WorldWideScience

Sample records for profile poland electronic

  1. Free Electron Laser in Poland

    CERN Document Server

    Romaniuk, Ryszard

    2009-01-01

    The idea of building a new IVth generation of light sources of high luminosity, which use accelerators, arose in the 80ties of XXth century. Now, in a numerable synchrotron and laser laboratories in Europe, there is carried out, since a couple of years, intense applied research on free electron lasers (FEL) [17,18]. Similarly, in this country, free electron laser in Poland – POLFEL [9] is, in a design, a coherent light source of the IVth generation, characterized by very short pulses in the range of 10-100fs, of big power 0,2GW and UV wavelength of 27nm, of average power 1W, with effective high power third harmonic of 9nm. The laser consists of a linear superconducting accelerator 100m in length, undulator and experimental lines. It generates a monochromatic and coherent radiation and can be tuned from THz range via IR, visible to UV, and potentially to X-rays. The linac works in quasi-CW or real-CW mode. It is planned by IPJ [9,10] and XFEL-Poland Consortium [16] as a part of the ESFRI [1] priority EuroFEL...

  2. Country policy profile - Poland. December 2015

    International Nuclear Information System (INIS)

    2015-12-01

    According to the Directive 2009/28/EC of the European Parliament and of the European Council on the promotion of the use of energy from renewable sources the target for the share of energy from renewable sources in gross final energy consumption in the year 2020 for Poland is 15%. Poland promotes renewable electricity through a quota system, tax relief and subsidies, as well as loans. There are three subsidy models and a loan scheme, which support heat generated from renewable energy sources. In dimension to transport renewable energy is promoted primarily by bio-fuels. The Republic of Poland established two programmes for renewable energy plants: a training programme, which is dedicated to installers in RES sector and certification system pertaining solar thermal installations. This report monitors the policy changes after the release of the 2013 Progress Report for Poland and was regularly updated (updated until December 2015)

  3. Chinese Tourists in Cracow, Poland: Their Profile, Expectations, and Perceptions

    Directory of Open Access Journals (Sweden)

    Guszkiewicz Paulina

    2017-03-01

    Full Text Available Introduction. In 2012, China became the largest spender in international tourism, benefiting many destinations worldwide. Even if for Poland it is not an important source market yet, the Polish authorities have undertaken some marketing activities in China. The main aim of the paper is to explore the profile, motivations, and perceptions of the Chinese tourists visiting Cracow. The secondary aim is to check the effectiveness of the marketing efforts dedicated to the Chinese market undertaken by Poland since 2010. Material and methods. Data for the study (n = 100 were collected using a paper survey in English carried out among mainland Chinese tourists in Cracow in 2015. Results. The Chinese usually visit Poland for the first time, often in transit. They are prompted by the information found online and by word of mouth. Their main reasons to come are tradition, culture, historical sites, landscapes, and low costs. These expectations are well fulfilled, and the tourists′ overall satisfaction is very high. The Chinese find Poland to be different from other Western European countries. For them, Poland is a remarkable, traditional, safe, and developing country. Yet, their knowledge about the destination is limited. The main problem encountered is the language barrier, both online and once on site. The marketing efforts undertaken by Poland in the Chinese market have had weak and ambivalent effects. Conclusions. In order to attract Chinese tourists, there is a need to intensify expenditure not only on promotion (mainly online but also on the removal of language-based communication problems. There is also scope for expanding the tourist offer dedicated to Chinese tourists - both in Poland and in cooperation with other Central European countries.

  4. Poland

    International Nuclear Information System (INIS)

    Sitnicki, S.; Budzinski, K.; Juda, J.; Michna, J.; Szpilewicz, A.

    1990-01-01

    Poland is an important case study in understanding the role of international cooperation in reducing the risk of global climate change. A the world's fourth largest coal producer, the nation occupies a key position in the political economy of a changing Europe. More importantly, Poland is pursuing energy policy reforms that half of the world must follow to reduce greenhouse gas emissions and prosper economically. Poland is undergoing profound economic and environmental change. This nation of 38 million people hopes to shift from planning to markets to allocate economic resources, and at the same time to conserve and protect environmental resources. Per capita incomes are only one-fourth of West Germany's, for example, but per capita energy use (and emissions of carbon dioxide) is just as high. High energy intensity causes much of Poland's serious air and water pollution. Economic efficiency could help reduce carbon and sulfur emissions, but the capital required to improve the energy infrastructure is scarce. The combination of these problems has reduced GNP per capita 9 percent over the last decade

  5. Electron beam coal combustion flue gas treatment developments in Poland

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    1994-01-01

    The research on EB(electron beam) flue gas treatment has started in Poland since 1985. It followed early tests performed in Japan, USA and Germany. The first tests using batch method were carried out in Institute of Atomic Energy. The continuous flow laboratory installation (400 Nm 3 /h) has been constructed in the Institute of Nuclear Chemistry and Technology (INCT) then. This installation containing ILV-6 electron beam accelerator (power 20 kW, energy of electrons 0-2 MeV) is equipped with additional microwaves generator. The eb or eb/mw energy can be applied to treated flue gas. On the basis of laboratory test an industrial pilot plant has been constructed at EPS Kaweczyn near Warsaw. At this plant being the biggest of this kind (20 000 Nm 3 /h) for the first time in industrial conditions multistage irradiation has been applied (two ELW-3 accelerators 50 kW each, energy of electrons 600-800 keV). High efficiency of SO 2 and NO x simultaneous removal, usable product (fertilizer), lower (in comparison with conventional technologies - FGD/SCR) investment and operational costs are the main advantages which have led to decision about starting demonstration industrial project. Feasibility study has been prepared for EPS Pomorzany, Szczecin, Poland. The plant planned will treat flue gases from power/heat generation block (2 Benson type boilers 56 MW e plus 40 MW th each). To meet Polish limits of 1997 half of flue gases will be treated with removal efficiency of 90% for SO 2 and 70% for NO x . Total flow rate will be equal to 270 000 Nm 3 /h. (author)

  6. Raman lidar water vapor profiling over Warsaw, Poland

    Science.gov (United States)

    Stachlewska, Iwona S.; Costa-Surós, Montserrat; Althausen, Dietrich

    2017-09-01

    Water vapor mixing ratio and relative humidity profiles were derived from the multi-wavelength Raman PollyXT lidar at the EARLINET site in Warsaw, using the Rayleigh molecular extinction calculation based on atmospheric temperature and pressure from three different sources: i) the standard atmosphere US 62, ii) the Global Data Assimilation System (GDAS) model output, and iii) the WMO 12374 radiosoundings launched at Legionowo. With each method, 136 midnight relative humidity profiles were obtained for lidar observations from July 2013 to August 2015. Comparisons of these profiles showed in favor of the latter method (iii), but it also indicated that the other two data sources could replace it, if necessary. Such use was demonstrated for an automated retrieval of water vapor mixing ratio from dusk until dawn on 19/20 March 2015; a case study related to an advection of biomass burning aerosol from forest fires over Ukraine. Additionally, an algorithm that applies thresholds to the radiosounding relative humidity profiles to estimate macro-physical cloud vertical structure was used for the first time on the Raman lidar relative humidity profiles. The results, based on a subset of 66 profiles, indicate that below 6 km cloud bases/tops can be successfully obtained in 53% and 76% cases from lidar and radiosounding profiles, respectively. Finally, a contribution of the lidar derived mean relative humidity to cloudy conditions within the range of 0.8 to 6.2 km, in comparison to clear-sky conditions, was estimated.

  7. Electron shower transverse profile measurement

    International Nuclear Information System (INIS)

    Lednev, A.A.

    1993-01-01

    A method to measure the shower transverse profile is described. Calibration data of the lead-glass spectrometer GAMS collected in a wide electron beam without any additional coordinate detector are used. The method may be used for the measurements in both cellular- and projective-type spectrometers. The results of measuring the 10 GeV electron shower profile in the GAMS spectrometer, without optical grease between the lead-glass radiators and photomultipliers, are approximated with an analytical function. The estimate of the coordinate accuracy is obtained. 5 refs., 8 figs

  8. Electronics and telecommunications in Poland - issues and perspectives

    CERN Document Server

    Modelski, J; 10.1117/12.871182; 10.1117/12.871183; 10.1117/12.871196

    2010-01-01

    Electronics is under development in this country in an organized and institutional way since the beginning of 30-ties of the previous century. It grew up from electrical engineering of weak currents and its first name used popularly was communications. It was time when television was born and the radio was maturing. Electronics is a branch of research and technology which deals with generation and processing of electrical and electromagnetic signals. A subject of telecommunications is signal transmission for a distance. Electronics and telecommunications (ET) includes or is combined with other branches like: microelectronics, radioelectronics, optoelectronics, photonics, acoustoelectronics, magnetronics, bioelectronics, energoelectronics, material engineering, semiconductor physics, automation and robotics, mechatronics and microsystems, informatics, teleinformatics, software engineering and other. Devices and functional systems of ET such as computers, data warehouses, cell phones, TV sets, Internet, GPS are...

  9. The Electronic Spatial Information System – tools for the monitoring of asbestos in Poland

    Directory of Open Access Journals (Sweden)

    Krówczyńska Małgorzata

    2014-06-01

    Full Text Available On January 1, 2005 the use of asbestos-containing products was banned in the European Union. According to the Act of 19 June 1997 banning the use of these products, their usage in Poland should be abated by the end of 2032. The whole process is being monitored by the Electronic Spatial Information System for the Monitoring of Asbestos Products Removal. The system design was based on a geodatabase. The research area of the study is the whole territory of Poland at the national, provincial and local level of detail. The monitoring process embraces spatial analysis through the preparation and interpretation of a range of maps. The results obtained from the deployed methods proved that the system has been useful for decision making purposes during the monitoring process. The proposed solutions were appreciated by the EU.

  10. Parametric dependencies of JET electron temperature profiles

    Energy Technology Data Exchange (ETDEWEB)

    Schunke, B [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Imre, K; Riedel, K [New York Univ., NY (United States)

    1994-07-01

    The JET Ohmic, L-Mode and H-Mode electron temperature profiles obtained from the LIDAR Thomson Scattering Diagnostic are parameterized in terms of the normalized flux parameter and a set of the engineering parameters like plasma current, toroidal field, line averages electron density... It is shown that the electron temperature profiles fit a log-additive model well. It is intended to use the same model to predict the profile shape for D-T discharges in JET and in ITER. 2 refs., 5 figs.

  11. Electronics Technology. Tech Prep Competency Profile.

    Science.gov (United States)

    Lakeland Tech Prep Consortium, Kirtland, OH.

    This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

  12. Students’ perception of attributes of independent colleges of business profile in the market of higher education in Poland

    Directory of Open Access Journals (Sweden)

    Dejnaka Agnieszka

    2016-12-01

    Full Text Available The article examines the general attributes which are in use by clients (students in the process of evaluation of non-public colleges of business profile in Poland. The evaluations are presented in comparison with other academic institutions having the same profile, both independent and public ones. In the research part, the method of factor analysis was used with the aim of distinguishing the general values which are in students’ use. The most important conclusion resulting from the work is that students of non-public colleges perceive two basic types of attributes regarding a business school, that is practical and academic assets, yet they are most clearly governed by a more pragmatic than academic system of values and choose colleges which – beyond any doubt – offer the model of vocational teaching supported by practice.

  13. Beam profile for Malaysian electron accelerator

    International Nuclear Information System (INIS)

    Abu Bakar Ghazali; Muhamad Zahidee Taat

    2007-01-01

    This paper comprises of two calculations that require in designing a dose profile for an electron accelerator machine before its fabrication. The first is to calculate the beam deflection due to changes of high voltage (HV) supply as well as the deflection coil currents so that the electron beam will only scan at the window foil of 18 cm length and 6 cm width. Secondly, we also require to calculate the beam profile at 50 mm underneath the window foil. The electron gun that produces a beam of 10 mm diameter has to be oscillated in a sawtooth wave for the prescribed window size at frequencies of 50 Hz and 400 Hz along the length and width directions respectively. For the beam deflection, we apply a basic formula from Lorentz force law to obtain a set of HV supply and the coil current that is suitable for both deflections and this result can assist in designing the coil current against HV changes via an electronic controller. The dose profile was calculated using the RMS current formulation along the length direction. We found that the measured and the calculated RMS currents are in comparable for the case of 1 MeV, 50 mA accelerator facility that is going to be installed at Nuclear Malaysia complex. A similar measurement will be carried out for our locally designed accelerator of 150 KeV, 10 mA after fabrication and installation of the machine are completed. (Author)

  14. Electron Bernstein wave electron temperature profile diagnostic (invited)

    International Nuclear Information System (INIS)

    Taylor, G.; Efthimion, P.; Jones, B.; Munsat, T.; Spaleta, J.; Hosea, J.; Kaita, R.; Majeski, R.; Menard, J.

    2001-01-01

    Electron cyclotron emission (ECE) has been employed as a standard electron temperature profile diagnostic on many tokamaks and stellarators, but most magnetically confined plasma devices cannot take advantage of standard ECE diagnostics to measure temperature. They are either ''overdense,'' operating at high density relative to the magnetic field (e.g., ω pe >>Omega ce in a spherical torus) or they have insufficient density and temperature to reach the blackbody condition (τ>2). Electron Bernstein waves (EBWs) are electrostatic waves that can propagate in overdense plasmas and have a high optical thickness at the electron cyclotron resonance layers as a result of their large k perp . In this article we report on measurements of EBW emission on the CDX-U spherical torus, where B 0 ∼2kG, e >∼10 13 cm -3 and T e ∼10--200eV. Results are presented for electromagnetic measurements of EBW emission, mode converted near the plasma edge. The EBW emission was absolutely calibrated and compared to the electron temperature profile measured by a multipoint Thomson scattering diagnostic. Depending on the plasma conditions, the mode-converted EBW radiation temperature was found to be ≤T e and the emission source was determined to be radially localized at the electron cyclotron resonance layer. A Langmuir triple probe and a 140 GHz interferometer were employed to measure changes in the edge density profile in the vicinity of the upper hybrid resonance where the mode conversion of the EBWs is expected to occur. Initial results suggest EBW emission and EBW heating are viable concepts for plasmas where ω pe >>Omega ce

  15. Short communication: Antimicrobial susceptibility profiling and genotyping of Staphylococcus aureus isolates from bovine mastitis in Poland.

    Science.gov (United States)

    Jagielski, T; Puacz, E; Lisowski, A; Siedlecki, P; Dudziak, W; Międzobrodzki, J; Krukowski, H

    2014-10-01

    Staphylococcus aureus is the predominant causative agent of bovine mastitis, a disease that remains a major economic burden for the dairy industry worldwide. In this study, the antimicrobial resistance patterns and the genetic composition of 80 S. aureus mastitis isolates collected from 14 dairy farms in Eastern Poland were determined. Of the 10 antimicrobial agents evaluated, only testing for penicillin G produced drug resistance. As 41% of the S. aureus isolates were penicillin resistant, this drug along with other β-lactamase-sensitive β-lactams, should rather not be considered for the treatment of bovine mastitis caused by S. aureus. Upon genotyping, with a triplex PCR method, a total of 11 distinct PCR types were produced. The population structure of S. aureus isolates was highly clonal, with 1 predominant genotype circulating on each farm. The observed similarities in the genotype composition of S. aureus populations from geographically distant farms underscore the significance of interfarm transmission of S. aureus in Poland. This, in turn, argues for the establishment of a nationwide surveillance program for bovine mastitis due to this pathogen. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  16. Family socio-economic profile and private spending on educational goods and services in Poland

    Directory of Open Access Journals (Sweden)

    Magdalena Rokicka

    2014-01-01

    Full Text Available According to theory, educational goods and services have an important impact on a child’s human capital. Although the majority of educational services in Poland are delivered within a public education system, various educational costs are borne by parents. This paper looks at the socio-economic determinants of private spending on education, including fees, private tutoring and courses, educational goods and materials, and the internet. The analysis was performed using the Polish Household Budget Survey for 2009 and 2010. Results from a logit regression suggest that disposable household income per capita and parental level of education, especially mother’s level of education have the greatest impact on spending on educational goods and services. This was true for all analysed categories of expenditure. Regional disparities and community size were an important factor especially with regards to spending on private tutoring and additional courses.

  17. Profiles of an initially perturbed electron beam

    International Nuclear Information System (INIS)

    Abdelsalam, F.W.

    1991-01-01

    This paper discusses the solutions for the profiles of an electron beam which is launched into a constant magnetic field with an initial boundary slope and injected with a radius which is greater or less than the cathode radius. It has been found that the outermost electron traces sine waves and executes limited excursions when the initial boundary slope corresponds to angles up to 1 degree, no matter whether the initial radius is 0.90 or 1.10 times the radius of the cathode. For initial inclination angles close to 2 degrees, the beam boundary does not preserve a sinusoidal shape, this statement holds true for focusing magnetic flux densities varying from 200x10 -4 to 700x10 -4 weber per square meter

  18. Electron density profile in multilayer systems

    International Nuclear Information System (INIS)

    Toekesi, K.

    2004-01-01

    Complete text of publication follows. Electron energy loss spectroscopy (EELS) has been used extensively to study the multilayer systems, where the thickness of layers are in the nanometer range. These studies has received considerable attention because of its technological interest, for example in the nanotechnology. On the most fundamental level, its importance is derived from the basic physics that is involved. One key quantities of interest is the response of a many-body system to an external perturbation: How act and how modify the interface between the solid-solid or solid-vacuum the excitations in the solid and in the vicinity of the interfaces. In this work, as a starting point of such investigations we calculated the electron density profile for multilayer systems. Our approach employs the time-dependent density functional theory (TDDFT), that is, the solution of a time-dependent Schroedinger equation in which the potential and forces are determined selfconsistently from the dynamics governed by the Schroedinger equation. We treat the problem in TDDFT at the level of the local-density approximation (LDA). Later, the comparison of experimentally obtained loss functions and the theory, based on our TDDFT calculations can provide deeper understanding of surface physics. We performed the calculations for half-infinite samples characterized by r s =1.642 and r s =1.997. We also performed the calculations for double layer systems. The substrate was characterized by r s =1.997 and the coverage by r s =1.642. Fig. 1. shows the obtained electron density profile in LDA approximation. Because of the sharp cutoff of electronic wave vectors at the Fermi surface, the densities in the interior exhibit slowly decaying Friedel oscillations. To highlight the Friedel oscillation we enlarged the electron density profile in Fig. 1a. and Fig. 1b. The work was supported by the Hungarian Scientific Research Found: OTKA No. T038016, the grant 'Bolyai' from the Hungarian Academy of

  19. Defence electronics industry profile, 1990-1991

    Science.gov (United States)

    The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

  20. Development of free electron laser and accelerator technology in Poland (CARE and EuCARD projects)

    CERN Document Server

    Romaniuk, Ryszard

    2009-01-01

    The development of accelerator technology in Poland is strictly combined with the cooperation with specialist accelerator centers of global character, where the relevant knowledge is generated, allowing to build big and modern machines. These are relatively costly undertakings of interdisciplinary character. Most of them are financed from the local resources. Only the biggest machines are financed commonly by many nations like: LHC in CERN, ILC in Fermi Lab, E-XFEL in DESY. A similar financing solution has to be implemented in Poland, where a scientific and political campaign is underway on behalf of building two big machines, a Polish Synchrotron in Kraków and a Polish FEL in Świerk. Around these two projects, there are realized a dozen or so smaller ones.

  1. Profile and bioconcentration of minerals by King Bolete (Boletus edulis) from the Płocka Dale in Poland.

    Science.gov (United States)

    Frankowska, Aneta; Ziółkowska, Joanna; Bielawski, Leszek; Falandysz, Jerzy

    2010-01-01

    This study aimed to provide basic data on the composition of metallic elements, including toxicologically important Cd and Hg, in popular and prized wild King Bolete mushrooms. We investigated the importance of soil substratum as a source of these metals. ICP-OES and CV-AAS were applied to determine the profile of Al, Ba, Ca, Cd, Cu, Fe, Hg, K, Mg, Mn, Na, Sr and Zn in caps and stipes of King Bolete mushroom and in the surface layer of soil (0-10 cm) from the Płocka Dale area of Poland. Hg, Cu, Cd, Zn, Mg and K exhibited bioconcentration factors (BCF) > 1. Specifically, Hg, Cu and Cd (mean BCFs for caps were 110, 19 and 16, respectively) were efficiently bioconcentrated by King Bolete, while other elements were bioexcluded (BCF < 1). Cadmium was present in the caps at mean levels of 5.5 ± 2.4 mg kg(-1) dry weight (dw) and mercury at levels of 4.9 ± 1.4 mg kg(-1) dw, both occurring at elevated concentrations in those King Bolete mushrooms surveyed.

  2. Observation of electron temperature profile in HL-1M tokamak

    International Nuclear Information System (INIS)

    Cao Jianyong; Xu Deming; Ding Xuantong

    2000-01-01

    The principle and method of the electron temperature measurement by means of electron cyclotron emission (ECE) have been described. Several results under different conditions on HL-1M tokamak have been given. The hollow profile of electron temperature appears in some stages, such as current rising, pellet injection and impurity concentration in the plasma centre. When the bias voltage is applied, the electron temperature profile become steeper. All of the phenomena are related with the transport in plasma centre

  3. Measurement of electron beams profile of pierce type electron source using sensor of used Tv tube

    International Nuclear Information System (INIS)

    Darsono; Suhartono; Suprapto; Elin Nuraini

    2015-01-01

    The measurement of an electron beam profile has been performed using electron beam monitor based on method of phosphorescent materials. The main components of the electron beam monitor consists of a fluorescent sensor using a used Tv tube, CCTV camera to record images on a Tv screen, video adapter as interface between CCTV and laptop, and the laptop as a viewer and data processing. Two Pierce-type electron sources diode and triode was measured the shape of electron beam profile in real time. Results of the experiments showed that the triode electron source of Pierce type gave the shape of electron beam profiles better than that of the diode electron source .The anode voltage is not so influential on the beam profile shape. The focused voltage in the triode electron source is so influence to the shape of the electron beam profile, but above 5 kV no great effect. It can be concluded that the electron beam monitor can provide real time observations and drawings shape of the electron beam profile displayed on the used Tv tube glass screen which is the real picture of the shape of the electron beam profile. Triode electron source produces a better electron beam profile than that of the diode electron source. (author)

  4. Electron Density Profile Data Contains Virtual Height/Frequency Pairs from a Profile or Profiles (Composite Months) of Ionograms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Electron Density Profile, N(h), data set contains both individual profiles and composite months. The data consist of virtual height/frequency pairs from a...

  5. Compton profiles by inelastic ion-electron scattering

    International Nuclear Information System (INIS)

    Boeckl, H.; Bell, F.

    1983-01-01

    It is shown that Compton profiles (CP) can be measured by inelastic ion-electron scattering. Within the impulse approximation the binary-encounter peak (BEP) reflects the CP of the target atom whereas the electron-loss peak (ELP) is given by projectile CP's. Evaluation of experimental data reveals that inelastic ion-electron scattering might be a promising method to supply inelastic electron or photon scattering for the determination of target CP's. The measurement of projectile CP's is unique to ion scattering since one gains knowledge about wave-function effects because of the high excitation degree of fast heavy-ion projectiles

  6. Electron density profile measurements by microwave reflectometry on Tore Supra

    International Nuclear Information System (INIS)

    Clairet, F.; Paume, M.; Chareau, J.M.

    1995-01-01

    A proposal is presented developing reflectometry diagnostic for electron density profile measurements as routine diagnostic without manual intervention as achieved at JET. Since density fluctuations seriously perturb the reflected signal and the measurement of the group delay, a method is described to overcome the irrelevant results with the help of an adaptive filtering technique. Accurate profiles are estimated for about 70% of the shots. (author) 3 refs.; 6 figs

  7. Electronics and telecommunications in Poland, issues and perspectives: Part I. Society and education

    Science.gov (United States)

    Modelski, Józef; Romaniuk, Ryszard

    2010-09-01

    Electronics is under development in this country in an organized and institutional way since the beginning of 30-ties of the previous century. It grew up from electrical engineering of weak currents and its first name used popularly was communications. It was time when television was born and the radio was maturing. Electronics is a branch of research and technology which deals with generation and processing of electrical and electromagnetic signals. A subject of telecommunications is signal transmission for a distance. Electronics and telecommunications (ET) includes or is combined with other branches like: microelectronics, radioelectronics, optoelectronics, photonics, acoustoelectronics, magnetronics, bioelectronics, energoelectronics, material engineering, semiconductor physics, automation and robotics, mechatronics and microsystems, informatics, teleinformatics, software engineering and other. Devices and functional systems of ET such as computers, data warehouses, cell phones, TV sets, Internet, GPS are build of electronic components and circuits. ET is a branch which belongs to hi-tech area, where the products gather a large load of knowledge of value overcoming frequently the price of work and material. ET has recently turned to an active participant of the processes of generation, storing, processing, transportation, distribution and usage of knowledge in the society. ET started to create artificial intelligence, co-creates intellectual property, searches for knowledge in big data sets, aids medicine, extends virtual/augmented reality, builds Internet of persons and things, strengthens security, protects natural environment, facilitates our life, aids our decisions, activates individuals, equalizes chances, provides convenient personal communications and access to data, starts building a penetrating ubiquitous infrastructure, ceases to be only a branch of technology, grows into the social space, touches culture, sociology, psychology and art. Such an

  8. Electronics and telecommunications in Poland, issues and perspectives: Part III. Innovativeness, applications, economy, development scenarios, politics

    Science.gov (United States)

    Modelski, Józef; Romaniuk, Ryszard

    2010-09-01

    Electronics is under development in this country in an organized and institutional way since the beginning of 30-ties of the previous century. It grew up from electrical engineering of weak currents and its first name used popularly was communications. It was time when television was born and the radio was maturing. Electronics is a branch of research and technology which deals with generation and processing of electrical and electromagnetic signals. A subject of telecommunications is signal transmission for a distance. Electronics and telecommunications (ET) includes or is combined with other branches like: microelectronics, radioelectronics, optoelectronics, photonics, acoustoelectronics, magnetronics, bioelectronics, energoelectronics, material engineering, semiconductor physics, automation and robotics, mechatronics and microsystems, informatics, teleinformatics, software engineering and other. Devices and functional systems of ET such as computers, data warehouses, cell phones, TV sets, Internet, GPS are build of electronic components and circuits. ET is a branch which belongs to hi-tech area, where the products gather a large load of knowledge of value overcoming frequently the price of work and material. ET has recently turned to an active participant of the processes of generation, storing, processing, transportation, distribution and usage of knowledge in the society. ET started to create artificial intelligence, co-creates intellectual property, searches for knowledge in big data sets, aids medicine, extends virtual/augmented reality, builds Internet of persons and things, strengthens security, protects natural environment, facilitates our life, aids our decisions, activates individuals, equalizes chances, provides convenient personal communications and access to data, starts building a penetrating ubiquitous infrastructure, ceases to be only a branch of technology, grows into the social space, touches culture, sociology, psychology and art. Such an

  9. Electronics and telecommunications in Poland, issues and perspectives: Part II. Science, research, development, higher education

    Science.gov (United States)

    Modelski, Józef; Romaniuk, Ryszard

    2010-09-01

    Electronics is under development in this country in an organized and institutional way since the beginning of 30-ties of the previous century. It grew up from electrical engineering of weak currents and its first name used popularly was communications. It was time when television was born and the radio was maturing. Electronics is a branch of research and technology which deals with generation and processing of electrical and electromagnetic signals. A subject of telecommunications is signal transmission for a distance. Electronics and telecommunications (ET) includes or is combined with other branches like: microelectronics, radioelectronics, optoelectronics, photonics, acoustoelectronics, magnetronics, bioelectronics, energoelectronics, material engineering, semiconductor physics, automation and robotics, mechatronics and microsystems, informatics, teleinformatics, software engineering and other. Devices and functional systems of ET such as computers, data warehouses, cell phones, TV sets, Internet, GPS are build of electronic components and circuits. ET is a branch which belongs to hi-tech area, where the products gather a large load of knowledge of value overcoming frequently the price of work and material. ET has recently turned to an active participant of the processes of generation, storing, processing, transportation, distribution and usage of knowledge in the society. ET started to create artificial intelligence, co-creates intellectual property, searches for knowledge in big data sets, aids medicine, extends virtual/augmented reality, builds Internet of persons and things, strengthens security, protects natural environment, facilitates our life, aids our decisions, activates individuals, equalizes chances, provides convenient personal communications and access to data, starts building a penetrating ubiquitous infrastructure, ceases to be only a branch of technology, grows into the social space, touches culture, sociology, psychology and art. Such an

  10. Electronic properties and Compton profiles of silver iodide

    Indian Academy of Sciences (India)

    We have carried out an extensive study of electronic properties of silver iodide in - and -phases. The theoretical Compton profiles, energy bands, density of states and anisotropies in momentum densities are computed using density functional theories. We have also employed full-potential linearized augmented ...

  11. Behavior of the bottomside electron density profile over Pruhonice

    Czech Academy of Sciences Publication Activity Database

    Mosert, M.; Burešová, Dalia; Ezquer, R.; Mansilla, G.

    2004-01-01

    Roč. 34, č. 9 (2004), s. 1982-1989 ISSN 0273-1177 R&D Projects: GA AV ČR IAA3042102 Institutional research plan: CEZ:AV0Z3042911 Keywords : Electron density profiles * Variability Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 0.548, year: 2004

  12. [Poland's syndrome].

    Science.gov (United States)

    Slezak, R; Sasiadek, M

    2000-08-01

    Poland's syndrome consists of the variable clinical features, but always includes unilateral aplasia of the chest wall muscles and ipsilateral anomalies of upper extremity. The incidence of Poland's syndrome, reported by different authors ranges from 1:10,000 to 1:100,000 and is observed more frequently in males than in females with the right side of the body affected more often than the left. The etiology of this syndrome is still discussed. However most of described cases were sporadic, rare familial incidence of Poland's syndrome were also presented. Therefore different etiologic factors of the Poland's syndrome are taken into account: genetic, vascular compromise during early stages of embriogenesis but also teratogenic effect of environmental xenobiotics (e.g. cigarette smoking by pregnant women). The authors present also the case of 20-years old man with inherited bilateral syndactyly with the right side aplasia of major pectoralis muscle and face asymmetry. The familial history was negative in respect to the features, associated with Poland's syndrome.

  13. Ionization rates and profiles of electron concentration in Martian atmosphere

    International Nuclear Information System (INIS)

    Komitov, B.; Spasov, S.; Gogoshev, M.

    1981-01-01

    The ionization and vertical profiles of electron concentration in the Martian atmosphere are calculated as functions of the solar zenith angles varying from O deg to 90 deg. A neutral atmospheric model based on direct mass-spectometric measurements from the Viking-1 landing modul is employed in the calculation. The Earth data of the ionization solar flux at the same level of the solar activity and for the month of the Viking-1 measurements reduced for the Mars orbit are used. The numerical result for the photoionization rates and quasi-equilibrium electron-concentration profiles in the upper Martian atmosphere at different solar zenith angles from 0 deg to 100 deg are presented. It is shown that the maxima of both quantities decrease and move towards the upper atmosphere regions. The calculated electron density at the zenith solar angle of 40 deg are compared to Viking-1 experimental data and a good agreement is achieved

  14. Ion transition heights from topside electron density profiles

    International Nuclear Information System (INIS)

    Titheridge, J.E.

    1976-01-01

    Theoretical electron density profiles are calculated for the topside ionosphere to determine the major factors controlling the profile shape. Only the mean temperature, the vertical temperature gradient and the O + /H + ion transition height are important. Vertical proton fluxes alter the ion transition height but have no other effect on the profile shape. Diffusive equilibrium profiles including only these three effects fit observed profiles, at all latitudes, to within experimental accuracy. Values of plasma temperature, temperature gradient and ion transition height hsub(T) were determined by fitting theoretical models to 60,000 experimental profiles obtained from Alouette 1 ionograms, at latitudes of 75 0 S to 85 0 N near solar minimum. Inside the plasmasphere hsub(T) varies from about 500 km on winter nights to 850 km on summer days. Diurnal variations are caused primarily by the production and loss of O + in the ionosphere. The approximately constant winter night value of hsub(T) is close to the level for chemical equilibrium. In summer hsub(T) is always above the equilibrium level, giving a continual production of protons which travel along lines of force to aid in maintaining the conjugate winter night ionosphere. Outside the plasmasphere hsub(T) is 300 to 600 km above the equilibrium level at all times. This implies a continual near-limiting upwards flux of protons which persists down to latitudes of about 60 0 at night and 50 0 during the day. (author)

  15. Plasma density profiles and finite bandwidth effects on electron heating

    International Nuclear Information System (INIS)

    Spielman, R.B.; Mizuno, K.; DeGroot, J.S.; Bollen, W.M.; Woo, W.

    1980-01-01

    Intense, p-polarized microwaves are incident on an inhomogeneous plasma in a cylindrical waveguide. Microwaves are mainly absorbed by resonant absorption near the critical surface (where the plasma frequency, ω/sub pe/, equals the microwave frequency, ω/sub o/). The localized plasma waves strongly modify the plasma density. Step-plateau density profiles or a cavity are created depending on the plasma flow speed. Hot electron production is strongly affected by the microwave bandwidth. The hot electron temperature varies as T/sub H/ is proportional to (Δ ω/ω) -0 25 . As the hot electron temperature decreases with increasing driver bandwidth, the hot electron density increases. This increase is such that the heat flux into the overdense region (Q is proportional to eta/sub H/T/sub H/ 3 2 ) is nearly constant

  16. An Electron-Beam Profile Monitor Using Fresnel Zone Plates

    International Nuclear Information System (INIS)

    Nakamura, Norio; Sakai, Hiroshi; Iida, Kensuke; Shinoe, Kenji; Takaki, Hiroyuki; Fujisawa, Masami; Hayano, Hitoshi; Muto, Toshiya; Nomura, Masaharu; Kamiya, Yukihide; Koseki, Tadashi; Amemiya, Yoshiyuki; Aoki, Nobutada; Nakayama, Koichi

    2004-01-01

    We have developed a beam profile monitor using two Fresnel zone plates (FZPs) at the KEK-ATF (Accelerator Test Facility) damping ring to measure small electron-beam sizes for low-emittance synchrotron radiation sources. The monitor has a structure of an X-ray microscope, where two FZPs constitute an X-ray imaging optics. In the monitor system, the synchrotron radiation from the electron beam at the bending magnet is monochromatized to 3.235-keV X-rays by a crystal monochromator and the transverse electron-beam image is twenty-times magnified by the two FZPs and detected on an X-ray CCD camera. This monitor has the following advantages: (1) high spatial resolution, (2) non-destructive measurement, (3) real-time monitoring, and (4) direct electron-beam imaging. With the beam profile monitor, we have succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. The measured magnification of the imaging optics was in good agreement with the design value

  17. POLAND AT CERN

    CERN Multimedia

    2000-01-01

    17 to 20 October 2000 Administration Building Bldg 60 - 1st floor 09h00 - 17h30 (Friday 09h00-12h00) POLAND AT CERN Twenty companies will present their latest technology at the «Poland at CERN» exhibition. The Polish industries will exhibit products and technologies, which are specifically related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, heavy mechanical components, small and precision machined mechanical components, instrumentation, electrical and mechanical, electronics and software, power-control and fibre optic cables. The exhibition is being organised by the Technology Transfer Agency, Techtra Ltd under the auspices of the National Atomic Energy Agency, the State Committee for Scientific Research and the Ministry of the Economy. There follows: - the list of exhibitors. A detailed programme will be available in due course at: - your Divisional Secretariat, - the Reception information desk, buildin...

  18. Chloride ingress profiles measured by electron probe micro analysis

    DEFF Research Database (Denmark)

    Jensen, Ole mejlhede; Coats, Alison M.; Glasser, Fred P.

    1996-01-01

    Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA is demonst......Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA...... is demonstated to determine chloride ingress in cement paste on a micrometer scale. Potential chloride ingress routes such as cracks or the paste-aggregate interface may also be characterized by EPMA. Copyright (C) 1996 Elsevier Science Ltd...

  19. Current profile reconstruction using electron temperature imaging diagnostics

    International Nuclear Information System (INIS)

    Tritz, K.; Stutman, D.; Delgado-Aparicio, L.F.; Finkenthal, M.; Pacella, D.; Kaita, R.; Stratton, B.; Sabbagh, S.

    2004-01-01

    Flux surface shape information can be used to constrain the current profile for reconstruction of the plasma equilibrium. One method of inferring flux surface shape relies on plasma x-ray emission; however, deviations from the flux surfaces due to impurity and density asymmetries complicate the interpretation. Electron isotherm surfaces should correspond well to the plasma flux surfaces, and equilibrium constraint modeling using this isotherm information constrains the current profile. The KFIT code is used to assess the profile uncertainty and to optimize the number, location and SNR required for the Te detectors. As Te imaging detectors we consider tangentially viewing, vertically spaced, linear gas electron multiplier arrays operated in pulse height analysis (PHA) mode and multifoil soft x-ray arrays. Isoflux coordinate sets provided by T e measurements offer a strong constraint on the equilibrium reconstruction in both a stacked horizontal array configuration and a crossed horizontal and vertical beam system, with q 0 determined to within ±4%. The required SNR can be provided with either PHA or multicolor diagnostic techniques, though the multicolor system requires ∼x4 better statistics for comparable final errors

  20. [Occupational exposure to silica dust by selected sectors of national economy in Poland based on electronic database].

    Science.gov (United States)

    Bujak-Pietrek, Stella; Mikołajczyk, Urszula; Szadkowska-Stańczyk, Irena; Stroszejn-Mrowca, Grazyna

    2008-01-01

    To evaluate occupational exposure to dusts, the Nofer Institute of Occupational Medicine in Łódź, in collaboration with the Chief Sanitary Inspectorate, has developed the national database to store the results of routine dust exposure measurements performed by occupational hygiene and environmental protection laboratories in Poland in the years 2001-2005. It was assumed that the collected information will be useful in analyzing workers' exposure to free crystalline silica (WKK)-containing dusts in Poland, identyfing exceeded hygiene standards and showing relevant trends, which illustrate the dynamics of exposure in the years under study. Inhalable and respirable dust measurement using personal dosimetry were done according to polish standard PN-91/Z-04030/05 and PN-91/Z-04030/06. In total, 148 638 measurement records, provided by sanitary inspection services from all over Poland, were entered into the database. The database enables the estimation of occupational exposure to dust by the sectors of national economy, according to the Polish Classification of Activity (PKD) and by kinds of dust. The highest exposure level of inhalable and respirable dusts was found in coal mining. Also in this sector, almost 60% of surveys demonstrated exceeded current hygiene standards. High concentrations of both dust fractions (inhalable and respirable) and a considerable percentage of measurements exceeding hygiene standards were found in the manufacture of transport equipment (except for cars), as well as in the chemical, mining (rock, sand, gravel, clay mines) and construction industries. The highest percentage of surveys (inhalable and respirable dust) showing exceeded hygiene standards were observed for coal dust with different content of crystalline silica, organic dust containing more than 10% of SiO2, and highly fibrosis dust containing more than 50% of SiO2.

  1. Analysis of Total Electron Content and Electron Density Profile during Different Geomagnetic Storms

    Science.gov (United States)

    Chapagain, N. P.; Rana, B.; Adhikari, B.

    2017-12-01

    Total Electron content (TEC) and electron density are the key parameters in the mitigation of ionospheric effects on radio communication system. Detail study of the TEC and electron density variations has been carried out during geomagnetic storms, with longitude and latitude, for four different locations: (13˚N -17˚N, 88˚E -98˚E), (30˚N-50˚N, 120˚W -95˚W), (29˚S-26˚S, 167˚W-163˚W,) and (60˚S-45˚S, 120˚W-105˚W) using the Gravity Recovery and Climate Experiment (GRACE) satellite observations. In order to find the geomagnetic activity, the solar wind parameters such as north-south component of inter planetary magnetic field (Bz), plasma drift velocity (Vsw), flow pressure (nPa), AE, Dst and Kp indices were obtained from Operating Mission as Nodes on the Internet (OMNI) web system. The data for geomagnetic indices have been correlated with the TEC and electron density for four different events of geomagnetic storms on 6 April 2008, 27 March 2008, 4 September 2008, and 11 October 2008. The result illustrates that the observed TEC and electron density profile significantly vary with longitudes and latitudes. This study illustrates that the values of TEC and the vertical electron density profile are influenced by the solar wind parameters associated with solar activities. The peak values of electron density and TEC increase as the geomagnetic storms become stronger. Similarly, the electron density profile varies with altitudes, which peaks around the altitude range of about 250- 350 km, depending on the strength of geomagnetic storms. The results clearly show that the peak electron density shifted to higher altitude (from about 250 km to 350 km) as the geomagnetic disturbances becomes stronger.

  2. Automated Processing of ISIS Topside Ionograms into Electron Density Profiles

    Science.gov (United States)

    Reinisch, bodo W.; Huang, Xueqin; Bilitza, Dieter; Hills, H. Kent

    2004-01-01

    Modeling of the topside ionosphere has for the most part relied on just a few years of data from topside sounder satellites. The widely used Bent et al. (1972) model, for example, is based on only 50,000 Alouette 1 profiles. The International Reference Ionosphere (IRI) (Bilitza, 1990, 2001) uses an analytical description of the graphs and tables provided by Bent et al. (1972). The Alouette 1, 2 and ISIS 1, 2 topside sounder satellites of the sixties and seventies were ahead of their times in terms of the sheer volume of data obtained and in terms of the computer and software requirements for data analysis. As a result, only a small percentage of the collected topside ionograms was converted into electron density profiles. Recently, a NASA-funded data restoration project has undertaken and is continuing the process of digitizing the Alouette/ISIS ionograms from the analog 7-track tapes. Our project involves the automated processing of these digital ionograms into electron density profiles. The project accomplished a set of important goals that will have a major impact on understanding and modeling of the topside ionosphere: (1) The TOPside Ionogram Scaling and True height inversion (TOPIST) software was developed for the automated scaling and inversion of topside ionograms. (2) The TOPIST software was applied to the over 300,000 ISIS-2 topside ionograms that had been digitized in the fkamework of a separate AISRP project (PI: R.F. Benson). (3) The new TOPIST-produced database of global electron density profiles for the topside ionosphere were made publicly available through NASA s National Space Science Data Center (NSSDC) ftp archive at . (4) Earlier Alouette 1,2 and ISIS 1, 2 data sets of electron density profiles from manual scaling of selected sets of ionograms were converted fiom a highly-compressed binary format into a user-friendly ASCII format and made publicly available through nssdcftp.gsfc.nasa.gov. The new database for the topside ionosphere established

  3. [Prevalence and user profile of electronic cigarettes in Spain (2014)].

    Science.gov (United States)

    Lidón-Moyano, Cristina; Martínez-Sánchez, Jose M; Fu, Marcela; Ballbè, Montse; Martín-Sánchez, Juan Carlos; Fernández, Esteve

    To describe the prevalence and user profile of electronic cigarettes among Spanish adults and evaluate the potential dual use of these devices with combustible or conventional tobacco in 2014 in Spain. Cross-sectional study of a representative sample of the Spanish adult (16-75 years old) population (n=1,016). A computer-assisted telephone survey was conducted in 2014. The prevalence and 95% confidence intervals (95% CI) for the use of electronic cigarettes stratified by gender, age, tobacco consumption and social status were calculated. The sample was weighted and a logistic regression model adjusted to obtain the crude odds ratios (OR) adjusted by gender, age and social status. 10.3% (95% CI: 8.6-12.4) of the Spanish adult population stated being ever users of electronic cigarettes (2% current users, 3.2% past users and 5.1% experimental users). Among current electronic cigarette users, 57.2% also smoked combustible or conventional tobacco, 28% had never smoked and 14.8% were former smokers. The prevalence of electronic cigarette use was higher in the younger population (adjusted OR=23.8; 95% CI: 2.5-227.7) and smokers of combustible tobacco (adjusted OR=10.1; 95% CI: 5.8-17.5). The use of electronic cigarettes in Spain is scarce and is most prevalent among young people and tobacco smokers. Nevertheless, one out of four current electronic cigarette users have never smoked. Hence, the regulation of these devices should be reinforced to avoid a possible gateway to nicotine products among never smokers. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. An Electron Beam Profile Instrument Based on FBGs

    Directory of Open Access Journals (Sweden)

    Dan Sporea

    2014-08-01

    Full Text Available Along with the dose rate and the total irradiation dose measurements, the knowledge of the beam localization and the beam profile/energy distribution in the beam are parameters of interest for charged particle accelerator installations when they are used in scientific investigations, industrial applications or medical treatments. The transverse profile of the beam, its position, its centroid location, and its focus or flatness depend on the instrument operating conditions or on the beam exit setup. Proof-of-concept of a new type of charged particle beam diagnostics based on fiber Bragg gratings (FBGs was demonstrated. Its operating principle relies on the measurement of the peak wavelength changes for an array of FBG sensors as function of the temperature following the exposure to an electron beam. Periodically, the sensor irradiation is stopped and the FBG are force cooled to a reference temperature with which the temperature influencing each sensor during beam exposure is compared. Commercially available FBGs, and FBGs written in radiation resistant optical fibers, were tested under electron beam irradiation in order to study their possible use in this application.

  5. Dopant profiling based on scanning electron and helium ion microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Chee, Augustus K.W., E-mail: kwac2@cam.ac.uk [Centre for Advanced Photonics and Electronics, Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge CB3 0FA (United Kingdom); Boden, Stuart A. [University of Southampton, Electronics and Computer Science, Highfield, Southampton SO17 1BJ (United Kingdom)

    2016-02-15

    In this paper, we evaluate and compare doping contrast generated inside the scanning electron microscope (SEM) and scanning helium ion microscope (SHIM). Specialised energy-filtering techniques are often required to produce strong doping contrast to map donor distributions using the secondary electron (SE) signal in the SEM. However, strong doping contrast can be obtained from n-type regions in the SHIM, even without energy-filtering. This SHIM technique is more sensitive than the SEM to donor density changes above its sensitivity threshold, i.e. of the order of 10{sup 16} or 10{sup 17} donors cm{sup −3} respectively on specimens with or without a p–n junction; its sensitivity limit is well above 2×10{sup 17} acceptors cm{sup −3} on specimens with or without a p–n junction. Good correlation is found between the widths and slopes of experimentally measured doping contrast profiles of thin p-layers and the calculated widths and slopes of the potential energy distributions across these layers, at a depth of 1 to 3 nm and 5 to 10 nm below the surface in the SHIM and the SEM respectively. This is consistent with the mean escape depth of SEs in silicon being about 1.8 nm and 7 nm in the SHIM and SEM respectively, and we conclude that short escape depth, low energy SE signals are most suitable for donor profiling. - Highlights: • Strong doping contrast from n-type regions in the SHIM without energy-filtering. • Sensitivity limits are established of the SHIM and SEM techniques. • We discuss the impact of SHIM imaging conditions on quantitative dopant profiling. • Doping contrast stems from different surface layer thicknesses in the SHIM and SEM.

  6. Photovoltaics in Poland

    International Nuclear Information System (INIS)

    Pietruszko, Stanislaw M.

    2003-01-01

    The legislative framework and financing possibilities for photovoltaics (PV) in Poland are presented. Barriers that exist or can be encountered in implementing PV technology in Poland are identified. This paper also discusses future prospects and possibilities for developing photovoltaics in Poland. Finally, the paper suggests ways to promote, disseminate, and deploy PV technology in Poland. (Author)

  7. Electron beam based transversal profile measurements of intense ion beams

    International Nuclear Information System (INIS)

    El Moussati, Said

    2014-01-01

    A non-invasive diagnostic method for the experimental determination of the transverse profile of an intense ion beam has been developed and investigated theoretically as well as experimentally within the framework of the present work. The method is based on the deflection of electrons when passing the electromagnetic field of an ion beam. To achieve this an electron beam is employed with a specifically prepared transversal profile. This distinguish this method from similar ones which use thin electron beams for scanning the electromagnetic field [Roy et al. 2005; Blockland10]. The diagnostic method presented in this work will be subsequently called ''Electron-Beam-Imaging'' (EBI). First of all the influence of the electromagnetic field of the ion beam on the electrons has been theoretically analyzed. It was found that the magnetic field causes only a shift of the electrons along the ion beam axis, while the electric field only causes a shift in a plane transverse to the ion beam. Moreover, in the non-relativistic case the magnetic force is significantly smaller than the Coulomb one and the electrons suffer due to the magnetic field just a shift and continue to move parallel to their initial trajectory. Under the influence of the electric field, the electrons move away from the ion beam axis, their resulting trajectory shows a specific angle compared to the original direction. This deflection angle practically depends just on the electric field of the ion beam. Thus the magnetic field has been neglected when analysing the experimental data. The theoretical model provides a relationship between the deflection angle of the electrons and the charge distribution in the cross section of the ion beam. The model however only can be applied for small deflection angles. This implies a relationship between the line-charge density of the ion beam and the initial kinetic energy of the electrons. Numerical investigations have been carried out to clarify the

  8. Incidence, Microbiological Profile and Risk Factors of Healthcare-Associated Infections in Intensive Care Units: A 10 Year Observation in a Provincial Hospital in Southern Poland

    Science.gov (United States)

    Kołpa, Małgorzata; Wałaszek, Marta; Gniadek, Agnieszka; Wolak, Zdzisław; Dobroś, Wiesław

    2018-01-01

    Healthcare-associated infections (HAIs) occurring in patients treated in an intensive care unit (ICU) are serious complications in the treatment process. Aetiological factors of these infections can have an impact on treatment effects, treatment duration and mortality. The aim of the study was to determine the prevalence and microbiological profile of HAIs in patients hospitalized in an ICU over a span of 10 years. The active surveillance method was used to detect HAIs in adult patients who spent over 48 h in a general ICU ward located in southern Poland between 2007 and 2016. The study was conducted in compliance with the methodology recommended by the Healthcare-associated Infections Surveillance Network (HAI-Net) of the European Centre for Disease Prevention and Control (ECDC). During the 10 years of the study, 1849 patients hospitalized in an ICU for a total of 17,599 days acquired 510 with overall HAIs rates of 27.6% and 29.0% infections per 1000 ICU days. Intubation-associated pneumonia (IAP) posed the greatest risk (15.2 per 1000 ventilator days), followed by CLA-BSI (8.0 per 1000 catheter days) and CA-UTI (3.0 per 1000 catheter days). The most common isolated microorganism was Acinetobacter baumannii (25%) followed by Coagulaase-negativ staphylococci (15%), Escherichia coli (9%), Pseudomonas aeruginosa (8%), Klebsiella pneumoniae (7%), Candida albicans (6%). Acinetobacter baumannii in 87% and were classified as extensive-drug resistant (XDR). In summary, in ICU patients pneumonia and bloodstream infections were the most frequently found. Acinetobacter baumannii strains were most often isolated from clinical materials taken from HAI patients and showed resistance to many groups of antibiotics. A trend of increasing resistance of Acinetobacter baumannii to carbapenems was observed. PMID:29324651

  9. Construction of a high resolution electron beam profile monitor

    International Nuclear Information System (INIS)

    Norem, J.; Dawson, J.; Haberichter, W.; Novak, W.; Reed, L.; Yang, X.F.

    1993-01-01

    Bremsstrahlung from an electron beam on a heavy target can be used to image the beam profile using collimators and slits. The limiting resolution using this system is determined by Fresnel diffraction, and is ∼ √(λd/2), where λ is the photon wavelength and d is determined by the linear dimensions of the system. For linear colliders this resolution could be a few nm. The highest resolution requires detectors which see only high energy, (small λ), photons, and this is accomplished by converting photons to pairs, and detecting Cherenkov light in a nearly forward angle with a CCD detector or streak camera. Tests are planned at the Argonne APS and SLAC FFTB

  10. Food irradiation in EU and in Poland

    International Nuclear Information System (INIS)

    Migdal, W.

    2007-01-01

    Lecture shows comparison of food radiosterilization in Poland with selected countries in EU. The most popular commercial electron radiation sources are presented. Plant for Food Radiation Sterilization operating in the INCT is discussed in details

  11. Electronic cigarette: users profile, utilization, satisfaction and perceived efficacy.

    Science.gov (United States)

    Etter, Jean-François; Bullen, Chris

    2011-11-01

    To assess the profile, utilization patterns, satisfaction and perceived effects among users of electronic cigarettes ('e-cigarettes'). Internet survey in English and French in 2010. Online questionnaire. Visitors of websites and online discussion forums dedicated to e-cigarettes and to smoking cessation. There were 3587 participants (70% former tobacco smokers, 61% men, mean age 41 years). The median duration of electronic cigarette use was 3 months, users drew 120 puffs/day and used five refills/day. Almost all (97%) used e-cigarettes containing nicotine. Daily users spent $33 per month on these products. Most (96%) said the e-cigarette helped them to quit smoking or reduce their smoking (92%). Reasons for using the e-cigarette included the perception that it was less toxic than tobacco (84%), to deal with craving for tobacco (79%) and withdrawal symptoms (67%), to quit smoking or avoid relapsing (77%), because it was cheaper than smoking (57%) and to deal with situations where smoking was prohibited (39%). Most ex-smokers (79%) feared they might relapse to smoking if they stopped using the e-cigarette. Users of nicotine-containing e-cigarettes reported better relief of withdrawal and a greater effect on smoking cessation than those using non-nicotine e-cigarettes. E-cigarettes were used much as people would use nicotine replacement medications: by former smokers to avoid relapse or as an aid to cut down or quit smoking. Further research should evaluate the safety and efficacy of e-cigarettes for administration of nicotine and other substances, and for quitting and relapse prevention. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

  12. POLAND AT CERN

    CERN Multimedia

    2000-01-01

    17 to 20 October 2000 Administration Building Bldg 60 - 1st floor 09h00 - 17h30 (Friday 09h00-12h00) OPENING CEREMONY 10h00 - 17 October Nineteen companies will present their latest technology at the “Poland at CERN” exhibition. The Polish industries will exhibit products and technologies, which are specifically related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, heavy mechanical components, small and precision machined mechanical components, instrumentation, electrical and mechanical, electronics and software, power-control and fibre optic cables. The exhibition is being organised by the Technology Transfer Agency, Techtra Ltd under the auspices of the National Atomic Energy Agency, the State Committee for Scientific Research and the Ministry of the Economy. There follows: the list of exhibitors. A detailed programme will be available in due course at: your Divisional Secretariat, the Reception information desk, b...

  13. POLAND AT CERN

    CERN Multimedia

    2000-01-01

    17 to 20 October 2000 Administration Building Bldg 60 - 1st floor 09h00 - 17h30 (Friday 09h00-12h00) OPENING CEREMONY 10h00 - 17 October Nineteen companies will present their latest technology at the “Poland at CERN” exhibition. The Polish industries will exhibit products and technologies, which are specifically related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, heavy mechanical components, small and precision machined mechanical components, instrumentation, electrical and mechanical, electronics and software, power-control and fibre optic cables. The exhibition is being organised by the Technology Transfer Agency, Techtra Ltd under the auspices of the National Atomic Energy Agency, the State Committee for Scientific Research and the Ministry of the Economy. There follows: the list of exhibitors. A detailed programme will be available in due course at: your Divisional Secretariat, the Reception information desk, bu...

  14. POLAND AT CERN

    CERN Multimedia

    2000-01-01

    17 to 20 October 2000 Administration Building Bldg 60 - 1st floor 09h00 - 17h30 (Friday 09h00-12h00) Twenty companies will present their latest technology at the ´Poland at CERNª exhibition. The Polish industries will exhibit products and technologies, which are specifically related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, heavy mechanical components, small and precision machined mechanical components, instrumentation, electrical and mechanical, electronics and software, power-control and fibre optic cables. The exhibition is being organised by the Technology Transfer Agency, Techtra Ltd under the auspices of the National Atomic Energy Agency, the State Committee for Scientific Research and the Ministry of the Economy. There follows: - the list of exhibitors. A detailed programme will be available in due course at: - your Divisional Secretariat, - the Reception information desk, building 33, - the exhi...

  15. Use of electronic cigarettes among secondary and high school students from a socially disadvantaged rural area in Poland

    Directory of Open Access Journals (Sweden)

    Dorota Kaleta

    2016-08-01

    Full Text Available Abstract Background The use of e-cigarettes has been growing and has become a significant public health concern. Prevention of the youth access to, initiation and continuous use of e-cigarettes with special attention to vulnerable groups is a subject of a health debate. However, still little is known about characteristics of the underage e-cigarette users from different geographic and socio-economic backgrounds as well as other potential factors associated with the use of e-cigarettes, including simultaneous use with tobacco products or alcohol. The aim of the study was to investigate the prevalence and factors associated with ever and continued e-cigarette use among the secondary and high school students from a socially disadvantaged rural area in Poland. Methods The study sample consisted of 3552 students aged 13–19 years from Piotrkowski district. The anonymous, self-administered questionnaire adapted from the Global Youth Tobacco Survey was implemented to collect relevant information. The uni- and multivariate logistic regression analyses were applied to identify factors associated with ever, current (in the previous 30 days and continued e-cigarette use. Results Almost 22 % of the sample reported ever e-cigarettes use and 27 % of the respondents indicated e-cigarettes use in the past month. Boys, in comparison with girls, were more likely to report current e-cigarette use (OR = 1.7; p < 0.001. Current e-cigarette use was strongly associated with alcohol consumption (OR = 4.3; p < 0.001, current (OR = 32.5; p < 0.001 and ever tobacco smoking (OR = 7.5; p < 0.001 as well as smoking parents (OR = 1.4; p < 0.05 and friends (OR = 4.5; p < 0.05. The use of e-cigarettes was also significantly associated with harm perception (p < 0.001. A similar pattern was observed among ever e-cigarette users. Male gender (OR = 1.4; p < 0.05, current tobacco smoking (OR = 3.0; p < 0.01 and

  16. Comparison of clinical profile and management of outpatients with heart failure with reduced left ventricular ejection fraction treated by general practitioners and cardiologists in contemporary Poland: the results from the DATA-HELP registry.

    Science.gov (United States)

    Jankowska, Ewa A; Kalicinska, Elzbieta; Drozd, Marcin; Kurian, Beata; Banasiak, Waldemar; Ponikowski, Piotr

    2014-10-20

    We sought to determine and compare clinical profile and management of outpatients with heart failure with reduced ejection fraction (HFREF) treated by cardiologists and general practitioners (GPs) in Poland. All the 790 randomly selected cardiologists and GPs in the DATA-HELP registry, which included 5563 patients, filled out questionnaires about 10 consecutive outpatients with HFREF. Outpatients managed by GPs were older (69±10 vs 66±12 years), and the prevalence of men was less marked (58% vs 67%). They also had higher left ventricular ejection fraction (38±6% vs 35±8%) and had more pulmonary congestion (63% vs 49%) and peripheral oedema (66% vs 51%), compared with those treated by cardiologists (all p0.2) and digoxin (20% vs 21%, p>0.2) by GPs and cardiologists was similar. In contemporary Poland, most outpatients with HFREF receive drugs that improve survival and undergo revascularisation procedures, although devices are rare, but the clinical profiles and management of those treated by GPs and cardiologists differ. Outpatients treated by GPs are older and have more co-morbidities. Outpatients treated by cardiologists more commonly receive β-blocker, MRA, ICD, and CRT, and undergo coronary revascularisations. Copyright © 2014. Published by Elsevier Ireland Ltd.

  17. Electron cyclotron heating for current profile control of non-circular plasmas

    International Nuclear Information System (INIS)

    Chan, V.S.; Davidson, R.; Guest, G.; Hacker, M.; Miller, L.

    1981-01-01

    Electron Cyclotron Heating (ECH) offers a promising approach to modifying the radial profiles of electron temperature and plasma current in tokamaks to increase the ideal MHD beta limits and permit experimental access to particular noncircular cross-section tokamaks that cannot be achieved with the peaked current profiles characteristic of ohmically heated tokamaks. We use a one-and-one-half-dimensional, time-dependent transport model that incorporates a self-consistent model of electron cyclotron power absorption to study the temporal evolution of electron temperature and plasma current profiles and the resulting noncircular equilibria. Startup scenarios for high-beta dees and doublets are investigated with this transport modeling

  18. Data description and quality assessment of ionospheric electron density profiles for ARPA modeling project. Technical report

    International Nuclear Information System (INIS)

    Conkright, R.O.

    1977-03-01

    This report presents a description of the automated method used to produce electron density (N(h)) profiles from ionograms recorded on 35mm film and an assessment of the resulting data base. A large data base of about 30,000 profiles was required for an ionospheric modeling project. This motivated a search for an automated method of producing profiles. The automated method used is fully described, the resulting data are given a quality grade, and the noon and midnight profiles are presented. Selected portions of this data base are compared with profiles produced by the standard profiling method in use by the Environmental Data Service at Boulder, Colorado

  19. Influence of an imperfect energy profile on a seeded free electron laser performance

    Directory of Open Access Journals (Sweden)

    Botao Jia

    2010-06-01

    Full Text Available A single-pass high-gain x-ray free electron laser (FEL calls for a high quality electron bunch. In particular, for a seeded FEL amplifier and for a harmonic generation FEL, the electron bunch initial energy profile uniformity is crucial for generating an FEL with a narrow bandwidth. After the acceleration, compression, and transportation, the electron bunch energy profile entering the undulator can acquire temporal nonuniformity. We study the influence of the electron bunch initial energy profile nonuniformity on the FEL performance. Intrinsically, for a harmonic generation FEL, the harmonic generation FEL in the final radiator starts with an electron bunch having energy modulation acquired in the previous stages, due to the FEL interaction at those FEL wavelengths and their harmonics. The influence of this electron bunch energy nonuniformity on the harmonic generation FEL in the final radiator is then studied.

