Production forecasting and economic evaluation of horizontal wells completed in natural fractured reservoirs

International Nuclear Information System (INIS)

Evans, R. D.

1996-01-01

A technique for optimizing recovery of hydrocarbons from naturally fractured reservoirs using horizontal well technology was proposed. The technique combines inflow performance analysis, production forecasting and economic considerations, and is based on material balance analysis and linear approximations of reservoir fluid properties as functions of reservoir pressure. An economic evaluation model accounting for the time value of cash flow, interest and inflation rates, is part of the package. Examples of using the technique have been demonstrated. The method is also applied to a gas well producing from a horizontal wellbore intersecting discrete natural fractures. 11 refs., 2 tabs,. 10 figs

Procedure for controlling the extraction of production fluid from a production well; Fremgangsmaate for aa styre uttrekking av produksjonsfluid fra en produksjonsbroenn

Energy Technology Data Exchange (ETDEWEB)

Curlett, H.B.

1996-06-17

Basic well drilling techniques have not changed throughout the years: a number of drill pipes connected into a drill column are rotated along with a drill bit in the ground formation. It has been difficult to obtain instant information on the local parameters during the drilling operation. Such information is required by the drilling operator for efficient operation. The present invention concerns controlling the extraction of production fluids from a production well, characterized by externally monitoring local well parameters by means of signals from sensors in the well. If the signals indicate that defined limiting values of one or more parameters have been exceeded, one or more of different fluids are pumped simultaneously and independently down individually assigned conduits to restore the parameters to within their normal ranges. 28 figs.

Phenological adaptations in Ficus tikoua exhibit convergence with unrelated extra-tropical fig trees.

Directory of Open Access Journals (Sweden)

Ting-Ting Zhao

Full Text Available Flowering phenology is central to the ecology and evolution of most flowering plants. In highly-specific nursery pollination systems, such as that involving fig trees (Ficus species and fig wasps (Agaonidae, any mismatch in timing has serious consequences because the plants must balance seed production with maintenance of their pollinator populations. Most fig trees are found in tropical or subtropical habitats, but the dioecious Chinese Ficus tikoua has a more northerly distribution. We monitored how its fruiting phenology has adapted in response to a highly seasonal environment. Male trees (where fig wasps reproduce had one to three crops annually, whereas many seed-producing female trees produced only one fig crop. The timing of release of Ceratosolen fig wasps from male figs in late May and June was synchronized with the presence of receptive figs on female trees, at a time when there were few receptive figs on male trees, thereby ensuring seed set while allowing remnant pollinator populations to persist. F. tikoua phenology has converged with those of other (unrelated northern Ficus species, but there are differences. Unlike F. carica in Europe, all F. tikoua male figs contain male flowers, and unlike F. pumila in China, but like F. carica, it is the second annual generation of adult wasps that pollinate female figs. The phenologies of all three temperate fig trees generate annual bottlenecks in the size of pollinator populations and for female F. tikoua also a shortage of fig wasps that results in many figs failing to be pollinated.

Harding - a field case study: Sand control strategy for ultra-high productivity and injectivity wells

Energy Technology Data Exchange (ETDEWEB)

McKay, G.; Bennett, C.; Price-Smith, C.; Dowell, S.; McLellan, W. [British Petroleum (United Kingdom)

1998-12-31

The strategy adopted and the factors considered in the development of the sandface completion design for Phase One of the Harding Field in the unconsolidated Balder Massive Sand in the U.K. Sector of the North Sea is described. The field development utilizes a TPG 500 Jack-up Drilling and Production Unit in conjunction with a concrete gravity base tank (GBT). The first phase of the development involved drilling and completing horizontal wells sand-free, ultra-high production (over 30,000 BOPD/well, with PI in excess of 1,000 bbl/day/psi). The experiences showed that pre-packed screens can be successfully utilized to provide lasting sand control with high rate of production in clean homogenous sandstones, and that testing for fluid compatibility, formation damage, screen plugging, corrosion and erosion potential are essential pre-requisites in determining the optimal solution in any well with sand production potential.The experiences gained in Phase One have contributed to design enhancements for Phase Two of the project which include extended reach horizontal wells to neighbouring satellite pools. 3 refs., 1 tab., 8 figs.

Distribution of Fig Mosaic in Jordan

Directory of Open Access Journals (Sweden)

Khalil I. Al-Mughrabi

2000-08-01

Full Text Available Fig mosaic (FM is one of the most important diseases of figs in Jordan. A nationwide survey was conducted to determine the incidence and severity of this disease in trees and in seedlings propagated by cuttings in orchards and nurseries in 13 provinces and cities all over the country. Cultivars surveyed included Khdari, Mwazi, Zraki, Khartamani, Dafoori, Turki, Hamari, Esaili, Ajlouni, in addition to an Italian and a French cultivar. Disease severity varied from moderately severe to extremely severe with leaf malformation and fruit drop FM was found in all provinces. Incidence of FM, averaged over trees of all cultivars and all age categories, was 95.3%. Fig trees 3 years and older had the highest disease incidence, ranging from 93.3% to 100% in the different orchards. The Esaili cultivar had the lowest incidence ranging between 50% and100%, with an average of 76.5%. The highest FM incidence was on Dafoori. Of the most common cultivars, Khdari was the most susceptible. Jerash province had the highest percentage (12.5% of fig seedlings and trees in the most severe disease category. The highest percentage (27.8% of healthy fig seedlings and trees was in Irbid province. This paper reports the incidence of FM in various local and imported fig cultivars of different ages, and relates the spread of the disease to the method of fig propagation practiced in Jordan. Suggested solutions for the problem, which include the introduction of disease and pest free fig seedlings derived from tissue culture and the establishment of new rules and regulations to prevent the spread of the disease are discussed.

Sexual specialization in two tropical dioecious figs.

Science.gov (United States)

Patel, Aviva; McKey, Doyle

1998-07-01

Ficus species (figs) and their species-specific pollinator wasps are involved in an intimate mutualism in which wasps lay eggs in some ovaries of the closed inflorescences (syconia), and mature, inseminated offspring carry pollen from mature syconia to fertilize receptive inflorescences. In monoecious species, each syconium produces seeds and wasps. In functionally dioecious fig species, making up approximately half the figs worldwide, male and female functions are separated; hermaphrodite (functionally male) trees produce wasps and pollen only, while female trees produce seeds only. This sexual separation allows selection to act independently on the reproductive biology of each sex. Examining sexual specialization in a tight mutualism allows us to determine aspects of the mutualism that are flexible and those that are canalized. In this study, we quantified the phenology of two species of dioecious figs, F. exasperata and F. hispida, for 2 years by following the fates of several thousand syconia over time. In studying each of these species in a dry and a wet site in south India, we tested specific predictions of how dioecious figs might optimize sexual function. On female trees of both species, more inflorescences matured during the wet (monsoon) season than in any other season; this fruiting period enabled seeds to be produced during the season most suitable for germination. In F. exasperata, functionally male trees released most wasps from mature syconia in the dry season, during peak production of receptive female syconia, and thus maximized successful pollination. In F. hispida, "male" trees produced more syconia in the dry and monsoon seasons than in the post-monsoon season. In both species, male and female trees abscised more unpollinated, young inflorescences than pollinated inflorescences, but abscission appeared to be more likely due to resource- rather than pollinator- limitation. The phenology of F. exasperata requires that male inflorescences wait in

Putting your sons in the right place: the spatial distribution of fig wasp offspring inside figs

NARCIS (Netherlands)

Zavodna, M.; Compton, S.G.; Biere, A.; Gilmartin, P.M.; Van Damme, J.M.M.

2005-01-01

1. Pollinating fig wasps (Hymenoptera, Agaonidae) display sex ratio adjustment, producing less female-biased combined sex ratios as the number of ovipositing females (foundresses) inside a fig increases. Because males have low mobility, the oviposition sites (galled ovules) chosen by each foundress

Moving your sons to safety: galls containing male fig wasps expand into the centre of figs, away from enemies.

Directory of Open Access Journals (Sweden)

Hui Yu

Full Text Available Figs are the inflorescences of fig trees (Ficus spp., Moraceae. They are shaped like a hollow ball, lined on their inner surface by numerous tiny female flowers. Pollination is carried out by host-specific fig wasps (Agaonidae. Female pollinators enter the figs through a narrow entrance gate and once inside can walk around on a platform generated by the stigmas of the flowers. They lay their eggs into the ovules, via the stigmas and styles, and also gall the flowers, causing the ovules to expand and their pedicels to elongate. A single pollinator larva develops in each galled ovule. Numerous species of non-pollinating fig wasps (NPFW, belonging to other families of Chalcidoidea also make use of galled ovules in the figs. Some initiate galls, others make use of pollinator-generated galls, killing pollinator larvae. Most NPFW oviposit from the outside of figs, making peripherally-located pollinator larvae more prone to attack. Style length variation is high among monoecious Ficus spp. and pollinators mainly oviposit into more centrally-located ovules, with shorter styles. Style length variation is lower in male (wasp-producing figs of dioecious Ficus spp., making ovules equally vulnerable to attack by NPFW at the time that pollinators oviposit. We recorded the spatial distributions of galled ovules in mature male figs of the dioecious Ficus hirta in Southern China. The galls contained pollinators and three NPFW that kill them. Pollinators were concentrated in galls located towards the centre of the figs, NPFW towards the periphery. Due to greater pedicel elongation by male galls, male pollinators became located in more central galls than their females, and so were less likely to be attacked. This helps ensure that sufficient males survive, despite strongly female-biased sex ratios, and may be a consequence of the pollinator females laying mostly male eggs at the start of oviposition sequences.

Partial avoidance of female inflorescences of a dioecious fig by their mutualistic pollinating wasps

Science.gov (United States)

Anstett, M. C.; Gibernau, M.; Hossaert-McKey, M.

1998-01-01

Every dioecious species of fig is pollinated by a specific wasp that only reproduces within the inflorescences of male trees. Pollinators usually die within the closed urn-shaped inflorescence (fig or syconium) they visit. Thus pollinators that enter female syconia allow seed production but die without reproducing. In a previous study, pollinators of one dioecious fig where male and female trees flower synchronously, Ficus hispida, did not exhibit differential attraction or choice between inflorescences of the two sexes. Here we show that Blastophaga psenes, the pollinator of another dioecious species of different lineage, the common fig (F. carica), significantly avoided female syconia, when we experimentally induce a situation of choice. Paradoxically, choosiness can be demonstrated in F. carica where usually wasps do not face a choice because male and female trees do not flower synchronously. We discuss how the mutualism may be stable despite this discrimination and hypothesize why the two species of fig-pollinators exhibit different behaviour on dioecious figs.

Tracking the elusive history of diversification in plant-herbivorous insect-parasitoid food webs: insights from figs and fig wasps.

