes revised versions of the papers presented at CIMA 2012.  .

estec2007 - 3rd European solar thermal energy conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-12-14

The sessions of the 'estec2007 - 3{sup rd} European Solar Thermal Energy Conference held in Freiburg, Germany have the following titles: The solar thermal sector at a turning point; Cooling and Process Heat, Country reports Europe; Standards and Certification; Country reports outside Europe; Awareness raising and marketing; Domestic hot water and space heating; Domestic hot water and space heating; Quality Assurance and Solar Thermal Energy Service Companies; Collectors and other key technical issues; Policy - Financial incentives; Country Reports; Marketing and Awareness Raising; Quality Assurance Measures/Monistoring; Standards and Certification; Collectors; Domestic Hot Water and Space Heating; Industrial Process Heat; Storage; Solar Cooling. (AKF)

estec2007 - 3rd European solar thermal energy conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-12-14

The sessions of the 'estec2007 - 3{sup rd} European Solar Thermal Energy Conference held in Freiburg, Germany have the following titles: The solar thermal sector at a turning point; Cooling and Process Heat, Country reports Europe; Standards and Certification; Country reports outside Europe; Awareness raising and marketing; Domestic hot water and space heating; Domestic hot water and space heating; Quality Assurance and Solar Thermal Energy Service Companies; Collectors and other key technical issues; Policy - Financial incentives; Country Reports; Marketing and Awareness Raising; Quality Assurance Measures/Monistoring; Standards and Certification; Collectors; Domestic Hot Water and Space Heating; Industrial Process Heat; Storage; Solar Cooling. (AKF)

The FELIX program of experiments and code development

International Nuclear Information System (INIS)

Turner, L.R.

1983-01-01

An experimental program and test bed called FELIX (Fusion Electromagnetic Induction Experiment) which is under construction at Argonne National Laboratory is described. The facility includes the following facilities; (a) a sizable constant field, analogous to a tokamak toroidal field or the confining field of a mirror reactor, (b) a pulsed field with a sizable rate of change, analogous to a pulsed poloidal field or to the changing field of a plasma disruption, perpendicular to the constant field, and (c) a sufficiently large volume to assure that large, complex test pieces can be tested, and that the forces, torques, currents, and field distortions which are developed are large enough to be measured accurately. The development of the necessary computer codes and the experimental program are examined. (U.K.)

3rd International Workshop on Turbulent Spray Combustion

CERN Document Server

Gutheil, Eva

2014-01-01

This book reflects the results of the 2nd and 3rd International Workshops on Turbulent Spray Combustion. The focus is on progress in experiments and numerical simulations for two-phase flows, with emphasis on spray combustion. Knowledge of the dominant phenomena and their interactions allows development of predictive models and their use in combustor and gas turbine design. Experts and young researchers present the state-of-the-art results, report on the latest developments and exchange ideas in the areas of experiments, modelling and simulation of reactive multiphase flows. The first chapter reflects on flame structure, auto-ignition and atomization with reference to well-characterized burners, to be implemented by modellers with relative ease. The second chapter presents an overview of first simulation results on target test cases, developed at the occasion of the 1st International Workshop on Turbulent Spray Combustion. In the third chapter, evaporation rate modelling aspects are covered, while the fourth ...

PORPST: A statistical postprocessor for the PORMC computer code

International Nuclear Information System (INIS)

Eslinger, P.W.; Didier, B.T.

1991-06-01

This report describes the theory underlying the PORPST code and gives details for using the code. The PORPST code is designed to do statistical postprocessing on files written by the PORMC computer code. The data written by PORMC are summarized in terms of means, variances, standard deviations, or statistical distributions. In addition, the PORPST code provides for plotting of the results, either internal to the code or through use of the CONTOUR3 postprocessor. Section 2.0 discusses the mathematical basis of the code, and Section 3.0 discusses the code structure. Section 4.0 describes the free-format point command language. Section 5.0 describes in detail the commands to run the program. Section 6.0 provides an example program run, and Section 7.0 provides the references. 11 refs., 1 fig., 17 tabs

Recent developments at 3rd generation storage ring light sources (3/4)

CERN Multimedia

CERN. Geneva

2009-01-01

Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

SCRAM reactivity calculations with the KIKO3D code

International Nuclear Information System (INIS)

Hordosy, G.; Kerszturi, A.; Maraczy, Cs.; Temesvari, E.

1999-01-01

Discrepancies between calculated static reactivities and measured reactivities evaluated with reactivity meters led to investigating SCRAM with the KIKO3D dynamic code, The time and space dependent neutron flux in the reactor core during the rod drop measurement was calculated by the KIKO3D nodal diffusion code. For calculating the ionisation chamber signals the Green function technique was applied. The Green functions of ionisation chambers were evaluated via solving the neutron transport equation in the reflector regions with the MCNP Monte Carlo code. The detector signals during asymmetric SCRAM measurements were calculated and compared with measured data using the inverse point kinetics transformation. The sufficient agreement validates the KIKO3D code to determine the reactivities after SCRAM. (Authors)

3rd Symposium on Space Optical Instruments and Applications

CERN Document Server

Zhang, Guangjun

2017-01-01

This volume contains selected and expanded contributions presented at the 3rd Symposium on Space Optical Instruments and Applications in Beijing, China June 28 – 29, 2016. This conference series is organised by the Sino-Holland Space Optical Instruments Laboratory, a cooperation platform between China and the Netherlands. The symposium focused on key technological problems of optical instruments and their applications in a space context. It covered the latest developments, experiments and results regarding theory, instrumentation and applications in space optics. The book is split across five topical sections. The first section covers space optical remote sensing system design, the second advanced optical system design, the third remote sensor calibration and measurement. Remote sensing data processing and information extraction is then presented, followed by a final section on remote sensing data applications. .

3rd International Conference on Nanotechnologies and Biomedical Engineering

CERN Document Server

Tiginyanu, Ion

2016-01-01

This volume presents the proceedings of the 3rd International Conference on Nanotechnologies and Biomedical Engineering which was held on September 23-26, 2015 in Chisinau, Republic of Moldova. ICNBME-2015 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. It aims at bringing together scientists and engineers dealing with fundamental and applied research for reporting on the latest theoretical developments and applications involved in the fields. Topics include Nanotechnologies and nanomaterials Plasmonics and metamaterials Bio-micro/nano technologies Biomaterials Biosensors and sensors systems Biomedical instrumentation Biomedical signal processing Biomedical imaging and image processing Molecular, cellular and tissue engineering Clinical engineering, health technology management and assessment; Health informatics, e-health and telemedicine Biomedical engineering education Nuclear and radiation safety and security Innovations and technology transfer...

An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

Science.gov (United States)

Roth, G. S.; Teuschler, J. M.; Budde, W. L.

1982-07-01

The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

Development of the Computer Code to Determine an Individual Radionuclides in the Rad-wastes Container for Ulchin Units 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Kang, D.W.; Chi, J.H.; Goh, E.O. [Korea Electric Power Research Institute, Taejon (Korea)

2001-07-01

A computer program, RASSAY was developed to evaluate accurately the activities of various nuclides in the rad-waste container for Ulchin units 3 and 4. This is the final report of the project, {sup D}evelopment of the Computer Code to Determine an Individual Radionuclides in the Rad-wastes Container for Ulchin Units 3 and 4 and includes the followings; 1) Structure of the computer code, RASSAY 2) An example of surface dose calculation by computer simulation using MCNP code 3) Methods of sampling and activity measurement of various Rad-wastes. (author). 21 refs., 35 figs., 6 tabs.

Status and Update of the RaDIATE Collaboration R&D Program

Energy Technology Data Exchange (ETDEWEB)

Ammigan, K. [Fermilab; Hurh, P. [Fermilab

2017-07-01

The Radiation Damage In Accelerator Target Environments (RaDIATE) collaboration was founded in 2012 and currently consists of over 50 participants and 11 institutions globally. Due to the increasing power of future proton accelerator sources in target facilities, there is a critical need to further understand the physical and thermo-mechanical radiation response of target facility materials. Thus, the primary objective of the RaDIATE collaboration is to draw on existing expertise in the nuclear materials and accelerator targets fields to generate new and useful materials data for application within the accelerator and fission/fusion communities. Current research activities of the collaboration include post irradiation examination (PIE) of decommissioned components from existing beamlines such as the NuMI beryllium beam window and graphite NT-02 target material. PIE of these components includes advanced microstructural analyses (SEM/TEM, EBSD, EDS) and micro-mechanics technique such as nano-indentation, to help characterize any microstructural radiation damage incurred during operation. New irradiation campaigns of various candidate materials at both low and high energy beam facilities are also being pursued. Beryllium helium implantation studies at the University of Surrey as well as high energy proton irradiation of various materials at Brookhaven National Laboratory’s BLIP facility have been initiated. The program also extends to beam-induced thermal shock experiments using high intensity beam pulses at CERN’s HiRadMat facility, followed by advanced PIE activities to evaluate thermal shock resistance of the materials. Preliminary results from ongoing research activities, as well as the future plans of the RaDIATE collaboration R&D program will be discussed.

