ENDF/B-V utility programs: description and operating instructions

International Nuclear Information System (INIS)

McLaughlin, K.

1984-03-01

A description and operating instructions are supplied for the following ENDF/B-V Processing Programs: CHECKER, CRECT, STNDRD, FIZCON, PSYCHE, RESEND, INTER, INTEND, SUMRIZ, PLOTEF, LSTFCV, RIGEL. These programs can be obtained on magnetic tape, free of charge, from the IAEA Nuclear Data Section. (author)

Quality assurance program description: Hanford Waste Vitrification Plant, Part 1

International Nuclear Information System (INIS)

1992-01-01

This document describes the Department of Energy's Richland Field Office (DOE-RL) quality assurance (QA) program for the processing of high-level waste as well as the Vitrification Project Quality Assurance Program for the design and construction of the Hanford Waste Vitrification Plant (HWVP). It also identifies and describes the planned activities that constitute the required quality assurance program for the HWVP. This program applies to the broad scope of quality-affecting activities associated with the overall HWVP Facility. Quality-affecting activities include designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, inspecting, testing, maintaining, repairing, and modifying. Also included are the development, qualification, and production of waste forms which may be safely used to dispose of high-level radioactive waste resulting from national defense activities. The HWVP QA program is made up of many constituent programs that are being implemented by the participating organizations. This Quality Assurance program description is intended to outline and define the scope and application of the major programs that make up the HWVP QA program. It provides a means by which the overall program can be managed and directed to achieve its objectives. Subsequent parts of this description will identify the program's objectives, its scope, application, and structure

77 FR 48102 - Closed Captioning and Video Description of Video Programming

Science.gov (United States)

2012-08-13

... Captioning and Video Description of Video Programming AGENCY: Federal Communications Commission. [[Page 48103... show that providing captions on their programming would be economically burdensome. DATES: Effective...) establishing requirements for closed captioning on video programming to ensure access by persons with hearing...

Program MASTERCALC: an interactive computer program for radioanalytical computations. Description and operating instructions

International Nuclear Information System (INIS)

Goode, W.

1980-10-01

MASTERCALC is a computer program written to support radioanalytical computations in the Los Alamos Scientific Laboratory (LASL) Environmental Surveillance Group. Included in the program are routines for gross alpha and beta, 3 H, gross gamma, 90 Sr and alpha spectroscopic determinations. A description of MASTERCALC is presented and its source listing is included. Operating instructions and example computing sessions are given for each type of analysis

Preliminary site description Forsmark area - version 1.1

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-03-01

This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

CANGEO program description and user's instruction

International Nuclear Information System (INIS)

Park, Joo Hwan; Jun, J. S.; Suk, H. C.; Hwang, D. H.; Yoo, Y. J.

1997-10-01

This is a report for the description and user's instruction of CANGEO (CANdu GEOmetry) program. CANGEO program is able to generate the geometry input for thermalhydraulic subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel data for a complicated geometry such as a CANDU fuel channel. And this code can be applicable to a bundle eccentricity from pressure tube center to bundle center, pressure tube creep, rod ballooning, and any symmetric subchannel geometry required by thermalhydraulic subchannel analysis code. The report also describes the basic calculation method of subchannel geometry, including user's manual, input and output for a CANDU fuel channel loaded with 37-element fuel bundle. (author). 35 refs., 6 figs

Description of mathematical models and computer programs

International Nuclear Information System (INIS)

1977-01-01

The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

Simulation model for wind energy storage systems. Volume III. Program descriptions. [SIMWEST CODE

Energy Technology Data Exchange (ETDEWEB)

Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

1977-08-01

The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume III, the SIMWEST program description contains program descriptions, flow charts and program listings for the SIMWEST Model Generation Program, the Simulation program, the File Maintenance program and the Printer Plotter program. Volume III generally would not be required by SIMWEST user.

13 CFR 108.10 - Description of the New Markets Venture Capital Program.

Science.gov (United States)

2010-01-01

... Venture Capital Program. 108.10 Section 108.10 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Introduction to Part 108 § 108.10 Description of the New Markets Venture Capital Program. The New Markets Venture Capital (“NMVC”) Program is a...

Preliminary site description Forsmark area - version 1.1

International Nuclear Information System (INIS)

2004-03-01

This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

GGP Program Description, 2006-2011 | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-22

Dec 22, 2010 ... This document explains the context and orientation of the IDRC's Globalization, Growth and Poverty (GGP) program initiative for the 2006-11 period, detailing the GGP program's objectives, research areas, cross-cutting themes, and programming approach.Download the PDF : Globalization, Growth and ...

ELESTRES.M11K program users'manual and description

International Nuclear Information System (INIS)

Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

1992-12-01

ELESTRES.M11K is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computers the one-dimensional temperature distribution and thermal expansion of the fuel pellets, and computes two-dimensional pellet deformation using FEM. The amount of fission gas released and sheath strain/stress are also computed. This document is intended as a users' manual and description for ELESTRES.M11K program. (Author)

Testing the methodology for site descriptive modelling. Application for the Laxemar area

Energy Technology Data Exchange (ETDEWEB)

Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

2002-08-01

A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

KAFEPA-II program users' manual and description

International Nuclear Information System (INIS)

Suk, H. C.; Hwang, W.; Kim, B. G.; Sim, K. S.; Heo, Y. H.; Byun, T. S.; Park, G. S.

1992-04-01

KAFEPA-II is a computer program for simulating the behaviour of UO 2 fuel elements under normal operating conditions of a CANDU reactor. It computes the one-dimensional temperature distribution and thermal expansion of the fuel pellets. The amount of gas released during irradiation of the fuel is also computed. Thermal expansion and gas pressure inside the fuel element are then used to compute the strains and stresses in the sheath. This document is intended as a user's manual and description for KAFEPA-II. (Author)

The Caltech Concurrent Computation Program - Project description

Science.gov (United States)

Fox, G.; Otto, S.; Lyzenga, G.; Rogstad, D.

1985-01-01

The Caltech Concurrent Computation Program wwhich studies basic issues in computational science is described. The research builds on initial work where novel concurrent hardware, the necessary systems software to use it and twenty significant scientific implementations running on the initial 32, 64, and 128 node hypercube machines have been constructed. A major goal of the program will be to extend this work into new disciplines and more complex algorithms including general packages that decompose arbitrary problems in major application areas. New high-performance concurrent processors with up to 1024-nodes, over a gigabyte of memory and multigigaflop performance are being constructed. The implementations cover a wide range of problems in areas such as high energy and astrophysics, condensed matter, chemical reactions, plasma physics, applied mathematics, geophysics, simulation, CAD for VLSI, graphics and image processing. The products of the research program include the concurrent algorithms, hardware, systems software, and complete program implementations.

US Department of Energy, Richland Operations Office Integrated Safety Management System Program Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System (ISMS) Program Description (PD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This PD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this PD contains some information on contractor processes and procedures which then require RL approval or oversight

Nevada Test Site 2000 Annual Data Report: Groundwater Monitoring Program Area 5 Radioactive Waste Management Site

Energy Technology Data Exchange (ETDEWEB)

Y. E.Townsend

2001-02-01

This report is a compilation of the calendar year 2000 groundwater sampling results from the Area 5 Radioactive Waste Management Site (RWMS). Contamination indicator data are presented in control chart and tabular form with investigation levels (IL) indicated. Gross water chemistry data are presented in graphical and tabular form. Other information in the report includes, the Cumulative Chronology for Area 5 RWMS Groundwater Monitoring Program, a brief description of the site hydrogeology, and the groundwater sampling procedure.

Nevada Test Site 2000 Annual Data Report: Groundwater Monitoring Program Area 5 Radioactive Waste Management Site

International Nuclear Information System (INIS)

Y. E.Townsend

2001-01-01

This report is a compilation of the calendar year 2000 groundwater sampling results from the Area 5 Radioactive Waste Management Site (RWMS). Contamination indicator data are presented in control chart and tabular form with investigation levels (IL) indicated. Gross water chemistry data are presented in graphical and tabular form. Other information in the report includes, the Cumulative Chronology for Area 5 RWMS Groundwater Monitoring Program, a brief description of the site hydrogeology, and the groundwater sampling procedure

A report to Congress Nuclear Regulatory Research: Project descriptions for FY88

International Nuclear Information System (INIS)

1988-08-01

This report has been written in response to a request of the United States Congress that the Nuclear Regulatory Commission prepare and submit to the Congress a summary description of its research projects. Commercial contracts and research efforts at the Department of Energy (DOE) laboratories are assigned a five-digit financial number (FIN). This report provides a project descriptions for each FIN number. The project descriptions are divided into five major sections called program areas. These areas are: integrity of reactor components, prevent damage to reactor cores, reactor containment safety, confirming safety of nuclear waste disposal, and resolving safety issues and developing regulations. An explanation of each program area is given in an overview at the beginning of each section

FURNACE; a toroidal geometry neutronic program system method description and users manual

International Nuclear Information System (INIS)

Verschuur, K.A.

1984-12-01

The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

46 CFR 176.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Hull and Tailshaft Examinations § 176.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an...

Skin tumor area extraction using an improved dynamic programming approach.

Science.gov (United States)

Abbas, Qaisar; Celebi, M E; Fondón García, Irene

2012-05-01

Border (B) description of melanoma and other pigmented skin lesions is one of the most important tasks for the clinical diagnosis of dermoscopy images using the ABCD rule. For an accurate description of the border, there must be an effective skin tumor area extraction (STAE) method. However, this task is complicated due to uneven illumination, artifacts present in the lesions and smooth areas or fuzzy borders of the desired regions. In this paper, a novel STAE algorithm based on improved dynamic programming (IDP) is presented. The STAE technique consists of the following four steps: color space transform, pre-processing, rough tumor area detection and refinement of the segmented area. The procedure is performed in the CIE L(*) a(*) b(*) color space, which is approximately uniform and is therefore related to dermatologist's perception. After pre-processing the skin lesions to reduce artifacts, the DP algorithm is improved by introducing a local cost function, which is based on color and texture weights. The STAE method is tested on a total of 100 dermoscopic images. In order to compare the performance of STAE with other state-of-the-art algorithms, various statistical measures based on dermatologist-drawn borders are utilized as a ground truth. The proposed method outperforms the others with a sensitivity of 96.64%, a specificity of 98.14% and an error probability of 5.23%. The results demonstrate that this STAE method by IDP is an effective solution when compared with other state-of-the-art segmentation techniques. The proposed method can accurately extract tumor borders in dermoscopy images. © 2011 John Wiley & Sons A/S.

Preliminary site description. Simpevarp area - version 1.1

Energy Technology Data Exchange (ETDEWEB)

Winberg, Anders [ed.

2004-08-01

Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

46 CFR 71.50-15 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an alternative to a drydock examination by allowing...

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

The MuCool Test Area and RF Program

International Nuclear Information System (INIS)

Torun, Y.; Huang, D.; Norem, J.; Palmer, Robert B.; Stratakis, Diktys; Bross, A.; Chung, M.; Jansson, A.; Moretti, A.; Yonehara, K.; Li, D.

2010-01-01

The MuCool RF Program focuses on the study of normal conducting RF structures operating in high magnetic field for applications in muon ionization cooling for Neutrino Factories and Muon Colliders. Here we give an overview of the program, which includes a description of the test facility and its capabilities, the current test program, and the status of a cavity that can be rotated in the magnetic field, which allows for a detailed study of the maximum stable operating gradient vs. magnetic field strength and angle.

Description of the thermoelastic/plastic computer program TEPCO. Memorandum report RSI-0040

International Nuclear Information System (INIS)

Pariseau, W.G.

1975-01-01

Presented is a description of the two-dimensional (plane strain, axial symmetry) thermoelastic/plastic computer program TEPCO used by RE/SPEC Inc. in conjunction with an investigation of rock mechanics of underground radioactive waste disposal

Preliminary site description. Simpevarp area - version 1.1

International Nuclear Information System (INIS)

Winberg, Anders

2004-08-01

Site characterisation in the Oskarshamn area is currently conducted at two adjoining localities, the Simpevarp and Laxemar subareas. This report presents the interim version (model version Simpevarp 1.1 of S1.1 for short) of the preliminary Site Descriptive Model for the Simpevarp subarea. The basis for this interim version is quality-assured, geoscientific and ecological field data from the Simpevarp subarea (and in part from the Laxemar area) available in the SKB SICADA and GIS data bases as of July 1, 2003 as well as version 0 of the Site Descriptive Model. The new data collected during the initial site investigation phase up till the date of data freeze S1.1 constitute the basis for the update of version 0 to version S1.1. These data include results from surface investigations in the subarea with its regional environment and from drillings and investigations in boreholes. The surface-based data sets were, in a relative sense, extensive compared with data sets from boreholes, were the information largely was limited to information from one c. 1,000 m deep cored borehole (KSH01A), two existing cored boreholes and three c. 200 m deep percussion-drilled boreholes. Discipline-specific models are developed for the selected regional and local model volumes and these models are subsequently integrated into a unified site description. The current methodologies for developing discipline-specific models and their integration are documented in methodology/ strategy reports. In the present work, the procedures and guidelines given in those reports were followed to the extent possible given the data and information available at the time of data freeze for model version S1.1. Compared with version 0 there are considerable additional features in the version S1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and surface data of much higher

Investigation of administrative obstacles to family physician program in urban areas of Iran

Directory of Open Access Journals (Sweden)

Javad Javan noughabi

2017-06-01

Full Text Available Health is regarded as one of the basic rights of each person in society; so governments are obligated to provide it equally for everyone. The best way to achieve this goal is the establishment of health insurance with the orientation of family physician and the strategic referral system. Yet, such programs will not be successful without encouraging people to participate and changing social behaviors. The aim of the present study was to investigate the administrative obstacles and problems to family physician program in urban areas of Iran. This study was a qualitative research conducted. A purposive sampling method was employed and the data were gathered via semi-structured interview with open-ended questions and document examination. All the interviews were recorded digitally and immediately transcribed verbatim. They were finally analyzed based on framework analysis. The participants' detailed descriptions showed that systemic, environmental, and human related factors were the main obstacles to the implementation of family physician plan. Since the success and performance of each program effectively cannot be obtained without people’s acceptance and collaboration, the necessity of training and giving information rapidly and timely to the residents in urban areas is felt more than ever. Also, making authorities aware of the obstacles expressed by people can be helpful in harmonizing the program with people’s requests; and can result in overcoming the challenges and obstacles facing the program.

N Area Final Project Program Plan

International Nuclear Information System (INIS)

Day, R.S.; Duncan, G.M; Trent, S.J.

1998-07-01

The N Area Final Project Program Plan is issued for information and use by the U.S. Department of Energy (DOE), the Environmental Restoration Contractor (ERC) for the Hanford Site, and other parties that require workscope knowledge for the deactivation of N Reactor facilities and remediation of the 100-N Area. This revision to the program plan contains the updated critical path schedule to deactivate N Reactor and its supporting facilities, cleanout of the N Reactor Fuel Storage Basin (105-N Basin), and remediate the 100-N Area. This document reflects notable changes in the deactivation plan for N Reactor, including changes in deactivation status, the N Basin cleanout task, and 100-N Area remediation

Atmospheric Science Program. Summaries of research in FY 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

This report provides descriptions for all projects funded by ESD under annual contracts in FY 1994. Each description contains the project`s title; three-year funding history (in thousands of dollars); the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date (for most projects older than one year). Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded by a brief text that defines the program area, states it goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used.

Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

International Nuclear Information System (INIS)

Johansson, Per-Olof; Werner, Kent; Bosson, Emma; Berglund, Sten; Juston, John

2005-06-01

The present report is a background report describing the meteorological conditions and the modelling of surface hydrology and near-surface hydrogeology in support of the Forsmark version 1.2 SDM based on the data available in the Forsmark 1.2 ''data freeze'' (July 31, 2004). The area covered in the conceptual and descriptive modelling is characterised by a low relief and a small-scale topography. Almost the whole area is located below 20 m a s l (metres above sea level). The corrected mean annual precipitation is 600-650 mm and the mean annual evapotranspiration can be estimated to a little more than 400 mm, leaving approximately 200 mm x year-1 for runoff. Till is the dominating Quaternary deposit covering approximately 75% of the area. In most of the area, the till is sandy. Bedrock outcrops are frequent but cover only approximately 5% of the area. Direct groundwater recharge from precipitation is the dominant source of groundwater recharge. The small-scale topography implies that many local, shallow groundwater flow systems are formed in the Quaternary deposits, overlaying more large-scale flow systems associated with groundwater flows at greater depths. Groundwater level time series from wells in till and bedrock within the same areas show a considerably higher groundwater level in the till than in the bedrock. The sediment stratigraphy of lakes and wetlands is crucial for their function as discharge areas for groundwater. Comparisons between measured lake water levels and groundwater levels below and around lakes indicate that the lakes in some cases may act as sources of groundwater recharge. Specifically, observations from Lake Bolundsfjaerden and Lake Eckarfjaerden show that such conditions were at hand during the dry summer of 2003. However, whether the observed water level relations correspond to significant water fluxes depends also on the hydrogeological properties of the lake sediments and the underlying Quaternary deposits. ''Old'' water with high

Data Science Programs in U.S. Higher Education: An Exploratory Content Analysis of Program Description, Curriculum Structure, and Course Focus

Science.gov (United States)

Tang, Rong; Sae-Lim, Watinee

2016-01-01

In this study, an exploratory content analysis of 30 randomly selected Data Science (DS) programs from eight disciplines revealed significant gaps in current DS education in the United States. The analysis centers on linguistic patterns of program descriptions, curriculum requirements, and DS course focus as pertaining to key skills and domain…

Energy research program 82

International Nuclear Information System (INIS)

1982-01-01

The energy research program 82 (EFP-82) is prepared by the Danish ministry of energy in order to continue the extension of the Danish energy research and development started through the former trade ministry's programs EM-1 (1976) and EM-2 (1978), and the energy ministry's programs EFP-80 and EFP-81. The new program is a continuation of the activities in the period 1982-84 with a total budget of 100 mio.Dkr. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (BP)

Regional hydrogeological simulations for Forsmark - numerical modelling using CONNECTFLOW. Preliminary site description Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Hartley, Lee; Cox, Ian; Hunter, Fiona; Jackson, Peter; Joyce, Steve; Swift, Ben [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

2005-05-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in-situ conditions for a bedrock repository for spent nuclear fuel. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft). An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model, which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models. Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that affects the Forsmark area. Transport calculations are then performed by particle tracking from a local-scale release area (a few square kilometres) to identify potential discharge areas for the site and using greater grid resolution. The main objective of this study is to support the development of a preliminary Site Description of the Forsmark area on a regional-scale based on the available data of 30 June 2004 and the previous Site Description. A more specific

46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative...

77 FR 59931 - Single Source Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program...

Science.gov (United States)

2012-10-01

... Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program Grantee; Exception to... Competition--Single Source Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program... supplement award to the University of Guam School of Nursing, an Area Health Education Center (AHEC) Program...

A review of pediatric dentistry program websites: what are applicants learning about our programs?

Science.gov (United States)

Lin, Jenn-Yih; Lee, Jung; Davidson, Bo; Farquharson, Kara; Shaul, Cheryl; Kim, Sara

2010-06-01

The purpose of this study was twofold: 1) to examine website content provided by U.S. and Canadian pediatric dentistry residency programs, and 2) to understand aspects of program websites that dental students report to be related to their interests. Sixty-eight program websites were reviewed by five interprofessional evaluators. A thirty-six-item evaluation form was organized into 1) program descriptive items listed on the American Academy of Pediatric Dentistry (AAPD) website (n=21); 2) additional program descriptive items not listed on the AAPD website but of interest (n=9); and 3) items related to website interface design (n=5). We also surveyed fifty-four dental students regarding their interest in various aspects of program descriptions. The results of this study suggest that pediatric dentistry residency programs in general tend to provide identical or less information than what is listed on the AAPD website. The majority of respondents (76 percent) reported that residency program websites would be their first source of information about advanced programs. The greatest gap between the available website information and students' interests exists in these areas: stipend and tuition information, state licensure, and program strengths. Pediatric dentistry residency programs underutilize websites as a marketing and recruitment tool and should incorporate more information in areas of students' priority interests.

Regulatory research and support program for 1993/1994 - project descriptions

International Nuclear Information System (INIS)

1993-01-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year's program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M

Regulatory research and support program for 1993/1994 - project descriptions

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

The Regulatory Research and Support Program (RSP) is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions on regulating nuclear facilities and materials. The program is divided into nine main areas of research (mission objects) covering the safety of nuclear facilities, radioactive waste management, health physics, physical security, the development of regulatory processes, and special services. In addition, for the first time in this year`s program, sub-programs (collections of related projects) have been organized in some areas of study; these sub-programs may cut across several mission objects. More sub-programs will be introduced in future years. A total of 96 projects are planned for 1993/94, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed and provisionally ranked. The spending estimates for the RSP were calculated on the basis of an expected budget of $3.85 M.

BWR Full Integral Simulation Test (FIST) program: facility description report

International Nuclear Information System (INIS)

Stephens, A.G.

1984-09-01

A new boiling water reactor safety test facility (FIST, Full Integral Simulation Test) is described. It will be used to investigate small breaks and operational transients and to tie results from such tests to earlier large-break test results determined in the TLTA. The new facility's full height and prototypical components constitute a major scaling improvement over earlier test facilities. A heated feedwater system, permitting steady-state operation, and a large increase in the number of measurements are other significant improvements. The program background is outlined and program objectives defined. The design basis is presented together with a detailed, complete description of the facility and measurements to be made. An extensive component scaling analysis and prediction of performance are presented

SCIENTIFIC KNOWLEDGE ISSUED IN BRAZIL AT POST GRADUATE PROGRAMS IN TOURISM AND CORRELATED AREAS FROM 2000 TO 2006

Directory of Open Access Journals (Sweden)

Christiane Fabíola Momm

2010-11-01

Full Text Available A research on scientific knowledge issued in Brazil at post graduate programs in Tourism and correlated areas was conducted taking in account bibliographical references contained in Master Thesis presented in four Post Graduate Programs from 2000 to 2006. It was an exploratory, descriptive, qualitative study using bibliometric a scientometric tools and techniques. 334 bibliographical references were organized and classified following the Spanish Documental Center of Spain Tourism Thesaurus patterns. As a result 15 research lines were identified. As for scientific knowledge itself, a great diversity of research lines and issues were identified. The study demonstrates the hierarchical relation between generic terms and specific terms and points which knowledge areas have a dialogue with the field. Final considerations suggest reflection on scientific development in Tourism in Brazil is needed.

Ecosystem description of a drainage area - a strategy in biosphere descriptions during site investigations for a repository of spent nuclear fuel

International Nuclear Information System (INIS)

Lindborg, T.; Lofgren, A.

2004-01-01

During the next few years the Swedish Nuclear Fuel and Waste Management Co. (SKB) performs site investigations at two sites in Sweden for a future repository of spent nuclear fuel. Novel methods based on systems and landscape ecology are developed to understand and model the radionuclide flow in the biosphere using site specific data for a safety assessment. This work describes the strategy for development of a descriptive ecosystem model for the surface ecosystem. The site description is needed to: a) perform a safety assessment that describes and analyzes different scenarios for radionuclide releases into the ecosystem and possible pathways for dispersal or accumulation radionuclides in the ecosystem, b) detect changes caused by the construction of a repository, c) establish a baseline for detecting long-term effects of the repository. The description adopts a site-specific approach focusing on the quantification of the properties that will constitute the descriptive model. The aim is also to present the methodology for determining the properties, to describe the development of the framework for the descriptive ecosystem models by integrating use of different properties, and finally, to present vital data from other site descriptive models such as those for geology or hydrogeology. The safety assessment will use an approach, among other methods, where transport and accumulation of radionuclides will be modelled by quantifying biogeochemical pathways of matter. The descriptive ecosystem model applied to the site was therefore built to describe and quantify processes affecting i.e. turnover of matter in a drainage area. The conclusions from applying this approach was that by have estimating the flow of matter the ecological and physical constrains on the system reduces the potential variations in outcome of future states of the ecosystem and thus also reduces the uncertainties in estimating radionuclide flow and consequences to humans and the environment. (author)

Description and comparison of pharmacy technician training programs in the United States.

Science.gov (United States)

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Energy research program 84

International Nuclear Information System (INIS)

1984-01-01

The energy research program 84 (EFP-84) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82 and EFP-83. The new program is a continuation of the activities in the period 1984-86 with a total budget of 112 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Energy research program 83

International Nuclear Information System (INIS)

1983-01-01

The energy research program 83 (EFP-83) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81 and EFP-82. The new program is a continuation of the activities in the period 1983-85 with a total budget of 111 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Energy research program 85

International Nuclear Information System (INIS)

1985-01-01

The energy research program 85 (EFP-85) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, and EFP-84. The new program is a continuation of the activities in the period 1985-87 with a total budget of 110 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

The Impact Implementation Program of Corporate Social Responsibity of PT. Kuansing Inti Makmur Toward Society Development Around Mining Area

Directory of Open Access Journals (Sweden)

Marisa Oktavia

2018-03-01

Full Text Available This study aims to determine the impact implementation of corporate social responsibility (CSR program PT. Kuansing Inti Makmur (PT KIM towards the development of communities around the tambanag area and impact of the program. The company's mission is to build sustainable growth through high standards of occupational safety, development of good community programs and robust environmental management. Corporate social responsibility has become one of the most important issues facing the mining industry. Every mining activity is required to develop and empower the communities surrounding the mining area. This is stated in Permen ESDM No 41 of 2016. Techniques in determining informants are taken by purposive sampling, the community development program consists of four areas: education, health, economics and infrastructure. Data processing research using descriptive qualitative analysis. Based on the results of research can be concluded that the impact implementation of CSR programs on community development in the education is felt by the community is enough to help with the percentage of 60%, the health field is felt by the public is enough to help with the percentage of 60%, the perceived the community's economy has less impact on economic improvement with 51% percentage, infrastructure perceived the community is very helpful with 80% percentage.

Knowledge Worker Perceptions of Telework Policy in the New York Metropolitan Area: A Qualitative Descriptive Study

Science.gov (United States)

Slaughter, Sandra Lorraine Hawks

2013-01-01

This qualitative descriptive case study, "Knowledge Worker Perceptions of Telework in the New York Metropolitan Area," was conducted to explore the perceptions of knowledge workers who commute to a physical workplace in the New York Metropolitan area (NYMA). In-depth interviews were conducted with fourteen NYMA commuters who are…

Atmospheric Sciences Program summaries of research in FY 1993

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This document describes the activities and products of the Atmospheric Science Program of the Environmental Sciences Division, Office of Health and Environmental Research, Office of Energy Research, in FY 1993. Each description contains the project`s title; three-year funding history; the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date. Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded by a brief text that defines the program area, states its goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used. This document has been indexed to aid the reader in locating research topics, participants, and research institutions in the text and the project descriptions. Comprehensive subject, principal investigator, and institution indexes are provided at the end of the text for this purpose. The comprehensive subject index includes keywords from the introduction and chapter texts in addition to those from the project descriptions.

Technical Basis Document for PFP Area Monitoring Dosimetry Program

CERN Document Server

Cooper, J R

2000-01-01

This document describes the phantom dosimetry used for the PFP Area Monitoring program and establishes the basis for the Plutonium Finishing Plant's (PFP) area monitoring dosimetry program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), part 835, ''Occupational Radiation Protection'' Part 835.403; Hanford Site Radiological Control Manual (HSRCM-1), Part 514; HNF-PRO-382, Area Dosimetry Program; and PNL-MA-842, Hanford External Dosimetry Technical Basis Manual.

Technical Basis Document for PFP Area Monitoring Dosimetry Program

International Nuclear Information System (INIS)

COOPER, J.R.

2000-01-01

This document describes the phantom dosimetry used for the PFP Area Monitoring program and establishes the basis for the Plutonium Finishing Plant's (PFP) area monitoring dosimetry program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), part 835, ''Occupational Radiation Protection'' Part 835.403; Hanford Site Radiological Control Manual (HSRCM-1), Part 514; HNF-PRO-382, Area Dosimetry Program; and PNL-MA-842, Hanford External Dosimetry Technical Basis Manual

Repository for spent nuclear fuel. Preliminary construction description - layout D Oskarshamn the Simpevarp area

International Nuclear Information System (INIS)

2006-02-01

This report presents the preliminary design of a repository located in the Simpevarp area. The description has been disposed so as to deal primarily with the site dependent layouts for the above- and underground constructions. The report is disposed as follows: c1 gives the background and some basic information. Chapter 2 presents the demands and necessary conditions that take precedence when adapting the plant to the local conditions, construction, operation and closure. Chapter 3 is a general description of the area, its infrastructure and the specific sites that have been studied. Chapter 4-5 describe the design of the plant for the two chosen sites. Chapter 6 gives a review of data for the plant, and Chapter 7 'References' is the last part of the main document. The appendices A-I give brief information on the general, non-site specific, parts of the plant, e.g. buildings, life cycle, system, operation and organization

Repository for spent nuclear fuel. Preliminary construction description - layout D Oskarshamn the Laxemar area

International Nuclear Information System (INIS)

2006-05-01

This report presents the preliminary design of a repository located in the Laxemar area. The description has been disposed so as to deal primarily with the site dependent layouts for the above- and underground constructions. The report is disposed as follows: Chapter 1 gives the background and some basic information. Chapter 2 presents the demands and necessary conditions that take precedence when adapting the plant to the local conditions, construction, operation and closure. Chapter 3 is a general description of the area, its infrastructure and the specific sites that have been studied. Chapters 4-5 describe the design of the plant for the two chosen sites. Chapter 6 gives a review of data for the plant, and Chapter 7 'References' is the last part of the main document. The appendices A-I give brief information on the general, non-site specific, parts of the plant, e.g. buildings, life cycle, system, operation and organization

GetData Digitizing Program Code: Description, Testing, Training

International Nuclear Information System (INIS)

Taova, S.

2013-01-01

90 percents of compilation in our center is obtained by data digitizing. So we are rather interested in the development of different techniques of data digitizing. Plots containing a great amount of points and solid lines are most complicated for digitizing. From our point of view including to the Exfor-Digitizer procedures of automatic or semi-automatic digitizing will allow to simplify significantly this process. We managed to test some free available program codes. Program GETDATA Graph Digitizer (www.getdata- graph-digitizer.com) looks more suitable for our purposes. GetData Graph Digitizer is a program for digitizing graphs, plots and maps. Main features of GetData Graph Digitizer are: - supported graphics formats are TIFF, JPEG, BMP and PCX; - two algorithms for automatic digitizing; - convenient manual digitizing; - reorder tool for easy points reordering; - save/open workspace, which allows to save the work and return to it later; - obtained data can be exported to the clipboard; - export to the formats: TXT (text file), XLS (MS Excel), XML, DXF (AutoCAD) and EPS (PostScript). GetData Graph Digitizer includes two algorithms for automatic digitizing. Auto trace lines: This method is designed to digitize solid lines. Choose the starting point, and the program will trace the line, stopping at it's end. To trace the line use Operations =>Auto trace lines menu or context menu ('Auto trace lines' item). To choose starting point click left mouse button, or click right mouse button to additionally choose direction for line tracing. Digitize area: The second way is to set digitizing area. This method works for any type of lines, including dashed lines. Data points are set at the intersection of grid with the line. You can choose the type of grid (X grid or Y grid), and set the distance between grid lines. You can also make the grid be shifted in such a way, that it will pass through a specific X (or Y) value. To digitize area use Operations →Digitize area menu

Energy research program 86

International Nuclear Information System (INIS)

1986-01-01

The energy research program 86 (EFP-86) is prepared by the Danish Ministry of Energy in order to continue the extension of the Danish energy research and development started through the former Trade Ministry's programs EM-1 (1976) and EM-2 (1978), and the Ministry of Energy's programs EFP-80, EFP-81, EFP-82, EFP-83, EFP-84, and EFP-85. The new program is a continuation of the activities in the period 1986-88 with a total budget of 116 mio. DKK. The program gives a brief description of background, principles, organization and financing, and a detailed description of each research area. (ln)

Technical Basis Document for PFP Area Monitoring Dosimetry Program

Energy Technology Data Exchange (ETDEWEB)

COOPER, J.R.

2000-04-17

This document describes the phantom dosimetry used for the PFP Area Monitoring program and establishes the basis for the Plutonium Finishing Plant's (PFP) area monitoring dosimetry program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), part 835, ''Occupational Radiation Protection'' Part 835.403; Hanford Site Radiological Control Manual (HSRCM-1), Part 514; HNF-PRO-382, Area Dosimetry Program; and PNL-MA-842, Hanford External Dosimetry Technical Basis Manual.

'Only systems thinking can improve family planning program in Pakistan': A descriptive qualitative study.

Science.gov (United States)

Zafar, Saira; Shaikh, Babar Tasneem

2014-12-01

Family Planning (FP) program in Pakistan has been struggling to achieve the desired indicators. Despite a well-timed initiation of the program in late 50s, fertility decline has been sparingly slow. As a result, rapid population growth is impeding economic development in the country. A high population growth rate, the current fertility rate, a stagnant contraceptive prevalence rate and high unmet need remain challenging targets for population policies and FP programs. To accelerate the pace of FP programs and targets concerned, it is imperative to develop and adopt a holistic approach and strategy for plugging the gaps in various components of the health system: service delivery, information systems, drugs-supplies, technology and logistics, Human Resources (HRs), financing, and governance. Hence, World Health Organization (WHO) health systems building blocks present a practical framework for overall health system strengthening. This descriptive qualitative study, through 23 in-depth interviews, explored the factors related to the health system, and those responsible for a disappointing FP program in Pakistan. Provincial representatives from Population Welfare and Health departments, donor agencies and non-governmental organizations involved with FP programs were included in the study to document the perspective of all stakeholders. Content analysis was done manually to generate nodes, sub-nodes and themes. Performance of FP programs is not satisfactory as shown by the indicators, and these programs have not been able to deliver the desired outcomes. Interviewees agreed that inadequate prioritization given to the FP program by successive governments has led to this situation. There are issues with all health system areas, including governance, strategies, funding, financial management, service delivery systems, HRs, technology and logistic systems, and Management Information System (MIS); these have encumbered the pace of success of the program. All stakeholders

Regional hydrogeological simulations. Numerical modelling using ConnectFlow. Preliminary site description Simpevarp sub area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Hartley, Lee; Hoch, Andrew; Hunter, Fiona; Jackson, Peter [Serco Assurance, Risley (United Kingdom); Marsic, Niko [Kemakta Konsult, Stockholm (Sweden)

2005-02-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in situ conditions for a bedrock repository for spent nuclear fuel. The two candidate areas are named Forsmark and Simpevarp. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft).An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models.Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that effects the Simpevarp area. Transport calculations are then performed by particle tracking from a local-scale release area (tens of square kilometres) to identify potential discharge areas for the site. The transport from the two site-scale release areas (a few square kilometres) at the Simpevarp site and the Laxemar site are also considered more specifically and using greater grid resolution.The main

Fusion Energy Sciences Program at LANL

Energy Technology Data Exchange (ETDEWEB)

Leeper, Ramon J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-15

This presentation provides a strategic plan and description of investment areas; LANL vision for existing programs; FES portfolio and other specifics related to the Fusion Energy Sciences program at LANL.

Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

Science.gov (United States)

Lennington, R. K.; Rassbach, M. E.

1979-01-01

Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

Does Physical Activity Mediate the Associations Between Local-Area Descriptive Norms, Built Environment Walkability, and Glycosylated Hemoglobin?

Science.gov (United States)

Carroll, Suzanne J; Niyonsenga, Theo; Coffee, Neil T; Taylor, Anne W; Daniel, Mark

2017-08-23

Associations between local-area residential features and glycosylated hemoglobin (HbA 1c ) may be mediated by individual-level health behaviors. Such indirect effects have rarely been tested. This study assessed whether individual-level self-reported physical activity mediated the influence of local-area descriptive norms and objectively expressed walkability on 10-year change in HbA 1c . HbA 1c was assessed three times for adults in a 10-year population-based biomedical cohort ( n = 4056). Local-area norms specific to each participant were calculated, aggregating responses from a separate statewide surveillance survey for 1600 m road-network buffers centered on participant addresses (local prevalence of overweight/obesity (body mass index ≥25 kg/m²) and physical inactivity (Walkability was directly and indirectly protective of worsening HbA 1c . Local-area descriptive norms and walkability influence cardiometabolic risk trajectory through individual-level physical activity. Efforts to reduce population cardiometabolic risk should consider the extent of local-area unhealthful behavioral norms and walkability in tailoring strategies to improve physical activity.

