WorldWideScience

Sample records for profile design reflects

  1. Design and fabrication of optical thin film layers with variable thickness profile for producing variable reflectivity mirrors

    Directory of Open Access Journals (Sweden)

    Hamid R fallah

    2006-12-01

    Full Text Available   The design method and fabrication of mirrors with variable reflectivity are presented. To fabricate such a mirror a fixed mask with a circular aperture is used. The circular aperture is considered as an extended source with cosx(θas its diffusion distribution function and is the parameter for the distribution function of the particles through the aperture. The thickness profile of deposited layer is a function of this distribution. In this work, the coating system is calibrated for the materials which are used and then the parameter of the diffusion distribution function of the particles through the circular aperture is defined by experiments. Using these results, a graph is presented which connects the parameter of the circular aperture to the parameters of the thickness profile. It is then possible to deposit any type of variable reflectivity mirror using this graph. Finally, the effect of the uncertainty in measuring layer thicknesses on the phase of reflected wave and transmitted wave is investigated.

  2. Reflecting Contemporary Design Research

    DEFF Research Database (Denmark)

    Engholm, Ida

    2017-01-01

    In recent years, design research has been the object of growing attention in universities and academies throughout the world. The present paper addresses the heterogeneous character of design research and the current need for reflection on the various approaches and interests. For this purpose......, the paper follows two steps. First, it proposes a categorization of the field in the form of a position model. The paper’s underlying assumption is that design research as a discipline exists in many different forms that cannot necessarily be brought together under one common academic research tradition......; instead it is necessary to attempt to define the field in order to initiate discussions about what constitutes the various research bases for design. Second, the paper discusses the implication for future design research when it is an interdisciplinary field that involves many disciplines, mindsets...

  3. Worldwide Marine Seismic Reflection Profiles

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC maintains a large volume of both Analog and Digital seismic reflection data. Currently only a limited number of lines are available online. Digital data include...

  4. Creative reflection in industrial design

    NARCIS (Netherlands)

    Verbrugge, J.K.; Verbrugge, J.K.

    2012-01-01

    The dissertation is a reflection of the writer on his career as an industrial designer of Demand-Driven Design for a period of approximately 25 years. This period is exposed with a discussion of five designs. The projects are introduced by developments in the surrounding design landscape, such as

  5. Designing for critique, designing for reflection

    DEFF Research Database (Denmark)

    Løfgreen, Lars Bo

    2010-01-01

    litteraturliste og et stikordsregister. Bogen rummer kapitlerne: “Visual topography: analysing the visual context of an interactive interface” af Lise Agerbæk, “Designing (with) Creativity” af Heidi Philipsen, “Designing for critique, designing for reflection – the (re)emergence of aesthetics in current design...

  6. Reflections on Design Methodology Research

    DEFF Research Database (Denmark)

    2011-01-01

    We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

  7. Remote Sensing and Reflectance Profiling in Entomology.

    Science.gov (United States)

    Nansen, Christian; Elliott, Norman

    2016-01-01

    Remote sensing describes the characterization of the status of objects and/or the classification of their identity based on a combination of spectral features extracted from reflectance or transmission profiles of radiometric energy. Remote sensing can be benchtop based, and therefore acquired at a high spatial resolution, or airborne at lower spatial resolution to cover large areas. Despite important challenges, airborne remote sensing technologies will undoubtedly be of major importance in optimized management of agricultural systems in the twenty-first century. Benchtop remote sensing applications are becoming important in insect systematics and in phenomics studies of insect behavior and physiology. This review highlights how remote sensing influences entomological research by enabling scientists to nondestructively monitor how individual insects respond to treatments and ambient conditions. Furthermore, novel remote sensing technologies are creating intriguing interdisciplinary bridges between entomology and disciplines such as informatics and electrical engineering.

  8. The role of emotion in design reflection

    NARCIS (Netherlands)

    Hammer, D.K.; Reymen, I.M.M.J.; Mcdonagh, Deana; Hekkert, Paul; Van Erp, Jeroen; Gyi, Diane

    2003-01-01

    Reflection on design processes performed by designers is called design reflection. In our view, this kind of reflection aims at answering essential questions like “Is my design answering the stakeholder concerns?”, “Am I solving the essential problems or am I wasting time on irrelevant aspects?”,

  9. Reflective Drawing as a Tool for Reflection in Design Research

    Science.gov (United States)

    Calvo, Mirian

    2017-01-01

    This article explores the role of drawing as a tool for reflection. It reports on a PhD research project that aims to identify and analyse the value that co-design processes can bring to participants and their communities. The research is associated with Leapfrog, a three-year project funded by the UK Arts and Humanities Research Council (AHRC).…

  10. The playful and reflective game designer

    DEFF Research Database (Denmark)

    Majgaard, Gunver

    2014-01-01

    Abstract: A group of first-semester engineering students participated in a game design course. The aim of the course was to learn how to design computer games and programming skills by creating their own games, thereby applying their game-playing experiences to gain knowledge about game design....... The aim was for students to develop a more critically reflective perspective on video games and game design. In applying their game experiences, they developed their own digital prototypes and participated in reflective discussions on the concept of games: what makes them interesting and how...... they are constructed. The students used the GameMaker programming tool, which can be used without any prior programming knowledge. The tool allows for the easy development of 2D game prototypes.The didactic approach was based on play as a lever for the design process, and on constructionistic and reflective learning...

  11. An Argument for Design Space Reflection

    DEFF Research Database (Denmark)

    Dove, Graham; Halskov, Kim; Hansen, Nicolai Brodersen

    2016-01-01

    We argue that documenting, revisiting and reflecting on the design space of a project provides three important benefits. First it increases our awareness of the constraints introduced by particular design choices. Second, this qualifies our understanding of the way a design space has been filtered...... by design activities. Third we are prompted to challenge these constraints and reconsider disregarded opportunities. To support this argument, we revisit key activities from two projects in our interaction design lab’s portfolio, selected because of the detailed documentation available. We also introduce...... SnapShot, the web-based tool we are developing for this method of design space reflection. Based on these examples, we present a critical discussion and outline areas of future research....

  12. In Two Minds: How Reflections Influence Software Architecture Design Thinking : how reflections influence software design thinking

    NARCIS (Netherlands)

    Razavian, Maryam; Tang, Anthony; Capilla, Rafael; Lago, Patricia

    2016-01-01

    We theorize a two-mind model of design thinking. Mind 1 is about logical design reasoning, and Mind 2 is about the reflection on our reasoning and judgments. The problem solving ability of Mind 1 has often been emphasized in software engineering. The reflective Mind 2, however, has not received much

  13. Designing Visceral, Behavioural and Reflective Products

    Science.gov (United States)

    Aftab, Mersha; Rusli, Helen Agustin

    2017-09-01

    Designers and manufacturers often see consumption as the primary objective of a product - with implications such as discarded products, obsolete wastes, and ecological degradation. The paper aims to find the answer to the question, how emotional design can adapt the discarded and undesirable products into something valuable in a long term? This paper presents a framework combining Chapman's theory and Norman's theory on three levels of emotional design to highlight what long lasting connection with products entails. A design approach is presented combing the Wabi Sabi philosophy that promotes the celebration of decay and damage. This is used as one of the design principles for the experiments conducted on discarded products. Through constant user interaction before, during and after the experiments the evaluation of design as an agent of transformation is done. The user conducted the evaluation based on the Kansei elements of looks, sound, smell, and feel of the product. The experiments confirmed that a long-term value is only achieved through redesigning and reconstructing the perception of people towards products on a reflective level, rather than the visceral and behavioural elements of the product. The research found attachment to the visceral and behavioural elements of a product instead of an emotional one was causing users to discard products faster than required. The research indicated that many people, including designers and manufacturers, are unconsciously focusing on usability (behavioural level) and physical look (visceral level) of a product that are easily replaced, than on a meaningful way (reflective level) to create and maintain long-lasting emotions. The research concluded with a proposition towards digitization of products which could perhaps be an all round solution to make products more appropriate to human emotions. Digitization could give products the ability to capture, store and then communicate the stories, journey and memories back, in

  14. Surface reflectance drives nest box temperature profiles and thermal suitability for target wildlife.

    Directory of Open Access Journals (Sweden)

    Stephen R Griffiths

    Full Text Available Thermal properties of tree hollows play a major role in survival and reproduction of hollow-dependent fauna. Artificial hollows (nest boxes are increasingly being used to supplement the loss of natural hollows; however, the factors that drive nest box thermal profiles have received surprisingly little attention. We investigated how differences in surface reflectance influenced temperature profiles of nest boxes painted three different colors (dark-green, light-green, and white: total solar reflectance 5.9%, 64.4%, and 90.3% respectively using boxes designed for three groups of mammals: insectivorous bats, marsupial gliders and brushtail possums. Across the three different box designs, dark-green (low reflectance boxes experienced the highest average and maximum daytime temperatures, had the greatest magnitude of variation in daytime temperatures within the box, and were consistently substantially warmer than light-green boxes (medium reflectance, white boxes (high reflectance, and ambient air temperatures. Results from biophysical model simulations demonstrated that variation in diurnal temperature profiles generated by painting boxes either high or low reflectance colors could have significant ecophysiological consequences for animals occupying boxes, with animals in dark-green boxes at high risk of acute heat-stress and dehydration during extreme heat events. Conversely in cold weather, our modelling indicated that there are higher cumulative energy costs for mammals, particularly smaller animals, occupying light-green boxes. Given their widespread use as a conservation tool, we suggest that before boxes are installed, consideration should be given to the effect of color on nest box temperature profiles, and the resultant thermal suitability of boxes for wildlife, particularly during extremes in weather. Managers of nest box programs should consider using several different colors and installing boxes across a range of both orientations and

  15. Design It Yourself Surabaya: Reflective Notes on Designing a Festival

    Directory of Open Access Journals (Sweden)

    Kathleen Azali

    2016-08-01

    Full Text Available As a relatively new, imported word, the term desain (design in Indonesian is still mostly understood within its relations to three common academic fields—graphic, interior, and product design—and thus tends to be viewed as belonging to the ‘merely’ visual. While local cultural events and festivals have proliferated in Indonesia, the scope for a conference or a festival that explicitly address design therefore tends to be rather limited. This is not to say that design exhibitions and festivals do not exist. In fact, they have flourished in the country, particularly among university students, reflecting the growth of university design programs and schools to meet contemporary demand. Yet visual-based, market-led development has not been accompanied by institutional development in research and outreach (in the form of dialogues or critical publications, particularly ones that connect that development across different fields. Attaching the word desain to an event in Indonesia invariably means it is associated with either design student exhibitions, or an industrial expo showcasing printers or interior furnitures. This curated piece emerges as our reflection on designing—cobbling up, and calibrating—a design conference-festival from Surabaya, East Java, Indonesia in light of the national context in which desain is received and made meaningful.

  16. Designing a Reflective Teacher Education Course and Its Contribution to ELT Teachers' Reflectivity

    Science.gov (United States)

    Tajik, Leila; Pakzad, Kazem

    2016-01-01

    Researchers in the present study planned a reflective teacher education course and documented the contribution of such a course to improving teachers' reflectivity. Five English teachers took part in the reflective teacher education course designed by the researchers. To record how the course could help improve reflective teaching, researchers…

  17. Improving design processes through structured reflection : a prototype software tool

    OpenAIRE

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype software tool and the design method are developed as part of the Ph.D. project of Isabelle Reymen. The goal of the design method is supporting designers with reflection on design processes in a systemati...

  18. Near zero reflection by nanostructured anti-reflection coating design for Si substrates

    Science.gov (United States)

    Al-Fandi, Mohamed; Makableh, Yahia F.; Khasawneh, Mohammad; Rabady, Rabi

    2018-05-01

    The nanostructure design of near zero reflection coating for Si substrates by using ZnO Nanoneedles (ZnONN) is performed and optimized for the visible spectral range. The design investigates the ZnONN tip to body ratio effect on the anti-reflection coating properties. Different tip to body ratios are used on Si substrates. Around zero reflection is achieved by the Nanoneedles structure design presented in this work, leading to minimal reflection losses from the Si surface. The current design evolves a solution to optical losses and surface contamination effects associated with Si solar cells.

  19. Reflective approach for software design decision making

    NARCIS (Netherlands)

    Razavian, M.; Tang, A.; Capilla, R.; Lago, P.

    2016-01-01

    Good software design practice is difficult to define and teach. Despite the many software design methods and processes that are available, the quality of software design relies on human factors. We notice from literature and our own experiments that some of these factors concern design reasoning and

  20. Reflections on Design-Based Research

    DEFF Research Database (Denmark)

    Ørngreen, Rikke

    2015-01-01

    Design-Based Research is an intervention method that researches educational design (products or processes) in real-life settings with the dual purpose of generating theories about the domain and develop the design iteratively. This paper is an integrative review with a personal ethnographic...... narrative that draws on Design-Based Research literature, and identifies and discusses elements from Interaction Design and Action Research that the Design-Based Research approach could apply, situating the research in online educational projects, where participants are distributed in time and space...

  1. Integration of seismic reflection and geologically balanced profiles; Integration reflexionsseismischer und geologisch bilanzierter Profile

    Energy Technology Data Exchange (ETDEWEB)

    Lambrecht, A. [Trappe Erdoel Erdgas Consultant, Isernhagen (Germany)

    1998-12-31

    Geophysics and geology employ different kinds of techniques in order to preserve the underground structure. These techniques are based on different sets of data, i.e. seismic or geological data. A sensible combination of the two techniques should produce a better model of the ground structure. This study attempts to integrate geologically balanced profiles and seismic reflection data. A balanced geological profile can than be compared with seismic reflection data measured in the field. The geological model is then changed into a seismic model of the underground by means of seismic modeling. Synthetic modeling is based on the acquisition of available field data. The synthetic stack section or the synthetic migration image are then compared to the field data. Deviations between the two can be attributed to speed errors and the fact that balances will never give an unequivocal solution but always present a group of solutions. (orig. MSK). [Deutsch] In der Geophysik und der Geologie werden verschiedene Techniken verwendet, um die Untergrundstruktur zu erhalten. Diese Techniken basieren auf verschiedenen Datensaetzen, z.B. seismische und geologische Daten. Eine sinnvolle Kombination der Techniken sollte ein besseres Abbild des Untergrundes liefern. In dieser Studie wird ein Versuch unternommen geologisch bilanzierte Profile und reflexionsseismische Daten zu integrieren. Soll ein bilanziertes geologisches Profil mit im Feld gemessenen reflexionsseismischen Daten verglichen werden, dann wird das geologische Modell mit Hilfe der seismischen Modellierung in ein seismisches Abbild des Untergrundes verwandelt. Dabei wird die synthetische Modellierung entsprechend der Aquisition der vorliegenden Felddaten durchgefuehrt. Die synthetische Stapelsektion oder das synthetische Migrationsimage werden anschliessend mit den Felddaten verglichen. Abweichungen zwischen beobachteten und Felddaten haben ihre Ursachen sowohl in Geschwindigkeitsfehlern, als auch in der Tatsache, dass eine

  2. Design of control system for profile gauge

    International Nuclear Information System (INIS)

    Huang Yibin; Zhang Yu'ai

    2013-01-01

    The profile gauge can on-line get the cross section in the steel strip, so it has been widely used in hot continuous rolling production-line. The structure of profile gauge and its distributed hardware structure based on PLC and software design of its control subsystem were introduced. The method of temperature and humidity measurement was analyzed. The time response of X-ray machine control based on RS232 communication was researched. It is proved that the control system meets the requirements of the profile gauge system. (authors)

  3. In two minds : how reflections influence software design thinking

    NARCIS (Netherlands)

    Razavian, M.; Tang, A.; Capilla, R.; Lago, P.

    2016-01-01

    We theorize a two-mind model of design thinking. Mind 1 is about logical design reasoning, and Mind 2 is about the reflection on our reasoning and judgments. The problem solving ability of Mind 1 has often been emphasized in software engineering. The reflective Mind 2, however, has not received much

  4. Reflective Subjects in Kant and Architectural Design Education

    Science.gov (United States)

    Rawes, Peg

    2007-01-01

    In architectural design education, students develop drawing, conceptual, and critical skills which are informed by their ability to reflect upon the production of ideas in design processes and in the urban, environmental, social, historical, and cultural context that define architecture and the built environment. Reflective actions and thinking…

  5. Profile reconstruction from neutron reflectivity data and a priori knowledge

    International Nuclear Information System (INIS)

    Leeb, H.

    2008-01-01

    The problem of incomplete and noisy information in profile reconstruction from neutron reflectometry data is considered. In particular methods of Bayesian statistics in combination with modelling or inverse scattering techniques are considered in order to properly include the required a priori knowledge to obtain quantitatively reliable estimates of the reconstructed profiles. Applying Bayes theorem the results of different experiments on the same sample can be consistently included in the profile reconstruction

  6. Learning design: reflections upon the current landscape

    Directory of Open Access Journals (Sweden)

    Brock Craft

    2012-08-01

    Full Text Available The mounting wealth of open and readily available information and the accelerated evolution of social, mobile and creative technologies call for a re-conceptualisation of the role of educators: from providers of knowledge to designers of learning. This call is reverberated by the rising trend of research in learning design (LD. Addressing this, the Art and Science of Learning Design workshop brought together leading voices in the field, and provided a forum for discussing its key issues. It focused on three major themes: (1 practices, methods and methodologies, (2 tools and resources and (3 theoretical frameworks. This paper proposes a definition of LD, reviews the main contributions from the workshop, and suggests some challenges for future research.

  7. Reflecting Indigenous Culture in Educational Software Design.

    Science.gov (United States)

    Fleer, Marilyn

    1989-01-01

    Discusses research on Australian Aboriginal cognition which relates to the development of appropriate educational software. Describes "Tinja," a software program using familiar content and experiences, Aboriginal characters and cultural values, extensive graphics and animation, peer and group work, and open-ended design to help young…

  8. Combined analysis of surface reflection imaging and vertical seismic profiling at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Daley, T.M.; Majer, E.L.; Karageorgi, E.

    1994-08-01

    This report presents results from surface and borehole seismic profiling performed by the Lawrence Berkeley Laboratory (LBL) on Yucca Mountain. This work was performed as part of the site characterization effort for the potential high-level nuclear waste repository. Their objective was to provide seismic imaging from the near surface (200 to 300 ft. depth) to the repository horizon and below, if possible. Among the issues addressed by this seismic imaging work are location and depth of fracturing and faulting, geologic identification of reflecting horizons, and spatial continuity of reflecting horizons. The authors believe their results are generally positive, with tome specific successes. This was the first attempt at this scale using modem seismic imaging techniques to determine geologic features on Yucca Mountain. The principle purpose of this report is to present the interpretation of the seismic reflection section in a geologic context. Three surface reflection profiles were acquired and processed as part of this study. Because of environmental concerns, all three lines were on preexisting roads. Line 1 crossed the mapped surface trace of the Ghost Dance fault and it was intended to study the dip and depth extent of the fault system. Line 2 was acquired along Drill Hole wash and was intended to help the ESF north ramp design activities. Line 3 was acquired along Yucca Crest and was designed to image geologic horizons which were thought to be less faulted along the ridge. Unfortunately, line 3 proved to have poor data quality, in part because of winds, poor field conditions and limited time. Their processing and interpretation efforts were focused on lines 1 and 2 and their associated VSP studies

  9. Improving design processes through structured reflection : a prototype software tool

    NARCIS (Netherlands)

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype

  10. Design of an on-chip reflectance map

    NARCIS (Netherlands)

    Terwisscha van Scheltinga, Jeroen; Smit, Jaap; Bosma, Marco

    1995-01-01

    A reflectance map design is described which uses a minimal amount of memory for the table, in order to be applicable as an on-chip shader. The shader is designed for use with the volumetric super resolution hardware, which performs shading at supersampled locations. However, the design may be used

  11. Reconstruction of fiber grating refractive-index profiles from complex bragg reflection spectra.

    Science.gov (United States)

    Huang, D W; Yang, C C

    1999-07-20

    Reconstruction of the refractive-index profiles of fiber gratings from their complex Bragg reflection spectra is experimentally demonstrated. The amplitude and phase of the complex reflection spectrum were measured with a balanced Michelson interferometer. By integrating the coupled-mode equations, we built the relationship between the complex coupling coefficient and the complex reflection spectrum as an iterative algorithm for reconstructing the index profile. This method is expected to be useful for reconstructing the index profiles of fiber gratings with any apodization, chirp, or dc structures. An apodized chirped grating and a uniform grating with a depression of index modulation were used to demonstrate the technique.

  12. Metabolite profiling of CHO cells: Molecular reflections of bioprocessing effectiveness

    NARCIS (Netherlands)

    Sellick, C.A.; Croxford, A.S.; Maqsood, A.R.; Stephens, G.M.; Westerhoff, H.V.; Goodacre, R.; Dickson, A.J.

    2015-01-01

    Whilst development of medium and feeds has provided major advances in recombinant protein production in CHO cells, the fundamental understanding is limited. We have applied metabolite profiling with established robust (GC-MS) analytics to define the molecular loci by which two yield-enhancing feeds

  13. The Digital Design Process - Reflections on a Single Design Case

    NARCIS (Netherlands)

    Achten, H.H.; Joosen, G.; Dokonal, W.; Hirschberg, U.

    2003-01-01

    CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by

  14. Synchronous E-Learning: Reflections and Design Considerations

    Science.gov (United States)

    Tabak, Filiz; Rampal, Rohit

    2014-01-01

    This paper is a personal reflection on the design, development, and delivery of online synchronous conferencing as a pedagogical tool complementing traditional, face-to-face content delivery and learning. The purpose of the paper is to demonstrate how instructors can combine collaborative and virtual learning principles in course design. In…

  15. Site investigation SFR. Reprocessing of reflection seismic profiles 5b and 8, Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Juhlin, Christopher; Zhang, Fengjiao (Uppsala Univ., Dept. of Earth Sciences (Sweden))

    2010-12-15

    Reflection seismic profiles 5b and 8 in the northern Forsmark area have been reprocessed with the aim of improving the images in the uppermost 500 metres in the SFR area. The main conclusion is that a new reflection (B10) has been identified that may extend below the SFR site. This reflection was not clearly observed in the previous processing. The reflection strikes approximately N25E and dips at about 35 degrees to the southeast. This orientation is similar to the set B group identified earlier /Juhlin and Palm 2005/. Note that the dip of the reflection is uncertain. On shot gathers it appears to dip at a slightly shallower angle while on the stacked sections it appears to dip at a greater angle. This discrepancy is probably due to the crooked nature of the profiles. However, reflections are clearly observed in shot gathers and its presence below SFR is highly probable. Two new reflections were also identified further north along profile 5b (A11 and A12). These dip to the south-southeast, but would be found at a depth of 1-2 km below SFR if they extend to below the site. There are also signs of a 3rd reflection with similar orientation to the set A group identified earlier, A13, but its existence is very speculative. This reflector would intersect the surface within the SFR area. South of the Singoe deformation zone on profile 5b, another new reflection has been found, N1. The orientation of this reflection is speculative since it is not clearly seen on profile 8. It has been modelled as dipping to the north at about 35 degrees and projects to the surface south of the main SFR area. In addition, the orientation of reflection B7 has been revised as has the lateral extent of A1. Most importantly, A1 is now interpreted not to extend to the surface and not cross the Singoe deformation zone

  16. Monitoring structure development in milk acidification using diffuse reflectance profiles

    DEFF Research Database (Denmark)

    Skytte, Jacob Lercke; Andersen, Ulf; Møller, Flemming

    2012-01-01

    are needed so that the production can be carried out consistently, regardless of day-to-day variations in the raw materials. Casein micelles aggregate during milk acidification, which leads to formation of a gel network. This change of structure is important for the development of a range of dairy products......, protein, and temperature in the acidification process is conducted. The purpose of the experiment is to investigate how the change of these parameters affects the diffuse reflectance properties as well as to demonstrate the relation between the optical parameters and structure formation in milk......The structure of dairy products is important for the consumer, and milk acidification plays a central role for structural development. To ensure the best possible consumer experience, it is important that a product’s structural properties are stable. Therefore process and quality control tools...

  17. Reflection: Research by Design: Design-Based Research and the Higher Degree Research Student

    Science.gov (United States)

    Kennedy-Clark, Shannon

    2015-01-01

    The article "Research by design: Design-based research and the higher degree research student" (Kennedy-Clark, 2013) appeared in the "Journal of Learning Design" Volume 6, Issue 2 in 2013. Two years on, Shannon Kennedy-Clark reflects upon her original article. Upon being asked to revisit this article the author reflected upon…

  18. Improving Design Understandings and Skills through Enhanced Metacognition: Reflective Design Journals

    Science.gov (United States)

    Kurt, Mustafa; Kurt, Sevinc

    2017-01-01

    The main aim of this study was to investigate and discover whether going through the process of reflection by keeping reflective design journals (RDJ) enhances architecture students' metacognition and whether this enhanced metacognition improves their design understandings and skills. The study was a mixed-methods design and utilised content…

  19. Harnessing Multiple Internal Reflections to Design Highly Absorptive Acoustic Metasurfaces

    Science.gov (United States)

    Shen, Chen; Cummer, Steven A.

    2018-05-01

    The rapid development of metasurfaces has enabled numerous intriguing applications with acoustically thin sheets. Here we report the theory and experimental realization of a nonresonant sound-absorbing strategy using metasurfaces by harnessing multiple internal reflections. We theoretically and numerically show that the higher-order diffraction of thin gradient-index metasurfaces is tied to multiple internal reflections inside the unit cells. Highly absorbing acoustic metasurfaces can be realized by enforcing multiple internal reflections together with a small amount of loss. A reflective gradient-index acoustic metasurface is designed based on the theory, and we further experimentally verify the performance using a three-dimensional printed prototype. Measurements show over 99% energy absorption at the peak frequency and a 95% energy absorption bandwidth of around 600 Hz. The proposed mechanism provides an alternative route for sound absorption without the necessity of high absorption of the individual unit cells.

  20. A Revised Framingham Stroke Risk Profile to Reflect Temporal Trends

    Science.gov (United States)

    Dufouil, Carole; Beiser, Alexa; McLure, Leslie A.; Wolf, Philip A.; Tzourio, Christophe; Howard, Virginia J; Westwood, Andrew J.; Himali, Jayandra J.; Sullivan, Lisa; Aparicio, Hugo J.; Kelly-Hayes, Margaret; Ritchie, Karen; Kase, Carlos S.; Pikula, Aleksandra; Romero, Jose R.; D’Agostino, Ralph B.; Samieri, Cécilia; Vasan, Ramachandran S.; Chêne, Genevieve; Howard, George; Seshadri, Sudha

    2017-01-01

    Background Age-adjusted stroke incidence has decreased over the past 50 years, likely due to changes in the prevalence and impact of various stroke risk factors. An updated version of the Framingham Stroke Risk Profile (FSRP) might better predict current risks in the Framingham Heart Study (FHS) and other cohorts. We compared the accuracy of the standard (Old), and of a revised (New) version of the FSRP in predicting the risk of all-stroke and ischemic stroke, and validated this new FSRP in two external cohorts, the 3 Cities (3C) and REGARDS studies. Methods We computed the old FSRP as originally described, and a new model that used the most recent epoch-specific risk factors' prevalence and hazard-ratios for persons ≥ 55 years and for the subsample ≥ 65 years (to match the age range in REGARDS and 3C studies respectively), and compared the efficacy of these models in predicting 5- and 10-year stroke risks. Results The new FSRP was a better predictor of current stroke risks in all three samples than the old FSRP (Calibration chi-squares of new/old FSRP: in men 64.0/12.1, 59.4/30.6 and 20.7/12.5; in women 42.5/4.1, 115.4/90.3 and 9.8/6.5 in FHS, REGARDS and 3C, respectively). In the REGARDS, the new FSRP was a better predictor among whites compared to blacks. Conclusions A more contemporaneous, new FSRP better predicts current risks in 3 large community samples and could serve as the basis for examining geographic and racial differences in stroke risk and the incremental diagnostic utility of novel stroke risk factors. PMID:28159800

  1. Revised Framingham Stroke Risk Profile to Reflect Temporal Trends.

    Science.gov (United States)

    Dufouil, Carole; Beiser, Alexa; McLure, Leslie A; Wolf, Philip A; Tzourio, Christophe; Howard, Virginia J; Westwood, Andrew J; Himali, Jayandra J; Sullivan, Lisa; Aparicio, Hugo J; Kelly-Hayes, Margaret; Ritchie, Karen; Kase, Carlos S; Pikula, Aleksandra; Romero, Jose R; D'Agostino, Ralph B; Samieri, Cécilia; Vasan, Ramachandran S; Chêne, Genevieve; Howard, George; Seshadri, Sudha

    2017-03-21

    Age-adjusted stroke incidence has decreased over the past 50 years, likely as a result of changes in the prevalence and impact of various stroke risk factors. An updated version of the Framingham Stroke Risk Profile (FSRP) might better predict current risks in the FHS (Framingham Heart Study) and other cohorts. We compared the accuracy of the standard (old) and of a revised (new) version of the FSRP in predicting the risk of all-stroke and ischemic stroke and validated this new FSRP in 2 external cohorts, the 3C (3 Cities) and REGARDS (Reasons for Geographic and Racial Differences in Stroke) studies. We computed the old FSRP as originally described and a new model that used the most recent epoch-specific risk factor prevalence and hazard ratios for individuals ≥55 years of age and for the subsample ≥65 years of age (to match the age range in REGARDS and 3C studies, respectively) and compared the efficacy of these models in predicting 5- and 10-year stroke risks. The new FSRP was a better predictor of current stroke risks in all 3 samples than the old FSRP (calibration χ 2 of new/old FSRP: in men: 64.0/12.1, 59.4/30.6, and 20.7/12.5; in women: 42.5/4.1, 115.4/90.3, and 9.8/6.5 in FHS, REGARDS, and 3C, respectively). In the REGARDS, the new FSRP was a better predictor among whites compared with blacks. A more contemporaneous, new FSRP better predicts current risks in 3 large community samples and could serve as the basis for examining geographic and racial differences in stroke risk and the incremental diagnostic utility of novel stroke risk factors. © 2017 American Heart Association, Inc.

  2. Design Research and Practice for the Public Good: A Reflection

    Directory of Open Access Journals (Sweden)

    Sabine Junginger

    Full Text Available Public sector managers and policymakers have begun to work with design researchers and design practitioners in an effort to create citizen-centric polices and user-centered public services. What role can design play in the approach taken by the public sector in organizational development and innovation? This paper reflects on an innovation project at a Brazilian Ministry where human-centered design was chosen as an approach to integrate innovation efforts among different government agencies and ministries. It offers an example of how human-centered design approaches can support efforts by civil servants to change their own design practices. Keywords: Design research, Design practice, Public sector, Civil servants, Organizational change & development

  3. Analysis of the profile characteristics of corn and soybeans using field reflectance data

    Science.gov (United States)

    Crist, E. P.

    1982-01-01

    The typical patterns of spectral development (profiles) for corn and soybeans are presented, based on field-collected reflectance data transformed to correspond to LANDSAT-MSS Tasseled Cap coordinates. Reasonable variations in field conditions and cultural practices are shown to significantly influence profile features. The separability of the two crops is determined to be primarily related to the maximum value of the reflectance equivalent of Greenness, and to the plateau effect seen in corn Greenness profiles. The impact of changes in conditions on separability is described. In addition, association is made between profile features and stages of development for corn and soybeans. Corn is shown to peak at a stage well before tasseling or maximum LAI, while the characteristics of the soybean profile are shown to be unrelated to any particular stage of development.

  4. Designers and Stakeholders Defining Design Opportunities "In-Situ" through Co-reflection

    NARCIS (Netherlands)

    Tomico, O.; Garcia, I.; Buur, J.

    2011-01-01

    this article proposes co-reflection as a workshop to situate design practice in its context of application and presents a case study done at the eLearn Center of the Open University of Catalonia. Co-reflection is a re!ective practice. In the half-aday workshop developed, co-reflection was

  5. Design issues for block-oriented reflective memory system

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, M; Tomasevic, M; Milutinovic, V

    1996-12-31

    The block-oriented reflective memory (BORM) system represents a modular bus-based system architecture that belongs to the class of distributed shared memory systems. The results of the evaluation study of the BORM implementation strategies and design decisions in regard to the different values of input parameters are presented. 5 refs.

  6. Ab initio study of intrinsic profiles of liquid metals and their reflectivity

    Science.gov (United States)

    del Rio, B. G.; Souto, J.; Alemany, M. M. G.; González, L. E.

    2017-08-01

    The free surfaces of liquid metals are known to exhibit a stratified profile that, in favourable cases, shows up in experiments as a peak in the ratio between the reflectivity function and that of an ideal step-like profile. This peak is located at a wave-vector related to the distance between the layers of the profile. In fact the surface roughness produced by thermally induced capillary waves causes a depletion of the previous so called intrinsic reflectivity by a damping factor that may hinder the observation of the peak. The behaviour of the intrinsic reflectivity below the layering peak is however far from being universal, with systems as Ga or In where the reflectiviy falls uniformly towards the q → 0 value, others like Sn or Bi where a shoulder appears at intermediate wavevectors, and others like Hg which show a minimum. We have performed extensive ab initio simulations of the free liquid surfaces of Bi, Pb and Hg, that yield direct information on the structure of the profiles and found that the macroscopic capillary wave theory usually employed in order to remove the capillary wave components fails badly in some cases for the typical sample sizes affordable in ab initio simulations. However, a microscopic method for the determination of the intrinsic profile is shown to be succesful in obtaining meaningful intrinsic profiles and corresponding reflectivities which reproduce correctly the qualitative behaviour observed experimentally.

  7. Designing museum exhibits that facilitate visitor reflection and discussion

    DEFF Research Database (Denmark)

    Skydsgaard, Morten Arnika; Andersen, Hanne Møller; King, Heather

    2016-01-01

    This paper explores how four design principles (curiosity, challenge, narratives and participation) facilitate reflection and discussion among young visitors in the issues-based exhibition Dear, Difficult Body. The investigation is based on a mixed-method approach combining questionnaire and inte......This paper explores how four design principles (curiosity, challenge, narratives and participation) facilitate reflection and discussion among young visitors in the issues-based exhibition Dear, Difficult Body. The investigation is based on a mixed-method approach combining questionnaire...... and interview data. The implementation of design principles resulted in a variety of exhibits which variously prompted reflection and discussion on the part of visitors. Exhibits with narratives, for example, here defined as both personal and expert narratives, were found to be effective in facilitating...... personal reflection but also prompted discussion. Participation, defined as including both physical interaction with exhibits, and dialogic interaction between visitors, facilitated the sharing of ideas and feelings between visitors. Exhibits with elements of curiosity and challenge were found to attract...

  8. Evidence of the influence of reflections on the Zeff profile measurements and their mitigation

    International Nuclear Information System (INIS)

    Schunke, B.; Huysmans, G.; Thomas, P.

    2004-01-01

    There is a significant interest in the reconstruction of the mean effective charge (Zeff) profile to assess the control of the plasma impurities. On Tore-Supra a modified Abel inversion of the visible Bremsstrahlung allows the calculation of the Zeff profile. Although the total number of viewing lines of the Bremsstrahlung diagnostic is small, the method gives acceptable accuracy due to the high poloidal symmetry (circularity) of the Tore-Supra plasma. It has been noticed that the outer channels were often over-estimated, giving unphysical high Zeff at the edge of 20 or more. An experimental set-up using dedicated discharges has showed that reflections on the vacuum vessel wall are responsible for the additional signal component. It was attempted to model the impact of these reflections on the calculated profile but it appeared that the choice of the model depends strongly on the accurate value of the reflection coefficient of the vacuum wall of Tore-Supra

  9. Evidence of the influence of reflections on the Zeff profile measurements and their mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Schunke, B.; Huysmans, G.; Thomas, P

    2004-07-01

    There is a significant interest in the reconstruction of the mean effective charge (Zeff) profile to assess the control of the plasma impurities. On Tore-Supra a modified Abel inversion of the visible Bremsstrahlung allows the calculation of the Zeff profile. Although the total number of viewing lines of the Bremsstrahlung diagnostic is small, the method gives acceptable accuracy due to the high poloidal symmetry (circularity) of the Tore-Supra plasma. It has been noticed that the outer channels were often over-estimated, giving unphysical high Zeff at the edge of 20 or more. An experimental set-up using dedicated discharges has showed that reflections on the vacuum vessel wall are responsible for the additional signal component. It was attempted to model the impact of these reflections on the calculated profile but it appeared that the choice of the model depends strongly on the accurate value of the reflection coefficient of the vacuum wall of Tore-Supra.

  10. Design of Reflective, Photonic Shields for Atmospheric Reentry

    Science.gov (United States)

    Komarevskiy, Nikolay; Shklover, Valery; Braginsky, Leonid; Hafner, Christian; Fabrichnaya, Olga; White, Susan; Lawson, John

    2010-01-01

    We present the design of one-dimensional photonic crystal structures, which can be used as omnidirectional reflecting shields against radiative heating of space vehicles entering the Earth's atmosphere. This radiation is approximated by two broad bands centered at visible and near-infrared energies. We applied two approaches to find structures with the best omnidirectional reflecting performance. The first approach is based on a band gap analysis and leads to structures composed of stacked Bragg mirrors. In the second approach, we optimize the structure using an evolutionary strategy. The suggested structures are compared with a simple design of two stacked Bragg mirrors. Choice of the constituent materials for the layers as well as the influence of interlayer diffusion at high temperatures are discussed.

  11. Crustal structure in the Kiruna area, northern Sweden, based on seismic reflection profiling

    Science.gov (United States)

    Juhojuntti, Niklas; Bergman, Stefan; Olsson, Sverker

    2013-04-01

    Northernmost Sweden is currently one of the most active mining areas in Europe. In order to better understand the regional three-dimensional crustal structure and to support deep ore exploration, we have acquired a 74 km long seismic reflection profile in the Kiruna area. The upper crust in this area is largely composed of various supracrustal units, which are dominated by metabasalts, acidic metavolcanics and clastic metasedimentary rocks, resting on an Archaean metagranitoid complex. All of these units have been intruded by plutonic rocks, and to variable degrees folded, sheared and metamorphosed, during the Svecokarelian orogeny. The profile crosses several steep ductile shear zones, some of which extend for hundreds of kilometres along strike. Many of the lithological contacts and deformation zones are expected to be seismically reflective. The profile is located only a few kilometres from the world's largest underground iron-ore mine in Kiruna, and closer to the profile there are several known ore bodies, some of which are active exploration targets. For the seismic recording we used approximately 350 geophones in split-spread configuration, at a separation of 25 m. The main seismic source was the Vibsist system (an impact source), which normally was employed at every geophone station. We also fired explosive charges (8-16 kg) at a few locations distributed along the profile to image deeper structures, although at very low resolution. Wireless seismometers were placed along and to the side of the profile, mainly in order to achieve better velocity control and to study out-of-the-plane reflections. Some mining blasts in Kiruna were also recorded. The upper crust in the area is quite reflective, most clearly demonstrated by the dynamite shot records. Some of the reflections appear to originate from steeply dipping structures. The dynamite shot records show a set of reflections at 3-4 s twt, corresponding to a depth of roughly 10 km, the explanation for which is

  12. Design and Analysis of Underwater Acoustic Networks with Reflected Links

    Science.gov (United States)

    Emokpae, Lloyd

    Underwater acoustic networks (UWANs) have applications in environmental state monitoring, oceanic profile measurements, leak detection in oil fields, distributed surveillance, and navigation. For these applications, sets of nodes are employed to collaboratively monitor an area of interest and track certain events or phenomena. In addition, it is common to find autonomous underwater vehicles (AUVs) acting as mobile sensor nodes that perform search-and-rescue missions, reconnaissance in combat zones, and coastal patrol. These AUVs are to work cooperatively to achieve a desired goal and thus need to be able to, in an ad-hoc manner, establish and sustain communication links in order to ensure some desired level of quality of service. Therefore, each node is required to adapt to environmental changes and be able to overcome broken communication links caused by external noise affecting the communication channel due to node mobility. In addition, since radio waves are quickly absorbed in the water medium, it is common for most underwater applications to rely on acoustic (or sound) rather than radio channels for mid-to-long range communications. However, acoustic channels pose multiple challenging issues, most notably the high transmission delay due to slow signal propagation and the limited channel bandwidth due to high frequency attenuation. Moreover, the inhomogeneous property of the water medium affects the sound speed profile while the signal surface and bottom reflections leads to multipath effects. In this dissertation, we address these networking challenges by developing protocols that take into consideration the underwater physical layer dynamics. We begin by introducing a novel surface-based reflection scheme (SBR), which takes advantage of the multipath effects of the acoustic channel. SBR works by using reflections from the water surface, and bottom, to establish non-line-of-sight (NLOS) communication links. SBR makes it possible to incorporate both line

  13. Observability of plant metabolic networks is reflected in the correlation of metabolic profiles

    DEFF Research Database (Denmark)

    Schwahn, Kevin; Küken, Anika; Kliebenstein, Daniel James

    2016-01-01

    to obtain information about the entire system. Yet, the extent to which the data profiles reflect the role of components in the observability of the system remains unexplored. Here we first identify the sensor metabolites in the model plant Arabidopsis (Arabidopsis thaliana) by employing state...... with in silico generated metabolic profiles from a medium-size kinetic model of plant central carbon metabolism. Altogether, due to the small number of identified sensors, our study implies that targeted metabolite analyses may provide the vast majority of relevant information about plant metabolic systems....

  14. From Intensity Profile to Surface Normal: Photometric Stereo for Unknown Light Sources and Isotropic Reflectances.

    Science.gov (United States)

    Lu, Feng; Matsushita, Yasuyuki; Sato, Imari; Okabe, Takahiro; Sato, Yoichi

    2015-10-01

    We propose an uncalibrated photometric stereo method that works with general and unknown isotropic reflectances. Our method uses a pixel intensity profile, which is a sequence of radiance intensities recorded at a pixel under unknown varying directional illumination. We show that for general isotropic materials and uniformly distributed light directions, the geodesic distance between intensity profiles is linearly related to the angular difference of their corresponding surface normals, and that the intensity distribution of the intensity profile reveals reflectance properties. Based on these observations, we develop two methods for surface normal estimation; one for a general setting that uses only the recorded intensity profiles, the other for the case where a BRDF database is available while the exact BRDF of the target scene is still unknown. Quantitative and qualitative evaluations are conducted using both synthetic and real-world scenes, which show the state-of-the-art accuracy of smaller than 10 degree without using reference data and 5 degree with reference data for all 100 materials in MERL database.

  15. Design of Softgauge for Surface Profile Evaluation

    International Nuclear Information System (INIS)

    Nie, M Q; Liu, X J; Jiang, X Q

    2006-01-01

    A concept of softgauge has been proposed by ISO in the context of surface texture measurement, in which reference software and reference data are included. In this paper, an effective scheme to build reference software for 2D surface profile measurement is proposed. The advantage of the scheme lies in its effective combination of high numerical calculating capability of MATLAB with perfect interface programming capability of VC. Preliminary reference software is developed, and typical algorithms are tested

  16. A Standardized Narrative Profile Approach to Self-Reflection and Assessment of Cross-Cultural Communication

    Directory of Open Access Journals (Sweden)

    Kyle J Wilby

    2017-03-01

    Full Text Available Objectives: 1 to explore clinical assessor’s values regarding behaviours related to cultural aspects of care, 2 to generate standardized narrative profiles regarding cultural behavioural outcomes within clinical teaching settings, and 3 to rank order standardized narrative profiles according to performance expectations. Methods: Ten interviews were completed with clinicians to determine values and performance expectations for culturally competent behaviours. Transcripts were produced and coded. Six narrative profiles were developed based on data obtained. Twenty clinicians categorized profiles according to performance expectations and rank ordered. Intraclass correlation coefficients (ICCs determined inter-rater reliability. Clinicians rated usability of profiles in clinical training settings. Results: Eighteen categories were coded with communication, awareness and ability most frequently reported with each ranging from 9.6-11.5% of the utterances. Consensus for categorization of all profiles was achieved at a level of 70% (ICC = 0.837, 95% CI 0.654-0.969. High inter-rater reliability was achieved for rank ordering (ICC = 0.815, 95% CI 0.561 to 0.984. Seventeen (85% clinicians agreed that the profiles would be usable in clinical training settings. Conclusions: Standardized narrative profiles may aid assessment and self-reflection for student performance within culturally diverse interactions. Conflict of Interest We declare no conflicts of interest or financial interests that the authors or members of their immediate families have in any product or service discussed in the manuscript, including grants (pending or received, employment, gifts, stock holdings or options, honoraria, consultancies, expert testimony, patents and royalties.   Type: Original Research

  17. The ReflecTable: Bridging the Gap between Theory and Practice in Design Education

    DEFF Research Database (Denmark)

    Hook, Jonathan; Hjermitslev, Thomas; Iversen, Ole Sejer

    The ReflecTable is a digital learning environment that explores how design games and video-led reflection might be combined to bridge the gap between the theoretical and practical components of design education. The concept seeks to leverage the qualities of exploratory design games and video...... to inspire design students to critically reflect upon the relationship between their evolving design practices and the theories and techniques they are taught in lectures, by allowing them to capture, review and reflect upon short videos of a design game. In this paper, we present the ReflecTable design...

  18. Improving the Automatic Inversion of Digital ISIS-2 Ionogram Reflection Traces into Topside Vertical Electron-Density Profiles

    Science.gov (United States)

    Benson, R. F.; Truhlik, V.; Huang, X.; Wang, Y.; Bilitza, D.

    2011-01-01

    The topside-sounders on the four satellites of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35-mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the TOPside Ionogram Scalar with True-height (TOPIST) algorithm has been produced that enables the automatic inversion of ISIS-2 ionogram reflection traces into topside vertical electron-density profiles Ne(h). More than million digital Alouette/ISIS topside ionograms have been produced and over 300,000 are from ISIS 2. Many of these ISIS-2 ionograms correspond to a passive mode of operation for the detection of natural radio emissions and thus do not contain ionospheric reflection traces. TOPIST, however, is not able to produce Ne(h) profiles from all of the ISIS-2 ionograms with reflection traces because some of them did not contain frequency information. This information was missing due to difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame-sync pulse and/or the frequency markers. Of the many digital topside ionograms that TOPIST was able to process, over 200 were found where direct comparisons could be made with Ne(h) profiles that were produced by manual scaling in the early days of the ISIS program. While many of these comparisons indicated excellent agreement (inversion process: (1) improve the quality of the digital ionogram database by remedying the missing frequency-information problem when possible, and (2) using the above-mentioned comparisons as teaching examples of how to improve the original TOPIST software.

  19. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to

  20. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to

  1. Experimental analysis of bruises in human volunteers using radiometric depth profiling and diffuse reflectance spectroscopy

    Science.gov (United States)

    Vidovič, Luka; Milanič, Matija; Majaron, Boris

    2015-07-01

    We combine pulsed photothermal radiometry (PPTR) depth profiling with diffuse reflectance spectroscopy (DRS) measurements for a comprehensive analysis of bruise evolution in vivo. While PPTR enables extraction of detailed depth distribution and concentration profiles of selected absorbers (e.g. melanin, hemoglobin), DRS provides information in a wide range of visible wavelengths and thus offers an additional insight into dynamics of the hemoglobin degradation products. Combining the two approaches enables us to quantitatively characterize bruise evolution dynamics. Our results indicate temporal variations of the bruise evolution parameters in the course of bruise self-healing process. The obtained parameter values and trends represent a basis for a future development of an objective technique for bruise age determination.

  2. Seismic reflection profile of the Blake Ridge near sites 994, 995, and 997: Chapter 4

    Science.gov (United States)

    Dillon, William P.; Hutchinson, Deborah R.; Drury, Rebecca M.

    1996-01-01

    Seismic reflection profiles near Sites 994, 995, and 997 were collected with seismic sources that provide maximum resolution with adequate power to image the zone of gas hydrate stability and the region direction beneath it. The overall structure of the sediment drift deposit that constitutes the Blake Ridge consists of southwestward-dipping strata. These strata are approximately conformal to the seafloor on the southwest side of the ridge and are truncated by erosion on the northeast side. A bottom-simulating reflection (BSR) marks the velocity contrast between gas hydrate-bearing sediment and regions containing free gas beneath the zone of gas hydrate stability. The BSR is strong and continuous near the ridge crest but becomes discontinuous on the flanks, where concentration of gas is reduced and dipping strata pass through the level of the base o fgas hydrate stability or the strata are disrupted by faults. Seismic reflection amplitudes appear to be reduced in the region of gas hydrate formation compared to normal amplitudes. A faulted zone ~0.5-0.6 s thick parallels reflections from strata. We infer that this may represent a formerly gas hydrate-bearing zone that was faulted because of a breakdown of hydrate near its phase limit (at the base of the zone). Strong reflections at the top of the faulted zone are caused by free-gas acccumulation at Site 994. Similar strong reflections probably are caused by free-gas accumulations where the top of the faulted zone rises above the BSR, although this would require local free gas within the hydrate-stable zone.

  3. Crustal structure of the North Iberian continental margin from seismic refraction/wide-angle reflection profiles

    Science.gov (United States)

    Ruiz, M.; Díaz, J.; Pedreira, D.; Gallart, J.; Pulgar, J. A.

    2017-10-01

    The structure and geodynamics of the southern margin of the Bay of Biscay have been investigated from a set of 11 multichannel seismic reflection profiles, recorded also at wide angle offsets in an onshore-offshore network of 24 OBS/OBH and 46 land sites. This contribution focuses on the analysis of the wide-angle reflection/refraction data along representative profiles. The results document strong lateral variations of the crustal structure along the margin and provide an extensive test of the crustal models previously proposed for the northern part of the Iberian Peninsula. Offshore, the crust has a typical continental structure in the eastern tip of the bay, which disappears smoothly towards the NW to reach crustal thickness close to 10 km at the edge of the studied area ( 45°N, 6°W). The analysis of the velocity-depth profiles, altogether with additional information provided by the multichannel seismic data and magnetic surveys, led to the conclusion that the crust in this part of the bay should be interpreted as transitional from continental to oceanic. Typical oceanic crust has not been imaged in the investigated area. Onshore, the new results are in good agreement with previous results and document the indentation of the Bay of Biscay crust into the Iberian crust, forcing its subduction to the North. The interpreted profiles show that the extent of the southward indentation is not uniform, with an Alpine root less developed in the central and western sector of the Basque-Cantabrian Basin. N-S to NE-SW transfer structures seem to control those variations in the indentation degree.

  4. Simultaneous Determination of Source Wavelet and Velocity Profile Using Impulsive Point-Source Reflections from a Layered Fluid

    National Research Council Canada - National Science Library

    Bube, K; Lailly, P; Sacks, P; Santosa, F; Symes, W. W

    1987-01-01

    .... We show that a quasi-impulsive, isotropic point source may be recovered simultaneously with the velocity profile from reflection data over a layered fluid, in linear (perturbation) approximation...

  5. Improving the Automatic Inversion of Digital Alouette/ISIS Ionogram Reflection Traces into Topside Electron Density Profiles

    Science.gov (United States)

    Benson, Robert F.; Truhlik, Vladimir; Huang, Xueqin; Wang, Yongli; Bilitza, Dieter

    2012-01-01

    The topside sounders of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35 mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the Topside Ionogram Scalar With True-Height (TOPIST) algorithm, has been produced and used for the automatic inversion of the ionogram reflection traces on more than 100,000 ISIS-2 digital topside ionograms into topside vertical electron density profiles Ne(h). Here we present some topside ionospheric solar cycle variations deduced from the TOPIST database to illustrate the scientific benefit of improving and expanding the topside ionospheric Ne(h) database. The profile improvements will be based on improvements in the TOPIST software motivated by direct comparisons between TOPIST profiles and profiles produced by manual scaling in the early days of the ISIS program. The database expansion will be based on new software designed to overcome limitations in the original digital topside ionogram database caused by difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame sync pulse and/or the frequency markers. This improved and expanded TOPIST topside Ne(h) database will greatly enhance investigations into both short- and long-term ionospheric changes, e.g., the observed topside ionospheric responses to magnetic storms, induced by interplanetary magnetic clouds, and solar cycle variations, respectively.

  6. The Potential of Design in a Sustainable Engineering Profile

    DEFF Research Database (Denmark)

    Petersen, Rikke Premer

    2013-01-01

    Sustainability is still a relatively new term in everyday public discourses, yet broad consensus is emerging that issues of sustainability should take a central part in future development strategies. Some of the professions most seriously effected by the complexities and challenges of sustainable...... approach to problem solving across professions. In other words, how a reflected design practice makes it possible to deal with issues of sustainability....... concept, but its use has always been fluent and changing. Today it is no longer solely a matter of formalist aesthetics employing materials and tangible form for iconic recognition. The design field is rather shifting towards a reflective, creative practice working across disciplines and professions......, and the objects of design are shifting towards systems, services, and experiences rather than material products. Illustrated by two concrete engineering programs I will argue that a reflected design practice makes it possible to deal with open, complex challenges, and that it enables a more contextually situated...

  7. Assessing Reflective Thinking in Solving Design Problems: The Development of a Questionnaire

    Science.gov (United States)

    Hong, Yi-Chun; Choi, Ikseon

    2015-01-01

    Reflection is a critical factor in solving design problems. Using good methods to observe designers' reflection is essential to inform the design of the learning environments that support the development of design problem-solving skills. In this study, we have developed and validated a novel self-reporting questionnaire as an efficient instrument…

  8. Oxaliplatin loaded PLAGA microspheres: design of specific release profiles.

    Science.gov (United States)

    Lagarce, F; Cruaud, O; Deuschel, C; Bayssas, M; Griffon-Etienne, G; Benoit, J

    2002-08-21

    Oxaliplatin loaded PLAGA microspheres have been prepared by solvent extraction process. Parameters affecting the release kinetics in vitro have been studied in order to design specific release profiles suitable for direct intra-tumoral injection. By varying the nature and the relative proportions of different polymers we managed to prepare microspheres with good encapsulation efficiency (75-90%) and four different release profiles: zero order kinetics (type II) and the classical sigmoïd release profile with three different sizes of plateau and burst. These results, if correlated with in vivo activity, are promising to enhance effectiveness of local tumor treatment.

  9. Altering participation through interactions and reflections in design

    CSIR Research Space (South Africa)

    Winschiers-Theophilus, H

    2012-06-01

    Full Text Available In this paper, we illustrate through a set of examples how our own conceptualisation of participatory design (PD) and associated tools and techniques transforms within the design process itself. Co-designing with African rural communities has...

  10. Innovative design method of automobile profile based on Fourier descriptor

    Science.gov (United States)

    Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

    2017-10-01

    Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

  11. Reflection and Professional Identity Development in Design Education

    Science.gov (United States)

    Tracey, Monica W.; Hutchinson, Alisa

    2018-01-01

    Design thinking positions designers as the drivers of the design space yet academic discourse is largely silent on the topic of professional identity development in design. Professional identity, or the dynamic narratives that individuals construct and maintain to integrate their personal qualities with professional responsibilities, has not been…

  12. Reflections

    Directory of Open Access Journals (Sweden)

    Joanne Embree

    2001-01-01

    Full Text Available Ideally, editorials are written one to two months before publication in the Journal. It was my turn to write this one. I had planned to write the first draft the evening after my clinic on Tuesday, September 11. It didn't get done that night or during the next week. Somehow, the topic that I had originally chosen just didn't seem that important anymore as I, along my friends and colleagues, reflected on the changes that the events of that day were likely to have on our lives.

  13. Diffraction efficiency of radially-profiled off-plane reflection gratings

    Science.gov (United States)

    Miles, Drew M.; Tutt, James H.; DeRoo, Casey T.; Marlowe, Hannah; Peterson, Thomas J.; McEntaffer, Randall L.; Menz, Benedikt; Burwitz, Vadim; Hartner, Gisela; Laubis, Christian; Scholze, Frank

    2015-09-01

    Future X-ray missions will require gratings with high throughput and high spectral resolution. Blazed off-plane reflection gratings are capable of meeting these demands. A blazed grating profile optimizes grating efficiency, providing higher throughput to one side of zero-order on the arc of diffraction. This paper presents efficiency measurements made in the 0.3 - 1.5 keV energy band at the Physikalisch-Technische Bundesanstalt (PTB) BESSY II facility for three holographically-ruled gratings, two of which are blazed. Each blazed grating was tested in both the Littrow configuration and anti-Littrow configuration in order to test the alignment sensitivity of these gratings with regard to throughput. This paper outlines the procedure of the grating experiment performed at BESSY II and discuss the resulting efficiency measurements across various energies. Experimental results are generally consistent with theory and demonstrate that the blaze does increase throughput to one side of zero-order. However, the total efficiency of the non-blazed, sinusoidal grating is greater than that of the blazed gratings, which suggests that the method of manufacturing these blazed profiles fails to produce facets with the desired level of precision. Finally, evidence of a successful blaze implementation from first diffraction results of prototype blazed gratings produce via a new fabrication technique at the University of Iowa are presented.

  14. Total reflection X-ray Fluorescence determination of interfering elements rubidium and uranium by profile fitting

    Science.gov (United States)

    Dhara, Sangita; Khooha, Ajay; Singh, Ajit Kumar; Tiwari, M. K.; Misra, N. L.

