Directory of Open Access Journals (Sweden)
Priscila Reginato
2013-10-01
Full Text Available O objetivo deste trabalho foi avaliar a qualidade de sementes e o desempenho agronômico de crambe (Crambe abyssinica, semeado em diferentes épocas e profundidades. A cultivar FMS Brilhante foi avaliada em quatro épocas de semeadura (26/3, 9/4, 23/4 e 8/5/2012, a duas profundidades (17,5 e 40,4 mm. A profundidade de semeadura influenciou o diâmetro do caule e a população final de plantas, mas não teve efeito significativo sobre a produtividade. A época de semeadura influenciou o desempenho agronômico e a qualidade de sementes, independentemente da profundidade utilizada, e os melhores resultados observados são os da semeadura no início de abril.
Directory of Open Access Journals (Sweden)
Cláudio Clécio Vidal Eufrausino
2008-06-01
Full Text Available O objetivo deste artigo é discutir a necessidade de repensar o conflito entre disciplinaridade e interdisciplinaridade como se fossem opostos irreconciliáveis. Tentamos demonstrar que a riqueza das ciências humanas cresce através do confronto aberto entre estas duas modalidades de pesquisa, a fim de serem preenchidas as lacunas de ambas. Por meio desta análise, procuramos dar um novo significado para os termos superficialidade e profundidade, tentando superar a antiga oposição que considera profundidade como uma coisa boa em oposição ao caráter superficial. Ao fazermos isto, estamos revendo, com auxílio da teoria de Carlo Ginsburg, a oposição entre retórica e prova, ou, em outros termos, entre factualidade e demonstração argumentativa. Através do enfrentamento dos limites tanto da disciplinaridade quanto da interdisciplinaridade, tentamos apontar novas direções científicas, mostrando soluções marcantes não pelo poder que contêm em si mesmas, mas pela capacidade delas de estimular uma freqüente revisão dos paradigmas das ciências.
Danilo Costa de França
2011-01-01
Objetivou-se estudar o comportamento de estacas escavadas de grande diâmetro em uma obra de um Shopping Center na cidade de São Paulo. As estacas foram submetidas a carregamentos axiais de compressão, sendo que as estacas foram instrumentadas em profundidade. Utilizou-se de teorias amplamente conhecidas no meio técnico com o propósito de interpretar as curvas carga vs recalque, obtendo-se resultados como os diagramas de transferência de carga ao longo do fuste e atrito lateral unitário, gráfi...
Directory of Open Access Journals (Sweden)
Marcelo Claro Souza
2011-12-01
Full Text Available O conhecimento da profundidade ideal de germinação de sementes de plantas daninhas é importante para o desenvolvimento de estratégias de manejo eficientes, seguras e econômicas. Com o objetivo de estudar a emergência de plântulas de Sida rhombifolia L. e Solanum viarum Dunal, em resposta à época (setembro de 2008 e janeiro de 2009 e às profundidades de semeadura (0, 1, 2, 3, 4 e 5 cm, foram realizados dois experimentos em casa de vegetação. Sida rhombifolia mostrou-se sensível às variações de temperatura, em decorrência das épocas de semeadura, e os maiores percentuais de emergência ocorreram nas profundidades entre 1 e 4 cm. Para S. viarum, observou-se forte influência da temperatura sobre a sua emergência, sendo, observado o máximo de emergência, nas profundidades de 1 a 5 cm e sua redução para as sementes locadas na superfície do solo.
Directory of Open Access Journals (Sweden)
Rodolfo de N. Gazola
2013-02-01
Full Text Available The forage production in crop-livestock integration is critical both for formation of straw for no tillage planting and food for livestock farm. The experiment was conducted in the autumn/winter of 2009 and 2010, in the city of Selvíria -state of Mato Grosso do Sul -MS, Brazil, at Experimental Station of FEIS/UNESP. The objective was to evaluate the optimal depth for deposition of seeds of two Brachiaria species intercropped with corn with emphasis on grain yield and straw. The experimental design was a randomized block design in a factorial scheme 3 x 3, with four replications. The main treatments were two species of Brachiaria (Urochloa brizantha "Marandú" and Urochloa ruziziensis, which seeds were mixed with corn fertilizer and a control treatment (without intercropping. Secondary treatments consisted of three depths (8; 10 and 16 cm in the deposition of fertilizer (in the consortium and the control treatments. The intercropping corn with Brachiaria produced similar amounts of straw. The straw total production was higher when intercropped and decreased with depth. The consortium with U. ruziziensis provided higher grain yield of corn in relation to U. brizantha, in 2010. The sowing depth of forages did not affect corn yield.A produção de forragem na integração lavoura-pecuária é de suma importância, tanto para alimentação animal como para formação de palhada para plantio direto. O experimento foi conduzido no outono/inverno de 2009 e 2010, em Selvíria -MS, na Fazenda de Ensino, Pesquisa e Extensão da FEIS/UNESP. O objetivo foi avaliar a profundidade mais adequada para deposição das sementes de duas espécies de braquiárias em consórcio com milho, com ênfase para a produtividade do milho e formação de palha. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 3 x 3, com quatro repetições. Os tratamentos principais foram duas espécies de braquiárias (Urochloa brizantha cv. Marandú e Urochloa
Directory of Open Access Journals (Sweden)
Yiyan Jiang
2013-06-01
Full Text Available JUSTIFICATIVA E OBJETIVOS: Investigar a eficácia clínica, segurança e viabilidade do monitor Narcotrend® para avaliar a profundidade da anestesia em crianças com doença cardíaca congênita (DCC submetidas à cirurgia cardíaca. MÉTODOS: Foram randomicamente selecionadas 80 crianças submetidas à anestesia geral em cirurgia seletiva. As crianças foram divididas em dois grupos de forma aleatória (n = 40 por grupo. No grupo Narcotrend, a profundidade da anestesia foi monitorada com o Narcotrend. No grupo padrão, a profundidade da anestesia foi controlada de acordo com a experiência clínica. A pressão arterial média (PAM e a frequência cardíaca (FC foram determinadas e a dose de fentanil e relaxante muscular e os tempos de recuperação e de extubação foram registrados. RESULTADOS: Em ambos os grupos, os sinais vitais apresentaram-se estáveis durante a cirurgia. No grupo Narcotrend, a PAM e a FC foram mais estáveis, a dose total de fentanil e relaxante muscular significativamente menor e os tempos de recuperação e extubação acentuadamente mais reduzidos em comparação com o grupo padrão. CONCLUSÃO: A aplicação do monitor Narcotrend para medir a profundidade da anestesia foi útil para controlar a profundidade da anestesia em crianças com DCC que receberam anestesia intravenosa total, na qual uma pequena quantidade de narcóticos pode obter a anestesia ideal. Além disso, os tempos de recuperação e extubação foram menores e os efeitos secundários, como sensibilização intraoperatória, puderam ser evitados.
Directory of Open Access Journals (Sweden)
Edson de Almeida Cardoso
2008-12-01
Full Text Available Com o objetivo de estudar a influência da posição e da profundidade de semeadura sobre a emergência de plântulas e o vigor de sementes de mulungu foram instalados testes de germinação em areia sob ambiente protegido. Os tratamentos, representados pela posição e pela profundidade de semeadura das sementes em relação ao substrato foram os seguintes: semente com o hilo voltado para baixo, para cima e para o lado nas profundidades de 1 a 5cm. Cada um dos tratamentos constou de quatro repetições de 25 sementes, avaliados pelo teste de emergência, vigor da primeira contagem, velocidade de emergência, comprimento e massa seca do hipocótilo e das raízes. Os resultados mostraram que, para o mulungu, a profundidade de semeadura dever ser entre 1 e 2cm e, a melhor posição foi aquela em que as sementes ficaram com o hilo voltado para baixo.The aim of this research was to study the influence of the sowing depth and position upon seedling emergency and seed vigor of the coral tree, some germination tests were settled in sand, under protected environment. The treatments were represented by the position and depth of the seed sowings relative to the substratum, as follows: seed with the hilum turned down, upward and to the side at depths 1, 2, 3, 4 and 5cm. Each treatment consisted of four replicates with 25 seeds, and were evaluated by the following tests: emergence, first-counting vigor, emergency speed, length and dry mass of the hypocotyl and roots. According to the results for coral tree, the sowing depth should be between one and two centimeters, whereas the best position was the hilum turned down.
2-D modelling and simulation of EM brake for liquid steel
Aslan, Necdet; Senturk, Kenan; Tessarotto, Massimo
2003-11-01
The problem of EM control of bottom tapping in steelmaking metallurgy is an old and well known challenge not only from the technological viewpoint but also, potentially, an interesting and still open theoretical problem, from the viewpoint of the investigation of the detailed MHD phenomena occurring in EM braking devices [1]. Purpose of the present work is the formulation of a 2-D MHD model for a DC EM braking device, which includes the consistent modelization of inductive EM fields produced by the conductive fluid, large scale turbulence, boundary conditions for the EM fields and thermal effects. The mathematical model has been implemented in a new 2-D MHD code developed for this purpose [2], based on the so-called fluctuation splitting and dual-time stepping methods, respectively, to advance in time the fluid fields and satisfy the relevant incompressibility-solenoidality conditions for the fluid mass velocity and the magnetic field. Main goal of the investigation is the analysis of the nonlinear phenomena occurring in the process of slowing down of a column of liquid steel under the action of the EM brake, and in particular the detailed description of the effects of large scale turbulence produced by the action of Lorentz force on the fluid, their influence on the magnitude of the inductive EM fields and the performance of the EM brake itself. REFERENCES [1] A.Codutti, A.Martinis, M.Pavlicevic, M.Tessarotto and D.Batic, Proc. 3rd International Symposium on EMP (Nagoya, Japan, April 2000), p.530 (2000). [2] N.Aslan, K.Senturk and M.Tessarotto, Efficient 2-D solver for incompressible magnefluids, communication at this Conference (2003).
Directory of Open Access Journals (Sweden)
Alcir José Modolo
2010-06-01
Full Text Available Dentre os fatores primordiais para a germinação estão a umidade, a temperatura e a aeração do solo. É importante citar que esses fatores são diretamente influenciados pelo estado de compactação do solo ao redor da semente. Objetivou-se, neste trabalho, estudar os efeitos da combinação entre profundidades de semeadura e cargas aplicadas pela roda compactadora da semeadora-adubadora sobre o desenvolvimento da cultura do feijão, em sistema plantio direto. Foi utilizado o esquema fatorial no delineamento em blocos ao acaso, composto por doze tratamentos (três profundidades de semeadura e quatro níveis de cargas aplicadas pela roda compactadora e quatro repetições. Os resultados mostraram que a profundidade de semeadura influenciou, significativamente, o índice de velocidade de emergência, os estandes inicial e final de plantas e o rendimento da cultura. As diferentes cargas aplicadas pela roda compactadora não influenciaram significativamente as variáveis avaliadas.Among the primordial factors for the germination are humidity, temperature, and aeration of the soil. It is important to mention that these factors are directly influenced by the soil compaction state around the seed. The present paper had the aim of studying the effects of the combination between depths of sowing and loads applied by press wheel of the seeder upon the development of bean culture, in a no-tillage system. Factor schedule was applied to the delineation in random blocks composed by twelve treatments (three depths of sowing and four levels of loads applied by the press wheel and four replications. The results showed that depth of sowing significantly influenced the index of emergency speed, the initial and final stands of plants and yield of culture. The different loads applied for the press wheel did not significantly influence the evaluated variables.
Directory of Open Access Journals (Sweden)
Laercio Duarte Souza
2004-08-01
Full Text Available A citricultura dos Estados da Bahia e Sergipe representa cerca de 103.000 ha e está localizada nos Tabuleiros Costeiros, onde predominam Latossolos Amarelos, com horizontes coesos que se apresentam endurecidos quando secos. Esse fenômeno impede o desenvolvimento das raízes ao longo do perfil, diminuindo o volume de solo explorado e a disponibilidade de água e nutrientes. Para romper os horizontes coesos e aumentar o volume de solo ocupado pelas raízes, foram utilizados plantios com profundidades de cova de 0,40; 0,60; 0,80; 1,00 e 1,20 m, com laranjeira 'Valência' enxertada sobre limoeiro 'Volkameriano', que apresentaram maior desenvolvimento de raízes quando plantadas em covas de 1,00 m e 1,20 m de profundidade. Não houve diferenças significativas para diâmetro da copa, diâmetro do caule, altura de planta e produção de frutos entre os tratamentos.The citros crop in Bahia and Sergipe, represents about 103.000 hectares and is established in the Coastal Table Land, where Yellow Latosol prevail, with cohesive horizons that become hardned when dry. This problem restrains the development of the roots along the profile of the soil, promoting the decrease of soil volume explored and consequently the availability of water and nutrients. To solve this problem, breaking the cohesive layer and increase the volume of soil roots it was used several depths of planting with holes of 0,40; 0,60; 0,80; 1,00 and 1,20 m, using orange tree 'Valência' grafted on lemon tree 'Volkameriano'. The best development of the roots was obtained with the 1,00 m and 1,20 m of depth. No significant statistical results was obtained for diameter of the cup and the stem, plant height and production of fruits among the treatments.
Directory of Open Access Journals (Sweden)
Mirian Cristina Gomes Costa
2011-09-01
Full Text Available O objetivo deste trabalho foi verificar o papel da profundidade do solo e da microtopografia em aspectos nutricionais e produtivos de bananais irrigados. O estudo foi conduzido na Chapada do Apodi (CE, em área com variações na profundidade do solo. Os tratamentos foram sítios (locais em diferentes classes de micro-relevo (côncavo, convexo e retilíneo que abrangeram quatro profundidades de solo: A 0,92 m; B 0,77 m; C 0,65 m; D 0,52 m. Foram avaliados: altura da planta mãe (APM, altura da planta filha (APF, diâmetro do pseudocaule da planta mãe (DPPM, massa de folhas frescas (MFF e secas (MFS, teores de fósforo (P, potássio (K, cálcio (Ca, enxofre (S e sódio (Na no tecido vegetal e massa dos cachos. O delineamento experimental foi inteiramente casualizado com sete repetições para avaliações de crescimento e cinco repetições para avaliações referentes à massa de folhas, estado nutricional e produção. A análise estatística foi feita pela ANOVA e DMS a 5% de significância. APM e DPPM foram maiores em A e C, enquanto que menores médias ocorreram no solo mais raso (D. MFF e MFS foram superiores em A e D que também apresentaram maior acúmulo de nutrientes nas folhas. Entretanto, maiores teores foliares e níveis adequados de P ocorreram em A, que também apresentou maior massa de cachos em relação aos solos mais rasos. Isto mostra que a profundidade efetiva do solo e o micro-relevo influenciam a absorção de nutrientes, o crescimento e o potencial produtivo de bananeiras irrigadas na Chapada do Apodi.The aim of this research was to verify whether soil depth affects aspects of mineral nutrition and yield potential of irrigated banana plantations. The study was carried out at Apodi Plateau (CE, Brazil, in an area characterized by soil depth variations. The treatments were sites in different microrelief classes (concave, convex and retilinea with four different soil depths: A 0.92 m; B 0.77 m; C 0.6 5m; D 0.52 m. The
A inversão visual da profundidade na esquizofrenia
Directory of Open Access Journals (Sweden)
Arthur Alves
Full Text Available RESUMO Objetivo Revisar a literatura científica sobre a inversão visual da profundidade na esquizofrenia. Métodos Foi realizada uma busca nos principais indexadores com os descritores relacionados a esquizofrenia, percepção visual de profundidade e ilusão da máscara côncava. Resultado Foram encontrados 12 estudos envolvendo indivíduos com esquizofrenia e a inversão visual da profundidade. Conclusão Há necessidade de mais investigações que coletem mais informações no sentido de delimitar em que condições a inversão visual da profundidade ocorre ou não em indivíduos com esquizofrenia.
Directory of Open Access Journals (Sweden)
Luciana Aily SANTOS
2000-03-01
Full Text Available As propriedades das resinas compostas têm sido estudadas com freqüência, bem como os fatores que podem influenciar seu grau de polimerização. Diante da evolução desses materiais e da necessidade de buscarmos melhora do seu comportamento na cavidade bucal, objetivamos, por meio deste estudo avaliar a eficácia de dois aparelhos fotopolimerizadores do tipo pistola (de alta intensidade de luz, comparando com a de um aparelho a cabo (de baixa intensidade de luz, com tempos de exposição de 20 e de 40 segundos e em profundidades de 1 a 4 milímetros. Os testes avaliaram o grau de polimerização da resina por meio de testes de microdureza Knoop. Os resultados mostraram haver diferença estatisticamente significante entre os tempos, sendo que com 40 segundos a dureza foi maior que com 20 segundos para as 4 diferentes profundidades. Para o fator aparelhos, os dois aparelhos tipo pistola se comportaram superiores ao do tipo cabo Fibralux (Dabi Atlante, e entre eles, o XL 1500 (3M promoveu dureza maior que o Optilight II (Gnatus no tempo de polimerização de 40 segundos. As profundidades de 1, 2, 3 e 4 milímetros mostraram estatisticamente diferença entre si tendo sido encontrada maior dureza para as menores profundidades (p The properties of composite resins have been frequently studied, as well as the factors that might influence the polymerization degree. Considering the evolution of composites and the need to improve their clinical performance, this study intends to evaluate the efficacy of two high-intensity and one low-intensity photocuring units, as a function of exposure time (20 and 40seconds and composite depth (from 1 to 4 millimeters. Composite properties were evaluated via Knoop Microhardness Test. Statistical analysis (1 way ANOVA, p < 0.05 of the obtained results showed that there was statistically significant difference regarding the time factor. The 40-seconds polymerization time showed the best results, for the four depths
Directory of Open Access Journals (Sweden)
Rodrigo OC Monteiro
2008-12-01
Full Text Available The modern techniques of water supply through irrigation can substantially reduce water waste, which contributes to attend the enlarging water demand. The objective of this work was to study the influence of subsurface drip irrigation and mulching over melon yield and quality characteristics, in a sandy soil (Typic Hapludox. The experimental design was blocks at random, with four replications. Treatments were displayed in a 2 x 3 factorial (with and without mulching x surface and 0.20 and 0.40 depth subsurface drip irrigation. Mulching using double-sided silver/black film increased fruit average mass, plant production, yield, daily growth rate for plant height and crown diameter, fruit distal diameter, and pulp thickness. The subsurface drip irrigation at 0.20 m depth resulted in larger fruit average mass, plant production, and yield than surface and 0.40 m depth drip irrigation.As atuais técnicas de aplicação de água pelos sistemas de irrigação podem reduzir substancialmente os desperdícios de água, o que contribui para atender a crescente demanda por esse recurso natural. O objetivo deste trabalho foi estudar aspectos produtivos e de qualidade de frutos de melão rendilhado em sistema de gotejo subterrâneo e cobertura plástica (mulching, em solo arenoso (Latossolo Vermelho-Amarelo. O delineamento adotado foi em blocos casualizados, com quatro blocos, com o arranjo dos tratamentos em fatorial 2 x 3 (com e sem mulching x gotejo superficial e subsuperficial, a 0,20 e 0,40 m de profundidade. O mulching utilizando filme dupla-face prateado/preto incrementou a massa média de fruto, a produção por planta, a produtividade, a taxa de crescimento diário da altura de planta e do diâmetro do colo da planta, o diâmetro longitudinal do fruto e a espessura de polpa. A profundidade de gotejo a 0,20 m resultou em maior massa média de fruto, produção por planta e produtividade quando comparado ao gotejo superficial ou em subsuperfície, a 0
Directory of Open Access Journals (Sweden)
Waldir A. Marouelli
2002-06-01
Full Text Available Avaliou-se a resposta do tomateiro para processamento industrial, irrigado por gotejamento, a diferentes profundidades de instalação da linha lateral de gotejadores (0; 20 e 40 cm. Um tratamento irrigado por aspersão foi utilizado como controle. O experimento foi conduzido na Embrapa Hortaliças, nas condições edafoclimáticas da região de cerrados do Brasil Central. Maior crescimento vegetativo de plantas foi observado nos tratamentos irrigados por aspersão e gotejamento superficial, enquanto que menor crescimento ocorreu no gotejamento a 40 cm. A produtividade comercial do tratamento irrigado por gotejamento superficial (124 t.ha-1 foi 32% maior que no tratamento por gotejamento subterrâneo a 40 cm, 15% maior que no tratamento irrigado por aspersão, não diferindo (p>0,05 do tratamento por gotejamento a 20 cm. Incrementos de produtividade foram devidos, principalmente, ao maior número de frutos por planta, uma vez que o estande final e a massa média de frutos não foram afetados pelos tratamentos. A incidência de frutos podres na irrigação por aspersão foi 112 e 453% maior que nos tratamentos irrigados por gotejamento superficial e subterrâneo, respectivamente.A field experiment was carried out at Embrapa Hortaliças under soil and climate conditions of Central Brazil "cerrado" region, aiming to evaluate the response of drip-irrigated processing tomatoes to different drip line placement depths (0; 20 and 40 cm. A control treatment was irrigated by sprinkle system. Larger plant vegetative growth was observed for the sprinkle and surface drip treatments, while smaller growth occurred for the 40 cm-depth drip treatment. Marketable yield of the surface drip irrigated treatment (124 t.ha-1 was 32% larger than the 40 cm-depth drip treatment, 15% larger than the sprinkle treatment, but did not differ (p>0,05 from the 20 cm-depth drip treatment. Yield increments were basically due to a larger number of fruits per plant, since final
Directory of Open Access Journals (Sweden)
Fabiano André Petter
2009-07-01
Full Text Available The objective of this study was evaluated emergence of four cover crops at different seeding depths, in order to use them intercropped and oversown with annual crops. The experiment was installed in a greenhouse, and it was organized as a 5 × 7 factorial combination, with crop of fve cover crops: Pennisetum glaucum var. ADR 300, ADR 500, and BN2, Eleusine coracana (fnger millet, and a cober crop( hybrid sorghum with sudan-grass [Sorghum bicolor x Sorghum sudanese]; seven cover crops seeding depths: (0 cm without any mulch; 0 cm with a mulch of leaves over the seeds;1; 4; 8; 10; and 15 cm.The cover crops were cropping in vases for 40 days. It was evaluated emergence index, emergence time, plant height, green biomass and dry biomass of the above-ground part, leaf area, root dry biomass and root length density. There was reduction of emergence when cover crops was seeded at zero cm depth with a mulch of leaves, except for the E. coracana, that had a better performance in the oversown. Pearl millets and hybrid S. bicolor x S. sudanense show up some restrictions when used in simultaneous consortium. The 15 cm sowing depth must not be used.O objetivo do trabalho foi avaliar a emergência de cinco plantas de cobertura em diferentes profundidades de semeadura, visando à obtenção de informações que subsidiem sua utilização na consorciação e sobressemeadura de culturas anuais. O experimento foi conduzido em casa-de-vegetação, no delineamento experimental de blocos ao acaso, em esquema fatorial 5 x 7, composto pelas plantas de cobertura Pennisetum glaucum var. ADR 300, ADR 500 e BN2, Eleusine coracana e cober crop [híbrido de sorgo com capim-sudão (Sorghum bicolor x Sorghum sudanense], e por sete profundidades de semeadura das plantas de cobertura (0 cm sem presença de folhas de soja sobre as sementes, 0 com presença de folhas de soja sobre as sementes, 1, 4, 8, 10 e 15 cm. As sementes foram semeadas em vasos e as plantas cultivadas por 40
Directory of Open Access Journals (Sweden)
Leonardo Alexandre Peyré-Tartaruga
2006-10-01
Full Text Available O objetivo deste estudo foi analisar os limites e possibilidades da utilização da corrida em piscina funda no treinamento de corredores de rendimento. Além disso, são discutidas as respostas agudas submáximas, máximas e crônicas, do ponto de vista fisiológico e biomecânico entre a corrida em terra e em piscina funda. As respostas máximas de freqüência cardíaca e consumo de oxigênio são menores no exercício aquático do que na corrida terrestre. Dados experimentais sugerem o uso do treinamento de corrida em piscina funda para corredores de rendimento; contudo, essas evidências são limitadas para treinamentos de até 10 semanas.El objetivo de este estudio ha sido el de analizar los límites y posibilidades de la utilización de carreras de velocidad en piscina de profundidad durante el entrenamiento de velocista de rendimiento. Además de esto, son discutidas las respuestas agudas submáximas, máximas y crónicas, bajo el punto de vista fisiológico y biomecánico entre la carrera en tierra y en piscina profunda. Las respuestas máximas de frecuencia cardíaca y consumo de oxígeno son menores en el ejercicio acuático que en la de tierra. Datos experimentales sugieren el uso de entrenamiento de carrera en piscina profunda para velocistas de rendimiento, sin embargo estas evidencias son limitadas a entrenamientos de hasta 10 semanas.The purpose of this study was to analyze the limits and possibilities of deep water running on training of performance runners. Besides, it has been discussed the submaximal acute, maximal acute and chronical responses, following physiological and biomechanical aspects between running on land and deep water running. Heart rate and oxygen uptake's maximal responses are lower in aquatic exercise than in running on land. Experimental evidences suggest the deep water running training for performance athletes, but these studies are limited in training program until ten weeks.
Directory of Open Access Journals (Sweden)
Angela Da Cas Bundt
2010-09-01
Full Text Available Os herbicidas imazetapir e imazapique, usados em cultivares de arroz Clearfield®, possuem alta persistência e mobilidade no solo, ocasionando danos em genótipos de arroz não resistentes cultivados em rotação. Tais herbicidas podem lixiviar e atingir maiores profundidades ao longo do perfil. Esse posicionamento em profundidade pode ser um fator de seletividade e explicar parcialmente os diferentes resultados encontrados na literatura sobre o efeito residual do herbicida no solo. O objetivo do estudo foi avaliar o efeito da profundidade de localização no solo e da mistura formulada pelos herbicidas imazetapir e imazapique (75 e 25g e.a. L-1 na fitotoxicidade em genótipos de arroz não resistentes. Nesse sentido, foram conduzidos dois experimentos em solo com 15% de argila e 1,2% de matéria orgânica, em casa-de-vegetação, no campus da Universidade Federal de Pelotas (UFPel, em Pelotas, Rio Grande do Sul (RS. O experimento I consistiu de estudo preliminar visando a determinar a profundidade máxima de localização do herbicida no solo que causa danos ao arroz não resistente, e o herbicida foi alocado nas profundidades de 0, 5, 10, 20, 30, 50 e 70cm. O experimento II também consistiu na alocação do herbicida em profundidades ao longo do perfil do solo de 3, 6, 9, 12, 15 e 18cm. As variáveis analisadas foram fitotoxicidade, massa da matéria seca e estatura das plantas. O herbicida resultante da mistura formulada de imazetapir com imazapique localizado próximo à superfície do solo causa danos intensos em plantas de arroz não resistente, porém, quando alocado em profundidades maiores que 20cm da superfície do solo, não prejudica o desenvolvimento de genótipos de arroz não resistentes a essa mistura de herbicidas.The herbicides imazethapyr and imazapic, used in Clearfield® rice, have high mobility and persistence in the soil, causing injury to non-resistant rice grown in rotation. These herbicides can leach and reach greater
Transporte de partÃculas com autopropulsÃo em substratos 2d ordenados.
AndrÃ Duarte Borba
2015-01-01
PartÃculas com autopropulsÃo, ou do inglÃs Self Propelled Particles (SPP), sÃo aquelas que utilizam sua energia interna para gerar movimento. O termo estÃ originalmente associado ao modelo introduzido por T. Vicsek et al. [Phys. Rev. Lett.75, 1226 (1995)] que identifica uma transiÃÃo dinÃmica associada ao movimento coletivo de "indivÃduos" de uma mesma espÃcie. Exemplos de SPP ocorrem em sistemas naturais, como microorganismos (bactÃrias, vÃrus e protozoÃrios), ou, artificialmente, como no c...
Directory of Open Access Journals (Sweden)
Yiyan Jiang
2013-06-01
Full Text Available JUSTIFICATIVA E OBJETIVOS: Investigar a eficácia clínica, segurança e viabilidade do monitor Narcotrend® para avaliar a profundidade da anestesia em crianças com doença cardíaca congênita (DCC submetidas à cirurgia cardíaca. MÉTODOS: Foram randomicamente selecionadas 80 crianças submetidas à anestesia geral em cirurgia seletiva. As crianças foram divididas em dois grupos de forma aleatória (n = 40 por grupo. No grupo Narcotrend, a profundidade da anestesia foi monitorada com o Narcotrend. No grupo padrão, a profundidade da anestesia foi controlada de acordo com a experiência clínica. A pressão arterial média (PAM e a frequência cardíaca (FC foram determinadas e a dose de fentanil e relaxante muscular e os tempos de recuperação e de extubação foram registrados. RESULTADOS: Em ambos os grupos, os sinais vitais apresentaram-se estáveis durante a cirurgia. No grupo Narcotrend, a PAM e a FC foram mais estáveis, a dose total de fentanil e relaxante muscular significativamente menor e os tempos de recuperação e extubação acentuadamente mais reduzidos em comparação com o grupo padrão. CONCLUSÃO: A aplicação do monitor Narcotrend para medir a profundidade da anestesia foi útil para controlar a profundidade da anestesia em crianças com DCC que receberam anestesia intravenosa total, na qual uma pequena quantidade de narcóticos pode obter a anestesia ideal. Além disso, os tempos de recuperação e extubação foram menores e os efeitos secundários, como sensibilização intraoperatória, puderam ser evitados.JUSTIFICATIVA Y OBJETIVOS: Investigar la eficacia clínica, la seguridad y la viabilidad del monitor Narcotrend® para evaluar la profundidad de la anestesia en niños con enfermedad cardíaca congénita (ECC sometidos a la cirugía cardíaca. MÉTODOS: Un total de 80 niños sometidos a la anestesia general en cirugía selectiva fueron seleccionados aleatoriamente. Los niños fueron divididos en dos grupos de
Energy Technology Data Exchange (ETDEWEB)
Cavalcante, Tarique da Silveira; Cortez, Paulo Cesar; Almeida, Thomaz Maia de, E-mail: tarique@lesc.ufc.br [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Engenharia de Teleinformatica; Felix, John Hebert da Silva [Universidade da Integracao Internacional da Lusofonia Afro-Brasileira (UNILAB), Redencao, CE (Brazil). Departamento de Energias; Holanda, Marcelo Alcantara [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Fac. de Medicina
2013-07-01
Introduction: much of the world population is affected by pulmonary diseases, such as the bronchial asthma, bronchitis and bronchiectasis. The bronchial diagnosis is based on the airways state. In this sense, the automatic segmentation of the airways in Computed Tomography (CT) scans is a critical step in the aid to diagnosis of these diseases. Methods: this paper evaluates algorithms for airway automatic segmentation, using Neural Network Multilayer Perceptron (MLP) and Lung Densities Analysis (LDA) for detecting airways, along with Region Growing (RG), Active Contour Method (ACM) Balloon and Topology Adaptive to segment them. Results: we obtained results in three stages: comparative analysis of the detection algorithms MLP and LDA, with a gold standard acquired by three physicians with expertise in CT imaging of the chest; comparative analysis of segmentation algorithms ACM Balloon, ACM Topology Adaptive, MLP and RG; and evaluation of possible combinations between segmentation and detection algorithms, resulting in the complete method for automatic segmentation of the airways in 2D. Conclusion: the low incidence of false negative and the significant reduction of false positive, results in similarity coefficient and sensitivity exceeding 91% and 87% respectively, for a combination of algorithms with satisfactory segmentation quality. (author)
Directory of Open Access Journals (Sweden)
Érico Kunde Corrêa
2009-06-01
Full Text Available Deep litter systems represent low cost alternatives to raise growing-finishing pigs, reducing slurry accumulation, although pig's thermal comfort may be negatively affected by the heat produced inside the litter. This study compared environmental and performance parameters for growing-finishing pigs raised on deep litter systems having distinct depths and on solid floor. The experiment was conducted in a region of temperate climate of Brazil, comparing three treatments: litter having rice husk 0.5m (T1; and 0.25m deep (T2; and solid concrete floor (T3. The first litter was used in two lots and replaced by a second litter used in other two lots, during 52 weeks. Each lot included five pigs in a 7m² pen, from 60 to 145 d of age. Environmental parameters were determined at weekly intervals, including: atmospheric temperature; relative humidity; temperature at the center of the pen, in the surface (TSF; and at half of the depth (THD, only for T1 and T2. Feed consumption and weight of pigs were measured every four weeks. Atmospheric temperature and relative humidity were not influenced by the treatments (P>0.05. Mean TSF was 22.8 ± 3.6°C, being lower for T3 (P0.05. TSF was higher for new than for used litters (P0.05. Despite the potential unfavorable thermal comfort under high temperatures, deep litter systems can be used to raise pigs in the growing-finishing phases due to the absence of negative effects for growth performance.O uso de cama representa uma alternativa de baixo custo para a criação de suínos em crescimento e em terminação, promovendo redução do acúmulo de dejetos, embora o conforto térmico dos animais possa ser prejudicado pelo calor produzido no interior da cama. Este estudo compara os parâmetros ambientais e o desempenho de crescimento de suínos em sistemas de criação sobre cama, com profundidades distintas, e sobre piso concreto. O experimento foi realizado em uma região de clima temperado na região Sul do Brasil
Directory of Open Access Journals (Sweden)
Márcio Bartz das Neves
2011-12-01
Full Text Available Oryzophagus oryzae é o inseto-praga chave da cultura do arroz irrigado por inundação na Região Sul do Brasil. Suas larvas, conhecidas por bicheira-da-raiz, causam perdas significativas de produtividade quando danificam o sistema radicular das plantas de arroz. No monitoramento da população larval de O. oryzae em arrozais, ou em levantamentos em experimentos, atualmente são empregadas amostras padrão de solo e raízes, com 8,5cm de profundidade e 10cm de largura, desintegradas por submersão e agitamento em peneira com água, para a contagem de larvas. A visualização de larvas, principalmente de 1o e 2o instar, torna-se difícil na suspensão formada pelo solo das amostras com tais dimensões e a água do interior das peneiras. Assim sendo, foi realizado um experimento para determinar uma profundidade de amostragem que viabilize a captura e a visualização de um maior número possível de larvas, num menor volume possível de solo, em diferentes cultivares de arroz. O experimento foi instalado num Planossolo Háplico, no delineamento de quadrado latino, e incluiu como tratamentos seis cultivares de arroz ('BRS Atalanta'; 'BRS Firmeza'; 'BRS Ligeirinho'; 'BRS Querência'; 'BRS Sinuelo CL'; 'IRGA 417' e três profundidades (3, 6 e 9cm de retirada de amostras de solo e raízes, todas com 10cm de diâmetro. De imediato à retirada de amostras, foi registrado o número de larvas. Posteriormente, em avaliações periódicas, foi registrado o número de adultos emergidos de amostras mantidas intactas em baldes plásticos com lâmina de água de 13, 16 e 19cm, cobertos por tecido telado. Ocorreu interação significativa entre profundidades de amostragem e as cultivares 'BRS Sinuelo CL' e 'BRS Querência' quanto ao índice de infestação larval e de adultos de O. oryzae, respectivamente. No caso de ambas as variáveis, o índice na profundidade de 6cm foi significativamente maior do que na de 3cm, mantendo-se intermediário na de 9cm
Profundidade de semeadura no desenvolvimento inicial de pseudocereais
Directory of Open Access Journals (Sweden)
Daniele Brandstetter Rodrigues
2016-08-01
Full Text Available O objetivo deste trabalho foi avaliar a influência da profundidade de semeadura na emergência de plântulas de sementes de amaranto e quinoa. Foram avaliados os efeitos das profundidades de 0; 0,5; 1,0; 1,5 e 2,5 cm para amaranto e de 0; 1,5; 2,5; 3,5; e 4,5 cm para quinoa, obtidas por meio de anéis de pvc, com espessura equivalente a estes valores, que foram imersos no substrato para simular as profundidades de semeadura. O delineamento experimental foi inteiramente casualizado, com quatro repetições. Os dados foram submetidos à análise de variância e as médias, comparadas pelo teste de Tukey com 5% de probabilidade de erro. Foram realizados os testes de germinação, primeira contagem de germinação, emergência de plântulas em bandejas, massa de matéria seca e peso de mil sementes. A profundidade de semeadura para o melhor desenvolvimento inicial indicada para amaranto é de até 1,5 cm, e para quinoa até 2,5 cm.Seeding depth in the initial development of pseudocerealsAbstract: The objective of this study was to evaluate the influence of sowing depth on emergence of amaranth and quinoa seeds seedlings. The effects of the depths of 0; 0.5; 1.0; 1.5 and 2.5 cm and amaranth 0; 1.5; 2.5; 3.5; quinoa and 4.5 cm, obtained from PVC rings with a thickness equivalent to these values, which were immersed in the substrate to simulate the sowing depths. The experimental design was completely randomized, with four replications. The data were submitted to analysis of variance and the means were compared by Tukey test at 5% probability of error. The germination tests were carried out, first count, seedling emergence on trays, dry mass and weight of a thousand seeds. The seeding depth for the initial development best suited for Amaranthus is up to 1.5 cm, and quinoa to 2.5 cm.
Directory of Open Access Journals (Sweden)
G Concenço
2011-12-01
Full Text Available This study aimed at assessing the level of weed infestation indifferent areas that were submitted to different soil management for 16 years. Four management systems were studied: (1 agriculture only under conventional tillage system; (2 agriculture only under no-till system; (3 crop-livestock integrationcrop-livestock integration; (4 livestock only. These areas were sampled at three soil depths (0-5, 5-10 and 10-15 cm, and soil was stored in plastic pots and taken to a greenhouse, where soil moisture and weight were standardized. Soil was kept near 70% moisture field capacity, being revolved every 20 days when all seedling emerged from soil were counted, identified and collected for dry mass assessment. The soil coverage by weeds, number of weed seedlings and dry mass of the weedy community were assessed. A phytoecological analysis was conducted. Weed composition is differentdifferent among management systems after 16 years. Areas with livestock showed much smaller number of weed species in comparison to systems where only grain crops are grown. The presence of livestock affects the potential of germination of soil seed bank. Agriculture systems are similar in terms of weed composition along soil profile, while systems involving livestock show little relation in what regards such sampled depths. Conservationist models of land exploration contribute to reduce severity of weed species occurrence in the long term.Objetivou-se avaliar o nível de infestação por plantas daninhas em áreas submetidas a manejos distintos por 16 anos: (1 agricultura em sistema convencional de preparo; (2 agricultura em sistema plantio direto; (3 integração lavoura/pecuária; (4 somente pecuária. Amostras de solos destas áreas foram coletadas em três profundidades (0-5, 5-10 and 10-15 cm, depositadas em potes plásticos e levadas a casa de vegetação. O solo era revolvido a cada 20 dias, quando as plantas daninhas presentes eram identificadas e coletadas. Foram
Directory of Open Access Journals (Sweden)
Leonardo Gomes
2006-03-01
Full Text Available Blowflies use discrete, ephemeral breeding sites for larval nutrition. After exhaustion of the food supply, the larvae disperse in search of sites to pupate or to seek other sources of food in a process known as post-feeding larval dispersal. In this study, some of the most important aspects of this process were investigated in larvae of the blowflies Chrysomya megacephala exposed to a variety of light: dark (LD cycles (0:0 h, 12:12 h and 24:0 h and incubated in tubes covered with vermiculite. For each pupa, the body weight and depth of burrowing were determined. Statistical tests were used to examine the relationship of depth of burrowing and body weight to photoperiod at which burrowing occurred. The study of burial behavior in post-feeding larval dispersing can be useful for estimating the postmortem interval (PMI of human corpses in forensic medicine.Moscas-varejeiras usam substratos discretos e efêmeros para nutrição larval. Após a exaustão do suprimento de comida, as larvas dispersam na procura por locais para pupação na outros recursos de alimento em um processo conhecido como dispersão larval pós- alimentar. Nesse estudo, alguns dos aspectos mais importantes desse processo foram investigados em larvas de moscas-varejeiras Chrysomya megacephala expostas a uma variação de ciclos luz: escuro (LD (0:24h, 12:12h e 24:0h e incubadas em tubos cobertos com vermiculita. Para cada pupa, o peso corpóreo e a profundidade de enterramento foram determinados. Testes estatísticos foram usados para examinar a relação entre profundidade de enterramento e o peso corpóreo e o fotoperíodo a que esse enterramento ocorreu. O estudo do comportamento de enterramento na dispersão larval pós-alimentar pode ser útil para estimar o intervalo pós-morte (IPM em cadáveres humanos em medicina forense.
Directory of Open Access Journals (Sweden)
Laercio Duarte Souza
2006-04-01
Full Text Available A citricultura no Nordeste do Brasil está concentrada nos Estados da Bahia e Sergipe, com 106.385 ha de área plantada no agroecossistema dos Tabuleiros Costeiros, onde predominam Latossolos Amarelos, que apresentam horizontes coesos subsuperficiais que se tornam extremamente duros quando secos. Esses horizontes impedem o desenvolvimento das raízes ao longo do perfil, diminuindo o volume de solo explorado e a disponibilidade de água e nutrientes. Para romper a zona de ocorrência da coesão e aumentar o volume de solo ocupado pelas raízes, foram utilizados plantios com profundidades de cova de 0,40; 0,60; 0,80; 1,00 e 1,20 m, com laranjeira 'Valência' enxertada sobre limoeiro 'Volkameriano'. A distribuição das raízes, divididas em quatro diâmetros, apresentou diferenças entre tratamentos. Os melhores resultados ocorreram na linha de plantio para os tratamentos 0,80 m, 1,00 m e 1,20 m.Citros crop in Northeast Brazil is concentrated on states of Bahia and Sergipe, with 106,385 hectares, established in the Coastal Tablelands agricultural ecosystem, where Yellow Latosol prevail, with cohesive horizons that become hard when dry. This problem retains the roots development along the soil profile, decreasing the soil volume explored and consequently the availability of water and nutrients. To solve this problem, breaking the cohesive layer and increasing the volume of roots in the soil, orange tree 'Valência' grafted on lemon tree 'Volkameriano' was planted in several hole depths (0.40; 0.60; 0.80; 1.00 and 1.20 m. The distribution of roots, evaluated in four different diameters, showed differences among the treatments. The best depths were 0.80 m, 1.00 m and 1.20 m.
Eliana Barbosa de Souza
2007-01-01
A presença de microrganismos no interior do sistema de canais radiculares é a principal causa do fracasso na terapia endodôntica. A importância da sanificação durante o preparo do canal fica clara, portanto. Dentre os microrganismos isolados nos casos de insucesso o Enterococcus faecalis é comumente encontrado. O E. faecalis é um microrganismo resistente à terapia endodôntica, à medicação intracanal de hidróxido de cálcio e sua presença contribui para o insucesso em Endodontia. A radiação las...
Directory of Open Access Journals (Sweden)
Aline B. Moreno
2005-03-01
Full Text Available This study aimed to evaluate the water depth selection during foraging, the efficiency in prey capture, and the food items captured by Casmerodius albus (Linnaeus, 1758 and Egretta thula (Molina, 1782. The work was conducted at an urban lagoon, Lagoa Rodrigo de Freitas, Rio de Janeiro. Four transects were made each month (two in the morning and two in the afternoon for six months. When the birds were detected foraging, the water depth and the types of prey captured were recorded. There was no significant relationship between the foraging efficiencies of the two species. However, they differed in relation to the water depth when foraging, and also in the food items captured. Casmerodius albus captured mainly fishes while Egretta thula captured mainly invertebrates. The results suggest that the differences in water depth when foraging and the food items captured allow a differential use of the food resources available by C. albus and E. thula at Lagoa Rodrigo de Freitas.Este estudo teve o objetivo de avaliar a seleção de profundidade durante o forrageamento, a eficiência na captura de presas e os itens alimentares capturados por Casmerodius albus (Linnaeus, 1758 e Egretta thula (Molina, 1782. O trabalho foi realizado em uma lagoa urbana, Lagoa Rodrigo de Freitas. Durante seis meses foram realizadas quatro transecções (duas de manhã e duas à tarde. Quando as aves foram avistadas forrageando, foram registradas a profundidade da água e o tipo de presa capturada. Não foi encontrada relação estatisticamente significativa entre a eficiência de forrageamento para as duas espécies de aves. Entretanto, as espécies diferiram significativamente em relação à profundidade da água durante o forrageamento e também em relação aos itens alimentares capturados. Casmerodius albus capturou principalmente peixes, enquanto E. thula capturou principalmente invertebrados. Os resultados sugerem que diferenças na profundidade da água durante o
Reconocimiento de Gestos usando Cámaras de Profundidad
JHONSON GARCÍA, FIORELLA ANNETH
2017-01-01
El proyecto pretende detectar un repertorio de gestos a partir de nubes de puntos 3D obtenidas con cámaras de profundidad tipo Kinect. Jhonson García, FA. (2017). Reconocimiento de Gestos usando Cámaras de Profundidad. http://hdl.handle.net/10251/91700 TFGM
Directory of Open Access Journals (Sweden)
S.O. Procópio
2001-12-01
Full Text Available Muitas vezes a profundidade de lixiviação dos herbicidas aplicados ao solo afeta a seletividade destes às culturas. O objetivo deste trabalho foi estudar a lixiviação do herbicida s-metolachlor em cinco tipos de solos (Podzólico Vermelho-Amarelo, Latossolo Roxo, Latossolo Vermelho-Amarelo, Areia Quartzosa-turfosa e Areia Quartzosa, bem como avaliar o efeito do manejo das primeiras irrigações antes e após a aplicação do herbicida sobre esse processo, por meio de bioensaios, relacionando os resultados encontrados com possíveis efeitos fitotóxicos ocorridos em algumas culturas comerciais. Os experimentos foram realizados em casa de vegetação, utilizando-se colunas de lixiviação, sendo compostos de oito tratamentos, formados da combinação de dois tipos de irrigação inicial (lâmina de irrigação de 25 mm antes ou depois da aplicação do s-metolachlor com quatro faixas de profundidade de coleta dos solos (0-5, 5-10, 10-15 e 15-20 cm, com cinco tipos de solos. O herbicida s-metolachlor foi pulverizado na dose de 1,92 kg ha-1 em todos os tratamentos, e a planta indicadora utilizada foi o sorgo-granífero (Sorghum bicolor, híbrido BR 304. Observou-se tendência de maior lixiviação e maior disponibilidade do s-metolachlor em todos os solos avaliados quando a irrigação foi realizada após a aplicação do herbicida. Na Areia Quartzosa ocorreu a maior lixiviação e disponibilidade do herbicida. Em todos os solos, o s-metolachlor concentrou-se na camada mais superficial do solo de 0-5 cm. Conclui-se que solos com baixos teor de matéria orgânica e CTC efetiva aumentam a predisposição da ocorrência de efeitos fitotóxicos do s-metolachlor às culturas e a probabilidade de contaminação de águas subterrâneas.The leaching depth of the herbicides applied on the soil often affects their selectivity to crops. This work aimed to study soil mobility of s-metolachlor in five types of soils (Red-yellow Podzolic, Purple Latosol, Red
Directory of Open Access Journals (Sweden)
Ilana Finkelstein
2004-10-01
Full Text Available OBJETIVO: identificar as respostas de freqüência cardíaca (FC, pressão arterial (PA e peso hidrostático (PHem grávidas imersas em diversos pontos anatômicos até o processo xifóide. MÉTODOS: onze gestantes foram submetidas ao seguinte procedimento experimental: 10 minutos em decúbito dorsal, para avaliação da FC e PA no repouso; 2 minutos em pé, para avaliação das medidos iniciais de FC, PA e massa; e um minuto para cada profundidade de imersão. Foram medidos a FC, PA e PH após imersão no nível do tornozelo, joelho, quadril, cicatriz umbilical e processo xifóide. Utilizaram-se estatística descritiva, testes de normalidade de Shapiro-Wilks e homogeneidade de Levene, ANOVA one-way e teste de Bonferroni, com pPURPOSE: to identify the responses of heart rate (HR, blood pressure (BP, and hydrostatic weight (HW in pregnant women immersed up to different anatomic points as far as the xiphoid process. METHODS: eleven pregnant women underwent the following experimental procedure: 10 minutes in recumbent position for evaluation of HR and BP at rest; 2 minutes in standing position for evaluation of initial measures of HR, BP and mass, and one minute for each immersion depth. HR, BP and HW were measured after immersion up to the level of the ankle, knee, hip, navel, and xiphoid process, respectively. Descriptive statistics, test of normality (Shapiro-Wilks, homogeneity of variance test (Levene, one-way ANOVA and the Bonferroni test (SPSS version 8.0 were used, with significance at p<0.05. RESULTS: significant differences were found for HR, diastolic BP and mean BP starting from the xiphoid process (79.1±5.1 bpm; 53.3±6.7 mmHg and 63.9±6.2 mmHg, respectively and for the systolic BP starting from the navel (92.7±11.1 mmHg. Significant differences were seen in all measurements of percent HW reduction, as in previous studies carried out with non-pregnant women. CONCLUSION: the obtained results showed a decrease in HR and BP on water
Directory of Open Access Journals (Sweden)
Valter Antonio Becegato
Full Text Available RESUMO Foram realizados ensaios geofísicos, como caminhamento elétrico (arranjo dipolo-dipolo com AB=MN=4 m, totalizando 1.024 m de perfis, e levantamento gravimétrico, totalizando 273 estações separadas de 4 em 4 m. Os valores máximos, mínimo, médio e desvio padrão da resistividade elétrica real em ohm.m foram, respectivamente: 35, 2.276, 432 e 344. Com relação às anomalias gravimétricas Bouguer, observou-se que a porção oriental é caracterizada por sinais com maiores amplitudes, em contraposição ao segmento ocidental, onde as mesmas são intermediárias a baixas, destacando-se valores mínimos entre as estações 0-44 m das linhas L4, L5 e L6. Detectou-se a presença de hidrocarboneto a 3 m de profundidade, nas linhas L8 e L9. Análises laboratoriais das amostras de solos e água apontaram valores PHAs que excedem os parâmetros estabelecidos pela resolução CONAMA nº 357/2005.
Directory of Open Access Journals (Sweden)
Ludmila Ladeira Alves de Brito
2005-12-01
Full Text Available O potencial da filtração lenta como opção tecnológica para o tratamento de água nos países em desenvolvimento e sua capacidade de remoção de contaminantes, sobretudo patogênicos, são reconhecidos. Contudo, ainda permanece incompleto o conhecimento acerca dos mecanismos que predominantemente atuam na remoção dos microrganismos. Objetivando avançar nessa compreensão, desenvolveu-se uma investigação experimental, em unidades piloto, em filtros lentos de areia com escoamento descendente e ascendente, operados com água sintética e duas taxas de filtração (3 e 6m³/m2.d. A retenção dos microrganismos indicadores foi avaliada em cinco camadas, com 0,15 m de espessura cada, em dois momentos da carreira. A maturidade biológica do leito filtrante foi menos favorecida pela taxa mais alta de filtração e pelo fluxo ascendente. Os 0,45 m iniciais do leito filtrante foram importantes na remoção de microrganismos sob as condições estudadas, mas a remoção não se restringiu a estas camadas, tendo sido observada para todos os indicadores retenção nas camadas de 0,45-0,60 m e de 0,60-0,75 m. A schmutzdecke parece desempenhar papel efetivo na remoção de indicadores microbiológicos apenas quando bem desenvolvida. Há uma indicação de que a camada suporte exerce algum papel na retenção de sólidos e microrganismos no fluxo ascendente.The potential of the slow sand filtration as technological option for drinking-water treatment in developing countries and its capacity of contaminants removal, mainly pathogens, are recognized.However, the knowledge concerning the predominant mechanisms that act in microorganism's removal still remains incomplete. Aiming to advance in the understanding of these themes, an experimental investigation was carried out, working with pilot plants of downflow and upflow slow sand filters, operated with synthetic water and two filtration rates (3 and 6 m³/m².d. The microorganisms indicators removal was
Pedro Juan Torres López
2010-01-01
O estudo do fluxo de água e do transporte escalar em reservatórios hidrelétricos é importante para a determinação da qualidade da água durante as fases iniciais do enchimento e durante a vida útil do reservatório. Neste contexto, um código de elementos finitos paralelo 2D foi implementado para resolver as equações de Navier-Stokes para fluido incompressível acopladas a transporte escalar, utilizando o modelo de programação de troca de mensagens, a fim de realizar simulações em um ambiente de ...
Profundidade e atributos físicos do solo e seus impactos nas raízes de bananeiras
Directory of Open Access Journals (Sweden)
Alan Antônio Miotti
2013-06-01
Full Text Available A bananeira pode ter sua produção prejudicada se cultivada em solos com restrições físicas. O objetivo deste trabalho foi verificar se os atributos físicos de solos rasos comprometem as raízes das plantas de bananeira. O estudo foi realizado na Chapada do Apodi (CE, onde foram comparados solos com duas profundidades efetivas: raso (profundidade aproximada de 0,57 m, mais arenoso e profundo (profundidade aproximada de 1,16 m, mais argiloso e seis profundidades de coleta de solo e de raízes (0-10;10-20;20-30; 30-40; 40-50 e 50-60 cm. Nas amostras de solo, foram determinados os seguintes atributos físicos: curva de retenção de água, densidade do solo, porosidade, granulometria e densidade de partículas. A resistência do solo à penetração (RP foi avaliada no campo, utilizando-se de penetrômetro de impacto, com cinco repetições até 60 cm de profundidade. Para o estudo de raízes, as amostras foram coletadas com sonda e, por meio da análise de imagens de raízes lavadas, foram determinados: comprimento, área e volume total, e classes de diâmetro. O solo mais profundo e argiloso apresentou maior microporosidade e porosidade total, o que contribuiu para maior retenção de água. Valores de densidade do solo e de partículas foram maiores em duas camadas do solo raso, bem como a RP que atingiu o valor de 5,1 MPa. O desenvolvimento das raízes das bananeiras foi favorecido no solo profundo, no qual foram encontradas raízes mais espessas (2,2 a 6,6 mm e mais finas (0,68 a 0,79 mm, contribuindo com a sustentação das plantas e com a absorção de água e nutrientes.
Directory of Open Access Journals (Sweden)
Edna Ursulino Alves
2008-08-01
Full Text Available Juazeiro (Zizyphus joazeiro Mart. é uma árvore brasileira típica dos sertões nordestinos. Endêmica da Caatinga, ela ocorre nos diversos Estados do Nordeste do Brasil e apresenta grande potencial econômico e é importante para a região semi-árida. Assim, este estudo teve como objetivo determinar a melhor profundidade de semeadura para a emergência de plântulas de Zizyphus joazeiro. O experimento foi realizado em casa-de-vegetação, tendo como substrato areia lavada e esterilizada contida em bandejas de plástico, com 4 repetições de 25 unidades de dispersão cada uma, nas seguintes profundidades (um, dois, três, quatro e cinco centímetros. A semeadura de juazeiro em ambiente protegido deve ser feita na profundidade entre 1,0 e 1,6cm, resultando em elevado aproveitamento das unidades de dispersão. A profundidade de 1cm resultou em menor tempo para a germinação total.Zizyphus joazeiro Mart. is a typical Brazilian tree of the northeastern dry lands, being endemic to the Caatinga. It occurs in various states of Northeast Brazil and provides a great economic potential and importance for this semi-arid region. This study had as objective to determine the best sowing depth of Zizyphus joazeiro. In greenhouse sand substratum, with 4 replications of 25 units of dispersion each one, in the following depths (one, too, tree, four and five centimeters. It was ended that the sowing of juazeiro in nursery should be done in the depth of 1.0 to 1.6cm. The depth of 1 cm resulted in smaller time for the total germination.
International Nuclear Information System (INIS)
Morel, Christophe
2001-01-01
Scope of the lecture was the modelling of severe reactor accidents. The PERICLES 2D experiment was compared to CATHARE 3D simulation results considering progression of a quench front inside the reactor core, steam flow rates, heat conduction, cladding temperature. (uke)
Avaliação da profundidade do espaço subaracnoideo com o uso do ultrassom
Directory of Open Access Journals (Sweden)
Alexandre Gnaho
2012-08-01
Full Text Available JUSTIFICATIVA E OBJETIVOS: Avaliar a fidelidade da ecografia para prever a profundidade dos espaços intratecais lombares e epidurais, a fim de limitar o número de tentativas de punção. MÉTODO: 31 pacientes (25 homens e seis mulheres, ASA I ou II participaram deste estudo. A imagem devolvida pelo ultrassom da espinha lombar foi executada no interespaço vertebral L3-L4 em plano transversal. Em seguida, um anestesista não previamente informado executou a anestesia espinal através do ponto previsto como alvo. A distância entre a pele e a parte anterior do flavum ligamentum que é supostamente o limite inferior da profundidade intratecal, ou uma aproximação da profundidade do espaço epidural (ED-US, foi medida por ultrassom sendo comparada com a distância entre a pele e a parte anterior do espaço do flavum ligamentum na agulha (ED-N. RESULTADOS: Os ED-US e os ED-N foram, respectivamente, de 5,15 ± 0,95 cm e de 5,14 ± 0.97 cm; essas distâncias não eram significativamente diferentes (p > 0,0001. A correlação significativa r = 0,982 [CI 95% 0,963-0,992, p > 0,0001] foi observada entre as medidas de ED-US e de ED-N. A análise Bland-Altman mostra uma precisão de 0,18 cm, com limites tolerados de -0,14 cm a -0,58 cm. CONCLUSÕES: Este estudo corrobora a utilidade da ultrassonografia em plano transversal que permite identificar as estruturas anatômicas axiais, podendo fornecer aos médicos informações eficientes para a execução da anestesia espinal.
Activated sludge model No. 2d, ASM2d
DEFF Research Database (Denmark)
Henze, M.
1999-01-01
The Activated Sludge Model No. 2d (ASM2d) presents a model for biological phosphorus removal with simultaneous nitrification-denitrification in activated sludge systems. ASM2d is based on ASM2 and is expanded to include the denitrifying activity of the phosphorus accumulating organisms (PAOs......). This extension of ASM2 allows for improved modeling of the processes, especially with respect to the dynamics of nitrate and phosphate. (C) 1999 IAWQ Published by Elsevier Science Ltd. All rights reserved....
Profundidad del surco gingival en dientes primarios restaurados con coronas de acero cromo
Directory of Open Access Journals (Sweden)
Rubén Muñoz Delgado
2015-01-01
Full Text Available Objetivo: Evaluar la relación entre el ajuste marginal y la profundidad del surco gingival en dientes primarios restaurados con coronas de acero cromo. Métodos: Se midió la profundidad del surco gingival de 114 dientes primarios restaurados con coronas de acero cromo en 67 niños, ambos sexos, de 3 a 6 años de edad de la clínica de Estomatología Pediátrica de la UATx, México. La población en estudio fue dividida en tres grupos: a experimental (n=30, b control (n=8, y c control negativo (n=29. Previo consentimiento informado se tomaron los índices de placa (LöeSilness 1967 e índice gingival en seis superficies; se midió el surco gingival con sonda periodontal y las coronas de acero cromo fueron evaluadas clínica y radiográficamente según su ajuste marginal y longitud cervical. Resultados: Los índices de placa y gingival no mostraron diferencias significativas para los grupos experimental y control negativo. El 34% de las coronas mostraron buen ajuste marginal, 33% un mal ajuste, 10.5% cortas, 7.9% largas y el 14% otro tipo de mal ajuste. La profundidad del surco gingival fue estadísticamente significativa para el primer y segundo molar inferior derechos y en los caninos inferiores (p >0.05; la superficie disto-vestibular presentó la mayor profundidad del surco gingival (2.34 mm, siendo estadísticamente significativa (p>0.05. Conclusiones: La profundidad del surco gingival fue mayor en los dientes rehabilitados con coronas de acero cromo mal ajustadas y sobre contorneadas (largas. La presencia de placa bacteriana y gingivitis estuvo relacionada con las coronas de acero cromo mal ajustadas.
Percepção monocular da profundidade ou relevo na ilusão da máscara côncava na esquizofrenia
Directory of Open Access Journals (Sweden)
Arthur Alves
2014-03-01
Full Text Available Este trabalho foi desenvolvido com o propósito de investigar a percepção monocular da profundidade ou relevo da máscara côncava por 29 indivíduos saudáveis, sete indivíduos com esquizofrenia sob uso de antipsicótico por um período inferior ou igual a quatro semanas e 29 sob uso de antipsicótico por um período superior a quatro semanas. Os três grupos classificaram o reverso de uma máscara policromada em duas situações de iluminação, por cima e por baixo. Os resultados indicaram que a maioria dos indivíduos com esquizofrenia inverteu a profundidade da máscara côncava na condição de observação monocular e perceberam-na como convexa, sendo, portanto, suscetíveis à ilusão da máscara côncava. Os indivíduos com esquizofrenia sob uso de medicação antipsicótica pelo período superior a quatro semanas estimaram a convexidade da máscara côncava iluminada por cima em menor comprimento comparados aos indivíduos saudáveis.
Reconstruction of 3d video from 2d real-life sequences
Directory of Open Access Journals (Sweden)
Eduardo Ramos Diaz
2010-01-01
Full Text Available En este artículo, se propone un método novedoso que permite generar secuencias de video en 3D usando secuencias de video reales en 2D. La reconstrucción de la secuencia de video en 3D se realiza usando el cálculo del mapa de profundidad y la síntesis de anaglifos. El mapa de profundidad es formado usando la técnica de correspondencia estéreo basada en la minimización de la energía de error global a partir de funciones de suavizado. La construcción del anaglifo es realizada usando la alineación del componente de color interpolándolo con el mapa de profundidad previamente formado. Adicionalmente, se emplea la transformación del mapa de profundidad para reducir el rango dinámico de los valores de disparidad, minimizando el efecto fantasma mejorando la preservación de color. Se usaron numerosas secuencias de video a color reales que contienen diferentes tipos de movimientos como traslacional, rotacional, acercamiento, y la combinación de los anteriores, demostrando buen funcionamiento visual de la reconstrucción de secuencias de video en 3D propuesta.
Lectures on 2D gravity and 2D string theory
International Nuclear Information System (INIS)
Ginsparg, P.; Moore, G.
1992-01-01
This report the following topics: loops and states in conformal field theory; brief review of the Liouville theory; 2D Euclidean quantum gravity I: path integral approach; 2D Euclidean quantum gravity II: canonical approach; states in 2D string theory; matrix model technology I: method of orthogonal polynomials; matrix model technology II: loops on the lattice; matrix model technology III: free fermions from the lattice; loops and states in matrix model quantum gravity; loops and states in the C=1 matrix model; 6V model fermi sea dynamics and collective field theory; and string scattering in two spacetime dimensions
2D-hahmoanimaation toteuttamistekniikat
Smolander, Aku
2009-01-01
Opinnäytetyössä tutkitaan erilaisia 2D-hahmoanimaation toteuttamistekniikoita. Aluksi luodaan yleiskatsaus animoinnin historiaan ja tekniikoihin piirtämisestä mallintamiseen. Alkukatsauksen jälkeen tutkitaan 2D-hahmon suunnittelua ja liikkeitä koskevia sääntöjä. Hahmoanimaation liikkeissä huomionarvoisia asioita ovat muun muassa ajastus, liioittelu, ennakointi ja painovoima. Seuraavaksi perehdytään itse 2D-hahmoanimaation toteuttamistekniikoihin. Tavoitteena on selvittää, tutkia ja vertailla ...
HypGrid2D. A 2-d mesh generator
Energy Technology Data Exchange (ETDEWEB)
Soerensen, N N
1998-03-01
The implementation of a hyperbolic mesh generation procedure, based on an equation for orthogonality and an equation for the cell face area is described. The method is fast, robust and gives meshes with good smoothness and orthogonality. The procedure is implemented in a program called HypGrid2D. The HypGrid2D program is capable of generating C-, O- and `H`-meshes for use in connection with the EllipSys2D Navier-Stokes solver. To illustrate the capabilities of the program, some test examples are shown. First a series of C-meshes are generated around a NACA-0012 airfoil. Secondly a series of O-meshes are generated around a NACA-65-418 airfoil. Finally `H`-meshes are generated over a Gaussian hill and a linear escarpment. (au)
Directory of Open Access Journals (Sweden)
Fernando Macías López
Full Text Available Resumen El objetivo de este trabajo fue evaluar el efecto de la profundidad sobre las propiedades en soldaduras de ranura en “V” con varios cordones de relleno. Metal base y electrodos comerciales fueron utilizados (ASTM A36 y AWS E7014 y cuatro diferentes condiciones se utilizaron para desarrollar las soldaduras húmedas como son 10, 20, 30 y 40m de profundidad. Una cámara presurizada con 30 atmósferas de capacidad fue utilizada para simular la profundidad, inundada con agua fresca. Un buzo soldador fue quien realizo las soldaduras. Las propiedades en la sección transversal mediante pruebas de tenacidad CVN (Charpy V-notch, macro ataque y esfuerzo a la tensión fueron determinadas por correlación. Las pruebas mecánicas con mejores resultados se observaron en la condición de 20m de profundidad.
International Nuclear Information System (INIS)
Johnson, J.D.; Lyon, S.P.