Plutonium immobilization project development and testing quality assurance program description - February 1999

International Nuclear Information System (INIS)

MacLean, L. M.; Ziemba, J.

1999-01-01

Lawrence Livermore National Laboratory Immobilization Development and Testing organization (LLNL ID and T) is a Participant in the Plutonium Immobilization Project (PIP). The LLNL D and T has lead responsibilities for form characterization and qualification, ceramic form development, process/equipment development with plutonium, and process systems testing and validation for both conversion and immobilization. This work must be performed in accordance with the graded approach of a Quality Assurance (QA) Program. A QA Program has been developed at LLNL to meet the requirements of the DOE/MD Quality Assurance Requirements. The LLNL QA Program consists of a Quality Assurance Program Description (QAPD) and Quality Implementing Procedures. These documents interface and are a subset of the overall PIP QA Program Documents. The PIP QA Program is described in the PIP ID and T QA Plan, PIP QAPD, and QA Procedures. Other Participant Organizations also must document and describe their PIP compliant QA Programs in a QAPD and implementing procedures. The purpose of this LLNL QAPD is to describe the organization, management processes, QA Controls for Grading, functional responsibilities, levels of authority, and interfaces for those managing, performing, and assessing the adequacy of work

Oil program implementation plan FY 1996--2000

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This document reaffirms the US Department of Energy (DOE) Office of Fossil Energy commitment to implement the National Oil Research Program in a way to maximize assurance of energy security, economic growth, environmental protection, jobs, improved economic competitiveness, and improved US balance of trade. There are two sections and an appendix in this document. Section 1 is background information that guided its formulation and a summary of the Oil Program Implementation Plan. This summary includes mission statements, major program drivers, oil issues and trends, budget issues, customers/stakeholders, technology transfer, measures of program effectiveness, and benefits. Section 2 contains more detailed program descriptions for the eight technical areas and the NIPER infrastructure. The eight technical areas are reservoir characterization; extraction research; exploration, drilling, and risk-based decision management; analysis and planning; technology transfer; field demonstration projects; oil downstream operations; and environmental research. Each description contains an overview of the program, descriptions on main areas, a discussion of stakeholders, impacts, planned budget projections, projected schedules with Gantt charts, and measures of effectiveness. The appendix is a summary of comments from industry on an earlier draft of the plan. Although changes were made in response to the comments, many of the suggestions will be used as guidance for the FY 1997--2001 plan.

Quality assurance requirements and description for the Civilian Radioactive Waste Management Program

International Nuclear Information System (INIS)

1992-01-01

The Quality Assurance Requirements and Description (QARD) is the principal quality assurance document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the Quality Assurance Program. The QARD contains regulatory requirements and program commitments necessary for the development of an effective quality assurance program. Quality assurance implementing documents must be based on, and consistent with, QARD requirements. The QARD applies to the following: (1) acceptance of spent nuclear fuel and high-level radioactive waste; (2) transport of spent nuclear fuel and high-level radioactive waste; (3) the Monitored Retrievable Storage (MRS) facility through application for an operating license; (4) Mined Geologic Disposal System (MGDS), including the site characterization activities (exploratory studies facility (ESF) and surface based testing), through application for an operating license; (5) the high-level-waste form from production through acceptance. Section 2.0 defines in greater detail criteria for determining work subject to QARD requirements. The QARD is organized into sections, supplements, appendices, and a glossary. The sections contain requirements that are common to all Program elements. The supplements contain requirements for specialized activities. The appendices contain requirements that are specific to an individual Program element. The glossary establishes a common vocabulary for the Quality Assurance Program

Development of a Standardized Job Description for Healthcare Managers of Metabolic Syndrome Management Programs in Korean Community Health Centers

Directory of Open Access Journals (Sweden)

Youngjin Lee, RN, PhD

2014-03-01

Conclusion: A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs.

International Nuclear Model. Volume 3. Program description

International Nuclear Information System (INIS)

Andress, D.

1985-01-01

This is Volume 3 of three volumes of documentation of the International Nuclear Model (INM). This volume presents the Program Description of the International Nuclear Model, which was developed for the Nuclear and Alternate Fuels Division (NAFD), Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decision based on an input set of technical economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. Companion volumes to Volume 3 are: Volume 1 - Model Overview, and Volume 2 - Data Base Relationships

Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Johansson, Per-Olof [Artesia Grundvattenkonsult AB, Stockholm (Sweden); Werner, Kent [SWECO VIAK AB/Golder Associates AB, Stockholm (Sweden); Bosson, Emma; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Juston, John [DBE Sweden, Uppsala (Sweden)

2005-06-15

The Swedish Nuclear Fuel and Waste Management Company (SKB) is conducting site investigations at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The results from the investigations at the sites are used as a basic input to the development of Site Descriptive Models (SDM). The SDM shall summarise the current state of knowledge of the site, and provide parameters and models to be used in further analyses within Safety Assessment, Repository Design and Environmental Impact Assessment. The present report is a background report describing the meteorological conditions and the modelling of surface hydrology and near-surface hydrogeology in support of the Forsmark version 1.2 SDM based on the data available in the Forsmark 1.2 'data freeze' (July 31, 2004). The groundwater is very shallow, with groundwater levels within one meter below ground as an annual mean for almost all groundwater monitoring wells. Also, the annual groundwater level amplitude is less than 1.5 m for most wells. The shallow groundwater levels mean that there is a strong interaction between evapotranspiration, soil moisture and groundwater. In the modelling, surface water and near-surface groundwater divides are assumed to coincide. The small-scale topography implies that many local, shallow groundwater flow systems are formed in the Quaternary deposits, overlaying more large-scale flow systems associated with groundwater flows at greater depths. Groundwater level time series from wells in till and bedrock within the same areas show a considerably higher groundwater level in the till than in the bedrock. The observed differences in levels are not fully consistent with the good hydraulic contact between overburden and bedrock indicated by the hydraulic tests in the Quaternary deposits. However, the relatively lower groundwater levels in the bedrock may be caused by the horizontal to sub-horizontal highly

Description of CORSET: a computer program for quantitative x-ray fluorescence analysis

International Nuclear Information System (INIS)

Stohl, F.V.

1980-08-01

Quantitative x-ray fluorescence analysis requires a method of correcting for absorption and secondary fluorescence effects due to the sample matrix. The computer program CORSET carries out these corrections without requiring a knowledge of the spectral distribution of the x-ray source, and only requires one standard per element or one standard containing all the elements. Sandia's version of CORSET has been divided into three separate programs to fit Sandia's specific requirements for on-line analysis in a melt facility. The melt facility is used to fabricate new alloys with very variable compositions and requires very rapid analyses during a run. Therefore, the standards must be analyzed several days in advance. Program DAT1 is used to set up a permanent file consisting of all the data related to the standards. Program UNINT is used to set up a permanent file with the intensities, background counts and counting times of the unknowns. Program CORSET uses the files created in UNINT and DAT1 to carry out the analysis. This report contains descriptions, listings, and sample runs for these programs. The accuracy of the analyses carried out with these three programs is about 1 to 2% relative with an elemental concentration of about 10 wt %

‘Only Systems Thinking Can Improve Family Planning Program in Pakistan’: A Descriptive Qualitative Study

Directory of Open Access Journals (Sweden)

Saira Zafar

2014-12-01

Full Text Available Background Family Planning (FP program in Pakistan has been struggling to achieve the desired indicators. Despite a well-timed initiation of the program in late 50s, fertility decline has been sparingly slow. As a result, rapid population growth is impeding economic development in the country. A high population growth rate, the current fertility rate, a stagnant contraceptive prevalence rate and high unmet need remain challenging targets for population policies and FP programs. To accelerate the pace of FP programs and targets concerned, it is imperative to develop and adopt a holistic approach and strategy for plugging the gaps in various components of the health system: service delivery, information systems, drugs-supplies, technology and logistics, Human Resources (HRs, financing, and governance. Hence, World Health Organization (WHO health systems building blocks present a practical framework for overall health system strengthening. Methods This descriptive qualitative study, through 23 in-depth interviews, explored the factors related to the health system, and those responsible for a disappointing FP program in Pakistan. Provincial representatives from Population Welfare and Health departments, donor agencies and non-governmental organizations involved with FP programs were included in the study to document the perspective of all stakeholders. Content analysis was done manually to generate nodes, sub-nodes and themes. Results Performance of FP programs is not satisfactory as shown by the indicators, and these programs have not been able to deliver the desired outcomes. Interviewees agreed that inadequate prioritization given to the FP program by successive governments has led to this situation. There are issues with all health system areas, including governance, strategies, funding, financial management, service delivery systems, HRs, technology and logistic systems, and Management Information System (MIS; these have encumbered the pace of

Data analysis of the 1984 and 1986 soil sampling programs at Materials Disposal Area T in the Los Alamos National Laboratory

International Nuclear Information System (INIS)

Nyhan, J.W.; Drennon, B.J.

1993-09-01

An environmental surveillance program for Materials Disposal Area T (MDA-T) at Los Alamos, New Mexico is described. The waste-use history of this disposal site is described, followed by a description of the materials and methods used to analyze data from two surface soil radionuclide sampling programs performed at this disposal site. The disposal site's physical features are related to the spatial distribution of radionuclide concentration contours in an attempt to evaluate radionuclide migration mechanisms in and around the site. The usefulness of the data analysis efforts is evaluated and recommendations are made for future studies

Real-Time Engagement Area Development Program (READ-Pro)

National Research Council Canada - National Science Library

Burger, Joseph

2002-01-01

The Real Time Engagement Area Development Program (READ-Pro) is a PC-based prototype system which provides company-level commanders with real-time operational analysis tools to develop ENGAGEMENT AREAS(EA) for direct fire (DF) systems...

Real-Time Engagement Area Development Program (Read-Pro)

National Research Council Canada - National Science Library

Burger, Joseph

2002-01-01

The Real-Tine Engagement Area Development Program (READ-Pro) is a PC-based prototype system which provides company-level commanders with real-time operational analysis tools to develop engagement areas (RA) for direct fire (DR) systems...

Area Safety Program for the tokamak fusion test reactor (TFTR)

International Nuclear Information System (INIS)

Rappe, G.M.

1984-10-01

Overall the Area Safety Program has proved to be a very successful operation. There is no doubt that a safety program organized through line management is the best way to involve all personnel. Naturally, when the program was first started, there was some criticism and a certain resistance on the part of a few individuals to fully participate. However, once the program was underway and it could be seen that it was working to everyone's advantage, this reluctance disappeared and a spirit of full cooperation is now enjoyed. It is very important that for this success to continue there must be a two way flow of information, both from the Area Safety Coordinators up through line management, and from senior management, with decisions and answers, back down through the management chain with the utmost dispatch. As with all programs, there is still room for improvement. This program has started a review cycle with a view to streamlining certain areas and possibly increasing its scope in others

A Descriptive Analysis of the Use of Twitter by Emergency Medicine Residency Programs.

Science.gov (United States)

Diller, David; Yarris, Lalena M

2018-02-01

Twitter is increasingly recognized as an instructional tool by the emergency medicine (EM) community. In 2012, the Council of Residency Directors in Emergency Medicine (CORD) recommended that EM residency programs' Twitter accounts be managed solely by faculty. To date, little has been published regarding the patterns of Twitter use by EM residency programs. We analyzed current patterns in Twitter use among EM residency programs with accounts and assessed conformance with CORD recommendations. In this mixed methods study, a 6-question, anonymous survey was distributed via e-mail using SurveyMonkey. In addition, a Twitter-based search was conducted, and the public profiles of EM residency programs' Twitter accounts were analyzed. We calculated descriptive statistics and performed a qualitative analysis on the data. Of 168 Accreditation Council for Graduate Medical Education-accredited EM programs, 88 programs (52%) responded. Of those programs, 58% (51 of 88) reported having a program-level Twitter account. Residents served as content managers for those accounts in the majority of survey respondents (61%, 28 of 46). Most programs did not publicly disclose the identity or position of their Twitter content manager. We found a wide variety of applications for Twitter, with EM programs most frequently using Twitter for educational and promotional purposes. There is significant variability in the numbers of followers for EM programs' Twitter accounts. Applications and usage among EM residency programs are varied, and are frequently not consistent with current CORD recommendations.

Development of a standardized job description for healthcare managers of metabolic syndrome management programs in Korean community health centers.

Science.gov (United States)

Lee, Youngjin; Choo, Jina; Cho, Jeonghyun; Kim, So-Nam; Lee, Hye-Eun; Yoon, Seok-Jun; Seomun, GyeongAe

2014-03-01

This study aimed to develop a job description for healthcare managers of metabolic syndrome management programs using task analysis. Exploratory research was performed by using the Developing a Curriculum method, the Intervention Wheel model, and focus group discussions. Subsequently, we conducted a survey of 215 healthcare workers from 25 community health centers to verify that the job description we created was accurate. We defined the role of healthcare managers. Next, we elucidated the tasks of healthcare managers and performed needs analysis to examine the frequency, importance, and difficulty of each of their duties. Finally, we verified that our job description was accurate. Based on the 8 duties, 30 tasks, and 44 task elements assigned to healthcare managers, we found that the healthcare managers functioned both as team coordinators responsible for providing multidisciplinary health services and nurse specialists providing health promotion services. In terms of importance and difficulty of tasks performed by the healthcare managers, which were measured using a determinant coefficient, the highest-ranked task was planning social marketing (15.4), while the lowest-ranked task was managing human resources (9.9). A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs. Copyright © 2014. Published by Elsevier B.V.

Algebraic computability and enumeration models recursion theory and descriptive complexity

CERN Document Server

Nourani, Cyrus F

2016-01-01

This book, Algebraic Computability and Enumeration Models: Recursion Theory and Descriptive Complexity, presents new techniques with functorial models to address important areas on pure mathematics and computability theory from the algebraic viewpoint. The reader is first introduced to categories and functorial models, with Kleene algebra examples for languages. Functorial models for Peano arithmetic are described toward important computational complexity areas on a Hilbert program, leading to computability with initial models. Infinite language categories are also introduced to explain descriptive complexity with recursive computability with admissible sets and urelements. Algebraic and categorical realizability is staged on several levels, addressing new computability questions with omitting types realizably. Further applications to computing with ultrafilters on sets and Turing degree computability are examined. Functorial models computability is presented with algebraic trees realizing intuitionistic type...

Computer automation of continuous-flow analyzers for trace constituents in water. Volume 4. Description of program segments. Part 3. TAASTART

International Nuclear Information System (INIS)

Crawford, R.W.

1979-01-01

This report describes TAASTART, the third program in the series of programs necessary in automating the Technicon AutoAnalyzer. Included is a flow chart that illustrates the program logic and a description of each section and subroutine. In addition, all arrays, variables and strings are listed and defined, and a sample program listing with a complete list of symbols and references is provided

78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

Science.gov (United States)

2013-07-05

... description services for television are provided on a secondary audio stream, and typically a consumer can... box. The Commission recently adopted rules requiring apparatus that is designed to receive, play back, or record video programming transmitted simultaneously with sound to make secondary audio streams...

The AutoBayes Program Synthesis System: System Description

Science.gov (United States)

Fischer, Bernd; Pressburger, Thomas; Rosu, Grigore; Schumann, Johann; Norvog, Peter (Technical Monitor)

2001-01-01

AUTOBAYES is a fully automatic program synthesis system for the statistical data analysis domain. Its input is a concise description of a data analysis problem in the form of a statistical model; its output is optimized and fully documented C/C++ code which can be linked dynamically into the Matlab and Octave environments. AUTOBAYES synthesizes code by a schema-guided deductive process. Schemas (i.e., code templates with associated semantic constraints) are applied to the original problem and recursively to emerging subproblems. AUTOBAYES complements this approach by symbolic computation to derive closed-form solutions whenever possible. In this paper, we concentrate on the interaction between the symbolic computations and the deductive synthesis process. A statistical model specifies for each problem variable (i.e., data or parameter) its properties and dependencies in the form of a probability distribution, A typical data analysis task is to estimate the best possible parameter values from the given observations or measurements. The following example models normal-distributed data but takes prior information (e.g., from previous experiments) on the data's mean value and variance into account.

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

OpenAIRE

Colantonio, A.

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subj...

Land reclamation program description

Energy Technology Data Exchange (ETDEWEB)

None

1977-05-01

The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

Caolines Program. N1 area prospective soundings

International Nuclear Information System (INIS)

Coronel, N.; Mari, C.

1984-01-01

This work is about The Caolines program. After several stages was designed a network of drilling to be developed in prospective areas. The support of this network was a geological cartography performed in a devonian region.

Employee assistance programs: history and program description.

Science.gov (United States)

Gilbert, B

1994-10-01

1. The history and development of Employee Assistance Programs (EAPs) can be traced back to the 1800s. There are currently over 10,000 EAPs in the United States. 2. Standards for program accreditation and counselor certification have been established for EAPs. The "core technology of Employee Assistance Programs" includes identification of behavioural problems based on job performance issues, expert consultation with supervisors, appropriate use of constructive confrontation, microlinkages with treatment providers and resources, macrolinkages between providers, resources, and work organizations, focus on substance abuse, and evaluation of employee success based on job performance. 3. Some EAPs take a broad brush approach, and incorporate health promotion and managed care functions.

Firebird-III program description

International Nuclear Information System (INIS)

Lin, M.R.; Prawirosochardjo, S.; Rennick, D.F.; Wessman, E.; Blain, R.J.D.; Wilson, J.M.

1979-09-01

The FIREBIRD-III digital computer program is a general network code developed primarily for predicting the thermalhydraulic behaviour of CANDU power reactors during a postulated loss-of-coolant accident and the subsequent emergency coolant injection. Because of its flexibility, the code can also be used to solve a large variety of general two-phase flow problems. This report describes the thermalhydraulic models and the computation methods used in the program

Partial Support of MAST Academy Outreach Program

Science.gov (United States)

1993-05-25

Another very positive aspect of the student-mentor relationship occured when young women served their internship with a woman scientist or the... siences has indirectly led to the initiation of similar programs in other academic areas. APPENDIX A JOB DESCRIPTIONS FOR MAST ACADEMY OUTREACH PROGRAM

HIGHWAY, a transportation routing model: program description and users' manual

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.; Gibson, S.M.

1982-12-01

A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire interstate highway system, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of interstate highways or routes that will bypass urbanized areas containing populations > 100,000. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

Application of fractal theory in refined reservoir description for EOR pilot area

Energy Technology Data Exchange (ETDEWEB)

Yue Li; Yonggang Duan; Yun Li; Yuan Lu

1997-08-01

A reliable reservoir description is essential to investigate scenarios for successful EOR pilot test. Reservoir characterization includes formation composition, permeability, porosity, reservoir fluids and other petrophysical parameters. In this study, various new tools have been applied to characterize Kilamayi conglomerate formation. This paper examines the merits of various statistical methods for recognizing rock property correlation in vertical columns and gives out methods to determine fractal dimension including R/S analysis and power spectral analysis. The paper also demonstrates that there is obvious fractal characteristics in conglomerate reservoirs of Kilamayi oil fields. Well log data in EOR pilot area are used to get distribution profile of parameters including permeability, porosity, water saturation and shale content.

Respiratory Protection Program. Programmatic description

Energy Technology Data Exchange (ETDEWEB)

Brooks, J.M.; Porter, W.E.

1986-03-01

The ORNL Respirator Program is designed to provide employees with devices which afford maximum protection with minimum inconvenience and discomfort. Teamwork is essential since a comprehensive program involves the Medical Department, the Industrial Hygiene Department, Radiation and Safety Surveys, the Operations Division, Quality Assurance and Inspection, and the Fire Department. The purpose of this manual is to describe in detail the ORNL Respirator Program. Included are discussions of the following elements: quality assurance, selection, fit-testing, maintenance and issue, certified breathing air for self-contained breathing apparatus, inspection, program surveillance, available devices, and standard operating procedures. As program modifications develop and improvements are made, periodic revisions may be necessary. The Industrial Hygiene Department will perform this task on an ''as required'' basis.

RIMS Program Description.

Science.gov (United States)

Kraepelien, Hans

Computer routines for the translation of teacher-prepared mark sense forms to magnetic tape are described. The program, Receiving IMS (RIMS), is part of the Southwest Regional Laboratory's (SWRL) Instructional Management System (IMS). It accepts mark sense sheets from remotely located Xerox 660 scanner copiers and/or IMS update information from…

Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

Energy Technology Data Exchange (ETDEWEB)

Soederbaeck, Bjoern [ed.

2008-06-15

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

International Nuclear Information System (INIS)

Soederbaeck, Bjoern

2008-06-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

Strategic environmental safety inspection for the National disposal program. Description of the inspection volume. Documentation for the scoping team

International Nuclear Information System (INIS)

2015-01-01

The Strategic environmental safety inspection for the National disposal program covers the following topics: Legal framework: determination of the requirement for an environmental inspection program, coordination of the scoping team into the overall context; environmental targets; approach for assessment and evaluation of environmental impact, description of the inspection targets for the strategic environmental inspection; consideration of alternatives.

System description of the Repository-Only System for the FY 1990 systems integration program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs

Lake and lake-related drainage area parameters for site investigation program

Energy Technology Data Exchange (ETDEWEB)

Blomqvist, P.; Brunberg, A.K. [Uppsala Univ. (Sweden). Dept. of Limnology; Brydsten, L [Umeaa Univ. (Sweden). Dept. of Ecology and Environmental Science

2000-09-01

In this paper, a number of parameters of importance to a preliminary determination of the ecological function of lakes are presented. The choice of parameters have been made with respect to a model for the determination of the nature conservation values of lakes which is currently being developed by the authors of this report, but is also well suited for a general description of the lake type and the functioning of the inherent ecosystem. The parameters have been divided into five groups: (1) The location of the object relative important gradients in the surrounding nature; (2) The lake catchment area and its major constituents; (3) The lake morphometry; (4) The lake ecosystem; (5) Human-induced damages to the lake ecosystem. The first two groups, principally based on the climate, hydrology, geology and vegetation of the catchment area represent parameters that can be used to establish the rarity and representativity of the lake, and will in the context of site investigation program be used as a basis for generalisation of the results. The third group, the lake morphometry parameters, are standard parameters for the outline of sampling programmes and for calculations of the physical extension of different key habitats in the system. The fourth group, the ecosystem of the lake, includes physical, chemical and biological parameters required for determination of the stratification pattern, light climate, influence from the terrestrial ecosystem of the catchment area, trophic status, distribution of key habitats, and presence of fish and rare fauna and flora in the lake. In the context of site investigation program, the parameters in these two groups will be used for budget calculations of the flow of energy and material in the system. The fifth group, finally, describes the degree on anthropogenic influence on the ecosystem and will in the context of site investigation programmes be used to judge eventual malfunctioning within the entire, or parts of, the lake

Lake and lake-related drainage area parameters for site investigation program

International Nuclear Information System (INIS)

Blomqvist, P.; Brunberg, A.K.; Brydsten, L

2000-09-01

In this paper, a number of parameters of importance to a preliminary determination of the ecological function of lakes are presented. The choice of parameters have been made with respect to a model for the determination of the nature conservation values of lakes which is currently being developed by the authors of this report, but is also well suited for a general description of the lake type and the functioning of the inherent ecosystem. The parameters have been divided into five groups: 1) The location of the object relative important gradients in the surrounding nature; 2) The lake catchment area and its major constituents; 3) The lake morphometry; 4) The lake ecosystem; 5) Human-induced damages to the lake ecosystem. The first two groups, principally based on the climate, hydrology, geology and vegetation of the catchment area represent parameters that can be used to establish the rarity and representativity of the lake, and will in the context of site investigation program be used as a basis for generalisation of the results. The third group, the lake morphometry parameters, are standard parameters for the outline of sampling programmes and for calculations of the physical extension of different key habitats in the system. The fourth group, the ecosystem of the lake, includes physical, chemical and biological parameters required for determination of the stratification pattern, light climate, influence from the terrestrial ecosystem of the catchment area, trophic status, distribution of key habitats, and presence of fish and rare fauna and flora in the lake. In the context of site investigation program, the parameters in these two groups will be used for budget calculations of the flow of energy and material in the system. The fifth group, finally, describes the degree on anthropogenic influence on the ecosystem and will in the context of site investigation programmes be used to judge eventual malfunctioning within the entire, or parts of, the lake ecosystem

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification

International Nuclear Information System (INIS)

1993-08-01

The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program

Computer automation of continuous-flow analyzers for trace constituents in water. Volume 4. Description of program segments. Part 2. TAAINRE

International Nuclear Information System (INIS)

Crawford, R.W.

1979-01-01

TAAINRE, the second program in the series of programs necessary in automating the Technicon AutoAnalyzer, is presented. A flow chart and sequence list that describes and illustrates the function of each logical group of coding, and a description of the contents and function of each section and subroutine in the program is included. In addition, all arrays, strings, and variables are listed and defined, and a sample program listing with a complete list of symbols and references provided

Computer automation of continuous-flow analyzers for trace constituents in water. Volume 4. Description of program segments. Part 1. TAAIN

International Nuclear Information System (INIS)

Crawford, R.W.

1979-01-01

This report describes TAAIN, the first program in the series of programs necessary in automating the Technicon AutoAnalyzer. A flow chart and sequence list that describes and illustrates each logical group of coding, and a description of the contents and functions of each section and subroutine in the program is included. In addition, all arrays, strings, and variables are listed and defined, and a sample program listing with a complete list of symbols and references is provided

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-07-08

The regulatory research program is intended to augment and extend the Atomic Energy Control Board`s regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year.

Regulatory research program for 1986/87 project descriptions. Information bulletin 86-1

International Nuclear Information System (INIS)

1986-01-01

The regulatory research program is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into ten main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 92 projects are planned for 1986/87, including a number which are ongoing from the previous fiscal year

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

Science.gov (United States)

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

Materials program for magnetic fusion energy

International Nuclear Information System (INIS)

Zwilsky, K.M.; Cohen, M.M.; Finfgeld, C.R.; Reuther, T.C.

1978-01-01

The Magnetic Fusion Reactor Materials Program is currently operating at a level of $7.8M. The program is divided into four technical areas which cover both short and long term problems. These are: Alloy Development for Irradiation Performance, Damage Analysis and Fundamental Studies, Plasma-Materials Interaction, and Special Purpose Materials. A description of the program planning process, the continuing management structure, and the resulting documents is presented

25 CFR 2.19 - Action by Area Directors and Education Programs officials on appeal.

Science.gov (United States)

2010-04-01

... Programs officials on appeal. (a) Area Directors, Area Education Programs Administrators, Agency... 25 Indians 1 2010-04-01 2010-04-01 false Action by Area Directors and Education Programs officials on appeal. 2.19 Section 2.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR PROCEDURES...

Economics of area-wide sit control programs

International Nuclear Information System (INIS)

Enkerlin, Walther

2003-01-01

The economic feasibility of using the sterile insect technique (SIT) to control certain key insect pests has been demonstrated clearly. The successful implementation of a number of area-wide and large-scale SIT programs has produced substantial economic benefits for the beneficiaries of the technology. The economic advantages of this technology will become more evident as indirect benefits of SIT application are incorporated into total program benefit estimates. Awareness of the technical and economic advantages of the SIT, and market forces favoring the use of environmentally clean pest control methods, will encourage private investment in this technology. (author)

Program description for the program Fuel program sustainability July 1, 2011 through June 30, 2015; Programbeskrivning foer programmet Braensleprogrammet haallbarhet 1 juli 2011 till och med 30 juni 2015

Energy Technology Data Exchange (ETDEWEB)

2011-04-15

The Fuel program sustainability is included as one of three programs in a cohesive commitment to increased, sustainable and efficient production and use of indigenous and renewable fuels that are implemented by the Swedish Energy Agency from July 1, 2011 to June 30, 2015. The program focuses on issues of environment and ecological sustainability of the production of biofuels, and systems and resource issues concerning the use. It does not include purely technical issues related to biofuels production or processes in which fuel is converted to heat, electricity or fuel. Questions about fuel supply and fuel processing / scale combustion are treated in the parallel running programs; the Fuel program supply and the Fuel program conversion. The four-year program will commence on July 1, 2011 and will run until June 30, 2015 and has an annual budget of total SEK 16 millions. Ambiguities in the environmental area may through various regulations mean various forms of barriers on the biofuel market. The Fuel program sustainability aims to sort out such ambiguities and, if possible, eliminate such obstacles, identify solutions and develop opportunities. The availability of biofuels and croplands is limited relative to needs. Thus the program also aims to describe the resource efficiency and climate benefits of current biofuel chains, and the possibility of using instruments to stimulate good practice. The program consists of sub-areas that partly overlap. - The sub-area Environment and sustainability focuses on how biofuel production will be designed to meet national and international environmental objectives and sustainability criteria. - The sub-area Biofuels and greenhouse gases describes different climate aspects related to production and exploitation of biofuels. - The sub-area System and market focuses on resource- and climate-efficient solutions in a system perspective, and how the bio-energy system can be affected by policy instruments

Radiation protection program of Petrobras in industrial radiography area

International Nuclear Information System (INIS)

Signorini, M.

1988-01-01

Industrial hygiene has as main purpose the preservation of employees physical integrity when exposed to certain agressive agents. PETROBRAS Industrial hygiene program forecasts preventive policies in several specific fields. For the ionizing radiations area it was developed the ''Radiologic Protection Program'' which also deals with specific actions in industrial radiography jobs. These actions are hereinafter presented. (C.M.) [pt

HIGHWAY, a transportation routing model: program description and revised users' manual

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.

1983-10-01

A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire Interstate System, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of Interstate highways or routes that will bypass urbanized areas containing populations greater than 100,000 persons. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

A Census of Prison-Based Drug Treatment Programs: Implications for Programming, Policy, and Evaluation

Science.gov (United States)

Welsh, Wayne N.; Zajac, Gary

2004-01-01

Despite a growing realization that unmeasured programmatic differences influence prison-based drug treatment effectiveness, few attempts to systematically measure such differences have been made. To improve program planning and evaluation in this area, we developed a census instrument to collect descriptive information about 118 prison-based drug…

AGRIS: Description of computer programs

International Nuclear Information System (INIS)

Schmid, H.; Schallaboeck, G.

1976-01-01

The set of computer programs used at the AGRIS (Agricultural Information System) Input Unit at the IAEA, Vienna, Austria to process the AGRIS computer-readable data is described. The processing flow is illustrated. The configuration of the IAEA's computer, a list of error messages generated by the computer, the EBCDIC code table extended for AGRIS and INIS, the AGRIS-6 bit code, the work sheet format, and job control listings are included as appendixes. The programs are written for an IBM 370, model 145, operating system OS or VS, and require a 130K partition. The programming languages are PL/1 (F-compiler) and Assembler

Description of a medical writing rotation for a postgraduate pharmacy residency program.

Science.gov (United States)

Brown, Jamie N; Tiemann, Kelsey A; Ostroff, Jared L

2014-04-01

To provide a description of a pharmacy residency rotation dedicated to medical writing developed at a tertiary care academic medical center. Contribution to the medical literature is an important component of professional pharmacy practice, and there are many benefits seen by practitioners actively involved in scholarly activities. Residency programs have an opportunity to expand beyond the standard roles of postgraduate pharmacist training but rarely is there formal instruction on medical writing skills or are scholarship opportunities provided to residents. In order to address this deficiency, a residency program may consider the implementation of a formal Medical Writing rotation. This rotation is designed to introduce the resident to medical writing through active discussion on medical writing foundational topics, engage the resident in a collaborative review of a manuscript submitted to a peer-reviewed professional journal, and support the resident in the design and composition of manuscript of publishable quality. A structured Medical Writing rotation during a pharmacy resident's training can help develop the skills necessary to promote scholarly activities and foster resident interest in future pursuit of professional medical writing.

NRC/RSR Data Bank Program description

International Nuclear Information System (INIS)

Bankert, S.F.

1979-01-01

The United States Nuclear Regulatory Commission (NRC) has established the NRC/Reactor Safety Research (RSR) Data Bank Program to collect, store, and make available data from the many domestic and foreign water reactor safety research programs. Local direction of the program is provided by EG and G Idaho, Inc., at Idaho National Engineering Laboratory. The NRC/RSR Data Bank Program provides a central computer storage mechanism and access software for data to be used by code development and assessment groups in meeting the code and correlation needs of the nuclear industry. The administrative portion of the program provides data entry, documentation, and training and advisory services to users and the NRC. The NRC/RSR Data Bank Program and the capabilities of the data access software are described

Tanks focus area multiyear program plan - FY96-FY98

International Nuclear Information System (INIS)

1995-07-01

The Tanks Focus Area (TFA) Multiyear Program Plan (MYPP) presents the recommended TFA technical program. The recommendation covers a 3-year funding outlook (FY96-FY98), with an emphasis on FY96 and FY97. In addition to defining the recommended program, this document also describes the processes used to develop the program, the implementation strategy for the program, the references used to write this report, data on the U.S. Department of Energy (DOE) tank site baselines, details on baseline assumptions and the technical elements, and a glossary

Summary description of the Babcock and Wilcox integrated nuclear design system

International Nuclear Information System (INIS)

Wittkopf, W.A.

1976-03-01

The Babcock and Wilcox integrated nuclear design system is divided into three broad areas: basic nuclear data processing, applications data processing, and nuclear design calculations. In basic nuclear data processing, basic nuclear data are collected, evaluated, and processed into a specified fine-energy mesh multigroup data file called a Master Library. In applications data processing, data for selected materials are retrieved from the Master Library and processed into an optimally structured, multigroup Production Library. Using these data and input descriptions of cells or regions, neutron spectra are generated and few-group constants are computed and fitted as a function of fuel burnup, initial enrichment, temperature, etc. In nuclear design calculations, few-group cross-section fits and descriptions of each core region and core geometry are input to a diffusion-depletion program or a nodal program that computes core reactivity, core power distribution, control rod worth, fuel cycle studies, core operating limitations, etc

River and river-related drainage area parameters for site investigation program

Energy Technology Data Exchange (ETDEWEB)

Blomqvist, P.; Brunberg, A.K. [Uppsala Univ. (Sweden). Dept. of Limnology; Brydsten, L. [Umeaa Univ. (Sweden). Dept. of Ecology and Environmental Science

2001-05-01

In this paper, a number of parameters of importance to a determination of the function of running waters as transport channels for material from the continents to the sea are presented. We have assumed that retention mechanisms of material in the river and in the riparian zone will be covered by special investigations but tried to create a platform for such investigations by quantification of the extension of different main habitats. The choice of parameters has been made so that also the nature conservation value of the river can be preliminary established, and includes a general description of the river type and the inherent ecosystem. The material links directly to that presented in a previous report concerning site investigation programmes for lakes. The parameters have been divided into five groups: 1) The location of the object relative important gradients in the surrounding nature; 2) The river catchment area and its major constituents; 3) The river morphometry; 4) The river ecosystem; 5) Human-induced damages to the river ecosystem. The first two groups, principally based on the climate, hydrology, geology and vegetation of the catchment area, represent parameters that can be used to establish the rarity and representativity of the system, and will in the context of site investigation program be used as a basis for generalisation of the results. The third group, the river morphometry parameters, are standard parameters for the outline of sampling programmes and for calculations of the physical extension of key habitats in the system. The fourth group, the ecosystem of the river, includes physical, chemical and biological parameters required for determination of the influence from the terrestrial ecosystem of the catchment area, nutrient status, distribution of different habitats, and presence of fish in the system. In the context of site investigation program, the parameters in these two groups will be used for budget calculations of the flow of energy and

River and river-related drainage area parameters for site investigation program

International Nuclear Information System (INIS)

Blomqvist, P.; Brunberg, A.K.; Brydsten, L.

2001-05-01

In this paper, a number of parameters of importance to a determination of the function of running waters as transport channels for material from the continents to the sea are presented. We have assumed that retention mechanisms of material in the river and in the riparian zone will be covered by special investigations but tried to create a platform for such investigations by quantification of the extension of different main habitats. The choice of parameters has been made so that also the nature conservation value of the river can be preliminary established, and includes a general description of the river type and the inherent ecosystem. The material links directly to that presented in a previous report concerning site investigation programmes for lakes. The parameters have been divided into five groups: 1) The location of the object relative important gradients in the surrounding nature; 2) The river catchment area and its major constituents; 3) The river morphometry; 4) The river ecosystem; 5) Human-induced damages to the river ecosystem. The first two groups, principally based on the climate, hydrology, geology and vegetation of the catchment area, represent parameters that can be used to establish the rarity and representativity of the system, and will in the context of site investigation program be used as a basis for generalisation of the results. The third group, the river morphometry parameters, are standard parameters for the outline of sampling programmes and for calculations of the physical extension of key habitats in the system. The fourth group, the ecosystem of the river, includes physical, chemical and biological parameters required for determination of the influence from the terrestrial ecosystem of the catchment area, nutrient status, distribution of different habitats, and presence of fish in the system. In the context of site investigation program, the parameters in these two groups will be used for budget calculations of the flow of energy and

Secondary Content Area Reading: Challenging Sell for Professors in Teacher Education Programs

Science.gov (United States)

Almerico, Gina M.

