The Development of light-weight 2-link robot arm for high radiation area

Energy Technology Data Exchange (ETDEWEB)

Shin, Ho Cheol; Seo, Yong Chil; Jung, Kyung Min; Choi, Young Soo

2009-10-15

A light-weight 2-link robot arm which weight is less than 8kg was developed for treating the small radio-active material in the high radiation area such as nuclear power plants and NDT area. The light-weight 2-link robot arm can be attached on a small mobile robot and carry out tasks. It is a 5 DOF robot arm including a gripper

Relationship between weight-related behavioral profiles and health outcomes by sexual orientation and gender.

Science.gov (United States)

VanKim, Nicole A; Erickson, Darin J; Eisenberg, Marla E; Lust, Katherine; Rosser, B R Simon; Laska, Melissa N

2016-07-01

Examine relationships between weight-related factors and weight status, body dissatisfaction, chronic health conditions, and quality of life across sexual orientation and gender. Two- and four-year college students participated in the College Student Health Survey (n = 28,703; 2009-2013). Risk differences were calculated to estimate relationships between behavioral profiles and weight status, body satisfaction, diagnosis of a chronic condition, and quality of life, stratified by gender and sexual orientation. Four behavioral profiles, characterized as "healthier eating habits, more physically active," "healthier eating habits," "moderate eating habits," and "unhealthy weight control," were utilized based on latent class analyses, estimated from nine weight-related behavioral survey items. Sexual orientation differences in weight and quality of life were identified. For example, sexual minority groups reported significantly poorer quality of life than their heterosexual counterparts (females: 22.5%-38.6% (sexual minority) vs. 19.8% (heterosexual); males: 14.3%-26.7% (sexual minority) vs. 11.8% (heterosexual)). Compared with the "healthier eating habits, more physically active" profile, the "unhealthy weight control" profile was associated with obesity, poor body satisfaction, and poor quality of life in multiple gender/sexual orientation subgroups. Interventions are needed to address obesity, body dissatisfaction, and poor quality of life among sexual minority college students. © 2016 The Obesity Society.

Study of photophysical processes in organic light-emitting diodes based on light-emission profile reconstruction

NARCIS (Netherlands)

Carvelli, M.

2012-01-01

Organic light-emitting diodes (OLEDs) are emerging as a promising option for energy-efficient, flexible light sources. A key factor that needs to be measured and controlled is the shape of the emission profile, i.e. the spatial distribution of the emitting excitons across the active layer thickness.

Thermal properties of light-weight concrete with waste polypropylene aggregate

Science.gov (United States)

Záleská, Martina; Pokorný, Jaroslav; Pavlíková, Milena; Pavlík, Zbyšek

2017-07-01

Thermal properties of a sustainable light-weight concrete incorporating high volume of waste polypropylene as partial substitution of natural aggregate were studied in the paper. Glass fiber reinforced polypropylene (GFPP), a by-product of PP tubes production, partially substituted fine natural silica aggregate in 10, 20, 30, 40, and 50 mass%. In order to quantify the effect of GFPP use on concrete properties, a reference concrete mix without plastic waste was studied as well. For the applied GFPP, bulk density, matrix density, and particle size distribution were measured. Specific attention was paid to thermal transport and storage properties of GFPP that were examined in dependence on compaction time. For the developed light-weight concrete, thermal properties were accessed using transient impulse technique, whereas the measurement was done in dependence on moisture content, from the dry state to fully water saturated state. Additionally, the investigated thermal properties were plotted as function of porosity. The tested light-weight concrete was found to be prospective construction material possessing improved thermal insulation function. Moreover, the reuse of waste plastics in concrete composition was beneficial both from the environmental and financial point of view considering plastics low biodegradability and safe disposal.

data sets Simulations in articulating light-weight PRS

NARCIS (Netherlands)

Van den Berg, Bert

2008-01-01

The data sets are output of 3 different steps in the development a simulations of a PRS as described in chapter 3.3: Simulations in articulating light-weight PRS A case for Pedagogy-oriented and Rating-based Hybrid Recommendation Strategies Rob Nadolski, Bert van den Berg, Adriana Berlanga, Hans

The Effect of Ramadan Fasting and Weight-Lifting Training on Plasma Volume, Glucose and Lipids Profile of Male Weight-Lifters

Directory of Open Access Journals (Sweden)

Seyed Morteza Tayebi

Full Text Available Objective(sThe purpose of the present study was to evaluate the effect of Ramadan fasting and weight-lifting training on plasma volume, glucose, and lipids profile of male weight-lifter.Materials and MethodsForty male weight-lifters were recruited and divided into 4 groups (n=10 each and as the following groups: control (C, fasting (F, training (T and fasting-training (F-T. The T and F-T groups performed weight-lifting technique trainings and hypertrophy body building (3 sessions/week, 90 min/session. All subjects were asked to complete a medical examination as well as a medical questionnaire to ensure that they were not taking any medication, were free of cardiac, respiratory, renal, and metabolic diseases, and were not using steroids. Blood samples were taken at 24 hr before and 24 hr after one month of fasting and weight-lifting exercise. The plasma volume, fasting blood sugar (FBS, lipid profiles, and lipoproteins were analyzed in blood samples. ResultsBody weight and plasma volume showed significant (P< 0.05 decrease and increase in the F group (P< 0.05 respectively. Also, a significant reduction was observed in F-T group body weight (P< 0.01. A significant increase was found in FBS level of F group (P< 0.05. The lipid profiles and lipoproteins didn’t change significantly in C, F, T and the F-T groups.ConclusionThe effect of Ramadan fasting on body weight and plasma volumes may be closely related to the nutritional diet or biochemical response to fasting.

Light-weight analyzer for odor recognition

Energy Technology Data Exchange (ETDEWEB)

Vass, Arpad A; Wise, Marcus B

2014-05-20

The invention provides a light weight analyzer, e.g., detector, capable of locating clandestine graves. The detector utilizes the very specific and unique chemicals identified in the database of human decompositional odor. This detector, based on specific chemical compounds found relevant to human decomposition, is the next step forward in clandestine grave detection and will take the guess-work out of current methods using canines and ground-penetrating radar, which have historically been unreliable. The detector is self contained, portable and built for field use. Both visual and auditory cues are provided to the operator.

Transcriptome Profiling of the Abdominal Skin of Larimichthys crocea in Light Stress

Science.gov (United States)

Han, Zhaofang; Lv, Changhuan; Xiao, Shijun; Ye, Kun; Zhang, Dongling; Tsai, Huai Jen; Wang, Zhiyong

2018-04-01

Large yellow croaker ( Larimichthys crocea), one of the most important marine fish species in China, can change its abdominal skin color when it is shifted from light to dark or from dark to light, providing us an opportunity of investigating the molecular responding mechanism of teleost in light stress. The gene expression profile of fish under light stress is rarely documented. In this research, the transcriptome profiles of the abdominal skin of L. crocea exposed to light or dark for 0 h, 0.5 h and 2 h were produced by next-generation sequencing (NGS). The cluster results demonstrated that stress period, rather than light intensity ( e.g., light or dark), is the major influencing factor. Differently expressed genes (DEGs) were identified between 0 h and 0.5 h groups, between 0 h and 2 h groups, between 0.5 h light and 0.5 h dark, and between 2 h light and 2 h dark, respectively. The gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) annotation revealed that the genes relating to immunity, energy metabolism, and cytoskeletal protein binding were significantly enriched. The detailed analysis of transcriptome profiles also revealed regular gene expression trends, indicating that the elaborate gene regulation networks underlined the molecular responses of the fish to light stress. This transcriptome analysis suggested that systematic and complicated regulatory cascades were functionally activated in response to external stress, and coloration change caused by light stress was mainly attributed to the change in the density of chromatophores for L. crocea. This study also provided valuable information for skin coloration or light stress research on other marine fish species.

Real-Time 3D Profile Measurement Using Structured Light

International Nuclear Information System (INIS)

Xu, L; Zhang, Z J; Ma, H; Yu, Y J

2006-01-01

The paper builds a real-time system of 3D profile measurement using structured-light imaging. It allows a hand-held object to rotate free in the space-time coded light field, which is projected by the projector. The surface of measured objects with projected coded light is imaged; the system shows surface reconstruction results of objects online. This feedback helps user to adjust object's pose in the light field according to the dismissed or error data, which would achieve the integrality of data used in reconstruction. This method can acquire denser data cloud and have higher reconstruction accuracy and efficiency. According to the real-time requirements, the paper presents the non-restricted light plane modelling which suits stripe structured light system, designs the three-frame stripes space-time coded pattern, and uses the advance ICP algorithms to acquire 3D data alignment from multiple view

A low cost, light weight cenosphere–aluminium composite for brake ...

Indian Academy of Sciences (India)

. Home; Journals; Bulletin of Materials Science; Volume 39; Issue 1. A low cost, light weight cenosphere–aluminium composite for brake disc application. V Saravanan P R Thyla S R Balakrishnan. Volume 39 Issue 1 February 2016 pp 299-305 ...

Detailed T1-Weighted Profiles from the Human Cortex Measured in Vivo at 3 Tesla MRI.

Science.gov (United States)

Ferguson, Bart; Petridou, Natalia; Fracasso, Alessio; van den Heuvel, Martijn P; Brouwer, Rachel M; Hulshoff Pol, Hilleke E; Kahn, René S; Mandl, René C W

2018-04-01

Studies into cortical thickness in psychiatric diseases based on T1-weighted MRI frequently report on aberrations in the cerebral cortex. Due to limitations in image resolution for studies conducted at conventional MRI field strengths (e.g. 3 Tesla (T)) this information cannot be used to establish which of the cortical layers may be implicated. Here we propose a new analysis method that computes one high-resolution average cortical profile per brain region extracting myeloarchitectural information from T1-weighted MRI scans that are routinely acquired at a conventional field strength. To assess this new method, we acquired standard T1-weighted scans at 3 T and compared them with state-of-the-art ultra-high resolution T1-weighted scans optimised for intracortical myelin contrast acquired at 7 T. Average cortical profiles were computed for seven different brain regions. Besides a qualitative comparison between the 3 T scans, 7 T scans, and results from literature, we tested if the results from dynamic time warping-based clustering are similar for the cortical profiles computed from 7 T and 3 T data. In addition, we quantitatively compared cortical profiles computed for V1, V2 and V7 for both 7 T and 3 T data using a priori information on their relative myelin concentration. Although qualitative comparisons show that at an individual level average profiles computed for 7 T have more pronounced features than 3 T profiles the results from the quantitative analyses suggest that average cortical profiles computed from T1-weighted scans acquired at 3 T indeed contain myeloarchitectural information similar to profiles computed from the scans acquired at 7 T. The proposed method therefore provides a step forward to study cortical myeloarchitecture in vivo at conventional magnetic field strength both in health and disease.

Light-weight extension tubes for compressed-air garden sprayers

Science.gov (United States)

Thomas W. McConkey; Charles E. Swett

1967-01-01

To hand-spray taller trees safely and efficiently, 8-, 12-, and 16-foot extension tubes for compressed-air garden sprayers were designed and built. These light-weight tubes have been used successfully for spraying white pine leaders for weevil control on the Massabesic Experimental Forest in Maine. Bill of materials and assembly instructions are included.

Light-weight Mutual Authentication with Non-repudiation

Directory of Open Access Journals (Sweden)

V. Clupek

2018-04-01

Full Text Available In this paper, we focused on a problem of authentication on low-cost devices. We have proposed a new light-weight protocol for mutual authentication of communication entities with non-repudiation of realized events. The protocol is simple and suitable for implementation on low-cost devices. Non-repudiation of realized events is achieved by involving a Trusted Third Party (TTP to the communication. The proposed protocol uses only an appropriate lightweight hash function and pre-shared secret data. Security of the proposed protocol was verified by the BAN (Burrows-Abadi-Needham logic.

Proatherogenic Lipid Profile in Early Childhood: Association with Weight Status at 4 Years and Parental Obesity.

Science.gov (United States)

Riaño-Galán, Isolina; Fernández-Somoano, Ana; Rodríguez-Dehli, Cristina; Valvi, Damaskini; Vrijheid, Martine; Tardón, Adonina

2017-08-01

To determine lipid profiles in early childhood and evaluate their association with weight status at 4 years of age. Additionally, we evaluated whether the risk of overweight or having an altered lipid profile was associated with parental weight status. Five hundred eighty two mothers and their 4-year-old children from 2 Spanish population-based cohorts were studied. Weight status in children at 4 years of age was classified as overweight or obese using the International Obesity Task Force criteria. Plasma total cholesterol, triglycerides, high-density lipoprotein cholesterol, and low-density lipoprotein cholesterol were determined in children and lipid ratios were calculated. A proatherogenic lipid profile was defined as having the 3 lipid ratios in the third tertile. A total of 12.9% of children were overweight and 6.4% were obese. Weight status at 4 years of age was related to maternal prepregnancy body mass index, paternal body mass index, gestational diabetes, and birth weight, but not with other sociodemographic characteristics of the mother. We found no association with gestational age, sex of the child, or breastfeeding. The risk of overweight/obesity was increased 4.17-fold if mothers were overweight/obese (95% CI 1.76-9.88) and 5.1-fold (95% CI 2.50-10.40) if both parents were overweight/obese. There were 133 children (22.8%) with a proatherogenic lipid profile. The risk of a proatherogenic lipid profile was increased 2.44-fold (95% CI 1.54-3.86) if they were overweight/obese at 4 years of age and 2-fold if the father was overweight/obese (95% CI 1.22-3.35). Four-year-old overweight/obese children have higher lipid risk profiles. Offspring of overweight/obese parents have an increased risk for obesity and a proatherogenic lipid profile. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Moderate Versus Light Pressure Massage Therapy Leads to Greater Weight Gain in Preterm Infants

Science.gov (United States)

Field, Tiffany; Diego, Miguel A.; Hernandez-Reif, Maria; Deeds, Osvelia; Figuereido, Barbara

2007-01-01

Sixty-eight preterm infants (M GA=3Owks.) were randomly assigned to a moderate or to a light pressure massage therapy group to receive 15 massages 3 times per day for 5 days. Behavior state, stress behaviors and heart rate were recorded for 15 minutes before and during the first 15-minute therapy session. Weight gain was recorded over the 5 day therapy period. The moderate versus light pressure massage group gained significantly more weight per day. During the behavior observations the moderate versus light pressure massage group showed significantly lower increases from the pre-session to the session recording on: 1) active sleep; 2) fussing; 3) crying; 4) movement; and 5) stress behavior (hiccupping). They also showed a smaller decrease in deep sleep, a greater decrease in heart rate and a greater increase in vagal tone. Thus, the moderate pressure massage therapy group appeared to be more relaxed and less aroused than the light pressure massage group which may have contributed to the greater weight gain of the moderate pressure massage therapy group. PMID:17138310

Melatonin and cortisol profiles in the absence of light perception

DEFF Research Database (Denmark)

Aubin, S.; Kupers, R.; Ptito, M.

2017-01-01

As light plays an important role in the synchronisation of the internal biological clock to the environmental day/night schedule, we compared the 24-h profiles of biological circadian markers in blind and normal sighted individuals. Salivary melatonin and cortisol concentrations were collected...... every two hours in eleven blind subjects, reporting no conscious light perception, and eleven age- and sex-matched normal sighted controls. Timing of melatonin onset and associated cortisol quiescence period confirm an increased incidence of abnormal circadian patterns in blindness. Additionally, blind...... subjects showed a greater overall melatonin concentration throughout the 24-h period. Cortisol profiles, including concentration and morning cortisol peaks, on the other hand, did not differ between blind and sighted individuals. These findings support previous reports of an increase in abnormal circadian...

Comprehensive Evaluation of Car-Body Light-Weighting Scheme Based on LCC Theory

Directory of Open Access Journals (Sweden)

Han Qing-lan

2016-01-01

Full Text Available In this paper, a comprehensive evaluation model of light-weighting scheme is established, which is based on three dimensions, including the life cycle costs of the resource consumed by the designed objects (LCC, willingness to pay for the environmental effect of resource consumption (WTP and performance (P. Firstly, cost of each stage is determined. Then, based on the resource classification, which is based on cost elements, determine the material list needed, and apply WTP weight coefficient to monetize life cycle environmental impact and obtain the life cycle comprehensive cost of designed scheme (TCC. In the next step Performance (P index is calculated to measure the value of the life cycle costs by applying AHP and SAW method, integrated (TCC and (P to achieve comprehensive evaluation of light-weighting scheme. Finally, the effectiveness of the evaluation model is verified by the example of car engine hood.

A light-weight hyperspectral mapping system for unmanned aerial vehicles - The first results

NARCIS (Netherlands)

Suomalainen, Juha; Anders, Niels; Iqbal, Shahzad; Franke, Jappe; Wenting, Philip; Bartholomeus, Harm; Becker, Rolf; Kooistra, Lammert

2017-01-01

Research opportunities using UAV remote sensing techniques are limited by the payload of the platform. Therefore small UAV's are typically not suitable for hyperspectral imaging due to the weight of the mapping system. In this research, we are developing a light-weight hyperspectral mapping system

Impact of intermittent fasting on the lipid profile: Assessment associated with diet and weight loss.

Science.gov (United States)

Santos, Heitor O; Macedo, Rodrigo C O

2018-04-01

Intermittent fasting, whose proposed benefits include the improvement of lipid profile and the body weight loss, has gained considerable scientific and popular repercussion. This review aimed to consolidate studies that analyzed the lipid profile in humans before and after intermittent fasting period through a detailed review; and to propose the physiological mechanism, considering the diet and the body weight loss. Normocaloric and hypocaloric intermittent fasting may be a dietary method to aid in the improvement of the lipid profile in healthy, obese and dyslipidemic men and women by reducing total cholesterol, LDL, triglycerides and increasing HDL levels. However, the majority of studies that analyze the intermittent fasting impacts on the lipid profile and body weight loss are observational based on Ramadan fasting, which lacks large sample and detailed information about diet. Randomized clinical trials with a larger sample size are needed to evaluate the IF effects mainly in patients with dyslipidemia. Copyright © 2018 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Integrated Design Optimization of a 5-DOF Assistive Light-weight Anthropomorphic Arm

DEFF Research Database (Denmark)

Zhou, Lelai; Bai, Shaoping; Hansen, Michael Rygaard

2011-01-01

An integrated dimensional and drive train optimization method was developed for light-weight robotic arm design. The method deals with the determination of optimal link lengths and the optimal selection of motors and gearboxes from commercially available components. Constraints are formulated...... on the basis of kinematic performance and dynamic requirements, whereas the main objective is to minimize the weight. The design of a human-like arm, which is 10 kg in weight with a load capacity of 5 kg, is described....

Ultra light weight jet engine JR100; Chokeiryo jet engine JR100

Energy Technology Data Exchange (ETDEWEB)

Matsuki, M. [Nippon Institute of Technology, Saitama (Japan)

1999-03-20

As a part of the jet lift V/STOL research by National Aerospace Laboratory, a study of trial manufacture of ultra light weight jet engine JR 100 started in FY 1964. The study was aimed at obtaining a lift engine for VTOL and founding the base for the future jet lift VTOL, and at taking in the results of the jet engine element study accumulated so far and manufacturing an advanced engine. Decided on the use of domestic materials for JR 100, the materials to be used are almost iron-based ones. Through the efforts for weight reduction in structure and processing, a thrust/weight ratio of 10 was realized. At the same time, the production/processing of light weight materials such as titanium alloys was proceeded with, and by adopting the materials to JR 200 system, a thrust/weight ratio of 15 was realized. Together with these, for the purpose of reducing the fuel consumption rate, studies started on fan for lift fan engine and high temperature turbine (an inlet temperature of 1250 degrees C was achieved), to get low noise/high efficiency fan. By the research results, the basis for jet lift VTOL was established, and it became the basis for the development of turbo fan engine FJR 710. (NEDO)

Two-photon equivalent weighting of spatial excimer laser beam profiles

Science.gov (United States)

Eva, Eric; Bauer, Harry H.; Metzger, K.; Pfeiffer, A.

2001-04-01

Damage in optical materials for semiconductor lithography applications caused by exposure to 248 or 193 nm light is usually two-photon driven, hence it is a nonlinear function of incident intensity. Materials should be tested with flat- topped temporal and spatial laser beam profiles to facilitate interpretation of data, but in reality this is hard to achieve. Sandstrom provided a formula that approximates any given temporal pulse shape with a two- photon equivalent rectangular pulse (Second Symposium on 193 nm Lithography, Colorado Springs 1997). Known as the integral-square pulse duration, this definition has been embraced as an industry standard. Originally faced with the problem of comparing results obtained with pseudo-Gaussian spatial profiles to literature data, we found that a general solution for arbitrarily inhomogeneous spatial beam profiles exists which results in a definition much similar to Sandstrom's. In addition, we proved the validity of our approach in experiments with intentionally altered beam profiles.

Light-weight spherical mirrors for Cherenkov detectors

CERN Document Server

Cisbani, E; Colilli, S; Crateri, R; Cusanno, F; De Leo, R; Fratoni, R; Frullani, S; Garibaldi, F; Giuliani, F; Gricia, M; Iodice, M; Iommi, R; Lagamba, L; Lucentini, M; Mostarda, A; Nappi, E; Pierangeli, L; Santavenere, F; Urciuoli, G M; Vernin, P

2003-01-01

Light-weight spherical mirrors have been appositely designed and built for the gas threshold Cherenkov detectors of the two Hall A spectrometers. The mirrors are made of a 1 mm thick aluminized plexiglass sheet, reinforced by a rigid backing consisting of a phenolic honeycomb sandwiched between two carbon fiber mats epoxy glued. The produced mirrors have a thickness equivalent to 0.55% of radiation length, and an optical slope error of about 5.5 mrad. These characteristics make these mirrors suitable for the implementation in Cherenkov threshold detectors. Ways to improve the mirror features are also discussed in view of their possible employment in RICH detectors.

Method of preparing light-weight plugging mud

Energy Technology Data Exchange (ETDEWEB)

Gorskiy, V F; Melnichuk, A N; Vernikovskiy, A N

1982-01-01

A method is proposed for preparing a light-weight plugging mud which includes mixing Portland cement on an aqueous suspension of palygorskite. It is distinguished by the fact that in order to improve the quality of the mud and strength of the cement stone with simultaneous decrease in the gas permeability, before mixing the Portland cement, the aqueous suspension of palygorskite is dispersed to stabilization of viscosity, and after mixing the Portland cement, the obtained cement-clay mixture is exposed to additional dispersion under pressure. The ratio of the ingredients is the following (% by mass): Portland cement 32.0-61.0; palygorskite 1.2-2.9; water--the rest.

INFLUENCE OF LASER BEAM PROFILE ON LIGHT SCATTERING BY HUMAN SKIN DURING PHOTOMETRY BY ELLIPSOIDAL REFLECTORS

Directory of Open Access Journals (Sweden)

M. A. Bezuglyi

2018-01-01

Full Text Available The correct accounting of laser emitter parameters for improvement of diagnostic authenticity of methods of optical biomedical diagnostic is important problem for applied biophotonic tasks. The purpose of the current research is estimation of influence of energy distribution profile in transversal section of laser beam on light scattering by human skin layers at photometry by ellipsoidal reflectors.Biomedical photometer with ellipsoidal reflectors for investigation of biological tissue specimens in transmitted and reflected light uses laser probing radiation with infinitely thin, Gauss-type and uniform cross-section profile. Distribution of beams with denoted profiles, which consist of 20 million photons with wavelength 632.8 nm, was modeled by using of Monte-Carlo simulation in human skin layers (corneous layer, epidermis, derma and adipose tissue of various anatomic thickness and with ellipsoidal reflectors with focal parameter equal to 16.875 mm and eccentricity of 0.66.The modeling results represent that illuminance distribution in zones of photometric imaging is significantly influenced by the laser beam cross-section profile for various thickness of corneous layer and epidermis in transmitted and reflected light, and also derma in reflected light. Illuminance distribution for adipose tissue in reflected and transmitted light, and also derma in transmitted light, practically do not depend of laser beam profile for anatomic thicknesses, which are appropriate for human skin on various sections of body.There are represented results of modified Monte-Carlo simulation method for biomedical photometer with ellipsoidal reflectors during biometry of human skin layers. For highly scattered corneous layer and epidermis the illumination of middle and external rings of photometric images changes depending from the laser beam profile for more than 50 % in transmitted and 30 % in reflected light. For weakly scattering skin layers (derma and adipose layer

Relationship between weight-related behavioral profiles and health outcomes by sexual orientation and gender

OpenAIRE

VanKim, Nicole A.; Erickson, Darin J.; Eisenberg, Marla E.; Lust, Katherine; Rosser, B. R. Simon; Laska, Melissa N.

2016-01-01

Objective Examine relationships between weight-related factors and weight status, body dissatisfaction, chronic health conditions, and quality of life across sexual orientation and gender. Methods Two- and four-year college students participated in the College Student Health Survey (n=28,703; 2009-2013). Risk differences were calculated to estimate relationships between behavioral profiles and weight status, body satisfaction, diagnosis of a chronic condition, and quality of life, stratified ...

Light-weight reference-based compression of FASTQ data.

Science.gov (United States)

Zhang, Yongpeng; Li, Linsen; Yang, Yanli; Yang, Xiao; He, Shan; Zhu, Zexuan

2015-06-09

The exponential growth of next generation sequencing (NGS) data has posed big challenges to data storage, management and archive. Data compression is one of the effective solutions, where reference-based compression strategies can typically achieve superior compression ratios compared to the ones not relying on any reference. This paper presents a lossless light-weight reference-based compression algorithm namely LW-FQZip to compress FASTQ data. The three components of any given input, i.e., metadata, short reads and quality score strings, are first parsed into three data streams in which the redundancy information are identified and eliminated independently. Particularly, well-designed incremental and run-length-limited encoding schemes are utilized to compress the metadata and quality score streams, respectively. To handle the short reads, LW-FQZip uses a novel light-weight mapping model to fast map them against external reference sequence(s) and produce concise alignment results for storage. The three processed data streams are then packed together with some general purpose compression algorithms like LZMA. LW-FQZip was evaluated on eight real-world NGS data sets and achieved compression ratios in the range of 0.111-0.201. This is comparable or superior to other state-of-the-art lossless NGS data compression algorithms. LW-FQZip is a program that enables efficient lossless FASTQ data compression. It contributes to the state of art applications for NGS data storage and transmission. LW-FQZip is freely available online at: http://csse.szu.edu.cn/staff/zhuzx/LWFQZip.

General and smoking cessation weight concern in a Hispanic sample of light and intermittent smokers.

Science.gov (United States)

Landrau-Cribbs, Erica; Cabriales, José Alonso; Cooper, Theodore V

2015-02-01

This study assessed general and cessation related weight concerns in a Hispanic sample of light (≤10 cigarettes per day) and intermittent (non-daily smoking) smokers (LITS) participating in a brief smoking cessation intervention. Three hundred and fifty-four Hispanic LITS (Mage=34.2, SD=14; 51.1% male; 57.9% Mexican American; 59.0% daily light, 41.0% intermittent) completed baseline measures assessing demographics, tobacco use/history, stage of change (SOC), general weight concern, and cessation related weight concern. Three multiple logistic regression models examined potential predictors (i.e., age, gender, SOC, cigarettes per month, smoking status [daily vs non-daily], weight, cessation related weight concern, general weight concern) of general weight concern, cessation related weight concern, and past 30day abstinence (controlling for the intervention). Study results indicated that a majority of participants reported general weight concern (59.6%), and slightly more than a third (35.6%) reported post cessation weight gain concern (mean and median weight tolerated before relapse were within the 10-12lb range). Lower weight and endorsing general weight concern were associated with cessation related weight concern. Female gender, higher weight, and endorsing cessation related weight concern were associated with general weight concern. Monthly cigarette use was associated with smoking cessation at the three-month follow-up. The results indicate a substantial prevalence of general weight concern and non-trivial rates of cessation related weight concern in Hispanic LITS attempting to quit, and greater success in quitting among those who reported lower rates of cigarettes smoked per month. Copyright © 2014 Elsevier Ltd. All rights reserved.

Diurnal glycemic profile in obese and normal weight nondiabetic pregnant women.

Science.gov (United States)

Yogev, Yariv; Ben-Haroush, Avi; Chen, Rony; Rosenn, Barak; Hod, Moshe; Langer, Oded

2004-09-01

A paucity of data exists concerning the normal glycemic profile in nondiabetic pregnancies. Using a novel approach that provides continuous measurement of blood glucose, we sought to evaluate the ambulatory daily glycemic profile in the second half of pregnancy in nondiabetic women. Fifty-seven obese and normal weight nondiabetic subjects were evaluated for 72 consecutive hours with continuous glucose monitoring by measurement interstitial glucose levels in subcutaneous tissue every 5 minutes. Subjects were instructed not to modify their lifestyle or to follow any dietary restriction. For each woman, mean and fasting blood glucose values were determined; for each meal during the study period, the first 180 minutes were analyzed. For the study group, the fasting blood glucose level was 75 +/- 12 mg/dL; the mean blood glucose level was 83.7 +/- 18 mg/dL; the postprandial peak glucose value level was 110 +/- 16 mg/dL, and the time interval that was needed to reach peak postprandial glucose level was 70 +/- 13 minutes. A similar postprandial glycemic profile was obtained for breakfast, lunch, and dinner. Obese women were characterized by a significantly higher postprandial glucose peak value, increased 1- and 2-hour postprandial glucose levels, increased time interval for glucose peak, and significantly lower mean blood glucose during the night. No difference was found in fasting and mean blood glucose between obese and nonobese subjects. Glycemic profile characterization in both obese and normal weight nondiabetic subjects provide a measure for the desired level of glycemic control in pregnancy that is complicated with diabetes mellitus.

Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers.

Science.gov (United States)

Frenzel, Tobias; Findeisen, Claudio; Kadic, Muamer; Gumbsch, Peter; Wegener, Martin

2016-07-01

Structures and materials absorbing mechanical (shock) energy commonly exploit either viscoelasticity or destructive modifications. Based on a class of uniaxial light-weight geometrically nonlinear mechanical microlattices and using buckling of inner elements, either a sequence of snap-ins followed by irreversible hysteretic - yet repeatable - self-recovery or multistability is achieved, enabling programmable behavior. Proof-of-principle experiments on three-dimensional polymer microstructures are presented. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Wind induced fatigue of slender light weight structures in structural dynamics

NARCIS (Netherlands)

Staalduinen, P.C. van; Courage, W.M.G.

1996-01-01

The paper presents a simplified analytical method for calculating the stress ranges in light weight slender structures due to wind loading. The background and assumptions of the method have been explained as well as the derivation of the relevant formula. The application of the simplified method on

The use of light weight deflectometer for in situ evaluation of sand degree of compaction

Directory of Open Access Journals (Sweden)

Amr F. Elhakim

2014-12-01

Full Text Available The light weight deflectometer (LWD, also known as the light falling weight deflectometer, light drop weight tester, and dynamic plate load test, is a hand portable device that was developed in Germany to measure the soil in situ LWD dynamic modulus. Typically, this modulus is used to evaluate the subsoil degree of compaction. Thus it is suitable for compaction quality control of soil-surfaced roads, embankments and replacement fill. As a dynamic test, the device is suited, in particular, for coarse and mixed grained soils with a maximum grain size of 63 mm. The response of poorly graded calcareous and siliceous sands is the focus of this research. First, the index soil properties of the tested soils including grain size distribution; maximum and minimum void ratios and specific gravity were obtained. Petrographic analyses of the tested sands were also performed to determine their mineralogical composition. A 1-m3 chamber was built for performing the LWD testing in the laboratory. The study was performed for relative densities of 20%, 40%, 60% and 80% to represent the behavior of very loose, loose, medium dense and dense sands. The effect of the existence of a rigid boundary beneath the tested soil on test results was also investigated to determine the zone of influence of the light weight deflectometer.

ADME-Tox profiling of some low molecular weight water soluble chitosan derivatives

Directory of Open Access Journals (Sweden)

Adriana Isvoran

2017-09-01

Full Text Available Within this study we use a few computational tools for predicting absorption, distribution, metabolism, excretion and toxicity (ADME-Tox, pharmacokinetics profiles, toxic/adverse effects, carcinogenicity, cardiotoxicity and endocrine disruption of some of low molecular weight water soluble derivatives of chitosan that are used in wound healing. Investigated compounds do not possess drug-like properties, their pharmacokinetics profiles reveal poor gastrointestinal absorption and low skin penetration. Chitosan derivatives cannot pass the blood-brain barrier and they are not able to inhibit the enzymes of the cytochrome P450 that are involved in the metabolism of xenobiotics. They do not reflect carcinogenicity and cardiotoxicity and reveal only a low probability to be endocrine disruptors. The main side effects in humans of the investigated compounds are: weight loss, acidosis, gastrointestinal toxicity, respiratory failure. This information is especially important for professional exposure and accidental contamination with these compounds.

Light weight hollow maxillary complete denture: A case series

Directory of Open Access Journals (Sweden)

Laxman Singh Kaira

2012-01-01

Full Text Available Retention, stability and support are the basic principles on which the success of a complete denture relies on. The skill lies in applying these principles efficiently in critical situations. Residual ridge resorption occurs at a three times faster rate in mandibular arch than in the maxillary arch. The severely resorbed maxillary and mandibular edentulous arches that are narrow and constricted with increased interarch space provide decreased support, retention and stability. The consequent weight of the processed complete denture only compromises them further. The severely resorbed jaw can have various treatment options. Extreme resorption of the maxillary denture-bearing area may lead to problems with prosthetic rehabilitation. The advantage of a hollow maxillary or mandibular denture is the reduction of excessive weight of acrylic resin, which normally replaces lost alveolar ridge in the interridge space of the denture wearer. This clinical report describes two case reports of edentulous patients with resorbed ridges where a simplified technique of fabricating a light weight hollow maxillary complete denture was used for the preservation of denture bearing areas.

Strength characteristics of light weight concrete blocks using mineral admixtures

Science.gov (United States)

Bhuvaneshwari, P.; Priyadharshini, U.; Gurucharan, S.; Mithunram, B.

2017-07-01

This paper presents an experimental study to investigate the characteristics of light weight concrete blocks. Cement was partially replaced with mineral admixtures like Fly ash (FA), limestone powder waste (LPW), Rice husk ash (RHA), sugarcane fiber waste (SCW) and Chrysopogonzizanioides (CZ). The maximum replacement level achieved was 25% by weight of cement and sand. Total of 56 cubes (150 mm x 150 mm x150 mm) and 18 cylinders (100mmφ and 50mm depth) were cast. The specimens being (FA, RHA, SCW, LPW, CZ, (FA-RHA), (FA-LPW), (FA-CZ), (LPW-CZ), (FA-SCW), (RHA-SCW)).Among the different combination, FA,FA-SCW,CZ,FA-CZ showed enhanced strength and durability, apart from achieving less density.

Design and fabrication of light weight current collectors for direct methanol fuel cells using the micro-electro mechanical system technique

Science.gov (United States)

Sung, Min-Feng; Kuan, Yean-Der; Chen, Bing-Xian; Lee, Shi-Min

The direct methanol fuel cell (DMFC) is suitable for portable applications. Therefore, a light weight and small size is desirable. The main objective of this paper is to design and fabricate a light weight current collector for DMFC usage. The light weight current collector mainly consists of a substrate with two thin film metal layers. The substrate of the current collector is an FR4 epoxy plate. The thin film metal layers are accomplished by the thermo coater technique to coat metal powders onto the substrate surfaces. The developed light weight current collectors are further assembled to a single cell DMFC test fixture to measure the cell performance. The results show that the proposed current collectors could even be applied to DMFCs because they are light, thin and low cost and have potential for mass production.

Evaluation of the light weight Juggling system

Directory of Open Access Journals (Sweden)

Erev-Yehene Vered

2011-12-01

Full Text Available This paper presents the training of juggling skills, a highly complex problem of coordination, under tight time and space constraints. This training is achieved with a simple training platform, a light weight juggling platform (LWJ, and is compared to training with real balls. The principle directing the design of the platform is to obtain a simple tool. The simplification, in comparison to real world juggling, is based on the identification of invariant properties in the spatiotemporal coordination of intermediate and expert jugglers. Two classes training solutions were added to the LWJ: An audio-tactile pacing or augmented multimodal environment, and the manipulation of cognitive components of the juggling skills. The transfer to juggling with real balls was evaluated in four different experiments.

Profiling of the Molecular Weight and Structural Isomer Abundance of Macroalgae-Derived Phlorotannins

Directory of Open Access Journals (Sweden)

Natalie Heffernan

2015-01-01

Full Text Available Phlorotannins are a group of complex polymers of phloroglucinol (1,3,5-trihydroxybenzene unique to macroalgae. These phenolic compounds are integral structural components of the cell wall in brown algae, but also play many secondary ecological roles such as protection from UV radiation and defense against grazing. This study employed Ultra Performance Liquid Chromatography (UPLC with tandem mass spectrometry to investigate isomeric complexity and observed differences in phlorotannins derived from macroalgae harvested off the Irish coast (Fucus serratus, Fucus vesiculosus, Himanthalia elongata and Cystoseira nodicaulis. Antioxidant activity and total phenolic content assays were used as an index for producing phlorotannin fractions, enriched using molecular weight cut-off dialysis with subsequent flash chromatography to profile phlorotannin isomers in these macroalgae. These fractions were profiled using UPLC-MS with multiple reaction monitoring (MRM and the level of isomerization for specific molecular weight phlorotannins between 3 and 16 monomers were determined. The majority of the low molecular weight (LMW phlorotannins were found to have a molecular weight range equivalent to 4–12 monomers of phloroglucinol. The level of isomerization within the individual macroalgal species differed, resulting in substantially different numbers of phlorotannin isomers for particular molecular weights. F. vesiculosus had the highest number of isomers of 61 at one specific molecular mass, corresponding to 12 phloroglucinol units (PGUs. These results highlight the complex nature of these extracts and emphasize the challenges involved in structural elucidation of these compounds.

Polydisperse-particle-size-distribution function determined from intensity profile of angularly scattered light

International Nuclear Information System (INIS)

Alger, T.W.

1979-01-01

A new method for determining the particle-size-distribution function of a polydispersion of spherical particles is presented. The inversion technique for the particle-size-distribution function is based upon matching the measured intensity profile of angularly scattered light with a summation of the intensity contributions of a series of appropriately spaced, narrowband, size-distribution functions. A numerical optimization technique is used to determine the strengths of the individual bands that yield the best agreement with the measured scattered-light-intensity profile. Because Mie theory is used, the method is applicable to spherical particles of all sizes. Several numerical examples demonstrate the application of this inversion method

Noise and light exposures for extremely low birth weight newborns during their stay in the neonatal intensive care unit.

Science.gov (United States)

Lasky, Robert E; Williams, Amber L

2009-02-01

The objectives of this study were to characterize noise and light levels for extremely low birth weight newborns throughout their stay in the NICU, evaluate factors influencing noise and light levels, and determine whether exposures meet recommendations from the American Academy of Pediatrics. Sound and light were measured inside the beds of extremely low birth weight newborns (n = 22) from birth to discharge. Measurements were recorded for 20 consecutive hours weekly from birth until 36 weeks' postmenstrual age, biweekly until 40 weeks, and every 4 weeks thereafter. Clinical variables including bed type and method of respiratory support were recorded at each session. Age-related changes in respiratory support and bed type explained the weekly increase of 0.22 dB in sound level and 3.67 lux in light level. Old incubators were the noisiest bed types, and new incubators were the quietest. Light levels were significantly higher in open beds than in incubators. The variations in noise and light levels over time were greatest for open beds. Noise and light levels were much less affected by respiratory support in incubators compared with open beds. A typical extremely low birth weight neonate was exposed to noise levels averaging 56.44 dB(A) and light levels averaging 70.56 lux during their stay from 26 to 42 weeks' postmenstrual age in the NICU. Noise levels were rarely within American Academy of Pediatrics recommendations (5.51% of the time), whereas light levels almost always met recommendations (99.37% of the time). Bed type and respiratory support explained differences in noise and light levels that extremely low birth weight newborns experience during their hospital stay. Noise levels exceeded recommendations, although evidence supporting those recommendations is lacking. Well-designed intervention studies are needed to determine the effects of noise reduction on the development of extremely low birth weight newborns.

A novel full-angle scanning light scattering profiler to quantitatively evaluate forward and backward light scattering from intraocular lenses

International Nuclear Information System (INIS)

Walker, Bennett N.; James, Robert H.; Ilev, Ilko K.; Calogero, Don

2015-01-01

Glare, glistenings, optical defects, dysphotopsia, and poor image quality are a few of the known deficiencies of intraocular lenses (IOLs). All of these optical phenomena are related to light scatter. However, the specific direction that light scatters makes a critical difference between debilitating glare and a slightly noticeable decrease in image quality. Consequently, quantifying the magnitude and direction of scattered light is essential to appropriately evaluate the safety and efficacy of IOLs. In this study, we introduce a full-angle scanning light scattering profiler (SLSP) as a novel approach capable of quantitatively evaluating the light scattering from IOLs with a nearly 360° view. The SLSP method can simulate in situ conditions by controlling the parameters of the light source including angle of incidence. This testing strategy will provide a more effective nonclinical approach for the evaluation of IOL light scatter

A novel full-angle scanning light scattering profiler to quantitatively evaluate forward and backward light scattering from intraocular lenses

Energy Technology Data Exchange (ETDEWEB)

Walker, Bennett N., E-mail: bennett.walker@fda.hhs.gov [Optical Therapeutics and Medical Nanophotonics Laboratory, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); Office of Device Evaluation, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); James, Robert H.; Ilev, Ilko K. [Optical Therapeutics and Medical Nanophotonics Laboratory, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); Calogero, Don [Office of Device Evaluation, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States)

2015-09-15

Glare, glistenings, optical defects, dysphotopsia, and poor image quality are a few of the known deficiencies of intraocular lenses (IOLs). All of these optical phenomena are related to light scatter. However, the specific direction that light scatters makes a critical difference between debilitating glare and a slightly noticeable decrease in image quality. Consequently, quantifying the magnitude and direction of scattered light is essential to appropriately evaluate the safety and efficacy of IOLs. In this study, we introduce a full-angle scanning light scattering profiler (SLSP) as a novel approach capable of quantitatively evaluating the light scattering from IOLs with a nearly 360° view. The SLSP method can simulate in situ conditions by controlling the parameters of the light source including angle of incidence. This testing strategy will provide a more effective nonclinical approach for the evaluation of IOL light scatter.

Filling material for a buried cavity in a collapse area using light-weighted foam and active feldspar

Science.gov (United States)

Cho, Jin Woo; Lee, Ju-hyoung; Kim, Sung-Wook; Choi, Eun-Kyeong

2017-04-01

Concrete which is generally used as filling material for a buried cavity has very high strength but significantly high self-load is considered its disadvantage. If it is used as filling material, the second collapse due to additional load, causing irreversible damage. If light-weighted foam and active feldspar are used to solve this problem, the second collapse can be prevented by reducing of self-load of filling material. In this study, the specimen was produced by mixing light-weighted foam, active feldspar and cement, and changes in the density, unconfined compressive strength and hydraulic conductivity were analyzed. Using the light-weighted foam could enable the adjustment of density of specimen between 0.5 g/cm3 and 1.7 g/cm3, and if the mixing ratio of the light-weighted foam increases, the specimen has more pores and smaller range of cross-sectional area. It is confirmed that it has direct correlation with the density, and if the specimen has more pores, the density of the specimen is lowered. The density of the specimen influences the unconfined compressive strength and the hydraulic conductivity, and it was also confirmed that the unconfined compressive strength could be adjusted between 0.6 MPa and 8 MPa and the hydraulic conductivity could be adjusted between 10-9cm/sec and 10-3cm/sec. These results indicated that we can adjust unconfined compressive strength and hydraulic conductivity of filling materials by changing the mixing amount of lightweight-weighted foam according to the requirements of the field condition. Keywords: filling material, buried cavity, light-weighted foam, feldspar Acknowledgement This research was supported by a Grant from a Strategic Research Project (Horizontal Drilling and Stabilization Technologies for Urban Search and Rescue (US&R) Operation) funded by the Korea Institute of Civil Engineering and Building Technology.

ON THE INVERSION OF STOKES PROFILES WITH LOCAL STRAY-LIGHT CONTAMINATION

International Nuclear Information System (INIS)

Asensio Ramos, A.; Manso Sainz, R.

2011-01-01

Obtaining the magnetic properties of non-resolved structures in the solar photosphere is always challenging and problems arise because the inversion is carried out through the numerical minimization of a merit function that depends on the proposed model. We investigate the reliability of inversions in which the stray-light contamination is obtained from the same observations as a local average. In this case, we show that it is fundamental to include the covariance between the observed Stokes profiles and the stray-light contamination. The ensuing modified merit function of the inversion process penalizes large stray-light contaminations simply because of the presence of positive correlations between the observables and the stray light, fundamentally produced by spatially variable systematics. We caution that if the wrong merit function is used, artificially large stray-light contaminations might be inferred. Since this effect disappears if the stray-light contamination is obtained as an average over the full field of view, we recommend taking into account stray-light contamination using a global approach.

Data Base for Light-Weight Automotive Diesel Power Plants: Volume 1. Executive Summary.

Science.gov (United States)

1979-12-01

The effects on fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

Data Base for Light-Weight Automotive Diesel Power Plants : Volume 3. Miscellaneous Data.

Science.gov (United States)

1979-12-01

The effects of fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

Light-weight aluminium bridges and bridge decks. An overview of recent applications

NARCIS (Netherlands)

Maljaars, J.; Soetens, F.; Kluyver, D. de

2008-01-01

The last decades have shown a large increase in the application of aluminium alloys for light-weight bridges. For bridge construction, aluminium alloys have some specific advantages, but also some points of attention. This paper deals with some recent projects of aluminium bridges, and for these

THE EFFECT OF WEIGHT LOSS ON PLASMA MDA, LIPIDS PROFILE AND APOA AND APOB IN OBESE WOMAN

Directory of Open Access Journals (Sweden)

Fatemeh Ramezani

2010-12-01

Full Text Available Abstract   INTRODUCTION: Obesity increased reactive oxygen species generation that it result in oxidative injury on lipids profile and lipoproteins that all of which insert atherosclerotic effect. Nutritional intervention by means of a hypocaloric diet could produce protective effects against the redox unbalance.  In this context, the aim of this intervention trial was to estimate the ability of weight loss to improve oxidative stress biomarkers related to lipids peroxidation and lipid profile and apoproteins concentrations of serum in obese women.   METHODS: Thirties eight obese women, 15-45 years old, with body mass index (BMI <30 kg/m2 were recruited. The obese women were assigned to energy-restricted dietary treatments for 12 week. Before and after nutritional intervention and 10% weight reduction, anthropometric measurements were taken and fasting blood was drawn. Plasma levels of (MDA determined with TBAR and triglyceride, total cholesterol and HDL cholesterol. Keywords: MDA, lipid profile, obese woman, Weight loss.

Birth Weight, Postnatal Weight Gain, and Childhood Adiposity in Relation to Lipid Profile and Blood Pressure During Early Adolescence.

Science.gov (United States)

Hulst, Andraea Van; Barnett, Tracie A; Paradis, Gilles; Roy-Gagnon, Marie-Hélène; Gomez-Lopez, Lilianne; Henderson, Mélanie

2017-08-04

Different pathways likely underlie the association between early weight gain and cardiovascular disease risk. We examined whether birth weight for length relationship and weight gain up to 2 years of age are associated with lipid profiles and blood pressure (BP) in early adolescence and determined whether childhood adiposity mediates these associations. Data from QUALITY (Quebec Adipose and Lifestyle Investigation in Youth), a cohort of white children with parental history of obesity, were analyzed (n=395). Sex-specific weight for length z scores from birth to 2 years were computed. Rate of postnatal weight gain was estimated using individual slopes of weight for length z -score measurements. Percentage of body fat was measured at 8 to 10 years. Fasting lipids and BP were measured at 10 to 12 years. Using path analysis, we found indirect effects of postnatal weight gain, through childhood adiposity, on all outcomes: Rate of postnatal weight for length gain was positively associated with childhood adiposity, which in turn was associated with unfavorable lipid and BP levels in early adolescence. In contrast, small beneficial direct effects on diastolic BP z scores, independent of weight at other time points, were found for birth weight for length (β=-0.05, 95% CI, -0.09 to -0.002) and for postnatal weight gain (β=-0.02, 95% CI, -0.03 to -0.002). Among children with at least 1 obese parent, faster postnatal weight gain leads to cardiovascular risk factors in early adolescence through its effect on childhood adiposity. Although heavier newborns may have lower BP in early adolescence, this protective direct effect could be offset by a deleterious indirect effect linking birth weight to later adiposity. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Pre-pregnancy weight status, early pregnancy lipid profile and blood pressure course during pregnancy: The ABCD study

NARCIS (Netherlands)

Oostvogels, Adriëtte J. J. M.; Busschers, Wim B.; Spierings, Eline J. M.; Roseboom, Tessa J.; Gademan, Maaike G. J.; Vrijkotte, Tanja G. M.

2017-01-01

Although pre-pregnancy weight status and early pregnancy lipid profile are known to influence blood pressure course during pregnancy, little is known about how these two factors interact. The association between pre-pregnancy weight status and blood pressure course during pregnancy was assessed in

Data Base for Light-Weight Automotive Diesel Power Plants. Volume 2: Discussion and Results.

Science.gov (United States)

1979-12-01

The effects on fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

An Investigation of Damage Factors in Industrial Scale of Light-Weight Bricks Production

Directory of Open Access Journals (Sweden)

Dwi Wulandari Kiki

2017-01-01

Full Text Available A damage case of light weight brick’s production approximately at 6-7% of total production was found daily in one industry in East Jawa, Indonesia. The physical damage of product always occured. This paper investigates some factors that affect the lost in laboratory analysis. The analysis includes the chemical analysis of raw materials, reactivity of pozzolanic materials, and observation of strength based upon the position of light-weight bricks during autoclaving process. In addition, fly ash is introduced as mineral additive as one of the alternatives to improve the product’s quality. It is also concluded that grinding the silica sands particles is the optimum way to improve the quality, but the adding class F of fly ash to five percent in mixture is the most effective solution. Furthermore, maintaining quality of raw materials, curing process, and maintaining the machine will either reduce the product damage that occurred during the fabrication process in industry.

Accelerometer profiles of physical activity and inactivity in normal weight, overweight, and obese U.S. men and women.

Science.gov (United States)

Tudor-Locke, Catrine; Brashear, Meghan M; Johnson, William D; Katzmarzyk, Peter T

2010-08-03

The 2005-2006 National Health and Nutrition Examination Survey (NHANES) is used to describe an accelerometer-derived physical activity/inactivity profile in normal weight (BMI /= 30 kg/m2) U.S. adults. We computed physical activity volume indicators (activity counts/day, uncensored and censored steps/day), rate indicators (e.g., steps/minute), time indicators (employing NHANES activity counts/minute cut points to infer time in non-wear, sedentary, low, light, moderate, and vigorous intensities), the number of breaks in sedentary time (occasions when activity counts rose from /= 100 activity counts in the subsequent minute), achievement of public health guidelines, and classification by step-defined physical activity levels. Data were examined for evidence of consistent and significant gradients across BMI-defined categories. In 2005-2006, U.S adults averaged 6,564 +/- SE 107 censored steps/day, and after considering non-wear time, they spent approximately 56.8% of the rest of the waking day in sedentary time, 23.7% in low intensity, 16.7% in light intensity, 2.6% in moderate intensity, and 0.2% in vigorous intensity. Overall, approximately 3.2% of U.S. adults achieved public health guidelines. The normal weight category took 7,190 +/- SE 157 steps/day, and spent 25.7 +/- 0.9 minutes/day in moderate intensity and 7.3 +/- 0.4 minutes/day in vigorous intensity physical activity. The corresponding numbers for the overweight category were 6,879 +/- 140 steps/day, 25.3 +/- 0.9 minutes/day, and 5.3 +/- 0.5 minutes/day and for the obese category 5,784 +/- 124 steps/day, 17.3 +/- 0.7 minutes/day and 3.2 +/- 0.4 minutes/day. Across BMI categories, increasing gradients and significant trends were apparent in males for sedentary time and decreasing gradients and significant trends were evident in time spent in light intensity, moderate intensity, and vigorous intensity. For females, there were only consistent gradients and significant trends apparent for decreasing amounts of

Experimental Study of Reinforced Light Weight Concrete Beams

Directory of Open Access Journals (Sweden)

Hassanien Mohammed Thiyab

2016-12-01

Full Text Available This study provides a new technique for a lightweight concrete on one side and contribute to the application of sustainability principle by another side. The lightweight concrete was produced by replacing the coarse aggregate in the concrete mix by crushed bricks after conducting the sieve analysis process. To apply this technique to reinforced concrete beams, seven specimens having dimensions (1200 mm length × 200mm height × 100 mm width for each were poured. The first of these beams had made from ordinary concrete, and the rest lightweight different mix design as well as the casting of three cubes and a three-cylinder with each beam. After curing the specimens with water to the age 28 days, they were examined in the laboratory. Using different design mixes of concrete and with the help of super stabilizer material , good compressive strength of concrete was obtained so it become more effective lightweight in structure. By comparing between the results of the light and normal weight concrete beams, it is found reducing in the weight of concrete by about 23% due to using this technique ,the ultimate strength increased to about 32.1% and the deflection decreased about 46.7% .

Molecular dynamics simulations of ion range profiles for heavy ions in light targets

Energy Technology Data Exchange (ETDEWEB)

Lan, C. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Xue, J.M. [State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Zhang, Y., E-mail: Zhangy1@ornl.gov [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Morris, J.R. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Zhu, Z. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Gao, Y.; Wang, Y.G.; Yan, S. [State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Weber, W.J. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

2012-09-01

The determination of stopping powers for slow heavy ions in targets containing light elements is important to accurately describe ion-solid interactions, evaluate ion irradiation effects and predict ion ranges for device fabrication and nuclear applications. Recently, discrepancies of up to 40% between the experimental results and SRIM (Stopping and Range of Ions in Matter) predictions of ion ranges for heavy ions with medium and low energies (<{approx}25 keV/nucleon) in light elemental targets have been reported. The longer experimental ion ranges indicate that the stopping powers used in the SRIM code are overestimated. Here, a molecular dynamics simulation scheme is developed to calculate the ion ranges of heavy ions in light elemental targets. Electronic stopping powers generated from both a reciprocity approach and the SRIM code are used to investigate the influence of electronic stopping on ion range profiles. The ion range profiles for Au and Pb ions in SiC and Er ions in Si, with energies between 20 and 5250 keV, are simulated. The simulation results show that the depth profiles of implanted ions are deeper and in better agreement with the experiments when using the electronic stopping power values derived from the reciprocity approach. These results indicate that the origin of the discrepancy in ion ranges between experimental results and SRIM predictions in the low energy region may be an overestimation of the electronic stopping powers used in SRIM.

Dim light at night disrupts molecular circadian rhythms and increases body weight.

Science.gov (United States)

Fonken, Laura K; Aubrecht, Taryn G; Meléndez-Fernández, O Hecmarie; Weil, Zachary M; Nelson, Randy J

2013-08-01

With the exception of high latitudes, life has evolved under bright days and dark nights. Most organisms have developed endogenously driven circadian rhythms that are synchronized to this daily light/dark cycle. In recent years, humans have shifted away from the naturally occurring solar light cycle in favor of artificial and sometimes irregular light schedules produced by electric lighting. Exposure to unnatural light cycles is increasingly associated with obesity and metabolic syndrome; however, the means by which environmental lighting alters metabolism are poorly understood. Thus, we exposed mice to dim light at night and investigated changes in the circadian system and metabolism. Here we report that exposure to ecologically relevant levels of dim (5 lux) light at night altered core circadian clock rhythms in the hypothalamus at both the gene and protein level. Circadian rhythms in clock expression persisted during light at night; however, the amplitude of Per1 and Per2 rhythms was attenuated in the hypothalamus. Circadian oscillations were also altered in peripheral tissues critical for metabolic regulation. Exposure to dimly illuminated, as compared to dark, nights decreased the rhythmic expression in all but one of the core circadian clock genes assessed in the liver. Additionally, mice exposed to dim light at night attenuated Rev-Erb expression in the liver and adipose tissue. Changes in the circadian clock were associated with temporal alterations in feeding behavior and increased weight gain. These results are significant because they provide evidence that mild changes in environmental lighting can alter circadian and metabolic function. Detailed analysis of temporal changes induced by nighttime light exposure may provide insight into the onset and progression of obesity and metabolic syndrome, as well as other disorders involving sleep and circadian rhythm disruption.

Metrology and Alignment of Light Weight Grazing Incidence X-Ray Mirrors

Science.gov (United States)

Zhang, William; Content, David; Petre, Robert; Saha, Timo

2000-01-01

Metrology and alignment of light weight X-ray optics have been a challenge for two reasons: (1) that the intrinsic mirror quality and distortions caused by handling can not be easily separated, and (2) the diffraction limits of the visible light become a severe problem at the order of one arc-minute. Traditional methods of using a normal incident pencil or small parallel beam which monitors a tiny fraction of the mirror in question at a given time can not adequately monitor those distortions. We are developing a normal incidence setup that monitors a large fraction, if not the whole, of the mirror at any given time. It will allow us to align thin X-ray mirrors to-an accuracy of a few arc seconds or to a limit dominated by the mirror intrinsic quality.

Finite element simulation of a novel composite light-weight microporous cladding panel

Science.gov (United States)

Tian, Lida; Wang, Dongyan

2018-04-01

A novel composite light-weight microporous cladding panel with matched connection detailing is developed. Numerical simulation on the experiment is conducted by ABAQUS. The accuracy and rationality of the finite element model is verified by comparison between the simulation and the experiment results. It is also indicated that the novel composite cladding panel is of desirable bearing capacity, stiffness and deformability under out-of-plane load.

Towards a Light-weight Bag-of-tasks Grid Architecture

Directory of Open Access Journals (Sweden)

I. Bašičević

2015-06-01

Full Text Available The paper presents the application of SIP protocol in the context of bag-of-tasks grid architecture. The SIP protocol has been used in the realization of the execution management service. The main idea is the use of stateful SIP proxy as a request broker. The paper provides a description of the concept, and the prototype system that has been built, as well as the calculation of estimated performance level and its relation to maximum RTT of grid system. The main advantage of this light-weight grid architecture is the reuse of a mature infrastructure. A short overview of some approaches to the mathematical modeling of computer grids is included.

Effect of repeated administration of cinnamon aqueous extract on body weight, glucose levels and lipid profile on over weight rats

International Nuclear Information System (INIS)

Bano, F.; Akhtar, N.

2012-01-01

Plants are the source of both traditional and medicinal plant for curing and treatment of diseases in recent year. Plant extracts containing several active constituents which often work together synergistically. The study was designed to investigate the effect CNAE on lipid profile and glucose level in overweight albino wistar rats. Animal were divided into two group 1 receive CNAE and 2 receive equal volume of tap water. Extract were given daily once a day at the dose of 2ml/animal. After the 17 % of reduction of weight treatment were terminated and blood sample were collected for biochemical estimation. The result show significant decrease in body weight total Cholesterol, Triglycerides, Low density lipoprotein cholesterol and significant increase in high y density lipoprotein while non-significant effect were observed in electrolyte levels. The data of present research demonstrated that CNAE not only possess hypoglycemic and hypolipidemic properties as well as it could be used for reduction body weight. (author)

Normal Weight but Low Muscle Mass and Abdominally Obese: Implications for the Cardiometabolic Risk Profile in Chronic Obstructive Pulmonary Disease.

Science.gov (United States)

Beijers, Rosanne J H C G; van de Bool, Coby; van den Borst, Bram; Franssen, Frits M E; Wouters, Emiel F M; Schols, Annemie M W J

2017-06-01

It is well established that low muscle mass affects physical performance in chronic obstructive pulmonary disease (COPD). We hypothesize that combined low muscle mass and abdominal obesity may also adversely influence the cardiometabolic risk profile in COPD, even in those with normal weight. The cardiometabolic risk profile and the responsiveness to 4 months high-intensity exercise training was assessed in normal-weight patients with COPD with low muscle mass stratified by abdominal obesity. This is a cross-sectional study including 81 clinically stable patients with COPD (age 62.5 ± 8.2 years; 50.6% males; forced expiratory volume in 1 second 55.1 ± 19.5 percentage predicted) with fat-free mass index risk profile. Triglycerides showed a significant decrease, while the HOMA-IR increased. Abdominal obesity is highly prevalent in normal-weight patients with COPD with low muscle mass who showed an increased cardiometabolic risk compared with patients without abdominal obesity. This cardiometabolic risk profile was not altered after 4 months of exercise training. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Relating shape/weight based self-esteem, depression, and anxiety with weight and perceived physical health among young adults.