1982-04-01
SES2D is an interactive graphics code designed to generate plots of equation of state data from the Los Alamos National Laboratory Group T-4 computer libraries. This manual discusses the capabilities of the code. It describes the prompts and commands and illustrates their use with a sample run
Directory of Open Access Journals (Sweden)
Marcelo Sales de Almeida
2010-06-01
Full Text Available Com o objetivo de avaliar a influência de massa de sementes e profundidades de semeadura sobre o vigor e o desenvolvimento vegetativo de mudas de tamarindeiro (Tamarindus indica L., conduziu-se um experimento em viveiro telado, de malha 0,38 mm², no Setor de Fruticultura da Fazenda Experimental Água Limpa, município de Uberlândia (MG, no período de 26 de dezembro de 2006 a 04 de junho de 2007. O delineamento experimental foi o inteiramente casualizado, com os tratamentos distribuídos em esquema fatorial 2 x 3, com 5 repetições e 5 mudas por parcela, sendo os fatores: duas massas de sementes, leves e pesadas (65,60 g/100 sementes; 94,54 g/100 sementes, respectivamente, e três profundidades de semeadura (1; 2 e 3 cm. Avaliaram-se o número de folhas, diâmetro do caule, altura da muda, comprimento da raiz principal, massas secas da parte aérea e de raízes. Os resultados demonstraram que sementes de maior massa proporcionam melhor desenvolvimento inicial das mudas. E quanto à profundidade de semeadura, não houve diferença significativa entre todas as características avaliadas.The effect of seeds weight and different sowing depths on tamarind (Tamarindus indica L. seedling vigor and vegetative growth was evaluated in a trial done in a screened nursery, with 0.38 mm² opening, at the experimental farm Água Limpa, in a nursery with anti-aphid screens, in the county of Uberlândia. The farm is located at 18º55'33''S and 48º17'19''W, at 872 m altitude, Minas Gerais, from December 26 2006 to June 4 2007. The experimental design was randomized blocks, in a 2 x 3 factorial, with 5 repetitions and 5 plants per plot. The factors were two seeds weight, slight and weighty (65.60 g and 94.54 g respectively, defined according to the weight of 100 seeds and three sowing depths (1cm; 2cm or 3cm. The number of leaves, stem diameter, plant height, root length, fresh and dry weight of roots and above ground matter were evaluated. The results
Computational 2D Materials Database
DEFF Research Database (Denmark)
Rasmussen, Filip Anselm; Thygesen, Kristian Sommer
2015-01-01
We present a comprehensive first-principles study of the electronic structure of 51 semiconducting monolayer transition-metal dichalcogenides and -oxides in the 2H and 1T hexagonal phases. The quasiparticle (QP) band structures with spin-orbit coupling are calculated in the G(0)W(0) approximation...... and used as input to a 2D hydrogenic model to estimate exciton binding energies. Throughout the paper we focus on trends and correlations in the electronic structure rather than detailed analysis of specific materials. All the computed data is available in an open database......., and comparison is made with different density functional theory descriptions. Pitfalls related to the convergence of GW calculations for two-dimensional (2D) materials are discussed together with possible solutions. The monolayer band edge positions relative to vacuum are used to estimate the band alignment...
Reconocimiento facial combinando técnicas 2D y 3D
González Ferreiro, Montserrat
2007-01-01
El propósito del proyecto es permitir combinar imágenes 3D y 2D para realizar un reconocimiento facial automático. Para ello se procesarán las imágenes 3D de profundidad sin textura de la base de datos GavabDB para posteriormente utilizarlas como imágenes de entrenamiento en un sistema de reconocimiento facial que emplee el algoritmo de P2CA (Partial Principal Components Analysis). Las imágenes 3D se procesarán, mediante unos editores programados en Matlab, de manera que fin...
VERTICAL ACTIVITY ESTIMATION USING 2D RADAR
African Journals Online (AJOL)
hennie
estimates on aircraft vertical behaviour from a single 2D radar track. ... Fortunately, the problem of detecting relative vertical motion using a single 2D ..... awareness tools in scenarios where aerial activity sensing is typically limited to 2D.
Fallow), Stray
2009-01-01
Having trouble with geometry? Do Pi, The Pythagorean Theorem, and angle calculations just make your head spin? Relax. With Head First 2D Geometry, you'll master everything from triangles, quads and polygons to the time-saving secrets of similar and congruent angles -- and it'll be quick, painless, and fun. Through entertaining stories and practical examples from the world around you, this book takes you beyond boring problems. You'll actually use what you learn to make real-life decisions, like using angles and parallel lines to crack a mysterious CSI case. Put geometry to work for you, and
International Nuclear Information System (INIS)
Georgi, Howard; Kats, Yevgeny
2008-01-01
We discuss what can be learned about unparticle physics by studying simple quantum field theories in one space and one time dimension. We argue that the exactly soluble 2D theory of a massless fermion coupled to a massive vector boson, the Sommerfield model, is an interesting analog of a Banks-Zaks model, approaching a free theory at high energies and a scale-invariant theory with nontrivial anomalous dimensions at low energies. We construct a toy standard model coupling to the fermions in the Sommerfield model and study how the transition from unparticle behavior at low energies to free particle behavior at high energies manifests itself in interactions with the toy standard model particles
International Nuclear Information System (INIS)
Brekke, L.; Imbo, T.D.
1992-01-01
The authors study the inequivalent quantizations of (1 + 1)-dimensional nonlinear sigma models with space manifold S 1 and target manifold X. If x is multiply connected, these models possess topological solitons. After providing a definition of spin and statistics for these solitons and demonstrating a spin-statistics correlation, we give various examples where the solitons can have exotic statistics. In some of these models, the solitons may obey a generalized version of fractional statistics called ambistatistics. In this paper the relevance of these 2d models to the statistics of vortices in (2 + 1)-dimensional spontaneously broken gauge theories is discussed. The authors close with a discussion concerning the extension of our results to higher dimensions
Waldin, Nicholas
2016-06-24
2D color maps are often used to visually encode complex data characteristics such as heat or height. The comprehension of color maps in visualization is affected by the display (e.g., a monitor) and the perceptual abilities of the viewer. In this paper we present a novel method to measure a user\\'s ability to distinguish colors of a two-dimensional color map on a given monitor. We show how to adapt the color map to the user and display to optimally compensate for the measured deficiencies. Furthermore, we improve user acceptance of the calibration procedure by transforming the calibration into a game. The user has to sort colors along a line in a 3D color space in a competitive fashion. The errors the user makes in sorting these lines are used to adapt the color map to his perceptual capabilities.
Directory of Open Access Journals (Sweden)
Weslley Carlos Dias da Silva
2012-12-01
Full Text Available Em soldagem subaquática molhada, a ocorrência de poros e trincas a frio pode ter um efeito bastante prejudicial nas propriedades mecânicas da junta soldada. O hidrogênio contribui diretamente para o aparecimento destas duas descontinuidades. A quantidade de hidrogênio difusível (Hdif no metal de solda pode ser influenciada por diversos fatores. Todavia, pouco se sabe sobre a influência da profundidade de soldagem (pressão sobre a quantidade de Hdif no metal de solda. Neste trabalho, diversas medições de hidrogênio difusível foram feitas nas profundidades de 0,30 m, 10 m e 20 m e 30 m em soldagem molhada. O consumível utilizado foi o eletrodo comercial E6013 envernizado. As medições de hidrogênio difusível foram feitas através do método da cromatografia. Para medição de porosidade foi utilizado o método macrográfico e um programa analisador de imagem. O hidrogênio residual também foi medido. Os resultados mostraram que o hidrogênio difusível reduziu significativamente com o aumento da pressão hidrostática ao contrário da porosidade, que aumentou com o aumento da pressão hidrostática. Não se observou alterações apreciáveis no hidrogênio residual do metal de solda. Desta forma, é possível concluir que a profundidade de soldagem afeta diversos aspectos da soldagem subaquática molhada, em especial, o hidrogênio difusível e porosidade, conforme foi observado neste trabalho.In underwater wet welding, cold cracking and pores might have a deleterious effect in the mechanical properties of welded joint. The hydrogen might act in the occurrence of theses discontinuities. The amount of diffusible hydrogen in the weld metal can be influenced by several factors. However, not yet known whether the depth of welding (pressure affects the amount of diffusible hydrogen in weld metal. In this work, several measurements of diffusible hydrogen were made at following depth: 0.30 m, 10 m, 20 m and 30 m atwet welding. The
Learn Unity for 2D game development
Thorn, Alan
2013-01-01
The only Unity book specifically covering 2D game development Written by Alan Thorn, experience game developer and author of seven books on game programming Hands-on examples of all major aspects of 2D game development using Unity
Atenuação da intensidade de luz e profundidade de polimerização de resinas compostas
Werlang, Jean Felipe Garlet; Dalfovo, Ricardo João; Neiva, Ivana Froede; Obici, Andresa Carla
2016-01-01
Objetivo: Avaliar a atenuação da luz através de diferentes espessuras de resina composta e a profundidade de polimerização. Materiais e Métodos: Foram utilizadas as resinas Opallis e Llis de esmalte (E) e de dentina (D), na cor A3. Para atenuação da luz foram empregadas matrizes metálicas (6,0mm de diâmetro e espessuras de 0,5, 1,0, 1,5 e 2,0mm), as quais foram posicionadas na janela de leitura do radiômetro e a intensidade de luz medida antes e após a interposição do material. A profundidade...
Distribución a profundidad del carbono orgánico en los suelos de México
Directory of Open Access Journals (Sweden)
Fernando Paz
2016-07-01
Full Text Available La caracterización de la distribución vertical del carbono orgánico en los suelos (COS en México es una tarea importante, dada la evidencia acumulada que muestra que el COS puede ser desestabilizado por diferentes mecanismos al incrementar la profundidad a la que se encuentra en el perfil. Con el objetivo de modelar la variación del COS con la profundidad, se analizó una base de datos de COS de perfiles de suelos distribuidos en todo México (base de datos INEGI-COLPOS. Esta base se depuró usando diferentes restricciones congruentes con el objetivo de desarrollar modelos matemáticos de la distribución del carbono con la profundidad (z. Los resultados de los ajustes estadísticos mostraron que modelo logarítmico, COS(z=a-b ln(z, resultó adecuado para lo planteado, por lo que se procedió a su síntesis. Se usó la propiedad de que un conjunto de rectas que se intersectan en un punto común, sus parámetros generan una línea recta. Con base en ella se desarrolló un esquema para estimar el carbono orgánico inerte (COI del espacio b-a del modelo logarítmico. Adicionalmente, para realizar estimaciones del COS a profundidad (hasta su valor máximo usando sólo el valor del COS de 0 a 30 cm, se desarrolló un método para realizar estas estimaciones a partir de parámetros asociados a los ecosistemas y tipos de vegetación. Los resultados de los ejercicios realizados para estimar el COI y el carbono orgánico a profundidad en los suelo usando sólo el COS 30 cm muestran ser adecuados y pueden ser implementados en forma operativa.
Directory of Open Access Journals (Sweden)
Leandro Pereira Pacheco
2010-10-01
Full Text Available O uso do consórcio entre plantas de cobertura e culturas anuais, no Cerrado, tem sido prática cada vez mais difundida, pela possibilidade de implantação das forrageiras durante o desenvolvimento das culturas anuais, através da diferença de profundidade e sistema de semeadura. Objetivou-se, neste trabalho avaliar a emergência e algumas características agronômicas de quatro espécies de plantas de cobertura, em diferentes profundidades, visando ao seu emprego na consorciação e sobressemeadura em culturas anuais. O experimento foi conduzido em casa-de-vegetação, no delineamento experimental de blocos ao acaso, em arranjo fatorial 4 x 7, composto pelas plantas de cobertura Brachiaria brizantha, B. decumbens, B. ruziziensis e Panicum maximum cv. Tanzânia, e por seis profundidades de semeadura e um sistema de cobertura de sementes (0 sem cobertura, 0 com cobertura, 1, 4, 8, 10 e 15 cm. As sementes foram semeadas em vasos e as plantas cultivadas por 40 dias. Avaliou-se o índice e o tempo de emergência, a altura de plantas, a fitomassa verde e seca da parte aérea, a área foliar, a fitomassa seca radicular e a densidade de comprimento radicular. O maior desenvolvimento das plantas estudadas foi detectado nas semeaduras até 1 cm de profundidade. O P. maximum não apresentou aptidão para uso em consórcio com culturas anuais.Não se recomenda a semeadura das plantas de cobertura a partir de 10 cm.The use of the consortium between cover crops and annual crops in the Cerrado, is an increasingly widespread practice, because of the possibility of deployment of cover crops during the development of annual crops by the difference in depth and seeding system. The objective was to evaluate the emergency and some agronomic characteristics of four species of cover crops at different seeding depths, to use them in consortium and oversown in annual crops. The experiment was conducted in a greenhouse, and the experimental design of randomized blocks
FEM-2D - Input description and performance
International Nuclear Information System (INIS)
Schmidt, F.A.R.
1975-03-01
FEM-2D solves the 2d diffusion equation by the Finite Element Method. This version of the code was written for x-y geometry, triangular elements with first and second order flux approximations, and has a solution routine which is based on a modified Cholesky procedure. FEM-2D is fully integrated into the modular system RSYST. However, we have developed a simulation program RSIMK which simulates some of the functions of RSYST and allows to run FEM-2D independently. (orig.) [de
Annotated Bibliography of EDGE2D Use
Energy Technology Data Exchange (ETDEWEB)
J.D. Strachan and G. Corrigan
2005-06-24
This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables.
2D NMR studies of biomolecules
International Nuclear Information System (INIS)
Lamerichs, R.M.J.N.
1989-01-01
The work described in this thesis comprises two related subjects. The first part describes methods to derive high-resolution structures of proteins in solution using two-dimensional (2-D) NMR. The second part describes 2-D NMR studies on the interaction between proteins and DNA. (author). 261 refs.; 52 figs.; 23 tabs
DEFF Research Database (Denmark)
Cronin-Fenton, Deirdre P.; Damkier, Per
2018-01-01
Tamoxifen reduces the rate of breast cancer recurrence by about one-half. It is converted to more active metabolites by enzymes encoded by polymorphic genes, including cytochrome P450 2D6 (CYP2D6) and transported by ATP-binding cassette transporters. Genetic polymorphisms that confer reduced CYP2...
Annotated Bibliography of EDGE2D Use
International Nuclear Information System (INIS)
Strachan, J.D.; Corrigan, G.
2005-01-01
This annotated bibliography is intended to help EDGE2D users, and particularly new users, find existing published literature that has used EDGE2D. Our idea is that a person can find existing studies which may relate to his intended use, as well as gain ideas about other possible applications by scanning the attached tables
Estimativa da profundidade de carbonatação do concreto com o uso de redes neurais
Carlos Alberto Cavalcanti Martins
2011-01-01
O fenômeno da carbonatação, como agente desencadeador do processo de corrosão de armaduras, assume especial importância quando as estruturas de concreto armado estão expostas a ambientes urbanos e à atmosfera poluída de gases como o CO2. O controle da profundidade de carbonatação do concreto exige o uso de ferramentas (modelos matemáticos) que representem o comportamento das variáveis que interagem no processo da carbonatação do concreto de forma clara e objetiva no sentido de auxiliar ...
Veranes-Pantoja, Yaimarilis; Autran-Mateu, Fernando; Álvarez-Brito, Rubén; Gil-Mur, Francisco Javier
2005-01-01
En el presente trabajo se estudian la resistencia a la compresión, módulo en compresión, resistencia a la compresión diametral, dureza, desgaste y profundidad de curado de seis formulaciones de composites dentales fotopolimerizables. Los composites fueron preparados usando como matrices combinaciones de Bis-GMA/DMATEEG, Bis-GMA/MPS, Bis-GMA/DMATEEG/MPS. Como relleno se utilizó cuarzo del yacimiento "El Cacahual" y la combinación de cuarzo/aerosil 200. La resina VenusTM Heraus Kulzer fue utili...
Light field morphing using 2D features.
Wang, Lifeng; Lin, Stephen; Lee, Seungyong; Guo, Baining; Shum, Heung-Yeung
2005-01-01
We present a 2D feature-based technique for morphing 3D objects represented by light fields. Existing light field morphing methods require the user to specify corresponding 3D feature elements to guide morph computation. Since slight errors in 3D specification can lead to significant morphing artifacts, we propose a scheme based on 2D feature elements that is less sensitive to imprecise marking of features. First, 2D features are specified by the user in a number of key views in the source and target light fields. Then the two light fields are warped view by view as guided by the corresponding 2D features. Finally, the two warped light fields are blended together to yield the desired light field morph. Two key issues in light field morphing are feature specification and warping of light field rays. For feature specification, we introduce a user interface for delineating 2D features in key views of a light field, which are automatically interpolated to other views. For ray warping, we describe a 2D technique that accounts for visibility changes and present a comparison to the ideal morphing of light fields. Light field morphing based on 2D features makes it simple to incorporate previous image morphing techniques such as nonuniform blending, as well as to morph between an image and a light field.
An observational study of Venlafaxine and CYP2D6 in clinical practice.
Rolla, R; Gramaglia, Carla; Dalò, Valentina; Ressico, Francesca; Prosperini, Pierluigi; Vidali, Matteo; Meola, Silvia; Pollarolo, Paola; Bellomo, Giorgio; Torre, Eugenio; Zeppegno, Patrizia
2014-01-01
Venlafaxine (V) is a serotonin-norepinephrine selective reuptake inhibitor, mainly metabolized by cytochrome P4502D6 (CYP2D6). CYP2D6 polymorphisms result in a variety of phenotypes: poor (PMs), intermediate (IMs), extensive (EMs), and ultrarapid metabolizers (UMs). PMs usually show poor tolerance to drugs metabolized by CYP2D6, while UMs need greater doses. The aim of this study was to evaluate the impact of CYP2D6 genotype on V dosage, therapeutic response, and side effects in a clinical outpatient setting. 47 patients with Major Depressive Disorder, treated with V 75 - 300 mg/day, underwent CYP2D6 genotyping using the INFINITI-CYP2D6 assay. Duration of treatment and clinical outcome (Clinical Global Impression [CGI] effectiveness index) were assessed. CGI assessment was performed after 6 weeks, 6 months, and 1 year of treatment with a V median dose of 150 mg/day. CYP2D6 genotyping resulted in 1 PM, 3 IMs, 42 EMs, and 1 UM. The UM took the greatest V dose (375 mg) without side effects; IMs/PMs took moderate/high doses of V (150 - 300 mg) without adverse effects; EMs displayed high response variability. PM/IM patients responded to V differently than expected according to genotype. However, the UM patient responded to a dosage higher than the usual therapeutic range and without developing side effects, suggesting an association between CYP2D6 gene duplication and the therapeutic efficacy of venlafaxine. The CYP2D6 genotyping may thus provide clinicians with a potential explanation for those patients requiring greater doses of CYP2D6 substrates in order to obtain the same therapeutic efficacy.
Elena Purcaru; Cristian Toma
2011-01-01
The paper presents a solution for endcoding/decoding DNA information in 2D barcodes. First part focuses on the existing techniques and symbologies in 2D barcodes field. The 2D barcode PDF417 is presented as starting point. The adaptations and optimizations on PDF417 and on DataMatrix lead to the solution - DNA2DBC - DeoxyriboNucleic Acid Two Dimensional Barcode. The second part shows the DNA2DBC encoding/decoding process step by step. In conclusions are enumerated the most important features ...
Santos, Rute Maria Veredas dos
2016-01-01
Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz Objetivo: Avaliar e comparar a profundidade de polimerização e microdureza de compósitos bulk fill fotopolimerizáveis e de dupla-polimerização em diferentes períodos de tempo. Materiais e métodos: Confecionaram-se 25 amostras (n=25) para os compósitos fotopolimerizáveis Filtek™ Z250 (3M), Filtek™ Bulk Fill (3M), SonicFill™ 2 (Kerr) e x-tra fil (VOCO); n=40 para o compósito de dupla-polimeri...
Hybridized Plasmons in 2D Nanoslits: From Graphene to Anisotropic 2D Materials
DEFF Research Database (Denmark)
Gonçalves, P. A. D.; Xiao, Sanshui; Peres, N. M. R.
2017-01-01
of arbitrary width, and remains valid irrespective of the 2D conductive material (e.g., doped graphene, 2D transition metal dichalcogenides, or phosphorene). We derive the dispersion relation of the hybrid modes of a 2D nanoslit along with the corresponding induced potential and electric field distributions...
International Nuclear Information System (INIS)
Ginsparg, P.
1991-01-01
These are introductory lectures for a general audience that give an overview of the subject of matrix models and their application to random surfaces, 2d gravity, and string theory. They are intentionally 1.5 years out of date
A companion matrix for 2-D polynomials
International Nuclear Information System (INIS)
Boudellioua, M.S.
1995-08-01
In this paper, a matrix form analogous to the companion matrix which is often encountered in the theory of one dimensional (1-D) linear systems is suggested for a class of polynomials in two indeterminates and real coefficients, here referred to as two dimensional (2-D) polynomials. These polynomials arise in the context of 2-D linear systems theory. Necessary and sufficient conditions are also presented under which a matrix is equivalent to this companion form. (author). 6 refs
Applications of 2D helical vortex dynamics
DEFF Research Database (Denmark)
Okulov, Valery; Sørensen, Jens Nørkær
2010-01-01
In the paper, we show how the assumption of helical symmetry in the context of 2D helical vortices can be exploited to analyse and to model various cases of rotating flows. From theory, examples of three basic applications of 2D dynamics of helical vortices embedded in flows with helical symmetry...... of the vorticity field are addressed. These included some of the problems related to vortex breakdown, instability of far wakes behind rotors and vortex theory of ideal rotors....
2d index and surface operators
International Nuclear Information System (INIS)
Gadde, Abhijit; Gukov, Sergei
2014-01-01
In this paper we compute the superconformal index of 2d (2,2) supersymmetric gauge theories. The 2d superconformal index, a.k.a. flavored elliptic genus, is computed by a unitary matrix integral much like the matrix integral that computes the 4d superconformal index. We compute the 2d index explicitly for a number of examples. In the case of abelian gauge theories we see that the index is invariant under flop transition and under CY-LG correspondence. The index also provides a powerful check of the Seiberg-type duality for non-abelian gauge theories discovered by Hori and Tong. In the later half of the paper, we study half-BPS surface operators in N=2 superconformal gauge theories. They are engineered by coupling the 2d (2,2) supersymmetric gauge theory living on the support of the surface operator to the 4d N=2 theory, so that different realizations of the same surface operator with a given Levi type are related by a 2d analogue of the Seiberg duality. The index of this coupled system is computed by using the tools developed in the first half of the paper. The superconformal index in the presence of surface defect is expected to be invariant under generalized S-duality. We demonstrate that it is indeed the case. In doing so the Seiberg-type duality of the 2d theory plays an important role
Orthotropic Piezoelectricity in 2D Nanocellulose.
García, Y; Ruiz-Blanco, Yasser B; Marrero-Ponce, Yovani; Sotomayor-Torres, C M
2016-10-06
The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V -1 , ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.
Automatic Contour Extraction from 2D Image
Directory of Open Access Journals (Sweden)
Panagiotis GIOANNIS
2011-03-01
Full Text Available Aim: To develop a method for automatic contour extraction from a 2D image. Material and Method: The method is divided in two basic parts where the user initially chooses the starting point and the threshold. Finally the method is applied to computed tomography of bone images. Results: An interesting method is developed which can lead to a successful boundary extraction of 2D images. Specifically data extracted from a computed tomography images can be used for 2D bone reconstruction. Conclusions: We believe that such an algorithm or part of it can be applied on several other applications for shape feature extraction in medical image analysis and generally at computer graphics.
Orthotropic Piezoelectricity in 2D Nanocellulose
García, Y.; Ruiz-Blanco, Yasser B.; Marrero-Ponce, Yovani; Sotomayor-Torres, C. M.
2016-10-01
The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V-1, ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.
Explorative analysis of 2D color maps
Steiger, Martin; Bernard, Jürgen; Thum, Simon; Mittelstädt, Sebastian; Hutter, Marco; Keim, Daniel A.; Kohlhammer, Jörn
2015-01-01
Color is one of the most important visual variables in information visualization. In many cases, two-dimensional information can be color-coded based on a 2D color map. A variety of color maps as well as a number of quality criteria for the use of color have been presented. The choice of the best color map depends on the analytical task users intend to perform and the design space in choosing an appropriate 2D color map is large. In this paper, we present the ColorMap-Explorer, a visual-inter...
Aircraft height estimation using 2-D radar
CSIR Research Space (South Africa)
Hakl, H
2010-01-01
Full Text Available A method to infer height information from an aircraft tracked with a single 2-D search radar is presented. The method assumes level flight in the target aircraft and a good estimate of the speed of the aircraft. The method yields good results...
2D PIM Simulation Based on COMSOL
DEFF Research Database (Denmark)
Wang, Xinbo; Cui, Wanzhao; Wang, Jingyu
2011-01-01
Passive intermodulation (PIM) is a problematic type of nonlinear distortion en- countered in many communication systems. To analyze the PIM distortion resulting from ma- terial nonlinearity, a 2D PIM simulation method based on COMSOL is proposed in this paper. As an example, a rectangular wavegui...
2-D model for electrokinetic remediation
Energy Technology Data Exchange (ETDEWEB)
Rodriguez Maroto, J.M.; Garcia Delgado, R.A.; Gomez Lahoz, C.; Garcia Herruzo, F. [Dept. de Ingenieria Quimica, Univ. de Malaga (Spain); Vereda Alonso, C. [Dept. de Ingenieria Quimica, Univ. de Malaga (Spain)]|[Inst. for Geologi and Geoteknik, Danmarks Tekniske Univ., Lyngby (Denmark)
2001-07-01
A simple two-dimensional numerical model is presented in this work. In this case, the model is used to examine the enhanced method of the electrokinetic remediation technique in a 2-D arrangement. Nevertheless the model with minor changes can also be used to study the effect of the electrode configuration in the performance of this technique. (orig.)
Small polarons in 2D perovskites
Cortecchia, Daniele
2017-11-02
We demonstrate that white light luminescence in two-dimensional (2D) perovskites stems from photoinduced formation of small polarons confined at specific sites of the inorganic framework in the form of self-trapped electrons and holes. We discuss their application in white light emitting devices and X-ray scintillators.
Small polarons in 2D perovskites
Cortecchia, Daniele; Yin, Jun; Birowosuto, Muhammad D.; Lo, Shu-Zee A.; Gurzadyan, Gagik G.; Bruno, Annalisa; Bredas, Jean-Luc; Soci, Cesare
2017-01-01
We demonstrate that white light luminescence in two-dimensional (2D) perovskites stems from photoinduced formation of small polarons confined at specific sites of the inorganic framework in the form of self-trapped electrons and holes. We discuss their application in white light emitting devices and X-ray scintillators.
Adsorção de nitrato em solos de cerrado do Distrito Federal
Directory of Open Access Journals (Sweden)
OLIVEIRA JULIANA RIBEIRO ALEXANDRE DE
2000-01-01
Full Text Available Os objetivos deste trabalho foram verificar a adsorção de nitrato e identificar as propriedades do solo que mais influenciam este fenômeno, em um Latossolo Vermelho-Escuro, com 56% de argila, em Planaltina, DF. Em 1996 foram coletadas amostras de solo nas profundidades de 0-20, 20-40, 40-80, 80-100 cm, de um experimento com cinco anos de duração, em uma área de cerrado típico e em duas áreas cultivadas com soja e milho, onde o solo apresentava inversão de carga em profundidade. Também foram coletadas amostras em um solo sob cerradão, com carga elétrica líquida negativa em profundidade. A relação entre nitrato adsorvido e nitrato na solução foi descrita pela equação de Freundlich e as relações entre o nitrato adsorvido e algumas propriedades físico-químicas do solo foram estudadas por meio de regressões múltiplas. O nitrato adsorvido aumentou com a profundidade em todos os tratamentos. Esta adsorção foi maior nos solos sob cerrado e cerradão. O deltapH não afetou a adsorção de nitrato. A correlação entre nitrato adsorvido, matéria orgânica e sulfato extraível foi negativa. A adsorção de nitrato aumentou com a redução da matéria orgânica em profundidade e com a redução de sulfato extraível.
Application of 2D Non-Graphene Materials and 2D Oxide Nanostructures for Biosensing Technology
Directory of Open Access Journals (Sweden)
Kateryna Shavanova
2016-02-01
Full Text Available The discovery of graphene and its unique properties has inspired researchers to try to invent other two-dimensional (2D materials. After considerable research effort, a distinct “beyond graphene” domain has been established, comprising the library of non-graphene 2D materials. It is significant that some 2D non-graphene materials possess solid advantages over their predecessor, such as having a direct band gap, and therefore are highly promising for a number of applications. These applications are not limited to nano- and opto-electronics, but have a strong potential in biosensing technologies, as one example. However, since most of the 2D non-graphene materials have been newly discovered, most of the research efforts are concentrated on material synthesis and the investigation of the properties of the material. Applications of 2D non-graphene materials are still at the embryonic stage, and the integration of 2D non-graphene materials into devices is scarcely reported. However, in recent years, numerous reports have blossomed about 2D material-based biosensors, evidencing the growing potential of 2D non-graphene materials for biosensing applications. This review highlights the recent progress in research on the potential of using 2D non-graphene materials and similar oxide nanostructures for different types of biosensors (optical and electrochemical. A wide range of biological targets, such as glucose, dopamine, cortisol, DNA, IgG, bisphenol, ascorbic acid, cytochrome and estradiol, has been reported to be successfully detected by biosensors with transducers made of 2D non-graphene materials.
2D-deformaatio-animaatio peligrafiikassa
Falck, Tia
2017-01-01
Opinnäytetyössä tavoitteena oli esitellä deformaatio-animaation hyötyjä peligrafiikassa. Esimerkillisenä pelinä käytettiin pääasiassa Vanillawaren Dragon’s Crownian, koska siinä yhdistyvät perinteinen sprite sheet -animaatiota käyttävä peligrafiikka ja animaatiotyyli, jonka pystyisi tekemään helpommin kokonaan 2D-mesh-deformaatiota ja luurankoanimaatiota käyttäen. Projektityön osuudessa käytiin läpi animoidun 2D-hahmon työvaiheet kahdessa eri ohjelmassa, joissa molemmissa pystyi teke...
Flexible 2D layered material junctions
Balabai, R.; Solomenko, A.
2018-03-01
Within the framework of the methods of the electron density functional and the ab initio pseudopotential, we have obtained the valence electron density spatial distribution, the densities of electron states, the widths of band gaps, the charges on combined regions, and the Coulomb potentials for graphene-based flexible 2D layered junctions, using author program complex. It is determined that the bending of the 2D layered junctions on the angle α leads to changes in the electronic properties of these junctions. In the graphene/graphane junction, there is clear charge redistribution with different signs in the regions of junctions. The presence in the heterojunctions of charge regions with different signs leads to the formation of potential barriers. The greatest potential jump is in the graphene/fluorographene junction. The greatest value of the band gap width is in the graphene/graphane junction.
Smith, Greg; Lankshear, Allan
1998-07-01
2dF is a multi-object instrument mounted at prime focus at the AAT capable of spectroscopic analysis of 400 objects in a single 2 degree field. It also prepares a second 2 degree 400 object field while the first field is being observed. At its heart is a high precision robotic positioner that places individual fiber end magnetic buttons on one of two field plates. The button gripper is carried on orthogonal gantries powered by linear synchronous motors and contains a TV camera which precisely locates backlit buttons to allow placement in user defined locations to 10 (mu) accuracy. Fiducial points on both plates can also be observed by the camera to allow repeated checks on positioning accuracy. Field plates rotate to follow apparent sky rotation. The spectrographs both analyze light from the 200 observing fibers each and back- illuminate the 400 fibers being re-positioned during the observing run. The 2dF fiber position and spectrograph system is a large and complex instrument located at the prime focus of the Anglo Australian Telescope. The mechanical design has departed somewhat from the earlier concepts of Gray et al, but still reflects the audacity of those first ideas. The positioner is capable of positioning 400 fibers on a field plate while another 400 fibers on another plate are observing at the focus of the telescope and feeding the twin spectrographs. When first proposed it must have seemed like ingenuity unfettered by caution. Yet now it works, and works wonderfully well. 2dF is a system which functions as the result of the combined and coordinated efforts of the astronomers, the mechanical designers and tradespeople, the electronic designers, the programmers, the support staff at the telescope, and the manufacturing subcontractors. The mechanical design of the 2dF positioner and spectrographs was carried out by the mechanical engineering staff of the AAO and the majority of the manufacture was carried out in the AAO workshops.
Design of 2-D rational digital filters
International Nuclear Information System (INIS)
Harris, D.B
1981-01-01
A novel 2-D rational filter design technique is presented which makes use of a reflection coefficient function (RCF) representation for the filter transfer function. The design problem is formulated in the frequency domain. A least-square error criterion is used though the usual error measure is augmented with barrier functions. These act to restrict the domain of approximation to the set of stable filters. Construction of suitable barrier functions is facilitated by the RCF characterization
Quasiparticle interference in unconventional 2D systems.
Chen, Lan; Cheng, Peng; Wu, Kehui
2017-03-15
At present, research of 2D systems mainly focuses on two kinds of materials: graphene-like materials and transition-metal dichalcogenides (TMDs). Both of them host unconventional 2D electronic properties: pseudospin and the associated chirality of electrons in graphene-like materials, and spin-valley-coupled electronic structures in the TMDs. These exotic electronic properties have attracted tremendous interest for possible applications in nanodevices in the future. Investigation on the quasiparticle interference (QPI) in 2D systems is an effective way to uncover these properties. In this review, we will begin with a brief introduction to 2D systems, including their atomic structures and electronic bands. Then, we will discuss the formation of Friedel oscillation due to QPI in constant energy contours of electron bands, and show the basic concept of Fourier-transform scanning tunneling microscopy/spectroscopy (FT-STM/STS), which can resolve Friedel oscillation patterns in real space and consequently obtain the QPI patterns in reciprocal space. In the next two parts, we will summarize some pivotal results in the investigation of QPI in graphene and silicene, in which systems the low-energy quasiparticles are described by the massless Dirac equation. The FT-STM experiments show there are two different interference channels (intervalley and intravalley scattering) and backscattering suppression, which associate with the Dirac cones and the chirality of quasiparticles. The monolayer and bilayer graphene on different substrates (SiC and metal surfaces), and the monolayer and multilayer silicene on a Ag(1 1 1) surface will be addressed. The fifth part will introduce the FT-STM research on QPI in TMDs (monolayer and bilayer of WSe 2 ), which allow us to infer the spin texture of both conduction and valence bands, and present spin-valley coupling by tracking allowed and forbidden scattering channels.
Thermodynamics of 2D string theory
International Nuclear Information System (INIS)
Alexandrov, Sergei Yu.; V.A. Fock Department of Theoretical Physics, St. Petersburg University
2003-01-01
We calculate the free energy, energy and entropy in the matrix quantum mechanical formulation of 2D string theory in a background strongly perturbed by tachyons with the imaginary minkowskian momentum ±i/R ('Sine-Liouville' theory). The system shows a thermodynamical behaviour corresponding to the temperature T={1/(2π R)}. We show that the microscopically calculated energy of the system satisfies the usual thermodynamical relations and leads to a non-zero entropy. (author)
2D materials: Graphene and others
Energy Technology Data Exchange (ETDEWEB)
Bansal, Suneev Anil, E-mail: suneev@gmail.com; Singh, Amrinder Pal [Deptt. of Mech Engg, UIET, Panjab University, Chandigarh (India); Kumar, Suresh [Deptt. of Applied Sciences, UIET, Panjab University, Chandigarh (India)
2016-05-06
Present report reviews the recent advancements in new atomically thick 2D materials. Materials covered in this review are Graphene, Silicene, Germanene, Boron Nitride (BN) and Transition metal chalcogenides (TMC). These materials show extraordinary mechanical, electronic and optical properties which make them suitable candidates for future applications. Apart from unique properties, tune-ability of highly desirable properties of these materials is also an important area to be emphasized on.
Simulation of 2D Granular Hopper Flow
Li, Zhusong; Shattuck, Mark
2012-02-01
Jamming and intermittent granular flow are big problems in industry, and the vertical hopper is a canonical example of these difficulties. We simulate gravity driven flow and jamming of 2D disks in a vertical hopper and compare with identical companion experiments presented in this session. We measure and compare the flow rate and probability for jamming as a function of particle properties and geometry. We evaluate the ability of standard Hertz-Mindlin contact mode to quantitatively predict the experimental flow.
Realistic and efficient 2D crack simulation
Yadegar, Jacob; Liu, Xiaoqing; Singh, Abhishek
2010-04-01
Although numerical algorithms for 2D crack simulation have been studied in Modeling and Simulation (M&S) and computer graphics for decades, realism and computational efficiency are still major challenges. In this paper, we introduce a high-fidelity, scalable, adaptive and efficient/runtime 2D crack/fracture simulation system by applying the mathematically elegant Peano-Cesaro triangular meshing/remeshing technique to model the generation of shards/fragments. The recursive fractal sweep associated with the Peano-Cesaro triangulation provides efficient local multi-resolution refinement to any level-of-detail. The generated binary decomposition tree also provides efficient neighbor retrieval mechanism used for mesh element splitting and merging with minimal memory requirements essential for realistic 2D fragment formation. Upon load impact/contact/penetration, a number of factors including impact angle, impact energy, and material properties are all taken into account to produce the criteria of crack initialization, propagation, and termination leading to realistic fractal-like rubble/fragments formation. The aforementioned parameters are used as variables of probabilistic models of cracks/shards formation, making the proposed solution highly adaptive by allowing machine learning mechanisms learn the optimal values for the variables/parameters based on prior benchmark data generated by off-line physics based simulation solutions that produce accurate fractures/shards though at highly non-real time paste. Crack/fracture simulation has been conducted on various load impacts with different initial locations at various impulse scales. The simulation results demonstrate that the proposed system has the capability to realistically and efficiently simulate 2D crack phenomena (such as window shattering and shards generation) with diverse potentials in military and civil M&S applications such as training and mission planning.
Engineering light outcoupling in 2D materials
Lien, Derhsien
2015-02-11
When light is incident on 2D transition metal dichalcogenides (TMDCs), it engages in multiple reflections within underlying substrates, producing interferences that lead to enhancement or attenuation of the incoming and outgoing strength of light. Here, we report a simple method to engineer the light outcoupling in semiconducting TMDCs by modulating their dielectric surroundings. We show that by modulating the thicknesses of underlying substrates and capping layers, the interference caused by substrate can significantly enhance the light absorption and emission of WSe2, resulting in a ∼11 times increase in Raman signal and a ∼30 times increase in the photoluminescence (PL) intensity of WSe2. On the basis of the interference model, we also propose a strategy to control the photonic and optoelectronic properties of thin-layer WSe2. This work demonstrates the utilization of outcoupling engineering in 2D materials and offers a new route toward the realization of novel optoelectronic devices, such as 2D LEDs and solar cells.
Engineering light outcoupling in 2D materials
Lien, Derhsien; Kang, Jeongseuk; Amani, Matin; Chen, Kevin; Tosun, Mahmut; Wang, Hsinping; Roy, Tania; Eggleston, Michael S.; Wu, Ming C.; Dubey, Madan; Lee, Sichen; He, Jr-Hau; Javey, Ali
2015-01-01
When light is incident on 2D transition metal dichalcogenides (TMDCs), it engages in multiple reflections within underlying substrates, producing interferences that lead to enhancement or attenuation of the incoming and outgoing strength of light. Here, we report a simple method to engineer the light outcoupling in semiconducting TMDCs by modulating their dielectric surroundings. We show that by modulating the thicknesses of underlying substrates and capping layers, the interference caused by substrate can significantly enhance the light absorption and emission of WSe2, resulting in a ∼11 times increase in Raman signal and a ∼30 times increase in the photoluminescence (PL) intensity of WSe2. On the basis of the interference model, we also propose a strategy to control the photonic and optoelectronic properties of thin-layer WSe2. This work demonstrates the utilization of outcoupling engineering in 2D materials and offers a new route toward the realization of novel optoelectronic devices, such as 2D LEDs and solar cells.
Estimación de profundidades del Complejo Plutónico Navarrete mediante procesamiento gravimétrico
Directory of Open Access Journals (Sweden)
Flavia A Croce
2009-06-01
Full Text Available Se presenta el estudio gravimétrico en la región noreste del macizo de Somuncurá provincia de Río Negro con el objetivo de modelar la geometría y estimar las máximas profundidades del Complejo Plutónico Navarrete, emplazado en corteza superior. A la carta de anomalías de Bouguer se la filtró con el objeto de separar dichas anomalías en anomalía regional (que responde a características corticales profundas y anomalía residual (la cual contiene efectos de masas locales y cercanas a la superficie. Para ello se optó por el método de prolongación ascendente de campos potenciales, ya que en un estudio cualitativo fue el más apropiado para la resolución de dicho problema en particular. El afloramiento oeste del Complejo Plutónico Navarrete muestra un valor positivo de anomalía de gravedad de +5 mGal. Por el contrario el afloramiento este de dicho granito, presenta valores negativos entre -5 y -10 mGal. A partir del espectro de frecuencia radial aplicado a la carta de anomalías residuales de Bouguer, se estimaron las máximas profundidades de los afloramientos este y oeste del complejo intrusivo Navarrete, con valores de 8 km y de 6,5 km respectivamente.A gravimetric study is presented in the northeast region of the Somuncurá massif, with the objective of analyzing the geometry and maximum depths of the Navarrete Plutonic Complex, located in the upper crust. A Bouguer anomaly map was filtered in order to separating these anomalies in regional anomaly (which should contain the effects of deep crustal features and residual anomaly (which should contain the effects of local and near surface masses. The process used was the upward continuation method of the potential field. As a result, the west Navarrete granite formation shows a positive value of +5 mGal for gravity anomalies. On the contrary, the east Navarrete granite formation presents negative values between -5 and -10 mGal. A two dimensional power spectrum was applied to the
Defensa en profundidad para la evaluación de riesgos laborales por ruido en termoeléctrica
Directory of Open Access Journals (Sweden)
Roani Ladislá Miranda Cuéllar
2015-09-01
Full Text Available Introducción: Las técnicas de evaluación de riesgos laborales se llevan a cabo por diferentes procedimientos, a través de las aplicaciones de métodos normativos del cumplimiento de los parámetros asociados con las mediciones de los umbrales de daño a la salud del hombre. Sin embargo, no se tienen en cuenta los principios básicos de seguridad, que incluyen las experiencias de buenas prácticas en industrias de altos requisitos de seguridad y disponibilidad. Objetivos: El objetivo de este artículo es proponer un método bajo el enfoque de defensa en profundidad para evaluar los riesgos laborales por ruido en la Central Termoeléctrica (CTE de 100 MW. Material y Métodos: Se aplicó la técnica de entrevistas a técnicos y especialistas en seguridad y salud del trabajo, así como tecnólogos para explorar los elementos que tomaban en cuenta en la evaluación de los riesgos laborales por ruido, y se realizó la consulta a especialistas para precisar los elementos que debían formar parte de los aspectos de seguridad de acuerdo al método propuesto. Además Se realizó la evaluación de los riesgos laborales por ruido de acuerdo a dos metodologías implementadas con anterioridad y la propuesta. Resultados: Se muestran de acuerdo a las tres metodologías. Se determinó que la generación de ruidos no es un aspecto significativo a tener en cuenta, para la metodología 1, se evidenció una dispersión del nivel sonoro, con tendencia estable a los valores máximos en determinadas áreas según la Norma Cubana de ruido, para la metodología 2 mientras que para la metodología 3, los aspectos de seguridad evaluados negativamente por cada escalón, son los que se requieren tomar medidas correctivas dirigidas a modificar los ítems calificados negativamente a positivos para elevar el nivel de seguridad. Conclusiones: La evaluación empleando escalones de defensa en profundidad aplicado a los riesgos laborales posibilita un análisis con el enfoque
From 2D to 3D turbulence through 2D3C configurations
Buzzicotti, Michele; Biferale, Luca; Linkmann, Moritz
2017-11-01
We study analytically and numerically the geometry of the nonlinear interactions and the resulting energy transfer directions of 2D3C flows. Through a set of suitably designed Direct Numerical Simulations we also study the coupling between several 2D3C flows, where we explore the transition between 2D and fully 3D turbulence. In particular, we find that the coupling of three 2D3C flows on mutually orthogonal planes subject to small-scale forcing leads to a stationary 3D out-of-equilibrium dynamics at the energy containing scales where the inverse cascade is directly balanced by a forward cascade carried by a different subsets of interactions. ERC AdG Grant No 339032 NewTURB.
2D non-separable linear canonical transform (2D-NS-LCT) based cryptography
Zhao, Liang; Muniraj, Inbarasan; Healy, John J.; Malallah, Ra'ed; Cui, Xiao-Guang; Ryle, James P.; Sheridan, John T.
2017-05-01
The 2D non-separable linear canonical transform (2D-NS-LCT) can describe a variety of paraxial optical systems. Digital algorithms to numerically evaluate the 2D-NS-LCTs are not only important in modeling the light field propagations but also of interest in various signal processing based applications, for instance optical encryption. Therefore, in this paper, for the first time, a 2D-NS-LCT based optical Double-random- Phase-Encryption (DRPE) system is proposed which offers encrypting information in multiple degrees of freedom. Compared with the traditional systems, i.e. (i) Fourier transform (FT); (ii) Fresnel transform (FST); (iii) Fractional Fourier transform (FRT); and (iv) Linear Canonical transform (LCT), based DRPE systems, the proposed system is more secure and robust as it encrypts the data with more degrees of freedom with an augmented key-space.
Estructura en profundidad del granito de Pozo de la Serna (Ciudad Real en base a datos gravimétricos
Directory of Open Access Journals (Sweden)
Bergamín, J. F.
1985-12-01
Full Text Available It has been done a 16 Km 1ength gravimetric outline with E-W trend and 44 gravity readings above granitic outcrop of Pozo de la Serna (W from Valdepeñas, Ciudad Real province.
It is obtained the suitable Bouguer anomaly profile from which we calculate a serie of twodimensional cuantitative models of the structure in depth of such granitic body.
Different summons posibilities are discussed subsequently.
Se ha realizado un perfil gravimétrico de 16 kilómetros con dirección este-oeste y 44 lecturas de gravedad, sobre el afloramiento granítico de Pozo de la Serna (al oeste de Valdepeñas, en la provincia de Ciudad Real.
De este modo se obtiene el perfil de anomalías de Bouger correspondiente, sobre el cual se calculan una serie de modelos bidimensionales cuantitativos de la estructura en profundidad de dicho cuerpo granítico.
Posteriormente son discutidas las distintas posibilidades de emplazamiento.
Temple, Aidan
2013-01-01
Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. The step-by-step approach taken by this book will show you how to develop a 2D HTML5 platformer-based game that you will be able to publish to multiple devices.This book is great for anyone who has an interest in HTML5 games development, and who already has a basic to intermediate grasp on both the HTML markup and JavaScript programming languages. Therefore, due to this requirement, the book will not discuss the inner workings of either of these languages but will instead attempt to
DEFF Research Database (Denmark)
Andersen, Thomas Lykke; Frigaard, Peter
This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), on behalf of Energy E2 A/S part of DONG Energy A/S, Denmark. The objective of the tests was: to investigate the combined influence of the pile...... diameter to water depth ratio and the wave hight to water depth ratio on wave run-up of piles. The measurements should be used to design access platforms on piles....
Gluon amplitudes as 2 d conformal correlators
Pasterski, Sabrina; Shao, Shu-Heng; Strominger, Andrew
2017-10-01
Recently, spin-one wave functions in four dimensions that are conformal primaries of the Lorentz group S L (2 ,C ) were constructed. We compute low-point, tree-level gluon scattering amplitudes in the space of these conformal primary wave functions. The answers have the same conformal covariance as correlators of spin-one primaries in a 2 d CFT. The Britto-Cachazo-Feng-Witten (BCFW) recursion relation between three- and four-point gluon amplitudes is recast into this conformal basis.
2D gravity and random matrices
International Nuclear Information System (INIS)
Zinn-Justin, J.
1990-01-01
Recent progress in 2D gravity coupled to d ≤ 1 matter, based on a representation of discrete gravity in terms of random matrices, is reported. The matrix problem can be solved in many cases by the introduction of suitable orthogonal polynomials. Alternatively in the continuum limit the orthogonal polynomial method can be shown to be equivalent to the construction of representation of the canonical commutation relations in terms of differential operators. In the case of pure gravity or discrete Ising-like matter the sum over topologies is reduced to the solution of non-linear differential equations. The d = 1 problem can be solved by semiclassical methods
2-d spectroscopic imaging of brain tumours
International Nuclear Information System (INIS)
Ferris, N.J.; Brotchie, P.R.
2002-01-01
Full text: This poster illustrates the use of two-dimensional spectroscopic imaging (2-D SI) in the characterisation of brain tumours, and the monitoring of subsequent treatment. After conventional contrast-enhanced MR imaging of patients with known or suspected brain tumours, 2-D SI is performed at a single axial level. The level is chosen to include the maximum volume of abnormal enhancement, or, in non-enhancing lesions. The most extensive T2 signal abnormality. Two different MR systems have been used (Marconi Edge and GE Signa LX); at each site, a PRESS localisation sequence is employed with TE 128-144 ms. Automated software is used to generate spectral arrays, metabolite maps, and metabolite ratio maps from the spectroscopic data. Colour overlays of the maps onto anatomical images are produced using manufacturer software or the Medex imaging data analysis package. High grade gliomas showed choline levels higher than those in apparently normal brain, with decreases in NAA and creatine. Some lesions showed spectral abnormality extending into otherwise normal appearing brain. This was also seen in a case of CNS lymphoma. Lowgrade lesions showed choline levels similar to normal brain, but with decreased NAA. Only a small number of metastases have been studied, but to date no metastasis has shown spectral abnormality beyond the margins suggested by conventional imaging. Follow-up studies generally show spectral heterogeneity. Regions with choline levels higher than those in normal-appearing brain are considered to represent recurrent high-grade tumour. Some regions show choline to be the dominant metabolite, but its level is not greater than that seen in normal brain. These regions are considered suspicious for residual / recurrent tumour when the choline / creatine ratio exceeds 2 (lower ratios may represent treatment effect). 2-D SI improves the initial assessment of brain tumours, and has potential for influencing the radiotherapy treatment strategy. 2-D SI also
Is 'bosonic matter' unstable in 2D?
Manoukian, E B
2003-01-01
An upper bound is derived for the exact ground-state energy in 2D, E sub N <= -(me sup 4 /2 h-bar sup 2)(N sup 3 sup / sup 2 /50 pi sup 2), of 'bosonic matter' consisting of N positive and N negative charges with Coulombic interactions. This is to be compared with the classic N sup 7 sup / sup 5 3D-law of Dyson and gives rise to a more 'violent' collapse of such matter in 2D for large N. The derivation is based on a rigorous analysis which, in the process, controls the negative part of the Hamiltonian over its positive kinetic energy part and detailed estimates needed for counting trial wavefunctions of arbitrary states. A formal dimensional analysis in the style of Dyson alone shows, in arbitrary dimensions of space d = 1, 2, ..., that E sub N approx = -(me sup 4 /2 h-bar sup 2)C sub d N suprho, rho = (d + 4)/(d + 2), where C sub d is a positive constant depending on d, consistent with our rigorous bound, and we are led to conjecture that 'bosonic matter' is unstable in all dimensions.
Yang, Shengxue; Jiang, Chengbao; Wei, Su-huai
2017-06-01
Two-dimensional (2D) layered inorganic nanomaterials have attracted huge attention due to their unique electronic structures, as well as extraordinary physical and chemical properties for use in electronics, optoelectronics, spintronics, catalysts, energy generation and storage, and chemical sensors. Graphene and related layered inorganic analogues have shown great potential for gas-sensing applications because of their large specific surface areas and strong surface activities. This review aims to discuss the latest advancements in the 2D layered inorganic materials for gas sensors. We first elaborate the gas-sensing mechanisms and introduce various types of gas-sensing devices. Then, we describe the basic parameters and influence factors of the gas sensors to further enhance their performance. Moreover, we systematically present the current gas-sensing applications based on graphene, graphene oxide (GO), reduced graphene oxide (rGO), functionalized GO or rGO, transition metal dichalcogenides, layered III-VI semiconductors, layered metal oxides, phosphorene, hexagonal boron nitride, etc. Finally, we conclude the future prospects of these layered inorganic materials in gas-sensing applications.
2-d Simulations of Test Methods
DEFF Research Database (Denmark)
Thrane, Lars Nyholm
2004-01-01
One of the main obstacles for the further development of self-compacting concrete is to relate the fresh concrete properties to the form filling ability. Therefore, simulation of the form filling ability will provide a powerful tool in obtaining this goal. In this paper, a continuum mechanical...... approach is presented by showing initial results from 2-d simulations of the empirical test methods slump flow and L-box. This method assumes a homogeneous material, which is expected to correspond to particle suspensions e.g. concrete, when it remains stable. The simulations have been carried out when...... using both a Newton and Bingham model for characterisation of the rheological properties of the concrete. From the results, it is expected that both the slump flow and L-box can be simulated quite accurately when the model is extended to 3-d and the concrete is characterised according to the Bingham...
2D vector-cyclic deformable templates
DEFF Research Database (Denmark)
Schultz, Nette; Conradsen, Knut
1998-01-01
In this paper the theory of deformable templates is a vector cycle in 2D is described. The deformable template model originated in (Grenander, 1983) and was further investigated in (Grenander et al., 1991). A template vector distribution is induced by parameter distribution from transformation...... matrices applied to the vector cycle. An approximation in the parameter distribution is introduced. The main advantage by using the deformable template model is the ability to simulate a wide range of objects trained by e.g. their biological variations, and thereby improve restoration, segmentation...... and probabillity measurement. The case study concerns estimation of meat percent in pork carcasses. Given two cross-sectional images - one at the front and one near the ham of the carcass - the areas of lean and fat and a muscle in the lean area are measured automatically by the deformable templates....
2D quantum gravity from quantum entanglement.
Gliozzi, F
2011-01-21
In quantum systems with many degrees of freedom the replica method is a useful tool to study the entanglement of arbitrary spatial regions. We apply it in a way that allows them to backreact. As a consequence, they become dynamical subsystems whose position, form, and extension are determined by their interaction with the whole system. We analyze, in particular, quantum spin chains described at criticality by a conformal field theory. Its coupling to the Gibbs' ensemble of all possible subsystems is relevant and drives the system into a new fixed point which is argued to be that of the 2D quantum gravity coupled to this system. Numerical experiments on the critical Ising model show that the new critical exponents agree with those predicted by the formula of Knizhnik, Polyakov, and Zamolodchikov.
Locality constraints and 2D quasicrystals
International Nuclear Information System (INIS)
Socolar, J.E.S.
1990-01-01
The plausible assumption that long-range interactions between atoms are negligible in a quasicrystal leaks to the study of tilings that obey constraints on the local configurations of tiles. The theory of such constraints (called matching rules) for 2D quasicrystal tilings is reviewed here. Different types of matching rules are defined and examples of tilings obeying them are given where known. The role of tile decoration is discussed and is shown to be significant in at least two cases (octagonal and dodecagonal duals of periodic 4-grids and 6-grids). A new result is introduced: a constructive procedure is described for generating weak matching rules for tilings with N-fold symmetry, for any N that is either a prime number or twice a prime number. The physics associated with weak matching rules, results on local growth rules, and the case of icosahedral symmetry are all briefly discussed. (author). 29 refs, 4 figs
Nonlinear Optics with 2D Layered Materials.
Autere, Anton; Jussila, Henri; Dai, Yunyun; Wang, Yadong; Lipsanen, Harri; Sun, Zhipei
2018-03-25
2D layered materials (2DLMs) are a subject of intense research for a wide variety of applications (e.g., electronics, photonics, and optoelectronics) due to their unique physical properties. Most recently, increasing research efforts on 2DLMs are projected toward the nonlinear optical properties of 2DLMs, which are not only fascinating from the fundamental science point of view but also intriguing for various potential applications. Here, the current state of the art in the field of nonlinear optics based on 2DLMs and their hybrid structures (e.g., mixed-dimensional heterostructures, plasmonic structures, and silicon/fiber integrated structures) is reviewed. Several potential perspectives and possible future research directions of these promising nanomaterials for nonlinear optics are also presented. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
2D Electrostatic Actuation of Microshutter Arrays
Burns, Devin E.; Oh, Lance H.; Li, Mary J.; Jones, Justin S.; Kelly, Daniel P.; Zheng, Yun; Kutyrev, Alexander S.; Moseley, Samuel H.
2015-01-01
An electrostatically actuated microshutter array consisting of rotational microshutters (shutters that rotate about a torsion bar) were designed and fabricated through the use of models and experiments. Design iterations focused on minimizing the torsional stiffness of the microshutters, while maintaining their structural integrity. Mechanical and electromechanical test systems were constructed to measure the static and dynamic behavior of the microshutters. The torsional stiffness was reduced by a factor of four over initial designs without sacrificing durability. Analysis of the resonant behavior of the microshutter arrays demonstrates that the first resonant mode is a torsional mode occurring around 3000 Hz. At low vacuum pressures, this resonant mode can be used to significantly reduce the drive voltage necessary for actuation requiring as little as 25V. 2D electrostatic latching and addressing was demonstrated using both a resonant and pulsed addressing scheme.
2-D Model Test of Dolosse Breakwater
DEFF Research Database (Denmark)
Burcharth, Hans F.; Liu, Zhou
1994-01-01
). To extend the design diagram to cover Dolos breakwaters with superstructure, 2-D model tests of Dolos breakwater with wave wall is included in the project Rubble Mound Breakwater Failure Modes sponsored by the Directorate General XII of the Commission of the European Communities under Contract MAS-CT92......The rational design diagram for Dolos armour should incorporate both the hydraulic stability and the structural integrity. The previous tests performed by Aalborg University (AU) made available such design diagram for the trunk of Dolos breakwater without superstructures (Burcharth et al. 1992...... was on the Dolos breakwater with a high superstructure, where there was almost no overtopping. This case is believed to be the most dangerous one. The test of the Dolos breakwater with a low superstructure was also performed. The objective of the last part of the experiment is to investigate the influence...
Full revivals in 2D quantum walks
International Nuclear Information System (INIS)
Stefanak, M; Jex, I; Kollar, B; Kiss, T
2010-01-01
Recurrence of a random walk is described by the Polya number. For quantum walks, recurrence is understood as the return of the walker to the origin, rather than the full revival of its quantum state. Localization for two-dimensional quantum walks is known to exist in the sense of non-vanishing probability distribution in the asymptotic limit. We show, on the example of the 2D Grover walk, that one can exploit the effect of localization to construct stationary solutions. Moreover, we find full revivals of a quantum state with a period of two steps. We prove that there cannot be longer cycles for a four-state quantum walk. Stationary states and revivals result from interference, which has no counterpart in classical random walks.
Predicting 2D target velocity cannot help 2D motion integration for smooth pursuit initiation.
Montagnini, Anna; Spering, Miriam; Masson, Guillaume S
2006-12-01
Smooth pursuit eye movements reflect the temporal dynamics of bidimensional (2D) visual motion integration. When tracking a single, tilted line, initial pursuit direction is biased toward unidimensional (1D) edge motion signals, which are orthogonal to the line orientation. Over 200 ms, tracking direction is slowly corrected to finally match the 2D object motion during steady-state pursuit. We now show that repetition of line orientation and/or motion direction does not eliminate the transient tracking direction error nor change the time course of pursuit correction. Nonetheless, multiple successive presentations of a single orientation/direction condition elicit robust anticipatory pursuit eye movements that always go in the 2D object motion direction not the 1D edge motion direction. These results demonstrate that predictive signals about target motion cannot be used for an efficient integration of ambiguous velocity signals at pursuit initiation.
CYP2D6 genotype dependent oxycodone metabolism in postoperative patients.
Stamer, Ulrike M; Zhang, Lan; Book, Malte; Lehmann, Lutz E; Stuber, Frank; Musshoff, Frank
2013-01-01
The impact of polymorphic cytochrome P450 CYP2D6 enzyme on oxycodone's metabolism and clinical efficacy is currently being discussed. However, there are only spare data from postoperative settings. The hypothesis of this study is that genotype dependent CYP2D6 activity influences plasma concentrations of oxycodone and its metabolites and impacts analgesic consumption. Patients received oxycodone 0.05 mg/kg before emerging from anesthesia and patient-controlled analgesia (PCA) for the subsequent 48 postoperative hours. Blood samples were drawn at 30, 90 and 180 minutes after the initial oxycodone dose. Plasma concentrations of oxycodone and its metabolites oxymorphone, noroxycodone and noroxymorphone were analyzed by liquid chromatography-mass spectrometry with electrospray ionization. CYP2D6 genotyping was performed and 121 patients were allocated to the following genotype groups: PM (poor metabolizer: no functionally active CYP2D6 allele), HZ/IM (heterozygous subjects, intermediate metabolizers with decreased CYP2D6 activity), EM (extensive metabolizers, normal CYP2D6 activity) and UM (ultrarapid metabolizers, increased CYP2D6 activity). Primary endpoint was the genotype dependent metabolite ratio of plasma concentrations oxymorphone/oxycodone. Secondary endpoint was the genotype dependent analgesic consumption with calculation of equianalgesic doses compared to the standard non-CYP dependent opioid piritramide. Metabolism differed between CYP2D6 genotypes. Mean (95%-CI) oxymophone/oxycodone ratios were 0.10 (0.02/0.19), 0.13 (0.11/0.16), 0.18 (0.16/0.20) and 0.28 (0.07/0.49) in PM, HZ/IM, EM and UM, respectively (p = 0.005). Oxycodone consumption up to the 12(th) hour was highest in PM (p = 0.005), resulting in lowest equianalgesic doses of piritramide versus oxycodone for PM (1.6 (1.4/1.8); EM and UM 2.2 (2.1/2.3); p<0.001). Pain scores did not differ between genotypes. In this postoperative setting, the number of functionally active CYP2D6 alleles had an impact
CYP2D6 genotype dependent oxycodone metabolism in postoperative patients.
Directory of Open Access Journals (Sweden)
Ulrike M Stamer
Full Text Available BACKGROUND: The impact of polymorphic cytochrome P450 CYP2D6 enzyme on oxycodone's metabolism and clinical efficacy is currently being discussed. However, there are only spare data from postoperative settings. The hypothesis of this study is that genotype dependent CYP2D6 activity influences plasma concentrations of oxycodone and its metabolites and impacts analgesic consumption. METHODS: Patients received oxycodone 0.05 mg/kg before emerging from anesthesia and patient-controlled analgesia (PCA for the subsequent 48 postoperative hours. Blood samples were drawn at 30, 90 and 180 minutes after the initial oxycodone dose. Plasma concentrations of oxycodone and its metabolites oxymorphone, noroxycodone and noroxymorphone were analyzed by liquid chromatography-mass spectrometry with electrospray ionization. CYP2D6 genotyping was performed and 121 patients were allocated to the following genotype groups: PM (poor metabolizer: no functionally active CYP2D6 allele, HZ/IM (heterozygous subjects, intermediate metabolizers with decreased CYP2D6 activity, EM (extensive metabolizers, normal CYP2D6 activity and UM (ultrarapid metabolizers, increased CYP2D6 activity. Primary endpoint was the genotype dependent metabolite ratio of plasma concentrations oxymorphone/oxycodone. Secondary endpoint was the genotype dependent analgesic consumption with calculation of equianalgesic doses compared to the standard non-CYP dependent opioid piritramide. RESULTS: Metabolism differed between CYP2D6 genotypes. Mean (95%-CI oxymophone/oxycodone ratios were 0.10 (0.02/0.19, 0.13 (0.11/0.16, 0.18 (0.16/0.20 and 0.28 (0.07/0.49 in PM, HZ/IM, EM and UM, respectively (p = 0.005. Oxycodone consumption up to the 12(th hour was highest in PM (p = 0.005, resulting in lowest equianalgesic doses of piritramide versus oxycodone for PM (1.6 (1.4/1.8; EM and UM 2.2 (2.1/2.3; p<0.001. Pain scores did not differ between genotypes. CONCLUSIONS: In this postoperative setting, the number of
Chew, Marci L; Mordenti, Joyce; Yeoh, Thean; Ranade, Gautam; Qiu, Ruolun; Fang, Juanzhi; Liang, Yali; Corrigan, Brian
2016-08-01
Transdermal delivery has the potential to offer improved bioavailability by circumventing first-pass gut and hepatic metabolism. This study evaluated the pharmacokinetics of oral immediate release and transdermal latrepirdine in extensive and poor CYP2D6 metabolizers (EM/PM). Latrepirdine transdermal solution was prepared extemporaneously. The solution was applied with occlusive dressing to upper or middle back for 24 h. Each subject received a single dose of 8.14 mg oral, 5 mg transdermal, and 10 mg transdermal (EMs only) latrepirdine free base in a fixed sequence. Twelve EMs and 7 PMs (50-79 years) enrolled and completed the study. Latrepirdine was well tolerated following both routes of administration. Dose-normalized latrepirdine total exposures were approximately 11-fold and 1.5-fold higher in EMs and PMs, respectively following administration of transdermal relative to oral. Differences between EM and PM latrepirdine exposures were decreased, with PMs having 1.9- and 2.7-fold higher peak and total exposures, respectively, following transdermal administration compared to 11- and 20-fold higher exposures, respectively, following oral administration. Transdermal delivery can potentially mitigate the large intersubject differences observed with compounds metabolized primarily by CYP2D6. Transdermal delivery was readily accomplished in the clinic using an extemporaneously prepared solution [NCT00990613].
