WorldWideScience

Sample records for program analysis environment

  1. Indoor Environment Program

    International Nuclear Information System (INIS)

    Daisey, J.M.

    1993-06-01

    This paper reports progress during the year 1992 in the Indoor Environment Program in the Energy and Environment Division of Lawrence Berkeley Laboratory. Studies in the following areas are reported: energy performance and ventilation in buildings; physical and chemical characterization of indoor air pollutants; indoor radon; indoor air quality; exposure to indoor air pollutants and risk analysis. Pollutants of particular interest include: radon; volatile, semi-volatile and particulate organic compounds; and combustion emissions including environmental tobacco smoke, carbon monoxide, and nitrogen oxides

  2. Multiprocessor programming environment

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.B.; Fornaro, R.

    1988-12-01

    Programming tools and techniques have been well developed for traditional uniprocessor computer systems. The focus of this research project is on the development of a programming environment for a high speed real time heterogeneous multiprocessor system, with special emphasis on languages and compilers. The new tools and techniques will allow a smooth transition for programmers with experience only on single processor systems.

  3. The Greenfoot Programming Environment

    Science.gov (United States)

    Kolling, Michael

    2010-01-01

    Greenfoot is an educational integrated development environment aimed at learning and teaching programming. It is aimed at a target audience of students from about 14 years old upwards, and is also suitable for college- and university-level education. Greenfoot combines graphical, interactive output with programming in Java, a standard, text-based…

  4. Virtual Environment Computer Simulations to Support Human Factors Engineering and Operations Analysis for the RLV Program

    Science.gov (United States)

    Lunsford, Myrtis Leigh

    1998-01-01

    The Army-NASA Virtual Innovations Laboratory (ANVIL) was recently created to provide virtual reality tools for performing Human Engineering and operations analysis for both NASA and the Army. The author's summer research project consisted of developing and refining these tools for NASA's Reusable Launch Vehicle (RLV) program. Several general simulations were developed for use by the ANVIL for the evaluation of the X34 Engine Changeout procedure. These simulations were developed with the software tool dVISE 4.0.0 produced by Division Inc. All software was run on an SGI Indigo2 High Impact. This paper describes the simulations, various problems encountered with the simulations, other summer activities, and possible work for the future. We first begin with a brief description of virtual reality systems.

  5. DNA Radiation Environments Program: Fall 1989 2-meter box experiments and analysis

    International Nuclear Information System (INIS)

    Santoro, R.T.

    1991-05-01

    This effort, sponsored by the Defense Nuclear Agency under the Radiation Environments Program, was carried out to obtain measured data for benchmarking MASH, the Monte Carlo Adjoint Code System. MASH was developed to replace the Vehicle Code System, VCS, that has been used by the Department of Defense and NATO for calculating neutron and gamma-ray radiation fields and shielding protection factors inside armored vehicles and structures from nuclear weapon radiation. Free-field data were obtained at distances of 170- and 400-meters from the APR while in-box measurements were made at 400 meters only. The box, included to obtain neutron and gamma-ray reduction factors, was a 2-meter cube configuration having 0.1016-m-thick steel walls. Calculated data were obtained using MASH by analysts from the Oak Ridge National Laboratory and Science Applications International Corporation. Calculated (C) results were compared with experimental (E) data in terms of C/E ratios. Free-field and in-box neutron kerma generally agreed within ±20%, although some C/E comparisons fell outside this range depending upon the detector against which the calculated data were compared. For those cases where the C/E ratio is marginal or unacceptable, problems in the detector systems were acknowledged to be principal cause of the discrepancy. Generally poor agreement (∼25-35%) was achieved among the C/E ratios for the free-field gamma-ray kerma at the 170- and 400-m locations while excellent (10%, or better) C/E values were obtained for the in-box conditions. The discrepancy for the free-field comparison was attributed to the failure by the analysts to include a tree line adjacent to the measurement site in the calculational geometry. C/E values for the neutron and gamma-ray reduction factors ranged from 1% to 23% depending on the detector. 4 refs., 2 figs., 14 tabs

  6. Service program package for processing and analysis of the data on the state of environment and public health

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Kornelyuk, V.A.; Kuz'menko, A.S.; Reznichenko, V.Yu.; Shestopalov, V.L.

    1984-01-01

    The problems related to the creation of universal service program packages (SPP) which are intended for processing the data on the state of environment and public health in the regions of large NPP dislocation are discussed. Peculiarities of the SSP, BMD and SENSOR SPPs as well as the ANGARA SPP developed on the base of the BMD and BMDP SPPs are considered. The ANGARA SPP is tested in the course of a large-scale medico-biological experiment, the purpose of which consisted in estimation of changes in the state of health of practically healthy people as bioindicator of slight changes in the environment. As a result of the analysis between 300 factors 45 most informative ones have been selected

  7. RIPE [robot independent programming environment]: A robot independent programming environment

    International Nuclear Information System (INIS)

    Miller, D.J.; Lennox, R.C.

    1990-01-01

    Remote manual operations in radiation environments are typically performed very slowly. Sensor-based computer-controlled robots hold great promise for increasing the speed and safety of remote operations; however, the programming of robotic systems has proven to be expensive and difficult. Generalized approaches to robot programming that reuse available software modules and employ programming languages which are independent of the specific robotic and sensory devices being used are needed to speed software development and increase overall system reliability. This paper discusses the robot independent programming environment (RIPE) developed at Sandia National Laboratories (SNL). The RIPE is an object-oriented approach to robot system architectures; it is a software environment that facilitates rapid design and implementation of complex robot systems for diverse applications. An architecture based on hierarchies of distributed multiprocessors provides the computing platform for a layered programming structure that models applications using software objects. These objects are designed to support model-based automated programming of robotic and machining devices, real-time sensor-based control, error handling, and robust communication

  8. Student performance in computing education: an empirical analysis of online learning in programming education environments

    Science.gov (United States)

    Xia, Belle Selene; Liitiäinen, Elia

    2017-11-01

    The benefits of using online exercises have been analysed in terms of distance learning, automatic assessment and self-regulated learning. In this study, we have not found a direct proportional relationship between student performance in the course exercises that use online technologies and the exam grades. We see that the average submission rate to these online exercises is not positively correlated with the exercise points. Yet, our results confirm that doing exercises along supports student learning and skill accumulation equipping them with the knowledge of programming. While the student performance in programming courses is affected by factors such as prior background in programming, cognitive skills and the quality of teaching, completing the course exercises via learning-by-doing is an indispensable part of teaching. Based on the student feedback from the course survey, the students are highly satisfied with using online technologies as part of learning.

  9. DMA Modern Programming Environment Study.

    Science.gov (United States)

    1980-01-01

    capabilities. The centers are becoming increasingly dependent upon the computer and digital data in the fulfillment of MC&G goals. Successful application...ftticrcsrccessors C140 by Herbert AlteroDigital Citmmuncaticns C141 0 Structuredl Design ’-:orkshocr by Ned Chapin KC 156o Digital Systems En17lrceriirg CC 139 o3...on a programming environment. The study, which resulted in production of a paper entitled An EXEC 8 Programming Support Libary , contends that most of

  10. The development of a program analysis environment for Ada: Reverse engineering tools for Ada

    Science.gov (United States)

    Cross, James H., II

    1991-01-01

    The Graphical Representations of Algorithms, Structures, and Processes for Ada (GRASP/Ada) has successfully created and prototyped a new algorithm level graphical representation for Ada software, the Control Structure Diagram (CSD). The primary impetus for creation of the CSD was to improve the comprehension efficiency of Ada software and thus improve reliability and reduce costs. The emphasis was on the automatic generation of the CSD from Ada source code to support reverse engineering and maintenance. The CSD has the potential to replace traditional prettyprinted Ada source code. In Phase 1 of the GRASP/Ada project, the CSD graphical constructs were created and applied manually to several small Ada programs. A prototype (Version 1) was designed and implemented using FLEX and BISON running under the Virtual Memory System (VMS) on a VAX 11-780. In Phase 2, the prototype was improved and ported to the Sun 4 platform under UNIX. A user interface was designed and partially implemented. The prototype was applied successfully to numerous Ada programs ranging in size from several hundred to several thousand lines of source code. In Phase 3 of the project, the prototype was prepared for limited distribution (GRASP/Ada Version 3.0) to facilitate evaluation. The user interface was extensively reworked. The current prototype provides the capability for the user to generate CSD from Ada source code in a reverse engineering mode with a level of flexibility suitable for practical application.

  11. Orchestration in work environment policy programs

    DEFF Research Database (Denmark)

    Hasle, Peter; Limborg, Hans Jørgen; Grøn, Sisse

    2017-01-01

    In spite of many years’ efforts, it is difficult to prove substantial improvements of the work environment and policymakers are continuously searching for new efficient strategies. This paper examines the concept of orchestration of work environment programs, based on an empirical analysis...... of recent Danish policy. Orchestration is a strategy where different stakeholders and activities are integrated into a unified program aimed at a specific target group. The analysis includes three policy cases, supplemented with two company case studies. The research shows a move toward a more governance...... type of regulation, which is not only emerging in network but also includes more explicitly orchestrated policy programs. The stakeholders participate in the network with different interests and the orchestration of work environment policies is therefore built on a platform of regulation...

  12. Economic analysis of implementing respirator program or ventilation system in a manufacturing environment

    International Nuclear Information System (INIS)

    Saidi-Mehrabab, M.

    2000-01-01

    The techniques and methods of developing cost models for respirators are discussed. Models are developed and implemented in this study for nineteen types of respirators in two major classes (air-purifying and supplied-air) and one L EV system. One respirator model is selected for detailed discussion from among the twenty models. The technical cost method is used in constructing the cost models for each of the respirators and the L EV system. In this methodology, the costs of purchasing and using a typical respirator or L EV system are divided into two categories, variable costs and fixed costs. Variable costs consists of the cost of replaceable components and probabilistic mortality cost. Fixed cost is the annualized capital requirement plus interest cost. The criteria for estimating some of the cost elements are based on existing equations in the literature, engineering judgement and manufacturer-provided information. A technical cost model results from the integration of this information into a computerized framework. The cost models for discussion are presented in the order of increasing computational complexity. Through the economic analysis, the lowest cost type in each class of respirator is determined. The determination criteria are based on the minimum total annual cost and highest benefit cost ratio. The selected lowest cost respirators are compared with the L EV system from the economic standpoint to reveal the cost optimal alternative

  13. The Causality Study of External Environment Analysis (EEA), Internal Environment Analysis (IEA), Strategy Implementation on Study Program Performance at Vocational High School (VHS) in Nias Archipelago, Indonesia

    Science.gov (United States)

    Waruwu, Binahati; Sitompul, Harun; Manullang, Belferik

    2016-01-01

    The purposes of this study are to find out the significant effect of: (1) EEA on strategy implementation, (2) IEA on strategy implementation, (3) EEA on study program performance, (4) IEA on study program performance, and (5) strategy implementation on study program performance of Vocational High School (VHS) in Nias Archipelago. The population of…

  14. INTERNAL ENVIRONMENT ANALYSIS TECHNIQUES

    Directory of Open Access Journals (Sweden)

    Caescu Stefan Claudiu

    2011-12-01

    Full Text Available Theme The situation analysis, as a separate component of the strategic planning, involves collecting and analysing relevant types of information on the components of the marketing environment and their evolution on the one hand and also on the organization’s resources and capabilities on the other. Objectives of the Research The main purpose of the study of the analysis techniques of the internal environment is to provide insight on those aspects that are of strategic importance to the organization. Literature Review The marketing environment consists of two distinct components, the internal environment that is made from specific variables within the organization and the external environment that is made from variables external to the organization. Although analysing the external environment is essential for corporate success, it is not enough unless it is backed by a detailed analysis of the internal environment of the organization. The internal environment includes all elements that are endogenous to the organization, which are influenced to a great extent and totally controlled by it. The study of the internal environment must answer all resource related questions, solve all resource management issues and represents the first step in drawing up the marketing strategy. Research Methodology The present paper accomplished a documentary study of the main techniques used for the analysis of the internal environment. Results The special literature emphasizes that the differences in performance from one organization to another is primarily dependant not on the differences between the fields of activity, but especially on the differences between the resources and capabilities and the ways these are capitalized on. The main methods of analysing the internal environment addressed in this paper are: the analysis of the organizational resources, the performance analysis, the value chain analysis and the functional analysis. Implications Basically such

  15. Communication Analysis of Environment.

    Science.gov (United States)

    Malik, M. F.; Thwaites, H. M.

    This textbook was developed for use in a Concordia University (Quebec) course entitled "Communication Analysis of Environment." Designed as a practical application of information theory and cybernetics in the field of communication studies, the course is intended to be a self-instructional process, whereby each student chooses one…

  16. Programming in an object-oriented environment

    CERN Document Server

    Ege, Raimund K

    1992-01-01

    Programming in an Object-Oriented Environment provides an in-depth look at the concepts behind the technology of object-oriented programming.This book explains why object-oriented programming has the potential to vastly improve the productivity of programmers and how to apply this technology in a practical environment. Many programming examples are included, focusing on how different programming languages support the core of object-oriented concepts. C++ is used as the main sample language throughout this text.This monograph consists of two major parts. Part I provides an introduction to objec

  17. Nuclear power program and environment

    International Nuclear Information System (INIS)

    Subramanya, S.K.; Gupta, J.P.

    2012-01-01

    Access to energy is one of the basic requirements for human development. To meet these growing energy needs without creating negative side effects is a challenge. The possibility of global climate change resulting from an increase in GHG concentrations in the atmosphere due to developmental activities is a major global concern. India is passing through the process of economic growth. Although India has not created the problem of climate change, India stands ready to be a part of the solution. The largest chunk of emissions was from electricity generation amounting to 65 percent of the total CO 2 equivalent emissions from the energy sector. Nuclear energy and renewables stand as sources for electricity with minimum GHG emission. Production of electricity from any form of primary energy has some environmental effect. A balanced assessment is needed. Nuclear power is of importance to India because it has potentially unlimited resource base, does not emit GHGs and, depending on location, has potentially favourable economics versus coal. In the long term, if we are to preserve the environment, it will be necessary to tap this source to the maximum extent feasible, In nuclear power stations, all its wastes are contained. India being home to nearly a third of the entire world's thorium, the strategies for large scale deployment of nuclear energy is focused towards utilization of thorium. The electricity potential of 3-stage programme is estimated to be about 2 lakh GWe-yr. Nuclear Power Corporation of India Limited is currently operating 20 reactors and has accumulated more than 337 reactor-years of experience in safe operation. A defence-in-depth approach is at the heart of safety philosophy, where there are several lines of defence, one backing another. Radiation is relevant for nuclear, coal, oil, gas and geothermal power plants. The essential task is to prevent excessive amounts now or in the future. One of the guiding principles adopted is to ensure that radiation

  18. An environment for parallel structuring of Fortran programs

    International Nuclear Information System (INIS)

    Sridharan, K.; McShea, M.; Denton, C.; Eventoff, B.; Browne, J.C.; Newton, P.; Ellis, M.; Grossbard, D.; Wise, T.; Clemmer, D.

    1990-01-01

    The paper describes and illustrates an environment for interactive support of the detection and implementation of macro-level parallelism in Fortran programs. The approach couples algorithms for dependence analysis with both innovative techniques for complexity management and capabilities for the measurement and analysis of the parallel computation structures generated through use of the environment. The resulting environment is complementary to the more common approach of seeking local parallelism by loop unrolling, either by an automatic compiler or manually. (orig.)

  19. PYGMALION: A Creative Programming Environment

    Science.gov (United States)

    1975-06-01

    iiiiiimimmmimm wm^m^mmm’ wi-i ,»■»’■’.■- v* 26 Examples of Purely Iconic Reasoning 1-H Pythagoras ’ original proof of the Pythagorean Theorem ... Theorem Proving Machine񓟋. His program employed properties of the representation to guide the proof of theorems . His simple heruristic "Reject...one theorem the square of the hypotenuse. "Every proposition is presented as a self-contained fact relying on its own intrinsic evidence. Instead

  20. Ecosystem Analysis Program

    International Nuclear Information System (INIS)

    Burgess, R.L.

    1978-01-01

    Progress is reported on the following research programs: analysis and modeling of ecosystems; EDFB/IBP data center; biome analysis studies; land/water interaction studies; and computer programs for development of models

  1. QUEST/Ada (query utility environment for software testing of Ada: The development of a program analysis environment for Ada, task 1, phase 3

    Science.gov (United States)

    Brown, David B.

    1991-01-01

    The results of research and development efforts of the first six months of Task 1, Phase 3 of the project are presented. The goals of Phase 3 are: (1) to further refine the rule base and complete the comparative rule base evaluation; (2) to implement and evaluate a concurrency testing prototype; (3) to convert the complete (unit-level and concurrency) testing prototype to a workstation environment; and (4) to provide a prototype development document to facilitate the transfer of research technology to a working environment. These goals were partially met and the results are summarized.

  2. The Scratch Programming Language and Environment

    Science.gov (United States)

    Maloney, John; Resnick, Mitchel; Rusk, Natalie; Silverman, Brian; Eastmond, Evelyn

    2010-01-01

    Scratch is a visual programming environment that allows users (primarily ages 8 to 16) to learn computer programming while working on personally meaningful projects such as animated stories and games. A key design goal of Scratch is to support self-directed learning through tinkering and collaboration with peers. This article explores how the…

  3. Diagnostics of communication and information environment of pedagogical program means

    Directory of Open Access Journals (Sweden)

    Елена Вадимовна Журавлёва

    2010-06-01

    Full Text Available The efficiency of pedagogical program means is considered through the correctness of a communication and information environment organization. The totality of pedagogical conditions is adduced; the communication and information environment answers these conditions. The main directions (didactic, psychological, ergonomic of analysis are determined and the methods choice for their diagnostics is grounded.

  4. Sandia Laboratories environment and safety programs

    International Nuclear Information System (INIS)

    Zak, B.D.; McGrath, P.E.; Trauth, C.A. Jr.

    1975-01-01

    Sandia, one of ERDA's largest laboratories, is primarily known for its extensive work in the nuclear weapons field. In recent years, however, Sandia's role has expanded to embrace sizeable programs in the energy, resource recovery, and the environment and safety fields. In this latter area, Sandia has programs which address nuclear, fossil fuel, and general environment and safety issues. Here we survey ongoing activities and describe in more detail aa few projects of particular interest. These range from a study of the impact of sealed disposal of radioactive wastes, through reactor safety and fossil fuel plume chemistry, to investigations of the composition and dynamics of the stratosphere

  5. Functional Analysis in Virtual Environments

    Science.gov (United States)

    Vasquez, Eleazar, III; Marino, Matthew T.; Donehower, Claire; Koch, Aaron

    2017-01-01

    Functional analysis (FA) is an assessment procedure involving the systematic manipulation of an individual's environment to determine why a target behavior is occurring. An analog FA provides practitioners the opportunity to manipulate variables in a controlled environment and formulate a hypothesis for the function of a behavior. In previous…

  6. Matlab programming for numerical analysis

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. Programming MATLAB for Numerical Analysis introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. You will first become

  7. LULU analysis program

    International Nuclear Information System (INIS)

    Crawford, H.J.; Lindstrom, P.J.

    1983-06-01

    Our analysis program LULU has proven very useful in all stages of experiment analysis, from prerun detector debugging through final data reduction. It has solved our problem of having arbitrary word length events and is easy enough to use that many separate experimenters are now analyzing with LULU. The ability to use the same software for all stages of experiment analysis greatly eases the programming burden. We may even get around to making the graphics elegant someday

  8. Indoor environment program: FY 1988 annual report

    International Nuclear Information System (INIS)

    1989-03-01

    The Indoor Environment Program examines the scientific issues associated with the design and operation of buildings to optimize energy performance and occupant comfort and health. Optimizing occupant health and comfort is addressed in various ways by groups within the Program. To examine energy flow through all elements of the building shell, the Energy Performance of Buildings Group measures air infiltration rates, studies thermal characteristics of structural elements, and develops simplified models of the behavior of complete buildings. Potential savings in the infiltration area are great

  9. Supportability Analysis in LCI Environment

    OpenAIRE

    Dragan Vasiljevic; Ana Horvat

    2013-01-01

    Starting from the basic pillars of the supportability analysis this paper queries its characteristics in LCI (Life Cycle Integration) environment. The research methodology contents a review of modern logistics engineering literature with the objective to collect and synthesize the knowledge relating to standards of supportability design in e-logistics environment. The results show that LCI framework has properties which are in fully compatibility with the requirement of s...

  10. The Environment and the Relative Protection Programs

    Directory of Open Access Journals (Sweden)

    Constantin Anghelache

    2007-12-01

    Full Text Available The material is presenting, under an adequate structure, an analysis of the environment of Romania. The starting point of the study is given by the natural conditions, influenced by the geographic location of Romania on the globe, evidencing the main characteristics (relief, hydrographic basin, climate, flora and fauna etc.. Afterwards, the material is pointing out the concerns as well as certain outcomes achieved in our country in the field of the environment protection. Particularly, there is the concern regarding the durable development which is emphasized, along with the part that the environment protection should play under the circumstances. Then, the material is evidencing the essence of the policies concerning the environment protection as well as the transitory steps implied in this field by the adhesion of Romania to the European Union.

  11. Biodiesel Emissions Analysis Program

    Science.gov (United States)

    Using existing data, the EPA's biodiesel emissions analysis program sought to quantify the air pollution emission effects of biodiesel for diesel engines that have not been specifically modified to operate on biodiesel.

  12. An In-Depth Analysis of Teaching Themes and the Quality of Teaching in Higher Education: Evidence from the Programming Education Environments

    Science.gov (United States)

    Xia, Belle Selene

    2017-01-01

    Education research in computer science has emphasized the research of web-based learning environments as a result of the latest technological advancement in higher education. Our research aim is to offer new insights on the different teaching strategies in programming education both from a theoretical and empirical point of view as a response to…

  13. Case Study of Analysis and Targets Setting in Workplace Health Promotion: Pilot Implementation of Health Environment and Safety Management in Enterprises (HESME) Program in the Republic of Macedonia

    OpenAIRE

    Risteska-Kuc, Snezana; Karadzinska-Bislimovska, Jovanka; Stoleski, Saso; Mijakoski, Dragan

    2008-01-01

    HESME program concept is based on building and strengthening existing national structures and practices for health promotion at workplace, occupational health and safety, and environmental health. As part of the global HESME program, which includes different activities in the Republic of Macedonia, HESME pilot projects in two enterprises in 2003/2004 were aimed at analysis and setting targets of workplace health promotion. The analysis was made by the Institute of Occupational Health, WHO Col...

  14. Robot Task Commander with Extensible Programming Environment

    Science.gov (United States)

    Hart, Stephen W (Inventor); Yamokoski, John D. (Inventor); Wightman, Brian J (Inventor); Dinh, Duy Paul (Inventor); Gooding, Dustin R (Inventor)

    2014-01-01

    A system for developing distributed robot application-level software includes a robot having an associated control module which controls motion of the robot in response to a commanded task, and a robot task commander (RTC) in networked communication with the control module over a network transport layer (NTL). The RTC includes a script engine(s) and a GUI, with a processor and a centralized library of library blocks constructed from an interpretive computer programming code and having input and output connections. The GUI provides access to a Visual Programming Language (VPL) environment and a text editor. In executing a method, the VPL is opened, a task for the robot is built from the code library blocks, and data is assigned to input and output connections identifying input and output data for each block. A task sequence(s) is sent to the control module(s) over the NTL to command execution of the task.

  15. Indoor Environment Program - 1996 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Indoor Environment Program

    1996-11-01

    The forty-five chemists, physicists, biologists, architects, engineers, staff, and students of the Indoor Environment Program are all working to solve the problems of indoor air quality, health, comfort, and energy use associated with the indoor environment. A common thread throughout this work is the importance of ventilation--both for its role in supporting human health and comfort as well as for its liability in requiring large amounts of energy to heat and cool it. The importance of understanding these interactions can be illustrated by two examples: the health and productivity of workers (Fisk and Rosenfeld, 1996) and the performance of sensitive equipment in clean room environments (Faulkner, et d., 1996). During the past year, we estimated the magnitudes of health and productivity gains that may be obtained by providing better indoor environments. The ratio of the potential financial benefits of improving indoor environments to the costs of the improvements ranges between 20 and 50. A second example is from our Clean Room Energy Efficiency Study: Clean rooms utilize large amounts of electricity to operate fans that recirculate air at very high flow rates through particle filters. Usually, the fans operate continuously at full speed, even when the clean room is unused. To reduce the energy use in a research clean room, the rate of air recirculation was controlled in response to real-time measurements of particle concentration. With this new control system, fan energy use decreased by 65% to 85% while maintaining particle concentrations below the allowable limits except during occasional one-minute periods. The estimated payback period for this technology is one to four years.

  16. Indoor environment program. 1994 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Daisey, J.M.

    1995-04-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  17. Indoor environment program - 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Daisey, J.M.

    1996-06-01

    Buildings use approximately one-third of the energy consumed in the United States. The potential energy savings derived from reduced infiltration and ventilation in buildings are substantial, since energy use associated with conditioning and distributing ventilation air is about 5.5 EJ per year. However, since ventilation is the dominant mechanism for removing pollutants from indoor sources, reduction of ventilation can have adverse effects on indoor air quality, and on the health, comfort, and productivity of building occupants. The Indoor Environment Program in LBL`s Energy and Environment Division was established in 1977 to conduct integrated research on ventilation, indoor air quality, and energy use and efficiency in buildings for the purpose of reducing energy liabilities associated with airflows into, within, and out of buildings while maintaining or improving occupant health and comfort. The Program is part of LBL`s Center for Building Science. Research is conducted on building energy use and efficiency, ventilation and infiltration, and thermal distribution systems; on the nature, sources, transport, transformation, and deposition of indoor air pollutants; and on exposure and health risks associated with indoor air pollutants. Pollutants of particular interest include radon; volatile, semivolatile, and particulate organic compounds; and combustion emissions, including environmental tobacco smoke, CO, and NO{sub x}.

  18. Portable parallel programming in a Fortran environment

    International Nuclear Information System (INIS)

    May, E.N.

    1989-01-01

    Experience using the Argonne-developed PARMACs macro package to implement a portable parallel programming environment is described. Fortran programs with intrinsic parallelism of coarse and medium granularity are easily converted to parallel programs which are portable among a number of commercially available parallel processors in the class of shared-memory bus-based and local-memory network based MIMD processors. The parallelism is implemented using standard UNIX (tm) tools and a small number of easily understood synchronization concepts (monitors and message-passing techniques) to construct and coordinate multiple cooperating processes on one or many processors. Benchmark results are presented for parallel computers such as the Alliant FX/8, the Encore MultiMax, the Sequent Balance, the Intel iPSC/2 Hypercube and a network of Sun 3 workstations. These parallel machines are typical MIMD types with from 8 to 30 processors, each rated at from 1 to 10 MIPS processing power. The demonstration code used for this work is a Monte Carlo simulation of the response to photons of a ''nearly realistic'' lead, iron and plastic electromagnetic and hadronic calorimeter, using the EGS4 code system. 6 refs., 2 figs., 2 tabs

  19. Real time programming environment for Windows

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, D.R. [LaBelle (Dennis R.), Clifton Park, NY (United States)

    1998-04-01

    This document provides a description of the Real Time Programming Environment (RTProE). RTProE tools allow a programmer to create soft real time projects under general, multi-purpose operating systems. The basic features necessary for real time applications are provided by RTProE, leaving the programmer free to concentrate efforts on his specific project. The current version supports Microsoft Windows{trademark} 95 and NT. The tasks of real time synchronization and communication with other programs are handled by RTProE. RTProE includes a generic method for connecting a graphical user interface (GUI) to allow real time control and interaction with the programmer`s product. Topics covered in this paper include real time performance issues, portability, details of shared memory management, code scheduling, application control, Operating System specific concerns and the use of Computer Aided Software Engineering (CASE) tools. The development of RTProE is an important step in the expansion of the real time programming community. The financial costs associated with using the system are minimal. All source code for RTProE has been made publicly available. Any person with access to a personal computer, Windows 95 or NT, and C or FORTRAN compilers can quickly enter the world of real time modeling and simulation.

  20. Analysis of environment, safety, and health (ES{ampersand}H) management systems for Department of Energy (DOE) Defense Programs (DP) facilities

    Energy Technology Data Exchange (ETDEWEB)

    Neglia, A. V., LLNL

    1998-03-01

    The purpose of this paper is to provide a summary analysis and comparison of various environment, safety, and health (ES&H) management systems required of, or suggested for use by, the Departrnent of Energy Defense Programs` sites. The summary analysis is provided by means of a comparison matrix, a set of Vean diagrams that highlights the focus of the systems, and an `End Gate` filter diagram that integrates the three Vean diagrams. It is intended that this paper will act as a starting point for implementing a particular system or in establishing a comprehensive site-wide integrated ES&H management system. Obviously, the source documents for each system would need to be reviewed to assure proper implementation of a particular system. The matrix compares nine ES&H management systems against a list of elements generated by identifying the unique elements of all the systems. To simplify the matrix, the elements are listed by means of a brief title. An explanation of the matrix elements is provided in Attachment 2 entitled, `Description of System Elements.` The elements are categorized under the Total Quality Management (TQM) `Plan, Do, Check, Act` framework with the added category of `Policy`. (The TQM concept is explained in the `DOE Quality Management implementation Guidelines,` July 1997 (DOE/QM- 0008)). The matrix provides a series of columns and rows to compare the unique elements found in each of the management systems. A `V` is marked if the element is explicitly identified as part of the particular ES&H management system. An `X` is marked if the element is not found in the particular ES&H management system, or if it is considered to be inadequately addressed. A `?` is marked if incorporation of the element is not clear. Attachment I provides additional background information which explains the justification for the marks in the matrix cells. Through the Vean diagrams and the `End Gate` filter in Section 3, the paper attempts to pictorially display the focus of

  1. The Learning Environment Counts: Longitudinal Qualitative Analysis of Study Strategies Adopted by First-Year Medical Students in a Competency-Based Educational Program.

    Science.gov (United States)

    Bierer, S Beth; Dannefer, Elaine F

    2016-11-01

    The move toward competency-based education will require medical schools and postgraduate training programs to restructure learning environments to motivate trainees to take personal ownership for learning. This qualitative study explores how medical students select and implement study strategies while enrolled in a unique, nontraditional program that emphasizes reflection on performance and competence rather than relying on high-stakes examinations or grades to motivate students to learn and excel. Fourteen first-year medical students volunteered to participate in three, 45-minute interviews (42 overall) scheduled three months apart during 2013-2014. Two medical educators used structured interview guides to solicit students' previous assessment experiences, preferred learning strategies, and performance monitoring processes. Interviews were digitally recorded and transcribed verbatim. Participants confirmed accuracy of transcripts. Researchers independently read transcripts and met regularly to discuss transcripts and judge when themes achieved saturation. Medical students can adopt an assessment for learning mind-set with faculty guidance and implement appropriate study strategies for mastery-learning demands. Though students developed new strategies at different rates during the year, they all eventually identified study and performance monitoring strategies to meet learning needs. Students who had diverse learning experiences in college embraced mastery-based study strategies sooner than peers after recognizing that the learning environment did not reward performance-based strategies. Medical students can take ownership for their learning and implement specific strategies to regulate behavior when learning environments contain building blocks emphasized in self-determination theory. Findings should generalize to educational programs seeking strategies to design learning environments that promote self-regulated learning.

  2. AXAF user interfaces for heterogeneous analysis environments

    Science.gov (United States)

    Mandel, Eric; Roll, John; Ackerman, Mark S.

    1992-01-01

    The AXAF Science Center (ASC) will develop software to support all facets of data center activities and user research for the AXAF X-ray Observatory, scheduled for launch in 1999. The goal is to provide astronomers with the ability to utilize heterogeneous data analysis packages, that is, to allow astronomers to pick the best packages for doing their scientific analysis. For example, ASC software will be based on IRAF, but non-IRAF programs will be incorporated into the data system where appropriate. Additionally, it is desired to allow AXAF users to mix ASC software with their own local software. The need to support heterogeneous analysis environments is not special to the AXAF project, and therefore finding mechanisms for coordinating heterogeneous programs is an important problem for astronomical software today. The approach to solving this problem has been to develop two interfaces that allow the scientific user to run heterogeneous programs together. The first is an IRAF-compatible parameter interface that provides non-IRAF programs with IRAF's parameter handling capabilities. Included in the interface is an application programming interface to manipulate parameters from within programs, and also a set of host programs to manipulate parameters at the command line or from within scripts. The parameter interface has been implemented to support parameter storage formats other than IRAF parameter files, allowing one, for example, to access parameters that are stored in data bases. An X Windows graphical user interface called 'agcl' has been developed, layered on top of the IRAF-compatible parameter interface, that provides a standard graphical mechanism for interacting with IRAF and non-IRAF programs. Users can edit parameters and run programs for both non-IRAF programs and IRAF tasks. The agcl interface allows one to communicate with any command line environment in a transparent manner and without any changes to the original environment. For example, the authors

  3. Laser programs facility management plan for environment, safety, and health

    International Nuclear Information System (INIS)

    Cruz, G.E.

    1996-01-01

    The Lawrence Livermore National Laboratory's (LLNL) Laser Programs ES ampersand H policy is established by the Associate Director for Laser Programs. This FMP is one component of that policy. Laser Programs personnel design, construct and operate research and development equipment located in various Livermore and Site 300 buildings. The Programs include a variety of activities, primarily laser research and development, inertial confinement fusion, isotope separation, and an increasing emphasis on materials processing, imaging systems, and signal analysis. This FMP is a formal statement of responsibilities and controls to assure operational activities are conducted without harm to employees, the general public, or the environment. This plan identifies the hazards associated with operating a large research and development facility and is a vehicle to control and mitigate those hazards. Hazards include, but are not limited to: laser beams, hazardous and radioactive materials, criticality, ionizing radiation or x rays, high-voltage electrical equipment, chemicals, and powered machinery

  4. Probabilistic Structural Analysis Program

    Science.gov (United States)

    Pai, Shantaram S.; Chamis, Christos C.; Murthy, Pappu L. N.; Stefko, George L.; Riha, David S.; Thacker, Ben H.; Nagpal, Vinod K.; Mital, Subodh K.

    2010-01-01

    NASA/NESSUS 6.2c is a general-purpose, probabilistic analysis program that computes probability of failure and probabilistic sensitivity measures of engineered systems. Because NASA/NESSUS uses highly computationally efficient and accurate analysis techniques, probabilistic solutions can be obtained even for extremely large and complex models. Once the probabilistic response is quantified, the results can be used to support risk-informed decisions regarding reliability for safety-critical and one-of-a-kind systems, as well as for maintaining a level of quality while reducing manufacturing costs for larger-quantity products. NASA/NESSUS has been successfully applied to a diverse range of problems in aerospace, gas turbine engines, biomechanics, pipelines, defense, weaponry, and infrastructure. This program combines state-of-the-art probabilistic algorithms with general-purpose structural analysis and lifting methods to compute the probabilistic response and reliability of engineered structures. Uncertainties in load, material properties, geometry, boundary conditions, and initial conditions can be simulated. The structural analysis methods include non-linear finite-element methods, heat-transfer analysis, polymer/ceramic matrix composite analysis, monolithic (conventional metallic) materials life-prediction methodologies, boundary element methods, and user-written subroutines. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. NASA/NESSUS 6.2c is structured in a modular format with 15 elements.

  5. A survey of object oriented languages in programming environments

    OpenAIRE

    Haakonsen, Harald

    1987-01-01

    Approved for public release; distribution is unlimited This thesis addresses object oriented programming languages; and a restrictive definition of object oriented programming languages is presented and defended. Differences between programming languages are discussed and related to interactive integrated programming environments. Topics related to user friendly interface to the computer system and modem programming practice are discussed. The thesis especially addresses features in ...

  6. Collectively loading programs in a multiple program multiple data environment

    Science.gov (United States)

    Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

    2016-11-08

    Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

  7. Lazy functional programs in a concurrent environment

    NARCIS (Netherlands)

    Feijs, L.M.G.; Reniers, M.A.

    1997-01-01

    The mechanism of Landin-style stream input/output (I/O) makes it possible to write functional programs, which behave as reactive systems when executed with lazy evaluation. Functional programming languages like Gofer are attractive for programming the data transformations of a reactive system. But

  8. Optimization of dairy cattle breeding programs for different environment with genotype by environment interaction

    NARCIS (Netherlands)

    Mulder, H.A.; Veerkamp, R.F.; Ducro, B.J.; Arendonk, van J.A.M.; Bijma, P.

    2006-01-01

    Dairy cattle breeding organizations tend to sell semen to breeders operating in different environments and genotype × environment interaction may play a role. The objective of this study was to investigate optimization of dairy cattle breeding programs for 2 environments with genotype × environment

  9. Environmental conditions analysis program

    International Nuclear Information System (INIS)

    Holten, J.

    1991-01-01

    The PC-based program discussed in this paper has the capability of determining the steady state temperatures of environmental zones (rooms). A program overview will be provided along with examples of formula use. Required input and output from the program will also be discussed. Specific application of plant monitored temperatures and utilization of this program will be offered. The presentation will show how the program can project individual room temperature profiles without continual temperature monitoring of equipment. A discussion will also be provided for the application of the program generated data. Evaluations of anticipated or planned plant modifications and the use of the subject program will also be covered

  10. A Programming Environment for Parallel Vision Algorithms

    Science.gov (United States)

    1990-04-11

    industrial arm on the market , while the unique head was designed by Rochester’s Computer Science and Mechanical Engineering Departments. 9a 4.1 Introduction...R. Constraining-Unification and the Programming Language Unicorn . In Logic Programming, Functions, Relations, and Equations, Degroot and Lind- strom

  11. Leadership Program for Promoting Policies Linking the Environment ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Leadership Program for Promoting Policies Linking the Environment and Health in Africa. It is obvious that in many African countries, no linkages are being made between health policy and environment policy. In 2005, the global network Environment and Development Action in the Third World (ENDA-TM) francophone ...

  12. Nonlinear programming analysis and methods

    CERN Document Server

    Avriel, Mordecai

    2012-01-01

    This text provides an excellent bridge between principal theories and concepts and their practical implementation. Topics include convex programming, duality, generalized convexity, analysis of selected nonlinear programs, techniques for numerical solutions, and unconstrained optimization methods.

  13. The Living With a Star Space Environment Testbed Program

    Science.gov (United States)

    Barth, Janet; LaBel, Kenneth; Day, John H. (Technical Monitor)

    2001-01-01

    NASA has initiated the Living with a Star (LWS) Program to develop the scientific understanding to address the aspects of the Connected Sun-Earth system that affects life and society. The Program Architecture includes science missions, theory and modeling and Space Environment Testbeds (SET). This current paper discusses the Space Environment Testbeds. The goal of the SET program is to improve the engineering approach to accomodate and/or mitigate the effects of solar variability on spacecraft design and operations. The SET Program will infuse new technologies into the space programs through collection of data in space and subsequent design and validation of technologies. Examples of these technologies are cited and discussed.

  14. ROSIE: A Programming Environment for Expert Systems

    Science.gov (United States)

    1985-10-01

    ence on Artificial Inteligence , Tbilisi, USSR, 1975. Fain, J., D. Gorlin, F. Hayes-Roth, S. Rosenschein, H. Sowizral, and D. Waterman, The ROSIE Language...gramming environment for artificial intelligence (AI) applications. It provides particular support for designing expert systems, systems that embody

  15. Using Programming Environments in Teaching GIS Concepts

    Directory of Open Access Journals (Sweden)

    Imre Bornemisza

    2009-03-01

    Full Text Available When teaching Geographical Information Systems (GIS it is important to explain the theoretical elements, but it is also necessary to illustrate the basic functions with examples. To help students it is advisable to separate the teaching of fundamentals from the practical application of complex GIS software. A simple programming language like Logo creates opportunities for acquiring knowledge in an easy way. The development of a program makes it possible tounderstand the most important categories. If the program contains query functions as well, students can learn more about problem solution methods.This paper also demonstrates the power of the Logo family of languages which is delivered by different implementations. Elica Logo is used to build simple GIS tools that provide a very widerange of educational problems and lead to numerous ideas for further explorations. The nice intuitive 3D interface is an attractive approach to gain and retain student’s engagement in thelearning process.

  16. Damage analysis and fundamental studies program

    International Nuclear Information System (INIS)

    Doran, D.G.; Farrar, H. IV; Goland, A.N.

    1978-01-01

    The Damage Analysis and Fundamental Studies (DAFS) Task Group has been formed by the Office of Fusion Energy to develop procedures for applying data obtained in various irradiation test facilities to projected fusion environments. A long-range program plan has been prepared and implementation has begun. The plan and technical status are briefly described

  17. Development of Virtual Environment under Member State Support Program

    International Nuclear Information System (INIS)

    Koh, Byungmarn; Lee, Nayoung

    2013-01-01

    Member State Support Program (MSSP) is comprised of various programs such as development of safeguards approach, training, information analysis and so on. Each support programs would be evaluated biennially through coordinators' meeting. IAEA publish 'Development and Implementation Support Programme for Nuclear Verification' so that the member state can review it. In the program, IAEA specify the need to develop the virtual reality based training tools. The objective of this project is to develop comprehensive training software dedicated to verification activities in the field based on the virtual environment. The training for the IAEA inspector is indispensable to maintain or improve their verification capability and to be prepared for the inspection of the complicated facilities. However, the grabbing of the available facility is not easy due to following limitations such as security, confidentiality, interference of the commercial operation and so on. Therefore, the virtual environment, which can replace a real facility, is required for the IAEA training. The objective of this software is to support the IAEA's verification capability. It is useful for the trainer and trainee to better understand how nuclear materials are processed in the fuel fabrication facility and what kind safeguards approaches are needed at each process before inspections. The final product will be integrated in the IAEA safeguards training courses to improve the efficiency of the safeguards training. Also we are going to make a decision if additional projects such as CANDU fuel parts or other facilities depending on evaluation results at the IAEA training course will be held on Korea in this year

  18. Development of Virtual Environment under Member State Support Program

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Byungmarn; Lee, Nayoung [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

    2013-05-15

    Member State Support Program (MSSP) is comprised of various programs such as development of safeguards approach, training, information analysis and so on. Each support programs would be evaluated biennially through coordinators' meeting. IAEA publish 'Development and Implementation Support Programme for Nuclear Verification' so that the member state can review it. In the program, IAEA specify the need to develop the virtual reality based training tools. The objective of this project is to develop comprehensive training software dedicated to verification activities in the field based on the virtual environment. The training for the IAEA inspector is indispensable to maintain or improve their verification capability and to be prepared for the inspection of the complicated facilities. However, the grabbing of the available facility is not easy due to following limitations such as security, confidentiality, interference of the commercial operation and so on. Therefore, the virtual environment, which can replace a real facility, is required for the IAEA training. The objective of this software is to support the IAEA's verification capability. It is useful for the trainer and trainee to better understand how nuclear materials are processed in the fuel fabrication facility and what kind safeguards approaches are needed at each process before inspections. The final product will be integrated in the IAEA safeguards training courses to improve the efficiency of the safeguards training. Also we are going to make a decision if additional projects such as CANDU fuel parts or other facilities depending on evaluation results at the IAEA training course will be held on Korea in this year.

  19. ASTRID:. A Programming Environment for Physicists

    Science.gov (United States)

    Bonomi, E.; Flück, M.; Gruber, R.; Herbin, R.; Richner, T.; Schmid, V.; Tran, C. T.; Merazzi, S.

    The purpose of the ASTRID project [1] is to combine the effort of the scientific community in the development of a software system for simulation and modeling of physical phenomena that meets the requirements of the users. This system includes the data management system MEMCOM [2], the ASTRID command language [3], the three-dimensional graphics system VIEW [4], the ASTRID finite element solver [5] and a few utility programs to interface user defined modules to the ASTRID data structure.

  20. Planetary Protection Bioburden Analysis Program

    Science.gov (United States)

    Beaudet, Robert A.

    2013-01-01

    This program is a Microsoft Access program that performed statistical analysis of the colony counts from assays performed on the Mars Science Laboratory (MSL) spacecraft to determine the bioburden density, 3-sigma biodensity, and the total bioburdens required for the MSL prelaunch reports. It also contains numerous tools that report the data in various ways to simplify the reports required. The program performs all the calculations directly in the MS Access program. Prior to this development, the data was exported to large Excel files that had to be cut and pasted to provide the desired results. The program contains a main menu and a number of submenus. Analyses can be performed by using either all the assays, or only the accountable assays that will be used in the final analysis. There are three options on the first menu: either calculate using (1) the old MER (Mars Exploration Rover) statistics, (2) the MSL statistics for all the assays, or This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software

  1. FAME, the Flux Analysis and Modeling Environment

    Directory of Open Access Journals (Sweden)

    Boele Joost

    2012-01-01

    Full Text Available Abstract Background The creation and modification of genome-scale metabolic models is a task that requires specialized software tools. While these are available, subsequently running or visualizing a model often relies on disjoint code, which adds additional actions to the analysis routine and, in our experience, renders these applications suboptimal for routine use by (systems biologists. Results The Flux Analysis and Modeling Environment (FAME is the first web-based modeling tool that combines the tasks of creating, editing, running, and analyzing/visualizing stoichiometric models into a single program. Analysis results can be automatically superimposed on familiar KEGG-like maps. FAME is written in PHP and uses the Python-based PySCeS-CBM for its linear solving capabilities. It comes with a comprehensive manual and a quick-start tutorial, and can be accessed online at http://f-a-m-e.org/. Conclusions With FAME, we present the community with an open source, user-friendly, web-based "one stop shop" for stoichiometric modeling. We expect the application will be of substantial use to investigators and educators alike.

  2. Contour tracking and corner detection in a logic programming environment

    DEFF Research Database (Denmark)

    Bell, Benjamin; Pau, L. F.

    1990-01-01

    The added functionality such as contour tracking and corner detection which logic programming lends to standard image operators is described. An environment for implementing low-level imaging operations with Prolog predicates is considered. Within this environment, higher-level image predicates (...

  3. Factors Influencing Learning Environments in an Integrated Experiential Program

    Science.gov (United States)

    Koci, Peter

    The research conducted for this dissertation examined the learning environment of a specific high school program that delivered the explicit curriculum through an integrated experiential manner, which utilized field and outdoor experiences. The program ran over one semester (five months) and it integrated the grade 10 British Columbian curriculum in five subjects. A mixed methods approach was employed to identify the students' perceptions and provide richer descriptions of their experiences related to their unique learning environment. Quantitative instruments were used to assess changes in students' perspectives of their learning environment, as well as other supporting factors including students' mindfulness, and behaviours towards the environment. Qualitative data collection included observations, open-ended questions, and impromptu interviews with the teacher. The qualitative data describe the factors and processes that influenced the learning environment and give a richer, deeper interpretation which complements the quantitative findings. The research results showed positive scores on all the quantitative measures conducted, and the qualitative data provided further insight into descriptions of learning environment constructs that the students perceived as most important. A major finding was that the group cohesion measure was perceived by students as the most important attribute of their preferred learning environment. A flow chart was developed to help the researcher conceptualize how the learning environment, learning process, and outcomes relate to one another in the studied program. This research attempts to explain through the consideration of this case study: how learning environments can influence behavioural change and how an interconnectedness among several factors in the learning process is influenced by the type of learning environment facilitated. Considerably more research is needed in this area to understand fully the complexity learning

  4. A Discussion of Patient Safety Programs in the United States Air Force Ground Medical Expeditionary Environment and an Analysis of Potential Solutions for Increasing Their Effectiveness

    Science.gov (United States)

    2017-05-01

    deployed environment . Finally, recommendations are introduced to help realize the ultimate trusted care goal of “zero (patient) harm,” wherever care may...Defense Medical Treatment Facilities (MTFs).10 Specifically, Department of Defense health care organizations were now required to establish “a...expeditionary environment , to the maximum extent possible. Trusted Care begins with me, you, and us all – everywhere and anywhere care may be provided

  5. Conducting Simulation Studies in the R Programming Environment.

    Science.gov (United States)

    Hallgren, Kevin A

    2013-10-12

    Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtaining accurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted to researchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulation studies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a) the use of simulations to answer a novel question about statistical analysis, (b) the use of simulations to estimate statistical power, and (c) the use of simulations to obtain confidence intervals of parameter estimates through bootstrapping. Results and fully annotated syntax from these examples are provided.