  20. Equatorial bottom and topside electron density profiles and comparison with IRI

    International Nuclear Information System (INIS)

    Reinisch, B.W.; Huang, X.; Conway, J.; Komjathy, A.

    2001-01-01

    A new technique of estimating the ionospheric topside profile from the information contained in the groundbased ionograms is described. The electron density profile above the F2 layer peak is approximated by an α-Chapman function with a constant scale height that is derived from the bottomside profile shape near the F2 peak. The scale height is obtained from the bottomside profile by representing the latter in terms of α-Chapman functions with scale heights H(h) that vary as a function of height. The scale height at the layer peak is then used for the topside profile. The bottomside and topside electron contents is obtained by integrating the electron density from h=0 to hmF2 and from hmF2 to ∞. The ionogram derived electron content values for Jicamarca in 1998 are compared with the respective IRI values. (author)

  1. Electronic structure of hafnium: A Compton profile study

    Indian Academy of Sciences (India)

    To extract the true Compton profile from the raw data, the raw data were cor- rected for ... For the present sample and experimental conditions, the contribution of .... are in better agreement with the simple renormalized free atom calculations for.

  2. Technological guns which form the profiled electron beans

    International Nuclear Information System (INIS)

    Mel'nik, V.I.

    1998-01-01

    Electron guns with high-voltage glow discharge are developed which form disc - and tubule-like,hollow conic and linear electron beams,as well as devices and systems for control of gun parameter and technological processes in low and intermediate vacuum

  3. Measurement of electron density profiles by soft X-ray tomography on the RTP tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, D.F. da; Donne, A.J.H.; Lyadina, E.S.; Rutteman, R.H.; Tanzi, C.P. [FOM-Instituut voor Plasmafysica, Rijnhuizen (Netherlands)

    1993-12-31

    Tomographic diagnosis of the soft x-ray emissivity profile is a powerful method for studying several plasma parameters. The x-ray emissivity is a complicated function of plasma quantities like the electron density and temperature, and the impurity content in the plasma. These quantities can be studied separately provided that information is available on the remaining parameters. Soft x-ray emissivity profiles have already been used successfully in other machines to determine local values of impurity densities and the effective charge Z{sub eff}. In the RTP tokamak the electron density profile has been inferred from a modelling of the x-ray emissivity in situations where information is available on the electron temperature profile, the value of Z{sub eff}, and the relative proportion of the impurities. The method can be useful for the study of hollow density profiles that cannot be properly reconstructed by Abel inversion of interferometer or reflectometer data. (author) 7 refs., 2 figs.

  4. Measurement of electron density profiles by soft X-ray tomography on the RTP tokamak

    International Nuclear Information System (INIS)

    Cruz, D.F. da; Donne, A.J.H.; Lyadina, E.S.; Rutteman, R.H.; Tanzi, C.P.

    1993-01-01

    Tomographic diagnosis of the soft x-ray emissivity profile is a powerful method for studying several plasma parameters. The x-ray emissivity is a complicated function of plasma quantities like the electron density and temperature, and the impurity content in the plasma. These quantities can be studied separately provided that information is available on the remaining parameters. Soft x-ray emissivity profiles have already been used successfully in other machines to determine local values of impurity densities and the effective charge Z eff . In the RTP tokamak the electron density profile has been inferred from a modelling of the x-ray emissivity in situations where information is available on the electron temperature profile, the value of Z eff , and the relative proportion of the impurities. The method can be useful for the study of hollow density profiles that cannot be properly reconstructed by Abel inversion of interferometer or reflectometer data. (author) 7 refs., 2 figs

  5. Measurements of electron density profiles using an angular filter refractometer

    International Nuclear Information System (INIS)

    Haberberger, D.; Ivancic, S.; Hu, S. X.; Boni, R.; Barczys, M.; Craxton, R. S.; Froula, D. H.

    2014-01-01

    A novel diagnostic technique, angular filter refractometry (AFR), has been developed to characterize high-density, long-scale-length plasmas relevant to high-energy-density physics experiments. AFR measures plasma densities up to 10 21  cm −3 with a 263-nm probe laser and is used to study the plasma expansion from CH foil and spherical targets that are irradiated with ∼9 kJ of ultraviolet (351-nm) laser energy in a 2-ns pulse. The data elucidate the temporal evolution of the plasma profile for the CH planar targets and the dependence of the plasma profile on target radius for CH spheres

  6. Measurements of electron density profiles using an angular filter refractometer

    Energy Technology Data Exchange (ETDEWEB)

    Haberberger, D., E-mail: dhab@lle.rochester.edu; Ivancic, S.; Hu, S. X.; Boni, R.; Barczys, M.; Craxton, R. S.; Froula, D. H. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14636 (United States)

    2014-05-15

    A novel diagnostic technique, angular filter refractometry (AFR), has been developed to characterize high-density, long-scale-length plasmas relevant to high-energy-density physics experiments. AFR measures plasma densities up to 10{sup 21} cm{sup −3} with a 263-nm probe laser and is used to study the plasma expansion from CH foil and spherical targets that are irradiated with ∼9 kJ of ultraviolet (351-nm) laser energy in a 2-ns pulse. The data elucidate the temporal evolution of the plasma profile for the CH planar targets and the dependence of the plasma profile on target radius for CH spheres.

  7. Moving gantry method for electron beam dose profile measurement at extended source-to-surface distances.

    Science.gov (United States)

    Fekete, Gábor; Fodor, Emese; Pesznyák, Csilla

    2015-03-08

    A novel method has been put forward for very large electron beam profile measurement. With this method, absorbed dose profiles can be measured at any depth in a solid phantom for total skin electron therapy. Electron beam dose profiles were collected with two different methods. Profile measurements were performed at 0.2 and 1.2 cm depths with a parallel plate and a thimble chamber, respectively. 108cm × 108 cm and 45 cm × 45 cm projected size electron beams were scanned by vertically moving phantom and detector at 300 cm source-to-surface distance with 90° and 270° gantry angles. The profiles collected this way were used as reference. Afterwards, the phantom was fixed on the central axis and the gantry was rotated with certain angular steps. After applying correction for the different source-to-detector distances and incidence of angle, the profiles measured in the two different setups were compared. Correction formalism has been developed. The agreement between the cross profiles taken at the depth of maximum dose with the 'classical' scanning and with the new moving gantry method was better than 0.5 % in the measuring range from zero to 71.9 cm. Inverse square and attenuation corrections had to be applied. The profiles measured with the parallel plate chamber agree better than 1%, except for the penumbra region, where the maximum difference is 1.5%. With the moving gantry method, very large electron field profiles can be measured at any depth in a solid phantom with high accuracy and reproducibility and with much less time per step. No special instrumentation is needed. The method can be used for commissioning of very large electron beams for computer-assisted treatment planning, for designing beam modifiers to improve dose uniformity, and for verification of computed dose profiles.

  8. Fast electron current density profile and diffusion studies during LHCD in PBX-M

    International Nuclear Information System (INIS)

    Jones, S.E.; Kesner, J.; Luckhardt, S.; Paoletti, F.

    1993-08-01

    Successful current profile control experiments using lower hybrid current drive (LCHD) clearly require knowledge of (1) the location of the driven fast electrons and (2) the ability to maintain that location from spreading due to radial diffusion. These issues can be addressed by examining the data from the hard x-ray camera on PBX-M, a unique diagnostic producing two-dimensional, time resolved tangential images of fast electron bremsstrahlung. Using modeling, these line-of-sight images are inverted to extract a radial fast electron current density profile. We note that ''hollow'' profiles have been observed, indicative of off-axis current drive. These profiles can then be used to calculate an upper bound for an effective fast electron diffusion constant: assuming an extremely radially narrow lower hybrid absorption profile and a transport model based on Rax and Moreau, a model fast electron current density profile is calculated and compared to the experimentally derived profile. The model diffusion constant is adjusted until a good match is found. Applied to steady-state quiescent modes on PBX-M, we obtain an upper limit for an effective diffusion constant of about D*=1.1 m 2 /sec

  9. Determination of Jupiter's electron density profile from plasma wave observations

    International Nuclear Information System (INIS)

    Gurnett, D.A.; Scarf, F.L.; Kurth, W.S.; Shaw, R.R.; Poynter, R.L.

    1981-01-01

    This paper summarizes the electron density measurements obtained in the Jovian magnetosphere from the plasma wave instruments on the Voyager 1 and 2 spacecraft. Three basic techniques are discussed for determining the electron density: (1) local measurements from the low-frequency cutoff of continuum radiation, (2) local measurements from the frequency of upper hybrid resonance emissions, and (3) integral measurements from the dispersion of whistlers. The limitations and advantages of each technique are critically reviewed. In all cases the electron densities are unaffected by spacecraft charging or sheath effects, which makes these measurements of particular importance for verifying in situ plasma and low-energy charged particle measurments. In the outer regions of the dayside magnetosphere, beyond about 40 R/sub J/, the electron densities range from about 3 x 10 -3 to 3 x 10 -2 cm -3 . On Voyager 2, several brief excursions apparently occurred into the low-density region north of the plasma sheet with densities less than 10 -3 cm -3 . Approaching the planet the electron density gradually increases, with the plasma frequency extending above the frequency range of the plasma wave instrument (56 kHz, or about 38 electrons cm -3 ) inside of about 8 R/sub J/. Within the high-density region of the Io plasma torus, whistlers provide measurements of the north-south scale height of the plasma torus, with scale heights ranging from about 0.9 to 2.5 R/sub J/

  10. Estimation of edge electron temperature profiles via forward modelling of the electron cyclotron radiation transport at ASDEX Upgrade

    International Nuclear Information System (INIS)

    Rathgeber, S K; Barrera, L; Eich, T; Fischer, R; Suttrop, W; Wolfrum, E; Nold, B; Willensdorfer, M

    2013-01-01

    We present a method to obtain reliable edge profiles of the electron temperature by forward modelling of the electron cyclotron radiation transport. While for the core of ASDEX Upgrade plasmas, straightforward analysis of electron cyclotron intensity measurements based on the optically thick plasma approximation is usually justified, reasonable analysis of the steep and optically thin plasma edge needs to consider broadened emission and absorption profiles and radiation transport processes. This is carried out in the framework of integrated data analysis which applies Bayesian probability theory for joint analysis of the electron density and temperature with data of different interdependent and complementary diagnostics. By this means, electron cyclotron radiation intensity delivers highly spatially resolved electron temperature data for the plasma edge. In H-mode, the edge gradient of the electron temperature can be several times higher than the one of the radiation temperature. Furthermore, we are able to reproduce the ‘shine-through’ peak—the observation of increased radiation temperatures at frequencies resonant in the optically thin scrape-off layer. This phenomenon is caused by strongly down-shifted radiation of Maxwellian tail electrons located in the H-mode edge region and, therefore, contains valuable information about the electron temperature edge gradient. (paper)

  11. OTR profile measurement of a LINAC electron beam with portable ultra high-speed camera

    International Nuclear Information System (INIS)

    Mogi, T.; Nisiyama, S.; Tomioka, S.; Enoto, T.

    2004-01-01

    We have studied on and developed a portable ultra high-speed camera, and so applied to measurement of a LINAC electron beam. We measured spatial OTR profiles of a LINAC electron beam using this camera with temporal resolution 80ns. (author)

  12. Profile modification and hot electron temperature from resonant absorption at modest intensity

    International Nuclear Information System (INIS)

    Albritton, J.R.; Langdon, A.B.

    1980-01-01

    Resonant absorption is investigated in expanding plasmas. The momentum deposition associated with the ejection of hot electrons toward low density via wavebreaking readily exceeds that of the incident laser radiation and results in significant modification of the density profile at critical. New scaling of hot electron temperature with laser and plasma parameters is presented

  13. Taste profile characterization of white ginseng by electronic tongue ...

    African Journals Online (AJOL)

    Pg4) from white ginseng was checked using an electronic tongue. The bitterness and aftertaste-B of Pg3 were perceived as significantly higher than those of the other subfractions. The sourness of Pg2 had the highest rating compared to that of the other subfractions. The umami of Pg4 was higher than that of the other ...

  14. Electron temperature profiles in high power neutral-beam-heated TFTR [Tokamak Fusion Test Reactor] plasmas

    International Nuclear Information System (INIS)

    Taylor, G.; Grek, B.; Stauffer, F.J.; Goldston, R.J.; Fredrickson, E.D.; Wieland, R.M.; Zarnstorff, M.C.

    1987-09-01

    In 1986, the maximum neutral beam injection (NBI) power in the Tokamak Fusion Test Reactor (TFTR) was increased to 20 MW, with three beams co-parallel and one counter-parallel to I/sub p/. TFTR was operated over a wide range of plasma parameters; 2.5 19 19 m -3 . Data bases have been constructed with over 600 measured electron temperature profiles from multipoint TV Thomson scattering which span much of this parameter space. We have also examined electron temperature profile shapes from electron cyclotron emission at the fundamental ordinary mode and second harmonic extraordinary mode for a subset of these discharges. In the light of recent work on ''profile consistency'' we have analyzed these temperature profiles in the range 0.3 < (r/a) < 0.9 to determine if a profile shape exists which is insensitive to q/sub cyl/ and beam-heating profile. Data from both sides of the temperature profile [T/sub e/(R)] were mapped to magnetic flux surfaces [T/sub e/(r/a)]. Although T/sub e/(r/a), in the region where 0.3 < r/a < 0.9 was found to be slightly broader at lower q/sub cyl/, it was found to be remarkably insensitive to β/sub p/, to the fraction of NBI power injected co-parallel to I/sub p/, and to the heating profile going from peaked on axis, to hollow. 10 refs., 8 figs

  15. Electron momentum density and Compton profile by a semi-empirical approach

    Science.gov (United States)

    Aguiar, Julio C.; Mitnik, Darío; Di Rocco, Héctor O.

    2015-08-01

    Here we propose a semi-empirical approach to describe with good accuracy the electron momentum densities and Compton profiles for a wide range of pure crystalline metals. In the present approach, we use an experimental Compton profile to fit an analytical expression for the momentum densities of the valence electrons. This expression is similar to a Fermi-Dirac distribution function with two parameters, one of which coincides with the ground state kinetic energy of the free-electron gas and the other resembles the electron-electron interaction energy. In the proposed scheme conduction electrons are neither completely free nor completely bound to the atomic nucleus. This procedure allows us to include correlation effects. We tested the approach for all metals with Z=3-50 and showed the results for three representative elements: Li, Be and Al from high-resolution experiments.

  16. Experimental electron density profiles of the mid-latitude lower ionosphere and winter anomaly

    International Nuclear Information System (INIS)

    Rapoport, Z.Ts.; Sinel'nikov, V.M.

    1996-01-01

    Summarized measurements of high-latitude electron density profiles of N e lower ionosphere, obtained at M100B meteorological rockets by precision method of coherent frequencies during 1979-1990 at the Volgograd test site (φ = 48 deg 41' N; λ = 44 deg 21 E), are presented. The profiles obtained represent average values of electron density at various altitudes of lower ionosphere (h = 70-100 km) during night and day time hours in winter and non winter periods. Increased electron density values during daytime hours in winter are related to winter anomaly phenomenon. 36 refs.; 1 fig

  17. Electron density profiles in the background of LF absorption during Forbush-decrease and PSE

    International Nuclear Information System (INIS)

    Satori, G.

    1989-01-01

    Based on the simulation of different Forbush decrease and particle precipitation effects in the D region, electron density profiles in the mid-latitudes the ionospheric absorption of low frequency (LF) radio waves was determined. The absorption variations at different frequenceis are strongly affected by the shape of the electron density profile. A structure appears which sometimes resembles the letter S (in a sloping form). Both the height (around 70 to 72 km) and the depth of the local minimum in the electron density contribute to the computed absorption changes of various degree at different frequencies. In this way several observed special absorption events can be interpreted

  18. POLAND`S OUTWARD FOREIGN DIRECT INVESTMENT

    Directory of Open Access Journals (Sweden)

    Buczkowski Bogdan

    2013-07-01

    Full Text Available The paper contributes to the discussion of motives, determinants and effects of outward FDI of companies from emerging economies. We analyze the the scale, structure, geographical location and effects of Polish foreign direct investments as well as we prioritize their determinants. The interest of Polish companies in investing abroad has increased sharply over the last decade, due to the need to broaden the scale of business operations and geographical scope of their economic activities after the Poland`s accession to the European Union.

  19. Comparative study of the electron density profiles in the compact torus plasma merging experiments

    International Nuclear Information System (INIS)

    Hayashiya, Hitoshi; Asaka, Takeo; Katsurai, Makoto

    2003-01-01

    Following two previous papers on the comparative studies of the electron density distributions for a single compact torus (CT) and a spherical tokamak (ST), and for the a single ST and a merged ST, a comparative study on the dynamics of the electron density profile and after the CT and ST plasma merging process was performed. The sharpness of the peak in the electron density profile around the mid-plane just after the merging of CT with a low safety factor (q value) such as RFP or spheromak is found to be related to the speed of the magnetic axis during the plasma merging process. It is also found that the electron density gradient near the plasma edge in a high q ST is larger than that of a low q CT. High q ST is found to be provided with the magnetic structure which is able to sustain a large thermal pressure by a strong j x B force. Despite these differences in the electron density profile between CT and ST during merging, the confinement characteristics evaluated from the number of electrons confined within the magnetic separatrix after the completion of the merging is almost similar between in the merging CT and in the merging ST. For all configurations, the electron density profiles after the completion of the merging are analogous to those of the corresponding single configuration produced without the merging process. (author)

  20. Poland health system review.

    Science.gov (United States)

    Sagan, Anna; Panteli, Dimitra; Borkowski, W; Dmowski, M; Domanski, F; Czyzewski, M; Gorynski, Pawel; Karpacka, Dorota; Kiersztyn, E; Kowalska, Iwona; Ksiezak, Malgorzata; Kuszewski, K; Lesniewska, A; Lipska, I; Maciag, R; Madowicz, Jaroslaw; Madra, Anna; Marek, M; Mokrzycka, A; Poznanski, Darius; Sobczak, Alicja; Sowada, Christoph; Swiderek, Maria; Terka, A; Trzeciak, Patrycja; Wiktorzak, Katarzyna; Wlodarczyk, Cezary; Wojtyniak, B; Wrzesniewska-Wal, Iwona; Zelwianska, Dobrawa; Busse, Reinhard

    2011-01-01

    , particularly in areas such as pharmaceuticals, are highly regressive. The health status of the Polish population has improved substantially, with average life expectancy at birth reaching 80.2 years for women and 71.6 years for men in 2009. However, there is still a vast gap in life expectancy between Poland and the western European Union (EU) countries and between life expectancy overall and the expected number of years without illness or disability. Given its modest financial, human and material health care resources and the corresponding outcomes, the overall financial efficiency of the Polish system is satisfactory. Both allocative and technical efficiency leave room for improvement. Several measures, such as prioritizing primary care and adopting new payment mechanisms such as diagnosis-related groups (DRGs), have been introduced in recent years but need to be expanded to other areas and intensified. Additionally, numerous initiatives to enhance quality control and build the required expertise and evidence base for the system are also in place. These could improve general satisfaction with the system, which is not particularly high. Limited resources, a general aversion to cost-sharing stemming from a long experience with broad public coverage and shortages in health workforce need to be addressed before better outcomes can be achieved by the system. Increased cooperation between various bodies within the health and social care sectors would also contribute in this direction. The HiT profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services, and the role of the main actors in health systems; they describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. World

  1. Temperature profiles on the gadolinium surface during electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Ohba, Hironori; Shibata, Takemasa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1995-03-01

    The distributions of surface temperature of gadolinium in a water-cooled copper crucible during electron beam evaporation were measured by optical pyrometry. The surface temperatures were obtained from the radiation intensity ratio of the evaporating surface and a reference light source using Planck`s law of radiation. The emitted radiation from the evaporating surface and a reference source was detected by a CCD sensor through a band pass filter of 650 nm. The measured surface temperature generally agreed with those estimated from the deposition rate and the data of the saturated vapor pressure. At high input powers, it was found that the measured value had small difference with the estimated one due to variation of the surface condition. (author).

  2. Temperature profiles on the gadolinium surface during electron beam evaporation

    International Nuclear Information System (INIS)

    Ohba, Hironori; Shibata, Takemasa

    1995-01-01

    The distributions of surface temperature of gadolinium in a water-cooled copper crucible during electron beam evaporation were measured by optical pyrometry. The surface temperatures were obtained from the radiation intensity ratio of the evaporating surface and a reference light source using Planck's law of radiation. The emitted radiation from the evaporating surface and a reference source was detected by a CCD sensor through a band pass filter of 650 nm. The measured surface temperature generally agreed with those estimated from the deposition rate and the data of the saturated vapor pressure. At high input powers, it was found that the measured value had small difference with the estimated one due to variation of the surface condition. (author)

  3. Evolution of the electron temperature profile of ohmically heated plasmas in TFTR

    International Nuclear Information System (INIS)

    Taylor, G.; Efthimion, P.C.; Arunasalam, V.

    1985-08-01

    Blackbody electron cyclotron emission was used to ascertain and study the evolution and behavior of the electron temperature profile in ohmically heated plasmas in the Tokamak Fusion Test Reactor (TFTR). The emission was measured with absolutely calibrated millimeter wavelength radiometers. The temperature profile normalized to the central temperature and minor radius is observed to broaden substantially with decreasing limiter safety factor q/sub a/, and is insensitive to the plasma minor radius. Sawtooth activity was seen in the core of most TFTR discharges and appeared to be associated with a flattening of the electron temperature profile within the plasma core where q less than or equal to 1. Two types of sawtooth behavior were identified in large TFTR plasmas (minor radius, a less than or equal to 0.8 m) : a typically 35 to 40 msec period ''normal'' sawtooth, and a ''compound'' sawtooth with 70 to 80 msec period

  4. Development of a high-resolution electron-beam profile monitor using Fresnel zone plates

    International Nuclear Information System (INIS)

    Nakamura, Norio; Sakai, Hiroshi; Muto, Toshiya; Hayano, Hitoshi

    2004-01-01

    We present a high-resolution and real-time beam profile monitor using Fresnel zone plates (FZPs) developed in the KEK-ATF damping ring. The monitor system has an X-ray imaging optics with two FZPs. In this monitor, the synchrotron radiation from the electron beam at the bending magnet is monochromatized by a crystal monochromator and the transverse electron beam image is twenty-times magnified by the two FZPs and detected on an X-ray CCD camera. The expected spatial resolution for the selected photon energy of 3.235 keV is less than 1 μm. With the beam profile monitor, we succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. It is greatly expected that the beam profile monitor will be used in high-brilliance light sources and low-emittance accelerators. (author)

  5. Electron density and temperature profile diagnostics for C-2 field reversed configuration plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Deng, B. H.; Kinley, J. S.; Schroeder, J. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States)

    2012-10-15

    The 9-point Thomson scattering diagnostic system for the C-2 field reversed configuration plasmas is improved and the measured electron temperature profiles are consistent with theoretical expectations. Rayleigh scattering revealed a finite line width of the ruby laser emission, which complicates density calibration. Taking advantage of the plasma wobble motion, density profile reconstruction accuracy from the 6-chord two-color CO{sub 2}/HeNe interferometer data is improved.

  6. Teaching anthropology in Poland

    Czech Academy of Sciences Publication Activity Database

    Buchowski, M.; Červinková, Hana

    2016-01-01

    Roč. 5, č. 2 (2016), s. 47-51 E-ISSN 2239-625X Institutional support: RVO:68378076 Keywords : teaching anthropology * Poland * pedagogy * educational anthropology Subject RIV: AC - Archeology, Anthropology , Ethnology

  7. Determining of electron temperature profile on the cross section of a Tokamak, using ECE technique

    Directory of Open Access Journals (Sweden)

    M. Hosseinpour

    2007-06-01

    Full Text Available  In this paper we have used plasma electron cyclotron emissions at the second harmonic frequency of extraordinary mode to determine the temperature profile of the plasma produced in IR-T1 Tokamak. The emissions obtained at different frequencies by a 5-channel heterodyne receiver, have been analyzed to determine the spatial variation of the electron temperature on the plasma cross section. The results have been also used to show the three-dimensional time evolution of the temperature profile during the period of confinement.

  8. Real-time evaluation of electron and current density profile parameters on TEXTOR

    International Nuclear Information System (INIS)

    Bruessau, W.D.; Soltwisch, H.

    1985-08-01

    The shapes of electron and current density profiles are monitored in real-time mode in order to get rapid qualitative information on the development of a TEXTOR tokamak plasma. The profiles are described by form parameters which relate to the signals of a 9-channel FIR-polari/interferometer in simple mathematical formulae. These profile parameters are obtained by real-time conversion of measured quantities for display on a storage oscilloscope or on a chart recorder. The application of the parameters is demonstrated in some examples. (orig.)

  9. Electron temperature and density profiles measurement in the TJ-1 tokamak by Thomson scattering

    International Nuclear Information System (INIS)

    Pardo, C.; Zurro, B.

    1986-01-01

    Electron temperature and density profiles of ohmically heated hydrogen plasmas in the TJ-1 tokamak have been measured by Thomson scattering. The temperature profile peaks sharply in the central region while the density profile is very flat. Temperature values between 100 and 390 eV have been measured for densities in the range of 5.10 12 to 2.6.10 13 cm -3 . Parameters characterizing TJ-1 plasma, such as confinement times Z eff , have been deduced from experimental data. Energy confinement times are compared with experimental scaling laws. (author)

  10. Electron number density profiles derived from radio occultation on the CASSIOPE spacecraft

    DEFF Research Database (Denmark)

    Shume, E. B.; Vergados, P.; Komjathy, A.

    2017-01-01

    This paper presents electron number density profiles derived from high resolution Global Positioning System (GPS) radio occultation (RO) observations performed using the Enhanced Polar Outflow Probe (e-POP) payload on the high inclination CAScade, Smallsat and IOnospheric Polar Explorer (CASSIOPE...... good agreement with density profiles estimated from ionosonde data, measured over nearby stations to the latitude and longitude of the RO tangent points, (2) in good agreement with density profiles inferred from GPS RO measured by the Constellation Observing System for Meteorology, Ionosphere...

  11. Bayesian modeling of JET Li-BES for edge electron density profiles using Gaussian processes

    Science.gov (United States)

    Kwak, Sehyun; Svensson, Jakob; Brix, Mathias; Ghim, Young-Chul; JET Contributors Collaboration

    2015-11-01

    A Bayesian model for the JET lithium beam emission spectroscopy (Li-BES) system has been developed to infer edge electron density profiles. The 26 spatial channels measure emission profiles with ~15 ms temporal resolution and ~1 cm spatial resolution. The lithium I (2p-2s) line radiation in an emission spectrum is calculated using a multi-state model, which expresses collisions between the neutral lithium beam atoms and the plasma particles as a set of differential equations. The emission spectrum is described in the model including photon and electronic noise, spectral line shapes, interference filter curves, and relative calibrations. This spectral modeling gets rid of the need of separate background measurements for calculating the intensity of the line radiation. Gaussian processes are applied to model both emission spectrum and edge electron density profile, and the electron temperature to calculate all the rate coefficients is obtained from the JET high resolution Thomson scattering (HRTS) system. The posterior distributions of the edge electron density profile are explored via the numerical technique and the Markov chain Monte Carlo (MCMC) samplings. See the Appendix of F. Romanelli et al., Proceedings of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russia.

  12. Using elastic peak electron spectroscopy for enhanced depth resolution in sputter profiling

    International Nuclear Information System (INIS)

    Hofmann, S.; Kesler, V.

    2002-01-01

    Elastic peak electron spectroscopy (EPES) is an alternative to AES in sputter depth profiling of thin film structures. In contrast to AES, EPES depth profiling is not influenced by chemical effects. The high count rate ensures a good signal to noise ratio, that is lower measurement times and/or higher precision. In addition, because of the elastically scattered electrons travel twice through the sample, the effective escape depth is reduced, an important factor for the depth resolution function. Thus, the depth resolution is increased. EPES depth profiling was successfully applied to a Ge/Si multilayer structure. For an elastic peak energy of 1.0 keV the information depth is considerably lower (0.8 nm) as compared to the Ge (LMM, 1147 eV) peak (1.6 nm) used in AES depth profiling, resulting in a respectively improved depth resolution for EPES profiling under otherwise similar profiling conditions. EPES depth profiling is successfully applied to measure small diffusion lengths at Ge/Si interfaces of the order of 1 nm. (Authors)

  13. Radial profile of the electron distribution from electron cyclotron emission measurements

    Energy Technology Data Exchange (ETDEWEB)

    Tribaldos, V.; Krivenski, V.

    1993-07-01

    A numerical study is presented, showing the possibility to invert the electron distribution function from a small set of non-thermal spectra, for a regime of lower hybrid current drive. (Author) 7 refs.

  14. Radial profile of the electron distribution from electron cyclotron emission measurements

    International Nuclear Information System (INIS)

    Tribaldos, V.; Krivenski, V.

    1993-01-01

    A numerical study is presented, showing the possibility to invert the electron distribution function from a small set of non-thermal spectra, for a regime of lower hybrid current drive. (Author) 7 refs

  15. Role of substituents on the reactivity and electron density profile of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 5. Role of substituents on the reactivity and electron density profile of diimine ligands: A density functional theory based study. Bhakti S Kulkarni Deepti Mishra Sourav Pal. Volume 125 Issue 5 September 2013 pp 1247-1258 ...

  16. Spatial profiling of ion and neutral excitation in noble gas electron cyclotron resonance plasmas

    International Nuclear Information System (INIS)

    Rhoades, R.L.; Gorbatkin, S.M.

    1994-01-01

    Optical emission from neutrals and ions of several noble gases has been profiled in an electron cyclotron resonance plasma system. In argon plasmas with a net microwave power of 750 W, the neutral (696.5-nm) and ion (488-nm) emission profiles are slightly center peaked at 0.32 mTorr and gradually shift to a hollow appearance at 2.5 mTorr. Neon profiles show a similar trend from 2.5 to 10.0 mTorr. For the noble gases, transition pressure scales with the ionization potential of the gas, which is consistent with neutral depletion. Studies of noble gas mixtures, however, indicate that neutral depletion is not always dominant in the formation of hollow profiles. For Kr/Ar, Ar/Ne, and Ne/He plasmas, the majority gas tends to set the overall shape of the profile at any given pressure. For the conditions of the current system, plasma density appears to be more dominant than electron temperature in the formation of hollow profiles. The general method described is also a straightforward, inexpensive technique for measuring the spatial distribution of power deposited in plasmas, particularly where absolute scale can be calibrated by some other means

  17. Mars Global Surveyor Radio Science Electron Density Profiles: Interannual Variability and Implications for the Neutral Atmosphere

    Science.gov (United States)

    Bougher, S. W.; Engel, S.; Hinson, D. P.; Murphy, J. R.

    2003-01-01

    The Mars Global Surveyor (MGS) Radio Science (RS) experiment employs an ultrastable oscillator aboard the spacecraft. The signal from the oscillator to Earth is refracted by the Martian ionosphere, allowing retrieval of electron density profiles versus radius and geopotential. The present analysis is carried out on five sets of occultation measurements: (1) four obtained near northern summer solstice (Ls = 74-116, near aphelion) at high northern latitudes (64.7-77.6N), and (2) one set of profiles approaching equinox conditions (Ls = 135- 146) at high southern latitudes (64.7-69.1S). Electron density profiles (95 to 200 km) are examined over a narrow range of solar zenith angles (76.5-86.9 degrees) for local true solar times of (1) 3-4 hours and (2) 12.1 hours. Variations spanning 1-Martian year are specifically examined in the Northern hemisphere.

  18. Comparison of the observed results of the electron density profiles with the IRI90

    International Nuclear Information System (INIS)

    Zhang Manlian; Radicella, S.M.; Dai Kailiang

    1996-01-01

    The daily and composite profiles and the thickness parameter of the electron density profiles are compared with the results of IRI90 for the stations of Ramey (15.8 deg. N, 292.9 deg. E), Wuchang (30.6 deg. N, 114.3 deg. E), Chongqing (29.5 deg. N, 106.4 deg. E) and Wrumchi (43.8 deg. N, 87.6 deg. E). It is found that the electron density profiles produced by IRI90, both with the old Standard B0 and the new Gulyaeva-B0 thickness parameter, are too thick below F2-peak compared with the observed results. It is also shown that the IRI90 results show a very poor agreement with the observed results for the intermediate (F1) layer of the ionosphere. (author). 1 ref., 4 figs,

  19. Electron density profile measurements from hydrogen line intensity ratio method in Versatile Experimental Spherical Torus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, YooSung; Shi, Yue-Jiang, E-mail: yjshi@snu.ac.kr; Yang, Jeong-hun; Kim, SeongCheol; Kim, Young-Gi; Dang, Jeong-Jeung; Yang, Seongmoo; Jo, Jungmin; Chung, Kyoung-Jae [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Oh, Soo-Ghee [Division of Energy Systems Research, Ajou University, Suwon 442-749 (Korea, Republic of); Hwang, Y. S. [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Center for Advanced Research in Fusion Reactor Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of)

    2016-11-15

    Electron density profiles of versatile experiment spherical torus plasmas are measured by using a hydrogen line intensity ratio method. A fast-frame visible camera with appropriate bandpass filters is used to detect images of Balmer line intensities. The unique optical system makes it possible to take images of H{sub α} and H{sub β} radiation simultaneously, with only one camera. The frame rate is 1000 fps and the spatial resolution of the system is about 0.5 cm. One-dimensional local emissivity profiles have been obtained from the toroidal line of sight with viewing dumps. An initial result for the electron density profile is presented and is in reasonable agreement with values measured by a triple Langmuir probe.

  20. Reconstruction of the electron momentum distribution from a set of directional Compton profiles

    International Nuclear Information System (INIS)

    Hansen, N.K.

    1980-12-01

    A method is described in which the 3-dimensional one-electron momentum density distribution is obtained from a series of directional Compton profiles measured on single crystals; a directional Compton profile being the projection of the momentum density onto a line through the origin. The procedure consists of 1-dimensional Fourier transformations of the individual profiles. The Fourier transformed Compton profiles are fitted by a finite expansion in lattice harmonic functions, and the momentum density is finally obtained by a 3-dimensional Fourier transform. The effect of statistical errors are derived both for the momentum density and its Fourier transform. The problem of how to carry out the measurements in an optimal way has been approached and suggestions made. A computer program for calculation of momentum density and error distributions have been listed in an appendix. (orig.)

  1. Topside electron density: comparison of experimental and IRI model profiles during low solar activity period

    International Nuclear Information System (INIS)

    Alazo, K.; Coisson, P.; Radicella, S.M.

    2003-01-01

    The pattern of the topside electron density profiles is not yet very well represented by the IRI model. In this work the topside profiles obtained by the ISIS-2 satellite during low solar activity conditions are compared to those modeled by IRI. We take the quantitative parameter ε to measure the deviation of the model from the observed profiles. The results showed that the IRI overestimation of the topside profile is higher for low dip latitudes. The dispersion of the epsilon values is from 40 to 140%, more in equinoctial months and some lower for Winter. The best modeling is about 20% to 40% in middle and high latitudes of the North Hemisphere. (author)

  2. Beam profile measurement of ES-200 using secondary electron emission monitor

    Directory of Open Access Journals (Sweden)

    E Ebrahimi Basabi

    2015-09-01

    Full Text Available Up to now, different designs have been introduced for measurement beam profile accelerators. Secondary electron emission monitors (SEM are one of these devices which have been used for this purpose. In this work, a SEM has been constructed to measure beam profile of ES-200 accelerator, a proton electrostatic accelerator which is installed at SBU. Profile grid for both planes designed with 16 wires which are insulated relative to each other. The particles with maximum energy of 200 keV and maximum current of 400 μA are stopped in copper wires. Each of the wires has an individual current-to-voltage amplifier. With a multiplexer, the analogue values are transported to an ADC. The ADCs are read out by a microcontroller and finally profile of beam shows by a user interface program

  3. Multi-channel electronics for secondary emission grid profile monitor of TTF linac

    International Nuclear Information System (INIS)

    Reingardt-Nikoulin, P.; Gaidash, V.; Mirzojan, A.; Kocharyan, V.; Noelle, D.

    2004-01-01

    According to the TTF beam experimental program, a measurement f the time dependence of the energy spread within the bunch train should be done by means of a standard device for profile measurements, that is Secondary Emission Grid (SEMG). SEMG on the high-energy TTF beam is placed in the focal plane of the magnet spectrometer. It should measure the total energy spread in the range from 0.1% up to a few percents for any single or any group of electron bunches in the bunch train of TTF Linac. SEMG profile measurements with new high sensitive electronics are described. Beam results of SEMG Monitor test are given for two modifications of an electronic preamplifier

  4. Monte Carlo study of electron irradiation effect on YBCO dpa profiles

    International Nuclear Information System (INIS)

    Pinnera, I.; Cruz, C.; Abreu, Y.; Leyva, A.; Van Espen, P.

    2011-01-01

    The Monte Carlo assisted Classical Method (MCCM) consists on a calculation procedure for determining the displacements per atom (dpa) distribution in solid materials. This algorithm allows studying the gamma and electron irradiation damage in different materials. It is based on the electrons elastic scattering classic theories and the use of Monte Carlo simulation for the physical processes involved. The present study deals with the Monte Carlo simulation of electron irradiation effects on YBa 2 Cu 3 O 7-x (YBCO) slabs using the MCNPX code system. Displacements per atom distributions are obtained through the MCCM for electron irradiation up to 10 MeV. In-depth dpa profiles for electrons and positrons are obtained and analyzed. Also, for each atomic species in the material, the dpa distributions are calculated. All the results are discussed in the present contribution. (Author)

  5. Link between self-consistent pressure profiles and electron internal transport barriers in tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Razumova, K A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Andreev, V F [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Donne, A J H [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Hogeweij, G M D [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Lysenko, S E [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Shelukhin, D A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Spakman, G W [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Vershkov, V A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Zhuravlev, V A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation)

    2006-09-15

    Tokamak plasmas have a tendency to self-organization: the plasma pressure profiles obtained in different operational regimes and even in various tokamaks may be represented by a single typical curve, called the self-consistent pressure profile. About a decade ago local zones with enhanced confinement were discovered in tokamak plasmas. These zones are referred to as internal transport barriers (ITBs) and they can act on the electron and/or ion fluid. Here the pressure gradients can largely exceed the gradients dictated by profile consistency. So the existence of ITBs seems to be in contradiction with the self-consistent pressure profiles (this is also often referred to as profile resilience or profile stiffness). In this paper we will discuss the interplay between profile consistency and ITBs. A summary of the cumulative information obtained from T-10, RTP and TEXTOR is given, and a coherent explanation of the main features of the observed phenomena is suggested. Both phenomena, the self-consistent profile and ITB, are connected with the density of rational magnetic surfaces, where the turbulent cells are situated. The distance between these cells determines the level of their interaction, and therefore the level of the turbulent transport. This process regulates the plasma pressure profile. If the distance is wide, the turbulent flux may be diminished and the ITB may be formed. In regions with rarefied surfaces the steeper pressure gradients are possible without instantaneously inducing pressure driven instabilities, which force the profiles back to their self-consistent shapes. Also it can be expected that the ITB region is wider for lower dq/d{rho} (more rarefied surfaces)

  6. To understand Poland / Joanna Bar

    Index Scriptorium Estoniae

    Bar, Joanna

    2003-01-01

    Uurimustest Poola igapäevaelu kohta Nõukogude perioodil : Wedel, Janine. The private Poland : an anthropologist look at everyday life ; Dziğiel, Leszek. Paradise in a concrete cage : daily life in communist Poland. Krak̤w, 1998

  7. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    International Nuclear Information System (INIS)

    Delsim-Hashemi, Hossein

    2008-09-01

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e + e - colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 μJ) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  8. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Delsim-Hashemi, Hossein

    2008-09-15

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e{sup +}e{sup -} colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 {mu}J) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  9. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    International Nuclear Information System (INIS)

    Wissmann, Laurens-Georg

    2012-08-01

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  10. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wissmann, Laurens-Georg

    2012-08-15

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  11. Poland's Syndrome: A Case Report

    African Journals Online (AJOL)

    jen

    The Poland's anomaly was first described in 1841 by Sir Alfred Poland as a syndrome presenting with absence or underdevelopment of pectoralis ... He was the second child in a family of four. There was no familial history of similar .... hypoplasia: a middle degree of Poland syndrome. Acta Radiologica 1996; 37: 759-762. 8.

  12. Algorithm Development for Multi-Energy SXR based Electron Temperature Profile Reconstruction

    Science.gov (United States)

    Clayton, D. J.; Tritz, K.; Finkenthal, M.; Kumar, D.; Stutman, D.

    2012-10-01

    New techniques utilizing computational tools such as neural networks and genetic algorithms are being developed to infer plasma electron temperature profiles on fast time scales (> 10 kHz) from multi-energy soft-x-ray (ME-SXR) diagnostics. Traditionally, a two-foil SXR technique, using the ratio of filtered continuum emission measured by two SXR detectors, has been employed on fusion devices as an indirect method of measuring electron temperature. However, these measurements can be susceptible to large errors due to uncertainties in time-evolving impurity density profiles, leading to unreliable temperature measurements. To correct this problem, measurements using ME-SXR diagnostics, which use three or more filtered SXR arrays to distinguish line and continuum emission from various impurities, in conjunction with constraints from spectroscopic diagnostics, can be used to account for unknown or time evolving impurity profiles [K. Tritz et al, Bull. Am. Phys. Soc. Vol. 56, No. 12 (2011), PP9.00067]. On NSTX, ME-SXR diagnostics can be used for fast (10-100 kHz) temperature profile measurements, using a Thomson scattering diagnostic (60 Hz) for periodic normalization. The use of more advanced algorithms, such as neural network processing, can decouple the reconstruction of the temperature profile from spectral modeling.

  13. Poland- Ukraine Relations

    Directory of Open Access Journals (Sweden)

    Andrzej Szeptycki

    2016-01-01

    Full Text Available Poland and Ukraine are the two biggest and most populated countries of Central and Eastern Europe. Because of their size, neighbourhood and position in the region the two countries have often been compared to France and Germany. Both countries are deeply interested in their mutual cooperation. Such situation steams from five factors: direct neighbourhood, common (albeit difficult history, attractiveness of the Polish labour market for the Ukrainians, membership of Poland in the Western structures, and last but not least, the Russian threat. Despite complimentary interests, both countries have difficulty to effectively develop their mutual relations and turn them into a real “strategic partnership”. These problems are due to the internal political and economic situation in Ukraine, limits imposed by the membership of Poland in the EU, Russian policy aiming at keeping Ukraine within its zone of influence and, finally, the EU reluctance to effectively engage in Ukraine.

  14. Electron density profile reconstruction by maximum entropy method with multichannel HCN laser interferometer system on SPAC VII

    International Nuclear Information System (INIS)

    Kubo, S.; Narihara, K.; Tomita, Y.; Hasegawa, M.; Tsuzuki, T.; Mohri, A.

    1988-01-01

    A multichannel HCN laser interferometer system has been developed to investigate the plasma electron confinement properties in SPAC VII device. Maximum entropy method is applied to reconstruct the electron density profile from measured line integrated data. Particle diffusion coefficient in the peripheral region of the REB ring core spherator was obtained from the evolution of the density profile. (author)

  15. Thomson scattering on argon surfatron plasmas at intermediate pressures: Axial profiles of the electron temperature and electron density

    International Nuclear Information System (INIS)

    Palomares, J.M.; Iordanova, E.; Veldhuizen, E.M. van; Baede, L.; Gamero, A.; Sola, A.; Mullen, J.J.A.M. van der

    2010-01-01

    The axial profiles of the electron density n e and electron temperature T e of argon surfatron plasmas in the pressure range of 6-20 mbar and microwave power between 32 and 82 W have been determined using Thomson Scattering of laser irradiation at 532 nm. For the electron density and temperature we found values in the ranges 5 x 10 18 e 19 m -3 and 1.1 e e and T e down to 8% and 3%, respectively. It is found that n e decreases in the direction of the wave propagation with a slope that is nearly constant. The slope depends on the pressure but not on the power. Just as predicted by theories we see that increasing the power leads to longer plasma columns. However, the plasmas are shorter than what is predicted by theories based on the assumption that for the plasma-wave interaction electron-atom collisions are of minor importance (the so-called collisionless regime). The plasma vanishes long before the critical value of the electron density is reached. In contrast to what is predicted by the positive column model it is found that T e does not stay constant along the column, but monotonically increases with the distance from the microwave launcher. Increases of more than 50% over 30 cm were found.

  16. Electron beam based transversal profile measurements of intense ion beams; Elektronenstrahl-Diagnostik zur Bestimmung vom transversalen Profil intensiver Ionenstrahlen

    Energy Technology Data Exchange (ETDEWEB)

    El Moussati, Said

    2014-11-03

    A non-invasive diagnostic method for the experimental determination of the transverse profile of an intense ion beam has been developed and investigated theoretically as well as experimentally within the framework of the present work. The method is based on the deflection of electrons when passing the electromagnetic field of an ion beam. To achieve this an electron beam is employed with a specifically prepared transversal profile. This distinguish this method from similar ones which use thin electron beams for scanning the electromagnetic field [Roy et al. 2005; Blockland10]. The diagnostic method presented in this work will be subsequently called ''Electron-Beam-Imaging'' (EBI). First of all the influence of the electromagnetic field of the ion beam on the electrons has been theoretically analyzed. It was found that the magnetic field causes only a shift of the electrons along the ion beam axis, while the electric field only causes a shift in a plane transverse to the ion beam. Moreover, in the non-relativistic case the magnetic force is significantly smaller than the Coulomb one and the electrons suffer due to the magnetic field just a shift and continue to move parallel to their initial trajectory. Under the influence of the electric field, the electrons move away from the ion beam axis, their resulting trajectory shows a specific angle compared to the original direction. This deflection angle practically depends just on the electric field of the ion beam. Thus the magnetic field has been neglected when analysing the experimental data. The theoretical model provides a relationship between the deflection angle of the electrons and the charge distribution in the cross section of the ion beam. The model however only can be applied for small deflection angles. This implies a relationship between the line-charge density of the ion beam and the initial kinetic energy of the electrons. Numerical investigations have been carried out to clarify the

  17. 2D electron density profile measurement in tokamak by laser-accelerated ion-beam probe.

    Science.gov (United States)

    Chen, Y H; Yang, X Y; Lin, C; Wang, L; Xu, M; Wang, X G; Xiao, C J

    2014-11-01

    A new concept of Heavy Ion Beam Probe (HIBP) diagnostic has been proposed, of which the key is to replace the electrostatic accelerator of traditional HIBP by a laser-driven ion accelerator. Due to the large energy spread of ions, the laser-accelerated HIBP can measure the two-dimensional (2D) electron density profile of tokamak plasma. In a preliminary simulation, a 2D density profile was reconstructed with a spatial resolution of about 2 cm, and with the error below 15% in the core region. Diagnostics of 2D density fluctuation is also discussed.

  18. Development of Optical Fiber Technology in Poland, International Journal of Electronics and Telecommunication, vol. 57, no 2, pp.191-197, July 2011

    CERN Document Server

    Dorosz, J

    2011-01-01

    In this paper, the authors, chairmen of the 13th Conference on Optical Fibers and Their Applications OFA2011, and editors of the conference proceedings summarize the development of optical fiber technology in Poland (during the period of 2009- 2011) on the basis of papers presented there and consecutively published in this volume. The digest is thus not full but covers the periodically presented material every 18 months during the meetings on optical fibers in Białystok-Białowie˙za and Lublin- Krasnobród. OFC systems are developed for HEP experiments and accelerators. OFC systems are also developed for virtual atomic clocks. EuCARD information presentation was organized during this meeting. Keywords— optical fibers, optical communication systems, photonic sources and detectors, photonic sensors, integrated optics, photonics applications, photonic materials.

  19. Water Management in Poland

    Directory of Open Access Journals (Sweden)

    Wojciech Majewski

    2015-03-01

    Full Text Available This paper presents the current situation in Polish water resources management. Discussed here are measures taken by the Ministry of Environment to introduce a new water law, as well as reforms of water management in Poland. The state of water resources in Poland are described, and the actions needed to improve this situation, taking into account possible climate changes and their impact on the use of water resources. Critically referred to is the introduction by the Ministry of Environment of charges for water abstraction by hydro power plants, and adverse effects for the energy and water management sectors are discussed.

  20. The improved DGR analytical model of electron density height profile and total electron content in the ionosphere

    OpenAIRE

    Radicella, S. M.; Zhang, M. L.

    1995-01-01

    Tests of the analytical model of the electron density profile originally proposed by G, Di Giovanni and S.M. Radicella (DGR model) have shown the need to introduce improvements in order to obtain a model able to reproduce the ionosphere in a larger spectrum of geophysical and time conditions. The present paper reviews the steps toward such progress and presents the final formulation of the model. It gives also a brief re- view of tests of the improved model done by different authors.

  1. Comparison of ONETRAN calculations of electron beam dose profiles with Monte Carlo and experiment

    International Nuclear Information System (INIS)

    Garth, J.C.; Woolf, S.

    1987-01-01

    Electron beam dose profiles have been calculated using a multigroup, discrete ordinates solution of the Spencer-Lewis electron transport equation. This was accomplished by introducing electron transport cross-sections into the ONETRAN code in a simple manner. The authors' purpose is to ''benchmark'' this electron transport model and to demonstrate its accuracy and capabilities over the energy range from 30 keV to 20 MeV. Many of their results are compared with the extensive measurements and TIGER Monte Carlo data. In general the ONETRAN results are smoother, agree with TIGER within the statistical error of the Monte Carlo histograms and require about one tenth the running time of Monte Carlo

  2. Hollow density profile on electron cyclotron resonance heating JFT-2M plasma

    International Nuclear Information System (INIS)

    Yamauchi, Toshihiko; Hoshino, Katsumichi; Kawashima, Hisato; Ogawa, Toshihide; Kawakami, Tomohide; Shiina, Tomio; Ishige, Youichi

    1998-01-01

    The first hollow electron density profile in the central region on the JAERI Fusion Torus-2M (JFT-2M) is measured during electron cyclotron resonance heating (ECRH) with a TV Thomson scattering system (TVTS). The peripheral region is not hollow but is accumulated due to pump-out from the central region. The hollowness increases with time but is saturated at ∼40 ms and maintains a constant hollow ratio. The hollowness is strongly related to the steep temperature gradient of the heated zone. (author)

  3. Measurements made in the SPS with a rest gas profile monitor by collecting electrons

    International Nuclear Information System (INIS)

    Fischer, C.; Koopman, J.

    2000-01-01

    Measurements have regularly been performed during the 1999 run, using the Rest Gas Monitor installed in the SPS. The exploited signal resulted from electrons produced by ionization of the rest gas during the circulating beam passage. A magnetic field parallel to the electric extraction field was applied to channel the electrons. Proton beam horizontal transverse distributions were recorded during entire SPS acceleration cycles, between 14 GeV/c and 450 GeV/c and for different beam structures and bunch intensities. The influence of several parameters on the measured beam profiles was investigated. Results are presented and analyzed in order to determine the performance that can be expected

  4. Observation of Flat Electron Temperature Profiles in the Lithium Tokamak Experiment

    International Nuclear Information System (INIS)

    Boyle, D. P.; Majeski, R.; Schmitt, J. C.; Auburn University, AL; Hansen, C.

    2017-01-01

    It has been predicted for over a decade that low-recycling plasma-facing components in fusion devices would allow high edge temperatures and flat or nearly flat temperature profiles. In recent experiments with lithium wall coatings in the Lithium Tokamak Experiment (LTX), a hot edge (> 200 eV) and flat electron temperature profiles have been measured following the termination of external fueling. In this work, reduced recycling was demonstrated by retention of ~ 60% of the injected hydrogen in the walls following the discharge. Electron energy confinement followed typical Ohmic confinement scaling during fueling, but did not decrease with density after fueling terminated, ultimately exceeding the scaling by ~ 200% . Lastly, achievement of the low-recycling, hot edge regime has been an important goal of LTX and lithium plasma-facing component research in general, as it has potentially significant implications for the operation, design, and cost of fusion devices.

  5. Modelling of the electron density height profiles in the mid-latitude ionospheric D-region

    Directory of Open Access Journals (Sweden)

    P. Y. Mukhtarov

    1996-06-01

    Full Text Available A new mid-latitude D-region (50-105 km model of the electron density is presented obtained on the basis of a full wave theory and by a trial-and-error inversion method. Daytime (at different solar zenith angles absorption measurements by A3-technique made in Bulgaria yielded data with the aid of which the seasonal and diurnal courses of the Ne(h-profiles were derived. Special attention is drawn to the event diurnal asymmetry, or uneven formation of the ionosphere as a function of insulation. The latter is probably connected with the influence of the diurnal fluctuations in the local temperature on the chemistry involved in the electron loss rate, as well as the diurnal variations of the main ionizing agent (NO in the D-region. That is why the Ne(h-profiles in the midlatitude D-region are modelled separately for morning and afternoon hours.

  6. Electron bunch profile reconstruction in the few fs regime using coherent Smith-Purcell radiation

    International Nuclear Information System (INIS)

    Bartolini, R; Delerue, N; Doucas, G; Reichold, A; Clarke, C

    2012-01-01

    Advanced accelerators for fourth generation light sources based on high brightness linacs or laser-driven wakefield accelerators will operate with intense, highly relativistic electron bunches that are only a few fs long. Diagnostic techniques for the determination of temporal profile of such bunches are required to be non invasive, single shot, economic and with the required resolution in the fs regime. The use of a radiative process such as coherent Smith-Purcell radiation (SPR), is particularly promising with this respect. In this technique the beam is made to radiate a small amount of electromagnetic radiation and the temporal profile is reconstructed from the measured spectral distribution of the radiation. We summarise the advantages of SPR and present the design parameters and preliminary results of the experiments at the FACET facility at SLAC. We also discuss a new approach to the problem of the recovery of the 'missing phase', which is essential for the accurate reconstruction of the temporal bunch profile.

  7. Electron density profile determination by means of laser blow-off injected neutral beam

    International Nuclear Information System (INIS)

    Kocsis, G.; Bakos, J.S.; Ignacz, P.N.; Kardon, B.; Koltai, L.; Veres, G.

    1992-01-01

    This paper is devoted to the experimental and theoretical studies of the determination of the electron density profiles by means of laser blow-off neutrals. For the determination of the density profile the time and spatial distributions of the spectral line radiation intensity of the injected neutrals are used. The method is compared to other previously proposed methods and the advantages and disadvantages of the different methods are discussed. The result of the comparison is that our method gives the most reliable result with the highest temporal resolution for the density profile of the edge plasma. The only disadvantage is the need of careful calibration of the sensitivity of the spatial channels. The advantage is the ability of the method as a standard diagnostic. (orig.)

  8. Electron Bunch Profile Reconstruction in the Few fs Regime using Coherent Smith-Purcell Radiation

    International Nuclear Information System (INIS)

    Bartolini, R.; Clarke, C.; Delerue, N.; Doucasa, G.; Reicholda, A.

    2012-01-01

    Advanced accelerators for fourth generation light sources based on high brightness linacs or laser-driven wakefield accelerators will operate with intense, highly relativistic electron bunches that are only a few fs long. Diagnostic techniques for the determination of temporal profile of such bunches are required to be non invasive, single shot, economic and with the required resolution in the fs regime. The use of a radiative process such as coherent Smith-Purcell radiation (SPR), is particularly promising with this respect. In this technique the beam is made to radiate a small amount of electromagnetic radiation and the temporal profile is reconstructed from the measured spectral distribution of the radiation. We summarise the advantages of SPR and present the design parameters and preliminary results of the experiments at the FACET facility at SLAC. We also discuss a new approach to the problem of the recovery of the 'missing phase', which is essential for the accurate reconstruction of the temporal bunch profile.

  9. 2-D Low Energy Electron Beam Profile Measurement Based on Computer Tomography Algorithm with Multi-Wire Scanner

    CERN Document Server

    Yu, Nengjie; Li Qing Feng; Tang, Chuan-Xiang; Zheng, Shuxin

    2005-01-01

    A new method for low energy electron beam profile measurement is advanced, which presents a full 2-D beam profile distribution other than the traditional 2-D beam profile distribution given by 1-D vertical and horizontal beam profiles. The method is based on the CT (Computer Tomography) algorithm. Multi-sets of data about the 1-D beam profile projections are attained by rotating the multi-wire scanner. Then a 2-D beam profile is reconstructed from these projections with CT algorithm. The principle of this method is presented. The simulation and the experiment results are compared and analyzed in detail.

  10. An analytical approach to characterize morbidity profile dissimilarity between distinct cohorts using electronic medical records

    OpenAIRE

    Schildcrout, Jonathan S.; Basford, Melissa A.; Pulley, Jill M.; Masys, Daniel R.; Roden, Dan M.; Wang, Deede; Chute, Christopher G.; Kullo, Iftikhar J.; Carrell, David; Peissig, Peggy; Kho, Abel; Denny, Joshua C.

    2010-01-01

    We describe a two-stage analytical approach for characterizing morbidity profile dissimilarity among patient cohorts using electronic medical records. We capture morbidities using the International Statistical Classification of Diseases and Related Health Problems (ICD-9) codes. In the first stage of the approach separate logistic regression analyses for ICD-9 sections (e.g., “hypertensive disease” or “appendicitis”) are conducted, and the odds ratios that describe adjusted differences in pre...

  11. The utilization of electronic computers for bone density measurements with iodine 125 profile scanner

    International Nuclear Information System (INIS)

    Reiners, C.

    1974-01-01

    The utilization of electronic computers in the determination of the mineral content in bone with the 125 I profile scanner offers many advantages. The computer considerably lessens intensive work of routine evaluation. It enables the direct calculation of the attenuation coefficients. This means a greater accuracy and correctness of the results compared to the former 'graphical' method, as the approximations are eliminated and reference errors are avoided. (orig./LH) [de

  12. Profile consistency, anomalous electron thermal conduction, and confinement analysis of tokamak devices

    International Nuclear Information System (INIS)

    Qu Wenxiao

    1992-01-01

    Assuming that there exists a position in the tokamak plasma where the energy transport is dominated by local anomalous electron thermal conduction and taking advantage of the basic experimental result usually referred to as profile consistency, the authors obtain a more convincing approach to the description of the confinement property of tokamak devices without touching upon the physical mechanism of global plasma energy transport. 8 refs

  13. Pollution problems plague Poland

    International Nuclear Information System (INIS)

    Bajsarowicz, J.F.

    1989-01-01

    Poland's environmental problems are said to stem from investments in heavy industries that require enormous quantities of power and from the exploitation of two key natural resources: coal and sulfur. Air and water pollution problems and related public health problems are discussed

  14. Power Dependence of the Electron Mobility Profile in a Hall Thruster

    Science.gov (United States)

    Jorns, Benjamin A.; Hofery, Richard H.; Mikellides, Ioannis G.

    2014-01-01

    The electron mobility profile is estimated in a 4.5 kW commercial Hall thruster as a function of discharge power. Internal measurements of plasma potential and electron temperature are made in the thruster channel with a high-speed translating probe. These measurements are presented for a range of throttling conditions from 150 - 400 V and 0.6 - 4.5 kW. The fluid-based solver, Hall2De, is used in conjunction with these internal plasma parameters to estimate the anomalous collision frequency profile at fixed voltage, 300 V, and three power levels. It is found that the anomalous collision frequency profile does not change significantly upstream of the location of the magnetic field peak but that the extent and magnitude of the anomalous collision frequency downstream of the magnetic peak does change with thruster power. These results are discussed in the context of developing phenomenological models for how the collision frequency profile depends on thruster operating conditions.

  15. Properties of ion temperature gradient and trapped electron modes in tokamak plasmas with inverted density profiles

    Science.gov (United States)

    Du, Huarong; Jhang, Hogun; Hahm, T. S.; Dong, J. Q.; Wang, Z. X.

    2017-12-01

    We perform a numerical study of linear stability of the ion temperature gradient (ITG) mode and the trapped electron mode (TEM) in tokamak plasmas with inverted density profiles. A local gyrokinetic integral equation is applied for this study. From comprehensive parametric scans, we obtain stability diagrams for ITG modes and TEMs in terms of density and temperature gradient scale lengths. The results show that, for the inverted density profile, there exists a normalized threshold temperature gradient above which the ITG mode and the TEM are either separately or simultaneously unstable. The instability threshold of the TEM for the inverted density profile is substantially different from that for normal and flat density profiles. In addition, deviations are found on the ITG threshold from an early analytic theory in sheared slab geometry with the adiabatic electron response [T. S. Hahm and W. M. Tang, Phys. Fluids B 1, 1185 (1989)]. A possible implication of this work on particle transport in pellet fueled tokamak plasmas is discussed.