2011-01-01

Candidates in teacher education programs who are training to become secondary education content area teachers are required in most programs to enroll in a class dealing with teaching reading in the content areas. A number of these candidates reluctantly attend these courses and question the appropriateness of the content they are required to…

Hypersonic ramjet experiment project. Phase 1: Computer program description, ramjet and scramjet cycle performance

Science.gov (United States)

Jackson, R. J.; Wang, T. T.

1974-01-01

A computer program was developed to describe the performance of ramjet and scramjet cycles. The program performs one dimensional calculations of the equilibrium, real-gas internal flow properties of the engine. The program can be used for the following: (1) preliminary design calculation and (2) design analysis of internal flow properties corresponding to stipulated flow areas. Only the combustion of hydrogen in air is considered in this case.

Small Water System Management Program: 100 K Area

International Nuclear Information System (INIS)

Hunacek, G.S. Jr.

1995-01-01

Purposes of this document are: to provide an overview of the service and potable water system presently in service at the Hanford Site's 100 K Area; to provide future system forecasts based on anticipated DOE activities and programs; to delineate performance, design, and operations criteria; and to describe planned improvements. The objective of the small water system management program is to assure the water system is properly and reliably managed and operated, and continues to exist as a functional and viable entity in accordance with WAC 246-290-410

Development of Environmental Education Programs for Protected Areas in Madagascar

Science.gov (United States)

Ormsby, Alison

2007-01-01

Environmental education programs for schools in the peripheral zone of protected areas in Madagascar are still needed in numerous locations. My research investigated the status of environmental education and communication (EE&C) programs at Masoala National Park, Madagascar, as well as the attitudes of local residents toward the park and park…

Description of Dogs and Owners in Outdoor Built-Up Areas and Their More-Than-Human Issues

Science.gov (United States)

Gaunet, Florence; Pari-Perrin, Elodie; Bernardin, Geneviève

2014-09-01

Tensions are generated by the inevitable presence of dogs accompanying humans in cities. Built-up outdoor areas, spaces that are "in between" the home and dog parks, are widely frequented by dogs and their owners. The present case study, performed in Lyon (France), is the first to provide a description of these dyads in areas that vary according to terrain, district, dog legislation and use in three areas: a busy street where dogs are allowed and a park and a square where dogs are forbidden. Dog-owner profiles were identified. They adjusted their presence differently across areas and according to anthropogenic and ecological pressures, such as day of the week, time of day, weather, frequentation, and legislation. They mutually adapted their behaviors. Interactions between dogs or owners and other social agents were few; dogs primarily sniffed and urinated. There was little barking, no aggression, minor impact on the environment, and, despite instances of dogs appropriating forbidden areas and dogs off their leashes, the dogs seemed to go virtually unnoticed. The study shows how the need for more-than-human areas is evident in outdoor built-up areas (for instance, the results on types of interaction and activity across areas, absence of a leash, and appropriation of forbidden areas) as well as how the cultural and natural aspects of dogs play out. The results suggest that dog regulations should be adjusted in outdoor built-up areas and that dog parks should be developed.

Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

International Nuclear Information System (INIS)

Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel; Gylling, Bjoern; Marsic, Niko

2006-04-01

The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes

Regional hydrogeological simulations using CONECTFLOW. Preliminary site description. Laxemar sub area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Hartley, Lee; Hunter, Fiona; Jackson, Peter; McCarthy, Rachel [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

2006-04-15

The main objective of this study is to support the development of a preliminary Site Description of the Laxemar subarea on a regional-scale based on the available data of November 2004 (Data Freeze L1.2). A more specific objective of this study is to assess the role of both known and less quantified hydrogeological conditions in determining the present-day distribution of saline groundwater in the Laxemar subarea on a regional-scale. An improved understanding of the palaeo-hydrogeology is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. This is to serve as a basis for describing the present hydrogeological conditions on a local-scale, as well as predictions of future hydrogeological conditions. Another objective is to assess the flow-paths from the local-scale model domain, based on the present-day flow conditions, to assess the distribution of discharge and recharge areas connected to the flow at the approximate repository depth to inform the Preliminary Safety Evaluation. Significant new features incorporated in the modelling include: a depth variation in hydraulic properties within the deformation zones; a dependence on rock domain and depth in the rock mass properties in regional-scale models; a more detailed model of the overburden in terms of a layered system of spatially variable thickness made up of several different types of Quaternary deposits has been implemented; and several variants on the position of the watertable have been tried. The motivation for introducing a dependence on rock domain was guided by the hydrogeological interpretation with the aim of honouring the observed differences in hydraulic properties measured at the boreholes.

200 Areas Remedial Investigation/Feasibility Study Implementation Plan - Environmental Restoration Program

International Nuclear Information System (INIS)

Knepp, A. J.

1999-01-01

The 200 Areas Remedial Investigation/Feasibility Study Implementation Plan - Environmental Restoration Program (Implementation Plan) addresses approximately 700 soil waste sites (and associated structures such as pipelines) resulting from the discharge of liquids and solids from processing facilities to the ground (e.g., ponds, ditches, cribs,burial grounds) in the 200 Areas and assigned to the Environmental Restoration Program. The Implementation Plan outlines the framework for implementing assessment activities in the 200 Areas to ensure consistency in documentation, level of characterization, and decision making. The Implementation Plan also consolidates background information and other typical work plan materials, to serve as a single referenceable source for this type of information

The diffusion of the distance Entomology Master's Degree Program at the University of Nebraska Lincoln: A descriptive case study

Science.gov (United States)

Hubbell, Jody M.

This study explored three selected phases of Rogers' (1995) Diffusion of Innovations Theory to examine the diffusion process of the distance Entomology Master's Degree program at the University of Nebraska, Lincoln. A qualitative descriptive case study approach incorporated semi-structured interviews with individuals involved in one or more of the three stages: Development, Implementation, and Institutionalization. Documents and archival evidence were used to triangulate findings. This research analyzed descriptions of the program as it moved from the Development, to the Implementation, and finally, the Institutionalization stages of diffusion. Each respective stage was examined through open and axial coding. Process coding identified themes common to two or more diffusion stages, and explored the evolution of themes from one diffusion stage to the next. At a time of significant budget constraints, many departments were faced with the possibility of merger or dissolution. The Entomology Master's Degree Program evolved from being an entrepreneurial means to prevent departmental dissolution to eventually being viewed as a model for the development of similar programs across this university and other institutions of higher education. During this evolution, the program was reinvented to meet the broader needs of industry and a global student market. One finding not consistent with Rogers' model was that smaller, rather than larger, departmental size contributed to the success of the program. Within this small department, faculty members were able to share their experiences and knowledge with each other on a regular basis, which promoted greater acceptance of the distance program. How quality and rigor may be defined and measured was a key issue in each respective stage. In this specific case, quality and rigor was initially a comparison of on-campus and distance course content and then moved to program-based assessment and measures of student outcomes such as job

Department of Energy WindSentinel Loan Program Description

Energy Technology Data Exchange (ETDEWEB)

Shaw, William J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sturges, Mark H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-12-01

The U.S. Department of Energy (DOE) currently owns two AXYS WindSentinel buoys that collect a comprehensive set of meteorological and oceanographic data to support resource characterization for wind energy offshore. The two buoys were delivered to DOE’s Pacific Northwest National Laboratory (PNNL) in September, 2014. After acceptance testing and initial performance testing and evaluation at PNNL’s Marine Sciences Laboratory in Sequim, Washington, the buoys have been deployed off the U.S. East Coast. One buoy was deployed approximately 42 km east of Virginia Beach, Virginia from December, 2014 through June, 2016. The second buoy was deployed approximately 5 km off Atlantic City, New Jersey in November, 2015. Data from the buoys are available to the public. Interested parties can create an account and log in to http://offshoreweb.pnnl.gov. In response to a number of inquiries and unsolicited proposals, DOE’s Wind Energy Technologies Office is implementing a program, to be managed by PNNL, to lend the buoys to qualified parties for the purpose of acquiring wind resource characterization data in areas of interest for offshore wind energy development. This document describes the buoys, the scope of the loans, the process of how borrowers will be selected, and the schedule for implementation of this program, including completing current deployments.

Thermal modelling. Preliminary site description. Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

2005-08-01

This report presents the thermal site descriptive model for the Forsmark area, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for two different lithological domains (RFM029 and RFM012, both dominated by granite to granodiorite (101057)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Two alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Forsmark area, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. Results indicate that the mean of thermal conductivity is expected to exhibit a small variation between the different domains, 3.46 W/(mxK) for RFM012 to 3.55 W/(mxK) for RFM029. The spatial distribution of the thermal conductivity does not follow a simple model. Lower and upper 95% confidence limits are based on the modelling results, but have been rounded of to only two significant figures. Consequently, the lower limit is 2.9 W/(mxK), while the upper is 3.8 W/(mxK). This is applicable to both the investigated domains. The temperature dependence is rather small with a decrease in thermal conductivity of 10.0% per 100 deg C increase in temperature for the dominating rock type. There are a number of important uncertainties associated with these results. One of the uncertainties considers the representative scale for the canister. Another important uncertainty is the methodological uncertainties associated with the upscaling of thermal conductivity from cm-scale to canister scale. In addition, the representativeness of rock samples is

Clean Coal Technology Demonstration Program: Program Update 1998

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

"In Our Corner": A Qualitative Descriptive Study of Patient Engagement in a Community-Based Care Coordination Program.

Science.gov (United States)

Sefcik, Justine S; Petrovsky, Darina; Streur, Megan; Toles, Mark; O'Connor, Melissa; Ulrich, Connie M; Marcantonio, Sherry; Coburn, Ken; Naylor, Mary D; Moriarty, Helene

2018-03-01

The purpose of this study was to explore participants' experience in the Health Quality Partners (HQP) Care Coordination Program that contributed to their continued engagement. Older adults with multiple chronic conditions often have limited engagement in health care services and face fragmented health care delivery. This can lead to increased risk for disability, mortality, poor quality of life, and increased health care utilization. A qualitative descriptive design with two focus groups was conducted with a total of 20 older adults enrolled in HQP's Care Coordination Program. Conventional content analysis was the analytical technique. The overarching theme resulting from the analysis was "in our corner," with subthemes "opportunities to learn and socialize" and "dedicated nurses," suggesting that these are the primary contributing factors to engagement in HQP's Care Coordination Program. Study findings suggest that nurses play an integral role in patient engagement among older adults enrolled in a care coordination program.

A Survey of Undergraduate Marketing Programs: An Empirical Analysis of Knowledge Areas and Metaskills

Science.gov (United States)

Finch, David; Nadeau, John; O'Reilly, Norm

2018-01-01

Scholars suggest that the dynamic nature of marketing has put both the marketing profession and marketing education at a crossroads. This study is an analysis of marketing programs by conceptual knowledge and metaskills. In a content analysis of course descriptions for 523 undergraduate marketing courses in Canada from 40 universities, the…

Preventing Substance Use among High School Athletes: The ATLAS and ATHENA Programs

Science.gov (United States)

Goldberg, Linn; Eliot, Diane

2005-01-01

This article will provide information about two worthwhile programs that deal with education of high school athletes about use and abuse of steroids and other areas. Based on rationale and expressed need, program descriptions will be provided including summaries of relevant program results. Guidelines for what practitioners need to consider when…

Quality Assurance Program Description

Energy Technology Data Exchange (ETDEWEB)

Halford, Vaughn Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ryder, Ann Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-07-01

Effective May 1, 2017, led by a new executive leadership team, Sandia began operating within a new organizational structure. National Technology and Engineering Solutions of Sandia (Sandia’s) Quality Assurance Program (QAP) was established to assign responsibilities and authorities, define workflow policies and requirements, and provide for the performance and assessment of work.

International Nuclear Model. Volume 3. Program description. Appendix A-H (Part 1)

International Nuclear Information System (INIS)

Andress, D.

1985-01-01

The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decisions based on an input set of technical, economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. This volume contains appendices A through H including a description of subroutines and the Fortran listing of the program

Implementasi Program Bimbngan dan Konseling

Directory of Open Access Journals (Sweden)

Annas Kamil

2016-10-01

Full Text Available Abstract: Basic tasks the teacher supervisor is compiling the program guidance and counseling, implement the program guidance and counseling, evaluate program implementation guidance and counseling, analysis of the results of the implementation of the guidance and counseling and follow-up program implementation guidance and counseling to learners who becomes his responsibility. In fact guidance and counseling teachers of government senior high schools in Solok Regency did not elaborate on the program guidance and counseling in accordance with the types of services and areas of development without any elaboration time allocation, class of service to be provided, the material will be presented and didn’t have the weekly program of guidance and counseling. This study used a descriptive approach. The population of the research is all of guidance and counseling teachers in government senior high schools in Solok Regency, totally 49 people with sampling techniques namely the sampling area of 32 people. Data collection techniques using question form. The Data were analyzed using percentage technique.

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Bechtel Jacobs

2009-02-26

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

Program For Local-Area-Network Electronic Mail

Science.gov (United States)

Weiner, Michael J.

1989-01-01

MailRoom is computer program for local-area network (LAN) electronic mail. Enables users of LAN to exchange electronically notes, letters, reminders, or any sort of communication via their computers. Links all users of LAN into communication circle in which messages created, sent, copied, printed, downloaded, uploaded, and deleted through series of menu-driven screens. Includes feature that enables users to determine whether messages sent have been read by receivers. Written in Microsoft QuickBasic.

A Comprehensive Review of Selected Business Programs in Community Colleges and Area Vocational-Technical Centers. Program Review Report.

Science.gov (United States)

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

In 1988, a review was conducted of the business component of associate in arts and associate in science (AS) degree programs, and of the certificate programs in business in Florida community colleges and area vocational-technical centers. Focusing primarily on business programs in marketing, general business management, and small business…

Clean Coal Technology Demonstration Program: Program Update 2001

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2002-07-30

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

Atmospheric chemistry: Description of the area of performance and a working plan

Science.gov (United States)

Kirchhoff, Volker W. J. H.

1986-11-01

INPE's program in Atmospheric Chemistry Research is described. Research in this area is concerned with atmospheric gases and their chemical reactions, production and loss rates, and their interactions with the biosphere. Atmospheric chemistry includes concepts in Physics, Chemistry, Meteorology, and Biology, which gives it a strong interdisciplinary character. The interaction of some of the atmospheric gases with the biosphere, such as ozone, is very strong and direct. Studying atmospheric chemistry is, therefore, of direct interest to man and the quality of life. Details are described to define the objectives of study, in particular those of our research program at INPE. A working plan is proposed in order to reach the defined goals. Owing to the large anthropogenic interference in the balance of the natural atmosphere it is anticipated that a better understanding of Atmospheric Chemistry will be the great scientific challenge of the next decade.

200 Areas soil remediation strategy -- Environmental Restoration Program

International Nuclear Information System (INIS)

1996-09-01

The remediation and waste management activities in the 200 Areas of the Hanford Site (located in Richland, Washington) currently range from remediating groundwater, remediating source units (contaminated soils), decontaminating and decommissioning of buildings and structures, maintaining facilities, managing transuranic, low-level and mixed waste, and operating tank farms that store high-level waste. This strategy focuses on the assessment and remediation of soil that resulted from the discharge of liquids and solids from processing facilities to the ground (e.g., ponds, ditches, cribs, burial grounds) in the 200 Areas and addresses only those waste sites assigned to the Environmental Restoration Program

MARC Program Research and Development: A Progress Report

Directory of Open Access Journals (Sweden)

Henriette D. Avram

1969-12-01

Full Text Available A description of some of the research and development activities at the Library of Congress to expand the capabilities of the MARC System. Gives details of the MARC processing format used by the Library and then describes programming work in three areas: 1 automatic tagging of data elements by format recognition programs; 2 file analysis by a statistical program called GENESIS; and 3 information retrieval using the MARC Retriever.

Plutonium immobilization project development and testing technical project office quality assurance program description

International Nuclear Information System (INIS)

Gould, T.H.; MacLean, L.M.; Ziemba, J.M.

1999-01-01

The Plutonium Immobilization Project (PIP) is one of several fissile materials disposition projects managed by the Department of Energy (DOE) Office of Fissile Materials Disposition (OFMD). The PIP is expected to evolve from the current Development and Testing (D and T) effort, to design, to construction, and finally to operations. Overall management and technical management of the D and T effort resides at the Lead Laboratory, Lawrence Livermore National Laboratory (LLNL), through the LLNL Manager, Fissile Materials Disposition Program (FMDP). Day to day project activities are managed by the D and T Technical Project Office (TPO), which reports to the LLNL Manager, FMDP. The D and T TPO consists of the Technical Manager, the TPO Quality Assurance (QA) Program Manager, and TPO Planning and Support Staff. This Quality Assurance Program Description (QAPD) defines the QA policies and controls that will be implemented by these TPO personnel in their management of D and T activities. This QAPD is consistent with and responsive to the Department of Energy Fissile Materials Disposition Program Quality Assurance Requirements Document (FMDP QARD). As the Project and upper level requirement's documents evolve, this QAPD will be updated as necessary to accurately define and describe the QA Program and Management of the PIP. The TPO has a policy that all development and testing activities be planned, performed and assessed in accordance with its customer's requirements, needs and expectations, and with a commitment to excellence and continuous improvement. The TPO QAPD describes implementation requirements which, when completed, will ensure that the project development and testing activities conform to the appropriate QA requirements. For the program to be effective, the TPO QA Program Manager will ensure that each site participating in D and T activities has developed a QAPD, which meets the customer's requirements, and has a designated quality leader in place. These customer

Descriptive study of external employee assistance program providers (EAP) in Japan.

Science.gov (United States)

Muto, Takashi; Haruyama, Yasuo; Higashi, Toshiaki

2012-01-01

The mental health problems of employees have become a major occupational health issue in Japan. External employee assistance program providers (EAP) have become important in mental health care for workers, but their activities are poorly documented. This descriptive study was undertaken to clarify the status and future tasks of EAP in Japan. The subjects were all EAP (n=27) registered in the Japanese Chapter of Employee Assistance Professionals Association. The questionnaire survey was conducted in January 2007. We received 13 replies, a response rate of 54.2%. Most EAP provided seminars, stress checks, stress management, counseling, and support for a return to work. The number of EAP contracted with small-scale enterprises was small. EAP communicated infrequently with companies. To promote the use of EAP, their advertising, education and training of staff, accumulation of scientific evidence, development of an official certification system for staff, and improvement of contents of EAP services were cited.

Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2000

International Nuclear Information System (INIS)

Bivins, Steven R; Stoetzel, Gregory A

2001-01-01

Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)-(4) and Article 511.1 of the DOE Standard Radiological Control, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2000 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program

Solid Waste Program technical baseline description

Energy Technology Data Exchange (ETDEWEB)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Postdoctoral pharmacy industry fellowships: a descriptive analysis of programs and postgraduate positions.

Science.gov (United States)

Melillo, Stephanie; Gangadharan, Amy; Johnson, Hiliary; Schleck, Patrick; Steinberg, Michael; Alexander, James G

2012-01-01

Postdoctoral pharmacy industry fellowship programs and the employment of fellowship graduates are described. A list of postgraduate industry fellowships was gathered from the 2009 ASHP Midyear Clinical Meeting. Data regarding program characteristics were collected using the Personnel Placement Service database and program-specific brochures. After data compilation, a standardized survey was sent in January 2010 via e-mail to the point of contact for all programs to confirm the accuracy of the program's characteristics. Only academically affiliated industry fellowship programs were analyzed. Retrospective data were collected regarding the first position of employment for all fellows who graduated from the program between 2005 and 2009 and the position of those same individuals at the time of survey completion. Surveys were sent to 64 postgraduate industry fellowship programs affiliated with a school of pharmacy, 56 (87.5%) of whom responded. The departmental breakdown for positions offered (n = 75) across all academically affiliated industry fellowship programs (including nonresponders) was as follows: medical affairs (38.7%, n = 29), clinical research (32.0%, n = 24), regulatory affairs (9.3%, n = 7), commercial (8.0%, n = 6), health economics and outcomes research (8.0%, n = 6), and pharmacovigilance (4.0%, n = 3). Data from fellows during years 1-5 after completion of the industry fellowship indicated that 90.5% of former fellows remained in the industry (n = 238). The postgraduate industry fellowship programs surveyed indicated that the majority of fellowship graduates continued to hold positions in industry after program completion. The majority of industry fellowships and subsequent job placements occurred in the areas of medical affairs, clinical research, and regulatory affairs.

The New York State Bird Conservation Area (BCA) Program: A Model for the United States

Science.gov (United States)

M. F. Burger; D. J. Adams; T. Post; L. Sommers; B. Swift

2005-01-01

The New York State Bird Conservation Area (BCA) Program, modeled after the National Audubon Society?s Important Bird Areas Program, is based on legislation signed by Governor Pataki in 1997. New York is the first state in the nation to enact such a program. The BCA Program seeks to provide a comprehensive, ecosystem approach to conserving birds and their habitats on...

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Area monitoring dosimeter program for the Pacific Northwest National Laboratory: Results for CY 1997

International Nuclear Information System (INIS)

Bivins, S.R.; Stoetzel, G.A.

1998-07-01

In January 1993, Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the US Department of Energy (DOE) Radiological Control Manual (RCM). The purpose of the program was to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)--(3) and Article 511.1 of the RCM, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years (CY) 1993--1996 confirmed that personnel dosimetry was not needed for individuals located in areas monitored by the program. A total of 93 area thermoluminescent dosimeters (TLDs) were placed in PNNL facilities during CY 1997. The TLDs were exchanged and analyzed quarterly. All routine area monitoring TLD results were less than 50 mrem annually after correcting for worker occupancy. The results support the conclusions that personnel dosimeters are not necessary for staff, declared pregnant workers, minors, or members of the public in these monitored areas

Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 1998

International Nuclear Information System (INIS)

GA Stoetzel; SR Bivins

1999-01-01

In January 1993, Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM). The purpose of the program was to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the RCM, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-1997 confirmed that personnel dosimetry was not needed for individuals located in areas monitored by the program. A total of 97 area thermoluminescent dosimeters (TLDs) were placed in PNNL facilities during calendar year 1998. The TLDs were exchanged and analyzed quarterly. All routine area monitoring TLD results were less than 50 mrem annually after correcting for worker occupancy. The results support the conclusion that personnel dosimeters are not necessary for staff, declared pregnant workers, minors, or members of the public in these monitored areas

MAILROOM- A LOCAL AREA NETWORK ELECTRONIC MAIL PROGRAM

Science.gov (United States)

Weiner, M. J.

1994-01-01

The Mailroom program is a Local Area Network (LAN) electronic mail program. It allows LAN users to electronically exchange notes, letters, reminders, or any sort of communication via their computer. The Mailroom program links all LAN users into a communication circle where messages can be created, sent, copied, printed, downloaded, uploaded, and deleted through a series of menu-driven screens. Mailroom includes a feature which allows users to determine if a message they have sent has been read by the receiver. Each user must be separately installed and removed from Mailroom as they join or leave the network. Mailroom comes with a program that accomplishes this with minimum of effort on the part of the Network Administrator/Manager. There is also a program that allows the Network Administrator/Manager to install Mailroom on each user's workstation so that on execution of Mailroom the user's station may be identified and the configurations settings activated. It will create its own configuration and data/supporting files during the setup and installation process. The Mailroom program is written in Microsoft QuickBasic. It was developed to run on networked IBM XT/ATs or compatibles and requires that all participating workstations share a common drive. It has been implemented under DOS 3.2 and has a memory requirement of 71K. Mailroom was developed in 1988.

Rock Visualization System. Technical description (RVS v.3.5)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS v.3.5)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Program description for the program Fuel program conversion 2011-07-01 - 2015-06-30; Programbeskrivning foer programmet Braensleprogrammet omvandling 2011-07-01 - 2015-06-30

Energy Technology Data Exchange (ETDEWEB)

2011-04-15

The Fuel program conversion is included as one of three programs in a cohesive commitment to increased, sustainable and efficient production and use of indigenous and renewable fuels that are implemented by the Swedish Energy Agency during the period July 1, 2011 - June 30, 2015. The program focuses on increasing knowledge and development of technologies for processing of the fuel feedstock, and conversion to primarily heat and electricity in plants up to about 10 MW. Issues of particular concern is to strengthen competitiveness, efficiency and sustainability in the chain from raw material to end use, and increasing raw material base by developing knowledge and technologies for new materials that are current. The program includes basic and applied research, development and demonstration. Within the sub-area Processing efforts are prioritized which streamline and reduce costs in different types of processing operations. Processing here means not just technology for pelleting and briquetting, but also sub-processes that prepare, dry, handle or process raw materials in other ways. Within the sub-area Conversion to heat and electricity in the range <10 MW, the focus is principally, on one hand increasing the knowledge of the interaction between fuel and combustion plant, and on the other hand to implement results of research in collaboration with users and equipment suppliers. Furthermore, great importance is given to increasing the competitiveness of local heating in the transition from oil to renewable heat supply and the use of new fuel materials and fuels. Questions about the fuel supply from forestry and agriculture, including issues of sustainability, environment and resource use are treated in the two parallel running programs, the Fuel program supply and the Fuel program sustainability

Perry Nuclear Power Plant Area/Equipment Temperature Monitoring Program

International Nuclear Information System (INIS)

McGuire, L.L.

1991-01-01

The Perry Nuclear Power Plant Area/Equipment Temperature Monitoring Program serves two purposes. The first is to track temperature trends during normal plant operation in areas where suspected deviations from established environmental profiles exist. This includes the use of Resistance Temperature Detectors, Recorders, and Temperature Dots for evaluation of equipment qualified life for comparison with tested parameters and the established Environmental Design Profile. It also may be used to determine the location and duration of steam leaks for effect on equipment qualified life. The second purpose of this program is to aid HVAC design engineers in determining the source of heat outside anticipated design parameters. Resistance Temperature Detectors, Recorders, and Temperature Dots are also used for this application but the results may include design changes to eliminate the excess heat or provide qualified equipment (cable) to withstand the elevated temperature, splitting of environmental zones to capture accurate temperature parameters, or continued environmental monitoring for evaluation of equipment located in hot spots

Implementation of Water Safety Plans (WSPs): A Case Study in the Coastal Area in Semarang City, Indonesia

Science.gov (United States)

Budiyono; Ginandjar, P.; Saraswati, L. D.; Pangestuti, D. R.; Martini; Jati, S. P.

2018-02-01

An area of 508.28 hectares in North Semarang is flooded by tidal inundation, including Bandarharjo village, which could affect water quality in the area. People in Bandarharjo use safe water from deep groundwater, without disinfection process. More than 90% of water samples in the Bandaharjo village had poor bacteriological quality. The aimed of the research was to describe the implementation of Water Safety Plans (WSPs) program in Bandarharjo village. This was a descriptive study with steps for implementations adopted the guidelines and tools of the World Health Organization. The steps consist of introducing WSPs program, team building, training the team, examination of water safety before risk assessment, risk assessment, minor repair I, examination of water safety risk, minor repair II (after monitoring). Data were analyzed using descriptive methods. WSPs program has been introduced and formed WSPs team, and the training of the team has been conducted. The team was able to conduct risks assessment, planned the activities, examined water quality, conduct minor repair and monitoring at the source, distribution, and households connection. The WSPs program could be implemented in the coastal area in Semarang, however regularly supervision and some adjustment are needed.

Mixed Waste Focus Area program management plan

International Nuclear Information System (INIS)

Beitel, G.A.

1996-10-01

This plan describes the program management principles and functions to be implemented in the Mixed Waste Focus Area (MWFA). The mission of the MWFA is to provide acceptable technologies that enable implementation of mixed waste treatment systems developed in partnership with end-users, stakeholders, tribal governments and regulators. The MWFA will develop, demonstrate and deliver implementable technologies for treatment of mixed waste within the DOE Complex. Treatment refers to all post waste-generation activities including sampling and analysis, characterization, storage, processing, packaging, transportation and disposal

National Nanotechnology Initiative Investments by Agency and Program Component Area

Data.gov (United States)

Office of Science and Technology Policy, Executive Office of the President — Data represents National Nanotechnology Initiative investments by agency and program component area (PCA) from FY 2001 through FY 2010 (requested). While this data...

Glovebox glove change program at Technical Area 55, Los Alamos National Laboratory

International Nuclear Information System (INIS)

Olivas, J.D.; Burkett, B.O.; Weier, D.R.

1992-01-01

A formal glovebox glove change program is planned for the the gloveboxes in technical area 55 at the Los Alamos National laboratory. The program will increase worker safety by reducing the chance of having worn out gloves in service. The Los Alamos program is based on a similar successful program at the Rocky Flats Plant in Golden, Colorado. Glove change frequencies at Rocky Flats were determined statistically, and are based on environmental factors the glovebox gloves are subjected to

A health equity impact assessment umbrella program (AAPRISS) to tackle social inequalities in health: program description.

Science.gov (United States)

Lang, Thierry; Bidault, Elsa; Villeval, Mélanie; Alias, François; Gandouet, Benjamin; Servat, Martine; Theis, Ivan; Breton, Eric; Haschar-Noé, Nadine; Grosclaude, Pascale

2016-09-01

The failure to simultaneously address two objectives (increasing the average health of the population and reducing health inequalities) may have led to what has been observed in France so far: an overall decrease in mortality and increase in inequality. The Apprendre et Agir pour Réduire les Inégalités Sociales de Santé (AAPRISS) methodology is to analyze and modify interventions that are already underway in terms of their potential impact on health inequalities. It relies on partnership between researchers and actors in the health field, as well as policy makers. In this paper, we describe the program and discuss its feasibility and acceptability. This program is not a single intervention, but a process aiming at assessing and reshaping existing health programs, therefore acting as a kind of meta-intervention. The program develops scientific and methodological support stemming from co-construction methods aimed at increasing equity within the programs. Stakeholders from prevention policy-making and the health care system, as well as researchers, collaborate in defining interventions, monitoring their progress, and choosing indicators, methods and evaluation procedures. The target population is mainly the population of the greater Toulouse area. The steps of the process are described: (1) establishment of AAPRISS governance and partnerships; (2) inclusion of projects; and (3) the projects' process. Many partners have rallied around this program, which has been shown to be feasible and acceptable by partners and health actors. A major challenge is understanding each partner's expectations in terms of temporality of interventions, expected outcomes, assessment methods and indicators. Analyzing the projects has been quite feasible, and some modifications have been implemented in them in order to take inequalities in health into account. © The Author(s) 2015.

The Role of Extension Nutrition Education in Student Achievement of Nutrition Standards in Grades K-3: A Descriptive Evaluation of a School-Based Program

Science.gov (United States)

Arnold, Mary E.; Schreiber, Debera

2012-01-01

This article reports the results of a descriptive evaluation of the impact of an in-school Extension nutrition education program in a small, very rural county. The evaluation focused on understanding the nature of the role the Extension educator plays in delivering nutrition education, the impact of the program on student learning and achievement…

Rainfall, runoff, and water-quality data for the urban storm-water program in the Albuquerque, New Mexico, metropolitan area, water year 2004

Science.gov (United States)

Kelly, Todd; Romero, Orlando; Jimenez, Mike

2006-01-01

Urbanization has dramatically increased precipitation runoff to the system of drainage channels and natural stream channels in the Albuquerque, New Mexico, metropolitan area. Rainfall and runoff data are important for planning and designing future storm-water conveyance channels in newly developing areas. Storm-water quality also is monitored in accordance with the National Pollutant Discharge Elimination System mandated by the U.S. Environmental Protection Agency. The Albuquerque Metropolitan Arroyo Flood Control Authority, the City of Albuquerque, and the U.S. Geological Survey began a cooperative program to collect hydrologic data to assist in assessing the quality and quantity of surface-water resources in the Albuquerque area. This report presents water-quality, streamflow, and rainfall data collected from October 1, 2003, to September 30, 2004 (water year 2004). Also provided is a station analysis for each of the 18 streamflow-gaging sites and 39 rainfall-gaging sites, which includes a description of monitoring equipment, problems associated with data collection during the year, and other information used to compute streamflow discharges or rainfall records. A hydrographic comparison shows the effects that the largest drainage channel in the metropolitan area, the North Floodway Channel, has on total flow in the Rio Grande.

Clean Coal Technology Programs: Program Update 2003 (Volume 1)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-A: Resource description, program history, wells tested, university and company based research, site restoration

Energy Technology Data Exchange (ETDEWEB)

John, C.J.; Maciasz, G.; Harder, B.J.

1998-06-01

The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Geopressured-geothermal resource description; Resource origin and sediment type; Gulf Coast resource extent; Resource estimates; Project history; Authorizing legislation; Program objectives; Perceived constraints; Program activities and structure; Well testing; Program management; Program cost summary; Funding history; Resource characterization; Wells of opportunity; Edna Delcambre No. 1 well; Edna Delcambre well recompletion; Fairfax Foster Sutter No. 2 well; Beulah Simon No. 2 well; P.E. Girouard No. 1 well; Prairie Canal No. 1 well; Crown Zellerbach No. 2 well; Alice C. Plantation No. 2 well; Tenneco Fee N No. 1 well; Pauline Kraft No. 1 well; Saldana well No. 2; G.M. Koelemay well No. 1; Willis Hulin No. 1 well; Investigations of other wells of opportunity; Clovis A. Kennedy No. 1 well; Watkins-Miller No. 1 well; Lucien J. Richard et al No. 1 well; and the C and K-Frank A. Godchaux, III, well No. 1.

Reactor safety research program. A description of current and planned reactor safety research sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research

International Nuclear Information System (INIS)

1975-06-01

The reactor safety research program, sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research, is described in terms of its program objectives, current status, and future plans. Elements of safety research work applicable to water reactors, fast reactors, and gas cooled reactors are presented together with brief descriptions of current and planned test facilities. (U.S.)

Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification. Revision 3, Part 2

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program.

The development of rural area residence based on participatory planning case study: A rural residential area of Pucungrejo village, Magelang through "neighborhood development" program

Science.gov (United States)

KP, R. M. Bambang Setyohadi; Wicaksono, Dimas

2018-03-01

The poverty is one of the prevailing problems in Indonesia until now. Even a change of the era of governance has not succeeded in eradicating the problem of poverty. The program of poverty alleviation program has always been a focus in the budget allocation in all era of leadership in Indonesia. Those programs were strategic because it prepared the foundation of community self-reliance in the form of representative, entrenched and conducive community leadership institutions to develop of social capital of society in the future. Developing an area of the village requires an integrated planning (Grand Design) to figure out the potential and the problems existing in the rural area as well as the integration of the rural area surrounding. In addition, the grand design needs to be synchronized to the more comprehensive spatial plan with a hierarchical structure such as RTBL, RDTRK / RRTRK, RTRK, and RTRW. This rural area management plan can be oriented or refer to the pattern developed from neighborhood Development program which is part of the PNPM Mandiri program. The neighborhood development program is known as residential area development plan whose process involves of the entire community. Therefore, the regional development up to the scale of the environment requires the planning phase. Particularly, spatial planning which emphasizes the efforts to optimize sectorial development targets to be integrated into an integrated development process must be conducted, in addition to taking into consideration the opportunities, potentials and limitations of the resources, the level of interconnection with the central government within the district and between sub-districts and rural areas.

Measurement of the area of venous ulcers using two software programs 1

Science.gov (United States)

Eberhardt, Thaís Dresch; de Lima, Suzinara Beatriz Soares; Lopes, Luis Felipe Dias; Borges, Eline de Lima; Weiller, Teresinha Heck; da Fonseca, Graziele Gorete Portella

2016-01-01

ABSTRACT Objective: to compare the measurement area of venous ulcers using AutoCAD(r) and Image Tool software. Method: this was an assessment of reproducibility tests conducted in a angiology clinic of a university hospital. Data were collected from 21 patients with venous ulcers, in the period from March to July of 2015, using a collection form and photograph of wounds. Five nurses (evaluators) of the hospital skin wound study group participated. The wounds were measured using both software programs. Data were analyzed using intraclass correlation coefficient, concordance correlation coefficient and Bland-Altman analysis. The study met the ethical aspects in accordance with current legislation. Results: the size of ulcers varied widely, however, without significant difference between the measurements; an excellent intraclass and concordance correlation was found between both software programs, which seem to be more accurate when measuring a wound area >10 cm². Conclusion: the use of both software programs is appropriate for measurement of venous ulcers, appearing to be more accurate when used to measure a wound area > 10 cm². PMID:27992028

Cost avoidance techniques through the Fernald controlled area trash segregation program and the RIMIA solid waste reduction program

International Nuclear Information System (INIS)

Menche, C.E.