Status of R&D activity for ITER ICRF power source system

International Nuclear Information System (INIS)

Mukherjee, Aparajita; Trivedi, Rajesh; Singh, Raghuraj; Rajnish, Kumar; Machchhar, Harsha; Ajesh, P.; Suthar, Gajendra; Soni, Dipal; Patel, Manoj; Mohan, Kartik; Hari, J.V.S.; Anand, Rohit; Verma, Sriprakash; Agarwal, Rohit; Jha, Akhil; Kazarian, Fabienne; Beaumont, Bertrand

2015-01-01

Highlights: • R&D program to establish high power RF technology for ITER ICRF source is described. • R&D RF source is being developed using Diacrode & Tetrode technologies. • Test rig (3 MW/3600 s/35–65 MHz) simulating plasma load is developed. - Abstract: India is in-charge for the procurement of ITER Ion Cyclotron Resonance Frequency (ICRF) sources (1 Prototype + 8 series units) along with auxiliary power supplies and Local Control Unit. As there is no unique amplifier chain able to meet the output power specifications as per ITER requirement (2.5 MW per source at 35–65 MHz/CW/VSWR 2.0), two parallel three-stage amplifier chains along with a combiner circuit on the output side is considered. This kind of RF source will be unique in terms of its stringent specifications and building a first of its kind is always a challenge. An R&D phase has been initiated for establishing the technology considering single amplifier chain experimentation (1.5 MW/35–65 MHz/3600 s/VSWR 2.0) prior to Prototype and series production. This paper presents the status of R&D activity to resolve technological challenges involved and various infrastructures developed at ITER-India lab to support such operation.

Status of R&D activity for ITER ICRF power source system

Energy Technology Data Exchange (ETDEWEB)

Mukherjee, Aparajita, E-mail: aparajita.mukherjee@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar–382428 (India); Trivedi, Rajesh; Singh, Raghuraj; Rajnish, Kumar; Machchhar, Harsha; Ajesh, P.; Suthar, Gajendra; Soni, Dipal; Patel, Manoj; Mohan, Kartik; Hari, J.V.S.; Anand, Rohit; Verma, Sriprakash; Agarwal, Rohit; Jha, Akhil [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar–382428 (India); Kazarian, Fabienne; Beaumont, Bertrand [ITER Organization, CS 90 046, 13067 Sain-Paul-Les-Durance (France)

2015-10-15

Highlights: • R&D program to establish high power RF technology for ITER ICRF source is described. • R&D RF source is being developed using Diacrode & Tetrode technologies. • Test rig (3 MW/3600 s/35–65 MHz) simulating plasma load is developed. - Abstract: India is in-charge for the procurement of ITER Ion Cyclotron Resonance Frequency (ICRF) sources (1 Prototype + 8 series units) along with auxiliary power supplies and Local Control Unit. As there is no unique amplifier chain able to meet the output power specifications as per ITER requirement (2.5 MW per source at 35–65 MHz/CW/VSWR 2.0), two parallel three-stage amplifier chains along with a combiner circuit on the output side is considered. This kind of RF source will be unique in terms of its stringent specifications and building a first of its kind is always a challenge. An R&D phase has been initiated for establishing the technology considering single amplifier chain experimentation (1.5 MW/35–65 MHz/3600 s/VSWR 2.0) prior to Prototype and series production. This paper presents the status of R&D activity to resolve technological challenges involved and various infrastructures developed at ITER-India lab to support such operation.

The development of the code package PERMAK--3D//SC--1

International Nuclear Information System (INIS)

Bolobov, P. A.; Oleksuk, D. A.

2011-01-01

Code package PERMAK-3D//SC-1 was developed for performing pin-by-pin coupled neutronic and thermal hydraulic calculation of the core fragment of seven fuel assemblies and was designed on the basis of 3D multigroup pin-by-pin code PERMAK-3D and 3D (subchannel) thermal hydraulic code SC-1 The code package predicts axial and radial pin-by-pin power distribution and coolant parameters in stimulated region (enthalpies,, velocities,, void fractions,, boiling and DNBR margins).. The report describes some new steps in code package development. Some PERMAK-3D//SC-1 outcomes of WWER calculations are presented in the report. (Authors)

Programming Entity Framework Code First

CERN Document Server

Lerman, Julia

2011-01-01

Take advantage of the Code First data modeling approach in ADO.NET Entity Framework, and learn how to build and configure a model based on existing classes in your business domain. With this concise book, you'll work hands-on with examples to learn how Code First can create an in-memory model and database by default, and how you can exert more control over the model through further configuration. Code First provides an alternative to the database first and model first approaches to the Entity Data Model. Learn the benefits of defining your model with code, whether you're working with an exis

Energy technology R&D portfolio management: Modeling uncertain returns and market diffusion

International Nuclear Information System (INIS)

Bistline, John E.

2016-01-01

Highlights: • Analyzes energy R&D decisions with uncertainty in research outcomes and markets. • R&D is shown to be more valuable in second-best planning and policy environments. • Deterministic R&D approaches likely undervalue the optionality of technologies. - Abstract: The allocation of research and development (R&D) funds across a portfolio of programs must simultaneously consider uncertainty from research outcomes and from market acceptance of the resulting technologies. We introduce a stochastic R&D portfolio management framework for addressing both sources of uncertainty and present numerical results for energy technology R&D strategy under uncertainties in climate policy and natural gas prices. Numerical experiments indicate that R&D may be more valuable in second-best planning environments where decision-makers use expected-value approaches, and recourse investments occur after R&D has reduced costs. We also find that deterministic R&D valuation approaches likely overestimate the expected value of R&D success but undervalue the optionality and hedging potential of technologies relative to sequential decision-making approaches under uncertainty. The results also highlight the role of R&D in second-best policy environments.

Lead-based Fast Reactor Development Plan and R&D Status in China

International Nuclear Information System (INIS)

Wu Yican

2013-01-01

• Lead-based fast reactors have good potential for waste transmutation, fuel breeding and energy production, which has been selected by CAS as the advanced reactor development emphasis with the support of ADS program and MFE program. Sharing of technologies R&D is possible among GIF/ADS/Fusion. • The concepts and test strategy of series China lead-based fast reactors (CLEAR) have been developed. The preliminary engineering design and safety analysis of CLEAR-I are underway. • Technology R&D on CLEAR with series lead alloy loops and accelerator-based neutron generator have been constructed or under construction. • CLEAR series reactor design and construction have big challenges, widely international cooperation on reactor design and technology R&D is welcome

Implementation of Neutronics Analysis Code using the Features of Object Oriented Programming via Fortran90/95

Energy Technology Data Exchange (ETDEWEB)

Han, Tae Young; Cho, Beom Jin [KEPCO Nuclear Fuel, Daejeon (Korea, Republic of)

2011-05-15

The object-oriented programming (OOP) concept was radically established after 1990s and successfully involved in Fortran 90/95. The features of OOP are such as the information hiding, encapsulation, modularity and inheritance, which lead to producing code that satisfy three R's: reusability, reliability and readability. The major OOP concepts, however, except Module are not mainly used in neutronics analysis codes even though the code was written by Fortran 90/95. In this work, we show that the OOP concept can be employed to develop the neutronics analysis code, ASTRA1D (Advanced Static and Transient Reactor Analyzer for 1-Dimension), via Fortran90/95 and those can be more efficient and reasonable programming methods

Deliberation of Post 3.11 Fast Reactor R&D Strategy in Japan

International Nuclear Information System (INIS)

Kondo, Shunsuke

2013-01-01

• New nuclear energy strategy is still in the process of deliberation in Japan. Though many of idled plants will be restarted after renovation of their safety features in accordance with new safety rules set by the NRA, the contribution of nuclear power in Japan will probably not return to the level before 3.11. • Japan is in the process of reviewing its strategy for SFR R&D with a view to making it compatible with the new situation to be realized under new safety regulation as well as new energy strategy to be formulated within a year. • It is contemplated that major emphasis of the SFR R&D should be on a) the completion and use of MONJU, b) FR safety and c) waste minimization, not to mention the making effective use of our knowledge basis and research and engineering capabilities cultivated through the FaCT project in the development of sustainable nuclear energy systems worldwide for future generations of mankind. • Promotion of international cooperation should be an essential ingredient of the strategy

Transforming CyberSecurity R&D within the Department of Energy: Getting Ahead of The Threat

Energy Technology Data Exchange (ETDEWEB)

Frincke, Deborah A.; Catlett, Charlie; Siebenlist, Frank; Strelitz, Richard; Talbot, Ed; Worley, Brian

2008-01-01

This report outlines a preliminary response from DOE researchers to the following three questions: a) what are the key priorities w.r.t. cybersecurity R&D over the next decade? b) what would we recommend, in terms of a program, to address those priorities c) how would a DOE Office of Science program in this area complement other cybersecurity R&D initiatives such as NSF's or other agency programs?