    2018-06-01

    Systematic studies to assess the analytical parameters obtained in the total reflection X-ray fluorescence (TXRF) determinations of interfering elements Rb and U using profile fitting are reported in the present manuscript. The X-ray lines Rb Kα and U Lα having serious spectral interference (ΔE = 218 eV), have been used as analytical lines. The intensities of these X-ray lines have been assessed using profile fitting. In order to compare the analytical results of Rb determinations in presence of U, with and without U excitation, synchrotron radiation was tuned to energy just above and below the U Labs edge. This approach shall excite both Rb Kα and U Lα simultaneously and Rb Kα selectively. Finally, the samples were also analyzed with a laboratory based TXRF spectrometer. The analytical results obtained in all these conditions were comparable. The authenticity of the results was assessed by analyzing U with respect to Rb in Rb2U(SO4)3, a standard reference material for U. The average precision obtained for TXRF determinations was below 3% (RSD, n = 3, 1σ) and the percent deviation of TXRF values from the expected values calculated on the basis of sample preparation was within 3%.

  15. Interpretation of shallow crustal structure of the Imperial Valley, California, from seismic reflection profiles

    Energy Technology Data Exchange (ETDEWEB)

    Severson, L.K.

    1987-05-01

    Eight seismic reflection profiles (285 km total length) from the Imperial Valley, California, were provided to CALCRUST for reprocessing and interpretation. Two profiles were located along the western margin of the valley, five profiles were situated along the eastern margin and one traversed the deepest portion of the basin. These data reveal that the central basin contains a wedge of highly faulted sediments that thins to the east. Most of the faulting is strike-slip but there is evidence for block rotations on the scale of 5 to 10 kilometers within the Brawley Seismic Zone. These lines provide insight into the nature of the east and west edges of the Imperial Valley. The basement at the northwestern margin of the valley, to the north of the Superstition Hills, has been normal-faulted and blocks of basement material have ''calved'' into the trough. A blanket of sediments has been deposited on this margin. To the south of the Superstition Hills and Superstition Mountain, the top of the basement is a detachment surface that dips gently into the basin. This margin is also covered by a thick sequence sediments. The basement of the eastern margin consists of metamorphic rocks of the upper plate of the Chocolate Mountain Thrust system underlain by the Orocopia Schist. These rocks dip to the southeast and extend westward to the Sand Hills Fault but do not appear to cross it. Thus, the Sand Hills Fault is interpreted to be the southern extension of the San Andreas Fault. North of the Sand Hills Fault the East Highline Canal seismicity lineament is associated with a strike-slip fault and is probably linked to the Sand Hills Fault. Six geothermal areas crossed by these lines, in agreement with previous studies of geothermal reservoirs, are associated with ''faded'' zones, Bouguer gravity and heat flow maxima, and with higher seismic velocities than surrounding terranes.

  16. The polarized neutron reflectivity and X-ray reflectivity studies of the magnetic profiles of epitaxial Ni80Fe20/Ru multilayers

    International Nuclear Information System (INIS)

    Su, H.-C.; Peir, J.-J.; Lee, C.-H.; Lin, M.-Z.; Wu, P.-T.; Huang, J.C.A.; Tun Zin

    2005-01-01

    The depth profiles of the epitaxial Ni 80 Fe 20 (1 1 1)/Ru(0 0 0 1) multilayers were studied by polarized neutron reflectivity and X-ray reflectivity. At the Ru thickness that the anti-ferromagnetic coupling was found, the magnetic moments between two Ni 80 Fe 20 interlayers show a biquadratic coupling effect with a double unit cell at low applied fields. A magnetic dead layer of about 0.3 nm was also found at the interface boundaries. The maximal polarization effect applied to the Ru layer is less than 0.03μ B

  17. Process weakness assessment by profiling all incoming design components

    Science.gov (United States)

    Zhuang, Linda; Cai, MengFeng; Zhu, Annie; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

    2017-03-01

    Foundries normally receive a large number of designs from different customers every day. It is desired to automatically profile each incoming design to quantify certain metrics like 1) the number of polygons per GDS layers 2) what kind of electrical components the design contains 3) what the dimensions of each electrical component are 4) how frequently any size of components have been used and their physical locations. This paper will present a novel method of how to generate a complete profile of components for any particular design. The component checking flow need to be completed within hours so it will have very little impact on the tape-out time. A pre-layer checking method is also run to group commonly used layers for different electrical components and then employ different layout profiling flows. The foundry does this design chip analysis in order to find potentially weak devices due to their size or special size requirements for particular electrical components. The foundry can then take pre-emptive action to avoid yield loss or make an unnecessary mask for new incoming products before fab processing starts.

  18. Seismarmara experiment: results from reprocessing of selected multi-channel seismic reflection profiles

    Science.gov (United States)

    Cetin, S.; Voogd, B.; Carton, H.; Laigle, M.; Becel, A.; Saatcilar, R.; Singh, S.; Hirn, A.

    2003-04-01

    The North Anatolian Fault (NAF) has been responsible for the earthquakes of Izmit and Duzce in 1999. The occurrence of these earthquakes has drawn scientific attention into the Sea of Marmara since the NAF enters into the Sea of Marmara where the latest Izmit earthquake rupture stopped. The SEISMARMARA-2001 survey is a combined seismic reflection, refraction and earthquake experiment carried out in 2001 in the Marmara Region in Turkey by French-Turkish scientific cooperation. The objectives of this survey were to image the various branches of the NAF and related other fault systems. R/V Le Nadir was equipped with a 4.5 km long streamer with 360 channels and a large airgun source. During Leg 1, a grid of large regional lines encompassing the whole Marmara trough was shot. For part of them a strong 8100 cu.in. source for deepest penetration was used, with a 150 m shot interval giving a 15-fold coverage. Another part was shot for a higher resolution with a 2900 cu. in. array at a 50m or 38 m interval to give a 45 or 60-fold coverage. The latter acquisition parameters were used for Leg 2 that was devoted to a very dense grid of lines in the Cinarcik Basin Reprocessing of the multi-channel seismic data is currently being undertaken in several Institutions using different seismic processing softwares (GeoVecteur, ProMAX, Focus), to take advantage of the diverse acquisitions and cope with their limitations, for instance high fold-order for Leg 2 and strength of signal but loose spatial sampling for the bigger source. The main objectives of the reprocessing of the selected profiles are to do a detailed velocity analysis and stacking after deconvolution, filtering to remove or suppress deep sea bottom multiples and out of plane reflections, and time-migration and depth conversion and thus reveal both the shallow and deeper reflection image of the crust in the Sea of Marmara. We show that choosing an appropriate processing sequence for different sources and acquisition

  19. Communication Design Education: Could Nine Reflections Be Sufficient?

    Science.gov (United States)

    van der Waarde, Karel; Vroombout, Maurits

    2012-01-01

    Situation: Graphic design education is subject to substantial changes. Changes in professional practice and higher education aggravate insecurities about the contents and structure of courses, assessment criteria, relations between practice, research and theory and teaching methods. Assumption: Graphic design education (visual communication design…

  20. Evaluation of vertical profiles to design continuous descent approach procedure

    Science.gov (United States)

    Pradeep, Priyank

    The current research focuses on predictability, variability and operational feasibility aspect of Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen). The idle-thrust CDA is a fuel economical, noise and emission abatement procedure, but requires increased separation to accommodate for variability and uncertainties in vertical and speed profiles of arriving aircraft. Although a considerable amount of researches have been devoted to the estimation of potential benefits of the CDA, only few have attempted to explain the predictability, variability and operational feasibility aspect of CDA. The analytical equations derived using flight dynamics and Base of Aircraft and Data (BADA) Total Energy Model (TEM) in this research gives insight into dependency of vertical profile of CDA on various factors like wind speed and gradient, weight, aircraft type and configuration, thrust settings, atmospheric factors (deviation from ISA (DISA), pressure and density of the air) and descent speed profile. Application of the derived equations to idle-thrust CDA gives an insight into sensitivity of its vertical profile to multiple factors. This suggests fixed geometric flight path angle (FPA) CDA has higher degree of predictability and lesser variability at the cost of non-idle and low thrust engine settings. However, with optimized design this impact can be overall minimized. The CDA simulations were performed using Future ATM Concept Evaluation Tool (FACET) based on radar-track and aircraft type data (BADA) of the real air-traffic to some of the busiest airports in the USA (ATL, SFO and New York Metroplex (JFK, EWR and LGA)). The statistical analysis of the vertical profiles of CDA shows 1) mean geometric FPAs derived from various simulated vertical profiles are consistently shallower than 3° glideslope angle and 2) high level of variability in vertical profiles of idle-thrust CDA even in absence of

  1. Highly Directive Reflect Array Antenna Design for Wireless Power Transfer

    Science.gov (United States)

    2017-04-14

    61102F 6.  AUTHOR(S) Siddhartha Prakash Duttagupta 5d.  PROJECT NUMBER 5e.  TASK NUMBER 5f.   WORK UNIT NUMBER 7.  PERFORMING ORGANIZATION NAME(S) AND...this study by Asian Office of Aerospace Research and Development (AOARD), USA 06 March, 2017 DISTRIBUTION A. Approved for public release...D parabolic design. These include suitability for manufacturing, ease of testing, and flexibility of RAA design for different frequencies

  2. Computer-aided design of broad band reflection type amplifiers

    DEFF Research Database (Denmark)

    Hammershaimb, Edgar; Jeppesen, Palle; Schjær-Jacobsen, Hans

    1974-01-01

    Microwave negative resistance reflection type amplifiers using stable transferred electron devices (TED's) are optimized by numerical optimization techniques programmed for an interactive graphic datascreen. The small signal impedance of packaged TED's is measured on an automatic network analyzer....... At the same time the impedance of unpackaged devices are obtained by on-line correction for the package parasitics. The microwave circuit chosen is a multiple slug coaxial cavity, that is modelled by sections of lossy transmission lines including step susceptances. The measured small signal impedance...... of the packaged TED's and the cavity model are used in a direct optimization procedure, in which the calculated minimum gain in the prescribed frequency range is progressively maximized by adjusting the lengths, characteristic impedances and positions of the slugs. The computed results are displayed...

  3. Reflections on Visualization in Cross-Cultural Design

    DEFF Research Database (Denmark)

    Rodil, Kasper

    2015-01-01

    in Namibia. I aim to show how conversations around visualiza-tions can increase a designer’s sensitivity to others’ perspectives, support mutual learn-ing, and trigger the engagement and criticism that are vital for co-design. Between the end of 2010 and 2013, I undertook eight research visits of 3 to 7 days...... a home there. Through participatory action research in Erindiroukambe, which developed since the end of 2008, we have engaged with a group of elders and run various design activities, which include amongst other activities four different digital prototypes, running on laptop and tablet computers. We have...

  4. Reflections on Teaching in The Design of Embedd ed Systems

    Directory of Open Access Journals (Sweden)

    Georffrey Acevedo González

    2013-06-01

    Full Text Available In the design of electronic solutions in areas as diverse as automotive, communications, automation, electronics, entertainment, industrial automation, medical applications, PC peripherals, consumer products and lighting among others, comes the need for integrated circuits that meet specific functions. This is where the designer must choose from a wide variety of options between manufacturers and between families called integrated circuit manufacturer. This article aims to provide elements for discussion on the criteria according to a particular need determine the choice of a microcontroller and the powers that result, the University should seek to develop in the professional electronics.

  5. Vertical seismic profiling and integration with reflection seismic studies at Laxemar, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Juhlin, C.; Bergman, B. [Uppsala Univ. (Sweden); Cosma, C.; Keskinen, J.; Enescu, N. [Vibrometric Oy, Helsinki (Finland)

    2002-02-01

    Vertical seismic profile (VSP) data were acquired in October 2000 in the 1700 m deep KLX02 borehole, near Laxemar in southeastern Sweden. The objectives of the VSP were to image reflectors in the borehole for correlation with surface seismic and borehole data, study the signal penetration of explosive versus mechanical sources and determine the seismic velocity as a function of depth. Five principal source points were used, one located close to the KLX02 wellhead and 4 others that were offset by about 200 m to 400 m. An explosive source was only used at the wellhead and consisted of 15 grams of dynamite in 90 cm deep shot holes in bedrock. A swept impact seismic source (SIST) was also used at the wellhead, as well as at the other four offset source points. The primary SIST source consisted of a computer controlled mechanical hammer mounted on a tractor. By activating the hammer over a 15 second sweep length, the total energy transferred to the ground is on the same order as that produced by the dynamite. The recorded data are then processed to generate seismic records that are equivalent to a single impact source. A smaller hand held SIST source was also tested at the wellhead. Tests of both the tractor mounted source and dynamite were made at a location offset somewhat from the wellhead at a site containing loose sediments at the surface. Full waveform sonic, resistivity and gamma logs were also acquired in conjunction the VSP survey. A comparison between the explosive and large SIST source shows that comparable energy levels are produced by the two methods. The SIST source appears to be more stable in terms of the energy level, although the frequency content of data are somewhat lower. However, its most significant advantage is the low cost of preparation of the source points and the speed of the acquisition. Numerous reflections are observed on the VSP, as is the case on the surface seismic, implying a complex structure in the vicinity of the KLX02 borehole

  6. Vertical seismic profiling and integration with reflection seismic studies at Laxemar, 2000

    International Nuclear Information System (INIS)

    Juhlin, C.; Bergman, B.; Cosma, C.; Keskinen, J.; Enescu, N.

    2002-02-01

    Vertical seismic profile (VSP) data were acquired in October 2000 in the 1700 m deep KLX02 borehole, near Laxemar in southeastern Sweden. The objectives of the VSP were to image reflectors in the borehole for correlation with surface seismic and borehole data, study the signal penetration of explosive versus mechanical sources and determine the seismic velocity as a function of depth. Five principal source points were used, one located close to the KLX02 wellhead and 4 others that were offset by about 200 m to 400 m. An explosive source was only used at the wellhead and consisted of 15 grams of dynamite in 90 cm deep shot holes in bedrock. A swept impact seismic source (SIST) was also used at the wellhead, as well as at the other four offset source points. The primary SIST source consisted of a computer controlled mechanical hammer mounted on a tractor. By activating the hammer over a 15 second sweep length, the total energy transferred to the ground is on the same order as that produced by the dynamite. The recorded data are then processed to generate seismic records that are equivalent to a single impact source. A smaller hand held SIST source was also tested at the wellhead. Tests of both the tractor mounted source and dynamite were made at a location offset somewhat from the wellhead at a site containing loose sediments at the surface. Full waveform sonic, resistivity and gamma logs were also acquired in conjunction the VSP survey. A comparison between the explosive and large SIST source shows that comparable energy levels are produced by the two methods. The SIST source appears to be more stable in terms of the energy level, although the frequency content of data are somewhat lower. However, its most significant advantage is the low cost of preparation of the source points and the speed of the acquisition. Numerous reflections are observed on the VSP, as is the case on the surface seismic, implying a complex structure in the vicinity of the KLX02 borehole

  7. Methodological Reflections: Designing and Understanding Computer-Supported Collaborative Learning

    Science.gov (United States)

    Hamalainen, Raija

    2012-01-01

    Learning involves more than just a small group of participants, which makes designing and managing collaborative learning processes in higher education a challenging task. As a result, emerging concerns in current research have pointed increasingly to teacher orchestrated learning processes in naturalistic learning settings. In line with this…

  8. The Reflective Citizen : General Design Education for a Sustainable Future

    OpenAIRE

    Digranes, Ingvild; Fauske, Laila Belinda

    2010-01-01

    With the Norwegian 2006 curriculum, the thoughts of a global responsibility in terms of a wide understanding of sustainability was introduced in general education in Art and Design education from 1st grade through lower secondary school (6-15 years). The focus of individual expression that dominated the subject during the charismatic paradigm of self-expression has in the documents to some extent been replaced by the focus on citizenship and user participation. The introduction, o...

  9. THE REFLECTIONS OF POPULAR CULTURE IN POSTER DESIGN

    Directory of Open Access Journals (Sweden)

    İbrahim Gökhan CEYLAN

    2015-09-01

    Full Text Available Poster is a product of graphic prepared for ıntorducing a culture or goods; or tranmitting a message. We can come across a poster almost in anywhere. As a product of graphic, a poster hav found its own place in many art movements and that’s why one should have the same concern for it as for others in the aspects of design and artistic view. The most important target of a commercial or advertisement is to reach the exact target audience at the exact time. Poster from its very begining, has became an area that needs a speciality in appliyng. Poster design aims to leave the neccessary effect whether by introducing the idea/product or by directing the target audience to the idea/ product. It is for sure that while moving the target audience to the aimed idea/ product, it is more easily-remembered using the popular cultural ıbjects which have a profound effect on the target audıence. Popular culture is mass culture. It is aimed to move the massive population by using the popular people, products and etc. In fact popular culture is a society to burden the creatvity and prodcution. It also a reason to resemble the society each other and it is a unit of constant changing. It is a consumption society in another saying. It supports consumption. In poster designs, it can be seen that designs are done under the effect of these popular culture. It is via this poiciy that consumers are directed to the target message or product.

  10. Modification of UV absorption profile of polymer film reflectors to increase solar-weighted reflectance

    Science.gov (United States)

    Jorgensen, Gary; Gee, Randall C.; White, David

    2017-05-02

    Provided are reflective thin film constructions including a reduced number of layers, which provides for increased solar-weighted hemispherical reflectance and durability. Reflective films include those comprising an ultraviolet absorbing abrasion resistant coating over a metal layer. Also provided are ultraviolet absorbing abrasion resistant coatings and methods for optimizing the ultraviolet absorption of an abrasion resistant coating. Reflective films disclosed herein are useful for solar reflecting, solar collecting, and solar concentrating applications, such as for the generation of electrical power.

  11. Reflecting Societal Values in Designing Flood Risk Management Strategies

    Directory of Open Access Journals (Sweden)

    Adamson Mark

    2016-01-01

    Full Text Available In 2006, the Office of Public Works (OPW began the National Catchment-based Flood Risk Assessment and Management (CFRAM Programme through a series of pilot studies. A Multi-Criteria Analysis (MCA Framework was developed through the pilot studies that integrated a number of objectives related to a wide range of potential impacts and benefits into the core of process of appraising and selecting suitable flood risk management measures for a given area or location, and then for prioritising national investments for different schemes and projects. This MCA Framework, that provides a systematic process of developing a non-monetised but numerical indicator of benefit and impact, has since been implemented nationally in the preparation of the Flood Risk Management Plans (FRMPs. A key feature of the MCA is that it should represent societal values. To this end, nationally representative quantitative research was undertaken to determine global weights that reflect the perceived importance of each of the objectives for reducing economic, social and environmental / cultural risks in flood management strategies. Saaty’s Analytical Hierarchy Process (AHP, in conjunction with a pair-wise comparison of criteria relating to these risks, was utilised to determine weights. In excess of 1,000 structured interviews were completed where the relative importance of these objectives were assessed using a seven-point scale. The weighting given to each of the 13 specific objectives identified broadly followed expectations, with risk to people followed by risk to homes and properties being respectively the first and second most important, although some were given greater or less weighting than expected. The national application of the MCA Framework, using the weighted objectives based on this process, through the CFRAM Programme has generally lead to the identification of appropriate and, based on local consultation, acceptable options for each community.

  12. Lipid profiles reflecting high and low risk for coronary heart disease : Contribution of apolipoprotein E polymorphism and lifestyle

    NARCIS (Netherlands)

    Boer, J.M.A.; Feskens, E.J.M.; Schouten, E.G.; Havekes, L.M.; Seidell, J.C.; Kromhout, D.

    1998-01-01

    To elucidate the role of modifiable factors and the apolipoprotein E polymorphism in explaining lipid profiles reflecting low, average and high risk for coronary heart disease, we selected subjects from a large population-based study. Subjects with low total cholesterol (TC) (< 15th percentile) and

  13. Lipid profiles reflecting high and low risk for coronary heart disease: contribution of apolipoprotein E polymorphism and lifestyle.

    NARCIS (Netherlands)

    Boer, J.M.A.; Feskens, E.J.M.; Schouten, E.G.; Havekes, L.M.; Seidell, J.C.; Kromhout, D.

    1998-01-01

    To elucidate the role of modifiable factors and the apolipoprotein E polymorphism in explaining lipid profiles reflecting low, average and high risk for coronary heart disease, we selected subjects from a large population-based study. Subjects with low total cholesterol (TC) (<15th percentile)

  14. Design and implementation of the ITPA confinement profile database

    Energy Technology Data Exchange (ETDEWEB)

    Walters, Malcolm E-mail: malcolm.walters@ukaea.org.uk; Roach, Colin

    2004-06-01

    One key goal of the fusion program is to improve the accuracy of physics models in describing existing experiments, so as to make better predictions of the performance of future fusion devices. To support this goal, databases of experimental results from multiple machines have been assembled to facilitate the testing of physics models over a wide range of operating conditions and plasma parameters. One such database was the International Multi-Tokamak Profile Database. This database has more recently been substantially revamped to exploit newer technologies, and is now known as the ITPA confinement profile database http://www.tokamak-profiledb.ukaea.org.uk. The overall design of the updated system will be outlined and the implementation of the relational database part will be described in detail.

  15. Learning from Students: Reflections from Personal Magazines in Basic Design Course

    Science.gov (United States)

    Gelmez, Koray; Bagli, Humanur

    2015-01-01

    Reflective writing is an efficient way of getting feedback from students. Paper-based or web-based course evaluation questionnaires alone may lack of collecting specific and detailed information, especially for the fields like design education. This study focuses on reflections captured from students via two different media--personal magazine and…

  16. Mobile Apps for Reflection in Learning: A Design Research in K-12 Education

    Science.gov (United States)

    Leinonen, Teemu; Keune, Anna; Veermans, Marjaana; Toikkanen, Tarmo

    2016-01-01

    This study takes a design-based research approach to explore how applications designed for mobile devices could support reflection in learning in K-12 education. Use of mobile devices is increasing in schools. Most of the educational apps support single-person use of interactive learning materials, simulations and learning games. Apps designed to…

  17. Engineering design of sub-micron topographies for simultaneously adherent and reflective metal-polymer interfaces

    Science.gov (United States)

    Brown, Christopher A.

    1993-01-01

    The approach of the project is to base the design of multi-function, reflective topographies on the theory that topographically dependent phenomena react with surfaces and interfaces at certain scales. The first phase of the project emphasizes the development of methods for understanding the sizes of topographic features which influence reflectivity. Subsequent phases, if necessary, will address the scales of interaction for adhesion and manufacturing processes. A simulation of the interaction of electromagnetic radiation, or light, with a reflective surface is performed using specialized software. Reflectivity of the surface as a function of scale is evaluated and the results from the simulation are compared with reflectivity measurements made on multi-function, reflective surfaces.

  18. PhyDesign: an online application for profiling phylogenetic informativeness

    Directory of Open Access Journals (Sweden)

    Townsend Jeffrey P

    2011-05-01

    Full Text Available Abstract Background The rapid increase in number of sequenced genomes for species across of the tree of life is revealing a diverse suite of orthologous genes that could potentially be employed to inform molecular phylogenetic studies that encompass broader taxonomic sampling. Optimal usage of this diversity of loci requires user-friendly tools to facilitate widespread cost-effective locus prioritization for phylogenetic sampling. The Townsend (2007 phylogenetic informativeness provides a unique empirical metric for guiding marker selection. However, no software or automated methodology to evaluate sequence alignments and estimate the phylogenetic informativeness metric has been available. Results Here, we present PhyDesign, a platform-independent online application that implements the Townsend (2007 phylogenetic informativeness analysis, providing a quantitative prediction of the utility of loci to solve specific phylogenetic questions. An easy-to-use interface facilitates uploading of alignments and ultrametric trees to calculate and depict profiles of informativeness over specified time ranges, and provides rankings of locus prioritization for epochs of interest. Conclusions By providing these profiles, PhyDesign facilitates locus prioritization increasing the efficiency of sequencing for phylogenetic purposes compared to traditional studies with more laborious and low capacity screening methods, as well as increasing the accuracy of phylogenetic studies. Together with a manual and sample files, the application is freely accessible at http://phydesign.townsend.yale.edu.

  19. Profile of male-field dependent (FD) prospective teacher's reflective thinking in solving contextual mathematical problem

    Science.gov (United States)

    Agustan, S.; Juniati, Dwi; Siswono, Tatag Yuli Eko

    2017-08-01

    Reflective thinking is an important component in the world of education, especially in professional education of teachers. In learning mathematics, reflective thinking is one way to solve mathematical problem because it can improve student's curiosity when student faces a mathematical problem. Reflective thinking is also a future competence that should be taught to students to face the challenges and to respond of demands of the 21st century. There are many factors which give impact toward the student's reflective thinking when student solves mathematical problem. One of them is cognitive style. For this reason, reflective thinking and cognitive style are important things in solving contextual mathematical problem. This research paper describes aspect of reflective thinking in solving contextual mathematical problem involved solution by using some mathematical concept, namely linear program, algebra arithmetic operation, and linear equations of two variables. The participant, in this research paper, is a male-prospective teacher who has Field Dependent. The purpose of this paper is to describe aspect of prospective teachers' reflective thinking in solving contextual mathematical problem. This research paper is a descriptive by using qualitative approach. To analyze the data, the researchers focus in four main categories which describe prospective teacher's activities using reflective thinking, namely; (a) formulation and synthesis of experience, (b) orderliness of experience, (c) evaluating the experience and (d) testing the selected solution based on the experience.

  20. Designers initiating open innovation with multi-stakeholder through co-reflection sessions

    NARCIS (Netherlands)

    Tomico Plasencia, O.; Lu, Y.; Baha, S.E.; Lehto, P.; Hivikoski, T.; Roozenburg, N.F.M.; Chen, L.; Stappers, P.J.

    2011-01-01

    This paper explores a designerly approach to open innovation initiation as start of the PhD research of the third author. More specifically, it presents the application of co-reflection sessions by designers in a healthcare open innovation project to initiate multi-stakeholder participation.

  1. Finite element design procedure for correcting the coining die profiles

    Science.gov (United States)

    Alexandrino, Paulo; Leitão, Paulo J.; Alves, Luis M.; Martins, Paulo A. F.

    2018-05-01

    This paper presents a new finite element based design procedure for correcting the coining die profiles in order to optimize the distribution of pressure and the alignment of the resultant vertical force at the end of the die stroke. The procedure avoids time consuming and costly try-outs, does not interfere with the creative process of the sculptors and extends the service life of the coining dies by significantly decreasing the applied pressure and bending moments. The numerical simulations were carried out in a computer program based on the finite element flow formulation that is currently being developed by the authors in collaboration with the Portuguese Mint. A new experimental procedure based on the stack compression test is also proposed for determining the stress-strain curve of the materials directly from the coin blanks.

  2. Reflective Occultation Mask for Evaluation of Occulter Designs for Planet Finding

    Science.gov (United States)

    Hagopian, John; Lyon, Richard; Shiri, Shahram; Roman, Patrick

    2011-01-01

    Advanced formation flying occulter designs utilize a large occulter mask flying in formation with an imaging telescope to block and null starlight to allow imaging of faint planets in exosolar systems. A paper describes the utilization of subscale reflective occultation masks to evaluate formation flying occulter designs. The use of a reflective mask allows mounting of the occulter by conventional means and simplifies the test configuration. The innovation alters the test set-up to allow mounting of the mask using standard techniques to eliminate the problems associated with a standard configuration. The modified configuration uses a reflective set-up whereby the star simulator reflects off of a reflective occulting mask and into an evaluation telescope. Since the mask is sized to capture all rays required for the imaging test, it can be mounted directly to a supporting fixture without interfering with the beam. Functionally, the reflective occultation mask reflects light from the star simulator instead of transmitting it, with a highly absorptive carbon nanotube layer simulating the occulter blocking mask. A subscale telescope images the star source and companion dim source that represents a planet. The primary advantage of this is that the occulter can be mounted conventionally instead of using diffractive wires or magnetic levitation.

  3. Antioxidant status and hormonal profile reflected by experimental feeding of probiotics.

    Science.gov (United States)

    Ghoneim, Magdy A; Moselhy, Said S

    2016-04-01

    Excessive production of free radicals can result in tissue damage, which mainly involves generation of hydroxyl radical and other oxidants. Such free radical-induced cell damage appears to play a major role in the pathogenesis of many diseases. Probiotics have been used therapeutically to modulate immunity, improve digestive processes, lower cholesterol, treat rheumatoid arthritis, and prevent cancer. The proposed research was designed to evaluate the changes in oxidative and antioxidative profile in addition to metabolic-related hormones of living animal model, which may generally affect the health status. Two groups of rabbits (10 animals each) were allocated in hygienic cages of controlled animal house. Control group received standard diet, and the other group received the same diet containing one probiotic for 30 days. Lactate dehydrogenase (LDH) activity in leukocytes, blood glucose, reduced glutathione (GSH), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px) were estimated in different tissues. Malondialdehyde (MDA) and total proteins were also determined in different tissues. Certain hormones related to metabolism and growth were also evaluated. Leukocytic LDH activity was significantly increased along with nonsignificant increase of blood glucose in probiotics-fed animals. Results showed significant decreases in the levels of triiodothyronine and thyroid-stimulating hormone but showed significant elevations in thyroxine, insulin, growth hormone, and testosterone levels in animals fed with probiotics. Total proteins content was highly significantly elevated in liver, kidneys, and muscles of probiotic-administered animals. Microsomal GSH level was significantly decreased only in skeletal muscles of probiotic-treated animals. MDA was significantly lowered in animal tissues fed with probiotics. GSH-Px activity was elevated in hepatic and muscular microsomes of probiotic-supplemented animals while it was nonsignificantly increased in renal

  4. Design of the tool for periodic not evolvent profiles

    Directory of Open Access Journals (Sweden)

    Anisimov Roman

    2017-01-01

    Full Text Available The new approach to profiling of the tool for processing of parts with periodic not evolvent profiles are considered in the article The discriminatory analysis of periodic profiles including repetition of profile both in the plane of perpendicular axis of part, and in the plane of passing along part of axis is offered. In the basis of the offered profiling method the idea of space shaping by rated surface of product of tool surface lies. The big advantage of the offered approach in profiling is its combination with the analysis of parameters of process of engineering work. It allows to predict the accuracy and surface quality of product with not evolvent periodic profile. While using the offered approach the pinion cutter for processing of wheels with internal triangular teeths and mill for processing of the screw of the counter of consumption of liquid, complex profile of which consists of several formings, have been received

  5. Written reflection –  enhancing the curriculum in design education

    DEFF Research Database (Denmark)

    Kjølsen, Tine; Sommer, Anne-Louise; Galle, Per

    2008-01-01

    This paper explores the complex interrelation and tension between the creative, artistic, reflective and academic dimensions of a design education under radical change. Since 2003, the Danish Design School has been in a process of transformation from traditional applied arts school to contemporary...... institution for design research and teaching at university level. So far, the most conspicuous changes on the educational level include structural changes according to the Bologna Declaration (a three-year BA level followed by a two-year MA level has been introduced), and a growing proportion of research......), not only for passing exams in Design Theory, but also as an integral part of studio work on design projects. Academic writing in the project context is developing into a genre in its own right, known as 'written reflection'. We shall briefly present this notion in terms of our experiences so far, current...

  6. The cuticular hydrocarbons profiles in the stingless bee Melipona marginata reflect task-related differences.

    Science.gov (United States)

    Ferreira-Caliman, M J; Nascimento, F S; Turatti, I C; Mateus, S; Lopes, N P; Zucchi, R

    2010-07-01

    Members of social insect colonies employ a large variety of chemical signals during their life. Of these, cuticular hydrocarbons are of primary importance for social insects since they allow for the recognition of conspecifics, nestmates and even members of different castes. The objectives of this study were (1) to characterize the variation of the chemical profiles among workers of the stingless bee Melipona marginata, and (2) to investigate the dependence of the chemical profiles on the age and on the behavior of the studied individuals. The results showed that cuticular hydrocarbon profiles of workers were composed of alkanes, alkenes and alkadienes that varied quantitatively and qualitatively according to function of workers in the colony. Copyright 2010 Elsevier Ltd. All rights reserved.

  7. Swept source optical coherence tomography of objects with arbitrary reflectivity profiles

    Science.gov (United States)

    Mezgebo, Biniyam; Nagib, Karim; Fernando, Namal; Kordi, Behzad; Sherif, Sherif

    2018-03-01

    Swept Source optical coherence tomography (SS-OCT) has become a well established imaging modality for both medical and industrial diagnostic applications. A cross-sectional SS-OCT image is obtained by applying an inverse discrete Fourier transform (DFT) to axial interferogram measured in the frequency domain (k-space). Fourier inversion of the obtained interferogram typically produces a potentially overlapping conjugate mirror image, whose overlap could be avoided by restricting the object to have its highest reflectivity at its surface. However, this restriction may not be fulfilled when imaging a very thin object that is placed on a highly reflective surface, or imaging an object containing a contrast agent with high reflectivity. In this paper, we show that oversampling of the SS-OCT signal in k-space would overcome the need for such restriction on the object. Our result is demonstrated using SS-OCT images of Axolotl salamander eggs.

  8. Ground magnetic studies along a regional seismic-reflection profile across Bare Mountain, Crater Flat and Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Langenheim, V.E.; Ponce, D.A.

    1995-01-01

    Ground magnetic data were collected along a 26-km-long regional seismic-reflection profile in southwest Nevada that starts in the Amargosa Desert, crosses Bare Mountain, Crater Flat and Yucca Mountain, and ends in Midway Valley. Parallel ground magnetic profiles were also collected about 100 m to either side of the western half of the seismic-reflection line. The magnetic data indicate that the eastern half of Crater Flat is characterized by closely-spaced faulting (1--2 km) in contrast to the western half of Crater Flat. Modeling of the data indicates that the Topopah Spring Tuff is offset about 250 m on the Solitario Canyon fault and about 50 m on the Ghost Dance fault. These estimates of fault offset are consistent with seismic-reflection data and geologic mapping. A broad magnetic high of about 500--600 nT is centered over Crater Flat. Modeling of the magnetic data indicates that the source of this high is not thickening and doming of the Bullfrog Tuff, but more likely lies below the Bullfrog Tuff. Possible source lithologies for this magnetic high include altered argillite of the Eleana Formation, Cretaceous or Tertiary intrusions, and mafic sills

  9. Reflection-for-action and the choice or design of examples in the teaching of mathematics

    Science.gov (United States)

    Olteanu, Constanta

    2017-09-01

    A qualitative study documented the use of examples in connection with reflection-for-action by mathematics educators. This article focuses on the use of mathematical examples that were chosen or designed by the teachers during lesson planning. The data are drawn from a 3-year project intended to make educational research in mathematics more useful to teachers. The focus in the present article was on how teachers reflected about students' learning as they prepared lessons. Analysis of the data showed that reflection-for-action was an effective teacher practice and useful for increasing the quality of the content the teacher intended to cover in a teaching situation. However, at the beginning of the study the teachers could not provide a proper explanation of what reflection was about. Their reflections were limited to preparing for the lessons in relation to the actual curriculum in Sweden. During the study, the teachers' reflection-for-action improved as a consequence of using patterns of variation in designing examples connected to the object of learning.

  10. Design of an O-mode frequency modulated reflectometry system for the measurement of Alborz Tokamak plasma density profile

    Energy Technology Data Exchange (ETDEWEB)

    Koohestani, Saeideh [Department of Energy Engineering and physics, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of); Amrollahi, Reza, E-mail: amrollahi@aut.ac.ir [Department of Energy Engineering and physics, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of); Moradi, Gholamreza [Department of Electrical Engineering, Amirkabir University of Technology, Tehran, 15875-4413, Islamic Republic of Iran (Iran, Islamic Republic of)

    2016-12-15

    Reflectometry is a common method for plasma diagnostic, in which microwaves are launched into the plasma and reflected at the critical surfaces. Comparing the reflected microwave signals with the launched waves would give rise to the plasma density profiles. In the present study, an ordinary mode (O-mode) frequency modulation (FM) reflectometry system has been designed for the electron density profile measurement of the Alborz Tokamak plasma. This system has been considered to operate at K-band (18–26.5 GHz) frequency range and scan the frequency band between 18 to 26 GHz in 40 μS. The density profile from major radius r = 47.9–51.55 cm can be measured in Alborz Tokamak plasma. Based on the Alborz Tokamak operational conditions, the characteristic frequencies, and some dimensional limitations, all parts of reflectometer have been designed so that an appropriate efficiency with minimum attenuation, especially in transmitting/receiving system would be achieved. A dual antenna and an oversized waveguide of X-band (8–12 GHz) for transmitting and receiving purposes and a balanced detector for absolute phase determination have been utilized. The details of the Alborz Tokamak FM reflectometry components focusing on the antenna and waveguide design and mounting are described in this paper. Additionally, the procedure of plasma profile reconstruction using the system output signal is discussed. This system uses signal phase shift to determine the position of the cutoff layer.

  11. Design algorithm for generatrix profile of cylindrical crowned rollers

    Directory of Open Access Journals (Sweden)

    Creţu Spiridon

    2017-01-01

    Full Text Available The cross-section of roller profile controls the pressure distribution in the contact area and radically affects the roller bearings basic dynamic load rating and rating lives. Today the most used roller profiles are the logarithmic profile and cylindrical-crowned (ZB profile. The logarithmic profile has a continuous evolution with no discontinuities till the intersection with the end fillet while ZB profile has two more discontinuities at the intersections points between the crowning circle and straight line generatrix. Using a semianalytical method, a numerical study has been carried out to find the optimum ZB profile for rollers incorporated in cylindrical rollers bearings. The basic reference rating life (L10_r has been used as optimization criterion.

  12. Nonpolarizing beam splitter designed by frustrated total internal reflection inside a glass cube.

    Science.gov (United States)

    Xu, Xueke; Shao, Jianda; Fan, Zhengxiu

    2006-06-20

    A method for the design of an all-dielectric nonpolarizing prism beam splitter utilizing the principle of frustrated total internal reflection is reported. The nonpolarizing condition for a prism beam splitter is discussed, and some single layer design examples are elaborated. The concept can be applied to a wide range of wavelengths and arbitrary transmittance values, and with the help of a computer design program examples of 400-700 nm, T(p)=T(s)=0.5+/-0.01, with incident angles of 45 degrees and 62 degrees are given. In addition, the sensitivity and application of the design are also discussed.

  13. Contribution of corner reflections from oriented ice crystals to backscattering and depolarization characteristics for off-zenith lidar profiling

    Science.gov (United States)

    Borovoi, Anatoli G.; Konoshonkin, Alexander V.; Kustova, Natalia V.; Veselovskii, Igor A.

    2018-06-01

    Backscattering Mueller matrix and the depolarization and color ratios for quasi-horizontally oriented hexagonal ice plates have been calculated within the framework of the physical optics approximation. In the case of a tilted lidar, the dependence of the color and depolarization ratios on polarization of the incident light has been analyzed. It is shown that the corner reflection effect inherent to the pristine hexagonal ice crystals results in sharp peaks of both the backscattering cross section and depolarization ratio at the lidar tilts of about 30° off zenith. The experimental results obtained recently by Veselovskii et al. [13] at the lidar tilt of 43° have been interpreted as a partial manifestation of the corner reflection effect. The retrieval of the vertical profile of the ice crystal fraction consisting of quasi-horizontally oriented hexagonal plates has been demonstrated.

  14. Reflecting metallic metasurfaces designed with stochastic optimization as waveplates for manipulating light polarization

    Science.gov (United States)

    Haberko, Jakub; Wasylczyk, Piotr

    2018-03-01

    We demonstrate that a stochastic optimization algorithm with a properly chosen, weighted fitness function, following a global variation of parameters upon each step can be used to effectively design reflective polarizing optical elements. Two sub-wavelength metallic metasurfaces, corresponding to broadband half- and quarter-waveplates are demonstrated with simple structure topology, a uniform metallic coating and with the design suited for the currently available microfabrication techniques, such as ion milling or 3D printing.

  15. Reflective Course Design: An Interplay between Pedagogy and Technology in a Language Teacher Education Course

    Science.gov (United States)

    Firdyiwek, Yitna; Scida, Emily E.

    2014-01-01

    This study reports on a sequence of iterative redesigns of a graduate-level foreign language teacher education course. The study describes the interplay between technology and pedagogy that resulted in important curricular changes, from a focus on individual to social and then holistic reflection. Using a team-based design model, instructional…

  16. Circulating, Cell-Free Micro-RNA Profiles Reflect Discordant Development of Dementia in Monozygotic Twins

    DEFF Research Database (Denmark)

    Mengel-From, Jonas; Rønne, Mette E; Carlsen, Anting L

    2018-01-01

    We aim to examine if circulating micro-RNA and cytokine levels associate with dementia diagnosis and cognitive scores. To test our hypothesis, we use plasma donated from 48 monozygotic twin pairs in 1997 and 46 micro-RNAs and 10 cytokines were quantified using microfluidic RT-qPCR and multiplex...... solid-phase immunoassays, respectively. Micro-RNA and cytokine profiling were examined for associations with dementia diagnoses in a longitudinal registry study or with cognitive scores at baseline. Thirty-six micro-RNAs and all cytokines were detected consistently. Micro-RNA profiles associate...... with diagnoses and cognitive scores at statistically significant levels while cytokine only showed trends pointing at chronic inflammation in twins having or developing dementia. The most notable findings were decreased miR-106a and miR-210, and increased miR-106b expression in twins with a dementia diagnosis...

  17. Creating Evaluation Profiles for Games Designed to be Fun: An Interpretive Framework for Serious Game Mechanics

    DEFF Research Database (Denmark)

    Ulrich, Frank; Helms, Niels Henrik

    2017-01-01

    Background. Games can be great pedagogical tools for educators and students. COTS games (commercialoff-the-shelf) are designed for the pure purpose of leisure but can also contain educational value. Aim. In this paper, we address the potential of COTS games as serious games. We develop...... an interpretive evaluation framework that can identify the educational value in COTS games. Application. The presented framework can create evaluative profiles of the learning, social, game, and immersive mechanics of COTS games as educational tools. Moreover, the framework can position COTS games between four...... enables critical reflection on the game mechanics; thereby capturing the complexity of the game mechanics that makes COTS game both educational and fun to play....

  18. Using Reflectance Spectroscopy and Artificial Neural Network to Assess Water Infiltration Rate into the Soil Profile

    Directory of Open Access Journals (Sweden)

    Naftali Goldshleger

    2012-01-01

    Full Text Available We explored the effect of raindrop energy on both water infiltration into soil and the soil's NIR-SWIR spectral reflectance (1200–2400 nm. Seven soils with different physical and morphological properties from Israel and the US were subjected to an artificial rainstorm. The spectral properties of the crust formed on the soil surface were analyzed using an artificial neural network (ANN. Results were compared to a study with the same population in which partial least-squares (PLS regression was applied. It was concluded that both models (PLS regression and ANN are generic as they are based on properties that correlate with the physical crust, such as clay content, water content and organic matter. Nonetheless, better results for the connection between infiltration rate and spectral properties were achieved with the non-linear ANN technique in terms of statistical values (RMSE of 17.3% for PLS regression and 10% for ANN. Furthermore, although both models were run at the selected wavelengths and their accuracy was assessed with an independent external group of samples, no pre-processing procedure was applied to the reflectance data when using ANN. As the relationship between infiltration rate and soil reflectance is not linear, ANN methods have the advantage for examining this relationship when many soils are being analyzed.

  19. A domain-independent descriptive design model and its application to structured reflection on design processes

    NARCIS (Netherlands)

    Reymen, Isabelle; Hammer, D.K.; Kroes, P.A.; van Aken, Joan Ernst; van Aken, J.E.; Dorst, C.H.; Bax, M.F.T.; Basten, T

    2006-01-01

    Domain-independent models of the design process are an important means for facilitating interdisciplinary communication and for supporting multidisciplinary design. Many so-called domain-independent models are, however, not really domain independent. We state that to be domain independent, the

  20. Reflections on architectural design education: The return of rationalism in the studio

    Directory of Open Access Journals (Sweden)

    Fathi Bashier

    2014-12-01

    The Department of Architecture and Urban Planning at the Ethiopian Institute of Technology EiT of Mekelle University (MU is currently developing a research program in which the development of and reflection on design methods is a key research area. Within this framework, the present study is intends to be an introductory effort to guide future empirical research. The present study aims to describe the design process of architects, and introduces theoretical and technical frameworks. The integrated design paradigm as a system of inquiry within the spatial relationship strategy is framed.

  1. User profiles and personas in the design and development of consumer health technologies.

    Science.gov (United States)

    LeRouge, Cynthia; Ma, Jiao; Sneha, Sweta; Tolle, Kristin

    2013-11-01

    complement traditional user profile and persona techniques for CHT design by integrating cognitive structures and present behavior that drive health care thinking, future behavior and demand; (3) show how the profiles and personas can be used to inform requirements, design and implementation decisions for a technology aimed at facilitating CHT adoption and diffusion for the elderly. To exemplify process and application, we use an action-research methodology, where user profiles and personas of an aging patient population were developed. The resultant profiles and personas were leveraged to improve the design, development and implementation plans of a smart phone application to assist chronically ill aging Chinese diabetic population capable of disease self-management. The results from the study show that user profile and persona can be a valuable methodological approach in capturing the conceptual model of the aging and informing the design and development decisions of CHT. The demonstration of techniques used in this study can serve as a guideline to CHT developers in bringing conceptual user modeling into the design of software interfaces targeted for users with specific health care needs. Specifically, the study provides guidance on the creation and use of profiles and personas to tap into the conceptual models of the targeted elderly population reflecting their preferences, capabilities and attitudes towards using technology in self-management care in general and the smart phone diabetes management application in particular. Insight into the mental model of the aging group has been shown to inform later stages of UCD development (e.g., the creation of prototypes and usability testing) as well as implementation and adoption strategies. The World Health Organization (WHO) predicts that by 2025, 80% of all new cases of diabetes are expected to appear in the developing countries. In fact, the number of diabetic patients in China is estimated to rise to 42.3 million in 2030

  2. Variable post-Paleozoic deformation detected by seismic reflection profiling across the northwestern "prong" of New Madrid seismic zone

    Science.gov (United States)

    McBride, J.H.; Pugin, Andre J.M.; Nelson, W.J.; Larson, T.H.; Sargent, S.L.; Devera, J.A.; Denny, F.B.; Woolery, E.W.

    2003-01-01

    High-resolution shallow seismic reflection profiles across the northwesternmost part of the New Madrid seismic zone (NMSZ) and northwestern margin of the Reelfoot rift, near the confluence of the Ohio and Mississippi Rivers in the northern Mississippi embayment, reveal intense structural deformation that apparently took place during the late Paleozoic and/or Mesozoic up to near the end of the Cretaceous Period. The seismic profiles were sited on both sides of the northeast-trending Olmsted fault, defined by varying elevations of the top of Mississippian (locally base of Cretaceous) bedrock. The trend of this fault is close to and parallel with an unusually straight segment of the Ohio River and is approximately on trend with the westernmost of two groups of northeast-aligned epicenters ("prongs") in the NMSZ. Initially suspected on the basis of pre-existing borehole data, the deformation along the fault has been confirmed by four seismic reflection profiles, combined with some new information from drilling. The new data reveal (1) many high-angle normal and reverse faults expressed as narrow grabens and anticlines (suggesting both extensional and compressional regimes) that involved the largest displacements during the late Cretaceous (McNairy); (2) a different style of deformation involving probably more horizontal displacements (i.e., thrusting) that occurred at the end of this phase near the end of McNairy deposition, with some fault offsets of Paleocene and younger units; (3) zones of steeply dipping faults that bound chaotic blocks similar to that observed previously from the nearby Commerce geophysical lineament (CGL); and (4) complex internal deformation stratigraphically restricted to the McNairy, suggestive of major sediment liquefaction or landsliding. Our results thus confirm the prevalence of complex Cretaceous deformations continuing up into Tertiary strata near the northern terminus of the NMSZ. ?? 2003 Elsevier Science B.V. All rights reserved.

  3. Profiling Patients’ Healthcare Needs to Support Integrated, Person-Centered Models for Long-Term Disease Management (Profile: Research Design

    Directory of Open Access Journals (Sweden)

    Arianne MJ Elissen

    2016-04-01

    Full Text Available Background: This article presents the design of PROFILe, a study investigating which (biomedical and non-(biomedical patient characteristics should guide more tailored chronic care. Based on this insight, the project aims to develop and validate ‘patient profiles’ that can be used in practice to determine optimal treatment strategies for subgroups of chronically ill with similar healthcare needs and preferences. Methods/Design: PROFILe is a practice-based research comprising four phases. The project focuses on patients with type 2 diabetes. During the first study phase, patient profiles are drafted based on a systematic literature research, latent class growth modeling, and expert collaboration. In phase 2, the profiles are validated from a clinical, patient-related and statistical perspective. Phase 3 involves a discrete choice experiment to gain insight into the patient preferences that exist per profile. In phase 4, the results from all analyses are integrated and recommendations formulated on which patient characteristics should guide tailored chronic care. Discussion: PROFILe is an innovative study which uses a uniquely holistic approach to assess the healthcare needs and preferences of chronically ill. The patient profiles resulting from this project must be tested in practice to investigate the effects of tailored management on patient experience, population health and costs.

  4. Probing the magnetic profile of diluted magnetic semiconductors using polarized neutron reflectivity.

    Science.gov (United States)

    Luo, X; Tseng, L T; Lee, W T; Tan, T T; Bao, N N; Liu, R; Ding, J; Li, S; Lauter, V; Yi, J B

    2017-07-24

    Room temperature ferromagnetism has been observed in the Cu doped ZnO films deposited under an oxygen partial pressure of 10 -3 and 10 -5 torr on Pt (200 nm)/Ti (45 nm)/Si (001) substrates using pulsed laser deposition. Due to the deposition at relatively high temperature (873 K), Cu and Ti atoms diffuse to the surface and interface, which significantly affects the magnetic properties. Depth sensitive polarized neutron reflectometry method provides the details of the composition and magnetization profiles and shows that an accumulation of Cu on the surface leads to an increase in the magnetization near the surface. Our results reveal that the presence of the copper at Zn sites induces ferromagnetism at room temperature, confirming intrinsic ferromagnetism.

  5. A simple method for migrating narrow aperture, noisy seismic reflection data and application to Project INDEPTH (International Deep Profiling of Tibet and the Himalaya) deep seismic profiles

    Science.gov (United States)

    Alsdorf, Doug

    1997-08-01

    Migration of deep seismic data is often hindered by a narrow recording aperture (line length by record length) and a low signal-to-noise ratio. The severity of typical migration artifacts (e.g., lateral smearing of discontinuous reflections into synforms, "smiles") increases with travel time such that interpreters of deep seismic data have often substituted migrated line drawings for the actual sections. As part of Project INDEPTH (International Deep Profiling of Tibet and the Himalaya), a new migration method was developed to address both the noise and migration issues. The method works in the time-space domain and uses the simple, constant velocity, straight ray path to perform the migration. First, only amplitudes within a given range are retained for migration, thus avoiding high-amplitude noise bursts and low-amplitude background noise. Then, the local dip of a reflection is found by automatically fitting a straight line to the highest amplitudes within a small window (several time samples by several traces) and calculating the dip of the line using a constant velocity. Finally, using this dip, the method migrates a selected amplitude value. The dips, lateral positions, and depths of the migrated events compare very well with output from more conventional algorithms (e.g.,fk-Stolt, finite difference, etc.). The advantages of the new method include fewer artifacts, fast computer run times, low memory use and the ability to migrate long profiles and travel times (e.g., 50 s). The output of the method is a grid of migrated amplitudes (not wavelets) or dip values which is particularly effective for making small figures, such as those needed for publication. The principal disadvantage is the use of a constant migration velocity.

  6. Design, Analysis, and On-Sun Evaluation of Reflective Strips Under Controlled Buckling

    Science.gov (United States)

    Jaworske, Donald A.; Sechkar, Edward A.; Colozza, Anthony J.

    2014-01-01

    Solar concentrators are envisioned for use in a variety of space-based applications, including applications involving in situ resource utilization. Identifying solar concentrators that minimize mass and cost are of great interest, especially since launch cost is driven in part by the mass of the payload. Concentrators must also be able to survive the wide temperature excursions on the lunar surface. Identifying smart structures which compensate for changes in concentrator geometry brought about by temperature extremes are of interest. Some applications may benefit from the ability to change the concentrators focal pattern at will. This paper addresses a method of designing a single reflective strip to produce a desired focal pattern through the use of controlled buckling. Small variations in the cross section over the length of the reflective strip influence the distribution of light in the focal region. A finite element method of analysis is utilized here which calculates the curve produced for a given strip cross section and axial load. Varying axial force and strip cross section over the length of the reflective strip provide a means of optimizing ray convergence in the focal region. Careful selection of a tapered cross section yields a reflective strip that approximates a parabola. An array of reflective strips under controlled buckling produces a light weight concentrator and adjustments in the compression of individual strips provide a means of compensating for temperature excursions or changing the focal pattern at will.

  7. Combined evaluation of grazing incidence X-ray fluorescence and X-ray reflectivity data for improved profiling of ultra-shallow depth distributions

    Energy Technology Data Exchange (ETDEWEB)

    Ingerle, D., E-mail: dingerle@ati.ac.at [Atominstitut, Vienna University of Technology, Stadionallee 2, A-1020 Vienna (Austria); Meirer, F. [Inorganic Chemistry and Catalysis, Debye Institute for Nanomaterials Science, Utrecht University, Universiteitsweg 99, 3584 CG Utrecht (Netherlands); Pepponi, G.; Demenev, E.; Giubertoni, D. [MiNALab, CMM-irst, Fondazione Bruno Kessler, Via Sommarive 18, I-38050 Povo (Italy); Wobrauschek, P.; Streli, C. [Atominstitut, Vienna University of Technology, Stadionallee 2, A-1020 Vienna (Austria)

    2014-09-01

    The continuous downscaling of the process size for semiconductor devices pushes the junction depths and consequentially the implantation depths to the top few nanometers of the Si substrate. This motivates the need for sensitive methods capable of analyzing dopant distribution, total dose and possible impurities. X-ray techniques utilizing the external reflection of X-rays are very surface sensitive, hence providing a non-destructive tool for process analysis and control. X-ray reflectometry (XRR) is an established technique for the characterization of single- and multi-layered thin film structures with layer thicknesses in the nanometer range. XRR spectra are acquired by varying the incident angle in the grazing incidence regime while measuring the specular reflected X-ray beam. The shape of the resulting angle-dependent curve is correlated to changes of the electron density in the sample, but does not provide direct information on the presence or distribution of chemical elements in the sample. Grazing Incidence XRF (GIXRF) measures the X-ray fluorescence induced by an X-ray beam incident under grazing angles. The resulting angle dependent intensity curves are correlated to the depth distribution and mass density of the elements in the sample. GIXRF provides information on contaminations, total implanted dose and to some extent on the depth of the dopant distribution, but is ambiguous with regard to the exact distribution function. Both techniques use similar measurement procedures and data evaluation strategies, i.e. optimization of a sample model by fitting measured and calculated angle curves. Moreover, the applied sample models can be derived from the same physical properties, like atomic scattering/form factors and elemental concentrations; a simultaneous analysis is therefore a straightforward approach. This combined analysis in turn reduces the uncertainties of the individual techniques, allowing a determination of dose and depth profile of the implanted

  8. High Resolution Vertical Seismic Profile from the Chicxulub IODP/ICDP Expedition 364 Borehole: Wave Speeds and Seismic Reflectivity.

    Science.gov (United States)

    Nixon, C.; Kofman, R.; Schmitt, D. R.; Lofi, J.; Gulick, S. P. S.; Christeson, G. L.; Saustrup, S., Sr.; Morgan, J. V.

    2017-12-01

    We acquired a closely-spaced vertical seismic profile (VSP) in the Chicxulub K-Pg Impact Crater drilling program borehole to calibrate the existing surface seismic profiles and provide complementary measurements of in situ seismic wave speeds. Downhole seismic records were obtained at spacings ranging from 1.25 m to 5 m along the borehole from 47.5 m to 1325 mwsf (meters wireline below sea floor) (Fig 1a) using a Sercel SlimwaveTM geophone chain (University of Alberta). The seismic source was a 30/30ci Sercel Mini GI airgun (University of Texas), fired a minimum of 5 times per station. Seismic data processing used a combination of a commercial processing package (Schlumberger's VISTA) and MatlabTM codes. The VSP displays detailed reflectivity (Fig. 1a) with the strongest reflection seen at 600 mwsf (280 ms one-way time), geologically corresponding to the sharp contact between the post-impact sediments and the target peak ring rock, thus confirming the pre-drilling interpretations of the seismic profiles. A two-way time trace extracted from the separated up-going wavefield matches the major reflection both in travel time and character. In the granitic rocks that form the peak ring of the Chicxulub impact crater, we observe P-wave velocities of 4000-4500 m/s which are significantly less than the expected values of granitoids ( 6000 m/s) (Fig. 1b). The VSP measured wave speeds are confirmed against downhole sonic logging and in laboratory velocimetry measurements; these data provide additional evidence that the crustal material displaced by the impact experienced a significant amount of damage. Samples and data provided by IODP. Samples can be requested at http://web.iodp.tamu.edu/sdrm after 19 October 2017. Expedition 364 was jointly funded by ECORD, ICDP, and IODP with contributions and logistical support from the Yucatan State Government and UNAM. The downhole seismic chain and wireline system is funded by grants to DRS from the Canada Foundation for Innovation and

  9. Salmonella enterica Prophage Sequence Profiles Reflect Genome Diversity and Can Be Used for High Discrimination Subtyping

    Directory of Open Access Journals (Sweden)

    Walid Mottawea

    2018-05-01

    Full Text Available Non-typhoidal Salmonella is a leading cause of foodborne illness worldwide. Prompt and accurate identification of the sources of Salmonella responsible for disease outbreaks is crucial to minimize infections and eliminate ongoing sources of contamination. Current subtyping tools including single nucleotide polymorphism (SNP typing may be inadequate, in some instances, to provide the required discrimination among epidemiologically unrelated Salmonella strains. Prophage genes represent the majority of the accessory genes in bacteria genomes and have potential to be used as high discrimination markers in Salmonella. In this study, the prophage sequence diversity in different Salmonella serovars and genetically related strains was investigated. Using whole genome sequences of 1,760 isolates of S. enterica representing 151 Salmonella serovars and 66 closely related bacteria, prophage sequences were identified from assembled contigs using PHASTER. We detected 154 different prophages in S. enterica genomes. Prophage sequences were highly variable among S. enterica serovars with a median ± interquartile range (IQR of 5 ± 3 prophage regions per genome. While some prophage sequences were highly conserved among the strains of specific serovars, few regions were lineage specific. Therefore, strains belonging to each serovar could be clustered separately based on their prophage content. Analysis of S. Enteritidis isolates from seven outbreaks generated distinct prophage profiles for each outbreak. Taken altogether, the diversity of the prophage sequences correlates with genome diversity. Prophage repertoires provide an additional marker for differentiating S. enterica subtypes during foodborne outbreaks.

