WorldWideScience

Sample records for products office furniture

  1. 41 CFR 109-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

  2. 41 CFR 101-25.104 - Acquisition of office furniture and office machines.

    Science.gov (United States)

    2010-07-01

    ... furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines... machines. The acquisition of new items shall be limited to those requirements which are considered...

  3. Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Hasan Alizadeh

    2014-11-01

    Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

  4. Factors influencing the, selection of state office furniture

    Science.gov (United States)

    R. Bruce Anderson; R. Bruce Anderson

    1973-01-01

    Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

  5. OFFICE FURNITURE DESIGN SET: SINTEX (1965-1977

    Directory of Open Access Journals (Sweden)

    Aida Puente Toraño

    2013-07-01

    Full Text Available Litton Industries decided to establish one of its divisions in Northern Spain in 1965 called Litton-Cole. They chose Asturias to set up a factory intended to manufacture office furniture with a metallic component. The region had the potential to develop this kind of product due to its industrial base. It was easy to be provided with materials like steel, but above all a specialized workforce from Asturias’ Arms Industry. In the context of Spanish sixties José Antonio Menéndez Hevia was in charge of designing several banks and other public commercial establishments. Due to his connection with the Asturian banking sector, he had the opportunity to design office furniture set for Cole Steel. Cole Steel was the commercial name for the Asturian factory. Menéndez Hevia designed a very thorough set with almost twenty possible combinations that was commercialized under the name of Sintex. The series was successful on a national scale which was aimed at furnishing bank branch offices, but it was also exported to countries like Italy. Thousands of units were sold as part of one of the few Spanish design products manufactured in series at that time. The factory was closed in 1977, but in the general background of Spanish industrial design this series was forgotten, being part of our usual anonymous design history.

  6. Factors influencing selection of office furniture by corporations and universities

    Science.gov (United States)

    R. Bruce Anderson

    1976-01-01

    Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

  7. The green marketing of modern office furniture

    Institute of Scientific and Technical Information of China (English)

    林凡青

    2015-01-01

    Green marketing is referred to as the mainstream of marketing in the 21st century, it mainly discusses the enterprise how to deal with the growing consumer demand for environmentally friendly products. Green marketing is an extension of the traditional marketing and the development, in the traditional marketing concept, through the coordination of enterprises, customers, competitors to gain maximum profits, and green marketing is more than the ecological environment factors included. Furniture enterprises through to carry out green marketing strategy, sales of green furniture products, the corresponding measures to guide the sustainable consumption and satisfy the consumer, to achieve economic interests, the interests of the consumers, the environment is unified.

  8. Removal or transport of office furniture and PCs

    CERN Multimedia

    TS Department

    2008-01-01

    The TS/FM Group wishes to remind users that requests for the removal or transport of office furniture must be made using the EDH ‘Transport request’ form. Please select the "Removals" category from the drop-down menu to indicate the nature of the request. Requests for the transport of PCs from your office to Bldg. 513 or back must also be made using the EDH ‘Transport request’ form. In this case select the "PC transport" category from the drop-down menu. TS/FM Group Tel. 160239

  9. Assessment of office furniture and knowledge of work ergonomics ...

    African Journals Online (AJOL)

    Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

  10. The Influence of Office Furniture on the Air Movement in a Mixing Ventilated Room

    DEFF Research Database (Denmark)

    Nielsen, June Richther

    Isothermal and thermal experiments and simulations form the basis of the investigations in this thesis. It is mainly the isothermal case that is studied. The examinations concern how normal office furniture influences the air movements in a mixing ventilated room. Especially, the jet under...... whereas the two last-mentioned inlets are simulated 3-dimensional. In the isothermal simulations a furniture volume is used to represent the physical furniture and in the thermal case a furniture volume together with a volume source is used. The investigations of the isothermal experiments and simulations...... by the thermal forces in the room. The thermal case needs more investigation because only two experiments and the corresponding simulations are the base of the investigations....

  11. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  12. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  13. Technology of Furniture Production

    OpenAIRE

    Danilova, Kseniia

    2016-01-01

    Manufacturing of furniture is one of the main processes of timber utilization. Furniture of Timberica Oy brand is made by special technology which does not allow use aggressive chemicals that can be harmful to humans, in wood processing. The furniture is made of Karelian "white" pine. Company's headquarters are located in Finland, its specialists improve and carefully controlled manufacturing process at the furniture factory in Karelia. Timberica Oy has produced furniture since 1998. They...

  14. Proposal for the Award of a Blanket Order for the Supply of Office Furniture

    CERN Document Server

    1999-01-01

    This document concerns the award of a blanket order for the supply of office furniture. Following a market survey carried out among 87 firms in seventeen Member States, a call for tenders (IT-2590/SPL) was sent on 5 November 1998 to nine firms in four Member States. By the closing date, CERN had received seven tenders. The Finance Committee is invited to agree to the negotiation of a contract for the supply of office furniture with the company A+Z Bürosysteme (DE), the lowest bidder complying with the specification, up to a total amount of 1 600 000 Swiss francs, not subject to revision until 30 March 2000, for an initial period of three years, with an option to renew the contract for two further one-year periods. A+Z Bürosysteme has declared the following origin of the furniture covered by this adjudication proposal: DE - 90% and CH - 10%.

  15. Sustainable Furniture that Grows with End-Users

    NARCIS (Netherlands)

    Bosch, T.; Verploegen, K.; Grösser, S.N.; Rhijn, G. van

    2017-01-01

    Economically and environmentally it might be more responsible or even feasible to combine products and services to elongate product lifetime. Gispen, a major office furniture producer in the Netherlands, has embraced circular economic principles to create new business, extend product life time and

  16. Jepara Indonesia Furniture

    OpenAIRE

    romanzick

    2016-01-01

    Jepara Indonesia Furniture A wide choice of Indonesian furniture companies provide free business listings to all types of furniture also for outlets and stores. Each section is accessible that contains a comprehensive list of our range of furniture details information and full campaign. We provided a platform create various products along with featured inspiration section related products, services, accessories. Indonesia Furniture Teak Garden Furniture It is bringing customers distinctive as...

  17. Flexibility in Modular Furniture Systems in Open Offices, Famagusta, North Cyprus

    OpenAIRE

    E. Farjami; La. Mohammadzadeh Afshar; Li. Mohammadzade Afshar; A. Taran

    2014-01-01

    Nowadays, flexibility introduced as a modern technology in furniture systems especially in interior planning design. According to results, the most important impact of these systems can be seen on open plan design that makes workspaces comfortable and increases the productivity of employees besides making good relationship between them. Briefly, there are some factors along with new systems in furniture design help create inappropriate space to make working better and easier while it has modu...

  18. Intensity of rivalry in Czech furniture production industry

    OpenAIRE

    Lucie Špačková; Pavel Žufan

    2012-01-01

    The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local) demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of ...

  19. Intensity of rivalry in Czech furniture production industry

    Directory of Open Access Journals (Sweden)

    Lucie Špačková

    2012-01-01

    Full Text Available The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of rivalry represent particular influences defined by Porter in his model of five competitive forces. Main influences identified by Porter, which are increasing the intensity of competition in the furniture production industry in the Czech Republic include low industry concentration, relatively low diversity of competitors, decline in sales, low (or none switching costs, and existing excessive capacity within the industry. Further development will be most significantly influenced by a growing concentration of the bigger Czech producers on domestic market and overall economic development.

  20. 41 CFR 101-25.404 - Furniture.

    Science.gov (United States)

    2010-07-01

    ...-25.404 Furniture. Furniture (office, household and quarters, and institutional) shall not be replaced unless the estimated cost of repair or rehabilitation (based on GSA term contracts), including any... which rehabilitation of the furniture at 75 percent or less of the cost of a new item would not extend...

  1. Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

    OpenAIRE

    DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

    2014-01-01

    The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

  2. Changes and development of product line : Case: P. Rotola-Pukkila Oy's products, furniture trends and competitors

    OpenAIRE

    Rotola-Pukkila, Ida

    2016-01-01

    The purpose of this thesis is to study what kinds of changes and developments have been done in furniture manufacturer P. Rotola-Pukkila Oy’s Timantti and Laatupaneeli products and colour options between the years 1970−2016. Another objective is to study the trends on furniture and interior design field, as well as to study how the company’s products compete on the market. Concepts related to company’s history, products, collections and colour options as well as the history of furniture f...

  3. The Influence of Furniture on Air Velocity in a Room

    DEFF Research Database (Denmark)

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room. Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set......-up is simulated with one of the inlets where a volume resistance represents the furniture....

  4. Progressive technologies in furniture design

    OpenAIRE

    Šebková, Martina

    2014-01-01

    Šebková, M. Progressive technologies in furniture design. Diploma thesis, Brno, Mendel University in Brno, 2014 Diploma thesis 'Progressive technologies in furniture design' is focused on the use of modern technologies in furniture production. The theoretical part explains the basic terms, technology and material options. It focuses mainly on the production of 3D printed furniture and possibilities of virtual testing, measurements, scanning and rapid prototyping. Practical part of diploma the...

  5. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    OpenAIRE

    Ika Rinawati Dyah; Sriyanto; Puspita Sari Diana; Cantya Prayodha Andana

    2018-01-01

    Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical mater...

  6. Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

    Science.gov (United States)

    de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

    2012-01-01

    The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

  7. CEFTA Agreement and Opportunities for Wood Furniture Export of the Republic of Macedonia

    OpenAIRE

    Ilijana Petrovska; Živka Meloska; Krum Efremov; Kiril Postolov

    2016-01-01

    This paper is focused on business possibilities of CEFTA 2006 and its influence on export trend of wood furniture from the Republic of Macedonia. First, six categories of wood furniture export are analyzed such as: office furniture, kitchen furniture, bedroom furniture, living and dining room furniture, shop furniture and other furniture, presenting a positive trend in each category, except for living and dining room furniture. The total export of wood furniture shows a positive trend. The se...

  8. Transitioning Wood Furniture Products towards Sustainability

    OpenAIRE

    Lu, Lei; Zhang, WeiGuang; Zhang, WeiQing

    2008-01-01

    Wood Furniture Products (WFPs) play a significant role in both the global economy and the transition of society towards sustainability. This paper begins with a brief description of the industry and highlights the current challenges and compelling measures of WFPs from a systems perspective through the lens of the Framework for Strategic Sustainable Development (FSSD) and by applying backcasting from sustainability principles (SPs). An examination of the challenges and opportunities of WFPs i...

  9. The Influence of Furniture on Air Velocity in a Room:an isothermal case

    OpenAIRE

    Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

    1998-01-01

    Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room.Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set-up is simulated with one of the inlets where a volume resistance represents the furniture.

  10. The potential of Swedish furniture companies in Vietnam : How Vietnamese consumers perceive the product values of Swedish furniture

    OpenAIRE

    Dinh, Thi Phuong Lan; Karlsson, Jonas

    2012-01-01

    Introduction: Swedish furniture companies have been quite successful in many parts of the world recently, with IKEA being a famous example of that. Meanwhile, Vietnam has one of the fastest-growing economies in South East Asia. However, there has not been any Swedish furniture company established on the Vietnamese market so far. Therefore, it would be useful to see if the Vietnamese furniture consumers would appreciate Swedish furniture, in order to analyze whether Swedish furniture companies...

  11. Applications of Mechatronics in Seating Furniture

    Directory of Open Access Journals (Sweden)

    Hynek Maňák

    2014-01-01

    Full Text Available Mechatronics is gradually being used in different fields of the production process and final products. In the field of home seating furniture, it has not been formally declared as such yet. The purpose of further development of seating furniture is to improve its ergonomic parameters, to improve user comfort in controlling and using seating furniture or to provide new additional functions of seating furniture. Application of mechatronic principles can be presumed within the framework of this development. An analysis of the current state of reclining seating furniture, which uses mechanical and electromechanical positioning mechanisms, is conducted in order to formulate possible fields of applying mechatronics. The analysis defines individual ergonomic parameters which are influenced in reclining of seating furniture. This analysis is used as a basis for formulating a hypothesis describing potential development fields of applying mechatronics in home seating furniture.

  12. The Creation Of Furniture Products Design From Stem Waste Of Sugar Palm Tree (Arenga Pinnata

    Directory of Open Access Journals (Sweden)

    I Wayan Seriyoga Parta

    2017-11-01

    Full Text Available Sugar Palm tree (Arenga Pinnata is one of potential natural resources that can be used as a based material of furniture products. But, this sugar palm tree potential hasn’t exploited maximally and only throws away as a waste that contaminates the environment. On the other side, woods that have been used as based material of furniture products are getting rare and expensive. Based on that problem, this research is aimed to design new furniture products models that exploite the stem waste as a prominent based material.  This research uses experiment method with steps: 1 finding and formulating concepts of furniture products design creation based on analysis towards the stem waste of sugar palm tree characteristics; 2 implementing of finding concepts to become furniture products models from stem waste of sugar palm tree. As a result of the research, it is found “tube” concept and tatah carved concept as a right concept to be applied in creation of furniture products from stem waste of sugar palm tree. Implementing of “tube” concept and tatah carved concept is made successfully in shape of some furniture products design such as:  table model, chair model and wardrobe model. Realization of these designs has concerned with the use of sugar palm tree as a prominent based material. According to the result of evaluation, all of these designs are deserved to be made. So, it is concluded that to anticipate the qualified wood as a based material of furniture products, we can use stem waste of sugar palm tree as alternative based material. Pohon aren (Arenga Pinnata merupakan salah satu sumber daya alam yang potensial digunakan sebagai bahan baku produk mebel. Akan tetapi, potensi batang pohon aren itu belum dimanfaatkan secara maksimal dan hanya terbuang menjadi limbah yang mengotori lingkungan. Di sisi lain, kayu yang selama ini dimanfaatkan sebagai bahan baku produk mebel keberadaannya makin langka dan mahal. Bertolak dari permasalahan itu

  13. METHODS FOR DETERMINING THE AESTHETIC APPEAL OF FURNITURE

    Directory of Open Access Journals (Sweden)

    Mária Réka ANTAL

    2016-03-01

    Full Text Available The world of furniture market is getting more and more complex than it was before. In recent years the habits of buying furniture have changed. The fabrication of individual pieces of furniture is increasingly coming to the front. A personal contact is being established between the customer and the furniture, which is a relationship of one product to one customer. In order to satisfy the individual demands, higher prices and higher quality are needed. The competition is beginning at the market and emotion plays an important role in it. Therefore, functionality and aesthetic functions, determinative forms, fashionable style play a very important role in furniture design and production. Some methods are presented such as RMQD or FMEA used for determining aesthetics of furniture.

  14. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  15. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

    Science.gov (United States)

    González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

  16. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    International Nuclear Information System (INIS)

    González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-01-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  17. THE MARKETING SERVICES ON THE FURNITURE MARKET

    Directory of Open Access Journals (Sweden)

    Flaviu MEGHIŞAN

    2007-01-01

    Full Text Available The distribution of furniture has seen profound changes leading to accelerations of the dynamics of the competition environment, these changes being influenced, among other things, by the diversification of offer comprising new services. Today it seems essential to consider the distribution of furniture as an “industry that creates utility”. Indeed, the consumer is analyzed not only as a function of product characteristics, but as a set of utilities and advantages that distributions propose in their strategies of associated services. The services appear, in the same time, as variables which are applied by the distributor in his strategy to differentiate themselves and as utilities associated to the product, utilities which the consumer - as “problem-solver” - integrates in his decision making process. The consumer buys not just a simple product (furniture, but a global product which includes a sum of jointed attributes and utilities (proximity, product line, point of sale concept, information, warranty, etc.. This paper analyzes the services offer from the distribution of furniture as a method to solve the problems of furniture buyer. From this perspective the paper takes into consideration the various profiles of buying behavior, makes a critical analysis of the structure of services involved, defines a new structure of services based on the phases of buying behavior process.

  18. Marketing Hardwoods to Furniture Producers

    Science.gov (United States)

    Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1989-01-01

    This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

  19. Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level

    Directory of Open Access Journals (Sweden)

    Stasiak-Betlejewska Renata

    2015-12-01

    Full Text Available One of the most important factors determining the company‘s capacity to produce high quality products is the level of machinery operation effectiveness. Companies having modern machinery are characterized by high productivity. To obtain a high quality product, the equipment should be properly used, without any failure, which contributes significantly to the exploitation level increase. The modernity level and the exploitation effectiveness level for chosen machine producing furniture components in relation to the product quality level were analysed in the paper. As a result of the research findings analysis, proposals for corrective actions with regard to machinery maintenance and production processes were presented.

  20. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  1. Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed.

    Science.gov (United States)

    Heo, Hyeon Su; Park, Hyun Ju; Park, Young-Kwon; Ryu, Changkook; Suh, Dong Jin; Suh, Young-Woong; Yim, Jin-Heong; Kim, Seung-Soo

    2010-01-01

    The amount of waste furniture generated in Korea was over 2.4 million tons in the past 3 years, which can be used for renewable energy or fuel feedstock production. Fast pyrolysis is available for thermo-chemical conversion of the waste wood mostly into bio-oil. In this work, fast pyrolysis of waste furniture sawdust was investigated under various reaction conditions (pyrolysis temperature, particle size, feed rate and flow rate of fluidizing medium) in a fluidized-bed reactor. The optimal pyrolysis temperature for increased yields of bio-oil was 450 degrees C. Excessively smaller or larger feed size negatively affected the production of bio-oil. Higher flow and feeding rates were more effective for the production of bio-oil, but did not greatly affect the bio-oil yields within the tested ranges. The use of product gas as the fluidizing medium had a potential for increased bio-oil yields.

  2. assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

    Directory of Open Access Journals (Sweden)

    hejhar abbasi

    2016-12-01

    Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

  3. Development of Modular Outdoor Furniture Product Using Lightweight Concrete for Public Parks in Surabaya

    Science.gov (United States)

    Mulyono, Grace; Thamrin, Diana; Antoni

    2017-09-01

    The development of public parks into green city facilities in Surabaya has triggered the need of outdoor furniture designs that can resist the tropical wet and dry weather conditions while also having a certain mobility to support flexible park arrangement. However, present furniture designs made of concrete material are generally heavy and immovable. Flexible designs are needed for various activities that can take place at the same time such as sitting and playing, and to support changes in arrangement to keep the green open spaces attractive from time to time. This research develops the idea of a modular outdoor furniture design using cellular lightweight concrete (CLC) as the main material as a result from observing its resistance towards weather change and its relative light weight. It starts with analysis of problems, formulation of design concept, creation of design alternatives, selection of design, calculation of mouldings, adaptation of design to the mouldings and production of a scaled mock-up using CLC. Findings of this research reveal that the modular design along with the CLC material used not only support the flexibility of change in function and arrangement but also make these furniture resistant to the hot and humid weather of Surabaya.

  4. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    Directory of Open Access Journals (Sweden)

    Donata ZUBAUSKIENE

    2012-12-01

    Full Text Available Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into account the differences of applied materials mechanical properties. Otherwise external view and quality of upholstery may be unacceptable due to obvious visual material excess on soft furniture surfaces, which is called pull-on ease. The aim of this investigation was to determine the dependencies between three different levels of soft furniture upholstery pre-tension and corresponding values of pull-on ease. New testing method presented in this study allows defining soft furniture upholstery deformational behaviour and its regularities in respect to the initial dimensions of upholstery patterns.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3099

  5. Occupational injuries in the Finnish furniture industry.

    Science.gov (United States)

    Aaltonen, M V

    1996-06-01

    The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

  6. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  7. Ergonomics evaluation of a government office building.

    Science.gov (United States)

    Pentikis, John; Lopez, Mary S; Thomas, Robert E

    2002-01-01

    An ergonomics team from the US Army Center for Health Promotion and Preventive medicine evaluated 465 video display terminal (VDT) workstations in a Government office building over an 18-day period. Each workstation evaluation involved an assessment of the worker, the chair, the desk, the keyboard, the pointing device, the monitor, and the office environmental conditions. The team also collected worker pain and injury information. The problems seen during the evaluation were characteristic of most office environments where VDT workstation furniture was purchased before the advent of mouse-driven software. The majority of furniture evaluated was not designed to meet the demands of intensive mouse use for prolonged periods of time. Much of the workstation furniture was not adjustable, chairs lacked adequate back support, and workers assumed non-neutral postures. As a result, more than 35% of the workers evaluated complained of on-the-job pain. New office furniture that is adjustable, adequate desk space and storage space were among the solutions recommended by the ergonomics team.

  8. [Exposure to hazardous chemical substances in furniture industry].

    Science.gov (United States)

    Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

    2005-01-01

    The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

  9. The Investigation of Soft Furniture Upholstery Deformational Behaviour

    OpenAIRE

    Donata ZUBAUSKIENE; Eugenija STRAZDIENE; Virginijus URBELIS; Virginija SACEVICIENE

    2012-01-01

    Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into accoun...

  10. 76 FR 13667 - Commercial Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe...

    Science.gov (United States)

    2011-03-14

    ... Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Including...., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Chicago, IL; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of...

  11. Implementation of new technologies in wood industry and their effect in wood products quality

    OpenAIRE

    ELVA ÇAUSHI; PANDELI MARKU

    2014-01-01

    There are about 300 companies producing furniture and about 250 small and medium enterprises (SME) producing sawn timber, which operate in the field of wood industry in Albania. This wood industry production is being challenged by the increasing demand in the domestic market, ranging from kitchen furniture to office and schools furniture, bedroom furniture, doors, windows, and saw timber in different dimensions. The production from the wood industry can fulfill about 80% of the domestic mark...

  12. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    OpenAIRE

    Wang Lin; He Jinfeng; Xu Songjie

    2017-01-01

    In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber...

  13. Analysis of Value Chain Governance: Scenarios to Develop Small-Scale Furniture Producers

    Directory of Open Access Journals (Sweden)

    Rika Harini Irawati

    2011-05-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture industry had shown a long chain of production to consumption, from raw material producers (tree growers, semi-finished producers, finished product producers, and retailers to exporters. Jepara as a centre furniture industry in Indonesia incorporates around 15,000 business units and provide livelihoods to approximately 170,000 workers. This sector contributes about 27% of Jepara‘s people domestic income. Small and medium furniture enterprises (SMEs have significant roles in the furniture industry as production structures are characterized by them. Power and information imbalance throughout the furniture value chain have resulted in problems of uneven distribution of gains among actors of the industry. SME furniture producers have experienced an unfair value added distribution. Hence, development of SMEs is important for strengthening the industry and expected to result in a portion of value added distribution to them.  We are trying to develop scenarios for SME improvement in the furniture industry in Jepara by identifying their problems and implementing Value Chain Analysis (VCA. VCA is an approach to describe SME producer relations with other actors in the industry and the governance type of their relations. Data is collected by interviewing selected SMEs from the association of small scale producers in Jepara to get detailed maps of their value chain. The research will produce future scenarios and intervention points to improve small-scale producer sustainability and better value added distribution among furniture actors. The scenarios will not only benefit selected producers but also the furniture industry of Jepara, and can be adopted for similar industries throughout Indonesia and abroad. Keywords: furniture, value chain, governance, scenario, small-scale

  14. The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2017-01-01

    Full Text Available In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber physical system( CPS to cover the intelligent network.

  15. 76 FR 54794 - Klaussner Furniture Industries, Inc., Plant #3, Asheboro, NC; Klaussner Furniture Industries, Inc...

    Science.gov (United States)

    2011-09-02

    ...,989B] Klaussner Furniture Industries, Inc., Plant 3, Asheboro, NC; Klaussner Furniture Industries, Inc... of Klaussner Furniture Industries, Inc., Milford, IA; Amended Certification Regarding Eligibility To... Industries, Inc., Plant 3, Asheboro, North Carolina (TA-W- 70,989) and Klaussner Furniture Industries, Inc...

  16. Reconstruction of Furniture Production as Potential and Reputable Intellectual Property Rights (IPR Creative Design Model

    Directory of Open Access Journals (Sweden)

    husen hendriyana

    2017-10-01

    Full Text Available Along with recent rapid development of science, technology, art and culture, through research institutions from the central to the local level, the government seriously activates enhancement and protection of the intellectual products of the nation. Such as protection of intellectual property rights against irresponsible plagiarism. This is due to that the appearance, process, or invention steps of the creative furniture designer in the society or in the academic environment have the potential and the opportunity to be registered as Intellectual Properties (IP or gain Intellectual Property Rights (IPR. Besides aiming to lift up the state or institutions achievement and attainment of intellectual property rights internationally, the added value also can be developed in the direction of economic upgrade. Research on furniture products designs have been numerously carried out with various objects and cases, yet the diversity of the subject character and creative processes still have not well defined so they enrich the model of creative process design. This study aims to identify, classify and formulate a potential furniture design model of creative process and IPR standard, through methods PAR. The results of this study are (1 prototype of furniture design products, (2 the creative process model and the construction methods process of furniture design with a concept or a specific theme; (3 Registration of IPR; (4 Scientific manuscript. Seiring dengan perkembangan ilmu pengetahuan, teknologi, seni dan budaya yang marak dewasa ini, melalui lembaga penelitian dari tingkat pusat sampai ketingkat daerah, pemerintah semakin serius menggalangkan peningkatan dan perlindungan terhadap produk intelektual anak bangsa. Salah satu contoh di antaranya adalah perlindungan terhadap hak kekayaan intelektual dari perilaku plagiarism yang tidak bertanggung jawab. Hal ini tiada lain bahwa, bentuk, proses, maupun invention steps dari para pelaku kreatif desain mebel

  17. Tisettanta case study: the interoperation of furniture production companies

    Science.gov (United States)

    Amarilli, Fabrizio; Spreafico, Alberto

    This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

  18. 78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2013-06-12

    ....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

  19. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  20. production of particleboards using polystyrene and bamboo wastes

    African Journals Online (AJOL)

    HOD

    ... known industrial adhesives typically used for particleboard production. ... manufacturing of furniture, flooring, and work surfaces in offices ... manufactured as indicated in Table 1. The target .... approach to innovative product design,” WSEAS.

  1. Factors and methods of analysis and estimation of furniture making enterprises competitiveness

    Directory of Open Access Journals (Sweden)

    Vitaliy Aleksandrovich Zhigarev

    2015-06-01

    Full Text Available Objective to describe the author39s methodology for estimating the furnituremaking enterprises competitiveness with a view to carry out the economic evaluation of the efficiency of furniture production the evaluation of the internal component of the furniture production efficiency the identification of factors influencing the efficiency of furnituremaking companies and areas for improving it through improvements in product range production and sales policy of the enterprise. The research subject is modern methods and principles of competitiveness management applicable in a rapidly changing market environment. Methods in general the research methodology consists of six stages differentiated by methods objectives and required outcomes. The first stage of the research was to study the nature of demand within the target market of a furnituremaking enterprise. The second stage was to study the expenditures of a furnituremaking enterprise for implementing individual production and sales strategies. The third stage was to study competition in the market. The fourth stage was the analysis of possibilities of a furnituremaking enterprise in producing and selling furniture in terms of factor values combinations. The fifth stage was the reexamination of the demand with a view to its distribution according to the factor space. The final sixth stage was processing of data obtained at the previous stages and carrying out the necessary calculations. Results in general the above methodology of economic evaluation of the efficiency of furniture production based on the previously developed model gives the managers of enterprises an algorithm for assessing both market and firmlevel component of the furniture production efficiency allowing the subsequent identification and evaluation of the efficiency factors and the development of measures to improve the furniture production and sale efficiency as well as the assortment rationalization production and sales policy

  2. Contributions to the deployment of furniture in pole central region Tocantins

    Directory of Open Access Journals (Sweden)

    Jorge D’ Ambros

    2012-09-01

    Full Text Available This study was developed in the central region of Tocantins, for the identification and analysis of positive factors, weaknesses, opportunities and threats associated with the furniture supply chain in order to continue the formation of the regional furniture pole. To achieve this objective the methodology used was to listen to local actors and experts in the furniture segment. Seventy-five local actors among industry officials, academic institutions and university representatives were interviewed. They pointed out and analyzed the main points related to the economic, social, political and environmental contributions stemming from the creation of a pole in the region. The tool used was the SWOT Analysis associated with the Method of Judges, and then the variables were subjected to Principal Component Analysis - PCA. The SWOT Matrix proved to be adequate and effective to be used as diagnostic tool along with local actors. The examination of all the factors associated with local furniture production chain helped to understand the activity and indicate actions that affect this arrangement and that will bring economic, social and environmental benefits. According to the experts, the establishment of a furniture industry in the region will favor the employment and income creation, local and regional sustainable development, improvements in business management, raise the standard of quality and productivity of the local furniture industry and improve the quality of population standard of living.

  3. Identifying the customer satisfaction factors in furniture market

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-05-01

    Full Text Available Purpose – the purpose of this research is to identify the influential factors on customer satisfaction in the Iranian furniture market in order to get acquainted with the fundamental items for planning future sales programs with the purposes of extolling competitive advantages. Design/methodology/approach – A commixture of 6 items and 31 factors were educed from interviewing with 20 experts in furniture designing and manufacturing industry. The collected data from customer need indexes in previous research were also used. Findings – results showed that such factors as economic factors weighting 0.32, product specifications weighting 0.21 and credibility weighting 0.19 were the most important indexes and price weighting 0.195, fame weighting 0.131, quality, durability and resistance weighting 0.116, paying conditions weighting 0.095, designing and decorating in virtual softwares before ordering weighting 0.074, updatedness weighting 0.064 and interaction approach with the weight of 0.42 were the most considerable influential sub-indexes on the satisfaction of the Iranian furniture market customers. Research limitations/implications – by the enhancement of competition throughout the world markets and the inevitable presence of Iran in it, the market activists’ concentration should shift towards paying comprehensive attention to desires and needs of furniture market customers. Practical implications – some important issues on planning suitable manufacturing and marketing programs in furniture market are introduce so that the activists be aware of considering the growing knowledge and awareness of end-users which increases the pressure on the manufacturer side. There are also some solutions in terms of internal and external organizational factors with regard to the complex nature of competitive environment in furniture market. Originality/value – the paper provides an examination of effective factors on customer satisfaction with a

  4. Upgrading Wood-Based Industries: Harnessing the Social Network of Small-Scale Furniture Producers and Their Institutions

    Directory of Open Access Journals (Sweden)

    Melati ,

    2011-05-01

    Full Text Available Furniture is a major export commodity in Indonesia with a total value of USD 1.96 million in 2007.  Jepara District is one of the key location for wood furniture production with 15,271 furniture related business units employing 176,469 workers.  However, inefficiencies and power imbalances throughout the furniture value chain have resulted in overharvesting and uneven distribution of gains among the industry’s actors.  In contrast to price-setting international furniture retailers, small-scale producers enjoy the least value from their products.  In order to increase added value and competitiveness, small-scale furniture producers have made efforts to upgrade by harnessing their social network and institutions.  This paper describes small-scale furniture producers’ efforts to upgrade by utilising their social network and institutions in Jepara.  Data was collected through in-depth interviews with members of the small-scale furniture producers’ association.  The research provides insight into the nature of social networks and information flow and develops future scenarios to upgrade.  The scenarios will not only benefit the furniture industry in Jepara, but may also be adopted for similar industries throughout Indonesia and the world, and potentially improve many people’s economies and livelihoods.Keywords: wood-based industry, furniture, small-scale, social network, institution

  5. On the necessity of improving the environmental impacts of furniture and appliances in net-zero energy buildings.

    Science.gov (United States)

    Hoxha, Endrit; Jusselme, Thomas

    2017-10-15

    There is now clear evidence regarding the extensive use of furniture and appliances in daily human life, but there is less evidence of their impact on the environment. Responding to this gap in knowledge, this study focuses on an assessment of the environmental impacts of furniture and appliances as used in highly energy efficient buildings. Their primary energy, non-renewable energy and global warming potential indicators have been assessed by extending the boundaries of the Life Cycle Assessment (LCA) study beyond the building itself. In conclusion, we found that furniture and appliances were responsible for around 30% of greenhouse gas emissions and non-renewable energy consumption and 15% of primary energy consumption comparing to the overall impacts of the building. Since embodied impacts represent the largest values, the process for labelling the appliances' energy efficiency should encompass a life-cycle point of view, not just a usage point of view as the case currently. Among office appliances, computer equipment was ranked as the highest impacting element, especially laptops and monitors. As for domestic appliances, refrigerators and electric ovens had the biggest impacts. Concerning furniture, the greatest impacts were from office and kitchen cabinets. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. PENGARUH ORIENTASI PASAR TERHADAP KEUNGGULAN BERSAING MELALUI INOVASI PADA UKM BIDANG FURNITURE DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Sendhang Nurseto

    2016-02-01

    Full Text Available One of the small and medium enterprises in the city of Semarang is the field of furniture and furniture . Furniture or furniture that is often referred to as a product included in the household so that the furniture is not the scarce goods but is needed by the community . Realization of production every year to reach an average of only 90 % of the target . The resulting production also fluctuated every year , almost every year has decreased . The purpose of this study was to determine the effect of market orientation and innovation to compete SMEs lead with furniture in the city of Semarang . The population in this study was 64 furniture craftsman whose products have been exported to SMEs furniture Semarang . Way of selecting a sample ( respondents were used in this study using nonprobability sampling technique. Analysis using quantitative , qualitative analysis , validity , reliability testing , path analysis , descriptive analysis and differential analysis . The results showed t value of the variable effect of market orientation on innovation by 3.690 , the hypothesis 1 ( H1 that the Market Orientation proven positive effect on innovation . T value of the variable effect of market orientation on Competitive Advantage of 2,079 > t Table , hypothesis 2 ( H2 that the positive effect on market orientation Competitive Advantage proven . T value of the variable influence of Innovation for Competitive Advantage 3.332 > t table , the hypothesis 3 ( H3 that innovation has a positive effect on Competitive Advantage proven . Calculated F value of the variable influences Market Orientation and Innovation for Competitive Advantage by 9.396 > F table , hypothesis 4 ( H4 that the Market Orientation and Innovation positive effect on Competitive Advantage proven . Craftsmen will need to improve understanding of market orientation in the face of competition . Owned and increase innovation to improve the ability and skill to produce a better product thus

  7. Competing Explanations in the Evolution of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Howells, John

    This article assesses the credibility and relative economic importance of the many real and proposed unique development events in the Post-War evolution of the Danish furniture industry by means of available trade and production time series. It finds first, that the Danish industry experienced its...... only exceptional growth event compared to other developed country furniture industries in the 1950s. It is argued that this establishes as the leading causal candidates for the Danish economic specialisation in furniture; subsidised export marketing of Danish Modern style in the US and the War......-undamaged Danish industry’s opportunistic exploitation of recovering European Post-War furniture markets. Second, the apparent prominence of particle board manufacture in today’s industry is a Danish specialisation with its origin in the 1950s growth event. Third, while there is much evidence that IKEA became...

  8. 75 FR 54854 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2010-09-09

    ... Hospitality Product Mfg., Co., Ltd. Shanghai Kent Furniture Co., Ltd. Shanghai Season Industry & Commerce Co... International, Ltd., Super Art Furniture Co., Ltd., Artwork Metal and Plastic Co., Ltd., Jibson Industries, Ltd... Hospitality, Inc. Changshu HTC Import & Export Co., Ltd. Chuan Fa Furniture Factory Contact Co., Ltd. Decca...

  9. Influence of way of finishing furniture segments on amount emissions VOCs

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2010-01-01

    Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

  10. IKEA heats and cools with urban wase water. First energy saving furniture centre in Berlin-Lichtenberg; IKEA heizt und kuehlt mit staedtischem Abwasser. Erstes Energiespar-Einrichtungshaus in Berlin-Lichtenberg

    Energy Technology Data Exchange (ETDEWEB)

    Genath, Bernd

    2010-11-15

    In May 2010, the district major of Berlin-Lichtenberg (Federal Republic of Germany), Christina Emmrich, and the future boss of the Swedish furniture furniture IKEA, Jutta Iskalla, symbolically laid the foundation for the meanwhile 46th IKEA furniture store in Germany with a unique building engineering: The urban waste water heats and cools the office rooms and salesrooms via heat pump. The furniture centre is to be opened in December 2010.

  11. 78 FR 17140 - Upholstered Furniture Fire Safety Technology; Meeting and Request for Comments

    Science.gov (United States)

    2013-03-20

    ... retardant (FR) chemicals, specialty fibers/fabrics without FR chemicals, inherently fire resistant materials... Furniture Fire Safety Technology; Meeting and Request for Comments AGENCY: Consumer Product Safety... Commission (CPSC, Commission, or we) is announcing its intent to hold a meeting on upholstered furniture fire...