Science.gov (United States)

Kamody, Rebecca C; Thurston, Idia B; Decker, Kristina M; Kaufman, Caroline C; Sonneville, Kendrin R; Richmond, Tracy K

2018-06-01

Simultaneous contributions of self-esteem, depression, and anxiety to weight and perceived physical health in young adults is understudied. A diverse sample of 424 young adults completed measures of shape/weight based self-esteem, depression, anxiety, and perceived physical health. Height and weight were measured to calculate body mass index (BMI). Latent profile analysis was conducted to derive patterns of depression, anxiety, and shape/weight based self-esteem. Then, we examined the association of the profiles with weight status and perceived physical health. Three profiles emerged: (1) High Shape/Weight Influence (HSWI); (2) Low Shape/Weight, Depression, & Anxiety Influence (LSWDAI); and (3) High Depression & Anxiety Influence (HDAI). The HSWI profile had significantly higher BMI than the LSWDAI and HDAI profiles, and significantly lower perceived physical health than the LSWDAI profile. Over emphasis on shape/weight, regardless of depression and anxiety, is associated with elevated weight and negative internalized health views. Copyright © 2018 Elsevier Ltd. All rights reserved.

A light/dark cycle in the NICU accelerates body weight gain and shortens time to discharge in preterm infants.

Science.gov (United States)

Vásquez-Ruiz, Samuel; Maya-Barrios, José Alfonso; Torres-Narváez, Patricia; Vega-Martínez, Benito Rubén; Rojas-Granados, Adelina; Escobar, Carolina; Angeles-Castellanos, Manuel

2014-09-01

Bright constant light levels in the NICU may have negative effects on the growth and development of preterm infants The aim of this study is to evaluate the benefits of an alternating light/dark cycle in the NICU on weight gain and early discharge from the therapy in premature infants. A randomized interventional study was designed comparing infants in the NICU of Hospital Juarez de México, exposed from birth either to an LD environment (LD, n=19) or to the traditional continuous light (LL, n=19). The LD condition was achieved by placing individual removable helmets over the infant's heads. Body weight gain was analyzed, as the main indicator of stability and the main criteria for discharge in preterm infants born at 31.73±0.31week gestational age. Infants maintained in an LD cycle gained weight faster than infants in LL and therefore attained a shorter hospital stay, (34.37±3.12 vs 51.11±5.29days; P>0.01). Also, LD infants exhibited improved oxygen saturation and developed a daily melatonin rhythm. These findings provide a convenient alternative for establishing an LD environment for preterm healthy newborns in the NICU and confirm the beneficial effects of an alternating LD cycle for growth and weight gain and for earlier discharge time. Here we provide an easy and practical alternative to implement light/dark conditions in the NICU. Copyright © 2014 Elsevier Ltd. All rights reserved.

Lipidomic profiling of di- and tri-acylglycerol species in weight-controlled mice.

Directory of Open Access Journals (Sweden)

Brenee S King

Full Text Available Weight control by dietary calorie restriction (DCR or exercise has been shown to prevent cancer in various models. However, the mechanisms as to how weight control is beneficial are not well understood. While previous reports have investigated the effects of weight control on total lipid levels or lipid composition within cellular membranes, there has been little work surrounding changes to individual lipids following weight control interventions. In this study, using a model of skin carcinogenesis centered on the tumor promotion stage, CD-1 mice were randomly assigned into 4 groups: ad libitum and sedentary (control, ad libitum with exercise (AL+Exe, exercise with pair feeding of a diet isocaloric with control (PF+Exe, and sedentary with 20% DCR compared to control. After ten weeks, body weight and body fat percentages significantly decreased in the PF+Exe and DCR groups but not AL+Exe when compared with sedentary controls. Murine skin and plasma samples were obtained for analysis. Lipidomics using electrospray ionization MS/MS was employed to profile triacylglycerol (TG and diacylglycerol (DG species. Both plasma and tissue TG species containing fatty acid chains with length 18:1 were significantly decreased following DCR when compared to sedentary control animals. In regards to DG, the most significant changes occurred in the plasma. DG species containing fatty acids with lengths 16:1 or 18:1 were significantly decreased in PF+Exe and DCR groups when compared to sedentary controls. Due to the significant role of TG in energy storage and DG in cellular signaling, our findings of the effects of weight control on individual TG and DG species in plasma and skin tissue following exposure to a tumor promoter, may provide insight into the mechanism of weight control on cancer prevention.

Light-weight radioisotope heater impact tests

International Nuclear Information System (INIS)

Reimus, M.A.H.; Rinehart, G.H.; Herrera, A.

1998-01-01

The light-weight radioisotope heater unit (LWRHU) is a 238 PuO 2 -fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed 238 PuO 2 fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s

A New Light Weight Structural Material for Nuclear Structures

Energy Technology Data Exchange (ETDEWEB)

Rabiei, Afsaneh [North Carolina State Univ., Raleigh, NC (United States)

2016-01-14

Radiation shielding materials are commonly used in nuclear facilities to attenuate the background ionization radiations to a minimum level for creating a safer workplace, meeting regulatory requirements and maintaining high quality performance. The conventional radiation shielding materials have a number of drawbacks: heavy concrete contains a high amount of elements that are not desirable for an effective shielding such as oxygen, silicon, and calcium; a well known limitation of lead is its low machinability and toxicity, which is causing a major environmental concern. Therefore, an effective and environmentally friendly shielding material with increased attenuation and low mass density is desirable. Close-cell composite metal foams (CMFs) and open-cell Al foam with fillers are light-weight candidate materials that we have studied in this project. Close-cell CMFs possess several suitable properties that are unattainable by conventional radiation shielding materials such as low density and high strength for structural applications, high surface area to volume ratio for excellent thermal isolation with an extraordinary energy absorption capability. Open-cell foam is made up of a network of interconnected solid struts, which allows gas or fluid media to pass through it. This unique structure provided a further motive to investigate its application as radiation shields by infiltrating original empty pores with high hydrogen or boron compounds, which are well known for their excellent neutron shielding capability. The resulting open-cell foam with fillers will not only exhibit light weight and high specific surface area, but also possess excellent radiation shielding capability and good processability. In this study, all the foams were investigated for their radiation shielding efficiency in terms of X-ray, gamma ray and neutron. X-ray transmission measurements were carried out on a high-resolution microcomputed tomography (microCT) system. Gamma-emitting sources: 3.0m

A New Light Weight Structural Material for Nuclear Structures

International Nuclear Information System (INIS)

Rabiei, Afsaneh

2016-01-01

Radiation shielding materials are commonly used in nuclear facilities to attenuate the background ionization radiations to a minimum level for creating a safer workplace, meeting regulatory requirements and maintaining high quality performance. The conventional radiation shielding materials have a number of drawbacks: heavy concrete contains a high amount of elements that are not desirable for an effective shielding such as oxygen, silicon, and calcium; a well known limitation of lead is its low machinability and toxicity, which is causing a major environmental concern. Therefore, an effective and environmentally friendly shielding material with increased attenuation and low mass density is desirable. Close-cell composite metal foams (CMFs) and open-cell Al foam with fillers are light-weight candidate materials that we have studied in this project. Close-cell CMFs possess several suitable properties that are unattainable by conventional radiation shielding materials such as low density and high strength for structural applications, high surface area to volume ratio for excellent thermal isolation with an extraordinary energy absorption capability. Open-cell foam is made up of a network of interconnected solid struts, which allows gas or fluid media to pass through it. This unique structure provided a further motive to investigate its application as radiation shields by infiltrating original empty pores with high hydrogen or boron compounds, which are well known for their excellent neutron shielding capability. The resulting open-cell foam with fillers will not only exhibit light weight and high specific surface area, but also possess excellent radiation shielding capability and good processability. In this study, all the foams were investigated for their radiation shielding efficiency in terms of X-ray, gamma ray and neutron. X-ray transmission measurements were carried out on a high-resolution microcomputed tomography (microCT) system. Gamma-emitting sources: 3.0m

Ultra-light-weight high torque density brushless PM machine design: considering driving-cycle of a four-wheel drive race car (EVER15-138)

NARCIS (Netherlands)

Paulides, J.J.H.; Encica, L.; Beernaert, T.F.; Velden, van der H.H.F.; Parfant, A.G.P.; Lomonova, E.A.

2015-01-01

This paper explores the design of an ultra-light-weight power and torque dense motor to enhance the performance of a light-weight electric racing vehicle. Such a racing vehicle is to compete in formula student racing events. The state-of-the-art powertrain in these vehicles are axial-field machines

Body weight regulation and obesity: dietary strategies to improve the metabolic profile.

Science.gov (United States)

Munsters, M J M; Saris, W H M

2014-01-01

This review discusses dietary strategies that may improve the metabolic profile and body weight regulation in obesity. Recent evidence demonstrated that long-term health effects seem to be more beneficial for low-glycemic index (GI) diets compared to high-protein diets. Still, these results need to be confirmed by other prospective cohort studies and long-term clinical trials, and the discrepancy between these study designs needs to be explored in more detail. Furthermore, the current literature is mixed with regard to the efficacy of increased meal frequency (or snacking) regimens in causing metabolic alterations, particularly in relation to body weight control. In conclusion, a growing body of evidence suggests that dietary strategies with the aim to reduce postprandial insulin response and increase fat oxidation, and that tend to restore metabolic flexibility, have a place in the prevention and treatment of obesity and associated metabolic disorders.

Influence of light-weight organic matters on strontium sorption to bentonite

International Nuclear Information System (INIS)

Wang, Tsing-Hai; Wu, Ding-Chiang; Teng, Shi-Ping

2010-01-01

Document available in extended abstract form only. Light-weight organic matters were frequently observed in groundwater. Their existence had significant influence on the transport of radionuclides. In this study, light-weight organic acid species including oxalic (MW 90), succinic (MW 118), adipic (MW 146), azelaic (MW 188), eicosanedioic (MW 306), benzoic (MW 122), salicylic (MW 138), and gallic (MW 170) were selected as the surrogate of natural organic matters. Their effects on strontium sorption to bentonite were evaluated by using a surface complexation model MINEQL+. Under this framework, three sorption mechanisms were considered: 1. structure sorption sites, 2. edge sorption sites, 3. further hydration of adsorbed Sr 2+ . The presence of organic species had no influence on Sr cation sorption to structure sorption sites. However, Sr cation sorption to edge sorption was affected by the organics to certain extent. For example, sorption capability of edge sites toward Sr was increased by the gallic species. Furthermore, hydration of adsorbed Sr was significantly affected by the presence of organic species. This might relate to that adsorbed Sr would become the bridge associating organic species on bentonite surfaces, but this argument required more solid spectral evidences to support. Some preliminary observations on Sr sorption to bentonite were obtained in this work; however, further experiments are still required by conducting experiments with more variety of organic species. By doing a comprehensive study, it would be much beneficial to make a more accurate evaluation of the influence of organic matters on Sr sorption

The Effects of 6 Isocaloric Meals on Body Weight, Lipid Profiles, Leptin, and Adiponectin in Overweight Subjects (BMI > 25)

OpenAIRE

Zeynab Hatami Zargaran; Moosa Salehi; Seyed Taghi Heydari; Siavash Babajafari

2014-01-01

Background: It seems that meal frequency is negatively related to body weight, but the relationship between meal frequency and weight loss is not clearly known yet. Objectives: The present study aimed to investigate whether 6 isocaloric meals affected body weight, lipid profiles, leptin, and adiponectin in overweight subjects. Methods: The present randomized controlled trial was conducted on 90 overweight subjects in 3 months. The subjects were randomly divided into two groups. The co...

Evaluation of physical property of light-weight soil with air foam using X-ray CT method

International Nuclear Information System (INIS)

Otani, Jun; Mukunoki, Toshifumi; Kikuchi, Yoshiaki

2000-01-01

The objective of this paper is to investigate the physical property of light-weight soil made of dredged slurry mixed with air foam and cement using X-ray CT method. In this study, not only the specimen made in laboratory but also the one sampled at the in-situ construction site were used and the property in the soil was visualized and the distributions of the density an air porosity were evaluated quantitatively using the results of CT scanning. Here, the method of image processing analysis was also used for this evaluation study. Based on the results obtained in this study, it is concluded that the X-ray CT method is a powerful tool even for geotechnical engineering and this makes not only the visualization but also the quantitative ion discussion possible for the light-weight soil with air foam. (author)

Light weight radioisotope heater unit (LWRHU) production for the Cassini mission

International Nuclear Information System (INIS)

Rinehart, G.H.

1997-01-01

The Light-Weight Radioisotope Heater Unit (LWRHU) is a [sup 238]PuO[sub 2] fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. The heat sources are required to maintain the temperature of specific components within normal operating ranges. The heat source consists of a hot- pressed [sup 238]PuO[sub 2] fuel pellet, a Pt-3ORh vented capsule, a pyrolytic graphite insulator, and a woven graphite aeroshell assembly. Los Alamos National Laboratory has fabricated 180 heat sources, 157 of which will be used on the Cassini mission

Effects of lighting and air-conditioning systems on growth weight and functional composition of frill-lettuce produced in plant factory

Science.gov (United States)

Yoshida, Atsumasa; Okamura, Nobuya; Furukawa, Hajime; Myojin, Chiho; Moriuchi, Koji; Kinoshita, Shinichi

2017-06-01

The aim of the present study was to develop optimal air-conditioning systems for plant factories. To verify the effect of particular air-conditioning and lighting systems, cultivation experiments were performed with frill-lettuce for two weeks. In the present study, the relationship between the cultivation condition, the yield (i.e., increase in edible portion weight), and the functional components were discussed. Based on the measured data, increased photosynthetic photon flux density increased antioxidative activity and edible portion weight, possibly because high light intensities are stressful for frill lettuce. Antioxidative activity also increased under conditions of low CO2 concentration, weak and strong winds, and high air temperature because these conditions became stresses for the plants. However, a decrease in edible portion weight was observed under these conditions, implying there is a negative correlation between antioxidative activity and edible portion weight.

Orlistat in polycystic ovarian syndrome reduces weight with improvement in lipid profile and pregnancy rates

Directory of Open Access Journals (Sweden)

Pratap Kumar

2014-01-01

Full Text Available Background: The effects of exercise, metformin, and orlistat on anthropometric parameters, lipid profile, endocrine parameters, and ovulation in polycystic ovarian syndrome (PCOS women were compared. AIM: The aim was to study the efficacy of orlistat compared with metformin and exercise in PCOS. DESIGN: Randomized control trial. Methods: A total of 90 eligible PCOS women were randomly assigned to receive either of the two drugs (orlistat or metformin in combination with lifestyle interventions or as controls where they received lifestyle interventions alone. Anthropometric parameters were assessed at baseline and 4 weekly intervals for 3 months. Androgen levels, insulin resistance, ovulation and conception rates and lipid profile were also assessed at the end of study. Statistical Analysis: Statistical analysis was performed using the SPSS version 17.0. Results: The levels of fasting blood sugar, fasting insulin and homeostatic model assessment insulin resistance were comparable in three treatment groups. Mean total testosterone, serum hormone binding globulin, free androgen index, dehydroepiandrosterone sulfate in all arms were comparable and statistically nonsignificant. However, orlistat and metformin were more effective in reducing weight, body mass index, waist circumference and waist-hip ratio. However, side-effects were less with orlistat. Ovulation rate was 33.3%, 23.35% with orlistat and metformin group respectively, but were not statistically significant. In orlistat group, significant improvement was observed in lipid profile at the end of 3 months. Conception rates were 40% and 16.7% and 3.3% in orlistat, metformin group and control group respectively (P - 0.003. Weight loss was found to be the best predictor of ovulation with sensitivity with good sensitivity. Conclusion: Orlistat is as effective as metformin in reducing weight and achieves similar ovulation rates in obese PCOS patients. However, orlistat has minimal side

Weight reduction of automobile parts using light metals. Keikinzoku shiyo ni yoru jidosha buhin no keiryoka

Energy Technology Data Exchange (ETDEWEB)

Hayashi, S [Toyota Motor Corp., Aichi (Japan)

1992-12-25

Weight reduction of automobiles is required from the viewpoint of reduction of CO2 emission and energy conservation. Comparing a car with another one of almost the same size and performance with 1% reduced weight, combustion efficiency of the latter can be improved by 0.5-0.8%. This report introduces several examples, in which steel parts are replaced with light alloy parts to reduce car weight, and describes the future perspective. Concerning a cylinder block which is the heaviest part among engine parts, a block made of aluminum alloy with no cast liner has been developed. There is also an example of an oil pan adopting aluminum die-cast for a part of it. A valve lifter made of aluminum alloy has been developed for valve system parts and has contributed to friction loss, noise reduction, and improvement of fuel consumption. As for steering system parts, a steering bracket made of Mg alloy die-cast has been developed. The use of light alloy parts, in general, increases material cost. Therefore it is now required to build up closer connection between designs and production techniques and to improve reliability of casting and forging technologies. 5 refs., 20 figs.

Design optimization on the drive train of a light-weight robotic arm

DEFF Research Database (Denmark)

Zhou, Lelai; Bai, Shaoping; Hansen, Michael Rygaard

2011-01-01

A drive train optimization method for design of light-weight robots is proposed. Optimal selections of motors and gearboxes from a limited catalog of commercially available components are done simultaneously for all joints of a robotic arm. Characteristics of the motor and gearbox, including gear...... ratio, gear inertia, motor inertia, and gear efficiency, are considered in the drive train modeling. A co-simulation method is developed for dynamic simulation of the arm. A design example is included to demonstrate the proposed design optimization method....

Ultra High Temperature and Multifunctional Ceramic Matrix Composite – Coating Systems for Light-Weight Space and Aero Systems

Data.gov (United States)

National Aeronautics and Space Administration — Revolutionary ultra-high temperature, high mechanical loading capable, oxidation resistant, durable ceramic coatings and light-weight fiber-reinforced Ceramic Matrix...

Weighted profile likelihood-based confidence interval for the difference between two proportions with paired binomial data.

Science.gov (United States)

Pradhan, Vivek; Saha, Krishna K; Banerjee, Tathagata; Evans, John C

2014-07-30

Inference on the difference between two binomial proportions in the paired binomial setting is often an important problem in many biomedical investigations. Tang et al. (2010, Statistics in Medicine) discussed six methods to construct confidence intervals (henceforth, we abbreviate it as CI) for the difference between two proportions in paired binomial setting using method of variance estimates recovery. In this article, we propose weighted profile likelihood-based CIs for the difference between proportions of a paired binomial distribution. However, instead of the usual likelihood, we use weighted likelihood that is essentially making adjustments to the cell frequencies of a 2 × 2 table in the spirit of Agresti and Min (2005, Statistics in Medicine). We then conduct numerical studies to compare the performances of the proposed CIs with that of Tang et al. and Agresti and Min in terms of coverage probabilities and expected lengths. Our numerical study clearly indicates that the weighted profile likelihood-based intervals and Jeffreys interval (cf. Tang et al.) are superior in terms of achieving the nominal level, and in terms of expected lengths, they are competitive. Finally, we illustrate the use of the proposed CIs with real-life examples. Copyright © 2014 John Wiley & Sons, Ltd.

Compact, Light-weight and Cost-effective Microscope based on Lensless Incoherent Holography for Telemedicine Applications

Science.gov (United States)

Mudanyali, Onur; Tseng, Derek; Oh, Chulwoo; Isikman, Serhan O.; Sencan, Ikbal; Bishara, Waheb; Oztoprak, Cetin; Seo, Sungkyu; Khademhosseini, Bahar; Ozcan, Aydogan

2010-01-01

Despite the rapid progress in optical imaging, most of the advanced microscopy modalities still require complex and costly set-ups that unfortunately limit their use beyond well equipped laboratories. In the meantime, microscopy in resource-limited settings has requirements significantly different from those encountered in advanced laboratories, and such imaging devices should be cost-effective, compact, light-weight and appropriately accurate and simple to be usable by minimally trained personnel. Furthermore, these portable microscopes should ideally be digitally integrated as part of a telemedicine network that connects various mobile health-care providers to a central laboratory or hospital. Toward this end, here we demonstrate a lensless on-chip microscope weighing ~46 grams with dimensions smaller than 4.2cm × 4.2cm × 5.8cm that achieves sub-cellular resolution over a large field of view of ~24 mm2. This compact and light-weight microscope is based on digital in-line holography and does not need any lenses, bulky optical/mechanical components or coherent sources such as lasers. Instead, it utilizes a simple light-emitting-diode (LED) and a compact opto-electronic sensor-array to record lensless holograms of the objects, which then permits rapid digital reconstruction of regular transmission or differential interference contrast (DIC) images of the objects. Because this lensless incoherent holographic microscope has orders-of-magnitude improved light collection efficiency and is very robust to mechanical misalignments it may offer a cost-effective tool especially for telemedicine applications involving various global health problems in resource limited settings. PMID:20401422

Association of light-to-moderate alcohol drinking in pregnancy with preterm birth and birth weight

DEFF Research Database (Denmark)

Strandberg-Larsen, Katrine; Poulsen, Gry; Bech, Bodil Hammer

2017-01-01

Women who drink light-to-moderately during pregnancy have been observed to have lower risk of unfavourable pregnancy outcomes than abstainers. This has been suggested to be a result of bias. In a pooled sample, including 193 747 live-born singletons from nine European cohorts, we examined...... alcohol. This decreased to 39% in 2000–2004, and 14% in 2005–2011. Before 2000, every additional drink was associated with reduced mean birth weight, whereas in 2005–2011, the mean birth weight increased with increasing intake. The period-specific associations between low-to-moderate drinking and birth...

Molecular weight profiles of proanthocyanidin polymers

Science.gov (United States)

Vincent M. Williams; Lawrence J. Porter; Richard W. Hemingway

1983-01-01

The MW profiles of proanthocyanidin polymers (condensed tannins) from 32 samples representing a wide range of plant tissues of many different species have been obtained by gel permeation chromatography of the peracetate derivatives. The tannins vary widely in MW, with M values for the peracetates in the range 1600-5500. The MW profiles vary greatly from those with...

Ewe's diet (pasture vs grain-based feed) affects volatile profile of cooked meat from light lamb.

Science.gov (United States)

Almela, Elisabeth; Jordán, María José; Martínez, Cristina; Sotomayor, José Antonio; Bedia, Mario; Bañón, Sancho

2010-09-08

The effects of ewe's diet during gestation and lactation on the volatile compounds profile in cooked meat from light lamb were compared. Two lamb groups from ewes that had been fed pasture (PA) or grain-based concentrate (FE) were tested. Cooked loin mixed with saliva was analyzed by solid phase microextraction, gas chromatography, and mass spectrometry. The fiber coating used was divinylbenzene-carboxen-polydimethylsiloxane. The volatiles detected and quantified were aldehydes, alcohols, ketones, phenols, indole, and sulfur compounds. The ewe's diet strongly affected the volatile compounds profile of the cooked meat. The total volatiles concentration was higher in PA (409 mg kg(-1)) than in FE (201 mg kg(-1)). The major volatiles in PA were phenol, 4-methylphenol, and hexanoic acid, while the major volatile in FE was 3-hydroxy-2-butanone. No branched C8-C9 fatty acids responsible for mutton flavor were detected in either group. The findings suggest that nutritional strategies can be use during gestation and lactation to modify the aroma of light lamb meat in the light of consumer preferences.

Ultra light weight refractory material for high temperature applications

Energy Technology Data Exchange (ETDEWEB)

Finke, V.; Kern, H. [Rath GmbH, Meissen (Germany); Springer, M. [Aug. Rath jun. GmbH, Vienna (Austria)

2007-07-01

The requirements on companies running high temperature processes, i.e. at temperatures about 1000 C and above, have increased dramatically within the last few years. For technological, economical and ecological purposes each application has to be checked carefully. As well the political discussion regarding environmental pollution, greenhouse effect and emission trading and the guidelines for climate and environmental protection exert massive influence on thermal process technology and pose an appropriate challenge for the companies. Next to costs of labour and raw materials the costs for energy and environmental costs play a decisive role more and more. The pressure on the management thereby incurred may have a lasting effect on innovations regarding increase of energy efficiency, decrease of CO{sub 2}-emission and often on non negligible increase of productivity. Mainly against the background of the highly scheduled European aims for emission reduction and also in consideration of the still proceeding globalisation the usage of state-of-the-art refractory technics in thermal process technology is of particular importance for business success, for reducing of environmental impact and last but not least for conservation and safeguarding of jobs in Europe and Germany. The applications for products made from high-temperature insulation wool in high temperature applications have strongly increased during the last five years. Especially the production capacities of polycrystalline wool (aluminium oxide wool e.g. Altra B72) have been doubled within the last three years. Primarily ultra light weight products made from HTIW are used in industrial furnaces with application temperatures above 1000 C and / or with high thermo-mechanical (thermal shock) and chemical exposure. The outstanding and essential advantages of these materials are obviously: Ultra light weight material with high resilience and flexibility, Optimised energy consumption (energy saving up to 50% compared

Increased antioxidant activity and changes in phenolic profile of Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) specimens grown under supplemental blue light.

Science.gov (United States)

Nascimento, Luana B S; Leal-Costa, Marcos V; Coutinho, Marcela A S; Moreira, Nattacha dos S; Lage, Celso L S; Barbi, Nancy dos S; Costa, Sônia S; Tavares, Eliana S

2013-01-01

Antioxidant compounds protect plants against oxidative stress caused by environmental conditions. Different light qualities, such as UV-A radiation and blue light, have shown positive effects on the production of phenols in plants. Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) is used for treating wounds and inflammations. Some of these beneficial effects are attributed to the antioxidant activity of plant components. We investigated the effects of blue light and UV-A radiation supplementation on the total phenol content, antioxidant activity and chromatographic profile of aqueous extracts from leaves of K. pinnata. Monoclonal plants were grown under white light, white plus blue light and white plus UV-A radiation. Supplemental blue light improved the antioxidant activity and changed the phenolic profile of the extracts. Analysis by HPLC of supplemental blue-light plant extracts revealed a higher proportion of the major flavonoid quercetin 3-O-α-L-arabinopyranosyl (1→2) α-L-rhamnopyranoside, as well as the presence of a wide variety of other phenolic substances. These findings may explain the higher antioxidant activity observed for this extract. Blue light is proposed as a supplemental light source in the cultivation of K. pinnata, to improve its antioxidant activity. © 2012 Wiley Periodicals, Inc. Photochemistry and Photobiology © 2012 The American Society of Photobiology.

Neutron absorption profile in a reactor moderated by different mixtures of light and heavy waters

International Nuclear Information System (INIS)

Nagy, Mohamed E.; Aly, Mohamed N.; Gaber, Fatma A.; Dorrah, Mahmoud E.

2014-01-01

Highlights: • We studied neutron absorption spectra in a mixed water moderated reactor. • Changing D 2 O% in moderator induced neutron energy spectral shift. • Most of the neutrons absorbed in control rods were epithermal. • Control rods worth changes were not proportional to changes of D 2 O% in moderator. • Control rod arrangement influenced the neutronic behavior of the reactor. - Abstract: A Monte-Carlo parametric study was carried out to investigate the neutron absorption profile in a model of LR-0 reactor when it is moderated by different mixtures of heavy/light waters at molecular ratios ranging from 0% up to 100% D 2 O at increments of 10% in D 2 O. The tallies included; neutron absorption profiles in control rods and moderator, and neutron capture profile in 238 U. The work focused on neutron absorption in control rods entailing; total mass of control rods needed to attain criticality, neutron absorption density and total neutron absorption in control rods at each of the studied mixed water moderators. The aim was to explore whether thermal neutron poisons are the most suitable poisons to be used in control rods of nuclear reactors moderated by mixed heavy/light water moderators

PERFORMANCE EVALUATION OF A LIGHT-WEIGHT MULTI-ECHO LIDAR FOR UNMANNED ROTORCRAFT APPLICATIONS

Directory of Open Access Journals (Sweden)

G. Conte

2013-08-01

Full Text Available The paper presents a light-weight and low-cost airborne terrain mapping system. The developed Airborne LiDAR Scanner (ALS system consists of a high-precision GNSS receiver, an inertial measurement unit and a magnetic compass which are used to complement a LiDAR sensor in order to compute a digital surface model. Evaluation of the accuracy of the generated surface model is presented. Additionally, a comparison is provided between the surface model generated from the developed ALS system and a model generated using a commercial photogrammetric software. Finally, the multi-echo capability of the used LiDAR sensor is evaluated in areas covered with dense vegetation. The ALS system and camera systems were mounted on-board an industrial unmanned helicopter of around 100 kilograms maximum take-off weight. Presented results are based on real flight-test data.

Light weight radioisotope heater unit (LWRHU): a technical description of the reference design

International Nuclear Information System (INIS)

Tate, R.E.

1982-01-01

The Light Weight Radioisotope Heater Unit (LWRHU), a new radioisotope heater unit for use in space missions, is a 238 PuO 2 -fueled unit designed to provide a thermal watt in dispersed locations on a spacecraft. The LWRHU is required to maintain the temperature of a component at a level where the component will function reliably in space. Two major constraints are placed on the unit's design; it must be as light as possible and must provide enough protection to immobilize the plutonium fuel to the maximum extent in all phases of the unit's lifetime. The four components are pelletized fuel, platinum-alloy encapsulation, pyrolytic graphite thermal insulation, and high-technology graphite ablation shell. The LWRHU is a cylinder 32 mm (1.26 in.) high and 26 mm (1.02 in.) in diameter. It weighs slightly less than 40 g

A High Resolution, Light-Weight, Synthetic Aperture Radar for UAV Application

International Nuclear Information System (INIS)

Doerry, A.W.; Hensley, W.H.; Stence, J.; Tsunoda, S.I.; Pace, F.; Walker, B.C.; Woodring, M.

1999-06-01

(U) Sandia National Laboratories in collaboration with General Atomics (GA) has designed and built a high resolution, light-weight, Ku-band Synthetic Aperture Radar (SAR) known as ''Lynx''. Although Lynx can be operated on a wide variety of manned and unmanned platforms, its design is optimized for use on medium altitude Unmanned Aerial Vehicles (UAVS). In particular, it can be operated on the Predator, I-GNAT, and Prowler II platforms manufactured by GA. (U) The radar production weight is less than 120 lb and operates within a 3 GHz band from 15.2 GHz to 18.2 GHz with a peak output power of 320 W. Operating range is resolution and mode dependent but can exceed 45 km in adverse weather (4 mm/hr rain). Lynx has operator selectable resolution and is capable of 0.1 m resolution in spotlight mode and 0.3 m resolution in strip map mode, over substantial depression angles (5 to 60 deg) and squint angles (broadside and ±45 deg). Real-time Motion Compensation is implemented to allow high-quality image formation even during vehicle turns and other maneuvers

Laser-light backscattering response to water content and proteolysis in dry-cured ham

DEFF Research Database (Denmark)

Fulladosa, E.; Rubio-Celorio, M.; Skytte, Jacob Lercke

2017-01-01

on the acquisition conditions used. Laser backscattering was influenced by both dryness and proteolysis intensity showing an average light intensity decrease of 0.2 when decreasing water content (1% weight loss) and increasing proteolysis (equivalent to one-hour enzyme action). However, a decrease of scattering area...... was only detected when the water content was decreased (618 mm(2) per 1% weight loss). Changes on scattering of light profiles were only observed when the water content changed. Although there is a good correlation between water content and LBI parameters when analysing commercial samples, proteolysis...... of laser incidence) and to analyse the laser-light backscattering changes caused by additional hot air drying and proteolysis of dry-cured ham slices. The feasibility of the technology to determine water content and proteolysis (which is related to textural characteristics) of commercial sliced dry...

Application of the weighted total field-scattering field technique to 3D-PSTD light scattering model

Science.gov (United States)

Hu, Shuai; Gao, Taichang; Liu, Lei; Li, Hao; Chen, Ming; Yang, Bo

2018-04-01

PSTD (Pseudo Spectral Time Domain) is an excellent model for the light scattering simulation of nonspherical aerosol particles. However, due to the particularity of its discretization form of the Maxwell's equations, the traditional Total Field/Scattering Field (TF/SF) technique for FDTD (Finite Differential Time Domain) is not applicable to PSTD, and the time-consuming pure scattering field technique is mainly applied to introduce the incident wave. To this end, the weighted TF/SF technique proposed by X. Gao is generalized and applied to the 3D-PSTD scattering model. Using this technique, the incident light can be effectively introduced by modifying the electromagnetic components in an inserted connecting region between the total field and the scattering field region with incident terms, where the incident terms are obtained by weighting the incident field by a window function. To optimally determine the thickness of connection region and the window function type for PSTD calculations, their influence on the modeling accuracy is firstly analyzed. To further verify the effectiveness and advantages of the weighted TF/SF technique, the improved PSTD model is validated against the PSTD model equipped with pure scattering field technique in both calculation accuracy and efficiency. The results show that, the performance of PSTD seems to be not sensitive to variation of window functions. The number of the connection layer required decreases with the increasing of spatial resolution, where for spatial resolution of 24 grids per wavelength, a 6-layer region is thick enough. The scattering phase matrices and integral scattering parameters obtained by the improved PSTD show an excellent consistency with those well-tested models for spherical and nonspherical particles, illustrating that the weighted TF/SF technique can introduce the incident precisely. The weighted TF/SF technique shows higher computational efficiency than pure scattering technique.

Effect of weight loss on the cardiovascular risk profile of obese patients with psoriasis

DEFF Research Database (Denmark)

Jensen, Peter; Zachariae, Claus; Christensen, Robin

2014-01-01

Psoriasis is associated with obesity and other cardiovascular risk factors including endothelial dysfunction. We aimed to investigate the effects of weight loss on the cardiovascular risk profile of obese patients with psoriasis. A randomised controlled study was conducted in which we measured...... the microvascular endothelial function with peripheral arterial tonometry (PAT), selected plasma markers of endothelial function, and traditional cardiovascular risk factors in 60 obese patients with psoriasis. The participants were randomised to either low-energy diet (n = 30) providing 800-1,000 kcal/day for 8...... weeks followed by 8 weeks of reduced food intake reaching 1,200 kcal/day or normal healthy foods (n = 30) for 16 weeks. The intervention group lost significantly more weight than controls, which resulted in significant reductions of diastolic blood pressure, resting heart rate, total cholesterol, VLDL...

A Conceptual Design of Light-weighted Mobile Robot for the Integrity of SG Tubes in NPP

Energy Technology Data Exchange (ETDEWEB)

Seo, Yong Chil; Jeong, Kyung Min; Shin, Ho Chul; Lee, Sung Uk; Cho, Jae Wan; Choi, Young Soo; Kim, Seung Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Shin, Chun Sup; Park, Ki Tae [Korea Plant Serviceand Engineering, Busan (Korea, Republic of)

2010-10-15

Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water. It is because that any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulatory. In-service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal of SG chambers limits free access of human worker, remote manipulators are required. In South Korea, Manipulators such as the Zetec SM series and the Westinghouse ROSA series have been used. Such manipulators are rigidly mounted to manways or tube sheets of SG. Confusions for the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and it leads to the increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light-weighed mobile robots have been introduced by Westinghouse and Zetec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam-locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidently, they can be fall down and light repair works can be performed. This paper provides the design results for a light weighted mobile robot which is recently being developed in cooperation of our institutes

A Conceptual Design of Light-weighted Mobile Robot for the Integrity of SG Tubes in NPP

International Nuclear Information System (INIS)

Seo, Yong Chil; Jeong, Kyung Min; Shin, Ho Chul; Lee, Sung Uk; Cho, Jae Wan; Choi, Young Soo; Kim, Seung Ho; Shin, Chun Sup; Park, Ki Tae

2010-01-01

Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water. It is because that any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulatory. In-service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal of SG chambers limits free access of human worker, remote manipulators are required. In South Korea, Manipulators such as the Zetec SM series and the Westinghouse ROSA series have been used. Such manipulators are rigidly mounted to manways or tube sheets of SG. Confusions for the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and it leads to the increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light-weighed mobile robots have been introduced by Westinghouse and Zetec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam-locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidently, they can be fall down and light repair works can be performed. This paper provides the design results for a light weighted mobile robot which is recently being developed in cooperation of our institutes

40 CFR 86.1772-99 - Road load power, test weight, and inertia weight class determination.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Road load power, test weight, and inertia weight class determination. 86.1772-99 Section 86.1772-99 Protection of Environment ENVIRONMENTAL... for Light-Duty Vehicles and Light-Duty Trucks § 86.1772-99 Road load power, test weight, and inertia...

Process Simulation of Resistance Weld Bonding and Automotive Light-weight Materials

DEFF Research Database (Denmark)

Zhang, Wenqi; Chergui, Azeddine; Nielsen, Chris Valentin

of mechanical, electrical, thermal and metallurgical processes, which are essential for simulation of resistance welding process to predict the welding results and evaluate the weldability of materials. These functions have been further extended with new functions for optimization of welding process parameters...... and predicting welding process window, for weld planning with optimal welding parameter settings, and for modeling microstructures and hardness distribution after welding. Latest developments have been made on simulation of resistance welding with nonconductive materials for applications in weld bonding......This paper presents the latest developments in numerical simulation of resistance welding especially with the new functions for simulation of microstructures, weld bonding and spot welding of new light-weight materials. The fundamental functions in SORPAS® are built on coupled modeling...

Implications of fin profiles on overall performance and weight reduction of a fin and tube heat exchanger

DEFF Research Database (Denmark)

Singh, Shobhana; Sørensen, Kim; Simonsen, Anders Schou

2017-01-01

Fin and tube heat exchangers are being used in several industrial applications by means of novel design and optimized performance. Improvements in geometric design may deliver energy efficient and cost-effective heat exchanger performance with reduced weight. In this paper, a systematic study...... on a cross-flow type fin and tube heat exchanger design for a waste heat recovery application is conducted. The geometric profile of the fin is characterized by a dimensionless design variable named aspect ratio which is parametrically varied to obtain different profiles. Two cases, case-I, and case......,000 using computational fluid dynamics. The numerical results obtained for the reference fin profile are verified with the experimental correlations. Dimensionless parameters such as Nusselt number, Euler number, and efficiency index are calculated to predict the overall performance of the heat exchanger...

Light vehicle crash avoidance needs and countermeasure profiles for safety applications based on vehicle-to-vehicle communications

Science.gov (United States)

2013-04-30

This report discusses light-vehicle crash countermeasure profiles and functions for five target pre-crash scenario groups based on vehicle-to-vehicle (V2V) communications. Target pre-crash scenario groups include rear-end, lane change, opposite direc...

EOSCOR: a light weight, microprocessor controlled solar neutron detector

International Nuclear Information System (INIS)

Koga, R.; Albats, P.; Frye, G.M. Jr.; Schindler, S.M.; Denehy, B.V.; Hopper, V.D.; Mace, O.B.

1979-01-01

A light weight high energy neutron detector with vertical detection efficiency of 0.005 at 40 MeV and 1.4 m 2 sensitive area has been developed for long duration super-pressure balloon flight observations of solar neutrons and gamma rays. It consists of two sets of four plastic scintillator hodoscopes separated by a 1 m time-of-flight path to observe n-p, C(n,p), and C(n,d) interactions. The neutron interactions are separated from gamma ray events through TOF measurements. For a large flare, the signal from solar neutrons is expected to be an order of magnitude greater than that of the atmospheric background. The microprocessor controls the data acquisition, accumulation of histograms, and the encoding of data for the telemetry systems. A test flight of the detector was made with a zero-pressure balloon. The expected many-week duration of a super-pressure balloon flight would significantly increase the probability of observing 20-150 MeV neutrons from a medium or large flare. (Auth.)

Ergonomic Evaluation of Space Shuttle Light-Weight Seat Lever Position and Operation

Science.gov (United States)

Maida, J.; Rajulu, Sudhakar L.; Bond, Robert L. (Technical Monitor)

2000-01-01

During a Shuttle flight in the early part of 1999, one of the crewmembers was unable to operate the backrest lever for the light-weight seat in microgravity. It is essential that the crewmembers are able to adjust this back-rest lever, which is titled forward 2 degrees from vertical during launch and then moved backwards to 10 degrees aft of vertical upon reaching orbit. This adjustment is needed to cushion the crewmembers during an inadvertent crash landing situation. The original Shuttle seats, which had seat controls located on the front left and right sides of the seat, were replaced recently with the new light-weight seats. The controls for these new, seats were moved to the night side with one control at the front and the other at the back. While it was uncertain whether the problem encountered was unique to that crewmember or not it was clear to the personnel responsible for maintaining the Shuttle seats that not knowing the cause of the problem posed a safety concern for NASA. Hence the Anthropometry and Biomechanics Facility (ABF) of the Johnson Space Center was requested to perform an evaluation of the seat controls and provide NASA with appropriate recommendations on whether the seat lever positions and operations should be modified. The ABF designed an experiment to investigate the amount of pull force exerted by subjects, wearing an unpressurized or pressurized crew launch escape suit, when controls were placed in the front and back (on the right side) of the light-weight seat. Single-axis load cells were attached to the seat levers, which measured the maximum static pull forces that were exerted by the subjects. Twelve subjects, six male and six female, participated in this study. Each subject was asked to perform the pull test at least three times for each combination of lever position and suit pressure conditions. The results from this study showed that as a whole (or in general), the subjects were able to pull on the lever at the back position with

Light output from six battery operated dental curing lights

Energy Technology Data Exchange (ETDEWEB)

Shimokawa, Carlos Alberto Kenji, E-mail: carlos.shimokawa@usp.br [University of São Paulo, School of Dentistry, Restorative Dentistry, Avenida Professor Lineu Prestes, 2227, 05508-000, São Paulo, São Paulo (Brazil); Dalhousie University, Faculty of Dentistry, Dental Clinical Sciences, 5981 University Avenue, B3H 4R2, Halifax, Nova Scotia (Canada); Turbino, Míriam Lacalle, E-mail: miturbin@usp.br [University of São Paulo, School of Dentistry, Restorative Dentistry, Avenida Professor Lineu Prestes, 2227, 05508-000, São Paulo, São Paulo (Brazil); Harlow, Jessie Eudora, E-mail: jessie.harlow@dal.ca [Dalhousie University, Faculty of Dentistry, Dental Clinical Sciences, 5981 University Avenue, B3H 4R2, Halifax, Nova Scotia (Canada); Price, Hannah Louise, E-mail: hannlprice@gmail.com [Dalhousie University, Faculty of Dentistry, Dental Clinical Sciences, 5981 University Avenue, B3H 4R2, Halifax, Nova Scotia (Canada); Price, Richard Bengt, E-mail: richard.price@dal.ca [Dalhousie University, School of Biomedical Engineering and Faculty of Dentistry, 5981 University Avenue, B3H 4R2, Halifax, Nova Scotia (Canada)

2016-12-01

Light Curing Units (LCUs) are used daily in almost every dental office to photocure resins, but because the light is so bright, the user is unable to tell visually if there are any differences between different LCUs. This study evaluated the light output from six dental LCUs: Elipar Deep Cure-S (3M ESPE), Bluephase G2 (Ivoclar Vivadent), Translux 2Wave (Heraeus Kulzer), Optilight Prime (Gnatus), Slim Blast (First Medica) and Led.B (Guilin Woodpecker) with a fully charged battery, after 50, and again after 100, 20 second light exposures. For each situation, the radiant power was measured 10 times with a laboratory-grade power meter. Then, the emission spectrum was measured using a fiber-optic spectrometer followed by an analysis of the light beam profile. It was found there were significant differences in the LCU power and the irradiance values between the LCUs (p < 0.01). The Optilight Prime and Slim Blast LCUs showed a significant reduction in light output after a 50 and 100 exposures, while Bluephase G2 exhibited a significant reduction only after 100 exposures (p < 0.01). The Bluephase G2 and Translux 2 Wave delivered an emission spectrum that had two distinct wavelength emission peaks. Only the Elipar Deep Cure-S and Bluephase G2 LCUs displayed homogeneous light beam profiles, the other LCUs exhibited highly non-homogeneous light beam profiles. It was concluded that contemporary LCUs could have very different light output characteristics. Both manufacturers and researchers should provide more information about the light output from LCUs. - Highlights: • The six LCUs delivered significantly different light output characteristics. • The use of a single irradiance value does not adequately describe the light output from a curing light. • Small differences in the tip area, or how it is defined, will have a large effect on the calculated irradiance. • In some cases there were large portions of the light tip that emitted less than 400 mW/cm². • The radiant

Light output from six battery operated dental curing lights

International Nuclear Information System (INIS)

Shimokawa, Carlos Alberto Kenji; Turbino, Míriam Lacalle; Harlow, Jessie Eudora; Price, Hannah Louise; Price, Richard Bengt

2016-01-01

Light Curing Units (LCUs) are used daily in almost every dental office to photocure resins, but because the light is so bright, the user is unable to tell visually if there are any differences between different LCUs. This study evaluated the light output from six dental LCUs: Elipar Deep Cure-S (3M ESPE), Bluephase G2 (Ivoclar Vivadent), Translux 2Wave (Heraeus Kulzer), Optilight Prime (Gnatus), Slim Blast (First Medica) and Led.B (Guilin Woodpecker) with a fully charged battery, after 50, and again after 100, 20 second light exposures. For each situation, the radiant power was measured 10 times with a laboratory-grade power meter. Then, the emission spectrum was measured using a fiber-optic spectrometer followed by an analysis of the light beam profile. It was found there were significant differences in the LCU power and the irradiance values between the LCUs (p < 0.01). The Optilight Prime and Slim Blast LCUs showed a significant reduction in light output after a 50 and 100 exposures, while Bluephase G2 exhibited a significant reduction only after 100 exposures (p < 0.01). The Bluephase G2 and Translux 2 Wave delivered an emission spectrum that had two distinct wavelength emission peaks. Only the Elipar Deep Cure-S and Bluephase G2 LCUs displayed homogeneous light beam profiles, the other LCUs exhibited highly non-homogeneous light beam profiles. It was concluded that contemporary LCUs could have very different light output characteristics. Both manufacturers and researchers should provide more information about the light output from LCUs. - Highlights: • The six LCUs delivered significantly different light output characteristics. • The use of a single irradiance value does not adequately describe the light output from a curing light. • Small differences in the tip area, or how it is defined, will have a large effect on the calculated irradiance. • In some cases there were large portions of the light tip that emitted less than 400 mW/cm². • The radiant

Vertically-aligned carbon nanotubes on aluminum as a light-weight positive electrode for lithium-polysulfide batteries.

Science.gov (United States)

Liatard, S; Benhamouda, K; Fournier, A; Ramos, R; Barchasz, C; Dijon, J

2015-05-04

A light-weight, high specific surface current collector made of vertically-aligned carbon nanotubes grown on an aluminum substrate was fabricated and studied as a positive electrode in a semi-liquid lithium/polysulfide battery. This simple system delivered stable capacities over 1000 mA h gS(-1) and 2 mA h cm(-2) with almost no capacity loss over 50 cycles.

From Intensity Profile to Surface Normal: Photometric Stereo for Unknown Light Sources and Isotropic Reflectances.

Science.gov (United States)

Lu, Feng; Matsushita, Yasuyuki; Sato, Imari; Okabe, Takahiro; Sato, Yoichi

2015-10-01

We propose an uncalibrated photometric stereo method that works with general and unknown isotropic reflectances. Our method uses a pixel intensity profile, which is a sequence of radiance intensities recorded at a pixel under unknown varying directional illumination. We show that for general isotropic materials and uniformly distributed light directions, the geodesic distance between intensity profiles is linearly related to the angular difference of their corresponding surface normals, and that the intensity distribution of the intensity profile reveals reflectance properties. Based on these observations, we develop two methods for surface normal estimation; one for a general setting that uses only the recorded intensity profiles, the other for the case where a BRDF database is available while the exact BRDF of the target scene is still unknown. Quantitative and qualitative evaluations are conducted using both synthetic and real-world scenes, which show the state-of-the-art accuracy of smaller than 10 degree without using reference data and 5 degree with reference data for all 100 materials in MERL database.

Effects of supplementary lighting by natural light for growth of Brassica chinensis

Science.gov (United States)

Yeh, Shih-Chuan; Lee, Hui-Ping; Kao, Shih-Tse; Lu, Ju-Lin

2016-04-01

This paper present a model of cultivated chamber with supplementary natural colour light. We investigate the effects of supplementary natural red light and natural blue light on growth of Brassica chinensis under natural white light illumination. After 4 weeks of supplementary colour light treatment, the experiment results shown that the weight of fresh leaf were not affected by supplementary natural blue light. However, those Brassica chinensis were cultivated in the chambers with supplementary natural red light obtained a significant increasing of fresh weight of leaf under both white light illuminate models. The combination of natural white light with supplementary natural red light illumination will be benefits in growth for cultivation and energy saving.

Understanding Xeroderma Pigmentosum Complementation Groups Using Gene Expression Profiling after UV-Light Exposure.

Science.gov (United States)

Bowden, Nikola A; Beveridge, Natalie J; Ashton, Katie A; Baines, Katherine J; Scott, Rodney J

2015-07-14

Children with the recessive genetic disorder Xeroderma Pigmentosum (XP) have extreme sensitivity to UV-light, a 10,000-fold increase in skin cancers from age 2 and rarely live beyond 30 years. There are seven genetic subgroups of XP, which are all resultant of pathogenic mutations in genes in the nucleotide excision repair (NER) pathway and a XP variant resultant of a mutation in translesion synthesis, POLH. The clinical symptoms and severity of the disease is varied across the subgroups, which does not correlate with the functional position of the affected protein in the NER pathway. The aim of this study was to further understand the biology of XP subgroups, particularly those that manifest with neurological symptoms. Whole genome gene expression profiling of fibroblasts from each XP complementation group was assessed before and after UV-light exposure. The biological pathways with altered gene expression after UV-light exposure were distinct for each subtype and contained oncogenic related functions such as perturbation of cell cycle, apoptosis, proliferation and differentiation. Patients from the subgroups XP-B and XP-F were the only subgroups to have transcripts associated with neuronal activity altered after UV-light exposure. This study will assist in furthering our understanding of the different subtypes of XP which will lead to better diagnosis, treatment and management of the disease.

Exploiting the spatial profiles of light

CSIR Research Space (South Africa)

Dudley, Angela L

2017-01-01

Full Text Available We implement digital holograms for the creation and detection of the spatial modes of light. We make use of modal decomposition theory to determine the numerous properties of light, from the modal content of laser beams to decoding the information...

Development of a light weighted mobile robot for SG tube inspection in NPP

International Nuclear Information System (INIS)

Seo, Yong Chil; Jeong, Kyung Min; Shin, Hochul; Gweng, Jung Ju; Lee, Sung Uk; Jeong, Seung Ho; Choi, Young Soo; Kim, Seung Ho; Shin, Chun Sup; Park, Ki Tae

2012-01-01

Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water, because any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulation. In service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal SG chambers limits free access of human workers, remote manipulators are required. In South Korea, Manipulators such as the Zet ec SM series and the Westinghouse ROSA series have bee used. Such manipulators are rigidly mounted to man ways or tube sheets of SG. Confusions of the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and that leads to an increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light weighed mobile robots have been introduced by Westinghouse and Zet ec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidentally, they can be fall down and light repair works can be performed. This paper provides the design results for a lightweight mobile robot which is being developed in cooperation of our institutes

Development of a light weighted mobile robot for SG tube inspection in NPP

Energy Technology Data Exchange (ETDEWEB)

Seo, Yong Chil; Jeong, Kyung Min; Shin, Hochul; Gweng, Jung Ju; Lee, Sung Uk; Jeong, Seung Ho; Choi, Young Soo; Kim, Seung Ho [KAERI, Daejeon (Korea, Republic of); Shin, Chun Sup; Park, Ki Tae [Korea Plant Service and Engineering, Busan (Korea, Republic of)

2012-10-15

Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water, because any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulation. In service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal SG chambers limits free access of human workers, remote manipulators are required. In South Korea, Manipulators such as the Zet ec SM series and the Westinghouse ROSA series have bee used. Such manipulators are rigidly mounted to man ways or tube sheets of SG. Confusions of the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and that leads to an increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light weighed mobile robots have been introduced by Westinghouse and Zet ec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidentally, they can be fall down and light repair works can be performed. This paper provides the design results for a lightweight mobile robot which is being developed in cooperation of our institutes.

Weight reduction of vehicles and light metals; Jidosya no keryoka to keikinzoku zairyo

Energy Technology Data Exchange (ETDEWEB)

Manabe, Akira. [Toyota Motor Corp., Aichi (Japan). Component and System Development Center

1999-08-15

Weight reduction of vehicles (WRV) is a continuous challenge from the beginning of the vehicle history, however the purpose of WRV has been changing by social requirements. Recently automotive industry is facing is facing with the global warmin and the other environmental issues, so we are vast amount of R and D resources to improve the fuel economy. In this paper, the changes of the purpose of WRV and, the relation between fuel economy and WRV, are summarized. And also the current status of light metals usage and the future work for the related material issues, in particuar the corrosion resistance, are brifly mentioned. (author)

Perfil sensorial de iogurte light, sabor pêssego Sensory profile of peach flavored light yogurt

Directory of Open Access Journals (Sweden)

Ligia R. R. Santana

2006-09-01

Full Text Available Foi determinado o perfil sensorial descritivo de três amostras de iogurte light, sabor pêssego, pela metodologia fundamentada na Análise Descritiva Quantitativa (ADQ. A equipe sensorial definiu os termos descritores, os materiais de referência para o treinamento das qualidades e quantificações de cada um dos termos e a ficha de avaliação das amostras, de forma consensual. Dez provadores foram selecionados e rigorosamente treinados para compor a equipe definitiva, utilizando-se como critérios o poder discriminativo, reprodutibilidade e consenso dos provadores entre si. Foram gerados doze termos descritores pelo método de rede. A intensidade de cada descritor foi avaliada em cada amostra por escala não estruturada de nove centímetros, com termos de intensidade ancorados em seus extremos, sendo o mínimo à esquerda e o máximo à direita. Os dados foram analisados por ANOVA, Teste de Tukey e Análise de Componentes Principais (ACP. Os resultados indicaram que as amostras comerciais apresentaram grande variação em seus perfis sensoriais. Na ACP, ficou evidenciado que a amostra A foi caracterizada principalmente pelos atributos gosto doce, sabor pêssego e firmeza dos pedaços de fruta. A amostra B foi caracterizada pelos atributos brilho, cor pêssego e cremosidade, e a amostra C foi caracterizada pela maior intensidade dos atributos gosto ácido, adstringência, textura farinácea e aroma artificial de pêssego. De acordo com o teste de aceitação, todas as amostras apresentaram boa aceitação em todos os atributos avaliados. Desta maneira, a análise do perfil sensorial da amostra C, que contém proteína de soja na sua formulação, revelou que este ingrediente não foi percebido pelos provadores, e não interferiu na sua aceitação.The descriptive terminology and sensory profile of three samples of peach flavored light yogurt were determined using methodology based on the Quantitative Descriptive Analysis (QDA. A sensory panel

The effects of weighted skates on ice-skating kinematics, kinetics and muscular activity.

Science.gov (United States)

Mavor, Matthew P; Hay, Dean C; Graham, Ryan B

2018-07-01

Sport-specific resistance training, through limb loading, can be a complimentary training method to traditional resistance training by loading the working muscles during all phases of a specific movement. The purpose of this study was to examine the acute effects of skating with an additional load on the skate, using a skate weight prototype, on kinematics, kinetics, and muscle activation during the acceleration phase while skating on a synthetic ice surface. 10 male hockey skaters accelerated from rest (standing erect with knees slightly bent) under four non-randomized load conditions: baseline 1 (no weight), light (0.9 kg per skate), heavy (1.8 kg per skate), and baseline 2 (no weight). Skating with additional weight caused athletes to skate slower (p skates decreased skating velocity, but athletes maintained similar muscle activation profiles (magnitude and trends) with minor changes to their skating kinematics.

Extra Heat Loss Through Light Weight Roofs Due to Latent Heat

DEFF Research Database (Denmark)

Rode, Carsten

1996-01-01

that changes phase at the terminals of its passage.Note however, that convection of air most often will have an important effect on the overall heat flow - but that is a different topic.Macroscopic latent heat transferConsider the following scenario: Initially, moisture is present in its condensed or frozen......This report is one in a series of papers in Task 5 of IEA Annex 24 on how moisture and air movements affect the energy performance of building constructions. The effect of latent heat flow will be demonstrated by means of an example: a light weight flat roof.Latent heat flow is one of three...... processes by which moisture affects energy performance:Higher thermal conductivityMoist materials have higher thermal con-ductivity than when they are dry. This is because thermally conducting moisture replaces the better insulating air in the pores of the materials. Moisture also enhan-ces the thermal...

An Innovative Approach To Making Ultra Light Weight Wind Turbine Blades

Directory of Open Access Journals (Sweden)

Suhail Zaki Farooqui

2012-04-01

Full Text Available An innovative mould free method for the fabrication of ultimate light weight small wind turbine blades made out of composites has been suggested in this paper. The method has been practically applied with very satisfactory results. The method is low cost and is specifically suitable for individual small wind turbine makers. The airfoils used are simple to shape and possess good Cl/Cd characteristics. The blades are crafted using galvanized iron sheets, aluminum pipes, hard paper and fiberglass. A computer program is included with tip correction features to design the blades at the required power rating, wind speed, tip speed ratio and the chosen constant angle of attack. Results of the program run for designing 250 and 500 watt wind turbine blades at 8 m/s wind speed and tip speed ratios of 5.5 are tabulated. Performance results of the blades thus produced are also discussed.

LIGHT-WEIGHT LOAD-BEARING STRUCTURES REINFORCED BY CORE ELEMENTS MADE OF SEGMENTS AND A METHOD OF CASTING SUCH STRUCTURES

DEFF Research Database (Denmark)

2009-01-01

The invention relates to a light-weight load-bearing structure, reinforced by core elements (2) of a strong material constituting one or more compression or tension zones in the structure to be cast, which core (2) is surrounded by or adjacent to a material of less strength compared to the core (2......), where the core (2) is constructed from segments (1) of core elements (2) assembled by means of one or more prestressing elements (4). The invention further relates to a method of casting of light-weight load-bearing structures, reinforced by core elements (2) of a strong material constituting one...... or more compression or tension zones in the structure to be cast, which core (2) is surrounded by or adjacent to a material of less strength compared to the core (2), where the core (2) is constructed from segments (1) of core elements (2) assembled and hold together by means of one or more prestressing...

Green light drives leaf photosynthesis more efficiently than red light in strong white light: revisiting the enigmatic question of why leaves are green.

Science.gov (United States)

Terashima, Ichiro; Fujita, Takashi; Inoue, Takeshi; Chow, Wah Soon; Oguchi, Riichi

2009-04-01

The literature and our present examinations indicate that the intra-leaf light absorption profile is in most cases steeper than the photosynthetic capacity profile. In strong white light, therefore, the quantum yield of photosynthesis would be lower in the upper chloroplasts, located near the illuminated surface, than that in the lower chloroplasts. Because green light can penetrate further into the leaf than red or blue light, in strong white light, any additional green light absorbed by the lower chloroplasts would increase leaf photosynthesis to a greater extent than would additional red or blue light. Based on the assessment of effects of the additional monochromatic light on leaf photosynthesis, we developed the differential quantum yield method that quantifies efficiency of any monochromatic light in white light. Application of this method to sunflower leaves clearly showed that, in moderate to strong white light, green light drove photosynthesis more effectively than red light. The green leaf should have a considerable volume of chloroplasts to accommodate the inefficient carboxylation enzyme, Rubisco, and deliver appropriate light to all the chloroplasts. By using chlorophylls that absorb green light weakly, modifying mesophyll structure and adjusting the Rubisco/chlorophyll ratio, the leaf appears to satisfy two somewhat conflicting requirements: to increase the absorptance of photosynthetically active radiation, and to drive photosynthesis efficiently in all the chloroplasts. We also discuss some serious problems that are caused by neglecting these intra-leaf profiles when estimating whole leaf electron transport rates and assessing photoinhibition by fluorescence techniques.