1997-01-01

The Fernald Environmental Management Project is a Department of Energy owned facility that produced high quality uranium metals for military defense. The Fernald mission has changed from one of production to remediation. Remediation is intended to clean up legacy (primary) waste from past practices. Little opportunity is available to reduce the amount of primary waste. However, there is an opportunity to reduce secondary waste generation, primarily through segregation. Two programs which accomplish this are the Controlled Area Trash Segregation Program and the RIMIA Solid Waste Reduction Program. With these two programs now in place at the FEMP, it has been estimated that a 60% reduction has been achieved in unnecessary clean waste being disposed as Low Level Waste at the Nevada Test Site. The cost savings associated with these programs (currently 79,000 cubic feet, $428,000) could easily run into the millions of dollars based on the upcoming restoration activities to be undertaken. The segregation of non-radiological waste in the radiologically Controlled Area not only establishes a firm commitment to send only low-level radioactive waste to the Nevada Test Site, but also results in substantial cost avoidance

System description of the Basic MRS System for the FY 1990 Systems Integration Program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Basic MRS System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the Office of Civilian Radioactive Waste Management Office (OCRWM). Two specific systems studies initiated in FY 1990, the Reference System Performance Evaluation and the Aggregate Receipt Rate Study, utilize the information in this document. The Basic MRS System is the current OCRWM reference high-level radioactive wastes repository system concept. It is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes. The Basic MRS System includes a storage-only MRS that provides for a limited amount of commercial spent fuel storage capacity prior to acceptance by the geologic repository for disposal. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. The basic MRS system contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, an MRS facility that provides interim storage wastes accepted from the waste generators, a repository facility that packages the wastes and then emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the waste between these major facilities

200 Area Liquid Effluent Facilities -- Quality assurance program plan

International Nuclear Information System (INIS)

Fernandez, L.

1995-01-01

This Quality Assurance Program Plan (QAPP) describes the quality assurance and management controls used by the 200 Area Liquid Effluent Facilities (LEF) to perform its activities in accordance with DOE Order 5700.6C. The 200 Area LEF consists of the following facilities: Effluent Treatment Facility (ETF); Treated Effluent Disposal Facility (TEDF); Liquid Effluent Retention facility (LERF); and Truck Loading Facility -- (Project W291). The intent is to ensure that all activities such as collection of effluents, treatment, concentration of secondary wastes, verification, sampling and disposal of treated effluents and solids related with the LEF operations, conform to established requirements

Deep repository for spent nuclear fuel. Facility description - Layout E. Spiral ramp with one operational area

International Nuclear Information System (INIS)

Pettersson, Stig; Forsgren, Ebbe; Lange, Fritz

2002-04-01

ground. The proposal is based on a hypothetical inland location with a rail link. The report describes a layout with a spiral ramp as access to the deposition area and with a single operational area above ground. The ramp will be used as a transport route for heavy and bulky transports. A shaft, that connects the operational area with the central area of the deposition area, is used for utility systems and for staff transports between the surface and the deposition area. It has been assumed that the deposition areas and the central area are on the same level. The appendix, describing a two level alternative, shows how the underground area could be arranged if the deposition area for regular operation were to be divided into two levels. The facility description concentrates on the situation during regular operation. It also describes the gradual expansion programme, including land requirements and connections to existing infrastructure. The report concludes with some perspective sketches, which give a vision of how the repository might look when ready for operation. This facility description is a translation of the Swedish SKB report R-02-18. It is important to note that the report gives an example of one possible design for the deep repository. Many issues concerning system design, functional solutions, layout and design ought to be investigated further before deciding on the final design

Deep repository for spent nuclear fuel. Facility description - Layout E. Spiral ramp with one operational area

Energy Technology Data Exchange (ETDEWEB)

Pettersson, Stig [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Forsgren, Ebbe [SwedPower AB, Stockholm (Sweden); Lange, Fritz [Lange Art AB, Stockholm (Sweden)

2002-04-01

below ground. The proposal is based on a hypothetical inland location with a rail link. The report describes a layout with a spiral ramp as access to the deposition area and with a single operational area above ground. The ramp will be used as a transport route for heavy and bulky transports. A shaft, that connects the operational area with the central area of the deposition area, is used for utility systems and for staff transports between the surface and the deposition area. It has been assumed that the deposition areas and the central area are on the same level. The appendix, describing a two level alternative, shows how the underground area could be arranged if the deposition area for regular operation were to be divided into two levels. The facility description concentrates on the situation during regular operation. It also describes the gradual expansion programme, including land requirements and connections to existing infrastructure. The report concludes with some perspective sketches, which give a vision of how the repository might look when ready for operation. This facility description is a translation of the Swedish SKB report R-02-18. It is important to note that the report gives an example of one possible design for the deep repository. Many issues concerning system design, functional solutions, layout and design ought to be investigated further before deciding on the final design.

Description of Lutzomyia (Pifanomyia robusta n. sp. (Diptera, Psychodidae, Phlebotominae from Peruvian Equadorean interandean areas

Directory of Open Access Journals (Sweden)

Eunice A. Bianchi Galati

1995-04-01

Full Text Available Description of Lutzomyia robusta, n. sp. (Diptera, Psychodidae, Phlebotominae from interandean areas of Peru and Equador. Lutzomyia robusta, n. sp., probable vector of human bartonellosis and cutaneous leishmaniasis, is described and illustrated. This species presents strong affinity with L. serrana (Damasceno & Arouck, 1949 but they can be distinguished by variance analysis of four male characteristics and only one female characteristic. In the variance analysis, populations of L. serrana, of Amazonian areas of Brazil, Peru and Bolivia, the coast of Equador and other areas of Brazil were studied. The synonymy of Lutzomyia guayasi (Rodriguez and L. serrana was corroborated.Descreve-se Lutzomyia (Pifanomyia robusta, sp.n., provável vetora de bartonelose e leishmaniose tegumentar, de ocorrência em vales interandinos no Peru e Equador e que apresenta estreita afinidade com L. serrana (Damasceno e Arouck. A separação de ambas foi possível, por meio de análise de variância de alguns caracteres do macho e apenas um da fêmea. Na análise de variância, foram estudadas populações de L. serrana da região amazônica do Brasil, Peru e Bolívia; costa do Equador; região atlântica e outras áreas do Brasil. Corrobora-se a sinonímia de Phlebotomus guayasi Rodríguez com L. serrana.

Predictive Models of Duration of Ground Delay Programs in New York Area Airports

Science.gov (United States)

Kulkarni, Deepak

2011-01-01

Initially planned GDP duration often turns out to be an underestimate or an overestimate of the actual GDP duration. This, in turn, results in avoidable airborne or ground delays in the system. Therefore, better models of actual duration have the potential of reducing delays in the system. The overall objective of this study is to develop such models based on logs of GDPs. In a previous report, we described descriptive models of Ground Delay Programs. These models were defined in terms of initial planned duration and in terms of categorical variables. These descriptive models are good at characterizing the historical errors in planned GDP durations. This paper focuses on developing predictive models of GDP duration. Traffic Management Initiatives (TMI) are logged by Air Traffic Control facilities with The National Traffic Management Log (NTML) which is a single system for automated recoding, coordination, and distribution of relevant information about TMIs throughout the National Airspace System. (Brickman, 2004 Yuditsky, 2007) We use 2008-2009 GDP data from the NTML database for the study reported in this paper. NTML information about a GDP includes the initial specification, possibly one or more revisions, and the cancellation. In the next section, we describe general characteristics of Ground Delay Programs. In the third section, we develop models of actual duration. In the fourth section, we compare predictive performance of these models. The final section is a conclusion.

Quantum State Description Complexity (Invited Talk)

OpenAIRE

Vazirani, Umesh V.

2011-01-01

Quantum states generally require exponential sized classical descriptions, but the long conjectured area law provides hope that a large class of natural quantum states can be described succinctly. Recent progress in formally proving the area law is described.

IAEA integrated safeguards instrumentation program (I2SIP)

International Nuclear Information System (INIS)

Arlt, R.; Fortakov, V.; Gaertner, K.J.

1995-01-01

This article is a review of the IAEA integrated safeguards instrumentation program. The historical development of the program is outlined, and current activities are also noted. Brief technical descriptions of certain features are given. It is concluded that the results of this year's efforts in this area will provide significant input and be used to assess the viability of the proposed concepts and to decide on the directions to pursue in the future

An adaptive maneuvering logic computer program for the simulation of one-on-one air-to-air combat. Volume 1: General description

Science.gov (United States)

Burgin, G. H.; Fogel, L. J.; Phelps, J. P.

1975-01-01

A technique for computer simulation of air combat is described. Volume 1 decribes the computer program and its development in general terms. Two versions of the program exist. Both incorporate a logic for selecting and executing air combat maneuvers with performance models of specific fighter aircraft. In the batch processing version the flight paths of two aircraft engaged in interactive aerial combat and controlled by the same logic are computed. The realtime version permits human pilots to fly air-to-air combat against the adaptive maneuvering logic (AML) in Langley Differential Maneuvering Simulator (DMS). Volume 2 consists of a detailed description of the computer programs.

Safety analysis--200 Area Savannah River Site: Separations Area operations Building 211-H Outside Facilities. Supplement 11, Revision 1

Energy Technology Data Exchange (ETDEWEB)

1993-01-01

The H-Area Outside Facilities are located in the 200-H Separations Area and are comprised of a number of processes, utilities, and services that support the separations function. Included are enriched uranium loadout, bulk chemical storage, water handling, acid recovery, general purpose evaporation, and segregated solvent facilities. In addition, services for water, electricity, and steam are provided. This Safety Analysis Report (SAR) documents an analysis of the H-Area Outside Facilities and is one of a series of documents for the Separations Area as specified in the SR Implementation Plan for DOE order 5481.1A. The primary purpose of the analysis was to demonstrate that the facility can be operated without undue risk to onsite or offsite populations, to the environment, and to operating personnel. In this report, risks are defined as the expected frequencies of accidents, multiplied by the resulting radiological consequences in person-rem. Following the summary description of facility and operations is the site evaluation including the unique features of the H-Area Outside Facilities. The facility and process design are described in Chapter 3.0 and a description of operations and their impact is given in Chapter 4.0. The accident analysis in Chapter 5.0 is followed by a list of safety related structures and systems (Chapter 6.0) and a description of the Quality Assurance program (Chapter 7.0). The accident analysis in this report focuses on estimating the risk from accidents as a result of operation of the facilities. The operations were evaluated on the basis of three considerations: potential radiological hazards, potential chemical toxicity hazards, and potential conditions uniquely different from normal industrial practice.

Safety analysis--200 Area Savannah River Site: Separations Area operations Building 211-H Outside Facilities. Supplement 11, Revision 1

International Nuclear Information System (INIS)

1993-01-01

The H-Area Outside Facilities are located in the 200-H Separations Area and are comprised of a number of processes, utilities, and services that support the separations function. Included are enriched uranium loadout, bulk chemical storage, water handling, acid recovery, general purpose evaporation, and segregated solvent facilities. In addition, services for water, electricity, and steam are provided. This Safety Analysis Report (SAR) documents an analysis of the H-Area Outside Facilities and is one of a series of documents for the Separations Area as specified in the SR Implementation Plan for DOE order 5481.1A. The primary purpose of the analysis was to demonstrate that the facility can be operated without undue risk to onsite or offsite populations, to the environment, and to operating personnel. In this report, risks are defined as the expected frequencies of accidents, multiplied by the resulting radiological consequences in person-rem. Following the summary description of facility and operations is the site evaluation including the unique features of the H-Area Outside Facilities. The facility and process design are described in Chapter 3.0 and a description of operations and their impact is given in Chapter 4.0. The accident analysis in Chapter 5.0 is followed by a list of safety related structures and systems (Chapter 6.0) and a description of the Quality Assurance program (Chapter 7.0). The accident analysis in this report focuses on estimating the risk from accidents as a result of operation of the facilities. The operations were evaluated on the basis of three considerations: potential radiological hazards, potential chemical toxicity hazards, and potential conditions uniquely different from normal industrial practice

Hanford Site grundwater protection management program

International Nuclear Information System (INIS)

1989-10-01

Groundwater protection has emerged over the past few years as a national priority that has been promulgated in a variety of environmental regulations at both the state and federal level. In order to effectively coordinate and ensure compliance with applicable regulations, the US Department of Energy (DOE) requires all DOE facilities to prepare separate groundwater protection program descriptions and plans (groundwater activities were formerly included as a subpart of environmental protection programs). This document is for the Hanford Site located in the state of Washington. The DOE Order specifies that the groundwater protection management program cover the following general topical areas: (1) documentation of the groundwater regime, (2) design and implementation of a groundwater monitoring program to support resource management and comply with applicable laws and regulations, (3) a management program for groundwater protection and remediation, (4) a summary and identification of areas that may be contaminated with hazardous waste, (5) strategies for controlling these sources, (6) a remedial action program, and (7) decontamination and decommissioning and related remedial action requirements. 14 refs., 19 figs., 2 tabs

The Development and Application of the RAND Program Classification Tool. The RAND Toolkit, Volume 1

Science.gov (United States)

2014-01-01

service, reference DoD programs related to psycho - logical health and TBI, but the R-PCT can be applied to other content areas or organizations. Table...and provides a high-level description, comparison, or classification of programs. Furthermore, given its simple architecture , the R-PCT can be

Inner-City Energy and Environmental Education Consortium: Inventory of existing programs. Appendix 13.5

Energy Technology Data Exchange (ETDEWEB)

1992-08-21

This is the ``first effort`` to prepare an inventory of existing educational programs, focused primarily on inner-city youth, in operation in Washington, DC, Baltimore, and Philadelphia. The purpose of the inventory is to identify existing programs which could be augmented, adapted, or otherwise strengthened to help fulfil the mission of the Department of Energy-sponsored Inner-City Energy and Environmental Education Consortium, the mission of which is to recruit and retain inner-city youth to pursue careers in energy-related scientific and technical areas and in environmental restoration and waste management. The Consortium does not want to ``reinvent the wheel`` and all of its members need to learn what others are doing. Each of the 30 participating academic institutions was invited to submit as many program descriptions as they wished. Due to the summer holidays, or because they did not believe than they were carrying out programs relevant to the mission of the Consortium, some institutions did not submit any program descriptions. In addition, several industries, governmental agencies, and not-for-profit institutions were invited to submit program descriptions.

Skier and Snowboarder Motivations and Knowledge Related to Voluntary Environmental Programs at an Alpine Ski Area

Science.gov (United States)

Little, Christopher M.; Needham, Mark D.

2011-11-01

Many alpine ski areas have recently adopted voluntary environmental programs (VEPs) such as using recycling, renewable energy, and biofuels to help reduce their environmental impacts. Studies have addressed the performance of these VEPs in mitigating environmental impacts of this industry, but little is known about visitor awareness and perceptions of these programs. This article addresses this knowledge gap by exploring skier and snowboarder knowledge of VEPs at a ski area and the influence of these programs on their motivations to visit this area currently and behavioral intentions to visit again in the future. Data were obtained from an onsite survey at the Mt. Bachelor ski area in Oregon, USA ( n = 429, 89.7% response rate). Few skiers and snowboarders were knowledgeable of VEPs at this area and fewer than 20% were motivated to visit on their current trip because of these programs. Other attributes such as scenery, snow conditions, and access were more important for influencing visitation. Up to 38% of skiers and snowboarders, however, intend to visit this ski area more often if it adopts and promotes more VEPs. Managers can use these results to inform communication and marketing of their environmental programs and performance to visitors. Additional implications for management and future research are discussed.

The AHEC library program and consortia development in California.

Science.gov (United States)

Jensen, M A; Maddalena, B

1986-07-01

A brief history of the first Area Health Education Center (AHEC) Library Program in California is presented, with a description of methodology and results. The goals of this program were to develop and improve hospital library resources and services, to train hospital library personnel, and to promote resource sharing in a medically underserved area. The health sciences library consortium that evolved became a model for the ten other library consortia in the state. Based on AHEC's twelve years' experience with consortia, from 1973 to 1985, recommendations are made as to size, composition, leadership, outside funding, group participation, publicity, and linkages.

Integration of Bilingual Emphasis Program into University Curriculum. Multiple Subjects Credential Program: Hupa, Yurok, Karuk, or Tolowa Emphasis.

Science.gov (United States)

Bennett, Ruth

A description of the American Indian Bilingual Teacher Credential Program offered by Humboldt State University (California) provides background information on the linguistic groups served by the program. Accompanying the program descriptions are lists of lower and upper division requirements, descriptions of competency exam, program schedule,…

Missouri State information handbook: formerly utilized sites remedial action program

International Nuclear Information System (INIS)

1980-01-01

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Missouri. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature chairmen, and a summary of recent relevant legislative action; a description of the organization and structure of local governments affected by remedial action at the St. Louis area sites; a summary of relevant local ordinances and regulations; an identification of relevant public interest groups; a list of radio stations, television stations, and newspapers that provide public information to the St. Louis area or to Jefferson City; and the full text of relevant statutes and regulations

Missouri State information handbook: formerly utilized sites remedial action program

Energy Technology Data Exchange (ETDEWEB)

None

1980-12-31

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Missouri. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature chairmen, and a summary of recent relevant legislative action; a description of the organization and structure of local governments affected by remedial action at the St. Louis area sites; a summary of relevant local ordinances and regulations; an identification of relevant public interest groups; a list of radio stations, television stations, and newspapers that provide public information to the St. Louis area or to Jefferson City; and the full text of relevant statutes and regulations.

Model description. NUDOS: A computer program for assessing the consequences of airborne releases of radionuclides

International Nuclear Information System (INIS)

Poley, A.D.

1996-02-01

NUDOS is a computer program that can be used to evaluate the consequences of airborne releases of radioactive material. The consequences which can be evaluated are individual dose and associated radiological risk, collective dose and the contamination of land. The code is capable of dealing with both continuous (routine) and accidental releases. For accidental releases both deterministic and probabilistic calculations can be performed, and the impact and effectiveness of emergency actions can be evaluated. This report contains a description of the models contained in NUDOS92 and the recommended values for the input parameters of these models. Additionally, a short overview is given of the future model improvement planned for the next NUDOS-version. (orig.)

Baccalaureate Student Nurses' Study Habits Prior to Admission to Nursing Program: A Descriptive Qualitative Study.

Science.gov (United States)

Felicilda-Reynaldo, Rhea Faye D; Cruz, Jonas Preposi; Bigley, Louise; Adams, Kathryn

2017-06-01

Faculty continue to observe students struggling as they adapt their study strategies to learn nursing core content. This study described the study habits of Bachelor of Science in Nursing (BSN) students prior to admission to the program. This study used a descriptive qualitative research design. A purposive sample of 19 BSN students (juniors [n=10] and seniors [n=9]) from a 4-year public Midwestern university were included in this study. Two focus group sessions, using a semi-structured interview guide, were conducted in the spring semester of 2013. The four themes which emerged from the analysis of data were: "I just got it," "I had a lot of time then," "I studied alone" mostly, and "…a little struggle with the sciences." The findings suggest the BSN students did not study much or employed poor study strategies during their years completing general education courses. Academic support is needed by students prior to admission to the nursing program so they can learn effective study skills and modify their study habits for easier adaptation to the rigors of nursing education. Published by Elsevier Ltd.

Technology spin-offs from the magnetic fusion energy program

International Nuclear Information System (INIS)

1982-05-01

A description is given of 138 possible spin-offs from the magnetic fusion program. The spin-offs cover the following areas: (1) superconducting magnets, (2) materials technology, (3) vacuum systems, (4) high frequency and high power rf, (5) electronics, (6) plasma diagnostics, (7) computers, and (8) particle beams

76 FR 31998 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2012

Science.gov (United States)

2011-06-02

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... Underserved Areas under the Federal Employees Health Benefits (FEHB) Program for calendar year 2012. This is... certain FEHB plans who receive covered health services in States with critical shortages of primary care...

75 FR 32972 - Federal Employees Health Benefits Program; Medically Underserved Areas for 2011

Science.gov (United States)

2010-06-10

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program; Medically Underserved... Underserved Areas under the Federal Employees Health Benefits (FEHB) Program for calendar year 2011. This is... certain FEHB plans who receive covered health services in States with critical shortages of primary care...

A biomonitoring program of the coastal area of the Principality of Monaco

International Nuclear Information System (INIS)

Tambutte, S.; Tambutte, E.; Rolland, P.; Van Klaveren, M.C.

1999-01-01

The laboratory of ecotoxicology of the 'Service de l'Environnement de Monaco' has set up a biomonitoring program in three areas of the littoral of the Principality of Monaco. This program belongs to the general monitoring program on the quality of the Environment. At a subregional level, this program is part of the programs of the tripartite agreement 'RAMOGE', between the three countries France, Italy and the Principality of Monaco; the aim of this agreement being to build a pilot zone of fight against pollution in Mediterranean. At an international level, this program goes in the scope of the 'MEDPOL' biomonitoring program intending to establish or to intensify programs for the continuous monitoring of marine pollution in the mediterranean zone. Our biomonitoring program consists in assessing the effects of pollutants on two marine organisms (Dicentrarchus labrax and Mytilus galloprovincialis) by using general and specific stress indices

REBUILD AMERICA PROGRAM SCOPE OF WORK

Energy Technology Data Exchange (ETDEWEB)

Jeffrey Brown; Bruce Exstrum

2004-12-01

This report summarizes the activities carried out by Aspen Systems Corporation in support of the Department of Energy's Rebuild America program during the period from October 9, 1999 to October 31, 2004. These activities were in accordance with the Scope of Work contained in a GSA MOBIS schedule task order issued by the National Energy Technology Laboratory. This report includes descriptions of activities and results in the following areas: deployment/delivery model; program and project results; program representative support activities; technical assistance; web site development and operation; business/strategic partners; and training/workshop activities. The report includes conclusions and recommendations. Five source documents are also provided as appendices.

A Program to Stabilize Nuclear Materials as Managed by the Plutonium Focus Area

International Nuclear Information System (INIS)

Kenley, B.; Scott, B.; Seidel, B.; Knecht, D.; Southworth, F.; Osborne, K.; Chipman, N.; Creque, T.

1999-01-01

This paper describes the program to stabilize nuclear materials, consistent with the Department of Energy Office of Environmental Management (EM) plan, Accelerating Cleanup: Paths to Closure. The program is managed by the Plutonium Stabilization and Disposition Focus Area, which defines and manages technology development programs to stabilize nuclear materials and assure their subsequent safe storage and final disposition. The scope of the Plutonium Stabilization and Disposition Focus Area (PFA) activities includes non-weapons plutonium materials, special isotopes, and other fissile materials. The PFA provides solutions to site-specific and complex wide technology issues associated with plutonium remediation, stabilization, and preparation for disposition. Our paper describes an important programmatic function of the Department of Energy nuclear materials stabilization program, including the tie-in of policy to research needs and funding for the nuclear materials disposition area. The PFA uses a rigorous systems engineering determination of technology needs and gaps, under the guidance of a Technical Advisory Panel, consisting of complex-wide experts. The Research and Development planning provides an example for other waste areas and should be of interest to Research and Development managers. The materials disposition maps developed by the PFA and described in this paper provide an evaluation of research needs, data gaps and subsequent guidance for the development of technologies for nuclear materials disposition. This paper also addresses the PFA prioritization methodology and its ability to forecast actual time to implementation

Farmer education and organization in the Hawaii area-wide fruit fly pest management program

International Nuclear Information System (INIS)

Mau, Ronald F.L.; Sugano, J.S.; Jang, Eric

2003-01-01

A critical component of successful area wide pest management (AWPM) programs are organized, coordinated and comprehensive outreach educational programs. The Hawaii area wide fruit fly pest management (HAW-FLYPM) program's educational program, a part of a USDA AWPM program in Hawaii, utilized the 'logic model' approach to organize, plan, execute and evaluate farmer and community educational programs statewide. The logic model approach was an outcome-driven rather than activity based method that employed a linear sequence that developed relationships between program inputs, outputs and outcomes. This model was utilized extensively to transfer sustainable, science-based technologies to suppress tephritid fruit fly pests. HAW-FLYPM's educational program targeted growers and community door yard growers, three teaching curricula aimed at elementary through high school students, and a statewide awareness program for the pubic at large. Additional key components of the HAW-FLYPM education program was the development of implementation schedules used to track program progress, a comprehensive media matrix developed to ensure educational materials met the needs of target audience groups, and a sustainability calculator to assess the likelihood of program sustainability after the initial five year funding cycle. The model served as a 'blue print' for ensuring program elements were planned, delivered and executed on a timely basis. Utilization of the logic model to organize efforts and manage diverse, multi agency programs such as the HAW-FLYPM program has shown to be a successful method of program advancement and outcome achievement. (author)

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2007-06-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

2007-06-15

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Development of the disposal technology research component of the national uranium tailings program

International Nuclear Information System (INIS)

Melis, L.A.

1983-03-01

The National Technical Planning Group on Uranium Tailings Research, organized by CANMET in 1980, recommended the establishment of a National Uranium Tailings Program to develop research on the long-term abandonment of uranium mine tailings. This report deals with the disposal technology component of this program and attempts to provide recommendations with respect to potential research avenues in this area. A description of uranium tailings in Canada is provided in order to identify the current situation with uranium tailings management. Uranium mining sites described include the Elliot Lake and Bancroft area of Ontario, the northern Saskatchewan properties and the two abandoned sites in the North West Territories. The description of the sites was facilitated by subdividing the tailings into inactive sites, active sites, new tailings sites and areas of tailings in a close-out situation. Methods identified as promising include subsurface disposal, in-situ leaching, prevention of pyrite oxidation and reclamation studies at abandoned sites

DOE-RL Integrated Safety Management System Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions

DOE-RL Integrated Safety Management System Description

CERN Document Server

Shoop, D S

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

77 FR 69651 - Final Fair Market Rents for the Housing Choice Voucher Program for Small Area Fair Market Rent...

Science.gov (United States)

2012-11-20

... the Housing Choice Voucher Program for Small Area Fair Market Rent Demonstration Program Participants... Authorities (PHAs) participating in the Small Area FMR Demonstration. SUMMARY: Section 8(c)(1) of the United... Housing Choice Voucher (HCV) Program for those PHAs selected to participate in the Small Area FMR...

Subsurface conditions description for the S-SX waste management area

International Nuclear Information System (INIS)

WOOD, M.I.

1999-01-01

This document provides a discussion of the subsurface conditions relevant to the occurrence and migration of contaminants in the vadose zone and groundwater underlying the 241-5 and 241-SX tank farms This document provides a concise summary of existing information in support of characterization planning This document includes a description of the available environmental contamination data and a limited qualitative interpretation of these data

Port Hope and area property value protection program: creating stability in the marketplace

International Nuclear Information System (INIS)

Gerestein, B.; Flynn, B.

2006-01-01

The Property Value Protection (PVP) Program, administered by the Low-Level Radioactive Waste Management Office (LLRWMO), functions as an integral part of the Port Hope Area Initiative, a $260M, 10-year project to clean up and safely manage low- level radioactive waste for the long-term in the Port Hope area. The PVP Program was established in March 2001 to compensate owners of residential, commercial or industrial properties in designated parts of the municipalities of Port Hope and Clarington. Compensation is awarded to owners if they realize financial loss on the sale or rental of their property or mortgage renewal difficulties as a result of the Initiative. Key features of the PVP Program include a claim process, an appeal process and the appointment of independent Compensation Officers to hear appeals. (author)

Factors that influence the success of conservation programs in communal property areas in Mexico

Directory of Open Access Journals (Sweden)

Verónica Bunge-Vivier

2017-03-01

Full Text Available More than half of the natural vegetation in Mexico is managed collectively within common property systems. The appropriation and continuity of government programs related to the conservation of land that is communally used is proposed to depend on the level of organization of the communities and the interaction between the local and governmental institutions, as well as the benefits derived from conservation projects. Patterns of what drives the conservation of common natural resources were analyzed in order to propose improvements to conservation policy. Changes in primary and secondary vegetation cover in common and private properties were identified by performing a historical spatial analysis. Questionnaires were used to survey 32 populations of seven states of the Mexican Republic to determine the conservation status of common property resources, as well as the ability of the community to continue conservation activities initially undertaken by government programs. Some 53% of the primary and secondary vegetation in Mexico is found in common property areas, but the change from primary and secondary vegetation to other uses is the same for common and private property. Communities with a high level of conservation of communal areas and with the ability to continue conservation projects were those that had dedicated the areas to recreation and conservation, had stronger community organization and were less marginalized. A recognition of the heterogeneity of the socioeconomic and cultural context of communities with common property is necessary to design governmental conservation programs that achieve long-term conservation. To meet the needs of a region that is both degraded and marginalized, the creation of synergies between programs that combat poverty and programs that promote conservation is needed. In addition, the continuation of payments with public funds for work that preserves or rehabilitates natural areas is needed, thereby

Regulatory research program for 1987/88

International Nuclear Information System (INIS)

1987-01-01

The regulatory research program of Canada's Atomic Energy Control Board (AECB) is intended to augment the AECB's research program beyond the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program covers the following areas: the safety of nuclear facilities, radioactive waste management, health physics, physical security, and the development of regulatory processes. Sixty-seven projects are planned for 1987/88; as well, there are some projects held in reserve in case funding becomes available. This information bulletin contains a list of the projects with a brief description of each

DOE In Situ Remediation Integrated Program

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1993-01-01

The In Situ Remediation Integrated Program (ISRP) supports and manages a balanced portfolio of applied research and development activities in support of DOE environmental restoration and waste management needs. ISRP technologies are being developed in four areas: containment, chemical and physical treatment, in situ bioremediation, and in situ manipulation (including electrokinetics). the focus of containment is to provide mechanisms to stop contaminant migration through the subsurface. In situ bioremediation and chemical and physical treatment both aim to destroy or eliminate contaminants in groundwater and soils. In situ manipulation (ISM) provides mechanisms to access contaminants or introduce treatment agents into the soil, and includes other technologies necessary to support the implementation of ISR methods. Descriptions of each major program area are provided to set the technical context of the ISM subprogram. Typical ISM needs for major areas of in situ remediation research and development are identified

Students' Midprogram Content Area Performance as a Predictor of End-of-Program NCLEX Readiness.

Science.gov (United States)

Brussow, Jennifer A; Dunham, Michelle

2017-12-22

Many programs have implemented end-of-program predictive testing to identify students at risk of NCLEX-RN failure. Unfortunately, for many students, end-of-program testing comes too late. Regression and relative importance analysis were used to explore relationships between 9 content area assessments and an end-of-program assessment shown to be predictive of NCLEX-RN success. Results indicate that scores on assessments for content areas such as medical surgical nursing and care of children are predictive of end-of-program test scores, suggesting that instructors should provide remediation at the first sign of lagging performance.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in anyway or used commercially without permission from the journal.

Forsmark - site descriptive model version 0

International Nuclear Information System (INIS)

2002-10-01

During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

A Mobile Health App-Based Postnatal Educational Program (Home-but not Alone): Descriptive Qualitative Study.

Science.gov (United States)

Shorey, Shefaly; Yang, Yen Yen; Dennis, Cindy-Lee

2018-04-19

The postnatal period poses numerous challenges for new parents. Various educational programs are available to support new parents during this stressful period. However, the usefulness of educational programs must be evaluated to ascertain their credibility. The aim of this descriptive, qualitative study was to explore the views of parents of newborns with regard to the content and delivery of a mobile health (mHealth) app-based postnatal educational program. A qualitative semistructured interview guide was used to collect data from 17 participants who belonged to the intervention group of a randomized controlled trial. The intervention, a 4-week-long access to a mHealth app-based educational program, was evaluated. The interviews were conducted in English and at the participants' homes. Thematic analysis was used to analyze the data. The Consolidated Criteria for Reporting Qualitative Research checklist was used to report the findings. The interviews revealed 4 main themes: (1) positive features of the mHealth app, (2) advice from midwives, (3) experiences gained from using the mHealth app, and (4) recommendations for the future. The participants evaluated the educational program to be a good source of information that was tailored to the local context. The different modes of delivery, including audio and video, accentuated the accessibility of information. The parents evaluated that the facilitator of the featured communication platform, a midwife, provided trustworthy advice. Belongingness to a virtual community beyond the hospital endowed the parents the confidence that they were not alone and were supported by other parents and health care professionals. According to the parents, the mHealth app-based educational program was helpful in supporting a multi-ethnic sample of parents during the postnatal period. This insight indicates that the program could be implemented in a wide community of parents in the postnatal period. The helpfulness of the educational

The great tsunami of 26 December 2004: A description based on tide gauge data from Indian subcontinent and surrounding areas

Digital Repository Service at National Institute of Oceanography (India)

Nagarajan, B.; Suresh, I; Sundar, D.; Sharma, R; Lal, A.K.; Neetu, S.; Shenoi, S.S.C.; Shetye, S.R; Shankar, D.

-1 Earth Planets Space, 58, 211?215, 2006 The Great Tsunami of 26 December 2004: A description based on tide-gauge data from the Indian subcontinent and surrounding areas B. Nagarajan1, I. Suresh2, D. Sundar2, R. Sharma1,A.K.Lal1, S. Neetu2, S. S. C. Shenoi..., I. Suresh, D. Sundar, R. Sharma, A. K. Lal, S. Neetu, S. S. C. Shenoi, S. R. Shetye, and D. Shankar (e-mail: shankar@nio.org) ...

A coherent description of the process of design

DEFF Research Database (Denmark)

Hertz, Kristian Dahl

1992-01-01

, and others. Doing so, a corresponding number of philosophical problems are solved, and the description becomes a coherent theory. The author has shown that it is possible to make a computer program for conceptual modelling based on the theory presented, and the principles of a CAD system including......A description of the creative design process is given based on Empiricism and using the theory of sets on conceptual and subconscious representations of the human mind. Definitions that are more precise are given of a number of common concepts such as association, synthesis, culture, creation, art...... the program and supporting the creative process of the designer is described....

Programming the BBC micro

CERN Document Server

Ferguson, John D; Macari, Louie; Williams, Peter H

1983-01-01

Programming the BBC Micro is a 12-chapter book that begins with a description of the BBC microcomputer, its peripheral, and faults. Subsequent chapters focus on practice in programming, program development, graphics, words, numbers, sound, bits, bytes, and assembly language. The interfacing, file handling, and detailed description of BBC microcomputer are also shown.

NCRP Program Area Committee 5: Environmental Radiation and Radioactive Waste Issues.

Science.gov (United States)

Chen, S Y; Napier, Bruce

2016-02-01

Program Area Committee 5 of the National Council on Radiation Protection and Measurements (NCRP) focuses its activities on environmental radiation and radioactive waste issues. The Committee completed a number of reports in these subject areas, most recently NCRP Report No. 175, Decision Making for Late-Phase Recovery from Major Nuclear or Radiological Incidents. Historically this Committee addressed emerging issues of the nation pertaining to radioactivity or radiation in the environment or radioactive waste issues due either to natural origins or to manmade activities.

Word Processing Job Descriptions and Duties.

Science.gov (United States)

Gajewski-Johnson, Marlyce

In order to develop a word processing career file at Milwaukee Area Technical College, employment managers at 124 Milwaukee-area businesses were asked to provide job descriptions for all word processing positions in the company; skill and knowledge requirements necessary to obtain these positions; employee appraisal forms; wage scales; a list of…

ORNL Solid Waste Storage Area 6 trench photos and geologic descriptions, July 1984-September 1985

International Nuclear Information System (INIS)

Davis, E.C.; Marshall, D.S.; Stansfield, R.G.; Dreier, R.B.