  12. STUDY ABOUT A FURNITURE COMPANY THAT USES NEW TECHNOLOGIES AND COMPUTERIZED EQUIPMENT

    Directory of Open Access Journals (Sweden)

    PUSTIANU Monica

    2015-05-01

    Full Text Available In Romania, there are companies that uses new technologies and computerized equipment leading to obtaining high quality products and profit. Furniture industry has continuously developed due to high demand for diversified products for all age groups. Romanian goods shall be delivered both in the country and abroad. The tapestries furniture made in our country, classical or modern, by leather in different colours or with textile coating materials fashionable chosen is already enjoying much attention from the external and internal customers. The workforce employed in the furniture manufacturing industry is qualified, managed to shape the wood into complex and elegant products that are able to give full satisfaction to all consumers SWOT analysis is defined as a complex research of economic aspects, technical, sociological, legal and managerial aspects that characterize the activity of a company and allows the formulation of an opinion on the past and present condition of the company. SWOT analysis may be carried out both at the level of functional areas of the company: financial, commercial, production, human resources, research and development, management and at the level of firm as a whole. By this analysis was obtained a clear picture of the current state of the analysed company, helping to knowledge and understanding of the general context in which the company operates. Key words: quality, furniture, management, production, analysis, SWOT

  13. TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Vitaliy A. Zhigarev

    2015-01-01

    Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

  14. Effects ok ikea's entry into a furniture production cluster

    Directory of Open Access Journals (Sweden)

    Vasco Eiriz

    2016-04-01

    Full Text Available The entry of a multinational into a cluster, a geographic agglomeration in a given place or region of predominantly small and medium enterprises specialized in a given industry or related industries, impacts the incumbent in the cluster. Aiming to identify the main effects of a multinational entry on the firms’ strategy in a cluster, it was analyzed the entry of IKEA, a Swedish multinational, into the cluster of furniture production in Paços de Ferreira and Paredes, in Portugal. In this study, the data collection technique to access primary data was a survey. The sample has small enterprises, which is similar to the structure of firms in the studied cluster. Results show that more than half the sample thinks that the entry of the multinational had not affected them. However, the firms that acknowledge a significant impact, assess that impact as negative. The competitiveness factors that have improved more significantly after IKEA’s entry were new product development and exporting strategies. The main responses of incumbent firms to the multinational entry were internationalization and the development of generic strategies of differentiation and focus based on differentiation.

  15. Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

    OpenAIRE

    Ririn Wulandari; Budi Suharjo; Agus W. Soehadi; Herry Purnomo

    2012-01-01

    International furniture markets certify ecolabel has been growing, but the domestic market has not yet developed. Unfortunate, because these products have two advantages that ensure environmental sustainability and promote a furniture market. This study was expected to open and developed the domestic market for ecolabel-certified furniture. The aim of this study was to develop marketing strategies for ecolabel-certified furniture on each of green consumer stratifications. Consumer stratificat...

  16. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  17. Fellin Furniture - disainitud kasutamiseks

    Index Scriptorium Estoniae

    2010-01-01

    Viljandis asuvast mööbliettevõttest Fellinn Furniture ja seal valmistatavast mööblist. Kollektsiooni algsed loojad on disainerid Sixten Heidmets ja Sirli Ehari. Disainis on kasutatud elemente, mis võimaldavad toodete väljanägemist kergesti muuta ja hõlpsasti ruumis paigutada. Valmistatakse ka uusi tooteid, mille disainimisele on kaasa aidanud kogu Fellin Furniture meeskond

  18. Internationalisation of the Malaysian Wooden Furniture Industry

    OpenAIRE

    Zhao, LiXu

    2016-01-01

    Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

  19. Marketing Strategy Analysis for Small and Medium Scale Business Enterprise (SMEs) for Home Industry Furniture in Leilem, the Regency of Minahasa

    Science.gov (United States)

    Pangemanan, S. A.; Walukow, I. M.

    2018-01-01

    Leilem is a small village located in Minahasa Regency. This village is well known for furniture products made of Timber. Eventhough the village has been producing various furniture products with high quality since many decades ago, it has not been able to compete with other new entries such furniture from Java, Synthetic Ratan, Plywood and plastic based furniture. The monotonous design and the finishing works done on the furniture have been some of the major issues in the decline of home furniture. The research explores problems and challenges faced by the furniture home Industry. It will also aim at identifying the internal and external factors that prevent the home industry to compete and survive. In the end the research will develop the strategic positioning of the home industry in the midst of competition. The research methodology employs descriptive analysis in which data are collected through observation, interview, and questionnaire. This methodology is combined with IFE (Internal Factor Evaluation) and EFE (External Factor Evaluation) Matrix, SPACE Matrix and SWOT Analysis and QSPM (Quantitative Strategic Planning Matrix). The sample is 66 business people, of 823 craftsmen who are working in this business. The result shows this home industry is very competitive in terms of consistency, but in terms of promotion, product quality, price, product diversification, design training of furniture, management and economic scale, it is lagging behind. The home industry should be able to develop marketing networking, improve design and product quality, promotion and cost control, product diversification and these can only be done by intensive training in managing business and investment.

  20. Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

    OpenAIRE

    OGAWA, Sayaka

    2018-01-01

    The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

  1. The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa

    OpenAIRE

    Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike; Readman, Jeff

    2003-01-01

    Because of its resource and labour intensity, the wood furniture sector presents an opportunity for developing countries and their firms to participate effectively in the global economy. This paper begins with a brief description of the global wood furniture industry and highlights the importance of exports wood furniture products for developing countries and emerging and transitional economies. The paper then maps the wood furniture value chain and opens-up the nature of the buying function,...

  2. Impact of the Financial Crisis of 2008 on Furniture Industry in the Czech Republic and Development of Tangible Fixed Assets in 2005– 2012 and its Possible Renewal

    Directory of Open Access Journals (Sweden)

    Tomáš Najbrt

    2016-01-01

    Full Text Available This paper is focused on furniture firms in the Czech Republic during the period 2005–2012, which covers the year of the crisis. The aim was to assess the given economic situation of the manufacturing businesses comparing some of the economic indicators such as tangible fixed assets, revenue from own production and services, pre-tax profit and labor costs. The study was conducted in the Czech Republic using the data provided by the Czech Statistical Office. Results for the specified period and selected groups of micro furniture companies are shown; dependence of economic indicators within the given time period is also analyzed. The analysis has shown that the smallest of the firms were least affected by the economic crisis; moreover, the medium-sized of the companies exhibit tangible assets growth and certain degree of inertia in years 2008 and 2009. Finally, possibilities how the micro furniture companies could proceed when purchasing new technologies are outlined.

  3. Opportunities for development of local forest markets: the case of Amish furniture manufacturing

    Science.gov (United States)

    Matt Bumgardner; Gary Graham; Charles. Goebel

    2012-01-01

    A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

  4. Emission of formaldehyde from furniture

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

    The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

  5. Kesiapan Produsen Mebel di Jepara dalam Menghadapi Sertifikasi Ekolabel (Readiness in Jepara Furniture Manufacturers in Confront of Ecolabel Certification

    Directory of Open Access Journals (Sweden)

    Herry Purnomo

    2012-01-01

    Full Text Available Furniture is a big 4 of Indonesia’s export commodities with palm oil, textiles, and rubber outside the oil and gas.Value-added is enjoyed by tens of millions of people involved in the value chain. But, the business is experiencingsevere challenges to the issue of certification and forest products (green or certified furniture and the scarcityof wood. Certified furniture is intended for preservation of forest resources, the healthy processing of furnituremaking as well as improving the welfare of artisans. From the supply side of certified furniture, large producershave been prepared while small producers are not ready. From the demand side, domestic consumers only wantto pay less for certified furniture, while British and Norway consumers are 16% 7.5% respectively. The increasein willingness to pay is lower than the certified furniture prices increased between 6–30%., Certification can bedone by a third party accredited by the Tropical Forest Trust (TFT, Indonesian Ecolabel Institute (LEI, orForest Stewardship Council (FSC. When the increase in production costs are higher than the desire of consumersto pay, then the certified furniture becomes difficult to be realized. Need specific strategies to market certifiedfurniture. This article is a case study in Jepara furniture craftsmen who accounted for 10% of national exports.Keywords: furniture certified, certification, forests, supply, demand, Jepara

  6. The structural analysis of small and medium size furniture ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... furniture enterprises in Turkey based on production, capacity use and .... has important structural, organizational and technological deficiencies, but it has .... the equipment they need change in compliance with the order they ...

  7. STRATEGI PENINGKATAN DAYA SAING INDUSTRI FURNITURE ROTAN INDONESIA DI KAWASAN ASEAN DAN TIONGKOK

    Directory of Open Access Journals (Sweden)

    Rudi Eko Setyawan

    2016-11-01

    Full Text Available Competitiveness of a country’s export commodities is one of the indicators used to measure its economic progress. This study aims to analyze the competitiveness of Indonesian rattan furniture in China and the ASEAN region, along with the influencing factors and to conclude appropriate strategies to improve its competitiveness. The analysis was conducted by utilizing Diamond's Porter, Normalized Revealed Comparative Advantage (NRCA, and panel data regression. The results showed that the competitiveness of Indonesian rattan furniture in the ASEAN region and China, in the period of 2001 to 2014, is fluctuated with small level of competitiveness. This notion can be seen from all of the positive NRCA index values. In the Fixed Effects Model (FEM, the independent variables that significantly influence NRCA include the export prices and volumes, global prices of rattan furniture and raw rattan, the number of rattan industries, production of real rattan, production value of rattan, investment of rattan industry, direct labor of rattan industry, interest rate of Bank loans, implementation of ACFTA and violation policy of raw and semi-finished rattan exports. To increase the competitiveness of Indonesian rattan furniture, the government is urged to establish a development or training center for the innovative designs and improvement of quality standard of Indonesian rattan furniture. This is also supported by a guarantee of rattan raw material availability and technological improvement of rattan processing industry. Thus, the third step to perform is the improvement of infrastructure and distribution chain, improvement of market information systems, and strengthening of brand image of rattan furniture in Indonesia.Keywords:  competitiveness of rattan furniture, diamond's porter, normalized revealed comparative advantage, fixed effect model ABSTRAKDaya saing komoditas ekspor negara merupakan salah satu indikator yang digunakan untuk mengukur kemajuan

  8. THE PARTICULARITIES OF THE COST CALCULATION METHOD ON COMMANDS IN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Felicia Sabou

    2014-10-01

    Full Text Available The paper present the importance of the method on commands in cost calculation and the particularities of the cost calculation method on commands in the furniture industry. This paper presents a hypotetical study on the method on commands, considering the observations made during 2013-2014, on how it is organized and managed accounts management using method on commands.By presenting this hypothetical model about the accounting in management accounting using the method on commands, the paper contributes to the correct application of this method in practice, specifically in management accounting in companies from the furniture industry. In my opinion the method on commands is an appropriate method for achieving management accounting for companies that have as main activity the production of furniture. When applying the method on commands in cost calculation and in management accounting, the companies must to consider the particularities of the cost calculation, in the furniture industry, like: technical and economic factors from this sector, the technical details of each command, the codification of the commands, planning materials and labor costs for each command, monitoring and recording production costs, registration of the direct costs, distribution of the indirect costs on commands, registration of the indirect costs and registration in management accounting.

  9. Furniture for a Technology-Infused School.

    Science.gov (United States)

    Fickes, Michael

    1998-01-01

    Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

  10. Consumer Behaviour Model on the Furniture Market

    Directory of Open Access Journals (Sweden)

    BEDNÁRIK, Éva

    2010-01-01

    Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

  11. Application of E-commerce based Internet Plus Strategy in the Chinese Furniture industry with analysis on case study and business model canvas

    OpenAIRE

    Cheng, Yun

    2016-01-01

    Furniture is one of the most important necessities in people’s daily life. The development of furniture industry can also be regarded as the progress of society. China is the world’s biggest furniture manufacturer and exporter. After the rapid development in past few decades, the production, technology and quality of furniture has already mature. However, the traditional marketing models are showing disadvantages. It is important for furniture companies to explore profitable marketing models ...

  12. Business Challenges and Design: Theory and Practice in the Furniture Industry in the Republic of Croatia

    OpenAIRE

    Radović, Romina

    2013-01-01

    Background: A systematic and continuous product policy management is important for a company's competitiveness and the question is to what extent and in what way companies engaged in the furniture manufacturing sector actually apply them. Objectives: The objective of this paper is to explore to what extent the design profession is involved in the product policy and teams which define market properties of products in the furniture industry. Methods: In order to achieve the objectives of this p...

  13. 75 FR 80528 - Wooden Bedroom Furniture From China

    Science.gov (United States)

    2010-12-22

    ... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

  14. Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

    OpenAIRE

    Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

    1983-01-01

    This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

  15. A research on the effect of global trends in Turkish kitchen furniture sector

    Directory of Open Access Journals (Sweden)

    Ersin Uçar

    2017-11-01

    Full Text Available Through survey results, this study evaluated global trends’ effects on Turkish kitchen furniture production. The level of knowledge and difficulties of catching up with and implementing developmental trends in the Turkish kitchen furniture sector has been seen as having a structure equivalent to world standards because the level of material and technological development has been determined by four criteria: consumer demand, housing plans, technology inadequacy, and material inadequacy. According to the results, findings in this framework, consumer demand was most influential (45.4% in capturing and implementing enterprises’ trends. Evaluation results on kitchen furniture projects implemented by Turkish enterprises within the last 5 years showed that they mostly worked with models with one-lid views in cabinet-door applications (41.6%. As a result, world trends reflect the direct influence of Turkish kitchen furniture manufacturers on cabinet-door models and color preferences for kitchen units.

  16. DESAIN FURNITURE PADA LABORATORIUM PENDIDIKAN SENI RUPA

    Directory of Open Access Journals (Sweden)

    Agus Nursalim

    2016-04-01

    Full Text Available Permasalahan dalam penelitian ini adalah bagaimana membuat desain furniture yang memenuhi standard Antrophometry dan Ergonomy untuk Laboratorium Pendidikan Seni Rupa. Penelitian mengkaji tingkat kenyamanan furniture yang dipakai mahasiswa ketika sedang praktikum di studio. Penelitian dilakukan dengan tujuan untuk mengenai standard kenyamanan pembutan desain furniture yang akan digunakan mahasiswa sebagai perlengkapan praktikum pada laboratorium Pendidikan Seni. Bentuk Penelitian ini adalah penelitian diskriftif dengan metode kwalitatif. Temuan awal dalam penelitian ini adalah: dimensi ergonomics dan antropometrics mahasiswa pendidikan seni rupa memiliki nilai X(mean masih dibawah standard International (rekomendasi: Dreyfuss dalam buku “:The Measure of Man” dengan standard deviasi 1.96 dengan persentil 2.5 dan persentil 97.5 masih dalam batas normal (Data Tabel 4.7 dan Tabel 4.8: dimensi antropomotrics mahasiswa Angkatan 20122013. Centre of grafity atau moment of grafity mahasiswa ketika praktikum dengan duduk bertumpu pada pantat dan daerah kerja normal pada rentang 72.4-87.5. Sedangkan mahasiswa yang melakukan praktikum dengan berdiri bertumpu pada kaki dengan angular motion dan siku bebas bergerak (SBB pada rentang 183.92212.9 (data Tabel 4.2-Tabel 4.5:Data Ergonomi Mahasiswa Angkatan 2012-2013 sesuai dengan rekomendasi C.G. Drury dalam „Journal Apllied Ergonomics’. Vol.13, p.135. masih dalam tingkat nyaman. Hasil temuan ini kemudian digunakan sebagai pertimbangan awal dalam membuat desain Furniture pada studio Pendidikan Seni Rupa. Dengan demikian mahasiswa merasakan kenyamanan dalam melakukan praktikum di Studio Pendidikan Seni Rupa dengan menggunakan furniture yang ada. Untuk itu furniture harus didesain yang adjustable. Kenyamanan Furniture berpengaruh signifikan terhadap prestasi mahasiswa. Desain furniture yang dibuat Adjustable diantaranya etsel untuk melukis, Meja kerja studio dasar, Kursi kerja untuk melukis, meja putar pada

  17. Strategi Pemasaran Mebel Kayu Sentra Industri Kecil Pondok Bambu, Jakarta Timur (Wood Furniture Marketing Strategy on Pondok Bambu Small Industry Centre, East Jakarta

    Directory of Open Access Journals (Sweden)

    Yulius Hero

    2011-01-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture is one of wood products to fulfill the household needs, especially for household furnishing. Wood product which is used for furniture tends to decrease because of the substitution products, i.e.: plastic, rattan, bamboo, glass, and metal. To continue their effort, small industries in Indonesia face hard problems and challanges. To solve the hard problems and challenges, then a new marketing strategy through the study on marketing strategy of small wood-furniture industry is needed. This research objectives are to know several factors which have relation toward marketing of woodfurniture and compile alternative small industrial marketing strategy of wood-furniture. Research conducts in Small Industry Centre, Pondok Bambu, East Jakarta from June to July 2008. Some tools are used in this research, such as: questionaire, calculator, camera, and stationery. The method of data collection is purposive sampling with total amount of responden is 30 people-small industry owners. Data analysis uses regression and SWOT method (Strength, Weaknesses. Opportunities, Threath. Result of the research for the regression equation of wood-furniture marketing Y= 9,001 - 0,6798 X1 - 1,4834 X2 - 1,4834 X3 + 0,4818 X4 with value R2 is equal to 51.3%. Linearity test model indicates that F Calculated is 6.57 in significat level α = 1%. Factors that influence wood-furniture marketing of sale volume are variation of product, wood-furniture price, distribution system and promotion. The relation between sale volume with variable of product variation, wood-furniture price, and distribution system is significant with negative direction. It means that smaller product variation, lower wood-furniture price, and more efficient distribution system; will effect to higher sale volume. Whereas the relation between sale volume with variable of promotion is not significant with positive direction. It

  18. Determination of effective criteria on development of RTA Furniture Industry in Iran

    Directory of Open Access Journals (Sweden)

    hosein omidi

    2016-06-01

    Full Text Available Ready to assemble furniture industry in Iran has not been considered by practitioners and investors as it is known in the other countries. While, it is possible to achive the many competitive advantage, if this industry develop in Iran. With regard to this issue, the goal of this study is to introduce the potential market for ready to assemble furniture and determination and prioritize of the effective criteria on development of Iran ready to assemble furniture industry. For this purpose, after preliminary investigation and interview with some of the furniture producers and relevant experts, the identified criteria were divided into five major groups as Economic, Management, Marketing & Sales, Technical-Technological and Infrastructure and as well as 42 sub-criteria. The hierarchy of these criteria was designed and then the weighting values of criteria and sub-criteria were determined using Analytical Hierarchy Process (AHP by expert choice software. The results indicated that the management and marketing & sales criteria have the highest weighting values at the first level. In addition, among the effective sub-criteria, the criteria as marketing innovation, design innovation, operations management, logistics management, raw materials innovation and product promotion, have the highest priorities for development of ready to assemble furniture industry in Iran.

  19. Use of design as competitive advantage in the furniture industry at Santa Maria/RS

    Directory of Open Access Journals (Sweden)

    Leoni Pentiado Godoy

    2012-08-01

    Full Text Available This article shows the contribution of innovative and proactive professional design to increase the competitiveness of the supply chain sector. Thus, the question that motivates the study were: how the design as a strategy, aligned to quality, can act as a competitive to micro and small enterprise in the furniture sector? The study conducted individual interviews with furniture industry managers and used questionnaires to furniture consumers in Santa Maria, located in the center of Rio Grande do Sul State. The research has shown that the search for mechanisms that create competition between companies is increasingly intense and the race for innovative methods to achieve efficiency has great importance. The design adds value to product in terms of aesthetics, ergonomics, comfort and functionality, besides being a very important element in the rationalization of production

  20. Feasibility Analysis of Sustainability-Based Measures to Reduce VOC Emissions in Office Partition Manufacturing

    Directory of Open Access Journals (Sweden)

    Marc A. Rosen

    2010-02-01

    Full Text Available A feasibility analysis is reported of reduction opportunities for volatile organic compound (VOC emissions in manufacturing office furniture partitions, aimed at contributing to efforts to improve the sustainability of the process. A pollution prevention methodology is utilized. The purpose is to provide practical options for VOC emissions reductions during the manufacturing of office furniture partitions, but the concepts can be generally applied to the wood furniture industry. Baseline VOC emissions for a typical plant are estimated using a mass balance approach. The feasibility analysis expands on a preliminary screening to identify viable pollution prevention options using realistic criteria and weightings, and is based on technical, environmental and economic considerations. The measures deemed feasible include the implementation of several best management practices, ceasing the painting of non-visible parts, switching to hot melt backwrapping glue, application of solvent recycling and modification of the mechanical clip attachment. Implementation, measurement and control plans are discussed for the measures considered feasible, which can enhance the sustainability of the manufacturing of office furniture partitions. Reducing VOC emissions using the measures identified can, in conjunction with other measures, improve the sustainability of the manufacturing process.

  1. How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

  2. Ikea success in chinese furniture

    OpenAIRE

    Yihong, Li

    2007-01-01

    This thesis will focus on the market exploiting and development of IKEA in China, analysis the characteristics of Chinese market and the supply-demand of the IKEA products in China. It also analyze the main Chinese consumers’ behaviour and evaluating the furniture retail market in China. IKEA is a successful case to open the china market recent years. The main goal is to acquire this information in order to provide the overseas retailers with a good starting point for creating an effective bu...

  3. Utilization of Anthropometry in the Sphere of Sitting and Bed Furniture

    Directory of Open Access Journals (Sweden)

    Kateřina Dvouletá

    2014-01-01

    Full Text Available Dimensions of furniture shall respond to current anthropometrical dimensions and ergonomic requirements which are recommended typological group of products. With relevance to the changes of population’s height and enlargement of body proportions (according to the last measuring from 1985, it is necessary to revise the majority of dimensions of human – furniture and standards (based on updated measuring of 375 men and women. The proper furniture designing will be dependent on that.The aim is a statistical evaluation of data from the anthropometrical measuring, acquired within the NIS grant and creating optimal dimensions of sitting and lying furniture so that they respond to the needs of current population. Graphical simulations created in ergonomic software Tecnomatix Jack are intended to illustrate the dimension requirements. The result are processed in a form of charts which are classified XS–XL. The outputs are compared to data in professional literature and standards. According to preliminary results, the optimal dimensions were designed and those will be further specified and verified. For future, it will be necessary to state the dimensions approximatively to expected population growth.

  4. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  5. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    F. Li

    2016-06-01

    Full Text Available Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i acquirement of prior-knowledge, (ii pole extraction, (iii components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  6. Pole-Like Street Furniture Decompostion in Mobile Laser Scanning Data

    Science.gov (United States)

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-06-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i) acquirement of prior-knowledge, (ii) pole extraction, (iii) components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

  7. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

  8. Dinamika Budaya Material pada Desain Furnitur Kayu di Indonesia

    Directory of Open Access Journals (Sweden)

    Arianti Ayu Puspita Ayu Puspita

    2016-09-01

    ABSTRAK   Perubahan kondisi ekonomi hingga abad ke-21, dan meningkatnya kebutuhan furnitur baik dari luar maupun dalam negeri, kemudian perkembangan ilmu desain di Indone sia, secara tidak langsung berhubungan de ngan permasalahan ekologi. Ketersediaan sumber daya alam seperti kayu, semakin berkurang sehingga mendorong industri furnitur di Indonesia untuk menggunakan alternatif berbagai macam kayu solid, kayu olahan hingga kayu limbah. Dari waktu ke waktu, perubahan kondisi sosial, ekonomi, dan gaya hidup, turut berperan pada kemunculan bentuk-bentuk furnitur baru di Indonesia. Pada penelitian ini, transformasi   kebutuhan material kayu pada furnitur akan dikaitkan dengan dinamika sosial budaya yang terjadi dari abad ke-18 hingga abad ke-21 di Indonesia. Tansformasi  akan dilihat berdasarkan perubahan teori Material Cultural Studies, yang kemudian akan menghasilkan kesimpulan bahwa konsep ekologi berperan penting dalam perkembangan desain furnitur kayu di Indonesia.   Kata kunci: transformasi budaya, furnitur, kayu, Indonesia, ekologi

  9. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

  10. Bamboo as sustainable material for furniture design in disaster and remote areas in Indonesia

    Science.gov (United States)

    Sofiana, Yunida; Wahidiyat, Mita; Caroline, Octaviana Sylvia

    2018-03-01

    Bamboo has been known as a sustainable material for architecture, but only used on a small scale for furniture. However, even though it a sustainable resource, many people considered Bamboo as outcast material for furniture because of its appearance. Evidently, the use of bamboo is often used to make simple tools with similar traditional designs for everyday life. The tradition of using bamboo was not further explored with respect to the ongoing development of creative design and function in the era of today’s modern technology. In retrospect to the above issues, this study is aimed to introduce the used of bamboo for material furniture in disaster and remote areas in Indonesia to increases their quality of life. It uses a research by a method of collecting data through surveys, literature review, interviews and training to determine the types of bamboo used for material furniture in disaster and remote territories. The results of this study is intended to show that the use of bamboo can be further developed into furniture for disaster and remote territory to create higher values of the products and increase the quality of life.

  11. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    Directory of Open Access Journals (Sweden)

    Radu Marginean

    2013-12-01

    Full Text Available he global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as such suffers serious structural mutations. Analyzing a series of macroeconomic indices from the European furniture industry led to the result that during the late years there has been a positive trend within the furniture industry in matters of production, however, with concern to trading, the situation is more complicated. There is a behaviour difference in the furniture industry between emergent countries and EU developed states and based on the performed analysis, a SWOT analysis at sectorial level crystallized, in which we propose ways of growth in the European furniture industry.

  12. 41 CFR 101-26.505-2 - Description of office and household furnishings.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Description of office and household furnishings. 101-26.505-2 Section 101-26.505-2 Public Contracts and Property Management Federal... household furnishings. (a) Office furnishings are articles which supplement office furniture and augment the...

  13. Ergonomic and anthropometric consideration for library furniture in an Iranian public university.

    Science.gov (United States)

    Osquei-Zadeh, R; Ghamari, J; Abedi, M; Shiri, H

    2012-01-01

    In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. 267 (120 female and 147 male) students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into "small," "medium," and "tall" groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  14. Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

    NARCIS (Netherlands)

    Flore, F.M.W.

    2013-01-01

    After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

  15. Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

    Directory of Open Access Journals (Sweden)

    Abdullah Cemil Ilçe

    2015-05-01

    Full Text Available The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL board that could be used in the furniture sector. Eastern beech (Fagus orientalis L. veneer papels (A and hollow polycarbonate boards (B, both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR and polychloroprene (PCR adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB, medium density fiberboards (MDF, and okoume plywoods (PW. According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

  16. Furniture Industry Assessment: Trade Policy and Market Opportunities

    OpenAIRE

    Lord, Montague J.

    1999-01-01

    The report analyzes the international competitiveness of furniture industry based on calculations of effective rates of protection and trade indicators. Furniture manufacturing remains one of the most highly protected industries in Egypt. Although the nominal rate of protection (NRP) for that industry was lowered from 50 percent in 1997 to 40 percent, its rate remains the fourth highest of all manufacturing categories. The effective rate of protection (ERP) for the wood furniture industry is ...

  17. Realization of FRC interior and exterior furniture

    Science.gov (United States)

    Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

    2017-09-01

    This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

  18. PRODUCT ADAPTATIONS IN THE INTERNATIONALIZATION PROCESS OF THE FURNITURE SECTOR COMPANIES IN THE SOUTH OF BRAZIL

    Directory of Open Access Journals (Sweden)

    Marise Mainieri de Ugalde

    2011-06-01

    Full Text Available Sustaintability is deserving more attention from companies, not only in their market relations but also in their product development strategies, specially those related with brands and packaging. This study analyzed the product adaptations demanded on the exporting efforts of seven furniture companies of the state of Rio Grande do Sul in the South of Brazil. To do this a multiple case study was carried out involving in depth interviews, observation techniques and analysis of documents. The data collected were analyzed for content and categories were defined considering the literature on the subject and opinions of specialists. Main results showed that most companies do not have a defined and deliberated strategy to act in the international scenario and most adaptations were related to product, brands and packaging were made according to requests from importers and aimed, basically.

  19. U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

    2003-01-01

    A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

  20. Perceptions of firms within a cluster regarding the cluster's function and success: Amish furniture manufacturing in Ohio

    Science.gov (United States)

    Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

    2011-01-01

    The Amish-based furniture manufacturing cluster in and around Holmes County, OH, is home to some 400 shops and has become an important regional driver of demand for hardwood products. The cluster has expanded even as the broader domestic furniture industry has declined. Clustering dynamics are seen as important to the success, but little information has been available...

  1. Physical and chemical evaluation of furniture waste briquettes.

    Science.gov (United States)

    Moreno, Ana Isabel; Font, Rafael; Conesa, Juan A

    2016-03-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

    OpenAIRE

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2016-01-01

    Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A nove...

  3. Gathering structured reflection in the furniture business by Trend Mapping

    DEFF Research Database (Denmark)

    Frei, Andrea Erika; Eriksen, Kaare Riise

    2015-01-01

    Setting up the direction for new product designs in the furniture business can be more or less structured and in many situations the idea for new design concepts, constructions, details, coloring or choice of material are directed by random input from retailers or external designers or from...

  4. Source emission and model evaluation of formaldehyde from composite and solid wood furniture in a full-scale chamber

    Science.gov (United States)

    Liu, Xiaoyu; Mason, Mark A.; Guo, Zhishi; Krebs, Kenneth A.; Roache, Nancy F.

    2015-12-01

    This paper describes the measurement and model evaluation of formaldehyde source emissions from composite and solid wood furniture in a full-scale chamber at different ventilation rates for up to 4000 h using ASTM D 6670-01 (2007). Tests were performed on four types of furniture constructed of different materials and from different manufacturers. The data were used to evaluate two empirical emission models, i.e., a first-order and power-law decay model. The experimental results showed that some furniture tested in this study, made only of solid wood and with less surface area, had low formaldehyde source emissions. The effect of ventilation rate on formaldehyde emissions was also examined. Model simulation results indicated that the power-law decay model showed better agreement than the first-order decay model for the data collected from the tests, especially for long-term emissions. This research was limited to a laboratory study with only four types of furniture products tested. It was not intended to comprehensively test or compare the large number of furniture products available in the market place. Therefore, care should be taken when applying the test results to real-world scenarios. Also, it was beyond the scope of this study to link the emissions to human exposure and potential health risks.

  5. A participatory and integrative approach to improve productivity and ergonomics in assembly

    NARCIS (Netherlands)

    Looze, M.P. de; Rhijn, J.W. van; Deursen, J. van; Tuinzaad, G.H.; Reijneveld, C.N.

    2003-01-01

    A participatory and integrative approach was applied to improve the productivity and ergonomics of the assembly lines in two factories, producing magnetic stop valves and office furniture, respectively. Main elements of the approach are the active participation of the company and the integration of

  6. Foreign subsidiary development of furniture industry in the context of global recession: case of Vietnam

    OpenAIRE

    Hoang, Ngoc

    2014-01-01

    Wooden furniture industry is a traditional low-technology based and labor intensive industry (Kaplinsky & Readman, 2000), which is highly recommended for global outsourcing. Besides, the raising of “China plus one” manufacturing strategy made Southeast Asian countries became new investment destinations. In case of Vietnam, the largest exporter of wood products in Southeast Asian, wooden furniture industry is highly export-oriented with a fast growing rate especially since 2008 (MARD, 2012). W...

  7. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Siti Suhaily,

    2012-07-01

    Full Text Available This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and technology. This research also discusses the need for biocomposite materials that do not depend on the growth of populations, but on the growth and development of the economy. This study focuses on globally available agro-based biocomposites, especially those from oil palm biomass: plywood, medium density fiberboard (MDF, wood plastic composite (WPC, laminated veneer lumber (LVL, oriented strand board (OSB, hardboards, and particleboard. Additional positive aspects of biocomposites are their environmentally friendly character, high quality, competitive design, and capacity to improve the value proposition of high-end products. These attributes increase the demand for agro-based biocomposite furniture on the international market.

  8. Ergonomic and Anthropometric Consideration for Library Furniture in an Iranian Public University

    Directory of Open Access Journals (Sweden)

    R Osquei-Zadeh

    2011-12-01

    Full Text Available Background: In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. Objective: To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. Methods: 267 (120 female and 147 male students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Results: Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into “small,” “medium,” and “tall” groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. Conclusion: The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

  9. Learning From the Furniture Scale

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    2018-01-01

    Given its proximity to the human body, the furniture scale holds a particular potential in grasping the fundamental aesthetic potential of architecture to address its inhabitants by means of spatial ‘gestures’. Likewise, it holds a technical germ in realizing this potential given its immediate...... tangibility allowing experimentation with the ‘principles’ of architectural construction. In present paper we explore this dual tectonic potential of the furniture scale as an epistemological foundation in architectural education. In this matter, we discuss the conduct of a master-level course where we...

  10. College and Community in Partnership: The Furniture College at Letterfrack.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    2001-01-01

    A community economic development organization in rural Ireland partnered with a technical college to build a college to teach furniture design and manufacturing, with an emphasis on entrepreneurship and new production technologies. The college has been successful in attracting good students and helping them find employment. A research and…

  11. AN ASSESMENT OF CURRENT EMPLOYMENT NEEDS IN THE ROMANIAN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cristinel Petrişor CONSTANTIN

    2015-12-01

    Full Text Available The paper presents the results of an exploratory survey among Romanian companies from the furniture industry. The study aimed to identify: (1 respondents’ opinions regarding the main competences that a candidate needs to prove in order to be hired; (2 attitudes regarding the competences of the graduates from the Wood Engineering Faculty, Transilvania University of Brasov; and (3 main current employment needs of Romanian furniture industry. The results indicated that the highest importance in the selection of employees is given to transversal competences such as: orientation to quality; learning capacity; and availability for self-development, team working; and involvement in meeting customers’ requirements. The interviewed representatives of the studied companies mainly need skilled workers in the furniture industry but also engineers able to manage the company’s processes, or to design certain processes and products. The results of the present study may be used by the Wood Engineering Faculty in their attempt to adapt the academic curriculum and course contents; and give their graduates a chance to acquire relevant competences which may enhance their employability.

  12. About furniture. Before and after Ptolomaeus Philadelphos' pavilion

    Directory of Open Access Journals (Sweden)

    Elena Calandra

    2010-07-01

    Full Text Available The furniture is of primary importance towards the canopies definition, more than the architectonic structure: they  contribute, in fact, in creating and organizing the spaces, so that there is almost no distinction between furniture and structure, as it is possible to observe in the ancient sources of different periods (Herodotus, Euripides, Julius Caesar, Plutarchus, Athenaeus: the pavilions of Xerxes at Plataia, of Ion at Delphi, of Alexander after the Issa battle and at Susa, of Pompey at Pharsalos, as well as the Ptolomaeus's canopy at Alexandria. At the same time, the furniture language is studied, signifying the power and the force of the sovereign through the luxurious materials and surprising the spectators.      At the end, some hypotheses on the final destination of the furniture, after dismantling the Ptolomaeus' canopy, equiped for one year.

  13. Intelligent Furniture Design in the Elderly Based on the Cognitive Situation

    Directory of Open Access Journals (Sweden)

    Lu Xinhui

    2017-01-01

    Full Text Available This paper analyzes the present situation of Chinese elderly furniture and the elderly has cognitive characteristics that consciousness experiences and recognitions recede, cognitive fuzzy from Information processing. Expounds the elderly intelligent furniture design elements: functional elements required the elderly furniture is easy and simple to handle; Size and shape elements should be biased towards low, light type, reduce multifunction or fold function; colour collocation should use low lightness and low purity natural materials; Emotional elements design should meet the demand of the elderly social emotion. Introduction of intelligent furniture make up the cognitive decline in the elderly, Furniture judge the elderly demand by the inductor, Supplement by hardware control module to solve the special needs of the elderly life. Build design thinking based on the cognitive process and explore the elderly intelligent furniture design. This paper discusses the design process, for example and concludes the design rules: 1.The Operating Experience Pleasure. It is the height matching of user expectation and furniture function. Pleasure in the design of the operating parts mainly embodies in two aspects. Firstly, the Fitts Law; Secondly, it’s The Movement Optimization. 2.”Unconscious” Design. Intelligent furniture need to delete unnecessary operation module, make it easy to understand, furniture function and cognitive scene match with each other. 3. Modularity Design. Modularization can indirectly regulate the scale and specification of the design. Under the premise of individual character, customization, the compression of the cost, Designer should make the elderly intelligent furniture consistent with the user action.4.Design Consistency. The consistency principle reflected in the appearance, color and operation way consistency.

  14. The wood household furniture and kitchen cabinet industries: a contrast in fortune

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2009-01-01

    In 1977, the value of wood household furniture shipments from domestic manufacturers exceeded kitchen cabinet shipments by 170 percent; conversely, in 2006 shipments of cabinets exceeded shipments of furniture by 78 percent. The most apparent reason for the decrease in domestic furniture shipments is the increase in furniture imports, whereas cabinet demand has...

  15. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  16. China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

    OpenAIRE

    Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

    2012-01-01

    China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

  17. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  18. Anthropometric evaluation of the Creches children furniture in Turkey.

    Science.gov (United States)

    Barli, Onder; Sari, Reyhan Midilli; Elmali, Derya; Aydintan, Erkan

    2006-12-01

    The dimensions of the living and working space and buildings, the types of material and different riggings should be designed to conform to the users' anthropometric measures. The first requirement to design on ergonomic system is to measure the human being who will work and live in that system. Because of this, anthropometric measures are the most frequently used ergonomic data during the design process. In this research paper, we attempt to organize a new data base of anthropometric data to use in the design of children's equipment and furniture used in crèches. A starting point for research on the proper dimensions of creche furniture is to investigate how the dimensions of furniture reflect the body dimensions and the functional needs of the children using furniture. The anthropometric data of 3, 4 and 5 year-old-children in crèches was used. We report the results of the measurements of 18 anthropometric characteristics of children which constitute a set of basic data for the design of functional spaces and furniture.

  19. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

  20. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Science.gov (United States)

    Bleda, Andrés L.; Jara, Antonio J.; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F.

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain. PMID:22778653

  1. Evaluation of the impact of furniture on communications performance for ubiquitous deployment of Wireless Sensor Networks in smart homes.

    Science.gov (United States)

    Bleda, Andrés L; Jara, Antonio J; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F

    2012-01-01

    The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  2. Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

    Directory of Open Access Journals (Sweden)

    Antonio F. Gómez Skarmeta

    2012-05-01

    Full Text Available The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

  3. Street furniture concept in Pasar Buah and Bukit Gundaling Based on place identity

    Science.gov (United States)

    Ginting, Nurlisa; Vinky Rahman, N.; Delianur Nasution, Achmad; Nawawiy Loebis, M.; Sinaga, Fitri A.