Using OAI and other light-weight protocols to facilitate scholarly communication

CERN Multimedia

CERN. Geneva

2005-01-01

This presentation describes how we share and harvest sets of various OAI metadata, repurpose it through the Ockham Library Network, and demonstrate an alternative to traditional scholarly communication. The Ockham Library Network is a sponsored National Science Foundation Digital Library grant with co-PI's at Emory University, Virginia Tech, Oregon State University, and the University of Notre Dame. One of the purposes of Ockham is to exploit modular, light-weight protocols (such as OAI-PMH and SRW/U) into systems for learning, teaching, and scholarship. To date we have implemented a number of such services: * Ockham Digital Library Services Registry - A distributed directory of digital library services, collections, and agents. The contents of the Registry are described using the same XML schema articulated by the Information Environment Service Registry (IESR), and the records are shared among participating institutions on a peer-to-peer network utilizing OAI to propagate registry records amongst the distri...

Gradient Weight in Phonology

Science.gov (United States)

Ryan, Kevin Michael

2011-01-01

Research on syllable weight in generative phonology has focused almost exclusively on systems in which weight is treated as an ordinal hierarchy of clearly delineated categories (e.g. light and heavy). As I discuss, canonical weight-sensitive phenomena in phonology, including quantitative meter and quantity-sensitive stress, can also treat weight…

Rapid Analysis of Apolar Low Molecular Weight Constituents in Wood Using High Pressure Liquid Chromatography with Evaporative Light Scattering Detection

NARCIS (Netherlands)

Claassen, F.W.; Haar, van de C.; Beek, van T.A.; Dorado, J.; Martinez-Inigo, M.; Sierra-Alvarez, R.

2000-01-01

A new high pressure liquid chromatographic method with evaporative light scattering detection was developed for the qualitative and quantitative analysis of apolar, low molecular weight constituents in wood. The wood extractives were obtained by means of a 6 h Soxhlet extraction with acetone. The

The importance of being light: aerodynamic forces and weight in ski jumping.

Science.gov (United States)

Schmölzer, B; Müller, W

2002-08-01

Many contemporary world class ski jumpers are alarmingly underweight and several cases of anorexia nervosa have come to light. Athletes strive for low body weight because it gives them a major competitive advantage. In order to stop this hazardous development, changes to the regulations are being discussed, and the International Ski Federation and the International Olympic Committee wish to be proactive in safe guarding the interest of the athletes and their health. This study of ski jumping uses field studies conducted during World Cup competitions, large-scale wind tunnel measurements with 1:1 models of ski jumpers in current equipment and highly accurate computer simulations of the flight phase that include the effects due to the athlete's position changes. Particular attention has been directed to the design of a reference jump that mirrors current flight style and equipment regulations (2001), and to the investigation of effects associated with variation in body mass, air density, and wind gusts during the simulated flight. The detailed analysis of the physics of ski jumping described here can be used for the investigation of all initial value and parameter variations that determine the flight path of a ski jumper and will form a reliable basis for setting regulations that will make it less attractive or even disadvantageous for the athlete to be extremely light.

A light weight secure image encryption scheme based on chaos & DNA computing

Directory of Open Access Journals (Sweden)

Bhaskar Mondal

2017-10-01

Full Text Available This paper proposed a new light weight secure cryptographic scheme for secure image communication. In this scheme the plain image is permuted first using a sequence of pseudo random number (PRN and encrypted by DeoxyriboNucleic Acid (DNA computation. Two PRN sequences are generated by a Pseudo Random Number Generator (PRNG based on cross coupled chaotic logistic map using two sets of keys. The first PRN sequence is used for permuting the plain image whereas the second PRN sequence is used for generating random DNA sequence. The number of rounds of permutation and encryption may be variable to increase security. The scheme is proposed for gray label images but the scheme may be extended for color images and text data. Simulation results exhibit that the proposed scheme can defy any kind of attack.

Effect of light intensity on ovarian gene expression, reproductive performance and body weight of rabbit does.

Science.gov (United States)

Sun, Liangzhan; Wu, Zhenyu; Li, Fuchang; Liu, Lei; Li, Jinglin; Zhang, Di; Sun, Chaoran

2017-08-01

The objective of the experiment was to find the minimum light intensity which could improve reproduction by examining its effect on ovarian gene expression, reproductive performance and body weight of rabbit does with three different light intensities: 60 (L), 80 (M), and 100 (H)lx. A total of 144 Rex-rabbits submitted to a 49-day reproductive regimen were used in this study. Ovaries were collected and relative abundance of mRNA for ovarian proteins of interest was examined with real-time PCR. Amount of protein for proteins of interest was examined by immunohistochemistry. Reproductive performance and doe bodyweight of the first three consecutive reproductive periods after initiation of the light intensity treatments were evaluated. The results provided evidence that light intensity had no effect on relative abundance of estradiol receptor-α (ER-α), follicle stimulating hormone receptor (FSHR), luteinizing hormone receptor (LHR), gonadotropin releasing hormone receptor 1 (GnRHR1) and progesterone receptor (PGR) mRNA. The relative abundance of growth hormone receptor (GHR) mRNA was, however, greater in Group L than M and H (Plight intensities (P>0.05). The bodyweight of the does in Group L was greater than the other two groups at first insemination, second insemination and the second postpartum period (P0.05). These observations suggest that light intensity between 60 and 100lx has no effect on the reproductive performance of rabbit does, however, the amounts of GHR mRNA and growth hormone (GH) protein were affected and the greater light intensity had a negative effect on bodyweight between the time of the first insemination and the second partum period. Copyright © 2017 Elsevier B.V. All rights reserved.

Kinome profiling reveals an interaction between jasmonate, salicylate and light control of hyponastic petiole growth in Arabidopsis thaliana.

Directory of Open Access Journals (Sweden)

Tita Ritsema

Full Text Available Plants defend themselves against infection by biotic attackers by producing distinct phytohormones. Especially jasmonic acid (JA and salicylic acid (SA are well known defense-inducing hormones. Here, the effects of MeJA and SA on the Arabidopsis thaliana kinome were monitored using PepChip arrays containing kinase substrate peptides to analyze posttranslational interactions in MeJA and SA signaling pathways and to test if kinome profiling can provide leads to predict posttranslational events in plant signaling. MeJA and SA mediate differential phosphorylation of substrates for many kinase families. Also some plant specific substrates were differentially phosphorylated, including peptides derived from Phytochrome A, and Photosystem II D protein. This indicates that MeJA and SA mediate cross-talk between defense signaling and light responses. We tested the predicted effects of MeJA and SA using light-mediated upward leaf movement (differential petiole growth also called hyponastic growth. We found that MeJA, infestation by the JA-inducing insect herbivore Pieris rapae, and SA suppressed low light-induced hyponastic growth. MeJA and SA acted in a synergistic fashion via two (partially divergent signaling routes. This work demonstrates that kinome profiling using PepChip arrays can be a valuable complementary ∼omics tool to give directions towards predicting behavior of organisms after a given stimulus and can be used to obtain leads for physiological relevant phenomena in planta.

Design and Implementation of a Smart LED Lighting System Using a Self Adaptive Weighted Data Fusion Algorithm

Directory of Open Access Journals (Sweden)

Wen-Tsai Sung

2013-12-01

Full Text Available This work aims to develop a smart LED lighting system, which is remotely controlled by Android apps via handheld devices, e.g., smartphones, tablets, and so forth. The status of energy use is reflected by readings displayed on a handheld device, and it is treated as a criterion in the lighting mode design of a system. A multimeter, a wireless light dimmer, an IR learning remote module, etc. are connected to a server by means of RS 232/485 and a human computer interface on a touch screen. The wireless data communication is designed to operate in compliance with the ZigBee standard, and signal processing on sensed data is made through a self adaptive weighted data fusion algorithm. A low variation in data fusion together with a high stability is experimentally demonstrated in this work. The wireless light dimmer as well as the IR learning remote module can be instructed directly by command given on the human computer interface, and the reading on a multimeter can be displayed thereon via the server. This proposed smart LED lighting system can be remotely controlled and self learning mode can be enabled by a single handheld device via WiFi transmission. Hence, this proposal is validated as an approach to power monitoring for home appliances, and is demonstrated as a digital home network in consideration of energy efficiency.

Design and Implementation of a Smart LED Lighting System Using a Self Adaptive Weighted Data Fusion Algorithm

Science.gov (United States)

Sung, Wen-Tsai; Lin, Jia-Syun

2013-01-01

This work aims to develop a smart LED lighting system, which is remotely controlled by Android apps via handheld devices, e.g., smartphones, tablets, and so forth. The status of energy use is reflected by readings displayed on a handheld device, and it is treated as a criterion in the lighting mode design of a system. A multimeter, a wireless light dimmer, an IR learning remote module, etc. are connected to a server by means of RS 232/485 and a human computer interface on a touch screen. The wireless data communication is designed to operate in compliance with the ZigBee standard, and signal processing on sensed data is made through a self adaptive weighted data fusion algorithm. A low variation in data fusion together with a high stability is experimentally demonstrated in this work. The wireless light dimmer as well as the IR learning remote module can be instructed directly by command given on the human computer interface, and the reading on a multimeter can be displayed thereon via the server. This proposed smart LED lighting system can be remotely controlled and self learning mode can be enabled by a single handheld device via WiFi transmission. Hence, this proposal is validated as an approach to power monitoring for home appliances, and is demonstrated as a digital home network in consideration of energy efficiency.

Influence of pre-pregnancy leisure time physical activity on gestational and postpartum weight gain and birth weight - a cohort study.

Science.gov (United States)

Hegaard, Hanne Kristine; Rode, Line; Katballe, Malene Kjær; Langberg, Henning; Ottesen, Bent; Damm, Peter

2017-08-01

In order to examine the association between pre-pregnancy leisure time physical activities and gestational weight gain, postpartum weight gain and birth weight, we analysed prospectively collected data from 1827 women with singleton term pregnancies. Women were categorised in groups of sedentary women, light exercisers, moderate exercisers and competitive athletes. The results showed that sedentary women on average gained 14.1 kg during pregnancy, whereas light exercisers gained 13.7 kg, moderate exercisers gained 14.3 kg and competitive athletes 16.1 kg. Competitive athletes had an increased risk of having a gestational weight gain above Institute of Medicine (IOM) recommendations with an odds ratio of 2.60 (1.32-5.15) compared to light exercisers. However, birth weight and one year postpartum weight was similar for all four groups. Thus, although competitive athletes gain more weight than recommended during pregnancy, this may not affect birth weight or postpartum weight. Impact statement What is already known on this subjectPrevious studies have found that increased pre-pregnancy physical activity is associated with lower gestational weight gain during the last trimester, but showed no association between the pre-pregnancy level of physical activity and mean birth weight. What the results of this study addWe found that women classified as competitive exercisers had a 2.6-fold increased risk of gaining more weight than recommended compared to light exercisers. Nearly 6 out of 10 women among the competitive exercisers gained more weight than recommended by IOM. Surprisingly, this did not appear to increase birth weight or post-partum weight gain, but other adverse effects cannot be excluded. What the implications are of these findings for clinical practice and/or further researchIn the clinical practice it may be relevant to focus on and advise pre-pregnancy competitive exercisers in order to prevent excessive gestational weight gain.

A Comparative Study of the Analysis, Numerical Modelling and Experimental Test on a Sandwich Panel with Plane and Profiled Facings

Directory of Open Access Journals (Sweden)

Raluca Hohan

2010-01-01

Full Text Available Sandwich panels are remarkable products because they can be as strong as a solid material but with less weight. The analysis that is required to predict the stresses and deflections in panels with flat or lightly profiled facings is that of conventional beam theory but with the addition of shear deformation. Knowing that the profiled sheets bring an increase of the flexural stiffness, formulas showing the calculus of a panel with flat and profiled facings are established. A comparison between the results of a mathematical calculus, an experimental test and a numerical modelling is provided.

Histogram Profiling of Postcontrast T1-Weighted MRI Gives Valuable Insights into Tumor Biology and Enables Prediction of Growth Kinetics and Prognosis in Meningiomas.

Science.gov (United States)

Gihr, Georg Alexander; Horvath-Rizea, Diana; Kohlhof-Meinecke, Patricia; Ganslandt, Oliver; Henkes, Hans; Richter, Cindy; Hoffmann, Karl-Titus; Surov, Alexey; Schob, Stefan

2018-06-14

Meningiomas are the most frequently diagnosed intracranial masses, oftentimes requiring surgery. Especially procedure-related morbidity can be substantial, particularly in elderly patients. Hence, reliable imaging modalities enabling pretherapeutic prediction of tumor grade, growth kinetic, realistic prognosis, and-as a consequence-necessity of surgery are of great value. In this context, a promising diagnostic approach is advanced analysis of magnetic resonance imaging data. Therefore, our study investigated whether histogram profiling of routinely acquired postcontrast T1-weighted images is capable of separating low-grade from high-grade lesions and whether histogram parameters reflect Ki-67 expression in meningiomas. Pretreatment T1-weighted postcontrast volumes of 44 meningioma patients were used for signal intensity histogram profiling. WHO grade, tumor volume, and Ki-67 expression were evaluated. Comparative and correlative statistics investigating the association between histogram profile parameters and neuropathology were performed. None of the investigated histogram parameters revealed significant differences between low-grade and high-grade meningiomas. However, significant correlations were identified between Ki-67 and the histogram parameters skewness and entropy as well as between entropy and tumor volume. Contrary to previously reported findings, pretherapeutic postcontrast T1-weighted images can be used to predict growth kinetics in meningiomas if whole tumor histogram analysis is employed. However, no differences between distinct WHO grades were identifiable in out cohort. As a consequence, histogram analysis of postcontrast T1-weighted images is a promising approach to obtain quantitative in vivo biomarkers reflecting the proliferative potential in meningiomas. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

A Remote Sensing Approach to Estimate Vertical Profile Classes of Phytoplankton in a Eutrophic Lake

Directory of Open Access Journals (Sweden)

Kun Xue

2015-10-01

Full Text Available The extension and frequency of algal blooms in surface waters can be monitored using remote sensing techniques, yet knowledge of their vertical distribution is fundamental to determine total phytoplankton biomass and understanding temporal variability of surface conditions and the underwater light field. However, different vertical distribution classes of phytoplankton may occur in complex inland lakes. Identification of the vertical profile classes of phytoplankton becomes the key and first step to estimate its vertical profile. The vertical distribution profile of phytoplankton is based on a weighted integral of reflected light from all depths and is difficult to determine by reflectance data alone. In this study, four Chla vertical profile classes (vertically uniform, Gaussian, exponential and hyperbolic were found to occur in three in situ vertical surveys (28 May, 19–24 July and 10–12 October in a shallow eutrophic lake, Lake Chaohu. We developed and validated a classification and regression tree (CART to determine vertical phytoplankton biomass profile classes. This was based on an algal bloom index (Normalized Difference algal Bloom Index, NDBI applied to both in situ remote sensing reflectance (Rrs and MODIS Rayleigh-corrected reflectance (Rrc data in combination with data of local wind speed. The results show the potential of retrieving Chla vertical profiles information from integrated information sources following a decision tree approach.

Improving “color rendering” of LED lighting for the growth of lettuce

Science.gov (United States)

Han, Tao; Vaganov, Vitaliy; Cao, Shixiu; Li, Qiang; Ling, Lili; Cheng, Xiaoyao; Peng, Lingling; Zhang, Congzhi; Yakovlev, Alexey N.; Zhong, Yang; Tu, Mingjing

2017-04-01

Light plays a vital role on the growth and development of plant. On the base of white light with high color rendering to the benefit of human survival and life, we proposed to improve “color rendering” of LED lighting for accelerating the growth of lettuce. Seven spectral LED lights were adopted to irradiate the lettuces under 150 μmol·m-2·s-1 for a 16 hd-1 photoperiod. The leaf area and number profiles, plant biomass, and photosynthetic rate under the as-prepared LED light treatments were investigated. We let the absorption spectrum of fresh leaf be the emission spectrum of ideal light and then evaluate the “color rendering” of as-prepared LED lights by the Pearson product-moment correlation coefficient and CIE chromaticity coordinates. Under the irradiation of red-yellow-blue light with high correlation coefficient of 0.587, the dry weights and leaf growth rate are 2-3 times as high as the sharp red-blue light. The optimized LED light for lettuce growth can be presumed to be limited to the angle (about 75°) between the vectors passed through the ideal light in the CIE chromaticity coordinates. These findings open up a new idea to assess and find the optimized LED light for plant growth.

Long-term effect of dexfenfluramine on amino acid profiles and food selection in obese patients during weight loss

DEFF Research Database (Denmark)

Breum, L.; Møller, S.-E.; Andersen, T.

1996-01-01

In depressive disorders an association between basal pre-treatment plasma ratios of tryptophan (Trp) and tyrosine (Tyr) to other large neutral amino acids (LNAA) and the clinical efficacy of serotonergic acting drugs have been established. In order to clarify whether a similar relation exists...... in obesity and to elucidate the long-term effect of dexfenfluramine (dF) on plasma amino acid profiles and macronutrient selection, we examined 29 obese patients participating in a 12 months double-blind weight loss trial with either dexfenfluramine (dF) (30 mg/day) or placebo (PL) in conjunction with 4...... groups. Macronutrient selection was not affected by the dF treatment. In the placebo group weight loss was associated with a high pre-treatment energy intake and a high carbohydrate-protein ratio (p

Impaired fasting glucose and the metabolic profile in Danish children and adolescents with normal weight, overweight, or obesity

DEFF Research Database (Denmark)

Kloppenborg, Julie T; Fonvig, Cilius E; Nielsen, Tenna R H

2017-01-01

OBJECTIVE: Whether the definitions of impaired fasting glucose (IFG) from the American Diabetes Association (ADA) and the World Health Organization (WHO) differentially impact estimates of the metabolic profile and IFG-related comorbidities in Danish children and adolescents is unknown. METHODS......: Two thousand one hundred and fifty four (979 boys) children and adolescents with overweight or obesity (median age 12 years) and 1824 (728 boys) children with normal weight (median age 12 years) from The Danish Childhood Obesity Biobank were studied. Anthropometrics, blood pressure, puberty......, and fasting concentrations of glucose, insulin, glycosylated hemoglobin (HbA1c), and lipids were measured. RESULTS: About 14.1% of participants with overweight or obesity exhibited IFG according to the ADA and 3.5% according to the WHO definition. Among individuals with normal weight, the corresponding...

Exercise Training and Grape Seed Extract Co-Administration Improves Lipid Profile, Weight Loss, Bradycardia, and Hypotension of STZ-Induced Diabetic Rats

Directory of Open Access Journals (Sweden)

Mohammad Badavi

2013-12-01

Full Text Available Background:: Exercise Training (ET and Grape Seed Extract (GSE as an antioxidant have many positive effects on controlling diabetes mellitus and its complications. Objectives:: This study aimed to determine the effects of GSE alone or combined with ET on body weight, plasma lipid profile, blood pressure, and heart rate in STZ-induced diabetic rats. Methods:: In this study, male Wistar rats were randomly assigned to five groups: sedentary control, sedentary diabetic, trained diabetic, GSE treated sedentary diabetic, and GSE treated trained diabetic. ET was conducted on the treadmill daily for 8 weeks. One way ANOVA followed by LSD test was used for statistical analysis. Results:: Reduction of body weight, high density lipoproteins, heart rate, and systolic blood pressure and increment of total cholesterol, triglyceride, low density lipoprotein, and very low density lipoproteins were observed after STZ injection. Co-administration of GSE and ET had more positive effects on lipid profile compared to each method alone. In addition, GSE and ET modified heart rate partially, while their combination was more effective in improvement of heart rat in conscious rats. On the other hand, administration of ET or GSE alone did not affect systolic blood pressure and body weight, while their combination restored systolic blood pressure completely and improved body weight partially. Conclusions:: The study findings indicated that ET combined with GSE had more beneficial effects compared to each one alone on the complications of STZ induced diabetes. This may constitute a convenient and inexpensive therapeutic approach to diabetic complications.

The Effects of 6 Isocaloric Meals on Body Weight, Lipid Profiles, Leptin, and Adiponectin in Overweight Subjects (BMI > 25).

Science.gov (United States)

Hatami Zargaran, Zeynab; Salehi, Moosa; Heydari, Seyed Taghi; Babajafari, Siavash

2014-04-01

It seems that meal frequency is negatively related to body weight, but the relationship between meal frequency and weight loss is not clearly known yet. The present study aimed to investigate whether 6 isocaloric meals affected body weight, lipid profiles, leptin, and adiponectin in overweight subjects. The present randomized controlled trial was conducted on 90 overweight subjects in 3 months. The subjects were randomly divided into two groups. The control group continued their normal diet, while the intervention group was required to follow a 6 isocaloric meal diet instead of their previous meal pattern (3 meals and 2 snacks). The planned reduced calorie diets for both groups were identical, except for meal pattern. Blood samples were analyzed prior to and at the end of the study for total cholesterol, triglyceride, HDL-C, LDL-C, leptin, and adiponectinn concentrations. Paired t-test was used for comparison of the measurements before and after the study in each group. Besides, independent t-test was used for comparison of the measurements between the groups. P value less than 0.05 was considered as statistically significant. The mean age of the participants was 36.38 ± 9.7 in the intervention group and 37.6 ± 10.9 in the control group. In comparison to the control group, the intervention group showed a significant decrease in total cholesterol (P meal pattern led to a reduction in BMI, lipid profiles (total cholesterol, LDL-C, triglyceride), and leptin concentrations and an increase in HDL and adiponectin compared to the normal diet.

On the mean profiles of radio pulsars - II. Reconstruction of complex pulsar light curves and other new propagation effects

Science.gov (United States)

Hakobyan, H. L.; Beskin, V. S.; Philippov, A. A.

2017-08-01

Our previous paper outlined the general aspects of the theory of radio light curve and polarization formation for pulsars. We predicted the one-to-one correspondence between the tilt of the linear polarization position angle of the the circular polarization. However, some of the radio pulsars indicate a clear deviation from that correlation. In this paper, we apply the theory of the radio wave propagation in the pulsar magnetosphere for the analysis of individual effects leading to these deviations. We show that within our theory the circular polarization of a given mode can switch its sign, without the need to introduce a new radiation mode or other effects. Moreover, we show that the generation of different emission modes on different altitudes can explain pulsars, that presumably have the X-O-X light-curve pattern, different from what we predict. General properties of radio emission within our propagation theory are also discussed. In particular, we calculate the intensity patterns for different radiation altitudes and present light curves for different observer viewing angles. In this context we also study the light curves and polarization profiles for pulsars with interpulses. Further, we explain the characteristic width of the position angle curves by introducing the concept of a wide emitting region. Another important feature of radio polarization profiles is the shift of the position angle from the centre, which in some cases demonstrates a weak dependence on the observation frequency. Here we demonstrate that propagation effects do not necessarily imply a significant frequency-dependent change of the position angle curve.

Effects of the dietary amount and source of protein, resistance training and anabolic-androgenic steroids on body weight and lipid profile of rats.

Science.gov (United States)

Aparicio, V A; Sánchez, C; Ortega, F B; Nebot, E; Kapravelou, G; Porres, J M; Aranda, P

2013-01-01

Dietary protein amount and source, hypertrophy resistance training (RT) and anabolicandrogenic steroids (AAS) may affect body weight and plasma and hepatic lipid profile. 157 adult male Wistar rats were randomly distributed in 16 experimental groups resulting in: normal-protein (NP) or high-protein (HP) diets, whey or soy-protein diets, with or without RT and with or without AAS, for 3 months. Final body weight was lower in the RT and AAS groups compared to sedentary and non- AAS groups, respectively (all, pweight of rats that performed RT or ingested a HP diet (all, p<0.05). HDL-cholesterol was higher when RT was combined with HP diets (p=0.010) or non-AAS and when HP diets were combined with non-AAS (both,p<0.001). Groups that combined RT with non-AAS administration obtained the lowest hepatic TAG (p<0.05). Among all the interventions tested, AAS was the factor that most negatively affected plasma and hepatic lipid profile, whereas HP diets and RT could benefit lipid profile, especially when combined. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

PROFIL BIOKIMIA DARAH PEKERJA LAKI-LAKI DENGAN KATEGORI RINGAN DAN BERAT

Directory of Open Access Journals (Sweden)

Yuniar Rosmalina

2012-11-01

Full Text Available Biochemical Profile of Male Workers According To Hard or Light Works.Background: Various occupations could be categorized as light, moderate and heavy activities as well. Heavy workers by mean those who mainly work based on muscle strength usually received low salary, therefore they have low purchasing power for providing better nutrition, including for adequate energy intake. In contrary for those who work mainly using brain capacity rather than muscle strength usually received higher salary and consumed food with high content of fat. The difference of income could result difference of nutrition intake, even different impact to health/nutrition status and sensitivity to certain diseases as well. The profile of nutritional biochemistry could indicate the health status of people.Objectives: To study the relationship between biochemical profile of worker and different type of work.Methods: The subjects were 43 worker of sandal handicraft considered as light level workers and 44 workers of sand and stone as heavy workers whose met criteria 30-55 years old, physically healthy and agreed to involve in this study. Body composition was measured using anthropometry and blood analysis. Anthropometric measurement was applied including body weight, height, MUAC and skin fold thickness. Blood analysis was hemoglobin, albumin, protein and triglyceride. Nutrient intake was collected by combination weighing and 24 hours recall method for 3 consecutive days. Other data collection includes physical examination by a medical doctor and interview was done to identify their characteristic and socio demografi.Results: The proportion of workers who had serum albumin below normal was higher in heavy worker compared to light worker (56.8% vs. 23.3%. This finding indicated that more than half of hard workers had protein depletion as result of break down protein stores in thebody. The average of serum albumin of light workers was significantly higher compared to heavy

Effect of high-protein or normal-protein diet on weight loss, body composition, hormone, and metabolic profile in southern Brazilian women with polycystic ovary syndrome: a randomized study.

Science.gov (United States)

Toscani, Mariana K; Mario, Fernanda M; Radavelli-Bagatini, Simone; Wiltgen, Denusa; Matos, Maria Cristina; Spritzer, Poli Maria

2011-11-01

The aim of the present study was to assess the effects of a high protein (HP) and a normal protein (NP) diet on patients with polycystic ovary syndrome (PCOS) and body mass index-matched controls in a sample of southern Brazilian women. This 8-week randomized trial was carried out at a university gynecological endocrinology clinic and included 18 patients with PCOS and 22 controls. Changes in weight, body composition, hormone, and metabolic profile were analyzed in women randomized to receive HP (30% protein, 40% carbohydrate, and 30% lipid) or NP (15% protein, 55% carbohydrate, and 30% lipid). The energy content was estimated for each participant at 20-25 kcal/kg current weight/day. Physical activity, blood pressure, homeostasis model assessment (HOMA) index, and fasting and 2-h glucose and insulin remained stable during the intervention in PCOS and controls, even in the presence of weight loss. There were no changes in lipid profile in either group. In contrast, body weight, body mass index (BMI), waist circumference, percent of body fat, and sum of trunk skinfolds decreased significantly after both diets in both groups. Total testosterone also decreased in PCOS and controls regardless of diet. In conclusion, calorie reduction, rather than protein content, seemed to affect body composition and hormonal profile in this short-term study. These findings emphasize the role of non-pharmacological interventions to reduce weight and ameliorate the anthropometric and clinical phenotype in PCOS.

Testing and evaluation of a slot and tab construction technique for light-weight wood-fiber-based structural panels under bending

Science.gov (United States)

Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

2015-01-01

This paper presented construction and strain distributions for light-weight wood-fiber-based structural panels with tri-grid core made from phenolic impregnated laminated paper composites under bending. A new fastening configuration of slots in the faces and tabs on the core was applied to the face/core interfaces of the sandwich panel in addition to epoxy resin. Both...

Whole Tumor Histogram-profiling of Diffusion-Weighted Magnetic Resonance Images Reflects Tumorbiological Features of Primary Central Nervous System Lymphoma.

Science.gov (United States)

Schob, Stefan; Münch, Benno; Dieckow, Julia; Quäschling, Ulf; Hoffmann, Karl-Titus; Richter, Cindy; Garnov, Nikita; Frydrychowicz, Clara; Krause, Matthias; Meyer, Hans-Jonas; Surov, Alexey

2018-04-01

Diffusion weighted imaging (DWI) quantifies motion of hydrogen nuclei in biological tissues and hereby has been used to assess the underlying tissue microarchitecture. Histogram-profiling of DWI provides more detailed information on diffusion characteristics of a lesion than the standardly calculated values of the apparent diffusion coefficient (ADC)-minimum, mean and maximum. Hence, the aim of our study was to investigate, which parameters of histogram-profiling of DWI in primary central nervous system lymphoma can be used to specifically predict features like cellular density, chromatin content and proliferative activity. Pre-treatment ADC maps of 21 PCNSL patients (8 female, 13 male, 28-89 years) from a 1.5T system were used for Matlab-based histogram profiling. Results of histopathology (H&E staining) and immunohistochemistry (Ki-67 expression) were quantified. Correlations between histogram-profiling parameters and neuropathologic examination were calculated using SPSS 23.0. The lower percentiles (p10 and p25) showed significant correlations with structural parameters of the neuropathologic examination (cellular density, chromatin content). The highest percentile, p90, correlated significantly with Ki-67 expression, resembling proliferative activity. Kurtosis of the ADC histogram correlated significantly with cellular density. Histogram-profiling of DWI in PCNSL provides a comprehensible set of parameters, which reflect distinct tumor-architectural and tumor-biological features, and hence, are promising biomarkers for treatment response and prognosis. Copyright © 2018. Published by Elsevier Inc.

Simulation of the Vacuum Assisted Resin Transfer Molding (VARTM) process and the development of light-weight composite bridging

Science.gov (United States)

Robinson, Marc J.

A continued desire for increased mobility in the aftermath of natural disasters, or on the battlefield, has lead to the need for improved light-weight bridging solutions. This research investigates the development of a carbon/epoxy composite bridging system to meet the needs for light-weight bridging. The research focuses on two main topics. The first topic is that of processing composite structures and the second is the design and testing of these structures. In recent years the Vacuum Assisted Resin Transfer Molding (VARTM) process has become recognized as a low-cost manufacturing alternative for large Fiber Reinforced Polymer (FRP) composite structures for civil, military, and aerospace applications. The success of the VARTM process (complete wet-out) is very sensitive to the resin injection strategy used and the proper placement of flow distribution materials and inlet and vacuum ports. Predicting the flow front pattern, the time required for infusing a part with resin, and the time required to bleed excess resin at the end of filling, is critical to ensure that the part will become completely impregnated and desired fiber volume fractions achieved prior to the resin gelling (initiation of cure). In order to eliminate costly trial and error experiments to determine the optimal infusion strategy, this research presents a simulation model which considers in-plane flow as well as flow through the thickness of the preform. In addition to resin filling, the current model is able to simulate the bleeding of resin at the end of filling to predict the required bleeding time to reach desired fiber volume fractions for the final part. In addition to processing, the second portion of the dissertation investigates the design and testing of composite bridge deck sections which also serve as short-span bridging for gaps up to 4 m in length. The research focuses on the design of a light-weight core material for bridge decking as well as proof loading of short-span bridge

Investigating the origin of efficiency droop by profiling the voltage across the multi-quantum well of an operating light-emitting diode

Energy Technology Data Exchange (ETDEWEB)

Kim, Taewoong [Department of Nano-Photonics Engineering, Korea University, Seoul 136-713 (Korea, Republic of); Seong, Tae-Yeon [Department of Nano-Photonics Engineering, Korea University, Seoul 136-713 (Korea, Republic of); School of Materials Science and Engineering, Korea University, Seoul 136-713 (Korea, Republic of); Kwon, Ohmyoung, E-mail: omkwon@korea.ac.kr [School of Mechanical Engineering, Korea University, Seoul 136-713 (Korea, Republic of)

2016-06-06

Efficiency droop is a phenomenon in which the efficiency of a light-emitting diode (LED) decreases with the increase in current density. To analyze efficiency droop, direct experimental observations on the energy conversion occurring inside the LED is required. Here, we present the measured voltage profiles on the cross section of an operating LED and analyze them with the cross-sectional temperature profiles obtained in a previous study under the same operation conditions. The measured voltage profiles suggest that with increases in the injection current density, electron depletion shifts from the multi-quantum well through an electron blocking layer to the p-GaN region. This is because electron leakage increases with increases in current density.

40 CFR 86.129-94 - Road load power, test weight, inertia weight class determination, and fuel temperature profile.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, inertia... Procedures § 86.129-94 Road load power, test weight, inertia weight class determination, and fuel temperature... duty trucks 1,2,3 Test weightbasis 4,5 Test equivalent test weight(pounds) Inertia weight class(pounds...

Epigenetic signature of birth weight discordance in adult twins

DEFF Research Database (Denmark)

Tan, Qihua; Nielsen, Morten Frost Munk; Heijmans, Bastiaan T

2014-01-01

between birth weight and adult life health while controlling for not only genetics but also postnatal rearing environment. We performed an epigenome-wide profiling on blood samples from 150 pairs of adult monozygotic twins discordant for birth weight to look for molecular evidence of epigenetic signatures...... profiling did not reveal epigenetic signatures of birth weight discordance although some sites displayed age-dependent intra-pair differential methylation in the extremely discordant twin pairs....

The effect of halogen light stimulation on duration of ultrasound parameters of biophysical profile: a randomized clinical trial.

Science.gov (United States)

Hanafi, Mohammad Ghasem; Sahraeizadeh, Aliakbar

2018-02-22

The objective is to assess if fetal halogen light stimulation can reduce the time needed to obtain a normal biophysical profile (BPP). Patients scheduled for a BPP and who satisfied the inclusion criteria were prospectively randomized to halogen light stimulation and no stimulation groups. The study group was exposed to handheld halogen light for 10 s whenever fetal breathing, movement, or tone was absent through the first 5 min of BPP. The time required to achieve complete BPP score was recorded. In patients with complete BPP score who had delivery within 1 week after the test, perinatal morbidity was examined. A total of 598 patients were randomized (light = 302, no light = 296). There was no difference between the two groups in terms of gestational age, maternal age, body mass index, and indication for BPP except for preterm labor (light: 9%, no light: 4%, p = 0.03). Among the patients who had a normal BPP score (n = 507), the mean (light: 7.1 ± 6 min, no light: 12.3 ± 8 min, p BPP score was significantly less in the light stimulation group than the no stimulation group. Perinatal outcomes were not different between groups who had delivery during the first week after BPP. Fetal halogen light stimulation can be utilized to reduce the time needed to complete a BPP. However, further studies should be conducted in order to determine the effect of this method on decreasing non-reassuring test results. The study was submitted to the Registry of Clinical Trials on 04/20/2017 (IRCT2017041633470N1). After IRCT registration on 06/07/2017, we recruited patients from 06/08/2017 till 10/15/2017.

Weight loss is superior to exercise in improving the atherogenic lipid profile in a sedentary, overweight population with stable coronary artery disease

DEFF Research Database (Denmark)

Pedersen, Lene Rørholm; Olsen, Rasmus Huan; Anholm, Christian

2016-01-01

disease (CAD). METHODS: Seventy non-diabetic participants with CAD, BMI 28-40 kg/m(2), age 45-75 years were randomized to 12 weeks' aerobic interval training (AIT) at 85-90% of peak heart rate three times/week or a low energy diet (LED, 800-1000 kcal/day) for 8-10 weeks followed by 2-4 weeks' weight...... maintenance diet. Lipid profile atherogenicity was described using lipoprotein particle size and density profiling. Low-grade inflammation was evaluated by tumor necrosis factor alpha (TNFα), C-reactive protein, interleukin 6 and soluble urokinase plasminogen activator receptor. RESULTS: Twenty-six (74%) AIT...

Supplemental Upward Lighting from Underneath to Obtain Higher Marketable Lettuce (Lactuca sativa) Leaf Fresh Weight by Retarding Senescence of Outer Leaves.

Science.gov (United States)

Zhang, Geng; Shen, Shanqi; Takagaki, Michiko; Kozai, Toyoki; Yamori, Wataru

2015-01-01

Recently, the so-called "plant factory with artificial lighting" (PFAL) approach has been developed to provide safe and steady food production. Although PFALs can produce high-yielding and high-quality plants, the high plant density in these systems accelerates leaf senescence in the bottom (or outer) leaves owing to shading by the upper (or inner) leaves and by neighboring plants. This decreases yield and increases labor costs for trimming. Thus, the establishment of cultivation methods to retard senescence of outer leaves is an important research goal to improve PFAL yield and profitability. In the present study, we developed an LED lighting apparatus that would optimize light conditions for PFAL cultivation of a leafy vegetable. Lettuce (Lactuca sativa L.) was hydroponically grown under white, red, or blue LEDs, with light provided from above (downward), with or without supplemental upward lighting from underneath the plant. White LEDs proved more appropriate for lettuce growth than red or blue LEDs, and the supplemental lighting retarded the senescence of outer leaves and decreased waste (i.e., dead or low-quality senescent leaves), leading to an improvement of the marketable leaf fresh weight.

Strengthening the composite protective shield of light-weight ship against ballistic impacts: analytical and experimental

Directory of Open Access Journals (Sweden)

I. Jalili

Full Text Available Light and medium protection for small naval vessels guarantees their high performance and safety during the guard duties. In this study, a protective shield fabricated from Dyneema HB25 fibers has been utilized as an add-on layer on the coast guard boat hull. Finite element analyses have been conducted using Chocron's model. Two standards of gun-fire were employed and various thicknesses of the composite layers were examined by ballistic impacts. Afterward, numerical simulations results compared with experiments and revealed a good consistency. Finally, some graphs have been presented to help designers for choosing more convenient shield based on protection and weight characteristics after judgment of vessel requirements.

Sensorimotor memory biases weight perception during object lifting

Directory of Open Access Journals (Sweden)

Vonne evan Polanen

2015-12-01

Full Text Available When lifting an object, the brain uses visual cues and an internal object representation to predict its weight and scale fingertip forces accordingly. Once available, tactile information is rapidly integrated to update the weight prediction and refine the internal object representation. If visual cues cannot be used to predict weight, force planning relies on implicit knowledge acquired from recent lifting experience, termed sensorimotor memory. Here, we investigated whether perception of weight is similarly biased according to previous lifting experience and how this is related to force scaling. Participants grasped and lifted series of light or heavy objects in a semi-randomized order and estimated their weights. As expected, we found that forces were scaled based on previous lifts (sensorimotor memory and these effects increased depending on the length of recent lifting experience. Importantly, perceptual weight estimates were also influenced by the preceding lift, resulting in lower estimations after a heavy lift compared to a light one. In addition, the weight estimations were negatively correlated with the magnitude of planned force parameters. This perceptual bias was only found if the current lift was light, but not heavy since the magnitude of sensorimotor memory effects had, according to Weber’s law, relatively less impact on heavy compared to light objects. A control experiment tested the importance of active lifting in mediating these perceptual changes and showed that when weights are passively applied on the hand, no effect of previous sensory experience is found on perception. These results highlight how fast learning of novel object lifting dynamics can shape weight perception and demonstrate a tight link between action planning and perception control. If predictive force scaling and actual object weight do not match, the online motor corrections, rapidly implemented to downscale forces, will also downscale weight estimation in

A Heavy Heart: The Association between Weight and Emotional Words.

Science.gov (United States)

Zhao, Xueru; He, Xianyou; Zhang, Wei

2016-01-01

People often express emotion in language using weight (e.g., a heavy heart, light-hearted, light humor, or heavy-handed), but the question remains whether these expressions of emotion are rooted in the body. Six experiments used a priming paradigm to explore the metaphoric relation between weight perception and emotional words. Experiments 1 and 2 investigated the influence of weight perception on judgments of emotional words and the influence of emotional words on judgments of weight, respectively. A significant difference between the consistent condition (e.g., lightness corresponds to positive words and heaviness corresponds to negative words) and the inconsistent condition (e.g., lightness corresponds to negative words and heaviness corresponds to positive words) was found in Experiment 1 but not in Experiment 2. Experiments 3, 4, and 5 were conducted to exclude potential confounds. Experiment 6 was a repeated-measures study that was conducted to verify the weight-emotion effect. The study confirmed that weight perception affected judgments of emotional words. The results contribute to the growing literature on conceptual metaphor theory and embodied cognition theory.

Fast-food consumers in Singapore: demographic profile, diet quality and weight status.

Science.gov (United States)

Whitton, Clare; Ma, Yi; Bastian, Amber Carla; Fen Chan, Mei; Chew, Ling

2014-08-01

To determine the demographic profile of fast-food consumers among adult Singapore residents and ascertain whether fast-food consumption frequency is associated with diet quality and weight status. A nationally representative cross-sectional survey including an FFQ and anthropometric measures. Participants were grouped based on their fast-food consumption frequency as non-consumer, occasional consumer or regular consumer, with regular defined as at least once per week. Individuals living in the community in Singapore. Singapore residents (n 1627) aged 18-69 years of Chinese, Malay and Indian ethnicity. Proportions of regular fast-food consumers were higher in younger age groups, higher income groups and middle education level groups. Mean daily energy intake was positively associated with fast-food consumption frequency (non-consumers 9636 kJ (2303 kcal); occasional consumers 11 159 kJ (2667 kcal); regular consumers 13 100 kJ (3131 kcal); P for trend food consumers were more likely to exceed the RDA for energy, fat and saturated fat, and less likely to meet wholegrain and fruit recommendations. Both regular consumers (OR = 1·24; 95 % CI 1·03, 1·51) and occasional consumers (OR = 1·52; 95 % CI 1·32, 1·77) were more likely to have a waist:hip ratio indicating abdominal obesity. Occasional consumers were more likely to have a BMI ≥ 23·0 kg/m2 (OR = 1·19; 95 % CI 1·04, 1·37), whereas regular consumers were less likely (OR = 0·76; 95 % CI 0·64, 0·91) to have an 'at-risk' BMI. Fast-food consumption is most prevalent in young adults, high income and middle education level groups. Frequent fast-food consumption in Singapore is associated with unfavourable dietary and nutrient profiles and abdominal obesity.

Body fat percentage is better than indicators of weight status to identify children and adolescents with unfavorable lipid profile.

Science.gov (United States)

Oliosa, Polyana Romano; Zaniqueli, Divanei; Alvim, Rafael de Oliveira; Barbosa, Miriam Carmo Rodrigues; Mill, José Geraldo

2018-01-05

To assess whether the indicators of weight status body mass index and waist-to-height ratio are similar to body fat percentage to identify obese children and adolescents with unfavorable lipid profile. This was a cross-sectional study involving 840 children and adolescents (6-18 years). The same individuals were classified as non-obese (

weight status, body mass index, and waist-to-height ratio. Body fat percentage was obtained by multi-frequency bioelectrical impedance. Linear association between obesity and increased lipid fractions was tested by ANCOVA. Normal distribution curves of non-HDL cholesterol were designed for obese and non-obese. To provide the proportion of obese individuals with elevated non-HDL-c across all indicators, Z-score was calculated. Obese boys presented higher non-HDL cholesterol when compared with those non-obese, classified by body mass index (107±28 vs. 94±25mg/dL, p=0.001), waist-to-height ratio (115±29 vs. 94±25mg/dL, p<0.001) and body fat percentage (119±33 vs. 94±24mg/dL, p<0.001). Differently, obese girls presented with higher non-HDL cholesterol when compared with those non-obese only according to the body fat percentage classification (118±24 vs. 96±26mg/dL, p=0.001). A large shift to the right in the distribution curve of non-HDL cholesterol among obese girls compared with non-obese was observed only when body fat percentage was used to discriminate between obese and non-obese. Body fat percentage was better than the indicators of weight status to identify children and adolescents with unfavorable lipid profile, mainly among girls. Copyright © 2017. Published by Elsevier Editora Ltda.

The Effects of 6 Isocaloric Meals on Body Weight, Lipid Profiles, Leptin, and Adiponectin in Overweight Subjects (BMI > 25

Directory of Open Access Journals (Sweden)

Zeynab Hatami Zargaran

2014-06-01

Full Text Available Background: It seems that meal frequency is negatively related to body weight, but the relationship between meal frequency and weight loss is not clearly known yet. Objectives: The present study aimed to investigate whether 6 isocaloric meals affected body weight, lipid profiles, leptin, and adiponectin in overweight subjects. Methods: The present randomized controlled trial was conducted on 90 overweight subjects in 3 months. The subjects were randomly divided into two groups. The control group continued their normal diet, while the intervention group was required to follow a 6 isocaloric meal diet instead of their previous meal pattern (3 meals and 2 snacks. The planned reduced calorie diets for both groups were identical, except for meal pattern. Blood samples were analyzed prior to and at the end of the study for total cholesterol, triglyceride, HDL-C, LDL-C, leptin, and adiponectinn concentrations. Paired t-test was used for comparison of the measurements before and after the study in each group. Besides, independent t-test was used for comparison of the measurements between the groups. P value less than 0.05 was considered as statistically significant. Results: The mean age of the participants was 36.38 ± 9.7 in the intervention group and 37.6 ± 10.9 in the control group. In comparison to the control group, the intervention group showed a significant decrease in total cholesterol (P < 0.001, LDL-C (P < 0.001, BMI (P < 0.001, triglyceride (P < 0.001, and leptin (P = 0.002 and a significant increase in HDL (P < 0.001 and adiponectin (P = 0.031. Conclusions: The 6 isocaloric meal pattern led to a reduction in BMI, lipid profiles (total cholesterol, LDL-C, triglyceride, and leptin concentrations and an increase in HDL and adiponectin compared to the normal diet.

CONTROL DE MALEZA EN DISTRITOS DE RIEGO CON EQUIPOS LIGEROS WEED CONTROL IN IRRIGATION DISTRICTS WITH LIGHT WEIGHT EQUIPMENT

Directory of Open Access Journals (Sweden)

José Ramón Lomelí Villanueva

2010-12-01

Full Text Available En México el control mecánico de maleza, tradicionalmente se realizaba con maquinaria inadecuada lo cual provocaba daños en los taludes y modificaciones de la sección hidráulica. Para resolver este problema, actualmente se utilizan los equipos ligeros que permiten el desarrollo de una cubierta vegetal, que no interfiere con el flujo del agua y su sistema radical retiene el suelo, lo cual reduce la erosión y mantiene en condiciones estables los taludes. El presente trabajo aborda los aspectos relativos a características y criterios para la selección de los implementos y la secuencia para su utilización. El costo de las operaciones para el control de maleza en canales, drenes y caminos se ha reducido un 39,21% con respecto a utilizar maquinaria inadecuada. La versatilidad de los equipos ligeros permite emplear el implemento más adecuado para cada tipo de maleza. En México, el inventario actual es de 263 equipos ligeros que tienen un potencial de aplicación para el control de la maleza, en la totalidad de los caminos, el 90% de canales y el 70% de drenes de los Distritos de Riego.In Mexico, the mechanical weed control was traditionally carried out with inadequate equipment which caused damage to the slopes and changes in the hydraulic section. In order to solve this problem, light weight equipment is currently being used to allow the development of a vegetation cover to retain soil with no interference with water flow, reducing erosion and maintaining stable conditions in the slopes. This paper addresses aspects related to characteristics and criteria for selecting and sequencing tools for use. The costs of weed control in irrigation channels, drains and roads have been reduced 39.21% compared to using inadequate equipment. The versatility of light weight equipment allows the use of the most appropriate implement for each weed. In Mexico, the current inventory includes 263 light weight devices with which a potential weed control of 90

A Heavy Heart: The Association between Weight and Emotional Words

OpenAIRE

Zhao, Xueru; He, Xianyou; Zhang, Wei

2016-01-01

People often express emotion in language using weight (e.g., a heavy heart, light-hearted, light humor, or heavy-handed), but the question remains whether these expressions of emotion are rooted in the body. Six experiments used a priming paradigm to explore the metaphoric relation between weight perception and emotional words. Experiments 1 and 2 investigated the influence of weight perception on judgments of emotional words and the influence of emotional words on judgments of weight, respec...

High Chamber Pressure, Light Weight Thrusters, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The performance liquid propellant engines can be significantly improved by increasing both combustion temperature and pressure and reducing engine weight. State of...

A tele-operated mobile ultrasound scanner using a light-weight robot.

Science.gov (United States)

Delgorge, Cécile; Courrèges, Fabien; Al Bassit, Lama; Novales, Cyril; Rosenberger, Christophe; Smith-Guerin, Natalie; Brù, Concepció; Gilabert, Rosa; Vannoni, Maurizio; Poisson, Gérard; Vieyres, Pierre

2005-03-01

This paper presents a new tele-operated robotic chain for real-time ultrasound image acquisition and medical diagnosis. This system has been developed in the frame of the Mobile Tele-Echography Using an Ultralight Robot European Project. A light-weight six degrees-of-freedom serial robot, with a remote center of motion, has been specially designed for this application. It holds and moves a real probe on a distant patient according to the expert gesture and permits an image acquisition using a standard ultrasound device. The combination of mechanical structure choice for the robot and dedicated control law, particularly nearby the singular configuration allows a good path following and a robotized gesture accuracy. The choice of compression techniques for image transmission enables a compromise between flow and quality. These combined approaches, for robotics and image processing, enable the medical specialist to better control the remote ultrasound probe holder system and to receive stable and good quality ultrasound images to make a diagnosis via any type of communication link from terrestrial to satellite. Clinical tests have been performed since April 2003. They used both satellite or Integrated Services Digital Network lines with a theoretical bandwidth of 384 Kb/s. They showed the tele-echography system helped to identify 66% of lesions and 83% of symptomatic pathologies.

Development of a diamond detector for temporal profile measurements of intense, short ion bunches within the LIGHT project

Energy Technology Data Exchange (ETDEWEB)

Jahn, Diana [Technische Universitaet Darmstadt (Germany); Traeger, Michael; Kis, Mladen [GSI Helmholtzzentrum fuer Schwerionenforschung (Germany); Collaboration: LIGHT-Collaboration

2016-07-01

In the context of the Laser Ion Generation, Handling and Transport (LIGHT) research project at GSI, laser-driven ion acceleration and beam shaping are explored, combining a target normal sheath acceleration (TNSA) proton source with conventional accelerator technology. In the LIGHT experimental campaign in 2015, protons were accelerated via the TNSA mechanism, an energy of 7.8 MeV was selected and collimated with a pulsed solenoid and injected into a rf cavity. Through phase focusing, temporally compressed proton bunches were generated to a pulse length of <240 ps (FWHM) with up to 5 x 10{sup 8} particles in a single bunch at a distance of 6 m from the source. An ultrafast diamond detector has been specially developed to measure the temporal profile of these bunches and will be presented.

Continuous glucose profiles in obese and normal-weight pregnant women on a controlled diet: metabolic determinants of fetal growth.

Science.gov (United States)

Harmon, Kristin A; Gerard, Lori; Jensen, Dalan R; Kealey, Elizabeth H; Hernandez, Teri L; Reece, Melanie S; Barbour, Linda A; Bessesen, Daniel H

2011-10-01

We sought to define 24-h glycemia in normal-weight and obese pregnant women using continuous glucose monitoring (CGM) while they consumed a habitual and controlled diet both early and late in pregnancy. Glycemia was prospectively measured in early (15.7 ± 2.0 weeks' gestation) and late (27.7 ± 1.7 weeks' gestation) pregnancy in normal-weight (n = 22) and obese (n = 16) pregnant women on an ad libitum and controlled diet. Fasting glucose, triglycerides (early pregnancy only), nonesterified fatty acids (FFAs), and insulin also were measured. The 24-h glucose area under the curve was higher in obese women than in normal-weight women both early and late in pregnancy despite controlled diets. Nearly all fasting and postprandial glycemic parameters were higher in the obese women later in pregnancy, as were fasting insulin, triglycerides, and FFAs. Infants born to obese mothers had greater adiposity. Maternal BMI (r = 0.54, P = 0.01), late average daytime glucose (r = 0.48, P fasting insulin (r = 0.49, P fasting triglycerides (r = 0.67, P fasting FFAs (r = 0.54, P obese women without diabetes have higher daytime and nocturnal glucose profiles than normal-weight women despite a controlled diet both early and late in gestation. Body fat in infants, not birth weight, was related to maternal BMI, glucose, insulin, and FFAs, but triglycerides were the strongest predictor. These metabolic findings may explain higher rates of infant macrosomia in obese women, which might be targeted in trials to prevent excess fetal growth.

THE LUMINOSITY PROFILES OF BRIGHTEST CLUSTER GALAXIES

International Nuclear Information System (INIS)

Donzelli, C. J.; Muriel, H.; Madrid, J. P.

2011-01-01

We have derived detailed R-band luminosity profiles and structural parameters for a total of 430 brightest cluster galaxies (BCGs), down to a limiting surface brightness of 24.5 mag arcsec -2 . Light profiles were initially fitted with a Sersic's R 1/n model, but we found that 205 (∼48%) BCGs require a double component model to accurately match their light profiles. The best fit for these 205 galaxies is an inner Sersic model, with indices n ∼ 1-7, plus an outer exponential component. Thus, we establish the existence of two categories of the BCG luminosity profiles: single and double component profiles. We found that double profile BCGs are brighter (∼0.2 mag) than single profile BCGs. In fact, the Kolmogorov-Smirnov test applied to these subsamples indicates that they have different total magnitude distributions, with mean values M R = -23.8 ± 0.6 mag for single profile BCGs and M R = -24.0 ± 0.5 mag for double profile BCGs. We find that partial luminosities for both subsamples are indistinguishable up to r = 15 kpc, while for r > 20 kpc the luminosities we obtain are on average 0.2 mag brighter for double profile BCGs. This result indicates that extra-light for double profile BCGs does not come from the inner region but from the outer regions of these galaxies. The best-fit slope of the Kormendy relation for the whole sample is a = 3.13 ± 0.04. However, when fitted separately, single and double profile BCGs show different slopes: a single = 3.29 ± 0.06 and a double = 2.79 ± 0.08. Also, the logarithmic slope of the metric luminosity α is higher in double profile BCGs (α double = 0.65 ± 0.12) than in single profile BCGs (α single = 0.59 ± 0.14). The mean isophote outer ellipticity (calculated at μ ∼ 24 mag arcsec -2 ) is higher in double profile BCGs (e double = 0.30 ± 0.10) than in single profile BCGs (e single = 0.26 ± 0.11). Similarly, the mean absolute value of inner minus outer ellipticity is also higher in double profile BCGs. From a

Surgical lights. Making a purchase decision.

Science.gov (United States)

Gregory, M M

1987-11-01

Based on the preceding factors, a profile can be made for each light. The profile should include the following information: product literature with detailed information about the light, the average score from each of the six categories on the questionnaire, a summary of positive and negative comments from the questionnaire (recurring comments can identify significant factors), recommendations from other hospitals using the light, warranty and service information and any pertinent information about the vendor and manufacturer, information or comments from the clinical engineer, the purchasing agent, and the architect/engineer, and information about possible purchase agreements. Once the profiles of the lights are finished, present them to the OR committee or group charged with making the final decision. The information will enable the group to compare the lights and will serve as a basis for either the final purchase or a detailed bid specification. If cost is a major factor in the decision, the evaluation results can be used to justify purchasing lights that are more expensive but that the users believe are clearly superior. This constitutes the "professional justification" that some government institutions require to circumvent regulations that require buying the low-bid product. Although the result of this selection process is clearly a subjective decision, it is an informed subjective decision. Once the lights are installed, the staff members' satisfaction with the lights will not be based on objective criteria but on the same subjective opinions that were used to justify the selection.

Environmental safety analysis tests on the Light Weight Radioisotope Heater Unit (LWRHU)

International Nuclear Information System (INIS)

Tate, R.E.; Land, C.C.

1985-05-01

A series of safety tests has been performed on the Light Weight Radioisotope Heater Unit (LWRHU), a 238 PuO 2 -fueled device designed to provide thermal energy at selected locations in a spacecraft. The tests simulate the thermal and mechanical environments postulated for spacecraft accidents on the launch pad and on reentry abort. The tests demonstrate almost complete containment of the fuel, or fuel simulant (depleted UO 2 ), in (1) an overpressure environment of 12.76 MPa (1850 psi), (2) on impact by an 18-g aluminum fuel-tank fragment at velocities greater than 750 m/s (2460 ft/s) but less than 900 m/s (2950 ft/s), (3) during a 10.5-min burn of a 0.9 x 0.9 x 0.9 m (3 x 3 x 3 ft) block of solid rocket motor propellant, (4) after impact at 49 m/s (161 ft/s) in four different orientations on a hard surface, and (5) during immersion in seawater for 1.75 years at both sea level pressure and at a pressure equivalent to 6000 m (19,700 ft) of ocean depth

Body weight and ADHD: examining the role of self-regulation.

Directory of Open Access Journals (Sweden)

Zia Choudhry

Full Text Available Attention-Deficit/Hyperactivity Disorder (ADHD is a complex and heterogeneous childhood disorder that often coexists with other psychiatric and somatic disorders. Recently, a link between ADHD and body weight dysregulation has been reported and often interpreted as impaired self-regulation that is shared between the two conditions. The objective of this study is to investigate the relation between body weight/BMI and cognitive, emotional and motor characteristics in children with ADHD.284 ADHD children were stratified by weight status/BMI according to WHO classification and compared with regard to their neurocognitive characteristics, motivational style, and motor profile as assessed by a comprehensive battery of tests. All comparisons were adjusted for demographic characteristics of relevance including, socioeconomic status (SES.Both Obese and overweight ADHD children exhibited significantly lower SES compared to normal weight ADHD children. No significant differences were observed between the three groups with regards to their neurocognitive, emotional and motor profile.Our findings provide evidence that differences in weight/BMI are not accounted for by cognitive, motivational and motor profiles. Socio-economic characteristics are strongly associated with overweight and obesity in ADHD children and may inform strategies aimed at promoting healthier weight.

Effect of Parental Live Weight on the Reproductive Performance of ...

African Journals Online (AJOL)

High mortality was obtained from HM x HF and HM x LF crosses. This study concluded that light male and light female crosses gave chicks with better post hatching performance and lowest mortality rate than all other crosses. Keywords: Parental live weight, Egg weight, Hatchability, Fertility, Crosses, Japanese quail ...

The low molecular weight protein PsaI stabilizes the light-harvesting complex II docking site of photosystem I

DEFF Research Database (Denmark)

Plöchinger, Magdalena; Torabi, Salar; Rantala, Marjaana

2016-01-01

PsaI represents one of three low molecular weight peptides of PSI. Targeted inactivation of the plastid PsaI gene in Nicotiana tabacum has no measurable effect on photosynthetic electron transport around PSI or on accumulation of proteins involved in photosynthesis. Instead, the lack of Psa......I destabilizes the association of PsaL and PsaH to PSI, both forming the light-harvesting complex (LHC)II docking site of PSI. These alterations at the LHCII binding site surprisingly did not prevent state transition but led to an increased incidence of PSI-LHCII complexes, coinciding with an elevated...

Design of segmented thermoelectric generator based on cost-effective and light-weight thermoelectric alloys

International Nuclear Information System (INIS)

Kim, Hee Seok; Kikuchi, Keiko; Itoh, Takashi; Iida, Tsutomu; Taya, Minoru

2014-01-01

Highlights: • Segmented thermoelectric (TE) module operating at 500 °C for combustion engine system. • Si based light-weight TE generator increases the specific power density [W/kg]. • Study of contact resistance at the bonding interfaces maximizing output power. • Accurate agreement of the theoretical predictions with experimental results. - Abstract: A segmented thermoelectric (TE) generator was designed with higher temperature segments composed of n-type Mg 2 Si and p-type higher manganese silicide (HMS) and lower temperature segments composed of n- and p-type Bi–Te based compounds. Since magnesium and silicon based TE alloys have low densities, they produce a TE module with a high specific power density that is suitable for airborne applications. A two-pair segmented π-shaped TE generator was assembled with low contact resistance materials across bonding interfaces. The peak specific power density of this generator was measured at 42.9 W/kg under a 498 °C temperature difference, which has a good agreement with analytical predictions

Evaluation of fatty acid profile and biodiesel properties of microalga Scenedesmus abundans under the influence of phosphorus, pH and light intensities.