1986-03-01

The Environmental Sciences Division of the Oak Ridge National Laboratory has initiated a photographic and descriptive geologic study of low-level waste trenches opened in Solid Waste Storage Area 6 (SWSA-6). From July 1984 through September 1985, trenches were excavated, geologically described, and photographed before being filled and closed. Only three trenches (Nos. 438, 448, and 465) were excavated and closed before photography could be scheduled. It is recommended that the systematic trench characterization procedure outlined in this report be continued under the direction of ORNL's Operations Division with support from both Environmental Sciences and the Engineering divisions. Publication of such a compilation of trench photos on a yearly basis will serve not only as a part of Department of Energy trench documentation requirements but also as a component of a SWSA-6 geologic data base being developed for current research and development activities. 2 refs., 38 figs

1995 Baseline solid waste management system description

International Nuclear Information System (INIS)

Anderson, G.S.; Konynenbelt, H.S.

1995-09-01

This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

Forsmark - site descriptive model version 0

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

A program to compute the area of an irregular polygon on a spheroidal surface

Digital Repository Service at National Institute of Oceanography (India)

Sivakholundu, K.M.; Prabaharan, N.

(MATLAB). Short Note824 lar shapes. The analytical integrations were carried out with the software package MATLAB on a SUN workstation. The comparisons were made to check: 1. The eC128ect of varying strip width for integration. 2. Variation of accuracy... this program can be used to calculate the area on the spheroidal surface for irregular shapes without losing accuracy. REFERENCES Bomford, G. (1977) Geodesy. Oxford University Press, 731 pp. Larkin, B. J. (1988) A FORTRAN 77 program to calcu- late areas...

Energy research program 99. Program for expansion of the Danish energy research and development in the period 1999-2001

International Nuclear Information System (INIS)

2000-08-01

The present 'Energy research program 99' contains descriptions of projects under The Energy Research Programme (EFP) supported by the Danish Energy Agency. The research programme covers the areas Fuel oils and natural gas, biomass, production and distribution of electric power and heating, wind energy, energy consumption in buildings, solar energy, energy conservation, fuel cells, super conductors, industrial processes and international co-operation. The manuscript is based on print-outs of the Danish input from the database Nordic Energy Index (NEI). The descriptions give project titles, summary descriptions of aims, methods etc., names, addresses, telephone and tele fax numbers of institutions etc. responsible for the projects, names of project leaders, of other involved firms, institutes or institutions, and details of the total budget and the financing of the energy research projects. (EHS)

Estimate of the area occupied by reforestation programs in Rio de Janeiro state

Directory of Open Access Journals (Sweden)

Hugo Barbosa Amorim

2012-03-01

Full Text Available This study was based on a preliminary survey and inventory of existing reforestation programs in Rio de Janeiro state, through geoprocessing techniques and collection of field data. The reforested area was found to occupy 18,426.96 ha, which amounts to 0.42% of the territory of the state. Much of reforestation programs consists of eucalyptus (98%, followed by pine plantations (0.8%, and the remainder is distributed among 10 other species. The Médio Paraíba region was found to contribute the most to the reforested area of the state (46.6%. The estimated volume of eucalyptus timber was nearly two million cubic meters. This study helped crystallize the ongoing perception among those militating in the forestry sector of Rio de Janeiro state that the planted area and stock of reforestation timber is still incipient in the state.

Missouri state information handbook formerly utilized sites remedial action program

International Nuclear Information System (INIS)

1980-01-01

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and rgulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the State of Missouri. It contains: a description of the state executive branch structure; a summary of relevant state statutes and regulations; a description of the structure of the state legislature, identification of the officers and committee chairmen, and a summary of recent relevant legislative action; a description of the organization and structure of local governments affected by remedial action at the St. Louis area sites; a summary of relevant local ordinances and regulations; an identification of relevant public interest groups; a list of radio stations, television stations and newspapers that provide public information to the St. Louis area or to Jefferson City; and the full text of relevant statutes and regulations

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

Science.gov (United States)

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

Prolog as description and implementation language in computer science teaching

DEFF Research Database (Denmark)

Christiansen, Henning

population with uneven mathematical backgrounds. % Definitional interpreters, compilers, and other models of computation are defined in a systematic way as Prolog programs, and as a result, formal descriptions become running prototypes that can be tested and modified by the students. These programs can......Prolog is a powerful pedagogical instrument for theoretical elements of computer science when used as combined description language and experimentation tool. A teaching methodology based on this principle has been developed and successfully applied in a context with a heterogeneous student...

Involvement of the US Department of Defense in Civilian Assistance, Part I: a quantitative description of the projects funded by the Overseas Humanitarian, Disaster, and Civic Aid Program.

Science.gov (United States)

Bourdeaux, Margaret Ellis; Lawry, Lynn; Bonventre, Eugene V; Burkle, Frederick M

2010-03-01

To review the history and goals of the US Department of Defense's largest civilian assistance program, the Overseas Humanitarian, Disaster and Civic Aid Program and to describe the number, geographic regions, years, key words, countries, and types of projects carried out under this program since 2001. Using the program's central database, we reviewed all approved projects since 2001 and tabulated them by year, combatant command, country, and key word. We also reviewed the project descriptions of projects funded between January 1, 2006, and February 9, 2008, and examined how their activities varied by combatant command and year. Of the 5395 projects in the database, 2097 were funded. Projects took place in more than 90 countries, with Southern, Pacific, and Africa Command hosting the greatest number. The most common types of projects were school, health, disaster response, and water infrastructure construction, and disaster-response training. The "global war on terror" was the key word most frequently tagged to project descriptions. Project descriptions lacked stated goals as well as implementation and coordination strategies with potential partners, and did not report outcome or impact indicators. The geographic reach of the program is vast and projects take place in a wide variety of public sectors. Yet their security and civilian assistance value remains unclear given the lack of stated project goals, implementation strategies, or measures of effectiveness. To facilitate transparency and policy discussion, we recommend project proposals include hypotheses as to how they will enhance US security, their relevance to the public sector they address, and outcome and impact indicators that can assess their value and effectiveness.

Input description for BIOPATH

International Nuclear Information System (INIS)

Marklund, J.E.; Bergstroem, U.; Edlund, O.

1980-01-01

The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

Management control system description

Energy Technology Data Exchange (ETDEWEB)

Bence, P. J.

1990-10-01

This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

Port Hope and area property value protection program: creating stability in the marketplace

International Nuclear Information System (INIS)

Zelmer, R.

2003-01-01

The Property Value Protection (PVP) Program offers an innovative approach to address the risk of individual property value loss resulting from the cleanup and long-term management of low level radioactive waste in the Port Hope area. In its first year of operation, the program has created stability in the marketplace and provided the communities' property owners with the assurance that their investment in their homes and properties will be protected. The PVP Program is part of the Port Hope Area Initiative (the Initiative), encompassing the Port Hope Project for the cleanup of low-level radioactive waste and the development of two long term, low-level radioactive waste management facilities in the Municipality of Port Hope, Ontario. Canada, and the Port Granby Project involving the development of along-term, low-level radioactive waste management facility near Port Granby in the neighbouring Municipality of Clarington. Ontario, Canada. (author)

Site descriptive modeling as a part of site characterization in Sweden - Concluding the surface based investigations

International Nuclear Information System (INIS)

Andersson, Johan; Winberg, Anders; Skagius, Kristina; Stroem, Anders; Lindborg, Tobias

2007-01-01

The Swedish Nuclear Fuel and Waste Management Co., SKB, is currently finalizing its surface based site investigations for the final repository for spent nuclear fuel in the municipalities of Oestharmnar (the Forsmark area) and Oskarshamn (the Simpevar/Laxemar area). The investigation data are assessed into a Site Descriptive Model, constituting a synthesis of geology, rock mechanics, thermal properties, hydrogeology, hydro-geochemistry, transport properties and a surface system description. Site data constitute a wide range of different measurement results. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modeling. The three-dimensional modeling (i.e. estimating the distribution of parameter values in space) is made in a sequence where the geometrical framework is taken from the geological models and in turn used by the rock mechanics, thermal and hydrogeological modeling. These disciplines in turn are partly interrelated, and also provide feedback to the geological modeling, especially if the geological description appears unreasonable when assessed together with the other data. Procedures for assessing the uncertainties and the confidence in the modeling have been developed during the course of the site modeling. These assessments also provide key input to the completion of the site investigation program. (authors)

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

International Nuclear Information System (INIS)

1980-06-01

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates

NCRP Program Area Committee 7: Radiation Education, Risk Communication, Outreach, and Policy.

Science.gov (United States)

Becker, S M; Locke, P A

2016-02-01

Recognizing the central importance of effective communication, education, and policy across all of the domains of radiation safety and radiation protection, the National Council on Radiation Protection and Measurements (NCRP) established a new committee in 2013. Program Area Committee 7 (PAC 7) was created to develop projects and provide guidance on "Radiation Education, Risk Communication, Outreach, and Policy." After identifying individuals with relevant expertise who were willing to serve, the Committee held its inaugural meeting in 2014. In 2015, the Committee increased its membership and began carrying out an expanded program of activities. One area of activity has involved providing input and feedback on risk communication issues to NCRP and other agencies. Another area of work has involved liaising with other NCRP committees (e.g., Council Committee 1 and PAC 3) to help incorporate psychosocial and risk communication issues into projects. Future efforts of NCRP's newest PAC are expected to include the development of authoritative reports and commentaries dealing with critical issues and challenges in radiation risk communication, education, and policy.

Scripps Sediment Description File- OCSEAP Portion

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

200 area liquid effluent facility quality assurance program plan. Revision 1

International Nuclear Information System (INIS)

Sullivan, N.J.

1995-01-01

Direct revision of Supporting Document WHC-SD-LEF-QAPP-001, Rev. 0. 200 Area Liquid Effluent Facilities Quality Assurance Program Plan. Incorporates changes to references in tables. Revises test to incorporate WHC-SD-LEF-CSCM-001, Computer Software Configuration Management Plan for 200 East/West Liquid Effluent Facilities

Materials balance area Custodian Performance Evaluation Program at PNL

International Nuclear Information System (INIS)

Dickman, D.A.

1991-07-01

The material balance area (MBA) custodian has primary responsibility for control and accountability of nuclear material within an MBA. In this role, the custodian operates as an extension of the facility material control and accountability (MC ampersand A) organization. To effectively meet administrative requirements and protection needs, the custodian must be fully trained in all aspects of MC ampersand A related to the MBA, and custodian performance must be periodically evaluated. DOE Policy requires that each facility provide for a program which assures that each facility provide for a program which assures that personnel performing MC ampersand A functions are (1) trained and/or qualified to perform their duties and responsibilities and (2) knowledgeable of requirements and procedures related to their functions. The MBA Custodian Performance Evaluation Program at PNL uses a variety of assessment techniques to meet this goal, including internal and independent MBA audits, periodic custodian testing, conduct of limited scope performance tests, daily monitoring of MC ampersand A documentation, and reviewing custodian performance during physical inventories. The data collected from these sources is analyzed and incorporated into an annual custodian performance evaluation document, given to each custodian and line management. Development of this program has resulted in significantly improved custodian performance and a marked decrease in finding and observations identified during MBA audits

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

Science.gov (United States)

Colantonio, A

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subjects, setting, type of intervention, format), (b) evaluation design (research design, variables measured, operational methods), and (c) program outcomes. Results indicate numerous methodological and conceptual weaknesses and issues. These weaknesses included lack of controlled research designs and short time lags between pre- and post-test measures. Other problems identified are missing information regarding subjects, type of intervention, how variables are measured (operational methods), and reliability and validity of evaluation instruments. Due to the aforementioned weaknesses, positive outcomes could not be supported. Recommendations are made for future EAP evaluations.

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program.

Data report: Jean Lake Area, Nevada. National Uranium Resource Evaluation Program

International Nuclear Information System (INIS)

Cook, J.R.

1982-05-01

This report presents the results of detailed sampling of soils, rocks, and dry lake bed material from the area of Jean Dry Lake in southern Nevada. The study area is in the Kingman 1 0 x 2 0 quadrangle of the National Topographic Map Series. Samples were collected from 1000 sites. The target density of sampling was 16 sites per square mile in the lake bed and four sites per square mile for soil samples. Neutron activation analyses are presented for uranium and 16 other elements. Scintillometer readings are reported for each site. Analytical data and scintillometer measurements are presented in tables. Statistical summaries and a brief description of the results are given. Data from the sites (on microfiche in pocket) include; (1) elemental analyses (U, Th, Hf, Al, Ce, Dy, Eu, Fe, La, Lu, Mn, Sc, Sm, Na, Ti, and V); and (2) scintillometer readings. To make the data available for public use without further delay, this report is being issued without the normal technical and copy editing

A Survey of Graduate Training Programs and Coursework in Forensic Psychology

Science.gov (United States)

Burl, Jeffrey; Shah, Sanjay; Filone, Sarah; Foster, Elizabeth; DeMatteo, David

2012-01-01

An increasing number of graduate programs are available to students interested in the study of forensic psychology. The growth of forensic training opportunities is reflective of the wider development of forensic psychology as a discrete specialty area. An Internet-based survey was conducted to provide descriptive information to academic advisors…

Repository for spent nuclear fuel. Preliminary construction description - layout D Oskarshamn the Simpevarp area; Slutfoervar foer anvaent kaernbraensle. Preliminaer anlaeggningsbeskrivning - layout D. Oskarshamn, delomraade Simpevarp

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-02-15

This report presents the preliminary design of a repository located in the Simpevarp area. The description has been disposed so as to deal primarily with the site dependent layouts for the above- and underground constructions. The report is disposed as follows: c1 gives the background and some basic information. Chapter 2 presents the demands and necessary conditions that take precedence when adapting the plant to the local conditions, construction, operation and closure. Chapter 3 is a general description of the area, its infrastructure and the specific sites that have been studied. Chapter 4-5 describe the design of the plant for the two chosen sites. Chapter 6 gives a review of data for the plant, and Chapter 7 'References' is the last part of the main document. The appendices A-I give brief information on the general, non-site specific, parts of the plant, e.g. buildings, life cycle, system, operation and organization.

Rock mechanics site descriptive model-theoretical approach. Preliminary site description Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Fredriksson, Anders; Olofsson, Isabelle [Golder Associates AB, Uppsala (Sweden)

2005-12-15

The present report summarises the theoretical approach to estimate the mechanical properties of the rock mass in relation to the Preliminary Site Descriptive Modelling, version 1.2 Forsmark. The theoretical approach is based on a discrete fracture network (DFN) description of the fracture system in the rock mass and on the results of mechanical testing of intact rock and on rock fractures. To estimate the mechanical properties of the rock mass a load test on a rock block with fractures is simulated with the numerical code 3DEC. The location and size of the fractures are given by DFN-realisations. The rock block was loaded in plain strain condition. From the calculated relationship between stresses and deformations the mechanical properties of the rock mass were determined. The influence of the geometrical properties of the fracture system on the mechanical properties of the rock mass was analysed by loading 20 blocks based on different DFN-realisations. The material properties of the intact rock and the fractures were kept constant. The properties are set equal to the mean value of each measured material property. The influence of the variation of the properties of the intact rock and variation of the mechanical properties of the fractures are estimated by analysing numerical load tests on one specific block (one DFN-realisation) with combinations of properties for intact rock and fractures. Each parameter varies from its lowest values to its highest values while the rest of the parameters are held constant, equal to the mean value. The resulting distribution was expressed as a variation around the value determined with mean values on all parameters. To estimate the resulting distribution of the mechanical properties of the rock mass a Monte-Carlo simulation was performed by generating values from the two distributions independent of each other. The two values were added and the statistical properties of the resulting distribution were determined.

Rock mechanics site descriptive model-theoretical approach. Preliminary site description Forsmark area - version 1.2

International Nuclear Information System (INIS)

Fredriksson, Anders; Olofsson, Isabelle

2005-12-01

The present report summarises the theoretical approach to estimate the mechanical properties of the rock mass in relation to the Preliminary Site Descriptive Modelling, version 1.2 Forsmark. The theoretical approach is based on a discrete fracture network (DFN) description of the fracture system in the rock mass and on the results of mechanical testing of intact rock and on rock fractures. To estimate the mechanical properties of the rock mass a load test on a rock block with fractures is simulated with the numerical code 3DEC. The location and size of the fractures are given by DFN-realisations. The rock block was loaded in plain strain condition. From the calculated relationship between stresses and deformations the mechanical properties of the rock mass were determined. The influence of the geometrical properties of the fracture system on the mechanical properties of the rock mass was analysed by loading 20 blocks based on different DFN-realisations. The material properties of the intact rock and the fractures were kept constant. The properties are set equal to the mean value of each measured material property. The influence of the variation of the properties of the intact rock and variation of the mechanical properties of the fractures are estimated by analysing numerical load tests on one specific block (one DFN-realisation) with combinations of properties for intact rock and fractures. Each parameter varies from its lowest values to its highest values while the rest of the parameters are held constant, equal to the mean value. The resulting distribution was expressed as a variation around the value determined with mean values on all parameters. To estimate the resulting distribution of the mechanical properties of the rock mass a Monte-Carlo simulation was performed by generating values from the two distributions independent of each other. The two values were added and the statistical properties of the resulting distribution were determined

Quality assurance program description. Topical report SDQAPD-1

International Nuclear Information System (INIS)

1975-01-01

The topical report presented describes the SDG and E QA Program that is applied to the design, procurement, construction, and preoperational testing of nuclear power plants. The QA plan describes the SDG and E organizational structure for quality assurance; identifies the functions, duties, and responsibilities of key departments and individuals; describes interrelationships and interfaces among internal groups and external organizations; delineates program requirements, and prescribes methods of implementation. SDG and E Procedures and Directives provide detailed direction for accomplishment of program requirements in consonance with the methods specified in the QA Plan

Summary description of the Fast Flux Test Facility

International Nuclear Information System (INIS)

Cabell, C.P.

1980-12-01

This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like

Quality Assurance Program Plan (QAPP) Waste Management Project

Energy Technology Data Exchange (ETDEWEB)

VOLKMAN, D.D.

1999-10-27

This document is the Quality Assurance Program Plan (QAPP) for Waste Management Federal Services of Hanford, Inc. (WMH), that implements the requirements of the Project Hanford Management Contract (PHMC), HNF-MP-599, Project Hanford Quality Assurance Program Description (QAPD) document, and the Hanford Federal Facility Agreement with Consent Order (Tri-Party Agreement), Sections 6.5 and 7.8. WHM is responsible for the treatment, storage, and disposal of liquid and solid wastes generated at the Hanford Site as well as those wastes received from other US Department of Energy (DOE) and non-DOE sites. WMH operations include the Low-Level Burial Grounds, Central Waste Complex (a mixed-waste storage complex), a nonradioactive dangerous waste storage facility, the Transuranic Storage Facility, T Plant, Waste Receiving and Processing Facility, 200 Area Liquid Effluent Facility, 200 Area Treated Effluent Disposal Facility, the Liquid Effluent Retention Facility, the 242-A Evaporator, 300 Area Treatment Effluent Disposal Facility, the 340 Facility (a radioactive liquid waste handling facility), 222-S Laboratory, the Waste Sampling and Characterization Facility, and the Hanford TRU Waste Program.

Documentation of a Regional Aquifer Simulation Model RAQSIM, and a description of support programs applied in the Twin Platte - Middle Republican Study Area, Nebraska

Science.gov (United States)

Cady, R.E.; Peckenpaugh, J.M.

1985-01-01

RAQSIM, a generalized flow model of a groundwater system using finite-element methods, is documented to explain how it works and to demonstrate that it gives valid results. Three support programs that are used to compute recharge and discharge data required as input to RAQSIM are described. RAQSIM was developed to solve transient, two-dimensional, regional groundwater flow problems with isotropic or anisotropic conductance. The model can also simulate radially-symmetric flow to a well and steady-state flow. The mathematical basis, program structure, data input and output procedures, organization of data sets, and program features and options of RAQSIM are discussed. An example , containing listings of data and results and illustrating RAQSIM 's capabilities, is discussed in detail. Two test problems also are discussed comparing RAQSIM 's results with analytical procedures. The first support program described, the PET Program, uses solar radiation and other climatic data in the Jensen-Haise method to compute potential evapotranspiration. The second support program, the Soil-Water Program, uses output from the PET Program, soil characteristics, and the ratio of potential to actual evapotranspiration for each crop to compute infiltration, storage, and removal of water from the soil zone. The third program, the Recharge-Discharge Program, uses output from the Soil-Water Program together with other data to compute recharge and discharge from the groundwater flow system. For each support program, a program listing and examples of the data and results for the Twin Platte-Middle Republican study are provided. In addition, a brief discussion on how each program operates and on procedures for running and modifying these programs are presented. (Author 's abstract)

Groundwater monitoring program evaluation For A/M Area, Savannah River Site

International Nuclear Information System (INIS)

Hiergesell, R.A.; Bollinger, J.S.

1996-01-01

This investigation was undertaken with the primary purpose of assessing the groundwater monitoring program within the A/M Area to identify ways in which the monitoring program could be improved. The task was difficult due to the large number of wells located within the A/M Area and the huge database of analytical data. It was recognized early in this investigation that one of the key tasks was to develop a way to gain access to the groundwater databases so that recommendations could be made. To achieve this, geographic information systems (GIS) technology was used to extract pertinent groundwater quality information from the Geochemical Information Management System (GIMS) groundwater database and display the extracted information spatially. GIS technology was also used to determine the location of well screen and annular material zones within the A/M Area hydrostratigraphy and to identify wells that may breach confining units. Recommendations developed from this study address: (1) wells that may not be providing reliable data but continue to be routinely sampled (2) wells that may be inappropriately located but continue to be routinely sampled and (3) further work that should be undertaken, including well development, evaluation of wells that may be breaching confining units, and development of an automated link to GIMS using GIS so that GIMS data can easily be accessed and displayed geographically

ACTIV - a program for automatic processing of gamma-ray spectra

International Nuclear Information System (INIS)

Zlokazov, V.B.

1982-01-01

Program ACTIV is intended for precise analysis of γ-rays and X-ray spectra and allows the user to carry out the full cycle of automatic processing of a series of spectra, i.e. calibration, automatic peak search, determination of peak positions and areas, identification of the radioisotopes and the transformation of the areas found into masses of isotopes in the irradiated sample. ACTIV uses a complex mathematical technique and is oriented mainly to large computers, but using overlaid loading, it can be run also on small computers like the PDP 11/70. Compared with other similar programs, ACTIV has some advantages in accuracy of peak shape description and in the reliability of the peak search and its least-square analysis. The program can be used for the purpose of activation analysis. The program can analyze spectra with poor statistics and with broad and narrow peaks. (orig.)

Description of the RZV and RZF programs

International Nuclear Information System (INIS)

Raevskaya, V.E.; Torlin, B.Z.

1980-01-01

An instruction for running the P3B and P3F programs intended for an implementation of a one-group calculation of the neutron field in a polycell with multizone ring blocks in the P 3 approximation. The program is written in the FORTRAN language for the BESM-6 computer. Time for the calculation of one variant constitutes about 20 s for a simple cell and for double lattices for uniform blocks and 40 s - for double lattices from 30-zone blocks. 4 minutes is the maximum time required for the calculation of the 8x8 polycell consisting from 20 nonequivalent 30-zone blocks of 20 kinds

PARTISIPASI SEMU PEREMPUAN MISKIN DALAM PROGRAM PEMBERDAYAAN MASYARAKAT

Directory of Open Access Journals (Sweden)

Ikhsan Muharma Putra

2015-06-01

Full Text Available The background of this study is the lack of active participation of the poor women in the community empowerment program. This participation is especially on empowerment program promoted by the National Program for Community Empowerment in Rural Areas. Social development calls for changes in community conditions towards independence. His true empowerment program aimed at building communities, especially the poor women to be able to develop networking capabilities and capital in order to improve their welfare. This study used qualitative method and descriptive analysis. This study shows that community participation in the national community empowerment program is still apparent. These results conclude that there is a dominanation of certain groups in the decision-making in the participatory development process. As the result, poor women’s participation turned out to be false.

Hydrologic Resources Management Program and Underground Test Area Project FY2005 Progress Report

International Nuclear Information System (INIS)

Eaton, G F; Genetti, V; Hu, Q; Hudson, G B; Kersting, A B; Lindvall, R E; Moran, J E; Nimz, G J; Ramon, E C; Rose, T P; Shuller, L; Williams, R W; Zavarin, M; Zhao, P

2007-01-01

This report describes FY 2005 technical studies conducted by the Chemical Biology and Nuclear Science Division (CBND) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area Project (UGTA). These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work is directed toward the responsible management of the natural resources at the Nevada Test Site (NTS), enabling its continued use as a staging area for strategic operations in support of national security. UGTA-funded work emphasizes the development of an integrated set of groundwater flow and contaminant transport models to predict the extent of radionuclide migration from underground nuclear testing areas at the NTS. The report is organized on a topical basis and contains five chapters that highlight technical work products produced by CBND. However, it is important to recognize that most of this work involves collaborative partnerships with the other HRMP and UGTA contract organizations. These groups include the Energy and Environment Directorate at LLNL (LLNL-E and E), Los Alamos National Laboratory (LANL), the Desert Research Institute (DRI), the U.S. Geological Survey (USGS), Stoller-Navarro Joint Venture (SNJV), and Bechtel Nevada (BN)

Title I of the Higher Education Act of 1965: Evaluation of the Present Program: Recommendations for the Future.

Science.gov (United States)

Whipple, James B.

In this document, which points out weaknesses in evaluation procedures and offers a new approach to the subject, it is suggested that in the area of the United States studied, the Title 1 program is drifting without direction, leadership, or system. This makes evaluation impossible. Evaluation is sometimes a description of a program and often…

Report on architecture description for the INFLO prototype.

Science.gov (United States)

2014-01-01

This report documents the Architecture Description for the implementation of the Intelligent Network Flow Optimization : (INFLO) Prototype bundle within the Dynamic Mobility Applications (DMA) portion of the Connected Vehicle Program. The : intent is...

Remediation plan for contaminated areas by naturally occurring radioactivity materials in Syrian petroleum company oil fields

International Nuclear Information System (INIS)

Shwekani, R.; Al-Masri, M.S.; Awad, I.

2005-08-01

The present report contains a detailed plan for remediation of areas contaminated with naturally occurring radioactive materials in the Syrian petroleum company oil fields. This plan includes a description of the contaminated areas and the procedures that will be followed before and during the execution of the project in addition to the final radiation surveys according to the Syrian regulations. In addition, responsibilities of the main personnel who will carry out the work have been defined and the future monitoring program of the remediated areas was determined. (author)

Remediation plan for contaminated areas by naturally occurring radioactivity materials in Syrian Petroleum Company oil fields

International Nuclear Information System (INIS)

Shweikani, R.; Al-Masri, M. S.; Awad, I.

2006-01-01

The present report contains a detailed plan for remediation of areas contaminated with naturally occurring radioactive materials in the syrian Petroleum Company Oil fields. This plan includes a description of the contaminated areas and the procedures that will be followed before and during the execution of the project in addition to the final radiation surveys according to the Syrian regulations. In addition, responsibilities of the main personnel who will carry out the work have been defined and the future monitoring program of the remediated areas was determined. (author)

Simpevarp - site descriptive model version 0

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-11-01

During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

Environmental ALARA Program at the Savannah River Site

International Nuclear Information System (INIS)

Jannik, G.T.

1993-01-01

The Savannah River Site (SRS) follows the ALARA (As Low As Reasonably Achievable) philosophy of keeping radiation doses to the general public as low as practical by minimizing radioactive releases to the environment. SRS accomplishes this goal by establishing challenging sitewide and area-specific Environmental ALARA Release Guides and trending radioactive releases against these guides on a monthly basis. The SRS Environmental ALARA Program, mandated by DOE Order 5400.5, is a dose-based program that has gone through many changes and improvements in recent years. A description of the SRS Environmental ALARA Program and its performance is presented in this paper. Recent SRS studies of the ''Zero Release'' option also are described

Energy research program 80

International Nuclear Information System (INIS)

1980-01-01

The energy research program 80 contains an extension of the activities for the period 1980-82 within a budget of 100 mio.kr., that are a part of the goverment's employment plan for 1980. The research program is based on a number of project proposals, that have been collected, analysed, and supplemented in October-November 1979. This report consists of two parts. Part 1: a survey of the program, with a brief description of the background, principles, organization and financing. Part 2: Detailed description of the different research programs. (LN)

Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)

Energy Technology Data Exchange (ETDEWEB)

SINGH, G.

2000-10-17

This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

Isochronous cyclotron closed equilibrium orbit calculation program description

International Nuclear Information System (INIS)

Kiyan, I.N.; Vorozhtsov, S.B.; Tarashkevich, R.

2003-01-01

The Equilibrium Orbit Research Program - EORP, written in C++ with the use of Visual C++ is described. The program is intended for the calculation of the particle rotation frequency and particle kinetic energy in the closed equilibrium orbits of an isochronous cyclotron, where the closed equilibrium orbits are described through the radius and particle momentum angle: r eo (θ) and φ p (θ). The program algorithm was developed on the basis of articles, lecture notes and original analytic calculations. The results of calculations by the EORP were checked and confirmed by using the results of calculations by the numerical methods. The discrepancies between the EORP results and the numerical method results for the calculations of the particle rotation frequency and particle kinetic energy are within the limits of ±1·10 -4 . The EORP results and the numerical method results for the calculations of r eo (θ) and φ p (θ) practically coincide. All this proves the accuracy of calculations by the EORP for the isochronous cyclotrons with the azimuthally varied fields. As is evident from the results of calculations, the program can be used for the calculations of both straight - sector and spiral-sector isochronous cyclotrons. (author)

Office of Educational Programs 2009 Summer Internship Symposium and Poster Session

Energy Technology Data Exchange (ETDEWEB)

White,K.; Morris, M.; Osiecki, C.; Blackburn, N.

2009-08-06

Brookhaven National Laboratory offers college and pre-college faculty and students many opportunities to participate in Laboratory educational programs. The programs administered by the Office of Educational Programs are primarily funded by the U.S. Department of Energy, Brookhaven Science Associates, and other federal and non-federal agencies. Faculty and student research participation is welcomed in physical and life sciences, computer science and engineering, as well as in a variety of applied research areas relating to alternative energy, conservation, environmental technology, and national security. Visit our website at http://www.bnl.gov/education for application deadlines and more details. Following is a description of the programs managed by the Office of Educational Programs.

[Evaluation of nutritional status of school-age children after implementation of "Nutrition Improvement Program" in rural area in Hunan, China].

Science.gov (United States)

Deng, Zhu-Juan; Mao, Guang-Xu; Wang, Yu-Jun; Liu, Li; Chen, Yan

2016-09-01

To investigate the nutritional status of school-age children in rural area in Hunan, China from 2012 to 2015 and to evaluate the effectiveness of the "Nutrition Improvement Program for Compulsory Education Students in Rural Area" (hereinafter referred to as "Nutrition Improvement Program"). The nutritional status of school-age children aged 6-14 years was evaluated after the implementation of the "Nutrition Improvement Program" and the changing trend of the children's nutritional status was analyzed. The statistical analysis was performed on the monitoring data of the school-age children aged 6-14 years in rural area in Hunan, China from 2012 to 2015, which came from "The Nutrition and Health Status Monitoring and Evaluation System of Nutrition Improvement Program for Compulsory Education Students in Rural Area". In 2015, female students aged 6-7 years in rural area in Hunan, China had a significantly greater body length than the rural average in China (PNutrition Improvement Program", the prevalence rate of growth retardation decreased (PNutrition Improvement Program" has achieved some success, but the nutritional status of school-age children has not improved significantly. Overweight/obesity and malnutrition are still present. Therefore, to promote the nutritional status of school-age children it is recommended to improve the measures for the "Nutrition Improvement Program".

The Role of Values, Moral Norms, and Descriptive Norms in Building Occupant Responses to an Energy-Efficiency Pilot Program and to Framing of Related Messages

Science.gov (United States)

Arpan, Laura M.; Barooah, Prabir; Subramany, Rahul

2015-01-01

This study examined building occupants' responses associated with an occupant-based energy-efficiency pilot in a university building. The influence of occupants' values and norms as well as effects of two educational message frames (descriptive vs. moral norms cues) on program support were tested. Occupants' personal moral norm to conserve energy…

TASAC a computer program for thermal analysis of severe accident conditions. Version 3/01, Dec 1991. Model description and user's guide

International Nuclear Information System (INIS)

Stempniewicz, M.; Marks, P.; Salwa, K.

1992-06-01

TASAC (Thermal Analysis of Severe Accident Conditions) is computer code developed in the Institute of Atomic Energy written in FORTRAN 77 for the digital computer analysis of PWR rod bundle behaviour during severe accident conditions. The code has the ability to model an early stage of core degradation including heat transfer inside the rods, convective and radiative heat exchange as well as cladding interactions with coolant and fuel, hydrogen generation, melting, relocations and refreezing of fuel rod materials with dissolution of UO 2 and ZrO 2 in liquid phase. The code was applied for the simulation of International Standard Problem number 28, performed on PHEBUS test facility. This report contains the program physical models description, detailed description of input data requirements and results of code verification. The main directions for future TASAC code development are formulated. (author). 20 refs, 39 figs, 4 tabs

Radioactive Waste Management Program Activities in Croatia

International Nuclear Information System (INIS)

Matanic, R.

2000-01-01

The concept of radioactive waste management in Croatia comprises three major areas: management of low and intermediate level radioactive waste (LILRW), spent fuel management and decommissioning. All the work regarding radioactive waste management program is coordinated by Hazardous Waste Management Agency (APO) and Croatian Power Utility (HEP) in cooperation with other relevant institutions. Since the majority of work has been done in developing low and intermediate level radioactive waste management program, the paper will focus on this part of radioactive waste management, mainly on issues of site selection and characterization, repository design, safety assessment and public acceptance. A short description of national radioactive waste management infrastructure will also be presented. (author)

78 FR 14909 - Amendment of Class B Airspace Description; Houston, TX

Science.gov (United States)

2013-03-08

...-0079; Airspace Docket No. 13-AWA-1] RIN 2120-AA66 Amendment of Class B Airspace Description; Houston.... SUMMARY: This action amends the description of the Houston, TX, Class B airspace area by changing the... 14910

Physics Division Argonne National Laboratory description of the programs and facilities.

Energy Technology Data Exchange (ETDEWEB)

Thayer, K.J. [ed.

1999-05-24

The ANL Physics Division traces its roots to nuclear physics research at the University of Chicago around the time of the second world war. Following the move from the University of Chicago out to the present Argonne site and the formation of Argonne National Laboratory: the Physics Division has had a tradition of research into fundamental aspects of nuclear and atomic physics. Initially, the emphasis was on areas such as neutron physics, mass spectrometry, and theoretical studies of the nuclear shell model. Maria Goeppert Maier was an employee in the Physics Division during the time she did her Nobel-Prize-winning work on the nuclear shell model. These interests diversified and at the present time the research addresses a wide range of current problems in nuclear and atomic physics. The major emphasis of the current experimental nuclear physics research is in heavy-ion physics, centered around the ATLAS facility (Argonne Tandem-Linac Accelerator System) with its new injector providing intense, energetic ion beams over the fill mass range up to uranium. ATLAS is a designated National User Facility and is based on superconducting radio-frequency technology developed in the Physics Division. A small program continues in accelerator development. In addition, the Division has a strong program in medium-energy nuclear physics carried out at a variety of major national and international facilities. The nuclear theory research in the Division spans a wide range of interests including nuclear dynamics with subnucleonic degrees of freedom, dynamics of many-nucleon systems, nuclear structure, and heavy-ion interactions. This research makes contact with experimental research programs in intermediate-energy and heavy-ion physics, both within the Division and on the national and international scale. The Physics Division traditionally has strong connections with the nation's universities. We have many visiting faculty members and we encourage students to participate in our

75 FR 27808 - Section 8 Housing Choice Voucher Program-Demonstration Project of Small Area Fair Market Rents in...

Science.gov (United States)

2010-05-18

... Voucher Program--Demonstration Project of Small Area Fair Market Rents in Certain Metropolitan Areas for.... ACTION: Notice of Demonstration Project of Small Area Fair Market Rents (FMRs) in Selected Metropolitan... topics related to small area FMRs, including how these small areas should be defined. Small area FMRs...

Evolution of traffic emissions in European urban areas: Milan case study

International Nuclear Information System (INIS)

Giugliano, M.; Cemin, A.; Cernuschi, S.