  10. Applying a learning design methodology in the flipped classroom approach – empowering teachers to reflect and design for learning

    Directory of Open Access Journals (Sweden)

    Evangelia Triantafyllou

    2016-05-01

    Full Text Available One of the recent developments in teaching that heavily relies on current technology is the “flipped classroom” approach. In a flipped classroom the traditional lecture and homework sessions are inverted. Students are provided with online material in order to gain necessary knowledge before class, while class time is devoted to clarifications and application of this knowledge. The hypothesis is that there could be deep and creative discussions when teacher and students physically meet. This paper discusses how the learning design methodology can be applied to represent, share and guide educators through flipped classroom designs. In order to discuss the opportunities arising by this approach, the different components of the Learning Design – Conceptual Map (LD-CM are presented and examined in the context of the flipped classroom. It is shown that viewing the flipped classroom through the lens of learning design can promote the use of theories and methods to evaluate its effect on the achievement of learning objectives, and that it may draw attention to the employment of methods to gather learner responses. Moreover, a learning design approach can enforce the detailed description of activities, tools and resources used in specific flipped classroom models, and it can make educators more aware of the decisions that have to be taken and people who have to be involved when designing a flipped classroom. By using the LD-CM, this paper also draws attention to the importance of characteristics and values of different stakeholders (i.e. institutions, educators, learners, and external agents, which influence the design and success of flipped classrooms. Moreover, it looks at the teaching cycle from a flipped instruction model perspective and adjusts it to cater for the reflection loops educators are involved when designing, implementing and re-designing a flipped classroom. Finally, it highlights the effect of learning design on the guidance

  11. Lagoa Real design. Cachoeira mine. Uranium ratio from gamma profile

    International Nuclear Information System (INIS)

    Juliao, B.

    1984-06-01

    This paper presents the satisfactory accuracy of uranium ratio from gamma profile, using an equation from simple regression. The comparative study between radiometric ratios calculated from gamma data in boreholes and uranium ratio determined by Delayed Neutron Analysis shows a good measure of correlation in Cachoeira Mines. (author)

  12. Emerging Profiles for Cultured Meat; Ethics through and as Design.

    Science.gov (United States)

    van der Weele, Cor; Driessen, Clemens

    2013-07-26

    The development of cultured meat has gained urgency through the increasing problems associated with meat, but what it might become is still open in many respects. In existing debates, two main moral profiles can be distinguished. Vegetarians and vegans who embrace cultured meat emphasize how it could contribute to the diminishment of animal suffering and exploitation, while in a more mainstream profile cultured meat helps to keep meat eating sustainable and affordable. In this paper we argue that these profiles do not exhaust the options and that (gut) feelings as well as imagination are needed to explore possible future options. On the basis of workshops, we present a third moral profile, "the pig in the backyard". Here cultured meat is imagined as an element of a hybrid community of humans and animals that would allow for both the consumption of animal protein and meaningful relations with domestic (farm) animals. Experience in the workshops and elsewhere also illustrates that thinking about cultured meat inspires new thoughts on "normal" meat. In short, the idea of cultured meat opens up new search space in various ways. We suggest that ethics can take an active part in these searches, by fostering a process that integrates (gut) feelings, imagination and rational thought and that expands the range of our moral identities.

  13. Emerging Profiles for Cultured Meat; Ethics through and as Design

    Directory of Open Access Journals (Sweden)

    Clemens Driessen

    2013-07-01

    Full Text Available The development of cultured meat has gained urgency through the increasing problems associated with meat, but what it might become is still open in many respects. In existing debates, two main moral profiles can be distinguished. Vegetarians and vegans who embrace cultured meat emphasize how it could contribute to the diminishment of animal suffering and exploitation, while in a more mainstream profile cultured meat helps to keep meat eating sustainable and affordable. In this paper we argue that these profiles do not exhaust the options and that (gut feelings as well as imagination are needed to explore possible future options. On the basis of workshops, we present a third moral profile, “the pig in the backyard”. Here cultured meat is imagined as an element of a hybrid community of humans and animals that would allow for both the consumption of animal protein and meaningful relations with domestic (farm animals. Experience in the workshops and elsewhere also illustrates that thinking about cultured meat inspires new thoughts on “normal” meat. In short, the idea of cultured meat opens up new search space in various ways. We suggest that ethics can take an active part in these searches, by fostering a process that integrates (gut feelings, imagination and rational thought and that expands the range of our moral identities.

  14. Emerging profiles for cultured meat; ethics through and as design

    NARCIS (Netherlands)

    Weele, van der C.; Driessen, C.P.G.

    2013-01-01

    The development of cultured meat has gained urgency through the increasing problems associated with meat, but what it might become is still open in many respects. In existing debates, two main moral profiles can be distinguished. Vegetarians and vegans who embrace cultured meat emphasize how it

  15. Identification and uncertainty estimation of vertical reflectivity profiles using a Lagrangian approach to support quantitative precipitation measurements by weather radar

    Science.gov (United States)

    Hazenberg, P.; Torfs, P. J. J. F.; Leijnse, H.; Delrieu, G.; Uijlenhoet, R.

    2013-09-01

    This paper presents a novel approach to estimate the vertical profile of reflectivity (VPR) from volumetric weather radar data using both a traditional Eulerian as well as a newly proposed Lagrangian implementation. For this latter implementation, the recently developed Rotational Carpenter Square Cluster Algorithm (RoCaSCA) is used to delineate precipitation regions at different reflectivity levels. A piecewise linear VPR is estimated for either stratiform or neither stratiform/convective precipitation. As a second aspect of this paper, a novel approach is presented which is able to account for the impact of VPR uncertainty on the estimated radar rainfall variability. Results show that implementation of the VPR identification and correction procedure has a positive impact on quantitative precipitation estimates from radar. Unfortunately, visibility problems severely limit the impact of the Lagrangian implementation beyond distances of 100 km. However, by combining this procedure with the global Eulerian VPR estimation procedure for a given rainfall type (stratiform and neither stratiform/convective), the quality of the quantitative precipitation estimates increases up to a distance of 150 km. Analyses of the impact of VPR uncertainty shows that this aspect accounts for a large fraction of the differences between weather radar rainfall estimates and rain gauge measurements.

  16. Optimization design of airfoil profiles based on the noise of wind turbines

    DEFF Research Database (Denmark)

    Cheng, Jiangtao; Chen, Jin; Cheng, Jiangtao

    2012-01-01

    Based on design theory of airfoil profiles and airfoil self-noise prediction model, a new method with the target of the airfoil average efficiency-noise ratio of design ranges for angle of attack had been developed for designing wind turbine airfoils. The airfoil design method was optimized for a...

  17. Emerging Profiles for Cultured Meat; Ethics through and as Design

    Science.gov (United States)

    van der Weele, Cor; Driessen, Clemens

    2013-01-01

    Simple Summary The idea of cultured meat is to grow meat from animal cells with tissue engineering techniques. Cultured meat is an idea under investigation that will not be ready for the market for several years. It is also still open what it could or should be like. We argue that this openness offers the opportunity to explore different directions in which this idea could be developed. Feelings, critical thinking and the imagination all have important roles to play in this exploration. Abstract The development of cultured meat has gained urgency through the increasing problems associated with meat, but what it might become is still open in many respects. In existing debates, two main moral profiles can be distinguished. Vegetarians and vegans who embrace cultured meat emphasize how it could contribute to the diminishment of animal suffering and exploitation, while in a more mainstream profile cultured meat helps to keep meat eating sustainable and affordable. In this paper we argue that these profiles do not exhaust the options and that (gut) feelings as well as imagination are needed to explore possible future options. On the basis of workshops, we present a third moral profile, “the pig in the backyard”. Here cultured meat is imagined as an element of a hybrid community of humans and animals that would allow for both the consumption of animal protein and meaningful relations with domestic (farm) animals. Experience in the workshops and elsewhere also illustrates that thinking about cultured meat inspires new thoughts on “normal” meat. In short, the idea of cultured meat opens up new search space in various ways. We suggest that ethics can take an active part in these searches, by fostering a process that integrates (gut) feelings, imagination and rational thought and that expands the range of our moral identities. PMID:26479525

  18. Optimization Design of IGV Profile in Centrifugal Compressor

    Directory of Open Access Journals (Sweden)

    Qi Sun

    2017-01-01

    Full Text Available Variable inlet guide vane (IGV is used to control the mass flow and generate prewhirl in centrifugal compressors. The efficient operation of IGV is limited to the range of aerodynamic characteristics of their vane profiles. In order to find out the best vane profile for IGV regulation, the modern optimization method was adopted to optimize the inlet guide vane profile. The main methodology idea was to use artificial neural network for continuous fitness evaluation and use genetic algorithm for global optimization. After optimization, the regulating performance of IGV has improved significantly, the prewhirl ability has been enhanced greatly, and the pressure loss has been reduced. The mass flow and power of compressor reduced by using the optimized guide vane at large setting angles, and the efficiency increased significantly; the flow field distribution has been improved obviously, since the nonuniform distribution of flow and flow separation phenomenon greatly weakened or even completely disappeared. The achievement of this research can effectively improve the regulation ability of IGV and the performance of compressor.

  19. Design of Elliptic Reflective LED Surgical Shadowless Lamps Using Mathematical Optical Tracing Algorithms

    Directory of Open Access Journals (Sweden)

    Cheng-Tang Pan

    2014-01-01

    Full Text Available Traditional surgical shadowless halogen lamps are generally designed as projection type with many light bulbs, which can produce not only mercury pollution but also heat radiation that are serious problems to patient. The study utilized Runge-Kutta methods and mathematical algorithms to design and optimize the freeform lens. The LED (light-emitting diode was adopted to replace the traditional halogen lamp. A uniform lens was designed and fabricated based on the energy conservation. At first, the light field of LED is concentrated through the freeform lens to improve the optical efficiency. Second, the three-shell elliptic curves are applied to the reflective surgical shadowless lamps, where only few LED chips are needed. Light rays emitting from different directions to the target plane can achieve the goal of shadowless. In this study, the LED’s luminance flux is 1,895 lm. The shadow dilution on the target plane is 54%. Ec (central illuminance is 114,900 lux, and the d50/d10 is 57% which is higher than the regulation by 7%, whereas the power consumption is only 20 W. The energy of reflective surgical shadowless lamps can save more than 50%, compared with the traditional projective one.

  20. Attenuated total reflection design for in situ FT-IR spectroelectrochemical studies

    International Nuclear Information System (INIS)

    Visser, Hendrik; Curtright, Aimee E.; McCusker, James K.; Sauer, Kenneth

    2000-01-01

    A versatile spectroelectrochemical apparatus is introduced to study the changes in IR spectra of organic and inorganic compounds upon oxidation or reduction. The design is based on an attenuated total reflection (ATR) device, which permits the study of a wide spectral range of 16,700 cm-1 (600 nm) - 250 cm-1 with a small opaque region of 2250 - 1900 cm-1. In addition, an IR data collection protocol is introduced to deal with electrochemically non-reversible background signals. This method is tested with ferrocene in acetonitrile, producing results that agree with those in the literature

  1. Design of intermediate die shape of multistage profile drawing for linear motion guide

    International Nuclear Information System (INIS)

    Lee, Sang Kon; Lee, Jae Eun; Kim, Sung Min; Kim, Byung Min

    2010-01-01

    The design of an intermediate die shape is very important in multistage profile drawing. In this study, two design methods for the intermediate die shape of a multistage profile drawing for producing a linear motion guide (LM) guide is proposed. One is the electric field analysis method using the equipotential lines generated by electric field analysis, and the other is the virtual die method using a virtual drawing die constructed from the initial material and the final product shape. In order to design the intermediate die shapes of a multistage profile drawing for producing LM guide, the proposed design methods are applied, and then FE analysis and profile drawing experiment are performed. As a result, based on the measurement of dimensional accuracy, it can be known that the intermediate die shape can be designed effectively

  2. Key Inflammatory Processes in Human NASH Are Reflected in Ldlr-/-.Leiden Mice: A Translational Gene Profiling Study.

    Science.gov (United States)

    Morrison, Martine C; Kleemann, Robert; van Koppen, Arianne; Hanemaaijer, Roeland; Verschuren, Lars

    2018-01-01

    Introduction: It is generally accepted that metabolic inflammation in the liver is an important driver of disease progression in NASH and associated matrix remodeling/fibrosis. However, the exact molecular inflammatory mechanisms are poorly defined in human studies. Investigation of key pathogenic mechanisms requires the use of pre-clinical models, for instance for time-resolved studies. Such models must reflect molecular disease processes of importance in patients. Herein we characterized inflammation in NASH patients on the molecular level by transcriptomics and investigated whether key human disease pathways can be recapitulated experimentally in Ldlr -/- .Leiden mice, an established pre-clinical model of NASH. Methods: Human molecular inflammatory processes were defined using a publicly available NASH gene expression profiling dataset (GSE48452) allowing the comparison of biopsy-confirmed NASH patients with normal controls. Gene profiling data from high-fat diet (HFD)-fed Ldlr -/- .Leiden mice (GSE109345) were used for assessment of the translational value of these mice. Results: In human NASH livers, we observed regulation of 65 canonical pathways of which the majority was involved in inflammation (32%), lipid metabolism (16%), and extracellular matrix/remodeling (12%). A similar distribution of pathways across these categories, inflammation (36%), lipid metabolism (24%) and extracellular matrix/remodeling (8%) was observed in HFD-fed Ldlr -/- .Leiden mice. Detailed evaluation of these pathways revealed that a substantial proportion (11 out of 13) of human NASH inflammatory pathways was recapitulated in Ldlr -/- .Leiden mice. Furthermore, the activation state of identified master regulators of inflammation (i.e., specific transcription factors, cytokines, and growth factors) in human NASH was largely reflected in Ldlr -/- .Leiden mice, further substantiating its translational value. Conclusion: Human NASH is characterized by upregulation of specific

  3. Key Inflammatory Processes in Human NASH Are Reflected in Ldlr−/−.Leiden Mice: A Translational Gene Profiling Study

    Science.gov (United States)

    Morrison, Martine C.; Kleemann, Robert; van Koppen, Arianne; Hanemaaijer, Roeland; Verschuren, Lars

    2018-01-01

    Introduction: It is generally accepted that metabolic inflammation in the liver is an important driver of disease progression in NASH and associated matrix remodeling/fibrosis. However, the exact molecular inflammatory mechanisms are poorly defined in human studies. Investigation of key pathogenic mechanisms requires the use of pre-clinical models, for instance for time-resolved studies. Such models must reflect molecular disease processes of importance in patients. Herein we characterized inflammation in NASH patients on the molecular level by transcriptomics and investigated whether key human disease pathways can be recapitulated experimentally in Ldlr−/−.Leiden mice, an established pre-clinical model of NASH. Methods: Human molecular inflammatory processes were defined using a publicly available NASH gene expression profiling dataset (GSE48452) allowing the comparison of biopsy-confirmed NASH patients with normal controls. Gene profiling data from high-fat diet (HFD)-fed Ldlr−/−.Leiden mice (GSE109345) were used for assessment of the translational value of these mice. Results: In human NASH livers, we observed regulation of 65 canonical pathways of which the majority was involved in inflammation (32%), lipid metabolism (16%), and extracellular matrix/remodeling (12%). A similar distribution of pathways across these categories, inflammation (36%), lipid metabolism (24%) and extracellular matrix/remodeling (8%) was observed in HFD-fed Ldlr−/−.Leiden mice. Detailed evaluation of these pathways revealed that a substantial proportion (11 out of 13) of human NASH inflammatory pathways was recapitulated in Ldlr−/−.Leiden mice. Furthermore, the activation state of identified master regulators of inflammation (i.e., specific transcription factors, cytokines, and growth factors) in human NASH was largely reflected in Ldlr−/−.Leiden mice, further substantiating its translational value. Conclusion: Human NASH is characterized by upregulation of specific

  4. Applying a learning design methodology in the flipped classroom approach – empowering teachers to reflect

    DEFF Research Database (Denmark)

    Triantafyllou, Evangelia; Kofoed, Lise; Purwins, Hendrik

    2016-01-01

    One of the recent developments in teaching that heavily relies on current technology is the “flipped classroom” approach. In a flipped classroom the traditional lecture and homework sessions are inverted. Students are provided with online material in order to gain necessary knowledge before class......, while class time is devoted to clarifications and application of this knowledge. The hypothesis is that there could be deep and creative discussions when teacher and students physically meet. This paper discusses how the learning design methodology can be applied to represent, share and guide educators...... and values of different stakeholders (i.e. institutions, educators, learners, and external agents), which influence the design and success of flipped classrooms. Moreover, it looks at the teaching cycle from a flipped instruction model perspective and adjusts it to cater for the reflection loops educators...

  5. Metabolite profiling identifies candidate markers reflecting the clinical adaptations associated with Roux-en-Y gastric bypass surgery.

    Directory of Open Access Journals (Sweden)

    David M Mutch

    Full Text Available BACKGROUND: Roux-en-Y gastric bypass (RYGB surgery is associated with weight loss, improved insulin sensitivity and glucose homeostasis, and a reduction in co-morbidities such as diabetes and coronary heart disease. To generate further insight into the numerous metabolic adaptations associated with RYGB surgery, we profiled serum metabolites before and after gastric bypass surgery and integrated metabolite changes with clinical data. METHODOLOGY AND PRINCIPAL FINDINGS: Serum metabolites were detected by gas and liquid chromatography-coupled mass spectrometry before, and 3 and 6 months after RYGB in morbidly obese female subjects (n = 14; BMI = 46.2+/-1.7. Subjects showed decreases in weight-related parameters and improvements in insulin sensitivity post surgery. The abundance of 48% (83 of 172 of the measured metabolites changed significantly within the first 3 months post RYGB (p<0.05, including sphingosines, unsaturated fatty acids, and branched chain amino acids. Dividing subjects into obese (n = 9 and obese/diabetic (n = 5 groups identified 8 metabolites that differed consistently at all time points and whose serum levels changed following RYGB: asparagine, lysophosphatidylcholine (C18:2, nervonic (C24:1 acid, p-Cresol sulfate, lactate, lycopene, glucose, and mannose. Changes in the aforementioned metabolites were integrated with clinical data for body mass index (BMI and estimates for insulin resistance (HOMA-IR. Of these, nervonic acid was significantly and negatively correlated with HOMA-IR (p = 0.001, R = -0.55. CONCLUSIONS: Global metabolite profiling in morbidly obese subjects after RYGB has provided new information regarding the considerable metabolic alterations associated with this surgical procedure. Integrating clinical measurements with metabolomics data is capable of identifying markers that reflect the metabolic adaptations following RYGB.

  6. Experimental design for reflection measurements of highly reactive liquid or solid substances with application to liquid sodium

    International Nuclear Information System (INIS)

    Chan, S.H.; Gossler, A.A.

    1980-01-01

    A versatile goniometer system with associated electronic components and mechanical instruments has been assembled. It is designed to measure spectral, specular reflectances of highly reactive liquid or solid substances over a spectral range of 0.3 to 9 μ and incidence angles of 12 to 30 0 off the normal direction. The capability of measuring reflectances of liquid substances clearly distinguishes this experimental design from conventional systems which are applicable only to solid substances. This design has been used to measure the spectral, specular reflectance of liquid sodium and preliminary results obtained are compared with those of solid sodium measured by other investigators

  7. Identification of sixteen peptides reflecting heat and/or storage induced processes by profiling of commercial milk samples.

    Science.gov (United States)

    Ebner, Jennifer; Baum, Florian; Pischetsrieder, Monika

    2016-09-16

    Peptide profiles of different drinking milk samples were examined to study how the peptide fingerprint of milk reflects processing conditions. The combination of a simple and fast method for peptide extraction using stage tips and MALDI-TOF-MS enabled the fast and easy generation and relative quantification of peptide fingerprints for high-temperature short-time (HTST), extended shelf life (ESL) and ultra-high temperature (UHT) milk of the same dairies. The relative quantity of 16 peptides changed as a function of increasing heat load. Additional heating experiments showed that among those, the intensity of peptide β-casein 196-209 (m/z 1460.9Da) was most heavily influenced by heat treatment indicating a putative marker peptide for milk processing conditions. Storage experiments with HTST- and UHT milk revealed that the differences between different types of milk samples were not only caused by the heating process. Relevant was also the proteolytic activity of enzymes during storage, which were differently influenced by the heat treatment. These results indicate that the peptide profile may be suitable to monitor processing as well as storage conditions of milk. In the present study, peptide profiling of different types of milk was carried out by MALDI-TOF-MS after stage-tip extraction and relative quantification using an internal reference peptide. Although MALDI-TOF-MS covers only part of the peptidome, the method is easy and quick and is, therefore, suited for routine analysis to address several aspects of food authenticity. Using this method, 16 native peptides were detected in milk that could be modulated by different industrial processes. Subsequent heating and storage experiments with pasteurized and UHT milk confirmed that these peptides are indeed related to the production or storage conditions of the respective products. Furthermore, the heating experiments revealed one peptide, namely the β-casein-derived sequence β-casein 196-209, which underwent

  8. Design Space Exploration of Object Caches with Cross-Profiling

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Binder, Walter; Villazon, Alex

    2011-01-01

    . However, before implementing such an object cache, an empirical analysis of different organization forms is needed. We use a cross-profiling technique based on aspect-oriented programming in order to evaluate different object cache organizations with standard Java benchmarks. From the evaluation we......To avoid data cache trashing between heap-allocated data and other data areas, a distinct object cache has been proposed for embedded real-time Java processors. This object cache uses high associativity in order to statically track different object pointers for worst-case execution-time analysis...... conclude that field access exhibits some temporal locality, but almost no spatial locality. Therefore, filling long cache lines on a miss just introduces a high miss penalty without increasing the hit rate enough to make up for the increased miss penalty. For an object cache, it is more efficient to fill...

  9. Wind turbines and bat mortality: Doppler shift profiles and ultrasonic bat-like pulse reflection from moving turbine blades.

    Science.gov (United States)

    Long, Chloe V; Flint, James A; Lepper, Paul A

    2010-10-01

    Bat mortality resulting from actual or near-collision with operational wind turbine rotors is a phenomenon that is widespread but not well understood. Because bats rely on information contained in high-frequency echoes to determine the nature and movement of a target, it is important to consider how ultrasonic pulses similar to those used by bats for echolocation may be interacting with operational turbine rotor blades. By assessing the characteristics of reflected ultrasonic echoes, moving turbine blades operating under low wind speed conditions (<6 m s(-1)) were found to produce distinct Doppler shift profiles at different angles to the rotor. Frequency shifts of up to ±700-800 Hz were produced, which may not be perceptible by some bat species. Monte Carlo simulation of bat-like sampling by echolocation revealed that over 50 rotor echoes could be required by species such as Pipistrellus pipistrellus for accurate interpretation of blade movement, which may not be achieved in the bat's approach time-window. In summary, it was found that echoes returned from moving blades had features which could render them attractive to bats or which might make it difficult for the bat to accurately detect and locate blades in sufficient time to avoid a collision.

  10. Question Sets and Profiles: A Technique for Evaluating Building Design.

    Science.gov (United States)

    Scoffham, Stephen

    1982-01-01

    A questionnaire (survey sheet) has been developed focusing on some of the factors an architect has to consider in designing a house (site, appearance, suitability, and building maintenance). The use of the questionnaire by students and "spin off" activities are discussed. (Author/JN)

  11. Fabrication of small mock-ups reflecting the design features of the ITER semi-prototype

    International Nuclear Information System (INIS)

    Jung, Yang-Il; Choi, Byoung-Kwon; Park, Jeong-Yong; Kim, Suk-Kwon; Lee, Dong Won; Kim, Byoung Yoon

    2012-01-01

    The ITER semi-prototype was designed to qualify the manufacturing technology for the ITER blanket first wall. However, its fabrication is expected to face great difficulty due to a design complexity. Even though joining technology for different materials such as beryllium, CuCrZr, and stainless steel (SS) was developed during the first stage of qualification, the joining is still a key issue for the fabrication of the semi-prototype. In this study, small mock-ups (SMU) were fabricated to realize and verify the manufacturing of the semi-prototype reflecting the described design features. The joining of multiple beryllium tiles on the angled CuCrZr surface was confirmed with SMU no. 1. Six beryllium tiles were joined using hot isostatic pressing (HIP), and slitting was then performed to form multiple tiles. In SMU no. 2, HIP was performed two times in order to facilitate the cooling channels at the CuCrZr/SS interface, and to join the beryllium tiles on CuCrZr/SS. The method used to form a pressure boundary for the complex cooling channels was also developed by fabricating the SMU no. 3. The SMUs confirmed the applicability of the HIP for the manufacturing of the semi-prototype.

  12. Designing Reflection and Symmetry Learning by Using Math Traditional Dance in Primary School

    Directory of Open Access Journals (Sweden)

    Yullys Helsa

    2011-01-01

    Full Text Available The innovation of education is an important point of Pendidikan Matematika Realistik Indonesia (PMRI, one of them through traditional dance as a context of national cultural. Dance that collaborated with concept of mathematics, it is called Math Traditional Dance. This research aims to produce learning line (specific the material of reflection and symmetry. The research method used is design research that consisted of preparing for the experiments, teaching experiments, and retrospective analysis. Data collected through observation, interviews, documentation and field notes. This research was conducted with 22 students in MIN 2 Palembang. From the try out that is obtained from the formal to the informal learning described in the learning process, so that support learning process of mirroring and symmetry for the students in grade four in elementary school.

  13. Design of a Shielded Reflection Type Pulsed Eddy Current Probe for the Evaluation of Thickness

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Young Kil; Choi, Dong Myung [Kunsan National University, Gunsan (Korea, Republic of)

    2007-10-15

    For better evaluation of material thickness by using the reflection type pulsed eddy current method, various probe models are designed and their response signals, characteristics, and sensitivities to thickness variation are investigated by a numerical analysis method. Since the sensor needs to detect magnetic fields from eddy currents induced in a test material, not from the exciter coil, two types of models that are shielded by the combination of copper and ferrite and only by ferrite are considered. By studying response signals from these shielded probe models, the peak value and the zero crossing time are selected as useful signal features for the evaluation of material thickness. Investigation of sensitivities of these two features shows that the sensitivity of peak value is more useful than that of zero crossing time and that the probe shielded only by ferrite gives much better sensitivity to thickness variation

  14. Measured reflectance of graded multilayer mirrors designed for astronomical hard X-ray telescopes

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Craig, W.W.; Windt, D.L.

    2000-01-01

    Future astronomical X-ray telescopes, including the balloon-borne High-Energy Focusing Telescope (HEFT) and the Constellation-X Hard X-ray Telescope (Con-X HXT) plan to incorporate depth-graded multilayer coatings in order to extend sensitivity into the hard X-ray (10 less than or similar to E less......-graded W/Si multilayers optimized for broadband performance up to 69.5 keV (WK-edge). These designs are ideal for both the HEFT and Con-X HXT applications. We compare the measurements to model calculations to demonstrate that the reflectivity can be well described by the intended power law distribution...

  15. Specific Features of Destabilization of the Wave Profile During Reflection of an Intense Acoustic Beam from a Soft Boundary

    Science.gov (United States)

    Deryabin, M. S.; Kasyanov, D. A.; Kurin, V. V.; Garasyov, M. A.

    2016-05-01

    We show that a significant energy redistribution occurs in the spectrum of reflected nonlinear waves, when an intense acoustic beam is reflected from an acoustically soft boundary, which manifests itself at short wave distances from a reflecting boundary. This effect leads to the appearance of extrema in the distributions of the amplitude and intensity of the field of the reflected acoustic beam near the reflecting boundary. The results of physical experiments are confirmed by numerical modeling of the process of transformation of nonlinear waves reflected from an acoustically soft boundary. Numerical modeling was performed by means of the Khokhlov—Zabolotskaya—Kuznetsov (KZK) equation.

  16. MISSION PROFILE AND DESIGN CHALLENGES FOR MARS LANDING EXPLORATION

    Directory of Open Access Journals (Sweden)

    J. Dong

    2017-07-01

    Full Text Available An orbiter and a descent module will be delivered to Mars in the Chinese first Mars exploration mission. The descent module is composed of a landing platform and a rover. The module will be released into the atmosphere by the orbiter and make a controlled landing on Martian surface. After landing, the rover will egress from the platform to start its science mission. The rover payloads mainly include the subsurface radar, terrain camera, multispectral camera, magnetometer, anemometer to achieve the scientific investigation of the terrain, soil characteristics, material composition, magnetic field, atmosphere, etc. The landing process is divided into three phases (entry phase, parachute descent phase and powered descent phase, which are full of risks. There exit lots of indefinite parameters and design constrain to affect the selection of the landing sites and phase switch (mortaring the parachute, separating the heat shield and cutting off the parachute. A number of new technologies (disk-gap-band parachute, guidance and navigation, etc. need to be developed. Mars and Earth have gravity and atmosphere conditions that are significantly different from one another. Meaningful environmental conditions cannot be recreated terrestrially on earth. A full-scale flight validation on earth is difficult. Therefore the end-to-end simulation and some critical subsystem test must be considered instead. The challenges above and the corresponding design solutions are introduced in this paper, which can provide reference for the Mars exploration mission.

  17. Initiation and evolution of the Oligo-Miocene rift basins of southwestern Europe: Contribution of deep seismic reflection profiling

    Science.gov (United States)

    Bois, C.

    1993-11-01

    Southwestern European Oligo-Miocene rift basins have recently been investigated by deep seismic reflection profiling. The study of these data, together with other geophysical and geological data, shows that the rifts, which run from the Rhinegraben to the western Mediterranean, do not form a single clearcut system. The N-trending rifts (Rhinegraben, Bresse and Limagne) were developed on a cold and rigid lithosphere affected by the Alpine collision. The NE-trending rifts (southeastern France, Gulf of Lions and Valencia Trough) were formed slightly later in a backarc basin associated with an active segment of the European-Iberian plate that was heated, affected by widespread calcalkaline volcanism and probably weakened. All the southwestern European rifts and basins together may, however, be related to a common heritage represented by the boundary between the European-Iberian and African-Apulian plates that was created in the Jurassic with the initiation of the Tethys Ocean. The present features of the southwestern European Oligo-Miocène rift basins may be explained by a combination of three geodynamic mechanisms: mechanical stretching of the lithosphere, active mantle uplifting, and subordinate lithospheric flexuring. All the rifts were probably initiated by passive stretching. A systematic discrepancy between stretching derived from fault analysis and attenuation of the crust has been observed in all the rifts. This suggests that these rifts were subsequently reworked by one or several active mantle upwelling events associated with late shoulder uplift, asthenosphere upwelling and anomalous P-wave velocities in the lowermost crust and the uppermost mantle. Crustal attenuation may have been achieved by mantle intrusion, metamorphism of the deep crust and/or its delamination. Some of the rifts were affected by lithospheric flexuring. Combinations, in various proportions, of a small number of geodynamic mechanisms probably controlled many basins in the world. This

  18. Design and simulation of reflect-array metasurfaces in the visible regime

    KAUST Repository

    Alrasheed, Salma; Di Fabrizio, Enzo M.

    2017-01-01

    gradient phase gap-surface plasmon metasurfaces that exhibit high conversion efficiency (up to ∼97% of total reflected light) to the anomalous reflection angle for blue, green, and red wavelengths at normal and oblique incidence, and where light

  19. Designing Reflection and Symmetry Learning by Using Math Traditional Dance in Primary School

    Directory of Open Access Journals (Sweden)

    Yullys Helsa

    2011-01-01

    Full Text Available The innovation of education is an important point of Pendidikan Matematika Realistik Indonesia (PMRI, one of them through traditional dance as a context of national cultural. Dance that collaborated with concept of mathematics, it is called Math Traditional Dance. This research aims to produce learning line (specific the material of reflection and symmetry. The research method used is design research that consisted of preparing for the experiments, teaching experiments, and retrospective analysis. Data collected through observation, interviews, documentation and field notes. This research was conducted with 22 students in MIN 2 Palembang. From the try out that is obtained from the formal to the informal learning described in the learning process, so that support learning process of mirroring and symmetry for the students in grade four in elementary school.Key words: PMRI, math traditional dance, design research, learning path, mirroring and symmetry DOI: http://dx.doi.org/10.22342/jme.2.1.782.79-94

  20. Hybrid reflection type metasurface of nano-antennas designed for optical needle field generation

    Science.gov (United States)

    Wang, Shiyi; Zhan, Qiwen

    2015-03-01

    We propose a reflection type metal-insulator-metal (MIM) metasurface composed of hybrid optical antennas for comprehensive spatial engineering the properties of optical fields. Its capability is illustrated with an example to create a radially polarized vectorial beam for optical needle field generation. Functioning as local quarter-wave-plates (QWP), the MIM metasurface is designed to convert circularly polarized incident into local linear polarization to create an overall radial polarization with corresponding binary phases and desired normalized amplitude modulation ranged from 0.07 to 1. To obtain enough degrees of freedom, the optical-antenna layer comprises periodic arrangements of double metallic nano-bars with perpendicular placement and single nano-bars respectively for different amplitude modulation requirements. Both of the antennas enable to introduce π/2 retardation while reaching the desired modulation range both for phase and amplitude. Through adjusting the antennas' geometry and array carefully, we shift the gap-surface plasmon resonances facilitated by optical antennas to realize the manipulation of vectorial properties. Designed at 1064 nm wavelength, the particularly generated vectorial light output can be further tightly focused by a high numerical aperture objective to obtain longitudinally polarized flat-top focal field. The so-called optical needle field is a promising candidate for novel applications that transcend disciplinary boundaries. The proposed metasurface establishes a new class of compact optical components based on nano-scale structures, leading to compound functions for vectorial light generation.

  1. Anti-Memorials and the Art of Forgetting: Critical Reflections on a Memorial Design Practice

    Directory of Open Access Journals (Sweden)

    SueAnne Ware

    2008-08-01

    Full Text Available Andreas Huyssen writes, ‘Remembrance as a vital human activity shapes our links to the past, and the ways we remember define us in the present. As individuals and societies, we need the past to construct and to anchor our identities and to nurture a vision of the future.’ Memory is continually affected by a complex spectrum of states such as forgetting, denial, repression, trauma, recounting and reconsidering, stimulated by equally complex changes in context and changes over time. The apprehension and reflective comprehension of landscape is similarly beset by such complexities. Just as the nature and qualities of memory comprise inherently fading, shifting and fleeting impressions of things which are themselves ever-changing, an understanding of a landscape, as well as the landscape itself, is a constantly evolving, emerging response to both immense and intimate influences. There is an incongruity between the inherent changeability of both landscapes and memories, and the conventional, formal strategies of commemoration that typify the constructed landscape memorial. The design work presented in this paper brings together such explorations of memory and landscape by examining the ‘memorial’. This article examines two projects. One concerns the fate of illegal refugees travelling to Australia: The SIEVX Memorial Project. The other, An Anti-Memorial to Heroin Overdose Victims, was designed by the author as part of the 2001 Melbourne Festival.

  2. Profiles

    International Nuclear Information System (INIS)

    2004-01-01

    Profiles is a synthetic overview of more than 100 national energy markets in the world, providing insightful facts and key energy statistics. A Profile is structured around 6 main items and completed by key statistics: Ministries, public agencies, energy policy are concerned; main companies in the oil, gas, electricity and coal sectors, status, shareholders; reserve, production, imports and exports, electricity and refining capacities; deregulation of prices, subsidies, taxes; consumption trends by sector, energy market shares; main energy projects, production and consumption prospects. Statistical Profiles are present in about 3 pages the main data and indicators on oil, gas, coal and electricity. (A.L.B.)

  3. Automated design system for a rotor with an ellipse lobe profile

    International Nuclear Information System (INIS)

    Jung, Sung Yuen; Kim Chul; Han, Seung Moo; Cho, Hae Yong

    2009-01-01

    An internal lobe pump (ILP) is suitable for machine tool oil hydraulics, automotive engines, compressors, and various other devices. In particular, the ILP is an essential component of an automotive engine, used to feed lubricant oil through the system. The main components of an ILP are its rotors. The outer rotor is typically characterized by lobes with an elliptical shape, and the inner rotor profile is a conjugate to the outer profile. This paper describes a theoretical analysis of an ILP and the development of an integrated automated system for rotor design. This system is composed of three main modules and has been developed using AutoLISP for the AutoCAD program. The system generates a new lobe profile and automatically calculates flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis can enable oil pump designers and manufacturers to become more efficient

  4. Automated design system for a rotor with an ellipse lobe profile

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Yuen; Kim Chul [Pusan National University, Busan (Korea, Republic of); Han, Seung Moo [Kyung Hee University, Seoul (Korea, Republic of); Cho, Hae Yong [Chungbuk National University, Cheongju (Korea, Republic of)

    2009-11-15

    An internal lobe pump (ILP) is suitable for machine tool oil hydraulics, automotive engines, compressors, and various other devices. In particular, the ILP is an essential component of an automotive engine, used to feed lubricant oil through the system. The main components of an ILP are its rotors. The outer rotor is typically characterized by lobes with an elliptical shape, and the inner rotor profile is a conjugate to the outer profile. This paper describes a theoretical analysis of an ILP and the development of an integrated automated system for rotor design. This system is composed of three main modules and has been developed using AutoLISP for the AutoCAD program. The system generates a new lobe profile and automatically calculates flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis can enable oil pump designers and manufacturers to become more efficient

  5. An Arduino-Based Experiment Designed to Clarify the Transition to Total Internal Reflection

    Science.gov (United States)

    Atkin, Keith

    2018-01-01

    The topic of refraction and reflection of light at the boundary of transparent media is a fundamentally important one. The special case of total internal reflection is however commonly misrepresented in elementary textbooks. This paper addresses the problem and describes an experimental procedure for measuring and displaying reflected and…

  6. Profiles of environmental contaminants in hawksbill turtle egg yolks reflect local to distant pollution sources among nesting beaches in the Yucatán Peninsula, Mexico.

    Science.gov (United States)

    Muñoz, Cynthia C; Vermeiren, Peter

    2018-04-01

    Knowledge of spatial variation in pollutant profiles among sea turtle nesting locations is limited. This poses challenges in identifying processes shaping this variability and sets constraints to the conservation management of sea turtles and their use as biomonitoring tools for environmental pollutants. We aimed to increase understanding of the spatial variation in polycyclic aromatic hydrocarbon (PAH), organochlorine pesticide (OCP) and polychlorinated biphenyl (PCB) compounds among nesting beaches. We link the spatial variation to turtle migration patterns and the persistence of these pollutants. Specifically, using gas chromatography, we confirmed maternal transfer of a large number of compounds (n = 68 out of 69) among 104 eggs collected from 21 nests across three nesting beaches within the Yucatán Peninsula, one of the world's most important rookeries for hawksbill turtles (Eretmochelys imbricata). High variation in PAH profiles was observed among beaches, using multivariate correspondence analysis and univariate Peto-Prentice tests, reflecting local acquisition during recent migration movements. Diagnostic PAH ratios reflected petrogenic origins in Celestún, the beach closest to petroleum industries in the Gulf of Mexico. By contrast, pollution profiles of OCPs and PCBs showed high similarity among beaches, reflecting the long-term accumulation of these pollutants at regional scales. Therefore, spatial planning of protected areas and the use of turtle eggs in biomonitoring needs to account for the spatial variation in pollution profiles among nesting beaches. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Stretched membrane heliostats: design and structural analysis of reflectance module and support of a heliostats of 9 m. diaform and 60 m''3 of reflectance surface

    International Nuclear Information System (INIS)

    Figarola Torres, J. M.

    1993-01-01

    After having designed and built at CIEMAT a first prototype of a Btretched membrane heliostats of 3 m. diameter, the design and the structural analysis of the different components included in the reflectance module and support of another heliostats, this one of 9 m. diameter and 60 m2. of reflectance surface, are shown In this report. This last heliostats will be mounted on a pedestal and its driving device at the Solar Platform of Almeria. In order to optimize design and performance, the structural analysis of its basic components has been analyzed with the finite elements program ANSYS. The following elements have been subject to analysis: the membrane and their ring supports, stretching system and the structural support. A similar scheme to the one applied to the previous prototype has been used on the focus control system. That includes a linear transducer, a variable frequency and a fan. Finally it has to be pointed out that substantial improvements have been achieved with respect to the first prototype concerning design and cost. (Author) 5 refs

  8. Real field mission profile oriented design of a SiC-based PV-inverter application

    DEFF Research Database (Denmark)

    Sintamarean, Nicolae Christian; Blaabjerg, Frede; Wang, Huai

    2013-01-01

    This paper introduces a real field mission profile oriented design tool for the new generation of grid connected PV-inverters applications based on SiC-devices. The proposed design tool consists of a grid connected PV-inverter model, an ElectroThermal model, a converter safe operating area (SOA...... Zth_H in order to perform in a safe mode for the whole operating range. Furthermore, the proposed design tool considers the mission profile (the measured solar irradiance and ambient temperature) from the real field where the converter will operate. Thus, a realistic loading of the converter devices......) model, a mission profile model and an the evaluation block. The PV-system model involves a three level bipolar switch neutral point clamped (3L-BS NPC) inverter connected to the three phase grid through a LCL-filter. Moreover, the SOA model calculates the required converter heatsink thermal impedance...

  9. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI.

    Science.gov (United States)

    Gutt, C; Sant, T; Ksenzov, D; Capotondi, F; Pedersoli, E; Raimondi, L; Nikolov, I P; Kiskinova, M; Jaiswal, S; Jakob, G; Kläui, M; Zabel, H; Pietsch, U

    2017-09-01

    We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M 2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q -resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Q z , we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  10. Meaning profiles of dwellings, pathways, and metaphors in design: implications for education

    Science.gov (United States)

    Casakin, Hernan; Kreitler, Shulamith

    2017-11-01

    The study deals with the roles and interrelations of the meaning-based assessments of dwellings, pathways and metaphors in design performance. It is grounded in the Meaning Theory [Kreitler, S., and H. Kreitler. 1990. The Cognitive Foundations of Personality Traits. New York: Plenum], which enables identifying the cognitive contents and processes underlying cognitive performance in different domains, thus rendering them more accessible to educational training. The objectives were to identify the components of the meaning profiles of dwellings, pathways, and metaphors as perceived by design students; to analyse their interrelations; and to examine which of the identified components of these constructs serve as best predictors of design performance aided by the use of metaphors. Participants were administered a design task and questionnaires about the Dimensional Profiles of Dwellings, Pathways, and Metaphors, based on the meaning system. Factors based on the factor analyses of the responses to the three questionnaires were used in regression analyses as predictors of the performance score in a design task. The following three factors of the dimensional meaning profiles of metaphors were significant predictors of design performance: sensory, functional, and structural evaluations. Implications for design education are discussed, primarily concerning the important role of metaphor in design problem-solving.

  11. Design of the multi-reflection time-of-flight mass spectrometer for the RAON facility

    International Nuclear Information System (INIS)

    Yoon, J.W.; Park, Y.H.; Park, S.J.; Kim, G.D.; Kim, Y.K.

    2014-01-01

    A multi-reflection time-of-flight mass spectrometer (MR-TOF-MS) has been proposed for high precision mass measurements on the future Korean heavy ion accelerator called RAON. MR-TOF-MS will allow us to reach very high mass resolving power (> 10 5 ) with extremely short measurement times (several ms) in a compact device. The MR-TOF-MS is composed of two electrostatic ion mirrors in combination with einzel lenses. The principle is that the injected ions travel for hundreds of revolutions inside MR-TOF-MS and ions with different masses are temporally separated. When temporal separation becomes larger than the ion bunch width, ions are extracted from the MR-TOF-MS by switching off the mirror voltages, and then arrive at a detector plane located at time focus, where an MCP detector for the mass measurement or an ion gate for the isobar separation is deployed. In this paper, simulation results for the MR-TOF-MS design using SIMION code are presented. Temporal broadenings, caused by the kinetic energy spread and the transverse emittance, were minimized by optimization of the electrode potentials, and it was demonstrated that the mass resolving power of 10 5 is achievable for the condition of an energy spread of ±30 eV and an emittance of 0.75 π*mm*mrad

  12. Experimental design for reflection measurements of highly reactive liquid or solid substances with application to liquid sodium

    International Nuclear Information System (INIS)

    Chan, S.H.; Gossler, A.A.

    1980-01-01

    This technical report describes the experimental part of a program on thermal radiation properties of reactor materials. A versatile goniometer system with associated electronic components and mechanical instruments has been assembled. It is designed to measure spectral, specular reflectances of highly reactive liquid or solid substances over a spectral range of 0.3 μ to 9 μ and incidence angles of 12 0 to 30 0 off the normal direction. The capability of measuring reflectances of liquid substances clearly distinguishes this experimental design from conventional systems which are applicable only to solid substances. This design has been used to measure the spectral, specular reflectance of liquid sodium and preliminary results obtained are compared with those of solid sodium measured by other investigators

  13. Design of multi-layer anti-reflection coating for terrestrial solar panel ...

    Indian Academy of Sciences (India)

    To date, there is no ideal anti-reflection (AR) coating available on solar glass which can effectively transmit the incident light within the visible wavelength range. However, there is a need to develop multifunctional coatingwith superior anti-reflection properties and self-cleaning ability meant to be used for solar glass panels.

  14. Diffusion Profiling via a Histogram Approach Distinguishes Low-grade from High-grade Meningiomas, Can Reflect the Respective Proliferative Potential and Progesterone Receptor Status.

    Science.gov (United States)

    Gihr, Georg Alexander; Horvath-Rizea, Diana; Garnov, Nikita; Kohlhof-Meinecke, Patricia; Ganslandt, Oliver; Henkes, Hans; Meyer, Hans Jonas; Hoffmann, Karl-Titus; Surov, Alexey; Schob, Stefan

    2018-02-01

    Presurgical grading, estimation of growth kinetics, and other prognostic factors are becoming increasingly important for selecting the best therapeutic approach for meningioma patients. Diffusion-weighted imaging (DWI) provides microstructural information and reflects tumor biology. A novel DWI approach, histogram profiling of apparent diffusion coefficient (ADC) volumes, provides more distinct information than conventional DWI. Therefore, our study investigated whether ADC histogram profiling distinguishes low-grade from high-grade lesions and reflects Ki-67 expression and progesterone receptor status. Pretreatment ADC volumes of 37 meningioma patients (28 low-grade, 9 high-grade) were used for histogram profiling. WHO grade, Ki-67 expression, and progesterone receptor status were evaluated. Comparative and correlative statistics investigating the association between histogram profiling and neuropathology were performed. The entire ADC profile (p10, p25, p75, p90, mean, median) was significantly lower in high-grade versus low-grade meningiomas. The lower percentiles, mean, and modus showed significant correlations with Ki-67 expression. Skewness and entropy of the ADC volumes were significantly associated with progesterone receptor status and Ki-67 expression. ROC analysis revealed entropy to be the most accurate parameter distinguishing low-grade from high-grade meningiomas. ADC histogram profiling provides a distinct set of parameters, which help differentiate low-grade versus high-grade meningiomas. Also, histogram metrics correlate significantly with histological surrogates of the respective proliferative potential. More specifically, entropy revealed to be the most promising imaging biomarker for presurgical grading. Both, entropy and skewness were significantly associated with progesterone receptor status and Ki-67 expression and therefore should be investigated further as predictors for prognostically relevant tumor biological features. Since absolute ADC

  15. Design and Analysis of Multilayered Waveguide Structure With Metal-Dielectric Gratings for Sensing With Reflection Narrowband Notch Filter

    Directory of Open Access Journals (Sweden)

    Guiju ZHANG

    2015-11-01

    Full Text Available Developments in micro and nanofabrication technologies have led a variety of grating waveguide structures (GWS being proposed and implemented in optics and laser application systems. A new design of multilayered nanostructure double-grating is described for reflection notch filter. Thin metal film and dielectric film are used and designed with one-dimensional composite gratings. The results calculated by rigorous coupled-wave analysis (RCWA present that the thin metal film between substrate and grating can produce significant attenuated reflections and efficiency in a broad reflected spectral range. The behavior of such a reflection filter is evaluated for refractive index sensing, which can be applied inside the integrated waveguide structure while succeeding cycles in measurement. The filter peaks are designed and obtained in a visible range with full width half maximum (FWHM of several nanometers to less than one nanometer. The multilayered structure shows a sensitivity of refractive index of 220nm/RIU as changing the surroundings. The reflection spectra are studied under different periods, depths and duty cycles. The passive structure and its characteristics can achieve practical applications in various fields, such as optical sensing, color filtering, Raman spectroscopy and laser technology.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9625

  16. Rain cell-based identification of the vertical profile of reflectivity as observed by weather radar and its use for precipitation uncertainty estimation

    Science.gov (United States)

    Hazenberg, P.; Torfs, P. J. J. F.; Leijnse, H.; Uijlenhoet, R.

    2012-04-01

    The wide scale implementation of weather radar systems over the last couple of decades has increased our understanding concerning spatio-temporal precipitation dynamics. However, the quantitative estimation of precipitation by these devices is affected by many sources of error. A very dominant source of error results from vertical variations in the hydrometeor size distribution known as the vertical profile of reflectivity (VPR). Since the height of the measurement as well as the beam volume increases with distance from the radar, for stratiform precipitation this results in a serious underestimation (overestimation) of the surface reflectivity while sampling within the snow (bright band) region. This research presents a precipitation cell-based implementation to correct volumetric weather radar measurements for VPR effects. Using the properties of a flipping carpenter square, a contour-based identification technique was developed, which is able to identify and track precipitation cells in real time, distinguishing between convective, stratiform and undefined precipitation. For the latter two types of systems, for each individual cell, a physically plausible vertical profile of reflectivity is estimated using a Monte Carlo optimization method. Since it can be expected that the VPR will vary within a given precipitation cell, a method was developed to take the uncertainty of the VPR estimate into account. As a result, we are able to estimate the amount of precipitation uncertainty as observed by weather radar due to VPR for a given precipitation type and storm cell. We demonstrate the possibilities of this technique for a number of winter precipitation systems observed within the Belgian Ardennes. For these systems, in general, the precipitation uncertainty estimate due to vertical reflectivity profile variations varies between 10-40%.

  17. Design of multi-layer anti-reflection coating for terrestrial solar panel ...

    Indian Academy of Sciences (India)

    2National Centre for Photovoltaic Research & Education, Department of Electrical Engineering,. Indian Institute of Technology, Bombay 400 076, India. MS received 14 .... improve the anti-reflective property, a low refractive index material like ...

  18. Design and simulation of reflect-array metasurfaces in the visible regime

    KAUST Repository

    Alrasheed, Salma

    2017-04-07

    Metasurfaces are new, promising ultrathin materials that can enable many novel optical devices due to their ability to act as a discontinuity interface that introduces an abrupt change in amplitude, phase, and sometimes the polarization of the incident light at the wavelength scale. Therefore they can function as flat optical elements. Here, we investigate the anomalous reflection of light for transverse-magnetic (TM) polarization for normal and oblique incidence in the visible regime. We propose gradient phase gap-surface plasmon metasurfaces that exhibit high conversion efficiency (up to ∼97% of total reflected light) to the anomalous reflection angle for blue, green, and red wavelengths at normal and oblique incidence, and where light polarization is unchanged after the reflection.

  19. R-NEST: Design-Based Research for Technology-Enhanced Reflective Practice in Initial Teacher Education

    Science.gov (United States)

    Thompson Long, Bonnie; Hall, Tony

    2015-01-01

    This paper reports research into developing digital storytelling (DST) to enhance reflection within a specific professional learning context--that of a programme of teacher education--while concomitantly producing a transferrable design framework for adaption into other, similar post-secondary educational contexts. There has been limited…

  20. Reflections on Online Learning Designs and Cross-Institutional Research Collaborations: Revisiting "Classrooms without Walls" in Two Australian Universities

    Science.gov (United States)

    Rossi, Dolene; van Rensburg, Henriette; Clark, Damien; Harreveld, R. E.; Beer, Colin; Danaher, P. A.

    2015-01-01

    The article on which this paper reflects ["Exploring a Cross-Institutional Research Collaboration and Innovation: Deploying Social Software and Web 2.0 Technologies to Investigate Online Learning Designs and Interactions in Two Australian Universities"] presented elements of a research project investigating learning interactions in…

  1. Whole Tumor Histogram-profiling of Diffusion-Weighted Magnetic Resonance Images Reflects Tumorbiological Features of Primary Central Nervous System Lymphoma.

    Science.gov (United States)

    Schob, Stefan; Münch, Benno; Dieckow, Julia; Quäschling, Ulf; Hoffmann, Karl-Titus; Richter, Cindy; Garnov, Nikita; Frydrychowicz, Clara; Krause, Matthias; Meyer, Hans-Jonas; Surov, Alexey

    2018-04-01

    Diffusion weighted imaging (DWI) quantifies motion of hydrogen nuclei in biological tissues and hereby has been used to assess the underlying tissue microarchitecture. Histogram-profiling of DWI provides more detailed information on diffusion characteristics of a lesion than the standardly calculated values of the apparent diffusion coefficient (ADC)-minimum, mean and maximum. Hence, the aim of our study was to investigate, which parameters of histogram-profiling of DWI in primary central nervous system lymphoma can be used to specifically predict features like cellular density, chromatin content and proliferative activity. Pre-treatment ADC maps of 21 PCNSL patients (8 female, 13 male, 28-89 years) from a 1.5T system were used for Matlab-based histogram profiling. Results of histopathology (H&E staining) and immunohistochemistry (Ki-67 expression) were quantified. Correlations between histogram-profiling parameters and neuropathologic examination were calculated using SPSS 23.0. The lower percentiles (p10 and p25) showed significant correlations with structural parameters of the neuropathologic examination (cellular density, chromatin content). The highest percentile, p90, correlated significantly with Ki-67 expression, resembling proliferative activity. Kurtosis of the ADC histogram correlated significantly with cellular density. Histogram-profiling of DWI in PCNSL provides a comprehensible set of parameters, which reflect distinct tumor-architectural and tumor-biological features, and hence, are promising biomarkers for treatment response and prognosis. Copyright © 2018. Published by Elsevier Inc.

  2. Design and fabrication of continuous-profile diffractive micro-optical elements as a beam splitter.

    Science.gov (United States)

    Feng, Di; Yan, Yingbai; Jin, Guofan; Fan, Shoushan

    2004-10-10

    An optimization algorithm that combines a rigorous electromagnetic computation model with an effective iterative method is utilized to design diffractive micro-optical elements that exhibit fast convergence and better design quality. The design example is a two-dimensional 1-to-2 beam splitter that can symmetrically generate two focal lines separated by 80 microm at the observation plane with a small angle separation of +/- 16 degrees. Experimental results are presented for an element with continuous profiles fabricated into a monocrystalline silicon substrate that has a width of 160 microm and a focal length of 140 microm at a free-space wavelength of 10.6 microm.

  3. Reflection in Learning through a Self-monitoring Device: Design Research on EEG Self-Monitoring during a Study Session

    Directory of Open Access Journals (Sweden)

    Eva Durall

    2017-04-01

    Full Text Available The increasing availability of self-monitoring technologies has created opportunities for gaining awareness about one’s own behavior and reflecting on it. In teaching and learning, there is interest in using self-monitoring technologies, but very few studies have explored the possibilities. In this paper, we present a design study that investigates a technology (called Feeler that guides students to follow a specific learning script, monitors changes in their electroencephalogram (EEG while studying, and later provides visualization of the EEG data. The results are two-fold: (1 the hardware/software prototype and (2 the conclusions from the proof-of-concept research conducted with the prototype and six participants. In the research, we collected qualitative data from interviews to identify whether the prototype supported students to develop their reflective skills. The thematic analysis of the interviews showed that the Feeler’s learning script and visualization of the EEG data supported greater levels of reflection by fostering students’ curiosity, puzzlement, and personal inquiry. The proof-of-concept research also provided insights into several factors, such as the value of personal experience, the challenge of assumptions, and the contextualization of the data that trigger reflective thinking. The results validate the design concept and the role of the prototype in supporting awareness of and reflection about students’ mental states when they perform academic tasks.

  4. Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others.

  5. Items to be reflected to the nuclear power safety measures in Japan (concerning the examination, design and operation management) (excluding the items to be reflected to the standards)

    International Nuclear Information System (INIS)

    1980-01-01

    In connection with the Three Mile Island nuclear power accident in March, 1979, in the United States, in order to introduce the lessons from it in the nuclear power safety regulations in Japan, 52 items to be reflected to the nuclear power safety measures were chosen by the Nuclear Safety Commission. Of these, 16 items were examined by the Committee on Examination of Reactor Safety. It was decided that these results would be introduced in the nuclear safety regulations, by the Nuclear Safety Commission. The following 16 items are described. For the examination, four items concerning the automatic operation of safety systems and others; for the design, five items concerning a small rupture accident, the monitoring of the state of primary coolant, control room layout and others; for the operation management, seven items concerning the inspection at the time of repair, the prevention of faulty handlings by operators and others. (J.P.N.)