Science.gov (United States)

Mandotra, S K; Kumar, Pankaj; Suseela, M R; Nayaka, S; Ramteke, P W

2016-02-01

The present study dealt with biomass, lipid concentration, fatty acid profile and biodiesel properties of microalga Scenedesmus abundans under different phosphate concentrations, pH and light intensities, one at a time. Among different phosphate concentrations, higher biomass (770.10±11.0mg/L) and lipid concentration (176.87±4.6mg/L) were at the concentration of 60mg/L. Light intensity at 6000lux yielded higher biomass and lipid concentration of 742.0±9.7 and 243.15±9.1mg/L, respectively. The biomass (769.0±12.3mg/L) and lipid (179.47±5.5mg/L) concentration were highest at pH 8 and pH 6, respectively. All the culture treatments showed marked effect on the fatty acid profile and biodiesel properties of the extracted oil. FAME derived biodiesel properties were compared with European biodiesel standards (EN 14214), Indian biodiesel standards (IS 15607) and American biodiesel standards (ASTM D 6751-08) to assess the suitability of algal oil as biodiesel feedstock. Copyright © 2015. Published by Elsevier Ltd.

Application of monosymmetrical I-beams in light metal frames with variable stiffness

Directory of Open Access Journals (Sweden)

I.O. Sklyarov

2016-05-01

Full Text Available The article is devoted to effectiveness of using of monosymmetrical I-beams with flexible wall frame structures of variable section, features of their calculation and design. Aim: The aim of research is to confirm the feasibility of I-beams with flexible wall bearing as light metal skeletons for buildings of the universal assignment. Materials and Methods: In order to reduce the metal consumption a frame is conventionally divided into several sections according to bending moment diagrams so that in the more compressed zone section the belt of great area was located, and in the stretched or less intense zone the lesser belt was installed. The resulting sections have smaller area in compare to symmetric profiles. Additional reduce bending moments provided as a result of displacement of elements axes with variable cross section. Results: The calculations and selection of sections of the frame have shown that it can be achieved the reducing of bearing elements weight by 10% compared to the symmetrical profiles of variable stiffness due to using monosymmetrical sections. The effectiveness of the proposed constructive solution is confirmed by compare of the projected weight frame construction with existing analogue. The symmetrical frame profile is 15.3% lighter; the monosymmetrical frame profile is 27% lighter. Conclusions: Analysis of stress-strain state structures shown: first, through asymmetrical profile there is a shifting of the center of gravity section, which leads to a redistribution of internal forces in the frame; secondly, because of the small cross-sectional area of the stretched zones more difficult to ensure the stability of the plane form of bending beams, which leads to the necessity to disconnect areas curtain beams by constraints of smaller steps.

Eating patterns and food choice as determinant of weight loss and improvement of metabolic profile after RYGB.

Science.gov (United States)

Molin Netto, Bárbara Dal; Earthman, Carrie P; Farias, Gisele; Landi Masquio, Deborah Cristina; Grotti Clemente, Ana Paula; Peixoto, Priscilla; Bettini, Solange Cravo; von Der Heyde, Maria Emilia; Dâmaso, Ana R

2017-01-01

Significant changes in the preference for different dietary components have been observed after Roux-en-Y gastric bypass (RYGB). The aim of this study was to evaluate the early post-RYGB changes in quality of eating patterns and their relationship to weight loss and metabolic parameters. The sample was composed of 41 extremely obese individuals undergoing RYGB. Dietary data were collected using a validated food frequency questionnaire in Brazil. A food intake evaluation was conducted with a focus on the frequency of consumption (≥4 times/wk) of markers for healthy eating and markers for unhealthy eating. Furthermore, anthropometric and metabolic markers were collected before surgery and 6 mo post-RYGB. Compared with baseline, the postsurgery body mass index was reduced by 12.9 kg/m 2 , corresponding to an excess weight loss of 63.5%. Blood glucose, insulin, ferritin, cholesterol, low-density lipoprotein-cholesterol, triacylglycerol (TG), and hemoglobin were reduced 6 mo after RYGB (P hamburger), and some healthy food increased (e.g., from 0% to 5.1% for fish and from 0% to 25.6% for plain yogurt). There was a decrease in the frequency of individuals who reported consuming fruit and vegetables. Conversely, insulin, glucose, and TG levels were positively associated with intake of chocolates/truffles and ice cream/sundaes. Participants in the present study appeared to develop a healthier dietary pattern by 6 mo after RYGB. These results show that a healthier dietary pattern is associated with a significant improvement of metabolic profile and weight loss. Copyright © 2016 Elsevier Inc. All rights reserved.

Effects of Anabolic Steroids on Lipoprotein Profiles of Female Weight Lifters.

Science.gov (United States)

Moffatt, Robert J.; And Others

1990-01-01

This study examined the effects of resistance exercise and anabolic steroids on lipoprotein profiles of female weightlifters. The study found that women who participate in resistance training have better lipoprotein profiles than their sedentary counterparts, but these changes do not offset the deleterious effects of steroid use. (SM)

Lipid Replacement Therapy Functional Food Formulation with NT Factor for Reducing Weight, Girth, Body Mass, Appetite and Fatigue While Improving Blood Lipid Profiles

Directory of Open Access Journals (Sweden)

Rita R. Ellithorpe

2012-01-01

Full Text Available Background: Lipid Replacement Therapy using NT Factor® plus kidney bean alpha-amylase inhibitor (Healthy Curb® was used in a two month weight loss clinical trial to reduce weight and improve fatigue without changing easting or exercise patterns and without use of drugs, stimulants or herbs. Objectives: To determine the effects of an all-natural functional food, NT Factor® plus alpha-amylase inhibitor (Healthy Curb®, on weight loss, body girth, body mass and index, basal metabolic rate, appetite, carvings for sweets and fatigue as well as blood lipid profiles during a 2-month open label clinical trial without food restrictions or increases in physical activity.Methods: Thirty subjects (Mean Age = 56.8 ± 1.8; 24 females and 6 males used the functional food containing NT Factor® (500 mg and alpha-amylase inhibitor (500 mg 30 min before each meal in tablet form. Participants were told to eat and exercise normally. Weight, waist and hip measurements were taken weekly. Appetite and sweet cravings were assessed weekly by standard methods. Fatigue was determined using the Piper Fatigue Scale. Blood samples were taken prior to and at the end of the trial for lipid and chemical analyses. Results: Sixty-three percent of the participants lost an average of 6.11 ± 0.28 pounds (2.77 ± 0.12 Kg (p<0.001 along with average reductions of 2.51 ± 0.05 inches (6.4 ± 0.13 cm (p<0.0001 and 1.5 ± 0.04 inches (3.8 ± 0.10 cm (p<0.0001 from waist and hip circumferences, respectively. The entire Functional Foods in Health and Disease 2012, 2(1:11-24 group lost an average of 3.63 ± 0.13 pounds (1.65 ± 0.11 Kg (p<0.001 with average reductions of 1.59 ± 0.03 inches (4.04 ± 0.06 cm (p<0.0001 and 1.13 ± 0.02 inch (2.87 ± 0.05 cm (p<0.0001 from waist and hip circumferences, respectively. Weight loss and body measurement decreases were gradual, consistent and significant, along with reductions in body mass index (BMI and basal metabolic rate (BMR measurements

Influence of pre-pregnancy leisure time physical activity on gestational and postpartum weight gain and birth weight

DEFF Research Database (Denmark)

Hegaard, Hanne Kristine; Rode, Line; Katballe, Malene Kjær

2017-01-01

In order to examine the association between pre-pregnancy leisure time physical activities and gestational weight gain, postpartum weight gain and birth weight, we analysed prospectively collected data from 1827 women with singleton term pregnancies. Women were categorised in groups of sedentary...... risk of having a gestational weight gain above Institute of Medicine (IOM) recommendations with an odds ratio of 2.60 (1.32-5.15) compared to light exercisers. However, birth weight and one year postpartum weight was similar for all four groups. Thus, although competitive athletes gain more weight than...... recommended during pregnancy, this may not affect birth weight or postpartum weight. Impact statement: What is already known on this subject: Previous studies have found that increased pre-pregnancy physical activity is associated with lower gestational weight gain during the last trimester, but showed...

Project Profile: Hydrogen Fuel Cell Mobile Lighting Tower (HFCML)

Science.gov (United States)

McLaughlin, Russell

2013-01-01

NASA is committed to finding innovative solutions that improve the operational performance of ground support equipment while providing environment and cost benefits, as well. Through the Hydrogen Fuel Cell Mobile Lighting Tower (HFCML) project, NASA gained operational exposure to a novel application of high efficiency technologies. Traditionally, outdoor lighting and auxiliary power at security gates, launch viewing sites, fallback areas, outage support, and special events is provided by diesel generators with metal halide lights. Diesel generators inherently contribute to C02, NOx, particulate emissions, and are very noisy. In 2010, engineers from NASA's Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) introduced KSC operations to a novel technology for outdoor lighting needs. Developed by a team led by Sandia National Laboratory (SNL), the technology pairs a 5kW hydrogen fuel cell with robust high efficiency plasma lights in a towable trailer. Increased efficiency, in both the fuel cell power source and lighting load, yields longer run times between fueling operations while providing greater auxiliary power. Because of the unit's quiet operation and no exhaust fumes, it is capable of being used indoors and in emergency situations, and meets the needs of all other operational roles for metal halide/diesel generators. The only discharge is some water and warm air. Environmental benefits include elimination of diesel particulate emissions and estimated 73% greenhouse gas emissions savings when the hydrogen source is natural gas (per GREET model). As the technology matures the costs could become competitive for the fuel cell units which are approximately 5 times diesel units. Initial operational . concerns included the hydrogen storage tanks and valves, lightning safety/grounding, and required operating and refueling procedures. TEERM facilitated technical information exchange (design drawings, technical standards, and operations

Influence of weight status on physical and mental health in ...

African Journals Online (AJOL)

Conclusion: Cardiovascular and lipid profile and fitness, important indicators of cardiovascular disease risk, worsened as weight status increased, whereas quality of life appears to be independent of weight status. Exercise and nutritional programs focus on weight management may be advisable in this under studied ...

Profiling analysis of low molecular weight heparins by multiple heart-cutting two dimensional chromatography with quadruple time-of-flight mass spectrometry.

Science.gov (United States)

Ouyang, Yilan; Zeng, Yangyang; Rong, Yinxiu; Song, Yue; Shi, Lv; Chen, Bo; Yang, Xinlei; Xu, Naiyu; Linhardt, Robert J; Zhang, Zhenqing

2015-09-01

Low molecular weight heparins (LMWHs) are polydisperse and microheterogenous mixtures of polysaccharides used as anticoagulant drugs. Profiling analysis is important for obtaining deeper insights into the structure of LMWHs. Previous oligosaccharide mapping methods are relatively low resolution and are unable to show an entire picture of the structural complexity of LMWHs. In the current study a profiling method was developed relying on multiple heart-cutting, two-dimensional, ultrahigh performance liquid chromatography with quadruple time-of-flight mass spectrometry. This represents an efficient, automated, and robust approach for profiling LMWHs. Using size-exclusion chromatography and ion-pairing reversed-phase chromatography in a two-dimensional separation, LMW components of different sizes and LMW components of the same size but with different charges and polarities can be resolved, providing a more complete picture of a LMWH. Structural information on each component was then obtained with quadrupole time-of-flight mass spectrometry. More than 80 and 120 oligosaccharides were observed and unambiguously assigned from the LMWHs, nadroparin and enoxaparin, respectively. This method might be useful for quality control of LMWHs and as a powerful tool for heparin-related glycomics.

How Much Weight to Use During Strength Training Activities

Science.gov (United States)

Many women want to start a strength training routine but aren’t sure how much weight to use. Start with resistance bands, soup cans, or light weights (1 to 3 pounds) and build up to tighter bands or heavier weights as you feel and become stronger.

Blood profile of proteins and steroid hormones predicts weight change after weight loss with interactions of dietary protein level and glycemic index

DEFF Research Database (Denmark)

Wang, Ping; Holst, Claus; Andersen, Malene R

2011-01-01

Weight regain after weight loss is common. In the Diogenes dietary intervention study, high protein and low glycemic index (GI) diet improved weight maintenance.......Weight regain after weight loss is common. In the Diogenes dietary intervention study, high protein and low glycemic index (GI) diet improved weight maintenance....

[Search for potential gastric cancer biomarkers using low molecular weight blood plasma proteome profiling by mass spectrometry].

Science.gov (United States)

Shevchenko, V E; Arnotskaia, N E; Ogorodnikova, E V; Davydov, M M; Ibraev, M A; Turkin, I N; Davydov, M I

2014-01-01

Gastric cancer, one of the most widespread malignant tumors, still lacks reliable serum/plasma biomarkers of its early detection. In this study we have developed, unified, and tested a new methodology for search of gastric cancer biomarkers based on profiling of low molecular weight proteome (LMWP) (1-17 kDa). This approach included three main components: sample pre-fractionation, matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS), data analysis by a bioinformatics software package. Applicability and perspectives of the developed approach for detection of potential gastric cancer markers during LMWP analysis have been demonstrated using 69 plasma samples from patients with gastric cancer (stages I-IV) and 238 control samples. The study revealed peptides/polypeptides, which may be potentially used for detection of this pathology.

Passive beam sprending systems and light-weight gentries for synchrotron based hadron therapy

International Nuclear Information System (INIS)

Maier, A.

1998-12-01

Hadron therapy is a promising technique that uses beams of protons or light ions for the treatment of cancer. In order to open this technique to a wider application, dedicated hospital based treatment centers are now needed. The Proton-Ion Medical Machine Study (PIMMS) in CERN is concerned with the design of such a center that would use both protons and light ions. The dual species operation makes it preferable to base the center on a synchrotron. The present thesis is concerned with the beam delivery for the protons. After introducing the basic vocabulary of linear beam optics, the feasibility of a light-weight gantry with passive beam spreading fed by a synchrotron is investigated. The device is a non-linear magnetic structure, which can be described as a magnetic guide or as a proton pipe. Detailed studies show that while it is possible to design an optically stable 270 o section, which would be necessary for a gantry, the properties do not fulfil the requirements of a gantry for medical purposes. It was therefore concluded that a conventional isocentric gantry would be used for protons. The problem of passive beam-spreading is also investigated. A detailed knowledge of multiple scattering is necessary for the design of such a system. The basic principles of multiple scattering following Moliere's theory are mentioned. In addition, a Gaussian approximation of multiple scattering developed by Highland is described. A treatment of multiple scattering for thick and thin scatterers is then developed using the so-called Q-formalism that is frequently used in accelerator optics. This is then used to give a statistical description of the beam with scattering included using the Twiss formalism that is also used widely in accelerator physics. Excellent agreement is demonstrated with Monte-Carlo data. The Twiss-Scatterer relations obtained make it possible to include arbitrary, thick scatterers in accelerator codes. High intensities for protons are less readily available

Effect of Light- and Dark-Germination on the Phenolic Biosynthesis, Phytochemical Profiles, and Antioxidant Activities in Sweet Corn (Zea mays L.) Sprouts.

Science.gov (United States)

Xiang, Nan; Guo, Xinbo; Liu, Fengyuan; Li, Quan; Hu, Jianguang; Brennan, Charles Stephen

2017-06-10

Sweet corn is one of the most widely planted crops in China. Sprouting of grains is a new processes to increase the nutritional value of grain products. The present study explores the effects of light on the nutritional quality of sweet corn sprouts. Gene expression of phenolic biosynthesis, phytochemical profiles and antioxidant activity were studied. Two treatments (light and dark) were selected and the morphological structure of sweet corn sprouts, as well as their biochemical composition were investigated to determine the effects of light on the regulation of genes responsible for nutritional compounds. Transcription analyses for three key-encoding genes in the biosynthesis of the precursors of phenolic were studied. Results revealed a negative regulation in the expression of Zm PAL with total phenolic content (TPC) in the light group. TPC and total flavonoid content (TFC) increased during germination and this was correlated with an increase in antioxidant activity ( r = 0.95 and 1.0). The findings illustrate that the nutritional value of sweet corn for the consumer can be improved through germination to the euphylla stage.

Light curve and pulse profile of the x-ray pulsar Vela X-1

International Nuclear Information System (INIS)

Nagase, Fumiaki; Hayakawa, Satio; Makino, Fumiyoshi; Sato, Naohisa; Makishima, Kazuo.

1983-01-01

The following properties of the X-ray binary pulsar Vela X-1 are presented by reference to its observations in March 1980. The light curve shows a high state and a low state in the first and second halves of an orbital period, respectively, but they may rather be defined as a soft state and hard state, respectively, since the intensity above 9 keV does not appreciably change between these two states. The energy spectra in these states indicate the presence of circumstellar absorption. The pulse profiles at high (9-22 keV) and low (1-9 keV) energies are different, indicating the absorption by cold matter which is probably in the accretion column. The absorber which is responsible for the soft and hard states is attributed to the stellar wind whose flow pattern is consistent with that obtained from optical absorption spectra. The orbital period is obtained by a combined analysis of X-ray data since 1972. No appreciable change of the period gives a constraint on the dynamical behavior of the binary system. (author)

Blood profile of proteins and steroid hormones predicts weight change after weight loss with interactions of dietary protein level and glycemic index.

Directory of Open Access Journals (Sweden)

Ping Wang

2011-02-01

Full Text Available Weight regain after weight loss is common. In the Diogenes dietary intervention study, high protein and low glycemic index (GI diet improved weight maintenance.To identify blood predictors for weight change after weight loss following the dietary intervention within the Diogenes study.Blood samples were collected at baseline and after 8-week low caloric diet-induced weight loss from 48 women who continued to lose weight and 48 women who regained weight during subsequent 6-month dietary intervention period with 4 diets varying in protein and GI levels. Thirty-one proteins and 3 steroid hormones were measured.Angiotensin I converting enzyme (ACE was the most important predictor. Its greater reduction during the 8-week weight loss was related to continued weight loss during the subsequent 6 months, identified by both Logistic Regression and Random Forests analyses. The prediction power of ACE was influenced by immunoproteins, particularly fibrinogen. Leptin, luteinizing hormone and some immunoproteins showed interactions with dietary protein level, while interleukin 8 showed interaction with GI level on the prediction of weight maintenance. A predictor panel of 15 variables enabled an optimal classification by Random Forests with an error rate of 24±1%. A logistic regression model with independent variables from 9 blood analytes had a prediction accuracy of 92%.A selected panel of blood proteins/steroids can predict the weight change after weight loss. ACE may play an important role in weight maintenance. The interactions of blood factors with dietary components are important for personalized dietary advice after weight loss.ClinicalTrials.gov NCT00390637.

Light-weight alloys for aerospace applications II; Proceedings of the 2nd Symposium, New Orleans, LA, Feb. 17-21, 1991

International Nuclear Information System (INIS)

Lee, E.W.; Kim, N.J.

1991-01-01

The present symposium on applications of light-weight alloys for aerospace discusses Al-Li alloys, aluminum alloys, advanced composites, and light alloys. Attention is given to Al-Li alloy development for parts made from thick plates, the structure and properties of P/M-aluminum alloys, X-ray rocking curve analysis of aging and deformation characteristics in Al-Li alloys, and the transformation characteristics of the 2090 Al-Li alloy. Topics considered include microstructural development in a rapidly solidified Al-Fe-V-Si alloy, the structure and mechanical properties of rapidly solidified Al-Cr-Hf alloys, the deformation mechanisms in superplastic Al-Mg alloys by microtexture technique, and the design of powder metallurgy aluminum alloys. Also discussed are the mechanical properties of monolithic and particular composites of L1(2) forms of Al3Ti, in situ polymer fiber-reinforced hybrid materials, thermal cycling of Ti-1421/SiC metal matrix composites, and the fracture behavior of a Ti3-Al-Nb alloy

Utility of waist-to-height ratio in assessing the status of central obesity and related cardiometabolic risk profile among normal weight and overweight/obese children: The Bogalusa Heart Study

Directory of Open Access Journals (Sweden)

Xu Jihua

2010-10-01

Full Text Available Abstract Background Body Mass Index (BMI is widely used to assess the impact of obesity on cardiometabolic risk in children but it does not always relate to central obesity and varies with growth and maturation. Waist-to-Height Ratio (WHtR is a relatively constant anthropometric index of abdominal obesity across different age, sex or racial groups. However, information is scant on the utility of WHtR in assessing the status of abdominal obesity and related cardiometabolic risk profile among normal weight and overweight/obese children, categorized according to the accepted BMI threshold values. Methods Cross-sectional cardiometabolic risk factor variables on 3091 black and white children (56% white, 50% male, 4-18 years of age were used. Based on the age-, race- and sex-specific percentiles of BMI, the children were classified as normal weight (5th - 85th percentiles and overweight/obese (≥ 85th percentile. The risk profiles of each group based on the WHtR ( Results 9.2% of the children in the normal weight group were centrally obese (WHtR ≥0.5 and 19.8% among the overweight/obese were not (WHtR Conclusion WHtR not only detects central obesity and related adverse cardiometabolic risk among normal weight children, but also identifies those without such conditions among the overweight/obese children, which has implications for pediatric primary care practice.

Prevalence of stress references on college freshmen Facebook profiles.

Science.gov (United States)

Egan, Katie G; Moreno, Megan A

2011-10-01

Stress is common among college students and associated with adverse health outcomes. This study used the social networking Web site Facebook to identify self-reported stress and associated conditions among college students. Public Facebook profiles of undergraduate freshman at a large Midwestern State University (n = 300) were identified using a Facebook search. Content analysis of Facebook profiles included demographic information and displayed references to stress, weight concerns, depressive symptoms, and alcohol. The mean reported age was 18.4 years, and the majority of profile owners were female (62%). Stress references were displayed on 37% of the profiles, weight concerns on 6%, depressive symptoms on 24%, and alcohol on 73%. The display of stress references was associated with female sex (odds ratio [OR], 2.81; confidence interval [CI], 1.7-4.7), weight concerns (OR, 5.36; CI, 1.87-15.34), and depressive symptoms (OR, 2.7; CI, 1.57-4.63). No associations were found between stress and alcohol references. College freshmen frequently display references to stress on Facebook profiles with prevalence rates similar to self-reported national survey data. Findings suggest a positive association between referencing stress and both weight concerns and depressive symptoms. Facebook may be a useful venue to identify students at risk for stress-related conditions and to disseminate information about campus resources to these students.

Experienced Poor Lighting Contributes to the Seasonal Fluctuations in Weight and Appetite That Relate to the Metabolic Syndrome

Directory of Open Access Journals (Sweden)

Sharon Grimaldi

2009-01-01

Full Text Available We tested which environmental, social, lifestyle, and health related factors of the individual contribute to the seasonal variations in mood and behavior and whether these influence the risks of the metabolic syndrome and major depressive disorder, both conditions having a high prevalence in industrialized populations. 5480 individuals, representative of the general population aged 30 and over in Finland, were assessed for metabolic syndrome using the ATP-III criteria, gave a self-report of seasonal variations in mood and behavior, and were interviewed for mood, anxiety, and alcohol use disorders using the DSM-IV criteria. The seasonal variations in mood and behavior have a metabolic factor composed of weight and appetite, and greater loadings on this factor increased the risk of metabolic syndrome (odds ratio of 1.18, 95% confidence interval of 1.10 to 1.26. Self-reports of lighting experienced as poor at home contributed to scores on the metabolic factor (t=4.20,P<.0001. Lighting conditions and their dynamics may serve as a measure for intervention in order to influence the seasonal metabolic signals and in the end to prevent the metabolic syndrome.

Experienced Poor Lighting Contributes to the Seasonal Fluctuations in Weight and Appetite That Relate to the Metabolic Syndrome

International Nuclear Information System (INIS)

Grimaldi, S.; Englund, A.; Partonen, T.

2010-01-01

We tested which environmental, social, lifestyle, and health related factors of the individual contribute to the seasonal variations in mood and behavior and whether these influence the risks of the metabolic syndrome and major depressive disorder, both conditions having a high prevalence in industrialized populations. 5480 individuals, representative of the general population aged 30 and over in Finland, were assessed for metabolic syndrome using the ATP-III criteria, gave a self-report of seasonal variations in mood and behavior, and were interviewed for mood, anxiety, and alcohol use disorders using the DSM-IV criteria. The seasonal variations in mood and behavior have a metabolic factor composed of weight and appetite, and greater loadings on this factor increased the risk of metabolic syndrome (odds ratio of 1.18, 95% confidence interval of 1.10 to 1.26). Self-reports of lighting experienced as poor at home contributed to scores on the metabolic factor (t=4.20,P<.0001). Lighting conditions and their dynamics may serve as a measure for intervention in order to influence the seasonal metabolic signals and in the end to prevent the metabolic syndrome.

Weighted straight skeletons in the plane.

Science.gov (United States)

Biedl, Therese; Held, Martin; Huber, Stefan; Kaaser, Dominik; Palfrader, Peter

2015-02-01

We investigate weighted straight skeletons from a geometric, graph-theoretical, and combinatorial point of view. We start with a thorough definition and shed light on some ambiguity issues in the procedural definition. We investigate the geometry, combinatorics, and topology of faces and the roof model, and we discuss in which cases a weighted straight skeleton is connected. Finally, we show that the weighted straight skeleton of even a simple polygon may be non-planar and may contain cycles, and we discuss under which restrictions on the weights and/or the input polygon the weighted straight skeleton still behaves similar to its unweighted counterpart. In particular, we obtain a non-procedural description and a linear-time construction algorithm for the straight skeleton of strictly convex polygons with arbitrary weights.

Dependence of light scattering profile in tissue on blood vessel diameter and distribution: a computer simulation study.

Science.gov (United States)

Duadi, Hamootal; Fixler, Dror; Popovtzer, Rachela

2013-11-01

Most methods for measuring light-tissue interactions focus on the volume reflectance while very few measure the transmission. We investigate both diffusion reflection and diffuse transmission at all exit angles to receive the full scattering profile. We also investigate the influence of blood vessel diameter on the scattering profile of a circular tissue. The photon propagation path at a wavelength of 850 nm is calculated from the absorption and scattering constants via Monte Carlo simulation. Several simulations are performed where a different vessel diameter and location were chosen but the blood volume was kept constant. The fraction of photons exiting the tissue at several central angles is presented for each vessel diameter. The main result is that there is a central angle that below which the photon transmission decreased for lower vessel diameters while above this angle the opposite occurred. We find this central angle to be 135 deg for a two-dimensional 10-mm diameter circular tissue cross-section containing blood vessels. These findings can be useful for monitoring blood perfusion and oxygen delivery in the ear lobe and pinched tissues. © 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)

The effect of dietary prebiotics and probiotics on body weight, large intestine indices, and fecal bile acid profile in wild type and IL10-/- mice.

Directory of Open Access Journals (Sweden)

Shiu-Ming Kuo

Full Text Available Previous studies have suggested roles of probiotics and prebiotics on body weight management and intestinal function. Here, the effects of a dietary prebiotic, inulin (50 mg/g diet, and probiotic, Bfidobacterium animalis subsp. lactis (Bb12 (final dose verified at 10(5 colony forming unit (cfu/g diet, comparable to human consumption, were determined separately and in combination in mice using cellulose-based AIN-93G diets under conditions allowed for the growth of commensal bacteria. Continuous consumption of Bb12 and/or inulin did not affect food intake or body, liver, and spleen weights of young and adult mice. Fecal bile acid profiles were determined by nanoESI-MS/MS tandem mass spectrometry. In the presence of inulin, more bacterial deconjugation of taurine from primary bile acids was observed along with an increased cecal weight. Consumption of inulin in the absence or presence of Bb12 also increased the villus cell height in the proximal colon along with a trend of higher bile acid sulfation by intestinal cells. Feeding Bb12 alone at the physiological dose did not affect bile acid deconjugation and had little effect on other intestinal indices. Although interleukin (IL10-null mice are susceptible to enterocolitis, they maintained the same body weight as the wild type mice under our specific pathogen-free housing condition and showed no signs of inflammation. Nevertheless, they had smaller cecum suggesting a mildly compromised intestinal development even before the disease manifestation. Our results are consistent with the notion that dietary factors such as prebiotics play important roles in the growth of intestinal microbiota and may impact on the intestinal health. In addition, fecal bile acid profiling could potentially be a non-invasive tool in monitoring the intestinal environment.

Persistent weight loss with a non-invasive novel medical device to change eating behaviour in obese individuals with high-risk cardiovascular risk profile.

Directory of Open Access Journals (Sweden)

Peter von Seck

Full Text Available In evidence-based weight-loss programs weight regain is common after an initial weight reduction. Eating slowly significantly lowers meal energy intake and hunger ratings. Despite this knowledge, obese individuals do not implement this behaviour. We, thus tested the hypothesis of changing eating behaviour with an intra-oral medical device leading to constant weight reduction in overweight and obesity. Six obese patients (6 men, age 56 ± 14, BMI 29 ± 2 kg / m2 with increased CVRF profile were included in this prospective study. All patients had been treated for obesity during the last 10 years in a single centre and had at least 3 frustrate evidence-based diets. Patients received a novel non-invasive intra-oral medical device to slow eating time. Further advice included not to count calories, to avoid any other form of diet, to take their time with their meals, and to eat whatever they liked. This device was used only during meals for the first 4 to 8 weeks for a total of 88 [20-160] hours. Follow-up period was 23 [15-38] months. During this period, patients lost 11% [5-20%] (p5%, and 67% (4/6 achieved a >10% bodyweight loss. In the course of the study, altered eating patterns were observed. There were no complications with the medical device. Of note, all patients continued to lose weight after the initial intervention period (p<0.001 and none of them had weight regain. With this medical device, overweight and obese patients with a history of previously frustrating attempts to lose weight achieved a significant and sustained weight loss over two years. These results warrant the ongoing prospective randomised controlled trial to prove concept and mechanism of action.German Clinical Trials Register DRKS00011357.

Physical activity profiles of U.S. adults trying to lose weight: NHIS 1998.

Science.gov (United States)

Kruger, Judy; Galuska, Deborah A; Serdula, Mary K; Kohl, Harold W

2005-03-01

Physical activity is an integral part of weight control programs, but recommended amounts vary. The objectives of this study were to describe the prevalence and characteristics of those who reported using exercise as a weight loss strategy (N=14,716), and to determine the prevalence of meeting various institutionally recommended levels of physical activity (N=8538) among that population. Data were obtained from the 1998 National Health Interview Survey, a face-to-face nationally representative household interview. Questions on leisure-time physical activity were analyzed using SUDAAN. Among those who reported trying to lose weight, 55% reported using exercise as a weight loss strategy alone, and of those, 58% reported eating fewer calories. The prevalence of using exercise as a weight loss strategy was directly associated with education and inversely associated with age and body mass index. Among those who reported using exercise as a weight loss strategy, 57% met the minimal 1998 National Institutes of Health recommendation of >or=150 min.wk; 46% met the lower end of the 2001 American College of Sports Medicine recommendation of 200 min.wk; and 30% met the upper end for 300 min.wk. Only 19% met the 2002 Institute of Medicine recommendation of 420 min.wk. Despite the importance of physical activity in a weight loss program, only about half of the persons trying to lose weight reported using exercise. Even among those, only slightly more than half met the minimal recommendations for physical activity. Efforts are needed to aid those trying to lose weight to incorporate appropriate levels of physical activity into their weight loss strategy.

Light impurity transport in JET ILW L-mode plasmas

Science.gov (United States)

Bonanomi, N.; Mantica, P.; Giroud, C.; Angioni, C.; Manas, P.; Menmuir, S.; Contributors, JET

2018-03-01

A series of experimental observations of light impurity profiles was carried out in JET (Joint European Torus) ITER-like wall (ILW) L-mode plasmas in order to investigate their transport mechanisms. These discharges feature the presence of 3He, Be, C, N, Ne, whose profiles measured by active Charge Exchange diagnostics are compared with quasi-linear and non-linear gyro-kinetic simulations. The peaking of 3He density follows the electron density peaking, Be and Ne are also peaked, while the density profiles of C and N are flat in the mid plasma region. Gyro-kinetic simulations predict peaked density profiles for all the light impurities studied and at all the radial positions considered, and fail predicting the flat or hollow profiles observed for C and N at mid radius in our cases.

Fatty Acids Profile of Intramuscular Fat in Light Lambs Traditionally and Artificially Reared

Directory of Open Access Journals (Sweden)

Milan MARGETÍN

2014-03-01

Full Text Available The quality of 40 carcasses of light lambs of the synthetic population of Slovak Dairy sheep from (a artificial rearing (AR and (b traditional rearing (TR was assessed on the basis of fatty acids profile of intramuscular fat (IMF. Lambs from AR in comparison with TR were of lower quality as assessed on the basis of fatty acids (FAs profile. The content of conjugated linolic acid (CLA in the fat of TR lambs was severalfold higher (0.749 vs. 0.193 g.100g-1 FAME, P<0.001 than in AR lambs. Similarly, the content of trans-vaccenic (TVA, á-linolenic (ALA, rumenic (RA, eicosapentaenoic (EPA and docosahexaenoic acid (DHA was in TR lambs significantly higher (P<0.001 than in AR lambs (0.955 vs. 0.111; 0.715 vs. 0.251; 0.672 vs. 0.148; 0.352 vs. 0.061; 0.252 vs. 0.079 g.100g-1 FAME. In contrary, the content of linoleic acid (LA, the ratio of LA/ALA and n-6/n-3 in AR lambs was higher than in TR lambs (9.07 vs. 4.81 g.100 g-1 FAME; 39.11 vs. 6.80; 14.56 vs. 3.25, P<0.001. In TR lambs the content of n-3 PUFA and BCFA was significantly higher (P<0.001 than in AR lambs (2.08 vs. 0.84 and 1.95 vs. 0.45. The value of thrombogenic index was higher in AR lambs in comparison with TR lambs (1.44 vs. 1.31; P<0.05. Significant differences between FAs of IMF of ram lambs and ewe lambs were observed only in the case of arachidonic acid (P<0.05.

Low-molecular-weight heparins: pharmacologic profile and product differentiation.

Science.gov (United States)

Fareed, J; Jeske, W; Hoppensteadt, D; Clarizio, R; Walenga, J M

1998-09-10

The interchangeability of low-molecular-weight heparins (LMWHs) has been the subject of discussion since these products were first introduced for the prophylaxis of deep vein thrombosis. Experimental evidence now exists to show that LMWHs differ from each other in a number of characteristics. Products have been differentiated on the basis of molecular weight and biologic properties, but only limited information derived from the clinical setting is available. Potency has been described on the basis of anti-Factor Xa activity, but at equivalent anti-Xa activities, the anti-Factor IIa activity of different products shows marked variations. At the relatively small doses used for the management of postsurgical deep vein thrombosis, the effect of these interproduct differences may be relatively minor, but as LMWHs are developed for therapeutic use at much higher doses, such differences may become clinically important. Variations in safety and efficacy reported in clinical trials of LMWHs may reflect the known differences in their molecular composition and pharmacologic properties.

Development and evaluation of a light-emitting diode endoscopic light source

Science.gov (United States)

Clancy, Neil T.; Li, Rui; Rogers, Kevin; Driscoll, Paul; Excel, Peter; Yandle, Ron; Hanna, George; Copner, Nigel; Elson, Daniel S.

2012-03-01

Light-emitting diode (LED) based endoscopic illumination devices have been shown to have several benefits over arclamp systems. LEDs are energy-efficient, small, durable, and inexpensive, however their use in endoscopy has been limited by the difficulty in efficiently coupling enough light into the endoscopic light cable. We have demonstrated a highly homogenised lightpipe LED light source that combines the light from four Luminus LEDs emitting in the red, green, blue and violet using innovative dichroics that maximise light throughput. The light source spectrally combines light from highly divergent incoherent sources that have a Lambertian intensity profile to provide illumination matched to the acceptance numerical aperture of a liquid light guide or fibre bundle. The LED light source was coupled to a standard laparoscope and performance parameters (power, luminance, colour temperature) compared to a xenon lamp. Although the total illuminance from the endoscope was lower, adjustment of the LEDs' relative intensities enabled contrast enhancement in biological tissue imaging. The LED light engine was also evaluated in a minimally invasive surgery (MIS) box trainer and in vivo during a porcine MIS procedure where it was used to generate 'narrowband' images. Future work using the violet LED could enable photodynamic diagnosis of bladder cancer.

Changes in glucose-elicited blood metabolite responses following weight loss and long term weight maintenance in obese individuals with impaired glucose tolerance.

Science.gov (United States)

Geidenstam, Nina; Danielsson, Anders P H; Spégel, Peter; Ridderstråle, Martin

2016-03-01

Weight loss improves insulin sensitivity and glucose tolerance in obese subjects with impaired glucose tolerance (IGT), but the long term dynamic effects on blood metabolites other than glucose during an oral glucose tolerance test (OGTT), are largely unknown. Here, we studied changes in OGTT-elicited metabolite patterns in obese subjects during a diet-induced weight loss study. Blood samples from 14 obese individuals with IGT were collected at 0, 30 and 120 min during a standard 75 g OGTT at baseline (BMI 44 ± 2 kg/m(2)), after weight loss (BMI 36 ± 2 kg/m(2)) and after weight maintenance (BMI 35 ± 2 kg/m(2)). Serum metabolite levels were analyzed by gas chromatography/mass spectrometry and compared to a lean glucose tolerant group. Changes in the OGTT-elicited metabolite patterns occurred differentially during weight loss and weight maintenance. Enhanced suppression of aromatic amino acids were associated with decreased insulinogenic index observed after weight loss (tyrosine: r=0.72, p=0.013; phenylalanine: r=0.63, p=0.039). The OGTT-elicited suppression and/or lack of increase in levels of glutamate, glutamine, isoleucine, leucine, and the fatty acids laurate, oleate and palmitate, improved towards the lean profile after weight maintenance, paralleling an improvement in glucose tolerance. The greater heterogeneity in the response before and after weight loss in the obese, compared to lean subjects, was markedly reduced after weight maintenance. Diet-induced weight loss followed by weight maintenance results in changes in metabolite profiles associated with either hepatic insulin sensitivity or peripheral glucose tolerance. Our results highlight the importance of evaluating the effects of weight loss and weight maintenance separately. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Implantable electronics: emerging design issues and an ultra light-weight security solution.

Science.gov (United States)

Narasimhan, Seetharam; Wang, Xinmu; Bhunia, Swarup

2010-01-01

Implantable systems that monitor biological signals require increasingly complex digital signal processing (DSP) electronics for real-time in-situ analysis and compression of the recorded signals. While it is well-known that such signal processing hardware needs to be implemented under tight area and power constraints, new design requirements emerge with their increasing complexity. Use of nanoscale technology shows tremendous benefits in implementing these advanced circuits due to dramatic improvement in integration density and power dissipation per operation. However, it also brings in new challenges such as reliability and large idle power (due to higher leakage current). Besides, programmability of the device as well as security of the recorded information are rapidly becoming major design considerations of such systems. In this paper, we analyze the emerging issues associated with the design of the DSP unit in an implantable system. Next, we propose a novel ultra light-weight solution to address the information security issue. Unlike the conventional information security approaches like data encryption, which come at large area and power overhead and hence are not amenable for resource-constrained implantable systems, we propose a multilevel key-based scrambling algorithm, which exploits the nature of the biological signal to effectively obfuscate it. Analysis of the proposed algorithm in the context of neural signal processing and its hardware implementation shows that we can achieve high level of security with ∼ 13X lower power and ∼ 5X lower area overhead than conventional cryptographic solutions.

N-of-1 study of weight loss maintenance assessing predictors of physical activity, adherence to weight loss plan and weight change.

Science.gov (United States)

Kwasnicka, Dominika; Dombrowski, Stephan U; White, Martin; Sniehotta, Falko F

2017-06-01

Behaviour change interventions are effective in supporting individuals to achieve clinically significant weight loss, but weight loss maintenance (WLM) is less often attained. This study examined predictive variables associated with WLM. N-of-1 study with daily ecological momentary assessment combined with objective measurement of weight and physical activity, collected with wireless devices (Fitbit™) for six months. Eight previously obese adults who had lost over 5% of their body weight in the past year took part. Data were analysed using time series methods. Predictor variables were based on five theoretical themes: maintenance motives, self-regulation, personal resources, habits, and environmental influences. Dependent variables were: objectively estimated step count and weight, and self-reported WLM plan adherence. For all participants, daily fluctuations in self-reported adherence to their WLM plan were significantly associated with most of the explanatory variables, including maintenance motivation and satisfaction with outcomes, self-regulation, habit, and stable environment. Personal resources were not a consistent predictor of plan adherence. This is the first study to assess theoretical predictions of WLM within individuals. WLM is a dynamic process including the interplay of motivation, self-regulation, habit, resources, and perceptions of environmental context. Individuals maintaining their weight have unique psychological profiles which could be accounted for in interventions.

Qualitative Beam Profiling of Light Curing Units for Resin Based Composites.

Science.gov (United States)

Haenel, Thomas; Hausnerová, Berenika; Steinhaus, Johannes; Moeginger, Ing Bernhard

2016-12-01

This study investigates two technically simple methods to determine the irradiance distribution of light curing units that governs the performance of a visible-light curing resin-based composites. Insufficient light irradiation leads to under-cured composites with poor mechanical properties and elution of residual monomers. The unknown irradiance distribution and its effect on the final restoration are the main critical issues requiring highly sophisticated experimental equipment. The study shows that irradiance distributions of LCUs can easily be determined qualitatively with generally available equipment. This significantly helps dentists in practices to be informed about the homogeneity of the curing lights. Copyright© 2016 Dennis Barber Ltd.

Epidemic spreading on weighted complex networks

International Nuclear Information System (INIS)

Sun, Ye; Liu, Chuang; Zhang, Chu-Xu; Zhang, Zi-Ke

2014-01-01

Nowadays, the emergence of online services provides various multi-relation information to support the comprehensive understanding of the epidemic spreading process. In this Letter, we consider the edge weights to represent such multi-role relations. In addition, we perform detailed analysis of two representative metrics, outbreak threshold and epidemic prevalence, on SIS and SIR models. Both theoretical and simulation results find good agreements with each other. Furthermore, experiments show that, on fully mixed networks, the weight distribution on edges would not affect the epidemic results once the average weight of whole network is fixed. This work may shed some light on the in-depth understanding of epidemic spreading on multi-relation and weighted networks.

Epidemic spreading on weighted complex networks

Energy Technology Data Exchange (ETDEWEB)

Sun, Ye [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Liu, Chuang, E-mail: liuchuang@hznu.edu.cn [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Zhang, Chu-Xu [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China); Zhang, Zi-Ke, E-mail: zhangzike@gmail.com [Institute of Information Economy, Hangzhou Normal University, Hangzhou 311121 (China); Alibaba Research Center of Complexity Science, Hangzhou Normal University, Hangzhou 311121 (China)

2014-01-31

Nowadays, the emergence of online services provides various multi-relation information to support the comprehensive understanding of the epidemic spreading process. In this Letter, we consider the edge weights to represent such multi-role relations. In addition, we perform detailed analysis of two representative metrics, outbreak threshold and epidemic prevalence, on SIS and SIR models. Both theoretical and simulation results find good agreements with each other. Furthermore, experiments show that, on fully mixed networks, the weight distribution on edges would not affect the epidemic results once the average weight of whole network is fixed. This work may shed some light on the in-depth understanding of epidemic spreading on multi-relation and weighted networks.

The Exposure Effects of Online Model Pictures and Weight-Related Persuasive Messages on Women's Weight-Loss Planned Behaviors.

Science.gov (United States)

Pan, Wenjing; Peña, Jorge

2017-10-01

This study examined how exposure to pictures of women with different body sizes (thin, obese), physical attractiveness levels (attractive, unattractive), along with exposure to weight-related messages (pro-anorexia, anti-anorexia) embedded in a fashion website affected female participants' planned behavior toward weight loss. Participants exposed to attractive model pictures showed higher intentions, attitudes, and subjective norms to lose weight compared with unattractive models. Additionally, participants exposed to thin and attractive model pictures indicated the highest attitudes and self-efficacy to lose weight, whereas those exposed to thin and unattractive model pictures indicated the lowest. Furthermore, weight-related messages moderated the effect of model appearance (body size and attractiveness) on controllability of weight-loss activities. However, website pictures' body size differences had no main effects on planned behavior toward weight loss. These effects are discussed in the light of social comparison mechanisms.

Profile updating for information systems

International Nuclear Information System (INIS)

Abrantes, J.F.

1983-02-01

Profiles updating methods were analysed. A method suitable to the characteristics of the system used in the research (SDI/CIN/CNEN) that uses as the selection criterio the threshold and weights criterion, was determined. Relevance weighting theory was described and experiments to verify precision were carried out. The improvements obtained were good nevertheless more significant tests are required to attain more reliable results. (Author) [pt

Post-bariatric surgery weight regain: evaluation of nutritional profile of candidate patients for endoscopic argon plasma coagulation.

Science.gov (United States)

Cambi, Maria Paula Carlini; Marchesini, Simone Dallegrave; Baretta, Giorgio Alfredo Pedroso

2015-01-01

Bariatric surgery is effective treatment for weight loss, but demand continuous nutritional care and physical activity. They regain weight happens with inadequate diets, physical inactivity and high alcohol consumption. To investigate in patients undergoing Roux-Y-of gastroplasty weight regain, nutritional deficiencies, candidates for the treatment with endoscopic argon plasma, the diameter of the gastrojejunostomy and the size of the gastric pouch at the time of treatment with plasma. A prospective 59 patients non-randomized study with no control group undergoing gastroplasty with recurrence of weight and candidates for the endoscopic procedure of argon plasma was realized. The surgical evaluation consisted of investigation of complications in the digestive system and verification of the increased diameter of the gastrojejunostomy. Nutritional evaluation was based on body mass index at the time of operation, in the minimum BMI achieved after and in which BMI was when making the procedure with plasma. The laboratory tests included hemoglobin, erythrocyte volume, ferritin, vitamin D, B12, iron, calcium, zinc and serum albumin. Clinical analysis was based on scheduled follow-up. Of the 59 selected, five were men and 51 women; were included 49 people (four men and 44 women) with all the complete data. The exclusion was due to the lack of some of the laboratory tests. Of this total 19 patients (38.7%) had a restrictive ring, while 30 (61.2%) did not. Iron deficiency anemia was common; 30 patients (61.2%) were below 30 with ferritin (unit); 35 (71.4%) with vitamin B12 were below 300 pg/ml; vitamin D3 deficiency occurred in more than 90%; there were no cases of deficiency of protein, calcium and zinc; glucose levels were above 99 mg/dl in three patients (6.12%). Clinically all had complaints of labile memory, irritability and poor concentration. All reported that they stopped treatment with the multidisciplinary team in the first year after the operation. The profile of

Ni Nanobuffer Layer Provides Light-Weight CNT/Cu Fibers with Superior Robustness, Conductivity, and Ampacity.

Science.gov (United States)

Zou, Jingyun; Liu, Dandan; Zhao, Jingna; Hou, Ligan; Liu, Tong; Zhang, Xiaohua; Zhao, Yonghao; Zhu, Yuntian T; Li, Qingwen

2018-03-07

Carbon nanotube (CNT) fiber has not shown its advantage as next-generation light-weight conductor due to the large contact resistance between CNTs, as reflected by its low conductivity and ampacity. Coating CNT fiber with a metal layer like Cu has become an effective solution to this problem. However, the weak CNT-Cu interfacial bonding significantly limits the mechanical and electrical performances. Here, we report that a strong CNT-Cu interface can be formed by introducing a Ni nanobuffer layer before depositing the Cu layer. The Ni nanobuffer layer remarkably promotes the load and heat transfer efficiencies between the CNT fiber and Cu layer and improves the quality of the deposited Cu layer. As a result, the new composite fiber with a 2 μm thick Cu layer can exhibit a superhigh effective strength >800 MPa, electrical conductivity >2 × 10 7 S/m, and ampacity >1 × 10 5 A/cm 2 . The composite fiber can also sustain 10 000 times of bending and continuously work for 100 h at 90% ampacity.

M2Lite: An Open-source, Light-weight, Pluggable and Fast Proteome Discoverer MSF to mzIdentML Tool.

Science.gov (United States)

Aiyetan, Paul; Zhang, Bai; Chen, Lily; Zhang, Zhen; Zhang, Hui

2014-04-28

Proteome Discoverer is one of many tools used for protein database search and peptide to spectrum assignment in mass spectrometry-based proteomics. However, the inadequacy of conversion tools makes it challenging to compare and integrate its results to those of other analytical tools. Here we present M2Lite, an open-source, light-weight, easily pluggable and fast conversion tool. M2Lite converts proteome discoverer derived MSF files to the proteomics community defined standard - the mzIdentML file format. M2Lite's source code is available as open-source at https://bitbucket.org/paiyetan/m2lite/src and its compiled binaries and documentation can be freely downloaded at https://bitbucket.org/paiyetan/m2lite/downloads.

Morning and Evening Blue-Enriched Light Exposure Alters Metabolic Function in Normal Weight Adults.

Directory of Open Access Journals (Sweden)

Ivy N Cheung

Full Text Available Increasing evidence points to associations between light-dark exposure patterns, feeding behavior, and metabolism. This study aimed to determine the acute effects of 3 hours of morning versus evening blue-enriched light exposure compared to dim light on hunger, metabolic function, and physiological arousal. Nineteen healthy adults completed this 4-day inpatient protocol under dim light conditions (<20lux. Participants were randomized to 3 hours of blue-enriched light exposure on Day 3 starting either 0.5 hours after wake (n = 9; morning group or 10.5 hours after wake (n = 10; evening group. All participants remained in dim light on Day 2 to serve as their baseline. Subjective hunger and sleepiness scales were collected hourly. Blood was sampled at 30-minute intervals for 4 hours in association with the light exposure period for glucose, insulin, cortisol, leptin, and ghrelin. Homeostatic model assessment of insulin resistance (HOMA-IR and area under the curve (AUC for insulin, glucose, HOMA-IR and cortisol were calculated. Comparisons relative to baseline were done using t-tests and repeated measures ANOVAs. In both the morning and evening groups, insulin total area, HOMA-IR, and HOMA-IR AUC were increased and subjective sleepiness was reduced with blue-enriched light compared to dim light. The evening group, but not the morning group, had significantly higher glucose peak value during blue-enriched light exposure compared to dim light. There were no other significant differences between the morning or the evening groups in response to blue-enriched light exposure. Blue-enriched light exposure acutely alters glucose metabolism and sleepiness, however the mechanisms behind this relationship and its impacts on hunger and appetite regulation remain unclear. These results provide further support for a role of environmental light exposure in the regulation of metabolism.

AutoLens: Automated Modeling of a Strong Lens's Light, Mass and Source

Science.gov (United States)

Nightingale, J. W.; Dye, S.; Massey, Richard J.

2018-05-01

This work presents AutoLens, the first entirely automated modeling suite for the analysis of galaxy-scale strong gravitational lenses. AutoLens simultaneously models the lens galaxy's light and mass whilst reconstructing the extended source galaxy on an adaptive pixel-grid. The method's approach to source-plane discretization is amorphous, adapting its clustering and regularization to the intrinsic properties of the lensed source. The lens's light is fitted using a superposition of Sersic functions, allowing AutoLens to cleanly deblend its light from the source. Single component mass models representing the lens's total mass density profile are demonstrated, which in conjunction with light modeling can detect central images using a centrally cored profile. Decomposed mass modeling is also shown, which can fully decouple a lens's light and dark matter and determine whether the two component are geometrically aligned. The complexity of the light and mass models are automatically chosen via Bayesian model comparison. These steps form AutoLens's automated analysis pipeline, such that all results in this work are generated without any user-intervention. This is rigorously tested on a large suite of simulated images, assessing its performance on a broad range of lens profiles, source morphologies and lensing geometries. The method's performance is excellent, with accurate light, mass and source profiles inferred for data sets representative of both existing Hubble imaging and future Euclid wide-field observations.

Birth Weight does not Associate with Gestational Physical Activity ...

African Journals Online (AJOL)

Exercise during pregnancy has been a subject of debate and whether gestational physical activity profile affects birth weight is an important issue as birth weight is an indicator of fetal, neo-natal and post-natal mortality. This study was carried at three hospitals in Enugu, Eastern Nigeria to determine the difference between ...

Is it good to be too light? Birth weight thresholds in hospital reimbursement systems.

Science.gov (United States)

Reif, Simon; Wichert, Sebastian; Wuppermann, Amelie

2018-02-02

Birth weight manipulation has been documented in per-case hospital reimbursement systems, in which hospitals receive more money for otherwise equal newborns with birth weight just below compared to just above specific birth weight thresholds. As hospitals receive more money for cases with weight below the thresholds, having a (reported) weight below a threshold could benefit the newborn. Also, these reimbursement thresholds overlap with diagnostic thresholds that have been shown to affect the quantity and quality of care that newborns receive. Based on the universe of hospital births in Germany from the years 2005-2011, we investigate whether weight below reimbursement relevant thresholds triggers different quantity and quality of care. We find that this is not the case, suggesting that hospitals' financial incentives with respect to birth weight do not directly impact the care that newborns receive. Copyright © 2018 Elsevier B.V. All rights reserved.

Weight reduction with improvement of serum lipid profile and ratios ...

African Journals Online (AJOL)

SERVER

2007-11-05

Nov 5, 2007 ... assessing the impact of sesame treatment with evidence of weight loss and hypolipidaemia .... using a MSE tabletop centrifuge machine (Minor Gallenkamp). The ... showed the presence of essential oils mainly the carbo-.

Beta Instability and Stochastic Market Weights

OpenAIRE

David H. Goldenberg

1985-01-01

An argument is given for individual firm beta instability based upon the stochastic character of the market weights defining the market portfolio and the constancy of its beta. This argument is generalized to market weighted portfolios and the form of the stochastic process generating betas is linked to that of the market return process. The implications of this analysis for adequacy of models of beta nonstationarity and estimation of betas are considered in light of the available empirical e...

Short communication: Sensory profile of raw goat milk cheeses made with artisan kid rennet pastes from commercial-weight animals: alternative to farmhouse goat cheeses.

Science.gov (United States)

Fresno, M; Álvarez, S; Díaz, E; Virto, M; de Renobales, M

2014-10-01

The loss of traditional kid rennet pastes in the Canary Islands (Spain), as in many other regions, is most likely due to the custom of using abomasa from very young animals killed below desirable commercial weight. In addition, the reasonable price of commercial rennets (CR) has resulted in the loss of typical sensory characteristics for most farmhouse raw goat milk cheeses, placing them at a disadvantage when local and international markets are full of different cheeses, often with aggressive marketing strategies. This paper analyzes the sensory characteristics of raw goat milk cheeses made with rennet pastes prepared from commercial kid abomasa in 2 ways: dried while full of ingested milk [full, commercial, artisan kid rennet (FCKR)], or dried after being emptied of ingested milk and refilled with raw goat milk [empty, commercial, artisan kid rennet (ECKR)]. This latter practice allows the use of empty abomasa, or abomasa with grass, soil, and so on. Sensory profiles of cheeses made with FCKR and ECKR rennets were compared with those made with CR by an expert panel (n=7). The FCKR and ECKR cheeses had similar sensory profiles. Although scores for FCKR cheeses were somewhat higher than for ECKR cheeses, they were in the range found for traditional cheeses made with rennet prepared with abomasa from very young animals. The sensory profile of CR cheeses was very different. Almost 90% of consumer panelists (n=90) preferred cheeses made with the experimental rennet pastes. These results demonstrate the possibility to prepare artisan rennet pastes from commercial-weight kids in an easy way for farmhouse cheese makers using local resources that would otherwise be destroyed in abattoirs. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Beam profile monitors in the NLCTA

International Nuclear Information System (INIS)

Nantista, C.; Adolphsen, C.; Brown, R.L.; Fuller, R.; Rifkin, J.

1997-05-01

The transverse current profile in the Next Linear Collider Test Accelerator (NLCTA) electron beam can be monitored at several locations along the beam line by means of profile monitors. These consist of insertable phosphor screens, light collection and transport systems, CID cameras, a frame-grabber, and PC and VAX based image analysis software. In addition to their usefulness in tuning and steering the accelerator, the profile monitors are utilized for emittance measurement. A description of these systems and their performance is presented

Massive weight loss restores 24-hour growth hormone release profiles and serum insulin-like growth factor-I levels in obese subjects

DEFF Research Database (Denmark)

Rasmussen, M H; Hvidberg, A; Juul, A

1995-01-01

levels of insulin-like growth factor-I (IGF-I), IGF-binding protein-3 (IGFBP-3), as well as insulin in obese subjects before and after a massive weight loss. We studied 18 obese subjects (age, 26 +/- 1 yr; body mass index, 40.9 +/- 1.1 kg/m2); 18 normal age-, and sex-matched control subjects; and 9...... using anthropometric measurements and dual energy x-ray absorptiometry scanning (DXA). In the obese subjects, 24-h spontaneous GH release profiles and the GH responses to insulin-induced hypoglycemia and L-arginine as well as basal IGF-I levels and the IGF-I/IGFBP-3 molar ratio were decreased, whereas...

Weight Measurement Chitosan Molecule using GPC-MALLS

International Nuclear Information System (INIS)

Mohd Yusof Hamzah; Norhashidah Talip; Maznah Mahmud

2011-01-01

Research on basic characteristics and application of practical chitosan are need in order to understand their physical and chemical properties of this materials. One of the physico chemical properties that important for every polymers is absolute molecular weights. The important of this aspects has give big impacts on non colligative of the polymers, for example, viscosity, solubility and so on. Absolute weight molecular weights of each polymers can be measured by using GPC-MALLS. This device functioned as molecular size separator and molecular weight measurement by integration of the information such as sample concentration, light scattering index and sample reaction information using laser radiation irradiated from 18 angles.In this scope, we will discuss deeply on absolute weight molecular measurement of chitosan by using GPC-MALLS. (author)

Scaling laws for TEXT plasma profiles

International Nuclear Information System (INIS)

McCool, S.C.; Bravenec, R.V.; Chen, J.Y.; Foster, M.S.; Li, W.L.; Ouroura, A.; Phillips, P.E.; Richards, B.; Wenzel, K.W.; Zhang, Z.M.

1994-01-01

Regression analysis has been performed on a number of measured profiles including temperature and density vs. nominal macroscopic operating parameters for TEXT tokamak (pre-upgrade) ohmic plasmas. The resulting simple empirical model has enabled the authors to quickly approximate profiles of electron temperature and density, ion temperature, and soft x-ray brightness, as well as the scalar quantities: total radiated power, q=1 radius, sawtooth period and amplitude, and energy confinement time as a power law of toroidal field, plasma current, chord average density, and fueling gas atomic weight. The model profiles are only applicable to the plasma interior, i.e. within the limiter radius. In most cases the predicted model profiles are within the experimental error bars of measured profiles and are more accurate at predicting profile variation for small operating parameter changes than the measured profiles

Cell-centered particle weighting algorithm for PIC simulations in a non-uniform 2D axisymmetric mesh

Science.gov (United States)

Araki, Samuel J.; Wirz, Richard E.

2014-09-01

Standard area weighting methods for particle-in-cell simulations result in systematic errors on particle densities for a non-uniform mesh in cylindrical coordinates. These errors can be significantly reduced by using weighted cell volumes for density calculations. A detailed description on the corrected volume calculations and cell-centered weighting algorithm in a non-uniform mesh is provided. The simple formulas for the corrected volume can be used for any type of quadrilateral and/or triangular mesh in cylindrical coordinates. Density errors arising from the cell-centered weighting algorithm are computed for radial density profiles of uniform, linearly decreasing, and Bessel function in an adaptive Cartesian mesh and an unstructured mesh. For all the density profiles, it is shown that the weighting algorithm provides a significant improvement for density calculations. However, relatively large density errors may persist at outermost cells for monotonically decreasing density profiles. A further analysis has been performed to investigate the effect of the density errors in potential calculations, and it is shown that the error at the outermost cell does not propagate into the potential solution for the density profiles investigated.

Effect of solution temperature, light intensity and light in combination with sunlight using mirror duct on growth of leaf lettuce (Lactuca savtiva L. cv. 'Greenwave')

International Nuclear Information System (INIS)

Shimizu, H.; Kushida, M.; Fujinuma, W.; Sekine, M.; Kaiho, K.; Arai, H.; Shibusawa, S.