Step by step parallel programming method for molecular dynamics code

International Nuclear Information System (INIS)

Orii, Shigeo; Ohta, Toshio

1996-07-01

Parallel programming for a numerical simulation program of molecular dynamics is carried out with a step-by-step programming technique using the two phase method. As a result, within the range of a certain computing parameters, it is found to obtain parallel performance by using the level of parallel programming which decomposes the calculation according to indices of do-loops into each processor on the vector parallel computer VPP500 and the scalar parallel computer Paragon. It is also found that VPP500 shows parallel performance in wider range computing parameters. The reason is that the time cost of the program parts, which can not be reduced by the do-loop level of the parallel programming, can be reduced to the negligible level by the vectorization. After that, the time consuming parts of the program are concentrated on less parts that can be accelerated by the do-loop level of the parallel programming. This report shows the step-by-step parallel programming method and the parallel performance of the molecular dynamics code on VPP500 and Paragon. (author)

Developments in Processing by Severe Plastic Deformation at the 3rd Pan American Materials Congress

Science.gov (United States)

Figueiredo, Roberto B.; Kawasaki, Megumi; Langdon, Terence G.

2017-10-01

The 3rd Pan American Materials Congress in San Diego, California, February 26-March 2, 2017, provided an opportunity to bring together many participants working in the field of severe plastic deformation. This article provides a brief review of these activities.

A note on duplication of R&D and R&D subsidies

OpenAIRE

Sami Dakhlia; Akram Temimi; Flavio Menezes

2004-01-01

We show that the presumed incompatibility of uncoordinated R&D and competition is not fundamental, but hinges on the nature of R&D spillovers. As a consequence, R&D subsidies may be more effective than previously thought.

R&D Proposal RD51 Extension Beyond 2018

CERN Document Server

Dalla Torre, S; Ropelewski, L; Titov, M

2018-01-01

The RD51 Collaboration, in charge of the development and dissemination of MicroPattern Gaseous Detectors (MPGD) since 2008, proposes to extend its ac-tivity, after 2018, for a further five-year term. Since the RD51 initial years, the community of MPGD developers and users has grown considerably. It is reflected by the many MPGD-based applications in high energy and nuclear physics experi-ments as well as in other basic and applied-research fields. They rely on the parallel progress of detector concepts and associated technologies. The cultural, infrastruc-ture and networking support offered by RD51 has been essential in this process. The rich portfolio of MPGD projects, under constant expansion, is accompanied by novel ideas on further developments and applications. The proposed next term of RD51 activities aims at bringing a number of de-tector concepts to maturity, initiating new projects and continuing the support to the community. Among leading proposed projects are ultrafast, high-rate MPGDs; discharg...

Probabilistic Decision Based Block Partitioning for Future Video Coding

KAUST Repository

Wang, Zhao

2017-11-29

In the latest Joint Video Exploration Team development, the quadtree plus binary tree (QTBT) block partitioning structure has been proposed for future video coding. Compared to the traditional quadtree structure of High Efficiency Video Coding (HEVC) standard, QTBT provides more flexible patterns for splitting the blocks, which results in dramatically increased combinations of block partitions and high computational complexity. In view of this, a confidence interval based early termination (CIET) scheme is proposed for QTBT to identify the unnecessary partition modes in the sense of rate-distortion (RD) optimization. In particular, a RD model is established to predict the RD cost of each partition pattern without the full encoding process. Subsequently, the mode decision problem is casted into a probabilistic framework to select the final partition based on the confidence interval decision strategy. Experimental results show that the proposed CIET algorithm can speed up QTBT block partitioning structure by reducing 54.7% encoding time with only 1.12% increase in terms of bit rate. Moreover, the proposed scheme performs consistently well for the high resolution sequences, of which the video coding efficiency is crucial in real applications.

Report from the 3rd Workshop on Extremely Large Databases

Directory of Open Access Journals (Sweden)

Jacek Becla

2010-02-01

Full Text Available Academic and industrial users are increasingly facing the challenge of petabytes of data, but managing and analyzing such large data sets still remains a daunting task. Both the database and the map/reduce communities worldwide are working on addressing these issues. The 3rdExtremely Large Databases workshop was organized to examine the needs of scientific communities beginning to face these issues, to reach out to European communities working on extremely large scale data challenges, and to brainstorm possible solutions. The science benchmark that emerged from the 2nd workshop in this series was also debated. This paper is the final report of the discussions and activities at this workshop.

A 3D-CFD code for accurate prediction of fluid flows and fluid forces in seals

Science.gov (United States)

Athavale, M. M.; Przekwas, A. J.; Hendricks, R. C.

1994-01-01

Current and future turbomachinery requires advanced seal configurations to control leakage, inhibit mixing of incompatible fluids and to control the rotodynamic response. In recognition of a deficiency in the existing predictive methodology for seals, a seven year effort was established in 1990 by NASA's Office of Aeronautics Exploration and Technology, under the Earth-to-Orbit Propulsion program, to develop validated Computational Fluid Dynamics (CFD) concepts, codes and analyses for seals. The effort will provide NASA and the U.S. Aerospace Industry with advanced CFD scientific codes and industrial codes for analyzing and designing turbomachinery seals. An advanced 3D CFD cylindrical seal code has been developed, incorporating state-of-the-art computational methodology for flow analysis in straight, tapered and stepped seals. Relevant computational features of the code include: stationary/rotating coordinates, cylindrical and general Body Fitted Coordinates (BFC) systems, high order differencing schemes, colocated variable arrangement, advanced turbulence models, incompressible/compressible flows, and moving grids. This paper presents the current status of code development, code demonstration for predicting rotordynamic coefficients, numerical parametric study of entrance loss coefficients for generic annular seals, and plans for code extensions to labyrinth, damping, and other seal configurations.

DOE/OE Load as a Resource R&D Overview

Energy Technology Data Exchange (ETDEWEB)

Ton, Dan T. [U.S. Dept. of Energy, Washington, DC (United States)

2011-10-25

DOE R&D and OE’s PSA and ISER programs support OE’s mission to modernize electric grid, enhance energy infrastructure security and reliability, and facilitate recovery from energy supply disruptions.

Contributions to the validation of advanced codes for accident analysis calculations with 3-dimensional neutron kinetics. STC with the Ukraine. Final report

International Nuclear Information System (INIS)

Grundmann, U.; Kliem, S.; Rohde, U.; Khalimonchuk, V.; Kuchin, A.; Seidel, A.

2000-10-01

In the frame of a project of scientific-technical cooperation funded by BMBF/BMWi, the coupled code ATHLET-DYN3D has been transferred to the Scientific and Technical Centre on Nuclear and Radiation Safety Kiev (Ukraine). This program code represents an implementation of the 3D core model DYN3D developed by FZR into the GRS thermohydraulics code system ATHLET. For the purpose of validation of this coupled code, a measurement data base has been generated. In the data base suitable experimental data for operational transients from NPPs are collected. The data collection and documentation was performed in accordance with a directive about requirements to measurement data for code validation, which has been elaborated within the project. The validation calculations have been performed for two selected transients. The results of these calculations were compared with measurement values from the data base. The function of the code DYN3D was expanded with a subroutine for reactivity coefficients calculation. Using this modification of the code DYN3D, investigations of reactivity contributions on different operational processes can be performed. (orig.) [de

Extensions of the 3-dimensional plasma transport code E3D

International Nuclear Information System (INIS)

Runov, A.; Schneider, R.; Kasilov, S.; Reiter, D.

2004-01-01

One important aspect of modern fusion research is plasma edge physics. Fluid transport codes extending beyond the standard 2-D code packages like B2-Eirene or UEDGE are under development. A 3-dimensional plasma fluid code, E3D, based upon the Multiple Coordinate System Approach and a Monte Carlo integration procedure has been developed for general magnetic configurations including ergodic regions. These local magnetic coordinates lead to a full metric tensor which accurately accounts for all transport terms in the equations. Here, we discuss new computational aspects of the realization of the algorithm. The main limitation to the Monte Carlo code efficiency comes from the restriction on the parallel jump of advancing test particles which must be small compared to the gradient length of the diffusion coefficient. In our problems, the parallel diffusion coefficient depends on both plasma and magnetic field parameters. Usually, the second dependence is much more critical. In order to allow long parallel jumps, this dependence can be eliminated in two steps: first, the longitudinal coordinate x 3 of local magnetic coordinates is modified in such a way that in the new coordinate system the metric determinant and contra-variant components of the magnetic field scale along the magnetic field with powers of the magnetic field module (like in Boozer flux coordinates). Second, specific weights of the test particles are introduced. As a result of increased parallel jump length, the efficiency of the code is about two orders of magnitude better. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Short binary convolutional codes with maximal free distance for rates 2/3 and 3/4

DEFF Research Database (Denmark)

Paaske, Erik

1974-01-01

. Farther, the search among the remaining codes is started in a subset in which we expect the possibility of finding codes with large values ofd_{free}to be good. A number of short, optimum (in the sense of maximizingd_{free}), rate-2/3 and 3/4 codes found by the search procedure are listed.......A search procedure is developed to find good short binary(N,N - 1)convolutional codes. It uses simple rules to discard from the complete ensemble of codes a large fraction whose free distanced_{free}either cannot achieve the maximum value or is equal tod_{free}of some code in the remaining set...