  6. Geological affinity of reflecting boundaries in the intermediate structural stage of the Chu Sarysuyskiy depression based on results of vertical seismic profilling

    Energy Technology Data Exchange (ETDEWEB)

    Davydov, N.G.; Kiselevskiy, Yu.N.

    1983-01-01

    A computer (EVM) and an ASOI-VSP-SK program complex are used to analyze data from seismic exploration and acoustical logging with interval by interval calculation of the velocity every four meters. Vertical seismic profilling (VSP) results are used to identify all the upper layers as reference layers. The basic reference level, the third, which corresponds to the floor of the carbonate middle to upper Visean series, is not sustained due to the thin layered state of the terrigeneous section. Based on data from vertical seismic profilling, the reflected wave method (MOV) and the common depth point method (MOGT), the reference 3-a and 6-a levels are identified. Deep reflections of the seventh, 7-a and Rf, approximately confined to the roof and floor of the lower Paleozoic deposits and the upper part of the upper reef series, are noted in the series of the Caledonian cap of the Prebaykal massifs based on vertical seismic profilling. Collector levels are noted on the basis of the frequency of the wave spectra and from the absorption coefficient in the Testas structure and in other low amplitude structures. The insufficiency of the depth capability of the common depth point method and the poor knowledge level of seismic exploration of the section of the lower Paleozoa and the upper Proterozoa of the Chu Sarysuyskiy depresion are noted.

  7. OPTIMIZATION OF I-SECTION PROFILE DESIGN BY THE FINITE ELEMENT METHOD

    Directory of Open Access Journals (Sweden)

    Patryk Różyło

    2016-03-01

    Full Text Available This paper discusses the problem of design optimization for an I-section profile. The optimization process was performed using the Abaqus program. The numerical analysis of a strictly static problem was based on the finite element method. The scope of the analysis involved both determination of stresses and displacements in the profile and structure topology optimization. The main focus of the numerical analysis was put on reducing profile volume while maintaining the same load and similar stresses prior to and after optimization. The solution of the optimization problem is just an example of the potential of using this method in combination with the finite element method in the Abaqus environment. Nowadays numerical analysis is the most effective cost-reducing alternative to experimental tests and it enables structure examination by means of a computer.

  8. Package design and nutritional profile of foods targeted at children in supermarkets in Montevideo, Uruguay.

    Science.gov (United States)

    Giménez, Ana; Saldamando, Luis de; Curutchet, María Rosa; Ares, Gastón

    2017-06-12

    Marketing of unhealthy products has been identified as one of the main characteristics of the food environment that negatively affects children's eating patterns. Restrictions on advertising of unhealthy foods to children have already been imposed in different countries. However, marketing strategies are not limited to broadcast and digital advertising, but also include package design. In this context, the current study aimed to describe the food products targeted at children and sold in supermarkets in Montevideo, Uruguay, in terms of package design and nutrient profile. Two supermarkets in Montevideo were selected for data collection. In each supermarket, all products targeted at children were identified. Products were analyzed in terms of package design and nutritional profile, considering the Pan American Health Organization Nutrient Profile Model. A total of 180 unique products were identified, which included a wide range of product categories. The great majority of the products corresponded to ultra-processed products with excessive amounts of sodium, free sugars, total fat, saturated fat, and/or trans fat, which are not recommended for frequent consumption. Several marketing strategies were identified in the design of packages to attract children's attention and drive their preferences. The most common strategies were the inclusion of cartoon characters, bright colors, childish lettering, and a wide range of claims related to health and nutrition, as well as the products' sensory and hedonic characteristics. The study's findings provide additional evidence on the need to regulate packaging of products targeted at children.

  9. Package design and nutritional profile of foods targeted at children in supermarkets in Montevideo, Uruguay

    Directory of Open Access Journals (Sweden)

    Ana Giménez

    Full Text Available Abstract: Marketing of unhealthy products has been identified as one of the main characteristics of the food environment that negatively affects children’s eating patterns. Restrictions on advertising of unhealthy foods to children have already been imposed in different countries. However, marketing strategies are not limited to broadcast and digital advertising, but also include package design. In this context, the current study aimed to describe the food products targeted at children and sold in supermarkets in Montevideo, Uruguay, in terms of package design and nutrient profile. Two supermarkets in Montevideo were selected for data collection. In each supermarket, all products targeted at children were identified. Products were analyzed in terms of package design and nutritional profile, considering the Pan American Health Organization Nutrient Profile Model. A total of 180 unique products were identified, which included a wide range of product categories. The great majority of the products corresponded to ultra-processed products with excessive amounts of sodium, free sugars, total fat, saturated fat, and/or trans fat, which are not recommended for frequent consumption. Several marketing strategies were identified in the design of packages to attract children’s attention and drive their preferences. The most common strategies were the inclusion of cartoon characters, bright colors, childish lettering, and a wide range of claims related to health and nutrition, as well as the products’ sensory and hedonic characteristics. The study’s findings provide additional evidence on the need to regulate packaging of products targeted at children.

  10. Embracing Social Sustainability in Design Education: A Reflection on a Case Study in Haiti

    Science.gov (United States)

    Kjøllesdal, Anders; Asheim, Jonas; Boks, Casper

    2014-01-01

    Sustainable design issues are complex and multi-faceted and need integration in the education of young designers. Current research recommends a holistic view based on problem-solving and inter-disciplinary work, yet few design educators have brought these ideas to their full consequence. Sustainability education for designers is still often rooted…

  11. Elicitation of situated values : Need for tools to help stakeholders and designers to reflect and communicate

    NARCIS (Netherlands)

    Pommeranz, A.; Detweiler, C.; Wiggers, P.; Jonker, C.

    2012-01-01

    Explicitly considering human values in the design process of socio-technical systems has become a responsibility of designers. It is, however, challenging to design for values because (1) relevant values must be identified and communicated between all stakeholders and designers and (2) stakeholders’

  12. Service design as an approach to new service development : reflections and futures studies

    OpenAIRE

    Yu, Eun; Sangiorgi, Daniela

    2014-01-01

    This paper illustrates how, although Service Design has been described as evolving from a narrow description of a phase in New Service Development (NSD) to an approach to Service Innovation, the current Service Design research is still focused on the initial stages of NSD. Comparing existing Service Design research with foundational knowledge on NSD, the authors have proposed two complementary directions for future Service Design studies: 1) the expansion of ‘service design as a phase’ to inv...

  13. Profile constructing and elevation design of soil reclaimed by hydraulic dredge pump in mining areas

    Energy Technology Data Exchange (ETDEWEB)

    Longqian, C.; Aiqin, S.; Tianjian, Z. [China Univ. of Mining and Technology, Xuzhou, Jiangsu (China). School of Environmental Science and Spatial Informatics; Mei, L. [China Univ. of Mining and Technology, Xuzhou, Jiangsu (China)

    2007-07-01

    Underground coal mining is the main method of coal mining in China. The hydraulic dredge pump reclamation method is the basic method used for repairing hydraulic erosion. This paper reviewed land reclamation by hydraulic dredge pump in the Yi'an coal mine of Xuzhou mining area in the east of China, and analyzed the constructing theory of soil profiling. It examined factors such as the height of the ground-water table; the thickness of plough horizon; the length of crops root and the state of soil erosion; and the methods of profile construction and elevation design of soil reclaimed by hydraulic dredge pump. A relevant mathematical model was also developed. The paper discussed the general situation of the study site as well as the basic theory of profile constructing and the profile constructing method. The paper also discussed the elevation design of the reclaimed land. It was concluded that the practice has proved that the methods can make the reclaimed soil keep a similar characteristics to that of original cropped soil, and meet the requirements for elevation of reclaimed land. 8 refs., 1 tab., 2 figs.

  14. An Empirical Assessment of Metaphor Use in the Design Studio: Analysis, Reflection and Restructuring of Architectural Design

    Science.gov (United States)

    Casakin, Hernan

    2012-01-01

    This investigation was concerned with the use of metaphors in architectural design education. Reasoning by means of metaphors helps to understand a design situation in terms of a remote concept normally not associated with it. By juxtaposing the known with the unknown in an unusual way, metaphors can enhance design problem solving. The goal of…

  15. The Consumer Behavior Challenge: Designing an Assignment to Motivate Student Reflection and Self-Growth

    Science.gov (United States)

    Gravois, Renée; Lopez, Tará Burnthorne; Budden, Michael C.

    2017-01-01

    The tension caused by change pushes students to reflect on their new situation, examine preconceived ideas, and synthesize new with existing knowledge. In the Consumer Behavior Challenge, students are challenged to step outside of their comfort zone by changing a behavior or trying something new for a period of time. Through guided reflection…

  16. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI

    Directory of Open Access Journals (Sweden)

    C. Gutt

    2017-09-01

    Full Text Available We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q-resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Qz, we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  17. Creating Evaluation Profiles for Games Designed to be Fun: An Interpretive Framework for Serious Game Mechanics

    DEFF Research Database (Denmark)

    Ulrich, Frank; Helms, Niels Henrik

    2017-01-01

    an interpretive evaluation framework that can identify the educational value in COTS games. Application. The presented framework can create evaluative profiles of the learning, social, game, and immersive mechanics of COTS games as educational tools. Moreover, the framework can position COTS games between four...... intertwined dimensions, namely pedagogical, design, knowledge, and sociotechnical considerations. Demonstration. To validate the practical application of the interpretive framework, we apply it to a real-world example. Our demonstration reveals the usefulness of the framework. Conclusions. The framework...

  18. From products to services : reflections on the challenges in designing for services

    NARCIS (Netherlands)

    Bhomer, ten M.; De Lille, C. S. H.; Tomico, O.; Kleinsmann, M.S.

    2013-01-01

    In this paper we will point to implications for designers who support organizations in the transition process from products to services based business models. These implications are based on four important challenges when designing for services: the designerly mindset, collaboration, empathy with

  19. Physical, biological, and chemical data from radiometer, profiling reflectance radiometer, and CTD casts in a world-wide distribution as part of the SeaWiFS/SIMBIOS project from 13 September 1981 to 16 December 1999 (NODC Accession 0000632)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, biological, and chemical data were collected using radiometer, profiling reflectance radiometer, and CTD casts in a world-wide distribution from 13...

  20. Emulation and design of terahertz reflection-mode confocal scanning microscopy based on virtual pinhole

    Science.gov (United States)

    Yang, Yong-fa; Li, Qi

    2014-12-01

    In the practical application of terahertz reflection-mode confocal scanning microscopy, the size of detector pinhole is an important factor that determines the performance of spatial resolution characteristic of the microscopic system. However, the use of physical pinhole brings some inconvenience to the experiment and the adjustment error has a great influence on the experiment result. Through reasonably selecting the parameter of matrix detector virtual pinhole (VPH), it can efficiently approximate the physical pinhole. By using this approach, the difficulty of experimental calibration is reduced significantly. In this article, an imaging scheme of terahertz reflection-mode confocal scanning microscopy that is based on the matrix detector VPH is put forward. The influence of detector pinhole size on the axial resolution of confocal scanning microscopy is emulated and analyzed. Then, the parameter of VPH is emulated when the best axial imaging performance is reached.

  1. From collection to reflection : on designing Freed, a tool for free and flexible organization of designers' digital work

    NARCIS (Netherlands)

    Mendels, P.

    2013-01-01

    Designers collect a lot of information during the design process, such as background research, ideas, notes, sketches, photos, videos and feedback from various stakeholders. A large part of this information gets lost in folders on individual computers, inside documents and presentations, or on pages

  2. FEM BASED PARAMETRIC DESIGN STUDY OF TIRE PROFILE USING DEDICATED CAD MODEL AND TRANSLATION CODE

    Directory of Open Access Journals (Sweden)

    Nikola Korunović

    2014-12-01

    Full Text Available In this paper a finite element method (FEM based parametric design study of the tire profile shape and belt width is presented. One of the main obstacles that similar studies have faced is how to change the finite element mesh after a modification of the tire geometry is performed. In order to overcome this problem, a new approach is proposed. It implies automatic update of the finite elements mesh, which follows the change of geometric design parameters on a dedicated CAD model. The mesh update is facilitated by an originally developed mapping and translation code. In this way, the performance of a large number of geometrically different tire design variations may be analyzed in a very short time. Although a pilot one, the presented study has also led to the improvement of the existing tire design.

  3. Control sample design using a geodemographic discriminator: An application of Super Profiles

    Science.gov (United States)

    Brown, Peter J. B.; McCulloch, Peter G.; Williams, Evelyn M. I.; Ashurst, Darren C.

    The development and application of an innovative sampling framework for use in a British study of the early detection of gastric cancer are described. The Super Profiles geodemographic discriminator is used in the identification of geographically distinct control and contrast areas from which samples of cancer registry case records may be drawn for comparison with the records of patients participating in the gastric cancer intervention project. Preliminary results of the application of the framework are presented and confirm its effectiveness in satisfactorily reflecting known patterns of variation in cancer occurrence by age, gender and social class. The method works well for cancers with a known and clear social gradient, such as lung and breast cancer, moderately well for gastric cancer and somewhat less well for oesophageal cancer, where the social class gradient is less clear.

  4. Research in architecture : reflection on three approaches linking research and design

    NARCIS (Netherlands)

    Colenbrander, B.J.F.; Pereira Roders, A.R.; Veldpaus, L.; Fidanoglu, Esra

    2013-01-01

    Research in Architecture is not new, it is usually known as analysis or pre-design stage. Architects get acquainted with program requirements, project context and/or other inspiring works, including concepts on theory, philosophy or history. Seldom are the architects who design without any

  5. Self-reflection on personal values to support value-sensitive design

    NARCIS (Netherlands)

    Pommeranz, A.; Detweiler, C.A.; Wiggers, P.; Jonker, C.M.

    2011-01-01

    The impact of ubiquitous technology and social media on our lives is rapidly increasing. We explicitly need to consider personal values affected or violated by these systems. Value-sensitive design can guide a designer in building systems that account for human values. However, the framework lacks

  6. Designing Inclusive Reflective Learning with Digital Democratic Dialogue Across Boundaries and Diversities

    DEFF Research Database (Denmark)

    Sorensen, Elsebeth Korsgaard; Brooks, Eva Irene

    2018-01-01

    and structuring the “walls” of a digital learning architecture condusive to the establishment of a social, inclusive, empowering and interactive learning climate online. It makes a plea for using an approach of dialogic design with meta-structures in the communicative fora in order to promote inclusiveness......This paper deals with the challenge of designing online learning architectures for master students. From different theoretical concepts and with a netnographic methodological research approach, the paper discusses theoretical concepts, challenges and mechanisms significant to designing...

  7. The Design of Ocean Turbulence Measurement with a Free Fall Vertical Profiler

    Science.gov (United States)

    Luan, Xin; Xin, Jia; Zhu, Tieyi; Yang, Hua; Teng, Yuru; Song, Dalei

    2018-03-01

    The newly designed instrument Free Fall Vertical Profiler (FFVP) developed by Ocean University of China (OUC) had been deployed in the Western Pacific in March 08, 2017 and succeed to collect turbulence signals about 350-m-deep water. According to the requirements of turbulence measurement, the mechanical design was developed for turbulence platform to achieve stability and good flow tracking. By analysing the Heading, Pitch and Roll, the results suggested that the platform satisfies the requirements of stability. The power spectrum of the cleaned shear signals using the noise correction algorithm match well with the theoretical Nasmyth spectrum and the rate of turbulence dissipation are approximately 10-8 W/kg. In general, the FFVP was rationally designed and provided a good measurement platform for turbulence observation.

  8. Designing for Scale: Reflections on Rolling Out Reading Improvement in Kenya and Liberia.

    Science.gov (United States)

    Gove, Amber; Korda Poole, Medina; Piper, Benjamin

    2017-03-01

    Since 2008, the Ministries of Education in Liberia and Kenya have undertaken transitions from small-scale pilot programs to improve reading outcomes among primary learners to the large-scale implementation of reading interventions. The effects of the pilots on learning outcomes were significant, but questions remained regarding whether such large gains could be sustained at scale. In this article, the authors dissect the Liberian and Kenyan experiences with implementing large-scale reading programs, documenting the critical components and conditions of the program designs that affected the likelihood of successfully transitioning from pilot to scale. They also review the design, deployment, and effectiveness of each pilot program and the scale, design, duration, enabling conditions, and initial effectiveness results of the scaled programs in each country. The implications of these results for the design of both pilot and large-scale reading programs are discussed in light of the experiences of both the Liberian and Kenyan programs. © 2017 Wiley Periodicals, Inc.

  9. Reflections on designing and implementing a task-based unit using gamebooks

    OpenAIRE

    Branden, KIRCHMEYER; Sarah FAHERTY\

    2017-01-01

    A small scale action-research project was designed to explore the effectiveness of using interactive narratives to facilitate L2 output in a communicative English class. A four-week unit of instruction was implemented across five classes comprised of non-English major students at a university in Japan. Using graded reader gamebooks from the Atama-ii series, activities were designed to simultaneously engage students in English reading while also promoting active discussion in English. Data was...

  10. Core/shell PLGA microspheres with controllable in vivo release profile via rational core phase design.

    Science.gov (United States)

    Yu, Meiling; Yao, Qing; Zhang, Yan; Chen, Huilin; He, Haibing; Zhang, Yu; Yin, Tian; Tang, Xing; Xu, Hui

    2018-02-27

    Highly soluble drugs tend to release from preparations at high speeds, which make them need to be taken at frequent intervals. Additionally, some drugs need to be controlled to release in vivo at certain periods, so as to achieve therapeutic effects. Thus, the objective of this study is to design injectable microparticulate systems with controllable in vivo release profile. Biodegradable PLGA was used as the matrix material to fabricate microspheres using the traditional double emulsification-solvent evaporation method as well as improved techniques, with gel (5% gelatine or 25% F127) or LP powders as the inner phases. Their physicochemical properties were systemically investigated. Microspheres prepared by modified methods had an increase in drug loading (15.50, 16.72, 15.66%, respectively) and encapsulation efficiencies (73.46, 79.42, 74.40%, respectively) when compared with traditional methods (12.01 and 57.06%). The morphology of the particles was characterized by optical microscope (OM) and scanning electron microscopy (SEM), and the amorphous nature of the encapsulated drug was confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. To evaluate their release behaviour, the in vitro degradation, in vitro release and in vivo pharmacodynamics were subsequently studied. Traditional microspheres prepared in this study with water as the inner phase had a relatively short release period within 16 d when compared with modified microspheres with 5% gelatine as the inner phase, which resulted in a smooth release profile and appropriate plasma LP concentrations over 21 d. Thus this type of modified microspheres can be better used in drugs requiring sustained release. The other two formulations containing 25% F127 and LP micropowders presented two-stage release profiles, resulting in fluctuant plasma LP concentrations which may be suitable for drugs requiring controlled release. All the results suggested that drug release rates from

  11. New geometric design consistency model based on operating speed profiles for road safety evaluation.

    Science.gov (United States)

    Camacho-Torregrosa, Francisco J; Pérez-Zuriaga, Ana M; Campoy-Ungría, J Manuel; García-García, Alfredo

    2013-12-01

    To assist in the on-going effort to reduce road fatalities as much as possible, this paper presents a new methodology to evaluate road safety in both the design and redesign stages of two-lane rural highways. This methodology is based on the analysis of road geometric design consistency, a value which will be a surrogate measure of the safety level of the two-lane rural road segment. The consistency model presented in this paper is based on the consideration of continuous operating speed profiles. The models used for their construction were obtained by using an innovative GPS-data collection method that is based on continuous operating speed profiles recorded from individual drivers. This new methodology allowed the researchers to observe the actual behavior of drivers and to develop more accurate operating speed models than was previously possible with spot-speed data collection, thereby enabling a more accurate approximation to the real phenomenon and thus a better consistency measurement. Operating speed profiles were built for 33 Spanish two-lane rural road segments, and several consistency measurements based on the global and local operating speed were checked. The final consistency model takes into account not only the global dispersion of the operating speed, but also some indexes that consider both local speed decelerations and speeds over posted speeds as well. For the development of the consistency model, the crash frequency for each study site was considered, which allowed estimating the number of crashes on a road segment by means of the calculation of its geometric design consistency. Consequently, the presented consistency evaluation method is a promising innovative tool that can be used as a surrogate measure to estimate the safety of a road segment. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Design of the beam profile monitor system for the RHIC injection line

    International Nuclear Information System (INIS)

    Witkover, R.L.

    1995-01-01

    A video profile monitor (VPM) system will be used in the AGS-to-RHIC (ATR) transfer line to acquire single bunches transferred at 30 Hz. An array of 12 video cameras will be connected to 4 frame grabbers through a wide-band flux. Fast VME image processing boards will analyze a 120 x 120 subset of the image, generated by a 4 x 4 convolution or an ROI computation and sent over the network during the AGS recycle time. Details of the design, results of lab tests and studies with ion and proton beams will be presented

  13. Rethinking Race and Power in Design-Based Research: Reflections from the Field

    Science.gov (United States)

    Vakil, Sepehr; McKinney de Royston, Maxine; Suad Nasir, Na'ilah; Kirshner, Ben

    2016-01-01

    Participatory design-based research continues to expand and challenge the "researcher" and "researched" paradigm by incorporating teachers, administrators, community members, and youth throughout the research process. Yet, greater clarity is needed about the racial and political dimensions of these collaborative research…

  14. Design and verification of the miniature optical system for small object surface profile fast scanning

    Science.gov (United States)

    Chi, Sheng; Lee, Shu-Sheng; Huang, Jen, Jen-Yu; Lai, Ti-Yu; Jan, Chia-Ming; Hu, Po-Chi

    2016-04-01

    As the progress of optical technologies, different commercial 3D surface contour scanners are on the market nowadays. Most of them are used for reconstructing the surface profile of mold or mechanical objects which are larger than 50 mm×50 mm× 50 mm, and the scanning system size is about 300 mm×300 mm×100 mm. There are seldom optical systems commercialized for surface profile fast scanning for small object size less than 10 mm×10 mm×10 mm. Therefore, a miniature optical system has been designed and developed in this research work for this purpose. Since the most used scanning method of such system is line scan technology, we have developed pseudo-phase shifting digital projection technology by adopting projecting fringes and phase reconstruction method. A projector was used to project a digital fringe patterns on the object, and the fringes intensity images of the reference plane and of the sample object were recorded by a CMOS camera. The phase difference between the plane and object can be calculated from the fringes images, and the surface profile of the object was reconstructed by using the phase differences. The traditional phase shifting method was accomplished by using PZT actuator or precisely controlled motor to adjust the light source or grating and this is one of the limitations for high speed scanning. Compared with the traditional optical setup, we utilized a micro projector to project the digital fringe patterns on the sample. This diminished the phase shifting processing time and the controlled phase differences between the shifted phases become more precise. Besides, the optical path design based on a portable device scanning system was used to minimize the size and reduce the number of the system components. A screwdriver section about 7mm×5mm×5mm has been scanned and its surface profile was successfully restored. The experimental results showed that the measurement area of our system can be smaller than 10mm×10mm, the precision reached to

  15. Plasma metabolomic profiles reflective of glucose homeostasis in non-diabetic and type 2 diabetic obese African-American women.

    Directory of Open Access Journals (Sweden)

    Oliver Fiehn

    2010-12-01

    Full Text Available Insulin resistance progressing to type 2 diabetes mellitus (T2DM is marked by a broad perturbation of macronutrient intermediary metabolism. Understanding the biochemical networks that underlie metabolic homeostasis and how they associate with insulin action will help unravel diabetes etiology and should foster discovery of new biomarkers of disease risk and severity. We examined differences in plasma concentrations of >350 metabolites in fasted obese T2DM vs. obese non-diabetic African-American women, and utilized principal components analysis to identify 158 metabolite components that strongly correlated with fasting HbA1c over a broad range of the latter (r = -0.631; p<0.0001. In addition to many unidentified small molecules, specific metabolites that were increased significantly in T2DM subjects included certain amino acids and their derivatives (i.e., leucine, 2-ketoisocaproate, valine, cystine, histidine, 2-hydroxybutanoate, long-chain fatty acids, and carbohydrate derivatives. Leucine and valine concentrations rose with increasing HbA1c, and significantly correlated with plasma acetylcarnitine concentrations. It is hypothesized that this reflects a close link between abnormalities in glucose homeostasis, amino acid catabolism, and efficiency of fuel combustion in the tricarboxylic acid (TCA cycle. It is speculated that a mechanism for potential TCA cycle inefficiency concurrent with insulin resistance is "anaplerotic stress" emanating from reduced amino acid-derived carbon flux to TCA cycle intermediates, which if coupled to perturbation in cataplerosis would lead to net reduction in TCA cycle capacity relative to fuel delivery.

  16. Surface topography to reflectivity mapping in two-dimensional photonic crystals designed in germanium

    Energy Technology Data Exchange (ETDEWEB)

    Husanu, M.A.; Ganea, C.P. [National Institute of Materials Physics, Atomistilor 105b, 077125 Magurele, Ilfov (Romania); Anghel, I. [National Institute for Laser, Plasma & Radiation Physics, Atomistilor 409, 077125 Magurele (Romania); University of Bucharest, Faculty of Physics, Atomistilor 405, 077125 Magurele (Romania); Florica, C.; Rasoga, O. [National Institute of Materials Physics, Atomistilor 105b, 077125 Magurele, Ilfov (Romania); Popescu, D.G., E-mail: dana.popescu@infim.ro [National Institute of Materials Physics, Atomistilor 105b, 077125 Magurele, Ilfov (Romania)

    2015-11-15

    Highlights: • Laser ablation is used for drilling a periodic 2D photonic structure. • Confinement of radiation is revealed by infra-red spectromicroscopy correlated with numerical calculations. • Telecommunication range is accessible upon tuning conveniently the processing parameters. - Abstract: Light confinement in a two dimensional photonic crystal (2D PhC) with hexagonal symmetry is studied using infra-red reflectance spectromicroscopy and numerical calculations. The structure has been realized by laser ablation, using a pulsed laser (λ = 775 nm), perforating an In-doped Ge wafer and creating a lattice of holes with well-defined symmetry. Correlating the spectral signature of the photonic gaps recorded experimentally with the results obtained in the finite difference time domain and finite difference frequency domain calculations, we established the relationship between the geometric parameters of the structure (lattice constants, shape of the hole) and its efficiency in trapping and guiding the radiation in a well-defined frequency range. Besides the gap in the low energy range of transversal electric modes, a second one is identified in the telecommunication range, originating in the localization of the leaky modes within the radiation continuum. The emerging picture is of a device with promising characteristics as an alternative to Si-based technology in photonic device fabrication with special emphasize in energy storage and conversion.

  17. Design of ultrathin dual-resonant reflective polarization converter with customized bandwidths

    Science.gov (United States)

    Kundu, Debidas; Mohan, Akhilesh; Chakrabarty, Ajay

    2017-10-01

    In this paper, an ultrathin dual-resonant reflective polarization converter is proposed to obtain customized bandwidths using precise space-filling technique to its top geometry. The unit cell of the dual-resonant prototype consists of conductive square ring with two diagonally arranged slits, supported by metal-backed thin dielectric layer. It offers two narrow bands with fractional bandwidths of 3.98 and 6.65% and polarization conversion ratio (PCR) of 97.16 and 98.87% at 4.52 and 6.97 GHz, respectively. The resonances are brought in proximity to each other by changing the length of surface current paths of the two resonances. By virtue of this mechanism, two polarization converters with two different types of bandwidths are obtained. One polarization converter produces a full-width at half-maxima PCR bandwidth of 34%, whereas another polarization converter produces a 90% PCR bandwidth of 19%. All the proposed polarization converters are insensitive to wide variations of incident angle for both TE- and TM-polarized incident waves. Measured results show good agreement with the numerically simulated results.

  18. Aspects of the Quaternary evolution of the Southern Kattegat and the central North Sea based on interpretation of 2D and 3D marine reflection seismic profiles

    DEFF Research Database (Denmark)

    Bendixen, Carina

    In this PhD study interpretation of 2D shallow seismic data in the Kattegat region (Pinger, Sparker and Innomar parametric sub-bottom profiler), 3D conventional seismic data in the central North Sea, combined with sediment core interpretation and radiocarbon dating has been carried out in order...... to outline the geological development of the southwestern part of the Kattegat region, from the Late Weichselian to Early Holocene and to investigate the potential of using 3D seismic in Quaternary geology. Within the study area of the Kattegat region Late Weichselian (Lateglacial - LG) sediments...... are widespread and seen as semi-transparent reflections. The LG deposits drape the surface of the underlying till and were deposited during a period of relative high sea level (highstand system tract). The following postglacial (PG - Holocene) sediments represent a full depositional sequence including lowstand...

  19. Tourism, technology and narratives: Reflections for the design of tourist spaces

    OpenAIRE

    de Villasante García, Rafael; Casellas Oriol, Sílvia

    2017-01-01

    We characterize tourism essentially as a phenomenon of communication between architecture, a territory, a space and its visitors. The design of tourist spaces has evolved over time, according to the technologies used to build them. The emergence of new technologies enables new interactions with our environment and a constant connection with sources of information, in addition to geo-location and augmented reality. These are technologies that are re-configuring the tourist space and, therefore...

  20. Evaluation of 1H NMR metabolic profiling using biofluid mixture design.

    Science.gov (United States)

    Athersuch, Toby J; Malik, Shahid; Weljie, Aalim; Newton, Jack; Keun, Hector C

    2013-07-16

    A strategy for evaluating the performance of quantitative spectral analysis tools in conditions that better approximate background variation in a metabonomics experiment is presented. Three different urine samples were mixed in known proportions according to a {3, 3} simplex lattice experimental design and analyzed in triplicate by 1D (1)H NMR spectroscopy. Fifty-four urinary metabolites were subsequently quantified from the sample spectra using two methods common in metabolic profiling studies: (1) targeted spectral fitting and (2) targeted spectral integration. Multivariate analysis using partial least-squares (PLS) regression showed the latent structure of the spectral set recapitulated the experimental mixture design. The goodness-of-prediction statistic (Q(2)) of each metabolite variable in a PLS model was calculated as a metric for the reliability of measurement, across the sample compositional space. Several metabolites were observed to have low Q(2) values, largely as a consequence of their spectral resonances having low s/n or strong overlap with other sample components. This strategy has the potential to allow evaluation of spectral features obtained from metabolic profiling platforms in the context of the compositional background found in real biological sample sets, which may be subject to considerable variation. We suggest that it be incorporated into metabolic profiling studies to improve the estimation of matrix effects that confound accurate metabolite measurement. This novel method provides a rational basis for exploiting information from several samples in an efficient manner and avoids the use of multiple spike-in authentic standards, which may be difficult to obtain.

  1. The segmented non-uniform dielectric module design for uniformity control of plasma profile in a capacitively coupled plasma chamber

    International Nuclear Information System (INIS)

    Xia, Huanxiong; Xiang, Dong; Yang, Wang; Mou, Peng

    2014-01-01

    Low-temperature plasma technique is one of the critical techniques in IC manufacturing process, such as etching and thin-film deposition, and the uniformity greatly impacts the process quality, so the design for the plasma uniformity control is very important but difficult. It is hard to finely and flexibly regulate the spatial distribution of the plasma in the chamber via controlling the discharge parameters or modifying the structure in zero-dimensional space, and it just can adjust the overall level of the process factors. In the view of this problem, a segmented non-uniform dielectric module design solution is proposed for the regulation of the plasma profile in a CCP chamber. The solution achieves refined and flexible regulation of the plasma profile in the radial direction via configuring the relative permittivity and the width of each segment. In order to solve this design problem, a novel simulation-based auto-design approach is proposed, which can automatically design the positional sequence with multi independent variables to make the output target profile in the parameterized simulation model approximate the one that users preset. This approach employs an idea of quasi-closed-loop control system, and works in an iterative mode. It starts from initial values of the design variable sequences, and predicts better sequences via the feedback of the profile error between the output target profile and the expected one. It never stops until the profile error is narrowed in the preset tolerance

  2. Quantifying Reflection

    DEFF Research Database (Denmark)

    Alcock, Gordon Lindsay

    2013-01-01

    ´ These are all based on Blooms taxonomy and levels of competence and form a major part of individual student and group learning portfolios. Key Words :Project-Based learning, Reflective Portfolios, Self assessment, Defining learning gains, Developing learning strategies , Reflections on and for learning....... It contrasts the students’ self-assessment in a range of ‘product’ skills such as Revit, Structural Design, Mathematics of construction, Technical Installations; as well as ‘process’ competencies such as ‘Working in a team’, Sharing knowledge, Maintaining a portfolio and Reflecting ON learning and FOR learning......This paper documents 1st semester student reflections on “learning to learn” in a team-based PBL environment with quantitative and qualitative student reflective feedback on the learning gains of 60 Architectural Technology and Construction Management students at VIA University College, Denmark...

  3. Reflecting through the designing: a brief analysis of the teacher’s planning process

    Directory of Open Access Journals (Sweden)

    Francesca Anello

    2017-01-01

    Full Text Available The aim of this work is to study the conditions in which teachers plan and execute educational actions in the classroom and to find out which difficulties they encountered during the development of the planned teaching action. The “concrete operations” that 15 teachers in the Palermo area had accomplished, were highlighted before, during and after every structured activity to promote the pupils’ oral expression. Specifically, the research, which is collocated in the case study, had the function of verifying forty descriptors. These were grouped in the five cardinal points of the ADDIE model (Analysis, Design, Development, Implementation, Evaluation, with a motivated group of teachers that were formed during the action-research. To check intentions and behaviors of teachers, tools for self-analysis were built, individual notes and shared reports of the practice were used. The teachers found that the proposed projected device, initially, designed with 40 descriptors was not practical and chose only 20 of these. A simplified and flexible model is now available for the didactical preparation of the activities.Riflettere attraverso la progettazione: breve analisi del processo di programmazione didattica dell’insegnanteL’obiettivo del contributo è indagare le condizioni in cui gli insegnanti pianificano e realizzano un intervento in classe, e quali difficoltà incontrano nelle fasi di sviluppo dell’azione didattica programmata. Sono state evidenziate le “operazioni concrete” che 15 insegnanti del territorio di Palermo hanno compiuto prima, durante e dopo un’attività strutturata per promuovere negli alunni l’espressione orale. Nello specifico la ricerca, che si colloca nella tipologia dello studio di caso, si è occupata di verificare la funzionalità di 40 descrittori, raggruppati nei cinque punti cardine del modello ADDIE (Analysis, Design, Development, Implementation, Evaluation, con un gruppo motivato di insegnanti che si

  4. 024 PP: MEANINGFUL AND ENGAGING, OR TOKENISTIC? REFLECTIONS ON COLLABORATIVE ENGAGEMENT IN THE PROCESS OF DESIGNING SEXUAL HEALTH INTERVENTIONS

    Science.gov (United States)

    Boydell, N; McDaid, L

    2017-01-01

    Working with non-academic partners and including participants, and other stakeholders, in the design and delivery of research is emerging as a critical element in the field of health research. As researchers based in an interdisciplinary team with a focus on the development of sexual health interventions, we have long recognised that engagement with individuals and communities is a critical part of the research process, and actively sought out opportunities to collaborate with non-academic partners with a view to ensuring that our work is relevant in the ‘real-world’. While the increasing call for ‘collaboration’, ‘patient and public involvement’ and ‘co-production’ is welcome, we recognise the possibility that without critical reflection on the part of the research team, such engagement can lack meaning for those being asked to participate, potentially reducing its value and risking it being perceived as tokenistic. In this paper we reflect on our experiences as qualitative researchers for whom a key role in interdisciplinary research teams has been undertaking a number of ‘patient public involvement’ projects with both young people and gay, bisexual and other men who have sex with men (MSM) to inform the development of sexual health interventions. We critically reflect on some of the challenges and opportunities involved in this form of ‘consultation’, and explore the ethical implications of engaging stakeholders in identifying issues they consider important as part of the design and delivery of future interventions, but which may not be considered either a priority or feasible.

  5. Critical reflection and dialogical learning design: moving MOOCs beyond unidirectional transmission of content

    Directory of Open Access Journals (Sweden)

    Kim Haagen Mathiesen

    2016-11-01

    Over a 5 week period we conducted a netnographic (Kozinet, 2015 mixed methods research of the MOOC Blended Learning Essentials (https://www.futurelearn.com/courses/blended-learning-gettingstarted/2. Contrary to the acclaimed potentials of MOOCs, our research showed a pronounced lack of dialogue and a high degree of what Freire (1996 calls “the banking concept of education,” entailing a high amount of one-way knowledge transmission (Hoem, 2006. To circumvent these tendencies, the paper presents a case analysis and design framework for moving MOOCs beyond “the banking concept of education” and towards dialogue in ways that support critical thinking; a high-level cognitive skill essential to higher education (Laurillard, 2012.

  6. Conformational Profiling of the AT1 Angiotensin II Receptor Reflects Biased Agonism, G Protein Coupling, and Cellular Context.

    Science.gov (United States)

    Devost, Dominic; Sleno, Rory; Pétrin, Darlaine; Zhang, Alice; Shinjo, Yuji; Okde, Rakan; Aoki, Junken; Inoue, Asuka; Hébert, Terence E

    2017-03-31

    Here, we report the design and use of G protein-coupled receptor-based biosensors to monitor ligand-mediated conformational changes in receptors in intact cells. These biosensors use bioluminescence resonance energy transfer with Renilla luciferase (RlucII) as an energy donor, placed at the distal end of the receptor C-tail, and the small fluorescent molecule FlAsH as an energy acceptor, its binding site inserted at different positions throughout the intracellular loops and C-terminal tail of the angiotensin II type I receptor. We verified that the modifications did not compromise receptor localization or function before proceeding further. Our biosensors were able to capture effects of both canonical and biased ligands, even to the extent of discriminating between different biased ligands. Using a combination of G protein inhibitors and HEK 293 cell lines that were CRISPR/Cas9-engineered to delete Gα q , Gα 11 , Gα 12 , and Gα 13 or β-arrestins, we showed that Gα q and Gα 11 are required for functional responses in conformational sensors in ICL3 but not ICL2. Loss of β-arrestin did not alter biased ligand effects on ICL2P2. We also demonstrate that such biosensors are portable between different cell types and yield context-dependent readouts of G protein-coupled receptor conformation. Our study provides mechanistic insights into signaling events that depend on either G proteins or β-arrestin. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. Design of high-fidelity haptic display for one-dimensional force reflection applications

    Science.gov (United States)

    Gillespie, Brent; Rosenberg, Louis B.

    1995-12-01

    This paper discusses the development of a virtual reality platform for the simulation of medical procedures which involve needle insertion into human tissue. The paper's focus is the hardware and software requirements for haptic display of a particular medical procedure known as epidural analgesia. To perform this delicate manual procedure, an anesthesiologist must carefully guide a needle through various layers of tissue using only haptic cues for guidance. As a simplifying aspect for the simulator design, all motions and forces involved in the task occur along a fixed line once insertion begins. To create a haptic representation of this procedure, we have explored both physical modeling and perceptual modeling techniques. A preliminary physical model was built based on CT-scan data of the operative site. A preliminary perceptual model was built based on current training techniques for the procedure provided by a skilled instructor. We compare and contrast these two modeling methods and discuss the implications of each. We select and defend the perceptual model as a superior approach for the epidural analgesia simulator.

  8. A design procedure for an acoustic mirror providing dual reflection of longitudinal and shear waves in Solidly Mounted BAW Resonators (SMRs)

    NARCIS (Netherlands)

    Jose, Sumy; Jansman, Andreas; Hueting, Raymond Josephus Engelbart

    The quality factor of the traditional Solidly Mounted Resonator (SMR) is limited by substrate losses, as the traditionally employed acoustic mirror reflects longitudinal waves but not shear waves. Modern mirrors do reflect both waves, but design rules for such mirrors have not been published so far.

  9. Hardware-Efficient Design of Real-Time Profile Shape Matching Stereo Vision Algorithm on FPGA

    Directory of Open Access Journals (Sweden)

    Beau Tippetts

    2014-01-01

    Full Text Available A variety of platforms, such as micro-unmanned vehicles, are limited in the amount of computational hardware they can support due to weight and power constraints. An efficient stereo vision algorithm implemented on an FPGA would be able to minimize payload and power consumption in microunmanned vehicles, while providing 3D information and still leaving computational resources available for other processing tasks. This work presents a hardware design of the efficient profile shape matching stereo vision algorithm. Hardware resource usage is presented for the targeted micro-UV platform, Helio-copter, that uses the Xilinx Virtex 4 FX60 FPGA. Less than a fifth of the resources on this FGPA were used to produce dense disparity maps for image sizes up to 450 × 375, with the ability to scale up easily by increasing BRAM usage. A comparison is given of accuracy, speed performance, and resource usage of a census transform-based stereo vision FPGA implementation by Jin et al. Results show that the profile shape matching algorithm is an efficient real-time stereo vision algorithm for hardware implementation for resource limited systems such as microunmanned vehicles.

  10. Design and implementation of an optimal laser pulse front tilting scheme for ultrafast electron diffraction in reflection geometry with high temporal resolution

    Directory of Open Access Journals (Sweden)

    Francesco Pennacchio

    2017-07-01

    Full Text Available Ultrafast electron diffraction is a powerful technique to investigate out-of-equilibrium atomic dynamics in solids with high temporal resolution. When diffraction is performed in reflection geometry, the main limitation is the mismatch in group velocity between the overlapping pump light and the electron probe pulses, which affects the overall temporal resolution of the experiment. A solution already available in the literature involved pulse front tilt of the pump beam at the sample, providing a sub-picosecond time resolution. However, in the reported optical scheme, the tilted pulse is characterized by a temporal chirp of about 1 ps at 1 mm away from the centre of the beam, which limits the investigation of surface dynamics in large crystals. In this paper, we propose an optimal tilting scheme designed for a radio-frequency-compressed ultrafast electron diffraction setup working in reflection geometry with 30 keV electron pulses containing up to 105 electrons/pulse. To characterize our scheme, we performed optical cross-correlation measurements, obtaining an average temporal width of the tilted pulse lower than 250 fs. The calibration of the electron-laser temporal overlap was obtained by monitoring the spatial profile of the electron beam when interacting with the plasma optically induced at the apex of a copper needle (plasma lensing effect. Finally, we report the first time-resolved results obtained on graphite, where the electron-phonon coupling dynamics is observed, showing an overall temporal resolution in the sub-500 fs regime. The successful implementation of this configuration opens the way to directly probe structural dynamics of low-dimensional systems in the sub-picosecond regime, with pulsed electrons.

  11. Using the combination refraction-reflection solid to design omni-directional light source used in underwater wireless optical communication

    Science.gov (United States)

    Rao, Jionghui; Yao, Wenming; Wen, Linqiang

    2015-10-01

    Underwater wireless optical communication is a communication technology which uses laser as an information carrier and transmits data through water. Underwater wireless optical communication has some good features such as broader bandwidth, high transmission rate, better security, anti—interference performance. Therefore, it is promising to be widely used in the civil and military communication domains. It is also suitable for high-speed, short-range communication between underwater mobile vehicles. This paper presents a design approach of omni-directional light source used in underwater wireless optical communication, using TRACEPRO simulation tool to help design a combination solid composed of the lens, conical reflector and parabolic reflector, and using the modulated DPSS green laser in the transmitter module to output the laser beam in small divergence angles, after expanded by the combination refraction-reflection solid, the angle turns into a space divergence angle of 2π, achieving the omni-directional light source of hemisphere space, and test in the air and underwater, the result shows that the effect is fine. This paper analyzes the experimental test in the air and water, in order to make further improvement of the uniformity of light distribution, we optimize the reflector surface parameters of combination refraction-reflection solid and test in the air and water. The result shows that omni-directional light source used in underwater wireless optical communication optimized could achieve the uniformity of light distribution of underwater space divergence angle of 2π. Omni-directional light source used in underwater wireless optical communication designed in this paper has the characteristics of small size and uniformity of light distribution, it is suitable for application between UUVs, AUVs, Swimmer Delivery Vehicles (SDVs) and other underwater vehicle fleet, it realizes point-to-multipoint communications.

  12. Design and Test of a Soil Profile Moisture Sensor Based on Sensitive Soil Layers

    Science.gov (United States)

    Liu, Cheng; Qian, Hongzhou; Cao, Weixing; Ni, Jun

    2018-01-01

    To meet the demand of intelligent irrigation for accurate moisture sensing in the soil vertical profile, a soil profile moisture sensor was designed based on the principle of high-frequency capacitance. The sensor consists of five groups of sensing probes, a data processor, and some accessory components. Low-resistivity copper rings were used as components of the sensing probes. Composable simulation of the sensor’s sensing probes was carried out using a high-frequency structure simulator. According to the effective radiation range of electric field intensity, width and spacing of copper ring were set to 30 mm and 40 mm, respectively. A parallel resonance circuit of voltage-controlled oscillator and high-frequency inductance-capacitance (LC) was designed for signal frequency division and conditioning. A data processor was used to process moisture-related frequency signals for soil profile moisture sensing. The sensor was able to detect real-time soil moisture at the depths of 20, 30, and 50 cm and conduct online inversion of moisture in the soil layer between 0–100 cm. According to the calibration results, the degree of fitting (R2) between the sensor’s measuring frequency and the volumetric moisture content of soil sample was 0.99 and the relative error of the sensor consistency test was 0–1.17%. Field tests in different loam soils showed that measured soil moisture from our sensor reproduced the observed soil moisture dynamic well, with an R2 of 0.96 and a root mean square error of 0.04. In a sensor accuracy test, the R2 between the measured value of the proposed sensor and that of the Diviner2000 portable soil moisture monitoring system was higher than 0.85, with a relative error smaller than 5%. The R2 between measured values and inversed soil moisture values for other soil layers were consistently higher than 0.8. According to calibration test and field test, this sensor, which features low cost, good operability, and high integration, is qualified for

  13. Photoelectron Yield and Photon Reflectivity from Candidate LHC Vacuum Chamber Materials with Implications to the Vacuum Chamber Design

    CERN Document Server

    Baglin, V; Gröbner, Oswald

    1998-01-01

    Studies of the photoelectron yield and photon reflectivity at grazing incidence (11 mrad) from candidate LHC vacuum chamber materials have been made on a dedicated beam line on the Electron Positron A ccumulator (EPA) ring at CERN. These measurements provide realistic input toward a better understanding of the electron cloud phenomena expected in the LHC. The measurements were made using synchrotro n radiation with critical photon energies of 194 eV and 45 eV; the latter corresponding to that of the LHC at the design energy of 7 TeV. The test materials are mainly copper, either, i) coated by co- lamination or by electroplating onto stainless steel, or ii) bulk copper prepared by special machining. The key parameters explored were the effect of surface roughness on the reflectivity and the pho toelectron yield at grazing photon incidence, and the effect of magnetic field direction on the yields measured at normal photon incidence. The implications of the results on the electron cloud phenom ena, and thus the L...

  14. Summary of Jimsphere wind profiles: Programs, data, comments, part 1. [for use in aeronautical vehicle design and engineering

    Science.gov (United States)

    Willett, J. A.

    1979-01-01

    Jimsphere wind profiles are documented for the following ranges and installations: Eastern Test Range, Cape Kennedy, Florida; Western Test Range; Point Mugu, California; White Sands Missile Range, New Mexico; Wallops Island, Virginia; Green River, Utah; and Vandenberg Air Force Base, California. Profile information for 1964-1977 includes data summaries, computer formats, frequency distributions, composite listings, etc., for use in establishing and interpreting natural environment criteria for aeronautical vehicle design and engineering operations.

  15. A "safe space" for learning and reflection: one school's design for continuity with a peer group across clinical clerkships.

    Science.gov (United States)

    Chou, Calvin L; Johnston, C Bree; Singh, Bobby; Garber, Jonathan D; Kaplan, Elizabeth; Lee, Kewchang; Teherani, Arianne

    2011-12-01

    The value of continuity in medical education, particularly during clerkships, is increasingly recognized. Previous clerkship-based models have described changes that emphasize continuity in patient care, learner supervision, and curriculum. The creation of continuous student peer groups can foster interactions that enhance mutual support through uncomfortable professional transitions during the clerkship years. Here, the authors describe a third-year clerkship model based at the San Francisco Veterans Affairs (VA) Medical Center called VA Longitudinal Rotations (VALOR), designed explicitly to establish a supportive learning environment for small peer groups.Seven groups of medical students (42 total) completed VALOR across three academic years between 2007 and 2009. On clerkships during VALOR, one hour per week was designated for faculty-facilitated sessions amongst peer groups. Students' perceptions of peer group support and overall program satisfaction were determined with immediate post surveys and focus groups at the end of VALOR, and with follow-up surveys 5 to 27 months after completing VALOR. Students strongly valued several elements of VALOR peer groups, including support through clerkship challenges, meeting for facilitated reflection, and appreciating patient experiences across the continuum of care. Students' appreciation for their peer group experiences persisted well after the conclusion of VALOR. VALOR students performed the same as or better than traditional clerkship students on knowledge and skill-based outcomes. The authors demonstrate that their third-year clerkship program using peer groups has built supportive learning networks and facilitated reflection, allowing students to develop critical professional skills. Student communication around patient care was also feasible and highly valued.

  16. Design, fabrication, and analysis of miniature reflective oxygen monitoring system for use in PDT of esophageal carcinoma

    Science.gov (United States)

    Premasiri, Amaranath; Happawana, Gemunu

    2008-02-01

    Photodynamic therapy (PDT) is an effective and minimally invasive treatment modality with relatively less side effects, which is approved by FDA for the treatment of esophageal cancer. Maximum therapeutic outcome of the PDT protocol for each individual patient requires optimization of the components of PDT operating at their highest efficacy. Tumor necrosis, the method of malignant tissue destruction by PDT, is carried out by the toxic singlet oxygen molecules that are being formed from the molecular oxygen in the tumor. The availability of molecular oxygen, hence being the rate limiting step for PDT plays a key role in the treatment protocol. Currently the PDT of esophageal carcinoma is rather a blind process since there is no method to monitor the tumor oxygen level during the treatment. In this paper we present an optical technique to monitor molecular oxygen level in the PDT milieu. The technique described herein is a reflection oximetry technique designed with small semiconductor lasers and a silicon photodiode. The light used for monitoring system comes from two semiconductor diode lasers of 650 nm and 940 nm wavelengths. The two lasers and the photodiode are mounted onto a small package which is to be imprinted onto a balloon catheter containing the PDT light delivery system. Lasers and the photodiode are powered and controlled by a control box that is connected via a cable. Light sources and the respective photodiode output are controlled by the LabVIEW virtual instrumentation. The sequential on and off light source and the respective reflective signal are processed with MATLAB. The latter code integrates with LabVIEW to make an automatic calculation of the corresponding light absorption by each chromophore and to calculate the change in oxygen level as well as the amount of blood and oxygen present in the treatment area. The designed system is capable of monitoring the change in oxygen level and the blood flow in any part of the human body where the

  17. Seabed resident event driven profiling system (SREP). Concept, design and tests

    Digital Repository Service at National Institute of Oceanography (India)

    Mascarenhas, A.A.M.Q.; Afzulpurkar, S.; Maurya, P.K.; Fernandes, L.; Madhan, R.; Desa, E.S.; Dabolkar, N.A.; Navelkar, G.S.; Naik, L.; Shetye, V.G.; Shetty, N.B.; Prabhudesai, S.P.; Nagvekar, S.; Vimalakumari, D.

    The seabed resident event driven profiling system (SREP) described here offers a novel, optimized approach to profiling in coastal waters from seabed to sea surface during the rough seas encountered in the southwest monsoon season (June...

  18. Reflecting reflection in supervision

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    associated with reflection and an exploration of alternative conceptions that view reflection within the context of settings which have a more group- and team-based orientation. Drawing on an action research project on health care supervision, the paper questions whether we should reject earlier views...... of reflection, rehabilitate them in order to capture broader connotations or move to new ways of regarding reflection that are more in keeping with not only reflective but also emotive, normative and formative views on supervision. The paper presents a critical perspective on supervision that challenge...... the current reflective paradigm I supervision and relate this to emotive, normative and formative views supervision. The paper is relevant for Nordic educational research into the supervision and guidance...

  19. A design of speed reducer with trapezoidal tooth profile for robot manipulator

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Won Ki; Oh, Se Hoon [Chung-Ang University, Seoul (Korea, Republic of)

    2011-01-15

    Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study.

  20. A design of speed reducer with trapezoidal tooth profile for robot manipulator

    International Nuclear Information System (INIS)

    Nam, Won Ki; Oh, Se Hoon

    2011-01-01

    Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study

  1. Looping up Professional Reflection in Honours Programmes

    Science.gov (United States)

    Van Dijk, Trijntje

    2012-01-01

    Within the Saxion Universities in the Netherlands, a profile of the "Reflective Professional" comprises a number of competencies that the honours programmes are designed to develop and support. This article describes the process of developing these competencies. The process involves three loops of learning, characterized by three sets of…

  2. Reflective optics

    CERN Document Server

    Korsch, Dietrich

    1991-01-01

    This is the first book dedicated exclusively to all-reflective imaging systems. It is a teaching tool as well as a practical design tool for anyone who specializes in optics, particularly for those interested in telescopes, infrared, and grazing-incidence systems. The first part of the book describes a unified geometric optical theory of all-reflective imaging systems (from near-normal to grazing incidence) developed from basic principles. The second part discusses correction methods and a multitude of closed-form solutions of well-corrected systems, supplemented with many conventional and unc

  3. Design of container velocity profile for the suppression of liquid sloshing

    Science.gov (United States)

    Kim, Dongjoo

    2016-11-01

    In many industrial applications, high-speed position control of a liquid container causes undesirable liquid vibrations called 'sloshing' which poses a control challenge in fast maneuvering and accurate positioning of containers. Recently, it has been shown that a control theory called 'input shaping' is successfully applied to reduce the sloshing, but its success comes at a cost of longer process time. Therefore, we aim to minimize liquid sloshing without increasing the process time when a container moves horizontally by a target distance within a limited time. In this study, sensing and feedback actuation are not permitted but the container velocity is allowed to be modified from a given triangular profile. A new design is proposed by applying input shaping to the container velocity with carefully selected acceleration time. That is, the acceleration time is chosen to be the 1st mode natural period, and the input shaper is determined based on the 3rd mode natural frequency. The proposed approach is validated by performing numerical simulations, which show that the simple modification of container velocity reduces the sloshing significantly without additional process time in a feedforward manner. Supported by the NRF programs (NRF-2015R1D1A1A01059675) of Korean government.

  4. Base profile design for high-performance operation of bipolar transistors at liquid-nitrogen temperature

    International Nuclear Information System (INIS)

    Stork, J.M.C.; Harame, D.L.; Meyerson, B.S.; Nguyen, T.N.

    1989-01-01

    The base profile requirements of Si bipolar junction transistors (BJT's) high-performance operation at liquid-nitrogen temperature are examined. Measurements of thin epitaxial-base polysilicon-emitter n-p-n transistors with increasing base doping show the effects of bandgap narrowing, mobility changes, and carrier freezeout. At room temperature the collector current at low injection is proportional to the integrated base charge, independent of the impurity distribution. At temperatures below 150 Κ, however, minority injection is dominated by the peak base doping because of the greater effectiveness of bandgap narrowing. When the peak doping in the base approaches 10 19 cm -3 , the bandgap difference between emitter and base is sufficiently small that the current gain no longer monotonically decreases with lower temperature but instead shows a maximum as low as 180 Κ. The device design window appears limited at the low-current end by increased base-emitter leakage due to tunneling and by resistance control at the high-current end. Using the measured dc characteristics, circuit delay calculations are made to estimate the performance of an ECL ring oscillator at room and liquid-nitrogen temperatures. It is shown that if the base doping can be raised to 10 19 cm -3 while keeping the base thickness constant, the minimum delay at liquid nitrogen can approach the delay of optimized devices at room temperature

  5. Neutron reflectivity

    Directory of Open Access Journals (Sweden)

    Cousin Fabrice

    2015-01-01

    Full Text Available The specular neutron reflectivity is a technique enabling the measurement of neutron scattering length density profile perpendicular to the plane of a surface or an interface, and thereby the profile of chemical composition. The characteristic sizes that are probed range from around 5 Å up 5000 Å. It is a scattering technique that averages information on the entire surface and it is therefore not possible to obtain information within the plane of the interface. The specific properties of neutrons (possibility of tuning the contrast by isotopic substitution, sensitivity to magnetism, negligible absorption, low energy of the incident neutrons makes it particularly interesting in the fields of soft matter, biophysics and magnetic thin films. This course is a basic introduction to the technique and does not address the magnetic reflectivity. It is composed of three parts describing respectively its principle and its formalism, the experimental aspects of the method (spectrometers, samples and two examples related to the materials for energy.