  6. Conducting Simulation Studies in the R Programming Environment

    Directory of Open Access Journals (Sweden)

    Kevin A. Hallgren

    2013-10-01

    Full Text Available Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtainingaccurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted toresearchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulationstudies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a the use of simulations to answer a novel question about statistical analysis, (b the use of simulations to estimate statistical power, and (c the use of simulations to obtain confidence intervals of parameter estimates throughbootstrapping. Results and fully annotated syntax from these examples are provided.

  7. Static Analysis of Mobile Programs

    Science.gov (United States)

    2017-02-01

    and not allowed, to do. The second issue was that a fully static analysis was never a realistic possibility, because Java , the programming langauge...scale to large programs it had to handle essentially all of the features of Java and could also be used as a general-purpose analysis engine. The...static analysis of imperative languages. • A framework for adding specifications about the behavior of methods, including methods that were

  8. The role of physicality in rich programming environments

    Science.gov (United States)

    Liu, Allison S.; Schunn, Christian D.; Flot, Jesse; Shoop, Robin

    2013-12-01

    Computer science proficiency continues to grow in importance, while the number of students entering computer science-related fields declines. Many rich programming environments have been created to motivate student interest and expertise in computer science. In the current study, we investigated whether a recently created environment, Robot Virtual Worlds (RVWs), can be used to teach computer science principles within a robotics context by examining its use in high-school classrooms. We also investigated whether the lack of physicality in these environments impacts student learning by comparing classrooms that used either virtual or physical robots for the RVW curriculum. Results suggest that the RVW environment leads to significant gains in computer science knowledge, that virtual robots lead to faster learning, and that physical robots may have some influence on algorithmic thinking. We discuss the implications of physicality in these programming environments for learning computer science.

  9. Development of a visual programming environment for the solution of elliptic questions

    International Nuclear Information System (INIS)

    Rehman, M.U.

    1999-01-01

    Recent trend in programming is changing from text based programming to visual programming. In the text-based environment, major amount of time is spent on program development and debugging. Visual programming environment makes the process of modeling and simulation more intuitive and creative. In this case the user spends more time on actual model building and later on the analysis phase of the design. The aim of this project is to design and develop a visual programming environment for the solution of the elliptical partial differential equations. The main core of this software package is based on advanced data structures including graph theory representations and generic trees for fast data linking and processing. Various case studies have been performed. The results are compared with the exact results. (author)

  10. Ada Run Time Support Environments and a common APSE Interface Set. [Ada Programming Support Environment

    Science.gov (United States)

    Mckay, C. W.; Bown, R. L.

    1985-01-01

    The paper discusses the importance of linking Ada Run Time Support Environments to the Common Ada Programming Support Environment (APSE) Interface Set (CAIS). A non-stop network operating systems scenario is presented to serve as a forum for identifying the important issues. The network operating system exemplifies the issues involved in the NASA Space Station data management system.

  11. WCET Analysis of Java Bytecode Featuring Common Execution Environments

    DEFF Research Database (Denmark)

    Luckow, Kasper Søe; Thomsen, Bent; Frost, Christian

    2011-01-01

    We present a novel tool for statically determining the Worst Case Execution Time (WCET) of Java Bytecode-based programs called Tool for Execution Time Analysis of Java bytecode (TetaJ). This tool differentiates itself from existing tools by separating the individual constituents of the execution...... environment into independent components. The prime benefit is that it can be used for execution environments featuring common embedded processors and software implementations of the JVM. TetaJ employs a model checking approach for statically determining WCET where the Java program, the JVM, and the hardware...

  12. Programs for nuclear data analysis

    International Nuclear Information System (INIS)

    Bell, R.A.I.

    1975-01-01

    The following report details a number of programs and subroutines which are useful for analysis of data from nuclear physics experiments. Most of them are available from pool pack 005 on the IBM1800 computer. All of these programs are stored there as core loads, and the subroutines and functions in relocatable format. The nature and location of other programs are specified as appropriate. (author)

  13. GAP Analysis Program (GAP)

    Data.gov (United States)

    Kansas Data Access and Support Center — The Kansas GAP Analysis Land Cover database depicts 43 land cover classes for the state of Kansas. The database was generated using a two-stage hybrid classification...

  14. Liquid Effluents Program mission analysis

    International Nuclear Information System (INIS)

    Lowe, S.S.

    1994-01-01

    Systems engineering is being used to identify work to cleanup the Hanford Site. The systems engineering process transforms an identified mission need into a set of performance parameters and a preferred system configuration. Mission analysis is the first step in the process. Mission analysis supports early decision-making by clearly defining the program objectives, and evaluating the feasibility and risks associated with achieving those objectives. The results of the mission analysis provide a consistent basis for subsequent systems engineering work. A mission analysis was performed earlier for the overall Hanford Site. This work was continued by a ''capstone'' team which developed a top-level functional analysis. Continuing in a top-down manner, systems engineering is now being applied at the program and project levels. A mission analysis was conducted for the Liquid Effluents Program. The results are described herein. This report identifies the initial conditions and acceptable final conditions, defines the programmatic and physical interfaces and sources of constraints, estimates the resources to carry out the mission, and establishes measures of success. The mission analysis reflects current program planning for the Liquid Effluents Program as described in Liquid Effluents FY 1995 Multi-Year Program Plan

  15. Static Analysis of Functional Programs

    NARCIS (Netherlands)

    van den Berg, Klaas; van den Broek, P.M.

    1994-01-01

    In this paper, the static analysis of programs in the functional programming language Miranda is described based on two graph models. A new control-flow graph model of Miranda definitions is presented, and a model with four classes of caligraphs. Standard software metrics are applicable to these

  16. Report of the 2014 Programming Models and Environments Summit

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael [US Dept. of Energy, Washington, DC (United States); Lethin, Richard [US Dept. of Energy, Washington, DC (United States)

    2016-09-19

    Programming models and environments play the essential roles in high performance computing of enabling the conception, design, implementation and execution of science and engineering application codes. Programmer productivity is strongly influenced by the effectiveness of our programming models and environments, as is software sustainability since our codes have lifespans measured in decades, so the advent of new computing architectures, increased concurrency, concerns for resilience, and the increasing demands for high-fidelity, multi-physics, multi-scale and data-intensive computations mean that we have new challenges to address as part of our fundamental R&D requirements. Fortunately, we also have new tools and environments that make design, prototyping and delivery of new programming models easier than ever. The combination of new and challenging requirements and new, powerful toolsets enables significant synergies for the next generation of programming models and environments R&D. This report presents the topics discussed and results from the 2014 DOE Office of Science Advanced Scientific Computing Research (ASCR) Programming Models & Environments Summit, and subsequent discussions among the summit participants and contributors to topics in this report.

  17. CONSIDERATIONS ON OBJECT-ORIENTED PROGRAMMING ENVIRONMENT AUTOCAD DRAWINGS

    Directory of Open Access Journals (Sweden)

    PINTILIE Alexandru

    2015-06-01

    Full Text Available In recent years, Low Cost CAD systems are widespread in the technical world. Currently, the highest-rated CAD system is AutoCAD due to the fact that in association with AutoLISP programming language covered a broad range of production needs. As a high-level programming language, AutoLISP provides an easy and efficient programming technique that leads to automation and parameterization of AutoCAD commands and reduces the time spending for designing the drawings. This paper aims to highlight the advantages of using AutoLISP programming environment in the 2D drafting and 3D modeling using AutoCAD tools.

  18. Analysis of computer programming languages

    International Nuclear Information System (INIS)

    Risset, Claude Alain

    1967-01-01

    This research thesis aims at trying to identify some methods of syntax analysis which can be used for computer programming languages while putting aside computer devices which influence the choice of the programming language and methods of analysis and compilation. In a first part, the author proposes attempts of formalization of Chomsky grammar languages. In a second part, he studies analytical grammars, and then studies a compiler or analytic grammar for the Fortran language

  19. Graphical programming interface: A development environment for MRI methods.

    Science.gov (United States)

    Zwart, Nicholas R; Pipe, James G

    2015-11-01

    To introduce a multiplatform, Python language-based, development environment called graphical programming interface for prototyping MRI techniques. The interface allows developers to interact with their scientific algorithm prototypes visually in an event-driven environment making tasks such as parameterization, algorithm testing, data manipulation, and visualization an integrated part of the work-flow. Algorithm developers extend the built-in functionality through simple code interfaces designed to facilitate rapid implementation. This article shows several examples of algorithms developed in graphical programming interface including the non-Cartesian MR reconstruction algorithms for PROPELLER and spiral as well as spin simulation and trajectory visualization of a FLORET example. The graphical programming interface framework is shown to be a versatile prototyping environment for developing numeric algorithms used in the latest MR techniques. © 2014 Wiley Periodicals, Inc.

  20. XML Graphs in Program Analysis

    DEFF Research Database (Denmark)

    Møller, Anders; Schwartzbach, Michael I.

    2011-01-01

    of XML graphs against different XML schema languages, and provide a software package that enables others to make use of these ideas. We also survey the use of XML graphs for program analysis with four very different languages: XACT (XML in Java), Java Servlets (Web application programming), XSugar......XML graphs have shown to be a simple and effective formalism for representing sets of XML documents in program analysis. It has evolved through a six year period with variants tailored for a range of applications. We present a unified definition, outline the key properties including validation...

  1. Seismic analysis program group: SSAP

    International Nuclear Information System (INIS)

    Uchida, Masaaki

    2002-05-01

    A group of programs SSAP has been developed, each member of which performs seismic calculation using simple single-mass system model or multi-mass system model. For response of structures to a transverse s-wave, a single-mass model program calculating response spectrum and a multi-mass model program are available. They perform calculation using the output of another program, which produces simulated earthquakes having the so-called Ohsaki-spectrum characteristic. Another program has been added, which calculates the response of one-dimensional multi-mass systems to vertical p-wave input. It places particular emphasis on the analysis of the phenomena observed at some shallow earthquakes in which stones jump off the ground. Through a series of test calculations using these programs, some interesting information has been derived concerning the validity of superimposing single-mass model calculation, and also the condition for stones to jump. (author)

  2. PIXE analysis of work environment aerosols

    International Nuclear Information System (INIS)

    Akabayashi, Hideo; Fujimoto, Fuminori; Komaki, Kenichiro; Ootuka, Akio; Kobayashi, Koichi; Yamashita, Hiroshi

    1988-01-01

    In labor environment, the quantity of chemical substances in the air is more, and their kinds are more diversified than in general home environment. It has been well known that some substances contained in the aerosol in labor environment (floating dust in the atmosphere) such as asbestos and hexavalent chromium have the possibility of causing serious injuries such as cancer of respiratory organ. In order to identify the harmful substances to which laborers are exposed and to take the measures for removing them, it is necessary to investigate in detail into many factors related to the effect of aerosol on human bodies, such as the composition of elements, chemical condition, concentration, the particle size of dust and temporal and spatial distributions. For the purpose, sampling and analysis must be carried out so that information can be extracted as much as possible from a minute amount of sample. The particle induced x-ray emission (PIXE) analysis is very effective for this application. In this paper, the development of a PIXE analysis system and the knowledge obtained by the sampling and measurement of aerosol in indoor labor environment are reported. The labor environment selected is that of the workshop of Department of Liberal Arts, University of Tokyo. Sampling, the experimental apparatus, the method of data analysis and the results of analysis are described. (Kako, I.)

  3. Program Analysis Scenarios in Rascal

    NARCIS (Netherlands)

    M.A. Hills (Mark); P. Klint (Paul); J.J. Vinju (Jurgen); F. Durán

    2012-01-01

    textabstractRascal is a meta programming language focused on the implementation of domain-specific languages and on the rapid construction of tools for software analysis and software transformation. In this paper we focus on the use of Rascal for software analysis. We illustrate a range of scenarios

  4. Justifying Innovative Language Programs in an Environment of ...

    African Journals Online (AJOL)

    pkurgat

    Justifying Innovative Language Programs in an Environment of Change: The Case ... Key words: project management, change management, educational management, .... the sustainability of the course considering that there were and continue to be problems .... language teaching in general on a sound scientific base.

  5. Porting linac application programs to a windowing environment

    International Nuclear Information System (INIS)

    Nonglaton, J.M.; Raich, U.

    1992-01-01

    We report our experience in porting Linac application programs written for Camac controlled hardware consoles to an X-Windows/Motif based workstation environment. Application programs acquire their parameter values from a front end computer (FEC), controlling the acceleration process, via a local area network. The timing for data acquisition and control is determined by the particle source timing. Two server programs on the FEC for repetitive acquisition and command-response mode will be described. The application programs on the workstations access a common parameter access server who establishes the necessary connection to the parameters on the FEC. It displays the parameter's current values and allows control through Motif widgets. An interactive synoptics editor and its corresponding driver program allow easy generation of synoptics displays and interaction through command panels. (author)

  6. R data analysis without programming

    CERN Document Server

    Gerbing, David W

    2013-01-01

    This book prepares readers to analyze data and interpret statistical results using R more quickly than other texts. R is a challenging program to learn because code must be created to get started. To alleviate that challenge, Professor Gerbing developed lessR. LessR extensions remove the need to program. By introducing R through less R, readers learn how to organize data for analysis, read the data into R, and produce output without performing numerous functions and programming exercises first. With lessR, readers can select the necessary procedure and change the relevant variables without pro

  7. Survey on present status and trend of parallel programming environments

    International Nuclear Information System (INIS)

    Takemiya, Hiroshi; Higuchi, Kenji; Honma, Ichiro; Ohta, Hirofumi; Kawasaki, Takuji; Imamura, Toshiyuki; Koide, Hiroshi; Akimoto, Masayuki.

    1997-03-01

    This report intends to provide useful information on software tools for parallel programming through the survey on parallel programming environments of the following six parallel computers, Fujitsu VPP300/500, NEC SX-4, Hitachi SR2201, Cray T94, IBM SP, and Intel Paragon, all of which are installed at Japan Atomic Energy Research Institute (JAERI), moreover, the present status of R and D's on parallel softwares of parallel languages, compilers, debuggers, performance evaluation tools, and integrated tools is reported. This survey has been made as a part of our project of developing a basic software for parallel programming environment, which is designed on the concept of STA (Seamless Thinking Aid to programmers). (author)

  8. Energy and environment annual report 1974. [Environmental Research programs

    Energy Technology Data Exchange (ETDEWEB)

    Blumstein, C. (ed.)

    1974-01-01

    Research in the Division's environmental science program includes air pollution, water pollution, and the effects of pollutants on man and natural ecosystems. Work has focused on the chemistry and physics of particle surfaces. Using the technique of electron spectroscopy for chemical analysis (ESCA), surface reactions of sulfur and nitrogen compounds have been studied, and results include the identification of new chemical forms of nitrogen on particle surfaces and evidence for the importance of particle surfaces in the catalysis of sulfur dioxide to sulfuric acid. The Division's work in water pollution has been devoted to the study of trace metals in the estuarine environment, especially in San Francisco Bay. Studies on the effect of dredging operations on trace metals in the Mare Island ship channel and on the distribution of cadmium in Bay sediments have been performed. Research has also been conducted on the distribution of trace elements between bound states on suspended particles and in solution in Bay waters. Research is being conducted on a variety of problems relating to effects of pollutants. Biological studies seeking to discover effects of specific environmental insults such as oxidants at the cellular level have been done, and epidemiological studies have been initiated on the impacts of trace metals on human health. Theoretical studies in an attempt to develop a basis for assessing the stability of ecological systems are also being undertaken.

  9. Ambient environment analysis by means of perception

    NARCIS (Netherlands)

    Bitterman, M.S.; Ciftcioglu, O.; Bhatt, M.; Schultz, C.

    2013-01-01

    Analysis of an ambient environment by means of perception is described. The surveillance of an object by human, who watches a scene via a monitor that shows camera sensed information, is investigated. Although the camera sensing process is a deterministic process, human perception of a scene via

  10. Analysis of methods. [information systems evolution environment

    Science.gov (United States)

    Mayer, Richard J. (Editor); Ackley, Keith A.; Wells, M. Sue; Mayer, Paula S. D.; Blinn, Thomas M.; Decker, Louis P.; Toland, Joel A.; Crump, J. Wesley; Menzel, Christopher P.; Bodenmiller, Charles A.

    1991-01-01

    Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity

  11. CRITERIA OF LANGUAGE AND PROGRAMMING ENVIRONMENT SELECTION FOR USE IN THE CAPACITY OF EDUCATIONAL AIDS

    Directory of Open Access Journals (Sweden)

    Petro H. Shevchuk

    2010-09-01

    Full Text Available The role of educational aids is to a large degree treated to be determinative in provision with its efficiency. The languages and programming environments are stated in the article as those that belong to educational aids. The criteria and backgrounds of their selection for educational purpose at the lessons of programming at comprehensive school are treated in the article. The examples of principle characteristics comparison of Pascal and C# are also cited. The article points at the necessity of further analysis of programming languages sampling for use as educational aids in teaching programming.

  12. Mall Walking Program Environments, Features, and Participants: A Scoping Review.

    Science.gov (United States)

    Farren, Laura; Belza, Basia; Allen, Peg; Brolliar, Sarah; Brown, David R; Cormier, Marc L; Janicek, Sarah; Jones, Dina L; King, Diane K; Marquez, David X; Rosenberg, Dori E

    2015-08-13

    Walking is a preferred and recommended physical activity for middle-aged and older adults, but many barriers exist, including concerns about safety (ie, personal security), falling, and inclement weather. Mall walking programs may overcome these barriers. The purpose of this study was to summarize the evidence on the health-related value of mall walking and mall walking programs. We conducted a scoping review of the literature to determine the features, environments, and benefits of mall walking programs using the RE-AIM framework (reach, effectiveness, adoption, implementation, and maintenance). The inclusion criteria were articles that involved adults aged 45 years or older who walked in indoor or outdoor shopping malls. Exclusion criteria were articles that used malls as laboratory settings or focused on the mechanics of walking. We included published research studies, dissertations, theses, conference abstracts, syntheses, nonresearch articles, theoretical papers, editorials, reports, policy briefs, standards and guidelines, and nonresearch conference abstracts and proposals. Websites and articles written in a language other than English were excluded. We located 254 articles on mall walking; 32 articles met our inclusion criteria. We found that malls provided safe, accessible, and affordable exercise environments for middle-aged and older adults. Programmatic features such as program leaders, blood pressure checks, and warm-up exercises facilitated participation. Individual benefits of mall walking programs included improvements in physical, social, and emotional well-being. Limited transportation to the mall was a barrier to participation. We found the potential for mall walking programs to be implemented in various communities as a health promotion measure. However, the research on mall walking programs is limited and has weak study designs. More rigorous research is needed to define best practices for mall walking programs' reach, effectiveness, adoption

  13. The Living With a Star Program Space Environment Testbed

    Science.gov (United States)

    Barth, Janet; Day, John H. (Technical Monitor)

    2001-01-01

    This viewgraph presentation describes the objective, approach, and scope of the Living With a Star (LWS) program at the Marshall Space Flight Center. Scientists involved in the project seek to refine the understanding of space weather and the role of solar variability in terrestrial climate change. Research and the development of improved analytic methods have led to increased predictive capabilities and the improvement of environment specification models. Specifically, the Space Environment Testbed (SET) project of LWS is responsible for the implementation of improved engineering approaches to observing solar effects on climate change. This responsibility includes technology development, ground test protocol development, and the development of a technology application model/engineering tool.

  14. Learning Programming with IPRO: The Effects of a Mobile, Social Programming Environment

    Science.gov (United States)

    Martin, Taylor; Berland, Matthew; Benton, Tom; Smith, Carmen Petrick

    2013-01-01

    In this paper, we present two studies examining how high school students learn to program in a mobile, social programming environment that we have developed and deployed ("IPRO"). IPRO is delivered, with an associated curriculum, as an iPod Touch app and is freely and publicly available. We find that the affordances of mobility and…

  15. ANALYSIS OF VIRTUAL ENVIRONMENT BENEFIT IN E-LEARNING

    Directory of Open Access Journals (Sweden)

    NOVÁK, Martin

    2013-06-01

    Full Text Available The analysis of the virtual environment assets towards the e-learning process improvements is mentioned in this article. The virtual environment was created within the solution of the project ‘Virtualization’ at the Faculty of Economics and Administration, University of Pardubice. The aim of this project was to eliminate the disproportion of free access to licensed software between groups of part-time and full-time students. The research was realized within selected subjects of the study program System Engineering and Informatics. The subjects were connected to the informatics, applied informatics, control and decision making. Student subject results, student feedback based on electronic questionnaire and data from log file of virtual server usage were compared and analysed. Based on analysis of virtualization possibilities the solution of virtual environment was implemented through Microsoft Terminal Server.

  16. An Analysis of Programming Beginners' Source Programs

    Science.gov (United States)

    Matsuyama, Chieko; Nakashima, Toyoshiro; Ishii, Naohiro

    The production of animations was made the subject of a university programming course in order to make students understand the process of program creation, and so that students could tackle programming with interest. In this paper, the formats and composition of the programs which students produced were investigated. As a result, it was found that there were a lot of problems related to such matters as how to use indent, how to apply comments and functions etc. for the format and the composition of the source codes.

  17. A Program Transformation for Backwards Analysis of Logic Programs

    DEFF Research Database (Denmark)

    Gallagher, John Patrick

    2003-01-01

    The input to backwards analysis is a program together with properties that are required to hold at given program points. The purpose of the analysis is to derive initial goals or pre-conditions that guarantee that, when the program is executed, the given properties hold. The solution for logic...... programs presented here is based on a transformation of the input program, which makes explicit the dependencies of the given program points on the initial goals. The transformation is derived from the resultants semantics of logic programs. The transformed program is then analysed using a standard...

  18. DICE: An Object Oriented Programming Environment for Cooperative Engineering Design

    Science.gov (United States)

    1989-03-20

    environment called PARMENIDES /FRULEKIT; PARMENIDES /FRULEKIT supports programming in frames and rules and was developed in LISP at Carnegie-Mellon...the domain of building design and construction. The Blackboard in DICEY-BUILDER is represented as frames in PARMENIDES , while the KMs are implemented... PARMENIDES fo rart omat format d a b C /envelope BLACKBOAR D machine to machine (’BLACKBOARD l m message f il transfer message p read •d message format J

  19. Fostering computational thinking skills with a tangible blocks programming environment

    OpenAIRE

    Turchi, T; Malizia, A

    2016-01-01

    Computational Thinking has recently returned into the limelight as an essential skill to have for both the general public and disciplines outside Computer Science. It encapsulates those thinking skills integral to solving complex problems using a computer, thus widely applicable in our technological society. Several public initiatives such as the Hour of Code successfully introduced it to millions of people of different ages and backgrounds, mostly using Blocks Programming Environments like S...

  20. TREEFINDER: a powerful graphical analysis environment for molecular phylogenetics

    Directory of Open Access Journals (Sweden)

    von Haeseler Arndt

    2004-06-01

    Full Text Available Abstract Background Most analysis programs for inferring molecular phylogenies are difficult to use, in particular for researchers with little programming experience. Results TREEFINDER is an easy-to-use integrative platform-independent analysis environment for molecular phylogenetics. In this paper the main features of TREEFINDER (version of April 2004 are described. TREEFINDER is written in ANSI C and Java and implements powerful statistical approaches for inferring gene tree and related analyzes. In addition, it provides a user-friendly graphical interface and a phylogenetic programming language. Conclusions TREEFINDER is a versatile framework for analyzing phylogenetic data across different platforms that is suited both for exploratory as well as advanced studies.

  1. Assertion checking environment (ACE) for formal verification of C programs

    International Nuclear Information System (INIS)

    Sharma, Babita; Dhodapkar, S.D.; Ramesh, S.

    2003-01-01

    In this paper we describe an Assertion Checking Environment (ACE) for compositional verification of programs, which are written in an industrially sponsored safe subset of C programming language called MISRA C [Guidelines for the Use of the C Language in Vehicle Based Software, 1998]. The theory is based on Hoare logic [Commun. ACM 12 (1969) 576] and the C programs are verified using static assertion checking technique. First the functional specifications of the program, captured in the form of pre- and post-conditions for each C function, are derived from the specifications. These pre- and post-conditions are then introduced as assertions (also called annotations or formal comments) in the program code. The assertions are then proved formally using ACE and theorem proving tool called Stanford Temporal Prover [The Stanford Temporal Prover User's Manual, 1998]. ACE has been developed by us and consists mainly of a translator c2spl, a GUI and some utility programs. The technique and tools developed are targeted towards verification of real-time embedded software

  2. Food, Environment, Engineering and Life Sciences Program (Invited)

    Science.gov (United States)

    Mohtar, R. H.; Whittaker, A.; Amar, N.; Burgess, W.

    2009-12-01

    Food, Environment, Engineering and Life Sciences Program Nadia Amar, Wiella Burgess, Rabi H. Mohtar, and Dale Whitaker Purdue University Correspondence: mohtar@purdue.edu FEELS, the Food, Environment, Engineering and Life Sciences Program is a grant of the National Science Foundation for the College of Agriculture at Purdue University. FEELS’ mission is to recruit, retain, and prepare high-achieving students with financial difficulties to pursue STEM (Science, Technology, Engineering, and Mathematics) careers. FEELS achieves its goals offering a scholarship of up to 10,000 per student each year, academic, research and industrial mentors, seminars, study tables, social and cultural activities, study abroad and community service projects. In year one, nine low-income, first generation and/or ethnic minority students joined the FEELS program. All 9 FEELS fellows were retained in Purdue’s College of Agriculture (100%) with 7 of 9 (77.7%) continuing to pursue STEM majors. FEELS fellows achieved an average GPA in their first year of 3.05, compared to the average GPA of 2.54 for low-income non- FEELS students in the College of Agriculture. A new cohort of 10 students joined the program in August 2009. FEELS fellows received total scholarships of nearly 50,000 for the 2008-2009 academic year. These scholarships were combined with a holistic program that included the following key elements: FEELS Freshman Seminars I and II, 2 study tables per week, integration activities and frequent meetings with FEELS academic mentors and directors. Formative assessments of all FEELS activities were used to enhance the first year curriculum for the second cohort. Cohort 1 will continue into their second year where the focus will be on undergraduate research. More on FEELS programs and activities: www.purdue.edu/feels.

  3. A versatile Moessbauer analysis program

    International Nuclear Information System (INIS)

    Jernberg, P.; Sundqvist, T.

    1983-06-01

    MDA - Moessbauer Data Analysis, is a user oriented computer program, aiming to simulate a Moessbauer transmission spectrum, given by a set of parameters, and compare it with experimental data. The calculation considers a number of experimental situations and the comparisons can be made by least squares sums or by plotting the simulated and the measured spectrum. A fitting routine, minimizing the least squares sum, can be used to find the parameters characterizing the measured spectrum.(author)

  4. Computer network environment planning and analysis

    Science.gov (United States)

    Dalphin, John F.

    1989-01-01

    The GSFC Computer Network Environment provides a broadband RF cable between campus buildings and ethernet spines in buildings for the interlinking of Local Area Networks (LANs). This system provides terminal and computer linkage among host and user systems thereby providing E-mail services, file exchange capability, and certain distributed computing opportunities. The Environment is designed to be transparent and supports multiple protocols. Networking at Goddard has a short history and has been under coordinated control of a Network Steering Committee for slightly more than two years; network growth has been rapid with more than 1500 nodes currently addressed and greater expansion expected. A new RF cable system with a different topology is being installed during summer 1989; consideration of a fiber optics system for the future will begin soon. Summmer study was directed toward Network Steering Committee operation and planning plus consideration of Center Network Environment analysis and modeling. Biweekly Steering Committee meetings were attended to learn the background of the network and the concerns of those managing it. Suggestions for historical data gathering have been made to support future planning and modeling. Data Systems Dynamic Simulator, a simulation package developed at NASA and maintained at GSFC was studied as a possible modeling tool for the network environment. A modeling concept based on a hierarchical model was hypothesized for further development. Such a model would allow input of newly updated parameters and would provide an estimation of the behavior of the network.

  5. Subseabed-disposal program: systems-analysis program plan

    International Nuclear Information System (INIS)

    Klett, R.D.

    1981-03-01

    This report contains an overview of the Subseabed Nuclear Waste Disposal Program systems analysis program plan, and includes sensitivity, safety, optimization, and cost/benefit analyses. Details of the primary barrier sensitivity analysis and the data acquisition and modeling cost/benefit studies are given, as well as the schedule through the technical, environmental, and engineering feasibility phases of the program

  6. AutoMicromanager: A microscopy scripting toolkit for LABVIEW and other programming environments

    Science.gov (United States)

    Ashcroft, Brian Alan; Oosterkamp, Tjerk

    2010-11-01

    We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

  7. AutoMicromanager: a microscopy scripting toolkit for LABVIEW and other programming environments.

    Science.gov (United States)

    Ashcroft, Brian Alan; Oosterkamp, Tjerk

    2010-11-01

    We present a scripting toolkit for the acquisition and analysis of a wide variety of imaging data by integrating the ease of use of various programming environments such as LABVIEW, IGOR PRO, MATLAB, SCILAB, and others. This toolkit is designed to allow the user to quickly program a variety of standard microscopy components for custom microscopy applications allowing much more flexibility than other packages. Included are both programming tools as well as graphical user interface classes allowing a standard, consistent, and easy to maintain scripting environment. This programming toolkit allows easy access to most commonly used cameras, stages, and shutters through the Micromanager project so the scripter can focus on their custom application instead of boilerplate code generation.

  8. Aviation Safety Program Atmospheric Environment Safety Technologies (AEST) Project

    Science.gov (United States)

    Colantonio, Ron

    2011-01-01

    Engine Icing: Characterization and Simulation Capability: Develop knowledge bases, analysis methods, and simulation tools needed to address the problem of engine icing; in particular, ice-crystal icing Airframe Icing Simulation and Engineering Tool Capability: Develop and demonstrate 3-D capability to simulate and model airframe ice accretion and related aerodynamic performance degradation for current and future aircraft configurations in an expanded icing environment that includes freezing drizzle/rain Atmospheric Hazard Sensing and Mitigation Technology Capability: Improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena

  9. NET-2 Network Analysis Program

    International Nuclear Information System (INIS)

    Malmberg, A.F.

    1974-01-01

    The NET-2 Network Analysis Program is a general purpose digital computer program which solves the nonlinear time domain response and the linearized small signal frequency domain response of an arbitrary network of interconnected components. NET-2 is capable of handling a variety of components and has been applied to problems in several engineering fields, including electronic circuit design and analysis, missile flight simulation, control systems, heat flow, fluid flow, mechanical systems, structural dynamics, digital logic, communications network design, solid state device physics, fluidic systems, and nuclear vulnerability due to blast, thermal, gamma radiation, neutron damage, and EMP effects. Network components may be selected from a repertoire of built-in models or they may be constructed by the user through appropriate combinations of mathematical, empirical, and topological functions. Higher-level components may be defined by subnetworks composed of any combination of user-defined components and built-in models. The program provides a modeling capability to represent and intermix system components on many levels, e.g., from hole and electron spatial charge distributions in solid state devices through discrete and integrated electronic components to functional system blocks. NET-2 is capable of simultaneous computation in both the time and frequency domain, and has statistical and optimization capability. Network topology may be controlled as a function of the network solution. (U.S.)

  10. DEGAS: Dynamic Exascale Global Address Space Programming Environments

    Energy Technology Data Exchange (ETDEWEB)

    Demmel, James [Univ. of California, Berkeley, CA (United States)

    2018-02-23

    The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speed and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speed and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics.

  11. Bioprospecting and Functional Analysis of Neglected Environments

    DEFF Research Database (Denmark)

    Vogt, Josef Korbinian

    on Biological Diversity (explained in Chapter 3). Proteolytic enzymes – described in Chapter 4 – are the target for bioprospecting due to their high market value. Section II describes methods used for the analysis of metagenomic and RNA-seq datasets, including Manuscript I, which includes the taxonomic...... of arctic marine metagenomes reveals bacterial strategies for deep sea persistence (Manuscript II). Furthermore, this extreme environment is a fertile ground to mine for novel proteolytic enzymes. Manuscript III presents a bioinformatics approach to identify sequences for potential commercialization...

  12. Social network analysis of study environment

    Directory of Open Access Journals (Sweden)

    Blaženka Divjak

    2010-06-01

    Full Text Available Student working environment influences student learning and achievement level. In this respect social aspects of students’ formal and non-formal learning play special role in learning environment. The main research problem of this paper is to find out if students' academic performance influences their position in different students' social networks. Further, there is a need to identify other predictors of this position. In the process of problem solving we use the Social Network Analysis (SNA that is based on the data we collected from the students at the Faculty of Organization and Informatics, University of Zagreb. There are two data samples: in the basic sample N=27 and in the extended sample N=52. We collected data on social-demographic position, academic performance, learning and motivation styles, student status (full-time/part-time, attitudes towards individual and teamwork as well as informal cooperation. Afterwards five different networks (exchange of learning materials, teamwork, informal communication, basic and aggregated social network were constructed. These networks were analyzed with different metrics and the most important were betweenness, closeness and degree centrality. The main result is, firstly, that the position in a social network cannot be forecast only by academic success and, secondly, that part-time students tend to form separate groups that are poorly connected with full-time students. In general, position of a student in social networks in study environment can influence student learning as well as her/his future employability and therefore it is worthwhile to be investigated.

  13. Conducting a SWOT Analysis for Program Improvement

    Science.gov (United States)

    Orr, Betsy

    2013-01-01

    A SWOT (strengths, weaknesses, opportunities, and threats) analysis of a teacher education program, or any program, can be the driving force for implementing change. A SWOT analysis is used to assist faculty in initiating meaningful change in a program and to use the data for program improvement. This tool is useful in any undergraduate or degree…

  14. XML Graphs in Program Analysis

    DEFF Research Database (Denmark)

    Møller, Anders; Schwartzbach, Michael Ignatieff

    2007-01-01

    XML graphs have shown to be a simple and effective formalism for representing sets of XML documents in program analysis. It has evolved through a six year period with variants tailored for a range of applications. We present a unified definition, outline the key properties including validation...... of XML graphs against different XML schema languages, and provide a software package that enables others to make use of these ideas. We also survey four very different applications: XML in Java, Java Servlets and JSP, transformations between XML and non-XML data, and XSLT....

  15. Safeguard Vulnerability Analysis Program (SVAP)

    International Nuclear Information System (INIS)

    Gilman, F.M.; Dittmore, M.H.; Orvis, W.J.; Wahler, P.S.

    1980-01-01

    This report gives an overview of the Safeguard Vulnerability Analysis Program (SVAP) developed at Lawrence Livermore National Laboratory. SVAP was designed as an automated method of analyzing the safeguard systems at nuclear facilities for vulnerabilities relating to the theft or diversion of nuclear materials. SVAP addresses one class of safeguard threat: theft or diversion of nuclear materials by nonviolent insiders, acting individually or in collusion. SVAP is a user-oriented tool which uses an interactive input medium for preprocessing the large amounts of safeguards data. Its output includes concise summary data as well as detailed vulnerability information

  16. Compiler and Runtime Support for Programming in Adaptive Parallel Environments

    Science.gov (United States)

    1998-10-15

    noother job is waiting for resources, and use a smaller number of processors when other jobs needresources. Setia et al. [15, 20] have shown that such...15] Vijay K. Naik, Sanjeev Setia , and Mark Squillante. Performance analysis of job scheduling policiesin parallel supercomputing environments. In...on networks ofheterogeneous workstations. Technical Report CSE-94-012, Oregon Graduate Institute of Scienceand Technology, 1994.[20] Sanjeev Setia

  17. Personal Computer Transport Analysis Program

    Science.gov (United States)

    DiStefano, Frank, III; Wobick, Craig; Chapman, Kirt; McCloud, Peter

    2012-01-01

    The Personal Computer Transport Analysis Program (PCTAP) is C++ software used for analysis of thermal fluid systems. The program predicts thermal fluid system and component transients. The output consists of temperatures, flow rates, pressures, delta pressures, tank quantities, and gas quantities in the air, along with air scrubbing component performance. PCTAP s solution process assumes that the tubes in the system are well insulated so that only the heat transfer between fluid and tube wall and between adjacent tubes is modeled. The system described in the model file is broken down into its individual components; i.e., tubes, cold plates, heat exchangers, etc. A solution vector is built from the components and a flow is then simulated with fluid being transferred from one component to the next. The solution vector of components in the model file is built at the initiation of the run. This solution vector is simply a list of components in the order of their inlet dependency on other components. The component parameters are updated in the order in which they appear in the list at every time step. Once the solution vectors have been determined, PCTAP cycles through the components in the solution vector, executing their outlet function for each time-step increment.

  18. Energy Analysis Program. 1992 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    The Program became deeply involved in establishing 4 Washington, D.C., project office diving the last few months of fiscal year 1942. This project office, which reports to the Energy & Environment Division, will receive the majority of its support from the Energy Analysis Program. We anticipate having two staff scientists and support personnel in offices within a few blocks of DOE. Our expectation is that this office will carry out a series of projects that are better managed closer to DOE. We also anticipate that our representation in Washington will improve and we hope to expand the Program, its activities, and impact, in police-relevant analyses. In spite of the growth that we have achieved, the Program continues to emphasize (1) energy efficiency of buildings, (2) appliance energy efficiency standards, (3) energy demand forecasting, (4) utility policy studies, especially integrated resource planning issues, and (5) international energy studies, with considerate emphasis on developing countries and economies in transition. These continuing interests are reflected in the articles that appear in this report.

  19. Multi-Language Programming Environments for High Performance Java Computing

    Directory of Open Access Journals (Sweden)

    Vladimir Getov

    1999-01-01

    Full Text Available Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI tool which provides application programmers wishing to use Java with immediate accessibility to existing scientific packages. The JCI tool also facilitates rapid development and reuse of existing code. These benefits are provided at minimal cost to the programmer. While beneficial to the programmer, the additional advantages of mixed‐language programming in terms of application performance and portability are addressed in detail within the context of this paper. In addition, we discuss how the JCI tool is complementing other ongoing projects such as IBM’s High‐Performance Compiler for Java (HPCJ and IceT’s metacomputing environment.

  20. ASAP- ARTIFICIAL SATELLITE ANALYSIS PROGRAM

    Science.gov (United States)

    Kwok, J.

    1994-01-01

    The Artificial Satellite Analysis Program (ASAP) is a general orbit prediction program which incorporates sufficient orbit modeling accuracy for mission design, maneuver analysis, and mission planning. ASAP is suitable for studying planetary orbit missions with spacecraft trajectories of reconnaissance (flyby) and exploratory (mapping) nature. Sample data is included for a geosynchronous station drift cycle study, a Venus radar mapping strategy, a frozen orbit about Mars, and a repeat ground trace orbit. ASAP uses Cowell's method in the numerical integration of the equations of motion. The orbital mechanics calculation contains perturbations due to non-sphericity (up to a 40 X 40 field) of the planet, lunar and solar effects, and drag and solar radiation pressure. An 8th order Runge-Kutta integration scheme with variable step size control is used for efficient propagation. The input includes the classical osculating elements, orbital elements of the sun relative to the planet, reference time and dates, drag coefficient, gravitational constants, and planet radius, rotation rate, etc. The printed output contains Cartesian coordinates, velocity, equinoctial elements, and classical elements for each time step or event step. At each step, selected output is added to a plot file. The ASAP package includes a program for sorting this plot file. LOTUS 1-2-3 is used in the supplied examples to graph the results, but any graphics software package could be used to process the plot file. ASAP is not written to be mission-specific. Instead, it is intended to be used for most planetary orbiting missions. As a consequence, the user has to have some basic understanding of orbital mechanics to provide the correct input and interpret the subsequent output. ASAP is written in FORTRAN 77 for batch execution and has been implemented on an IBM PC compatible computer operating under MS-DOS. The ASAP package requires a math coprocessor and a minimum of 256K RAM. This program was last

  1. The role of radiation damage analysis in the fusion program

    International Nuclear Information System (INIS)

    Doran, D.G.

    1983-01-01

    The objective of radiation damage analysis is the prediction of the performance of facility components exposed to a radiation environment. The US Magnetic Fusion Energy materials program includes an explicit damage analysis activity within the Damage Analysis and Fundamental Studies (DAFS) Program. Many of the papers in these Proceedings report work done directly or indirectly in support of the DAFS program. The emphasis of this program is on developing procedures, based on an understanding of damage mechanisms, for applying data obtained in diverse radiation environments to the prediction of component behavior in fusion devices. It is assumed that the Fusion Materials Irradiation Test Facility will be available in the late 1980s to test (and calibrate where necessary) correlation procedures to the high fluences expected in commercial reactors. (orig.)

  2. Diving into the consumer nutrition environment: A Bayesian spatial factor analysis of neighborhood restaurant environment.

    Science.gov (United States)

    Luan, Hui; Law, Jane; Lysy, Martin

    2018-02-01

    Neighborhood restaurant environment (NRE) plays a vital role in shaping residents' eating behaviors. While NRE 'healthfulness' is a multi-facet concept, most studies evaluate it based only on restaurant type, thus largely ignoring variations of in-restaurant features. In the few studies that do account for such features, healthfulness scores are simply averaged over accessible restaurants, thereby concealing any uncertainty that attributed to neighborhoods' size or spatial correlation. To address these limitations, this paper presents a Bayesian Spatial Factor Analysis for assessing NRE healthfulness in the city of Kitchener, Canada. Several in-restaurant characteristics are included. By treating NRE healthfulness as a spatially correlated latent variable, the adopted modeling approach can: (i) identify specific indicators most relevant to NRE healthfulness, (ii) provide healthfulness estimates for neighborhoods without accessible restaurants, and (iii) readily quantify uncertainties in the healthfulness index. Implications of the analysis for intervention program development and community food planning are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Easy robot programming for beginners and kids using augmented reality environments

    Science.gov (United States)

    Sakamoto, Kunio; Nishiguchi, Masahiro

    2010-11-01

    The authors have developed the mobile robot which can be programmed by command and instruction cards. All you have to do is to arrange cards on a table and to shot the programming stage by a camera. Our card programming system recognizes instruction cards and translates icon commands into the motor driver program. This card programming environment also provides low-level structure programming.

  4. eXascale PRogramming Environment and System Software (XPRESS)

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Barbara [Univ. of Houston, TX (United States); Gabriel, Edgar [Univ. of Houston, TX (United States)

    2015-11-30

    Exascale systems, with a thousand times the compute capacity of today’s leading edge petascale computers, are expected to emerge during the next decade. Their software systems will need to facilitate the exploitation of exceptional amounts of concurrency in applications, and ensure that jobs continue to run despite the occurrence of system failures and other kinds of hard and soft errors. Adapting computations at runtime to cope with changes in the execution environment, as well as to improve power and performance characteristics, is likely to become the norm. As a result, considerable innovation is required to develop system support to meet the needs of future computing platforms. The XPRESS project aims to develop and prototype a revolutionary software system for extreme-­scale computing for both exascale and strong­scaled problems. The XPRESS collaborative research project will advance the state-­of-­the-­art in high performance computing and enable exascale computing for current and future DOE mission-­critical applications and supporting systems. The goals of the XPRESS research project are to: A. enable exascale performance capability for DOE applications, both current and future, B. develop and deliver a practical computing system software X-­stack, OpenX, for future practical DOE exascale computing systems, and C. provide programming methods and environments for effective means of expressing application and system software for portable exascale system execution.

  5. Rhone-Poulenc claims progress for environment program

    International Nuclear Information System (INIS)

    Back, R.

    1993-01-01

    Rhone-Poulenc (RP; Paris) made further progress last year in its pollution-reducing efforts, under the group's worldwide three-year Environment Plan (1992--1994). The company's water index improved by 15% from 1991 and by 22% from 1990 -- slightly ahead of target. The air index improved 9% from 1991 and 15% from 1990. open-quotes Progress regarding atmospheric emissions is significant, but we wish to go further in order to reach our medium-term objectives,close quotes says RP vice-chairman Jean-Marc Bruel. About 47% of the company's capital spending in 1992 was devoted to these emissions. The solid waste index remained static, with an improvement of 1% compared with an 18% advance in 1991. The startup of incineration units in 1993 will help correct this situation. Bruel reiterates the group's established goal of a 50% reduction in all effluent and solid waste by 1995, and 65% by 2000, using 1990 as the base year for its environment index. He says the indices have been adopted by the French chemical industry association -- Union des Industries Chimiques -- and the U.K.'s Chemical Industries Association. RP's environment-related expenditures in 1992 amounted to F1.8 billion ($330 million), of which F1.2 billion was for operating expenses and the remainder for new investments. Expenditures in France were F594 million and F479 million, respectively; the US, F381 million and F122 million; and Brazil F64 million and F14 million. Spending is forecast to be at a similar level in 1993. Environmental research, with spending of F5.8 billion in 1992, is integrated into all the group's research programs

  6. A program for activation analysis data processing

    International Nuclear Information System (INIS)

    Janczyszyn, J.; Loska, L.; Taczanowski, S.

    1978-01-01

    An ALGOL program for activation analysis data handling is presented. The program may be used either for single channel spectrometry data or for multichannel spectrometry. The calculation of instrumental error and of analysis standard deviation is carried out. The outliers are tested, and the regression line diagram with the related observations are plotted by the program. (author)

  7. Software requirements specification for the program analysis and control system risk management module

    International Nuclear Information System (INIS)

    SCHAEFER, J.C.

    1999-01-01

    TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

  8. State of the environment: selected topics, 1979. [Annual report of Executive Director, UN Environment Program

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This annual report of the Executive Director, UN Environment Program, to the Governing Council of the United Nations focuses on four topics of global significance: schistosomiasis, pesticide resistance, noise pollution, and tourism. The four topics, while not the only urgent ones, are important contemporary problems associated with the impacts of development and environmental management. The pressures of man's efforts to increase the agricultural base through irrigation and chemical pesticides have resulted in an unprecedented spread of infectious schistosomiasis and pesticide pollution. Industrialization and urbanization have raised noise levels until they represent serious health hazards. International tourism has grown to such proportions that hundreds of millions of individual trips are taken by the average public each year. The positive and negative aspects of these developments are examined in hopes of stimulating discussions that will lead to more desirable planning and management. 81 references. (DCK)

  9. Cross-platform validation and analysis environment for particle physics

    Science.gov (United States)

    Chekanov, S. V.; Pogrebnyak, I.; Wilbern, D.

    2017-11-01

    A multi-platform validation and analysis framework for public Monte Carlo simulation for high-energy particle collisions is discussed. The front-end of this framework uses the Python programming language, while the back-end is written in Java, which provides a multi-platform environment that can be run from a web browser and can easily be deployed at the grid sites. The analysis package includes all major software tools used in high-energy physics, such as Lorentz vectors, jet algorithms, histogram packages, graphic canvases, and tools for providing data access. This multi-platform software suite, designed to minimize OS-specific maintenance and deployment time, is used for online validation of Monte Carlo event samples through a web interface.

  10. R AS THE ENVIRONMENT FOR DATA ANALYSIS IN PSYCHOLOGICAL EVALUATION

    Directory of Open Access Journals (Sweden)

    Ana María Ruiz-Ruano

    2016-01-01

    Full Text Available R is a free computing environment for statistical data analysis and graph creation. It is becoming a key tool in a wide range of knowledge domains. The interaction with the software is mainly based on a command line interface but efforts are currently being made to develop friendlier graphical user interfaces that will help novice users to become familiar with this programming language. R is a flexible and powerful system thanks to the development community that is working together to improve its capabilities. As a result, it is the chosen statistical software in many applied and basic contexts. This paper highlights the potential usefulness of R for psychological assessment and related areas. Additionally, the relevance of statistical data analysis is emphasised as an instrument that will boost the progress of psychology under the umbrella of the scientific method.