Science.gov (United States)

Kjellberg, Finn; Proffit, Magali

2016-02-01

The food webs consisting of plants, herbivorous insects and their insect parasitoids are a major component of terrestrial biodiversity. They play a central role in the functioning of all terrestrial ecosystems, and the number of species involved is mind-blowing (Nyman et al. 2015). Nevertheless, our understanding of the evolutionary and ecological determinants of their diversity is still in its infancy. In this issue of Molecular Ecology, Sutton et al. (2016) open a window into the comparative analysis of spatial genetic structuring in a set of comparable multitrophic models, involving highly species-specific interactions: figs and fig wasps. This is the first study to compare genetic structure using population genetics tools in a fig-pollinating wasp (Pleistodontes imperialis sp1) and its main parasitoid (Sycoscapter sp.A). The fig-pollinating wasp has a discontinuous spatial distribution that correlates with genetic differentiation, while the parasitoid bridges the discontinuity by parasitizing other pollinator species on the same host fig tree and presents basically no spatial genetic structure. The full implications of these results for our general understanding of plant-herbivorous insect-insect parasitoids diversification become apparent when envisioned within the framework of recent advances in fig and fig wasp biology. © 2016 John Wiley & Sons Ltd.

Fig volatile compounds--a first comparative study.

Science.gov (United States)

Grison-Pigé, Laure; Hossaert-McKey, Martine; Greeff, Jaco M; Bessière, Jean-Marie

2002-09-01

We analysed the compounds of volatile blends released by receptive figs of twenty Ficus species to attract their specific pollinating wasps. In all, 99 different compounds were identified. The compounds are mainly terpenoids, aliphatic compounds and products from the shikimic acid pathway. In each species blend, there are few major compounds, which are generally common among floral fragrances. Most species blends also include rare compounds, but generally their proportion in the blend is low. A possible basis for species-specificity of Ficus-wasp interactions is discussed in relation to the patterns of volatiles found in this interspecies comparison. Copyright 2002 Elsevier Science Ltd.

Heavy crude production from shallow formations: long horizontal wells versus horizontal fractures

Energy Technology Data Exchange (ETDEWEB)

Valko, P.; Economides, M. J. [Texas A and M Univ., TX (United States)

1998-12-31

The feasibility of producing heavy oil from shallow formations using either horizontal wells or short horizontal wells fractured horizontally is demonstrated. The problem of optimum proppant placement is solved in two steps. In step one, the finite productivity performance is considered in general terms showing that the performance is a function of two dimensionless parameters. Following derivation of optimum conditions, the solution is applied to the horizontal fracture consideration. The limiting factor is that to create an effective finite conductivity fracture, the dimensionless fracture conductivity must be on the order of unity, a fracture that is difficult to realize in higher permeability formations. The best candidates for the suggested configuration are shallow or moderate formations, or formations otherwise proven to accept horizontal fractures, and formations with low permeability/viscosity ratio. 7 refs., 2 tabs., 10 figs., 2 appendices.

Improved waterflooding efficiency by horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Popa, C. G. [Petroleum and Gas Univ., Ploesti (Romania); Clipea, M. [SNP Petrom SA, ICPT Campina (Romania)

1998-12-31

The influence of well pattern involving the use of horizontal wells on the overall efficiency of the waterflooding process was analyzed. Three different scenarios were examined: (1) a pattern of using two parallel horizontal wells, one for injection, the other for production, (2) a pattern of one horizontal well for water injection and several vertical wells for production, and (3) a pattern of using vertical wells for injection and one horizontal well for production. In each case, the waterflooding process was simulated using a two phase two dimensional numerical model. Results showed that the pressure loss along the horizontal section had a large influence on the sweep efficiency whether the horizontal well was used for injection or production. Overall, the most successful combination appeared to be using vertical wells for injection and horizontal wells for production. 4 refs., 1 tab., 15 figs.

A gas production system from methane hydrate layers by hot water injection and BHP control with radial horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Yamakawa, T.; Ono, S.; Iwamoto, A.; Sugai, Y.; Sasaki, K. [Kyushu Univ., Fukuoka, Fukuoka (Japan)

2010-07-01

Reservoir characterization of methane hydrate (MH) bearing turbidite channel in the eastern Nankai Trough, in Japan has been performed to develop a gas production strategy. This paper proposed a gas production system from methane hydrate (MH) sediment layers by combining the hot water injection method and bottom hole pressure control at the production well using radial horizontal wells. Numerical simulations of the cylindrical homogeneous MH layer model were performed in order to evaluate gas production characteristics by the depressurization method with bottom hole pressure control. In addition, the effects of numerical block modeling and averaging physical properties of MH layers were presented. According to numerical simulations, combining the existing production system with hot water injection and bottom hole pressure control results in an outward expansion of the hot water chamber from the center of the MH layer with continuous gas production. 10 refs., 15 figs.

Correlation between potential well structure and neutron production in inertial electrostatic confinement fusion

International Nuclear Information System (INIS)

Ohnishi, M.; Yamamoto, Y.; Yoshikawa, K.; Sato, K.H.

1997-01-01

The electrostatic potential well in inertial electrostatic confinement (IEC) is studied using two approaches. First, the equilibrium potential profile is obtained by solving the charge neutrality condition, i.e. n i n e , assuming the appropriate distribution functions for the ions and the electrons. The formation of a double well structure is demonstrated, with a depth depending upon the ratio between the focus radii of the electrons and the ions. The correlations between the well depth and the volume integrated neutron production due to deuterium-deuterium (DD) reactions are obtained. Second, in order to study the stability of the well, the dynamic behaviours of the potential well are calculated by performing time advancing numerical simulations on the basis of the particle in cell method. Single, double and triple wells, depending on the amount of injected ion current, are observed to be formed for ions with a monoenergetic distribution. The well in the centre of the multiwell structure is unstable and oscillates with a periods much longer than the inverse ion plasma frequency. A double well structure can be formed even for ions with a spread out energy distribution when the ion current is larger than the threshold value. The time averaged neutron production by DD fusion events is proportional to a power of the ion current involved in forming the double well structure. The results strongly suggest that the high neutron production rate should be attributed to not only the well depth but also the unstable behaviour of the potential, i.e. the intermittent peaking of the density in the centre region. A numerical simulation reveals that IEC possesses a favourable dependence of fusion reactions on the injected ion current for the application to a neutron source or a fusion reactor. (author). 9 refs, 9 figs

YIELD OF COMMON FIG FERTIGATED WITH BOVINE BIOFERTILIZER IN THE SEMIARID REGION OF CEARÁ

Directory of Open Access Journals (Sweden)

FRANCISCO LIMEIRA DA SILVA

2016-01-01

Full Text Available The objective was to evaluate the productivity of the fig tree the organic fertirrigation cattle under different environmental conditions in Ceará semiarid region. The experiment was conducted in the experimental area of the Teaching Unit, Research and Extension, the IFCE, North Lemon Tree, EC. The experimental design was a randomized complete block design with split plots, with four replications and three plants per plot. The plots consisted of three rooms (full sun - PS; trellis - LT and greenhouse - EST, the subplots, the concentrations of bovine biofertilizer diluted in water in the following concentrations: T0 (0% of biofertilizer + 100% water; T1 (20% biofertilizer 80 +% water; T2 (40% biofertilizer + 60% water, T3 (60% biofertiliante + 40% water and subsubplot, the production cycles. The variables were evaluated: average fruit weight, fruit diameter, number of fruits per plant and yield. The cultivation environments (greenhouse and trellis promote better performance on average mass and diameter of the fruit compared to plants grown in full sun during the production cycles of the fig crop grown in Ceará semiarid region. The bovine biofertilizer in the concentration of 60% promoted the highest mass, diameter, number of fruits per plant and the fig crop yield.

Interpretation of horizontal well production logs: influence of logging tool

Energy Technology Data Exchange (ETDEWEB)

Ozkan, E. [Colorado School of Mines, Boulder, CO (United States); Sarica, C. [Pennsylvania State Univ., College Park, PA (United States); Haci, M. [Drilling Measurements, Inc (United States)

1998-12-31

The influence of a production-logging tool on wellbore flow rate and pressure measurements was investigated, focusing on the disturbence caused by the production-logging tool and the coiled tubing on the original flow conditions in the wellbore. The investigation was carried out using an analytical model and single-phase liquid flow was assumed. Results showed that the production-logging tool influenced the measurements as shown by the deviation of the original flow-rate, pressure profiles and low-conductivity wellbores. High production rates increase the effect of the production-logging tool. Recovering or inferring the original flow conditions in the wellbore from the production-logging data is a very complex process which cannot be solved easily. For this reason, the conditions under which the information obtained by production-logging is meaningful is of considerable practical interest. 7 refs., 2 tabs., 15 figs.

Distribution of Fig Mosaic in Jordan

OpenAIRE

Khalil I. Al-Mughrabi; Ghandi H. Anfoka

2000-01-01

Fig mosaic (FM) is one of the most important diseases of figs in Jordan. A nationwide survey was conducted to determine the incidence and severity of this disease in trees and in seedlings propagated by cuttings in orchards and nurseries in 13 provinces and cities all over the country. Cultivars surveyed included Khdari, Mwazi, Zraki, Khartamani, Dafoori, Turki, Hamari, Esaili, Ajlouni, in addition to an Italian and a French cultivar. Disease severity varied from moderately severe...

Understanding gas production mechanism and effectiveness of well stimulation in the Haynesville shale through reservoir simulation

Energy Technology Data Exchange (ETDEWEB)

Fan, L.; Thompson, J.W.; Robinson, J.R. [Schlumberger, Houston, TX (United States)

2010-07-01

The Haynesville Shale Basin is one of the large and most active shale gas plays in the United States, with 185 horizontal rigs currently in place. The Haynesville Shale is a very tight source rock and resource play. The gas resources are being converted into gas reserves with horizontal wells and hydraulic fracture treatments. A complex fracture network created during well stimulation is the main factor in generating superior early well performance in the area. The key to making better wells in all the gas shale plays is to understand how to create more surface area during hydraulic stimulation jobs and preserve the surface area for as long as possible. This paper presented a unique workflow and methodology that has enabled analysis of production data using reservoir simulation to explain the shale gas production mechanism and the effectiveness of stimulation treatments along laterals. Since 2008, this methodology has been used to analyze production data from more than 30 horizontal wells in the Haynesville Shale. Factors and parameters relating to short and long term well performance were investigated, including pore pressure, rock matrix quality, natural fractures, hydraulic fractures, and complex fracture networks. Operators can use the simulation results to determine where and how to spend resources to produce better wells and to reduce the uncertainties of developing these properties. 19 refs., 1 tab., 17 figs.

Acclimatization and leaf anatomy of micropropagated fig plantlets

Directory of Open Access Journals (Sweden)

Chrystiane Fráguas Chirinéa

2012-12-01

Full Text Available The survival of micropropagated plants during and after acclimatization is a limiting process to plant establishment. There is little information on how the anatomy of vegetative organs of Ficus carica can be affected by culture conditions and acclimatization. The present research aimed to study the effects of time on culture medium and substrates during the acclimatization of fig tree plantlets produced in vitro, characterizing some leaf anatomy aspects of plantlets cultured in vitro and of fig trees produced in field. Plantlets previously multiplied in vitro were separated and transferred into Wood Plant Medium (WPM where they were kept for 0, 15, 30, 45 and 60 days. Different substrates were tested and studies on leaf anatomy were performed in order to compare among plantlets grown in vitro, plantlets under 20, 40 and 60 days of acclimatization, and field grown plants. Keeping plantlets for 30 days in WPM allowed better development in Plantmax during acclimatization. Field grown plants presented higher number of stomata, greater epicuticular wax thickness and greater leaf tissue production compared to in vitro ones. The leaf tissues of in vitro plantlets show little differentiation and have great stomata number compared with acclimatized plants, which reduce the number of stomata during the acclimatization process.