R&D Nuggets

Science.gov (United States)

RSS Archive Videos XML DOE R&D Accomplishments DOE R&D Accomplishments searchQuery × Find searchQuery x Find DOE R&D Acccomplishments Navigation dropdown arrow The Basics dropdown arrow Home About &D Nuggets Database dropdown arrow Search Tag Cloud Browse Reports Database Help Finding Aids

Outsourcing R&D

DEFF Research Database (Denmark)

Hsuan, Juliana; Mahnke, Volker

2011-01-01

Outsourcing R&D is an increasingly explored corporate practice. Extant research advanced our initial understanding of its increasing importance and benefits. While the associated literature has blossomed, the enthusiasm of R&D managers is tenured by an increasing realization of the possible......&D, suggest a simple, yet integrative model on the relation between outsourcing R&D and performance, and offer a research agenda that is instrumental in guiding companies’ process-management and design strategies when seeking to benefit from the outsourcing of R&D....

3rd International Symposium on Big Data and Cloud Computing Challenges

CERN Document Server

Neelanarayanan, V

2016-01-01

This proceedings volume contains selected papers that were presented in the 3rd International Symposium on Big data and Cloud Computing Challenges, 2016 held at VIT University, India on March 10 and 11. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data and Cloud Computing are identified and presented throughout the book, which is intended for researchers, scholars, students, software developers and practitioners working at the forefront in their field. This book acts as a platform for exchanging ideas, setting questions for discussion, and sharing the experience in Big Data and Cloud Computing domain.

Proceedings of the 3rd NINS symposium on engineering and technology

International Nuclear Information System (INIS)

2008-10-01

The 3rd NINS Symposium on Engineering and Technology was held on 24-25, July 2008 at National Institute for Fusion Science (NIFS), organized by Department of Engineering and Technical Services, NIFS. This Symposium is continuation of an annual series. The 1st one was held on 25-26 July, 2006 organized by National Astronomical Observatory of Japan. The 2nd one was held on 25-26 June, 2007 organized by Institute for Molecular Science. This proceedings is a compilation of papers presented at the symposium. 49 participants from 5 institutes of NINS attended this symposium and 23 papers were presented. (author)

Microgravity computing codes. User's guide

Science.gov (United States)

1982-01-01

Codes used in microgravity experiments to compute fluid parameters and to obtain data graphically are introduced. The computer programs are stored on two diskettes, compatible with the floppy disk drives of the Apple 2. Two versions of both disks are available (DOS-2 and DOS-3). The codes are written in BASIC and are structured as interactive programs. Interaction takes place through the keyboard of any Apple 2-48K standard system with single floppy disk drive. The programs are protected against wrong commands given by the operator. The programs are described step by step in the same order as the instructions displayed on the monitor. Most of these instructions are shown, with samples of computation and of graphics.

Simulation in 3 dimensions of a cycle 18 months for an BWR type reactor using the Nod3D program

International Nuclear Information System (INIS)

Hernandez, N.; Alonso, G.; Valle, E. del

2004-01-01

The development of own codes that you/they allow the simulation in 3 dimensions of the nucleus of a reactor and be of easy maintenance, without the consequent payment of expensive use licenses, it can be a factor that propitiates the technological independence. In the Department of Nuclear Engineering (DIN) of the Superior School of Physics and Mathematics (ESFM) of the National Polytechnic Institute (IPN) a denominated program Nod3D has been developed with the one that one can simulate the operation of a reactor BWR in 3 dimensions calculating the effective multiplication factor (kJJ3, as well as the distribution of the flow neutronic and of the axial and radial profiles of the power, inside a means of well-known characteristics solving the equations of diffusion of neutrons numerically in stationary state and geometry XYZ using the mathematical nodal method RTN0 (Raviart-Thomas-Nedelec of index zero). One of the limitations of the program Nod3D is that it doesn't allow to consider the burnt of the fuel in an independent way considering feedback, this makes it in an implicit way considering the effective sections in each step of burnt and these sections are obtained of the code Core Master LEND. However even given this limitation, the results obtained in the simulation of a cycle of typical operation of a reactor of the type BWR are similar to those reported by the code Core Master LENDS. The results of the keJ - that were obtained with the program Nod3D they were compared with the results of the code Core Master LEND, presenting a difference smaller than 0.2% (200 pcm), and in the case of the axial profile of power, the maxim differs it was of 2.5%. (Author)

Improved side information generation for distributed video coding

DEFF Research Database (Denmark)

Huang, Xin; Forchhammer, Søren

2008-01-01

As a new coding paradigm, distributed video coding (DVC) deals with lossy source coding using side information to exploit the statistics at the decoder to reduce computational demands at the encoder. The performance of DVC highly depends on the quality of side information. With a better side...... information generation method, fewer bits will be requested from the encoder and more reliable decoded frames will be obtained. In this paper, a side information generation method is introduced to further improve the rate-distortion (RD) performance of transform domain distributed video coding. This algorithm...

Reactive flow simulation in complex 3D geometries using the COM3D code

International Nuclear Information System (INIS)

Breitung, W.; Kotchourko, A.; Veser, A.; Scholtyssek, W.

1999-01-01

The COM3D code, under development at the Forschungszentrum Karlsruhe (FZK), is a 3-d CFD code to describe turbulent combustion phenomena in complex geometries. It is intended to be part of the advanced integral code system for containment analysis (INCA) which includes in addition GASFLOW for distribution calculations, V3D for slow combustion and DET3D for detonation analysis. COM3D uses a TVD-solver and optional models for turbulence, chemistry and thermodynamics. The hydrodynamic model considers mass, momentum and energy conservation. Advanced procedures were provided to facilitate grid-development for complex 3-d structures. COM3D was validated on experiments performed on different scales with generally good agreement for important physical quantities. The code was applied to combustion analysis of a large PWR. The initial conditions were obtained from a GASFLOW distribution analysis for a LOOP scenario. Results are presented concerning flame propagation and pressure evolution in the containment which clearly demonstrate the effects of internal structures, their influence on turbulence formation and consequences for local loads. (author)

International R&D Spillovers and Marginal Social Returns on R&D

NARCIS (Netherlands)

Sterken, Elmer; Ogawa, Kazuo; Tokutsu, Ichiro

2016-01-01

We analyze the impact of international R&D spillovers on recipient countries in terms of social and private returns. We divide the aggregate R&D stock by the business, government and education sectors and examine the impact on Total Factor Productivity. We endogenize the accrual of the R&D stocks by

Subsidizing R&D cooperatives

NARCIS (Netherlands)

Hinloopen, J.

2001-01-01

A framework is developed with which the implementation of two commonly used R&D-stimulating policies can be evaluated: providing R&D subsidies and sustaining the formation of R&D cooperatives. Subsidized R&D cooperatives can also be analyzed. The analysis shows that providing R&D subsidies is more

A new coupling of the 3D thermal-hydraulic code THYC and the thermo-mechanical code CYRANO3 for PWR calculations

Energy Technology Data Exchange (ETDEWEB)

Marguet, S.D. [Electricite de France (EDF), 92 - Clamart (France)

1997-12-31

Among all parameters, the fuel temperature has a significant influence on the reactivity of the core, because of the Doppler effect on cross-sections. Most neutronic codes use a straightforward method to calculate an average fuel temperature used in their specific feed-back models. For instance, EDF`s neutronic code COCCINELLE uses the Rowland`s formula using the temperatures of the center and the surface of the pellet. COCCINELLE is coupled to the 3D thermal-hydraulic code THYC with calculates TDoppler with is standard thermal model. In order to improve the accuracy of such calculations, we have developed the coupling of our two latest codes in thermal-hydraulics (THYC) and thermo-mechanics (CYRANO3). THYC calculates two-phase flows in pipes or rod bundles and is used for transient calculations such as steam-line break, boron dilution accidents, DNB predictions, steam generator and condenser studies. CYRANO3 calculates most of the phenomena that take place in the fuel such as: 1) heat transfer induced by nuclear power; 2) thermal expansion of the fuel and the cladding; 3) release of gaseous fission`s products; 4) mechanical interaction between the pellet and the cladding. These two codes are now qualified in their own field and the coupling, using Parallel Virtual Machine (PVM) libraries customized in an home-made-easy-to-use package called CALCIUM, has been validated on `low` configurations (no thermal expansion, constant thermal characteristics) and used on accidental transients such as rod ejection and loss of coolant accident. (K.A.) 7 refs.