  6. Evolution of Cross-Shore Profile Models for Sustainable Coastal Design

    Science.gov (United States)

    Ismail, Nabil; El-Sayed, Mohamed

    2014-05-01

    embracing; the low frequency band of infragravity (0.001- 0.02Hz) waves band and short incident wave band (0.05-0.10Hz). The present results highlight the necessity of incorporating interaction terms between wave - wave and wave- current in the development of cross shore and longshore model formulations. The numerical results confirm previous field observations of nearshore processes that waves in the infragravity range, shear and edge waves, play an important role on near shore hydrodynamics and beach morphology. A prime recommendation of this research work is that the UNIBEST- TC and similar models need to take into effect the interaction between waves, cross shore and longshore currents. Furthermore the models should consider the effects of long waves within the spectrum as well as the generated edge waves. Nevertheless, modeling of this wide range of processes on real beaches needs extensive field data of high spatial and temporal resolutions. Such challenging goal remains to be pursued to enhance state of art prediction of the cross-shore evolution profiles. REFERENCES Addison, P.S. (2002). "The Illustrated Wavelet Transform Handbook, Introductory Theory and Applications in Science", 349 p., Bristol, UK, Institute of Physics Publishing. Elsayed, M.A.K. (2006). "Application of a Cross-Shore Profile Evolution Model to Barred Beaches", Journal of Coastal Research, 22(3), 645-663. Elsayed, M.A.K. (2007). "Non-linear Wave-Wave Interactions in a Mistral Event". Journal of Coastal Research, 23(5), 1318-1323. Ismail, N. M., and Wiegel, R. L. (1983). "Effect of Opposing Waves on Momentum Jets Spreading Rate", Journal of Waterway, Port, Coastal and Ocean Division, ASCE, Vol.109, No.4, 465-483. Ismail, N.M. (1984). "Wave-Current Models for the Design of Marine Structures", Journal of Waterway, Port, Coastal and Ocean Engineering, ASCE, Vol. 110, No. 4, 432-446. Ismail, N.M. (2007). "Discussion of Reynolds Stresses and Velocity Distributions in a Wave-Current Coexisting

  7. Research on improved design of airfoil profiles based on the continuity of airfoil surface curvature of wind turbines

    DEFF Research Database (Denmark)

    Chen, Jin; Cheng, Jiangtao; Shen, Wenzhong

    2013-01-01

    Aerodynamic of airfoil performance is closely related to the continuity of its surface curvature, and airfoil profiles with a better aerodynamic performance plays an important role in the design of wind turbine. The surface curvature distribution along the chord direction and pressure distributio...

  8. Synthesis, Pharmacological Profile and Docking Studies of New Sulfonamides Designed as Phosphodiesterase-4 Inhibitors.

    Directory of Open Access Journals (Sweden)

    Isabelle Karine da Costa Nunes

    Full Text Available Prior investigations showed that increased levels of cyclic AMP down-regulate lung inflammatory changes, stimulating the interest in phosphodiesterase (PDE4 as therapeutic target. Here, we described the synthesis, pharmacological profile and docking properties of a novel sulfonamide series (5 and 6a-k designed as PDE4 inhibitors. Compounds were screened for their selectivity against the four isoforms of human PDE4 using an IMAP fluorescence polarized protocol. The effect on allergen- or LPS-induced lung inflammation and airway hyper-reactivity (AHR was studied in A/J mice, while the xylazine/ketamine-induced anesthesia test was employed as a behavioral correlate of emesis in rodents. As compared to rolipram, the most promising screened compound, 6a (LASSBio-448 presented a better inhibitory index concerning PDE4D/PDE4A or PDE4D/PDE4B. Accordingly, docking analyses of the putative interactions of LASSBio-448 revealed similar poses in the active site of PDE4A and PDE4C, but slight unlike orientations in PDE4B and PDE4D. LASSBio-448 (100 mg/kg, oral, 1 h before provocation, inhibited allergen-induced eosinophil accumulation in BAL fluid and lung tissue samples. Under an interventional approach, LASSBio-448 reversed ongoing lung eosinophilic infiltration, mucus exacerbation, peribronchiolar fibrosis and AHR by allergen provocation, in a mechanism clearly associated with blockade of pro-inflammatory mediators such as IL-4, IL-5, IL-13 and eotaxin-2. LASSBio-448 (2.5 and 10 mg/kg also prevented inflammation and AHR induced by LPS. Finally, the sulfonamide derivative was shown to be less pro-emetic than rolipram and cilomilast in the assay employed. These findings suggest that LASSBio-448 is a new PDE4 inhibitor with marked potential to prevent and reverse pivotal pathological features of diseases characterized by lung inflammation, such as asthma.

  9. Further improvement in the light output power of InGaN-based light emitting diodes by reflective current blocking design

    International Nuclear Information System (INIS)

    Tsai, Chun-Fu; Su, Yan-Kuin; Lin, Chun-Liang

    2011-01-01

    In this study, the fabrication and characterization of InGaN/GaN multiple-quantum-well light-emitting diodes (LEDs) with further improvement by the design of a reflective current blocking layer (CBL) were described, and these are demonstrated to be an inexpensive and feasible way for improving the performance of LEDs. With the reflective CBL, not only was the injected current forced to spread outside instead of flowing directly downward under a p-pad, but the light generated from the active region could also be extracted outside of the LED by reflection under the p-pad. At 20 mA, as compared to the conventional LED, the light output power of the LEDs with the normal and reflective CBL can be increased by 15.7% and 25.8%, respectively. We found that the forward voltages of the LEDs with CBL structure were both about 3.7 V at 20 mA, which was slightly higher than that of the conventional LED (3.6 V). In our experiment, the further increase in the light output power of the reflective CBL LED could be attributed to more current injection into the light-emitting active region outside of the p-pad by the CBL and a reduction in optical absorption at the p-pad with more extraction by the reflective design

  10. Design and Manufacture of a Low-Profile Radar Retro-Reflector

    National Research Council Canada - National Science Library

    Bird, Dudley

    2005-01-01

    .... Radar retro-reflectors are often passive, but active elements can be included to enhance the backscattered signal, or to modify it in some way, such as by the introduction of modulation or simulation of range profiles...

  11. Metabolite profiling of recombinant CHO cells: Designing tailored feeding regimes that enhance recombinant antibody production.

    NARCIS (Netherlands)

    Sellick, C.A.; Croxford, A.S.; Maqsood, A.R.; Stephens, G.; Westerhoff, H.V.; Goodacre, R.; Dickson, A.J.

    2011-01-01

    Chinese hamster ovary (CHO) cells are the primary platform for commercial expression of recombinant therapeutic proteins. Obtaining maximum production from the expression platform requires optimal cell culture medium (and associated nutrient feeds). We have used metabolite profiling to define the

  12. Metabolite profiling of recombinant CHO cells: designing tailored feeding regimes that enhance recombinant antibody production.

    NARCIS (Netherlands)

    Sellick, C.A.; Croxford, A.S.; Maqsood, A.R.; Stephens, G.; Westerhoff, H.V.; Goodacre, R.; Dickson, A.J.

    2011-01-01

    Chinese hamster ovary (CHO) cells are the primary platform for commercial expression of recombinant therapeutic proteins. Obtaining maximum production from the expression platform requires optimal cell culture medium (and associated nutrient feeds). We have used metabolite profiling to define the

  13. A Design-Based Research Project on Information Literacy Focusing on Process, Reflections and Self-Feedback

    Directory of Open Access Journals (Sweden)

    Majbritt Ursula Johansen

    2016-12-01

    Full Text Available Many curriculums assume that the new generation of students are digital natives and information literate. However, studies show that this is not often the case. From these studies and our own experiences working with multidisciplinary students in the Health Sciences we found that students were not as information literate as required in the curriculum. Using Design Based Research as a method (following the four phases below, we developed a new information search process and a web-based tool with feedback opportunities from teachers and librarians in order to qualify the students competencies. Problem identification: Despite earlier initiatives from library and department, the students didn’t achieve higher levels of information literacy. Prototyping: Requirements and educational material were merged and tested while gathering feedback. Iterations: The prototype and feedback were evaluated and developed into a new information search process, which was tested and evaluated. Reflection and generalization: Initiative was taken to develope a web-based application visualizing the steps with the learning points: self-feedback, peer-feedback and counselor feedback. The result of the project is a new information search process model and a web-based learning environment called B!NKO 2.0. The evaluations have shown positive feedback on both the process and the web tool. The project has opened up new possibilities that go beyond the Health multidisciplinary students. A new project concerning the Humanities and Social Sciences is incipient. In this project new functionalities are also expected. B!NKO 2.0 has to a great extent shown its worth to help Health multidisciplinary students to get a deeper understanding of information literacy, and how to develop and change searches to get better results. B!NKO 2.0 has also given a positive "side effect” on the librarians work. Time spend on the "Book a Librarian” service have decreased for the librarians using

  14. Structural and geological analysis of the northern Pescadero basin: preliminary results based on the analysis of 2D multichannel seismic reflection profiles

    Science.gov (United States)

    Spelz, R. M.; Ramirez-Zerpa, N. A.; Gonzalez-Fernandez, A.; Yarbuh, I.; Contreras, J.

    2017-12-01

    The Pacific-North America plate boundary along the Gulf of California is characterized by an array of right-stepping, right-lateral, transform faults connecting a series of pull-apart basins distributed along the gulf axis. Altogether, these structures accommodate an oblique-divergent component of deformation characterizing the modern tectonic regime along the gulf. The northern Pescadero complex, in the southern Gulf of California, is one of the deepest and probably least studied transtensional fault-termination basins in the gulf. The complex is bounded to the north and south by Atl and Farallon transform faults, respectively, and consists of two asymmetric, rhomboidal-shaped, basins with a series of intrabasinal high-angle normal faults and ramps connecting their depocenters. In this study we present preliminary results derived from the processing and analysis of 400 km of seismic reflection profiles, collected in 2006 onboard the R/V Francisco de Ulloa in northern Pescadero, providing new insights into the geology and internal structure of the basin. Northern Pescadero is a deep and narrow basin characterized by a maximum sedimentary infill of 1 km, and depths to the basin floor exceeding 3500 m. Deformation is chiefly accommodated by an array of self-parallel half-graben structures that appear to grow towards the northern flank of the basin. Faults-scarps located farther from the deformation axis appear to be more degraded, suggesting a progressively younger age of the half-grabens near the basin's depocenter. Another important feature revealed in the seismic images is the lack of sediments on top of the crystalline basement that floors the narrow central portion of the basin. In this area the reflectors at the basin's floor show a pronounced increase in amplitude and coherence, indicating the emplacement of magmatic extrusions. Likewise, in those areas with the greater sediment infill, the occurrence of high-amplitude reflectors, located 150 m below the

  15. An Evaluation of the Instruction Carried out with Printed Laboratory Materials Designed in Accordance with 5E Model: Reflection of Light and Image on a Plane Mirror

    Science.gov (United States)

    Ayvaci, Hakan Sevki; Yildiz, Mehmet; Bakirci, Hasan

    2015-01-01

    This study employed a print laboratory material based on 5E model of constructivist learning approach to teach reflection of light and Image on a Plane Mirror. The effect of the instruction which conducted with the designed print laboratory material on academic achievements of prospective science and technology teachers and their attitudes towards…

  16. Bringing the Classroom into the World: Three Reflective Case Studies of Designing Mobile Technology to Support Blended Learning for the Built and Landscaped Environment

    Science.gov (United States)

    Smith, Wally; Lewi, Hannah; Saniga, Andrew; Stickells, Lee; Constantinidis, Dora

    2017-01-01

    We report and reflect on three projects, carried out by us as educators and technology researchers over a four year period, that explore the use of mobile technologies in the fieldwork of Australian tertiary students of architectural history, landscape history and urban design. Treating these as three case studies, our focus is on the emerging…

  17. A novel non-contact profiler design for measuring synchrotron radiation mirrors

    International Nuclear Information System (INIS)

    Lin, Yao; Takacs, P.Z.; Furenlid, K.; DeBiasse, R.A.; Wang, Run-Wen

    1990-08-01

    A novel optical profiler is described in this paper for measurement of surface profiles of synchrotron radiation (SR) mirrors. The measurement is based on a combination of an optical heterodyne technique and a precise phase measurement procedure without a reference surface. A Zeeman two-frequency He-Ne laser is employed as the light source. The common-path optical system, which uses a birefringent lens as the beam splitter, minimizes the effects of air turbulence, sample vibration and temperature variation. A special autofocus system allows the profiler to measure the roughness and shape of a sample surface. The optical system is mounted on a large linear air-bearing slide, and is capable of scanning over distances covering the spatial period range from several microns to nearly one meter with a high measurement accuracy. 9 refs., 5 figs

  18. Spectral interdependence of remote-sensing reflectance and its implications on the design of ocean color satellite sensors.

    Science.gov (United States)

    Lee, Zhongping; Shang, Shaoling; Hu, Chuanmin; Zibordi, Giuseppe

    2014-05-20

    Using 901 remote-sensing reflectance spectra (R(rs)(λ), sr⁻¹, λ from 400 to 700 nm with a 5 nm resolution), we evaluated the correlations of R(rs)(λ) between neighboring spectral bands in order to characterize (1) the spectral interdependence of R(rs)(λ) at different bands and (2) to what extent hyperspectral R(rs)(λ) can be reconstructed from multiband measurements. The 901 R(rs) spectra were measured over a wide variety of aquatic environments in which water color varied from oceanic blue to coastal green or brown, with chlorophyll-a concentrations ranging from ~0.02 to >100  mg  m⁻³, bottom depths from ~1  m to >1000  m, and bottom substrates including sand, coral reef, and seagrass. The correlation coefficient of R(rs)(λ) between neighboring bands at center wavelengths λ(k) and λ(l), r(Δλ)(λ(k), λ(l)), was evaluated systematically, with the spectral gap (Δλ=λ(l)-λ(k)) changing between 5, 10, 15, 20, 25, and 30 nm, respectively. It was found that r(Δλ) decreased with increasing Δλ, but remained >0.97 for Δλ≤20  nm for all spectral bands. Further, using 15 spectral bands between 400 and 710 nm, we reconstructed, via multivariant linear regression, hyperspectral R(rs)(λ) (from 400 to 700 nm with a 5 nm resolution). The percentage difference between measured and reconstructed R(rs) for each band in the 400-700 nm range was generally less than 1%, with a correlation coefficient close to 1.0. The mean absolute error between measured and reconstructed R(rs) was about 0.00002  sr⁻¹ for each band, which is significantly smaller than the R(rs) uncertainties from all past and current ocean color satellite radiometric products. These results echo findings of earlier studies that R(rs) measurements at ~15 spectral bands in the visible domain can provide nearly identical spectral information as with hyperspectral (contiguous bands at 5 nm spectral resolution) measurements. Such results provide insights for data

  19. Design and fabrication of anti-reflection coating on Gallium Phosphide, Zinc Selenide and Zinc Sulfide substrates for visible and infrared application

    Directory of Open Access Journals (Sweden)

    Mokrý P.

    2013-05-01

    Full Text Available Results of design and fabrication of a dual-band anti-reflection coating on a gallium phosphide (GaP, zinc selenide (ZnSe and zinc sulfide (ZnS substrates are presented. A multilayer stack structure of antireflection coatings made of zinc sulfide and yttrium fluoride (YF3 was theoretically designed for optical bands between 0.8 and 0.9 μm and between 9.5 and 10.5 μm. This stack was designed as efficient for these materials (GaP, ZnS, ZnSe together. Multilayer stack structure was deposited using thermal evaporation method. Theoretically predicted transmittance spectra were compared with transmitted spectra measured on coated substrates. Efficiency of anti-reflection coating is estimated and discrepancies are analyzed and discussed.

  20. A Ring-shaped photodiode designed for use in a reflectance pulse oximetry sensor in wireless health monitoring applications

    DEFF Research Database (Denmark)

    Duun, Sune; Haahr, Rasmus Grønbek; Birkelund, Karen

    2010-01-01

    We report a photodiode for use in a reflectance pulse oximeter for use in autonomous and low-power homecare applications. The novelty of the reflectance pulse oximeter is a large ring shaped backside silicon pn photodiode. The ring-shaped photodiode gives optimal gathering of light and thereby...... enable very low light-emitting diode (LED) driving currents for the pulse oximeter. The photodiode also have a two layer SiO2/SiN interference filter yielding 98% transmission at the measuring wavelengths, 660 nm and 940 nm, and suppressing other wavelengths down to 50% transmission. The photodiode has...

  1. Enhancing Critical Thinking Skills in First Year Environmental Management Students: A Tale of Curriculum Design, Application and Reflection

    Science.gov (United States)

    Whiley, Dona; Witt, Bradd; Colvin, R. M.; Sapiains Arrue, Rodolfo; Kotir, Julius

    2017-01-01

    This paper chronicles the experience of academic staff in developing a course to enhance the critical thinking skills of environmental management undergraduates. We outline our considerations and process for course development, discuss insights from course evaluations, and reflect on the challenges encountered. We believe these perspectives will…

  2. The Optimal Design Method and Standardized Mathematical Model of Tooth Profile Modification of Spur Gear

    Directory of Open Access Journals (Sweden)

    Wenjie Mei

    2016-01-01

    Full Text Available The paper reports a tooth profile modification method of spur gear. After establishing a standardized mathematical model for optimized tooth profile and simulating meshing process with ANSYS finite element analysis, we obtained 625 groups of gear models with different modification parameters. The group with minimum transmission errors owns the optimal parameters. Genetic algorithm was adopted in the entire process for the purpose of reducing the variation of transmission errors in meshing process. The arc and parabolic modification were doing the same processing. After comparing the transmission errors fluctuation produced by the meshing process of gear of nonmodification with arc modification and parabolic modification, we found that the best modification effects of arc modification and parabolic modification were both reduced by 90%. The modification method makes the gear drive process more stable and efficient, and it is also promising in general application for gear drive.

  3. Design and construction of the facility for neutron depth profiling in research reactor RECH-1

    International Nuclear Information System (INIS)

    Mutis P, Octavio; Navarro A, Gustavo; Henriquez A, Carlos; Pereda B, Claudio

    2002-01-01

    Here is described the experimental facility for Neutron Depth Profiling, NDP, constructed at the CCHEN laboratories, as well as some general aspects of the technique. It is also shown applications to the concentration analysis of 10 B and 6 Li as a function of depth for borophosphosilicate glass, BPSG, and for a thick sinter of 6 Li in a zinc-nickel-manganese oxide. Achieved depth resolution is comparable to that obtained in reference advanced laboratories. (author)

  4. Design and application of natural product derived probes for activity based protein profiling

    OpenAIRE

    Battenberg, Oliver Alexander

    2015-01-01

    The identification of new antibacterial protein targets by activity based protein profiling (ABPP) is an important approach to face the increasing emergence of resistant bacteria. The scope of this work focuses on three new strategies for the labeling of antibacterial protein-targets with natural product derived ABPP-probes: A.) Evaluation of the intrinsic photo-reactivity of α-pyrones and pyrimidones for use as photo-crosslinkers. B.) Synthesis of a benzophenone-tag that combines photo-cross...

  5. Design of characteristic parameters for controlling tungsten tip profile during electrochemical etching

    Energy Technology Data Exchange (ETDEWEB)

    Le Duy Cuong; Duong, Thanh Hung; Kim, Huyn Chul [Inje University, Gimhae (Korea, Republic of)

    2014-05-15

    Micro/nano-scale tungsten tips fabricated by electrochemical etching have many diverse industrial applications. The characteristic parameters of the tungsten tip profile include apex radius, taper angle, and aspect ratio. These parameters are governed by many factors including applied voltage, concentration of the electrolyte (potassium hydroxide) solution, and diameter of the inner gold ring. However, a systematic investigation with the aim of determining the best conditions for fabricating micro/nano-scale tips with desired profiles has not been carried out yet. This study is aimed at obtaining controllable tungsten tip -particularly with respect to the radius of curvature and aspect ratio of tips (taper angle)-by altering the experimental conditions. A series of experiments were executed and the results were aggregated and analyzed using response surface methodology in order to identify the relationships between the tungsten tip characteristics and input parameters. The method proposed herein would prove to be suitable for a variety of applications in industries that require tungsten tips with a specific profile.

  6. Design of characteristic parameters for controlling tungsten tip profile during electrochemical etching

    International Nuclear Information System (INIS)

    Le Duy Cuong; Duong, Thanh Hung; Kim, Huyn Chul

    2014-01-01

    Micro/nano-scale tungsten tips fabricated by electrochemical etching have many diverse industrial applications. The characteristic parameters of the tungsten tip profile include apex radius, taper angle, and aspect ratio. These parameters are governed by many factors including applied voltage, concentration of the electrolyte (potassium hydroxide) solution, and diameter of the inner gold ring. However, a systematic investigation with the aim of determining the best conditions for fabricating micro/nano-scale tips with desired profiles has not been carried out yet. This study is aimed at obtaining controllable tungsten tip -particularly with respect to the radius of curvature and aspect ratio of tips (taper angle)-by altering the experimental conditions. A series of experiments were executed and the results were aggregated and analyzed using response surface methodology in order to identify the relationships between the tungsten tip characteristics and input parameters. The method proposed herein would prove to be suitable for a variety of applications in industries that require tungsten tips with a specific profile

  7. Design and construction of an analytical instrument for neutron depth profiling

    International Nuclear Information System (INIS)

    Mutis, Octavio; Venegas, Rafael

    1998-01-01

    Full text: An experimental facility for Neutron Depth Profiling, recently constructed at CCHEN's laboratories is described. The technique allows to measure the mean atomic concentration ρ(x) of certain isotopes as a function of distance x to the surface for the first depth microns. The observation area is about 15 mm in diameter and the range in depth depends on the matrix stopping power and on the energy of the charged particle associated with the A(n,y)B reaction, in which this technique is supported, where A is the isotope to be detected, y is an α particle or a proton and B is the recoil nucleus. The spatial resolution depends upon the characteristics of the detection chain and its geometry and of the thermal spectrum of the beam. An appropriate deconvolution on the merging particle energy spectrum allows to recover the concentration profile. The application of the technique to the analysis of some phospho borosilicate films deposited on s Si substrate, lithium tantalate ceramics deposited on Si substrate and a sintered of lithium and Zn-Ni-Mn oxide are shown here with a resolution comparative to that of advanced laboratories

  8. Subaqueous Cap Design: Selection of Bioturbation Profiles, Depths, and Process Rates

    National Research Council Canada - National Science Library

    Clarke, Douglas

    2001-01-01

    .... For either practice to satisfy the requirement of isolation of the contaminated sediments, design of caps of clean material must account for multiple factors affecting the long-term stability of the cap...

  9. Crystals with an Open Wave-Vector Surface: Peculiarities of Reflection and Possibilities of Designing Flat Lenses

    International Nuclear Information System (INIS)

    Eritsyan, O. S.; Lalayan, A. A.; Arakelyan, O. M.; Papoyan, A. A.; Kostanyan, R. B.

    2010-01-01

    The frequency dependence of the reflection coefficient of MgF 2 crystal in the frequency range of 200-800 cm -1 at different orientations of the optical axis has been investigated. The experimental data are compared with the calculation results. This comparison confirms that the wave vectors for the extraordinary wave have an open surface. This makes it possible to focus a divergent beam refracted at a flat boundary ori- ented perpendicularly to the optical crystal axis. The focusing effect of a plane-parallel MgF 2 crystal plate is calculated.

  10. Design of a D-alpha beam-ion profile diagnostic

    International Nuclear Information System (INIS)

    Luo, Y.; Heidbrink, W.W.; Burrell, K.H.

    2004-01-01

    Injected neutral beams ionize to create a population of beam ions. As they orbit around the tokamak and pass through the heating beams, some beam ions re-neutralize and emit D-alpha light. The intensity of this emission is weak compared to the signals from the injected neutrals, the warm (halo) neutrals, and the edge recombination neutrals but, for a favorable viewing geometry, the emission is Doppler shifted away from these bright interfering signals. Preliminary data from the DIII-D tokamak show that signals from re-neutralized beam ions have already been detected. A three-channel prototype instrument consisting of a spectrometer, mask, camera lenses, and frame-transfer charge coupled device is under development for measurements of the spatial profile of the beam ions

  11. The Reflective Learning Continuum: Reflecting on Reflection

    Science.gov (United States)

    Peltier, James W.; Hay, Amanda; Drago, William

    2005-01-01

    The importance of reflection to marketing educators is increasingly recognized. However, there is a lack of empirical research that considers reflection within the context of both the marketing and general business education literature. This article describes the use of an instrument that can be used to measure four identified levels of a…

  12. Meaning Profiles of Dwellings, Pathways, and Metaphors in Design: Implications for Education

    Science.gov (United States)

    Casakin, Hernan; Kreitler, Shulamith

    2017-01-01

    The study deals with the roles and interrelations of the meaning-based assessments of dwellings, pathways and metaphors in design performance. It is grounded in the Meaning Theory [Kreitler, S., and H. Kreitler. 1990. "The Cognitive Foundations of Personality Traits." New York: Plenum], which enables identifying the cognitive contents…

  13. Design of a Michelson Interferometer for Quantitative Refraction Index Profile Measurements

    NARCIS (Netherlands)

    Nijholt, J.L.M.

    1998-01-01

    This book describes the theoretical design of a three camera Michelson interferometer set-up for quantitative refractive index measuerments. Although a two camera system is easier to align and less expensive, a three camera interferometer is preferred because the expected measuring accuracy is much

  14. Moving-window dynamic optimization: design of stimulation profiles for walking.

    Science.gov (United States)

    Dosen, Strahinja; Popović, Dejan B

    2009-05-01

    The overall goal of the research is to improve control for electrical stimulation-based assistance of walking in hemiplegic individuals. We present the simulation for generating offline input (sensors)-output (intensity of muscle stimulation) representation of walking that serves in synthesizing a rule-base for control of electrical stimulation for restoration of walking. The simulation uses new algorithm termed moving-window dynamic optimization (MWDO). The optimization criterion was to minimize the sum of the squares of tracking errors from desired trajectories with the penalty function on the total muscle efforts. The MWDO was developed in the MATLAB environment and tested using target trajectories characteristic for slow-to-normal walking recorded in healthy individual and a model with the parameters characterizing the potential hemiplegic user. The outputs of the simulation are piecewise constant intensities of electrical stimulation and trajectories generated when the calculated stimulation is applied to the model. We demonstrated the importance of this simulation by showing the outputs for healthy and hemiplegic individuals, using the same target trajectories. Results of the simulation show that the MWDO is an efficient tool for analyzing achievable trajectories and for determining the stimulation profiles that need to be delivered for good tracking.

  15. Reflections of Practical Implementation of the academic course Analysis and Design of Algorithms taught in the Universities of Pakistan

    Directory of Open Access Journals (Sweden)

    Faryal Shamsi

    2017-12-01

    Full Text Available This Analysis and Design of Algorithm is considered as a compulsory course in the field of Computer Science. It increases the logical and problem solving skills of the students and make their solutions efficient in terms of time and space.  These objectives can only be achieved if a student practically implements what he or she has studied throughout the course. But if the contents of this course are merely studied and rarely practiced then the actual goals of the course is not fulfilled. This article will explore the extent of practical implementation of the course of analysis and design of algorithm. Problems faced by the computer science community and major barriers in the field are also enumerated. Finally, some recommendations are made to overcome the obstacles in the practical implementation of analysis and design of algorithms.

  16. Global gene expression profiles in brain regions reflecting abnormal neuronal and glial functions targeting myelin sheaths after 28-day exposure to cuprizone in rats

    International Nuclear Information System (INIS)

    Abe, Hajime; Saito, Fumiyo; Tanaka, Takeshi; Mizukami, Sayaka; Watanabe, Yousuke; Imatanaka, Nobuya; Akahori, Yumi; Yoshida, Toshinori; Shibutani, Makoto

    2016-01-01

    Both developmental and postpubertal cuprizone (CPZ) exposure impairs hippocampal neurogenesis in rats. We previously found that developmental CPZ exposure alters the expression of genes related to neurogenesis, myelination, and synaptic transmission in specific brain regions of offspring. Here, we examined neuronal and glial toxicity profiles in response to postpubertal CPZ exposure by using expression microarray analysis in the hippocampal dentate gyrus, corpus callosum, cerebral cortex, and cerebellar vermis of 5-week-old male rats exposed to 0, 120, and 600 mg/kg CPZ for 28 days. Genes showing transcript upregulation were subjected to immunohistochemical analysis. We found transcript expression alterations at 600 mg/kg for genes related to synaptic transmission, Ache and Prima1, and cell cycle regulation, Tfap4 and Cdkn1a, in the dentate gyrus, which showed aberrant neurogenesis in the subgranular zone. This dose downregulated myelination-related genes in multiple brain regions, whereas KLOTHO + oligodendrocyte density was decreased only in the corpus callosum. The corpus callosum showed an increase in transcript levels for inflammatory response-related genes and in the number of CD68 + microglia, MT + astrocytes, and TUNEL + apoptotic cells. These results suggest that postpubertal CPZ exposure targets synaptic transmission and cell cycle regulation to affect neurogenesis in the dentate gyrus. CPZ suppressed myelination in multiple brain regions and KLOTHO-mediated oligodendrocyte maturation only in the corpus callosum. The increased number of CD68 + microglia, MT + astrocytes, and TUNEL + apoptotic cells in the corpus callosum may be involved in the induction of KLOTHO + oligodendrocyte death and be a protective mechanism against myelin damage following CPZ exposure. - Highlights: • Target gene expression profiles were examined in rats after 28-day CPZ exposure. • Multiple brain region-specific global gene expression profiling was performed. • CPZ

  17. Reflections on the professional profile in positions of academic libraries director / Reflexiones sobre el perfil profesional para la dirección de bibliotecas universitarias

    Directory of Open Access Journals (Sweden)

    José Pablo Gallo León

    2016-10-01

    Full Text Available The transformation of the library paradigm in the last decade means that their professionals must acquire new skills and improve their increasingly demanding specific skills. This is especially critical in the case of management positions that are responsible for making decisions under the pressure of a changing and hostile environment. Therefore, it should be ensured that people accessing these positions correspond to a professional profile that enables them to perform properly. A proposal of competencies and skills that every director of university library should have is thus presented.

  18. Action Reflected and Project Based Combined Methodology for the Appropriate Comprehension of Mechanisms in Industrial Design Education

    Science.gov (United States)

    Yavuzcan, H. Güçlü; Sahin, Damla

    2017-01-01

    In industrial design (ID) education, mechanics-based courses are mainly based on a traditional lecture approach and they are highly abstract for ID students to comprehend. The existing studies highlight the requirement of a new approach for mechanics-based courses in ID departments. This study presents a combined teaching model for mechanisms…

  19. Application analysis tools for ASIP design: application profiling and instruction-set customization

    National Research Council Canada - National Science Library

    Karuri, Kingshuk; Leupers, Ranier

    2011-01-01

    ... of the operating system they are targeting and execute them on the main application processor in the SmartPhone. However these are not the only applications that need to run on the SmartPhone. There are many underlying applications, or lets better call them algorithms, that have very demanding performance and power consumption targets, yet need to be flexible. Here is where the custom processor comes into play for the implementation of algorithms that will have certain variability but are covering a narrow enough design sp...

  20. Global gene expression profiles in brain regions reflecting abnormal neuronal and glial functions targeting myelin sheaths after 28-day exposure to cuprizone in rats

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Hajime [Laboratory of Veterinary Pathology, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan); Pathogenetic Veterinary Science, United Graduate School of Veterinary Sciences, Gifu University, 1-1 Yanagido, Gifu-shi, Gifu 501-1193 (Japan); Saito, Fumiyo [Chemicals Evaluation and Research Institute, Japan, 1-4-25 Koraku, Bunkyo-ku, Tokyo 112-0004 (Japan); Tanaka, Takeshi; Mizukami, Sayaka; Watanabe, Yousuke [Laboratory of Veterinary Pathology, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan); Pathogenetic Veterinary Science, United Graduate School of Veterinary Sciences, Gifu University, 1-1 Yanagido, Gifu-shi, Gifu 501-1193 (Japan); Imatanaka, Nobuya; Akahori, Yumi [Chemicals Evaluation and Research Institute, Japan, 1-4-25 Koraku, Bunkyo-ku, Tokyo 112-0004 (Japan); Yoshida, Toshinori [Laboratory of Veterinary Pathology, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan); Shibutani, Makoto, E-mail: mshibuta@cc.tuat.ac.jp [Laboratory of Veterinary Pathology, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu-shi, Tokyo 183-8509 (Japan)

    2016-11-01

    Both developmental and postpubertal cuprizone (CPZ) exposure impairs hippocampal neurogenesis in rats. We previously found that developmental CPZ exposure alters the expression of genes related to neurogenesis, myelination, and synaptic transmission in specific brain regions of offspring. Here, we examined neuronal and glial toxicity profiles in response to postpubertal CPZ exposure by using expression microarray analysis in the hippocampal dentate gyrus, corpus callosum, cerebral cortex, and cerebellar vermis of 5-week-old male rats exposed to 0, 120, and 600 mg/kg CPZ for 28 days. Genes showing transcript upregulation were subjected to immunohistochemical analysis. We found transcript expression alterations at 600 mg/kg for genes related to synaptic transmission, Ache and Prima1, and cell cycle regulation, Tfap4 and Cdkn1a, in the dentate gyrus, which showed aberrant neurogenesis in the subgranular zone. This dose downregulated myelination-related genes in multiple brain regions, whereas KLOTHO{sup +} oligodendrocyte density was decreased only in the corpus callosum. The corpus callosum showed an increase in transcript levels for inflammatory response-related genes and in the number of CD68{sup +} microglia, MT{sup +} astrocytes, and TUNEL{sup +} apoptotic cells. These results suggest that postpubertal CPZ exposure targets synaptic transmission and cell cycle regulation to affect neurogenesis in the dentate gyrus. CPZ suppressed myelination in multiple brain regions and KLOTHO-mediated oligodendrocyte maturation only in the corpus callosum. The increased number of CD68{sup +} microglia, MT{sup +} astrocytes, and TUNEL{sup +} apoptotic cells in the corpus callosum may be involved in the induction of KLOTHO{sup +} oligodendrocyte death and be a protective mechanism against myelin damage following CPZ exposure. - Highlights: • Target gene expression profiles were examined in rats after 28-day CPZ exposure. • Multiple brain region-specific global gene expression

  1. Reflective photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Lentine, Anthony L.; Nielson, Gregory N.; Cruz-Campa, Jose Luis; Okandan, Murat; Goeke, Ronald S.

    2018-03-06

    A photovoltaic module includes colorized reflective photovoltaic cells that act as pixels. The colorized reflective photovoltaic cells are arranged so that reflections from the photovoltaic cells or pixels visually combine into an image on the photovoltaic module. The colorized photovoltaic cell or pixel is composed of a set of 100 to 256 base color sub-pixel reflective segments or sub-pixels. The color of each pixel is determined by the combination of base color sub-pixels forming the pixel. As a result, each pixel can have a wide variety of colors using a set of base colors, which are created, from sub-pixel reflective segments having standard film thicknesses.

  2. Using bathymetry and reflective seismic profiles to tests a suspected link between melt flux and cumulative fault heave at mid-ocean ridges

    Science.gov (United States)

    Haughton, G.; Murton, B. J.; Le Bas, T.; Henstock, T.

    2017-12-01

    The interplay between magma supply and spreading rate is believed to play a major role in determining large scale seafloor morphology. Here we use bathymetry to test this relationship in areas with similar spreading rates and differing magma supplies. By using open source bathymetry data we have developed a repeatable, automated method for categorising seafloor cumulative fault heave and then attempt to identify the controlling variables. We measure the total apparent fault heave along axis and off-axis at 29°N and 60°N on the Mid-Atlantic Ridge then compare this to proxies for deformation and magma supply. Two approaches are adopted for identifying faults: one using bathymetry and the other spreading-parallel seismic reflection data. The first re-examines the orthogonally spreading Broken Spur segment (26°N) spreading at 23 mm yr-1 (full rate). The other examines the Reykjanes Ridge (60°N) spreading obliquely at 21 mm yr-1 (full rate), which may be influenced by the Icelandic hotspot. Each have contrasting residual depth and structure, with the former being typical of slow spreading ridges, with marked axial valleys, whereas the latter is more typical of fast spreading ridge morphology, with smooth axial rise. We find that high total heave (indicating high tectonic spreading) on the Broken Spur segment does not correlate with high mantle Bouguer anomalies (indicating thin crust and low melt flux). From this we hypothesise that total heave on the large scale at the Broken Spur segment is not controlled by crustal thickness or melt supply. At the Raykjanes Ridge, V-shaped ridges have thicker crust (measured seismically) which converge south of Iceland. These are thought to reflect transient (every 4-6 Myrs) pulses of hot mantle radiating away from the Iceland plume. We find ridge-symmetrical variation in fault heave but with a lower frequency (6-8 Myrs) and longer wavelength (3-7 Myrs) than the V-shaped ridges. Our analysis shows that plume pulses do not

  3. TOUCH POINTS IN UNIVERSITY TUITION - CRITICAL REFLECTIONS ON PBL TUITION PRACTICE AT THE ARCHITECTURE AND URBAN DESIGN PROGRAMMES AT AALBORG UNIVERSITY, DENMARK

    Directory of Open Access Journals (Sweden)

    Anne Kirkegaard Bejder

    2017-01-01

    Full Text Available This is a discussion paper that is based on the didactics reflections of three junior academics at the Architecture and Urban Design (A&UD programme at Aalborg University. The discussion is moored in two narratives representing two typical student tuition situations. Unfolding two touch points where PBL and architectural and engineering teaching converge, this paper discusses how ‘the problem’ and ‘supervision’ at the A&UD programme are hybrid tuition focus points, where principles of PBL and more traditional tuition styles within architecture and engineering come into contact and cause didactic friction. This friction necessitates teachers and supervisors to critically reflect upon their teaching and supervision styles, and upon how ‘the problem’ is put into play in their tuition of students. The paper argues that teachers and supervisors have a heightened obligation and responsibility to monitor, assess, reflect and adjust the integration of the different teaching approaches in their hybrid tuition practices at A&UD.

  4. Application of Attenuated Total Reflectance-Fourier Transformed Infrared (ATR-FTIR) Spectroscopy To Determine the Chlorogenic Acid Isomer Profile and Antioxidant Capacity of Coffee Beans.

    Science.gov (United States)

    Liang, Ningjian; Lu, Xiaonan; Hu, Yaxi; Kitts, David D

    2016-01-27

    The chlorogenic acid isomer profile and antioxidant activity of both green and roasted coffee beans are reported herein using ATR-FTIR spectroscopy combined with chemometric analyses. High-performance liquid chromatography (HPLC) quantified different chlorogenic acid isomer contents for reference, whereas ORAC, ABTS, and DPPH were used to determine the antioxidant activity of the same coffee bean extracts. FTIR spectral data and reference data of 42 coffee bean samples were processed to build optimized PLSR models, and 18 samples were used for external validation of constructed PLSR models. In total, six PLSR models were constructed for six chlorogenic acid isomers to predict content, with three PLSR models constructed to forecast the free radical scavenging activities, obtained using different chemical assays. In conclusion, FTIR spectroscopy, coupled with PLSR, serves as a reliable, nondestructive, and rapid analytical method to quantify chlorogenic acids and to assess different free radical-scavenging capacities in coffee beans.

  5. Design, methods and demographics from phase I of Alberta's Tomorrow Project cohort: a prospective cohort profile.

    Science.gov (United States)

    Robson, Paula J; Solbak, Nathan M; Haig, Tiffany R; Whelan, Heather K; Vena, Jennifer E; Akawung, Alianu K; Rosner, William K; Brenner, Darren R; Cook, Linda S; Csizmadi, Ilona; Kopciuk, Karen A; McGregor, S Elizabeth; Friedenreich, Christine M

    2016-01-01

    Prospective cohorts have the potential to support multifactorial, health-related research, particularly if they are drawn from the general population, incorporate active and passive follow-up and permission is obtained to allow access by researchers to data repositories. This paper describes Phase I of the Alberta's Tomorrow Project cohort, a broad-based research platform designed to support investigations into factors that influence cancer and chronic disease risk. Adults aged 35-69 years living in Alberta, Canada, with no previous cancer diagnosis other than nonmelanoma skin cancer were recruited to the project by telephone-based random digit dialling. Participants were enrolled if they returned a Health and Lifestyle Questionnaire. Past year diet and physical activity questionnaires were mailed 3 months after enrolment. Consent was sought for active follow-up and linkage with administrative databases. Depending on enrolment date, participants were invited to complete up to 2 follow-up questionnaires (2004 and 2008). Between 2001 and 2009, 31 072 (39% men) participants (mean age 50.2 [± 9.2] yr) were enrolled and 99% consented to linkage with administrative databases. Participants reported a wide range of educational attainment and household income. Compared with provincial surveillance data from the Canadian Community Health Survey, Alberta's Tomorrow Project participants had higher body mass index, lower prevalence of smoking and similar distribution of chronic health conditions. Follow-up questionnaires were completed by 83% and 72% of participants in 2004 and 2008, respectively. Robust quality control measures resulted in low frequencies of missing data. Alberta's Tomorrow Project provides a robust platform, based on a prospective cohort design, to support research into risk factors for cancer and chronic disease.

  6. Design, construction and validation of a Plasmodium vivax microarray for the transcriptome profiling of clinical isolates

    KAUST Repository

    Boopathi, Pon Arunachalam

    2016-10-09

    High density oligonucleotide microarrays have been used on Plasmodium vivax field isolates to estimate whole genome expression. However, no microarray platform has been experimentally optimized for studying the transcriptome of field isolates. In the present study, we adopted both bioinformatics and experimental testing approaches to select best optimized probes suitable for detecting parasite transcripts from field samples and included them in designing a custom 15K P. vivax microarray. This microarray has long oligonucleotide probes (60 mer) that were in-situ synthesized onto glass slides using Agilent SurePrint technology and has been developed into an 8X15K format (8 identical arrays on a single slide). Probes in this array were experimentally validated and represents 4180 P. vivax genes in sense orientation, of which 1219 genes have also probes in antisense orientation. Validation of the 15K array by using field samples (n =14) has shown 99% of parasite transcript detection from any of the samples. Correlation analysis between duplicate probes (n = 85) present in the arrays showed perfect correlation (r(2) = 0.98) indicating the reproducibility. Multiple probes representing the same gene exhibited similar kind of expression pattern across the samples (positive correlation, r >= 0.6). Comparison of hybridization data with the previous studies and quantitative real-time PCR experiments were performed to highlight the microarray validation procedure. This array is unique in its design, and results indicate that the array is sensitive and reproducible. Hence, this microarray could be a valuable functional genomics tool to generate reliable expression data from P. vivax field isolates. (C) 2016 Published by Elsevier B.V.

  7. Design, construction and validation of a Plasmodium vivax microarray for the transcriptome profiling of clinical isolates

    KAUST Repository

    Boopathi, Pon Arunachalam; Subudhi, Amit; Middha, Sheetal; Acharya, Jyoti; Mugasimangalam, Raja Chinnadurai; Kochar, Sanjay Kumar; Kochar, Dhanpat Kumar; Das, Ashis

    2016-01-01

    High density oligonucleotide microarrays have been used on Plasmodium vivax field isolates to estimate whole genome expression. However, no microarray platform has been experimentally optimized for studying the transcriptome of field isolates. In the present study, we adopted both bioinformatics and experimental testing approaches to select best optimized probes suitable for detecting parasite transcripts from field samples and included them in designing a custom 15K P. vivax microarray. This microarray has long oligonucleotide probes (60 mer) that were in-situ synthesized onto glass slides using Agilent SurePrint technology and has been developed into an 8X15K format (8 identical arrays on a single slide). Probes in this array were experimentally validated and represents 4180 P. vivax genes in sense orientation, of which 1219 genes have also probes in antisense orientation. Validation of the 15K array by using field samples (n =14) has shown 99% of parasite transcript detection from any of the samples. Correlation analysis between duplicate probes (n = 85) present in the arrays showed perfect correlation (r(2) = 0.98) indicating the reproducibility. Multiple probes representing the same gene exhibited similar kind of expression pattern across the samples (positive correlation, r >= 0.6). Comparison of hybridization data with the previous studies and quantitative real-time PCR experiments were performed to highlight the microarray validation procedure. This array is unique in its design, and results indicate that the array is sensitive and reproducible. Hence, this microarray could be a valuable functional genomics tool to generate reliable expression data from P. vivax field isolates. (C) 2016 Published by Elsevier B.V.

  8. Ulcerative colitis, Crohn's disease, and irritable bowel syndrome have different profiles of extracellular matrix turnover, which also reflects disease activity in Crohn's disease

    DEFF Research Database (Denmark)

    Mortensen, Joachim Høg; Manon-Jensen, Tina; Jensen, Michael Dam

    2017-01-01

    Increased protease activity is a key pathological feature of inflammatory bowel disease (IBD). However, the differences in extracellular matrix remodelling (ECM) in Crohn's disease (CD) and ulcerative colitis (UC) are not well described. An increased understanding of the inflammatory processes may...... provide optimized disease monitoring and diagnostics. We investigated the tissue remodelling in IBD and IBS patients by using novel blood-based biomarkers reflecting ECM remodelling. Five ECM biomarkers (VICM, BGM, EL-NE, C5M, Pro-C5) were measured by competitive ELISAs in serum from 72 CD patients, 60 UC...... patients, 22 patients with irritable bowel syndrome (IBS), and 24 healthy donors. One-way analysis of variance, Mann-Whitney U-test, logistic regression models, and receiver operator characteristics (ROC) curve analysis was carried out to evaluate the diagnostic accuracy of the biomarkers. The ECM...

  9. Ulcerative colitis, Crohn's disease, and irritable bowel syndrome have different profiles of extracellular matrix turnover, which also reflects disease activity in Crohn's disease.

    Directory of Open Access Journals (Sweden)

    Joachim Høg Mortensen

    Full Text Available Increased protease activity is a key pathological feature of inflammatory bowel disease (IBD. However, the differences in extracellular matrix remodelling (ECM in Crohn's disease (CD and ulcerative colitis (UC are not well described. An increased understanding of the inflammatory processes may provide optimized disease monitoring and diagnostics. We investigated the tissue remodelling in IBD and IBS patients by using novel blood-based biomarkers reflecting ECM remodelling.Five ECM biomarkers (VICM, BGM, EL-NE, C5M, Pro-C5 were measured by competitive ELISAs in serum from 72 CD patients, 60 UC patients, 22 patients with irritable bowel syndrome (IBS, and 24 healthy donors. One-way analysis of variance, Mann-Whitney U-test, logistic regression models, and receiver operator characteristics (ROC curve analysis was carried out to evaluate the diagnostic accuracy of the biomarkers.The ECM remodelling was significantly different in UC compared to CD. The best biomarker combination to differentiate UC from CD and colonic CD was BGM and VICM (AUC = 0.98, P5mg/mL, correlation of Pro-C5 (r = 0.36 with CDAI was slightly improved compared to CRP (r = 0.27 corrected for the use of immunosuppressant. Furthermore, BGM and EL-NE biomarkers were highly associated with colon inflammation in CD patients.ECM fragments of tissue remodelling in IBD affect UC and CD differently, and may aid in differentiating IBD from IBS (EL-NE, BGM, Pro-C5, and UC from CD patients (BGM, VICM. Formation of type V collagen is related to the level of inflammation in CD and may reflect disease activity in CD.

  10. Universal design and the challenge of diversity: reflections on the principles of UD, based on empirical research of people's mobility.

    Science.gov (United States)

    Winance, Myriam

    2014-01-01

    The author analyses some theoretical presuppositions of the Universal Design approach. She shows that it is based on two paradoxes: (1) it reduces diversity to the "universal", (2) it depends on an asymmetrical view of abilities and disabilities. The author suggests a way of changing this concept in order to take into account uniqueness and diversity, in order to allow the shaping of abilities. The data are taken from an ethnographical survey carried out between 2007 and 2009 made up of in-depth interviews with wheelchair users and their families. The interviews were analysed inductively using the Nvivo© programme. The mobility of people in wheelchairs, and their capacity to act, are linked to their particular experience and are the result of a process of adjustment and arrangement. This process involves specific and varied resources and leads to changes in the individuals, in their dis/abilites, but also in their perceptions. This analysis leads to a change in the question of policy. This question is no longer "how to include diversity using the definition of 'universal'", but "how to bring out and articulate this diversity, so as to vary the qualities of persons and the world in which they live". Implications for Rehabilitation "Inaccessibility" is analysed in terms of a discrepancy between the user and her/his environment and in terms of experience. Accessibility is analysed as a process of adjustment and practical arrangements between the person and her/his environment. The universalism of Universal Design is criticized in the way it tries to force the variety of users into the uniqueness of one materiality. Emphasis is put on diversity and the necessity of articulating this diversity in a plural world offering various resources that individuals can call upon to act, depending on what they are and on what they want to become.

  11. Three-dimensional structures in the design of therapeutics targeting parasitic protozoa: reflections on the past, present and future.

    Science.gov (United States)

    Hol, Wim G J

    2015-05-01

    Parasitic protozoa cause a range of diseases which threaten billions of human beings. They are responsible for tremendous mortality and morbidity in the least-developed areas of the world. Presented here is an overview of the evolution over the last three to four decades of structure-guided design of inhibitors, leads and drug candidates aiming at targets from parasitic protozoa. Target selection is a crucial and multi-faceted aspect of structure-guided drug design. The major impact of advances in molecular biology, genome sequencing and high-throughput screening is touched upon. The most advanced crystallographic techniques, including XFEL, have already been applied to structure determinations of drug targets from parasitic protozoa. Even cryo-electron microscopy is contributing to our understanding of the mode of binding of inhibitors to parasite ribosomes. A number of projects have been selected to illustrate how structural information has assisted in arriving at promising compounds that are currently being evaluated by pharmacological, pharmacodynamic and safety tests to assess their suitability as pharmaceutical agents. Structure-guided approaches are also applied to incorporate properties into compounds such that they are less likely to become the victim of resistance mechanisms. A great increase in the number of novel antiparasitic compounds will be needed in the future. These should then be combined into various multi-compound therapeutics to circumvent the diverse resistance mechanisms that render single-compound, or even multi-compound, drugs ineffective. The future should also see (i) an increase in the number of projects with a tight integration of structural biology, medicinal chemistry, parasitology and pharmaceutical sciences; (ii) the education of more `medicinal structural biologists' who are familiar with the properties that compounds need to have for a high probability of success in the later steps of the drug-development process; and (iii) the

  12. Structure across the northeastern margin of Flemish Cap, offshore Newfoundland from Erable multichannel seismic reflection profiles: evidence for a transtensional rifting environment

    Science.gov (United States)

    Welford, J. Kim; Hall, Jeremy; Sibuet, Jean-Claude; Srivastava, Shiri P.

    2010-11-01

    We present the results from processing and interpreting nine multichannel seismic reflection lines collected during the 1992 Erable experiment over the northeastern margin of Flemish Cap offshore Newfoundland. These lines, combined into five cross-sections, provide increased seismic coverage over this lightly probed section of the margin and reveal tectonically significant along-strike variations in the degree and compartmentalization of crustal thinning. Similar to the southeastern margins of Flemish Cap and the Grand Banks, a transitional zone of exhumed serpentinized mantle is interpreted between thinned continental and oceanic crust. The 25 km wide transitional zone bears similarities to the 120 km wide transitional zone interpreted as exhumed serpentinized mantle on the conjugate Irish Atlantic margin but the significant width difference is suggestive of an asymmetric conjugate pair. A 40-50 km wide zone of inferred strike-slip shearing is interpreted and observed to extend along most of the northeastern margin of Flemish Cap. Individual shear zones (SZs) may represent extensions of SZs and normal faults within the Orphan Basin providing further evidence for the rotation and displacement of Flemish Cap out of Orphan Basin. The asymmetry between the Flemish Cap and Irish conjugate pairs is likely due in large part to the rotation and displacement of Flemish Cap which resulted in the Flemish Cap margin displaying features of both a strike-slip margin and an extensional margin.

  13. A new medium for Caenorhabditis elegans toxicology and nanotoxicology studies designed to better reflect natural soil solution conditions.

    Science.gov (United States)

    Tyne, William; Lofts, Stephen; Spurgeon, David J; Jurkschat, Kerstin; Svendsen, Claus

    2013-08-01

    A new toxicity test medium for Caenorhabditis elegans is presented. The test solution is designed to provide a better representation of natural soil pore water conditions than currently available test media. The medium has a composition that can readily be modified to allow for studies of the influences of a range of environmentally relevant parameters on nematode biology and toxicology. Tests conducted in the new medium confirmed that nematodes' reproduction was possible at a range of solution pH levels, offering the potential to conduct toxicity studies under a variety of conditions. A test to establish silver nanoparticle and dissolved silver nitrate toxicity, a study type not feasible in M9 or agar media due to precipitation and nanoparticle agglomeration, indicated lower silver nanoparticle (median effective concentration [EC50] of 6.5 mg Ag/L) than silver nitrate (EC50 0.28 mg Ag/L) toxicity. Characterization identified stable nanoparticle behavior in the new test medium. Copyright © 2013 SETAC.

  14. Thick deltaic sedimentation and detachment faulting delay the onset of continental rupture in the Northern Gulf of California: Analysis of seismic reflection profiles

    Science.gov (United States)

    Martin, A.; González-Escobar, M.; Fletcher, J. M.; Pacheco, M.; Oskin, M. E.; Dorsey, R. J.

    2013-12-01

    The transition from distributed continental extension to the rupture of continental lithosphere is imaged in the northern Gulf of California across the obliquely conjugate Tiburón-Upper Delfín basin segment. Structural mapping on a 5-20 km grid of seismic reflection lines of Petroleos Mexicanos (PEMEX) demonstrates that ~1000% extension is accommodated on a series of NNE-striking listric-normal faults that merge at depth into a detachment fault. The detachment juxtaposes a late-Neogene marine sequence over thinned continental crust and contains an intrabasinal divide due to footwall uplift. Two northwest striking, dextral-oblique faults bound both ends of the detachment and shear the continental crust parallel to the tectonic transport. A regional unconformity in the upper 0.5 seconds (TWTT) and crest erosion of rollover anticlines above the detachment indicates inversion and footwall uplift during the lithospheric rupture in the Upper Delfin and Lower Delfin basins. The maximum length of new crust in both Delfin basins is less than 40 km based on the lack of an acoustic basement and the absence of a lower sedimentary sequence beneath a wedge shaped upper sequence that reaches >5 km in thickness. A fundamental difference exists between the Tiburón-Delfin segment and the Guaymas segment to the south in terms of presence of low angle normal faults and amount of new oceanic lithosphere, which we attribute to thermal insulation, diffuse upper-plate extension, and slip on low angle normal faults engendered by a thick sedimentary lid.

  15. Lamont Doherty Seismic Reflection Scanned Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains single channel seismic reflection profiles as provided to NGDC by Lamont Doherty Earh Observatory (LDEO). The profiles were originally...

  16. Mechanical energy profiles of the combined ankle-foot system in normal gait: insights for prosthetic designs.

    Science.gov (United States)

    Takahashi, Kota Z; Stanhope, Steven J

    2013-09-01

    Over the last half-century, the field of prosthetic engineering has continuously evolved with much attention being dedicated to restoring the mechanical energy properties of ankle joint musculatures during gait. However, the contributions of 'distal foot structures' (e.g., foot muscles, plantar soft tissue) have been overlooked. Therefore, the purpose of this study was to quantify the total mechanical energy profiles (e.g., power, work, and work-ratio) of the natural ankle-foot system (NAFS) by combining the contributions of the ankle joint and all distal foot structures during stance in level-ground steady state walking across various speeds (0.4, 0.6, 0.8 and 1.0 statures/s). The results from eleven healthy subjects walking barefoot indicated ankle joint and distal foot structures generally performed opposing roles: the ankle joint performed net positive work that systematically increased its energy generation with faster walking speeds, while the distal foot performed net negative work that systematically increased its energy absorption with faster walking speeds. Accounting for these simultaneous effects, the combined ankle-foot system exhibited increased work-ratios with faster walking. Most notably, the work-ratio was not significantly greater than 1.0 during the normal walking speed of 0.8 statures/s. Therefore, a prosthetic design that strategically exploits passive-dynamic properties (e.g., elastic energy storage and return) has the potential to replicate the mechanical energy profiles of the NAFS during level-ground steady-state walking. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Mechanical design control and implementation of a new movable intensity profile beamline monitor for the TRIUMF parity experiment 497

    Science.gov (United States)

    Ries, Thomas C.

    1995-05-01

    Two new movable beam intensity profile monitors have been installed into the TRIUMF Parity Experiment 497 Beamlines. Each unit serves two functions. Firstly, the beam median position, in a plane normal to the beam, is detected by split plate Secondary Emission Monitors. This information is used to lock the beam into the position of the movable monitor to within a few μm's via high band width ferrite core steering magnets operating in tandem in a closed loop servo feedback control system. Secondly, the beam profile and intensity is detected via a multi-wire secondary emission non-movable monitor, where the data provides high precision values regarding centroidal positions and profiles. The centroid position of the beam is statistically determined to an accuracy of ±10 μm from a data record length of 1 second. The design of each device adheres to strict standards of mechanically rigid construction. The split plate SEM accuracy and repeatability is better than 15 μm with an absolute resolution limit of 0.4 μm. Maximum travel is 2 inches in the vertical plane. Since the device is mechanically modular and both degrees of freedom are combined into a single mechanical unit, fast and easy handling is possible for maintenance in radioactive areas. The actuators are dc servo motors with tachometers driven by linear servo power amplifiers. These amplifiers are used in lieu of pulse width modulated amps to eliminate noise produced by the switching circuits. Position sensing is done by variable reluctance type absolute rotary encoders providing 16 bit resolution over the full range of travel. Positioning is done manually using a self centring potentiometer on the control panel that provides a ± velocity command signal to the power amplifiers. This configuration ensures good controllability over a very large range of positioning speeds hence making 0.4 μm incremental positioning possible, as well as, fast relocations over large relative distances. The precision movement

  18. Personal Reflections

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education. Personal Reflections. Articles in Resonance – Journal of Science Education. Volume 6 Issue 3 March 2001 pp 90-93 Personal Reflections. Why did I opt for Career in Science? Jayant V Narlikar · More Details Fulltext PDF. Volume 9 Issue 8 August 2004 pp 89-89 ...