Specific attraction of fig-pollinating wasps: role of volatile compounds released by tropical figs.

Science.gov (United States)

Grison-Pigé, Laure; Bessière, Jean-Marie; Hossaert-McKey, Martine

2002-02-01

Floral scents often act as pollinator attractants. In the case of obligate and specific plant-pollinator relationships, the role of floral signals may be crucial in allowing the encounter of the partners. About 750 Ficus species (Moraceae) are involved in such interactions, each with a distinct species of pollinating wasp (Chalcidoidea, Agaonidae). Several species have been shown to release volatile compounds, but their role in pollinator attraction has rarely been simultaneously tested. We investigated the floral scents of four tropical fig species and combined chemical analysis with biological tests of stimulation of insects. Pollinators of three species were stimulated by the odor of their associated fig species and generally not by the odor of another species. The fourth actually comprised two distinct varieties. The main compound was often a different one in each species. Floral blends of different species always shared compounds, but ratios of these compounds varied among species.

Premature attraction of pollinators to inaccessible figs of Ficus altissima: a search for ecological and evolutionary consequences.

Directory of Open Access Journals (Sweden)

Yuan Zhang

Full Text Available Adult life spans of only one or two days characterise life cycles of the fig wasps (Agaonidae that pollinate fig trees (Ficus spp., Moraceae. Selection is expected to favour traits that maximise the value of the timing of encounters between such mutualistic partners, and fig wasps are usually only attracted to their hosts by species- and developmental-stage specific volatiles released from figs at the time when they are ready to be entered, oviposited in and pollinated. We found that Ficus altissima is exceptional, because it has persistent tight-fitting bud covers that prevent its Eupristina altissima pollinator (and a second species of 'cheater' agaonid from entering its figs for several days after they start to be attracted. We examined the consequences of delayed entry for the figs and fig wasps and tested whether delayed entry has been selected to increase adult longevity. We found that older pollinators produced fewer and smaller offspring, but seed production was more efficient. Pollinator offspring ratios also varied depending on the age of figs they entered. The two agaonids from F. altissima lived slightly longer than six congeners associated with typical figs, but this was explainable by their larger body sizes. Delayed entry generates reproductive costs, especially for the pollinator. This opens an interesting perspective on the coevolution of figs and their pollinators and on the nature of mutualistic interactions in general.

FIG4 regulates lysosome membrane homeostasis independent of phosphatase function.

Science.gov (United States)

Bharadwaj, Rajnish; Cunningham, Kathleen M; Zhang, Ke; Lloyd, Thomas E

2016-02-15

FIG4 is a phosphoinositide phosphatase that is mutated in several diseases including Charcot-Marie-Tooth Disease 4J (CMT4J) and Yunis-Varon syndrome (YVS). To investigate the mechanism of disease pathogenesis, we generated Drosophila models of FIG4-related diseases. Fig4 null mutant animals are viable but exhibit marked enlargement of the lysosomal compartment in muscle cells and neurons, accompanied by an age-related decline in flight ability. Transgenic animals expressing Drosophila Fig4 missense mutations corresponding to human pathogenic mutations can partially rescue lysosomal expansion phenotypes, consistent with these mutations causing decreased FIG4 function. Interestingly, Fig4 mutations predicted to inactivate FIG4 phosphatase activity rescue lysosome expansion phenotypes, and mutations in the phosphoinositide (3) phosphate kinase Fab1 that performs the reverse enzymatic reaction also causes a lysosome expansion phenotype. Since FIG4 and FAB1 are present together in the same biochemical complex, these data are consistent with a model in which FIG4 serves a phosphatase-independent biosynthetic function that is essential for lysosomal membrane homeostasis. Lysosomal phenotypes are suppressed by genetic inhibition of Rab7 or the HOPS complex, demonstrating that FIG4 functions after endosome-to-lysosome fusion. Furthermore, disruption of the retromer complex, implicated in recycling from the lysosome to Golgi, does not lead to similar phenotypes as Fig4, suggesting that the lysosomal defects are not due to compromised retromer-mediated recycling of endolysosomal membranes. These data show that FIG4 plays a critical noncatalytic function in maintaining lysosomal membrane homeostasis, and that this function is disrupted by mutations that cause CMT4J and YVS. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Codivergence and multiple host species use by fig wasp populations of the Ficus pollination mutualism

Directory of Open Access Journals (Sweden)

McLeish Michael J

2012-01-01

Full Text Available Abstract Background The interaction between insects and plants takes myriad forms in the generation of spectacular diversity. In this association a species host range is fundamental and often measured using an estimate of phylogenetic concordance between species. Pollinating fig wasps display extreme host species specificity, but the intraspecific variation in empirical accounts of host affiliation has previously been underestimated. In this investigation, lineage delimitation and codiversification tests are used to generate and discuss hypotheses elucidating on pollinating fig wasp associations with Ficus. Results Statistical parsimony and AMOVA revealed deep divergences at the COI locus within several pollinating fig wasp species that persist on the same host Ficus species. Changes in branching patterns estimated using the generalized mixed Yule coalescent test indicated lineage duplication on the same Ficus species. Conversely, Elisabethiella and Alfonsiella fig wasp species are able to reproduce on multiple, but closely related host fig species. Tree reconciliation tests indicate significant codiversification as well as significant incongruence between fig wasp and Ficus phylogenies. Conclusions The findings demonstrate more relaxed pollinating fig wasp host specificity than previously appreciated. Evolutionarily conservative host associations have been tempered by horizontal transfer and lineage duplication among closely related Ficus species. Independent and asynchronistic diversification of pollinating fig wasps is best explained by a combination of both sympatric and allopatric models of speciation. Pollinator host preference constraints permit reproduction on closely related Ficus species, but uncertainty of the frequency and duration of these associations requires better resolution.

Ficus religiosa L. (English: Peepal tree or sacred fig; Hindi: Pippal ...

Indian Academy of Sciences (India)

Ficus religiosa L. (English: Peepal tree or sacred fig; Hindi: Pippal) of Moraceae is a large deciduous tree that grows wild as well as cultivated. The picture shows the tree with fresh flush of leaves. The tree is planted chiefly near the temples by Hindus and Buddhists who regard it as sacred. The characteristic heart-shaped ...

Pectin Methyl Esterase Activity Change in Intermediate Moisture Sun-Dried Figs after Storage

Directory of Open Access Journals (Sweden)

Dilek Demirbüker Kavak

2015-12-01

Full Text Available Intermediate moisture fruits can be obtained by rehydrating dried fruits. Intermediate moisture fruits are suitable for direct consumption compared to dry fruits and can be directly used in the production of various products such as bakery products, dairy products and candies. Aim of this study is to compare the pectin methyl esterase (PME activity of intermediate moisture figs which causes softening of the texture and to compare their microbial stability after 3 months storage period. For this purpose, dried figs were rehydrated in 30 and 80° C water until they reach 30% moisture content. Rehydrated samples were stored for 3 months at +4°C. Results showed that there was no statistically significant difference between the control samples and the samples rehydrated at 80°C according to the total viable counts. At the end of the storage period, results of residual PME activity in control samples was 24.1 μmol COOH min-1g-1, while it was found 17.4 μmol COOH min-1g-1 in samples rehydrated at 80°C. As a result rehydration conducted at 80°C provided 28% reduction in PME activity compared to the control samples rehydrated at 30°C, although it did not affect the microbial load significantly after storage.

FIG4 regulates lysosome membrane homeostasis independent of phosphatase function

OpenAIRE

Bharadwaj, Rajnish; Cunningham, Kathleen M.; Zhang, Ke; Lloyd, Thomas E.

2015-01-01

FIG4 is a phosphoinositide phosphatase that is mutated in several diseases including Charcot-Marie-Tooth Disease 4J (CMT4J) and Yunis-Varon syndrome (YVS). To investigate the mechanism of disease pathogenesis, we generated Drosophila models of FIG4-related diseases. Fig4 null mutant animals are viable but exhibit marked enlargement of the lysosomal compartment in muscle cells and neurons, accompanied by an age-related decline in flight ability. Transgenic animals expressing Drosophila Fig4 mi...

Selectively placing many fractures in openhole horizontal wells improves production

Energy Technology Data Exchange (ETDEWEB)

Love, T. G.; McCarty, R. A. [Chevron USA Inc (United States); Suraatmadja, J. B.; Chambers, R. W.; Grundmann, S. R.

1998-12-31

Result of a simulation of an openhole horizontal well that was treated with hydrajet fracturing, a new fracturing process wherein fractures are placed at different locations in a horizontal well without using sectional isolation techniques, are discussed. The process uses high-pressure jetting to concentrate fracturing energy at a precise fracture location, and data is obtained by means of surface and downhole pressure recorders, flow recorders, and tracers. This technique was used in a substantially depleted horizontal well in New Mexico with good results. The new process is reported to be expensive to implement which prevents widespread application at the present time. 7 refs., 9 figs.

Radiation processing as a post-harvest quarantine control for raisins, dried figs and dried apricots

International Nuclear Information System (INIS)

Cetinkaya, N.; Ozyardimci, B.; Denli, E.; Ic, E.

2006-01-01

The commercially packed samples of raisins, dried figs and dried apricots were irradiated using doses in the range of 0.5-1.0 kGy for disinfestation and 0.5-5.0 kGy for sensory analysis with the dose rate ranging from 1.44 to 1.92 kGy/h. Pests on dried fruits were evaluated after 0, 1, 2 and 3 months of storage for irradiated dried figs and 1, 3, 6 and 12 months of storage for raisins and dried apricots. Sensory analysis of dried figs, dried apricots and raisins were carried out after 0, 1, 3, 6 and 12 months of storage. The results indicated that radiation processing at low doses (∼1.0 kGy) is an effective post-harvest treatment and quarantine control for these products with no adverse effects on sensory (marketing) attributes

Radiation processing as a post-harvest quarantine control for raisins, dried figs and dried apricots

Energy Technology Data Exchange (ETDEWEB)

Cetinkaya, N. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey)]. E-mail: nurcet@taek.gov.tr; Ozyardimci, B. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey); Denli, E. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey); Ic, E. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey)

2006-03-15

The commercially packed samples of raisins, dried figs and dried apricots were irradiated using doses in the range of 0.5-1.0 kGy for disinfestation and 0.5-5.0 kGy for sensory analysis with the dose rate ranging from 1.44 to 1.92 kGy/h. Pests on dried fruits were evaluated after 0, 1, 2 and 3 months of storage for irradiated dried figs and 1, 3, 6 and 12 months of storage for raisins and dried apricots. Sensory analysis of dried figs, dried apricots and raisins were carried out after 0, 1, 3, 6 and 12 months of storage. The results indicated that radiation processing at low doses ({approx}1.0 kGy) is an effective post-harvest treatment and quarantine control for these products with no adverse effects on sensory (marketing) attributes.

Improving recovery efficiency of water-drive channel sandstone reservoir by drilling wells laterally

Energy Technology Data Exchange (ETDEWEB)

Zhiguo, F.; Quinglong, D.; Pingshi, Z.; Bingyu, J.; Weigang, L. [Research Institute of Exploration and Development, Daqing (China)

1998-12-31

Example of drilling a horizontal well in reservoir rock of only four meter thick by using existing casing pipe of low efficiency vertical wells to induce production in the top remaining reservoir is described. The experience shows that drilling horizontal wells laterally in thin bodies of sandstone reservoirs and improve their productivity is a feasible proposition. Productivity will still be low, but it can be improved by well stimulation. 3 refs., 3 figs.