  16. Topside ionospheric vertical electron density profile reconstruction using GPS and ionosonde data: possibilities for South Africa

    Directory of Open Access Journals (Sweden)

    P. Sibanda

    2011-02-01

    Full Text Available Successful empirical modeling of the topside ionosphere relies on the availability of good quality measured data. The Alouette, ISIS and Intercosmos-19 satellite missions provided large amounts of topside sounder data, but with limited coverage of relevant geophysical conditions (e.g., geographic location, diurnal, seasonal and solar activity by each individual mission. Recently, methods for inferring the electron density distribution in the topside ionosphere from Global Positioning System (GPS-based total electron content (TEC measurements have been developed. This study is focused on the modeling efforts in South Africa and presents the implementation of a technique for reconstructing the topside ionospheric electron density (Ne using a combination of GPS-TEC and ionosonde measurements and empirically obtained Upper Transition Height (UTH. The technique produces reasonable profiles as determined by the global models already in operation. With the added advantage that the constructed profiles are tied to reliable measured GPS-TEC and the empirically determined upper transition height, the technique offers a higher level of confidence in the resulting Ne profiles.

  17. Nuclear Physics in Poland

    International Nuclear Information System (INIS)

    Wroblewski, A.K.

    2004-01-01

    Full text: This will be a short presentation of low and high energy nuclear physics in Poland, its history, essential results, and the present status. Nuclear physics in Poland has a tradition of hundred years. Research started just after the discovery of radium and polonium by Polish-born Maria Sklodowska-Curie and her husband Pierre Curie. Maria Sklodowska-Curie employed numerous Polish assistants in her Paris laboratory and supported radioactivity studies in Warsaw, her birth place, then under the occupation of tsarist Russia. In the first decades of the XXth century Poland was one of the leading countries in radioactivity studies. In the late 1930-ies a cyclotron was constructed in Warsaw and an ambitious 'Star of Poland' project was launched to study the cosmic rays. Unfortunately, the Second World War stopped all scientific activity in Poland. A large fraction of Polish physicists perished in the period 1939-1945. After the World War nuclear physics of low and high energy was rebuilt in Warsaw and Krakow. Already in 1952 Marian Danysz and Jerzy Pniewski discovered the first hypernucleus. This important discovery was essential to understand the properties of numerous new particles found in cosmic rays. Polish physicists entered intensive collaboration with both CERN and Dubna and took part also in research at other centers in Europe (DESY, GSI, GANIL, Julich, SACLAY) and the United States (Fermilab). At present the research is concentrated in Warsaw and Krakow (the two largest centers), and smaller teams, mostly theorists, are also in Bialystok, Katowice, Kielce, Lublin, Lodz and Wroclaw. Several years ago a heavy ion cyclotron was built in Warsaw. Among the important discoveries made by Polish nuclear physicists one may mention the theoretical works on superheavy elements and the recent discovery of the two-proton radioactivity

  18. Measurement of an electron-beam size with a beam profile monitor using Fresnel zone plates

    International Nuclear Information System (INIS)

    Iida, K.; Nakamura, N.; Sakai, H.; Shinoe, K.; Takaki, H.; Fujisawa, M.; Hayano, H.; Nomura, M.; Kamiya, Y.; Koseki, T.; Amemiya, Y.; Aoki, N.; Nakayama, K.

    2003-01-01

    We present a non-destructive and real-time beam profile monitor using Fresnel zone plates (FZPs) and the measurement of an electron-beam size with this monitor in the KEK-Accelerator Test Facility (ATF) damping ring. The monitor system has the structure of a long-distance X-ray microscope, where two FZPs constitute an X-ray imaging optics. The synchrotron radiation from the electron beam at the bending magnet is monochromatized by a crystal monochromator and the transverse electron beam image is twenty times magnified by the two FZPs and detected on an X-ray CCD camera. The expected spatial resolution for the selected photon energy of 3.235 keV is sufficiently high to measure the horizontal and vertical beam sizes of the ATF damping ring. With the beam profile monitor, we succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. The measured magnification of the X-ray imaging optics in the monitor system was in good agreement with the design value

  19. Thomson scattering on argon surfatron plasmas at intermediate pressures: Axial profiles of the electron temperature and electron density

    Energy Technology Data Exchange (ETDEWEB)

    Palomares, J.M., E-mail: f02palij@gmail.co [Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain); Iordanova, E.; Veldhuizen, E.M. van; Baede, L. [Department of Applied Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Gamero, A.; Sola, A. [Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain); Mullen, J.J.A.M. van der, E-mail: j.j.a.m.v.d.Mullen@tue.n [Department of Applied Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain)

    2010-03-15

    The axial profiles of the electron density n{sub e} and electron temperature T{sub e} of argon surfatron plasmas in the pressure range of 6-20 mbar and microwave power between 32 and 82 W have been determined using Thomson Scattering of laser irradiation at 532 nm. For the electron density and temperature we found values in the ranges 5 x 10{sup 18} < n{sub e} < 8 x 10{sup 19} m{sup -3} and 1.1 < T{sub e} < 2.0 eV. Due to several improvements of the setup we could reduce the errors of n{sub e} and T{sub e} down to 8% and 3%, respectively. It is found that n{sub e} decreases in the direction of the wave propagation with a slope that is nearly constant. The slope depends on the pressure but not on the power. Just as predicted by theories we see that increasing the power leads to longer plasma columns. However, the plasmas are shorter than what is predicted by theories based on the assumption that for the plasma-wave interaction electron-atom collisions are of minor importance (the so-called collisionless regime). The plasma vanishes long before the critical value of the electron density is reached. In contrast to what is predicted by the positive column model it is found that T{sub e} does not stay constant along the column, but monotonically increases with the distance from the microwave launcher. Increases of more than 50% over 30 cm were found.

  20. Interaction of the modulated electron beam with inhomogeneous plasma: plasma density profile deformation and langmuir waves excitation

    International Nuclear Information System (INIS)

    Anisimov, I.O.; Kelnyk, O.I.; Soroka, S.V.; Siversky, T.V.

    2005-01-01

    Nonlinear deformation of the initially linear plasma density profile due to the modulated electron beam is studied via computer simulation. In the initial time period the field slaves to the instantaneous profile of the plasma density. Langmuir waves excitation is suppressed by the density profile deformation. The character of the plasma density profile deformation for the late time period depends significantly on the plasma properties. Particularly, for plasma with hot electrons quasi-periodic generation of ion-acoustic pulses takes place in the vicinity of the initial point of plasma resonance

  1. ICRF power deposition profile and determination of the electron thermal diffusivity by modulation experiments in JET

    International Nuclear Information System (INIS)

    Gambier, D.J.; Evrard, M.P.; Adam, J.

    1990-01-01

    The power deposition profile in the ion cyclotron range of frequencies (ICRF) has been investigated experimentally in JET by means of a square wave modulated RF perturbation. The study has been conducted in D(H) and D( 3 He) plasmas for two heating scenarios. In D( 3 He) plasmas and for central heating in a scenario where mode conversion to Bernstein waves is accessible, the direct power deposition profile on electrons has been derived. It accounts for 15% of the total coupled power and extends over 25% of the minor radius. Outside the RF power deposition zone, the electron thermal diffusivity χ e inside the inversion radius surface (r i ) can be estimated through observation of the diffusive electronic transport. In discharges without monster sawteeth and for a low central temperature gradient (∇T e (r ≤ r i ) ≤ ∇T e (r ≥ r i ) approx. = 5 keV·m -1 ) the value obtained is small (approx. =0.24 +- 0.05 m 2 · s -1 ), typically ten times lower than χ e values deduced from heat pulse propagation in similar discharges at radii larger than the inversion radius. For the D(H) minority heating scheme, a large fraction of the ICRF modulated power is absorbed by minority ions, and the minority tail is modulated with a characteristic ion-electron (i-e) slowing-down time. In this scheme, electron heating occurs only through collisions with the minority ion tail and no modulation of the electron temperature is observed in sawtoothing discharges. This is interpreted as a consequence of the long i-e equipartition time, acting as an integrator for the modulated ICRF signal. Finally, a correlation between the time of the sawtooth crash and the periodic turn-off of the ICRF power is found and its consequence for modulation experiments is reviewed. (author). 22 refs, 16 figs

  2. Marketing of organic products in southern Poland

    Directory of Open Access Journals (Sweden)

    Kuboń Maciej

    2018-01-01

    Full Text Available The article presents an outline of the issue concerning formulation of a marketing strategy and the possibility of using the knowledge on consumers' preferences for organic development of farms and their products on the example of southern Poland. The paper analyses the distribution process of organic food in the aspect of developing innovative marketing strategies. The studies were performed in 50 organic farms and on the example of 100 respondents from the region of southern Poland. In the opinion of the surveyed representatives of the organic food producers, a competitive advantage of their offer depends the most on the health values, brand, reputation, and taste. Moreover, information on products and the form and place of their sale are significant. The analysis shows that the knowledge is the most eagerly obtained from the Internet. Thus, producers should publish their profiles and pages on social media and business portals.

  3. Investigation of Electron Density Profile in the ionospheric D and E region by Kagoshima rocket experiment

    Science.gov (United States)

    Ashihara, Y.; Ishisaka, K.; Miyake, T.; Okada, T.; Nagano, I.; Abe, T.; Ono, T.

    2007-12-01

    The radio wave propagation characteristic in the lower ionosphere is important because of its effect on commercial radio communication, navigation, and broadcast services. The electron density is of primary interest in this region because the high ion-neutral collision frequencies result in radio wave absorption. In order to investigate the ionization structure in the ionospheric D and E region by using the propagation characteristics of MF-band and LF-band radio waves, S-310-37 and S-520-23 sounding rocket experiments have been carried out at Uchinoura Space Center (USC). S-310-37 sounding rocket was launched at 11:20 LT on January 16, 2007. The apex of rocket trajectory was about 138 km. Then S-520-23 sounding rocket was launched at 19:20 LT on September 2, 2007. The apex was about 279 km. As a common measurement, these sounding rockets measure the fields intensities and the waveform of radio waves from NHK Kumamoto broadcasting station (873kHz, 500kW) and JJY signals from Haganeyama LF radio station (60kHz, 50kW). The approximate electron density profile can be determined from the comparison between these experimental results and propagation characteristics calculated by the full wave method. We will get the most probable electron density profile in the ionosphere. In presentation, we will show the propagation characteristic of LF/MF radio waves measured by two sounding rocket experiments. Then we will discuss the analysis method and the estimated electron density profile in the ionosphere.

  4. Experiments on electron temperature profile resilience in FTU tokamak with continuous and modulated ECRH

    International Nuclear Information System (INIS)

    Cirant, S.

    2002-01-01

    Experiments performed on FTU tokamak, aiming at validation of physics-based transport models of the electron temperature profile resilience, are presented. ECRH is used to probe transport features, both in steady-state and in response to perturbations, while ECCD and LHCD are used for current density profile shaping. Observed confinement behaviour shows agreement with a critical temperature gradient length modelling. Central, low gradient plasma is characterized by low stiffness and low electron thermal diffusivity. Strong stiffness and high conduction are found in the confinement region. Resilience is experimentally characterized by an index of the resistance of the profile to adapt its shape to localized ECRH, while the diffusivity and its low-high transition are measured both by power balance and heat pulse propagation analysis. A particular attention is given to the investigation of the transition layer between low-high diffusivity and low-high stiffness regions. A dependence of LTc on magnetic shear, similar to what found in Tore Supra, and consistent with ETG based anomalous transport, is found. (author)

  5. Simulation calculation for the energy deposition profile and the transmission fraction of intense pulsed electron beam at various incident angles

    International Nuclear Information System (INIS)

    Yang Hailiang; Qiu Aici; Zhang Jiasheng; Huang Jianjun; Sun Jianfeng

    2002-01-01

    The incident angles have a heavy effect on the intense pulsed electron beam energy deposition profile, energy deposition fraction and beam current transmission fraction in material. The author presents electron beam energy deposition profile and energy deposition fraction versus electron energy (0.5-2.0 MeV), at various incident angles for three aluminum targets of various thickness via theoretical calculation. The intense pulsed electron beam current transmission fractions versus electron energy (0.4-1.4 MeV) at various incident angles for three thickness of carbon targets were also theoretically calculated. The calculation results indicate that the deposition energy in unit mass of material surface layer increase with the rise of electron beam incident angle, and electron beam with low incident angle (closer to normal incident angle) penetrates deeper into the target material. The electron beams deposit more energy in unit mass of material surface layer at 60 degree-70 degree incident angle

  6. Depth profiling: RBS versus energy-dispersive X-ray imaging using scanning transmission electron microscopy

    International Nuclear Information System (INIS)

    Markwitz, Andreas

    2000-01-01

    Rutherford backscattering spectrometry (RBS) is known to be one of the techniques ideal for analysis of thin films. Elemental concentrations of matrix components and impurities can be investigated as well as depth profiles of almost each element of the periodic table. Best of all, RBS has both a high sensitivity and a high depth resolution, and is a non-destructive analysis technique that does not require specific sample preparation. Solid-state samples are mounted without preparation inside a high-vacuum analysis chamber. However, depth-related interpretation of elemental depth profiles requires the material density of the specimen and stopping power values to be taken into consideration. In many cases, these parameters can be estimated with sufficient precision. However, the assumed density can be inaccurate for depth scales in the nanometer range. For example, in the case of Ge nanoclusters in 500 nm thick SiO 2 layers, uncertainty is related to the actual position of a very thin Ge nanocluster band. Energy-dispersive X-ray emission (EDX) spectroscopy, using a high-resolution scanning transmission electron microscope (STEM) can assist in removing this uncertainty. By preparing a thin section of the specimen, EDX can be used to identify the position of the Ge nanocluster band very precisely, by correlating the Ge profile with the depth profiles of silicon and oxygen. However, extraction of the concentration profiles from STEM-EDX spectra is in general not straightforward. Therefore, a combination of the two very different analysis techniques is often the best and only successful way to extract high-resolution concentration profiles

  7. High-Latitude Topside Ionospheric Vertical Electron Density Profile Changes in Response to Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir A.; Truhlik, Vladimir; Wang, Yongli; Bilitza, Dieter; Fung, Shing F.

    2016-01-01

    Large magnetic-storm-induced changes were detected in high-latitude topside vertical electron density profiles Ne(h) in a database of profiles and digital topside ionograms, from the International Satellites for Ionospheric Studies (ISIS) program, that enabled Ne(h) profiles to be obtained in nearly the same region of space before, during, and after a major magnetic storm (Dst -100nT). Storms where Ne(h) profiles were available in the high-latitude Northern Hemisphere had better coverage of solar wind parameters than storms with available Ne(h) profiles in the high-latitude Southern Hemisphere. Large Ne(h) changes were observed during all storms, with enhancements and depletions sometimes near a factor of 10 and 0.1, respectively, but with substantial differences in the responses in the two hemispheres. Large spatial andor temporal Ne(h) changes were often observed during Dst minimum and during the storm recovery phase. The storm-induced Ne(h) changes were the most pronounced and consistent in the Northern Hemisphere in that large enhancements were observed during winter nighttime and large depletions during winter and spring daytime. The limited available cases suggested that these Northern Hemisphere enhancements increased with increases of the time-shifted solar wind velocity v, magnetic field B, and with more negative values of the B components except for the highest common altitude (1100km) of the profiles. There was also some evidence suggesting that the Northern Hemisphere depletions were related to changes in the solar wind parameters. Southern Hemisphere storm-induced enhancements and depletions were typically considerably less with depletions observed during summer nighttime conditions and enhancements during summer daytime and fall nighttime conditions.

  8. Studies of longitudinal profile of electron bunches and impedance measurements at Indus-2 synchrotron radiation source

    Energy Technology Data Exchange (ETDEWEB)

    Garg, Akash Deep, E-mail: akash-deep@rrcat.gov.in [Beam Diagnostics Section (BDS), Indus Operations, Beam Dynamics and Diagnostics Division (IOBDD), Raja Ramanna Centre for Advanced Technology, Indore 452 013, M.P. (India); Homi Bhabha National Institute (HBNI) at Raja Ramanna Centre for Advanced Technology, Indore (India); Yadav, S.; Kumar, Mukesh; Shrivastava, B.B.; Karnewar, A.K.; Ojha, A.; Puntambekar, T.A. [Beam Diagnostics Section (BDS), Indus Operations, Beam Dynamics and Diagnostics Division (IOBDD), Raja Ramanna Centre for Advanced Technology, Indore 452 013, M.P. (India)

    2016-04-01

    Indus-2 is a 3rd generation synchrotron radiation source at the Raja Ramanna Centre for Advanced Technology (RRCAT) in India. We study the longitudinal profile of electrons in Indus-2 by using dual sweep synchroscan streak camera at visible diagnostic beamline. In this paper, the longitudinal profiles of electron bunch are analyzed by filling beam current in a single bunch mode. These studies are carried at injection energy (550 MeV) and at ramped beam energy (2.5 GeV). The effects of the wakefield generated interactions between the circulating electrons and the surrounding vacuum chamber are analyzed in terms of measured effects on longitudinal beam distribution. The impedance of the storage ring is obtained by fitting the solutions of Haissinski equation to the measured bunch lengthening with different impedance models. The impedance of storage ring obtained by a series R+L impedance model indicates a resistance (R) of 1350±125 Ω, an inductance (L) of 180±25 nH and broadband impedance of 2.69 Ω. These results are also compared with the values obtained from measured synchronous phase advancing and scaling laws. These studies are very useful in better understanding and control of the electromagnetic interactions.

  9. Measuring Density Profiles of Electrons and Heavy Particles in a Stable Axially Blown Arc

    Science.gov (United States)

    Carstensen, J.; Stoller, P.; Galletti, B.; Doiron, C. B.; Sokolov, A.

    2017-08-01

    Two-color spatial carrier wave interferometry employing pulsed 532- and 671-nm lasers is used to measure the electron-density and heavy-particle-density profiles in the stagnation point of a stable, axially blown arc in argon for currents of 50 to 200 A and stagnation point pressures of 0.2 to 16 bar. This technique takes advantage of the fact that the free-electron contribution to the refractive index depends strongly on the wavelength, while that of the heavy particles does not. The high spatial resolution achieved allows the hot core of the arc to be readily distinguished from the surrounding boundary layer. A custom-built test device is used to ensure flow conditions that lead to a stable, axisymmetric arc; this permits the reconstruction of the density and temperature profiles using a single projection (interferometric image) of the refractive-index distribution through the arc (at two wavelengths). The arc radius determined from the heavy-particle density decreases with increasing stagnation pressure and increases with the current. These measurements are in good agreement with a simple axially blown arc model taking into account Ohmic heating, radiation losses, and enthalpy flow for core temperatures of approximately 16 500 K. The measured electron density at the center of the arc agrees well with a prediction based on local thermodynamic equilibrium.

  10. Soybean diseases in Poland

    Directory of Open Access Journals (Sweden)

    J. Marcinkowska

    2013-12-01

    Full Text Available Field observations on the occurrence of soybean diseases were undertaken in the southern and central regions of Poland in the period 1976-1980. Most prevalent were foliage diseases caused by Peronospora manshurica, Pseudomonas syrinqae pv. glycinea and soybean mosaic virus (SMV. Sclerotinia sclerotiorum and Ascochyta sojaecola were reported as pathogens of local importance. The following pathogenic fungi: Botrytis cinerea, Fusarium culmorum, F. oxysporum and Rhizoctonia solani were also isolated from soybean.

  11. Proton and electron deep dose profiles for retinoblastoma based on GEANT 4 code

    International Nuclear Information System (INIS)

    Braga, Flavia V.; Campos, Tarcisio P.R. de; Ribeiro, Kilder L.

    2009-01-01

    Herein, the dosimetry responses to a retinoblastoma proton and electron radiation therapy were investigated. The computational tool applied to this simulation was the Geant4 code, version 4.9.1. The code allows simulating the charge particle interaction with eyeball tissue. In the present simulation, a box of 4 cm side water filled had represented the human eye. The simulation was performed considering mono energetic beams of protons and electrons with spectra of 57 to 70 MeV for protons and 2 to 8 MeV for electrons. The simulation was guide by the advanced hadron therapy example distributed with the Geant4 code. The phantom was divided in voxels with 0.2 mm side. The energy deposited in each voxel was evaluated taken the direct beam at one face. The simulation results show the delivery energy and therefore the dose deposited in each voxel. The deep dose profiles to proton and electron were plotted. The well known Bragg peak was reproduced for protons. The maximum delivered dose defined the position at the proton stopped. However, to electrons, the absorbed energies were delivered along its path producing a more continuous distribution following the water depth, but also being stopped in the end of its path. (author)

  12. Proton and electron deep dose profiles for retinoblastoma based on GEANT 4 code

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Flavia V., E-mail: flaviafisica@gmail.co [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pos-graduacao em Ciencias e Tecnicas Nucleares; Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Campos, Tarcisio P.R. de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pos-graduacao em Ciencias e Tecnicas Nucleares; Ribeiro, Kilder L., E-mail: kilderlr@gmail.co [Universidade Estadual de Feira de Santana (UEFS), BA (Brazil). Dept. de Fisica

    2009-07-01

    Herein, the dosimetry responses to a retinoblastoma proton and electron radiation therapy were investigated. The computational tool applied to this simulation was the Geant4 code, version 4.9.1. The code allows simulating the charge particle interaction with eyeball tissue. In the present simulation, a box of 4 cm side water filled had represented the human eye. The simulation was performed considering mono energetic beams of protons and electrons with spectra of 57 to 70 MeV for protons and 2 to 8 MeV for electrons. The simulation was guide by the advanced hadron therapy example distributed with the Geant4 code. The phantom was divided in voxels with 0.2 mm side. The energy deposited in each voxel was evaluated taken the direct beam at one face. The simulation results show the delivery energy and therefore the dose deposited in each voxel. The deep dose profiles to proton and electron were plotted. The well known Bragg peak was reproduced for protons. The maximum delivered dose defined the position at the proton stopped. However, to electrons, the absorbed energies were delivered along its path producing a more continuous distribution following the water depth, but also being stopped in the end of its path. (author)

  13. [Migrant vaccinations in Poland].

    Science.gov (United States)

    Sakowski, Piotr

    2012-01-01

    After the European Union accession in 2004, Poland has been perceived by foreigners as an attractive destination of their migration, and also as a popular transit country for people going further to the Western Europe countries. The Nofer Institute of Occupational Medicine is involved in the implementation of the international project PROMOVAX (Promote Vaccinations among Migrant Populations in Europe). The objective of the project is to promote immunizations among migrant populations in Europe. This article presents the up-to-date legal regulations that are effective in Poland, taking into account their relevance to the issue of vaccinations in migrant population. The analysis of the Polish legislation concerning this problem shows that there are no specific regulations addressed to migrant population staying in our country. This issue seems to be popular in the European Union, where immunization of migrants is given high priority. From the point of view of health care professionals it is important to be aware of the fact that EU open borders favor the increased flow of people between countries. The scale of migration from outside the EU to its member states also contributes to the increase in potential contacts between health care workers and migrants working in Poland.

  14. Measurement of current drive profile using electron cyclotron wave attenuation near the O-mode cutoff

    International Nuclear Information System (INIS)

    Fidone, I.; Meyer, R.L.; Caron, X.

    1992-01-01

    A method for determining the radial profile of the lower-hybrid current drive in tokamaks using electron cyclotron attenuation of the O mode for frequencies ω near the cutoff frequency is discussed. The basic idea is that, for a given wave frequency, the cutoff plays the role of a spatial filter selecting a variable portion of the noninductive current. It is shown that the incremental attenuation resulting from a small increase of ω displays specific features related to the current density near the cutoff point. Using the relation between the wave damping and the current density, it is possible to determine the radial profile of the current drive from the wave attenuation measurements. A numerical application is also presented for plasma parameters in the reactor regime

  15. SU-E-T-149: Electron Beam Profile Differences Between Elekta MLCi2 and Elekta Agility Treatment Heads

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C [Sutter Medical Foundation, Roseville, CA 95661 (United States); Hatcher, C [Sutter Shared Services S3, Sacramento, CA (United States)

    2014-06-01

    Purpose: To report and investigate observed differences in electron beam profiles at various energies/applicators between Elekta MLCi2 and Agility treatment head on Elekta Infinity LINAC Methods: When we upgraded from MLCi2 to Agility on one of our Elekta Infinity LINAC's, electron beam PDDs and profiles were acquired for comparison purpose. All clinical electron energies (6/9/12/15/12/18 MeV) and electron applicators (6/10/14/20/25 square) were included in measurement. PDDs were acquired at 100 SSD in water (PTW MP3 water tank) with a plane-parallel ion chamber (PTW Roos). X and Y Profiles were acquired using IC Profiler (Sun Nuclear Corp.) at 1cm and maximum PDD depths (water equivalent). Results: All PDD curves match very well between MLCi2 and Agility treatment head. However, some significant differences on electron profiles were found. On Agility, even after increasing the default auto-tracking offset values for backup diaphragms in Y and MLC in X by 2.8 cm (the maximum allowed change is 3.0 cm), electron profiles still have rounder shoulders comparing to corresponding MLCi2 profiles. This difference is significantly more pronounced at larger applicators (20 and 25 square), for all electron energies. Conclusion: The significant design change between MLCi2 and Agility beam limiting device seems to affect exit electron beam profiles. In IEC1217 X direction, the main change on Agility is the removal of the original MLCi2 X backup diaphragms and replacing it with MLC leaves; In Y direction, the main change is the radius and materials on Y backup diaphragms.

  16. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.Y., E-mail: wangyy@us.ibm.com [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Li, J.; Domenicucci, A. [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Bruley, J. [IBM TJ Watson Research Center, 1101 Kitchawan Road, Route 134 Yorktown Heights, NY 10598 (United States)

    2013-01-15

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction are acquired. In this paper, a fringe quality number, N Prime , which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N Prime number is provided. -- Highlights: Black-Right-Pointing-Pointer Dual lens electron holography is implemented on FEI instruments (Titan and F20). Black-Right-Pointing-Pointer Wide range of field of view (0.1-0.9 {mu}m) and fringe spacing (0.5-6 nm) is achieved. Black-Right-Pointing-Pointer Fringe quality number is proposed to quantify the quality of an electron hologram. Black-Right-Pointing-Pointer Junction map at high spatial resolution is provided. Black-Right-Pointing-Pointer Strain maps along Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket direction of Si by dark field electron holography are reported.

  17. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

    International Nuclear Information System (INIS)

    Wang, Y.Y.; Li, J.; Domenicucci, A.; Bruley, J.

    2013-01-01

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63–72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si 〈0 0 4〉 diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on 〈2 2 0〉 and 〈0 0 4〉 diffraction are acquired. In this paper, a fringe quality number, N′, which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N′ number is provided. -- Highlights: ► Dual lens electron holography is implemented on FEI instruments (Titan and F20). ► Wide range of field of view (0.1–0.9 μm) and fringe spacing (0.5–6 nm) is achieved. ► Fringe quality number is proposed to quantify the quality of an electron hologram. ► Junction map at high spatial resolution is provided. ► Strain maps along 〈2 2 0〉 and 〈0 0 4〉 direction of Si by dark field electron holography are reported.

  18. Measurements of electron density and temperature profiles in a gas blanket experiment

    International Nuclear Information System (INIS)

    Kuthy, A.

    1979-02-01

    Radial profiles of electron density, temperature and H sub(β) intensity are presented for the rotating plasma device F-1. The hydrogen filling pressure, the average magnetic field strength at the midplane, and the power input to the discharge have been varied in the ranges 10-100 mTorr, 0.25-0.5 Tesla, and 0.1 to 1.5 MW, respectively. These experiments have been performed with the main purpose of studying the gas blanket (cold-mantle) state of the plasma. It is shown, that a simple spectroscopic method can be used to derive the radial distribution of the electron temperature in such plasmas. The observed peak temperatures and densities are in agreement with earlier theoretical estimates. (author)

  19. Reciprocal space mapping by spot profile analyzing low energy electron diffraction

    International Nuclear Information System (INIS)

    Meyer zu Heringdorf, Frank-J.; Horn-von Hoegen, Michael

    2005-01-01

    We present an experimental approach for the recording of two-dimensional reciprocal space maps using spot profile analyzing low energy electron diffraction (SPA-LEED). A specialized alignment procedure eliminates the shifting of LEED patterns on the screen which is commonly observed upon variation of the electron energy. After the alignment, a set of one-dimensional sections through the diffraction pattern is recorded at different energies. A freely available software tool is used to assemble the sections into a reciprocal space map. The necessary modifications of the Burr-Brown computer interface of the two Leybold and Omicron type SPA-LEED instruments are discussed and step-by-step instructions are given to adapt the SPA 4.1d software to the changed hardware. Au induced faceting of 4 deg. vicinal Si(001) is used as an example to demonstrate the technique

  20. Measurement of surface temperature profiles on liquid uranium metal during electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Ohba, Hironori; Shibata, Takemasa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-11-01

    Surface temperature distributions of liquid uranium in a water-cooled copper crucible during electron beam evaporation were measured. Evaporation surface was imaged by a lens through a band-path filter (650{+-}5 nm) and a double mirror system on a charge coupled device (CCD) camera. The video signals of the recorded image were connected to an image processor and converted to two-dimensional spectral radiance profiles. The surface temperatures were obtained from the spectral radiation intensity ratio of the evaporation surface and a freezing point of uranium and/or a reference light source using Planck`s law of radiation. The maximum temperature exceeded 3000 K and had saturation tendency with increasing electron beam input. The measured surface temperatures agreed with those estimated from deposition rates and data of saturated vapor pressure of uranium. (author)

  1. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    International Nuclear Information System (INIS)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.

    2017-01-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μm. In conclusion, our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  2. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    Science.gov (United States)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.; Gilevich, S.; Huang, Z.; Miahnahri, A.; Ratner, D.; Robinson, J.; Zhou, F.

    2017-08-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μ m . Our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  3. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping.

    Science.gov (United States)

    Wang, Y Y; Li, J; Domenicucci, A; Bruley, J

    2013-01-01

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on and diffraction are acquired. In this paper, a fringe quality number, N', which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N' number is provided. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Finding evidence for density fluctuation effects on electron cyclotron heating deposition profiles on DIII-D

    International Nuclear Information System (INIS)

    Brookman, M. W.; Austin, M. E.; Petty, C. C.

    2015-01-01

    Theoretical work, computation, and results from TCV [J. Decker “Effect of density fluctuations on ECCD in ITER and TCV,” EPJ Web of Conf. 32, 01016 (2012)] suggest that density fluctuations in the edge region of a tokamak plasma can cause broadening of the ECH deposition profile. In this paper, a GUI tool is presented which is used for analysis of ECH deposition as a first step towards looking for this broadening, which could explain effects seen in previous DIII-D ECH transport studies [K.W. Gentle “Electron energy transport inferences from modulated electron cyclotron heating in DIII-D,” Phys. Plasmas 13, 012311 (2006)]. By applying an FFT to the T e measurements from the University of Texas’s 40-channel ECE Radiometer, and using a simplified thermal transport equation, the flux surface extent of ECH deposition is determined. The Fourier method analysis is compared with a Break-In-Slope (BIS) analysis and predictions from the ray-tracing code TORAY. Examination of multiple Fourier harmonics and BIS fitting methods allow an estimation of modulated transport coefficients and thereby the true ECH deposition profile. Correlations between edge fluctuations and ECH deposition in legacy data are also explored as a step towards establishing a link between fluctuations and deposition broadening in DIII-D

  5. Dynamic wedge, electron energy and beam profile Q.A. using an ionization chamber linear array

    International Nuclear Information System (INIS)

    Kenny, M.B.; Todd, S.P.

    1996-01-01

    Since the introduction of multi-modal linacs the quality assurance workload of a Physical Sciences department has increased dramatically. The advent of dynamic wedges has further complicated matters because of the need to invent accurate methods to perform Q.A. in a reasonable time. We have been using an ionization chamber linear array, the Thebes 7000 TM by Victoreen, Inc., for some years to measure X-ray and electron beam profiles. Two years ago we developed software to perform Q.A. on our dynamic wedges using the array and more recently included a routine to check electron beam energies using the method described by Rosenow, U.F. et al., Med. Phys. 18(1) 19-25. The integrated beam and profile management system has enabled us to maintain a comprehensive quality assurance programme on all our linaccs. Both our efficiency and accuracy have increased to the point where we are able to keep up with the greater number of tests required without an increase in staff or hours spent in quality assurance. In changing the processor from the Z80 of the Thebes console to the 486 of the PC we have also noticed a marked increase in the calibration stability of the array. (author)

  6. Validation of honey-bee smelling profile by using a commercial electronic nose

    Directory of Open Access Journals (Sweden)

    Ana R. Correa

    2017-09-01

    Full Text Available Honey is a natural sweetener and its quality labels are associated to its botanical or geographical origin, which is being established by palynological and sensorial analysis. The use of fast and non-invasive techniques such as an electronic nose can become an alternative for honey classification. In this study, the operational parameters of a commercial electronic nose were validated to determine the honey odor profile. A central composite design with five factors, three levels and 28 assays was used, varying sample amounts (1, 2 and 3 g, incubation temperature (30, 40 and 50 °C, incubation time 30 min, gas flow (50, 150 and 250 mL/min and injection time (100, 200 and 300 s. The commercial nose had ten sensors. Repeatability was evaluated with a coefficient of variation of 10 %. The response surface methodology was used and the optimal operating conditions were: 3 g of sample, incubation at 50 °C for 17 min, gas flow of 100 mL/min and sampling time of 150 s. Finally, these parameters were used to analyze 19 samples of honey, which were classified according to their odor profiles, showing that it can be a useful tool to classify honey.

  7. Finding evidence for density fluctuation effects on electron cyclotron heating deposition profiles on DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Brookman, M. W., E-mail: brookmanmw@fusion.gat.com; Austin, M. E. [Institute for Fusion Studies, University of Texas at Austin, MS 13-505, 3483 Dunhill St, San Diego, CA 92121-1200 (United States); Petty, C. C. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States)

    2015-12-10

    Theoretical work, computation, and results from TCV [J. Decker “Effect of density fluctuations on ECCD in ITER and TCV,” EPJ Web of Conf. 32, 01016 (2012)] suggest that density fluctuations in the edge region of a tokamak plasma can cause broadening of the ECH deposition profile. In this paper, a GUI tool is presented which is used for analysis of ECH deposition as a first step towards looking for this broadening, which could explain effects seen in previous DIII-D ECH transport studies [K.W. Gentle “Electron energy transport inferences from modulated electron cyclotron heating in DIII-D,” Phys. Plasmas 13, 012311 (2006)]. By applying an FFT to the T{sub e} measurements from the University of Texas’s 40-channel ECE Radiometer, and using a simplified thermal transport equation, the flux surface extent of ECH deposition is determined. The Fourier method analysis is compared with a Break-In-Slope (BIS) analysis and predictions from the ray-tracing code TORAY. Examination of multiple Fourier harmonics and BIS fitting methods allow an estimation of modulated transport coefficients and thereby the true ECH deposition profile. Correlations between edge fluctuations and ECH deposition in legacy data are also explored as a step towards establishing a link between fluctuations and deposition broadening in DIII-D.

  8. Dependence of L-mode confinement on the electron cyclotron power deposition profile in the TCV tokamak

    Science.gov (United States)

    Kirneva, N. A.; Razumova, K. A.; Pochelon, A.; Behn, R.; Coda, S.; Curchod, L.; Duval, B. P.; Goodman, T. P.; Labit, B.; Karpushov, A. N.; Rancic, M.; Sauter, O.; Silva, M.; TCV Team

    2012-01-01

    Scenarios with different electron cyclotron heating power profile distributions and widths were compared for the first time in experiments on the Tokamak à Configuration Variable (TCV). The heating profile was changed from shot to shot over a wide range from localized on-axis, with normalized minor radius half-width at half maximum σ1/2 ~ 0.1, up to a widely distributed heating power profile with σ1/2 ~ 0.4 and finally to a profile peaked far off-axis. The global confinement, MHD activity, density, temperature and electron pressure profile evolution were compared. In particular, the energy confinement properties of discharges with localized on-axis heating and distributed on-axis heating were very similar, with degradation close to that predicted by the ITER L-mode scaling; in the case of off-axis heating, on the other hand, the confinement degradation was even stronger.

  9. Drug Policy in Poland.

    Science.gov (United States)

    Jahnz-Różyk, Karina; Kawalec, Pawel; Malinowski, Krzysztof; Czok, Katarzyna

    2017-09-01

    We presented a general overview of the health care system as well as the pricing and reimbursement environment in Poland. Poland aims to ensure proper access to safe and effective medicines while reducing patients' share in treatment costs. Nevertheless, the co-payment for pharmacotherapy is still high (more than 60%). The key policymaker and regulator in the system is the Ministry of Health, which is supported by the Polish Agency for Health Technology Assessment and Tariff System (Agencja Oceny Technologii Medycznych i Taryfikacji), responsible for evaluating applicant drugs, and the Economic Commission, responsible for negotiating the official sales prices and conditions for reimbursement with pharmaceutical companies (e.g., level of reimbursement and risk-sharing scheme agreements). The Agency for Health Technology Assessment and Tariff System dossier is obligatory for reimbursement application and includes the analysis of clinical effectiveness, economic analysis (with the threshold of quality-adjusted life-year established as no more than 3 times the gross domestic product per capita), and the analysis of budget impact. In Poland, only a positive list of reimbursed drugs is published and it is updated every 2 months. The following levels of reimbursement are in use: 100%, 70%, 50%, and lump sum (about €0.8). The first reimbursement decision is given for a period of 2 years only, the second for 3 years, and the third for 5 years. There is no separate budget or special legal regulations for orphan drugs. Generic substitution of drugs is desired but not mandatory. Physicians are not assigned with pharmaceutical budgets. The access to real-world data is limited; the only registers available are for drugs used in drug programs. Copyright © 2017. Published by Elsevier Inc.

  10. Clean air for Poland

    International Nuclear Information System (INIS)

    2003-01-01

    Coal power generation produces gases which pollute the environment and cause damage to vegetation and human health. Where alternative sources of energy are not economically viable, the only solution is to ensure that gas emissions are reduced to a minimum. The Department of Technical Co-operation is sponsoring a programme with the support of the Department of Research and Isotopes to demonstrate a technology which will show Poland, and possibly other countries, a way to attain European emission standards without the need to compromise industrial growth. (IAEA)

  11. Precision and resolution on Tore-Supra ECE electron temperature profile measurements

    International Nuclear Information System (INIS)

    Segui, J.L.; Molina, D.; Goniche, M.

    2003-01-01

    A 16-channel heterodyne radiometer, 2 GHz spaced, is used on Tore-Supra to measure the electron cyclotron emission in the frequency range 78-110 GHz for the O mode and 94 -126 GHz for the X mode. In the equatorial plane, a dual polarisation Gaussian optics lens antenna, with a perpendicular line of sight (with respect to the magnetic field), gives ECE measurements with very low refraction and Doppler effects. A separate O/X mode RF front-end allows the use of an IF electronic mode selector. This improves time stability calibration and gives the potentiality of simultaneous O/X mode measurements in the 94 -110 GHz RF band for polarisation studies. RF and IF filters reject the gyrotron frequency (118 GHz) in order to perform temperature measurements during ECRH plasmas. A precise absolute spectral calibration is performed outside the vacuum vessel by using a 600 deg. C black body, a digital signal averaging on the waveform generated by a mechanical chopper placed directly in front of it, and a simulation window without Fabry-Perot effects. The calibration precision leads to ECE temperature profiles which are very consistent with Thomson scattering measurements and guarantees a good stability of the ECE profiles for small changes on the magnetic field (absolute precision ± 6%, relative precision between channels ± 3%). Post-pulse data processing takes routinely into account the total magnetic field (B vacuum with ripple, B para , B dia , B pol , all with analytical formulations), the radial relativistic shift (analytical formulation is used), the refraction, not described in this paper, (cut-off detection with safety margin to avoid strong refraction), the nonthermal ECE spectra, not described in this paper, during LHCD (using an electron density threshold criterion). These previous analytical formulations are compatible with real time processing. Relativistic radial broadening simulations show that it is useful to fulfill 32 channels (1 GHz spaced). (authors)

  12. Precision and resolution on Tore-Supra ECE electron temperature profile measurements

    Energy Technology Data Exchange (ETDEWEB)

    Segui, J.L.; Molina, D.; Goniche, M. [Association EURATOM -CEA, CEA/DSM/DRFC CEA-Cadarache, 13108 St Paul-lez-Durance (France)

    2003-07-01

    A 16-channel heterodyne radiometer, 2 GHz spaced, is used on Tore-Supra to measure the electron cyclotron emission in the frequency range 78-110 GHz for the O mode and 94 -126 GHz for the X mode. In the equatorial plane, a dual polarisation Gaussian optics lens antenna, with a perpendicular line of sight (with respect to the magnetic field), gives ECE measurements with very low refraction and Doppler effects. A separate O/X mode RF front-end allows the use of an IF electronic mode selector. This improves time stability calibration and gives the potentiality of simultaneous O/X mode measurements in the 94 -110 GHz RF band for polarisation studies. RF and IF filters reject the gyrotron frequency (118 GHz) in order to perform temperature measurements during ECRH plasmas. A precise absolute spectral calibration is performed outside the vacuum vessel by using a 600 deg. C black body, a digital signal averaging on the waveform generated by a mechanical chopper placed directly in front of it, and a simulation window without Fabry-Perot effects. The calibration precision leads to ECE temperature profiles which are very consistent with Thomson scattering measurements and guarantees a good stability of the ECE profiles for small changes on the magnetic field (absolute precision {+-} 6%, relative precision between channels {+-} 3%). Post-pulse data processing takes routinely into account the total magnetic field (B{sub vacuum} with ripple, B{sub para}, B{sub dia}, B{sub pol}, all with analytical formulations), the radial relativistic shift (analytical formulation is used), the refraction, not described in this paper, (cut-off detection with safety margin to avoid strong refraction), the nonthermal ECE spectra, not described in this paper, during LHCD (using an electron density threshold criterion). These previous analytical formulations are compatible with real time processing. Relativistic radial broadening simulations show that it is useful to fulfill 32 channels (1 GHz

  13. Profiles

    International Nuclear Information System (INIS)

    2004-01-01

    Profiles is a synthetic overview of more than 100 national energy markets in the world, providing insightful facts and key energy statistics. A Profile is structured around 6 main items and completed by key statistics: Ministries, public agencies, energy policy are concerned; main companies in the oil, gas, electricity and coal sectors, status, shareholders; reserve, production, imports and exports, electricity and refining capacities; deregulation of prices, subsidies, taxes; consumption trends by sector, energy market shares; main energy projects, production and consumption prospects. Statistical Profiles are present in about 3 pages the main data and indicators on oil, gas, coal and electricity. (A.L.B.)

  14. Retrieval of Electron Density Profile for KOMPSAT-5 GPS Radio Occultation

    Directory of Open Access Journals (Sweden)

    Woo-Kyoung Lee

    2007-12-01

    Full Text Available The AOPOD (Atmosphere Occultation and Precision Orbit Determination system, the secondary payload of KOMPSAT (KOrea Multi-Purpose SATellite-5 scheduled to be launched in 2010, shall provide GPS radio occultation data. In this paper, we simulated the GPS radio occultation characteristic of KOMPSAT-5 and retrieved electron density profiles using KROPS (KASI Radio Occultation Processing Software. The electron density retrieved from CHAMP (CHAllenging Minisatellite Payload GPS radio occultation data on June 20, 2004 was compared with IRI (International Reference Ionosphere - 2001, PLP (Planar Langmuir Probe, and ionosonde measurements. When the result was compared with ionosonde measurements, the discrepancies were 5 km on the F_2 peak height (hmF_2 and 3×10^{10} el/m^3 on the electron density of the F_2 peak height (NmF_2. By comparing with the Langmuir Probe measurements of CHAMP satellite (PLP, both agrees with 1.6×10^{11} el/m^3 at the height of 365.6 km.

  15. Longitudinal profile diagnostic scheme with subfemtosecond resolution for high-brightness electron beams

    Directory of Open Access Journals (Sweden)

    G. Andonian

    2011-07-01

    Full Text Available High-resolution measurement of the longitudinal profile of a relativistic electron beam is of utmost importance for linac based free-electron lasers and other advanced accelerator facilities that employ ultrashort bunches. In this paper, we investigate a novel scheme to measure ultrashort bunches (subpicosecond with exceptional temporal resolution (hundreds of attoseconds and dynamic range. The scheme employs two orthogonally oriented deflecting sections. The first imparts a short-wavelength (fast temporal resolution horizontal angular modulation on the beam, while the second imparts a long-wavelength (slow angular kick in the vertical dimension. Both modulations are observable on a standard downstream screen in the form of a streaked sinusoidal beam structure. We demonstrate, using scaled variables in a quasi-1D approximation, an expression for the temporal resolution of the scheme and apply it to a proof-of-concept experiment at the UCLA Neptune high-brightness injector facility. The scheme is also investigated for application at the SLAC NLCTA facility, where we show that the subfemtosecond resolution is sufficient to resolve the temporal structure of the beam used in the echo-enabled free-electron laser. We employ beam simulations to verify the effect for typical Neptune and NLCTA parameter sets and demonstrate the feasibility of the concept.

  16. Electron beam and optical depth profiling of quasibulk GaN

    International Nuclear Information System (INIS)

    Chernyak, L.; Osinsky, A.; Nootz, G.; Schulte, A.; Jasinski, J.; Benamara, M.; Liliental-Weber, Z.; Look, D. C.; Molnar, R. J.

    2000-01-01

    Electron beam and optical depth profiling of thick (5.5--64 μm) quasibulk n-type GaN samples, grown by hydride vapor-phase epitaxy, were carried out using electron beam induced current (EBIC), microphotoluminescence (PL), and transmission electron microscopy (TEM). The minority carrier diffusion length, L, was found to increase linearly from 0.25 μm, at a distance of about 5 μm from the GaN/sapphire interface, to 0.63 μm at the GaN surface, for a 36-μm-thick sample. The increase in L was accompanied by a corresponding increase in PL band-to-band radiative transition intensity as a function of distance from the GaN/sapphire interface. We attribute the latter changes in PL intensity and minority carrier diffusion length to a reduced carrier mobility and lifetime at the interface, due to scattering at threading dislocations. The results of EBIC and PL measurements are in good agreement with the values for dislocation density obtained using TEM

  17. Poland and Global Threats

    Science.gov (United States)

    Kleer, Jerzy

    2016-01-01

    This essay seeks to present the specifics of global threats, as well as the reasons for them being universal in nature, and for their persistence. A certain classification of the threats is also engaged in. At the same time, an attempt is made to show the specific threats present - irrespective of their global counterparts - in different regions, and even in different states. The genesis and nature of the latter are demonstrated in a somewhat ad hoc manner by reference to the threats considered to face Poland. If the global threats are truly universal, and arise out of the changes taking place around the world in the last half-century (primarily around the twin phenomena of globalisation and the information revolution), a specific reverse kind of situation applies to decolonisation, plus the collapse of the communist system and the transformation into market economies that apply to formerly communist countries. Equally, some at least of the threats facing Poland may have even a longer history, given that they are very much influenced by past economic and political development, as well as the dominant cultural system.

  18. A new method to characterize dopant profiles in NMOSFETs using conventional transmission electron microscopy

    International Nuclear Information System (INIS)

    Kawamura, Kazuo; Ikeda, Kazuto; Terauchi, Masami

    2004-01-01

    We have developed a new method using conventional transmission electron microscopy (TEM) to obtain two dimensional dopant profiles in silicon and applied it to 40 nm-gate-length N + /p metal oxide semiconductor field effect transistors (MOSFETs). The results are consistent with those of selective-chemically etched samples observed by TEM. This method, using focused ion beam (FIB) sample preparation and conventional TEM, has the great advantage of simple sample preparation and high spatial resolution compared to other characterization methods, such as atomic capacitance microscopy, spreading resistance microscopy, and TEM combined with selective chemical etching. This indicates that this method can be applicable to the analysis of FETs at the 65 nm or smaller node

  19. Commissioning and First Results of the Electron Beam Profiler in the Main Injector at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Thurman-Keup, R. [Fermilab; Alvarez, M. [Fermilab; Fitzgerald, J. [Fermilab; Lundberg, C. [Fermilab; Prieto, P. [Fermilab; Zagel, J. [Fermilab; Blokland, W. [Oak Ridge

    2017-08-01

    The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and a similar device has been installed in the Main Injector at Fermilab. Commissioning of the device is in progress with the goal of having it operational by the end of the year. The status of the commissioning and initial results will be presented

  20. MGS Radio Science Electron Density Profiles: Interannual Variability and Implications for the Martian Neutral Atmosphere

    Science.gov (United States)

    Bougher, S. W.; Engel, S.; Hinson, D. P.; Murphy, J. R.

    2004-01-01

    Martian electron density profiles provided by the Mars Global Surveyor (MGS) Radio Science (RS) experiment over the 95-200 km altitude range indicate what the height of the electron peak and the longitudinal structure of the peak height are sensitive indicators of the physical state of the Mars lower and upper atmospheres. The present analysis is carried out on five sets of occultation profiles, all at high solar zenith angles (SZA). Variations spanning 2 Martian years are investigated near aphelion conditions at high northern latitudes (64.7 - 77.6 N) making use of four of these data sets. A mean ionospheric peak height of 133.5 - 135 km is obtained near SZA = 78 - 82 deg.; a corresponding mean peak density of 7.3 - 8.5 x l0(exp 4)/ qu cm is also measured during solar moderate conditions at Mars. Strong wave number 2 - 3 oscillations in peak heights are consistently observed as a function of longitude over the 2 Martian years. These observed ionospheric features are remarkably similar during aphelion conditions 1 Martian year apart. This year-to-year repeatability in the thermosphere-ionosphere structure is consistent with that observed in multiyear aphelion temperature data of the Mars lower atmosphere. Coupled Mars general circulation model (MGCM) and Mars thermospheric general circulation model (MTGCM) codes are run for Mars aphelion conditions, yielding mean and longitude variable ionospheric peak heights that reasonably match RS observations. A tidal decomposition of MTGCM thermospheric densities shows that observed ionospheric wave number 3 features are linked to a non-migrating tidal mode with semidiurnal period (sigma = 2) and zonal wave number 1 (s = -1) characteristics. The height of this photochemically determined ionospheric peak should be monitored regularly.

  1. Analysis of effects of laser profiles on fast electron generation by two-dimensional Particle-In-Cell simulations

    International Nuclear Information System (INIS)

    Hata, M.

    2010-01-01

    Complete text of publication follows. A cone-guided target is used in the Fast Ignition Realization Experiment project phase-I (FIREX-I) and optimization of its design is performed. However a laser profile is not optimized much, because the laser profile that is the best for core heating is not known well. To find that, it is useful to investigate characteristics of generated fast electrons in each condition of different laser profiles. In this research, effects of laser profiles on fast electron generation are investigated on somewhat simple conditions by two-dimensional Particle-In-Cell simulations. In these simulations, a target is made up of Au pre-plasma and Au plasma. The Au pre-plasma has the exponential profile in the x direction with the scale length L = 4.0 μm and the density from 0.10 n cr to 20 n cr . The Au plasma has the flat profile in the x direction with 10 μm width and 20 n cr . Plasma profiles are uniform in the y direction. The ionization degree and the mass number of plasmas are 40 and 197, where the ionization degree is determined by PINOCO simulations. PINOCO is a two-dimensional radiation hydrodynamics simulation code, which simulates formation of the high-density plasma during the compression phase in the fast ignition. A laser is assumed to propagate as plane wave from the negative x direction to the positive x direction. Laser profiles are supposed to be uniform in the y direction. Three different laser profiles, namely flat one with t flat = 100 fs, Gaussian one with t rise/fall = 47.0 fs and flat + Gaussian one with t rise/fall = 23.5 fs and t flat = 50 fs are used. The energy and the peak intensity are constant with E = 10 7 J/cm 2 and I L = 10 20 W/cm 2 in all cases of different laser profiles. We compare results in each condition of three different laser profiles and investigate effects of laser profiles on fast electron generation. Time-integrated energy spectra are similar in all cases of three different laser profiles. In the

  2. On environmental problems in Poland

    International Nuclear Information System (INIS)

    Hinkel, H.; Kenez, C.J.

    1987-01-01

    The book contains articles by five authors on the following subjects: General literature in German and Polish language on environmental problems in Poland; legal issues of environmental protection - laws for the protection and development of the environment; environmental health hazards - hazards at work; protection of the sea environment in the region of the Baltic Sea - pollution of the Baltic Sea; the water situation in Poland - the large-scale project 'Weichsel 2000'; the ecological situation of the lakes of Masovia; air pollution and its effects - the dying of Silesian forests; Chernobyl and the Polish reaction; the 27 ecologically endangered areas in Poland. (HSCH) [de

  3. An analytical approach to characterize morbidity profile dissimilarity between distinct cohorts using electronic medical records.

    Science.gov (United States)

    Schildcrout, Jonathan S; Basford, Melissa A; Pulley, Jill M; Masys, Daniel R; Roden, Dan M; Wang, Deede; Chute, Christopher G; Kullo, Iftikhar J; Carrell, David; Peissig, Peggy; Kho, Abel; Denny, Joshua C

    2010-12-01

    We describe a two-stage analytical approach for characterizing morbidity profile dissimilarity among patient cohorts using electronic medical records. We capture morbidities using the International Statistical Classification of Diseases and Related Health Problems (ICD-9) codes. In the first stage of the approach separate logistic regression analyses for ICD-9 sections (e.g., "hypertensive disease" or "appendicitis") are conducted, and the odds ratios that describe adjusted differences in prevalence between two cohorts are displayed graphically. In the second stage, the results from ICD-9 section analyses are combined into a general morbidity dissimilarity index (MDI). For illustration, we examine nine cohorts of patients representing six phenotypes (or controls) derived from five institutions, each a participant in the electronic MEdical REcords and GEnomics (eMERGE) network. The phenotypes studied include type II diabetes and type II diabetes controls, peripheral arterial disease and peripheral arterial disease controls, normal cardiac conduction as measured by electrocardiography, and senile cataracts. Copyright © 2010 Elsevier Inc. All rights reserved.

  4. High resolution beam profiling of X-ray free electron laser radiation by polymer imprint development.

    Science.gov (United States)

    Rösner, Benedikt; Döring, Florian; Ribič, Primož R; Gauthier, David; Principi, Emiliano; Masciovecchio, Claudio; Zangrando, Marco; Vila-Comamala, Joan; De Ninno, Giovanni; David, Christian

    2017-11-27

    High resolution metrology of beam profiles is presently a major challenge at X-ray free electron lasers. We demonstrate a characterization method based on beam imprints in poly (methyl methacrylate). By immersing the imprints formed at 47.8 eV into organic solvents, the regions exposed to the beam are removed similar to resist development in grayscale lithography. This allows for extending the sensitivity of the method by more than an order of magnitude compared to the established analysis of imprints created solely by ablation. Applying the Beer-Lambert law for absorption, the intensity distribution in a micron-sized focus can be reconstructed from one single shot with a high dynamic range, exceeding 10 3 . The procedure described here allows for beam characterization at free electron lasers revealing even faint beam tails, which are not accessible when using ablation imprint methods. We demonstrate the greatly extended dynamic range on developed imprints taken in focus of conventional Fresnel zone plates and spiral zone plates producing beams with a topological charge.

  5. Recent measurements of electron density profiles of plasmas in PLADIS I, a plasma disruption simulator

    International Nuclear Information System (INIS)

    Bradley, J. III; Sharp, G.; Gahl, J.M. Kuznetsov, V.; Rockett, P.; Hunter, J.

    1995-01-01

    Tokamak disruption simulation experiments are being conducted at the University of New Mexico (UNM) using the PLADIS I plasma gun system. PLADIS I is a high power, high energy coaxial plasma gun configured to produce an intense plasma beam. First wall candidate materials are placed in the beam path to determine their response under disruption relevant energy densities. An optically thick vapor shield plasma has been observed to form above the target surface in PLADIS I. Various diagnostics have been used to determine the characteristics of the incident plasma and the vapor shielding plasma. The cross sectional area of the incident plasma beam is a critical characteristic, as it is used in the calculation of the incident plasma energy density. Recently, a HeNe interferometer in the Mach-Zehnder configuration has been constructed and used to probe the electron density of the incident plasma beam and vapor shield plasma. The object beam of the interferometer is scanned across the plasma beam on successive shots, yielding line integrals of beam density on different chords through the plasma. Data from the interferometer is used to determine the electron density profile of the incident plasma beam as a function of beam radius. This data is then used to calculate the effective beam area. Estimates. of beam area, obtained from other diagnostics such as damage targets, calorimeter arrays and off-axis measurements of surface pressure, will be compared with data from the interferometer to obtain a better estimate of the beam cross sectional area

  6. Q-profile evolution and improved core electron confinement in the full current drive operation on Tore Supra

    International Nuclear Information System (INIS)

    Litaudon, X.; Peysson, Y.; Aniel, T.; Huysmans, G.; Imbeaux, F.; Joffrin, E.; Lasalle, J.; Lotte, Ph.; Schunke, B.; Segui, J.; Tresset, G.; Zabiego, M.

    2000-12-01

    The formation of a core region with improved electron confinement is reported in the recent full current drive operation of Tore Supra where the plasma current is sustained with the Lower Hybrid, LH, wave. Current profile evolution and thermal electron transport coefficients are directly assessed using the data of the new fast electron Bremsstrahlung tomography that provides the most accurate determination of the LH current and power deposition profiles. The spontaneous rise of the core electron temperature observed a few seconds after the application of the LH power is ascribed to a bifurcation towards a state of reduced electron transport. The role of the magnetic shear is invoked to partly stabilize the anomalous electron turbulence. The electron temperature transition occurs when the q-profile evolves towards a non-inductive state with a non-monotonic shape i.e. when the magnetic shear is reduced close to zero in the plasma core. The improved core confinement phase is often terminated by a sudden MHD activity when the minimum q approaches two. (authors)

  7. Sulphur in Poland

    Directory of Open Access Journals (Sweden)

    Seman Peter

    2001-12-01

    Full Text Available Poland belongs to one of the last countries with native sulphur mining. Its history begun in 15th century. Deposit area of Tarnobrzeg re-presents 80% of all known sulphur reserves in this country. All of explored deposits in this area were created by metasomatic alteration of sulphur bearing limestones with sulphur mineralised liquids, which arised from melt gypsum. The average content is 25 - 30% of sulphur in Tarnobrzeg area. Considerable parts of deposits are created by calcite and native sulphur. Gypstone, baryte and stroncianite have only minera-logic occurencies. The extensive native sulphur deposits account for 88% of the country´s sulphur production. There were five sulphur mines in operation: Jeziórko, Grêbów, Machów I, Machów II and Basznia, but operations in Basznia were ended in 1992 and Machów and Machów II were liquidated. The sixth mine Osiek is currently producing. Only the Machów I mine operated an open-pit extraction and refining process, the other four mines producing sulphur using a modified Frasch method that gives elemental sulphur of up to 99,9% purity. Sulphur is an important export commodity with foreign sales totalling around 1.5 - 2.5 Mt/y. Modern benefication methods, which allowing to achieve sulphur from hydrocarbons, are causing decrease of native sulphur prices in the world and bringing about reduction of mining activities for this raw material in Poland.

  8. Radiation emergency planning in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Niewodniczanski, J [National Atomic Energy Agency, Warsaw (Poland)

    1996-08-01

    The paper presents a schematic outline of the radiation emergency policy in Poland, rather from the point of view of logistics of the problem than discussing details of existing or proposed procedures. (author). 5 refs, 1 fig.

  9. Untangling the contributions of image charge and laser profile for optimal photoemission of high-brightness electron beams

    International Nuclear Information System (INIS)

    Portman, J.; Zhang, H.; Makino, K.; Ruan, C. Y.; Berz, M.; Duxbury, P. M.

    2014-01-01

    Using our model for the simulation of photoemission of high brightness electron beams, we investigate the virtual cathode physics and the limits to spatio-temporal and spectroscopic resolution originating from the image charge on the surface and from the profile of the exciting laser pulse. By contrasting the effect of varying surface properties (leading to expanding or pinned image charge), laser profiles (Gaussian, uniform, and elliptical), and aspect ratios (pancake- and cigar-like) under different extraction field strengths and numbers of generated electrons, we quantify the effect of these experimental parameters on macroscopic pulse properties such as emittance, brightness (4D and 6D), coherence length, and energy spread. Based on our results, we outline optimal conditions of pulse generation for ultrafast electron microscope systems that take into account constraints on the number of generated electrons and on the required time resolution.