  11. Water Quality Analysis Simulation Program (WASP)

    Science.gov (United States)

    The Water Quality Analysis Simulation Program (WASP) model helps users interpret and predict water quality responses to natural phenomena and manmade pollution for various pollution management decisions.

  12. Damage analysis and fundamental studies program. Paper 78-97

    International Nuclear Information System (INIS)

    Doran, D.G.; Reuther, T.C.; Robinson, M.T.

    1978-01-01

    The Damage Analysis and Fundamental Studies (DAFS) Task Group has been formed by the Office of Fusion Energy to develop procedures for applying data obtained in various irradiation test facilities to projected fusion environments. A long-range program plan has been prepared and implementation has begun. The plan and technical status are briefly described

  13. Damage analysis and fundamental studies program. Paper 78-97

    Energy Technology Data Exchange (ETDEWEB)

    Doran, D G; Reuther, T C; Robinson, M T

    1978-01-01

    The Damage Analysis and Fundamental Studies (DAFS) Task Group has been formed by the Office of Fusion Energy to develop procedures for applying data obtained in various irradiation test facilities to projected fusion environments. A long-range program plan has been prepared and implementation has begun. The plan and technical status are briefly described.

  14. 76 FR 11310 - Alternatives Analysis Program Discretionary Funding Allocations

    Science.gov (United States)

    2011-03-01

    ... information on the Alternatives Analysis Program, contact Kenneth Cervenka, Office of Planning and Environment... Island, and Vermont. Mexico and Texas. Brigid Hynes-Cherin, Regional Mokhtee Ahmad, Regional............ City of Minneapolis...... Nicollet-Central Urban 900,000 Circulator. MN D2010-ALTA-09005...

  15. A mixed-methods exploration of an environment for learning computer programming

    Directory of Open Access Journals (Sweden)

    Richard Mather

    2015-08-01

    Full Text Available A mixed-methods approach is evaluated for exploring collaborative behaviour, acceptance and progress surrounding an interactive technology for learning computer programming. A review of literature reveals a compelling case for using mixed-methods approaches when evaluating technology-enhanced-learning environments. Here, ethnographic approaches used for the requirements engineering of computing systems are combined with questionnaire-based feedback and skill tests. These are applied to the ‘Ceebot’ animated 3D learning environment. Video analysis with workplace observation allowed detailed inspection of problem solving and tacit behaviours. Questionnaires and knowledge tests provided broad sample coverage with insights into subject understanding and overall response to the learning environment. Although relatively low scores in programming tests seemingly contradicted the perception that Ceebot had enhanced understanding of programming, this perception was nevertheless found to be correlated with greater test performance. Video analysis corroborated findings that the learning environment and Ceebot animations were engaging and encouraged constructive collaborative behaviours. Ethnographic observations clearly captured Ceebot's value in providing visual cues for problem-solving discussions and for progress through sharing discoveries. Notably, performance in tests was most highly correlated with greater programming practice (p≤0.01. It was apparent that although students had appropriated technology for collaborative working and benefitted from visual and tacit cues provided by Ceebot, they had not necessarily deeply learned the lessons intended. The key value of the ‘mixed-methods’ approach was that ethnographic observations captured the authenticity of learning behaviours, and thereby strengthened confidence in the interpretation of questionnaire and test findings.

  16. Application of high level programs in a controls environment

    International Nuclear Information System (INIS)

    Kost, C.J.; Mouat, M.; Dohan, D.A.

    1987-01-01

    Highly interactive display utilities, operating on a VAX/VMS computer system, have been usefully interfaced to the controls environment of the TRIUMF cyclotron. Machine data is acquired by a VAX-CAMAC interface, an is passed to these utilities in an efficient manner by memory mapping to global sections for on-line manipulation. The data can also be readily analyzed off-line by operators with the user-friendly command driven utilities OPDATA and PLOTDATA which permit the user to obtain graphics output on a variety of terminal and hardcopy devices using device independent metafiles. Sample applications show the usefulness of these utilities for a wide range of tasks, such as real-time simulation of trim-coil tuning on the beam phase history, and semi-on-line analysis of radial probe data

  17. IRST infrared background analysis of bay environments

    CSIR Research Space (South Africa)

    Schwering, PBW

    2008-04-01

    Full Text Available Present-day naval operations take place in coastal environments as well as narrow straits all over the world. Coastal environments around the world are exhibiting a number of threats to naval forces. In particular a large number of asymmetric...

  18. Programming Sustainable Urban Nodes for Spontaneous, Intensive Urban Environments

    Science.gov (United States)

    Szubryt-Obrycka, Adriana

    2017-10-01

    functional programming (services). Then, the aspect of permanence or temporality will be addressed to determine the choice of appropriate technologies used in order to convey programmatic assertions into physical solutions. The nodes are meant to be as lightweight installments in the area as possible, but at the same time as durable and of good quality as to support positive social effects and reinforce building social capital in the area. The author believe that this emergency-based AT node scenario can be extrapolated to unbalanced housing areas being the result of urban sprawl, after being only slightly adjusted to local standards. But the main goal is to allow for efficient interventions in areas in dire needs and poor environments with limited resources or limited funds.

  19. Program Analysis as Model Checking

    DEFF Research Database (Denmark)

    Olesen, Mads Chr.

    Software programs are proliferating throughout modern life, to a point where even the simplest appliances such as lightbulbs contain software, in addition to the software embedded in cars and airplanes. The correct functioning of these programs is therefore of the utmost importance, for the quality...

  20. A computer program for activation analysis

    International Nuclear Information System (INIS)

    Rantanen, J.; Rosenberg, R.J.

    1983-01-01

    A computer program for calculating the results of activation analysis is described. The program comprises two gamma spectrum analysis programs, STOAV and SAMPO and one program for calculating elemental concentrations, KVANT. STOAV is based on a simple summation of channels and SAMPO is based on fitting of mathematical functions. The programs are tested by analyzing the IAEA G-1 test spectra. In the determination of peak location SAMPO is somewhat better than STOAV and in the determination of peak area SAMPO is more than twice as accurate as STOAV. On the other hand, SAMPO is three times as expensive as STOAV with the use of a Cyber 170 computer. (author)

  1. Design Program in Graphic User Interface Environment for Automobile ER Devices

    Science.gov (United States)

    Lim, S. C.; Park, J. S.; Sohn, J. W.; Choi, S. B.

    This work presents a design and analysis program for vehicle devices utilizing an electrorheological (ER) fluid. The program is operated in graphic user interface (GUI) environment and the initial window is consisted of four subprogram modules which are related to ER shock absorber, ER seat damper, ER engine mount, and ER anti-lock brake system (ABS), respectively. In order to execute each module, both material properties and design parameters are to be chosen by the user. Then, the output display window shows the field-dependent performance characteristics to be considered as design criteria. In addition, control performances of the vehicle system equipped with ER devices are displayed in time and frequency domain. In order to demonstrate the effectiveness of the proposed program, ER shock absorber and ER ABS are designed and manufactured and their performance characteristics are evaluated.

  2. Environment, Safety, Health, and Quality Plan for the Buried Waste Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Walker, S.

    1994-05-01

    The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy Office of Technology Development. BWID supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. This document describes the Environment, Safety, Health, and Quality requirements for conducting BWID activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to BWID operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program Plans, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and System and Performance audits as they apply to the BWID Program

  3. Built Environment Analysis Tool: April 2013

    Energy Technology Data Exchange (ETDEWEB)

    Porter, C.

    2013-05-01

    This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

  4. RAWS II: A MULTIPLE REGRESSION ANALYSIS PROGRAM,

    Science.gov (United States)

    This memorandum gives instructions for the use and operation of a revised version of RAWS, a multiple regression analysis program. The program...of preprocessed data, the directed retention of variable, listing of the matrix of the normal equations and its inverse, and the bypassing of the regression analysis to provide the input variable statistics only. (Author)

  5. Probabilistic Output Analysis by Program Manipulation

    DEFF Research Database (Denmark)

    Rosendahl, Mads; Kirkeby, Maja Hanne

    2015-01-01

    The aim of a probabilistic output analysis is to derive a probability distribution of possible output values for a program from a probability distribution of its input. We present a method for performing static output analysis, based on program transformation techniques. It generates a probability...

  6. Status of CHAP: composite HTGR analysis program

    International Nuclear Information System (INIS)

    Secker, P.A.; Gilbert, J.S.

    1975-12-01

    Development of an HTGR accident simulation program is in progress for the prediction of the overall HTGR plant transient response to various initiating events. The status of the digital computer program named CHAP (Composite HTGR Analysis Program) as of June 30, 1975, is given. The philosophy, structure, and capabilities of the CHAP code are discussed. Mathematical descriptions are given for those HTGR components that have been modeled. Component model validation and evaluation using auxiliary analysis codes are also discussed

  7. Program director and chief resident perspectives on the educational environment of US radiation oncology programs.

    Science.gov (United States)

    Berriochoa, Camille; Weller, Michael; Berry, Danielle; Reddy, Chandana A; Koyfman, Shlomo; Tendulkar, Rahul

    Our goals were toexamine the educational approachesused at radiation oncology residency programs nationwide andto evaluate program director(PD) and chief resident (CR) perceptions of their educational environment. We distributed a survey regarding curricular structure via email toall identified US radiation oncology residency PDs and CRs. Pearson χ 2 test was used toevaluate whether differences existed between answers provided by the 2 study populations. The survey was disseminated to 200 individuals in 85 US residency programs: 49/85PDs(58%)and 74/115 (64%)CRs responded. More than one-half of PDs and CRs report that attending physicians discussed management, reviewed contours, and conducted mock oral board examinations with the residents. At nearly 50% of programs, the majority of teaching conferences use a lecture-based approach, whereas only 20% reported predominant utilization of the Socratic method. However, both PDs (63%) and CRs (49%) reported that Socratic teaching is more effective than didactic lectures (16% and 20%, respectively), with the remainder responding that they are equally effective. Teaching sessions were reported to be resident-led ≥75% of the time by 50% of CRs versus 18% of PDs (P = .002). Significantly more CRs than PDs felt that faculty-led teaching conferences were more effective than resident-led conferences (62% vs 26%, respectively; P Socratic-based teaching conferences. Increased communication between PDs and CRs can better align perceptions with educational goals. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

  8. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, B.W.; Wilkinson, M.J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium environmental data for use in risk assessments and the status of research programs being conducted by various organizations related to the behavior of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments. 19 refs., 2 figs., 1 tab

  9. Sample triage : an overview of Environment Canada's program

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, P.; Goldthorp, M.; Fingas, M. [Environment Canada, Ottawa, ON (Canada). Emergencies Science and Technology Division, Environmental Technology Centre, Science and Technology Branch

    2006-07-01

    The Chemical, biological and radiological/nuclear Research and Technology Initiative (CRTI) is a program led by Canada's Department of National Defence in an effort to improve the capability of providing technical and analytical support in the event of a terrorist-related event. This paper summarized the findings from the CRTI Sample Triage Working Group and reviewed information on Environment Canada's triage program and its' mobile sample inspection facility that was designed to help examine samples of hazardous materials in a controlled environment to minimize the risk of exposure. A sample triage program is designed to deal with administrative, health and safety issues by facilitating the safe transfer of samples to an analytical laboratory. It refers to the collation of all results including field screening information, intelligence and observations for the purpose of prioritizing and directing the sample to the appropriate laboratory for analysis. A central component of Environment Canada's Emergency Response Program has been its capacity to respond on site during an oil or chemical spill. As such, the Emergencies Science and Technology Division has acquired a new mobile sample inspection facility in 2004. It is constructed to work with a custom designed decontamination unit and Ford F450 tow vehicle. The criteria and general design of the trailer facility was described. This paper also outlined the steps taken following a spill of hazardous materials into the environment so that potentially dangerous samples could be safety assessed. Several field trials will be carried out in order to develop standard operating procedures for the mobile sample inspection facility. 6 refs., 6 figs., 4 appendices.

  10. 77 FR 48527 - National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE...

    Science.gov (United States)

    2012-08-14

    ... National Customs Automation Program (NCAP) test concerning the simplified entry functionality in the... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE) Simplified Entry: Modification of...

  11. Program Management Challenges in a Joint Service Environment

    National Research Council Canada - National Science Library

    Taneyhill, Dorothy E

    2007-01-01

    ... or modifications of the same design. The Interim Defense Acquisition Guidebook defines a Joint Program Management Office as any defense acquisition system, subsystem, component, or technology program that involves formal management...

  12. Devolution of the Economy and Environment Program for Southeast ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    EEPSEA). EEPSEA is the only program in Southeast Asia dedicated to helping economists and environmental researchers gain expertise in environmental economics research. Since its inception, the program has been managed by IDRC from its ...

  13. Inclusiveness program - a SWOT analysis

    Science.gov (United States)

    Dósa, M.; Szegő, K.

    2017-09-01

    The Inclusiveness Program was created with the aim to integrate currently under-represented countries into the mainstream of European planetary research. Main stages of the working plan include setting up a database containing all the research institutes and universities where astronomical or geophysical research is carried out. It is necessary to identify their problems and needs. Challenging part of the project is to find exact means that help their work in a sustainable way. Strengths, weaknesses, opportunities and threats of the program were identified based on feedback from the inclusiveness community. Our conclusions, further suggestions are presented.

  14. Automatically visualise and analyse data on pathways using PathVisioRPC from any programming environment.

    Science.gov (United States)

    Bohler, Anwesha; Eijssen, Lars M T; van Iersel, Martijn P; Leemans, Christ; Willighagen, Egon L; Kutmon, Martina; Jaillard, Magali; Evelo, Chris T

    2015-08-23

    Biological pathways are descriptive diagrams of biological processes widely used for functional analysis of differentially expressed genes or proteins. Primary data analysis, such as quality control, normalisation, and statistical analysis, is often performed in scripting languages like R, Perl, and Python. Subsequent pathway analysis is usually performed using dedicated external applications. Workflows involving manual use of multiple environments are time consuming and error prone. Therefore, tools are needed that enable pathway analysis directly within the same scripting languages used for primary data analyses. Existing tools have limited capability in terms of available pathway content, pathway editing and visualisation options, and export file formats. Consequently, making the full-fledged pathway analysis tool PathVisio available from various scripting languages will benefit researchers. We developed PathVisioRPC, an XMLRPC interface for the pathway analysis software PathVisio. PathVisioRPC enables creating and editing biological pathways, visualising data on pathways, performing pathway statistics, and exporting results in several image formats in multiple programming environments. We demonstrate PathVisioRPC functionalities using examples in Python. Subsequently, we analyse a publicly available NCBI GEO gene expression dataset studying tumour bearing mice treated with cyclophosphamide in R. The R scripts demonstrate how calls to existing R packages for data processing and calls to PathVisioRPC can directly work together. To further support R users, we have created RPathVisio simplifying the use of PathVisioRPC in this environment. We have also created a pathway module for the microarray data analysis portal ArrayAnalysis.org that calls the PathVisioRPC interface to perform pathway analysis. This module allows users to use PathVisio functionality online without having to download and install the software and exemplifies how the PathVisioRPC interface can be

  15. Ethnographic analysis: a study of classroom environments.

    Science.gov (United States)

    Griswold, L A

    1994-05-01

    Occupational therapists assess and adapt an environment to enhance clients' abilities to function. Therapists working in schools may assess several classroom environments in a week. Identifying relevant information in an efficient manner is essential yet presents a challenge for school therapists. In this study, ethnographic research methodology was used to analyze the plethora of data gained from observations in eight classrooms. Three major categories were identified to structure observations: activities, people, and communication. These categories were used to compile a Classroom Observation Guide that gives therapists relevant questions to ask in each category. Using the Classroom Observation Guide, occupational therapists can recommend classroom activities that suit a particular teacher's style. For example, working with a teacher who prefers structural activities with clear time and space boundaries for one specific purpose, a therapist might suggest organized sensorimotor games with a distinct purpose to be carried out for a given time period.

  16. Online public health preparedness training programs: an evaluation of user experience with the technological environment.

    Science.gov (United States)

    Nambisan, Priya

    2010-01-01

    Several public health education programs and government agencies across the country have started offering virtual or online training programs in emergency preparedness for people who are likely to be involved in managing or responding to different types of emergency situations such as natural disasters, epidemics, bioterrorism, etc. While such online training programs are more convenient and cost-effective than traditional classroom-based programs, their success depends to a great extent on the underlying technological environment. Specifically, in an online technological environment, different types of user experiences come in to play-users' utilitarian or pragmatic experience, their fun or hedonic experience, their social experience, and most importantly, their usability experience-and these different user experiences critically shape the program outcomes, including course completion rates. This study adopts a multi-disciplinary approach and draws on theories in human computer interaction, distance learning theories, usability research, and online consumer behavior to evaluate users' experience with the technological environment of an online emergency preparedness training program and discusses its implications for the design of effective online training programs. . Data was collected using a questionnaire from 377 subjects who had registered for and participated in online public health preparedness training courses offered by a large public university in the Northeast. Analysis of the data indicates that as predicted, participants had higher levels of pragmatic and usability experiences compared to their hedonic and sociability experiences. Results also indicate that people who experienced higher levels of pragmatic, hedonic, sociability and usability experiences were more likely to complete the course(s) they registered for compared to those who reported lower levels. The study findings hold important implications for the design of effective online emergency

  17. The PUMA test program and data analysis

    International Nuclear Information System (INIS)

    Han, J.T.; Morrison, D.L.

    1997-01-01

    The PUMA test program is sponsored by the U.S. Nuclear Regulatory Commission to provide data that are relevant to various Boiling Water Reactor phenomena. The author briefly describes the PUMA test program and facility, presents the objective of the program, provides data analysis for a large-break loss-of-coolant accident test, and compares the data with a RELAP5/MOD 3.1.2 calculation

  18. THE ENVIRONMENT OF REGIONAL DEVELOPMENT FINANCIAL ANALYSIS

    OpenAIRE

    Bechis Liviu; MOSCVICIOV Andrei

    2012-01-01

    The paper presents the difference between the two concepts regionalism and regionalization. It also presents the three types of regionalism analysis depending on the dimension and the nature of the relations: regionalism at national level, transnational regionalism and international regionalism analysis.

  19. FEAT - FAILURE ENVIRONMENT ANALYSIS TOOL (UNIX VERSION)

    Science.gov (United States)

    Pack, G.

    1994-01-01

    The Failure Environment Analysis Tool, FEAT, enables people to see and better understand the effects of failures in a system. FEAT uses digraph models to determine what will happen to a system if a set of failure events occurs and to identify the possible causes of a selected set of failures. Failures can be user-selected from either engineering schematic or digraph model graphics, and the effects or potential causes of the failures will be color highlighted on the same schematic or model graphic. As a design tool, FEAT helps design reviewers understand exactly what redundancies have been built into a system and where weaknesses need to be protected or designed out. A properly developed digraph will reflect how a system functionally degrades as failures accumulate. FEAT is also useful in operations, where it can help identify causes of failures after they occur. Finally, FEAT is valuable both in conceptual development and as a training aid, since digraphs can identify weaknesses in scenarios as well as hardware. Digraphs models for use with FEAT are generally built with the Digraph Editor, a Macintosh-based application which is distributed with FEAT. The Digraph Editor was developed specifically with the needs of FEAT users in mind and offers several time-saving features. It includes an icon toolbox of components required in a digraph model and a menu of functions for manipulating these components. It also offers FEAT users a convenient way to attach a formatted textual description to each digraph node. FEAT needs these node descriptions in order to recognize nodes and propagate failures within the digraph. FEAT users store their node descriptions in modelling tables using any word processing or spreadsheet package capable of saving data to an ASCII text file. From within the Digraph Editor they can then interactively attach a properly formatted textual description to each node in a digraph. Once descriptions are attached to them, a selected set of nodes can be

  20. Probabilistic Resource Analysis by Program Transformation

    DEFF Research Database (Denmark)

    Kirkeby, Maja Hanne; Rosendahl, Mads

    2016-01-01

    The aim of a probabilistic resource analysis is to derive a probability distribution of possible resource usage for a program from a probability distribution of its input. We present an automated multi-phase rewriting based method to analyze programs written in a subset of C. It generates...

  1. Evaluating Dynamic Analysis Techniques for Program Comprehension

    NARCIS (Netherlands)

    Cornelissen, S.G.M.

    2009-01-01

    Program comprehension is an essential part of software development and software maintenance, as software must be sufficiently understood before it can be properly modified. One of the common approaches in getting to understand a program is the study of its execution, also known as dynamic analysis.

  2. Fetal programming of blood pressure in a transgenic mouse model of altered intrauterine environment.

    Science.gov (United States)

    Chiossi, Giuseppe; Costantine, Maged M; Tamayo, Esther; Hankins, Gary D V; Saade, George R; Longo, Monica

    2016-12-01

    Nitric oxide is essential in the vascular adaptation to pregnancy, as knockout mice lacking nitric oxide synthase (NOS3) have abnormal utero-placental perfusion, hypertension and growth restriction. We previously showed with ex vivo studies on transgenic animals lacking NOS3 that adverse intrauterine environment alters fetal programming of vascular reactivity in adult offspring. The current research shows that altered vascular reactivity correlates with higher blood pressure in vivo. Our data suggest that higher blood pressure depends on both genetic background (NOS3 deficiency) and uterine environment, becomes more evident with age (> 7 postnatal weeks), activity and stress, is gender specific (preponderant among males), and can be affected by the sleep-awake cycle. In utero or early postnatal life (programming is associated with abnormal blood pressure (BP) profiles in vivo. Mice lacking a functional endothelial nitric oxide synthase (KO, NOS3 -/- ) and wild-type mice (WT, NOS3 +/+ ) were crossbred to generate homozygous NOS3 -/- (KO), maternally derived heterozygous NOS3 +/- (KOM: mother with adverse intrauterine environment from NOS3 deficiency), paternally derived heterozygous NOS3 +/- (KOP: mother with normal in utero milieu) and NOS3 +/+ (WT) litters. BP was measured in vivo at 7, 14 and 21 weeks of age. After univariate analysis, multivariate population-averaged linear regression models were used to identify factors affecting BP. When compared to WT offspring, systolic (SBP), diastolic (DBP) and mean (MAP) BP progressively increased from KOP, to KOM, and peaked among KO (P 7 postnatal weeks), higher locomotor activity, daytime recordings, and recent blood pressure transducer insertion (P < 0.001). Post hoc analysis showed that KOM had higher SBP than KOP (P < 0.05). Our study indicates that adverse intrauterine environment contributes, along with multiple other factors, to account for hypertension; moreover, in utero or early postnatal life may represent

  3. Programming Not Required: Skills and Knowledge for the Digital Library Environment

    Science.gov (United States)

    Howard, Katherine

    2010-01-01

    Education for Library and Information professionals in managing the digital environment has been a key topic for discussion within the LIS environment for some time. However, before designing and implementing a program for digital library education, it is prudent to ensure that the skills and knowledge required to work in this environment are…

  4. The Effect of Peer-Mentoring Program on Nursing Students’ Clinical Environment Stressors

    Directory of Open Access Journals (Sweden)

    F Sardari Kashkooli

    2014-01-01

    Results: There was a significant difference between stress scores before and after of the intervention in both groups (p=0.00. Mean difference of clinical environment stress factors in two groups were not statistically significant (p=0.99. Conclusions: Peer-mentoring program is not significant effective on clinical environment stress reduction. Key Words: Nursing Education, Peer Mentoring, Clinical Environment Stressors

  5. CONSIDERATIONS ON OBJECT-ORIENTED PROGRAMMING ENVIRONMENT AUTOCAD DRAWINGS

    OpenAIRE

    PINTILIE Alexandru; AVRAM Elena Rita

    2015-01-01

    In recent years, Low Cost CAD systems are widespread in the technical world. Currently, the highest-rated CAD system is AutoCAD due to the fact that in association with AutoLISP programming language covered a broad range of production needs. As a high-level programming language, AutoLISP provides an easy and efficient programming technique that leads to automation and parameterization of AutoCAD commands and reduces the time spending for designing the drawings. This paper aims to highlight th...

  6. SimITK: rapid ITK prototyping using the Simulink visual programming environment

    Science.gov (United States)

    Dickinson, A. W. L.; Mousavi, P.; Gobbi, D. G.; Abolmaesumi, P.

    2011-03-01

    The Insight Segmentation and Registration Toolkit (ITK) is a long-established, software package used for image analysis, visualization, and image-guided surgery applications. This package is a collection of C++ libraries, that can pose usability problems for users without C++ programming experience. To bridge the gap between the programming complexities and the required learning curve of ITK, we present a higher-level visual programming environment that represents ITK methods and classes by wrapping them into "blocks" within MATLAB's visual programming environment, Simulink. These blocks can be connected to form workflows: visual schematics that closely represent the structure of a C++ program. Due to the heavily C++ templated nature of ITK, direct interaction between Simulink and ITK requires an intermediary to convert their respective datatypes and allow intercommunication. We have developed a "Virtual Block" that serves as an intermediate wrapper around the ITK class and is responsible for resolving the templated datatypes used by ITK to native types used by Simulink. Presently, the wrapping procedure for SimITK is semi-automatic in that it requires XML descriptions of the ITK classes as a starting point, as this data is used to create all other necessary integration files. The generation of all source code and object code from the XML is done automatically by a CMake build script that yields Simulink blocks as the final result. An example 3D segmentation workflow using cranial-CT data as well as a 3D MR-to-CT registration workflow are presented as a proof-of-concept.

  7. Decision Vulnerability Analysis (DVA) Program

    Science.gov (United States)

    2014-05-01

    31 14 Graphical Representation of the Summary Judgments of the Effectiveness, Vulnerability, and Understanding of the Subsystems’ as Judged by...posed several challenges. Numerous organizational typologies have been suggested over the years ( Robbins , 1994), and these typologies are often based...structure and functioning from a typology perspective ( Robbins , 1994), excerpts from a task analysis that described how the analysts currently performed

  8. Managing Complex Programs in a Post-LSI Environment

    National Research Council Canada - National Science Library

    Mockensturm, Jeffery J

    2008-01-01

    .... External forces played a major role in the evolution of these practices: A defense procurement holiday throughout the 1990s significantly reduced defense procurement spending and commensurate programs to manage...

  9. Multi-Language Programming Environments for High Performance Java Computing

    OpenAIRE

    Vladimir Getov; Paul Gray; Sava Mintchev; Vaidy Sunderam

    1999-01-01

    Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI) tool which provides ...

  10. Raspberry Pi as an environment for learning to program

    OpenAIRE

    Peternel, Darja

    2016-01-01

    The thesis discusses the projects which might encourage primary school children in the third triad to programme when the programming language Scratch becomes too restrictive. Lately, the answer has been to use proper programming languages and microcontrollers, which can be connected to camera, sensors and other devices. With this, children learn the basics of electrical engineering, and are only one step away from creating their own game or a small project. The thesis consists of assignments,...

  11. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, Bart W.; Wilkinson, Martha J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments

  12. Scene analysis in the natural environment

    DEFF Research Database (Denmark)

    Lewicki, Michael S; Olshausen, Bruno A; Surlykke, Annemarie

    2014-01-01

    The problem of scene analysis has been studied in a number of different fields over the past decades. These studies have led to important insights into problems of scene analysis, but not all of these insights are widely appreciated, and there remain critical shortcomings in current approaches th...... ill-posed problems, (2) the ability to integrate and store information across time and modality, (3) efficient recovery and representation of 3D scene structure, and (4) the use of optimal motor actions for acquiring information to progress toward behavioral goals....

  13. Positive School and Classroom Environment: Precursors of Successful Implementation of Positive Youth Development Programs

    Directory of Open Access Journals (Sweden)

    Rachel C. F. Sun

    2008-01-01

    Full Text Available This case study was based on a school where the Tier 1 Program of the Project P.A.T.H.S. was integrated into the formal curriculum. In this case study, an interview with the school principal, vice-principal, and social worker was conducted in order to understand their perceptions of administrative arrangements and issues in the school, implementation characteristics, program effectiveness, program success, and overall impression. Results showed that several positive school and classroom attributes were conducive to program success, including positive school culture and belief in students' potentials, an inviting school environment, an encouraging classroom environment, high involvement of school administrative personnel, and systematic program arrangement.

  14. FAME, the flux analysis and modelling environment

    NARCIS (Netherlands)

    Boele, J.; Olivier, B.G.; Teusink, B.

    2012-01-01

    Background: The creation and modification of genome-scale metabolic models is a task that requires specialized software tools. While these are available, subsequently running or visualizing a model often relies on disjoint code, which adds additional actions to the analysis routine and, in our

  15. Energy Analysis Program 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The Energy Analysis Program has played an active role in the analysis and discussion of energy and environmental issues at several levels. (1) at the international level, with programs as developing scenarios for long-term energy demand in developing countries and organizing leading an analytic effort, ``Energy Efficiency, Developing Countries, and Eastern Europe,`` part of a major effort to increase support for energy efficiency programs worldwide; (2) at national level, the Program has been responsible for assessing energy forecasts and policies affecting energy use (e.g., appliance standards, National Energy Strategy scenarios); and (3) at the state and utility levels, the Program has been a leader in promoting integrated resource utility planning; the collaborative process has led to agreement on a new generation of utility demand-site programs in California, providing an opportunity to use knowledge and analytic techniques of the Program`s researchers. We continue to place highest on analyzing energy efficiency, with particular attention given to energy use in buildings. The Program continues its active analysis of international energy issues in Asia (including China), the Soviet Union, South America, and Western Europe. Analyzing the costs and benefits of different levels of standards for residential appliances continues to be the largest single area of research within the Program. The group has developed and applied techniques for forecasting energy demand (or constructing scenarios) for the United States. We have built a new model of industrial energy demand, are in the process of making major changes in our tools for forecasting residential energy demand, have built an extensive and documented energy conservation supply curve of residential energy use, and are beginning an analysis of energy-demand forecasting for commercial buildings.

  16. Chandra X-ray Data Analysis in Educational Environments

    Science.gov (United States)

    Matilsky, T.; Etkina, E.; Lestition, K.; Mandel, E.; Joye, W.

    2004-12-01

    Recent progress in both software and remote connectivity capabilities have made it possible for authentic data analysis tasks to be presented in a wide range of educational venues. No longer are precollege teachers and students, and interested members of the public limited by their lack of access to the scientific workstations and UNIX-based imaging and analytical software used by the research community. Through a suite of programs that couples a simplified graphical user interface using the "DS9" imaging software with a "virtual observatory" capability that processes the analytical algorithms used by X-ray astronomers, we can access archived Chandra observations and generate images, as well as light curves, energy spectra, power spectra and other common examples of science tasks. The system connects to a remote UNIX server, but the user may be sited on a PC or Mac platform. Furthermore, the use of VNC (a remote desktop display environment) allows a teacher to view, comment on and debug any analysis task in real time, from anywhere in the world, and across any computer platform. This makes these programs especially useful in distance learning settings. We have developed, tested and used these capabilities in a wide variety of educational arenas, from 4 week intensive courses in X-ray astronomy research techniques for precollege students and teachers, to one day teacher enrichment workshops, to modules of classroom activities suitable for precollege grade levels, using a variety of cosmic X-ray sources. Examples using archived Chandra observations will be presented demonstrating the flexibility and usefulness of these resources.

  17. Dynamic analysis program for frame structure

    International Nuclear Information System (INIS)

    Ando, Kozo; Chiba, Toshio

    1975-01-01

    A general purpose computer program named ISTRAN/FD (Isub(HI) STRucture ANalysis/Frame structure, Dynamic analysis) has been developed for dynamic analysis of three-dimensional frame structures. This program has functions of free vibration analysis, seismic response analysis, graphic display by plotter and CRT, etc. This paper introduces ISTRAN/FD; examples of its application are shown with various problems : idealization of the cantilever, dynamic analysis of the main tower of the suspension bridge, three-dimensional vibration in the plate girder bridge, seismic response in the boiler steel structure, and dynamic properties of the underground LNG tank. In this last example, solid elements, in addition to beam elements, are especially used for the analysis. (auth.)

  18. Small Groups in Programmed Environments: Behavioral and Biological Interactions.

    Science.gov (United States)

    1983-04-01

    DISTRIBUTION STATEMENT (of the abettdre entered in Block 20. it differm Iroi Repot) IS. SUPPLEMENTARY NOTES The Pavlovian Journal of Bioloqical Science, in...Experimentation in Controlled Environments: Its Implications for Economic Behavior and Social Poligy Making. Toronto: Alcoholism and Drug Addiction

  19. Analysis on Dynamic Decision-Making Model of the Enterprise Technological Innovation Investment under Uncertain Environment

    Directory of Open Access Journals (Sweden)

    Yong Long

    2012-01-01

    Full Text Available Under the environment of fuzzy factors including the return of market, performance of product, and the demanding level of market, we use the method of dynamic programming and establish the model of investment decision, in technology innovation project of enterprise, based on the dynamic programming. Analysis of the influence caused by the changes of fuzzy uncertainty factors to technological innovation project investment of enterprise.

  20. Scilab and Maxima Environment: Towards Free Software in Numerical Analysis

    Science.gov (United States)

    Mora, Angel; Galan, Jose Luis; Aguilera, Gabriel; Fernandez, Alvaro; Merida, Enrique; Rodriguez, Pedro

    2010-01-01

    In this work we will present the ScilabUMA environment we have developed as an alternative to Matlab. This environment connects Scilab (for numerical analysis) and Maxima (for symbolic computations). Furthermore, the developed interface is, in our opinion at least, as powerful as the interface of Matlab. (Contains 3 figures.)

  1. The nuclear analysis program at MURR

    International Nuclear Information System (INIS)

    Glascock, M.D.

    1993-01-01

    The University of Missouri-Columbia (MU) has continually upgraded research facilities and programs at the MU research reactor (MURR) throughout its 26-yr history. The Nuclear Analysis Program (NAP) area has participated in these upgrades over the years. As one of the largest activation analysis laboratories on a university campus, the activities of the NAP are broadly representative of the diversity of applications for activation analysis and related nuclear science. This paper describes the MURR's NAP and several of the research, education, and service projects in which the laboratory is currently engaged

  2. Widening the scope of incident analysis in complex work environments

    NARCIS (Netherlands)

    Vuuren, van W.; Kanse, L.; Manser, T.

    2003-01-01

    Incident analysis is commonly used as a tooi to provide information on how to improve health and safety in complex work environments. The effectiveness of this tooi, however, depends on how the analysis is actually carried out. The traditional view on incident analysis highlights the role of human

  3. A Knowledge-based Environment for Software Process Performance Analysis

    Directory of Open Access Journals (Sweden)

    Natália Chaves Lessa Schots

    2015-08-01

    Full Text Available Background: Process performance analysis is a key step for implementing continuous improvement in software organizations. However, the knowledge to execute such analysis is not trivial and the person responsible to executing it must be provided with appropriate support. Aim: This paper presents a knowledge-based environment, named SPEAKER, proposed for supporting software organizations during the execution of process performance analysis. SPEAKER comprises a body of knowledge and a set of activities and tasks for software process performance analysis along with supporting tools to executing these activities and tasks. Method: We conducted an informal literature reviews and a systematic mapping study, which provided basic requirements for the proposed environment. We implemented the SPEAKER environment integrating supporting tools for the execution of activities and tasks of performance analysis and the knowledge necessary to execute them, in order to meet the variability presented by the characteristics of these activities. Results: In this paper, we describe each SPEAKER module and the individual evaluations of these modules, and also present an example of use comprising how the environment can guide the user through a specific performance analysis activity. Conclusion: Although we only conducted individual evaluations of SPEAKER’s modules, the example of use indicates the feasibility of the proposed environment. Therefore, the environment as a whole will be further evaluated to verify if it attains its goal of assisting in the execution of process performance analysis by non-specialist people.

  4. Energy Analysis Program 1990 annual report

    International Nuclear Information System (INIS)

    1992-01-01

    The Energy Analysis Program has played an active role in the analysis and discussion of energy and environmental issues at several levels. (1) at the international level, with programs as developing scenarios for long-term energy demand in developing countries and organizing leading an analytic effort, ''Energy Efficiency, Developing Countries, and Eastern Europe,'' part of a major effort to increase support for energy efficiency programs worldwide; (2) at national level, the Program has been responsible for assessing energy forecasts and policies affecting energy use (e.g., appliance standards, National Energy Strategy scenarios); and (3) at the state and utility levels, the Program has been a leader in promoting integrated resource utility planning; the collaborative process has led to agreement on a new generation of utility demand-site programs in California, providing an opportunity to use knowledge and analytic techniques of the Program's researchers. We continue to place highest on analyzing energy efficiency, with particular attention given to energy use in buildings. The Program continues its active analysis of international energy issues in Asia (including China), the Soviet Union, South America, and Western Europe. Analyzing the costs and benefits of different levels of standards for residential appliances continues to be the largest single area of research within the Program. The group has developed and applied techniques for forecasting energy demand (or constructing scenarios) for the United States. We have built a new model of industrial energy demand, are in the process of making major changes in our tools for forecasting residential energy demand, have built an extensive and documented energy conservation supply curve of residential energy use, and are beginning an analysis of energy-demand forecasting for commercial buildings

  5. Energy Analysis Program 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The Energy Analysis Program has played an active role in the analysis and discussion of energy and environmental issues at several levels. (1) at the international level, with programs as developing scenarios for long-term energy demand in developing countries and organizing leading an analytic effort, Energy Efficiency, Developing Countries, and Eastern Europe,'' part of a major effort to increase support for energy efficiency programs worldwide; (2) at national level, the Program has been responsible for assessing energy forecasts and policies affecting energy use (e.g., appliance standards, National Energy Strategy scenarios); and (3) at the state and utility levels, the Program has been a leader in promoting integrated resource utility planning; the collaborative process has led to agreement on a new generation of utility demand-site programs in California, providing an opportunity to use knowledge and analytic techniques of the Program's researchers. We continue to place highest on analyzing energy efficiency, with particular attention given to energy use in buildings. The Program continues its active analysis of international energy issues in Asia (including China), the Soviet Union, South America, and Western Europe. Analyzing the costs and benefits of different levels of standards for residential appliances continues to be the largest single area of research within the Program. The group has developed and applied techniques for forecasting energy demand (or constructing scenarios) for the United States. We have built a new model of industrial energy demand, are in the process of making major changes in our tools for forecasting residential energy demand, have built an extensive and documented energy conservation supply curve of residential energy use, and are beginning an analysis of energy-demand forecasting for commercial buildings.

  6. Space Station Program threat and vulnerability analysis

    Science.gov (United States)

    Van Meter, Steven D.; Veatch, John D.

    1987-01-01

    An examination has been made of the physical security of the Space Station Program at the Kennedy Space Center in a peacetime environment, in order to furnish facility personnel with threat/vulnerability information. A risk-management approach is used to prioritize threat-target combinations that are characterized in terms of 'insiders' and 'outsiders'. Potential targets were identified and analyzed with a view to their attractiveness to an adversary, as well as to the consequentiality of the resulting damage.

  7. Stock-environment recruitment analysis for Namibian Cape hake ...

    African Journals Online (AJOL)

    Stock-environment recruitment analysis for Namibian Cape hake Merluccius capensis. ... The factors modulating recruitment success of Cape hake Merluccius capensis in Namibian waters are still unresolved. ... AJOL African Journals Online.

  8. Analysis Of Aspects Of Messages Hiding In Text Environments

    Directory of Open Access Journals (Sweden)

    Afanasyeva Olesya

    2015-09-01

    Full Text Available In the work are researched problems, which arise during hiding of messages in text environments, being transmitted by electronic communication channels and the Internet. The analysis of selection of places in text environment (TE, which can be replaced by word from the message is performed. Selection and replacement of words in the text environment is implemented basing on semantic analysis of text fragment, consisting of the inserted word, and its environment in TE. For implementation of such analysis is used concept of semantic parameters of words coordination and semantic value of separate word. Are used well-known methods of determination of values of these parameters. This allows moving from quality level to quantitative level analysis of text fragments semantics during their modification by word substitution. Invisibility of embedded messages is ensured by providing preset values of the semantic cooperation parameter deviations.

  9. XPRESS: eXascale PRogramming Environment and System Software

    Energy Technology Data Exchange (ETDEWEB)

    Porterfield, Allan Kennedy [Univ. of North Carolina, Chapel Hill, NC (United States); Fowler, Robert Joseph [Univ. of North Carolina, Chapel Hill, NC (United States)

    2016-08-31

    This is the final report for UNC activities as its part in the XStack program XPRESS project. A project-wide final report will be submitted by the project as a whole through Sandia National Laboratory when the contracts to the other participating organizations have reached their conclusion(s).

  10. Control system design and analysis using the INteractive Controls Analysis (INCA) program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.

    1987-01-01

    The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

  11. Franchising in the banking environment : middle management program / L. Britz

    OpenAIRE

    Britz, Louise

    2005-01-01

    Franchising as a growth tool is becoming a very appealing business model which has highly successful examples in almost every business sector in the world. However in the banking environment, First National Bank has been the first bank to take the lead in South Africa by introducing the franchise concept to create value for its customers. Not all businesses are suitable to become franchises therefore the aim of this research was to establish what critical success factors can be considered as ...

  12. Airland Battlefield Environment (ALBE) Tactical Decision Aid (TDA) Demonstration Program,

    Science.gov (United States)

    1987-11-12

    Management System (DBMS) software, GKS graphics libraries, and user interface software. These components of the ATB system software architecture will be... knowlede base ano auqent the decision mak:n• process by providing infocr-mation useful in the formulation and execution of battlefield strategies...Topographic Laboratories as an Engineer. Ms. Capps is managing the software development of the AirLand Battlefield Environment (ALBE) geographic

  13. Developing Programs for the Business Environment - Economic Policies

    OpenAIRE

    Elena Ilie

    2014-01-01

    In early 2000, in Romania, there wasn’t much of a talk about stimulating business environment and in this case the SMEs (small and medium enterprises). After a transition period, various attempts to implement a financial and logistical support from the state were beginning to bear fruit with the year 2009 and take hold in 2011. Amid all legislative changes occurred, the Romanian state proves its effectiveness regarding Romanian entrepreneurs and especially young people, university graduates d...

  14. An Artificial Intelligence-Based Environment Quality Analysis System

    OpenAIRE

    Oprea , Mihaela; Iliadis , Lazaros

    2011-01-01

    Part 20: Informatics and Intelligent Systems Applications for Quality of Life information Services (ISQLIS) Workshop; International audience; The paper describes an environment quality analysis system based on a combination of some artificial intelligence techniques, artificial neural networks and rule-based expert systems. Two case studies of the system use are discussed: air pollution analysis and flood forecasting with their impact on the environment and on the population health. The syste...

  15. Environmental programs of the Department of Energy and Environment annual highlights

    International Nuclear Information System (INIS)

    Manowitz, B.

    1978-12-01

    Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications

  16. Environmental programs of the Department of Energy and Environment annual highlights

    Energy Technology Data Exchange (ETDEWEB)

    Manowitz, B

    1978-12-01

    Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications.

  17. Lowering the Barriers to Programming: A Survey of Programming Environments and Languages for Novice Programmers

    National Research Council Canada - National Science Library

    Kelleher, Caitlin; Pausch, Randy

    2003-01-01

    .... The systems are organized by their primary goal, either to teach programming or to use programming to empower their users, and then by the authors' approach to making learning to program easier for novice programmers...

  18. Genetic Programming for Sea Level Predictions in an Island Environment

    Directory of Open Access Journals (Sweden)

    M.A. Ghorbani

    2010-03-01

    Full Text Available Accurate predictions of sea-level are important for geodetic applications, navigation, coastal, industrial and tourist activities. In the current work, the Genetic Programming (GP and artificial neural networks (ANNs were applied to forecast half-daily and daily sea-level variations from 12 hours to 5 days ahead. The measurements at the Cocos (Keeling Islands in the Indian Ocean were used for training and testing of the employed artificial intelligence techniques. A comparison was performed of the predictions from the GP model and the ANN simulations. Based on the comparison outcomes, it was found that the Genetic Programming approach can be successfully employed in forecasting of sea level variations.

  19. Protecting Human Health in a Changing Environment: 2018 Summer Enrichment Program

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) in Research Triangle Park, NC is offering a free 1-week Summer Enrichment Program to educate students about how the Agency protects human health and the environment.

  20. Applications of LabVIEW programming in a glovebox environment

    International Nuclear Information System (INIS)

    Evans, M.E.; Peralta, G.; Gray, D.

    1995-01-01

    When dealing with neutron radiation one of the keys to reducing worker exposure is to have as much distance and shielding between the radiation and the radiation worker as possible. Using a PC to control a process from a remote location allows the distance between the radiation worker and the radiation source to be increase. Increasing the distance at which radiation worker can control a process allows more shielding to be placed around the glovebox. There are many commercial packages that allow controlling remote processes with a PC. This paper shows how flexible the LabVIEW Graphical Programming Language can be in implementing the remote control of glovebox process

  1. XPRESS: eXascale PRogramming Environment and System Software

    Energy Technology Data Exchange (ETDEWEB)

    Brightwell, Ron [Louisiana State Univ., Baton Rouge, LA (United States); Sterling, Thomas [Louisiana State Univ., Baton Rouge, LA (United States); Koniges, Alice [Louisiana State Univ., Baton Rouge, LA (United States); Kaiser, Hartmut [Louisiana State Univ., Baton Rouge, LA (United States); Gabriel, Edgar [Louisiana State Univ., Baton Rouge, LA (United States); Porterfield, Allan [Louisiana State Univ., Baton Rouge, LA (United States); Malony, Allen [Louisiana State Univ., Baton Rouge, LA (United States)

    2017-07-14

    The XPRESS Project is one of four major projects of the DOE Office of Science Advanced Scientific Computing Research X-stack Program initiated in September, 2012. The purpose of XPRESS is to devise an innovative system software stack to enable practical and useful exascale computing around the end of the decade with near-term contributions to efficient and scalable operation of trans-Petaflops performance systems in the next two to three years; both for DOE mission-critical applications. To this end, XPRESS directly addresses critical challenges in computing of efficiency, scalability, and programmability through introspective methods of dynamic adaptive resource management and task scheduling.

  2. The clinical learning environment in nursing education: a concept analysis.

    Science.gov (United States)

    Flott, Elizabeth A; Linden, Lois

    2016-03-01

    The aim of this study was to report an analysis of the clinical learning environment concept. Nursing students are evaluated in clinical learning environments where skills and knowledge are applied to patient care. These environments affect achievement of learning outcomes, and have an impact on preparation for practice and student satisfaction with the nursing profession. Providing clarity of this concept for nursing education will assist in identifying antecedents, attributes and consequences affecting student transition to practice. The clinical learning environment was investigated using Walker and Avant's concept analysis method. A literature search was conducted using WorldCat, MEDLINE and CINAHL databases using the keywords clinical learning environment, clinical environment and clinical education. Articles reviewed were written in English and published in peer-reviewed journals between 1995-2014. All data were analysed for recurring themes and terms to determine possible antecedents, attributes and consequences of this concept. The clinical learning environment contains four attribute characteristics affecting student learning experiences. These include: (1) the physical space; (2) psychosocial and interaction factors; (3) the organizational culture and (4) teaching and learning components. These attributes often determine achievement of learning outcomes and student self-confidence. With better understanding of attributes comprising the clinical learning environment, nursing education programmes and healthcare agencies can collaborate to create meaningful clinical experiences and enhance student preparation for the professional nurse role. © 2015 John Wiley & Sons Ltd.

  3. Environment Health & Safety Research Program. Organization and 1979-1980 Publications

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    This document was prepared to assist readers in understanding the organization of Pacific Northwest Laboratory, and the organization and functions of the Environment, Health and Safety Research Program Office. Telephone numbers of the principal management staff are provided. Also included is a list of 1979 and 1980 publications reporting on work performed in the Environment, Health and Safety Research Program, as well as a list of papers submitted for publication.