2004-01-01

Leaf lettuce crops (Lactuca sativa L. cv. 'Greenwave') were grown in a plant production system using a Mirror Duct which intensified sunlight and transferred it to the inside of buildings. This system was expected to reduce the operational energy and lighting cost. The experiments were conducted under four photosynthetic photon flux densities (PPF) of 140,160, 180, and 200 micro mol mE-2 sE-1, in two light conditions, fluorescent light only and fluorescent light plus sunlight transferred with the Mirror Duct, and were repeated five times in total from August 2002 to July 2003. Five different solution temperatures were finally obtained through all the experiments due to temperature changes inside the experiment facility. Variance was analyzed to estimate the effect of these environmental factors on the growth of leaf lettuce. It was found that the fresh weight of leaf lettuce increased as PPF increased and the rate of increase of weight was 0.6 to 1.0 g per unit PPF in both 17.4 deg C and 23.5 deg C solution temperatures; the solution temperature had a significant effect upon the fresh weight; and a difference in fresh weight at harvest of between 40 and 60 g was observed between 17.4 deg C and 23.5 deg C solution temperatures. The light containing 10% sunlight was not effective for increasing fresh weight at harvest compared to the fluorescent lamp

Light Weight Ceramic Ablators for Mars Follow-on Mission Vehicle Thermal Protection System

Science.gov (United States)

Tran, Huy K.; Rasky, Daniel J.; Hsu, Ming-Ta; Turan, Ryan

1994-01-01

New Light Weight Ceramic Ablators (LCA) were produced by using ceramic and carbon fibrous substrates, impregnated with silicone and phenolic resins. The special infiltration techniques (patent pending) were developed to control the amount of organic resins in the highly porous fiber matrices so that the final densities of LCA's range from 0.22 to 0.24 g/cc. This paper presents the thermal and ablative performance of the Silicone Impregnated Reusable Ceramic Ablators (SIRCA) in simulated entry conditions for Mars-Pathfinder in the Ames 60 MW Interaction Heating Facility (I HF). Arc jet test results yielded no evidence of char erosion and mass loss at high stagnation pressures to 0.25 atm. Minimal silica melt was detected on surface char at a stagnation pressure of 0.31 atm. Four ceramic substrates were used in the production of SIRCA's to obtain the effective of boron oxide present in substrate so the thermal performance of SIRCA's. A sample of SIRCA was also exposed to the same heating condition for five cycles and no significant mass loss or recession was observed. Tensile testing established that the SIRCA tensile strength is about a factor of two higher than that of the virgin substrates. Thermogravimetric Analysis (TGA) of the char in nitrogen and air showed no evidence of free carbon in the char. Scanning Electron Microscopy of the post test sample showed that the char surface consists of a fibrous structure that was sealed with a thin layer of silicon oxide melt.

[Therapeutic options for weight management in schizophrenic patients treated with atypical antipsychotics].

Science.gov (United States)

Cordes, J; Sinha-Röder, A; Kahl, K G; Malevani, J; Thuenker, J; Lange-Asschenfeldt, C; Hauner, H; Agelink, M W; Klimke, A

2008-12-01

Extensive, selective literature review of 2500 articles from the last years (up to December 2007) predominantly from Medline and Cochrane, using as search terms "antipsychotic or schizophrenia or individual drug names (amisulpride, aripiprazole, clozapine, olanzapine, quetiapine, risperidone, ziprasidone)" and the terms "BMI, weight gain, metabolic syndrome, diabetes, lipid(s), cholesterol, triglycerides" was conducted. Regardless of the advantages ascribed to atypical antipsychotics and the special effectiveness of clozapine in patients resistant to therapy and at risk for suicide, the probability of weight gain is considerably increased for some of these substances. Patients with schizophrenia have a considerably reduced life expectancy associated with an increased prevalence of cardiovascular risk factors. There is a lack of practical guidelines integrated into clinical psychiatric care for the management of cardiovascular risk factors. The monitoring of patients treated with atypics, which has been recommended in the APA/ADA Consensus Paper in light of these facts, is insufficiently established in clinical practice. A regular monitoring can convey self control and motivation to the patient. In the case of corresponding risk constellations further decisions regarding indication and therapy have to be considered. Especially patients with a high cardiovascular risk profile are highly recommended to participate in a weight-management program for prevention purposes. Such a special program should include elements of dietetic treatment and behaviour and exercise therapy. First controlled studies suggest an effective prevention of weight gain and metabolic changes when applying such a structured program. The practice oriented step by step concept presented here is meant to provide points of reference for the implementation of required medical and psychoeducative measures facilitating the management of weight and further cardiovascular risk factors in the context of

Low-molecular weight protein profiling of genetically modified maize using fast liquid chromatography electrospray ionization and time-of-flight mass spectrometry.

Science.gov (United States)

Koc, Anna; Cañuelo, Ana; Garcia-Reyes, Juan F; Molina-Diaz, Antonio; Trojanowicz, Marek

2012-06-01

In this work, the use of liquid chromatography coupled to electrospray time-of-flight mass spectrometry (LC-TOFMS) has been evaluated for the profiling of relatively low-molecular weight protein species in both genetically modified (GM) and non-GM maize. The proposed approach consisted of a straightforward sample fractionation with different water and ethanol-based buffer solutions followed by separation and detection of the protein species using liquid chromatography with a small particle size (1.8 μm) C(18) column and electrospray-time-of-flight mass spectrometry detection in the positive ionization mode. The fractionation of maize reference material containing different content of transgenic material (from 0 to 5% GM) led to five different fractions (albumins, globulins, zeins, zein-like glutelins, and glutelins), all of them containing different protein species (from 2 to 52 different species in each fraction). Some relevant differences in the quantity and types of protein species were observed in the different fractions of the reference material (with different GM contents) tested, thus revealing the potential use of the proposed approach for fast protein profiling and to detect tentative GMO markers in maize. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Weight gain and cardiovascular risk factors during smoking cessation with bupropion or nicotine.

Science.gov (United States)

Botella-Carretero, J I; Escobar-Morreale, H F; Martín, I; Valero, A M; Alvarez, F; García, G; Varela, C; Cantarero, M

2004-03-01

Weight gain is frequent after smoking cessation, and may limit patient's will to quit and long-term success. Nicotine and bupropion are effective drugs for smoking withdrawal. However, their influence on weight gain, insulin resistance and other cardiovascular risk factors, as well as possible differences in obese and lean subjects, have not been fully evaluated. We randomised 25 lean and 25 obese smokers to receive either bupropion or nicotine patches. Clinical evaluation and lipid profile were performed at baseline and after treatment. Insulin resistance was also assessed at the end. Weight, BMI, waist-to-hip ratio, and diastolic blood pressure increased (p < 0.005), whereas lipid profile improved (p < 0.001) after smoking cessation independently of obesity at baseline or drug used. Obese patients had higher insulin resistance at the end (p < 0.05) regardless of drug used. Weight gain was inversely related to age (beta= - 0.125, R = 0.38, p = 0.046), and insulin resistance was related to obesity at baseline (beta = 0.85, R = 0.46, p = 0.02). In conclusion, weight gain after smoking cessation is not dependent on obesity or drug taken. A beneficial lipid profile is achieved after quitting smoking with either bupropion or nicotine patch in both obese and lean subjects.

Study on Rail Profile Optimization Based on the Nonlinear Relationship between Profile and Wear Rate

Directory of Open Access Journals (Sweden)

Jianxi Wang

2017-01-01

Full Text Available This paper proposes a rail profile optimization method that takes account of wear rate within design cycle so as to minimize rail wear at the curve in heavy haul railway and extend the service life of rail. Taking rail wear rate as the object function, the vertical coordinate of rail profile at range optimization as independent variable, and the geometric characteristics and grinding depth of rail profile as constraint conditions, the support vector machine regression theory was used to fit the nonlinear relationship between rail profile and its wear rate. Then, the profile optimization model was built. Based on the optimization principle of genetic algorithm, the profile optimization model was solved to achieve the optimal rail profile. A multibody dynamics model was used to check the dynamic performance of carriage running on optimal rail profile. The result showed that the average relative error of support vector machine regression model remained less than 10% after a number of training processes. The dynamic performance of carriage running on optimized rail profile met the requirements on safety index and stability. The wear rate of optimized profile was lower than that of standard profile by 5.8%; the allowable carrying gross weight increased by 12.7%.

Study on design of light-weight super-abrasive wheel

Science.gov (United States)

Nohara, K.; Yanagihara, K.; Ogawa, M.

2018-01-01

Fixed-abrasive tool, also called a grinding wheel, is produced by furnacing abrasive compound which contains abrasive grains and binding powder such as vitrified materials or resins. Fixed-abrasive tool is installed on spindle of grinding machine. And it is given 1,800-2,000 min-1 of spindle rotation for the usage. The centrifugal fracture of the compound of fixed- abrasive tool is one of the careful respects in designing. In recent years, however, super-abrasive wheel as a fixed-abrasive tool has been developed and applied widely. One of the most characteristic respects is that metal is applied for the body of grinding-wheel. The strength to hold abrasive grain and the rigidity of wheel become stronger than those of general grinding wheel, also the lifespan of fixed-abrasive tool becomes longer. The weight of fixed-abrasive tool, however, becomes heavier. Therefore, when the super-abrasive wheel is used, the power consumption of spindle motor becomes larger. It also becomes difficult for the grinding-wheel to respond to sudden acceleration or deceleration. Thus, in order to reduce power consumption in grinding and to obtain quicker frequency response of super-abrasive wheel, the new wheel design is proposed. The design accomplishes 46% weight reduction. Acceleration that is one second quicker than that of conventional grinding wheel is obtained.

The acclimation of Phaeodactylum tricornutum to blue and red light does not influence the photosynthetic light reaction but strongly disturbs the carbon allocation pattern.

Directory of Open Access Journals (Sweden)

Anne Jungandreas

Full Text Available Diatoms are major contributors to the aquatic primary productivity and show an efficient acclimation ability to changing light intensities. Here, we investigated the acclimation of Phaeodactylum tricornutum to different light quality with respect to growth rate, photosynthesis rate, macromolecular composition and the metabolic profile by shifting the light quality from red light (RL to blue light (BL and vice versa. Our results show that cultures pre-acclimated to BL and RL exhibited similar growth performance, photosynthesis rates and metabolite profiles. However, light shift experiments revealed rapid and severe changes in the metabolite profile within 15 min as the initial reaction of light acclimation. Thus, during the shift from RL to BL, increased concentrations of amino acids and TCA cycle intermediates were observed whereas during the BL to RL shift the levels of amino acids were decreased and intermediates of glycolysis accumulated. Accordingly, on the time scale of hours the RL to BL shift led to a redirection of carbon into the synthesis of proteins, whereas during the BL to RL shift an accumulation of carbohydrates occurred. Thus, a vast metabolic reorganization of the cells was observed as the initial reaction to changes in light quality. The results are discussed with respect to a putative direct regulation of cellular enzymes by light quality and by transcriptional regulation. Interestingly, the short-term changes in the metabolome were accompanied by changes in the degree of reduction of the plastoquinone pool. Surprisingly, the RL to BL shift led to a severe inhibition of growth within the first 48 h which was not observed during the BL to RL shift. Furthermore, during the phase of growth arrest the photosynthetic performance did not change. We propose arguments that the growth arrest could have been caused by the reorganization of intracellular carbon partitioning.

Characterization of Omega-WINGS galaxy clusters. I. Stellar light and mass profiles

Science.gov (United States)

Cariddi, S.; D'Onofrio, M.; Fasano, G.; Poggianti, B. M.; Moretti, A.; Gullieuszik, M.; Bettoni, D.; Sciarratta, M.

2018-02-01

Context. Galaxy clusters are the largest virialized structures in the observable Universe. Knowledge of their properties provides many useful astrophysical and cosmological information. Aims: Our aim is to derive the luminosity and stellar mass profiles of the nearby galaxy clusters of the Omega-WINGS survey and to study the main scaling relations valid for such systems. Methods: We merged data from the WINGS and Omega-WINGS databases, sorted the sources according to the distance from the brightest cluster galaxy (BCG), and calculated the integrated luminosity profiles in the B and V bands, taking into account extinction, photometric and spatial completeness, K correction, and background contribution. Then, by exploiting the spectroscopic sample we derived the stellar mass profiles of the clusters. Results: We obtained the luminosity profiles of 46 galaxy clusters, reaching r200 in 30 cases, and the stellar mass profiles of 42 of our objects. We successfully fitted all the integrated luminosity growth profiles with one or two embedded Sérsic components, deriving the main clusters parameters. Finally, we checked the main scaling relation among the clusters parameters in comparison with those obtained for a selected sample of early-type galaxies (ETGs) of the same clusters. Conclusions: We found that the nearby galaxy clusters are non-homologous structures such as ETGs and exhibit a color-magnitude (CM) red-sequence relation very similar to that observed for galaxies in clusters. These properties are not expected in the current cluster formation scenarios. In particular the existence of a CM relation for clusters, shown here for the first time, suggests that the baryonic structures grow and evolve in a similar way at all scales.

Optimization of catalytic glycerol steam reforming to light olefins using Cu/ZSM-5 catalyst

International Nuclear Information System (INIS)

Zakaria, Z.Y.; Amin, N.A.S.; Linnekoski, J.

2014-01-01

Highlights: • Glycerol steam reforming to light olefin using Cu/ZSM-5 process was optimized. • Response surface methodology and multi-objective genetic algorithm were employed. • Second order polynomial model produced adequately fitted experimental data. • Thermodynamic study inferred high temperature requirement for ethylene formation. • Turn-over-frequency at optimized responses is higher than the non-optimized process. - Abstract: Response surface methodology (RSM) and multi-objective genetic algorithm was employed to optimize the process parameters for catalytic conversion of glycerol, a byproduct from biodiesel production, to light olefins using Cu/ZSM-5 catalyst. The effects of operating temperature, weight hourly space velocity (WHSV) and glycerol concentration on light olefins selectivity and yield were observed. Experimental results revealed the data adequately fitted into a second-order polynomial model. The linear temperature and quadratic WHSV terms gave significant effect on both responses. Optimization of both the responses indicated that temperature favouring high light olefin formation lied beyond the experimental design range. The trend in the temperature profile concurred commensurately with the thermodynamic analysis. Multi-objective genetic algorithm was performed to attain a single set of processing parameters that could produce both the highest light olefin selectivity and yield. The turn-over-frequency (TOF) of the optimized responses demonstrated a slightly higher value than the one which was not optimized. Combination of RSM, multi-objective response and thermodynamic is useful to determine the process optimal operating conditions for industrial applications

Effect of canning on color, protein and phenolic profile of grains from kidney bean, field pea and chickpea.

Science.gov (United States)

Parmar, Naincy; Singh, Narpinder; Kaur, Amritpal; Virdi, Amardeep Singh; Thakur, Sheetal

2016-11-01

The aim of the present study was to evaluate the effect of canning on color, protein and phenolic profile of grains of kidney bean, field pea and chickpea varieties/accession. Color of grains of different pulses was enhanced after canning. Grains L* (lightness) decreased while a* (redness to yellowness) and b* (greenness to blueness) increased after canning in all the pulses. Protein profiling of grains of different pulses after canning revealed that kidney bean and chickpea, respectively, had the least and the most thermally susceptible polypeptides. Kidney bean and chickpea showed higher Percentage washed drained weight (PWDW) than field pea. Pulse with more grain hardness and PWDW showed higher degree of grain splitting during canning. Grain splitting was also higher in dark colored accessions/varieties as compared to the light colored. Ferulic acid was the most predominant compound present in raw grains of different pulses. Raw kidney bean grains showed higher accumulation of catechin, chlorogenic, protocatechuic acid, p-coumaric acid and ferulic acid than those of chickpea and field pea. Canning caused reduction in all the phenolic compounds except gallic acid and most prominent effect of canning on protocatechuic acid, chlorogenic and ferulic acid was observed. Copyright © 2016. Published by Elsevier Ltd.

Line profile variations in selected Seyfert galaxies

International Nuclear Information System (INIS)

Kollatschny, W; Zetzl, M; Ulbrich, K

2010-01-01

Continua as well as the broad emission lines in Seyfert 1 galaxies vary in different galaxies with different amplitudes on typical timescales of days to years. We present the results of two independent variability campaigns taken with the Hobby-Eberly Telescope. We studied in detail the integrated line and continuum variations in the optical spectra of the narrow-line Seyfert galaxy Mrk 110 and the very broad-line Seyfert galaxy Mrk 926. The broad-line emitting region in Mrk 110 has radii of four to 33 light-days as a function of the ionization degree of the emission lines. The line-profile variations are matched by Keplerian disk models with some accretion disk wind. The broad-line region in Mrk 926 is very small showing an extension of two to three light-days only. We could detect a structure in the rms line-profiles as well as in the response of the line profile segments of Mrk 926 indicating the BLR is structured.

An Incremental Weighted Least Squares Approach to Surface Lights Fields

Science.gov (United States)

Coombe, Greg; Lastra, Anselmo

An Image-Based Rendering (IBR) approach to appearance modelling enables the capture of a wide variety of real physical surfaces with complex reflectance behaviour. The challenges with this approach are handling the large amount of data, rendering the data efficiently, and previewing the model as it is being constructed. In this paper, we introduce the Incremental Weighted Least Squares approach to the representation and rendering of spatially and directionally varying illumination. Each surface patch consists of a set of Weighted Least Squares (WLS) node centers, which are low-degree polynomial representations of the anisotropic exitant radiance. During rendering, the representations are combined in a non-linear fashion to generate a full reconstruction of the exitant radiance. The rendering algorithm is fast, efficient, and implemented entirely on the GPU. The construction algorithm is incremental, which means that images are processed as they arrive instead of in the traditional batch fashion. This human-in-the-loop process enables the user to preview the model as it is being constructed and to adapt to over-sampling and under-sampling of the surface appearance.

Video profile monitor diagnostic system for GTA

International Nuclear Information System (INIS)

Sandoval, D.P.; Garcia, R.C.; Gilpatrick, J.D.; Johnson, K.F.; Shinas, M.A.; Wright, R.; Yuan, V.; Zander, M.E.

1992-01-01

This paper describes a video diagnostic system used to measure the beam profile and position of the Ground Test Accelerator 2.5-MeV H - ion beam as it exits the intermediate matching section. Inelastic collisions between H-ions and residual nitrogen to fluoresce. The resulting light is captured through transport optics by an intensified CCD camera and is digitized. Real-time beam-profile images are displayed and stored for detailed analysis. Analyzed data showing resolutions for both position and profile measurements will also be presented

Does light attract piglets to the creep area?

Science.gov (United States)

Larsen, M L V; Pedersen, L J

2015-06-01

Hypothermia, experienced by piglets, has been related to piglet deaths and high and early use of a heated creep area is considered important to prevent hypothermia. The aims of the present study were to investigate how a newly invented radiant heat source, eHeat, would affect piglets' use of the creep area and whether light in the creep area works as an attractant on piglets. A total of 39 sows, divided between two batches, were randomly distributed to three heat source treatments: (1) standard infrared heat lamp (CONT, n=19), (2) eHeat with light (EL, n=10) and (3) eHeat without light (ENL, n=10). Recordings of piglets' use of the creep area were made as scan sampling every 10 min for 3 h during two periods, one in daylight (0900 to 1200 h) and one in darkness (2100 to 2400 h), on day 1, 2, 3, 7, 14 and 21 postpartum. On the same days, piglets were weighted. Results showed an interaction between treatment and observation period (Pcreep area during darkness compared with daylight for CONT and EL litters, but not for ENL litters. Piglets average daily weight gain was not affected by treatment, but was positively correlated with piglets' birth weight and was lower in batch 1 compared with batch 2. Seen from the present results, neither eHeat nor light worked as an attractant on piglets; in contrast, piglets preferred to sleep in the dark and it would therefore be recommended to turn off the light in the creep area during darkness. Heating up the creep area without light can be accomplished by using a radiant heat source such as eHeat in contrast to the normally used light-emitting infrared heat lamp.

Changes in olive oil volatile organic compounds induced by water status and light environment in canopies of Olea europaea L. trees.

Science.gov (United States)

Benelli, Giovanni; Caruso, Giovanni; Giunti, Giulia; Cuzzola, Angela; Saba, Alessandro; Raffaelli, Andrea; Gucci, Riccardo

2015-09-01

Light and water are major factors in fruit development and quality. In this study, the effect of water and light in Olea europaea trees on volatile organic compounds (VOCs) in olive oil was studied over 2 years. Mature fruits were harvested from three zones of the canopy with different light exposure (64%, 42% and 30% of incident light) of trees subjected to full, deficit or complementary irrigation. VOCs were determined by SPME GC-MS and analysed by principal component analysis followed by discriminant analysis to partition treatment effects. Fruit fresh weight and mesocarp oil content decreased in zones where intercepted light was less. Low light levels significantly slowed down fruit maturation, whereas conditions of water deficit accelerated the maturation process. The presence of cyclosativene and α-muurulene was associated with water deficit, nonanal, valencene with full irrigation; α-muurulene, (E)-2-hexanal were related to low light conditions, while trans-β-ocimene, α-copaene, (Z)-2-penten-1-ol, hexanal and nonanal to well exposed zones. The year strongly affected the VOC profile of olive oil. This is the first report on qualitative changes in VOCs induced by light environment and/or water status. This information is valuable to better understand the role of environmental factors on the sensory quality of virgin olive oil. © 2014 Society of Chemical Industry.

Self-imaging of partially coherent light in graded-index media.

Science.gov (United States)

Ponomarenko, Sergey A

2015-02-15

We demonstrate that partially coherent light beams of arbitrary intensity and spectral degree of coherence profiles can self-image in linear graded-index media. The results can be applicable to imaging with noisy spatial or temporal light sources.

Photographic measurements of the diffuse light in the coma cluster

International Nuclear Information System (INIS)

Thuan, T.X.; Kormendy, J.

1977-01-01

The diffuse background light in the Coma cluster is measured using isodensity tracings of B, G, V, and R photographic plates taken with the Palomar 1.2-m Schmidt telescope. The isodensity contours are calibrated using the star profile derived by Kormendy (1973). Between 4 and 14 arc min from the center, the surface brightness of the diffuse light decreases from approximately 26 to approximately 28 G magnitudes arc sec -2 . The total magnitude in this annulus is G = 11.22, which is approximately 45 percent of the light in galaxies alone, or approximately 30 percent of the total. This does little to alleviate the ''missing mass'' problem. The isodensity contours and the equivalent profile of the diffuse light closely parallel the distribution of light in galaxies, implying no strong mass segregation. However, the background light appears to be bluer than the galaxies. This is consistent with the hypothesis that the background consists of stars tidally stripped from galaxies, which generally become bluer at larger radii. The present technique is very different from methods used in the past. Comparison of a variety of measurements shows that a reasonably consistent body of data on the background light now exists

Dim Light at Night Disrupts Molecular Circadian Rhythms and Affects Metabolism

Science.gov (United States)

Fonken, Laura K.; Aubrecht, Taryn G.; Meléndez-Fernández, O. Hecmarie; Weil, Zachary M.; Nelson, Randy J.

2014-01-01

With the exception of high latitudes, life has evolved under bright days and dark nights. Most organisms have developed endogenously driven circadian rhythms which are synchronized to this daily light/dark cycle. In recent years, humans have shifted away from the naturally occurring solar light cycle in favor of artificial and sometimes irregular light schedules produced by electrical lighting. Exposure to unnatural light cycles is increasingly associated with obesity and metabolic syndrome; however the means by which environmental lighting alters metabolism are poorly understood. Thus, we exposed mice to nighttime light and investigated changes in the circadian system and body weight. Here we report that exposure to ecologically relevant levels of dim (5 lux) light at night attenuate core circadian clock rhythms in the SCN at both the gene and protein level. Moreover, circadian clock rhythms were perturbed in the liver by nighttime light exposure. Changes in the circadian clock were associated with temporal alterations in feeding behavior and increased weight gain. These results are significant because they provide mechanistic evidence for how mild changes in environmental lighting can alter circadian and metabolic function. PMID:23929553

Cryogenic explosion environment modeling and testing of space shuttle and light-weight radioisotope heater unit interactions

International Nuclear Information System (INIS)

Johnson, E.W.

1985-10-01

In order to assess the risk to the world's populace in the event of a Space Shuttle accident when radioisotope-containing heat sources are on board, testing of that system must be performed to determine release point, environments required, and the size distribution of the released fuel. To evaluate the performance of the Light-Weight Radioisotope Heater Unit (LWRHU) (101 of these 1-W items are placed on the Galileo spacecraft which will be launched from the Space Shuttle), some high-velocity impact and flyer plate testing was carried out. The results showed that a bare urania-fueled LWRHU clad (approximately 1-mm thick platinum-30 wt % rhodium alloy) will withstand 1100 m/s flyer plate (3.5-mm thick aluminum) impacts and 330 m/s impacts upon the Space Shuttle floor (approximately 12-mm thick aluminum) without rupture or fuel release. Velocities in the order of 600 m/s on a steel surface will cause clad failure with fuel release. The fuel breakup patterns were characterized as to quantity in a specific size range. These data were employed in the formal Safety Analysis Report for the LWRHU to support the planned 1986 Galileo launch. 19 figs

Development of a light-weight beryllium Cassegrain telescope: from the optical design to the performance measurement

Science.gov (United States)

Viertl, Jacques; Greger, Ralf; Di Domenico, Maurizio; Francou, Laurent; Ellouzi, Marina; Blum, Steffen; Kudielka, Klaus; Weigel, Thomas; Rugi Grond, Elisabetta; Piazza, Daniele

2012-12-01

The BepiColombo Laser Altimeter (BELA) is selected to fly on board of the ESA's BepiColombo Mercury Planetary Orbiter (MPO). The instrument will be the first European planetary laser altimeter system. RUAG Space is the industrial prime for the Receiver part of the scientific instrument. The BELA Receiver is a joined effort of Swiss industries under the leading role of RUAG and University of Bern as co-Prime. A core element is the light weighted Receiver Telescope (RTL), to collect the laser pulse reflected from the planet's surface. An innovative design was required to deal with the very challenging Mercury's environmental conditions and with the very stringent instrument's mass budget. The Optothermo- mechanical analyses lead to the design of a 1250mm focal length Cassegrain telescope made of Beryllium. It provides an aperture of 204 mm diameter and a 2 mm thick primary mirror for a total mass of less than 600gr. The manufacturing and the integration needed special developments. This paper presents the design analyses and the major challenges which had to be solved. Discussing some aspects of the telescope integration and test campaign, the finally achieved performances and lessons learnt will be presented.

Real-time tunability of chip-based light source enabled by microfluidic mixing

DEFF Research Database (Denmark)

Olsen, Brian Bilenberg; Rasmussen, Torben; Balslev, Søren

2006-01-01

We demonstrate real-time tunability of a chip-based liquid light source enabled by microfluidic mixing. The mixer and light source are fabricated in SU-8 which is suitable for integration in SU-8-based laboratory-on-a-chip microsystems. The tunability of the light source is achieved by changing...... the concentration of rhodamine 6G dye inside two integrated vertical resonators, since both the refractive index and the gain profile are influenced by the dye concentration. The effect on the refractive index and the gain profile of rhodamine 6G in ethanol is investigated and the continuous tuning of the laser...

Characterization of thermal plasmas by laser light scattering

International Nuclear Information System (INIS)

Snyder, S.C.; Lassahn, G.D.; Reynolds, L.D.; Fincke, J.R.

1993-01-01

Characterization of an atmospheric pressure free-burning arc discharge and a plasma jet by lineshape analysis of scattered laser light is described. Unlike emission spectroscopy, this technique provides direct measurement of plasma gas temperature, electron temperature and electron density without the assumption of local thermodynamic equilibrium (LTE). Plasma gas velocity can also be determined from the Doppler shift of the scattered laser light. Radial gas temperature, electron temperature and electron density profiles are presented for an atmospheric pressure argon free-burning arc discharge. These results show a significant departure from LTE in the arc column, contradicting results obtained from emission spectroscopy. Radial gas temperature and gas velocity profiles in the exit plane of a subsonic atmospheric pressure argon plasma jet are also presented. In this case, the results show the plasma jet is close to LTE in the center, but not in the fringes. The velocity profile is parabolic

Development of a compact light weight DELRAD probe and its integration with UAV NETRA for aerial radiation surveillance

International Nuclear Information System (INIS)

Prasad, Mahaveer; Yadav, Ashok Kumar; Gupta, D.K.; Bhatnagar, Vivek; Singh, Chiman; Mishrilal

2018-01-01

The DEfence Laboratory RAdiation Detector - 'DELRAD' is an indigenously developed Hybrid Micro Circuit Module employing Si PIN diodes for detection of gamma radiation. Using this as a detector, the 'DELRAD Probe' has been designed and developed specifically for the UAV, NETRA for aerial surveillance of the nuclear affected areas. The critical requirement of very light weight radiation sensor as payload (<50gm) for the UAV NETRA is met by designing this Probe weighing approx. 40gm. The sensor is capable of measuring gamma radiation levels from 1mR/h to 1000R/h. The Probe has been tested, calibrated and integrated with the UAV NETRA. In addition to this, the radiation testing during flight of UAV NETRA integrated with DELRAD probe has also been carried out and results have been recorded. The work carried out proves the capability of Defence Laboratory, Jodhpur, (DRDO) in the area of 'Aerial Surveillance of Nuclear Radiation Affected Area' using Unmanned Aerial Vehicles (UAVs)

Behaviour and growth performance of low-birth-weight piglets cross-fostered in multiparous sows with piglets of higher birth weights

Directory of Open Access Journals (Sweden)

L.P. Souza

2014-04-01

Full Text Available The aim of the study was to evaluate the behaviour, pre-weaning survival rate and growth performance of low birth weight (BW piglets cross-fostered with piglets of higher weights. Piglets were transferred to 60 foster sows, and divided in three groups (G; n=20: G1- 12 low BW piglets (0.80 - 1.25kg; G2- six low BW piglets and six intermediate BW piglets (1.40 - 1.60kg, and G3- six low BW piglets and six high BW piglets (>1.70kg. For the analysis, groups G2 and G3 were subdivided in LG2 (six G2 light piglets; IG2 (six G2 intermediate piglets, LG3 (six G3 light piglets, and HG3 (six G3 heavy piglets. Behavioural observations were carried out on days 1, 2, 4 and 6 (visual direct observation and on days 3 and 5 (video recording after birth. The percentage of missed nursings was higher in LG3 piglets than in LG1, IG2 and HG3 piglets, on days 1 and 2. On day 4, light piglets (LG1, LG2 and LG3 missed more nursings than IG2 and HG3 piglets. On day 3, video recording showed a higher percentage of missed nursings in LG1, LG2, and LG3 piglets as compared to HG3 piglets. On day 1, the number of fights during nursing was higher in IG2 than in LG1 and LG3 piglets. Also on day 1, number of fights and percentage of piglets engaged in fights, during 15min after nursing, were higher in LG1, LG3 and HG3 than in LG2 piglets. More playful behaviours were observed on day 2 in IG2 and HG3 piglets compared to LG1, LG2 and LG3 piglets. Light piglets (LG1, LG2, and LG3 presented similar body weight on days 4, 8, 12 and 16 after birth, regardless of being mixed with piglets of higher weights or not; however, the survival rate until day 16 was most compromised in LG3 piglets compared to the other groups. Despite the lack of influence of littermates' weight on the growth of low BW piglets, their survival rate indicates that they should not be mixed with high BW piglets.

Micronutrient Gaps in Three Commercial Weight-Loss Diet Plans.

Science.gov (United States)

G Engel, Matthew; J Kern, Hua; Brenna, J Thomas; H Mitmesser, Susan

2018-01-20

Weight-loss diets restrict intakes of energy and macronutrients but overlook micronutrient profiles. Commercial diet plans may provide insufficient micronutrients. We analyzed nutrient profiles of three plans and compared their micronutrient sufficiency to Dietary Reference Intakes (DRIs) for male U.S. adults. Hypocaloric vegan (Eat to Live-Vegan, Aggressive Weight Loss; ETL-VAWL), high-animal-protein low-carbohydrate (Fast Metabolism Diet; FMD) and weight maintenance (Eat, Drink and Be Healthy; EDH) diets were evaluated. Seven single-day menus were sampled per diet ( n = 21 menus, 7 menus/diet) and analyzed for 20 micronutrients with the online nutrient tracker CRON-O-Meter. Without adjustment for energy intake, the ETL-VAWL diet failed to provide 90% of recommended amounts for B 12 , B₃, D, E, calcium, selenium and zinc. The FMD diet was low (90% DRIs for all but vitamin D, calcium and potassium. Several micronutrients remained inadequate after adjustment to 2000 kcal/day: vitamin B 12 in ETL-VAWL, calcium in FMD and EDH and vitamin D in all diets. Consistent with previous work, micronutrient deficits are prevalent in weight-loss diet plans. Special attention to micronutrient rich foods is required to reduce risk of micronutrient deficiency in design of commercial diets.

Micronutrient Gaps in Three Commercial Weight-Loss Diet Plans

Science.gov (United States)

J. Kern, Hua; Brenna, J. Thomas; H. Mitmesser, Susan

2018-01-01

Weight-loss diets restrict intakes of energy and macronutrients but overlook micronutrient profiles. Commercial diet plans may provide insufficient micronutrients. We analyzed nutrient profiles of three plans and compared their micronutrient sufficiency to Dietary Reference Intakes (DRIs) for male U.S. adults. Hypocaloric vegan (Eat to Live-Vegan, Aggressive Weight Loss; ETL-VAWL), high-animal-protein low-carbohydrate (Fast Metabolism Diet; FMD) and weight maintenance (Eat, Drink and Be Healthy; EDH) diets were evaluated. Seven single-day menus were sampled per diet (n = 21 menus, 7 menus/diet) and analyzed for 20 micronutrients with the online nutrient tracker CRON-O-Meter. Without adjustment for energy intake, the ETL-VAWL diet failed to provide 90% of recommended amounts for B12, B3, D, E, calcium, selenium and zinc. The FMD diet was low (diet met >90% DRIs for all but vitamin D, calcium and potassium. Several micronutrients remained inadequate after adjustment to 2000 kcal/day: vitamin B12 in ETL-VAWL, calcium in FMD and EDH and vitamin D in all diets. Consistent with previous work, micronutrient deficits are prevalent in weight-loss diet plans. Special attention to micronutrient rich foods is required to reduce risk of micronutrient deficiency in design of commercial diets. PMID:29361684

Performance characteristics and blood profile of West African dwarf ...

African Journals Online (AJOL)

A twelve week trial was investigated to evaluate performance and blood profile of West African dwarf (WAD) goats fed malted sorghum sprout with pineapple waste (MSPW) based diet. The malted sorghum sprout and pineapple waste was at ratio 1:2 (weight/weight) respectively. Sixteen WAD goats with average initial ...

Human factors engineering applications in the testing of the legal weight truck cask transportation system

International Nuclear Information System (INIS)

Smith, T.C.; Peck, M. III; Sealock, R.A.

1994-01-01

The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) will collect performance data to be used in limited human factors engineering analysis of the light weight tractor as a component of the legal weight truck cask transport system. The Management and Operating contractor will provide an analysis and comparison of limited data on driver behavior and subjective driver evaluations of the light weight tractor performance versus that of a heavier baseline tractor. A significant difference in performance data would suggest that given tractor configurations affect driver behavior differently

Effect of dietary patterns differing in carbohydrate and fat content on blood lipid and glucose profiles based on weight-loss success of breast-cancer survivors.

Science.gov (United States)

Thompson, Henry J; Sedlacek, Scot M; Paul, Devchand; Wolfe, Pamela; McGinley, John N; Playdon, Mary C; Daeninck, Elizabeth A; Bartels, Sara N; Wisthoff, Mark R

2012-01-06

Healthy body weight is an important factor for prevention of breast cancer recurrence. Yet, weight loss and weight gain are not currently included in clinical-practice guidelines for posttreatment of breast cancer. The work reported addresses one of the questions that must be considered in recommending weight loss to patients: does it matter what diet plan is used, a question of particular importance because breast cancer treatment can increase risk for cardiovascular disease. Women who completed treatment for breast cancer were enrolled in a nonrandomized, controlled study investigating effects of weight loss achieved by using two dietary patterns at the extremes of macronutrient composition, although both diet arms were equivalent in protein: high fat, low carbohydrate versus low fat, high carbohydrate. A nonintervention group served as the control arm; women were assigned to intervention arms based on dietary preferences. During the 6-month weight-loss program, which was menu and recipe defined, participants had monthly clinical visits at which anthropometric data were collected and fasting blood was obtained for safety monitoring for plasma lipid profiles and fasting glucose. Results from 142 participants are reported. Adverse effects on fasting blood lipids or glucose were not observed in either dietary arm. A decrease in fasting glucose was observed with progressive weight loss and was greater in participants who lost more weight, but the effect was not statistically significant, even though it was observed across both diet groups (P = 0.21). Beneficial effects of weight loss on cholesterol (4.7%; P = 0.001), triglycerides (21.8%; P = 0.01), and low-density lipoprotein (LDL) cholesterol (5.8%; P = 0.06) were observed in both groups. For cholesterol (P = 0.07) and LDL cholesterol (P = 0.13), greater reduction trends were seen on the low-fat diet pattern; whereas, for triglycerides (P = 0.01) and high-density lipoprotein (HDL) cholesterol (P = 0.08), a decrease

PHYTOPLANKTON - WET WEIGHT and Other Data (NODC Accession 9400037)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Profiles of Chlorophyll data from NASA Goddard and Phytoplankton wet weight data in this accession was submitted by Mr. Charles R. McClain of US National...

Fragment profiling of low molecular weight heparins using reversed phase ion pair liquid chromatography-electrospray mass spectrometry.

Science.gov (United States)

Xu, Xiaohui; Li, Daoyuan; Chi, Lequan; Du, Xuzhao; Bai, Xue; Chi, Lianli

2015-04-30

Low molecular weight heparins (LMWHs) are linear and highly charged carbohydrate polymers prepared by chemical or enzymatic depolymerization of heparin. Compared to unfractionated heparin (UFH), LMWHs are prevalently used as clinical anticoagulant drugs due to their lower side effects and better bioavailability. The work presented herein provides a rapid and powerful fragment mapping method for structural characterization of LMWHs. The chain fragments of two types of LMWHs, enoxaparin and nadroparin, were generated by controlled enzymatic digestion with each of heparinase I (Hep I, Enzyme Commission (EC) # 4.2.2.7), heparinase II (Hep II, no EC # assigned) and heparinase III (Hep III, EC # 4.2.2.8). Reversed phase ion pair high performance liquid chromatography (RPIP-HPLC) coupled with electrospray ion trap time-of-flight mass spectrometry (ESI-IT-TOF-MS) was used to profile the oligosaccharide chains ranging from disaccharides to decasaccharides. A database containing all theoretical structural compositions was established to assist the mass spectra interpretation. The six digests derived by three enzymes from two types of LMWHs exhibited distinguishable fingerprinting patterns. And a total of 94 enoxaparin fragments and 109 nadroparin fragments were detected and identified. Besides the common LMWH oligosaccharides, many components containing characteristic LMWH structures such as saturated L-idopyranosuronic acid, 2,5-anhydro-D-mannitol, 1,6-anhydro-D-aminopyranose, as well as odd number oligosaccharides were also revealed. Quantitative comparison of major components derived from innovator and generic nadroparin products was presented. This approach to profile LMWHs' fragments offers a highly reproducible, high resolution and information-rich tool for evaluating the quality of this category of anticoagulant drugs or comparing structural similarities among samples from various sources. Copyright © 2015 Elsevier Ltd. All rights reserved.

Measurement of light emission in scintillation vials

International Nuclear Information System (INIS)

Duran Ramiro, M. Teresa; Garcia-Torano, Eduardo

2005-01-01

The efficiency and energy resolution of liquid scintillation counting (LSC) systems are strongly dependent on the optical characteristics of scintillators, vials, and reflectors. This article presents the results of measurements of the light-emission profile of scintillation vials. Two measurement techniques, autoradiographs and direct measurements with a photomultiplier tube, have been used to obtain light-emission distribution for standard vials of glass, etched glass and polyethylene. Results obtained with both techniques are in good agreement. For the first time, the effect of the meniscus in terms of light contribution has been numerically estimated. These results can help design LSC systems that are more efficient in terms of light collection

Optical bi-sensorial measurement system for production control of extruded profiles

Science.gov (United States)

Weckenmann, A.; Bernstein, J.

2008-09-01

Extruded profiles are semi-finished products (made out of steel, brass, aluminum, synthetics...) which are appointed for wide applications in manufacturing of technical products. As yet used optical sensors in process control working to the shading technology detect the object's shadow orthographically to the axis of illumination. As a consequence they record it unattached by the profiles coat in measurement range at any point of the measured profile with high precision. As a matter of fact, concave zones cannot be captured. Alternatively the measurement of concave zones can be arranged by light-section systems. These do not comply with the required accuracy, are comparatively slow and moreover affected by dislocations of the section of the profile. A measurement system including a light-section and a shading system combines the advantages of both optical systems. It is to serve with a reliable conception for the assembly of a bi-sensorial measurement system consisting of both systems as well as suitable methods of analysis for the in-line inspection of concave profiles. As a result it contains conclusions concerning requirements of the light source, the arrangement of this source and the cameras, obtainable precision and sampling rate as well as the essential synchronization of both systems. After designing an appropriate prototype, the selected light-section system and the shading system will be synchronized and aligned. Therefore, the metered geometrical data will be merged for the evaluation of form deviation. So, developed and adapted software supports and contains proposals to the uncertainty after successful tests. The system and a calibration method will be proved in production where robustness will be a most critical despite of heat, dust and vibrations. The target uncertainty of less than 0.1 mm at every section of the profiles coat has to be met.

Development of low weight self-levelling mortars

International Nuclear Information System (INIS)

Padilla, A; Panama, I; Toledo, A; Flores, A

2015-01-01

This work shows the development of self levelling mortars, using micro bubbles based on aluminium silicate with a density of 0.25 g/cm 3 . Mortars formulations are composed by 8 different components in order to achieve properties balance between fresh and solid state. The mean objective is development light weight mortars with high fluidity and compression strength using micro bubbles and some additives. Formulations were designed employing Taguchi DOE of 8 variables and 3 states. Result analysis according to Taguchi method lets indentify the preponderant effect of each variable on the cited properties. Several formulations reached fluidity higher than 250%, with compression strength around 100 kg/cm 2 and a low volumetric weigh. Obtained volumetric weights are 20% less than commercial self levelling mortars weight. Finally some relations are presented such: as relation water/cement with fluidity, and micro bubble content versus mortars volumetric weight, and finally compression strength versus the volumetric weight of mortars

Light chain deposition disease in multiple myeloma: MR imaging features correlated with histopathological findings

International Nuclear Information System (INIS)

Baur, A.; Staebler, A.; Reiser, M.; Lamerz, R.; Bartl, R.

1998-01-01

The clinical, histopathological, and imaging findings on MRI of a 56-year-old woman with light chain deposition disease occurring in multiple myeloma are presented. Light chain deposition disease is a variant of multiple myeloma with distinct clinical and histological characteristics. MRI of this patient also revealed an infiltration pattern in the bone marrow distinct from that of typical multiple myeloma. Multiple small foci of low signal intensity were present on T1- and T2-weighted spin echo and STIR images, corresponding to conglomerates of light chains in bone marrow biopsy. Contrast-enhanced T1-weighted spin echo images show diffuse enhancement of 51% over all vertebral bodies, with a minor enhancement of the focal conglomerates of light chains. Light chain deposition disease in multiple myeloma should be added to the list of those few entities with normal radiographs and discrete low-signal marrow lesions on T1- and T2-weighted spin echo pulse sequences. (orig.)

Effect of nitrogen-starvation, light intensity and iron on triacylglyceride/carbohydrate production and fatty acid profile of Neochloris oleoabundans HK-129 by a two-stage process.

Science.gov (United States)

Sun, Xian; Cao, Yu; Xu, Hui; Liu, Yan; Sun, Jianrui; Qiao, Dairong; Cao, Yi

2014-03-01

Triacylglyceride (TAG) and carbohydrate are potential feedstock for biofuels production. In this study, a two-stage process was applied for enhancing TAG/carbohydrate production in the selected microalgae - Neochloris oleoabundans HK-129. In stage I, effects of nitrogen, light intensity and iron on cell growth were investigated, and the highest biomass productivity of 292.83±5.83mg/L/d was achieved. In stage II, different nitrogen-starvation periods, light intensities and iron concentrations were employed to trigger accumulation of TAG and carbohydrate. The culture under 2-day N-starvation, 200μmol/m(2)/s light intensity and 0.037mM Fe(3+) concentration produced the maximum TAG and carbohydrate productivity of 51.58mg/L/d and 90.70mg/L/d, respectively. Nitrogen starvation period and light intensity had marked effects on TAG/carbohydrate accumulation and fatty acids profile, compared to iron concentration. The microalgal lipid was mainly composed of C16/C18 fatty acids (90.02%), saturated fatty acids (29.82%), and monounsaturated fatty acids (32.67%), which is suitable for biodiesel synthesis. Copyright © 2014 Elsevier Ltd. All rights reserved.

Efficiency of Individual Tree Detection Approaches Based on Light-Weight and Low-Cost UAS Imagery in Australian Savannas

Directory of Open Access Journals (Sweden)

Grigorijs Goldbergs

2018-01-01

Full Text Available The reliability of airborne light detection and ranging (LiDAR for delineating individual trees and estimating aboveground biomass (AGB has been proven in a diverse range of ecosystems, but can be difficult and costly to commission. Point clouds derived from structure from motion (SfM matching techniques obtained from unmanned aerial systems (UAS could be a feasible low-cost alternative to airborne LiDAR scanning for canopy parameter retrieval. This study assesses the extent to which SfM three-dimensional (3D point clouds—obtained from a light-weight mini-UAS quadcopter with an inexpensive consumer action GoPro camera—can efficiently and effectively detect individual trees, measure tree heights, and provide AGB estimates in Australian tropical savannas. Two well-established canopy maxima and watershed segmentation tree detection algorithms were tested on canopy height models (CHM derived from SfM imagery. The influence of CHM spatial resolution on tree detection accuracy was analysed, and the results were validated against existing high-resolution airborne LiDAR data. We found that the canopy maxima and watershed segmentation routines produced similar tree detection rates (~70% for dominant and co-dominant trees, but yielded low detection rates (<35% for suppressed and small trees due to poor representativeness in point clouds and overstory occlusion. Although airborne LiDAR provides higher tree detection rates and more accurate estimates of tree heights, we found SfM image matching to be an adequate low-cost alternative for the detection of dominant and co-dominant tree stands.

SURFACE BRIGHTNESS PROFILES OF DWARF GALAXIES. I. PROFILES AND STATISTICS

International Nuclear Information System (INIS)

Herrmann, Kimberly A.; Hunter, Deidre A.; Elmegreen, Bruce G.

2013-01-01

Radial surface brightness profiles of spiral galaxies are classified into three types: (I) single exponential, or the light falls off with one exponential to a break before falling off (II) more steeply, or (III) less steeply. Profile breaks are also found in dwarf disks, but some dwarf Type IIs are flat or increasing out to a break before falling off. Here we re-examine the stellar disk profiles of 141 dwarfs: 96 dwarf irregulars (dIms), 26 Blue Compact Dwarfs (BCDs), and 19 Magellanic-type spirals (Sms). We fit single, double, or even triple exponential profiles in up to 11 passbands: GALEX FUV and NUV, ground-based UBVJHK and Hα, and Spitzer 3.6 and 4.5 μm. We find that more luminous galaxies have brighter centers, larger inner and outer scale lengths, and breaks at larger radii; dwarf trends with M B extend to spirals. However, the V-band break surface brightness is independent of break type, M B , and Hubble type. Dwarf Type II and III profiles fall off similarly beyond the breaks but have different interiors and IIs break ∼twice as far as IIIs. Outer Type II and III scale lengths may have weak trends with wavelength, but pure Type II inner scale lengths clearly decrease from the FUV to visible bands whereas Type III inner scale lengths increase with redder bands. This suggests the influence of different star formation histories on profile type, but nonetheless the break location is approximately the same in all passbands. Dwarfs continue trends between profile and Hubble types such that later-type galaxies have more Type II but fewer Type I and III profiles than early-type spirals. BCDs and Sms are over-represented as Types III and II, respectively, compared to dIms

The weight of color

OpenAIRE

Brunberg, Mikael

2013-01-01

This paper explores the weight of color, with the focus lying on the symbolic significance ofcolor. Exploring whether color in itself conveys symbolic significance and is the symbolicsignificance of color permanent, or is it an after construction? It will be looking at differentareas such as what makes us humans able to perceive colors in the first place, beginning withan insight at some of the foundations in the area of color theory. Mentioning experiments ondecomposed white light, that cont...

Energy utilization of light and heavy weaned piglets subjected to different dietary energy levels

Directory of Open Access Journals (Sweden)

Andréa Machado Leal Ribeiro

Full Text Available ABSTRACT This study was conducted to evaluate the effects of dietary metabolisable energy (ME: 3.25, 3.40, 3.55, or 3.70 Mcal kg−1 and weaning weight (WW: light 4.0±0.7 kg, and heavy: 6.3±0.6 kg on productive response and energy utilization of weaned piglets. Sixty-four male piglets were housed in 32 metabolic cages (two animals per cage during the first 14 d postweaning. At day 15, only one animal per cage was kept until day 28. Body composition, energy, and nutrient deposition rates and energy utilization efficiency were measured through a comparative slaughter procedure. Piglets with light WW had a poorer feed conversion ratio and lower weight gain and feed intake when expressed per live weight. Increased ME led to greater daily fat deposition in the empty bodies (defined as weighted mean of the carcass + organs + blood, no intestinal content, while light WW piglets had a reduced protein deposition. Light WW piglets increased heat production with increased ME, but no effect was seen for the heavy WW piglets. By contrast, heavy WW piglets increased empty body gross energy as ME increased, while no influence was observed on light WW piglets. Increasing dietary energy levels did not contribute to the subsequent growth performance of piglets that were lighter at weaning. The lack of interaction between weaning weight and dietary ME content on growth performance does not support the hypothesis that light piglets at weaning do not exhibit compensatory growth because of limitations in energy intake.

Influence of carcass weight on meat quality of commercial feedlot steers with similar feedlot, slaughter and post-mortem management.

Science.gov (United States)

Agbeniga, Babatunde; Webb, Edward C

2018-03-01

The effects of beef carcass weight on muscle pH/temperature profile and selected meat quality attributes were evaluated. Twenty-six carcasses from light (≤260kg, n=15) and heavy (≥290kg, n=11) feedlot steers were randomly allocated and stimulated with low voltage electrical stimulation (LVES) for 30s at 7min post-mortem (pm). Quality evaluations were carried out on samples from the Longissimus et lumborum (LL) muscle from the left side of each carcass. Heavier carcasses showed faster pH decline and slower (P35°C) but there was no sign of sarcomere shortening in any carcass. Significantly lower (P0.05) drip loss at 3 and 14days pm as well as higher L* (meat lightness) (P<0.05) and C* (chroma) (P<0.05) values early (2days) pm. However, at 14days pm, there were no significant differences between the light and heavy carcasses in terms of L* and C*. No significant difference was observed between heavy and light carcasses in terms of H* at 2 and 14days pm. The study showed that heavier carcasses which favor slaughter house pricing can be produced and processed alongside lighter carcasses without significant detrimental effects on meat quality by using low voltage electrical stimulation (LVES). Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of Maternal Obesity and Gestational Weight Gain on Maternal and Foetal Lipid Profile.

Science.gov (United States)

Cinelli, Giulia; Fabrizi, Marta; Ravà, Lucilla; Ciofi Degli Atti, Marta; Vernocchi, Pamela; Vallone, Cristina; Pietrantoni, Emanuela; Lanciotti, Rosalba; Signore, Fabrizio; Manco, Melania

2016-06-15

Fatty acids (FAs) are fundamental for a foetus's growth, serving as an energy source, structural constituents of cellular membranes and precursors of bioactive molecules, as well as being essential for cell signalling. Long-chain polyunsaturated FAs (LC-PUFAs) are pivotal in brain and visual development. It is of interest to investigate whether and how specific pregnancy conditions, which alter fatty acid metabolism (excessive pre-pregnancy body mass index (BMI) or gestational weight gain (GWG)), affect lipid supply to the foetus. For this purpose, we evaluated the erythrocyte FAs of mothers and offspring (cord-blood) at birth, in relation to pre-pregnancy BMI and GWG. A total of 435 mothers and their offspring (237 males, 51%) were included in the study. Distribution of linoleic acid (LA) and α-linolenic acid (ALA), and their metabolites, arachidonic acid, dihomogamma linoleic (DGLA) and ecosapentanoic acid, was significantly different in maternal and foetal erythrocytes. Pre-pregnancy BMI was significantly associated with maternal percentage of MUFAs (Coeff: -0.112; p = 0.021), LA (Coeff: -0.033; p = 0.044) and DHA (Coeff. = 0.055; p = 0.0016); inadequate GWG with DPA (Coeff: 0.637; p = 0.001); excessive GWG with docosaexahenoic acid (DHA) (Coeff. = -0.714; p = 0.004). Moreover, pre-pregnancy BMI was associated with foetus percentage of PUFAs (Coeff: -0.172; p = 0.009), omega 6 (Coeff: -0.098; p = 0.015) and DHA (Coeff: -0.0285; p = 0.036), even after adjusting for maternal lipids. Our findings show that maternal GWG affects maternal but not foetal lipid profile, differently from pre-pregnancy BMI, which influences both.

Volume de iogurte light e sensações subjetivas do apetite de homens eutróficos e com excesso de peso Volume of light yogurt and subjective appetite sensations in normal-weight and overweight men

Directory of Open Access Journals (Sweden)

Luciana Neri Nobre

2006-10-01

Full Text Available OBJETIVO: Avaliar, independentemente de outras variáveis, o efeito do volume de iogurte light sobre os parâmetros de ingestão alimentar de homens saudáveis. MÉTODOS: Foi feita incorporação de ar ao iogurte por adição de um produto comercialmente disponível -Emustab® - (6g/300ml com posterior homogeneização em liqüidificador semi-industrial. Utilizaram-se três volumes de iogurte: 300, 450 e 600ml. Trabalhou-se com 20 participantes saudáveis, sendo 10 eutróficos, com índice de massa corporal entre 19 e 24,9kg/m² e 10 com excesso de peso, índice de massa corporal >25kg/m². Cada um deles recebeu um volume de iogurte em três diferentes dias, pela manhã, em jejum de 12 horas. Uma escala de analogia visual foi utilizada, num período de 4 horas e 30 minutos após ingestão de cada volume do iogurte, para avaliar sensações subjetivas de saciedade, fome e desejo por alimentos específicos. RESULTADOS: Os volumes do iogurte light afetaram a saciedade dos dois grupos estudados, sendo que o maior volume exerceu melhor essa ação (pOBJECTIVE: This study aimed to evaluate the effect of light yogurt volume on the food intake of healthy men regardless of other variables. METHODS: Air was added to the yogurt by mixing it with a commercially available product, Emustab®, (6g/300ml and homogenized in a semi-industrial blender. Three volumes of yogurt were used: 300, 450 and 600ml. Twenty healthy volunteers participated in the study, 10 with normal weight, Body Mass Index from 19 to 24.9kg/m² and 10 with excess weight, Body Mass Index >25kg/m². Each one of them was given a yogurt volume in three different days in the morning, after a 12 hour fast. After the intake of each yogurt volume, a visual analog scale was used to assess the subjective sensations of satiety, hunger and desire for specific foods. RESULTS: Light yogurt volumes affected the satiety of both studied groups and the greater volume was more effective (p<0.01. The highest

Diabesity: are weight loss medications effective?

Science.gov (United States)

Halpern, Alfredo; Mancini, Marcio C

2005-01-01

Weight reduction has been shown to improve glycemic control and cardiovascular risk factors associated with insulin resistance in obese individuals with type 2 diabetes mellitus. Therapeutic options for these patients include promoting weight loss (non-pharmacologic and pharmacologic treatment) and improving glycemic control, as well as treating common associated risk factors such as arterial hypertension and dyslipidemias. This article provides an overview of anti-obesity drugs used in the treatment of obese individuals with type 2 diabetes. The most widely investigated drugs, sibutramine and orlistat, result in modest, clinically worthwhile weight loss, with demonstrable improvements in many co-morbidities, among them, type 2 diabetes. Clinical trials with these anti-obesity medications in cohorts of obese diabetic patients have been reviewed as well as cathecolaminergic agents (diethylpropion [amfepramone], fenproporex, mazindol, ephedrine-caffeine combination), serotoninergic drugs (fenfluramine, dexfenfluramine, fluoxetine), and other drugs that have some action on weight loss (the antidiabetic agent metformin, anti-epileptic agents topiramate and zonisamide, and the antidepressive bupropion [amfebutamone]). These trials show variable benefits in terms of effects on glucose profiles.

Leaf Morphology, Photosynthetic Performance, Chlorophyll Fluorescence, Stomatal Development of Lettuce (Lactuca sativa L.) Exposed to Different Ratios of Red Light to Blue Light.

Science.gov (United States)

Wang, Jun; Lu, Wei; Tong, Yuxin; Yang, Qichang

2016-01-01

Red and blue light are both vital factors for plant growth and development. We examined how different ratios of red light to blue light (R/B) provided by light-emitting diodes affected photosynthetic performance by investigating parameters related to photosynthesis, including leaf morphology, photosynthetic rate, chlorophyll fluorescence, stomatal development, light response curve, and nitrogen content. In this study, lettuce plants (Lactuca sativa L.) were exposed to 200 μmol⋅m(-2)⋅s(-1) irradiance for a 16 h⋅d(-1) photoperiod under the following six treatments: monochromatic red light (R), monochromatic blue light (B) and the mixture of R and B with different R/B ratios of 12, 8, 4, and 1. Leaf photosynthetic capacity (A max) and photosynthetic rate (P n) increased with decreasing R/B ratio until 1, associated with increased stomatal conductance, along with significant increase in stomatal density and slight decrease in stomatal size. P n and A max under B treatment had 7.6 and 11.8% reduction in comparison with those under R/B = 1 treatment, respectively. The effective quantum yield of PSII and the efficiency of excitation captured by open PSII center were also significantly lower under B treatment than those under the other treatments. However, shoot dry weight increased with increasing R/B ratio with the greatest value under R/B = 12 treatment. The increase of shoot dry weight was mainly caused by increasing leaf area and leaf number, but no significant difference was observed between R and R/B = 12 treatments. Based on the above results, we conclude that quantitative B could promote photosynthetic performance or growth by stimulating morphological and physiological responses, yet there was no positive correlation between P n and shoot dry weight accumulation.

Video profile monitor diagnostic system for GTA

International Nuclear Information System (INIS)

Sandovil, D.P.; Garcia, R.C.; Gilpatrick, J.D.; Johnson, K.F.; Shinas, M.A.; Wright, R.; Yuan, V.; Zander, M.E.