  19. Reflection groups

    International Nuclear Information System (INIS)

    Eggermont, G.

    2006-01-01

    In 2005, PISA organised proactive meetings of reflection groups on involvement in decision making, expert culture and ethical aspects of radiation protection.All reflection group meetings address particular targeted audiences while the output publication in book form is put forward

  20. Reflection ciphers

    DEFF Research Database (Denmark)

    Boura, Christina; Canteaut, Anne; Knudsen, Lars Ramkilde

    2017-01-01

    study the necessary properties for this coupling permutation. Special care has to be taken of some related-key distinguishers since, in the context of reflection ciphers, they may provide attacks in the single-key setting.We then derive some criteria for constructing secure reflection ciphers...

  1. A novel experimental design method to optimize hydrophilic matrix formulations with drug release profiles and mechanical properties.

    Science.gov (United States)

    Choi, Du Hyung; Lim, Jun Yeul; Shin, Sangmun; Choi, Won Jun; Jeong, Seong Hoon; Lee, Sangkil

    2014-10-01

    To investigate the effects of hydrophilic polymers on the matrix system, an experimental design method was developed to integrate response surface methodology and the time series modeling. Moreover, the relationships among polymers on the matrix system were studied with the evaluation of physical properties including water uptake, mass loss, diffusion, and gelling index. A mixture simplex lattice design was proposed while considering eight input control factors: Polyethylene glycol 6000 (x1 ), polyethylene oxide (PEO) N-10 (x2 ), PEO 301 (x3 ), PEO coagulant (x4 ), PEO 303 (x5 ), hydroxypropyl methylcellulose (HPMC) 100SR (x6 ), HPMC 4000SR (x7 ), and HPMC 10(5) SR (x8 ). With the modeling, optimal formulations were obtained depending on the four types of targets. The optimal formulations showed the four significant factors (x1 , x2 , x3 , and x8 ) and other four input factors (x4 , x5 , x6 , and x7 ) were not significant based on drug release profiles. Moreover, the optimization results were analyzed with estimated values, targets values, absolute biases, and relative biases based on observed times for the drug release rates with four different targets. The result showed that optimal solutions and target values had consistent patterns with small biases. On the basis of the physical properties of the optimal solutions, the type and ratio of the hydrophilic polymer and the relationships between polymers significantly influenced the physical properties of the system and drug release. This experimental design method is very useful in formulating a matrix system with optimal drug release. Moreover, it can distinctly confirm the relationships between excipients and the effects on the system with extensive and intensive evaluations. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  2. Reflected Glory

    Science.gov (United States)

    2011-02-01

    The nebula Messier 78 takes centre stage in this image taken with the Wide Field Imager on the MPG/ESO 2.2-metre telescope at the La Silla Observatory in Chile, while the stars powering the bright display take a backseat. The brilliant starlight ricochets off dust particles in the nebula, illuminating it with scattered blue light. Igor Chekalin was the overall winner of ESO's Hidden Treasures 2010 astrophotography competition with his image of this stunning object. Messier 78 is a fine example of a reflection nebula. The ultraviolet radiation from the stars that illuminate it is not intense enough to ionise the gas to make it glow - its dust particles simply reflect the starlight that falls on them. Despite this, Messier 78 can easily be observed with a small telescope, being one of the brightest reflection nebulae in the sky. It lies about 1350 light-years away in the constellation of Orion (The Hunter) and can be found northeast of the easternmost star of Orion's belt. This new image of Messier 78 from the MPG/ESO 2.2-metre telescope at the La Silla Observatory is based on data selected by Igor Chekalin in his winning entry to the Hidden Treasures competition [1]. The pale blue tint seen in the nebula in this picture is an accurate representation of its dominant colour. Blue hues are commonly seen in reflection nebulae because of the way the starlight is scattered by the tiny dust particles that they contain: the shorter wavelength of blue light is scattered more efficiently than the longer wavelength red light. This image contains many other striking features apart from the glowing nebula. A thick band of obscuring dust stretches across the image from the upper left to the lower right, blocking the light from background stars. In the bottom right corner, many curious pink structures are also visible, which are created by jets of material being ejected from stars that have recently formed and are still buried deep in dust clouds. Two bright stars, HD 38563A and

  3. Nursing students' evaluation of a new feedback and reflection tool for use in high-fidelity simulation - Formative assessment of clinical skills. A descriptive quantitative research design.

    Science.gov (United States)

    Solheim, Elisabeth; Plathe, Hilde Syvertsen; Eide, Hilde

    2017-11-01

    Clinical skills training is an important part of nurses' education programmes. Clinical skills are complex. A common understanding of what characterizes clinical skills and learning outcomes needs to be established. The aim of the study was to develop and evaluate a new reflection and feedback tool for formative assessment. The study has a descriptive quantitative design. 129 students participated who were at the end of the first year of a Bachelor degree in nursing. After highfidelity simulation, data were collected using a questionnaire with 19 closed-ended and 2 open-ended questions. The tool stimulated peer assessment, and enabled students to be more thorough in what to assess as an observer in clinical skills. The tool provided a structure for selfassessment and made visible items that are important to be aware of in clinical skills. This article adds to simulation literature and provides a tool that is useful in enhancing peer learning, which is essential for nurses in practice. The tool has potential for enabling students to learn about reflection and developing skills for guiding others in practice after they have graduated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Quality evaluation of low fat bologna-type meat product with a nutritional profile designed for the elderly.

    Science.gov (United States)

    Reyes-Padilla, Elizabeth; Valenzuela-Melendres, Martín; Camou, Juan Pedro; Sebranek, Joseph G; Alemán-Mateo, Heliodoro; Dávila-Ramírez, José Luis; Cumplido-Barbeitia, German; González-Ríos, Humberto

    2018-01-01

    The objective of this work was to evaluate the quality of a bologna-type meat product designed for the elderly. Treatments were: control, without addition of cranberries (C), prunes (P), pecan nuts (N) or flaxseed (F); NP, with 5% N+5% P; FC, with 5% F+5% C; NC, with 5% N+5% C; FP, with 5% F+5% P. These formulations resulted in a product with high protein, low SFA and high antioxidant activity. Treatments with pecan nuts had higher MUFA while those with flaxseed had higher polyunsaturated fatty acids (PUFA). Treatments with pecan nuts and flaxseed had higher PUFA/SFA ratios, but only those with flaxseed had very low n6/n3 ratios when compared to the control. Although treatments showed acceptable scores (>5.4), they were lower than the control. A combination of these non-traditional ingredients could be used to develop a meat product for older adults to provide a better nutritional profile with acceptable sensory properties. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. The HIV Risk Profiles of Latino Sexual Minorities and Transgender Persons Who Use Websites or Apps Designed for Social and Sexual Networking

    Science.gov (United States)

    Sun, Christina J.; Reboussin, Beth; Mann, Lilli; Garcia, Manuel; Rhodes, Scott D.

    2016-01-01

    The use of websites and GPS-based mobile applications ("apps") designed for social and sexual networking has been associated with increased HIV risk; however, little is known about Latino sexual minorities' and transgender persons' use of these websites and apps and the risk profiles of those who use them compared with those who do not.…

  6. Reflectance Modeling

    Science.gov (United States)

    Smith, J. A.; Cooper, K.; Randolph, M.

    1984-01-01

    A classical description of the one dimensional radiative transfer treatment of vegetation canopies was completed and the results were tested against measured prairie (blue grama) and agricultural canopies (soybean). Phase functions are calculated in terms of directly measurable biophysical characteristics of the canopy medium. While the phase functions tend to exhibit backscattering anisotropy, their exact behavior is somewhat more complex and wavelength dependent. A Monte Carlo model was developed that treats soil surfaces with large periodic variations in three dimensions. A photon-ray tracing technology is used. Currently, the rough soil surface is described by analytic functions and appropriate geometric calculations performed. A bidirectional reflectance distribution function is calculated and, hence, available for other atmospheric or canopy reflectance models as a lower boundary condition. This technique is used together with an adding model to calculate several cases where Lambertian leaves possessing anisotropic leaf angle distributions yield non-Lambertian reflectance; similar behavior is exhibited for simulated soil surfaces.

  7. Design of a Heterotetravalent Synthetic Allergen That Reflects Epitope Heterogeneity and IgE Antibody Variability to Study Mast Cell Degranulation

    Science.gov (United States)

    Handlogten, Michael W.; Kiziltepe, Tanyel; Bilgicer, Basar

    2013-01-01

    SYNOPSIS This study describes the design of a heterotetravalent allergen (HtTA) as a multi-component experimental system that enables an integrative approach to study mast cell degranulation. The HtTA design allows presentation of two distinct haptens, each with a valency of two, thereby better reflecting the complexity of natural allergens by displaying epitope heterogeneity and IgE antibody variability. Using the HtTA design, synthetic allergens HtTA-1 and HtTA-2 were synthesized to model a combination of epitope/IgE affinities. HtTA-1 presented DNP and dansyl haptens (Kd = 22 and 54 nM for IgEDNP and IgEdansyl respectively), and HtTA-2 presented dansyl and the weak affinity DNP-Pro haptens (Kd = 550 nM for IgEDNP). Both HtTAs effectively induced degranulation when mast cells were primed with both IgEDNP and IgEdansyl antibodies. Interestingly, tetravalent DNP-Pro or bivalent dansyl were insufficient in stimulating a degranulation response, illustrating the significance of valency, affinity, and synergy in allergen-IgE interactions. Importantly, maximum degranulation with both HtTA-1 and HtTA-2 was observed when only 50% of the mast cell-bound IgEs were hapten specific (25% IgEdansyl + 25% IgEDNP). Taken together, this study establishes the HtTA system as a physiologically relevant experimental model and demonstrates its utility in elucidating critical mechanisms of mast cell degranulation. PMID:23050868

  8. Development and experimental assessment of a numerical modelling code to aid the design of profile extrusion cooling tools

    Science.gov (United States)

    Carneiro, O. S.; Rajkumar, A.; Fernandes, C.; Ferrás, L. L.; Habla, F.; Nóbrega, J. M.

    2017-10-01

    On the extrusion of thermoplastic profiles, upon the forming stage that takes place in the extrusion die, the profile must be cooled in a metallic calibrator. This stage must be done at a high rate, to assure increased productivity, but avoiding the development of high temperature gradients, in order to minimize the level of induced thermal residual stresses. In this work, we present a new coupled numerical solver, developed in the framework of the OpenFOAM® computational library, that computes the temperature distribution in both domains simultaneously (metallic calibrator and plastic profile), whose implementation aimed the minimization of the computational time. The new solver was experimentally assessed with an industrial case study.

  9. Layered magnets: polarized neutron reflection studies

    Energy Technology Data Exchange (ETDEWEB)

    Zabel, H; Schreyer, A [Ruhr-Univ. Bochum, Lehrstuhl fuer Experimentalphysik/Festkoerperphysik, Bochum (Germany)

    1996-11-01

    Neutron reflectivity measurements from extended surfaces, thin films and superlattices provide information on the chemical profile parallel to the film normal, including film thicknesses, average composition and interfacial roughness parameters. Reflectivity measurements with polarized neutrons are particularly powerful for analyzing the magnetic density profiles in thin films and superlattices in addition to chemical profiles. The basic theory of polarized neutron reflectivity is provided, followed by some examples and more recent applications concerning polarized neutron reflectivity studies from exchange coupled Fe/Cr superlattices. (author) 5 figs., 13 refs.

  10. Design and Operation of Automated Ice-Tethered Profilers for Real-Time Seawater Observations in the Polar Oceans

    National Research Council Canada - National Science Library

    Toole, J; Proshutinsky, A; Krishfield, R; Doherty, K; Frye, Daniel E; Hammar, T; Kemp, J; Peters, D; Heydt, K. von der

    2006-01-01

    An automated, easily-deployed Ice-Tethered Profiler (ITP) has been developed for deployment on perennial sea ice in polar oceans to measure changes in upper ocean temperature and salinity in all seasons...

  11. The determination of the chemical composition profile of the GaAs/AlGaAs heterostructures designed for quantum cascade lasers by means of synchrotron radiation

    International Nuclear Information System (INIS)

    Gaca, Jaroslaw; Wojcik, Marek; Bugajski, Maciej; Kosiel, Kamil

    2011-01-01

    The chemical composition profile of the GaAs/AlGaAs quantum cascade structures grown on (0 0 1) GaAs substrate by molecular beam epitaxy is studied by a synchrotron radiation high-resolution X-ray diffraction. The analysis is carried out for the whole structure as well for its parts. In order to determine some structural parameters, such as: the thickness and chemical composition of each layer making up the investigated structure, the profile of the interface between succeeding layers, and the preservation of the structure periodicity, the experimental X-ray diffraction profiles are compared with simulated ones calculated by means of Darwin dynamical theory of X-ray diffraction. It is shown that this method gives correct chemical composition profiles and allows for the evaluation of the deviations from the designed values of the structural parameters in most investigated cases. Limits of the method are discussed, especially by the determination of the chemical composition profile for thin heterostructures, such as those making active or injector regions.

  12. Reflective Efficacy

    Directory of Open Access Journals (Sweden)

    Carla Bagnoli

    2018-04-01

    Full Text Available The purpose of this paper is to highlight some difficulties of Neil Sinhababu’s Humean theory of agency, which depend on his radically reductivist approach, rather than to his Humean sympathies. The argument is that Sinhababu’s theory builds upon a critique of reflective agency which is based on equivocation and misunderstandings of the Kantian approach. Ultimately, the objection is that his reductivist view is unequipped to address the rclassical problems of rational deliberation and agential authority.

  13. Optimizing the design of vertical seismic profiling (VSP) for imaging fracture zones over hardrock basement geothermal environments

    Science.gov (United States)

    Reiser, Fabienne; Schmelzbach, Cedric; Maurer, Hansruedi; Greenhalgh, Stewart; Hellwig, Olaf

    2017-04-01

    A primary focus of geothermal seismic imaging is to map dipping faults and fracture zones that control rock permeability and fluid flow. Vertical seismic profiling (VSP) is therefore a most valuable means to image the immediate surroundings of an existing borehole to guide, for example, the placing of new boreholes to optimize production from known faults and fractures. We simulated 2D and 3D acoustic synthetic seismic data and processed it through to pre-stack depth migration to optimize VSP survey layouts for mapping moderately to steeply dipping fracture zones within possible basement geothermal reservoirs. Our VSP survey optimization procedure for sequentially selecting source locations to define the area where source points are best located for optimal imaging makes use of a cross-correlation statistic, by which a subset of migrated shot gathers is compared with a target or reference image from a comprehensive set of source gathers. In geothermal exploration at established sites, it is reasonable to assume that sufficient à priori information is available to construct such a target image. We generally obtained good results with a relatively small number of optimally chosen source positions distributed over an ideal source location area for different fracture zone scenarios (different dips, azimuths, and distances from the surveying borehole). Adding further sources outside the optimal source area did not necessarily improve the results, but rather resulted in image distortions. It was found that fracture zones located at borehole-receiver depths and laterally offset from the borehole by 300 m can be imaged reliably for a range of the different dips, but more source positions and large offsets between sources and the borehole are required for imaging steeply dipping interfaces. When such features cross-cut the borehole, they are particularly difficult to image. For fracture zones with different azimuths, 3D effects are observed. Far offset source positions

  14. Historical Text Comprehension Reflective Tutorial Dialogue System

    Science.gov (United States)

    Grigoriadou, Maria; Tsaganou, Grammatiki; Cavoura, Theodora

    2005-01-01

    The Reflective Tutorial Dialogue System (ReTuDiS) is a system for learner modelling historical text comprehension through reflective dialogue. The system infers learners' cognitive profiles and constructs their learner models. Based on the learner model the system plans the appropriate--personalized for learners--reflective tutorial dialogue in…

  15. Wave Reflection Model Tests

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Larsen, Brian Juul

    The investigation concerns the design of a new internal breakwater in the main port of Ibiza. The objective of the model tests was in the first hand to optimize the cross section to make the wave reflection low enough to ensure that unacceptable wave agitation will not occur in the port. Secondly...

  16. On Reflection

    DEFF Research Database (Denmark)

    Blasco, Maribel

    2012-01-01

    produces: that the self is accessible and transcendable, that reflexivity is universal across space and time, and that the self can act as its own remedial change agent or ‘inner consultant.’ I argue that because reflexivity is understood in many different ways, attention to definition is crucial, both...... on the concepts of selfhood that prevail and how notions of difference are constructed. First, I discuss how the dominant usages of reflexivity in intercultural education reflect and reproduce a Cartesian view of the self that shapes how ICC is conceptualized and taught. I discuss three assumptions that this view...

  17. Inspiring Reflections

    DEFF Research Database (Denmark)

    Muchie, Mammo

    2011-01-01

    A numberof Chris Freeman's colleagues were asked to reflect on what they thought describes his life and work in a few words. Some of the colleagues replied including former SPRU students that were taught or supervised by Chris Freeman. Their views on what they thought were Chris Freeman's defining...... life is not free from fluctuations, cycles, disruptions, crises and destructions both human and ecological. Innovation research ought to position itself to address environmental, financial and economic crises. The third is innovation research for development by addressing not only poverty erdaication...

  18. Reflective Writing

    DEFF Research Database (Denmark)

    Ahrenkiel Jørgensen, Andriette

    2016-01-01

    In Breve fra min Have (Letters from my Garden), the Swedish landscape architect, Sven-Ingvar Andersson, produces dialogues about his garden to a wide circle of friends, colleagues, deceased and still living acquaintances such as Karen Blixen, Gertrude Stein, C. Th. Sørensen, Albrecht Dürer, Peter...... Høeg etetera. The dialogues work as a tool of reflection in terms of providing opportunity to examine his own beliefs, to explore the possible reasons for engaging in a particular activity. On the basis of Sven-Ingvar Andersson’s book a teaching program at the Aarhus School of Architecture provides...

  19. Reflective Packaging

    Science.gov (United States)

    1994-01-01

    The aluminized polymer film used in spacecraft as a radiation barrier to protect both astronauts and delicate instruments has led to a number of spinoff applications. Among them are aluminized shipping bags, food cart covers and medical bags. Radiant Technologies purchases component materials and assembles a barrier made of layers of aluminized foil. The packaging reflects outside heat away from the product inside the container. The company is developing new aluminized lines, express mailers, large shipping bags, gel packs and insulated panels for the building industry.

  20. An assessment of the Living Laboratory approach for collaborative innovation and design of the Regional Spatial Profiler

    CSIR Research Space (South Africa)

    Mlangeni, P

    2012-10-01

    Full Text Available , and students engaged in a two-day collaborative course. The collaborative sessions consisted of various practical work sessions, where participants confirmed and refined the use-case, and set out detailed user requirements in terms of both the Profiler...

  1. Bragg reflection program

    International Nuclear Information System (INIS)

    Lynn, J.W.

    This user's guide to the Bragg Reflection Program (BRP) is in the nature of an informal report. The general purpose of BRP is to scan a series of Bragg reflections automatically in order to obtain profiles and integrated intensities. The program is used in conjunction with the SUPERVISOR and READ packages, and the procedures for using it are similar to those for the Triple-Axis Control program. All the general features of the system, SUPERVISOR and READ packages as described in the Spectrometer Control Systems User's Guide are preserved. The presentation assumes that the reader is familiar with these. Sections are given on the READ package, execution and use, error messages, and output. A few sample problems are shown. (1 figure) (U.S.)

  2. Injury profile SIMulator, a Qualitative aggregative modelling framework to predict injury profile as a function of cropping practices, and abiotic and biotic environment. II. Proof of concept: design of IPSIM-wheat-eyespot.

    Science.gov (United States)

    Robin, Marie-Hélène; Colbach, Nathalie; Lucas, Philippe; Montfort, Françoise; Cholez, Célia; Debaeke, Philippe; Aubertot, Jean-Noël

    2013-01-01

    IPSIM (Injury Profile SIMulator) is a generic modelling framework presented in a companion paper. It aims at predicting a crop injury profile as a function of cropping practices and abiotic and biotic environment. IPSIM's modelling approach consists of designing a model with an aggregative hierarchical tree of attributes. In order to provide a proof of concept, a model, named IPSIM-Wheat-Eyespot, has been developed with the software DEXi according to the conceptual framework of IPSIM to represent final incidence of eyespot on wheat. This paper briefly presents the pathosystem, the method used to develop IPSIM-Wheat-Eyespot using IPSIM's modelling framework, simulation examples, an evaluation of the predictive quality of the model with a large dataset (526 observed site-years) and a discussion on the benefits and limitations of the approach. IPSIM-Wheat-Eyespot proved to successfully represent the annual variability of the disease, as well as the effects of cropping practices (Efficiency = 0.51, Root Mean Square Error of Prediction = 24%; bias = 5.0%). IPSIM-Wheat-Eyespot does not aim to precisely predict the incidence of eyespot on wheat. It rather aims to rank cropping systems with regard to the risk of eyespot on wheat in a given production situation through ex ante evaluations. IPSIM-Wheat-Eyespot can also help perform diagnoses of commercial fields. Its structure is simple and permits to combine available knowledge in the scientific literature (data, models) and expertise. IPSIM-Wheat-Eyespot is now available to help design cropping systems with a low risk of eyespot on wheat in a wide range of production situations, and can help perform diagnoses of commercial fields. In addition, it provides a proof of concept with regard to the modelling approach of IPSIM. IPSIM-Wheat-Eyespot will be a sub-model of IPSIM-Wheat, a model that will predict injury profile on wheat as a function of cropping practices and the production situation.

  3. A design tool to study the impact of mission-profile on the reliability of SiC-based PV-inverter devices

    DEFF Research Database (Denmark)

    Sintamarean, Nicolae Cristian; Wang, Huai; Blaabjerg, Frede

    2014-01-01

    and is further used as an input to a lifetime model. The proposed reliability oriented design tool is used to study the impact of MP and device degradation (aging) in the PV-inverter lifetime. The obtained results indicate that the MP of the field where the PV-inverter is operating has an important impact......This paper introduces a reliability-oriented design tool for a new generation of grid connected PV-inverters. The proposed design tool consists of a real field mission profile model (for one year operation in USA-Arizona), a PV-panel model, a grid connected PV-inverter model, an electro......-thermal model and the lifetime model of the power semiconductor devices. A simulation model able to consider one year real field operation conditions (solar irradiance and ambient temperature) is developed. Thus, one year estimation of the converter devices thermal loading distribution is achieved...

  4. Postgraduate Education to Support Organisation Change: A Reflection on Reflection

    Science.gov (United States)

    Stewart, Jim; Keegan, Anne; Stevens, Pam

    2008-01-01

    Purpose: This paper aims to explore how teaching and assessing reflective learning skills can support postgraduate practitioners studying organisational change and explores the challenges for tutors in assessing these journals. Design/methodology/approach: Assessment criteria were developed from the literature on reflective practice and…

  5. Towards an Understanding of the Social Aspects of Sustainability in Product Design: Teaching HE Students in the UK and Ireland through Reflection and Peer Learning

    Science.gov (United States)

    Watkins, Matthew

    2014-01-01

    This paper presents findings from a doctoral study, which investigated effective methods for teaching social sustainability within product design courses in British and Irish universities. This paper explores approaches for encouraging students to explore the social aspects of sustainable product design through workshops specifically designed to…

  6. Biology Reflective Assessment Curriculum

    Science.gov (United States)

    Bayley, Cheryl Ann

    Often students and educators view assessments as an obligation and finality for a unit. In the current climate of high-stakes testing and accountability, the balance of time, resources and emphasis on students' scores related to assessment have been slanted considerably toward the summative side. This tension between assessment for accountability and assessment to inform teaching strains instruction and educators' ability to use that information to design learning opportunities that help students develop deeper conceptual understanding. A substantive body of research indicates that formative and reflective assessment can significantly improve student learning. Biology Reflective Assessment Curriculum (BRAC) examines support provided for high school science students through assessment practices. This investigation incorporates the usage of reflective assessments as a guiding practice for differentiated instruction and student choice. Reflective assessment is a metacognitive strategy that promotes self-monitoring and evaluation. The goals of the curriculum are to promote self-efficacy and conceptual understanding in students learning biology through developing their metacognitive awareness. BRAC was implemented in a high school biology classroom. Data from assessments, metacognitive surveys, self-efficacy surveys, reflective journals, student work, a culminating task and field notes were used to evaluate the effectiveness of the curriculum. The results suggest that students who develop their metacognitive skills developed a deeper conceptual understanding and improved feelings of self-efficacy when they were engaged in a reflective assessment unit embedded with student choice. BRAC is a tool for teachers to use assessments to assist students in becoming metacognitive and to guide student choice in learning opportunities.

  7. Analysis for reflection peaks of multiple-phase-shift based sampled fiber Bragg gratings and application in high channel-count filter design.

    Science.gov (United States)

    Wen, Kun Hua; Yan, Lian Shan; Pan, Wei; Luo, Bin; Zou, Xi Hua; Ye, Jia; Ma, Ya Nan

    2009-10-10

    An analytical expression for calculating the reflection-peak wavelengths (RPWs) of a uniform sampled fiber Bragg grating (SFBG) with the multiple-phase-shift (MPS) technique is derived through Fourier transform of the index modulation. The new expression can accurately depict the RPWs incorporating various parameters such as the duty cycle and the DC index change. The effectiveness of the derived expression is further confirmed by comparing the RPWs estimated from the expression with the simulated reflective spectra using the piecewise uniform method. And the reflective spectrum has been well optimized by introducing the Gaussian apodization function to suppress the sidelobes without any wavelength shift on the RPWs. Then, a high-channel-count comb filter based on MPS is proposed by cascading two or more SFBGs with different Bragg periods but with the same RPWs. Noticeably, the RPWs of the new structured SFBG can also be accurately calculated through the expression. Furthermore, the number of spectral channels can be controlled by choosing gratings with specified difference Bragg periods.

  8. Librarians as Interior Designers: The Icing on the Cake (Profile of a Community College LRC: Palomar College).

    Science.gov (United States)

    Arnsan, Dan

    1985-01-01

    Describes how staff at Palomar College Library participated in planning the interior of the library building in areas such as designing the floor plans, writing furniture specifications, choosing colors, and making structural changes in the facility. Offers advice for other librarians participating in building projects. (DMM)

  9. Time-oriented experimental design method to optimize hydrophilic matrix formulations with gelation kinetics and drug release profiles.

    Science.gov (United States)

    Shin, Sangmun; Choi, Du Hyung; Truong, Nguyen Khoa Viet; Kim, Nam Ah; Chu, Kyung Rok; Jeong, Seong Hoon

    2011-04-04

    A new experimental design methodology was developed by integrating the response surface methodology and the time series modeling. The major purposes were to identify significant factors in determining swelling and release rate from matrix tablets and their relative factor levels for optimizing the experimental responses. Properties of tablet swelling and drug release were assessed with ten factors and two default factors, a hydrophilic model drug (terazosin) and magnesium stearate, and compared with target values. The selected input control factors were arranged in a mixture simplex lattice design with 21 experimental runs. The obtained optimal settings for gelation were PEO, LH-11, Syloid, and Pharmacoat with weight ratios of 215.33 (88.50%), 5.68 (2.33%), 19.27 (7.92%), and 3.04 (1.25%), respectively. The optimal settings for drug release were PEO and citric acid with weight ratios of 191.99 (78.91%) and 51.32 (21.09%), respectively. Based on the results of matrix swelling and drug release, the optimal solutions, target values, and validation experiment results over time were similar and showed consistent patterns with very small biases. The experimental design methodology could be a very promising experimental design method to obtain maximum information with limited time and resources. It could also be very useful in formulation studies by providing a systematic and reliable screening method to characterize significant factors in the sustained release matrix tablet. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Design implications of incorporating employee profiles and workplace activity levels in travel demand management led parking demand assessments

    CSIR Research Space (South Africa)

    Letebele, MO

    2008-07-01

    Full Text Available spaces when the demand for parking is ever increasing. A more fundamental question, however, is how to better understand travel behaviour to enable the design of sustainable transport services, of which parking form part, in line with policy instruments...

  11. Design and experiment of profiling sliding-knife opener%仿形滑刀式开沟器设计与试验

    Institute of Scientific and Technical Information of China (English)

    贾洪雷; 郑嘉鑫; 袁洪方; 郭明卓; 王文君; 姜鑫铭

    2017-01-01

    To improve the seedbed quality and enhance the even distribution of soybean seeds and the consistency of deep seeding in the field, and targeting the double-row high-yield planting techniques on soybean ridges, we manufactured the profiling sliding-knife openers that could dig out V-shaped seed furrows and function as single profiling based on a self-invented double-V shape opener. This new opener can build favorable seedbeds, thereby reducing variation coefficient of qualified grain space and variation coefficient of deep seeding and improving seeding quality. The profiling sliding-knife opener mainly functions to dig out V-shaped seed furrows, improve opener passing rate by holding blades, and guarantee the consistency of furrowing depths and the even distribution of seeds. The profiling sliding-knife opener is composed of connecting bar, soil-compressing profiling wheels, profiling device, squeezing knife, and sliding knife. Interaction mechanism between squeezing knife assembly and soil as well as force condition was illustrated, sliding-knife blade force and curve were analyzed, and structure of profiling compacting wheels and force condition were elaborated. Through soil-bin trials, a three-level four-variable central composite rotatable design was applied by Design Expert software. Based on the force analysis and the actual operating condition of machine, the furrowing angle, machine forward velocity, furrowing depth and pressure were selected as influence factors. And the test index was the quantity of backfill. Experiment data obtained were assessed by the analysis of variance (ANOVA) and the quadratic regression model was set up for optimization with response surface methodology. Through the lack of fit test of the regression model, the P value of lack of fit was 0.4895, which was larger than 0.05. The determination coefficient and adjusted determination coefficient were close to 1, which indicated that the regression equation was precise and effective

  12. Analysis And Simulation Of Low Profile Planar Inverted - F Antenna Design For WLAN Operation In Portable Devices

    Directory of Open Access Journals (Sweden)

    Zaw Htet Lwin

    2015-08-01

    Full Text Available This paper presents a compact planar invertedF antenna PIFA design for WLAN operation in portable devices. The proposed design has size of 8 x 21 mm and provides peak directive gain of 5.78dBi with the peak return loss of -33.89dB and input impedance of 50.28amp8486. It covers a 10dB return loss bandwidth of 410MHz 2.37GHz 2.789GHz. Its VSWR varies from 1.96 to 1.93 within the antenna return loss bandwidth. As the dimension of the proposed antenna is very small the antenna is promising to be embedded within the different portable devices employing WiFi applications. This paper includes the return loss as a function of frequency with varying the different parameters VSWR input resistance radiation pattern and current distribution of the proposed antenna.

  13. Optimization of lipid profile and hardness of low-fat mortadella following a sequential strategy of experimental design.

    Science.gov (United States)

    Saldaña, Erick; Siche, Raúl; da Silva Pinto, Jair Sebastião; de Almeida, Marcio Aurélio; Selani, Miriam Mabel; Rios-Mera, Juan; Contreras-Castillo, Carmen J

    2018-02-01

    This study aims to optimize simultaneously the lipid profile and instrumental hardness of low-fat mortadella. For lipid mixture optimization, the overlapping of surface boundaries was used to select the quantities of canola, olive, and fish oils, in order to maximize PUFAs, specifically the long-chain n-3 fatty acids (eicosapentaenoic-EPA, docosahexaenoic acids-DHA) using the minimum content of fish oil. Increased quantities of canola oil were associated with higher PUFA/SFA ratios. The presence of fish oil, even in small amounts, was effective in improving the nutritional quality of the mixture, showing lower n-6/n-3 ratios and significant levels of EPA and DHA. Thus, the optimal lipid mixture comprised of 20, 30 and 50% fish, olive and canola oils, respectively, which present PUFA/SFA (2.28) and n-6/n-3 (2.30) ratios within the recommendations of a healthy diet. Once the lipid mixture was optimized, components of the pre-emulsion used as fat replacer in the mortadella, such as lipid mixture (LM), sodium alginate (SA), and milk protein concentrate (PC), were studied to optimize hardness and springiness to target ranges of 13-16 N and 0.86-0.87, respectively. Results showed that springiness was not significantly affected by these variables. However, as the concentration of the three components increased, hardness decreased. Through the desirability function, the optimal proportions were 30% LM, 0.5% SA, and 0.5% PC. This study showed that the pre-emulsion decreases hardness of mortadella. In addition, response surface methodology was efficient to model lipid mixture and hardness, resulting in a product with improved texture and lipid quality.

  14. Stretched membrane heliostats: design and structural analysis of reflectance module and support of a heliostats of 9 m. diaform and 60 m''3 of reflectance surface; Diseno y analisis estructural del modulo reflectante y estructura soporte de un heliostato de 9 m. de diametro y 60 m2 de superficie reflectante

    Energy Technology Data Exchange (ETDEWEB)

    Figarola Torres, J M

    1993-07-01

    After having designed and built at CIEMAT a first prototype of a Btretched membrane heliostats of 3 m. diameter, the design and the structural analysis of the different components included in the reflectance module and support of another heliostats, this one of 9 m. diameter and 60 m2. of reflectance surface, are shown In this report. This last heliostats will be mounted on a pedestal and its driving device at the Solar Platform of Almeria. In order to optimize design and performance, the structural analysis of its basic components has been analyzed with the finite elements program ANSYS. The following elements have been subject to analysis: the membrane and their ring supports, stretching system and the structural support. A similar scheme to the one applied to the previous prototype has been used on the focus control system. That includes a linear transducer, a variable frequency and a fan. Finally it has to be pointed out that substantial improvements have been achieved with respect to the first prototype concerning design and cost. (Author) 5 refs.

  15. Stretched membrane heliostats: design and structural analysis of reflectance module and support of a heliostats of 9 m. diaform and 60 m''3 of reflectance surface; Diseno y analisis estructural del modulo reflectante y estructura soporte de un heliostato de 9 m. de diametro y 60 m2 de superficie reflectante

    Energy Technology Data Exchange (ETDEWEB)

    Figarola Torres, J. M.

    1993-07-01

    After having designed and built at CIEMAT a first prototype of a Btretched membrane heliostats of 3 m. diameter, the design and the structural analysis of the different components included in the reflectance module and support of another heliostats, this one of 9 m. diameter and 60 m2. of reflectance surface, are shown In this report. This last heliostats will be mounted on a pedestal and its driving device at the Solar Platform of Almeria. In order to optimize design and performance, the structural analysis of its basic components has been analyzed with the finite elements program ANSYS. The following elements have been subject to analysis: the membrane and their ring supports, stretching system and the structural support. A similar scheme to the one applied to the previous prototype has been used on the focus control system. That includes a linear transducer, a variable frequency and a fan. Finally it has to be pointed out that substantial improvements have been achieved with respect to the first prototype concerning design and cost. (Author) 5 refs.

  16. Use of a reflective semiconductor optical amplifier and dual-ring architecture design to produce a stable multi-wavelength fiber laser

    International Nuclear Information System (INIS)

    Yeh, Chien-Hung; Chow, Chi-Wai; Lu, Shao-Sheng

    2014-01-01

    In this work, we propose and demonstrate a multi-wavelength laser source produced by utilizing a C-band reflective semiconductor optical amplifier (RSOA) with a dual-ring fiber cavity. Here, the laser cavity consists of an RSOA, a 1 × 2 optical coupler, a 2 × 2 optical coupler and a polarization controller. As a result, thirteen to eighteen wavelengths around the L band could be generated simultaneously when the bias current of the C-band RSOA was driven at 30–70 mA. In addition, the output stabilities of the power and wavelength are also discussed. (paper)

  17. Use of a reflective semiconductor optical amplifier and dual-ring architecture design to produce a stable multi-wavelength fiber laser

    Science.gov (United States)

    Yeh, Chien-Hung; Chow, Chi-Wai; Lu, Shao-Sheng

    2014-05-01

    In this work, we propose and demonstrate a multi-wavelength laser source produced by utilizing a C-band reflective semiconductor optical amplifier (RSOA) with a dual-ring fiber cavity. Here, the laser cavity consists of an RSOA, a 1 × 2 optical coupler, a 2 × 2 optical coupler and a polarization controller. As a result, thirteen to eighteen wavelengths around the L band could be generated simultaneously when the bias current of the C-band RSOA was driven at 30-70 mA. In addition, the output stabilities of the power and wavelength are also discussed.

  18. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  19. Design and Optimization of Filament Wound Composite Pressure Vessels

    NARCIS (Netherlands)

    Zu, L.

    2012-01-01

    One of the most important issues for the design of filament-wound pressure vessels reflects on the determination of the most efficient meridian profiles and related fiber architectures, leading to optimal structural performance. To better understand the design and optimization of filament-wound

  20. Design, Construction, and Initial Test of High Spatial Resolution Thermometry Arrays for Detection of Surface Temperature Profiles on SRF Cavities in Super Fluid Helium

    Energy Technology Data Exchange (ETDEWEB)

    Ari Palczewski, Rongli Geng, Grigory Eremeev

    2011-07-01

    We designed and built two high resolution (0.6-0.55mm special resolution [1.1-1.2mm separation]) thermometry arrays prototypes out of the Allen Bradley 90-120 ohm 1/8 watt resistor to measure surface temperature profiles on SRF cavities. One array was designed to be physically flexible and conform to any location on a SRF cavity; the other was modeled after the common G-10/stycast 2850 thermometer and designed to fit on the equator of an ILC (Tesla 1.3GHz) SRF cavity. We will discuss the advantages and disadvantages of each array and their construction. In addition we will present a case study of the arrays performance on a real SRF cavity TB9NR001. TB9NR001 presented a unique opportunity to test the performance of each array as it contained a dual (4mm separation) cat eye defect which conventional methods such as OST (Oscillating Superleak second-sound Transducers) and full coverage thermometry mapping were unable to distinguish between. We will discuss the new arrays ability to distinguish between the two defects and their preheating performance.

  1. The HIV Risk Profiles of Latino Sexual Minorities and Transgender Persons Who Use Websites or Apps Designed for Social and Sexual Networking.

    Science.gov (United States)

    Sun, Christina J; Reboussin, Beth; Mann, Lilli; Garcia, Manuel; Rhodes, Scott D

    2016-02-01

    The use of websites and GPS-based mobile applications ("apps") designed for social and sexual networking has been associated with increased HIV risk; however, little is known about Latino sexual minorities' and transgender persons' use of these websites and apps and the risk profiles of those who use them compared with those who do not. Data from 167 participants who completed the baseline survey of a community-level HIV prevention intervention, which harnesses the social networks of Latino sexual minorities and transgender persons, were analyzed. One quarter of participants (28.74%, n = 48) reported using websites or apps designed for social and sexual networking, and 119 (71.26%) reported not using websites or apps designed for social and sexual networking. Those who used websites or apps were younger and reported more male sex partners, a sexually transmitted disease diagnosis, and illicit drug use other than marijuana. HIV prevention interventions for those who use websites or apps should consider addressing these risks for HIV. © 2015 Society for Public Health Education.

  2. Cell design and image analysis for in situ Raman mapping of inhomogeneous state-of-charge profiles in lithium-ion batteries

    Science.gov (United States)

    Fang, Shuyu; Yan, Min; Hamers, Robert J.

    2017-06-01

    The study of inhomogeneous battery failure processes requires proper tools with high spatial resolving power. Here we describe a simple way to adapt industry-standard coin cells to enable in situ Raman mapping of lithium-ion battery materials. We describe the important cell design parameters and validate that the design achieves a uniform potential distribution within the region probed by Raman. We further validate that the cell yields electrical performance characteristics equivalent to a standard, non-modified coin cell. Using this cell, we probe the local charging profiles of LiNi0.5Mn0.3Co0.2O2 ("NMC") particles during cycling and demonstrate the ability to achieve spatial maps of the Raman spectra. In order to reduce the effects of local topography, we further analyze these data by numerically extracting the local frequency of the A1g vibrational mode, which is sensitive to the local extent of lithiation, and producing spatial maps of the local frequency of the A1g mode. This work demonstrates a way to collect and analyze high quality in situ spectra with an easy-to-implement cell design that can be applied to a wide range of electrode materials.

  3. Organizing a Collaborative Development of Technological Design Requirements Using a Constructive Dialogue on Value Profiles: A Case in Automated Vehicle Development.

    Science.gov (United States)

    Flipse, Steven M; Puylaert, Steven

    2018-02-01

    Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of 'outsiders' in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which we first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field.

  4. Challenging Narcissus, or Reflecting on Reflecting.

    Science.gov (United States)

    Achilles, C. M.

    The concept of reflective practice and teaching people to be reflective practitioners is examined. The document begins with a look at professional knowledge according to three prominent professionals in the educational administration field: Schon, Schein, and Achilles. "Reflective" strategies that could be incorporated into courses and…

  5. Cultivating Reflective Practitioners in Technology Preparation: Constructing TPACK through Reflection

    Directory of Open Access Journals (Sweden)

    Liangyue Lu

    2013-12-01

    Full Text Available Teaching is a complex profession, which is further complicated by the integration of technology into classrooms. Reflection can help teachers unpack the complexity in their practice. Reflection can be an effective instructional strategy in helping preservice teachers develop technological pedagogical content knowledge (TPACK, the complex and dynamic knowledge necessary for effective technology integration into instruction. In this study, reflective activities were integrated into a Learning By Design (LBD environment, which was created to help preservice teachers develop TPACK. This paper investigated the participants’ TPACK development and examined how reflection helped them construct TPACK. Through content analysis of the participants’ reflective journals, the researcher found that the preservice teachers developed initial TPACK awareness. However, their reflection in technology knowledge and the content aspects of TPACK were limited and superficial. Interviews with the participants showed reflection helped the preservice teachers remember what they learned by describing and elaborating on their in-class experiences, pushed them to think about how to apply what they learned in their future classrooms, and helped them become more reflective and open-minded about using technology in classrooms. Finally, the researcher discussed this study’s implications for teacher educators and researchers.

  6. The Framework of a Generic DProf Programme--A Reflection on Its Design, the Relational Dimension for Candidates and Advisers and the Potential for Knowledge Co-Creation

    Science.gov (United States)

    Fillery-Travis, Annette Jayne

    2014-01-01

    This paper critically engages with the pedagogical design of a generic professional doctorate programme as a framework for creation of actionable knowledge within the practice of both adviser and candidate. Within this exploration the relational dimensions of the adviser-candidate interaction are identified and their potential impact partially…

  7. Crustal investigations of the earthquake-prone Vrancea region in Romania - Part 2: Novel deep seismic reflection experiment in the southeastern Carpathian belt and its foreland basin - survey target, design, and first results

    Science.gov (United States)

    Mocanu, V. I.; Stephenson, R. A.; Diaconescu, C. C.; Knapp, J. H.; Matenco, L.; Dinu, C.; Harder, S.; Prodehl, C.; Hauser, F.; Raileanu, V.; Cloetingh, S. A.; Leever, K.

    2001-12-01

    Seismic studies of the outer Carpathian Orogen and its foreland (Focsani Basin) in the vicinity of the Vrancea Zone and Danube Delta (Romania) forms one component of a new multidisciplinary initiative of ISES (Netherlands Centre for Integrated Solid Earth Sciences) called DACIA PLAN ("Danube and Carpathian Integrated Action on Processes in the Lithosphere and Neotectonics"). The study area, at the margin of the European craton, constitutes one of the most active seismic zones in Europe, yet has remained a geological and geodynamic enigma within the Alpine-Himalayan orogenic system. Intermediate depth (50-220 km) mantle earthquakes of significant magnitude occur in a geographically restricted area in the south-east Carpathians bend. The adjacent, foreland Focsani Basin appears to exhibit recent extensional deformation in what is otherwise understood to be a zone of convergence. The deep seismic reflection component of DACIA PLAN comprises a ~140-km near-vertical profile across the Vrancea Zone and Focsani Basin. Data acquisition took place in August-September 2001, as part of the integrated refraction/reflection seismic field programme "Vrancea-2001" co-ordinated at Karlsruhe University (cf. Abstract, Part 1), utilising 640 independently deployed recorders provided by UTEP and IRIS/PASSCAL ("Texans"). Station spacing was every 100-m with shots every 1-km. These data are to be integrated with industry seismic as well as planned new medium-high resolution seismic reflection profiling across key neotectonically active structures in the Focsani Basin. Particular goals of DACIA PLAN include: (1) the architecture of the Tertiary/Quaternary basins developed within and adjacent to this zone, including the foreland Focsani Basin; (2) the presence and geometry of structural detachment(s) in relation with foreland basin development, including constraints for balanced cross-sections and geodynamic modelling of basin origin and evolution; (3) the relationship between crustal

  8. Development of a method for the determination of caffeine anhydrate in various designed intact tablets [correction of tables] by near-infrared spectroscopy: a comparison between reflectance and transmittance technique.

    Science.gov (United States)

    Ito, Masatomo; Suzuki, Tatsuya; Yada, Shuichi; Kusai, Akira; Nakagami, Hiroaki; Yonemochi, Etsuo; Terada, Katsuhide

    2008-08-05

    Using near-infrared (NIR) spectroscopy, an assay method which is not affected by such elements of tablet design as thickness, shape, embossing and scored line was developed. Tablets containing caffeine anhydrate were prepared by direct compression at various compression force levels using different shaped punches. NIR spectra were obtained from these intact tablets using the reflectance and transmittance techniques. A reference assay was performed by high-performance liquid chromatography (HPLC). Calibration models were generated by the partial least-squares (PLS) regression. Changes in the tablet thickness, shape, embossing and scored line caused NIR spectral changes in different ways, depending on the technique used. As a result, noticeable errors in drug content prediction occurred using calibration models generated according to the conventional method. On the other hand, when the various tablet design elements which caused the NIR spectral changes were included in the model, the prediction of the drug content in the tablets was scarcely affected by those elements when using either of the techniques. A comparison of these techniques resulted in higher predictability under the tablet design variations using the transmittance technique with preferable linearity and accuracy. This is probably attributed to the transmittance spectra which sensitively reflect the differences in tablet thickness or shape as a result of obtaining information inside the tablets.

  9. AntiReflection Coating D

    International Nuclear Information System (INIS)

    AIKEN, DANIEL J.

    1999-01-01

    Analytical expressions used to optimize AR coatings for single junction solar cells are extended for use in monolithic, series interconnected multi-junction solar cell AR coating design. The result is an analytical expression which relates the solar cell performance (through J(sub sc)) directly to the AR coating design through the device reflectance. It is also illustrated how AR coating design be used to provide an additional degree of freedom for current matching multi-junction devices

  10. Enabling Critical Reflection on Research Supervisory Practice

    Science.gov (United States)

    Pearson, Margot; Kayrooz, Carole

    2004-01-01

    This paper describes the development of an instrument--The Reflective Supervisor Questionnaire (RSQ). The RSQ maps the domain of research supervisory practice as a facilitative process involving educational tasks and activities. It is designed to assist research supervisors explore, by means of self-reflection and reflection on feedback from…

  11. Acoustic reflections in the water column of Krishna-Godavari offshore basin, Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Sinha, S.K.; Dewangan, P.; Sain, K.

    reflection seismic data. Remarkable similarities between the reflection seismic and the salinity profile in the upper thermocline suggest the importance of salinity variations on the water column reflection. Furthermore, impedance inversion...

  12. Total reflection X-ray fluorescence measurements of S and P in proteins using a vacuum chamber specially designed for low Z elements

    International Nuclear Information System (INIS)

    Rauwolf, M.; Vanhoof, C.; Tirez, K.; Maes, E.; Ingerle, D.; Wobrauschek, P.; Streli, C.

    2014-01-01

    As the ratio of phosphorus and sulfur in proteins allows the determination of the phosphorylation degree in proteins, the absolute determination of phosphorus and sulfur in organic samples is of growing interest. While it takes some effort to quantify phosphorus and sulfur with inductively coupled quadrupole plasma mass spectrometry (ICP-QMS), total reflection X-ray fluorescence analysis (TXRF) allows easy quantification. In the presented work, the low Z TXRF spectrometer at the Atominstitut was used to analyze phosphorus and sulfur in proteins. Although the preparation of the protein samples proved to be more difficult than originally expected, it could be shown that TXRF is well suited for the determination of P and S in proteins. The obtained lower limits of detection (LLD) for P and S in proteins were extrapolated for 1000s and were 34 pg and 19 pg, respectively. The importance of height scans for each sample to exclude heterogeneities was demonstrated. - Highlights: • Low Z TXRF spectrometry was used to analyze phosphorus and sulfur in proteins. • TXRF is well suited for the determination of P and S in proteins. • Good detection limits for P (34 pg) and S (19 pg) were achieved. • Due to the detection limits, we propose that TXRF is a suitable method to analyze protein fractions

  13. Critical reflection activation analysis - a new near-surface probe

    International Nuclear Information System (INIS)

    Gunn, J.M.F.; Trohidou, K.N.

    1988-09-01

    We propose a new surface analytic technique, Critical Reflection Activation Analysis (CRAA). This technique allows accurate depth profiling of impurities ≤ 100A beneath a surface. The depth profile of the impurity is simply related to the induced activity as a function of the angle of reflection. We argue that the technique is practical and estimate its accuracy. (author)

  14. Broader utilization of programmable automation equipment in French nuclear power plants: Reflections on the choices made by Electricite de France and French designers

    International Nuclear Information System (INIS)

    Baudry, Y.; Varaldi, G.

    1983-01-01

    More than 1000 microprocessors and more than 10,000 data memories in each of the twenty or so 1300 MW units in the French nuclear programme: that was the decision taken by Electricite de France (EDF) in conjunction with the designers in 1974, with the intention of introducing programmable automata on a wide scale in French nuclear power plants. This programme was carried out with the assistance of advanced research services such as the universities, the Commissariat a l'energie atomique (CEA), EDF's design and research service and the designers, most of whom were already EDF suppliers for the 900 MW range. Having used computers for linking sequences (themselves carried out with electromagnetic technology) for its latest natural-uranium gas-cooled graphite-moderated power plants, EDF decided to call a temporary halt, in the case of its 900 MW light-water range, to the use of digital techniques for the control and automation of power plants although it continued to employ such techniques widely in data processing. Thus, the widespread introduction of programmable automata, which was decided upon in 1974/75 at a time when no equivalent existed at the international level, led EDF and French designers to undertake a major development effort in order to meet the requirements - particularly safety and reliability requirements - for such automata to be incorporated into the nuclear field. How does this choice fit in with the logical evolution of the digitalization of French nuclear power plants. What problems has it caused for EDF and French industry. How have these problems been tackled. How have they been overcome. These are the questions dealt with in this paper. (author)

  15. Validation of a Computational Model for the SLS Core Stage Oxygen Tank Diffuser Concept and the Low Profile Diffuser - An Advanced Development Design for the SLS

    Science.gov (United States)

    Brodnick, Jacob; Richardson, Brian; Ramachandran, Narayanan

    2015-01-01

    The Low Profile Diffuser (LPD) project originated as an award from the Marshall Space Flight Center (MSFC) Advanced Development (ADO) office to the Main Propulsion Systems Branch (ER22). The task was created to develop and test an LPD concept that could produce comparable performance to a larger, traditionally designed, ullage gas diffuser while occupying a smaller volume envelope. Historically, ullage gas diffusers have been large, bulky devices that occupy a significant portion of the propellant tank, decreasing the tank volume available for propellant. Ullage pressurization of spacecraft propellant tanks is required to prevent boil-off of cryogenic propellants and to provide a positive pressure for propellant extraction. To achieve this, ullage gas diffusers must slow hot, high-pressure gas entering a propellant tank from supersonic speeds to only a few meters per second. Decreasing the incoming gas velocity is typically accomplished through expansion to larger areas within the diffuser which has traditionally led to large diffuser lengths. The Fluid Dynamics Branch (ER42) developed and applied advanced Computational Fluid Dynamics (CFD) analysis methods in order to mature the LPD design from and initial concept to an optimized test prototype and to provide extremely accurate pre-test predictions of diffuser performance. Additionally, the diffuser concept for the Core Stage of the Space Launch System (SLS) was analyzed in a short amount of time to guide test data collection efforts of the qualification of the device. CFD analysis of the SLS diffuser design provided new insights into the functioning of the device and was qualitatively validated against hot wire anemometry of the exterior flow field. Rigorous data analysis of the measurements was performed on static and dynamic pressure data, data from two microphones, accelerometers and hot wire anemometry with automated traverse. Feasibility of the LPD concept and validation of the computational model were

  16. Beyond the Margins: Reflective Writing and Development of Reflective Capacity in Medical Education

    Science.gov (United States)

    Reis, Shmuel P.

    2010-01-01

    Reflective capacity has been described as an essential characteristic of professionally competent clinical practice, core to ACGME competencies. Reflection has been recently linked to promoting effective use of feedback in medical education and associated with improved diagnostic accuracy, suggesting promising outcomes. There has been a proliferation of reflective writing pedagogy within medical education to foster development of reflective capacity, extend empathy with deepened understanding of patients’ experience of illness, and promote practitioner well-being. At Alpert Med, “interactive” reflective writing with guided individualized feedback from interdisciplinary faculty to students’ reflective writing has been implemented in a Doctoring course and Family Medicine clerkship as an educational method to achieve these aims. Such initiatives, however, raise fundamental questions of reflection definition, program design, efficacy of methods, and outcomes assessment. Within this article, we consider opportunities and challenges associated with implementation of reflective writing curricula for promotion of reflective capacity within medical education. We reflect upon reflection. PMID:20407840

  17. Information content in reflected signals during GPS Radio Occultation observations

    Science.gov (United States)

    Aparicio, Josep M.; Cardellach, Estel; Rodríguez, Hilda

    2018-04-01

    The possibility of extracting useful information about the state of the lower troposphere from the surface reflections that are often detected during GPS radio occultations (GPSRO) is explored. The clarity of the reflection is quantified, and can be related to properties of the surface and the low troposphere. The reflected signal is often clear enough to show good phase coherence, and can be tracked and processed as an extension of direct non-reflected GPSRO atmospheric profiles. A profile of bending angle vs. impact parameter can be obtained for these reflected signals, characterized by impact parameters that are below the apparent horizon, and that is a continuation at low altitude of the standard non-reflected bending angle profile. If there were no reflection, these would correspond to tangent altitudes below the local surface, and in particular below the local mean sea level. A forward operator is presented, for the evaluation of the bending angle of reflected GPSRO signals, given atmospheric properties as described by a numerical weather prediction system. The operator is an extension, at lower impact parameters, of standard bending angle operators, and reproduces both the direct and reflected sections of the measured profile. It can be applied to the assimilation of the reflected section of the profile as supplementary data to the direct section. Although the principle is also applicable over land, this paper is focused on ocean cases, where the topographic height of the reflecting surface, the sea level, is better known a priori.

  18. The implementation of inclusive education in South Africa: Reflections arising from a workshop for teachers and therapists to introduce Universal Design for Learning

    Directory of Open Access Journals (Sweden)

    Elizabeth M. Dalton

    2012-11-01

    Full Text Available South Africa has adopted an inclusive education policy in order to address barriers to learning in the education system. However, the implementation of this policy is hampered by the lack of teachers’ skills and knowledge in differentiating the curriculum to address a wide range of learning needs. In this paper we provided a background to inclusive education policy in South Africa and a brief exposition of an instructional design approach, Universal Design for Learning (UDL that addresses a wide range of learning needs in a single classroom. We reported on a workshop conducted with teachers and therapists in South Africa as a first attempt to introduce UDL in this context. Knowledge of UDL was judged to be appropriate and useful by the course participants in the South African context as a strategy for curriculum differentiation in inclusive classrooms. Furthermore, knowledge of the UDL framework facilitates dialogue between teachers and therapists and provides a relatively simple and comprehensive approach for curriculum differentiation. We therefore conclude that there is potential for this approach that can be expanded through further teacher training.

  19. The implementation of inclusive education in South Africa: Reflections arising from a workshop for teachers and therapists to introduce Universal Design for Learning.

    Science.gov (United States)

    Dalton, Elizabeth M; Mckenzie, Judith Anne; Kahonde, Callista

    2012-01-01

    South Africa has adopted an inclusive education policy in order to address barriers to learning in the education system. However, the implementation of this policy is hampered by the lack of teachers' skills and knowledge in differentiating the curriculum to address a wide range of learning needs. In this paper we provided a background to inclusive education policy in South Africa and a brief exposition of an instructional design approach, Universal Design for Learning (UDL) that addresses a wide range of learning needs in a single classroom. We reported on a workshop conducted with teachers and therapists in South Africa as a first attempt to introduce UDL in this context. Knowledge of UDL was judged to be appropriate and useful by the course participants in the South African context as a strategy for curriculum differentiation in inclusive classrooms. Furthermore, knowledge of the UDL framework facilitates dialogue between teachers and therapists and provides a relatively simple and comprehensive approach for curriculum differentiation. We therefore conclude that there is potential for this approach that can be expanded through further teacher training.

  20. Monolithically integrated 8-channel WDM reflective modulator

    NARCIS (Netherlands)

    Stopinski, S.T.; Malinowski, M.; Piramidowicz, R.; Smit, M.K.; Leijtens, X.J.M.