  10. Symphytocarpus trechisporus (Myxogastrea in Poland

    Directory of Open Access Journals (Sweden)

    Salamaga Agnieszka

    2014-12-01

    Full Text Available Symphytocarpus trechisporus (Berk. ex Torrend Nann.-Bremek. is rare in Poland, known previously from only one locality. Sixty years after the original report, this paper presents two new localities of it in separate regions of Poland. Although S. trechisporus is recorded mostly on Sphagnum sp., the taxon does not seem to be attached to a specific substrate; rather it is associated with acidic habitats.

  11. Gender Pay Gap in Poland

    OpenAIRE

    Oczki, Jarosław

    2016-01-01

    The aim of the article is to investigate the actual and explained gender pay gaps in Poland in comparison with selected highly developed countries, and to discuss the factors determining wage disparities between men and women. Data from Eurostat EU-SILC and the International Labour Organization were used. The article concludes that the gender pay gap in Poland is relatively small and decreasing, and that estimates of the explained gender pay gap published by the Internationa...

  12. Rubella in Poland in 2013.

    Science.gov (United States)

    Korczyńska, Monika Roberta; Paradowska-Stankiewicz, Iwona

    2015-01-01

    In 2004, Poland has adopted the WHO goal of rubella elimination and congenital rubella syndrome prevention. The main target of the Programme is to stop transmission of the virus in the environment and prevention of congenital rubella in children. This can be achieved by carrying out the vaccination. Participation in the rubella elimination program requires clinical diagnosis of rubella cases and their confirmation with laboratory test. In Poland, until 2003, national vaccination recommendation included a dose of rubella vaccine only for girls aged 13 years. Among men, the incidence of measles remained high creating a risk of infection of non-immune pregnant women which may lead to the development of congenital rubella syndrome in the child. To assess epidemiological situation of rubella in Poland in 2013, including vaccination coverage in Polish population. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins "Infectious diseases and poisonings in Poland in 2013" and "Vaccinations in Poland in 2013" (MP. Czarkowski, Warszawa 2014, NIZP-PZH, GIS). In 2013, there was big epidemic of rubella in Poland--with 38,548 registered cases (6 times more than in 2012), incidence 84.4 per 100,000 (5 times higher than in the previous year). The highest incidence rate, regardless of gender and the environment, was observed among adolescents aged 15-19 years (911.6 per 100,000). The incidence of rubella in boys and men was significantly higher than the incidence in girls and women (181.4 versus 23.9). In 2013, two cases of congenital rubella syndrome were registered. Rubella epidemic which occurred in Poland in 2013 was the result of use in the past vaccination against rubella only for girls 13 years of age. The proportion of laboratory tests confirming/excluding rubella infection is still very low in Poland. In 2013, only 0.2% of rubella cases were laboratory confirmed.

  13. Chickenpox in Poland in 2012.

    Science.gov (United States)

    Rogalska, Justyna; Paradowska-Stankiewicz, Iwona

    2014-01-01

    A number of chickenpox cases, occurring especially in children, indicates the rationale for the use of chickenpox vaccinations. In Poland since 2002, chickenpox vaccination is included in the National Immunisation Programme as recommended. To assess epidemiological situation of chickenpox in Poland in 2012 in comparison to previous years. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins "Infectious diseases and poisonings in Poland in 2012" and "Vaccinations in Poland in 2012" (Czarkowski MP i in., Warszawa 2013, NIZP-PZH i GIS). National Immunisation Programme for year 2012 was also used. In 2012, 208 276 cases of chickenpox were registered in Poland. The highest number of cases was reported in Śląskie voivodeship, the lowest in Podlaskie voivodeship. Mumps incidence was 540.5 per 100 000 and was higher than in 2011 (448.7). The highest incidence was recorded in children aged 4 years (7 611.5 per 100 000). The chickenpox incidence among men (570.7) was higher than among women (512.2). The incidence among rural residents (553.9) was higher than among urban residents (531.8). Number of cases hospitalized due to mumps was 1 361. Number of people vaccinated against chickenpox was 56 213. In 2012, there was an increase in the incidence of smallpox in Poland. This trend is continuing since 2004, which can be partly explained by improved surveillance of the disease.

  14. The profile of the electron beam in the PTB synchrotron, and its influence on radiometric measurements with synchrotron radiation

    International Nuclear Information System (INIS)

    Kaase, H.

    1976-01-01

    A simple method is described to determine the beam profile in an electron synchrotron; the measured results are compared with calculated values. Moreover, the influence of synchrotron- and betatron-oscillations on synchrotron radiation measurements is discussed, and a method is given to correct this. (orig.) [de

  15. Quantitative explanation of some electron temperature profiles measured in situ in the high latitude ionospheric E-region

    International Nuclear Information System (INIS)

    Schlegel, K.; Oyama, Koh-ichiro; Hirao, Kunio

    1983-01-01

    E region electron temperature profiles obtained with a rocket experiment in the Antarctica are compared to theoretical electron temperatures calculated from a model. The main heat source in this model is the heating of the electron gas by unstable plasma waves. Very good agreement between both temperatures is obtained between 105 and 115 km altitude, where this heating mechanism is effective. The agreement is also good below this altitude range, after a refinement of the data analysis procedure for the measured temperatures. Several important consequences of the good agreement are pointed out. (author)

  16. Nutrient Profiles and Volatile Odorous Compounds of Raw Milk After Exposure to Electron Beam Pasteurizing Doses.

    Science.gov (United States)

    Ward, Lindsay R; Kerth, Chris R; Pillai, Suresh D

    2017-07-01

    Raw milk is known to contain relatively high numbers of microorganisms, some of which include microbial pathogens. Electron beam (eBeam) processing is a nonthermal pasteurization food processing technology. The underlying hypothesis was that eBeam processing will not negatively influence the composition, nutrient content, and aroma profile of raw milk. Raw milk samples were exposed to eBeam doses of 1 and 2 kGy, since our studies had shown that 2 kGy is suitable for raw milk pasteurization. The untreated and eBeam-treated raw milk samples were analyzed to detect changes in lactose, vitamin B 2 , vitamin B 12 , and calcium concentrations. The possible breakdown of casein and whey proteins and lipid oxidation were investigated along with the formation of volatile aroma compounds. Even though vitamin B 2 showed a 31.6% decrease in concentration, the B 2 content in eBeam-pasteurized raw milk met all USDA nutritional guidelines. Even though there were no indications of lipid oxidation after the 2.0-kGy eBeam treatment, there was lipid oxidation (58%) after 7 d of refrigerated storage. However, based on the GC-olfactory analysis, the lipid oxidation did not necessarily result in the development of a wide variety of off-odors. © 2017 Institute of Food Technologists®.

  17. Mumps in Poland in 2012.

    Science.gov (United States)

    Rogalska, Justyna; Paradowska-Stankiewicz, Iwona

    2014-01-01

    Vaccination against mumps, introduced initially as recommended, from 2003 is mandatory in Poland and given as two dose scheme with MMR vaccine (mumps, measles, and rubella). Despite observed decline in mumps incidence for over a decade which is a result of conducted vaccinations, mumps is still a common childhood disease in Poland. To assess epidemiological situation of mumps in Poland in 2012, including vaccination coverage in Polish population, in comparison to previous years. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins "Infectious diseases and poisonings in Poland in 2012" and "Vaccinations in Poland in 2012" (Czarkowski MP i in., Warszawa 2013, NIZP-PZH i GIS). Mumps cases were classified according to the criteria of surveillance case definition implemented in the European Union (Commission Decision of 28 April 2008 amending Decision 2002/253/EC). National Immunisation Programme for year 2012 was also used. In total, there were 2779 mumps cases registered in Poland in 2012. Incidence of mumps was 7.2 per 100 000 and it was higher by 7.5% in comparison with 2011 and lower by 19.4% in comparison to median for the years 2006-2010. The highest incidence rate was observed among children aged 5 years (71.8 per 100 000). Incidence in women (5.9) was lower than in men (8.6). In 2012, 25 people were hospitalized due to mumps. Vaccination coverage of children aged 3 years in Poland in 2012 was 97.9%. Systematic execution of mumps vaccination in accordance with the National Immunisation Programme resulted in a significant decrease in the number of registered cases. Due to the high vaccination coverage further decline in the number of cases is expected.

  18. Application of constrained deconvolution technique for reconstruction of electron bunch profile with strongly non-Gaussian shape

    Science.gov (United States)

    Geloni, G.; Saldin, E. L.; Schneidmiller, E. A.; Yurkov, M. V.

    2004-08-01

    An effective and practical technique based on the detection of the coherent synchrotron radiation (CSR) spectrum can be used to characterize the profile function of ultra-short bunches. The CSR spectrum measurement has an important limitation: no spectral phase information is available, and the complete profile function cannot be obtained in general. In this paper we propose to use constrained deconvolution method for bunch profile reconstruction based on a priori-known information about formation of the electron bunch. Application of the method is illustrated with practically important example of a bunch formed in a single bunch-compressor. Downstream of the bunch compressor the bunch charge distribution is strongly non-Gaussian with a narrow leading peak and a long tail. The longitudinal bunch distribution is derived by measuring the bunch tail constant with a streak camera and by using a priory available information about profile function.

  19. Application of constrained deconvolution technique for reconstruction of electron bunch profile with strongly non-Gaussian shape

    International Nuclear Information System (INIS)

    Geloni, G.; Saldin, E.L.; Schneidmiller, E.A.; Yurkov, M.V.

    2004-01-01

    An effective and practical technique based on the detection of the coherent synchrotron radiation (CSR) spectrum can be used to characterize the profile function of ultra-short bunches. The CSR spectrum measurement has an important limitation: no spectral phase information is available, and the complete profile function cannot be obtained in general. In this paper we propose to use constrained deconvolution method for bunch profile reconstruction based on a priori-known information about formation of the electron bunch. Application of the method is illustrated with practically important example of a bunch formed in a single bunch-compressor. Downstream of the bunch compressor the bunch charge distribution is strongly non-Gaussian with a narrow leading peak and a long tail. The longitudinal bunch distribution is derived by measuring the bunch tail constant with a streak camera and by using a priory available information about profile function

  20. Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks

    International Nuclear Information System (INIS)

    Sesnic, S.; Diesso, M.; Hill, K.; Holland, A.; Pohl, F.

    1988-01-01

    Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron temperature, the Be filter thickness, and the electronic parameters of the acquisition system are known. PG 1810,1812 ID 131801CON N X-ray diagnostics TT Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks AU S. Sesnic, M. Diesso, K. Hill, and A. Holland LO Princeton University, Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543 AU F. Pohl LO Max-Planck Institut fuer Plasmaphysik, 8046-Garching, Federal Republic of Germany SD (Presented on 16 March 1988) AB Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron tempe

  1. Modeling and control of the current density profile in Tokamaks and its relation to electron transport

    International Nuclear Information System (INIS)

    Zucca, C.

    2009-04-01

    current drive schemes employed. The increase of confinement with the negative magnetic shear was observed to be gradual, but constant, and did not depend on specific values of the safety factor. Therefore, the transition from standard to improved confinement appeared to be smooth, although it can be very fast. The flexible EC system in TCV allowed us to attain strong global confinement improvement to produce eITB regimes. It also permitted us to perform transport studies on plasmas characterized by low confinement, in which we modified the magnetic shear profile, locally, around the deposition location. For instance, alternate and periodic injection of co- and counter-ECCD within the same plasma discharge has been realized on TCV, while maintaining the same amount of total input EC power. Such a heating scheme has been the basis of Swing ECCD experiments, which were initially carried out using nearly off-axis EC deposition locations in the plasma, in order to maximize the EC power absorption, and therefore the magnetic shear variation. ASTRA, interfaced with the experimental data and the CQL3D code for the computation of the EC heating and current drive sources, has again been used as a reliable tool for transport analysis and planning of new experiments. The simulations have pointed out the effects of Swing ECCD on the magnetic shear and on the electron temperature profile around the radius at which the EC waves are absorbed. Both profiles turned out to be modulated at the same frequency as the frequency of the Swing ECCD. Moreover, the maximum magnetic shear variation has been observed to be independent of the transport models used for the simulations, therefore underlying the robustness of the modeling. Additionally, the numerical results have motivated further experiments with more off-axis EC deposition, which were found roughly in agreement with recent gyrokinetic predictions, according to which, at higher positive values of the magnetic shear, an inversion of the

  2. Monitoring of the current profile by using cyclotronic electron waves in tokamaks; Controle du profil de courant par ondes cyclotroniques electroniques dans les tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, R

    2001-08-01

    The subject of this thesis is the study of the cyclotronic electron wave as a monitoring tool of the current profile. The first chapter is dedicated to basic notions concerning tokamak plasmas and current generation. The second chapter is centered on the use of fast electrons to generate current and on its modelling. The propagation and absorption of the cyclotronic electron wave require a specific polarization state whose characteristics must be carefully chosen according to some parameters of the discharge, the chapter 3 deals with this topic. The absorption of a wave in a plasma depends greatly on the velocity distribution of the particles that make up the plasma and this distribution is constantly modified by the energy of the wave, so this phenomenon is non-linear and its physical description is difficult. In a case of a fusion plasma, a sophisticated approximation called quasi-linear theory can be applied with some restrictions that are presented in chapter 4. Chapters 5 and 6 are dedicated to kinetics scenarios involving the low hybrid wave and the cyclotronic electron wave inside the plasma. Some experiments dedicated to the study of the cyclotronic electron wave have been performed in Tore-supra (France) and FTU (Italy) tokamaks, they are presented in the last chapter. (A.C.)

  3. A compact CMA spectrometer with axially integrated hybrid electron-ion gun for ISS, AES and sputter depth profile analysis

    International Nuclear Information System (INIS)

    Gisler, E.; Bas, E.B.

    1986-01-01

    Until now, the combined application of electrons and ions in surface analysis required two separate sources for electrons and ions with different incidence angles. The newly developed hybrid electron-ion gun, however, allows bombardment of the same sample area both with noble gas ions and with electrons coming from the same direction. By integrating such a hybrid gun axially in a cylindrical mirror energy analyser (CMA) a sensitive compact single flange spectrometer obtains for ion scattering spectroscopy (ISS), Auger electron spectroscopy (AES), and sputtering all within normal beam incidence. This concept makes accurate beam centering very easy. Additionally, the bombardment from the same direction both for sputtering and for surface analysis brings advantages in depth profiling. The scattering angle for ISS has a constant value of about 138 0 . The hybrid gun delivers typically an electron beam current of -20μA at 3keV for AES, and an ion beam current of +40 nA and +1.2μA at 2 keV for ISS and sputtering respectively. The switching time between ISS, AES, and sputtering mode is about 0.1 s. So this system is best suited for automatically controlled depth profile analysis. The design and operation of this new system will be described and some applications will be discussed. (author)

  4. Self-consistent electronic structure and segregation profiles of the Cu-Ni (001) random-alloy surface

    DEFF Research Database (Denmark)

    Ruban, Andrei; Abrikosov, I. A.; Kats, D. Ya.

    1994-01-01

    We have calculated the electronic structure and segregation profiles of the (001) surface of random Cu-Ni alloys with varying bulk concentrations by means of the coherent potential approximation and the linear muffin-tin-orbitals method. Exchange and correlation were included within the local......-density approximation. Temperature effects were accounted for by means of the cluster-variation method and, for comparison, by mean-field theory. The necessary interaction parameters were calculated by the Connolly-Williams method generalized to the case of a surface of a random alloy. We find the segregation profiles...

  5. A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

    International Nuclear Information System (INIS)

    Dias, Luís G.; Veloso, Ana C.A.; Sousa, Mara E.B.C.; Estevinho, Letícia; Machado, Adélio A.S.C.

    2015-01-01

    Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens relative

  6. A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Luís G., E-mail: ldias@ipb.pt [Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); CQ-VR, Centro de Química – Vila Real, University of Trás-os-Montes e Alto Douro, Apartado 1013, 5001-801 Vila Real (Portugal); Veloso, Ana C.A. [Instituto Politécnico de Coimbra, ISEC, DEQB, Rua Pedro Nunes, Quinta da Nora, 3030-199 Coimbra (Portugal); CEB-Centre of Biological Engineering, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Sousa, Mara E.B.C.; Estevinho, Letícia [CIMO-Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); Machado, Adélio A.S.C. [LAQUIPAI – Laboratório de Química Inorgânica Pura e de Aplicação Interdisciplinar, Departamento de Química, Faculdade de Ciências da, Universidade do Porto, Rua Campo Alegre n°. 687, 4169-007 Porto (Portugal); and others

    2015-11-05

    Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens

  7. Salmonellosis in Poland in 2012.

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Czarkowski, Mirosław P

    2014-01-01

    The purpose of the study was evaluation of epidemiological situation of salmonellosis in Poland in 2012 compared to the previous years. The main source of data for this study are statistical overviews contained in the annual bulletins "Infectious Diseases in Poland in 2012" (NIZP-PZH, GIS, Warsaw 2013), reports from investigations obtained from the sanitary epidemiological stations. Information on deaths due to infectious and parasitic diseases registered in Poland in 2012 and earlier years is based on the data from the Department for Demographic Research of Central Statistical Office. For the purpose of surveillance cases were classified according to the case definition. In Poland in 2012, it was reported a total of 8 444 cases of zoonotic salmonellosis including 8 267 cases of intestinal salmonellosis and 177 of extraintestinal one. The incidence was 21.9/100 000. The criteria for a confirmed case met more than 94% of cases. The number of reported cases was lower than in 2011, reflecting the continued downward trend in the number of cases of salmonellosis in Poland. A very high percentage (69.4%) hospitalizations of people infected with zoonotic Salmonella remains. In outbreaks proportion of hospitalizations accounted for one third of the cases. Predominated children under the age of 5 years. Seven people died of salmonellosis. In 2012, it was reported 181 outbreaks caused by Salmonella in which 1 511 people still. They were mostly small family outbreaks. The most common etiological agent of salmonellosis in Poland is S. enteritidis, but slightly increases the percentage cases, for which no serologic type was determined. In 2012 it stood at 14%. This proportion was highest in the Pomorskie province and amounted to 58%. Keeping up for more than 10 years in the percentage of salmonellosis hospitalization rate at 70%, indicates underreporting of the disease in the country and mostly detection of the cases requiring hospital treatment. Growing proportion of

  8. Chickenpox in Poland in 2013.

    Science.gov (United States)

    Korczyńska, Monika Roberta; Rogalska, Justyna

    2015-01-01

    A large number of chickenpox cases, occurring especially in children, indicates the rationale for the use of chickenpox vaccinations. In Poland since 2002, chickenpox vaccination is included in the National Immunisation Programme as recommended. To assess epidemiological situation of chickenpox in Poland in 2013 in comparison to previous years. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins "Infectious diseases and poisonings in Poland in 2013" and "Vaccinations in Poland in 2013" (Czarkowski MP i in., Warszawa 2014, NIZP-PZH i GIS). National Immunisation Programme for year 2013 was also used. In 2013, 178 501 cases of chickenpox were registered in Poland. The incidence was 463.6 and was lower than in 2012 (540.5). The highest number of cases was reported in mazowieckie voivodeship, the lowest in podlaskie voivodeship. The highest incidence was recorded in children aged 4 years (6 545.1 per 100,000). The chickenpox incidence among men (491.7) was higher by 12.4% comparing to women (437.3). The incidence among rural residents (497.2) was higher than among urban residents (441.7). Number of cases hospitalized due to mumps was 1 184. Number of people vaccinated against chickenpox was 57 168. In 2013, there was decrease in the incidence of chickenpox [corrected] in Poland with small fluctuations. Since 2002 the number of people vaccinated against chickenpox increased. The increase in the number of people vaccinated against chickenpox would help maintain the downward trend in subsequent years.

  9. Rubella in Poland in 2014

    Science.gov (United States)

    Paradowska-Stankiewicz, Iwona; Rogalska, Justyna; Polkowska, Aleksandra

    2016-01-01

    In 2004, Poland has adopted the WHO goal of rubella elimination and congenital rubella syndrome prevention. The main target of the Programme is to stop transmission of the virus in the environment and prevention of congenital rubella in children. In Poland participation in the rubella elimination program requires clinical diagnosis of rubella cases and their confirmation with laboratory tests. Vaccination against rubella was introduced in 1987, initially only in 13 - year-old girls. Since 2003, single jab vaccination against rubella, measles and mumps is used (MMR vaccine for all children: primary vaccination at the age 13-15 months and a booster vaccination at the age of 10). To assess epidemiological situation of rubella in Poland in 2014, including vaccination coverage in Polish population. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins “Infectious diseases and poisonings in Poland in 2014” and “Vaccinations in Poland in 2014” (MP. Czarkowski, Warszawa 2014, NIZP-PZH, GIS). In 2014, there was a significant decrease in the number of rubella cases - with registered 5891 cases (in 2013 - 38 548 cases) - and a decline in incidence (from 101.1 per 100 000 to 15.3). The highest incidence, regardless of gender and the environment was observed in the age group 5-6 years (respectively 93.8 and 109.4 per 100 000). Similarly to 2013, rubella incidence of males was higher than the incidence in girls and women (20.0 versus 10.9). In 2014, no cases of congenital rubella syndrome were registered. The proportion of laboratory tests confirming/excluding rubella infection is still very low in Poland. In 2014, only 0.6% of rubella cases were laboratory confirmed.

  10. Mumps in Poland in 2013.

    Science.gov (United States)

    Korczyńska, Monika Roberta; Rogalska, Justyna

    2015-01-01

    Vaccination against mumps from 2003 is mandatory in Poland and given as two dose scheme with MMR vaccine (mumps, measles, and rubella). Earlier this vaccination was only recommended. Despite observed decline in mumps incidence for over a decade which is a result of conducted vaccinations, mumps is still a common childhood disease. To assess epidemiological situation of mumps in Poland in 2013, including vaccination coverage in Polish population, in comparison to previous years. The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletins "Infectious diseases and poisonings in Poland in 2013" and "Vaccinations in Poland in 2013" (Czarkowski MP i in., Warszawa 2013, NIZP-PZH i GIS). Mumps cases were classified according to the criteria of surveillance case definition implemented in the European Union (Commission Decision of 28 April 2008 amending Decision 2002/253/EC). National Immunisation Programme for year 2013 was also used. In total, there were 2 436 mumps cases registered in Poland in 2013. Incidence of mumps was 6.3 per 100,000 and it was lower by 12.5% in comparison with 2012 and lower by 18.2% in comparison with median for the years 2007-2010. The highest incidence rate was observed among children aged 5 years (54.0 per 100,000). Incidence in men (7.5) was higher than in women (5.2). In 2013, 38 people were hospitalized due to mumps. Vaccination coverage of children aged 3 years in Poland in 2013 was 97.5% and it was lower by 0.4% in comparison with year 2012. Systematic execution of mumps vaccination in accordance with the National Immunisation Programme resulted in a significant decrease in the number of registered cases. Due to the high vaccination coverage further decline in the number of cases is expected.

  11. Observation of the skin-like profiles of electron temperature and density of turbulently heated plasmas in the TRIAM-1 tokamak

    International Nuclear Information System (INIS)

    Hiraki, Naoji; Nakamura, Kazuo; Toi, Kazuo; Itoh, Satoshi

    1980-01-01

    The time evolution of electron temperature and density profiles are measured on the turbulent heating experiment in the TRIAM-1 tokamak. The skin-like profiles of electron temperature and density are observed just after the application of the pulsed electric field for turbulent heating. The width of the skin layer of the electron temperature profile is about 1 cm, and agrees well with the theoretical value. The above mentioned skin heating of electrons just after the heating pulse is also spectroscopically confirmed by the remarkable decrease of the volume emission of visible lines which is localized at the outer plasma region. (author)

  12. Observation of the skin-like profiles of electron temperature and density of turbulently heated plasmas in the TRIAM-1 tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Hiraki, N; Nakamura, K; Toi, K; Itoh, S [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1980-07-01

    The time evolution of electron temperature and density profiles are measured on the turbulent heating experiment in the TRIAM-1 tokamak. The skin-like profiles of electron temperature and density are observed just after the application of the pulsed electric field for turbulent heating. The width of the skin layer of the electron temperature profile is about 1 cm, and agrees well with the theoretical value. The above mentioned skin heating of electrons just after the heating pulse is also spectroscopically confirmed by the remarkable decrease of the volume emission of visible lines which is localized at the outer plasma region.

  13. Radiation monitoring network in Poland

    International Nuclear Information System (INIS)

    Grabowski, D.; Kurowski, W.; Muszynski, W.; Rubel, B.; Smagala, G.; Swietochowska, J.

    2001-01-01

    In Poland the radioactive contamination of the environment and food has been controlled since the early sixties by the Service for Measurements of Radioactive Contamination (SPSP). The service comprises a network of measuring stations and the Centre of Radioactive Contamination Measurements (COPSP). Actually, there are 100 measurement stations. The main task of such station is systematic measurement of radioactivity level in samples of environment components and food. Nine stations of SPSP acting within meteorological stations, ten stations of low level air radioactivity measurements (Aerosols Sampling Stations-500) and eleven permanent monitoring stations (PMS) form the radiation monitoring warning system in Poland. (author)

  14. [Salmonellosis in Poland in 2010].

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Furman, Sylwia; Czarkowski, Mirosław P

    2012-01-01

    The aim of this study is to present the epidemiology of salmonellosis in Poland in 2010. The study was based on data from: "the Infectious diseases and poisonings in Poland 2010", information from laboratories based in sanitary stations, the forms of outbreaks investigations conducted by sanitary stations and data from Demographic Surveys Departament based in the Central Statistical Office. All cases were classified according to the case definition used by surveillance. A total of9 732 salmonellosis cases were reported in Poland. Among them 8 549 cases were intestinal and 183 were extraintestinal. The incidence rate was 25.5 per 100 000 inhabitants. Over 95% of cases met the criteria for a confirmed case. The number of registered cases was higher than in the previous two years, despite this an overall decreasing trend was observed in the number of cases of salmonellosis in Poland. Cases of salmonellosis occurred primarily among children under 5-years old. There were no deaths reported due to salmonellosis. There is still a high percentage, about 70%, hospital admissions of people infected with zoonotic Salmonella. The percentage of hospitalization in outbreaks is almost two and a half times lower -29%. In 2010, 189 outbreaks caused by Salmonella were reported, affecting 1 662 people (almost 18% of all reported cases of intestinal salmonellosis). Most were small family outbreaks. Still the most common etiologic agent in Poland is S. Enteritidis. When compared with previous years, in 2010 there was an increase in the number of cases caused by S. Mbandaka, S. Infantis and S. Virchow. The number of screening tests for carriers among food handlers decreased by over 10% however the percentage diagnosed with positive result increased from 0.3% to 0.5%. Human salmonellosis is still a significant public health problem in Poland. The very high percentage (70%) of hospitalization, persisting for many years indicates that diagnosis and reporting ofsalmonellosis in Poland is

  15. Poland's energy, a special case

    International Nuclear Information System (INIS)

    Furfari, Samuele

    2014-01-01

    Poland, the sixth member state in terms of population (39 million inhabitants) and with the eighth largest GDP in the EU, stands out more and more clearly on the environmental front, especially as far as energy is concerned. One of the reasons may be that in terms of GDP/capita Poland comes only 23 out of 27... The only European economy to have grown every year over the last twenty years, it has given higher priority than elsewhere to promoting growth, to production cost reduction and to limiting increases in consumer prices. (author)

  16. Renewable Energy Policy Fact sheet - Poland

    International Nuclear Information System (INIS)

    2017-09-01

    The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Mid-2016 Poland revamped its national support scheme for electricity from renewable energy sources, started to phase out a certificates-backed renewable electricity quota scheme, and put in place a feed-in tariff/feed-in premium (FiT/FiP) system in place with the support levels being determined by approved tender bids. Furthermore, a fiscal and soft loan instrument is used for supplementary support. Three subsidy instruments and a soft loan instrument are deployed for the promotion of renewable heat. Renewable energy in transport is promoted through a bio-fuels quota scheme

  17. Local electron mean energy profile of positive primary streamer discharge with pin-plate electrodes in oxygen—nitrogen mixtures

    International Nuclear Information System (INIS)

    Sima Wen-Xia; Peng Qing-Jun; Yang Qing; Yuan Tao; Shi Jian

    2013-01-01

    Local electron mean energy (LEME) has a direct effect on the rates of collisional ionization of molecules and atoms by electrons. Electron-impact ionization plays an important role and is the main process for the production of charged particles in a primary streamer discharge. Detailed research on the LEME profile in a primary streamer discharge is extremely important for a comprehensive understanding of the local physical mechanism of a streamer. In this study, the LEME profile of the primary streamer discharge in oxygen-nitrogen mixtures with a pin-plate gap of 0.5 cm under an impulse voltage is investigated using a fluid model. The fluid model includes the electron mean energy density equation, as well as continuity equations for electrons and ions and Poisson's electric field equation. The study finds that, except in the initial stage of the primary streamer, the LEME in the primary streamer tip tends to increase as the oxygen-nitrogen mole ratio increases and the pressure decreases. When the primary streamer bridges the gap, the LEME in the primary streamer channel is smaller than the first ionization energies of oxygen and nitrogen. The LEME in the primary streamer channel then decreases as the oxygen-nitrogen mole ratio increases and the pressure increases. The LEME in the primary streamer tip is primarily dependent on the reduced electric field with mole ratios of oxygen-nitrogen given in the oxygen-nitrogen mixtures. (physics of gases, plasmas, and electric discharges)

  18. Mitigation of the electron-cloud effect in the PSR and SNS protonstorage rings by tailoring the bunch profile

    CERN Document Server

    Pivi, M T

    2003-01-01

    For the storage ring of the Spallation Neutron Source (SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electron cloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure.

  19. MITIGATION OF THE ELECTRON-CLOUD EFFECT IN THE PSR AND SNS PROTONSTORAGE RINGS BY TAILORING THE BUNCH PROFILE

    International Nuclear Information System (INIS)

    Pivi, Mauro T F

    2003-01-01

    For the storage ring of the Spallation Neutron Source (SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electron cloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure

  20. Modification of the Current Profile in DIII-D by Off-Axis Electron Cyclotron Current Drive

    International Nuclear Information System (INIS)

    Luce, T.C.; Lin-Liu, Y.R.; Harvey, R.W.; Giruzzi, G.; Lohr, J.M.; Petty, C.C.; Politzer, P.A.; Prater; Rice, B.W.

    1999-01-01

    Localized non-inductive currents due to electron cyclotron wave absorption have been measured on the DIII-D tokamak. Clear evidence of the non-inductive currents is seen on the internal magnetic field measurements by motional Stark effect spectroscopy. The magnitude and location of the non-inductive current is evaluated by comparing the total and Ohmic current profiles of discharges with and without electron cyclotron wave power. The measured current agrees with Fokker-Planck calculations near the magnetic axis, but exceeds the predicted value as the location of the current drive is moved to the half radius

  1. Interpretation of ion flux and electron temperature profiles at the JET divertor target during high recycling and detached discharges

    International Nuclear Information System (INIS)

    Monk, R.D.

    1997-01-01

    Detailed experiments have been carried out with the JET Mark I pumped divertor to characterise high recycling and detached plasma regimes. This paper presents new measurements of high resolution divertor ion flux profiles that identify the growth of additional peaks during high recycling discharges. These ion flux profiles are used in conjunction with Dα and neutral flux measurements to examine the physics of divertor detachment and compare against simple analytic models. Finally, problems are highlighted with conventional methods of single and triple probe interpretation under high recycling conditions. By assuming that the single probe behaves as an asymmetric double probe the whole characteristic may be fitted and significantly lower electron temperatures may be derived when the electron to ion saturation current ratio is reduced. The results from the asymmetric double probe fit are shown to be consistent with independent diagnostic measurements. (orig.)

  2. High-Latitude Topside Ionospheric Vertical Electron-Density-Profile Changes in Response to Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir A.; Truhlik, Vladimir; Wang, Yongli; Bilitza, Dieter; Fung, Shing F.

    2015-01-01

    Large magnetic-storm induced changes have been detected in high-latitude topside vertical electron-density profiles Ne(h). The investigation was based on the large database of topside Ne(h) profiles and digital topside ionograms from the International Satellites for Ionospheric Studies (ISIS) program available from the NASA Space Physics Data Facility (SPDF) at http://spdf.gsfc.nasa.gov/isis/isis-status.html. This large database enabled Ne(h) profiles to be obtained when an ISIS satellite passed through nearly the same region of space before, during, and after a major magnetic storm. A major goal was to relate the magnetic-storm induced high-latitude Ne(h) profile changes to solar-wind parameters. Thus an additional data constraint was to consider only storms where solar-wind data were available from the NASA/SPDF OMNIWeb database. Ten large magnetic storms (with Dst less than -100 nT) were identified that satisfied both the Ne(h) profile and the solar-wind data constraints. During five of these storms topside ionospheric Ne(h) profiles were available in the high-latitude northern hemisphere and during the other five storms similar ionospheric data were available in the southern hemisphere. Large Ne(h) changes were observed during each one of these storms. Our concentration in this paper is on the northern hemisphere. The data coverage was best for the northern-hemisphere winter. Here Ne(h) profile enhancements were always observed when the magnetic local time (MLT) was between 00 and 03 and Ne(h) profile depletions were always observed between 08 and 10 MLT. The observed Ne(h) deviations were compared with solar-wind parameters, with appropriate time shifts, for four storms.

  3. Compton profiles and electronic structure of HgBr{sub 2} and HgI{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, G.; Dashora, Alpa [Department of Physics, University College of Science, M.L. Sukhadia University, Udaipur, 313001 Rajasthan (India); Sharma, M. [Physics Division, State Forensic Science Laboratory, Jaipur, 302016 Rajasthan (India); Ahuja, B.L. [Department of Physics, University College of Science, M.L. Sukhadia University, Udaipur, 313001 Rajasthan (India)], E-mail: blahuja@yahoo.com

    2010-02-15

    In this paper, we present the first-ever experimental Compton line shapes of HgBr{sub 2} and HgI{sub 2} using {sup 137}Cs Compton spectrometer. To compare our experimental momentum densities, we have computed the Compton profiles using Hartree-Fock and density functional theory within linear combination of atomic orbitals. We have also computed the energy bands and density of states using the linear combination of atomic orbitals and full potential linearized augmented plane wave method. On the basis of equal-valence-electron-density profiles, it is seen that HgI{sub 2} is more covalent than HgBr{sub 2} which is in agreement with the valence charge densities. The experimental isotropic profiles are found to be relatively in better agreement with the Hartree-Fock data. We have also discussed the photoluminescence and detection properties of both the halides.

  4. Role of substituents on the reactivity and electron density profile of ...

    Indian Academy of Sciences (India)

    In addition, the possible strength of interaction of these ligands ... The measure of some important electronic properties such as .... contributes to the lowering of the total binding energy ... ties like ionization energies and electron affinities, etc.

  5. Density and temperature profile modifications with electron cyclotron power injection in quiescent double barrier discharges on DIII-D

    International Nuclear Information System (INIS)

    Casper, T A; Burrell, K H; Doyle, E J; Gohil, P; Lasnier, C J; Leonard, A W; Moller, J M; Osborne, T H; Snyder, P B; Thomas, D M; Weiland, J; West, W P

    2006-01-01

    Quiescent double barrier (QDB) conditions often form when an internal transport barrier is created with high-power neutral-beam injection into a quiescent H-mode (QH) plasma. These QH-modes offer an attractive, high-performance operating scenario for burning plasma experiments due to their quasi-stationarity and lack of edge localized modes. Our initial experiments and modelling using ECH/ECCD in QDB shots were designed to control the current profile and, indeed, we have observed a strong dependence on the q-profile when EC-power is used inside the core transport barrier region. While strong electron heating is observed with EC power injection, we also observe a drop in the other core parameters, namely ion temperature and rotation, electron density and impurity concentration. At onset and termination of the EC pulse, dynamically changing conditions are induced that provide a rapid evolution of T e /T i profiles accessible with 0.3 e /T i ) axis e /T i ratio as the ion temperature and density profiles flatten with this change in transport. The change in transport is consistent with a destabilization of ITG turbulence as inferred from the reduction of the stability threshold due to the change in T e /T i

  6. Silicon diodes as an alternative to diamond detectors for depth dose curves and profile measurements of photon and electron radiation.

    Science.gov (United States)

    Scherf, Christian; Peter, Christiane; Moog, Jussi; Licher, Jörg; Kara, Eugen; Zink, Klemens; Rödel, Claus; Ramm, Ulla

    2009-08-01

    Depth dose curves and lateral dose profiles should correspond to relative dose to water in any measured point, what can be more or less satisfied with different detectors. Diamond as detector material has similar dosimetric properties like water. Silicon diodes and ionization chambers are also commonly used to acquire dose profiles. The authors compared dose profiles measured in an MP3 water phantom with a diamond detector 60003, unshielded and shielded silicon diodes 60008 and 60012 and a 0.125-cm(3) thimble chamber 233642 (PTW, Freiburg, Germany) for 6- and 25-MV photons. Electron beams of 6, 12 and 18 MeV were investigated with the diamond detector, the unshielded diode and a Markus chamber 23343. The unshielded diode revealed relative dose differences at the water surface below +10% for 6-MV and +4% for 25-MV photons compared to the diamond data. These values decreased to less than 1% within the first millimeters of water depth. The shielded diode was only required to obtain correct data of the fall-off zones for photon beams larger than 10 x 10 cm(2) because of important contributions of low-energy scattered photons. For electron radiation the largest relative dose difference of -2% was observed with the unshielded silicon diode for 6 MeV within the build-up zone. Spatial resolutions were always best with the small voluminous silicon diodes. Relative dose profiles obtained with the two silicon diodes have the same degree of accuracy as with the diamond detector.

  7. Air protection strategy in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Blaszczyk, B.

    1995-12-31

    Air quality is one of the basic factors determining the environmental quality and influencing the life conditions of people. There is a shortage of proper quality air in many regions of Poland. In consequence, and due to unhindered transport, air pollution is the direct cause of losses in the national economy (reduction of crops, losses in forestry, corrosion of buildings and constructions, worsening of people`s health). Poland is believed to be one of the most contaminated European countries. The reason for this, primarily, is the pollution concomitant with energy-generating fuel combustion; in our case it means the use of solid fuels: hard coal and lignite. This monocultural economy of energy generation is accompanied by low efficiency of energy use (high rates of energy loss from buildings, heat transmission pipelines, energy-consuming industrial processes). This inefficiency results in the unnecessary production of energy and pollution. Among other reasons, this results from the fact that in the past Poland did not sign any international agreements concerning the reduction of the emission of pollution. The activities aimes at air protection in Poland are conducted based on the Environmental Formation and Protection Act in effect since 1980 (with many further amendments) and the The Ecological Policy of the state (1991). The goals of the Polish air pollution reduction program for the period 1994-2000 are presented.

  8. Is Poland an Innovative Country?

    Science.gov (United States)

    Chybowska, Dorota; Chybowski, Leszek; Souchkov, Valeri

    2018-03-01

    The potential for innovativeness is difficult to measure, though many have attempted to do so. In order to look at Poland's innovation potential, its current position and its opportunity to grow, compared with developing and developed countries, this study analysed the patent statistics of the Polish and European Patent Offices. Poland has been a member of the European Union for over a decade now. Therefore, we took into consideration the statistics for patent applications and grants for the last decade, up to the first quarter of 2016. The questions we wanted to answer concerned not only the technology fields that Poland patented its inventions in, but also the types of patent grantees and applicants. In order to determine why Poland is still considered to be only a moderate innovator by the Innovation Union Scoreboard, we also gathered information on Polish inventors abroad in 2015 and the first quarter of 2016, to see their number, technology fields, and types of patent grantees. Finally, we attempted to identify the main barriers that seem to inhibit Polish technology and innovation growth, despite significantly growing R&D intensities (up from 0.56 GDP and EUR 1,139 M in 2004 to 0.94 GDP and EUR 3,864 M in 2014).

  9. Infusion's greenfield subsidiary in Poland

    NARCIS (Netherlands)

    Williams, C.; van Eerde, W.; The, D.

    2012-01-01

    The president of Infusion Development Corporation was reviewing the progress of the new subsidiary the company had set up 15 months earlier in Krakow, Poland. The purpose of the subsidiary was to work with other Infusion offices around the world to provide innovative software development services to

  10. Microbeam X-ray analysis in Poland - past and future

    International Nuclear Information System (INIS)

    Kusinski, J

    2010-01-01

    The article provides an overview of the development of electron beam X-ray microanalysis (EPMA) in Poland. Since the introduction by Prof. Bojarski of EMPA over 45 years ago, tremendous advances in methodologies and in instrumentation have been made in order to improve the precision of quantitative compositional analysis, spatial resolution and analytical sensitivity. This was possible due to the activity of Applied Crystallography Committee at the Polish Academy of Sciences, as well as the groups of researches working in the Institute for Ferrous Metallurgy (Gliwice), the Technical University of Warsaw, the Silesian Technical University (Katowice), the AGH-University of Sciences and Technology (Krakow), and the Institute of Materials Science and Metallurgy Polish Academy of Sciences (Krakow). Based on the research examples realized by these teams, conferences, seminars and congresses organized, as well as books and academic textbooks issued, the evolution of electron beam X-ray microanalysis in Poland is demonstrated.

  11. New developments in electron microscopy for serial image acquisition of neuronal profiles.

    Science.gov (United States)

    Kubota, Yoshiyuki

    2015-02-01

    Recent developments in electron microscopy largely automate the continuous acquisition of serial electron micrographs (EMGs), previously achieved by laborious manual serial ultrathin sectioning using an ultramicrotome and ultrastructural image capture process with transmission electron microscopy. The new systems cut thin sections and capture serial EMGs automatically, allowing for acquisition of large data sets in a reasonably short time. The new methods are focused ion beam/scanning electron microscopy, ultramicrotome/serial block-face scanning electron microscopy, automated tape-collection ultramicrotome/scanning electron microscopy and transmission electron microscope camera array. In this review, their positive and negative aspects are discussed. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  12. Time integrated x-ray measurments of the very energetic electron end loss profile in TMX-U

    International Nuclear Information System (INIS)

    Osher, J.E.; Fabyan, J.

    1984-01-01

    The time-integrated 2-D profile of the thick-target bremsstrahlung produced by energetic end loss electrons has been measured during ECRH operation of TMX-U. Sheets of x-ray film and/or arrays of thermoluminescent dosimeters were placed on the outside of the end tank end wall to measure the relative spatial x-ray profile, with locally added filters of Pb to determine the effective mean x-ray energy. The purpose of this simple survey diagnostic was to allow deduction of the gross features of the ECRH region. The electron source functions needed to fit the x-ray data were modeled for various anchor cell radial distributions mapped along magnetic field lines to the elliptical plasma potential control plates or the Al end walls. The data are generally consistent with (1) major ECR heating in the central 25-cm-diam core, (2) a mean ECRH electron loss energy of 420 keV, and (3) an ECRH coupling efficiency to these hot electrons of greater than or equal to 10%

  13. Control of quasi-monoenergetic electron beams from laser-plasma accelerators with adjustable shock density profile

    Science.gov (United States)

    Tsai, Hai-En; Swanson, Kelly K.; Barber, Sam K.; Lehe, Remi; Mao, Hann-Shin; Mittelberger, Daniel E.; Steinke, Sven; Nakamura, Kei; van Tilborg, Jeroen; Schroeder, Carl; Esarey, Eric; Geddes, Cameron G. R.; Leemans, Wim

    2018-04-01

    The injection physics in a shock-induced density down-ramp injector was characterized, demonstrating precise control of a laser-plasma accelerator (LPA). Using a jet-blade assembly, experiments systematically varied the shock injector profile, including shock angle, shock position, up-ramp width, and acceleration length. Our work demonstrates that beam energy, energy spread, and pointing can be controlled by adjusting these parameters. As a result, an electron beam that was highly tunable from 25 to 300 MeV with 8% energy spread (ΔEFWHM/E), 1.5 mrad divergence, and 0.35 mrad pointing fluctuation was produced. Particle-in-cell simulation characterized how variation in the shock angle and up-ramp width impacted the injection process. This highly controllable LPA represents a suitable, compact electron beam source for LPA applications such as Thomson sources and free-electron lasers.

  14. A study of the profile of the E3 electron trap in GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Kourkoutas, C.D. (TEI Athens (Greece). Dept. of Physics Chemistry and Material Technology); Kovacs, B.; Szentpali, B.; Somogyi, K. (Research Inst. for Technical Physics, Budapest (Hungary)); Euthymiou, P.C. (Athens Univ. (Greece)); Giakoumakis, G.E. (Ioannina Univ. (Greece). Dept. of Physics)

    1994-01-01

    Electron irradiation at room temperature introduces in GaAs a donor type electronic state Tx at 0.18 eV, which is associated with the E3 electron trap. The presence of Tx is observed at depths d > 1.5 [mu]m, which correspond to the limits of the depletion region under the highest applied reverse bias voltage, while the E3 trap concentration drops off into the same region. (author).

  15. A study of the profile of the E3 electron trap in GaAs

    International Nuclear Information System (INIS)

    Kourkoutas, C.D.; Euthymiou, P.C.; Giakoumakis, G.E.

    1994-01-01

    Electron irradiation at room temperature introduces in GaAs a donor type electronic state Tx at 0.18 eV, which is associated with the E3 electron trap. The presence of Tx is observed at depths d > 1.5 μm, which correspond to the limits of the depletion region under the highest applied reverse bias voltage, while the E3 trap concentration drops off into the same region. (author)

  16. Salmonellosis in Poland in 2013.

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Czarkowski, Mirosław P

    2015-01-01

    The purpose of the study was to evaluate the epidemiologic situation of salmonellosis in Poland in 2013 compared to previous years. The main source of data for this study are statistical overviews included in annual bulletin "Infectious Diseases in Poland in 2013", information from sanitary station laboratories as well as forms of outbreak investigations obtained from the sanitary stations. Information on deaths due to infectious and parasitic diseases registered in Poland in 2013 and earlier years is based on the data of the Department for Demographic Research of Central Statistical Office. For the purpose of surveillance cases were qualified according to the current definition. In Poland in 2013, a total of 7 578 cases of zoonotic salmonellosis were reported including 7 407 cases of intestinal salmonellosis and 171 of parenteral one. The incidence was 19,7/100 000. The criteria for a confirmed case were met by more than 96% of cases. The number of reported cases was lower than in previous year, reflecting the continued downward trend in the number of cases of salmonellosis in Poland. A very high percentage (more than 72%) of hospitalizations of people infected with zoonotic Salmonella continues. In the outbreaks the proportion of hospitalizations accounted only for 35% of all cases. Predominantly children below 5 years of age suffer from the illness. Salmonellosis was an indicated cause of death only in 10 of the cases. In 2013 179 outbreaks were reported, in which Salmonella was found to be the etiological agent. Majority of them were small household outbreaks and they cumulated for a total number of cases of 1 218. The most common species of Salmonella responsible for infection in Poland is S. Enteritidis. For many years, up to date a slight increase is observed in reported cases of the disease, but without known serotype of Salmonella. In 2013 it was 16% and (as in previous year) it was the highest in pomorskie voivodeship (58%). High percentage of

  17. High energy physics in Poland: the first 50 years

    International Nuclear Information System (INIS)

    Wroblewski, A.K.

    1993-01-01

    High energy physics in Poland started in 1933 when Stanislaw Ziemecki and Konstanty Narkiewicz-Jodko performed measurements of the latitude effect for cosmic rays. Subsequently, experiments with cosmic rays were carried out in balloon flights in a deep salt mine. Other Polish pioneers in this field were Ignacy Adamczewski, Czeslaw Bialobrzeski, Marian Miesowicz, Szczepan Szczeniowski and Jan Wesolowski. The ambitious 'Star of Poland' project of a stratospheric balloon flight to study cosmic rays up to an altitude of 30000 meters was not successful, first because of the fire accident and then of the outbreak of World War II. The destruction of laboratories during the war has slowed down the development of high energy physics in Poland by at least twelve years. However, in the late forties Marian Miesowicz started important cosmic ray studies in Cracow. In 1952 research using nuclear emulsions was initiated in Warsaw by Marian Danysz and Jerzy Pniewski. Two years later Marian Miesowicz and Jerzy Gierula began similar research in Cracow. In the late fifties Aleksander Zawadzki in Lodz started comprehensive studies of extensive air showers. Already in 1963 the number of experimental and theoretical papers on high energy physics published in Poland exceeded 100. Strong experimental and theoretical groups have been established in Cracow, Lodz and Warsaw. To supplement research with emulsions and bubble chambers the construction of electronic detectors for on-line experiments has been instituted. Thus, in the early eighties Polish high energy physicists were ready to participate in large projects such as DELPHI at LEP and ZEUS and H1 at HERA. The discovery of hypernuclei by Danysz and Pniewski in 1952 may be regarded as the most important achievement of physics in post-war Poland. (author). 108 refs, 26 figs, 1 tab

  18. Room temperature Compton profiles of conduction electrons in α-Ga ...

    Indian Academy of Sciences (India)

    Room temperature Compton profiles of momentum distribution of conduction electrons in -Ga metal are calculated in band model. For this purpose, the conduction electron wave functions are determined in a temperature-dependent non-local model potential. The profiles calculated along the crystallographic directions, ...

  19. Comparison of collisional radiative models for edge electron density reconstruction from Li I (2s-2p) emission profiles

    Energy Technology Data Exchange (ETDEWEB)

    Stoschus, H.; Hudson, B.; Munoz Burgos, J. M. [Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee 37831-0117 (United States); Thomas, D. M. [General Atomics, San Diego, California 92186-5608 (United States); Schweinzer, J. [Max-Planck-Institut fuer Plasmaphysik, Euratom Association, 85748 Garching (Germany)

    2012-10-15

    Four collisional radiative models (CRMs) for reconstruction of the edge electron density profile from the measured Li I (2s-2p) emission profile of an accelerated lithium beam are compared using experimental data from DIII-D. It is shown for both L- and H-mode plasmas that edge density profiles reconstructed with the CRMs DDD2, ABSOLUT, [Sasaki et al. Rev. Sci. Instrum. 64, 1699 (1993)] and a new model developed at DIII-D agree in a density scan from n{sub e}{sup ped}= (2.0-6.5) Multiplication-Sign 10{sup 19} m{sup -3} within 20%, 20%, <5%, and 40%, respectively, of the pedestal density measured with Thomson scattering. Profile shape and absolute density vary in a scan of the effective ion charge Z{sub eff}= 1-6 up to a factor of two but agree with Thomson data for Z{sub eff}= 1-2 within the error bars.

  20. Volatile aroma components and MS-based electronic nose profiles of dogfruit (Pithecellobium jiringa and stink bean (Parkia speciosa

    Directory of Open Access Journals (Sweden)

    Yonathan Asikin

    2018-01-01

    Full Text Available Dogfruit (Pithecellobium jiringa and stink bean (Parkia speciosa are two typical smelly legumes from Southeast Asia that are widely used in the cuisines of this region. Headspace/gas chromatography/flame ionization detection analysis and mass spectrometry (MS-based electronic nose techniques were applied to monitor ripening changes in the volatile flavor profiles of dogfruit and stink bean. Compositional analysis showed that the ripening process greatly influenced the composition and content of the volatile aroma profiles of these two smelly food materials, particularly their alcohol, aldehyde, and sulfur components. The quantity of predominant hexanal in stink bean significantly declined (P < 0.05 during the ripening process, whereas the major volatile components of dogfruit changed from 3-methylbutanal and methanol in the unripe state to acetaldehyde and ethanol in the ripe bean. Moreover, the amount of the typical volatile flavor compound 1,2,4-trithiolane significantly increased (P < 0.05 in both ripened dogfruit and stink bean from 1.70 and 0.93%, to relative amounts of 19.97 and 13.66%, respectively. MS-based nose profiling gave further detailed differentiation of the volatile profiles of dogfruit and stink bean of various ripening stages through multivariate statistical analysis, and provided discriminant ion masses, such as m/z 41, 43, 58, 78, and 124, as valuable “digital fingerprint” dataset that can be used for fast flavor monitoring of smelly food resources.

  1. OECD environmental performance reviews: Poland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    The review surveys the environmental conditions and environmental progress of Poland. It found that although most environmental targets were met Poland still faces challenges in complying with EU environmental laws. Topics covered are: environmental management; air, water and waste management; nature and biodiversity; economy and environment; sectoral integration: transport; and international co-operation. Top issues for conformity include pollution prevention, waste water treatment, waste management, biodiversity and landscape conservation, and climate protection. The review outlines 46 recommendations for the country to take in order to improve its environmental situation. Task areas include progressing toward meeting international environmental commitments and integrating environmental considerations in to economic policies through means such as improved rice signals, subsidy removal, and fiscal reforms.

  2. Asbestos manufacturing plants in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2014-06-01

    Full Text Available The unique set of physical and chemical properties of asbestos has led to its many industrial applications, such as roof coverings, textiles, rope, cord and yarn, paper, friction and composition materials, household product, acid-resistant filters, packing, insulation, and certain types of lagging, amongst others. In Poland asbestos-containing products were manufactured from raw materials imported mainly from the former Soviet Union, with production launched at the beginning of 20th century. According to Annex 4 to the Act of 19 June 1997 on the prohibition of the use of asbestos-containing products, there were 28 asbestos manufacturing plants in Poland located in 11 provinces throughout the country. The current survey was undertaken to enable asbestos manufacturing plants to be arranged, described and divided in order to contribute to further surveys.

  3. Meningitis and encephalitis in Poland in 2014

    Science.gov (United States)

    Paradowska-Stankiewicz, Iwona; Piotrowska, Anna

    The aim of this study was to assess the epidemiology of meningitis and/or encephalitis in Poland in 2014. In the last three years in Poland, about 3000 cases of meningitis and/or encephalitis of viral or bacterial etiology were recorded annually. Assessment of the epidemiological situation of meningitis and/or encephalitis in Poland in 2014, was based on the results of the analysis of epidemiological reports sent to the NIZP-PZH by the Regional Sanitary-Epidemiological Stations published in the annual bulletin “Infectious diseases and poisonings in Poland in 2014” and “Preventive immunizations in Poland in 2014”. In 2014 in Poland 3488 cases of bacterial meningitis and/or encephalitis were recorded. Almost 61.3% of these were viral infections. In 2014, in comparison to 2013, a 1.1% increase in the number of cases of meningitis and/or encephalitis was observed and 91% with viral etiology.

  4. Measurement of lower-hybrid-driven current profile by Abel inversion of electron-cyclotron wave transmission spectra

    International Nuclear Information System (INIS)

    Fidone, I.; Giruzzi, G.; Caron, X.; Meyer, R.L.

    1991-01-01

    A method for measuring the radial profile of the lower-hybrid-driven current in a low-density tokamak plasma using electron-cyclotron wave attenuation is discussed. This diagnostic scheme is reminiscent of the transmission interferometry approach, commonly used in tokamaks to measure the plasma density, but now the wave amplitude instead of the phase is measured. Wave attenuation of the ordinary mode at ω p much-lt ω c along vertical chords is measured; at these frequencies, the waves are absorbed by the superthermal tail sustained by lower-hybrid waves and the local wave absorption coefficient is proportional to the noninductive current density. The radial profile of this current is obtained from Abel inversion. An application to the Tore Supra tokamak is presented

  5. Measurement of current drive profile using electron cyclotron wave attenuation near the O-mode cut-off

    International Nuclear Information System (INIS)

    Fidone, I.

    1991-01-01

    A method for determining the radial profile of the lower-hybrid current drive in tokamaks uing electron-cyclotron attenuation of the O-mode for frequencies ω near the cut-off frequency is discussed. The basic idea is that for a given wave frequency, the cut-off plays the role of a spatial filter selecting a variable portion of the non-inductive current. It is shown that the incremental attenuation resulting from a small increase of ω displays specific features related to the current density near the cut-off point. Using the relation between the wave damping and the current density it is possible to determine the radial profile of the current drive from the wave attenuation measurements. A numerical application is also presented for plasma parameters in the reactor regime

  6. Efficient analysis of mode profiles in elliptical microcavity using dynamic-thermal electron-quantum medium FDTD method.

    Science.gov (United States)

    Khoo, E H; Ahmed, I; Goh, R S M; Lee, K H; Hung, T G G; Li, E P

    2013-03-11

    The dynamic-thermal electron-quantum medium finite-difference time-domain (DTEQM-FDTD) method is used for efficient analysis of mode profile in elliptical microcavity. The resonance peak of the elliptical microcavity is studied by varying the length ratio. It is observed that at some length ratios, cavity mode is excited instead of whispering gallery mode. This depicts that mode profiles are length ratio dependent. Through the implementation of the DTEQM-FDTD on graphic processing unit (GPU), the simulation time is reduced by 300 times as compared to the CPU. This leads to an efficient optimization approach to design microcavity lasers for wide range of applications in photonic integrated circuits.

  7. Generation and characterization of electron bunches with ramped current profiles in a dual-frequency superconducting linear accelerator.

    Science.gov (United States)

    Piot, P; Behrens, C; Gerth, C; Dohlus, M; Lemery, F; Mihalcea, D; Stoltz, P; Vogt, M

    2012-01-20

    We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radio frequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced ~700-MeV bunches have peak currents of the order of a kilo-Ampère. Data taken for various accelerator settings demonstrate the versatility of the method and, in particular, its ability to produce current profiles that have a quasilinear dependency on the longitudinal (temporal) coordinate. The measured bunch parameters are shown, via numerical simulations, to produce gigavolt-per-meter peak accelerating electric fields with transformer ratios larger than 2 in dielectric-lined waveguides. © 2012 American Physical Society

  8. [Measles in Poland in 2003].

    Science.gov (United States)

    Stefanoff, Paweł; Czarkowski, Mirosław P

    2005-01-01

    In Poland 48 measles cases were registered in 2003 (0.13 per 100,000 population)--of which 65% were cases imported from Chechnya and Afghanistan. Measles outbreaks occurred in 3 centers for immigrants. In total, 31 cases were reported, of which 96.8% were unvaccinated, and 93.5% were under 15 years of age. Of 17 local cases, 5 (29.4%) cases occurred in unvaccinated persons, 3 (17.6%) in persons vaccinated with one dose and 7 (41.2%) in those vaccinated with two doses of measles vaccine (administered at the age of 13-15 months and 7 years). Among 12 vaccinated cases only one 2-year old child was recently vaccinated. The remaining cases were in the 3-7 and 10-24 age ranges. The most affected were infants (incidence 0.57 per 100,000), 1-year old (0.28) and 2-year old children (incidence 0.27). Cases among adolescents and adults over 15 years of age increased from 23.5% in 2002 to 47.1% in 2003. The increasing age of locally-acquired cases, together with constantly high immunization coverage indicates high effectiveness of vaccinations in Poland. Out of all reported cases 13 (38%) were hospitalized. There were no deaths due to measles in Poland in 2003. Poland participates in the WHO Measles Elimination Strategy. Presently, the most important is the maintenance of a sensitive and timely surveillance of measles and measles-compatible cases, with serologic confirmation of one rash-like illness per 100 000 population. The performance of the surveillance system is insufficient with only 55 measles-compatible cases reported in 2003 (15% of expected reports). Serologic confirmation of cases was also insufficient, with 22 cases (40.0%) confirmed by IgM ELISA test. These results indicate the need to maintain the high immunisation coverage and improve measles surveillance system.

  9. Silicon diodes as an alternative to diamond detectors for depth dose curves and profile measurements of photon and electron radiation

    International Nuclear Information System (INIS)

    Scherf, Christian; Moog, Jussi; Licher, Joerg; Kara, Eugen; Roedel, Claus; Ramm, Ulla; Peter, Christiane; Zink, Klemens

    2009-01-01

    Background: Depth dose curves and lateral dose profiles should correspond to relative dose to water in any measured point, what can be more or less satisfied with different detectors. Diamond as detector material has similar dosimetric properties like water. Silicon diodes and ionization chambers are also commonly used to acquire dose profiles. Material and Methods: The authors compared dose profiles measured in an MP3 water phantom with a diamond detector 60003, unshielded and shielded silicon diodes 60008 and 60012 and a 0.125-cm 3 thimble chamber 233642 (PTW, Freiburg, Germany) for 6- and 25-MV photons. Electron beams of 6, 12 and 18 MeV were investigated with the diamond detector, the unshielded diode and a Markus chamber 23343. Results: The unshielded diode revealed relative dose differences at the water surface below +10% for 6-MV and +4% for 25-MV photons compared to the diamond data. These values decreased to less than 1% within the first millimeters of water depth. The shielded diode was only required to obtain correct data of the fall-off zones for photon beams larger than 10 x 10 cm 2 because of important contributions of low-energy scattered photons. For electron radiation the largest relative dose difference of -2% was observed with the unshielded silicon diode for 6 MeV within the build-up zone. Spatial resolutions were always best with the small voluminous silicon diodes. Conclusion: Relative dose profiles obtained with the two silicon diodes have the same degree of accuracy as with the diamond detector. (orig.)

  10. Mission-profile based multi-objective optimization of power electronics converter for wind turbines

    DEFF Research Database (Denmark)

    Gohil, Ghanshyamsinh; Teodorescu, Remus; Kerekes, Tamas

    2017-01-01

    -objective optimization approach for designing power converter is presented. The objective is to minimize the energy loss for a given load profile as against the conventional approach of minimizing power loss at specific loading conditions. The proposed approach is illustrated by designing a grid-side power converter...