1992-01-01

This paper describes a video diagnostic system used to measure the beam profile and position of the Ground Test Accelerator 2.5 MeV H - ion beam as it exits the intermediate matching section. Inelastic collisions between H - ions and residual nitrogen in the vacuum chamber cause the nitrogen to fluoresce. The resulting light is captured through transport optics by an intensified CCD camera and is digitized. Real-time beam profile images are displayed and stored for detailed analysis. Analyzed data showing resolutions for both position and profile measurements will also be presented. (Author) 5 refs., 7 figs

Avaliação do perfil sensorial de chá light sabor pêssego Sensory profile evaluation of light peach tea

Directory of Open Access Journals (Sweden)

Cibele Cristina Osawa

2008-12-01

Full Text Available No presente estudo foi determinado o perfil sensorial e a aceitação de três marcas comerciais de chá light sabor pêssego, denominadas A, B e C, acondicionadas em embalagem PET e adquiridas no comércio local. O perfil sensorial foi determinado por Análise Descritiva Quantitativa (ADQ utilizando-se uma equipe de 11 provadores rigorosamente selecionados e treinados. A aceitação dos produtos foi avaliada por 33 consumidores representativos do público alvo. Os resultados da ADQ foram submetidos à Análise de Variância (ANOVA, Teste de Média de Tukey e Análise de Componentes Principais. As amostras comerciais apresentaram perfis semelhantes em alguns termos descritores e diferenças significativas em outros. A amostra A caracterizou-se principalmente pelos atributos aroma e sabor de banana passa; a amostra B por aroma artificial de pêssego e refrescância; e a amostra C por aroma natural de pêssego e doçura. O Teste Afetivo, analisado por ANOVA e Teste de Média de Tukey, indicou maior aceitação para a amostra C. A cor das amostras foi avaliada pelo método Cielab L*a*b*, sendo que a amostra C se destacou das demais pela cor vermelha.In this work, three different brands of light peach iced tea (A, B and C, purchased in a local market and packed in PET bottles were sensory analyzed. At first, Quantitative Descriptive Analysis (QDA was conducted in order to obtain the sensorial profile, with eleven tasters, previously selected and trained. The product acceptance was evaluated by 33 consumers, representing the target public. The QDA results were submitted to ANOVA, Tukey's test and Principal Component Analysis (PCA. The sample A was mainly characterized by banana aroma and flavor; the sample B by artificial peach aroma and refreshment; while the sample C by sweetness and natural peach aroma. The acceptance test, analyzed by ANOVA and Tukey's test, showed a greater acceptance for the sample C. The colour of the samples was evaluated by

Light-Weight and Versatile Monitor for a Self-Adaptive Software Framework for IoT Systems

Directory of Open Access Journals (Sweden)

Young-Joo Kim

2016-01-01

Full Text Available Today, various Internet of Things (IoT devices and applications are being developed. Such IoT devices have different hardware (HW and software (SW capabilities; therefore, most applications require customization when IoT devices are changed or new applications are created. However, the applications executed on these devices are not optimized for power and performance because IoT device systems do not provide suitable static and dynamic information about fast-changing system resources and applications. Therefore, this paper proposes a light-weight and versatile monitor for a self-adaptive software framework to automatically control system resources according to the system status. The monitor helps running applications guarantee low power consumption and high performance for an optimal environment. The proposed monitor has two components: a monitoring component, which provides real-time static and dynamic information about system resources and applications, and a controlling component, which supports real-time control of system resources. For the experimental verification, we created a video transport system based on IoT devices and measured the CPU utilization by dynamic voltage and frequency scaling (DVFS for the monitor. The results demonstrate that, for up to 50 monitored processes, the monitor shows an average CPU utilization of approximately 4% in the three DVFS modes and demonstrates maximum optimization in the Performance mode of DVFS.

Classification of early-stage non-small cell lung cancer by weighing gene expression profiles with connectivity information.

Science.gov (United States)

Zhang, Ao; Tian, Suyan

2018-05-01

Pathway-based feature selection algorithms, which utilize biological information contained in pathways to guide which features/genes should be selected, have evolved quickly and become widespread in the field of bioinformatics. Based on how the pathway information is incorporated, we classify pathway-based feature selection algorithms into three major categories-penalty, stepwise forward, and weighting. Compared to the first two categories, the weighting methods have been underutilized even though they are usually the simplest ones. In this article, we constructed three different genes' connectivity information-based weights for each gene and then conducted feature selection upon the resulting weighted gene expression profiles. Using both simulations and a real-world application, we have demonstrated that when the data-driven connectivity information constructed from the data of specific disease under study is considered, the resulting weighted gene expression profiles slightly outperform the original expression profiles. In summary, a big challenge faced by the weighting method is how to estimate pathway knowledge-based weights more accurately and precisely. Only until the issue is conquered successfully will wide utilization of the weighting methods be impossible. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Controlling nanowire emission profile using conical taper

DEFF Research Database (Denmark)

Gregersen, Niels; Nielsen, Torben Roland; Mørk, Jesper

2008-01-01

The influence of a conical taper on nanowire light emission is studied. For nanowires with divergent output beams, the introduction of tapers improves the emission profile and increase the collection efficiency of the detection optics....

NASA-UVa light aerospace alloy and structures technology program

Science.gov (United States)

Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Scully, John R.; Stoner, Glenn E.; Swanson, Robert E.; Thornton, Earl A.; Wawner, Franklin E., Jr.

1991-01-01

The general objective of the NASA-UVa Light Aerospace Alloy and Structures Technology Program was to conduct research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures. The following research areas were actively investigated: (1) mechanical and environmental degradation mechanisms in advanced light metals and composites; (2) aerospace materials science; (3) mechanics of materials and composites for aerospace structures; and (4) thermal gradient structures.

Updates in weight loss surgery and gastrointestinal peptides

DEFF Research Database (Denmark)

Svane, Maria Saur; Bojsen-Møller, Kirstine N; Madsbad, Sten

2015-01-01

PURPOSE OF REVIEW: Roux-en-Y gastric bypass (RYGB) and sleeve gastrectomy are referred to as 'metabolic surgery' due to hormonal shifts with impacts on diabetes remission and weight loss. The purpose of this review is to summarize recent findings in mechanisms underlying beneficial effects...... of weight loss surgery. RECENT FINDINGS: Importantly, gut hormone secretion is altered after RYGB and sleeve gastrectomy due to accelerated transit of nutrients to distal parts of the small intestine, leading to excessive release of L-cell peptide hormones [e.g. glucagon-like peptide-1 (GLP-1), peptide YY......; as demonstrated by relapse of impaired glucose tolerance in studies blocking the GLP-1 receptor by exendin 9-39, and later after major weight loss increased peripheral insulin sensitivity. Gut hormone secretion changes towards a more anorectic profile and is likely important for less caloric intake and weight...

ULE design considerations for a 3m class light weighted mirror blank for E-ELT M5

Science.gov (United States)

Fox, Andrew; Hobbs, Tom; Edwards, Mary; Arnold, Matthew; Sawyer, Kent

2016-07-01

It is expected that the next generation of large ground based astronomical telescopes will need large fast-steering/tip-tilt mirrors made of ultra-lightweight construction. These fast-steering mirrors are used to continuously correct for atmospheric disturbances and telescope vibrations. An example of this is the European Extremely Large Telescope (E-ELT) M5 lightweight mirror, which is part of the Tip-Tilt/Field-Stabilization Unit. The baseline design for the E-ELT M5 mirror, as presented in the E-ELT Construction Proposal, is a closed-back ULE mirror with a lightweight core using square core cells. Corning Incorporated (Corning) has a long history of manufacturing lightweight mirror blanks using ULE in a closed-back construction, going back to the 1960's, and includes the Hubble Space Telescope primary mirror, Subaru Telescope secondary and tertiary mirrors, the Magellan I and II tertiary mirrors, and Kepler Space Telescope primary mirror, among many others. A parametric study of 1-meter class lightweight mirror designs showed that Corning's capability to seal a continuous back sheet to a light-weighted core structure provides superior mirror rigidity, in a near-zero thermal expansion material, relative to other existing technologies in this design space. Corning has investigated the parametric performance of several design characteristics for a 3-meter class lightweight mirror blank for the E-ELT M5. Finite Element Analysis was performed on several design scenarios to obtain weight, areal density, and first Eigen frequency. This paper presents an overview of Corning ULE and lightweight mirror manufacturing capabilities, the parametric performance of design characteristics for 1-meter class and 3-meter class lightweight mirrors, as well as the manufacturing advantages and disadvantages of those characteristics.

Degradation of organic compounds by the combined action of light and microorganisms

International Nuclear Information System (INIS)

Amador, J.A.

1990-01-01

The degradation of organic compounds bound to soil humic acid and of pyridinedicarboxylic acids by the combined action of light and microorganisms was studied. The rate and extent of microbial mineralization of [2 14 C]glycine/humic acid complexes in the dark increased inversely with molecular weight of the molecules. Sunlight irradiation of [ 14 C] glycine/humic acid complexes resulted in loss of UV-light absorbance and an increase in the yield of 14 C-labeled low-molecular weight products. The rate and extent of microbial mineralization were also enhanced by the initial photolysis of the complexes. Greater than half of the radioactivity in the low-molecular-weight photoproducts appeared to be associated with carboxylic acids. Microbial mineralization of the organic carbon increased with integrated solar flux and with the loss of absorbance at 330 nm. Mineralization increased with the percentage of the original complex that was converted to low-molecular weight photoproducts. Only light at wavelengths below 380 nm had an effect on the molecular-weight distribution of the products formed from the glycine/humic acid complexes and on the subsequent microbial mineralization. Irradiation of [U 14 C]aniline/humic acid and of [U- 14 C]phenol/humic acid complexes in sunlight resulted in a loss of UV-light absorbance and an increase in the yield of C-labeled low molecular-weight products. Sunlight irradiation of the [ 14 C]aniline/humic acid complexes had no effect on their subsequent mineralization, but sunlight irradiation enhanced the rate and extent of mineralization of the [ 14 C]phenol/humic acid complexes. The mineralization of phenol/humic acid complexes increased with integrated solar flux and was proportional to the percentage of the original complex that was converted to low-molecular-weight photoproducts

Insulin association in neutral solutions studied by light scattering

DEFF Research Database (Denmark)

Hvidt, S.

1991-01-01

Molecular weights and weight distributions of sulfated, Zn-free, and 2Zn insulins have been measured at pH 7.3 as a function of concentration from 0.1 to 2 mg/ml by use of a combination of light scattering, refractometry, and size-exclusion chromatography. Results show that sulfated insulin...

Body weight reduction and metformin: Roles in polycystic ovary syndrome.

Science.gov (United States)

Al-Nozha, Omar; Habib, Fawziah; Mojaddidi, Moaz; El-Bab, Mohamed Fath

2013-04-01

Polycystic ovary syndrome (PCOS) is a common problem in women at fertile age. A prospective study was conducted to clarify the pathophysiological responses during an application of insulin sensitizer, metformin and weight reduction therapy at the Gynecology Center in Ohud hospital, in AL-Madinah AL-Munawarah, Kingdom of Saudi Arabia. Twenty healthy women served as controls and 180 PCOS women divided into three groups participated in the study. First group was treated with Clomid citrate 100mg/day from the 2nd day of menses to the 6th day plus gonadotrophin from day three to the 13th. Group II was treated as group I plus 850mg metformin twice a day and group III was treated as group I plus weight reduction. Clinical symptoms, menstrual pattern, hirsutism, blood glucose, body mass index, waist-to-hip ratio, insulin, hormonal, and lipid profiles were assessed pre- and post treatment. Insulin resistance was calculated. PCOS women had significantly higher values than the healthy women in most of the measurements. Metformin and weight reduction therapy resulted in a significant decrease in the fasting insulin, glucose/insulin ratio and HOMA-IR. Metformin and weight reduction therapy resulted in a significant decrease in the lipid parameters, testosterone, LH/FSH ratio, SHBG, and prolactin levels. HOMA-IR was significantly higher in women with PCOS. HOMA-IR was positively correlated with testosterone, estradiol, TG, total cholesterol and LDL-cholesterol parameters, and negatively correlated with HDL-cholesterol and FSH levels. Metformin therapy and weight reduction had favorable influences on the basic metabolic and hormonal profiles in women with PCOS and that metformin and lifestyle modification (weight reduction via diet restriction or exercise) resulted in a significantly greater weight loss than hormonal therapy alone. Metformin and weight reduction therapy decreased also hyperandrogenism and insulin resistance. Copyright © 2013 Elsevier Ireland Ltd. All rights

Micronutrient Gaps in Three Commercial Weight-Loss Diet Plans

Directory of Open Access Journals (Sweden)

Matthew G. Engel

2018-01-01

Full Text Available Weight-loss diets restrict intakes of energy and macronutrients but overlook micronutrient profiles. Commercial diet plans may provide insufficient micronutrients. We analyzed nutrient profiles of three plans and compared their micronutrient sufficiency to Dietary Reference Intakes (DRIs for male U.S. adults. Hypocaloric vegan (Eat to Live-Vegan, Aggressive Weight Loss; ETL-VAWL, high-animal-protein low-carbohydrate (Fast Metabolism Diet; FMD and weight maintenance (Eat, Drink and Be Healthy; EDH diets were evaluated. Seven single-day menus were sampled per diet (n = 21 menus, 7 menus/diet and analyzed for 20 micronutrients with the online nutrient tracker CRON-O-Meter. Without adjustment for energy intake, the ETL-VAWL diet failed to provide 90% of recommended amounts for B12, B3, D, E, calcium, selenium and zinc. The FMD diet was low (<90% DRI in B1, D, E, calcium, magnesium and potassium. The EDH diet met >90% DRIs for all but vitamin D, calcium and potassium. Several micronutrients remained inadequate after adjustment to 2000 kcal/day: vitamin B12 in ETL-VAWL, calcium in FMD and EDH and vitamin D in all diets. Consistent with previous work, micronutrient deficits are prevalent in weight-loss diet plans. Special attention to micronutrient rich foods is required to reduce risk of micronutrient deficiency in design of commercial diets.

NMR and GC-MS based metabolic profiling and free-radical scavenging activities of Cordyceps pruinosa mycelia cultivated under different media and light conditions.

Directory of Open Access Journals (Sweden)

Taek-Joo Oh

Full Text Available Variation of metabolic profiles in Cordyceps pruinosa mycelia cultivated under various media and light conditions was investigated using 1H nuclear magnetic resonance (NMR analysis and gas chromatography mass spectrometry (GC-MS with multivariate statistical analysis. A total of 71 metabolites were identified (5 alcohols, 21 amino acids, 15 organic acids, 4 purines, 3 pyrimidines, 7 sugars, 11 fatty acids, and 5 other metabolites by NMR and GC-MS analysis. The mycelia grown in nitrogen media and under dark conditions showed the lowest growth and ergosterol levels, essential to a functional fungal cell membrane; these mycelia, however, had the highest levels of putrescine, which is involved in abiotic stress tolerance. In contrast, mycelia cultivated in sabouraud dextrose agar with yeast extract (SDAY media and under light conditions contained relatively higher levels of fatty acids, including valeric acid, stearic acid, lignoceric acid, myristic acid, oleic acid, palmitoleic acid, hepadecenoic acid, and linoleic acid. These mycelia also had the highest phenolic content and antioxidant activity, and did not exhibit growth retardation due to enhanced asexual development caused by higher levels of linoleic acid. Therefore, we suggested that a light-enriched environment with SDAY media was more optimal than dark condition for cultivation of C. pruinosa mycelia as biopharmaceutical or nutraceutical resources.

Evaluation of green pepper (Capsicum annuum L.) juice on the weight gain and changes in lipid profile in C57BL/6 mice fed a high-fat diet.

Science.gov (United States)

Kim, Na-Hyung; Park, Seong Hoon

2015-01-01

Capsicum pepper (green pepper, Capsicum annuum L.), a natural product available in many countries, is considered to be a food additive, with healthful or medical applications. The aim of this study was to evaluate green pepper juice for its potential to reduce weight gain and to determine its effects on lipid profiles in C57BL/6 mice fed a high-fat diet. Mice given a high-fat diet with green pepper juice gained significantly less weight and showed a significant decrease in serum triglycerides, total cholesterol, low density lipoproteins, and alanine aminotransferase compared to mice given only a high-fat diet (P juice were similar to those in mice in the control group. In addition, abdominal fat volume (subcutaneous and visceral), which was quantified by using 4.7 T magnetic resonance imaging, including multi-slice spin-echo T2-weighted images, in mice administered a high-fat diet with green pepper juice tended to decrease compared to the fat volume of mice administered only a high-fat diet. These results suggest that green pepper juice, as a drink, may possibly be helpful in reducing weight gain by regulating the levels of serum lipids. © 2014 Society of Chemical Industry.

Circadian and Metabolic Effects of Light: Implications in Weight Homeostasis and Health

Directory of Open Access Journals (Sweden)

Santiago A. Plano

2017-10-01

Full Text Available Daily interactions between the hypothalamic circadian clock at the suprachiasmatic nucleus (SCN and peripheral circadian oscillators regulate physiology and metabolism to set temporal variations in homeostatic regulation. Phase coherence of these circadian oscillators is achieved by the entrainment of the SCN to the environmental 24-h light:dark (LD cycle, coupled through downstream neural, neuroendocrine, and autonomic outputs. The SCN coordinate activity and feeding rhythms, thus setting the timing of food intake, energy expenditure, thermogenesis, and active and basal metabolism. In this work, we will discuss evidences exploring the impact of different photic entrainment conditions on energy metabolism. The steady-state interaction between the LD cycle and the SCN is essential for health and wellbeing, as its chronic misalignment disrupts the circadian organization at different levels. For instance, in nocturnal rodents, non-24 h protocols (i.e., LD cycles of different durations, or chronic jet-lag simulations might generate forced desynchronization of oscillators from the behavioral to the metabolic level. Even seemingly subtle photic manipulations, as the exposure to a “dim light” scotophase, might lead to similar alterations. The daily amount of light integrated by the clock (i.e., the photophase duration strongly regulates energy metabolism in photoperiodic species. Removing LD cycles under either constant light or darkness, which are routine protocols in chronobiology, can also affect metabolism, and the same happens with disrupted LD cycles (like shiftwork of jetlag and artificial light at night in humans. A profound knowledge of the photic and metabolic inputs to the clock, as well as its endocrine and autonomic outputs to peripheral oscillators driving energy metabolism, will help us to understand and alleviate circadian health alterations including cardiometabolic diseases, diabetes, and obesity.

FANAC - a shape analysis program for resonance parameter extraction from neutron capture data for light and medium-weight nuclei

International Nuclear Information System (INIS)

Froehner, F.H.

1977-11-01

A least-squares shape analysis program is described which is used at the Karlsruhe Nuclear Research Center for the extraction of resonance parameters from high-resolution capture data. The FORTRAN program was written for light to medium-weight or near-magic target nuclei whose cross sections are characterized on one hand by broad s-wave levels with negligible Doppler broadening but pronounced multi-level interference, on the other hand by narrow p-, d- ... wave resonances with negligible multi-level interference but pronounced Doppler broadening. Accordingly the Reich-Moore multi-level formalism without Doppler broadening is used for s-wave levels, and a single-level description with Doppler braodening for p-, d- ... wave levels. Calculated capture yields are resolution broadened. Multiple-collision events are simulated by Monte Carlo techniques. Up to five different time-of-flight capture data sets can be fitted simultaneously for samples containing up to ten isotopes. Input and output examples are given and a FORTRAN list is appended. (orig.)

Molecular Weights of Bovine and Porcine Heparin Samples: Comparison of Chromatographic Methods and Results of a Collaborative Survey

Directory of Open Access Journals (Sweden)

Sabrina Bertini

2017-07-01

Full Text Available In a collaborative study involving six laboratories in the USA, Europe, and India the molecular weight distributions of a panel of heparin sodium samples were determined, in order to compare heparin sodium of bovine intestinal origin with that of bovine lung and porcine intestinal origin. Porcine samples met the current criteria as laid out in the USP Heparin Sodium monograph. Bovine lung heparin samples had consistently lower average molecular weights. Bovine intestinal heparin was variable in molecular weight; some samples fell below the USP limits, some fell within these limits and others fell above the upper limits. These data will inform the establishment of pharmacopeial acceptance criteria for heparin sodium derived from bovine intestinal mucosa. The method for MW determination as described in the USP monograph uses a single, broad standard calibrant to characterize the chromatographic profile of heparin sodium on high-resolution silica-based GPC columns. These columns may be short-lived in some laboratories. Using the panel of samples described above, methods based on the use of robust polymer-based columns have been developed. In addition to the use of the USP’s broad standard calibrant for heparin sodium with these columns, a set of conditions have been devised that allow light-scattering detected molecular weight characterization of heparin sodium, giving results that agree well with the monograph method. These findings may facilitate the validation of variant chromatographic methods with some practical advantages over the USP monograph method.

Molecular Weights of Bovine and Porcine Heparin Samples: Comparison of Chromatographic Methods and Results of a Collaborative Survey.

Science.gov (United States)

Bertini, Sabrina; Risi, Giulia; Guerrini, Marco; Carrick, Kevin; Szajek, Anita Y; Mulloy, Barbara

2017-07-19

In a collaborative study involving six laboratories in the USA, Europe, and India the molecular weight distributions of a panel of heparin sodium samples were determined, in order to compare heparin sodium of bovine intestinal origin with that of bovine lung and porcine intestinal origin. Porcine samples met the current criteria as laid out in the USP Heparin Sodium monograph. Bovine lung heparin samples had consistently lower average molecular weights. Bovine intestinal heparin was variable in molecular weight; some samples fell below the USP limits, some fell within these limits and others fell above the upper limits. These data will inform the establishment of pharmacopeial acceptance criteria for heparin sodium derived from bovine intestinal mucosa. The method for MW determination as described in the USP monograph uses a single, broad standard calibrant to characterize the chromatographic profile of heparin sodium on high-resolution silica-based GPC columns. These columns may be short-lived in some laboratories. Using the panel of samples described above, methods based on the use of robust polymer-based columns have been developed. In addition to the use of the USP's broad standard calibrant for heparin sodium with these columns, a set of conditions have been devised that allow light-scattering detected molecular weight characterization of heparin sodium, giving results that agree well with the monograph method. These findings may facilitate the validation of variant chromatographic methods with some practical advantages over the USP monograph method.

Enhanced Interferometry with Programmable Spatial Light Modulator

Science.gov (United States)

2010-06-07

Interferometry, Spatial Light Modulator, Surface Accuracy, Optics, Mirror, Zernike , Freeform Optics, Null Testing, Hartman, Wavefront 16. SECURITY...S L M P ix e l- c a m Tilted Flat Mirror L a s e r PV. ± 3.4 λ -Tilt by the flat mirror, ~7 waves ~ 14 fringes Interferogram 3D view (Various...Interferogram ( 3D view) x- profile y- profile (Various waveplates and telescopes not shown) SLM can compensate tilted wavefronts with an accuracy of

Effect of media composition and light supply on biomass, lipid content and FAME profile for quality biofuel production from Scenedesmus abundans

International Nuclear Information System (INIS)

Rai, Monika Prakash; Gupta, Shivani

2017-01-01

Highlights: • S. abundans lipids have the potential to produce high quality biodiesel. • Maximum growth and lipid production were observed in Fogg’s medium without nitrogen. • Light intensity and photoperiod are found influential parameters for high lipid accumulation (48.12%). • FAME profile shows elevated levels of C16:0, C8:1 and C18:2 (biodiesel precursors) under optimized culture conditions. • S. abundans biodiesel properties meets international biodiesel standards. - Abstract: Microalgae have a potential to serve as a renewable feedstock for synthesis of biodiesel, rich in saturated and unsaturated fatty acids and valuable biomolecules. Role of several parameters such as nutrient composition, light intensity, photoperiod and pH on growth and lipid productivity was investigated. A freshwater green microalga Scenedesmus abundans was selected as a potential candidate for production of biodiesel and its growth conditions were optimized for enhanced lipid accumulation. The lipid content of the strain has been increased up to about 48% when grown in modified Fogg’s medium at pH 8 with light intensity of 40.5 μmol m"−"2 s"−"1 and photoperiod of 16 h light:8 h dark. Lipids were transesterified and the fatty acid methyl esters (FAME) thus obtained were analyzed by GC–MS. They possess more than 80% of C_1_6 to C_1_8 fatty acids, which are major precursors for biodiesel production. The FAME consisted of saturated (47.83%), monounsaturated (26.38%) and polyunsaturated (25.20%) fatty acids. Several important biodiesel quality parameters were predicted and compared to the corresponding specifications in the American and European biodiesel standards. The study opens up new vistas for utilization of the microalga, S. abundans for efficient production of biodiesel.

Effects of light intensity and quality on phycobiliprotein accumulation in the cyanobacterium Nostoc sphaeroides Kützing.

Science.gov (United States)

Ma, Rui; Lu, Fan; Bi, Yonghong; Hu, Zhengyu

2015-08-01

To assess the effects of light intensity and quality on the growth and phycobiliproteins (PBP) accumulation in Nostoc sphaeroides Kützing (N. sphaeroides). Dry weights, dry matter, protein, chlorophyll and PBP contents were higher under 90 μmol m(-2) s(-1) than under other intensities (both higher and lower). Phycocyanin and allophycocyanin increased with light intensity while phycoerythrin decreased. Fresh weights, protein and PBP contents increased at the highest rates under blue light. Red light resulted in higher values of dry matter, phycocyanin and chlorophyll a. White light at 90 μmol m(-2) s(-1) or blue light 30 μmol m(-2) s(-1) were optimal for the growth and phycobiliprotein accumulation in N. sphaeroides.

Compton profile with synchrotron light - application to Y-123 superconductivity

International Nuclear Information System (INIS)

De, Udayan

2005-01-01

Electron beam accelerated to 6 GeV in the European Synchrotron Radiation Facility (ESRF) at Grenoble, France, can deliver highly mono-energetic, intense (10 12 photons/sec at sample at 100 mA ring current) and fine photon beam reaching x-ray and γ energies. So photons of 57 keV from this synchrotron has been used for Compton Profile or CP experiment (at different temperatures down to 70 K) on our YBa 2 Cu 3 O 7 or Y-123 single crystals with T c = 91 K. Photons, Compton scattered even at a definite angle, θ, show a distribution (called Compton Profile) of energy and hence of momentum reflecting the EMD or electron momentum distribution in the solid. The temperature variation of S-parameter, defined as the fraction of low momentum electrons, has been found from preliminary CP data. It confirmed the surprising double minimum found from Doppler broadening of positron annihilation radiation lineshape (DBPARL). The CP set-up at the synchrotron including the detectors and cryogenics as well as the new results are outlined. (author)

Light-fuelled transport of large dendrimers and proteins.

Science.gov (United States)

Koskela, Jenni E; Liljeström, Ville; Lim, Jongdoo; Simanek, Eric E; Ras, Robin H A; Priimagi, Arri; Kostiainen, Mauri A

2014-05-14

This work presents a facile water-based supramolecular approach for light-induced surface patterning. The method is based upon azobenzene-functionalized high-molecular weight triazine dendrimers up to generation 9, demonstrating that even very large globular supramolecular complexes can be made to move in response to light. We also demonstrate light-fuelled macroscopic movements in native biomolecules, showing that complexes of apoferritin protein and azobenzene can effectively form light-induced surface patterns. Fundamentally, the results establish that thin films comprising both flexible and rigid globular particles of large diameter can be moved with light, whereas the presented material concepts offer new possibilities for the yet marginally explored biological applications of azobenzene surface patterning.

Light-Weight Radioisotope Heater Unit Safety Analysis Report (LWRHU-SAR). Volume I. A. Introduction and executive summary. B. Reference Design Document (RDD)

International Nuclear Information System (INIS)

Johnson, E.W.

1985-10-01

The orbiter and probe portions of the NASA Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Nuclear Projects (OSNP) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulate mission failures or malfunctions occur, which would result in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events

Learning Disabilities in Extremely Low Birth Weight Children and Neurodevelopmental Profiles at Preschool Age.

Science.gov (United States)

Squarza, Chiara; Picciolini, Odoardo; Gardon, Laura; Giannì, Maria L; Murru, Alessandra; Gangi, Silvana; Cortinovis, Ivan; Milani, Silvano; Mosca, Fabio

2016-01-01

At school age extremely low birth weight (ELBW) and extremely low gestational age (ELGAN) children are more likely to show Learning Disabilities (LDs) and difficulties in emotional regulation. The aim of this study was to investigate the incidence of LDs at school age and to detect neurodevelopmental indicators of risk for LDs at preschool ages in a cohort of ELBW/ELGAN children with broadly average intelligence. All consecutively newborns 2001-2006 admitted to the same Institution entered the study. Inclusion criteria were BW disabilities, genetic abnormalities, and/or a Developmental Quotient below normal limits (learning disabilities at school age was investigated through a parent-report questionnaire at children's age range 9-10 years. Neurodevelopmental profiles were assessed through the Griffiths Mental Development Scales at 1 and 2 years of corrected age and at 3, 4, 5, and 6 years of chronological age and were analyzed comparing two groups of children: those with LDs and those without. At school age 24 on 102 (23.5%) of our ELBW/ELGAN children met criteria for LDs in one or more areas, with 70.8% comorbidity with emotional/attention difficulties. Children with LDs scored significantly lower in the Griffiths Locomotor and Language subscales at 2 years of corrected age and in the Personal-social, Performance and Practical Reasoning subscales at 5 years of chronological age. Our findings suggest that, among the early developmental indicators of adverse school outcome, there is a poor motor experimentation, language delay, and personal-social immaturity. Cognitive rigidity and poor ability to manage practical situations also affect academic attainment. Timely detection of these early indicators of risk is crucial to assist the transition to school.

Effect of 3D Polarization profiles on polarization measurements and colliding beam experiments

Energy Technology Data Exchange (ETDEWEB)

Fischer, W.; Bazilevsky, A.

2011-08-18

The development of polarization profiles are the primary reason for the loss of average polarization. Polarization profiles have been parametrized with a Gaussian distribution. We derive the effect of 3-dimensional polarization profiles on the measured polarization in polarimeters, as well as the observed polarization and the figure of merit in single and double spin experiments. Examples from RHIC are provided. The Relativistic Heavy Ion Collider (RHIC) is the only collider of spin polarized protons. During beam acceleration and storage profiles of the polarization P develop, which affect the polarization measured in a polarimeter, and the polarization and figure of merit (FOM) in colliding beam experiments. We calculate these for profiles in all dimensions, and give examples for RHIC. Like in RHIC we call the two colliding beams Blue and Yellow. We use the overbar to designate intensity-weighted averages in polarimeters (e.g. {bar P}), and angle brackets to designate luminosity-weighted averages in colliding beam experiments (e.g.

).

Effect of 3D Polarization profiles on polarization measurements and colliding beam experiments

International Nuclear Information System (INIS)

Fischer, W.; Bazilevsky, A.

2011-01-01

The development of polarization profiles are the primary reason for the loss of average polarization. Polarization profiles have been parametrized with a Gaussian distribution. We derive the effect of 3-dimensional polarization profiles on the measured polarization in polarimeters, as well as the observed polarization and the figure of merit in single and double spin experiments. Examples from RHIC are provided. The Relativistic Heavy Ion Collider (RHIC) is the only collider of spin polarized protons. During beam acceleration and storage profiles of the polarization P develop, which affect the polarization measured in a polarimeter, and the polarization and figure of merit (FOM) in colliding beam experiments. We calculate these for profiles in all dimensions, and give examples for RHIC. Like in RHIC we call the two colliding beams Blue and Yellow. We use the overbar to designate intensity-weighted averages in polarimeters (e.g. (bar P)), and angle brackets to designate luminosity-weighted averages in colliding beam experiments (e.g. ).

Angiogenic Factor Profiles in Pregnant Women With a History of Early-Onset Severe Preeclampsia Receiving Low-Molecular-Weight Heparin Prophylaxis.

Science.gov (United States)

Lecarpentier, Edouard; Gris, Jean Christophe; Cochery-Nouvellon, Eva; Mercier, Erick; Touboul, Cyril; Thadhani, Ravi; Karumanchi, S Ananth; Haddad, Bassam

2018-01-01

To evaluate whether daily low-molecular-weight (LMW) heparin prophylaxis during pregnancy alters profile of circulating angiogenic factors that have been linked with the pathogenesis of preeclampsia and fetal growth restriction. This is a planned ancillary study of the Heparin-Preeclampsia trial, a randomized trial in pregnant women with a history of severe early-onset preeclampsia (less than 34 weeks of gestation). In the parent study, all women were treated with aspirin and then randomized to receive LMW heparin or aspirin alone. In this study, we measured serum levels of circulating angiogenic factors (soluble fms-like tyrosine kinase-1, placental growth factor, and soluble endoglin by immunoassay) at the following gestational windows: 10-13 6/7 weeks, 14-17 6/7 weeks, 18-21 6/7 weeks, 22-25 6/7 weeks, 26-29 6/7 weeks, 30-33 6/7 weeks, and 34-37 6/7 weeks. Samples were available from 185 patients: LMW heparin+aspirin (n=92) and aspirin alone (n=93). The two groups had comparable baseline characteristics and had similar adverse composite outcomes (35/92 [38.0%] compared with 36/93 [38.7%]; P=.92). There were no significant differences in serum levels of soluble fms-like tyrosine kinase-1, placental growth factor, and soluble endoglin in the participants who received LMW heparin and aspirin compared with those who received aspirin alone regardless of gestational age period. Finally, women who developed an adverse composite outcome at less than 34 weeks of gestation demonstrated significant alterations in serum angiogenic profile as early as 10-13 6/7 weeks that was most dramatic 6-8 weeks preceding delivery. Prophylactic LMW heparin therapy when beginning from before 14 weeks of gestation with aspirin during pregnancy is not associated with an improved angiogenic profile. This may provide a molecular explanation for the lack of clinical benefit noted in recent trials. ClinicalTrials.gov, NCT00986765.

Shedding light on cell compartmentation in the candidate phylum Poribacteria by high resolution visualisation and transcriptional profiling

KAUST Repository

Jahn, Martin T.

2016-10-31

Assigning functions to uncultivated environmental microorganisms continues to be a challenging endeavour. Here, we present a new microscopy protocol for fluorescence in situ hybridisation-correlative light and electron microscopy (FISH-CLEM) that enabled, to our knowledge for the first time, the identification of single cells within their complex microenvironment at electron microscopy resolution. Members of the candidate phylum Poribacteria, common and uncultivated symbionts of marine sponges, were used towards this goal. Cellular 3D reconstructions revealed bipolar, spherical granules of low electron density, which likely represent carbon reserves. Poribacterial activity profiles were retrieved from prokaryotic enriched sponge metatranscriptomes using simulation-based optimised mapping. We observed high transcriptional activity for proteins related to bacterial microcompartments (BMC) and we resolved their subcellular localisation by combining FISH-CLEM with immunohistochemistry (IHC) on ultra-thin sponge tissue sections. In terms of functional relevance, we propose that the BMC-A region may be involved in 1,2-propanediol degradation. The FISH-IHC-CLEM approach was proven an effective toolkit to combine -omics approaches with functional studies and it should be widely applicable in environmental microbiology.

Weight-based discrimination: an ubiquitary phenomenon?

Science.gov (United States)

Sikorski, C; Spahlholz, J; Hartlev, M; Riedel-Heller, S G

2016-02-01

Despite strong indications of a high prevalence of weight-related stigmatization in individuals with obesity, limited attention has been given to the role of weight discrimination in examining the stigma obesity. Studies, up to date, rely on a limited basis of data sets and additional studies are needed to confirm the findings of previous studies. In particular, data for Europe are lacking, and are needed in light of a recent ruling of the European Court of Justice that addressed weight-based discrimination. The data were derived from a large representative telephone survey in Germany (n=3003). The dependent variable, weight-based discrimination, was assessed with a one-item question. The lifetime prevalence of weight discrimination across different sociodemographic variables was determined. Logistic regression models were used to assess the association of independent and dependent variables. A sub-group analysis was conducted analyzing all participants with a body mass index ⩾25 kg m(-)(2). The overall prevalence of weight-based discrimination was 7.3%. Large differences, however, were observed regarding weight status. In normal weight and overweight participants the prevalence was 5.6%, but this number doubled in participants with obesity class I (10.2%), and quadrupled in participants with obesity class II (18.7%) and underweight (19.7%). In participants with obesity class III, every third participant reported accounts of weight-based discrimination (38%). In regression models, after adjustment, the associations of weight status and female gender (odds ratio: 2.59, PDiscrimination seems to be an ubiquitary phenomenon at least for some groups that are at special risk, such as heavier individuals and women. Our findings therefore emphasize the need for research and intervention on weight discrimination among adults with obesity, including anti-discrimination legislation.

Proteomics reveals the effects of sustained weight loss on the human plasma proteome

DEFF Research Database (Denmark)

Geyer, Philipp E; Wewer Albrechtsen, Nicolai J; Tyanova, Stefka

2016-01-01

Sustained weight loss is a preferred intervention in a wide range of metabolic conditions, but the effects on an individual's health state remain ill-defined. Here, we investigate the plasma proteomes of a cohort of 43 obese individuals that had undergone 8 weeks of 12% body weight loss followed...... by a year of weight maintenance. Using mass spectrometry-based plasma proteome profiling, we measured 1,294 plasma proteomes. Longitudinal monitoring of the cohort revealed individual-specific protein levels with wide-ranging effects of losing weight on the plasma proteome reflected in 93 significantly...

Body weight has no impact on self-esteem of minority children living in inner city, low-income neighborhoods: a cross-sectional study

Science.gov (United States)

The relationship between body weight and self-esteem among underserved minority children is not well documented. We measured the self-esteem profile using the Self-Perception Profile for Children among 910 minority children at 17 Houston community centers. Weight status had no effect on any of the s...

Weight-specific anticipatory coding of grip force in human dorsal premotor cortex

DEFF Research Database (Denmark)

van Nuenen, Bart F L; Kuhtz-Buschbeck, Johann; Schulz, Christian

2012-01-01

, using either continuous theta burst stimulation (cTBS) at 80% (inhibitory cTBS) or 30% (sham cTBS) of active motor threshold. The conditioning effects of cTBS on preparatory brain activity were assessed with functional MRI, while participants lifted a light or heavy weight in response to a go-cue (S2......). An additional pre-cue (S1) correctly predicted the weight in 75% of the trials. Participants were asked to use this prior information to prepare for the lift. In the sham condition, grip force showed a consistent undershoot, if the S1 incorrectly prompted the preparation of a light lift. Likewise, an S1...... during object lifting....

Integrated porous-silicon light-emitting diodes: A fabrication process using graded doping profiles

International Nuclear Information System (INIS)

Barillaro, G.; Diligenti, A.; Pieri, F.; Fuso, F.; Allegrini, M.

2001-01-01

A fabrication process, compatible with an industrial bipolar+complementary metal - oxide - semiconductor (MOS)+diffusion MOS technology, has been developed for the fabrication of efficient porous-silicon-based light-emitting diodes. The electrical contact is fabricated with a double n + /p doping, achieving a high current injection efficiency and thus lower biasing voltages. The anodization is performed as the last step of the process, thus reducing potential incompatibilities with industrial processes. The fabricated devices show yellow-orange electroluminescence, visible with the naked eye in room lighting. A spectral characterization of light emission is presented and briefly discussed. [copyright] 2001 American Institute of Physics

Sensitivity of the OMI ozone profile retrieval (OMO3PR) to a priori assumptions

NARCIS (Netherlands)

Mielonen, T.; De Haan, J.F.; Veefkind, J.P.

2014-01-01

We have assessed the sensitivity of the operational OMI ozone profile retrieval (OMO3PR) algorithm to a number of a priori assumptions. We studied the effect of stray light correction, surface albedo assumptions and a priori ozone profiles on the retrieved ozone profile. Then, we studied how to

Microscale profiling of photosynthesis-related variables in a highly productive biofilm photobioreactor.

Science.gov (United States)

Li, Tong; Piltz, Bastian; Podola, Björn; Dron, Anthony; de Beer, Dirk; Melkonian, Michael

2016-05-01

In the present study depth profiles of light, oxygen, pH and photosynthetic performance in an artificial biofilm of the green alga Halochlorella rubescens in a porous substrate photobioreactor (PSBR) were recorded with microsensors. Biofilms were exposed to different light intensities (50-1,000 μmol photons m(-2) s(-1) ) and CO2 levels (0.04-5% v/v in air). The distribution of photosynthetically active radiation showed almost identical trends for different surface irradiances, namely: a relatively fast drop to a depth of about 250 µm, (to 5% of the incident), followed by a slower decrease. Light penetrated into the biofilm deeper than the Lambert-Beer Law predicted, which may be attributed to forward scattering of light, thus improving the overall light availability. Oxygen concentration profiles showed maxima at a depth between 50 and 150 μm, depending on the incident light intensity. A very fast gas exchange was observed at the biofilm surface. The highest oxygen concentration of 3.2 mM was measured with 1,000 μmol photons m(-2) s(-1) and 5% supplementary CO2. Photosynthetic productivity increased with light intensity and/or CO2 concentration and was always highest at the biofilm surface; the stimulating effect of elevated CO2 concentration in the gas phase on photosynthesis was enhanced by higher light intensities. The dissolved inorganic carbon concentration profiles suggest that the availability of the dissolved free CO2 has the strongest impact on photosynthetic productivity. The results suggest that dark respiration could explain previously observed decrease in growth rate over cultivation time in this type of PSBR. Our results represent a basis for understanding the complex dynamics of environmental variables and metabolic processes in artificial phototrophic biofilms exposed to a gas phase and can be used to improve the design and operational parameters of PSBRs. © 2015 Wiley Periodicals, Inc.

The effect of body-weight and obesity bias on children’s self-esteem

OpenAIRE

Kornilaki, Ekaterina N.

2014-01-01

The aims of this study were: a) to compare the self-esteem of obese children and normal–weight controls, and b) to examine whether obesity bias moderates the relationship between weight status and self-esteem. Fifty three normal-weight and forty 11-year-old obese children were administered Harter’s (1985) Self-Perception Profile for Children (SPPC), which consists of a global self-worth subscale and five domain-specific subscales that measure scholastic competence, social acceptance, athletic...

Two-dimensional analytic weighting functions for limb scattering

Science.gov (United States)

Zawada, D. J.; Bourassa, A. E.; Degenstein, D. A.

2017-10-01

Through the inversion of limb scatter measurements it is possible to obtain vertical profiles of trace species in the atmosphere. Many of these inversion methods require what is often referred to as weighting functions, or derivatives of the radiance with respect to concentrations of trace species in the atmosphere. Several radiative transfer models have implemented analytic methods to calculate weighting functions, alleviating the computational burden of traditional numerical perturbation methods. Here we describe the implementation of analytic two-dimensional weighting functions, where derivatives are calculated relative to atmospheric constituents in a two-dimensional grid of altitude and angle along the line of sight direction, in the SASKTRAN-HR radiative transfer model. Two-dimensional weighting functions are required for two-dimensional inversions of limb scatter measurements. Examples are presented where the analytic two-dimensional weighting functions are calculated with an underlying one-dimensional atmosphere. It is shown that the analytic weighting functions are more accurate than ones calculated with a single scatter approximation, and are orders of magnitude faster than a typical perturbation method. Evidence is presented that weighting functions for stratospheric aerosols calculated under a single scatter approximation may not be suitable for use in retrieval algorithms under solar backscatter conditions.

Evaluation of novel disposable, light-weight radiation protection devices in an interventional radiology setting: a randomized controlled trial.

Science.gov (United States)

Uthoff, Heiko; Peña, Constantino; West, James; Contreras, Francisco; Benenati, James F; Katzen, Barry T

2013-04-01

Radiation exposure to interventionalists is increasing. The currently available standard radiation protection devices are heavy and do not protect the head of the operator. The aim of this study was to evaluate the effectiveness and comfort of caps and thyroid collars made of a disposable, light-weight, lead-free material (XPF) for occupational radiation protection in a clinical setting. Up to two interventional operators were randomized to wear a XPF or standard 0.5-mm lead-equivalent thyroid collars in 60 consecutive endovascular procedures requiring fluoroscopy. Simultaneously a XPF cap was worn by all operators. Radiation doses were measured using dosimeters placed outside and underneath the caps and thyroid collars. Wearing comfort was assessed at the end of each procedure on a visual analog scale (0-100 [100 = optimal]). Patient and procedure data did not differ between the XPF and standard protection groups. The cumulative radiation dose measured outside the cap was 15,700 μSv and outside the thyroid collars 21,240 μSv. Measured radiation attenuation provided by the XPF caps (n = 70), XPF thyroid collars (n = 40), and standard thyroid collars (n = 38) was 85.4% ± 25.6%, 79.7% ± 25.8% and 71.9% ± 34.2%, respectively (mean difference XPF vs standard thyroid collars, 7.8% [95% CI, -5.9% to 21.6%]; p = 0.258). The median XPF cap weight was 144 g (interquartile range, 128-170 g), and the XPF thyroid collars were 27% lighter than the standard thyroid collars (p disposable caps and thyroid collars made of XPF were assessed as being comfortable to wear, and they provide radiation protection similar to that of standard 0.5-mm lead-equivalent thyroid collars.

Prevalence of Stress References on College Freshmen Facebook Profiles

OpenAIRE

EGAN, KATIE G.; MORENO, MEGAN A.

2011-01-01

Stress is common among college students and associated with adverse health outcomes. This study used the social networking Web site Facebook to identify self-reported stress and associated conditions among college students. Public Facebook profiles of undergraduate freshman at a large Midwestern State University (n = 300) were identified using a Facebook search. Content analysis of Facebook profiles included demographic information and displayed references to stress, weight concerns, depressi...

Improvement in the performance of graphene nanoribbon p-i-n tunneling field effect transistors by applying lightly doped profile on drain region

Science.gov (United States)

Naderi, Ali

2017-12-01

In this paper, an efficient structure with lightly doped drain region is proposed for p-i-n graphene nanoribbon field effect transistors (LD-PIN-GNRFET). Self-consistent solution of Poisson and Schrödinger equation within Nonequilibrium Green’s function (NEGF) formalism has been employed to simulate the quantum transport of the devices. In proposed structure, source region is doped by constant doping density, channel is an intrinsic GNR, and drain region contains two parts with lightly and heavily doped doping distributions. The important challenge in tunneling devices is obtaining higher current ratio. Our simulations demonstrate that LD-PIN-GNRFET is a steep slope device which not only reduces the leakage current and current ratio but also enhances delay, power delay product, and cutoff frequency in comparison with conventional PIN GNRFETs with uniform distribution of impurity and with linear doping profile in drain region. Also, the device is able to operate in higher drain-source voltages due to the effectively reduced electric field at drain side. Briefly, the proposed structure can be considered as a more reliable device for low standby-power logic applications operating at higher voltages and upper cutoff frequencies.

2018 DOE Solid-State Lighting Project Portfolio

Energy Technology Data Exchange (ETDEWEB)

None

2018-01-31

The 2018 Solid-State Lighting Project Portfolio provides an overview of all SSL projects that have been funded by DOE since 2000. Projects that were active during 2017 are found in the main body of this report, and all historic projects can be found in the appendix. Within these sections, project profiles are sorted by technology type (i.e., LED or OLED) and then by performer name. A profile is provided on each project. Each profile includes a brief technical description, as well as information about project partners, funding, and the research period. This report is updated annually, although the research described in the Portfolio changes periodically as new projects are initiated and existing ones are concluded.

Doping profile measurement on textured silicon surface

Science.gov (United States)

Essa, Zahi; Taleb, Nadjib; Sermage, Bernard; Broussillou, Cédric; Bazer-Bachi, Barbara; Quillec, Maurice

2018-04-01

In crystalline silicon solar cells, the front surface is textured in order to lower the reflection of the incident light and increase the efficiency of the cell. This texturing whose dimensions are a few micrometers wide and high, often makes it difficult to determine the doping profile measurement. We have measured by secondary ion mass spectrometry (SIMS) and electrochemical capacitance voltage profiling the doping profile of implanted phosphorus in alkaline textured and in polished monocrystalline silicon wafers. The paper shows that SIMS gives accurate results provided the primary ion impact angle is small enough. Moreover, the comparison between these two techniques gives an estimation of the concentration of electrically inactive phosphorus atoms.

Compact high efficiency, light weight 200-800 MHz high power RF source

International Nuclear Information System (INIS)

Shrader, M.B.; Preist, D.H.

1985-01-01

There has long been a need for a new more efficient less bulky high power RF power source to drive accelerators in the 200 to 800 MHz region. Results on a recent 5-year EIMAC sponsored R and D program which have lead to the introduction of the Klystrode for UHF television and troposcatter applications indicate that at power levels of 1MW or more efficiencies in excess of 75% can be obtained at 450 MHz. Efficiencies of this order coupled with potential size and weight parameters which are a fraction of those of existing high power UHF generators open up new applications which heretofore would have been impractical if not impossible. Measurements at 470 MHz on existing Klystrodes are given. Projected operating conditions for a 1MW 450 MHz Klystrode having an overall length of 60 inches and a total tube, circuit, and magnet weight of 250 pounds is presented

Microclimate influence on mineral and metabolic profiles of grape berries.

Science.gov (United States)

Pereira, G E; Gaudillere, J-P; Pieri, P; Hilbert, G; Maucourt, M; Deborde, C; Moing, A; Rolin, D

2006-09-06

The grape berry microclimate is known to influence berry quality. The effects of the light exposure of grape berry clusters on the composition of berry tissues were studied on the "Merlot" variety grown in a vineyard in Bordeaux, France. The light exposure of the fruiting zone was modified using different intensities of leaf removal, cluster position relative to azimuth, and berry position in the cluster. Light exposures were identified and classified by in situ measurements of berry temperatures. Berries were sampled at maturity (>19 Brix) for determination of skin and/or pulp chemical and metabolic profiles based on (1) chemical and physicochemical measurement of minerals (N, P, K, Ca, Mg), (2) untargeted 1H NMR metabolic fingerprints, and HPLC targeted analyses of (3) amino acids and (4) phenolics. Each profile defined by partial least-square discriminant analysis allowed us to discriminate berries from different light exposure. Discriminant compounds between shaded and light-exposed berries were quercetin-3-glucoside, kaempferol-3-glucoside, myricetin-3-glucoside, and isorhamnetin-3-glucoside for the phenolics, histidine, valine, GABA, alanine, and arginine for the amino acids, and malate for the organic acids. Capacities of the different profiling techniques to discriminate berries were compared. Although the proportion of explained variance from the 1H NMR fingerprint was lower compared to that of chemical measurements, NMR spectroscopy allowed us to identify lit and shaded berries. Light exposure of berries increased the skin and pulp flavonols, histidine and valine contents, and reduced the organic acids, GABA, and alanine contents. All the targeted and nontargeted analytical data sets used made it possible to discriminate sun-exposed and shaded berries. The skin phenolics pattern was the most discriminating and allowed us to sort sun from shade berries. These metabolite classes can be used to qualify berries collected in an undetermined environment. The

Dynamics of an SAITS alcoholism model on unweighted and weighted networks

Science.gov (United States)

Huo, Hai-Feng; Cui, Fang-Fang; Xiang, Hong

2018-04-01

A novel SAITS alcoholism model on networks is introduced, in which alcoholics are divided into light problem alcoholics and heavy problem alcoholics. Susceptible individuals can enter into the compartment of heavy problem alcoholics directly by contacting with light problem alcoholics or heavy problem alcoholics and the heavy problem alcoholics who receive treatment can relapse into the compartment of heavy problem alcoholics are also considered. First, the dynamics of our model on unweighted networks, including the basic reproduction number, existence and stability of equilibria are studied. Second, the models with fixed weighted and adaptive weighted networks are introduced and investigated. At last, some simulations are presented to illustrate and extend our results. Our results show that it is very important to treat alcoholics to quit the drinking.

GENDER AND POVERTY: SOCIO-PSYCHOLOGICAL ANALYSIS OF FEMALE ROLE MODELS AND VULNERABILITY PROFILES

Directory of Open Access Journals (Sweden)

Antonella RISSOTTO

2010-07-01

Full Text Available The contribution regards an analysis of gender-related role models and their relevance for poverty. Data were gathered using a semi-structured questionnaire. Poverty as a function of gender is interpreted in the present case in the light of the interrelation between economic disadvantages, inherent in the sy stems of integration, an d social exclusion, with special reference to the family and the labour market. From this point of view, the concept of dependence represents a strategic concept that may be broken down into the dimensions of: - economic (income source; - material (non economic help in the management of the family. It will be shown how gender models have a statistically significant weight in the distribution of a greater or lesser degree of dependence. Economic dependence and material dependence may be related back to two empirical typological indexes, wh ich summarize a set of semantically relevant indicators. Also an additional index of economic hardship has been constructed, which also summarizes specific indicators. In addition to gender profiles, the analysis takes into account specific categories of women, focusing attention on subjects that are potentially vulnerable to poverty (elderly women, women with precarious jobs and divorcees defining their specific profiles.

Metallic coating deposited by Cold Gas Spray onto Light alhoys

OpenAIRE

Villa Vidaller, Maria

2013-01-01

This thesis focuses on the use of Cold Gas Spray technology (CGS) to spray different nature powders onto light alloys with the aim of increasing their wear resistance. The growing industrial interest for costs reduction (fuel consumption, machinery lifetime, or personal security) has emphasized the necessity to investigate the potential applications that light alloys can offer. Weight reduction is a reason why light metals and its alloys have been associated with strong industries a...

Cord Blood Metabolome Is Highly Associated with Birth Weight, but Less Predictive for Later Weight Development

Directory of Open Access Journals (Sweden)

Christian Hellmuth

2017-04-01

Full Text Available Background/Aims: Fetal metabolism may be changed by the exposure to maternal factors, and the route to obesity may already set in utero. Cord blood metabolites might predict growth patterns and later obesity. We aimed to characterize associations of cord blood with birth weight, postnatal weight gain, and BMI in adolescence. Methods: Over 700 cord blood samples were collected from infants participating in the German birth cohort study LISAplus. Glycerophospholipid fatty acids (GPL-FA, polar lipids, non-esterified fatty acids (NEFA, and amino acids were analyzed with a targeted, liquid chromatography-tandem mass spectrometry based metabolomics platform. Cord blood metabolites were related to growth factors by linear regression models adjusted for confounding variables. Results: Cord blood metabolites were highly associated with birth weight. Lysophosphatidylcholines C16:1, C18:1, C20:3, C18:2, C20:4, C14:0, C16:0, C18:3, GPL-FA C20:3n-9, and GPL-FA C22:5n-6 were positively related to birth weight, while higher cord blood concentrations of NEFA C22:6, NEFA C20:5, GPL-FA C18:3n-3, and PCe C38:0 were associated with lower birth weight. Postnatal weight gain and BMI z-scores in adolescents were not significantly associated with cord blood metabolites after adjustment for multiple testing. Conclusion: Potential long-term programming effects of the intrauterine environment and metabolism on later health cannot be predicted with profiling of the cord blood metabolome.

Influence of stray light for divertor spectroscopy in ITER

International Nuclear Information System (INIS)

Kajita, Shin; Veshchev, Evgeny; Lisgo, Steve; Barnsley, Robin; Morgan, Philip; Walsh, Michael; Ogawa, Hiroaki; Sugie, Tatsuo; Itami, Kiyoshi

2015-01-01

The influence of stray light in the divertor spectroscopy system in ITER is quantitatively investigated using a ray tracing simulation. Simulation results show that the stray light is negligible at positions in the divertor where the plasma emission is strong. However, it is also shown that the stray light can be significantly greater than the real signal if the plasma intensity is low. Deuterium and beryllium emissions are used for the assessment; for beryllium cases in particular, since the emission profile may be non-uniform in the divertor region, the influence of stray light can be non-negligible at some positions, e.g., above the divertor dome

Adaptive Generation and Diagnostics of Linear Few-Cycle Light Bullets

Directory of Open Access Journals (Sweden)

Martin Bock

2013-02-01

Full Text Available Recently we introduced the class of highly localized wavepackets (HLWs as a generalization of optical Bessel-like needle beams. Here we report on the progress in this field. In contrast to pulsed Bessel beams and Airy beams, ultrashort-pulsed HLWs propagate with high stability in both spatial and temporal domain, are nearly paraxial (supercollimated, have fringe-less spatial profiles and thus represent the best possible approximation to linear “light bullets”. Like Bessel beams and Airy beams, HLWs show self-reconstructing behavior. Adaptive HLWs can be shaped by ultraflat three-dimensional phase profiles (generalized axicons which are programmed via calibrated grayscale maps of liquid-crystal-on-silicon spatial light modulators (LCoS-SLMs. Light bullets of even higher complexity can either be freely formed from quasi-continuous phase maps or discretely composed from addressable arrays of identical nondiffracting beams. The characterization of few-cycle light bullets requires spatially resolved measuring techniques. In our experiments, wavefront, pulse and phase were detected with a Shack-Hartmann wavefront sensor, 2D-autocorrelation and spectral phase interferometry for direct electric-field reconstruction (SPIDER. The combination of the unique propagation properties of light bullets with the flexibility of adaptive optics opens new prospects for applications of structured light like optical tweezers, microscopy, data transfer and storage, laser fusion, plasmon control or nonlinear spectroscopy.

Continuous contour phase plates for tailoring the focal plane irradiance profile

International Nuclear Information System (INIS)

Dixit, S.N.; Rushford, M.C.; Thomas, I.M.; Perry, M.D.

1995-01-01

We present fully continuous phase screens for producing super-Gaussian focal-plane irradiance profiles. Such phase screens are constructed with the assumption of either circular symmetric near-field and far-field profiles or a separable phase screen in Cartesian co-ordinates. In each case, the phase screen is only a few waves deep. Under illumination by coherent light, such phase screens produce high order super-Gaussian profiles in the focal plane with high energy content effects of beam aberrations on the focal profiles and their energy content are also discussed

Specific light uptake rates can enhance astaxanthin productivity in Haematococcus lacustris.

Science.gov (United States)

Lee, Ho-Sang; Kim, Z-Hun; Park, Hanwool; Lee, Choul-Gyun

2016-05-01

Lumostatic operation was applied for efficient astaxanthin production in autotrophic Haematococcus lacustris cultures using 0.4-L bubble column photobioreactors. The lumostatic operation in this study was performed with three different specific light uptake rates (q(e)) based on cell concentration, cell projection area, and fresh weight as one-, two- and three-dimensional characteristics values, respectively. The q(e) value from the cell concentration (q(e1D)) obtained was 13.5 × 10⁻⁸ μE cell⁻¹ s⁻¹, and the maximum astaxanthin concentration was increased to 150 % compared to that of a control with constant light intensity. The other optimum q e values by cell projection area (q(e2D)) and fresh weight (q( e3D)) were determined to be 195 μE m⁻² s⁻¹ and 10.5 μE g⁻¹ s⁻¹ for astaxanthin production, respectively. The maximum astaxanthin production from the lumostatic cultures using the parameters controlled by cell projection area (2D) and fresh weight (3D) also increased by 36 and 22% over that of the controls, respectively. When comparing the optimal q e values among the three different types, the lumostatic cultures using q(e) based on fresh weight showed the highest astaxanthin productivity (22.8 mg L⁻¹ day⁻¹), which was a higher level than previously reported. The lumostatic operations reported here demonstrated that more efficient and effective astaxanthin production was obtained by H. lacustris than providing a constant light intensity, regardless of which parameter is used to calculate the specific light uptake rate.

Mobile X-ray inspection of light weight materials

International Nuclear Information System (INIS)

Ewert, Uwe; Redmer, Bernhard; Raedel, Christoph; Osterloh, Kurt; Schnars, Ulf; Henrich, Rudolf; Schimmelmann, Olaf; Bavendiek, Klaus; Jahn, Mirko

2008-01-01

Digital detectors such as phosphor imaging plates (IP) and digital detector arrays (DDA) allow radiographic inspection with higher efficiency and improved image quality in comparison to the classic film technique. Mobile X-ray flash tubes are used routinely for veterinarian and security applications. New high sensitive IPs and DDAs enable to apply them for inspection of light materials with low X-ray attenuation as in aluminium, plastics and composites. A versatile computed tomography (CT) system was developed for in situ inspection of large aircraft components under production conditions. A gate based planar computed tomograph was developed and tested for inspection of integrity of the stringer incorporation. Successful test trials were performed to prove the detection rate of cracks in embedded stringers. Honey comb structures of aircrafts have to be inspected for water inclusions during in-service inspections. Thermography is a powerful method for in house inspections when variations in temperature caused e.g. by sunshine can be excluded. A new X-ray diaphragm was developed for mobile back scatter measurements of large components. This method is insensitive to heat alterations in the field and thus can be applied also outdoors. (orig.)