    2013-01-01

    In this work the design and characterization of a monolithically integrated photonic circuit acting as a reflective modulator for eight WDM channels is presented. The chip was designed and fabricated in a generic integration technology

  1. The reflection on the practice of workspace design: from conception to execution of control center; A reflexao sobre a pratica de projetos de espacos de trabalho: da concepcao a execucao de um centro de controle

    Energy Technology Data Exchange (ETDEWEB)

    Conceicao, Carolina S.; Duarte, Francisco J.C.M. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Engenharia de Producao; Maia, Nora C. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Lannes Junior, Ayr [TRANSPETRO, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The objective of this paper is to present and distinguish the contribution of ergonomics in control rooms design. The methodology that was utilized in the project analysis of a recently built control center, reflection on practice, allows to evidence the characteristics of the ergonomics approach and of the project management that have strongly affect the final result. On the basis of this reflection, the lessons learned during the various stages of the project, from the preliminary studies to the work execution, are presented, with special emphasis on: build up of requirements and layout characteristics; management of different logics, integrating the various actors - users and designers - involved and leveling information among them throughout the whole process; organization of users participation and simulation of working conditions; specification of furniture, linings and equipment, with implementation of new technologies; attendance to the work execution site, due to the existing recreations in that stage as well as the impact of the changes on the control room future activity; and timing consideration for analyzing reference situations at the beginning of the project, and for social construction with the actors during project development. (author)

  2. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    Design - proces & metode iBog®  er enestående i sit fokus på afmystificering og operationalisering af designprocessens flygtige og komplekse karakter. Udgivelsen går bag om designerens daglige arbejde og giver et indblik i den kreative skabelsesproces, som designeren er en del af. Udover et bredt...... indblik i designerens arbejdsmetoder og designparametre giver Design - proces & metode en række eksempler fra anerkendte designvirksomheder, der gør det muligt at komme helt tæt på designerens virkelighed....

  3. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  4. Assessing Reflection: Understanding Skill Development through Reflective Learning Journals

    Science.gov (United States)

    Cathro, Virginia; O'Kane, Paula; Gilbertson, Deb

    2017-01-01

    Purpose: The purpose of this paper is to suggest ways in which business educators can interact successfully with reflective learning journals (RLJs). Specifically, the research was interested in how students used RLJs and how educators assessed these RLJs. Design/methodology/approach: In total, 31 RLJs, submitted as part of an international…

  5. Physico-chemical properties and sensory profile of durum wheat Dittaino PDO (Protected Designation of Origin) bread and quality of re-milled semolina used for its production.

    Science.gov (United States)

    Giannone, Virgilio; Giarnetti, Mariagrazia; Spina, Alfio; Todaro, Aldo; Pecorino, Biagio; Summo, Carmine; Caponio, Francesco; Paradiso, Vito Michele; Pasqualone, Antonella

    2018-02-15

    To help future quality checks, we characterized the physico-chemical and sensory properties of Dittaino bread, a sourdough-based durum wheat bread recently awarded with Protected Designation of Origin mark, along with the quality features of re-milled semolina used for its production. Semolina was checked for Falling Number (533-644s), protein content (12.0-12.3g/100gd.m.), gluten content (9.7-10.5g/100gd.m.), yellow index (18.0-21.0), water absorption (59.3-62.3g/100g), farinograph dough stability (171-327s), softening index (46-66B.U.), alveograph W (193×10 -4 -223×10 -4 J) and P/L (2.2-2.7). Accordingly, bread crumb was yellow, moderately hard (16.4-27.1N) and chewy (88.2-109.2N×mm), with low specific volume (2.28-3.03mL/g). Bread aroma profile showed ethanol and acetic acid, followed by hexanol, 3-methyl-1-butanol, 2-phenylethanol, 3-methylbutanal, hexanal, benzaldehyde, and furfural. The sensory features were dominated by a thick brown crust, with marked toasted odor, coupled to yellow and consistent crumb, with coarse grain and well-perceivable sour taste and odor. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Reflections on SLAP

    International Nuclear Information System (INIS)

    Cooke, Roger

    1997-01-01

    The SLAP data bases represent a major step forward in the reliability analysis of passive components. The present reflections are motivated by draft documentation for SLAP and have profited greatly from discussions with the SLAP team. We collect a number of remarks and suggestions: The use of event and failure fields to organize the data seems sensible and feasible, from a data analysis viewpoint. Influence factors, i. e. environmental influences which are affected by plant operations, are clearly important yet very difficult to accommodate in any straightforward data analysis methodology. We would welcome a serious effort to estimate the exposure in the various exposure cells. These estimates would not be based on failure records, but on knowledge of plant design and operations. Quantitative expert judgement might be a viable alternative to a massive review of all plants in the SLAP data base

  7. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  8. Reflective masks for extreme ultraviolet lithography

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Khanh Bao [Univ. of California, Berkeley, CA (United States)

    1994-05-01

    Extreme ultraviolet lithographic masks are made by patterning multilayer reflective coatings with high normal incidence reflectivity. Masks can be patterned by depositing a patterned absorber layer above the coating or by etching the pattern directly into the coating itself. Electromagnetic simulations showed that absorber-overlayer masks have superior imaging characteristics over etched masks (less sensitive to incident angles and pattern profiles). In an EUVL absorber overlayer mask, defects can occur in the mask substrate, reflective coating, and absorber pattern. Electromagnetic simulations showed that substrate defects cause the most severe image degradation. A printability study of substrate defects for absorber overlayer masks showed that printability of 25 nm high substrate defects are comparable to defects in optical lithography. Simulations also indicated that the manner in which the defects are covered by multilayer reflective coatings can affect printability. Coverage profiles that result in large lateral spreading of defect geometries amplify the printability of the defects by increasing their effective sizes. Coverage profiles of Mo/Si coatings deposited above defects were studied by atomic force microscopy and TEM. Results showed that lateral spread of defect geometry is proportional to height. Undercut at defect also increases the lateral spread. Reductions in defect heights were observed for 0.15 μm wide defect lines. A long-term study of Mo/Si coating reflectivity revealed that Mo/Si coatings with Mo as the top layer suffer significant reductions in reflectivity over time due to oxidation.

  9. Karolinske psychodynamic profile (KAPP)

    DEFF Research Database (Denmark)

    Mathiesen, Birgit Bork; Søgaard, Ulf

    2006-01-01

    psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil......psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil...

  10. Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Pettiway, Keon

    2017-01-01

    In this chapter, Ole B. Jensen takes a situational approach to mobilities to examine how ordinary life activities are structured by technology and design. Using “staging mobilities” as a theoretical approach, Jensen considers mobilities as overlapping, actions, interactions and decisions by desig...... by providing ideas about future research for investigating mobilities in situ as a kind of “staging,” which he notes is influenced by the “material turn” in social sciences....... with a brief description of how movement is studied within social sciences after the “mobilities turn” versus the idea of physical movement in transport geography and engineering. He then explains how “mobilities design” was derived from connections between traffic and architecture. Jensen concludes...

  11. Temperature-reflection I

    DEFF Research Database (Denmark)

    McGady, David A.

    2017-01-01

    -temperature path integrals for quantum field theories (QFTs) should be T-reflection invariant. Because multi-particle partition functions are equal to Euclidean path integrals for QFTs, we expect them to be T-reflection invariant. Single-particle partition functions though are often not invariant under T......In this paper, we revisit the claim that many partition functions are invariant under reflecting temperatures to negative values (T-reflection). The goal of this paper is to demarcate which partition functions should be invariant under T-reflection, and why. Our main claim is that finite...... that T-reflection is unrelated to time-reversal. Finally, we study the interplay between T-reflection and perturbation theory in the anharmonic harmonic oscillator in quantum mechanics and in Yang-Mills in four-dimensions. This is the first in a series of papers on temperature-reflections....

  12. Analysis of the effects of five factors relevant to in vitro chondrogenesis of human mesenchymal stem cells using factorial design and high throughput mRNA-profiling.

    Science.gov (United States)

    Jakobsen, Rune B; Østrup, Esben; Zhang, Xiaolan; Mikkelsen, Tarjei S; Brinchmann, Jan E

    2014-01-01

    The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols.

  13. Validation and Application of a Custom-Designed Targeted Next-Generation Sequencing Panel for the Diagnostic Mutational Profiling of Solid Tumors.

    Directory of Open Access Journals (Sweden)

    Guy Froyen

    Full Text Available The inevitable switch from standard molecular methods to next-generation sequencing for the molecular profiling of tumors is challenging for most diagnostic laboratories. However, fixed validation criteria for diagnostic accreditation are not in place because of the great variability in methods and aims. Here, we describe the validation of a custom panel of hotspots in 24 genes for the detection of somatic mutations in non-small cell lung carcinoma, colorectal carcinoma and malignant melanoma starting from FFPE sections, using 14, 36 and 5 cases, respectively. The targeted hotspots were selected for their present or future clinical relevance in solid tumor types. The target regions were enriched with the TruSeq approach starting from limited amounts of DNA. Cost effective sequencing of 12 pooled libraries was done using a micro flow cell on the MiSeq and subsequent data analysis with MiSeqReporter and VariantStudio. The entire workflow was diagnostically validated showing a robust performance with maximal sensitivity and specificity using as thresholds a variant allele frequency >5% and a minimal amplicon coverage of 300. We implemented this method through the analysis of 150 routine diagnostic samples and identified clinically relevant mutations in 16 genes including KRAS (32%, TP53 (32%, BRAF (12%, APC (11%, EGFR (8% and NRAS (5%. Importantly, the highest success rate was obtained when using also the low quality DNA samples. In conclusion, we provide a workflow for the validation of targeted NGS by a custom-designed pan-solid tumor panel in a molecular diagnostic lab and demonstrate its robustness in a clinical setting.

  14. Analysis of the Effects of Five Factors Relevant to In Vitro Chondrogenesis of Human Mesenchymal Stem Cells Using Factorial Design and High Throughput mRNA-Profiling

    Science.gov (United States)

    Jakobsen, Rune B.; Østrup, Esben; Zhang, Xiaolan; Mikkelsen, Tarjei S.; Brinchmann, Jan E.

    2014-01-01

    The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols. PMID:24816923

  15. Analysis of the effects of five factors relevant to in vitro chondrogenesis of human mesenchymal stem cells using factorial design and high throughput mRNA-profiling.

    Directory of Open Access Journals (Sweden)

    Rune B Jakobsen

    Full Text Available The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols.

  16. Design of a microfluidic device with a non-traditional flow profile for on-chip damage to zebrafish sensory cells

    International Nuclear Information System (INIS)

    Kwon, Hyuck-Jin; Xu, Yuhao; Solovitz, Stephen A; Xue, Wei; Xu, Jie; Dimitrov, Alexander G; Coffin, Allison B

    2014-01-01

    Hearing loss affects millions of people worldwide and often results from the death of the sensory hair cells in the inner ear, and exposure to intense noise is one of the leading causes of hair cell damage. Recently, the zebrafish lateral line system has emerged as a powerful in vivo model for real-time studies of hair cell damage and protection. In this research, we designed a microfluidic device for inducing noise damage in hair cells of the zebrafish lateral line. As the first step, a 3D computational fluid dynamics (CFD) simulation was utilized to predict the flow pattern inside the device. An ideal flow pattern for our application should feature higher velocity near the sidewalls to over-stimulate the externally located hair cells, and minimum flow in the middle of the channel to protect the fish from high pressure on the head. Flow induced from ordinary channel geometry with a single inlet/outlet pair would not work because the parabolic velocity profile features the maximum flow speed in the middle of the channel. In order to achieve the desired flow pattern, sidewall inlet/outlet pairs were used to suppress the growth of boundary layers. CFD simulation was used to design parameters such as the dimensions of the microfluidic channel and the angle of the inlets and outlets. It was found that in the case of an empty 2.0 mm wide channel with the inlet/outlet pairs set to 45°, the flow velocity at the side of the channel would be 6.7 times faster than the velocity in the middle, approaching the optimal flow characteristics. In the case of a fish-loaded channel, simulation shows that a 1.0 mm wide channel with a 60° inlet/outlet angle creates the lowest pressure (0.3 Pa) on the fish head while maintaining a reasonably strong shear stress (1.9 Pa) on the lateral line hair cells. (technical note)

  17. Liberating Moral Reflection

    Science.gov (United States)

    Horell, Harold D.

    2013-01-01

    The author argues that if we are to foster life-giving and liberating moral reflection, we must first liberate moral reflection from distortions; specifically, from the distorting effects of moral insensitivity, destructive moral relativism, and confusions resulting from a failure to understand the dynamics of moral reflection. The author proposes…

  18. Reflections on Architecture Design Education: The Integrated ...

    African Journals Online (AJOL)

    AFRREV STECH: An International Journal of Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 1 (2016) >. Log in or Register to get access to full text downloads.

  19. Designing anthropological reflection within an energy company

    DEFF Research Database (Denmark)

    Løgstrup, Louise Buch; Gunn, Wendy; Said Mosleh, Wafa

    2013-01-01

    The move towards a more liberalized energy market and the emergent smart grid technology has forced a Scandinavian energy company to begin rethinking the relation between themselves and private energy end users. Originally a unidirectional relationship, the present and future have potential...

  20. Critical reflection and dialogical learning design

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft; Mathiesen, Kim Haagen; Nedergaard, Mathias Helbo

    2016-01-01

    Distance education and e-learning has been around for some time now. The ubiquitous development of the internet (Sharples, 2007) has however made way for the emergence of new educational formats such as the much talked-about Massive Open Online Courses (MOOCs). Within MOOCs users have access...... to educational literature and tasks at all times, which allow users to fit the course into their own pace, place and Personal Learning Environment (Attwell 2007). Today MOOCs has spread across the globe, and in Denmark we now see institutions such as Aarhus University developing a new course with roots...... in the MOOC format, however without the ‘Massive’ part (Aarhus University, 2016). Over a 5 week period we conducted a netnographic (Kozinet, 2015) mixed methods research of the MOOC Blended Learning Essentials (https://www.futurelearn.com/courses/blended-learning-gettingstarted/2). Contrary to the acclaimed...

  1. Analysis of neutron reflectivity data: maximum entropy, Bayesian spectral analysis and speckle holography

    International Nuclear Information System (INIS)

    Sivia, D.S.; Hamilton, W.A.; Smith, G.S.

    1991-01-01

    The analysis of neutron reflectivity data to obtain nuclear scattering length density profiles is akin to the notorious phaseless Fourier problem, well known in many fields such as crystallography. Current methods of analysis culminate in the refinement of a few parameters of a functional model, and are often preceded by a long and laborious process of trial and error. We start by discussing the use of maximum entropy for obtained 'free-form' solutions of the density profile, as an alternative to the trial and error phase when a functional model is not available. Next we consider a Bayesian spectral analysis approach, which is appropriate for optimising the parameters of a simple (but adequate) type of model when the number of parameters is not known. Finally, we suggest a novel experimental procedure, the analogue of astronomical speckle holography, designed to alleviate the ambiguity problems inherent in traditional reflectivity measurements. (orig.)

  2. Identification of Analytical Factors Affecting Complex Proteomics Profiles Acquired in a Factorial Design Study with Analysis of Variance : Simultaneous Component Analysis

    NARCIS (Netherlands)

    Mitra, V.; Govorukhina, N.; Zwanenburg, G.; Hoefsloot, H.; Westra, I.; Smilde, A.; Reijmers, T.; van der Zee, A.G.J.; Suits, F.; Bischoff, R.; Horvatovich, P.

    2016-01-01

    Complex shotgun proteomics peptide profiles obtained in quantitative differential protein expression studies, such as in biomarker discovery, may be affected by multiple experimental factors. These preanalytical factors may affect the measured protein abundances which in turn influence the outcome

  3. Controlling magnetic field profiles

    International Nuclear Information System (INIS)

    Freeman, J.R.

    1979-04-01

    A method for designing solenoid magnets with controlled field profiles is discussed. The method, originated by D.B. Montgomery, minimizes both the field errors and the power consumption. An NOS time-sharing computer program for the CDC-6600, entitled MAGCOR, was constructed to provide an interactive magnet design capability. Results obtained during the design of magnets for a radial line electron accelerator are presented. 9 figures

  4. Talking Online: Reflecting on Online Communication Tools

    Science.gov (United States)

    Greener, Susan

    2009-01-01

    Purpose: The purpose of this paper is to reflect on the value and constraints of varied online communication tools from web 2.0 to e-mail in a higher education (HE) teaching and learning context, where these tools are used to support or be the main focus of learning. Design/methodology/approach: A structured reflection is produced with the aid of…

  5. Shave-off depth profiling: Depth profiling with an absolute depth scale

    International Nuclear Information System (INIS)

    Nojima, M.; Maekawa, A.; Yamamoto, T.; Tomiyasu, B.; Sakamoto, T.; Owari, M.; Nihei, Y.

    2006-01-01

    Shave-off depth profiling provides profiling with an absolute depth scale. This method uses a focused ion beam (FIB) micro-machining process to provide the depth profile. We show that the shave-off depth profile of a particle reflected the spherical shape of the sample and signal intensities had no relationship to the depth. Through the introduction of FIB micro-sampling, the shave-off depth profiling of a dynamic random access memory (DRAM) tip was carried out. The shave-off profile agreed with a blue print from the manufacturing process. Finally, shave-off depth profiling is discussed with respect to resolutions and future directions

  6. Self-reflection, gender and science achievement

    Science.gov (United States)

    Shoop, Kathleen A.

    Drawing on socio-cognitive learning theory, this study compared achievement scores of 134 male and female high school biology students randomly assigned to groups which either used self-reflection, used self-reflection and received feedback, or did not self-reflect. Following a pretest, the teacher provided self-reflection strategy instruction to students in the two intervention groups and then subsequently provided in-class self-reflection time for these groups. The posttest concluded the unit; the retention measure was five weeks later. A quasi-experimental 3 x 3 x 2 (time x intervention x gender) factorial repeated-measures control group design was used for this study; a repeated measures ANOVA and several one-way ANOVA's were used to answer the research questions. Results from the repeated-measures ANOVA revealed significant results for Time and Time x Intervention, with the reflection group demonstrating significantly lower gains from pretest to posttest than the other two groups. The ANOVA examining differences between those who reflected and those who reflected and received feedback provided significant results with similar results for the difference between the control group and the reflection group. For teachers and students this study provides several areas of practical significance. Primarily, teachers may find lower student achievement if students regularly self-reflect but do not receive feedback for their reflection.

  7. Media for Reflection

    DEFF Research Database (Denmark)

    Knudsen, Morten

    2016-01-01

    This article develops the concept media for reflection in the interest of conceptualizing the interpretative frames that enable and limit reflection in management and leadership education. The concept ‘media for reflection’ allows us to conceptualize the social and cultural mediation of reflection...... without reducing reflection to an effect of the social structures and cultural norms in which it is embedded. Based on the developed theoretical framework, this article analyses how a renaissance ‘mirror for princes’ and contemporary research-based management education mediate reflection. The content...... of the mediations is analysed as well as the societal and organizational background. Furthermore, the means by which the two media enable and limit reflection in different ways is compared. Finally, the article discusses possible implications of the analysis in terms of management and leadership education....

  8. Calculation of pole profiles for the design of particle accelerators magnets. Equivalent current and conformal representation methods; Calcul de profils polaires destines a des aimants d'accelerateurs de particules. Methode des courants et methode des transformations conformes

    Energy Technology Data Exchange (ETDEWEB)

    Jaidane, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-04-01

    These two methods allow the determination of the shape of the poles in magnets, for a given field distribution in the air-gap. First method: The principle of the method consists to create the desired law of field by means of current sheets in which one can adjust the density given in a polynomial form. For the right distribution of these currents, the equipotential corresponding to the magnetic potential of the excitation coils is calculated. The pole profile of the H or C magnet identified with this equipotential line will finally take the place of the distribution of the current sheets used in the calculation. Steel permeability is assumed to be infinite and Foucault current effects are neglected in the case of variable fields. Second method: It consists to find a conformal representation that maps the pole profile plane upon the upper half of another plane where the equipotentials are two half straight lines, and where the field problems are easier to solve. Steel permeability is also considered to be infinite and the coils far from the pole faces. This known method has been applied to be compared with the first one. (author) [French] Ces deux methodes consistent a determiner la forme des pieces polaires d'aimants pour une distribution de champ determinee a l'avance dans l'entrefer. Premiere methode: Le principe de la methode consiste a creer la loi de champ desiree par l'intermediaire de nappes de courant dont on peut ajuster la densite exprimee sous une forme polynominale. Pour une distribution convenable de ces courants, on calcule l'equipotentielle correspondant au potentiel magnetique des bobines d'excitation. Le profil polaire d'un aimant en H ou C identifie a l'equipotentielle se substitue finalement a la repartition des nappes de courant utilisee dans la methode de calcul. La permeabilite de l'acier est supposee infinie et les courants de Foucault sont negliges dans le cas des champs variables. Seconde methode: Elle consiste a trouver une transformation

  9. Principles of neutron reflection

    International Nuclear Information System (INIS)

    Felcher, G.P.

    1988-08-01

    Neutron reflection is perhaps the most developed branch of slow neutrons optics, which in itself is a direct consequence of the undulatory nature of the neutron. After reviewing the basic types of interactions (nuclear and magnetic) between neutrons and matter, the formalism is introduced to calculate the reflectivity from a sample composed of stacked flat layers and, inversely, to calculate the stacking from reflectivity measurements. Finally, a brief survey of the applications of neutron reflection is given, both in technology and in fundamental research. 32 refs., 6 figs

  10. Storage array reflection considerations

    International Nuclear Information System (INIS)

    Haire, M.J.; Jordan, W.C.; Taylor, R.G.

    1997-01-01

    The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water-reflected (i.e. surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established

  11. Design for measurement system of Doppler broadening profiles with the coincidence technique using a NaI detector in colinear geometry with the Ge detector

    International Nuclear Information System (INIS)

    Mori, Kazuteru; Uedono, Akira; Tanigawa, Shoichiro; Nakai, Katsuhiko

    1998-01-01

    The measurement system for Doppler broadening profiles with the coincidence technique using a NaI detector in colinear geometry with a Ge detector was developed. The principle of measurement system with the coincidence technique between the NaI detector and the Ge detector was described. Application of the system for the detection of vacancy-type defects introduced by electron irradiation in Czochralski-(Cz) grown Si was shown. Detail in the difference between the Doppler broadening profiles for Cz-Si and Si grown by the floating-zone method was also obtained. (author)

  12. Design for measurement system of Doppler broadening profiles with the coincidence technique using a NaI detector in colinear geometry with the Ge detector

    Energy Technology Data Exchange (ETDEWEB)

    Mori, Kazuteru; Uedono, Akira; Tanigawa, Shoichiro [Tsukuba Univ., Ibaraki (Japan). Inst. of Materials Science; Nakai, Katsuhiko

    1998-08-01

    The measurement system for Doppler broadening profiles with the coincidence technique using a NaI detector in colinear geometry with a Ge detector was developed. The principle of measurement system with the coincidence technique between the NaI detector and the Ge detector was described. Application of the system for the detection of vacancy-type defects introduced by electron irradiation in Czochralski-(Cz) grown Si was shown. Detail in the difference between the Doppler broadening profiles for Cz-Si and Si grown by the floating-zone method was also obtained. (author)

  13. A climatology of visible surface reflectance spectra

    International Nuclear Information System (INIS)

    Zoogman, Peter; Liu, Xiong; Chance, Kelly; Sun, Qingsong; Schaaf, Crystal; Mahr, Tobias; Wagner, Thomas

    2016-01-01

    We present a high spectral resolution climatology of visible surface reflectance as a function of wavelength for use in satellite measurements of ozone and other atmospheric species. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is planned to measure backscattered solar radiation in the 290–740 nm range, including the ultraviolet and visible Chappuis ozone bands. Observation in the weak Chappuis band takes advantage of the relative transparency of the atmosphere in the visible to achieve sensitivity to near-surface ozone. However, due to the weakness of the ozone absorption features this measurement is more sensitive to errors in visible surface reflectance, which is highly variable. We utilize reflectance measurements of individual plant, man-made, and other surface types to calculate the primary modes of variability of visible surface reflectance at a high spectral resolution, comparable to that of TEMPO (0.6 nm). Using the Moderate-resolution Imaging Spectroradiometer (MODIS) Bidirection Reflectance Distribution Function (BRDF)/albedo product and our derived primary modes we construct a high spatial resolution climatology of wavelength-dependent surface reflectance over all viewing scenes and geometries. The Global Ozone Monitoring Experiment–2 (GOME-2) Lambertian Equivalent Reflectance (LER) product provides complementary information over water and snow scenes. Preliminary results using this approach in multispectral ultraviolet+visible ozone retrievals from the GOME-2 instrument show significant improvement to the fitting residuals over vegetated scenes. - Highlights: • Our goals was visible surface reflectance for satellite trace gas measurements. • Captured the range of surface reflectance spectra through EOF analysis. • Used satellite surface reflectance products for each given scene to anchor EOFs. • Generated a climatology of time/geometry dependent surface reflectance spectra. • Demonstrated potential to

  14. ‘Leaving no one behind’: reflections on the design of community-based HIV prevention for migrants in Johannesburg’s inner-city hostels and informal settlements

    Directory of Open Access Journals (Sweden)

    Fiona Scorgie

    2017-07-01

    Full Text Available Abstract Background Unmanaged urban growth in southern and eastern Africa has led to a growth of informal housing in cities, which are home to poor, marginalised populations, and associated with the highest HIV prevalence in urban areas. This article describes and reflects on the authors’ experiences in designing and implementing an HIV intervention originally intended for migrant men living in single-sex hostels of inner-city Johannesburg. It shows how formative research findings were incorporated into project design, substantially shifting the scope of the original project. Methods Formative research activities were undertaken to better understand the demand- and supply-side barriers to delivering HIV prevention activities within this community. These included community mapping, a baseline survey (n = 1458 and client-simulation exercise in local public sector clinics. The intervention was designed and implemented in the study setting over a period of 18 months. Implementation was assessed by way of a process evaluation of selected project components. Results The project scope expanded to include women living in adjacent informal settlements. Concurrent sexual partnerships between these women and male hostel residents were common, and HIV prevalence was higher among women (56% than men (24%. Overwhelmingly, hostel residents were internal migrants from another province, and most felt ‘alienated’ from the rest of the city. While men prioritised the need for jobs, women were more concerned about water, sanitation, housing and poverty alleviation. Most women (70% regarded their community as unsafe (cf. 47% of men. In the final intervention, project objectives were modified and HIV prevention activities were embedded within a broader health and development focus. ‘Community health clubs’ were established to build residents’ capacity to promote health and longer term well-being, and to initiate and sustain change within their

  15. Particle reflection and TFTR neutral beam diagnostics

    International Nuclear Information System (INIS)

    Kamperschroer, J.H.; Grisham, L.R.; Kugel, H.W.; O'Connor, T.E.; Newman, R.A.; Stevenson, T.N.; von Halle, A.; Williams, M.D.

    1992-04-01

    Determination of two critical neutral beam parameters, power and divergence, are affected by the reflection of a fraction of the incident energy from the surface of the measuring calorimeter. On the TFTR Neutral Beam Test Stand, greater than 30% of the incident power directed at the target chamber calorimeter was unaccounted for. Most of this loss is believed due to reflection from the surface of the flat calorimeter, which was struck at a near grazing incidence (12 degrees). Beamline calorimeters, of a ''V''-shape design, while retaining the beam power, also suffer from reflection effects. Reflection, in this latter case, artificially peaks the power toward the apex of the ''V'', complicating the fitting technique, and increasing the power density on axis by 10 to 20%; an effect of import to future beamline designers. Agreement is found between measured and expected divergence values, even with 24% of the incident energy reflected

  16. Dissenting in Reflective Conversations

    DEFF Research Database (Denmark)

    Bjørn, Pernille; Boulus, Nina

    2011-01-01

    Reflective monitoring of research practices is essential. However, we often lack formal training in the practices of doing action research, and descriptions of actual inquiry practice are seldom included in publications. Our aim is to provide a glimpse of self-reflective practices based on our...

  17. Self-Reflection

    DEFF Research Database (Denmark)

    Fausing, Bent

    2016-01-01

    will take a look at the establishing of the modern self and possibilities of self-reflection, too. My examples will be from the so-called dark-selfies and from a new selfie form, which merge the present with the previous progressing into the future. I will discuss the media reflections as loos and/or gain...

  18. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  19. Reflection: A Socratic approach.

    Science.gov (United States)

    Van Seggelen-Damen, Inge C M; Van Hezewijk, René; Helsdingen, Anne S; Wopereis, Iwan G J H

    2017-12-01

    Reflection is a fuzzy concept. In this article we reveal the paradoxes involved in studying the nature of reflection. Whereas some scholars emphasize its discursive nature, we go further and underline its resemblance to the self-biased dialogue Socrates had with the slave in Plato's Meno . The individual and internal nature of the reflection process creates difficulty for studying it validly and reliably. We focus on methodological issues and use Hans Linschoten's view of coupled systems to identify, analyze, and interpret empirical research on reflection. We argue that researchers and research participants can take on roles in several possible system couplings. Depending on who controls the manipulation of the stimulus, who controls the measuring instrument, who interprets the measurement and the response, different types of research questions can be answered. We conclude that reflection may be validly studied by combining different couplings of experimenter, manipulation, stimulus, participant, measurement, and response.

  20. An Access Control Framework for Reflective Middleware

    Institute of Scientific and Technical Information of China (English)

    Gang Huang; Lian-Shan Sun

    2008-01-01

    Reflective middleware opens up the implementation details of middleware platform and applications at runtime for improving the adaptability of middleware-based systems. However, such openness brings new challenges to access control of the middleware-based systems.Some users can access the system via reflective entities, which sometimes cannot be protected by access control mechanisms of traditional middleware. To deliver high adaptability securely, reflective middleware should be equipped with proper access control mechanisms for potential access control holes induced by reflection. One reason of integrating these mechanisms in reflective middleware is that one goal of reflective middleware is to equip applications with reflection capabilities as transparent as possible. This paper studies how to design a reflective J2EE middlewarePKUAS with access control in mind. At first, a computation model of reflective system is built to identify all possible access control points induced by reflection. Then a set of access control mechanisms, including the wrapper of MBeans and a hierarchy of Java class loaders, are equipped for controlling the identified access control points. These mechanisms together with J2EE access control mechanism form the access control framework for PKUAS. The paper evaluates the security and the performance overheads of the framework in quality and quantity.

  1. Terahertz wave reflective sensing and imaging

    Science.gov (United States)

    Zhong, Hua

    Sensing and imaging technologies using terahertz (THz) radiation have found diverse applications as they approach maturity. Since the burgeoning of this technique in the 1990's, many THz sensing and imaging investigations have been designed and conducted in transmission geometry, which provides sufficient phase and amplitude contrast for the study of the spectral properties of targets in the THz domain. Driven by rising expectations that THz technology will be a potential candidate in the next generation of security screening, remote sensing, biomedical imaging and non-destructive testing (NDT), most THz sensing and imaging modalities are being extended to reflection geometry, which offers unique and adaptive solutions, and multi-dimensional information in many real scenarios. This thesis takes an application-focused approach to the advancement of THz wave reflective sensing and imaging systems: The absorption signature of the explosive material hexahydro-1,3,5-trinitro-1,3,5triazine (RDX) is measured at 30 m---the longest standoff distance so far attained by THz time-domain spectroscopy (THz-TDS). The standoff distance sensing ability of THz-TDS is investigated along with discussions specifying the influences of a variety of factors such as propagation distance, water vapor absorption and collection efficiency. Highly directional THz radiation from four-wave mixing in laser-induced air plasmas is first observed and measured, which provides a potential solution for the atmospheric absorption effect in standoff THz sensing. The simulations of the beam profiles also illuminate the underlying physics behind the interaction of the optical beam with the plasma. THz wave reflective spectroscopic focal-plane imaging is realized the first time. Absorption features of some explosives and related compounds (ERCs) and biochemical materials are identified by using adaptive feature extraction method. Good classification results using multiple pattern recognition methods are

  2. Beam profile monitor

    International Nuclear Information System (INIS)

    Krausse, G.J.; Gram, P.A.M.

    1978-05-01

    A system used to monitor secondary beam profiles at the LAMPF Linac for channel tune-up and diagnostics is described. The multiwire proportional chamber design is discussed, and descriptions and drawings of the gate card, the amplifier/multiplexer card, the output amplifier card, and the overall system are given

  3. Storage array reflection considerations

    International Nuclear Information System (INIS)

    Haire, M.J.; Jordan, W.C.; Taylor, R.G.

    1997-01-01

    The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water reflected (i.e., surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established. When evaluating arrays, it has become more common for analysts to use calculations to demonstrate the safety of the array configuration. In performing these calculations, the analyst has considerable freedom concerning the assumptions made for modeling the reflection of the array. Considerations are given for the physical layout of the array with little or no discussion (or demonstration) of what conditions are bounded by the assumed reflection conditions. For example, an array may be generically evaluated by placing it in a corner of a room in which the opposing walls are far away. Typically, it is believed that complete flooding of the room is incredible, so the array is evaluated for various levels of water mist interspersed among array containers. This paper discusses some assumptions that are made regarding storage array reflection

  4. The Reflective Foundation

    DEFF Research Database (Denmark)

    Lunde Jørgensen, Ida

    Private foundations and cultural philanthropy by élites is viewed with increasing skepticism in recent years, begging the question of the extent to which foundations reflect on their role vis a vis wider societal norms. Through the prism of the New Carlsberg Foundation, financed by the brewery...... Carlsberg A/S, the paper seeks to elucidate the way in which one culturally significant foundation from Denmark has reflected on - and legitimated - its work and investments at critical moments in the past decades. The paper indicates a foundation with a high degree of reflection on the wider societal...

  5. BWR AXIAL PROFILE

    International Nuclear Information System (INIS)

    Huffer, J.

    2004-01-01

    The purpose of this calculation is to develop axial profiles for estimating the axial variation in burnup of a boiling water reactor (BWR) assembly spent nuclear fuel (SNF) given the average burnup of an assembly. A discharged fuel assembly typically exhibits higher burnup in the center and lower burnup at the ends of the assembly. Criticality safety analyses taking credit for SNF burnup must account for axially varying burnup relative to calculations based on uniformly distributed assembly average burnup due to the under-burned tips. Thus, accounting for axially varying burnup in criticality analyses is also referred to as accounting for the ''end effect'' reactivity. The magnitude of the reactivity change due to ''end effect'' is dependent on the initial assembly enrichment, the assembly average burnup, and the particular axial profile characterizing the burnup distribution. The set of bounding axial profiles should incorporate multiple BWR core designs and provide statistical confidence (95 percent confidence that 95 percent of the population is bound by the profile) that end nodes are conservatively represented. The profiles should also conserve the overall burnup of the fuel assembly. More background on BWR axial profiles is provided in Attachment I

  6. Design and evaluation of multi-indicator profiles for targeted-selective treatment against gastrointestinal nematodes at housing in adult dairy cows.

    Science.gov (United States)

    Ravinet, Nadine; Lehebel, Anne; Bareille, Nathalie; Lopez, Carlos; Chartier, Christophe; Chauvin, Alain; Madouasse, Aurélien

    2017-04-15

    Targeted-selective treatments against gastrointestinal nematode (GIN) in adult dairy cows require the identification of "cows to treat", i.e. cows whose milk production (MP) would increase after treatment. This study aimed at quantifying the ability of multi-indicator profiles to identify such cows. A randomized controlled clinical trial was conducted at housing in 25 French pasturing dairy herds. In each herd, treated cows received fenbendazole orally, control cows remained untreated. Daily MP was recorded and the MP variation between the pre- and post-visit periods was calculated (ΔMP) for each cow. ΔMP was modelled with control cows data (n=412) (piecewise linear mixed model). Estimated parameters were applied to treated cows data (n=414) to predict the expected ΔMP in treated cows if they had not been treated. Treated cows with an observed ΔMP (with treatment) higher than the expected ΔMP (without treatment) were labelled as "cows to treat". Herds where at least 50% of the young cows were "cows to treat" were qualified as "herds to target". To characterize such cows and herds, the available candidate indicators were (i) at the cow-level: parity, stage of lactation and production level, faecal egg count (FEC), serum pepsinogen level and anti-Ostertagia antibody level (expressed as ODR); (ii) at the herd-level: bulk tank milk (BTM) Ostertagia ODR, Time of Effective Contact (TEC, in months) with GIN infective larvae before the first calving, and percentage of positive FEC. These indicators were tested one-by-one or in combination to assess their ability to characterize "herds to target" and "cows to treat" (Chi-square tests). 115 out of 414 treated cows (27.8%) were considered as "cows to treat", and 9 out of 22 herds were qualified as "herds to target". The indicators retained to profile such cows and herds were the parity, the production level, the BTM Ostertagia ODR and the TEC. Multi-indicator profiles were much more specific than single indicator

  7. Seasonal soybean crop reflectance

    Science.gov (United States)

    Lemaster, E. W. (Principal Investigator); Chance, J. E.

    1983-01-01

    Data are presented from field measurements of 1980 including 5 acquisitions of handheld radiometer reflectance measurements, 7 complete sets of parameters for implementing the Suits mode, and other biophysical parameters to characterize the soybean canopy. LANDSAT calculations on the simulated Brazilian soybean reflectance are included along with data collected during the summer and fall on 1981 on soybean single leaf optical parameters for three irrigation treatments. Tests of the Suits vegetative canopy reflectance model for the full hemisphere of observer directions as well as the nadir direction show moderate agreement for the visible channels of the MSS and poor agreement in the near infrared channel. Temporal changes in the spectral characteristics of the single leaves were seen to occur as a function of maturity which demonstrates that the absorptance of a soybean single leaf is more a function of thetransmittancee characteristics than the seasonally consistent single leaf reflectance.

  8. Wave reflections from breakwaters

    OpenAIRE

    Dickson, William S.

    1994-01-01

    A new method is presented for estimating the reflection of a random, multi-directional sea from a coastal structure. The technique is applicable to an array of wave gauges of arbitrary geometry deployed seaward of the reflector. An expansion for small oblique wave incidence angles is used to derive an approximate relationship between measured array cross-spectra and a small number of parameters that describe the incident wave properties and the reflectivity of the structure. Model tests with ...

  9. The emerging South African profile in Africa: Reflections on the ...

    African Journals Online (AJOL)

    1998-10-21

    Oct 21, 1998 ... arrangements, the South African government has embarked upon a process of planning for ... Norway, Canada, Sweden and the Netherlands, and developing ... prime focus for future engagements" (Department of Foreign Affairs 1999:22) ... strong voice in debates on multinational conflict management and ...

  10. Low profile conformal antenna arrays on high impedance substrate

    CERN Document Server

    Singh, Hema; Jha, Rakesh Mohan

    2016-01-01

    This book presents electromagnetic (EM) design and analysis of dipole antenna array over high impedance substrate (HIS). HIS is a preferred substrate for low-profile antenna design, owing to its unique boundary conditions. Such substrates permit radiating elements to be printed on them without any disturbance in the radiation characteristics. Moreover HIS provides improved impedance matching, enhanced bandwidth, and increased broadside directivity owing to total reflection from the reactive surface and high input impedance. This book considers different configurations of HIS for array design on planar and non-planar high-impedance surfaces. Results are presented for cylindrical dipole, printed dipole, and folded dipole over single- and double-layered square-patch-based HIS and dogbone-based HIS. The performance of antenna arrays is analyzed in terms of performance parameters such as return loss and radiation pattern. The design presented shows acceptable return loss and mainlobe gain of radiation pattern. Thi...

  11. Selectively reflective transparent sheets

    Science.gov (United States)

    Waché, Rémi; Florescu, Marian; Sweeney, Stephen J.; Clowes, Steven K.

    2015-08-01

    We investigate the possibility to selectively reflect certain wavelengths while maintaining the optical properties on other spectral ranges. This is of particular interest for transparent materials, which for specific applications may require high reflectivity at pre-determined frequencies. Although there exist currently techniques such as coatings to produce selective reflection, this work focuses on new approaches for mass production of polyethylene sheets which incorporate either additives or surface patterning for selective reflection between 8 to 13 μ m. Typical additives used to produce a greenhouse effect in plastics include particles such as clays, silica or hydroxide materials. However, the absorption of thermal radiation is less efficient than the decrease of emissivity as it can be compared with the inclusion of Lambertian materials. Photonic band gap engineering by the periodic structuring of metamaterials is known in nature for producing the vivid bright colors in certain organisms via strong wavelength-selective reflection. Research to artificially engineer such structures has mainly focused on wavelengths in the visible and near infrared. However few studies to date have been carried out to investigate the properties of metastructures in the mid infrared range even though the patterning of microstructure is easier to achieve. We present preliminary results on the diffuse reflectivity using FDTD simulations and analyze the technical feasibility of these approaches.

  12. Thoughts on Reflection (Editorial

    Directory of Open Access Journals (Sweden)

    Denise Koufogiannakis

    2010-06-01

    Full Text Available There has been some acknowledgement in the published literature that reflection is a crucial element of the evidence based library and information practice (EBLIP model we have adopted (Booth 2004, 2006; Grant 2007; Helliwell 2007. As we work through a problem and try to incorporate the best available evidence into our decision making, reflection is required at several stages, including the very identification of the problem through to our assessment of the process itself and what we have learned in order to inform future practice. However, reflection and reflective writing have not fully been integrated into the process we espouse, and very little has been done to look more closely at this element of the model and how it can be integrated into professional learning.In a recently published research article, Sen (2010 confirms the relationship between reflection and several aspects of professional practice. These include critical review and decision making, two aspects that are tied closely to the evidence based process. Sen notes: Students were more likely to show evidence of learning, self‐development, the ability to review issues crucially, awareness of their own mental functions, ability to make decision [sic] and being empowered when they had mastered the art of reflective practice and the more deeply analytical reflective writing. (p.84 EBLIP (the journal tries to incorporate elements of reflection within the articles we publish. While we clearly believe in the need for our profession to do quality research and publish that research so that it can be accessible to practitioners, we also know that research cannot be looked at in isolation. Our evidence summaries are one way of reflecting critically on previously published research, and in the same vein, our classics bring older research studies back to the foreground. This work needs to continue to be discussed and looked at for its impact on our profession.More directly, the Using

  13. Methodological Reflections on Working with Young Children

    DEFF Research Database (Denmark)

    Korn, Matthias

    2009-01-01

    This paper provides methodological reflections on an evolutionary and participatory software development process for designing interactive systems with children of very young age. The approach was put into practice for the design of a software environment for self-directed project management...

  14. Neutron reflectivity studies of ionomer blends

    CERN Document Server

    Gabrys, B J; Bucknall, D G; Vesely, D; Braiewa, R; Weiss, R A

    2002-01-01

    Preliminary results are presented of a neutron reflectivity study of the interfacial width between lithium- and zinc-sulphonated deuterated polystyrene with polycarbonate (PC). Both systems are partially miscible and exhibit an upper critical solution temperature behaviour. The interdiffusion in these systems was measured by annealing at a temperature above the glass-transition temperature of both polymers. The interfacial profiles obtained for these systems were described by symmetric Gaussian interfaces. No significant diffusion was observed. (orig.)

  15. Reflections around Artefacts: Using a Deliberative Approach to Teaching Reflective Practices in Fashion Studies

    Science.gov (United States)

    Ryan, Michael; Brough, Dean

    2012-01-01

    While requiring students to think reflectively is a desirable teaching goal, it is often fraught with complexity and is sometimes poorly implemented in higher education. In this paper, we describe an approach to academic reflective practices that fitted a design subject in fashion education and was perceived as effective in enhancing student…

  16. Positive Stress and Reflective Practice Among Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Kati Tikkamäki

    2016-01-01

    Full Text Available While heavy stress loads seem an unavoidable aspect of entrepreneurship, the positive side of stress (often referred to as ‘eustress’ remains a neglected area of research. This paper contributes to entrepreneurship research by linking the research streams of eustress and reflective practice. As a tool for analysing and developing thoughts and actions, reflective practice plays an important role in the interpretative work essential to positive stress experiences. Following an overview of approaches to stress at work, eustress and reflective practice, the paper explores how entrepreneurs experience the role of positive stress and reflective practice in their work and describes the reflective tools utilized by entrepreneurs in promoting eustress. The research process was designed to support reflective dialogue among the 21 Finnish entrepreneurs from different fields who participated in the study, with results based mainly on qualitative interviews. Nine of the interviewed entrepreneurs also kept a positive stress diary, including a three-day physiological measurement analysing their heartbeat variability. The findings suggest that positive stress and reflective practice are intertwined in the experiences of entrepreneurs and illustrate the role of reflective practice as a crucial toolset for promoting positive stress, comprising six reflective tools: studying oneself, changing one’s point of view, putting things into perspective, harnessing a feeling of trust, regulating resources and engaging in dialogue. Individual reflective capabilities vary, and a theory-driven division of reflective practice into individual, social and contextual dimensions is considered useful in understanding those differences. The research offers a starting point for exploring how eustress and reflective practice affect the well-being of entrepreneurs

  17. Creation, Identity and Reflection

    Directory of Open Access Journals (Sweden)

    Alina Beatrice Cheşcă

    2015-05-01

    Full Text Available The paper “Creation, Identity and Reflection” approaches the identification in the “mirror” of reality with creation, in other words seeking the authors’ identity in the reflected images. Reflection means attempting to find oneself, the mirror being the main principle of creation. Many characters become interesting only when they step into the world beyond the mirror, when their faces are doubled by the other self or when their selves are returned by other characters. The narcissistic concept of the mirror, i.e. the reflection in the mirror and the representation of the mirror itself, is a recurrent one in literature, but the reflection of the self which is not the self (as it is a reflection does not necessarily appear in a mirror or in a photograph or portrait. Sometimes, the not-self is returned to the self by another person or character. As far as Oscar Wilde’s theories are concerned, the main idea is that people are interesting for their masks, not for their inner nature. What Wilde calls “inner nature” is the characters’ un-reflected self and the mask is the reflection, the self in the mirror. Some characters’ relationships develop within a fiction that they dramatically try to preserve and protect with the risk of suffering. They refuse to take off the masks which define them in the others’ minds and hearts; the narcissistic individuals (both artists and characters seek and love their own image which they project upon facts, thus creating a fictive realm.

  18. Global Explorers Journaling and Reflection Initiative

    Directory of Open Access Journals (Sweden)

    John Bennion

    2016-12-01

    Full Text Available Research suggests that journaling will increase reflection and improve program outcomes (Bain, et al, 1999; Duerden, et al, 2012 This study involved a partnership with a non-profit, Global Explorers (GEx, which provides international immersion experiences for youth. Their programs are designed to teach youth participants principles of leadership, environmental awareness, service, and science. This study, which tested whether teaching journaling techniques to youth program facilitators would have a positive impact on participant outcomes, addressed the following hypotheses: 1 Greater training in reflective thinking among participants would be associated with higher outcome scores, and 2 Participants in the intervention group (facilitators trained in journaling pedagogy would show greater increases in reflective thinking than comparison group members. Results based on participant self-assessment were significant in testing the first hypothesis; reflective thinking is positively associated with outcome measures, but the intervention group did not show increases in reflective thinking.

  19. Specialized Color Targets for Spectral Reflectance Reconstruction of Magnified Images

    Science.gov (United States)

    Kruschwitz, Jennifer D. T.

    Digital images are used almost exclusively instead of film to capture visual information across many scientific fields. The colorimetric color representation within these digital images can be relayed from the digital counts produced by the camera with the use of a known color target. In image capture of magnified images, there is currently no reliable color target that can be used at multiple magnifications and give the user a solid understanding of the color ground truth within those images. The first part of this dissertation included the design, fabrication, and testing of a color target produced with optical interference coated microlenses for use in an off-axis illumination, compound microscope. An ideal target was designed to increase the color gamut for colorimetric imaging and provide the necessary "Block Dye" spectral reflectance profiles across the visible spectrum to reduce the number of color patches necessary for multiple filter imaging systems that rely on statistical models for spectral reflectance reconstruction. There are other scientific disciplines that can benefit from a specialized color target to determine the color ground truth in their magnified images and perform spectral estimation. Not every discipline has the luxury of having a multi-filter imaging system. The second part of this dissertation developed two unique ways of using an interference coated color mirror target: one that relies on multiple light-source angles, and one that leverages a dynamic color change with time. The source multi-angle technique would be used for the microelectronic discipline where the reconstructed spectral reflectance would be used to determine a dielectric film thickness on a silicon substrate, and the time varying technique would be used for a biomedical example to determine the thickness of human tear film.

  20. Theory of relativistic radiation reflection from plasmas

    Science.gov (United States)

    Gonoskov, Arkady

    2018-01-01

    We consider the reflection of relativistically strong radiation from plasma and identify the physical origin of the electrons' tendency to form a thin sheet, which maintains its localisation throughout its motion. Thereby, we justify the principle of relativistic electronic spring (RES) proposed in [Gonoskov et al., Phys. Rev. E 84, 046403 (2011)]. Using the RES principle, we derive a closed set of differential equations that describe the reflection of radiation with arbitrary variation of polarization and intensity from plasma with an arbitrary density profile for an arbitrary angle of incidence. We confirm with ab initio PIC simulations that the developed theory accurately describes laser-plasma interactions in the regime where the reflection of relativistically strong radiation is accompanied by significant, repeated relocation of plasma electrons. In particular, the theory can be applied for the studies of plasma heating and coherent and incoherent emissions in the RES regime of high-intensity laser-plasma interaction.

  1. Investigating murals with terahertz reflective tomography

    Science.gov (United States)

    Yuan, Minjie; Sun, Wenfeng; Wang, Xinke; Wang, Sen; Zhang, Qunxi; Ye, Jiasheng; Zhang, Yan

    2015-08-01

    Terahertz time-domain spectroscopy (THz-TDS) imaging technology has been proposed to be used in the non-invasive detection of murals. THz-TDS images provide structural data of the sample that cannot be obtained with other complementary techniques. In this paper, two types of defects hidden in the plaster used to simulate the cases of defects in the murals, have been investigated by the terahertz reflected time domain spectroscopy imaging system. These preset defects include a leaf slice and a slit built in the plaster. With the terahertz reflective tomography, information about defects has been determined involving the thickness from the surface of sample to the built-in defect, the profile and distribution of the defect. With this THz tomography, different defects with the changes of optical thickness and their relative refractive index have been identified. The application of reflective pulsed terahertz imaging has been extended to the defect detection of the murals.

  2. An optical fiber expendable seawater temperature/depth profile sensor

    Science.gov (United States)

    Zhao, Qiang; Chen, Shizhe; Zhang, Keke; Yan, Xingkui; Yang, Xianglong; Bai, Xuejiao; Liu, Shixuan

    2017-10-01

    Marine expendable temperature/depth profiler (XBT) is a disposable measuring instrument which can obtain temperature/depth profile data quickly in large area waters and mainly used for marine surveys, scientific research, military application. The temperature measuring device is a thermistor in the conventional XBT probe (CXBT)and the depth data is only a calculated value by speed and time depth calculation formula which is not an accurate measurement result. Firstly, an optical fiber expendable temperature/depth sensor based on the FBG-LPG cascaded structure is proposed to solve the problems of the CXBT, namely the use of LPG and FBG were used to detect the water temperature and depth, respectively. Secondly, the fiber end reflective mirror is used to simplify optical cascade structure and optimize the system performance. Finally, the optical path is designed and optimized using the reflective optical fiber end mirror. The experimental results show that the sensitivity of temperature and depth sensing based on FBG-LPG cascade structure is about 0.0030C and 0.1%F.S. respectively, which can meet the requirements of the sea water temperature/depth observation. The reflectivity of reflection mirror is in the range from 48.8% to 72.5%, the resonant peak of FBG and LPG are reasonable and the whole spectrum are suitable for demodulation. Through research on the optical fiber XBT (FXBT), the direct measurement of deep-sea temperature/depth profile data can be obtained simultaneously, quickly and accurately. The FXBT is a new all-optical seawater temperature/depth sensor, which has important academic value and broad application prospect and is expected to replace the CXBT in the future.

  3. Uses of Technology to Support Reflective Teaching Practices

    Science.gov (United States)

    Brent, Wayne

    2010-01-01

    This dissertation researched and reported on how technology was used to facilitate and inform reflective teaching practices. It also identified the characteristics of benefits and barriers in using technology for teaching and reflection. The study, descriptive in nature, was designed to determine the reflective practices of instructors and how…

  4. How to design a program of clinical biochemistry, for health technicians in clinical laboratory profile taking into account the new teaching approaches?

    Directory of Open Access Journals (Sweden)

    Mercedes Moleiro Hernández

    2007-06-01

    Full Text Available The formation process of the Licentiate in Health Technology of the profile of Clinical Laboratory is based in the mastery of the essential knowledge that, linked with the performance ways, allow him the solution of the professional problems he faces, as part of the health team of his specialty, so that within his teaching curriculum a group of subjects are included which have a special linking with the labor practice that the students carry out, on the base of a new didactic approach, starting from invariants of didactics as science which energize the teaching-learning process, and taking as base structure the didactic unity, which makes possible that the student consolidates his learning, achieving partial objectives, but around a well defined object of learning.

  5. Educating the Reflective Educator

    DEFF Research Database (Denmark)

    Hjorth, Mikkel; Smith, Rachel Charlotte; Iversen, Ole Sejer

    2016-01-01

    , (2) managing digital and analogue design materials and (3) balancing different modes of teaching. This paper demonstrates how a combination of design theory, in-school practice and peer-to-peer learning created a framework towards educating design educators – a framework that allowed us......Design thinking and digital technologies are increasingly introduced in education to develop children’s design literacy. This shift demands a change in teachers’ mindsets, capabilities and approaches to design and technology as well as new teaching practices. This paper reports on a research......-based master's course developed to address and study the challenges that educators experience when teaching design in K-12 classes. We investigate three aspects that we argue are crucial when developing teachers' capability to teach design literacy to children: (1) ability to navigate a complex design process...

  6. Self-Reflection

    DEFF Research Database (Denmark)

    Fausing, Bent

    2018-01-01

    Reflecting has a double meaning, mirroring and thinking. The seminar will investigate how these two meanings intervene in each other. As we perceive we are already in pre-refectory state, and thinking involves a lot of not only thoughts, but also of senses and sensing, wherefrom our thoughts star...

  7. Worship, Reflection, Empirical Research

    OpenAIRE

    Ding Dong,

    2012-01-01

    In my youth, I was a worshipper of Mao Zedong. From the latter stage of the Mao Era to the early years of Reform and Opening, I began to reflect on Mao and the Communist Revolution he launched. In recent years I’ve devoted myself to empirical historical research on Mao, seeking the truth about Mao and China’s modern history.

  8. Reflections on 21 years

    International Nuclear Information System (INIS)

    Eklund, S.; Mandel, H.; Teller, E.

    1977-01-01

    Personal reflections after twenty one years of nuclear power are presented by a number of those who were international figures in the nuclear energy field during that period. Lessons learnt, achievements, prospects and predictions for the future are discussed in eleven brief surveys. (U.K.)

  9. Reflection by Porro Prisms

    Science.gov (United States)

    Greenslade, Thomas B.

    2010-04-01

    Students all know that reflection from a plane mirror produces an image that is reversed right to left and so cannot be read by anyone but Leonardo da Vinci, who kept his notes in mirror writing. A useful counter-example is the Porro prism, which produces an image that is not reversed.

  10. Value reflected health education

    DEFF Research Database (Denmark)

    Wistoft, Karen; Nordentoft, Helle Merete

    2011-01-01

    This article examines the impact of a value-reflected approach in health education by demonstrating the nature of professional competence development connected to this approach. It is based on findings from two three-year health educational development projects carried out by school health nurses...... develop pedagogical competences in health education improving school childrens’ health....

  11. Reflection on Political Representation

    DEFF Research Database (Denmark)

    Kusche, Isabel

    2017-01-01

    This article compares how Members of Parliament in the United Kingdom and Ireland reflect on constituency service as an aspect of political representation. It differs from existing research on the constituency role of MPs in two regards. First, it approaches the question from a sociological viewp...

  12. Onward: Reflections on Mentoring

    Science.gov (United States)

    Williams, Kimberley Buster

    2018-01-01

    The author has been blessed with great mentors throughout her career. When she was invited to participate in the Leadership University of Mary Washington (UMW), a mentoring program at her institution, she did not hesitate to say yes. In this article, the author shares her reflections on mentoring.

  13. Interferometric reflection moire

    Science.gov (United States)

    Sciammarella, Cesar A.; Combell, Olivier

    1995-06-01

    A new reflection moire technique is introduced in this paper. The basic equations that relate the measurement of slopes to the basic geometric and optical parameters of the system are derived. The sensitivity and accuracy of the method are discussed. Examples of application to the study of silicon wafers and electronic chips are given.

  14. Reflection on robotic intelligence

    NARCIS (Netherlands)

    Bartneck, C.

    2006-01-01

    This paper reflects on the development or robots, both their physical shape as well as their intelligence. The later strongly depends on the progress made in the artificial intelligence (AI) community which does not yet provide the models and tools necessary to create intelligent robots. It is time

  15. Reflections on "La Esperanza"

    Science.gov (United States)

    Cortez, Anita

    2007-01-01

    The author was recently asked to reflect on her "educational journey." As far as she can remember she has been hungry to learn. A friend once described her as having "hambres atrasadas," which he described as a kind of "hunger nipping at her heels." It goes back, of course, to her parents: Her father's and her early…

  16. Reflecting on Writing Autobiography

    Science.gov (United States)

    Begg, Andy

    2011-01-01

    The following reflections relate to the reasons for and an approach to an autobiographic task, the notions that underpin it, and some thoughts about the quality and value of such a project. The focus was on the ways one views curriculum change over time; and the intention was to provide an example that others may sense as either familiar or at…

  17. Reflections on the Field.

    Science.gov (United States)

    Kauffman, James M.