  4. Health Prevention Program: the cornerstone for a safe work environment

    Energy Technology Data Exchange (ETDEWEB)

    Flores-Andrade, Augusto; Benalcazar, Fernando L. [EnCanEcuador S.A., Quito (Ecuador)

    2004-07-01

    EnCana in Ecuador is deeply committed through the sustainable development by minimizing and controlling hazards, while contributing to the well being of the people and protecting the environment of the communities where we operate, the health and safety of our employees, as well as preventing any loss and ensuring business continuity. To ensure a safe work environment for all our employees and Contractors, the Company has conducted a complete Risk Evaluation, considering: physical, biological, chemical, ergonomics and psychosocial factors. Based on this Map of Risks, the exposure level and the age of the employee, the Medical Department established four different routines of medical exams (pre-occupational and occupational), which are conducted on a regular two years basis, or even in a shorter period of time, if required. Additionally, medical exams are conducted when an employee is transferred to a different position. All employees have their own records, which document their medical shape when enrolled, at any time while working, and when the person leaves the Company. This allows diagramming the history of employees, the following information: X Axis (horizontal) Age of the employee when enrolled, years (chronological) and position when the exams are conducted. Y Axis (vertical) Capability in terms of percentage, of different organs and physiology (audiometric, ears, lungs, etc.). All this information is processed by the EHS Department, which in conjunction with other departments, plan improvement Safety measures to avoid the exposure of the employees to those factors above mentioned, minimizing potential losses and reducing dramatically costs of accidents and absenteeism. Exactly the same concept is being implemented with Contractors, which must also comply with these requirements. Follow-up of all recommendations is conducted on a regular basis by the Employees, Contractors and Management (Executive) EHS Committees. (author)

  5. The physics analysis environment of the ZEUS experiment

    International Nuclear Information System (INIS)

    Bauerdick, L.A.T.; Derugin, O.; Gilkinson, D.; Kasemann, M.; Manczak, O.

    1995-12-01

    The ZEUS Experiment has over the last three years developed its own model of the central computing environment for physics analysis. This model has been designed to provide ZEUS physicists with powerful and user friendly tools for data analysis as well as to be truly scalable and open. (orig.)

  6. SIMS analysis: Development and evaluation program summary

    International Nuclear Information System (INIS)

    Groenewold, G.S.; Appelhans, A.D.; Ingram, J.C.; Delmore, J.E.; Dahl, D.A.

    1996-11-01

    This report provides an overview of the ''SIMS Analysis: Development and Evaluation Program'', which was executed at the Idaho National Engineering Laboratory from mid-FY-92 to the end of FY-96. It should be noted that prior to FY-1994 the name of the program was ''In-Situ SIMS Analysis''. This report will not go into exhaustive detail regarding program accomplishments, because this information is contained in annual reports which are referenced herein. In summary, the program resulted in the design and construction of an ion trap secondary ion mass spectrometer (IT-SIMS), which is capable of the rapid analysis of environmental samples for adsorbed surface contaminants. This instrument achieves efficient secondary ion desorption by use of a molecular, massive ReO 4 - primary ion particle. The instrument manages surface charge buildup using a self-discharging principle, which is compatible with the pulsed nature of the ion trap. The instrument can achieve high selectivity and sensitivity using its selective ion storage and MS/MS capability. The instrument was used for detection of tri-n-butyl phosphate, salt cake (tank cake) characterization, and toxic metal speciation studies (specifically mercury). Technology transfer was also an important component of this program. The approach that was taken toward technology transfer was that of component transfer. This resulted in transfer of data acquisition and instrument control software in FY-94, and ongoing efforts to transfer primary ion gun and detector technology to other manufacturers

  7. Justifying Innovative Language Programs in an Environment of ...

    African Journals Online (AJOL)

    In the analysis of the literature that has been written on project management and language issues in development, it attempts to show how the Communication Skills programme could benefit from this knowledge on project management and educational change management in the third millennium. The paper concludes that ...

  8. Studying creativity training programs: A methodological analysis

    DEFF Research Database (Denmark)

    Valgeirsdóttir, Dagný; Onarheim, Balder

    2017-01-01

    Throughout decades of creativity research, a range of creativity training programs have been developed, tested, and analyzed. In 2004 Scott and colleagues published a meta‐analysis of all creativity training programs to date, and the review presented here sat out to identify and analyze studies...... published since the seminal 2004 review. Focusing on quantitative studies of creativity training programs for adults, our systematic review resulted in 22 publications. All studies were analyzed, but comparing the reported effectiveness of training across studies proved difficult due to methodological...... inconsistencies, variations in reporting of results as well as types of measures used. Thus a consensus for future studies is called for to answer the question: Which elements make one creativity training program more effective than another? This is a question of equal relevance to academia and industry...

  9. Counter Trafficking System Development "Analysis Training Program"

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Dennis C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-12-01

    This document will detail the training curriculum for the Counter-Trafficking System Development (CTSD) Analysis Modules and Lesson Plans are derived from the United States Military, Department of Energy doctrine and Lawrence Livermore National Laboratory (LLNL), Global Security (GS) S Program.

  10. Language-Agnostic Reproducible Data Analysis Using Literate Programming.

    Science.gov (United States)

    Vassilev, Boris; Louhimo, Riku; Ikonen, Elina; Hautaniemi, Sampsa

    2016-01-01

    A modern biomedical research project can easily contain hundreds of analysis steps and lack of reproducibility of the analyses has been recognized as a severe issue. While thorough documentation enables reproducibility, the number of analysis programs used can be so large that in reality reproducibility cannot be easily achieved. Literate programming is an approach to present computer programs to human readers. The code is rearranged to follow the logic of the program, and to explain that logic in a natural language. The code executed by the computer is extracted from the literate source code. As such, literate programming is an ideal formalism for systematizing analysis steps in biomedical research. We have developed the reproducible computing tool Lir (literate, reproducible computing) that allows a tool-agnostic approach to biomedical data analysis. We demonstrate the utility of Lir by applying it to a case study. Our aim was to investigate the role of endosomal trafficking regulators to the progression of breast cancer. In this analysis, a variety of tools were combined to interpret the available data: a relational database, standard command-line tools, and a statistical computing environment. The analysis revealed that the lipid transport related genes LAPTM4B and NDRG1 are coamplified in breast cancer patients, and identified genes potentially cooperating with LAPTM4B in breast cancer progression. Our case study demonstrates that with Lir, an array of tools can be combined in the same data analysis to improve efficiency, reproducibility, and ease of understanding. Lir is an open-source software available at github.com/borisvassilev/lir.

  11. Student Perceptions of Instructional Tools in Programming Logic: A Comparison of Traditional versus Alice Teaching Environments

    Science.gov (United States)

    Schultz, Leah

    2011-01-01

    This research investigates the implementation of the programming language Alice to teach computer programming logic to computer information systems students. Alice has been implemented in other university settings and has been reported to have many benefits including object-oriented concepts and an engaging and fun learning environment. In this…

  12. Media, Tourism, Environment, and Cultural Issues in Australia: A Case Study of a Study Abroad Program

    Science.gov (United States)

    Freedman, Eric

    2010-01-01

    A multidisciplinary study abroad program developed by a U.S. journalism school and cosponsored by a college of agriculture and natural resources interweaves the themes of mass media, tourism, environment, and cultural issues in Australia. This article traces the development and evolution of the faculty-led program and discusses its curriculum,…

  13. 76 FR 34246 - Automated Commercial Environment (ACE); Announcement of National Customs Automation Program Test...

    Science.gov (United States)

    2011-06-13

    ... Environment (ACE); Announcement of National Customs Automation Program Test of Automated Procedures for In... Customs Automation Program (NCAP) test relating to highway movements of commercial goods that are transported in-bond through the United States from one point in Canada to another point in Canada. The NCAP...

  14. Web Environment for Programming and Control of a Mobile Robot in a Remote Laboratory

    Science.gov (United States)

    dos Santos Lopes, Maísa Soares; Gomes, Iago Pacheco; Trindade, Roque M. P.; da Silva, Alzira F.; de C. Lima, Antonio C.

    2017-01-01

    Remote robotics laboratories have been successfully used for engineering education. However, few of them use mobile robots to to teach computer science. This article describes a mobile robot Control and Programming Environment (CPE) and its pedagogical applications. The system comprises a remote laboratory for robotics, an online programming tool,…

  15. The Effects of a Robot Game Environment on Computer Programming Education for Elementary School Students

    Science.gov (United States)

    Shim, Jaekwoun; Kwon, Daiyoung; Lee, Wongyu

    2017-01-01

    In the past, computer programming was perceived as a task only carried out by computer scientists; in the 21st century, however, computer programming is viewed as a critical and necessary skill that everyone should learn. In order to improve teaching of problem-solving abilities in a computing environment, extensive research is being done on…

  16. Supporting secure programming in web applications through interactive static analysis

    Science.gov (United States)

    Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

    2013-01-01

    Many security incidents are caused by software developers’ failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases. PMID:25685513

  17. Supporting secure programming in web applications through interactive static analysis

    Directory of Open Access Journals (Sweden)

    Jun Zhu

    2014-07-01

    Full Text Available Many security incidents are caused by software developers’ failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases.

  18. Supporting secure programming in web applications through interactive static analysis.

    Science.gov (United States)

    Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

    2014-07-01

    Many security incidents are caused by software developers' failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases.

  19. E-Commerce Strategic Business Environment Analysis in Indonesia

    OpenAIRE

    Aribawa, Dwitya

    2016-01-01

    This research is aim to identified important factors in external business environment that tend to influence company capabilities to achieve objective. It conducts to several e-commerce in Indonesia. Those companies operate several industries, such as grocery and household retail, fashion retail, electronic and gadget retail and travel agency booking provider. We conduct thematic analysis with quad helix stakeholders approach. It found that the firm faces several external environment factors ...

  20. The Radiological Safety Analysis Computer Program (RSAC-5) user's manual

    International Nuclear Information System (INIS)

    Wenzel, D.R.

    1994-02-01

    The Radiological Safety Analysis Computer Program (RSAC-5) calculates the consequences of the release of radionuclides to the atmosphere. Using a personal computer, a user can generate a fission product inventory from either reactor operating history or nuclear criticalities. RSAC-5 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated through the inhalation, immersion, ground surface, and ingestion pathways. RSAC+, a menu-driven companion program to RSAC-5, assists users in creating and running RSAC-5 input files. This user's manual contains the mathematical models and operating instructions for RSAC-5 and RSAC+. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-5 and RSAC+. These programs are designed for users who are familiar with radiological dose assessment methods

  1. The USCG/environment Canada/ASTM standards development program

    International Nuclear Information System (INIS)

    Whittaker, H.

    1992-01-01

    Environment Canada's Emergencies Engineering Division (EED) has been charged, as a result of the Public Review Panel on Tanker Safety and Marine Emergency Response report, with increased R ampersand D in marine oil spills. This activity will, of necessity, include development of standards and guidelines for the testing and/or usage of oil spill cleanup equipment. The United States Coast Guard (USCG) has been charged with implementing the provisions of the Oil Pollution Act of 1990 (OPA-90), as it pertains to marine transportation vessels and facilities. Among the provisions are requirements for vessel and facility owners and operators to develop comprehensive response plans that specifically match response resources to spill removal requirements. Meeting the response plan provisions of OPA-90 requires common standards for testing, selecting and assigning resources to anticipated response needs and objectively evaluating response plans for adequacy. In August of 1991, the USCG OPA-90 office approached ASTM to determine the feasibility of developing standards through that organizations procedures. Meetings were then held between the OPA-90 staff and members of the ASTM Committee F-20 on Hazardous Substances and Oil Spill Response. An agreement was reached to commence standards development in the areas of: Barriers, Skimmers, Treating Agents, Pumps, Beach Clean-up, Sorbents, Bioremediation, In-situ Burning, Temporary Storage Devices, Communications, Remote Sensing. It was recognized that ASTM and other organizational standards existed in several of these areas, but there were those where none were known to exist. Standards development was, therefore, expected to be a complicated and time-consuming process. Both the USCG OPA-90 and EC/EED offices required standards to be developed quickly, without subverting the ASTM process. Mechanical containment and recovery was considered to be the primary area of concern for both groups

  2. An overview of environment Canada's National Incinerator Testing and Evaluation Program (NITEP)

    International Nuclear Information System (INIS)

    Finkelstein, A.

    1991-01-01

    In response to the many concerns associated with incineration, Environment Canada established the National Incineration Testing and evaluation Program (NITEP) in 1984. It's mission was to assess the incineration process as a means for disposal of MSW in Canada. The program primarily focused on the environment and health impacts of MSW incinerators by determining how design and operating conditions can be modified to reduce emissions of concern. In addition to developing better measuring and monitoring methods, supporting ash residue management research programs, NITEP established four major field projects to develop the data base necessary for national guidelines. This paper presents a brief overview of the most significant field program findings over the past six years and the rationale for the Canadian Council of Ministers of the Environment (CCME) Operating and Emissions Guidelines for MSW Incinerators published in June of 1989. In addition an overview of the ash work completed to date, and work still underway, will be presented

  3. Static Analysis of Lockless Microcontroller C Programs

    Directory of Open Access Journals (Sweden)

    Eva Beckschulze

    2012-11-01

    Full Text Available Concurrently accessing shared data without locking is usually a subject to race conditions resulting in inconsistent or corrupted data. However, there are programs operating correctly without locking by exploiting the atomicity of certain operations on a specific hardware. In this paper, we describe how to precisely analyze lockless microcontroller C programs with interrupts by taking the hardware architecture into account. We evaluate this technique in an octagon-based value range analysis using access-based localization to increase efficiency.

  4. Analysis of the moral habitability of the nursing work environment.

    Science.gov (United States)

    Peter, Elizabeth H; Macfarlane, Amy V; O'Brien-Pallas, Linda L

    2004-08-01

    Following health reform, nurses have experienced the tremendous stress of heavy workloads, long hours and difficult professional responsibilities. In recognition of these problems, a study was conducted that examined the impact of the working environment on the health of nurses. After conducting focus groups across Canada with nurses and others well acquainted with nursing issues, it became clear that the difficult work environments described had significant ethical implications. The aim of this paper is to report the findings of research that examined the moral habitability of the nursing working environment. A secondary analysis was conducted using the theoretical work of Margaret Urban Walker. Moral practices and responsibilities from Walker's perspective cannot be extricated from other social roles, practices and divisions of labour. Moral-social orders, such as work environments in this research, must be made transparent to examine their moral habitability. Morally habitable environments are those in which differently situated people experience their responsibilities as intelligible and coherent. They also foster recognition, cooperation and shared benefits. Four overarching categories were developed through the analysis of the data: (1) oppressive work environments; (2) incoherent moral understandings; (3) moral suffering and (4) moral influence and resistance. The findings clearly indicate that participants perceived the work environment to be morally uninhabitable. The social and spatial positioning of nurses left them vulnerable to being overburdened by and unsure of their responsibilities. Nevertheless, nurses found meaningful ways to resist and to influence the moral environment. We recommend that nurses develop strong moral identities, make visible the inseparability of their proximity to patients and moral accountability, and further identify what forms of collective action are most effective in improving the moral habitability of their work

  5. Improving delivery of a health-promoting-environments program: experiences from Queensland Health.

    Science.gov (United States)

    Dwyer, S

    1997-01-01

    The purpose of this paper is to outline the key components of a statewide multisite health-promoting-environments program. Contemporary health-promotion programs in settings such as schools, workplaces and hospitals use organisational development theory to address the health issues of the setting, including the physical environment, the organisational environment, and the specific health needs of the employees and consumers of the service. Program principles include management of each project by the participant organisation or site (for example, a school or workplace), using resources available within the organisation and the local community, voluntary participation, social justice and participant-based priority setting, and evaluation and monitoring. Adoption of these principles implies a shift in the role of the health worker from implementer to facilitator. Based on the experience of Queensland Health, it is proposed that the essential building blocks of the health-promoting-environments program are an intersectoral policy base, a model for action, training and resources, local facilitators, support from local organisations, a supportive network of sites, marketing of the program, and a state-based evaluation and monitoring system. The program in Queensland was able to develop a significant number of these components over the 1990-1996 period. In regard to evaluation, process measures can be built around the program components; however, further research is required for development of impact indicators and benchmarks on quality.

  6. Environment of symbolic and graphic programming for the SYMPATI-2 line processor

    International Nuclear Information System (INIS)

    Fernandez, Pascal

    1991-01-01

    This research thesis reports the development of a programming environment which can be easily used at all levels of development of an application in the field of image processing. The author first presents different programming environments by distinguishing, on the one hand, languages or environments which are not specific to a machine, and, on the other hand, languages or environments which are dedicated to a specialised parallel architecture. Then, after a recall of the structure of the line processor from an operational point of view, the author proposes a detailed presentation of the 4LP language, i.e. the layer 0 of the environment. The three other layers are then presented. They respectively comprise a high level symbolic language, a user-friendly and interactive graphic tool, and an interactive graphic tool for the development of applications from programme icons

  7. Analysis of color environment in nuclear power plants

    International Nuclear Information System (INIS)

    Natori, Kazuyuki; Akagi, Ichiro; Souma, Ichiro; Hiraki, Tadao; Sakurai, Yukihiro.

    1996-01-01

    This article reports the results of color and psychological analysis of the outlook of nuclear power plants and the visual environments inside of the plants. Study one was the color measurements of the outlook of nuclear plants and the visual environment inside of the plants. Study two was a survey of the impressions on the visual environments of nuclear plants obtained from observers and interviews of the workers. Through these analysis, we have identified the present state of, and the problems of the color environments of the nuclear plants. In the next step, we have designed the color environments of inside and outside of the nuclear plants which we would recommend (inside designs were about fuel handling room, operation floor of turbine building, observers' pathways, central control room, rest room for the operators). Study three was the survey about impressions on our design inside and outside of the nuclear plants. Nuclear plant observers, residents in Osaka city, residents near the nuclear plants, the operators, employees of subsidiary company and the PR center guides rated their impressions on the designs. Study four was the survey about the design of the rest room for the operators controlling the plants. From the results of four studies, we have proposed some guidelines and problems about the future planning about the visual environments of nuclear power plants. (author)

  8. FEATUREOUS: AN INTEGRATED ENVIRONMENT FOR FEATURE-CENTRIC ANALYSIS AND MODIFICATION OF OBJECT-ORIENTED SOFTWARE

    DEFF Research Database (Denmark)

    Olszak, Andrzej; Jørgensen, Bo Nørregaard

    2011-01-01

    The decentralized nature of collaborations between objects in object-oriented software makes it difficult to understand the implementations of user-observable program features and their respective interdependencies. As feature-centric program understanding and modification are essential during...... software maintenance and evolution, this situation needs to change. In this paper, we present Featureous, an integrated development environment built on top of the NetBeans IDE that facilitates feature-centric analysis of object-oriented software. Our integrated development environment encompasses...... a lightweight feature location mechanism, a number of reusable analytical views, and necessary APIs for supporting future extensions. The base of the integrated development environment is a conceptual framework comprising of three complementary dimensions of comprehension: perspective, abstraction...

  9. Virtual environments for scene of crime reconstruction and analysis

    Science.gov (United States)

    Howard, Toby L. J.; Murta, Alan D.; Gibson, Simon

    2000-02-01

    This paper describes research conducted in collaboration with Greater Manchester Police (UK), to evalute the utility of Virtual Environments for scene of crime analysis, forensic investigation, and law enforcement briefing and training. We present an illustrated case study of the construction of a high-fidelity virtual environment, intended to match a particular real-life crime scene as closely as possible. We describe and evaluate the combination of several approaches including: the use of the Manchester Scene Description Language for constructing complex geometrical models; the application of a radiosity rendering algorithm with several novel features based on human perceptual consideration; texture extraction from forensic photography; and experiments with interactive walkthroughs and large-screen stereoscopic display of the virtual environment implemented using the MAVERIK system. We also discuss the potential applications of Virtual Environment techniques in the Law Enforcement and Forensic communities.

  10. A new methodological development for solving linear bilevel integer programming problems in hybrid fuzzy environment

    Directory of Open Access Journals (Sweden)

    Animesh Biswas

    2016-04-01

    Full Text Available This paper deals with fuzzy goal programming approach to solve fuzzy linear bilevel integer programming problems with fuzzy probabilistic constraints following Pareto distribution and Frechet distribution. In the proposed approach a new chance constrained programming methodology is developed from the view point of managing those probabilistic constraints in a hybrid fuzzy environment. A method of defuzzification of fuzzy numbers using ?-cut has been adopted to reduce the problem into a linear bilevel integer programming problem. The individual optimal value of the objective of each DM is found in isolation to construct the fuzzy membership goals. Finally, fuzzy goal programming approach is used to achieve maximum degree of each of the membership goals by minimizing under deviational variables in the decision making environment. To demonstrate the efficiency of the proposed approach, a numerical example is provided.

  11. Environment, safety, health, and quality plan for the TRU- Contaminated Arid Soils Project of the Landfill Stabilization Focus Area Program

    International Nuclear Information System (INIS)

    Watson, L.R.

    1995-06-01

    The Landfill Stabilization Focus Area (LSFA) is a program funded by the US Department of Energy Office of Technology Development. LSFA supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. The TRU-Contaminated Arid Soils project is being conducted under the auspices of the LSFA Program. This document describes the Environment, Safety, Health, and Quality requirements for conducting LSFA/Arid Soils activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to LSFA/Arid Soils operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and system and performance audits as they apply to the LSFA Program

  12. THE PROPOSED MODEL OF COLLABORATIVE VIRTUAL LEARNING ENVIRONMENT FOR INTRODUCTORY PROGRAMMING COURSE

    Directory of Open Access Journals (Sweden)

    Mahfudzah OTHMAN

    2012-01-01

    Full Text Available This paper discusses the proposed model of the collaborative virtual learning system for the introductory computer programming course which uses one of the collaborative learning techniques known as the “Think-Pair-Share”. The main objective of this study is to design a model for an online learning system that facilitates the collaborative learning activities in a virtual environment such as online communications and pair or small group discussions. In order to model the virtual learning environment, the RUP methodology has been used where it involves the data collection phase and the analysis and design phase. Fifty respondents have been randomly selected to participate in the data collection phase to investigate the students’ interest and learning styles as well as their learning preferences. The results have shown the needs for the development of online small group discussions that can be used as an alternative learning style for programming courses. The proposed design of the virtual learning system named as the Online Collaborative Learning System or OCLS is being depicted using the object-oriented models which are the use-case model and class diagram in order to show the concise processes of virtual “Think-Pair-Share” collaborative activities. The “Think-Pair-Share” collaborative learning technique that is being used in this model has been chosen because of its simplicity and relatively low-risk. This paper also presents the proposed model of the system’s architecture that will become the guidelines for the physical development of OCLS using the web-based applications.

  13. Efficient radiologic reading environment by using an open-source macro program as connection software.

    Science.gov (United States)

    Lee, Young Han

    2012-01-01

    The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  14. Efficient radiologic reading environment by using an open-source macro program as connection software

    International Nuclear Information System (INIS)

    Lee, Young Han

    2012-01-01

    Purpose: The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. Materials and methods: The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. Results: The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. Conclusion: A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software.

  15. GRASP/Ada (Graphical Representations of Algorithms, Structures, and Processes for Ada): The development of a program analysis environment for Ada. Reverse engineering tools for Ada, task 1, phase 2

    Science.gov (United States)

    Cross, James H., II

    1990-01-01

    The study, formulation, and generation of structures for Ada (GRASP/Ada) are discussed in this second phase report of a three phase effort. Various graphical representations that can be extracted or generated from source code are described and categorized with focus on reverse engineering. The overall goal is to provide the foundation for a CASE (computer-aided software design) environment in which reverse engineering and forward engineering (development) are tightly coupled. Emphasis is on a subset of architectural diagrams that can be generated automatically from source code with the control structure diagram (CSD) included for completeness.

  16. Adaptive tools in virtual environments: Independent component analysis for multimedia

    DEFF Research Database (Denmark)

    Kolenda, Thomas

    2002-01-01

    The thesis investigates the role of independent component analysis in the setting of virtual environments, with the purpose of finding properties that reflect human context. A general framework for performing unsupervised classification with ICA is presented in extension to the latent semantic in...... were compared to investigate computational differences and separation results. The ICA properties were finally implemented in a chat room analysis tool and briefly investigated for visualization of search engines results....

  17. Statis Program Analysis for Reliable, Trusted Apps

    Science.gov (United States)

    2017-02-01

    and prevent errors in their Java programs. The Checker Framework includes compiler plug-ins (“checkers”) that find bugs or verify their absence. It...versions of the Java language. 4.8 DATAFLOW FRAMEWORK The dataflow framework enables more accurate analysis of source code. (Despite their similar...names, the dataflow framework is independent of the (Information) Flow Checker of chapter 2.) In Java code, a given operation may be permitted or

  18. Developing a meaningful QA trend analysis program

    International Nuclear Information System (INIS)

    Sternberg, A.

    1987-01-01

    A trend analysis program is being developed by the nuclear quality assurance (NQA) department at Public Service Electric and Gas Company, adapted from the principles advocated by W. Edwards Deming using statistical process control methods. It deals with identifying performance indicators that monitor the activities of a process considering both inputs and outputs, determining whether the process is stable or unstable, taking actions accordingly, and continuing to monitor the process with the objective of continual improvement of quality

  19. [The marine coastal water monitoring program of the Italian Ministry of the Environment].

    Science.gov (United States)

    Di Girolamo, Irene

    2003-01-01

    The Ministry of the Environment carries out marine and coastal monitoring programs with the collaboration of the coastal Regions. The program in progress (2001-2003), on the basis of results of the previous one, has identified 73 particulary significant areas (57 critical areas and 16 control areas). The program investigates several parameters on water, plancton, sediments, mollusks and benthos with analyses fortnightly, six-monthly and annual. The main aim of these three year monitoring programs is to assess the quality of national marine ecosystem.

  20. Neutron activation analysis applied to energy and environment

    International Nuclear Information System (INIS)

    Lyon, W.S.

    1975-01-01

    Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

  1. PROTONEGOCIATIONS - SALES FORECAST AND COMPETITIVE ENVIRONMENT ANALYSIS METHOD

    Directory of Open Access Journals (Sweden)

    Lupu Adrian Gelu

    2009-05-01

    Full Text Available Protonegotiation management, as part of successful negotiations of the organizations, is an issue for analysis extremely important for today’s managers in the confrontations generated by the changes of the environments in the period of transition to marke

  2. Structural Analysis of Kufasat Using Ansys Program

    Science.gov (United States)

    Al-Maliky, Firas T.; AlBermani, Mohamed J.

    2018-03-01

    The current work focuses on vibration and modal analysis of KufaSat structure using ANSYS 16 program. Three types of Aluminum alloys (5052-H32, 6061-T6 and 7075-T6) were selected for investigation of the structure under design loads. Finite element analysis (FEA) in design static load of 51 g was performed. The natural frequencies for five modes were estimated using modal analysis. In order to ensure that KufaSat could withstand with various conditions during launch, the Margin of safety was calculated. The results of deformation and Von Mises stress for linear buckling analysis were also performed. The comparison of data was done to select the optimum material for KufaSat structures.

  3. Debugging Nondeterministic Failures in Linux Programs through Replay Analysis

    Directory of Open Access Journals (Sweden)

    Shakaiba Majeed

    2018-01-01

    Full Text Available Reproducing a failure is the first and most important step in debugging because it enables us to understand the failure and track down its source. However, many programs are susceptible to nondeterministic failures that are hard to reproduce, which makes debugging extremely difficult. We first address the reproducibility problem by proposing an OS-level replay system for a uniprocessor environment that can capture and replay nondeterministic events needed to reproduce a failure in Linux interactive and event-based programs. We then present an analysis method, called replay analysis, based on the proposed record and replay system to diagnose concurrency bugs in such programs. The replay analysis method uses a combination of static analysis, dynamic tracing during replay, and delta debugging to identify failure-inducing memory access patterns that lead to concurrency failure. The experimental results show that the presented record and replay system has low-recording overhead and hence can be safely used in production systems to catch rarely occurring bugs. We also present few concurrency bug case studies from real-world applications to prove the effectiveness of the proposed bug diagnosis framework.

  4. Exploring Environment-Intervention Fit: A Study of a Work Environment Intervention Program for the Care Sector

    Science.gov (United States)

    Aust, Birgit; Flyvholm, Mari-Ann

    2015-01-01

    Targeting occupational health and safety interventions to different groups of employees and sectors is important. The aim of this study was to explore the environment-intervention fit of a Danish psychosocial work environment intervention program for the residential and home care sector. Focus group interviews with employees and interviews with mangers were conducted at 12 selected workplaces and a questionnaire survey was conducted with managers at all 115 workplaces. The interventions enhanced the probability of employees experiencing more “good” work days, where they could make a difference to the lives of clients. The interventions may therefore be characterized as culturally compelling and having a good fit with the immediate work environment of employees. The interventions furthermore seemed to fit well with the wider organizational environment and with recent changes in the societal and economic context of workplaces. However, some workplaces had difficulties with involving all employees and adapting the interventions to the organization of work. The findings suggest that flexibility and a variety of strategies to involve all employees are important aspects, if interventions are to fit well with the care sector. The focus on employees' conceptualization of a “good” work day may be useful for intervention research in other sectors. PMID:26380356

  5. Exploring Environment-Intervention Fit: A Study of a Work Environment Intervention Program for the Care Sector

    Directory of Open Access Journals (Sweden)

    Louise Hardman Smith

    2015-01-01

    Full Text Available Targeting occupational health and safety interventions to different groups of employees and sectors is important. The aim of this study was to explore the environment-intervention fit of a Danish psychosocial work environment intervention program for the residential and home care sector. Focus group interviews with employees and interviews with mangers were conducted at 12 selected workplaces and a questionnaire survey was conducted with managers at all 115 workplaces. The interventions enhanced the probability of employees experiencing more “good” work days, where they could make a difference to the lives of clients. The interventions may therefore be characterized as culturally compelling and having a good fit with the immediate work environment of employees. The interventions furthermore seemed to fit well with the wider organizational environment and with recent changes in the societal and economic context of workplaces. However, some workplaces had difficulties with involving all employees and adapting the interventions to the organization of work. The findings suggest that flexibility and a variety of strategies to involve all employees are important aspects, if interventions are to fit well with the care sector. The focus on employees’ conceptualization of a “good” work day may be useful for intervention research in other sectors.

  6. From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

    Science.gov (United States)

    Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

    1995-02-01

    As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar

  7. Energy analysis program. 1995 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.

    1996-05-01

    This year the role of energy technology research and analysis supporting governmental and public interests is again being challenged at high levels of government. This situation is not unlike that of the early 1980s, when the Administration questioned the relevance of a federal commitment to applied energy research, especially for energy efficiency and renewable energy technologies. Then Congress continued to support such activities, deeming them important to the nation`s interest. Today, Congress itself is challenging many facets of the federal role in energy. The Administration is also selectively reducing its support, primarily for the pragmatic objective of reducing federal expenditures, rather than because of principles opposing a public role in energy. this report is divided into three sections: International Energy and the global environment; Energy, economics, markets, and policy; and Buildings and their environment.

  8. Development and Study the Usage of Blended Learning Environment Model Using Engineering Design Concept Learning Activities to Computer Programming Courses for Undergraduate Students of Rajabhat Universities

    Directory of Open Access Journals (Sweden)

    Kasame Tritrakan

    2017-06-01

    Full Text Available The objectives of this research were to study and Synthesise the components, to develop, and to study the usage of blended learning environment model using engineering design concept learning activities to computer programming courses for undergraduate students of Rajabhat universities. The research methodology was divided into 3 phases. Phase I: surveying presents, needs and problems in teaching computer programming of 52 lecturers by using in-depth interview from 5 experienced lecturers. The model’s elements were evaluated by 5 experts. The tools were questionnaire, interview form, and model’s elements assessment form. Phase II: developing the model of blended learning environment and learning activities based on engineering design processes and confirming model by 8 experts. The tools were the draft of learning environment, courseware, and assessment forms. Phase III evaluating the effects of using the implemented environment. The samples were students which formed into 2 groups, 25 people in the experiment group and 27 people in the control group by cluster random sampling. The tools were learning environment, courseware, and assessment tools. The statistics used in this research were means, standard deviation, t-test dependent, and one-way MANOVA. The results found that: 1 Lecturers quite agreed with the physical, mental, social, and information learning environment, learning processes, and assessments. There were all needs in high level. However there were physical environment problems in high level yet quite low in other aspects. 2 The developed learning environment had 4 components which were a 4 types of environments b the inputs included blended learning environment, learning motivation factors, and computer programming content c the processes were analysis of state objectives, design learning environment and activities, developing learning environment and testing materials, implement, ation evaluation and evaluate, 4 the outputs

  9. Application of decision analysis in debt-for-environment swaps

    Energy Technology Data Exchange (ETDEWEB)

    Abu-Taleb, M.F. [Department of Civil Engineering, Applied Science University, PO Box 40, 11831, Amman (Jordan)

    2003-03-01

    Through a mandate by the Government of Jordan, a debt-for-environment swap initiative was designed to mobilize resources for programs that improve the Jordanian environment within a broad spectrum of conservation, water supply, sanitation, resource management, ecological protection, environmental education, and pollution abatement technology. As a debtor country, Jordan faces a severe debt burden (with debt-per-capita levels among the highest in the world), and is facing difficulty obtaining further credit to fill the gaps in hard currency requirements for imports. Debt swap converts outstanding debt obligations into local currency for approved national environmental programs and projects. With creditor countries favoring debt swap over debt forgiveness in general, and debt swap for environmental technology projects in particular, the initiative was launched to ensure both fiscal and environmental quality benefits. With donors requiring that project development and selection procedures be fair, unbiased, and transparent, a mechanism for ultimate selection was developed by the author solely for the initiative based on multiple objective optimization techniques. This paper formulates the necessary decision-analytic principles for the initiative and presents a discrete, defensible, and transparent model for selection of projects. The model ranks the projects in terms of environment and economic objectives and can be used for other generalized applications. (orig.)

  10. The Analysis of Working Environment in terms of Diversity Management in Corporate Practice.

    OpenAIRE

    Indruchová, Zuzana

    2014-01-01

    Charles University in Prague Faculty of Arts Department of Adult Education Program: Pedagogy Zuzana Krištofová The Analysis of Working Environment in terms of Diversity Management and its Implementation in Corporate Practice Abstract thesis supervisor: Doc. PaedDr. Ludvík Eger, CSc. 2012 ABSTRACT The present doctoral thesis deals with diversity management and clarifies its concepts. The objectives of the thesis include comprehensive characterisation of diversity management as an element of co...

  11. Data analysis in an Object Request Broker environment

    International Nuclear Information System (INIS)

    Malon, D.M.; May, E.N.; Grossman, R.L.; Day, C.T.; Quarrie, D.R.

    1995-01-01

    Computing for the Next Millenium will require software interoperability in heterogeneous, increasingly object-oriented environments. The Common Object Request Broker Architecture (CORBA) is a software industry effort, under the aegis of the Object Management Group (OMG), to standardize mechanisms for software interaction among disparate applications written in a variety of languages and running on a variety of distributed platforms. In this paper, we describe some of the design and performance implications for software that must function in such a brokered environment in a standards-compliant way. We illustrate these implications with a physics data analysis example as a case study

  12. Data analysis in an object request broker environment

    International Nuclear Information System (INIS)

    Malon, David M.; May, Edward N.; Grossman, Robert L.; Day, Christopher T.; Quarrie, David R.

    1996-01-01

    Computing for the Next Millennium will require software interoperability in heterogeneous, increasingly object-oriented environments. The Common Request Broker Architecture (CORBA) is a software industry effort, under the aegis of the Object Management Group (OMG), to standardize mechanism for software interaction among disparate applications written in a variety of languages and running on a variety of distributed platforms. In this paper, we describe some of the design and performance implications for software that must function is such a brokered environment in a standards-compliant way. We illustrate these implications with a physics data analysis example as a case study. (author)

  13. MathModelica - An Extensible Modeling and Simulation Environment with Integrated Graphics and Literate Programming

    OpenAIRE

    Fritzson, Peter; Gunnarsson, Johan; Jirstrand, Mats

    2002-01-01

    MathModelica is an integrated interactive development environment for advanced system modeling and simulation. The environment integrates Modelica-based modeling and simulation with graphic design, advanced scripting facilities, integration of program code, test cases, graphics, documentation, mathematical type setting, and symbolic formula manipulation provided via Mathematica. The user interface consists of a graphical Model Editor and Notebooks. The Model Editor is a graphical user interfa...

  14. Using Activity Theory to Design Constructivist Online Learning Environments for Higher Order Thinking: A Retrospective Analysis

    Directory of Open Access Journals (Sweden)

    Dirk Morrison

    2003-10-01

    Full Text Available Abstract. This paper examined a particular online learning activity, embedded within a computer supported collaborative learning (CSCL environment incorporated as part of the larger context of participation in a unique national agricultural leadership development program. Process outcomes such as a high level of collaboration and active peer facilitation as well as demonstration by participants of a variety of holistic thinking skills were observed via a transcript analysis of online interactions. This led to speculations that the particular design features embedded within the context of the online collaborative issues analysis project (IAP, were thought to clearly reflect a constructivist approach. Methods to confirm this included evaluating the learning activity in light of nine characteristics of an authentic task in CSCL environments, and using activity theory as a conceptual framework with which to further examine the extent to which the IAP reflected the values and principles of a constructivist online learning environment.

  15. Applying the National Industrial Security Program (NISP) in the laboratory environment

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1995-01-01

    With continuing changes in the world safeguards and security environment the effectiveness of many laboratory operations depends on correctly assessing the risk to its programs and developing protection technologies, research and concepts of operations being employed by the scientific community. This paper explores the opportunities afforded by the National Industrial Security Program (NISP) to uniformly and simply protect Laboratory security assets, sensitive and classified information and matter, during all aspects of a laboratory program. The developments in information systems, program security, physical security and access controls suggest an industrial security approach. This paper's overall objective is to indicate that the Laboratory environment is particularly well suited to take advantage being pursued by NISP and the performance objectives of the new DOE orders

  16. The USERDA transport R and D program for environment and safety

    International Nuclear Information System (INIS)

    Sisler, J.A.

    1976-01-01

    This paper describes the U.S. Energy Research and Development Administration's (ERDA) transportation environment and safety research and development program for energy fuels and wastes, including background, current activities, and future plans. It will serve as an overview and integrating factor for the several related technical papers to be presented at this meeting which will enlarge on the detail of specific projects. The transportation R and D program provides for the environmental and safety review of transport systems and procedures; standards development; and package, vehicle, and systems testing for nuclear materials transport. A primary output of the program is the collection, processing, and dissemination of transport environment and safety data, shipment statistics, and technical information. Special transport projects which do not easily fit elsewhere in ERDA are usually done as a part of this program. (author)

  17. Bibliography of the Interagency Energy/Environment R and D Program

    Energy Technology Data Exchange (ETDEWEB)

    Jacoff, F.S. (ed.)

    1979-08-01

    The Interagency Energy/Environment Research and Development Program, which is comprised of more than a dozen federal agencies and departments, is coordinated by the Office of Energy, Minerals and Industry within EPA's Office of Research and Development. The Interagency Program integrates research efforts in two main categories: health and environmental effects of energy systems and development of environmental control technologies. This bibliography lists publications resulting from research and development (R and D) performed under the auspices of the Interagency Program. The publications contained herein range from the Program's most current R and D and date back to the Program's inception in 1975. It has been designed to be used with three companion documents, each of which explores different facets of the Program.

  18. The Design and Pilot Evaluation of an Interactive Learning Environment for Introductory Programming Influenced by Cognitive Load Theory and Constructivism

    Science.gov (United States)

    Moons, Jan; De Backer, Carlos

    2013-01-01

    This article presents the architecture and evaluation of a novel environment for programming education. The design of this programming environment, and the way it is used in class, is based on the findings of constructivist and cognitivist learning paradigms. The environment is evaluated based on qualitative student and teacher evaluations and…

  19. Sediment Analysis Using a Structured Programming Approach

    Directory of Open Access Journals (Sweden)

    Daniela Arias-Madrid

    2012-12-01

    Full Text Available This paper presents an algorithm designed for the analysis of a sedimentary sample of unconsolidated material and seeks to identify very quickly the main features that occur in a sediment and thus classify them fast and efficiently. For this purpose, it requires that the weight of each particle size to be entered in the program and using the method of Moments, which is based on four equations representing the mean, standard deviation, skewness and kurtosis, is found the attributes of the sample in few seconds. With the program these calculations are performed in an effective and more accurately way, obtaining also the explanations of the results of the features such as grain size, sorting, symmetry and origin, which helps to improve the study of sediments and in general the study of sedimentary rocks.

  20. Analysis of the Education Program Approval Process: A Program Evaluation.

    Science.gov (United States)

    Fountaine, Charles A.; And Others

    A study of the education program approval process involving the Veterans Administration (VA) and the State Approving Agencies (SAAs) had the following objectives: to describe the present education program approval process; to determine time and costs associated with the education program approval process; to describe the approval process at…

  1. The NASA/National Space Science Data Center trapped radiation environment model program, 1964 - 1991

    International Nuclear Information System (INIS)

    Vette, J.I.

    1991-11-01

    The major effort that NASA, initially with the help of the United States Air Force (USAF), carried out for 27 years to synthesize the experimental and theoretical results of space research related to energetic charged particles into a quantitative description of the terrestrial trapped radiation environment in the form of model environments is detailed. The effort is called the Trapped Radiation Environment Modeling Program (TREMP). In chapter 2 the historical background leading to the establishment of this program is given. Also, the purpose of this modeling program as established by the founders of the program is discussed. This is followed in chapter 3 by the philosophy and approach that was applied in this program throughout its lifetime. As will be seen, this philosophy led to the continuation of the program long after it would have expired. The highlights of the accomplishments are presented in chapter 4. A view to future possible efforts in this arena is given in chapter 5, mainly to pass on to future workers the differences that are perceived from these many years of experience. Chapter 6 is an appendix that details the chronology of the development of TREMP. Finally, the references, which document the work accomplished over these years, are presented in chapter 7

  2. SPATIAL ANALYSIS TO SUPPORT GEOGRAPHIC TARGETING OF GENOTYPES TO ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    Glenn eHyman

    2013-03-01

    Full Text Available Crop improvement efforts have benefited greatly from advances in available data, computing technology and methods for targeting genotypes to environments. These advances support the analysis of genotype by environment interactions to understand how well a genotype adapts to environmental conditions. This paper reviews the use of spatial analysis to support crop improvement research aimed at matching genotypes to their most appropriate environmental niches. Better data sets are now available on soils, weather and climate, elevation, vegetation, crop distribution and local conditions where genotypes are tested in experimental trial sites. The improved data are now combined with spatial analysis methods to compare environmental conditions across sites, create agro-ecological region maps and assess environment change. Climate, elevation and vegetation data sets are now widely available, supporting analyses that were much more difficult even five or ten years ago. While detailed soil data for many parts of the world remains difficult to acquire for crop improvement studies, new advances in digital soil mapping are likely to improve our capacity. Site analysis and matching and regional targeting methods have advanced in parallel to data and technology improvements. All these developments have increased our capacity to link genotype to phenotype and point to a vast potential to improve crop adaptation efforts.

  3. Environment

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    The term environment refers to the internal and external context in which organizations operate. For some scholars, environment is defined as an arrangement of political, economic, social and cultural factors existing in a given context that have an impact on organizational processes and structures....... For others, environment is a generic term describing a large variety of stakeholders and how these interact and act upon organizations. Organizations and their environment are mutually interdependent and organizational communications are highly affected by the environment. This entry examines the origin...... and development of organization-environment interdependence, the nature of the concept of environment and its relevance for communication scholarships and activities....

  4. The Effects of Visual Cues and Learners' Field Dependence in Multiple External Representations Environment for Novice Program Comprehension

    Science.gov (United States)

    Wei, Liew Tze; Sazilah, Salam

    2012-01-01

    This study investigated the effects of visual cues in multiple external representations (MER) environment on the learning performance of novices' program comprehension. Program codes and flowchart diagrams were used as dual representations in multimedia environment to deliver lessons on C-Programming. 17 field independent participants and 16 field…

  5. Structural analysis of magnetic fusion energy systems in a combined interactive/batch computer environment

    International Nuclear Information System (INIS)

    Johnson, N.E.; Singhal, M.K.; Walls, J.C.; Gray, W.H.

    1979-01-01

    A system of computer programs has been developed to aid in the preparation of input data for and the evaluation of output data from finite element structural analyses of magnetic fusion energy devices. The system utilizes the NASTRAN structural analysis computer program and a special set of interactive pre- and post-processor computer programs, and has been designed for use in an environment wherein a time-share computer system is linked to a batch computer system. In such an environment, the analyst must only enter, review and/or manipulate data through interactive terminals linked to the time-share computer system. The primary pre-processor programs include NASDAT, NASERR and TORMAC. NASDAT and TORMAC are used to generate NASTRAN input data. NASERR performs routine error checks on this data. The NASTRAN program is run on a batch computer system using data generated by NASDAT and TORMAC. The primary post-processing programs include NASCMP and NASPOP. NASCMP is used to compress the data initially stored on magnetic tape by NASTRAN so as to facilitate interactive use of the data. NASPOP reads the data stored by NASCMP and reproduces NASTRAN output for selected grid points, elements and/or data types

  6. The Usability Analysis of An E-Learning Environment

    Directory of Open Access Journals (Sweden)

    Fulya TORUN

    2015-10-01

    Full Text Available In this research, an E-learning environment is developed for the teacher candidates taking the course on Scientific Research Methods. The course contents were adapted to one of the constructivist approach models referred to as 5E, and an expert opinion was received for the compliance of this model. An usability analysis was also performed to determine the usability of the e-learning environment. The participants of the research comprised 42 teacher candidates. The mixed method was used in the research. 3 different data collection tools were used in order to measure the three basic concepts of usability analyses, which are the dimensions of effectiveness, efficiency and satisfaction. Two of the data collection tools were the scales developed by different researchers and were applied with the approval received from the researchers involved. On the other hand, the usability test as another data tool was prepared by the researchers who conducted this study for the purpose of determining the participants’ success in handling the twelve tasks assigned to them with respect to the use of elearning environment, the seconds they spent on that environment and the number of clicks they performed. Considering the results of the analyses performed within the data obtained, the usability of the developed e-learning environment proved to be at a higher rate.

  7. Modular Environment for Graph Research and Analysis with a Persistent

    Energy Technology Data Exchange (ETDEWEB)

    2009-11-18

    The MEGRAPHS software package provides a front-end to graphs and vectors residing on special-purpose computing resources. It allows these data objects to be instantiated, destroyed, and manipulated. A variety of primitives needed for typical graph analyses are provided. An example program illustrating how MEGRAPHS can be used to implement a PageRank computation is included in the distribution.The MEGRAPHS software package is targeted towards developers of graph algorithms. Programmers using MEGRAPHS would write graph analysis programs in terms of high-level graph and vector operations. These computations are transparently executed on the Cray XMT compute nodes.

  8. Interactive Programming and Analysis Aids (IPAA)

    Science.gov (United States)

    1978-06-01

    PAGE 2. GOVT ACCESSION NO.J I JBBIITWj ’"" —— ■ "- INTERACTIVE PROGRAMMING AND ANALYSIS AIDS (IPÄA). 7^ 9. PERFORMING ORGANIZATION ...H fll u u u j o^ o f-« w « » m ^ r>» • ff> o fH CM w * «n >II N ec o^ o »^ ew « isik.f.^iiki>.i«.i^coco<s(Oflos>cocoa> coff >0^ovo«oko^3^a

  9. Analysis of an image quality assurance program

    International Nuclear Information System (INIS)

    Goethlin, J.H.; Alders, B.

    1985-01-01

    Reject film analysis before and after the introduction of a quality assurance program showed a 45% decrease in rejected films. The main changes in equipment and routines were: 1. Increased control of film processors and X-ray generators. 2. New film casettes and screens. 3. Decreased number of film sizes. 4. Information to and supervision of radiographing personnel. Savings in costs and increased income from an increased amount of out-patients corresponded to about 4.5% of the total cost of operating and maintaining the department. (orig.)