Specific leaf mass, fresh: dry weight ratio, sugar and protein contents in species of Lamiaceae from different light environments

Directory of Open Access Journals (Sweden)

M Castrillo

2005-06-01

Full Text Available Samples from eleven species of Lamiaceae were collected from different light environments in Venezuela for laboratory analysis.The studied species were: Plectranthus scutellarioides (Ps, Scutellaria purpurascens (Sp, Hyptis pectinata (Hp, H. sinuata (Hs, Leonorus japonicus (Lj, Plecthranthus amboinicus (Pa Ocimum basilicum (Ocb, O.campechianum (Occ Origanum majorana (Orm, Rosmarinus officinali ,(Ro and Salvia officinalis (So. Protein and soluble sugar contents per unit of area were measured, Specific Leaf Mass (SLMand fresh: dry weight (FW/DW ratios were calculated. The higher values for soluble sugars contents were present in sun species: Lj, Pa, Ocb, Occ, Or. m, Ro and So; the lower values were obtained in low light species: Ps, Sp, Hp, Hs. The values of protein content do not show any clear trend or difference between sun and shade environments. The lowest values for the fresh weight: dry weight ratio are observed in sun species with the exception of Lj and Pa, while the highest value is observed in Pa, a succulent plant. The higher values of specific leaf mass (SLM(Kg DMm-2 are observed in sun plants. The two way ANOVA revealed that there were significant differences among species and between sun and low light environments for sugar content and FW: DW ratio, while SLM was significant for environments but no significant for species, and not significant for protein for both species and environments. The soluble sugar content, FW: DW ratio and SLM values obtained in this work, show a clear separation between sun and shade plants. The sugar content and FW:DW ratio are distinctive within the species,and the light environment affected sugar content, FW:DW ratio and SLM. These species may be shade-tolerant and able to survive in sunny environments. Perhaps these species originated in shaded environments and have been adapting to sunny habitats.Rev.Biol.Trop.53(1-2:23-28.Epub 2005 Jun 24En once especies de la familia Lamiaceae: Plecthranthus

The Impact of Environmental Light Intensity on Experimental Tumor Growth.

Science.gov (United States)

Suckow, Mark A; Wolter, William R; Duffield, Giles E

2017-09-01

Cancer research requires for consistent models that minimize environmental variables. Within the typical laboratory animal housing facility, animals may be exposed to varying intensities of light as a result of cage type, cage position, light source, and other factors; however, studies evaluating the differential effect of light intensity during the light phase on tumor growth are lacking. The effect of cage face light intensity, as determined by cage rack position was evaluated with two tumor models using the C57Bl/6NHsd mouse and transplantable B16F10 melanoma cells or Lewis lung carcinoma (LLC) cells. Animals were housed in individually-ventilated cages placed at the top, middle, or bottom of the rack in a diagonal pattern so that the top cage was closest to the ceiling light source, and cage face light intensity was measured. Following a two-week acclimation period at the assigned cage position, animals were subcutaneously administered either 1.3×10 6 B16F10 melanoma cells or 2.5×10 5 Lewis lung carcinoma cells. Weights of excised tumors were measured following euthanasia 18 days (melanoma) or 21 days (LCC) after tumor cell administration. Cage face light intensity was significantly different depending on the location of the cage, with cages closest to the light source have the greatest intensity. Mean tumor weights were significantly less (plight intensity mice compared to high and low light intensity mice. The environmental light intensity to which experimental animals are exposed may vary markedly with cage location and can significantly influence experimental tumor growth, thus supporting the idea that light intensity should be controlled as an experimental variable for animals used in cancer research. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Energy efficient solid state lighting

Energy Technology Data Exchange (ETDEWEB)

Dam-Hansen, C.; Petersen, Poul Michael

2012-11-15

Even though vast improvements have been made on efficiency and light quality, SSL is still in its infancy. One of the barriers for a market introduction is the price, which still is around 5 times higher than traditional lighting technologies. In order to fulfil the potential of SSL, further research and development needs to increase the light extraction from semiconductor materials, provide better and cheaper production and packaging, and advanced optical systems for optimized light distribution and new thermal solutions for SSL lamps and luminaires. Nanotechnology and applied research at DTU Fotonik in close collaboration with industry are essential parts in the development of new enhanced LED optical systems and LEDs with higher light extraction efficiency. Photonic crystals can help to efficiently extract light from LEDs and to form a desired emission profile. Future directions are devoted to the next generation of LEDs, in which the spontaneous emission is photon enhanced. One realization of this idea is using LEDs with a layer of nanocrystals, which are coupled to the quantum well of the LED. Such R and D work is ongoing all over the world and DOE roadmaps foresee luminous efficiencies by 2020 that are close to 250 lm/W for both cold and warm white light from LEDs, and prices in the order of one dollar per kilolumen. Such figures will drastically reduce the energy consumption worldwide for lighting, and hence a marked reduction in carbon emissions. (Author)

Theoretical interpretations of enhanced laser light absorption

International Nuclear Information System (INIS)

Kruer, W.L.

1975-01-01

Intense laser light is not efficiently absorbed classically but can be absorbed by its conversion to electron plasma waves near the critical density. The physical mechanisms for this conversion are discussed, and some simple estimates for heating by plasma waves are applied to some recent experiments. Several effects which strongly influence the absorption of high intensity light are emphasized, including a nonlinear steepening of the plasma density profile which is demonstrated in computer simulations. Finally the possibility of an induced reflection of laser light due to instabilities in the underdense plasma before the critical density is also discussed. Such stimulated reflection can be particularly important in plasmas with very long density gradients. (U.S.)

Blood profiling of proteins and steroids during weight maintenance with manipulation of dietary protein level and glycaemic index

DEFF Research Database (Denmark)

Wang, Ping; Holst, Claus; Astrup, Arne

2012-01-01

) blood biomarkers of dietary protein and GI levels during the weight-maintenance phase. Blood samples were collected at baseline, after 8 weeks of low-energy diet-induced weight loss and after a 6-month dietary intervention period from female continued weight losers (n 48) and weight regainers (n 48......), evenly selected from four dietary groups that varied in protein and GI levels. The blood concentrations of twenty-nine proteins and three steroid hormones were measured. The changes in analytes during weight maintenance largely correlated negatively with the changes during weight loss, with some...

Residential and Light Commercial HVAC. Teacher Edition.

Science.gov (United States)

Stephenson, David; Fulkerson, Dan, Ed.

This curriculum guide contains 18 units of instruction for a competency-based course in residential and light commercial heating, ventilating, and air conditioning (HVAC). Introductory materials include a competency profile and an instructional/task analysis that correlates job training with related information for this course. Each instructional…

Performance, carcass traits, meat quality and amino acid profile of different Japanese quails strains.

Science.gov (United States)

Nasr, Mohammed A F; Ali, El-Shimaa M R; Hussein, Mohamed A

2017-12-01

Poultry production is considered one of the prospective opportunities to accomplish sustainable and quick production of superior protein to challenge the growing mandate for animal protein. Therefore, this study was aimed to explore the difference on growth performance, carcass traits, meat quality and amino acid profile of different Japanese quails strains. A total of 480 quail chicks of four different plumage colors (120 of each white, golden, gray and brown) were collected after hatching. At 6 week of age, birds were stunned and decapitated to determine the physical meat quality, thiobarbituric acid reactive substances and amino acid profile. White quails had the highest weight of slaughter, carcass, dressing, carcass yield, liver, gizzard, heart and spleen (197.27 g, 169.27 g, 91%, 82%, 6.63 g, 6.53 g, 2.27 g and 0.40 g, respectively). Also, they had the highest Ph U , lightness, yellowness and water holding capacity with the lowest level of redness, cooking losses and thiobarbituric acid in pectoral (6.28, 46.40, 12,46, 22.17, 9.20, 19.21 and 0.44, respectively) and thigh muscles (6.37, 42.30, 11.51, 26.01, 10.12 and 0.93, respectively). Moreover, they possessed the highest level of all essential (11.68 and 10.16 g/100 g protein in pectoral and thigh muscles, respectively) and non essential amino acids (13.27 and 12.54 g/100 g protein in pectoral and thigh muscles, respectively). Therefore, the current study revealed that white quails had the heaviest body weight with the best carcass traits and meat quality.

Profile Monitors Based on Residual Gas Interaction

CERN Document Server

Forck, P; Giacomini, T; Peters, A

2005-01-01

The precise determination of transverse beam profiles at high current hadron accelerators has to be performed non-interceptingly. Two methods will be discussed based on the excitation of the residual gas molecules by the beam particles: Firstly, by beam induced fluorescence (BIF) light is emitted from the residual gas molecules and is observed with an image intensified CCD camera. At most laboratories N2 gas is inserted, which has a large cross section for emission in the blue wave length region. Secondly, a larger signal strength is achieved by detecting the ionization products in an Ionization Profile Monitor (IPM). By applying an electric field all ionization products are accelerated toward a spatial resolving Micro-Channel Plate. The signal read-out can either be performed by observing the light from a phosphor screen behind the MCP or electronically by a wire array. Methods to achieve a high spatial resolution and a fast turn-by-turn readout capability are discussed. Even though various approaches at dif...

effect of continous light and darkness exposures on the pituitary

African Journals Online (AJOL)

Dr Olaleye

The effects of constant light and dark exposure of pubertal male rats on the pituitary-gonadal axis and thyroid activity were studied. ... In the rats exposed to continuous light, the weight of the thyroid gland increased significantly (P<0.02) and the serum level of T4 also ... 3minutes) per day when food in the cages was being.

Vacuum Deposited Organic Light Emitting Devices on Flexible Substrates

National Research Council Canada - National Science Library

Forrest, Stephen

2002-01-01

The objective of this eight year program was to demonstrate both passive and active matrix, flexible, small scale displays based on small molecular weight organic light emitting device (OLED) technology...

Stability of cocaine impurity profiles during 12 months of storage

DEFF Research Database (Denmark)

Nielsen, Louise Stride; Villesen, Palle; Lindholst, Christian

2016-01-01

During the lifetime of a cocaine batch from production end to consumption, several alterations may occur, leading to possible changes in the original impurity profile. Such profile changes may eventually result in erroneous forensic evaluations. In the present study, the stability of both...... the alkaloid and the residual solvent impurity profiles of cocaine were evaluated over a period of 12 months under different storage conditions (temperature, purity and weight) using GC-MS and HS-GC-MS, respectively. The sample purity (p ... profile. The most significant change was observed in low purity samples stored at 37 °C. In contrast, no changes were observed in the residual solvent profile at all storage conditions for the entire 12-month study period. This finding indicates...

Behavioral therapy for weight loss in patients with schizophrenia.

Science.gov (United States)

Ganguli, Rohan

2007-01-01

Compared with the general population, individuals with schizophrenia demonstrate an increased prevalence of obesity. While most antipsychotics are associated with weight gain, certain second-generation antipsychotics (SGAs) appear to be especially problematic. Weight gain and obesity are highly distressing to these patients, can reduce treatment adherence, and may increase the relative risk of serious medical conditions and all-cause premature mortality. The selection of an antipsychotic on the basis of its effectiveness and relative side effect profile is recognized as an important initial consideration in the treatment of schizophrenia. However, less is known regarding the efficacy of dietary, pharmacologic, and behavioral therapy in reducing antipsychotic-related weight gain and obesity. Behavioral therapy, in particular, is understudied, and there are relatively few controlled trials of its effectiveness in reducing SGA-induced weight gain. Although weight loss resulting from behavioral therapy has been observed mostly as a result of effective short-term interventions, controlled behavioral studies do exist to suggest that weight can be controlled long term. In addition, a small pilot study in patients with schizophrenia or schizoaffective disorder recently demonstrated that behavioral therapy that utilizes stepped interventions, involving body weight self-monitoring, diet, and exercise, can prevent weight gain in patients initiating treatment with SGAs. Additional studies of behavioral therapy for long-term weight control in patients with schizophrenia and other forms of severe mental illness are warranted.

Light-Weight, Flexible, High Efficiency Vacuum Photo-Thermo-Voltaic Solar Cells, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Conventional solar cells are limited in efficiency, require heavy weight for high power applications, and tend to degrade rapidly in the harsh radiation environment...

Effects of Using Light-Weight Concrete on Indoor Radon Concentration in High-Rise Buildings

Energy Technology Data Exchange (ETDEWEB)

Yu, K.N.; Cheung, T.; Koo, S.Y

1999-07-01

Light-weight concrete (LWC) (or drywall construction) has been used for partition walls in public housing in Hong Kong for about 10 years. A previous laboratory investigation showed that all types of LWC had considerably smaller Rn exhalation rates than those from normal concrete (NC), and could thus theoretically reduce the indoor Rn concentrations and the corresponding radiation dose from Rn. In the present investigation, a survey of Rn exhalation rates and indoor Rn concentrations at 39 dwelling sites built using LWC were carried out using charcoal canisters and {gamma}-spectroscopy. The mean Rn exhalation rate and the mean Rn concentration were around 1.6 mBq.s{sup -1}.m{sup -2} and 19 Bq.m{sup -3}, respectively, which were significantly smaller thanthe corresponding values of 12 mBq.s{sup -1}.m{sup -2} and 33 Bq.m{sup -3} for NC sites. The statistical t-test showed that both the mean Rn exhalation rate and the mean Rn concentration for NC and LWC sites walls were different at the 100% confidence level. The Rn exhalation rate from an LWC surface was, on average, only about 14% of that from an NC surface, while the Rn concentration in an LWC site was, on average, about 58% of that in an NC site, which were significant. A person living at an LWC site receives an average annual equivalent dose smaller than one living at an NC site by an amount as large as 1 mSv. Therefore, the use of LWC for partition walls can be a simple and economical way to reduce the indoor Rn concentrations and the corresponding radiation dose from Rn. Furthermore, the mean Rn concentration theoretically predicted from the mean Rn exhalation rate agreed excellently with that from measurements. (author)

Metformin and weight loss in obese women with polycystic ovary syndrome: comparison of doses.

Science.gov (United States)

Harborne, Lyndal R; Sattar, Naveed; Norman, Jane E; Fleming, Richard

2005-08-01

Metformin treatment of women with polycystic ovary syndrome (PCOS) is widespread, as determined by studies with diverse patient populations. No comparative examination of weight changes or metabolite responses to different doses has been reported. The aim of this study was to determine whether different doses of metformin (1500 or 2550 mg/d) would have different effects on body weight, circulating hormones, markers of inflammation, and lipid profiles. The study included prospective cohorts randomized to two doses of metformin. The study was performed at a university teaching hospital with patients from gynecology/endocrinology clinics. The patients studied were obese (body mass index, 30 to or =37 kg/m2; n = 41) women with PCOS. Patients were randomized to two doses of metformin, and parameters were assessed after 4 and 8 months. The main outcome measures were changes in body mass, circulating hormones, markers of inflammation, and lipid profiles. Intention to treat analyses showed significant weight loss in both dose groups. Only the obese subgroup showed a dose relationship (1.5 and 3.6 kg in 1500- and 2550-mg groups, respectively; P = 0.04). The morbidly obese group showed similar reductions (3.9 and 3.8 kg) in both groups. Suppression of androstenedione was significant with both metformin doses, but there was no clear dose relationship. Generally, beneficial changes in lipid profiles were not related to dose. Weight loss is a feature of protracted metformin therapy in obese women with PCOS, with greater weight reduction potentially achievable with higher doses. Additional studies are required to determine whether other aspects of the disorder may benefit from the higher dose of metformin.

Exercise attenuates the metabolic effects of dim light at night.

Science.gov (United States)

Fonken, Laura K; Meléndez-Fernández, O Hecmarie; Weil, Zachary M; Nelson, Randy J

2014-01-30

Most organisms display circadian rhythms that coordinate complex physiological and behavioral processes to optimize energy acquisition, storage, and expenditure. Disruptions to the circadian system with environmental manipulations such as nighttime light exposure alter metabolic energy homeostasis. Exercise is known to strengthen circadian rhythms and to prevent weight gain. Therefore, we hypothesized providing mice a running wheel for voluntary exercise would buffer against the effects of light at night (LAN) on weight gain. Mice were maintained in either dark (LD) or dim (dLAN) nights and provided either a running wheel or a locked wheel. Mice exposed to dim, rather than dark, nights increased weight gain. Access to a functional running wheel prevented body mass gain in mice exposed to dLAN. Voluntary exercise appeared to limit weight gain independently of rescuing changes to the circadian system caused by dLAN; increases in daytime food intake induced by dLAN were not diminished by increased voluntary exercise. Furthermore, although all of the LD mice displayed a 24h rhythm in wheel running, nearly half (4 out of 9) of the dLAN mice did not display a dominant 24h rhythm in wheel running. These results indicate that voluntary exercise can prevent weight gain induced by dLAN without rescuing circadian rhythm disruptions. © 2013.

Effects of a low-carbohydrate diet on weight loss and cardiovascular risk factor in overweight adolescents.

Science.gov (United States)

Sondike, Stephen B; Copperman, Nancy; Jacobson, Marc S

2003-03-01

To compare the effects of a low-carbohydrate (LC) diet with those of a low-fat (LF) diet on weight loss and serum lipids in overweight adolescents. A randomized, controlled 12-week trial. Atherosclerosis prevention referral center. Random, nonblinded assignment of participants referred for weight management. The study group (LC) (n = 16) was instructed to consume vs 4.1 +/- 4.9 kg, P <.05) and had improvement in non-HDL cholesterol levels (P <.05). There was improvement in LDL cholesterol levels (P <.05) in the LF group but not in the LC group. There were no adverse effects on the lipid profiles of participants in either group. The LC diet appears to be an effective method for short-term weight loss in overweight adolescents and does not harm the lipid profile.

Amino Acid Profile, Group of Functional and Molecular Weight Distribution of Goat Skin Gelatin That Produced Through Acid Process

Directory of Open Access Journals (Sweden)

Muhammad Irfan Said

2012-02-01

Full Text Available Gelatin is a product of hydrolysis of collagen protein from animals that are partially processed.  Gelatin used in food and non food industries.  Gelatin is produced when many import of raw skins and bones of pigs and cows.  Goat skins potential as a raw material substitution that still doubt its halal. Process production of gelatin determine the properties of gelatin. The objectives of this research were to determine amino acid profile, group of functional and molecular weight distribution of gelatin made from goat skins which was produced through a process of acid. The skin of male Bligon goat, 1.5 to 2.5 year old was used as raw materials. Process production of gelatin was using acid type acetic acid (CH3COOH 0.5 M (v/v as curing material. The experimental design applied in this study and commercial gelatin was used as control. The results showed that gelatin produced from goat skin through the process of acid had properties identical with commercial gelatin. It can be concluded that the gelatin has the potential substitute product of commercial gelatin. Keywords: collagen, gelatin, goat skin, curing, acid process

Analysis of amino acids and acyl carnitine profiles in low birth weight, preterm, and small for gestational age neonates.

Science.gov (United States)

Liu, Qian; Wu, Jing; Shen, Wen; Wei, Ran; Jiang, Jianhui; Liang, Jinqun; Chen, Min; Zhong, Mei; Yin, Aihua

2017-11-01

To analyze the amino acids (AA) and acyl carnitine (AC) profiles in dry blood spot (DBS) specimens of low birth weight (LBW), preterm birth (PTB), and small for gestational age (SGA), and to compare the concentration difference of AA and AC with those without above. This is a retrospectively study. Eight thousand nine hundred and seventy-nine uncomplicated pregnant newborns were enrolled into the study. DBS were collected on the third day of life, and concentrations of 11 types of AA, free carnitine and 30 types of AC were detected by using high-performance liquid chromatography tandem mass spectrometry (HPLC-MS). Shapiro-Wilk test and Kruskal-Wallis rank test were applied in statistical analysis. Concentrations of most AA and AC in infants born in SGA were significantly higher than those in non-SGA group, while lower in LBW and PTB groups than those in non-LBW and non-PTB groups (p < 0.05). The difference of concentration of AA and AC in the subgroups suggested there may be a dysutilization of AA and AC in SGA, but an inborn insufficient of AA and AC in LBW and PTB neonates.

Phase shifting white light interferometry using colour CCD for optical metrology and bio-imaging applications

Science.gov (United States)

Upputuri, Paul Kumar; Pramanik, Manojit

2018-02-01

Phase shifting white light interferometry (PSWLI) has been widely used for optical metrology applications because of their precision, reliability, and versatility. White light interferometry using monochrome CCD makes the measurement process slow for metrology applications. WLI integrated with Red-Green-Blue (RGB) CCD camera is finding imaging applications in the fields optical metrology and bio-imaging. Wavelength dependent refractive index profiles of biological samples were computed from colour white light interferograms. In recent years, whole-filed refractive index profiles of red blood cells (RBCs), onion skin, fish cornea, etc. were measured from RGB interferograms. In this paper, we discuss the bio-imaging applications of colour CCD based white light interferometry. The approach makes the measurement faster, easier, cost-effective, and even dynamic by using single fringe analysis methods, for industrial applications.

Relationship between weight of rescuer and quality of chest compression during cardiopulmonary resuscitation.

Science.gov (United States)

Hasegawa, Tomoyuki; Daikoku, Rie; Saito, Shin; Saito, Yayoi

2014-06-24

According to the guidelines for cardiopulmonary resuscitation (CPR), the rotation time for chest compression should be about 2 min. The quality of chest compressions is related to the physical fitness of the rescuer, but this was not considered when determining rotation time. The present study aimed to clarify associations between body weight and the quality of chest compression and physical fatigue during CPR performed by 18 registered nurses (10 male and 8 female) assigned to light and heavy groups according to the average weight for each sex in Japan. Five-minute chest compressions were then performed on a manikin that was placed on the floor. Measurement parameters were compression depth, heart rate, oxygen uptake, integrated electromyography signals, and rating of perceived exertion. Compression depth was evaluated according to the ratio (%) of adequate compressions (at least 5 cm deep). The ratio of adequate compressions decreased significantly over time in the light group. Values for heart rate, oxygen uptake, muscle activity defined as integrated electromyography signals, and rating of perceived exertion were significantly higher for the light group than for the heavy group. Chest compression caused increased fatigue among the light group, which consequently resulted in a gradual fall in the quality of chest compression. These results suggested that individuals with a lower body weight should rotate at 1-min intervals to maintain high quality CPR and thus improve the survival rates and neurological outcomes of victims of cardiac arrest.

Curtain color and lighting program in broiler production: I - general performance

Directory of Open Access Journals (Sweden)

Valéria Maria Nascimento Abreu

2011-09-01

Full Text Available The objective of the present study was to evaluate mortality and performance, darkling beetle population (Alphitobius diaperinus, light intensity, electrical energy consumption and economic efficiency of broilers reared under two lighting programs (nearly continuous or intermittent and two curtain colors (yellow or blue. The experiment was conducted between June, 2004 and May, 2005. Six flocks were sequentially housed in four 12 × 10 m broiler houses divided into 4 pens with 200 birds each. Litter was reused six times or until flock 6. Body weight and feed conversion were determined on days 21, 35, and 42 of each flock. Mortality was recorded daily. Electrical energy consumption was recorded at the end of the grow-out of each flock (every 42 days. A completely randomized design in a 6 × 2 × 2 factorial arrangement (flocks, lighting programs, curtains with four replicates per treatment was applied. Broilers reared in houses with yellow curtains and under nearly continuous lighting programs presented the best feed conversion ratio and the highest body weight. Nearly continuous lighting programs resulted in 1.48 times more sudden deaths and 1.34 times higher general mortality when compared with intermittent lighting programs. Electrical energy consumption was 2.12 times higher in nearly continuous lighting programs in relation to intermittent lighting programs. The presence of darkling beetles was higher in broiler houses with blue curtains and intermittent lighting program. The economic analysis showed the feasibility of using a mixed system, with intermittent light program in winter and spring and nearly continuous lighting program in the summer and autumn, both in broiler houses with yellow curtains.

A low molecular weight urinary proteome profile of human kidney aging

OpenAIRE

Zürbig, Petra; Decramer, Stéphane; Dakna, Mohammed; Jantos, Justyna; Good, David M.; Coon, Joshua J.; Bandin, Flavio; Mischak, Harald; Bascands, Jean-Loup; Schanstra, Joost P

2009-01-01

Aging induces morphological changes of the kidney and reduces renal function. We analyzed the low molecular weight urinary proteome of 324 healthy individuals from 2-73 years of age to gain insight on renal aging in humans. We observed age-related modification of secretion of 325 out of 5000 urinary peptides. The majority of these changes was associated with renal development before and during puberty, while 49 peptides were related to aging in adults. Of these 49 peptides, the majority were ...

Optimization of freeform lightpipes for light-emitting-diode projectors.

Science.gov (United States)

Fournier, Florian; Rolland, Jannick

2008-03-01

Standard nonimaging components used to collect and integrate light in light-emitting-diode-based projector light engines such as tapered rods and compound parabolic concentrators are compared to optimized freeform shapes in terms of transmission efficiency and spatial uniformity. We show that the simultaneous optimization of the output surface and the profile shape yields transmission efficiency within the étendue limit up to 90% and spatial uniformity higher than 95%, even for compact sizes. The optimization process involves a manual study of the trends for different shapes and the use of an optimization algorithm to further improve the performance of the freeform lightpipe.

Profiling Occupant Behaviour in Danish Dwellings using Time Use Survey Data - Part I: Data Description and Activity Profiling

DEFF Research Database (Denmark)

Barthelmes, V.M.; Li, R.; Andersen, R.K.

2018-01-01

Occupant behaviour has been shown to be one of the key driving factors of uncertainty in prediction of energy consumption in buildings. Building occupants affect building energy use directly and indirectly by interacting with building energy systems such as adjusting temperature set...... occupant profiles for prediction of energy use to reduce the gap between predicted and real building energy consumptions. To generate accurate occupant profiles for the residential sector in Denmark, the Danish time use surveys are considered an essential data source. The latest Danish diarybased time use......-points, switching lights on/off, using electrical devices and opening/closing windows. Furthermore, building inhabitants’ daily activity profiles clearly shape the timing of energy demand in households. Modelling energy-related human activities throughout the day, therefore, is crucial to defining more realistic...

Determination of Viscosity-Average Molecular Weight of Chitosan using Intrinsic Viscosity Measurement

International Nuclear Information System (INIS)

Norzita Yacob; Norhashidah Talip; Maznah Mahmud

2011-01-01

Molecular weight of chitosan can be determined by different techniques such as Gel Permeation Chromatography (GPC), Static Light Scattering (SLS) and intrinsic viscosity measurement. Determination of molecular weight by intrinsic viscosity measurement is a simple method for characterization of chitosan. Different concentrations of chitosan were prepared and measurement was done at room temperature. The flow time data was used to calculate the intrinsic viscosity by extrapolating the reduced viscosity to zero concentration. The value of intrinsic viscosity was then recalculated into the viscosity-average molecular weight using Mark-Houwink equation. (author)

[Intractable diarrhoea and severe weight loss by roflumilast].

Science.gov (United States)

Horna, Oihana; Toyas, Carla

2013-08-04

Roflumilast is a recently marketed drug, indicated for maintenance treatment of severe chronic obstructive pulmonary disease associated with chronic bronchitis in adult patients with a history of frequent exacerbations as add on to bronchodilator treatment. The safety data of this drug have always been subjected to controversy and concerns. The Food and Drug Administration rejected the drug after the first evaluation, asking the company to clarify the adverse reactions during the investigation process, the European Medicines Agency approved the drug including a Risk Management Plan, designed to promote a safe use of the drug. During the first months after the marketing process, the Spanish Pharmacovigilance System has already been acquainted of several adverse events notifications; therefore, these patients may be closely monitored, mainly because of digestive and psychiatric disorders. Here we report the case of a female patient who showed a serious digestive clinical profile and a severe weight loss, more than 25% of her initial weight, when a treatment with roflumilast was started. The suspicion of a side effect as the cause of the reported clinical profile and its resolution required 3 hospital admissions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Effect of high-protein meal replacement on weight and cardiometabolic profile in overweight/obese Asian Indians in North India.

Science.gov (United States)

Gulati, Seema; Misra, Anoop; Tiwari, Rajneesh; Sharma, Meenu; Pandey, Ravindra M; Yadav, Chander Prakash

2017-06-01

The aim of the present study was to evaluate the impact of a high-protein meal replacement (HPMR) on weight and metabolic, lipid and inflammatory parameters in overweight/obese Asian Indians. In this 12-week open-label, parallel-arm randomised controlled trial, 122 overweight/obese men and women were administered either a HPMR or a control diet after 2 weeks of diet and exercise run-in. Body weight, waist circumference (WC), percentage body fat (%BF), fasting blood glucose, post-oral glucose tolerance test (post-OGTT) blood glucose, fasting and post-OGTT serum insulin, lipid profile, high-sensitivity C-reactive protein (hs-CRP), kidney function and hepatic aminotransferases were assessed before and after the intervention. Additional improvement in mean values for the following parameters in the HPMR group compared with the control group was observed: body weight, 4·9 % (95 % CI 3·8, 6·1; P<0·001); WC, 3·8 % (95 % CI 2·5, 5·1; P<0·001); %BF, 6·3 % (95 % CI 4·3, 8·2; P<0·001); systolic blood pressure, 2·8 % (95 % CI 0·4, 5·1; P=0·002); diastolic blood pressure, 3·5 % (95 % CI 0·7, 6·3; P= 0·01); post-OGTT blood glucose, 7·3 % (95 % CI 1·4, 13·1; P=0·02); total cholesterol, 2·5 % (95 % CI 1·6, 3·5; P<0·001); LDL-cholesterol, 7·3 % (95 % CI 1·7, 12·9; P<0·01); alanine aminotransferase, 22·0 % (95 % CI 2·1, 42; P=0·03) and aspartate aminotransferase, 15·2 % (95 % CI 0·9, 29·5; P=0·04). The absolute reduction in BMI was 0·9 units in the intervention arm compared with the control arm (-0·9 %, 95 % CI -1·4, -0·5; P<0·001) and in serum TAG was 11·9 mg/dl (-11·9 mg/dl, 95 % CI -21·1, -2·7; P<0·01). The reduction in fasting serum insulin in the intervention v. the control arm was 3·8 v. 0 % (P=0·002); post-OGTT serum insulin was 50·3 v. 77·3 mU/l (P=0·005); and hs-CRP, 16·7 % v. 0 % (P=0·002). These findings show that intervention with HPMR may lead to significant weight loss and improvement in obesity measures

Light Sources and Lighting Circuits

Science.gov (United States)

Honda, Hisashi; Suwa, Takumi; Yasuda, Takeo; Ohtani, Yoshihiko; Maehara, Akiyoshi; Okada, Atsunori; Komatsu, Naoki; Mannami, Tomoaki

means of using filler gas with a higher atomic weight. Regarding fluorescent lamps, studies and developments for longer operating life and improvement in the lumen maintenance factor for the straight-type and circular-type fluorescent lamps were actively pursued. Regarding self-ballasted fluorescent lamps, the main stream of development was aimed at reducing lamp size and increasing energy conservation, and the development of new products that took advantage of these features proceeded. In regard to LED light sources, basic research and product development, including new application development, were vigorously implemented. In basic research, studies were reported, not only on efficacy improvements through optimization of the LED chips, phosphor layers, and packaging technology, but also on photometry, colorimetry, and visual psychology. In the field of application, applications were studied for general lighting sources and also for a wide range of fields, such as automotive headlights and visible light communication. Also, many academic conferences and exhibitions were held domestically and overseas, and the high level of interest suggests high expectations for this next-generation light source. Regarding HID lamps, there was much activity in research and development and in the commercialization of the ceramic metal halide lamp product, and products were commercialized with features such as higher efficiency (130 lm/W) and higher color rendering properties (R9 ≥ 90). In the high-pressure sodium lamps, there were many study reports concerning plant growth and insect pest control using its low insect-attracting characteristics. With high-pressure mercury lamps, there were many reports on reducing lamp size and increasing intensity for use as a light source for projectors.

Coherent laser phase retrieval in the presence of measurement imperfections and incoherent light

DEFF Research Database (Denmark)

Hansen, Anders Kragh

2017-01-01

-plane Gerchberg–Saxton algorithm and demonstrate that it is highly successful at extracting the intensity profile and wavefront of the spatially coherent part of the light from various lasers, including tapered laser diodes, at a very high fidelity despite the presence of incoherent light and noise....

Impact of Weight Regain on Metabolic Disease Risk: A Review of Human Trials

Directory of Open Access Journals (Sweden)

Cynthia M. Kroeger

2014-01-01

Full Text Available Dietary restriction interventions are effective for weight loss and reduction of chronic disease risk. Unfortunately, most people tend to regain much of this lost weight within one year after intervention. While some studies suggest that minor degrees of weight regain have no effect on metabolic disease risk parameters, other studies demonstrate a complete reversal in metabolic benefits. In light of these conflicting findings, it is of interest to determine how complete weight maintenance versus mild weight regain affects key risk parameters. These findings would have important clinical implications, as they could help identify a weight regain threshold that could preserve the metabolic benefits of weight loss. Accordingly, this review examined the impact of no weight regain versus mild regain on various metabolic disease risk parameters, including plasma lipids, blood pressure, glucose, and insulin concentrations, in adult subjects.

Crop yield and light/energy efficiency in a closed ecological system: Laboratory Biosphere experiments with wheat and sweet potato.

Science.gov (United States)

Nelson, M; Dempster, W F; Silverstone, S; Alling, A; Allen, J P; van Thillo, M

2005-01-01

Two crop growth experiments in the soil-based closed ecological facility, Laboratory Biosphere, were conducted from 2003 to 2004 with candidate space life support crops. Apogee wheat (Utah State University variety) was grown, planted at two densities, 400 and 800 seeds m-2. The lighting regime for the wheat crop was 16 h of light-8 h dark at a total light intensity of around 840 micromoles m-2 s-1 and 48.4 mol m-2 d-1 over 84 days. Average biomass was 1395 g m-2, 16.0 g m-2 d-1 and average seed production was 689 g m-2 and 7.9 g m-2 d-1. The less densely planted side was more productive than the denser planting, with 1634 g m-2 and 18.8 g m-2 d-1 of biomass vs. 1156 g m-2 and 13.3 g m-2 d-1; and a seed harvest of 812.3 g m-2 and 9.3 g m-2 d-1 vs. 566.5 g m-2 and 6.5 g m-2 d-1. Harvest index was 0.49 for the wheat crop. The experiment with sweet potato used TU-82-155 a compact variety developed at Tuskegee University. Light during the sweet potato experiment, on a 18 h on/6 h dark cycle, totaled 5568 total moles of light per square meter in 126 days for the sweet potatoes, or an average of 44.2 mol m-2 d-1. Temperature regime was 28 +/- 3 degrees C day/22 +/- 4 degrees C night. Sweet potato tuber yield was 39.7 kg wet weight, or an average of 7.4 kg m-2, and 7.7 kg dry weight of tubers since dry weight was about 18.6% wet weight. Average per day production was 58.7 g m-2 d-1 wet weight and 11.3 g m-2 d-1. For the wheat, average light efficiency was 0.34 g biomass per mole, and 0.17 g seed per mole. The best area of wheat had an efficiency of light utilization of 0.51 g biomass per mole and 0.22 g seed per mole. For the sweet potato crop, light efficiency per tuber wet weight was 1.33 g mol-1 and 0.34 g dry weight of tuber per mole of light. The best area of tuber production had 1.77 g mol-1 wet weight and 0.34 g mol-1 of light dry weight. The Laboratory Biosphere experiment's light efficiency was somewhat higher than the USU field results but somewhat below

Similarity between neonatal profile and socioeconomic index: a spatial approach

Directory of Open Access Journals (Sweden)

d'Orsi Eleonora

2005-01-01

Full Text Available This study aims to compare neonatal characteristics and socioeconomic conditions in Rio de Janeiro city neighborhoods in order to identify priority areas for intervention. The study design was ecological. Two databases were used: the Brazilian Population Census and the Live Birth Information System, aggregated by neighborhoods. Spatial analysis, multivariate cluster classification, and Moran's I statistics for detection of spatial clustering were used. A similarity index was created to compare socioeconomic clusters with the neonatal profile in each neighborhood. The proportions of Apgar score above 8 and cesarean sections showed positive spatial correlation and high similarity with the socioeconomic index. The proportion of low birth weight infants showed a random spatial distribution, indicating that at this scale of analysis, birth weight is not sufficiently sensitive to discriminate subtler differences among population groups. The observed relationship between the neighborhoods' neonatal profile (particularly Apgar score and mode of delivery and socioeconomic conditions shows evidence of a change in infant health profile, where the possibility for intervention shifts to medical services and the Apgar score assumes growing significance as a risk indicator.

Impact of NO2 Profile Shape in OMI Tropospheric NO2 Retrievals

Science.gov (United States)

Lamsal, Lok; Krotkov, Nickolay A.; Pickering, K.; Schwartz, W. H.; Celarier, E. A.; Bucsela, E. J.; Gleason, J. F.; Philip, S.; Nowlan, C.; Martin, R. V.;

Succession of the turkey gastrointestinal bacterial microbiome related to weight gain

Directory of Open Access Journals (Sweden)

Jessica L. Danzeisen

2013-12-01

Full Text Available Because of concerns related to the use of antibiotics in animal agriculture, antibiotic-free alternatives are greatly needed to prevent disease and promote animal growth. One of the current challenges facing commercial turkey production in Minnesota is difficulty obtaining flock average weights typical of the industry standard, and this condition has been coined “Light Turkey Syndrome” or LTS. This condition has been identified in Minnesota turkey flocks for at least five years, and it has been observed that average flock body weights never approach their genetic potential. However, a single causative agent responsible for these weight reductions has not been identified despite numerous efforts to do so. The purpose of this study was to identify the bacterial community composition within the small intestines of heavy and light turkey flocks using 16S rRNA sequencing, and to identify possible correlations between microbiome and average flock weight. This study also sought to define the temporal succession of bacteria occurring in the turkey ileum. Based upon 2.7 million sequences across nine different turkey flocks, dominant operational taxonomic units (OTUs were identified and compared between the flocks studied. OTUs that were associated with heavier weight flocks included those with similarity to Candidatus division Arthromitus and Clostridium bartlettii, while these flocks had decreased counts of several Lactobacillus species compared to lighter weight flocks. The core bacterial microbiome succession in commercial turkeys was also defined. Several defining markers of microbiome succession were identified, including the presence or abundance of Candidatus division Arthromitus, Lactobacillus aviarius, Lactobacillus ingluviei, Lactobacillus salivarius, and Clostridium bartlettii. Overall, the succession of the ileum bacterial microbiome in commercial turkeys proceeds in a predictable manner. Efforts to prevent disease and promote growth in

Oral carnitine supplementation reduces body weight and insulin resistance in women with polycystic ovary syndrome: a randomized, double-blind, placebo-controlled trial.

Science.gov (United States)

Samimi, Mansooreh; Jamilian, Mehri; Ebrahimi, Faraneh Afshar; Rahimi, Maryam; Tajbakhsh, Banafsheh; Asemi, Zatollah

2016-06-01

Limited data are available for evaluating the effects of oral carnitine supplementation on weight loss and metabolic profiles of women with polycystic ovary syndrome (PCOS). This study was designed to determine the effects of oral carnitine supplementation on weight loss, and glycaemic and lipid profiles in women with PCOS. In a prospective, randomized, double-blind, placebo-controlled trial, 60 overweight patients diagnosed with PCOS were randomized to receive either 250 mg carnitine supplements (n = 30) or placebo (n = 30) for 12 weeks. Fasting blood samples were obtained at the beginning and the end of the study to quantify parameters of glucose homoeostasis and lipid concentrations. At the end of the 12 weeks, taking carnitine supplements resulted in a significant reduction in weight (-2·7 ± 1·5 vs +0·1 ± 1·8 kg, P weight, BMI, WC and HC, and beneficial effects on glycaemic control; however, it did not affect lipid profiles or free testosterone. © 2015 John Wiley & Sons Ltd.

The differential plasma proteome of obese and overweight individuals undergoing a nutritional weight loss and maintenance intervention

DEFF Research Database (Denmark)

Oller Moreno, Sergio; Cominetti, Ornella; Núñez Galindo, Antonio

2018-01-01

PURPOSE: The nutritional intervention program "DiOGenes" focuses on how obesity can be prevented and treated from a dietary perspective. We generated differential plasma proteome profiles in the DiOGenes cohort to identify proteins associated with weight loss and maintenance and explore their rel......PURPOSE: The nutritional intervention program "DiOGenes" focuses on how obesity can be prevented and treated from a dietary perspective. We generated differential plasma proteome profiles in the DiOGenes cohort to identify proteins associated with weight loss and maintenance and explore...... with largest changes were sex hormone-binding globulin, adiponectin, C-reactive protein, calprotectin, serum amyloid A, and proteoglycan 4 (PRG4), whose association with obesity and weight loss is known. We identified new putative biomarkers for weight loss/maintenance. Correlation between PRG4 and proline......-rich acidic protein 1 (PRAP1) variation and Matsuda insulin sensitivity increment was showed. CONCLUSIONS AND CLINICAL RELEVANCE: MS-based proteomic analysis of a large cohort of non-diabetic overweight and obese individuals concomitantly identified known and novel proteins associated with weight loss...

Effects of Agave tequilana fructans with different degree of polymerization profiles on the body weight, blood lipids and count of fecal Lactobacilli/Bifidobacteria in obese mice.

Science.gov (United States)

Márquez-Aguirre, Ana Laura; Camacho-Ruiz, Rosa Maria; Arriaga-Alba, Myriam; Padilla-Camberos, Eduardo; Kirchmayr, Manuel Reinhart; Blasco, José Luis; González-Avila, Marisela

2013-08-01

Fructans are dietary fibers with beneficial effects on the gastrointestinal physiology and offer a promising approach for the treatment of some metabolic disorders associated with obesity. In vitro and in vivo studies were developed to test the safety of fructans obtained from Agave tequilana Weber var. azul. Additionally, an in vivo experiment using a diet-induced obesity model was performed to compare the effect of agave fructans with different degree of polymerization (DP) profiles: agave fructans with DP > 10 (LcF), agave FOS with DP agave fructans with and without demineralization (dTF, TF) versus commercial chicory fructans (OraftiSynergy1™) on the body weight change, fat, total cholesterol, triglycerides and count of fecal Lactobacillus spp. and Bifidobacterium spp. Results showed that A. tequilana fructans were not mutagenic and were safe even at a dose of 5 g per kg b.w. Obese mice that received ScF showed a significant decrease in body weight gain, fat tissue and total cholesterol without increasing the count of fecal Bifidobacteria. Whereas, obese mice that received LcF and TF showed decreased triglycerides and an increased count of fecal Bifidobacteria. Interestingly, although obese mice that received dTF did not show changes in body weight gain, fat tissue, total cholesterol or triglycerides, they showed an increase in the count of Bifidobacteria. These results demonstrate that both the degree of polymerization and the demineralization process can influence the biological activity of agave fructans.

Acute effects of various weighted bat warm-up protocols on bat velocity.

Science.gov (United States)

Reyes, G Francis; Dolny, Dennis

2009-10-01

Although research has provided evidence of increased muscular performance following a facilitation set of resistance exercise, this has not been established for use prior to measuring baseball bat velocity. The purpose of this study was to determine the effectiveness of selected weighted bat warm-up protocols to enhance bat velocity in collegiate baseball players. Nineteen collegiate baseball players (age = 20.15 +/- 1.46 years) were tested for upper-body strength by a 3-repetition maximum (RM) bench press (mean = 97.98 +/- 14.54 kg) and mean bat velocity. Nine weighted bat warm-up protocols, utilizing 3 weighted bats (light = 794 g; standard = 850 g; heavy = 1,531 g) were swung in 3 sets of 6 repetitions in different orders. A control trial involved the warm-up protocol utilizing only the standard bat. Pearson product correlation revealed a significant relationship between 3RM strength and pretest bat velocity (r = 0.51, p = 0.01). Repeated measures analysis of variance (ANOVA) revealed no significant treatment effects of warm-up protocol on bat velocity. However, the order of standard, light, heavy bat sequence resulted in the greatest increase in bat velocity (+6.03%). These results suggest that upper-body muscle strength influences bat velocity. It appears that the standard, light, heavy warm-up order may provide the greatest benefit to increase subsequent bat velocity and may warrant use in game situations.

Mammography examination in Ghana: preliminary survey of patients' profiles

International Nuclear Information System (INIS)

Boadu, M.; Sosu, E.K.; Hasford, F.; Nani, E.K.; Addison, E.K.; Schandorf, C.

2012-01-01

Profiles of 1,671 patients undergoing diagnostic mammography examination at three Centres in Accra between May and December 2009 were analysed as preliminary survey to formulate a National Breast Screening Policy for Ghana. Employment category, age, body mass index, clinical history and diagnosis were indices used in the survey. The age profile of the patients ranged from 22 to 90 years, with an average of 51 years, and at 95 % confidence interval, the variance in age was 0.01. The dominant age groups of the patients surveyed were 46 - 50 years (23 %), 41 - 45 years (21 %) and 51 - 55 years (20 %). From the body mass indices, 34 % of the patients were overweight, 49 % were obese, 16 % were of normal weight and only 1 % was under weight. By the clinical history and diagnosis, about 25 % of the cases were attributed to mastalgia (pain in the breast), 4 % already diagnosed of breast cancer, while 45 % were undergoing assessment and evaluation. The probability of an obese individual to develop breast cancer out of the entire population was p = 0.004. The profiles indicated that breast screening awareness programmes should be targeted towards women between ages of 41 - 60 years. (au)

Losing weight to save lives: A review of the role of automobile weight and size in traffic fatalities

Energy Technology Data Exchange (ETDEWEB)

Ross, Marc; Wenzel, Tom

2001-07-01

Critics of higher fuel economy standards for vehicles have long argued that improving vehicle fuel economy will require reducing vehicle weight, and that would result in an increase in the number of fatalities from vehicle crashes. Several researchers have estimated that an across-the-board reduction of vehicle weight would reduce passenger safety (Evans 1991; Kahane 1997; U.S. GAO 1994). However, little research has been done on the relationship of vehicle size and fatality rates, independent of weight (see, however, Joksch, Massie, and Pichler 1998). In this report we review previous analyses of the relationship of vehicle weight and safety. We do this to study the opportunities to improve fuel economy in a more sophisticated way than across-the-board mass reduction. The aim is to explore improvements in traffic safety by making selected vehicle groups lighter, and retaining or enlarging selected vehicle dimensions. Unfortunately, the effects of size and mass have not been accurately separated in the crash fatality data, so some of our claims are only supported by general arguments from physics. In a follow-up report we will attempt to analyze crash fatality data to determine crash worthiness if the weight of certain vehicle groups would be decreased while maintaining or increasing vehicle size. The first section of this report provides an introduction to fatal vehicle crashes in the United States. We summarize several trends in automotive crash statistics over the last 20 years. Then we discuss approaches analysts have taken in studying factors that affect ''exposure'', the likelihood of being involved in a serious crash. In Section 2 we discuss standardized crash tests and the basic physics of crashes. We review previous research on the effect of vehicle mass in two-vehicle crashes in Section 3. We also present new research on reductions in risk achieved by recent light vehicles. Section 4 presents previous estimates of the effect of

Semi-analytical model of laser resonance absorption in plasmas with a parabolic density profile

International Nuclear Information System (INIS)

Pestehe, S J; Mohammadnejad, M

2010-01-01

Analytical expressions for mode conversion and resonance absorption of electromagnetic waves in inhomogeneous, unmagnetized plasmas are required for laboratory and simulation studies. Although most of the analyses of this problem have concentrated on the linear plasma density profile, there are a few research works that deal with different plasma density profiles including the parabolic profile. Almost none of them could give clear analytical formulae for the electric and magnetic components of the electromagnetic field propagating through inhomogeneous plasmas. In this paper, we have considered the resonant absorption of laser light near the critical density of plasmas with parabolic electron density profiles followed by a uniform over-dense region and have obtained expressions for the electric and magnetic vectors of laser light propagating through the plasma. An estimation of the fractional absorption of laser energy has also been carried out. It has been shown that, in contrast to the linear density profile, the energy absorption depends explicitly on the value of collision frequency as well as on a new parameter, N, called the over-dense density order.

Effects of the light beam bending on the interferometric electron density measurements

International Nuclear Information System (INIS)

Matsumoto, Y.; Koyama, K.; Tanimoto, M.; Sugiura, M.

1980-01-01

In the measurements of plasma density profile with laser interferometers, the maximum relative errors due to the deflection of laser light caused by steep gradients of the electron density are analytically evaluated. As an example the errors in the measurements of density profile of a plasma focus by using a UV-N 2 laser are estimated. (author)

QCD Phenomenology and Light-Front Wavefunctions

International Nuclear Information System (INIS)

Brodsky, Stanley J.

2001-01-01

A natural calculus for describing the bound-state structure of relativistic composite systems in quantum field theory is the light-front Fock expansion which encodes the properties of a hadrons in terms of a set of frame-independent n-particle wavefunctions. Light-front quantization in the doubly-transverse light-cone gauge has a number of remarkable advantages, including explicit unitarity, a physical Fock expansion, the absence of ghost degrees of freedom, and the decoupling properties needed to prove factorization theorems in high momentum transfer inclusive and exclusive reactions. A number of applications are discussed in these lectures, including semileptonic B decays, two-photon exclusive reactions, diffractive dissociation into jets, and deeply virtual Compton scattering. The relation of the intrinsic sea to the light-front wavefunctions is discussed. Light-front quantization can also be used in the Hamiltonian form to construct an event generator for high energy physics reactions at the amplitude level. The light-cone partition function, summed over exponentially weighted light-cone energies, has simple boost properties which may be useful for studies in heavy ion collisions. I also review recent work which shows that the structure functions measured in deep inelastic lepton scattering are affected by final-state rescattering, thus modifying their connection to light-front probability distributions. In particular, the shadowing of nuclear structure functions is due to destructive interference effects from leading-twist diffraction of the virtual photon, physics not included in the nuclear light-cone wavefunctions

Dairy cow disability weights.

Science.gov (United States)

McConnel, Craig S; McNeil, Ashleigh A; Hadrich, Joleen C; Lombard, Jason E; Garry, Franklyn B; Heller, Jane

2017-08-01

expected impact whereas other diseases elicited a wider breadth of impact. This was particularly apparent with respect to calving trauma, lameness and musculoskeletal injury, all of which could be redefined using gradients of severity or accounting for sequelae. These disability weight distributions serve as an initial step in the development of the disease-adjusted lactation (DALact) metric. They will be used to assess the time lost due to dynamic phases of dairy cow diseases and injuries. Prioritizing health interventions based on time expands the discussion of animal health to view profits and losses in light of the quality and length of life. Copyright © 2017 Elsevier B.V. All rights reserved.

Baropodometric technology used to analyze types of weight-bearing during hemiparetic upright position

Directory of Open Access Journals (Sweden)

Lidiane Teles de Menezes

Full Text Available INTRODUCTION: Although baropodometric analysis has been published since the 1990s, only now it is found a considerable number of studies showing different uses in the rehabilitation. OBJECTIVE: To amplify the use of this technology, this research aimed to analyze baropodometric records during upright position of subjects with hemiparesis, describing a way to define weight-bearing profiles in this population. METHOD: 20 healthy subjects were matched by gender and age with 12 subjects with chronic spastic hemiparesis. This control group was formed to establish the limits of symmetry during weight-bearing distribution in the hemiparesis group. Next, hemiparesis group was submitted to procedures to measure baropodometric records used to provide variables related to the weight-bearing distribution, the arch index and the displacements in the center of pressure (CoP. Data were used to compare differences among kinds of weight-bearing distribution (symmetric, asymmetric toward non-paretic or paretic foot and coordination system for CoP displacements. RESULTS: Hemiparesis group was compounded by eight symmetrics, eight asymmetrics toward non-paretic foot and four asymmetric toward paretic foot. Significant differences in the weight-bearing distributions between non-predominantly and predominantly used foot did not promote differences in the other baropodometric records (peak and mean of pressure, and support area. Mainly in the asymmetry toward non-paretic foot it was observed significant modifications of the baropodometric records. CONCLUSION: Baropodometric technology can be used to analyze weight-bearing distribution during upright position of subjects with hemiparesis, detecting different kinds of weight-bearing profiles useful to therapeutic programs and researches involving subjects with this disability.

Effects of light-emitting diode light v. fluorescent light on growing performance, activity levels and well-being of non-beak-trimmed W-36 pullets.

Science.gov (United States)

Liu, K; Xin, H; Settar, P

2018-01-01

More energy-efficient, readily dimmable, long-lasting and more affordable light-emitting diode (LED) lights are increasingly finding applications in poultry production facilities. Despite anecdotal evidence about the benefits of such lighting on bird performance and behavior, concrete research data were lacking. In this study, a commercial poultry-specific LED light (dim-to-blue, controllable correlated color temperature (CCT) from 4500 to 5300 K) and a typical compact fluorescent light (CFL) (soft white, CCT=2700 K) were compared with regards to their effects on growing performance, activity levels, and feather and comb conditions of non-beak-trimmed W-36 pullets during a 14-week rearing period. A total of 1280-day-old pullets in two successive batches, 640 birds each, were used in the study. For each batch, pullets were randomly assigned to four identical litter-floor rooms equipped with perches, two rooms per light regimen, 160 birds per room. Body weight, BW uniformity (BWU), BW gain (BWG) and cumulative mortality rate (CMR) of the pullets were determined every 2 weeks from day-old to 14 weeks of age (WOA). Activity levels of the pullets at 5 to 14 WOA were delineated by movement index. Results revealed that pullets under the LED and CFL lights had comparable BW (1140±5 g v. 1135±5 g, P=0.41), BWU (90.8±1.0% v. 91.9±1.0%, P=0.48) and CMR (1.3±0.6% v. 2.7±0.6%, P=0.18) at 14 WOA despite some varying BWG during the rearing. Circadian activity levels of the pullets were higher under the LED light than under the CFL light, possibly resulting from differences in spectrum and/or perceived light intensity between the two lights. No feather damage or comb wound was apparent in either light regimen at the end of the rearing period. The results contribute to understanding the impact of emerging LED lights on pullets rearing which is a critical component of egg production.

The impact of body weight management in chronic kidney disease patients with obesity.

Science.gov (United States)

Wang, Ya-Ling; Shu, Kuo-Hsiung; Yang, Mei-Fang; Yang, Wen-Ching; Wu, Ming-Ju; Lin, Tzu-Mei; Chen, Cheng-Hsu

2013-09-01

Chronic kidney disease (CKD) and obesity are important public health concerns. Because obesity may initiate and/or accelerate kidney damage, weight control may benefit CKD patients. We examined the influence of dietary management and physical exercise in 38 obese CKD patients with or without target reduction of body weight 3% or more from baseline. After a 2-month lifestyle intervention program, those with target body weight control had significant improvement of blood pressure control, as well as reduced lipid profiles, serum creatinine level (1.1 ± 0.3 vs. 0.8 ± 0.3; P management and exercise were associated with improvements in health-related physical fitness, cardiovascular risk factors (blood pressure and lipid control), and renal profiles in obese CKD patients. Supportive individualized programs for lifestyle change could exert beneficial effects, but long-term research with a larger patient population is needed to elucidate the optimal effective combination of dietary management and exercise. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Weight loss predictability by plasma metabolic signatures in adults with obesity and morbid obesity of the DiOGenes study

DEFF Research Database (Denmark)

Stroeve, Johanna H M; Saccenti, Edoardo; Bouwman, Jildau

2016-01-01

predictive for weight loss were acetoacetate, triacylglycerols, phosphatidylcholines, specific amino acids, and creatine and creatinine. This metabolic profile suggests that high energy metabolism activity results in higher amounts of weight loss. CONCLUSIONS: Possible predictive (pre-diet) markers were...

A Lifetime Prediction Method for LEDs Considering Real Mission Profiles

DEFF Research Database (Denmark)

Qu, Xiaohui; Wang, Huai; Zhan, Xiaoqing

2017-01-01

operations due to the varying operational and environmental conditions during the entire service time (i.e., mission profiles). To overcome the challenge, this paper proposes an advanced lifetime prediction method, which takes into account the field operation mission profiles and also the statistical......The Light-Emitting Diode (LED) has become a very promising alternative lighting source with the advantages of longer lifetime and higher efficiency than traditional ones. The lifetime prediction of LEDs is important to guide the LED system designers to fulfill the design specifications...... properties of the life data available from accelerated degradation testing. The electrical and thermal characteristics of LEDs are measured by a T3Ster system, used for the electro-thermal modeling. It also identifies key variables (e.g., heat sink parameters) that can be designed to achieve a specified...

NESS06SM reduces body weight with an improved profile relative to SR141716A.

Science.gov (United States)

Mastinu, Andrea; Pira, Marilena; Pinna, Gérard Aimè; Pisu, Carla; Casu, Maria Antonietta; Reali, Roberta; Marcello, Stefania; Murineddu, Gabriele; Lazzari, Paolo

2013-08-01

We have recently synthesized a new series of 4,5-dihydrobenzo-oxa-cycloheptapyrazole derivatives with the aim to discover novel CB1 antagonist agents characterized by anti-obesity activity comparable to that of SR141716A but with reduced adverse effects such as anxiety and depression. Within the novel class, the CB1 antagonist 8-chloro-1-(2,4-dichlorophenyl)-N-piperidin-1-yl-4,5-dihydrobenzo-1H-6-oxa-cyclohepta(1,2-c)pyrazole-3-carboxamide (NESS06SM) has been selected as lead compound. We found that NESS06SM is a CB1 neutral antagonist, characterized by poor blood-brain barrier permeability. Moreover, NESS06SM chronic treatment determined both anti-obesity effect and cardiovascular risk factor improvement in C57BL/6N Diet Induced Obesity (DIO) mice fed with fat diet (FD mice). In fact, the mRNA gene expression in Central Nervous System (CNS) and peripheral tissues by real time PCR, showed a significant increase of orexigenic peptides and a decrease of anorexigenic peptides elicited by NESS06SM treatment, compared to control mice fed with the same diet. Moreover, in contrast to SR141716A treatment, the chronic administration of NESS06SM did not change mRNA expression of both monoaminergic transporters and neurotrophins highly related with anxiety and mood disorders. Our results suggest that NESS06SM reduces body weight and it can restore the disrupted expression profile of genes linked to the hunger-satiety circuit without altering monoaminergic transmission probably avoiding SR141716A side effects. Therefore the novel CB1 neutral antagonist could represent a useful candidate agent for the treatment of obesity and its metabolic complications. Copyright © 2013 Elsevier Ltd. All rights reserved.

CROSS-CORRELATION WEAK LENSING OF SDSS GALAXY CLUSTERS. III. MASS-TO-LIGHT RATIOS

International Nuclear Information System (INIS)

Sheldon, Erin S.; Johnston, David E.; Masjedi, Morad; Blanton, Michael R.; McKay, Timothy A.; Scranton, Ryan; Wechsler, Risa H.; Koester, Benjamin P.; Hansen, Sarah M.; Frieman, Joshua A.; Annis, James

2009-01-01

We present measurements of the excess mass-to-light ratio (M/L) measured around MaxBCG galaxy clusters observed in the Sloan Digital Sky Survey. This red-sequence cluster sample includes objects from small groups with M 200 ∼ 5 x 10 12 h -1 M sun to clusters with M 200 ∼ 10 15 h -1 M sun . Using cross-correlation weak lensing, we measure the excess mass density profile above the universal mean Δρ(r)=ρ(r)-ρ-bar for clusters in bins of richness and optical luminosity. We also measure the excess luminosity density Δl(r)=l(r)-l-bar measured in the z = 0.25 i band. For both mass and light, we de-project the profiles to produce three-dimensional mass and light profiles over scales from 25 h -1 kpc to 22 h -1 Mpc. From these profiles we calculate the cumulative excess mass ΔM(r) and excess light ΔL(r) as a function of separation from the BCG. On small scales, where ρ(r)>>ρ-bar, the integrated mass-to-light profile (ΔM/ΔL)(r) may be interpreted as the cluster M/L. We find the (ΔM/ΔL) 200 , the M/L within r 200 , scales with cluster mass as a power law with index 0.33 ± 0.02. On large scales, where ρ(r)∼ρ-bar, the ΔM/ΔL approaches an asymptotic value independent of cluster richness. For small groups, the mean (ΔM/ΔL) 200 is much smaller than the asymptotic value, while for large clusters (ΔM/ΔL) 200 is consistent with the asymptotic value. This asymptotic value should be proportional to the mean M/L of the universe (M/L). We find (M/L)b -2 M/L = 362 ± 54h (statistical). There is additional uncertainty in the overall calibration at the ∼10% level. The parameter b 2 M/L is primarily a function of the bias of the L ∼ * galaxies used as light tracers, and should be of order unity. Multiplying by the luminosity density in the same bandpass we find Ω m b -2 M/L = 0.20 ± 0.03, independent of the Hubble parameter.

UVA, UVB Light Doses and Harvesting Time Differentially Tailor Glucosinolate and Phenolic Profiles in Broccoli Sprouts.