    2018-03-01

    Tourism is one of the largest sources of the foreign exchange for a country, that encourage many developers to develop it. Karo District located in the province of North Sumatera, Indonesia, which has many tourist destinations with natural and cultural resources, including Pasar Buah and Bukit Gundaling. To develop Tourism, one of way is with increasing place identity in tourist destinations. Unfortunately, place identity in Pasar Buah and Bukit Gundaling are still lacking, so it needs improvement, one of that is the Street furniture in Pasar Buah and Bukit Gundaling. This study aims to design the concept of the Street furniture planning in Pasar Buah and Bukit Gundaling. The method used is a qualitative method, that is design street furniture using five groups elements of street furniture: decorative element, service furniture, trade furniture, signaling furniture, and advertisement furniture. The result of this study is the concept of the design street furniture of Pasar Buah and Bukit Gundaling, which can use to improve place identity in tourism of Karo District.

  4. The ABCs of Cost Allocation in the Wood Products Industry: Applications in the Furniture Industry

    OpenAIRE

    Quesada-Pineda, Henry J.

    2010-01-01

    Discusses the basics of cost accounting and explains the strengths and weaknesses of two cost accounting techniques - the direct method and the activity-based costing method - using simple examples and applications to the furniture industry.

  5. 40 CFR 247.16 - Non-paper office products.

    Science.gov (United States)

    2010-07-01

    ... pressboard binders containing recovered paper; and solid plastic binders containing recovered plastic. (e... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Non-paper office products. 247.16...-paper office products. (a) Office recycling containers and office waste receptacles. (b) Plastic desktop...

  6. Business plan for a Chinese furniture company

    OpenAIRE

    Wang, Haodi

    2016-01-01

    Abstract As a popular consumable, marketing costs of furniture are directly related to the benefits of manufacturing enterprise. Nowadays, most furniture manufacturing enterprises still adopt the traditional marketing strategy, which is single-directional, indirect and hierarchical strategy. It is not only difficult to meet the various and individual customers needs but also expensive for enterprises to exploit the market. Meanwhile, it prevents enterprises from following the market needs....

  7. Evaluation of service conditions of the machines within the furniture joinery

    OpenAIRE

    Łukasz Zalejski; Noga Mariusz; Wojtysiak Marcin; Foszmanowicz Krzysztof

    2015-01-01

    The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM) rate, evaluation of the level of materialized technology using Parker's scale.

  8. Furniture firms shuns CSL for EMS program expansion

    Energy Technology Data Exchange (ETDEWEB)

    Deans, B

    1982-05-31

    The R.B. Furniture Company's disappointment in its 10 CSL Industries Inc. energy-management systems is responsible for a decision to install Trimax Controls in the remaining 67 stores. At issue are CSL's service policy of using independent installers and service contractors as well as technical problems with the equipment, although R.B. Furniture concedes it had a 2.5-year payback, a 20% drop in electricity consumption, and generally reliable performance of the CSL system. A CSL official claims its higher equipment costs are the real reason. Interviews with CSL and R.B. Furniture Co. representatives explore the attitudes and problems of both firms. The Trimex system includes a three-year warranty. (DCK)

  9. Furniture Industry in Kenya : Situational Analysis and Strategy

    OpenAIRE

    Creapo Oy; World Bank Group

    2015-01-01

    The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

  10. THE STRATEGIC RELEVANCE OF TECHNOLOGY-RELATED VARIABLES TO THE COMPETITIVENESS OF SMALL - TO MEDIUM-SIZED FURNITURE MANUFACTURERS

    Directory of Open Access Journals (Sweden)

    Lourens, A. S.

    2012-11-01

    Full Text Available SMMEs can make a critical and positive economic contribution to South Africa, and small- to medium-sized furniture manufacturers (SM/FMs have the potential to contribute to economic growth, job creation, and GDP. However, the furniture industry has not stayed abreast of technological advances. To survive in an environment of increasing competition and imports, competitive strategies must be devised. One such strategy is for technology adoption and implementation that can provide solutions for the furniture industry to improve speed, quality, variety, flexibility, and productivity, resulting in improved competitiveness. However, the adoption of technology means that its acquisition and application must be managed strategically, as the use of technology involves far more than simply taking it into account during the business-plan

  11. Importance of Logistics Processes for Customer Service and Firm Performance: Evidence from Furniture Industry of Pakistan

    Directory of Open Access Journals (Sweden)

    Imran Qadir

    2017-11-01

    Full Text Available Research Question: This study examines the relationship between logistics processes, customer service and firm performance in the furniture industry of Pakistan. Motivation: Furniture industry in Pakistan comprises small and medium enterprises wherein production is mainly labor intensive. Therefore, the current study also investigates the mediating role of manufacturing flexibility for the relationship of logistics processes and customer service. The paper applies the logistics models developed by Bowesox (1974, Green et al.(2008, and Tracey (1998 to furniture industry. Idea: The core idea of the paper is to measure the effects of logistics process on customer service and the performance of furniture manufacturing firms. The study takes the logistics process as an independent variable, the customer service as the first dependent variable and manufacturing performance as a moderating variable. Data: Primary data on logistics, customer service, manufacturing flexibility and firm performance were conveniently collected through a questionnaire from owners/managers of 61 furniture manufacturing firms. Tool: Descriptive statistics, correlation and regression analyses were run to draw the results. Findings: Logistics processes positively affect customer service and firm performance. Customer service also exerts a positive effect on firm performance while the moderating role of manufacturing flexibility was not supported for the relationship of logistics processes and customer service. Contribution: Through efficiency in logistics processes, furniture manufacturing firms can serve customers in a superior way to ultimately achieve improved firm performance. The framework being restricted to efficiency of logistics processes only constitutes an important limitation of the study.

  12. Evaluation of service conditions of the machines within the furniture joinery

    Directory of Open Access Journals (Sweden)

    Łukasz Zalejski

    2015-12-01

    Full Text Available The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM rate, evaluation of the level of materialized technology using Parker's scale.

  13. Investigating the Effective Index on Customers Choice in Buying Furniture

    Directory of Open Access Journals (Sweden)

    Hossein Rangavar

    2014-05-01

    Full Text Available The competitive world today, with increasing customers satisfaction and expanding the definition of hosting and its direct connection with quality of products is essential. Thus not only the current customers stay fixed but also it increases. The purpose of this study was to investigate and ranking the crucial indicators that influence the choice of furniture by customers. Because of this, the studied indexes are classified in 6 group: quality, beauty, design, creating a suitable atmosphere for selling the goods, selling conditions and advertising. Population consisted of three major commercial areas in Tehran (Delawaran, Hassan Abad and Yaftabad. Statistical sample consisted a number of 100 people. A questionnaire was developed to gather data. Reliability of the questionnaires has been approved through Cronbach's Alpha coefficient (0.921. Investigation of effective indexes was done by chi-square method and in order to final ranking the indexes, friedman analyses have been used. The results obtained of ranking showed the chief factor in customers choice is under category of beauty due to this elegancy role in customers point of view. After elegancy, according to the classified elements studied in this research, raw material in making furniture, wood production’s price, ergonomy, customers satisfaction for his last purchase and immediate delivery, respectively, are the most important effective index in buying furniture by consumer.

  14. DEVELOPMENT OF ENTERPRISE RESOURCE PLANNING APPLICATIONS TO HELP RESOURCES MANAGEMENT OF FURNITURE COMPANY USING TECHNOLOGY WINDOWS COMMUNICATION FOUNDATION

    Directory of Open Access Journals (Sweden)

    Didiek S Wiyono

    2013-09-01

    Full Text Available Furniture companies need the latest information of its resources to maintain efficiency and productivity. ERP can be used as a tool to manage the existing resources on furniture company and can quickly display the suitable information. The study was conducted to design a simple ERP application that can help resource management on the furniture company. ERP application built with object-oriented methods. The implementation is using web technology as the user interface, Windows Communication Foundation (WCF as the application interface with other systems, and HTTP / HTTPS as the transport protocol to access the application. The results of study is a simple ERP application which consist of order management, production, inventory, purchasing, and reporting. ERP applications can be accessible to users through the web. For the purposes of integration, has built 72 services of WCF that can be accessed by other applications even though using different platforms. Keywords: erp, web, windows communication foundation, integration

  15. User Requirements of Furniture Influenced by a Move to a Senior Housing

    Directory of Open Access Journals (Sweden)

    Oskar Jonsson

    2012-08-01

    Full Text Available User-centred design approaches within the field of furniture design for old people involves an act of embracing and balancing various end-user needs and assessing their relative importance for the product experience. It is often assumed that older people’s physiological needs dominate their other needs. In the present study, three focus group interviews were carried out with the exploratory purpose of gaining an understanding of how people feel and think about changes when moving to and living in an apartment in senior housing, outside the housing market, and what impact this has on their opinions of furniture and other interior products. Twelve people aged 59–93 took part. The outcomes of the focus group interviews point to demands on products that support the physical, psychological and social changes that relocation and aging may bring, and correspond to an independent and self-determinant identity. User requirements related to usability and affective product experience for the design of totally new or improved products are proposed. The paper discusses the complexity in the research assignment to communicate and bring end-user knowledge and experiences to life, and suggests that designers will benefit from carrying out or being involved in user-centred research.

  16. Customer Relationship within the Furniture Design Market : A qualitative study of how companies within the furniture design market relate to the challenges connected to customer loyalty

    OpenAIRE

    Wahlström, Marie-Louise; Bergström, Jenny

    2010-01-01

    Background: The customer relationship is becoming more important for companies within the Swedish furniture design industry due to competition for market shares. The market is getting more crammed while the interest for furniture design amongst people is increasing, therefore furniture design companies need to find effective ways to attract loyal customers. Research has been made to show the importance of collaboration between companies and this is something that can increase the market share...

  17. Ergonomic suitability of kitchen furniture regarding height accessibility.

    Science.gov (United States)

    Hrovatin, Jasna; Prekrat, Silvana; Oblak, Leon; Ravnik, David

    2015-03-01

    It is possible to significantly ease kitchen chores with properly sized and appropriately arranged cupboards. In designing kitchen furniture and the optimal depth and the height of storage capacities, accessibility should be taken into consideration. It is known that the optimal storage zone is between 800 and 1100 mm and that there is reduced visibility and accessibility at the level between 1400 and 1700 mm, which is even more prominent for the elderly. This suggests that wall cabinets are not recommended for the elderly. The aim of this study was to determine to what extent kitchens manufactured by Slovenian furniture manufacturers are suitable for users of different age groups with regard to the accessibility of goods stored in the cupboards. Furthermore, based on the measurement analysis, recommendations are provided for designing kitchen furniture that would meet the needs of the elderly. The study, carried out using a computer simulation model, analyzed the products of three Slovenian kitchen manufacturers. The cross section of accessibility in the wall cabinets was determined for different age groups of men and women. The results show that the efficacy of the volume in wall cabinets higher than 600 mm, in comparison to places where objects are easily reachable, is 30% lower for women, thus indicating the inefficiency of storage space in wall cabinets. In terms of accessibility, existing kitchens are not optimal for the elderly, and a model with a deeper worktop and wall cabinets lowered onto the worktop is proposed. Accessibility in such wall cabinets is increased by up to 70% if the body is moved forward by 30°.

  18. The FITS model office ergonomics program: a model for best practice.

    Science.gov (United States)

    Chim, Justine M Y

    2014-01-01

    An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

  19. Proxemic Transitions: Designing Shape-Changing Furniture for Informal Meetings

    DEFF Research Database (Denmark)

    Grønbæk, Jens Emil; Korsgaard, Henrik; Petersen, Marianne Graves

    2017-01-01

    Shape-changing interfaces is an emerging field in HCI that explores the qualities of physically dynamic artifacts. At furniture-scale such dynamic artifacts have the potential of changing the ways we collaborate and engage with spaces. In- formed by theories of proxemics, empirical studies...... of informal meetings and design work with shape-changing furniture, we develop the notion of proxemic transitions. We present three design aspects of proxemic transitions: transition speed, step- wise reconfiguration, and situational flexibility. The design aspects focus on how to balance between physical...... between a table and a board surface. These contributions outline important aspects to consider when designing shape-changing furniture....

  20. Understanding perception of wood household furniture: application of a policy capturing approach

    Science.gov (United States)

    David Brinberg; Matthew Bumgardner; Kim Daniloski

    2007-01-01

    Consumer and retailer perceptions of wood household furniture were modeled using a policy capturing approach. A sample of consumers and retailers evaluated four pictures of wood furniture on eight visual cues deemed representative of the furniture purchasing environment. These cues were then regressed on respondents' judgment of willingness to pay for each...

  1. Carel Breytspraak Sr., Purveyor to his Majesty King Louis Napoleon. Breytspraak furniture from the collection of the Royal Palace in Amsterdam

    Directory of Open Access Journals (Sweden)

    Paul van Duin

    2013-06-01

    Full Text Available In 1808, King Louis Napoleon had the town hall of Amsterdam converted to Royal Palace. Besides making the necessary architectural alterations, he ordered hundreds of pieces of furniture and other ornamental objects from local furniture makers, upholsterers, decorators and other suppliers. This collection of Empire furniture, which is still preserved in the palace, is today the largest of its kind outside France. Between 2005 and 2009, these pieces of furniture were restored as part of the wider restoration of the entire palace, a gigantic operation that involved hundreds of restoration experts. A furniture committee made sure that quality and looks remained uniform. During the process the restoration experts and researchers made a full study of the furniture, documenting finds and findings, supplemented with research into the origins, the makers, use, techniques and material. This is unique for the Netherlands. The data, recorded in documentation and restoration reports, offer fresh insights in especially the construction and manufacturing process of Dutch Empire furniture. The discoveries are illustrated by a number of purveyances by Carel Breytspraak Sr. (1769-1810, the best paid furniture maker of the king. The 100 chairs he made for the Grand dining room of the palace are an example of pre-modern serial production. This may be inferred from the varying quality of the wood that was used and from the varying thickness of the seat stretchers, among other things. Furthermore, it turned out that the chairs still had the original stuffing, which was reused after having been restored. One chair still had the original upholstery from the days of Louis Napoleon and this was used as the basis for the current upholstery. The chairs are typical examples of furniture made after French decoration prints, which were undoubtedly provided by the king’s architects. The roll-top desk that Breytspraak made for the king’s bedroom is one of the most unique

  2. A comparative study of three different kinds of school furniture.

    Science.gov (United States)

    Aagaard, Jens; Storr-Paulsen, Annette

    1995-05-01

    Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

  3. MODELING BILL-OF-MATERIAL WITH TREE DATA STRUCTURE: CASE STUDY IN FURNITURE MANUFACTURER

    Directory of Open Access Journals (Sweden)

    Toni Prahasto

    2012-02-01

    Full Text Available This paper presents a modeling of Bill-of-Material with tree data structure. The BOM represents wooden furniture products. The management of BOM is incorporated into an MRP software which is specially built for a furniture manufacturer. The tree data structure is approached with an object oriented programming to provide the creation and modification of the data. The tree object is designed so that a downstream programmer can create an application with high productivity, using the BOM object of course. Legality of the development is ensured by adapting open source resources, i.e. MySQL database engine, PHP server script, and client-side Javascript. The BOM object is used extensively in the MRP software that is being developed. A couple of screenshots are presented to demonstrate the ease of creation and manipulation of Bill-of-Material. The proper approach of modeling BOM with tree structure allows the programmer to reach high productivity during the development of the aforementioned MRP customized software. Keyword : Modeling, Bill of Material, Tree Data Structure

  4. Ecocitizen at the office

    CERN Multimedia

    Staff Association

    2014-01-01

    At the office, I do as I would at home At the office, just as at home, we need to stay warm, have light, be equipped (with office material, furniture). We thus need energy and raw materials. This consumption is not without consequences for our environment. How to reduce our consumption? In everyday life, we already have behaviours that allow us to save energy and resources, to sort our waste. At the office it is important to act in the same way as at home, as we spend a lot of time at our workplace. How to act more responsibly at the office, to reduce the environmental impact, and how to stay motivated? Computer, printer, copy machine… or coffee machine. There are quite a few electrical appliances which are indispensable in our office. Always turned on, or almost, they are also often inactive, and it is during these phases of inactivity that two thirds of their consumption occurs. The way one uses the computer is important in order to limit its consumption. Use the sleep mode with care. A c...

  5. Fungi in carpeting and furniture dust.

    Science.gov (United States)

    Schober, G

    1991-11-01

    The qualitative and quantitative species composition of fungi in carpets and upholstered furniture dust found in the living-rooms of nine Dutch dwellings was examined in a pilot study. Numbers of spores of xerophilic fungi did not differ in dust removed from carpeting and upholstery. Spores of hydrophilic species were found to be more predominant on floors (P less than 0.05), whereas meso-hygrophilic spores, largely dominated by allergologically relevant Penicillium species, were significantly more abundant in dust taken from regularly used furniture (P less than 0.05). Our results indicate that growth conditions for fungi in the micro-habitats of furniture differ from those in carpeting. No statistically significant differences in number of viable spores have been found in samples taken from ground-floor level compared with those taken from 1st to 3rd floor level of dwellings. From this study, the need for a micro-topographic analysis of the fungal flora in the human environment has become apparent. Efficient allergological home sanitation in dwellings of allergic patients requires detailed data about the colonization of the various micro-habitats by allergenic fungi.

  6. Explaining the Criteria of Designing Urban Furniture and Landscape, with a Cultural-social Design Approach

    Directory of Open Access Journals (Sweden)

    Marzieh Allahdadi

    2017-09-01

    Full Text Available Attention to the deep relationship between human personality and the place in which he lives causes the place to play a crucial role in cultural transformations and prevalence of human life style and formation of values, connections and human activities. Cities are not just a place of transit, but they are also environments that must have mutual communications with the inhabitants in order to realize the meaning of citizen, as there is a distinction between the status of citizenship and urbanization. Urban furniture is one of the elements of urban space that its quantity, beauty and durability play a major role in achieving a healthy and favorable city and satisfies the needs of citizens in terms of performance and beauty. Accordingly, the present study, using descriptive-analytical method and with data collection tools including library and documentary studies, examines the concept of product ecology and answers to the questions whether urban furniture can start or support social interaction or positively affect the roles of citizens? In this paper, the relationship between social-cultural design in urban furniture and the disturbances regarding uneven distribution of elements are identified, and finally the criteria of designing urban furniture and landscape are expressed with a social-design approach.

  7. A research on the preferences of material and size in the Turkish kitchen furniture industry

    Directory of Open Access Journals (Sweden)

    Tuncer Dilik

    2017-11-01

    Full Text Available This study intended to investigate the interaction developing rapidly through the impact of globalization experienced in every field on the material and size preferences of the kitchen furniture sector. The results of the survey conducted on the Turkish kitchen furniture manufacturers were evaluated within the framework of the international kitchen trends. As a result it was seen that the most preferred kitchen area was between 8 and 11 m2 regarding the distribution of the kitchen areas in Turkey. A tendency of using MDF in the production of the kitchen cabinets was observed with 61.8% in relation with the body material preferred to be used in the kitchen furniture sector. The preferred body sizes of the kitchen cabinet was determined by considering the width and height preferences of both the upper and lower cabinets, the size of 61-90 cm seemed to be the most preferred sizes both for the upper and lower cabinets. According to the height, 72 cm size was found to be the most preferred size. While the most preferred size among the cellar cabinets was determined to be smaller than 60 cm, its height was revealed to be bigger than 200 cm. The most preferred kitchen furniture base was detected to be 12 cm.

  8. Consumer perceptions of children’s furniture in Shanghai and Shenzhen, China

    OpenAIRE

    Chen, Jiao

    2013-01-01

    China’s high-speed economic growth has accelerated consumers’ disposable income evidently. With the improvement of living standards, people have increasingly been concerned about their life quality, especially when buying consumables like food, toys and clothing as well as durable commodities like furniture for their children. In the past ten years, the Chinese children's furniture market has developed rapidly, making up 9% of total furniture market. However, no studies concerning the analysi...

  9. Furniture Rack Corrosion Coupon Surveillance - 2012 Update

    International Nuclear Information System (INIS)

    Mickalonis, J. I.; Murphy, T. R.; Berry, C. J.

    2012-01-01

    Under the L Basin corrosion surveillance program furniture rack coupons immersed for 14 years (FY2009 coupons) and 16 years (FY2011 coupons) were analyzed and the results trended with coupons exposed for shorter times. In addition, a section harvested from an actual furniture rack that was immersed for 14 years was analyzed for pitting in the weld and heat-affected-zone (HAZ) regions. The L Basin operations maintained very good water quality over the entire immersion period for these samples. These results for FY2009 and FY2011 coupons showed that the average pit depths for the 6061 and 6063 base metal are 1 and 2 mils, respectively, while those for the weld and HAZ are 3 and 4 mils, respectively. The results for the weld and HAZ regions are similar to coupons removed during the period of FY2003 to FY2007. These similarities indicate that the pit development occurred quickly followed by slow kinetics of increase in pit depth. For the actual furniture rack sample average pits of 5 and 2 mils were measured for the HAZ and weld, respectively. These results demonstrate that pitting corrosion of the aluminum furniture racks used to support the spent fuel occurs in waters of good quality. The corrosion kinetics or pit depth growth rate is much less that 1 mil/year, and would not impact long-term use of this material system for fuel storage racks in L Basin if good water quality is maintained

  10. Multilevel model of safety climate for furniture industries.

    Science.gov (United States)

    Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

    2015-01-01

    Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

  11. Anthropometric measurements for ergonomic design of students’ furniture in India

    Directory of Open Access Journals (Sweden)

    Ismail Wilson Taifa

    2017-02-01

    Full Text Available This paper presents anthropometric measurements regarding engineering students in India. Health survey (ergonomic assessment was carried out to know the health status of all students who have been using poorly designed furniture. The data were measured with the help of various tools. After data collection and analysis, authors came up with exhaustive dimensions for designing adjustable classrooms furniture. Dimensions recommended include; bench surface height, bench depth and width, back rest width and height, backrest angle, desk height, desk depth, width, and desk angle. Therefore, an implementation of these data will help to create comfortability, safety, well-being, suitability, reduce Musculoskeletal disorders, and improve performance of students in terms of attentiveness. Also, it is highly recommended to consider requirements from students in designing classrooms furniture and conduct seminar or workshop to educate students regarding the negative impact towards adapting poor posture in the long usage of classrooms furniture.

  12. Sales Application Online of Design Furniture on Mitra Karya Furniture

    Directory of Open Access Journals (Sweden)

    Maimunah

    2016-02-01

    Full Text Available The development of the business world characterized by the increasing number of established companies, both of which are engaged in industry, trade and services. The role of computers use in a company or organization is not a layman anymore but is a must. With the computerized system in the company or organization, all the processes ranging from data processing to making reports and another important documents can be neatly arranged so that can facilitate the process of data storage and retrieval. The sales processing system are running still manually. They are still using flyers to find consumers so that ineffective and inefficient. The sales program is the design research proposed of information systems. By utilizing the technology of computer and internet in order word is to try making the facility of sales better. By creating an online sales system to make the working process does not spread the time so that the sale can run well and be good service. The designs created by using Dreamweaver CS5 and using the MySQL for database so the database stored neatly. The main function of the online sales system is to assist in facilitating the resources to get the latest product sales at MitraKarsa Furniture, so that the customer can buy the latest products easily, anytime and anywhere they want to.

  13. The Level of Customer Participation in Co-Production of Planning the Furniture Services Klientų įsitraukimo bendrai kuriant baldų projektavimo paslaugas laipsnis

    Directory of Open Access Journals (Sweden)

    Rigita Tijūnaitienė

    2011-02-01

    Full Text Available

    This article analyses customer’s level of participation in co-production of service. A client’s, known as a co-producer’s involvement is a pretty new conception of participation in creation of service where customers participate in projects, in direct, all-round and not only physical ways, together with professional representatives of service providers. A customer’s activity is becoming an important factor in order to achieve the results of effective creation of service, considering that client’s level while participating plays an essential role in the creation of service. To accomplish an empirical investigation, two quality methods were selected (observation and interview, which were performed in the company, which provides the services of furniture design. Theoretical literature analyses showed that there are three levels of customer’s participation: low, average and high, which usually appear in creation of co-productive service. Empirical investigation reve-aled that while co-producing services of furniture design customer’s level of participation can be: low, average, average high and high. This shows that “pure” level of participation in co-production of furniture design service appears rarely, while intermediate (“impure” level of participation can be observed more frequently. It is established that customer’s personality, temper, stress, lack of designer’s attention, preliminary decisions, and goods peculiarities determine causes of customer’s involvement/ devolvement. It is established that it is hard to elucidate and reveal customer’s needs, wishes and motives when the level of participation in co-production of furniture design service is low, and, as a result of that, a chance that the results of a service could not correspond to all customers expectations, rises. It is

  14. Analisis Strategi Pemasaran Usaha Jasa Bersama Furniture Jalan Setia Budi Medan

    OpenAIRE

    Silitonga, Natasya Meylani

    2014-01-01

    A thesis is called “Analysis of the strategy marketing Usaha Jasa Bersama Furniture.” Thebackground of this research is the development of business furniture currently, fueled by rising consumption needs as well as the from the community. And this is heightened by the increasing number of housing are constructed, so that is an opportunity that is very large in proportion to the business of furniture.With the increasing number of competitors, then many consumers, to be able to draw an underta...

  15. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    Directory of Open Access Journals (Sweden)

    Aries Wicaksono

    2014-11-01

    Full Text Available Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS. PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it is important for information systems running properly.This research aimed to audit the general control and applications control on the expenditure cycle accounting information system at PT. Lagio Furniture. This type of audit is audit around the computer. And then also collecting data through observation and interviews with relevant parties. Results of thereserarch is the expenditure cycle accounting information system at PT. Lagio Furniture was good. But there is still need to be improved in the control plan security, operational management control, and control inputs.

  16. New productive technologies for wood and furniture industry; Nuevas tecnologias productivas para el sector de la madera y del mueble

    Energy Technology Data Exchange (ETDEWEB)

    Sojo Calvo, F. J.

    2012-07-01

    During recent years, the wood industry and furniture industry have declined sharply, up to 46,5% of the total employment. These companies have always had a familiar character, their cost structure has enabled them to stay afloat during the crisis while larger companies have succumbed. The main problems that threaten their viability are the fall of the construction sector in the case of wood and the increasing imports in the case of furniture. The Industrial Observatory of the Wood Industry has made available two tools to put the latest technology available to the companies. (Author)

  17. Bad Enough Ergonomics: A Case Study of an Office Chair

    OpenAIRE

    Peteri, Virve

    2017-01-01

    The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufactu...

  18. The Business of: School Furniture: Innovative Designs for Tomorrow's Learning

    Science.gov (United States)

    Lacey, Kylie

    2013-01-01

    As instruction shifts to a learner-centric, individualized approach with a focus on small group activities, heavy furniture that small hands cannot move on their own have become less desirable. The most popular pieces are lightweight, portable, and colorful. The Smith System furniture company encourages schools to select chairs and desks in their…

  19. Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

    Science.gov (United States)

    Philip A. Araman

    1977-01-01

    The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

  20. The study of postural workload in assembly of furniture upholstery

    OpenAIRE

    Marek Lasota Andrzej; Hankiewicz Krzysztof

    2017-01-01

    The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs) which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS) with sampling. The results indicated that posture code ...

  1. Analysis of successful rate factors for small and medium enterprises in furniture manufacturing sector in Klaten Regency - Central Java, Indonesia

    Science.gov (United States)

    Budhi Utomo, R.; Lasminiasih; Prajaka, S.

    2018-03-01

    Small and Medium Enterprises (SMEs) are business activities that can expand the level of employment rate and provide economic services to the wider community and can play a role in the process of equalizing and improving people’s income, stimulating economic growth as well as realizing national stabilities. The aim of this study is to identify the factors of the success rate for Small and Medium Enterprises (SMEs) in furniture manufacturing sector in Klaten regency, Central Java, Indonesia. The method employed in this study was descriptive qualitative by also employing quantitative analysis of which the data were collected through observations, interviews and by administering questionnaires. The results seemed to indicate that the furniture business in Klaten is still experiencing difficulties in managing its various aspects of business, namely in terms of marketing (either directly or indirectly or by making the best use media of technology) and managing capital. All this time, the SMEs in furniture manufacturing sector in Klaten have been utilizing a very simple system in producing tables, chairs, wardrobes and any other furniture products which are then distributed to be sold by larger furniture companies. This condition makes the SMEs unable to be independent in running their business.

  2. 78 FR 13626 - Wooden Bedroom Furniture From the People's Republic of China: Initiation of Administrative Review

    Science.gov (United States)

    2013-02-28

    .... Shanghai Fangjia Industry Co., Ltd.... No. Shanghai Hospitality Product Mfg., No. Co., Ltd. Shanghai... Co., Ltd., Artwork Metal & Plastic Co., Ltd., Jibson Industries Ltd., Always Loyal International.... Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

  3. Effectiveness of low cost adapted school furniture on the functional performance of a child with cerebral palsy

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Teixeira Piovezanni

    2014-06-01

    Full Text Available Individuals with cerebral palsy present an atypical motor function, characteristic altered postures in movement coordination and muscle tone. This causes limitations in their ability to perform functional activities. In this context, the introduction of assistive technology is vital to the objective of augmenting their ability to function productively and be included in society. It is common for individuals with cerebral palsy to have difficulty maintaining body dynamics, especially with seated posture. The objective of this study is to produce an adapted school desk and adapted school chair with low cost materials and to study their efficacy in adjusting the writing motor skills of a child with cerebral palsy. This stydi’s case is a boy who has been diagnosed with diplegic cerebral palsy. The collection and registration of data was done in three stages, with the child positioned in adapted furniture, regular school furniture and again in the furniture adapted to establish a comparison. Data analysis was through nonparametrical statistical tests. There was no statistical significance and was verified inconsistency in the data presented, because cannot be said for sure wich furniture was more effective in carrying while performing a proposed task and even if there was learning motor with its repetition. This fact does not invalidate the adequacy of school furniture to the student with cerebral palsy, because is an important factor facilitate control and postural stability to the individual, which interferes with fine motor skills of these individuals, influencing their performance in school activities.

  4. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    Full Text Available Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  5. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Science.gov (United States)

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  6. Use of lasers in the furniture industry

    Science.gov (United States)

    Wieloch, Grzegorz; Pohl, Piotr

    1995-03-01

    One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

  7. Design of indoor furniture with acoustic insulation and noise reduction function

    Science.gov (United States)

    Chen, Ziqiang; Lyu, Jianhua; Chen, Ming

    2018-05-01

    In this article, the current status of noise pollution research is analyzed and indoor noise pollution hazard on human body is discussed taking noise pollution as entry point to better understand people's needs in this concern, and it comes to the conclusion that indoor furniture with noise insulation function is required; In addition, the design status and necessity of indoor furniture with noise insulation function are expounded and the material property, structure design essentials and form design are analyzed according to sound transmission principles. In the end, design case study is presented to provide an effective way for design of indoor furniture with acoustic insulation function that meets people's needs.

  8. 75 FR 9869 - Initiation of Administrative Review of the Antidumping Duty Order on Wooden Bedroom Furniture...

    Science.gov (United States)

    2010-03-04

    ... Plastic Co., Ltd.,* Jibson Industries, Ltd.,* Always Loyal International * Baigou Crafts Factory of... Faith Limited * Brother Furniture Manufacture Co., Ltd. * C.F. Kent Co., Inc. C.F. Kent Hospitality, Inc... Company Limited * Dongguan Chunsan Wood Products Co., Ltd.,* Trendex Industries Ltd.* [[Page 9872...

  9. Classroom Furniture: The Mod Squad

    Science.gov (United States)

    Raths, David

    2012-01-01

    This is the first article in a six-part series on the elements of a collaborative classroom: furniture, social media, video/web conferencing tools, collaborative software, interactive devices, and mobile devices. With most universities facing tight budgets, convincing administrators to invest in expensive new classrooms is a challenge. Many higher…

  10. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

    2012-06-01

    between wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

  11. RFID- TEKNIIKAN MAHDOLLISTAMAT TYÖAIKASÄÄSTÖT HUONEKALUTEOLLISUUDESSA : - CASE INCAP FURNITURE OY

    OpenAIRE

    Taskinen, Jarkko

    2009-01-01

    Opinnäytetyön tarkoituksena oli selvittää RFID- tekniikan eli radiotaajuudella toimivan etätunnistamisen mahdollistamia työaikasäästöjä huonekaluteollisuudessa. Toimeksiantaja oli Incap Furniture Oy. Incap Furniture Oy on yksi suurimmista mäntyhuonekalusopimusvalmistajista maailmassa. Pääasiakas on Ikea. Incap Furniture Oy on aloittanut projektin, jonka tarkoitus on tutkia RFID- tekniikan mahdollisuuksia ja hyötyjä tehtaiden toiminnassa. Opinnäytetyö oli osa projektia. Opinnäyt...

  12. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    Directory of Open Access Journals (Sweden)

    Basworo Ardi Pramono

    2012-07-01

    Full Text Available Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dikembangkan dengan mengimplementasikan beberapa komponen  teknologi utama yaitu Augmented Reality (AR, engine 3D ke dalam aplikasi.  Keseluruhan komponen tersebut dirancang agar dapat  menghadirkan suasana belanja yang menarik di hadapan user secara digital. Dengan demikian user dapat mencoba apakah furniture yang di beli cocok dengan ruangan. Dengan menggunakan FSM, user dapat mencoba model 3D furniture, memilih model furniture hingga mengambil foto ruangannya dengan hasil visualisasi model furniture 3D yang disukai untuk selanjutnya dapat disimpan.

  13. Investigation of Miter Corner Joint Strength of Case Furniture from Particleboard

    Directory of Open Access Journals (Sweden)

    Valdas NORVYDAS

    2012-12-01

    Full Text Available Most pieces of case furniture (kitchen and bathroom furniture, cabinets, wardrobes, tables and etc. are made of 18 mm thick wood particle boards finished with various coatings. This three-layered constructional material is obtained by bonding wood particles of different fractions with synthetic resins using heating. The exploitation duration and quality of case furniture is determined by the mechanical properties of wood particle boards and the construction of joints of wood-based panels. On a frequent basis, pieces of case furniture with non-dismantable and dismantable construction are joined by using multidowel glued joints and cam connecting fittings intended for furniture, respectively. Wood-based panels can be joined with mitre joints whose mechanical properties have not undergone testing and comparison with regular joints when applying insertable wooden dowels or furniture connecting fittings. During the testing of particle board properties it was established that joining wood-based panels in this way ensures most efficient use of mechanical characteristics of the particleboard. In addition to the properties of the mitre joint, the tests also allowed determining the bending strength, tensile strength and bonding strength of the constructional material, and providing an original method for testing board properties, which can be successfully applied to the prediction of properties of the mitre joint. Tests were performed by using a universal tensile testing machine P-0.5. Joints were bonded by applying PVA dispersion. The surface of boards was veneered by using mahogany veneer and urea formaldehyde resin. It was found that mitre joints of wood particle boards can withstand loads that are higher from 2 to 4 times, in comparison to glued doweled joints or joints constructed with cam connecting fittings.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3095

  14. Optimization of a furniture factory layout

    Directory of Open Access Journals (Sweden)

    Tadej Kanduč

    2015-03-01

    Full Text Available This paper deals with the problem of optimizing a factory floor layout in a Slovenian furniture factory. First, the current state of the manufacturing system is analyzed by constructing a discrete event simulation (DES model that reflects the manufacturing processes. The company produces over 10,000 different products, and their manufacturing processes include approximately 30,000 subprocesses. Therefore, manually constructing a model to include every subprocess is not feasible. To overcome this problem, a method for automated model construction was developed to construct a DES model based on a selection of manufacturing orders and relevant subprocesses. The obtained simulation model provided insight into the manufacturing processes and enable easy modification of model parameters for optimizing the manufacturing processes. Finally, the optimization problem was solved: the total distance the products had to traverse between machines was minimized by devising an optimal machine layout. With the introduction of certain simplifications, the problem was best described as a quadratic assignment problem. A novel heuristic method based on force-directed graph drawing algorithms was developed. Optimizing the floor layout resulted in a significant reduction of total travel distance for the products.

  15. Factors related to furniture anchoring: a method for reducing harm during earthquakes.

    Science.gov (United States)

    Haraoka, Tomoko; Hayasaka, Shinya; Murata, Chiyoe; Yamaoka, Taiji; Ojima, Toshiyuki

    2013-02-01

    Fatalities and injuries during an earthquake can be reduced by taking preemptive measures before-hand, and furniture anchoring is an important safety measure for all residents. This study sought to clarify the factors associated with furniture anchoring within the home. A self-administered mail survey was completed from July to August 2010 by 3500 men and women between the ages of 20 and 69 years who were chosen at random from an official government resident registry of 2 cities in Japan. Of the 1729 valid responses, 37.1% reported furniture anchoring. An association with furniture anchoring was observed for having viewed earthquake intensity maps or damage predictions (odds ratio [OR] 1.92, 95% C1 1.54-2.39), expressing concern about a future earthquake (OR 2.07, 95% C1 1.36-3.15), feelings of urgency (OR 1.90, 95% CI 1.47-2.45), accuracy of the government disaster preparedness information (OR 1.68, 95% CI 1.17-2.42), knowledge of the meaning of emergency earthquake warnings (OR 1.67, 95% CI 1.12-2.48), and participation in voluntary disaster preparedness activities (OR 1.40, 95% C1 1.12-1.75). Furniture anchoring was found to be associated with risk awareness, risk perception, disaster preparedness information provided by government to residents, knowledge of earthquakes, participation in voluntary disaster preparedness activities, nonwooden structures, and marital status. An increase in furniture anchoring is important and can be achieved through education and training in daily life.