Theoretical modeling for optimizing horizontal production well placement in thermal recovery environments to maximize recovery

Energy Technology Data Exchange (ETDEWEB)

Bourgeois, D.J. [Schlumberger Canada Ltd., Calgary, AB (Canada)

2008-07-01

Heavy oil has a high viscosity and a low API gravity rating. Since it is difficult to get a fluid of this nature to flow, enhanced oil recovery techniques are required to extract the oil from the reservoir. Thermal recovery strategies such as steam assisted gravity drainage (SAGD) and cyclic steam injection stimulation (CSS) can be used. These techniques involve injecting steam into a formation which heats up the fluid in place decreasing its viscosity and allowing it to flow into the producing well bore. In order to maximize hydrocarbon recovery from this type of geological environment, the placement of the horizontal production well bore relative to the base of the reservoir is important. In conventional oil and gas plays, well placement methods involving directional deep resistivity logging while drilling (DDR-LWD) measurements to map formation contacts while drilling have enabled wells to be placed relative to formation boundaries. This paper discussed a study that presented some theoretical resistivity inversion and forward modeling results generated from a three-dimensional geocellular model to confirm that this evolving DDR-LWD technology may be applicable to western Canada's Athabasca heavy oil drilling environments. The paper discussed the effect of well bore position, thermal recovery, and pro-active well placement. Resistivity modeling work flow was also presented. It was concluded that being able to drill a horizontal production well relative to the base of the formation could help minimize abandoned oil ultimately leading to better recovery. 4 refs., 8 figs.

The ambiguous ripening nature of the fig (Ficus carica L.) fruit: a gene-expression study of potential ripening regulators and ethylene-related genes

Science.gov (United States)

Freiman, Zohar E.; Rosianskey, Yogev; Dasmohapatra, Rajeswari; Kamara, Itzhak; Flaishman, Moshe A.

2015-01-01

The traditional definition of climacteric and non-climacteric fruits has been put into question. A significant example of this paradox is the climacteric fig fruit. Surprisingly, ripening-related ethylene production increases following pre- or postharvest 1-methylcyclopropene (1-MCP) application in an unexpected auto-inhibitory manner. In this study, ethylene production and the expression of potential ripening-regulator, ethylene-synthesis, and signal-transduction genes are characterized in figs ripening on the tree and following preharvest 1-MCP application. Fig ripening-related gene expression was similar to that in tomato and apple during ripening on the tree, but only in the fig inflorescence–drupelet section. Because the pattern in the receptacle is different for most of the genes, the fig drupelets developed inside the syconium are proposed to function as parthenocarpic true fruit, regulating ripening processes for the whole accessory fruit. Transcription of a potential ripening regulator, FcMADS8, increased during ripening on the tree and was inhibited following 1-MCP treatment. Expression patterns of the ethylene-synthesis genes FcACS2, FcACS4, and FcACO3 could be related to the auto-inhibition reaction of ethylene production in 1-MCP-treated fruit. Along with FcMADS8 suppression, gene expression analysis revealed upregulation of FcEBF1, and downregulation of FcEIL3 and several FcERFs by 1-MCP treatment. This corresponded with the high storability of the treated fruit. One FcERF was overexpressed in the 1-MCP-treated fruit, and did not share the increasing pattern of most FcERFs in the tree-ripened fig. This demonstrates the potential of this downstream ethylene-signal-transduction component as an ethylene-synthesis regulator, responsible for the non-climacteric auto-inhibition of ethylene production in fig. PMID:25956879

Evaluation of agronomic and fruit quality traits of fig tree varieties (Ficus carica L.) grown in Mediterranean conditions

Energy Technology Data Exchange (ETDEWEB)

Pereira, C.; Serradilla, M.J.; Pérez-Gragera, F.; Martín, A.; Villalobos, M. C.; López-Corrales, M.

2017-07-01

In this work, the agronomic behaviour and fruit quality of ten varieties of common fig were evaluated for the establishment of new commercial orchards destined for fresh consumption. The following traits were measured: annual yield, cumulative yield, trunk cross sectional area (TCSA) and yield efficiency of each variety, as well as weight, width, total soluble solids (TSS), pH, titratable acidity (TA) and maturation index (MI) of brebas and figs. The results show that ‘Banane’ and ‘Brown Turkey’ were the earliest to enter into production, and ‘Banane’ showed the highest annual yield in the 7th green (2014), with 76 kg/tree, followed by ‘Brown Turkey’ (57.6 kg/tree), ‘Cuello Dama Blanco’ (52 kg/tree) and ‘Colar Elche’ (39 kg/tree). On the other hand, 'Cuello Dama Blanco' and 'De Rey' exhibited the better organoleptic traits, with TSS and MI values ranged from 18.7 ºBrix and 203.3 MI (‘Cuello Dama Blanco’) to 20.4 ºBrix and 187.1 MI (‘De Rey’) for brebas and from 21.4 ºBrix and 278.7 (‘Cuello Dama Blanco’) to 23.3 ºBrix and 255.6 (‘De Rey’) for figs. This study will allow the fruit grower to select the most interesting and appropriate range of varieties based on market needs taking into account the ripening season (early, middle or late) and fruit colour (green, purple or black).

Evaluation of agronomic and fruit quality traits of fig tree varieties (Ficus carica L.) grown in Mediterranean conditions

International Nuclear Information System (INIS)

Pereira, C.; Serradilla, M.J.; Pérez-Gragera, F.; Martín, A.; Villalobos, M. C.; López-Corrales, M.

2017-01-01

In this work, the agronomic behaviour and fruit quality of ten varieties of common fig were evaluated for the establishment of new commercial orchards destined for fresh consumption. The following traits were measured: annual yield, cumulative yield, trunk cross sectional area (TCSA) and yield efficiency of each variety, as well as weight, width, total soluble solids (TSS), pH, titratable acidity (TA) and maturation index (MI) of brebas and figs. The results show that ‘Banane’ and ‘Brown Turkey’ were the earliest to enter into production, and ‘Banane’ showed the highest annual yield in the 7th green (2014), with 76 kg/tree, followed by ‘Brown Turkey’ (57.6 kg/tree), ‘Cuello Dama Blanco’ (52 kg/tree) and ‘Colar Elche’ (39 kg/tree). On the other hand, 'Cuello Dama Blanco' and 'De Rey' exhibited the better organoleptic traits, with TSS and MI values ranged from 18.7 ºBrix and 203.3 MI (‘Cuello Dama Blanco’) to 20.4 ºBrix and 187.1 MI (‘De Rey’) for brebas and from 21.4 ºBrix and 278.7 (‘Cuello Dama Blanco’) to 23.3 ºBrix and 255.6 (‘De Rey’) for figs. This study will allow the fruit grower to select the most interesting and appropriate range of varieties based on market needs taking into account the ripening season (early, middle or late) and fruit colour (green, purple or black).

Rooting of stem segments from fig tree cultivars

Directory of Open Access Journals (Sweden)

Rayane Barcelos Bisi

2016-06-01

Full Text Available Although Brazil is the largest fig (Ficus carica L. producer in the Southern Hemisphere, it mainly uses only one cultivar, ‘Roxo de Valinhos’. In addition, propagation is almost entirely through hardwood cuttings. Therefore, the aim of this study was to establish a propagation method that provides more successful rooting of stem segments of fig cultivars for the purpose of expanding the genetic base of the fig tree. The cultivars used were ‘Brunswick’, ‘Calabacita’, ‘Negro de Bursa’, ‘Mini Figo’, ‘Lampa Preta’, ‘Lemon’, ‘Troiano’,’ Nazaré’, ‘Três num Prato’, ‘Princesa’, ‘Colo de Dama’, ‘Montes’, ‘Bêbera Branca’, ‘Pingo de Mel’, and ‘Roxo de Valinhos’. The propagation methods used were layering, hardwood cuttings, nodal segments, herbaceous cuttings originating from the removal of sprouts, and herbaceous cuttings obtained during growth. We found that the propagation method influences the rooting of stem segments, and cultivars differ in their rooting potential.

Some pollinators are more equal than others: Factors influencing pollen loads and seed set capacity of two actively and passively pollinating fig wasps

Science.gov (United States)

Kjellberg, Finn; Suleman, Nazia; Raja, Shazia; Tayou, Abelouahad; Hossaert-McKey, Martine; Compton, Stephen G.

2014-05-01

The nursery pollination system of fig trees (Ficus) results in the plants providing resources for pollinator fig wasp larvae as part of their male reproductive investment, with selection determining relative investment into pollinating wasps and the pollen they carry. The small size of Ficus pollen suggests that the quantities of pollen transported by individual wasps often limits male reproductive success. We assessed variation in fig wasp pollen loads and its influence on seed production in actively pollinated (Ficus montana) and passively pollinated (Ficus carica) dioecious fig trees.

Improving reservoir performance using new 'smart' well technology

International Nuclear Information System (INIS)

Roggensack, W.D.; Matthews, C.M.

1997-01-01

The technologies that were available in the past to improve reservoir performance include 3-D seismic, coiled tubing, horizontal wells, and PCP's. Future enabling technologies will also include multi-lateral wells, 'smart' wells, underbalanced drilling, and downhole fluids processing. A description of 'smart' well technology was given, defined as well completions which facilitate downhole monitoring and control of production to achieve maximum reserves recovery. The current development for 'smart' wells is focused on offshore and subsea wells for marginal field development and work-over mitigation, with the emphasis in system design for production control of horizontal and multi-lateral wells. Basic 'smart' well configuration, instrumentation and monitoring systems, applications of 'smart' well technology in the Western Canadian Sedimentary Basin, and future developments and applications for the technology in general, were also discussed. 30 figs

FiGS: a filter-based gene selection workbench for microarray data

Directory of Open Access Journals (Sweden)

Yun Taegyun

2010-01-01

Full Text Available Abstract Background The selection of genes that discriminate disease classes from microarray data is widely used for the identification of diagnostic biomarkers. Although various gene selection methods are currently available and some of them have shown excellent performance, no single method can retain the best performance for all types of microarray datasets. It is desirable to use a comparative approach to find the best gene selection result after rigorous test of different methodological strategies for a given microarray dataset. Results FiGS is a web-based workbench that automatically compares various gene selection procedures and provides the optimal gene selection result for an input microarray dataset. FiGS builds up diverse gene selection procedures by aligning different feature selection techniques and classifiers. In addition to the highly reputed techniques, FiGS diversifies the gene selection procedures by incorporating gene clustering options in the feature selection step and different data pre-processing options in classifier training step. All candidate gene selection procedures are evaluated by the .632+ bootstrap errors and listed with their classification accuracies and selected gene sets. FiGS runs on parallelized computing nodes that capacitate heavy computations. FiGS is freely accessible at http://gexp.kaist.ac.kr/figs. Conclusion FiGS is an web-based application that automates an extensive search for the optimized gene selection analysis for a microarray dataset in a parallel computing environment. FiGS will provide both an efficient and comprehensive means of acquiring optimal gene sets that discriminate disease states from microarray datasets.