Photovoltaic Effect of 2D Homologous Perovskites
International Nuclear Information System (INIS)
Jung, Mi-Hee
2017-01-01
Highlights: • The mixed perovskite was prepared by exposure of MAI gas on the BAPbI_4 film. • The increased dimensional perovskite shows a smaller band gap than 2D perovskite. • The mixed perovskite system shows the vertical crystal orientation. • The mixed perovskite cell exhibits the higher Jsc and FF than 2D perovskite cell. - Abstract: The controlled growth of mixed dimensional perovskite structures, (C_6H_5CH_2NH_2)(CH_3NH_3)_n_-_1Pb_nI_3_n_+_1, through the introduction of CH_3NH_3I molecule vapor into the two-dimensional perovskite C_6H_5CH_2NH_3PbI_4 structure and its application in photovoltaic devices is reported. The dimensionality of (C_6H_5CH_2NH_2)(CH_3NH_3)_n_-_1Pb_nI_3_n_+_1 is controlled using the exposure time to the CH_3NH_3I vapor on the C_6H_5CH_2NH_3PbI_4 perovskite film. As the stacking of the lead iodide lattice increases, the crystallographic planes of the inorganic perovskite compound exhibit vertical growth in order to facilitate efficient charge transport. Furthermore, the devices have a smaller band gap, which offers broader absorption and the potential to increase the photocurrent density in the solar cell. As a result, the photovoltaic device based on the (C_6H_5CH_2NH_2)(CH_3NH_3)_n_-_1Pb_nI_3_n_+_1 perovskite exhibits a power conversion efficiency of 5.43% with a short circuit current density of 14.49 mA cm"−"2, an open circuit voltage of 0.85 V, and a fill factor of 44.30 for the best power conversion efficiency under AM 1.5G solar irradiation (100 mW cm"−"2), which is significantly higher than the 0.34% of the pure two-dimensional BAPbI_4 perovskite-based solar cell.
A physical pattern recognition approach for 2D electromagnetic induction studies
Directory of Open Access Journals (Sweden)
D. Patella
2000-06-01
Full Text Available We present a new tomographic procedure for the analysis of natural source electromagnetic (EM induction field data collected over any complex 2D buried structure beneath a flat air-earth boundary. The tomography is developed in a pure physical context and the primary goal is the depiction of the space distribution of two occurrence probability functions for the induced electrical charge accumulations on resistivity discontinuities and current channelling inside conductive bodies, respectively. The procedure to obtain tomographic image consists of a scanning operation governed analytically by a set of multiple interference cross-correlations between the observed EM components and the corresponding synthetic components of a pair of elementary charge and dipole. To show the potentiality of the proposed physical tomography, we discuss the results from three 2D synthetic examples.
Parallelization of 2-D lattice Boltzmann codes
International Nuclear Information System (INIS)
Suzuki, Soichiro; Kaburaki, Hideo; Yokokawa, Mitsuo.
1996-03-01
Lattice Boltzmann (LB) codes to simulate two dimensional fluid flow are developed on vector parallel computer Fujitsu VPP500 and scalar parallel computer Intel Paragon XP/S. While a 2-D domain decomposition method is used for the scalar parallel LB code, a 1-D domain decomposition method is used for the vector parallel LB code to be vectorized along with the axis perpendicular to the direction of the decomposition. High parallel efficiency of 95.1% by the vector parallel calculation on 16 processors with 1152x1152 grid and 88.6% by the scalar parallel calculation on 100 processors with 800x800 grid are obtained. The performance models are developed to analyze the performance of the LB codes. It is shown by our performance models that the execution speed of the vector parallel code is about one hundred times faster than that of the scalar parallel code with the same number of processors up to 100 processors. We also analyze the scalability in keeping the available memory size of one processor element at maximum. Our performance model predicts that the execution time of the vector parallel code increases about 3% on 500 processors. Although the 1-D domain decomposition method has in general a drawback in the interprocessor communication, the vector parallel LB code is still suitable for the large scale and/or high resolution simulations. (author)
Multimodal 2D Brain Computer Interface.
Almajidy, Rand K; Boudria, Yacine; Hofmann, Ulrich G; Besio, Walter; Mankodiya, Kunal
2015-08-01
In this work we used multimodal, non-invasive brain signal recording systems, namely Near Infrared Spectroscopy (NIRS), disc electrode electroencephalography (EEG) and tripolar concentric ring electrodes (TCRE) electroencephalography (tEEG). 7 healthy subjects participated in our experiments to control a 2-D Brain Computer Interface (BCI). Four motor imagery task were performed, imagery motion of the left hand, the right hand, both hands and both feet. The signal slope (SS) of the change in oxygenated hemoglobin concentration measured by NIRS was used for feature extraction while the power spectrum density (PSD) of both EEG and tEEG in the frequency band 8-30Hz was used for feature extraction. Linear Discriminant Analysis (LDA) was used to classify different combinations of the aforementioned features. The highest classification accuracy (85.2%) was achieved by using features from all the three brain signals recording modules. The improvement in classification accuracy was highly significant (p = 0.0033) when using the multimodal signals features as compared to pure EEG features.
FILM ANIMASI 2D (DIMENSI PENYULUHAN KB
Directory of Open Access Journals (Sweden)
Tri Hidayatul Ahmad Ismail
2013-02-01
Full Text Available Multimedia Animation is an attempt to make a live presentation of static or moving, the animation may consist of images and music to blend together and become alive. In this case Multimedia Animation designed by using multimedia-based information technology. From year to year Multimedia Animation Film Animation shaped more advanced, both in coloring, and in concep movement. With the community Animation Film spoiled by progress dazzling animation creation. Later in the era of globalization in Indonesia's population penetration rate can be calculated very rapidly. So the authors designed an Animated Film to Family Planning Counseling to promote family planning in the community.Data collection methods used to make this application is the method of interview and literature study. For the development of the system in this paper by using development techniques Luther systems development models - Sutopo which consists of six stages: concept, design, collecting materials, assembly, testing and distribution. The results of this study are 2D Animation Film as a medium of socialization to Family Planning Department with extension. Avi and will be distributed via CD media and aired on Social Media such as Facebook, Twitter and YouTube. This animation movie aims to be one choice as the media reduces the increase in the number of residents is too drastic. Keywords: movies, animation, family planning, Luther-Sutopo
2D conformal field theories and holography
International Nuclear Information System (INIS)
Freidel, Laurent; Krasnov, Kirill
2004-01-01
It is known that the chiral part of any 2D conformal field theory defines a 3D topological quantum field theory: quantum states of this TQFT are the CFT conformal blocks. The main aim of this paper is to show that a similar CFT/TQFT relation exists also for the full CFT. The 3D topological theory that arises is a certain 'square' of the chiral TQFT. Such topological theories were studied by Turaev and Viro; they are related to 3D gravity. We establish an operator/state correspondence in which operators in the chiral TQFT correspond to states in the Turaev-Viro theory. We use this correspondence to interpret CFT correlation functions as particular quantum states of the Turaev-Viro theory. We compute the components of these states in the basis in the Turaev-Viro Hilbert space given by colored 3-valent graphs. The formula we obtain is a generalization of the Verlinde formula. The later is obtained from our expression for a zero colored graph. Our results give an interesting 'holographic' perspective on conformal field theories in two dimensions
2D electromagnetic modelling of superconductors
International Nuclear Information System (INIS)
Morandi, Antonio
2012-01-01
Some issues concerning the numerical analysis of superconductors are discussed and a novel approach to 2D modelling is proposed. Both axial and translational symmetric as well as current driven and voltage driven systems are examined in detail. The E–J power law is chosen instead of the critical state model as a constitutive relation of the material and the need to modify this relation in order to account for the normal state transition at high currents is discussed. A linear space reconstruction of the current density by means of nodal shape functions is used in order to build the finite dimensional model. A method to relax the tangential continuity of the current density, which is inherent to the discretization method used, is discussed. The performance of the proposed approach, both in terms of current distribution and AC loss, is evaluated with reference to some cases of practical interest involving composite materials. The role of the electric field as a natural state variable for superconducting problems is also pointed out. The use of the method as an alternative to the circuit approach or edge elements for modelling the superconductors is finally discussed. (paper)
Parallelization of 2-D lattice Boltzmann codes
Energy Technology Data Exchange (ETDEWEB)
Suzuki, Soichiro; Kaburaki, Hideo; Yokokawa, Mitsuo
1996-03-01
Lattice Boltzmann (LB) codes to simulate two dimensional fluid flow are developed on vector parallel computer Fujitsu VPP500 and scalar parallel computer Intel Paragon XP/S. While a 2-D domain decomposition method is used for the scalar parallel LB code, a 1-D domain decomposition method is used for the vector parallel LB code to be vectorized along with the axis perpendicular to the direction of the decomposition. High parallel efficiency of 95.1% by the vector parallel calculation on 16 processors with 1152x1152 grid and 88.6% by the scalar parallel calculation on 100 processors with 800x800 grid are obtained. The performance models are developed to analyze the performance of the LB codes. It is shown by our performance models that the execution speed of the vector parallel code is about one hundred times faster than that of the scalar parallel code with the same number of processors up to 100 processors. We also analyze the scalability in keeping the available memory size of one processor element at maximum. Our performance model predicts that the execution time of the vector parallel code increases about 3% on 500 processors. Although the 1-D domain decomposition method has in general a drawback in the interprocessor communication, the vector parallel LB code is still suitable for the large scale and/or high resolution simulations. (author).
A simplified 2D HTTR benchmark problem
International Nuclear Information System (INIS)
Zhang, Z.; Rahnema, F.; Pounders, J. M.; Zhang, D.; Ougouag, A.
2009-01-01
To access the accuracy of diffusion or transport methods for reactor calculations, it is desirable to create heterogeneous benchmark problems that are typical of relevant whole core configurations. In this paper we have created a numerical benchmark problem in 2D configuration typical of a high temperature gas cooled prismatic core. This problem was derived from the HTTR start-up experiment. For code-to-code verification, complex details of geometry and material specification of the physical experiments are not necessary. To this end, the benchmark problem presented here is derived by simplifications that remove the unnecessary details while retaining the heterogeneity and major physics properties from the neutronics viewpoint. Also included here is a six-group material (macroscopic) cross section library for the benchmark problem. This library was generated using the lattice depletion code HELIOS. Using this library, benchmark quality Monte Carlo solutions are provided for three different configurations (all-rods-in, partially-controlled and all-rods-out). The reference solutions include the core eigenvalue, block (assembly) averaged fuel pin fission density distributions, and absorption rate in absorbers (burnable poison and control rods). (authors)
Partição de substâncias húmicas em solos brasileiros
Directory of Open Access Journals (Sweden)
Lauana Lopes dos Santos
2013-08-01
Full Text Available As substâncias húmicas (SH representam o principal reservatório de carbono orgânico total do solo (COT e sua partição entre diferentes frações de solubilidade em meio alcalino ou ácido pode guardar relação com o tipo de solo e manejo adotado. O objetivo deste trabalho foi comparar a partição das SHs, de acordo com profundidade, tipo de solo, bioma e uso do solo no Brasil. Revisou-se a literatura, incluindo teses, dissertações, artigos e resumos em anais de eventos, em busca de dados sobre o teor de COT, sua porcentagem como ácidos húmicos (AH, ácidos fúlvicos (AF e humina (HU e a razão AH/AF. Os dados foram estratificados por intervalos comparáveis de profundidades (0-5, 5-10, 0-20, 20-50, 50-100 e >100 cm, biomas (Mata Atlântica, Cerrado, Amazônia, Pampa e Caatinga, ordem de solo (Argissolo, Latossolo, Cambissolo, Planossolo, Neossolo, Gleissolo e Organossolo e principais usos do solo (florestas nativas, pastagem natural, pastagem plantada, eucalipto, culturas perenes e anuais. Os dados foram analisados por estatística descritiva, correlações de Spearman e análise de componentes principais (ACP. Nos Argissolos, Latossolos e Organossolos, a fração HU contribuiu com metade do COT, tendendo a diminuir em profundidade. Para Latossolos e Organossolos, a fração AF tendeu a aumentar em profundidade. Em Neossolos, a fração AH aumentou em profundidade, embora tenha diminuído em Gleissolos e Planossolos. A razão AH/AF geralmente diminui em profundidade. Pela ACP, não foi possível identificar um padrão de agrupamento das amostras em razão do tipo de bioma e uso do solo, sugerindo que a partição das SHs tem baixo potencial como indicador de efeitos do manejo ou condições ambientais, embora seja útil para discriminar processos de humificação em algumas ordens de solo.
Directory of Open Access Journals (Sweden)
Rafael Mingoti
2006-09-01
Full Text Available Com o aumento do preço da terra e da demanda por álcool/açúcar tem-se buscado o aumento da produtividade da cultura da cana e o aproveitamento de novas áreas para a produção, as quais podem necessitar de drenagem. Com isso, tornam-se importantes estudos de dimensionamento de sistemas de drenagem agrícola e sua avaliação econômica. O trabalho teve como objetivo avaliar economicamente, com o auxílio do modelo SISDRENA, a melhor combinação entre profundidade e espaçamento de valas, implantados em três tipos de solo, com condutividades hidráulicas de 1,0, 0,5 e 0,1 m d-1. As profundidades simuladas variaram de 0,20 a 2,00 m, com intervalos de 0,05 m, enquanto os espaçamentos oscilaram de 5 a 100 m, com intervalos de 5 m. Para os três tipos de solo obtiveram-se combinações que revelaram viabilidade econômica para implantação dos sistemas de drenagem. Os resultados indicaram que fatores como o déficit hídrico, a perda de área cultivada pela abertura de valetas e o retorno econômico do empreendimento, são aspectos importantes e devem ser considerados no dimensionamento do sistema de drenagem.With the increase of the agricultural land prices and the demand for alchol/sugar, there have been a tendency to increase productivity and use of new areas for crop production in which drainage may be needed. Therefore, the studies of economic evaluation of agricultural drainage projects for this crop have become important. This work had as objective to evaluate economically the best combination between depth and spacing of open drains, implanted in three soil types, with hydraulic conductivities of 1.0, 0.5 and 0.1 m d-1, with the support of SISDRENA model. The simulated depths varied from 0.20 to 2.0 m, with intervals of 0.05 m, while the spacings varied from 5 to 100 m, with intervals of 5 m. Combinations for the three soils types showed economic viability for the implementation of drainage system. The results also showed that
NASA-VOF2D, 2-D Transient Free Surface Incompressible Fluid Dynamic
International Nuclear Information System (INIS)
Torrey, M.D.
1988-01-01
1 - Description of program or function: NASA-VOF2D is a two- dimensional, transient, free surface incompressible fluid dynamics program. It allows multiple free surfaces with surface tension and wall adhesion forces and has a partial cell treatment which allows curved boundaries and interior obstacles. 2 - Method of solution: NASA-VOF2D simulates incompressible flows with free surfaces using the volume-of-fluid (VOF) algorithm. This technique is based on the use of donor-acceptor differencing to track the free surface across an Eulerian grid. The complete Navier-Stokes equations in primitive variables for an incompressible fluid are solved by finite differences with surface tension and wall adhesion included. Optionally the pressure equation can be solved by a conjugate residual method rather than the successive over-relaxation (SOR) method
Identification of novel CYP2D7-2D6 hybrids: non-functional and functional variants
Directory of Open Access Journals (Sweden)
Andrea Gaedigk
2010-10-01
Full Text Available Polymorphic expression of CYP2D6 contributes to the wide range of activity observed for this clinically important drug metabolizing enzyme. In this report we describe novel CYP2D7/2D6 hybrid genes encoding non-functional and functional CYP2D6 protein and a CYP2D7 variant that mimics a CYP2D7/2D6 hybrid gene. Five kb long PCR products encompassing the novel genes were entirely sequenced. A quantitative assay probing in different gene regions was employed to determine CYP2D6 and 2D7 copy number variations and the relative position of the hybrid genes within the locus was assessed by long-range PCR. In addition to the previously known CYP2D6*13 and *66 hybrids, we describe three novel non-functional CYP2D7-2D6 hybrids with gene switching in exon 2 (CYP2D6*79, intron 2 (CYP2D6*80 and intron 5 (CYP2D6*67. A CYP2D7-specific T-ins in exon 1 causes a detrimental frame shift. One subject revealed a CYP2D7 conversion in the 5’-flanking region of a CYP2D6*35 allele, was otherwise unaffected (designated CYP2D6*35B. Finally, three DNAs revealed a CYP2D7 gene with a CYP2D6-like region downstream of exon 9 (designated CYP2D7[REP6]. Quantitative copy number determination, sequence analyses and long-range PCR mapping were in agreement and excluded the presence of additional gene units. Undetected hybrid genes may cause over-estimation of CYP2D6 activity (CYP2D6*1/*1 vs *1/hybrid, etc, but may also cause results that may interfere with the genotype determination. Detection of hybrid events, ‘single’ and tandem, will contribute to more accurate phenotype prediction from genotype data.
On physical states in 2d (topological) gravity
International Nuclear Information System (INIS)
Bouwknegt, P.; McCarthy, J.; Pilch, K.
1993-01-01
We review the BRST computation of physical states in various 2d gravity theories. First we discuss the cohomology relevant for 2d gravity coupled to c ≤ 1 conformal matter. We then use these results to compute the cohomology of a c=26 βγ-system, i.e. restricted 2d topological gravity. We also comment on the cohomology for the complete 2d topological gravity. (author). 39 refs
Energy Technology Data Exchange (ETDEWEB)
Sachse, C.; Brockmoeller, J.; Bauer, S.; Roots, I. [Humboldt Univ., Berlin (Germany)
1997-02-01
Cytochrome P450 2D6 (CYP2D6) metabolizes many important drugs. CYP2D6 activity ranges from complete deficiency to ultrafast metabolism, depending on at least 16 different known alleles. Their frequencies were determined in 589 unrelated German volunteers and correlated with enzyme activity measured by phenotyping with dextromethorphan or debrisoquine. For genotyping, nested PCR-RFLP tests from a PCR amplificate of the entire CYP2D6 gene were developed. The frequency of the CYP2D6*1 allele coding for extensive metabolizer (EM) phenotype was .364. The alleles coding for slightly (CYP2D6*2) or moderately (*9 and *10) reduced activity (intermediate metabolizer phenotype [IM]) showed frequencies of .324, .018, and .015, respectively. By use of novel PCR tests for discrimination, CYP2D6 gene duplication alleles were found with frequencies of.005 (*1 x 2), .013 (* 2 x 2), and .001 (*4 x 2). Frequencies of alleles with complete deficiency (poor metabolizer phenotype [PM]) were .207 (*4), .020 (*3 and *5), .009 (*6), and .001 (*7, *15, and *16). The defective CYP2D6 alleles *8, *11, *12, *13, and *14 were not found. All 41 PMs (7.0%) in this sample were explained by five mutations detected by four PCR-RFLP tests, which may suffice, together with the gene duplication test, for clinical prediction of CYP2D6 capacity. Three novel variants of known CYP2D6 alleles were discovered: *1C (T{sub 1957}C), *2B (additional C{sub 2558}T), and *4E (additional C{sub 2938}T). Analysis of variance showed significant differences in enzymatic activity measured by the dextromethorphan metabolic ratio (MR) between carriers of EN/PM (mean MR = .006) and IM/PM (mean MR = .014) alleles and between carriers of one (mean MR = .009) and two (mean MR = .003) functional alleles. The results of this study provide a solid basis for prediction of CYP2D6 capacity, as required in drug research and routine drug treatment. 35 refs., 4 figs., 5 tabs.
Directory of Open Access Journals (Sweden)
Peña C. Jorge
1989-12-01
Full Text Available El estudio se realizó con el objetivo de analizar la respuesta del girasol a la fertilización a diferentes profundidades. Los tratamientos fueron: incorporación del fertilizante a 10 cm con rastrillo pulidor, a 15 cm con rastra-arado, a 25 cm con arado de discos y a 30 cm con cincel-abonador; testigo absoluto sin fertilizar. Se presentaron incrementos en rendimiento a la incorporación del fertilizante a 30 cm, mostrando diferencias altamente significativas con la fertilización a 10 cm y el testigo, los incrementos en rendimiento fueron de 64.9% y 109.7% en promedio para cada uno de los semestres. Igualmente, se observaron aumentos en el diámetro del capítulo, en el peso de 1.000 semillas, en la altura de planta y disminución en el porcentaje de semillas vanas en el capitulo. Los porcentajes de cáscara, almendra, aceite y proteína no respondieron a la fertilización profunda. Desde el punto de vista económico, la mejor alternativa correspondió a la fertilización a 30 cm con cincel-abonador; la incorporación a 15 cm, con la rastra-arado, se presentó como según da opción con una tasa de retorno marginal aceptable, la cual para la región se estimó en 100 % como valor mínimo.The objective of the study was to analize the response in yield and other agronomic characteristics of sunflower based on different depths of fertilizer application. The treatments were application of fertilizer 10 cm depth tandem disk harrow, 15 cm depth with disk harrow, 25 cm depth with disk plow and 30 cm depth with chisel; an absolut control was also included. The incorporation with chisel was significantly higher than disk harrow and the control, but not with tandem disk harrow and disk plow. Increments of the chisel treatment with respect to disk harrow for the two consecutive semester were thus: for yield 64.9% and 109.7%; for capitulum diameter 20.1% and 29.9%: for weight of 1.000 seeds 34.7% and 37.1 % for plant height 15.6 % and 27.7 %, and a
Energy Technology Data Exchange (ETDEWEB)
Reboucas, Lucia M.C.; Sant' Ana, Antonio E.G.; Sabino, Adilson R.; Nogueira, Fred A.R.; Moraes, Reinaldo J.R.; Crispim, Alessandre [Universidade Federal de Alagoas (UFAL), Maceio, AL (Brazil). Inst. de Quimica e Biotecnologia . Lab. de Analises de Biomarcadores e Semioquimicos]. E-mail: lmcr@qui.ufal.br
2008-07-01
This paper reports the distribution and the concentration of n-alkane homologue series and the HPA compounds in 22 oils from Alagoas sub-basin, Pilar Field, Brazil. The n-alkane profile of whole oil gas chromatograms (CG-FID) to light, medium and heave oils represented no-biodegraded oils. The light and medium oils have n-alkane distribution with a maximum in nC{sub 10} and nC{sub 17}. The ration pristine/phytane (P/F) between 1,5 and 2,7 suggest Lacustrine origin. The nalkane distribution from the heavy oils show two maximum between nC{sub 15} and nC{sub 23}. The concentrations of n-alkane are different to all the 22 oils. The F2 fraction classified as light (API>39), medium (36
NKG2D and its ligands in cancer.
Dhar, Payal; Wu, Jennifer D
2018-04-01
NKG2D is an activating immune receptor expressed by NK and effector T cells. Induced expression of NKG2D ligand on tumor cell surface during oncogenic insults renders cancer cells susceptible to immune destruction. In advanced human cancers, tumor cells shed NKG2D ligand to produce an immune soluble form as a means of immune evasion. Soluble NKG2D ligands have been associated with poor clinical prognosis in cancer patients. Harnessing NKG2D pathway is considered a viable avenue in cancer immunotherapy over recent years. In this review, we will discuss the progress and perspectives. Copyright © 2018. Published by Elsevier Ltd.
CYP2D7 sequence variation interferes with TaqMan CYP2D6*15 and *35 genotyping
Directory of Open Access Journals (Sweden)
Amanda K Riffel
2016-01-01
Full Text Available TaqMan™ genotyping assays are widely used to genotype CYP2D6, which encodes a major drug metabolizing enzyme. Assay design for CYP2D6 can be challenging owing to the presence of two pseudogenes, CYP2D7 and CYP2D8, structural and copy number variation and numerous single nucleotide polymorphisms (SNPs some of which reflect the wild-type sequence of the CYP2D7 pseudogene. The aim of this study was to identify the mechanism causing false positive CYP2D6*15 calls and remediate those by redesigning and validating alternative TaqMan genotype assays. Among 13,866 DNA samples genotyped by the CompanionDx® lab on the OpenArray platform, 70 samples were identified as heterozygotes for 137Tins, the key SNP of CYP2D6*15. However, only 15 samples were confirmed when tested with the Luminex xTAG CYP2D6 Kit and sequencing of CYP2D6-specific long range (XL-PCR products. Genotype and gene resequencing of CYP2D6 and CYP2D7-specific XL-PCR products revealed a CC>GT dinucleotide SNP in exon 1 of CYP2D7 that reverts the sequence to CYP2D6 and allows a TaqMan assay PCR primer to bind. Because CYP2D7 also carries a Tins, a false-positive mutation signal is generated. This CYP2D7 SNP was also responsible for generating false-positive signals for rs769258 (CYP2D6*35 which is also located in exon 1. Although alternative CYP2D6*15 and *35 assays resolved the issue, we discovered a novel CYP2D6*15 subvariant in one sample that carries additional SNPs preventing detection with the alternate assay. The frequency of CYP2D6*15 was 0.1% in this ethnically diverse U.S. population sample. In addition, we also discovered linkage between the CYP2D7 CC>GT dinucleotide SNP and the 77G>A (rs28371696 SNP of CYP2D6*43. The frequency of this tentatively functional allele was 0.2%. Taken together, these findings emphasize that regardless of how careful genotyping assays are designed and evaluated before being commercially marketed, rare or unknown SNPs underneath primer and/or probe
Directory of Open Access Journals (Sweden)
Marcos Antonio Zambillo Palma
2010-10-01
Full Text Available A consolidação do sistema de semeadura direta trás grandes benefícios ao meio ambiente e, também, é notável a redução dos custos de produção devido a desnecessidade das operações como aração, subsolagem, escarificação e gradagem. Porém, nesse sistema se têm muitos problemas relacionados a compactação das camadas superficiais em função do tráfego de máquinas e a consorciação lavoura-pecuária. A solução encontrada pelos agricultores tem sido a substituição, na semeadora-adubadora, do sulcador disco duplo pela haste sulcadora que atua em profundidades superiores. O presente estudo teve como objetivo avaliar diferentes profundidades de trabalho da haste sulcadora, analisando o consumo de combustível, força de tração, índice de patinagem, potência na barra de tração, consumo específico de combustível e capacidade de campo teórica de um trator agrícola tracionando uma semeadora-adubadora em solo compactado pela integração lavoura-pecuária. Os tratamentos foram 100, 150, 200 e 250 mm de profundidade de trabalho da haste sulcadora, sendo os ensaios desenvolvidos no Departamento de Engenharia da Universidade Federal de Lavras, utilizando delineamento experimental de blocos, casualisados, composto por quatro tratamentos e três repetições. Dessa forma, conclui-se que o aumento da profundidade de trabalho da haste sulcadora em semeadoras-adubadoras de semeadura direta de milho em solos compactados ocorre o aumento no consumo de combustível, no índice de patinagem e no esforço de tração dos tratores agrícolas. Porém, quando a ponteira da haste sulcadora trabalhou posicionada 50 mm abaixo da camada mais compactada se teve reduções nos parâmetros força de tração e índice de patinagem, aumentando a capacidade de campo teórica.The direct sowing system brings many benefits to the environment and also reduction in production costs, since operations such as plowing, subsoiling, chiseling and harrowing
Metodología para calcular la profundidad de socavación general en ríos de montaña (lecho de gravas)
Barbosa Gil, Sebastian
2013-01-01
La modelación de la profundidad de socavación general se puede hacer desde varios enfoques, a partir de metodologías netamente empíricas como la teoría del régimen, formulaciones semi-empíricas basadas en una condición de equilibrio, o mediante balances de masa entre el sedimento transportado y la capacidad de transporte de una corriente. En éste trabajo se comparan los resultados obtenidos por estas diferentes metodologías a partir de mediciones bienales de cambios en el lecho de un tramo...
Efecto del riego y profundidad de compactación en la producción de soya variedad valluna-5
Directory of Open Access Journals (Sweden)
Gallardo B. Carlos A.
1992-12-01
Full Text Available
El experimento se realizó durante el segundo semestre de 1992 en el Centro de Investigaciones del ICA en Palmira, con el objetivo de evaluar el efecto de diferentes profundidades de compactación y niveles de humedad sobre la producción de soya variedad Valluna-5. En un suelo franco sin deficiencias, ni toxicidad por elementos, se estableció el experimento en un arreglo en franjas divididas, con cuatro repeticiones: las parcelas principales fueron los tres niveles de riego y las subparcelas las profundidades de compactación (5, 15 y 30 cm y testigo. El nivel de humedad afectó el rendimiento, peso de 100 semillas y porcentaje de germinación.; mientras que las profundidades de compactación restringieron más la profundidad de raíces. Los tratamientos no afectaron la altura de planta, área foliar, calidad de semilla, porcentaje de grasas y proteínas y toma de elementos (N, P, K, Ca, Mg, Mn, Zn, Cu, Fe y B.
At Instituto Colombiano Agropecuario (ICA in Palmira, an experiment was carried out during the second semester of 1992 to evaluate the effect of different compaction depths and moisture levels on the soybean Valluna - 5 variety. On a loam soil without deficiencies nor toxicity of elements, the experiment was stablished under a split plot arrangement with four repetitions where the principal plots were the three irrigation levels and the subplots were the compaction depths (5, 15, 30 cm and control. The moisture level was more influential than the compaction depth respect to the yield, weight of 100 seeds and germination percentage, while the compaction depth restricted more the root depth. Height of plants, foliar area, seed quality, oil and protein percentages and uptake of elements (N, P, K, Ca, MG, Mn, Zn, Cu, Fe and B were not affected by the treatments.
Rodriguez Calle, J.P.
2005-01-01
El trabajo de experimentación se realizó en predios de la Estación Experimental de Choquenaira, geográficamente ubicada a LS 16º41'38", LO 68º17'13" y a una altitud de 3854 msnm. Se consideraron como objetivos del experimento: determinar las diferencias existentes en los primeros estadios de la planta con respecto a los diferentes tamaños de granos de quinua de la variedad Surumi combinados a distintas profundidades de siembra y las consecuencias en el rendimiento final. (Résumé d'auteur)...
Functional characterization of a first avian cytochrome P450 of the CYP2D subfamily (CYP2D49.
Directory of Open Access Journals (Sweden)
Hua Cai
Full Text Available The CYP2D family members are instrumental in the metabolism of 20-25% of commonly prescribed drugs. Although many CYP2D isoforms have been well characterized in other animal models, research concerning the chicken CYP2Ds is limited. In this study, a cDNA encoding a novel CYP2D enzyme (CYP2D49 was cloned from the chicken liver for the first time. The CYP2D49 cDNA contained an open reading frame of 502 amino acids that shared 52%-57% identities with other CYP2Ds. The gene structure and neighboring genes of CYP2D49 are conserved and similar to those of human CYP2D6. Additionally, similar to human CYP2D6, CYP2D49 is un-inducible in the liver and expressed predominantly in the liver, kidney and small intestine, with detectable levels in several other tissues. Metabolic assays of the CYP2D49 protein heterologously expressed in E. coli and Hela cells indicated that CYP2D49 metabolized the human CYP2D6 substrate, bufuralol, but not debrisoquine. Moreover, quinidine, a potent inhibitor of human CYP2D6, only inhibited the bufuralol 1'-hydroxylation activity of CYP2D49 to a negligible degree. All these results indicated that CYP2D49 had functional characteristics similar to those of human CYP2D6 but measurably differed in the debrisoquine 4'-hydroxylation and quinidine inhibitory profile. Further structure-function investigations that employed site-directed mutagenesis and circular dichroism spectroscopy identified the importance of Val-126, Glu-222, Asp-306, Phe-486 and Phe-488 in keeping the enzymatic activity of CYP2D49 toward bufuralol as well as the importance of Asp-306, Phe-486 and Phe-488 in maintaining the conformation of CYP2D49 protein. The current study is only the first step in characterizing the metabolic mechanism of CYP2D49; further studies are still required.
The no-hair conjecture in 2D dilaton supergravity
International Nuclear Information System (INIS)
Gamboa, J.; Georgelin, Y.
1993-06-01
Two dimensional dilaton gravity and supergravity are studied following Hamiltonian methods. The structure of constraints of 2D dilaton gravity and the 2D dilaton supergravity theory is discussed taking the square root of the bosonic constraints. The equations of motion are integrated in both cases, and it is shown that the solutions of the equation of motion of 2D dilaton supergravity differs from the solutions of 2D dilaton gravity only by boundary conditions on the fermionic variables, i.e. the black holes of 2D dilaton supergravity theory are exactly the same black holes of 2D bosonic dilaton gravity modulo supersymmetry transformations. This result is the bidimensional analogue of the no-hair theorem for supergravity. (authors). 28 refs
DEFF Research Database (Denmark)
Vadstrup, Kasper; Bendtsen, Flemming
2017-01-01
with a wide range of cell types and proteins involved. Natural Killer Group 2D (NKG2D) is an activating receptor constitutively expressed on human Natural Killer (NK), γδ T, mucosal-associated invariant T (MAIT), CD56⁺ T, and CD8⁺ T cells. Activation of NKG2D triggers cellular proliferation, cytokine...... production, and target cell killing. Research into the NKG2D mechanism of action has primarily been focused on cancer and viral infections where cytotoxicity evasion is a concern. In human inflammatory bowel disease (IBD) this system is less characterized, but the ligands have been shown to be highly...... expressed during intestinal inflammation and the following receptor activation may contribute to tissue degeneration. A recent phase II clinical trial showed that an antibody against NKG2D induced clinical remission of CD in some patients, suggesting NKG2D and its ligands to be of importance...
Buser, Thaddaeus J; Sidlauskas, Brian L; Summers, Adam P
2018-05-01
We contrast 2D vs. 3D landmark-based geometric morphometrics in the fish subfamily Oligocottinae by using 3D landmarks from CT-generated models and comparing the morphospace of the 3D landmarks to one based on 2D landmarks from images. The 2D and 3D shape variables capture common patterns across taxa, such that the pairwise Procrustes distances among taxa correspond and the trends captured by principal component analysis are similar in the xy plane. We use the two sets of landmarks to test several ecomorphological hypotheses from the literature. Both 2D and 3D data reject the hypothesis that head shape correlates significantly with the depth at which a species is commonly found. However, in taxa where shape variation in the z-axis is high, the 2D shape variables show sufficiently strong distortion to influence the outcome of the hypothesis tests regarding the relationship between mouth size and feeding ecology. Only the 3D data support previous studies which showed that large mouth sizes correlate positively with high percentages of elusive prey in the diet. When used to test for morphological divergence, 3D data show no evidence of divergence, while 2D data show that one clade of oligocottines has diverged from all others. This clade shows the greatest degree of z-axis body depth within Oligocottinae, and we conclude that the inability of the 2D approach to capture this lateral body depth causes the incongruence between 2D and 3D analyses. Anat Rec, 301:806-818, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.
Subsurface Investigation using 2D Resistivity and Ground Penetrating Radar at Teluk Kumbar, Penang
Teoh, YJ; Bruka, MA; Idris, NM; Ismail, NA; Muztaza, NM
2018-04-01
The objective of this study is to determine the structure and condition of the subsurface by using 2D resistivity and Ground Penetrating Radar (GPR) methods. The study was conducted at SK Sungai Batu, Teluk Kumbar, Penang Island. For 2D resistivity method, Wenner-Schlumberger array was used while for GPR, 250 MHz antenna was used at the site. The survey consists of 200m length survey line. GPR result shows that there is high intensity of EM. 2D resistivity result shows that the low resistivity region (200 Ωm to 340 Ωm) appears to be at the centre of the survey line from depth 7 m to 13 m. Meanwhile, the higher resistivity region (4000 Ωm to 6000 Ωm) may indicate the bedrock structure of the subsurface, which is the granitic rock. This region is bedrock which rested at depth 14 m and below. In conclusion, data obtained from GPR and 2D resistivity methods can be easily correlated to determine the features of the subsurface.
International Nuclear Information System (INIS)
Jung, Young Mee
2003-01-01
Principal component analysis based two-dimensional (PCA-2D) correlation analysis is applied to FTIR spectra of polystyrene/methyl ethyl ketone/toluene solution mixture during the solvent evaporation. Substantial amount of artificial noise were added to the experimental data to demonstrate the practical noise-suppressing benefit of PCA-2D technique. 2D correlation analysis of the reconstructed data matrix from PCA loading vectors and scores successfully extracted only the most important features of synchronicity and asynchronicity without interference from noise or insignificant minor components. 2D correlation spectra constructed with only one principal component yield strictly synchronous response with no discernible a asynchronous features, while those involving at least two or more principal components generated meaningful asynchronous 2D correlation spectra. Deliberate manipulation of the rank of the reconstructed data matrix, by choosing the appropriate number and type of PCs, yields potentially more refined 2D correlation spectra
Structural Theory and Classification of 2D Adinkras
International Nuclear Information System (INIS)
Iga, Kevin; Zhang, Yan X.
2016-01-01
Adinkras are combinatorial objects developed to study (1-dimensional) supersymmetry representations. Recently, 2D Adinkras have been developed to study 2-dimensional supersymmetry. In this paper, we classify all 2D Adinkras, confirming a conjecture of T. Hübsch. Along the way, we obtain other structural results, including a simple characterization of Hübsch’s even-split doubly even codes.
The relation between Euclidean and Lorentzian 2D quantum gravity
Ambjørn, J.; Correia, J.; Kristjansen, C.; Loll, R.
1999-01-01
Starting from 2D Euclidean quantum gravity, we show that one recovers 2D Lorentzian quantum gravity by removing all baby universes. Using a peeling procedure to decompose the discrete, triangulated geometries along a one-dimensional path, we explicitly associate with each Euclidean space-time a
2D gravity, random surfaces and all that
International Nuclear Information System (INIS)
Ambjoern, J.
1990-11-01
I review the recent progress in 2d gravity and discuss the new numerical simulations for 2d gravity and for random surfaces in d>2. The random surface theories of interest in d>2 have extrinsic curvature terms, and for a finite value of the extrinsic curvature coupling there seems to be a second order phase transition where the string tension scales. (orig.)
Cascading Constrained 2-D Arrays using Periodic Merging Arrays
DEFF Research Database (Denmark)
Forchhammer, Søren; Laursen, Torben Vaarby
2003-01-01
We consider a method for designing 2-D constrained codes by cascading finite width arrays using predefined finite width periodic merging arrays. This provides a constructive lower bound on the capacity of the 2-D constrained code. Examples include symmetric RLL and density constrained codes...
From 2D Lithography to 3D Patterning
Van Zeijl, H.W.; Wei, J.; Shen, C.; Verhaar, T.M.; Sarro, P.M.
2010-01-01
Lithography as developed for IC device fabrication is a high volume high accuracy patterning technology with strong 2 dimensional (2D) characteristics. This 2D nature makes it a challenge to integrate this technology in a 3 dimensional (3D) manufacturing environment. This article addresses the
Synthesis and chemistry of elemental 2D materials
Energy Technology Data Exchange (ETDEWEB)
Mannix, Andrew J.; Kiraly, Brian; Hersam, Mark C.; Guisinger, Nathan P.
2017-01-25
2D materials have attracted considerable attention in the past decade for their superlative physical properties. These materials consist of atomically thin sheets exhibiting covalent in-plane bonding and weak interlayer and layer-substrate bonding. Following the example of graphene, most emerging 2D materials are derived from structures that can be isolated from bulk phases of layered materials, which form a limited library for new materials discovery. Entirely synthetic 2D materials provide access to a greater range of properties through the choice of constituent elements and substrates. Of particular interest are elemental 2D materials, because they provide the most chemically tractable case for synthetic exploration. In this Review, we explore the progress made in the synthesis and chemistry of synthetic elemental 2D materials, and offer perspectives and challenges for the future of this emerging field.
2D nanomaterials assembled from sequence-defined molecules
International Nuclear Information System (INIS)
Mu, Peng; State University of New York; Zhou, Guangwen; Chen, Chun-Long
2017-01-01
Two dimensional (2D) nanomaterials have attracted broad interest owing to their unique physical and chemical properties with potential applications in electronics, chemistry, biology, medicine and pharmaceutics. Due to the current limitations of traditional 2D nanomaterials (e.g., graphene and graphene oxide) in tuning surface chemistry and compositions, 2D nanomaterials assembled from sequence-defined molecules (e.g., DNAs, proteins, peptides and peptoids) have recently been developed. They represent an emerging class of 2D nanomaterials with attractive physical and chemical properties. Here, we summarize the recent progress in the synthesis and applications of this type of sequence-defined 2D nanomaterials. We also discuss the challenges and opportunities in this new field.
Solar radio emissions: 2D full PIC simulations
Pierre, H.; Sgattoni, A.; Briand, C.; Amiranoff, F.; Riconda, C.
2016-12-01
Solar radio emissions are electromagnetic waves observed at the local plasma frequency and/or at twice the plasma frequency. To describe their origin a multi-stage model has been proposed by Ginzburg & Zhelezniakov (1958) and further developed by several authors, which consider a succession of non-linear three-wave interaction processes. Electron beams accelerated by solar flares travel in the interplanetary plasma and provide the free energy for the development of plasma instabilities. The model describes how part of the free energy of these beams can be transformed in a succession of plasma waves and eventually into electromagnetic waves. Following the work of Thurgood & Tsiklauri (2015) we performed several 2D Particle In Cell simulations. The simulations follow the entire set of processes from the electron beam propagation in the background plasma to the generation of the electromagnetic waves in particular the 2ωp emission, including the excitation of the low frequency waves. As suggested by Thurgood & Tsiklauri (2015) it is possible to identify regimes where the radiation emission can be directly linked to the electron beams. Our attention was devoted to estimate the conversion efficiency from electron kinetic energy to the em energy, and the growth rate of the several processes which can be identified. We studied the emission angles of the 2ωpradiation and compared them with the theoretical predictions of Willes et. al. (1995). We also show the role played by some numerical parameters i.e. the size and shape of the simulation box. This work is the first step to prepare laser-plasma experiments. V. L. Ginzburg, V. V. Zhelezniakov On the Possible Mechanisms of Sporadic Solar Radio Emission (Radiation in an Isotropic Plasma) Soviet Astronomy, Vol. 2, p.653 (1958) J. O. Thurgood and D. Tsiklauri Self-consistent particle-in-cell simulations of funda- mental and harmonic plasma radio emission mechanisms. Astronomy & Astrophysics 584, A83 (2015). A. Willes, P
Directory of Open Access Journals (Sweden)
Ram\\u00F3n Le\\u00F3n
2001-01-01
Full Text Available Se muestrearon cuatro lotes con diferente textura de suelo, sembrados con caña de azúcar durante cuatro años consecutivos. El lote A con suelo franco arcilloso, el lote B con suelo franco arenoso, el lote C con suelo arcilloso y el lote D con suelo franco. Se seleccionaron lotes con una población de R. cochinchinensis de 75 a 150 plantas/ m2. Se contó el número de plantas de la maleza en un área de 0,25 m2, en dos micro-hábitats: el surco y entre-surco. A cada planta se le escarbó el suelo que la rodeaba hasta encontrar la semilla de la que provenía y se midió la profundidad a la que ésta se encontró, para luego determinar qué porcentaje del total de plantas contabilizadas provenía de semillas localizadas en cada uno de los siguientes estratos: 0,0; >0,0 a 2,5; >2,5 a 5,0; >5,0 a 10 y >10,0 a 15,0 cm de profundidad. Además, se evaluó en invernadero el efecto de cada profundidad de los estratos citados. A nivel de laboratorio y en platos Petri, se evaluó el efecto de la luz y la oscuridad sobre la germinación de la semilla de R. cochinchinensis. Se encontró que la mayoría de las plantas en campo provenían de semillas que se encontraban de >0 a 2,5 cm, seguido por aquellas que estaban de >2,5 a 5,0 cm donde se dieron las mejores condiciones para la germinación. No se observaron diferencias entre los tipos de suelo o los micro-hábitats evaluados. En invernadero el tratamiento a 0,0 cm fue el que mostró la mayor germinación y esto fue producto de la exposición a la luz, lo cual se corroboró en el estudio en laboratorio donde el tratamiento con luz presentó también, la mayor germinación
From 3 d duality to 2 d duality
Aharony, Ofer; Razamat, Shlomo S.; Willett, Brian
2017-11-01
In this paper we discuss 3 d N = 2 supersymmetric gauge theories and their IR dualities when they are compactified on a circle of radius r, and when we take the 2 d limit in which r → 0. The 2 d limit depends on how the mass parameters are scaled as r → 0, and often vacua become infinitely distant in the 2 d limit, leading to a direct sum of different 2 d theories. For generic mass parameters, when we take the same limit on both sides of a duality, we obtain 2 d dualities (between gauge theories and/or Landau-Ginzburg theories) that pass all the usual tests. However, when there are non-compact branches the discussion is subtle because the metric on the moduli space, which is not controlled by supersymmetry, plays an important role in the low-energy dynamics after compactification. Generally speaking, for IR dualities of gauge theories, we conjecture that dualities involving non-compact Higgs branches survive. On the other hand when there is a non-compact Coulomb branch on at least one side of the duality, the duality fails already when the 3 d theories are compactified on a circle. Using the valid reductions we reproduce many known 2 d IR dualities, giving further evidence for their validity, and we also find new 2 d dualities.
Optimization and practical implementation of ultrafast 2D NMR experiments
Energy Technology Data Exchange (ETDEWEB)
Queiroz Junior, Luiz H. K., E-mail: professorkeng@gmail.com [Universidade Federal de Sao Carlos (UFSC), SP (Brazil). Departamento de Quimica; Universidade Federal de Goias (UFGO), Goiania, GO (Brazil). Inst. de Quimica; Ferreira, Antonio G. [Universidade Federal de Sao Carlos (UFSC), SP (Brazil). Departamento de Quimica; Giraudeau, Patrick [Universite de Nantes (France). CNRS, Chimie et Interdisciplinarite: Synthese, Analyse, Modelisation
2013-09-01
Ultrafast 2D NMR is a powerful methodology that allows recording of a 2D NMR spectrum in a fraction of second. However, due to the numerous non-conventional parameters involved in this methodology its implementation is no trivial task. Here, an optimized experimental protocol is carefully described to ensure efficient implementation of ultrafast NMR. The ultrafast spectra resulting from this implementation are presented based on the example of two widely used 2D NMR experiments, COSY and HSQC, obtained in 0.2 s and 41 s, respectively. (author)
Kalman Filter for Generalized 2-D Roesser Models
Institute of Scientific and Technical Information of China (English)
SHENG Mei; ZOU Yun
2007-01-01
The design problem of the state filter for the generalized stochastic 2-D Roesser models, which appears when both the state and measurement are simultaneously subjected to the interference from white noise, is discussed. The wellknown Kalman filter design is extended to the generalized 2-D Roesser models. Based on the method of "scanning line by line", the filtering problem of generalized 2-D Roesser models with mode-energy reconstruction is solved. The formula of the optimal filtering, which minimizes the variance of the estimation error of the state vectors, is derived. The validity of the designed filter is verified by the calculation steps and the examples are introduced.
Effective viscosity of 2D suspensions - Confinement effects
Doyeux , Vincent; Priem , Stephane; Jibuti , Levan; Farutin , Alexander; Ismail , Mourad; Peyla , Philippe
2016-01-01
International audience; We study the rheology of a sheared 2D suspension of non-Brownian disks in presence of walls. Although, it is of course possible today with modern computers and powerful algorithms to perform direct numerical simulations that fully account for multiparticle 3D interactions in the presence of walls, the analysis of the simple case of a 2D suspension, provides valuable insights and helps to understand 3D results. Thanks to the direct visualization of the whole 2D flow (th...
Wearable energy sources based on 2D materials.
Yi, Fang; Ren, Huaying; Shan, Jingyuan; Sun, Xiao; Wei, Di; Liu, Zhongfan
2018-05-08
Wearable energy sources are in urgent demand due to the rapid development of wearable electronics. Besides flexibility and ultrathin thickness, emerging 2D materials present certain extraordinary properties that surpass the properties of conventional materials, which make them advantageous for high-performance wearable energy sources. Here, we provide a comprehensive review of recent advances in 2D material based wearable energy sources including wearable batteries, supercapacitors, and different types of energy harvesters. The crucial roles of 2D materials in the wearable energy sources are highlighted. Based on the current progress, the existing challenges and future prospects are outlined and discussed.
Introduction to game physics with Box2D
Parberry, Ian
2013-01-01
Written by a pioneer of game development in academia, Introduction to Game Physics with Box2D covers the theory and practice of 2D game physics in a relaxed and entertaining yet instructional style. It offers a cohesive treatment of the topics and code involved in programming the physics for 2D video games. Focusing on writing elementary game physics code, the first half of the book helps you grasp the challenges of programming game physics from scratch, without libraries or outside help. It examines the mathematical foundation of game physics and illustrates how it is applied in practice thro
Directory of Open Access Journals (Sweden)
Mónica Núñez Flores
2010-10-01
Full Text Available Las esponjas son uno de los grupos de animales sésiles más abundantes y diversos de los fondos marinos tropicales, siendo un componente importante en los arrecifes coralinos, aunque poco estudiado a nivel de especies. El objetivo de este estudio fue caracterizar la comunidad de esponjas en el gradiente de profundidad de un arrecife coralino en Isla Larga, Parque Nacional San Esteban, Venezuela. Se trabajaron siete profundidades (1, 3, 6, 9, 12, 15 y 18m donde se midió la sedimentación neta y bruta, el índice de rugosidad, y se evaluó la riqueza, densidad y cobertura de las esponjas. Se identificaron 17 especies en 10 familias. La mayor densidad y cobertura se encontró a los 6m (6.03ind/m2, 11%, coincidiendo con la mínima sedimentación neta y la máxima rugosidad del sustrato. Las especies más abundantes fueron Desmapsamma anchorata, Amphimedon erina y Scopalina rueztleri. El análisis de componentes principales arrojó una separación de esta comunidad en 3 zonas, la somera (1 y 3m, donde las esponjas están sometidas a una tensión producida por el oleaje y alta iluminación, y las zonas media (6, 9 y 12m y profunda (15 y 18m, con características más favorables, dada una menor iluminación y sedimentación.
32 CFR 1639.4 - Exclusion from Class 2-D.
2010-07-01
... recognized; or (c) He ceases to be a full-time student; or (d) He fails to maintain satisfactory academic... Class 2-D when: (a) He fails to establish that the theological or divinity school is a recognized school...
Proteome analysis of human colorectal cancer tissue using 2-D ...
African Journals Online (AJOL)
Jane
2010-10-11
Oct 11, 2010 ... protein spots were identified by mass spectrometric analysis. The cDNA of the ..... sensitivity, dynamic range and reproducibility vs the conventional 2-D ... linkage, and also has molecular chaperones activity for inhibiting the ...
National Aeronautics and Space Administration — The MAC0NXASM or const_2d_asm_Nx data product is the MERRA Data Assimilation System 2-Dimensional Constants at native resolution. MERRA, or the Modern Era...
National Aeronautics and Space Administration — The MAC0FXCHM or const_2d_chm_Fx data product is the MERRA Data Assimilation System 2-Dimensional Constants at native Fv resolution. MERRA, or the Modern Era...
Optical identification using imperfections in 2D materials
Cao, Yameng; Robson, Alexander J.; Alharbi, Abdullah; Roberts, Jonathan; Woodhead, Christopher S.; Noori, Yasir J.; Bernardo-Gavito, Ramón; Shahrjerdi, Davood; Roedig, Utz; Fal'ko, Vladimir I.; Young, Robert J.
2017-12-01
The ability to uniquely identify an object or device is important for authentication. Imperfections, locked into structures during fabrication, can be used to provide a fingerprint that is challenging to reproduce. In this paper, we propose a simple optical technique to read unique information from nanometer-scale defects in 2D materials. Imperfections created during crystal growth or fabrication lead to spatial variations in the bandgap of 2D materials that can be characterized through photoluminescence measurements. We show a simple setup involving an angle-adjustable transmission filter, simple optics and a CCD camera can capture spatially-dependent photoluminescence to produce complex maps of unique information from 2D monolayers. Atomic force microscopy is used to verify the origin of the optical signature measured, demonstrating that it results from nanometer-scale imperfections. This solution to optical identification with 2D materials could be employed as a robust security measure to prevent counterfeiting.
Soluble NKG2D ligands: prevalence, release, and functional impact.
Salih, Helmut Rainer; Holdenrieder, Stefan; Steinle, Alexander
2008-05-01
Natural Killer (NK) cells are capable to recognize and eliminate malignant cells. Anti-tumor responses of NK cells are promoted by the tumor-associated expression of cell stress-inducible ligands of the activating NK receptor NKG2D. Current evidence suggests that established tumors subvert NKG2D-mediated tumor immunosurveillance by releasing NKG2D ligands (NKG2DL). Release of NKG2DL has been observed in a broad variety of human tumor entities and is thought to interfere with NKG2D-mediated tumor immunity in several ways. Further, levels of soluble NKG2DL (sNKG2DL) were also found to be elevated under various non-malignant conditions, although the functional implications remain largely unclear. Here we review and discuss the available data on the prevalence, release, functional impact, and potential clinical value of sNKG2DL.
Isotropic 2D quadrangle meshing with size and orientation control
Pellenard, Bertrand; Alliez, Pierre; Morvan, Jean-Marie
2011-01-01
We propose an approach for automatically generating isotropic 2D quadrangle meshes from arbitrary domains with a fine control over sizing and orientation of the elements. At the heart of our algorithm is an optimization procedure that, from a coarse
Excitons in atomically thin 2D semiconductors and their applications
Xiao, Jun; Zhao, Mervin; Wang, Yuan; Zhang, Xiang
2017-06-01
The research on emerging layered two-dimensional (2D) semiconductors, such as molybdenum disulfide (MoS2), reveals unique optical properties generating significant interest. Experimentally, these materials were observed to host extremely strong light-matter interactions as a result of the enhanced excitonic effect in two dimensions. Thus, understanding and manipulating the excitons are crucial to unlocking the potential of 2D materials for future photonic and optoelectronic devices. In this review, we unravel the physical origin of the strong excitonic effect and unique optical selection rules in 2D semiconductors. In addition, control of these excitons by optical, electrical, as well as mechanical means is examined. Finally, the resultant devices such as excitonic light emitting diodes, lasers, optical modulators, and coupling in an optical cavity are overviewed, demonstrating how excitons can shape future 2D optoelectronics.
Tailored Assembly of 2D Heterostructures beyond Graphene
2017-05-11
attainable. Here we propose our synthetic approach to construct graphene-based 3D heterostructures composed of 2D layered materials with finely tunable...DISTRIBUTION A: Distribution approved for public release. AF Office Of Scientific Research (AFOSR)/ IOA Arlington, Virginia 22203 Air Force Research ...Public Release 13. SUPPLEMENTARY NOTES 14. ABSTRACT Rapid progress in graphene research has attracted further research attentions for other 2D layered
Proteasome modulator 9 and macrovascular pathology of T2D
Directory of Open Access Journals (Sweden)
Gragnoli Claudia
2011-04-01
Full Text Available Abstract Aims Coronary artery disease (CAD and stroke share a major linkage at the chromosome 12q24 locus. The same chromosome region entails at least a major risk gene for type 2 diabetes (T2D within NIDDM2, the non-insulin-dependent-diabetes 2 locus. The gene of Proteasome Modulator 9 (PSMD9 lies in the NIDDM2 region and is implicated in diabetes in mice. PSMD9 mutations rarely cause T2D and common variants are linked to both late-onset T2D and maturity-onset-diabetes of the young (MODY3. In this study, we aimed at determining whether PSMD9 is linked to macrovascular pathology of T2D. Methods and Results In our 200 T2D families from Italy, we characterized the clinical phenotype of macrovascular pathology by defining the subjects for presence or absence of CAD, stroke and/or transitory ischemic attacks (TIA, plaques of the large arterial vessels (macro-vasculopathy and arterial angioplasty performance. We then screened 200 T2D siblings/families for PSMD9 +nt460A/G, +nt437C/T and exon E197G A/G single nucleotide polymorphisms (SNPs and performed a non-parametric linkage study to test for linkage for coronary artery disease, stroke/TIA, macro-vasculopathy and macrovascular pathology of T2D. We performed 1,000 replicates to test the power of our significant results. Our results show a consistent significant LOD score in linkage with all the above-mentioned phenotypes. Our 1000 simulation analyses, performed for each single test, confirm that the results are not due to random chance. Conclusions In summary, the PSMD9 IVS3+nt460A/G, +nt437C/T and exon E197G A/G SNPs are linked to CAD, stroke/TIA and macrovascular pathology of T2D in Italians.
Photonics of 2D gold nanolayers on sapphire surface
Energy Technology Data Exchange (ETDEWEB)
Muslimov, A. E., E-mail: amuslimov@mail.ru; Butashin, A. V.; Nabatov, B. V. [Russian Academy of Sciences, Shubnikov Institute of Crystallography, Federal Research Center “Crystallography and Photonics” (Russian Federation); Konovko, A. A.; Belov, I. V.; Gizetdinov, R. M.; Andreev, A. V. [Moscow State University (Russian Federation); Kanevsky, V. M. [Russian Academy of Sciences, Shubnikov Institute of Crystallography, Federal Research Center “Crystallography and Photonics” (Russian Federation)
2017-03-15
Gold layers with thicknesses of up to several nanometers, including ordered and disordered 2D nanostructures of gold particles, have been formed on sapphire substrates; their morphology is described; and optical investigations are carried out. The possibility of increasing the accuracy of predicting the optical properties of gold layers and 2D nanostructures using quantum-mechanical models based on functional density theory calculation techniques is considered. The application potential of the obtained materials in photonics is estimated.
Large scale 2D spectral compressed sensing in continuous domain
Cai, Jian-Feng
2017-06-20
We consider the problem of spectral compressed sensing in continuous domain, which aims to recover a 2-dimensional spectrally sparse signal from partially observed time samples. The signal is assumed to be a superposition of s complex sinusoids. We propose a semidefinite program for the 2D signal recovery problem. Our model is able to handle large scale 2D signals of size 500 × 500, whereas traditional approaches only handle signals of size around 20 × 20.
Large scale 2D spectral compressed sensing in continuous domain
Cai, Jian-Feng; Xu, Weiyu; Yang, Yang
2017-01-01
We consider the problem of spectral compressed sensing in continuous domain, which aims to recover a 2-dimensional spectrally sparse signal from partially observed time samples. The signal is assumed to be a superposition of s complex sinusoids. We propose a semidefinite program for the 2D signal recovery problem. Our model is able to handle large scale 2D signals of size 500 × 500, whereas traditional approaches only handle signals of size around 20 × 20.
Maximizing the Optical Band Gap in 2D Photonic Crystals
DEFF Research Database (Denmark)
Hougaard, Kristian G.; Sigmund, Ole
Topology optimization is used to find the 2D photonic crystal designs with the largest relative photonic band gaps. Starting points for the topology optimization are found with an exhaustive binary search on a low resolution grid.......Topology optimization is used to find the 2D photonic crystal designs with the largest relative photonic band gaps. Starting points for the topology optimization are found with an exhaustive binary search on a low resolution grid....
Benchmarking of FA2D/PARCS Code Package
International Nuclear Information System (INIS)
Grgic, D.; Jecmenica, R.; Pevec, D.
2006-01-01
FA2D/PARCS code package is used at Faculty of Electrical Engineering and Computing (FER), University of Zagreb, for static and dynamic reactor core analyses. It consists of two codes: FA2D and PARCS. FA2D is a multigroup two dimensional transport theory code for burn-up calculations based on collision probability method, developed at FER. It generates homogenised cross sections both of single pins and entire fuel assemblies. PARCS is an advanced nodal code developed at Purdue University for US NRC and it is based on neutron diffusion theory for three dimensional whole core static and dynamic calculations. It is modified at FER to enable internal 3D depletion calculation and usage of neutron cross section data in a format produced by FA2D and interface codes. The FA2D/PARCS code system has been validated on NPP Krsko operational data (Cycles 1 and 21). As we intend to use this code package for development of IRIS reactor loading patterns the first logical step was to validate the FA2D/PARCS code package on a set of IRIS benchmarks, starting from simple unit fuel cell, via fuel assembly, to full core benchmark. The IRIS 17x17 fuel with erbium burnable absorber was used in last full core benchmark. The results of modelling the IRIS full core benchmark using FA2D/PARCS code package have been compared with reference data showing the adequacy of FA2D/PARCS code package model for IRIS reactor core design.(author)
2d forward modelling of marine CSEM survey geometry for seabed logging
International Nuclear Information System (INIS)
Hussain, N.; Noh, M.; Yahya, N.B.
2011-01-01
Hydrocarbon reserve exploration in deep water is done by geophysical surveys. Previously seismic geophysical surveys were explicitly used but it has indistinct results for both water and hydrocarbon saturated reservoir. Recent development for the detection of hydrocarbon reservoir in deeper water is Marine Controlled Source Electromagnetic (MCSEM) geophysical survey. MCSEM is sensitive to electrical conductivity of rocks by which it can differentiate between hydrocarbon reservoir and water saturated reservoir. MCSEM survey geometry put vital role and may causes for anomalies in synthetic data. Consequentially MCSEM is sensitive to survey geometry (e.g. source dipping, rotation and speed, receivers' orientation etc) which causes anomalies. The interpretation for delineating subsurface structure from survey data need to well understand the effects of survey geometry anomalies. Forward modelling is an alternative rather real time survey to study the aforementioned anomalies. In this paper finite difference method (FDM) is implemented for 2D forward modelling in the sense of qualitative understanding to how induced Electromagnetic (EM) signal changes its overall pattern while interact with physical earth properties. A stratified earth structure is developed and modelled in MatLabTM software to study the behaviour of EM field with physical earth properties. Obtained results of 2D geological models are also discussed in this paper. (author)
Microwave tomography of extremities: 1. Dedicated 2D system and physiological signatures
International Nuclear Information System (INIS)
Semenov, Serguei; Nair, Bindu; Kellam, James; Williams, Thomas; Quinn, Michael; Sizov, Yuri; Nazarov, Alexei; Pavlovsky, Andrey; Posukh, Vitaly
2011-01-01
Microwave tomography (MWT) is a novel imaging modality which might be applicable for non-invasive assessment of functional and pathological conditions of biological tissues. Imaging of the soft tissue of extremities is one of its potential applications. The feasibility of this technology for such applications was demonstrated earlier. This is the first of two companion papers focused on an application of MWT for imaging of the extremity's soft tissues. The goal of this study is to assess the technical performance of the developed 2D MWT system dedicated for imaging of functional and pathological conditions of the extremity's soft tissues. Specifically, the system's performance was tested by its ability to detect signals associated with physiological activity and soft tissue interventions (circulatory related changes, blood flow reduction and a simulated compartmental syndrome)-the so-called physiological signatures. The developed 2D MWT system dedicated to the imaging of animal extremities demonstrates good technical performance allowing for stable and predictable data acquisition with reasonable agreement between the experimentally measured electromagnetic (EM) field and the simulated EM field within a measurement domain. Using the system, we were able to obtain physiological signatures associated with systolic versus diastolic phases of circulation in an animal extremity, reperfusion versus occlusion phases of the blood supply to the animal's extremity and a compartment syndrome. The imaging results are presented and discussed in the second companion paper.
CYP2D6 variability in populations from Venezuela.
Moreno, Nancy; Flores-Angulo, Carlos; Villegas, Cecilia; Mora, Yuselin
2016-12-01
CYP2D6 is an important cytochrome P450 enzyme that plays an important role in the metabolism of about 25% of currently prescribed drugs. The presence of polymorphisms in the CYP2D6 gene may modulate enzyme level and activity, thereby affecting individual responses to pharmacological treatments. The most prevalent diseases in the admixed population from Venezuela are cardiovascular and cancer, whereas viral, bacterial and parasitic diseases, particularly malaria, are prevalent in Amerindian populations; in the treatment of these diseases, several drugs that are metabolized by CYP2D6 are used. In this work, we reviewed the data on CYP2D6 variability and predicted metabolizer phenotypes, in healthy volunteers of two admixed and five Amerindian populations from Venezuela. The Venezuelan population is very heterogeneous as a result of the genetic admixture of three major ethnical components: Europeans, Africans and Amerindians. There are noticeable inter-regional and inter-population differences in the process of mixing of this population. Hitherto, there are few published studies in Venezuela on CYP2D6; therefore, it is necessary to increase research in this regard, in particular to develop studies with a larger sample size. There is a considerable amount of work remaining before CYP2D6 is integrated into clinical practice in Venezuela.
Dirac Magnon Nodal Loops in Quasi-2D Quantum Magnets.