  16. Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

    OpenAIRE

    Wicaksono, Aries

    2014-01-01

    Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS). PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it...

  17. Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Mousavi

    2018-06-01

    Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

  18. Value Criteria for School Furniture

    Science.gov (United States)

    Spellman, Walter

    2012-01-01

    Making furniture decisions can involve many factors, and they vary from institution to institution. For fixtures, furnishings and equipment, comparing initial cost with the cost of ownership over a life cycle can be more challenging. It may be the functionality of the furnishings that provides the greatest return on investment. In this article,…

  19. [The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

    Science.gov (United States)

    Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

    2016-10-20

    Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

  20. How do retailers rate the United States and Canada as furniture sources compared to China?

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Mary Frye; Torsten Lihra

    2008-01-01

    During the past decade, the U.S. wood household furniture industry has lost a significant share of its domestic market to imported furniture. This market share loss has been widely discussed and analyzed, largely from a manufacturing perspective. A relatively unexplored dimension of household furniture importing is the perspective of the retailer. Retailers play a...

  1. The strategic positioning as determining of the future of a furniture industry: education case

    Directory of Open Access Journals (Sweden)

    Cleber da Costa Webber

    2016-12-01

    Full Text Available This case presents a turning-point in the history of the company Expolight, a family company that is several years in the market working in the commercial furniture segment. In the state of Rio Grande do Sul, which is one of the leading furniture manufacturers poles of Brazil, being the products of this region recognized for their high quality. The case presents a decision point where the company needs to choose between keeping their market position, or accept the challenge of a new client, taking into consideration the investments and risks involved. The purpose of this Educational Case is to promote discussion and reflection on topics such as entrepreneurship, strategic management, innovation management and marketing, exercising decision-making based on the data presented. It also has element to the debate on globalization, partnerships and organizational culture.

  2. STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA

    Directory of Open Access Journals (Sweden)

    Apriyanti Apriyanti

    2014-07-01

    Full Text Available The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a base form marketing alliance that, enclose: product or sevice alliance, promotional alliance, logistic alliance and pricing collaborations. This examination intend to give alternative of formulation strategi that will be used by company in make alliance strategy.To reach the purpose in order to get exact strategy formulation is used by analisis tool that are SWOT Matric, BCG Matric, and QSP Matric. With first base by identifying external factor and internal factors. The result of alliance strategy analysis formulation at furniture company according analysis result of SWOT Matric, BCG Matric, and QSP Matric are recommended 4 strategy that is done by each company with step priority application as follow: I Strategic service alliance, II Strategic opportunity alliance, III Strategic pricing collaboration and IV Strategic promotional alliance.

  3. Identifying future competitive business strategies for the U.S. furniture industry: Benchmarking and paradigm shifts

    Science.gov (United States)

    Albert Schuler; Urs Buehlmann

    2003-01-01

    This paper describes benchmarking activities undertaken to provide a basis for comparing the U.S. wood furniture industry with other nations that have a globally competitive furniture manufacturing industry. The second part of this paper outlines and discusses strategies that have the potential to help the U.S. furniture industry survive and thrive in a global business...

  4. Retouching without Touching : Creating the illusion of recoloured furniture through light projection

    NARCIS (Netherlands)

    van Adrichem, F.; van Bommel, M.; Vasques Dias, M.

    2017-01-01

    In this article an alternative method for recolouring discoloured furniture is presented. The focus is on two discoloured pieces of furniture: an Amsterdam School buffet and a Rococo marquetry commode that both have lost their bright colours due to fading (figures 1, 2). The buffet was dyed with a

  5. Ergonomic suitability of educational furniture and possible health implications in a university setting

    Science.gov (United States)

    Odunaiya, Nse A; Owonuwa, Dolapo D; Oguntibeju, Oluwafemi O

    2014-01-01

    Ergonomically unsuitable school furniture is frequently considered one of the major causes of severe posture problems in adulthood. This study was designed to determine the ergonomic suitability of educational furniture in the lecture theaters at the University of Ibadan to serve as a case study. Sample of convenience was used to select participants for this study. The lecture theaters were selected based on their capacity, design, and dimension. A total of 240 students (120 males and 120 females) participated in this study. The ergonomic suitability of lecture theaters was determined by analyzing the mismatches between student anthropometric dimensions and furniture dimensions, and also by analyzing the design and orientation of the lecture theaters. The data were analyzed using descriptive statistics of mean, standard deviation, range, and median. The results showed that there was a significant difference in height between males and females but no significant difference between other anthropometric variables measured. About 20% of the participants had a fitting seat height, while seat height was unsuitable for the remaining 80.4%. On the other hand, 23.3% had a fitting seat depth, while it was unsuitable for 76.7% of the participants, and 99.6% of the participants had fitting desk clearance but 0.4% found it unsuitable. A total of 25.8% of the participants had a fitting desk height, while 74.2% of the students found it unsuitable. It was concluded that the furniture in the lecture theaters at the university studied was not ergonomically suitable for the students. Hence it is recommended that further studies, including more universities across a wide spectrum of society, should be performed to determine the effect of furniture on student health, and the need to adopt the use of adjustable furniture in lecture theaters to prevent health hazards that may occur secondary to the use of unsuitable furniture. PMID:24511247

  6. A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

    OpenAIRE

    Siti Suhaily,; Mohammad Jawaid,; H. P. S. Abdul Khalil,; A. Rahman Mohamed; , F. Ibrahim

    2012-01-01

    This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and te...

  7. Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

    Science.gov (United States)

    Matthew Bumgardner; David Nicholls; Valerie Barber

    2009-01-01

    In recent decades. red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade lumber containing numerous visual...

  8. Improving the Sustainability of Office Partition Manufacturing: Balancing Options for Reducing Emissions of Volatile Organic Compounds

    Directory of Open Access Journals (Sweden)

    Marc A. Rosen

    2009-06-01

    Full Text Available Options are examined to improve the sustainability of office partition manufacturing by reducing volatile organic compounds (VOC emissions. Base VOC emissions for a typical plant are estimated using a mass balance approach. Pollution prevention and sustainability measures are assessed using realistic criteria and weightings. Sustainability has been considered from an industry perspective, considering factors like economics, environmental impact, quality, health and safety. Through a case study, it is demonstrated that several advantageous options are available for reducing VOC emissions in manufacturing office furniture partitions, and thereby enhancing the sustainability of that industrial operation. The measures deemed most viable include implementing several best management practices, not painting of non-visible parts, switching gluing processes, recycling solvent and modifying attachments. The results are intended to be balanced so as to improve their acceptability and adoptability by industry. It appears that it would be advantageous for manufacturers of office panels to evaluate the feasibility of these measures and to implement the most appropriate. The results are likely extendable to other operations in the wood furniture industry, and would improve their sustainability.

  9. Establishing an online store in the furniture retail business : Case study of Lähdesmäki Oy

    OpenAIRE

    Kareno, Justus

    2013-01-01

    This thesis describes the process of establishing an online store for a Finnish furniture retailer. The development of electronic commerce as a means of business is introduced as the force driving furniture retailers to establish an online presence. The theory of electronic commerce is presented and analyzed in terms of differences compared to sales via a conventional store. The development of electronic furniture retailing is analyzed by researching furniture retailers in Finland and th...

  10. A new approach of the design process for replacing wooden parts of furniture

    Directory of Open Access Journals (Sweden)

    Ciupan Cornel

    2017-01-01

    Full Text Available Based on different design processes for innovative products, the paper presents a new approach of the process. The new method studies the problem of replacing the wooden components of the resistance structure of furniture with other materials. This is a reverse engineering process, that starts with the entire component, following a series of steps to the part drawings, ready for manufacturing. The method was validated by redesigning some parts of the upholstered products manufactured by TAPARO Company, by replacing the wooden parts of the resistance structure of sofas with composite material.

  11. Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

    Science.gov (United States)

    Oddone, Enrico; Imbriani, Marcello

    2016-01-01

    The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  12. Supply chain improvements through clustering: Relationships and competitive collaboration in the Norwegian furniture industry

    OpenAIRE

    Lindholm, Jorunn; Rødstøl, Anna With

    2015-01-01

    Master's thesis in Firm management There is an on-going debate regarding what Norway will do when the country can no longer rely as heavily on the oil as a source of wealth and prosperity. As there is a tradition for designing and making furniture in Norway, and the furniture industry is not dependent on favourable natural conditions, this industry could represent an alternative. As the Norwegian furniture manufacturing companies are producing in one world’s most high waged countries, ...

  13. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  14. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  15. 75 FR 339 - Wooden Bedroom Furniture From the People's Republic of China: Rescission of Antidumping Duty New...

    Science.gov (United States)

    2010-01-05

    ... Republic of China: Rise Furniture Clarification Regarding Withdrawal of Review'' (November 24, 2009... Bedroom Furniture from the People's Republic of China: 2009 New Shipper Review of Rise Furniture Co., Ltd... From the People's Republic of China: Rescission of Antidumping Duty New Shipper Review AGENCY: Import...

  16. The Amish furniture cluster in Ohio: competitive factors and wood use estimates

    Science.gov (United States)

    Matthew Bumgardner; Robert Romig; William Luppold

    2008-01-01

    This paper is an assessment of wood use by the Amish furniture cluster located in northeastern Ohio. The paper also highlights the competitive and demographic factors that have enabled cluster growth and new business formation in a time of declining market share for the overall U.S. furniture industry. Several secondary information sources and discussions with local...

  17. FEA analysis and design optimization for a multifunctional piece of furniture

    Directory of Open Access Journals (Sweden)

    Haraga Georgeta

    2017-01-01

    Full Text Available The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with a solid modelling for the creation of the desired piece of multifunctional furniture is used in this case, the automatic generation of the finite element meshes. Getting more accurate results for the mesh refinement process can be made by changing parameters. The article outlines the developed model for analysing the supporting structure of the armchair. This model provides simulating of the different loads and checking the raised stresses and deformation in the structures analysed. The main objective of this research is to evaluate strength of wooden cedar armchair for a person weighing 140 kg and for this the finite element analysis (FEA has been used. Multifunctional furniture is the answer to the challenges contemporary lifestyle, creativity in design activities that require optimal space utilization and reducing costs.

  18. FEA analysis and design optimization for a multifunctional piece of furniture

    OpenAIRE

    Haraga Georgeta; Goanță Adrian Mihai

    2017-01-01

    The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA) application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with...

  19. The Effect of Differences Between User’ Characteristics and Socio-Economic Status on the Brand Furniture Preference

    OpenAIRE

    Arslan, Ali Rıza; DORUK, Şemsettin; BURDURLU, Erol

    2009-01-01

    The effect of product properties produced by physical production process and the brand created over communication and the brand perception on user (customer) demand is known reality. The brand behavior according as the brand perception changing owing to the customer properties. In this study, the effect of some user characteristics like age, sex, marital status, occupation, income state, residence, property state of their house on brand furniture preference was examined. A relevant questionna...

  20. The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

    Science.gov (United States)

    R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

    2003-01-01

    The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

  1. Improving the Signal for U.S. Navy Officer Productivity

    Science.gov (United States)

    2014-12-01

    American Economic Review, 93(1), 216–240. Retrieved from http://www.jstor.org/stable/3132169 Mankiw , G., Romer, D., & Weil, D. (1992). A contribution...individual perfonnance appraisal system to optimally signal officer productivity. This paper utilizes the economics literature on individual perfonnance...signal officer productivity. This paper utilizes the economics literature on individual performance appraisals and promotion systems as the lens

  2. 77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

    Science.gov (United States)

    2012-01-10

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  3. ANALISIS PENGUKURAN PRODUKTIVITAS PADA CV. CITRA JEPARA FURNITURE

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-02-01

    Full Text Available CV. Citra Jepara adalah perusahaan furnitur ekspor. Pada masa itu, perusahaan hanya melihat level keuntungan untuk mengkaji perusahaan telah berjalan lebih baik atau kebalikannya. Hasil persepsi membuat perusahaan hanya sedikit memperhatikan efisiensi pemakaian sumber daya yang dimiliki (input sehingga perusahaan membutuhkan biaya besar untuk melakukan aktivitas perusahaan.Penelitian ini mempelajari evaluasi produktivitas perusahaan dan pengukuran serta hubungan antara level produktivitas dengan level profitabilitas (kemampuan perusahaan untuk menciptakan laba yang dapat dicapai oleh perusahaan.Hasil penelitian ini tentang pengukuran produktivitas parsial memperlihatkan level produktivitas berubah-ubah dan masih memerlukan usaha peningkatan produktivitas parsial terutama dalam pemakaian masing-masing input dengan efisien. Level Total Factor Productivity selama perioda pengukuran memperlihatkan level pertumbuhan positif. Ini melukiskan perusahaan sukses dalam mengelola input tenaga kerja dan modal kolektif yang dimiliki. Level Total Productivity selama perioda pengukuran menunjukkan level pertumbuhan yang berubah-ubah. Ini melukiskan perusahaan itu belum dapat mengelola input yang dimiliki keseluruhan dengan sukses. Untuk melukiskan hubungan antara produktivitas total dengan profitabilitas dari hasil penelitian bisa diketahui faktor produktivitas (0,998 mempunyai pengaruh lebih besar dibandingkan pemulihan harga (0,457 untuk peningkatan profitabilitas perusahaan selama kurun waktu satu tahun perioda pengukuran. Diperlukan usaha untuk meningkatkan profitabilitas perusahaan untuk periode mendatang disertai usaha untuk meningkatkan produktivitas yang memusatkan pada peningkatan produktivitas material dan produktivitas modal sebagai input yang sangat mempengaruhi profitabilitas perusahaan dengan cara berkelanjutkan dan berkesinambungan. Kata kunci: pengukuran evaluasi dan produktivitas, profitabilitas    CV. Citra Jepara is an export furniture

  4. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Science.gov (United States)

    Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

  5. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    Science.gov (United States)

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

  6. Knowledge as a Critical Resource in Innovation among Small Furniture Companies in Indonesia: An Exploration

    Directory of Open Access Journals (Sweden)

    Marina van Geenhuizen

    2005-09-01

    Full Text Available The furniture industry makes a significant contribution to the Indonesian economy but is exposed to an intensifying competitive environment and to emerging shortages of raw material. These circumstances have prompted small furniture manufacturers in the district of Jepara to undertake several types of innovation. It appears that of all first ranked innovations, product innovation is the largest category. In the overall pattern of innovations, market innovation and logistics innovation are also important, a situation that can be explained by the typical character and current circumstances of the furniture industry in this area. The innovation process concerned mainly relies on traditional knowledge sources, namely in-house learning-by-doing and experimentation, and buyers (customers. However, the manufacturers show willingness to use other knowledge sources in the near future, particularly more formal and globally oriented ones, such as exhibitions, research institutions, and the Internet. What tends to hamper such progress is that the manufacturers’ capability to access these knowledge sources is limited by financial obstacles and to a smaller extent by complexity and language obstacles. The paper concludes with a few policy recommendations and potential directions of future research. One of the policy recommendations aims at a combination of the traditional way of knowledge generation through in-house learning-by-doing and experimentation with knowledge from modern and formal sources.

  7. Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

    Directory of Open Access Journals (Sweden)

    Rocio Astrid BERNAL

    2011-09-01

    Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

  8. Introduction of a method for presenting health-based impacts of the emission from products, based on emission measurements of materials used in manufacturing of the products

    Energy Technology Data Exchange (ETDEWEB)

    Jørgensen, Rikke Bramming, E-mail: rikke.jorgensen@iot.ntnu.no

    2013-11-15

    A method for presenting the health impact of emissions from furniture is introduced, which could be used in the context of environmental product declarations. The health impact is described by the negative indoor air quality potential, the carcinogenic potential, the mutagenic and reprotoxic potential, the allergenic potential, and the toxicological potential. An experimental study of emissions from four pieces of furniture is performed by testing both the materials used for production of the furniture and the complete piece of furniture, in order to compare the results gained by adding emissions of material with results gained from testing the finished piece of furniture. Calculating the emission from a product based on the emission from materials used in the manufacture of the product is a new idea. The relation between calculated results and measured results from the same products differ between the four pieces of furniture tested. Large differences between measured and calculated values are seen for leather products. More knowledge is needed to understand why these differences arise. Testing materials allows us to compare different suppliers of the same material. Four different foams and three different timber materials are tested, and the results vary between materials of the same type. If the manufacturer possesses this type of knowledge of the materials from the subcontractors it could be used as a selection criterion according to production of low emission products. -- Highlights: • A method for presenting health impact of emissions is introduced. • An experimental study of emissions from four pieces of furniture is performed. • Health impact is calculated based on sum of contribution from the materials used. • Calculated health impact is compared to health impact of the manufactured product. • The results show that health impact could be useful in product development and for presentation in EPDs.

  9. STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA)

    OpenAIRE

    Apriyanti Apriyanti

    2014-01-01

    The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

  10. Strategi Aliansi dalam Menghadapi Globalisasi (Study pada Perusahaan Furniture di Kabupaten Jepara)

    OpenAIRE

    Apriyanti, Apriyanti

    2014-01-01

    The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can't fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

  11. The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

    Directory of Open Access Journals (Sweden)

    Tomas Baltuška

    2016-04-01

    Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

  12. Aim for Wow-ability when Selecting Student Center Furniture.

    Science.gov (United States)

    Payne, Jill M.

    2003-01-01

    Advises colleges to keep in mind several qualities when purchasing furniture for student centers: durability, cleanability, repairability, flexibility, storability, credibility, sustainability, comfort, affordability, and "wowability." (EV)

  13. 46 CFR 169.323 - Furniture and furnishings.

    Science.gov (United States)

    2010-10-01

    ... of fire resistant materials. (b) Existing solid wooden furniture may be retained on existing vessels. (c) Draperies must be fabricated of fire resistant fabrics. (d) Rugs and carpets must be of wool or other material having equivalent fire resistant qualities. (e) Trash receptacles must be constructed of...

  14. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry

    Science.gov (United States)

    Black, A.; Evans, J. C.; Hadfield, Esme H.; Macbeth, R. G.; Morgan, A.; Walsh, M.

    1974-01-01

    Black, A., Evans, J. C., Hadfield, Esme H., Macbeth, R. G., Morgan, A., and Walsh, M. (1974).British Journal of Industrial Medicine,31, 10-17. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry. Measurements of mucociliary clearance from the anterior end of the middle turbinate were made using technetium-99m-labelled particles in nine woodworkers from the furniture industry and in 12 controls, none of whom had been occupationally exposed to wood dust. Clearance rates in the controls ranged from 1·9 to 18·5 mm min-1 with a mean of 6·8. These values are in good agreement with measurements reported elsewhere for normal subjects. Only one of the woodworkers had a clearance rate which fell within the normal range and he had been occupationally exposed for the shortest period (6 years). In four woodworkers clearance was very slow (furniture industry for more than 10 years. PMID:4821406

  15. 75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-11-26

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  16. 75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-02-05

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  17. 76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-10-24

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  18. Sistem Dinamis Industri Furniture Indonesia Dari Perspektif Supply Chain Management Yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2010-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  19. Sistem Dinamis Industri Furniture Indonesia dari Perspektif Supply Chain Management yang Berkelanjutan

    OpenAIRE

    Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

    2012-01-01

    This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

  20. Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

    Science.gov (United States)

    Furniture Industry Research Association, Stevenage (England).

    A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

  1. Certificação florestal e o mercado moveleiro nacional Forest certification and furniture national market

    Directory of Open Access Journals (Sweden)

    Ricardo Ribeiro Alves

    2009-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a inserção da certificação florestal no mercado moveleiro nacional. Para a realização deste estudo, utilizaram-se dados do Conselho de Manejo Florestal (FSC Brasil e dados obtidos por meio de questionários aplicados às empresas moveleiras que possuíam produtos certificados. A certificação mostrou-se presente nas empresas do Estado de São Paulo e da Região Sul, principalmente entre aquelas ligadas à exportação. As empresas da indústria moveleira voltadas para o mercado interno não demonstraram maior interesse na certificação florestal em função da baixa exigência dos clientes.The objective of this work was to evaluate the insertion of forest certification in the national furniture market. The data used for the accomplishment of the present study came from the Forest Stewardship Council (FSC Brazil and the questionnaires applied to the furniture companies with certified products. Companies in the State of São Paulo and in the South Region presented certification, mainly the exporting companies. The furniture companies intended to provide the domestic market did not demonstrate great interest in forest certification because customers did not demand it.

  2. FORMULATING ULTRA-LOW-VOC WOOD FURNITURE COATINGS

    Science.gov (United States)

    The article discusses the formulation of ultra-low volatile organic compound (VOC) wood furniture coatings. The annual U.S. market for wood coatings is about 240, 000 cu m (63 million gal). In this basis, between 57 and 91 million kg (125 and 200 million lb) of VOCs are emitted i...

  3. FINANCIAL LIQUIDITY OF THE FURNITURE INDUSTRY COMPANIES IN POLAND IN 2006–2013

    Directory of Open Access Journals (Sweden)

    Zbigniew Gołaś

    2015-12-01

    Full Text Available The aim of the study was to present the diversity and conditions of companies’ liquidity in the Polish furniture industry. In the analysis, the statistical data, CSO, 2006–2013 for the furniture manufacturing enterprise sector (Chapter 31 manufacturing, PKD 2007 was used. The carried out analysis showed that the furniture industry companies in Poland in the years 2006–2013 in general had the ability to meet their current liabilities. Current and quick liquidity developed for them on a stable and positive level, coinciding with the recommendations of the theory of fi nance. However, from the working capital cycle’s point of view, the assessment of liquidity furniture manufacturing sector is clearly less favourable, and it results from relatively long collecting dues cycles ranging close to 60 days. The less favourable assessment comes from the fact that the long collecting dues cycles have eff ects on exceeding duration of the recovery measures’ applications, which in turn, may turn into a build-up of the payment backlogs, and thus into reductions of the ability to fi nance business and into the risk of production’s reduction

  4. The investigation of the relationship between the job satisfaction and job performance of employees in furniture sector

    Directory of Open Access Journals (Sweden)

    Türkay Türkoğlu

    2017-04-01

    Full Text Available Manpower and performance of employees in furniture industry plays an important role in the quality of the products. It is necessary to ensure the job satisfaction of employees to achieve their high performance. “The Minnesota Job Satisfaction Scale” and “the Job Performance Scale” were used as data collection tools in the study. Therefore, questionnaire form was conducted on 362 employees of furniture sector. Obtained data was analyzed in SPSS program by means of Correlation and Regression Analyses, t-test and ANOVA. The result of the study shows that there is a strong relationship between job satisfaction and employees performance. While there were significant differences in job satisfaction and job performance in term of some employees’ demographic characteristics such as gender, age, educational status and seniority, it wasn’t found significant difference in marital status.

  5. Desain Dan Implementasi Augmented Reality Berbasis Web Pada Aplikasi Furniture Shopping Manager Sebagai Alat Bantu Belanja Online

    OpenAIRE

    Pramono, Basworo Ardi

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya. FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online. Aplikasi FSM dikembang...

  6. DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

    OpenAIRE

    Basworo Ardi Pramono

    2012-01-01

    Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dike...

  7. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  8. Evaluation of Airborne MDF Dust Concentration in Furniture Factories

    Directory of Open Access Journals (Sweden)

    Renilson Luiz Teixeira

    2017-10-01

    Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

  9. Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

    Science.gov (United States)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    2017-05-01

    To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (>4 mg m-3) and one with 'low' (joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P joineries, a borderline statistically significant (P joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  10. The Importance of Methodology Evaluation of School Furniture for Czech Children with Mobility Disability in Relation to Children’s Anthropometry

    Directory of Open Access Journals (Sweden)

    Martin Zach

    2014-01-01

    Full Text Available The paper presents results of research conducted under the support of the IGA LDF MENDELU project, id. No. 32/2010 (Anthropometry in Disabled Children in Relation to Furniture and the NIS MPO ČR FR-TI1/050 project (Information System for the Support of Research, Development, Innovation and Furniture Quality. It gives an account of theoretical and methodological foundations, introduces the project’s research objectives. Its major objective is to familiarise professional public with the results of the conducted research the focus of which was to determine requirements for furniture designated for children with mobility restrictions. The defined requirements then constitute the grounds of school furniture assessment methodology. These requirements are divided into three levels that are somehow interconnected. Application of the methodology as a whole is highly wide and can be directed at all educational institutions in the Czech Republic with the pupils from the target group. The evaluation outcome is a report of each evaluated product. The questions raised also belong to a broader context of the issue at hand, related to the project of protection and safety standards establishment in relation to health status of children and youth, in the context of the “Long-term programme of the improvement of health status of the Czech Republic population – Health for everybody in the 21st century” paper, objective 4: HEALTH OF YOUTH – TO BUILD CONDITIONS FOR YOUNG PEOPLE TO BECOME HEALTHIER AND APTER TO FULFILL THEIR ROLE IN THE SOCIETY BY 2020. It is recommended to make a proper definition of the dimensional characteristics of children and update their measurements for furniture design in the Czech Republic constantly (including revision of technical regulations and innovation dimensions in the literature. This can be considered as an opportunity to improve the health of future generations.

  11. Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

    Science.gov (United States)

    Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

    2017-09-01

    This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

  12. Mr Drage, Mr Everyman, and the creation of a mass market for domestic furniture in interwar Britain

    OpenAIRE

    Peter Scott

    2007-01-01

    This paper examines strategies used by durable goods retailers to create a mass market in interwar Britain, via a case-study of domestic furniture. Interwar demand for new furniture witnessed particularly rapid growth - mainly owing to the extension of the market to lower-income groups. A number of innovative national retailers eveloped liberal HP facilities to bring furniture within the economic reach of these groups, while sophisticated national advertising campaigns were used to both legit...

  13. 75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2010-07-29

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  14. 77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2012-08-27

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  15. 75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-12-30

    ..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  16. 76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2011-08-11

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  17. 76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

    Science.gov (United States)

    2011-11-03

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  18. Human communication needs and organizational productivity: the potential impact of office automation.

    Science.gov (United States)

    Culnan, M J; Bair, J H

    1983-05-01

    Much of what white collar workers do in offices is communication-related. White collar workers make up the majority of the labor force in the United States today and the majority of current labor costs. Because office automation represents more productive structured techniques for handling both written and oral communication, office automation therefore offers the potential to make organizations more productive by improving organizational communication. This article: (1) defines communication, (2) identifies the potential benefits to be realized from implementing office automation, and (3) offers caveats related to the implementation of office automation systems. Realization of the benefits of office automation depends upon the degree to which new modes of communication may be successfully substituted for traditional modes.

  19. 75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

    Science.gov (United States)

    2010-04-14

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  20. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

  1. Aspects of the furniture industry in Ireland

    OpenAIRE

    Heanue, Kevin

    2009-01-01

    This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

  2. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2013-10-02

    ... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

  3. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence or? the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...

  4. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...

  5. Does Saudi school furniture meet ergonomics requirements?

    Science.gov (United States)

    Ramadan, Mohamed Zaki

    2011-01-01

    The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

  6. Impact of ventilation rates on SBS symptoms and productivity in offices

    DEFF Research Database (Denmark)

    Wargocki, Pawel; Fanger, Povl Ole

    1999-01-01

    Perceived air quality, Sick Building Syndrome (SBS) symptoms and productivity were studied in a normally furnished office space ventilated with an outdoor air flow of 3, 10 and 30 L/s per person (corresponding to aiur changes of 0.6, 2.0 and 6 h-1, respectively), while all other environmental...... subjects occupied the office for 4.6 hours in the afternoon, six subjects at a time; they remained thermally neutral by adjusting their clothing. Subjects assessed perceived air quality and SBS symptoms, and performed simulated office work so that their productivity could be assessed. Increasing the supply...

  7. 76 FR 57713 - Wooden Bedroom Furniture From the People's Republic of China: Amended Final Results of...

    Science.gov (United States)

    2011-09-16

    ... appearance on behalf of Liberty Furniture Industries Inc. (``Liberty'') on August 17, 2011. The law firm also... Department: (1) Left out the word ``Dongguan'' when it listed the entity ``Dongguan Cambridge Furniture Co., Ltd., Glory Oceanic Co., Ltd.'' (``Cambridge'') in the rate table of the Final Results; (2) did not...

  8. A producer survey on Turkish furniture industry

    OpenAIRE

    Öğün, Emir Polat

    1996-01-01

    Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

  9. Bending stress modeling of dismountable furniture joints applied with a use of finite element method

    Directory of Open Access Journals (Sweden)

    Milan Šimek

    2009-01-01

    Full Text Available Presented work focuses on bending moment stress modeling of dismountable furniture joints with a use of Finite Element Method. The joints are created from Minifix and Rondorfix cams combined with non-glued wooden dowels. Laminated particleboard 18 mm of thickness is used as a connected material. The connectors were chosen such as the most applied kind in furniture industry for the case furniture. All gained results were reciprocally compared to each other and also in comparison to experimental testing by the mean of stiffness. The non-linear numerical model of chosen joints was successfully created using the software Ansys Workbench. The detailed analysis of stress distribution in the joint was achieved with non-linear numerical simulation. A relationship between numerical si­mu­la­tion and experimental testing was showed by comparison stiffness tangents. A numerical simulation of RTA joint loads also demonstrated the important role of non-glued dowels in the tested joints. The low strength of particleboard in the tension parallel to surface (internal bond is the most likely the cause of the joint failure. Results are applicable for strength designing of furniture with the aid of Computer Aided Engineering.

  10. Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2016-04-01

    Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

  11. Cigarette Fires Involving Upholstered Furniture in Residences: The Role that Smokers, Smoker Behavior, and Fire Standard Compliant Cigarettes Play

    Science.gov (United States)

    Butry, David T.; Thomas, Douglas S.

    2017-01-01

    Residential structure fires pose a significant risk to life and property. A major source of these fires is the ignition of upholstered furniture by cigarettes. It has long been established that cigarettes and other lighted tobacco products could ignite upholstered furniture and were a leading cause of fire deaths in residences. In recent years, states have adopted fire standard compliant cigarettes (‘FSC cigarettes’) that are made with a wrapping paper that contains regularly spaced bands, which increases the likelihood of self-extinguishment. This paper measures the effectiveness of FSC cigarettes on the number of residential fires involving upholstered furniture, and the resulting fatalities, injuries, and extent of flame spread, while accounting for the under-reporting of fire incidents. In total, four models were estimated using fire department data from 2002 to 2011. The results provide evidence that FSC cigarettes, on average, reduced the number of residential fires by 45 %, reduced fatalities by 23 %, and extent of flame spread by 27 % in 2011. No effect on injuries was found. Within each state, effectiveness is moderated by the number of smokers and their consumption patterns. In general, FSC cigarettes are more effective in places with a large smoking population who engage in heavier smoking. There is a very limited effect on the lightest of smokers, suggesting behavioral differences between heavy and light smokers that influence fire risk. PMID:28751788

  12. Outbreak of eczema and rhinitis in a group of office workers in Greenland

    DEFF Research Database (Denmark)

    Ebbehøj, Niels E; Agner, Tove; Zimerson, Erik

    2015-01-01

    INTRODUCTION: Disturbed indoor climate may in some cases be associated with illness. In the present paper, we report the results from a thorough investigation of office workers in Greenland, who developed skin and/or airway problems after moving into renewed offices. MATERIAL AND METHODS: In 2009...... the office of the Bank of Greenland had a total renovation of the building, including new furniture and carpets. Symptoms developed within the first year after moving back into the renewed buildings. After removal of carpets in the building, symptoms significantly improved. Workers were examined in 2009......: In total, 32 out of 80 workers (40%) developed symptoms; 27 reported eczema, 20 rhinitis and 4 urticaria. Eczema was located on the hands and/or lower arms in 18 workers, on the face in 10 workers and on legs/trunk in 12 workers. After intervention in the office, 22 workers with eczema reported significant...

  13. Analisis Praktik Corporate Social Responsibility Perusahaan Furniture di Kabupaten Jepara

    Directory of Open Access Journals (Sweden)

    Aida Nahar

    2015-12-01

    Full Text Available Corporate social responsibility (CSR is a transparent business practices, which are based on ethical values, with particular attention to employees, communities and the environment, and designed to meet the wishes of the shareholders and the public in general. Effort to understand and analyze the practice of CSR in a company is interesting, considering the practice of CSR is not a uniform practice and its implementation is highly dependent on the unique characteristics inherent in the company. The purpose of this study is to investigate to find out the practice of Corporate Social Responsibility by furniture companies in Jepara. Data collection methods used in this study were interviews, direct observation, and analysis of company documents. Data were analyzed by triangulation and interpretation. From the research conducted it can be concluded that the comapany’s motivation in implementing CSR undertaken by the company from Jepara regency furniture is the company’s commitment and enhance the reputation of the company. While the practice of CSR that have been made furniture enterprises in Jepara regency consists of several fields, namely a. economy, including internal and external sectors. Internal sector is focused on training programs for employees. The external sector was focused on facilitating the community development patterns, community groups, and cooperatives. b. Social areas, including the provision of public facilities (infrastructure development, social welfare, education and sports. c. Environment areas, including sustainable water supply.

  14. AN INVESTIGATION ON THE CUSTOMER RELATIONSHIP MANAGEMENT IN FURNITURE STORES

    Directory of Open Access Journals (Sweden)

    İlker Akyüz

    2004-11-01

    Full Text Available The most valuable thing for corporations is customers in today’s competitive environment. The evaluation obtained with suitable methodology is important vitally in the success of customer relationship management systems applied for the continuous customer satisfaction and devotion. Continuous customer satisfaction, development of communication skills with customers, caring with customers’ desires and compliments before and after sale just in sale time, development of the quality of services being offered to the customers is dependent on the determining customer problems closely and giving customer focused services. In this study, it was tried to reveal the customer relationship management, communication with customer, customer focused sale offered before, after and just in sale time in some furniture stores located in Trabzon. It was found that the furniture stores in Trabzon have been generally trying to give customer focused sale services

  15. Analysis of the most relevant anthropometric dimensions for school furniture selection based on a study with students from one Chilean region.

    Science.gov (United States)

    Castellucci, H I; Arezes, P M; Molenbroek, J F M

    2015-01-01

    Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  16. DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

    Science.gov (United States)

    The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

  17. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  18. Contact allergy to finished woods in furniture and furnishings: a small allergic contact dermatitis epidemic to western red cedar in sauna interior decoration.

    Science.gov (United States)

    Huilaja, L; Kubin, M E; Riekki, R

    2016-01-01

    Allergic contact dermatitis caused by wood dust remains uncommon and most cases are occupational. Contact allergy to finished wooden products is even more rare and only few cases of contact dermatitis to wooden furnishings and furniture are described. During 2012-2014 surprisingly many patients with dermatitis associated to sauna baths were referred to our clinic. We report three novel cases with allergic contact dermatitis to western red cedar due to exposure during sauna baths. Three cases of non-occupational contact dermatitis to western red cedar were confirmed by patch testing. Allergic contact dermatitis to interior decoration or furniture is a rarity, but can be induced by novel exposures, like western red cedar in sauna interior decoration. © 2015 European Academy of Dermatology and Venereology.

  19. Special report. New products that improve officer performance, safety.

    Science.gov (United States)

    1991-12-01

    The need for products that improve performance of security officers is counterbalanced these days by budgetary constraints. While this may limit major investments in security systems and personnel, less costly improvements or innovations might be worth considering. In this report, we will discuss four advances that may be valuable not only in hospital security, but in other industries as well. One of them, a smoke filter, was originally developed for the hotel industry. Another, a drug detection device, may replace the use of undercover agents or drug-sniffing' dogs in certain circumstances. The third new product is an economical patrol vehicle for parking facilities which might replace more costly vehicles such as golf carts or cars. The fourth product, a roving CCTV camera, is actually being tested at a Midwest medical center and may allow you to monitor areas of parking garages with cameras instead of officers on patrol.

  20. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    Science.gov (United States)

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  1. Attitudes of U.S. retailers toward China, Canada, and the United States as manufacturing sources for furniture: an assessment of competitive priorities

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Torsten Lihra; Mary Frye

    2006-01-01

    While much has been written regarding the declining global competitiveness of U.S. furniture manufacturing and the subsequent loss of domestic market share and jobs, less is known about the role of retailers in furniture importing. This study investigated the attitudes of U.S. furniture retailers toward China, Canada, and the United States as manufacturing sources for...

  2. A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

    OpenAIRE

    and Shalihuddin Djalal Tandjung, Muh. Hisjam Adi Djoko Guritno

    2012-01-01

    Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions fo...

  3. Auctions API

    Data.gov (United States)

    General Services Administration — GSA Auctions offers Federal personal property assets ranging from common place items (such as office equipment and furniture) to more select products like scientific...

  4. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  5. Static analysis of an office desk construction

    Directory of Open Access Journals (Sweden)

    Milan Novotný

    2011-01-01

    Full Text Available The objective of the paper is a static analysis of a desk construction and the determination of its probable mechanical behaviour using Finite Element Method. The construction was modelled and numerically analysed in Autocad Inventor 2011 and the stability of the entire desk was calculated with the size and placement of the loading force based on the standards and cited literature. Possible locations and directions of the deformation were analysed and a solution for its prevention was proposed and the stability of the desk as well as the extreme position of the stand were calculated. The verification of the obtained results in an accredited furniture testing lab is planned using a prototype of the office desk.