    2003-01-01

    Reflections on the field of special education offer six ideas: (1) the value of science; (2) the continuing value of separate and special education for some students; (3) the continuing importance of prevention; (4) the importance of academic instruction; (5) the importance of social justice for the poor; and (6) a renewed emphasis on human…

  18. Reflections, 15 Years Later

    Science.gov (United States)

    Knox, George

    2016-01-01

    George Knox reflects on his 15-year career as president of Labette Community College in Parsons, Kansas. Knox writes that, as a first-time president coming into a brand new system, he was very fortunate to have many seasoned presidents and mentors in Kansas and from the American Association of Community Colleges' (AACC) Presidents Academy. He says…

  19. The Effects of Coaching Using a Reflective Framework on Early Childhood Science Teachers' Depth of Reflection and Change in Practice

    Science.gov (United States)

    Bloomquist, Debra L.

    This embedded-mixed methods study examined if the use of a reflective framework with guiding prompts could support early childhood science teachers in improving their reflective practice and subsequently changing their pedagogy. It further investigated whether type of cognitive coaching group, individual or collaborative, impacted teacher depth of reflection and change in practice. Data included teacher reflections that were rated using the Level of Reflection-On-Action Assessment, reflective codes and inductive themes, as well as videos of participants lessons coded using the SCIIENCE instrument. Findings demonstrated that through guided reflection, teachers developed reflective thinking skills, and through this reflection became more critical and began to improve their pedagogical practice. Further findings supported that collaborative cognitive coaching may not be the most effective professional development for all teachers; as some teachers in the study were found to have difficulty improving their reflectivity and thus their teaching practice. Based on these findings it is recommended that coaches and designers of professional development continue to use reflective frameworks with guiding prompts to support teachers in the reflective process, but take into consideration that coaching may need to be differentiated for the various reflective levels demonstrated by teachers. Future studies will be needed to establish why some teachers have difficulty with the reflective process and how coaches or designers of professional development can further assist these teachers in becoming more critical reflectors.

  20. Modelos de perfil de velocidad para evaluación de consistencia del trazado en carreteras de la provincia de Villa Clara, Cuba Speed profile models for evaluation of design consistency in road of the province of Villa Clara, Cuba

    Directory of Open Access Journals (Sweden)

    René A. García Depestre

    2012-08-01

    Full Text Available Entre los aspectos relativos a la carretera que influyen en la accidentalidad, tiene un gran peso el diseño geométrico, internacionalmente el método más empleado para la evaluación del diseño es a partir de la consistencia del trazado con modelos de perfil de velocidades de operación. Cuba no cuenta con modelos propios que consideren las características de las carreteras y los conductores, por lo que es necesario desarrollar modelos de predicción de velocidades para la evaluación de la consistencia del trazado. El desarrollo de modelos de predicción del perfil de velocidades de operación para diferentes condiciones de alineación en carreteras rurales de dos carriles en el contexto de Cuba, se efectúa a partir de características geométricas y velocidades puntuales, con análisis estadístico de las principales variables que relacionan la velocidad con el diseño. Una vez desarrollados los modelos, se aplican a un tramo de carretera declarado como tramo de concentración de accidentes (TCA de la provincia de Villa Clara localizada en la región central de Cuba, los resultados obtenidos confirman la validez de los modelos desarrollados para determinar los perfiles de velocidad de operación y de esta forma, evaluar la consistencia del trazado, con el objetivo de detectar los lugares de mayores dificultades con relación al trazado.Among the aspects that influence road accidents, geometric design is the most relevant. The most used method for evaluating the design all over the world is based on the design consistency with speed profile models of operation. Cuba does not have proprietary models that consider the characteristics of the roads and drivers, so it is necessary to develop predictive models for the evaluation of design consistency. The development of operating speed profile prediction models for different alignment conditions on rural roads with two lanes in the context of Cuba is made from the geometric characteristics and

  1. Existing reflection seismic data re-processing

    International Nuclear Information System (INIS)

    Higashinaka, Motonori; Sano, Yukiko; Kozawa, Takeshi

    2005-08-01

    This document is to report the results of existing seismic data re-processing around Horonobe town, Hokkaido, Japan, which is a part of the Horonobe Underground Research Project. The main purpose of this re-processing is to recognize the subsurface structure of Omagari Fault and fold system around Omagari Fault. The seismic lines for re-processing are TYHR-A3 line and SHRB-2 line, which JAPEX surveyed in 1975. Applying weathering static correction using refraction analysis and noise suppression procedure, we have much enhanced seismic profile. Following information was obtained from seismic re-processing results. TYHR-A3 line: There are strong reflections, dipping to the west. These reflections are corresponding western limb of anticline to the west side of Omagari Fault. SHRB-2 line: There are strong reflections, dipping to the west, at CDP 60-140, while there are reflections, dipping to the east, to the east side of CDP 140. These reflections correspond to the western limb and the eastern limb of the anticline, which is parallel to Omagari FAULT. This seismic re-processing provides some useful information to know the geological structure around Omagari Fault. (author)

  2. Vibrant Interior Reflects Lifestyle. 1974 Award Winning Architecture

    Science.gov (United States)

    American School and University, 1974

    1974-01-01

    The design of the student center at Essex Community College in Baltimore County, Maryland, reflects youthful lifestyles in the interior decor while providing exterior design to harmonize with existing campus buildings. (Author/MF)

  3. Being a reflective teacher——reflection on group management

    Institute of Scientific and Technical Information of China (English)

    Pan; Lehui

    2015-01-01

    <正>Introduction According to Pollard and Triggs(1997),reflective teaching is a process through which the capacity to make such professional judgments can be developed and maintained.Then what is a reflective teacher?Reflective teacher is someone who reflects systematically on her practice in a constant attempt to improve

  4. Ethical reflection and psychotherapy.

    Science.gov (United States)

    Vyskocilová, Jana; Prasko, Jan

    2013-01-01

    Theories of ethics and ethical reflection may be applied to both theory and practice in psychotherapy. There is a natural affinity between ethics and psychotherapy. Psychotherapy practice is concerned with human problems, dilemmas and emotions related to both one's own and other people's values. Ethics is also concerned with dilemmas in human thinking and with how these dilemmas reflect other individuals' values. Philosophical reflection itself is not a sufficient basis for the ethics of psychotherapy but it may aid in exploring attitudes related to psychotherapy, psychiatry and health care. PubMed, Web of Science and Scopus databases were searched for articles containing the keywords "psychotherapy", "ethics", "therapeutic relationship" and "supervision". The search was conducted by repeating the terms in various combinations without language or time restrictions. Also included were data from monographs cited in reviews. The resulting text is a review with conclusions concerning ethical aspects of psychotherapy. The ability to behave altruistically, sense for justice and reciprocity and mutual help are likely to be genetically determined as dispositions to be later developed by upbringing or to be formed or deformed by upbringing. Early experiences lead to formation of ethical attitudes which are internalized and then applied to both one's own and other people's behavior. Altruistic behavior has a strong impact on an individual's health and its acceptance may positively influence the pathophysiological mechanisms underlying numerous diseases. Ethical theory and reflection, however, may be applied to both theory and practice of psychotherapy in a conscious, targeted and thoughtful manner. In everyday practice, psychotherapists and organizations must necessarily deal with conscious conflicts between therapeutic possibilities, clients' wishes, their own as well as clients' ideas and the real world. Understanding one's own motives in therapy is one of the aims of a

  5. Traveler Profile

    International Development Research Centre (IDRC) Digital Library (Canada)

    By virtue of completing this form, I hereby consent and agree that any of my personal information provided herein, including any update thereto, as collected by the Centre or its designate, may be disclosed to, used or retained by any outside third party designated by the Centre. (including air carriers, hotels, car rental ...

  6. Analysis for the Curricular Design of Tourism Studies in the Dominican Republic: Competences and Professional Profiles to Enable the Prospective Development of the Tourism

    Directory of Open Access Journals (Sweden)

    David Peguero Manzanares

    2014-06-01

    Full Text Available This paper presents a research project launched by the Ministry of Higher Education, Science and Technology of the Dominican Republic in 2011 with the aim of drawing up a formal and methodological basis that is used as a guideline to redefine the Bachelor’s Degree in Tourism. The main strategic lines of action derived from two essential requirements: the need to cater for a wider range of professional profiles and the need for curricular touristification. On the one hand, the focus was on the development of the graduates’ competences in all the cognitive areas involved in tourism to enable them to set up and manage tourist companies, products and destinations. This would generate innovative options of economic revitalization, decentralizing the current focus on the hospitality industry and incorporating new professional contexts with growth potential in the Dominican tourism sector. On the other hand, tourism-related subjects were reinforced and close cooperation with professionals on active service was highly recommended. Given the heterogeneity of current and potential local tourist destinations, the idiosyncrasy of each regional educational setting was taken into account to encourage entrepreneurship by empowering future managers of small and medium sized companies to make the most of their resources.

  7. Constructing Data Curation Profiles

    Directory of Open Access Journals (Sweden)

    Michael Witt

    2009-12-01

    Full Text Available This paper presents a brief literature review and then introduces the methods, design, and construction of the Data Curation Profile, an instrument that can be used to provide detailed information on particular data forms that might be curated by an academic library. These data forms are presented in the context of the related sub-disciplinary research area, and they provide the flow of the research process from which these data are generated. The profiles also represent the needs for data curation from the perspective of the data producers, using their own language. As such, they support the exploration of data curation across different research domains in real and practical terms. With the sponsorship of the Institute of Museum and Library Services, investigators from Purdue University and the University of Illinois interviewed 19 faculty subjects to identify needs for discovery, access, preservation, and reuse of their research data. For each subject, a profile was constructed that includes information about his or her general research, data forms and stages, value of data, data ingest, intellectual property, organization and description of data, tools, interoperability, impact and prestige, data management, and preservation. Each profile also presents a specific dataset supplied by the subject to serve as a concrete example. The Data Curation Profiles are being published to a public wiki for questions and discussion, and a blank template will be disseminated with guidelines for others to create and share their own profiles. This study was conducted primarily from the viewpoint of librarians interacting with faculty researchers; however, it is expected that these findings will complement a wide variety of data curation research and practice outside of librarianship and the university environment.

  8. Reflections on Active Networking

    Science.gov (United States)

    2005-01-01

    with a Software Switch for Active Networks ”. We had initially called the project “ SoftSwitch ”, but after some concerns David Farber raised that this...Reflections on Active Networking Jonathan M. Smith CIS Department, University of Pennsylvania jms@cis.upenn.edu Abstract Interactions among...telecommunications networks , computers, and other peripheral devices have been of interest since the earliest distributed computing systems. A key

  9. Clinical linguistics: conversational reflections.

    Science.gov (United States)

    Crystal, David

    2013-04-01

    This is a report of the main points I made in an informal "conversation" with Paul Fletcher and the audience at the 14th ICPLA conference in Cork. The observations arose randomly, as part of an unstructured 1-h Q&A, so they do not provide a systematic account of the subject, but simply reflect the issues which were raised by the conference participants during that time.

  10. Superradiance or total reflection?

    CERN Document Server

    László, András

    2014-01-01

    Numerical evolution of massless scalar fields on Kerr background is studied. The initial data specifications are chosen to have compact support separated from the ergoregion and to yield nearly monochromatic incident wave packets. The initial data is also tuned to maximize the effect of superradiance. Evidences are shown indicating that instead of the anticipated energy extraction from black hole the incident radiation fail to reach the ergoregion rather it suffers a nearly perfect reflection.

  11. Polarizer reflectivity variations

    International Nuclear Information System (INIS)

    Ozarski, R.G.; Prior, J.

    1980-01-01

    On Shiva the beam energy along the chain is monitored using available reflections and/or transmission through beam steering, splitting, and polarizing optics without the intrusion of any additional glass for diagnostics. On the preamp table the diagnostic signal is obtained from the signal transmitted through turning mirrors. At the input of each chain the signal is obtained from the transmission through one of the mirrors used for the chain input alignment sensor (CHIP). At the chain output the transmission through the final turning mirror is used. These diagnostics have proved stable and reliable. However, one of the prime diagnostic locations is at the output of the beta rod. The energy at this location is measured by collecting small reflections from the last polarizer surface of the beta Pockels cell polarizer package. Unfortunately, calibration of this diagnostic has varied randomly, seldom remaining stable for a week or more. The cause of this fluctuation has been investigated for the past year and'it has been discovered that polarizer reflectivity varies with humidity. This report will deal with the possible causes that were investigated, the evidence that humidity is causing the variation, and the associated mechanism

  12. Experimental reconstruction of a highly reflecting fiber Bragg grating by using spectral regularization and inverse scattering.

    Science.gov (United States)

    Rosenthal, Amir; Horowitz, Moshe; Kieckbusch, Sven; Brinkmeyer, Ernst

    2007-10-01

    We demonstrate experimentally, for the first time to our knowledge, a reconstruction of a highly reflecting fiber Bragg grating from its complex reflection spectrum by using a regularization algorithm. The regularization method is based on correcting the measured reflection spectrum at the Bragg zone frequencies and enables the reconstruction of the grating profile using the integral-layer-peeling algorithm. A grating with an approximately uniform profile and with a maximum reflectivity of 99.98% was accurately reconstructed by measuring only its complex reflection spectrum.

  13. Spectral reflectance relationships to leaf water stress

    Science.gov (United States)

    Ripple, William J.

    1986-01-01

    Spectral reflectance data were collected from detached snapbean leaves in the laboratory with a multiband radiometer. Four experiments were designed to study the spectral response resulting from changes in leaf cover, relative water content of leaves, and leaf water potential. Spectral regions included in the analysis were red (630-690 nm), NIR (760-900 nm), and mid-IR (2.08-2.35 microns). The red and mid-IR bands showed sensitivity to changes in both leaf cover and relative water content of leaves. The NIR was only highly sensitive to changes in leaf cover. Results provided evidence that mid-IR reflectance was governed primarily by leaf moisture content, although soil reflectance was an important factor when leaf cover was less than 100 percent. High correlations between leaf water potentials and reflectance were attributed to covariances with relative water content of leaves and leaf cover.

  14. Rationale and design of feeding America's bravest: Mediterranean diet-based intervention to change firefighters' eating habits and improve cardiovascular risk profiles.

    Science.gov (United States)

    Sotos-Prieto, Mercedes; Cash, Sean B; Christophi, Costas A; Folta, Sara; Moffatt, Steven; Muegge, Carolyn; Korre, Maria; Mozaffarian, Dariush; Kales, Stefanos N

    2017-10-01

    Among US firefighters, cardiovascular disease is the leading cause of on-duty death. Poor diet contributes to this burden, but effective strategies to encourage healthy eating in the fire service are not established. "Feeding America's Bravest" motivates firefighters and their families to modify their food culture and reduce cardiometabolic risk profiles by adopting Mediterranean diet principles. Feeding America's Bravest is a cluster-randomized, controlled trial within the 44 stations of the Indianapolis Fire Department, including about 1000 firefighters. It compares a Mediterranean Diet Nutritional Intervention (MDNI) (group 1) vs. usual care (group 2) for 12months; followed by 12months of self-sustained continuation phase in the group 1 and cross-over to Mediterranean Diet Nutritional Intervention in group 2. Group 2 will receive the MDNI for 6months to test the efficacy of a shorter intervention followed by 6months of self-sustained phase. The intervention includes behavioral and environmental components. The primary outcome is 12-month change in Mediterranean diet score comparing group 1 vs. group 2; we will also assess 12- and 24-month change in group 1, and 6- and 12-month change in group 2, from baseline. Secondary outcomes are changes in body weight, body composition and other cardiometabolic risk markers; and correlations between self-reported dietary habits and biomarkers of dietary adherence. This innovative trial tests a novel worksite approach to introduce Mediterranean diet among US firefighters, through multi-pronged MDNI combining evidence-based behavior change strategies with economic incentives, family and peer support and environmental changes, informing recommendations for the US fire service and potentially other similar workforces. NCT02941757. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Extending Immunological Profiling in the Gilthead Sea Bream, Sparus aurata, by Enriched cDNA Library Analysis, Microarray Design and Initial Studies upon the Inflammatory Response to PAMPs

    Directory of Open Access Journals (Sweden)

    Sebastian Boltaña

    2017-02-01

    Full Text Available This study describes the development and validation of an enriched oligonucleotide-microarray platform for Sparus aurata (SAQ to provide a platform for transcriptomic studies in this species. A transcriptome database was constructed by assembly of gilthead sea bream sequences derived from public repositories of mRNA together with reads from a large collection of expressed sequence tags (EST from two extensive targeted cDNA libraries characterizing mRNA transcripts regulated by both bacterial and viral challenge. The developed microarray was further validated by analysing monocyte/macrophage activation profiles after challenge with two Gram-negative bacterial pathogen-associated molecular patterns (PAMPs; lipopolysaccharide (LPS and peptidoglycan (PGN. Of the approximately 10,000 EST sequenced, we obtained a total of 6837 EST longer than 100 nt, with 3778 and 3059 EST obtained from the bacterial-primed and from the viral-primed cDNA libraries, respectively. Functional classification of contigs from the bacterial- and viral-primed cDNA libraries by Gene Ontology (GO showed that the top five represented categories were equally represented in the two libraries: metabolism (approximately 24% of the total number of contigs, carrier proteins/membrane transport (approximately 15%, effectors/modulators and cell communication (approximately 11%, nucleoside, nucleotide and nucleic acid metabolism (approximately 7.5% and intracellular transducers/signal transduction (approximately 5%. Transcriptome analyses using this enriched oligonucleotide platform identified differential shifts in the response to PGN and LPS in macrophage-like cells, highlighting responsive gene-cassettes tightly related to PAMP host recognition. As observed in other fish species, PGN is a powerful activator of the inflammatory response in S. aurata macrophage-like cells. We have developed and validated an oligonucleotide microarray (SAQ that provides a platform enriched for the study

  16. Extending Immunological Profiling in the Gilthead Sea Bream, Sparus aurata, by Enriched cDNA Library Analysis, Microarray Design and Initial Studies upon the Inflammatory Response to PAMPs.

    Science.gov (United States)

    Boltaña, Sebastian; Castellana, Barbara; Goetz, Giles; Tort, Lluis; Teles, Mariana; Mulero, Victor; Novoa, Beatriz; Figueras, Antonio; Goetz, Frederick W; Gallardo-Escarate, Cristian; Planas, Josep V; Mackenzie, Simon

    2017-02-03

    This study describes the development and validation of an enriched oligonucleotide-microarray platform for Sparus aurata (SAQ) to provide a platform for transcriptomic studies in this species. A transcriptome database was constructed by assembly of gilthead sea bream sequences derived from public repositories of mRNA together with reads from a large collection of expressed sequence tags (EST) from two extensive targeted cDNA libraries characterizing mRNA transcripts regulated by both bacterial and viral challenge. The developed microarray was further validated by analysing monocyte/macrophage activation profiles after challenge with two Gram-negative bacterial pathogen-associated molecular patterns (PAMPs; lipopolysaccharide (LPS) and peptidoglycan (PGN)). Of the approximately 10,000 EST sequenced, we obtained a total of 6837 EST longer than 100 nt, with 3778 and 3059 EST obtained from the bacterial-primed and from the viral-primed cDNA libraries, respectively. Functional classification of contigs from the bacterial- and viral-primed cDNA libraries by Gene Ontology (GO) showed that the top five represented categories were equally represented in the two libraries: metabolism (approximately 24% of the total number of contigs), carrier proteins/membrane transport (approximately 15%), effectors/modulators and cell communication (approximately 11%), nucleoside, nucleotide and nucleic acid metabolism (approximately 7.5%) and intracellular transducers/signal transduction (approximately 5%). Transcriptome analyses using this enriched oligonucleotide platform identified differential shifts in the response to PGN and LPS in macrophage-like cells, highlighting responsive gene-cassettes tightly related to PAMP host recognition. As observed in other fish species, PGN is a powerful activator of the inflammatory response in S. aurata macrophage-like cells. We have developed and validated an oligonucleotide microarray (SAQ) that provides a platform enriched for the study of gene

  17. CFD Analysis of Water Solitary Wave Reflection

    Directory of Open Access Journals (Sweden)

    K. Smida

    2011-12-01

    Full Text Available A new numerical wave generation method is used to investigate the head-on collision of two solitary waves. The reflection at vertical wall of a solitary wave is also presented. The originality of this model, based on the Navier-Stokes equations, is the specification of an internal inlet velocity, defined as a source line within the computational domain for the generation of these non linear waves. This model was successfully implemented in the PHOENICS (Parabolic Hyperbolic Or Elliptic Numerical Integration Code Series code. The collision of two counter-propagating solitary waves is similar to the interaction of a soliton with a vertical wall. This wave generation method allows the saving of considerable time for this collision process since the counter-propagating wave is generated directly without reflection at vertical wall. For the collision of two solitary waves, numerical results show that the run-up phenomenon can be well explained, the solution of the maximum wave run-up is almost equal to experimental measurement. The simulated wave profiles during the collision are in good agreement with experimental results. For the reflection at vertical wall, the spatial profiles of the wave at fixed instants show that this problem is equivalent to the collision process.

  18. Reflection Revisited: The Class Collage

    Science.gov (United States)

    Sommers, Jeff

    2011-01-01

    Through the regular use of what Donald Schon has termed reflection-in-action and reflection-on-action, students can learn to improve their "reflection-in-presentation," in Kathleen Blake Yancey's term. Students are often asked to do this type of reflection-in-presentation as a capstone to first-year or basic writing courses. However, a number of…

  19. Reflection as Self-Assessment

    Science.gov (United States)

    Pappas, Marjorie L.

    2010-01-01

    In this article, the author discusses how reflection can be used as self-assessment. Reflection involves not only thinking about a learning experience, but also questioning parts of the experience. Reflection is thinking about what one knows from the learning experience, what one might do differently the next time. Reflection is wondering about…

  20. Bistable Reflective Etalon (BRET)

    National Research Council Canada - National Science Library

    Shellenbarger, Zane

    2003-01-01

    This project designed, fabricated, and characterized normal-incidence etalon structures at 1550 nm wavelength operation for application, as bistable elements, to photonic analog-to-digital conversion...

  1. A Declarative Approach to Architectural Reflection

    DEFF Research Database (Denmark)

    Ingstrup, Mads; Hansen, Klaus Marius

    2005-01-01

    which both creates runtime models of specific distributed architectures and allow for evaluation of AQL queries on these models. We illustrate the viability of the approach in two particular applications of such a model: constraint checking relative to an architectural style, and reasoning about certain......Recent research shows runtime architectural reflection is instrumental in, for instance, building adaptive and flexible systems or checking correspondence between design and implementation. Moreover, experience with computational reflection in various branches of computer science shows...... that the interface through which the meta-information of the running system is accessed, and possibly modified, lies at the heart of designing reflective systems. This paper proposes that such an interface should be like a database: accessed through queries expressed using the concepts with which architecture...

  2. Seismic reflection imaging, accounting for primary and multiple reflections

    Science.gov (United States)

    Wapenaar, Kees; van der Neut, Joost; Thorbecke, Jan; Broggini, Filippo; Slob, Evert; Snieder, Roel

    2015-04-01

    Imaging of seismic reflection data is usually based on the assumption that the seismic response consists of primary reflections only. Multiple reflections, i.e. waves that have reflected more than once, are treated as primaries and are imaged at wrong positions. There are two classes of multiple reflections, which we will call surface-related multiples and internal multiples. Surface-related multiples are those multiples that contain at least one reflection at the earth's surface, whereas internal multiples consist of waves that have reflected only at subsurface interfaces. Surface-related multiples are the strongest, but also relatively easy to deal with because the reflecting boundary (the earth's surface) is known. Internal multiples constitute a much more difficult problem for seismic imaging, because the positions and properties of the reflecting interfaces are not known. We are developing reflection imaging methodology which deals with internal multiples. Starting with the Marchenko equation for 1D inverse scattering problems, we derived 3D Marchenko-type equations, which relate reflection data at the surface to Green's functions between virtual sources anywhere in the subsurface and receivers at the surface. Based on these equations, we derived an iterative scheme by which these Green's functions can be retrieved from the reflection data at the surface. This iterative scheme requires an estimate of the direct wave of the Green's functions in a background medium. Note that this is precisely the same information that is also required by standard reflection imaging schemes. However, unlike in standard imaging, our iterative Marchenko scheme retrieves the multiple reflections of the Green's functions from the reflection data at the surface. For this, no knowledge of the positions and properties of the reflecting interfaces is required. Once the full Green's functions are retrieved, reflection imaging can be carried out by which the primaries and multiples are

  3. Microdosimetry: Reflections on Harald Rossi

    International Nuclear Information System (INIS)

    Kellerer, A.M.

    2002-01-01

    This and twelve previous Symposia reflect the evolution of microdosimetry, a field of research that has determined major new developments in radiation research, radiation protection, and radiology during the past four decades. The concepts of microdosimetry and its techniques were developed almost single handedly by H.H. Rossi. This memorial lecture outlines some of the ideas and some of the work of Harald Rossi that led to microdosimetry. It describes its major impact on radiobiology and, especially, its impact on studies with fast neutrons and on risk assessment. Microdosimetry was primarily designed as a tool for the elucidation of basic mechanisms of radiation action, but it has found its most important applications in the dosimetric measurement techniques that have become indispensable in radiation protection and in the dosimetry for radiation therapy. The advances of molecular biology are now providing new possibilities for a quantitative application of microdosimetry to radiobiology along the lines that Harald Rossi defined. (author)

  4. A fiberoptic reflection oximeter.

    Science.gov (United States)

    Landsman, M L; Knop, N; Kwant, G; Mook, G A; Zijlstra, W G

    1978-03-20

    A catheter tip oximeter is described consisting of a cardiac catheter containing optical fibers, and incandescent light source, a light detection unit and a processing unit. Half of the optical fibers guide the light to the blood at the tip of the catheter, the other half the backscattered (reflected) light to the detection unit. The detection unit contains a dichroic mirror, transmitting most of the light with lambda less than 800 nm and reflecting most of the light with lambda greater than 900 nm, thus splitting the light into two beams. These pass through interference filters with nominal wavelengths of 640 and 920 nm respectively, and are focused on silicium barrier layer photocells. The photocell signals are amplified and fed into a divider giving the ratio of measuring (R640) and compensating (R920) photocell output. The relationship between log R640/R920 and oxygen saturation is represented by a slightly curved line. The relation may be linearized by subtracting a constant voltage from the divided output before taking the logarithm. The slope of the calibration line is dependent on the total haemoglobin concentration. Nonetheless an average calibration line can be used between 70 and 100% oxygen saturation. For 78 measurements of pig blood samples in this range (haemoglobin concentration between 96 and 161 g.1(-1)), the standard deviation of the difference between the fiberoptic oximeter and a Radiometer OSM1 oxygen saturation meter was 1.9% saturation, for 152 samples over the entire saturation range the standard deviation of the difference was 3.1% saturation. The influence of the flow velocity of blood on the light reflection depends on wavelength as well as on oxygen saturation. Therefore, complete compensation for the flow effect is not possible by simple means.

  5. The in situ measurement of road reflection.

    NARCIS (Netherlands)

    Schreuder, D.A.

    1994-01-01

    This paper describes a procedure that has been designed to measure P(0;0), P(2;0) and P(1;90), the three values that are the basis for the C1-C2 system for measuring road reflection of light. The system was proposed in The Netherlands, and subsequently adopted by the CIE as an alternative to the

  6. Generating millimeter-wave Bessel beam with orbital angular momentum using reflective-type metasurface inherently integrated with source

    Science.gov (United States)

    Shen, Yizhu; Yang, Jiawei; Meng, Hongfu; Dou, Wenbin; Hu, Sanming

    2018-04-01

    Metasurfaces, orbital angular momenta (OAM), and non-diffractive Bessel beams have been attracting worldwide research. Combining the benefits of these three promising techniques, this paper proposes a metasurface-based reflective-type approach to generate a first-order Bessel beam carrying OAM. To validate this approach, a millimeter-wave metasurface is analyzed, designed, fabricated, and measured. Experimental results agree well with simulation. Moreover, this reflective-type metasurface, generating a Bessel beam with OAM, is inherently integrated with a planar feeding source in the same single-layer printed circuit board. Therefore, the proposed design features low profile, low cost, easy integration with front-end active circuits, and no alignment error between the feeding source and the metasurface.

  7. Reflections on preventive medicine.

    Science.gov (United States)

    Miettinen, Olli S

    2014-10-01

    Having thought much about medicine in my career-long effort to understand it and the research for its advancement, I have come to views rather different form the now-prevailing ones in respect to what preventive medicine is about; what epidemiology is in relation to preventive medicine; what distinguishes preventive medicine in preventive healthcare at large; the relation of preventive medicine to public health; the concept of health promotion; and also the core principles of preventive medicine. All of these views I set forth in this article, for the readers' critical reflection. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Matter reflects Antimatter

    CERN Document Server

    Bianconi, A.; Cristiano, A.; Leali, M.; Lodi Rizzini, E.; Venturelli, L.; Zurlo, N.

    2008-01-01

    It is common belief that the interaction between antimatter and ordinary solid matter is dominated by annihilation. However, non-destructive processes may play a relevant role too. One century ago E. Rutherford wrote about the "diffuse reflection" of alpha and beta particles by thin layers of different metals: "The observations ... of Geiger and Marsden on the scattering of alpha rays indicate that some of the alpha particles must suffer a deflexion of more than a right angle at a single encounter.... It will be shown that the main deductions from the theory are independent of whether the central charge is supposed to be positive or negative". Although the theory of electromagnetic scattering is in first approximation independent of the relative sign of the colliding particles, in the case where projectile antiprotons are shot against a wall of solid matter the Rutherford diffuse reflection mechanism competes with the annihilation process. So it is not obvious at all that a relevant part of an antiproton beam...

  9. Reflection, Interrogatory, Provocation

    International Nuclear Information System (INIS)

    Carnes, W.E.

    2016-01-01

    This invited paper advances a framing context for considering next steps in HOF and organizational culture in light of the presentations and discussions that occur during the conference. Many of the contributions during the conference will represent results of scholarly research, structured investigations, or formal organizational improvement efforts. This contribution is intended as informal reflection by a 40-year nuclear veteran on themes from other presentations considering questions such as: ''Where do we think we are?, Are we better off as an industry based on what we have done?, Where do we think we need to go?, What do we think we need to do?, and, Why do we think these things?'' Our coming together on this occasion marks 30 years since the publication of INSAG-l. As we reflect on the past, perhaps it is time to pose a series of questions. Are we sustainers of a mature technology that is in some places declining and being replaced by other energy sources? If we consider nuclear a mature technology, should we focus most on operational excellence with renewed attention to managing the unexpected? Or, is innovation still a vital part of our industry?

  10. Cohort profile

    DEFF Research Database (Denmark)

    Kreiberg, Michael; Bandak, Mikkel; Lauritsen, Jakob

    2018-01-01

    The cohort was set up in order to analyze late effects in long-term testicular cancer survivors (TCS) and to contribute to the design of future follow-up programs addressing and potentially preventing late effects. Data for this cross-sectional study were collected between January 1, 2014, and De...

  11. Rational Design and Multibiological Profiling of Novel Donepezil-Trolox Hybrids against Alzheimer's Disease, with Cholinergic, Antioxidant, Neuroprotective, and Cognition Enhancing Properties.

    Science.gov (United States)

    Cai, Pei; Fang, Si-Qiang; Yang, Xue-Lian; Wu, Jia-Jia; Liu, Qiao-Hong; Hong, Hao; Wang, Xiao-Bing; Kong, Ling-Yi

    2017-11-15

    A novel series of donepezil-trolox hybrids were designed, synthesized, and evaluated as multifunctional ligands against Alzheimer's disease (AD). Biological assays showed that these derivatives possessed moderate to good inhibitory activities against acetylcholinesterase (AChE) and monoamine oxidase B (MAO-B) as well as remarkable antioxidant effects. The optimal compound 6d exhibited balanced functions with good inhibition against hAChE (IC 50 = 0.54 μM) and hMAO-B (IC 50 = 4.3 μM), significant antioxidant activity (41.33 μM IC 50 by DPPH method, 1.72 and 1.79 trolox equivalent by ABTS and ORAC methods), excellent copper chelation, and Aβ 1-42 aggregation inhibition effect. Furthermore, cellular tests indicated that 6d has very low toxicity and is capable of combating oxidative toxin (H 2 O 2 , rotenone, and oligomycin-A) induced neurotoxicity. Most importantly, oral administration of 6d demonstrated notable improvements on cognition and spatial memory against scopolamine-induced acute memory deficit as well as d-galactose (d-gal) and AlCl 3 induced chronic oxidative stress in a mouse model without acute toxicity and hepatotoxicity. In summary, both in vitro and in vivo results suggested that 6d is a valuable candidate for the development of a safe and effective anti-Alzheimer's drug.

  12. Video Design Games

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Christensen, Kasper Skov; Iversen, Ole Sejer

    We introduce Video Design Games to train educators in teaching design. The Video Design Game is a workshop format consisting of three rounds in which participants observe, reflect and generalize based on video snippets from their own practice. The paper reports on a Video Design Game workshop...... in which 25 educators as part of a digital fabrication and design program were able to critically reflect on their teaching practice....

  13. Reflection and Non-Reflection of Particle Wavepackets

    Science.gov (United States)

    Cox, Timothy; Lekner, John

    2008-01-01

    Exact closed-form solutions of the time-dependent Schrodinger equation are obtained, describing the propagation of wavepackets in the neighbourhood of a potential. Examples given include zero reflection, total reflection and partial reflection of the wavepacket, for the sech[superscript 2]x/a, 1/x[superscript 2] and delta(x) potentials,…

  14. Sensitivity of Ocean Reflectance Inversion Models for Identifying and Discriminating Between Phytoplankton Functional Groups

    Science.gov (United States)

    Werdell, P. Jeremy; Ooesler, Collin S.

    2012-01-01

    The daily, synoptic images provided by satellite ocean color instruments provide viable data streams for observing changes in the biogeochemistrY of marine ecosystems. Ocean reflectance inversion models (ORMs) provide a common mechanism for inverting the "color" of the water observed a satellite into marine inherent optical properties (lOPs) through a combination of empiricism and radiative transfer theory. lOPs, namely the spectral absorption and scattering characteristics of ocean water and its dissolved and particulate constituents, describe the contents of the upper ocean, information critical for furthering scientific understanding of biogeochemical oceanic processes. Many recent studies inferred marine particle sizes and discriminated between phytoplankton functional groups using remotely-sensed lOPs. While all demonstrated the viability of their approaches, few described the vertical distributions of the water column constituents under consideration and, thus, failed to report the biophysical conditions under which their model performed (e.g., the depth and thickness of the phytoplankton bloom(s)). We developed an ORM to remotely identifY Noctiluca miliaris and other phytoplankton functional types using satellite ocean color data records collected in the northern Arabian Sea. Here, we present results from analyses designed to evaluate the applicability and sensitivity of the ORM to varied biophysical conditions. Specifically, we: (1) synthesized a series of vertical profiles of spectral inherent optical properties that represent a wide variety of bio-optical conditions for the northern Arabian Sea under aN Miliaris bloom; (2) generated spectral remote-sensing reflectances from these profiles using Hydrolight; and, (3) applied the ORM to the synthesized reflectances to estimate the relative concentrations of diatoms and N Miliaris for each example. By comparing the estimates from the inversion model to those from synthesized vertical profiles, we were able to

  15. The Reflective Methodologists

    DEFF Research Database (Denmark)

    Kjær, Bjørg

    2013-01-01

    In recent years, a focus on inclusion and vulnerable children has reignited discussions about the quality of pedagogical work. It has also initiated processes of change that have challenged the Danish kindergarten tradition and the identity of the pedagogue in a number of different ways. In this ......In recent years, a focus on inclusion and vulnerable children has reignited discussions about the quality of pedagogical work. It has also initiated processes of change that have challenged the Danish kindergarten tradition and the identity of the pedagogue in a number of different ways...... in which the practical sense and tacit knowledge are related to questions of power and social actors’ strategies for positioning themselves within a social space. This demands a particular focus on the historical effect of the concept of ‘the reflective practitioner’ as a symbolic marker of identity...

  16. Reflections on Conformal Spectra

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    We use modular invariance and crossing symmetry of conformal field theory to reveal approximate reflection symmetries in the spectral decompositions of the partition function in two dimensions in the limit of large central charge and of the four-point function in any dimension in the limit of large scaling dimensions Δ0 of external operators. We use these symmetries to motivate universal upper bounds on the spectrum and the operator product expansion coefficients, which we then derive by independent techniques. Some of the bounds for four-point functions are valid for finite Δ0 as well as for large Δ0. We discuss a similar symmetry in a large spacetime dimension limit. Finally, we comment on the analogue of the Cardy formula and sparse light spectrum condition for the four-point function. (based on 1510.08772 with Kim & Ooguri). This seminar will be given via videolink

  17. Reflections on academic video

    Directory of Open Access Journals (Sweden)

    Thommy Eriksson

    2012-11-01

    Full Text Available As academics we study, research and teach audiovisual media, yet rarely disseminate and mediate through it. Today, developments in production technologies have enabled academic researchers to create videos and mediate audiovisually. In academia it is taken for granted that everyone can write a text. Is it now time to assume that everyone can make a video essay? Using the online journal of academic videos Audiovisual Thinking and the videos published in it as a case study, this article seeks to reflect on the emergence and legacy of academic audiovisual dissemination. Anchoring academic video and audiovisual dissemination of knowledge in two critical traditions, documentary theory and semiotics, we will argue that academic video is in fact already present in a variety of academic disciplines, and that academic audiovisual essays are bringing trends and developments that have long been part of academic discourse to their logical conclusion.

  18. Reflections on Student Persistence

    Directory of Open Access Journals (Sweden)

    Vincent Tinto

    2017-07-01

    Full Text Available The Feature for this issue Reflections on Student Persistence has been prepared by Professor Vincent Tinto, Distinguished University Professor Emeritus at Syracuse University, United States of America (USA and a longtime friend and supporter of STARS. Vincent explores the case for motivation to be considered as a significant aspect of the tertiary student psyche by drawing on theoretical frameworks, research and practical experiences related to the issue. He synthesises this extensive, detailed, rich but often somewhat impenetrable data into a trilogy of clear and credible key dimensions of the motivation construct student self efficacy, sense of belonging and perceived value of the curriculum. This interpretation of the literature is a personal but informed reflection and is a timely piece which highlights the breadth and profundity of the presentations at this year's conference in Adelaide, Australia where students in all their diversity are central to our focus on enhancing the student experience. In this opening article, Vincent refers directly to the STARS papers selected for this Conference issue of the Journal which also address the importance of student persistence, self-efficacy and building the sense of belonging within their own institutional communities (Fernandes, Ford, Rayner & Pretorius; Kahu, Nelson, & Picton; McFarlane, Spes-Skrbis & Taib; Naylor; Smallhorn. Echoing his position on social justice and his advocacy for underserved students, Vincent reminds us that educational equity gaps still exist, and he encourages us to see the issue of persistence through the eyes of the students to support their perseverance and completion and thereby help reduce educational disadvantage.

  19. Reflective Practices for Teacher Education

    Directory of Open Access Journals (Sweden)

    Paulus Kuswandono

    2017-01-01

    Full Text Available Studies on reflective practice in teacher education are increasingly getting more attention at least in the last 2 decades. This article discusses concepts of reflection and how it is implemented in educating pre-service teachers on their early stage of professional learning. The purposes of doing the reflection for pre-service teachers are not only for illuminating their professional learning experiences, but also to critically reflect their vocation as teachers, including the values which may be dictated to them through rigid regulations. Reflection in teacher education is crucial as it connects well with learning in that learners use reflection to exercise their mind and to evaluate their learning experiences. Besides, this article also highlights some perceived difficulties to implement reflective practice, as well as ways how to promote reflection.   DOI: https://doi.org/10.24071/llt.2012.150102

  20. Guided and Unguided Student Reflections

    OpenAIRE

    Matheson, Amanda; Wood, Laura; Franklin, Scott V.

    2017-01-01

    Self-reflection is important metacognitive skill, enabling students to build coherence into their learning and embed content in a broader context. While various pedagogical techniques exist to encourage student reflection, little research has examined the differences between formally guided, partially guided and unguided reflections. This study focuses on student responses to online Guided Reflection Forms (GRFs) from students in a first-semester non-physics class and, separately, a sophomore...

  1. Students’ Learning through Reflective Journaling

    OpenAIRE

    Alvyda Liuolienė; Regina Metiūnienė

    2011-01-01

    The aim of the article is to get acquainted with the types of journals used in education to help students to learn. The paper presents some ways of fostering student’s learning through reflective journaling. It also describes the key aspects of a new method ARRIVE cycle in connection with teachers preparation to use reflective journals in a classroom. The article also presents self-assessment in reflective journaling and students’ need to self-evaluate their learning process. Reflective journ...

  2. Reflective and transflective liquid crystal displays

    Science.gov (United States)

    Zhou, Fushan

    Recently transflective liquid crystal displays (LCD) received a lot of attention. A transflective display has a transmissive mode and a reflective mode. It combines the high contrast, high brightness of the transmissive mode with energy-saving of reflective mode and has good performance in various illumination conditions. However, state-of-the-art transflective displays have problems such as different electro-optical properties, difficulty in compatibility and optimization of both modes, low efficiency of light utilization, and complexity in structure. This dissertation focuses on finding new designs of transflective displays that address those problems. One way to do this is to study film compensation of LCD. We first studied film compensation of bistable twisted nematic (BTN) LCD. Starting form the reduced (3x3) Mueller matrices, we derived and simplified the conditions that film compensated BTN can be optimized. Based on these relations, electro-optical properties of some particular configurations, and designs of transflective BTN with high brightness and contrast were given. To confirm and get a better understanding of the results, we use the Poincare sphere to analyze film compensated BTN. The key to this approach is the existence of "fixed points". Compared with the matrix approach, this approach is more simple, elegant, and efficient. We then generalized the Poincare sphere approach to a universal approach of LCD. We applied the universal approach to film compensation of ECB and IPS, and the design of achromatic birefringent filters. We also give two more new designs of transflective displays. In the first design, a dichroic mirror is used to split the visible spectrum into two parts used in transmissive and reflective modes, respectively. Both modes can be optimized. It has a simple structure and good light utilization. A design for a full-color transflective display with good performance is also given. In the second design, each pixel is divided into two

  3. Reflection in Russian Educational Psychology.

    Science.gov (United States)

    Nelissen, Jo M. C.; Tomic, Welko

    This paper discusses the cultural-historical school founded by Vygotsky, Luria, and Leontiev as the theoretical background of Russian educational psychologists who have been studying how children learn to reflect. Two approaches to reflection are examined within the cultural-historical tradition: first, reflection--like other higher psychological…

  4. Reflective Practice: Origins and Interpretations

    Science.gov (United States)

    Reynolds, Michael

    2011-01-01

    The idea of reflection is central to the theory and practice of learning--especially learning which is grounded in past or current experience. This paper proposes a working definition of reflection and reviews its origins and recent developments. The author also provides an account of "critical reflection", including its rationale and…

  5. Design Diversity

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2014-01-01

    . The exhibition is oriented along disciplines such as inclusive design, which calls for products to be designed in such a way that they are equally attractive to people of all ages. Despite the existence of innovative design concepts, the number of well-designed products available on the market is low. While many...... courageous projects for "best agers" and "golden agers" never get beyond the prototype stage, products that paint a more "beige" picture of everyday life can be found in large numbers. This fact raises some key questions: Does the existing product culture reflect today's views on old age? Do contemporary...

  6. Design Anthropology

    DEFF Research Database (Denmark)

    This edited volume provides an introduction to the emerging field of design anthropology from the point of view of anthropologists engaging in its development. Contributors include young anthropologists with experience in the field and leading theoreticians, who combine to articulate the specific...... style of knowing involved in doing design anthropology. So far design anthropology has been developed mostly in the practice of industry and the public sector, in particular in Scandinavia and the US, and the sustained academic reflection to support this practice is still in its early stages. This book...... will contribute to this theoretical reflection and provide a reference for practitioners, teachers and students of anthropology, as well as design and innovation....

  7. High resolution reflection seismic mapping of shallow coal seams

    CSIR Research Space (South Africa)

    Mngadi, SB

    2013-10-01

    Full Text Available the extent of the mine workings. Two 94 m profiles (tied to boreholes) were surveyed using a sledgehammer source. Processing was optimized to image the shallow reflections. The refraction seismic models and stacked time sections were compared and integrated...

  8. Designed communities?

    DEFF Research Database (Denmark)

    Stender, Marie

    2013-01-01

    In current residential spaces there seem to be an increasing emphasis on small-scale communities. A number of new, high profiled residential complexes thus seek to promote new ways of social living by rethinking architectural design, typologies and concepts. In this paper I explore the emergence ...

  9. Cohort profile

    DEFF Research Database (Denmark)

    Tollånes, Mette C; Strandberg-Larsen, Katrine; Forthun, Ingeborg

    2016-01-01

    PURPOSE: The purpose of MOthers and BAbies in Norway and Denmark cerebral palsy (MOBAND-CP) was to study CP aetiology in a prospective design. PARTICIPANTS: MOBAND-CP is a cohort of more than 210 000 children, created as a collaboration between the world's two largest pregnancy cohorts-the Norweg......PURPOSE: The purpose of MOthers and BAbies in Norway and Denmark cerebral palsy (MOBAND-CP) was to study CP aetiology in a prospective design. PARTICIPANTS: MOBAND-CP is a cohort of more than 210 000 children, created as a collaboration between the world's two largest pregnancy cohorts......-the Norwegian Mother and Child Cohort study (MoBa) and the Danish National Birth Cohort. MOBAND-CP includes maternal interview/questionnaire data collected during pregnancy and follow-up, plus linked information from national health registries. FINDINGS TO DATE: Initial harmonisation of data from the 2 cohorts...... has created 140 variables for children and their mothers. In the MOBAND-CP cohort, 438 children with CP have been identified through record linkage with validated national registries, providing by far the largest such sample with prospectively collected detailed pregnancy data. Several studies...

  10. Manipulating Acoustic Wavefront by Inhomogeneous Impedance and Steerable Extraordinary Reflection

    Science.gov (United States)

    Zhao, Jiajun; Li, Baowen; Chen, Zhining; Qiu, Cheng-Wei

    2013-08-01

    We unveil the connection between the acoustic impedance along a flat surface and the reflected acoustic wavefront, in order to empower a wide wariety of novel applications in acoustic community. Our designed flat surface can generate double reflections: the ordinary reflection and the extraordinary one whose wavefront is manipulated by the proposed impedance-governed generalized Snell's law of reflection (IGSL). IGSL is based on Green's function and integral equation, instead of Fermat's principle for optical wavefront manipulation. Remarkably, via the adjustment of the designed specific acoustic impedance, extraordinary reflection can be steered for unprecedented acoustic wavefront while that ordinary reflection can be surprisingly switched on or off. The realization of the complex discontinuity of the impedance surface has been proposed using Helmholtz resonators.

  11. 微型投影机中针对多色LED光源的反射环设计%The Design of Reflection Ring for Multi-Color LEDs in Pico Projector

    Institute of Scientific and Technical Information of China (English)

    王飞霞; 缪华; 张宇宁; 王婕妤; 李晓华

    2015-01-01

    随着投影技术和便携式设备的发展,希望得到具有高亮度、小体积光源模块的微型投影机。研究并分析了球形反射环、绕抛物线过顶点的对称轴旋转得到的双抛物面反射环和绕过抛物线焦点并与顶点和焦点连线垂直的直线旋转得到的双抛物面反射环等三种反射环,来提高多色LED封装的亮度。三种反射环中每个LED的输出光线将返回到与其成中心对称,轴对称或自身所在的位置,系统的亮度可提高0.5倍以上,并有利于减小光源模块的体积。%With the development of projection technology and portable devices,people want to get pico projector with light source module which is high brightness and small size. Three reflection rings were researched and ana⁃lyzed to increase the brightness of multi-color LED packages. They were spherical reflection ring,dual parabolic re⁃flection ring which were rotated around the symmetry axis of parabola and dual parabolic reflection ring which were rotated around the line that passed the focus and were perpendicular to the symmetry axis of parabola. The output from each LED was recycled back into the place where was central symmetric,axial symmetric or itself. These re⁃flection rings can help to improve the brightness of the system more than 0.5 times and reduce the volume of the light source module.

  12. Reflective writing: the student nurse's perspective on reflective writing and poetry writing.

    Science.gov (United States)

    Coleman, Dawn; Willis, Diane S

    2015-07-01

    Reflective writing is a mandatory part of nurse education but how students develop their skills and use reflection as part of their experiential learning remains relatively unknown. Understanding reflective writing in all forms from the perspective of a student nurse is therefore important. To explore the use of reflective writing and the use of poetry in pre-registered nursing students. A qualitative design was employed to explore reflective writing in pre-registered nursing students. A small university in Scotland. BSc (Hons) Adult and Mental Health Pre-registration Student Nurses. Two focus groups were conducted with 10 student nurses during March 2012. Data was analysed thematically using the framework of McCarthy (1999). Students found the process of reflective writing daunting but valued it over time. Current educational methods, such as assessing reflective accounts, often lead to the 'narrative' being watered down and the student feeling judged. Despite this, reflection made students feel responsible for their own learning and research on the topic. Some students felt the use of models of reflection constricting, whilst poetry freed up their expression allowing them to demonstrate the compassion for their patient under their care. Poetry writing gives students the opportunity for freedom of expression, personal satisfaction and a closer connection with their patients, which the more formal approach to reflective writing did not offer. There is a need for students to have a safe and supportive forum in which to express and have their experiences acknowledged without the fear of being judged. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  13. Bacterial profiles of saliva in relation to diet, lifestyle factors, and socioeconomic status

    Directory of Open Access Journals (Sweden)

    Daniel Belstrøm

    2014-04-01

    Full Text Available Background and objective: The bacterial profile of saliva is composed of bacteria from different oral surfaces. The objective of this study was to determine whether different diet intake, lifestyle, or socioeconomic status is associated with characteristic bacterial saliva profiles. Design: Stimulated saliva samples from 292 participants with low levels of dental caries and periodontitis, enrolled in the Danish Health Examination Survey (DANHES, were analyzed for the presence of approximately 300 bacterial species by means of the Human Oral Microbe Identification Microarray (HOMIM. Using presence and levels (mean HOMIM-value of bacterial probes as endpoints, the influence of diet intake, lifestyle, and socioeconomic status on the bacterial saliva profile was analyzed by Mann–Whitney tests with Benjamini–Hochberg's correction for multiple comparisons and principal component analysis. Results: Targets for 131 different probes were identified in 292 samples, with Streptococcus and Veillonella being the most predominant genera identified. Two bacterial taxa (Streptococcus sobrinus and Eubacterium [11][G-3] brachy were more associated with smokers than non-smokers (adjusted p-value<0.01. Stratification of the group based on extreme ends of the parameters age, gender, alcohol consumption, body mass index (BMI, and diet intake had no statistical influence on the composition of the bacterial profile of saliva. Conversely, differences in socioeconomic status were reflected by the bacterial profiles of saliva. Conclusions: The bacterial profile of saliva seems independent of diet intake, but influenced by smoking and maybe socioeconomic status.

  14. Formation of Mach angle profiles during wet etching of silica and silicon nitride materials

    Energy Technology Data Exchange (ETDEWEB)

    Ghulinyan, M., E-mail: ghulinyan@fbk.eu [Centre for Materials and Microsystems, Fondazione Bruno Kessler, I-38123 Povo (Italy); Bernard, M.; Bartali, R. [Centre for Materials and Microsystems, Fondazione Bruno Kessler, I-38123 Povo (Italy); Deptartment of Physics, University of Trento, I-38123 Povo (Italy); Pucker, G. [Centre for Materials and Microsystems, Fondazione Bruno Kessler, I-38123 Povo (Italy)

    2015-12-30

    Highlights: • Photoresist adhesion induces the formation of complex etch profiles in dielectrics. • Hydrofluoric acid etching of silica glass and silicon nitride materials was studied. • The phenomenon has been modeled in analogy with sonic boom propagation. • The material etch rate and resist adhesion/erosion define the final profile. - Abstract: In integrated circuit technology peeling of masking photoresist films is a major drawback during the long-timed wet etching of materials. It causes an undesired film underetching, which is often accompanied by a formation of complex etch profiles. Here we report on a detailed study of wedge-shaped profile formation in a series of silicon oxide, silicon oxynitride and silicon nitride materials during wet etching in a buffered hydrofluoric acid (BHF) solution. The shape of etched profiles reflects the time-dependent adhesion properties of the photoresist to a particular material and can be perfectly circular, purely linear or a combination of both, separated by a knee feature. Starting from a formal analogy between the sonic boom propagation and the wet underetching process, we model the wedge formation mechanism analytically. This model predicts the final form of the profile as a function of time and fits the experimental data perfectly. We discuss how this knowledge can be extended to the design and the realization of optical components such as highly efficient etch-less vertical tapers for passive silicon photonics.

  15. Intimate Design

    DEFF Research Database (Denmark)

    Søndergaard, Marie Louise Juul

    2017-01-01

    I examine how design can reflect on and critically discuss political and cultural issues of intimate technologies, such as gender and identity, embodied experiences, privacy, intimate data and sharing. In presenting my PhD project's background, research objectives, hypothesis and methodological...

  16. Doping profile measurement on textured silicon surface

    Science.gov (United States)

    Essa, Zahi; Taleb, Nadjib; Sermage, Bernard; Broussillou, Cédric; Bazer-Bachi, Barbara; Quillec, Maurice

    2018-04-01

    In crystalline silicon solar cells, the front surface is textured in order to lower the reflection of the incident light and increase the efficiency of the cell. This texturing whose dimensions are a few micrometers wide and high, often makes it difficult to determine the doping profile measurement. We have measured by secondary ion mass spectrometry (SIMS) and electrochemical capacitance voltage profiling the doping profile of implanted phosphorus in alkaline textured and in polished monocrystalline silicon wafers. The paper shows that SIMS gives accurate results provided the primary ion impact angle is small enough. Moreover, the comparison between these two techniques gives an estimation of the concentration of electrically inactive phosphorus atoms.

  17. Teachers’ way of reflecting

    DEFF Research Database (Denmark)

    Lund, Lea

    2016-01-01

    This paper contributes to insights on teachers’ thinking and practice by building partly on the large amount of prior research in the field of continuing professional development (in line with ISATT), and partly on examples from an empirical small-scale study executed in Denmark. The purpose of t......’ reflections on practice. Based on this model, the paper provides a proposal regarding how to work with teachers’ professional development and learning processes. Educational implications and future research directions are discussed.......This paper contributes to insights on teachers’ thinking and practice by building partly on the large amount of prior research in the field of continuing professional development (in line with ISATT), and partly on examples from an empirical small-scale study executed in Denmark. The purpose...... of the Danish study was to investigate and understand teachers’ classroom experiences using Fenstermacher’s approach to develop a practical argument, as these classroom experiences are regarded as a potential source of learning for teachers. A three-level scale model from the study describes the teach-ers...

  18. Functional Reflective Polarizer for Augmented Reality and Color Vision Deficiency

    Science.gov (United States)

    2016-03-03

    augment reality system is relatively high as compared to a polarizing beam splitter or a conventional reflective polarizer. Such a functional reflective...brightness of the display [7]. A key component for polarization management is polarizing beam splitter (PBS). Even though the PBS has exceptional...polarizer that can be incorporated into a compact augmented reality system. The design principle of the functional reflective polarizer is explained and

  19. Reflective journal writing: how it promotes reflective thinking in clinical nursing education: a students' perspective.

    Science.gov (United States)

    Kok, J; Chabeli, M M

    2002-08-01

    According to the outcomes-based education and training system of education (OBET) in the country and the South African Nursing Council, education should focus on "creating" reflective learners and practitioners. This article seeks to determine the effectiveness of reflective journal writing in promoting the reflective thinking of learners in clinical nursing education and to validate the guidelines described in a bigger study on how to facilitate reflective thinking using reflective journal writing. A qualitative, contextual, explorative, descriptive research design was used to determine the learners' perceptions on whether reflective journal writing did promote their higher-level thinking skills during the six-month placement in a psychiatric clinical practice using the reflective diaries. From a population of seventeen fourth-year students, six volunteered to participate in a focus group interview. The data was analysed by means of the descriptive method of open coding of Tesch (in Creswell, 1994:154-156). Positive and negative results from the perceptions of the participants and a literature review served as a basis for deducing and describing guidelines for the effective use of reflective journal writing in promoting reflective thinking in clinical nursing education. The positive perception was the development of problem-solving skills attained through reflection by using analytical critical thinking, synthesis and the evaluation of situations. Self-evaluation leading to intellectual growth and self-awareness indicated a positive perception. Negative perceptions were that reflective journal writing is time consuming, content based with a lack of clear expectations from the teacher, and distrust of students about the information written. Guba's model of ensuring trustworthiness in qualitative research as described in Krefting (1991:215-222) was employed. It is concluded that reflective journal writing in clinical nursing education does promote reflective

  20. Petroleum software profiles

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    A profile of twenty-two software packages designed for petroleum exploration and production was provided. Some focussed on the oil and gas engineering industry, and others on mapping systems containing well history files and well data summaries. Still other programs provided accounting systems designed to address the complexities of the oil and gas industry. The software packages reviewed were developed by some of the best-known groups involved in software development for the oil and gas industry, including among others, Geoquest, the Can Tek Group, Applied Terravision Systems Inc., Neotechnology Consultants Ltd., (12) OGCI Software Inc., Oracle Energy, Production Revenue Information Systems Management, Virtual Computing Services Ltd., and geoLogic Systems Ltd