1992-01-01

The worldwide increasing role of mobile sources on the air quality of urban areas requires a careful evaluation of all the potential intervention policies for the reduction of traffic related emissions. The accurate description of the evolution of the source, following the renewal of the fleet with vehicles regulated by stricter emission standards, represents the basic premise for this evaluation. This paper outlines a proposed methodology for the evaluation of the trend of mobile source emissions, implemented on the calculation program EMISMOB, and reports the results obtained with its application to predict the evolution of traffic emissions in the urban area of Milan (Italy) until the year 2010

Ontology learning from interpretations in lightweight description logics

CSIR Research Space (South Africa)

Klarman, S

2015-08-01

Full Text Available International Conference on Inductive Logic programming (ILP), Kyoto, Japan, 20-22 August 2015 Ontology Learning from Interpretations in Lightweight Description Logics Szymon Klarman1 and Katarina Britz2 1 Department of Computer Science, Brunel...

Characterization, Monitoring and Sensor Technology Integrated Program

International Nuclear Information System (INIS)

1993-01-01

This booklet contains summary sheets that describe FY 1993 characterization, monitoring, and sensor technology (CMST) development projects. Currently, 32 projects are funded, 22 through the OTD Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP), 8 through the OTD Program Research and Development Announcement (PRDA) activity managed by the Morgantown Energy Technology Center (METC), and 2 through Interagency Agreements (IAGs). This booklet is not inclusive of those CMST projects which are funded through Integrated Demonstrations (IDs) and other Integrated Programs (IPs). The projects are in six areas: Expedited Site Characterization; Contaminants in Soils and Groundwater; Geophysical and Hydrogeological Measurements; Mixed Wastes in Drums, Burial Grounds, and USTs; Remediation, D ampersand D, and Waste Process Monitoring; and Performance Specifications and Program Support. A task description, technology needs, accomplishments and technology transfer information is given for each project

Beams configuration design in target area with successive quadratic programming method

International Nuclear Information System (INIS)

Shi Zhiquan; Tan Jichun; Wei Xiaofeng; Man Jongzai; Zhang Xiaomin; Yuan Jing; Yuan Xiaodong

1998-01-01

The author describes the application of successive quadratic programming method (SQP) to design laser beam configuration in target area. Based on the requirement of ICF experiment physics, a math model of indirect-driver beam geometry is given. A 3D wire-frame is plotted, in which support lines represent 60 laser entireties and 240 turning points of support lines' segments stand for the spatial positions of reflectors

A Yoga Intervention Program for Patients Suffering from Symptoms of Posttraumatic Stress Disorder: A Qualitative Descriptive Study.

Science.gov (United States)

Jindani, Farah A; Khalsa, G F S

2015-07-01

To understand how individuals with symptoms of posttraumatic stress disorder (PTSD) perceive a trauma-sensitive Kundalini yoga (KY) program. Digitally recorded telephone interviews 30-60 minutes in duration were conducted with 40 individuals with PTSD participating in an 8-week KY treatment program. Interviews were transcribed verbatim and analyzed using qualitative thematic analysis techniques. Qualitative analysis identifies three major themes: self-observed changes, new awareness, and the yoga program itself. Findings suggest that participants noted changes in areas of health and well-being, lifestyle, psychosocial integration, and perceptions of self in relation to the world. Presented are practical suggestions for trauma-related programming. There is a need to consider alternative and potentially empowering approaches to trauma treatment. Yoga-related self-care or self-management strategies are widely accessible, are empowering, and may address the mind-body elements of PTSD.

Material balance area custodian performance evaluation program at PNL

International Nuclear Information System (INIS)

Dickman, D.A.

1991-01-01

This paper reports that the material balance area (MBA) custodian has primary responsibility for control and accountability of nuclear material within an MBA. In this role, the custodian operates as an extension of the facility material control and accountability (MC and A) organization. To effectively meet administrative requirements and protection needs, the custodian must be fully trained in all aspects of MC and A related to the MBA, and custodian performance must be periodically evaluated. U.S. Department of Energy (DOE) Policy requires that each facility provide for a program which ensures that personnel performing MC and A functions are trained and/or qualified to perform their duties and responsibilities and knowledgeable of requirements and procedures related to their functions. the MBA Custodian Performance Evaluation Program at Pacific Northwest Laboratory (PNL) uses a variety of assessment techniques to meet this goal, including internal and independent MBA audits, periodic custodian testing, limited scope performance tests, daily monitoring of MC and A documentation, and reviewing custodian performance during physical inventories

77 FR 43127 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2013

Science.gov (United States)

2012-07-23

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... determination of the States that qualify as Medically Underserved Areas under the Federal Employees Health... law that mandates special consideration for enrollees of certain FEHB plans who receive covered health...

78 FR 50119 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2014

Science.gov (United States)

2013-08-16

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... determination of the states that qualify as Medically Underserved Areas under the Federal Employees Health... law that mandates special consideration for enrollees of certain FEHB plans who receive covered health...

Unified description of structure and reactions: implementing the nuclear field theory program

International Nuclear Information System (INIS)

Broglia, R A; Bortignon, P F; Barranco, F; Vigezzi, E; Idini, A; Potel, G

2016-01-01

The modern theory of the atomic nucleus results from the merging of the liquid drop model of Niels Bohr and Fritz Kalckar, and of the shell model of Marie Goeppert Meyer and Hans Jensen. The first model contributed the concepts of collective excitations. The second, those of independent-particle motion. The unification of these apparently contradictory views in terms of the particle-vibration and particle-rotation couplings carried out by Aage Bohr and Ben Mottelson has allowed for an ever more complete, accurate and detailed description of nuclear structure. Nuclear field theory (NFT), developed by the Copenhagen–Buenos Aires collaboration, provided a powerful quantal embodiment of this unification. Reactions are not only at the basis of quantum mechanics (statistical interpretation, Max Born), but also the specific tools to probe the atomic nucleus. It is then natural that NFT is being extended to deal with processes which involve the continuum in an intrinsic fashion, so as to be able to treat them on an equal footing with those associated with bound states (structure). As a result, spectroscopic studies of transfer to continuum states could eventually make use of the NFT rules, properly extended to take care of recoil effects. In the present contribution we review the implementation of the NFT program of structure and reactions, setting special emphasis on open problems and outstanding predictions. (invited comment)

The Development of National Beef-Cattle Population in Relation to Beef-Cattle Population at the Centre and Non Centre Area, and the Policy of National Development Program

Directory of Open Access Journals (Sweden)

A Sodiq

2006-09-01

Full Text Available The objectives of this research were (1 to find out the development of beef-cattle population at national level, at the Centre Area of Population (CAP and Non Centre Area of Population (NCAP, (2 to assess the relation between population of national beef-cattle and beef-cattle population at CAP and NCAP, (3 to study the policy of beef-cattle development program in Indonesia. The target of this study addressed to the Directorate General of Livestock Services, Republic of Indonesia. A literature review and communication methods were applied in this study. Descriptive and regression analysis were used for data analysis.  The study revealed that: (1 During 1995-2005, beef-cattle population at national level, CAP and NCAP were unstable.  Due to financial crises (1997, the population at national and CAP tended to decrease, but the population at NCAP was relatively constant.  During 2003-2005, national population tended to increase (0.83% per year, and that figure was less than national target (1.05%,  (2 Population of national beef-cattle (Y was highly related (r2: 0,95; MSE: 108508 to the population of beef-cattle at NCAP (X;  Y = 4764492 + 0.896 X;  (3 An increase in beef-cattle population during 2000-2005 was due to an increase in calving and cattle importation. Slaughtering of cows should be controlled to increase calving. The evaluation results of beef self-sufficiency program revealed that there were failures in achieving main goals of the program. It is recommended that to improve the contribution of CAP to national needs, the development of cattle population should be focused in those areas.  The evaluation results of beef self-sufficiency program could be considered in the future policy in term of the development cattle population. Some causes of the policy failures: (1 the formulated policy was not equipped with detailed operation plans. The program formulation was limited to title and goal without elaborating the way to achieve the

Quality Assurance Requirements and Description

International Nuclear Information System (INIS)

Ram Murthy

2002-01-01

The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

The Support of MPA (Marine Protected Area) in Coral Triangle Area: Evidence from Kei Islands, Indonesia

Science.gov (United States)

Hamid, Syahibul K.; Teniwut, Wellem A.; Teniwut, Roberto M. K.; Rahantoknam, Meyske A.; Hasyim, Cawalinya L.; Hungan, Marselus

2017-10-01

Kei Islands located inside the coral triangle. Therefore, the biodiversity level on the sea in this area is considered high. United nation has proposed for water that included in the coral triangle has to apply marine protected area (MPA) to preserve the area. The main problem is most of the community especially in Kei Islands have depended on the sea as their sources of the economy even fisheries commodity like fish play a large part on the inflation rate and other prosperity indicators likes school and housing. Also, Kei Islands practice on form local wisdom for owning areal of the sea which calls “petuanan laut” by certain of villages or group of villages in one area. This study aimed to map the cluster of catching fisheries area based on the quantity of fish supply on a local market in Kei Islands and measure each cluster on their support and perspective on Marine Protected Area (MPA). We conducted a focus group discussion and collecting additional data by questionnaires with descriptive and quantitative analysis with logistic regression. The implication of this study can provide a clear view of coastal communities view on MPA program also to identify an area that has marine resources, human resources, and equipment to provide government an empirical view on catching fisheries in Kei Islands to issued better policy to develop fishing industry in Kei Islands.

Isochronous Cyclotron Closed Equilibrium Orbit Calculation Program Description

CERN Document Server

Kian, I N; Tarashkevich, R

2003-01-01

The Equilibrium Orbit Research Program - EORP, written in C++ with the use of Visual C++ is described. The program is intended for the calculation of the particle rotation frequency and particle kinetic energy in the closed equilibrium orbits of an isochronous cyclotron, where the closed equilibrium orbits are described through the radius and particle momentum angle: r_{eo}(\\theta) and \\varphi_{p}(\\theta). The program algorithm was developed on the basis of articles, lecture notes and original analytic calculations. The results of calculations by the EORP were checked and confirmed by using the results of calculations by the numerical methods. The discrepancies between the EORP results and the numerical method results for the calculations of the particle rotation frequency and particle kinetic energy are within the limits of \\pm1\\cdot10^{-4}. The EORP results and the numerical method results for the calculations of r_{eo}(\\theta) and \\varphi_{p}(\\theta) practically coincide. All this proves the accuracy of ca...

Office of radiation and indoor air: Program description

International Nuclear Information System (INIS)

1993-06-01

The goal of the Environmental Protection Agency's (EPA) Office of Radiation and Indoor Air is to protect the public and the environment from exposures to radiation and indoor air pollutants. The Office develops protection criteria, standards, and policies and works with other programs within EPA and other agencies to control radiation and indoor air pollution exposures; provides technical assistance to states through EPA's regional offices and other agencies having radiation and indoor air protection programs; directs an environmental radiation monitoring program; responds to radiological emergencies; and evaluates and assesses the overall risk and impact of radiation and indoor air pollution. The Office is EPA's lead office for intra- and interagency activities coordinated through the Committee for Indoor Air Quality. It coordinates with and assists the Office of Enforcement in enforcement activities where EPA has jurisdiction. The Office disseminates information and works with state and local governments, industry and professional groups, and citizens to promote actions to reduce exposures to harmful levels of radiation and indoor air pollutants

Integrated Project Management System description

International Nuclear Information System (INIS)

1994-09-01

The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

Molecular Epidemiology of Entamoeba: First Description of Entamoeba moshkovskii in a Rural Area from Central Colombia.

Directory of Open Access Journals (Sweden)

Myriam Consuelo López

Full Text Available Entamoeba histolytica, E. dispar and E. moshkovskii are the most frequent species described in human infection where E. histolytica is the only true pathogen. The epidemiology of this infection is complex due to the absence of a routine exam that allows a correct discrimination of the Entamoeba species complex. Therefore, molecular methods appear as the unique epidemiological tool to accomplish the species discrimination. Herein, we conducted a cross-sectional study to determine the frequency of Entamoeba species infections in a group of asymptomatic individuals from a rural area in central Colombia.A total of 181 fecal samples from asymptomatic children under 16 years old from the hamlet La Vírgen, Cundinamarca (Colombia that voluntarily accepted to participate in the study were collected. The fecal samples were examined by light microscopy and DNA-extracted, subsequently submitted to molecular discrimination of E. dispar/E. histolytica/E. moshkovskii infection based on a multiplex PCR assay targeting the 18S rRNA fragment. To confirm the species description, twenty samples were randomly submitted to DNA sequencing of the aforementioned fragment. By direct microscopic examination, frequency of the complex E. histolytica/E. dispar/E. moshkovskii was 18.8% (34/181. PCR showed a frequency of 49.1% (89/181, discriminated as 23.2% (42/181 that were positive for E. dispar, 25.4% (46/181 for E. moshkovskii and 0.55% (1/ 181 for E. histolytica. Also, mixed infections were detected between E. dispar and E. moshkovskii at 4.42% (8/181 of the samples. Molecular barcoding confirmed the diagnosis depicted by the multiplex PCR assay.This is the first description of E. moshkovskii in Colombia and the second report in South-America to our knowledge. Our results suggest the need to unravel the true epidemiology of Entamoeba infections around the world, including the real pathogenic role that E. moshkovskii may have.

FLUST-2D - A computer code for the calculation of the two-dimensional flow of a compressible medium in coupled retangular areas

International Nuclear Information System (INIS)

Enderle, G.

1979-01-01

The computer-code FLUST-2D is able to calculate the two-dimensional flow of a compressible fluid in arbitrary coupled rectangular areas. In a finite-difference scheme the program computes pressure, density, internal energy and velocity. Starting with a basic set of equations, the difference equations in a rectangular grid are developed. The computational cycle for coupled fluid areas is described. Results of test calculations are compared to analytical solutions and the influence of time step and mesh size are investigated. The program was used to precalculate the blowdown experiments of the HDR experimental program. Downcomer, plena, internal vessel region, blowdown pipe and a containment area have been modelled two-dimensionally. The major results of the precalculations are presented. This report also contains a description of the code structure and user information. (orig.) [de

Suggested state requirements and criteria for a low-level radioactive waste disposal site regulatory program

International Nuclear Information System (INIS)

Ratliff, R.A.; Dornsife, B.; Autry, V.; Gronemyer, L.; Vaden, J.; Cashman, T.

1985-08-01

Description of criteria and procedure is presented for a state to follow in the development of a program to regulate a LLW disposal site. This would include identifying those portions of the NRC regulations that should be matters of compatibility, identifying the various expertise and disciplines that will be necessary to effectively regulate a disposal site, identifying the resources necessary for conducting a confirmatory monitoring program, and providing suggestions in other areas which, based on experiences, would result in a more effective regulatory program

TASAC a computer program for thermal analysis of severe accident conditions. Version 3/01, Dec 1991. Model description and user`s guide

Energy Technology Data Exchange (ETDEWEB)

Stempniewicz, M; Marks, P; Salwa, K

1992-06-01

TASAC (Thermal Analysis of Severe Accident Conditions) is computer code developed in the Institute of Atomic Energy written in FORTRAN 77 for the digital computer analysis of PWR rod bundle behaviour during severe accident conditions. The code has the ability to model an early stage of core degradation including heat transfer inside the rods, convective and radiative heat exchange as well as cladding interactions with coolant and fuel, hydrogen generation, melting, relocations and refreezing of fuel rod materials with dissolution of UO{sub 2} and ZrO{sub 2} in liquid phase. The code was applied for the simulation of International Standard Problem number 28, performed on PHEBUS test facility. This report contains the program physical models description, detailed description of input data requirements and results of code verification. The main directions for future TASAC code development are formulated. (author). 20 refs, 39 figs, 4 tabs.

A PROGRAM OF ADULT EDUCATION FOR THE MARSHALL COUNTY HIGH SCHOOL SERVICE AREA, LEWISBURG, TENNESSEE.

Science.gov (United States)

BARNES, JOHN O., JR.

THE NEED FOR AN ADULT EDUCATION PROGRAM IN THE MARSHALL COUNTY (TENNESSEE) HIGH SCHOOL SERVICE AREA WAS STUDIED THROUGH QUESTIONNAIRES COMPLETED BY 207 ADULTS, EXAMINATION OF SCHOOL AND GOVERNMENT RECORDS, AND PERSONAL INTERVIEWS. IT WAS FOUND THAT OVER HALF OF THE AREA RESIDENTS WERE NOT HIGH SCHOOL GRADUATES, AND THAT MANY ADULTS DESIRED MORE…

NWTS waste package program plan. Volume I. Program strategy, description, and schedule

International Nuclear Information System (INIS)

1981-10-01

This document describes the work planned for developing the technology to design, test and produce packages used for the long-term isolation of nuclear waste in deep geologic repositories. Waste forms considered include spent fuel and high-level waste. The testing and selection effort for barrier materials for radionuclide containment is described. The NWTS waste package program is a design-driven effort; waste package conceptual designs are used as input for preliminary designs, which are upgraded to a final design as materials and testing data become available. Performance assessment models are developed and validated. Milestones and a detailed schedule are given for the waste package development effort. Program logic networks defining work flow, interfaces among the NWTS Projects, and interrelationships of specific activities are presented. Detailed work elements are provided for the Waste Package Program Plan subtasks - design and development, waste form, barrier materials, and performance evaluation - for salt and basalt, host rocks for which the state of waste package knowledge and the corresponding data base are advanced

Building Program Models Incrementally from Informal Descriptions.

Science.gov (United States)

1979-10-01

specified at each step. Since the user controls the interaction, the user may determine the order in which information flows into PMB. Information is received...until only ten years ago the term aautomatic programming" referred to the development of the assemblers, macro expanders, and compilers for these

Breast feeding practices and newborn care in rural areas: A descriptive cross-sectional study

Directory of Open Access Journals (Sweden)

Madhu K

2009-01-01

Full Text Available Context: Breastfeeding practices play an important role in reducing child mortality and morbidity. This study was aimed to describe the breastfeeding practices prevalent in rural areas. Objectives: The primary objective of this study was to describe the breastfeeding and newborn care practices in rural areas and the secondary objective was to describe the factors affecting the initiation and duration of breastfeeding. Settings and Design: The study was conducted in primary health care center (PHC that is attached to a medical college in Kengeri, rural Bangalore, Karnataka. Materials and Methods: Mothers with children who were 9 months old who came to the PHC for measles vaccination were included in the study and data was collected using the pre-tested questionnaire on breastfeeding and newborn practices. Results: Our study shows 97% of the mothers initiated breastfeeding, 19% used pre lacteal feeds, 90% had hospital deliveries and 10% had home deliveries, and 50% used a house knife to cut the umbilical cord among home deliveries. Conclusions: This study emphasizes the need for breastfeeding intervention programs especially for the mother during antenatal and postnatal check-ups and practices like discarding the colostrum and early/late weaning are still widely prevalent and need to be addressed.

Logical Characterisation of Ontology Construction using Fuzzy Description Logics

DEFF Research Database (Denmark)

Badie, Farshad; Götzsche, Hans

had the extension of ontologies with Fuzzy Logic capabilities which plan to make proper backgrounds for ontology driven reasoning and argumentation on vague and imprecise domains. This presentation conceptualises learning from fuzzy classes using the Inductive Logic Programming framework. Then......, employs Description Logics in characterising and analysing fuzzy statements. And finally, provides a conceptual framework describing fuzzy concept learning in ontologies using the Inductive Logic Programming....

Description logic rules

CERN Document Server

Krötzsch, M

2010-01-01

Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

47 CFR 79.3 - Video description of video programming.

Science.gov (United States)

2010-10-01

... television audience measurement service, based on television viewership in the counties that make up each DMA... other distributor of video programming for residential reception that delivers such programming directly... the national audience share during prime time of nonbroadcast networks, as determined by Nielsen Media...

Hydrogeochemical evaluation. Preliminary site description Forsmark area - version 1.2

International Nuclear Information System (INIS)

Laaksoharju, Marcus

2005-03-01

Siting studies for SKB's programme of deep geological disposal of nuclear fuel waste currently involves the investigation of two locations, Forsmark and Laxemar-Simpevarp, on the eastern coast of Sweden to determine their geological, hydrogeochemical and hydrogeological characteristics. Present work completed has resulted in Model version 1.2 which represents the second evaluation of the available Forsmark groundwater analytical data collected up to June, 2004. The Hydrochemical Analytical Group (HAG) had access to data where a total of 1,131 water samples had been collected from the surface and sub-surface environment; 252 samples were collected from drilled boreholes. The deepest fracture groundwater samples with sufficient analytical data reflected depths down to 1 km. Most of the waters sampled (66%) lacked crucial analytical information that restricted the evaluation. Model version 1.2 focuses on geochemical and mixing processes affecting the groundwater composition in the uppermost part of the bedrock, down to repository levels, and eventually extending to 1,000 m depth. The complex groundwater evolution and patterns at Forsmark are a result of many factors such as: a) the present-day topography and proximity to the Baltic Sea, b) past changes in hydrogeology related to glaciation/deglaciation, land uplift and repeated marine/lake water regressions/ transgressions, and c) organic or inorganic alteration of the groundwater composition caused by microbial processes or water/rock interactions. The sampled groundwaters reflect to various degrees processes relating to modern or ancient water/rock interactions and mixing. The groundwater flow regimes at Forsmark are considered local and extend down to depths of around 600 m depending on hydraulic conditions. Close to the Baltic Sea coastline where topographical variation is even less, groundwater flow penetration to depth will subsequently be less marked and such areas will tend to be characterised by groundwater

Hydrogeochemical evaluation. Preliminary site description Forsmark area - version 1.2

Energy Technology Data Exchange (ETDEWEB)

Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

2005-03-15

Siting studies for SKB's programme of deep geological disposal of nuclear fuel waste currently involves the investigation of two locations, Forsmark and Laxemar-Simpevarp, on the eastern coast of Sweden to determine their geological, hydrogeochemical and hydrogeological characteristics. Present work completed has resulted in Model version 1.2 which represents the second evaluation of the available Forsmark groundwater analytical data collected up to June, 2004. The Hydrochemical Analytical Group (HAG) had access to data where a total of 1,131 water samples had been collected from the surface and sub-surface environment; 252 samples were collected from drilled boreholes. The deepest fracture groundwater samples with sufficient analytical data reflected depths down to 1 km. Most of the waters sampled (66%) lacked crucial analytical information that restricted the evaluation. Model version 1.2 focuses on geochemical and mixing processes affecting the groundwater composition in the uppermost part of the bedrock, down to repository levels, and eventually extending to 1,000 m depth. The complex groundwater evolution and patterns at Forsmark are a result of many factors such as: a) the present-day topography and proximity to the Baltic Sea, b) past changes in hydrogeology related to glaciation/deglaciation, land uplift and repeated marine/lake water regressions/ transgressions, and c) organic or inorganic alteration of the groundwater composition caused by microbial processes or water/rock interactions. The sampled groundwaters reflect to various degrees processes relating to modern or ancient water/rock interactions and mixing. The groundwater flow regimes at Forsmark are considered local and extend down to depths of around 600 m depending on hydraulic conditions. Close to the Baltic Sea coastline where topographical variation is even less, groundwater flow penetration to depth will subsequently be less marked and such areas will tend to be characterised by

Math Description Engine Software Development Kit

Science.gov (United States)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

BIPR-5 program

International Nuclear Information System (INIS)

Petrunin, D.M.; Belyaeva, E.D.; Kireeva, I.L.

1975-01-01

The BIPR-5 program, which solves the relevant one-group equation in a three-dimensional inhomogeneous WWER reactor, makes it possible to simulate all the principal states of the core, including the maintenance of the critical state by means of rods or a liquid absorber on fuel burn-up or in transitional processes on xenon and samarium. The present paper includes a brief description of the program structure and a detailed description of input data and actually represents maintenance instructions

Source document for waste area groupings at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Osborne, P.L.; Kuhaida, A.J., Jr.

1996-09-01

This document serves as a source document for Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and other types of documents developed for and pertaining to Environmental Restoration (ER) Program activities at Oak Ridge National Laboratory (ORNL). It contains descriptions of the (1) regulatory requirements for the ORR ER Program, (2) Oak Ridge Reservation (ORR) ER Program, (3) ORNL site history and characterization, and (4) history and characterization of Waste Area Groupings (WAGS) 1-20. This document was created to save time, effort, and money for persons and organizations drafting documents for the ER Program and to improve consistency in the documents prepared for the program. By eliminating the repetitious use of selected information about the program, this document will help reduce the time and costs associated with producing program documents. By serving as a benchmark for selected information about the ER Program, this reference will help ensure that information presented in future documents is accurate and complete

Description of the DLL regulation interface in HAWC

DEFF Research Database (Denmark)

Larsen, Torben J.

2001-01-01

This report contains a description of the external regulation interface between the aeroelastic code HAWC and a separate regulation unit programmed as a DLL (Dynamic Link Library). Specific HAWC commands used with the regulation as well as simple DLLexamples written in Delphi, Fortran and C...

Environmentally Sensitive Areas Surveys Program threatened and endangered species survey: Progress report. Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

King, A.L.; Awl, D.J.; Gabrielsen, C.A.

1994-09-01

The Endangered Species Act (originally passed in 1973) is a Federal statute that protects both animal and plant species. The Endangered Species Act identifies species which are, without careful management, in danger of becoming extinct and species that are considered threatened. Along with the designation of threatened or endangered, the Endangered Species Act provides for the identification of appropriate habitat for these species. Since 1993, the United States Department of Energy`s (DOE) Environmental Restoration (ER) Program has supported a program to survey the Oak Ridge Reservation (ORR) for threatened and endangered species. The Environmentally Sensitive Areas Surveys Program initiated vascular plant surveys during fiscal year 1993 and vertebrate animal surveys during fiscal year 1994 to determine the baseline condition of threatened and endangered species on the ORR at the present time. Data collected during these surveys are currently aiding Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Remedial Investigations on the ORR. They also provide data for ER and Waste Management decision documents, ensure that decisions have technical and legal defensibility, provide a baseline for ensuring compliance with principal legal requirements and will increase public confidence in DOE`s adherence to all related environmental resources rules, laws, regulations, and instructions. This report discusses the progress to date of the threatened and endangered species surveys of the ORR.

Plutonium stabilization and disposition focus area, FY 1999 and FY 2000 multi-year program plan

International Nuclear Information System (INIS)

1998-03-01

Consistent with the Environmental Management's (EM's) plan titled, ''Accelerating Cleanup: Paths to Closure'', and ongoing efforts within the Executive Branch and Congress, this Multi-Year Program Plan (MYPP) for the Plutonium Focus Area was written to ensure that technical gap projects are effectively managed and measured. The Plutonium Focus Area (PFA) defines and manages technology development programs that contribute to the effective stabilization of nuclear materials and their subsequent safe storage and final disposition. The scope of PFA activities includes the complete spectrum of plutonium materials, special isotopes, and other fissile materials. The PFA enables solutions to site-specific and complex-wide technology issues associated with plutonium remediation, stabilization, and preparation for disposition. The report describes the current technical activities, namely: Plutonium stabilization (9 studies); Highly enriched uranium stabilization (2 studies); Russian collaboration program (2 studies); Packaging and storage technologies (6 studies); and PFA management work package/product line (3 studies). Budget information for FY 1999 and FY 2000 is provided

Plutonium stabilization and disposition focus area, FY 1999 and FY 2000 multi-year program plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Consistent with the Environmental Management`s (EM`s) plan titled, ``Accelerating Cleanup: Paths to Closure``, and ongoing efforts within the Executive Branch and Congress, this Multi-Year Program Plan (MYPP) for the Plutonium Focus Area was written to ensure that technical gap projects are effectively managed and measured. The Plutonium Focus Area (PFA) defines and manages technology development programs that contribute to the effective stabilization of nuclear materials and their subsequent safe storage and final disposition. The scope of PFA activities includes the complete spectrum of plutonium materials, special isotopes, and other fissile materials. The PFA enables solutions to site-specific and complex-wide technology issues associated with plutonium remediation, stabilization, and preparation for disposition. The report describes the current technical activities, namely: Plutonium stabilization (9 studies); Highly enriched uranium stabilization (2 studies); Russian collaboration program (2 studies); Packaging and storage technologies (6 studies); and PFA management work package/product line (3 studies). Budget information for FY 1999 and FY 2000 is provided.

Hydrologic resources management program and underground test area operable unit fy 1997

Energy Technology Data Exchange (ETDEWEB)

Smith, D. F., LLNL

1998-05-01

This report present the results of FY 1997 technical studies conducted by the Lawrence Livermore National Laboratory (LLNL) as part of the Hydrology and Radionuclide Migration Program (HRMP) and Underground Test Area Operable Unit (UGTA). The HRMP is sponsored by the US Department of Energy to assess the environmental (radiochemical and hydrologic) consequences of underground nuclear weapons testing at the Nevada Test Site.

Final results of the Cuban program for children from areas affected by the Chernobyl accident

International Nuclear Information System (INIS)

Medina, Julio; García, Omar

2016-01-01

From 1990 till 2011, a free health care program for children from areas affected by the Chernobyl accident was organized and implemented by the Cuban Government. A significant number of qualified personal in medicine and science collaborated with this program. The information gathered for more than 21 years and the conclusive results obtained in the program are presented here. During this time, 26 114 patients, 84 % children, mostly from Ukraine, Russia and Belarus were treated in the mentioned program. Other aspects of the Cuban medical assistance in Ukraine and the main results obtained in the radiological impact evaluation of the accident on the children treated in Cuba are also included. (author)

40 CFR 70.4 - State program submittals and transition.

Science.gov (United States)

2010-07-01

... description in narrative form of the scope, structure, coverage, and processes of the State program. (ii) A description of the organization and structure of the agency or agencies that will have responsibility for... strategies). (5) A complete description of the State's compliance tracking and enforcement program or...

M-area hazardous waste management facility groundwater monitoring and corrective-action report, First quarter 1995, Volume 1

International Nuclear Information System (INIS)

1995-05-01

This report, in three volumes, describes the ground water monitoring and c corrective-action program at the M-Area Hazardous Waste Management Facility (HWMF) at the Savannah River Site (SRS) during the fourth quarter 1994 and first quarter 1995. Concise description of the program and considerable data documenting the monitoring and remedial activities are included in the document. This is Volume 1 covering the following topics: sampling and results; hydrogeologic assessment; water quality assessment; effectiveness of the corrective-action program; corrective-action system operation and performance; monitoring and corrective-action program assessment; proposed monitoring and corrective-action program modifications. Also included are the following appendicies: A-standards; B-flagging criteria; C-figures; D-monitoring results tables; E-data quality/usability assessment

Evaluasi Program-program Pengentasan Kemiskinan di Provinsi Bali

Directory of Open Access Journals (Sweden)

AAIN Marhaeni

2014-07-01

, as well as the informants. Thus the total number of respondents and informants were as many as 270 people in the three regencies. The sampling method used both for the respondents of program recipients and for the informants was purposive sampling combined with accidental sampling. The data collection method was conducted by a variety of methods: observation, interviews, and in-depth interviews. Before the data collection was done, the test of validity and reliability tests were conducted on the research instruments to be used in collecting the data. The analysis technique used was the descriptive statistical techniques both single-frequency distributions and cross-tabulations. It was also conducted the qualitative or descriptive analysis based on the results obtained from the in-depth interview of the informants and the respondents. Overall, the effectiveness of aid programs in the field of food aid, particularly aid of rice for the poor is lesser compared with the effectiveness of the other two aids, namely in the areas of education and health. The recipients of food aids especially those who received rice for the poor gained less benefits from the aids given. The problem faced in the real situation, namely prior to the distribution of aids, the village meetings (Muskel and Musdes were not conducted in a timely manner so that the data received from the central government to be used as the basis for the distribution of rice for the poor become less accurate. Weaknesses faced by the program in its implementation, among others, the implementation of data collection that is considered to be too long so that its target is inaccurate especially the distribution of the rice aids for the poor.

Nevada National Security Site 2014 Data Report: Groundwater Monitoring Program Area 5 Radioactive Waste Management Site

Energy Technology Data Exchange (ETDEWEB)

Hudson, David [National Security Technologies, LLC. (NSTec), Las Vegas, NV (United States)

2015-02-01

analyzed for toxicity characteristic contaminants and polychlorinated biphenyls (PCB). Beginning with the sample from July 31, 2013, pH and specific conductance were also measured. Leachate analysis results show no evidence of contamination. Results for toxicity characteristic contaminants are all below regulatory levels and analysis quantification limits. No quantifiable PCB levels were detected in any sample. Results for pH and specific conductance are also within expected ranges. After analysis, leachate was pumped from the collection tank and used in Cell 18 for dust control. The report contains an updated cumulative chronology for the Area 5 RWMS Groundwater Monitoring Program and a brief description of the site hydrogeology.

DOE Research Set-Aside Areas of the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Davis, C.E.; Janecek, L.L.

1997-08-31

Designated as the first of seven National Environmental Research Parks (NERPs) by the Atomic Energy Commission (now the Department of Energy), the Savannah River Site (SRS) is an important ecological component of the Southeastern Mixed Forest Ecoregion located along the Savannah River south of Aiken, South Carolina. Integral to the Savannah River Site NERP are the DOE Research Set-Aside Areas. Scattered across the SRS, these thirty tracts of land have been set aside for ecological research and are protected from public access and most routine Site maintenance and forest management activities. Ranging in size from 8.5 acres (3.44 ha) to 7,364 acres (2,980 ha), the thirty Set-Aside Areas total 14,005 acres (5,668 ha) and comprise approximately 7% of the Site`s total area. This system of Set-Aside Areas originally was established to represent the major plant communities and habitat types indigenous to the SRS (old-fields, sandhills, upland hardwood, mixed pine/hardwood, bottomland forests, swamp forests, Carolina bays, and fresh water streams and impoundments), as well as to preserve habitats for endangered, threatened, or rare plant and animal populations. Many long-term ecological studies are conducted in the Set-Asides, which also serve as control areas in evaluations of the potential impacts of SRS operations on other regions of the Site. The purpose of this document is to give an historical account of the SRS Set-Aside Program and to provide a descriptive profile of each of the Set-Aside Areas. These descriptions include a narrative for each Area, information on the plant communities and soil types found there, lists of sensitive plants and animals documented from each Area, an account of the ecological research conducted in each Area, locator and resource composition maps, and a list of Site-Use permits and publications associated with each Set-Aside.

DOE Research Set-Aside Areas of the Savannah River Site

International Nuclear Information System (INIS)

Davis, C.E.; Janecek, L.L.

1997-01-01

Designated as the first of seven National Environmental Research Parks (NERPs) by the Atomic Energy Commission (now the Department of Energy), the Savannah River Site (SRS) is an important ecological component of the Southeastern Mixed Forest Ecoregion located along the Savannah River south of Aiken, South Carolina. Integral to the Savannah River Site NERP are the DOE Research Set-Aside Areas. Scattered across the SRS, these thirty tracts of land have been set aside for ecological research and are protected from public access and most routine Site maintenance and forest management activities. Ranging in size from 8.5 acres (3.44 ha) to 7,364 acres (2,980 ha), the thirty Set-Aside Areas total 14,005 acres (5,668 ha) and comprise approximately 7% of the Site's total area. This system of Set-Aside Areas originally was established to represent the major plant communities and habitat types indigenous to the SRS (old-fields, sandhills, upland hardwood, mixed pine/hardwood, bottomland forests, swamp forests, Carolina bays, and fresh water streams and impoundments), as well as to preserve habitats for endangered, threatened, or rare plant and animal populations. Many long-term ecological studies are conducted in the Set-Asides, which also serve as control areas in evaluations of the potential impacts of SRS operations on other regions of the Site. The purpose of this document is to give an historical account of the SRS Set-Aside Program and to provide a descriptive profile of each of the Set-Aside Areas. These descriptions include a narrative for each Area, information on the plant communities and soil types found there, lists of sensitive plants and animals documented from each Area, an account of the ecological research conducted in each Area, locator and resource composition maps, and a list of Site-Use permits and publications associated with each Set-Aside

A simulation program for electronics experiments

International Nuclear Information System (INIS)

Brun, R.; Hagelberg, R.; Hansroul, M.; Lassalle, Jc.

1978-01-01

A general description of the GEANT program is given. The GEANT program has been designed to cover a wide variety of particle detectors. The program is separated into 4 independent parts: kinematics generation, trackina in space, tracks intersection with detectors and digitization of detector information. The tracking requires the introduction of the experimental set-up description in terms of media. The detectors are described independently of the media in a separate way. The media and detector description have to be furnished by the user. The implementation of the GEANT program is based on 2 sets of subprograms: a fixed set of subprograms, which are independent of the experimental situation and thus transparent to the user; a set of user subprograms which should be written by the user. The GEANT program produces results stored in data banks, which the user can convert into his own format. In addition the GEANT program provides printed and graphical outputs

78 FR 35054 - Proposed Collection; Comment Request; Program to Prevent Smoking in Hazardous Areas (Pertains to...

Science.gov (United States)

2013-06-11

...; Program to Prevent Smoking in Hazardous Areas (Pertains to Underground Coal Mines) AGENCY: Mine Safety and... carrying smoking materials, matches, or lighters underground and to prevent smoking in hazardous areas... Act), 30 U.S.C. 877(c), and 30 CFR 75.1702 prohibits persons from smoking or carrying smoking...