Owerre, S A
2017-07-31
In this report, we propose a new concept of one-dimensional (1D) closed lines of Dirac magnon nodes in two-dimensional (2D) momentum space of quasi-2D quantum magnetic systems. They are termed "2D Dirac magnon nodal-line loops". We utilize the bilayer honeycomb ferromagnets with intralayer coupling J and interlayer coupling J L , which is realizable in the honeycomb chromium compounds CrX 3 (X ≡ Br, Cl, and I). However, our results can also exist in other layered quasi-2D quantum magnetic systems. Here, we show that the magnon bands of the bilayer honeycomb ferromagnets overlap for J L ≠ 0 and form 1D closed lines of Dirac magnon nodes in 2D momentum space. The 2D Dirac magnon nodal-line loops are topologically protected by inversion and time-reversal symmetry. Furthermore, we show that they are robust against weak Dzyaloshinskii-Moriya interaction Δ DM magnon edge modes.
Directory of Open Access Journals (Sweden)
Milena Sampaio Cintra de Albuquerque
Full Text Available A iluminação natural, além de ser importante recurso para promover bem-estar e qualidade ambiental, tem impacto relevante na redução do uso de energia. O Regulamento Técnico da Qualidade do Nível de Eficiência Energética de Edifícios Residenciais (RTQ-R foi publicado no Brasil em agosto de 2010, dando sequência ao Programa Brasileiro de Etiquetagem do Inmetro voltado para edificações. Com relação a aspectos bioclimáticos da arquitetura dos edifícios, tais como iluminação natural, buscou-se desenvolver alguns pré-requisitos e bonificações para os ambientes, de forma que esses aspectos fossem considerados na avaliação de edificações residenciais. Neste artigo, apresentam-se o método e os resultados que geraram as indicações relativas à bonificação de iluminação natural presentes no Regulamento. O método utilizado incluiu 336 simulações computacionais dinâmicas com o software DaySim, com o objetivo de investigar a influência de variáveis arquitetônicas no desempenho da iluminação natural, mais especificamente a profundidade dos ambientes e as proteções solares. As simulações foram realizadas para 11 cidades brasileiras, abarcando 11 diferentes latitudes e 4 zonas bioclimáticas (ZB 1 , ZB 3, ZB 4 e ZB 4. Os resultados geraram indicações sobre a profundidade-limite de ambientes, que foram adotadas como parâmetros para concessão da bonificação de iluminação natural no RTQ-R.
Optimization of FIBMOS Through 2D Silvaco ATLAS and 2D Monte Carlo Particle-based Device Simulations
Kang, J.; He, X.; Vasileska, D.; Schroder, D. K.
2001-01-01
Focused Ion Beam MOSFETs (FIBMOS) demonstrate large enhancements in core device performance areas such as output resistance, hot electron reliability and voltage stability upon channel length or drain voltage variation. In this work, we describe an optimization technique for FIBMOS threshold voltage characterization using the 2D Silvaco ATLAS simulator. Both ATLAS and 2D Monte Carlo particle-based simulations were used to show that FIBMOS devices exhibit enhanced current drive ...
A pooled analysis of CYP2D6 genotype in breast cancer prevention trials of low-dose tamoxifen.
Johansson, Harriet; Gandini, Sara; Serrano, Davide; Gjerde, Jennifer; Lattanzi, Monia; Macis, Debora; Guerrieri-Gonzaga, Aliana; Aristarco, Valentina; Mellgren, Gunnar; Lien, Ernst; DeCensi, Andrea; Bonanni, Bernardo
2016-08-01
Decreased CYP2D6 activity is associated with lower levels of active tamoxifen metabolites. We examined the impact of CYP2D6 genotype on tamoxifen pharmacokinetics, biomarker activity, and efficacy in a pooled analysis of low-dose tamoxifen. Four randomized breast cancer prevention trials of very-low-dose (1 mg/day, n = 52 or 10 mg/week, n = 152) or low-dose tamoxifen (5 mg/day, n = 171) were pooled. DNA from 367 subjects was genotyped for CYP2D6 alleles associated with absent (PM allele: *3, *4, *5, *6, *7, *8, *12, and *14), reduced (IM allele: *9, *10, *17, *29, *41), normal (EM allele), or increased (UM: *XN) enzyme activity. Associations of tamoxifen, metabolites, activity biomarkers, and event-free survival with rapid (UM/EM, UM/IM, EM/EM, EM/IM, or EM/PM alleles) versus slow metabolizers (PM/IM or PM/PM) were investigated through random effects models, with 'study' as the random factor, and Cox regression models, adjusting for confounders. Rapid metabolizers had higher endoxifen levels than slow metabolizers: 15.3 versus 12.2 ng/mL (P = 0.018) with 5 mg/day, and 3.8 versus 2.8 ng/mL (P = 0.004) with 1 mg/day or 10 mg/week tamoxifen. The IGF-I decrease correlated with endoxifen (P = 0.002) and 4-hydroxytamoxifen levels, demonstrating steeper decreases at higher metabolite levels (P = 0.001). After a median follow-up of 12 years, rapid metabolizers with prior history of breast neoplasms allocated to tamoxifen 5 mg/day had a 60 % reduction of risk of recurrences (HR = 0.40, 95 % CI: 0.16-0.99) compared to slow metabolizers. CYP2D6 genotype may have an impact on tamoxifen efficacy at low doses. Trials investigating tamoxifen dose adjustments based on the woman's hormonal context and CYP2D6 genotype are warranted.
2-D Clinostat for Simulated Microgravity Experiments with Arabidopsis Seedlings
Wang, Hui; Li, Xugang; Krause, Lars; Görög, Mark; Schüler, Oliver; Hauslage, Jens; Hemmersbach, Ruth; Kircher, Stefan; Lasok, Hanna; Haser, Thomas; Rapp, Katja; Schmidt, Jürgen; Yu, Xin; Pasternak, Taras; Aubry-Hivet, Dorothée; Tietz, Olaf; Dovzhenko, Alexander; Palme, Klaus; Ditengou, Franck Anicet
2016-04-01
Ground-based simulators of microgravity such as fast rotating 2-D clinostats are valuable tools to study gravity related processes. We describe here a versatile g-value-adjustable 2-D clinostat that is suitable for plant analysis. To avoid seedling adaptation to 1 g after clinorotation, we designed chambers that allow rapid fixation. A detailed protocol for fixation, RNA isolation and the analysis of selected genes is described. Using this clinostat we show that mRNA levels of LONG HYPOCOTYL 5 (HY5), MIZU-KUSSEI 1 (MIZ1) and microRNA MIR163 are down-regulated in 5-day-old Arabidopsis thaliana roots after 3 min and 6 min of clinorotation using a maximal reduced g-force of 0.02 g, hence demonstrating that this 2-D clinostat enables the characterization of early transcriptomic events during root response to microgravity. We further show that this 2-D clinostat is able to compensate the action of gravitational force as both gravitropic-dependent statolith sedimentation and subsequent auxin redistribution (monitoring D R5 r e v :: G F P reporter) are abolished when plants are clinorotated. Our results demonstrate that 2-D clinostats equipped with interchangeable growth chambers and tunable rotation velocity are suitable for studying how plants perceive and respond to simulated microgravity.
Recent mathematical developments in 2D correlation spectroscopy
Noda, I.
2000-03-01
Recent mathematical developments in the field of 2D correlation spectroscopy, especially those related to the statistical theory, are reported. The notion of correlation phase angle is introduced. The significance of correlation phase angle between dynamic fluctuations of signals measured at two different spectral variables may be linked to more commonly known statistical concepts, such as coherence and correlation coefficient. This treatment provides the direct mathematical connection between the synchronous 2D correlation spectrum with a continuous form of the variance-covariance matrix. Moreover, it gives the background for the formal definition of the disrelation spectrum, which may be used as a heuristic substitution for the asynchronous 2D spectrum. The 2D correlation intensity may be separated into two independent factors representing the normalized extent of signal fluctuation coherence (i.e., correlation coefficient) and the magnitude of spectral intensity changes (i.e., variance). Such separation offers a convenient way to artificially enhance the discriminating power of 2D correlation spectra.
Graphene based 2D-materials for supercapacitors
Palaniselvam, Thangavelu; Baek, Jong-Beom
2015-09-01
Ever-increasing energy demands and the depletion of fossil fuels are compelling humanity toward the development of suitable electrochemical energy conversion and storage devices to attain a more sustainable society with adequate renewable energy and zero environmental pollution. In this regard, supercapacitors are being contemplated as potential energy storage devices to afford cleaner, environmentally friendly energy. Recently, a great deal of attention has been paid to two-dimensional (2D) nanomaterials, including 2D graphene and its inorganic analogues (transition metal double layer hydroxides, chalcogenides, etc), as potential electrodes for the development of supercapacitors with high electrochemical performance. This review provides an overview of the recent progress in using these graphene-based 2D materials as potential electrodes for supercapacitors. In addition, future research trends including notable challenges and opportunities are also discussed.
Maximizing entropy of image models for 2-D constrained coding
DEFF Research Database (Denmark)
Forchhammer, Søren; Danieli, Matteo; Burini, Nino
2010-01-01
This paper considers estimating and maximizing the entropy of two-dimensional (2-D) fields with application to 2-D constrained coding. We consider Markov random fields (MRF), which have a non-causal description, and the special case of Pickard random fields (PRF). The PRF are 2-D causal finite...... context models, which define stationary probability distributions on finite rectangles and thus allow for calculation of the entropy. We consider two binary constraints and revisit the hard square constraint given by forbidding neighboring 1s and provide novel results for the constraint that no uniform 2...... £ 2 squares contains all 0s or all 1s. The maximum values of the entropy for the constraints are estimated and binary PRF satisfying the constraint are characterized and optimized w.r.t. the entropy. The maximum binary PRF entropy is 0.839 bits/symbol for the no uniform squares constraint. The entropy...
Approximate 2D inversion of airborne TEM data
DEFF Research Database (Denmark)
Christensen, N.B.; Wolfgram, Peter
2006-01-01
We propose an approximate two-dimensional inversion procedure for transient electromagnetic data. The method is a two-stage procedure, where data are first inverted with 1D multi-layer models. The 1D model section is then considered as data for the next inversion stage that produces the 2D model...... section. For moving platform data there is translational invariance and the second part of the inversion becomes a deconvolution. The convolution kernels are computed by perturbing one model element in an otherwise homogeneous 2D section and calculating full nonlinear responses. These responses...... are then inverted with 1D models to produce a 1D model section. This section is the convolution kernel for the deconvolution. Within its limitations, the approximate 2D inversion performs well. Theoretical modeling shows that it delivers model sections that are a definite improvement over 1D model sections...
Graphene based 2D-materials for supercapacitors
International Nuclear Information System (INIS)
Palaniselvam, Thangavelu; Baek, Jong-Beom
2015-01-01
Ever-increasing energy demands and the depletion of fossil fuels are compelling humanity toward the development of suitable electrochemical energy conversion and storage devices to attain a more sustainable society with adequate renewable energy and zero environmental pollution. In this regard, supercapacitors are being contemplated as potential energy storage devices to afford cleaner, environmentally friendly energy. Recently, a great deal of attention has been paid to two-dimensional (2D) nanomaterials, including 2D graphene and its inorganic analogues (transition metal double layer hydroxides, chalcogenides, etc), as potential electrodes for the development of supercapacitors with high electrochemical performance. This review provides an overview of the recent progress in using these graphene-based 2D materials as potential electrodes for supercapacitors. In addition, future research trends including notable challenges and opportunities are also discussed. (topical review)
Effective viscosity of 2D suspensions - Confinement effects
Peyla, Philippe; Priem, Stephane; Vincent, Doyeux; Farutin, Alexander; Ismail, Mourad
2014-11-01
We study the rheology of a sheared 2D suspension of non-Brownian disks in presence of walls. Although, it is of course possible today with modern computers and powerful algorithms to perform direct numerical simulations that fully account for multiparticle 3D interactions, the analysis of the simple case of a 2D suspension, provides valuable insights and helps to understand 3D results. For instance, we examine the role of particle-wall and particle-particle interactions in determining the rheology of confined sheared suspensions. In addition we evaluate the intrinsic viscosity as well as the contribution of hydrodynamic interactions to the dissipation as a function of a wide range of confinements. Thanks to the direct visualisation of the whole 2D Stokes flow, we are able to give a clear interpretation about the rheology of semi-dilute confined suspensions.
Theory of Magnetoelectric Properties of 2D Systems
Chen, S. C.; Wu, J. Y.; Lin, C. Y.; Lin, M. F.
2017-12-01
This book addresses important advances in diverse quantization phenomena. 'Theory of Magnetoelectric Properties of 2D Systems' develops the generalized tight-binding model in order to comprehend the rich quantization phenomena in 2D materials. The unusual effects, taken into consideration simultaneously, mainly come from the multi-orbital hybridization, the spin-orbital coupling, the intralayer and interlayer atomic interactions, the layer number, the stacking configuration, the site-energy difference, the magnetic field, and the electric field. The origins of the phenomena are discussed in depth, particularly focusing on graphene, tinene, phosphorene and MoS2, with a broader model also drawn. This model could be further used to investigate electronic properties of 1D and 3D condensed-matter systems, and this book will prove to be a valuable resource to researchers and graduate students working in 2D materials science.
MESH2D Grid generator design and use
Energy Technology Data Exchange (ETDEWEB)
Flach, G. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)
2017-10-31
Mesh2d is a Fortran90 program originally designed to generate two-dimensional structured grids of the form [x(i),y(i,j)] where [x,y] are grid coordinates identified by indices (i,j). x-coordinates depending only on index i implies strictly vertical x-grid lines, whereas the y-grid lines can undulate. Mesh2d also assigns an integer material type to each grid cell, mtyp(i,j), in a user-specified manner. The complete grid is specified through three separate input files defining the x(i), y(i,j), and mtyp(i,j) variations. Since the original development effort, Mesh2d has been extended to more general two-dimensional structured grids of the form [x(i,j),(i,j)].
Determination of slope failure using 2-D resistivity method
Muztaza, Nordiana Mohd; Saad, Rosli; Ismail, Nur Azwin; Bery, Andy Anderson
2017-07-01
Landslides and slope failure may give negative economic effects including the cost to repair structures, loss of property value and medical costs in the event of injury. To avoid landslide, slope failure and disturbance of the ecosystem, good and detailed planning must be done when developing hilly area. Slope failure classification and various factors contributing to the instability using 2-D resistivity survey conducted in Selangor, Malaysia are described. The study on landslide and slope failure was conducted at Site A and Site B, Selangor using 2-D resistivity method. The implications of the anticipated ground conditions as well as the field observation of the actual conditions are discussed. Nine 2-D resistivity survey lines were conducted in Site A and six 2-D resistivity survey lines with 5 m minimum electrode spacing using Pole-dipole array were performed in Site B. The data were processed using Res2Dinv and Surfer10 software to evaluate the subsurface characteristics. 2-D resistivity results from both locations show that the study areas consist of two main zones. The first zone is alluvium or highly weathered with the resistivity of 100-1000 Ωm at 20-70 m depth. This zone consists of saturated area (1-100 Ωm) and boulders with resistivity value of 1200-3000 Ωm. The second zone with resistivity values of > 3000 Ωm was interpreted as granitic bedrock. The study area was characterized by saturated zones, highly weathered zone, highly contain of sand and boulders that will trigger slope failure in the survey area. Based on the results obtained from the study findings, it can be concluded that 2-D resistivity method is useful method in determination of slope failure.
Quantum process tomography by 2D fluorescence spectroscopy
Energy Technology Data Exchange (ETDEWEB)
Pachón, Leonardo A. [Grupo de Física Atómica y Molecular, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín (Colombia); Department of Chemistry and Chemical Biology, Harvard University, Cambridge, Massachusetts 02138 (United States); Marcus, Andrew H. [Department of Chemistry and Biochemistry, Oregon Center for Optics, Institute of Molecular Biology, University of Oregon, Eugene, Oregon 97403 (United States); Aspuru-Guzik, Alán [Department of Chemistry and Chemical Biology, Harvard University, Cambridge, Massachusetts 02138 (United States)
2015-06-07
Reconstruction of the dynamics (quantum process tomography) of the single-exciton manifold in energy transfer systems is proposed here on the basis of two-dimensional fluorescence spectroscopy (2D-FS) with phase-modulation. The quantum-process-tomography protocol introduced here benefits from, e.g., the sensitivity enhancement ascribed to 2D-FS. Although the isotropically averaged spectroscopic signals depend on the quantum yield parameter Γ of the doubly excited-exciton manifold, it is shown that the reconstruction of the dynamics is insensitive to this parameter. Applications to foundational and applied problems, as well as further extensions, are discussed.
Quantum process tomography by 2D fluorescence spectroscopy
International Nuclear Information System (INIS)
Pachón, Leonardo A.; Marcus, Andrew H.; Aspuru-Guzik, Alán
2015-01-01
Reconstruction of the dynamics (quantum process tomography) of the single-exciton manifold in energy transfer systems is proposed here on the basis of two-dimensional fluorescence spectroscopy (2D-FS) with phase-modulation. The quantum-process-tomography protocol introduced here benefits from, e.g., the sensitivity enhancement ascribed to 2D-FS. Although the isotropically averaged spectroscopic signals depend on the quantum yield parameter Γ of the doubly excited-exciton manifold, it is shown that the reconstruction of the dynamics is insensitive to this parameter. Applications to foundational and applied problems, as well as further extensions, are discussed
Melting of 2D monatomic solids: Lennard-Jones system
International Nuclear Information System (INIS)
Yi, Y.M.; Guo, Z.C.
1987-09-01
The Lennard-Jones interaction has been introduced into the Collins mix lattice of 2D liquids. By means of rigorous calculation of the total potential and the free area, the Gibbs functions for 2D liquid and solid have been derived. The melting line obtained from the phase transition equation agrees quite well with the result of recent computer simulation experiments. The obtained reduced temperature of the triple point T* t =0.438 agrees with the data measured in experiments of some inert gas monolayers adsorbed on graphite as well as in computer simulation experiments. (author). 11 refs, 7 figs, 3 tabs
EEG simulation by 2D interconnected chaotic oscillators
International Nuclear Information System (INIS)
Kubany, Adam; Mhabary, Ziv; Gontar, Vladimir
2011-01-01
Research highlights: → ANN of 2D interconnected chaotic oscillators is explored for EEG simulation. → An inverse problem solution (PRCGA) is proposed. → Good matching between the simulated and experimental EEG signals has been achieved. - Abstract: An artificial neuronal network composed by 2D interconnected chaotic oscillators is explored for brain waves (EEG) simulation. For the inverse problem solution a parallel real-coded genetic algorithm (PRCGA) is proposed. In order to conduct thorough comparison between the simulated and target signal characteristics, a spectrum analysis of the signals is undertaken. A good matching between the theoretical and experimental EEG signals has been achieved. Numerical results of calculations are presented and discussed.
2-D emittance equation with acceleration and compression
International Nuclear Information System (INIS)
Hahn, K.D.; Smith, L.
1988-10-01
Since both acceleration and compression are required for an Inertial Fusion Driver, the understanding of their effect on the beam quality, emittance, is important. This report attempts to generalize the usual emittance formula for the drifting beam to include these effects. The derivation of the 2-D emittance equation is carried out and a comparison with the particle code results is given. The 2-D emittance at a given axial location is reasonable to consider for a long beam, particularly with velocity tilt; transverse emittance averaged over the entire bunch is not a useful quantity. 6 refs., 2 figs., 1 tab
Real-time 2-D Phased Array Vector Flow Imaging
DEFF Research Database (Denmark)
Holbek, Simon; Hansen, Kristoffer Lindskov; Fogh, Nikolaj
2018-01-01
Echocardiography examination of the blood flow is currently either restricted to 1-D techniques in real-time or experimental off-line 2-D methods. This paper presents an implementation of transverse oscillation for real-time 2-D vector flow imaging (VFI) on a commercial BK Ultrasound scanner....... A large field-of-view (FOV) sequence for studying flow dynamics at 11 frames per second (fps) and a sequence for studying peak systolic velocities (PSV) with a narrow FOV at 36 fps were validated. The VFI sequences were validated in a flow-rig with continuous laminar parabolic flow and in a pulsating flow...
Radiative heat transfer in 2D Dirac materials
International Nuclear Information System (INIS)
Rodriguez-López, Pablo; Tse, Wang-Kong; Dalvit, Diego A R
2015-01-01
We compute the radiative heat transfer between two sheets of 2D Dirac materials, including topological Chern insulators and graphene, within the framework of the local approximation for the optical response of these materials. In this approximation, which neglects spatial dispersion, we derive both numerically and analytically the short-distance asymptotic of the near-field heat transfer in these systems, and show that it scales as the inverse of the distance between the two sheets. Finally, we discuss the limitations to the validity of this scaling law imposed by spatial dispersion in 2D Dirac materials. (paper)
EEG simulation by 2D interconnected chaotic oscillators
Energy Technology Data Exchange (ETDEWEB)
Kubany, Adam, E-mail: adamku@bgu.ac.i [Department of Industrial Engineering and Management, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva 84105 (Israel); Mhabary, Ziv; Gontar, Vladimir [Department of Industrial Engineering and Management, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva 84105 (Israel)
2011-01-15
Research highlights: ANN of 2D interconnected chaotic oscillators is explored for EEG simulation. An inverse problem solution (PRCGA) is proposed. Good matching between the simulated and experimental EEG signals has been achieved. - Abstract: An artificial neuronal network composed by 2D interconnected chaotic oscillators is explored for brain waves (EEG) simulation. For the inverse problem solution a parallel real-coded genetic algorithm (PRCGA) is proposed. In order to conduct thorough comparison between the simulated and target signal characteristics, a spectrum analysis of the signals is undertaken. A good matching between the theoretical and experimental EEG signals has been achieved. Numerical results of calculations are presented and discussed.
First Principles Calculations of Electronic Excitations in 2D Materials
DEFF Research Database (Denmark)
Rasmussen, Filip Anselm
electronic transport, optical and chemical properties. On the other hand it has shown to be a great starting point for a systematic pertubation theory approach to obtain the so-called quasiparticle spectrum. In the GW approximation one considers the considers the potential from a charged excitation...... as if it is being screened by the electrons in the material. This method has been very successful for calculating quasiparticle energies of bulk materials but results have been more varying for 2D materials. The reason is that the 2D confined electrons are less able to screen the added charge and some...
Design and production of a short 2D animated film
Prusnik, Petra
2014-01-01
Design and production of a short 2D animated film The thesis aims at analysing animation, the process of creating an ani- mated film with its technical and compositional details as well as show the process of making a short 2D animated movie with Toon Boom Studio. It is composed of theoretical and practical part. The theoretical part of this thesis consists of the definition of the term "animation", a quick overview of its history and evolution, and an in-depth look into var...
2D director calculation for liquid crystal optical phased array
International Nuclear Information System (INIS)
Xu, L; Zhang, J; Wu, L Y
2005-01-01
A practical numerical model for a liquid crystal cell is set up based on the geometrical structure of liquid crystal optical phased arrays. Model parameters include width and space of electrodes, thickness of liquid crystal layer, alignment layers and glass substrates, pre-tilted angles, dielectric constants, elastic constants and so on. According to electrostatic field theory and Frank-Oseen elastic continuum theory, 2D electric potential distribution and 2D director distribution are calculated by means of the finite difference method on non-uniform grids. The influence of cell sizes on director distribution is analyzed. The fringe field effect between electrodes is also discussed
Spreading dynamics of 2D dipolar Langmuir monolayer phases.
Heinig, P; Wurlitzer, S; Fischer, Th M
2004-07-01
We study the spreading of a liquid 2D dipolar droplet in a Langmuir monolayer. Interfacial tensions (line tensions) and microscopic contact angles depend on the scale on which they are probed and obey a scaling law. Assuming rapid equilibration of the microscopic contact angle and ideal slippage of the 2D solid/liquid and solid/gas boundary, the driving force of spreading is merely expressed by the shape-dependent long-range interaction integrals. We obtain good agreement between experiment and numerical simulations using this theory.
Isotropic 2D quadrangle meshing with size and orientation control
Pellenard, Bertrand
2011-12-01
We propose an approach for automatically generating isotropic 2D quadrangle meshes from arbitrary domains with a fine control over sizing and orientation of the elements. At the heart of our algorithm is an optimization procedure that, from a coarse initial tiling of the 2D domain, enforces each of the desirable mesh quality criteria (size, shape, orientation, degree, regularity) one at a time, in an order designed not to undo previous enhancements. Our experiments demonstrate how well our resulting quadrangle meshes conform to a wide range of input sizing and orientation fields.
Design of the LRP airfoil series using 2D CFD
DEFF Research Database (Denmark)
Zahle, Frederik; Bak, Christian; Sørensen, Niels N.
2014-01-01
This paper describes the design and wind tunnel testing of a high-Reynolds number, high lift airfoil series designed for wind turbines. The airfoils were designed using direct gradient- based numerical multi-point optimization based on a Bezier parameterization of the shape, coupled to the 2D...... Navier-Stokes flow solver EllipSys2D. The resulting airfoils, the LRP2-30 and LRP2-36, achieve both higher operational lift coefficients and higher lift to drag ratios compared to the equivalent FFA-W3 airfoils....
Design of the LRP airfoil series using 2D CFD
International Nuclear Information System (INIS)
Zahle, Frederik; Bak, Christian; Sørensen, Niels N; Vronsky, Tomas; Gaudern, Nicholas
2014-01-01
This paper describes the design and wind tunnel testing of a high-Reynolds number, high lift airfoil series designed for wind turbines. The airfoils were designed using direct gradient- based numerical multi-point optimization based on a Bezier parameterization of the shape, coupled to the 2D Navier-Stokes flow solver EllipSys2D. The resulting airfoils, the LRP2-30 and LRP2-36, achieve both higher operational lift coefficients and higher lift to drag ratios compared to the equivalent FFA-W3 airfoils
Thermodynamics of an Attractive 2D Fermi Gas
Fenech, K.; Dyke, P.; Peppler, T.; Lingham, M. G.; Hoinka, S.; Hu, H.; Vale, C. J.
2016-01-01
Thermodynamic properties of matter are conveniently expressed as functional relations between variables known as equations of state. Here we experimentally determine the compressibility, density, and pressure equations of state for an attractive 2D Fermi gas in the normal phase as a function of temperature and interaction strength. In 2D, interacting gases exhibit qualitatively different features to those found in 3D. This is evident in the normalized density equation of state, which peaks at intermediate densities corresponding to the crossover from classical to quantum behavior.
How Mucosal Epithelia Deal with Stress: Role of NKG2D/NKG2D Ligands during Inflammation
Directory of Open Access Journals (Sweden)
Fabrizio Antonangeli
2017-11-01
Full Text Available Mucosal epithelia encounter both physicochemical and biological stress during their life and have evolved several mechanisms to deal with them, including regulation of immune cell functions. Stressed and damaged cells need to be cleared to control local inflammation and trigger tissue healing. Engagement of the activating NKG2D receptor is one of the most direct mechanisms involved in the recognition of stressed cells by the immune system. Indeed, injured cells promptly express NKG2D ligands that in turn mediate the activation of lymphocytes of both innate and adaptive arms of the immune system. This review focuses on different conditions that are able to modulate NKG2D ligand expression on the epithelia. Special attention is given to the mechanisms of immunosurveillance mediated by natural killer cells, which are finely tuned by NKG2D. Different types of stress, including viral and bacterial infections, chronic inflammation, and cigarette smoke exposure, are discussed as paradigmatic conditions for NKG2D ligand modulation, and the implications for tissue homeostasis are discussed.
spatial variation of magnetotelluric field components in simple 2d ...
African Journals Online (AJOL)
DEVEERERRY
resistivities which are useful in the interpretation of magnetotelluric field measurements for investigating geologic ... equation technique required about 20 minutes – CPU time ... Maxwell's equations govern large scale EM phenomena.
Directory of Open Access Journals (Sweden)
Jorge García de la Osa
2007-01-01
Full Text Available En el Centro internacional Tsukuba, Japón fueron realizados ensayos en condiciones de macetas con el propósito de evaluar el efecto que producen diferentes niveles y manejos de agua sobre la emergencia y crecimiento de Echinochloa crus-galli P. Beauv. var. crus-galli. Se determinó que el aumento de la lámina de agua ejerció dos efectos sobre E. crus-galli, el retraso en el crecimiento que se manifestó de forma significativa a partir de una lámina de 5 cm y el de disminución de la cantidad de plántulas que sobresale la lámina de agua observado a partir de 10 cm. y que tomó un valor máximo con 20 cm. El establecimiento de una profundidad de agua inicial de 5 cm y posterior aumento a 10 y 15 cm cuando las plántulas de E. crus-galli alcanzaron 1-2 hojas y 2,5 cm de longitud provocaron un efecto similar sobre la emergencia y crecimiento de esta maleza que sus respectivos testigos con láminas permanentes de 10 y 15 cm. durante todo el ensayo.
Directory of Open Access Journals (Sweden)
Lina Yang
2014-01-01
Full Text Available To reduce the computation complexity of wavelet transform, this paper presents a novel approach to be implemented. It consists of two key techniques: (1 fast number theoretic transform(FNTT In the FNTT, linear convolution is replaced by the circular one. It can speed up the computation of 2D discrete wavelet transform. (2 In two-dimensional overlap-save method directly calculating the FNTT to the whole input sequence may meet two difficulties; namely, a big modulo obstructs the effective implementation of the FNTT and a long input sequence slows the computation of the FNTT down. To fight with such deficiencies, a new technique which is referred to as 2D overlap-save method is developed. Experiments have been conducted. The fast number theoretic transform and 2D overlap-method have been used to implement the dyadic wavelet transform and applied to contour extraction in pattern recognition.
The toroidal Hausdorff dimension of 2d Euclidean quantum gravity
DEFF Research Database (Denmark)
Ambjorn, Jan; Budd, Timothy George
2013-01-01
The lengths of shortest non-contractible loops are studied numerically in 2d Euclidean quantum gravity on a torus coupled to conformal field theories with central charge less than one. We find that the distribution of these geodesic lengths displays a scaling in agreement with a Hausdorff dimension...
2-D fluid transport simulations of gaseous/radiative divertors
International Nuclear Information System (INIS)
Rognlien, T.D.; Brown, P.N.; Campbell, R.B.; Kaiser, T.B.; Knoll, D.A.; McHugh, P.R.; Porter, G.D.; Rensink, M.E.; Smith, G.R.
1994-01-01
The features of the fully implicit 2-D fluid code UEDGE are described. The utility of the code is demonstrated by showing bifurcations or multiple solutions of the tokamak edge plasma for both deuterium and impurity injection in the divertor. (orig.)
2D Materials with Nanoconfined Fluids for Electrochemical Energy Storage
Energy Technology Data Exchange (ETDEWEB)
Augustyn, Veronica [North Carolina State Univ., Raleigh, NC (United States). Dept. of Materials Science and Engineering; Gogotsi, Yury [Drexel Univ., Philadelphia, PA (United States). Dept. of Materials Science and Engineering, A. J. Drexel Nanomaterials Inst.
2017-10-11
In the quest to develop energy storage with both high power and high energy densities, and while maintaining high volumetric capacity, recent results show that a variety of 2D and layered materials exhibit rapid kinetics of ion transport by the incorporation of nanoconfined fluids.
Interactive exploratory visualization of 2D vector fields
Isenberg, Tobias; Everts, Maarten H.; Grubert, Jens; Carpendale, Sheelagh
In this paper we present several techniques to interactively explore representations of 2D vector fields. Through a set of simple hand postures used on large, touch-sensitive displays, our approach allows individuals to custom design glyphs (arrows, lines, etc.) that best reveal patterns of the
2D Vertical Heterostructures for Novel Tunneling Device Applications
2017-03-01
2D Vertical Heterostructures for Novel Tunneling Device Applications Philip M. Campbell, Christopher J. Perini, W. Jud Ready, and Eric M. Vogel...School of Materials Science and Engineering Georgia Institute of Technology Atlanta, GA, USA 30332 Abstract: Vertical heterostructures...digital logic, signal processing, analog-to-digital conversion, and high-frequency communications, vertical heterostructure tunneling devices have
2-D Imaging of Electron Temperature in Tokamak Plasmas
International Nuclear Information System (INIS)
Munsat, T.; Mazzucato, E.; Park, H.; Domier, C.W.; Johnson, M.; Luhmann, N.C. Jr.; Wang, J.; Xia, Z.; Classen, I.G.J.; Donne, A.J.H.; Pol, M.J. van de
2004-01-01
By taking advantage of recent developments in millimeter wave imaging technology, an Electron Cyclotron Emission Imaging (ECEI) instrument, capable of simultaneously measuring 128 channels of localized electron temperature over a 2-D map in the poloidal plane, has been developed for the TEXTOR tokamak. Data from the new instrument, detailing the MHD activity associated with a sawtooth crash, is presented
2-D tiles declustering method based on virtual devices
Li, Zhongmin; Gao, Lu
2009-10-01
Generally, 2-D spatial data are divided as a series of tiles according to the plane grid. To satisfy the effect of vision, the tiles in the query window including the view point would be displayed quickly at the screen. Aiming at the performance difference of real storage devices, we propose a 2-D tiles declustering method based on virtual device. Firstly, we construct a group of virtual devices which have same storage performance and non-limited capacity, then distribute the tiles into M virtual devices according to the query window of 2-D tiles. Secondly, we equably map the tiles in M virtual devices into M equidistant intervals in [0, 1) using pseudo-random number generator. Finally, we devide [0, 1) into M intervals according to the tiles distribution percentage of every real storage device, and distribute the tiles in each interval in the corresponding real storage device. We have designed and realized a prototype GlobeSIGht, and give some related test results. The results show that the average response time of each tile in the query window including the view point using 2-D tiles declustering method based on virtual device is more efficient than using other methods.
2D nanomaterials based electrochemical biosensors for cancer diagnosis.
Wang, Lu; Xiong, Qirong; Xiao, Fei; Duan, Hongwei
2017-03-15
Cancer is a leading cause of death in the world. Increasing evidence has demonstrated that early diagnosis holds the key towards effective treatment outcome. Cancer biomarkers are extensively used in oncology for cancer diagnosis and prognosis. Electrochemical sensors play key roles in current laboratory and clinical analysis of diverse chemical and biological targets. Recent development of functional nanomaterials offers new possibilities of improving the performance of electrochemical sensors. In particular, 2D nanomaterials have stimulated intense research due to their unique array of structural and chemical properties. The 2D materials of interest cover broadly across graphene, graphene derivatives (i.e., graphene oxide and reduced graphene oxide), and graphene-like nanomaterials (i.e., 2D layered transition metal dichalcogenides, graphite carbon nitride and boron nitride nanomaterials). In this review, we summarize recent advances in the synthesis of 2D nanomaterials and their applications in electrochemical biosensing of cancer biomarkers (nucleic acids, proteins and some small molecules), and present a personal perspective on the future direction of this area. Copyright © 2016 Elsevier B.V. All rights reserved.
Discrepant Results in a 2-D Marble Collision
Kalajian, Peter
2013-01-01
Video analysis of 2-D collisions is an excellent way to investigate conservation of linear momentum. The often-desired experimental design goal is to minimize the momentum loss in order to demonstrate the conservation law. An air table with colliding pucks is an ideal medium for this experiment, but such equipment is beyond the budget of many…
Validation and testing of the VAM2D computer code
International Nuclear Information System (INIS)
Kool, J.B.; Wu, Y.S.
1991-10-01
This document describes two modeling studies conducted by HydroGeoLogic, Inc. for the US NRC under contract no. NRC-04089-090, entitled, ''Validation and Testing of the VAM2D Computer Code.'' VAM2D is a two-dimensional, variably saturated flow and transport code, with applications for performance assessment of nuclear waste disposal. The computer code itself is documented in a separate NUREG document (NUREG/CR-5352, 1989). The studies presented in this report involve application of the VAM2D code to two diverse subsurface modeling problems. The first one involves modeling of infiltration and redistribution of water and solutes in an initially dry, heterogeneous field soil. This application involves detailed modeling over a relatively short, 9-month time period. The second problem pertains to the application of VAM2D to the modeling of a waste disposal facility in a fractured clay, over much larger space and time scales and with particular emphasis on the applicability and reliability of using equivalent porous medium approach for simulating flow and transport in fractured geologic media. Reflecting the separate and distinct nature of the two problems studied, this report is organized in two separate parts. 61 refs., 31 figs., 9 tabs
ENVIRONMENTAL EFFECTS OF DREDGING AND DISPOSAL (E2-D2)
US Army Corps of Engineers public web site for the "Environmental Effects of Dredging and Disposal" ("E2-D2") searchable database of published reports and studies about environmental impacts associated with dredging and disposal operations. Many of the reports and studies are ava...
Band Alignment of 2D Transition Metal Dichalcogenide Heterojunctions
Chiu, Ming-Hui
2016-09-20
It is critically important to characterize the band alignment in semiconductor heterojunctions (HJs) because it controls the electronic and optical properties. However, the well-known Anderson\\'s model usually fails to predict the band alignment in bulk HJ systems due to the presence of charge transfer at the interfacial bonding. Atomically thin 2D transition metal dichalcogenide materials have attracted much attention recently since the ultrathin HJs and devices can be easily built and they are promising for future electronics. The vertical HJs based on 2D materials can be constructed via van der Waals stacking regardless of the lattice mismatch between two materials. Despite the defect-free characteristics of the junction interface, experimental evidence is still lacking on whether the simple Anderson rule can predict the band alignment of HJs. Here, the validity of Anderson\\'s model is verified for the 2D heterojunction systems and the success of Anderson\\'s model is attributed to the absence of dangling bonds (i.e., interface dipoles) at the van der Waal interface. The results from the work set a foundation allowing the use of powerful Anderson\\'s rule to determine the band alignments of 2D HJs, which is beneficial to future electronic, photonic, and optoelectronic devices. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Reorientation of magnetization with temperature in 2D ferromagnets
International Nuclear Information System (INIS)
Fridman, Yu. A.; Spirin, D.V.; Klevets, Ph. N.
2002-01-01
We investigated 2D Heisenberg ferromagnet (monolayer) with the account of dipolar forces and uniaxial anisotropy and found a reorientation phase transition in temperature from out-of-plane to in-plane phase. This phase transition is of the first order with hysteresis. We estimated the temperatures of switching both analytically and numerically
CFD code comparison for 2D airfoil flows
DEFF Research Database (Denmark)
Sørensen, Niels N.; Méndez, B.; Muñoz, A.
2016-01-01
The current paper presents the effort, in the EU AVATAR project, to establish the necessary requirements to obtain consistent lift over drag ratios among seven CFD codes. The flow around a 2D airfoil case is studied, for both transitional and fully turbulent conditions at Reynolds numbers of 3...
Spontaneous bending of 2D molecular bottle-brush
Subbotin, A; Jong, J; ten Brinke, G
Using a scaling approach we consider a 2D comb copolymer brush under bending deformations. We show that the rectilinear brush is locally stable and can be characterized by a persistence length lambda increasing with the molecular weight of grafting side chains as lambda similar to M-3. A bending
Lattice simulation of 2d Gross-Neveu-type models
International Nuclear Information System (INIS)
Limmer, M.; Gattringer, C.; Hermann, V.
2006-01-01
Full text: We discuss a Monte Carlo simulation of 2d Gross-Neveu-type models on the lattice. The four-Fermi interaction is written as a Gaussian integral with an auxiliary field and the fermion determinant is included by reweighting. We present results for bulk quantities and correlators and compare them to a simulation using a fermion-loop representation. (author)
Rheological Properties of Quasi-2D Fluids in Microgravity
Stannarius, Ralf; Trittel, Torsten; Eremin, Alexey; Harth, Kirsten; Clark, Noel; Maclennan, Joseph; Glaser, Matthew; Park, Cheol; Hall, Nancy; Tin, Padetha
2015-01-01
In recent years, research on complex fluids and fluids in restricted geometries has attracted much attention in the scientific community. This can be attributed not only to the development of novel materials based on complex fluids but also to a variety of important physical phenomena which have barely been explored. One example is the behavior of membranes and thin fluid films, which can be described by two-dimensional (2D) rheology behavior that is quite different from 3D fluids. In this study, we have investigated the rheological properties of freely suspended films of a thermotropic liquid crystal in microgravity experiments. This model system mimics isotropic and anisotropic quasi 2D fluids [46]. We use inkjet printing technology to dispense small droplets (inclusions) onto the film surface. The motion of these inclusions provides information on the rheological properties of the films and allows the study of a variety of flow instabilities. Flat films have been investigated on a sub-orbital rocket flight and curved films (bubbles) have been studied in the ISS project OASIS. Microgravity is essential when the films are curved in order to avoid sedimentation. The experiments yield the mobility of the droplets in the films as well as the mutual mobility of pairs of particles. Experimental results will be presented for 2D-isotropic (smectic-A) and 2D-nematic (smectic-C) phases.
Validation of minor species of the MIPAS2D database
Directory of Open Access Journals (Sweden)
Enzo Papandrea
2014-01-01
Full Text Available The MIPAS2D [Dinelli et al., 2010] database has been developed applying the tomographic analysis technique GMTR [Carlotti et al., 2001] to measurements acquired in the nominal observation mode of the complete MIPAS (Michelson Interferometer for Passive Atmosphere Sounding [Fischer et al., 2008] mission. […
2D MR angiography of the aortic aneurysm
International Nuclear Information System (INIS)
Amanuma, Makoto; Hasegawa, Makoto; Watabe, Tsuneya; Heshiki, Atsuko
1992-01-01
2D time-of-flight MR angiography was performed in 6 cases of thoracic aortic aneurysm. Oblique saturation pulses were used to suppress the signals of the pulmonary artery and SVC, providing excellent selective MR aortograms. Three dimensional extension of the aneurysm and its relation with cervical branches were easily assessed. It could be possible to replace invasive aortography by this technique. (author)
2D Toda chain and associated commutator identity
Pogrebkov, A. K.
2007-01-01
Developing observation made in \\cite{commut} we show that simple identity of the commutator type on an associative algebra is in one-to-one correspondence to 2D (infinite) Toda chain. We introduce representation of elements of associative algebra that, under some generic conditions, enables derivation of the Toda chain equation and its Lax pair from the given commutator identity.
ELLIPT2D: A Flexible Finite Element Code Written Python
International Nuclear Information System (INIS)
Pletzer, A.; Mollis, J.C.
2001-01-01
The use of the Python scripting language for scientific applications and in particular to solve partial differential equations is explored. It is shown that Python's rich data structure and object-oriented features can be exploited to write programs that are not only significantly more concise than their counter parts written in Fortran, C or C++, but are also numerically efficient. To illustrate this, a two-dimensional finite element code (ELLIPT2D) has been written. ELLIPT2D provides a flexible and easy-to-use framework for solving a large class of second-order elliptic problems. The program allows for structured or unstructured meshes. All functions defining the elliptic operator are user supplied and so are the boundary conditions, which can be of Dirichlet, Neumann or Robbins type. ELLIPT2D makes extensive use of dictionaries (hash tables) as a way to represent sparse matrices.Other key features of the Python language that have been widely used include: operator over loading, error handling, array slicing, and the Tkinter module for building graphical use interfaces. As an example of the utility of ELLIPT2D, a nonlinear solution of the Grad-Shafranov equation is computed using a Newton iterative scheme. A second application focuses on a solution of the toroidal Laplace equation coupled to a magnetohydrodynamic stability code, a problem arising in the context of magnetic fusion research
Rowley-Neale, Samuel J.; Fearn, Jamie M.; Brownson, Dale A. C.; Smith, Graham C.; Ji, Xiaobo; Banks, Craig E.
2016-08-01
Two-dimensional molybdenum disulphide nanosheets (2D-MoS2) have proven to be an effective electrocatalyst, with particular attention being focused on their use towards increasing the efficiency of the reactions associated with hydrogen fuel cells. Whilst the majority of research has focused on the Hydrogen Evolution Reaction (HER), herein we explore the use of 2D-MoS2 as a potential electrocatalyst for the much less researched Oxygen Reduction Reaction (ORR). We stray from literature conventions and perform experiments in 0.1 M H2SO4 acidic electrolyte for the first time, evaluating the electrochemical performance of the ORR with 2D-MoS2 electrically wired/immobilised upon several carbon based electrodes (namely; Boron Doped Diamond (BDD), Edge Plane Pyrolytic Graphite (EPPG), Glassy Carbon (GC) and Screen-Printed Electrodes (SPE)) whilst exploring a range of 2D-MoS2 coverages/masses. Consequently, the findings of this study are highly applicable to real world fuel cell applications. We show that significant improvements in ORR activity can be achieved through the careful selection of the underlying/supporting carbon materials that electrically wire the 2D-MoS2 and utilisation of an optimal mass of 2D-MoS2. The ORR onset is observed to be reduced to ca. +0.10 V for EPPG, GC and SPEs at 2D-MoS2 (1524 ng cm-2 modification), which is far closer to Pt at +0.46 V compared to bare/unmodified EPPG, GC and SPE counterparts. This report is the first to demonstrate such beneficial electrochemical responses in acidic conditions using a 2D-MoS2 based electrocatalyst material on a carbon-based substrate (SPEs in this case). Investigation of the beneficial reaction mechanism reveals the ORR to occur via a 4 electron process in specific conditions; elsewhere a 2 electron process is observed. This work offers valuable insights for those wishing to design, fabricate and/or electrochemically test 2D-nanosheet materials towards the ORR.Two-dimensional molybdenum disulphide nanosheets
Cytochrome P-450 2D6 (CYP2D6) Genotype and Breast Cancer Recurrence in Tamoxifen-Treated Patients
DEFF Research Database (Denmark)
Ahern, Thomas P; Hertz, Daniel L; Damkier, Per
2017-01-01
-infiltrated tissues, all of which showed excellent CYP2D6 genotype agreement. We applied these concordance data to a quantitative bias analysis of the subset of the 31 studies that were based on genotypes from tumor-infiltrated tissue to examine whether genotyping errors substantially biased estimates of association...... genotyped DNA from tumor-infiltrated tissues, and their results may have been susceptible to germline genotype misclassification from loss of heterozygosity at the CYP2D6 locus. We systematically reviewed 6 studies of concordance between genotypes obtained from paired nonneoplastic and breast tumor...
Flood hazard assessment using 1D and 2D approaches
Petaccia, Gabriella; Costabile, Pierfranco; Macchione, Francesco; Natale, Luigi
2013-04-01
The EU flood risk Directive (Directive 2007/60/EC) prescribes risk assessment and mapping to develop flood risk management plans. Flood hazard mapping may be carried out with mathematical models able to determine flood-prone areas once realistic conditions (in terms of discharge or water levels) are imposed at the boundaries of the case study. The deterministic models are mainly based on shallow water equations expressed in their 1D or 2D formulation. The 1D approach is widely used, especially in technical studies, due to its relative simplicity, its computational efficiency and also because it requires topographical data not as expensive as the ones needed by 2D models. Even if in a great number of practical situations, such as modeling in-channel flows and not too wide floodplains, the 1D approach may provide results close to the prediction of a more sophisticated 2D model, it must be pointed out that the correct use of a 1D model in practical situations is more complex than it may seem. The main issues to be correctly modeled in a 1D approach are the definition of hydraulic structures such as bridges and buildings interacting with the flow and the treatment of the tributaries. Clearly all these aspects have to be taken into account also in the 2D modeling, but with fewer difficulties. The purpose of this paper is to show how the above cited issues can be described using a 1D or 2D unsteady flow modeling. In particular the Authors will show the devices that have to be implemented in 1D modeling to get reliable predictions of water levels and discharges comparable to the ones obtained using a 2D model. Attention will be focused on an actual river (Crati river) located in the South of Italy. This case study is quite complicated since it deals with the simulation of channeled flows, overbank flows, interactions with buildings, bridges and tributaries. Accurate techniques, intentionally developed by the Authors to take into account all these peculiarities in 1D and 2
2d-LCA - an alternative to x-wires
Puczylowski, Jaroslaw; Hölling, Michael; Peinke, Joachim
2014-11-01
The 2d-Laser Cantilever Anemometer (2d-LCA) is an innovative sensor for two-dimensional velocity measurements in fluids. It uses a micostructured cantilever made of silicon and SU-8 as a sensing element and is capable of performing mesurements with extremly high temporal resolutions up to 150 kHz. The size of the cantilever defines its spatial resolution, which is in the order of 150 μm only. Another big feature is a large angular range of 180° in total. The 2d-LCA has been developed as an alternative measurement method to x-wires with the motivation to create a sensor that can operate in areas where the use of hot-wire anemometry is difficult. These areas include measurements in liquids and in near-wall or particle-laden flows. Unlike hot-wires, the resolution power of the 2d-LCA does not decrease with increasing flow velocity, making it particularly suitable for measurements in high speed flows. Comparative measurements with the 2d-LCA and hot-wires have been carried out in order to assess the performance of the new anemometer. The data of both measurement techniques were analyzed using the same stochastic methods including a spectral analysis as well as an inspection of increment statistics and structure functions. Furthermore, key parameters, such as mean values of both velocity components, angles of attack and the characteristic length scales were determined from both data sets. The analysis reveals a great agreement between both anemometers and thus confirms the new approach.
Half-metallicity in 2D organometallic honeycomb frameworks
Sun, Hao; Li, Bin; Zhao, Jin
2016-10-01
Half-metallic materials with a high Curie temperature (T C) have many potential applications in spintronics. Magnetic metal free two-dimensional (2D) half-metallic materials with a honeycomb structure contain graphene-like Dirac bands with π orbitals and show excellent aspects in transport properties. In this article, by investigating a series of 2D organometallic frameworks with a honeycomb structure using first principles calculations, we study the origin of forming half-metallicity in this kind of 2D organometallic framework. Our analysis shows that charge transfer and covalent bonding are two crucial factors in the formation of half-metallicity in organometallic frameworks. (i) Sufficient charge transfer from metal atoms to the molecules is essential to form the magnetic centers. (ii) These magnetic centers need to be connected through covalent bonding, which guarantee the strong ferromagnetic (FM) coupling. As examples, the organometallic frameworks composed by (1,3,5)-benzenetricarbonitrile (TCB) molecules with noble metals (Au, Ag, Cu) show half-metallic properties with T C as high as 325 K. In these organometallic frameworks, the strong electronegative cyano-groups (CN groups) drive the charge transfer from metal atoms to the TCB molecules, forming the local magnetic centers. These magnetic centers experience strong FM coupling through the d-p covalent bonding. We propose that most of the 2D organometallic frameworks composed by molecule—CN—noble metal honeycomb structures contain similar half metallicity. This is verified by replacing TCB molecules with other organic molecules. Although the TCB-noble metal organometallic framework has not yet been synthesized, we believe the development of synthesizing techniques and facility will enable the realization of them. Our study provides new insight into the 2D half-metallic material design for the potential applications in nanotechnology.
Half-metallicity in 2D organometallic honeycomb frameworks
International Nuclear Information System (INIS)
Sun, Hao; Li, Bin; Zhao, Jin
2016-01-01
Half-metallic materials with a high Curie temperature (T C ) have many potential applications in spintronics. Magnetic metal free two-dimensional (2D) half-metallic materials with a honeycomb structure contain graphene-like Dirac bands with π orbitals and show excellent aspects in transport properties. In this article, by investigating a series of 2D organometallic frameworks with a honeycomb structure using first principles calculations, we study the origin of forming half-metallicity in this kind of 2D organometallic framework. Our analysis shows that charge transfer and covalent bonding are two crucial factors in the formation of half-metallicity in organometallic frameworks. (i) Sufficient charge transfer from metal atoms to the molecules is essential to form the magnetic centers. (ii) These magnetic centers need to be connected through covalent bonding, which guarantee the strong ferromagnetic (FM) coupling. As examples, the organometallic frameworks composed by (1,3,5)-benzenetricarbonitrile (TCB) molecules with noble metals (Au, Ag, Cu) show half-metallic properties with T C as high as 325 K. In these organometallic frameworks, the strong electronegative cyano-groups (CN groups) drive the charge transfer from metal atoms to the TCB molecules, forming the local magnetic centers. These magnetic centers experience strong FM coupling through the d – p covalent bonding. We propose that most of the 2D organometallic frameworks composed by molecule—CN—noble metal honeycomb structures contain similar half metallicity. This is verified by replacing TCB molecules with other organic molecules. Although the TCB-noble metal organometallic framework has not yet been synthesized, we believe the development of synthesizing techniques and facility will enable the realization of them. Our study provides new insight into the 2D half-metallic material design for the potential applications in nanotechnology. (paper)
International Nuclear Information System (INIS)
Giaddui, T; Yu, J; Xiao, Y; Jacobs, P; Manfredi, D; Linnemann, N
2015-01-01
Purpose: 2D-2D kV image guided radiation therapy (IGRT) credentialing evaluation for clinical trial qualification was historically qualitative through submitting screen captures of the fusion process. However, as quantitative DICOM 2D-2D and 2D-3D image registration tools are implemented in clinical practice for better precision, especially in centers that treat patients with protons, better IGRT credentialing techniques are needed. The aim of this work is to establish methodologies for quantitatively reviewing IGRT submissions based on DICOM 2D-2D and 2D-3D image registration and to test the methodologies in reviewing 2D-2D and 2D-3D IGRT submissions for RTOG/NRG Oncology clinical trials qualifications. Methods: DICOM 2D-2D and 2D-3D automated and manual image registration have been tested using the Harmony tool in MIM software. 2D kV orthogonal portal images are fused with the reference digital reconstructed radiographs (DRR) in the 2D-2D registration while the 2D portal images are fused with DICOM planning CT image in the 2D-3D registration. The Harmony tool allows alignment of the two images used in the registration process and also calculates the required shifts. Shifts calculated using MIM are compared with those submitted by institutions for IGRT credentialing. Reported shifts are considered to be acceptable if differences are less than 3mm. Results: Several tests have been performed on the 2D-2D and 2D-3D registration. The results indicated good agreement between submitted and calculated shifts. A workflow for reviewing these IGRT submissions has been developed and will eventually be used to review IGRT submissions. Conclusion: The IROC Philadelphia RTQA center has developed and tested a new workflow for reviewing DICOM 2D-2D and 2D-3D IGRT credentialing submissions made by different cancer clinical centers, especially proton centers. NRG Center for Innovation in Radiation Oncology (CIRO) and IROC RTQA center continue their collaborative efforts to enhance
Energy Technology Data Exchange (ETDEWEB)
Giaddui, T; Yu, J; Xiao, Y [Thomas Jefferson University, Philadelphia, PA (United States); Jacobs, P [MIM Software, Inc, Cleavland, Ohio (United States); Manfredi, D; Linnemann, N [IROC Philadelphia, RTQA Center, Philadelphia, PA (United States)
2015-06-15
Purpose: 2D-2D kV image guided radiation therapy (IGRT) credentialing evaluation for clinical trial qualification was historically qualitative through submitting screen captures of the fusion process. However, as quantitative DICOM 2D-2D and 2D-3D image registration tools are implemented in clinical practice for better precision, especially in centers that treat patients with protons, better IGRT credentialing techniques are needed. The aim of this work is to establish methodologies for quantitatively reviewing IGRT submissions based on DICOM 2D-2D and 2D-3D image registration and to test the methodologies in reviewing 2D-2D and 2D-3D IGRT submissions for RTOG/NRG Oncology clinical trials qualifications. Methods: DICOM 2D-2D and 2D-3D automated and manual image registration have been tested using the Harmony tool in MIM software. 2D kV orthogonal portal images are fused with the reference digital reconstructed radiographs (DRR) in the 2D-2D registration while the 2D portal images are fused with DICOM planning CT image in the 2D-3D registration. The Harmony tool allows alignment of the two images used in the registration process and also calculates the required shifts. Shifts calculated using MIM are compared with those submitted by institutions for IGRT credentialing. Reported shifts are considered to be acceptable if differences are less than 3mm. Results: Several tests have been performed on the 2D-2D and 2D-3D registration. The results indicated good agreement between submitted and calculated shifts. A workflow for reviewing these IGRT submissions has been developed and will eventually be used to review IGRT submissions. Conclusion: The IROC Philadelphia RTQA center has developed and tested a new workflow for reviewing DICOM 2D-2D and 2D-3D IGRT credentialing submissions made by different cancer clinical centers, especially proton centers. NRG Center for Innovation in Radiation Oncology (CIRO) and IROC RTQA center continue their collaborative efforts to enhance
Farber, Nuri B; Nemmers, Brian; Noguchi, Kevin K
2006-09-15
Antagonists of the N-methyl-D-aspartate (NMDA) glutamate receptor, most likely by producing disinhibtion in complex circuits, acutely produce psychosis and cognitive disturbances in humans, and neurotoxicity in rodents. Studies examining NMDA Receptor Hypofunction (NRHypo) neurotoxicity in animals, therefore, may provide insights into the pathophysiology of psychotic disorders. Dopaminergic D2 and/or D3 agents can modify psychosis over days to weeks, suggesting involvement of these transmitter system(s). We studied the ability of D2/D3 agonists and antagonists to modify NRHypo neurotoxicity both after a one-time acute exposure and after chronic daily exposure. Here we report that D2/D3 dopamine agonists, probably via D3 receptors, prevent NRHypo neurotoxicity when given acutely. The protective effect with D2/D3 agonists is not seen after chronic daily dosing. In contrast, the antipsychotic haloperidol does not affect NRHypo neurotoxicity when given acutely at D2/D3 doses. However, after chronic daily dosing of 1, 3, or 5 weeks, haloperidol does prevent NRHypo neurotoxicity with longer durations producing greater protection. Understanding the changes that occur in the NRHypo circuit after chronic exposure to dopaminergic agents could provide important clues into the pathophysiology of psychotic disorders.
Titan 2D: Understanding Titan’s Seasonal Atmospheric Cycles
Wong, Michael; Zhang, X.; Li, C.; Hu, R.; Shia, R.; Newman, C.; Müller-Wodarg, I.; Yung, Y.
2013-10-01
In this study, we present results from a novel two-dimensional (2D) model that simulates the physics and chemistry of Titan’s atmosphere. Despite being an icy moon of Saturn, Titan is the only Solar System object aside from Earth that is sheathed by a thick nitrogen-dominated atmosphere. This vulnerable gaseous envelope—an embodiment of a delicate coupling between photochemistry, radiation, and dynamics—is Nature’s laboratory for the synthesis of complex organic molecules. Titan’s large obliquity generates pronounced seasonal cycles in its atmosphere, and the Cassini spacecraft has been observing these variations since 2004. In particular, Cassini measurements show that the latitudinal distribution of Titan’s rich mélange of hydrocarbon species follows seasonal patterns. The mixing ratios of hydrocarbons increase with latitude towards the winter pole, suggesting a pole-to-pole circulation that reverses after equinox. Using a one-dimensional photochemical model of Titan’s atmosphere, we show that photochemistry alone cannot produce the observed meridional hydrocarbon distribution. This necessitates the employment of a 2D chemistry-transport model that includes meridional circulation as well as diffusive processes and photochemistry. Of additional concern, no previous 2D model of Titan extends beyond 500 km altitude—a critical limitation since the peak of methane photolysis is at 800 km. Our 2D model is the first to include Titan’s stratosphere, mesosphere, and thermosphere. The meridional circulation in our 2D model is derived from the outputs of two general circulation models (GCMs): the TitanWRF GCM (Newman et al. 2011) covering the troposphere, stratosphere, and lower mesosphere, and a thermosphere general circulation model (TGCM) covering the remainder of the atmosphere through the thermosphere (Müller-Wodarg et al. 2003; 2008). This presentation will focus on the utilization of these advances applied to the 2D Caltech/JPL KINETICS model to
2-D linear motion system. Innovative technology summary report
International Nuclear Information System (INIS)
1998-11-01
The US Department of Energy's (DOE's) nuclear facility decontamination and decommissioning (D and D) program requires buildings to be decontaminated, decommissioned, and surveyed for radiological contamination in an expeditious and cost-effective manner. Simultaneously, the health and safety of personnel involved in the D and D activities is of primary concern. D and D workers must perform duties high off the ground, requiring the use of manlifts or scaffolding, often, in radiologically or chemically contaminated areas or in areas with limited access. Survey and decontamination instruments that are used are sometimes heavy or awkward to use, particularly when the worker is operating from a manlift or scaffolding. Finding alternative methods of performing such work on manlifts or scaffolding is important. The 2-D Linear Motion System (2-D LMS), also known as the Wall Walker trademark, is designed to remotely position tools and instruments on walls for use in such activities as radiation surveys, decontamination, and painting. Traditional (baseline) methods for operating equipment for these tasks require workers to perform duties on elevated platforms, sometimes several meters above the ground surface and near potential sources of contamination. The Wall Walker 2-D LMS significantly improves health and safety conditions by facilitating remote operation of equipment. The Wall Walker 2-D LMS performed well in a demonstration of its precision, accuracy, maneuverability, payload capacity, and ease of use. Thus, this innovative technology is demonstrated to be a viable alternative to standard methods of performing work on large, high walls, especially those that have potential contamination concerns. The Wall Walker was used to perform a final release radiological survey on over 167 m 2 of walls. In this application, surveying using a traditional (baseline) method that employs an aerial lift for manual access was 64% of the total cost of the improved technology. However
Directory of Open Access Journals (Sweden)
Flávio F. Blanco
2003-08-01
Full Text Available The evapotranspiration (ETc and crop coefficient (Kc of cucumber in a greenhouse were determined during the winter-spring season in Piracicaba, SP, Brazil. Crop was irrigated with water of three different levels of salinity: S1 = 1.5, S2 = 3.1 and S3 = 5.2 dS m-1. Electrical conductivity of S1 was obtained only by addition of fertilizers, as fertigation was used, and the S2 and S3 levels in addition to fertilizers received magnesium sulphate, calcium chloride and sodium chloride. Cucumber seedlings, cv. Hokushin, were grafted on squash, transplanted on beds in double rows and directed vertically with a single stem. Irrigation was performed when soil matric potential reached -30 kPa, which was determined by the mean matric potential at 0.15 and 0.30 m depths, and the depth of irrigation was calculated from a reduced-evaporation pan. A randomized block design was adopted with three replications. The ETc and Kc were found to reduce linearly by the salinity of the irrigation water with reduction in ETc of 4.6% for unit increase of salinity. Due to the reduced evapotranspiration in saline treatments, deep percolation was increased by saline water and corresponded to 4, 7 and 17% of the total applied water in S1, S2 and S3, respectively. Measured Kc values for S1 were very close to the estimated values thus the combined use of tensiometers and evaporation pan was found to be adequate for irrigation management in greenhouse.Determinaram-se a evapotranspiração (ETc e o coeficiente de cultivo (Kc do pepino em ambiente protegido durante o período de inverno-primavera em Piracicaba, SP, Brasil. A cultura foi irrigada com água de três diferentes níveis de salinidade: S1 = 1,5, S2 = 3,1 e S3 = 5,2 dS m-1. A condutividade elétrica de S1 foi obtida apenas pelos fertilizantes, uma vez que se utilizou a fertirrigação, e os níveis S2 e S3 além de fertilizantes receberam sulfato de magnésio, cloreto de cálcio e cloreto de sódio. Mudas de pepino, cv
Directory of Open Access Journals (Sweden)
Mónica Núñez Flores
2010-10-01
Full Text Available Las esponjas son uno de los grupos de animales sésiles más abundantes y diversos de los fondos marinos tropicales, siendo un componente importante en los arrecifes coralinos, aunque poco estudiado a nivel de especies. El objetivo de este estudio fue caracterizar la comunidad de esponjas en el gradiente de profundidad de un arrecife coralino en Isla Larga, Parque Nacional San Esteban, Venezuela. Se trabajaron siete profundidades (1, 3, 6, 9, 12, 15 y 18m donde se midió la sedimentación neta y bruta, el índice de rugosidad, y se evaluó la riqueza, densidad y cobertura de las esponjas. Se identificaron 17 especies en 10 familias. La mayor densidad y cobertura se encontró a los 6m (6.03ind/m2, 11%, coincidiendo con la mínima sedimentación neta y la máxima rugosidad del sustrato. Las especies más abundantes fueron Desmapsamma anchorata, Amphimedon erina y Scopalina rueztleri. El análisis de componentes principales arrojó una separación de esta comunidad en 3 zonas, la somera (1 y 3m, donde las esponjas están sometidas a una tensión producida por el oleaje y alta iluminación, y las zonas media (6, 9 y 12m y profunda (15 y 18m, con características más favorables, dada una menor iluminación y sedimentación.Sponges (Porifera distribution along a depth gradient in a coral reef, Parque Nacional San Esteban, Carabobo, Venezuela. Sponges constitute one of the most diverse and abundant animal groups in the marine tropical benthos especially in coral reefs, though poorly studied to species level. The aim of this study is to characterize the sponge community along a depth gradient at Isla Larga (Parque Nacional San Esteban, Venezuela fringe reef. Net and total sedimentation, roughness index, sponge species richness, density and proportion of the bottom covered by sponges, were evaluated at seven depths (1, 3, 6, 9, 12, 15, 18m, 17 species were identified grouped in 10 demosponges families. The highest densities and coverage corresponded to
Directory of Open Access Journals (Sweden)
Thiago Claudino Gréggio
2008-06-01
Full Text Available The decomposition of soil litter contributes to maintaining agricultural sustainability, since the nutrients released by microbial activity are determinants of the net productivity of the agroecosystem. The decomposition of rubber tree (Hevea brasiliensis [Willd. ex A. Juss.] Müll. Arg. leaves located on the surface and buried in at 10 cm depth in Forest and Savannah (Cerradão soils (Oxisols was studied, with emphasis on the production of CO2 and the monthly variation of the remaining amounts of litter mass, soluble substances, cellulose and lignin. To evaluate CO2 production, H. brasiliensis leaves were incubated for 30 days in soils from the 0-2 cm and 10-12 cm layers. CO2 production increased in the 0-2 cm layer in comparison to the 10-12 cm layer. Litter mass and soluble substance loss was of 62 and 72% at the end of nine months of incubation, and of 38 and 65%, respectively, in the first three months, being greater in the deeper (71-74% than in surface layer (48-55%. Forest soil stimulated more litter mass loss and cellulose decomposition (only in the surface layer than Savannah soil. The cellulose (25% content decreased and lignin (30% increased in the initial months of incubation, however, at the end of the period of this study the same content (29% was found.La descomposición del mantillo del suelo contribuye a mantener la sostenibilidad agrícola, puesto que los nutrientes liberados por la actividad microbiana son determinantes para la productividad del ecosistema. La descomposición de hojas del árbol del caucho (Hevea brasiliensis [Willd. ex A. Juss.] Müll. Arg. colocadas en la superficie y enterradas en la profundidad de 10 cm en los suelos de Bosque y Cerradão (Oxisols se estudió con énfasis en la producción de CO2 y la variación mensual de las cantidades remanentes de masa foliar (MF, substancias solubles (SS, celulosa y lignina. Para evaluar la producción de CO2, se incubaron hojas del H. brasiliensis por 30 días en
MPEG-4-based 2D facial animation for mobile devices
Riegel, Thomas B.