Intelligent sensors for evaluating reservoir and well profiles in horizontal wells : Saudi Arabia case histories

Energy Technology Data Exchange (ETDEWEB)

Al-Buali, M.H.; Dashash, A.A. [Saudi Aramco, Dhahran (Saudi Arabia); El Gammal, T.; Arevalo, F.; Torne, J. [Halliburton Energy Services, Calgary, AB (Canada)

2010-07-01

Horizontal wells are commonly used in Saudi Arabia because they have proven advantages in optimizing production and cost. However, in order to ensure proper production, these wells occasionally require downhole measurements of the flow profile; wellbore parameters such as water entry points; and productivity index for remedial action, such as water shut off or well stimulation. Evaluating the performance of a well also contributes to a better understanding of sweep, water production and cross flow, particularly in long reach wells. The most common flow regime at downhole conditions is a stratified flow regime in which lighter oil flows on top and heavier water flows on bottom. Slugging and bubbling flow regimes are typical of low oil flow rate and are considered unstable flow regimes. This paper described a new generation of production logging tools (PLTs) that have been used on some horizontal wet producers located in Saudi Arabia. The new PLTs consists of arrays of spinners and sensors to log the entire cross section to describe the horizontal flow regime and measure the downhole production and phases. In an effort to find the best logging procedure, the PLT was tested using two methods, notably coiled tubing (CT) and wireline tractor. It was concluded that PLTs are reliable and accurate. Case studies involving planning, deployment, data acquisition, and detailed analysis of PLTs were presented. 35 refs., 1 tab., 20 figs.

21 CFR 145.130 - Canned figs.

Science.gov (United States)

2010-04-01

..., a mixture of brown sugar and honey, the statement “___ sirup of brown sugar and honey” the blank to... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Canned figs. 145.130 Section 145.130 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN...

Chronic Dietary Supplementation of 4% Figs on the Modification of Oxidative Stress in Alzheimer’s Disease Transgenic Mouse Model

Directory of Open Access Journals (Sweden)

Selvaraju Subash

2014-01-01

Full Text Available We assessed the changes in the plasma Aβ, oxidative stress/antioxidants, and membrane bound enzymes in the cerebral cortex and hippocampus of Alzheimer’s disease (AD transgenic mice (Tg2576 after dietary supplementation of Omani figs fruits for 15 months along with spatial memory and learning test. AD Tg mice on control diet without figs showed significant impairment in spatial learning ability compared to the wild-type mice on same diet and figs fed Tg mice as well. Significant increase in oxidative stress and reduced antioxidant status were observed in AD Tg mice. 4% figs treated AD Tg mice significantly attenuated oxidative damage, as evident by decreased lipid peroxidation and protein carbonyls and restoration of antioxidant status. Altered activities of membrane bound enzymes (Na+ K+ ATPase and acetylcholinesterase (AChE in AD Tg mice brain regions and was restored by figs treatment. Further, figs supplementation might be able to decrease the plasma levels of Aβ (1–40, 1–42 significantly in Tg mice suggesting a putative delay in the formation of plaques, which might be due to the presence of high natural antioxidants in figs. But this study warrants further extensive investigation to find a novel lead for a therapeutic target for AD from figs.

Search for methylation-sensitive amplification polymorphisms in mutant figs

OpenAIRE

Rodrigues, M. G F; Martins, A. B G [UNESP; Bertoni, B. W.; Figueira, A.; Giuliatti, S.

2013-01-01

Fig (Ficus carica) breeding programs that use conventional approaches to develop new cultivars are rare, owing to limited genetic variability and the difficulty in obtaining plants via gamete fusion. Cytosine methylation in plants leads to gene repression, thereby affecting transcription without changing the DNA sequence. Previous studies using random amplification of polymorphic DNA and amplified fragment length polymorphism markers revealed no polymorphisms among select fig mutants that ori...

Pair production by a deep potential well

International Nuclear Information System (INIS)

Nikishov, A.I.

1987-01-01

Solutions are obtained for the Dirac and Klein-Gordon equations with a one-dimensional symmetric potential well, having a flat bottom and arbitrary depth, width and field strengths at the walls. Quasi-stationary solutions describing a pair production by the well and the inverse process are obtained. It is shown that if the pair production probability is small, it is expressed in terms of the pair production probability on one wall and the particle oscillation frequency in the well. If the well has a supercritical depth, the lower continuum contains positron resonance scattering states at energies close to the real part of the quasi-stationary level energy (Zeldovich's effect). The qualitative dependence of the positron penetration coefficient through the wall on its energy and the well depth is an evidence that the solution of the so called one-particle Dirac equation describes in fact a many-particle system with a charge of 0 or 1

Happiness matters: productivity gains from subjetive well-being

OpenAIRE

DiMaria, Charles Henri; Peroni, Chiara; Sarracino, Francesco

2017-01-01

This article studies the link between people's subjective well-being, defined as life satisfaction, and productivity in the framework of efficiency analysis. We adopt Data Envelopment Analysis to compute productive efficiency indices using European Social Survey and AMECO data for 20 European countries. While accounting for reverse causality, we find significant efficiency gains when subjective well-being is an input to production. This supports the view that promoting subjective well-being r...

Philippine Fig wasps 1. Records and descriptions of Otitesellini (Hymenoptera Chalcidoidea, Torymidae)

NARCIS (Netherlands)

Wiebes, J.T.

1974-01-01

In 1964, by awarding to me that year's proceeds of the "Pieter Langerhuizen Fonds", the Hollandsche Maatschappij der Wetenschappen enabled me to study figs and fig wasps in the Philippines. While several Philippine fig wasps are already known from the papers by Ashmead (1904, 1905), Brown (1906),

Happiness matters: the role of well-being in productivity

OpenAIRE

DiMaria, Charles Henri; Peroni, Chiara; Sarracino, Francesco

2014-01-01

This article is about the link between people’s subjective well-being, defined as an evaluation of one’s own life, and productivity. Our aim is to test the hypothesis that subjective well-being contributes to productivity using a two step approach: first, we establish whether subjective well-being can be a candidate variable to study Total Factor Productivity; second, we assess how much subjective well-being contributes to productivity at aggregate level through efficiency gains. We adopt ...

Transient productivity index for numerical well test simulations

Energy Technology Data Exchange (ETDEWEB)

Blanc, G.; Ding, D.Y.; Ene, A. [Institut Francais du Petrole, Pau (France)] [and others

1997-08-01

The most difficult aspect of numerical simulation of well tests is the treatment of the Bottom Hole Flowing (BHF) Pressure. In full field simulations, this pressure is derived from the Well-block Pressure (WBP) using a numerical productivity index which accounts for the grid size and permeability, and for the well completion. This productivity index is calculated assuming a pseudo-steady state flow regime in the vicinity of the well and is therefore constant during the well production period. Such a pseudo-steady state assumption is no longer valid for the early time of a well test simulation as long as the pressure perturbation has not reached several grid-blocks around the well. This paper offers two different solutions to this problem: (1) The first one is based on the derivation of a Numerical Transient Productivity Index (NTPI) to be applied to Cartesian grids; (2) The second one is based on the use of a Corrected Transmissibility and Accumulation Term (CTAT) in the flow equation. The representation of the pressure behavior given by both solutions is far more accurate than the conventional one as shown by several validation examples which are presented in the following pages.

Principal permeability determination from multiple horizontal well tests

Energy Technology Data Exchange (ETDEWEB)

Economides, M. [Texas A and M Univ., TX (United States); Munoz, A.; Ehlig-Economides, C.

1998-12-31

A method for obtaining principal permeability magnitudes and direction that requires only the linear flow regime from transient tests in three horizontal wells oriented in three distinct and arbitrary directions, is described. Well design optimization strategies require knowledge of both the principal permeability orientation as well as the horizontal permeability magnitudes. When the degree of horizontal permeability anisotropy (i.e. permeability in the bedding plane with respect to direction) is significant, the productivity of a long horizontal well will depend greatly on its direction, especially when the well is first brought into production. Productivities have been found to deviate substantially among wells in the same reservoir and this deviation has been attributed to differences in well orientation. In view of this fact, measuring permeability anisotropy becomes a compelling necessity. The success of the proposed method is illustrated by a case study in which the principal permeability magnitudes and direction from three wells were used to predict the productivity of a fourth well within 10 per cent. Use of the computed principal permeabilities from the case study, it was possible to forecast the cumulative production to show the significance of well trajectory optimization on the discounted cash flow and the net present value. 20 refs., 3 figs.

KARAKTERISTIK MORFOLOGI SERTA PERKEMBANGAN FIG NYAWAI (Ficus variegata Blume DI KEBUN RAYA CIBODAS

Directory of Open Access Journals (Sweden)

Agus Astho Pramono

2015-12-01

Full Text Available Nyawai (Ficus variegata Blume merupakan salah satu jenis pohon yang memiliki prospek yang baik untuk hutan tanaman. Informasi tentang aspek biologi reproduksinya masih terbatas. Penelitian ini bertujuan untuk mengetahui karakteristik morfologi bunga dan buah nyawai, serta tahapan perkembangan fig. Penelitian dilakukan di Kebun Raya Cibodas, Jawa Barat. Kegiatan penelitian meliputi: 1 pengamatan morfologi bunga dan buah, dan 2 pengamatan perkembangan fig. Hasil penelitian menunjukkan bahwa karakteristik morfologi fig nyawai yang dijumpai di Kebun Raya Cibodas, memiliki variasi yang tinggi dalam hal ukuran dan warna. Berdasarkan karakteristik morfologi bunga, secara individual ditemui dua tipe pohon yang mencirikan sebagai pohon menghasilkan bunga jantan dan penghasil bunga betina. Perbedaan antara tahap bunga, buah muda, dan buah matang tidak dapat dibakukan berdasarkan karakteristik morfologi eksternal dari fig. Tingkat kematangan buah nyawai dapat dilakukan dengan membelah fig. Nyawai tahap kuncup bunga berakhir sekitar 6-11 hari setelah munculya tunas fig, dan tahap bunga berakhir 11-26 hari. Perkembangan kuncup bunga menjadi buah yang matang memakan waktu sekitar 2-3 bulan. Hasil penelitian menyarankan untuk tidak mengumpulkan benih dari fig yang berukuran kecil, meskipun mereka memiliki karakteristik fisik fig yang matang.

Studies of maturation fig (Ficus carica L.) treated with ionizing radiation

International Nuclear Information System (INIS)

Domarco, Rachel E.; Spotp, Maria H.F.; Blumer, Lucimara; Walder, Julio M.M.; Matraia, Clarice

1997-01-01

The effect of irradiation dose, temperature and periods of storage were analized on figs type Ramy (harvest in post-climateric stage) and type Exportation (harvest on climate stage). The figs were packed in carton boxes and irradiated with 0.0 and 1,5 kGy, a source of Cobalt-60, type Gammabeam-650, was utilized. After the irradiation, the samples were stored at room temperature (± 22 0 C) and under refrigeration ±8 0 C). The samples were analised by physic and chemical analysis (soluble solids, pH, titulable acidity and ratio) after 3, 7, 13, 20 and 26 days of storage. The Rami showed higher soluble solids, pH and ratio, of type Exportation. The radiation dose effects caused small variations in all caracteristics. The soluble solids, pH and ratio increased with radiation dose, but titulable acidity decreased for both types of figs. It was observed an increased on soluble solids, titulable acidity and pH for Ramy and Exportation. The color was influenced by type of fig, radiation dose and storage period of storage. There was change in coler with high radiation dose. (author). 5 refs., 7 figs

Effect of drying of figs (Ficus carica L.) on the contents of sugars, organic acids, and phenolic compounds.