CONTEMPT4/MOD6: a multicompartment containment system analysis program

International Nuclear Information System (INIS)

Lin, C.C.; Economos, C.; Lehner, J.R.; Maise, G.

1986-03-01

CONTEMPT4/MOD6 is a digital computer program that describes the response of multicompartment containment system subjected to postulated loss-of-coolant accident (LOCA) conditions. The program is written in FORTRAN IV and can accomodate both pressurized water reactor (PWR) and boiling water reactor (BWR) containment systems. Also, both design basis accident (DBA) and degraded core type LOCA conditions can be analyzed. The program calculates the time variation of compartment pressures, temperatures and mass and energy inventories due to intercompartment mass and energy exchange taking into account user supplied descriptions of compartments, intercompartment junction flow areas, LOCA source terms and user selected problem features. Analytical models available to describe containment systems include models for containment fans and pumps, cooling sprays, heat conducting structures, sump drains, PWR ice condensers and BWR pressure suppression systems. To accommodate degraded core type accidents, analytical models for hydrogen and carbon monoxide combustion within compartments and energy transfer due to gas radiation are also provided. Dynamic storage allocation (DSA) is used to limit the amount of computer core used for each problem. The flexibility needed to more realistically model the complexity of prototypical containments is provided by the multicompartment capability (up to 999 individual compartments) and generalized user oriented input data descriptions. The program employs an implicit algorithm to compute junction flow when numerically induced flow oscillations are encountered. This capability provides significant reduction of computer run time relative to previous codes in the CONTEMPT series. Descriptions of these analytical models are presented, together with input instructions for the CONTEMPT4/MOD6 program and sample problem results. 23 refs., 62 figs

Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

Energy Technology Data Exchange (ETDEWEB)

Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2012-02-03

This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

Quality Assurance Program Plan Waste Management Federal Services of Hanford, Inc

International Nuclear Information System (INIS)

VOLKMAN, D.D.

1999-01-01

This document is the Quality Assurance Program Plan (QAPP) for Waste Management Federal Services of Hanford, Inc. (WMH), that implements the requirements of the Project Hanford Management Contract (PHMC), HNF-MP-599, Project Hanford Quality Assurance Program Description (QAPD) document, and the Hanford Federal Facility Agreement with Consent Order (Tri-Party Agreement), Sections 6.5 and 7.8. WHM is responsible for the treatment, storage, and disposal of liquid and solid wastes generated at the Hanford Site as well as those wastes received from other US Department of Energy (DOE) and non-DOE sites. WMH operations include the Low-Level Burial Grounds, Central Waste Complex (a mixed-waste storage complex), a nonradioactive dangerous waste storage facility, the Transuranic Storage Facility, T Plant, Waste Receiving and Processing Facility, 200 Area Liquid Effluent Facility, 200 Area Treated Effluent Disposal Facility, the Liquid Effluent Retention Facility, the 242-A Evaporator, 300 Area Treatment Effluent Disposal Facility, the 340 Facility (a radioactive liquid waste handling facility), 222-S Laboratory, the Waste Sampling and Characterization Facility, and the Hanford TRU Waste Program

Tanks Focus Area Alternative Salt Processing Research and Development Program Plan

Energy Technology Data Exchange (ETDEWEB)

Harmon, Harry D.

2000-05-15

In March 2000, DOE-Headquarters (HQ) requested the Tanks Focus Area (TFA)to assume management responsibility for the Salt Processing Project technology development program at Savannah River Site. The TFA was requested to conduct several activities, including review and revision of the technology development roadmaps, development of down-selection criteria, and preparation of a comprehensive Research and Development (R&D) Program Plan for three candidate cesium removal technologies, as well as the Alpha and strontium removal processes that must also be carried out. The three cesium removal candidate technologies are Crystalline Silicotitanate (CST) Non-Elutable Ion Exchange, Caustic Side Solvent Extraction (CSSX), and Small Tank Tetraphenylborate Precipitation (STTP). This plan describes the technology development needs for each process that must be satisfied in order to reach a down-selection decision, as well as continuing technology development required to support conceptual design activities.

Tanks Focus Area Alternative Salt Processing Research and Development Program Plan

Energy Technology Data Exchange (ETDEWEB)

Harmon, Harry D.

2000-11-30

In March 2000, DOE-Headquarters (HQ) requested the Tanks Focus Area (TFA) to assume management responsibility for the Salt Processing Project technology development program at Savannah River Site. The TFA was requested to conduct several activities, including review and revision of the technology development roadmaps, development of down-selection criteria, and preparation of a comprehensive Research and Development (R&D) Program Plan for three candidate cesium removal technologies, as well as the Alpha and strontium removal processes that must also be carried out. The three cesium removal candidate technologies are Crystalline Silicotitanate (CST) Non-Elutable Ion Exchange, Caustic Side Solvent Extraction (CSSX), and Small Tank Tetraphenylborate Precipitation (STTP). This plan describes the technology development needs for each process that must be satisfied in order to reach a down-selection decision, as well as continuing technology development required to support conceptual design activities.

World Perspective Case Descriptions on Educational Programs for Adults: India.

Science.gov (United States)

Jayagopal, R.; Burns, E. P.

Four adult education programs being conducted in India are described in the case studies in this packet. Two of the projects involve literacy; the third promotes literacy as one part of its community development program, and the fourth trains workers in hotel management and catering technology. The literacy programs are (1) development of a…

Simpevarp - site descriptive model version 0

International Nuclear Information System (INIS)

2002-11-01

During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

CONTRIBUTIONS FOR DEVELOPING OF A COMPUTER AIDED LEARNING ENVIRONMENT OF DESCRIPTIVE GEOMETRY

Directory of Open Access Journals (Sweden)

Antonescu Ion

2009-07-01

Full Text Available The paper presents the authors’ contributions for developing a computer code for teaching of descriptive geometry using the computer aided learning techniques. The program was implemented using the programming interface and the 3D modeling capabilities of the AutoCAD system.

Strategic environmental safety inspection for the National disposal program. Description of the inspection volume. Documentation for the scoping team; Strategische Umweltpruefung zum Nationalen Entsorgungsprogramm. Beschreibung des Untersuchungsumfangs. Unterlage fuer den Scoping-Termin

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-01-06

The Strategic environmental safety inspection for the National disposal program covers the following topics: Legal framework: determination of the requirement for an environmental inspection program, coordination of the scoping team into the overall context; environmental targets; approach for assessment and evaluation of environmental impact, description of the inspection targets for the strategic environmental inspection; consideration of alternatives.

Unocal Parachute Creek Shale Oil Program Environmental Monitoring Program. Annual report, October 1, 1990-December 31, 1991

International Nuclear Information System (INIS)

1992-01-01

The Energy Security Act of 1980 established a program to provide financial assistance to private industry in the construction and operation of commercial-scale synthetic fuels plants. The Parachute Creek Shale Oil Program is one of four projects awarded financial assistance. The Program agreed to comply with existing environmental monitoring regulations and to develop an Environmental Monitoring Plan (EMP) incorporating supplemental monitoring in the areas of water, air, solid waste, and worker health and safety during the period 1985-1992. These activities are described in a series of quarterly and annual reports. The report contains summaries of compliance and supplemental environmental and industrial hygiene and health surveillance monitoring conducted during the period; compliance permits, permit changes, and Notices of Violations discussions; statistical significance of Employee General Health information, medical histories, physical exams, pulmonary functions, clinical tests and demographics; independent audit reports; and a description of retorted shale disposal activities

Production Logistics Simulation Supported by Process Description Languages

Directory of Open Access Journals (Sweden)

Bohács Gábor

2016-03-01

Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

Standarized input for Hanford environmental impact statements. Part II: site description

International Nuclear Information System (INIS)

Jamison, J.D.

1982-07-01

Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act

Description of climate, surface hydrology, and near-surface hydrogeology. Simpevarp 1.2

International Nuclear Information System (INIS)

Werner, Kent; Bosson, Emma; Berglund, Sten

2005-04-01

This report presents and evaluates the site investigations and primary data on meteorology, surface hydrology and near-surface hydrogeology that are available in the Simpevarp 1.2 'data freeze'. The main objective is to update the previous Simpevarp 1.1 description of the meteorological, surface hydrological and near-surface hydrogeological conditions in the Simpevarp area. Based on the Simpevarp 1.2 dataset, an updated conceptual and descriptive model of the surface and near-surface water flow conditions in the Simpevarp area is presented. In cases where site investigation data are not yet available, regional and/or generic data are used as input to the modelling. GIS- and process-based tools, used for initial quantitative flow modelling, are also presented. The objectives of this initial quantitative modelling are to illustrate, quantify and support the site descriptive model, and also to produce relevant input data to the ecological systems modelling within the SKB SurfaceNet framework.For the Simpevarp 1.2 model, the relevant site investigations include the establishment of one local meteorological station and surface-hydrological stations for discharge measurements, delineation and description of catchment areas, manual discharge measurements in water courses, slug tests in groundwater monitoring wells, and manual groundwater level measurements. In addition, other investigations have also contributed to the modelling, providing data on geometry (including topography), data from surface-based geological investigations and boreholes in Quaternary deposits, and data on the hydrogeological properties of the bedrock. The conceptual and descriptive modelling includes an identification and basic description of type areas, domains and interfaces between domains within the model area. The surface and near-surface flow system is described, including the assignment of hydrogeological properties to HSDs (Hydraulic Soil Domains) of Quaternary deposits based on a

Description of climate, surface hydrology, and near-surface hydrogeology. Simpevarp 1.2

Energy Technology Data Exchange (ETDEWEB)

Werner, Kent [SWECO VIAK AB/Golder Associates AB, Stockholm (Sweden); Bosson, Emma; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

2005-04-01

This report presents and evaluates the site investigations and primary data on meteorology, surface hydrology and near-surface hydrogeology that are available in the Simpevarp 1.2 'data freeze'. The main objective is to update the previous Simpevarp 1.1 description of the meteorological, surface hydrological and near-surface hydrogeological conditions in the Simpevarp area. Based on the Simpevarp 1.2 dataset, an updated conceptual and descriptive model of the surface and near-surface water flow conditions in the Simpevarp area is presented. In cases where site investigation data are not yet available, regional and/or generic data are used as input to the modelling. GIS- and process-based tools, used for initial quantitative flow modelling, are also presented. The objectives of this initial quantitative modelling are to illustrate, quantify and support the site descriptive model, and also to produce relevant input data to the ecological systems modelling within the SKB SurfaceNet framework.For the Simpevarp 1.2 model, the relevant site investigations include the establishment of one local meteorological station and surface-hydrological stations for discharge measurements, delineation and description of catchment areas, manual discharge measurements in water courses, slug tests in groundwater monitoring wells, and manual groundwater level measurements. In addition, other investigations have also contributed to the modelling, providing data on geometry (including topography), data from surface-based geological investigations and boreholes in Quaternary deposits, and data on the hydrogeological properties of the bedrock. The conceptual and descriptive modelling includes an identification and basic description of type areas, domains and interfaces between domains within the model area. The surface and near-surface flow system is described, including the assignment of hydrogeological properties to HSDs (Hydraulic Soil Domains) of Quaternary deposits based on a

Neuroscience Knowledge Among Athletic Training Professional Programs

Directory of Open Access Journals (Sweden)

Douglas M. Seavey

2016-05-01

Full Text Available The Journal of Sports Medicine & Allied Health Sciences, 2016;2(1 ISSN: 2376-9289 Seavey, Beatty, Lenhoff, & Krause. Neuroscience Knowledge Among Athletic Training Professional Programs Neuroscience Knowledge Among Athletic Training Professional Programs Douglas M. Seavey, AT, Christopher T. Beatty, Tyler L. Lenhoff, & Bentley A. Krause, PhD, AT Ohio University, College of Health Sciences & Professions, Division of Athletic Training. ____________________________________________________________________ Context: Athletic trainers (ATs, more than any other healthcare professional, has expertise in areas of on-field assessment and management of sport related concussion and spinal cord injury. A search of the key words “brain” (n=>100 or “spinal cord/spine” (n=~50 were identified in National Athletic Trainers’ Association Position Statements on Concussion and Spinal Cord Injury. However, a significant gap exists in the basic science knowledge of neuroscience and neuroanatomy. Objective: The goal of this study is to identify the basic science coursework in professional and post-professional athletic training curricula. Design and Setting: This is a descriptive, curricula analysis of CAATE Professional and Post-Professional Athletic Training Programs using web-based search and review. Participants: Curricula for accredited Professional (n=336 and Post-Professional (n=15 Athletic Training Programs were reviewed and analyzed to characteristics basic science content. Interventions: This web-based program review of CAATE standard course content and elective options occurred. Main Outcome Measures: Course titles, numbers and descriptions were accessed at CAATE.net and offerings of anatomy, gross anatomy, neuroanatomy and neuroscience, human physiology, exercise physiology, psychology, chemistry and physics content were quantified. Main outcome measures include frequencies and distributions of courses in each subject area. Results: We reviewed 309

NCRP Program Area Committee 3: Nuclear and Radiological Security and Safety.

Science.gov (United States)

Taylor, Tammy P; Buddemeier, Brooke

2016-02-01

Program Area Committee (PAC) 3 provides guidance and recommendations for response to nuclear and radiological incidents of both an accidental and deliberate nature. Leadership of PAC 3 was transitioned in March 2015, and the newly composed PAC has been working to delineate and then prioritize the landscape of possible activities for PAC 3. The major activity of PAC 3 during the past year was the establishment of Scientific Committee 3-1 to begin producing a report on Guidance for Emergency Responder Dosimetry.

GRI's Devonian Shales Research Program

International Nuclear Information System (INIS)

Guidry, F.K.

1991-01-01

This paper presents a summary of the key observations and conclusions from the Gas Research Institute's (GRI's) Comprehensive Study Well (CSW) research program conducted in the Devonian Shales of the Appalachian Basin. Initiated in 1987, the CSW program was a series of highly instrumented study wells drilled in cooperation with industry partners. Seven wells were drilled as part of the program. Extensive data sets were collected and special experiments were run on the CSW's in addition to the operator's normal operations, with the objectives of identifying geologic production controls, refining formation evaluation tools, and improving reservoir description and stimulation practices in the Devonian Shales. This paper highlights the key results from the research conducted in the CSW program in the areas of geologic production controls, formation evaluation, stimulation and reservoir engineering, and field operations. The development of geologic, log analysis, and reservoir models for the Shales from the data gathered and analysis, and reservoir models for the Shales from the data gathered and analyzed during the research is discussed. In addition, on the basis of what was learned in the CSW program, GRI's plans for new research in the Devonian Shales are described

Status of the joint United States/Japanese criticality data development program for the Fast Breeder fuel cycle

International Nuclear Information System (INIS)

Takeda, H.; Kishimoto, Y.; Matsumoto, T.; Haire, M.J.

1987-01-01

An experimental program is described to accumulate the basic criticality data on uranium-plutonium aqueous solution systems, including pin and water systems. This experimental program, managed by the Consolidated Fuel Reprocessing Program, utilized existing critical experiment facilities. However, Japan at least for the near future, does not have a facility for conducting critical experiments where fissible solution can be treated and processed. Therefore, Japan has remoted the existing US experimental program as well as enlarged the program so that a close cooperative relationship may exist in this area. This paper is an update of a description of the program presented in September 1985. 9 refs., 5 figs., 1 tab

Interim reliability-evaluation program: analysis of the Browns Ferry, Unit 1, nuclear plant. Appendix B - system descriptions and fault trees

International Nuclear Information System (INIS)

Mays, S.E.; Poloski, J.P.; Sullivan, W.H.; Trainer, J.E.; Bertucio, R.C.; Leahy, T.J.

1982-07-01

This report describes a risk study of the Browns Ferry, Unit 1, nuclear plant. The study is one of four such studies sponsored by the NRC Office of Research, Division of Risk Assessment, as part of its Interim Reliability Evaluation Program (IREP), Phase II. This report is contained in four volumes: a main report and three appendixes. Appendix B provides a description of Browns Ferry, Unit 1, plant systems and the failure evaluation of those systems as they apply to accidents at Browns Ferry. Information is presented concerning front-line system fault analysis; support system fault analysis; human error models and probabilities; and generic control circuit analyses

On the inclusion of the interfacial area between phases in the physical and mathematical description of subsurface multiphase flow. 1998 annual progress report

International Nuclear Information System (INIS)

Gray, W.G.; Soll, W.E.; Tompson, A.

1998-01-01

'Improved capabilities for modeling multiphase flow in the subsurface requires that several aspects of the system which impact the flow and transport processes be more properly accounted for. A distinguishing feature of multiphase flow in comparison to single phase flow is the existence of interfaces between fluids. At the microscopic (pore) scale, these interfaces are known to influence system behavior by supporting non-zero stresses such that the pressures in adjacent phases are not equal. In problems of interphase transport at the macroscopic (core) scale, knowledge of the total amount of interfacial area in the system provides a clue to the effectiveness of the communication between phases. Although interfacial processes are central to multiphase flow physics, their treatment in traditional porous-media theories has been implicit rather than explicit; and no attempts have been made to systematically account for the evolution of the interfacial area in dynamic systems or to include the dependence of constitutive functions, such as capillary pressure, on the interfacial area. This project implements a three-pronged approach to assessing the importance of various features of multiphase flow to its description. The research contributes to the improved understanding and precise physical description of multiphase subsurface flow by combining: (1) theoretical derivation of equations, (2) lattice Boltzmann modeling of hydrodynamics to identify characteristics and parameters, and (3) solution of the field-scale equations using a discrete numerical method to assess the advantages and disadvantages of the complete theory. This approach includes both fundamental scientific inquiry and a path for inclusion of the scientific results obtained in a technical tool that will improve assessment capabilities for multiphase flow situations that have arisen due to the introduction of organic materials in the natural environment. This report summarizes work after 1.5 years of a 3

U.S. Department of Energy, Carlsbad Area Office quality assurance program document. Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

Mission of the Carlsbad Area Office (CAO) is to protect human health and the environment by opening and operating the Waste Isolation Pilot Plant (WIPP) for safe disposal of TRU waste, and establishing an effective system for management of TRU waste from generation to disposal. To help in fulfilling this mission and to ensure that risks and environmental impacts are identified and minimized, and that safety, reliability, and performance are optimized, CAO`s policy is to establish and maintain an effective quality assurance (QA) program that supports compliance with applicable Federal, State, and local regulations, and DOE orders and requirements. This document establishes QA program requirements for all programs, projects, and activities sponsored by CAO.

[Based on the incidence of Creutzfeldt-Jakob disease in the Lanzarote healthcare area. Description of two definitive cases].

Science.gov (United States)

Hernández-Ramos, F J; Martínez Martín, M; Esteban Robayna, M; Jensen Toll, F; Palacios Llopis, S

2005-01-01

We present two cases who have been diagnosed of definitive Creutzfeldt-Jakob disease in the health area of Lanzarote in the period January 2002 to January 2004. The two cases are presented with clinical description, complementary tests -- including electroencephalogram, 14-3-3 protein determination -- study of the prionic protein gene, and histopathologic findings. In this article, we try to show the importance of trying to reach a definitive diagnosis with the histopathologic study once there is clinical suspicion (a diagnosis that is probable or possible). In addition our cases show that communication between the clinical and the epidemiological coordinator of the regional community and the National Center of Epidemiology is very important. We refer to the clear growth in the incidence of the disease in the population of Lanzarote in the period above mentioned. Finally, we discuss whether this growth is or is not an isolated event.

Multidimensional nonlinear descriptive analysis

CERN Document Server

Nishisato, Shizuhiko

2006-01-01

Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

Impact of Char Livelihood Program (CLP of Char land Dwellers around the Char Areas in Sirajgonj District of Bangladesh

Directory of Open Access Journals (Sweden)

Mohammad Anamul Haque

2017-12-01

Full Text Available In an attempt to address the impact of Char Livelihood Program (CLP of Char land dwellers, this study is carried out to examine the livelihood and income generation activities of the people of Bangala Char in Sirajgonj District, due to intervention of Char Livelihood Program (CLP by the DFID of United Kingdom (UK. The research question of the study was whether and to what extent the Char Livelihood Program (CLP brings any changes in the livelihood and income generation activities of the people of Bangala Char. Two areas have been studied, one area is under the intervention of the project (Bangala Char as program intervention area another is not under the program intervention (Sonatoni Char as control area. Both areas have been chosen of the vicinity of similar characteristics and geographical location for the ease of addressing the problems and analytical comparison. The study uses semi-structured questionnaire for household interview both for the program intervention and the control area as random sampling basis. This study a total of 96 households’ interviews conducted of the study areas among them 48 households from Bangala Char and 48 households from the Sonatoni Char (control area. Primary data collected from house hold respondent and secondary data were used from published and unpublished sources. Four variables are access to land, income and assets , food security and vulnerability identified and the analysis shows that access to land resources among the char dwellers has established legal ownership and entitlement of land and resolve the crisis of permanent settlement which bring change in livelihood in terms of access to land resources to some extent. The islands of char dwellers are in general disadvantaged with respect to their mainland counterparts in terms of physical isolation and vulnerability to flooding and erosion have created seasonal migration and higher dependency on traditional money lenders for accessing credit supply

Early in-situ measurements program for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Wowak, W.E.

1979-06-01

The technical basis and description of measurements for the early in-situ measurements program at the WIPP are described and a proposed organizational structure is presented. Measurements are needed for verification of design predictions and also for a prelude to the main experiment program. The design verification measurements will be concentrated in the first shaft and the underground support and access areas. Early experiments will be concentrated in the test drifts on the storage horizons. Recommendations are made to DOE for appropriate division of responsibility among Bechtel, the technical support contractor, the instrumentation contractor, and Sandia

Dissemination of Chronic Disease Self-Management Education (CDSME Programs in the United States: Intervention Delivery by Rurality

Directory of Open Access Journals (Sweden)

Matthew Lee Smith

2017-06-01

Full Text Available Background: Alongside the dramatic increase of older adults in the United States (U.S., it is projected that the aging population residing in rural areas will continue to grow. As the prevalence of chronic diseases and multiple chronic conditions among adults continues to rise, there is additional need for evidence-based interventions to assist the aging population to improve lifestyle behaviors, and self-manage their chronic conditions. The purpose of this descriptive study was to identify the geospatial dissemination of Chronic Disease Self-Management Education (CDSME Programs across the U.S. in terms of participants enrolled, workshops delivered, and counties reached. These dissemination characteristics were compared across rurality designations (i.e., metro areas; non-metro areas adjacent to metro areas, and non-metro areas not adjacent to metro areas. Methods: This descriptive study analyzed data from a national repository including efforts from 83 grantees spanning 47 states from December 2009 to December 2016. Counts were tabulated and averages were calculated. Results: CDSME Program workshops were delivered in 56.4% of all U.S. counties one or more times during the study period. Of the counties where a workshop was conducted, 50.5% were delivered in non-metro areas. Of the 300,640 participants enrolled in CDSME Programs, 12% attended workshops in non-metro adjacent areas, and 7% attended workshops in non-metro non-adjacent areas. The majority of workshops were delivered in healthcare organizations, senior centers/Area Agencies on Aging, and residential facilities. On average, participants residing in non-metro areas had better workshop attendance and retention rates compared to participants in metro areas. Conclusions: Findings highlight the established role of traditional organizations/entities within the aging services network, to reach remote areas and serve diverse participants (e.g., senior centers. To facilitate growth in rural

Dissemination of Chronic Disease Self-Management Education (CDSME) Programs in the United States: Intervention Delivery by Rurality.

Science.gov (United States)

Smith, Matthew Lee; Towne, Samuel D; Herrera-Venson, Angelica; Cameron, Kathleen; Kulinski, Kristie P; Lorig, Kate; Horel, Scott A; Ory, Marcia G

2017-06-14

Background : Alongside the dramatic increase of older adults in the United States (U.S.), it is projected that the aging population residing in rural areas will continue to grow. As the prevalence of chronic diseases and multiple chronic conditions among adults continues to rise, there is additional need for evidence-based interventions to assist the aging population to improve lifestyle behaviors, and self-manage their chronic conditions. The purpose of this descriptive study was to identify the geospatial dissemination of Chronic Disease Self-Management Education (CDSME) Programs across the U.S. in terms of participants enrolled, workshops delivered, and counties reached. These dissemination characteristics were compared across rurality designations (i.e., metro areas; non-metro areas adjacent to metro areas, and non-metro areas not adjacent to metro areas). Methods : This descriptive study analyzed data from a national repository including efforts from 83 grantees spanning 47 states from December 2009 to December 2016. Counts were tabulated and averages were calculated. Results : CDSME Program workshops were delivered in 56.4% of all U.S. counties one or more times during the study period. Of the counties where a workshop was conducted, 50.5% were delivered in non-metro areas. Of the 300,640 participants enrolled in CDSME Programs, 12% attended workshops in non-metro adjacent areas, and 7% attended workshops in non-metro non-adjacent areas. The majority of workshops were delivered in healthcare organizations, senior centers/Area Agencies on Aging, and residential facilities. On average, participants residing in non-metro areas had better workshop attendance and retention rates compared to participants in metro areas. Conclusions : Findings highlight the established role of traditional organizations/entities within the aging services network, to reach remote areas and serve diverse participants (e.g., senior centers). To facilitate growth in rural areas

Clean Coal Technology Programs: Completed Projects (Volume 2)

Energy Technology Data Exchange (ETDEWEB)

Assistant Secretary for Fossil Energy

2003-12-01

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

Science.gov (United States)

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

Technical baseline description for in situ vitrification laboratory test equipment

International Nuclear Information System (INIS)

Beard, K.V.; Bonnenberg, R.W.; Watson, L.R.

1991-09-01

IN situ vitrification (ISV) has been identified as possible waste treatment technology. ISV was developed by Pacific Northwest Laboratory (PNL), Richland, Washington, as a thermal treatment process to treat contaminated soils in place. The process, which electrically melts and dissolves soils and associated inorganic materials, simultaneously destroys and/or removes organic contaminants while incorporating inorganic contaminants into a stable, glass-like residual product. This Technical Baseline Description has been prepared to provide high level descriptions of the design of the Laboratory Test model, including all design modifications and safety improvements made to data. Furthermore, the Technical Baseline Description provides a basic overview of the interface documents for configuration management, program management interfaces, safety, quality, and security requirements. 8 figs

Marshall Space Flight Center Faculty Fellowship Program

Science.gov (United States)

Six, N. F.; Damiani, R. (Compiler)

2017-01-01

The 2017 Marshall Faculty Fellowship Program involved 21 faculty in the laboratories and departments at Marshall Space Flight Center. These faculty engineers and scientists worked with NASA collaborators on NASA projects, bringing new perspectives and solutions to bear. This Technical Memorandum is a compilation of the research reports of the 2017 Marshall Faculty Fellowship program, along with the Program Announcement (Appendix A) and the Program Description (Appendix B). The research affected the following six areas: (1) Materials (2) Propulsion (3) Instrumentation (4) Spacecraft systems (5) Vehicle systems (6) Space science The materials investigations included composite structures, printing electronic circuits, degradation of materials by energetic particles, friction stir welding, Martian and Lunar regolith for in-situ construction, and polymers for additive manufacturing. Propulsion studies were completed on electric sails and low-power arcjets for use with green propellants. Instrumentation research involved heat pipes, neutrino detectors, and remote sensing. Spacecraft systems research was conducted on wireless technologies, layered pressure vessels, and two-phase flow. Vehicle systems studies were performed on life support-biofilm buildup and landing systems. In the space science area, the excitation of electromagnetic ion-cyclotron waves observed by the Magnetospheric Multiscale Mission provided insight regarding the propagation of these waves. Our goal is to continue the Marshall Faculty Fellowship Program funded by Center internal project offices. Faculty Fellows in this 2017 program represented the following minority-serving institutions: Alabama A&M University and Oglala Lakota College.

RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Volume II. Program implementation

International Nuclear Information System (INIS)

1976-06-01

A discussion is presented of the use of the RELAP4/MOD5 computer program in simulating the thermal-hydraulic behavior of light-water reactor systems when subjected to postulated transients such as a LOCA, pump failure, or nuclear excursion. The volume is divided into main sections which cover: (1) program description, (2) input data, (3) problem initialization, (4) user guidelines, (5) output discussion, (6) source program description, (7) implementation requirements, (8) data files, (9) description of PLOTR4M, (10) description of STH20, (11) summary flowchart, (12) sample problems, (13) problem definition, and (14) problem input

Development of meat cattle breeding under respecialization programs in the Gomel area [Belarus

International Nuclear Information System (INIS)

Karpenko, A.F.; Mostovenko, A.L.; Radchikov, V.F.; Tsaj, V.P.

2011-01-01

In the conditions of the Republic of Belarus there was studied scientific management of introduction of 8 programmes of meat cattle breeding in regions of radioactive pollution in Gomel region. In course of the realized study there were analyzed land areas of the local farms, degree of soil contamination with radionuclides, coefficients of radionuclide transfer into plants and animal husbandry products, rate of production volumes, structure of arable lands and main herds, economic indexes of realized activities, etc. Introduction of programs of development of meat cattle breeding in the polluted areas made it possible to increase both the total and pedigree stock in the Gomel area, to create industrial base for reproduction of livestock and a wide circulation of specialized meat livestock in other farms of the polluted regions

Standarized input for Hanford environmental impact statements. Part II: site description

Energy Technology Data Exchange (ETDEWEB)

Jamison, J.D.

1982-07-01

Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act (NEPA).

An Evaluation of the Employee Training and Development Process for Nicolet Area Technical College's Basic Education Program.

Science.gov (United States)

Karl, Luis C.

The adult basic education (ABE) program at Nicolet Area Technical College (NATC) evaluated its training and development (T&D) process for new basic education instructors. The study gathered monitoring and screening criteria that addressed valuable components for use in an instrument for validating effectiveness of the ABE program (T&D)…

Educating change agents: a qualitative descriptive study of graduates of a Master's program in evidence-based practice.

Science.gov (United States)

Hole, Grete Oline; Brenna, Sissel Johansson; Graverholt, Birgitte; Ciliska, Donna; Nortvedt, Monica Wammen

2016-02-25

Health care professionals are expected to build decisions upon evidence. This implies decisions based on the best available, current, valid and relevant evidence, informed by clinical expertise and patient values. A multi-professional master's program in evidence-based practice was developed and offered. The aims of this study were to explore how students in this program viewed their ability to apply evidence-based practice and their perceptions of what constitute necessary conditions to implement evidence-based practice in health care organizations, one year after graduation. A qualitative descriptive design was chosen to examine the graduates' experiences. All students in the first two cohorts of the program were invited to participate. Six focus-group interviews, with a total of 21 participants, and a telephone interview of one participant were conducted. The data was analyzed thematically, using the themes from the interview guide as the starting point. The graduates reported that an overall necessary condition for evidence-based practice to occur is the existence of a "readiness for change" both at an individual level and at the organizational level. They described that they gained personal knowledge and skills to be "change-agents" with "self-efficacy, "analytic competence" and "tools" to implement evidence based practice in clinical care. An organizational culture of a "learning organization" was also required, where leaders have an "awareness of evidence- based practice", and see the need for creating "evidence-based networks". One year after graduation the participants saw themselves as "change agents" prepared to improve clinical care within a learning organization. The results of this study provides useful information for facilitating the implementation of EBP both from educational and health care organizational perspectives.

75 FR 52010 - Land and Water Conservation Fund Description and Notification, Performance Reports, Agreements...

Science.gov (United States)

2010-08-24

... DEPARTMENT OF THE INTERIOR National Park Service Land and Water Conservation Fund Description and.... SUPPLEMENTARY INFORMATION: The Land and Water Conservation Fund Act of 1965 (LWCF Act) (16 U.S.C 4601-4 et seq... for this program: 1. Description and Notification Form Title: Land and Water Conservation Fund...

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

Description of the KEEP Reading Curriculum, 1975-76. Technical Report No. 43.

Science.gov (United States)

Au, Kathryn H.

The Kamehameha Early Education Program (KEEP) is a research and development program designed to develop, demonstrate, and disseminate methods for improving the education of Hawaiian and part-Hawaiian children; this report contains a description of the reading curriculum used in the KEEP demonstration school during the 1975-76 school year. The…

Proceedings of the of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010)

DEFF Research Database (Denmark)

Brabrand, Claus

2010-01-01

-Louis Giavitto ("A Domain Specific Language for Complex Natural & Artificial Systems Simulations") and the 11 contributed papers that were selected for presentation and the proceedings by the programme committee from 30 submissions (i.e., 37% acceptance rate). Every submission was reviewed by at least three......This volume contains the proceedings of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010), held in Paphos, Cyprus on March 28--29, 2010. LDTA is a two-day satellite event of ETAPS (European Joint Conferences on Theory and Practice of Software) organized in cooperation...... with ACM Sigplan. LDTA is an application and tool-oriented forum on meta programming in a broad sense. A meta program is a program that takes other programs as input or output. The focus of LDTA is on generated or otherwise efficiently implemented meta programs, possibly using high level descriptions...

Subsurface Conditions Description of the B and BX and BY Waste Management Area

Energy Technology Data Exchange (ETDEWEB)

WOOD, M.I.

2000-03-13

This document provides a discussion of the subsurface conditions relevant to the occurrence and migration of contaminants in the vadose zone and groundwater underlying the 241-B, -BX, and -BY tank farms. This document provides a concise summary of existing information in support of characterization planning. This document includes a description of the available environmental contamination data and a limited, qualitative interpretation of these data.

Subsurface Conditions Description of the B and BX and BY Waste Management Area

International Nuclear Information System (INIS)

WOOD, M.I.

2000-01-01

This document provides a discussion of the subsurface conditions relevant to the occurrence and migration of contaminants in the vadose zone and groundwater underlying the 241-B, -BX, and -BY tank farms. This document provides a concise summary of existing information in support of characterization planning. This document includes a description of the available environmental contamination data and a limited, qualitative interpretation of these data

FED, Geometry Input Generator for Program TRUMP

International Nuclear Information System (INIS)

Schauer, D.A.; Elrod, D.C.

1996-01-01

1 - Description of program or function: FED reduces the effort required to obtain the necessary geometric input for problems which are to be solved using the heat-transfer code, TRUMP (NESC 771). TRUMP calculates transient and steady-state temperature distributions in multidimensional systems. FED can properly zone any body of revolution in one, or three dimensions. 2 - Method of solution: The region of interest must first be divided into areas which may consist of a common material. The boundaries of these areas are the required FED input. Each area is subdivided into volume nodes, and the geometrical properties are calculated. Finally, FED connects the adjacent nodes to one another, using the proper surface area, interface distance, and, if specified, radiation form factor and interface conductance. 3 - Restrictions on the complexity of the problem: Rectangular bodies can only be approximated by using a very large radius of revolution compared to the total radial thickness and by considering only a small angular segment in the circumferential direction

Safe-Taipei a Program Project for Strong Motions, Active Faults, and Earthquakes in the Taipei Metropolitan Area

Science.gov (United States)

Wang, Jeen-Hwa

Strong collision between the Eurasian and Philippine Sea Plates causes high seismicity in the Taiwan region, which is often attacked by large earthquakes. Several cities, including three mega-cities, i.e., Taipei, Taichung, and Kaoshung, have been constructed on western Taiwan, where is lying on thick sediments. These cities, with a high-population density, are usually a regional center of culture, economics, and politics. Historically, larger-sized earthquakes, e.g. the 1935 Hsingchu—Taichung earthquake and the 1999 Chi—Chi earthquake, often caused serious damage on the cities. Hence, urban seismology must be one of the main subjects of Taiwan's seismological community. Since 2005, a program project, sponsored by Academia Sinica, has been launched to investigate seismological problems in the Taipei Metropolitan Area. This program project is performed during the 2005—2007 period. The core research subjects are: (1) the deployment of the Taipei Down-hole Seismic Array; (2) the properties of earthquakes and active faults in the area; (3) the seismogenic-zone structures, including the 3-D velocity and Q structures, of the area; (4) the characteristics of strong-motions and sites affects; and (5) strong-motion prediction. In addition to academic goals, the results obtained from the program project will be useful for seismic hazard mitigation not only for the area but also for others.