  10. Analysis of Virtual Learning Environments from a Comprehensive Semiotic Perspective

    Directory of Open Access Journals (Sweden)

    Gloria María Álvarez Cadavid

    2012-11-01

    Full Text Available Although there is a wide variety of perspectives and models for the study of online education, most of these focus on the analysis of the verbal aspects of such learning, while very few consider the relationship between speech and elements of a different nature, such as images and hypermediality. In a previous article we presented a proposal for a comprehensive semiotic analysis of virtual learning environments that more recently has been developed and tested for the study of different online training courses without instructional intervention. In this paper we use this same proposal to analyze online learning environments in the framework of courses with instructional intervention. One of the main observations in relation to this type of analyses is that the organizational aspects of the courses are found to be related to the way in which the input elements for the teaching and learning process are constructed.

  11. Impact of a process improvement program in a production software environment: Are we any better?

    Science.gov (United States)

    Heller, Gerard H.; Page, Gerald T.

    1990-01-01

    For the past 15 years, Computer Sciences Corporation (CSC) has participated in a process improvement program as a member of the Software Engineering Laboratory (SEL), which is sponsored by GSFC. The benefits CSC has derived from involvement in this program are analyzed. In the environment studied, it shows that improvements were indeed achieved, as evidenced by a decrease in error rates and costs over a period in which both the size and the complexity of the developed systems increased substantially. The principles and mechanics of the process improvement program, the lessons CSC has learned, and how CSC has capitalized on these lessons are also discussed.

  12. Program to assess the effects of extraordinary environments on radioactive material shipping systems

    International Nuclear Information System (INIS)

    Sandoval, R.P.; Reese, R.T.

    1980-01-01

    The highlights of the Transportation System Safety Evaluation (TSSE) Program at Sandia National Laboratories are reviewed and the origins of the program and the relationships to other programs addressing safety concerns are outlined. The areas of current activity in the assessment of possible effects an intentional act or extreme environment could have on nuclear material shipping systems are described. Early information has been obtained on the formation of aerosols, and a significant body of experimentally determined source term data will be available for radiological consequence evaluations

  13. Decision analysis for cleanup strategies in an urban environment

    International Nuclear Information System (INIS)

    Sinkko, K.; Ikaeheimonen, T.K.

    2000-01-01

    The values entering the decisions on protective actions, as concerning the society, are multidimensional. People have strong feelings and beliefs about these values, some of which are not numerically quantified and do not exist in monetary form. The decision analysis is applied in planning the recovery operations to clean up an urban environment in the event of a hypothetical nuclear power plant accident assisting in rendering explicit and apparent all factors involved and evaluating their relative importance. (author)

  14. Run-Time and Compiler Support for Programming in Adaptive Parallel Environments

    Directory of Open Access Journals (Sweden)

    Guy Edjlali

    1997-01-01

    Full Text Available For better utilization of computing resources, it is important to consider parallel programming environments in which the number of available processors varies at run-time. In this article, we discuss run-time support for data-parallel programming in such an adaptive environment. Executing programs in an adaptive environment requires redistributing data when the number of processors changes, and also requires determining new loop bounds and communication patterns for the new set of processors. We have developed a run-time library to provide this support. We discuss how the run-time library can be used by compilers of high-performance Fortran (HPF-like languages to generate code for an adaptive environment. We present performance results for a Navier-Stokes solver and a multigrid template run on a network of workstations and an IBM SP-2. Our experiments show that if the number of processors is not varied frequently, the cost of data redistribution is not significant compared to the time required for the actual computation. Overall, our work establishes the feasibility of compiling HPF for a network of nondedicated workstations, which are likely to be an important resource for parallel programming in the future.

  15. Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution (PPBE) System in Georgia

    Science.gov (United States)

    2004-06-01

    Roy J. What Determines Economic Growth? Economic Review – Second Quarter 1993 [References: Barro (1991); Mankiw , Romer, and Well (1992); De Long...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release: distribution unlimited ECONOMIC SECURITY...DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE: Economic Security Environment and Implementation of Planning, Programming, Budgeting, Execution

  16. The Use of Engineering Design Concept for Computer Programming Course: A Model of Blended Learning Environment

    Science.gov (United States)

    Tritrakan, Kasame; Kidrakarn, Pachoen; Asanok, Manit

    2016-01-01

    The aim of this research is to develop a learning model which blends factors from learning environment and engineering design concept for learning in computer programming course. The usage of the model was also analyzed. This study presents the design, implementation, and evaluation of the model. The research methodology is divided into three…

  17. Notification: Preliminary Research on EPA's Design for the Environment Product Labeling Program OIG

    Science.gov (United States)

    Project #OPE-FY14-4012, November 06, 2013. The Office of Inspector General (OIG) is starting preliminary research on the U.S. Environmental Protection Agency’s (EPA’s) Design for the Environment (DfE) Product Labeling Program.

  18. Exploring the Lived Experiences of Program Managers Regarding an Automated Logistics Environment

    Science.gov (United States)

    Allen, Ronald Timothy

    2014-01-01

    Automated Logistics Environment (ALE) is a new term used by Navy and aerospace industry executives to describe the aggregate of logistics-related information systems that support modern aircraft weapon systems. The development of logistics information systems is not always well coordinated among programs, often resulting in solutions that cannot…

  19. Enriched Home Environment Program for Preschool Children with Autism Spectrum Disorders

    Science.gov (United States)

    Sood, Divya; Szymanski, Monika; Schranz, Caren

    2015-01-01

    This study discusses the impact of the Enriched Home Environment Program (EHEP) on participation in home activities among two children with ASD using case study methodology. EHEP involves occupational therapists to collaborate with families of children with ASD to educate them about the impact of factors that influence child's participation within…

  20. Assessment of the impacts of the French nuclear program on the environment

    International Nuclear Information System (INIS)

    Naudet, G.

    1994-01-01

    This paper is an assessment of the impact of the French nuclear program on investments, on electricity price, on electricity and energy demand and especially on environment. The impact on atmosphere pollution which is based on a macro economic long term model (called MELODY), particularly detailed for the energy sector, is outlined. (TEC). 10 figs., 1 tab., 4 refs

  1. Testing Algorithmic Skills in Traditional and Non-Traditional Programming Environments

    Science.gov (United States)

    Csernoch, Mária; Biró, Piroska; Máth, János; Abari, Kálmán

    2015-01-01

    The Testing Algorithmic and Application Skills (TAaAS) project was launched in the 2011/2012 academic year to test first year students of Informatics, focusing on their algorithmic skills in traditional and non-traditional programming environments, and on the transference of their knowledge of Informatics from secondary to tertiary education. The…

  2. Interviews with College Students: Evaluating Computer Programming Environments for Introductory Courses

    Science.gov (United States)

    Uysal, Murat Pasa

    2014-01-01

    Different methods, strategies, or tools have been proposed for teaching Object Oriented Programming (OOP). However, it is still difficult to introduce OOP to novice learners. The problem may be not only adopting a method or language, but also use of an appropriate integrated development environment (IDE). Therefore, the focus should be on the…

  3. EXPLORATORY ANALYSIS OF ORGANIZATIONAL CULTURE IN GALATI COUNTY BUSINESS ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Gabriela GHEORGHE

    2014-06-01

    Full Text Available Based on data collected as part of the COMOR Project, developed by The Scientific Society of Management from Romania, for the analysis of organizational culture in the Romanian business environment, we have initiated an exploration using Business Intelligence tools. The purpose of this analysis is to find relevant information about the organizational culture for Galati County, starting from the results obtained in this project, and, using data mining techniques, to investigate relationships and links between responses to different survey questions, in this "mine" data, gathered by the project team effort.

  4. Small-grants programs: lessons from community-based approaches to changing nutrition environments.

    Science.gov (United States)

    Johnson, Donna B; Smith, Lynne T; Bruemmer, Barbara

    2007-02-01

    Providing small grants to community organizations can be an effective way to encourage changes in the environment that support better nutrition. This is effective because these organizations can provide insights into their communities, ready-made relationships with community members, and the trust of the community. Small-grants programs are more likely to be successful when they are tailored to the needs of individual communities, led by organizations that have established reputations with the community, fully supported by the lead community organization, and engage local partners that complement the skills and resources of the lead organization. An evaluation of a small-grants program, Grants for Healthy Youth, found that grantees developed unique approaches to improving their community nutrition environments, gained experience and skills in program development, built partnerships, and received recognition for their project work. Grantees faced some common barriers, especially with program evaluation. Small-grants programs can be an effective way to improve community nutrition environments, but granting agencies need to provide effective technical assistance to communities throughout the process.

  5. Geospatial analysis of food environment demonstrates associations with gestational diabetes.

    Science.gov (United States)

    Kahr, Maike K; Suter, Melissa A; Ballas, Jerasimos; Ramin, Susan M; Monga, Manju; Lee, Wesley; Hu, Min; Shope, Cindy D; Chesnokova, Arina; Krannich, Laura; Griffin, Emily N; Mastrobattista, Joan; Dildy, Gary A; Strehlow, Stacy L; Ramphul, Ryan; Hamilton, Winifred J; Aagaard, Kjersti M

    2016-01-01

    Gestational diabetes mellitus (GDM) is one of most common complications of pregnancy, with incidence rates varying by maternal age, race/ethnicity, obesity, parity, and family history. Given its increasing prevalence in recent decades, covariant environmental and sociodemographic factors may be additional determinants of GDM occurrence. We hypothesized that environmental risk factors, in particular measures of the food environment, may be a diabetes contributor. We employed geospatial modeling in a populous US county to characterize the association of the relative availability of fast food restaurants and supermarkets to GDM. Utilizing a perinatal database with >4900 encoded antenatal and outcome variables inclusive of ZIP code data, 8912 consecutive pregnancies were analyzed for correlations between GDM and food environment based on countywide food permit registration data. Linkage between pregnancies and food environment was achieved on the basis of validated 5-digit ZIP code data. The prevalence of supermarkets and fast food restaurants per 100,000 inhabitants for each ZIP code were gathered from publicly available food permit sources. To independently authenticate our findings with objective data, we measured hemoglobin A1c levels as a function of geospatial distribution of food environment in a matched subset (n = 80). Residence in neighborhoods with a high prevalence of fast food restaurants (fourth quartile) was significantly associated with an increased risk of developing GDM (relative to first quartile: adjusted odds ratio, 1.63; 95% confidence interval, 1.21-2.19). In multivariate analysis, this association held true after controlling for potential confounders (P = .002). Measurement of hemoglobin A1c levels in a matched subset were significantly increased in association with residence in a ZIP code with a higher fast food/supermarket ratio (n = 80, r = 0.251 P analysis, a relationship of food environment and risk for gestational diabetes was

  6. Enhancement of the Work in Scia Engineer's Environment by Employment of XML Programming Language

    Directory of Open Access Journals (Sweden)

    Kortiš Ján

    2015-12-01

    Full Text Available The productivity of the work of engineers in the design of building structures by applying the rules of technical standards [1] has been increasing by using different software products for recent years. The software products offer engineers new possibilities to design different structures. However, there are problems especially for design of structures with similar static schemes as it is needed to follow the same work-steps. This can be more effective if the steps are done automatically by using a programming language for leading the processes that are done by software. The design process of timber structure which is done in the environment of Scia Engineer software is presented in the article. XML Programming Language is used for automatization of the design and the XML code is modified in the Excel environment by using VBA Programming language [2], [3].

  7. Autonomy support environment and autonomous motivation on nursing student academic performance: An exploratory analysis.

    Science.gov (United States)

    Bronson, Sevilla

    2016-09-01

    In the U.S., enrollment and graduation rates of baccalaureate nursing programs are slowly increasing. Rigorous program requirements can be overwhelming for students who may have difficulty adjusting to curriculum demands. Faculty who help students to adjust may also build a supportive learning environment that promotes autonomous motivation, improves engagement, and strengthens academic performance. Students may also experience well-being and autonomy when they feel supported and when their needs are met. The aim of this study was to investigate nursing students' autonomy support environments and autonomous motivation (measured as spirituality), and the influence on engagement and academic performance. A cross-sectional correlational design using a convenience sample of 150 nursing students in the last year of a baccalaureate nursing program was used. Participants were recruited from four universities in Florida and data collection occurred over three months. All participants were enrolled in the last year of their baccalaureate nursing program with an average Grade Point Average (GPA) of 3.36. The learning climate alone was moderately supportive of student motivation (M=70.60, SD=18.99). No significant relationship between the autonomy support environment and autonomous motivation (r=.034, p=.676) was found. Correlations and regression analysis of autonomous motivation and work engagement were significant (F (2, 147)=28.28, p=.000). Comparison of participant groups from each university independently revealed supportive learning environments. Strategies to promote autonomy must be developed and implemented as a means of ensuring a favorable learning environment. Future research may include the investigation of spirituality and autonomous motivation as two separate variables. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. SPICE Module for the Satellite Orbit Analysis Program (SOAP)

    Science.gov (United States)

    Coggi, John; Carnright, Robert; Hildebrand, Claude

    2008-01-01

    A SPICE module for the Satellite Orbit Analysis Program (SOAP) precisely represents complex motion and maneuvers in an interactive, 3D animated environment with support for user-defined quantitative outputs. (SPICE stands for Spacecraft, Planet, Instrument, Camera-matrix, and Events). This module enables the SOAP software to exploit NASA mission ephemeris represented in the JPL Ancillary Information Facility (NAIF) SPICE formats. Ephemeris types supported include position, velocity, and orientation for spacecraft and planetary bodies including the Sun, planets, natural satellites, comets, and asteroids. Entire missions can now be imported into SOAP for 3D visualization, playback, and analysis. The SOAP analysis and display features can now leverage detailed mission files to offer the analyst both a numerically correct and aesthetically pleasing combination of results that can be varied to study many hypothetical scenarios. The software provides a modeling and simulation environment that can encompass a broad variety of problems using orbital prediction. For example, ground coverage analysis, communications analysis, power and thermal analysis, and 3D visualization that provide the user with insight into complex geometric relations are included. The SOAP SPICE module allows distributed science and engineering teams to share common mission models of known pedigree, which greatly reduces duplication of effort and the potential for error. The use of the software spans all phases of the space system lifecycle, from the study of future concepts to operations and anomaly analysis. It allows SOAP software to correctly position and orient all of the principal bodies of the Solar System within a single simulation session along with multiple spacecraft trajectories and the orientation of mission payloads. In addition to the 3D visualization, the user can define numeric variables and x-y plots to quantitatively assess metrics of interest.

  9. Gerald: a general environment for radiation analysis and design

    International Nuclear Information System (INIS)

    Boyle, Ch.; Oliveira, P.I.E. de; Oliveira, C.R.E. de; Adams, M.L.; Galan, J.M.

    2005-01-01

    Full text of publication follows: This paper describes the status of the GERALD interactive workbench for the analysis of radiation transport problems. GERALD basically guides the user through the various steps that are necessary to solve a radiation transport problem, and is aimed at education, research and industry. The advantages of such workbench are many: quality assurance of problem setup, interaction of the user with problem solution, preservation of theory and legacy research codes, and rapid proto-typing and testing of new methods. The environment is of general applicability catering for analytical, deterministic and stochastic analysis of the radiation problem and is not tied to one specific solution method or code. However, GERALD is being developed as a portable, modular, open source framework which renders itself quite naturally to the coupling of existing computational tools through specifically developed plug-ins. By offering a common route for setting up, solving and analyzing radiation transport problems GERALD offers the possibility of methods intercomparison and validation. Such flexible radiation transport environment will also facilitate the coupling of radiation physics methods to other physical phenomena and their application to other areas of application such as medical physics and the environment. (authors)

  10. Coupling R and PHREEQC: an interactive and extensible environment for efficient programming of geochemical models

    Science.gov (United States)

    De Lucia, Marco; Kühn, Michael

    2013-04-01

    PHREEQC [1] is a widely used non-interactive open source software for speciation, batch-reactions, one-dimensional transport, and inverse geochemical caclulations. It represents the tool of choice for many researchers and practicioners for a broad set of geochemical problems, underground CO2 storage among others. Its open source nature, the flexibility to program arbitrary kinetic laws for the chemical reactions, as well as a thorough implementation of the Pitzer formalism explain its success and longevity. However, its non-interactive architecture make it cumbersome to couple PHREEQC to transport programs to achieve reactive transport simulations [2], but also to overcome the limitations of PHREEQC itself regarding the setup of large numbers of simulations - for example exploring wide ranges of conditions - and the graphical evaluation of the results. This has been the main motivation leading to the development of an interface with the high level language and environment for statistical computing and graphics GNU R [3]. The interface consists of minor modifications in PHREEQC's C source code, only affecting data I/O, plus on the R side a bunch of helper functions used to setup the simulations - basically automated manipulation of PHREEQC's input files, which are text files - and to collect and visualize the results. The most relevant subset of PHREEQC's capabilities and features are fully usable through the interface. Illustratory examples for the utility of this programmable interface were given in the framework of the research project this developement originated from: CLEAN [4], a project investigating the feasibility of enhanced gas recovery combined with CO2 storage. This interface allowed us to successfully and easily manipulate, compare and refit chemical databases, perform sensitivity analysis by combinatory variations of parameters, and all that in an environment which is both scriptable and interactive, with all results directly available for further

  11. Utility green pricing programs: a statistical analysis of program effectiveness

    International Nuclear Information System (INIS)

    Ryan, W.; Scott, O.; Lori, B.; Blair, S.

    2005-01-01

    Utility green pricing programs represent one way in which consumers can voluntarily support the development of renewable energy. The design features and effectiveness of these programs varies considerably. Based on a survey of utility program managers in the United States, this article provides insight into which program features might help maximize both customer participation in green pricing programs and the amount of renewable energy purchased by customers in those programs. We find that program length has a substantial impact on customer participation and purchases; to achieve higher levels of success, utilities will need to remain committed to their product offering for some time. Our findings also suggest that utilities should consider higher renewable energy purchase thresholds for residential customers in order to maximize renewable energy sales. Smaller utilities are found to be more successful than larger utilities, and we find some evidence that providing private benefits to nonresidential participants can enhance success. Interestingly, we find little evidence that the cost of the green pricing product greatly impacts customer participation and renewable energy sales, at least over the narrow range of premiums embedded in our data set, and for the initial set of green power purchasers. (author)

  12. Recommendations for Guidelines for Environment-Specific Magnetic-Field Measurements, Rapid Program Engineering Project #2

    Energy Technology Data Exchange (ETDEWEB)

    Electric Research and Management, Inc.; IIT Research Institute; Magnetic Measurements; Survey Research Center, University of California; T. Dan Bracken, Inc.

    1997-03-11

    The purpose of this project was to document widely applicable methods for characterizing the magnetic fields in a given environment, recognizing the many sources co-existing within that space. The guidelines are designed to allow the reader to follow an efficient process to (1) plan the goals and requirements of a magnetic-field study, (2) develop a study structure and protocol, and (3) document and carry out the plan. These guidelines take the reader first through the process of developing a basic study strategy, then through planning and performing the data collection. Last, the critical factors of data management, analysis reporting, and quality assurance are discussed. The guidelines are structured to allow the researcher to develop a protocol that responds to specific site and project needs. The Research and Public Information Dissemination Program (RAPID) is based on exposure to magnetic fields and the potential health effects. Therefore, the most important focus for these magnetic-field measurement guidelines is relevance to exposure. The assumed objective of an environment-specific measurement is to characterize the environment (given a set of occupants and magnetic-field sources) so that information about the exposure of the occupants may be inferred. Ideally, the researcher seeks to obtain complete or "perfect" information about these magnetic fields, so that personal exposure might also be modeled perfectly. However, complete data collection is not feasible. In fact, it has been made more difficult as the research field has moved to expand the list of field parameters measured, increasing the cost and complexity of performing a measurement and analyzing the data. The guidelines address this issue by guiding the user to design a measurement protocol that will gather the most exposure-relevant information based on the locations of people in relation to the sources. We suggest that the "microenvironment" become the base unit of area in a study, with

  13. The Future of the Global Environment: A Model-based Analysis Supporting UNEP's First Global Environment Outlook

    NARCIS (Netherlands)

    Bakkes JA; Woerden JW van; Alcamo J; Berk MM; Bol P; Born GJ van den; Brink BJE ten; Hettelingh JP; Langeweg F; Niessen LW; Swart RJ; United Nations Environment; MNV

    1997-01-01

    This report documents the scenario analysis in UNEP's first Global Environment Outlook, published at the same time as the scenario analysis. This Outlook provides a pilot assessment of developments in the environment, both global and regional, between now and 2015, with a further projection to

  14. The Appropriateness of Scratch and App Inventor as Educational Environments for Teaching Introductory Programming in Primary and Secondary Education

    Science.gov (United States)

    Papadakis, Stamatios; Kalogiannakis, Michail; Orfanakis, Vasileios; Zaranis, Nicholas

    2017-01-01

    Teaching programming is a complex task. The task is even more challenging for introductory modules. There is an ongoing debate in the teaching community over the best approach to teaching introductory programming. Visual block-based programming environments allow school students to create their own programs in ways that are more accessible than in…

  15. SimpleITK Image-Analysis Notebooks: a Collaborative Environment for Education and Reproducible Research.

    Science.gov (United States)

    Yaniv, Ziv; Lowekamp, Bradley C; Johnson, Hans J; Beare, Richard

    2018-06-01

    Modern scientific endeavors increasingly require team collaborations to construct and interpret complex computational workflows. This work describes an image-analysis environment that supports the use of computational tools that facilitate reproducible research and support scientists with varying levels of software development skills. The Jupyter notebook web application is the basis of an environment that enables flexible, well-documented, and reproducible workflows via literate programming. Image-analysis software development is made accessible to scientists with varying levels of programming experience via the use of the SimpleITK toolkit, a simplified interface to the Insight Segmentation and Registration Toolkit. Additional features of the development environment include user friendly data sharing using online data repositories and a testing framework that facilitates code maintenance. SimpleITK provides a large number of examples illustrating educational and research-oriented image analysis workflows for free download from GitHub under an Apache 2.0 license: github.com/InsightSoftwareConsortium/SimpleITK-Notebooks .

  16. A Systematic Approach for Engagement Analysis Under Multitasking Environments

    Science.gov (United States)

    Zhang, Guangfan; Leddo, John; Xu, Roger; Richey, Carl; Schnell, Tom; McKenzie, Frederick; Li, Jiang

    2011-01-01

    An overload condition can lead to high stress for an operator and further cause substantial drops in performance. On the other extreme, in automated systems, an operator may become underloaded; in which case, it is difficult for the operator to maintain sustained attention. When an unexpected event occurs, either internal or external to the automated system, a disengaged operation may neglect, misunderstand, or respond slowly/inappropriately to the situation. In this paper, we discuss a systematic approach monitor for extremes of cognitive workload and engagement in multitasking environments. Inferences of cognitive workload ar engagement are based on subjective evaluations, objective performance measures, physiological signals, and task analysis results. The systematic approach developed In this paper aggregates these types of information collected under the multitasking environment and can provide a real-time assessment or engagement.

  17. Analysis on Space Environment from the Anomalies of Geosynchronous Satellites

    Directory of Open Access Journals (Sweden)

    Jaejin Lee

    2009-12-01

    Full Text Available While it is well known that space environment can produce spacecraft anomaly, defining space environment effects for each anomalies is difficult. This is caused by the fact that spacecraft anomaly shows various symptoms and reproducing it is impossible. In this study, we try to find the conditions of when spacecraft failures happen more frequently and give satellite operators useful information. Especially, our study focuses on the geosynchronous satellites which cost is high and required high reliability. We used satellite anomaly data given by Satellite News Digest which is internet newspaper providing space industry news. In our analysis, 88 anomaly cases occurred from 1997 to 2008 shows bad corelation with Kp index. Satellite malfunctions were likely to happen in spring and fall and in local time from midnight to dawn. In addition, we found the probability of anomaly increase when high energy electron flux is high. This is more clearly appeared in solar minimum than maximum period.

  18. Rehabilitation Program Integrating Virtual Environment to Improve Orientation and Mobility Skills for People Who Are Blind.

    Science.gov (United States)

    Lahav, Orly; Schloerb, David W; Srinivasan, Mandayam A

    2015-01-01

    This paper presents the integration of a virtual environment (BlindAid) in an orientation and mobility rehabilitation program as a training aid for people who are blind. BlindAid allows the users to interact with different virtual structures and objects through auditory and haptic feedback. This research explores if and how use of the BlindAid in conjunction with a rehabilitation program can help people who are blind train themselves in familiar and unfamiliar spaces. The study, focused on nine participants who were congenitally, adventitiously, and newly blind, during their orientation and mobility rehabilitation program at the Carroll Center for the Blind (Newton, Massachusetts, USA). The research was implemented using virtual environment (VE) exploration tasks and orientation tasks in virtual environments and real spaces. The methodology encompassed both qualitative and quantitative methods, including interviews, a questionnaire, videotape recording, and user computer logs. The results demonstrated that the BlindAid training gave participants additional time to explore the virtual environment systematically. Secondly, it helped elucidate several issues concerning the potential strengths of the BlindAid system as a training aid for orientation and mobility for both adults and teenagers who are congenitally, adventitiously, and newly blind.

  19. Activation analysis in the environment: Science and technology

    International Nuclear Information System (INIS)

    Lenihan, J.

    1989-01-01

    Science is disciplined curiosity. Activation analysis was created more than 50 yr ago by Hevesy's curiosity and Levi's experimental skill. Technology is the exploitation of machines and materials for the fulfillment of human needs or wants. The early history of neutron activation analysis (NAA) was greatly influenced by military requirements. Since then the technique has found applications in many disciplines, including materials science, medicine, archaeology, geochemistry, agriculture, and forensic science. More recently, neutron activation analysts, responding to increasing public interest and concern, have made distinctive contributions to the study of environmental problems. Activation analysis, though it uses some procedures derived from physics, is essentially a chemical technique. The chemical study of the environment may be reviewed under many headings; three are discussed here: 1. occupational medicine 2. health of the general public 3. environmental pollution

  20. AMMI model in the analysis of genotype by environment interaction of conventionally and organically grown onion

    Directory of Open Access Journals (Sweden)

    Brdar-Jokanović Milka

    2016-01-01

    Full Text Available This study was aimed to assess the stability of direct yield components (bulb weight and number plot-1 and other yield contributing characteristics (bulb diameter, height and index, neck diameter and length, plant height, emergence and vegetation period in five commercial onion cultivars grown in conventional and organic environments, by employing additive main effect and multiplicative interaction (AMMI statistical model in data analysis. The two-year field trial organized in complete randomized blocks included the plots maintained in four regimes: mineral fertilization (conventional, without fertilization, fertilization with farmyard manure and with bacterial fertilizer (organic. Each treatment by year combination was considered as an environment. Analysis of variance of AMMI model calculated for the investigated traits showed that all sources of variation (genotypes, environments, genotype by environment interaction were highly significant. The largest proportions of the total sum of squares were encompassed by environments, except for emergence and bulb index with the pronounced effect of genotypes (67.26 and 52.54%, respectively and neck length with the genotype by environment interaction amounting 44.59%. Generally, the effects of the interactions were in the common range. The AMMI model with two axes was concluded as the best model for the investigated traits. Onions grown in conventional system outperformed the organic ones. However, good performance of the genotypes was accompanied with low stability across the environments and vice versa. Therefore breeding programs intended to develop cultivars adapted to alternative production systems should rely on the experiments set in the corresponding environments that include various combinations of genotypes and agro-technical procedures based on the principles of organic agriculture. [Projekat Ministarstva nauke Republike Srbije, br. TR 31059

  1. Mechanical properties test program on structural materials in a sodium environment

    International Nuclear Information System (INIS)

    Natesan, K.; Chopra, O.K.; Kassner, T.F.

    1979-10-01

    This document describes in detail the ongoing and planned US Test program on the mechanical properties of sodium-exposed Type 316 austenitic stainless and Fe-2 1/4 Cr-1 Mo ferritic steels. The test program is based on the Development Requirement Specifications (DRS) established by the DOE/Clinch River Breeder Reactor Project (CRBRP) Program Office, the general need for the development of LMFBR structural-design criteria established by the Nuclear Systems Materials Handbook, and the need for a fundamental understanding of materials behavior in a sodium environment, which is generic to LMFBR systems. The planned test program is an extension of work based on current knowledge of sodium chemistry and the influence of sodium purity on the mechanical properties of structural materials

  2. Food and beverage environment analysis and monitoring system: a reliability study in the school food and beverage environment.

    Science.gov (United States)

    Bullock, Sally Lawrence; Craypo, Lisa; Clark, Sarah E; Barry, Jason; Samuels, Sarah E

    2010-07-01

    States and school districts around the country are developing policies that set nutrition standards for competitive foods and beverages sold outside of the US Department of Agriculture's reimbursable school lunch program. However, few tools exist for monitoring the implementation of these new policies. The objective of this research was to develop a computerized assessment tool, the Food and Beverage Environment Analysis and Monitoring System (FoodBEAMS), to collect data on the competitive school food environment and to test the inter-rater reliability of the tool among research and nonresearch professionals. FoodBEAMS was used to collect data in spring 2007 on the competitive foods and beverages sold in 21 California high schools. Adherence of the foods and beverages to California's competitive food and beverage nutrition policies for schools (Senate Bills 12 and 965) was determined using the data collected by both research and nonresearch professionals. The inter-rater reliability between the data collectors was assessed using the intraclass correlation coefficient. Researcher vs researcher and researcher vs nonresearcher inter-rater reliability was high for both foods and beverages, with intraclass correlation coefficients ranging from .972 to .987. Results of this study provide evidence that FoodBEAMS is a promising tool for assessing and monitoring adherence to nutrition standards for competitive foods sold on school campuses and can be used reliably by both research and nonresearch professionals. Copyright 2010 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

  3. Metagenomic analysis of the airborne environment in urban spaces.

    Science.gov (United States)

    Be, Nicholas A; Thissen, James B; Fofanov, Viacheslav Y; Allen, Jonathan E; Rojas, Mark; Golovko, George; Fofanov, Yuriy; Koshinsky, Heather; Jaing, Crystal J

    2015-02-01

    The organisms in aerosol microenvironments, especially densely populated urban areas, are relevant to maintenance of public health and detection of potential epidemic or biothreat agents. To examine aerosolized microorganisms in this environment, we performed sequencing on the material from an urban aerosol surveillance program. Whole metagenome sequencing was applied to DNA extracted from air filters obtained during periods from each of the four seasons. The composition of bacteria, plants, fungi, invertebrates, and viruses demonstrated distinct temporal shifts. Bacillus thuringiensis serovar kurstaki was detected in samples known to be exposed to aerosolized spores, illustrating the potential utility of this approach for identification of intentionally introduced microbial agents. Together, these data demonstrate the temporally dependent metagenomic complexity of urban aerosols and the potential of genomic analytical techniques for biosurveillance and monitoring of threats to public health.

  4. Computer programs simplify optical system analysis

    Science.gov (United States)

    1965-01-01

    The optical ray-trace computer program performs geometrical ray tracing. The energy-trace program calculates the relative monochromatic flux density on a specific target area. This program uses the ray-trace program as a subroutine to generate a representation of the optical system.

  5. ENERGY EFFICIENT BUILDINGS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

    Energy Technology Data Exchange (ETDEWEB)

    Authors, Various

    1979-12-01

    The research reported in this volume was undertaken during FY 1979 within the Energy & Environment Division of the Lawrence Berkeley Laboratory. This volume will comprise a section of the Energy & Environment Division 1979 Annual Report, to be published in the summer of 1980. Work reported relate to: thermal performance of building envelopes; building ventilation and indoor air quality; a computer program for predicting energy use in buildings; study focused specifically on inherently energy intensive hospital buildings; energy efficient windows and lighting; potential for energy conservation and savings in the buildings sector; and evaluation of energy performance standards for residential buildings.

  6. Analyzing coastal environments by means of functional data analysis

    Science.gov (United States)

    Sierra, Carlos; Flor-Blanco, Germán; Ordoñez, Celestino; Flor, Germán; Gallego, José R.

    2017-07-01

    Here we used Functional Data Analysis (FDA) to examine particle-size distributions (PSDs) in a beach/shallow marine sedimentary environment in Gijón Bay (NW Spain). The work involved both Functional Principal Components Analysis (FPCA) and Functional Cluster Analysis (FCA). The grainsize of the sand samples was characterized by means of laser dispersion spectroscopy. Within this framework, FPCA was used as a dimension reduction technique to explore and uncover patterns in grain-size frequency curves. This procedure proved useful to describe variability in the structure of the data set. Moreover, an alternative approach, FCA, was applied to identify clusters and to interpret their spatial distribution. Results obtained with this latter technique were compared with those obtained by means of two vector approaches that combine PCA with CA (Cluster Analysis). The first method, the point density function (PDF), was employed after adapting a log-normal distribution to each PSD and resuming each of the density functions by its mean, sorting, skewness and kurtosis. The second applied a centered-log-ratio (clr) to the original data. PCA was then applied to the transformed data, and finally CA to the retained principal component scores. The study revealed functional data analysis, specifically FPCA and FCA, as a suitable alternative with considerable advantages over traditional vector analysis techniques in sedimentary geology studies.

  7. Strengthening the weak link: Built Environment modelling for loss analysis

    Science.gov (United States)

    Millinship, I.

    2012-04-01

    Methods to analyse insured losses from a range of natural perils, including pricing by primary insurers and catastrophe modelling by reinsurers, typically lack sufficient exposure information. Understanding the hazard intensity in terms of spatial severity and frequency is only the first step towards quantifying the risk of a catastrophic event. For any given event we need to know: Are any structures affected? What type of buildings are they? How much damaged occurred? How much will the repairs cost? To achieve this, detailed exposure information is required to assess the likely damage and to effectively calculate the resultant loss. Modelling exposures in the Built Environment therefore plays as important a role in understanding re/insurance risk as characterising the physical hazard. Across both primary insurance books and aggregated reinsurance portfolios, the location of a property (a risk) and its monetary value is typically known. Exactly what that risk is in terms of detailed property descriptors including structure type and rebuild cost - and therefore its vulnerability to loss - is often omitted. This data deficiency is a primary source of variations between modelled losses and the actual claims value. Built Environment models are therefore required at a high resolution to describe building attributes that relate vulnerability to property damage. However, national-scale household-level datasets are often not computationally practical in catastrophe models and data must be aggregated. In order to provide more accurate risk analysis, we have developed and applied a methodology for Built Environment modelling for incorporation into a range of re/insurance applications, including operational models for different international regions and different perils and covering residential, commercial and industry exposures. Illustrated examples are presented, including exposure modelling suitable for aggregated reinsurance analysis for the UK and bespoke high resolution

  8. System response of a DOE Defense Program package in a transportation accident environment

    International Nuclear Information System (INIS)

    Chen, T.F.; Hovingh, J.; Kimura, C.Y.

    1992-01-01

    The system response in a transportation accident environment is an element to be considered in an overall Transportation System Risk Assessment (TSRA) framework. The system response analysis uses the accident conditions and the subsequent accident progression analysis to develop the accident source term, which in turn, is used in the consequence analysis. This paper proposes a methodology for the preparation of the system response aspect of the TSRA

  9. A simple interface to computational fluid dynamics programs for building environment simulations

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, III, C R; Chen, Q [Massachusetts Institute of Technology, Cambridge, MA (United States)

    2000-07-01

    It is becoming a popular practice for architects and HVAC engineers to simulate airflow in and around buildings by computational fluid dynamics (CFD) methods in order to predict indoor and outdoor environment. However, many CFD programs are crippled by a historically poor and inefficient user interface system, particularly for users with little training in numerical simulation. This investigation endeavors to create a simplified CFD interface (SCI) that allows architects and buildings engineers to use CFD without excessive training. The SCI can be easily integrated into new CFD programs. (author)

  10. Performance analysis and optimization of AMGA for the WISDOM environment

    CERN Document Server

    Ahn, Sunil; Lee, Seehoon; Hwang, Soonwook; Breton, Vincent; Koblitz, Birger

    2008-01-01

    AMGA is a gLite-metadata catalogue service designed to offer access to metadata for files stored on the Grid. We evaluated AMGA to analyze whether it is suitable for the WISDOM environment, where thousands of jobs access it simultaneously to get metadata describing docking results and the status of jobs. In this work, we address performance issues on AMGA and propose new techniques to improve AMGA performance in the WISDOM environment. In the WISDOM environment, thousands of job agents distributed on the Grid may have access to an AMGA server simultaneously (1) to take docking tasks out of the AMGA server to execute on the machine that they are sitting, (2) to get the related ligand and target information, and (3) to store the docking results. The docking tasks take about 10 to 30 minutes to finish depending on the machine that they run and the docking configuration. We have carried out some performance analysis on the current AMGA implementation. Due to the overhead required to handle GSI/SSL connection on t...

  11. Communication and cooperation in networked environments: an experimental analysis.

    Science.gov (United States)

    Galimberti, C; Ignazi, S; Vercesi, P; Riva, G

    2001-02-01

    Interpersonal communication and cooperation do not happen exclusively face to face. In work contexts, as in private life, there are more and more situations of mediated communication and cooperation in which new online tools are used. However, understanding how to use the Internet to support collaborative interaction presents a substantial challenge for the designers and users of this emerging technology. First, collaborative Internet environments are designed to serve a purpose, so must be designed with intended users' tasks and goals explicitly considered. Second, in cooperative activities the key content of communication is the interpretation of the situations in which actors are involved. So, the most effective way of clarifying the meaning of messages is to connect them to a shared context of meaning. However, this is more difficult in the Internet than in other computer-based activities. This paper tries to understand the characteristics of cooperative activities in networked environments--shared 3D virtual worlds--through two different studies. The first used the analysis of conversations to explore the characteristics of the interaction during the cooperative task; the second analyzed whether and how the level of immersion in the networked environments influenced the performance and the interactional process. The results are analyzed to identify the psychosocial roots used to support cooperation in a digital interactive communication.

  12. How is an analysis of the enterprise economic environment done?

    Directory of Open Access Journals (Sweden)

    Carlos Parodi Trece

    2015-09-01

    Full Text Available The proper interpretation of the evolution of the economy is a useful tool to improve corporate decision-making. The aim of this paper is to explain, with examples applied to the current economic reality, how an analysis of the economic environment is made and how it serves for the corporate strategic planning. To do this, after the explanation of the overall conceptual framework; gross domestic product, inflation and external deficit as indicators, key in the "language" used by analysts are defined. These are economic indicators, related, that depend on domestic policy and exogenous shocks, defined as events that are out of the hands of economic policy designers, but that influence the three variables, such as the international financial crisis. Following it, the formalization through macroeconomic identities is made, in order to finally explain "how is the economy" through them; and the relationship between the internal to the external economic environment. Bringing the economy to business should be a priority in an increasingly integrated context, characterized by the fact that the positive and the negative of what happens in the world economy is transmitted through various channels, to companies located in different countries. Hence, companies should broaden their vision, as the economic environment does not only include what happens within the country, but the future of the world economy.

  13. Potential research money available from the Acid Deposition Program and Alberta Environment

    International Nuclear Information System (INIS)

    Primus, C.L.

    1992-01-01

    It is exceedingly difficult to demonstrate definitive long-term changes in animal health as a result of acid-forming emissions from sour gas wells. A summary is presented of current research in Alberta, followed by the potential for research funding by the Alberta Government/Industry Acid Deposition Program (ADRP). The Alberta Environment research budget consists of four programs in addition to the ADRP: acid deposition effects research in the Athabasca oil sands; western and northern Canada long-range transport of air pollutants; departmental monitoring; and inhalation toxicology and animal health. Animal health research, although a component of the acid deposition issue, is beyond the mandate of Alberta Environment, and the ADRP members committee does not forsee becoming involved in the long-term and complex research required to address the effects of acid-forming emissions on livestock. Funds for additional animal health research must come from other government departments and agencies whose mandate covers this area

  14. Achieving behavioral control with millisecond resolution in a high-level programming environment.

    Science.gov (United States)

    Asaad, Wael F; Eskandar, Emad N

    2008-08-30

    The creation of psychophysical tasks for the behavioral neurosciences has generally relied upon low-level software running on a limited range of hardware. Despite the availability of software that allows the coding of behavioral tasks in high-level programming environments, many researchers are still reluctant to trust the temporal accuracy and resolution of programs running in such environments, especially when they run atop non-real-time operating systems. Thus, the creation of behavioral paradigms has been slowed by the intricacy of the coding required and their dissemination across labs has been hampered by the various types of hardware needed. However, we demonstrate here that, when proper measures are taken to handle the various sources of temporal error, accuracy can be achieved at the 1 ms time-scale that is relevant for the alignment of behavioral and neural events.

  15. Development of programming techniques for behaviors of nuclear robot in real environment

    International Nuclear Information System (INIS)

    Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

    1999-01-01

    This study aims at establishment of synthetic autonomous technique on nuclear robot for a basic technique to realize remote control and automation of works in a nuclear plant by means of development on action programming function under actual environment. Before 1997 fiscal year, development of manipulation description system due to contact state transition series, development of mechanical assembly work instruction system using contact actuating system, development of new manipulator system with excellent controllability, development of quasi contact point monitoring method, and development of environmental model construction method using range finder and instruction tree, had been conducted. In 1997 fiscal year, probability of nuclear robot, on synthetic autonomous technique was shown by synthesis of many results on action programming planning function into a prototype system under an actual environment obtained by those developments. (G.K.)

  16. The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 2: Program integration guide

    Science.gov (United States)

    Jones, Kennie H.; Randall, Donald P.; Stallcup, Scott S.; Rowell, Lawrence F.

    1988-01-01

    The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational data base management system. In volume 2, the use of a SYSTEM LIBRARY PROCESSOR is used to construct a DATA DICTIONARY describing all relations defined in the data base, and a TEMPLATE LIBRARY. A TEMPLATE is a description of all subsets of relations (including conditional selection criteria and sorting specifications) to be accessed as input or output for a given application. Together, these form the SYSTEM LIBRARY which is used to automatically produce the data base schema, FORTRAN subroutines to retrieve/store data from/to the data base, and instructions to a generic REVIEWER program providing review/modification of data for a given template. Automation of these functions eliminates much of the tedious, error prone work required by the usual approach to data base integration.

  17. A Drawing and Multi-Representational Computer Environment for Beginners' Learning of Programming Using C: Design and Pilot Formative Evaluation

    Science.gov (United States)

    Kordaki, Maria

    2010-01-01

    This paper presents both the design and the pilot formative evaluation study of a computer-based problem-solving environment (named LECGO: Learning Environment for programming using C using Geometrical Objects) for the learning of computer programming using C by beginners. In its design, constructivist and social learning theories were taken into…

  18. Cost Analysis In A Multi-Mission Operations Environment

    Science.gov (United States)

    Newhouse, M.; Felton, L.; Bornas, N.; Botts, D.; Roth, K.; Ijames, G.; Montgomery, P.

    2014-01-01

    Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the

  19. The Future of the Global Environment: A Model-based Analysis Supporting UNEP's First Global Environment Outlook

    OpenAIRE

    Bakkes JA; Woerden JW van; Alcamo J; Berk MM; Bol P; Born GJ van den; Brink BJE ten; Hettelingh JP; Langeweg F; Niessen LW; Swart RJ; United Nations Environment Programme (UNEP), Nairobi, Kenia; MNV

    1997-01-01

    This report documents the scenario analysis in UNEP's first Global Environment Outlook, published at the same time as the scenario analysis. This Outlook provides a pilot assessment of developments in the environment, both global and regional, between now and 2015, with a further projection to 2050. The study was carried out in support of the Agenda 21 interim evaluation, five years after 'Rio' and ten years after 'Brundtland'. The scenario analysis is based on only one scenario, Conventional...

  20. Long-term preservation of analysis software environment

    International Nuclear Information System (INIS)

    Toppe Larsen, Dag; Blomer, Jakob; Buncic, Predrag; Charalampidis, Ioannis; Haratyunyan, Artem

    2012-01-01

    Long-term preservation of scientific data represents a challenge to experiments, especially regarding the analysis software. Preserving data is not enough; the full software and hardware environment is needed. Virtual machines (VMs) make it possible to preserve hardware “in software”. A complete infrastructure package has been developed for easy deployment and management of VMs, based on CERN virtual machine (CernVM). Further, a HTTP-based file system, CernVM file system (CVMFS), is used for the distribution of the software. It is possible to process data with any given software version, and a matching, regenerated VM version. A point-and-click web user interface is being developed for setting up the complete processing chain, including VM and software versions, number and type of processing nodes, and the particular type of analysis and data. This paradigm also allows for distributed cloud-computing on private and public clouds, for both legacy and contemporary experiments.

  1. VHDL-based programming environment for Floating-Gate analog memory cell

    Directory of Open Access Journals (Sweden)

    Carlos Alberto dos Reis Filho

    2005-02-01

    Full Text Available An implementation in CMOS technology of a Floating-Gate Analog Memory Cell and Programming Environment is presented. A digital closed-loop control compares a reference value set by user and the memory output and after cycling, the memory output is updated and the new value stored. The circuit can be used as analog trimming for VLSI applications where mechanical trimming associated with postprocessing chip is prohibitive due to high costs.

  2. Virtual learning object and environment: a concept analysis.

    Science.gov (United States)

    Salvador, Pétala Tuani Candido de Oliveira; Bezerril, Manacés Dos Santos; Mariz, Camila Maria Santos; Fernandes, Maria Isabel Domingues; Martins, José Carlos Amado; Santos, Viviane Euzébia Pereira

    2017-01-01

    To analyze the concept of virtual learning object and environment according to Rodgers' evolutionary perspective. Descriptive study with a mixed approach, based on the stages proposed by Rodgers in his concept analysis method. Data collection occurred in August 2015 with the search of dissertations and theses in the Bank of Theses of the Coordination for the Improvement of Higher Education Personnel. Quantitative data were analyzed based on simple descriptive statistics and the concepts through lexicographic analysis with support of the IRAMUTEQ software. The sample was made up of 161 studies. The concept of "virtual learning environment" was presented in 99 (61.5%) studies, whereas the concept of "virtual learning object" was presented in only 15 (9.3%) studies. A virtual learning environment includes several and different types of virtual learning objects in a common pedagogical context. Analisar o conceito de objeto e de ambiente virtual de aprendizagem na perspectiva evolucionária de Rodgers. Estudo descritivo, de abordagem mista, realizado a partir das etapas propostas por Rodgers em seu modelo de análise conceitual. A coleta de dados ocorreu em agosto de 2015 com a busca de dissertações e teses no Banco de Teses e Dissertações da Coordenação de Aperfeiçoamento de Pessoal de Nível Superior. Os dados quantitativos foram analisados a partir de estatística descritiva simples e os conceitos pela análise lexicográfica com suporte do IRAMUTEQ. A amostra é constituída de 161 estudos. O conceito de "ambiente virtual de aprendizagem" foi apresentado em 99 (61,5%) estudos, enquanto o de "objeto virtual de aprendizagem" em apenas 15 (9,3%). Concluiu-se que um ambiente virtual de aprendizagem reúne vários e diferentes tipos de objetos virtuais de aprendizagem em um contexto pedagógico comum.

  3. Intrasystem Electromagnetic Compatibility Analysis Program. Volume III. Computer Program Documentation

    Science.gov (United States)

    1974-12-01

    Cor intied) PROGRAM NAME SIMBOL DEFINITION FQEPDB fep IN dB FQEPL LOWER INTERVAL BOUNDARY FREQ OF fep FQEPU UPPER INTERVAL BOUNDARY FREQ OF f .4, fep...I• TOR. VARIABLES L __G~~ NM SIMBOL DEFINITION BWFE 1 BANDWIDTH FACTOR OF EM’TR BANDWIDTH FACTOR OF RCPT EINTB INTEGRATBD MARGIN BROAD BAND COMPON

  4. Structuring learning environments: Lessons from the organization of post-literacy programs

    Science.gov (United States)

    Easton, Peter A.