2005-03-01
The enormous spread of mobile computing devices (e.g. PDA, cellular phone, palmtop, etc.) emphasizes scalable applications, since users like to run their favorite programs on the terminal they operate at that moment. Therefore appliances are of interest, which can be adapted to the hardware realities without loosing a lot of their functionalities. A good example for this is "Facial Animation," which offers an interesting way to achieve such "scalability." By employing MPEG-4, which provides an own profile for facial animation, a solution for low power terminals including mobile phones is demonstrated. From the generic 3D MPEG-4 face a specific 2D head model is derived, which consists primarily of a portrait image superposed by a suited warping mesh and adapted 2D animation rules. Thus the animation process of MPEG-4 need not be changed and standard compliant facial animation parameters can be used to displace the vertices of the mesh and warp the underlying image accordingly.
Cluster algebras in scattering amplitudes with special 2D kinematics
Energy Technology Data Exchange (ETDEWEB)
Torres, Marcus A.C. [Institut de Physique Theorique, CEA-Saclay, Gif-sur-Yvette Cedex (France)
2014-02-15
We study the cluster algebra of the kinematic configuration space Conf{sub n}(P{sup 3}P3) of an n-particle scattering amplitude restricted to the special 2D kinematics. We found that the n-point two-loop MHVremainder function in special 2D kinematics depends on a selection of the X-coordinates that are part of a special structure of the cluster algebra related to snake triangulations of polygons. This structure forms a necklace of hypercube beads in the corresponding Stasheff polytope. Furthermore at n = 12, the cluster algebra and the selection of theX-coordinates in special2Dkinematics replicates the cluster algebra and the selection of X-coordinates of the n = 6 two-loop MHV amplitude in 4D kinematics. (orig.)
2D-immunoblotting analysis of Sporothrix schenckii cell wall
Directory of Open Access Journals (Sweden)
Estela Ruiz-Baca
2011-03-01
Full Text Available We utilized two-dimensional gel electrophoresis and immunoblotting (2D-immunoblotting with anti-Sporothrix schenckii antibodies to identify antigenic proteins in cell wall preparations obtained from the mycelial and yeast-like morphologies of the fungus. Results showed that a 70-kDa glycoprotein (Gp70 was the major antigen detected in the cell wall of both morphologies and that a 60-kDa glycoprotein was present only in yeast-like cells. In addition to the Gp70, the wall from filament cells showed four proteins with molecular weights of 48, 55, 66 and 67 kDa, some of which exhibited several isoforms. To our knowledge, this is the first 2D-immunoblotting analysis of the S. schenckii cell wall.
Room temperature Sieving of Hydrogen Isotopes Using 2-D Materials
Energy Technology Data Exchange (ETDEWEB)
Hitchcock, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Krentz, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Serkiz, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Velten, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Xiao, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)
2017-09-28
Hydrogen isotope separation is critical to the DOE’s mission in environmental remediation and nuclear nonproliferation. Isotope separation is also a critical technology for the NNSA, and the ability to perform the separations at room temperature with a relatively small amount of power and space would be a major advancement for their respective missions. Recent work has shown that 2-D materials such as graphene and hexagonal boron nitride can act as an isotopic sieve at room temperature; efficiently separating hydrogen isotopes in water with reported separation ratios of 10:1 for hydrogen: deuterium separation for a single pass. The work performed here suggests that this technique has merit, and furthermore, we are investigating optimization and scale up of the required 2-D material based membranes.
2D-grafiikan käyttö peliprojektissa
Reimi-Orsa, Anniina
2010-01-01
Opinnäytetyö on projektikuvaus, jossa on käsitelty kaksiulotteisen grafiikan käyttöä peliprojektissa toteutettujen töiden kautta. Työharjoittelussani tuotin materiaalia peliprojektiin, jonka maailma luotiin pääasiassa 2D-grafiikan avulla. Projektikuvauksessa on käyty läpi työn kulkua alkuvalmisteluista valmiiseen pelissä käytettävään grafiikkaan sekä käytäntöjä tämän tyyppisen 2D-grafiikan tuotannossa. Alussa peliprojektia on käsitelty yleisluontoisesti sekä avattu työssä käytettyjä ja p...
Two-particle microrheology of quasi-2D viscous systems.
Prasad, V; Koehler, S A; Weeks, Eric R
2006-10-27
We study the spatially correlated motions of colloidal particles in a quasi-2D system (human serum albumin protein molecules at an air-water interface) for different surface viscosities eta s. We observe a transition in the behavior of the correlated motion, from 2D interface dominated at high eta s to bulk fluid dependent at low eta s. The correlated motions can be scaled onto a master curve which captures the features of this transition. This master curve also characterizes the spatial dependence of the flow field of a viscous interface in response to a force. The scale factors used for the master curve allow for the calculation of the surface viscosity eta s that can be compared to one-particle measurements.
2D/3D Program work summary report
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-09-01
The 2D/3D Program was carried out by Germany, Japan and the United States to investigate the thermal-hydraulics of a PWR large-break LOCA. A contributory approach was utilized in which each country contributed significant effort to the program and all three countries shared the research results. Germany constructed and operated the Upper Plenum Test Facility (UPTF), and Japan constructed and operated the Cylindrical Core Test Facility (CCTF) and the Slab Core Test Facility (SCTF). The US contribution consisted of provision of advanced instrumentation to each of the three test facilities, and assessment of the TRAC computer code against the test results. Evaluations of the test results were carried out in all three countries. This report summarizes the 2D/3D Program in terms of the contributing efforts of the participants, and was prepared in a coordination among three countries. US and Germany have published the report as NUREG/IA-0126 and GRS-100, respectively. (author).
2-D and 3-D computations of curved accelerator magnets
International Nuclear Information System (INIS)
Turner, L.R.
1991-01-01
In order to save computer memory, a long accelerator magnet may be computed by treating the long central region and the end regions separately. The dipole magnets for the injector synchrotron of the Advanced Photon Source (APS), now under construction at Argonne National Laboratory (ANL), employ magnet iron consisting of parallel laminations, stacked with a uniform radius of curvature of 33.379 m. Laplace's equation for the magnetic scalar potential has a different form for a straight magnet (x-y coordinates), a magnet with surfaces curved about a common center (r-θ coordinates), and a magnet with parallel laminations like the APS injector dipole. Yet pseudo 2-D computations for the three geometries give basically identical results, even for a much more strongly curved magnet. Hence 2-D (x-y) computations of the central region and 3-D computations of the end regions can be combined to determine the overall magnetic behavior of the magnets. 1 ref., 6 figs
2D/3D Program work summary report
International Nuclear Information System (INIS)
1995-09-01
The 2D/3D Program was carried out by Germany, Japan and the United States to investigate the thermal-hydraulics of a PWR large-break LOCA. A contributory approach was utilized in which each country contributed significant effort to the program and all three countries shared the research results. Germany constructed and operated the Upper Plenum Test Facility (UPTF), and Japan constructed and operated the Cylindrical Core Test Facility (CCTF) and the Slab Core Test Facility (SCTF). The US contribution consisted of provision of advanced instrumentation to each of the three test facilities, and assessment of the TRAC computer code against the test results. Evaluations of the test results were carried out in all three countries. This report summarizes the 2D/3D Program in terms of the contributing efforts of the participants, and was prepared in a coordination among three countries. US and Germany have published the report as NUREG/IA-0126 and GRS-100, respectively. (author)
The 2-D lattice theory of Flower Constellations
Avendaño, Martín E.; Davis, Jeremy J.; Mortari, Daniele
2013-08-01
The 2-D lattice theory of Flower Constellations, generalizing Harmonic Flower Constellations (the symmetric subset of Flower Constellations) as well as the Walker/ Mozhaev constellations, is presented here. This theory is a new general framework to design symmetric constellations using a 2× 2 lattice matrix of integers or by its minimal representation, the Hermite normal form. From a geometrical point of view, the phasing of satellites is represented by a regular pattern (lattice) on a two-Dimensional torus. The 2-D lattice theory of Flower Constellations does not require any compatibility condition and uses a minimum set of integer parameters whose meaning are explored throughout the paper. This general minimum-parametrization framework allows us to obtain all symmetric distribution of satellites. Due to the J_2 effect this design framework is meant for circular orbits and for elliptical orbits at critical inclination, or to design elliptical constellations for the unperturbed Keplerian case.
Beam test of the 2D position sensitive neutron detector
International Nuclear Information System (INIS)
Tian Lichao; Chen Yuanbo; Sun Zhijia; Tang Bin; Zhou Jianrong; Qi Huirong; Liu Rongguang; Zhang Jian; Yang Guian; Xu Hong
2014-01-01
China Spallation Neutron Source (CSNS), one of the Major scientific apparatuses of the national Eleventh Five-Year Plane, is under construction and three spectrumeters will be constructed in the first phase of the project. A 2D position sensitive neutron detector has been constructed for the Multifunctional Reflect spectrumeter (MR) in Institute of High Energy Physics (IHEP). The basic operation principle of the detector and the test on the residual stress diffractometer of Chinese Advanced Research Reactor (CARR) in China Institute of Atomic Energy (CIAE) is introduced in this paper. The results show that it has a good position resolution of l.18 mm (FWHM) for the neutrons of l.37 A and 2D imaging ability, which is consistent with the theory. It can satisfy the requirements of MR and lays the foundation for the construction of larger neutron detectors. (authors)
A 2-D nucleation-growth model of spheroidal graphite
International Nuclear Information System (INIS)
Lacaze, Jacques; Bourdie, Jacques; Castro-Román, Manuel Jesus
2017-01-01
Analysis of recent experimental investigations, in particular by transmission electron microscopy, suggests spheroidal graphite grows by 2-D nucleation of new graphite layers at the outer surface of the nodules. These layers spread over the surface along the prismatic direction of graphite which is the energetically preferred growth direction of graphite when the apparent growth direction of the nodules is along the basal direction of graphite. 2-D nucleation-growth models first developed for precipitation of pure substances are then adapted to graphite growth from the liquid in spheroidal graphite cast irons. Lateral extension of the new graphite layers is controlled by carbon diffusion in the liquid. This allows describing quantitatively previous experimental results giving strong support to this approach.
DEVELOPMENT OF 2D HUMAN BODY MODELING USING THINNING ALGORITHM
Directory of Open Access Journals (Sweden)
K. Srinivasan
2010-11-01
Full Text Available Monitoring the behavior and activities of people in Video surveillance has gained more applications in Computer vision. This paper proposes a new approach to model the human body in 2D view for the activity analysis using Thinning algorithm. The first step of this work is Background subtraction which is achieved by the frame differencing algorithm. Thinning algorithm has been used to find the skeleton of the human body. After thinning, the thirteen feature points like terminating points, intersecting points, shoulder, elbow, and knee points have been extracted. Here, this research work attempts to represent the body model in three different ways such as Stick figure model, Patch model and Rectangle body model. The activities of humans have been analyzed with the help of 2D model for the pre-defined poses from the monocular video data. Finally, the time consumption and efficiency of our proposed algorithm have been evaluated.
The Ising model coupled to 2d orders
Glaser, Lisa
2018-04-01
In this article we make first steps in coupling matter to causal set theory in the path integral. We explore the case of the Ising model coupled to the 2d discrete Einstein Hilbert action, restricted to the 2d orders. We probe the phase diagram in terms of the Wick rotation parameter β and the Ising coupling j and find that the matter and the causal sets together give rise to an interesting phase structure. The couplings give rise to five different phases. The causal sets take on random or crystalline characteristics as described in Surya (2012 Class. Quantum Grav. 29 132001) and the Ising model can be correlated or uncorrelated on the random orders and correlated, uncorrelated or anti-correlated on the crystalline orders. We find that at least one new phase transition arises, in which the Ising spins push the causal set into the crystalline phase.
Electrical spin injection into high mobility 2D systems.
Oltscher, M; Ciorga, M; Utz, M; Schuh, D; Bougeard, D; Weiss, D
2014-12-05
We report on spin injection into a high mobility 2D electron system confined at an (Al,Ga)As/GaAs interface, using (Ga,Mn)As Esaki diode contacts as spin aligners. We measured a clear nonlocal spin valve signal, which varies nonmonotonically with the applied bias voltage. The magnitude of the signal cannot be described by the standard spin drift-diffusion model, because at maximum this would require the spin polarization of the injected current to be much larger than 100%, which is unphysical. A strong correlation of the spin signal with contact width and electron mean free path suggests that ballistic transport in the 2D region below ferromagnetic contacts should be taken into account to fully describe the results.
Energy Technology Data Exchange (ETDEWEB)
David, Mariano G.; Pires, Evandro J.; Magalhaes, Luis A.; Almeida, Carlos E. de; Alves, Carlos F.E., E-mail: marianogd08@gmail.com [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Lab. Ciencias Radiologicas; Albuquerque, Marcos A. [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil). Instituto Alberto Luiz Coimbra; Bernal, Mario A. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Instituto de Fisica Gleb Wataghin; Peixoto, Jose G. [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)
2012-08-15
This paper focuses on the obtainment, using experimental and Monte Carlo-simulated (MMC) methods, of the photon spectra at various depths and depth-dose deposition curves for x-rays beams used in mammography, obtained on a polymethylmethacrylate (PMMA) breast phantom. Spectra were obtained for 28 and 30 kV quality-beams and the corresponding average energy values (Emed) were calculated. For the experimental acquisition was used a Si-PIN photodiode spectrometer and for the MMC simulations the PENELOPE code was employed. The simulated and the experimental spectra show a very good agreement, which was corroborated by the low differences found between the Emed values. An increase in the Emed values and a strong attenuation of the beam through the depth of the PMMA phantom was also observed. (author)
Conformal field theory and 2D critical phenomena. Part 1
International Nuclear Information System (INIS)
Zamolodchikov, A.B.; Zamolodchikov, Al.B.
1989-01-01
Review of the recent developments in the two-dimensional conformal field theory and especially its applications to the physics of 2D critical phenomena is given. It includes the Ising model, the Potts model. Minimal models, corresponding to theories invariant under higher symmetries, such as superconformal theories, parafermionic theories and theories with current and W-algebras are also discussed. Non-hamiltonian approach to two-dimensional field theory is formulated. 126 refs
Spontaneous compactification in 2D induced quantum gravity
International Nuclear Information System (INIS)
Elizalde, E.; Odintsov, S.D.
1992-01-01
In this paper spontaneous compactification - on a R 1 x S 1 background - in 2D induced quantum gravity (considered as a toy model for more fundamental quantum gravity) is analyzed in the gauge-independent effective action formalism. It is shown that such compactification is stable, in contradistinction to multidimensional quantum gravity on a R degrees x S 1 (D-> 2) background - which is known to be one-loop unstable
2D/ 3D Quantitative Ultrasound of the Breast
Nasief, Haidy Gerges
Breast cancer is the second leading cause of cancer death of women in the United States, so breast cancer screening for early detection is common. The purpose of this dissertation is to optimize quantitative ultrasound (QUS) methods to improve the specificity and objectivity of breast ultrasound. To pursue this goal, the dissertation is divided into two parts: 1) to optimize 2D QUS, and 2) to introduce and validate 3D QUS. Previous studies had validated these methods in phantoms. Applying our QUS analysis on subcutaneous breast fat demonstrated that QUS parameter estimates for subcutaneous fat were consistent among different human subjects. This validated our in vivo data acquisition methods and supported the use of breast fat as a clinical reference tissue for ultrasound BI-RADSRTM assessments. Although current QUS methods perform well for straightforward cases when assumptions of stationarity and diffuse scattering are well-founded, these conditions often are not present due to the complicated nature of in vivo breast tissue. Key improvements in QUS algorithms to address these challenges were: 1) applying a "modified least squares method (MLSM)" to account for the heterogeneous tissue path between the transducer and the region of interest, ROI; 2) detecting anisotropy in acoustic parameters; and 3) detecting and removing the echo sources that depart from diffuse and stationary scattering conditions. The results showed that a Bayesian classifier combining three QUS parameters in a biased pool of high-quality breast ultrasound data successfully differentiated all fibroadenomas from all carcinomas. Given promising initial results in 2D, extension to 3D acquisitions in QUS provided a unique capability to test QUS for the entire breast volume. QUS parameter estimates using 3D data were consistent with those found in 2D for phantoms and in vivo data. Extensions of QUS technology from 2D to 3D can improve the specificity of breast ultrasound, and thus, could lead to
The Seismic Analyzer: Interpreting and Illustrating 2D Seismic Data
Patel, Daniel; Giertsen, Christopher; Thurmond, John; Gjelberg, John; Gröller, Eduard
2008-01-01
We present a toolbox for quickly interpreting and illustrating 2D slices of seismic volumetric reflection data. Searching for oil and gas involves creating a structural overview of seismic reflection data to identify hydrocarbon reservoirs. We improve the search of seismic structures by precalculating the horizon structures of the seismic data prior to interpretation. We improve the annotation of seismic structures by applying novel illustrative rendering algorithms tailored to seism...
Report of the 1988 2-D Intercomparison Workshop, chapter 3
Jackman, Charles H.; Brasseur, Guy; Soloman, Susan; Guthrie, Paul D.; Garcia, Rolando; Yung, Yuk L.; Gray, Lesley J.; Tung, K. K.; Ko, Malcolm K. W.; Isaken, Ivar
1989-01-01
Several factors contribute to the errors encountered. With the exception of the line-by-line model, all of the models employ simplifying assumptions that place fundamental limits on their accuracy and range of validity. For example, all 2-D modeling groups use the diffusivity factor approximation. This approximation produces little error in tropospheric H2O and CO2 cooling rates, but can produce significant errors in CO2 and O3 cooling rates at the stratopause. All models suffer from fundamental uncertainties in shapes and strengths of spectral lines. Thermal flux algorithms being used in 2-D tracer tranport models produce cooling rates that differ by as much as 40 percent for the same input model atmosphere. Disagreements of this magnitude are important since the thermal cooling rates must be subtracted from the almost-equal solar heating rates to derive the net radiative heating rates and the 2-D model diabatic circulation. For much of the annual cycle, the net radiative heating rates are comparable in magnitude to the cooling rate differences described. Many of the models underestimate the cooling rates in the middle and lower stratosphere. The consequences of these errors for the net heating rates and the diabatic circulation will depend on their meridional structure, which was not tested here. Other models underestimate the cooling near 1 mbar. Suchs errors pose potential problems for future interactive ozone assessment studies, since they could produce artificially-high temperatures and increased O3 destruction at these levels. These concerns suggest that a great deal of work is needed to improve the performance of thermal cooling rate algorithms used in the 2-D tracer transport models.
2D and 3D Traveling Salesman Problem
Haxhimusa, Yll; Carpenter, Edward; Catrambone, Joseph; Foldes, David; Stefanov, Emil; Arns, Laura; Pizlo, Zygmunt
2011-01-01
When a two-dimensional (2D) traveling salesman problem (TSP) is presented on a computer screen, human subjects can produce near-optimal tours in linear time. In this study we tested human performance on a real and virtual floor, as well as in a three-dimensional (3D) virtual space. Human performance on the real floor is as good as that on a…
Energy transfer mechanisms in layered 2D perovskites.
Williams, Olivia F; Guo, Zhenkun; Hu, Jun; Yan, Liang; You, Wei; Moran, Andrew M
2018-04-07
Two-dimensional (2D) perovskite quantum wells are generating broad scientific interest because of their potential for use in optoelectronic devices. Recently, it has been shown that layers of 2D perovskites can be grown in which the average thicknesses of the quantum wells increase from the back to the front of the film. This geometry carries implications for light harvesting applications because the bandgap of a quantum well decreases as its thickness increases. The general structural formula for the 2D perovskite systems under investigation in this work is (PEA) 2 (MA) n-1 [Pb n I 3n+1 ] (PEA = phenethyl ammonium, MA = methyl ammonium). Here, we examine two layered 2D perovskites with different distributions of quantum well thicknesses. Spectroscopic measurements and model calculations suggest that both systems funnel electronic excitations from the back to the front of the film through energy transfer mechanisms on the time scales of 100's of ps (i.e., energy transfer from thinner to thicker quantum wells). In addition, the model calculations demonstrate that the transient absorption spectra are composed of a progression of single exciton and biexciton resonances associated with the individual quantum wells. We find that exciton dissociation and/or charge transport dynamics make only minor contributions to the transient absorption spectra within the first 1 ns after photo-excitation. An analysis of the energy transfer kinetics indicates that the transitions occur primarily between quantum wells with values of n that differ by 1 because of the spectral overlap factor that governs the energy transfer rate. Two-dimensional transient absorption spectra reveal a pattern of resonances consistent with the dominance of sequential energy transfer dynamics.
Energy transfer mechanisms in layered 2D perovskites
Williams, Olivia F.; Guo, Zhenkun; Hu, Jun; Yan, Liang; You, Wei; Moran, Andrew M.
2018-04-01
Two-dimensional (2D) perovskite quantum wells are generating broad scientific interest because of their potential for use in optoelectronic devices. Recently, it has been shown that layers of 2D perovskites can be grown in which the average thicknesses of the quantum wells increase from the back to the front of the film. This geometry carries implications for light harvesting applications because the bandgap of a quantum well decreases as its thickness increases. The general structural formula for the 2D perovskite systems under investigation in this work is (PEA)2(MA)n-1[PbnI3n+1] (PEA = phenethyl ammonium, MA = methyl ammonium). Here, we examine two layered 2D perovskites with different distributions of quantum well thicknesses. Spectroscopic measurements and model calculations suggest that both systems funnel electronic excitations from the back to the front of the film through energy transfer mechanisms on the time scales of 100's of ps (i.e., energy transfer from thinner to thicker quantum wells). In addition, the model calculations demonstrate that the transient absorption spectra are composed of a progression of single exciton and biexciton resonances associated with the individual quantum wells. We find that exciton dissociation and/or charge transport dynamics make only minor contributions to the transient absorption spectra within the first 1 ns after photo-excitation. An analysis of the energy transfer kinetics indicates that the transitions occur primarily between quantum wells with values of n that differ by 1 because of the spectral overlap factor that governs the energy transfer rate. Two-dimensional transient absorption spectra reveal a pattern of resonances consistent with the dominance of sequential energy transfer dynamics.
EDGE2D Simulations of JET 13C Migration Experiments
International Nuclear Information System (INIS)
Strachan, J.D.; Coad, J.P.; Corrigan, G.; Matthews, G.F.; Spence, J.
2004-01-01
Material migration has received renewed interest due to tritium retention associated with carbon transport to remote vessel locations. Those results influence the desirability of carbon usage on ITER. Subsequently, additional experiments have been performed, including tracer experiments attempting to identify material migration from specific locations. In this paper, EDGE2D models a well-diagnosed JET 13 C tracer migration experiment. The role of SOL flows upon the migration patterns is identified
Adaptyvaus 2d pozicionavimo metodo autonominiam robotui tyrimas
Senvaitis, Vytautas
2016-01-01
Overview SLAM algorithm, laser distance scanner working principle, EKF and UKF filters in analytical part. EKF mathematical models are implemented for autonomous robot whit two-wheel drive and for laser distance scanner. EKF and UKF filters are compared. 2D robot positioning with EKF filter are modeled and simulated in MATALB and STM32 microcontroller with DSP library. MATLAB and STM32 are compared in speed test. Analyzing EKF filter working. Design and construct autonomous robot experimental...
Design Application Translates 2-D Graphics to 3-D Surfaces
2007-01-01
Fabric Images Inc., specializing in the printing and manufacturing of fabric tension architecture for the retail, museum, and exhibit/tradeshow communities, designed software to translate 2-D graphics for 3-D surfaces prior to print production. Fabric Images' fabric-flattening design process models a 3-D surface based on computer-aided design (CAD) specifications. The surface geometry of the model is used to form a 2-D template, similar to a flattening process developed by NASA's Glenn Research Center. This template or pattern is then applied in the development of a 2-D graphic layout. Benefits of this process include 11.5 percent time savings per project, less material wasted, and the ability to improve upon graphic techniques and offer new design services. Partners include Exhibitgroup/Giltspur (end-user client: TAC Air, a division of Truman Arnold Companies Inc.), Jack Morton Worldwide (end-user client: Nickelodeon), as well as 3D Exhibits Inc., and MG Design Associates Corp.
MXene–2D layered electrode materials for energy storage
Directory of Open Access Journals (Sweden)
Hao Tang
2018-04-01
Full Text Available As promising candidates of power resources, electrochemical energy storage (EES devices have drawn more and more attention due to their ease of use, environmental friendliness, and high transformation efficiency. The performances of EES devices, such as lithium-ion batteries, sodium-ion batteries, and supercapacitors, depend largely on the inherent properties of electrode materials. On account of the outstanding properties of graphene, a lot of studies have been carried out on two-dimensional (2D materials. Over the past few years, a new exfoliation method has been utilized to successfully prepare a new family of 2D transition metal carbides, nitrides, and carbonitrides, termed MXene, from layered precursors. Moreover, some unique EES properties of MXene have been discovered. With rapid research progress on this field, a timely account about the applications of MXene in the EES fields is highly necessary. In this article, the research progress on the preparation, electrochemical performance, and mechanism analysis of MXene is summarized and discussed. We also propose some personal prospects for the further development of this field. Keywords: MXene, 2D materials, Electrochemistry, Battery, Supercapacitor
Exciton Dynamics of 2D Hybrid Perovskite Nanocrystal
Guo, Rui; Zhu, Zhuan; Boulesbaa, Abdelaziz; Venkatesan, Swaminathan; Xiao, Kai; Bao, Jiming; Yao, Yan; Li, Wenzhi
Organic-inorganic hybrid perovskites have emerged as promising materials for applications in photovoltaic and optoelectronic devices. Among the perovskites, two dimensional (2D) perovskites are of great interests due to their remarkable optical and electrical properties as well as the flexibility of material selection for the organic and inorganic moieties. In this study, we demonstrate the solution-phase growth of large square-shaped single-crystalline 2D hybrid perovskites of (C6H5C2H4 NH3) 2 PbBr4 with a few unit cells thickness. Compared to the bulk crystal, a band gap shift and new photoluminescence (PL) peak are observed from the hybrid perovskite sheets. Color of the 2D crystals can be tuned by adjusting the sheet thickness. Pump-probe spectroscopy is used to investigate the exciton dynamics and exhibits a biexponential decay with an amplitude-weighted lifetime of 16.7 ps. Such high-quality (C6H5C2H4 NH3) 2 PbBr4 sheets are expected to have high PL quantum efficiency which can be adopted for light-emitting devices. National Science Foundation (Grant No. CMMI-1334417 and DMR-1506640).
Hybrid 3D-2D printing for bone scaffolds fabrication
Seleznev, V. A.; Prinz, V. Ya
2017-02-01
It is a well-known fact that bone scaffold topography on micro- and nanometer scale influences the cellular behavior. Nano-scale surface modification of scaffolds allows the modulation of biological activity for enhanced cell differentiation. To date, there has been only a limited success in printing scaffolds with micro- and nano-scale features exposed on the surface. To improve on the currently available imperfect technologies, in our paper we introduce new hybrid technologies based on a combination of 2D (nano imprint) and 3D printing methods. The first method is based on using light projection 3D printing and simultaneous 2D nanostructuring of each of the layers during the formation of the 3D structure. The second method is based on the sequential integration of preliminarily created 2D nanostructured films into a 3D printed structure. The capabilities of the developed hybrid technologies are demonstrated with the example of forming 3D bone scaffolds. The proposed technologies can be used to fabricate complex 3D micro- and nanostructured products for various fields.
F-theory and 2d (0,2) theories
Energy Technology Data Exchange (ETDEWEB)
Schäfer-Nameki, Sakura [Department of Mathematics, King’s College London, The Strand, London WC2R 2LS (United Kingdom); Weigand, Timo [Institut für Theoretische Physik, Ruprecht-Karls-Universität,Philosophenweg 19, 69120 Heidelberg (Germany)
2016-05-11
F-theory compactified on singular, elliptically fibered Calabi-Yau five-folds gives rise to two-dimensional gauge theories preserving N=(0,2) supersymmetry. In this paper we initiate the study of such compactifications and determine the dictionary between the geometric data of the elliptic fibration and the 2d gauge theory such as the matter content in terms of (0,2) superfields and their supersymmetric couplings. We study this setup both from a gauge-theoretic point of view, in terms of the partially twisted 7-brane theory, and provide a global geometric description based on the structure of the elliptic fibration and its singularities. Global consistency conditions are determined and checked against the dual M-theory compactification to one dimension. This includes a discussion of gauge anomalies, the structure of the Green-Schwarz terms and the Chern-Simons couplings in the dual M-theory supersymmetric quantum mechanics. Furthermore, by interpreting the resulting 2d (0,2) theories as heterotic worldsheet theories, we propose a correspondence between the geometric data of elliptically fibered Calabi-Yau five-folds and the target space of a heterotic gauged linear sigma-model (GLSM). In particular the correspondence between the Landau-Ginsburg and sigma-model phase of a 2d (0,2) GLSM is realized via different T-branes or gluing data in F-theory.
International Nuclear Information System (INIS)
Hennig, Ewa E.; Piatkowska, Magdalena; Karczmarski, Jakub; Goryca, Krzysztof; Brewczynska, Elzbieta; Jazwiec, Radoslaw; Kluska, Anna; Omiotek, Robert; Paziewska, Agnieszka; Dadlez, Michal; Ostrowski, Jerzy
2015-01-01
Tamoxifen, the most frequently used drug for treating estrogen receptor-positive breast cancer, must be converted into active metabolites to exert its therapeutic efficacy, mainly through CYP2D6 enzymes. The objective of this study was to investigate the impact of CYP2D6 polymorphisms on (Z)-endoxifen-directed tamoxifen metabolism and to assess the usefulness of CYP2D6 genotyping for identifying patients who are likely to have insufficient (Z)-endoxifen concentrations to benefit from standard therapy. Blood samples from 279 Polish women with breast cancer receiving tamoxifen 20 mg daily were analyzed for CYP2D6 genotype and drug metabolite concentration. Steady-state plasma levels of tamoxifen and its 14 metabolites were measured by using the ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method. In nearly 60 % of patients, including over 30 % of patients with fully functional CYP2D6, (Z)-endoxifen concentration was below the predefined threshold of therapeutic efficacy. The most frequently observed CYP2D6 genotype was EM/PM (34.8 %), among which 83.5 % of patients had a combination of wild-type and *4 alleles. Plasma concentration of five metabolites was significantly correlated with CYP2D6 genotype. For the first time, we identified an association between decreased (E/Z)-4-OH-N-desmethyl-tamoxifen-β-D-glucuronide levels (r 2 = 0.23; p < 10 −16 ) and increased CYP2D6 functional impairment. The strongest correlation was observed for (Z)-endoxifen, whose concentration was significantly lower in groups of patients carrying at least one CYP2D6 null allele, compared with EM/EM patients. The CYP2D6 genotype accounted for plasma level variability of (Z)-endoxifen by 27 % (p < 10 −16 ) and for the variability of metabolic ratio indicating (Z)-endoxifen-directed metabolism of tamoxifen by 51 % (p < 10 −43 ). The majority of breast cancer patients in Poland may not achieve a therapeutic level of (Z)-endoxifen upon receiving a standard
A very fast implementation of 2D iterative reconstruction algorithms
DEFF Research Database (Denmark)
Toft, Peter Aundal; Jensen, Peter James
1996-01-01
that iterative reconstruction algorithms can be implemented and run almost as fast as direct reconstruction algorithms. The method has been implemented in a software package that is available for free, providing reconstruction algorithms using ART, EM, and the Least Squares Conjugate Gradient Method...
Reconstruction of 3D structures of MET antibodies from electron microscopy 2D class averages.
Directory of Open Access Journals (Sweden)
Qi Chen
Full Text Available Dynamics of three MET antibody constructs (IgG1, IgG2, and IgG4 and the IgG4-MET antigen complex was investigated by creating their atomic models with an integrative experimental and computational approach. In particular, we used two-dimensional (2D Electron Microscopy (EM images, image class averaging, homology modeling, Rapidly exploring Random Tree (RRT structure sampling, and fitting of models to images, to find the relative orientations of antibody domains that are consistent with the EM images. We revealed that the conformational preferences of the constructs depend on the extent of the hinge flexibility. We also quantified how the MET antigen impacts on the conformational dynamics of IgG4. These observations allow to create testable hypothesis to investigate MET biology. Our protocol may also help describe structural diversity of other antigen systems at approximately 5 Å precision, as quantified by Root-Mean-Square Deviation (RMSD among good-scoring models.
ELRIS2D: A MATLAB Package for the 2D Inversion of DC Resistivity/IP Data
Akca Irfan
2016-01-01
ELRIS2D is an open source code written in MATLAB for the two-dimensional inversion of direct current resistivity (DCR) and time domain induced polarization (IP) data. The user interface of the program is designed for functionality and ease of use. All available settings of the program can be reached from the main window. The subsurface is discretized using a hybrid mesh generated by the combination of structured and unstructured meshes, which reduces the computational cost of the whole invers...
2D/3D/4D ULTRASOUND IN INFERTILITY MANAGEMENT
Directory of Open Access Journals (Sweden)
Uršula Reš-Muravec
2018-02-01
Ultrasound in infertility diagnostics: Ultrasound is used for examination of uterus, tubes, ovaries and peritoneal cause of infertility. It can be used in different menstrual phases: proliferative, periovulatory and secretory phase. Examination of uterus: A 2D scan can measure the size of the uterus (length, width and depth and a 2D flow (colour and power doppler. With 3D technology we can measure the whole volume with VOCAL (virtual organ computer-aided analysis and 3D circulation with the index (VI – vascular index, FI – flow index and VFI – vascular flow index in the uterus. A 2D scan can help us define uterine malformations, fibroids and adenomyosis to a certain extent. However, a 3D scan offers more accurate diagnosis of these malformations. Endometrium is examined separately. With 2D the width is measured and morphology and focal lesions (polyp, fibroids, adhesions are examined. With 3D the real sagital plane for the width measurement can be defined . We can measure the volume of endometrium and subendometrium and 3D circulation in endometrium and subendometrium. The FIS (f luid instlation sonography is very useful when examining the endometrium; saline or gel can be used for uterine instalation. We can measure and define the position of the structures in the endometrium more accurately when they are surrouned by saline or gel. We can view these structures with a surface view, similar to the one used for hysteroscopy. With this information we can explain the pathology to the patient and easily plan the surgical procedures. Examination of the tubes: With 2D US we can see the tubes in the pelvis only if there are dilatations, but sometimes it is difficult to distinguish them from the neighbouring forma- tions. With a 3D ultrasound we can define the shape and continuity of the tube and we can view the tube from different angles (inversion mode. Different contrast media are used for determining tubal patency. Tubal patency can be diagnosed with 2D Hy
2D Seismic Reflection Data across Central Illinois
Energy Technology Data Exchange (ETDEWEB)
Smith, Valerie; Leetaru, Hannes
2014-09-30
In a continuing collaboration with the Midwest Geologic Sequestration Consortium (MGSC) on the Evaluation of the Carbon Sequestration Potential of the Cambro-Ordovician Strata of the Illinois and Michigan Basins project, Schlumberger Carbon Services and WesternGeco acquired two-dimensional (2D) seismic data in the Illinois Basin. This work included the design, acquisition and processing of approximately 125 miles of (2D) seismic reflection surveys running west to east in the central Illinois Basin. Schlumberger Carbon Services and WesternGeco oversaw the management of the field operations (including a pre-shoot planning, mobilization, acquisition and de-mobilization of the field personnel and equipment), procurement of the necessary permits to conduct the survey, post-shoot closure, processing of the raw data, and provided expert consultation as needed in the interpretation of the delivered product. Three 2D seismic lines were acquired across central Illinois during November and December 2010 and January 2011. Traversing the Illinois Basin, this 2D seismic survey was designed to image the stratigraphy of the Cambro-Ordovician sections and also to discern the basement topography. Prior to this survey, there were no regionally extensive 2D seismic data spanning this section of the Illinois Basin. Between the NW side of Morgan County and northwestern border of Douglas County, these seismic lines ran through very rural portions of the state. Starting in Morgan County, Line 101 was the longest at 93 miles in length and ended NE of Decatur, Illinois. Line 501 ran W-E from the Illinois Basin – Decatur Project (IBDP) site to northwestern Douglas County and was 25 miles in length. Line 601 was the shortest and ran N-S past the IBDP site and connected lines 101 and 501. All three lines are correlated to well logs at the IBDP site. Originally processed in 2011, the 2D seismic profiles exhibited a degradation of signal quality below ~400 millisecond (ms) which made
Data of evolutionary structure change: 1ONAD-2D3PC [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3PC 1ONA 2D3P D C ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...14> 1ONA D 1ONAD
Data of evolutionary structure change: 1ONAD-2D3PA [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3PA 1ONA 2D3P D A ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ONA D 1ONAD LTRVSSNGSPQ
Data of evolutionary structure change: 1ONAD-2D3PB [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3PB 1ONA 2D3P D B ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ain> 1ONA D 1ONAD TR
Data of evolutionary structure change: 1ONAD-2D3RA [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3RA 1ONA 2D3R D A ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ID>1ONA D 1ONAD TRVSSNGSPQG <
Data of evolutionary structure change: 1ONAD-2D3RC [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3RC 1ONA 2D3R D C ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT... 1ONA D 1ONAD TRVSSN
Data of evolutionary structure change: 1ONAD-2D3RD [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3RD 1ONA 2D3R D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLK------TNALHFMFNQFSKDQKDLILQGDAT...n> 1ONA D 1ONAD TRVS
2D to 3D conversion implemented in different hardware
Ramos-Diaz, Eduardo; Gonzalez-Huitron, Victor; Ponomaryov, Volodymyr I.; Hernandez-Fragoso, Araceli
2015-02-01
Conversion of available 2D data for release in 3D content is a hot topic for providers and for success of the 3D applications, in general. It naturally completely relies on virtual view synthesis of a second view given by original 2D video. Disparity map (DM) estimation is a central task in 3D generation but still follows a very difficult problem for rendering novel images precisely. There exist different approaches in DM reconstruction, among them manually and semiautomatic methods that can produce high quality DMs but they demonstrate hard time consuming and are computationally expensive. In this paper, several hardware implementations of designed frameworks for an automatic 3D color video generation based on 2D real video sequence are proposed. The novel framework includes simultaneous processing of stereo pairs using the following blocks: CIE L*a*b* color space conversions, stereo matching via pyramidal scheme, color segmentation by k-means on an a*b* color plane, and adaptive post-filtering, DM estimation using stereo matching between left and right images (or neighboring frames in a video), adaptive post-filtering, and finally, the anaglyph 3D scene generation. Novel technique has been implemented on DSP TMS320DM648, Matlab's Simulink module over a PC with Windows 7, and using graphic card (NVIDIA Quadro K2000) demonstrating that the proposed approach can be applied in real-time processing mode. The time values needed, mean Similarity Structural Index Measure (SSIM) and Bad Matching Pixels (B) values for different hardware implementations (GPU, Single CPU, and DSP) are exposed in this paper.
Non-Newtonian fluid flow in 2D fracture networks
Zou, L.; Håkansson, U.; Cvetkovic, V.
2017-12-01
Modeling of non-Newtonian fluid (e.g., drilling fluids and cement grouts) flow in fractured rocks is of interest in many geophysical and industrial practices, such as drilling operations, enhanced oil recovery and rock grouting. In fractured rock masses, the flow paths are dominated by fractures, which are often represented as discrete fracture networks (DFN). In the literature, many studies have been devoted to Newtonian fluid (e.g., groundwater) flow in fractured rock using the DFN concept, but few works are dedicated to non-Newtonian fluids.In this study, a generalized flow equation for common non-Newtonian fluids (such as Bingham, power-law and Herschel-Bulkley) in a single fracture is obtained from the analytical solutions for non-Newtonian fluid discharge between smooth parallel plates. Using Monte Carlo sampling based on site characterization data for the distribution of geometrical features (e.g., density, length, aperture and orientations) in crystalline fractured rock, a two dimensional (2D) DFN model is constructed for generic flow simulations. Due to complex properties of non-Newtonian fluids, the relationship between fluid discharge and the pressure gradient is nonlinear. A Galerkin finite element method solver is developed to iteratively solve the obtained nonlinear governing equations for the 2D DFN model. Using DFN realizations, simulation results for different geometrical distributions of the fracture network and different non-Newtonian fluid properties are presented to illustrate the spatial discharge distributions. The impact of geometrical structures and the fluid properties on the non-Newtonian fluid flow in 2D DFN is examined statistically. The results generally show that modeling non-Newtonian fluid flow in fractured rock as a DFN is feasible, and that the discharge distribution may be significantly affected by the geometrical structures as well as by the fluid constitutive properties.
Novel 2D representation of vibration for local damage detection
Directory of Open Access Journals (Sweden)
Grzegorz Żak
2014-07-01
Full Text Available In this paper a new 2D representation for local damage detection is presented. It is based on a vibration time series analysis. A raw vibration signal is decomposed via short-time Fourier transform and new time series for each frequency bin are differentiated to decorrelate them. For each time series, autocorrelation function is calculated. In the next step ACF maps are constructed. For healthy bearing ACF map should not have visible horizontal lines indicating damage. The method is illustrated by analysis of real data containing signals from damaged bearing and healthy for comparison.
Deep Cuboid Detection: Beyond 2D Bounding Boxes
Dwibedi, Debidatta; Malisiewicz, Tomasz; Badrinarayanan, Vijay; Rabinovich, Andrew
2016-01-01
We present a Deep Cuboid Detector which takes a consumer-quality RGB image of a cluttered scene and localizes all 3D cuboids (box-like objects). Contrary to classical approaches which fit a 3D model from low-level cues like corners, edges, and vanishing points, we propose an end-to-end deep learning system to detect cuboids across many semantic categories (e.g., ovens, shipping boxes, and furniture). We localize cuboids with a 2D bounding box, and simultaneously localize the cuboid's corners,...
A new 2-d approach to iterative , learning control system
International Nuclear Information System (INIS)
Ashraf, S.; Muhammad, E.; Tasleem, M.
2004-01-01
The well known two-dimensional system theory is used to analyze and develop a class of learning control system. In this paper we first explore and test a method given by ZHENG and JAMSHIDI. In that paper all the input samples are treated at once. In comparison our paper presents a scheme in which one sample at a time is treated. The 2- D state-space model of proposed learning control scheme is given. An important consequence of the proposed scheme is that given the right choice of gain matrix and sampling time the system's output can be made to converge to any degree of accuracy. (author)
Topology-Preserving Rigid Transformation of 2D Digital Images.
Ngo, Phuc; Passat, Nicolas; Kenmochi, Yukiko; Talbot, Hugues
2014-02-01
We provide conditions under which 2D digital images preserve their topological properties under rigid transformations. We consider the two most common digital topology models, namely dual adjacency and well-composedness. This paper leads to the proposal of optimal preprocessing strategies that ensure the topological invariance of images under arbitrary rigid transformations. These results and methods are proved to be valid for various kinds of images (binary, gray-level, label), thus providing generic and efficient tools, which can be used in particular in the context of image registration and warping.
2D Inversion of Transient Electromagnetic Method (TEM)
Bortolozo, Cassiano Antonio; Luís Porsani, Jorge; Acácio Monteiro dos Santos, Fernando
2017-04-01
A new methodology was developed for 2D inversion of Transient Electromagnetic Method (TEM). The methodology consists in the elaboration of a set of routines in Matlab code for modeling and inversion of TEM data and the determination of the most efficient field array for the problem. In this research, the 2D TEM modeling uses the finite differences discretization. To solve the inversion problem, were applied an algorithm based on Marquardt technique, also known as Ridge Regression. The algorithm is stable and efficient and it is widely used in geoelectrical inversion problems. The main advantage of 1D survey is the rapid data acquisition in a large area, but in regions with two-dimensional structures or that need more details, is essential to use two-dimensional interpretation methodologies. For an efficient field acquisition we used in an innovative form the fixed-loop array, with a square transmitter loop (200m x 200m) and 25m spacing between the sounding points. The TEM surveys were conducted only inside the transmitter loop, in order to not deal with negative apparent resistivity values. Although it is possible to model the negative values, it makes the inversion convergence more difficult. Therefore the methodology described above has been developed in order to achieve maximum optimization of data acquisition. Since it is necessary only one transmitter loop disposition in the surface for each series of soundings inside the loop. The algorithms were tested with synthetic data and the results were essential to the interpretation of the results with real data and will be useful in future situations. With the inversion of the real data acquired over the Paraná Sedimentary Basin (PSB) was successful realized a 2D TEM inversion. The results indicate a robust geoelectrical characterization for the sedimentary and crystalline aquifers in the PSB. Therefore, using a new and relevant approach for 2D TEM inversion, this research effectively contributed to map the most
The multicomponent 2D Toda hierarchy: dispersionless limit
International Nuclear Information System (INIS)
Mañas, Manuel; Alonso, Luis Martínez
2009-01-01
The factorization problem of the multi-component 2D Toda hierarchy is used to analyze the dispersionless limit of this hierarchy. A dispersive version of the Whitham hierarchy defined in terms of scalar Lax and Orlov–Schulman operators is introduced and the corresponding additional symmetries and string equations are discussed. Then, it is shown how KP and Toda pictures of the dispersionless Whitham hierarchy emerge in the dispersionless limit. Moreover, the additional symmetries and string equations for the dispersive Whitham hierarchy are studied in this limit
Optical diffraction by ordered 2D arrays of silica microspheres
Shcherbakov, A. A.; Shavdina, O.; Tishchenko, A. V.; Veillas, C.; Verrier, I.; Dellea, O.; Jourlin, Y.
2017-03-01
The article presents experimental and theoretical studies of angular dependent diffraction properties of 2D monolayer arrays of silica microspheres. High-quality large area defect-free monolayers of 1 μm diameter silica microspheres were deposited by the Langmuir-Blodgett technique under an accurate optical control. Measured angular dependencies of zeroth and one of the first order diffraction efficiencies produced by deposited samples were simulated by the rigorous Generalized Source Method taking into account particle size dispersion and lattice nonideality.
Rotational Invariance of the 2d Spin - Spin Correlation Function
Pinson, Haru
2012-09-01
At the critical temperature in the 2d Ising model on the square lattice, we establish the rotational invariance of the spin-spin correlation function using the asymptotics of the spin-spin correlation function along special directions (McCoy and Wu in the two dimensional Ising model. Harvard University Press, Cambridge, 1973) and the finite difference Hirota equation for which the spin-spin correlation function is shown to satisfy (Perk in Phys Lett A 79:3-5, 1980; Perk in Proceedings of III international symposium on selected topics in statistical mechanics, Dubna, August 22-26, 1984, JINR, vol II, pp 138-151, 1985).
Hybrid animation integrating 2D and 3D assets
O'Hailey, Tina
2010-01-01
Artist imaginations continue to grow and stretch the boundaries of traditional animation. Successful animators adept and highly skilled in traditional animation mediums are branching out beyond traditional animation workflows and will often use multiple forms of animation in a single project. With the knowledge of 3D and 2D assets and the integration of multiple animation mediums into a single project, animators have a wealth of creative resources available for a project that is not limited to a specific animation medium, software package or workflow processs. Enhance a poignant scene by choos
A generalized 2-D Poincaré inequality
Directory of Open Access Journals (Sweden)
Crisciani Fulvio
2000-01-01
Full Text Available Two 1-D Poincaré-like inequalities are proved under the mild assumption that the integrand function is zero at just one point. These results are used to derive a 2-D generalized Poincare inequality in which the integrand function is zero on a suitable arc contained in the domain (instead of the whole boundary. As an application, it is shown that a set of boundary conditions for the quasi geostrophic equation of order four are compatible with general physical constraints dictated by the dissipation of kinetic energy.
DESAIN KOMUNIKASI DAKWAH VISUAL ANIMASI 2D UNTUK ANAK
Directory of Open Access Journals (Sweden)
Mokhamad Mahfud
2017-04-01
Full Text Available Dakwah activities as a communication process of delivering the teachings of Islam's ideal has no power to change people for the better. There are many causal factors, one of them is because of propagandas that has been done tends to be cold, impersonal, and is only informative sheer, yet using less effective communication ethics. A visual cultural revolution is now growing rapidly, unfortunately its dominated by capitalists and worshipers of lust. For example, nearly all visual ads is using the interest of sensuality and lust to lure customers. On the billboards, media newspapers, magazines, television and other media, visual communication seemed to be a valuable garbage, and this is very dangerous, especially if in the consumption of children who are mentally and immature psyche. The Effects of visual "value-free" communication can damage the sense of children as the next generation, we are slowly showed on-aurast which makes Muslims become stupid. This study aims to provide a creative space to explore the lives of children for the purpose of providing religious materials in SDN Monggang Pendowoharjo Sewon Bantul. 2D animation design is expected to give a message to children that religious material is not complicated but enjoyable. And the use of cartoon animation techniques in the making is in fact, expecting the material to be delivered to children to be light for their minds and appropriate with their entertainment media which is television. This research Visual Communication Design using 2d Animation For Children is using descriptive study which is a qualitative research method that analyze the words or sentences and separate it by category for the conclusion. Qualitative research aims to explain the phenomenon in detail and in-depth data collection that focuses on quality rather than the quantity of data. The results of this study is that the creation of 2D animation is effective to be a dakwah media for children that will be made with a
Resolving power test of 2-D K+ K+ interferometry
International Nuclear Information System (INIS)
Padula, Sandra S.; Roldao, Christiane G.
1999-01-01
Adopting a procedure previously proposed to quantitatively study pion interferometry 1 , an equivalent 2-D X 2 analysis was performed to test the resolving power of that method when applied to less favorable conditions, when no significant contribution from long lived resonances is expected, as in kaon interferometry. For that purpose, use is made of the preliminary E859 K + K + interferometry data from Si+Au collisions at 14.6 A GeV/c. Less sensitivity is achieved in the present case, although it is shown that it is still possible to distinguish two distinct decoupling geometries. (author)
Survey of 1 1/2D transport codes
International Nuclear Information System (INIS)
Grad, H.
1978-10-01
A survey is given of a family of classical transport codes, recently termed ''1 1/2D'', which efficiently and accurately follow the evolution of plasma configurations on a long time scale, following coupled changes in plasma shape and topology with transport (but not wave motion). Codes have been constructed and operated (since 1974) which include various combinations of finite beta, general plasma cross-section and aspect, various topologies (Doublet, tearing, reversed-field mirror) including time dependent transitions in topology resulting from external coil variation and plasma transport, with models including (classical) tensor resistivity and heat flow as well as the adiabatic limiting case
Conformal field theory and 2D quantum gravity
International Nuclear Information System (INIS)
Distler, J.; Kawai, Hikaru
1989-01-01
Inspired by the recent work of Knizhnik, Polyakov and Zamolodchikov on the solution of 2D quantum gravity in the 'light cone' gauge, we present a proposal for solving the theory in the usual conformal gauge. Our results for the critical exponents of the theory agree with the genus-zero results of KPZ. Since our formalism naturally generalizes to higher-genus Riemann surfaces, we obtain the critical exponents for all genera. The corresponding results for the supersymmetric case are presented. We also show how to calculate correlation functions in these theories. (orig.)
Microscopy of 2D Fermi gases. Exploring excitations and thermodynamics
Energy Technology Data Exchange (ETDEWEB)
Morgener, Kai Henning
2014-12-08
This thesis presents experiments on three-dimensional (3D) and two-dimensional (2D) ultracold fermionic {sup 6}Li gases providing local access to microscopic quantum many-body physics. A broad magnetic Feshbach resonance is used to tune the interparticle interaction strength freely to address the entire crossover between the Bose-Einstein-Condensate (BEC) and Bardeen-Cooper-Schrieffer (BCS) regime. We map out the critical velocity in the crossover from BEC to BCS superfluidity by moving a small attractive potential through the 3D cloud. We compare the results with theoretical predictions and achieve quantitative understanding in the BEC regime by performing numerical simulations. Of particular interest is the regime of strong correlations, where no theoretical predictions exist. In the BEC regime, the critical velocity should be closely related to the speed of sound, according to the Landau criterion and Bogolyubov theory. We measure the sound velocity by exciting a density wave and tracking its propagation. The focus of this thesis is on our first experiments on general properties of quasi-2D Fermi gases. We realize strong vertical confinement by generating a 1D optical lattice by intersecting two blue-detuned laser beams under a steep angle. The large resulting lattice spacing enables us to prepare a single planar quantum gas deeply in the 2D regime. The first measurements of the speed of sound in quasi-2D gases in the BEC-BCS crossover are presented. In addition, we present preliminary results on the pressure equation of state, which is extracted from in-situ density profiles. Since the sound velocity is directly connected to the equation of state, the results provide a crosscheck of the speed of sound. Moreover, we benchmark the derived sound from available equation of state predictions, find very good agreement with recent numerical calculations, and disprove a sophisticated mean field approach. These studies are carried out with a novel apparatus which has
GAIA: A 2-D Curvilinear moving grid hydrodynamic code
International Nuclear Information System (INIS)
Jourdren, H.
1987-02-01
The GAIA computer code is developed for time dependent, compressible, multimaterial fluid flow problems, to overcome some drawbacks of traditional 2-D Lagrangian codes. The initial goals of robustness, entropy accuracies, efficiency in presence of large interfacial slip, have already been achieved. The general GODUNOV approach is applied to an arbitrary time varying control-volume formulation. We review in this paper the Riemann solver, the GODUNOV cartesian and curvilinear moving grid schemes and an efficient grid generation algorithm. We finally outline a possible second order accuracy extension
Integer channels in nonuniform non-equilibrium 2D systems
Shikin, V.
2018-01-01
We discuss the non-equilibrium properties of integer channels in nonuniform 2D electron (hole) systems in the presence of a strong magnetic field. The results are applied to a qualitative explanation of the Corbino disk current-voltage characteristics (IVC) in the quantum Hall effect (QHE) regime. Special consideration is paid to the so-called "QHE breakdown" effect, which is readily observed in both the Hall bar and Corbino geometries of the tested cells. The QHE breakdown is especially evident in the Corbino samples, allowing for a more in-depth study of these effects.
Directory of Open Access Journals (Sweden)
Jorge Wilson Cortez
2011-02-01
Full Text Available El objetivo de este trabajo fue evaluar las características agronómicas de la soya sembrada en Sistema de Siembra Directa, en función de las densidades de siembra (15, 16 y 20 plantas por metro y la profundidad de deposición de abono (11, 14 y 17 cm. El experimento fue realizado en el Departamento de Ingeniería Rural, UNESP/Jaboticabal, utilizando, en el delineamiento, parcelas subdivididas en bloques al acaso, con cuatro repeticiones. Características agronómicas de la soya analizadas: número de días de aparición, índice de aparición, porcentaje de daños, altura de plantas, altura de inserción de la primera vaina, vainas por planta, granos por vaina, porcentaje de plantas sobrevivientes y productividad. Los resultados indicaron que el número de días de aparición, índice de aparición y el porcentaje de daños, no fueron influenciados por las densidades y la profundidad de deposición de abono. Los daños por insectos y aves fueron del orden de 30% de plantas atacadas. La altura de plantas, altura de inserción de la primera vaina, vainas por planta y granos por vaina no variaron en relación a la densidad y profundidad de deposición de abono. La productividad de la soya (5.146 kg ha-1 fue semejante en las densidades y profundidades de deposición de abono.
2D arc-PIC code description: methods and documentation
Timko, Helga
2011-01-01
Vacuum discharges are one of the main limiting factors for future linear collider designs such as that of the Compact LInear Collider. To optimize machine efficiency, maintaining the highest feasible accelerating gradient below a certain breakdown rate is desirable; understanding breakdowns can therefore help us to achieve this goal. As a part of ongoing theoretical research on vacuum discharges at the Helsinki Institute of Physics, the build-up of plasma can be investigated through the particle-in-cell method. For this purpose, we have developed the 2D Arc-PIC code introduced here. We present an exhaustive description of the 2D Arc-PIC code in two parts. In the first part, we introduce the particle-in-cell method in general and detail the techniques used in the code. In the second part, we provide a documentation and derivation of the key equations occurring in the code. The code is original work of the author, written in 2010, and is therefore under the copyright of the author. The development of the code h...
2-D Fractal Carpet Antenna Design and Performance
Barton, C. C.; Tebbens, S. F.; Ewing, J. J.; Peterman, D. J.; Rizki, M. M.
2017-12-01
A 2-D fractal carpet antenna uses a fractal (self-similar) pattern to increase its perimeter by iteration and can receive or transmit electromagnetic radiation within its perimeter-bounded surface area. 2-D fractals are shapes that, at their mathematical limit (infinite iterations) have an infinite perimeter bounding a finite surface area. The fractal dimension describes the degree of space filling and lacunarity which quantifies the size and spatial distribution of open space bounded by a fractal shape. A key aspect of fractal antennas lies in iteration (repetition) of a fractal pattern over a range of length scales. Iteration produces fractal antennas that are very compact, wideband and multiband. As the number of iterations increases, the antenna operates at higher and higher frequencies. Manifestly different from traditional antenna designs, a fractal antenna can operate at multiple frequencies simultaneously. We have created a MATLAB code to generate deterministic and stochastic modes of Sierpinski carpet fractal antennas with a range of fractal dimensions between 1 and 2. Variation in fractal dimension, stochasticity, number of iterations, and lacunarities have been computationally tested using COMSOL Multiphysics software to determine their effect on antenna performance
2-D Fractal Wire Antenna Design and Performance
Tebbens, S. F.; Barton, C. C.; Peterman, D. J.; Ewing, J. J.; Abbott, C. S.; Rizki, M. M.
2017-12-01
A 2-D fractal wire antenna uses a fractal (self-similar) pattern to increase its length by iteration and can receive or transmit electromagnetic radiation. 2-D fractals are shapes that, at their mathematical limit (of infinite iterations) have an infinite length. The fractal dimension describes the degree of space filling. A fundamental property of fractal antennas lies in iteration (repetition) of a fractal pattern over a range of length scales. Iteration produces fractal antennas that can be very compact, wideband and multiband. As the number of iterations increases, the antenna tends to have additional frequencies that minimize far field return loss. This differs from traditional antenna designs in that a single fractal antenna can operate well at multiple frequencies. We have created a MATLAB code to generate deterministic and stochastic modes of fractal wire antennas with a range of fractal dimensions between 1 and 2. Variation in fractal dimension, stochasticity, and number of iterations have been computationally tested using COMSOL Multiphysics software to determine their effect on antenna performance.
The unitary conformal field theory behind 2D Asymptotic Safety
Energy Technology Data Exchange (ETDEWEB)
Nink, Andreas; Reuter, Martin [Institute of Physics, PRISMA & MITP, Johannes Gutenberg University Mainz,Staudingerweg 7, D-55099 Mainz (Germany)
2016-02-25
Being interested in the compatibility of Asymptotic Safety with Hilbert space positivity (unitarity), we consider a local truncation of the functional RG flow which describes quantum gravity in d>2 dimensions and construct its limit of exactly two dimensions. We find that in this limit the flow displays a nontrivial fixed point whose effective average action is a non-local functional of the metric. Its pure gravity sector is shown to correspond to a unitary conformal field theory with positive central charge c=25. Representing the fixed point CFT by a Liouville theory in the conformal gauge, we investigate its general properties and their implications for the Asymptotic Safety program. In particular, we discuss its field parametrization dependence and argue that there might exist more than one universality class of metric gravity theories in two dimensions. Furthermore, studying the gravitational dressing in 2D asymptotically safe gravity coupled to conformal matter we uncover a mechanism which leads to a complete quenching of the a priori expected Knizhnik-Polyakov-Zamolodchikov (KPZ) scaling. A possible connection of this prediction to Monte Carlo results obtained in the discrete approach to 2D quantum gravity based upon causal dynamical triangulations is mentioned. Similarities of the fixed point theory to, and differences from, non-critical string theory are also described. On the technical side, we provide a detailed analysis of an intriguing connection between the Einstein-Hilbert action in d>2 dimensions and Polyakov’s induced gravity action in two dimensions.
Preconditioning 2D Integer Data for Fast Convex Hull Computations.
Cadenas, José Oswaldo; Megson, Graham M; Luengo Hendriks, Cris L
2016-01-01
In order to accelerate computing the convex hull on a set of n points, a heuristic procedure is often applied to reduce the number of points to a set of s points, s ≤ n, which also contains the same hull. We present an algorithm to precondition 2D data with integer coordinates bounded by a box of size p × q before building a 2D convex hull, with three distinct advantages. First, we prove that under the condition min(p, q) ≤ n the algorithm executes in time within O(n); second, no explicit sorting of data is required; and third, the reduced set of s points forms a simple polygonal chain and thus can be directly pipelined into an O(n) time convex hull algorithm. This paper empirically evaluates and quantifies the speed up gained by preconditioning a set of points by a method based on the proposed algorithm before using common convex hull algorithms to build the final hull. A speedup factor of at least four is consistently found from experiments on various datasets when the condition min(p, q) ≤ n holds; the smaller the ratio min(p, q)/n is in the dataset, the greater the speedup factor achieved.
Syndrome identification based on 2D analysis software.
Boehringer, Stefan; Vollmar, Tobias; Tasse, Christiane; Wurtz, Rolf P; Gillessen-Kaesbach, Gabriele; Horsthemke, Bernhard; Wieczorek, Dagmar
2006-10-01
Clinical evaluation of children with developmental delay continues to present a challenge to the clinicians. In many cases, the face provides important information to diagnose a condition. However, database support with respect to facial traits is limited at present. Computer-based analyses of 2D and 3D representations of faces have been developed, but it is unclear how well a larger number of conditions can be handled by such systems. We have therefore analysed 2D pictures of patients each being affected with one of 10 syndromes (fragile X syndrome; Cornelia de Lange syndrome; Williams-Beuren syndrome; Prader-Willi syndrome; Mucopolysaccharidosis type III; Cri-du-chat syndrome; Smith-Lemli-Opitz syndrome; Sotos syndrome; Microdeletion 22q11.2; Noonan syndrome). We can show that a classification accuracy of >75% can be achieved for a computer-based diagnosis among the 10 syndromes, which is about the same accuracy achieved for five syndromes in a previous study. Pairwise discrimination of syndromes ranges from 80 to 99%. Furthermore, we can demonstrate that the criteria used by the computer decisions match clinical observations in many cases. These findings indicate that computer-based picture analysis might be a helpful addition to existing database systems, which are meant to assist in syndrome diagnosis, especially as data acquisition is straightforward and involves off-the-shelf digital camera equipment.
Polymer ultrapermeability from the inefficient packing of 2D chains
Rose, Ian; Bezzu, C. Grazia; Carta, Mariolino; Comesaña-Gándara, Bibiana; Lasseuguette, Elsa; Ferrari, M. Chiara; Bernardo, Paola; Clarizia, Gabriele; Fuoco, Alessio; Jansen, Johannes C.; Hart, Kyle E.; Liyana-Arachchi, Thilanga P.; Colina, Coray M.; McKeown, Neil B.
2017-09-01
The promise of ultrapermeable polymers, such as poly(trimethylsilylpropyne) (PTMSP), for reducing the size and increasing the efficiency of membranes for gas separations remains unfulfilled due to their poor selectivity. We report an ultrapermeable polymer of intrinsic microporosity (PIM-TMN-Trip) that is substantially more selective than PTMSP. From molecular simulations and experimental measurement we find that the inefficient packing of the two-dimensional (2D) chains of PIM-TMN-Trip generates a high concentration of both small (Gas permeability data for PIM-TMN-Trip surpass the 2008 Robeson upper bounds for O2/N2, H2/N2, CO2/N2, H2/CH4 and CO2/CH4, with the potential for biogas purification and carbon capture demonstrated for relevant gas mixtures. Comparisons between PIM-TMN-Trip and structurally similar polymers with three-dimensional (3D) contorted chains confirm that its additional intrinsic microporosity is generated from the awkward packing of its 2D polymer chains in a 3D amorphous solid. This strategy of shape-directed packing of chains of microporous polymers may be applied to other rigid polymers for gas separations.