  6. Prevent Tipping Furniture from Injuring or Killing Young Children

    Science.gov (United States)

    ... more upsetting than the sudden death of a child — killed by a piece of a furniture, appliance or a television falling on them. “It can happen in a ... be secured. Check with home improvement stores or child retail stores and ask experts what they ... television and computer equipment low to the ground. Do ...

  7. Analysis of black japanned furniture by XRF

    Energy Technology Data Exchange (ETDEWEB)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P., E-mail: valter.felix@ifrj.edu.br, E-mail: renato.freitas@ifrj.edu.br, E-mail: annalecastro@hotmail.com [Instituto Federal do Rio de Janeiro (LISCOMP/IFRJ-CPAR), Paracambi, RJ (Brazil). Lab. de Instrumentação e Simulação Computacional; Pereira, Marcelo O.; Carvalho, Cristiano S.; Silva, Fabricio L., E-mail: marcelocefetrj@gmail.com [Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET), Nova Iguaçu, RJ (Brazil)

    2017-07-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  8. Analysis of black japanned furniture by XRF

    International Nuclear Information System (INIS)

    Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P.

    2017-01-01

    Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

  9. Development of Phanan Pandanus Handicraft Design for the Furniture Industry in Promotion of Creative-Based Economy

    Directory of Open Access Journals (Sweden)

    Payomrat Ruangrit

    2015-11-01

    Full Text Available This research study is a qualitative research which aims to (1 study the background of Phanan pandanus weaving handicraft, (2 study the problems encountered in development of Phanan pandanus weaving handicraft for the furniture industry, and (3 determine appropriate ways to develop suitable pandanus handicraft designs to promote the creative economy. The target area of this research was composed of three Thai provinces; Trang, Krabi and Satun. The research methods were study of books and printed matters, observation, interviews, group discussions and a workshop. The research findings revealed that the background and current status of Phanan pandanus weaving in each target group was similarly initiated as an ancestral legacy. Learning skill was acquired through observation without any particular textbooks. The learning activity was first started with small groups, which were extended into large groups with 20-30 members. The average age of group members is 40 years and older, with educational levels between Prathom 6 (upper primary to Mathayom 6 (upper secondary. The products made by each group are similar. In terms of the marketplace, each group aims at the domestic market. Each member earns approximately 2,500-6,000 baht per month. In terms of the problems of Phanan pandanus weaving, handicraft production mainly suffers from a lack of designers, lack of support from the government sector, unaffordable costs of hiring designers, lack of creativity in producing new products and inability to produce large quantities of products due to time consumption. According to the research findings, there are 3 guideline areas for development of Phanan pandanus handicraft design for the furniture industry in promotion of creative-based economy: (1 Guidelines for development of pandanus handicraft design; (2 Guidelines for management; (3 Guidelines for the incorporation of other equipment and materials.

  10. Utilization trend of wood species utilized in furniture industry in ...

    African Journals Online (AJOL)

    The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

  11. Prioritization of Wood Species Utilized for Furniture Making in ...

    African Journals Online (AJOL)

    The preference for wood species varied among the three cities and among the three scales of furniture factories. However, Mansonia altissima was most preferred in the three cities with rates of 99.0%, 97.4% and 97.7% in Lagos, Ibadan and Benin respectively. 39 wood species were compiled from the lists of the three cities ...

  12. 76 FR 13228 - Steelcase, Inc., North America Division, Including On-Site Leased Workers From Manpower, Inc...

    Science.gov (United States)

    2011-03-10

    ... subject firm. The workers are engaged in the production of office furniture. The review shows that on... workers of Steelcase, Inc., Global Headquarters, Grand Rapids, Michigan, separated from employment on or...

  13. Spatial Determinants on Export marketing activity in Marshallian Districts: An investigation of the Danish Furniture Industry

    DEFF Research Database (Denmark)

    Andersen, Poul Houman

    2002-01-01

    The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?......The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?...

  14. The Determinants of Employee Productivity in Regional Office of Bank Negara Indonesia Manado

    OpenAIRE

    Mokolensang, Pricilia Monica

    2013-01-01

    A company can achieve success when supported with a good employee productivity that can provide benefits to the company. In banking company such as BNI requires to increase employee productivity that can assist the company in the achievement of the goals of the company itself. This research has the objective to know the factors that drive employee productivity in the Regional Office of BNI Manado. The population examined is all the employees who work in Regional Office of BNI Manado with 70 e...

  15. Achievements of the ITB's--Furniture and Timber Industry Training Board

    Science.gov (United States)

    Industrial Training International, 1974

    1974-01-01

    The Furniture and Industry Training Board set out in 1965 to find a means of successfully implementing management training in small firms. The author describes research efforts undertaken by the Board which led to the development of the training program now in use--management development based on company appraisal. (AJ)

  16. Use of Augmented Reality in the furniture industry

    OpenAIRE

    Carvalho, Elizabeth, Simão; Maçães, Gustavo; Brito, Paulo; Varajão, Isabel; Sousa, Nuno

    2011-01-01

    The architects conceive the interior visual aspect of a house based on sketches and drawings. These drawing schemes are perfectly understandable by technicians that are responsible for their implementation, but to the client, most of the time, they seem somewhat unrealistic and ungraspable in terms of visual model. This issue is especially sensitive when the inner components are actually pieces of different kinds of furniture and other decoration stuff. The ideal situatio...

  17. Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

    Science.gov (United States)

    González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

    2012-06-01

    The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Analysis of school furniture used in computer classrooms

    OpenAIRE

    Jiří Tauber

    2011-01-01

    With the respect to the fast development of new computer technologies, it is unconditionally necessary that school furniture reflected this trend and adapted to it. Our use of computer technologies and utilities in teaching is increasing. Therefore, it is necessary to improve school desks so that they would be fit for new computer technology. Creation of a compact set of information relative to the issue concerned, which would comprise of needs and requirements for individual pieces of furnit...

  19. Physical and chemical evaluation of furniture waste briquettes

    OpenAIRE

    Moreno Caballero, Ana Isabel; Font, Rafael; Conesa, Juan A.

    2016-01-01

    Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified m...

  20. Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

    Science.gov (United States)

    Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

    2006-01-01

    Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

  1. Marketing low-grade hardwoods for furniture stock - a new approach

    Science.gov (United States)

    Hugh W. Reynolds; Charles J. Gatchell

    1979-01-01

    A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

  2. Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method

    Directory of Open Access Journals (Sweden)

    Ali Darijani

    2012-01-01

    Full Text Available Adequate conducting studies on site selection will have economic impact on performance of industrial firm; besides the effects of social, environmental, cultural and economic in their area. Also, the regional characteristics as key factors in determining where to locate the problem is that it creates incentives for public, private and cooperative sectors for investing on that place. Determining the effective indices in furniture industry to set sellers' view is the aim of this study that conducted in North Khorasan province, Iran in 2010. After reviewing literatures and interviews, the effecting factors were identified and classified into five main groups; "materials and products", "infrastructure", "mortal", "economic" and "rules and regulations". Value of weighted indices determined by getting comments from experienced furniture sellers as well as using Analytical Hierarchy Process (AHP applied and flexible technique by Expert Choice software. The results showed that materials, distance to market, existing invertors indices with value-weighted 0.126, 0.114 and 0.099, respectively had highest priority.

  3. STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

    OpenAIRE

    Radu Marginean

    2013-01-01

    The global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as s...

  4. Macroergonomic analysis of an assembly sector of a furniture company.

    Science.gov (United States)

    Cristiane, A A Z; Danielle, M D; Vanessa, C B

    2012-01-01

    From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

  5. Do facilities matter? : The influence of facility satisfaction on perceived labour productivity of office employee

    NARCIS (Netherlands)

    Batenburg, RS; van der Voordt, Theo

    2008-01-01

    Purpose: Companies spend a lot of money to provide facilities such as a nice, effective and efficient building, well designed ergonomic furniture, sophisticated IT, cleaning services, catering, and safety services. Both from a theoretical perspective as well as from a managerial point of view, it is

  6. PERFORMANCE ANALYSIS ON FREIGHT TRANSPORTATION IN FURNITURE INDUSTRY, A CASE STUDY IN BANTUL, YOGYAKARTA, INDONESIA

    Directory of Open Access Journals (Sweden)

    C. H. Soekamto

    2012-06-01

    Full Text Available The Supply Chain Management is a new philosophy encouraging internal and external integration which encompass all the aspects, from the supplier until down to the customers. Transportation plays a major role in achieving efficiency and effectiveness because the role of transportation in the Supply Chain is as the intermediary help to distribute the physical goods from one entity to another entity.  For this reason, the objective of this research is to analyse and measure the effectiveness and efficiency of inbound and outbound logistics in the furniture industry in Bantul, Yogyakarta. Firstly, the author will try to draw the supply chain mapping in order to gain more understanding about the entities in the supply chain.  Secondly, performance of the transportation modes that will be used to move the furniture will be assessed through questionnaire. Thirdly, the author will try to analyse the response if rail transportation is proposed as an alternative transportation mode to move the goods. Lastly, conclusion and recommendation regarding the issue will be derived as implied in the result from data analysis. Keywords: Supply chain management, transportation, performance, furniture industry.

  7. EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

    OpenAIRE

    GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

    2014-01-01

    In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

  8. Effect of office ergonomics intervention on reducing musculoskeletal symptoms.

    Science.gov (United States)

    Amick, Benjamin C; Robertson, Michelle M; DeRango, Kelly; Bazzani, Lianna; Moore, Anne; Rooney, Ted; Harrist, Ron

    2003-12-15

    Office workers invited and agreeing to participate were assigned to one of three study groups: a group receiving a highly adjustable chair with office ergonomics training, a training-only group, and a control group receiving the training at the end of the study. To examine the effect of office ergonomics intervention in reducing musculoskeletal symptom growth over the workday and, secondarily, pain levels throughout the day. Data collection occurred 2 months and 1 month before the intervention and 2, 6, and 12 months postintervention. During each round, a short daily symptom survey was completed at the beginning, middle, and end of the workday for 5 days during a workweek to measure total bodily pain growth over the workday. Multilevel statistical models were used to test hypotheses. The chair-with-training intervention lowered symptom growth over the workday (P = 0.012) after 12 months of follow-up. No evidence suggested that training alone lowered symptom growth over the workday (P = 0.461); however, average pain levels in both intervention groups were reduced over the workday. Workers who received a highly adjustable chair and office ergonomics training had reduced symptom growth over the workday. The lack of a training-only group effect supports implementing training in conjunction with highly adjustable office furniture and equipment to reduce symptom growth. The ability to reduce symptom growth has implications for understanding how to prevent musculoskeletal injuries in knowledge workers.

  9. Prediction of fire growth on furniture using CFD

    Science.gov (United States)

    Pehrson, Richard David

    A fire growth calculation method has been developed that couples a computational fluid dynamics (CFD) model with bench scale cone calorimeter test data for predicting the rate of flame spread on compartment contents such as furniture. The commercial CFD code TASCflow has been applied to solve time averaged conservation equations using an algebraic multigrid solver with mass weighted skewed upstream differencing for advection. Closure models include k-e for turbulence, eddy breakup for combustion following a single step irreversible reaction with Arrhenius rate constant, finite difference radiation transfer, and conjugate heat transfer. Radiation properties are determined from concentrations of soot, CO2 and H2O using the narrow band model of Grosshandler and exponential wide band curve fit model of Modak. The growth in pyrolyzing area is predicted by treating flame spread as a series of piloted ignitions based on coupled gas-fluid boundary conditions. The mass loss rate from a given surface element follows the bench scale test data for input to the combustion prediction. The fire growth model has been tested against foam-fabric mattresses and chairs burned in the furniture calorimeter. In general, agreement between model and experiment for peak heat release rate (HRR), time to peak HRR, and total energy lost is within +/-20%. Used as a proxy for the flame spread velocity, the slope of the HRR curve predicted by model agreed with experiment within +/-20% for all but one case.

  10. Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

    Science.gov (United States)

    David G. Marten; David G. Marten

    1986-01-01

    Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

  11. Designing Business System Model using System Modeling Approach to the Small and Medium Enterprises (SME) of Furniture in Indonesia

    Science.gov (United States)

    Sukendar, Irwan; Fatmawati, Wiwiek; Much Ibnu Subroto, Imam; Arigama, Rizki

    2017-04-01

    This paper studies the design of business system model with System Modeling Approach on small and medium enterprises (SMEs) of furniture. Methods used consists of five phases: phase of identification of business processes actual on SMEs of Furniture, phase of identification of deficiencies and improvement of business processes, phase of design algorithm and flowchart business processes, phase of analysis of the elements of the system, and phase of the design of data flow diagram (DFD), The results of the analysis of the elements of the system are: Products and quantities ordered product consumers and DP paid by consumers identified as elements of system inputs 1,2 and 3. The result of the calculation, payment slips and mail order (SO) are identified as elements of system output 1, 2 and 3. Acceptance of orders, stocks checking of raw materials at the warehouse, calculating raw material requirements, adequacy of raw materials, the price of the contract, and the due date, as well as the submission of the results of calculations to consumers were identified as elements of system components 1, 2, 3, and 4. Admin taking orders, Admin check stocks of raw materials at the warehouse, Admin making calculation, and Admin convey the results of calculations to consumers were identified as an element of interaction system 1, 2, 3, and 4. Consumers were identified as element of environmental systems. Moreover, the boundary between SMEs and consumers were identified as elements of the system boundary.

  12. Bellus Furniture lõi edetabelis platsi puhtaks võimsa kasvuga / Aarne Mäe

    Index Scriptorium Estoniae

    Mäe, Aarne, 1967-

    2006-01-01

    Äripäeva koostatud Lääne-Viru ettevõtjate TOP-is troonis esikohal Haljalas tegutsev pehmemööbli firma Bellus Furniture, järgnesid Vest-Woodi puidutööstus Rakveres ja Kunda tsemenditehas. Lisa: Pingerida

  13. The Furniture Industry In Londrina A Indústria de Móveis em Londrina

    Directory of Open Access Journals (Sweden)

    Marcia Regina Gabardo da Câmara

    2004-11-01

    Full Text Available The Brazilian furniture industry is organized in clusters. Cluster is an agglomerate of located companies in a certain area that you/they develop their activities in an articulate way and with a logic in common and whose dynamics depends on the fact that those companies accomplish similar activities, use specific labor and raw materials, etc. inducing interaction and synergy, due to articulated performance, they provide to the group of companies competitive advantages that are reflected in an differentiated performance. The companies agglomerated geographically, mainly SMEs - small and medium enterprises - present success - greater competitiveness, generation of jobs, technological innovations, etc. In the area of Londrina - PR, there is a geographical agglomerate of companies producing of pieces of furniture, with prominence for the residential pieces of furniture and of office. The study tried to identify if the geographical gathering of furniture companies in the area corresponds or not to a cluster. A great potential was verified for the development of the same, due to the proximity with customers and suppliers and in relation to the available infrastructure of services. However, any form of cooperative action was not verified among companies or enter companies to develop complementary activities, it was not also verified any institution or support association for the companies. It is concluded that in the area of Londrina, the cluster is incipient because in spite of the gathering of companies, due to the low vertical links and absence of horizontal and multilateral links that characterize more advanced clusters, the synergetic effects of the gathering are not verified.A indústria moveleira brasileira está organizada em clusters. Cluster é um aglomerado de empresas localizadas em uma determinada região que desenvolvem suas atividades de forma articulada e com uma lógica em comum e cuja dinâmica pode ser determinada pelo fato dessas

  14. Pemanfaatan Limbah Sabut Kelapa pada Perencanaan Interior dan Furniture yang Berdampak pada Pemberdayaan Masyarakat Miskin

    Directory of Open Access Journals (Sweden)

    Titi Indahyani

    2011-04-01

    Full Text Available Coconut coir is one component of coconut that could be produced and decomposed into products needed by domestic or international market. Cocofiber and cocopeat are two derived products from coconut coir which through several researches could be produced into supporting material of interior and furniture, including matrass, bed sofa, and particle board like MDF, Coconut Fiber Board (CFB. Within this research, it is hoped to distribute the information about the functions and producing materials from coconut coir waste. This is supposed to be used by the government, minor industry, designer, and public to also apply and choose environment-friendly coconus coir material and sustain as a part of sustainable design, green design, social entrepreneurship and related programs. Therefore, coconut coir waste could be valued economically and has its positive effects to society who live around the coconut tree plantation area.  

  15. The study of postural workload in assembly of furniture upholstery

    Directory of Open Access Journals (Sweden)

    Marek Lasota Andrzej

    2017-01-01

    Full Text Available The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS with sampling. The results indicated that posture code 2111 (back code: 2 – bent forward; arms code: 1 – both below the shoulder joint; legs code: 1 – sitting position; load code: – 1 less than 10 kg was the most common working posture rating 38.1%; 63.9% of positions displayed non-neutral back postures and 52% received harmful action categories. The performed assembly tasks have an influence on harmless and harmful action categories. This study is crucial on assembly, and in the future work allows develop a framework for assessment the physical risk of WRMSDs in assembly.

  16. Perancangan Modular Furniture untuk Food Truck Penjual Makanan Indonesia

    OpenAIRE

    Sherly de Yong, Chetlyne Stefany Soekanto I Gusti Ngurah Ardana

    2016-01-01

    Food and beverage industry growth in Indonesia continues to develop, and need to be traded in location with dense occupants so that the business can be profitable. This has resulted in the emergence of the mobile system, as selling methods are much in demand today. Food vendors are mobile, requiring a furniture design that can support the activity of cooking and selling on a vehicle. By using Kembel design method, through the process of understanding, compressing, processing the data using de...

  17. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  18. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    Science.gov (United States)

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  19. Sustainable Competitive Advantage (SCA Analysis of Furniture Manufacturers in Malaysia: Normalized Scaled Critical Factor Index (NSCFI Approach

    Directory of Open Access Journals (Sweden)

    Tasmin Rosmaini

    2016-06-01

    Full Text Available The purpose of this paper is to investigate Malaysian furniture industry via Sustainable competitive advantages (SCA approach. In this case study, sense and respond method and Normalized Scaled Critical Factor Index (NSCFI are used to specify the distribution of companies’ resources for different criteria and detect the attributes which are critical based on expectation and experience of companies’ employs. Moreover, this study evaluates Malaysian furniture business strategy according to manufacturing strategy in terms of analyzer, prospector and defender. Finally, SCA risk levels are presented to show how much company’s resource allocations support their business strategy.

  20. Room temperature and productivity in office work

    Energy Technology Data Exchange (ETDEWEB)

    Seppanen, O.; Fisk, W.J.; Lei, Q.H.

    2006-07-01

    Indoor temperature is one of the fundamental characteristics of the indoor environment. It can be controlled with a degree of accuracy dependent on the building and its HVAC system. The indoor temperature affects several human responses, including thermal comfort, perceived air quality, sick building syndrome symptoms and performance at work. In this study, we focused on the effects of temperature on performance at office work. We included those studies that had used objective indicators of performance that are likely to be relevant in office type work, such as text processing, simple calculations (addition, multiplication), length of telephone customer service time, and total handling time per customer for call-center workers. We excluded data from studies of industrial work performance. We calculated from all studies the percentage of performance change per degree increase in temperature, and statistically analyzed measured work performance with temperature. The results show that performance increases with temperature up to 21-22 C, and decreases with temperature above 23-24 C. The highest productivity is at temperature of around 22 C. For example, at the temperature of 30 C, the performance is only 91.1% of the maximum i.e. the reduction in performance is 8.9%.

  1. New design competences for localized production systems

    DEFF Research Database (Denmark)

    Eriksen, Kaare Riise; Morelli, Nicola

    2005-01-01

    This paper discusses the current development in production culture, based on local production networks. The role of the designer is put in perspective and outlined through a research project, Den Grønne Møbel (DGM), where different design areas were coordinated in a business concept...... in fully industrialized countries such as Denmark and represents an interesting alternative to globalized industrial production. Furthermore this case is an interesting opportunity to re-discuss the role and competences of designers in such new models. Tools and methods of the design profession...... and an organization involving different stakeholders. For several years now, DGM has been producing furniture from local materials, hereby aiming to create a new culture for well designed and environmentally sound furniture with a ‘story’. Although not totally new, this organizational model is particularly innovative...

  2. Ergo-effects of designed school furniture and sitting positions on students behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions

    Directory of Open Access Journals (Sweden)

    A. I Musa

    2011-07-01

    Full Text Available Improper design of school furniture is one of the contributing factors to back pain among students as indicated in some studies. In the case of designing school furniture where sitting constitutes a considerable time in the school, seat becomes important for comfort. This study is carried out in three selected institutions in Nigeria to determine level of musculoskeletal disorder in students’ and the furniture that they use. 720 questionnaires with 240 students (120 boys and 120 girls drawn from each participating institutions were administered and 675 responses were received. The results show that the number of students having MSD, accounted for 93.75%. However, the distributions of pain in the body parts in each school were different. The musculoskeletal pain, mostly concentrated on neck, right shoulders right elbow right wrist right hand, upper back and lower back. The result also reveals that most of the students are sitting on chairs with seat that are too high and too deep or too shallow and of tables that are too high. However, it is recommended that further study on effect of designed school furniture and sitting position in larger sample of students’ representative in Nigeria tertiary institutions should be carried out in order to reduce the effect of body pains.

  3. THE ASSOCIATION BETWEEN OFFICE AUTOMATION AND IMPROVEMENT OF DECISION-MAKING AND PRODUCTIVITY OF EMPLOYEES OF YOUTH AND SPORT OFFICES OF WEST AZERBAIJAN PROVINCE, IRAN

    OpenAIRE

    Mostafa Mostafa pour; Ali Amini; Vadoud Shoshtary; Auoub Izadi; Yousef Esmayilian; Fatemeh Salami; Bager Khakpour

    2017-01-01

    The availability of precise, relevant, timely and new information increases the speed and precision of decision making. The objective of present study is to examine the association between office automation, improvement of decision-making and productivity of employees of Youth and Sport offices of West Azerbaijan Province. The statistical population of present study consists of 130 employees of Youth and Sport offices of West Azerbaijan Province selected through simple random sampling. The st...

  4. Wood Dust in Joineries and Furniture Manufacturing : An Exposure Determinant and Intervention Study

    NARCIS (Netherlands)

    Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

    Objectives: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop,

  5. Mental-Health Conditions, Barriers to Care, and Productivity Loss Among Officers in An Urban Police Department

    Science.gov (United States)

    Fox, Justin; Desai, Mayur M.; Britten, Karissa; Lucas, Georgina; Luneau, Renee; Rosenthal, Marjorie S.

    2014-01-01

    Background Police officers are frequently exposed to situations that can negatively impact their mental health. Methods We conducted this study of an urban police department to determine 1) the prevalence of post-traumatic stress disorder (PTSD), depression, and alcohol abuse; 2) patterns of and barriers to mental-health services utilization; and 3) the impact these conditions have on productivity loss. Results Among 150 officers, PTSD (24%), depression (9%), and alcohol abuse (19%) were common. Only 46.7% had ever sought mental-health services; the most commonly cited barriers to accessing services were concerns regarding confidentiality and the potential “negative career impact.” Officers with mental-health conditions had higher productivity loss (5.9% vs 3.4%, P police officers are common, and costly, yet most officers had never accessed mental-health services; many due to modifiable risk factors. PMID:23155671

  6. Comparative analysis on the adoption of innovation in furniture companies

    Directory of Open Access Journals (Sweden)

    Rodolfo Reinaldo Hermes Petter

    2013-06-01

    Full Text Available This study aimed to identify factors categorical adoption of innovation in three main groups: in products, processes and administrative procedures in a group of micro and small enterprises in the furniture sector, located in the middle western state of Santa Catarina. In particular, the study sought to compare the data of a survey conducted by SEBRAE (2009 observed the same factors present innovation in micro and small businesses scattered throughout the Brazilian territory, in order to compare the national stage for the adoption of innovation in relation the scenario presented by the companies studied in this research. Data collection took place by means of a questionnaire consisting of multiple choice closed questions related to the three aforementioned groups of innovation, which was answered by managers of the constituent companies of the group studied. As a result of this research, it was found that the adoption of innovation in product development is the most important aspect in the surveyed companies. It was also found that they seek to adopt the innovation with the objective of entering new markets. However, the main difficulty in adopting innovation were identified lack of skilled labor, shortage and / or lack of access to technology and financial difficulties. Compared to general adoption of innovation by micro and small enterprises studied by SEBRAE (2009, the studied firms have a tendency to develop in the same direction.

  7. Management Activity Linkages to Innovation Deconstruction: An Exploratory Study of the Furniture Industry in Croatia

    Directory of Open Access Journals (Sweden)

    Andreja Pirc Barčić

    2016-03-01

    Full Text Available Corporate leaders often view innovation as a key contributor to superior profits, market sharing, and competitive positioning. However, confusion regarding the definition of innovation, how to create it, and how to implement it remains. In countries that are recent European Union members, little research has been done on innovation and how innovation is related to corporate management activities. In this study, the linkages were examined in the Croatian furniture industry. The first part of the study was to deconstruct innovation into three components: product innovation, production process innovation, and human resource innovation. The second part of the study evaluates the relationships between these innovation components and four company management activities/factors (research and development investments, company flexibility, export activity, and the Internet usage were examined. Scale testing resulted in valid deconstruction measures of innovation. Hypothesized correlations between innovation components and company management factors were supported, although the results were not fully consistent with those of previous studies.

  8. Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom

    Directory of Open Access Journals (Sweden)

    Mohammad Ghofrani

    2017-02-01

    Full Text Available AbstractThe aim of this study was to identify and prioritize the indicators and provide effective solutions to optimize the use of wood in construction classical furniture using the analytic hierarchy process (case study in Qom. For this purpose, studies and results of other researchers and interviews with experts, the factors affecting the optimization of wood consumption were divided into 4 main categories and 23 sub-indicators. The importance of the sub after getting feedback furniture producers were determined by AHP. The results show that the original surface design and human resources are of great importance. In addition, among 23 sub-effective optimization of the use of wood in construction classical furniture, ergonomics, style, skill training and inlaid in classical furniture industry in order to weight the value of 0/247, 0/181, 0/124 and 0/087 are of paramount importance and the method of use of force specialist solutions were a priority.

  9. Associations between flame retardant applications in furniture foam, house dust levels, and residents' serum levels.

    Science.gov (United States)

    Hammel, Stephanie C; Hoffman, Kate; Lorenzo, Amelia M; Chen, Albert; Phillips, Allison L; Butt, Craig M; Sosa, Julie Ann; Webster, Thomas F; Stapleton, Heather M

    2017-10-01

    Polyurethane foam (PUF) in upholstered furniture frequently is treated with flame retardant chemicals (FRs) to reduce its flammability and adhere to rigorous flammability standards. For decades, a commercial mixture of polybrominated diphenyl ethers (PBDEs) called PentaBDE was commonly applied to foam to fulfill these regulations; however, concerns over toxicity, bioaccumulation, and persistence led to a global phase-out in the mid-2000s. Although PentaBDE is still detected in older furniture, other FR compounds such as tris(1,3-dichloroisopropyl) phosphate (TDCIPP) and Firemaster® 550 (FM550) have been increasingly used as replacements. While biomonitoring studies suggest exposure is widespread, the primary sources of exposure are not clearly known. Here, we investigated the relationships between specific FR applications in furniture foam and human exposure. Paired samples of furniture foam, house dust and serum samples were collected from a cohort in North Carolina, USA and analyzed for FRs typically used in PUF. In general, the presence of a specific FR in the sofa of a home was associated with an increase in the concentration of that FR in house dust. For example, the presence of PentaBDE in sofas was associated with significantly higher levels of BDE-47, a major component of PentaBDE, in house dust (10 β =6.4, phouse dust when FM550 was identified in the sofa foam (p<0.01). These relationships were modified by dust loading rates in the living room and the ratio of sofa size to room size. Interestingly, levels of TDCIPP and tris(1-chloro-2-isopropyl) phosphate (TCIPP) were also higher in dust with detections in sofa foam; however, these associations were not statistically significant and may suggest there are other prominent sources of these compounds in the home. In addition, the presence of PentaBDE in sofa foam was associated with significantly higher levels of BDE-47 in serum (p<0.01). These results suggest that FR applications in sofas are likely major

  10. APPLICATION OF NEAR INFRARED SPECTROSCOPY AND EXPLORATORY DATA ANALYSIS FOR THE IDENTIFICATION OF WOODS IN THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lucas Ferreira Bastos

    2012-07-01

    Full Text Available The paper aimed to investigate the application of infrared spectroscopy and exploratory data analysis to distinguish the different types of natural woods, contributing to the control of the origin of the materials used in the furniture industry. The near infrared spectroscopy (NIR was used for the characterization of 44 samples of 19 different types of wood, and the principal component analysis (PCA to discriminate. The proposed methodology was efficient in the separation of some samples, but further studies should be performed for the diffusion of this methodology in the routine of the furniture industry.

  11. The Impact of the Business Environment in Developing an Enterprise - Case Study: Furniture Manufacturing Tefik Canga Design

    Directory of Open Access Journals (Sweden)

    MSc. Arbenita Topalli

    2015-12-01

    Full Text Available The enterprise is an organization that reconciles the workforce, real capital, techniques, information and knowledge to produce and service. The enterprise cannot control or have any impact on the environment that it`s surrounded by, only to adjust to it. Despite that, enterprises can be specialized in a special market segment, yet it will be subject to competitive pressure. Furniture Manufacturing Tefik Canga Design has taken over the use of natural and unnatural resources to promote the development and growth, or to solve financial and operational problems. With this research, we propose a growth model of a manufacturing enterprise in relation to the business environment. Implementation of the case is described and the profitability and productivity performance is analyzed using five years of historical data product. Therefore, by this study is expected to achieve results, that will improve the input-output relationship in order to increase the firm's productivity, increase the value of employees and create opportunities for development in order to cut production costs.

  12. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  13. Learner Support Requirements for Online Workplace Training in the South African Furniture Industry

    Science.gov (United States)

    MacDonald, Iain S.; Bullen, Mark; Kozak, Robert A.

    2010-01-01

    A qualitative research project was conducted to evaluate the suitability of e-learning as a means of delivering training to workplace learners in the South African furniture manufacturing sector. Twenty learners participated in a three-month pilot e-learning course and were monitored throughout. While the study was designed primarily to…

  14. The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

    Science.gov (United States)

    Fulmer, William E.

    This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

  15. Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

    Science.gov (United States)

    Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

    In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

  16. CONTRIBUTION OF COMPUTATIONAL SIMULATION FOR LAYOUT ANALYSIS IN A WOODEN FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Alexandre Navarro Silva

    Full Text Available ABSTRACT The objective of this study was to balance the production line and analyze the layout of the sewing sector in a furniture industry. Using the Arena software, a simulation model was constructed that represented the real system consisting of a cellular layout with 3 groups of 5 seamstresses, who produced 57 different types of products divided into three families, in a daily working day of 625 minutes in the months of February to August and 725 minutes in the months of September to January. The model was quantitatively validated among the managers of the studied industry. The obtained results allowed conclusions with an error of less than 1% in the daily quantity of pieces produced with 99% statistical confidence. Therefore, three scenarios related to the organization of the work environment and the balancing of the production line were constructed, and those include: i linear layout, and the balancing allowed the division of five seamstresses for families 1 and 2, and three seamstresses for family 3; ii study of the layout by processes, so that the best balance was constituted of two groups with seven seamstresses; iii similar to scenario 2 but with six seamstresses in group 1 and seven seamstresses in group 2. It was verified that the modified, alternative scenario 2 is more advantageous for the organization, since it presents greater productivity compared to all other scenarios and to the real system, so the company can increase its production capacity by simply modifying the layout and organizing the work environment.

  17. Electronic medical records and efficiency and productivity during office visits.

    Science.gov (United States)

    Furukawa, Michael F

    2011-04-01

    To estimate the relationship between electronic medical record (EMR) use and efficiency of utilization and provider productivity during visits to US office-based physicians. Cross-sectional analysis of the 2006-2007 National Ambulatory Medical Care Survey. The sample included 62,710 patient visits to 2625 physicians. EMR systems included demographics, clinical notes, prescription orders, and laboratory and imaging results. Efficiency was measured as utilization of examinations, laboratory tests, radiology procedures, health education, nonmedication treatments, and medications. Productivity was measured as total services provided per 20-minute period. Survey-weighted regressions estimated association of EMR use with services provided, visit intensity/duration, and productivity. Marginal effects were estimated by averaging across all visits and by major reason for visit. EMR use was associated with higher probability of any examination (7.7%, 95% confidence interval [CI] = 2.4%, 13.1%); any laboratory test (5.7%, 95% CI = 2.6%, 8.8%); any health education (4.9%, 95% CI = 0.2%, 9.6%); and fewer laboratory tests (-7.1%, 95% CI = -14.2%, -0.1%). During pre/post surgery visits, EMR use was associated with 7.3% (95% CI= -12.9%, -1.8%) fewer radiology procedures. EMR use was not associated with utilization of nonmedication treatments and medications, or visit duration. During routine visits for a chronic problem, EMR use was associated with 11.2% (95% CI = 5.7%, 16.8%) more diagnostic/screening services provided per 20-minute period. EMR use had a mixed association with efficiency and productivity during office visits. EMRs may improve provider productivity, especially during visits for a new problem and routine chronic care.

  18. 77 FR 52311 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2012-08-29

    ... Furniture Co., Ltd. Zhangjiagang Zheng Yan Decoration Co., Ltd. Zhangjiang Sunwin Arts & Crafts Co., Ltd.... Trendex Industries Limited Wan Bao Chen Group Hong Kong Co., Ltd. World Design International Co., Ltd...

  19. E3 Success Story - Getting Insight Into Our Organization and Processes at Beachley Furniture Co., Inc.

    Science.gov (United States)

    Beachley Furniture contacted the U.S. EPA to participate in the Green Suppliers Network (GSN) program which is a collaborative venture among industry, EPA, and the Manufacturing Extension Partnership (MEP) program.

  20. Performance of Color Camera Machine Vision in Automated Furniture Rough Mill Systems

    Science.gov (United States)

    D. Earl Kline; Agus Widoyoko; Janice K. Wiedenbeck; Philip A. Araman

    1998-01-01

    The objective of this study was to evaluate the performance of color camera machine vision for lumber processing in a furniture rough mill. The study used 134 red oak boards to compare the performance of automated gang-rip-first rough mill yield based on a prototype color camera lumber inspection system developed at Virginia Tech with both estimated optimum rough mill...

  1. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-04-30

    This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  2. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-01

    This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  3. Furniture and Timber Training Board, Fourth Year's Scheme; Training Grants Scheme, 1969-70.

    Science.gov (United States)

    British Furniture and Timber Training Board, Wembly (England).

    This booklet explains what training grants are offered by the Furniture and Timber Training Board of Great Britain, indicates how to claim them, and outlines the Board's training philosophy. Foldouts present conditions which apply in whole or in part to the Training Grants Scheme, followed by guidelines for completing forms. The main section…

  4. Categorical ERP Repetition Effects for Human and Furniture Items in 7-Month-Old Infants

    Science.gov (United States)

    Peykarjou, Stefanie; Wissner, Julia; Pauen, Sabina

    2017-01-01

    Behavioural and recent neural evidence indicates that young infants discriminate broad stimulus categories. However, little is known about the categorical perception of humans represented as full bodies with heads and their discrimination from inanimate objects. This study compares infants' brain processing of human and furniture pictures, probing…

  5. 77 FR 21536 - Wooden Bedroom Furniture From the People's Republic of China: Final Rescission of Antidumping...

    Science.gov (United States)

    2012-04-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as..., wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character...

  6. 76 FR 7534 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-02-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden...

  7. Furniture and Equipment in Schools: A Purchasing Guide. Managing School Facilities, Guide 7.

    Science.gov (United States)

    Wadsworth, Alison

    This document offers advice on the processes that should be followed when schools in the United Kingdom buy their furniture and equipment (F&E). Sections 1 and 2 examine the first steps, prior to purchasing, such as curriculum analysis and market exploration; and sections 3 and 4 explore the importance of creating a clear specification for…

  8. NONPROCESS SOLVENT USE IN THE FURNITURE REFINISHING AND REPAIR INDUSTRY: EVALUATION OF ALTERNATIVE CHEMICAL STRIPPERS

    Science.gov (United States)

    The report gives results of an evaluation of the feasibility of using alternatives to high volatile organic compound/hazardous air pollutant (VOC/HAP) solvent-based, chemical strippers that are currently used in the furniture repair and refinishing industry to remove both traditi...

  9. Effects of office innovation on office workers' health and performance

    NARCIS (Netherlands)

    Meijer, Eline M.; Frings-Dresen, Monique H. W.; Sluiter, Judith K.

    2009-01-01

    The implementation of an innovative office concept (e.g. open-plan, flexible workplaces and a paperless office concept) on health and productivity among office workers was evaluated with questionnaires of 138 workers at baseline and 6 and 15 months afterwards. Work-related fatigue, general health,

  10. Auxiliary office chair

    OpenAIRE

    Pascual Osés, Maite

    2007-01-01

    The aim of this project is to develop an auxiliary office chair, which favorably will compete with the existing chairs on the market. Evolutions of ergonomical survey in the work environment and on the configuration of offices require new products which fulfill the requirements properly. In order to achieve it a survey about office chairs has been carried out: types, characteristics, ways of usage and products on the market besides a large antropometrical study and ergonomics related to work ...