    1989-12-01

    New conceptual and historical work on the nature of literacy and information on several bellwether post-literacy efforts in developing countries furnish a basis for diagnosing some of the deficiencies in current approaches to post-literacy programming. The key issue is the design of a `literate environment'. Heretofore attention has been concentrated too exclusively on the reading materials and continuing education side of the problem, and insufficient attention has been given to the more critical and difficult aspect: ensuring adequate opportunities for the application of new literate skills. The availability of these functional opportunities is closely related to the possibilities for accumulation and reinvestment of economic surplus in the environment, and to the way in which the related activities are organized. Literacy programs can unite skills relevant to management of local resources with strategies of cultural, political or religious revitalization that mobilize people to use their human resources. They therefore continue to offer an attractive means of initiating a reinvestment spiral from limited initial capital. To realize these potentials at the post-literacy stage, however, requires planning post-literacy before literacy, broadening programs to address primary school leavers as well, and paying greatly increased attention to the economic and social structure of the learning environment.

  5. Developing the leadership skills of new graduates to influence practice environments: a novice nurse leadership program.

    Science.gov (United States)

    Dyess, Susan; Sherman, Rose

    2011-01-01

    The authors of the recently published Institute of Medicine on the Future of Nursing report emphasized the importance of preparing nurses to lead change to advance health care in the United States. Other scholars linked practice environments to safe quality care. In order for nurses to fully actualize this role in practice environments, they need to possess leadership skills sets that identify and respond to challenges faced. New nurses are no exception. This article presents a program with a 5-year track record that is designed to support transition and enhance the skill sets of leadership for new nurses in their first year of practice. Qualitative and quantitative evaluation measurements at baseline and postprogram provided data for evaluation of the first 4 cohorts in the program. Evaluative outcomes presented indicate that new nurses gained leadership and translational research skills that contributed to their ability to influence practice environments. Nonetheless, practice environments continue to need improvement and ongoing leadership from all levels of nursing must be upheld.

  6. Universal spectrum data analysis program for microsoft windows

    International Nuclear Information System (INIS)

    Hao, F.; Cai, Z.; Wang, H.

    1993-01-01

    We have developed a universal spectrum analysis and characterization program the Microsoft Windows environment. This sophisticated and easy to use software package can be employed in many areas for spectra data analysis, parametrization and line profile recognition. Spectra can for example be smoothed, calibrated and transformed from the laboratory frame to the projectile frame and background can be subtracted by using cubic spline functions or exponential functions. Up to 10 peaks and 40 different parameters can be fitted simultaneously either automatically by least squares routines or manually by system interactive devices. Line profiles include triangular, Gaussian, Lorentzian, Fano, Shore, post collisonal interactions functions etc., and also can be easily expanded to virtually any nonlinear fitting function. In addition, Fast Fourier Transform (FFT) routines allow users to convolute, deconvolute or Fourier analyze complex spectral patterns. Specifically this program has been applied for high resolution electron- and photon emission spectra following electron or ion collision with gaseous targets. Some examples for data evaluation will be presented

  7. Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

    Energy Technology Data Exchange (ETDEWEB)

    Blakely, D [Alberta Environment, Edmonton, AB (Canada)

    2009-07-01

    Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

  8. RAMPAC: a Program for Analysis of Complicated Raman Spectra

    NARCIS (Netherlands)

    de Mul, F.F.M.; Greve, Jan

    1993-01-01

    A computer program for the analysis of complicated (e.g. multi-line) Raman spectra is described. The program includes automatic peak search, various procedures for background determination, peak fit and spectrum deconvolution and extensive spectrum handling procedures.

  9. Statistical treatment of the data related to Environment Monitoring Program of the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN, Brazil

    International Nuclear Information System (INIS)

    Peixoto, Claudia M.; Jacomino, Vanusa Maria F.; Pego, Valdivio Damasceno

    1999-01-01

    The basic goal in all environmental data analysis is to characterize the value of some parameter in a portion of the environment over some period of time to a stated degree of accuracy from a limited number of data points. More reliability in the results can be acquired if a proper statistical treatment of the data including estimates of precision, frequency distribution analysis and group comparisons, is performed as part of an environmental surveillance program. The main objective of this paper is to describe the procedures adopted for performing the analysis and statistical treatment of the data obtained in the Environmental Monitoring Program of CDTN during the period of 1993 to 1995. In this study, the results of total alpha and beta concentrations in airborne particulates and surface water samples are considered. In this case, the statistical treatment involved the variability estimation and frequency distribution analysis. Time series analysis of the results is carried out through sequential graphics, which give information about the long-term behavior of the variables. (author) work. (author)

  10. User's guide of parallel program development environment (PPDE). The 2nd edition

    International Nuclear Information System (INIS)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio; Ohta, Hirofumi

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a parallelizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  11. User's guide of parallel program development environment (PPDE). The 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  12. User's guide of parallel program development environment (PPDE). The 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  13. Policy, environment, and worksite fitness program participation among financial enterprise employees in Taiwan.

    Science.gov (United States)

    Huang, Sheu-Jen; Hung, Wen-Chi

    2016-06-01

    This study explored the intertwined effects between the policies and regulations of the companies and personal background on participation in the physical fitness programs and leisure-time activities in financial enterprises. A total of 823 employees were selected as the sample with the multilevel stratification random-sampling technique. The response rate was 52.0%. Data were analyzed with descriptive statistics and hierarchical linear logistic regression. Thirty-two percent and 39% of the employees participated in the physical fitness programs and leisure-time activities, respectively. The factors affecting participation were categorized into intrapersonal factors, interpersonal processes, and primary groups, as well as institutional factors. In the interpersonal processes and primary groups level, higher family social support, more equipment in health promotion was associated with more participation in the programs. With the influence from the institutional level, it was found that health promotion policy amplified the relationship between employees' age and participation, but attenuated the relationship between education level and participation. Health promotion equipment in the institutes attenuated the relationship between colleague social support, family social support, and education level with program participation. Physical activity equipment in the community attenuated the relationship between family social support and program participation. The influential factors of social support and worksite environment could predict the employees' participation in the physical fitness programs and leisure-time physical activities. Health promotion policy and equipment attenuated the negative effects of nonparticipation as well as amplified the positive effects of participation.

  14. Integrated Software Environment for Pressurized Thermal Shock Analysis

    Directory of Open Access Journals (Sweden)

    Dino Araneo

    2011-01-01

    Full Text Available The present paper describes the main features and an application to a real Nuclear Power Plant (NPP of an Integrated Software Environment (in the following referred to as “platform” developed at University of Pisa (UNIPI to perform Pressurized Thermal Shock (PTS analysis. The platform is written in Java for the portability and it implements all the steps foreseen in the methodology developed at UNIPI for the deterministic analysis of PTS scenarios. The methodology starts with the thermal hydraulic analysis of the NPP with a system code (such as Relap5-3D and Cathare2, during a selected transient scenario. The results so obtained are then processed to provide boundary conditions for the next step, that is, a CFD calculation. Once the system pressure and the RPV wall temperature are known, the stresses inside the RPV wall can be calculated by mean a Finite Element (FE code. The last step of the methodology is the Fracture Mechanics (FM analysis, using weight functions, aimed at evaluating the stress intensity factor (KI at crack tip to be compared with the critical stress intensity factor KIc. The platform automates all these steps foreseen in the methodology once the user specifies a number of boundary conditions at the beginning of the simulation.

  15. Overview of a radiation safety program in a district style medical environment

    International Nuclear Information System (INIS)

    Wilson, G.

    2006-01-01

    This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

  16. Virtual Property Manager: Providing a Simulated Learning Environment in a New University Program of Study

    Directory of Open Access Journals (Sweden)

    Andrew Carswell

    2007-08-01

    Full Text Available This paper relates the experience that students have while accessing Virtual Property Manager (VPM, a Web-based simulation learning tool designed to introduce students to a new discipline being offered at the university – Residential Property Management. The VPM simulation was designed in part to develop student interest in the new program. Results indicate that this simple simulation device did make a notable impact on student interest. Additionally, student acceptance and self-reported impact differed significantly based upon the delivery context. Adding a competitive reward element to the simulation experience improved student's evaluation of the software and self-reported interest in the field. Results indicate that educational simulation evaluation, acceptance, and performance may often be substantially influenced by the delivery context, rather than simply the program itself. Developers may do well to focus "outside the box" of program content to promote audience-specific delivery environments.

  17. An adaptive staircase procedure for the E-Prime programming environment.

    Science.gov (United States)

    Hairston, W David; Maldjian, Joseph A

    2009-01-01

    Many studies need to determine a subject's threshold for a given task. This can be achieved efficiently using an adaptive staircase procedure. While the logic and algorithms for staircases have been well established, the few pre-programmed routines currently available to researchers require at least moderate programming experience to integrate into new paradigms and experimental settings. Here, we describe a freely distributed routine developed for the E-Prime programming environment that can be easily integrated into any experimental protocol with only a basic understanding of E-Prime. An example experiment (visual temporal-order-judgment task) where subjects report the order of occurrence of two circles illustrates the behavior and consistency of the routine.

  18. Environmental program with operational cases to reduce risk to the marine environment significantly

    International Nuclear Information System (INIS)

    Cline, J.T.; Forde, R.

    1991-01-01

    In this paper Amoco Norway Oil Company's environmental program is detailed, followed by example operational programs and achievements aimed to minimize environmental risks to the marine environment at Valhall platform. With a corporate goal to be a leader in protecting the environment, the appropriate strategies and policies that form the basis of the environmental management system are incorporated in the quality assurance programs. Also, included in the program are necessary organizational structures, responsibilities of environmental affairs and line organization personnel, compliance procedures and a waste task force obliged to implement operations improvements. An internal environmental audit system has been initiated, in addition to corporate level audits, which, when communicated to the line organization closes the environmental management loop through experience feed back. Environmental projects underway are significantly decreasing the extent and/or risk of pollution from offshore activities. The cradle to grave responsibility is assumed with waste separated offshore and onshore followed by disposal in audited sites. A $5 MM program is underway to control produced oily solids and reduce oil in produced water aiming to less than 20 ppm. When oil-based mud is used in deeper hole sections, drill solids disposed at sea average less than 60 g oil/kg dry cuttings using appropriate shaker screens, and a washing/centrifuge system to remove fines. Certain oily liquid wastes are being injected down hole whereas previously they were burned using a mud burner. Finally, a program is underway with a goal to eliminate sea discharge of oil on cuttings through injection disposal of oily wastes, drilling with alternative muds such as a cationic water base mud, and/or proper onshore disposal of oily wastes

  19. Work program analysis - defining the capability/risk plan

    International Nuclear Information System (INIS)

    Hrinivich, W.A.

    2004-01-01

    Bruce Power has developed and implemented an analysis methodology (Work Program Analysis) to assess and address corporate business risk associated with work group capability. Work Program Analysis is proving to be an excellent tool for identifying and supporting key business decisions facing the line and senior management at Bruce Power. The following describes the methodology, its application and the results achieved. (author)

  20. HTC Experimental Program: Validation and Calculational Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fernex, F.; Ivanova, T.; Bernard, F.; Letang, E. [Inst Radioprotect and Surete Nucl, F-92262 Fontenay Aux Roses (France); Fouillaud, P. [CEA Valduc, Serv Rech Neutron and Critcite, 21 - Is-sur-Tille (France); Thro, J. F. [AREVA NC, F-78000 Versailles (France)

    2009-05-15

    In the 1980's a series of the Haut Taux de Combustion (HTC) critical experiments with fuel pins in a water-moderated lattice was conducted at the Apparatus B experimental facility in Valduc (Commissariat a I'Energie Atomique, France) with the support of the Institut de Radioprotection et de Surete Nucleaire and AREVA NC. Four series of experiments were designed to assess profit associated with actinide-only burnup credit in the criticality safety evaluation for fuel handling, pool storage, and spent-fuel cask conditions. The HTC rods, specifically fabricated for the experiments, simulated typical pressurized water reactor uranium oxide spent fuel that had an initial enrichment of 4. 5 wt% {sup 235}U and was burned to 37.5 GWd/tonne U. The configurations have been modeled with the CRISTAL criticality package and SCALE 5.1 code system. Sensitivity/uncertainty analysis has been employed to evaluate the HTC experiments and to study their applicability for validation of burnup credit calculations. This paper presents the experimental program, the principal results of the experiment evaluation, and modeling. The HTC data applicability to burnup credit validation is demonstrated with an example of spent-fuel storage models. (authors)

  1. Dissimilar weld failure analysis and development program

    International Nuclear Information System (INIS)

    Holko, K.H.; Li, C.C.

    1982-01-01

    The problem of dissimilar weld cracking and failure is examined. This problem occurs in boiler superheater and reheater sections as well as main steam piping. Typically, a dissimilar weld joins low-alloy steel tubing such as Fe-2-1/4 Cr-1Mo to stainless steel tubing such as 321H and 304H. Cracking and failure occur in the low-alloy steel heat-affected zone very close to the weld interface. The 309 stainless steel filler previously used has been replaced with nickel-base fillers such as Inconel 132, Inconel 182, and Incoweld A. This change has extended the time to cracking and failure, but has not solved the problem. To illustrate and define the problem, the metallography of damaged and failed dissimilar welds is described. Results of mechanical tests of dissimilar welds removed from service are presented, and factors believed to be influential in causing damage and failure are discussed. In addition, the importance of dissimilar weldment service history is demonstrated, and the Dissimilar Weld Failure Analysis and Development Program is described. 15 figures

  2. An Analysis of University Students' Attitudes towards Personalized Learning Environments

    Science.gov (United States)

    Sahin, Muhittin; Kisla, Tarik

    2016-01-01

    The aim of this research is to analyze university students' attitudes towards personalized learning environments with respect to the independent variables of gender, age, university, year of study, knowledge about the environment, participation in the environment and being willing to participate in the environment. The correlative survey model is…

  3. Growing Community: The Impact of the Stephanie Alexander Kitchen Garden Program on the Social and Learning Environment in Primary Schools

    Science.gov (United States)

    Block, Karen; Gibbs, Lisa; Staiger, Petra K.; Gold, Lisa; Johnson, Britt; Macfarlane, Susie; Long, Caroline; Townsend, Mardie

    2012-01-01

    This article presents results from a mixed-method evaluation of a structured cooking and gardening program in Australian primary schools, focusing on program impacts on the social and learning environment of the school. In particular, we address the Stephanie Alexander Kitchen Garden Program objective of providing a pleasurable experience that has…

  4. Microworlds, Games, Animations, Mobile Apps, Puzzle Editors and More: What Is Important for an Introductory Programming Environment?

    Science.gov (United States)

    Xinogalos, Stelios; Satratzemi, Maya; Malliarakis, Christos

    2017-01-01

    Teaching and learning programming constitutes a challenge. Although several teaching approaches and programming tools have been proposed, it seems that they have limited impact on classroom practice. This article investigates students' perceptions on five educational programming environments that are widely used and the features that any…

  5. Integrated predictive maintenance program vibration and lube oil analysis: Part I - history and the vibration program

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, H.

    1996-12-01

    This paper is the first of two papers which describe the Predictive Maintenance Program for rotating machines at the Palo Verde Nuclear Generating Station. The organization has recently been restructured and significant benefits have been realized by the interaction, or {open_quotes}synergy{close_quotes} between the Vibration Program and the Lube Oil Analysis Program. This paper starts with the oldest part of the program - the Vibration Program and discusses the evolution of the program to its current state. The {open_quotes}Vibration{close_quotes} view of the combined program is then presented.

  6. Integrated predictive maintenance program vibration and lube oil analysis: Part I - history and the vibration program

    International Nuclear Information System (INIS)

    Maxwell, H.

    1996-01-01

    This paper is the first of two papers which describe the Predictive Maintenance Program for rotating machines at the Palo Verde Nuclear Generating Station. The organization has recently been restructured and significant benefits have been realized by the interaction, or open-quotes synergyclose quotes between the Vibration Program and the Lube Oil Analysis Program. This paper starts with the oldest part of the program - the Vibration Program and discusses the evolution of the program to its current state. The open-quotes Vibrationclose quotes view of the combined program is then presented

  7. A Web-Based Development Environment for Collaborative Data Analysis

    Science.gov (United States)

    Erdmann, M.; Fischer, R.; Glaser, C.; Klingebiel, D.; Komm, M.; Müller, G.; Rieger, M.; Steggemann, J.; Urban, M.; Winchen, T.

    2014-06-01

    Visual Physics Analysis (VISPA) is a web-based development environment addressing high energy and astroparticle physics. It covers the entire analysis spectrum from the design and validation phase to the execution of analyses and the visualization of results. VISPA provides a graphical steering of the analysis flow, which consists of self-written, re-usable Python and C++ modules for more demanding tasks. All common operating systems are supported since a standard internet browser is the only software requirement for users. Even access via mobile and touch-compatible devices is possible. In this contribution, we present the most recent developments of our web application concerning technical, state-of-the-art approaches as well as practical experiences. One of the key features is the use of workspaces, i.e. user-configurable connections to remote machines supplying resources and local file access. Thereby, workspaces enable the management of data, computing resources (e.g. remote clusters or computing grids), and additional software either centralized or individually. We further report on the results of an application with more than 100 third-year students using VISPA for their regular particle physics exercises during the winter term 2012/13. Besides the ambition to support and simplify the development cycle of physics analyses, new use cases such as fast, location-independent status queries, the validation of results, and the ability to share analyses within worldwide collaborations with a single click become conceivable.

  8. A Web-Based Development Environment for Collaborative Data Analysis

    International Nuclear Information System (INIS)

    Erdmann, M; Fischer, R; Glaser, C; Klingebiel, D; Müller, G; Rieger, M; Urban, M; Winchen, T; Komm, M; Steggemann, J

    2014-01-01

    Visual Physics Analysis (VISPA) is a web-based development environment addressing high energy and astroparticle physics. It covers the entire analysis spectrum from the design and validation phase to the execution of analyses and the visualization of results. VISPA provides a graphical steering of the analysis flow, which consists of self-written, re-usable Python and C++ modules for more demanding tasks. All common operating systems are supported since a standard internet browser is the only software requirement for users. Even access via mobile and touch-compatible devices is possible. In this contribution, we present the most recent developments of our web application concerning technical, state-of-the-art approaches as well as practical experiences. One of the key features is the use of workspaces, i.e. user-configurable connections to remote machines supplying resources and local file access. Thereby, workspaces enable the management of data, computing resources (e.g. remote clusters or computing grids), and additional software either centralized or individually. We further report on the results of an application with more than 100 third-year students using VISPA for their regular particle physics exercises during the winter term 2012/13. Besides the ambition to support and simplify the development cycle of physics analyses, new use cases such as fast, location-independent status queries, the validation of results, and the ability to share analyses within worldwide collaborations with a single click become conceivable

  9. A Web-Based Development Environment for Collaborative Data Analysis

    CERN Document Server

    Erdmann, M; Glaser, C; Klingebiel, D; Komm, M; Müller, G; Rieger, M; Steggemann, J; Urban, M; Winchen, T

    2014-01-01

    Visual Physics Analysis (VISPA) is a web-based development environment addressing high energy and astroparticle physics. It covers the entire analysis spectrum from the design and validation phase to the execution of analyses and the visualization of results. VISPA provides a graphical steering of the analysis ow, which consists of self-written, re-usable Python and C++ modules for more demanding tasks. All common operating systems are supported since a standard internet browser is the only software requirement for users. Even access via mobile and touch-compatible devices is possible. In this contribution, we present the most recent developments of our web application concerning technical, state-of-the-art approaches as well as practical experiences. One of the key features is the use of workspaces, i.e. user-congurable connections to remote machines supplying resources and local le access. Thereby, workspaces enable the management of data, computing resources (e.g. remote clusters or computing grids), and a...

  10. Distributed analysis environment for HEP and interdisciplinary applications

    International Nuclear Information System (INIS)

    Moscicki, J.T.

    2003-01-01

    Huge data volumes of Larger Hadron Collider experiment require parallel end-user analysis on clusters of hundreds of machines. While the focus of end-user High-Energy Physics analysis is on ntuples, the master-worker model of parallel processing may be also used in other contexts such as detector simulation. The aim of DIANE R and D project (http://cern.ch/it-proj-diane) currently held by CERN IT/API group is to create a generic, component-based framework for distributed, parallel data processing in master-worker model. Pre-compiled user analysis code is loaded dynamically at runtime in component libraries and called back when appropriate. Such application-oriented framework must be flexible enough to integrate with the emerging GRID technologies as they become available in the time to come. Therefore, common services such as environment reconstruction, code distribution, load balancing and authentication are designed and implemented as pluggable modules. This approach allows to easily replace them with modules implemented with newer technology as necessary. The paper gives an overview of DIANE architecture and explains the main design choices. Selected examples of diverse applications from a variety of domains applicable to DIANE are presented. As well as preliminary benchmarking results

  11. Distributed analysis environment for HEP and interdisciplinary applications

    CERN Document Server

    Moscicki, J T

    2003-01-01

    Huge data volumes of Large Hadron Collider experiments require parallel end-user analysis on clusters of hundreds of machines. While the focus of end-user High-Energy Physics analysis is on ntuples, the master-worker model of parallel processing may be also used in other contexts such as detector simulation. The aim of DIANE R&D project (http://cern.ch/it-proj-diane) currently held by CERN IT/API group is to create a generic, component-based framework for distributed, parallel data processing in master-worker model. Pre-compiled user analysis code is loaded dynamically at runtime in component libraries and called back when appropriate. Such application-oriented framework must be flexible enough to integrate with the emerging GRID technologies as they become available in the time to come. Therefore, common services such as environment reconstruction, code distribution, load balancing and authentication are designed and implemented as pluggable modules. This approach allows to easily replace them with modul...

  12. Multivariate Gradient Analysis for Evaluating and Visualizing a Learning System Platform for Computer Programming

    Science.gov (United States)

    Mather, Richard

    2015-01-01

    This paper explores the application of canonical gradient analysis to evaluate and visualize student performance and acceptance of a learning system platform. The subject of evaluation is a first year BSc module for computer programming. This uses "Ceebot," an animated and immersive game-like development environment. Multivariate…

  13. Performance Analysis of Information Services in a Grid Environment

    Directory of Open Access Journals (Sweden)

    Giovanni Aloisio

    2004-10-01

    Full Text Available The Information Service is a fundamental component in a grid environment. It has to meet a lot of requirements such as access to static and dynamic information related to grid resources, efficient and secure access to dynamic data, decentralized maintenance, fault tolerance etc., in order to achieve better performance, scalability, security and extensibility. Currently there are two different major approaches. One is based on a directory infrastructure and another one on a novel approach that exploits a relational DBMS. In this paper we present a performance comparison analysis between Grid Resource Information Service (GRIS and Local Dynamic Grid Catalog relational information service (LDGC, providing also information about two projects (iGrid and Grid Relational Catalog in the grid data management area.

  14. Augmented reality environment for temporomandibular joint motion analysis.

    Science.gov (United States)

    Wagner, A; Ploder, O; Zuniga, J; Undt, G; Ewers, R

    1996-01-01

    The principles of interventional video tomography were applied for the real-time visualization of temporomandibular joint movements in an augmented reality environment. Anatomic structures were extracted in three dimensions from planar cephalometric radiographic images. The live-image fusion of these graphic anatomic structures with real-time position data of the mandible and the articular fossa was performed with a see-through, head-mounted display and an electromagnetic tracking system. The dynamic fusion of radiographic images of the temporomandibular joint to anatomic temporomandibular joint structures in motion created a new modality for temporomandibular joint motion analysis. The advantages of the method are its ability to accurately examine the motion of the temporomandibular joint in three dimensions without restraining the subject and its ability to simultaneously determine the relationship of the bony temporomandibular joint and supporting structures (ie, occlusion, muscle function, etc) during movement before and after treatment.

  15. Application of advanced irradiation analysis methods to light water reactor pressure vessel test and surveillance programs

    International Nuclear Information System (INIS)

    Odette, R.; Dudey, N.; McElroy, W.; Wullaert, R.; Fabry, A.

    1977-01-01

    Inaccurate characterization and inappropriate application of neutron irradiation exposure variables contribute a substantial amount of uncertainty to embrittlement analysis of light water reactor pressure vessels. Damage analysis involves characterization of the irradiation environment (dosimetry), correlation of test and surveillance metallurgical and dosimetry data, and projection of such data to service conditions. Errors in available test and surveillance dosimetry data are estimated to contribute a factor of approximately 2 to the data scatter. Non-physical (empirical) correlation procedures and the need to extrapolate to the vessel may add further error. Substantial reductions in these uncertainties in future programs can be obtained from a more complete application of available damage analysis tools which have been developed for the fast reactor program. An approach to reducing embrittlement analysis errors is described, and specific examples of potential applications are given. The approach is based on damage analysis techniques validated and calibrated in benchmark environments

  16. Annual highlights, Environmental Programs of the Department of Energy and Environment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Brief summaries are presented of some 35 individual programs covering a wide range of activities in the atmospheric, oceanographic, and terrestrial ecology areas. In general, these programs are involved with the study of pollutants resulting from the production of energy and their effects or potential effects on the environment. Programs include meteorology and plume dispersion, with emphasis on tracing plumes from the tall stacks of fossil-fuel burning power plants, and implementation of MAP3S (the Multistate Atmospheric Power Production Pollution Study), including both field and modeling studies related to atmospheric pollutants in the Northeastern United States, the meteorology of the coastal land-sea interface, the development of long-distance tracer systems for following movements of air masses, the measurement of a series of pollutants at ambient levels in real time, and laboratory and field studies on the collection and behavior of aerosol particulates, including work on the speciation and quantification of sulfate particulates. The objective of programs in oceanographic sciences is to assess the potential impact of energy-related activities (reactor releases, oil spills, etc.) on the Northeast coastal zone and its biota. A capability for the study of environmental virology has been established. Another major program is the study of the effects of acid rain on forest ecosystems and on selected crops.

  17. Annual highlights, Environmental Programs of the Department of Energy and Environment

    International Nuclear Information System (INIS)

    1977-12-01

    Brief summaries are presented of some 35 individual programs covering a wide range of activities in the atmospheric, oceanographic, and terrestrial ecology areas. In general, these programs are involved with the study of pollutants resulting from the production of energy and their effects or potential effects on the environment. Programs include meteorology and plume dispersion, with emphasis on tracing plumes from the tall stacks of fossil-fuel burning power plants, and implementation of MAP3S (the Multistate Atmospheric Power Production Pollution Study), including both field and modeling studies related to atmospheric pollutants in the Northeastern United States, the meteorology of the coastal land-sea interface, the development of long-distance tracer systems for following movements of air masses, the measurement of a series of pollutants at ambient levels in real time, and laboratory and field studies on the collection and behavior of aerosol particulates, including work on the speciation and quantification of sulfate particulates. The objective of programs in oceanographic sciences is to assess the potential impact of energy-related activities (reactor releases, oil spills, etc.) on the Northeast coastal zone and its biota. A capability for the study of environmental virology has been established. Another major program is the study of the effects of acid rain on forest ecosystems and on selected crops

  18. PABLM: a computer program to calculate accumulated radiation doses from radionuclides in the environment

    International Nuclear Information System (INIS)

    Napier, B.A.; Kennedy, W.E. Jr.; Soldat, J.K.

    1980-03-01

    A computer program, PABLM, was written to facilitate the calculation of internal radiation doses to man from radionuclides in food products and external radiation doses from radionuclides in the environment. This report contains details of mathematical models used and calculational procedures required to run the computer program. Radiation doses from radionuclides in the environment may be calculated from deposition on the soil or plants during an atmospheric or liquid release, or from exposure to residual radionuclides in the environment after the releases have ended. Radioactive decay is considered during the release of radionuclides, after they are deposited on the plants or ground, and during holdup of food after harvest. The radiation dose models consider several exposure pathways. Doses may be calculated for either a maximum-exposed individual or for a population group. The doses calculated are accumulated doses from continuous chronic exposure. A first-year committed dose is calculated as well as an integrated dose for a selected number of years. The equations for calculating internal radiation doses are derived from those given by the International Commission on Radiological Protection (ICRP) for body burdens and MPC's of each radionuclide. The radiation doses from external exposure to contaminated water and soil are calculated using the basic assumption that the contaminated medium is large enough to be considered an infinite volume or plane relative to the range of the emitted radiations. The equations for calculations of the radiation dose from external exposure to shoreline sediments include a correction for the finite width of the contaminated beach

  19. Sensitivity Analysis Techniques Applied in Video Streaming Service on Eucalyptus Cloud Environments

    Directory of Open Access Journals (Sweden)

    Rosangela Melo

    2018-01-01

    Full Text Available Nowdays, several streaming servers are available to provide a variety of multimedia applications such as Video on Demand in cloud computing environments. These environments have the business potential because of the pay-per-use model, as well as the advantages of easy scalability and, up-to-date of the packages and programs. This paper uses hierarchical modeling and different sensitivity analysis techniques to determine the parameters that cause the greatest impact on the availability of a Video on Demand. The results show that distinct approaches provide similar results regarding the sensitivity ranking, with specific exceptions. A combined evaluation indicates that system availability may be improved effectively by focusing on a reduced set of factors that produce large variation on the measure of interest.

  20. Frequency modulation television analysis: Threshold impulse analysis. [with computer program

    Science.gov (United States)

    Hodge, W. H.

    1973-01-01

    A computer program is developed to calculate the FM threshold impulse rates as a function of the carrier-to-noise ratio for a specified FM system. The system parameters and a vector of 1024 integers, representing the probability density of the modulating voltage, are required as input parameters. The computer program is utilized to calculate threshold impulse rates for twenty-four sets of measured probability data supplied by NASA and for sinusoidal and Gaussian modulating waveforms. As a result of the analysis several conclusions are drawn: (1) The use of preemphasis in an FM television system improves the threshold by reducing the impulse rate. (2) Sinusoidal modulation produces a total impulse rate which is a practical upper bound for the impulse rates of TV signals providing the same peak deviations. (3) As the moment of the FM spectrum about the center frequency of the predetection filter increases, the impulse rate tends to increase. (4) A spectrum having an expected frequency above (below) the center frequency of the predetection filter produces a higher negative (positive) than positive (negative) impulse rate.

  1. Pulseq-Graphical Programming Interface: Open source visual environment for prototyping pulse sequences and integrated magnetic resonance imaging algorithm development.

    Science.gov (United States)

    Ravi, Keerthi Sravan; Potdar, Sneha; Poojar, Pavan; Reddy, Ashok Kumar; Kroboth, Stefan; Nielsen, Jon-Fredrik; Zaitsev, Maxim; Venkatesan, Ramesh; Geethanath, Sairam

    2018-03-11

    To provide a single open-source platform for comprehensive MR algorithm development inclusive of simulations, pulse sequence design and deployment, reconstruction, and image analysis. We integrated the "Pulseq" platform for vendor-independent pulse programming with Graphical Programming Interface (GPI), a scientific development environment based on Python. Our integrated platform, Pulseq-GPI, permits sequences to be defined visually and exported to the Pulseq file format for execution on an MR scanner. For comparison, Pulseq files using either MATLAB only ("MATLAB-Pulseq") or Python only ("Python-Pulseq") were generated. We demonstrated three fundamental sequences on a 1.5 T scanner. Execution times of the three variants of implementation were compared on two operating systems. In vitro phantom images indicate equivalence with the vendor supplied implementations and MATLAB-Pulseq. The examples demonstrated in this work illustrate the unifying capability of Pulseq-GPI. The execution times of all the three implementations were fast (a few seconds). The software is capable of user-interface based development and/or command line programming. The tool demonstrated here, Pulseq-GPI, integrates the open-source simulation, reconstruction and analysis capabilities of GPI Lab with the pulse sequence design and deployment features of Pulseq. Current and future work includes providing an ISMRMRD interface and incorporating Specific Absorption Ratio and Peripheral Nerve Stimulation computations. Copyright © 2018 Elsevier Inc. All rights reserved.

  2. Computer program for compressible flow network analysis

    Science.gov (United States)

    Wilton, M. E.; Murtaugh, J. P.

    1973-01-01

    Program solves problem of an arbitrarily connected one dimensional compressible flow network with pumping in the channels and momentum balancing at flow junctions. Program includes pressure drop calculations for impingement flow and flow through pin fin arrangements, as currently found in many air cooled turbine bucket and vane cooling configurations.

  3. Performance Demonstration Program Plan for Analysis of Simulated Headspace Gases

    International Nuclear Information System (INIS)

    2006-01-01

    The Performance Demonstration Program (PDP) for headspace gases distributes sample gases of volatile organic compounds (VOCs) for analysis. Participating measurement facilities (i.e., fixed laboratories, mobile analysis systems, and on-line analytical systems) are located across the United States. Each sample distribution is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD) (DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department (NMED). The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the Headspace Gas (HSG) PDP. Participating measurement facilities analyze blind audit samples of simulated TRU waste package headspace gases according to the criteria set by this PDP Plan. Blind audit samples (hereafter referred to as PDP samples) are used as an independent means to assess each measurement facility's compliance with the WAP quality assurance objectives (QAOs). To the extent possible, the concentrations of VOC analytes in the PDP samples encompass the range of concentrations anticipated in actual TRU waste package headspace gas samples. Analyses of headspace gases are required by the WIPP to demonstrate compliance with regulatory requirements. These analyses must be performed by measurement facilities that have demonstrated acceptable performance in this PDP. These analyses are referred to as WIPP analyses and the TRU waste package headspace gas samples on which they are performed are referred to as WIPP samples in this document. Participating measurement

  4. Performance Demonstration Program Plan for Analysis of Simulated Headspace Gases

    International Nuclear Information System (INIS)

    2007-01-01

    The Performance Demonstration Program (PDP) for headspace gases distributes blind audit samples in a gas matrix for analysis of volatile organic compounds (VOCs). Participating measurement facilities (i.e., fixed laboratories, mobile analysis systems, and on-line analytical systems) are located across the United States. Each sample distribution is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD) (DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department (NMED). The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the Headspace Gas (HSG) PDP. Participating measurement facilities analyze blind audit samples of simulated TRU waste package headspace gases according to the criteria set by this PDP Plan. Blind audit samples (hereafter referred to as PDP samples) are used as an independent means to assess each measurement facility's compliance with the WAP quality assurance objectives (QAOs). To the extent possible, the concentrations of VOC analytes in the PDP samples encompass the range of concentrations anticipated in actual TRU waste package headspace gas samples. Analyses of headspace gases are required by the WIPP to demonstrate compliance with regulatory requirements. These analyses must be performed by measurement facilities that have demonstrated acceptable performance in this PDP. These analyses are referred to as WIPP analyses and the TRU waste package headspace gas samples on which they are performed are referred to as WIPP samples in this document

  5. Social Network Analysis of the Farabi Exchange Program: Student Mobility

    Science.gov (United States)

    Ugurlu, Zeynep

    2016-01-01

    Problem Statement: Exchange programs offer communication channels created through student and instructor exchanges; a flow of information takes place through these channels. The Farabi Exchange Program (FEP) is a student and instructor exchange program between institutions of higher education. Through the use of social network analysis and…

  6. QUASAR - an interactive program for spectrum analysis in personal computers

    International Nuclear Information System (INIS)

    Auler, L.T.; Nobrega, J.A.W. da.

    1991-11-01

    The QUASAR software for the interactive analysis and report of energy (pulse-height) and time (multichannel scaling) spectra is described. The operating instructions as well as the mathematical methods and algorithms used by the program are presented in detail. This program is an extension to the PULSAR program. (author)

  7. Stress analysis program system for nuclear vessel: STANSAS

    International Nuclear Information System (INIS)

    Okamoto, Asao; Michikami, Shinsuke

    1979-01-01

    IHI has developed a computer system of stress analysis and evaluation for nuclear vessels: STANSAS (STress ANalysis System for Axi-symmetric Structure). The system consists of more than twenty independent programs divided into the following six parts. 1. Programs for opening design by code rule. 2. Calculation model generating programs. 3. Load defining programs. 4. Structural analysis programs. 5. Load data/calculation results plotting programs. 6. Stress evaluation programs. Each program is connected with its pre- or post-processor through three data-bases which enable automatic data transfer. The user can make his choice of structural analysis programs in accordance with the problem to be solved. The interface to STANSAS can be easily installed in generalized structural analysis programs such as NASTRAN and MARC. For almost all tables and figures in the stress report, STANSAS has the function to print or plot out. The complicated procedures of ''Design by Analysis'' for pressure vessels have been well standardized by STANSAS. The system will give a high degree of efficiency and confidence to the design work. (author)

  8. Risk analysis for autonomous underwater vehicle operations in extreme environments.

    Science.gov (United States)

    Brito, Mario Paulo; Griffiths, Gwyn; Challenor, Peter

    2010-12-01

    Autonomous underwater vehicles (AUVs) are used increasingly to explore hazardous marine environments. Risk assessment for such complex systems is based on subjective judgment and expert knowledge as much as on hard statistics. Here, we describe the use of a risk management process tailored to AUV operations, the implementation of which requires the elicitation of expert judgment. We conducted a formal judgment elicitation process where eight world experts in AUV design and operation were asked to assign a probability of AUV loss given the emergence of each fault or incident from the vehicle's life history of 63 faults and incidents. After discussing methods of aggregation and analysis, we show how the aggregated risk estimates obtained from the expert judgments were used to create a risk model. To estimate AUV survival with mission distance, we adopted a statistical survival function based on the nonparametric Kaplan-Meier estimator. We present theoretical formulations for the estimator, its variance, and confidence limits. We also present a numerical example where the approach is applied to estimate the probability that the Autosub3 AUV would survive a set of missions under Pine Island Glacier, Antarctica in January-March 2009. © 2010 Society for Risk Analysis.

  9. Program packages for dynamics systems analysis and design

    International Nuclear Information System (INIS)

    Athani, V.V.

    1976-01-01

    The development of computer program packages for dynamic system analysis and design are reported. The purpose of developing these program packages is to take the burden of writing computer programs off the mind of the system engineer and to enable him to concentrate on his main system analysis and design work. Towards this end, four standard computer program packages have been prepared : (1) TFANA - starting from system transfer function this program computes transient response, frequency response, root locus and stability by Routh Hurwitz criterion, (2) TFSYN - classical synthesis using algebraic method of Shipley, (3) MODANA - starting from state equations of the system this program computes solution of state equations, controllability, observability and stability, (4) OPTCON - This program obtains solutions of (i) linear regulator problem, (ii) servomechanism problems and (iii) problem of pole placement. The paper describes these program packages with the help of flowcharts and illustrates their use with the help of examples. (author)

  10. After the Conference of United Nations Conference on Environment and Development. The national environmental action program

    International Nuclear Information System (INIS)

    1996-01-01

    Following to the Strategy, priorities and principles of the state environmental policy the government of the Slovak republic has accepted by resolution No 350/1996 the first National environmental action program (NEAP), This NEAP contains the measures for attaining of aims of the Strategy in all nine sectors of protection and creation of the environment. The NEAP contains 1356 measures with conceptual, legislative, economic, educational-educational, scientific-research (including monitoring) and organizational character. The measures of the NEAP in detail are discussed

  11. Genetic programming for evolving due-date assignment models in job shop environments.

    Science.gov (United States)

    Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

    2014-01-01

    Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

  12. Measurement and Analysis of P2P IPTV Program Resource

    Directory of Open Access Journals (Sweden)

    Wenxian Wang

    2014-01-01

    Full Text Available With the rapid development of P2P technology, P2P IPTV applications have received more and more attention. And program resource distribution is very important to P2P IPTV applications. In order to collect IPTV program resources, a distributed multi-protocol crawler is proposed. And the crawler has collected more than 13 million pieces of information of IPTV programs from 2009 to 2012. In addition, the distribution of IPTV programs is independent and incompact, resulting in chaos of program names, which obstructs searching and organizing programs. Thus, we focus on characteristic analysis of program resources, including the distributions of length of program names, the entropy of the character types, and hierarchy depth of programs. These analyses reveal the disorderly naming conventions of P2P IPTV programs. The analysis results can help to purify and extract useful information from chaotic names for better retrieval and accelerate automatic sorting of program and establishment of IPTV repository. In order to represent popularity of programs and to predict user behavior and popularity of hot programs over a period, we also put forward an analytical model of hot programs.

  13. Measurement and analysis of P2P IPTV program resource.

    Science.gov (United States)

    Wang, Wenxian; Chen, Xingshu; Wang, Haizhou; Zhang, Qi; Wang, Cheng

    2014-01-01

    With the rapid development of P2P technology, P2P IPTV applications have received more and more attention. And program resource distribution is very important to P2P IPTV applications. In order to collect IPTV program resources, a distributed multi-protocol crawler is proposed. And the crawler has collected more than 13 million pieces of information of IPTV programs from 2009 to 2012. In addition, the distribution of IPTV programs is independent and incompact, resulting in chaos of program names, which obstructs searching and organizing programs. Thus, we focus on characteristic analysis of program resources, including the distributions of length of program names, the entropy of the character types, and hierarchy depth of programs. These analyses reveal the disorderly naming conventions of P2P IPTV programs. The analysis results can help to purify and extract useful information from chaotic names for better retrieval and accelerate automatic sorting of program and establishment of IPTV repository. In order to represent popularity of programs and to predict user behavior and popularity of hot programs over a period, we also put forward an analytical model of hot programs.

  14. The Y2K program for scientific-analysis computer programs at AECL

    International Nuclear Information System (INIS)

    Popovic, J.; Gaver, C.; Chapman, D.

    1999-01-01

    The evaluation of scientific-analysis computer programs for year-2000 compliance is part of AECL' s year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

  15. The Y2K program for scientific-analysis computer programs at AECL

    International Nuclear Information System (INIS)

    Popovic, J.; Gaver, C.; Chapman, D.

    1999-01-01

    The evaluation of scientific analysis computer programs for year-2000 compliance is part of AECL's year-2000 (Y2K) initiative, which addresses both the infrastructure systems at AECL and AECL's products and services. This paper describes the Y2K-compliance program for scientific-analysis computer codes. This program involves the integrated evaluation of the computer hardware, middleware, and third-party software in addition to the scientific codes developed in-house. The project involves several steps: the assessment of the scientific computer programs for Y2K compliance, performing any required corrective actions, porting the programs to Y2K-compliant platforms, and verification of the programs after porting. Some programs or program versions, deemed no longer required in the year 2000 and beyond, will be retired and archived. (author)

  16. Integrating computer programs for engineering analysis and design

    Science.gov (United States)

    Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

    1983-01-01

    The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

  17. Analysis of Logic Programs Using Regular Tree Languages

    DEFF Research Database (Denmark)

    Gallagher, John Patrick

    2012-01-01

    The eld of nite tree automata provides fundamental notations and tools for reasoning about set of terms called regular or recognizable tree languages. We consider two kinds of analysis using regular tree languages, applied to logic programs. The rst approach is to try to discover automatically...... a tree automaton from a logic program, approximating its minimal Herbrand model. In this case the input for the analysis is a program, and the output is a tree automaton. The second approach is to expose or check properties of the program that can be expressed by a given tree automaton. The input...... to the analysis is a program and a tree automaton, and the output is an abstract model of the program. These two contrasting abstract interpretations can be used in a wide range of analysis and verication problems....

  18. Program Analysis and Its Relevance for Educational Research

    Directory of Open Access Journals (Sweden)

    Bernd Käpplinger

    2008-01-01

    Full Text Available Program analyses are frequently used in research on continuing education. The use of such analyses will be described in this article. Existing data sources, research topics, qualitative, quantitative and mixed methods, will be discussed. Three types of program analysis will be developed. The article ends with a discussion of the advantages and disadvantages of program analysis in contrast to questionnaires. Future developments and challenges will be sketched in the conclusion. Recommendations for the future development of program analysis will be given. URN: urn:nbn:de:0114-fqs0801379

  19. Single-shell tank retrieval program mission analysis report

    International Nuclear Information System (INIS)

    Stokes, W.J.

    1998-01-01

    This Mission Analysis Report was prepared to provide the foundation for the Single-Shell Tank (SST) Retrieval Program, a new program responsible for waste removal for the SSTS. The SST Retrieval Program is integrated with other Tank Waste Remediation System activities that provide the management, technical, and operations elements associated with planning and execution of SST and SST Farm retrieval and closure. This Mission Analysis Report provides the basis and strategy for developing a program plan for SST retrieval. This Mission Analysis Report responds to a US Department of Energy request for an alternative single-shell tank retrieval approach (Taylor 1997)

  20. Single-shell tank retrieval program mission analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Stokes, W.J.

    1998-08-11

    This Mission Analysis Report was prepared to provide the foundation for the Single-Shell Tank (SST) Retrieval Program, a new program responsible for waste removal for the SSTS. The SST Retrieval Program is integrated with other Tank Waste Remediation System activities that provide the management, technical, and operations elements associated with planning and execution of SST and SST Farm retrieval and closure. This Mission Analysis Report provides the basis and strategy for developing a program plan for SST retrieval. This Mission Analysis Report responds to a US Department of Energy request for an alternative single-shell tank retrieval approach (Taylor 1997).

  1. Understanding valve program complexity in a refurbishment environment - learning from the past

    International Nuclear Information System (INIS)

    Roth, H.E.

    2012-01-01

    The complexity of Valve Program development, planning, execution and management in a refurbishment environment is an enormous undertaking requiring the proper coordination and integration of many moving parts. As such, lack of attention and understanding of this complexity has led to significant cost and schedule overruns in past refurbishment projects in the province. OPEX indicates the challenges in completing valve scope during refurbishments are related but not limited to; lack of detailed condition assessments, improper scope development, insignificant strategic approach to work task planning, scheduling and procurement, absence of contingency planning for common ‘as found’ conditions during execution, lack of proper training requirements, etc. In addition, past contracting strategies to employ numerous companies in collaboration to complete such a complex and specialized program, has resulted in further complications surrounding the management and integration of multiple quality programs and internal company processes. Finally, the aftermath of such fragmented projects results in an absolute closeout nightmare, often times taking years to locate, sift through and re-integrate pertinent information back into customer systems. Valve Program complexity cannot be understood by just anyone, only those that have lived through a refurbishment project and experienced the challenges mentioned above have the knowledge, skill, and ability to appreciate how to tactically apply past learning to realize future improvements. Furthermore, effective contractor-customer collaboration is crucial; true and in-depth knowledge and understanding of the customer quality programs, engineering and work management processes, configuration management requirements, and most importantly the imperative significance of nuclear safety, are all essential components to ensure overall alignment and program success. (author)

  2. Understanding valve program complexity in a refurbishment environment - learning from the past

    Energy Technology Data Exchange (ETDEWEB)

    Roth, H.E. [Babcock & Wilcox Canada Ltd., Cambridge, Ontario (Canada)

    2012-07-01

    The complexity of Valve Program development, planning, execution and management in a refurbishment environment is an enormous undertaking requiring the proper coordination and integration of many moving parts. As such, lack of attention and understanding of this complexity has led to significant cost and schedule overruns in past refurbishment projects in the province. OPEX indicates the challenges in completing valve scope during refurbishments are related but not limited to; lack of detailed condition assessments, improper scope development, insignificant strategic approach to work task planning, scheduling and procurement, absence of contingency planning for common ‘as found’ conditions during execution, lack of proper training requirements, etc. In addition, past contracting strategies to employ numerous companies in collaboration to complete such a complex and specialized program, has resulted in further complications surrounding the management and integration of multiple quality programs and internal company processes. Finally, the aftermath of such fragmented projects results in an absolute closeout nightmare, often times taking years to locate, sift through and re-integrate pertinent information back into customer systems. Valve Program complexity cannot be understood by just anyone, only those that have lived through a refurbishment project and experienced the challenges mentioned above have the knowledge, skill, and ability to appreciate how to tactically apply past learning to realize future improvements. Furthermore, effective contractor-customer collaboration is crucial; true and in-depth knowledge and understanding of the customer quality programs, engineering and work management processes, configuration management requirements, and most importantly the imperative significance of nuclear safety, are all essential components to ensure overall alignment and program success. (author)

  3. Technical Analysis Program / Flight Standards Automation System -

    Data.gov (United States)

    Department of Transportation — 1-TAP is a national data quality application 2-Logbook is field office tracking and suspense program for investigation tracking and certification tracking 3-Numerous...