  11. Room temperature Compton profiles of conduction electrons in α-Ga ...

    Indian Academy of Sciences (India)

    B P PANDA and N C MOHAPATRA*. Department of Physics, Chikiti Mahavidyalaya, Chikiti 761 010, India. £Department of Physics, Berhampur University, Berhampur 760 007, India. Email: ncmphy123@hotmail.com. MS received 18 January 2003; accepted 21 June 2003. Abstract. Room temperature Compton profiles of ...

  12. Z-Slicer: A Scheme for Shaping the Electron Beam Profile in a Linac

    Energy Technology Data Exchange (ETDEWEB)

    Thangaraj, J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Crawford, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Broemmelsiek, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Thurman-Keup, R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Baffes, C. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Wortley, W. [Univ. of Rochester, NY (United States)

    2014-01-01

    A train of short bunches ( 100 fs) are at a premium at accelerator facilities and their applications include terahertz (THz) generation, short bunch diagnostics, advanced accelerator R&D, etc. In this work we report on the design and simulation of an experiment involving a 20 MeV electron beam, that will be intercepted by a set of metallic slits inside a bunch compressor. After the mask, some electrons are scattered while other pass through unaffected. After exiting the bunch compressor, those electrons that were not affected by the slits will appear as short electron bunches. The key advantage of our scheme is its simplicity, tunability and low cost. The scheme does not require any additional hardware such as lasers, undulator, or transverse deflecting cavity. The tuning variable is only the RF-chirp. The detection of the bunching requires just a skew quad in the chicane and a transverse screen downstream.

  13. Mitigation of the electron-cloud effect in the PSR and SNS proton storage rings by tailoring the bunch profile

    International Nuclear Information System (INIS)

    Pivi, M.; Furman, M.A.

    2003-01-01

    For the storage ring of the Spallation Neutron Source(SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electroncloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure

  14. Determination of dislocation density by electron backscatter diffraction and X-ray line profile analysis in ferrous lath martensite

    International Nuclear Information System (INIS)

    Berecz, Tibor; Jenei, Péter; Csóré, András; Lábár, János; Gubicza, Jenő

    2016-01-01

    The microstructure and the dislocation density in as-quenched ferrous lath martensite were studied by different methods. The blocks, packets and variants formed due to martensitic transformation were identified and their sizes were determined by electron backscatter diffraction (EBSD). Concomitant transmission electron microscopy (TEM) investigation revealed that the laths contain subgrains with the size between 50 and 100 nm. A novel evaluation procedure of EBSD images was elaborated for the determination of the density and the space distribution of geometrically necessary dislocations from the misorientation distribution. The total dislocation density obtained by X-ray diffraction line profile analysis was in good agreement with the value determined by EBSD, indicating that the majority of dislocations formed due to martensitic transformation during quenching are geometrically necessary dislocations.

  15. Molecular dynamics with phase-shift-based electronic stopping for calibration of ion implantation profiles in crystalline silicon

    International Nuclear Information System (INIS)

    Chan, H.Y.; Nordlund, K.; Gossmann, H.-J.L.; Harris, M.; Montgomery, N.J.; Mulcahy, C.P.A.; Biswas, S.; Srinivasan, M.P.; Benistant, F.; Ng, C.M.; Chan, Lap

    2006-01-01

    Prediction of the final dopant positions after ion implantation has always been strongly influenced by the choice of stopping models. A molecular dynamics (MD) method is used in this work; the nuclear stopping is treated by accurate pair potentials calculated by density functional theory (DFT). The slowing down due to collisions with electrons will be described by both a non-local semi-empirical model and a local model based on Fermi level phase shift factors. Comparisons with experimental data using both models show that a local pair-specific electronic stopping model is essential in accurately predicting range profiles for any element even at low implant energies where nuclear effects are dominant

  16. [Malaria in Poland in 2010].

    Science.gov (United States)

    Stepień, Małgorzata

    2012-01-01

    The objective of this study was to describe the epidemiology of imported malaria in Poland in 2010 in comparison to previous years. The study included malaria cases that were collected and registered by the State Sanitary Inspection in 2010 in Poland. Data reported was verified, processed and published by National Institute of Public Health - National Institute of Hygiene. All cases were laboratory confirmed by blood film, polymerase chain reaction or rapid diagnostic tests outlined by the EU case definition. Differences in the distribution of demographic, parasitological and clinical characteristics, and incidence were analyzed. In 2010, a total of 35 confirmed malaria cases were notified in Poland, 13 more than 2009. All cases were imported, 49% from Africa, including 1 case with relapsing malaria caused by P. vivax and 2 cases of recrudescence falciparum malaria following failure of treatment. The number of cases acquired in Asia (37% of the total), mainly from India and Indonesia, was significantly higher than observed in previous years. Among cases with species-specific diagnosis 19 (63%) were caused by P. falciparum, 9 (30%) by P. vivax, one by P. ovale and one by P. malariae. The median age of all cases was 42 years (range 9 months to 71 years), males comprised 69% of patients, females 31%, three patients were Indian citizens temporarily in Poland. Common reasons for travel to endemic countries were tourism (57%), work-related visits (37%), one person visited family and in one case the reason for travel was unknown. Sixteen travelers took chemoprophylaxis, but only three of them appropriately (adherence to the recommended drug regimen, continuation upon return and use of appropriate medicines). In 2010, there were no deaths due to malaria and clinical course of disease was severe in 7 cases. When compared with 2009, there was a marked increase in the number of imported malaria cases in Poland, however the total number of notified cases remained low. Serious

  17. Reduced model prediction of electron temperature profiles in microtearing-dominated National Spherical Torus eXperiment plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Kaye, S. M., E-mail: skaye@pppl.gov; Guttenfelder, W.; Bell, R. E.; Gerhardt, S. P.; LeBlanc, B. P.; Maingi, R. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)

    2014-08-15

    A representative H-mode discharge from the National Spherical Torus eXperiment is studied in detail to utilize it as a basis for a time-evolving prediction of the electron temperature profile using an appropriate reduced transport model. The time evolution of characteristic plasma variables such as β{sub e}, ν{sub e}{sup ∗}, the MHD α parameter, and the gradient scale lengths of T{sub e}, T{sub i}, and n{sub e} were examined as a prelude to performing linear gyrokinetic calculations to determine the fastest growing micro instability at various times and locations throughout the discharge. The inferences from the parameter evolutions and the linear stability calculations were consistent. Early in the discharge, when β{sub e} and ν{sub e}{sup ∗} were relatively low, ballooning parity modes were dominant. As time progressed and both β{sub e} and ν{sub e}{sup ∗} increased, microtearing became the dominant low-k{sub θ} mode, especially in the outer half of the plasma. There are instances in time and radius, however, where other modes, at higher-k{sub θ}, may, in addition to microtearing, be important for driving electron transport. Given these results, the Rebut-Lallia-Watkins (RLW) electron thermal diffusivity model, which is based on microtearing-induced transport, was used to predict the time-evolving electron temperature across most of the profile. The results indicate that RLW does a good job of predicting T{sub e} for times and locations where microtearing was determined to be important, but not as well when microtearing was predicted to be stable or subdominant.

  18. Spatial profiles of electron and metastable atom densities in positive polarity fast ionization waves sustained in helium

    International Nuclear Information System (INIS)

    Weatherford, Brandon R.; Barnat, E. V.; Xiong, Zhongmin; Kushner, Mark J.

    2014-01-01

    Fast ionization waves (FIWs), often generated with high voltage pulses over nanosecond timescales, are able to produce large volumes of ions and excited states at moderate pressures. The mechanisms of FIW propagation were experimentally and computationally investigated to provide insights into the manner in which these large volumes are excited. The two-dimensional structure of electron and metastable densities produced by short-pulse FIWs sustained in helium were measured using laser-induced fluorescence and laser collision-induced fluorescence diagnostics for times of 100–120 ns after the pulse, as the pressure was varied from 1 to 20 Torr. A trend of center-peaked to volume-filling to wall-peaked electron density profiles was observed as the pressure was increased. Instantaneous FIW velocities, obtained from plasma-induced emission, ranged from 0.1 to 3 × 10 9  cm s −1 , depending on distance from the high voltage electrode and pressure. Predictions from two-dimensional modeling of the propagation of a single FIW correlated well with the experimental trends in electron density profiles and wave velocity. Results from the model show that the maximum ionization rate occurs in the wavefront, and the discharge continues to propagate forward after the removal of high voltage from the powered electrode due to the potential energy stored in the space charge. As the pressure is varied, the radial distribution of the ionization rate is shaped by changes in the electron mean free path, and subsequent localized electric field enhancement at the walls or on the centerline of the discharge.

  19. Determination of the time evolution of the electron-temperature profile of reactor-like plasmas from the measurement of blackbody electron-cyclotron emission

    International Nuclear Information System (INIS)

    Efthimion, P.C.; Arunasalam, V.; Bitzer, R.A.; Hosea, J.C.

    1982-04-01

    Plasma characteristics (i.e., n/sub e/ greater than or equal to 1 x 10 13 cm -3 , T/sub e/ greater than or equal to 10 7 0 K, B/sub psi/ greater than or equal to 20 kG) in present and future magnetically confined plasma devices, e.g., Princeton Large Torus (PLT) and Tokamak Fusion Test Reactor (TFTR), meet the conditions for blackbody emission near the electron cyclotron frequency and at few harmonics. These conditions, derived from the hot plasma dielectric tensor, have been verified by propagation experiments on PLT and the Princeton Model-C Stellarator. Blackbody emission near the fundamental electron cyclotron frequency and the second harmonic have been observed in PLT and is routinely measured to ascertain the time evolution of the electron temperature profile. These measurements are especially valuable in the study of auxiliary heating of tokamak plasma. Measurement and calibration techniques will also be discussed with special emphasis on our fast-scanning heterodyne receiver concept

  20. Heterodyne radiometer for the measurement of the electron temperature profile on TdeV

    International Nuclear Information System (INIS)

    Pinsonneault, D.; Quirion, B.; Hubbard, A.; Glaude, V.; Legros, C.

    1993-01-01

    In the following sections an overview of the basic physical considerations are presented. We then briefly describe the instrument and present the design and construction of the two calibration standards in more detail. We also discuss the calibration procedures using these sources which permit the derivation of T e independent of the other diagnostics. Finally, a comparison of T e (R) profiles obtained with the three measurement system will be presented. (orig.)

  1. Antipsychotic treatment dosing profile in patients with schizophrenia evaluated with electronic monitoring (MEMS®).

    Science.gov (United States)

    Acosta, Francisco J; Ramallo-Fariña, Yolanda; Bosch, Esperanza; Mayans, Teresa; Rodríguez, Carlos J; Caravaca, Ana

    2013-05-01

    Although the Medication Event Monitoring System (MEMS®) device offers accurate information on treatment dosing profile, such profile has never been studied in patients with schizophrenia. Enhancing our knowledge on this issue would help in developing intervention strategies to improve adherence to antipsychotic treatment in these patients. 74 outpatients with schizophrenia were monitored with the MEMS device for a 3-month period, for evaluation of antipsychotic treatment dosing profile, possible influence of medication schedule-related variables, adherence to treatment--considering dose intake within prescribed timeframes--and possible Hawthorne's effect of using the MEMS device. Dose-omission gaps occurred in 18.7% of monitoring days, most frequently during weekends, almost significantly. Almost one-third of prescribed doses were taken out of prescribed time. Neither the prescribed number of daily doses nor the indicated time of the day for dose intake (breakfast, dinner), were associated with correct antipsychotic dosing. Excess-dose was rare in general, and more frequent out of prescribed dose timeframe. No Hawthorne's effect was found for the MEMS device. Adherence reached only 35% according to a definition that included dose intake within prescribed timeframes. Antipsychotic treatment dosing was considerably irregular among patients with schizophrenia. Strategies to reduce dose-omission gaps and increase dosing within prescribed timeframes seem to be necessary. Gaining knowledge on precise oral antipsychotic dosing profiles or the influence of schedule-related variables may be useful to design strategies towards enhancing adherence. There appears to be no Hawthorne's effect associated with the use of MEMS devices in outpatients with schizophrenia. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Elemental depth profiles and plasma etching rates of positive-tone electron beam resists after sequential infiltration synthesis of alumina

    Science.gov (United States)

    Ozaki, Yuki; Ito, Shunya; Hiroshiba, Nobuya; Nakamura, Takahiro; Nakagawa, Masaru

    2018-06-01

    By scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM–EDS), we investigated the elemental depth profiles of organic electron beam resist films after the sequential infiltration synthesis (SIS) of inorganic alumina. Although a 40-nm-thick poly(methyl methacrylate) (PMMA) film was entirely hybridized with alumina, an uneven distribution was observed near the interface between the substrate and the resist as well as near the resist surface. The uneven distribution was observed around the center of a 100-nm-thick PMMA film. The thicknesses of the PMMA and CSAR62 resist films decreased almost linearly as functions of plasma etching period. The comparison of etching rate among oxygen reactive ion etching, C3F8 reactive ion beam etching (RIBE), and Ar ion beam milling suggested that the SIS treatment enhanced the etching resistance of the electron beam resists to chemical reactions rather than to ion collisions. We proposed oxygen- and Ar-assisted C3F8 RIBE for the fabrication of silica imprint molds by electron beam lithography.

  3. A New Inversion Routine to Produce Vertical Electron-Density Profiles from Ionospheric Topside-Sounder Data

    Science.gov (United States)

    Wang, Yongli; Benson, Robert F.

    2011-01-01

    Two software applications have been produced specifically for the analysis of some million digital topside ionograms produced by a recent analog-to-digital conversion effort of selected analog telemetry tapes from the Alouette-2, ISIS-1 and ISIS-2 satellites. One, TOPIST (TOPside Ionogram Scalar with True-height algorithm) from the University of Massachusetts Lowell, is designed for the automatic identification of the topside-ionogram ionospheric-reflection traces and their inversion into vertical electron-density profiles Ne(h). TOPIST also has the capability of manual intervention. The other application, from the Goddard Space Flight Center based on the FORTRAN code of John E. Jackson from the 1960s, is designed as an IDL-based interactive program for the scaling of selected digital topside-sounder ionograms. The Jackson code has also been modified, with some effort, so as to run on modern computers. This modification was motivated by the need to scale selected ionograms from the millions of Alouette/ISIS topside-sounder ionograms that only exist on 35-mm film. During this modification, it became evident that it would be more efficient to design a new code, based on the capabilities of present-day computers, than to continue to modify the old code. Such a new code has been produced and here we will describe its capabilities and compare Ne(h) profiles produced from it with those produced by the Jackson code. The concept of the new code is to assume an initial Ne(h) and derive a final Ne(h) through an iteration process that makes the resulting apparent-height profile fir the scaled values within a certain error range. The new code can be used on the X-, O-, and Z-mode traces. It does not assume any predefined profile shape between two contiguous points, like the exponential rule used in Jackson s program. Instead, Monotone Piecewise Cubic Interpolation is applied in the global profile to keep the monotone nature of the profile, which also ensures better smoothness

  4. Electronic band gap and transport in graphene superlattice with a Gaussian profile potential voltage

    International Nuclear Information System (INIS)

    Zhang Yu-Ping; Yin Yi-Heng; Lü Huan-Huan; Zhang Hui-Yun

    2014-01-01

    We study the electronic properties for the graphene-based one-dimensional superlattices, whose potential voltages vary according to the envelope of a Gaussian function. It is found that an unusual Dirac point exists and its location is exactly associated with a zero-averaged wave number (zero-k-bar ) gap. This zero-k-bar gap is less sensitive to incident angle and lattice constants, properties opposing those of Bragg gap. The defect mode appearing inside the zero-k-bar gap has an effect on transmission, conductance, and shot noise, which will be useful for further investigation. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  5. Measurements of Electron Density Profiles of Plasmas Produced by Nike KrF Laser for Laser Plasma Instability (LPI) Research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Obenschain, S. P.; Schmitt, A. J.; Kehne, D. M.; Karasik, M.; Chan, L.-Y.; Serlin, V.; Phillips, L.

    2013-10-01

    Knowing spatial profiles of electron density (ne) in the underdense coronal region (n Nike LPI experiment, a side-on grid imaging refractometer (GIR) was deployed for measuring the underdense plasma profiles. Plasmas were produced from flat CH targets illuminated by Nike KrF laser with total energies up to 1 kJ of 0.5 ~ 1 nsec FWHM pulses. The GIR resolved ne up to 3 ×1021 /cm3 in space taking 2D snapshot images of probe laser (λ = 263 nm, Δt = 10 ps) beamlets (50 μm spacing) refracted by the plasma at a selected time during the laser illumination. The individual beamlet transmittances were also measured for Te estimation. Time-resolved spectrometers with an absolute-intensity-calibrated photodiode array and a streak camera simultaneously detected light emission from the plasma in spectral ranges relevant to Raman (SRS) and two plasmon decay instabilities. The measured spatial profiles are compared with simulation results from the FAST3D radiation hydrocode and their effects on the LPI observations are investigated. Work supported by DoE/NNSA and performed at Naval Research Laboratory.

  6. Improving electronic customers' profile in recommender systems using data mining techniques

    Directory of Open Access Journals (Sweden)

    Mohammad Julashokri

    2011-10-01

    Full Text Available Recommender systems are tools for realization one to one marketing. Recommender systems are systems, which attract, retain, and develop customers. Recommender systems use several ways to make recommendations. Two ways are using more than the others: collaborative filtering and content-based filtering. In this study, a recommender system model based on collaborative filtering has proposed. Proposed model was endeavored to improve the customer profile in collaborative systems to enhance the recommender system efficiency. This improvement was done using time context and group preferences. Experimental results show that the proposed model has a better recommendation performance than existing models.

  7. Improving the Automatic Inversion of Digital Alouette/ISIS Ionogram Reflection Traces into Topside Electron Density Profiles

    Science.gov (United States)

    Benson, Robert F.; Truhlik, Vladimir; Huang, Xueqin; Wang, Yongli; Bilitza, Dieter

    2012-01-01

    The topside sounders of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35 mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the Topside Ionogram Scalar With True-Height (TOPIST) algorithm, has been produced and used for the automatic inversion of the ionogram reflection traces on more than 100,000 ISIS-2 digital topside ionograms into topside vertical electron density profiles Ne(h). Here we present some topside ionospheric solar cycle variations deduced from the TOPIST database to illustrate the scientific benefit of improving and expanding the topside ionospheric Ne(h) database. The profile improvements will be based on improvements in the TOPIST software motivated by direct comparisons between TOPIST profiles and profiles produced by manual scaling in the early days of the ISIS program. The database expansion will be based on new software designed to overcome limitations in the original digital topside ionogram database caused by difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame sync pulse and/or the frequency markers. This improved and expanded TOPIST topside Ne(h) database will greatly enhance investigations into both short- and long-term ionospheric changes, e.g., the observed topside ionospheric responses to magnetic storms, induced by interplanetary magnetic clouds, and solar cycle variations, respectively.

  8. The concentration of retail in Poland

    Directory of Open Access Journals (Sweden)

    Michał Gazdecki

    2010-01-01

    Full Text Available The article discusses the processes of concentration taking place in retail in Poland. In spite of strong concentration processes, which took place after 2000, Poland still remains a country of dispersed retail structure. In the nearest years we can expect capital concentration (mainly takeovers in modern trade and contract concentration (for example, merchants’ societies in traditional trade.

  9. Poland's syndrome: radiologic findings

    Energy Technology Data Exchange (ETDEWEB)

    Bazzi Junior, Joao Lourenco, E-mail: joaobazzijr@gmail.com [Clinica Via Imagem, Xanxere, SC (Brazil); Matta, Eduardo Simoes da [Pro Circulacao - Clinica de Angiologia, Cirurgia Vascular e Ecografia Vascular, Xanxere, SC (Brazil); De Bortoli, Luciano [Materclinica Materno Infantil, Xanxere, SC (Brazil); De Bortoli, Felipe Raasch [Universidade Catolica de Pelotas (UCPel), Pelotas, RS (Brazil). Fac. of Medicine

    2012-05-15

    Poland's syndrome is a rare non-inherited congenital anomaly. The authors describe the classic radiologic findings of Poland's syndrome by reporting the case of a male four-year old patient with asymmetry of hands and chest, illustrating the fundamental imaging criteria for a conclusive diagnosis. (author)

  10. Social Inclusion of Foreigners in Poland

    Science.gov (United States)

    Sowa-Behtane, Ewa

    2016-01-01

    Poland has a relatively short history of immigration compared to other member states of the European Union. However, in recent decades, the number of foreigners in Poland has increased significantly. Intercultural relations may take the form of hostility, conflict, antagonism, segregation, separation, neutral co-presence, partial social…

  11. Income and its distribution in preindustrial Poland

    NARCIS (Netherlands)

    Malinowski, Mikołaj; van Zanden, Jan Luiten

    This article presents per capita GDP and income distribution estimates for preindustrial Poland. It is based on a social table for the Voivodeship of Cracow in 1578. Our evidence indicates that income in Poland was distributed more equally than in contemporary Holland. However, the extraction rate

  12. Radiation atlas of Poland 1997

    International Nuclear Information System (INIS)

    Jagielak, J.; Biernacka, M.; Henschke, J.; Sosinska, A.

    1998-01-01

    The Central Laboratory for Radiological Protection with support and commitment of the State Inspectorate for Environmental Protection carried out necessary surveys and collected materials which allowed to elaborate present edition of the Radiation Atlas of Poland (1997). Data presented in the form of maps provide readers with the information on the 137 Cs and natural radionuclides concentration in the environment. The average annual doses to the public from various sources of the ionizing radiation, e.g. doses from X-ray apparatus and radionuclides used in medical diagnostics or from the internal contamination of the human organism are also presented in the publication

  13. Positron depth profiling of the structural and electronic structure transformations of hydrogenated Mg-based thin films

    Science.gov (United States)

    Eijt, S. W. H.; Kind, R.; Singh, S.; Schut, H.; Legerstee, W. J.; Hendrikx, R. W. A.; Svetchnikov, V. L.; Westerwaal, R. J.; Dam, B.

    2009-02-01

    We report positron depth-profiling studies on the hydrogen sorption behavior and phase evolution of Mg-based thin films. We show that the main changes in the depth profiles resulting from the hydrogenation to the respective metal hydrides are related to a clear broadening in the observed electron momentum densities in both Mg and Mg2Ni films. This shows that positron annihilation methods are capable of monitoring these metal-to-insulator transitions, which form the basis for important applications of these types of films in switchable mirror devices and hydrogen sensors in a depth-sensitive manner. Besides, some of the positrons trap at the boundaries of columnar grains in the otherwise nearly vacancy-free Mg films. The combination of positron annihilation and x-ray diffraction further shows that hydrogen loading at elevated temperatures, in the range of 480-600 K, leads to a clear Pd-Mg alloy formation of the Pd catalyst cap layer. At the highest temperatures, the hydrogenation induces a partial delamination of the ˜5 nm thin capping layer, as sensitively monitored by positron depth profiling of the fraction of ortho-positronium formed at interface with the cap layer. The delamination effectively blocks the hydrogen cycling. In Mg-Si bilayers, we investigated the reactivity upon hydrogen loading and heat treatments near 480 K, which shows that Mg2Si formation is fast relative to MgH2. The combination of positron depth profiling and transmission electron microscopy shows that hydrogenation promotes a complete conversion to Mg2Si for this destabilized metal hydride system, while a partially unreacted, Mg-rich amorphous prelayer remains on top of Mg2Si after a single heat treatment in an inert gas environment. Thin film studies indicate that the difficulty of rehydrogenation of Mg2Si is not primarily the result from slow hydrogen dissociation at surfaces, but is likely hindered by the presence of a barrier for removal of Mg from the readily formed Mg2Si.

  14. Study of profile control and suprathermal electron production with lower hybrid waves

    International Nuclear Information System (INIS)

    Soeldner, F.X.; Brambilla, M.; Leuterer, F.; Muenich, M.

    1986-05-01

    In this study the coupling of LH waves to suprathermal electrons, the LH current drive efficiency and the mechanism for sawtooth stabilisation will be discussed. A wide data base has been obtained by the LH experiments on Alcator C, ASDEX, FT; JFT-2M, JIPPT-IIU, Petula, PLT, Versator, WT II during the last years and important aspects as the scaling of global current drive efficiency are satisfactorily described by theory. We mainly rely here on experimental results from ASDEX and comparison with theoretical calculations by Fisch and Karney. (orig.)

  15. Indoor radon concentration in Poland

    International Nuclear Information System (INIS)

    Mamont-Ciesla, K.; Jagielak, J.; Rosinski, S.W.; Sosinka, A.; Bysiek, M.; Henschke, J.

    1996-01-01

    Preliminary survey of Rn concentration indoors by means of track detectors and y-ray dose rate with the use of TLD in almost 500 homes in selected areas of Poland was performed in the late 1980s. It was concluded that radon contributes 1.16 mSv i.e. about 46 per cent of the total natural environment ionizing radiation dose to the Polish population. Comparison of the average radon concentrations in 4 seasons of a year and in 3 groups of buildings: masonry, concrete and wood, revealed that the ground beneath the building structure is likely the dominant source of radon indoors. Since the National Atomic Energy Agency in its regulations of 1988-03-31 set up the permissible limit of the equilibrium equivalent concentration of radon in new buildings (equal 100 Bq/m3), the nation-scale survey project for radon in buildings has been undertaken. These regulations were supposed to take effect in 1995-01-01. The project has 3 objectives: to estimate the radiation exposure due to radon daughters received by Polish population to identify radon-prone areas in Poland to investigate dependence of the indoor radon concentrations on such parameters as: type of construction material, presence (or absence) of cellar under the building, number of floor

  16. Pavement noise measurements in Poland

    Science.gov (United States)

    Zofka, Ewa; Zofka, Adam; Mechowski, Tomasz

    2017-09-01

    The objective of this study is to investigate the feasibility of the On-Board Sound Intensity (OBSI) system to measure tire-pavement noise in Poland. In general, sources of noise emitted by the modern vehicles are the propulsion noise, aerodynamic resistance and noise generated at the tire-pavement interface. In order to capture tire-pavement noise, the OBSI system uses a noise intensity probe installed in the close proximity of that interface. In this study, OBSI measurements were performed at different types of pavement surfaces such as stone mastic asphalt (SMA), regular asphalt concrete (HMA) as well as Portland cement concrete (PCC). The influence of several necessary OBSI measurement conditions were recognized as: testing speed, air temperature, tire pressure and tire type. The results of this study demonstrate that the OBSI system is a viable and robust tool that can be used for the quality evaluation of newly built asphalt pavements in Poland. It can be also applied to generate reliable input parameters for the noise propagation models that are used to assess the environmental impact of new and existing highway corridors.

  17. [Measles in Poland in 2004].

    Science.gov (United States)

    Czarkowski, Mirosław P; Kondej, Barbara; Paweł, Stefanoff

    2006-01-01

    In Poland 11 measles cases were registered in 2004 (0.03 per 100,000 population), of which 3 were cases imported from Chechnya. Of 8 local cases, 3 cases occurred in unvaccinated persons, 2 in persons vaccinated with one dose and 3 in vaccinated with two doses of measles vaccine (administered at the age of 13-15 months and 7 years). The most affected age groups were 1-year old children (0.29 per 100,000 population) and 6-year olds (0.25). Out of 11 reported cases 2 were hospitalized. There were no deaths attributed to measles. Poland participates in the WHO Measles Elimination Strategy. Presently, the most important is the maintenance of a sensitive and timely surveillance of measles and measles-compatible cases, with serologic testing of one suspect case per 100,000 population. The performance of the surveillance system was insufficient with only 44 measles-compatible cases reported in 2004 (12% of expected reports). Serologic confirmation of cases was also insufficient, with 5 cases confirmed in WHO accredited laboratory. These results indicate the need to maintain the high immunisation coverage and improve measles surveillance system.

  18. [Malaria in Poland in 2009].

    Science.gov (United States)

    Stepiń, Małgorzata

    2011-01-01

    In Poland in 2009 were reported 22 malaria cases confirmed according to the EU case definition for the purposes of routine surveillance system. All of them were imported, including 1 case of recrudescence, 86% from Africa. In 18 cases P falciparum etiology was confirmed and in 2--P vivax, in 1--P ovale and 1 P malariae. Most cases occurred in the age group 21-40 years, there were 21 cases in males and 1 in female. Common reasons for travel to endemic countries were work-related visits (14 cases) and tourism (6 cases), one person who visited the family and in one case unknown reason for travel. Three persons used chemoprophylaxis during their travel but only one of them appropriately, relevant information was missing in 5 cases. Clinical course was severe in 7 cases of P falciparum malaria and medium-severe in one case. In 2009, there were no malaria deaths in Poland. Education on the prevention of malaria and pretravel health advising is still greatly needed.

  19. [Malaria in Poland in 2007].

    Science.gov (United States)

    Rosińska, Magdalena

    2009-01-01

    In Poland in 2007 there were 11 malaria cases confirmed according to the European Union cases definition reported through the routine surveillance system. All of them were imported, 82% from Africa, including 2 cases of relapse. Invasion with Plasmodium falciparum was diagnosed in 7 cases, mixed invasion in 2 cases and P. vivax- in one case. The majority of cases were in the age group 35-45 (8 cases) and were males (10 cases). Common reasons for travel to endemic countries were work-related (5 cases) and tourism or family visits (4 cases). Approximately half of the cases for whom the information was available used malaria chemoprophylaxis during their travel. Clinical course was severe in one case of P. falciparum malaria and the person died of the disease. The decreasing trend in malaria incidence in Poland is likely related to incomplete reporting as tourist and professional travel to endemic areas has not decreased and there is no indication of wider use ofchemoprophylaxis.

  20. A Comparative Proteome Profile of Female Mouse Gonads Suggests a Tight Link between the Electron Transport Chain and Meiosis Initiation.

    Science.gov (United States)

    Shen, Cong; Li, Mingrui; Zhang, Pan; Guo, Yueshuai; Zhang, Hao; Zheng, Bo; Teng, Hui; Zhou, Tao; Guo, Xuejiang; Huo, Ran

    2018-01-01

    Generation of haploid gametes by meiosis is a unique property of germ cells and is critical for sexual reproduction. Leaving mitosis and entering meiosis is a key step in germ cell development. Several inducers or intrinsic genes are known to be important for meiotic initiation, but the regulation of meiotic initiation, especially at the protein level, is still not well understood. We constructed a comparative proteome profile of female mouse fetal gonads at specific time points (11.5, 12.5, and 13.5 days post coitum), spanning a critical window for initiation of meiosis in female germ cells. We identified 3666 proteins, of which 473 were differentially expressed. Further bioinformatics analysis showed that these differentially expressed proteins were enriched in the mitochondria, especially in the electron transport chain and, notably, 9 proteins in electron transport chain Complex I were differentially expressed. We disrupted the mitochondrial electron transport chain function by adding the complex I inhibitor, rotenone to 11.5 days post coitum female gonads cultured in vitro. This treatment resulted in a decreased proportion of meiotic germ cells, as assessed by staining for histone γH2AX. Rotenone treatment also caused decreased ATP levels, increased reactive oxygen species levels and failure of the germ cells to undergo premeiotic DNA replication. These effects were partially rescued by adding Coenzyme Q10. Taken together, our results suggested that a functional electron transport chain is important for meiosis initiation. Our characterization of the quantitative proteome of female gonads provides an inventory of proteins, useful for understanding the mechanisms of meiosis initiation and female fertility. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

  1. [Trichinellosis in Poland in 2010].

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Gołab, Elzbieta

    2012-01-01

    Trichinellosis is still an epidemiological problem in Poland as well as in other countries in the European Union (EU). Across the EU, reporting cases oftrichinellosis is mandatory. In Poland, tirchinellosis is an endemic disease, occurring mainly in territories where it is customary to eat raw meat products prepared from pigs and wild boars. The aim of this work is to evaluate the epidemiological situation of trichinellosis in Poland in the year 2010 in comparison to previous years. Cases of trichinellosis infections were classified according to criteria contained in the definition approved by the European Committee on 28th April 2008 amending the decision 2002/253/EC, and was introduced in Poland in 2009. Case definitions used in are available at http://www.pzh. gov.pl/oldpage/epimeld/inne/Def_PL2_Rob1 h.pdf. An infection was classified and reported as Trichinella spp. if the genus of Trichinella that caused the infection was not specified using molecular examination. In 2010 the number of registered human trichinellosis cases was similar to the average number of cases from the last several years, and it did not exceed 55 (the exceptions were in 2004 and 2007, when larger outbreaks occurred). In 2010, 51 Trichinella infections were registered, yielding an infection rate of 0.13 per 100 000 inhabitants. The infections occurred in 5 voivodeships (table 1). Using the criteria from the definitions, 41 cases were classified as probable and 10 were confirmed cases. Trichinella infections diagnoses were based on the presence of clinical symptoms and an epidemiological link. Serological diagnostic tests confirming the presence of Trichinella antibodies was performed in approximately 20% of the cases. Four individual cases were reported, along with 4 outbreaks in which a total of 47 people were infected? The infections were generally mild. Twenty-two infected persons were hospitalised (43%). Just like in previous years, no trichinellosis-related deaths were reported. The

  2. Electronic structure computation and differential capacitance profile in δ-doped FET as a function of hydrostatic pressure

    Energy Technology Data Exchange (ETDEWEB)

    Carlos-Pinedo, C.; Rodríguez-Vargas, I.; Martínez-Orozco, J. C. [Unidad Académica de Física. Universidad Autónoma de Zacatecas. Calzada Solidaridad Esquina con Paseo la Bufa S/N. C.P. 98060, Zacatecas, Zac. (Mexico)

    2014-05-15

    In this work we present the results obtained from the calculation of the level structure of a n-type delta-doped well Field Effect Transistor when is subjected to hydrostatic pressure. We study the energy level structure as a function of hydrostatic pressure within the range of 0 to 6 kbar for different Schottky barrier height (SBH). We use an analytical expression for the effect of hydrostatic pressure on the SBH and the pressure dependence of the basic parameters of the system as the effective mass m(P) and the dielectric constant ε(P) of GaAs. We found that due to the effects of hydrostatic pressure, in addition to electronic level structure alteration, the profile of the differential capacitance per unit area C{sup −2} is affected.

  3. Electronic structure computation and differential capacitance profile in δ-doped FET as a function of hydrostatic pressure

    International Nuclear Information System (INIS)

    Carlos-Pinedo, C.; Rodríguez-Vargas, I.; Martínez-Orozco, J. C.

    2014-01-01

    In this work we present the results obtained from the calculation of the level structure of a n-type delta-doped well Field Effect Transistor when is subjected to hydrostatic pressure. We study the energy level structure as a function of hydrostatic pressure within the range of 0 to 6 kbar for different Schottky barrier height (SBH). We use an analytical expression for the effect of hydrostatic pressure on the SBH and the pressure dependence of the basic parameters of the system as the effective mass m(P) and the dielectric constant ε(P) of GaAs. We found that due to the effects of hydrostatic pressure, in addition to electronic level structure alteration, the profile of the differential capacitance per unit area C −2 is affected

  4. Profile measurements of localized fast electrons and ions in TORE SUPRA

    International Nuclear Information System (INIS)

    Basiuk, V.; Roubin, J.P.; Becoulet, A.; Carrasco, J.; Martin, G.; Moreau, D.; Saoutic, B.

    1992-01-01

    The strong toroidal and poloidal anisotropy of the heat flux to the first wall of Tore Supra during additional heating has been related to suprathermal particle losses induced by the TF ripple. In this paper we describe a new system of electric collectors designed to diagnose these localized particles and we analyse measurements performed during LHCD, ICRH and NBI heating. The interaction of fast particles created by additional heating with the TF ripple perturbation in Tore Supra has been analyzed by a direct measurement of the localized particles. The good confinement region has been identified thanks to a peak in the measured current profiles and is in agreement with theory. During LHCD and ICRH, the global losses are weak but strongly anisotropic leading to hot spots at the wall. During ICRH, an ejection of fast ions by the sawteeth towards peripheral zones where they get lost in the ripple has been seen. This is a possible scenario of α particle losses in a reactor

  5. Global proteomic profiling of phosphopeptides using electron transfer dissociation tandem mass spectrometry

    DEFF Research Database (Denmark)

    Molina, Henrik; Horn, David M; Tang, Ning

    2007-01-01

    Electron transfer dissociation (ETD) is a recently introduced mass spectrometric technique that provides a more comprehensive coverage of peptide sequences and posttranslational modifications. Here, we evaluated the use of ETD for a global phosphoproteome analysis. In all, we identified a total...... of 1,435 phosphorylation sites from human embryonic kidney 293T cells, of which 1,141 ( approximately 80%) were not previously described. A detailed comparison of ETD and collision-induced dissociation (CID) modes showed that ETD identified 60% more phosphopeptides than CID, with an average of 40% more...... fragment ions that facilitated localization of phosphorylation sites. Although our data indicate that ETD is superior to CID for phosphorylation analysis, the two methods can be effectively combined in alternating ETD and CID modes for a more comprehensive analysis. Combining ETD and CID, from this single...

  6. Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics

    DEFF Research Database (Denmark)

    Mortensen, Peter Mølgaard; Jensen, Anker Degn; Hansen, Thomas Willum

    2015-01-01

    The temperature and velocity field, pressure distribution, and the temperature variation across the sample region inside an environmental transmission electron microscope (ETEM) have been modeled by means of computational fluid dynamics (CFD). Heating the sample area by a furnace type TEM holder...... gives rise to temperature gradients over the sample area. Three major mechanisms have been identified with respect to heat transfer in the sample area: radiation from the grid, conduction in the grid, and conduction in the gas. A parameter sensitivity analysis showed that the sample temperature...... was affected by the conductivity of the gas, the emissivity of the sample grid, and the conductivity of the grid. Ideally the grid should be polished and made from a material with good conductivity, e.g. copper. With hydrogen gas, which has the highest conductivity of the gases studied, the temperature...

  7. Improving the Automatic Inversion of Digital ISIS-2 Ionogram Reflection Traces into Topside Vertical Electron-Density Profiles

    Science.gov (United States)

    Benson, R. F.; Truhlik, V.; Huang, X.; Wang, Y.; Bilitza, D.

    2011-01-01

    The topside-sounders on the four satellites of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35-mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the TOPside Ionogram Scalar with True-height (TOPIST) algorithm has been produced that enables the automatic inversion of ISIS-2 ionogram reflection traces into topside vertical electron-density profiles Ne(h). More than million digital Alouette/ISIS topside ionograms have been produced and over 300,000 are from ISIS 2. Many of these ISIS-2 ionograms correspond to a passive mode of operation for the detection of natural radio emissions and thus do not contain ionospheric reflection traces. TOPIST, however, is not able to produce Ne(h) profiles from all of the ISIS-2 ionograms with reflection traces because some of them did not contain frequency information. This information was missing due to difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame-sync pulse and/or the frequency markers. Of the many digital topside ionograms that TOPIST was able to process, over 200 were found where direct comparisons could be made with Ne(h) profiles that were produced by manual scaling in the early days of the ISIS program. While many of these comparisons indicated excellent agreement (inversion process: (1) improve the quality of the digital ionogram database by remedying the missing frequency-information problem when possible, and (2) using the above-mentioned comparisons as teaching examples of how to improve the original TOPIST software.

  8. Sub-millisecond electron density profile measurement at the JET tokamak with the fast lithium beam emission spectroscopy system

    Science.gov (United States)

    Réfy, D. I.; Brix, M.; Gomes, R.; Tál, B.; Zoletnik, S.; Dunai, D.; Kocsis, G.; Kálvin, S.; Szabolics, T.; JET Contributors

    2018-04-01

    Diagnostic alkali atom (e.g., lithium) beams are routinely used to diagnose magnetically confined plasmas, namely, to measure the plasma electron density profile in the edge and the scrape off layer region. A light splitting optics system was installed into the observation system of the lithium beam emission spectroscopy diagnostic at the Joint European Torus (JET) tokamak, which allows simultaneous measurement of the beam light emission with a spectrometer and a fast avalanche photodiode (APD) camera. The spectrometer measurement allows density profile reconstruction with ˜10 ms time resolution, absolute position calculation from the Doppler shift, spectral background subtraction as well as relative intensity calibration of the channels for each discharge. The APD system is capable of measuring light intensities on the microsecond time scale. However ˜100 μs integration is needed to have an acceptable signal to noise ratio due to moderate light levels. Fast modulation of the beam up to 30 kHz is implemented which allows background subtraction on the 100 μs time scale. The measurement covers the 0.9 background subtraction, the relative calibration, and the comprehensive error calculation, runs a Bayesian density reconstruction code, and loads results to the JET database. The paper demonstrates the capability of the APD system by analyzing fast phenomena like pellet injection and edge localized modes.

  9. Edge electron density profiles and fluctuations measured by two-dimensional beam emission spectroscopy in the KSTAR

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Y. U., E-mail: yunam@nfri.re.kr; Wi, H. M. [National Fusion Research Institute, Daejeon (Korea, Republic of); Zoletnik, S.; Lampert, M. [Wigner RCP Institute for Particle and Nuclear Physics, Budapest (Hungary); Kovácsik, Ákos [Institute of Nuclear Techniques, Budapest Technical University, Budapest (Hungary)

    2014-11-15

    Beam emission spectroscopy (BES) system in Korea Superconducting Tokamak Advanced Research (KSTAR) has recently been upgraded. The background intensity was reduced from 30% to 2% by suppressing the stray lights. This allows acquisition of the relative electron density profiles on the plasma edge without background subtraction from the beam power modulation signals. The KSTAR BES system has its spatial resolution of 1 cm, the temporal resolution of 2 MHz, and a total 32 channel (8 radial × 4 poloidal) avalanche photo diode array. Most measurements were done on the plasma edge, r/a ∼ 0.9, with 8 cm radial measurement width that covers the pedestal range. High speed density profile measurements reveal temporal behaviors of fast transient events, such as the precursors of edge localized modes and the transitions between confinement modes. Low background level also allows analysis of the edge density fluctuation patterns with reduced background fluctuations. Propagation of the density structures can be investigated by comparing the phase delays between the spatially distributed channels.

  10. What Determines State Capture in Poland?

    Directory of Open Access Journals (Sweden)

    Stanisław Alwasiak

    2013-12-01

    Full Text Available Purpose: This study examines the determinants of ex-ante state capture in Poland. Methodology: In order to establish the determinants of ex-ante state capture a logistic regression is estimated. Findings: The study shows that in Poland the majority of legal acts were passed with the aim to satisfy the interest of particular groups. Furthermore, the regression analysis shows that the likelihood of state capture increases during the period of higher economic growth and local elections. The likelihood of state capture, however, declines during presidential elections. The results we attribute to different interests of political parties in the period of local and presidential elections. Finally, we fi nd that the state capture increased over the years in Poland. Additionally, we show that the EU accession did not prevent state capture in Poland. In contrast, the fi nancial crisis of 2007 resulted in a wake-up effect and the likelihood of state capture declined in Poland. Research limitations: In the study we employ proxies for state capture, yet we assume that corruption is a widespread phenomenon in Poland. However, due to its nature corruption is very diffi cult to assess and measure. Originality: The study uses a unique dataset on ex-ante state capture that was identifi ed in the legal acts that have been passed in the period 1990–2011 in Poland.

  11. Nuclear power in Poland. Prospect and conditions

    International Nuclear Information System (INIS)

    Chwaszczewski, S.

    1995-01-01

    Poland started the works on construction of first nuclear power plant in 1992. The social protest as well as deep political and economical changes in Poland induced the decision of the Polish government to abandon the construction of the nuclear power plant in Zarnowiec. After the period of political and economical transformation, in 1992 Polish economy starts to grow up, also growth of the electric power consumption. Are there prospect for utilization in Poland the nuclear power plant? This work is devoted to analyse such question. The present structure of power and fuel materials in Poland were analysed and the possible direction of changes was shown for the period up to 2020 year. It was stated, that the economical development in Poland should be bound with the growth of the consumption of most effective fuel and energy. These fuel or energy should be imported to Poland. Therefore, the nuclear power should be treated as one of possible ways of the balance of electric power in Poland. Particularly, that it will be expected the special ecological conditions in the energy production in Europe. In the present work, was shown, that the nuclear power was discriminated in the analysis of the development of power and fuel system in Poland. The incorrect values of economical parameters concerning of the nuclear power plant was used in the analysing numerical programs. The investment costs, design time and fuel price for nuclear energy was analysed, and shown, that in the proper conditions, the cost of the electric energy produced in the nuclear power plant is compared with the costs of electric energy produced in the conventional power stations. In this work, the proposals of the basic nuclear and radiological safety standards for the nuclear power plant in Poland are shown. (author). 20 refs, 10 figs, 3 tabs

  12. Joint refinement model for the spin resolved one-electron reduced density matrix of YTiO3 using magnetic structure factors and magnetic Compton profiles data.

    Science.gov (United States)

    Gueddida, Saber; Yan, Zeyin; Kibalin, Iurii; Voufack, Ariste Bolivard; Claiser, Nicolas; Souhassou, Mohamed; Lecomte, Claude; Gillon, Béatrice; Gillet, Jean-Michel

    2018-04-28

    In this paper, we propose a simple cluster model with limited basis sets to reproduce the unpaired electron distributions in a YTiO 3 ferromagnetic crystal. The spin-resolved one-electron-reduced density matrix is reconstructed simultaneously from theoretical magnetic structure factors and directional magnetic Compton profiles using our joint refinement algorithm. This algorithm is guided by the rescaling of basis functions and the adjustment of the spin population matrix. The resulting spin electron density in both position and momentum spaces from the joint refinement model is in agreement with theoretical and experimental results. Benefits brought from magnetic Compton profiles to the entire spin density matrix are illustrated. We studied the magnetic properties of the YTiO 3 crystal along the Ti-O 1 -Ti bonding. We found that the basis functions are mostly rescaled by means of magnetic Compton profiles, while the molecular occupation numbers are mainly modified by the magnetic structure factors.

  13. Hybrid corporate governance: a choice for Poland?

    OpenAIRE

    Samól, Katarzyna A.

    2014-01-01

    The purpose of the research investigation is to consider the potential opportunities through which corporate governance may be developed to better suit the developing commercial culture within Poland. In order to do this, I formulate the following research questions: ‘What are the weaknesses of the Polish corporate governance system?’, ‘What changes should be made to corporate governance in Poland?’, and ‘Is a hybrid corporate governance model a choice for Poland?’ The concept of hybridisatio...

  14. Assessment of a Standardized ROS Production Profile in Humans by Electron Paramagnetic Resonance

    Directory of Open Access Journals (Sweden)

    Simona Mrakic-Sposta

    2012-01-01

    Full Text Available Despite the growing interest in the role of reactive oxygen species (ROS in health and disease, reliable quantitative noninvasive methods for the assessment of oxidative stress in humans are still lacking. EPR technique, coupled to a specific spin probe (CMH: 1-hydroxy-3-methoxycarbonyl-2,2,5,5-tetramethylpyrrolidine is here presented as the method of choice to gain a direct measurement of ROS in biological fluids and tissues. The study aimed at demonstrating that, differently from currently available “a posteriori” assays of ROS-induced damage by means of biomolecules (e.g., proteins and lipids spin-trapping EPR provides direct evidence of the “instantaneous” presence of radical species in the sample and, as signal areas are proportional to the number of excited electron spins, lead to absolute concentration levels. Using a recently developed bench top continuous wave system (e-scan EPR scanner, Bruker dealing with very low ROS concentration levels in small (50 μL samples, we successfully monitored rapid ROS production changes in peripheral blood of athletes after controlled exercise and sedentary subjects after antioxidant supplementation. The correlation between EPR results and data obtained by various enzymatic assays (e.g., protein carbonyls and thiobarbituric acid reactive substances was determined too. Synthetically, our method allows reliable, quick, noninvasive quantitative determination of ROS in human peripheral blood.

  15. Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics

    International Nuclear Information System (INIS)

    Mølgaard Mortensen, Peter; Willum Hansen, Thomas; Birkedal Wagner, Jakob; Degn Jensen, Anker

    2015-01-01

    The temperature and velocity field, pressure distribution, and the temperature variation across the sample region inside an environmental transmission electron microscope (ETEM) have been modeled by means of computational fluid dynamics (CFD). Heating the sample area by a furnace type TEM holder gives rise to temperature gradients over the sample area. Three major mechanisms have been identified with respect to heat transfer in the sample area: radiation from the grid, conduction in the grid, and conduction in the gas. A parameter sensitivity analysis showed that the sample temperature was affected by the conductivity of the gas, the emissivity of the sample grid, and the conductivity of the grid. Ideally the grid should be polished and made from a material with good conductivity, e.g. copper. With hydrogen gas, which has the highest conductivity of the gases studied, the temperature difference over the TEM grid is less than 5 °C, at what must be considered typical conditions, and it is concluded that the conditions on the sample grid in the ETEM can be considered as isothermal during general use. - Highlights: • Computational fluid dynamics used for mapping flow and temperature in ETEM setup. • Temperature gradient across TEM grid in furnace based heating holder very small in ETEM. • Conduction from TEM grid and gas in addition to radiation from TEM grid most important. • Pressure drop in ETEM limited to the pressure limiting apertures

  16. Salmonellosis in Poland in 2014

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Czarkowski, Mirosław P

    The aim of the study is to assess the epidemiological situation of salmonellosis in Poland in 2014 in comparison to the previous years. The evaluation was based on the data from the bulletin “Infectious diseases and poisoning in Poland 2014”, information from the laboratories of sanitary-epidemiological stations and reports from the epidemiological investigations in outbreaks of salmonellosis, sent by the sanitary-epidemiological stations to the Department of Epidemiology, as well as the data from the Department of Demographic Studies of the Central Statistical Office. Cases were classified according to the definitions adopted in the UE. In 2014, a total number of 8 392 cases of salmonellosis derived from animals were reported, including 8 197 cases of intestinal salmonellosis and 195 cases of extraintestinal. The total incidence was 21.8/100 000. Almost 96% of the cases met the criteria for a confirmed case. The number of registered cases was, for the first time since many years, higher than in the previous year, but still lower than the median for 2008-2012. A very high percentage (approximately 70%) of hospitalizations remains among patients diagnosed with salmonellosis. Approximately 33% of all cases in outbreaks of salmonellosis were hospitalized. The highest incidence was among children under the age of 5 years. Salmonellosis was reported as the cause of death for 13 patients. In 2014 there were 171 outbreaks reported with Salmonella as an etiological agent. Majority of them were small outbreaks limited to the family in singular household, and the total number of cases in those outbreaks amounted to 1 229 people. In Poland the most common etiological agent of salmonellosis is (and have been for many years) S. Enteritidis. In 2014, the first time in many years, an increase was recorded in the annual number of cases of salmonellosis. A very high percentage of hospitalizations for salmonellosis cases indicates a relatively rare practice among GPs in ordering

  17. Nucleonic gauges in Poland and new approach to their calibration

    International Nuclear Information System (INIS)

    Urbanski, P.

    2000-01-01

    The current status of manufacturing and application of radioisotope gauges in Poland is presented. Metrological performance of the gauges is briefly described and their expected future prospects on the market of the industrial measuring instruments are discussed. Progress in electronic engineering and common use of the microprocessor systems in the radioisotope gauges made possible application of the sophisticated methods of signal processing and data treatment, as for example statistical multivariate analysis. Some examples of the multivariate calibration of nucleonic gauges are presented. Application of the partial least square regression (PLS) and artificial neural network (ANN) for calibration of the gauges has been shown. (author)

  18. Safety-factor profile tailoring by improved electron cyclotron system for sawtooth control and reverse shear scenarios in ITER

    International Nuclear Information System (INIS)

    Zucca, C.; Sauter, O.; Fable, E.; Henderson, M. A.; Polevoi, A.; Farina, D.; Ramponi, G.; Saibene, G.; Zohm, H.

    2008-01-01

    The effect of the predicted local electron cyclotron current driven by the optimized electron cyclotron system on ITER is discussed. A design variant was recently proposed to enlarge the physics program covered by the upper and equatorial launchers. By extending the functionality range of the upper launcher, significant control capabilities of the sawtooth period can be obtained. The upper launcher improvement still allows enough margin to exceed the requirements for neoclassical tearing mode stabilization, for which it was originally designed. The analysis of the sawtooth control is carried on with the ASTRA transport code, coupled with the threshold model by Por-celli, to study the control capabilities of the improved upper launcher on the sawtooth instability. The simulations take into account the significant stabilizing effect of the fusion alpha particles. The sawtooth period can be increased by a factor of 1.5 with co-ECCD outside the q = 1 surface, and decreased by at least 30% with co-ECCD inside q = 1. The present ITER base-line design has the electron cyclotron launchers providing only co-ECCD. The variant for the equatorial launcher proposes the possibility to drive counter-ECCD with 1 of the 3 rows of mirrors: the counter-ECCD can then be balanced with co-ECCD and provide pure ECH with no net driven current. The difference between full co-ECCD off-axis using all 20MW from the equatorial launcher and 20MW co-ECCD driven by 2/3 from the equatorial launcher and 1/3 from the upper launcher is shown to be negligible. Cnt-ECCD also offers greater control of the plasma current density, therefore this analysis addresses the performance of the equatorial launcher to control the central q profile. The equatorial launcher is shown to control very efficiently the value of q 0.2 -q min in advanced scenarios, if one row provides counter-ECCD.

  19. Optimising the cam profile of an electronic unit pump for a heavy-duty diesel engine

    International Nuclear Information System (INIS)

    Qiu, Tao; Dai, Hefei; Lei, Yan; Cao, Chunlei; Li, Xuchu

    2015-01-01

    For a fuel system with a tangent cam or a constant-velocity cam, the peak injection pressure continues to rise as the injection duration increases, but overly high peak pressures induce mechanical loads and wear, limiting the maximum engine speed and injection quantity. To improve the performance of an EUP (Electronic Unit Pump) fuel system for heavy-duty diesel engines, this work proposes a new pump cam, namely the constant-pressure cam. It helps the EUP run at a higher speed and deliver larger fuel quantities while maintaining a constant peak injection pressure, which improves the power of the heavy-duty diesel engine. A model based on the EUP was built to determine the three constraints for optimising the constant-pressure cam: 1) the pump pressure should equal the nozzle pressure; 2) the cam speed should decrease with the increase in the injection duration; and 3) the cam acceleration gradient should be zero. An EUP system was tested with the tangent cam and the optimised cam under different conditions. The experimental results show that the EUP system with the optimised cam delivers more injection quantity and runs at higher engine speeds while maintaining the same peak pressure as the tangent cam. - Highlights: • We propose a constant-pressure cam to improve the power of heavy-duty diesel engine. • We deduce three constraints for the CP (constant-peak pressure) cam based on a model. • The EUP system with the new cam works well under higher engine speed. • The peak pressure of the constant-pressure cam fuel system maintains high

  20. [Malaria in Poland in 2008].

    Science.gov (United States)

    Stepień, Małgorzata

    2010-01-01

    There were 22 malaria cases confirmed according to the European Union cases definition registered in Poland in 2008. All of them were imported, 13 cases (59%) from Africa, 3 from Asia, 5 from Oceania and 1 from South America. Invasion with Plasmodium falciparum was confirmed in 14 cases, P. vivax in 4 cases, mixed invasion in 2 cases and in 2 cases species of Plasmodium was undetermined. There were 13 cases in males and 9 in females. Age at onset ranged from 23 to 58 years and majority of cases were in the age group 25-40. Common reason for travel to endemic countries were tourism (11 cases) and work-related visits (7 cases). Clinical course was severe in 6 cases of P. falciparum malaria and 1 person died because of the disease. Nine cases used chemoprophylaxis during their travel but only one of them appropriately, relevant information was missing in 6 cases.

  1. [Malaria in Poland in 2006].

    Science.gov (United States)

    Rosińska, Magdalena

    2008-01-01

    There were 19 cases of malaria meeting European Union case definition for confirmed case registered in Poland in 2006. All of them were imported, including 1 case of relapse: 17 from Africa, 1 from Asia and 1 from Oceania. Species of Plasmodium was determined for 12 cases (68%): P. falciparum in 12 cases and P. vivax in one. There were 15 cases in males and 4 in females. Age at onset ranged from 17 to 59 years and a considerable number of cases occurred in persons 50 years old or older (5.26%). Common reasons for travel to endemic countries included tourism or family visits (10 cases) and professional or missionary travel (5 cases). Only four cases used chemoprophylaxis and the relevant information was missing in 4 cases. In two cases of malaria caused by Pl. falciparum the clinical course was severe and one of them died.

  2. Uncooled infrared photodetectors in Poland

    Science.gov (United States)

    Piotrowski, J.; Piotrowski, A.

    2006-03-01

    The history and present status of the middle and long wavelength Hg1-xCdxTe infrared detectors in Poland are reviewed. Research and development efforts in Poland were concentrated mostly on uncooled market niche. Technology of the infrared photodetectors has been developed by several research groups. The devices are based on mercury-based variable band gap semiconductor alloys. Modified isothermal vapour phase epitaxy (ISOVPE) has been used for many years for research and commercial fabrication of photoconductive, photoelectromagnetic and other devices. Bulk growth and liquid phase epitaxy was also used. At present, the fabrication of IR devices relies on low temperature epitaxial technique, namely metalorganic vapour phase deposition (MOCVD), frequently in combination with the ISOVPE. Photoconductive and photoelectromagnetic detectors are still in production. The devices are gradually replaced with photovoltaic devices which offer inherent advantages of no electric or magnetic bias, no heat load and no flicker noise. Potentially, the PV devices could offer high performance and very fast response. At present, the uncooled long wavelength devices of conventional design suffer from two issues; namely low quantum efficiency and very low junction resistance. It makes them useless for practical applications. The problems have been solved with advanced 3D band gap engineered architecture, multiple cell heterojunction devices connected in series, monolithic integration of the detectors with microoptics and other improvements. Present fabrication program includes devices which are optimized for operation at any wavelength within a wide spectral range 1-15 μm and 200-300 K temperature range. Special solutions have been applied to improve speed of response. Some devices show picoseconds range response time. The devices have found numerous civilian and military applications.

  3. Polar observations of electron density distribution in the Earth’s magnetosphere. 2. Density profiles

    Directory of Open Access Journals (Sweden)

    H. Laakso

    2002-11-01

    Full Text Available Using spacecraft potential measurements of the Polar electric field experiment, we investigate electron density variations of key plasma regions within the magnetosphere, including the polar cap, cusp, trough, plasmapause, and auroral zone. The statistical results were presented in the first part of this study, and the present paper reports detailed structures revealed by individual satellite passes. The high-altitude (> 3 RE polar cap is generally one of the most tenuous regions in the magnetosphere, but surprisingly, the polar cap boundary does not appear as a steep density decline. At low altitudes (1 RE in summer, the polar densities are very high, several 100 cm-3 , and interestingly, the density peaks at the central polar cap. On the noonside of the polar cap, the cusp appears as a dense, 1–3° wide region. A typical cusp density above 4 RE distance is between several 10 cm-3 and a few 100 cm-3 . On some occasions the cusp is crossed multiple times in a single pass, simultaneously with the occurrence of IMF excursions, as the cusp can instantly shift its position under varying solar wind conditions, similar to the magnetopause. On the nightside, the auroral zone is not always detected as a simple density cavity. Cavities are observed but their locations, strengths, and sizes vary. Also, the electric field perturbations do not necessarily overlap with the cavities: there are cavities with no field disturbances, as well as electric field disturbances observed with no clear cavitation. In the inner magnetosphere, the density distributions clearly show that the plasmapause and trough densities are well correlated with geomagnetic activity. Data from individual orbits near noon and midnight demonstrate that at the beginning of geomagnetic disturbances, the retreat speed of the plasmapause can be one L-shell per hour, while during quiet intervals the plasmapause can expand anti-earthward at the same speed. For the trough region, it is found

  4. Dr Stanislaw Huskowski, Mayor of Wroclaw, Poland

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Dr Stanislaw Huskowski, Mayor of Wroclaw, Poland visiting the ATLAS magnet assembly hall, building 180. From l to r: Mr Carlo Lamprecht, State Councillor, Dr Stanislaw Huskowski and Dr Peter Jenni, ATLAS Spokesperson

  5. Dr Stanislaw Huskowski, Mayor of Wroclaw, Poland

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Dr Stanislaw Huskowski, Mayor of Wroclaw, Poland visiting the ATLAS magnet assembly hall, building 180 with Mr Carlo Lamprecht, State Councillor, Dr Stanislaw Huskowski and Dr Peter Jenni, ATLAS Spokesperson

  6. SELECTED PROBLEMS OF REVERSE LOGISTICS IN POLAND

    OpenAIRE

    Agata Mesjasz-Lech

    2009-01-01

    This paper presents the essence of reverse logistics and directions of physical and information flows between logistic network partners. It also analyses effects of implementation of the principles of reverse logistics in Poland in the years 2004-2007

  7. Policy factors affecting broadband development in Poland

    DEFF Research Database (Denmark)

    Henten, Anders; Windekilde, Iwona Maria

    2014-01-01

    of telecommunications network development in Poland than other countries in the European Union is the reason that the circumstances and also the effects of the implementation of some solutions of the EU regulation model are different in Poland than in the most developed EU countries. The aim of the paper is to examine...... and discuss broadband access development in Poland and the policy factors influencing this development as well as to examine national strategies used to stimulate service and infrastructure competition in Poland. There are, indeed, many other factors affecting broadband development such as the income level....../distribution in the country and the infrastructural point of departure. The paper, therefore, analyses the implications of the policy initiatives in light of these basic conditions and the broader context of factors influencing broadband development. In the paper, different kinds of policy initiatives are examined...