Regulatory research and support program for 1989/90

International Nuclear Information System (INIS)

1989-01-01

The Regulatory Research and Support Program is intended to augment and extend the Atomic Energy Control Board's regulatory program beyond the capability of in-house resources. The overall objective of the research and support program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating nuclear energy. The program is divided into eight main areas of research covering the safety of nuclear facilities, radioactive waste management, health physics, physical security and the development of regulatory processes. A total of 83 projects are planned for 1989/90, including a number which are ongoing from the previous fiscal year. Projects that are held in reserve in case funding becomes available are also listed. Most of the projects will be carried out under contracts issued through the Department of Supply and Services. This Information Bulletin contains a list of the projects with a brief description of each, and additional supporting information

Radioactive mineral occurrences in the Bancroft area

Energy Technology Data Exchange (ETDEWEB)

Satterly, J

1958-12-31

The report summarizes three years of field work conducted in the Bancroft area investigating occurrences of radioactive minerals, and also includes accounts of properties in the area for which drill logs and survey reports have been filed. It begins with a history of exploration and development of radioactive mineral deposits in the area, a review of the area`s general geology (Grenville metasediments, plutonic rocks), and general descriptions of the types of radioactive mineral deposits found in the area (deposits in granitic and syenitic bodies, metasomatic deposits in limy rocks, hydrothermal deposits). It also describes the mineralogy of radioactive minerals found in the area and the Geiger counter technique used in the investigation. The bulk of the report consists of descriptions of radioactive mineral properties and mine workings, containing (where available) information on exploration history, general and economic geology, and production.

Advisory processes and their descriptive data

Directory of Open Access Journals (Sweden)

Milan Mišovič

2005-01-01

Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

Mississippi Curriculum Framework for Welding and Cutting Programs (Program CIP: 48.0508--Welder/Welding Technologist). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the welding and cutting programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Conceptual modular description of the high-level waste management system for system studies model development

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1992-08-01

This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions

Graphic Interface for LCP2 Optimization Program

DEFF Research Database (Denmark)

Nicolae, Taropa Laurentiu; Gaunholt, Hans

1998-01-01

This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...... of the project. The program is written in Visual C++5.0 on a Windows NT4.0 operating system.......This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

XML Translator for Interface Descriptions

Science.gov (United States)

Boroson, Elizabeth R.

2009-01-01

A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

The advanced controls program at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Knee, H.E.; White, J.D.

1990-01-01

The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the ''Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor [ALWR] and high temperature gas-cooled reactor [HTGR] designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R ampersand D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs

Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-12-15

A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

International Nuclear Information System (INIS)

Follin, Sven; Stigsson, Martin; Svensson, Urban

2005-12-01

A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

Transportation Problems in Special Education Programs in Rural Areas - A Specific Solution and Some Suggestions for Delivery System Development.

Science.gov (United States)

Brody, Z. H.

The paper describes transportation problems encountered and solutions employed in delivering systems of comprehensive services to handicapped children in Anderson County, Tennessee, a predominantly rural area with considerable mountain area. Detailed are methods of transportation utilized in the four different program areas of the county special…

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

Optimization of planting pattern plan in Logung irrigation area using linear program

Science.gov (United States)

Wardoyo, Wasis; Setyono

2018-03-01

Logung irrigation area is located in Kudus Regency, Central Java Province, Indonesia. Irrigation area with 2810 Ha of extent is getting water supply from Logung dam. Yet, the utilization of water at Logung dam is not optimal and the distribution of water is still not evenly distributed. Therefore, this study will discuss about the optimization of irrigation water utilization based on the beginning of plant season. This optimization begins with the analysis of hydrology, climatology and river discharge in order to determine the irrigation water needs. After determining irrigation water needs, six alternatives of planting patterns with the different early planting periods, i.e. 1st November, 2nd November, 3rd November, 1st December, 2nd December, and 3rd December with the planting pattern of rice-secondary crop-sugarcane is introduced. It is continued by the analysis of water distribution conducted using linear program assisted by POM-Quantity method for Windows 3 with the reliable discharge limit and the available land area. Output of this calculation are to determine the land area that can be planted based on the type of plant and growing season, and to obtaine the profits of harvest yields. Based on the optimum area of each plant species with 6 alternatives, the most optimum area was obtained at the early planting periods on 3rd December with the production profit of Rp 113.397.338.854,- with the planting pattern of rice / beans / sugarcane-rice / beans / sugarcane-beans / sugarcane.

Implementing an Employee Assistance Program.

Science.gov (United States)

Gam, John; And Others

1983-01-01

Describes in detail the implementation of an employee assistance program in a textile plant. Reviews the historical development, referral process, and termination guidelines of the program and contains descriptive statistics for six periods of the program's operation. (Author/JAC)

Course Descriptions in Environmental Studies Part One: Historical Courses.

Science.gov (United States)

Hughes, Donald; And Others

1984-01-01

Presents descriptions (syllabi, outlines, goals) of selected environmental studies courses which approach the discipline from an historical and humanistic perspective. Areas explored in the courses include human ecology, American environmental history, environmental politics, and others. (JN)

Hanford Site Groundwater Protection Management Program: Revision 1

International Nuclear Information System (INIS)

1993-11-01

Groundwater protection is a national priority that is promulgated in a variety of environmental regulations at local, state, and federal levels. To effectively coordinate and ensure compliance with applicable regulations, the US Department of Energy has issued DOE Order 5400.1 (now under revision) that requires all US Department of Energy facilities to prepare separate groundwater protection program descriptions and plans. This document describes the Groundwater Protection Management Program for the Hanford Site located in the state of Washington. DOE Order 5400.1 specifies that the Groundwater Protection Management Program cover the following general topical areas: (1) documentation of the groundwater regime, (2) design and implementation of a groundwater monitoring program to support resource management and comply with applicable laws and regulations, (3) a management program for groundwater protection and remediation, (4) a summary and identification of areas that may be contaminated with hazardous waste, (5) strategies for controlling these sources, (6) a remedial action program, and (7) decontamination and decommissioning and related remedial action requirements. Many of the above elements are covered by existing programs at the Hanford Site; thus, one of the primary purposes of this document is to provide a framework for coordination of existing groundwater protection activities. Additionally, it describes how information needs are identified and can be incorporated into existing or proposed new programs. The Groundwater Protection Management Program provides the general scope, philosophy, and strategies for groundwater protection/management at the Hanford Site. Subtier documents provide the detailed plans for implementing groundwater-related activities and programs. Related schedule and budget information are provided in the 5-year plan for environmental restoration and waste management at the Hanford Site

Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

Science.gov (United States)

Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-08-15

Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

Evaluation of otolaryngology residency program websites.

Science.gov (United States)

Svider, Peter F; Gupta, Amar; Johnson, Andrew P; Zuliani, Giancarlo; Shkoukani, Mahdi A; Eloy, Jean Anderson; Folbe, Adam J

2014-10-01

Prior to applying or interviewing, most prospective applicants turn to the Internet when evaluating residency programs, making maintenance of a comprehensive website critical. While certain "intangibles" such as reputation may not be communicated effectively online, residency websites are invaluable for conveying other aspects of a program. Prior analyses have reported that certain criteria such as research experience and didactics are important considerations for applicants. To evaluate the comprehensiveness of otolaryngology residency websites. Review of otolaryngology residency program websites. Websites of 99 civilian residency programs were searched for the presence of 23 criteria. Presence of 23 criteria for application process, incentives, instruction, research, clinical training, and other. Only 5 programs contained at least three-quarters of the criteria analyzed; on average programs reported less than 50% of information sought. Among the 99 residency program websites, a description of the following criteria was noted: comprehensive faculty listing (88%), didactics (80%), contact e-mail (77%), current residents (74%), description of facilities (70%), intern schedule (70%), research requirements (69%), otolaryngology rotation schedule (64%), other courses (61%), ERAS (Electronic Residency Application Service) link (55%), year-to-year responsibility progression (47%), call schedule (40%), active/past research projects (37%), area information (34%), message from the program director (33%) or chair (23%), selection criteria (30%), salary (directly on site) (23%), surgical statistics (18%), parking (9%), and meal allowance (7%). The mean (SD) percentage present of factors encompassing "clinical training" was 55% (23%), significantly higher than the mean (SD) percentage of factors covered under the "incentives" category (19% [11%]; P = .01). The proportion of overall criteria present on websites did not differ on organizing programs by region (range, 42

Radioecological modelling of the biosphere as illustrated by the example of the model area Oberbauenstock

International Nuclear Information System (INIS)

Boehringer, J.; Fritschi, M.; Schwanner, I.; Resele, G.

1986-06-01

The biosphere model is the final link in the chain of radionuclide transport models used for radiation dose calculations for nuclear waste repositories. The dispersion of radionuclides from a low and intermediate level waste repository in the biosphere and their uptake by man through food pathways is investigated with a compartment model. The relevant biosphere parameters were based on the model site at Oberbauenstock and compiled as a model data set for further use in the biosphere modelling. Nuclide concentrations in the biosphere compartments and foodstuffs as well as annual individual radiation doses are calculated with the computer program BIOSPH. The present report contains a description of the model area and its subdivision into 4 compartments, a compilation of the relevant parameters and the simplifying assumptions that have been made, discussion of mathematical modelling of nuclide transport in the biosphere and of the calculation of the individual radiation doses, a technical description of the computer program BIOSPH and a detailed presentation of the results from the model calculations. (author)

Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

Addressing the Language Description Deficit

Directory of Open Access Journals (Sweden)

M. Ali Bolgiin

2010-01-01

Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

An Approach to Object Recognition: Aligning Pictorial Descriptions.

Science.gov (United States)

1986-12-01

PERFORMING 0RGANIZATION NAMIE ANDORS IS551. PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREKA A WORK UNIT NUMBERS ( 545 Technology... ARTIFICIAL INTELLIGENCE LABORATORY A.I. Memo No. 931 December, 1986 AN APPROACH TO OBJECT RECOGNITION: ALIGNING PICTORIAL DESCRIPTIONS Shimon Ullman...within the Artificial Intelligence Laboratory at the Massachusetts Institute of Technology. Support for the A.I. Laboratory’s artificial intelligence

Examination of Sign Language Education According to the Opinions of Members from a Basic Sign Language Certification Program

Science.gov (United States)

Akmese, Pelin Pistav

2016-01-01

Being hearing impaired limits one's ability to communicate in that it affects all areas of development, particularly speech. One of the methods the hearing impaired use to communicate is sign language. This study, a descriptive study, intends to examine the opinions of individuals who had enrolled in a sign language certification program by using…

'Even if we get one back here, it's worth it...': evaluation of an Australian Remote Area Health Placement Program.

Science.gov (United States)

Toussaint, Sandy; Mak, Donna B

2010-01-01

In 2006 the Kimberley Remote Area Health Placement Program (hereinafter the 'Program') was established at the University of Notre Dame's School of Medicine (Fremantle campus, Western Australia). The Program was developed as one of the strategies to achieve the School of Medicine's mission to graduate knowledgeable, skillful, dutiful and ethical doctors who will want to work in Australian areas of unmet need. The Program aims to immerse medical students in non-clinical settings to provide them with opportunities to learn life skills required for remote area living, and to introduce them to the myriad of socio-cultural, geographic, climatic and economic factors that impact on the health and wellbeing of remote area residents. To meet these objectives, the School organizes for students to live with, and do useful non-clinical work for, a host community or organization for up to one week. In 2008 the Program was evaluated to explore and assess its immediate and potential future benefits and limitations as perceived by Kimberley residents. This paper reports on the evaluation's findings via Kimberley-based narratives and raises some issues that are essential to training and retaining a 'bloody good doctor...' in a remote Australian setting. Using a mix of qualitative, ethnographic methods, the Program was evaluated by an independent researcher during four weeks of field research in late 2008. The methods included a survey, structured and unstructured interviewing and participant observation to elicit data. Thirty-three formal interviews of at least one hour's duration were conducted. Data were also collected via 15 informal discussions. Both formal and conservational interactions occurred in a range of town-based and more remote settings. The majority of persons consulted generally highlighted the Program's benefits. The reasons for this positive evaluation varied, but a common thread was that exposure to the Kimberley introduced the students to local life, a quality

Slope-Area Computation Program Graphical User Interface 1.0—A Preprocessing and Postprocessing Tool for Estimating Peak Flood Discharge Using the Slope-Area Method

Science.gov (United States)

Bradley, D. Nathan

2012-01-01

The slope-area method is a technique for estimating the peak discharge of a flood after the water has receded (Dalrymple and Benson, 1967). This type of discharge estimate is called an “indirect measurement” because it relies on evidence left behind by the flood, such as high-water marks (HWMs) on trees or buildings. These indicators of flood stage are combined with measurements of the cross-sectional geometry of the stream, estimates of channel roughness, and a mathematical model that balances the total energy of the flow between cross sections. This is in contrast to a “direct” measurement of discharge during the flood where cross-sectional area is measured and a current meter or acoustic equipment is used to measure the water velocity. When a direct discharge measurement cannot be made at a gage during high flows because of logistics or safety reasons, an indirect measurement of a peak discharge is useful for defining the high-flow section of the stage-discharge relation (rating curve) at the stream gage, resulting in more accurate computation of high flows. The Slope-Area Computation program (SAC; Fulford, 1994) is an implementation of the slope-area method that computes a peak-discharge estimate from inputs of water-surface slope (from surveyed HWMs), channel geometry, and estimated channel roughness. SAC is a command line program written in Fortran that reads input data from a formatted text file and prints results to another formatted text file. Preparing the input file can be time-consuming and prone to errors. This document describes the SAC graphical user interface (GUI), a crossplatform “wrapper” application that prepares the SAC input file, executes the program, and helps the user interpret the output. The SAC GUI is an update and enhancement of the slope-area method (SAM; Hortness, 2004; Berenbrock, 1996), an earlier spreadsheet tool used to aid field personnel in the completion of a slope-area measurement. The SAC GUI reads survey data

Area Health Education Center (AHEC) programs for rural and underrepresented minority students in the Alabama Black Belt.

Science.gov (United States)

Patel, Ashruta; Knox, Regina J; Logan, Alicia; Summerville, Katie

2017-01-01

This paper evaluated the implementation West Central Alabama Area Health Education Center programs for high school students in grades 9-12 through participant-reported evaluations and feedback during the  September 1st, 2013 to August 31st, 2014 fiscal year. The programs targeted racial/ethnic minorities and/or rural individuals interested in pursuing a career as a healthcare provider in medically underserved counties of Alabama. Students participated in enrichment activities related to prospective health careers that included: successful college preparedness, knowledge about health careers, and the types of primary care health professions that are needed in underserved Alabama communities. The curriculum studied 593 (ACT preparation: n  = 172, AHEC 101: n  = 56, FAFSA: n  = 109, Health Career Exploration: n  = 159, College Career Readiness: n  = 67, Dixie Scholars NERD: n  = 30) baseline measures for the programs to evaluate effectiveness when rated by participants both quantitatively and qualitatively. Interactive activities with video incorporation, hands-on experiences, and group discussions paired with student motivation and interest in specific health career-related activities provided the highest program ratings. It is important to use a variety of successful program strategies when forming healthcare workforce development interventions. Student evaluations can help adapt methods for future program implementation to ultimately achieve strategies for health professional recruitment, training, and retention in areas that lack access to quality healthcare.

Course Descriptions in Environmental Studies Part Two: Interdisciplinary Courses.

Science.gov (United States)

Dunlap, Riley; And Others

1984-01-01

Presents descriptions (syllabi, outlines, goals) of interdisciplinary environmental studies courses. Topic areas of these courses include: environmental sociology; human ecology (politics, institutions, and the environment); humans and the environment in historical perspective; environmental management; humans, hazards, and disasters; and other…

Description of work for routine groundwater sampling at the Environmental Restoration Disposal Facility

International Nuclear Information System (INIS)

Ford, B.H.

1996-09-01

This document provides a description of work and field implementation guidance for routine (post-baseline) groundwater monitoring sampling program at the Environmental Restoration Disposal Facility. The purpose of this program is to (1) meet the intent of the applicable or relevant and appropriate requirements; (2) document baseline groundwater conditions; (3) monitor those conditions for change; and (4) allow for modifications to groundwater sampling if required by the leachate management program

Site description of Forsmark at completion of the site investigation phase. SDM-Site Forsmark

Energy Technology Data Exchange (ETDEWEB)

2008-12-15

The Swedish Nuclear Fuel and Waste Management Co., SKB, has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the model is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model for geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site, presents an integrated understanding of the Forsmark area at the completion of the surface-based investigations, which were conducted at Forsmark during the period 2002 to 2007. It also provides a summary of the abundant underlying data and the discipline-specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details in data analyses and modelling in the different disciplines. The Forsmark area is located in northern Uppland within the municipality of Oesthammar, about 120 km north of Stockholm. The candidate area for site investigation is located along the shoreline of Oeregrundsgrepen, within the north-western part of a major tectonic lens that formed between 1.87 and 1.85 billion years ago during the Svecokarelian orogeny. The candidate area is approximately 6 km long and 2 km wide. The

Site description of Forsmark at completion of the site investigation phase. SDM-Site Forsmark

International Nuclear Information System (INIS)

2008-12-01

The Swedish Nuclear Fuel and Waste Management Co., SKB, has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the model is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model for geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site, presents an integrated understanding of the Forsmark area at the completion of the surface-based investigations, which were conducted at Forsmark during the period 2002 to 2007. It also provides a summary of the abundant underlying data and the discipline-specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details in data analyses and modelling in the different disciplines. The Forsmark area is located in northern Uppland within the municipality of Oesthammar, about 120 km north of Stockholm. The candidate area for site investigation is located along the shoreline of Oeregrundsgrepen, within the north-western part of a major tectonic lens that formed between 1.87 and 1.85 billion years ago during the Svecokarelian orogeny. The candidate area is approximately 6 km long and 2 km wide. The

Environmental resources of selected areas of Hawaii: Cultural environment and aesthetic resources

Energy Technology Data Exchange (ETDEWEB)

Trettin, L.D. [Univ. of Tennessee (United States); Petrich, C.H.; Saulsbury, J.W. [Oak Ridge National Lab., TN (United States)

1996-01-01

This report has been prepared to make available and archive the background scientific data and related information collected on the cultural environment and aesthetic resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The cultural environment in the Geothermal Resource Zone (GRZ) and associated study area consists of Native Hawaiian cultural and religious practices and both Native Hawaiian and non-Native Hawaiian cultural resources. This report consists of three sections: (1) a description of Native Hawaiian cultural and religious rights, practices, and values; (2) a description of historic, prehistoric, and traditional Native Hawaiian sites; and (3) a description of other (non-native) sites that could be affected by development in the study area. Within each section, the level of descriptive detail varies according to the information currently available. The description of the cultural environment is most specific in its coverage of the Geothermal Resource Subzones in the Puna District of the island of Hawaii and the study area of South Maui. Ethnographic and archaeological reports by Cultural Advocacy Network Developing Options and International Archaeological Research Institute, Inc., respectively, supplement the descriptions of these two areas with new information collected specifically for this study. Less detailed descriptions of additional study areas on Oahu, Maui, Molokai, and the island of Hawaii are based on existing archaeological surveys.

Individual- and area-level disparities in access to the road network, subway system and a public bicycle share program on the Island of Montreal, Canada.

Science.gov (United States)

Fuller, Daniel; Gauvin, Lise; Kestens, Yan

2013-02-01

Few studies have examined potential disparities in access to transportation infrastructures, an important determinant of population health. To examine individual- and area-level disparities in access to the road network, public transportation system, and a public bicycle share program in Montreal, Canada. Examining associations between sociodemographic variables and access to the road network, public transportation system, and a public bicycle share program, 6,495 adult respondents (mean age, 48.7 years; 59.0 % female) nested in 33 areas were included in a multilevel analysis. Individuals with lower incomes lived significantly closer to public transportation and the bicycle share program. At the area level, the interaction between low-education and low-income neighborhoods showed that these areas were significantly closer to public transportation and the bicycle share program controlling for individual and urbanicity variables. More deprived areas of the Island of Montreal have better access to transportation infrastructure than less-deprived areas.

RSYST - a short description of the modules

International Nuclear Information System (INIS)

Ruehle, R.

1976-04-01

The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

Operational Area Environmental Evaluations

Energy Technology Data Exchange (ETDEWEB)

Bailey-White, Brenda Eileen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nagy, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wagner, Katrina Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Goodman, Thomas Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herring, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Catechis, Christopher S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kinghorn, Aubrianna Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Ellie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Barthel, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Casaus, Benito [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-08-01

The Operational Area Environmental Evaluation update provides a description of activities that have the potential to adversely affect natural and cultural resources, including soil, air, water, biological, ecological, and historical resources. The environmental sensitivity of an area is evaluated and summarized, which may facilitate informed management decisions as to where development may be prohibited, restricted, or subject to additional requirements.

A directory of computer programs for assessment of radioactive waste disposal in geological formations

International Nuclear Information System (INIS)

Broyd, T.W.; Dean, R.B.; Hobbs, G.D.; Knowles, N.C.; Putney, J.M.; Wrigley, J.

1984-01-01

This Directory describes computer programs suitable for the assessment of radioactive waste disposal facilities in geological formations. The programs, which are mainly applicable to the post closure analysis of the repository, address combinations of the following topics: nuclide inventory, corrosion, leaching, geochemistry, stress analysis, heat transfer, groundwater flow and radionuclide transport. Biosphere modelling, surface water flow and risk analysis are not covered. A total of 248 programs are identified, of which 50 are reviewed in detail, 134 in summary and 64 in tabular fashion. The directory has been compiled using a combination of literature searches, telephone and postal correspondence and meetings with recognised experts in the respective areas of work covered. It differs from previous reviews of computer programs for similar topics areas in two main respects. Firstly, the method of obtaining information has resulted in program descriptions of considerable breadth and detail. Secondly, the Directory has concentrated wherever possible on European codes, whereas most previous work of this nature has looked solely at programs developed in North America. The reviews are presented in good faith, but it has not been possible to run any of the programs on a computer, and so truly objective comparisons may not be made. Finally, although the Directory is specific to the post-closure assessment of a repository site, some of the programs described could also be used in other areas of repository analysis (eg repository design)

The Colombian conflict: a description of a mental health program in the Department of Tolima

Directory of Open Access Journals (Sweden)

Grais Rebecca F

2009-12-01

Full Text Available Abstract Colombia has been seriously affected by an internal armed conflict for more than 40 years affecting mainly the civilian population, who is forced to displace, suffers kidnapping, extortion, threats and assassinations. Between 2005 and 2008, Médecins Sans Frontières-France provided psychological care and treatment in the region of Tolima, a strategic place in the armed conflict. The mental health program was based on a short-term multi-faceted treatment developed according to the psychological and psychosomatic needs of the population. Here we describe the population attending during 2005-2008, in both urban and rural settings, as well as the psychological treatment provided during this period and its outcomes. We observed differences between the urban and rural settings in the traumatic events reported, the clinical expression of the disorders, the disorders diagnosed, and their severity. Although the duration of the treatment was limited due to security reasons and access difficulties, patient condition at last visit improved in most of the patients. These descriptive results suggest that further studies should be conducted to examine the role of short-term psychotherapy, adapted specifically to the context, can be a useful tool to provide psychological care to population affected by an armed conflict.

A Modal Description of Multiport Antennas

Directory of Open Access Journals (Sweden)

Jonathan J. Lynch

2011-01-01

Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

A risk characterization of safety research areas for integral fast reactor program planning

International Nuclear Information System (INIS)

Mueller, C.J.; Cahalan, J.E.; Hill, D.J.; Kramer, J.M.; Marchaterre, J.F.; Pedersen, D.R.; Sevy, R.H.; Tibbrook, R.W.; Wei, T.Y.; Wright, A.E.

1988-01-01

This paper characterizes the areas of integral fast reactor (IFR) safety research in terms of their importance in addressing the risk of core disruption sequences for innovative designs. Such sequences have traditionally been determined to constitute the primary risk to public health and safety. All core disruption sequences are folded into four fault categories: classic unprotected (unscrammed) events; loss of decay heat; local fault propagation; and failure to critical reactor structures. Event trees are used to describe these sequences and the areas in the IFR safety and related base technology research programs are discussed with respect to their relevance in addressing the key issues in preventing or delimiting core disruptive sequences. Thus a measure of potential for risk reduction is obtained for guidance in establishing research priorities

A risk characterization of safety research areas for Integral Fast Reactor program planning

International Nuclear Information System (INIS)

Mueller, C.J.; Cahalan, J.E.; Hill, D.J.

1988-01-01

This paper characterizes the areas of Integral Fast Reactor (IFR) safety research in terms of their importance in addressing the risk of core disruption sequences for innovative designs. Such sequences have traditionally been determined to constitute the primary risk to public health and safety. All core disruption sequences are folded into four fault categories: classic unprotected (unscrammed) events; loss of decay heat; local fault propagation; and failure of critical reactor structures. Event trees are used to describe these sequences and the areas in the IFR Safety and related Base Technology research programs are discussed with respect to their relevance in addressing the key issues in preventing or delimiting core disruptive sequences. Thus a measure of potential for risk reduction is obtained for guidance in establishing research priorites

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

Manufacturing Educational Change: Impact Evaluation of the Lansing Area Manufacturing Partnership Pilot Program. Executive Summary.

Science.gov (United States)

MacAllum, Keith; Taylor, Susan Hubbard; Johnson, Amy Bell

The Lansing Area Manufacturing Partnership (LAMP) is an academically rigorous, business/labor-driven school-to-career program in Lansing, Michigan, that includes business, union, school, and parent partners and provides participating students with work-based learning experiences for 2.5 hours every day throughout their senior year. LAMP's…

The Radioactive Ion Beams in Brazil (RIBRAS) facility. Description, program, main results, future plans

Science.gov (United States)

Lépine-Szily, A.; Lichtenthäler, R.; Guimarães, V.

2014-08-01

RIBRAS (Radioactive Ion Beams in Brazil) is a facility installed at the Institute of Physics of the University of São Paulo (IFUSP), Brazil. The RIBRAS system consists of two superconducting solenoids and uses the "in-flight method" to produce radioactive ion beams using the primary beam provided by the 8UD Pelletron Tandem of IFUSP. The ion beams produced so far by RIBRAS are 6He, 8Li, 7Be, 10Be, 8B, 12B with intensities that can vary from 104 to 106 pps. Initially the experimental program covered the study of elastic and inelastic scattering with the objective to study the interaction potential and the reaction mechanisms between weakly bound (RIB) and halo (6He and 8B projectiles on light, medium and heavy mass targets. With highly purified beams, the study of resonant elastic scattering and resonant transfer reactions, using inverse kinematics and thick targets, has also been included in our experimental program. Also, transfer reactions of astrophysical interest and fusion reactions induced by halo nuclei are part of the near-future research program. Our recent results on elastic scattering, alpha-particle production and total reaction cross sections, as well as the resonant elastic and transfer reactions, are presented. Our plans for the near future are related to the installation of a new beam line and a cave for gamma-ray detection. We intend to place in operation a large area neutron detector available in our laboratory. The long-range plans could be the move of the RIBRAS system to the more energetic beam line of the LINAC post-accelerator (10MeV/nucleon primary beams) still in construction in our laboratory.

Ten years of work in Cuban Program to children from areas affected of Chernobyl accidents

International Nuclear Information System (INIS)

Garcia, Omar; Medina J, Julio

2001-01-01

In April of 2000 the Cuban program for specialised medical attention to children from areas affected by the radioactive contamination from the Chernobyl accident completed 10 years of work. In the program had been assisted more than 18 000 children and adults, among them 50 Brazilians related with the Goiania accident. A group of medical procedures and dosimetric, biomedical and psychological investigations have been carried out in the program. The main significant medical attention activities are the treatment of haematological disorders, among them, 120 leukaemia, the realisation of bone marrow transplants and the treatment of endocrinological and neoplasic illnesses. The dosimetric studies has allowed to create a database that accumulates information about internal contamination for 137Cs, internal, external, and total doses, of 7000 children. The analysis of the behaviour of all the medical information that is generated in the program in function of the contamination of the land and of the internal contamination of the children is also performed. The program has accumulated an experience of interest for physicians, psychologists and radiological emergencies experts.(author)

Fifteen years of the cuban program, with children from areas affected by the Chernobyl accident

International Nuclear Information System (INIS)

Garcia, Omar; Medina, Julio

2005-01-01

The Cuban Chernobyl Program arrived to the 15th anniversary in March 2005. This program was designed to offers specialised medical attention and to develop a rehabilitation plan with children from areas affected by the Chernobyl accident. More than 21 500 children and adults had been assisted in the program up to the moment, with a significant set of medical procedures done. Dosimetric and biomedic research had been also carried out as part of the program. The most significant medical attention activities include the treatment of children with haematological disorders, including 120 leukaemia, bone marrow transplants, and the treatment of endocrine and cancer diseases. The dosimetric studies allow made a data base with information on internal 137Cs contamination, internal, external and total doses, children living location, and its contamination by 137Cs, and other significant information for radiological impact evaluation in more than 8000 children. The behaviour of all the medical information of the program in relation to the contamination of the land and the internal contamination of the children was analysed using this database. The program has accumulated an experience of interest for physicians, psychologists and in general persons interested in Chernobyl consequences. This paper present a summary of the main results obtained in the program

California GAMA Program: A Contamination Vulnerability Assessment for the Bakersfield Area

International Nuclear Information System (INIS)

Moran, J E; Hudson, G B; Eaton, G F; Leif, R

2004-01-01

In response to concerns expressed by the California Legislature and the citizenry of the State of California, the State Water Resources Control Board (SWRCB), implemented a program to assess groundwater quality, and provide a predictive capability for identifying areas that are vulnerable to contamination. The program was initiated in response to concern over public supply well closures due to contamination by chemicals such as MTBE from gasoline, and solvents from industrial operations. As a result of this increased awareness regarding groundwater quality, the Supplemental Report of the 1999 Budget Act mandated the SWRCB to develop a comprehensive ambient groundwater-monitoring plan, and led to the initiation of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The primary objective of the GAMA Program is to assess the water quality and to predict the relative susceptibility to contamination of groundwater resources throughout the state of California. Under the GAMA program, scientists from Lawrence Livermore National Laboratory (LLNL) collaborate with the SWRCB, the U.S. Geological Survey (USGS), the California Department of Health Services (DHS), and the California Department of Water Resources (DWR) to implement this groundwater assessment program. In 2003, LLNL carried out this vulnerability study in the groundwater basin that underlies Bakersfield, in the southern San Joaquin Valley. The goal of the study is to provide a probabilistic assessment of the relative vulnerability of groundwater used for the public water supply to contamination from surface sources. This assessment of relative contamination vulnerability is made based on the results of two types of analyses that are not routinely carried out at public water supply wells: ultra low-level measurement of volatile organic compounds (VOCs), and groundwater age dating (using the tritium-helium-3 method). In addition, stable oxygen isotope measurements help determine the recharge water

Mississippi Curriculum Framework for Banking & Finance Technology (Program CIP: 52.0803--Banking and Related Financial Programs, Other). Postsecondary Programs.

Science.gov (United States)

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the banking and finance technology program. Presented in the introduction are a program description and suggested course sequence. Section I is a curriculum guide consisting of outlines for…

Financial incentives for return of service in underserved areas: a systematic review

Directory of Open Access Journals (Sweden)

Bärnighausen Till

2009-05-01

Full Text Available Abstract Background In many geographic regions, both in developing and in developed countries, the number of health workers is insufficient to achieve population health goals. Financial incentives for return of service are intended to alleviate health worker shortages: A (future health worker enters into a contract to work for a number of years in an underserved area in exchange for a financial pay-off. Methods We carried out systematic literature searches of PubMed, the Excerpta Medica database, the Cumulative Index to Nursing and Allied Health Literature, and the National Health Services Economic Evaluation Database for studies evaluating outcomes of financial-incentive programs published up to February 2009. To identify articles for review, we combined three search themes (health workers or students, underserved areas, and financial incentives. In the initial search, we identified 10,495 unique articles, 10,302 of which were excluded based on their titles or abstracts. We conducted full-text reviews of the remaining 193 articles and of 26 additional articles identified in reference lists or by colleagues. Forty-three articles were included in the final review. We extracted from these articles information on the financial-incentive programs (name, location, period of operation, objectives, target groups, definition of underserved area, financial incentives and obligation and information on the individual studies (authors, publication dates, types of study outcomes, study design, sample criteria and sample size, data sources, outcome measures and study findings, conclusions, and methodological limitations. We reviewed program results (descriptions of recruitment, retention, and participant satisfaction, program effects (effectiveness in influencing health workers to provide care, to remain, and to be satisfied with work and personal life in underserved areas, and program impacts (effectiveness in influencing health systems and health outcomes

Site description of Laxemar at completion of the site investigation phase. SDM-Site Laxemar

Energy Technology Data Exchange (ETDEWEB)

2009-12-15

The Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the SDM is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model of geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site Laxemar, presents an integrated understanding of the Laxemar-Simpevarp area (with special emphasis on the Laxemar subarea) at the completion of the surface-based investigations, which were conducted during the period 2002 to 2007. A summary is also provided of the abundant underlying data and the discipline specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details of the data analyses and modelling of the different disciplines. The Laxemar-Simpevarp area is located in the province of Smaaland within the municipality of Oskarshamn, about 230 km south of Stockholm. The candidate area for site investigation is located along the shoreline of the strait of Kalmarsund, within a 1.8 billion year old suite of well preserved bedrock belonging to the Transscandinavian Igneous Belt formed during

Site description of Laxemar at completion of the site investigation phase. SDM-Site Laxemar

International Nuclear Information System (INIS)

2009-12-01

The Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken site characterisation in two different areas, Forsmark and Laxemar-Simpevarp, in order to identify a suitable location for a geological repository of spent nuclear fuel according to the KBS-3 method. The site investigations have been conducted in campaigns, punctuated by data freezes. After each data freeze, the site data have been analysed and modelling has been carried out with the overall purpose to develop a site descriptive model (SDM). The site descriptive model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It is also essential for safety assessment, since the SDM is the only source for site-specific input. Another important use of the site descriptive model is in the environmental impact assessment. An SDM is an integrated model of geology, thermal properties, rock mechanics, hydrogeology, hydrogeochemistry, bedrock transport properties and a description of the surface system. The site descriptive model compiled in the current report, SDM-Site Laxemar, presents an integrated understanding of the Laxemar-Simpevarp area (with special emphasis on the Laxemar subarea) at the completion of the surface-based investigations, which were conducted during the period 2002 to 2007. A summary is also provided of the abundant underlying data and the discipline specific models that support the site understanding. The description relies heavily on background reports that address, in particular, details of the data analyses and modelling of the different disciplines. The Laxemar-Simpevarp area is located in the province of Smaaland within the municipality of Oskarshamn, about 230 km south of Stockholm. The candidate area for site investigation is located along the shoreline of the strait of Kalmarsund, within a 1.8 billion year old suite of well preserved bedrock belonging to the Transscandinavian Igneous Belt formed during

Liquid Metal Fast Breeder Reactor Program: Argonne facilities

International Nuclear Information System (INIS)

Stephens, S.V.

1976-09-01

The objective of the document is to present in one volume an overview of the Argonne National Laboratory test facilities involved in the conduct of the national LMFBR research and development program. Existing facilities and those under construction or authorized as of September 1976 are described. Each profile presents brief descriptions of the overall facility and its test area and data relating to its experimental and testing capability. The volume is divided into two sections: Argonne-East and Argonne-West. Introductory material for each section includes site and facility maps. The profiles are arranged alphabetically by title according to their respective locations at Argonne-East or Argonne-West. A glossary of acronyms and letter designations in common usage to describe organizations, reactor and test facilities, components, etc., involved in the LMFBR program is appended

Waste Management Systems Requirements and Descriptions (SRD)

International Nuclear Information System (INIS)

Conner, C.W.

1986-01-01

The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

Description of the CAREM Reactor Neutronic Calculation Codes

International Nuclear Information System (INIS)

Villarino, Eduardo; Hergenreder, Daniel

2000-01-01

In this work is described the neutronic calculation line used to design the CAREM reactor.A description of the codes used and the interfaces between the different programs are presented.Both, the normal calculation line and the alternative or verification calculation line are included.The calculation line used to obtain the kinetics parameters (effective delayed-neutron fraction and prompt-neutron lifetime) is also included