Science.gov (United States)

Slatnar, Ana; Klancar, Urska; Stampar, Franci; Veberic, Robert

2011-11-09

Fresh figs were subjected to two different drying processes: sun-drying and oven-drying. To assess their effect on the nutritional and health-related properties of figs, sugars, organic acids, single phenolics, total phenolics, and antioxidant activity were determined before and after processing. Samples were analyzed three times in a year, and phenolic compounds were determined using high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS). In figs, monomer sugars predominate, which is important nutritional information, and the content of sugars as well as organic acids in fresh figs was lower than in dried fruits. However, the best sugar/organic acid ratio was measured after the sun-drying process. Analysis of individual phenolic compounds revealed a higher content of all phenolic groups determined after the oven-drying process, with the exception of cyanidin-3-O-rutinoside. Similarly, higher total phenolic content and antioxidant activity were detected after the drying process. With these results it can be concluded that the differences in analyzed compounds in fresh and dried figs are significant. The differences between the sun-dried and oven-dried fruits were determined in organic acids, sugars, chlorogenic acid, catechin, epicatechin, kaempferol-3-O-glucoside, luteolin-8-C-glucoside, and total phenolic contents. The results indicate that properly dried figs can be used as a good source of phenolic compounds.

Un simulateur de production de puits exploité en gas-lift. Deuxième partie : domaines de fonctionnement A Production Simulator for Gas-Lift Wells. Part Two: Working Conditions

Directory of Open Access Journals (Sweden)

Caralp L.

2006-11-01

Full Text Available Après une description des conditions d'accès aux domaines de fonctionnement étudiés, les différents types de fonctionnement du système non-linéaire sont présentés pour les trois couples de paramètres retenus. Des oscillations amorties sont mises en évidence au voisinage de la limite du fonctionnement stationnaire stable. L'influence non négligeable de la désorption gazeuse est observée. Les formes envisageables de la notion de rendement sont évoquées et pour un couple de paramètres, un espace de fonctionnement optimal est indiqué. The production simulator of a gas-lift well has already been described [1]. It should be noted that the physical modeling of the process requires 43 variables, 3 partial differential equations, 17 algebraic equations, 19 constants and 4 correlations. This entire set is used to describe the parts of the model, i. e. the annular space, the reservoir, the tubing (separated into two portions by the injection orifice all making up the complete model formed by the gathering of the elements in the light of the boundary exchange conditions. The numerical solving of this system of equations requires first-order spatio-temporal discretizing, which leads to a set of recurring equations in space (well depth and in time (time of simulation. The identification of possible types of operating, searching for their domains of existance, and the effect of different possible approximations are part of the understanding of this complex nonlinear system, which has a variety of industrial uses. Among the set of parameters making up the model, the present study is concerned with three that are directly involved in the gas-lift phenomenon, i. e. the gas flow rate upon entering the annular space QATg, the pressure at the tubing head Ptt, and the diameter of the injection orifice Do. The first two are inputs for the gas-lift black box in the sense of automation, and the third is the major physical parameter governing the

Modeling multi-lateral wells

Energy Technology Data Exchange (ETDEWEB)

Su, H. J.; Fong, W. S. [Chevron Petroleum Technology Company (United States)

1998-12-31

A method for modeling multi-lateral wells by using a computational scheme embedded in a general-purpose, finite difference simulator was described. The calculation of wellbore pressure profile for each lateral included the frictional pressure drop along the wellbore and proper fluid mixing at lateral connection points. To obtain a good production profile the Beggs and Brill correlation, a homogenous flow model, and the model proposed by Ouyang et al, which includes an acceleration term and accounts for the lubrication effect due to radial influx, were implemented. Well performance prediction results were compared using the three models. The impact of different tubing sizes on the well performance and the prediction contribution from each lateral were also studied. Results of the study in the hypothetical example and under normal field operating conditions were reviewed. 7 refs., 10 tabs., 3 figs.

Calculating Production Rate of each Branch of a Multilateral Well Using Multi-Segment Well Model: Field Example

Directory of Open Access Journals (Sweden)

Mohammed S. Al-Jawad

2017-11-01

Full Text Available Multilateral wells require a sophisticated type of well model to be applied in reservoir simulators to represent them. The model must be able to determine the flow rate of each fluid and the pressure throughout the well. The production rate calculations are very important because they give an indication about some main issues associated with multi-lateral wells such as one branch may produce water or gas before others, no production rate from one branch, and selecting the best location of a new branch for development process easily. This paper states the way to calculate production rate of each branch of a multilateral well-using multi-segment well model. The pressure behaviour of each branch is simulated dependent on knowing its production rate. This model has divided a multi-lateral well into an arbitrary number of segments depending on the required degree of accuracy and run time of the simulator. The model implemented on a field example (multi-lateral well HF-65ML in Halfaya Oil Field/Mishrif formation. The production rate and pressure behaviour of each branch are simulated during the producing interval of the multilateral well. The conclusion is that production rate of the main branch is slightly larger than a lateral branch.

Competitive exclusion among fig wasps achieved via entrainment of host plant flowering phenology.

Directory of Open Access Journals (Sweden)

Min Liu

Full Text Available Molecular techniques are revealing increasing numbers of morphologically similar but co-existing cryptic species, challenging the niche theory. To understand the co-existence mechanism, we studied phenologies of morphologically similar species of fig wasps that pollinate the creeping fig (F. pumila in eastern China. We compared phenologies of fig wasp emergence and host flowering at sites where one or both pollinators were present. At the site where both pollinators were present, we used sticky traps to capture the emerged fig wasps and identified species identity using mitochondrial DNA COI gene. We also genotyped F. pumila individuals of the three sites using polymorphic microsatellites to detect whether the host populations were differentiated. Male F. pumila produced two major crops annually, with figs receptive in spring and summer. A small partial third crop of receptive figs occurred in the autumn, but few of the second crop figs matured at that time. Hence, few pollinators were available to enter third crop figs and they mostly aborted, resulting in two generations of pollinating wasps each year, plus a partial third generation. Receptive figs were produced on male plants in spring and summer, timed to coincide with the release of short-lived adult pollinators from the same individual plants. Most plants were pollinated by a single species. Plants pollinated by Wiebesia sp. 1 released wasps earlier than those pollinated by Wiebesia sp. 3, with little overlap. Plants occupied by different pollinators were not spatially separated, nor genetically distinct. Our findings show that these differences created mismatches with the flight periods of the other Wiebesia species, largely 'reserving' individual plants for the resident pollinator species. This pre-emptive competitive displacement may prevent long term co-existence of the two pollinators.

Whither Alberta's oil production?

International Nuclear Information System (INIS)

Purvis, R.A.; Dick, A.B.

1991-01-01

It is demonstrated how a combination of old theory (decline methods and statistics) and new technology (computer graphics) can enhance decline-curve forecasts for multi-well groupings. Production and well-count forecasts are presented for four different sized groups of aggregate production. The four examples are: the small Manville pool; the Pembina Cardium, Alberta's largest oil pool; an aggregate of all reef pools of Keg River age; and an aggregate of all wells reporting conventional oil production in the province of Alberta. In each case graphical results show the historical and forecast trends for the statistical distribution of well rates, the median well rate, the aggregated rate, and the number of producing wells. It is concluded that well rate distributions for groups ranging from 15 wells in a single pool to thousands of wells in hundreds of pools are all approximately lognormal. Lognormal well rate distributions and Lorenz graphs provide qualitative and quantitative assessments of a resource base. Decline curves for the median well rate can reveal trends masked in the aggregated rate by changing well count, operating practice and degradation of the resource base. The number of producing wells in Alberta has grown from ca 9000 in 1970 to ca 24,000 in 1988, has remained constant from 1988-1990, and will start to decline as the number of suspended or abandoned wells exceeds the number of new completions. 3 refs., 13 figs., 4 figs

Why mutualist partners vary in quality: mutation-selection balance and incentives to cheat in the fig tree-fig wasp mutualism.

Science.gov (United States)

Jandér, K Charlotte; Steidinger, Brian S

2017-07-01

Mutualisms between species are ecologically ubiquitous but evolutionarily puzzling. Host discrimination mechanisms that reduce the fitness of uncooperative symbionts can stabilise mutualism against collapse, but also present a paradox - if discrimination is effective, why do uncooperative symbionts persist? Here, we test whether mutations or fitness benefits of cheating best explain the prevalence of uncooperative wasps in the fig tree-fig wasp mutualism. By combining theory with field-collected data we demonstrate that the proportions of pollen-free wasps of strongly discriminating hosts are reached with reasonable mutation rates. In contrast, in weakly discriminating hosts, the required mutation rates, assuming a single locus, are untenably high, but the required cheater advantages fall within expected ranges. We propose that when discrimination is weak, uncooperative symbionts proliferate until they reach the equilibrium proportion that balances costs and benefits of cheating. Our results suggest that mechanisms that resolve the paradox of uncooperative symbionts differ among host species. © 2017 John Wiley & Sons Ltd/CNRS.

Sensory profiles for dried fig (Ficus carica L.) cultivars commercially grown and processed in California.

Science.gov (United States)

Haug, Megan T; King, Ellena S; Heymann, Hildegarde; Crisosto, Carlos H

2013-08-01

A trained sensory panel evaluated the 6 fig cultivars currently sold in the California dried fig market. The main flavor and aroma attributes determined by the sensory panel were "caramel," "honey," "raisin," and "fig," with additional aroma attributes: "common date," "dried plum," and "molasses." Sensory differences were observed between dried fig cultivars. All figs were processed by 2 commercial handlers. Processing included potassium sorbate as a preservative and SO2 application as an antibrowning agent for white cultivars. As a consequence of SO2 use during processing, high sulfite residues affected the sensory profiles of the white dried fig cultivars. Significant differences between dried fig cultivars and sources demonstrate perceived differences between processing and storage methods. The panel-determined sensory lexicon can help with California fig marketing. © 2013 The Regents of California, Davis Campus Department of Plant Sciences.

Well-being, health, and productivity improvement after an employee well-being intervention in large retail distribution centers.

Science.gov (United States)

Rajaratnam, Augustine S; Sears, Lindsay E; Shi, Yuyan; Coberley, Carter R; Pope, James E

2014-12-01

To evaluate changes in well-being, biometric, and productivity indicators after a well-being intervention. Biometric and self-reported outcomes were assessed among 677 retail distribution center employees before and after a 6-month well-being intervention. Despite lower well-being at baseline compared to an independent random sample of workers, program participants' well-being, productivity, body mass index, systolic blood pressure, and total cholesterol improved significantly after the intervention, whereas the decline in diastolic blood pressure was not significant. Moreover, participants' specific transition across well-being segments over the intervention period demonstrated more improvement than decline. There is evidence that programs designed to improve well-being within a workforce can be used to significantly and positively impact employee health and productivity, which should result in reduced health care costs, improved employee productivity, and increased overall profitability.