A new coupling of the 3D thermal-hydraulic code THYC and the thermo-mechanical code CYRANO3 for PWR calculations

International Nuclear Information System (INIS)

Marguet, S.D.

1997-01-01

Among all parameters, the fuel temperature has a significant influence on the reactivity of the core, because of the Doppler effect on cross-sections. Most neutronic codes use a straightforward method to calculate an average fuel temperature used in their specific feed-back models. For instance, EDF's neutronic code COCCINELLE uses the Rowland's formula using the temperatures of the center and the surface of the pellet. COCCINELLE is coupled to the 3D thermal-hydraulic code THYC with calculates TDoppler with is standard thermal model. In order to improve the accuracy of such calculations, we have developed the coupling of our two latest codes in thermal-hydraulics (THYC) and thermo-mechanics (CYRANO3). THYC calculates two-phase flows in pipes or rod bundles and is used for transient calculations such as steam-line break, boron dilution accidents, DNB predictions, steam generator and condenser studies. CYRANO3 calculates most of the phenomena that take place in the fuel such as: 1) heat transfer induced by nuclear power; 2) thermal expansion of the fuel and the cladding; 3) release of gaseous fission's products; 4) mechanical interaction between the pellet and the cladding. These two codes are now qualified in their own field and the coupling, using Parallel Virtual Machine (PVM) libraries customized in an home-made-easy-to-use package called CALCIUM, has been validated on 'low' configurations (no thermal expansion, constant thermal characteristics) and used on accidental transients such as rod ejection and loss of coolant accident. (K.A.)

Code system for fast reactor neutronics analysis

International Nuclear Information System (INIS)

Nakagawa, Masayuki; Abe, Junji; Sato, Wakaei.

1983-04-01

A code system for analysis of fast reactor neutronics has been developed for the purpose of handy use and error reduction. The JOINT code produces the input data file to be used in the neutronics calculation code and also prepares the cross section library file with an assigned format. The effective cross sections are saved in the PDS file with an unified format. At the present stage, this code system includes the following codes; SLAROM, ESELEM5, EXPANDA-G for the production of effective cross sections and CITATION-FBR, ANISN-JR, TWOTRAN2, PHENIX, 3DB, MORSE, CIPER and SNPERT. In the course of the development, some utility programs and service programs have been additionaly developed. These are used for access of PDS file, edit of the cross sections and graphic display. Included in this report are a description of input data format of the JOINT and other programs, and of the function of each subroutine and utility programs. The usage of PDS file is also explained. In Appendix A, the input formats are described for the revised version of the CIPER code. (author)

3rd International Doctoral Symposium on Applied Computation and Security Systems

CERN Document Server

Saeed, Khalid; Cortesi, Agostino; Chaki, Nabendu

2017-01-01

This book presents extended versions of papers originally presented and discussed at the 3rd International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2016) held from August 12 to 14, 2016 in Kolkata, India. The symposium was jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy; and the University of Calcutta, India. The book is divided into two volumes, Volumes 3 and 4, and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next-Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering. The first two volumes of the book published the works presented at the ACSS 2015, which was held from May 23 to 25, 2015 in Kolkata, India.

SuperB R&D computing program: HTTP direct access to distributed resources

Science.gov (United States)

Fella, A.; Bianchi, F.; Ciaschini, V.; Corvo, M.; Delprete, D.; Diacono, D.; Di Simone, A.; Franchini, P.; Donvito, G.; Giacomini, F.; Gianoli, A.; Longo, S.; Luitz, S.; Luppi, E.; Manzali, M.; Pardi, S.; Perez, A.; Rama, M.; Russo, G.; Santeramo, B.; Stroili, R.; Tomassetti, L.

2012-12-01

The SuperB asymmetric energy e+e- collider and detector to be built at the newly founded Nicola Cabibbo Lab will provide a uniquely sensitive probe of New Physics in the flavor sector of the Standard Model. Studying minute effects in the heavy quark and heavy lepton sectors requires a data sample of 75 ab-1 and a luminosity target of 1036cm-2s-1. The increasing network performance also in the Wide Area Network environment and the capability to read data remotely with good efficiency are providing new possibilities and opening new scenarios in the data access field. Subjects like data access and data availability in a distributed environment are key points in the definition of the computing model for an HEP experiment like SuperB. R&D efforts in such a field have been brought on during the last year in order to release the Computing Technical Design Report within 2013. WAN direct access to data has been identified as one of the more interesting viable option; robust and reliable protocols as HTTP/WebDAV and xrootd are the subjects of a specific R&D line in a mid-term scenario. In this work we present the R&D results obtained in the study of new data access technologies for typical HEP use cases, focusing on specific protocols such as HTTP and WebDAV in Wide Area Network scenarios. Reports on efficiency, performance and reliability tests performed in a data analysis context have been described. Future R&D plan includes HTTP and xrootd protocols comparison tests, in terms of performance, efficiency, security and features available.

Contributions of the ORNL piping program to nuclear piping design codes and standards

International Nuclear Information System (INIS)

Moore, S.E.

1975-11-01

The ORNL Piping Program was conceived and established to develop basic information on the structural behavior of nuclear power plant piping components and to prepare this information in forms suitable for use in design analysis and codes and standards. One of the objectives was to develop and qualify stress indices and flexibility factors for direct use in Code-prescribed design analysis methods. Progress in this area is described

The role of non-coding RNAs in cytoplasmic male sterility in flowering plants

Czech Academy of Sciences Publication Activity Database

Štorchová, Helena

2017-01-01

Roč. 18, č. 11 (2017), č. článku 2429. E-ISSN 1422-0067 R&D Projects: GA ČR GA16-09220S Institutional support: RVO:61389030 Keywords : Cytoplasmic male sterility * Gene expression * Global transcriptome * Non-coding RNA * Pollen development Subject RIV: EF - Botanics OBOR OECD: Plant sciences, botany Impact factor: 3.226, year: 2016

NSLINK, Coupling of NJOY Cross-Sections Generator Code to SCALE-3 System

International Nuclear Information System (INIS)

De Leege, P.F.A

1991-01-01

1 - Description of program or function: NSLINK (NJOY - SCALE - LINK) is a set of computer codes to couple the NJOY cross-section generation code to the SCALE-3 code system (using AMPX-2 master library format) retaining the Nordheim resolved resonance treatment option. 2 - Method of solution: The following module and codes are included in NSLINK: XLACSR: This module is a stripped-down version of the XLACS-2 code. The module passes all l=0 resonance parameters as well as the contribution from all other resonances to the group cross-sections, the contribution from the wings of the l=0 resonances, the background cross-section and possible interference for multilevel Breit-Wigner resonance parameters. The group cross-sections are stored in the appropriate 1-D cross-section arrays. The output file has AMPX-2 master format. The original NJOY code is used to calculate all other data. The XLACSR module is included in the NJOY code. MILER: This code converts NJOY output (GENDF format) to AMPX-2 master format. The code is an extensively revised version of the original MILER code. In addition, the treatment of thermal scattering matrices at different temperatures is included. UNITABR: This code is a revised version of the UNITAB code. It merges the output of XLACSR and MILER in such a way that contributions from the bodies of the l=0 resonances in the resolved energy range, calculated by XLACSR, are subtracted from the 1-D group cross-section arrays for fission (MT=18) and neutron capture (MT=102). The l=0 resonance parameters and the contributions from the bodies of these resonances are added separately (MT=1023, 1022 and 1021). The total cross-section (MT=1), the absorption cross- section (MT=27) and the neutron removal cross-section (MT=101) values are adjusted. In the case of Bondarenko data, infinite dilution values of the cross-sections (MT=1, 18 and 102) are changed in the same way as the 1-D cross-section. The output file of UNITABR is in AMPX-2 master format and

Visualization of RELAP5-3D best estimate code

International Nuclear Information System (INIS)

Mesina, G.L.

2004-01-01

The Idaho National Engineering Laboratory has developed a number of nuclear plant analysis codes such as RELAP5-3D, SCDAP/RELAP5-3D, and FLUENT/RELAP5-3D that have multi-dimensional modeling capability. The output of these codes is very difficult to analyze without the aid of visualization tools. The RELAP5-3D Graphical User Interface (RGUI) displays these calculations on plant images, functional diagrams, graphs, and by other means. These representations of the data enhance the analysts' ability to recognize plant behavior visually and reduce the difficulty of analyzing complex three-dimensional models. This paper describes the Graphical User Interface system for the RELAP5-3D suite of Best Estimate codes. The uses of the Graphical User Interface are illustrated. Examples of user problems solved by use of this interface are given. (author)

Fast convolutional sparse coding using matrix inversion lemma

Czech Academy of Sciences Publication Activity Database

Šorel, Michal; Šroubek, Filip

2016-01-01

Roč. 55, č. 1 (2016), s. 44-51 ISSN 1051-2004 R&D Projects: GA ČR GA13-29225S Institutional support: RVO:67985556 Keywords : Convolutional sparse coding * Feature learning * Deconvolution networks * Shift-invariant sparse coding Subject RIV: JD - Computer Applications, Robotics Impact factor: 2.337, year: 2016 http://library.utia.cas.cz/separaty/2016/ZOI/sorel-0459332.pdf

Sequence Coding and Search System Backfit Quality Assurance Program Plan

International Nuclear Information System (INIS)

Lovell, C.J.; Stepina, P.L.