  4. An Analysis of Naval Officer Accession Programs

    National Research Council Canada - National Science Library

    Lehner, William D

    2008-01-01

    This thesis conducts an extensive literature review of prior studies on the three major commissioning programs for United States naval officers the United States Naval Academy, Naval Reserve Officers...

  5. An Interactive Learning Environment for Teaching the Imperative and Object-Oriented Programming Techniques in Various Learning Contexts

    Science.gov (United States)

    Xinogalos, Stelios

    The acquisition of problem-solving and programming skills in the era of knowledge society seems to be particularly important. Due to the intrinsic difficulty of acquiring such skills various educational tools have been developed. Unfortunately, most of these tools are not utilized. In this paper we present the programming microworlds Karel and objectKarel that support the procedural-imperative and Object-Oriented Programming (OOP) techniques and can be used for supporting the teaching and learning of programming in various learning contexts and audiences. The paper focuses on presenting the pedagogical features that are common to both environments and mainly on presenting the potential uses of these environments.

  6. An Overview of NASA's Integrated Design and Engineering Analysis (IDEA) Environment

    Science.gov (United States)

    Robinson, Jeffrey S.

    2011-01-01

    Historically, the design of subsonic and supersonic aircraft has been divided into separate technical disciplines (such as propulsion, aerodynamics and structures), each of which performs design and analysis in relative isolation from others. This is possible, in most cases, either because the amount of interdisciplinary coupling is minimal, or because the interactions can be treated as linear. The design of hypersonic airbreathing vehicles, like NASA's X-43, is quite the opposite. Such systems are dominated by strong non-linear interactions between disciplines. The design of these systems demands that a multi-disciplinary approach be taken. Furthermore, increased analytical fidelity at the conceptual design phase is highly desirable, as many of the non-linearities are not captured by lower fidelity tools. Only when these systems are designed from a true multi-disciplinary perspective, can the real performance benefits be achieved and complete vehicle systems be fielded. Toward this end, the Vehicle Analysis Branch at NASA Langley Research Center has been developing the Integrated Design and Engineering Analysis (IDEA) Environment. IDEA is a collaborative environment for parametrically modeling conceptual and preliminary designs for launch vehicle and high speed atmospheric flight configurations using the Adaptive Modeling Language (AML) as the underlying framework. The environment integrates geometry, packaging, propulsion, trajectory, aerodynamics, aerothermodynamics, engine and airframe subsystem design, thermal and structural analysis, and vehicle closure into a generative, parametric, unified computational model where data is shared seamlessly between the different disciplines. Plans are also in place to incorporate life cycle analysis tools into the environment which will estimate vehicle operability, reliability and cost. IDEA is currently being funded by NASA?s Hypersonics Project, a part of the Fundamental Aeronautics Program within the Aeronautics

  7. Overview of the Space Launch System Ascent Aeroacoustic Environment Test Program

    Science.gov (United States)

    Herron, Andrew J.; Crosby, William A.; Reed, Darren K.

    2016-01-01

    Characterization of accurate flight vehicle unsteady aerodynamics is critical for component and secondary structure vibroacoustic design. The Aerosciences Branch at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center has conducted a test at the NASA Ames Research Center (ARC) Unitary Plan Wind Tunnels (UPWT) to determine such ascent aeroacoustic environments for the Space Launch System (SLS). Surface static pressure measurements were also collected to aid in determination of local environments for venting, CFD substantiation, and calibration of the flush air data system located on the launch abort system. Additionally, this test supported a NASA Engineering and Safety Center study of alternate booster nose caps. Testing occurred during two test campaigns: August - September 2013 and December 2013 - January 2014. Four primary model configurations were tested for ascent aeroacoustic environment definition. The SLS Block 1 vehicle was represented by a 2.5% full stack model and a 4% truncated model. Preliminary Block 1B payload and manned configurations were also tested, using 2.5% full stack and 4% truncated models respectively. This test utilized the 11 x 11 foot transonic and 9 x 7 foot supersonic tunnel sections at the ARC UPWT to collect data from Mach 0.7 through 2.5 at various total angles of attack. SLS Block 1 design environments were developed primarily using these data. SLS Block 1B preliminary environments have also been prepared using these data. This paper discusses the test and analysis methodology utilized, with a focus on the unsteady data collection and processing.

  8. Assessment of Changes in School Nutrition Programs and the School Environment as a Result of Following the HealthierUS School Challenge Program

    Science.gov (United States)

    Brown, Jennifer S.; Bednar, Carolyn; DiMarco, Nancy M.; Connors, Priscilla L.

    2012-01-01

    Purpose/Objectives: The purpose of this study was to determine changes in school nutrition programs and the school environment as reported by school nutrition directors who are following the U.S. Department of Agriculture's HealthierUS School Challenge (HUSSC) program. The objective was to determine before and after changes in the average lunch…

  9. Costs to implement an effective transition-to-parenthood program for couples: Analysis of the Family Foundations program

    Science.gov (United States)

    Jones, Damon E.; Feinberg, Mark E.; Hostetler, Michelle

    2014-01-01

    The transition to parenthood involves many stressors that can have implications for the couple relationship as well as the developmental environment of the child. Scholars and policymakers have recognized the potential for interventions that can help couples navigate these stressors to improve parenting and coparenting strategies. Such evidence-based programs are scarcely available, however, and little is known about the resources necessary to carry out these programs. This study examines the costs and resources necessary to implement Family Foundations, a program that addresses the multifaceted issues facing first-time parents through a series of pre- and post-natal classes. Costs were determined using a 6-step analytic process and are based on the first implementation of the program carried out through a five-year demonstration project. This assessment demonstrates how overall costs change across years as new cohorts of families are introduced, and how cost breakdowns differ by category as needs shift from training group leaders to sustaining program services. Information from this cost analysis helps clarify how the program could be made more efficient in subsequent implementations. We also consider how results may be used in future research examining economic benefits of participation in the program. PMID:24603052

  10. Costs to implement an effective transition-to-parenthood program for couples: analysis of the Family Foundations program.

    Science.gov (United States)

    Jones, Damon E; Feinberg, Mark E; Hostetler, Michelle L

    2014-06-01

    The transition to parenthood involves many stressors that can have implications for the couple relationship as well as the developmental environment of the child. Scholars and policymakers have recognized the potential for interventions that can help couples navigate these stressors to improve parenting and coparenting strategies. Such evidence-based programs are scarcely available, however, and little is known about the resources necessary to carry out these programs. This study examines the costs and resources necessary to implement Family Foundations, a program that addresses the multifaceted issues facing first-time parents through a series of pre- and post-natal classes. Costs were determined using a 6-step analytic process and are based on the first implementation of the program carried out through a five-year demonstration project. This assessment demonstrates how overall costs change across years as new cohorts of families are introduced, and how cost breakdowns differ by category as needs shift from training group leaders to sustaining program services. Information from this cost analysis helps clarify how the program could be made more efficient in subsequent implementations. We also consider how results may be used in future research examining economic benefits of participation in the program. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. New computing systems, future computing environment, and their implications on structural analysis and design

    Science.gov (United States)

    Noor, Ahmed K.; Housner, Jerrold M.

    1993-01-01

    Recent advances in computer technology that are likely to impact structural analysis and design of flight vehicles are reviewed. A brief summary is given of the advances in microelectronics, networking technologies, and in the user-interface hardware and software. The major features of new and projected computing systems, including high performance computers, parallel processing machines, and small systems, are described. Advances in programming environments, numerical algorithms, and computational strategies for new computing systems are reviewed. The impact of the advances in computer technology on structural analysis and the design of flight vehicles is described. A scenario for future computing paradigms is presented, and the near-term needs in the computational structures area are outlined.

  12. Evaluation of genotype x environment interactions in maize hybrids using GGE biplot analysis

    Directory of Open Access Journals (Sweden)

    Fatma Aykut Tonk

    2011-01-01

    Full Text Available Seventeen hybrid maize genotypes were evaluated at four different locations in 2005 and 2006 cropping seasonsunder irrigated conditions in Turkey. The analysis of variance showed that mean squares of environments (E, genotypes (G andGE interactions (GEI were highly significant and accounted for 74, 7 and 19 % of treatment combination sum squares, respectively.To determine the effects of GEI on grain yield, the data were subjected to the GGE biplot analysis. Maize hybrid G16 can be proposedas reliably growing in test locations for high grain yield. Also, only the Yenisehir location could be best representative of overalllocations for deciding about which experimental hybrids can be recommended for grain yield in this study. Consequently, using ofgrain yield per plant instead of grain yield per plot in hybrid maize breeding programs could be preferred by private companies dueto some advantages.

  13. Energy and environment efficiency analysis based on an improved environment DEA cross-model: Case study of complex chemical processes

    International Nuclear Information System (INIS)

    Geng, ZhiQiang; Dong, JunGen; Han, YongMing; Zhu, QunXiong

    2017-01-01

    Highlights: •An improved environment DEA cross-model method is proposed. •Energy and environment efficiency analysis framework of complex chemical processes is obtained. •This proposed method is efficient in energy-saving and emission reduction of complex chemical processes. -- Abstract: The complex chemical process is a high pollution and high energy consumption industrial process. Therefore, it is very important to analyze and evaluate the energy and environment efficiency of the complex chemical process. Data Envelopment Analysis (DEA) is used to evaluate the relative effectiveness of decision-making units (DMUs). However, the traditional DEA method usually cannot genuinely distinguish the effective and inefficient DMU due to its extreme or unreasonable weight distribution of input and output variables. Therefore, this paper proposes an energy and environment efficiency analysis method based on an improved environment DEA cross-model (DEACM) method. The inputs of the complex chemical process are divided into energy and non-energy inputs. Meanwhile, the outputs are divided into desirable and undesirable outputs. And then the energy and environment performance index (EEPI) based on the cross evaluation is used to represent the overall performance of each DMU. Moreover, the improvement direction of energy-saving and carbon emission reduction of each inefficiency DMU is quantitatively obtained based on the self-evaluation model of the improved environment DEACM. The results show that the improved environment DEACM method has a better effective discrimination than the original DEA method by analyzing the energy and environment efficiency of the ethylene production process in complex chemical processes, and it can obtain the potential of energy-saving and carbon emission reduction of ethylene plants, especially the improvement direction of inefficient DMUs to improve energy efficiency and reduce carbon emission.

  14. Energy analysis program. 1994 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.

    1995-04-01

    This report provides an energy analysis overview. The following topics are described: building energy analysis; urban and energy environmental issues; appliance energy efficiency standards; utility planning and policy; energy efficiency, economics, and policy issues; and international energy and environmental issues.

  15. Effective Analysis of C Programs by Rewriting Variability

    DEFF Research Database (Denmark)

    Iosif-Lazar, Alexandru Florin; Melo, Jean; Dimovski, Aleksandar

    2017-01-01

    and effective analysis and verification of real-world C program families. Importance. We report some interesting variability-related bugs that we discovered using various state-of-the-art single-program C verification tools, such as Frama-C, Clang, LLBMC.......Context. Variability-intensive programs (program families) appear in many application areas and for many reasons today. Different family members, called variants, are derived by switching statically configurable options (features) on and off, while reuse of the common code is maximized. Inquiry....... Verification of program families is challenging since the number of variants is exponential in the number of features. Existing single-program analysis and verification tools cannot be applied directly to program families, and designing and implementing the corresponding variability-aware versions is tedious...

  16. PABLM: a computer program to calculate accumulated radiation doses from radionuclides in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Kennedy, W.E. Jr.; Soldat, J.K.

    1980-03-01

    A computer program, PABLM, was written to facilitate the calculation of internal radiation doses to man from radionuclides in food products and external radiation doses from radionuclides in the environment. This report contains details of mathematical models used and calculational procedures required to run the computer program. Radiation doses from radionuclides in the environment may be calculated from deposition on the soil or plants during an atmospheric or liquid release, or from exposure to residual radionuclides in the environment after the releases have ended. Radioactive decay is considered during the release of radionuclides, after they are deposited on the plants or ground, and during holdup of food after harvest. The radiation dose models consider several exposure pathways. Doses may be calculated for either a maximum-exposed individual or for a population group. The doses calculated are accumulated doses from continuous chronic exposure. A first-year committed dose is calculated as well as an integrated dose for a selected number of years. The equations for calculating internal radiation doses are derived from those given by the International Commission on Radiological Protection (ICRP) for body burdens and MPC's of each radionuclide. The radiation doses from external exposure to contaminated water and soil are calculated using the basic assumption that the contaminated medium is large enough to be considered an infinite volume or plane relative to the range of the emitted radiations. The equations for calculations of the radiation dose from external exposure to shoreline sediments include a correction for the finite width of the contaminated beach.

  17. Programming effort analysis of the ELLPACK language

    Science.gov (United States)

    Rice, J. R.

    1978-01-01

    ELLPACK is a problem statement language and system for elliptic partial differential equations which is implemented by a FORTRAN preprocessor. ELLPACK's principal purpose is as a tool for the performance evaluation of software. However, it is used here as an example with which to study the programming effort required for problem solving. It is obvious that problem statement languages can reduce programming effort tremendously; the goal is to quantify this somewhat. This is done by analyzing the lengths and effort (as measured by Halstead's software science technique) of various approaches to solving these problems.

  18. TRU Waste Management Program. Cost/schedule optimization analysis

    International Nuclear Information System (INIS)

    Detamore, J.A.; Raudenbush, M.H.; Wolaver, R.W.; Hastings, G.A.

    1985-10-01

    This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office Rockwell International (JIO/RI) during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, task monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short-term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. Systems models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions

  19. Shell stability analysis in a computer aided engineering (CAE) environment

    Science.gov (United States)

    Arbocz, J.; Hol, J. M. A. M.

    1993-01-01

    The development of 'DISDECO', the Delft Interactive Shell DEsign COde is described. The purpose of this project is to make the accumulated theoretical, numerical and practical knowledge of the last 25 years or so readily accessible to users interested in the analysis of buckling sensitive structures. With this open ended, hierarchical, interactive computer code the user can access from his workstation successively programs of increasing complexity. The computational modules currently operational in DISDECO provide the prospective user with facilities to calculate the critical buckling loads of stiffened anisotropic shells under combined loading, to investigate the effects the various types of boundary conditions will have on the critical load, and to get a complete picture of the degrading effects the different shapes of possible initial imperfections might cause, all in one interactive session. Once a design is finalized, its collapse load can be verified by running a large refined model remotely from behind the workstation with one of the current generation 2-dimensional codes, with advanced capabilities to handle both geometric and material nonlinearities.

  20. Standarized radiological hazard analysis for a broad based operational safety program

    International Nuclear Information System (INIS)

    Wadman, W.W. III; Andrews, L.L.

    1992-01-01

    The Radiological hazard Analysis (RHA) Manual provides a methodology and detailed guidance for systematic analysis of radiological hazards over a broad spectrum of program functions, housed in a wide variety of facilities. Radiological programs at LANL include: research and experimentation; routine materials operations; production; non-destructive examination or testing; isotope and machine produced radiations; chemistry; and metallurgy. The RHA permits uniform evaluation of hazard types over a range of several orders of magnitude of hazard severity. The results are used to estimate risk, evaluate types and level or resource allocations, identify deficiencies, and plan corrective actions for safe working environments. 2 refs

  1. Standardized radiological hazard analysis for a broad based operational safety program

    International Nuclear Information System (INIS)

    Wadman, W. III; Andrews, L.

    1992-01-01

    The Radiological Hazard Analysis (RHA) Manual provides a methodology and detailed guidance for systematic analysis of radiological hazards over a broad spectrum of program functions, housed in a wide variety of facilities. Radiological programs at LANL include: research and experimentation routine materials operations; production; non-destructive examination or testing; isotope and machine produced radiations; chemistry; and metallurgy. The RHA permits uniform evaluation of hazard types over a range of several orders of magnitude of hazard severity. The results are used to estimate risk, evaluate types and level of resource allocations, identify deficiencies, and plan corrective actions for safe working environments. (author)

  2. Student perception of the educational environment in regular and bridging nursing programs in Saudi Arabia using the Dundee Ready Educational Environment Measure.

    Science.gov (United States)

    Al Nozha, Omar Mansour; Fadel, Hani T

    2017-01-01

    Taibah University offers regular nursing (RNP) and nursing bridging (NBP) bachelor programs. We evaluated student perception of the learning environment as one means of quality assurance. To assess nursing student perception of their educational environment, to compare the perceptions of regular and bridging students, and to compare the perceptions of students in the old and new curricula. Cross-sectional survey. College of Nursing at Taibah University, Madinah, Saudi Arabia. The Dundee Ready Educational Environment Measure (DREEM) instrument was distributed to over 714 nursing students to assess perception of the educational environment. Independent samples t test and Pearson's chi square were used to compare the programs and curricula. The DREEM inventory score. Of 714 students, 271 (38%) were RNP students and 443 (62%) were NBP students. The mean (standard deviation) DREEM score was 111 (25). No significant differences were observed between the programs except for the domain "academic self-perceptions" being higher in RNP students (P .05). Nursing students generally perceived their learning environment as more positive than negative. Regular students were more positive than bridging students. Students who experienced the new curriculum were more positive towards learning. The cross-sectional design and unequal gender and study level distributions may limit generalizability of the results. Longitudinal, large-scale studies with more even distributions of participant characteristics are needed.

  3. Paleomagnetism.org : An online multi-platform open source environment for paleomagnetic data analysis

    NARCIS (Netherlands)

    Koymans, Mathijs R.; Langereis, C.G.; Pastor-Galán, D.; van Hinsbergen, D.J.J.

    2016-01-01

    This contribution provides an overview of Paleomagnetism.org, an open-source, multi-platform online environment for paleomagnetic data analysis. Paleomagnetism.org provides an interactive environment where paleomagnetic data can be interpreted, evaluated, visualized, and exported. The

  4. Status of activities on the inactive uranium mill tailings sites remedial action program. Office of the Assistant Secretary for Environment

    International Nuclear Information System (INIS)

    1981-04-01

    This report on the status of the Office of Environment's program for inactive uranium mill tailings sites is an analysis of the current status and a forecast of future activities of the Office of Environment. The termination date for receipt of information was September 30, 1980. Aerial radiological surveys and detailed ground radiological assessments of properties within the communities in the vicinity of the designated processing sites in Canonsburg, Pennsylvania, Salt Lake City, Utah, and Boise, Idaho led to the designation of an initial group of vicinity properties for remedial action. The potential health effects of the residual radioactive materials on or near these properties were estimated, and the Assistant Secretary for Environment recommended priorities for performing remedial action to the Department's Assistant Secretary for Nuclear Energy. In designating these properties and establishing recommended priorities for performing remedial action, the Office of Environment consulted with the Environmental Protection Agency, the Nuclear Regulatory Commission, representatives from the affected State and local governments, and individual property owners. After notifying the Governors of each of the affected States and the Navajo Nation of the Secretary of Energy's designation of processing sites within their areas of jurisdiction and establishment of remedial action priorities, a Sample Cooperative Agreement was developed by the Department in consultation with the Nuclear Regulatory Commission and provided to the affected States and the Navajo Nation for comments. During September 1980, a Cooperative Agreement with the Commonwealth of Pennsylvania for the designated Canonsburg processing site was executed by the Department. It is anticipated that a Cooperative Agreement between the State of Utah and the Department to perform remedial actions at the designated Salt Lake City site will be executed in the near future

  5. Status of activities on the inactive uranium mill tailings sites remedial action program. Office of the Assistant Secretary for Environment

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    This report on the status of the Office of Environment's program for inactive uranium mill tailings sites is an analysis of the current status and a forecast of future activities of the Office of Environment. The termination date for receipt of information was September 30, 1980. Aerial radiological surveys and detailed ground radiological assessments of properties within the communities in the vicinity of the designated processing sites in Canonsburg, Pennsylvania, Salt Lake City, Utah, and Boise, Idaho led to the designation of an initial group of vicinity properties for remedial action. The potential health effects of the residual radioactive materials on or near these properties were estimated, and the Assistant Secretary for Environment recommended priorities for performing remedial action to the Department's Assistant Secretary for Nuclear Energy. In designating these properties and establishing recommended priorities for performing remedial action, the Office of Environment consulted with the Environmental Protection Agency, the Nuclear Regulatory Commission, representatives from the affected State and local governments, and individual property owners. After notifying the Governors of each of the affected States and the Navajo Nation of the Secretary of Energy's designation of processing sites within their areas of jurisdiction and establishment of remedial action priorities, a Sample Cooperative Agreement was developed by the Department in consultation with the Nuclear Regulatory Commission and provided to the affected States and the Navajo Nation for comments. During September 1980, a Cooperative Agreement with the Commonwealth of Pennsylvania for the designated Canonsburg processing site was executed by the Department. It is anticipated that a Cooperative Agreement between the State of Utah and the Department to perform remedial actions at the designated Salt Lake City site will be executed in the near future.

  6. Transition of a Three-Dimensional Unsteady Viscous Flow Analysis from a Research Environment to the Design Environment

    Science.gov (United States)

    Dorney, Suzanne; Dorney, Daniel J.; Huber, Frank; Sheffler, David A.; Turner, James E. (Technical Monitor)

    2001-01-01

    The advent of advanced computer architectures and parallel computing have led to a revolutionary change in the design process for turbomachinery components. Two- and three-dimensional steady-state computational flow procedures are now routinely used in the early stages of design. Unsteady flow analyses, however, are just beginning to be incorporated into design systems. This paper outlines the transition of a three-dimensional unsteady viscous flow analysis from the research environment into the design environment. The test case used to demonstrate the analysis is the full turbine system (high-pressure turbine, inter-turbine duct and low-pressure turbine) from an advanced turboprop engine.

  7. An economic analysis of leniency programs in antitrust law

    NARCIS (Netherlands)

    Hinloopen, J.

    2003-01-01

    Within a dynamic market environment the forces that drive the effectiveness of leniency programs in antitrust law are analyzed. This effectiveness unambigously is enhanced by (i) increasing the reduction in fine payments in return for reporting a cartel, and (ii) increasing the expected per-period

  8. Automated Program Analysis for Cybersecurity (APAC)

    Science.gov (United States)

    2016-07-14

    report is the result of contracted fundamental research deemed exempt from public affairs security and policy review in accordance with SAF/AQR memorandum...contracted fundamental research deemed exempt from public affairs security and policy review in accordance with SAF/AQR memorandum dated 10 Dec 08 and...program was to measure the effectiveness and efficiency of the R&D teams in detecting malware in Android applications. In order to achieve this goal

  9. Environment

    International Nuclear Information System (INIS)

    McIntyre, A.D.; Turnbull, R.G.H.

    1992-01-01

    The development of the hydrocarbon resources of the North Sea has resulted in both offshore and onshore environmental repercussions, involving the existing physical attributes of the sea and seabed, the coastline and adjoining land. The social and economic repercussions of the industry were equally widespread. The dramatic and speedy impact of the exploration and exploitation of the northern North Sea resources in the early 1970s, on the physical resources of Scotland was quickly realised together with the concern that any environmental and social damage to the physical and social fabric should be kept to a minimum. To this end, a wide range of research and other activities by central and local government, and other interested agencies was undertaken to extend existing knowledge on the marine and terrestrial environments that might be affected by the oil and gas industry. The outcome of these activities is summarized in this paper. The topics covered include a survey of the marine ecosystems of the North Sea, the fishing industry, the impact of oil pollution on seabirds and fish stocks, the ecology of the Scottish coastline and the impact of the petroleum industry on a selection of particular sites. (author)

  10. Nursing students' perceptions of their educational environment in the bachelor's programs of the Shifa College of Nursing, Pakistan.

    Science.gov (United States)

    Victor, Gideon; Ishtiaq, Muhammad; Parveen, Subia

    2017-01-01

    The objective of this study was to evaluate nursing students' perceptions of their educational environment in a private college. Perceptions were compared between genders and 2 bachelor's programs. A total of 219 students participated in this study, drawn from the Generic Bachelor of Science in Nursing (GBSN) and the Post-Registered Nurse Bachelor of Science in Nursing (PRBSN) programs of the Shifa College of Nursing, Islamabad, Pakistan. The Dundee Ready Education Environment Measure was utilized for data collection. Descriptive statistics were used to calculate total scores, as well as means and standard deviations, and the t-test was applied for comparisons according to program and gender. The overall total mean score (119 of 200) is suggestive of more positive than negative perceptions of the educational environment. The mean score of 13 of 28 on the social self-perception subscale suggests that the social environment was felt to be 'not a nice place.' The t-test revealed more positive perceptions among students enrolled in the PRBSN program (Pnursing students. Both positive and negative perceptions were reported; the overall sense of a positive environment was present, but the social component requires immediate attention, along with other unsatisfactory components. Establishing a supportive environment conducive to competence-based learning would play an important role in bringing desirable changes to the educational environment.

  11. Using the Language Environment Analysis (LENA) system in preschool classrooms with children with autism spectrum disorders.

    Science.gov (United States)

    Dykstra, Jessica R; Sabatos-Devito, Maura G; Irvin, Dwight W; Boyd, Brian A; Hume, Kara A; Odom, Sam L

    2013-09-01

    This study describes the language environment of preschool programs serving children with autism spectrum disorders (ASDs) and examines relationships between child characteristics and an automated measure of adult and child language in the classroom. The Language Environment Analysis (LENA) system was used with 40 children with ASD to collect data on adult and child language. Standardized assessments were administered to obtain language, cognitive, and autism severity scores for participants. With a mean of over 5 hours of recording across two days several months apart, there was a mean of 3.6 child vocalizations per minute, 1.0 conversational turns (in which either the adult or child respond to the other within 5 seconds) per minute, and 29.2 adult words per minute. Two of the three LENA variables were significantly correlated with language age-equivalents. Cognitive age-equivalents were also significantly correlated with two LENA variables. Autism Diagnostic Observation Schedule severity scores and LENA variables were not significantly correlated. Implications for using the LENA system with children with ASD in the school environment are discussed.

  12. Novel 3D/VR interactive environment for MD simulations, visualization and analysis.

    Science.gov (United States)

    Doblack, Benjamin N; Allis, Tim; Dávila, Lilian P

    2014-12-18

    The increasing development of computing (hardware and software) in the last decades has impacted scientific research in many fields including materials science, biology, chemistry and physics among many others. A new computational system for the accurate and fast simulation and 3D/VR visualization of nanostructures is presented here, using the open-source molecular dynamics (MD) computer program LAMMPS. This alternative computational method uses modern graphics processors, NVIDIA CUDA technology and specialized scientific codes to overcome processing speed barriers common to traditional computing methods. In conjunction with a virtual reality system used to model materials, this enhancement allows the addition of accelerated MD simulation capability. The motivation is to provide a novel research environment which simultaneously allows visualization, simulation, modeling and analysis. The research goal is to investigate the structure and properties of inorganic nanostructures (e.g., silica glass nanosprings) under different conditions using this innovative computational system. The work presented outlines a description of the 3D/VR Visualization System and basic components, an overview of important considerations such as the physical environment, details on the setup and use of the novel system, a general procedure for the accelerated MD enhancement, technical information, and relevant remarks. The impact of this work is the creation of a unique computational system combining nanoscale materials simulation, visualization and interactivity in a virtual environment, which is both a research and teaching instrument at UC Merced.

  13. Pointer Analysis for JavaScript Programming Tools

    DEFF Research Database (Denmark)

    Feldthaus, Asger

    Tools that can assist the programmer with tasks, such as, refactoring or code navigation, have proven popular for Java, C#, and other programming languages. JavaScript is a widely used programming language, and its users could likewise benefit from such tools, but the dynamic nature of the language...... is an obstacle for the development of these. Because of this, tools for JavaScript have long remained ineffective compared to those for many other programming languages. Static pointer analysis can provide a foundation for more powerful tools, although the design of this analysis is itself a complicated endeavor....... In this work, we explore techniques for performing pointer analysis of JavaScript programs, and we find novel applications of these techniques. In particular, we demonstrate how these can be used for code navigation, automatic refactoring, semi-automatic refactoring of incomplete programs, and checking of type...

  14. Teaching Millennials to Engage THE Environment Instead of Their Environment: A Pedagogical Analysis

    Science.gov (United States)

    Stevens, J. Richard; Crow, Deserai Anderson

    2016-01-01

    This article examines the difficulty in teaching contemporary students of journalism (those in the much-discussed Millennial Generation) to report on complex topics like science and the environment. After examining contemporary literature, the authors subjected 120 undergraduate students to a strategy that combined visual representations of…

  15. Gas quality analysis and evaluation program for project Gasbuggy

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C F [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-01

    Experimental results of the gas quality analysis program for Project Gasbuggy through August 1969 are presented graphically, addressing the questions raised by the preshot program goals. The chemical composition and the concentrations of tritium, krypton-85, carbon-14 and argon-37, 39 are presented as a function of time and gas production from the nuclear chimney. Chemically, the presence of CO{sub 2}, CO and H{sub 2} served to dilute the formation gas and caused reactions which significantly altered the gas composition at early times. The radionuclide content of the chimney gas at reentry was some 800 pCi/cm{sup 3} of which about 80% was CH{sub 3}T. Lesser quantities of tritium were observed as HT, C{sub 2}H{sub 5}T and C{sub 3}H{sub 7}T. The other major contaminant was Kr{sup 85} which was present at about one-fifth the level of CH{sub 3}T. Small quantities of carbon-14 and argon-39 were also identified. The only other radionuclides identified in the gas were relatively short-lived rare gases. During the production testing, about two and one-half chimney volumes of gas at formation pressure were removed. This removal, accompanied by dilution, has reduced the radionuclide concentrations to about 7% of their levels at reentry. The production characteristics of the Gasbuggy environment prevented an adequate test of the effectiveness of chimney flushing. However, the rapid drawdown concept is supported by the available data as an effective means of reducing contaminant levels. The changes in composition during production or testing are seen to be consistent with a model involving a non-uniform gas influx rate and flow distribution over the chimney region. Mixing times are estimated to be on the order of a few days, so that increasing concentrations following a sudden gas influx can be explained. (author)

  16. Geal: A general program for the analysis of alpha spectra

    International Nuclear Information System (INIS)

    Garcia-Torano, E.; Acena Barrenechea, M.L.

    1978-01-01

    A computing program for analysis and representation of alpha spectra obtained with surface barrier detectors is described. Several methods for fitting spectra are studied. A monoenergetic line or a doublet previously fitted has been used as a standard for the analyses of all kind of spectra. Some examples of application as well as a list of the program are shown. The program has been written in Fortran V language. (author)

  17. 2011 Biomass Program Platform Peer Review: Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Haq, Zia [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2012-02-01

    This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Analysis Platform Review meeting.

  18. Micrometeoroid and Orbital Debris (MMOD) Shield Ballistic Limit Analysis Program

    Science.gov (United States)

    Ryan, Shannon

    2013-01-01

    This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software is programmed in Visual Basic for Applications for installation as a simple add-in for Microsoft Excel. The user is directed to a graphical user interface (GUI) that requires user inputs and provides solutions directly in Microsoft Excel workbooks.

  19. Population Analysis: A Methodology for Understanding Populations in COIN Environments

    National Research Council Canada - National Science Library

    Burke, Mark C; Self, Eric C

    2008-01-01

    .... Our methodology provides a heuristic model, called the "3 x 5 P.I.G.S.P.E.E.R. Model," that can be applied in any environment and will help bridge the gap between strategic theory and tactical implementation...

  20. The Safety Analysis of Shipborne Ammunition in Fire Environment

    Science.gov (United States)

    Ren, Junpeng; Wang, Xudong; Yue, Pengfei

    2017-12-01

    The safety of Ammunition has always been the focus of national military science and technology issues. And fire is one of the major safety threats to the ship’s ammunition storage environment, In this paper, Mk-82 shipborne aviation bomb has been taken as the study object, simulated the whole process of fire by using the FDS (Fire Detection System) software. According to the simulation results of FDS, ANSYS software was used to simulate the temperature field of Mk-82 carrier-based aviation bomb under fire environment, and the safety of aviation bomb in fire environment was analyzed. The result shows that the aviation bombs under the fire environment can occur the combustion or explosion after 70s constant cook-off, and it was a huge threat to the ship security.

  1. Design and analysis of environmental monitoring programs

    DEFF Research Database (Denmark)

    Lophaven, Søren Nymand

    2005-01-01

    This thesis describes statistical methods for modelling space-time phenomena. The methods were applied to data from the Danish marine monitoring program in the Kattegat, measured in the five-year period 1993-1997. The proposed model approaches are characterised as relatively simple methods, which...... into account. Thus, it serves as a compromise between existing methods. The space-time model approaches and geostatistical design methods used in this thesis are generally applicable, i.e. with minor modifications they could equally well be applied within areas such as soil and air pollution. In Danish: Denne...

  2. MULGRES: a computer program for stepwise multiple regression analysis

    Science.gov (United States)

    A. Jeff Martin

    1971-01-01

    MULGRES is a computer program source deck that is designed for multiple regression analysis employing the technique of stepwise deletion in the search for most significant variables. The features of the program, along with inputs and outputs, are briefly described, with a note on machine compatibility.

  3. HAMOC: a computer program for fluid hammer analysis

    International Nuclear Information System (INIS)

    Johnson, H.G.

    1975-12-01

    A computer program has been developed for fluid hammer analysis of piping systems attached to a vessel which has undergone a known rapid pressure transient. The program is based on the characteristics method for solution of the partial differential equations of motion and continuity. Column separation logic is included for situations in which pressures fall to saturation values

  4. FY2015 Analysis of the Teamwork USA Program. Memorandum

    Science.gov (United States)

    Howard, Mark

    2015-01-01

    The Department of Research and Evaluation (DRE) has completed an analysis of the performance of students who participated in the Teamwork USA Program, administered in FY2014 at three District schools. Teamwork USA hopes to improve student achievement at select Title I elementary schools via its Instrumental Music Program grant. This memorandum to…

  5. Statistical analysis of the BOIL program in RSYST-III

    International Nuclear Information System (INIS)

    Beck, W.; Hausch, H.J.

    1978-11-01

    The paper describes a statistical analysis in the RSYST-III program system. Using the example of the BOIL program, it is shown how the effects of inaccurate input data on the output data can be discovered. The existing possibilities of data generation, data handling, and data evaluation are outlined. (orig.) [de

  6. A Computer Program for Short Circuit Analysis of Electric Power ...

    African Journals Online (AJOL)

    The Short Circuit Analysis Program (SCAP) is to be used to assess the composite effects of unbalanced and balanced faults on the overall reliability of electric power system. The program uses the symmetrical components method to compute all phase and sequence quantities for any bus or branch of a given power network ...

  7. Integrated program of using of Probabilistic Safety Analysis in Spain

    International Nuclear Information System (INIS)

    1998-01-01

    Since 25 June 1986, when the CSN (Nuclear Safety Conseil) approve the Integrated Program of Probabilistic Safety Analysis, this program has articulated the main activities of CSN. This document summarize the activities developed during these years and reviews the Integrated programme

  8. 7 CFR 1700.32 - Program Accounting and Regulatory Analysis.

    Science.gov (United States)

    2010-01-01

    ... Administrator with respect to management, information systems, budgets, and other such matters. (a) The... 7 Agriculture 11 2010-01-01 2010-01-01 false Program Accounting and Regulatory Analysis. 1700.32... SERVICE, DEPARTMENT OF AGRICULTURE GENERAL INFORMATION Agency Organization and Functions § 1700.32 Program...

  9. Investment Analysis Of Environment Pollution In Educational Institutions

    OpenAIRE

    Mahbub Ullah Miyan; Abdus Salam; Md. Nuruzzaman; Sanjida Naznin

    2015-01-01

    Environment pollution has become one of the biggest concerns for the educational institutions in Bangladesh. Thinking not yet starts that environmental pollution has a connection with educational institutions which requires investment. Educational institutions are paying huge amount of money in order to clean the academic atmosphere. Due to unawareness and unconsciousness the environment of the institutions campus continuously polluting in many ways. This paper provides an outline of how diff...

  10. Analysis of anaerobic product properties in fluid and aggressive environments

    OpenAIRE

    Goncharov, A.; Tulinov, A.

    2008-01-01

    The article presents the results of experiments involved in investigation of properties of some domestic and foreign-made anaerobic materials in components and units operating in fluid and aggressive environments. These experiments determined the strength and swell values of anaerobic products in the sea water, fuel and oil, and confirmed their anticorrosion properties. The experiments demonstrated high resistance of anaerobic products to various fluids and aggressive environments, which make...

  11. The concept 'environment' in exergy analysis Some special cases

    International Nuclear Information System (INIS)

    Serova, E.N.; Brodianski, V.M.

    2004-01-01

    The concept 'environment' is of considerable importance in present-day engineering thermodynamics. Introduction of this concept in operation brings not only simplification of the methods of solving classical thermodynamic problems, but also gives the exergy method which forms the major new part of thermodynamics, including some parts of biology, economics and other fields of science. But practice shows that it is necessary to define the concept 'environment' more precisely in some cases

  12. Conceptual apparatus of analysis of the national economy institutional environment

    OpenAIRE

    Ляховець, О. О.

    2017-01-01

    In the paper the sense of the notions «institutional environment», «institutional framework», «institutional structure» is revealed. The difference between these notions is determined. The structural elements of institutional environment classified by the theoretical approaches criterion are considered. The origins of approaches are: 1) the scientific direction of economic theory (institutional economics, neoinstitutionsl economic theory, evolutionary economic theory, political economy); 2) t...

  13. Upper Midwest Gap Analysis Program, Image Processing Protocol

    National Research Council Canada - National Science Library

    Lillesand, Thomas

    1998-01-01

    This document presents a series of technical guidelines by which land cover information is being extracted from Landsat Thematic Mapper data as part of the Upper Midwest Gap Analysis Program (UMGAP...

  14. An economic analysis methodology for project evaluation and programming.

    Science.gov (United States)

    2013-08-01

    Economic analysis is a critical component of a comprehensive project or program evaluation methodology that considers all key : quantitative and qualitative impacts of highway investments. It allows highway agencies to identify, quantify, and value t...

  15. Generalized Aliasing as a Basis for Program Analysis Tools

    National Research Council Canada - National Science Library

    O'Callahan, Robert

    2000-01-01

    .... This dissertation describes the design of a system, Ajax, that addresses this problem by using semantics-based program analysis as the basis for a number of different tools to aid Java programmers...

  16. Analysis of Defense Industry Consolidation Effects on Program Acquisition Costs

    National Research Council Canada - National Science Library

    Hoff, Russell V

    2007-01-01

    .... This thesis examines whether cost changes are evident following consolidation within the defense industry by conducting a regression analysis of Major Defense Acquisition Programs across 13 broad defense market sectors...

  17. Analysis and Implement of Broadcast Program Monitoring Data

    Directory of Open Access Journals (Sweden)

    Song Jin Bao

    2016-01-01

    Full Text Available With the rapid development of the radio and TV industry and the implementation of INT (the integration of telecommunications networks, cable TV networks and the Internet, the contents of programs and advertisements is showing massive, live and interactive trends. In order to meet the security of radio and television, the broadcast of information have to be controlled and administered. In order to master the latest information of public opinion trends through radio and television network, it is necessary research the specific industry applications of broadcast program monitoring. In this paper, the importance of broadcast monitoring in public opinion analysis is firstly analysed. The monitoring radio and television programs broadcast system architecture is proposed combining with the practice, focusing on the technical requirements and implementation process of program broadcast, advertisement broadcast and TV station broadcast monitoring. The more efficient information is generated through statistical analysis, which provides data analysis for radio and television public opinion analysis.

  18. Vulnerability and Risk Analysis Program: Overview of Assessment Methodology

    National Research Council Canada - National Science Library

    2001-01-01

    .... Over the last three years, a team of national laboratory experts, working in partnership with the energy industry, has successfully applied the methodology as part of OCIP's Vulnerability and Risk Analysis Program (VRAP...

  19. Time Aquatic Resources Modeling and Analysis Program (STARMAP)

    Data.gov (United States)

    Federal Laboratory Consortium — Colorado State University has received funding from the U.S. Environmental Protection Agency (EPA) for its Space-Time Aquatic Resources Modeling and Analysis Program...

  20. QUEST/Ada (Query Utility Environment for Software Testing of Ada): The development of a prgram analysis environment for Ada, task 1, phase 2

    Science.gov (United States)

    Brown, David B.

    1990-01-01

    The results of research and development efforts are described for Task one, Phase two of a general project entitled The Development of a Program Analysis Environment for Ada. The scope of this task includes the design and development of a prototype system for testing Ada software modules at the unit level. The system is called Query Utility Environment for Software Testing of Ada (QUEST/Ada). The prototype for condition coverage provides a platform that implements expert system interaction with program testing. The expert system can modify data in the instrument source code in order to achieve coverage goals. Given this initial prototype, it is possible to evaluate the rule base in order to develop improved rules for test case generation. The goals of Phase two are the following: (1) to continue to develop and improve the current user interface to support the other goals of this research effort (i.e., those related to improved testing efficiency and increased code reliable); (2) to develop and empirically evaluate a succession of alternative rule bases for the test case generator such that the expert system achieves coverage in a more efficient manner; and (3) to extend the concepts of the current test environment to address the issues of Ada concurrency.

  1. Integrated Data Collection Analysis (IDCA) Program - Statistical Analysis of RDX Standard Data Sets

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pollard, Colin J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Phillips, Jason J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Air Force Research Lab. (AFRL), Tyndall AFB, FL (United States); Reyes, Jose A. [Applied Research Associates, Tyndall AFB, FL (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-30

    The Integrated Data Collection Analysis (IDCA) program is conducting a Proficiency Test for Small- Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are statistical analyses of the results for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of the RDX Type II Class 5 standard. The material was tested as a well-characterized standard several times during the proficiency study to assess differences among participants and the range of results that may arise for well-behaved explosive materials. The analyses show that there are detectable differences among the results from IDCA participants. While these differences are statistically significant, most of them can be disregarded for comparison purposes to assess potential variability when laboratories attempt to measure identical samples using methods assumed to be nominally the same. The results presented in this report include the average sensitivity results for the IDCA participants and the ranges of values obtained. The ranges represent variation about the mean values of the tests of between 26% and 42%. The magnitude of this variation is attributed to differences in operator, method, and environment as well as the use of different instruments that are also of varying age. The results appear to be a good representation of the broader safety testing community based on the range of methods, instruments, and environments included in the IDCA Proficiency Test.

  2. Synthetic environments

    Science.gov (United States)

    Lukes, George E.; Cain, Joel M.

    1996-02-01

    The Advanced Distributed Simulation (ADS) Synthetic Environments Program seeks to create robust virtual worlds from operational terrain and environmental data sources of sufficient fidelity and currency to interact with the real world. While some applications can be met by direct exploitation of standard digital terrain data, more demanding applications -- particularly those support operations 'close to the ground' -- are well-served by emerging capabilities for 'value-adding' by the user working with controlled imagery. For users to rigorously refine and exploit controlled imagery within functionally different workstations they must have a shared framework to allow interoperability within and between these environments in terms of passing image and object coordinates and other information using a variety of validated sensor models. The Synthetic Environments Program is now being expanded to address rapid construction of virtual worlds with research initiatives in digital mapping, softcopy workstations, and cartographic image understanding. The Synthetic Environments Program is also participating in a joint initiative for a sensor model applications programer's interface (API) to ensure that a common controlled imagery exploitation framework is available to all researchers, developers and users. This presentation provides an introduction to ADS and the associated requirements for synthetic environments to support synthetic theaters of war. It provides a technical rationale for exploring applications of image understanding technology to automated cartography in support of ADS and related programs benefitting from automated analysis of mapping, earth resources and reconnaissance imagery. And it provides an overview and status of the joint initiative for a sensor model API.

  3. A general numerical analysis program for the superconducting quasiparticle mixer

    Science.gov (United States)

    Hicks, R. G.; Feldman, M. J.; Kerr, A. R.

    1986-01-01

    A user-oriented computer program SISCAP (SIS Computer Analysis Program) for analyzing SIS mixers is described. The program allows arbitrary impedance terminations to be specified at all LO harmonics and sideband frequencies. It is therefore able to treat a much more general class of SIS mixers than the widely used three-frequency analysis, for which the harmonics are assumed to be short-circuited. An additional program, GETCHI, provides the necessary input data to program SISCAP. The SISCAP program performs a nonlinear analysis to determine the SIS junction voltage waveform produced by the local oscillator. The quantum theory of mixing is used in its most general form, treating the large signal properties of the mixer in the time domain. A small signal linear analysis is then used to find the conversion loss and port impedances. The noise analysis includes thermal noise from the termination resistances and shot noise from the periodic LO current. Quantum noise is not considered. Many aspects of the program have been adequately verified and found accurate.

  4. Scientific Visualization for Atmospheric Data Analysis in Collaborative Virtual Environments

    Science.gov (United States)

    Engelke, Wito; Flatken, Markus; Garcia, Arturo S.; Bar, Christian; Gerndt, Andreas

    2016-04-01

    1 INTRODUCTION The three year European research project CROSS DRIVE (Collaborative Rover Operations and Planetary Science Analysis System based on Distributed Remote and Interactive Virtual Environments) started in January 2014. The research and development within this project is motivated by three use case studies: landing site characterization, atmospheric science and rover target selection [1]. Currently the implementation for the second use case is in its final phase [2]. Here, the requirements were generated based on the domain experts input and lead to development and integration of appropriate methods for visualization and analysis of atmospheric data. The methods range from volume rendering, interactive slicing, iso-surface techniques to interactive probing. All visualization methods are integrated in DLR's Terrain Rendering application. With this, the high resolution surface data visualization can be enriched with additional methods appropriate for atmospheric data sets. This results in an integrated virtual environment where the scientist has the possibility to interactively explore his data sets directly within the correct context. The data sets include volumetric data of the martian atmosphere, precomputed two dimensional maps and vertical profiles. In most cases the surface data as well as the atmospheric data has global coverage and is of time dependent nature. Furthermore, all interaction is synchronized between different connected application instances, allowing for collaborative sessions between distant experts. 2 VISUALIZATION TECHNIQUES Also the application is currently used for visualization of data sets related to Mars the techniques can be used for other data sets as well. Currently the prototype is capable of handling 2 and 2.5D surface data as well as 4D atmospheric data. Specifically, the surface data is presented using an LoD approach which is based on the HEALPix tessellation of a sphere [3, 4, 5] and can handle data sets in the order of

  5. A fast circuit analysis program based on microcomputer

    International Nuclear Information System (INIS)

    Hu Guoji

    1988-01-01

    A fast circuit analysis program (FCAP) is introduced. The program may be used to analyse DC operating point, frequency and transient response of fast circuit. The feature is that the model of active element is not specified. Users may choose one of many equivalent circuits. Written in FORTRAN 77, FCAP can be run on IBM PC and its compatible computers. It can be used as an assistant tool of analysis and design for fast circuits

  6. A program for Warren-Averbach analysis of diffraction data

    International Nuclear Information System (INIS)

    Fan, Zhijian; Chen, Bo; Chen, Xiping

    2009-04-01

    X-ray or neutron diffraction experiment can provide microstructural information of crystalline materials. At the moment without the model of micro-structure, Warren-Averbach analysis is regarded as an important tool. For this purpose, a program of Warren-Averbach analysis has been developed. The pro- gram has nearly all basic functions, it can be conveniently used through a graphic user interface as well. In the end, the efficiency of the program is illustrated by an example of ceria. (authors)

  7. Cost-benefit analysis of FBR program

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, S [Japan Energy Economic Research Inst., Tokyo

    1975-07-01

    In several countries of the world, both financial and human resources are being invested to the development of fast breeder reactors. Quantitative determination of the benefit which will be expected as the reqard to these efforts of research and development - this is the purpose of the present study. It is cost-benefit analysis. The instances of this analysis are given, namely the work in The Institute of Energy Economics in Japan, and also the one by U.S.AEC. The effect of the development of fast breeder reactors is evaluated in this way ; and problems in the analysis method are indicated. These two works in Japan and the U.S. were performed before the so-called oil crisis.