  8. Marketing of organic products in southern Poland

    OpenAIRE

    Kuboń Maciej; Olech Elżbieta

    2018-01-01

    The article presents an outline of the issue concerning formulation of a marketing strategy and the possibility of using the knowledge on consumers' preferences for organic development of farms and their products on the example of southern Poland. The paper analyses the distribution process of organic food in the aspect of developing innovative marketing strategies. The studies were performed in 50 organic farms and on the example of 100 respondents from the region of southern Poland. In the ...

  9. Punk and Anarchist Squats in Poland

    OpenAIRE

    Donaghey, Jim

    2017-01-01

    Squats are of notable importance in the punk scene in Poland, and these spaces are a key aspect of the relationship between anarchism and punk. However, the overlap of squatting, punk, and anarchism is not without its tensions. This article, drawn from ethnographic research carried out between 2013 and 2014, explores the issues around punk and anarchist squats in Poland, looking at: criticisms levelled at punk squats by ‘non-punk’ squatting activists (e.g. Przychodnia in Warsaw); instances of...

  10. Orobanche elatior and O. kochii (Orobanchaceae in Poland: distribution, taxonomy, plant communities and seed micromorphology

    Directory of Open Access Journals (Sweden)

    Renata Piwowarczyk

    2015-03-01

    Full Text Available Species of the genus Orobanche (Orobanchaceae, parasitic on Centaurea in Central Europe, were previously considered to belong to the O. elatior group. At present, the taxon is differentiated into two species, O. elatior Sutton and O. kochii F.W. Schultz. The paper presents for the first time the distribution of O. elatior and O. kochii in Poland based on a critical revision of herbarium and the literature data, as well as the results of field studies conducted between 1999 and 2014. The majority of the species’ localities are in south Poland: Silesia-Cracow, Małopolska and the Lublin Uplands. The distribution of both species in Poland is mapped and chronologically organized, and is thus the most recent in Europe. The taxonomy, host preferences, and ecology are also discussed. Seeds of both species were also investigated using light and scanning electron microscopy, which resulted in the designation of diagnostic features. The new color form of O. kochii f. citrina is described and illustrated. An account of all revised herbarium specimens collected from Poland, deposited in Poland and neighboring countries, is presented.

  11. Clinical and angiographic profile of patients with markedly elevated coronary calcium scores (≥1000) detected by electron beam computed tomography

    International Nuclear Information System (INIS)

    Almeda, Francis Q.; Shah, Rima; Senter, Shaun; Kason, Thomas T.; Haynie, Justin; Calvin, James E.; Kavinsky, Clifford J.; Snell, R. Jeffrey; Schaer, Gary L.; McLaughlin, Vallerie V.

    2004-01-01

    Objective: The objective of this study was to determine the clinical and angiographic profile of patients with extremely high coronary artery calcium scores (CACS; ≥1000) by electron beam computed tomography (EBCT). Methods: All patients at Rush University Medical Center who had a calcium score ≥1000 and a coronary angiogram performed from 1997 to 2002 were identified using a prospectively collected database. The baseline demographics, symptom status, and degree of coronary stenosis by angiography and subsequent rate of coronary intervention were compared with that of patients with calcium scores <1000. Results: The clinical and angiographic profile of patients with severe coronary calcification, detected by EBCT, revealed that patients with scores ≥1000 had a significantly higher prevalence of coronary stenosis ≥50% compared with patients with scores <1000 (97% vs. 57%, P<.001). The group with CACS ≥1000 was more likely to be male (90% vs. 75%, P=.027) and was older (64±8 vs. 59±10, P=.001) compared with the group with less severe calcification. Although there was a significantly higher rate of luminal stenosis detected by coronary angiography in the cohort with CACS ≥1000, there was no difference in subsequent percutaneous coronary intervention (PCI) and utilization of intracoronary stents between the two groups. Conclusions: A markedly elevated coronary calcium score (≥1000) is correlated with increasing age and is associated with an increased likelihood of coronary stenosis ≥50%. However, the decision to perform coronary angiography in patients with severe coronary calcification should not be based solely on these findings, but should remain primarily dependent on the degree of ischemia detected by clinical and functional assessment

  12. ETMB-RBF: discrimination of metal-binding sites in electron transporters based on RBF networks with PSSM profiles and significant amino acid pairs.

    Science.gov (United States)

    Ou, Yu-Yen; Chen, Shu-An; Wu, Sheng-Cheng

    2013-01-01

    Cellular respiration is the process by which cells obtain energy from glucose and is a very important biological process in living cell. As cells do cellular respiration, they need a pathway to store and transport electrons, the electron transport chain. The function of the electron transport chain is to produce a trans-membrane proton electrochemical gradient as a result of oxidation-reduction reactions. In these oxidation-reduction reactions in electron transport chains, metal ions play very important role as electron donor and acceptor. For example, Fe ions are in complex I and complex II, and Cu ions are in complex IV. Therefore, to identify metal-binding sites in electron transporters is an important issue in helping biologists better understand the workings of the electron transport chain. We propose a method based on Position Specific Scoring Matrix (PSSM) profiles and significant amino acid pairs to identify metal-binding residues in electron transport proteins. We have selected a non-redundant set of 55 metal-binding electron transport proteins as our dataset. The proposed method can predict metal-binding sites in electron transport proteins with an average 10-fold cross-validation accuracy of 93.2% and 93.1% for metal-binding cysteine and histidine, respectively. Compared with the general metal-binding predictor from A. Passerini et al., the proposed method can improve over 9% of sensitivity, and 14% specificity on the independent dataset in identifying metal-binding cysteines. The proposed method can also improve almost 76% sensitivity with same specificity in metal-binding histidine, and MCC is also improved from 0.28 to 0.88. We have developed a novel approach based on PSSM profiles and significant amino acid pairs for identifying metal-binding sites from electron transport proteins. The proposed approach achieved a significant improvement with independent test set of metal-binding electron transport proteins.

  13. Changes in the aromatic profile of espresso coffee as a function of the grinding grade and extraction time: a study by the electronic nose system.

    Science.gov (United States)

    Severini, C; Ricci, I; Marone, M; Derossi, A; De Pilli, T

    2015-03-04

    The changes in chemical attributes and aromatic profile of espresso coffee (EC) were studied taking into account the extraction time and grinding level as independent variables. Particularly, using an electronic nose system, the changes of the global aromatic profile of EC were highlighted. The results shown as the major amounts of organic acids, solids, and caffeine were extracted in the first 8 s of percolation. The grinding grade significantly affected the quality of EC probably as an effect of the particle size distribution and the percolation pathways of water through the coffee cake. The use of an electronic nose system allowed us to discriminate the fractions of the brew as a function of the percolation time and also the regular coffee obtained from different grinding grades. Particularly, the aromatic profile of a regular coffee (25 mL) was significantly affected by the grinding level of the coffee grounds and percolation time, which are two variables under the control of the bar operator.

  14. Monte Carlo investigation of the effect of small cutouts on beam profile parameters of 12 and 14 MeV electron beams

    International Nuclear Information System (INIS)

    Khaledi, Navid; Arbabi, Azim; Sardari, Dariush; Rabie Mahdavi, Seied; Aslian, Hossein; Dabaghi, Moloud; Sheibani, Kourosh

    2013-01-01

    Cutouts, which are used as field-shaping shield, affect several electron beam parameters. These effects are more observable for small field sizes and high energy electron beams. Owing to the fact that small fields prevent the lateral scatter equilibrium, at higher energies larger field radius is required for the establishment of lateral equilibrium. The profile curves are derived from circular, triangular, and square cutout shapes and size placed in a 10 × 10 cm 2 electron applicator. These profile curves are obtained using parallel plane type ion chamber at the R 100 , R 90 , R 80 and R 50 depths. Correspondingly, the source surface distance is 100 cm. In this study MCNP Monte Carlo (MC) simulation was used to compare Percentage Depth Dose (PDD) and Profile of electron beams. Monte Carlo and measured results showed a good compliance for PDD and beam profile. The measurements and calculations showed that as the field width decreases, the Flatness and Penumbra Ratio also decreases. In other words, flatter plateau was available for larger fields. Also the Coverage Ratio for each of the profiles is presented. The flatness and symmetry values for triangle shapes were greater than the two other shapes. Knowledge of these changes are significant in radiation therapy. Accordingly, a comparison between the Monte Carlo data and the measured results can be beneficial for treatment simulation and development of treatment planning systems. - Highlights: ► Mesh Tally 1 and pedep keyword were used to calculate the PDD and profile values. ► In measurement the coverage for larger fields and fewer doses are better. ► By increasing the depth, the flatness and symmetry values were increased. ► The worst flatness and symmetry (between 3 compared shapes) belonged to triangle. ► The given Penumbra and Coverage Ratio can be helpful for PTV margin and coverage

  15. Characterization of oxide layers on amorphous Mg-based alloys by Auger electron spectroscopy with sputter depth profiling

    Energy Technology Data Exchange (ETDEWEB)

    Baunack, S.; Wolff, U. [Leibniz-Institut fuer Festkoerper- und Werkstoffforschung Dresden, Postfach 270016, 01171, Dresden (Germany); Subba Rao, R.V. [Indira Ghandi Centre for Atomic Research, 603 102, Kalpakkam, Tamil Nadu (India)

    2003-04-01

    Amorphous ribbons of Mg-Y-TM-[Ag](TM: Cu, Ni), prepared by melt spinning, were subjected to electrochemical investigations. Oxide layers formed anodically under potentiostatic control in different electrolytes were investigated by AES and sputter depth profiling. Problems and specific features of characterization of the composition of oxide layers and amorphous ternary or quaternary Mg-based alloys have been investigated. In the alloys the Mg(KL{sub 23}L{sub 23}) peak exhibits a different shape compared to that in the pure element. Analysis of the peak of elastically scattered electrons proved the absence of plasmon loss features, characteristic of pure Mg, in the alloy. A different loss feature emerges in Mg(KL{sub 23}L{sub 23}) and Cu(L{sub 23}VV). The system Mg-Y-TM-[Ag] suffers preferential sputtering. Depletion of Mg and enrichment of TM and Y are found. This is attributed mainly to the preferential sputtering of Mg. Thickness and composition of the formed oxide layer depend on the electrochemical treatment. After removing the oxide by sputtering the concentration of the underlying alloy was found to be affected by the treatment. (orig.)

  16. Time Variations of Observed H α Line Profiles and Precipitation Depths of Nonthermal Electrons in a Solar Flare

    Energy Technology Data Exchange (ETDEWEB)

    Falewicz, Robert; Radziszewski, Krzysztof; Rudawy, Paweł; Berlicki, Arkadiusz, E-mail: falewicz@astro.uni.wroc.pl, E-mail: radziszewski@astro.uni.wroc.pl, E-mail: rudawy@astro.uni.wroc.pl, E-mail: berlicki@astro.uni.wroc.pl [Astronomical Institute, University of Wrocław, 51-622 Wrocław, ul. Kopernika 11 (Poland)

    2017-10-01

    We compare time variations of the H α and X-ray emissions observed during the pre-impulsive and impulsive phases of the C1.1-class solar flare on 2013 June 21 with those of plasma parameters and synthesized X-ray emission from a 1D hydrodynamic numerical model of the flare. The numerical model was calculated assuming that the external energy is delivered to the flaring loop by nonthermal electrons (NTEs). The H α spectra and images were obtained using the Multi-channel Subtractive Double Pass spectrograph with a time resolution of 50 ms. The X-ray fluxes and spectra were recorded by RHESSI . Pre-flare geometric and thermodynamic parameters of the model and the delivered energy were estimated using RHESSI data. The time variations of the X-ray light curves in various energy bands and those of the H α intensities and line profiles were well correlated. The timescales of the observed variations agree with the calculated variations of the plasma parameters in the flaring loop footpoints, reflecting the time variations of the vertical extent of the energy deposition layer. Our result shows that the fast time variations of the H α emission of the flaring kernels can be explained by momentary changes of the deposited energy flux and the variations of the penetration depths of the NTEs.

  17. Lithium diffusion in polyether ether ketone and polyimide stimulated by in situ electron irradiation and studied by the neutron depth profiling method

    Science.gov (United States)

    Vacik, J.; Hnatowicz, V.; Attar, F. M. D.; Mathakari, N. L.; Dahiwale, S. S.; Dhole, S. D.; Bhoraskar, V. N.

    2014-10-01

    Diffusion of lithium from a LiCl aqueous solution into polyether ether ketone (PEEK) and polyimide (PI) assisted by in situ irradiation with 6.5 MeV electrons was studied by the neutron depth profiling method. The number of the Li atoms was found to be roughly proportional to the diffusion time. Regardless of the diffusion time, the measured depth profiles in PEEK exhibit a nearly exponential form, indicating achievement of a steady-state phase of a diffusion-reaction process specified in the text. The form of the profiles in PI is more complex and it depends strongly on the diffusion time. For the longer diffusion time, the profile consists of near-surface bell-shaped part due to Fickian-like diffusion and deeper exponential part.

  18. Hepatitis A in Poland in 2014

    Science.gov (United States)

    Polański, Piotr

    The aim of this article is to assess the epidemiological situation of hepatitis A in Poland in 2014 with the regard to the recent years. The assessment was conducted based on the results of the analysis of data from the bulletins “Infectious diseases and poisonings in Poland in 2014” and “Vaccinations in Poland in 2014”, as well as information from the individual cases questionnaires and reports of epidemiological investigations in outbreaks of hepatitis A, submitted by the sanitary-epidemiological stations to the Department of Epidemiology in NIPH-NIH. In 2014 in Poland there were 76 cases of hepatitis A registered. Incidence per 100 000 inhabitants was 0.20, and in different voivodeships varied from 0.07 (in Dolnosląskie voivodeship) to 0.30 (in Małopolskie voivodeship). The incidence among male and female did not differ (and was 0.20/ 100 000). In 2014 despite the increase in the number of cases (comparing it to the previous year) no significant change in epidemiological situation of hepatitis A was observed. Poland is still regarded as a country of low endemicity of hepatitis A. In routine surveillance system there is no information concerning the professional affiliation of persons being vaccinated, whereas the vaccinations themselves are recommended in the Polish vaccination schedule. Particular attention should be directed towards the vaccinations of persons who take part in berries primal production, product of which Poland is a major exporter of in the EU. In the light of increasing number of international hepatitis A outbreaks (which could be characterized by the prolonged duration, as well as the high possibility of secondary cases appearing- especially in countries of low endemicity) the maintenance of high level routine surveillance in Poland gains importance. The latter could also contribute to the efficiency of epidemiological investigations in multistate outbreaks.

  19. New Vary-Chap Profile of the Topside Ionosphere Electron Density Distribution for use with the IRI Model and the GIRO Real-Time Data

    Science.gov (United States)

    Nsumei, Patrick; Reinisch, Bodo W.; Huang, Xueqin; Bilitza, Dieter

    2012-01-01

    A new Vary-Chap function is introduced for the empirical modeling of the electron density N(h) profile in the topside ionosphere that uses a shape function S(h) in the generalized Chapman function. The Vary-Chap profile extends the bottomside profile that is specified by the IRI model or measured by the Global Ionospheric Radio Observatory (GIRO) to the altitude of the ISIS-2 satellite. Some 80,000 topside profiles, measured by the topside sounder on the ISIS-2 satellite were analyzed, and the shape function S(h) was calculated for each profile. A parameterized function S*(h), composed of two sub-functions S1(h) and S2(h), is fitted to the measured S(h) profile using three free parameters. At altitudes just above the F2 layer peak height hmF2, the shape function S1 controls S(h), and at greater altitudes S2 controls S(h). The height of the intersection of S1 and S2 is defined as the transition height h(sub T) indicating the transition from an O(+) to an H(+)-dominated profile shape. The observed transition heights range from approx.500 km to 800 km.

  20. Residential Electricity Consumption in Poland

    Directory of Open Access Journals (Sweden)

    Edyta Ropuszyńska-Surma

    2016-01-01

    Full Text Available Key factors influencing electricity consumption in the residential sector in Poland have been identified. A fixed-effects model was used, which includes time effects, and a set of covariates, based on the model developed by Houthakker et al. This model estimates electricity demand by using lagged values of the dependent variable along with current and lagged values of electricity prices, and other variables that affect electricity demand such as: population, economic growth, income per capita, price of related goods, etc. The model has been identified according to the research results of the authors and those obtained by Bentzen and Engsted. The set of covariates was extended to the lagged electricity price given by a tariff (taken from two years previous to the time of interest and heating degree days index, a very important factor in European Union countries, where the climate is temperate. The authors propose four models of residential electricity demand, for which a confidence interval of 95% has been assumed. Estimation was based on Polish quarterly data for the years 2003-2013. (original abstract

  1. Depth-Profiling Electronic and Structural Properties of Cu(In,Ga)(S,Se)2 Thin-Film Solar Cell.

    Science.gov (United States)

    Chiang, Ching-Yu; Hsiao, Sheng-Wei; Wu, Pin-Jiun; Yang, Chu-Shou; Chen, Chia-Hao; Chou, Wu-Ching

    2016-09-14

    Utilizing a scanning photoelectron microscope (SPEM) and grazing-incidence X-ray powder diffraction (GIXRD), we studied the electronic band structure and the crystalline properties of the pentanary Cu(In,Ga)(S,Se)2 (CIGSSe) thin-film solar cell as a function of sample depth on measuring the thickness-gradient sample. A novel approach is proposed for studying the depth-dependent information on thin films, which can provide a gradient thickness and a wide cross-section of the sample by polishing process. The results exhibit that the CIGSSe absorber layer possesses four distinct stoichiometries. The growth mechanism of this distinctive compositional distribution formed by a two-stage process is described according to the thermodynamic reaction and the manufacturing process. On the basis of the depth-profiling results, the gradient profiles of the conduction and valence bands were constructed to elucidate the performance of the electrical properties (in this case, Voc = 620 mV, Jsc = 34.6 mA/cm(2), and η = 14.04%); the valence-band maxima (VBM) measured with a SPEM in the spectroscopic mode coincide with this band-structure model, except for a lowering of the VBM observed in the surface region of the absorber layer due to the ordered defect compound (ODC). In addition, the depth-dependent texturing X-ray diffraction pattern presents the crystalline quality and the residual stress for each depth of a thin-film device. We find that the randomly oriented grains in the bottom region of the absorber layer and the different residual stress between the underlying Mo and the absorber interface, which can deteriorate the electrical performance due to peeling-off effect. An anion interstitial defect can be observed on comparing the anion concentration of the elemental distribution with crystalline composition; a few excess sulfur atoms insert in interstitial sites at the front side of the absorber layer, whereas the interstitial selenium atoms insert at the back side.

  2. Russia and Poland: Problems of Inevitable Coexistence

    Directory of Open Access Journals (Sweden)

    Dmitriy V. Ofitserov-Belskiy

    2014-01-01

    Full Text Available Over the last quarter of the century relations between Russia and Poland are balancing between trying to understand the burden of mutual guilt and a desire to construct non-emotional pragmatic relations. Sources of tension vary. In particular, it is the desire of Poland to position itself as a valued player in NATO and the EU and the role distance between the two countries in IR system, which does not allow Russia to maintain an equal political dialogue with Poland. In fact, Poland is not afraid of a direct threat from Russia, but the worst scenario is the one in which Russia without changing the content of its imperial policy can be accepted as a full partner in the international community. The evolution of Russian statehood and national specifics of democracy is largely determined the assessment of the prospects of Russian politics in Poland. The mistake of Polish diplomacy last years was that it took no direct efforts to improve relations with Russia, but only tried to impose the dialogue on Russian authorities. Diplomatic methods were designed to hurt Russian interests and to create a topic for discussion. In response, after 2006 Russia chose the tactic of ignoring Poland. But, ignoring Polish authorities, Russian politicians acted similarly with other political forces. In Poland among influential political forces, there was and there is still no loyalty to Russia. For Russian interests it is no matter who are or will be in power in Poland. However as a rule, it is an important factor that foreign policy decisions are de facto within the competences of the President and the government, as well as experiencing a significant influence of the parliamentary forces. Recent trends show no tangible innovations in bilateral programme. But innovations appear in multilateral and conflict enough issues, such as deployment of US missile defense system in Poland or Polish supervision of "Eastern Partnership" programme. The main problem is low self

  3. Wind energy development as a part of Poland's industrial development

    DEFF Research Database (Denmark)

    Stoerring, Dagmara; Hvelplund, Frede Kloster

    2003-01-01

    The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

  4. Practical Development of Modern Mass Media Education in Poland

    Science.gov (United States)

    Fedorov, Alexander

    2012-01-01

    Practical development of modern mass media education in Poland. The paper analyzes the main ways of practical development of modern media education (1992-2012 years) in Poland: basic technologies, main events, etc.

  5. New and interesting records of freshwater Verrucaria in Central Poland

    Directory of Open Access Journals (Sweden)

    Beata Krzewicka

    2013-12-01

    Full Text Available Verrucaria madida is reported as new to Poland. Three other associated species, V. aquatilis, V. hydrela and V. rheitrophila, are compared. The known distribution in Poland and the ecology of these freshwater species are presented.

  6. IS INLAND SHIPPING NEEDED IN POLAND?

    Directory of Open Access Journals (Sweden)

    Ryszard Rolbiecki

    2014-06-01

    Full Text Available In Poland, inland shipping plays only a mariginal role in transport needs fulfillment. Inland shipping has a share of mere 0,3% in goods transport modal split. The reason for this is poor and variable technical parameters of inland waterways together with adverse legal regulations. Different situation takes place in Western European countries, in which the development of this mode of transport is viewed as a way of road transport develop-ment restraint. In Poland, the need to move some of the volume from road transport to in-land shipping is specifically observed within marine ports surroundings. Because of their complex nature, the investments in inland shipping infrastructure would also be helpful in solving the current problems of water management. Inland waterways in Poland guaran-tee neither an adequate level of flood protection, nor the water needs fulfillment of do-mestic economy. When it comes to water reserves, Poland is one of the most deficient countries in Europe. Thus there is a need to invest in inland waterways in Poland.

  7. Interdiffusion in epitaxial, single-crystalline Au/Ag thin films studied by Auger electron spectroscopy sputter-depth profiling and positron annihilation

    International Nuclear Information System (INIS)

    Noah, Martin A.; Flötotto, David; Wang, Zumin; Reiner, Markus; Hugenschmidt, Christoph; Mittemeijer, Eric J.

    2016-01-01

    Interdiffusion in epitaxial, single-crystalline Au/Ag bilayered thin films on Si (001) substrates was investigated by Auger electron spectroscopy (AES) sputter-depth profiling and by in-situ positron annihilation Doppler broadening spectroscopy (DBS). By the combination of these techniques identification of the role of vacancy sources and sinks on interdiffusion in the Au/Ag films was possible. It was found that with precise knowledge of the concentration-dependent self-diffusion and impurity diffusion coefficients a distinction between the Darken-Manning treatment and Nernst-Planck treatment can be made, which is not possible on the basis of the determined concentration-depth profiles alone.

  8. Confessional and catechetical nature of religious education in Poland

    Directory of Open Access Journals (Sweden)

    Paweł Mąkosa

    2015-09-01

    Full Text Available This paper aims at bringing to light a presentation of the nature of religious education in Poland. This study will therefore present a brief historical outline of religious upbringing in Poland, its current organisational regulations and the principles of religious education in schools. In our summary, we will present the level of effectiveness of religious education in Poland, and we will also explore the discussion on the reformation of religious education in Poland which is being worked upon.

  9. Epidemiological characteristics of Salmonella Typhimurium isolated from animals and feed in Poland

    DEFF Research Database (Denmark)

    Wasyl, D.; Sandvang, D.; Skov, M. N.

    2006-01-01

    of XbaI and BlnI digest showed high genomic similarity between the strains and confirmed clonal spread of S. Typhimurium infections. Plasmid profiling allowed further differentiation of the strains. We have, therefore, confirmed the appearance of S. Typhimurium DT104 showing genome integrated integron......-mediated antimicrobial resistance in Poland. These findings are significant for public and animal health risks and document the dissemination of DT104 epidemic strains into new geographical regions....

  10. POLAND AND TRANSATLANTIC SECURITY - AN ENDURING ATLANTICIST?

    Directory of Open Access Journals (Sweden)

    Kerry Longhurst

    2005-07-01

    Full Text Available Throughout the 1990’s Poland pursued a security policy steered by Atlanticism and a close bond with the United States. Atlanticism shaped Warsaw’s choices on all key security issues during the past decade, but became particularly apparent after 9/11 when Poland lent its full support to the US-led war on terror. Whilst membership in the EU will affect the priorities and conduct of Polish security policy, it is argued here that the deep-seated nature of Atlanticism in Polish strategic culture , together with the broader implications of enlargement upon the EU’s foreign policy ambitions will ensure that Poland will remain a keen Atlanticist in the New Europe.

  11. Economic costs of electricity production in Poland

    International Nuclear Information System (INIS)

    Beeldman, M.; Solinski, J.

    1994-02-01

    This study presents a methodology for the calculation of the economic costs of the production of electricity. This methodology is applied to assess electricity production cost in Poland by type of power station for the years 1995 and 2000. In addition, an overview is presented of the methods used by the OECD countries, particularly in the Netherlands. The main conclusions of the study are: 1) the real economic costs to generate electricity in Poland are about two times higher compared with the traditional book-keeping data; 2) the investment costs will become the most important cost component in the near future; and 3) there are considerables differences in production cost per kWh for the different types of power plants in Poland. 4 appendices, 14 refs

  12. Poland wants to thwart Russian gas

    International Nuclear Information System (INIS)

    Barbaux, Aurelie

    2013-01-01

    The Polish authorities are doing everything in their power to block Nord Stream 2, the Russian natural gas pipeline project that will double (by 2019) Nord Stream 1 through the Baltic Sea. Gazprom's Nord Stream 2 (in which European companies such as Engie (France), Uniper and Wintershall (Germany), OMV (Austria) and Shell are involved) will poses a risk, according to Poland, to the gas supply of central European countries (and notably Ukraine). Poland also intends to stop all its gas imports from Russia after 2022 (end of the Yamal contract): the country is therefore developing its capacity to increase its own natural gas production and has just inaugurated a liquefied natural gas terminal on the Baltic Sea. A gas pipeline is also in project, that will link Norway to Poland. For power generation, the nuclear energy option is also studied

  13. History of pediatric neurology in Poland.

    Science.gov (United States)

    Steinborn, Barbara; Józwiak, Sergiusz

    2010-02-01

    This review presents the past and the present of pediatric neurology in Poland. Pediatric neurology has its roots in Polish general neurology represented by many outstanding scientists. The founder of Polish school of neurology at the end of 19th century was Edward Flatau, known as the author of Flatau's law. The most famous Polish neurologist was Joseph Babiński, recognized for the first description of pathological plantar reflex. First Polish publication related to child neurology was Brudziński's report on a new meningeal symptom (the flexion of lower limbs during passive neck flexion with pain in neck). Contemporary child neurology in Poland was created by Professor Zofia Majewska after the Second World War. Now 10 academic centers of child neurology exist in Poland fulfilling educational, scientific, and therapeutic roles. Polish Society of Child Neurology was established in 1991 and now there are about 580 members, including 300 child neurologists.

  14. Approaches to Sustainable Development in Poland

    International Nuclear Information System (INIS)

    Kostrzewa, Karina; ); Piasecki, Ryszard

    2009-01-01

    The sustainable development principle was introduced into the legal system of Poland when the Constitution of the Polish Republic was adopted in 1997. Paradoxically, in Poland - one of the few countries in the world which have introduced the concept of sustainable development at the level of the Constitution, it is difficult to find a reference to it in the political debate. The national sustainable development strategy Poland 2025 has met no response among society and today it seems to be hardly remembered by anybody. An average citizen does not know the concept of sustainable development, or has a vague notion of it, often identifying it exclusively with environmental protection. Solving social problems (the labour market, education, health protection, equality of the sexes, etc.) is not associated with sustainable development whatsoever, and neither is engagement into achieving these development targets on the global scale

  15. Determination of the thickness distribution of a graphene layer grown on a 2″ SiC wafer by means of Auger electron spectroscopy depth profiling

    International Nuclear Information System (INIS)

    Kotis, L.; Gurban, S.; Pecz, B.; Menyhard, M.; Yakimova, R.

    2014-01-01

    Highlights: • The thickness of graphene grown on SiC was determined by AES depth profiling. • The AES depth profiling verified the presence of buffer layer on SiC. • The presence of unsaturated Si bonds in the buffer layer has been shown. • Using multipoint analysis thickness distribution of the graphene on the wafer was determined. - Abstract: Auger electron spectroscopy (AES) depth profiling was applied for determination of the thickness of a macroscopic size graphene sheet grown on 2 in. 6H-SiC (0 0 0 1) by sublimation epitaxy. The measured depth profile deviated from the expected exponential form showing the presence of an additional, buffer layer. The measured depth profile was compared to the simulated one which allowed the derivation of the thicknesses of the graphene and buffer layers and the Si concentration of buffer layer. It has been shown that the graphene-like buffer layer contains about 30% unsaturated Si. The depth profiling was carried out in several points (diameter 50 μm), which permitted the constructing of a thickness distribution characterizing the uniformity of the graphene sheet

  16. Comparison of electron density profiles observed in China's low latitude station with that produced by the International Reference Ionosphere (IRI2001)

    International Nuclear Information System (INIS)

    Zhang Manlian; Shi Jiankui; Wang Xiao

    2003-01-01

    One month's data of ionograms observed by DPS-4 digisonde in China's low latitude station Hainan (19.4 deg N/109.0 deg E) for the high solar activity year 2002 is used to make a comparison study between the observational electron density profiles and that produced by the newly updated International Reference Ionosphere (IRI2001). The present study showed that for the month studied (April, 2002): (1) When B0-Tab value is used, profiles given by IRI2001 are in poor agreement with the observational results during daytime and nearby midnight hours when standard Ne(h) option is chosen, whereas when the LAY functions version is chosen, IRI2001 produces profiles with erroneous features during evening and nighttime hours, although it produces profiles in a reasonable good agreement with the observational ones during daytime hours. (2) In general, profiles produced by IRI2001 with B0-Gulyaeva choice is in better agreement with observational profiles than when B0-Tab is chosen. When the B0-Gulyaeva and LAY functions version of Ne(h) are both chosen, IRI2001 produced the best results when compared with the observational results. (3) The B0 parameter given by B0-Gulyaeva choice in IRI2001 is much closer to the observed (best fitted) one than that given by the B0-Tab choice is. (author)

  17. Odor Profile of Different Varieties of Extra-Virgin Olive Oil During Deep Frying Using an Electronic Nose and SPME-GC-FID

    Science.gov (United States)

    Messina, Valeria; Biolatto, Andrea; Sancho, Ana; Descalzo, Adriana; Grigioni, Gabriela; de Reca, Noemí Walsöe

    2011-09-01

    The aim of the performed work was to evaluate with an electronic nose changes in odor profile of Arauco and Arbequina varieties of extra-virgin olive oil during deep-frying. Changes in odor were analyzed using an electronic nose composed of 16 sensors. Volatile compounds were analyzed by SPME-GC-FID. Principal Component Analysis was applied for electronic results. Arauco variety showed the highest response for sensors. Statistical analysis for volatile compounds indicated a significant (P<0.001) interaction between variety and time of frying processes. Arauco variety showed the highest production of volatile compounds at 60 min of deep frying. The two varieties presented distinct patterns of volatile products, being clearly identified with the electronic nose.

  18. Chernobyl 90Sr in bilberries from Poland

    International Nuclear Information System (INIS)

    Mietelski, J.W.; Vajda, N.

    1997-01-01

    As part of a detailed survey on the contamination of Polish forests 90 Sr activity concentrations were determined in bilberries. Elevated 90 Sr levels were found in several samples from north-eastern Poland. The calculated maximum 90 Sr surface contamination was 2 kBq*m -2 . The correlation between 90 Sr and 137 Cs concentrations in bilberries was good for two sets of samples originating from two geographical areas of Poland indicating the local differences in radionuclide depositions from Chernobyl fallout. (author)

  19. Online Political Campaigning during the 2014 Regional Elections in Poland

    Directory of Open Access Journals (Sweden)

    Paweł Baranowski

    2015-12-01

    Full Text Available This article is dedicated to the analysis and evaluation of political communication on a regional level. Without any doubt, the Internet revolution affected electoral campaigning on every level. Online campaigning before local elections is often marginalized by political scientists and other scholars researching political marketing. However, the question emerges: are the candidates aware of the possibilities that new media has brought to political communication? Content analysis of all the major online communication tools has allowed the author to analyze the patterns of using websites, official Facebook profiles and Twitter accounts of candidates during the 2014 Lower Silesian Regional assembly elections. The Lower Silesian Voivodeship is among the fastest developing regions in Poland with high Internet penetration rate. Is the Internet campaign treated as a second-class way to communicate with potential voters, or is it perceived as an opportunity to reach electorate online?

  20. Observation of dopant-profile independent electron transport in sub-monolayer TiO{sub x} stacked ZnO thin films grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Saha, D., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Misra, P., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Joshi, M. P.; Kukreja, L. M. [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India); Das, Gangadhar [Indus Synchrotrons Utilisation Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India)

    2016-01-18

    Dopant-profile independent electron transport has been observed through a combined study of temperature dependent electrical resistivity and magnetoresistance measurements on a series of Ti incorporated ZnO thin films with varying degree of static-disorder. These films were grown by atomic layer deposition through in-situ vertical stacking of multiple sub-monolayers of TiO{sub x} in ZnO. Upon decreasing ZnO spacer layer thickness, electron transport smoothly evolved from a good metallic to an incipient non-metallic regime due to the intricate interplay of screening of spatial potential fluctuations and strength of static-disorder in the films. Temperature dependent phase-coherence length as extracted from the magnetotransport measurement revealed insignificant role of inter sub-monolayer scattering as an additional channel for electron dephasing, indicating that films were homogeneously disordered three-dimensional electronic systems irrespective of their dopant-profiles. Results of this study are worthy enough for both fundamental physics perspective and efficient applications of multi-stacked ZnO/TiO{sub x} structures in the emerging field of transparent oxide electronics.

  1. Analysis of a Novel Diffractive Scanning-Wire Beam Position Monitor (BPM) for Discriminative Profiling of Electron Vs. X Ray Beams

    International Nuclear Information System (INIS)

    Tatchyn, R.

    2011-01-01

    Recent numerical studies of Free Electron Lasers (FELs) operating in the Self Amplified Spontaneous Emission (SASE) regime indicate a large sensitivity of the gain to the degree of transverse overlap (and associated phase coherence) between the electron and photon beams traveling down the insertion device. Simulations of actual systems imply that accurate detection and correction for this relative loss of overlap, rather than correction for the absolute departure of the electron beam from a fixed axis, is the preferred function of an FEL amplifier's Beam Position Monitor (BPM) and corrector systems. In this note we propose a novel diffractive BPM with the capability of simultaneously detecting and resolving the absolute (and relative) transverse positions and profiles of electron and x-ray beams co-propagating through an undulator. We derive the equations governing the performance of the BPM and examine its predicted performance for the SLAC Linac Coherent Light Source (LCLS), viz., for profiling multi-GeV electron bunches co-propagating with one-to-several-hundred keV x-ray beams. Selected research and development (r and d) tasks for fabricating and testing the proposed BPM are discussed.

  2. Electronics

    Science.gov (United States)

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  3. Assessment of the waste electrical and electronic equipment management systems profile and sustainability in developed and developing European Union countries.

    Science.gov (United States)

    Ibanescu, Dumitrita; Cailean Gavrilescu, Daniela; Teodosiu, Carmen; Fiore, Silvia

    2018-03-01

    The assessment of waste management systems for electrical and electronic equipment (WEEE) from developed economies (Germany, Sweden and Italy) and developing countries (Romania and Bulgaria), is discussed covering the period 2007-2014. The WEEE management systems profiles are depicted by indicators correlated to WEEE life cycle stages: collection, transportation and treatment. The sustainability of national WEEE management systems in terms of greenhouse gas emissions is presented, together with the greenhouse gas efficiency indicator that underlines the efficiency of WEEE treatment options. In the countries comparisons, the key elements are: robust versus fragile economies, the overall waste management performance and the existence/development of suitable management practices on WEEE. Over the life cycle perspective, developed economies (Germany, Sweden and Italy) manage one order of magnitude higher quantities of WEEE compared to developing countries (Romania and Bulgaria). Although prevention and reduction measures are encouraged, all WEEE quantities were larger in 2013, than in 2007. In 2007-2014, developed economies exceed the annual European collection target of 4 kg WEEE/capita, while collection is still difficult in developing countries. If collection rates are estimated in relationship with products placed on market, than similar values are registered in Sweden and Bulgaria, followed by Germany and Italy and lastly Romania. WEEE transportation shows different patterns among countries, with Italy as the greatest exporter (in 2014), while Sweden treats the WEEE nationally. WEEE reuse is a common practice in Germany, Sweden (from 2009) and Bulgaria (from 2011). By 2014, recycling was the most preferred WEEE treatment option, with the same kind of rates performance, over 80%, irrespective of the country, with efforts in each of the countries in developing special collection points, recycling facilities and support instruments. The national total and the

  4. Illegality of international population movements in Poland.

    Science.gov (United States)

    Okolski, M

    2000-01-01

    Until the beginning of the 1990s Poland did not receive foreign migrants. Thereafter, the situation changed dramatically. A large part of the inflow proved to be illegal migrants, many of whom were in transit to Western Europe. Although these movements gradually declined in the second half of the decade, some became increasingly identified with relatively sophisticated smuggling of people. Foreigners smuggled from the South to the West, together with the international criminal networks assisting them, became typical of the migratory movements of people in Central and Eastern Europe during the 1990s. This article seeks to describe illegal migration from the perspective of Poland, a country often perceived as a major transit area in the smuggling of persons to Western Europe. The conclusions draw on the findings of several surveys recently carried out in Poland. Basic concepts related to illegal migration are defined and juxtaposed, and various myths and stereotypes concerning it that most often stem from the paucity of empirical evidence are examined. Finally, the trends observed in Poland are interpreted within the larger context of contemporary European migration.

  5. [Poland: cholera to typhus, 1831-1950].

    Science.gov (United States)

    Balinska, M A

    1999-12-01

    In this article devoted to Poland's direct and indirect role in the elaboration of contemporary international health structures and to her reputation as an epidemic reservoir of Europe, we consider how Poland came to be perceived as the cordon sanitaire of the West. Traditionally seen as upholding Western values, in the 19th and 20th centuries the country became increasingly associated with "Eastern plagues"-cholera and then typhus-coming from Russia and which could spread to the rest of Europe if Poland did not manage to contain them. When Poland was reconstituted as a nation-state in 1918, the new country won international recognition through her successful attempts to contain a typhus epidemic sweeping westwards from Russia. The Polish government convened the first European, League sponsored, health conference following the First World War. A Polish doctor, L. RAJCHMAN, was chosen to head up the League of Nations Health Organisation (forerunner of the WHO) and later (1946) founded UNICEF. Finally, we examine the key issue of exanthematous typhus in both world wars, exemplifying how a disease can come to be "ideologized", in this case by Nazi Germany. Typhus was the pretext used- in the name of "public health"-for segregating Polish citizens of Jewish origin and even killing them. Paradoxically, typhus was in the process of being eradicated when the war began and German policy of mass resettlements, sequestration, and starvation only spurred the epidemic they supposedly wished to control.

  6. Fruits contamination in Poland after Chernobyl accident

    International Nuclear Information System (INIS)

    Kubik, M.; Michalczuk, L.; Dzieciol, U.; Bem, H.; Kusmierek, E.

    1996-01-01

    The content of Cs 137, Cs 134 and Ru 106 have been measured in samples of different fruits, mushrooms and honey taken from many farms selected at whole territory of Poland. The research has been carried out during the period of 1986-1991. The soils contamination in farms and forests area has been also done. 2 figs, 2 tabs

  7. Control of rabbit myxomatosis in Poland.

    Science.gov (United States)

    Górski, J; Mizak, B; Chrobocińska, M

    1994-09-01

    The authors present an epizootiological analysis of myxomatosis in Poland. The biological, physical and chemical properties of virus strains used for the production and control of 'Myxovac M' vaccine are discussed. The long-term stability, safety and efficacy of the vaccine are demonstrated. Laboratory experiments were confirmed in large-scale field observations.

  8. Rare and new Laboulbeniales from Poland. X

    Directory of Open Access Journals (Sweden)

    Tomasz Majewski

    2014-08-01

    Full Text Available In a consecutive paper in the series concerning Polish Laboulbeniales, several species new for Poland are reported. Similarly as in the earlier papers of this series, all specimens were found by the author (if not otherwise indicated. The specimens are kept in the author's collection at the Mycology Laboratory of the Institute of Botany, Polish Academy of Sciences, Warsaw.

  9. Post-accession economic development of Poland

    Directory of Open Access Journals (Sweden)

    Witold ORŁOWSKI

    2011-12-01

    Full Text Available The aim of this paper is to analyse the economic performance of Poland in the post-accession period. Poland joined the EU in 2004, after a long and difficult economic transition. The whole post-accession period could be divided into two sub-periods: the pre-crisis period of 2004-07, and the turbulent period of 2008-11. During the pre-crisis period, Poland recorded a fast growth, with a built-up of macroeconomic disequilibria. During the turbulent period, the economy was dealing successfully with the global financial crisis. The growth slowed down and the disequilibria were reduced. The paper discusses the growth patterns in the both sub-periods and tries to explain the factors that contributed to the good economic performance during the financial crisis. The astonishingly good economic growth results cannot be attributed to a single factor, but to a combination of many factors contributing at the same time. However, Poland has many valuable assets that may help in dealing with the further economic turbulences.

  10. Agrocybe putaminum (Agaricales, Basidiomycota, New for Poland

    Directory of Open Access Journals (Sweden)

    Halama Marek

    2016-12-01

    Full Text Available Agrocybe putaminum (Maire Singer, a species hitherto unknown in Poland, is reported from two localities in the southwestern part of the country, with descriptions and illustrations of the morphological characters of the newly collected basidiomata. The delimitation of A. putaminum is briefly discussed, and information on the ecology of the fungus and its world distribution is provided.

  11. Species diversity of Trichoderma in Poland

    Science.gov (United States)

    Fifteen species of Trichoderma were identified from among 118 strains originating from different regions and ecological niches in Poland. This low number indicates low species diversity of Trichoderma in this Central European region. Using the ITS1-ITS2 regions, 64 strains were positively identified...

  12. Soil fauna research in Poland: earthworms (Lumbricidae

    Directory of Open Access Journals (Sweden)

    Pączka Grzegorz

    2015-06-01

    Full Text Available Living organisms are the foundation of ecosystem services. Of particular notice is zooedaphone, often underestimated and basically unknown to the general public. The present review summarizes the current state of knowledge related to earthworms occurring in natural and anthropogenically altered habitats in Poland, in the context of the requirement for protection of soil biodiversity.

  13. Determinants of all cause mortality in Poland.

    Science.gov (United States)

    Genowska, Agnieszka; Jamiołkowski, Jacek; Szpak, Andrzej; Pajak, Andrzej

    2012-01-01

    The study objective was to evaluate quantitatively the relationship between demographic characteristics, socio-economic status and medical care resources with all cause mortality in Poland. Ecological study was performed using data for the population of 66 subregions of Poland, obtained from the Central Statistical Office of Poland. The information on the determinants of health and all cause mortality covered the period from 1st January 2005 to 31st December 2010. Results for the repeated measures were analyzed using Generalized Estimating Equations GEE model. In the model 16 independent variables describing health determinants were used, including 6 demographic variables, 6 socio-economic variables, 4 medical care variables. The dependent variable, was age standardized all cause mortality rate. There was a large variation in all cause mortality, demographic features, socio-economic characteristics, and medical care resources by subregion. All cause mortality showed weak associations with demographic features, among which only the increased divorce rate was associated with higher mortality rate. Increased education level, salaries, gross domestic product (GDP) per capita, local government expenditures per capita and the number of non-governmental organizations per 10 thousand population was associated with decrease in all cause mortality. The increase of unemployment rate was related with a decrease of all cause mortality. Beneficial relationship between employment of medical staff and mortality was observed. Variation in mortality from all causes in Poland was explained partly by variation in socio-economic determinants and health care resources.

  14. Wind energy market study Eastern Europe. Poland

    International Nuclear Information System (INIS)

    Skjerk Christensen, P.

    1994-04-01

    The main objective of the THERMIE Associated Measure WE05 is to study market conditions and estimate the market for wind power in Eastern Europe. This report describes the results of a study of the conditions in Poland, which has been concentrated on the following areas: wind energy potential in Poland; data concerning the present structure of the power production system including costs; payback prices, subsidies, etc. with relation to renewable energy sources, especially wind power; information on existing wine turbines and their production in Poland; possibilities for co-production of wind turbines by Polish and EC factories, and rules and legislation pertaining to the establishment of wind turbines and to power production by wind, eg regulations related to grid connection, safety and environment. According to existing data there are possibilities for using the wind potential in certain parts of poland. The wind data have to be improved if particular sites are considered for wind parks. The current official plans concerning the energy system have taken renewable sources into consideration, including wind power that is estimated to contribute ∼ 1 GWh by 2005-2010. Wind turbines may be connected to the public grid with due regard to the strength of the line. Presently, the owner has to pay all the costs, however, new rules are under consideration. The conditions for the connection and operation of wind turbines have to be discussed with the particular utility on an an-hoc basis. (EG)

  15. Museums in Cultural Tourism in Poland

    OpenAIRE

    Krakowiak, Beata

    2014-01-01

    The article presents the museums, their potential and their significance for cultural tourism in Poland. Its aims are achieved through a presentation of registered national museums, ‘monuments of history’, museum buildings and the cultural activities undertaken by these institutions

  16. Assessment of atmosphere degradation step in Poland

    International Nuclear Information System (INIS)

    Skrzypski, J.

    1992-01-01

    This paper presents characterization of the state of air pollution in Poland. It describes the size of emission and the size of concentration of dust and SO 2 and NO x pollution. It compares ascertained size of pollution the permissible concentration. It calls special attention to spatial differentiation of state of air pollution. (author). 26 refs

  17. Average profiles of the solar wind and outer radiation belt during the extreme flux enhancement of relativistic electrons at geosynchronous orbit

    Directory of Open Access Journals (Sweden)

    R. Kataoka

    2008-06-01

    Full Text Available We report average profiles of the solar wind and outer radiation belt during the extreme flux enhancement of relativistic electrons at geosynchronous orbit (GEO. It is found that seven of top ten extreme events at GEO during solar cycle 23 are associated with the magnetosphere inflation during the storm recovery phase as caused by the large-scale solar wind structure of very low dynamic pressure (<1.0 nPa during rapid speed decrease from very high (>650 km/s to typical (400–500 km/s in a few days. For the seven events, the solar wind parameters, geomagnetic activity indices, and relativistic electron flux and geomagnetic field at GEO are superposed at the local noon period of GOES satellites to investigate the physical cause. The average profiles support the "double inflation" mechanism that the rarefaction of the solar wind and subsequent magnetosphere inflation are one of the best conditions to produce the extreme flux enhancement at GEO because of the excellent magnetic confinement of relativistic electrons by reducing the drift loss of trapped electrons at dayside magnetopause.

  18. Fluorescent halite from Bochnia salt mine, Poland

    Science.gov (United States)

    Waluś, Edyta; Głąbińska, Dobrochna; Puławska, Aleksandra; Flasza, Michał; Manecki, Maciej

    2016-04-01

    The photoluminescence of selected halite crystals from Bochnia Salt Mine (Bochnia, Poland) were discovered in 2014. This is a result of contemporary precipitation from percolating waters. In most cases the fluorescence is observed in whole crystals or in zones of crystals. Only clear parts of transparent crystals are orange-red fluorescent in short UV light (320 nm). Chemical microanalysis by scanning electron microscopy/energy dispersive spectroscopy SEM/EDS indicates that this is activated by Mn and Pb. The concentration of Mn is similar in fluorescent and inactive salt and equals to 0.13 - 0.27 wt.%. The concentration of Pb, however, averages to 3.8 wt.% in fluorescent parts reaching only 1.9 wt.% elsewhere. There is no difference in the unit cell parameters determined by powder X-ray diffraction. The percolating waters contain some Mn (ca. 3.9 ppm) but the concentration of Pb is below the detection limits. The experiments of precipitation of halite from the solutions containing various concentrations of Mn and Pb were performed to simulate this fenomenon using solutions containing: 1 mg Pb/L and 80 mg Mn/L; 1 mg Pb/L and 0.8 mg Mn/L; 1 mg Pb/L and 0.6 mg Mn/L; and 0 mg Pb/L and 80 mg Mn/L. The results indicate that fluorescence is apparent when halite forms from solutions containing more than 0.8 mg Mn/L and more than 1 mg Pb/L. The presence of lead as co-activator is necessary requirement: Mn alone does not activate the fluorescence of halite. This is in accordance with the results of previous work (Murata et al., 1946; Sidike et al., 2002). Rock salt in the mine does not show fluorescence at all. Fluorescence of contemporary salt in Bochnia salt mine is a result of mining activity and slight, sporadic contamination with traces of Mn and Pb. This work is partially funded by AGH research grant no 11.11.140.319. Murata K. J., Smith R. L., 1946. Manganese and lead as coactivators of red fluorescence in halite, American Mineralogist, Volume 31, pages 527

  19. Simulation of Electron Beam Trajectory of Thermionic Electron Gun Type with Pierce Electrode

    International Nuclear Information System (INIS)

    Suprapto; Djoko-SP; Djasiman

    2000-01-01

    The simulation of electron beam trajectory for electron gun of electron beam machine has been done. The simulation is carried out according to mechanical design of the electron gun. The simulation is carried out by using the software made by Andrzej Soltan Institute for Nuclear Studies, Swierk-Poland. The result obtained from simulation is approximately parallel electron beam trajectory of 20 mA beam current at 0.66 kV anode voltage, 15 mm cathode-anode distance and 67.5 o cathode angle. Arrangement of electron gun and accelerating tube with 15 kV voltage between anode and the first electrode of accelerating tube yields focus distance of 34 mm from the to cathode. To obtain the approximately parallel beam trajectory which has -0.03 o entrance angles to accelerating tube, the suitable cathode-anode voltage is 12.66 kV. With the entrance angle of -0.03 o it is expected that the electron beam can be accelerated and the beam profile has a small divergence after passing the accelerating tube. (author)

  20. The Welfare of Bears in Zoos: A Case Study of Poland.

    Science.gov (United States)

    Maślak, Robert; Sergiel, Agnieszka; Bowles, David; Paśko, Łukasz

    2016-01-01

    The welfare of captive bears became a big issue of concern in Poland when a case of a bear being ill-treated became a high-profile case in the media. This case created a challenge to verify, study, and understand the main problems associated with bear keeping so that zoos could significantly improve the conditions in which they keep bears or ensure they keep bears at the minimum required standards. The results presented here are from 1 of the few countrywide studies of captive bear conditions conducted in all the captive institutions in Poland that keep bears. Thirteen institutions kept bears at the time of the study (2007-2009), including 54 individuals of 5 species. Major welfare problems were identified, and the results have been used to challenge zoos to address the changes required and focus the government's attention on areas that require legislative improvement.

  1. PRESENT STATUS OF MEDICAL EDUCATION IN POLAND.

    Science.gov (United States)

    SELZER, A

    1965-04-01

    In the past few years medical education in Poland has undergone considerable change, particularly at the graduate and postgraduate levels, and has shown increasing Western influences. On the negative side, a physician who was trained in pre-war Poland and is now in the United States, noted mass production of physicians with modest clinical facilities and the preponderance of didactic lecturing over semi-individual instruction-conditions rather characteristic of most European medical schools. On the positive side were well-informed, up-to-date faculties and the thoughtful planning and organization of graduate and postgraduate medical education. The overall impression was a favorable one, but the system of schooling and of evaluation of students' work made it possible for indifferent students to progress to licensure.

  2. Policy of air protection in Poland

    International Nuclear Information System (INIS)

    Karaczun, Z.M.

    1995-01-01

    The changed political situation and recognition of the acute destruction of the natural environment in Poland have caused a series of actions aimed at preventing further deterioration of Polish environment. One of the most important events which took place in the last few years was the enactment by the Polish Parliament in May 1991 of the Act on the National Ecological Policy. The basic assumption of the new environmental policy is a declaration that sustainable development will in future direct economic development in Poland. The aim of the presented paper is to introduce existing policy of air protection and instruments which have been implemented to protect the air. Special attention is paid to legislation instruments, introduction and enforcement of proper economic mechanisms strengthening air protection and foreign policy aiming at increasing foreign assistance for this objective. Pollutants involved include sulfur dioxide, nitrogen oxides, carbon dioxide and particulates from industry and coal-fired power plants. 9 refs

  3. Role of CSR Reporting. Evidence from Poland

    Directory of Open Access Journals (Sweden)

    Magdalena Wójcik-Jurkiewicz

    2017-09-01

    Full Text Available Role of CSR Reporting. Evidence from Poland The paper addresses the issue of Corporate Social Responsibility (CSR reporting. The concept of CSR reporting is increasingly being discussed among practitioners and academics. The main objective of the paper is to investigate the trends of CSR reporting in Poland and to try to implement them in WIG 30 companies. The research confirmed the existing information chaos in these disclosures of socially responsible issues in various reports. An analysis of domestic and foreign literature has been performed which pointed to the multidimensionality of actions taken by companies in the context of CSR reporting. The research points to the need to apply standards regarding the disclosure of non-financial information in the form of reports for public limited companies.

  4. Distribution of Vulpia species (Poaceae in Poland

    Directory of Open Access Journals (Sweden)

    Ludwik Frey

    2011-01-01

    Full Text Available The distribution of four species of the genus Vulpia [V. myuros (L. C.C. Gmel., V. bromoides (L. S.F. Gray, V. ciliata Dumort. and V. geniculata (L. Link] reported in Poland has been studied. Currently, V. myuros and especially V. bromoides are very rare species, and their greatest concentration can be found only in the Lower Silesia region. The number of their localities decreased after 1950 and it seems resonable to include both species in the "red list" of threatened plants in Poland: V. myuros in the EN category, V. bromoides in the CR category. V. ciliata and V. geniculata are very rare ephemerophytes and their localities not confirmed during ca 60 years are of historical interest only.

  5. A clinical laboratory model for evaluating the acute effects of electronic "cigarettes": nicotine delivery profile and cardiovascular and subjective effects.

    Science.gov (United States)

    Vansickel, Andrea R; Cobb, Caroline O; Weaver, Michael F; Eissenberg, Thomas E

    2010-08-01

    Electronic "cigarettes" are marketed to tobacco users as potential reduced exposure products (PREP), albeit with little information regarding electronic cigarette user toxicant exposure and effects. This information may be obtained by adapting clinical laboratory methods used to evaluate other PREPs for smokers. Thirty-two smokers participated in four independent Latin-square ordered conditions that differed by product: own brand cigarette, "NPRO" electronic cigarettes (NPRO EC; 18 mg cartridge), "Hydro" electronic cigarettes (Hydro EC; 16 mg cartridge), or sham (unlit cigarette). Participants took 10 puffs at two separate times during each session. Plasma nicotine and carbon monoxide (CO) concentration, heart rate, and subjective effects were assessed. Own brand significantly increased plasma nicotine and CO concentration and heart rate within the first five minutes of administration whereas NPRO EC, Hydro EC, and sham smoking did not. Own brand, NPRO EC, and Hydro EC (but not sham) significantly decreased tobacco abstinence symptom ratings and increased product acceptability ratings. The magnitude of symptom suppression and increased acceptability was greater for own brand than for NPRO EC and Hydro EC. Under these acute testing conditions, neither of the electronic cigarettes exposed users to measurable levels of nicotine or CO, although both suppressed nicotine/tobacco abstinence symptom ratings. This study illustrates how clinical laboratory methods can be used to understand the acute effects of these and other PREPs for tobacco users. The results and methods reported here will likely be relevant to the evaluation and empirically based regulation of electronic cigarettes and similar products. (c)2010 AACR.

  6. Spot profile analysis and lifetime mapping in ultrafast electron diffraction: Lattice excitation of self-organized Ge nanostructures on Si(001

    Directory of Open Access Journals (Sweden)

    T. Frigge

    2015-05-01

    Full Text Available Ultrafast high energy electron diffraction in reflection geometry is employed to study the structural dynamics of self-organized Germanium hut-, dome-, and relaxed clusters on Si(001 upon femtosecond laser excitation. Utilizing the difference in size and strain state the response of hut- and dome clusters can be distinguished by a transient spot profile analysis. Surface diffraction from {105}-type facets provide exclusive information on hut clusters. A pixel-by-pixel analysis of the dynamics of the entire diffraction pattern gives time constants of 40, 160, and 390 ps, which are assigned to the cooling time constants for hut-, dome-, and relaxed clusters.

  7. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI.

    Science.gov (United States)

    Gutt, C; Sant, T; Ksenzov, D; Capotondi, F; Pedersoli, E; Raimondi, L; Nikolov, I P; Kiskinova, M; Jaiswal, S; Jakob, G; Kläui, M; Zabel, H; Pietsch, U

    2017-09-01

    We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M 2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q -resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Q z , we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  8. Changes in the High-Latitude Topside Ionospheric Vertical Electron-Density Profiles in Response to Solar-Wind Perturbations During Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir; Truhlik, Vladimir; Wang, Yongli; Arbacher, Becca

    2011-01-01

    The latest results from an investigation to establish links between solar-wind and topside-ionospheric parameters will be presented including a case where high-latitude topside electron-density Ne(h) profiles indicated dramatic rapid changes in the scale height during the main phase of a large magnetic storm (Dst wind data obtained from the NASA OMNIWeb database indicated that the magnetic storm was due to a magnetic cloud. This event is one of several large magnetic storms being investigated during the interval from 1965 to 1984 when both solar-wind and digital topside ionograms, from either Alouette-2, ISIS-1, or ISIS-2, are potentially available.

  9. Church unions and their consequences in Poland

    Directory of Open Access Journals (Sweden)

    Antoni Mironowicz

    2014-11-01

    Full Text Available Orthodox Christians in Poland have faced numerous attempts to be forced into union with the Roman Catholic Church, ranging from the thirteenth to the twentieth century. The first attempt at a union between the Roman Catholic Church and the Orthodox Church took place as early as the mid-thirteenth century. Another attempt at forcing the Orthodox Church into union with Rome took place during the reign of Ladislaŭ II Yagiello. The problem of church union returned in the reign of Alexander the Yagiellonian. When Ivan III rejected all projects for bringing the Florence such a union into practice, discussion on church union disappeared until the end of the sixteenth century. The mission of the papal legate, Father Antonio Possevino, to Ivan IV, had been intended to draw Moscow into the union, and its failure caused the papacy to concentrate its efforts on the Orthodox Church in Poland. The Ruthenian bishops’ obedience to the Pope was officially announced on the 8 October 1596. The decisions of the Uniate-Catholic synod were met with numerous protests from the Orthodox clergy and nobility. The larger part of the clergy and the faithful, together with bishops remained in the Orthodox camp. Despite the failure of the Brest Synod in fully uniting Orthodox and Roman churches, new union projects concerning the Orthodox Church in Poland continued to arise prior to the end of 18th century. The Vatican’s interest in the Orthodox Church in Central Europe was renewed at the end of the First World War. On April 1st, 1917, the Pope created the Congregation for the Oriental Churches which was responsibile for all issues relating to the activities of all the Eastern denominations. Despite aims at unification, attempts at church union have had a negative influence on the relations between the Roman Catholic and Polish Orthodox Church in contemporary Poland. The result of centuries of attempts at unification under the Pope has been fragmentation and division.