Search for methylation-sensitive amplification polymorphisms in mutant figs.

Science.gov (United States)

Rodrigues, M G F; Martins, A B G; Bertoni, B W; Figueira, A; Giuliatti, S

2013-07-08

Fig (Ficus carica) breeding programs that use conventional approaches to develop new cultivars are rare, owing to limited genetic variability and the difficulty in obtaining plants via gamete fusion. Cytosine methylation in plants leads to gene repression, thereby affecting transcription without changing the DNA sequence. Previous studies using random amplification of polymorphic DNA and amplified fragment length polymorphism markers revealed no polymorphisms among select fig mutants that originated from gamma-irradiated buds. Therefore, we conducted methylation-sensitive amplified polymorphism analysis to verify the existence of variability due to epigenetic DNA methylation among these mutant selections compared to the main cultivar 'Roxo-de-Valinhos'. Samples of genomic DNA were double-digested with either HpaII (methylation sensitive) or MspI (methylation insensitive) and with EcoRI. Fourteen primer combinations were tested, and on an average, non-methylated CCGG, symmetrically methylated CmCGG, and hemimethylated hmCCGG sites accounted for 87.9, 10.1, and 2.0%, respectively. MSAP analysis was effective in detecting differentially methylated sites in the genomic DNA of fig mutants, and methylation may be responsible for the phenotypic variation between treatments. Further analyses such as polymorphic DNA sequencing are necessary to validate these differences, standardize the regions of methylation, and analyze reads using bioinformatic tools.

Geologic and porous media factors affecting the 2007 production response characteristics of the JOGMEC/NRCan/AURORA Mallik gas hydrate production research well

Energy Technology Data Exchange (ETDEWEB)

Dallimore, S. R.; Wright, J. F.; Nixon, F. M. [Natural Resources Canada, Sidney, BC (Canada). Geological Survey of Canada; Kurihara, M. [Japan Oil Engineering, Tokyo (Japan); Yamamoto, K.; Fujii, T.; Fujii, K.; Numasawa, M.; Yasuda, M. [Japan Oil, Gas, Metals National Corp., Chiba (Japan). Technical Research Centre; Imasato, Y. [Schlumberger K.K., Fuchinombe (Japan)

2008-07-01

The joint research project between Japan Oil, Gas and Metals National Corporation (JOGMEC), Natural Resources Canada (NRCan) and the Aurora Research Institute was conducted in an effort to measure and monitor the response of a terrestrial gas hydrate reservoir to pressure draw down. This paper reviewed the geologic setting and porous media conditions of a concentrated gas hydrate production interval between 1093 and 1105 m. The short-duration production test was conducted at the Mallik site in Canada's Mackenzie Delta in April 2007. The production interval consists of a sand-dominated succession with occasional silty sand interbeds. Gas hydrate occurs primarily within the sediment pore spaces, with concentrations ranging between 50-90 per cent. Experiments on pore water salinity and porous media conditions on pressure-temperature stability suggest that the partition between gas hydrate stability and instability should be considered as a phase boundary zone rather than a discrete threshold. The experiment revealed that there are significant changes to the physical properties following gas hydrate dissociation, with sediments containing no hydrate behaving as unconsolidated sands. A strong reservoir response to pressure draw down was observed with increasing gas flow during the testing period. Sand inflow to the well during the test may be attributed to loss of sediment strength during gas hydrate dissociation, with the sediment behaving as a gasified slurry. It was concluded that the gas flow response observed during the 2007 production test at Mallik was highly influenced by porous media properties and by the geological heterogeneities which may initiate high permeability conduits in sediments within the production interval of the Mallik gas hydrate reservoir. 18 refs., 6 figs.

Provisional host catalogue of Fig wasps (Hymenoptera, Chalcidoidea)

NARCIS (Netherlands)

Wiebes, J.T.

1966-01-01

INTRODUCTION In this catalogue — entitled "provisional" because our knowledge of the subject is still so evidently incomplete — all species of Ficus mentioned as hosts of fig wasps, are listed with the Hymenoptera Chalcidoidea reared from their receptacles. The names used for the Agaonidae are in

Efficacy of Tissue Culture in Virus Elimination from Caprifig and Female Fig Varieties (Ficus carica L.

Directory of Open Access Journals (Sweden)

Chokri Bayoudh

2017-06-01

Full Text Available Fig mosaic disease (FMD is a viral disease that spreads in all Tunisian fig (Ficus carica L. orchards. RT-PCR technique was applied to leaf samples of 29 fig accessions of 15 fig varieties from the fig germplasm collection of High Agronomic Institute (I.S.A of Chatt-Mariem, to detect viruses associated to FMD. Analysis results show that 65.5% of the accessions (19/29 and 80.0% (12/15 of the fig varieties are infected by FMD-associated viruses. From all fig accessions, 41.4% of them are with single infection (one virus and 24.1% are with multi-infections (2 virus and more. Viruses infecting fig leaf samples are Fig mosaic virus (FMV (20.7%, Fig milde-mottle-associated virus (FMMaV (17.25%, Fig fleck associated virus (FFkaV (3.45%, and Fig cryptic virus (FCV (55.17%. A reliable protocol for FCV and FMMaV elimination from 4 local fig varieties Zidi (ZDI, Soltani (SNI, Bither Abiadh (BA, and Assafri (ASF via in vitro culture of 3 meristem sizes was established and optimized. With this protocol, global sanitation rates of 79.46%, 65.55%, 68.75%, and 70.83% respectively for ZDI, SNI, BA, and ASF are achieved. For all sanitized varieties, the effectiveness of meristem culture for the elimination of FCV and FMMaV viruses was related to meristem size. Meristem size 0.5 mm provides the highest sanitation rates ranging from 70% to 90%.

Land use history and population dynamics of free-standing figs in a maturing forest.

Directory of Open Access Journals (Sweden)

Larissa Albrecht

Full Text Available Figs (Ficus sp. are often considered as keystone resources which strongly influence tropical forest ecosystems. We used long-term tree-census data to track the population dynamics of two abundant free-standing fig species, Ficus insipida and F. yoponensis, on Barro Colorado Island (BCI, a 15.6-km2 island in Lake Gatún, Panama. Vegetation cover on BCI consists of a mosaic of old growth (>400 years and maturing (about 90-150 year old secondary rainforest. Locations and conditions of fig trees have been mapped and monitored on BCI for more than 35 years (1973-2011, with a focus on the Lutz Catchment area (25 ha. The original distribution of the fig trees shortly after the construction of the Panama Canal was derived from an aerial photograph from 1927 and was compared with previous land use and forest status. The distribution of both fig species (~850 trees is restricted to secondary forest. Of the original 119 trees observed in Lutz Catchment in 1973, >70% of F. insipida and >90% of F. yoponensis had died by 2011. Observations in other areas on BCI support the trend of declining free-standing figs. We interpret the decline of these figs on BCI as a natural process within a maturing tropical lowland forest. Senescence of the fig trees appears to have been accelerated by severe droughts such as the strong El Niño event in the year 1982/83. Because figs form such an important food resource for frugivores, this shift in resource availability is likely to have cascading effects on frugivore populations.

Determination of proton-induced production cross sections and production rates of {sup 129}I from Te

Energy Technology Data Exchange (ETDEWEB)

Schnabel, C.; Lopez-Guitierrez, J.M.; Suter, M. [Eidgenoessische Technische Hochschule, Zurich (Switzerland); Synal, H.A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Gloris, M.; Leya, I.; Michel, R. [Hannover Univ. (Germany); Herpers, U. [Koeln Univ. (Germany)

1997-09-01

In order to model the production of {sup 129}I in meteoroids, proton-induced production cross sections in the medium range of {sup 129}I from Te as well as production from meteoroid simulation experiments have been determined. {sup 129}I is a very important cosmogenic nuclide to study the constancy of cosmic radiation on long time scales. (author) 2 figs., 2 refs.

Review of Well Operator Files for Hydraulically Fractured Oil and Gas Production Wells: Well Design and Construction Fact Sheet

Science.gov (United States)

EPA reviewed a statistically representative sample of oil and gas production wells reported by nine service companies to help understand the role of well design and construction practices preventing pathways for subsurface fluid movement.

Mechanics of coalbed methane production

Energy Technology Data Exchange (ETDEWEB)

Creel, J C; Rollins, J B [Crawley, Gillespie and Associates, Inc. (United Kingdom)

1994-12-31

Understanding the behaviour of coalbed methane reservoirs and the mechanics of production is crucial to successful management of coalbed methane resources and projects. This paper discusses the effects of coal properties and coalbed methane reservoir characteristics on gas production rates and recoveries with a review of completion techniques for coalbed methane wells. 4 refs., 17 figs.

A horizontal well analysis from a view of its productivity

Directory of Open Access Journals (Sweden)

Lucia Sciranková

2006-10-01

Full Text Available The 1990s may become known in the oil field as the decade of the horizontal well. Horizontal wells can increase the production rate and the ultimate recovery, and can reduce the number of platforms on wells required to develop a reservoir.An empirical equation to calculate the inflow performance of two-phase flow for a vertical and a horizontal well in regime of dissolved gas presented by Vogel in 1968. His equation was based on the results of reservoir simulation. The created model whore result (output is the ratio of the productivity of a horizontal well to the productivity of a vertical well for a given area expressed by anumber of vertical wells the replaced by one horizontal well. The model is applied for a concrete ideological model.

Well-being improvement in a midsize employer: changes in well-being, productivity, health risk, and perceived employer support after implementation of a well-being improvement strategy.

Science.gov (United States)

Hamar, Brent; Coberley, Carter; Pope, James E; Rula, Elizabeth Y

2015-04-01

To evaluate employee well-being change and associated change in productivity, health risk including biometrics, and workplace support over 2 years after implementation of a well-being improvement strategy. This was an employer case study evaluation of well-being, productivity (presenteeism, absenteeism, and job performance), health risk, and employer support across three employee assessment spanning 2 years. Employee well-being was compared with an independent sample of workers in the community. Well-being and job performance increased and presenteeism and health risk decreased significantly over the 2 years. Employee well-being started lower and increased to exceed community worker averages, approaching significance. Well-being improvement was associated with higher productivity across all measures. Increases in employer support for well-being were associated with improved well-being and productivity. This employer's well-being strategy, including a culture supporting well-being, was associated with improved health and productivity.

Drilling and well technology

Energy Technology Data Exchange (ETDEWEB)

Milheim, K. [Mining University Leoben Institute for Drilling Technology, (Austria)

1996-12-31

Over a billion dollars a year is lost by exploration and production companies drilling wells because of the lack of learn curve management (LMC) practices. This paper presents the importance of the LMC concept, what it is, why LMC has not yet been recognized as a major initiative for improving drilling cost performance. The paper discusses the different types of planning, problems with implementation of plans, the use and misuse of drilling results and data bases, and the lack of post analysis practices. The major point of the paper is to show the massive savings that can be achieved by valuing LMC, learning LMC and successfully implementing LMC. . 2 refs., 5 figs.

Sand control in open horizontal wells - case histories and developments

Energy Technology Data Exchange (ETDEWEB)

Rovina, P. S. [Petrobras (Brazil); Filho, E. L.