Predicting non-square 2D dice probabilities
Pender, G. A. T.; Uhrin, M.
2014-07-01
The prediction of the final state probabilities of a general cuboid randomly thrown onto a surface is a problem that naturally arises in the minds of men and women familiar with regular cubic dice and the basic concepts of probability. Indeed, it was considered by Newton in 1664 (Newton 1967 The Mathematical Papers of Issac Newton vol I (Cambridge: Cambridge University Press) pp 60-1). In this paper we make progress on the 2D problem (which can be realized in 3D by considering a long cuboid, or alternatively a rectangular cross-sectioned dreidel). For the two-dimensional case we suggest that the ratio of the probabilities of landing on each of the two sides is given by \\frac{\\sqrt{{{k}^{2}}+{{l}^{2}}}-k}{\\sqrt{{{k}^{2}}+{{l}^{2}}}-l}\\frac{arctan \\frac{l}{k}}{arctan \\frac{k}{l}} where k and l are the lengths of the two sides. We test this theory both experimentally and computationally, and find good agreement between our theory, experimental and computational results. Our theory is known, from its derivation, to be an approximation for particularly bouncy or ‘grippy’ surfaces where the die rolls through many revolutions before settling. On real surfaces we would expect (and we observe) that the true probability ratio for a 2D die is a somewhat closer to unity than predicted by our theory. This problem may also have wider relevance in the testing of physics engines.
Joint Secrecy for D2D Communications Underlying Cellular Networks
Hyadi, Amal
2018-01-15
In this work, we investigate the ergodic secrecy rate region of a block-fading spectrum-sharing system, where a D2D communication is underlying a cellular channel. We consider that both the primary and the secondary transmissions require their respective transmitted messages to be kept secret from a common eavesdropper under a joint secrecy constraint. The presented results are for three different scenarios, each corresponding to a particular requirement of the cellular system. First, we consider the case of a fair cellular system, and we show that the impact of jointly securing the transmissions can be balanced between the primary and the secondary systems. The second scenario examines the case when the primary network is demanding and requires the secondary transmission to be at a rate that is decodable by the primary receiver, while the last scenario assumes a joint transmission of artificial noise by the primary and the secondary transmitters. For each scenario, we present an achievable ergodic secrecy rate region that can be used as an indicator for the cellular and the D2D systems to agree under which terms the spectrum will be shared.
DEFF Research Database (Denmark)
Andersen, Thomas Lykke; Brorsen, Michael
This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), Denmark. The starting point for the present report is the previously carried out run-up tests described in Lykke Andersen & Frigaard, 2006. The......-shaped access platforms on piles. The Model tests include mainly regular waves and a few irregular wave tests. These tests have been conducted at Aalborg University from 9. November, 2006 to 17. November, 2006.......This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU), Denmark. The starting point for the present report is the previously carried out run-up tests described in Lykke Andersen & Frigaard, 2006....... The objective of the tests was to investigate the impact pressures generated on a horizontal platform and a cone platform for selected sea states calibrated by Lykke Andersen & Frigaard, 2006. The measurements should be used for assessment of slamming coefficients for the design of horizontal and cone...
New Approach for 2D Readout of GEM Detectors
International Nuclear Information System (INIS)
Hasell, Douglas K.
2011-01-01
Detectors based on Gas Electron Multiplication (GEM) technology are becoming more and more widely used in nuclear and high energy physics and are being applied in astronomy, medical physics, industry, and homeland security. GEM detectors are thin, low mass, insensitive to magnetic fields, and can currently provide position resolutions down to ∼50 microns. However, the designs for reconstructing the position, in two dimensions (2D), of the charged particles striking a GEM detector are often complicated to fabricate and expensive. The objective of this proposal is to investigate a simpler procedure for producing the two dimensional readout layer of GEM detectors using readily available printed circuit board technology which can be tailored to the detector requirements. We will use the established GEM laboratory and facilities at M.I.T. currently employed in developing GEM detectors for the STAR forward tracking upgrade to simplify the testing and evaluation of the new 2D readout designs. If this new design proves successful it will benefit future nuclear and high energy physics experiments already being planned and will similarly extend and simplify the application of GEM technology to other branches of science, medicine, and industry. These benefits would be not only in lower costs for fabrication but also it increased flexibility for design and application.
DNN-state identification of 2D distributed parameter systems
Chairez, I.; Fuentes, R.; Poznyak, A.; Poznyak, T.; Escudero, M.; Viana, L.
2012-02-01
There are many examples in science and engineering which are reduced to a set of partial differential equations (PDEs) through a process of mathematical modelling. Nevertheless there exist many sources of uncertainties around the aforementioned mathematical representation. Moreover, to find exact solutions of those PDEs is not a trivial task especially if the PDE is described in two or more dimensions. It is well known that neural networks can approximate a large set of continuous functions defined on a compact set to an arbitrary accuracy. In this article, a strategy based on the differential neural network (DNN) for the non-parametric identification of a mathematical model described by a class of two-dimensional (2D) PDEs is proposed. The adaptive laws for weights ensure the 'practical stability' of the DNN-trajectories to the parabolic 2D-PDE states. To verify the qualitative behaviour of the suggested methodology, here a non-parametric modelling problem for a distributed parameter plant is analysed.
The Usage of 2D Codes in Marketing Practices
Directory of Open Access Journals (Sweden)
Toni Podmanicki
2011-07-01
Full Text Available Barcodes, which are used for the labelling and identification of products, have been used as the foundation for the development of new symbols, two-dimensional barcodes (usually called 2D codes. These codes are capable of receiving large amounts of data in a small area, and data stored in them can be read by means of mobile devices. They usually contain information such as web addresses, text, contacts and similar data that encourage users to interact in order to obtain the desired information, entertainment, discount, reservation, and even do their shopping. The possibility of connecting the physical and digital world by means of 2D codes has led marketing professionals to face new challenges in the development of strategies in mobile marketing. Many companies recognized the potential of the above technology very early, in its initial phase, and they use it now in their activities. This paper aims to emphasize the importance of knowing this technology and its advantages by providing examples in marketing practices.
International Nuclear Information System (INIS)
Oliphant, T.A.; Morel, J.E.; Gula, W.P.; Pfeufer, G.W.
1997-01-01
The cell-centered diffusion differencing scheme presented by Morel et al. has been applied to magnetic diffusion associated with Lagrangian hydrodynamic codes. Thus, the method applies to non-orthogonal meshes. Although the present application involves structured meshes, the method applies equally well to unstructured meshes. Morel's example of application is to 2D diffusion using Ficke's law. Thus, a volume integral approach is applied to the divergence operator. In 2D magnetic diffusion symmetry allows the use of an area integral approach involving the field components normal to the area, e.g. A-theta and B-theta. Instead of a divergence of a term proportional to the field gradient a curl of a term proportional to the curl of the field is used. An essential fact that allows this procedure is that the solenoidal property of the magnetic field is automatic. In the case of 3D it is necessary to return to the volumetric integral approach and to use rectangular components of the vector potential. Successful benchmarks have been run in comparison with the 1D code RAVEN. A typical example is that of a metal cylinder being compressed by a magnetic field applied at the outer boundary. So far, the 3D diffusion model has been tested in the orthogonal case and found to preserve the linear, homogeneous solution. Results of these and further tests are presented
Soft tubular microfluidics for 2D and 3D applications
Xi, Wang; Kong, Fang; Yeo, Joo Chuan; Yu, Longteng; Sonam, Surabhi; Dao, Ming; Gong, Xiaobo; Teck Lim, Chwee
2017-10-01
Microfluidics has been the key component for many applications, including biomedical devices, chemical processors, microactuators, and even wearable devices. This technology relies on soft lithography fabrication which requires cleanroom facilities. Although popular, this method is expensive and labor-intensive. Furthermore, current conventional microfluidic chips precludes reconfiguration, making reiterations in design very time-consuming and costly. To address these intrinsic drawbacks of microfabrication, we present an alternative solution for the rapid prototyping of microfluidic elements such as microtubes, valves, and pumps. In addition, we demonstrate how microtubes with channels of various lengths and cross-sections can be attached modularly into 2D and 3D microfluidic systems for functional applications. We introduce a facile method of fabricating elastomeric microtubes as the basic building blocks for microfluidic devices. These microtubes are transparent, biocompatible, highly deformable, and customizable to various sizes and cross-sectional geometries. By configuring the microtubes into deterministic geometry, we enable rapid, low-cost formation of microfluidic assemblies without compromising their precision and functionality. We demonstrate configurable 2D and 3D microfluidic systems for applications in different domains. These include microparticle sorting, microdroplet generation, biocatalytic micromotor, triboelectric sensor, and even wearable sensing. Our approach, termed soft tubular microfluidics, provides a simple, cheaper, and faster solution for users lacking proficiency and access to cleanroom facilities to design and rapidly construct microfluidic devices for their various applications and needs.
Magnetic gating of a 2D topological insulator
Dang, Xiaoqian; Burton, J. D.; Tsymbal, Evgeny Y.
2016-09-01
Deterministic control of transport properties through manipulation of spin states is one of the paradigms of spintronics. Topological insulators offer a new playground for exploring interesting spin-dependent phenomena. Here, we consider a ferromagnetic ‘gate’ representing a magnetic adatom coupled to the topologically protected edge state of a two-dimensional (2D) topological insulator to modulate the electron transmission of the edge state. Due to the locked spin and wave vector of the transport electrons the transmission across the magnetic gate depends on the mutual orientation of the adatom magnetic moment and the current. If the Fermi energy matches an exchange-split bound state of the adatom, the electron transmission can be blocked due to the full back scattering of the incident wave. This antiresonance behavior is controlled by the adatom magnetic moment orientation so that the transmission of the edge state can be changed from 1 to 0. Expanding this consideration to a ferromagnetic gate representing a 1D chain of atoms shows a possibility to control the spin-dependent current of a strip of a 2D topological insulator by magnetization orientation of the ferromagnetic gate.
On the resolving power of 2-D interferometry
Energy Technology Data Exchange (ETDEWEB)
Padula, Sandra S. [Instituto de Fisica Teorica (IFT), Sao Paulo, SP (Brazil)
1996-12-31
A resonance gas model previously proposed is here briefly reviewed in order to illustrate some of the geometrical and dynamical effects that could distort the behavior of the two pion correlation function. The main of these effects - the resonance decaying into pions - has earlier been conceived as a possible means to probe resonance abundances at different energy ranges. However, reinforcing previous studies, we show here that the conventional 1-D projection of the correlation function does not allow for clear conclusions. Instead, we propose to use the 2-D projection associated to a 2-D {sub X}{sup 2} analysis, which substantially enhances the resolving power of interferometry to differentiate decoupling geometries of distinct dynamical models. This result is achieved by studying the variation of the mean {sub X}{sup 2} per degrees of freedom with respect to the range of the analysis in the ({sub qT}, {sub qL}) plane. The preliminary E802 data on Si + Au at 14.6 A GeV/c, used here for illustrating the method, seem to rule out dynamical models with high {omega}, {eta} resonance formation yields. (author) 24 refs., 5 figs.
On the resolving power of 2-D interferometry
International Nuclear Information System (INIS)
Padula, Sandra S.
1996-01-01
A resonance gas model previously proposed is here briefly reviewed in order to illustrate some of the geometrical and dynamical effects that could distort the behavior of the two pion correlation function. The main of these effects - the resonance decaying into pions - has earlier been conceived as a possible means to probe resonance abundances at different energy ranges. However, reinforcing previous studies, we show here that the conventional 1-D projection of the correlation function does not allow for clear conclusions. Instead, we propose to use the 2-D projection associated to a 2-D X 2 analysis, which substantially enhances the resolving power of interferometry to differentiate decoupling geometries of distinct dynamical models. This result is achieved by studying the variation of the mean X 2 per degrees of freedom with respect to the range of the analysis in the ( qT , qL ) plane. The preliminary E802 data on Si + Au at 14.6 A GeV/c, used here for illustrating the method, seem to rule out dynamical models with high ω, η resonance formation yields. (author)
2D mesoscale colloidal crystal patterns on polymer substrates
Bredikhin, Vladimir; Bityurin, Nikita
2018-05-01
The development of nanosphere lithography relies on the ability of depositing 2D colloidal crystals comprising micro- and nano-size elements on substrates of different materials. One of the most difficult problems here is deposition of coatings on hydrophobic substrates, e.g. polymers, from aqueous colloidal solutions. We use UV photooxidation for substrate hydrophilization. We demonstrate a new method of producing a two-dimensional ordered array of polymer microparticles (polystyrene microspheres ∼1 μm in diameter) on a polymer substrate (PMMA). We show that implementation of the new deposition technique for directed self-assembly of microspheres on an UV irradiated surface provides an opportunity to obtain coatings on a hydrophilized PMMA surface of large area (∼5 cm2). UV irradiation of the surface through masks allows creating 2D patterns consisting of mesoscale elements formed by the deposited self-assembled microparticles owing to the fact that the colloidal particles are deposited only on the irradiated area leaving the non-irradiated sections intact.
2D magnetic texture analysis of Co-Cu films
International Nuclear Information System (INIS)
Bayirli, Mehmet; Karaagac, Oznur; Kockar, Hakan; Alper, Mursel
2017-01-01
The magnetic textures for the produced magnetic materials are important concepts in accordance with technical applications. Therefore, the aim of this article is to determine 2D magnetic textures of electrodeposited Co-Cu films by the measurement of hysteresis loops at the incremented angles. For that, Co-Cu films were deposited with different Co"2"+ in the electrolyte. In addition, the easy-axis orientation in the films from the squareness values of the angles, M_p(β) obtained by the hysteresis loops have been numerically studied using the Fourier series analysis. The differences observed in the magnetic easy-axis distributions were attributed to changes of the incorporation of Co in the films with the change of Co"2"+ in the electrolyte. The coefficients of Fourier series (A_0 and A_2_n) were also computed for 2D films. It is seen that a systematic and small decrease in A_0 and an obvious decrease in A_2_n (n=1) were observed with increasing incorporated Co in the films. Results imply that interactions cause slightly demagnetization effect accordance with higher incorporation of Co in the films. Furthermore, the crystal structure of the Co-Cu films analysed by X-ray diffraction revealed that the films have dominantly face-centred cubic structure. Film contents analysed by energy-dispersive X-ray spectroscopy and film morphologies observed by scanning electron microscope also support the magnetic texture analysis results found by numerical computation.
Electrically tunable polarizer based on 2D orthorhombic ferrovalley materials
Shen, Xin-Wei; Tong, Wen-Yi; Gong, Shi-Jing; Duan, Chun-Gang
2018-03-01
The concept of ferrovalley materials has been proposed very recently. The existence of spontaneous valley polarization, resulting from ferromagnetism, in such hexagonal 2D materials makes nonvolatile valleytronic applications realizable. Here, we introduce a new member of ferrovalley family with orthorhombic lattice, i.e. monolayer group-IV monochalcogenides (GIVMs), in which the intrinsic valley polarization originates from ferroelectricity, instead of ferromagnetism. Combining the group theory analysis and first-principles calculations, we demonstrate that, different from the valley-selective circular dichroism in hexagonal lattice, linearly polarized optical selectivity for valleys exists in the new type of ferrovalley materials. On account of the distinctive property, a prototype of electrically tunable polarizer is realized. In the ferrovalley-based polarizer, a laser beam can be optionally polarized in x- or y-direction, depending on the ferrovalley state controlled by external electric fields. Such a device can be further optimized to emit circularly polarized radiation with specific chirality and to realize the tunability for operating wavelength. Therefore, we show that 2D orthorhombic ferrovalley materials are the promising candidates to provide an advantageous platform to realize the polarizer driven by electric means, which is of great importance in extending the practical applications of valleytronics.
Modelling RF sources using 2-D PIC codes
Energy Technology Data Exchange (ETDEWEB)
Eppley, K.R.
1993-03-01
In recent years, many types of RF sources have been successfully modelled using 2-D PIC codes. Both cross field devices (magnetrons, cross field amplifiers, etc.) and pencil beam devices (klystrons, gyrotrons, TWT'S, lasertrons, etc.) have been simulated. All these devices involve the interaction of an electron beam with an RF circuit. For many applications, the RF structure may be approximated by an equivalent circuit, which appears in the simulation as a boundary condition on the electric field ( port approximation''). The drive term for the circuit is calculated from the energy transfer between beam and field in the drift space. For some applications it may be necessary to model the actual geometry of the structure, although this is more expensive. One problem not entirely solved is how to accurately model in 2-D the coupling to an external waveguide. Frequently this is approximated by a radial transmission line, but this sometimes yields incorrect results. We also discuss issues in modelling the cathode and injecting the beam into the PIC simulation.
Modelling RF sources using 2-D PIC codes
Energy Technology Data Exchange (ETDEWEB)
Eppley, K.R.
1993-03-01
In recent years, many types of RF sources have been successfully modelled using 2-D PIC codes. Both cross field devices (magnetrons, cross field amplifiers, etc.) and pencil beam devices (klystrons, gyrotrons, TWT`S, lasertrons, etc.) have been simulated. All these devices involve the interaction of an electron beam with an RF circuit. For many applications, the RF structure may be approximated by an equivalent circuit, which appears in the simulation as a boundary condition on the electric field (``port approximation``). The drive term for the circuit is calculated from the energy transfer between beam and field in the drift space. For some applications it may be necessary to model the actual geometry of the structure, although this is more expensive. One problem not entirely solved is how to accurately model in 2-D the coupling to an external waveguide. Frequently this is approximated by a radial transmission line, but this sometimes yields incorrect results. We also discuss issues in modelling the cathode and injecting the beam into the PIC simulation.
Modelling RF sources using 2-D PIC codes
International Nuclear Information System (INIS)
Eppley, K.R.
1993-03-01
In recent years, many types of RF sources have been successfully modelled using 2-D PIC codes. Both cross field devices (magnetrons, cross field amplifiers, etc.) and pencil beam devices (klystrons, gyrotrons, TWT'S, lasertrons, etc.) have been simulated. All these devices involve the interaction of an electron beam with an RF circuit. For many applications, the RF structure may be approximated by an equivalent circuit, which appears in the simulation as a boundary condition on the electric field (''port approximation''). The drive term for the circuit is calculated from the energy transfer between beam and field in the drift space. For some applications it may be necessary to model the actual geometry of the structure, although this is more expensive. One problem not entirely solved is how to accurately model in 2-D the coupling to an external waveguide. Frequently this is approximated by a radial transmission line, but this sometimes yields incorrect results. We also discuss issues in modelling the cathode and injecting the beam into the PIC simulation
2D CFT partition functions at late times
Dyer, Ethan; Gur-Ari, Guy
2017-08-01
We consider the late time behavior of the analytically continued partition function Z( β + it) Z( β - it) in holographic 2 d CFTs. This is a probe of information loss in such theories and in their holographic duals. We show that each Virasoro character decays in time, and so information is not restored at the level of individual characters. We identify a universal decaying contribution at late times, and conjecture that it describes the behavior of generic chaotic 2 d CFTs out to times that are exponentially large in the central charge. It was recently suggested that at sufficiently late times one expects a crossover to random matrix behavior. We estimate an upper bound on the crossover time, which suggests that the decay is followed by a parametrically long period of late time growth. Finally, we discuss gravitationally-motivated integrable theories and show how information is restored at late times by a series of characters. This hints at a possible bulk mechanism, where information is restored by an infinite sum over non-perturbative saddles.
DEFF Research Database (Denmark)
Kobylecki, Camilla J; Jakobsen, Klaus D; Hansen, Thomas
2009-01-01
-state plasma concentrations at a given dose, thus increasing the risk of toxic effects from medication. METHODS: We identified 18 PM patients with a schizophrenia spectrum diagnosis from a clinical database covering all patients who have been analyzed in an ongoing standardized CYP2D6 screening program. Each...... PM patient was carefully matched on age, gender and diagnosis with an intermediate metabolizer (IM) and an extensive metabolizer (EM) from the same database to generate 18 triplets. Clinical data, primarily on side effects of treatment, were obtained from medical records by an experienced research...
Rolla, R; Vidali, M; Meola, S; Pollarolo, P; Fanello, M R; Nicolotti, C; Saggia, C; Forti, L; Agostino, F D; Rossi, V; Borra, G; Stratica, F; Alabiso, O; Bellomo, G
2012-01-01
The side effects of tamoxifen, a drug widely used for the treatment and the prevention of recurrence in patients with estrogen receptor positive breast cancers (ER+), have been reported in clinical trials, but to date no information is available on their possible association with an increased enzymatic activity of CYP2D6 (ultra-metabolizers, UMs). The aim of this study was therefore to evaluate the association between the presence of multiple functional CYP2D6 alleles and the occurrence of side effects. 61 women with ER+ breast cancer receiving tamoxifen monotherapy were investigated in order to assess the relationships between CYP2D6 UM phenotype and side effects. Genotyping of 16 CYP2D6 polymorphisms was performed using a new DNA microarray technology. A highly significant difference was detected (41.2% of difference, 95% CI 6 - 61%, Fisher's exact test, p = 0.030) between the numbers of Ultrarapid Metabolizer patients (UM; high activity) with two or more adverse drug reactions to tamoxifen (7/9; 77.8%), compared to the number of Extensive Metabolizers (EM; normal activity), Intermediate Metabolizers (IM; reduced activity), and Poor Metabolizers (PM; no activity) with at least two side effects (19/52, 36.5%). A similar difference was also observed comparing the two groups (UM vs EM-IM-PM) for the number of side effects (median and inter quartile range, IQR: AM/EM/IM 1, IQR 0-2 vs. ULTRA 2, IQR 2-4; Mann-Whitney p = 0.005). Our results suggest a new association between CYP2D6 gene duplication and side effects to tamoxifen, indicating a possible role of CYP2D6 in their occurrence.
Interactive initialization of 2D/3D rigid registration
International Nuclear Information System (INIS)
Gong, Ren Hui; Güler, Özgür; Kürklüoglu, Mustafa; Lovejoy, John; Yaniv, Ziv
2013-01-01
Purpose: Registration is one of the key technical components in an image-guided navigation system. A large number of 2D/3D registration algorithms have been previously proposed, but have not been able to transition into clinical practice. The authors identify the primary reason for the lack of adoption with the prerequisite for a sufficiently accurate initial transformation, mean target registration error of about 10 mm or less. In this paper, the authors present two interactive initialization approaches that provide the desired accuracy for x-ray/MR and x-ray/CT registration in the operating room setting. Methods: The authors have developed two interactive registration methods based on visual alignment of a preoperative image, MR, or CT to intraoperative x-rays. In the first approach, the operator uses a gesture based interface to align a volume rendering of the preoperative image to multiple x-rays. The second approach uses a tracked tool available as part of a navigation system. Preoperatively, a virtual replica of the tool is positioned next to the anatomical structures visible in the volumetric data. Intraoperatively, the physical tool is positioned in a similar manner and subsequently used to align a volume rendering to the x-ray images using an augmented reality (AR) approach. Both methods were assessed using three publicly available reference data sets for 2D/3D registration evaluation. Results: In the authors' experiments, the authors show that for x-ray/MR registration, the gesture based method resulted in a mean target registration error (mTRE) of 9.3 ± 5.0 mm with an average interaction time of 146.3 ± 73.0 s, and the AR-based method had mTREs of 7.2 ± 3.2 mm with interaction times of 44 ± 32 s. For x-ray/CT registration, the gesture based method resulted in a mTRE of 7.4 ± 5.0 mm with an average interaction time of 132.1 ± 66.4 s, and the AR-based method had mTREs of 8.3 ± 5.0 mm with interaction times of 58 ± 52 s. Conclusions: Based on the
Interactive initialization of 2D/3D rigid registration
Energy Technology Data Exchange (ETDEWEB)
Gong, Ren Hui; Güler, Özgür [The Sheikh Zayed Institute for Pediatric Surgical Innovation, Children' s National Medical Center, Washington, DC 20010 (United States); Kürklüoglu, Mustafa [Department of Cardiac Surgery, Children' s National Medical Center, Washington, DC 20010 (United States); Lovejoy, John [Department of Orthopaedic Surgery and Sports Medicine, Children' s National Medical Center, Washington, DC 20010 (United States); Yaniv, Ziv, E-mail: ZYaniv@childrensnational.org [The Sheikh Zayed Institute for Pediatric Surgical Innovation, Children' s National Medical Center, Washington, DC 20010 and Departments of Pediatrics and Radiology, George Washington University, Washington, DC 20037 (United States)
2013-12-15
Purpose: Registration is one of the key technical components in an image-guided navigation system. A large number of 2D/3D registration algorithms have been previously proposed, but have not been able to transition into clinical practice. The authors identify the primary reason for the lack of adoption with the prerequisite for a sufficiently accurate initial transformation, mean target registration error of about 10 mm or less. In this paper, the authors present two interactive initialization approaches that provide the desired accuracy for x-ray/MR and x-ray/CT registration in the operating room setting. Methods: The authors have developed two interactive registration methods based on visual alignment of a preoperative image, MR, or CT to intraoperative x-rays. In the first approach, the operator uses a gesture based interface to align a volume rendering of the preoperative image to multiple x-rays. The second approach uses a tracked tool available as part of a navigation system. Preoperatively, a virtual replica of the tool is positioned next to the anatomical structures visible in the volumetric data. Intraoperatively, the physical tool is positioned in a similar manner and subsequently used to align a volume rendering to the x-ray images using an augmented reality (AR) approach. Both methods were assessed using three publicly available reference data sets for 2D/3D registration evaluation. Results: In the authors' experiments, the authors show that for x-ray/MR registration, the gesture based method resulted in a mean target registration error (mTRE) of 9.3 ± 5.0 mm with an average interaction time of 146.3 ± 73.0 s, and the AR-based method had mTREs of 7.2 ± 3.2 mm with interaction times of 44 ± 32 s. For x-ray/CT registration, the gesture based method resulted in a mTRE of 7.4 ± 5.0 mm with an average interaction time of 132.1 ± 66.4 s, and the AR-based method had mTREs of 8.3 ± 5.0 mm with interaction times of 58 ± 52 s. Conclusions: Based on
The Role of screening in the strongly correlated 2D systems
Hwang, E H
2003-01-01
We investigate recently observed experiments in the strongly correlated 2D systems (r sub s >> 1) (low-density 2D plasmons, metallic behaviour of 2D systems and frictional drag resistivity between two 2D hole layers). We compare them with our theoretical results calculated within a conventional Fermi liquid theory with RPA screening.
Cutting an NKG2D Ligand Short: Cellular Processing of the Peculiar Human NKG2D Ligand ULBP4
Directory of Open Access Journals (Sweden)
Tobias Zöller
2018-03-01
Full Text Available Stress-induced cell surface expression of MHC class I-related glycoproteins of the MIC and ULBP families allows for immune recognition of dangerous “self cells” by human cytotoxic lymphocytes via the NKG2D receptor. With two MIC molecules (MICA and MICB and six ULBP molecules (ULBP1–6, there are a total of eight human NKG2D ligands (NKG2DL. Since the discovery of the NKG2D–NKG2DL system, the cause for both redundancy and diversity of NKG2DL has been a major and ongoing matter of debate. NKG2DL diversity has been attributed, among others, to the selective pressure by viral immunoevasins, to diverse regulation of expression, to differential tissue expression as well as to variations in receptor interactions. Here, we critically review the current state of knowledge on the poorly studied human NKG2DL ULBP4. Summarizing available facts and previous studies, we picture ULBP4 as a peculiar ULBP family member distinct from other ULBP family members by various aspects. In addition, we provide novel experimental evidence suggesting that cellular processing gives rise to mature ULBP4 glycoproteins different to previous reports. Finally, we report on the proteolytic release of soluble ULBP4 and discuss these results in the light of known mechanisms for generation of soluble NKG2DL.
Magnetoresistance in Co/2D MoS2/Co and Ni/2D MoS2/Ni junctions.
Zhang, Han; Ye, Meng; Wang, Yangyang; Quhe, Ruge; Pan, Yuanyuan; Guo, Ying; Song, Zhigang; Yang, Jinbo; Guo, Wanlin; Lu, Jing
2016-06-28
Semiconducting single-layer (SL) and few-layer MoS2 have a flat surface, free of dangling bonds. Using density functional theory coupled with non-equilibrium Green's function method, we investigate the spin-polarized transport properties of Co/2D MoS2/Co and Ni/2D MoS2/Ni junctions with MoS2 layer numbers of N = 1, 3, and 5. Well-defined interfaces are formed between MoS2 and metal electrodes. The junctions with a SL MoS2 spacer are almost metallic owing to the strong coupling between MoS2 and the ferromagnets, while those are tunneling with a few layer MoS2 spacer. Both large magnetoresistance and tunneling magnetoresistance are found when fcc or hcp Co is used as an electrode. Therefore, flat single- and few-layer MoS2 can serve as an effective nonmagnetic spacer in a magnetoresistance or tunneling magnetoresistance device with a well-defined interface.
Optical diffraction by ordered 2D arrays of silica microspheres
International Nuclear Information System (INIS)
Shcherbakov, A.A.; Shavdina, O.; Tishchenko, A.V.; Veillas, C.; Verrier, I.; Dellea, O.; Jourlin, Y.
2017-01-01
The article presents experimental and theoretical studies of angular dependent diffraction properties of 2D monolayer arrays of silica microspheres. High-quality large area defect-free monolayers of 1 μm diameter silica microspheres were deposited by the Langmuir-Blodgett technique under an accurate optical control. Measured angular dependencies of zeroth and one of the first order diffraction efficiencies produced by deposited samples were simulated by the rigorous Generalized Source Method taking into account particle size dispersion and lattice nonideality. - Highlights: • High quality silica microsphere monolayer was fabricated. • Accurate measurements of diffraction efficiency angular dependencies. • Rigorous diffraction simulation of both ideal hexagonal and realistic microsphere arrangements. • Qualitative rationalization of the obtained results and the observed differences between the experiment and the theory.
Persistent spin helices in 2D electron systems
Kozulin, A. S.; Malyshev, A. I.; Konakov, A. A.
2017-03-01
We present a theoretical investigation of persistent spin helices in two-dimensional electron systems with spin-orbit coupling. For this purpose, we consider a single-particle effective mass Hamiltonian with a generalized linear-in- k spin-orbit coupling term corresponding to a quantum well grown in an arbitrary crystallographic direction, and derive the general condition for the formation of the persistent spin helix. This condition applied for the Hamiltonians describing quantum wells with different growth directions indicates the possibility of existence of the persistent spin helix in a wide class of 2D systems apart from the [001] model with equal Rashba and Dresselhaus spin-orbit coupling strengths and the [110] Dresselhaus model.
2D supergravity and its connection to integrable models
International Nuclear Information System (INIS)
Arnaudov, L.N.; Prodanov, E.M.; Rashkov, R.C.
1993-05-01
In the recent work two different approaches for obtaining the covariant W 2 -action of 2-d quantum supergravity are considered. The first one is based on Hamiltonian reduction of flat Osp(2/1) connection in holomorphic polarization. Adding extra degrees of freedom with the help of gauging procedure the W 2 -action and the superconformal identities are obtained. It is shown that the super Virasoro transformations preserve the form of the Lax connection and therefore are symmetries of the sKdV equations. In the second approach starting with Chern-Simons theory and using non-canonical polarization the zero-curvature condition entails the same results. (author). 7 refs
2D quantum gravity at three loops: A counterterm investigation
Directory of Open Access Journals (Sweden)
Lætitia Leduc
2016-02-01
Full Text Available We analyze the divergences of the three-loop partition function at fixed area in 2D quantum gravity. Considering the Liouville action in the Kähler formalism, we extract the coefficient of the leading divergence ∼AΛ2(lnAΛ22. This coefficient is non-vanishing. We discuss the counterterms one can and must add and compute their precise contribution to the partition function. This allows us to conclude that every local and non-local divergence in the partition function can be balanced by local counterterms, with the only exception of the maximally non-local divergence (lnAΛ23. Yet, this latter is computed and does cancel between the different three-loop diagrams. Thus, requiring locality of the counterterms is enough to renormalize the partition function. Finally, the structure of the new counterterms strongly suggests that they can be understood as a renormalization of the measure action.
Electronic Properties of Curved and Defective 2-D BN Nanostructures
Beach, Kory; Terrones, Humberto; Raeliarijaona, Aldo; Siegel, Ross; Florio, Fred
Density functional theory (DFT) with local density approximation (LDA) pseudopotentials is used to calculate the band structure and density of states of various novel 2-D BN nanostructures. Three types of systems are studied: Schwarzites, a Haeckelite, and an h-BN monolayer. Schwarzites are negatively curved structures in which the curvature is due to the introduction of octagonal rings of alternating boron and nitrogen atoms. In particular, three families of Schwarzites are analyzed: P, G and IWP. The Haeckelites on the other hand, are flat layers composed of squares and octagons of BN. It is found that all these BN allotropes are metastable in which the band gap is direct and smaller than the most stable system, h-BN. National Science Foundation (EFRI-1433311).
Solution structure of d-GAATTCGAATTC by 2D NMR
International Nuclear Information System (INIS)
Hosur, R.V.; Ravikumar, M.; Chary, K.V.R.; Sheth, A.; Govil, G.
1986-01-01
A new approach based on the correlated spectroscopy (COSY) in 2D NMR has been described for determination of sugar geometries in oligonucleotides. Under the usual low resolution conditions employed in COSY, the intensities of cross peaks depend on the magnitudes of coupling constants. There are five vicinal coupling constants in a deoxyribose ring which are sensitive to the sugar geometry. The presence, absence and rough comparison of relative intensities of COSY cross peaks arising from such coupling constants enable one to fix the sugar conformation to a fair degree of precision. The methodology has been applied to d-GAATTCGAATTC. It is observed that ten out of the twelve nucleotide units in this sequence exhibit a rare O1'-endo geometry. The EcoRI cleavage sites in the dodecanucleotide show an interesting variation in the conformation with the two sugars attached to the Gs acquiring a geometry between C2'-endo and C4'-endo. (Auth.)
Automated Motion Estimation for 2D Cine DENSE MRI
Gilliam, Andrew D.; Epstein, Frederick H.
2013-01-01
Cine displacement encoding with stimulated echoes (DENSE) is a magnetic resonance (MR) method that directly encodes tissue displacement into MR phase images. This technique has successfully interrogated many forms of tissue motion, but is most commonly used to evaluate cardiac mechanics. Currently, motion analysis from cine DENSE images requires manually delineated anatomical structures. An automated analysis would improve measurement throughput, simplify data interpretation, and potentially access important physiological information during the MR exam. In this article, we present the first fully automated solution for the estimation of tissue motion and strain from 2D cine DENSE data. Results using both simulated and human cardiac cine DENSE data indicate good agreement between the automated algorithm and the standard semi-manual analysis method. PMID:22575669
A reusable OSL-film for 2D radiotherapy dosimetry
Wouter, Crijns; Dirk, Vandenbroucke; Paul, Leblans; Tom, Depuydt
2017-11-01
Optical stimulated luminescence (OSL) combines reusability, sub-mm resolution, and a linear dose response in a single radiation detection technology. Such a combination is currently lacking in radiotherapy dosimetry. But OSL-films have a strong energy dependent response to keV photons due to a relative high effective atomic number (Z eff). The current work studied the applicability of a 2D OSL-film with a reduced Z eff as (IMRT/VMAT) dosimeter. Based on their commercial OSL-film experience, Agfa Healthcare N.V. produced a new experimental OSL-film for RT dosimetry. This film had a lower effective atomic number compared to the films used in radiology. Typical 2D dosimeter requirements such as uniformity, dose response, signal stability with time, and angular dependence were evaluated. Additionally, the impact of a possible residual energy dependence was assessed for the infield as well as the out-of-field region of both static beams and standard intensity modulated patterns (chair and pyramid). The OSL-film’s reusable nature allowed for a film specific absolute and linear calibration including a flood-field uniformity correction. The OSL-film was scanned with a CR-15X engine based reader using a strict timing (i.e. 4 min after ‘beam on’ or as soon as possible) to account for spontaneous recombination. The OSL-film had good basic response properties: non-uniformities ⩽2.6%, a linear dose response (0-32 Gy), a linear signal decay (0.5% min-1) over the 20 min measured, and limited angular dependence ⩽2.6%. Due to variations of the energy spectrum, larger dose differences were noted outside the central region of the homogenous phantom and outside both static and IMRT fields. However, the OSL-film’s measured dose differences of the IMRT patterns were lower than those of Gafchromic EBT measurements ([-1.6%, 2.1%] versus [-2.9%, 3.6%]). The current OSL-film could be used as a reusable high resolution dosimeter with read-out immediately after
Aerodynamic shape optimization of Airfoils in 2-D incompressible flow
Rangasamy, Srinivethan; Upadhyay, Harshal; Somasekaran, Sandeep; Raghunath, Sreekanth
2010-11-01
An optimization framework was developed for maximizing the region of 2-D airfoil immersed in laminar flow with enhanced aerodynamic performance. It uses genetic algorithm over a population of 125, across 1000 generations, to optimize the airfoil. On a stand-alone computer, a run takes about an hour to obtain a converged solution. The airfoil geometry was generated using two Bezier curves; one to represent the thickness and the other the camber of the airfoil. The airfoil profile was generated by adding and subtracting the thickness curve from the camber curve. The coefficient of lift and drag was computed using potential velocity distribution obtained from panel code, and boundary layer transition prediction code was used to predict the location of onset of transition. The objective function of a particular design is evaluated as the weighted-average of aerodynamic characteristics at various angles of attacks. Optimization was carried out for several objective functions and the airfoil designs obtained were analyzed.
Charge Transport in 2D DNA Tunnel Junction Diodes
Yoon, Minho
2017-11-06
Recently, deoxyribonucleic acid (DNA) is studied for electronics due to its intrinsic benefits such as its natural plenitude, biodegradability, biofunctionality, and low-cost. However, its applications are limited to passive components because of inherent insulating properties. In this report, a metal-insulator-metal tunnel diode with Au/DNA/NiOx junctions is presented. Through the self-aligning process of DNA molecules, a 2D DNA nanosheet is synthesized and used as a tunneling barrier, and semitransparent conducting oxide (NiOx ) is applied as a top electrode for resolving metal penetration issues. This molecular device successfully operates as a nonresonant tunneling diode, and temperature-variable current-voltage analysis proves that Fowler-Nordheim tunneling is a dominant conduction mechanism at the junctions. DNA-based tunneling devices appear to be promising prototypes for nanoelectronics using biomolecules.
Thermodynamics of the localized D2-D6 system
International Nuclear Information System (INIS)
Gomez-Reino, Marta; Naculich, Stephen G.; Schnitzer, Howard J.
2005-01-01
An exact fully-localized extremal supergravity solution for N 2 D2-branes and N 6 D6-branes, which is dual to 3-dimensional supersymmetric SU(N 2 ) gauge theory with N 6 fundamentals, was found by Cherkis and Hashimoto. In order to consider the thermal properties of the gauge theory we present the non-extremal extension of this solution to first order in an expansion near the core of the D6-branes. We compute the Hawking temperature and the black-brane horizon area/entropy. The leading-order entropy, which is proportional to N 2 3/2 N 6 1/2 T H 2 , is not corrected to first order in the expansion. This result is consistent with the analogous weak-coupling result at the correspondence point N 2 similar to N 6
2-D tomography with bolometry in DIII-D
International Nuclear Information System (INIS)
Leonard, A.W.; Meyer, W.H.; Geer, B.; Behne, D.M.; Hill, D.N.
1994-07-01
We have installed a 48-channel platinum-foil bolometer system on DIII-D achieve better spatial and temporal resolution of the radiated power in diverted discharges. Two 24-channel arrays provide complete plasma coverage with optimized views of the divertor. We have measured the divertor radiation profile for a series of radiative divertor and power balance experiments. We observe a rapid change in the magnitude and distribution of divertor radiation with heavy gas puffing. Unfolding the radiation profile with only two views requires us to treat the core and divertor radiation separately. The core radiation is fitted to a function of magnetic flux and is then subtracted from the divertor viewing chords. The divertor profile is then fit to a 2-D spline as a function of magnetic flux and poloidal angle
DEFF Research Database (Denmark)
Andersen, Thomas Lykke; Frigaard, Peter
This report present the results of 2D physical model tests carried out in the shallow wave flume at Dept. of Civil Engineering, Aalborg University (AAU). The objective of the tests was: To investigate the combined influence of the pile diameter to water depth ratio and the wave height to water...... depth ratio on wave run-up of piles. The measurements should be used to design access platforms on piles. The Model tests include: Calibration of regular and irregular sea states at the location of the pile (without structure in place). Measurement of wave run-up for the calibrated sea states...... on the front side of the pile (0 to 90 degrees). These tests have been conducted at Aalborg University from 9. October, 2006 to 8. November, 2006. Unless otherwise mentioned, all values given in this report are in model scale....
The seismic analyzer: interpreting and illustrating 2D seismic data.
Patel, Daniel; Giertsen, Christopher; Thurmond, John; Gjelberg, John; Gröller, M Eduard
2008-01-01
We present a toolbox for quickly interpreting and illustrating 2D slices of seismic volumetric reflection data. Searching for oil and gas involves creating a structural overview of seismic reflection data to identify hydrocarbon reservoirs. We improve the search of seismic structures by precalculating the horizon structures of the seismic data prior to interpretation. We improve the annotation of seismic structures by applying novel illustrative rendering algorithms tailored to seismic data, such as deformed texturing and line and texture transfer functions. The illustrative rendering results in multi-attribute and scale invariant visualizations where features are represented clearly in both highly zoomed in and zoomed out views. Thumbnail views in combination with interactive appearance control allows for a quick overview of the data before detailed interpretation takes place. These techniques help reduce the work of seismic illustrators and interpreters.
Izrada 2D video igre za iOS platformu
Kampuš, Dominik
2016-01-01
Tema ovog završnog rada temelji se na izradi 2D video igre za iOS mobilni uređaj te njezinoj demonstraciji na istom. Kroz rad su opisane sve bitne funkcije GameSalad Creator-a koje su potrebne kod izrade igre bazirane na 2 dimenzije. Također se prolazi kroz iOS operativni sustav, što je on i kako se razvijao. Spominje se i tema koja govori općenito o igrama na mobilnim uređajima. U završnom dijelu rada prikazan je postupak izrade, koje funkcije programa se točno koriste i kako se igra može te...
Symmetries of the 2D magnetic particle imaging system matrix
International Nuclear Information System (INIS)
Weber, A; Knopp, T
2015-01-01
In magnetic particle imaging (MPI), the relation between the particle distribution and the measurement signal can be described by a linear system of equations. For 1D imaging, it can be shown that the system matrix can be expressed as a product of a convolution matrix and a Chebyshev transformation matrix. For multidimensional imaging, the structure of the MPI system matrix is not yet fully explored as the sampling trajectory complicates the physical model. It has been experimentally found that the MPI system matrix rows have symmetries and look similar to the tensor products of Chebyshev polynomials. In this work we will mathematically prove that the 2D MPI system matrix has symmetries that can be used for matrix compression. (paper)
First investigation of a novel 2D position-sensitive
Bassignana, D; Jaramillo, R; Lozano, M; Munoz, F J; Pellegrini, G; Quirion, D; Vila, I
2012-01-01
This paper presents a first study of the performance of a novel 2D position-sensitive microstrip detector, where the resistive charge division method was implemented by replacing the metallic electrodes with resistive electrodes made of polycrystalline silicon. A characterization of two proof-of-concept prototypes with different values of the electrode resistivity was carried out using a pulsed Near Infra-Red laser. The experimental data were compared with the electrical simulation of the sensor equivalent circuit coupled to simple electronics readout circuits. The good agreement between experimental and simulation results establishes the soundness of resistive charge division method in silicon microstrip sensors and validates the developed simulation as a tool for the optimization of future sensor prototypes. Spatial resolution in the strip length direction depends on the ionizing event position. The average value obtained from the protype analysis is close to 1.2% of the strip length for a 6 MIP signal.
2D-RBUC for efficient parallel compression of residuals
Đurđević, Đorđe M.; Tartalja, Igor I.
2018-02-01
In this paper, we present a method for lossless compression of residuals with an efficient SIMD parallel decompression. The residuals originate from lossy or near lossless compression of height fields, which are commonly used to represent models of terrains. The algorithm is founded on the existing RBUC method for compression of non-uniform data sources. We have adapted the method to capture 2D spatial locality of height fields, and developed the data decompression algorithm for modern GPU architectures already present even in home computers. In combination with the point-level SIMD-parallel lossless/lossy high field compression method HFPaC, characterized by fast progressive decompression and seamlessly reconstructed surface, the newly proposed method trades off small efficiency degradation for a non negligible compression ratio (measured up to 91%) benefit.
Currency verification by a 2D infrared barcode
International Nuclear Information System (INIS)
Schirripa Spagnolo, Giuseppe; Cozzella, Lorenzo; Simonetti, Carla
2010-01-01
Nowadays all the National Central Banks are continuously studying innovative anti-counterfeiting systems for banknotes. In this note, an innovative solution is proposed, which combines the potentiality of a hylemetric approach (methodology conceptually similar to biometry), based on notes' intrinsic characteristics, with a well-known and consolidated 2D barcode identification system. In particular, in this note we propose to extract from the banknotes a univocal binary control sequence (template) and insert an encrypted version of it in a barcode printed on the same banknote. For a more acceptable look and feel of a banknote, the superposed barcode can be stamped using IR ink that is visible to near-IR image sensors. This makes the banknote verification simpler. (technical design note)
Quality control in PET systems employing 2-D modular detectors
International Nuclear Information System (INIS)
Daghighian, F.; Hoffman, E.J.; Huang, S.C.
1989-01-01
Many new PET scanner designs employ 2-D detector modules to cost effectively achieve higher image and axial resolution. These systems are potentially less stable than older designs and the loss of a single photomultiplier can disable a large section of a multislice PET system. Because of these factors, it is now necessary to develop more sophisticated quality control procedures that are designed to detect problems as early as possible. The authors have developed and put into operation three automated quality control procedure that are designed to detect problems quickly with a minimum effort on the part of the user. These tests check: (1) stability of the detector modules in terms of efficiency, (2) resolution and its uniformity, (3) the reproducibility of the data
Advecting Procedural Textures for 2D Flow Animation
Kao, David; Pang, Alex; Moran, Pat (Technical Monitor)
2001-01-01
This paper proposes the use of specially generated 3D procedural textures for visualizing steady state 2D flow fields. We use the flow field to advect and animate the texture over time. However, using standard texture advection techniques and arbitrary textures will introduce some undesirable effects such as: (a) expanding texture from a critical source point, (b) streaking pattern from the boundary of the flowfield, (c) crowding of advected textures near an attracting spiral or sink, and (d) absent or lack of textures in some regions of the flow. This paper proposes a number of strategies to solve these problems. We demonstrate how the technique works using both synthetic data and computational fluid dynamics data.
2D discontinuous piecewise linear map: Emergence of fashion cycles.
Gardini, L; Sushko, I; Matsuyama, K
2018-05-01
We consider a discrete-time version of the continuous-time fashion cycle model introduced in Matsuyama, 1992. Its dynamics are defined by a 2D discontinuous piecewise linear map depending on three parameters. In the parameter space of the map periodicity, regions associated with attracting cycles of different periods are organized in the period adding and period incrementing bifurcation structures. The boundaries of all the periodicity regions related to border collision bifurcations are obtained analytically in explicit form. We show the existence of several partially overlapping period incrementing structures, that is, a novelty for the considered class of maps. Moreover, we show that if the time-delay in the discrete time formulation of the model shrinks to zero, the number of period incrementing structures tends to infinity and the dynamics of the discrete time fashion cycle model converges to those of continuous-time fashion cycle model.
Relativistic energy-dispersion relations of 2D rectangular lattices
Ata, Engin; Demirhan, Doğan; Büyükkılıç, Fevzi
2017-04-01
An exactly solvable relativistic approach based on inseparable periodic well potentials is developed to obtain energy-dispersion relations of spin states of a single-electron in two-dimensional (2D) rectangular lattices. Commutation of axes transfer matrices is exploited to find energy dependencies of the wave vector components. From the trace of the lattice transfer matrix, energy-dispersion relations of conductance and valence states are obtained in transcendental form. Graphical solutions of relativistic and nonrelativistic transcendental energy-dispersion relations are plotted to compare how lattice parameters V0, core and interstitial size of the rectangular lattice affects to the energy-band structures in a situation core and interstitial diagonals are of equal slope.
TRANSITION FROM 2D TO 3D WITH GEOGEBRA
Directory of Open Access Journals (Sweden)
MARIA MIHAILOVA
2014-12-01
Full Text Available This article presents the definition of projection plane, its importance for the geometry constructions used in civil engineering and comparative analysis of three opportunities for creating a three dimensional basis, used in drawing such a plane. First method consists of transforming affine and orthonormal coordinates and its application in GeoGebra is presented. Second method, using combination of spherical and polar coordinates in space, is introduced. The third suggested method is an application of descriptive geometry for transforming 2D to 3D and a new method of forming a plane of projection, which will be used later in the reviewed example below. The example shows how GeoGebra software can be used in technical drawing used in civil engineering.
An improved multicrystal 2-D BGO detector for PET
International Nuclear Information System (INIS)
Rogers, J.G.; Taylor, A.J.; Rahimi, M.F.; Nutt, R.; Andreaco, M.; Williams, C.W.
1992-01-01
In this paper, the authors evaluate and compare two new 2-D array detectors for PET. Both consist of an 8 x 8 array of small BGO crystals coupled to a 2 x 2 array of photomultiplier tubes. The depth of the crystals is 3 cm in one detector and 2 cm in the other. The 2 cm detector is obviously superior in terms of material costs, but is also superior in energy resolution per crystal, and in its ability to clearly identify the crystal containing the primary interaction. The authors present a flexible and robust algorithm for crystal identification in such array detectors. The prospect of obtaining still better spatial resolution from such block detectors, with increased numbers of crystals, is discussed
Charge Transport in 2D DNA Tunnel Junction Diodes
Yoon, Minho; Min, Sung-Wook; Dugasani, Sreekantha Reddy; Lee, Yong Uk; Oh, Min Suk; Anthopoulos, Thomas D.; Park, Sung Ha; Im, Seongil
2017-01-01
Recently, deoxyribonucleic acid (DNA) is studied for electronics due to its intrinsic benefits such as its natural plenitude, biodegradability, biofunctionality, and low-cost. However, its applications are limited to passive components because of inherent insulating properties. In this report, a metal-insulator-metal tunnel diode with Au/DNA/NiOx junctions is presented. Through the self-aligning process of DNA molecules, a 2D DNA nanosheet is synthesized and used as a tunneling barrier, and semitransparent conducting oxide (NiOx ) is applied as a top electrode for resolving metal penetration issues. This molecular device successfully operates as a nonresonant tunneling diode, and temperature-variable current-voltage analysis proves that Fowler-Nordheim tunneling is a dominant conduction mechanism at the junctions. DNA-based tunneling devices appear to be promising prototypes for nanoelectronics using biomolecules.
2D magnetic texture analysis of Co-Cu films
Energy Technology Data Exchange (ETDEWEB)
Bayirli, Mehmet; Karaagac, Oznur; Kockar, Hakan [Balikesir Univ. (Turkey). Physics Dept.; Alper, Mursel [Uludag Univ., Bursa (Turkey). Physics Dept.
2017-08-01
The magnetic textures for the produced magnetic materials are important concepts in accordance with technical applications. Therefore, the aim of this article is to determine 2D magnetic textures of electrodeposited Co-Cu films by the measurement of hysteresis loops at the incremented angles. For that, Co-Cu films were deposited with different Co{sup 2+} in the electrolyte. In addition, the easy-axis orientation in the films from the squareness values of the angles, M{sub p}(β) obtained by the hysteresis loops have been numerically studied using the Fourier series analysis. The differences observed in the magnetic easy-axis distributions were attributed to changes of the incorporation of Co in the films with the change of Co{sup 2+} in the electrolyte. The coefficients of Fourier series (A{sub 0} and A{sub 2n}) were also computed for 2D films. It is seen that a systematic and small decrease in A{sub 0} and an obvious decrease in A{sub 2n} (n=1) were observed with increasing incorporated Co in the films. Results imply that interactions cause slightly demagnetization effect accordance with higher incorporation of Co in the films. Furthermore, the crystal structure of the Co-Cu films analysed by X-ray diffraction revealed that the films have dominantly face-centred cubic structure. Film contents analysed by energy-dispersive X-ray spectroscopy and film morphologies observed by scanning electron microscope also support the magnetic texture analysis results found by numerical computation.
2D Quantum Mechanical Study of Nanoscale MOSFETs
Svizhenko, Alexei; Anantram, M. P.; Govindan, T. R.; Biegel, B.; Kwak, Dochan (Technical Monitor)
2000-01-01
With the onset of quantum confinement in the inversion layer in nanoscale MOSFETs, behavior of the resonant level inevitably determines all device characteristics. While most classical device simulators take quantization into account in some simplified manner, the important details of electrostatics are missing. Our work addresses this shortcoming and provides: (a) a framework to quantitatively explore device physics issues such as the source-drain and gate leakage currents, DIBL, and threshold voltage shift due to quantization, and b) a means of benchmarking quantum corrections to semiclassical models (such as density-gradient and quantum-corrected MEDICI). We have developed physical approximations and computer code capable of realistically simulating 2-D nanoscale transistors, using the non-equilibrium Green's function (NEGF) method. This is the most accurate full quantum model yet applied to 2-D device simulation. Open boundary conditions and oxide tunneling are treated on an equal footing. Electrons in the ellipsoids of the conduction band are treated within the anisotropic effective mass approximation. We present the results of our simulations of MIT 25, 50 and 90 nm "well-tempered" MOSFETs and compare them to those of classical and quantum corrected models. The important feature of quantum model is smaller slope of Id-Vg curve and consequently higher threshold voltage. Surprisingly, the self-consistent potential profile shows lower injection barrier in the channel in quantum case. These results are qualitatively consistent with ID Schroedinger-Poisson calculations. The effect of gate length on gate-oxide leakage and subthreshold current has been studied. The shorter gate length device has an order of magnitude smaller current at zero gate bias than the longer gate length device without a significant trade-off in on-current. This should be a device design consideration.
Cell Migration in 1D and 2D Nanofiber Microenvironments.
Estabridis, Horacio M; Jana, Aniket; Nain, Amrinder; Odde, David J
2018-03-01
Understanding how cells migrate in fibrous environments is important in wound healing, immune function, and cancer progression. A key question is how fiber orientation and network geometry influence cell movement. Here we describe a quantitative, modeling-based approach toward identifying the mechanisms by which cells migrate in fibrous geometries having well controlled orientation. Specifically, U251 glioblastoma cells were seeded onto non-electrospinning Spinneret based tunable engineering parameters fiber substrates that consist of networks of suspended 400 nm diameter nanofibers. Cells were classified based on the local fiber geometry and cell migration dynamics observed by light microscopy. Cells were found in three distinct geometries: adhering two a single fiber, adhering to two parallel fibers, and adhering to a network of orthogonal fibers. Cells adhering to a single fiber or two parallel fibers can only move in one dimension along the fiber axis, whereas cells on a network of orthogonal fibers can move in two dimensions. We found that cells move faster and more persistently in 1D geometries than in 2D, with cell migration being faster on parallel fibers than on single fibers. To explain these behaviors mechanistically, we simulated cell migration in the three different geometries using a motor-clutch based model for cell traction forces. Using nearly identical parameter sets for each of the three cases, we found that the simulated cells naturally replicated the reduced migration in 2D relative to 1D geometries. In addition, the modestly faster 1D migration on parallel fibers relative to single fibers was captured using a correspondingly modest increase in the number of clutches to reflect increased surface area of adhesion on parallel fibers. Overall, the integrated modeling and experimental analysis shows that cell migration in response to varying fibrous geometries can be explained by a simple mechanical readout of geometry via a motor-clutch mechanism.
2D Dust Clusters in Theory and Experiments
International Nuclear Information System (INIS)
Tsytovich, V.N.; Gousein-zade, N.G.; Morfill, G.E.
2005-01-01
The theory is applied for more detail analysis of existing experiments of 2D dust clusters with parabolic confinement. It is shown that the equilibrium condition and the frequency of one of the modes of the cluster determines all dimensionless parameters of the cluster allowing to predict the value of other modes and compare them with existing experimental data. This comparison depends on the shielding model, the calculations starting with N = 4 cluster breathing mode predict for Debye shielding model without attraction the frequency of the antisymmetric mode in disagreement with the observed value about 6 standard deviations, while the same calculations for the non-linear screening model gives disagreement about 1 standard deviation. Including the attraction provides an agrement with observations only for non-linear screening model showing the sensitivity of cluster structure to dust attraction. The value of the obtained attractions coefficient is in reasonable agreement with the theoretically expected value. It is shown theoretically that in absence of external parabolic confinement a weak shadow attraction can provide an existence of equilibria for 2D clusters. The equilibrium radius is rapidly decreasing with an increase of the attraction coefficient and with number of grains N in a cluster. The energies of one shell clusters with different N and the energies of N - 1 grain clusters with additional grain in the center of the shell are calculated as functions of attraction coefficient. It is demonstrated that a dissociation of cluster in several smaller clusters needs less energy than a removal of one grain from the cluster. The calculations were performed for Yukawa screening and for non-linear screening and demonstrate the sensitivity of cluster structures to the screening. Frequencies of all modes are calculated up to N = 7 for one shell structure. Stable and unstable modes as well as universal magic numbers are found
Comparison of 2D and 3D Experiments for IVR
Energy Technology Data Exchange (ETDEWEB)
Park, Hae Kyun; Kim, Su Hyeon; Chung Bum Jin [Kyunghee University, Yongin (Korea, Republic of)
2016-05-15
The integrity of reactor vessel is one of the prime concern in a severe accident condition. When the InVessel core melts Retention by External Reactor Vessel Cooling (IVR-ERVC) strategy is adopted as the design concept, the local heat load imposed on the reactor vessel should be identified in order to confirm the integrity of the reactor vessel. There are several studies simulating the natural convection of the oxide pool experimentally. In them, modified Ra (Ra') substitutes conventional Ra in order to represents decay heat of the core melts, due to the self-exothermic condition of the oxide pool. Difficulties in those experiments were the realization of the homogeneous self-exothermic volumetric heat sources. For this reason, the experiments using semicircular facility were also carried out instead of those of hemisphere facility [5-8]. The mean and local Nu of the lower head and the top plate were measured and correlations of the mean Nu were developed in existing studies. However, the comparisons between 2D and 3D results and phenomenological analyses have not been sufficiently performed. In this study we measured and compared the mean and local Nu using 2D and 3D Mass Transfer Experimental Rig for Oxide Pool (MassTER-OP). The experiments were carried out using cupric acid copper sulfate (H{sub 2}SO{sub 4}-CuSO{sub 4}) electroplating system based on the analogy between heat and mass transfer system. The Pr was 2,014 and Ra'H were varied from 7.15X10{sup 12} to 3.05X10{sup 15}.
Imaging the motion of electrons in 2D semiconductor heterostructures
Dani, Keshav
Technological progress since the late 20th century has centered on semiconductor devices, such as transistors, diodes, and solar cells. At the heart of these devices, is the internal motion of electrons through semiconductor materials due to applied electric fields or by the excitation of photocarriers. Imaging the motion of these electrons would provide unprecedented insight into this important phenomenon, but requires high spatial and temporal resolution. Current studies of electron dynamics in semiconductors are generally limited by the spatial resolution of optical probes, or by the temporal resolution of electronic probes. In this talk, we combine femtosecond pump-probe techniques with spectroscopic photoemission electron microscopy to image the motion of photoexcited electrons from high-energy to low-energy states in a 2D InSe/GaAs heterostructure exhibiting a type-II band alignment. At the instant of photoexcitation, energy-resolved photoelectron images reveal a highly non-equilibrium distribution of photocarriers in space and energy. Thereafter, in response to the out-of-equilibrium photocarriers, we observe the spatial redistribution of charges, thus forming internal electric fields, bending the semiconductor bands, and finally impeding further charge transfer. By assembling images taken at different time-delays, we make a movie lasting a few tens of picoseconds of the electron transfer process in the photoexcited type-II heterostructure - a fundamental phenomenon in semiconductor devices like solar cells. Quantitative analysis and theoretical modeling of spatial variations in the video provide insight into future solar cells, electron dynamics in 2D materials, and other semiconductor devices.
2D model for melt progression through rods and debris
International Nuclear Information System (INIS)
Fichot, F.
2001-01-01
During the degradation of a nuclear core in a severe accident scenario, the high temperatures reached lead to the melting of materials. The formation of liquid mixtures at various elevations is followed by the flow of molten materials through the core. Liquid mixture may flow under several configurations: axial relocation along the rods, horizontal motion over a plane surface such as the core support plate or a blockage of material, 2D relocation through a debris bed, etc.. The two-dimensional relocation of molten material through a porous debris bed, implemented for the simulation of late degradation phases, has opened a new way to the elaboration of the relocation model for the flow of liquid mixture along the rods. It is based on a volume averaging method, where wall friction and capillary effects are taken into account by introducing effective coefficients to characterize the solid matrix (rods, grids, debris, etc.). A local description of the liquid flow is necessary to derive the effective coefficients. Heat transfers are modelled in a similar way. The derivation of the conservation equations for the liquid mixture falling flow (momentum) in two directions (axial and radial-horizontal) and for the heat exchanges (energy) are the main points of this new model for simulating melt progression. In this presentation, the full model for the relocation and solidification of liquid materials through a rod bundle or a debris bed is described. It is implemented in the ICARE/CATHARE code, developed by IPSN in Cadarache. The main improvements and advantages of the new model are: A single formulation for liquid mixture relocation, in 2D, either through a rod bundle or a porous debris bed, Extensions to complex structures (grids, by-pass, etc..), The modeling of relocation of a liquid mixture over plane surfaces. (author)
Directory of Open Access Journals (Sweden)
Leen van Ofwegen
2012-06-01
Full Text Available Nine new compounds, namely sinularones A–I (1–9, characterized as cyclopentenone and butenolide-type analogues, were isolated from a soft coral <em>Sinularia> sp., together with a known butenolide (10. Their structures were elucidated by means of spectroscopic (IR, MS, 1D and 2D NMR, CD analysis. The absolute configurations were determined on the basis of CD and specific rotation data in association with the computed electronic circular dichroism (ECD by time dependent density functional theory (TD DFT at 6-31+G(<em>d,p>//DFT B3LYP/6-31+G(<em>d,p> level. Compounds 1–2 and 7–10 showed potent antifouling activities against the barnacle <em>Balanus amphitriteem>.
Synthesis and Sensory Evaluation of <em>ent>-Kaurane Diterpene Glycosides
Directory of Open Access Journals (Sweden)
Venkata Sai Prakash Chaturvedula
2012-07-01
Full Text Available Catalytic hydrogenation of the three <em>ent>-kaurane diterpene glycosides isolated from <em>Stevia rebaudianaem>, namely rubusoside, stevioside, and rebaudioside-A has been carried out using Pd(OH_{2} and their corresponding dihydro derivatives have been isolated as the products. Synthesis of reduced steviol glycosides was performed using straightforward chemistry and their structures were characterized on the basis of 1D and 2D NMR spectral data and chemical studies. Also, we report herewith the sensory evaluation of all the reduced compounds against their corresponding original steviol glycosides and sucrose for the sweetness property of these molecules.
ELRIS2D: A MATLAB Package for the 2D Inversion of DC Resistivity/IP Data
Akca, Irfan
2016-04-01
ELRIS2D is an open source code written in MATLAB for the two-dimensional inversion of direct current resistivity (DCR) and time domain induced polarization (IP) data. The user interface of the program is designed for functionality and ease of use. All available settings of the program can be reached from the main window. The subsurface is discre-tized using a hybrid mesh generated by the combination of structured and unstructured meshes, which reduces the computational cost of the whole inversion procedure. The inversion routine is based on the smoothness constrained least squares method. In order to verify the program, responses of two test models and field data sets were inverted. The models inverted from the synthetic data sets are consistent with the original test models in both DC resistivity and IP cases. A field data set acquired in an archaeological site is also used for the verification of outcomes of the program in comparison with the excavation results.