1985-03-01

The Sequence Coding and Search System is a computer-based encoding system for events described in Licensee Event Reports. This data system contains LERs from 1981 to present. Backfit of the data system to include LERs prior to 1981 is required. This report documents the Quality Assurance Program Plan that EG and G Idaho, Inc. will follow while encoding 1980 LERs

An Optimal Linear Coding for Index Coding Problem

OpenAIRE

Pezeshkpour, Pouya

2015-01-01

An optimal linear coding solution for index coding problem is established. Instead of network coding approach by focus on graph theoric and algebraic methods a linear coding program for solving both unicast and groupcast index coding problem is presented. The coding is proved to be the optimal solution from the linear perspective and can be easily utilize for any number of messages. The importance of this work is lying mostly on the usage of the presented coding in the groupcast index coding ...

BLAKE - A Thermodynamics Code Based on TIGER: Users' Guide to the Revised Program

National Research Council Canada - National Science Library

Freedman, Eli

1998-01-01

.... This code, which was derived from the original version of SRI's TIGER program, is intended primarily for making calculations on the combustion products from conventional military and electrically...

Distributed video coding with multiple side information

DEFF Research Database (Denmark)

Huang, Xin; Brites, C.; Ascenso, J.

2009-01-01

Distributed Video Coding (DVC) is a new video coding paradigm which mainly exploits the source statistics at the decoder based on the availability of some decoder side information. The quality of the side information has a major impact on the DVC rate-distortion (RD) performance in the same way...... the quality of the predictions had a major impact in predictive video coding. In this paper, a DVC solution exploiting multiple side information is proposed; the multiple side information is generated by frame interpolation and frame extrapolation targeting to improve the side information of a single...

Development of a computer program to support an efficient non-regression test of a thermal-hydraulic system code

Energy Technology Data Exchange (ETDEWEB)

Lee, Jun Yeob; Jeong, Jae Jun [School of Mechanical Engineering, Pusan National University, Busan (Korea, Republic of); Suh, Jae Seung [System Engineering and Technology Co., Daejeon (Korea, Republic of); Kim, Kyung Doo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

During the development process of a thermal-hydraulic system code, a non-regression test (NRT) must be performed repeatedly in order to prevent software regression. The NRT process, however, is time-consuming and labor-intensive. Thus, automation of this process is an ideal solution. In this study, we have developed a program to support an efficient NRT for the SPACE code and demonstrated its usability. This results in a high degree of efficiency for code development. The program was developed using the Visual Basic for Applications and designed so that it can be easily customized for the NRT of other computer codes.

Vectorization, parallelization and porting of nuclear codes. 2001

International Nuclear Information System (INIS)

Akiyama, Mitsunaga; Katakura, Fumishige; Kume, Etsuo; Nemoto, Toshiyuki; Tsuruoka, Takuya; Adachi, Masaaki

2003-07-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the super computer system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. We dealt with 10 codes in fiscal 2001. In this report, the parallelization of Neutron Radiography for 3 Dimensional CT code NR3DCT, the vectorization of unsteady-state heat conduction code THERMO3D, the porting of initial program of MHD simulation, the tuning of Heat And Mass Balance Analysis Code HAMBAC, the porting and parallelization of Monte Carlo N-Particle transport code MCNP4C3, the porting and parallelization of Monte Carlo N-Particle transport code system MCNPX2.1.5, the porting of induced activity calculation code CINAC-V4, the use of VisLink library in multidimensional two-fluid model code ACD3D and the porting of experiment data processing code from GS8500 to SR8000 are described. (author)

R&D 100 Awards | NREL

Science.gov (United States)

R&D 100 Awards R&D 100 Awards NREL has won 61 R&D 100 Awards. Widely recognized as the Oscars of Invention, the R&D 100 Awards are presented by R&D Magazine to identify and celebrate the top technological advances of the year. Recent R&D 100 Awards 2016 NREL engineers Chuck Booten

Analysis of RELAP/SCDAPSIM/MOD3.2 Computer Code using QUENCH Experiments

International Nuclear Information System (INIS)

Honaiser, Eduardo; Anghaie, Samim

2004-01-01

The experiments QUENCH-01/06 were modelled using RELAP5/SCDAPSIM MOD3.2(bd) computer code. The results obtained from these models were compared to the experimental data to evaluate the code performance. The experiments were performed in the Forschungszentrum Karlsruhe (FZK), Germany. The objective of the experimental program was the investigation of the core behaviour during a severe accident, focusing on rod claddings overheat due to zirconium oxidation at high temperatures and due to the strong thermal gradient developed when the nuclear reactor core is flooded as part of an accident management measure. Temperatures histories and hydrogen production were compared. Molecular hydrogen is a product of the oxidation reaction, serving as a parameter to measure the oxidation reaction. After some model adjustments, good predictions were possible. The temperatures and the hydrogen production parameters stayed, most of the transient time, inside the uncertainty envelop. (authors)

RD-MolPack technology for the constitutive production of self-inactivating lentiviral vectors pseudotyped with the nontoxic RD114-TR envelope.

Science.gov (United States)

Marin, Virna; Stornaiuolo, Anna; Piovan, Claudia; Corna, Stefano; Bossi, Sergio; Pema, Monika; Giuliani, Erica; Scavullo, Cinzia; Zucchelli, Eleonora; Bordignon, Claudio; Rizzardi, Gian Paolo; Bovolenta, Chiara

2016-01-01

To date, gene therapy with transiently derived lentivectors has been very successful to cure rare infant genetic diseases. However, transient manufacturing is unfeasible to treat adult malignancies because large vector lots are required. By contrast, stable manufacturing is the best option for high-incidence diseases since it reduces the production cost, which is the major current limitation to scale up the transient methods. We have previously developed the proprietary RD2-MolPack technology for the stable production of second-generation lentivectors, based on the RD114-TR envelope. Of note, opposite to vesicular stomatitis virus glycoprotein (VSV-G) envelope, RD114-TR does not need inducible expression thanks to lack of toxicity. Here, we present the construction of RD2- and RD3-MolPack cells for the production of self-inactivating lentivectors expressing green fluorescent protein (GFP) as a proof-of-concept of the feasibility and safety of this technology before its later therapeutic exploitation. We report that human T lymphocytes transduced with self-inactivating lentivectors derived from RD3-MolPack cells or with self-inactivating VSV-G pseudotyped lentivectors derived from transient transfection show identical T-cell memory differentiation phenotype and comparable transduction efficiency in all T-cell subsets. RD-MolPack technology represents, therefore, a straightforward tool to simplify and standardize lentivector manufacturing to engineer T-cells for frontline immunotherapy applications.

Biocomputational prediction of small non-coding RNAs in Streptomyces

Czech Academy of Sciences Publication Activity Database

Pánek, Josef; Bobek, Jan; Mikulík, Karel; Basler, Marek; Vohradský, Jiří

2008-01-01

Roč. 9, č. 217 (2008), s. 1-14 ISSN 1471-2164 R&D Projects: GA ČR GP204/07/P361; GA ČR GA203/05/0106; GA ČR GA310/07/1009 Grant - others:XE(XE) EC Integrated Project ActinoGEN, LSHM-CT-2004-005224. Institutional research plan: CEZ:AV0Z50200510 Keywords : non-coding RNA * streptomyces * biocomputational prediction Subject RIV: IN - Informatics, Computer Science Impact factor: 3.926, year: 2008

3rd International Meeting for Researchers in Materials and Plasma Technology (IMRMPT) and 1st Symposium on Nanoscience and Nanotechnology

International Nuclear Information System (INIS)

2016-01-01

These proceedings present the written contributions of the participants of the 3rd International Meeting for Researchers in Materials and Plasma Technology (3rd IMRMPT) and the 1st Symposium on Nanoscience and Nanotechnology which was held from 4 to May 9, 2015 at the Dann Carlton Hotel Bucaramanga, Colombia, organized by the faculty of science of the Universidad Industrial de Santander (UIS) and the basic science department of the Universidad Pontificia Bolivariana. This was the third version of biennial meetings that began in 2011. The five-day scientific program of the 3rd IMRMPT consisted of 24 Magisterial Conferences, 70 Oral Presentations, 185 Poster Presentations, 3 Courses and 1 Discussion Panel with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, Germany, France, Spain, England, United States, Mexico, Argentina, Uruguay, Brazil, Venezuela, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish a network of scientific cooperation with a global impact in the area of the science and the technology of materials; to promote the exchange of creative ideas and the effective transfer of scientific knowledge, from fundamental research to innovation applied to industrial solutions and to advances in the development of new research allowing to increase the lifetime of the materials used in the industry by means of efficient transference of the knowledge between sectors academia and industry. The topics covered in the 3rd IMRMPT include New Materials, Surface Physics, Structural Integrity, Renewable Energy, Online Process Control, Non Destructive Evaluation, Characterization of Materials, Laser and Hybrid Processes, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion/Oxidation, Plasma Applications and Technologies, Modelling, Simulation and Diagnostics, Biomedical Coatings, Surface Treatments