  10. Perspectives of the antipsoriatic heliotherapy in Poland.

    Science.gov (United States)

    Krzyścin, J W; Narbutt, J; Lesiak, A; Jarosławski, J; Sobolewski, P S; Rajewska-Więch, B; Szkop, A; Wink, J; Czerwińska, A

    2014-11-01

    Statistical analysis of the daily course of exposures to TL-01 tube radiation for 93 psoriatic patients from the Medical University of Łódź during 20-day phototherapy shows that the dose of 1 J/cm(2) represents a unit of single exposure necessary for psoriasis healing. This value is converted to the antipsoriatic effective dose of 317.9 J/m(2) using the TL-01 lamp irradiance spectrum and the antipsoriatic action spectrum. It is proposed that the daily exposure of 317.9 J/m(2) serves as the standard antipsoriatic dose (SAPD) providing a link between the cabinet and the out-door exposures and it could be used for planning heliotherapy in Poland. A model is proposed to calculate ambient antipsoriatic doses for 3 h exposures around the local noon (9 am-12 am GMT) based on satellite measurements of ozone and cloud characteristics. The model constants are determined by a comparison with pertaining antipsoriatic doses measured by the Brewer spectrophotometer in central Poland. It is found that 3 h exposures to solar radiation in the period 15 May-15 September provides the mean (2005-2013) doses in the range 2.7-3.1 SAPD over Poland. Thus, heliotherapy could be treated as an alternative to the cabinet phototherapy for almost 4 months. It seems that the most effective site for antipsoriatic heliotherapy is the south/east part of Poland (the Bieszczady Mountains). The heliotherapy could be carried out in existing national health centers equipped with the standard easy-to-use biometers for on-line monitoring of UV level and controlling duration of sunbathing to avoid erythema risks. It is even possible to control the antipsoriatic heliotherapy by a patient himself, using low-cost hand-held instruments measuring UV index. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Hildenbrandia rivularis (Rhodophyta in central Poland

    Directory of Open Access Journals (Sweden)

    Joanna Żelazna-Wieczorek

    2011-01-01

    Full Text Available Freshwater red algae Hildenbrandia rivularis has been noted for the first time in central Poland near the Lodz agglomeration. Until now, this alga was recorded only in mountain and Polish Lowland areas. The wide range of habitat conditions influencing the occurrence for this protected species has been determined in the spring niche. The possible threat to habitat where H. rivularis occurs, is connected with construction and exploitation of the A2 highway.

  12. Development of Social Building Societies in Poland

    OpenAIRE

    Anna Białek-Jaworska

    2004-01-01

    The article describes a genesis of Social Building Societies in Poland starting from National Housing Fund through Workers Housing Estates Society in 1934.1939, announcement of cheap building system in New Housing Order in 1993 to Barbara Blida's and Irena Herbst's legislative initiative leading to establish Social Building Societies in 1995. According to International Permanent Social Building Committee social housing consists in supply houses with fixed minimum standard of comfort and equip...

  13. LITERATURE REVIEW ON SOCIAL DIALOGUE IN POLAND

    Directory of Open Access Journals (Sweden)

    Agnieszka Otreba

    2009-01-01

    Full Text Available The article depicts the most important aspects of social dialogue in Poland: definitions and dimensions of the term, basic research questions, dialogue partners and factors influencing the quality of social dialogue. The potential of subsequent research issues are advocated: institutionalized forms and bottom-up models of social dialogue, public policies aiming at enhancement of the analyzed process. Moreover, the social dialogue can be treated as a public policy itself.

  14. Hildenbrandia rivularis (Rhodophyta) in central Poland

    OpenAIRE

    Joanna Żelazna-Wieczorek; Maciej Ziułkiewicz

    2011-01-01

    Freshwater red algae Hildenbrandia rivularis has been noted for the first time in central Poland near the Lodz agglomeration. Until now, this alga was recorded only in mountain and Polish Lowland areas. The wide range of habitat conditions influencing the occurrence for this protected species has been determined in the spring niche. The possible threat to habitat where H. rivularis occurs, is connected with construction and exploitation of the A2 highway.

  15. Multicultural Leadership Strategies : case: Company X, Poland

    OpenAIRE

    Khanh Ye Le, Nguyen

    2015-01-01

    This thesis aims at studying multicultural leadership strategies which are used by the team leaders in Company X, Poland. Furthermore, this thesis examines how these strategies are implemented in daily management to prevent cultural conflicts. The study used deductive approach with the assistance of qualitative research method. Secondary data was collected from reliable books, articles and Internet while primary data was collected through observations and interviews. The literature f...

  16. Lyme disease in Poland in 2015

    Science.gov (United States)

    Paradowska-Stankiewicz, Iwona; Chrześcijańska, Irena

    2017-01-01

    Lyme disease is the most common tick-borne disease in Poland. Borrelia burgdorferi spirochete can occur in the whole country, which, according to ECDC, should be considered as an endemic area. Borrelia strains are transmitted to humans and certain other animals by Ixodes (1). Human infection is caused by saliva or tick vomit. Reservoir spirochete are numerous species of animals, mainly rodents. Lyme disease, due to its multifocal character, rich symptomatology and diagnostic problems, is a serious challenge for clinicians and epidemiologists The aim of this study was to assess the epidemiological situation of Lyme disease in Poland in 2015 in comparison to the previous years The descriptive analysis was based on data retrieved from routine mandatory surveillance system and published in the annual bulletin “Infectious diseases and poisonings in Poland in 2015” (2) Despite observed in recent years the tendency to growth of number of cases, in 2015 was marked by growth inhibition incidence of Lyme disease.In 2015, 13 625 cases were registered in Poland, ie by 0.7% less than in the previous year. The overall incidence in the country was 35.4 per 100 000 population - the highest was recorded in the Podlaskie voivodeship - 96.3 per 100 000 inhabitants. In 2015, 1905 (14%) people were hospitalized due to Lyme disease In 2015, for the first time in a few years, the growth rate of Lyme disease has been stopped. Registered 0.7% less cases than in the previous year. There is still a need for bringing awareness of the need for diagnostic laboratory testing according to recommendations, which will improve the accuracy of the diagnosis

  17. Pharmaceutical Distribution Market Channels in Poland

    Directory of Open Access Journals (Sweden)

    Agnieszka Woś

    2009-09-01

    Full Text Available Distribution on the pharmaceutical market in Poland is interesting and the most difficult sphere to manage. Numerous varied and specialized companies operating on the market cause that the processes of choosing middlemen in distribution channels are very complex. The hereby article presents the role and location of the companies operating within distribution channels on the pharmaceutical market. It draws attention to the development of non-pharmacy and non-wholesale sales channels.

  18. Atmospheric fallout radionuclides in peatland from Southern Poland.

    Science.gov (United States)

    Mróz, Tomasz; Łokas, Edyta; Kocurek, Justyna; Gąsiorek, Michał

    2017-09-01

    Two peat profiles were collected in a peat bog located in Southern Poland and their geochronology were determined using 210 Pb, 238,239+240 Pu and 137 Cs radiometric techniques. The 210 Pb chronologies were established using the constant rate of supply model (CRS) and are in good agreement with the Pu isotopes and 137 Cs time markers. Maximum activities of Pu isotopes were found at a depth corresponding to the early 1960s, which is the period characterized by the maximum nuclear weapon tests. The results showed that the 210 Pb method is the most accurate technique for the determination age and accumulation rate of a peat. The next part of this study calculated linear accumulation rates by analyzing 238,239+240 Pu and 137 Cs vertical distributions in the profiles. Activities of fallout isotopes were also measured in plants covering the peatland. The highest activities of 137 Cs and 210 Pb were found in Calluna vulgaris samples, and 239+240 Pu were found only in two samples (C. vulgaris and leaves of Oxycoccus quadripelatus). Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. THE ASSESSMENT AND USE OF INTEGRATED PRODUCT POLICY IN POLAND

    Directory of Open Access Journals (Sweden)

    Anna ANDRYKIEWICZ

    2012-10-01

    Full Text Available The paper presents the implementation of Integrated Product Policy in Poland in the light of the European activities. It analyses the EU laws within this scope. It assesses the progress of LCA implementation, ecolabelling, ecotaxes, EMAS and green public procurement in Poland. It explains the reasons of slow IPP implementation in Polish organisations. It mainly refers to the distribution and promotion of ecolabelling, based on empirical research in Germany and Poland.

  20. Employment in Poland 2007: Security on flexible labour market

    OpenAIRE

    Bukowski, Maciej; Lewandowski, Piotr; Koloch, Grzegorz; Baranowska, Anna; Magda, Iga; Szydlowski, Arkadiusz; Bober, Magda; Bieliński, Jacek; Zawistowski, Julian; Sarzalska, Malgorzata

    2008-01-01

    This Report is a third in the series Employment in Poland. It consists of four Parts, devoted to empirical analysis of the impact of macroeconomic shocks on EU New Member States labour markets‘ in 1996-2006; utilization of flexible forms of employment on Polish labor market, determinants of wages and wage inequalities in Poland; effectiveness of ALMP in Poland, respectively. In Part I, we present how the cyclical upturn propagated on Polish labour market in 2003-2007 and how the performan...

  1. Poland-Mobius syndrome in an infant girl

    OpenAIRE

    Al-Mazrou, Khalid A.; Al-Ghonaim, Yazeed A.; Al-Fayez, Abdulrhman I.

    2009-01-01

    Mobius syndrome is a rare condition of unclear origin, characterized by a unilateral or bilateral congenital facial weakness with impairment of ocular abduction, which is frequently associated with limb anomalies. Poland described a condition in which there was unilateral absence of pectoralis major muscle and ipsilateral syndactyly. The combination of Poland-Mobius syndrome is rare, with an estimated prevalence 1:500 000. We describe a case of Poland-Mobius syndrome in association with conge...

  2. Batrachospermum atrum (Rhodophyta – first record in Poland

    Directory of Open Access Journals (Sweden)

    Kowalski Wojciech A.

    2013-12-01

    Full Text Available The paper gives new data on the occurrence of Batrachospermum atrum (Hudson Harvey, a freshwater Rhodophyta species rare in Poland. It was found growing on stony bottom in a small stream in northwestern Poland; at this site it was associated mainly with Potamogeton nodosus Poir., green algae Cladophora glomerata (L. Kützing and Mougeotia sp. Its occurrence in Poland and some ecological data are discussed, and original photographs of the plant and its habitat are presented.

  3. Funding Innovation in Poland through Crowdfunding

    Directory of Open Access Journals (Sweden)

    Katarzyna Kozioł-Nadolna

    2016-01-01

    Full Text Available Funding innovative projects is one of the most serious problems faced by business owners in Poland. Therefore, due to the difficulties of obtaining external sources of financing, crowdfunding may constitute a new source of fundraising for innovative ventures. Therefore, crowdfunding – as a way of raising capital for projects – is the subject of the discussion in this article. The research aim of the article is to identify and evaluate crowdfunding platforms as well as the innovative projects carried out by these platforms in Poland in 2014-2016. The first part characterizes crowdfunding as a source of funding innovation and presents the nature of crowdfunding, its characteristics and models. The empirical part is based on inductive-deductive inference, desk research, i.e. the analysis of crowdfunding market in Poland in two research periods and a case study analysis. The article shows the results of the research on the Polish crowdfunding market in 2014-2016. The author also presents a case study of funding innovation on the Kickstarter.com platform by a Polish company Sher.ly.

  4. Moebius-Poland syndrome: A case report

    Directory of Open Access Journals (Sweden)

    Mostapha Ahmad

    2012-01-01

    Full Text Available El síndrome de Moebius es una sintomatología poco frecuente en la que los pares craneales sexto y séptimo están involucrados. Esta implicación resulta en parálisis facial. Se han descrito unos 500 casos en la literatura médica mundial y algunos de ellos han recibido tratamiento quirúrgico. Además el síndrome ha recibido otros nombres, tales como aplasia congénita nuclear, aplasia nuclear infantil, parálisis congénita oculofacial y diplejía facial. El síndrome de Poland es otra anomalía congénita muy poco frecuente de la pared torácica, caracterizado por ausencia unilateral parcial o total del músculo pectoral mayor y braquisindactilia ipsilateral. Sin embargo, el síndrome de Moebius-Poland es más raro, ya que el primer caso fue reportado recientemente en el año 2007 por Diego López de Lara et al. En este artículo se presentará este caso poco frecuente, que es una combinación entre ambos síndromes Moebius y Poland en un paciente masculino de tres meses de edad.

  5. CHP plant Legionowo Poland - Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-12-01

    In 1997, a new Energy Law was passed in Poland. An important element of the law is that local energy planning is made obligatory. The law describes obligatory tasks and procedures for Polish municipalities related to planning and organisation of the energy sector. With the objective of supporting the Polish municipalities in their obligations according to the energy law of 1997, the project 'Energy Planning in Poland at Municipal Level - Support to Decision Makers' was launched. As part of the project, Municipal Guideline Reports have been elaborated for three model municipalities. These guidelines present the basis for the Energy Supply Plans in these municipalities. For the city of Legionowo, the following was recommended: 1. The planning processes initiated during the project should be continues/followed up, 2. Master Plan for the district heating system should be prepared, 3. The possibilities of establishment of a major natural gas-fired CHP plant of the Combined Cycle type should be investigated. The present report is the final Master Plan based on the following reports: Master Plan for Legionowo - Status Report; Master Plan for Legionowo - Hydraulic Analysis; CHP Plant Legionowo Poland - CHP Feasibility Analysis. The final Master Plan describes the status in the DH Company in Legionowo, possible improvements and an investment plan for the selected scenario. (BA)

  6. System for analysing sickness absenteeism in Poland.

    Science.gov (United States)

    Indulski, J A; Szubert, Z

    1997-01-01

    The National System of Sickness Absenteeism Statistics has been functioning in Poland since 1977, as the part of the national health statistics. The system is based on a 15-percent random sample of copies of certificates of temporary incapacity for work issued by all health care units and authorised private medical practitioners. A certificate of temporary incapacity for work is received by every insured employee who is compelled to stop working due to sickness, accident, or due to the necessity to care for a sick member of his/her family. The certificate is required on the first day of sickness. Analyses of disease- and accident-related sickness absenteeism carried out each year in Poland within the statistical system lead to the main conclusions: 1. Diseases of the musculoskeletal and peripheral nervous systems accounting, when combined, for 1/3 of the total sickness absenteeism, are a major health problem of the working population in Poland. During the past five years, incapacity for work caused by these diseases in males increased 2.5 times. 2. Circulatory diseases, and arterial hypertension and ischaemic heart disease in particular (41% and 27% of sickness days, respectively), create an essential health problem among males at productive age, especially, in the 40 and older age group. Absenteeism due to these diseases has increased in males more than two times.

  7. The medical physics specialization system in Poland.

    Science.gov (United States)

    Bulski, Wojciech; Kukołowicz, Paweł; Skrzyński, Witold

    2016-07-01

    This paper presents the situation of the profession of medical physicists in Poland. The official recognition of the profession of medical physicist in Polish legislation was in 2002. In recent years, more and more Universities which have Physics Faculties introduce a medical physics specialty. At present, there are about 15 Universities which offer such programmes. These Universities are able to graduate about 150 medical physicists per year. In 2002, the Ministry of Health introduced a programme of postgraduate specialization in medical physics along the same rules employed in the specialization of physicians in various branches of medicine. Five institutions, mostly large oncology centres, were selected as teaching institutions, based on their experience, the quality of the medical physics professionals, staffing levels, equipment availability, lecture halls, etc. The first cycle of the specialization programme started in 2006, and the first candidates completed their training at the end of 2008, and passed their official state exams in May 2009. As of January 2016, there are 196 specialized medical physicists in Poland. Another about 120 medical physicists are undergoing specialization. The system of training of medical physics professionals in Poland is well established. The principles of postgraduate training and specialization are well defined and the curriculum of the training is very demanding. The programme of specialization was revised in 2011 and is in accordance with EC and EFOMP recommendations. Copyright © 2016 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  8. Radioactive contamination of the forests of southern Poland and Finland

    International Nuclear Information System (INIS)

    Jasinska, H.; Kozak, K.; Mietelski, J.W.; Barszcz, J.; Greszta, J.

    2004-01-01

    Experimental data of caesium and ruthenium radioactivity in chosen parts of forest ecosystems in Finland and Southern Poland are presented and compared. Measurements were performed with a low-background gamma-rays spectrometer with the Ge(Li) detector. The maximum caesium 137 activity in litter from Poland is 2.5 kBq, in that from Finland 3.9 kBq, in spruce needles it is 0.4 kBq (Poland), 0.9 kBq (Finland) and in fern leaves it is as high as 15.9 kBq per kg of dry mass in one sample from Poland. (author)

  9. Additions to the biota of lichenized fungi of Poland

    Directory of Open Access Journals (Sweden)

    Adam Flakus

    2013-12-01

    Full Text Available New records of five lichenized fungi from Poland are provided. Hypotrachyna afrorevoluta, Lecanora quercicola, Rhizocarpon superficiale and Strigula ziziphi are new to Poland. Of these, Strigula ziziphi is reported also as new to Central Europe and Hypotrachyna afrorevoluta as new to the Carpathians. Additionally, Thelenella muscorum var. octospora is recorded from its second locality in Poland as new to the Polish Carpathians. Hypostictic acid chemosyndrome has been noticed for the first time in European (Poland and South American (Bolivia populations of Rhizocarpon superficiale.

  10. Poland-Mobius syndrome in an infant girl.

    Science.gov (United States)

    Al-Mazrou, Khalid A; Al-Ghonaim, Yazeed A; Al-Fayez, Abdulrhman I

    2009-01-01

    Mobius syndrome is a rare condition of unclear origin, characterized by a unilateral or bilateral congenital facial weakness with impairment of ocular abduction, which is frequently associated with limb anomalies . Poland described a condition in which there was unilateral absence of pectoralis major muscle and ipsilateral syndactyly. The combination of Poland-Mobius syndrome is rare, with an estimated prevalence 1:500 000. We describe a case of Poland-Mobius syndrome in association with congenital bilateral vocal fold immobility. To our knowldge, this is the first report of such an association between Poland-Mobius syndrome and congenital bilateral vocal fold immobility.

  11. Pulmonary adiaspiromycosis in the Eurasian beaver (Castor fiber) inhabiting Poland.

    Science.gov (United States)

    Dolka, I; Giżejewska, A; Giżejewski, Z; Kołodziejska-Lesisz, J; Kluciński, W

    2017-09-26

    Adiaspiromycosis is a rare fungal infection caused by saprophytic fungi Emmonsia spp. (type Ascomycota) occurring especially in small free-living mammals. The aim of this study was to evaluate the occurrence of histopathological lesions asscociated with adiaspiromycosis in the Eurasian beaver inhabiting Poland. In order to evaluate the presence of natural adiaspiromycosis we systematically investigated beaver populations from north-eastern Poland for adiaspores in the lungs. This study reveals for the first time the presence of pulmonary adiaspiromycosis of Eurasian beaver in Poland. As far as we know, there is no published data regarding pulmonary adiaspiromycosis in human patients in Poland.

  12. Evaluation of the level of depression among medical students from Poland, Portugal and Germany.

    Science.gov (United States)

    Seweryn, Mariusz; Tyrała, Kinga; Kolarczyk-Haczyk, Aleksandra; Bonk, Magdalena; Bulska, Weronika; Krysta, Krzysztof

    2015-09-01

    Depression is a serious illness affecting health, family and professional life of many people of all sectors of society. It also concerns students, regardless of their geographical location. The Beck Depression Inventory (BDI) is a proper tool to brief check of the level of depression because it has high correlation with depression. The aim of this study was to assess and compare the level of depression among medical students from Poland, Portugal and Germany. Students from different countries were asked to fill in an electronic form containing the BDI. The form was created separately for each country, using official translation of the BDI, approved by the competent psychiatric association. Google Drive software was used for the electronic form, and Stat soft Statistica v10 software for statistical analysis. There were statistically significant differences (p<0.05) in terms of average score of the BDI and of the proportion of the scores more than 10 points of medical and technology students among kinds of studies and countries. The average score of the BDI of medical students: Poland: 13.76±9.99 points; Germany: 8.49±7.64 points; Portugal: 7.37±7.67 points. The average score of the BDI of technology students: Poland: 12.42±9.66 points; Germany: 10.51±8.49 points; Portugal: 9.25±8.97 points. The proportion of the scores more than 10 points of medical students: Poland 56.32% (285/506) Germany 34.92% (154/441) Portugal 26.03% (82/315). The proportion of the scores more than 10 points of technology students: Poland 55.01% (368/669) Germany 43.82% (156/356) Portugal 37.57% (136/362). The highest depression score among medical and technology students according the BDI was found in Poland. A proper monitoring of depression is required, as well as rapid and appropriate help for those who suffer from it.

  13. Prediction of spur overlap time, radical yield profiles, and decomposition of trichloroethylene induced by various pulse types of electron beam

    International Nuclear Information System (INIS)

    Kim, D.-W.; Han, K.-C.; Lee, W.-K.; Ihm, S.-K.

    1996-01-01

    A kinetic model was suggested to compute the yield profiles of primary radicals generated from water radiolysis. For various cases including pulse radiolysis and steady irradiation time of spur overlap was computed in order to ensure homogeneity over the entire system. As a result, consistency to roughly first order kinetics was resulted for decomposition of 1 ppm trichloroethylene (TCE) and slight deviation from the linear model was predicted for 10 ppm TCE. (author)

  14. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    Science.gov (United States)

    Adamek, J.; Müller, H. W.; Silva, C.; Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S.; Horacek, J.; Kurzan, B.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R.; Fernandes, H.; Figueiredo, H.

    2016-04-01

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (ΦBPP) and the floating potential (Vfl) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula Te = (ΦBPP - Vfl)/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  15. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    Energy Technology Data Exchange (ETDEWEB)

    Adamek, J., E-mail: adamek@ipp.cas.cz; Horacek, J.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R. [Institute of Plasma Physics, Prague (Czech Republic); Müller, H. W. [Max-Planck-Institute for Plasma Physics, Garching near Munich (Germany); Institute of Materials Chemistry & Research, University of Vienna, Vienna (Austria); Silva, C.; Fernandes, H.; Figueiredo, H. [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal); Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S. [Institute for Ion Physics and Applied Physics, University of Innsbruck, Innsbruck (Austria); Kurzan, B. [Max-Planck-Institute for Plasma Physics, Garching near Munich (Germany)

    2016-04-15

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (Φ{sub BPP}) and the floating potential (V{sub fl}) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula T{sub e} = (Φ{sub BPP} − V{sub fl})/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  16. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    International Nuclear Information System (INIS)

    Adamek, J.; Horacek, J.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R.; Müller, H. W.; Silva, C.; Fernandes, H.; Figueiredo, H.; Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S.; Kurzan, B.

    2016-01-01

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (Φ_B_P_P) and the floating potential (V_f_l) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula T_e = (Φ_B_P_P − V_f_l)/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  17. EPR dosimetry for actual and suspected overexposures during radiotherapy treatments in Poland

    International Nuclear Information System (INIS)

    Trompier, F.; Sadlo, J.; Michalik, J.; Stachowicz, W.; Mazal, A.; Clairand, I.; Rostkowska, J.; Bulski, W.; Kulakowski, A.; Sluszniak, J.; Gozdz, S.; Wojcik, A.

    2007-01-01

    EPR dosimetry on bone samples was recently used for actual and suspected overexposures during radiotherapy treatments performed in Poland. In 2001 five breast-cancer patients undergoing radiotherapy in the Bialystok Oncology Center, Poland, were overexposed. The overexposure was due to a defective safety interlock and an obsolete safety system of the linear accelerator. For the three most exposed patients, pieces of rib bones removed during surgical reconstruction of the chest wall and skin transplantation allowed an estimation of the accident doses by electron paramagnetic resonance (EPR) spectrometry. The doses delivered during the accident were as high as 60-80 Gy. In 2005, a patient treated in Kielce Holy Cross Cancer Center exhibited similar deep necroses of the chest wall but 6 years following a 'standard upper mantel fields' radiotherapy for Hodgkin's disease. In order to investigate the possible late effect of an overexposure as necrosis origin, the delivered dose was afterward estimated by EPR dosimetry performed on a rib sample

  18. Measurements of electron density and temperature profiles in plasma produced by Nike KrF laser for laser plasma instability research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Karasik, M.; Chan, L. Y.

    2015-08-01

    A grid image refractometer (GIR) has been implemented at the Nike krypton fluoride laser facility of the Naval Research Laboratory. This instrument simultaneously measures propagation angles and transmissions of UV probe rays (λ = 263 nm, Δt = 10 ps) refracted through plasma. We report results of the first Nike-GIR measurement on a CH plasma produced by the Nike laser pulse (˜1 ns FWHM) with the intensity of 1.1 × 1015 W/cm2. The measured angles and transmissions were processed to construct spatial profiles of electron density (ne) and temperature (Te) in the underdense coronal region of the plasma. Using an inversion algorithm developed for the strongly refracted rays, the deployed GIR system probed electron densities up to 4 × 1021 cm-3 with the density scale length of 120 μm along the plasma symmetry axis. The resulting ne and Te profiles are verified to be self-consistent with the measured quantities of the refracted probe light.

  19. A current profile model for magnetic analysis of the start-up phase of toroidal plasmas driven by electron cyclotron heating and current drive

    International Nuclear Information System (INIS)

    Yoshinaga, T.; Uchida, M.; Tanaka, H.; Maekawa, T.

    2007-01-01

    An estimation model of plasma current density distribution for the start-up phase of toroidal plasmas generated by electron cyclotron heating (ECH) in the low aspect ratio torus experiment device is presented. The model assumes a power law parabolic current profile having seven fitting parameters. Its position, extent and broadness (or steepness) are fitted by adjusting these parameters to the observed magnetic flux signals. The adequacy of the model has been examined and confirmed by comparisons of the reconstructed current profiles and the resultant poloidal flux surfaces with the plasma images at visible light range at various stages of start-up discharges, including both the initial open field phase, the subsequent closed field phase, the current decay phase after ECH is turned off and also by a current-profile limiting experiment. This method may be useful for the study of non-inductive start-up experiments by ECH, where there is no appropriate MHD constraint on the current distribution as that in the full tokamak discharge plasmas

  20. Spatial profiling of degradation processes in hindered-amine-stabilized polymers by electron spin resonance imaging of nitroxides

    Czech Academy of Sciences Publication Activity Database

    Marek, Antonín; Kaprálková, Ludmila; Pfleger, Jiří; Pospíšil, Jan; Pilař, Jan

    2005-01-01

    Roč. 99, S (2005), s. 195-198 ISSN 0009-2770. [Meeting on Chemistry and Life /3./. Brno, 20.9.2005-22.9.2005] Institutional research plan: CEZ:AV0Z40500505 Keywords : polymer degradation * nitroxides * electron spin resonance imaging Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.445, year: 2005

  1. Exploratory wine consumer behavior in a transitional market: The case of Poland

    Directory of Open Access Journals (Sweden)

    Renata Schaefer

    2018-06-01

    Full Text Available This paper investigates exploratory behavior among wine consumers in Poland where the country's wine culture is in a state of rapid change. This study investigates the extent to which demographics, values, and wine preferences relate to exploratory behavior.Data obtained from 198 Polish wine consumers was used in the analysis. Exploratory behavior was measured using the VARSEEK scale adapted to wine. Other measures included the Schwartz Value Inventory, wine knowledge and involvement, and measures relevant for wine purchasing behavior. Demographic variables were also used to profile consumers.The findings show that Polish wine consumers’ level of exploratory behavior is not related to demographics, but is influenced by personal values. The consumers who were most likely to engage in exploratory behavior valued creativity, fun, and risk taking and were less concerned about behaving properly. They also had more global outlook as they were more likely to purchase wine in other countries and desired more wines from regions outside Poland.The findings are useful for wine marketers when developing strategies for wine consumers in transitional markets based on their unique needs and expectations.This is the first known research conducted in Poland focusing on wine consumers’ exploratory behavior and subsequent wine preferences. Keywords: Polish wine market, Consumer behavior, Exploratory behavior, Consumer segmentation

  2. Georadar studies on St. Benedict's Church on Lasota Hill, Kraków, Poland

    Science.gov (United States)

    Tomecka-Suchoń, Sylwia

    2012-04-01

    Georadar methodology has a considerable potential as a tool for verification of archeological hypotheses. I applied it in the present study to resolve a discussion on the importance of a Proto-Romanesque structure located on Lasota Hill. It is one of the oldest structures on the right bank of Vistula River in Kraków in Poland and some archeologists believe that it was the first seat of the rulers of Lesser Poland in the 9th century. After few decades, the prince's castle was built on Wawel Hill, where subsequently the royal castle was constructed. On the place of the abandoned Proto-Romanesque edifice, a small St. Benedict's Church was raised, but the importance of its predecessor was discussed. Archeological excavations suggested that it served as the prince's residence, but this view would be much strengthened if traces of a prince's building — palatium — could be found. With this in mind, I undertook a search for traces of palatium, employing georadar methodology. I carried out the measurements using Georadar PROEX produced by MALA Geoscience with a set of shielded antennas of frequencies 500 and 800 MHz. They permitted to construct echogram profiles, whose interpretation suggested the existence of palatium. Thus, the georadar data supported the archeological hypothesis about the important role of the Proto-Romanesque structures on Lasota Hill in the early medieval era in Poland, and at the same time demonstrated the usefulness of introducing geophysical methods to archaeology.

  3. A comparison of the perceptions and aspirations of third-year physiotherapy students trained in three educational settings in Poland.

    Science.gov (United States)

    Gotlib, Joanna; Białoszewski, Dariusz; Sierdziński, Janusz; Jarosz, Mirosław J; Majcher, Piotr; Barczyk, Katarzyna; Bauer, Aleksandra; Cabak, Anna; Grzegorczyk, Joanna; Płaszewski, Maciej; Kułak, Wojciech; Nowotny-Czupryna, Olga; Prokopowicz, Katarzyna

    2010-03-01

    In Poland, physiotherapy is offered at three types of school: medical universities, universities of physical education, and schools that do not specialise in either the medical sciences or physical education. This study explored the knowledge of students who were completing their physiotherapy studies about working in Poland and other countries of the European Union (EU), and about their vocational plans. Students were asked, through self-assessment, about aspects of the professional skills they had gained. Quantitative questionnaire-based study of students in three university settings. Eleven university-level schools in Poland offering studies in physiotherapy and representing three orientations: medical sciences (MS), physical education (PE) and other universities (OU). The study sample comprised of 954 third-year Bachelor programme students. The differences in university profiles did not influence the vocational plans of the students, with more than 70% (668/954) declaring that they would look for work outside Poland: 76% (725/954) in the UK and 69% (658/954) in Germany. Most students stated that finding work as a physiotherapist is difficult in Poland (686/954,72%) and easy in other EU countries (763/954, 80%). Differences in university profiles had an effect on the students' assessments of their professional skills, as students from universities without a long-standing tradition of training in physiotherapy declared that they were less well prepared to work as physiotherapists; the difference was statistically significant for 12 of the 16 domains examined (P<0.05). In the light of these results, an increased influx of Polish physiotherapists, trained according to European standards, into EU countries, especially the UK and Germany, is to be expected in the near future. The physiotherapists will predominantly be graduates of medical and sports-oriented state universities. It appears advisable to launch, under the auspices of an EU programme, an integrated

  4. Electron temperature profiles in axial field 2.45 GHz ECR ion source with a ceramic chamber

    Science.gov (United States)

    Abe, K.; Tamura, R.; Kasuya, T.; Wada, M.

    2017-08-01

    An array of electrostatic probes was arranged on the plasma electrode of a 2.45 GHz microwave driven axial magnetic filter field type negative hydrogen (H-) ion source to clarify the spatial plasma distribution near the electrode. The measured spatial distribution of electron temperature indicated the lower temperature near the extraction hole of the plasma electrode corresponding to the effectiveness of the axial magnetic filter field geometry. When the ratio of electron saturation current to the ion saturation current was plotted as a function of position, the obtained distribution showed a higher ratio near the hydrogen gas inlet through which ground state hydrogen molecules are injected into the source. Though the efficiency in producing H- ions is smaller for a 2.45 GHz source than a source operated at 14 GHz, it gives more volume to measure spatial distributions of various plasma parameters to understand fundamental processes that are influential on H- production in this type of ion sources.

  5. Improving the automatic inversion of digital Alouette/ISIS ionogram reflection traces into topside electron density profiles

    Czech Academy of Sciences Publication Activity Database

    Benson, R. F.; Truhlík, Vladimír; Huang, X.; Wang, YL.; Bilitza, D.

    2012-01-01

    Roč. 47, č. 4 (2012), RS0L04/1-RS0L04/10 ISSN 0048-6604 R&D Projects: GA ČR GAP209/10/2086 Institutional support: RVO:68378289 Keywords : ionosphere * electron concentration * radio waves * solar activity Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 1.000, year: 2012 http://onlinelibrary.wiley.com/doi/10.1029/2011RS004963/abstract

  6. Low energy electron beams for industrial and environmental applications

    CERN Document Server

    Skarda, Vlad

    2017-01-01

    EuCARD-2 Workshop, 8-9 December 2016, Warsaw, Poland. Organizers: Science and Technology Facilities Council, UK CERN - The European Organization for Nuclear Research, Switzerland, Institute of Nuclear Chemistry and Technology, Poland, Fraunhofer Institute for Electron Beam and Plasma Technology, Germany, Warsaw University of Technology, Poland. An article presents short information about EuCARD-2 Workshop “Low energy electron beams for industrial and environmental applications”, which was held in December 2016 in Warsaw. Objectives, main topics and expected output of meeting are described. List of organizers is included.

  7. Difference in electron thermal diffusivity and profile between interior and exterior of TFTR L-mode plasmas

    International Nuclear Information System (INIS)

    Hiroe, S.; Johnson, D.W.; Goldston, R.J.

    1990-01-01

    The local properties such as scale lengths of the electron density (L n e ), temperature (L T e ), and pressure (L p e ), and the electron thermal diffusivity χ e (r) (m 2 /s) for r/a > 0.3 have been studied for TFTR L-mode discharges under the assumption of χ e = χ i . The scale lengths and the electron thermal diffusivity in the interior 0.3 e can be expressed as (with correlation coefficient R = 0.61), χ e (r) = 1.44 x 10 18 (r/a) 1.0 T e (r) 0.1 q(r) 0.1 /n e 0.9 (r). In the exterior region (0.55 e can be described as (with R = 0.68), χ e (r) = 2.3 x 10 3 (r/a) 1.7 T e (r) 0.7 q(r) 0.8 /n e 0.2 (r). It is interesting to note the negative n e dependence of χ e in the interior and the positive T e dependence of χ e in the exterior

  8. A new record of Typha shuttleworthii (Typhaceae in Poland

    Directory of Open Access Journals (Sweden)

    Nobis Marcin

    2015-10-01

    Full Text Available The paper presents a new locality of Typha shuttleworthii W.D.J. Koch & Sond. in Poland. The species was found in wet roadside ditch in Kryg village near Gorlice (ATPOL grid square EG09. The distribution map of the species in Poland is provided.

  9. Leucopaxillus lepistoides, a new steppe fungus in Poland

    Directory of Open Access Journals (Sweden)

    Janusz Łuszczyński

    2013-12-01

    Full Text Available The paper presents information on Leucopaxillus lepistoides (Maire Singer, a new species for Poland. This fungus was found in two localities: the neighbourhood of Busko Zdrój and Chęciny (Little Polish Upland, S-Poland. Both localities were in the xerothermic grasslands belonging to the Cirsio-Brachypodion Order, Festuco-Brometea Class.

  10. Rinodina degeliana: a corticolous lichen species overlooked in Poland

    Directory of Open Access Journals (Sweden)

    Dariusz Kubiak

    2013-12-01

    Full Text Available New localities of Rinodina degeliana in Poland are described. The morphology, chemistry, distribution and ecology of the species are discussed and characters that help to differentiate R. degaliana from similar lichens are presented. The species is relatively frequent in lime-hornbeam forests of northern and central Poland.

  11. Dimensions of health among the elderly in Poland and Croatia

    NARCIS (Netherlands)

    Knurowski, T.; Lazic, D.; van Dijk, J.P.; Geckova, Andrea; Tobiasz-Adamczyk, B.; van den Heuvel, W.J.A.

    2004-01-01

    On the basis of the WHO definition of health, we aimed at exploring the model of health and identifying the most important dimensions of health among the elderly in two Central European countries: Poland and Croatia. Randomly chosen elderly aged 65-85 from Krakow (Poland) and from Zagreb and some

  12. [Medical student curriculum in psychiatry in Poland].

    Science.gov (United States)

    Bilikiewicz, A

    1999-01-01

    The author describes present medical student curricula in psychiatry in Polish medical schools based on the questionnaire sent to all the lecturers of the subject in Poland. The questionnaire contained questions concerning the schedule of lectures, seminars and classes (the list of topics) as well as the number of hours of the forms of activities like interpersonal training, discussion groups, internship, etc. We also asked on which year of studies the course in psychiatry took place. The questionnaire included our request to describe the level of integration of psychiatry and other pre-clinical and clinical subjects as well as to enclose a recommended reading list (handbooks and other items of literature). The last question dealt with the problem of assessment of lectures and classes by students. The results of the questionnaire reveal great differences in the curricula of psychiatry in various schools in Poland. The differences lie both in the courses and the number of hours devoted to teaching psychiatry (in most schools it was 120 hours or less). In 7 schools students learn psychiatry in the 6th i.e. the last year of their studies. In 2 schools lectures in psychiatry are given in the th year. In Kraków and Gdańsk the courses in psychiatry consist of 150 and 160 hours respectively. The author proposes unification of the curricula in psychiatry concerning both the number of hours of classes and lectures, and topics as well as introducing the diagnostic and classifying criteria ICD-10 (WHO) since Poland is going to join EU.

  13. THE E-HEALTH SYSTEMS IN POLAND

    Directory of Open Access Journals (Sweden)

    Zdzisław PÓLKOWSKI

    2013-11-01

    Full Text Available Information Technologies are disruptive technologies that have caused major changes in health system in Poland. Current digital economy is driven by modern information and new IT tools, which offer hospitals, doctors and patient access to any type of information, regardless of its form of existence, storage type or geographical location. These tools encourage the development of new activities, health services. The purpose of this article is to analyze the the current state of development of e-services in Poland in the context of nowadays health system. In the first part of the paper, the authors present various programmes, which enable the access to the medical services and patients’ data online. The next part of the paper is devoted to examining the technical aspects of the said programmes and presenting their advantages as well as the areas which might be improved.The last part of the work will be focused on the websites of the selected health institutions. According to the authors, WWW services provide much information on how the process of computer systems are being implemented, what data the services include and the capacity of the equipment as well as the software, human resources and the knowledge in this sphere. Moreover this section highlights the latest trends in e-health with particular emphasis on aspects such as the use of private and public cloud computer and t heir integration with web sites of health institutions. This study brings its contribution to the understanding of the change of health system in Poland behavior by using a new perspective e-health systems and IT tools above by doctors, officers and patients.

  14. Coal and its perspectives in Poland

    International Nuclear Information System (INIS)

    Locatelli, C.

    1993-01-01

    The seminar held in Warsaw by the CIFOPE from 23 to 25 november 1992 was centered around the restructuring of the coal industry and its implications for the Polish economy in the context of the current deep-running economic reforms. Partly based on French experience, this seminar shed some light on long-term problems for Poland like the kind of industrial policy that will be needed to avoid desertification problems, the need for price reform in the pursuit of profitability, and the networks and financial aids needed to restructure on such a large scale, considering that coal is a key sector in the Polish economy

  15. Poland petroleum refinery sludge lagoon demonstration project

    International Nuclear Information System (INIS)

    Altman, D.J.

    2000-01-01

    The US Department of Energy and the Institute for Ecology of Industrial Area have been working together to develop mutually beneficial, cost-effective environmental remediation technologies such as the demonstration of bioremediation techniques for the clean up of acidic petroleum sludge impacted soils at an oil refinery in southern Poland. After an expedited site characterization, treatability study, and a risk assessment study, a remediation strategy was devised. The waste material was composed primarily of high molecular weight paraffinic and polynuclear aromatic hydrocarbons. A biopile design which employed a combination of passive and active aeration in conjunction with nutrient and surfactant application as used to increase the biodegradation of the contaminants of concern

  16. Chara strigosa A. Braun (Characeae in Poland

    Directory of Open Access Journals (Sweden)

    Andrzej Hutorowicz

    2014-01-01

    Full Text Available Chara strigosa is reported from several lakes in Poland. The finds were published by Izabella Dąmbska in 1966, but have not been recognised internationally, presumably because Dąmbska's article was published in a local paper in Polish. We give a short description of Charetum strigosa first described by Dąmbska. One of the lakes with C. strigosa is reported with luxuriant growth of a blue-green bacteria common in water blooms. There is a need to survey these lakes in order to prevent an increasing eutrophication.

  17. Auriculariopsis albomellea (Agaricales, Schizophyllaceae new for Poland

    Directory of Open Access Journals (Sweden)

    Władysław Wojewoda

    2013-12-01

    Full Text Available The article deals with the taxonomy, ecology, general distribution and threatened status of Auriculariopsis albomellea Bondartsev Kotl. (Basidiomycetes. In Europe it is known only from Czech Republic, France, Sweden and Ukraine, in Africa from Canary Islands, in North America from Canada and United States. In Poland the fungus was found for the first time in NE part of the country, in a pine forest, on dead twigs of Pinus sylvestris. Habitat and distribution of this saprobic fungus in Africa, Europe and North America are described, list of synonyms and important references are cited, Polish name is proposed.

  18. Market of venison meat in Poland

    OpenAIRE

    GÓRECKA JUSTYNA

    2012-01-01

    In the Polish Hunting Association (an organization of hunting) associated more than one hundred thousand hunters. Only in 2009/2010 was shot more than 41 thousand deers, more than 162 thousand roe deers and more than 196 thousand wild boars. By shooting such quantity the wildlife animals was generated approximately 12-14 thousand tons of venison meat. The market prices of game meat in Poland are on a relatively high level, which translates into a limited interest this product in retail. Avera...

  19. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI

    Directory of Open Access Journals (Sweden)

    C. Gutt

    2017-09-01

    Full Text Available We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q-resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Qz, we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  20. Infectious diseases in Poland in 2014

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Zieliński, Andrzej; Czarkowski, Mirosław P

    The aim of the study is to assess epidemiological situation of infectious and parasitic diseases in Poland in 2014, and an indication of the potential health risks from communicable diseases occurring in other areas of the globe. This paper is a summary of the analysis and evaluation of the results of epidemiological surveillance of infectious diseases in Poland in 2014, and those elements of European and global epidemiological background, which in this period had an impact on the epidemiological situation in Poland or constituted a threat. The main source of data for this study are statistical reports included in annual bulletins “Infectious diseases and poisoning in Poland in 2014” and “Immunizations in Poland in 2014” (NIPH-PZH, GIS, Warsaw 2015) and the data contained in the articles of „Epidemiological chronicle” presented in the Data on deaths are based on the statement of the Department for Demographic Research and Labour Market CSO presenting numbers of deaths from infectious and parasitic diseases registered in Poland in 2014, and in the previous years. Upper respiratory tract infection classified as “suspected flu and the flu season” in the since many years are the largest position among the diseases subject to disease surveillance. In the last decade, particularly large increase in the incidence of upper respiratory tract infection was reported in the flu season 2013., when the increase in comparison to the median of years 2008-2012 amounted to 189.8%. In 2014. Number of reported cases was 3 137 056 which represented a nonsignificant decrease of 0.8% compared with the previous year. However, compared to the median of the years 2008-2012 it was an increase of 187.4%. Better then based on calendar year is a picture obtained by examining the incidence of seasonal periods in the annual, but counted from 1 September to 31 August of the following year. In such a setup, in the 2012/2013 season were recorded 3 025 258 of cases, and in the season

  1. Selected aspects of environmental protection in Poland

    International Nuclear Information System (INIS)

    Obarska-Pempkowaik, Hanna; Bolt, Adam

    2001-01-01

    Environmental deterioration in Poland particularly in 1970's, was a result of an incorrect investment policy and indifferent attitude to the principles of the preservation of nature. Water resources, as part of the environment were affected accordingly. Shortage in water resources is caused by deterioration activity of the industrial, the progressing urban development, overconsumption caused by low prices of water and low status the legislation connected with the natural environment. The European integration processes going on make it necessary to adapt the Polish standards and technological solutions in the sphere of the environmental protection to the standards required by the European Union. The destroyed natural environment cannot secure living at a relatively high standard. Hence the concept of ecological safety based on the conviction that there is no high quality J. life without a high quality of the surrounding environment' has more followers. The main purpose of this paper is to describe the nature and scope of water pollution in Poland with an emphasis on current threats to water quality, with achievements in last decade and background of other European countries. (Original)

  2. Development of optical sciences in Poland

    Science.gov (United States)

    Romaniuk, Ryszard S.

    2013-10-01

    Research and technical communities for optics, photonics and optoelectronics is grouped in this country in several organizations and institutions. These are: Photonics Society of Poland (PSP), Polish Committee of Optoelectronics of SEP, Photonics Section of KEiT PAN, Laser Club at WAT, and Optics Section of PTF. Each of these communities keeps slightly different specificity. PSP publishes a quarterly journal Photonics Letters of Poland, stimulates international cooperation, and organizes conferences during Industrial Fairs on Innovativeness. PKOpto SEP organizes didactic diploma competitions in optoelectronics. KEiT PAN takes patronage over national conferences in laser technology, optical fiber technology and communications, and photonics applications. SO-PTF has recently taken a decision to organize a cyclic event "Polish Optical Conference". The third edition of this conference PKO'2013 was held in Sandomierz on 30.06-04.07.2013. The conference scientific and technical topics include: quantum and nonlinear optics, photon physics, optic and technology of lasers and other sources of coherent radiation, optoelectronics, optical integrated circuits, optical fibers, medical optics, instrumental optics, optical spectroscopy, optical metrology, new optical materials, applications of optics, teaching in optics. This paper reviews chosen works presented during the III Polish Optical Conference (PKO'2013), representing the research efforts at different national institutions.

  3. Energy policies of Poland: 1994 survey

    International Nuclear Information System (INIS)

    1995-01-01

    This survey, conducted in co-operation with the Polish Government as a follow-up to the 1990 IEA Survey of Energy Policies of Poland, is intended to support Polish authorities responsible for designing measures and setting targets for energy policy. Another purpose is to report on progress made since 1990 in adapting the Polish energy sector to the requirements of a market economy. The survey documents and analyses recent developments in energy supply and demand, the energy pricing situation as of late 1994, Poland's energy supply security, the structure of the energy industries and the evolving relationship between the Government, public enterprises and private companies in the energy sector. It also looks at developments and initiatives in energy end-use efficiency and outlines the considerable environmental problems caused by energy production and use. The analysis points to areas where there is a need for further measures, comments on the Government's present policies and makes recommendations for the future. (authors). 41 figs., 51 tabs

  4. Combating illegal nuclear traffic - Poland's experience

    International Nuclear Information System (INIS)

    Smagala, G.

    1998-01-01

    International non-proliferation efforts have been taken to reduce the risk related to nuclear materials and radioactive sources. The physical security of nuclear facilities to prevent acts of sabotage or terrorism and to protect nuclear materials against loss or seizure is an essential element of the nuclear non-proliferation regime. Iraq case and the end of the Cold War have influenced the development of co-operation and openness in many countries. Poland due to: - its geolocation, - a growing number of post Chernobyl contamination transports and - high risk to become a transit country in illicit trafficking of nuclear materials and radioactive sources, initiated deployment of the fixed installation instruments at the border check-points. Since the end of 1990 to now 103 such devices have been installed. Broader involvement in combating illicit nuclear trafficking of Border Guards, Customs Services, Police and Intelligence Security has been noticed. Paper presents Poland's experience in implementing national prevention measures to reduce nuclear proliferation risk and in detecting capabilities against illicit nuclear traffic. (author)

  5. Modeling the Lower Part of the Topside Ionospheric Vertical Electron Density Profile Over the European Region by Means of Swarm Satellites Data and IRI UP Method

    Science.gov (United States)

    Pignalberi, A.; Pezzopane, M.; Rizzi, R.

    2018-03-01

    An empirical method to model the lower part of the ionospheric topside region from the F2 layer peak height to about 500-600 km of altitude over the European region is proposed. The method is based on electron density values recorded from December 2013 to June 2016 by Swarm satellites and on foF2 and hmF2 values provided by IRI UP (International Reference Ionosphere UPdate), which is a method developed to update the IRI model relying on the assimilation of foF2 and M(3000)F2 data routinely recorded by a network of European ionosonde stations. Topside effective scale heights are calculated by fitting some definite analytical functions (α-Chapman, β-Chapman, Epstein, and exponential) through the values recorded by Swarm and the ones output by IRI UP, with the assumption that the effective scale height is constant in the altitude range considered. Calculated effective scale heights are then modeled as a function of foF2 and hmF2, in order to be operationally applicable to both ionosonde measurements and ionospheric models, like IRI. The method produces two-dimensional grids of the median effective scale height binned as a function of foF2 and hmF2, for each of the considered topside profiles. A statistical comparison with Constellation Observing System for Meteorology, Ionosphere, and Climate/FORMOsa SATellite-3 collected Radio Occultation profiles is carried out to assess the validity of the proposed method and to investigate which of the considered topside profiles is the best one. The α-Chapman topside function displays the best performance compared to the others and also when compared to the NeQuick topside option of IRI.

  6. A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kimori, Yoshitaka [Division of Biomolecular Imaging, Institute of Medical Science, The University of Tokyo, Minato-ku, Tokyo 108-8639 (Japan); Department of Bioscience and Bioinformatics, Kyushu Institute of Technology, Iizuka, Fukuoka 820-8502 (Japan); Oguchi, Yosuke [Department of Electric Engineering, Kogakuin University, Hachioji, Tokyo 192-0015 (Japan); Ichise, Norihiko [Department of Visual Communication, Komazawa Women' s University, Inagi, Tokyo 206-8511 (Japan); Baba, Norio [Department of Electric Engineering, Kogakuin University, Hachioji, Tokyo 192-0015 (Japan); Katayama, Eisaku [Division of Biomolecular Imaging, Institute of Medical Science, The University of Tokyo, Minato-ku, Tokyo 108-8639 (Japan)]. E-mail: ekatayam@ims.u-tokyo.ac.jp

    2007-01-15

    Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the 'Structural analysis of single molecules', we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application.

  7. A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

    International Nuclear Information System (INIS)

    Kimori, Yoshitaka; Oguchi, Yosuke; Ichise, Norihiko; Baba, Norio; Katayama, Eisaku

    2007-01-01

    Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the 'Structural analysis of single molecules', we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application

  8. Selected Determinants of Mezzanine Financing in Poland

    Directory of Open Access Journals (Sweden)

    Robert Golej

    2016-01-01

    Full Text Available A very significant form of company activity determining its development and even survival is innovation activity. Raising capital for the implementation of innovation is an important but not the only factor in the introduction of innovation. Characteristics of innovation, and in particular the risk of failure, make for a significant difficulty in obtaining external financing, particularly from third parties, which is an obstacle to their development and implementation. The subject of discussion in the article is the hybrid formula mezzanine type of financing innovative projects implemented both in start-up companies and in already well established companies. The purpose of the article is to discuss the possibilities and to perform an analysis of the practices followed by mezzanine funds in Poland in respect to the innovation activities of Polish companies. Research presented in the article was conducted on the basis of information on investments performed by mezzanine funds in Poland. Of particular importance for the innovativeness of the economy is to have companies from the SME sector, and therefore we also carried out research in this group. Innovations are often initiated in special purpose companies, start-up, etc., that operate in the SME sector. Therefore, the financing of innovation cannot be ignored as a thread of innovation in SMEs. The study involved interviews in several companies in the sector. The study concerned the possibilities of financing innovation involving mezzanine, knowledge of hybrid forms of financing, preparedness for hybrid financing. Studies are not representative, but are rather sounding a view to clarify any further research. Hypothesis: mezzanine financing, utilizing its specific benefits, is increasingly used to finance the gap in the financing of innovation, in particular special purpose companies in the SME sector. So the hypothesis raises two strands of research. The first concerned the financing of innovation

  9. Challenges for developing national climate services – Poland and Norway

    Directory of Open Access Journals (Sweden)

    Zbigniew W. Kundzewicz

    2017-12-01

    Full Text Available This contribution discusses the challenges for developing national climate services in two countries with high fossil fuel production – Poland (coal and Norway (oil and gas. Both countries, Poland and Norway, have highly developed weather services, but largely differ on climate services. Since empirical and dynamical downscaling of climate models started in Norway over 20 years ago and meteorological and hydrological institutions in Oslo and Bergen have been collaborating on tailoring and disseminating downscaled climate projections to the Norwegian society, climate services are now well developed in Norway. The Norwegian Centre for Climate Services (NCCS was established in 2011. In contrast, climate services in Poland, in the international understanding, do not exist. Actually, Poland is not an exception, as compared to other Central and Eastern European countries, many of which neither have their national climate services, nor are really interested in European climate services disseminated via common EU initiatives. It is worth posing a question – can Poland learn from Norway as regards climate services? This contribution is based on results of the CHASE-PL (Climate change impact assessment for selected sectors in Poland project, carried out in the framework of the Polish – Norwegian Research Programme. The information generated within the Polish-Norwegian CHASE-PL project that is being broadly disseminated in Poland can be considered as a substitute for information delivered in other countries by climate services.

  10. Electron and positron contributions to the displacement per atom profile in bulk multi-walled carbon nanotube material irradiated with gamma rays

    International Nuclear Information System (INIS)

    Leyva Fabelo, Antonio; Pinnera Hernandez, Ibrahin; Leyva Pernia, Diana

    2013-01-01

    The electron and positron contributions to the effective atom displacement cross-section in multi-walled carbon nanotube bulk materials exposed to gamma rays were calculated. The physical properties and the displacement threshold energy value reported in literature for this material were taken into account. Then, using the mathematical simulation of photon and particle transport in matter, the electron and positron energy flux distributions within the irradiated object were also calculated. Finally, considering both results, the atom displacement damage profiles inside the analyzed bulk carbon nanotube material were determined. The individual contribution from each type of secondary particles generated by the photon interactions was specified. An increasing behavior of the displacement cross-sections for all the studied particles energy range was observed. The particles minimum kinetic energy values that make probabilistically possible the single and multiple atom displacement processes were determined. The positrons contribution importance to the total number of point defects generated during the interaction of gamma rays with the studied materials was confirmed

  11. Nuclear power component in foresight on energy in Poland

    International Nuclear Information System (INIS)

    Szczurek, J.; Chwaszczewski, S.; Czerski, P.; Luszcz, M.

    2007-01-01

    On behalf of Ministry of Science and Higher Education, the first technology foresight study on future developments in the energy sector is being conducted in Poland. The study aimed to identify energy-related technologies, scenarios, and a mix of energy sources and infrastructure developments that will ensure security of energy supply for Poland. This paper provides a short description of the methodology applied as well as preliminary results and findings of all subtasks of the foresight study referring to the perspective of nuclear power option in Poland, embracing a time horizon of 24 years. (author)

  12. New Localities of Rare Liverworts in the Central Poland

    Directory of Open Access Journals (Sweden)

    Staniaszek-Kik Monika

    2014-11-01

    Full Text Available The present study reports new localities of four liverwort species, i.e., Fossombronia foveolata Lindb., Gymnocolea inflata (Huds. Dumort., Leiomylia anomala (Hook. J.J. Engel & Braggins and Odontoschisma denudatum (Mart. Dumort., found in Central Poland. The new sites are situated in peat bog habitats and swamp forest in the depression cone of lignite opencast mine near Bełchatów in Central Poland. All of the reported species are very rare and have only few localities in Central Poland.

  13. New and rare species of anamorphic fungi for Poland

    Directory of Open Access Journals (Sweden)

    Beata Czerniawska

    2013-12-01

    Full Text Available Morphological characters of and disease symptoms caused by five fungal species parasitizing on plants of the Słowiński National Park and the Drawieński National Park (both located in north-western Poland are presented. Of the species, Ramularia celastri and Ascochyta irpina are new for Poland, and Ascochyta geraniicola, Phyllosticta caricis and Septoriella junci have earlier rarely been found in this country. Moreover, the latter three fungi were found on plants so far not reported in the literature to be their hosts. Finally, the known distribution of the fungi characterized in both Poland and the other regions of the world is presented.

  14. [Dysentery and amoebiasis in Poland in 2010].

    Science.gov (United States)

    Stypułkowska-Misiurewicz, Hanna; Baumann-Popczyk, Anna

    2012-01-01

    Dysentery as infective and contagious disease is registered by all EU and EFTA countries only as shigellosis according to etiological classification of the infectious diseases. The cases are also registered by ECDC. According to ECDC Report for 2006-2008 the incidence rate in Poland Sanitary Stations, send to the National Register of Infectious Diseases, evaluated, calculated and published by Department of Epidemiology National Institute of Public Health (NIZP-PZH) in Annual Bulletin "Infections and Intoxications in Poland in 2010", Warsaw NIZP-PZH and GIS (Chief Sanitary Inspectorate ) 2010. Laboratory data were collected as reports from all Regional Sanitary Laboratories send to NIZP-PZH Department of Bacteriology, data from epidemiological investigation of outbreaks including data from identification of Shigella strains obtained from the Reference Laboratory for Gram-negative Bacilli of NIZP-PZH Bacteriology Department. In 2010 thirty cases of shigellosis were registered (incidence was 0.08/100 000 inhabitants) the same number of cases and incidence was observed in 2009, nearly the same in 2008 - 33 cases (incidence 0.09). The numbers were lower than the median in 2004-2008 (64 cases, incidence 0.17/100 000). According to laboratory reports in all 16 Regional Sanitary Stations only 14 persons were Shigella positive, in spite that more than 600 000 were examined: 10 persons were infected by S. sonnei, 4 by S. flexneri. Only one strain of S. sonnei was isolated from a patient with diarrhea. It was in the Regional Sanitary Station laboratory of the małopolskie voievodeshaft. No one strain of S. boydii or S. dysenteriae was isolated. Most of the dysentery cases were examined by other laboratories than laboratories of sanitary epidemiological service. The obligation of private payment for bacteriological examination of suspected cases is one of reason that patient is treated with antibacterial drugs without determination of etiological agent of the infection. It

  15. The quality of drinking water in Poland

    Directory of Open Access Journals (Sweden)

    L. Kłos

    2015-05-01

    Full Text Available Introduction. An analysis of the drinking water quality and the degree of access to water supply and sewerage system in Poland was conducted. Materials and methods. Method of analysis of secondary statistical data was applied, mostly based on data available in the materials of the Central Statistical Office in Warsaw, the Waterworks Polish Chamber of Commerce in Bydgoszcz and the National Water Management in Warsaw. Result and discussion. 60 % of Poles do not trust to drink water without prior boiling. Water flowing from the taps, although widely available, is judged to be polluted, with too much fluorine or not having the appropriate consumer values (colour, smell and taste. The current water treatment systems can however improve them, although such a treatment, i.e. mainly through chlorination of water, deteriorates its quality in relation to pure natural water. The result is that fewer and fewer Poles drink water directly from the tap. They also less and less use tap water to cook food for which the bottled water is trusted more. Reason for that is that society does not trust the safety of the water supplied by the municipal water companies. The question thus is: Are they right? Tap water in Poland meets all standards since it is constantly monitored by the water companies and all relevant health services. Tap water supplied through the water supply system can be used without prior boiling. Studies have shown that only the operating parameters of water, suc h as taste, odour and hardness, are not satisfactory everywhere, different in each city, and sometimes in different districts of cities, often waking thoughts among users about its inappropriateness. The lowered water value can be easily improved at home through the use of filters. In conclusion, due to constant monitoring and investment in upgrading treatment processes, the quality of tap water has improved significantly in the last years. Conclusion. The results first allow assessing the

  16. CHP plant Legionowo Poland. Description of the electricity market in Poland/CHP-feasibility analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    In 1997, a new energy law was passed in Poland. An important element of the law is that local energy is made obligatory. The law describes obligatory tasks and procedures for the Polish municipalities related to planning and organisation of the energy sector. With the objective of supporting the Polish municipalities in their obligations according to the energy law, the project 'Energy Planning in Poland at Municipal Level - Support to Decision Makers' was launched. As part of the project, Municipal Guideline Reports have been elaborated for three model municipalities. These guidelines present the basis for energy supply plans in the three municipalities. For the city of Legionowo, the following was recommended: 1. The planning processes initiated during the project should be continued/followed up, 2. Master Plan for the district heating system should be prepared, 3. The possibilities of establishment of a major natural gas-fired CHP plant of the combined cycle type should be investigated. The present report describes the electricity market in Poland, the market in which a CHP plant in Legionowo will have to operate. Furthermore the report presents the results of the feasibility analysis carried out for a new CHP plant in Legionowo. (BA)

  17. Application, manufacturing and trends in development of nucleonic gauges in Poland

    International Nuclear Information System (INIS)

    Urbanski, P.

    1998-01-01

    The current status of manufacturing and application of radioisotope gauges in Poland is presented. Metrological performance of the gauges is briefly described and their expected feature prospects on the market of the industrial measuring instruments are discussed. Progress in electronic engineering and common use of the microprocessor systems in the radioisotope gauges made it possible the application of sophisticated methods of signal processing and data treatment, as for example statistical multivariate analysis. Some examples of the multivariate calibration of nucleonic gauges are presented. Application of the partial least square regression (PLS) and artificial neural network (ANN) for the calibration of gauges has been shown. (author)

  18. Comparing Environmental Impact Assessment (EIA) in Poland and Denmark for Road Construction in Relation to Wildlife and Nature Protection : Report for Poland

    DEFF Research Database (Denmark)

    Sienkiewicz, J.; Adrados, L. C.; Briggs, L

    Project : Fauna Passages under Selected Roads in Poland - Education, Monitoring and Construction - Part A. DANCEE M124/031-0212......Project : Fauna Passages under Selected Roads in Poland - Education, Monitoring and Construction - Part A. DANCEE M124/031-0212...