  11. Materials Used for the Production of Upholstered Furniture Like Source of Odors in Interior

    Directory of Open Access Journals (Sweden)

    Petr Čech

    2014-01-01

    Full Text Available This paper investigates the problematic of VOC emissions and their assessment by olfactory methods. The main goal of this contribution is determine the odors emitted by upholstery fabrics used for upholstered furniture. This contribution researches the correlation between the results, which were obtained by the olfactory assessment and the results of the measurements of volatile organic compounds (VOCs emitted by choose the kind of covering textiles. This research judged the influence of upholstery fabrics with different chemical composition (polyester, cotton and mixture of viscose and cotton on olfactometric assessment. It was mainly focused on the determination of Hedonic tone and intensity of the odor. These olfactometric characteristics were determined using an equipment Sniffer 9000. Concurrently was also assessed the influence of climatic conditions in small space chamber on olfactometric assessment of tested materials. The climatic conditions differed mainly in terms of temperature and relative humidity in small space chamber. The results are compared with sensory perceptions and the qualitative and quantitative analysis of VOCs performed by using the gas chromatograph Agilent GC 6790 with mass spectrometer detector 5973. The experimental section shows that, the various types of criticized upholstery fabrics with different chemical composition emitted relatively low concentrations of VOC emissions. It was also demonstrated the influence of climatic conditions on VOC emissions and while on their olfactometric assessment. The tested materials of upholstery fabric showed very intensive olfactory sensation, which were described as very unpleasant (−4 in some cases.

  12. Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

    Science.gov (United States)

    Savanur, C S; Altekar, C R; De, A

    2007-10-01

    Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

  13. 76 FR 9747 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2011-02-22

    ..., stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  14. Co-brand strategy of evaluation of visual images in furniture design: Jimmy S.P.A. and STRAUSS as examples

    Science.gov (United States)

    Chen, Tien-Li; Pan, Fang-Ming; Tsai, Jen-Hui

    2013-03-01

    This study aimed to investigate the correlation of the image associated by the design Co-Brand (Jimmy S.P.A. and STRAUSS) and the impression perceived by subject of viewers. Visual images were used to examine the merit of the evaluation. The best result is provided using an object as an appropriate evaluation method. There are a lot of factors which influence to evaluation of a design. This study is limited to distinguish the appearance from Jimmy's picture books transform furniture and so on. Co-Brand of Jimmy S.P.A. and STRAUSS is not easy because there are not from the same cultural, and industry background and applying different marketing strategy, it is a way to combine the two brands by designing, used questionnaire of SD (Semantic differential evaluation) evaluation method to test out the perception of viewers, the objective of this study is to investigate and appraised the Co-Brands use by of the image in furniture from patrons. SD evaluation result showed, if design cannot understand the perception image of Jimmy S.P.A and STRAUSS with viewers mind, furniture design also can't transmit feeling with design.

  15. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-08

    This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  16. Feasibility and acceptability of reducing workplace sitting time: a qualitative study with Australian office workers.

    Science.gov (United States)

    Hadgraft, Nyssa T; Brakenridge, Charlotte L; LaMontagne, Anthony D; Fjeldsoe, Brianna S; Lynch, Brigid M; Dunstan, David W; Owen, Neville; Healy, Genevieve N; Lawler, Sheleigh P

    2016-09-05

    Office workers spend a large proportion of their working hours sitting. This may contribute to an increased risk of chronic disease and premature mortality. While there is growing interest in workplace interventions targeting prolonged sitting, few qualitative studies have explored workers' perceptions of reducing occupational sitting outside of an intervention context. This study explored barriers to reducing office workplace sitting, and the feasibility and acceptability of strategies targeting prolonged sitting in this context. Semi-structured interviews were conducted with a convenience sample of 20 office workers (50 % women), including employees and managers, in Melbourne, Australia. The three organisations (two large, and one small organisation) were from retail, health and IT industries and had not implemented any formalised approaches to sitting reduction. Questions covered barriers to reducing sitting, the feasibility of potential strategies aimed at reducing sitting, and perceived effects on productivity. Interviews were audiotaped and transcribed verbatim. Data were analysed using thematic analysis. Participants reported spending most (median: 7.2 h) of their working hours sitting. The nature of computer-based work and exposure to furniture designed for a seated posture were considered to be the main factors influencing sitting time. Low cost strategies, such as standing meetings and in-person communication, were identified as feasible ways to reduce sitting time and were also perceived to have potential productivity benefits. However, social norms around appropriate workplace behaviour and workload pressures were perceived to be barriers to uptake of these strategies. The cost implications of height-adjustable workstations influenced perceptions of feasibility. Managers noted the need for an evidence-based business case supporting action on prolonged sitting, particularly in the context of limited resources and competing workplace health priorities

  17. Feasibility and acceptability of reducing workplace sitting time: a qualitative study with Australian office workers

    Directory of Open Access Journals (Sweden)

    Nyssa T. Hadgraft

    2016-09-01

    Full Text Available Abstract Background Office workers spend a large proportion of their working hours sitting. This may contribute to an increased risk of chronic disease and premature mortality. While there is growing interest in workplace interventions targeting prolonged sitting, few qualitative studies have explored workers’ perceptions of reducing occupational sitting outside of an intervention context. This study explored barriers to reducing office workplace sitting, and the feasibility and acceptability of strategies targeting prolonged sitting in this context. Methods Semi-structured interviews were conducted with a convenience sample of 20 office workers (50 % women, including employees and managers, in Melbourne, Australia. The three organisations (two large, and one small organisation were from retail, health and IT industries and had not implemented any formalised approaches to sitting reduction. Questions covered barriers to reducing sitting, the feasibility of potential strategies aimed at reducing sitting, and perceived effects on productivity. Interviews were audiotaped and transcribed verbatim. Data were analysed using thematic analysis. Results Participants reported spending most (median: 7.2 h of their working hours sitting. The nature of computer-based work and exposure to furniture designed for a seated posture were considered to be the main factors influencing sitting time. Low cost strategies, such as standing meetings and in-person communication, were identified as feasible ways to reduce sitting time and were also perceived to have potential productivity benefits. However, social norms around appropriate workplace behaviour and workload pressures were perceived to be barriers to uptake of these strategies. The cost implications of height-adjustable workstations influenced perceptions of feasibility. Managers noted the need for an evidence-based business case supporting action on prolonged sitting, particularly in the context of

  18. GIS DATA COLLECTION FOR PEDESTRIAN FACILITIES AND FURNITURE USING MAPINR FOR ANDROID

    Directory of Open Access Journals (Sweden)

    N. Naharudin

    2016-09-01

    Full Text Available Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

  19. GIS Data Collection for Pedestrian Facilities and Furniture Using Mapinr for Android

    Science.gov (United States)

    Naharudin, N.; Ahamad, M. S. S.; Sadullah, A. F. M.

    2016-09-01

    Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

  20. Flame retardants in UK furniture increase smoke toxicity more than they reduce fire growth rate.

    Science.gov (United States)

    McKenna, Sean T; Birtles, Robert; Dickens, Kathryn; Walker, Richard G; Spearpoint, Michael J; Stec, Anna A; Hull, T Richard

    2018-04-01

    This paper uses fire statistics to show the importance of fire toxicity on fire deaths and injuries, and the importance of upholstered furniture and bedding on fatalities from unwanted fires. The aim was to compare the fire hazards (fire growth and smoke toxicity) using different upholstery materials. Four compositions of sofa-bed were compared: three meeting UK Furniture Flammability Regulations (FFR), and one using materials without flame retardants intended for the mainland European market. Two of the UK sofa-beds relied on chemical flame retardants to meet the FFR, the third used natural materials and a technical weave in order to pass the test. Each composition was tested in the bench-scale cone calorimeter (ISO 5660) and burnt as a whole sofa-bed in a sofa configuration in a 3.4 × 2.25 × 2.4 m 3 test room. All of the sofas were ignited with a No. 7 wood crib; the temperatures and yields of toxic products are reported. The sofa-beds containing flame retardants burnt somewhat more slowly than the non-flame retarded EU sofa-bed, but in doing so produced significantly greater quantities of the main fire toxicants, carbon monoxide and hydrogen cyanide. Assessment of the effluents' potential to incapacitate and kill is provided showing the two UK flame retardant sofa-beds to be the most dangerous, followed by the sofa-bed made with European materials. The UK sofa-bed made only from natural materials (Cottonsafe ® ) burnt very slowly and produced very low concentrations of toxic gases. Including fire toxicity in the FFR would reduce the chemical flame retardants and improve fire safety. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  1. Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

    Science.gov (United States)

    Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

    2018-03-22

    Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

  2. Creativity Enhancement in Lithuanian Furniture Manufacturing Business According to International Business Development

    Directory of Open Access Journals (Sweden)

    Rita Zybartaitė

    2014-04-01

    Full Text Available This article analyzes Lithuanian furniture manufacturing business perceptions towards creativity, and creativityenhancement behavior according to its international development. Firstly article focuses on international business development,substantiate need of creativity for international business development, outline creativity influencing factors which operateat individual, team and organizational levels and recommendations how to enhance creativity in methodical way. Secondly,article describes a problem of empirical research, methodology of used methods and instruments, and presents results of surveyresearch.

  3. 76 FR 14101 - Meadwestvaco Corporation, Consumer and Office Products Division, Including On-Site Leased Workers...

    Science.gov (United States)

    2011-03-15

    ... undated planning and organizing products. The review shows that on August 21, 2008, a certification of..., Consumer and Office Products Division, Including On-Site Leased Workers From Pro-Tel People, Sidney, NY; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with...

  4. The fate of Spanish furniture on the art market as reflection of its social valuation

    Directory of Open Access Journals (Sweden)

    Caruana Moyano, Sonsoles

    2011-06-01

    Full Text Available In Spain furniture did not begin to be dealt with as material for scholarly research —with notable exceptions— until the 1970s. Likewise at that time a new form of art sales appeared on the national scene in addition to antique and art dealers: auctions, invented in England 200 years earlier. Thus the scholarly and the commercial came together: rigorous publications, thorough studies and catalogues of furniture which encouraged the appearance of new pieces, in many instances via the channel of the art market- that in turn nourished serious studies. Consequently furniture began to be valued in the broadest sense of the term, leading to its conservation, its dissemination and fixing its monetary worth.

    El mueble no comenzó a ser tratado en España como objeto de estudio científico —salvo honrosas excepciones— hasta la década de 1970. En ese momento irrumpe además en el panorama nacional una nueva forma de venta de arte, al margen de anticuarios y marchantes: las subastas, nacidas dos siglos atrás en Inglaterra. Así, lo académico y lo comercial se aúnan: publicaciones rigurosas, estudios concienzudos y catálogos de mobiliario, favorecen la aparición de nuevas piezas en muchas ocasiones a través del canal del mercado del arte, que, a su vez, nutren dichos estudios. Se aprende a valorar, en el sentido más amplio del término, el mobiliario. Lo que lleva a su conservación, su divulgación y también, por qué no, a establecer su valor pecuniario.

  5. 78 FR 8493 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2013-02-06

    ... business because it has English and French customers. Because of this, we will treat Foliot Furniture Inc... electronically via Import Administration's Antidumping and Countervailing Duty Centralized Electronic Service...://www.trade.gov/ia/ . The signed Preliminary Decision Memorandum and the electronic versions of the...

  6. Neurobehavioral approach for evaluation of office workers' productivity: The effects of room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Lan, Li; Lian, Zhiwei; Pan, Li [School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Ye, Qian [Shanghai Research Institute of Building Science, Shanghai 200041 (China)

    2009-08-15

    Indoor environment quality has great influence on worker's productivity, and how to assess the effect of indoor environment on productivity remains to be the major challenge. A neurobehavioral approach was proposed for evaluation of office workers' productivity in this paper. The distinguishing characteristic of neurobehavioral approach is its emphasis on the identification and measurement of behavioral changes, for the influence of environment on brain functions manifests behaviorally. Therefore worker's productivity can be comprehensively evaluated by testing the neurobehavioral functions. Four neurobehavioral functions, including perception, learning and memory, thinking, and executive functions were measured with nine representative psychometric tests. The effect of room temperature on performance of neurobehavioral tests was investigated in the laboratory. Four temperatures (19 C, 24 C, 27 C, and 32 C) were investigated based on the thermal sensation from cold to hot. Signal detection theory was utilized to analyze response bias. It was found that motivated people could maintain high performance for a short time under adverse (hot or cold) environmental conditions. Room temperature affected task performance differentially, depending on the type of tasks. The proposed neurobehavioral approach could be worked to quantitatively and systematically evaluate office workers' productivity. (author)

  7. CRITICAL DEVELOPMENT OF COSTING METHODS USED IN THE FURNITURE INDUSTRY, IN THE CONTEXT OF ECONOMIC REALITY SPECIAL XXI CENTURY

    Directory of Open Access Journals (Sweden)

    Ene Dumitru

    2010-12-01

    Full Text Available In the current economic downturn in the furniture industry companies, to face competition, requires new costing methods to succeed, in a flexible manner, fructifying market information, inside to find levers to identify places, resource intensive activities and then cost reduction opportunities. New methods of management cost excess the accounting and economics scope Current economic situation requires this work and converts the cost information into the main tool of insurance competitiveness and profitability of the company. Applying the standard cost in single cost model is a viable business solutions of enterprises in the furniture industry to face strong competition from European Union, specifically in the context of complex economic XXI century.

  8. Assessing the match between female primary students’ anthropometric dimensions and furniture dimensions in Hamadan schools in 2013

    Directory of Open Access Journals (Sweden)

    R. Heidarimoghadam

    2015-04-01

    Conclusion: Despite differences in the body dimensions of primary school students, there is no regularity in using of school furniture. Overall, the dimensions of existing benches and desks are not matched with the anthropometric dimensions of students.

  9. Concerning the deterioration of furniture: factors in decay and preventive conservation

    Directory of Open Access Journals (Sweden)

    Ordóñez Goded, Cristina

    2011-06-01

    Full Text Available This article outlines some of the principle factors in the deterioration of furniture (lighting, relative humidity, temperature, biodegradation and the human element and presents the type of maintenance work that can be carried out for their preservation denominated “preventive conservation.” These methods, while not eliminating the natural ageing of furniture, at least manage to slow down the decay of their constituent materials. Among the most important are the maintenance of optimal environmental conditions in the place where the works are located, their periodical inspection to check for possible biological infestation and their cleaning at regular intervals.

    Tras una exposición sobre algunos de los principales factores de deterioro del mobiliario (iluminación, humedad relativa, temperatura, biodegradación y elemento humano, este artículo refiere brevemente al conjunto de intervenciones de mantenimiento que pueden llevarse a cabo de cara a su preservación, denominadas “de conservación preventiva”. Se habla de labores que, si bien no evitan el natural envejecimiento de los muebles, sí pueden retardar la degradación de sus materiales constitutivos. Entre ellas podríamos destacar el mantenimiento de unas condiciones ambientales óptimas del lugar en el que se encuentran ubicadas las obras, la revisión periódica de éstas con el fin de comprobar si existe o no infestación biológica, la limpieza regular de las mismas, etc.

  10. Occupational Health Impacts Due to Exposure to Organic Chemicals over an Entire Product Life Cycle.

    Science.gov (United States)

    Kijko, Gaël; Jolliet, Olivier; Margni, Manuele

    2016-12-06

    This article presents an innovative approach to include occupational exposures to organic chemicals in life cycle impact assessment (LCIA) by building on the characterization factors set out in Kijko et al. (2015) to calculate the potential impact of occupational exposure over the entire supply chain of product or service. Based on an economic input-output model and labor and economic data, the total impacts per dollar of production are provided for 430 commodity categories and range from 0.025 to 6.6 disability-adjusted life years (DALY) per million dollar of final economic demand. The approach is applied on a case study assessing human health impacts over the life cycle of a piece of office furniture. It illustrates how to combine monitoring data collected at the manufacturing facility and averaged sector specific data to model the entire supply chain. This paper makes the inclusion of occupational exposure to chemicals fully compatible with the LCA framework by including the supply chain of a given production process and will help industries focus on the leading causes of human health impacts and prevent impact shifting.

  11. Do animals and furniture items elicit different brain responses in human infants?

    Science.gov (United States)

    Jeschonek, Susanna; Marinovic, Vesna; Hoehl, Stefanie; Elsner, Birgit; Pauen, Sabina

    2010-11-01

    One of the earliest categorical distinctions to be made by preverbal infants is the animate-inanimate distinction. To explore the neural basis for this distinction in 7-8-month-olds, an equal number of animal and furniture pictures was presented in an ERP-paradigm. The total of 118 pictures, all looking different from each other, were presented in a semi-randomized order for 1000ms each. Infants' brain responses to exemplars from both categories differed systematically regarding the negative central component (Nc: 400-600ms) at anterior channels. More specifically, the Nc was enhanced for animals in one subgroup of infants, and for furniture items in another subgroup of infants. Explorative analyses related to categorical priming further revealed category-specific differences in brain responses in the late time window (650-1550ms) at right frontal channels: Unprimed stimuli (preceded by a different-category item) elicited a more positive response as compared to primed stimuli (preceded by a same-category item). In sum, these findings suggest that the infant's brain discriminates exemplars from both global domains. Given the design of our task, we conclude that processes of category identification are more likely to account for our findings than processes of on-line category formation during the experimental session. Copyright © 2009 Elsevier B.V. All rights reserved.

  12. Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

    Directory of Open Access Journals (Sweden)

    Jegatheswaran Ratnasingam

    2015-12-01

    Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

  13. An Investigation of Self-reported Health-related Productivity Loss in Office Workers and Associations With Individual and Work-related Factors Using an Employer's Perspective.

    Science.gov (United States)

    Pereira, Michelle Jessica; Johnston, Venerina; Straker, Leon Melville; Sjøgaard, Gisela; Melloh, Markus; O'Leary, Shaun Patrick; Comans, Tracy Anne

    2017-07-01

    Office workers have a high prevalence of musculoskeletal conditions. This can be a significant economic burden due to health-related productivity loss. Individual and work-related factors related to office worker health-related productivity were investigated. A survey including the Health and Work Performance Questionnaire, which estimated productivity loss, also recorded individual and work-related factors with potential associations with health-related productivity. Muscle function and workstation ergonomics were examined through physical assessments. Linear models investigated the relationships between these factors and health-related productivity. Significant factors identified were occupational category (0.001 productivity loss was greater in office workers working as managers, with lower job satisfaction and psychological wellbeing, and those with musculoskeletal pain. Office worker health-related productivity loss is represented by a combination of both individual and work-related factors.

  14. O problema combinado de planejamento da produção e corte de estoque sob incertezas: aplicação em fábricas de móveis de pequeno porte The integrated problem of production planning and cutting stock under uncertainties: application in small-scale furniture plants

    Directory of Open Access Journals (Sweden)

    Douglas Alem

    2013-03-01

    Full Text Available Esse trabalho investiga um problema combinado de planejamento da produção e corte de estoque comum em fábricas de móveis de pequeno porte, onde os custos de produção envolvidos no processo de manufatura e as demandas dos produtos não são conhecidos com precisão. Para lidar com essas incertezas, foram propostos modelos de otimização robusta que permitem controlar o conservadorismo da solução de acordo com a atitude do decisor em relação ao risco. Experimentos computacionais baseados em dados reais de uma planta moveleira mostraram que é possível obter soluções robustas sem sacrificar em demasia o custo total. Além disso, observou-se que estratégias tipicamente utilizadas na prática para lidar com as incertezas podem gerar planos de produção com custos totais proibitivos.This paper investigates an integrated production planning and cutting stock problem that is common in small-scale furniture plants, in which the production costs involved in the manufacturing process and the demands for the products are not known precisely. To deal with these uncertainties, robust optimization models that control the conservatism of the solution according to the attitude of the decision maker towards risk were proposed. Computational experiments based on real data from a furniture plant showed that it is possible to obtain robust solutions without overly sacrificing the total cost. In addition, it was observed that commonly used strategies to deal with uncertainty issues can result in production plans with prohibitive total costs.

  15. An Investigation of Self-reported Health-related Productivity Loss in Office Workers and Associations With Individual and Work-related Factors Using an Employer's Perspective

    DEFF Research Database (Denmark)

    Pereira, Michelle Jessica; Johnston, Venerina; Straker, Leon Melville

    2017-01-01

    the Health and Work Performance Questionnaire, which estimated productivity loss, also recorded individual and work-related factors with potential associations with health-related productivity. Muscle function and workstation ergonomics were examined through physical assessments. Linear models investigated...... in office workers working as managers, with lower job satisfaction and psychological wellbeing, and those with musculoskeletal pain. CONCLUSION: Office worker health-related productivity loss is represented by a combination of both individual and work-related factors.......OBJECTIVE: Office workers have a high prevalence of musculoskeletal conditions. This can be a significant economic burden due to health-related productivity loss. Individual and work-related factors related to office worker health-related productivity were investigated. METHODS: A survey including...

  16. Waste from glued wood - A base for new products and/or bio-fuel?

    OpenAIRE

    Bjurman, Therese

    2009-01-01

      The Swedwood Company is a supplier to IKEA of wood furniture. They have grown larger concurrently with IKEA and at present they have 47 production units spread over twelve countries of which most are located in Eastern Europe. One of the factories is Zbaszynek which is located in Poland. They manufacture so called board-on-frame furniture. A board-on-frame is basically made out of particle board frames which are filled with special design paper that enfolds air. The frames are then covered ...

  17. Predictors of monoterpene exposure in the Danish furniture industry.

    Science.gov (United States)

    Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

    2012-04-01

    Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a

  18. Descriptive analysis of factors that influence economical results in the furniture cluster of Bento Gonçalves

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2014-12-01

    Full Text Available The purpose of this article is to analyze factors that can influence the competitiveness of companies in the furniture cluster of Bento Gonçalves, Rio Grande do Sul. By a literature review, we identify four factors that can influence competition in clusters: the region's productivity, innovation, relationship with suppliers, and cooperation between companies. The research method is the single case study. The research techniques are the review of specific bibliographic and documentation of the studied cluster, and interviews with experts of the cluster. The main findings are: the cluster has high productivity, mainly by hi-tech machinery employed by the main companies; innovation is permanent and motivated by the imposition to medium and short companies of business goals by the main companies; the relationship with suppliers is problematic regarding the large-scale vendors by the lack of the practice of collective purchases in the area; and cooperation between enterprises is small, by the culture of the region that don´t appreciate depending on resources available outside the companies. Such factors can contribute to produce hypotheses for further research.

  19. The furniture of the library of the Glasgow School of Art by Charles Rennie Mackintosh (1868-1928) [dissertation

    OpenAIRE

    Bell, John; Bell, Simon

    1991-01-01

    This dissertation, which encompasses the set of furniture and light fittings designed for use in Glasgow School of Art library has been produced in response to the desire for the complete recording and analysis of that space.

  20. Flooring-systems and their interaction with furniture and humans

    DEFF Research Database (Denmark)

    Frier, Christian; Pedersen, Lars; Andersen, Lars Vabbersgaard

    2017-01-01

    Flooring-system designs may be sensitive in terms of their vibrational performance due the risk that serviceability-limit-state problems may be encountered. For evaluating the vibrational performance of a flooring system at the design stage, decisions must be made by the engineer in charge...... of computations. Passive humans and/or furniture are often present on a floor. Typically, these masses and their way of interacting with the floor mass are ignored in predictions of vibrational behaviour of the flooring system. Utilizing a shell finite-element model, the paper explores and quantifies how non......-structural mass can influence central parameters describing the dynamic behaviour of the flooring system with focus on elevated non-structural mass. © 2017 The Authors. Published by Elsevier Ltd....

  1. Processo de implementação da certificação florestal nas empresas moveleiras nacionais Process of implementation of florest certification in nacional furniture companies

    Directory of Open Access Journals (Sweden)

    Laércio Antônio Gonçalves Jacovine

    2006-12-01

    Full Text Available O presente estudo foi desenvolvido com o objetivo de avaliar o processo de implementação da certificação florestal nas empresas moveleiras nacionais. Para a realização deste estudo, utilizaram-se dados secundários, obtidos do website do Conselho de Manejo Florestal (FSC do Brasil e dados primários, obtidos de questionários aplicado às empresas moveleiras que possuíam produtos certificados. Verificou-se que o tempo gasto no processo, na maioria dos casos, foi de menos de um ano, e os custos principais estiveram relacionados à preparação da empresa para a auditoria de certificação. Além disso, a maioria das empresas afirmou utilizar a logomarca FSC nos seus produtos certificados e não possuíam experiência com outros tipos de certificação (série ISO, por exemplo. Pelos resultados, pode-se concluir que o período de tempo gasto na implementação da certificação é considerado breve, além de os custos serem acessíveis para as empresas, no geral. Conclui-se, também, que possuir outro tipo de certificação não é fator determinante para que uma empresa da indústria moveleira busque a certificação de cadeia de custódia de seus produtos.The objective of the present study was to evaluate the process of implementation of forest certification in Brazilian furniture companies. Secondary data from the Forest Management Council website (FSC Brazil and primary data from questionnaires applied to furniture companies producing certified products were used. It was verified that the time spent on the process, in most cases, was less than one year, and the main costs were related with preparing the company for the certification audit. In addition, most companies declared that they use the FSC label in their products and have no experience with other types of certification (ISO series, for example. The results led to the conclusiom that the time spent in the implementation of the certification is considered short and the costs

  2. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  3. Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

    Science.gov (United States)

    David Nicholls; Matthew Bumgardner

    2007-01-01

    This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

  4. 76 FR 53409 - Wooden Bedroom Furniture From the People's Republic of China: Corrected Notice of Court Decision...

    Science.gov (United States)

    2011-08-26

    ... International Ltd. (``Evergreen'') and Jayaraja Furniture (``Jayayraja'') from the surrogate financial ratio..., Nizamuddin and Swaran) to derive the financial ratios pursuant to the lower Court's order in Dorbest II.\\14... Department also recalculated the surrogate financial ratios applied to Dorbest, and re-included the financial...

  5. Effects of the office environment on health and productivity 1: Auditory and visual distraction

    NARCIS (Netherlands)

    Korte, E. de; Kuijt-Evers, L.; Vink, P.

    2007-01-01

    A pilot experiment was conducted to evaluate the effects of visual or auditory distraction in an office environment on productivity, concentration and emotion. Ten subjects performed a simple, standardized computer task in five conditions (undisturbed, 3 variations of auditory distraction and visual

  6. [From mandatory to participatory prevention: a model applied to the upholstered furniture industry].

    Science.gov (United States)

    Di Leone, G; Trani, G; Falco, S; Attimonelli, Rossella; Carino, M; Lagravinese, D

    2008-01-01

    The Italian 2006-2008 National Health Plan emphasizes synergy and cooperation between the agencies formally involved in the prevention of occupational risks, in agreement with social partners. The so-called 'triangle of the sofa industry' is an interregional geographic area south-west of Bari, Italy. In 2003 this area produced 16% of the world-wide upholstered furniture output, with more than 500 plants of varying size. The aim was to set up a network of communication and cooperation between the competent Agencies and Regions in order to address the rising trend of upper limb work-related musculoskeletal disorders. The first step of the National Health Service Unit in Bari was to assess risk via a Ministerial research project and implement various information campaigns involving institutions, occupational physicians, private companies and public opinion. In a subsequent phase a synergy between the local Departmenst ofPrevention of the different Regions, the Italian Institute for Insurance Occupational Accidents and Disease (INAIL), the trade unions and the upholstered furniture industry Association was established. New joint experimental projects (cutting tools, ergonomic table for assemblers, instruments for isokinetic evaluation) were launched together with training programmes for management, safety technicians and workers. This kind of 'participatory prevention' is more appropriate for the goal of a collaborative effort in order to assist the companies, which is a modern interpretation of the mission of public health prevention operators.

  7. 78 FR 32245 - Notice of Receipt of Pesticide Products; Registration Applications To Register New Uses

    Science.gov (United States)

    2013-05-29

    ... Road, Pasadena, TX 77507-1041. Active ingredient: Novaluron. Product Type: Insecticide; Insect Growth... furniture, animal quarters, carpets, kennels, and poultry houses. Contact: Jennifer Gaines, (703) 305-5967...

  8. DIAGNOSIS OF BANKRUPTCY RISK IN THE FURNITURE INDUSTRY USING THE CANON-HOLDER AND ALTMAN MODELS

    Directory of Open Access Journals (Sweden)

    Radu MĂRGINEAN

    2015-06-01

    Full Text Available The financial and economic crisis that started in 2008 caused negative effects felt by the entire European economy, affecting more or less all of the world's economies. This paper aims to study the diagnosis of bankruptcy risk using the Canon-Holder and Altman methods, from a theoretical point of view and with practical examples on a company in the furniture industry in Romania. In a context of economic uncertainty, the relevance of such an analysis designed to quantify the risk of bankruptcy for companies is the default. The financial data used is real and descriptively analyzed, we analyzed a period of eight years, between 2006-2013. As a method of analysis complementary to the financial analysis of the background of companies, the diagnosis of bankruptcy risk using the score method, using the specific models known in the specialty literature, brings relevant information concerning the problem of risk assessment. We concluded in the case study the opportunity of such an analysis for the furniture industry through the results obtained in the case studies, the method is a useful tool, especially for the practitioners in the sector.

  9. Finding the Optimal Mix between Telework and Office Hours to Enhance Employee Productivity: A Study into the Relationship between Telework Intensity and Individual Productivity, with Mediation of Intrinsic Motivation and Moderation of Office Hours

    NARCIS (Netherlands)

    Hoornweg, N.; Peters, P.; Heijden, B.I.J.M. van der; Leede, J. de

    2016-01-01

    This survey study among 111 teleworkers in a bank organization investigated the relationship between telework intensity and individual productivity, and whether this relationship was mediated by employees’ intrinsic motivation. Also the moderating role of office hours in the model’s associations was

  10. DSM energy saving pilot project report. Furniture Plant Teika, Riga, Latvia

    International Nuclear Information System (INIS)

    Ananevski, V.; Kalejs, M.; Hercogs, J.; Blumbergs, U.

    1995-07-01

    The purpose of this pilot project was to carry out energy audit into the furniture plant TEIKA and energy saving measures. Another aim was to transfer the Danish know how and experience obtained through the Danish effort in Latvian industries consumers. Therefore great attention is paid to energy mapping in order to show possibilities of the Danish methodisms. This report is a part of the Joint Latvian - Danish Project Demand Side Management and Energy Saving. It is a results of collaborative efforts between a Latvian team, consisting of the specialists from Latvenergo and on the other hand a Danish team, which was represented by the Danish Power Consult company NESA. (EG)

  11. Social Phenomenological Study of Strategic Action in the Cluster of Furniture

    Directory of Open Access Journals (Sweden)

    Fernanda Maria Felicio Macedo

    2013-09-01

    Full Text Available The research carried out on the following strategic phenomenon, for the most part, the guidelines of the functionalist paradigm. This production has its relevance in the scientific community, however, does not cover the strategy in all its complexity. In this scenario, it is intended to address the strategy from the assumptions of social phenomenology, an online research study focused on the action. Social action is the experience of the phenomenon. For this, research is carried out "for reasons" and "why reasons" present in strategic action. The relevance of this study is to address the strategy as a phenomenon that exists because of the social subject, which may show that its essence transcends the limits of individuality, because thinking is based on the phenomenological social awareness of the existence of the other. Held semi-structured interviews with fourteen strategists operating in cluster of furniture Bento Gonçalves, and the data analyzed according to the phenomenological approach of Sanders (1982. As a result, it follows that the "why reasons" are the 'becoming' and expertise, and the "for reasons": the search for freedom in corporate decision making and building a legacy. We conclude that the meaning of strategic action is not isolated, being linked to several factors related to the existential project of the strategist.

  12. VOCs and formaldehyde emissions from cleaning products and air fresheners

    OpenAIRE

    Solal , Cécilia; Rousselle , Christophe; Mandin , Corinne; Manel , Jacques; Maupetit , François

    2008-01-01

    International audience; Human indoor exposure to Volatile Organic Compounds (VOCs) may be associated with the use of household products. However little is known about their emissions and to what extent they contribute to indoor air pollution. The French Agency for Environmental and Occupational Health Safety (Afsset) conducted tests in order to characterize VOCs emissions from 32 consumer products: air fresheners, glass cleaners, furniture polishes, toilet products, carpet and floor cleaning ...

  13. Study of educational furniture conformity with students anthropometric dimensions of Isfahan university of medical sciences

    Directory of Open Access Journals (Sweden)

    mehdi Sadeghi

    2010-02-01

    Full Text Available Musculoskeletal disorders, early fatigue induced by static work and the same symptoms are caused by inappropriate designed tools, equipment, building and workplace. Inadequate educational furniture is taken to be the reason of severe posture problems such as low back pain, spinal disorders, fatigue, shoulder and neck pain, and disturbance circulation in legs. So ergonomic design of educational furniture should be carefully considered. Materials and Methods: The present research was a cross-sectional study. Samples included desks and chairs (n=150 chosen from reading rooms of dormitories and faculties of Isfahan university of medical sciences Isfahan- Iran. In the study 2 parameters from desk and 5 parameters from chairs were assessed using a tape-measure and a set-sqare. Data were analyzed by SPSS ver 10 software. Results: Comparing the results from the mean of measured values (for seating height, desk height and desk clearance indicated a significant difference between them (p<0. 00. Conclusion: Findings of the study showed that existing standard in Iran about chairs and tables for educational institutions should be reviewed. Also the most important problem with chairs and desks are seating height and desk surface height respectively. These two parameters didn’t match with anthropometric dimensions of the sudents of Isfahan university of medical sciences.

  14. Air Distribution in a Furnished Room Ventilated by Mixing Ventilation

    DEFF Research Database (Denmark)

    Nielsen, June Richter; Nielsen, Peter V.; Svidt, Kjeld

    Using isothermal full-scale experiments and two-dimensional isothermal CFD simulations it is investigated how normal office furniture influences the air movements in a room with mixing ventilation. Three different set-ups are made in the experiments and different sizes and locations of the furnit......Using isothermal full-scale experiments and two-dimensional isothermal CFD simulations it is investigated how normal office furniture influences the air movements in a room with mixing ventilation. Three different set-ups are made in the experiments and different sizes and locations...

  15. Market control in the electricity production and wholesale markets. A critical analysis of the more recent views of the Federal Cartel Office

    International Nuclear Information System (INIS)

    Drozella, Gisela; Krebs, Harald

    2013-01-01

    In its sector-specific investigations in the electricity production and wholesale markets the German Federal Cartel Office continues to apply its concept of what it terms a primary sales market. The authors describe the discrepancy that exists between the beliefs about market action that underlie the Cartel Office's determination of market boundaries and market action as it actually occurs in reality. The legal concept of the exercise of unilateral market control by several companies as developed by the Cartel Office on the basis of an economic instrument appears unsustainable, both legally and economically. This is compounded by methodological shortcomings. It is therefore the authors' opinion that the approach taken by the Cartel Office in its sector-specific investigations does not afford a sustainable basis for its finding of electricity production companies exercising market control.

  16. Art Deco Furniture Designs in Republican Era: Selahattin Refik Sırmalı and the Study Room of Atatürk

    Directory of Open Access Journals (Sweden)

    Çiler Buket Tosun

    2014-12-01

    Full Text Available This study presents the works of Selahattin Refik who played an active role in the Republican Era Architecture through his modern practices in interior architecture and furniture design. Practicing the most recent and popular art of his time, Art Deco, Refik also received the appreciation of Atatürk, and was influential in the first twenty years of the Republic. This study focuses on his interior and furniture designs for the ‘Study Room’ designed for Ataturk at the ‘Ataturk Museum House which is the first Official Residence of the President of the Republic of Turkey. Pioneering original Art Deco practices of our country, the ‘Study Room’ has been an implementation that illustrates not only the originality and competency of Selahattin Refik in practicing the modern art of the era but also the reflection of the modern identity of the Republic on interior designs.

  17. Competition for the Elements of the City Environment for Irkutsk’s Public Spaces: Street Furniture, Street Design

    Directory of Open Access Journals (Sweden)

    Tatyana Danilova

    2016-10-01

    Full Text Available The article reviews the contest «Street furniture. Street design», which was held this summer by manufacturing company «PalpNord», International research laboratory of study and design of the urban environment «Urban Planning School» and the Union of Architects of Russia. The winners and their projects are also listed in the article.

  18. Mastering VBA for Office 2010

    CERN Document Server

    Mansfield, Richard

    2010-01-01

    A comprehensive guide to the language used to customize Microsoft Office. Visual Basic for Applications (VBA) is the language used for writing macros, automating Office applications, and creating custom applications in Word, Excel, PowerPoint, Outlook, and Access. This complete guide shows both IT professionals and novice developers how to master VBA in order to customize the entire Office suite for specific business needs.: Office 2010 is the leading productivity suite, and the VBA language enables customizations of all the Office programs; this complete guide gives both novice and experience

  19. 41 CFR 102-37.325 - With whom and for what purpose(s) may a SASP enter into a cooperative agreement?

    Science.gov (United States)

    2010-07-01

    ... SASP with available GSA or agency office space and related support such as office furniture and information technology equipment needed to screen and process property for donation. (2) Permitting the SASP...

  20. DoD Use of Commercial Acquisition Practices When They Apply and When They Do Not

    Science.gov (United States)

    2015-10-01

    Defense AT&L: September–October 2015 2 From the Under Secretary of Defense for Acquisition, Technology , and Logistics DoD Use of...that an item is offered as a commercial product; next, the need to access cutting-edge commercial technologies ; and, finally, those cases where we...For purely commercial items widely and competitively sold on the open market, this is easy. For thousands of items, from office furniture to cleaning

  1. Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

    Science.gov (United States)

    Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

    2003-01-01

    Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

  2. Radiation cured coatings for high performance products

    International Nuclear Information System (INIS)

    Parkins, J.C.; Teesdale, D.H.