Science.gov (United States)

Moreira-Rodríguez, Melissa; Nair, Vimal; Benavides, Jorge; Cisneros-Zevallos, Luis; Jacobo-Velázquez, Daniel A

2017-06-26

Broccoli sprouts contain health-promoting glucosinolate and phenolic compounds that can be enhanced by applying ultraviolet light (UV). Here, the effect of UVA or UVB radiation on glucosinolate and phenolic profiles was assessed in broccoli sprouts. Sprouts were exposed for 120 min to low intensity and high intensity UVA (UVA L , UVA H ) or UVB (UVB L , UVB H ) with UV intensity values of 3.16, 4.05, 2.28 and 3.34 W/m², respectively. Harvest occurred 2 or 24 h post-treatment; and methanol/water or ethanol/water (70%, v / v ) extracts were prepared. Seven glucosinolates and 22 phenolics were identified. Ethanol extracts showed higher levels of certain glucosinolates such as glucoraphanin, whereas methanol extracts showed slight higher levels of phenolics. The highest glucosinolate accumulation occurred 24 h after UVB H treatment, increasing 4-methoxy-glucobrassicin, glucobrassicin and glucoraphanin by ~170, 78 and 73%, respectively. Furthermore, UVA L radiation and harvest 2 h afterwards accumulated gallic acid hexoside I (~14%), 4- O -caffeoylquinic acid (~42%), gallic acid derivative (~48%) and 1-sinapoyl-2,2-diferulolyl-gentiobiose (~61%). Increases in sinapoyl malate (~12%), gallotannic acid (~48%) and 5-sinapoyl-quinic acid (~121%) were observed with UVB H Results indicate that UV-irradiated broccoli sprouts could be exploited as a functional food for fresh consumption or as a source of bioactive phytochemicals with potential industrial applications.

UVA, UVB Light Doses and Harvesting Time Differentially Tailor Glucosinolate and Phenolic Profiles in Broccoli Sprouts

Directory of Open Access Journals (Sweden)

Melissa Moreira-Rodríguez

2017-06-01

Full Text Available Broccoli sprouts contain health-promoting glucosinolate and phenolic compounds that can be enhanced by applying ultraviolet light (UV. Here, the effect of UVA or UVB radiation on glucosinolate and phenolic profiles was assessed in broccoli sprouts. Sprouts were exposed for 120 min to low intensity and high intensity UVA (UVAL, UVAH or UVB (UVBL, UVBH with UV intensity values of 3.16, 4.05, 2.28 and 3.34 W/m2, respectively. Harvest occurred 2 or 24 h post-treatment; and methanol/water or ethanol/water (70%, v/v extracts were prepared. Seven glucosinolates and 22 phenolics were identified. Ethanol extracts showed higher levels of certain glucosinolates such as glucoraphanin, whereas methanol extracts showed slight higher levels of phenolics. The highest glucosinolate accumulation occurred 24 h after UVBH treatment, increasing 4-methoxy-glucobrassicin, glucobrassicin and glucoraphanin by ~170, 78 and 73%, respectively. Furthermore, UVAL radiation and harvest 2 h afterwards accumulated gallic acid hexoside I (~14%, 4-O-caffeoylquinic acid (~42%, gallic acid derivative (~48% and 1-sinapoyl-2,2-diferulolyl-gentiobiose (~61%. Increases in sinapoyl malate (~12%, gallotannic acid (~48% and 5-sinapoyl-quinic acid (~121% were observed with UVBH Results indicate that UV-irradiated broccoli sprouts could be exploited as a functional food for fresh consumption or as a source of bioactive phytochemicals with potential industrial applications.

Analysis of photosynthate translocation velocity and measurement of weighted average velocity in transporting pathway of crops

International Nuclear Information System (INIS)

Ge Cailin; Luo Shishi; Gong Jian; Zhang Hao; Ma Fei

1996-08-01

The translocation profile pattern of 14 C-photosynthate along the transporting pathway in crops were monitored by pulse-labelling a mature leaf with 14 CO 2 . The progressive spreading of translocation profile pattern along the sheath or stem indicates that the translocation of photosynthate along the sheath or stem proceed with a range of velocities rather than with just a single velocity. The method for measuring the weighted average velocity of photosynthate translocation along the sheath or stem was established in living crops. The weighted average velocity and the maximum velocity of photosynthate translocation along the sheath in rice and maize were measured actually. (4 figs., 3 tabs.)

Influence of light intensity on the toxicity of atrazine to the submerged freshwater aquatic macrophyte Elodea canadensis.

Science.gov (United States)

Brain, Richard A; Hoberg, James; Hosmer, Alan J; Wall, Steven B

2012-05-01

Light intensity can have a profound influence on the degree of phytotoxicity experienced by plants exposed to photosystem II (PSII) inhibiting herbicides. This relationship was evaluated in the submerged aquatic macrophyte Elodea canadensis exposed to three different concentrations of atrazine (510, 1000 and 2000 μg a.i./L) plus an untreated control at three different light intensities (0, 500 and 6000 lx) under static-renewal conditions for 14 days. Under 500 lx light intensity, control plants demonstrated a rapid increase in shoot length but minimal increase in dry shoot weight, suggesting limited photosynthesis. Based on shoot-length and biomass, growth was not affected by any atrazine exposure relative to controls under dark conditions (0 lx). Under low-light conditions at 500 lx, exposures to 510, 1000 and 2000 μg a.i./L atrazine significantly decreased net shoot lengths by 34%, 38% and 35%, respectively, relative to corresponding (500 lx) controls. However, atrazine exposure under this light condition did not significantly decrease biomass (dry shoot weight). Compared to 6000 lx, only approximately 8% of photosynthetically active radiation (PAR) was measured under 500 lx intensity, indicating that minimal PAR was available for photosynthesis. Under optimal light conditions (6000 lx), net shoot lengths significantly decreased in the treated atrazine groups by 48%, 51% and 68%, and net dry shoot weights (biomass) were significantly decreased by 79%, 81% and 91%, respectively, relative to corresponding (6000 lx) controls. These data show that under low light conditions, atrazine-induced effects on dry shoot weight (biomass) are dependent on available PAR and active photosynthesis. Copyright © 2011 Elsevier Inc. All rights reserved.

SEARCHING FOR LOW WEIGHT PSEUDO-CODEWORDS

International Nuclear Information System (INIS)

Chertkov, Michael; Stepanov, Mikhail

2007-01-01

Belief Propagation (BP) and Linear Programming (LP) decodings of LDPC codes are discussed. The authors summarize results of instanton/pseudo-codeword approach developed for analysis of the error-floor domain of the codes. Instantons are special, code and decoding specific, configurations of the channel noise contributing most to the Frame-Error-Rate (FER). Instantons are decoded into pseudo-codewords. Instanton/pseudo-codeword with the lowest weight describes the largest Signal-to-Noise-Ratio (SNR) asymptotic of FER, while the whole spectra of the low weight instantons is descriptive of the FER vs. SNR profile in the extended error-floor domain. First, they describe a general optimization method that allows to find the instantons for any coding/decoding. Second, they introduce LP-specific pseudo-codeword search algorithm that allows efficient calculations of the pseudo-codeword spectra. Finally, they discuss results of combined BP/LP error-floor exploration experiments for two mode codes.

SEARCHING FOR LOW WEIGHT PSEUDO-CODEWORDS

Energy Technology Data Exchange (ETDEWEB)

CHERTKOV, MICHAEL [Los Alamos National Laboratory; STEPANOV, MIKHAIL [Los Alamos National Laboratory

2007-01-23

Belief Propagation (BP) and Linear Programming (LP) decodings of LDPC codes are discussed. The authors summarize results of instanton/pseudo-codeword approach developed for analysis of the error-floor domain of the codes. Instantons are special, code and decoding specific, configurations of the channel noise contributing most to the Frame-Error-Rate (FER). Instantons are decoded into pseudo-codewords. Instanton/pseudo-codeword with the lowest weight describes the largest Signal-to-Noise-Ratio (SNR) asymptotic of FER, while the whole spectra of the low weight instantons is descriptive of the FER vs. SNR profile in the extended error-floor domain. First, they describe a general optimization method that allows to find the instantons for any coding/decoding. Second, they introduce LP-specific pseudo-codeword search algorithm that allows efficient calculations of the pseudo-codeword spectra. Finally, they discuss results of combined BP/LP error-floor exploration experiments for two mode codes.

Gain weight by "going diet?" Artificial sweeteners and the neurobiology of sugar cravings: Neuroscience 2010.

Science.gov (United States)

Yang, Qing

2010-06-01

America's obesity epidemic has gathered much media attention recently. A rise in the percent of the population who are obese coincides with an increase in the widespread use of non-caloric artificial sweeteners, such as aspartame (e.g., Diet Coke) and sucralose (e.g., Pepsi One), in food products (Figure 1). Both forward and reverse causalities have been proposed. While people often choose "diet" or "light" products to lose weight, research studies suggest that artificial sweeteners may contribute to weight gain. In this mini-review, inspired by a discussion with Dr. Dana Small at Yale's Neuroscience 2010 conference in April, I first examine the development of artificial sweeteners in a historic context. I then summarize the epidemiological and experimental evidence concerning their effects on weight. Finally, I attempt to explain those effects in light of the neurobiology of food reward.

Ponderomotive and thermal filamentation of laser light

International Nuclear Information System (INIS)

Kruer, W.L.

1985-01-01

As targets are irradiated with longer, more energetic pulses of laser light, longer-scalelength plasmas are produced. Filamentation is a potentially important process in such plasmas. In this instability, perturbations in the intensity profile of an incident light beam grow in amplitude, causing the beam to break up into intense filaments. The instability arises when a local increase in the light intensity creates a depression in plasma density either directly, via the ponderomotive force, or indirectly, via enhanced collisional absorption and subsequent plasma expansion. The density depression refracts the light into the lower-density region, enhancing the intensity perturbations. The instability is termed either ponderomotive or thermal filamentation, depending on which mechanism generates the density depression. The analogous process involving the entire beam is called self-focusing. Filamentation can significantly affect laser-plasma coupling. Intensity enhancements can introduce or modify other instabilities, change the location of the energy deposition, and possibly aggravate deleterious collective effects such as hot-electron generation

Characteristics of time-domain optical coherence tomography profiles generated from blood-saline mixtures

International Nuclear Information System (INIS)

Popescu, Dan P; Sowa, Michael G

2009-01-01

Time-domain optical coherence tomography (OCT) employing a 1300 nm broadband source is used to study flowing blood-saline mixtures with blood concentration ranging from 20% to 100%. The study emphasizes the characteristics of the recorded OCT signal and its connection with the properties of the corresponding fluids. There are three regions with distinct properties along the compounded OCT profiles showing the signal dependence on depth. The recorded OCT signal increases for the first 80 μm into the fluid. The flow characteristics of the solution and the average spatial orientation of the blood cells can be extracted from this region of the OCT profile. In the second region, the OCT signal decreases with depth into the sample. An admixture of quasi-ballistic light detected after a single reflection and light recorded after undergoing multiple-scattering interactions with blood cells contributes to the signal recorded in this region. As a consequence, the attenuation of OCT signal with depth into the sample shows a weak dependence on the concentration of blood over this region. The third region starts at a depth of approximately 0.6 mm within all the studied blood-saline mixtures. OCT signal recorded from this region is dominated by light detected after multiple-scattering interactions with blood cells. This region of the OCT profile is characterized by a reduced rate of attenuation with depth compared to the rate recorded along the second region of the compounded profile. A geometrical method is used to estimate the contribution from multiple-scattered light to the OCT signal. The multiple-scattered component shows a parabolic dependence on blood concentration with a maximum contribution at a blood concentration of 55%.

Low Molecular Weight Z-Tetraol Boundary Lubricant Films in Hard Disk Drives

Directory of Open Access Journals (Sweden)

R. J. Waltman

2012-01-01

Full Text Available Lower molecular weight Z-Tetraol films exhibit increased mechanical spacing in the slider-disk interface due to a lower z-profile. An increased resistance to lubricant disturbance on the disk surface (e.g., lube moguls with decreasing film thickness is attributed to an increasing contribution from the polar component of the disjoining pressure. Evaporative loss at temperatures typically encountered in a hard-disk drive also increases with decreasing molecular weight but is strongly dependent on the initial bonded fraction.

Dissipative light-bullets in the filamentation of femtosecond pulses

International Nuclear Information System (INIS)

Porras, M.A.; Gonzalo, I.

2010-01-01

Complete text of publication follows. With the growing interest in filamentation in solid and liquid media, the regime of filamentation with anomalous dispersion is receiving more attention. In this work we show that basics aspects of the filament dynamics in this regime can be explained in terms of a novel type of light-bullet, which is not of solitary or of conical types, but a wave-packet that maximizes the energy dissipation into the medium while remaining localized and stationary in propagation. We first show that a nonlinear optical medium at a given carrier wave length at which dispersion is anomalous, supports 'dissipative' light-bullets, i.e., waves localized in space and time and that propagate without change as a result of a balance between nonlinear compression and nonlinear absorption. Among them, the particular dissipative light-bullet with the highest possible dissipation is unique in a given medium, in the sense that all its properties are fixed by the properties of the medium at the carrier wave length. In this light-bullet, self-focusing continuously transports energy towards the pulse center by an amount that just compensates for the nonlinear losses. Figure 1(a) shows the radial profiles of the dissipative light-bullets that maximizes energy dissipation for several orders of multi-photon absorption responsible for the nonlinear losses. We have also found that this dissipative light-bullet tends to be spontaneously formed in the filamentary dynamics in media with anomalous dispersion. Figure 1(b) shows the peak intensity, the total energy and losses of a pulse that undergoes self-focusing and filamentation in an ideal medium with only Kerr nonlinearity and multi-photon absorption. This simple model reproduces the particularly long filament 'segments' and the 'burst' observed in experiments and in more accurate simulations. The peak intensity in the filament is identical to that of the dissipative light-bullet with maximum dissipation, and the

Non-destructive profile measurement of intensive heavy ion beams; Zerstoerungsfreie Profilmessung intensiver Schwerionenstrahlen

Energy Technology Data Exchange (ETDEWEB)

Becker, Frank

2010-02-08

Within the framework of the FAIR-project (Facility for Antiproton and Ion Research) at GSI (Helmholtz Center for Heavy Ion Research), high intensity beams from protons to uranium ions with kinetic energies up to 30 AGeV are foreseen. Present GSI-accelerators like the UNILAC and the Heavy Ion Synchrotron (SIS-18) with a magnetic rigidity of 18 Tm will be used as injectors for the future synchrotron (SIS-100). Their beam current will be increased by up to two orders of magnitude. An accurate beam position and beam profile measurement is mandatory for a safe operation of transport sections, in particular in front of production targets (Fragment Separator (FRS)-target, anti p-production-target and Warm Dense Matter (WDM)-targets). Conventional intercepting profile monitors will not withstand the thermal stress of intensive ion beams, particularly for low energy applications or focused beams. For transverse profile determination a non-intercepting Beam Induced Fluorescence (BIF)-monitor was developed, working with residual gas. The BIF-monitor exploits fluorescence light emitted by residual gas molecules after atomic collisions with beam ions. Fluorescence-images were recorded with an image-intensified camera system, and beam profiles were obtained by projecting these images. Within the scope of this dissertation the following topics have been investigated: The photon yield, profile shape and background contribution were determined for different ion species (H{sup +}, S{sup 6+}, Ar{sup 18+}, K{sup +}, Ni{sup 9+}, Xe{sup 48+}, Ta{sup 24+}, Au{sup 65+}, U{sup 73+}), beam energies (7.7 AkeV-750 AMeV), gas pressures (10{sup -6}-3 mbar) and gas species (N{sub 2}, He, Ne, Ar, Kr, Xe). Applying an imaging spectrograph and narrowband 10 nm interference filters, the spectral response was mapped and associated with the corresponding gas transitions. Spectrally resolved beam profiles were also obtained form the spectrographic images. Major results are the light yield showing a

Metasurfaces-based holography and beam shaping: engineering the phase profile of light

Directory of Open Access Journals (Sweden)

Scheuer Jacob

2016-08-01

Full Text Available The ability to engineer and shape the phase profile of optical beams is in the heart of any optical element. Be it a simple lens or a sophisticated holographic element, the functionality of such components is dictated by their spatial phase response. In contrast to conventional optical components which rely on thickness variation to induce a phase profile, metasurfaces facilitate the realization of arbitrary phase distributions using large arrays with sub-wavelength and ultrathin (tens of nanometers features. Such components can be easily realized using a single lithographic step and is highly suited for patterning a variety of substrates, including nonplanar and soft surfaces. In this article, we review the recent developments, potential, and opportunities of metasurfaces applications. We focus primarily on flat optical devices, holography, and beam-shaping applications as these are the key ingredients needed for the development of a new generation of optical devices which could find widespread applications in photonics.

Design of a multifiber light delivery system for photoacoustic-guided surgery

Science.gov (United States)

Eddins, Blackberrie; Bell, Muyinatu A. Lediju

2017-04-01

This work explores light delivery optimization for photoacoustic-guided minimally invasive surgeries, such as the endonasal transsphenoidal approach. Monte Carlo simulations were employed to study three-dimensional light propagation in tissue, comprising one or two 4-mm diameter arteries located 3 mm below bone, an absorbing metallic drill contacting the bone surface, and a single light source placed next to the 2.4-mm diameter drill shaft with a 2.9-mm diameter spherical drill tip. The optimal fiber distance from the drill shaft was determined from the maximum normalized fluence to the underlying artery. Using this optimal fiber-to-drill shaft distance, Zemax simulations were employed to propagate Gaussian beams through one or more 600 micron-core diameter optical fibers for detection on the bone surface. When the number of equally spaced fibers surrounding the drill increased, a single merged optical profile formed with seven or more fibers, determined by thresholding the resulting light profile images at 1/e times the maximum intensity. We used these simulations to inform design requirements, build a one to seven multifiber light delivery prototype to surround a surgical drill, and demonstrate its ability to simultaneously visualize the tool tip and blood vessel targets in the absence and presence of bone. The results and methodology are generalizable to multiple interventional photoacoustic applications.

A lifetime prediction method for LEDs considering mission profiles

DEFF Research Database (Denmark)

Qu, Xiaohui; Wang, Huai; Zhan, Xiaoqing

2016-01-01

and to benchmark the cost-competitiveness of different lighting technologies. The existing lifetime data released by LED manufacturers or standard organizations are usually applicable only for specific temperature and current levels. Significant lifetime discrepancies may be observed in field operations due...... to the varying operational and environmental conditions during the entire service time (i.e., mission profiles). To overcome the challenge, this paper proposes an advanced lifetime prediction method, which takes into account the field operation mission profiles and the statistical properties of the life data...

Toward an understanding of antipsychotic drug induced weight gain - use of a rodent model

OpenAIRE

Stefanidis, Aneta

2017-01-01

Antipsychotic drug therapy is a fundamental tool in the treatment of schizophrenia and other psychoses. Recent years have seen the development of new antipsychotic compounds with an improved acute adverse effect profile; however these are often associated with weight gain and increased risk of metabolic disturbances. Olanzapine, despite its considerable adverse impact on weight gain and associated pathologies, has been recognized as the most efficacious antipsychotic drug in the treatment of ...

Overlapping community detection in weighted networks via a Bayesian approach

Science.gov (United States)

Chen, Yi; Wang, Xiaolong; Xiang, Xin; Tang, Buzhou; Chen, Qingcai; Fan, Shixi; Bu, Junzhao

2017-02-01

Complex networks as a powerful way to represent complex systems have been widely studied during the past several years. One of the most important tasks of complex network analysis is to detect communities embedded in networks. In the real world, weighted networks are very common and may contain overlapping communities where a node is allowed to belong to multiple communities. In this paper, we propose a novel Bayesian approach, called the Bayesian mixture network (BMN) model, to detect overlapping communities in weighted networks. The advantages of our method are (i) providing soft-partition solutions in weighted networks; (ii) providing soft memberships, which quantify 'how strongly' a node belongs to a community. Experiments on a large number of real and synthetic networks show that our model has the ability in detecting overlapping communities in weighted networks and is competitive with other state-of-the-art models at shedding light on community partition.

Lightweight, Light-Trapped, Thin GaAs Solar Cells for Spacecraft Applications.

Science.gov (United States)

1995-10-05

improve the efficiency of this type of cell. 2 The high efficiency and light weight of the cover glass supported GaAs solar cell can have a significant...is a 3-mil cover glass and 1-mil silicone adhesive on the front surface of the GaAs solar cell. Power Output 3000 400 -{ 2400 { N 300 S18200 W/m2...the ultra-thin, light-trapped GaAs solar ceill 3. Incorporate light trapping. 0 external quantum efficiency at 850 nm increased by 5.2% 4. Develop

Acute short-term dim light exposure can lower muscle strength endurance

OpenAIRE

Arnold G. Nelson; Joke Kokkonen; Megan Mickenberg

2015-01-01

Background: Since it has been shown that spending 18 h under dim light conditions can result in reduced handgrip endurance, it was questioned whether or not a shorter exposure to dim light (i.e., 1 h) would have similar influence upon muscular endurance. Therefore this study compared the number of weighted knee extension lifts that could be done after spending 1 h in either dim or bright light. Methods: Participants (5 women, 11 men, college students 19–26 years) performed knee extension l...

Transport of light, trace impurities in Alcator C-Mod

Science.gov (United States)

Rowan, W. L.; Bespamyatnov, I. O.; Liao, K. T.; Horton, W.; Fu, X. R.; Hughes, J. W.

2012-10-01

Light impurity profiles for boron were measured in ITB, H-mode, L-mode, and I-mode discharges in Alcator C-Mod. Within this wide range of modes, the profiles varied from peaked to hollow to flat. Specifically, hollow profiles are often observed in H-mode, while ITBs produce strong peaking, and L-mode produces moderate peaking. I-mode discharges are characterized by flat impurity profiles. For the study reported here, the profiles were measured with charge exchange recombination spectroscopy. The dependences of Rv/D were sought on dimensionless quantities including ion density scale length, effective charge, collisionality, and temperature scale length. We find that neoclassical transport consistently underestimates the measured transport. The excess measured transport is assumed to be turbulent. The strongest dependence of Rv/D is with temperature scale length. In addition, the measured transport was compared with the prediction of an analytical theory of drift wave turbulence that identifies transport implications for drift waves driven by ion and impurity density gradients.

Weight and type 2 diabetes: new recommendations.

Science.gov (United States)

Gómez Huelgas, Ricardo

2016-11-01

Most patients with type 2 diabetes have excess adiposity. There is wide consensus that adequate treatment of type 2 diabetes requires a simultaneous approach to overweight/obesity and the remaining cardiovascular risk factors. Non-pharmacological interventions (diet, exercise) represent the cornerstone of the treatment of patients with type 2 diabetes. Weight loss through lifestyle modification has shown clear benefits in these patients, requiring an individualised and multidisciplinary approach with structured programmes endowed with specific resources. The weight gain associated with some antidiabetic drugs (secretagogues, glitazones, insulin) can hamper glycaemic control, compromising treatment adherence, worsening vascular risk profile, and limiting the benefits of treatment. Therefore, the current tendency is to adopt a weight-centred approach to the treatment of type 2 diabetes, giving priority to those antidiabetic drugs that have a neutral effect on weight or that favour weight loss (metformin, incretin therapies, sodium-glucose cotransporter-2 inhibitors). Metabolic surgery is an effective alternative for patients with type 2 diabetes and a BMI ≥35 kg/m 2 and allows remission of diabetes in a large proportion of patients, especially if the disease is not very advanced. A consensus document supported by various Spanish scientific societies has recently been published. This document makes a series of specific recommendations on the diagnostic and therapeutic approach to patients with diabetes and obesity. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Variety of Polarized Line Profiles in Interacting Supernovae

Science.gov (United States)

Hoffman, Jennifer L.; Huk, L. N.; Peters, C. L.

2013-01-01

The dense circumstellar material that creates strong emission lines in the spectra of interacting supernovae also gives rise to complex line polarization behavior. Viewed in polarized light, the emission line profiles of these supernovae encode information about the geometrical and optical characteristics of their surrounding circumstellar material (CSM) that is inaccessible by other observational techniques. To facilitate quantitative interpretation of these spectropolarimetric signatures, we have created a large grid of model polarized line profiles using a three-dimensional radiative transfer code that simulates polarization via electron and resonant/fluorescent line scattering. The simulated polarized lines take on an array of profile shapes that vary with viewing angle and CSM properties. We present the major results from the grid and investigate the dependence of polarized line profiles on CSM characteristics including temperature, optical depth, and geometry. These results will allow more straightforward interpretation of polarized line profiles in interacting supernovae than has previously been possible. This research is supported by the National Science Foundation through the AAG program and the XSEDE collaboration, and uses the resources of the Texas Advanced Computing Center.

Ultraviolet safety assessments of insect light traps.

Science.gov (United States)

Sliney, David H; Gilbert, David W; Lyon, Terry

2016-01-01

Near-ultraviolet (UV-A: 315-400 nm), "black-light," electric lamps were invented in 1935 and ultraviolet insect light traps (ILTs) were introduced for use in agriculture around that time. Today ILTs are used indoors in several industries and in food-service as well as in outdoor settings. With recent interest in photobiological lamp safety, safety standards are being developed to test for potentially hazardous ultraviolet emissions. A variety of UV "Black-light" ILTs were measured at a range of distances to assess potential exposures. Realistic time-weighted human exposures are shown to be well below current guidelines for human exposure to ultraviolet radiation. These UV-A exposures would be far less than the typical UV-A exposure in the outdoor environment. Proposals are made for realistic ultraviolet safety standards for ILT products.

The effects of Momordica charantia on obesity and lipid profiles of mice fed a high-fat diet.

Science.gov (United States)

Wang, Jun; Ryu, Ho Kyung

2015-10-01

The present study was conducted to investigate the effects of dried Momordica charantia aqueous extracts (MCA) and ethanol extracts (MCE) on obesity and lipid profiles in mice fed a high-fat diet. Forty two ICR mice were randomly divided into six groups. The normal group was fed a basal diet, and other groups were fed a 45% high-fat diet (HFD) for 7 weeks. The normal and HFD groups were also orally administered distilled water each day for 7 weeks. The remaining groups received Momordica charantia extract (0.5 or 1.0 g/kg/day MCA, and 0.5 or 1.0 g/kg/day MCE). In order to measure the anti-obesity and lipid profile improvement effects, body and visceral tissue weight, lipid profiles, plasma insulin levels, hepatic malondialdehyde (MDA) levels and superoxide dismutase (SOD) activity were measured. Both MCA and MCE significantly decreased body and visceral tissue weight relative to those of the HFD group (P Momordica charantia extracts have anti-obesity effects and the ability to modulate lipid prolife of mice fed a HFD by suppressing body weight gain, visceral tissue weight, plasma and hepatic lipid concentrations, and lipid peroxidation along with increasing lipid metabolism.

Tuneable light-emitting carbon-dot/polymer flexible films prepared through one-pot synthesis

Science.gov (United States)

Bhunia, Susanta Kumar; Nandi, Sukhendu; Shikler, Rafi; Jelinek, Raz

2016-02-01

Development of efficient, inexpensive, and environmentally-friendly light emitters, particularly devices that produce white light, have drawn intense interest due to diverse applications in the lighting industry, photonics, solar energy, and others. We present a simple strategy for the fabrication of flexible transparent films exhibiting tuneable light emission through one-pot synthesis of polymer matrixes with embedded carbon dots assembled in situ. Importantly, different luminescence colours were produced simply by preparing C-dot/polymer films using carbon precursors that yielded C-dots exhibiting distinct fluorescence emission profiles. Furthermore, mixtures of C-dot precursors could be also employed for fabricating films exhibiting different colours. In particular, we successfully produced films emitting white light with attractive properties (i.e. ``warm'' white light with a high colour rendering index) - a highly sought after goal in optical technologies.Development of efficient, inexpensive, and environmentally-friendly light emitters, particularly devices that produce white light, have drawn intense interest due to diverse applications in the lighting industry, photonics, solar energy, and others. We present a simple strategy for the fabrication of flexible transparent films exhibiting tuneable light emission through one-pot synthesis of polymer matrixes with embedded carbon dots assembled in situ. Importantly, different luminescence colours were produced simply by preparing C-dot/polymer films using carbon precursors that yielded C-dots exhibiting distinct fluorescence emission profiles. Furthermore, mixtures of C-dot precursors could be also employed for fabricating films exhibiting different colours. In particular, we successfully produced films emitting white light with attractive properties (i.e. ``warm'' white light with a high colour rendering index) - a highly sought after goal in optical technologies. Electronic supplementary information (ESI

Orbitally-driven magnetism in light actinide systems

International Nuclear Information System (INIS)

Cooper, B.R.; Los Alamos National Lab.

1987-01-01

We are interested in understanding the solid-state behavior characteristic of the transition regime between itinerant (bonding) and localized (correlated ionic) f-electron behavior in light actinide (uranium, neptunium and plutonium) systems. For the light actinides, the degree of f-electron localization is sensitive to chemical environment and varies widely depending on specific compound or alloy. It is important for any meaningful theory to reflect this sensitivity to chemical environment. We have focussed our attention initially on magnetic behavior, since the pertinent orbitally-driven magnetic behavior is both interesting in itself and valuable as a diagnostic tool for the f-electron behavior and sensitivity to chemical environment. The key aspect of the electronic behavior is the hybridization (mixing) of the f electrons with band electrons of other than f atomic parentage. To treat effects of hybridization quantitatively, we transform the physical mixing mathematically to resonant scattering of band electrons off f electrons. Anisotropic magnetic properties provide a way to measure the weighting of resonant scattering channels, and this weighting reflects the sensitivity to chemical environment. (orig.)

Controlled patterns of daytime light exposure improve circadian adjustment in simulated night work.

Science.gov (United States)

Dumont, Marie; Blais, Hélène; Roy, Joanie; Paquet, Jean

2009-10-01

Circadian misalignment between the endogenous circadian signal and the imposed rest-activity cycle is one of the main sources of sleep and health troubles in night shift workers. Timed bright light exposure during night work can reduce circadian misalignment in night workers, but this approach is limited by difficulties in incorporating bright light treatment into most workplaces. Controlled light and dark exposure during the daytime also has a significant impact on circadian phase and could be easier to implement in real-life situations. The authors previously described distinctive light exposure patterns in night nurses with and without circadian adaptation. In the present study, the main features of these patterns were used to design daytime light exposure profiles. Profiles were then tested in a laboratory simulation of night work to evaluate their efficacy in reducing circadian misalignment in night workers. The simulation included 2 day shifts followed by 4 consecutive night shifts (2400-0800 h). Healthy subjects (15 men and 23 women; 20-35 years old) were divided into 3 groups to test 3 daytime light exposure profiles designed to produce respectively a phase delay (delay group, n=12), a phase advance (advance group, n=13), or an unchanged circadian phase (stable group, n=13). In all 3 groups, light intensity was set at 50 lux during the nights of simulated night work. Salivary dim light melatonin onset (DLMO) showed a significant phase advance of 2.3 h (+/-1.3 h) in the advance group and a significant phase delay of 4.1 h (+/-1.3 h) in the delay group. The stable group showed a smaller but significant phase delay of 1.7 h (+/-1.6 h). Urinary 6-sulfatoxymelatonin (aMT6s) acrophases were highly correlated to salivary DLMOs. Urinary aMT6s acrophases were used to track daily phase shifts. They showed that phase shifts occurred rapidly and differed between the 3 groups by the 3rd night of simulated night work. These results show that significant phase shifts can

Profiling of Indoor Plant to Deteriorate Carbon Dioxide Using Low Light Intensity

Directory of Open Access Journals (Sweden)

Suhaimi Shamsuri Mohd Mahathir

2016-01-01

Full Text Available Reasonable grounds that human needs the plants because their abilities reduce carbon dioxide (CO2. However, it is not constantly human with the plants, especially in the building. This paper intends to study the abilities of seven plants (Anthurium, Dumb Cane, Golden Pothos, Prayer Plants, Spider Plant, and Syngonium to absorb CO2 gas. The research was conducted in chambers (one cubic meter with temperature, lux intensity and CO2 concentration at 25±10C, 300 lux, and 450±10 ppm. Before experimental were carried out, all plants selected should be assimilated with an indoor setting for performance purpose, and the experiment was conducted during daytime (9 am-5 pm. The experiments run in triplicate. Based on the results that are using extremely low light that ever conducted on plants, only Spider Plants are not capable to absorb CO2, instead turn up the CO2 rate during respiration. Meanwhile, Prayer Plant is the most plant performed with CO2 reduction is 7.62%, and this plant also has equivalent results in triplicate study based on an ANOVA test with significant value at 0.072. The conclusions of this research, only Spider Plant cannot survive at indoor condition with extremely low light for plants live and reduce CO2 concentration for indoor air quality (IAQ. The rate of 300 lux is a minimum light at indoor that are set by the Department of Occupational Safety and Health (DOSH, Malaysia.

A new method to manipulate broiler chicken growth and metabolism: Response to mixed LED light system

Science.gov (United States)

Yang, Yefeng; Yu, Yonghua; Pan, Jinming; Ying, Yibin; Zhou, Hong

2016-05-01

Present study introduced a new method to manipulate broiler chicken growth and metabolism by mixing the growth-advantage LED. We found that the green/blue LED mixed light system (G-B and G × B) have the similar stimulatory effect on chick body weight with single green light and single blue light (G and B), compared with normal artificial light (P = 0.028). Moreover, the percentage of carcass was significantly greater in the mixed light (G × B) when compared with the single light (P = 0.003). Synchronized with body weight, the mixed light (G-B and G × B) had a significant improved influence on the feed conversion of birds compared with normal light (P = 0.002). A significant improvement in feed conversion were found in mixed light (G × B) compared with single LED light (P = 0.037). G group resulted in a greater high-density lipoprotein cholesterol level than B group (P = 0.002), whereas B group resulted in a greater low-density lipoprotein cholesterol level than G group (P = 0.017). The mixed light significantly increased the birds’ glucose level in comparison with the single light (P = 0.003). This study might establish an effective strategy for maximizing growth of chickens by mixed LED technology.

Curing efficiency of three light emitting diode units at different curing profiles

Directory of Open Access Journals (Sweden)

Priyanka Verma

2016-01-01

Conclusions: Reduction of exposure time to 6 s with high-intensity curing light seemed to be clinically acceptable and should be recommended. Curing of metal brackets with single exposure from buccal side showed lower shear bond strength values.

Analysis of the Relationship Between Vehicle Weight/Size and Safety, and Implications for Federal Fuel Economy Regulation

Energy Technology Data Exchange (ETDEWEB)

Wenzel, Thomas P.

2010-03-02

This report analyzes the relationship between vehicle weight, size (wheelbase, track width, and their product, footprint), and safety, for individual vehicle makes and models. Vehicle weight and footprint are correlated with a correlation coefficient (R{sup 2}) of about 0.62. The relationship is stronger for cars (0.69) than for light trucks (0.42); light trucks include minivans, fullsize vans, truck-based SUVs, crossover SUVs, and pickup trucks. The correlation between wheelbase and track width, the components of footprint, is about 0.61 for all light vehicles, 0.62 for cars and 0.48 for light trucks. However, the footprint data used in this analysis does not vary for different versions of the same vehicle model, as curb weight does; the analysis could be improved with more precise data on footprint for different versions of the same vehicle model. Although US fatality risk to drivers (driver fatalities per million registered vehicles) decreases as vehicle footprint increases, there is very little correlation either for all light vehicles (0.01), or cars (0.07) or trucks (0.11). The correlation between footprint and fatality risks cars impose on drivers of other vehicles is also very low (0.01); for trucks the correlation is higher (0.30), with risk to others increasing as truck footprint increases. Fatality risks reported here do not account for differences in annual miles driven, driver age or gender, or crash location by vehicle type or model. It is difficult to account for these factors using data on national fatal crashes because the number of vehicles registered to, for instance, young males in urban areas is not readily available by vehicle type or model. State data on all police-reported crashes can be used to estimate casualty risks that account for miles driven, driver age and gender, and crash location. The number of vehicles involved in a crash can act as a proxy of the number of miles a given vehicle type, or model, is driven per year, and is a

Effect of Sitagliptin on Glycemic Control, Body Weight, Blood Pressure and Serum Lipid Profile in Type 2 Diabetic Hyperlipidemic Patients

International Nuclear Information System (INIS)

Hussain, M.; Atif, M. A.; Akhtar, L.; Ali, B.; Tunio, A. G.; Serwar, G.

2016-01-01

Background: Dyslipidaemia is a global health issue in developed as well as in developing countries. People with type 2 Diabetes mellitus are more susceptible to develop dyslipidaemia and its related complications. The objective of the study was to assess the effect of sitagliptin a (DPP-4 inhibitor) oral antidiabetic drug on blood sugar, body weight, blood pressure and dyslipidaemia in type 2 diabetic patients. Methods: This 12 weeks open label observational study was conducted at outdoor of diabetic clinic of Sheikh Zayed Medical College/Hospital, Rahim Yar Khan in which newly diagnosed type 2 diabetic patients (n=78) with poor glycaemic control(HbA1c >7.2 percent) were selected. The patient received sitagliptin 50 mg twice daily for 12 weeks. Results: After 12 weeks treatment with sitagliptin, there was a significant reduction in the value of HbA1c from 8.184 percent±0.467 at baseline to 7.0200 percent±0.459 at 12 weeks (p<0.05). Body weight also decreased significantly from 80.21kg±7.156 at baseline to 71.74 kg±6.567 at 12 weeks (p<0.05).Systolic blood pressure decreased (SBP) decreased significantly from 138.17±6.050 mmHg at baseline to 131.22±6.311 mmHg at 12 weeks (p<0.05). Significant changes were also seen in diastolic blood pressure which decreased from 83.14±6.714 mmHg at baseline to 75.28±6.481 mmHg at 12 weeks (p<0.05). Significant reduction in the serum level of total Cholesterol (TC), triglycerides (TG) and Low density lipoprotein cholesterol (LDL-C) were detected (TC: 222.09±13.538 to 209.41±13.475 mg/dl, p<0.05; TG: 170.99±6.940 to 143.45±8.279 mg/dl, p<0.05; LDL-C 120.00±5.804 to 109.06±6.278 mg/dl, p<0.05). High density lipoprotein cholesterol (HDL-C) increased significantly from 42.99±4.836 mg/dl at baseline to 49.97±3.490 mg/dl at 12 weeks. Conclusion: Sitagliptin not only improves blood glucose control but also body weight, blood pressure and lipid profile in type 2 diabetic hyperlipidaemia patients. (author)

Effect of Caffeine Co-Ingested with Carnitine on Weight, Body-Fat Percent, Serum Leptin and Lipid Profile Changes in Male Teen Soccer Players: a Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Saeed Shirali

2016-10-01

Full Text Available Background: Weight loss and decreasing the Body fat percentage (BF% is motivated to optimize performance. In order to achieve these, many supplements are used by athletes, however the possible negative or synergic effects have not been fully described in the literature, specifically in humans. The present study was conducted to investigate the co-administration effects of two common used supplements in body weight and BF% management to recommend athletes for safe weight and BF% reduction. Materials and Methods: In the present double-blind, randomized, parallel, placebo-controlled study, the effect of six-week co-administration of caffeine and carnitine was determined on changes in body weight (BW, BF%, serum leptin concentration and lipid profile (triglyceride, HDL Cholesterol, LDL Cholesterol and Total Cholesterol, fasting blood glucose (FBG, and free fatty acid (FFA changes. Twenty eight male teen soccer players  from Ahvaz-Iran, were divided in three groups (group CafPlc, caffeine (6 mg/kg/day + dextrose; group CafCar, caffeine (6 mg/kg/day + carnitine (2g; and group Plc, dextrose. Results: Caffeine-carnitine had a lowering effect on BW (P=0.02 and BF% (P=0.03, compared to caffeine alone and placebo in male teen soccer players (mean age of 16.92 ± 0.76 years. TG was significantly decreased in CafCar (P=0.04. FFA levels were increased in CafCar (P=0.04 and there was significant differences between CafCar and Plc groups (P=0.01. FBG was increased in both CafPlc and CafCar (P=0.01 and P=0.02, respectively, with no significant differences between groups. Conclusion: The synergistic effect of caffeine-carnitine might be suggested to decrease the BF% and BW, besides it may prevent the increment of FFA levels; however it should be prescribed cautiously since it increased FBG levels.

White light emission from Tm3+/Dy3+ co-doped oxyfluoride germanate glasses under UV light excitation

International Nuclear Information System (INIS)

Lakshminarayana, G.; Yang Hucheng; Qiu Jianrong

2009-01-01

In this paper, we report on the absorption and photoluminescence properties of Tm 3+ /Dy 3+ ions co-doped oxyfluoride germanate glasses for white light emission. The X-ray diffraction (XRD) and differential thermal analysis (DTA) profiles of the host glass have been carried out to confirm its structure and thermal stability. From the measured absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω 2 , Ω 4 and Ω 6 ) have been evaluated for Tm 3+ and Dy 3+ ions. A combination of blue, yellow and red emissions has emerged in these glasses, which allows the observation of bright white light when the glasses are excited by the ultraviolet light. The white light luminescence colour could be changed by varying the excitation wavelength. Also, various colours of luminescence, including white light, can be easily tuned by adjusting the concentrations of Tm 3+ or Dy 3+ ions in the co-doped glasses. Concentration quenching effect was also investigated and possible energy transfer mechanism from Dy 3+ →Tm 3+ ions was explained which is also confirmed by the decay lifetime measurements. - Graphical Abstract: A combination of blue, yellow and red emissions has emerged from Tm 3+ /Dy 3+ co-doped glasses, which allows the observation of bright white light and makes them as excellent candidates applicable in the solid-state multi-colour three-dimensional display.

Adipose gene expression prior to weight loss can differentiate and weakly predict dietary responders.

Directory of Open Access Journals (Sweden)

David M Mutch

Full Text Available BACKGROUND: The ability to identify obese individuals who will successfully lose weight in response to dietary intervention will revolutionize disease management. Therefore, we asked whether it is possible to identify subjects who will lose weight during dietary intervention using only a single gene expression snapshot. METHODOLOGY/PRINCIPAL FINDINGS: The present study involved 54 female subjects from the Nutrient-Gene Interactions in Human Obesity-Implications for Dietary Guidelines (NUGENOB trial to determine whether subcutaneous adipose tissue gene expression could be used to predict weight loss prior to the 10-week consumption of a low-fat hypocaloric diet. Using several statistical tests revealed that the gene expression profiles of responders (8-12 kgs weight loss could always be differentiated from non-responders (<4 kgs weight loss. We also assessed whether this differentiation was sufficient for prediction. Using a bottom-up (i.e. black-box approach, standard class prediction algorithms were able to predict dietary responders with up to 61.1%+/-8.1% accuracy. Using a top-down approach (i.e. using differentially expressed genes to build a classifier improved prediction accuracy to 80.9%+/-2.2%. CONCLUSION: Adipose gene expression profiling prior to the consumption of a low-fat diet is able to differentiate responders from non-responders as well as serve as a weak predictor of subjects destined to lose weight. While the degree of prediction accuracy currently achieved with a gene expression snapshot is perhaps insufficient for clinical use, this work reveals that the comprehensive molecular signature of adipose tissue paves the way for the future of personalized nutrition.

The outer disks of early-type galaxies. I. Surface-brightness profiles of barred galaxies

NARCIS (Netherlands)

Erwin, Peter; Pohlen, Michael; Beckman, John E.

We present a study of 66 barred, early-type (S0-Sb) disk galaxies, focused on the disk surface brightness profile outside the bar region, with the aim of throwing light on the nature of Freeman type I and II profiles, their origins, and their possible relation to disk truncations. This paper

Stray light characteristics of the diffractive telescope system

Science.gov (United States)

Liu, Dun; Wang, Lihua; Yang, Wei; Wu, Shibin; Fan, Bin; Wu, Fan

2018-02-01

Diffractive telescope technology is an innovation solution in construction of large light-weight space telescope. However, the nondesign orders of diffractive optical elements (DOEs) may affect the imaging performance as stray light. To study the stray light characteristics of a diffractive telescope, a prototype was developed and its stray light analysis model was established. The stray light characteristics including ghost, point source transmittance, and veiling glare index (VGI) were analyzed. During the star imaging test of the prototype, the ghost images appeared around the star image as the exposure time of the charge-coupled device improving, consistent with the simulation results. The test result of VGI was 67.11%, slightly higher than the calculated value 57.88%. The study shows that the same order diffraction of the diffractive primary lens and correcting DOE is the main factor that causes ghost images. The stray light sources outside the field of view can illuminate the image plane through nondesign orders diffraction of the primary lens and contributes to more than 90% of the stray light flux on the image plane. In summary, it is expected that these works will provide some guidance for optimizing the imaging performance of diffractive telescopes.

Influence of evanescent waves on the voxel profile in multipulse multiphoton polymerization nanofabrication

International Nuclear Information System (INIS)

Li Wei; Cao Tianxiang; Zhai Zhaohui; Yu Xuanyi; Zhang Xinzheng; Xu Jingjun

2013-01-01

The relationship between the profile of the structures obtained by multiphoton polymerization and the optical parameters of nanofabrication systems has been studied theoretically for a multipulse scheme. We find that the profile of sub-wavelength structures is greatly affected by the evanescent waves affect. Not only is the photocured polymer voxel affected by the beam profile, but the beam propagation behavior is influenced by the photocured polymer voxel. This gives us a new view of matter–light interactions in multipulse polymerization process, which is useful to the accurate control of the nanofabrication profile and the selection of new nanofabrication materials. (paper)

Cocaine's appetite for fat and the consequences on body weight.

Science.gov (United States)

Billing, Lawrence; Ersche, Karen D

2015-03-01

For many individuals in treatment for cocaine dependence, weight gain is a substantial problem during recovery. This weight gain causes significant distress and seems to increase the risk of relapse. The mechanisms underlying cocaine's effects on weight remain elusive. It is widely assumed that this weight gain reflects a metabolic or behavioural compensatory response to the cessation of cocaine use. Here we challenge this assumption and outline potential mechanisms by which chronic cocaine use produces disturbances in the regulation of fat intake and storage, through its effects on the central and peripheral nervous systems, specifically the sympathetic nervous system. We hypothesize that the cocaine-induced alteration in fat regulation results in cocaine users developing a pronounced appetite for fatty food but keeps their fat mass low. This altered fat appetite subsequently leads to excessive weight gain when individuals enter treatment and stop using cocaine. Our aim is to shed light on the neurobiological mechanisms that may underlie the alterations in eating and fat regulation in cocaine-dependent individuals, to open up potential new avenues to support these individuals in recovery.

Taming light with cold atoms

International Nuclear Information System (INIS)

Vestergaard Hau, Lene

2002-01-01

Much of the extraordinary progress of developments in communication (e-mail, and/or internet) has been achieved due to improvements in optical communication. This paper describes a new approach which could improve the speed of communication. The ability to stop light in its tracks by passing it through a cloud of ultracold atoms could lead to new techniques for optical storage. The described slow-light experiments have triggered new physics both on the experimental and theoretical fronts. The cold atom system allows the steepest possible refractive index profiles, and therefore the most dramatic effects, as Doppler effects are eliminated. Furthermore, cold atoms provide maximum flexibility in the choice of beam geometry. This is important for the storage and retrieval of multiple pulses of optical information in an atomic medium, as it would allow individual pulses to be selectively addressed. Slow and stopped light have many potential applications in optical communication and processing, including optical information storage, ultra-sensitive optical switches, and optical delay lines. It could also be used in quantum-information processing, in which quantum-mechanical information is used for computing and communication purposes. On a very different front, slow light provides us with a totally new way of probing the unusual properties of Bose-Einstein condensates

Investigation of Vacuum Arc Voltage Characteristics Under Different Axial Magnetic Field Profiles

International Nuclear Information System (INIS)

Jia Shenli; Song Xiaochuan; Huo Xintao; Shi Zongqian; Wang Lijun

2010-01-01

Characteristics of the arc voltage under different profiles of axial magnetic field were investigated experimentally in a detachable vacuum chamber with five pairs of specially designed electrodes generating both bell-shaped and saddle-shaped magnetic field profile. The arc column and cathode spot images were photographed by a high speed digital camera. The dependence of the arc voltage on arcing evolution is analyzed. It is indicated that the axial magnetic field profile could affect the arc behaviors significantly, and the arc voltage is closely related to the arc light intensity.

Diosgenin reorganises hyperglycaemia and distorted tissue lipid profile in high-fat diet-streptozotocin-induced diabetic rats.

Science.gov (United States)

Naidu, Parim Brahma; Ponmurugan, Ponnusamy; Begum, Mustapha Sabana; Mohan, Karthick; Meriga, Balaji; RavindarNaik, Ramavat; Saravanan, Ganapathy

2015-12-01

Diabetes is often connected with significant morbidity, mortality and also has a pivotal role in the development of cardiovascular diseases. Diet intervention, particularly naturaceutical antioxidants have anti-diabetic potential and avert oxidative damage linked with diabetic pathogenesis. The present study investigated the effects of diosgenin, a saponin from fenugreek, on the changes in lipid profile in plasma, liver, heart and brain in high-fat diet-streptozotocin (HFD-STZ)-induced diabetic rats. Diosgenin was administered to HFD-STZ induced diabetic rats by orally at 60 mg kg(-1) body weight for 30 days to assess its effects on body weight gain, glucose, insulin, insulin resistance and cholesterol, triglycerides, free fatty acids and phospholipids in plasma, liver, heart and brain. The levels of body weight, glucose, insulin, insulin resistance, cholesterol, triglycerides, free fatty acids, phospholipids, VLDL-C and LDL-C were increased significantly (P rats. Administration of diosgenin to HFD-STZ diabetic rats caused a decrease in body weight gain, blood glucose, insulin, insulin resistance and also it modulated lipid profile in plasma and tissues. The traditional plant fenugreek and its constituents mediate its anti-diabetic potential through mitigating hyperglycaemic status, altering insulin resistance by alleviating metabolic dysregulation of lipid profile in both plasma and tissues. © 2014 Society of Chemical Industry.

Simulating Performance Risk for Lighting Retrofit Decisions

Directory of Open Access Journals (Sweden)

Jia Hu

2015-05-01

Full Text Available In building retrofit projects, dynamic simulations are performed to simulate building performance. Uncertainty may negatively affect model calibration and predicted lighting energy savings, which increases the chance of default on performance-based contracts. Therefore, the aim of this paper is to develop a simulation-based method that can analyze lighting performance risk in lighting retrofit decisions. The model uses a surrogate model, which is constructed by adaptively selecting sample points and generating approximation surfaces with fast computing time. The surrogate model is a replacement of the computation intensive process. A statistical method is developed to generate extreme weather profile based on the 20-year historical weather data. A stochastic occupancy model was created using actual occupancy data to generate realistic occupancy patterns. Energy usage of lighting, and heating, ventilation, and air conditioning (HVAC is simulated using EnergyPlus. The method can evaluate the influence of different risk factors (e.g., variation of luminaire input wattage, varying weather conditions on lighting and HVAC energy consumption and lighting electricity demand. Probability distributions are generated to quantify the risk values. A case study was conducted to demonstrate and validate the methods. The surrogate model is a good solution for quantifying the risk factors and probability distribution of the building performance.

The Light Field Attachment: Turning a DSLR into a Light Field Camera Using a Low Budget Camera Ring

KAUST Repository

Wang, Yuwang

2016-11-16

We propose a concept for a lens attachment that turns a standard DSLR camera and lens into a light field camera. The attachment consists of 8 low-resolution, low-quality side cameras arranged around the central high-quality SLR lens. Unlike most existing light field camera architectures, this design provides a high-quality 2D image mode, while simultaneously enabling a new high-quality light field mode with a large camera baseline but little added weight, cost, or bulk compared with the base DSLR camera. From an algorithmic point of view, the high-quality light field mode is made possible by a new light field super-resolution method that first improves the spatial resolution and image quality of the side cameras and then interpolates additional views as needed. At the heart of this process is a super-resolution method that we call iterative Patch- And Depth-based Synthesis (iPADS), which combines patch-based and depth-based synthesis in a novel fashion. Experimental results obtained for both real captured data and synthetic data confirm that our method achieves substantial improvements in super-resolution for side-view images as well as the high-quality and view-coherent rendering of dense and high-resolution light fields.

Red Color Light at Different Intensities Affects the Performance, Behavioral Activities and Welfare of Broilers

Directory of Open Access Journals (Sweden)

D. Senaratna

2016-07-01

Full Text Available Red light (RL marked higher weight gain (WG and preference of broilers compared to other light colors. This study aimed to investigate how different intensities of RL affect the performance, behavior and welfare of broilers. RL treatments were T1 = high intensity (320 lux, T2 = medium intensity (20 lux; T3 = dim intensity (5 lux, T4 = control/white light at (20 lux provided on 20L:4D schedule and T5 = negative control; 12 hours dark: 12 hours day light. Cobb strain broilers were used in a Complete Randomize Design with 6 replicates. WG, water/feed intake, feed conversion ratio (FCR, mortality, behavior and welfare were assessed. At 35 d, significantly (p<0.05 highest body weight (2,147.06 g±99 was recorded by T3. Lowest body weight (1,640.55 g±56 and FCR (1.34 were recorded by T5. Skin weight was the only carcass parameter showed a significant (p<0.05 influence giving the highest (56.2 g and the lowest (12.6 g values for T5 and T1 respectively. Reduced welfare status indicated by significantly (p<0.05 higher foot pad lesions, hock burns and breast blisters was found under T3, due to reduced expression of behavior. Highest walking (2.08%±1% was performed under T1 in the evening during 29 to 35 days. Highest dust bathing (3.01%±2% was performed in the morning during 22 to 28 days and highest bird interaction (BI (4.87%±4% was observed in the evening by T5 during 14 to 21 days. Light intensity×day session×age interaction was significantly (p<0.05 affected walking, dust bathing and BI. Light intensity significantly (p<0.05 affected certain behaviors such as lying, eating, drinking, standing, walking, preening while lying, wing/leg stretching, sleeping, dozing, BI, vocalization, idling. In conclusion, birds essentially required provision of light in the night for better performance. Exposed to 5 lux contributed to higher WG, potentially indicating compromised welfare status. Further researches are suggested to investigate RL intensity based

Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae-Hyun; Cho, Kyung Mox [Pusan National University, Busan (Korea, Republic of); Park, Seong-Jun; Moon, Joonoh; Kang, Jun-Yun; Park, Jun-Young; Lee, Tae-Ho [Korea Institute of Materials Science, Changwon (Korea, Republic of)

2017-05-15

The effects of the annealing temperature on the microstructure and tensile properties of cold-rolled light-weight steels are investigated using two Fe-30Mn-xAl-0.9C alloys that contain different Al content. The initial alloy microstructure is composed of a single austenite or a mixture of austenite and ferrite depending on the nominal aluminum content. For the alloy with 9 wt%Al content, the recrystallization and grain growth of austenite occurrs depending on the annealing temperature. However, for the alloy with 11 wt%Al content, the β-Mn phase is observed after annealing for 10 min at 550~800 ℃. The β-Mn transformation kinetics is the fastest at 700 ℃. The formation of the β-Mn phase has a detrimental effect on the ductility, and this leads to significant decreases in the total elongation. The same alloy also forms κ-carbide and DO3 ordering at 550~900 ℃. The investigated alloys exhibit a fully recrystallized microstructure after annealing at 900 ℃ for 10 min, which results in a high total elongation of 25~55%with a high tensile strength of 900~1170 MPa.

Change in alcohol intake in relation to weight change in a cohort of United States men with 24 years of follow-up

Science.gov (United States)

Downer, Mary Kathryn; Bertoia, Monica L; Mukamal, Ken J; Rimm, Eric B; Stampfer, Meir J

2017-01-01

Objective We sought to prospectively investigate potential effects of alcohol by subtype on reported long-term weight change. Methods We examined change in alcohol intake (total, wine, light beer, regular beer, liquor) and simultaneous change in reported body weight within four-year periods from 1986 to 2010 from U.S. men in the Health Professionals Follow-Up Study. We adjusted for age, change in lifestyle and dietary covariates and cardiovascular risk factors. Results We observed 44,603 four-year periods from 14,971 men. Total alcohol, total beer, regular beer, and liquor, modeled as the increase in weight per increase in drink/day, were each directly associated with moderate weight gain over four-year periods, in pounds: total alcohol: 0.23 (0.10–0.35); total beer: 0.29 (0.08–0.51); regular beer: 0.61 (0.22–1.00); liquor: 0.28 (0.09–0.48). Results for wine and light beer were wine: 0.16 (−0.04–0.36); light beer: −0.38 (−1.07–0.08). Results were strongest for men weight gain at levels unlikely to be clinically meaningful. Beverage specific differences are not substantial enough to make dietary recommendations for weight loss or maintenance by beverage type. The greatest risk of weight gain was among men that increased consumption to levels well above moderation. PMID:28940996

QCD Phenomenology and Light-Front Wave Functions

International Nuclear Information System (INIS)

Brodsky, St.J.

2001-01-01

A natural calculus for describing the bound-state structure of relativistic composite systems in quantum field theory is the light-front Fock expansion which encodes the properties of a hadrons in terms of a set of frame-independent n-particle wave functions. Light-front quantization in the doubly-transverse light-cone gauge has a number of remarkable advantages, including explicit unitarity, a physical Fock expansion, the absence of ghost degrees of freedom, and the decoupling properties needed to prove factorization theorems in high momentum transfer inclusive and exclusive reactions. A number of applications are discussed in these lectures, including semileptonic B decays, two-photon exclusive reactions, diffractive dissociation into jets, and deeply virtual Compton scattering. The relation of the intrinsic sea to the light-front wave functions is discussed. Light-front quantization can also be used in the Hamiltonian form to construct an event generator for high energy physics reactions at the amplitude level. The light-cone partition function, summed over exponentially-weighted light-cone energies, has simple boost properties which may be useful for studies in heavy ion collisions. I also review recent work which shows that the structure functions measured in deep inelastic lepton scattering are affected by final-state rescattering, thus modifying their connection to light-front probability distributions. In particular, the shadowing of nuclear structure functions is due to destructive interference effects from leading-twist diffraction of the virtual photon, physics not included in the nuclear light-cone wave functions. (author)

Shedding Light on the Personality Profile of Professionals in the Outdoor Community

Science.gov (United States)

Friddle, Clay; Tochkov, Karin

2018-01-01

The outdoor community has long been used to study motivation and sensation seeking. While sensation seeking is related to the personality traits extraversion and openness there has been little research conducted on the whole personality profile of this community. This study used the Five Factor Model and the Big Five Inventory to measure the…

Calculating the weight of evidence in low-template forensic DNA casework.

Science.gov (United States)

Lohmueller, Kirk E; Rudin, Norah

2013-01-01

Interpreting and assessing the weight of low-template DNA evidence presents a formidable challenge in forensic casework. This report describes a case in which a similar mixed DNA profile was obtained from four different bloodstains. The defense proposed that the low-level minor profile came from an alternate suspect, the defendant's mistress. The strength of the evidence was assessed using a probabilistic approach that employed likelihood ratios incorporating the probability of allelic drop-out. Logistic regression was used to model the probability of drop-out using empirical validation data from the government laboratory. The DNA profile obtained from the bloodstain described in this report is at least 47 billion times more likely if, in addition to the victim, the alternate suspect was the minor contributor, than if another unrelated individual was the minor contributor. This case illustrates the utility of the probabilistic approach for interpreting complex low-template DNA profiles. © 2012 American Academy of Forensic Sciences.

The effect of intermittent lighting on metabolizable energy intake and heat production of male broilers.

Science.gov (United States)

Ohtani, S; Leeson, S

2000-02-01

Experiments were conducted to compare the effects of an intermittent lighting (IL) schedule with repeated cycles of 1 h light and 2 h darkness with a continuous lighting (CL) schedule on the performance, ME intake, and heat production of male broiler chickens. Body weight gain and feed intake were temporarily reduced after the changing from CL to IL; however, they were significantly higher in IL vs CL chickens during the subsequent period of 3 to 6 wk of age. The IL chickens exhibited a higher ME intake at 6 and 8 wk of age than did CL chickens. Total heat production in IL chickens was higher than for CL chickens, although heat production during the dark period was less than that during the light period for IL chickens. The higher feed intake observed in IL chickens appears to explain the superior body weight gain in IL broilers in simple terms.

A mobile light source for carbon/nitrogen cameras

International Nuclear Information System (INIS)

Trower, W.P.; Melekhin, V.N.; Shvedunov, V.I.; Sobenin, N.P.

1995-01-01