Safety, codes and standards for hydrogen installations. Metrics development and benchmarking

Energy Technology Data Exchange (ETDEWEB)

Harris, Aaron P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dedrick, Daniel E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); San Marchi, Christopher W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-04-01

Automakers and fuel providers have made public commitments to commercialize light duty fuel cell electric vehicles and fueling infrastructure in select US regions beginning in 2014. The development, implementation, and advancement of meaningful codes and standards is critical to enable the effective deployment of clean and efficient fuel cell and hydrogen solutions in the energy technology marketplace. Metrics pertaining to the development and implementation of safety knowledge, codes, and standards are important to communicate progress and inform future R&D investments. This document describes the development and benchmarking of metrics specific to the development of hydrogen specific codes relevant for hydrogen refueling stations. These metrics will be most useful as the hydrogen fuel market transitions from pre-commercial to early-commercial phases. The target regions in California will serve as benchmarking case studies to quantify the success of past investments in research and development supporting safety codes and standards R&D.

Automated Source Code Analysis to Identify and Remove Software Security Vulnerabilities: Case Studies on Java Programs

OpenAIRE

Natarajan Meghanathan

2013-01-01

The high-level contribution of this paper is to illustrate the development of generic solution strategies to remove software security vulnerabilities that could be identified using automated tools for source code analysis on software programs (developed in Java). We use the Source Code Analyzer and Audit Workbench automated tools, developed by HP Fortify Inc., for our testing purposes. We present case studies involving a file writer program embedded with features for password validation, and ...

Synthesizing Certified Code

Science.gov (United States)

Whalen, Michael; Schumann, Johann; Fischer, Bernd

2002-01-01

Code certification is a lightweight approach to demonstrate software quality on a formal level. Its basic idea is to require producers to provide formal proofs that their code satisfies certain quality properties. These proofs serve as certificates which can be checked independently. Since code certification uses the same underlying technology as program verification, it also requires many detailed annotations (e.g., loop invariants) to make the proofs possible. However, manually adding theses annotations to the code is time-consuming and error-prone. We address this problem by combining code certification with automatic program synthesis. We propose an approach to generate simultaneously, from a high-level specification, code and all annotations required to certify generated code. Here, we describe a certification extension of AUTOBAYES, a synthesis tool which automatically generates complex data analysis programs from compact specifications. AUTOBAYES contains sufficient high-level domain knowledge to generate detailed annotations. This allows us to use a general-purpose verification condition generator to produce a set of proof obligations in first-order logic. The obligations are then discharged using the automated theorem E-SETHEO. We demonstrate our approach by certifying operator safety for a generated iterative data classification program without manual annotation of the code.

Linac-augmented light sources : an incremental concept for enhancing the capabilities of existing 3rd-generation storage rings

International Nuclear Information System (INIS)

Lewellen, J. W.

2003-01-01

Planned and proposed 4th-generation x-ray sources, such as energy-recovery linacs (ERLs) and single-pass x-ray free-electron lasers (X-FELs) offer a number of potential advantages, including small source size, higher peak brightness, ultrashort pulses, and potentially temporally and transversely coherent pulses. While offering unique capabilities, such facilities will also offer several important limitations, including limited numbers of user beamlines (for FELs) and a pulse-repetition rate that may be too high for many dynamics experiments (ERLs). In addition, there are many technical challenges associated with both types of facilities. A third type of facility, exemplified by the Short Pulse Photon Source (SPPS) at SLAC [1], would support neither a large number of users simultaneously nor generate coherent pulses, but would generate very intense, short x-ray pulses. Such a facility could serve as the starting point for either an ERL or an X-FEL, or a combined, hybrid machine. For the foreseeable future, however, existing 3rd-generation light source storage rings, such as the Advanced Photon Source, will continue to play important roles in supporting scientific research utilizing high-brightness x-rays. Existing facilities offer the powerful combination of a large number of user beamlines, efficient use of electron beam energy, and established user communities, and a program of incremental investment in, and improvements to, these facilities should continue to pay dividends into the future. This document discusses potential upgrade paths based on the Advanced Photon Source (APS) as a model 3rd-generation facility. If existing 3rd-generation facilities are to remain centers of excellence for light source-based research into the future, they must not only maintain and enhance their support of their existing user base, but also seek to expand their capabilities to support additional classes of users. There are several paths available toward this goal. The APS is

European Union RACE program contributions to digital audiovisual communications and services

Science.gov (United States)

de Albuquerque, Augusto; van Noorden, Leon; Badique', Eric

1995-02-01

The European Union RACE (R&D in advanced communications technologies in Europe) and the future ACTS (advanced communications technologies and services) programs have been contributing and continue to contribute to world-wide developments in audio-visual services. The paper focuses on research progress in: (1) Image data compression. Several methods of image analysis leading to the use of encoders based on improved hybrid DCT-DPCM (MPEG or not), object oriented, hybrid region/waveform or knowledge-based coding methods are discussed. (2) Program production in the aspects of 3D imaging, data acquisition, virtual scene construction, pre-processing and sequence generation. (3) Interoperability and multimedia access systems. The diversity of material available and the introduction of interactive or near- interactive audio-visual services led to the development of prestandards for video-on-demand (VoD) and interworking of multimedia services storage systems and customer premises equipment.

R&D program benefits estimation: DOE Office of Electricity Delivery and Energy Reliability

Energy Technology Data Exchange (ETDEWEB)

None, None

2006-12-04

The overall mission of the U.S. Department of Energy’s Office of Electricity Delivery and Energy Reliability (OE) is to lead national efforts to modernize the electric grid, enhance the security and reliability of the energy infrastructure, and facilitate recovery from disruptions to the energy supply. In support of this mission, OE conducts a portfolio of research and development (R&D) activities to advance technologies to enhance electric power delivery. Multiple benefits are anticipated to result from the deployment of these technologies, including higher quality and more reliable power, energy savings, and lower cost electricity. In addition, OE engages State and local government decision-makers and the private sector to address issues related to the reliability and security of the grid, including responding to national emergencies that affect energy delivery. The OE R&D activities are comprised of four R&D lines: High Temperature Superconductivity (HTS), Visualization and Controls (V&C), Energy Storage and Power Electronics (ES&PE), and Distributed Systems Integration (DSI).

Building monument materials during the 3rd-4rd millennium (Portugal)

Science.gov (United States)

Moita, Patricia; Pedro, Jorge; Boaventura, Rui; Mataloto, Rui; Maximo, Jaime; Almeida, Luís; Nogueira, Pedro

2014-05-01

Dolmens are the most conspicuous remains of the populations of the 4th and first half of 3rd millennia BCE. These tombs are impressive not only for their monumentality, but also because of the socioeconomic investment they represent for those Neolithic communities, namely from the Central-South of Portugal, who built them. Although dolmens have been studied for their funerary content and typologies, an interdisciplinary approach toward the geological characterization and sourcing of stones used in these constructions has not received enough attention from researchers. With MEGAGEO project a multidisciplinary group of geologist and archaeologists intends to assess the relationship between the distribution of dolmens in Central-South Portugal, their source materials, and the geological landscape. GIS will map the information gathered and will be used to analyse these relationships. The selection of the areas, with distinctive geologies (limestone vs granite), will allow to verify if human patterns of behaviour regarding the selection of megaliths are similar or different regionally. Geologically the first target area (Freixo, Alentejo) is dominated by a small intrusion of gabbro mingled/mixed within a granodioritic intrusion both related with variscan orogeny. Granodiorite exhibit several enclaves of igneous and metamorphic nature attesting the interaction between both igneous rocks as well with enclosing gneisses. Despite Alentejo region have a reduced number of outcrops the granodiorite provides rounded to tabular metric blocks. The gabbro is very coarse grained, sometimes with a cumulate texture, and their fracturing and weathering provide very fresh tabular blocks. The five studied dolmens (Quinta do Freixo #1 to #5) are implanted in a large granodioritic intrusion, around the gabbroic rocks, within an area of approximately 9km2. The medium grained granodiorite is ubiquity in all the dolmens slabs and occasionally it can be observed features of mixing and

2D/3D Program work summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The 2D/3D Program was carried out by Germany, Japan and the United States to investigate the thermal-hydraulics of a PWR large-break LOCA. A contributory approach was utilized in which each country contributed significant effort to the program and all three countries shared the research results. Germany constructed and operated the Upper Plenum Test Facility (UPTF), and Japan constructed and operated the Cylindrical Core Test Facility (CCTF) and the Slab Core Test Facility (SCTF). The US contribution consisted of provision of advanced instrumentation to each of the three test facilities, and assessment of the TRAC computer code against the test results. Evaluations of the test results were carried out in all three countries. This report summarizes the 2D/3D Program in terms of the contributing efforts of the participants, and was prepared in a coordination among three countries. US and Germany have published the report as NUREG/IA-0126 and GRS-100, respectively. (author).