  8. Cost-benefit analysis of FBR program

    International Nuclear Information System (INIS)

    Suzuki, Shinji

    1975-01-01

    In several countries of the world, both financial and human resources are being invested to the development of fast breeder reactors. Quantitative determination of the benefit which will be expected as the reqard to these efforts of research and development - this is the purpose of the present study. It is cost-benefit analysis. The instances of this analysis are given, namely the work in The Institute of Energy Economics in Japan, and also the one by U.S.AEC. The effect of the development of fast breeder reactors is evaluated in this way ; and problems in the analysis method are indicated. These two works in Japan and the U.S. were performed before the so-called oil crisis. (Mori, K.)

  9. Aspects with Program Analysis for Security Policies

    DEFF Research Database (Denmark)

    Yang, Fan

    Enforcing security policies to IT systems, especially for a mobile distributed system, is challenging. As society becomes more IT-savvy, our expectations about security and privacy evolve. This is usually followed by changes in regulation in the form of standards and legislation. In many cases......, small modification of the security requirement might lead to substantial changes in a number of modules within a large mobile distributed system. Indeed, security is a crosscutting concern which can spread to many business modules within a system, and is difficult to be integrated in a modular way....... This dissertation explores the principles of adding challenging security policies to existing systems with great flexibility and modularity. The policies concerned cover both classical access control and explicit information flow policies. We built our solution by combining aspect-oriented programming techniques...

  10. Development of the virtual research environment for analysis, evaluation and prediction of global climate change impacts on the regional environment

    Science.gov (United States)

    Okladnikov, Igor; Gordov, Evgeny; Titov, Alexander; Fazliev, Alexander

    2017-04-01

    Description and the first results of the Russian Science Foundation project "Virtual computational information environment for analysis, evaluation and prediction of the impacts of global climate change on the environment and climate of a selected region" is presented. The project is aimed at development of an Internet-accessible computation and information environment providing unskilled in numerical modelling and software design specialists, decision-makers and stakeholders with reliable and easy-used tools for in-depth statistical analysis of climatic characteristics, and instruments for detailed analysis, assessment and prediction of impacts of global climate change on the environment and climate of the targeted region. In the framework of the project, approaches of "cloud" processing and analysis of large geospatial datasets will be developed on the technical platform of the Russian leading institution involved in research of climate change and its consequences. Anticipated results will create a pathway for development and deployment of thematic international virtual research laboratory focused on interdisciplinary environmental studies. VRE under development will comprise best features and functionality of earlier developed information and computing system CLIMATE (http://climate.scert.ru/), which is widely used in Northern Eurasia environment studies. The Project includes several major directions of research listed below. 1. Preparation of geo-referenced data sets, describing the dynamics of the current and possible future climate and environmental changes in detail. 2. Improvement of methods of analysis of climate change. 3. Enhancing the functionality of the VRE prototype in order to create a convenient and reliable tool for the study of regional social, economic and political consequences of climate change. 4. Using the output of the first three tasks, compilation of the VRE prototype, its validation, preparation of applicable detailed description of

  11. C language program analysis system (CLAS) part 1: graphical user interface (GUI)

    International Nuclear Information System (INIS)

    Bhattacharjee, A.K.; Seby, A.; Sen, Gopa; Dhodapkar, S.D.

    1994-01-01

    CLAS (C Language Program Analysis System) is a reverse engineering tool intended for use in the verification and validation (V and V) phase of software programs developed in the ANSI C language. From the source code, CLAS generates data pertaining to two conceptual models of software programs viz., Entity-Relationship (E-R) model and Control Flow Graphs (CFG) model. Browsing tools within CLAS, make use of this data, to provide different graphical views of the project. Static analysis tools have been developed earlier for analysing assembly language programs. CLAS is a continuation of this work to provide automated support in analysis of ANSI C language programs. CLAS provides an integrated Graphical User Interface (GUI) based environment under which programs can be analysed into the above mentioned models and the analysed data can be viewed using the browsing tools. The GUI of CLAS is implemented using an OPEN LOOK compliant tool kit XVIEW on Sun SPARC IPC workstation running Sun OS 4.1.1 rev. B. This report describes the GUI of CLAS. CLAS is also expected to be useful in other contexts which may involve understanding architecture/structure of already developed C language programs. Such requirements can arise while carrying out activities like code modification, parallelising etc. (author). 5 refs., 13 figs., 1 appendix

  12. Analysis performed in cooperation with the SALE program, (1)

    International Nuclear Information System (INIS)

    Tuboya, Takao; Wada, Yukio; Suzuki, Takeshi

    1978-01-01

    One of the objects of the SALE (Safeguard Analytical Laboratory Evaluation) program is a development of technique in safeguard and accountability. The SALE program was established by the United States Atomic Energy Commission's New Brunswick Laboratory in 1970. Six years later, SALE program has grown into a worldwide quality control program, receiving analysis results from about 60 laboratories that includes 19 non-U.S. laboratories. All laboratories, participating at present or in the past in the SALE program are listed in Table 1. By 1973, the program was expanded to include six different materials; uranium dioxide (UO 2 ), uranyl nitrate (U-NO 3 ), plutonium dioxide (PuO 2 ), plutonium nitrate (Pu-NO 3 ), uranium-plutonium mixed oxides [(Pu,U)O 2 ], and uranium-plutonium mixed nitrates (Pu-U-NO 3 ). PNC has joined in this program in 1975 for the analysis of samples shown in Table 2. SALE program participants analyze, on a bimonthly basis, materials supplied by the New Brunswick Laboratory (NBL) and report measurement results to NBL for evaluation and inclusion in the bimonthly reports. Present paper describes analysis result and evaluations for these samples which were measured in 1975 -- 1976. (author)

  13. Energy and Environment. Background report for a program for actions, Miljoe '93

    International Nuclear Information System (INIS)

    Bernegaard, L.; Froste, H.; Timm, B.; Simonsson, C.; Brinkman, I.

    1993-06-01

    The report describes the environmental responsibilities of the energy sector, the present and probable future developments of the sector in relation to the defined environmental goals, and suggests areas for continued efforts. The analysis is based on the common European programs and on other international agreements. The development of the swedish energy sector is mainly influenced by the decisions to phase-out nuclear power, not to exploit the remaining unexploited rivers for hydroelectric power and to stabilize and, in a long perspective, reduce the emissions of CO 2 . 39 refs, 5 figs, 38 tabs

  14. Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program. Volume 1, Introduction

    International Nuclear Information System (INIS)

    1994-09-01

    As part of the Environmental Restoration Program at Martin Marietta, IEM (Information Engineering Methodology) was developed as part of a complete and integrated approach to the progressive development and subsequent maintenance of automated data sharing systems. This approach is centered around the organization's objectives, inherent data relationships and business practices. IEM provides the Information Systems community with a tool kit of disciplined techniques supported by automated tools. It includes seven stages: Information Strategy Planning; Business Area Analysis; Business System Design; Technical Design; Construction; Transition; Production

  15. Cyanides in the environment-analysis-problems and challenges.

    Science.gov (United States)

    Jaszczak, Ewa; Polkowska, Żaneta; Narkowicz, Sylwia; Namieśnik, Jacek

    2017-07-01

    Cyanide toxicity and their environmental impact are well known. Nevertheless, they are still used in the mining, galvanic and chemical industries. As a result of industrial activities, cyanides are released in various forms to all elements of the environment. In a natural environment, cyanide exists as cyanogenic glycosides in plants seeds. Too much consumption can cause unpleasant side effects. However, environmental tobacco smoke (ETS) is the most common source of cyanide. Live organisms have the ability to convert cyanide into less toxic compounds excreted with physiological fluids. The aim of this paper is to review the current state of knowledge on the behaviour of cyanide in the environment and its impact on the health and human life.

  16. Validation of the TEXSAN thermal-hydraulic analysis program

    International Nuclear Information System (INIS)

    Burns, S.P.; Klein, D.E.

    1992-01-01

    The TEXSAN thermal-hydraulic analysis program has been developed by the University of Texas at Austin (UT) to simulate buoyancy driven fluid flow and heat transfer in spent fuel and high level nuclear waste (HLW) shipping applications. As part of the TEXSAN software quality assurance program, the software has been subjected to a series of test cases intended to validate its capabilities. The validation tests include many physical phenomena which arise in spent fuel and HLW shipping applications. This paper describes some of the principal results of the TEXSAN validation tests and compares them to solutions available in the open literature. The TEXSAN validation effort has shown that the TEXSAN program is stable and consistent under a range of operating conditions and provides accuracy comparable with other heat transfer programs and evaluation techniques. The modeling capabilities and the interactive user interface employed by the TEXSAN program should make it a useful tool in HLW transportation analysis

  17. Residual energy applications program systems analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Yngve, P.W.

    1980-10-01

    Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

  18. A linear goal programming model for urban energy-economy-environment interaction

    Energy Technology Data Exchange (ETDEWEB)

    Kambo, N.S.; Handa, B.R. (Indian Inst. of Tech., New Delhi (India). Dept. of Mathematics); Bose, R.K. (Tata Energy Research Inst., New Delhi (India))

    1991-01-01

    This paper provides a comprehensive and systematic analysis of energy and pollution problems interconnected with the economic structure, by using a multi-objective sectoral end-use model for addressing regional energy policy issues. The multi-objective model proposed for the study is a 'linear goal programming (LGP)' technique of analysing a 'reference energy system (RES)' in a framework within which alternative policies and technical strategies may be evaluated. The model so developed has further been tested for the city of Delhi (India) for the period 1985 - 86, and a scenario analysis has been carried out by assuming different policy options. (orig./BWJ).

  19. An Analysis of the Operational Environments of Manufacturing Firms ...

    African Journals Online (AJOL)

    Our efforts in this research have been geared towards analyzing the operational environments of manufacturing firms in Aba, South-East, Nigeria. Specifically, the case study was Manufacturers Association of Nigeria (MAN), Abia chapter. Eight five percent of MAN‟s membership was studied. Percentages and test of ...

  20. Comparison and suitability of genotype by environment analysis ...

    African Journals Online (AJOL)

    Pearl millet (Pennisetum glaucum (L.) R. Br.) is an important food security and income crop for households living in semi-arid zones in Uganda. However, the genotype by environment interaction, in addition to the several methods used for its assessment, complicates selection of varieties adapted to such semi-arid areas.

  1. Analysis of physical interactions between the economy and the environment

    NARCIS (Netherlands)

    De Haes, Helias A Udo; Heijungs, Reinout

    2009-01-01

    In this chapter methods for analysing the physical interactions between the economy and the environment will be discussed. The historic roots of such methods lie in the 19th century and go back to Karl Marx and Friedrich Engels, who used the term 'metabolism' (Stoffwechsel) to imply a relationship

  2. Trust analysis and assessment in virtual organization breeding environments

    NARCIS (Netherlands)

    Msanjila, S.S.; Afsarmanesh, H.

    2008-01-01

    Establishing trust relationships among the member organizations in a virtual organization breeding environment (VBE) is a pre-condition for their smooth cooperation. Furthermore, considering that effective creation of virtual organizations (VOs) is the main aim of the VBEs, the measurement of an

  3. Analysis of the time in virtual training environments

    Directory of Open Access Journals (Sweden)

    Ángel GARCÍA DEL DUJO

    2011-09-01

    Full Text Available The objective of this article is to analyze the character of time on virtual training environments, meaning, to see whether in these environments is present or not the sense, the sensation, the notion of time; if so, it aims, secondly, to rebuilt the forms how this notion is generated and their senses on different environments, meaning, to identify the mechanisms used to generate this timing notion and the processes and transformations that are produced. we assume that, if the Network has a sense in the education field, besides being an information tool and a training space, it is also because the individuals and social groups move, coexist, have relations and communicate among them, building and destroying, creating multiple and complex identities, being all this possible only if its activity answer to timing-space traditional coordinates. The article present the data of a study conducted with a sample of 93 individuals among 20 and 30 years old. The results support the thesis of timing perception and show diverse timing mechanism in different virtual environments.

  4. Analysis of students’ generated questions in laboratory learning environments

    Directory of Open Access Journals (Sweden)

    Juan Antonio Llorens-Molina

    2012-03-01

    Full Text Available In order to attain a reliable laboratory work assessment, we argue taking the Learning Environment as a core concept and a research paradigm that considers the factors affecting the laboratory as a particularly complex educational context. With regard to Laboratory Learning Environments (LLEs, a well known approach is the SLEI (Science Laboratory Environment Inventory. The aim of this research is to design and apply an alternative and qualitative assessment tool to characterize Laboratory Learning Environments in an introductory course of organic chemistry. An alternative and qualitative assessment tool would be useful for providing feed-back for experimental learning improvement; serving as a complementary triangulation tool in educational research on LLEs; and generating meaningful categories in order to design quantitative research instruments. Toward this end, spontaneous questions by students have been chosen as a reliable source of information. To process these questions, a methodology based on the Grounded Theory has been developed to provide a framework for characterizing LLEs. This methodology has been applied in two case studies. The conclusions lead us to argue for using more holistic assessment tools in both everyday practice and research. Likewise, a greater attention should be paid to metacognition to achieve suitable self-perception concerning students’ previous knowledge and manipulative skills.

  5. Load environment of rail joint bars -- phase II, joint bar service environment and fatigue analysis.

    Science.gov (United States)

    2014-07-01

    Detailed analysis of measured bending strains shows that the foundation deflections have the most significant effect on the : magnitude of strains. All other factors, such as track type, track geometry, and fastening systems, have a less significant ...

  6. MANAGEMENT basic professional educational program IN THE CONDITIONS OF information and educational environment based on cloud TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    O. F. Bryksina

    2016-01-01

    Full Text Available The article substantiates the advantages of building information-educational environment of the basic professional educational program based on cloud technologies. Universal tool for building information-educational environment is Google Apps for Education services, which allows to organize the effective cooperation of all participants of the educational process, to plan collaborative activities, properly allocate resources and provide the solution of various learning tasks by necessary tools. Examples of using various Google-services in the organization of the collaborative activities of teachers of the department of applied informatics and information technologies in education of the Minin Nizhny Novgorod State Pedagogical University to improve implementation of the basic professional educational program in the direction of preparation "Information systems and technology". The core of the informational and educational environment of the basic professional educational program is Google-site that integrates different Google services and Google Apps applications.

  7. Influence of Library Environments, Instructional Programs, and User-Librarian Collaborations on Library Use by Undergraduate Students in Nigeria

    Directory of Open Access Journals (Sweden)

    Amusa Oyintola Isiaka

    2013-06-01

    Full Text Available This study employed a survey method to investigate the influence of library environments, user education, and user-librarian collaborations on the use of academic libraries by undergraduate students in Nigeria. 2,676 students from six universities in the South-West Nigeria responded to the questionnaire. The findings revealed that the academic libraries are less used because of the availability of alternative information systems (such as the Internet, reading-rooms in residence halls and apartments, poor library environment, inadequate user education programs, and absence of formal user-librarian collaboration programs. It is recommended that the internal and external environment of the libraries be improved, that user education programs be extended to 2 semesters, and that user-librarian collaborations be institutionalised.

  8. Space Environment Automated Alerts and Anomaly Analysis Assistant (SEA^5) for NASA

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop a comprehensive analysis and dissemination system (Space Environment Automated Alerts  & Anomaly Analysis Assistant: SEA5) that will...

  9. Participant Interaction in Asynchronous Learning Environments: Evaluating Interaction Analysis Methods

    Science.gov (United States)

    Blanchette, Judith

    2012-01-01

    The purpose of this empirical study was to determine the extent to which three different objective analytical methods--sequence analysis, surface cohesion analysis, and lexical cohesion analysis--can most accurately identify specific characteristics of online interaction. Statistically significant differences were found in all points of…

  10. Food environment of fruits and vegetables in the territory of the Health Academy Program.

    Science.gov (United States)

    Costa, Bruna Vieira de Lima; Oliveira, Cláudia Di Lorenzo; Lopes, Aline Cristine Souza

    2015-11-01

    This study provides a spatial analysis of distribution and access to commercial fruit and vegetable establishments within the territory of a representative sample of public fitness facilities known as the Health Academy Program (HAP) in Belo Horizonte, Minas Gerais State, Brazil. The study evaluated commercial food establishments within a buffer area based on a radius of 1,600 meters around each of 18 randomly selected fitness facilities. Quality of access to fruits and vegetables was assessed by the Healthy Food Store Index (HFSI), consisting of the variables availability, variety, and advertising of fruits, vegetables and ultra-processed foods. The analysis was based on calculation of the Kernel intensity estimator, nearest neighbor method, and Ripley K-function. Of the 336 food establishments, 61.3% were green grocers and open-air markets, with a median HFSI of 11 (5 to 16). In only 17% of the territories, the majority of the "hot area" establishments displayed better access to healthy foods, and only three areas showed a clustering pattern. The study showed limited access to commercial establishments supplying healthy fruits and vegetables within the territory of the public fitness program.

  11. Development of educational program for neutron activation analysis

    International Nuclear Information System (INIS)

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Ryel, Sung; Kang, Young Hwan; Lee, Kil Yong; Yeon, Yeon Yel; Cho, Seung Yeon

    2000-08-01

    This technical report is developed to apply an educational and training program for graduate student and analyst utilizing neutron activation analysis. The contents of guide book consists of five parts as follows; introduction, gamma-ray spectrometry and measurement statistics, its applications, to understand of comprehensive methodology and to utilize a relevant knowledge and information on neutron activation analysis

  12. Planning, Conducting, and Documenting Data Analysis for Program Improvement

    Science.gov (United States)

    Winer, Abby; Taylor, Cornelia; Derrington, Taletha; Lucas, Anne

    2015-01-01

    This 2015 document was developed to help technical assistance (TA) providers and state staff define and limit the scope of data analysis for program improvement efforts, including the State Systemic Improvement Plan (SSIP); develop a plan for data analysis; document alternative hypotheses and additional analyses as they are generated; and…

  13. Development of educational program for neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Ryel, Sung; Kang, Young Hwan; Lee, Kil Yong; Yeon, Yeon Yel; Cho, Seung Yeon

    2000-08-01

    This technical report is developed to apply an educational and training program for graduate student and analyst utilizing neutron activation analysis. The contents of guide book consists of five parts as follows; introduction, gamma-ray spectrometry and measurement statistics, its applications, to understand of comprehensive methodology and to utilize a relevant knowledge and information on neutron activation analysis.

  14. Nursing students’ perceptions of their educational environment in the bachelor’s programs of the Shifa College of Nursing, Pakistan

    Directory of Open Access Journals (Sweden)

    Gideon Victor

    2016-12-01

    Full Text Available Purpose The objective of this study was to evaluate nursing students’ perceptions of their educational environment in a private college. Perceptions were compared between genders and 2 bachelor’s programs. Methods A total of 219 students participated in this study, drawn from the Generic Bachelor of Science in Nursing (GBSN and the Post-Registered Nurse Bachelor of Science in Nursing (PRBSN programs of the Shifa College of Nursing, Islamabad, Pakistan. The Dundee Ready Education Environment Measure was utilized for data collection. Descriptive statistics were used to calculate total scores, as well as means and standard deviations, and the t-test was applied for comparisons according to program and gender. Results The overall total mean score (119 of 200 is suggestive of more positive than negative perceptions of the educational environment. The mean score of 13 of 28 on the social self-perception subscale suggests that the social environment was felt to be ‘not a nice place.’ The t-test revealed more positive perceptions among students enrolled in the PRBSN program (P<0.0001 than among those enrolled in the GBSN program and more positive perceptions among female students than among male students (P<0.0001. Conclusion Commonalities and differences were found in the perceptions of the nursing students. Both positive and negative perceptions were reported; the overall sense of a positive environment was present, but the social component requires immediate attention, along with other unsatisfactory components. Establishing a supportive environment conducive to competence-based learning would play an important role in bringing desirable changes to the educational environment.

  15. BeHealthy Charities Aid Foundation Program, Russia: a Program Impact Pathways (PIP) analysis.

    Science.gov (United States)

    Mukhina, Marina; Novikova, Irina

    2014-09-01

    In 2007, the Charities Aid Foundation Branch in Russia, under the initiative of and with financial support from the Mondelēz International Foundation and Mondelēz International, launched the charitable BeHealthy Program. The program's main focus is the implementation of four interrelated activities: conducting lessons for schoolchildren on healthy nutrition, with an emphasis on breakfast; healthy cooking lessons with children; cultivating nutritional plants; and providing conditions to encourage children to engage in more physical activity. The program serves more than 13,000 children attending public schools in the Leningrad (Lomonosovskii District), Vladimir, and Novgorod regions. BeHealthy provides funding for schools and comprehensive educational materials to help schoolchildren develop habits of healthy nutrition and physical activity, as well as consulting and expert support for school staff and other key stakeholders. The program brings in experts on program implementation and training for teachers. Curriculum support also includes printed and Web-based healthy lifestyle educational materials on best practices and positive experience, as well as meetings and conferences with school representatives and local authorities. One of the biggest challenges for program managers is to fully understand the complexities of the program, and why and how it is expected to induce changes in healthy lifestyle behaviors of the schoolchildren. For more comprehensive understanding, we performed a Program Impact Pathways (PIP) analysis to identify Critical Quality Control Points (CCPs) and a suite of core indicators of the program's impact on healthy lifestyles. The findings were presented at the Healthy Life-styles Program Evaluation Workshop held in Granada, Spain, 13-14 September 2013, under the auspices of the Mondelēz International Foundation. First, we developed an updated logic model based on how the program was executed. We then translated the logic model into a PIP

  16. Cloud hosting of the IPython Notebook to Provide Collaborative Research Environments for Big Data Analysis

    Science.gov (United States)

    Kershaw, Philip; Lawrence, Bryan; Gomez-Dans, Jose; Holt, John

    2015-04-01

    We explore how the popular IPython Notebook computing system can be hosted on a cloud platform to provide a flexible virtual research hosting environment for Earth Observation data processing and analysis and how this approach can be expanded more broadly into a generic SaaS (Software as a Service) offering for the environmental sciences. OPTIRAD (OPTImisation environment for joint retrieval of multi-sensor RADiances) is a project funded by the European Space Agency to develop a collaborative research environment for Data Assimilation of Earth Observation products for land surface applications. Data Assimilation provides a powerful means to combine multiple sources of data and derive new products for this application domain. To be most effective, it requires close collaboration between specialists in this field, land surface modellers and end users of data generated. A goal of OPTIRAD then is to develop a collaborative research environment to engender shared working. Another significant challenge is that of data volume and complexity. Study of land surface requires high spatial and temporal resolutions, a relatively large number of variables and the application of algorithms which are computationally expensive. These problems can be addressed with the application of parallel processing techniques on specialist compute clusters. However, scientific users are often deterred by the time investment required to port their codes to these environments. Even when successfully achieved, it may be difficult to readily change or update. This runs counter to the scientific process of continuous experimentation, analysis and validation. The IPython Notebook provides users with a web-based interface to multiple interactive shells for the Python programming language. Code, documentation and graphical content can be saved and shared making it directly applicable to OPTIRAD's requirements for a shared working environment. Given the web interface it can be readily made into a hosted

  17. The SCEC Community Modeling Environment(SCEC/CME): A Collaboratory for Seismic Hazard Analysis

    Science.gov (United States)

    Maechling, P. J.; Jordan, T. H.; Minster, J. B.; Moore, R.; Kesselman, C.

    2005-12-01

    The SCEC Community Modeling Environment (SCEC/CME) Project is an NSF-supported Geosciences/IT partnership that is actively developing an advanced information infrastructure for system-level earthquake science in Southern California. This partnership includes SCEC, USC's Information Sciences Institute (ISI), the San Diego Supercomputer Center (SDSC), the Incorporated Institutions for Research in Seismology (IRIS), and the U.S. Geological Survey. The goal of the SCEC/CME is to develop seismological applications and information technology (IT) infrastructure to support the development of Seismic Hazard Analysis (SHA) programs and other geophysical simulations. The SHA application programs developed on the Project include a Probabilistic Seismic Hazard Analysis system called OpenSHA. OpenSHA computational elements that are currently available include a collection of attenuation relationships, and several Earthquake Rupture Forecasts (ERFs). Geophysicists in the collaboration have also developed Anelastic Wave Models (AWMs) using both finite-difference and finite-element approaches. Earthquake simulations using these codes have been run for a variety of earthquake sources. Rupture Dynamic Model (RDM) codes have also been developed that simulate friction-based fault slip. The SCEC/CME collaboration has also developed IT software and hardware infrastructure to support the development, execution, and analysis of these SHA programs. To support computationally expensive simulations, we have constructed a grid-based scientific workflow system. Using the SCEC grid, project collaborators can submit computations from the SCEC/CME servers to High Performance Computers at USC and TeraGrid High Performance Computing Centers. Data generated and archived by the SCEC/CME is stored in a digital library system, the Storage Resource Broker (SRB). This system provides a robust and secure system for maintaining the association between the data seta and their metadata. To provide an easy

  18. A study of System Interface Sets (SIS) for the host, target and integration environments of the Space Station Program (SSP)

    Science.gov (United States)

    Mckay, Charles; Auty, David; Rogers, Kathy

    1987-01-01

    System interface sets (SIS) for large, complex, non-stop, distributed systems are examined. The SIS of the Space Station Program (SSP) was selected as the focus of this study because an appropriate virtual interface specification of the SIS is believed to have the most potential to free the project from four life cycle tyrannies which are rooted in a dependance on either a proprietary or particular instance of: operating systems, data management systems, communications systems, and instruction set architectures. The static perspective of the common Ada programming support environment interface set (CAIS) and the portable common execution environment (PCEE) activities are discussed. Also, the dynamic perspective of the PCEE is addressed.

  19. School Food Environment Promotion Program: Applying the Socio-ecological Approach

    Directory of Open Access Journals (Sweden)

    Fatemeh Bakhtari Aghdam

    2018-01-01

    Full Text Available Background Despite of healthy nutrition recommendations have been offered in recent decades, researches show an increasing rate of unhealthy junk food consumption among primary school children. The aim of this study was to investigate the effects of health promotion intervention on the school food buffets and the changes in nutritional behaviors of the students. Materials and Methods In this Quasi-interventional study, eight schools agreed to participate in Tabriz city, Iran. The schools were randomly selected and divided into an intervention and a control group, and a pretest was given to both groups. A four weeks interventional program was conducted in eight randomly selected schools of the city based on the socio-ecological model. A check list was designed for the assessment of food items available at the schools’ buffets, a 60-item semi-quantitative food frequency questionnaire (FFQ was used to assess the rate of food consumption and energy intake. Results evaluation and practice were analyzed using the Wilcoxon, Mann Whitney-U and Chi-square tests. Results The findings revealed reduction in the intervention group between before and after intervention with regard the range of junk food consumption, except for the sweets consumption. The number of junk foods provided in the schools buffets reduced in the intervention group. After the intervention on the intervention group significant decreases were found in the intake of energy, fat and saturated fatty acids compared to the control group (p = 0.00.   Conclusion In order to design effective school food environment promotion programs, school healthcare providers should consider multifaceted approaches.

  20. Abstracts of reports published in the environmental programs of the Department of Energy and Environment, January-December 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    This 1978 Annual Abstracts represents the publishing experience over the past year of the three divisions and one group that make up the Environmental Sciences area of the Department of Energy and Environment. The abstracts are grouped according to the organization of the authors under the Atmospheric Sciences, Environmental Chemistry, and Oceanographic Sciences Division and the Land and Fresh Water Environmental Sciences Group. The range of interests and the interdisciplinary nature of the activities within Environmental Programs are demonstrated by these abstracts. Most of these activities relate in some way to the environmental effects or potential effects of energy generation. The major areas involved include: coastal meteorology; physical, biological, and chemical oceanography of the coastal shelf; analysis of marine, fresh water, and terrestrial ecosystems; effects of acid rain and other pollutants on aquatic and terrestrial systems; Multistate Power Production Pollution Study (MAP3S), including transport and transformation experiments, data management, and modeling and analysis; atmospheric diagnostics including the study of the chemistry of pollutants in plumes and ambient atmosphere; basic and applied studies of atmospheric aerosol generation, composition, and behavior; and development of atmospheric tracer systems and real-time instrumentation.

  1. Abstracts of reports published in the environmental programs of the Department of Energy and Environment, January-December 1978

    International Nuclear Information System (INIS)

    1979-05-01

    This 1978 Annual Abstracts represents the publishing experience over the past year of the three divisions and one group that make up the Environmental Sciences area of the Department of Energy and Environment. The abstracts are grouped according to the organization of the authors under the Atmospheric Sciences, Environmental Chemistry, and Oceanographic Sciences Division and the Land and Fresh Water Environmental Sciences Group. The range of interests and the interdisciplinary nature of the activities within Environmental Programs are demonstrated by these abstracts. Most of these activities relate in some way to the environmental effects or potential effects of energy generation. The major areas involved include: coastal meteorology; physical, biological, and chemical oceanography of the coastal shelf; analysis of marine, fresh water, and terrestrial ecosystems; effects of acid rain and other pollutants on aquatic and terrestrial systems; Multistate Power Production Pollution Study (MAP3S), including transport and transformation experiments, data management, and modeling and analysis; atmospheric diagnostics including the study of the chemistry of pollutants in plumes and ambient atmosphere; basic and applied studies of atmospheric aerosol generation, composition, and behavior; and development of atmospheric tracer systems and real-time instrumentation

  2. Economic Growth and the Environment. An empirical analysis

    Energy Technology Data Exchange (ETDEWEB)

    De Bruyn, S.M.

    1999-12-21

    A number of economists have claimed that economic growth benefits environmental quality as it raises political support and financial means for environmental policy measures. Since the early 1990s this view has increasingly been supported by empirical evidence that has challenged the traditional belief held by environmentalists that economic growth degrades the environment. This study investigates the relationship between economic growth and environmental quality and elaborates the question whether economic growth can be combined with a reduced demand for natural resources. Various hypotheses on this relationship are described and empirically tested for a number of indicators of environmental pressure. The outcome of the tests advocates the use of alternative models for estimation that alter conclusions about the relationship between economic growth and the environment and give insight into the driving forces of emission reduction in developed economies. refs.

  3. Analysis of ecological environment impact of coal exploitation and utilization

    Science.gov (United States)

    Zhang, Baoliu; Luo, Hong; Lv, Lianhong; Wang, Jian; Zhang, Baoshi

    2018-02-01

    Based on the theory of life cycle assessment, the ecological and environmental impacts of coal mining, processing, utilization and transportation will be analyzed, with analysing the status of china’s coal exploitation and utilization as the basis, it will find out the ecological and environmental impact in the development and utilization of coal, mainly consist of ecological impact including land damage, water resource destructionand biodiversity loss, etc., while the environmental impact include air, water, solid waste pollutions. Finally with a summary of the ecological and environmental problems, to propose solutionsand countermeasures to promote the rational development and consumption of coal, as well as to reduce the impact of coal production and consumption on the ecological environment, finally to achieve the coordinated development of energy and the environment.

  4. Distributed Scheduling in Time Dependent Environments: Algorithms and Analysis

    OpenAIRE

    Shmuel, Ori; Cohen, Asaf; Gurewitz, Omer

    2017-01-01

    Consider the problem of a multiple access channel in a time dependent environment with a large number of users. In such a system, mostly due to practical constraints (e.g., decoding complexity), not all users can be scheduled together, and usually only one user may transmit at any given time. Assuming a distributed, opportunistic scheduling algorithm, we analyse the system's properties, such as delay, QoS and capacity scaling laws. Specifically, we start with analyzing the performance while \\...

  5. Analysis of Development Environment and Development Trend of Chinese Tourism

    Science.gov (United States)

    Zhao, Liyun; Li, Lingzhi

    2018-01-01

    Since the reform and opening up of Chinese tourism industry, the scale has been continuously expanded and the income from tourism has been continuously increasing. Chinese tourism industry has become one of the most potential industries in the service industry. By analyzing the development environment and development trend of Chinese tourism industry from 2000 to 2016, we can understand the current situation of Chinese tourism development and provide suggestions for better development of Chinese tourism industry.

  6. A care improvement program acting as a powerful learning environment to support nursing students learning facilitation competencies.

    Science.gov (United States)

    Jukema, Jan S; Harps-Timmerman, Annelies; Stoopendaal, Annemiek; Smits, Carolien H M

    2015-11-01

    Change management is an important area of training in undergraduate nursing education. Successful change management in healthcare aimed at improving practices requires facilitation skills that support teams in attaining the desired change. Developing facilitation skills in nursing students requires formal educational support. A Dutch Regional Care Improvement Program based on a nationwide format of change management in healthcare was designed to act as a Powerful Learning Environment for nursing students developing competencies in facilitating change. This article has two aims: to provide comprehensive insight into the program components and to describe students' learning experiences in developing their facilitation skills. This Dutch Regional Care Improvement Program considers three aspects of a Powerful Learning Environment: self-regulated learning; problem-based learning; and complex, realistic and challenging learning tasks. These three aspects were operationalised in five distinct areas of facilitation: increasing awareness of the need for change; leadership and project management; relationship building and communication; importance of the local context; and ongoing monitoring and evaluation. Over a period of 18 months, 42 nursing students, supported by trained lecturer-coaches, took part in nine improvement teams in our Regional Care Improvement Program, executing activities in all five areas of facilitation. Based on the students' experiences, we propose refinements to various components of this program, aimed at strengthenin the learning environment. There is a need for further detailed empirical research to study the impact this kind of learning environment has on students developing facilitation competencies in healthcare improvement. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Sowing the Seeds of Strategic Success Across West Africa: Propagating the State Partnership Program to Shape the Security Environment

    Science.gov (United States)

    2017-06-09

    region’s continued growth in economics , population, influence, and the correlating 17 increase in risks to stability from radicalization and...environment and stem the tide of regional instability . The National Guard’s State Partnership Program is a security cooperation tool that Geographic... instability . The National Guard’s State Partnership Program is a security cooperation tool that Geographic Combatant Commanders can leverage to enhance the

  8. Optics Program Simplifies Analysis and Design

    Science.gov (United States)

    2007-01-01

    Engineers at Goddard Space Flight Center partnered with software experts at Mide Technology Corporation, of Medford, Massachusetts, through a Small Business Innovation Research (SBIR) contract to design the Disturbance-Optics-Controls-Structures (DOCS) Toolbox, a software suite for performing integrated modeling for multidisciplinary analysis and design. The DOCS Toolbox integrates various discipline models into a coupled process math model that can then predict system performance as a function of subsystem design parameters. The system can be optimized for performance; design parameters can be traded; parameter uncertainties can be propagated through the math model to develop error bounds on system predictions; and the model can be updated, based on component, subsystem, or system level data. The Toolbox also allows the definition of process parameters as explicit functions of the coupled model and includes a number of functions that analyze the coupled system model and provide for redesign. The product is being sold commercially by Nightsky Systems Inc., of Raleigh, North Carolina, a spinoff company that was formed by Mide specifically to market the DOCS Toolbox. Commercial applications include use by any contractors developing large space-based optical systems, including Lockheed Martin Corporation, The Boeing Company, and Northrup Grumman Corporation, as well as companies providing technical audit services, like General Dynamics Corporation

  9. Computer programs for analysis of geophysical data

    Energy Technology Data Exchange (ETDEWEB)

    Rozhkov, M.; Nakanishi, K.

    1994-06-01

    This project is oriented toward the application of the mobile seismic array data analysis technique in seismic investigations of the Earth (the noise-array method). The technique falls into the class of emission tomography methods but, in contrast to classic tomography, 3-D images of the microseismic activity of the media are obtained by passive seismic antenna scanning of the half-space, rather than by solution of the inverse Radon`s problem. It is reasonable to expect that areas of geothermal activity, active faults, areas of volcanic tremors and hydrocarbon deposits act as sources of intense internal microseismic activity or as effective sources for scattered (secondary) waves. The conventional approaches of seismic investigations of a geological medium include measurements of time-limited determinate signals from artificial or natural sources. However, the continuous seismic oscillations, like endogenous microseisms, coda and scattering waves, can give very important information about the structure of the Earth. The presence of microseismic sources or inhomogeneities within the Earth results in the appearance of coherent seismic components in a stochastic wave field recorded on the surface by a seismic array. By careful processing of seismic array data, these coherent components can be used to develop a 3-D model of the microseismic activity of the media or images of the noisy objects. Thus, in contrast to classic seismology where narrow windows are used to get the best time resolution of seismic signals, our model requires long record length for the best spatial resolution.

  10. Computer programs for analysis of geophysical data

    International Nuclear Information System (INIS)

    Rozhkov, M.; Nakanishi, K.

    1994-06-01

    This project is oriented toward the application of the mobile seismic array data analysis technique in seismic investigations of the Earth (the noise-array method). The technique falls into the class of emission tomography methods but, in contrast to classic tomography, 3-D images of the microseismic activity of the media are obtained by passive seismic antenna scanning of the half-space, rather than by solution of the inverse Radon's problem. It is reasonable to expect that areas of geothermal activity, active faults, areas of volcanic tremors and hydrocarbon deposits act as sources of intense internal microseismic activity or as effective sources for scattered (secondary) waves. The conventional approaches of seismic investigations of a geological medium include measurements of time-limited determinate signals from artificial or natural sources. However, the continuous seismic oscillations, like endogenous microseisms, coda and scattering waves, can give very important information about the structure of the Earth. The presence of microseismic sources or inhomogeneities within the Earth results in the appearance of coherent seismic components in a stochastic wave field recorded on the surface by a seismic array. By careful processing of seismic array data, these coherent components can be used to develop a 3-D model of the microseismic activity of the media or images of the noisy objects. Thus, in contrast to classic seismology where narrow windows are used to get the best time resolution of seismic signals, our model requires long record length for the best spatial resolution

  11. Energy And Environment in Urban Regeneration. Studies for a Method of Analysis of Urban Periphery

    Directory of Open Access Journals (Sweden)

    Paolo De Pascali

    2014-05-01

    Full Text Available Despite planning of urban regeneration has been theorized from several decades, today activating concrete programs encounters major difficulties. Moreover, the structural nature of economic crisis and the operators tendency to maintaining obsolete models of urban transformation certainly do not help to overcome the stalemate.The article argues, however, that this framework appears to evolve under the influence of some external factors that bring to the fore the importance of the energy - environmental components in the renewal of the existing city.This address, focused on the concept of urban environment, seems to identify new principles of economic environmental sustainability of the city that converge towards social models of smart community and urban models of smart city.The article then describes the research in progress regarding an operative method to define explicit and replicable bases of the urban environment concept to be considered in plans of urban renewal. Main fields of observation and measurement are “urban comfort” and “anthropogenic load (pollution”. An experimental application of the analysis is developed on the eastern area of Rome. Finally, the paper offers specific lines for the research development.

  12. A multi-dimensional environment-health risk analysis system for the English regions

    Science.gov (United States)

    Vitolo, Claudia; Scutari, Marco; Ghalaieny, Mohamed; Tucker, Allan; Russell, Andrew

    2017-04-01

    There is an overwhelming body of evidence that environmental pollution, and air pollution in particular, is a significant threat to health worldwide. While in developed countries the introduction of environmental legislation and sustainable technologies aims to mitigate adverse effects, developing countries are at higher risk. Within the scope of the British Council funded KEHRA project, work is on-going to develop a reproducible and reliable system to assess health risks due to exposure to pollution under climate change and across countries. Our approach is based on the use of Bayesian Networks. We used these graphical models to explore and model the statistical dependence structure of the intricate environment-health nexus. We developed a robust modelling workflow in the R programming language to facilitate reproducibility and tested it on the English regions in the United Kingdom. Preliminary results are encouraging, showing that the model tests generally well in sample (training data spans the period 1981-2005) and has good predictive power when tested out of sample (testing data spans the period 2006-2014). We plan to show the results of this preliminary analysis as well as test the model under future climate change scenarios. Future work will also investigate the transferability of the model from a data-rich (England) to a data-poor environment (Kazakhstan).

  13. LASER SPECTROSCOPY AND TRACE ELEMENT ANALYSIS Chapter from the Energy and Environment Division Annual Report 1980

    Energy Technology Data Exchange (ETDEWEB)

    Various, Authors

    1981-05-01

    In order to control pollutants resulting from energy production and utilization, adequate methods are required for monitoring the level of various substances often present at low concentrations. The Energy and Environment Division Applied Research in Laser Spectroscopy & Analytical Techniques Program is directed toward meeting these needs, Emphasis is on the development of physical methods, as opposed to conventional chemical analysis techniques. The advantages, now widely recognized, include ultra-high sensitivity coupled with minimal sample preparation. In some instances physical methods provide multi-parameter measurements which often provide the only means of achiev·ing the sensitivity necessary for the detection of trace contaminants. Work is reported in these areas: APPLIED PHYSICS AND LASER SPECTROSCOPY RESEARCH; MICROPROCESSOR CONTROLLER ANODIC STRIPPING VOLTAMETER FOR TRACE METALS ANALYSIS IN WATER; THE SURVEY OF INSTRUMENTATION FOR ENVIRONMENTAL MONITORING; THE POSSIBLE CHRONDRITIC NATURE OF THE DANISH CRETACEOUS~TERTIARY BOUNDARY; IMPROVEMENT OF THE SENSITIVITY AND PRECISION OF NEUTRON ACTIVATION ANALYSIS OF SOME ELEMENTS IN PLANKTON AND PLANKTONIC FISH; and SOURCES OF SOME SECONDARILY WORKED OBSIDIAN ARTIFACTS FROM TIKAL, GUATEMALA.

  14. GUI program to compute probabilistic seismic hazard analysis

    International Nuclear Information System (INIS)

    Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

    2005-12-01

    The first stage of development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface (GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The first part has developed and others are developing now in this term. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within the limits of the possibility

  15. GUI program to compute probabilistic seismic hazard analysis

    International Nuclear Information System (INIS)

    Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

    2006-12-01

    The development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface(GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within limits of the possibility

  16. A comparative analysis of influenza vaccination programs.

    Directory of Open Access Journals (Sweden)

    Shweta Bansal

    2006-10-01

    Full Text Available BACKGROUND: The threat of avian influenza and the 2004-2005 influenza vaccine supply shortage in the United States have sparked a debate about optimal vaccination strategies to reduce the burden of morbidity and mortality caused by the influenza virus. METHODS AND FINDINGS: We present a comparative analysis of two classes of suggested vaccination strategies: mortality-based strategies that target high-risk populations and morbidity-based strategies that target high-prevalence populations. Applying the methods of contact network epidemiology to a model of disease transmission in a large urban population, we assume that vaccine supplies are limited and then evaluate the efficacy of these strategies across a wide range of viral transmission rates and for two different age-specific mortality distributions. We find that the optimal strategy depends critically on the viral transmission level (reproductive rate of the virus: morbidity-based strategies outperform mortality-based strategies for moderately transmissible strains, while the reverse is true for highly transmissible strains. These results hold for a range of mortality rates reported for prior influenza epidemics and pandemics. Furthermore, we show that vaccination delays and multiple introductions of disease into the community have a more detrimental impact on morbidity-based strategies than mortality-based strategies. CONCLUSIONS: If public health officials have reasonable estimates of the viral transmission rate and the frequency of new introductions into the community prior to an outbreak, then these methods can guide the design of optimal vaccination priorities. When such information is unreliable or not available, as is often the case, this study recommends mortality-based vaccination priorities.

  17. RT/OS - realtime programming and application environment for the COSY control system

    International Nuclear Information System (INIS)

    Weinert, A.; Hacker, U.; Haberbosch, Ch.; Henn, K.; Simon, M.

    1994-01-01

    This paper presents the highlights and constraints of RT/OS and how it can be used at other places. The support of approximately 1000 VME and VXI CPUs in network-based multiprocessor systems needs a special set of programming tools and application environment which are bundled as the RT/OS Real-Time-Operating-System. Supporting the Motorola 680x0 processors and micro-controller with a development system on UNIX and MS-DOS platforms, the tool set gives the opportunity of bringing small embedded controllers as well as VME multiprocessor systems into operation. The tool set includes a cross compiler and a special version of a remote debugger, as well as application support such as downloading and configuration management. The main feature is a modular kernel with message-based task switching, using the rendezvous principle to allow easy extension. Special features of this kernel for a distributed system are networking with the Berkeley socket library supporting TCP/IP, XNS and Novell Netware, a multiprocessor system on VMEbus with the interprocessor Communication Module (IPC), a device driver library for almost every G64 I/O card using a FieldBus Interface called PDV and a X11R4 port. ((orig.))

  18. RT/OS - realtime programming and application environment for the COSY control system

    Energy Technology Data Exchange (ETDEWEB)

    Weinert, A [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Hacker, U [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Haberbosch, Ch [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Henn, K [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany); Simon, M [Forschungszentrum, Juelich, Postfach 1913, 52425 Juelich (Germany)

    1994-12-15

    This paper presents the highlights and constraints of RT/OS and how it can be used at other places. The support of approximately 1000 VME and VXI CPUs in network-based multiprocessor systems needs a special set of programming tools and application environment which are bundled as the RT/OS Real-Time-Operating-System. Supporting the Motorola 680x0 processors and micro-controller with a development system on UNIX and MS-DOS platforms, the tool set gives the opportunity of bringing small embedded controllers as well as VME multiprocessor systems into operation. The tool set includes a cross compiler and a special version of a remote debugger, as well as application support such as downloading and configuration management. The main feature is a modular kernel with message-based task switching, using the rendezvous principle to allow easy extension. Special features of this kernel for a distributed system are networking with the Berkeley socket library supporting TCP/IP, XNS and Novell Netware, a multiprocessor system on VMEbus with the interprocessor Communication Module (IPC), a device driver library for almost every G64 I/O card using a FieldBus Interface called PDV and a X11R4 port. ((orig.))

  19. Using Python as a first programming environment for computational physics in developing countries

    Science.gov (United States)

    Akpojotor, Godfrey; Ehwerhemuepha, Louis; Echenim, Myron; Akpojotor, Famous

    2011-03-01

    Python unique features such its interpretative, multiplatform and object oriented nature as well as being a free and open source software creates the possibility that any user connected to the internet can download the entire package into any platform, install it and immediately begin to use it. Thus Python is gaining reputation as a preferred environment for introducing students and new beginners to programming. Therefore in Africa, the Python African Tour project has been launched and we are coordinating its use in computational science. We examine here the challenges and prospects of using Python for computational physics (CP) education in developing countries (DC). Then we present our project on using Python to simulate and aid the learning of laboratory experiments illustrated here by modeling of the simple pendulum and also to visualize phenomena in physics illustrated here by demonstrating the wave motion of a particle in a varying potential. This project which is to train both the teachers and our students on CP using Python can easily be adopted in other DC.

  20. An Irish Cross-Institutional User Needs Analysis of Undergraduate Programming

    Directory of Open Access Journals (Sweden)

    Eileen Mary Costelloe

    2006-07-01

    Full Text Available Research literature and practical experience of subject experts indicate that teaching programming to novices has proven challenging for both learner and lecturer. A number of difficulties arise when teaching novices to program. These ranges from the inadequacy of the undergraduate students’ problem-solving skills, problems with understanding programming constructs, to the complexity of the environments in which the students develop their solutions. This paper outlines a project which aims to address some of the challenges faced by novice programmers by providing them with an innovative learning tool, incorporating a set of Reusable Learning Objects (RLOs, based on sound pedagogical principles and encapsulated in a Constructivist Learning Environment (CLE. The Learning Objects will focus on the common areas of weaknesses that are determined by an Irish cross-institutional User Needs Analysis. The initial research activity was to conduct a User Needs Analysis, which was carried out in the three third level academic partner institutions and which will inform and direct the remainder of the research project. The User Needs Analysis confirmed that first year undergraduate students find programming the most challenging module they study. Programming constructs such as Arrays, Looping and Selection were shown to be the most problematic in semester one, and Methods and Polymorphism posing difficulties in semester two. Interestingly the students’ actual and perceived difficulties with the concepts were not in-line, with the students perceiving their difficulties to be less than they actually were. The students acknowledge that problem-solving abilities impacted on their performance but only 20% of students in one college admitted to thinking about their approach in designing programming solutions. The results of the User Needs Analysis directs the design and development of the RLOs and the learning tool.