    1984-01-01

    Development over the past ten years of radiation curable coating and lacquer systems and the means of curing them has led to new products in the packaging, flooring, furniture and other industries. Solventless lacquer systems formulated with acrylates and other resins enable high levels of durability, scuff resistance and gloss to be achieved. Ultra violet and electron beam radiation curing are used, the choice depending on the nature of the coating, the product and the scale of the operation. (author)

  3. IMPACTS OF DIFFERENT JOINT ANGLES AND ADHESIVES ON DIAGONAL TENSION PERFORMANCES OF BOX-TYPE FURNITURE

    Directory of Open Access Journals (Sweden)

    Musa Atar

    2010-02-01

    Full Text Available The goal of this study was to determine the effects of different joint angles and adhesives on diagonal tension performances of the box-type furniture made from solid wood and medium density fiberboard (MDF. After drilling joints of 75º, 78º, 81º, 84º, and 87º degrees on Oriental beech, European oak, Scotch pine, and MDF samples, a diagonal tensile test was applied on corners glued with polyvinyl acetate (PVAc and polyurethane (D-VTKA = Desmodur-Vinyl Trieketonol Acetate according to ASTM D 1037 standard. With reference to the obtained results, the highest tensile strength was obtained in European oak with PVAc glue and joint angle of 84º, while the lowest value was obtained in MDF with D-VTKA glue and joint angle of 75º. Considering the interaction of wood, adhesive, and joint angle, the highest tensile strength was obtained in European oak with joint angle of 81º and D-VTKA glue (1.089 N.mm-2, whereas the lowest tensile strength was determined in MDF with joint angle of 75º and PVAc glue (0.163 N.mm-2. Therefore, PVAc as glue and 81º as joint angle could be suggested to obtain some advantageous on the dovetail joint process for box-type furniture made from both solid wood and MDF.

  4. An analysis of the effect of marital/dependency status on retention, promotion, and on-the-job productivity of male Marine Corps officers

    OpenAIRE

    Cerman, Guray; Kaya, Bulent

    2005-01-01

    Approved for public release; distribution is unlimited. This thesis investigates the effect of marital and family status on the performance and job productivity of male U.S. Marine Corps officers. The analysis includes evaluation of fitness reports, retention, and promotion to O-4 and O-5 ranks as performance measures. The primary goal is to examine the existence of any marriage premium on officers' performance and productivity and to investigate potential causal hypotheses. The personnel ...

  5. Teach yourself visually Office 2013

    CERN Document Server

    Marmel, Elaine

    2013-01-01

    Learn the new Microsoft Office suite the easy, visual way Microsoft Office 2013 is a power-packed suite of office productivity tools including Word, Excel, PowerPoint, Outlook, Access, and Publisher. This easy-to-use visual guide covers the basics of all six programs, with step-by-step instructions and full-color screen shots showing what you should see at each step. You'll also learn about using Office Internet and graphics tools, while the additional examples and advice scattered through the book give you tips on maximizing the Office suite. If you learn best when you can see how

  6. Influence of Product and Supplier Attributes on Hardwood Lumber Purchase Decisions

    Science.gov (United States)

    Craig L. Forbes; Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1994-01-01

    This study determined the influence of product and supplier attributes on hardwood lumber purchases by wood furniture manufacturers and investigated differences across manufacturer type, geographic region, firm size, and kiln ownership. Professional lumber buyers rated the importance and difference across suppliers of various attributes. Purchase influence scores were...

  7. Anthropometric evaluations and assessment of school furniture design in Nigeria: A case study of secondary schools in rural area of Odeda, Nigeria

    Directory of Open Access Journals (Sweden)

    Adekunle Ibrahim Musa

    2011-01-01

    Full Text Available This study was carried out on 621 schoolboys with age range of 12-17 years in Junior and Senior Secondary Schools in Odeda area of Odeda local government in Ogun State, Nigeria. Different anthropometric data were collected from these boys. It was observed from the results that all anthropometric dimensions of the school children increase with their age. Moreover, there exists a little difference between mean values of different anthropometric dimensions between the boys of 12-13 years (2.9% to 8.8%, 14-15 years (1.3% to 9.9%, and 16-17 years (1.4% to 5.5%. But the said differences become much higher (16.2% to 42.4% when the same were compared between the children of 12 years and 17 years. Therefore, it can be said that the design of furniture for the children of 12 years will not match the children of 17 years. If single furniture is designed by considering dimensions of the children from 12 years to 17years, it will also not suit the children of all age groups. Therefore, in the present investigation, all the students have been divided into three combined age groups, e.g., 12-13 years, 14-15 years, and 16-17 years, and the percentile values (5th, 50th and 95th of anthropometric measures, which will be helpful for designing of the classroom furniture.

  8. Office 2010 all-in-one for dummies

    CERN Document Server

    Weverka, Peter

    2010-01-01

    The leading book on Microsoft Office, now fully updated for Office 2010 Microsoft Office, the world's leading productivity suite, has been updated with new tools. Veteran Office users as well as newcomers will need the comprehensive information in this bestselling All-in-One guide. With a self-contained minibook devoted to each Office application plus minibooks on how Office works together and how you can expand its usefulness, Office 2010 All-in-One For Dummies gets you up to speed and answers the questions you'll have down the road.Microsoft Office is the office pro

  9. INVESTIGATION OF THE EFFECTS OF DIFFERENT EDGE JOINT ELEMENTS ON DIAGONAL TENSILE STRENGTH IN FURNITURE EDGE JOINTS

    Directory of Open Access Journals (Sweden)

    Arif GÜRAY

    2002-01-01

    Full Text Available In this work, the diagonal tensile strength of furniture edge joints such as wooden dowel, minifix, and alyan screw was investigated in panel-constructed boards for Suntalam and MDF Lam. For this purpose, a diagonal tensile strength test was applied to the 72 samples. According to the results, the maximum diagonal tensile strength was found to be in MDF Lam boards that jointed with alyan screw.

  10. Pengaruh Jumlah Tenaga Kerja, Bahan Baku, dan Teknologi terhadap Produksi Industri Furniture di Kota Denpasar

    OpenAIRE

    Natha, Ketut Suardikha; Prianata, Rahadian

    2014-01-01

    The development of a regional development is a process to raise the level of welfare of society. Another reason why the economic growth and development is undertaken is to be able to stimulate sectors of the economy that is growing, one of which is the industrial sector. The industrial sector is one of the few other sectors are growing rapidly in the area of ??Denpasar. One industry that is growing and is now pretty much in demand is the furniture industry. This research was conducted in the ...

  11. Health care capital market and product market constraints and the role of the chief financial officer.

    Science.gov (United States)

    Wheeler, J R; Smith, D G

    2001-01-01

    To understand better the financial management practices and strategies of modern health care organizations, we conducted interviews with chief financial officers (CFOs) of several leading health care systems. The constraints imposed on health care systems by both capital and product markets has made the role of the CFO a challenge.

  12. The impact of sit-stand office workstations on worker discomfort and productivity: a review.

    Science.gov (United States)

    Karakolis, Thomas; Callaghan, Jack P

    2014-05-01

    This review examines the effectiveness of sit-stand workstations at reducing worker discomfort without causing a decrease in productivity. Four databases were searched for studies on sit-stand workstations, and five selection criteria were used to identify appropriate articles. Fourteen articles were identified that met at least three of the five selection criteria. Seven of the identified studies reported either local, whole body or both local and whole body subjective discomfort scores. Six of these studies indicated implementing sit-stand workstations in an office environment led to lower levels of reported subjective discomfort (three of which were statistically significant). Therefore, this review concluded that sit-stand workstations are likely effective in reducing perceived discomfort. Eight of the identified studies reported a productivity outcome. Three of these studies reported an increase in productivity during sit-stand work, four reported no affect on productivity, and one reported mixed productivity results. Therefore, this review concluded that sit-stand workstations do not cause a decrease in productivity. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  13. Procurement Opportunitites in: Afghanistan and the Central Asian States (CAS)

    Science.gov (United States)

    2012-08-01

    barriers) Furniture (office and household) Prefabricated Structures (CONEXs, containerized housing units, re-locatable buildings) Office Supplies... Concrete Foundation and Structure Road Support Activities Minor Building Renovation Water and Sewer Line and Related Construction Heavy and Civil

  14. New indoor environment chambers and field experiment offices for research on human comfort, health and productivity

    DEFF Research Database (Denmark)

    Toftum, Jørn; Langkilde, Gunnar; Fanger, Povl Ole

    2004-01-01

    The article describes three new indoor environment chambers, a new laboratory for the study of air movement in spaces and five offices for controlled environment exposures of human subjects in field experiments at the International Centre for Indoor Environment and Energy, Technical University of...... of Denmark. Together with three older chambers, the Centre now has at its disposal 12 spaces for studying indoor environments and their impact on human comfort, health and productivity.......The article describes three new indoor environment chambers, a new laboratory for the study of air movement in spaces and five offices for controlled environment exposures of human subjects in field experiments at the International Centre for Indoor Environment and Energy, Technical University...

  15. Consumer exposure to chemicals in indoor environment : A specific focus on chemicals from textile products

    OpenAIRE

    Wijnhoven SWP; Kooi MW; te Biesebeek JD; SIR; vgc

    2010-01-01

    Textile products in indoor environment contain a variety of chemicals. Well-known examples are flame retardants, phthalates, formaldehyde and dimethylfumarate. Consumers are potentially exposed to these chemicals since a lot of textile products are present in indoor environment (clothing, curtains, floor covering, and upholstery of furniture) and consumers are in contact with these products for up to 24 hours a day. The Food and Consumer Product Safety Authority (VWA) commissioned RIVM to mak...

  16. Ergonomic design for dental offices.

    Science.gov (United States)

    Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

    2010-01-01

    The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

  17. Technical changes and the rate of profit in the Canadian wood, furniture, and paper industries

    OpenAIRE

    M Webber; S Tonkin

    1988-01-01

    In this paper the rate of profit is examined and the components of changes in the rate of profit are identified in the wood, furniture, and paper industries of Canada for the years 1952 to 1981. The rate of profit in the wood industry generally rose, until a dramatic fall since 1979 onwards; this fall was largely due to a collapse of market prices and to the effects of that collapse on the technical composition of capital (via changes in the rate of capacity utilization). Profit rates in the ...

  18. Guided exploration of physically valid shapes for furniture design

    KAUST Repository

    Umetani, Nobuyuki

    2012-07-01

    Geometric modeling and the physical validity of shapes are traditionally considered independently. This makes creating aesthetically pleasing yet physically valid models challenging. We propose an interactive design framework for efficient and intuitive exploration of geometrically and physically valid shapes. During any geometric editing operation, the proposed system continuously visualizes the valid range of the parameter being edited. When one or more constraints are violated after an operation, the system generates multiple suggestions involving both discrete and continuous changes to restore validity. Each suggestion also comes with an editing mode that simultaneously adjusts multiple parameters in a coordinated way to maintain validity. Thus, while the user focuses on the aesthetic aspects of the design, our computational design framework helps to achieve physical realizability by providing active guidance to the user. We demonstrate our framework on plankbased furniture design with nail-joint and frictional constraints. We use our system to design a range of examples, conduct a user study, and also fabricate a physical prototype to test the validity and usefulness of the system. © 2012 ACM 0730-0301/2012/08- ART86.

  19. A Planetarium Inside Your Office: Virtual Reality in the Dome Production Pipeline

    Science.gov (United States)

    Summers, Frank

    2018-01-01

    Producing astronomy visualization sequences for a planetarium without ready access to a dome is a distorted geometric challenge. Fortunately, one can now use virtual reality (VR) to simulate a dome environment without ever leaving one's office chair. The VR dome experience has proven to be a more than suitable pre-visualization method that requires only modest amounts of processing beyond the standard production pipeline. It also provides a crucial testbed for identifying, testing, and fixing the visual constraints and artifacts that arise in a spherical presentation environment. Topics adreesed here will include rendering, geometric projection, movie encoding, software playback, and hardware setup for a virtual dome using VR headsets.

  20. Assessment of occupational exposure to wood dust in the Polish furniture industry

    Directory of Open Access Journals (Sweden)

    Małgorzata Szewczyńska

    2017-02-01

    Full Text Available Background: Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Material and Methods: Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Results: Total dust concentrations were 0.84–13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34–22.13 mg/m3. Respirable fraction concentrations were 0.38–4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. Conclusions: The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1:45–60

  1. [Assessment of occupational exposure to wood dust in the Polish furniture industry].

    Science.gov (United States)

    Szewczyńska, Małgorzata; Pośniak, Małgorzata

    2017-02-28

    Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  2. Smart and Sustainable Offices (SSO: Showcasing a holistic approach to realise the next generation offices

    Directory of Open Access Journals (Sweden)

    A. Cobaleda Cordero

    2018-01-01

    Full Text Available The Smart Sustainable Offices project (SSO is a product of years of research with large sets of data collected from more than 30 office buildings in Switzerland, Sweden, and Spain. Based on scientific evidence, the concept of SSO, initially conceived as a research plan to address the interdependencies between office users and their working environment in a European context, is now used as a qualitative and quantitative mixed method approach for office diagnosis and ideation. At the current stage, the SSO methodology aims to implement a new paradigm of user-oriented, lower carbon footprint and resilient office design solutions. The main strategy is articulated around the “office DNA” of every organisation, decoded as a compound of work patterns, operational and individual needs, and their potential to define design criteria. The practical application of SSO and its tentative findings exemplified through three pilot test office-demonstrators are described in this paper.

  3. Move smoothly to Office 2007 or 2010

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Overview of the user interface of Office 2007 and Office 2010 programs: Word, Excel, Powerpoint and Outlook. Special attention will be drawn to: changes of the user interface as compared with Office 2003, new features that improve user-productivity. At the beginning of the presentation, the demonstrations will focus on Office 2007, which is available on both Windows XP and Windows 7. Towards the end, the demonstrations will focus on Office 2010, which will soon become the default version of Office on Windows 7. Video and slides of the presentation: http://indico.cern.ch/conferenceDisplay.py?confId=95532-->

  4. Charcoal production technologies: Environmental and socio-economic impacts with Brazilian examples

    International Nuclear Information System (INIS)

    Paula Fernandes, M. de.

    1991-01-01

    The indirect use of solar energy through photosynthesis, wood and charcoal requires reforestation with fast-growing species to supply continuously charcoal for industrial and domestic needs. This concept, sometimes referred to as an energy farms, is the conversion of sunshine into food, fibre, furniture, paper and pulp products. It the charcoal production uses primitive, low-yield technologies, it endangers the economic viability of the wood energy source and causes negative environmental impacts. 19 refs, 4 figs, 3 tabs

  5. [Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

    Science.gov (United States)

    Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

    2008-01-01

    In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

  6. Advanced oxidation-based treatment of furniture industry wastewater.

    Science.gov (United States)

    Tichonovas, Martynas; Krugly, Edvinas; Grybauskas, Arturas; Jankūnaitė, Dalia; Račys, Viktoras; Martuzevičius, Dainius

    2017-07-16

    The paper presents a study on the treatment of the furniture industry wastewater in a bench scale advanced oxidation reactor. The researched technology utilized a simultaneous application of ozone, ultraviolet radiation and surface-immobilized TiO 2 nanoparticle catalyst. Various combinations of processes were tested, including photolysis, photocatalysis, ozonation, catalytic ozonation, photolytic ozonation and photocatalytic ozonation were tested against the efficiency of degradation. The efficiency of the processes was primarily characterized by the total organic carbon (TOC) analysis, indicating the remaining organic material in the wastewater after the treatment, while the toxicity changes in wastewater were researched by Daphnia magna toxicity tests. Photocatalytic ozonation was confirmed as the most effective combination of processes (99.3% of TOC reduction during 180 min of treatment), also being the most energy efficient (4.49-7.83 MJ/g). Photocatalytic ozonation and photolytic ozonation remained efficient across a wide range of pH (3-9), but the pH was an important factor in photocatalysis. The toxicity of wastewater depended on the duration of the treatment: half treated water was highly toxic, while fully treated water did not possess any toxicity. Our results indicate that photocatalytic ozonation has a high potential for the upscaling and application in industrial settings.

  7. Usability Considerations in Developing a Graphic Interface for Intra Office Communications

    Science.gov (United States)

    Yammiyavar, Pradeep; Jain, Piyush

    This paper outlines the basis of incorporating functional features in a new GUI based software under development for addressing comprehensive communication and interaction needs within an office environment. Bench marking of features in existing communication software products such as Microsoft Outlook, IBM Lotusnotes, Office Communicator, Mozilla Thunderbird etc. was done by asking a set of questions related to the usage of these existing softwares. Usability issues were identified through a user survey involving 30 subjects of varied profiles (domain, designation, age etc.) in a corporate office. It is posited that existing software products that have been developed for a universal market may be highly underutilized or have redundant features especially for use as an intra office (within the same office) communication medium. Simultaneously they may not cater to some very contextual requirements of intra office communications. Based on the findings of the survey of feature preferences & usability of existing products, a simple 'person to person' communicating medium for intra office situations was visualized with a new interactive GUI. Usability issues that need to be considered for a new intra-office product have been brought out.

  8. 16 CFR 1502.18 - Presiding officer.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Presiding officer. 1502.18 Section 1502.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... officer in a hearing will be an administrative law judge qualified under 5 U.S.C. 3105. ...

  9. Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

    2017-01-01

    Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings....

  10. Chlorinated organophosphate and “legacy” brominated flame retardants in UK waste soft furnishings: A preliminary study

    Directory of Open Access Journals (Sweden)

    William A. Stubbings

    2016-12-01

    Full Text Available The Furniture and Furnishings (Fire Safety Regulations 1988 is the major driver for the use of chemical flame retardants (FRs in soft furnishings marketed in the UK. While these regulations specify the level of flame retardancy required, they do not specify how such levels should be achieved. Consequently, it remains unclear which FRs are present in UK soft furnishings. This is important not only to help assess what FRs we may be exposed to currently, but which FRs are currently entering the waste stream with concomitant potential for release into the environment. To address this data gap, concentrations of polybrominated diphenyl ethers (PBDEs, hexabromocyclododecane (HBCDD and a range of chlorinated organophosphate flame retardants (OPFRs were measured in samples of domestic and office waste soft furnishings products entering the UK waste stream in 2011 and 2012. This preliminary study measured the FR content of: carpets (n = 4, curtains (n = 7, mattress fabrics (n = 2, furniture foam (n = 9, and furniture upholstery textiles (n = 10. Polybrominated diphenyl ethers (PBDEs and hexabromocyclododecane (HBCDD were not found at significant concentrations (below detection limits in most samples in any of the twenty two analysed products. In contrast, 7 of the 9 furniture foam samples were treated with tris(2-chloroisopropylphosphate (TCIPP at a mean concentration of 1.9% w/w, with another single foam sample containing tris(1,3-dichloroisopropylphosphate (TDCIPP and tris(2-chloroethylphosphate (TCEP at 1.1 and 0.5% respectively. By comparison, PBDE concentrations are within the range reported previously for UK indoor dust [18], rather than the percent by weight levels required to impart flame retardancy.

  11. The need for an established allocation method when assessing absolute sustainability on a product level

    DEFF Research Database (Denmark)

    Ryberg, Morten; Owsianiak, Mikolaj; Hauschild, Michael Zwicky

    2015-01-01

    Assessment of absolute sustainability within life cycle assessment (LCA) framework is operational on the country scale. However, it is difficult to apply the existing approaches to products, which are typically the scope of LCAs. How should we assess whether a chair is (absolutely) sustainable? I...... allocation keys specific to each product group, e.g. mass for furniture, or economic revenue for IT. The proposed method facilitates assessment of absolute sustainability of products within the LCA framework....

  12. Learn Office 2011 for Mac OS X

    CERN Document Server

    Hart-Davis, Guy

    2011-01-01

    Office for Mac remains the leading productivity suite for Mac, with Apple's iWork and the free OpenOffice.org trailing far behind. And now it's being updated with a cleaner interface and more compatibility with Exchange and SharePoint. Learn Office 2011 for Mac OS X offers a practical, hands-on approach to using Office 2011 applications to create and edit documents and get work done efficiently. You'll learn how to customize Office, design, create, and share documents, manipulate data in a spreadsheet, and create lively presentations. You'll also discover how to organize your email, contacts,

  13. Self-reported sitting time and physical activity: interactive associations with mental well-being and productivity in office employees.

    Science.gov (United States)

    Puig-Ribera, Anna; Martínez-Lemos, Iván; Giné-Garriga, Maria; González-Suárez, Ángel Manuel; Bort-Roig, Judit; Fortuño, Jesús; Muñoz-Ortiz, Laura; McKenna, Jim; Gilson, Nicholas D

    2015-01-31

    Little is known about how sitting time, alone or in combination with markers of physical activity (PA), influences mental well-being and work productivity. Given the need to develop workplace PA interventions that target employees' health related efficiency outcomes; this study examined the associations between self-reported sitting time, PA, mental well-being and work productivity in office employees. Descriptive cross-sectional study. Spanish university office employees (n = 557) completed a survey measuring socio-demographics, total and domain specific (work and travel) self-reported sitting time, PA (International Physical Activity Questionnaire short version), mental well-being (Warwick-Edinburg Mental Well-Being Scale) and work productivity (Work Limitations Questionnaire). Multivariate linear regression analyses determined associations between the main variables adjusted for gender, age, body mass index and occupation. PA levels (low, moderate and high) were introduced into the model to examine interactive associations. Higher volumes of PA were related to higher mental well-being, work productivity and spending less time sitting at work, throughout the working day and travelling during the week, including the weekends (p employees, higher sitting times on work days and occupational sitting were associated with decreased mental well-being (p employees. Employees' PA levels exerts different influences on the associations between sitting time, mental well-being and work productivity. The specific associations and the broad sweep of evidence in the current study suggest that workplace PA strategies to improve the mental well-being and productivity of all employees should focus on reducing sitting time alongside efforts to increase PA.

  14. Determinants of Corporate Performance: A Study on Furniture Companies in Jepara Indonesia

    Directory of Open Access Journals (Sweden)

    Amron A.

    2015-03-01

    Full Text Available The aims of this research were to analyze corporate performance through learning orientation, leader’s characteristics, market orientation, and innovation in furniture industries in Jepara, Indonesia. The samples in this research were 110 small and medium enterprises. Based on SEM analysis results, the seven research hypothesis used were; (1 learning orientation has significant effect on corporate performance; (2 learning orientation has significant effect on innovation; (3 leader’s characteristics do not have significant effect on corporate performance; (4 leader’s characteristics have significant effect on innovation; (5 market orientation has significant effect on innovation; (6 market orientation has significant effect on corporate performance; (7 Innovation does not have significant effect on corporate performance. After the test and analysis, it was found that five out of the seven hypotheses were accepted and two out of them were rejected.

  15. Leaching of TCIPP from furniture foam is rapid and substantial.

    Science.gov (United States)

    Stubbings, William A; Harrad, Stuart

    2018-02-01

    A series of laboratory experiments were conducted, in which waste furniture polyurethane foam samples containing tris (1-chloro-2-propyl) phosphate (TCIPP) were contacted with a range of leaching fluids, formulated to simulate the composition of landfill leachate. Leaching was examined under a number of different scenarios, such as: dissolved humic matter concentration, pH, and temperature, as well as the effect of agitation, and waste:leaching fluid contact duration. In addition to single batch (no replenishment of leaching fluid), serial batch (draining of leachate and replenishment with fresh leaching fluid at various time intervals) experiments were conducted. Leaching of TCIPP from PUF appears to be a first order process. Concentrations of TCIPP in leachate generated by the experiments in this study ranged from 13 mg L -1 to 130 mg L -1 . In serial batch leaching experiments, >95% of TCIPP was depleted from PUF after 168 h total contact with leaching fluid. Our experiments indicate leaching is potentially a very significant pathway of TCIPP emissions to the environment. Copyright © 2017. Published by Elsevier Ltd.

  16. What's New with MS Office Suites

    Science.gov (United States)

    Goldsborough, Reid

    2012-01-01

    If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

  17. The effect of sub-floor heating on house-dust-mite populations on floors and in furniture.

    Science.gov (United States)

    de Boer, Rob

    2003-01-01

    It is well known that dehydrating conditions for house dust mites can be created by simply raising the temperature, causing loss of body water and eventually death. Thus, it can be expected that conditions for dust mites are less favourable on floors supplied with sub-floor heating. This was examined in a study of 16 houses with sub-floor heating and 21 without. The pattern of changes in air humidity and temperature on the floors was investigated and compared to known data of the tolerance of dust mites. Also the resident mite populations were compared. Floors with sub-floor heating had, on average, fewer mites, but the difference with unheated floors was small. It was remarkable that mite numbers were also lower in upholstered furniture. Another important observation was that some houses with sub-floor heating had high mite numbers, indicating that this type of heating is compatible with a thriving mite population. Temperature and humidity conditions of heated floors may allow mites not only to survive, but also to remain active in winter. A moderate increase in temperature, a moderate decrease in (absolute) air humidity, or a combination of both, will suffice to keep the humidity all winter below the Critical Equilibrium Humidity, the level of air humidity that is critical for mite growth and reproduction, hence for allergen production. However, it is argued that measures to suppress allergen production by house dust mites are likely to be far more effective if taken in summer rather than in winter.

  18. Knowledge Management as a Determining Factor in the Retention of Professionals in the Industry: A Case Study in an Organization in the Furniture Industry

    Directory of Open Access Journals (Sweden)

    Osmarina Pedro Garcia Garcia

    2017-01-01

    Full Text Available This study investigates which one(s of the knowledge management factor(s, via the tacit and/ or explicit way, are crucial in retaining professionals in a company in the furniture industry. The research was exploratory, with lifting procedure, and qualitative and quantitative approach. Data were collected from June to August 2014 in a furniture industry of Francisco Beltrão/PR, through a questionnaire applied to 224 employees of administrative, industrial and commercial areas, as follows: 11 managers, 44 responsible for the area and 169 operational employees. The Likert scale detected the frequency of respondents’ views. To provide consistency to the findings, the data obtained Multivariate Analysis statistical treatment, developed in the free R software. We applied the Main Component Analysis, Factorial Analysis, Correspondence Analysis, Correlation Analysis and Chi-squared Test separately for tacit and explicit ways. After the analysis, we concluded that through the factors shown in the study, both pathways influence the retention of employees of the surveyed company.

  19. Preliminary study on the gamma radiation on the furniture carpet beetle Anthrenus flavipes LeConte (Coleoptera : Dermestidae)

    International Nuclear Information System (INIS)

    Hamad, B.Sh.; Khalaf, M.Z.; Jumaa, H.M.; Yasseen, N.H.; Al-Taweel, A.A.

    2006-01-01

    Preliminary study on the possibility of using gamma radiation to induce sexual sterility in males of the furniture carpet beetle A. Flavipes was carried out as a part of programme aiming to use SIT in controlling this pest. Results indicated that the induction of complete sterility in males was occurred by irradiated them as adults (24 hours old) by 100, 130 and 150 Gy. Furthermore, Results also showed that there was reducing in average number eggs laid by female that mated with irradiated male in comparison with females that matted with normal males

  20. Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan

    Science.gov (United States)

    James A. Turner; Joseph Buongiorno; Shushuai Zhu; Frances Maplesden

    2008-01-01

    Secondary processed wood products - builder's carpentry and joinery, moldings and millwork, wooden furniture, and prefabricated buildings - have grown significantly in importance in the global trade of wood products. At the same time there has been increased use of non-tariff barriers to restrict their trade.  These barriers could have an important impact on the...

  1. 77 FR 74643 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

    Science.gov (United States)

    2012-12-17

    ... 60554. components for several industries including automotive and appliances. Transformer Manufacturers... telecommunications, industrial control, and audio electronics industries. Inwood Office Furniture, Inc. d/b/a 1108...

  2. Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions.

    Science.gov (United States)

    Williams, Daniel R; Tang, Yinshan

    2013-05-07

    Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft's cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

  3. OBJECTIVES AND INCENTIVES AT THE EUROPEAN PATENT OFFICE

    DEFF Research Database (Denmark)

    Friebel, Guido; Koch, Alexander; Seabright, Paul

    This report examines the effectiveness of the current system of incentives within the European Patent Office (EPO) and considers the possible consequences of placing greater emphasis on quantitative measures of productivity in rewarding EPO staff.......This report examines the effectiveness of the current system of incentives within the European Patent Office (EPO) and considers the possible consequences of placing greater emphasis on quantitative measures of productivity in rewarding EPO staff....

  4. Office design and health: a systematic review.

    Science.gov (United States)

    Richardson, Ann; Potter, John; Paterson, Margaret; Harding, Thomas; Tyler-Merrick, Gaye; Kirk, Ray; Reid, Kate; McChesney, Jane

    2017-12-15

    To carry out a systematic review of recent research into the effects of workplace design, comparing individual with shared workspaces, on the health of employees. The research question was "Does workplace design (specifically individual offices compared with shared workspaces) affect the health of workers?" A literature search limited to articles published between 2000 and 2017 was undertaken. A systematic review was carried out, and the findings of the reviewed studies grouped into themes according to the primary outcomes measured in the studies. The literature search identified 15 relevant studies addressing health effects of shared or open-plan offices compared with individual offices. Our systematic review found that, compared with individual offices, shared or open-plan office space is not beneficial to employees' health, with consistent findings of deleterious effects on staff health, wellbeing and productivity. Our findings are also consistent with those of earlier reviews. These findings have public health implications for the New Zealand workforce. Decisions about workplace design should include weighing the short-term financial benefits of open-plan or shared workspaces against the significant harms, including increased sickness absence, lower job satisfaction and productivity, and possible threats to recruitment and retention of staff.

  5. Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?

    Directory of Open Access Journals (Sweden)

    Małgorzata Pawlaczyk-Łuszczyńska

    2016-06-01

    Full Text Available Background: The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL. Material and Methods: Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20–57 years, directly employed in the manufacture of furniture. The actual workers’ hearing threshold levels (HTLs were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Results: Workers under study were exposed to noise at daily noise exposure levels of 82.7–94.8 dB (mean: 90.9 dB for a period of 3–14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers’ HTLs at 3000–6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg and lower (≤ 78 mm Hg diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. Conclusions: The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3:337–351

  6. [Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?].

    Science.gov (United States)

    Pawlaczyk-Łuszczyńska, Małgorzata; Dudarewicz, Adam; Czaja, Norman; Bortkiewicz, Alicja

    The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL). Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20-57 years, directly employed in the manufacture of furniture. The actual workers' hearing threshold levels (HTLs) were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Workers under study were exposed to noise at daily noise exposure levels of 82.7-94.8 dB (mean: 90.9 dB) for a period of 3-14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers' HTLs at 3000-6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg) and lower (≤ 78 mm Hg) diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3):337-351. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  7. Efficiency assessment of indoor environmental policy for air-conditioned offices in Hong Kong

    International Nuclear Information System (INIS)

    Wong, L.T.; Mui, K.W.

    2009-01-01

    To reduce carbon dioxide (CO 2 ) emissions through thermal energy conservation, air-conditioned offices in the subtropics are recommended to operate within specified ranges of indoor temperature, relative humidity and air velocity. As thermal discomfort leads to productivity loss, some indoor environmental policies for air-conditioned offices in Hong Kong are investigated in this study with relation to thermal energy consumption, CO 2 emissions from electricity use, and productivity loss due to thermal discomfort. Occupant thermal response is specifically considered as an adaptive factor in evaluating the energy consumption and productivity loss. The energy efficiency of an office is determined by the productivity which corresponds to the CO 2 generated. The results found that a policy with little impact on occupant thermal comfort and worker productivity would improve the office efficiency while the one with excessive energy consumption reduction would result in a substantial productivity loss. This study is a useful reference source for evaluating an indoor thermal environmental policy regarding the energy consumption, CO 2 emissions reduction, thermal comfort and productivity loss in air-conditioned offices in subtropical areas.

  8. Heat treatment of the common furniture beetle Anobium punctatum (Coleoptera: Anobiidae), at temperature between 45 degrees and 54 degrees C. under dry and humid conditions

    DEFF Research Database (Denmark)

    Hansen, Lise Stengaard; Jensen, Karl-Martin Vagn

    1998-01-01

    The combinations of exposure times and temperatures (45 degrees to 54 degrees C.) without addition of moisture necessary to obtain 100 per cent mortality were determined on all stages of commn furniture beetle, Anobium punctatum. Lethal combinations vary from minutes at 46 degrees to 5 minutes...

  9. Structuring front-end innovation activities throughout strategic product planning

    Directory of Open Access Journals (Sweden)

    Thaisa Rodrigues

    Full Text Available Abstract Strategic product planning (SPP for new product development (NPD in the front-end of innovation (FEI is a great challenge for managers and practitioners. This article analyzes the structuring process of FEI activities during SPP. A research was carried out with 78 industries from both food and furniture in Brazil. Our study revealed that FEI activities are structured in an intricate network with a high level of complexity and interdependence. The large amount of activities and the complexity in structuring them denote that companies are concerned to reduce uncertainties and risks intensifying the planning phase.

  10. Penerapan Enterprise Resource Planning (ERP Pengadaan Bahan Baku dan Pengelolaan Produksi Pada Perusahaan Furniture Menggunakan ADempiere (Studi Kasus: CV Roland Kencana

    Directory of Open Access Journals (Sweden)

    Hasdi Putra

    2016-12-01

    Full Text Available In this era of global competition, companies need to shorten the production cycle, responsive to market dynamics and customer demand and to strengthen information exchange system. In this competitive environment, Enterprise Resource Planning (ERP is very helpful in integrating the management of all the company's resources. In manufacturing companies such as furniture, raw materials shall be made available for the production process. Shortages of raw materials can be anticipated early through inventory information that can be accessed quickly and accurately so that the business process is still running. This study aims to assist companies in implementing ERP systems by proposing strategies and tactics to overcome the problems encountered in implementing ERP systems. ADempiere as one ERP applications can help manage the transaction data and inventory business processes to improve corporate performance. The stages are carried out in this research is to identify problems, analyze business processes, election ADempiere application modules, implementation and testing of applications. Business processes are identified consisting of sales, purchasing and production. The results of analysis of business processes described in the Business Process Modeling Notation (BPMN and a working model of the system is shown by the use case diagram. System test results obtained by comparing the ERP system using the manual system. The test results prove that ADempiere can produce the raw material inventory information in real time, generate transaction reports purchases, sales, production, and financial reports automatically so that it can help company leaders make decisions quickly and accurately.

  11. Geração de resíduos de madeira e derivados da indústria moveleira em função das variáveis de produção Generation of wood waste and derivatives on furniture industry related to production's variables

    Directory of Open Access Journals (Sweden)

    Éverton Hillig

    2009-01-01

    Full Text Available Os processos produtivos da cadeia madeira-móveis geram quantidades significativas de resíduos de madeira, os quais nem sempre têm uma destinação correta. O potencial de aproveitamento destes resíduos é significativo, quer seja como matéria-prima secundária, quer seja pelo seu potencial energético. O gerenciamento dos resíduos é um dos desafios à gestão e ao desempenho ambiental das empresas. Neste trabalho, utilizou-se a análise multivariada, com extração de componentes principais, para analisar os carregamentos de cada variável original e identificar as principais variáveis que apresentam similaridades em relação à geração de resíduos. As variáveis de produção consideradas foram: quantidade de matéria-prima consumida, número de colaboradores, número de máquinas, consumo de energia e consumo de água. Por meio de regressão linear, utilizando o método stepwise, foram obtidas as equações de estimativa dos resíduos em função das variáveis de produção originais, resultando na quantidade de resíduo gerado por classe de matéria-prima, para determinada empresa ou determinado município pesquisado. A estimativa de geração foi aplicada ao Pólo Moveleiro da Serra Gaúcha/RS.The production processes of furniture industry generate significant amounts of wood waste, which has not always a correct destination. The potential for exploitation of these residues is significant, whether as secondary raw material, whether by its energy potential. The management of this waste is one of the challenges for the management and environmental performance of companies. This work used multivariate analysis with the extraction of key components, to analyze the load of each original variable and identify key variables that have similarities in relation to the waste generation. The variables of production considered was: quantity of raw materials consumed, number of employees, number of machines, energy consumption and water

  12. Metalúrgica Longra (1920-1993 : ancoragem para um estudo sob os regimes de acção

    Directory of Open Access Journals (Sweden)

    M. Otília P. Lage

    2007-01-01

    Full Text Available Built upon two levels – the factual and the critically referential –, this history of Longra Steelworks (Metalúrgica da Longra – M.L.: workshop, factory, company – congregates a diversified plurality of discourses united in empirical and theoretical research, a documentary corpus necessary for the factory’s structural approach. Appearing in 1920, in a rural space (Felgueiras, in 1970 is one of Portugal’s leading companies in the office furniture and industrial furniture design sector.

  13. Neutral buoyancy testing of architectural and environmental concepts of space vehicle design

    Science.gov (United States)

    Lenda, J. A.; Rosener, A. A.; Stephenson, M. L.

    1972-01-01

    Design guidelines are presented that are applicable to providing habitability areas and furniture elements for extended periods in a zero gravity environment. This was accomplished by: (1) analyzing the existing habitability crew area requirements, mobility and restraint aids, cross-cultural design, and establishing a man model for zero gravity; (2) designing specific furniture elements, chair and table, and volumes for a stateroom, office, bathroom, galley, and wardroom; and (3) neutral buoyancy testing and evaluation of these areas.

  14. Contrast of Korean industrial standard and overseas standard

    International Nuclear Information System (INIS)

    Kim, Jong Deuk

    2006-12-01

    This book introduces Korean Industrial Standard and Overseas Standard, which deals with furniture, plasticizers, valcaning agents, gaskets, steel pipes and tubes. It covers wooden furniture for offices, washing dresser, children crib, chairs and desks for students, chairs and desks made from synthetic resins, tricresyl phosphate, dibutyl phthalate, dioctyl phthalate, phtalic acid dieptil, V packing, vulcanization accelerator CBS(CZ), vulcanization accelerator MBT(M), vulcanization accelerator Zn BDC, steel pipe for heating furnace and carbon steel pope for high voltage piping.