  19. INVENTORY IN POLAND - CURRENT SITUATION AND PROSPECTS

    Directory of Open Access Journals (Sweden)

    O. Kemp

    2017-02-01

    Full Text Available Poland poddavalsya inventory changes. His origins are taking beginning in late and early vosemnadtsatoho devyatnadtsatoho century, when Polish state zahvatchyky sozdaly The first kadastrovыe otchetы. Austria, Prussia and Russia sozdalytry kadastrovыe system, three yspolzuyuschye system recovery country yzmerenyya.Vo TIME 1918 - 1939 Manuscript kadastrovыe bыly oriented work on the creation edynoy nalohovoy system for vsey territory of the country. After the war bыly zavershenы work. Modernization of the cadastre prodolzhalas in the direction Increase the accuracy and quality of data. At present Time Inventory Accounting vkljuchaet buildings, premises and plots zemelnыh, as well tesno svjazana with zemelnыm registers / ypotekoy. Information, soderzhaschayasya in Nam, everybody yspolzuetsya participants in the control nedvyzhymostyu (surveyors, otsenschykamy, brokers and upravlyayuschymy nedvyzhymostyu, courts and admynystratyvnыmy authorities zanymayuschyhsya territorial-prostranstvennыm Planning. Polskoy origins cadastral area. The first records of kadastrovыh measurement bыly sdelanы 4.5 million. Years ago. Poland was once zaklyuchalas Business surveyor in oblahorazhyvanyy. At the end trynadtsatoho century bыla Created rank post of High - korolevskyy podkamernыy, tasks kotorogo All selskohozyaystvennыe and lesnыe uhodya bыly ohvachenы oblastyu pochvovedenyya, classification of land osushchestvljaetsja edynoobrazno for vsey country on grounds ofytsyalnoy classes tablytsы land. THIS classification talk at kachestve and soil fertility. Class is determined on a 6-point scale (8 to pahotnыh land. This allows us to Compare Quality of land in any point of the country. By law dolzhna bыt yspolzovana in the Economic Planning and spatial statistics population in sudebnom and administrative razbyratelstve. All ofysы ymeyut access for cadastre data bases online free. Chastnyya Faces and company mogut Require info sobstvennoy REAL

  20. Poland: biomedical ethics in a socialist state.

    Science.gov (United States)

    Szawarski, Zbigniew

    1987-06-01

    In one of a Hastings Center Report series of four country reports, a professor of ethics discusses the Polish approach to ethical issues in health care. Szawarski begins by outlining five factors that influence the practice of medicine in Poland: a socialist form of government, the influence of the Roman Catholic Church, an ongoing economic crisis, the legacy of the Nazi death camps, and a lack of formal instruction in biomedical ethics. He then discusses three current ethical concerns of physicians, patients, and the public: regulation of physician conduct, abortion, and in vitro fertilization. There is little formal public debate of the issues, however, and physicians seem committed to upholding traditional medical codes of ethics without analyzing underlying moral principles and justifications.

  1. PRISON EDUCATION IN POLAND: SPECIFICS AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Daria Becker-Pestka

    2017-04-01

    Full Text Available The problems presented in the text refer to the education of convicts in Poland. It has been based on current Polish legal regulations, statistical data and specialist literature. The problems which refer to the education of convicts in Poland are regulated by the Act of 6th June 1997, the Executive Penal Code, the Act on the Education System and executive acts to the above-mentioned regulations. The current situation in the labour market requires people to acquire education and to improve their qualifications. People without education, who are excluded from the access to professional development and in-service training, find themselves in an extremely difficult situation. The lack of qualification and vocational skills usually leads to exclusion from the labour market. People who serve their sentences in prisons find themselves in a particularly difficult situation, because their lack of education may push them back into crime. A very positive tendency that may be observed in Poland is a growing demand for prison education. Convicts may acquire knowledge and raise their qualifications at various levels and in various fields. They may follow the curricula at the level of a primary or secondary school; they may pass their Matura certificate and, after the consent of relevant authorities, they can continue their education at the university level. Convicts may also learn a new profession, change their professional qualifications or acquire new additional skills during specialist courses. The qualifications acquired in this way shall meet current demand in the labour market, and convicts may find employment after they leave prisons. Education allows them to improve their self-esteem and self-reliance, to catch up with any deficiencies and to work on their self-discipline. At the same time, education offers opportunities to expand knowledge, to return to the society and to the labour market. It is important for convicts to obtain opportunities for

  2. CERN accelerator school: Introductory course in Poland

    CERN Document Server

    2006-01-01

    For the first time since the CERN Accelerator School (CAS) was set up, the 'Introduction to Accelerator Physics' course was held in Zakopane, Poland. This course was organised together with the National Atomic Energy Agency, Warsaw, and the AGH University of Science and Technology, Cracow, and was held from 1-13 October 2006 at the foot of the Tatra Mountains. The course was very well attended with 113 participants representing 26 different nationalities. Although most of the participants originated from Europe, some students came from countries as far away as Canada, China, India and North America. The intensive programme comprised 35 lectures, 3 seminars given by local Polish lecturers, 5 tutorials where the students were split into four groups, a poster session where students could present their own work and 7 hours of guided and private study. The participants appreciated these study periods, which encouraged collaboration and knowledge-sharing in solving problems and gave them the opportunity to get t...

  3. Rheumatology training in Poland vs. United Kingdom

    Directory of Open Access Journals (Sweden)

    Karina Lazarewicz

    2017-07-01

    Full Text Available When evaluating the quality of Rheumatology specialty training, it can be useful to explore similarities and differences between countries. In this article we compare the training in the UK and Poland. The two training programmes are similar in length and in the competencies that must be achieved, although they do have significant differences in the way the training is structured. The UK-based system is more out-patient based, which can be advantageous, as after completion of training the doctor is more confident in treating common rheumatological problems. On the other hand, having exposure to paediatric rheumatology and orthopaedics like one has in Polish-based training, despite a short placement time, is definitely beneficial for the trainee in gaining all-round knowledge. In conclusion, each system has its merits and can be further enhanced by observing how junior doctors are sub-speciality trained in different countries.

  4. Distribution of some lichenicolous fungi in Poland

    Directory of Open Access Journals (Sweden)

    Krystyna Czyżewska

    2014-08-01

    Full Text Available Nineteen species of lichenicolous fungi collected in 129 localities in Poland in the years 1968 and 1970-2003 are reported in the paper. They are as follows: Athelia arachnoidea (Berk. Jülich, Tremella cladoniae Diederich et M.S. Chrst., T. hypogymniae Diederich et M.S. Chris., T. lichecola Diederich, Clypeococcum hypocenomycis D. Hawksw., Polycoccum superficiale D. Hawksw. et Miądlikowska, Nectria lecanodes Ces., Pronectria erythrinella (Nyl. Lowen, Cortocifraga fuckelii (Rehm D. Hawksw. et R. Sant., C. peltigerae (Nyl. D. Hawksw. et R. Sant., Libertiella malmedyensis Speg. et Roum., Lichenoconium erodens M.S. Christ. et D. Hawksw., L. lecanorae (Jaap D. Hawksw., L. pyxidatae (Oudem. Petrak et Sydow, Vouauxiella lichenicola (Lindsay Petrak et Sydow, Bispora christiansenii D. Hawksw., Illosporium carneum Fr., Karsteniomyces peltigerae (P. Karst. D. Hawksw. and Taeniolella beschiana Diederich.

  5. Mycorrhiza of Dryopteris carthusiana in southern Poland

    Directory of Open Access Journals (Sweden)

    Juliusz Unrug

    2014-08-01

    Full Text Available The research on mycorrhiza of Dryopteris carthusiana from natural sites and those contaminated by heavy metals (Niepołomice Forest, both on lowlands and mountainous areas in Poland, was carried out. Mycorrhizal colonization of Arum-type was higher in ferns growing on tree stumps than in specimens developing directly on the soil. Additionally, an increase in mycorrhiza intensity and arbuscular richness with the rising ground humidity was observed. In comparison to natural sites, mycorrhizas from the areas contaminated by heavy metals were much less developed and the roots were often infected by parasites. Two morphotypes of mycorrhizal fungi have been described The most common was a fine endophyte (Glomales.

  6. FINANCING RENEWABLE ENERGY SOURCES INVESTMENT IN POLAND

    Directory of Open Access Journals (Sweden)

    Jerzy Piotr Gwizdała

    2017-09-01

    Full Text Available In Poland, as in other European Union countries, the project finance structure is used to finance investments in the field of energy. This method investment financing is often used in the world. The upward trend inhibition in recent periods has been due to the global financial crisis and financial instability in the euro zone. On account of the necessity to develop the energy infrastructure associated with renewable sources, the considerable strengthening in the use of project finance techniques can be expected. The particular progression may be observed in the case of public-private partnership (ppp, where public investments are carried out by private companies. Companies, in case of investment realization in the field of ppp, almost always use project finance, because it is a beneficial way to separate the risks associated with an investment from the balance sheet of the compa-ny.

  7. Infectious diseases in Poland in 2015

    Science.gov (United States)

    Sadkowska-Todys, Małgorzata; Zieliński, Andrzej; Czarkowski, Mirosław P.

    2017-01-01

    This is the next annual analysis of the situation of infectious and parasitic diseases in Poland in 2015 within the framework of the Epidemiological Chronicle of Przegląd Epidemiologiczny - Epidemiological Review. Its purpose is to identify potential threats to the health of populations from infectious diseases occurring in Poland with reference to other parts of the globe. This paper is an introduction to more detailed studies of the epidemiological situation of selected infectious diseases and summarizes the results of the surveillance of infectious diseases in Poland in 2015. References to epidemiological situation in other countries are limited to situations that may affect current or potential occurrence of the disease in Poland. The main source of epidemiological information for this summary is the data from the reports of the State Sanitary Inspection included in the annual bulletins “Infectious Diseases and Poisonings in Poland in 2015” and “Vaccination in Poland in 2015” (1, 2). The epidemiological situation of particular diseases is further elaborated in the Epidemiological Chronicle of the same issue of the Epidemiological Review. Data on deaths are based on the presentation of the Demographic and Labor Market Department of the Central Statistical Office on deaths from infectious and parasitic diseases registered in Poland in 2015 and earlier. For a long time, the most common diseases among epidemiological surveillance it is upper respiratory tract infections classified as “influenza and suspected influenza”. In 2015, the number of cases was 3,843,438 (9 994,7 / 100,000). As to compare with the 2014’s incidence, this was an increase of 22.6%. In 2015, incidence of intestinal infections with etiology of salmonella increased by 2.8% compared to the previous year, but compared to the median of 2009-2013 was 2.5% lower. A serious epidemiological problem is a strong upward trend in nosocomial infections including infections caused by

  8. OZONE CONCENTRATION ATTRIBUTABLE PREMATURE DEATH IN POLAND

    Directory of Open Access Journals (Sweden)

    Krzysztof Skotak

    2010-03-01

    Full Text Available Ozone in the lower part of the atmosphere (troposphere, strong photochemical oxidant, is not directly emitted to the atmosphere but formed through a series of complex reactions. Ozone concentrations depends on ozone precursors air contamination (mainly nitrogen dioxide and non-methane volatile organic compounds and meteorological conditions (temperature and solar radiation. The main sectors emitted ozone precursors are road transport, power and heat generation plants, household (heating, industry, and petrol storage and distribution. Ozone and some of its precursors are also transported long distances in the atmosphere and are therefore considered a transboundary problem. As a result, the ozone concentrations are often low in busy urban areas and higher in suburban and rural areas. Nowadays, instead of particulate matter, ozone is one of the most widespread global air pollution problems. In and around urban areas, relatively large gradients of ozone can be observed. Because of its high reactivity in elevated concentrations ozone causes serious health problems and damage to ecosystems, agricultural crops and materials. Main ill-health endpoints as a results of ozone concentrations can be characterised as an effect of pulmonary and cardiovascular system, time morbidity and mortality series, development of atherosclerosis and asthma and finally reduction in life expectancy. The associations with increased daily mortality due to ozone concentrations are confirmed by many researches and epidemiological studies. Estimation of the level selected ill-health endpoints (mortality in total and due to cardiovascular and respiratory causes as a result of the short-term ozone exposure in Poland was the main aim of the project. Final results have been done based on estimation method elaborated by WHO, ozone measurements from National Air Quality Monitoring System and statistical information such as mortality rate and populations. All analysis have been done in

  9. Calibration procedures for mammography dosemeters in Poland

    International Nuclear Information System (INIS)

    Gwiazdowska, B.; Ulkowski, P.; Tolwinski, J.; Bulski, W.

    2002-01-01

    Breast cancer is the most frequent tumour in women and the effectiveness of the treatment depends dramatically on the early detection of the disease. That is the reason why in Poland the mammography control examinations are strongly supported by the Centre of Oncology. In Poland there are over 400 mammography units which account for about 300,000 examinations per year. An investigation performed by the Medical Physics Department of the Centre of Oncology in Warsaw at about 100 mammography facilities proved that in most cases the doses absorbed by the patients could be reduced without decrease of image quality. This is one of the reasons why the Polish Secondary Standard Dosimetry Laboratory (SSDL) dealing mainly with calibration of radiotherapy dosemeters is extending its activities and therefore new facilities and equipment adapted for calibration of mammographic dosemeters have been installed. The mammography dosimetry calibration equipment is permanently installed in the same laboratory room where the radiotherapy dosemeters are calibrated. A base of a mammography unit no longer in clinical use, together with its movable system has been adapted to handle ionization chamber holders. An X-ray tube with a 50 kV high frequency generator was also installed. The tube, a Varian type OEG-50-2, (designed for laboratory applications) with molybdenum anode of an anode angle 23,7 deg. and with a large focus, effective size approximately 5 mm 2 , has an inherent filtration of 0,25 mm beryllium. It is installed in a housing with 2mm lead shielding; a cone shaped beam is formed by a system of three collimators

  10. Industrial applications of electron beam

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    1997-01-01

    The review of industrial applications with use of electron beams has been done. Especially the radiation technologies being developed in Poland have been shown. Industrial installations with electron accelerators as radiation source have been applied for: modification of polymers; modification of thyristors; sterilization of health care materials; radiopreservation of food and other consumer products; purification of combustion flue gases in heat and power plants. 14 refs, 6 tabs, 7 figs

  11. MACROECONOMIC CONDITIONS OF BANKRUPTCY OF ENTERPRISES IN POLAND

    Directory of Open Access Journals (Sweden)

    Anna Bieniasz

    2014-12-01

    Full Text Available The main purpose of this work is to analyse the phenomenon of enterprises’ bankruptcy in Poland in 2004-2013 and attempt to build regression models defining the relationship between the number of bankrupted companies and selected macroeconomic parameters of the national economy. The analysis is based on Coface Poland reports presenting the phenomenon of bankruptcy in Poland of branches, provinces, legal forms of companies and types of bankruptcy proceedings. Studies have shown that the greatest risk of bankruptcy refers to metals production and fabricated metal products enterprises, manufacture of food products and beverages, wholesale trade, construction, micro and small enterprises, enterprises under the age of 10 years and companies from Mazovia region, Silesia and Lower Silesia. The estimated parameters of the regression models showed that the number of bankruptcies in Poland is strongly determined i.a. by the number of registered companies, GDP growth, dynamics of changes in fixed capital formation and changes in foreign exchange rates.

  12. The large superpredators' teeth from Middle Triassic of Poland

    Science.gov (United States)

    Surmik, Dawid; Brachaniec, Tomasz

    2013-09-01

    An unusual large teeth, finding from time to time in marine sediments of Muschelkalk, Silesia, Poland indicate the superpredators occurrence. According to size and morphological features the teeth are similar to archosaurs or giant marine reptiles.

  13. Civil Military Relations and Defense Reform in Poland

    National Research Council Canada - National Science Library

    Tomaszycki, Marek

    2006-01-01

    .... From the beginning, these changes in the European order included security problems. This paper describes changes in the national security of Poland since 1989 with a focus on the Polish Armed Forces (PAF...

  14. Soil Contamination at the Historical Zn-Pb Ore Mining Sites (Southern Poland

    Directory of Open Access Journals (Sweden)

    Aleksander-Kwaterczak U.

    2013-04-01

    Full Text Available Results of metals analyses in soil profiles sampled at two 18/19th century mine shafts of the Trzebinia lead-zinc ore mining region in southern Poland are presented. Waste dump sites located at these shafts exhibit initial pedogenesis with clear differences in zinc and cadmium content between soil horizons which changes in depth across each of the investigated dump. The highest metal concentrations occur in horizons containing excavated ore-bearing Triassic dolomites, soils buried beneath are less polluted whereas, initial A0 soil horizons are virtually unpolluted. Relatively low downward metal migration in profiles to the horizons underlying the dumps is related to alkaline pH of soils. Migration appear to be important in the more acidic soils of outer zones in the two dump sites overgrown either with coniferous and deciduous trees.

  15. Privatization and Corporate Governance in Poland: Problems and Trends

    OpenAIRE

    Piotr Kozarzewski

    2006-01-01

    The paper is devoted to the problems of the impact of privatization on corporate governance formation in Poland. It discusses the dilemmas of choosing a model for privatization and corporate governance, legal background, mechanisms of corporate governance formation depending on a privatization method applied, and the evolution of these structures in the course of systemic transformation in Poland. The Author comes to the conclusion that the processes of privatization and corporate governance ...

  16. Reliability of Power Units in Poland and the World

    OpenAIRE

    Józef Paska

    2015-01-01

    One of a power system’s subsystems is the generation subsystem consisting of power units, the reliability of which to a large extent determines the reliability of the power system and electricity supply to consumers. This paper presents definitions of the basic indices of power unit reliability used in Poland and in the world. They are compared and analysed on the basis of data published by the Energy Market Agency (Poland), NERC (North American Electric Reliability Corporation – USA), ...

  17. Cooperative business models in steel enterprises in Poland

    Directory of Open Access Journals (Sweden)

    W. Sroka

    2013-10-01

    Full Text Available The paper presents the concept of cooperative business models in steel enterprises in Poland. The starting point is the presentation of the concept of business models, which is defined as a way of doing business based on cooperation between enterprises. This paper presents two collaborative business models, namely outsourcing and alliance networks, comparing the theoretical assumptions with the results of research carried out in steel enterprises in Poland.

  18. Test of the Bank Lending Channel: The Case of Poland

    Directory of Open Access Journals (Sweden)

    Yu HSING

    2013-11-01

    Full Text Available This paper tests the bank lending channel for Poland based on a simultaneousequation model consisting of demand for and supply of bank loans. The three-stage least squares method is employed in empirical work. This paper finds support for a bank lending channel for Poland. Expansionary monetary policy through a lower money market rate or open market purchase of government bonds to increase bank reserves/deposits would increase bank loan supply.

  19. Estimation of weights for the Monetary Conditions Index in Poland

    OpenAIRE

    Andrzej Toroj

    2008-01-01

    In this paper, we follow the econometric approach to assess relative importance of real interest rate and real exchange rate for the monetary conditions in Poland, quantified as weights for Monetary Conditions Index (MCI). We consider both single- and multiple-equation specifications proposed in the literature with an application to Poland. Although MCI is nowadays broadly considered a rather obsolete indicator in monetary policy conduct, we argue that the econometric framework used for this ...

  20. Do Cooperative Banks Really Serve Agricultural Sector in Poland?

    OpenAIRE

    Zawojska, Aldona; Siudek, Tomasz

    2005-01-01

    The aim of the paper is to assess the potential of cooperative banks for serving agricultural sector in Poland and to identify the areas with the most development potential. We discuss the transformation process in the cooperative banking system under market economy, and in particular investigate importance of cooperative banks for farms' financing on the basis of our survey of banks. Moreover, the role of cooperative banks in transmission of Government policy supporting farm sector in Poland...

  1. Materials of conference: Hydrogeological Problems of South-West Poland

    International Nuclear Information System (INIS)

    1996-01-01

    Hydrogeological problems of South-west Poland is the collection of conference papers held in Szklarska Poreba on 20-22 June 1996. The materials have been gathered in three topical groups: water quality problems in hydrological cycle, regional hydrogeology of South-west Poland, theoretical problems and research methods in hydrogeology. More of performed articles have a interdisciplinary character taking into account the precipitation and surface water quality and their influence on ground water features

  2. Puccinia scillae (Uredinales, a new species for Poland

    Directory of Open Access Journals (Sweden)

    Małgorzata Ruszkiewicz-Michalska

    2014-08-01

    Full Text Available The paper presents a rust species new for Poland, that affects the ornamental plant Scilla siberica Haw. The distribution of the fungus and its host plants, both introduced and native in Europe, have been investigated. The data from neighbouring countries indicate that the parasite has been probably overlooked in Poland till now. There is a possibility, however, that the species is currently spreading in central and north-eastern Europe.

  3. Soft restructuring process in metallurgical enterprises in Poland

    Directory of Open Access Journals (Sweden)

    B. Gajdzik

    2015-10-01

    Full Text Available This article presents the range and outcomes of soft restructuring in metallurgical enterprises in Poland. The term ‘soft restructuring’ applies to changes in metallurgical enterprises’ employment policy during the period of political transformation in Poland. Steelworks performance under the market economy conditions demanded introducing changes in staff resources. Changes referred both to the staff structure as well as employees’ skills and gradual engaging of the staff in building the steelworks’ competitive advantage.

  4. Implementation of a cloud-based electronic medical record exchange system in compliance with the integrating healthcare enterprise's cross-enterprise document sharing integration profile.

    Science.gov (United States)

    Wu, Chien Hua; Chiu, Ruey Kei; Yeh, Hong Mo; Wang, Da Wei

    2017-11-01

    In 2011, the Ministry of Health and Welfare of Taiwan established the National Electronic Medical Record Exchange Center (EEC) to permit the sharing of medical resources among hospitals. This system can presently exchange electronic medical records (EMRs) among hospitals, in the form of medical imaging reports, laboratory test reports, discharge summaries, outpatient records, and outpatient medication records. Hospitals can send or retrieve EMRs over the virtual private network by connecting to the EEC through a gateway. International standards should be adopted in the EEC to allow users with those standards to take advantage of this exchange service. In this study, a cloud-based EMR-exchange prototyping system was implemented on the basis of the Integrating the Healthcare Enterprise's Cross-Enterprise Document Sharing integration profile and the existing EMR exchange system. RESTful services were used to implement the proposed prototyping system on the Microsoft Azure cloud-computing platform. Four scenarios were created in Microsoft Azure to determine the feasibility and effectiveness of the proposed system. The experimental results demonstrated that the proposed system successfully completed EMR exchange under the four scenarios created in Microsoft Azure. Additional experiments were conducted to compare the efficiency of the EMR-exchanging mechanisms of the proposed system with those of the existing EEC system. The experimental results suggest that the proposed RESTful service approach is superior to the Simple Object Access Protocol method currently implemented in the EEC system, according to the irrespective response times under the four experimental scenarios. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Nuclear medicine training and practice in Poland

    International Nuclear Information System (INIS)

    Teresinska, Anna; Birkenfeld, Bozena; Krolicki, Leszek; Dziuk, Miroslaw

    2014-01-01

    In Poland, nuclear medicine (NM) has been an independent specialty since 1988. At the end of 2013, the syllabus for postgraduate specialization in NM has been modified to be in close accordance with the syllabus approved by the European Union of Medical Specialists and is expected to be enforced before the end of 2014. The National Consultant in Nuclear Medicine is responsible for the specialization program in NM. The Medical Center of Postgraduate Training is the administrative body which accepts the specialization programs, supervises the training, organizes the examinations, and awards the specialist title. Specialization in NM for physicians lasts for five years. It consists of 36 months of training in a native nuclear medicine department, 12 months of internship in radiology, 3 months in cardiology, 3 months in endocrinology, 3 months in oncology, and 3 months in two other departments of NM. If a NM trainee is a specialist of a clinical discipline and/or is after a long residency in NM departments, the specialization in NM can be shortened to three years. During the training, there are obligatory courses to be attended which include the elements of anatomy imaging in USG, CT, and MR. Currently, there are about 170 active NM specialists working for 38.5 million inhabitants in Poland. For other professionals working in NM departments, it is possible to get the title of a medical physics specialist after completing 3.5 years of training (for those with a master's in physics, technical physics or biomedical engineering) or the title of a radiopharmacy specialist after completing 3 years of training (for those with a master's in chemistry or biology). At present, the specialization program in NM for nurses is being developed by the Medical Centre of Postgraduate Education. Continuing education and professional development are obligatory for all physicians and governed by the Polish Medical Chamber. The Polish Society of Nuclear Medicine (PTMN) organizes regular

  6. Two steps back: Poland's new abortion law.

    Science.gov (United States)

    Nowicka, W

    1993-06-01

    After the fall of Communism in Poland, the Catholic church exerted pressure to increase its influence in public life. One way in which this pressure has manifested itself has been in the passing of a restrictive abortion bill which was signed into law on February 15, 1993. Abortion had been legalized in Poland in 1956 and was used as a means of birth control because of a lack of availability and use of contraceptives. The number of abortions performed was variously reported as 60,000 - 300,000/year. In 1990, the Ministry of Health imposed restrictions on abortions at publicly funded hospitals, and 3 deaths were reported from self-induced abortions. In 1 year (1989-90), the number of induced abortions at 1 hospital dropped from 71 to 19, while the number of self-induced abortions increased from 48 to 85. Further restrictions were introduced in May 1992 as part of the "Ethical Code for Physicians," which allows abortions only in cases where the mother's life or health is in danger or in cases or rape. This code brought abortions to a halt at publicly funded hospitals and doubled or even tripled the cost of private abortions. Women have been refused abortions in tragic and life=threatening situations since the code was adopted. When an outright anti family planning bill was drafted in November 1992, the Polish citizenry collected 1,300,000 signatures to force a referendum. The referendum was not held, but the bill was defeated. The amended bill which passed allows abortions in publicly funded hospitals only when the mother's life or health is in danger and in cases of rape, incest, or incurable deformity of the fetus. The implications of this law remain unclear, since its language is strange and vague. The reproductive rights of Polish women face a further threat because the Catholic church is working to limit the availability of contraceptive methods which they deem to be "early abortives." On the other side of the issue, the Federation for Women and Planned

  7. Abdominal aortic aneurysm screening program in Poland.

    Science.gov (United States)

    Jawien, A; Formankiewicz, B; Derezinski, T; Migdalski, A; Brazis, P; Woda, L

    Screening for abdominal aortic aneurysms (AAA) is currently recommended by several vascular societies. In countries where it has been introduced the prevalence of AAAs differed greatly and was mainly related to cigarette smoking. The screening program also had an enormous impact on the decrease of AAA ruptures and reduced mortality rate. These facts have led to the introduction of the first screening program for AAAs in Poland. The aim of the study was to determine the prevalence of AAAs among men aged 60 years and older undergoing ultrasound examination of the abdominal aorta. A single ultrasonography of the abdomen was performed to assess the aorta from the renal arteries to the bifurcation and the diameter of the aorta was measured at its widest point. The cut-off value for determining an aortic aneurysm was set at a diameter of ≥ 30 mm. All ultrasonography measurements were performed by physicians in outpatient departments throughout the Kuyavian-Pomeranian Province. Additionally, each subject had to fill out a questionnaire with demographic data, smoking habits, existing comorbidities and familial occurrence of AAAs. The study was conducted from October 2009 to November 2011. The abdominal aorta ultrasound examinations were carried out in 1556 men aged 60 years and older. The prevalence of AAA in the study population was 6.0 % (94 out of 1556). The average age of the men was 69 years (SD 6 years, range 60-92 years). In the study population 55 % of the men smoked or had smoked and 3 % were aware of the presence of AAAs in family members. There were three risk factors significantly associated with the presence of AAAs: age (p < 0.05), smoking (72.3 % vs 53.9 %, p = 0.004) and family history of AAAs (9.6 % vs 2.7 %, p = 0.017). The prevalence of AAAs among men in Poland is higher than in other European countries and the USA. The screening program for AAAs is an easy and reliable method for detecting early stages of the disease and

  8. Nuclear medicine training and practice in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Teresinska, Anna [Institute of Cardiology, Department of Nuclear Medicine, Warsaw (Poland); Birkenfeld, Bozena [Pomeranian Medical University, Department of Nuclear Medicine, Szczecin (Poland); Krolicki, Leszek [Warsaw Medical University, Department of Nuclear Medicine, Warsaw (Poland); Dziuk, Miroslaw [Military Institute of Medicine, Department of Nuclear Medicine, Warsaw (Poland)

    2014-10-15

    In Poland, nuclear medicine (NM) has been an independent specialty since 1988. At the end of 2013, the syllabus for postgraduate specialization in NM has been modified to be in close accordance with the syllabus approved by the European Union of Medical Specialists and is expected to be enforced before the end of 2014. The National Consultant in Nuclear Medicine is responsible for the specialization program in NM. The Medical Center of Postgraduate Training is the administrative body which accepts the specialization programs, supervises the training, organizes the examinations, and awards the specialist title. Specialization in NM for physicians lasts for five years. It consists of 36 months of training in a native nuclear medicine department, 12 months of internship in radiology, 3 months in cardiology, 3 months in endocrinology, 3 months in oncology, and 3 months in two other departments of NM. If a NM trainee is a specialist of a clinical discipline and/or is after a long residency in NM departments, the specialization in NM can be shortened to three years. During the training, there are obligatory courses to be attended which include the elements of anatomy imaging in USG, CT, and MR. Currently, there are about 170 active NM specialists working for 38.5 million inhabitants in Poland. For other professionals working in NM departments, it is possible to get the title of a medical physics specialist after completing 3.5 years of training (for those with a master's in physics, technical physics or biomedical engineering) or the title of a radiopharmacy specialist after completing 3 years of training (for those with a master's in chemistry or biology). At present, the specialization program in NM for nurses is being developed by the Medical Centre of Postgraduate Education. Continuing education and professional development are obligatory for all physicians and governed by the Polish Medical Chamber. The Polish Society of Nuclear Medicine (PTMN) organizes

  9. Nuclear Physics in Poland 1996-2006

    International Nuclear Information System (INIS)

    Broda, R.; Dobaczewski, J.; Jastrzebski, J.; Palacz, M.; Styczen, J.

    2007-12-01

    This Report is a result of the Polish Nuclear Physics Network (PNPN) action having as objective the mapping study of the basic and applied research in this domain in Poland. In the often employed slang it constitutes one of the '' deliverables '' of the EWON (East-West Outreach) Network, operating within the I3- (Integrated Infrastructure Initiative) EURONS, one of the Nuclear Physics projects in the Six Framework Programme (FP6). However, although prepared within the nuclear structure EURONS framework, this mapping study also reports on the activities in the hadron physics in Poland (organized in the FP6 within a second Nuclear Physics project I3-Hadron Physics) as well as in Nuclear Theory and Applications of Nuclear Physics. The Report contains references to activities and published papers from the last ten years: 1996 - 2006. In some cases also slightly older data are included, if necessary, for the completeness of the reported subjects. The Report is organized as follows. After the information on Polish Nuclear Physics Network (a part of the EWON Network), a few overview papers describe the main domains of the PNPN scientific activity. The contents of these papers were previously presented during the NuPECC meeting, held in Krakow June 9, 2006. A number (89) of more detailed contributions (together with appropriate references) emanating from various research groups follows the review articles. Some of the contributions provide concise summaries of wide research activities. Other authors preferred to report separately or individually on narrower topics. Most of the presented activities were conducted within the international collaborations. However, the adopted policy was that only Polish researchers are indicated as authors of the contributions, whereas the international collaborations are reflected by (all) authors of cited publications. The Polish Nuclear Physics Long-Range Plan prepared recently by the Nuclear Physics Committee of the National Atomic Energy

  10. Liandratite from Karkonosze pegmatites, Sudetes, Southwestern Poland

    Science.gov (United States)

    Matyszczak, Witold

    2018-06-01

    The chemical composition of liandratite, U6+(Nb,Ta)2O8, was determined from material collected in Niobium, Yttrium, Fluorine type (NYF) pegmatites of the Karkonosze intrusion (Sudetes, SW Poland). Liandratite occurs mainly as rims, up to 40 µm thick, and fracture infillings in fergusonite-(Y) and other Nb-Ta-Ti minerals. Its formation was related to the fluid-driven alteration of primary minerals by three potential mechanisms: (i) direct replacement of a primary mineral by liandratite; (ii) breakdown of the primary mineral to liandratite and a product with the composition of minerals of the pyrochlore group; (iii) multistage alteration, which involved: removal of A-site cations (mostly Y + REE with the exception of U4+) and formation of phases with the composition of pyrochlore group minerals; then crystallization of U-, Bi-, Pb-rich pyrochlores and their replacement by liandratite. The chemical compositions of liandratite formed by the breakdown of different primary minerals are also different, mainly in their U, Ti and Nb contents. Excess Ti, relative to the U6+Nb2O8 end-member, is incorporated into the structure together with additional U. The Ti content of liandratite, and partially through this the U content, are dependent on the nature of the precursor mineral.

  11. Radioactive Contamination of Agricultural Products in Poland

    International Nuclear Information System (INIS)

    Muszynski, W.; Grabowski, D.; Rubel, B.; Kurowski, W.; Swietochowska, J.; Smagala, G.

    2003-01-01

    Radiological contamination of the environment is caused by nuclear activities on the globe: nuclear weapon tests and the Chernobyl accident. The transfer of radionuclides to the organism via ingestion is one of the sources of doses obtained by people. To assess the doses received by humans the intake of isotopes with daily diet was defined. The concentration of radionuclides in foodstuffs was determined. The network of Service for Measurement of Radioactive Contamination systematically controls all kinds of important agricultural products such as milk, meat, vegetables, fruit, cereals and forest products: mushrooms, blueberries etc. Measurement stations involved in food monitoring act within Sanitary-Epidemiological Stations, Veterinary Hygiene Units and Chemical-Agricultural Stations. All activities are co-ordinated by the Central Laboratory for Radiological Protection. The level of activity of caesium isotopes has regularly been monitored in collected samples originating from different administrative districts of Poland. Since 1994 the 134 Cs concentration has been below the detection limit. The activity of 137 Cs has been measured to determine long-term effect of the accident on the contamination of milk, meat and other foodstuffs. (orig.)

  12. Development trends in mining technologies. [Poland

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W

    1983-01-01

    Research programs on underground black coal mining in Poland are discussed. It is assumed that no major technology changes will take place by the year 2000. Second generation of mining technologies will be used after the year 2000. The following technologies of the second generation are discussed: in-situ gasification, chemical coal disintegration, manless hydraulic mining with hydraulic transport. Research programs on technologies of the second generation should guarantee their commercial and economic use by the year 2000. The following targets for research programs aimed at increasing productivity, reducing mining cost, reducing labor and increasing safety in mining, covering the next 2 decades are comparatively evaluated: increasing advance rate of longwall faces, increasing machine time of integrated face systems by at least 20%, improving design of powered supports for eliminating rock falls, development of heavy-duty face systems for longwall mining with hydraulic stowing, development of face systems for mining thick coal seams on their whole thickness, slice mining thick coal seams with artificial roofs, bidirectional longwall mining by shearer loaders, use of more elastic and reliable mining systems.

  13. External quality audits in radiotherapy in Poland

    International Nuclear Information System (INIS)

    Bulski, W.; Rostkowska, J.; Kania, M.; Gwiazdowska, B.

    2002-01-01

    The Secondary Standard Dosimetry Laboratory (SSDL) of the Medical Physics Department of the Centre of Oncology in Warsaw is a continuation of the Radiation Measurements Laboratory created in 1937, following the suggestions of Marie Curie, the founder of the Institute. The present SSDL is a member of the WHO/IAEA international network and is periodically audited by the International Atomic Energy Agency. The SSDL is in charge of the calibration of all radiotherapy dosimeters in Poland, and it also co-ordinates all activities carried out in radiotherapy quality assurance programmes nation-wide. The External Audit Group (EAG) was set-up according to the recommendations of the IAEA, as a part of the SSDL. The EAG is in charge of the management of the project and organization of the TLD measurements. The SSDL takes the responsibilities of the metrological aspects of the programme. The results of the efforts, aimed at the development of a quality audit programme and methodology in radiotherapy, are presented

  14. Thallium in mineral resources extracted in Poland

    Directory of Open Access Journals (Sweden)

    Bojakowska I.

    2013-04-01

    Full Text Available Thallium concentrations in primary mineral commodities extracted in Poland and processed in high temperatures were determined by ICP-MS method. Samples of hard and brown coal, copper-silver and zinclead ores, argillaceous and calcareous rocks of different genesis and age were analyzed. The highest thallium concentrations occur in the zinc-lead ores, the average content being of 52.1 mg/kg. The copper ores contain in average 1.4 mg/kg of thallium. Hard coals from the Upper Silesian Coal Basin display higher thallium content than those exploited in the Lublin Coal Basin. Brown coals from Turow deposit distinguish by much higher values, 0.7 mg/kg Tl, than those from huge Bełchatów and smaller Konin-Turek region deposits. Average thallium concentrations in clays used for ceramic materials are lower than 1 mg/kg, except of Mio-Pliocene Slowiany deposit. The average content of thallium in the studied limestone and dolomite raw materials for cement, lime, and metallurgical flux, and refractories is very low in comparison to the average amounts in the world carbonate rocks.

  15. Science popularization and European citizenship in Poland

    Directory of Open Access Journals (Sweden)

    Jacek Piotr Szubiakowski

    2007-09-01

    Full Text Available The idea to link European citizenship and science education is surely new and uncommon in Poland, but we think, as SEDEC project, that can enrich both the panorama of science popularization outside and inside school system. I checked carefully curricula for every stage of school education looking for the topics concerning the developing of the European citizenship. I found that they are usually connected to the history, geography and some activities developing of the knowledge about generally defined citizenship. The spare topics connected directly to the science are present especially in grammar school curriculum. They may be divided into three groups: exploiting the common heritage, common object of interest and scientific community respectively. In that paper I would like to show how the activities in each of the group may influence the EU citizenship developing process. I am going to emphasize the good choice of science as a context or a medium for EU citizenship education. It may be an important point especially in Central Europe. Additionally I would like to present some auxiliary events that are enable through the external educational resources such as museum and planetarium.

  16. The Development of Explosive Metalworking in Poland

    Directory of Open Access Journals (Sweden)

    Babul W.

    2014-10-01

    Full Text Available The author coordinated the research in Poland by the collaboration with civil and military scientific and research centres. In result they elaborated detonation process of spraying coats designed and constructed stands equipped with detonative devices, they also elaborated the techniques of basic coating parameter measurement and built devices for commercial and scientific services. In the research the author's achievements within the range of explosive welding have been used. The experience of the scientific teams was very effective. It was observed that many phenomena that take place in the processes of detonative layer coating and explosive welding are the same. In order to obtain a required connection the plastic strain of the connected material surfaces has to be achieved and cumulative flows have to be formed. There are a similar range of the connecting process conditions and the mechanisms of plastic strain. The highest connection strength is obtained when an intermediate zone is formed. The zone has to be composed of the two connected materials. The intermediate layer is formed as a result of mechanical alloying of the materials due to large plastic strain. The plastic strain leads to forming meta-stable phases that have properties of pseudo solid solution, chemical compounds, intermetallic phases and fragmentation corresponding to nanomaterials and amorphous states.

  17. Have combustible cigarettes met their match? The nicotine delivery profiles and harmful constituent exposures of second-generation and third-generation electronic cigarette users.

    Science.gov (United States)

    Wagener, Theodore L; Floyd, Evan L; Stepanov, Irina; Driskill, Leslie M; Frank, Summer G; Meier, Ellen; Leavens, Eleanor L; Tackett, Alayna P; Molina, Neil; Queimado, Lurdes

    2017-03-01

    Electronic cigarettes' (e-cigarettes) viability as a public health strategy to end smoking will likely be determined by their ability to mimic the pharmacokinetic profile of a cigarette while also exposing users to significantly lower levels of harmful/potentially harmful constituents (HPHCs). The present study examined the nicotine delivery profile of third- (G3) versus second-generation (G2) e-cigarette devices and their users' exposure to nicotine and select HPHCs compared with cigarette smokers. 30 participants (10 smokers, 9 G2 and 11 G3 users) completed baseline questionnaires and provided exhaled carbon monoxide (eCO), saliva and urine samples. Following a 12-hour nicotine abstinence, G2 and G3 users completed a 2-hour vaping session (ie, 5 min, 10-puff bout followed by ad libitum puffing for 115 min). Blood samples, subjective effects, device characteristics and e-liquid consumption were assessed. Smokers, G2 and G3 users had similar baseline levels of cotinine, but smokers had 4 and 7 times higher levels of eCO (pe-cigarette liquids with significantly lower nicotine concentrations. During the vaping session, G3 users achieved significantly higher plasma nicotine concentrations than G2 users following the first 10 puffs (17.5 vs 7.3 ng/mL, respectively) and at 25 and 40 min of ad libitum use. G3 users consumed significantly more e-liquid than G2 users. Vaping urges/withdrawal were reduced following 10 puffs, with no significant differences between device groups. Under normal use conditions, both G2 and G3 devices deliver cigarette-like amounts of nicotine, but G3 devices matched the amount and speed of nicotine delivery of a conventional cigarette. Compared with cigarettes, G2 and G3 e-cigarettes resulted in significantly lower levels of exposure to a potent lung carcinogen and cardiovascular toxicant. These findings have significant implications for understanding the addiction potential of these devices and their viability/suitability as aids to

  18. Towards Establishing of National Centre of Synchrotron Radiation in Poland

    International Nuclear Information System (INIS)

    Kolodziej, J.J.; Szymonski, M.

    2004-01-01

    Synchrotron radiation facilities (SRF) are established part of contemporary world research landscape. They facilitate fast advances of life, health, and physical sciences as well as development of new technologies. The extent of synchrotron radiation (SR) use has been growing up steadily for the last two decades all over the world and it is anticipated that the growth will continue in future. Growing community of SR users has generated increasing demand for the beam-time in infrared, vacuum UV and X-ray ranges. In response, many new SR facilities are now being constructed and planned, not only in large countries of strong economy but also in developing countries. It is expected that such trends will be followed in other parts of the world. No doubt, the ''cutting edge'' of research activity will continue to create the demand for beams of higher brightness, flux and photon energy but it is predictable that the increasing fraction of research done presently with laboratory radiation sources will be shifting towards small-scale SR facilities. Several hundred Polish scientists, a meaningful fraction of all SR users, take part in experiments using synchrotron sources all over the world. Many of them belong to the Polish Synchrotron Radiation Society - an active body promoting the use of SR. Present European Union priorities include knowledge, research and innovation as the key priorities and a pillar of development and stable welfare of Europe. Poland as a new member of EU will have to conform to the EU policy. The government strategy assumes a fast increase of investments in research and development sector starting from 2005. No other scientific research installations has had such major impact on advances in science an technology as the SRF. It is obvious that the time is ripe now for establishing a National Centre of Synchrotron Radiation in Poland. Recently, several Polish educational and research institutions constituted around the idea of Polish SRF. The initiative

  19. Poland: A Dark Side of Church Cultural Policy

    Directory of Open Access Journals (Sweden)

    Szocik Konrad

    2015-12-01

    Full Text Available The cultural policy of the Roman Catholic Church in Poland is incorporated into state-run cultural policies. The organs of public authority enforce the objectives of Church regardless of Church’s actual ability to influence the society. It should be pointed out that the secularization of religion in Poland is frequently misinterpreted and usually equated with its deprivatization. It is worth mentioning that Catholicism is the dominant religion of the country and the Roman Catholic Church has hold a special position in Poland and play a major role in the country’s social and political life. In practice, however, Polish society appears to be religiously indifferent. This paper proves that the official, state-run cultural policy in Poland is based on favoritism of the Roman Catholic Church, regardless of Church’s actual ability to wield influence on society. Thus, there is a variety of implicit and explicit cultural policies implemented by the authorities to support Church. This work also aims at addressing the question of social attitudes to women, especially the one concerning the UN and EU law embracing women’s rights, until recently still not implemented in Poland. This paper further explores some peculiarities of this topic as an example of a specific outcome of Church cultural policy and its impact on both the past and present-day society.

  20. Application of Thomson scattering at 1.06μm as a diagnostic for spatial profile measurements of electron temperature and density on the TCV tokamak

    International Nuclear Information System (INIS)

    Franke, S.

    1997-04-01

    The variable configuration tokamak, TCV, in operation at CRPP since the end of 1991, is a particularly challenging machine with regard to the experimental system that must provide essential information regarding properties of confined plasmas with strongly shaped, non-circular cross-sections. The importance of the energy confinement issue in a machine designed specifically for the investigation of the effect of plasma shape on confinement and stability is self-evident, as is the necessity for a diagnostic capable of providing the profiles of electron temperature and density required for evaluation of this confinement. For TCV, a comprehensive Thomson Scattering (TS) diagnostic was the natural choice, specifically owing to the resulting spatially localized and time resolved measurement. The details of the system installed on TCV, together with the results obtained from the diagnostic comprise the subject matter of this thesis. A first version of the diagnostic was equipped with only ten observation volumes. In this case, adequate spatial resolution can only be maintained if measurements are limited to plasmas located in the upper half of the highly elongated TCV vacuum vessel. The system has recently been upgraded through the addition of a further fifteen observation volumes, together with major technical improvements in the scattered light detection system. This new version now permits TS observations in all TCV plasma configurations, including equilibria produced in the lower and upper halves of the vacuum vessel and the highly elongated plasmas now routinely created. Whilst a description of the new detection system along with some results obtained using the extended set of observation volumes are included, this thesis reports principally on the hardware details of and the interpretation of data from the original, ten observation volume system. (author) figs., tabs., 75 refs

  1. Poland's Services Trade with the European Union During the Preaccession Period

    OpenAIRE

    Dariusz Mongiało

    2004-01-01

    The fact that, since 1 May 2004, Poland has the status of European Union member involves certain consequences for Poland's competitiveness in the international services trade market. What competitive position will Poland finally occupy among the EU countries in the postaccession period will to a large extent depend on Poland's present position in the services trade with the EU countries. So, the paper tries to present, on the basis of the most recent available statistical data published by th...

  2. Expert views from Poland and Estonia

    Directory of Open Access Journals (Sweden)

    Kaja Põlluste

    2016-12-01

    Full Text Available Background . Home care (HC is placed between the health and social welfare systems, and the clients of HC mostly need health services. Along with other providers, family doctors (FDs are usually involved in the provision of care. Objectives. This paper aims to describe and compare the involvement of HC providers to elderly and disabled persons in Poland and Estonia. Material and methods . This study is part of the international project EURHOMA P (Mapping Professional Home Care in Europe. Data was collected in 2008–2010. Experts from different areas of health and social care were queried by using a questionnaire containing structured case narratives, which were hypothetical descriptions of the situations of elderly or disabled persons living at home and in need of care. Results. There are a number of HC services, e.g. nursing, medical and social, available in both countries. The application for HC is mostly made by the patient or a close family member; the point of entry to HC can differ and depends on the client’s primary problem. FDs, together with social workers, play an important role in the provision of HC services in both countries. However, due to a shortage of round-the-clock professional services at a client’s home, families are also expected to play a large role in providing HC . Conclusions . Health care professionals, mainly those working in primary health care, play a remarkable role in access to and provision of HC services. Nevertheless, responsibility for 24-hour care lies, to a large extent, with the client’s immediate family. This situation seems to be typical in Eastern European countries.

  3. Pedestrian Safety in Road Traffic in Poland

    Science.gov (United States)

    Budzynski, Marcin; Jamroz, Kazimierz; Mackun, Tomasz

    2017-10-01

    Every third road accident in Poland involves a pedestrian as a participant or, most of the time, a casualty. Pedestrian accidents are usually the result of complex situations and the outcome of a number of factors related to driver and pedestrian behaviour and road infrastructure. Safety depends largely on how well the traffic condition is perceived and on visibility in traffic. The paper presents the results of analyses of methodologies for systematic studies of pedestrian behaviour and pedestrian-driver relations. The effects of the location of the site, type of cross-section and other selected parameters on pedestrian and driver behaviour are demonstrated. The analyses showed that pedestrians are most often put at risk by too long pedestrian crossings, vehicles going too fast around pedestrian crossings, lack of proper sight distance and poorly lit or unlit pedestrian crossings. The reason for such defective infrastructure is that planners, designers, contractors and maintenance services are not receiving any support from design, marking and maintenance regulations for pedestrian traffic. In addition, the Road Traffic Law is not restrictive enough when it comes to drivers’ obligations towards pedestrian safety. Polish design regulations allow long pedestrian crossings up to four lanes in one direction or three lanes in two directions irrespective of traffic control and speed limits. Pedestrian crossings should be kept at a maximum of three lanes. There is nothing in the design regulations about the required driver-pedestrian sight distance. Neither does the Road Traffic Law help engineers with that. It is legal to park vehicles within 10 m of a pedestrian crossing which does not guarantee the necessary sight distance. Drivers must be able to see a pedestrian waiting or stepping onto the crossing from a distance that will help them come to a stop safely. It is safer to follow the principle of providing adequate pedestrian sight distance. Recommendations for

  4. Water Quality and Management Changes Over the History of Poland.

    Science.gov (United States)

    Szalinska, Ewa

    2018-01-01

    Poland is one of the countries distinguished by a long and colorful past. Undergoing numerous turbulent socio-economic changes forced by the course of history, Poland is now one of the member states of the European Union. Experiencing low water quantity and high contamination levels in surface waters, Poland is following other EU countries in the effort to reach a "good" water status. Herein are presented impacts of changes in Polish history on water legislation, management, and research, as well as explanations for the perceptible split between engineering and scientific approaches to the aquatic issues. Drawbacks caused by unsatisfactory state research funding for the sciences and division of the water related contemporary scientific interests are also discussed.

  5. Geographical distribution of 90Sr contamination in Poland

    International Nuclear Information System (INIS)

    Gaca, P.; Mietelski, J.W.; Skwarzec, B.

    2006-01-01

    The paper presents results on determination of 90 Sr in bilberry and cowberry leaves (Vaccinium myrtillus and Vaccinium vitis-idaea) and the use of these plants as bio-monitors of radiostrontium contamination in Poland. Radiostrontium was determined by mean of liquid scintillation spectrometry preceded by radiochemical separation using Sr-resin and 85 Sr tracer. The approximate map of 90 Sr contamination of Poland is presented. The activity ratio between 90 Sr and obtained earlier data for 137 Cs in the same samples is discussed. The enhancement of radiostrontium content observed in northeastern Poland seems to be the trace of hot-particles fallout from initial Chernobyl cloud, which passed over Polish territory toward Scandinavia. (orig.)

  6. THE TRADE POSITION OF POLAND IN THE ICT SERVICES SECTOR

    Directory of Open Access Journals (Sweden)

    Sylwia Talar

    2016-09-01

    Full Text Available The paper includes analysis and assessment of trade in the ICT services performance of Poland. This study is looked at the trade position, essentially on the basis of the share in the world ICT services exports, revealed comparative advantage (RCA, and trade coverage ratio. It also identifies trends of the world trade in the ICT services. The statistics are derived from the basis of UNCTAD and Eurostat. International trade in the ICT ser-vices sector has specific characteristics and the interpretation of results of this trade is to take account of the particular nature of the ICT services. Poland is currently not revealed comparative advantage in the ICT services exports, but has had positive balance. Practically all trade indicators for Poland show very strong growth, which indicate a significant improvement in its ICT services trade position.

  7. Extreme Precipitation in Poland in the Years 1951-2010

    Science.gov (United States)

    Malinowska, Miroslawa

    2017-12-01

    The characteristics of extreme precipitation, including the dominant trends, were analysed for eight stations located in different parts of Poland for the period 1951-2010. Five indices enabling the assessment of the intensity and frequency of both extremely dry and wet conditions were applied. The indices included the number of days with precipitation ≥10mm·d-1 (R10), maximum number of consecutive dry days (CDD), maximum 5-day precipitation total (R5d), simple daily intensity index (SDII), and the fraction of annual total precipitation due to events exceeding the 95th percentile calculated for the period 1961-1990. Annual trends were calculated using standard linear regression method, while the fit of the model was assessed with the F-test at the 95% confidence level. The analysed changes in extreme precipitation showed mixed patterns. A significant positive trend in the number of days with precipitation ≥10mm·d-1 (R10) was observed in central Poland, while a significant negative one, in south-eastern Poland. Based on the analysis of maximum 5-day precipitation totals (R5d), statistically significant positive trends in north-western, western and eastern parts of the country were detected, while the negative trends were found in the central and northeastern parts. Daily precipitation, expressed as single daily intensity index (SDII), increased over time in northern and central Poland. In southern Poland, the variation of SDII index showed non-significant negative tendencies. Finally, the fraction of annual total precipitation due to the events exceeding the 1961-1990 95th percentile increased at one station only, namely, in Warsaw. The indicator which refers to dry conditions, i.e. maximum number of consecutive dry days (CDD) displayed negative trends throughout the surveyed area, with the exception of Szczecin that is a representative of north-western Poland.

  8. Reliability of Power Units in Poland and the World

    Directory of Open Access Journals (Sweden)

    Józef Paska

    2015-09-01

    Full Text Available One of a power system’s subsystems is the generation subsystem consisting of power units, the reliability of which to a large extent determines the reliability of the power system and electricity supply to consumers. This paper presents definitions of the basic indices of power unit reliability used in Poland and in the world. They are compared and analysed on the basis of data published by the Energy Market Agency (Poland, NERC (North American Electric Reliability Corporation – USA, and WEC (World Energy Council. Deficiencies and the lack of a unified national system for collecting and processing electric power equipment unavailability data are also indicated.

  9. Challenges of coal conversion for decarbonized energy in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Sciazko, Marek; Jalosinski, Krzysztof; Majchrzak, Henryk; Michalski, Mieczyslaw; Tymowski, Henryk; Witos, Tadeusz; Wroblewska, Elzbieta

    2010-09-15

    Carbon dioxide is considered to be the main challenge for the coal-based power generation as well as for any other industrial application of coal. Poland's energy sector is primarily based on coal combustion that covers almost 90% of demand. Future development of that sector depends on the restriction on value of carbon dioxide emission or trading allowances. There are two main technological approaches to development of new coal based generation capacity, namely: gasification and pre-combustion capture; supercritical combustion and post-combustion capture. The current situation in development of three this type projects in Poland is presented.

  10. ESO Science Outreach Network in Poland during 2011-2013

    Science.gov (United States)

    Czart, Krzysztof

    2014-12-01

    ESON Poland works since 2010. One of the main tasks of the ESO Science Outreach Network (ESON) is translation of various materials at ESO website, as well as contacts with journalists. We support also science festivals, conferences, contests, exhibitions, astronomy camps and workshops and other educational and outreach activities. During 2011-2013 we supported events like ESO Astronomy Camp 2013, ESO Industry Days in Warsaw, Warsaw Science Festival, Torun Festival of Science and Art, international astronomy olympiad held in Poland and many others. Among big tasks there was also translation of over 60 ESOcast movies.

  11. The integration of Poland into the European Union

    OpenAIRE

    FAUCOMPRET, Erik; KONINGS, Jozef

    2001-01-01

    Poland was among the first Eastern European countries to apply for membership of the European Union. In view of Poland’s tragic history and the economic liberalisation that has taken place since 1989, we believe that the EU should adopt a generous approach toward its application. Unfortunately it looks as if the EU wants Poland to conform with all its laws before it can join. Our research suggests that the EU should pursue an open trade, labour and investment policy. Poland’s membership will ...

  12. Viral hepatitis as an occupational disease in Poland.

    Science.gov (United States)

    Bilski, Bartosz

    2011-07-01

    In medical terms, occupational diseases are defined as health disorders specifically associated with the working environment of people and their occupational activity. From the medical and legal perspectives, the vast majority of European countries consider particular diseases to be of occupational origin if they are mentioned in the current list of occupational diseases and caused by exposure to factors in the working environment that are harmful to health. The aim of this study was to analyze the occurrence of cases of viral hepatitis certified as an occupational disease in Poland during 1979-2009. This article presents the medical, economic, and legal aspects of the epidemiology of hepatitis as an occupational disease in Poland. Publically available statistical data on certified occupational diseases in Poland and data contained in individual "occupational disease diagnosis cards" (based on data used in Poland statistical form), regarding certified cases of hepatitis among health care professionals, which were collected by the Department of Occupational Hygiene of the Polish Public Health Service, were analyzed in this study. In Poland, the highest number of cases of hepatitis certified as an occupational disease was observed in 1987. A gradual reduction in the number of cases of hepatitis as an occupational disease has been noted since then. Currently, hepatitis C as an occupational disease is certified more frequently than hepatitis B. In Poland, the number of women with hepatitis certified as an occupational disease is higher than that of men. However, among health care professionals, particularly nurses, this difference is insignificant because women outnumber the men. The existence of such a situation is due to the significant quantitative predominance of women over men among medical personnel, especially among nurses. Immunization of health care professionals against the hepatitis B virus (HBV), introduced in Poland in 1988, was an important factor

  13. Technical and Economic Aspects of Low Emission Reduction in Poland

    Science.gov (United States)

    Dzikuć, M.; Łasiński, K.

    2017-12-01

    The paper presents the problem of excessive air pollution in Poland caused mainly by low emission. The emission arises in result of heating flats by means of old and energetically inefficient heating installations. In Poland and Bulgaria the inhaled air is of the worst quality out of all EU countries. The paper presents economic and technical problems related to low emission occurring during the combustion of solid fuels in local boiler houses. Furthermore, the most significant economic issues, connected with the reduction of low emission are discussed, as well as technological possibilities of efficient reduction of the amount of pollution in the atmosphere. Conclusions are presented at the end of the article.

  14. An overview of occupational voice disorders in Poland

    Directory of Open Access Journals (Sweden)

    Ewa Niebudek-Bogusz

    2013-10-01

    Full Text Available Occupational voice disorders make the most frequently certified category of occupational diseases in Poland, making up approximately 20% of all cases. This study presents the current knowledge of the etiopathogenesis of occupational voice disorders. It stresses the importance of the evaluation of vocal loading by means of objective measurements. Furthermore, this study discusses the medico-legal aspects of the procedure of certifying occupational voice disorders in Poland. The paper also describes the preventive programs addressed particularly to teachers, including multidisciplinary and holistic management of occupational dysphonia. Their role in the improvement of occupational safety and health (OSH arrangement for vocally demanding professions is emphasized.

  15. Absenteeism movement in Greater Poland in 1840–1902

    OpenAIRE

    Izabela Krasińska

    2013-01-01

    The article presents the origins and development of the idea of absenteeism in Greater Poland in the 19th century. The start date for the research is 1840, which is considered to be a breakthrough year in the history of an organized absenteeism movement in Greater Poland. It was due to the Association for the Suppression of the Use of Vodka (Towarzystwo ku Przytłumieniu Używania Wódki) in the Great Duchy of Posen that was then established in Kórnik. It was a secular organization that came int...

  16. Road Infrastructure Safety Management in Poland

    Science.gov (United States)

    Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

    2017-10-01

    The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

  17. Early medieval touchstones from Sowinki, Greater Poland

    Czech Academy of Sciences Publication Activity Database

    Ježek, Martin; Krzyszowski, A.; Zavřel, J.

    2013-01-01

    Roč. 91, 1-2 (2013), s. 177-186 ISSN 0016-8874 Institutional support: RVO:67985912 Keywords : Early Middle Ages * graveyards * touchstones * metals * electron microscopy * social structure Subject RIV: AC - Archeology, Anthropology, Ethnology

  18. Adult Learning Development in Poland in the 20th Century

    Science.gov (United States)

    Boiarska-Khomenko, Anna

    2017-01-01

    The article presents a retrospective analysis of adult learning development in Poland in the 20th century. Based on the study and analysis of historical and pedagogical literature, normative documents of the official bodies of Polish government, the periodical press of the 20th century, several stages of adult learning development, in the…

  19. The State of Development of Digital Libraries in Poland

    Science.gov (United States)

    Gorny, Miroslaw; Catlow, John; Lewandowski, Rafal

    2010-01-01

    Purpose: The purpose of this paper is to describe the state of development of Polish digital libraries. Design/methodology/approach: The paper describes the establishment of the first digital library in Poland, the creation of the Wielkopolska Digital Library and other regional digital libraries. The organisational and technological solutions used…

  20. An updated distribution of Solidago × niederederi (Asteraceae in Poland

    Directory of Open Access Journals (Sweden)

    Pliszko Artur

    2017-12-01

    Full Text Available In this paper, an updated map of the distribution of Solidago ×niederederi, a natural hybrid between S. canadensis and S. virgaurea, in Poland is presented using the ATPOL cartogram method. A compiled list of 55 localities of the hybrid within 40 cartogram units (10-km squares is provided and its negative impact on S. virgaurea is highlighted.