2D/3D Program work summary report

International Nuclear Information System (INIS)

1995-09-01

The 2D/3D Program was carried out by Germany, Japan and the United States to investigate the thermal-hydraulics of a PWR large-break LOCA. A contributory approach was utilized in which each country contributed significant effort to the program and all three countries shared the research results. Germany constructed and operated the Upper Plenum Test Facility (UPTF), and Japan constructed and operated the Cylindrical Core Test Facility (CCTF) and the Slab Core Test Facility (SCTF). The US contribution consisted of provision of advanced instrumentation to each of the three test facilities, and assessment of the TRAC computer code against the test results. Evaluations of the test results were carried out in all three countries. This report summarizes the 2D/3D Program in terms of the contributing efforts of the participants, and was prepared in a coordination among three countries. US and Germany have published the report as NUREG/IA-0126 and GRS-100, respectively. (author)

Feasibility Study of Coupling the CASMO-4/TABLES-3/SIMULATE-3 Code System to TRACE/PARCS

International Nuclear Information System (INIS)

Demaziere, Christophe; Staalek, Mathias

2004-12-01

This report investigates the feasibility of coupling the Studsvik Scandpower CASMO-4/TABLES-3/SIMULATE-3 codes to the US NRC TRACE/PARCS codes. The data required by TRACE/PARCS are actually the ones necessary to run its neutronic module PARCS. Such data are the macroscopic nuclear cross-sections, some microscopic nuclear cross-sections important for the Xenon and Samarium poisoning effects, the Assembly Discontinuity Factors, and the kinetic parameters. All these data can be retrieved from the Studsvik Scandpower codes. The data functionalization is explained in detail for both systems of codes and the possibility of coupling each of these codes to TRACE/PARCS is discussed. Due to confidentiality restrictions in the use of the CASMO-4 files and to an improper format of the TABLES-3 output files, it is demonstrated that TRACE/PARCS can only be coupled to SIMULATE-3. Specifically-dedicated SIMULATE-3 input decks allow easily editing the neutronic data at specific operating statepoints. Although the data functionalization is different between both systems of codes, such a procedure permits reconstructing a set of data directly compatible with PARCS

A new release of the S3M code

International Nuclear Information System (INIS)

Pavlovic, M.; Bokor, J.; Regodic, M.; Sagatova, A.

2015-01-01

This paper presents a new release of the code that contains some additional routines and advanced features of displaying the results. Special attention is paid to the processing of the SRIM range file, which was not included in the previous release of the code. Examples of distributions provided by the S 3 M code for implanted ions in thyroid and iron are presented. (authors)

Linear tree codes and the problem of explicit constructions

Czech Academy of Sciences Publication Activity Database

Pudlák, Pavel

2016-01-01

Roč. 490, February 1 (2016), s. 124-144 ISSN 0024-3795 R&D Projects: GA ČR GBP202/12/G061 Institutional support: RVO:67985840 Keywords : tree code * error correcting code * triangular totally nonsingular matrix Subject RIV: BA - General Mathematics Impact factor: 0.973, year: 2016 http://www.sciencedirect.com/science/article/pii/S002437951500645X

83rd Annual Meeting of the Eastern Psychological Association

Directory of Open Access Journals (Sweden)

I A Novikova

2012-06-01

Full Text Available A brief review of the International Program of the 83rd Annual Meeting of the Eastern Psychological Association (EPA that took place on 1-4 March 2012 in Pittsburgh (USA is submitted in the publication.

Motors of Change for R&D and Innovation towards Sustainable Energy in Turkey

Directory of Open Access Journals (Sweden)

Şiir Kılkış

2014-04-01

Full Text Available There is a revival of mission-oriented R&D and innovation programs in prioritized areas that serve the aim of decoupling economic growth from environmental pressures. This paper analyzes the governance process in activating the innovation actors in the area of energy technologies in Turkey. This process that was coordinated by TÜBİTAK led to the National Energy R&D and Innovation Strategy for 2011-2016. The three main phases of this process are mapped to be strategy-building, prioritization, and implementation involving six different participatory approaches. The Strategy is based on the strategic aims of mission-oriented R&D projects, capacity advancement, commercialization, and governance. Two new, call-based grant programs launched with eleven energy calls in the first year are overviewed. These programs were key to activating a phase known as “motors of change” for the innovation system. The second year led to the selection of the topic of “Energy Efficiency” for a pilot technology roadmap process, which involved a separate, multi-actor governance process. The paper concludes with the key role of R&D and innovation in allowing energy to contribute to the sustainable development of Turkey by utilizing energy resources effectively and efficiently.

Export performance and investment in R&D

DEFF Research Database (Denmark)

Smith, Valdemar; Madsen, Erik Strøjer; Dilling-Hansen, Mogens

2002-01-01

This paper analyses the role of R&D in the export behaviour of Danish firms. Export behaviour is defined as the export intensity and the likelihood of a firm being an exporter. In the theoretical part of the paper it is argued that export and being R&D active are endogenous with respect to each...... other, and an empirical model is formulated in order to estimate which factors affect the firm's export. It is argued that besides R&D, firm size, wages and a number of other firm-specific factors controlling for risks are highly important for the export performance. In the empirical part of the paper...... the model is tested on a sample of 3,500 Danish firms. Using a FIML estimation form in order to deal with endogeneity problems between the R&D and export decisions of the firms, the computation clearly verifies the theoretical model put forward. Moreover, R&D is an important factor for being an exporting...

Do R&D Investments Affect Export Performance?

DEFF Research Database (Denmark)

Smith, Valdemar; Madsen, Erik Strøjer; Dilling-Hansen, Mogens

2002-01-01

This paper analyses the role of R&D in the export behaviour of Danish firms. Export behaviour is defined as the export intensity and the likelihood of a firm being an exporter. In the theoretical part of the paper it is argued that export and being R&D active are endogenous with respect to each...... other, and an empirical model is formulated in order to estimate which factors affect the firm's export. It is argued that besides R&D, firm size, wages and a number of other firm-specific factors controlling for risks are highly important for the export performance. In the empirical part of the paper...... the model is tested on a sample of 3,500 Danish firms. Using a FIML estimation form in order to deal with endogeneity problems between the R&D and export decisions of the firms, the computation clearly verifies the theoretical model put forward. Moreover, R&D is an important factor for being an exporting...

Prophyrin identification by 3rd derivative UV/VIS spectroscopy

International Nuclear Information System (INIS)

Freeman, D.H.; Saint Martin, D.C.; Boreham, C.J.

1992-01-01

This patent describes the Soret band wavelength of nickel and vanadyl porphyrins λ Soret, which identifies etic DPEP/di-DPEP, propano and butano structure types. The approach is based upon routine diode array uv/vis spectra taken to their 3rd derivative. an interpolated zero crossing gives λ max within 0.1 nm. Accordingly, reference spectral properties of 27 well characterized metalloporphyrins were determined. When λSoret, λα and λβ and molecular mass data were combined, each of the DPEP and di-DPEP nickel complexes were distinct. In addition, λSoret was able to classify nickel etioporphyrins according to the number of beta hydrogens. To illustrate the many possible applications, two substances were isolated by HPLC from a Messel Shale extract based on known HPLC C18 retentions. Comparison of wavelength and mass between isolated and reference counterparts showed precise agreement. Thus uv/vic spectroscopy helps to classify porphyrin structure, and to facilitate identification by matching to reference data

BOT3P: a mesh generation software package for the transport analysis codes Dort, Tort, Twodant, Threedant and MCNP

International Nuclear Information System (INIS)

Orsi, R.

2003-01-01

Bot3p consists of a set of standard Fortran 77 language programs that gives the users of the deterministic transport codes Dort and Tort some useful diagnostic tools to prepare and check the geometry of their input data files for both Cartesian and cylindrical geometries including graphical display modules. Bot3p produces at the same time the geometrical and material distribution data for the deterministic transport codes Twodant and Threedant and, only in three-dimensional (3D) Cartesian geometry, for the Monte Carlo Transport Code MCNP. This makes it possible to compare directly for the same geometry the effects stemming from the use of different data libraries and solution approaches on transport analysis results. Through the use of Bot3p, radiation transport problems with complex 3D geometrical structures can be modelled easily, as a relatively small amount of engineer-time is required and refinement is achieved by changing few parameters. This tool is useful for solving very large challenging problems. (author)