Directory of Open Access Journals (Sweden)
Roberto E.B. Toledo
1993-01-01
Full Text Available Foram conduzidos três ensaios com o objetivo de estudar os efeitos de diferentes métodos de quebra de dormência das sementes, da qualidade da luz e da profundidade de semeadura na germinação e emergência do Xanthium strumarim L. (carrapichão. No primeiro ensaio, sob condições de câmara de crescimento, os tratamentos constaram de 5 métodos de quebra de dormência: mecânico (lixa, químico (H2SO4 conc. por 10 min., pré-tratamento em água (imersão por 2 horas, físico (choque térmico: água à 80oC por 2 min. e testemunha, que proporcionaram 100%, 93%, 93%, 87% e 80% de germinação, respectivamente, sem haver diferença estatística entre os mesmos. O pré-tratamento em água apresentou menor índice de velocidade de germinação (IVG e os demais não diferiram significativamente entre si. No segundo ensaio, também sob condições de câmara de crescimento, os tratamentos de qualidade da luz constaram de 6 filtros de luz, que resultaram nas seguintes porcentagens de germinação: azul - com refletividade máxima a 450 nm (13%, verde-500 nm (33%, vermelho-700 nm (13%, vermelho/distante-760 nm (7%, ausência de luz (26% e transparente - sem absortividade na região de 380 a 760 nm (testemunha, 73%, indicando sensibilidade das sementes à qualidade de luz. No terceiro ensaio, sob condições de casa-de-vegetação, os tratamentos foram diferentes profundidades de semeadura (0 a 20 cm, em intervalos de 2 cm, sendo que o máximo de emergência ocorreu no intervalo de 0 a 8 cm, no qual foi observado 67% de emergência do carrapichão, com maior índice de velocidade emergência (IVE, sendo que após os 16 cm, praticamente não houve emergência.Three trials were carried out to study the effects of different methods to overcome dormancy, light quality and sowing depth on the germination and emergence of Xanthium strumarim L. (cocklebur. In the first trial, under growth chamber conditions, the treatments consisted of 5 methods of seed
Sharp Boundary Inversion of 2D Magnetotelluric Data using Bayesian Method.
Zhou, S.; Huang, Q.
2017-12-01
Normally magnetotelluric(MT) inversion method cannot show the distribution of underground resistivity with clear boundary, even if there are obviously different blocks. Aiming to solve this problem, we develop a Bayesian structure to inverse 2D MT sharp boundary data, using boundary location and inside resistivity as the random variables. Firstly, we use other MT inversion results, like ModEM, to analyze the resistivity distribution roughly. Then, we select the suitable random variables and change its data format to traditional staggered grid parameters, which can be used to do finite difference forward part. Finally, we can shape the posterior probability density(PPD), which contains all the prior information and model-data correlation, by Markov Chain Monte Carlo(MCMC) sampling from prior distribution. The depth, resistivity and their uncertainty can be valued. It also works for sensibility estimation. We applied the method to a synthetic case, which composes two large abnormal blocks in a trivial background. We consider the boundary smooth and the near true model weight constrains that mimic joint inversion or constrained inversion, then we find that the model results a more precise and focused depth distribution. And we also test the inversion without constrains and find that the boundary could also be figured, though not as well. Both inversions have a good valuation of resistivity. The constrained result has a lower root mean square than ModEM inversion result. The data sensibility obtained via PPD shows that the resistivity is the most sensible, center depth comes second and both sides are the worst.
2D evaluation of spectral LIBS data derived from heterogeneous materials using cluster algorithm
Gottlieb, C.; Millar, S.; Grothe, S.; Wilsch, G.
2017-08-01
Laser-induced Breakdown Spectroscopy (LIBS) is capable of providing spatially resolved element maps in regard to the chemical composition of the sample. The evaluation of heterogeneous materials is often a challenging task, especially in the case of phase boundaries. In order to determine information about a certain phase of a material, the need for a method that offers an objective evaluation is necessary. This paper will introduce a cluster algorithm in the case of heterogeneous building materials (concrete) to separate the spectral information of non-relevant aggregates and cement matrix. In civil engineering, the information about the quantitative ingress of harmful species like Cl-, Na+ and SO42- is of great interest in the evaluation of the remaining lifetime of structures (Millar et al., 2015; Wilsch et al., 2005). These species trigger different damage processes such as the alkali-silica reaction (ASR) or the chloride-induced corrosion of the reinforcement. Therefore, a discrimination between the different phases, mainly cement matrix and aggregates, is highly important (Weritz et al., 2006). For the 2D evaluation, the expectation-maximization-algorithm (EM algorithm; Ester and Sander, 2000) has been tested for the application presented in this work. The method has been introduced and different figures of merit have been presented according to recommendations given in Haddad et al. (2014). Advantages of this method will be highlighted. After phase separation, non-relevant information can be excluded and only the wanted phase displayed. Using a set of samples with known and unknown composition, the EM-clustering method has been validated regarding to Gustavo González and Ángeles Herrador (2007).
MENTGES, M. I.; REICHERT, J. M.; ROSA, D. P. da; VIEIRA, D. A.; ROSA, V. T. da; REINERT, D. J.
2010-01-01
O objetivo deste trabalho foi avaliar o efeito da compactação nos atributos físico-hídricos do solo e na demanda energética da haste escarificadora, além de avaliar as propriedades físico-hídricas abaixo da profundidade de trabalho da haste. O trabalho foi conduzido em Argissolo Vermelho-Amarelo de textura francoarenosa, com os seguintes tratamentos: plantio direto por 13 anos; plantio direto por 13 anos em solo escarificado; plantio direto em solo com compactação adicional; e plantio direto ...
Pareto joint inversion of 2D magnetotelluric and gravity data
Miernik, Katarzyna; Bogacz, Adrian; Kozubal, Adam; Danek, Tomasz; Wojdyła, Marek
2015-04-01
In this contribution, the first results of the "Innovative technology of petrophysical parameters estimation of geological media using joint inversion algorithms" project were described. At this stage of the development, Pareto joint inversion scheme for 2D MT and gravity data was used. Additionally, seismic data were provided to set some constrains for the inversion. Sharp Boundary Interface(SBI) approach and description model with set of polygons were used to limit the dimensionality of the solution space. The main engine was based on modified Particle Swarm Optimization(PSO). This algorithm was properly adapted to handle two or more target function at once. Additional algorithm was used to eliminate non- realistic solution proposals. Because PSO is a method of stochastic global optimization, it requires a lot of proposals to be evaluated to find a single Pareto solution and then compose a Pareto front. To optimize this stage parallel computing was used for both inversion engine and 2D MT forward solver. There are many advantages of proposed solution of joint inversion problems. First of all, Pareto scheme eliminates cumbersome rescaling of the target functions, that can highly affect the final solution. Secondly, the whole set of solution is created in one optimization run, providing a choice of the final solution. This choice can be based off qualitative data, that are usually very hard to be incorporated into the regular inversion schema. SBI parameterisation not only limits the problem of dimensionality, but also makes constraining of the solution easier. At this stage of work, decision to test the approach using MT and gravity data was made, because this combination is often used in practice. It is important to mention, that the general solution is not limited to this two methods and it is flexible enough to be used with more than two sources of data. Presented results were obtained for synthetic models, imitating real geological conditions, where
2D/3D Visual Tracker for Rover Mast
Bajracharya, Max; Madison, Richard W.; Nesnas, Issa A.; Bandari, Esfandiar; Kunz, Clayton; Deans, Matt; Bualat, Maria
2006-01-01
A visual-tracker computer program controls an articulated mast on a Mars rover to keep a designated feature (a target) in view while the rover drives toward the target, avoiding obstacles. Several prior visual-tracker programs have been tested on rover platforms; most require very small and well-estimated motion between consecutive image frames a requirement that is not realistic for a rover on rough terrain. The present visual-tracker program is designed to handle large image motions that lead to significant changes in feature geometry and photometry between frames. When a point is selected in one of the images acquired from stereoscopic cameras on the mast, a stereo triangulation algorithm computes a three-dimensional (3D) location for the target. As the rover moves, its body-mounted cameras feed images to a visual-odometry algorithm, which tracks two-dimensional (2D) corner features and computes their old and new 3D locations. The algorithm rejects points, the 3D motions of which are inconsistent with a rigid-world constraint, and then computes the apparent change in the rover pose (i.e., translation and rotation). The mast pan and tilt angles needed to keep the target centered in the field-of-view of the cameras (thereby minimizing the area over which the 2D-tracking algorithm must operate) are computed from the estimated change in the rover pose, the 3D position of the target feature, and a model of kinematics of the mast. If the motion between the consecutive frames is still large (i.e., 3D tracking was unsuccessful), an adaptive view-based matching technique is applied to the new image. This technique uses correlation-based template matching, in which a feature template is scaled by the ratio between the depth in the original template and the depth of pixels in the new image. This is repeated over the entire search window and the best correlation results indicate the appropriate match. The program could be a core for building application programs for systems
Theory of small atomic-like 2D dust clusters
International Nuclear Information System (INIS)
Amiranashvili, Sh.G.; Gousein-zade, N.G.; Tsytovich, V.N.
2002-01-01
In several experiments atom-like dust clusters with parabolic confining potential were observed [1-3]. Here we present a general theory of 2D clusters confined by (1/2)m dω 0 2 r2 potential with arbitrary pair interaction potential depending on the inter-dust distance. It describes the equilibrium conditions, normal modes, their frequencies and possible instabilities of clusters with arbitrary N number of grains. The mono-layer clusters can have 2N frequencies of oscillations in the cluster plane among which 3 modes are trivial (ω = 0 and double degenerate frequency of oscillation in the potential well). The 2N - 3 non-trivial modes are considered. For example, for square dust cluster with potential V(r) the equilibrium is described by ω 0 2 = -(4/m) [V'(√(2)R) + V'(2R)], the frequency of radial oscillations is ω2 = (16R2/m) [V''(√(2)R) + 2V''(2R)], the two single modes frequencies are ω2 (32R2/m)V''(2R); ω2 = (16R2/m)V''(√(2)r) and one double degenerated mode frequency is ω2 = (1/m) [V'√(2)R) - V'(2R) + 4R2V''(√(2)R)] where ' corresponds to the differentiation of the potential V(r) with respect to √(r). The general stability criterion was found and investigated for N ≥ 4. The pair interaction potential V(r) is considered as a sum of different attraction and repulsion terms , including that which describe the non-screened collective and non collective attraction, the screened non-Coulomb interaction and the non-screened repulsion. The collective non-screened potential causes the absence of equilibria at certain dust cluster sizes. For screened Coulomb potential Vc(r) = (Z d 2 e2αscr/r)exp(-r/λscr) the clusters with the size R are considered. The pentagon cluster is found to be stable for R < 3.3λscr and the clusters with N ≥ 6 are found to be always unstable. The measurements of the frequencies of the cluster modes, the thresholds of cluster equilibria and the stability of the clusters can be used for detection of the dust
FLOWPLOT2, 2-D, 3-D Fluid Dynamic Plots
International Nuclear Information System (INIS)
Cobb, C.K.; Tunstall, J.N.
1989-01-01
1 - Description of program or function: FLOWPLOT2 is a plotting program used with numerical or analytical fluid dynamics codes to create velocity vector plots, contour plots of up to three fluid parameters (e.g. pressure, density, and temperature), two-dimensional profile plots, three-dimensional curve plots, and/or three-dimensional surface plots for either the u or v velocity components. If the fluid dynamics code computes a transient or simulated time related solution, FLOWPLOT2 can also be used to generate these plots for any specified time interval. Multiple cases generating different plots for different time intervals may be run in one execution of the program. In addition, plots can be created for selected two- dimensional planes of three-dimensional steady-state problems. The user has the option of producing plots on CalComp or Versatec plotters or microfiche and of creating a compressed dataset before plotting. 2 - Method of solution: FLOWPLOT2 reads a dataset written by the fluid dynamics code. This dataset must be written in a specified format and must contain parametric data at the nodal points of a uniform or non-uniform rectangular grid formed by the intersection of the grid lines of the model. 3 - Restrictions on the complexity of the problem - Maxima of: 2500 nodes, 40 y-values for 2-D profile plots and 3-D curve plots, 20 contour values, 3 fluid parameters
Projection-slice theorem based 2D-3D registration
van der Bom, M. J.; Pluim, J. P. W.; Homan, R.; Timmer, J.; Bartels, L. W.
2007-03-01
In X-ray guided procedures, the surgeon or interventionalist is dependent on his or her knowledge of the patient's specific anatomy and the projection images acquired during the procedure by a rotational X-ray source. Unfortunately, these X-ray projections fail to give information on the patient's anatomy in the dimension along the projection axis. It would be very profitable to provide the surgeon or interventionalist with a 3D insight of the patient's anatomy that is directly linked to the X-ray images acquired during the procedure. In this paper we present a new robust 2D-3D registration method based on the Projection-Slice Theorem. This theorem gives us a relation between the pre-operative 3D data set and the interventional projection images. Registration is performed by minimizing a translation invariant similarity measure that is applied to the Fourier transforms of the images. The method was tested by performing multiple exhaustive searches on phantom data of the Circle of Willis and on a post-mortem human skull. Validation was performed visually by comparing the test projections to the ones that corresponded to the minimal value of the similarity measure. The Projection-Slice Theorem Based method was shown to be very effective and robust, and provides capture ranges up to 62 degrees. Experiments have shown that the method is capable of retrieving similar results when translations are applied to the projection images.
Turbulent Dynamics of Partially-Ionized Fluids in 2D
Benavides, S.; Flierl, G.
2017-12-01
Ionization occurs in the upper atmospheres of Hot Jupiters, as well asthe interiors of Gas Giants, leading to Magnetohydrodynamic (MHD) effectswhich can significantly alter the flow. The interactions of these MHDregions with the non-ionized atmosphere will occur in transitionregions where only a fraction of the fluid is ionized. We areexploring the dynamics of Partially-Ionized MHD (PIMHD) using a twofluid model - one neutral and one ionized and subject to MHD -coupled by a collision, or Joule heating, term proportional to thedifference in velocities. By varying both the ionization fraction aswell as the collision frequency (coupling), we examine the parameterspace of 2D PIMHD turbulence in hopes of better understanding itscharacteristics in certain, possibly realistic, regimes. We payparticular attention to the Joule heating term and its role indissipation and energy exchange between the two species. Thisknowledge will serve as the basis to further studies in which we lookat, in a more realistic setting, the PIMHD dynamics in Gas Giant orHot Jupiter atmospheres.
Entanglement entropy for descendent local operators in 2D CFTs
International Nuclear Information System (INIS)
Chen, Bin; Guo, Wu-Zhong; He, Song; Wu, Jie-qiang
2015-01-01
We mainly study the Rényi entropy and entanglement entropy of the states locally excited by the descendent operators in two dimensional conformal field theories (CFTs). In rational CFTs, we prove that the increase of entanglement entropy and Rényi entropy for a class of descendent operators, which are generated by L"("−")L̄"("−") onto the primary operator, always coincide with the logarithmic of quantum dimension of the corresponding primary operator. That means the Rényi entropy and entanglement entropy for these descendent operators are the same as the ones of their corresponding primary operator. For 2D rational CFTs with a boundary, we confirm that the Rényi entropy always coincides with the logarithmic of quantum dimension of the primary operator during some periods of the evolution. Furthermore, we consider more general descendent operators generated by ∑d_{_n__i_}_{_n__j_}(∏_iL_−_n__i∏_jL̄_−_n__j) on the primary operator. For these operators, the entanglement entropy and Rényi entropy get additional corrections, as the mixing of holomorphic and anti-holomorphic Virasoro generators enhance the entanglement. Finally, we employ perturbative CFT techniques to evaluate the Rényi entropy of the excited operators in deformed CFT. The Rényi and entanglement entropies are increased, and get contributions not only from local excited operators but also from global deformation of the theory.
Topological Toughening of graphene and other 2D materials
Gao, Huajian
It has been claimed that graphene, with the elastic modulus of 1TPa and theoretical strength as high as 130 GPa, is the strongest material. However, from an engineering point of view, it is the fracture toughness that determines the actual strength of materials, as crack-like flaws (i.e., cracks, holes, notches, corners, etc.) are inevitable in the design, fabrication, and operation of practical devices and systems. Recently, it has been demonstrated that graphene has very low fracture toughness, in fact close to that of ideally brittle solids. These findings have raised sharp questions and are calling for efforts to explore effective methods to toughen graphene. Recently, we have been exploring the potential use of topological effects to enhance the fracture toughness of graphene. For example, it has been shown that a sinusoidal graphene containing periodically distributed disclination quadrupoles can achieve a mode I fracture toughness nearly twice that of pristine graphene. Here we report working progresses on further studies of topological toughening of graphene and other 2D materials. A phase field crystal method is adopted to generate the atomic coordinates of material with specific topological patterns. We then perform molecular dynamics simulations of fracture in the designed samples, and observe a variety of toughening mechanisms, including crack tip blunting, crack trapping, ligament bridging, crack deflection and daughter crack initiation and coalescence.
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, Babak; Lukatskaya, Maria R.; Gogotsi, Yury
2017-01-01
The family of 2D transition metal carbides, carbonitrides and nitrides (collectively referred to as MXenes) has expanded rapidly since the discovery of Ti3C2 in 2011. The materials reported so far always have surface terminations, such as hydroxyl, oxygen or fluorine, which impart hydrophilicity to their surfaces. About 20 different MXenes have been synthesized, and the structures and properties of dozens more have been theoretically predicted. The availability of solid solutions, the control of surface terminations and a recent discovery of multi-transition-metal layered MXenes offer the potential for synthesis of many new structures. The versatile chemistry of MXenes allows the tuning of properties for applications including energy storage, electromagnetic interference shielding, reinforcement for composites, water purification, gas- and biosensors, lubrication, and photo-, electro- and chemical catalysis. Attractive electronic, optical, plasmonic and thermoelectric properties have also been shown. In this Review, we present the synthesis, structure and properties of MXenes, as well as their energy storage and related applications, and an outlook for future research.
BFV-BRST quantization of 2D supergravity
International Nuclear Information System (INIS)
Fujiwara, T.; Igarashi, Y.; Kuriki, R.; Tabei, T.
1995-02-01
Two-dimensional supergravity theory is quantized as an anomalous gauge theory. In the Batalin-Fradkin (BF) formalism, the anomaly-canceling super-Liouville fields are introduced to identify the original second-class constrained system with a gauge-fixed version of a first-class system. The BFV-BRST quantization applies to formulate the theory in the most general class of gauges. A local effective action constructed in the configuration space contains two super-Liouville actions; one is a noncovariant but local functional written only in terms of 2D supergravity fields, and the other contains the super-Liouville fields canceling the super-Weyl anomaly. Auxiliary fields for the Liouville and the gravity super-multiplets are introduced to make the BRST algebra close off-shell. Inclusion of them turns out to be essentially important especially in the super-lightcone gauge-fixing, where the super-curvature equations (δ - 3 g ++ =δ - 2 χ ++ =0) are obtained as a result of BRST invariance of the theory. Our approach reveals the origin of the OSp (1,2) current algebra symmetry in a transparent manner. (author)
Dynamics and Chemistry in Jovian Atmospheres: 2D Hydrodynamical Simulations
Bordwell, B. R.; Brown, B. P.; Oishi, J.
2016-12-01
A key component of our understanding of the formation and evolution of planetary systems is chemical composition. Problematically, however, in the atmospheres of cooler gas giants, dynamics on the same timescale as chemical reactions pull molecular abundances out of thermochemical equilibrium. These disequilibrium abundances are treated using what is known as the "quench" approximation, based upon the mixing length theory of convection. The validity of this approximation is questionable, though, as the atmospheres of gas giants encompass two distinct dynamic regimes: convective and radiative. To resolve this issue, we conduct 2D hydrodynamical simulations using the state-of-the-art pseudospectral simulation framework Dedalus. In these simulations, we solve the fully compressible equations of fluid motion in a local slab geometry that mimics the structure of a planetary atmosphere (convective zone underlying a radiative zone). Through the inclusion of passive tracers, we explore the transport properties of both regimes, and assess the validity of the classical eddy diffusion parameterization. With the addition of active tracers, we examine the interactions between dynamical and chemical processes, and generate prescriptions for the observational community. By providing insight into mixing and feedback mechanisms in Jovian atmospheres, this research lays a solid foundation for future global simulations and the construction of physically-sound models for current and future observations.
Thermodynamics of the localized D2-D6 system
Energy Technology Data Exchange (ETDEWEB)
Gomez-Reino, Marta [Martin Fisher School of Physics, Brandeis University, Waltham, MA 02454 (United States)]. E-mail: marta@brandeis.edu; Naculich, Stephen G. [Department of Physics, Bowdoin College, Brunswick, ME 04011 (United States)]. E-mail: naculich@bowdoin.edu; Schnitzer, Howard J. [Martin Fisher School of Physics, Brandeis University, Waltham, MA 02454 (United States)]. E-mail: schnitzer@brandeis.edu
2005-05-02
An exact fully-localized extremal supergravity solution for N{sub 2} D2-branes and N{sub 6} D6-branes, which is dual to 3-dimensional supersymmetric SU(N{sub 2}) gauge theory with N{sub 6} fundamentals, was found by Cherkis and Hashimoto. In order to consider the thermal properties of the gauge theory we present the non-extremal extension of this solution to first order in an expansion near the core of the D6-branes. We compute the Hawking temperature and the black-brane horizon area/entropy. The leading-order entropy, which is proportional to N{sub 2}{sup 3/2}N{sub 6}{sup 1/2}T{sub H}{sup 2}, is not corrected to first order in the expansion. This result is consistent with the analogous weak-coupling result at the correspondence point N{sub 2} similar to N{sub 6}.
Automated human skull landmarking with 2D Gabor wavelets
de Jong, Markus A.; Gül, Atilla; de Gijt, Jan Pieter; Koudstaal, Maarten J.; Kayser, Manfred; Wolvius, Eppo B.; Böhringer, Stefan
2018-05-01
Landmarking of CT scans is an important step in the alignment of skulls that is key in surgery planning, pre-/post-surgery comparisons, and morphometric studies. We present a novel method for automatically locating anatomical landmarks on the surface of cone beam CT-based image models of human skulls using 2D Gabor wavelets and ensemble learning. The algorithm is validated via human inter- and intra-rater comparisons on a set of 39 scans and a skull superimposition experiment with an established surgery planning software (Maxilim). Automatic landmarking results in an accuracy of 1–2 mm for a subset of landmarks around the nose area as compared to a gold standard derived from human raters. These landmarks are located in eye sockets and lower jaw, which is competitive with or surpasses inter-rater variability. The well-performing landmark subsets allow for the automation of skull superimposition in clinical applications. Our approach delivers accurate results, has modest training requirements (training set size of 30–40 items) and is generic, so that landmark sets can be easily expanded or modified to accommodate shifting landmark interests, which are important requirements for the landmarking of larger cohorts.
2D deblending using the multi-scale shaping scheme
Li, Qun; Ban, Xingan; Gong, Renbin; Li, Jinnuo; Ge, Qiang; Zu, Shaohuan
2018-01-01
Deblending can be posed as an inversion problem, which is ill-posed and requires constraint to obtain unique and stable solution. In blended record, signal is coherent, whereas interference is incoherent in some domains (e.g., common receiver domain and common offset domain). Due to the different sparsity, coefficients of signal and interference locate in different curvelet scale domains and have different amplitudes. Take into account the two differences, we propose a 2D multi-scale shaping scheme to constrain the sparsity to separate the blended record. In the domain where signal concentrates, the multi-scale scheme passes all the coefficients representing signal, while, in the domain where interference focuses, the multi-scale scheme suppresses the coefficients representing interference. Because the interference is suppressed evidently at each iteration, the constraint of multi-scale shaping operator in all scale domains are weak to guarantee the convergence of algorithm. We evaluate the performance of the multi-scale shaping scheme and the traditional global shaping scheme by using two synthetic and one field data examples.
VAM2D: Variably saturated analysis model in two dimensions
International Nuclear Information System (INIS)
Huyakorn, P.S.; Kool, J.B.; Wu, Y.S.
1991-10-01
This report documents a two-dimensional finite element model, VAM2D, developed to simulate water flow and solute transport in variably saturated porous media. Both flow and transport simulation can be handled concurrently or sequentially. The formulation of the governing equations and the numerical procedures used in the code are presented. The flow equation is approximated using the Galerkin finite element method. Nonlinear soil moisture characteristics and atmospheric boundary conditions (e.g., infiltration, evaporation and seepage face), are treated using Picard and Newton-Raphson iterations. Hysteresis effects and anisotropy in the unsaturated hydraulic conductivity can be taken into account if needed. The contaminant transport simulation can account for advection, hydrodynamic dispersion, linear equilibrium sorption, and first-order degradation. Transport of a single component or a multi-component decay chain can be handled. The transport equation is approximated using an upstream weighted residual method. Several test problems are presented to verify the code and demonstrate its utility. These problems range from simple one-dimensional to complex two-dimensional and axisymmetric problems. This document has been produced as a user's manual. It contains detailed information on the code structure along with instructions for input data preparation and sample input and printed output for selected test problems. Also included are instructions for job set up and restarting procedures. 44 refs., 54 figs., 24 tabs
Functionalization of 2D transition metal dichalcogenides for biomedical applications
International Nuclear Information System (INIS)
Li, Zibiao; Wong, Swee Liang
2017-01-01
Recent research has revealed a gamut of interesting properties present in layered two-dimensional (2D) transition metal dichalcogenides (TMDCs) such as photoluminescence, comparatively high electron mobility, flexibility, mechanical strength and relatively low toxicity. The large surface to area ratio inherent in these materials also allows easy functionalization and maximal interaction with the external environment. Due to its unique physical and chemical properties, much work has been done in tailoring TMDCs through chemical functionalization for use in a diverse range of biomedical applications as biosensors, drug delivery carriers or even as therapeutic agents. In this review, current progress on the different types of TMDC functionalization for various biological applications will be presented and its future outlook will be discussed. - Highlights: • The different functionalization strategies and approaches of transition metal dichalcogenides are reviewed. • Properties of transition metal dichalcogenides useful for biomedical usage and their methods of synthesis are introduced. • Functionalization approaches are presented according to material type and their different application purpose is discussed.
Random 2D Composites and the Generalized Method of Schwarz
Directory of Open Access Journals (Sweden)
Vladimir Mityushev
2015-01-01
Full Text Available Two-phase composites with nonoverlapping inclusions randomly embedded in matrix are investigated. A straightforward approach is applied to estimate the effective properties of random 2D composites. First, deterministic boundary value problems are solved for all locations of inclusions, that is, for all events of the considered probabilistic space C by the generalized method of Schwarz. Second, the effective properties are calculated in analytical form and averaged over C. This method is related to the traditional method based on the average probabilistic values involving the n-point correlation functions. However, we avoid computation of the correlation functions and compute their weighted moments of high orders by an indirect method which does not address the correlation functions. The effective properties are exactly expressed through these moments. It is proved that the generalized method of Schwarz converges for an arbitrary multiply connected doubly periodic domain and for an arbitrary contrast parameter. The proposed method yields an algorithm which can be applied with symbolic computations. The Torquato-Milton parameter ζ1 is exactly written for circular inclusions.
The future of 2D metrology for display manufacturing
Sandstrom, Tor; Wahlsten, Mikael; Park, Youngjin
2016-10-01
The race to 800 PPI and higher in mobile devices and the transition to OLED displays are driving a dramatic development of mask quality: resolution, CDU, registration, and complexity. 2D metrology for large area masks is necessary and must follow the roadmap. Driving forces in the market place point to continued development of even more dense displays. State-of-the-art metrology has proven itself capable of overlay below 40 nm and registration below 65 nm for G6 masks. Future developments include incoming and recurrent measurements of pellicalized masks at the panel maker's factory site. Standardization of coordinate systems across supplier networks is feasible. This will enable better yield and production economy for both mask and panel maker. Better distortion correction methods will give better registration on the panels and relax the flatness requirements of the mask blanks. If panels are measured together with masks and the results are used to characterize the aligners, further quality and yield improvements are possible. Possible future developments include in-cell metrology and integration with other instruments in the same platform.
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, Babak
2017-01-17
The family of 2D transition metal carbides, carbonitrides and nitrides (collectively referred to as MXenes) has expanded rapidly since the discovery of Ti3C2 in 2011. The materials reported so far always have surface terminations, such as hydroxyl, oxygen or fluorine, which impart hydrophilicity to their surfaces. About 20 different MXenes have been synthesized, and the structures and properties of dozens more have been theoretically predicted. The availability of solid solutions, the control of surface terminations and a recent discovery of multi-transition-metal layered MXenes offer the potential for synthesis of many new structures. The versatile chemistry of MXenes allows the tuning of properties for applications including energy storage, electromagnetic interference shielding, reinforcement for composites, water purification, gas- and biosensors, lubrication, and photo-, electro- and chemical catalysis. Attractive electronic, optical, plasmonic and thermoelectric properties have also been shown. In this Review, we present the synthesis, structure and properties of MXenes, as well as their energy storage and related applications, and an outlook for future research.
A 2D nonlinear inversion of well-seismic data
International Nuclear Information System (INIS)
Métivier, Ludovic; Lailly, Patrick; Delprat-Jannaud, Florence; Halpern, Laurence
2011-01-01
Well-seismic data such as vertical seismic profiles are supposed to provide detailed information about the elastic properties of the subsurface at the vicinity of the well. Heterogeneity of sedimentary terrains can lead to far from negligible multiple scattering, one of the manifestations of the nonlinearity involved in the mapping between elastic parameters and seismic data. We present a 2D extension of an existing 1D nonlinear inversion technique in the context of acoustic wave propagation. In the case of a subsurface with gentle lateral variations, we propose a regularization technique which aims at ensuring the stability of the inversion in a context where the recorded seismic waves provide a very poor illumination of the subsurface. We deal with a huge size inverse problem. Special care has been taken for its numerical solution, regarding both the choice of the algorithms and the implementation on a cluster-based supercomputer. Our tests on synthetic data show the effectiveness of our regularization. They also show that our efforts in accounting for the nonlinearities are rewarded by an exceptional seismic resolution at distances of about 100 m from the well. They also show that the result is not very sensitive to errors in the estimation of the velocity distribution, as far as these errors remain realistic in the context of a medium with gentle lateral variations
Detection of circular telomeric DNA without 2D gel electrophoresis.
Dlaska, Margit; Anderl, Conrad; Eisterer, Wolfgang; Bechter, Oliver E
2008-09-01
The end of linear chromosomes forms a lasso-like structure called the t-loop. Such t-loops resemble a DNA recombination intermediate, where the single-stranded 3' overhang is arrested in a stretch of duplex DNA. Presumably, such a t-loop can also be deleted via a recombination process. This would result in the occurrence of circular extrachromosomal telomeric DNA (t-circles), which are known to be abundantly present in immortal cells engaging the recombination-based alternative lengthening of telomeres pathway (ALT pathway). Little is known about the basic mechanism of telomeric recombination in these cells and what ultimately causes the generation of such t-circles. Current standard procedures for detecting these molecules involve 2D gel electrophoresis or electron microscopy. However, both methods are labor intense and sophisticated to perform. Here, we present a simpler, faster, and equally sensitive method for detecting t-circles. Our approach is a telomere restriction fragment assay that involves the enzymatic preservation of circular DNA with Klenow enzyme followed by Bal31 degradation of the remaining linear DNA molecules. We show that with this approach t-circles can be detected in ALT cell lines, whereas no t-circles are present in telomerase-positive cell lines. We consider our approach a valid method in which t-circle generation is the experimental readout.
Ab initio modeling of 2D layered organohalide lead perovskites
Energy Technology Data Exchange (ETDEWEB)
Fraccarollo, Alberto; Cantatore, Valentina; Boschetto, Gabriele; Marchese, Leonardo; Cossi, Maurizio, E-mail: maurizio.cossi@uniupo.it [Dipartimento di Scienze e Innovazione Tecnologica (DISIT), Università del Piemonte Orientale, via T. Michel 11, I-15121 Alessandria (Italy)
2016-04-28
A number of 2D layered perovskites A{sub 2}PbI{sub 4} and BPbI{sub 4}, with A and B mono- and divalent ammonium and imidazolium cations, have been modeled with different theoretical methods. The periodic structures have been optimized (both in monoclinic and in triclinic systems, corresponding to eclipsed and staggered arrangements of the inorganic layers) at the DFT level, with hybrid functionals, Gaussian-type orbitals and dispersion energy corrections. With the same methods, the various contributions to the solid stabilization energy have been discussed, separating electrostatic and dispersion energies, organic-organic intralayer interactions and H-bonding effects, when applicable. Then the electronic band gaps have been computed with plane waves, at the DFT level with scalar and full relativistic potentials, and including the correlation energy through the GW approximation. Spin orbit coupling and GW effects have been combined in an additive scheme, validated by comparing the computed gap with well known experimental and theoretical results for a model system. Finally, various contributions to the computed band gaps have been discussed on some of the studied systems, by varying some geometrical parameters and by substituting one cation in another’s place.
2D modelling and its applications in engineering
International Nuclear Information System (INIS)
Altinbalik, M. Tahir; İRSEL, Gürkan
2013-01-01
A model, in computer aided engineering applications, may be created by either using a two- dimensional or a three-dimensional design depending on the purpose of design. What matters most in this regard is the selection of a right method to meet system solution requirements in the most economical way. Manufacturability of a design that is developed by utilising computer aided engineering is important, but usability of the data obtained in the course of design works in the production is also equally important. In the applications consisting of such production operations as CNC or plasma cutting, two-dimensional designs can be directly used in production. These machines are equipped with interfaces which converts two-dimensional drawings into codes. In this way, a design can be directly transferred to production, and any arrangements during production process can be synchronously evaluated. As a result of this, investment expenses will be lowered, and thus the costs can be reduced to some extent. In the presented study, we have studied two-dimensional design applications and requirements. We created a two-dimensional design for a part for which a three-dimensional model have previously been generated, and then, we transferred this design to plasma cutting machine, and thus, the operation has been realized experimentally. Key words: Plasma Cutting, 2D modelling, flexibility
Color constancy in 3D-2D face recognition
Meyer, Manuel; Riess, Christian; Angelopoulou, Elli; Evangelopoulos, Georgios; Kakadiaris, Ioannis A.
2013-05-01
Face is one of the most popular biometric modalities. However, up to now, color is rarely actively used in face recognition. Yet, it is well-known that when a person recognizes a face, color cues can become as important as shape, especially when combined with the ability of people to identify the color of objects independent of illuminant color variations. In this paper, we examine the feasibility and effect of explicitly embedding illuminant color information in face recognition systems. We empirically examine the theoretical maximum gain of including known illuminant color to a 3D-2D face recognition system. We also investigate the impact of using computational color constancy methods for estimating the illuminant color, which is then incorporated into the face recognition framework. Our experiments show that under close-to-ideal illumination estimates, one can improve face recognition rates by 16%. When the illuminant color is algorithmically estimated, the improvement is approximately 5%. These results suggest that color constancy has a positive impact on face recognition, but the accuracy of the illuminant color estimate has a considerable effect on its benefits.
2D Semiconductors for Valley-Polarized LEDs and Photodetectors
Yu, Ting
The recently discovered two-dimensional (2D) semiconductors, such as transitional-metal-dichalcogenide monolayers, have aroused great interest due to the underlying quantum physics and the appealing optoelectronic applications like atomically thin light-emitting diodes (LEDs) and photodetectors. On the one hand, valley-polarized electroluminescence and photocurrent from such monolayers have not caused enough attention but highly demanded as building blocks for the new generation valleytronic applications. On the other hand, most reports on these devices are based on the mechanically exfoliated small samples. Considering real applications, a strategy which could offer mass-product and high compatibility to the current planar processes is greatly demanded. Large-area samples prepared by chemical vapour deposition (CVD) are perfect candidates towards such a goal. Here, we report electrically tunable valley-polarized electroluminescence and the selective spin-valley-coupled photocurrent in optoelectronic devices based on monolayer WS2 and MoS2 grown by CVD, exhibiting large electroluminescence and photocurrent dichroisms of 81% and 60%, respectively. The controllable valley polarization and emission components of the electroluminescence have been realized by varying electrical injection of carriers. For the observed helicity-dependent photocurrent, the circular photogalvanic effect at resonant excitations has been found to take the dominant responsibility.
2D electron systems viewed through an RF spectrometer
International Nuclear Information System (INIS)
Andrei, E.Y.
1994-01-01
Electrons trapped at the liquid helium-vacuum interface are an almost ideal realization of a 2D electron system. I will describe experiments probing the in-plane as well as the out-of-plane motion of the electrons. The former have emphasized the dynamics and thermodynamics of the electronic motion within the plane to understand the nature of the liquid-solid transition and to outline its phase boundary. The latter have studied the escape out of the electron layer and provided an opportunity to observe tunneling in a clean and well-characterized system as well as to measure the effects of correlations on the tunneling process. More recently experiments in the presence of a magnetic field transverse to the direction of tunneling have revealed several novel phenomena associated with the magnetic coupling between the in-plane and the out-of-plane electronic motions. Together, these experiments helped uncover the multi-faceted physics that can be found in this system. (orig.)
Structure of solid H2-D2 mixtures
International Nuclear Information System (INIS)
Krupskij, I.N.; Kovalenko, S.I.; Krajnyukova, N.V.
1978-01-01
The structure of vapor deposited H 2 -D 2 solid mixtures is investigated. The electron-diffraction examination has been carried out in the temperature range from 2.3K up to the sample sublimation temperature, taking place in case of H 2 at T approximately 5K and D 2 -at T approximately 7K. On the basis of the difractogramm obtained it is shown that in solid films of pure components a FCC structure with parameters asub(Hsub(2))=5.310+-0.01A and asub(Osub(2))=5.100+-0.005A is realized, the structure being metastable in the temperature range. The existence of non-limitted solubility in solid two-component condensates is stated. The decay absence at T approximately 5K, when molecula mobility is enough for the transition of metastable FCC structure into HCP, is in good agreement with the results of experimental and theoretical estimations, according to which the decay critical temperature should not exceed 4K. The existance of the continuous series of solutions at lower temperatures is explained by a small coefficient value of a volumetric and surface diffusion of molecula as well
2D modelling and its applications in engineering
Energy Technology Data Exchange (ETDEWEB)
Altinbalik, M. Tahir; İRSEL, Gürkan [Trakya University, Faculty of Engineering and Architecture Mechanical Engineering Department, Edİrne (Turkey)
2013-07-01
A model, in computer aided engineering applications, may be created by either using a two- dimensional or a three-dimensional design depending on the purpose of design. What matters most in this regard is the selection of a right method to meet system solution requirements in the most economical way. Manufacturability of a design that is developed by utilising computer aided engineering is important, but usability of the data obtained in the course of design works in the production is also equally important. In the applications consisting of such production operations as CNC or plasma cutting, two-dimensional designs can be directly used in production. These machines are equipped with interfaces which converts two-dimensional drawings into codes. In this way, a design can be directly transferred to production, and any arrangements during production process can be synchronously evaluated. As a result of this, investment expenses will be lowered, and thus the costs can be reduced to some extent. In the presented study, we have studied two-dimensional design applications and requirements. We created a two-dimensional design for a part for which a three-dimensional model have previously been generated, and then, we transferred this design to plasma cutting machine, and thus, the operation has been realized experimentally. Key words: Plasma Cutting, 2D modelling, flexibility.
Numerical simulation of rock cutting using 2D AUTODYN
International Nuclear Information System (INIS)
Woldemichael, D E; Rani, A M Abdul; Lemma, T A; Altaf, K
2015-01-01
In a drilling process for oil and gas exploration, understanding of the interaction between the cutting tool and the rock is important for optimization of the drilling process using polycrystalline diamond compact (PDC) cutters. In this study the finite element method in ANSYS AUTODYN-2D is used to simulate the dynamics of cutter rock interaction, rock failure, and fragmentation. A two-dimensional single PDC cutter and rock model were used to simulate the orthogonal cutting process and to investigate the effect of different parameters such as depth of cut, and back rake angle on two types of rocks (sandstone and limestone). In the simulation, the cutting tool was dragged against stationary rock at predetermined linear velocity and the depth of cut (1,2, and 3 mm) and the back rake angles(-10°, 0°, and +10°) were varied. The simulation result shows that the +10° back rake angle results in higher rate of penetration (ROP). Increasing depth of cut leads to higher ROP at the cost of higher cutting force. (paper)
Tracking plastics in the Mediterranean: 2D Lagrangian model.
Liubartseva, S; Coppini, G; Lecci, R; Clementi, E
2018-04-01
Drift of floating debris is studied with a 2D Lagrangian model with stochastic beaching and sedimentation of plastics. An ensemble of >10 10 virtual particles is tracked from anthropogenic sources (coastal human populations, rivers, shipping lanes) to environmental destinations (sea surface, coastlines, seabed). Daily analyses of ocean currents and waves provided by CMEMS at a horizontal resolution of 1/16° are used to force the plastics. High spatio-temporal variability in sea-surface plastic concentrations without any stable long-term accumulations is found. Substantial accumulation of plastics is detected on coastlines and the sea bottom. The most contaminated areas are in the Cilician subbasin, Catalan Sea, and near the Po River Delta. Also, highly polluted local patches in the vicinity of sources with limited circulation are identified. An inverse problem solution, used to quantify the origins of plastics, shows that plastic pollution of every Mediterranean country is caused primarily by its own terrestrial sources. Copyright © 2018 Elsevier Ltd. All rights reserved.
Directory of Open Access Journals (Sweden)
Kristin eDickschen
2012-05-01
Full Text Available Tamoxifen is a first-line endocrine agent in the mechanism-based treatment of estrogen receptor positive (ER+ mammary carcinoma and applied to breast cancer patients all over the world. Endoxifen is a secondary and highly active metabolite of tamoxifen that is formed among others by the polymorphic cytochrome P450 2D6 (CYP2D6. It is widely accepted that CYP2D6 poor metabolizers (PM exert a pronounced decrease in endoxifen steady-state plasma concentrations compared to CYP2D6 extensive metabolizers (EM. Nevertheless, an in-depth understanding of the chain of cause and effect between CYP2D6 genotype, endoxifen steady-state plasma concentration, and subsequent tamoxifen treatment benefit still remains to be evolved.In this context, physiologically-based pharmacokinetic (PBPK-modeling provides a useful tool to mechanistically investigate the impact of CYP2D6 phenotype on endoxifen formation in female breast cancer patients undergoing tamoxifen therapy.It has long been thought that only a minor percentage of endoxifen is formed via 4-hydroxytamoxifen. However, the current investigation supports very recently published data that postulates a contribution of 4-hydroxytamoxifen above 20 % to total endoxifen formation. The developed PBPK-model describes tamoxifen PK in rats and humans. Moreover, tamoxifen metabolism in dependence of CYP2D6 phenotype in populations of European female individuals is well described, thus providing a good basis to further investigate the linkage of PK, mode of action, and treatment outcome in dependence of factors such as phenotype, ethnicity or co-treatment with CYP2D6 inhibitors.
G. González Rey
1999-01-01
Se exponen y discuten los inconvenientes de las clásicas y conocidas recomendaciones para decidir el espesor efectivo de capaendurecida en los dientes cementados de engranajes cilíndricos y cónicos. Además, se exponen los recientes trabajo realizados porISO TC60/WG 14 en la normalización de la profundidad efectiva de capa cementada, tomando como base las propuestas alemana yestadounidense. Es verificada mediante 5 ejemplos la aplicabilidad del estado actual de las recomendaciones de profundid...
Directory of Open Access Journals (Sweden)
Todor Ioana
2017-06-01
Full Text Available Objective: To analyze a potential phenotypic variation within the studied group based on the pharmacokinetic profile of atomoxetine and its active metabolite, and to further investigate the impact of CYP2D6 phenotype on atomoxetine pharmacokinetics. Methods: The study was conducted as an open-label, non-randomized clinical trial which included 43 Caucasian healthy volunteers. Each subject received a single oral dose of atomoxetine 25 mg. Subsequently, atomoxetine and 4-hydroxyatomoxetine-O-glucuronide (glucuronidated active metabolite plasma concentrations were determined and a noncompartmental method was used to calculate the pharmacokinetic parameters of both compounds. Further on, the CYP2D6 metabolic phenotype was assessed using the area under the curve (AUC metabolic ratio (atomoxetine/ 4-hydroxyatomoxetine-O-glucuronide and specific statistical tests (Lilliefors (Kolgomorov-Smirnov and Anderson-Darling test. The phenotypic differences in atomoxetine disposition were identified based on the pharmacokinetic profile of the parent drug and its metabolite. Results: The statistical analysis revealed that the AUC metabolic ratio data set did not follow a normal distribution. As a result, two different phenotypes were identified, respectively the poor metabolizer (PM group which included 3 individuals and the extensive metabolizer (EM group which comprised the remaining 40 subjects. Also, it was demonstrated that the metabolic phenotype significantly influenced atomoxetine pharmacokinetics, as PMs presented a 4.5-fold higher exposure to the parent drug and a 3.2-fold lower exposure to its metabolite in comparison to EMs. Conclusions: The pharmacokinetic and statistical analysis emphasized the existence of 2 metabolic phenotypes: EMs and PMs. Furthermore, it was proved that the interphenotype variability had a marked influence on atomoxetine pharmacokinetic profile.
Directory of Open Access Journals (Sweden)
M. Voss
1998-03-01
Full Text Available Entre os macronutrientes, o fósforo é o que com maior freqüência proporciona aumento na produtividade das culturas. Tem-se demonstrado que a obtenção de nitrogênio por algumas das simbioses rizóbio-leguminosas exige teores maiores de fósforo do que a planta adubada com nitrogênio. Visando aumentar a eficiência no aproveitamento de fósforo no solo sem incrementar a dose de adubação, testaram-se modos de localização de adubo com fosfato solúvel para as culturas de feijão e de grão-de-bico. O feijão, em ensaio instalado em Jaguapitã (PR, foi semeado, em outubro de 1986, em um Latossolo Vermelho-Escuro com 113 g kg-1 de argila e 2,2 mg dm-3 de P. O adubo fosfatado foi distribuído a 7 cm, e as sementes a 3 cm de profundidade, ambos no sulco de semeadura. Comparou-se a adubação no sulco com a adubação em covas, em doses de 50 e de 100 kg ha-1 de P2O5, como superfosfato triplo (SFT. Incluiu-se um tratamento extra com 25 kg ha-1 de P2O5 em covas, além de testemunha sem adubação fosfatada. O feijão foi semeado em covas. O ensaio com grão-de-bico foi instalado em Londrina (PR, em junho de 1987, em um Latossolo Roxo com 760 g kg-1 de argila e 3,6 mg dm-3 de P. A adubação foi feita a 7 cm de profundidade, e a semeadura a 3 cm de profundidade. Nesse ensaio, foram testados, nas parcelas, os tratamentos: testemunha sem rizóbio, inoculação com rizóbio e sem inoculação + 30 kg ha-1 de N e, nas subparcelas, a adubação fosfatada em linha ou em covas. O grão-de-bico foi semeado em linha. Foram avaliados os teores de N, P, Zn e Mn nas folhas de feijão, bem como a produtividade e a nodulação de feijão e de grão-de-bico. Não houve nodulação em feijão e a tendência para maior nodulação em grão-de-bico, quando a adubação foi aplicada em covas, não foi significativa. Houve aumento de cerca de 40% no rendimento do feijão e de 3l% no de grão-de-bico pela adubação em covas, em relação à adubação em linha. Em
Representações sociais de educação em saúde em tempos de AIDS
Directory of Open Access Journals (Sweden)
Elizabeth Teixeira
2014-10-01
Full Text Available Estudo qualitativo e descritivo, cujo objetivo foi identificar e analisar as representações sociais de educação em saúde à pessoa vivendo com HIV entre profissionais de saúde. Os cenários foram três serviços de atenção à DST/HIV/AIDS, em Belém-PA, Brasil, e 37 profissionais de saúde participaram da pesquisa. A coleta de dados deu-se em 2012-2013 por meio de entrevista em profundidade; a análise utilizou o software Alceste 4.10. Com base no conjunto dos resultados foi possível vislumbrar que a educação em saúde pode ser compreendida a partir de categorias: a configuração do agir educativo; as condições sine qua non: educação no trabalho e estrutura da unidade; o processo pedagógico. Conclui-se que as representações sociais configuram-se como orientação-informação para precaução-prevenção e revelam-se no movimento do agir persistente ao emergente, o que suscita uma educação em saúde permanente para se chegar à integralidade nos serviços.
Directory of Open Access Journals (Sweden)
Nunes Rogean Rodrigues
2004-01-01
Full Text Available JUSTIFICATIVA E OBJETIVOS: Entropia espectral, um novo método de análise do EEG, baseado na quantificação do caos do EEG, foi desenvolvido para monitorização da profundidade anestésica. Ele separa a monitorização em dois tipos de análise: entropia de estado (SE, que inclui sinais de baixa freqüência (< 32 Hz e entropia de resposta (RE, que inclui sinais com freqüência até 47 Hz. O objetivo deste estudo foi comparar os valores de entropia com os do BIS e respostas sub-corticais à intubação orotraqueal, em pacientes submetidos à anestesia geral com sevoflurano. MÉTODO: Participaram do estudo 36 pacientes com idades entre 20 e 44 anos, ASA I, distribuídos em quatro grupos de nove, submetidos à intubação orotraqueal (IOT. Em todos os grupos, a anestesia foi induzida com sevoflurano, associado ou não ao fentanil, de acordo com o seguinte: (G1 = sevoflurano e 2,5 µg.kg-1 de fentanil; G2 = sevoflurano e 5 µg.kg-1 de fentanil; G3 = sevoflurano e 7,5 µg.kg-1 de fentanil e G4 = sevoflurano e solução fisiológica. Foram avaliados os seguintes parâmetros: PAS, PAD, FC, BIS, SE, RE, concentração expirada do sevoflurano (CE e resposta motora à IOT em três momentos: M1 = imediatamente antes da indução; M2 = imediatamente antes da intubação traqueal e M3 = um minuto após a intubação traqueal. RESULTADOS: Os valores de BIS e SE variaram de maneira linear em todos os grupos, com diferenças significativas entre M2 e M3 nos grupos G1 e G4, tendo ambos (BIS e SE apresentado valores acima dos limítrofes entre consciência e inconsciência no momento M3 do G4. Em relação ao RE, apenas o G3 não mostrou variações estatisticamente significativas entre os momentos M2 e M3. As variações hemodinâmicas não ultrapassaram valores clinicamente significativos, exceto elevações da FC no G4 entre os momentos M1 e M3 (p < 0,05%. No G1, 66% dos pacientes reagiram as manobras de IOT e 100% no grupo G4. CONCLUSÕES: Este estudo
Movimentação de metais pesados em Latossolo adubado com composto de lixo urbano
Directory of Open Access Journals (Sweden)
Oliveira Fernando Carvalho
2002-01-01
Full Text Available Em experimento realizado no campo, nos anos agrícolas 1996/97 e 1997/98, em Latossolo Amarelo distrófico, cultivado com cana-de-açúcar, avaliou-se o efeito de aplicações sucessivas de composto de lixo urbano sobre a movimentação, em profundidade, dos metais Cd, Cr, Cu, Ni, Pb e zinco. No primeiro ano agrícola, além do tratamento testemunha, o composto de lixo foi aplicado nas doses de 20, 40 e 60 Mg ha-1 (base seca. No segundo ano, o composto foi reaplicado nas doses de 24, 48 e 72 Mg ha-1. Em relação aos metais Cd, Cr, Cu, Ni e Pb não se observou nenhuma evidência de movimentação ao longo do perfil do solo. O Zn apresentou mobilidade no solo, onde se verificou, ao final de 1997/98, incrementos significativos até a camada de 0,4-0,6 m de profundidade.
A large 2D PSD for thermal neutron detection
Energy Technology Data Exchange (ETDEWEB)
Knott, R.B.; Watt, G.; Boldeman, J.W. [Australian Nucl. Sci. and Tech. Organ., Menai, NSW (Australia). Phys. Div.; Smith, G.C. [Instrumentation Division, Brookhaven National Laboratory, Upton, NY 11973 (United States)
1997-06-21
A 2D PSD based on a MWPC has been constructed for a small angle neutron scattering instrument. The active area of the detector was 640 x 640 mm{sup 2}. To meet the specifications for neutron detection efficiency and spatial resolution, and to minimise parallax, the gas mixture was 190 kPa {sup 3}He plus 100 kPa CF{sub 4}, and the active volume had a thickness of 30 mm. The design maximum neutron count rate of the detector was 10{sup 5} events per second. The (calculated) neutron detection efficiency was 60% for 2 A neutrons and the (measured) neutron energy resolution on the anode grid was typically 20% (fwhm). The location of a neutron detection event within the active area was determined using the wire-by-wire method: the spatial resolution (5 x 5 mm{sup 2}) was thereby defined by the wire geometry. A 16-channel charge-sensitive preamplifier/amplifier/comparator module has been developed with a channel sensitivity of 0.1 V/fC, noise line width of 0.4 fC (fwhm) and channel-to-channel cross-talk of less than 5%. The proportional counter operating system (PCOS III) (LeCroy Corp, USA) was used for event encoding. The ECL signals produced by the 16 channel modules were latched in PCOS III by a trigger pulse from the anode and the fast encoders produce a position and width for each event. The information was transferred to a UNIX workstation for accumulation and online display. (orig.).
A large 2D PSD for thermal neutron detection
International Nuclear Information System (INIS)
Knott, R.B.; Watt, G.; Boldeman, J.W.; Smith, G.C.
1996-01-01
A 2D PSD based on a MWPC has been constructed for a small angle neutron scattering instrument. The active area of the detector was 640 x 640 mm 2 . To meet the specifications for neutron detection efficiency and spatial resolution, and to minimize parallax, the gas mixture was 190 kPa 3 He plus 100 kPa CF 4 and the active volume had a thickness of 30 mm. The design maximum neutron count-rate of the detector was 10 5 events per second. The (calculated) neutron detection efficiency was 60% for 2 angstrom neutrons and the (measured) neutron energy resolution on the anode grid was typically 20% (fwhm). The location of a neutron detection event within the active area was determined using the wire-by-wire method: the spatial resolution (5 x 5 mm 2 ) was thereby defined by the wire geometry. A 16 channel charge-sensitive preamplifier/amplifier/comparator module has been developed with a channel sensitivity of 0.1 V/fC, noise linewidth of 0.4 fC (fwhm) and channel-to-channel cross-talk of less than 5%. The Proportional Counter Operating System (PCOS III) (LeCroy Corp USA) was used for event encoding. The ECL signals produced by the 16 channel modules were latched in PCOS III by a trigger pulse from the anode and the fast encoders produce a position and width for each event. The information was transferred to a UNIX workstation for accumulation and online display
Extremes of 2d Coulomb gas: universal intermediate deviation regime
Lacroix-A-Chez-Toine, Bertrand; Grabsch, Aurélien; Majumdar, Satya N.; Schehr, Grégory
2018-01-01
In this paper, we study the extreme statistics in the complex Ginibre ensemble of N × N random matrices with complex Gaussian entries, but with no other symmetries. All the N eigenvalues are complex random variables and their joint distribution can be interpreted as a 2d Coulomb gas with a logarithmic repulsion between any pair of particles and in presence of a confining harmonic potential v(r) \\propto r2 . We study the statistics of the eigenvalue with the largest modulus r\\max in the complex plane. The typical and large fluctuations of r\\max around its mean had been studied before, and they match smoothly to the right of the mean. However, it remained a puzzle to understand why the large and typical fluctuations to the left of the mean did not match. In this paper, we show that there is indeed an intermediate fluctuation regime that interpolates smoothly between the large and the typical fluctuations to the left of the mean. Moreover, we compute explicitly this ‘intermediate deviation function’ (IDF) and show that it is universal, i.e. independent of the confining potential v(r) as long as it is spherically symmetric and increases faster than \\ln r2 for large r with an unbounded support. If the confining potential v(r) has a finite support, i.e. becomes infinite beyond a finite radius, we show via explicit computation that the corresponding IDF is different. Interestingly, in the borderline case where the confining potential grows very slowly as v(r) ∼ \\ln r2 for r \\gg 1 with an unbounded support, the intermediate regime disappears and there is a smooth matching between the central part and the left large deviation regime.
Self-leveling 2D DPN probe arrays
Haaheim, Jason R.; Val, Vadim; Solheim, Ed; Bussan, John; Fragala, J.; Nelson, Mike
2010-02-01
Dip Pen Nanolithography® (DPN®) is a direct write scanning probe-based technique which operates under ambient conditions, making it suitable to deposit a wide range of biological and inorganic materials. Precision nanoscale deposition is a fundamental requirement to advance nanoscale technology in commercial applications, and tailoring chemical composition and surface structure on the sub-100 nm scale benefits researchers in areas ranging from cell adhesion to cell-signaling and biomimetic membranes. These capabilities naturally suggest a "Desktop Nanofab" concept - a turnkey system that allows a non-expert user to rapidly create high resolution, scalable nanostructures drawing upon well-characterized ink and substrate pairings. In turn, this system is fundamentally supported by a portfolio of MEMS devices tailored for microfluidic ink delivery, directed placement of nanoscale materials, and cm2 tip arrays for high-throughput nanofabrication. Massively parallel two-dimensional nanopatterning is now commercially available via NanoInk's 2D nano PrintArray™, making DPN a high-throughput (>3×107 μm2 per hour), flexible and versatile method for precision nanoscale pattern formation. However, cm2 arrays of nanoscopic tips introduce the nontrivial problem of getting them all evenly touching the surface to ensure homogeneous deposition; this requires extremely precise leveling of the array. Herein, we describe how we have made the process simple by way of a selfleveling gimbal attachment, coupled with semi-automated software leveling routines which bring the cm^2 chip to within 0.002 degrees of co-planarity. This excellent co-planarity yields highly homogeneous features across a square centimeter, with <6% feature size standard deviation. We have engineered the devices to be easy to use, wire-free, and fully integrated with both of our patterning tools: the DPN 5000, and the NLP 2000.
von Ahsen, Nicolas; Tzvetkov, Mladen; Karunajeewa, Harin A; Gomorrai, Servina; Ura, Alice; Brockmöller, Jürgen; Davis, Timothy M E; Mueller, Ivo; Ilett, Kenneth F; Oellerich, Michael
2010-08-18
A high frequency of previously unknown CYP2D6 alleles have been reported in Oceania populations. Genetic and functional properties of these alleles remain unknown. We performed analyses of the genetic variability of CYP2D6 and CYP2C19 genes using AmpliChip genotyping in cohorts from two distinct Papua New Guinea (PNG) populations (Kunjingini, n=88; Alexishafen, n=84) focussing on the genetic characterisation of PNG-specific alleles by re-sequencing. Previously unknown CYP2D6 alleles have population frequencies of 24% (Kunjingini) and 12% (Alexishafen). An allele similar to CYP2D6*1, but carrying the 1661G>C substitution, was the second most frequent CYP2D6 allele (20% Kunjingini and 10% Alexishafen population frequency). Sequencing suggests the CYP2D6* 1661G>C allele originated from a cross-over between CYP2D6*1 and *2 and thus is predicted to confer fully active CYP2D6 enzyme. Two additional predicted full activity alleles [1661G>C;4180G>C] and 31G>A were found in the Kunjingini cohort (frequencies 3 c/c and 1%, respectively) and a novel predicted reduced activity allele [100C>T;1039C>T] was found in the Alexishafen cohort (frequency 2%). A high frequency of ultra-rapid (15%) and notably low frequencies of intermediate and poor CYP2D6 metabolizers (exogamy and recent introduction of alleles by migration that are yet to reach HWE in relatively isolated populations. The CYP2D6*1661 allele common in Oceania may be regarded as functionally equivalent to the full activity CYP2D6*1 allele.
Data of evolutionary structure change: 1ONAD-2D3PD [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3PD 1ONA 2D3P D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT.../entryChain> 1ONA D 1ONAD
Data of evolutionary structure change: 1ONAD-2D3RB [Confc[Archive
Lifescience Database Archive (English)
Full Text Available 1ONAD-2D3RB 1ONA 2D3R D B ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...pdbID>1ONA D 1ONAD TRVSSNGSPQG
Lin, Zhijie; Wang, Changrong; Xia, Haizui; Liu, Weiguang; Xiao, Weiming; Qian, Li; Jia, Xiaoqin; Ding, Yanbing; Ji, Mingchun; Gong, Weijuan
2014-01-01
The binding of NKG2D to its ligands strengthens the cross-talk between natural killer (NK) cells and dendritic cells, particularly at early stages, before the initiation of the adaptive immune response. We found that retinoic acid early transcript-1ε (RAE-1ε), one of the ligands of NKG2D, was persistently expressed on antigen-presenting cells in a transgenic mouse model (pCD86-RAE-1ε). By contrast, NKG2D expression on NK cells, NKG2D-dependent cytotoxicity and tumour rejection, and dextran sodium sulphate-induced colitis were all down-regulated in this mouse model. The down-regulation of NKG2D on NK cells was reversed by stimulation with poly (I:C). The ectopic expression of RAE-1ε on dendritic cells maintained NKG2D expression levels and stimulated the activity of NK cells ex vivo, but the higher frequency of CD4+ NKG2D+ T cells in transgenic mice led to the down-regulation of NKG2D on NK cells in vivo. Hence, high levels of RAE-1ε expression on antigen-presenting cells would be expected to induce the down-regulation of NK cell activation by a regulatory T-cell subset. PMID:24708417
Lin, Zhijie; Wang, Changrong; Xia, Haizui; Liu, Weiguang; Xiao, Weiming; Qian, Li; Jia, Xiaoqin; Ding, Yanbing; Ji, Mingchun; Gong, Weijuan
2014-03-01
The binding of NKG2D to its ligands strengthens the cross-talk between natural killer (NK) cells and dendritic cells, particularly at early stages, before the initiation of the adaptive immune response. We found that retinoic acid early transcript-1ε (RAE-1ε), one of the ligands of NKG2D, was persistently expressed on antigen-presenting cells in a transgenic mouse model (pCD86-RAE-1ε). By contrast, NKG2D expression on NK cells, NKG2D-dependent cytotoxicity and tumour rejection, and dextran sodium sulphate-induced colitis were all down-regulated in this mouse model. The down-regulation of NKG2D on NK cells was reversed by stimulation with poly (I:C). The ectopic expression of RAE-1ε on dendritic cells maintained NKG2D expression levels and stimulated the activity of NK cells ex vivo, but the higher frequency of CD4(+) NKG2D(+) T cells in transgenic mice led to the down-regulation of NKG2D on NK cells in vivo. Hence, high levels of RAE-1ε expression on antigen-presenting cells would be expected to induce the down-regulation of NK cell activation by a regulatory T-cell subset. © 2013 John Wiley & Sons Ltd.
Componentes oculares em anisometropia The ocular components in anisometropia
Directory of Open Access Journals (Sweden)
David Tayah
2007-06-01
Full Text Available OBJETIVO: Comparar as correlações dos componentes oculares (comprimento axial, comprimento do segmento anterior, poder médio da córnea, profundidade da câmara vítrea e poder refrativo equivalente com o erro refrativo total do olho portador da menor e da maior ametropia em anisométropes. MÉTODOS: Foi realizado um "survey" analítico conduzido em população de 68 anisométropes de duas ou mais dioptrias atendida no Ambulatório da Clinica Oftalmológica do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo Os anisométropes foram submetidos à refração estática objetiva e subjetiva, ceratometria e biometria ultra-sônica. RESULTADOS: Não houve diferença significativa entre os valores dos componentes oculares medidos dos olhos portadores da menor e da maior ametropia. Os olhos portadores da menor ametropia apresentaram as mesmas correlações significantes observadas em olhos emétropes, ou seja, correlação da refração com comprimento do segmento anterior e comprimento axial, e correlação do comprimento axial com poder corneano e profundidade da câmara vítrea. Os olhos portadores da maior ametropia apresentaram correlação significante da refração com o comprimento axial e do comprimento axial com a profundidade da câmara vítrea. Ainda em ambos os olhos observou-se correlação significante do poder do cristalino com a profundidade da câmara anterior. CONCLUSÃO: Os olhos portadores da menor ametropia desenvolveram as correlações mais freqüentemente observadas nos olhos emétropes. Os olhos portadores da maior ametropia não desenvolveram as mesmas correlações dos emétropes.PURPOSE: To asses the correlation between ocular components (axial length, anterior segment length, corneal power, vitreous length and equivalent power of the eye and refractive error in eyes with higher and lower ametropia of subjects with anisometropia. METHODS: An analytical survey was carried out in 68 patients
Magnetometry and transport studies of 2D systems
Energy Technology Data Exchange (ETDEWEB)
Watts, J.P
1999-06-01
This thesis presents measurements of the magnetisation and magnetotransport of two-dimensional electron and hole systems, at low temperatures and high magnetic fields. When the magnetic field is swept through a resistivity minimum associated with the quantum Hall effect, circulating 'eddy' currents are induced in the 2D electron system. These currents may be large enough to cause breakdown of the quantum Hall effect. Breakdown has been examined in high-mobility electron and hole samples, by recording the magnetic moments associated with these eddy currents, and the results have been compared to breakdown models. Eddy currents observed at fractional quantum Hall effect (FQHE) filling factors have been used to determine the FQHE gap energy. The measured value is far closer to theoretical predictions than the results of conventional measurements: this is thought to be because breakdown arises through inter-Landau-level tunnelling, which is local on the scale of the disorder. A series of quantum Hall effect measurements have been performed on a low density sample. Depopulating the Landau levels by applying an increasing gate voltage allowed the numbers of localised and extended states to be counted at each magnetic field. The number of extended states may the be plotted as a function of reducing magnetic field. In certain circumstances, the number of extended states drops to zero before the magnetic field is zero: the system is entirely localised for a range of small fields, consistent with the theories of levitation of extended states. The idea that each Landau level contains only one extended state is also challenged. Measurements of the equilibrium magnetisation of a 2DES may be used to give insight into the shape of the electron density of states. Results are presented of the de Haas - van Alphen oscillations of a very high mobility, low density sample, in which magnetisation oscillations are observed at odd as well as even integer filling factors. The
Creating virtual electrodes with 2D current steering
Spencer, Thomas C.; Fallon, James B.; Shivdasani, Mohit N.