  15. 76 FR 80451 - Commercial and Industrial Solid Waste Incineration Units: Reconsideration and Proposed Amendments...

    Science.gov (United States)

    2011-12-23

    ... Gas The Court U.S. Court of Appeals for the District of Columbia Circuit CSA Canadian Standards... furniture and related products. 325, 326 Manufacturers of chemicals and allied products; manufacturers of... Transportation Equipment Manufacturing. 337 Furniture and Related Product Manufacturing. 339 Miscellaneous...

  16. FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

    International Nuclear Information System (INIS)

    1994-10-01

    The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE's goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD's RDDT and E

  17. Environmental Labels and Declarations

    DEFF Research Database (Denmark)

    Frydendal, Jeppe; Hansen, Lisbeth; Bonou, Alexandra

    2018-01-01

    Based on the terminology and structure developed by the International Organization for Standardization, a description is given on the types of ecolabels that build on life cycle assessments. Focus is on type I labels that point out products and services with an overall environmental preferability...... of labelling, the use of ecolabels in marketing, and the way ecolabels help build a market for “greener products”. Type III labels—or Environmental Product Declarations—are also briefly described with indicative examples from the building sector, a declaration for office furniture, and an introduction is given...... to the European Commission’s programme for product—and organisational environmental footprints ....

  18. 7 CFR 1486.402 - What are ineligible contributions?

    Science.gov (United States)

    2010-01-01

    ... CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS EMERGING MARKETS PROGRAM... office equipment and furniture; (9) The value of any services generated by a third party which involve no...

  19. 7 CFR 1484.51 - What are ineligible contributions?

    Science.gov (United States)

    2010-01-01

    ... MARKETS FOR AGRICULTURAL COMMODITIES Contributions and Reimbursements § 1484.51 What are ineligible... permanent structures, real estate, and the purchase of office equipment and furniture; (11) The value of any...

  20. Field-portable-XRF reveals the ubiquity of antimony in plastic consumer products.

    Science.gov (United States)

    Turner, Andrew; Filella, Montserrat

    2017-04-15

    Very little systematic information exists on the occurrence and concentrations of antimony (Sb) in consumer products. In this study, a Niton XL3t field-portable-X-ray fluorescence (FP-XRF) spectrometer was deployed in situ and in the laboratory to provide quantitative information on Sb dissipated in plastic items and fixtures (including rubber, textile and foamed materials) from the domestic, school, vehicular and office settings. The metalloid was detected in 18% of over 800 measurements performed, with concentrations ranging from about 60 to 60,000μgg -1 . The highest concentrations were encountered in white, electronic casings and in association with similar concentrations of Br, consistent with the use of antimony oxides (e.g. Sb 2 O 3 ) as synergistic flame retardants. Concentrations above 1000μgg -1 , and with or without Br, were also encountered in paints, piping and hosing, adhesives, whiteboards, Christmas decorations, Lego blocks, document carriers, garden furniture, upholstered products and interior panels of private motor vehicles. Lower concentrations of Sb were encountered in a wide variety of items but its presence (without Br) in food tray packaging, single-use drinks bottles, straws and small toys were of greatest concern from a human health perspective. While the latter observations are consistent with the use of antimony compounds as catalysts in the production of polyethylene terephthalate, co-association of Sb and Br in many products not requiring flame retardancy suggests that electronic casings are widely recycled. Further research is required into the mobility of Sb when dissipated in new, recycled and aged polymeric materials. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

    Science.gov (United States)

    David L. Nicholls; Joseph. Roos

    2006-01-01

    The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

  2. Workers' dermal exposure to UV-curable acrylates in the furniture and Parquet industry.

    Science.gov (United States)

    Surakka, J; Lindh, T; Rosén, G; Fischer, T

    2000-12-01

    The use of ultraviolet radiation-curable coatings (UV-coatings) has increased rapidly in the parquet and furniture industry. Work with UV-coatings involves risk from skin exposure to chemically reactive, concentrated acrylates that are known skin contact irritants and sensitizers. Yet, the methods and tools for measuring and quantifying dermal exposure from hazardous chemicals directly on the skin are limited and methods to measure skin exposure to UV-coatings in occupational or environmental settings have been lacking. Skin exposure to UV-coatings was measured employing a quantitative tape stripping method that we have developed for this purpose. A pilot study was performed at three workplaces. In the main study, workers' skin exposure to uncured UV-coatings was measured at seven workplaces and on two separate workdays (rounds 1 and 2) within a six-month period to determine exposure variation. Skin exposure was measured at four standardized sites on the hand, 3-4 times per work shift. The forehead was sampled once. A questionnaire was carried out with the workers in both rounds to find out factors that can affect skin exposure to UV-coatings. The pilot study indicated that both skin and surface contamination to TPGDA-containing UV-coatings were common and varied up to 2110 microgram on the sampling area of 10cm(2). In the main study skin contamination due to TPGDA was found on 16 of 23 workers, at 6 out of the 7 workplaces, and from 36 (5. 4%) of the 664 samples. In round one 8.6% (n=383) of the samples contained TPGDA and in round two 1.1 % (n=281). The average TPGDA mass on all the positive samples (n=36) was 30.4+/-77.0 microgram for the first and second rounds alone this mass was 30.6+/-80 (n=33) and 28.3+/-16.5 microgram (n=3), respectively. Despite the limited sampling area and sampling sites, we could find residues of TPGDA at all sampling times, even at the beginning of the work shift. This may be due to transfer of UV-coatings through contaminated

  3. 11 CFR 114.9 - Use of corporate or labor organization facilities.

    Science.gov (United States)

    2010-01-01

    ... producing such materials in the commercial market. (d) Use or rental of corporate or labor organization... telephones or typewriters or borrowing office furniture, for activity in connection with a Federal election...

  4. Impact of surface disinfection and sterile draping of furniture on room air quality in a cardiac procedure room with a ventilation and air-conditioning system (extrusion airflow, cleanroom class 1b (DIN 1946-4)).

    Science.gov (United States)

    Below, Harald; Ryll, Sylvia; Empen, Klaus; Dornquast, Tina; Felix, Stefan; Rosenau, Heike; Kramer, Sebastian; Kramer, Axel

    2010-09-21

    In a cardiac procedure room, ventilated by a ventilation and air-conditioning system with turbulent mixed airflow, a protection zone in the operating area could be defined through visualization of airflows. Within this protection zone, no turbulence was detectable in the room air.Under the given conditions, disinfection of all surfaces including all furniture and equipment after the last operation and subsequent draping of furniture and all equipment that could not be removed from the room with sterile surgical drapes improved the indoor room air quality from cleanroom class C to cleanroom class B. This also allows procedures with elevated requirements to be performed in room class 1b.

  5. A descriptive study of chiropractors' opinions and practices regarding office-based health product sales

    Directory of Open Access Journals (Sweden)

    Page Stacey A

    2012-04-01

    Full Text Available Abstract Background Although the sale of non-prescription health products is ubiquitous, the views of health professionals, such as chiropractors, regarding the sale of such products are not well known. Practitioner opinion is important to understand and inform professional practice. The purpose of this study was to describe chiropractors' perspectives and practices on the sale of health care products from practitioners' offices. Methods Chiropractors were invited to provide written comments about health product sales at the end of a fixed choice, mailed survey. Respondents' comments were analyzed using qualitative description. Ethics approval was received from the Conjoint Health Research Ethics Board at the University of Calgary. Results One hundred seven of the 265 respondents (response rate of 51% provided written comments. Approximately 30 pages of double-spaced, typed text were gathered. Respondents did not consistently endorse or condemn health product sales, and engaged in the practice to greater and lesser extents. While some were opposed to health products sales, some accepted the practice with a degree of ambivalence whereas others clearly embraced it. Some respondents acknowledged a professional conflict of interest in such sales and marketing, and described strategies used to mitigate it. Others provided a range of justifications for the practice. Personal integrity and professional standards were discussed and a need for monitoring identified. Conclusions A wide range of opinions and practices were described and this is consistent with resulting variation in practice. In light of this, standards that facilitate consistency in practice may benefit professionals and the public alike.

  6. Biorefinery production of poly-3-hydroxybutyrate using waste office paper hydrolysate as feedstock for microbial fermentation.

    Science.gov (United States)

    Neelamegam, Annamalai; Al-Battashi, Huda; Al-Bahry, Saif; Nallusamy, Sivakumar

    2018-01-10

    Waste paper, a major fraction of municipal solid waste, has a potential to serve as renewable feedstock for the biorefineries of fuels, chemicals and materials due to rich in cellulose and abundant at low cost. This study evaluates the possibility of waste office paper (WOP) to serve as a potential feedstock for the biorefinery production of poly (3-hydroxybutyrate). In this study, the WOP was pretreated, enzymatically saccharified and the hydrolysate was used for PHB production. The hydrolysate mainly consists of glucose (22.70g/L) and xylose (1.78g/L) and the corresponding sugar yield was about 816mg/g. Ammonium sulphate and C/N ratio 20 were identified as most favorable for high yield of PHB. The batch fermentation of Cupriavidus necator using the pretreated WOP hydrolysate resulted in cell biomass, PHB production and PHB content of 7.74g/L, 4.45g/L and 57.52%, respectively. The volumetric productivity and yield achieved were 0.061g/L/h and 0.210g/g sugar, respectively. The results suggested that WOP could be a potential alternative feedstock for the biorefinery production of bioplastics. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Office 2008 for Mac for dummies

    CERN Document Server

    LeVitus, Bob

    2013-01-01

    Office 2008 for Mac is here, with great new enhancements to all your favorite office productivity tools. Who better than "Dr. Mac, "Bob LeVitus, to show you how to load and use them all? From choosing the best version for your needs to managing your life with your online calendar, Office 2008 For Mac For Dummies covers what you need to know. It compares the Student/Teacher Edition, Standard Edition, and Professional Edition, then walks you through installing your preferred version and keeping it up to date. You'll find out all the things you can do with Word, Excel, PowerPoint, and Entourage,

  8. Behavioral and Organizational Issues of Office Automation Technology.

    Science.gov (United States)

    Regan, Elizabeth A.

    1984-01-01

    This study addressed behavioral and organizational issues related to office automation technology. Data from a national sample of 383 organizations were analyzed to determine if the manner in which organizations designed and managed office support made a difference in the job satisfaction and productivity of support personnel. Research…

  9. Product screening for sources of halogenated flame retardants in Canadian house and office dust

    Energy Technology Data Exchange (ETDEWEB)

    Abbasi, Golnoush [Department of Geography, University of Toronto, 100 St. George St., Toronto M5S 3G3 (Canada); Saini, Amandeep [Department of Physical and Environmental Sciences, University of Toronto, 1265 Military Trail, Toronto M1C 1A4 (Canada); Goosey, Emma [Department of Earth Sciences, University of Toronto, 22 Russell Street, Toronto M5S 3B1 (Canada); Diamond, Miriam L., E-mail: miriam.diamond@utoronto.ca [Department of Earth Sciences, University of Toronto, 22 Russell Street, Toronto M5S 3B1 (Canada); Department of Physical and Environmental Sciences, University of Toronto, 1265 Military Trail, Toronto M1C 1A4 (Canada)

    2016-03-01

    Human exposure to halogenated flame retardants (HFRs) such as polybrominated diphenyl ethers (PBDEs) and their replacements, can be related to exposure to indoor dust and direct contact with HFR-containing products. This study aimed to identify electronic products that contributed to HFRs measured in indoor dust and to develop a screening method for identifying HFRs in hard polymer products. Concentrations of 10 PBDEs and 12 halogenated replacements in dust and surface wipe samples of hard polymer casings of electronic products plus Br in the surfaces of those casing measured using X-ray fluorescence (XRF) were analyzed from 35 homes and 10 offices in Toronto (ON, Canada). HFR concentrations in dust and product wipes were positively correlated. Thus, we hypothesize that electronic products with the highest HFR concentrations contribute the most to concentrations in dust, regardless of the volatility of the HFR. Abundant HFRs in dust and product wipes were PBDEs (BDE-47, 99, 100, 153, 154, 183, 209), TDCPP, DBDPE, EH-TBB and BEHTBP. Older CRT TVs had the highest concentration of BDE-209 of all products tested. This was followed by higher concentrations of HFRs in PCs, Audio/Video (A/V) devices, small household appliances (HHAs) and flat screen TVs. The removal of HFRs from polymer surfaces using wipes supports concerns that HFRs could be transferred from these surfaces to hands as a result of direct contact with HFR-containing products. Surface wipe testing shows promise for screening additive HFRs. In comparison, the Br-content obtained using a handheld XRF analyzer did not correspond to concentrations obtained from surface wipe testing. - Highlights: • Concentrations of flame retardants in dust correlated with product surface wipes • Most abundant FRs in electronics were PBDEs, TDCPP, DBDPE, EH-TBB and BEHTBP. • Descending order of FRs in CRTs, TVs, PCs, A-V devices, and small household appliances • Product wipe testing, but not XRF, useful for non

  10. Product screening for sources of halogenated flame retardants in Canadian house and office dust

    International Nuclear Information System (INIS)

    Abbasi, Golnoush; Saini, Amandeep; Goosey, Emma; Diamond, Miriam L.

    2016-01-01

    Human exposure to halogenated flame retardants (HFRs) such as polybrominated diphenyl ethers (PBDEs) and their replacements, can be related to exposure to indoor dust and direct contact with HFR-containing products. This study aimed to identify electronic products that contributed to HFRs measured in indoor dust and to develop a screening method for identifying HFRs in hard polymer products. Concentrations of 10 PBDEs and 12 halogenated replacements in dust and surface wipe samples of hard polymer casings of electronic products plus Br in the surfaces of those casing measured using X-ray fluorescence (XRF) were analyzed from 35 homes and 10 offices in Toronto (ON, Canada). HFR concentrations in dust and product wipes were positively correlated. Thus, we hypothesize that electronic products with the highest HFR concentrations contribute the most to concentrations in dust, regardless of the volatility of the HFR. Abundant HFRs in dust and product wipes were PBDEs (BDE-47, 99, 100, 153, 154, 183, 209), TDCPP, DBDPE, EH-TBB and BEHTBP. Older CRT TVs had the highest concentration of BDE-209 of all products tested. This was followed by higher concentrations of HFRs in PCs, Audio/Video (A/V) devices, small household appliances (HHAs) and flat screen TVs. The removal of HFRs from polymer surfaces using wipes supports concerns that HFRs could be transferred from these surfaces to hands as a result of direct contact with HFR-containing products. Surface wipe testing shows promise for screening additive HFRs. In comparison, the Br-content obtained using a handheld XRF analyzer did not correspond to concentrations obtained from surface wipe testing. - Highlights: • Concentrations of flame retardants in dust correlated with product surface wipes • Most abundant FRs in electronics were PBDEs, TDCPP, DBDPE, EH-TBB and BEHTBP. • Descending order of FRs in CRTs, TVs, PCs, A-V devices, and small household appliances • Product wipe testing, but not XRF, useful for non

  11. The Microsoft® Crabby Office Lady Tells It Like It Is Secrets to Surviving Office Life

    CERN Document Server

    Stahl, Annik

    2009-01-01

    We all have to work for a living-so why not make that time work for you? Whether you're in a cubicle or corner office, the Crabby Office Lady shows you how to be more productive on the job so that you can really enjoy your time off the job. Humorous but practical, the lovable know-it-all reveals her secrets in this easy-to-read survival guide based on her popular column. You'll get her no-nonsense lessons to succeeding at work, as well as tips and tricks for working with Microsoft Office programs to help simplify your life. She'll give you the straight scoop-so pay attention! Crabby says, "L

  12. 24 CFR 700.145 - Cost distribution.

    Science.gov (United States)

    2010-04-01

    ... to 10 percent of the 50 percent matching amount), such as the current market value of donated common or office space, utility costs, furniture, material, supplies, equipment and food used in direct...

  13. FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.

  14. Clusters or the Early Internationalisation of Entrepreneurial Behaviour as Explanations for the Exceptional Success of the Danish Furniture Industry?

    DEFF Research Database (Denmark)

    Howells, John; Hedemann, Lars

    This article contrasts two explanations of the economic success of the Danish furniture industry. The first is that success derives from learning processes within firm clusters and the second is a path dependent 'regional learning' theory, that early, post World War 2 overseas demand created...... for two principal reasons; today there has been a sharp decline in the economic significance of the firms in the West Jutland industrial districts while ten large internationalised firms scattered and not clustered within Denmark account for half of industry turnover. This suggests the primacy...

  15. The Small- and Medium-sized Enterprises Office (SME Office) at the European Medicines Agency.

    Science.gov (United States)

    Carr, M

    2010-01-01

    On 15 December 2005, the European Medicines Agency (EMEA) launched an "SME Office" to provide financial and administrative assistance to micro-, small- and medium-sized enterprises (SMEs), with the aim of promoting innovation and the development of new human and veterinary medicinal products by SMEs. According to current EU definition of an SME, companies with fewer than 250 employees, and an annual turnover of not more than 50 million euro or an annual balance sheet total of not more than 43 million euro, are eligible for assistance from the SME Office. Incentives available from the EMEA for SMEs, include: Administrative and procedural assistance from SME Office within the Agency; Fee reductions (90%) for scientific advice and inspections; Fee exemptions for certain administrative services (excluding parallel distribution); Deferral of the fee payable for an application for marketing authorisation or related inspection until after the grant of the marketing authorisation; Conditional fee exemption where scientific advice followed and marketing application is unsuccessful; Assistance with translations of the product information documents. At the end of May 2009, more than 380 companies from 21 countries across the European Economic Area (EEA) had SME status assigned by the EMEA. The large majority of companies are developing medicinal products for human use, 16 are veterinary companies, 15 companies are developing products for both human and veterinary use and 38 are regulatory consultants. Since the SME initiative started the Agency has processed more than 130 requests for scientific advice with fee reductions totalling of 6.9 million euro. Regulatory assistance has been provided to more than 170 companies and 12 companies have benefited from the SME translation service. Stakeholders have acknowledged the significant role the SME Office now plays as a service provider. In the period between January 2006 and June 2009, 34 applications for marketing authorization

  16. Návrh sedacího nábytku s úložnými prostory

    OpenAIRE

    Soldát, Petr

    2014-01-01

    In this bachelor work I will focus on design of storage spaces in sitting furniture from point of view a type, function and aesthetics. A part about sitting furniture will contain used materials in production including upholstery and function requirements on sitting furniture. Work will contain construction design of sofa with integrated storage spaces. Contruction design comming out from czech and foreign market research in sitting furniture sphere and my existing knowledge. Bachelor work al...

  17. 7 CFR 1944.260 - Cost distribution.

    Science.gov (United States)

    2010-01-01

    ... limited to 10 percent of the 50 percent matching amount), such as the current market value of donated common or office space, utility costs, furniture, material, supplies, equipment and food used in direct...

  18. An end users perspective on activity-based office concepts

    NARCIS (Netherlands)

    Appel - Meulenbroek, H.A.J.A.; Groenen, P.J.M.; Janssen, I.I.

    2011-01-01

    Purpose – The activity-based office concept of the modern office is set to increase productivity through the stimulation of interaction and communication while retaining employee satisfaction and reducing the accommodation costs. Although some research has gone into understanding the added value,

  19. 27 CFR 447.56 - Authority of Customs officers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Authority of Customs... IMPLEMENTS OF WAR Miscellaneous Provisions § 447.56 Authority of Customs officers. (a) Officers of the U.S. Customs Service are authorized to take appropriate action to assure compliance with this part and with 27...

  20. Weatherization and Intergovernmental Programs Office Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2018-02-01

    One of the Department of Energy’s (DOE) primary forums for helping state and local governments implement costeffective and productive energy systems for American homes, communities, businesses, and industries is the Weatherization and Intergovernmental Programs Office (WIP). WIP is part of DOE’s Office of Energy Efficiency and Renewable Energy’s “all of the above” national energy strategy to create greater energy affordability, security and resiliency.

  1. Improvement of a multi-stage model for the modeling of a functionalized nursing bed as support for the sensor-assisted function-alization of furniture in the hospital and care sector

    Directory of Open Access Journals (Sweden)

    Kitzig Andreas

    2017-09-01

    Full Text Available Development of preparation-free functionalized furniture based patient monitoring systems for use in the area of home- or stationary- care is often empirically driven. In particular, functionalization of furniture by means of different sensors is strongly affected by this development methodology. As a result, the systems are often not extensive-ly extendable or cannot be optimized because basic mechanisms are not comprehensible. In order to support development or optimization, a modelling approach is often useful. Thus, using a more comprehensive approach the required sensitivity of the sensors as well as their position in the system can be derived from a simulation model. In order to solve this problem, a multi-stage model was introduced at the BMT conference in 2014 by the authors, which allows the designer to model the entire system. The model has been extended and improved in the meantime and the achieved progress is presented in this work. The presented modelling approach can be divided into three main components. These are the person under supervision, the furniture (in our case a nursing bed and the sensors (force measuring cells which are modelled separately. In this work the main focus will be on improving the modelling of the human movement process and its implementation. Furthermore, the modelling of the sensor behavior in the nursing bed is described in detail with regard to their oscillation behavior and the influence on the model.

  2. EL PROYECTO ARKIT. LA VIVIENDA COMO KIT DE MUEBLES / Project Arkit. The home as a furniture kit

    Directory of Open Access Journals (Sweden)

    Francisco Javier Terrados Cepeda

    2012-05-01

    Full Text Available RESUMEN El artículo hace una revisión sintética sobre algunas de las bases conceptuales del llamado “proyecto Arkit” así como sobre sus resultados en forma de proyectos residenciales y construcciones reales. Una primera parte recorre ejemplos de vivienda moderna donde lo que entendemos como mueble, levemente agigantado de escala, ha definido y en algunos casos realmente construido casi con exclusividad el espacio doméstico. Son los “muebles que construyen casas”. En la segunda parte, el artículo reseña los seis proyectos de casas prefabricadas ligeras que se han concebido al amparo del concepto del “kit de muebles” como sistema de prefabricación abierta: las viviendas del CSCAE, el prototipo Campohermoso, el proyecto Arkit, la residencia de Tariquejo, el proyecto Solarkit y el proyecto Arkit 18, de los cuales han sido construidos y analizados el tercero y el quinto: Arkit y su variante con energía solar Solarkit. El proyecto Arkit es una aportación novedosa en el campo de la vivienda prefabricada ligera, adaptada a las condiciones ambientales del sur de Europa, que usa como elementos constitutivos piezas de escala intermedia que están a medio camino entre el tamaño y la versatilidad del mobiliario y la escala de la habitación convencional. El proyecto Arkit permite disposiciones a elección del usuario y, como muestran los ejemplos expuestos, adaptaciones a diferentes programas residenciales. SUMMARY The article makes a summary review of some of the conceptual bases of the “ArtKit project” and their results as housing projects and real buildings. The first part covers examples of modern homes where what we understand as furniture, now rather gigantic in scale, has defined, and in some cases almost exclusively built, the domestic space. This is the “furniture which builds houses”. In the second part, the article reviews the six light prefabricated housing projects that have been designed under the

  3. Office Skills: Measuring Typewriting Output.

    Science.gov (United States)

    Petersen, Lois E.; Kruk, Leonard B.

    1978-01-01

    The advent of word processing centers has provided typewriting teachers with an alternative measurement system that, instead of penalizing errors, grades students according to Usable Lines Produced (ULP). The ULP system is job-oriented and promotes realistic office standards in typewriting productivity. (MF)

  4. Avaliação de resíduos de painéis de madeira gerados por indústrias moveleiras para aproveitamento na confecção de pequenos objetos: estudo de caso Evaluation of residues of wood boards generated by furniture industries for their utilization in the production of small objects: study of case

    Directory of Open Access Journals (Sweden)

    Luciana Barbosa de Abreu

    2009-01-01

    Full Text Available A indústria moveleira produz uma quantidade de resíduos que, normalmente, é descartada no meio ambiente ou utilizada como combustível em caldeiras e similares, ou apenas queimada. Alternativas para utilização desses resíduos têm sido alvo de pesquisas, destacando-se a confecção de pequenos objetos, na forma de artesanato. Neste trabalho, objetivou-se avaliar os resíduos de indústrias do pólo moveleiro de Ubá/MG. No levantamento quantitativo, constatou-se que as empresas geraram resíduos dos mesmos tipos de painéis de madeira. Os resíduos mais comuns foram de aglomerado e MDF (Medium Density Fiber. Observou-se grande variabilidade das dimensões desses resíduos, principalmente em sua largura. Concluiu-se que alguns resíduos não apresentaram dimensões adequadas para a confecção de determinados objetos e que se torna necessária uma seleção prévia desses resíduos para direcioná-los a trabalhos mais minuciosos, de forma a viabilizar a sua utilização.The furniture industry generates an amount of residues, which, normally, is discarded in the environment or destined to steam production in boilers. The handmade production of small wood board objects is an outstanding alternative to take advantage of these residues. The general aim of this study was to evaluate residues in furniture industries located at the pole of Ubá/MG. Through the survey and the analysis of the data, one established that the industries generate residues from the same kind of wood board. The most common residues were of particleboard and MDF (Medium Density Fiber. One observed a great diversity of residue dimensions, mainly in width. One concluded that some residues did not present adequate dimensions for the manufacturing of some objects and that there is a necessity of previous residues selection, in order to destine them to more detailed works and make possible their use.

  5. Danish experience with the EDIP tool for environmental design of industrial products

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Alting, Leo

    1999-01-01

    Since its publication in, 1996, the Danish method and tools for the environmental design of industrial products (EDIP) have been used in companies in Denmark and abroad, and experience has been gained with a variety of product categories such as electronics, electromechanical products, furniture......, foodstuffs, packaging, textiles, building equipment, energy systems and railway systems. The experience shows that large environmental improvement potentials can be found in all product categories. As a broad average, 30-50% environmental improvement of products have been implemented over few years...... by companies working with the EDIP tools. The paper presents examples from pumps, refrigerator, high pressure cleaners audio/video products, book shelves and moulded cardboards. A questionnaire investigation of the experience with life cycle assessment (LCA) and ecodesign within the Danish pioneer companies...

  6. Early Transition and Use of VIIRS and GOES-R Products by NWS Forecast Offices

    Science.gov (United States)

    Fuell, Kevin K.; Smith, Mathew; Jedlovec, Gary

    2012-01-01

    The Visible Infrared Imaging Radiometer Suite (VIIRS) on the NPOESS Preparatory Project (NPP) satellite, part of the Joint Polar Satellite System (JPSS), and the ABI and GLM sensors scheduled for the GOES-R geostationary satellite will bring advanced observing capabilities to the operational weather community. The NASA Short-term Prediction Research and Transition (SPoRT) project at Marshall Space Flight Center has been facilitating the use of real-time experimental and research satellite data by NWS Weather Forecast Offices (WFOs) for a number of years to demonstrate the planned capabilities of future sensors to address particular forecast challenges through improve situational awareness and short-term weather forecasts. For the NOAA GOES-R Proving Ground (PG) activity, SPoRT is developing and disseminating selected GOES-R proxy products to collaborating WFOs and National Centers. SPoRT developed the a pseudo-Geostationary Lightning Mapper product and helped in the transition of the Algorithm Working Group (AWG) Convective Initiation (CI) proxy product for the Hazardous Weather Testbed (HWT) Spring Experiment,. Along with its partner WFOs, SPoRT is evaluating MODIS/GOES Hybrid products, which brings ABI-like data sets from existing NASA instrumentation in front of the forecaster for everyday use. The Hybrid uses near real-time MODIS imagery to demonstrate future ABI capabilities, while utilizing standard GOES imagery to provide the temporal frequency of geostationary imagery expected by operational forecasters. In addition, SPoRT is collaborating with the GOES-R hydrology AWG to transition a baseline proxy product for rainfall rate / quantitative precipitation estimate (QPE) to the OCONUS regions. For VIIRS, SPoRT is demonstrating multispectral observing capabilities and the utility of low-light channels not previously available on operational weather satellites to address a variety of weather forecast challenges. This presentation will discuss the results of

  7. Freeware Versus Commercial Office Productivity Software

    Science.gov (United States)

    2016-12-01

    THREAT (SWOT) ANALYSIS Comparing multiple categories in a product selection process helps aid the DOD in choosing the correct productivity suite...DOD (Taylor, 2016). Because SWOT identifies both internal and external forces, the DOD’s product selection process needs to consider both. Once...search on alternate third party apps for things like hotels and restaurants instead of going to Google’s website. Google does not get paid if the users

  8. An assessment of the downturn in the forest products sector in the northern region of the United States

    Science.gov (United States)

    C.W. Woodall; W.G. Luppold; P.J. Ince; R.J. Piva; K.E. Skog

    2012-01-01

    The forest industry within the northern region of the U.S. has declined notably in employment, mill numbers, wood consumption, and forest harvests since 2000…a downturn exacerbated by the recession of 2007 to 2009. Longer term industrial decline (since 2000) has been evidenced by reductions in secondary products (e.g., furniture) and print paper manufacturing which can...

  9. Access in a global rattan production network: a case study of rattan originating from Central Sulawesi, Indonesia and upgraded for sale in international markets

    OpenAIRE

    Myers, Rodd

    2015-01-01

    Forests and forest users are increasingly engaged in global scale markets that connect different stages of commodity production and retail. This thesis adopts a Global Production Network framing in order to investigate the case of rattan cane and furniture. I examine the ways in which actors benefit from rattan (a non-timber forest product) and elucidate power dynamics that explain how some actors are better positioned to benefit from rattan than others. My conceptual framework combines the l...

  10. Feasibility study on mental healthcare using indoor plants for office workers

    Science.gov (United States)

    Kubota, Tsuyoshi; Matsumoto, Hiroshi; Genjo, Kaori; Nakano, Takaoki

    2017-10-01

    In recent years, it has become a problem that office workers' stresses affect their intellectual productivity. As one of strategies mitigating the stress while working, many studies on the effect of indoor plants introduced into the office have been conducted. The psychological and physiological effects of indoor plants have been expected to mitigate the office workers' stresses. Also, the effects of green amenities such as improvement of productivity, control of the indoor thermal environment, relaxation and recovery of visual fatigue, and improvement of air quality have been expected. In this study, a field investigation on the green amenity effects of indoor plants on office workers' psychological and physiological responses in an actual office was conducted and discussed. This paper describes the measurement results of the physical environment and workers' psychological and physiological responses under the condition with shelves installed with indoor plants in an office room. It was suggested that indoor plants such as mint, basil and begonia, and a combination of red and green plants were effective for mitigating worker's stresses.

  11. 78 FR 11686 - Agency Information Collection Activities: Submission for the Office of Management and Budget (OMB...

    Science.gov (United States)

    2013-02-19

    ...: Submission for the Office of Management and Budget (OMB) Review; Comment Request AGENCY: Nuclear Regulatory... introduction of byproduct material into products or materials and transfer of the products or materials to..., Office of Information and Regulatory Affairs (3150-0001), NEOB-10202, Office of Management and Budget...

  12. THE OFFICE OF AEROSPACE RESEARCH SCIENTIFIC AND TECHNICAL INFORMATION PROGRAM

    Science.gov (United States)

    The document outlines the mission and organization of the Office of Aerospace Research (OAR), then describes how its principal product, scientific...effective technical information program, are documented by examples. The role of the Office of Scientific and Technical Information within OAR as performed

  13. 16 CFR 1000.21 - Office of Compliance and Field Operations.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Office of Compliance and Field Operations. 1000.21 Section 1000.21 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... addressed through rulemaking or voluntary standards. The Office develops surveillance strategies and...

  14. NASA Office of Small and Disadvantaged Business Utilization

    Science.gov (United States)

    2001-01-01

    The Office of Small and Disadvantaged Business Utilization (OSDBU) within NASA promotes the utilization of small, disadvantaged, and women-owned small businesses in compliance with Federal laws, regulations, and policies. We assist such firms in obtaining contracts and subcontracts with NASA and its prime contractors. The OSDBU also facilitates the participation of small businesses in NASA's technology transfer and commercialization activities. Our driving philosophy is to consider small businesses as our products. Our customers are the NASA Enterprises, Field Centers, Functional Staff Offices, major prime contractors, and other large institutions. We hone the skills of our products to make them marketable to our customers in the performance of NASA missions.

  15. Estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro = Evolutionary stages of IFAC managerial accounting that prevail in a furniture industrial pole

    Directory of Open Access Journals (Sweden)

    Edson Roberto Macohon

    2016-07-01

    Full Text Available O International Federations of Accountants (IFAC identificou quatro estágios evolutivos da contabilidade gerencial. Este estudo objetiva investigar os estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro. Para tal realizou-se pesquisa descritiva a partir de uma survey, tendo como população as 73 indústrias associadas ao Sindicato das Indústrias da Construção e do Mobiliário de São Bento do Sul, SC, Brasil, e uma amostra não-probabilística de 15 indústrias. Os resultados da pesquisa mostram que os artefatos da contabilidade gerencial com mais de 60% de indicações como projeto implantado são: simulações de rentabilidade dos produtos; custo dos produtos pelo custeio por absorção; acompanhamento da evolução dos indicadores não financeiros; índices econômico-financeiros como Return of Investment (ROI; Retorno sobre o Patrimônio Líquido (RSPL e índices de liquidez; redução do custo na fase de projeto de novo produto; planilhas de custos logísticos. Os artefatos que tiveram percentuais acima de 60% de indicações como projetos não implantados são: Custeio Baseado em Atividades (ABC; geração de relatórios por Business Inteligence (BI; Balanced Scorecard (BSC; Economic Value Added (EVA; preço de transferência e Just-in-time (JIT. The International Federations of Accountants (IFAC has identified four stages of progressive managerial accounting. This study aims at investigating the evolutionary stages of managerial accounting that prevail in a furniture industrial pole. For this, a descriptive research was carried out from a survey, having as population 73 industries associated with the Union of Industries and Construction of Furniture of São Bento do Sul, SC, Brazil, and a non-probability sample of 15 industries. The survey results have shown that the artifacts of managerial accounting that got more than 60% of indications, such as project implemented are: simulations of

  16. Make the most of Office 2010, Expression Web and Lync

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Special attention will be drawn to: changes of the user interface as compared with Office 2007 and Sharepoint 2007, new features that improve user-productivity. The aim of this presentation is to acquaint users with these versions of office software in the context of the migration to Windows 7.

  17. Ergonomija kompjutorskih sustava

    Directory of Open Access Journals (Sweden)

    Vitomir Grbavac

    2012-10-01

    Full Text Available The paper deals with the elements of ergonomics with reference to computer systems. The issue refers to the accommodation of working environment to the man i.e. the adjustment of conditions and equipment to the needs and requirements of workers. The analysis covers as follows: office furniture, equipment designing, lighting, noise level, temperature values, and humidity and office medical care information.

  18. Prioritizing Interdependent Production Processes using Leontief Input-Output Model

    Directory of Open Access Journals (Sweden)

    Masbad Jesah Grace

    2016-03-01

    Full Text Available This paper proposes a methodology in identifying key production processes in an interdependent production system. Previous approaches on this domain have drawbacks that may potentially affect the reliability of decision-making. The proposed approach adopts the Leontief input-output model (L-IOM which was proven successful in analyzing interdependent economic systems. The motivation behind such adoption lies in the strength of L-IOM in providing a rigorous quantitative framework in identifying key components of interdependent systems. In this proposed approach, the consumption and production flows of each process are represented respectively by the material inventory produced by the prior process and the material inventory produced by the current process, both in monetary values. A case study in a furniture production system located in central Philippines was carried out to elucidate the proposed approach. Results of the case were reported in this work

  19. 75 FR 32142 - Combustible Dust

    Science.gov (United States)

    2010-06-07

    .... Contact Mat Chibbaro, P.E., Fire Protection Engineer, Office of Safety Systems, OSHA Directorate of..., and metals (such as aluminum and magnesium). Industries that may have combustible dust hazards include..., chemical manufacturing, textile manufacturing, furniture manufacturing, metal processing, fabricated metal...

  20. Regulatory Office for Network Industries

    International Nuclear Information System (INIS)

    2005-01-01

    The main goal of the economic regulation of network industries is to ensure a balance between the interests of consumers and investors and to encourage providing high-quality goods and services. The task of the regulatory authority is to protect the interests of consumers against monopolistic behaviour of regulated enterprises. At the same time, the regulatory office has to protect the interests of investors by giving them an opportunity to achieve an adequate return on their investments. And last, but not least, the regulatory office has to provide regulated enterprises with appropriate incentives to make them function in an efficient and effective manner and to guarantee the security of delivery of energies and related services. All this creates an efficient regulatory framework that is capable of attracting the required amount and type of investments. This also means providing third party access to the grids, the opening of energy markets, the un-bundling of accounts according to production, distribution, transmission and other activities and the establishment of a transparent and stable legislative environment for regulated companies, investors and consumers. Otherwise, in the long run consumers may suffer from a serious deterioration of service quality, although in the short run they are protected against increased prices. Under the Act No. 276/2001 Coll. on Regulation of Network Industries and on amendment of some acts the Office for Regulation of Network Industries has been commissioned to implement the main objectives of regulation of network industries. By network industries the Act No. 276/2001 Coll. on Regulation means the following areas: (a) Production, purchase, transit and distribution of electricity; (b) Production, purchase, transit and distribution of gas; (c) Production, purchase and distribution of heat; (d) Water management activities relating to the operation of the public water supply system or the public sewerage system; (e) Water management