2018-06-01
Objective. Current steering techniques have shown promise in retinal prostheses as a way to increase the number of distinct percepts elicitable without increasing the number of implanted electrodes. Previously, it has been shown that ‘virtual’ electrodes can be created between simultaneously stimulated electrode pairs, producing unique cortical response patterns. This study investigated whether virtual electrodes could be created using 2D current steering, and whether these virtual electrodes can produce cortical responses with predictable spatial characteristics. Approach. Normally-sighted eyes of seven adult anaesthetised cats were implanted with a 42-channel electrode array in the suprachoroidal space and multi-unit neural activity was recorded from the visual cortex. Stimuli were delivered to individual physical electrodes, or electrodes grouped into triangular, rectangular, and hexagonal arrangements. Varying proportions of charge were applied to each electrode in a group to ‘steer’ current and create virtual electrodes. The centroids of cortical responses to stimulation of virtual electrodes were compared to those evoked by stimulation of single physical electrodes. Main results. Responses to stimulation of groups of up to six electrodes with equal ratios of charge on each electrode resulted in cortical activation patterns that were similar to those elicited by the central physical electrode (centroids: RM ANOVA on ranks, p > 0.05 neural spread: one-way ANOVA on Ranks, p > 0.05). We were also able to steer the centroid of activation towards the direction of any of the electrodes of the group by applying a greater charge to that electrode, but the movement in the centroid was not found to be significant. Significance. The results suggest that current steering is possible in two dimensions between up to at least six electrodes, indicating it may be possible to increase the number of percepts in patients without increasing the number
Regularity of the 3D Navier-Stokes equations with viewpoint of 2D flow
Bae, Hyeong-Ohk
2018-04-01
The regularity of 2D Navier-Stokes flow is well known. In this article we study the relationship of 3D and 2D flow, and the regularity of the 3D Naiver-Stokes equations with viewpoint of 2D equations. We consider the problem in the Cartesian and in the cylindrical coordinates.
Directory of Open Access Journals (Sweden)
Andrés Gómez
2011-10-01
Full Text Available El árbol de Durazno (P. pérsica está constituido por dos partes estructurales: una epigea, conformada por el tronco que soporta el sistema caulinar, y otra hipogea que constituye el sistema radicular. Este último, de acuerdo con la base morfoanatómica y las funciones específicas, presenta varios tipos de raíces: absorbentes, de transición y de conducción. Las absorbentes (de color blanquecino translúcido son fisiológicamente muy activas y representanentre el 80 y el 85% de la totalidad del sistema radical. Aunque las raícesde los árboles frutales se desarrollan siguiendo un patrón genético, algunas condiciones medio ambientales producen variaciones morfológicas en su desarrollo. En este trabajo se estudió la densidad del aparato radical absorbente en el cultivo de Durazno (variedad Dorado, a 10 cm de profundidad. Se empleó la técnica volumen del cilindro, en función del manejo del suelo, utilizando 2 tipos de coberturas (cobertura viva, cobertura muerta, control dearvenses con herbicida y un referente tradicional con labranza. Los resultados mostraron que la cobertura con material vegetal muerto, sobre el suelo (10 cm de profundidad bajo el diámetro de la copa del árbol (160 cm, generóun mayor desarrollo del sistema radicular, evidente en una mayor densidad.
Directory of Open Access Journals (Sweden)
Bordin Ivan
2005-01-01
Full Text Available O trabalho teve como objetivo avaliar a influência da escarificação sobre atributos físicos do solo e sobre a distribuição do sistema radicular do limão ?Cravo? (Citrus limonia Osb sob copa de laranja ?Pêra? (Citrus sinensis L. Osb. Foram abertas quatro trincheiras para cada tratamento (entrelinha escarificada e entrelinha não escarificada avaliando-se distribuição das raízes na linha e entrelinha até a profundidade de 1,0 m pelo Sistema Integrado de Análise de Raízes e Cobertura do Solo (SIARCS 3.0. A porosidade total e a densidade do solo foram avaliadas em três profundidades (0,000-0,125; 0,125-0,250 e 0,25-0,375 m em três posições: linha, centro da entrelinha e limite da copa na entrelinha. Três anos depois da escarificação não se detectou alteração para a densidade e a porosidade total do solo nas entrelinhas do pomar e a quantidade de raízes, independentemente da profundidade e posição em relação à planta.
From 2D-sprite to skeletal animation : boosting the performance of a mobile application
Lehtonen, Jenni
2016-01-01
This thesis focuses on 2D animation in video games and programs for creating the animations. The purpose was to find the most efficient way to make 2D animations for games, and the best program for making them. At first, the thesis presents different 2D animation methods which have been used in games during their history. For this purpose, the animation methods and a number of 2D games from different decades were researched. The thesis then presents different 2D animation programs and...
Confidentiality of 2D Code using Infrared with Cell-level Error Correction
Directory of Open Access Journals (Sweden)
Nobuyuki Teraura
2013-03-01
Full Text Available Optical information media printed on paper use printing materials to absorb visible light. There is a 2D code, which may be encrypted but also can possibly be copied. Hence, we envisage an information medium that cannot possibly be copied and thereby offers high security. At the surface, the normal 2D code is printed. The inner layers consist of 2D codes printed using a variety of materials, which absorb certain distinct wavelengths, to form a multilayered 2D code. Information can be distributed among the 2D codes forming the inner layers of the multiplex. Additionally, error correction at cell level can be introduced.
Paul, J T; Singh, A K; Dong, Z; Zhuang, H; Revard, B C; Rijal, B; Ashton, M; Linscheid, A; Blonsky, M; Gluhovic, D; Guo, J; Hennig, R G
2017-11-29
The discovery of two-dimensional (2D) materials comes at a time when computational methods are mature and can predict novel 2D materials, characterize their properties, and guide the design of 2D materials for applications. This article reviews the recent progress in computational approaches for 2D materials research. We discuss the computational techniques and provide an overview of the ongoing research in the field. We begin with an overview of known 2D materials, common computational methods, and available cyber infrastructures. We then move onto the discovery of novel 2D materials, discussing the stability criteria for 2D materials, computational methods for structure prediction, and interactions of monolayers with electrochemical and gaseous environments. Next, we describe the computational characterization of the 2D materials' electronic, optical, magnetic, and superconducting properties and the response of the properties under applied mechanical strain and electrical fields. From there, we move on to discuss the structure and properties of defects in 2D materials, and describe methods for 2D materials device simulations. We conclude by providing an outlook on the needs and challenges for future developments in the field of computational research for 2D materials.
Nuñez-Reyes, Dianailys; Hickson, Kevin M
2018-06-18
The gas-phase reaction of metastable atomic nitrogen N(2D) with nitric oxide has been investigated over the 296-50 K temperature range using a supersonic flow reactor. As N(2D) could not be produced photolytically in the present work, these excited state atoms were generated instead through the C(3P) + NO → N(2D) + CO reaction while C(3P) atoms were created in situ by the 266 nm pulsed laser photolysis of CBr4 precursor molecules. The kinetics of N(2D) atoms were followed on-resonance by vacuum ultraviolet laser induced fluorescence at 116.7 nm. The measured rate constants for the N(2D) + NO reaction are in excellent agreement with most of the earlier work at room temperature and represent the only available kinetic data for this process below 296 K. The rate constants are seen to increase slightly as the temperature falls to 100 K with a more substantial increase at even lower temperature; a finding which is not reproduced by theoretical work. The prospects for using this chemical source of N(2D) atoms in future studies of a wide range of N(2D) atom reactions are discussed.
Permeabilidade ao ar em Latossolo Vermelho sob diferentes sistemas de manejo
Directory of Open Access Journals (Sweden)
Sueli Rodrigues
2011-02-01
Full Text Available A permeabilidade ao ar pode ser utilizada para avaliar alterações que ocorrem na estrutura do solo em virtude da adoção de diferentes sistemas de manejo. Este estudo testou a hipótese de que o menor revolvimento do solo sob sistema plantio direto resulta na formação de poros mais contínuos e melhor condição de aeração no solo. O objetivo deste trabalho foi avaliar, por meio da permeabilidade ao ar (Ka, da porosidade de aeração (εa e dos índices de continuidade de poros (K1 e N, a aeração em um Latossolo Vermelho distrófico sob preparo convencional (PC e sistema plantio direto (SPD. Oitenta amostras de solo (2 tratamentos x 2 profundidades x 20 repetições com estrutura indeformada foram coletadas de cada sistema de manejo do solo nas profundidades de 0-0,10 e 0,10-0,20 m em área experimental do Instituto Agronômico do Paraná, no município de Ponta Grossa, Paraná. Depois de saturadas e equilibradas em seis potenciais mátricos (-2, -6, -10, -30, -70 e -100 kPa, determinou-se a permeabilidade ao ar e a porosidade de aeração em cada potencial. Também foram determinados a densidade do solo, a densidade de partícula, o carbono orgânico e a porosidade. A densidade do solo não consistiu em fator limitante, ficando abaixo do limite crítico para solos argilosos nos dois sistemas. No SPD, o maior volume de microporos resultou em maior retenção de água no intervalo de umidade avaliado (-2 a -100 kPa e em maior volume de poros bloqueados para o fluxo de ar (εb, ou seja, redução de Ka. Na profundidade avaliada (00,20 m, os índices de continuidade de poros (K1 e N revelaram que o PC apresentou poros mais contínuos do que o SPD, contradizendo a hipótese testada.
Comparison Between Digital and Synthetic 2D Mammograms in Breast Density Interpretation.
Alshafeiy, Taghreed I; Wadih, Antoine; Nicholson, Brandi T; Rochman, Carrie M; Peppard, Heather R; Patrie, James T; Harvey, Jennifer A
2017-07-01
The purpose of this study was to compare assessments of breast density on synthetic 2D images as compared with digital 2D mammograms. This retrospective study included consecutive women undergoing screening with digital 2D mammography and tomosynthesis during May 2015 with a negative or benign outcome. In separate reading sessions, three radiologists with 5-25 years of clinical experience and 1 year of experience with synthetic 2D mammography read digital 2D and synthetic 2D images and assigned breast density categories according to the 5th edition of BI-RADS. Inter- and intrareader agreement was assessed for each BI-RADS density assessment and combined dense and nondense categories using percent agreement and Cohen kappa coefficient for consensus and all reads. A total of 309 patients met study inclusion criteria. Agreement between consensus BI-RADS density categories assigned for digital and synthetic 2D mammography was 80.3% (95% CI, 75.4-84.5%) with κ = 0.73 (95% CI, 0.66-0.79). For combined dense and nondense categories, agreement reached 91.9% (95% CI, 88.2-94.7%). For consensus readings, similar numbers of patients were shifted between nondense and dense categories (11 and 14, respectively) with the synthetic 2D compared with digital 2D mammography. Interreader differences were apparent; assignment to dense categories was greater with digital 2D mammography for reader 1 (odds ratio [OR], 1.26; p = 0.002), the same for reader 2 (OR, 0.91; p = 0.262), and greater with synthetic 2D mammography for reader 3 (OR, 0.86; p = 0.033). Overall, synthetic 2D mammography is comparable with digital 2D mammography in assessment of breast density, though there is some variability by reader. Practices can readily adopt synthetic 2D mammography without concern that it will affect density assessment and subsequent recommendations for supplemental screening.
Energy Technology Data Exchange (ETDEWEB)
Ribeiro, Nier M.; Gomes, Jose A.T.; Camarao, Luciano F.; Oliveira, Rildo M. de; Steagall, Daniel E.; Carvalho, Marimonica R.J. [PETROBRAS, Rio de Janeiro, RJ (Brazil)
2004-07-01
With the aim to drill a horizontal well in the fault shadow zone, various techniques of time to depth conversion were used in a study to minimize the uncertainties. After removing some wells close to the fault and doing a conversion only based on VELAN (Velocities from Seismic Processing) the result had a considerable difference comparing to a conversion based on VELAN and wells. After this exercise, the confidence on the seismic cube was lost, especially for new projects close to the fault. To drill new wells in that region, a geologic model without the seismic was done to predict the depth values of the top of the reservoir. In addition, a new seismic in depth using the technique PSDM (Pre Stack Depth Migration) will be generated being taken into account that geological model. (author)
Davies, Benjamin J; Coller, Janet K; Somogyi, Andrew A; Milne, Robert W; Sallustio, Benedetta C
2007-01-01
The cytochrome P450 (P450)-mediated 4-monohydroxylations of the individual enantiomers of the racemic antianginal agent perhexiline (PHX) were investigated in human liver microsomes (HLMs) to identify stereoselective differences in metabolism and to determine the contribution of the polymorphic enzyme CYP2D6 and other P450s to the intrinsic clearance of each enantiomer. The cis-, trans1-, and trans2-4-monohydroxylation rates of (+)- and (-)-PHX by human liver microsomes from three extensive metabolizers (EMs), two intermediate metabolizers (IMs), and two poor metabolizers (PMs) of CYP2D6 were measured with a high-performance liquid chromatography assay. P450 isoform-specific inhibitors, monoclonal antibodies directed against P450 isoforms, and recombinantly expressed human P450 enzymes were used to define the P450 isoform profile of PHX 4-monohydroxylations. The total in vitro intrinsic clearance values (mean +/- S.D.) of (+)- and (-)-PHX were 1376 +/- 330 and 2475 +/- 321, 230 +/- 225 and 482 +/- 437, and 63.4 +/- 1.6 and 54.6 +/- 1.2 microl/min/mg for the EM, IM, and PM HLMs, respectively. CYP2D6 catalyzes the formation of cis-OH-(+)-PHX and trans1-OH-(+)-PHX from (+)-PHX and cis-OH-(-)-PHX from (-)-PHX with high affinity. CYP2B6 and CYP3A4 each catalyze the trans1- and trans2-4-monohydroxylation of both (+)- and (-)-PHX with low affinity. Both enantiomers of PHX are subject to significant polymorphic metabolism by CYP2D6, although this enzyme exhibits distinct stereoselectivity with respect to the conformation of metabolites and the rate at which they are formed. CYP2B6 and CYP3A4 are minor contributors to the intrinsic P450-mediated hepatic clearance of both enantiomers of PHX, except in CYP2D6 PMs.
Collective properties of 2D magnetoexcitons interacting with plasmons
International Nuclear Information System (INIS)
Dumanov, Evghenij
2009-01-01
shown that in the electron-hole system exists a possibility of different virtual quasi-energy complexes with different free energies and rates damping formation, which in fact depend on their free energies. We have found out such equations of motion for operators of density fluctuations which permits obtain plasma oscillations without damping in our approximation for the Green function. The intra-Landau level excitations of the two-dimensional electron-hole liquid are characterized by two branches of the energy spectrum. One of them is the acoustical plasmon type branch with the linear dispersion law in the range of small wave vectors and monotonically increasing with saturation behavior at higher wave vectors. The second branch of the elementary excitations is an optical-plasmon branch with quadratic dispersion law at small wave vectors with a roton-type dispersion at intermediary wave vectors and with a similar behavior as the acoustical branch at higher wave vectors. It is essential that there exist density oscillations within the LLL, even though 2D system is under the influence of strong perpendicular magnetic field and quasi-particles have no kinetic energy. Energy spectrum of collective elementary excitations in the ground state of the system, representing the Bose-Einstein condensation of magnetoexcitons, consists of excitonic energy branches accompanied by plasmon satellites and pure plasma branches. It is important to note, that concentration corrections of excitonic branches of spectrum appear in the form of plasmon satellites and actually the system has exciton-plasmon branches and pure plasma branches of spectrum. Excitonic component of exciton-plasmon branches has an energy gap defined by the value of chemical potential, which in conditions of metastable dielectric liquid phase has negative values, depending on the filling factor. An energy gap in the spectrum results from the energy required for detachment of magnetic exciton from the composition of
Oliveira, Paulo Henrique de; Gonçalves, Carlos Alberto; de Paula, Edmar Aderson Mendes; Assis, Vivian Coelho
2013-01-01
Este artigo analisa as práticas de gestão do conhecimento e da inovação em uma franquia de uma importante empresa multinacional do setor de fast-food de Minas Gerais: a Subway. Como estratégia de pesquisa, utilizou-se um estudo de caso descritivo e os dados foram coletados por meio de uma entrevista em profundidade, realizada com o proprietário de quatro lojas dessa franquia, situadas em regiões estratégicas da cidade de Belo Horizonte. Os resultados demonstraram que os processos de criação, ...
A shape-based statistical method to retrieve 2D TRUS-MR slice correspondence for prostate biopsy
Mitra, Jhimli; Srikantha, Abhilash; Sidibé, Désiré; Martí, Robert; Oliver, Arnau; Lladó, Xavier; Ghose, Soumya; Vilanova, Joan C.; Comet, Josep; Meriaudeau, Fabrice
2012-02-01
This paper presents a method based on shape-context and statistical measures to match interventional 2D Trans Rectal Ultrasound (TRUS) slice during prostate biopsy to a 2D Magnetic Resonance (MR) slice of a pre-acquired prostate volume. Accurate biopsy tissue sampling requires translation of the MR slice information on the TRUS guided biopsy slice. However, this translation or fusion requires the knowledge of the spatial position of the TRUS slice and this is only possible with the use of an electro-magnetic (EM) tracker attached to the TRUS probe. Since, the use of EM tracker is not common in clinical practice and 3D TRUS is not used during biopsy, we propose to perform an analysis based on shape and information theory to reach close enough to the actual MR slice as validated by experts. The Bhattacharyya distance is used to find point correspondences between shape-context representations of the prostate contours. Thereafter, Chi-square distance is used to find out those MR slices where the prostates closely match with that of the TRUS slice. Normalized Mutual Information (NMI) values of the TRUS slice with each of the axial MR slices are computed after rigid alignment and consecutively a strategic elimination based on a set of rules between the Chi-square distances and the NMI leads to the required MR slice. We validated our method for TRUS axial slices of 15 patients, of which 11 results matched at least one experts validation and the remaining 4 are at most one slice away from the expert validations.
O amor em tempos de internet: as expectativas amorosas na rede social Badoo
Xavier, Maria Rita Pereira
2014-01-01
A pesquisa propõe-se a analisar o fenômeno dos relacionamentos amorosos através da observação da Rede Social Badoo. Como meio para atingir este objetivo, foram realizadas entrevistas qualitativas em profundidade on-line. O principal questionamento é entender como se configuram as expectativas amorosas na modernidade líquida. Agregado a isto ainda há como categorias de análise a visão sobre relacionamentos e as experiências amorosas proporcionadas pelo uso da Rede Social Badoo. ...
Functions of NKG2D in CD8+ T cells: an opportunity for immunotherapy.
Prajapati, Kushal; Perez, Cynthia; Rojas, Lourdes Beatriz Plaza; Burke, Brianna; Guevara-Patino, Jose A
2018-02-05
Natural killer group 2 member D (NKG2D) is a type II transmembrane receptor. NKG2D is present on NK cells in both mice and humans, whereas it is constitutively expressed on CD8 + T cells in humans but only expressed upon T-cell activation in mice. NKG2D is a promiscuous receptor that recognizes stress-induced surface ligands. In NK cells, NKG2D signaling is sufficient to unleash the killing response; in CD8 + T cells, this requires concurrent activation of the T-cell receptor (TCR). In this case, the function of NKG2D is to authenticate the recognition of a stressed target and enhance TCR signaling. CD28 has been established as an archetype provider of costimulation during T-cell priming. It has become apparent, however, that signals from other costimulatory receptors, such as NKG2D, are required for optimal T-cell function outside the priming phase. This review will focus on the similarities and differences between NKG2D and CD28; less well-described characteristics of NKG2D, such as the potential role of NKG2D in CD8 + T-cell memory formation, cancer immunity and autoimmunity; and the opportunities for targeting NKG2D in immunotherapy.Cellular and Molecular Immunology advance online publication, 5 February 2018; doi:10.1038/cmi.2017.161.
Regulating the electrical behaviors of 2D inorganic nanomaterials for energy applications.
Feng, Feng; Wu, Junchi; Wu, Changzheng; Xie, Yi
2015-02-11
Recent years have witnessed great developments in inorganic 2D nanomaterials for their unique dimensional confinement and diverse electronic energy bands. Precisely regulating their intrinsic electrical behaviors would bring superior electrical conductivity, rendering 2D nanomaterials ideal candidates for active materials in electrochemical applications when combined with the excellent reaction activity from the inorganic lattice. This Concept focuses on highly conducting inorganic 2D nanomaterials, including intrinsic metallic 2D nanomaterials and artificial highly conductive 2D nanomaterials. The intrinsic metallicity of 2D nanomaterials is derived from their closely packed atomic structures that ensure maximum overlapping of electron orbitals, while artificial highly conductive 2D nanomaterials could be achieved by designed methodologies of surface modification, intralayer ion doping, and lattice strain, in which atomic-scale structural modulation plays a vital role in realizing conducting behaviors. Benefiting from fast electron transfer, high reaction activity, as well as large surface areas arising from the 2D inorganic lattice, highly conducting 2D nanomaterials open up prospects for enhancing performance in electrochemical catalysis and electrochemical capacitors. Conductive 2D inorganic nanomaterials promise higher efficiency for electrochemical applications of energy conversion and storage. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
ATM-Dependent Phosphorylation of MEF2D Promotes Neuronal Survival after DNA Damage
Chan, Shing Fai; Sances, Sam; Brill, Laurence M.; Okamoto, Shu-ichi; Zaidi, Rameez; McKercher, Scott R.; Akhtar, Mohd W.; Nakanishi, Nobuki
2014-01-01
Mutations in the ataxia telangiectasia mutated (ATM) gene, which encodes a kinase critical for the normal DNA damage response, cause the neurodegenerative disorder ataxia-telangiectasia (AT). The substrates of ATM in the brain are poorly understood. Here we demonstrate that ATM phosphorylates and activates the transcription factor myocyte enhancer factor 2D (MEF2D), which plays a critical role in promoting survival of cerebellar granule cells. ATM associates with MEF2D after DNA damage and phosphorylates the transcription factor at four ATM consensus sites. Knockdown of endogenous MEF2D with a short-hairpin RNA (shRNA) increases sensitivity to etoposide-induced DNA damage and neuronal cell death. Interestingly, substitution of endogenous MEF2D with an shRNA-resistant phosphomimetic MEF2D mutant protects cerebellar granule cells from cell death after DNA damage, whereas an shRNA-resistant nonphosphorylatable MEF2D mutant does not. In vivo, cerebella in Mef2d knock-out mice manifest increased susceptibility to DNA damage. Together, our results show that MEF2D is a substrate for phosphorylation by ATM, thus promoting survival in response to DNA damage. Moreover, dysregulation of the ATM–MEF2D pathway may contribute to neurodegeneration in AT. PMID:24672010
Directory of Open Access Journals (Sweden)
Jimenez-Perez Miriam I
2012-02-01
Full Text Available Abstract Background Cervical cancer represents the third most commonly diagnosed cancer and the fourth leading cause of cancer-related deaths in women worldwide. Natural killer (NK cells play an important role in the defense against viruses, intracellular bacteria and tumors. NKG2D, an activating receptor on NK cells, recognizes MHC class I chain-related molecules, such as MICA/B and members of the ULBP/RAET1 family. Tumor-derived soluble NKG2D-ligands have been shown to down-modulate the expression of NKG2D on NK cells. In addition to the down-modulation induced by soluble NKG2D-ligands, it has recently been described that persistent cell-cell contact can also down-modulate NKG2D expression. The goal of this study was to determine whether the NKG2D receptor is down-modulated by cell-cell contact with cervical cancer cells and whether this down-modulation might be associated with changes in NK cell activity. Results We demonstrate that NKG2D expressed on NKL cells is down-modulated by direct cell contact with cervical cancer cell lines HeLa, SiHa, and C33A, but not with non-tumorigenic keratinocytes (HaCaT. Moreover, this down-modulation had functional implications. We found expression of NKG2D-ligands in all cervical cancer cell lines, but the patterns of ligand distribution were different in each cell line. Cervical cancer cell lines co-cultured with NKL cells or fresh NK cells induced a marked diminution of NKG2D expression on NKL cells. Additionally, the cytotoxic activity of NKL cells against K562 targets was compromised after co-culture with HeLa and SiHa cells, while co-culture with C33A increased the cytotoxic activity of the NKL cells. Conclusions Our results suggest that differential expression of NKG2D-ligands in cervical cancer cell lines might be associated with the down-modulation of NKG2D, as well as with changes in the cytotoxic activity of NKL cells after cell-cell contact with the tumor cells.
A jornada do herói em organizações do terceiro setor
Directory of Open Access Journals (Sweden)
Caroline Delevati Colpo
2016-12-01
Full Text Available Este estudo tem como objetivo identificar os heróis em organizações do terceiro setor, com base na análise realizada em três organizações do Rio Grande do Sul. Esta pesquisa exploratória qualitativa, utilizou-se de levantamento bibliográfico, observação participante, pesquisa documental e entrevistas em profundidade. Ao final desse processo, relacionou-se as trajetórias dos heróis com jornada do herói estudada por Joseph Campbell e conclui-se que uma mesma organização pode ter vários heróis.
Dorado, Pedro; González, Idilio; Naranjo, María Eugenia G; de Andrés, Fernando; Peñas-Lledó, Eva María; Calzadilla, Luis Ramón; LLerena, Adrián
2017-01-01
A long-standing question and dilemma in precision medicine is whether and to what extent genotyping or phenotyping drug metabolizing enzymes such as CYP2D6 can be used in real-life global clinical and societal settings. Although in an ideal world using both genotype and phenotype biomarkers are desirable, this is not always feasible for economic and practical reasons. Moreover, an additional barrier for clinical implementation of precision medicine is the lack of correlation between genotype and phenotype, considering that most of the current methods include only genotyping. Thus, the present study evaluated, using dextromethorphan as a phenotyping probe, the relationship between CYP2D6 phenotype and CYP2D6 genotype, especially for the ultrarapid metabolizer (UM) phenotype. We report in this study, to the best of our knowledge, the first comparative clinical pharmacogenomics study in a Cuban population sample (N = 174 healthy volunteers) and show that the CYP2D6 genotype is not a robust predictor of the CYP2D6 ultrarapid metabolizer (mUM) status in Cubans. Importantly, the ultrarapid CYP2D6 phenotype can result in a host of health outcomes, such as drug resistance associated with subtherapeutic drug concentrations, overexposure to active drug metabolites, and altered sensitivity to certain human diseases by virtue of altered metabolism of endogenous substrates of CYP2D6. Hence, phenotyping tests for CYP2D6 UMs appear to be a particular necessity for precision medicine in the Cuban population. Finally, in consideration of ethical and inclusive representation in global science, we recommend further precision medicine biomarker research and funding in support of neglected or understudied populations worldwide.
Ran, Jingrun; Guo, Weiwei; Wang, Hailong; Zhu, Bicheng; Yu, Jiaguo; Qiao, Shi-Zhang
2018-04-30
The generation of green hydrogen (H 2 ) energy using sunlight is of great significance to solve the worldwide energy and environmental issues. Particularly, photocatalytic H 2 production is a highly promising strategy for solar-to-H 2 conversion. Recently, various heterostructured photocatalysts with high efficiency and good stability have been fabricated. Among them, 2D/2D van der Waals (VDW) heterojunctions have received tremendous attention, since this architecture can promote the interfacial charge separation and transfer and provide massive reactive centers. On the other hand, currently, most photocatalysts are composed of metal elements with high cost, limited reserves, and hazardous environmental impact. Hence, the development of metal-free photocatalysts is desirable. Here, a novel 2D/2D VDW heterostructure of metal-free phosphorene/graphitic carbon nitride (g-C 3 N 4 ) is fabricated. The phosphorene/g-C 3 N 4 nanocomposite shows an enhanced visible-light photocatalytic H 2 production activity of 571 µmol h -1 g -1 in 18 v% lactic acid aqueous solution. This improved performance arises from the intimate electronic coupling at the 2D/2D interface, corroborated by the advanced characterizations techniques, e.g., synchrotron-based X-ray absorption near-edge structure, and theoretical calculations. This work not only reports a new metal-free phosphorene/g-C 3 N 4 photocatalyst but also sheds lights on the design and fabrication of 2D/2D VDW heterojunction for applications in catalysis, electronics, and optoelectronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Steuer, Andrea E; Schmidhauser, Corina; Tingelhoff, Eva H; Schmid, Yasmin; Rickli, Anna; Kraemer, Thomas; Liechti, Matthias E
2016-01-01
3,4-methylenedioxymethamphetamine (MDMA; ecstasy) metabolism is known to be stereoselective, with preference for S-stereoisomers. Its major metabolic step involves CYP2D6-catalyzed demethylenation to 3,4-dihydroxymethamphetamine (DHMA), followed by methylation and conjugation. Alterations in CYP2D6 genotype and/or phenotype have been associated with higher toxicity. Therefore, the impact of CYP2D6 function on the plasma pharmacokinetics of MDMA and its phase I and II metabolites was tested by comparing extensive metabolizers (EMs), intermediate metabolizers (IMs), and EMs that were pretreated with bupropion as a metabolic inhibitor in a controlled MDMA administration study. Blood plasma samples were collected from 16 healthy participants (13 EMs and three IMs) up to 24 h after MDMA administration in a double-blind, placebo-controlled, four-period, cross-over design, with subjects receiving 1 week placebo or bupropion pretreatment followed by a single placebo or MDMA (125 mg) dose. Bupropion pretreatment increased the maximum plasma concentration (Cmax) and area under the plasma concentration-time curve from 0 to 24 h (AUC24) of R-MDMA (9% and 25%, respectively) and S-MDMA (16% and 38%, respectively). Bupropion reduced the Cmax and AUC24 of the CYP2D6-dependently formed metabolite stereoisomers of DHMA 3-sulfate, DHMA 4-sulfate, and 4-hydroxy-3-methoxymethamphetamine (HMMA sulfate and HMMA glucuronide) by approximately 40%. The changes that were observed in IMs were generally comparable to bupropion-pretreated EMs. Although changes in stereoselectivity based on CYP2D6 activity were observed, these likely have low clinical relevance. Bupropion and hydroxybupropion stereoisomer pharmacokinetics were unaltered by MDMA co-administration. The present data might aid further interpretations of toxicity based on CYP2D6-dependent MDMA metabolism.
Directory of Open Access Journals (Sweden)
Andrea E Steuer
Full Text Available 3,4-methylenedioxymethamphetamine (MDMA; ecstasy metabolism is known to be stereoselective, with preference for S-stereoisomers. Its major metabolic step involves CYP2D6-catalyzed demethylenation to 3,4-dihydroxymethamphetamine (DHMA, followed by methylation and conjugation. Alterations in CYP2D6 genotype and/or phenotype have been associated with higher toxicity. Therefore, the impact of CYP2D6 function on the plasma pharmacokinetics of MDMA and its phase I and II metabolites was tested by comparing extensive metabolizers (EMs, intermediate metabolizers (IMs, and EMs that were pretreated with bupropion as a metabolic inhibitor in a controlled MDMA administration study. Blood plasma samples were collected from 16 healthy participants (13 EMs and three IMs up to 24 h after MDMA administration in a double-blind, placebo-controlled, four-period, cross-over design, with subjects receiving 1 week placebo or bupropion pretreatment followed by a single placebo or MDMA (125 mg dose. Bupropion pretreatment increased the maximum plasma concentration (Cmax and area under the plasma concentration-time curve from 0 to 24 h (AUC24 of R-MDMA (9% and 25%, respectively and S-MDMA (16% and 38%, respectively. Bupropion reduced the Cmax and AUC24 of the CYP2D6-dependently formed metabolite stereoisomers of DHMA 3-sulfate, DHMA 4-sulfate, and 4-hydroxy-3-methoxymethamphetamine (HMMA sulfate and HMMA glucuronide by approximately 40%. The changes that were observed in IMs were generally comparable to bupropion-pretreated EMs. Although changes in stereoselectivity based on CYP2D6 activity were observed, these likely have low clinical relevance. Bupropion and hydroxybupropion stereoisomer pharmacokinetics were unaltered by MDMA co-administration. The present data might aid further interpretations of toxicity based on CYP2D6-dependent MDMA metabolism.
Directory of Open Access Journals (Sweden)
Cecília G. Leal
2013-09-01
Full Text Available O presente estudo teve como objetivo investigar os padrões local e regional de uso de habitat de Piabina argentea Reinhardt, 1867 em quatro diferentes rios da bacia do rio das Velhas. Os habitat amostrados foram caracterizados quanto à velocidade da água, profundidade e tipo de substrato. Para a análise ecomorfológica, foram calculados 17 atributos ecomorfológicos de 40 exemplares de cada rio. Embora estas populações tenham se sobreposto no espaço ecomorfológico, a Análise Discriminante Canônica mostrou haver diferença significativa entre elas, principalmente da população do rio das Velhas em relação às demais. A separação se deu em termos do índice de compressão, altura relativa do corpo e índice de achatamento ventral. Os padrões locais de seleção de habitat não foram congruentes em todos os rios, mas em geral, houve predomínio do padrão regional: habitat lênticos, profundidade entre 20 e 40 cm e 60 e 80 cm e substrato areia, silte+argila e banco de folhas. Considerando as características físicas de cada rio e o padrão regional da espécie, a maior parte dos seus requerimentos de habitat é contemplada nos quatro rios. Entretanto, um corpo d'água assoreado como o trecho do rio das Velhas, tende a ter maiores velocidades da água, menores profundidades e substrato finos, o que atende em parte à seleção de habitat da espécie estudada.
Garrido Izard, Miguel
2011-01-01
La agricultura de precisión se trata de una técnica basada en la medición de la variabilidad espacial y/o temporal de los diferentes parámetros del proceso productivo agrícola para la elaboración de una estrategia de manejo específico que permitan incrementar la eficacia productiva. La combinación de esta técnica con una siembra directa supondría una gran mejoría en cuanto a la posibilidad de alcanzar una estabilidad en la profundidad de siembra directa, adaptándose la sembradora a las condi...
Directory of Open Access Journals (Sweden)
M. C. Gonçalves
2007-07-01
Full Text Available Entre 2001 e 2004 procedeu-se à monitorização dos teores de água e dos catiões solúveis Na+, Ca2+ e Mg2+, às profundidades de 10, 30, 50 e 70 cm, em três monólitos de solo (1.2 m² x 1.0 m de profundidade, construídos num Aluviossolo de textura mediana, situado em Alvalade de Sado, visando o estudo da evolução da salinização e da sodicização do solo em função de diferentes qualidades de água de rega aplicadas. Os monólitos, cobertos com vegetação natural, foram regados manualmente (10 mm por aplicação, durante o ciclo de rega da região (500 mm e sujeito à lava-gem pela chuva (entre 388 e 570 mm/ano durante o período remanescente do ano. As águas de rega inicialmente aplicadas apresentavam uma CE de 0.4, 0.8 e 1.6 dS m-1 e um valor de SAR de 1, 3 e 6 (meq L-10,5, designadas de A, B e C, respectivamente, mantendo sempre uma relação Ca:Mg = 1:2. No 3º e 4º anos optou-se por aumentar a CE das águas de rega para 0.8, 1,6 e 3.2 dS m-1, mantendo o respectivo equilíbrio entre os catiões. O teor de água no solo foi monitorizado às 4 profundidades por TDR e a solução de solo foi amostrada recorrendo a cápsulas porosas instaladas às mesmas profundidades. Foi monitorizada a evolução dos teores de água e de Na+, Ca2+ e Mg2+ solúveis, da condutividade eléctrica (CE, da razão de adsorção de sódio (SAR e da percentagem de sódio de troca (ESP nos três monólitos, às quatro profundidades e ao longo dos 4 anos de ensaio. A modelação dos processos envolvidos foi efectuada recorrendo ao modelo HYDRUS-1D, o qual se mostrou adequado à simulação dos resultados experimentais. A análise entre os valores medidos e simulados foi feita com recurso à análise de regressão simples, forçada à origem. As equações obtidas apresentaram coeficientes de regressão próximos de 1 e coeficientes de determinação elevados, variando entre 0.985 para o teor de água e 0.797 para o cálcio solúvel. Pode-se considerar que
Analysis of chronic aortic regurgitation by 2D and 3D echocardiography and cardiac MRI
DEFF Research Database (Denmark)
Stoebe, Stephan; Metze, Michael; Jurisch, Daniel
2018-01-01
) were assessed retrospectively by 2D, 3D echocardiography and cMRI in 55 chronic AR patients. Semi-quantitative parameters were assessed by 2D echocardiography. RESULTS: 22 (40%) patients had mild, 25 (46%) moderate and 8 (14%) severe AR. The quantitative volumetric approach was feasible using 2D, 3D...... echocardiography and cMRI, whereas the feasibility of semi-quantitative parameters varied considerably. LV volume (LVEDV, LVESV, SVtot) analyses showed good correlations between the different imaging modalities, although significantly increased LV volumes were assessed by cMRI. RVol was significantly different...... between 2D/3D echocardiography and 2D echocardiography/cMRI but was not significantly different between 3D echocardiography/cMRI. RF was not statistically different between 2D echocardiography/cMRI and 3D echocardiography/cMRI showing poor correlations (r
Band shift of 2D transition-metal dichalcogenide alloys: size and composition effects
Zhao, Yipeng; Zhang, Zhe; Ouyang, Gang
2018-04-01
Band engineering of 2D transition-metal dichalcogenides (2D-TMDs) is a vital task for their applications in electronic and optoelectronic nanodevices. In this study, we investigate the joint effect from size and composition contributions on the band shift of 2D-TMD alloys in terms of atomic bond relaxation consideration. A theoretical model is proposed to pursue the underlying mechanism, which can connect the band offset with the atomic bonding identities in the 2D-TMD alloys. We reveal that the bandgap of 2D-TMD alloys presents a bowing shape owing to the size-dependent interaction among atoms and shows blue shift or red shift due to different intermixing of components. It is demonstrated that both size and composition can be performed as the useful methods to modulate the band shift, which suggests an effective way to realize the desirable properties of 2D-TMD alloys.
Multiple-canister flow and transport code in 2-dimensional space. MCFT2D: user's manual
International Nuclear Information System (INIS)
Lim, Doo-Hyun
2006-03-01
A two-dimensional numerical code, MCFT2D (Multiple-Canister Flow and Transport code in 2-Dimensional space), has been developed for groundwater flow and radionuclide transport analyses in a water-saturated high-level radioactive waste (HLW) repository with multiple canisters. A multiple-canister configuration and a non-uniform flow field of the host rock are incorporated in the MCFT2D code. Effects of heterogeneous flow field of the host rock on migration of nuclides can be investigated using MCFT2D. The MCFT2D enables to take into account the various degrees of the dependency of canister configuration for nuclide migration in a water-saturated HLW repository, while the dependency was assumed to be either independent or perfectly dependent in previous studies. This report presents features of the MCFT2D code, numerical simulation using MCFT2D code, and graphical representation of the numerical results. (author)
The SH2D2A gene and susceptibility to multiple sclerosis
DEFF Research Database (Denmark)
Lorentzen, A.R.; Smestad, C.; Lie, B.A.
2008-01-01
We previously reported an association between the SH2D2A gene encoding TSAd and multiple sclerosis (MS). Here a total of 2128 Nordic MS patients and 2004 controls were genotyped for the SH2D2A promoter GA repeat polymorphism and rs926103 encoding a serine to asparagine substitution at amino acid...... that the SH2D2A gene may contribute to susceptibility to MS Udgivelsesdato: 2008/7/15...
Penyelesaian Persamaan Poisson 2D dengan Menggunakan Metode Gauss-Seidel dan Conjugate Gradien
Mahmudah, Dewi Erla; Naf'an, Muhammad Zidny
2017-01-01
In this paper we focus on solution of 2D Poisson equation numerically. 2D Poisson equation is a partial differential equation of second order elliptical type. This equation is a particular form or non-homogeneous form of the Laplace equation. The solution of 2D Poisson equation is performed numerically using Gauss Seidel method and Conjugate Gradient method. The result is the value using Gauss Seidel method and Conjugate Gradient method is same. But, consider the iteration process, the conver...
2D:4D digit ratio predicts delay of gratification in preschoolers.
Directory of Open Access Journals (Sweden)
Sergio Da Silva
Full Text Available We replicate the Stanford marshmallow experiment with a sample of 141 preschoolers and find a correlation between lack of self-control and 2D:4D digit ratio. Children with low 2D:4D digit ratio are less likely to delay gratification. Low 2D:4D digit ratio may indicate high fetal testosterone. If this hypothesis is true, our finding means high fetal testosterone children are less likely to delay gratification.
The Implementation of C-ID, R2D2 Model on Learning Reading Comprehension
Rayanto, Yudi Hari; Rusmawan, Putu Ngurah
2016-01-01
The purposes of this research are to find out, (1) whether C-ID, R2D2 model is effective to be implemented on learning Reading comprehension, (2) college students' activity during the implementation of C-ID, R2D2 model on learning Reading comprehension, and 3) college students' learning achievement during the implementation of C-ID, R2D2 model on…
Comparison of 2D and 3D Vision Gaze with Simultaneous Measurements of Accommodation and Convergence
Hori, Hiroki; Shiomi, Tomoki; Hasegawa, Satoshi; Takada, Hiroki; Omori, Masako; Matsuura, Yasuyuki; Ishio, Hiromu; Miyao, Masaru
2014-01-01
Accommodation and convergence were measured simultaneously while subjects viewed 2D and 3D images. The aim was to compare fixation distances between accommodation and convergence in young subjects while they viewed 2D and 3D images. Measurements were made three times, 40 seconds each, using 2D and 3D images. The result suggests that ocular functions during viewing of 3D images are very similar to those during natural viewing. Previously established and widely used theories, such that within a...
Dose-response relationships of propranolol in Chinese subjects with different CYP2D6 genotypes.
Huang, Chin-Wei; Lai, Ming-Liang; Lin, Min-Shung; Lee, Hwei-Ling; Huang, Jin-Ding
2003-01-01
For clinical treatment, a smaller dosage of propranolol is often used among Chinese people. Propranolol is metabolized by polymorphic CYP2D6. We postulate that the lower propranolol dosage in Chinese is due to a slower CYP2D6 metabolism. A majority of the Chinese population has the nucleotide T188 in the CYP2D6 gene (CYP2D6*10) instead of C188 (CYP2D6*1), which most white subjects have. Chinese subjects of different CYP2D6*1/CYP2D6*10 genotypes have been shown to have different propranolol pharmacokinetic characteristics. In this study, we compared the beta-blockade effects of propranolol in Chinese subjects of the two different CYP2D6 genotypes. Based on the nucleotide 188 genotypes, two groups of 10 healthy subjects each were selected. Each subject was given a 10-, 20-, or 40-mg rac-propranolol tablet three times a day for 3 days in 3 different phases. Heart rate and blood pressure were measured in both supine and upright positions. The heart rate was also determined during treadmill exercise test. Plasma concentration of S-propranolol at 2 hrs after the last-dose administration was measured. Despite therebeing higher S-propranolol plasma concentration in CYP2D6*10 subjects than in CYP2D6*1 subjects at 10- and 20-mg dosage, the dose-response relationship was not significantly different in these subjects. Our results do not support the hypothesis that CYP2D6*1/CYP2D6*10 polymorphism may affect the beta-blockade effect of propranolol in Chinese subjects.
Volumetric Synthetic Aperture Imaging with a Piezoelectric 2-D Row-Column Probe
DEFF Research Database (Denmark)
Bouzari, Hamed; Engholm, Mathias; Christiansen, Thomas Lehrmann
2016-01-01
The synthetic aperture (SA) technique can be used for achieving real-time volumetric ultrasound imaging using 2-D row-column addressed transducers. This paper investigates SA volumetric imaging performance of an in-house prototyped 3 MHz λ/2-pitch 62+62 element piezoelectric 2-D row-column addres......The synthetic aperture (SA) technique can be used for achieving real-time volumetric ultrasound imaging using 2-D row-column addressed transducers. This paper investigates SA volumetric imaging performance of an in-house prototyped 3 MHz λ/2-pitch 62+62 element piezoelectric 2-D row...
Electric field effect in multilayer Cr2Ge2Te6: a ferromagnetic 2D material
Xing, Wenyu; Chen, Yangyang; Odenthal, Patrick M.; Zhang, Xiao; Yuan, Wei; Su, Tang; Song, Qi; Wang, Tianyu; Zhong, Jiangnan; Jia, Shuang; Xie, X. C.; Li, Yan; Han, Wei
2017-06-01
The emergence of two-dimensional (2D) materials has attracted a great deal of attention due to their fascinating physical properties and potential applications for future nano-electronic devices. Since the first isolation of graphene, a Dirac material, a large family of new functional 2D materials have been discovered and characterized, including insulating 2D boron nitride, semiconducting 2D transition metal dichalcogenides and black phosphorus, and superconducting 2D bismuth strontium calcium copper oxide, molybdenum disulphide and niobium selenide, etc. Here, we report the identification of ferromagnetic thin flakes of Cr2Ge2Te6 (CGT) with thickness down to a few nanometers, which provides a very important piece to the van der Waals structures consisting of various 2D materials. We further demonstrate the giant modulation of the channel resistance of 2D CGT devices via electric field effect. Our results illustrate the gate voltage tunability of 2D CGT and the potential of CGT, a ferromagnetic 2D material, as a new functional quantum material for applications in future nanoelectronics and spintronics.
The Relationship Between Digit Ratio (2D:4D) and Sexual Orientation in Men from China.
Xu, Yin; Zheng, Yong
2016-04-01
We examined the relationship between 2D:4D digit ratio and sexual orientation in men from China and analyzed the influences of the components used to assess sexual orientation and the criteria used to classify individuals as homosexual on this relationship. A total of 309 male and 110 female participants took part in a web-based survey. Our results showed that heterosexual men had a significantly lower 2D:4D than heterosexual women and exclusively homosexual men had a significantly higher left 2D:4D than heterosexual men whereas only exclusively homosexual men had a significantly higher right 2D:4D than heterosexual men when sexual orientation was assessed via sexual attraction. The left 2D:4D showed a significant positive correlation with sexual identity, sexual attraction, and sexual behavior, and the right 2D:4D showed a significant positive correlation with sexual attraction. The effect sizes for differences in 2D:4D between homosexual and heterosexual men varied according to criteria used to classify individuals as homosexual and sexual orientation components; the more stringent the criteria (scores closer to the homosexual category), the larger the effect sizes; further, sexual attraction yielded the largest effect size. There were no significant effects of age and latitude on Chinese 2D:4D. This study contributes to the current understanding of the relationship between 2D:4D and male sexual orientation.
Highly Enhanced Many-Body Interactions in Anisotropic 2D Semiconductors.
Sharma, Ankur; Yan, Han; Zhang, Linglong; Sun, Xueqian; Liu, Boqing; Lu, Yuerui
2018-05-15
Atomically thin two-dimensional (2D) semiconductors have presented a plethora of opportunities for future optoelectronic devices and photonics applications, made possible by the strong light matter interactions at the 2D quantum limit. Many body interactions between fundamental particles in 2D semiconductors are strongly enhanced compared with those in bulk semiconductors because of the reduced dimensionality and, thus, reduced dielectric screening. These enhanced many body interactions lead to the formation of robust quasi-particles, such as excitons, trions, and biexcitons, which are extremely important for the optoelectronics device applications of 2D semiconductors, such as light emitting diodes, lasers, and optical modulators, etc. Recently, the emerging anisotropic 2D semiconductors, such as black phosphorus (termed as phosphorene) and phosphorene-like 2D materials, such as ReSe 2 , 2D-perovskites, SnS, etc., show strong anisotropic optical and electrical properties, which are different from conventional isotropic 2D semiconductors, such as transition metal dichalcogenide (TMD) monolayers. This anisotropy leads to the formation of quasi-one-dimensional (quasi-1D) excitons and trions in a 2D system, which results in even stronger many body interactions in anisotropic 2D materials, arising from the further reduced dimensionality of the quasi-particles and thus reduced dielectric screening. Many body interactions have been heavily investigated in TMD monolayers in past years, but not in anisotropic 2D materials yet. The quasi-particles in anisotropic 2D materials have fractional dimensionality which makes them perfect candidates to serve as a platform to study fundamental particle interactions in fractional dimensional space. In this Account, we present our recent progress related to 2D phosphorene, a 2D system with quasi-1D excitons and trions. Phosphorene, because of its unique anisotropic properties, provides a unique 2D platform for investigating the
Noise suppression system of OCDMA with spectral/spatial 2D hybrid code
Matem, Rima; Aljunid, S. A.; Junita, M. N.; Rashidi, C. B. M.; Shihab Aqrab, Israa
2017-11-01
In this paper, we propose a novel 2D spectral/spatial hybrid code based on 1D ZCC and 1D MD where the both present a zero cross correlation property analyzed and the influence of the noise of optical as Phase Induced Intensity Noise (PIIN), shot and thermal noise. This new code is shown effectively to mitigate the PIIN and suppresses MAI. Using 2D ZCC/MD code the performance of the system can be improved in term of as well as to support more simultaneous users compared of the 2D FCC/MDW and 2D DPDC codes.
Noise suppression system of OCDMA with spectral/spatial 2D hybrid code
Directory of Open Access Journals (Sweden)
Matem Rima
2017-01-01
Full Text Available In this paper, we propose a novel 2D spectral/spatial hybrid code based on 1D ZCC and 1D MD where the both present a zero cross correlation property analyzed and the influence of the noise of optical as Phase Induced Intensity Noise (PIIN, shot and thermal noise. This new code is shown effectively to mitigate the PIIN and suppresses MAI. Using 2D ZCC/MD code the performance of the system can be improved in term of as well as to support more simultaneous users compared of the 2D FCC/MDW and 2D DPDC codes.
The role of the cytoskeleton in cellular force generation in 2D and 3D environments
International Nuclear Information System (INIS)
Kraning-Rush, Casey M; Carey, Shawn P; Califano, Joseph P; Smith, Brooke N; Reinhart-King, Cynthia A
2011-01-01
To adhere and migrate, cells generate forces through the cytoskeleton that are transmitted to the surrounding matrix. While cellular force generation has been studied on 2D substrates, less is known about cytoskeletal-mediated traction forces of cells embedded in more in vivo-like 3D matrices. Recent studies have revealed important differences between the cytoskeletal structure, adhesion, and migration of cells in 2D and 3D. Because the cytoskeleton mediates force, we sought to directly compare the role of the cytoskeleton in modulating cell force in 2D and 3D. MDA-MB-231 cells were treated with agents that perturbed actin, microtubules, or myosin, and analyzed for changes in cytoskeletal organization and force generation in both 2D and 3D. To quantify traction stresses in 2D, traction force microscopy was used; in 3D, force was assessed based on single cell-mediated collagen fibril reorganization imaged using confocal reflectance microscopy. Interestingly, even though previous studies have observed differences in cell behaviors like migration in 2D and 3D, our data indicate that forces generated on 2D substrates correlate with forces within 3D matrices. Disruption of actin, myosin or microtubules in either 2D or 3D microenvironments disrupts cell-generated force. These data suggest that despite differences in cytoskeletal organization in 2D and 3D, actin, microtubules and myosin contribute to contractility and matrix reorganization similarly in both microenvironments
Energy Technology Data Exchange (ETDEWEB)
Wang, Yuxian [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Department of Chemical Engineering, Curtin University, GPO Box U1987, Perth, WA 6845 (Australia); Xie, Yongbing, E-mail: ybxie@ipe.ac.cn [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Sun, Hongqi [Department of Chemical Engineering, Curtin University, GPO Box U1987, Perth, WA 6845 (Australia); Xiao, Jiadong; Cao, Hongbin [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Wang, Shaobin, E-mail: shaobin.wang@curtin.edu.au [Department of Chemical Engineering, Curtin University, GPO Box U1987, Perth, WA 6845 (Australia)
2016-01-15
Highlights: • 2D γ-MnO{sub 2}/2D rGO hybrids (MnO{sub 2}/rGO) via a facile hydrothermal route were prepared. • MnO{sub 2}/rGO exhibits high activity in catalytic ozonation of 4-nitrophenol. • ·O{sub 2}{sup ̄} and {sup 1}O{sub 2} are the major radicals for 4-nitrophenol degradation and mineralization. • A synergistic effect of ozonation and peroxymonosulfate oxidation was evaluated. - Abstract: Two-dimensional reduced graphene oxide (2D rGO) was employed as both a shape-directing medium and support to fabricate 2D γ-MnO{sub 2}/2D rGO nano-hybrids (MnO{sub 2}/rGO) via a facile hydrothermal route. For the first time, the 2D/2D hybrid materials were used for catalytic ozonation of 4-nitrophenol. The catalytic efficiency of MnO{sub 2}/rGO was much higher than either MnO{sub 2} or rGO only, and rGO was suggested to play the role for promoting electron transfers. Quenching tests using tert-butanol, p-benzoquinone, and sodium azide suggested that the major radicals responsible for 4-nitrophenol degradation and mineralization are O{sub 2}{sup ̄} and {sup 1}O{sub 2}, but not ·OH. Reusability tests demonstrated a high stability of the materials in catalytic ozonation with minor Mn leaching below 0.5 ppm. Degradation mechanism, reaction kinetics, reusability and a synergistic effect between catalytic ozonation and coupling peroxymonosulfate (PMS) activation were also discussed.
2-D or 3-D Mammography?: The Future of Breast Cancer Detection | NIH MedlinePlus the Magazine
... Future of Breast Cancer Detection Follow us 2-D or 3-D Mammography?: The Future of Breast Cancer Detection NIH- ... will test two types of imaging tools—2-D and 3-D mammography. 2-D mammography takes ...
Lacava, C.; Carrol, L.; Bozzola, A.; Marchetti, R.; Minzioni, P.; Cristiani, I.; Fournier, M.; Bernabe, S.; Gerace, D.; Andreani, L. C.
2016-03-01
We present the characterization of Silicon-on-insulator (SOI) photonic-crystal based 2D grating-couplers (2D-GCs) fabricated by CEA-Leti in the frame of the FP7 Fabulous project, which is dedicated to the realization of devices and systems for low-cost and high-performance passives-optical-networks. On the analyzed samples different test structures are present, including 2D-GC connected to another 2D-GC by different waveguides (in a Mach-Zehnder like configuration), and 2D-GC connected to two separate 2D-GCs, so as to allow a complete assessment of different parameters. Measurements were carried out using a tunable laser source operating in the extended telecom bandwidth and a fiber-based polarization controlling system at the input of device-under-test. The measured data yielded an overall fiber-to-fiber loss of 7.5 dB for the structure composed by an input 2D-GC connected to two identical 2D-GCs. This value was obtained at the peak wavelength of the grating, and the 3-dB bandwidth of the 2D-GC was assessed to be 43 nm. Assuming that the waveguide losses are negligible, so as to make a worst-case analysis, the coupling efficiency of the single 2D-GC results to be equal to -3.75 dB, constituting, to the best of our knowledge, the lowest value ever reported for a fully CMOS compatible 2D-GC. It is worth noting that both the obtained values are in good agreement with those expected by the numerical simulations performed using full 3D analysis by Lumerical FDTD-solutions.
Xiong, Wei; Laaser, Jennifer E; Mehlenbacher, Randy D; Zanni, Martin T
2011-12-27
In the last ten years, two-dimensional infrared spectroscopy has become an important technique for studying molecular structures and dynamics. We report the implementation of heterodyne detected two-dimensional sum-frequency generation (HD 2D SFG) spectroscopy, which is the analog of 2D infrared (2D IR) spectroscopy, but is selective to noncentrosymmetric systems such as interfaces. We implement the technique using mid-IR pulse shaping, which enables rapid scanning, phase cycling, and automatic phasing. Absorptive spectra are obtained, that have the highest frequency resolution possible, from which we extract the rephasing and nonrephasing signals that are sometimes preferred. Using this technique, we measure the vibrational mode of CO adsorbed on a polycrystalline Pt surface. The 2D spectrum reveals a significant inhomogenous contribution to the spectral line shape, which is quantified by simulations. This observation indicates that the surface conformation and environment of CO molecules is more complicated than the simple "atop" configuration assumed in previous work. Our method can be straightforwardly incorporated into many existing SFG spectrometers. The technique enables one to quantify inhomogeneity, vibrational couplings, spectral diffusion, chemical exchange, and many other properties analogous to 2D IR spectroscopy, but specifically for interfaces.
Novel SNPs polymorphism of bovine CACNA2D1 gene and their ...
African Journals Online (AJOL)
In this study, the bovine CACNA2D1 gene was taken as a candidate gene for mastitis resistance. The objective of this study was to identify single nucleotide polymorphisms (SNPs) in the bovine CACNA2D1 gene and evaluate the association of these SNPs with mastitis in cattle. Through DNA sequencing and PCR-RFLP ...
2D-dynamic representation of DNA sequences as a graphical tool in bioinformatics
Bielińska-WaÌ§Ż, D.; WaÌ§Ż, P.
2016-10-01
2D-dynamic representation of DNA sequences is briefly reviewed. Some new examples of 2D-dynamic graphs which are the graphical tool of the method are shown. Using the examples of the complete genome sequences of the Zika virus it is shown that the present method can be applied for the study of the evolution of viral genomes.
2D:4D in Men Is Related to Aggressive Dominance but Not to Sociable Dominance
van der Meij, L.; Almela, M.; Buunk, A.P.; Dubbs, S.; Salvador, A.
2012-01-01
It has been shown that a smaller ratio between the length of the second and fourth digit (2D:4D) is an indicator of the exposure to prenatal testosterone (T). This study measured the 2D:4D of men and assessed dominance as a personality trait to investigate indirectly if the exposure to prenatal T is
2D : 4D in Men Is Related to Aggressive Dominance but Not to Sociable Dominance
van der Meij, Leander; Almela, Mercedes; Buunk, Abraham P.; Dubbs, Shelli; Salvador, Alicia
2012-01-01
It has been shown that a smaller ratio between the length of the second and fourth digit (2D:4D) is an indicator of the exposure to prenatal testosterone (T). This study measured the 2D:4D of men and assessed dominance as a personality trait to investigate indirectly if the exposure to prenatal T is
Efficient 2-D DCT Computation from an Image Representation Point of View
Papakostas, G.A.; Koulouriotis, D.E.; Karakasis, E.G.
2009-01-01
A novel methodology that ensures the computation of 2-D DCT coefficients in gray-scale images as well as in binary ones, with high computation rates, was presented in the previous sections. Through a new image representation scheme, called ISR (Image Slice Representation) the 2-D DCT coefficients can be computed in significantly reduced time, with the same accuracy.
A nodal Grean's function method of reactor core fuel management code, NGCFM2D
International Nuclear Information System (INIS)
Li Dongsheng; Yao Dong.
1987-01-01
This paper presents the mathematical model and program structure of the nodal Green's function method of reactor core fuel management code, NGCFM2D. Computing results of some reactor cores by NGCFM2D are analysed and compared with other codes
Multifunctional Cellular Materials Based on 2D Nanomaterials: Prospects and Challenges.
Qiu, Ling; He, Zijun; Li, Dan
2018-01-01
Recent advances in emerging 2D nanomaterial-based cellular materials (2D-CMs) open up new opportunities for the development of next generation cellular solids with exceptional properties. Herein, an overview of the current research status of 2D-CMs is provided and their future opportunities are highlighted. First, the unique features of 2D nanomaterials are introduced to illustrate why these nanoscale building blocks are promising for the development of novel cellular materials and what the new features of 2D nanoscale building blocks can offer when compared to their 0D and 1D counterparts. An in-depth discussion on the structure-property relationships of 2D-CMs is then provided, and the remarkable functions that can be achieved by engineering their cellular architecture are highlighted. Additionally, the use of 2D-CMs to tackle key challenges in different practical applications is demonstrated. In conclusion, a personal perspective on the challenges and future research directions of 2D-CMs is given. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Glass formation via structural fragmentation of a 2D coordination network.
Umeyama, D; Funnell, N P; Cliffe, M J; Hill, J A; Goodwin, A L; Hijikata, Y; Itakura, T; Okubo, T; Horike, S; Kitagawa, S
2015-08-18
The structure of a glass obtained by the melt quenching of a two-dimensional (2D) coordination network was examined. X-ray analyses disclosed a 2D-to-0D structural transformation before and after glass formation. The mechanism is unique to coordination compounds, as it is characterized by labile and flexible coordination bonds.
Recent Developments in 2D Nanomaterials for Chemiresistive-Type Gas Sensors
Choi, Seon-Jin; Kim, Il-Doo
2018-03-01
Two-dimensional (2D) nanostructures are gaining tremendous interests due to the fascinating physical, chemical, electrical, and optical properties. Recent advances in 2D nanomaterials synthesis have contributed to optimization of various parameters such as physical dimension and chemical structure for specific applications. In particular, development of high performance gas sensors is gaining vast importance for real-time and on-site environmental monitoring by detection of hazardous chemical species. In this review, we comprehensively report recent achievements of 2D nanostructured materials for chemiresistive-type gas sensors. Firstly, the basic sensing mechanism is described based on charge transfer behavior between gas species and 2D nanomaterials. Secondly, diverse synthesis strategies and characteristic gas sensing properties of 2D nanostructures such as graphene, metal oxides, transition metal dichalcogenides (TMDs), metal organic frameworks (MOFs), phosphorus, and MXenes are presented. In addition, recent trends in synthesis of 2D heterostructures by integrating two different types of 2D nanomaterials and their gas sensing properties are discussed. Finally, this review provides perspectives and future research directions for gas sensor technology using various 2D nanomaterials.
Joint DOA and Fundamental Frequency Estimation Methods based on 2-D Filtering
DEFF Research Database (Denmark)
Jensen, Jesper Rindom; Christensen, Mads Græsbøll; Jensen, Søren Holdt
2010-01-01
of the fundamental frequency and the DOA of spatio-temporarily sampled periodic signals. The ﬁrst and simplest method is based on the 2-D periodogram, whereas the second method is a generalization of the 2-D Capon method. In the experimental part, both qualitative and quantitative measurements show that the proposed...
76 FR 30819 - Special Conditions: Turbomeca Arriel 2D Turboshaft Engine
2011-05-27
... Conditions No. 33-009-SC] Special Conditions: Turbomeca Arriel 2D Turboshaft Engine AGENCY: Federal Aviation... Turbomeca SA model Arriel 2D engines. The engine model will have a novel or unusual design feature which is... contact Marc Bouthillier, ANE-111, Engine and Propeller Directorate, Aircraft Certification Service, 12...
Applications of 2D to 3D conversion for educational purposes
Koido, Yoshihisa; Morikawa, Hiroyuki; Shiraishi, Saki; Takeuchi, Soya; Maruyama, Wataru; Nakagori, Toshio; Hirakata, Masataka; Shinkai, Hirohisa; Kawai, Takashi
2013-03-01
There are three main approaches creating stereoscopic S3D content: stereo filming using two cameras, stereo rendering of 3D computer graphics, and 2D to S3D conversion by adding binocular information to 2D material images. Although manual "off-line" conversion can control the amount of parallax flexibly, 2D material images are converted according to monocular information in most cases, and the flexibility of 2D to S3D conversion has not been exploited. If the depth is expressed flexibly, comprehensions and interests from converted S3D contents are anticipated to be differed from those from 2D. Therefore, in this study we created new S3D content for education by applying 2D to S3D conversion. For surgical education, we created S3D surgical operation content under a surgeon using a partial 2D to S3D conversion technique which was expected to concentrate viewers' attention on significant areas. And for art education, we converted Ukiyoe prints; traditional Japanese artworks made from a woodcut. The conversion of this content, which has little depth information, into S3D, is expected to produce different cognitive processes from those evoked by 2D content, e.g., the excitation of interest, and the understanding of spatial information. In addition, the effects of the representation of these contents were investigated.
2D-Zernike Polynomials and Coherent State Quantization of the Unit Disc
Energy Technology Data Exchange (ETDEWEB)
Thirulogasanthar, K., E-mail: santhar@gmail.com [Concordia University, Department of Comuter Science and Software Engineering (Canada); Saad, Nasser, E-mail: nsaad@upei.ca [University of Prince Edward Island, Department of mathematics and Statistics (Canada); Honnouvo, G., E-mail: g-honnouvo@yahoo.fr [McGill University, Department of Mathematics and Statistics (Canada)
2015-12-15
Using the orthonormality of the 2D-Zernike polynomials, reproducing kernels, reproducing kernel Hilbert spaces, and ensuring coherent states attained. With the aid of the so-obtained coherent states, the complex unit disc is quantized. Associated upper symbols, lower symbols and related generalized Berezin transforms also obtained. A number of necessary summation formulas for the 2D-Zernike polynomials proved.
DEFF Research Database (Denmark)
Thygesen, Kristian Sommer
2017-01-01
and quasiparticle band structures in 2D materials and their heterostructures. The general theory is illustrated by applications to various types of 2D materials including transition metal dichalcogenides, graphene, phosphorene, and hexagonal boron nitride. The weak and highly non-local dielectric function...