1998-12-31

A number of unconventional sand control completion techniques have been adopted by Petrobras to achieve higher productivity, delay gas/water conning, and to support unconsolidated formations in water injection wells in recently discovered new fields in the Amazon forest and in the deep water offshore Campos Basin. Experiences acquired running screens on 23 horizontal open wells are described. Horizontal wells confirmed the expectations in both locations, i;e. in the Amazon forests water conning was delayed, and in the Marlim field productivity increase to three times that of conventional wells. It was also observed that the API threads used in the screen basepipe for horizontal wells with long radius and short open hole section were adequate, but in the new deep water fields where extended reach wells and long open hole section are likely to be common, it is necessary to use premium threads. 2 refs., 1 tab., 5 figs.

Optimization of flavored drinking yoghurt formula containing fig syrup and Bacillus coagulans and evaluation of some physicochemical characteristics and its overall acceptability

Directory of Open Access Journals (Sweden)

D Jafarpour

2018-03-01

Conclusion: Drinking yoghurt containing 10% pectin fig syrup and 1% has higher score of physicochemical properties and overall acceptability than other received samples; so this product can be introduced as a probiotic dairy and nutritious drink.

Analyses of production tests and MDT tests conducted in Mallik and Alaska methane hydrate reservoirs : what can we learn from these well tests?

Energy Technology Data Exchange (ETDEWEB)

Kurihara, M.; Funatsu, K.; Ouchi, H. [Japan Oil Engineering Co., Tokyo (Japan); Masuda, Y. [Tokyo Univ., Tokyo (Japan). School of Engineering; Yamamoto, K. [Japan Oil, Gas and Metals National Corp., Tokyo (Japan); Narita, H. [National Inst. of Advanced Industrial Science and Technology, Tokyo (Japan); Dallimore, S.R. [Natural Resources Canada, Ottawa, ON (Canada). Geological Survey of Canada; Collett, T.S. [United States Geological Survey, Reston, VA (United States); Hancock, S.H. [APA Petroleum Engineering Ltd., Calgary, AB (Canada)

2008-07-01

This paper described a series of pressure drawdown tests conducted to evaluate a modular formation dynamics tester (MDT) wireline tool. The tests were conducted at the Mallik methane hydrate (MH) reservoir as well as in MH reservoirs in Alaska over a period of several years. Production tests were also conducted to evaluate depressurization methods, and measure production and bottomhole pressure (BHP) below known MH stability pressures in order to estimate permeability and MH dissociation radius properties. The results of the tests were then history-matched using a numerical simulator. An analysis of the simulation study showed that the MDT tests were useful in estimating initial effective permeability levels in the presence of MH. However, wellbore storage erased important data used to indicate the radius of MH dissociation and effective permeability after partial MH dissociation. The study also showed that steady flow conditions must be established before obtaining solutions from history-matched production tests. Parameters accurately estimated using the MDT and production tests were outlined, and suggestions for future designs and analyses for MH reservoirs were presented. 14 refs., 7 tabs., 17 figs.

Surrogate reservoir models for CSI well probabilistic production forecast

Directory of Open Access Journals (Sweden)

Saúl Buitrago

2017-09-01

Full Text Available The aim of this work is to present the construction and use of Surrogate Reservoir Models capable of accurately predicting cumulative oil production for every well stimulated with cyclic steam injection at any given time in a heavy oil reservoir in Mexico considering uncertain variables. The central composite experimental design technique was selected to capture the maximum amount of information from the model response with a minimum number of reservoir models simulations. Four input uncertain variables (the dead oil viscosity with temperature, the reservoir pressure, the reservoir permeability and oil sand thickness hydraulically connected to the well were selected as the ones with more impact on the initial hot oil production rate according to an analytical production prediction model. Twenty five runs were designed and performed with the STARS simulator for each well type on the reservoir model. The results show that the use of Surrogate Reservoir Models is a fast viable alternative to perform probabilistic production forecasting of the reservoir.

Risk assessment for SAGD well blowouts

Energy Technology Data Exchange (ETDEWEB)

Worth, D.; Alhanati, F.; Lastiwka, M. [C-FER Technologies, Edmonton, AB (Canada); Crepin, S. [Petrocedeno, Caracas (Venezuela)

2008-10-15

This paper discussed a steam assisted gravity drainage (SAGD) pilot project currently being conducted in Venezuela's Orinoco Belt. A risk assessment was conducted as part of the pilot program in order to evaluate the use of single barrier completions in conjunction with a blowout response plan. The study considered 3 options: (1) an isolated double barrier completion with a downhole safety valve (DHSV) in the production tubing string and a packer in the production casing annulus; (2) a partially isolated completion with no DHSV and a packer in the production casing annulus; and (3) an open single barrier completion with no additional downhole barriers. A reservoir model was used to assess the blowout flowing potential of SAGD well pairs. The probability of a blowout was estimated using fault tree analysis techniques. Risk was determined for various blowout scenarios, including blowouts during normal and workover operations, as well as blowouts through various flow paths. Total risk for each completion scenario was also determined at 3 different time periods within the production life of the well pair. The possible consequences of a blowout were assessed using quantitative consequence models. Results of the study showed that environmental and economic risks were much higher for the open completion technique. Higher risks were also associated with the earlier life of the completion strings. 20 refs., 3 tabs., 19 figs.

Spa Products as Main Orientation in Wellness Tourism in Bali

Directory of Open Access Journals (Sweden)

I Gusti Made Wendri

2018-03-01

Full Text Available Wellness Spa is developed from conventional spa in response to the influence of the present tourism trend which is much in demand of the achievement of wellness aspect of life. Wellness tourism is a subdivision of health tourism. Wellness spa is the core product for wellness tourism. In fact, to date, people’s knowledge about wellness spa is still poor. This fact has motivated the implementation of this research under the title “Spa Products as Main Orientation in Wellness Tourism in Bali”. The objective of the research is to find out what products becomes the orientation in wellness tourism in Ubud as well as in South Badung. This qualitative research uses a phenomenological approach to the study. The determination of the informants is purposively done, and the information concerning the object of the research is obtained by deep interview controlled by a checklist based on Wellness Wheel concept. The location of the research is Ubud and South Badung areas, the latter represented by Nusa Dua, Jimbaran, and Kuta. The research uses 10 informants, 5 from Ubud and 5 from South Badung. The informants include spa managers and spa therapists. The result of the research shows that such packages as Bali spa ritual package, personal growth, and eco-adventure package become the most attractive products offered by wellness tourism industry and enjoyed by the tourists for the fulfilment of the tourists' wellness needs.

Production optimization of remotely operated gas wells

Energy Technology Data Exchange (ETDEWEB)

Juell, Aleksander

2012-07-01

From the introduction: The Remote Operations in Oklahoma Intended for Education (ROOKIE) project is a remote field laboratory constructed as a part of this research project. ROOKIE was initiated to provide data in research on production optimization of low productivity gas wells. In addition to this, ROOKIE is used as a teaching tool. Much of the remote operations technology used in the ROOKIE project has been used by the industry for several decades. The first use of remote data acquisition in Oklahoma was in 1989, as described by Luppens [7]. Even though this, for the most part, is old technology, the ROOKIE project is the first remote operations project set up with research and teaching as the main focus. This chapter will discuss the process of establishing the remote field laboratory and the data storage facilities. Results from the project will also be discussed. All testing, instrumentation installation, and modifications to the wells discussed in this chapter was performed by the author. The communication system between the well and NTNU, and the storage database was installed and configured by the author.(Author)

Water availability determines the richness and density of fig trees within Brazilian semideciduous forest landscapes

Science.gov (United States)

Coelho, Luís Francisco Mello; Ribeiro, Milton Cezar; Pereira, Rodrigo Augusto Santinelo

2014-05-01

The success of fig trees in tropical ecosystems is evidenced by the great diversity (+750 species) and wide geographic distribution of the genus. We assessed the contribution of environmental variables on the species richness and density of fig trees in fragments of seasonal semideciduous forest (SSF) in Brazil. We assessed 20 forest fragments in three regions in Sao Paulo State, Brazil. Fig tree richness and density was estimated in rectangular plots, comprising 31.4 ha sampled. Both richness and fig tree density were linearly modeled as function of variables representing (1) fragment metrics, (2) forest structure, and (3) landscape metrics expressing water drainage in the fragments. Model selection was performed by comparing the AIC values (Akaike Information Criterion) and the relative weight of each model (wAIC). Both species richness and fig tree density were better explained by the water availability in the fragment (meter of streams/ha): wAICrichness = 0.45, wAICdensity = 0.96. The remaining variables related to anthropic perturbation and forest structure were of little weight in the models. The rainfall seasonality in SSF seems to select for both establishment strategies and morphological adaptations in the hemiepiphytic fig tree species. In the studied SSF, hemiepiphytes established at lower heights in their host trees than reported for fig trees in evergreen rainforests. Some hemiepiphytic fig species evolved superficial roots extending up to 100 m from their trunks, resulting in hectare-scale root zones that allow them to efficiently forage water and soil nutrients. The community of fig trees was robust to variation in forest structure and conservation level of SSF fragments, making this group of plants an important element for the functioning of seasonal tropical forests.

Semivariogram models for estimating fig fly population density throughout the year

Directory of Open Access Journals (Sweden)

Mauricio Paulo Batistella Pasini

2014-07-01

Full Text Available The objective of this work was to select semivariogram models to estimate the population density of fig fly (Zaprionus indianus; Diptera: Drosophilidae throughout the year, using ordinary kriging. Nineteen monitoring sites were demarcated in an area of 8,200 m2, cropped with six fruit tree species: persimmon, citrus, fig, guava, apple, and peach. During a 24 month period, 106 weekly evaluations were done in these sites. The average number of adult fig flies captured weekly per trap, during each month, was subjected to the circular, spherical, pentaspherical, exponential, Gaussian, rational quadratic, hole effect, K-Bessel, J-Bessel, and stable semivariogram models, using ordinary kriging interpolation. The models with the best fit were selected by cross-validation. Each data set (months has a particular spatial dependence structure, which makes it necessary to define specific models of semivariograms in order to enhance the adjustment to the experimental semivariogram. Therefore, it was not possible to determine a standard semivariogram model; instead, six theoretical models were selected: circular, Gaussian, hole effect, K-Bessel, J-Bessel, and stable.

Strategy For A/M Area Production Wells

International Nuclear Information System (INIS)

Jackson, D.G.; Looney, B.B.; Bergren, C.L.; Wells, D.G.; Beavers, B.A.

1996-01-01

Savannah River Site personnel are planning a two phase program in order to significantly reduce the amount of dissolved chlorinated solvents that are being transported to the McQueen branch Aquifer via the wellbore and gravel pack zones of the A/M Area production well system. In Phase I of the program a commercially available inflatable packer and check valve assembly will be installed inside the casing at the altitude of the McQueen Branch Confining Unit. This immediate, short term solution will eliminate the majority of the contaminant mass that is moving downward through the wellbore of the A/M Area production wells. During the packer installation process several pre- and post- testing activities are planned to aid SRS investigators in understanding the dynamics of the flow conditions and effectiveness of the installed assembly.The second phase of the program will address the small amount of contaminant mass that is moving downward through the continuous gravel pack of the production wells. The investigative data obtained during Phase I of this program will be beneficial for developing plans and appropriate actions for the Phase II activities.In addressing potential remediation actions for the dissolved solvents in the Cretaceous sediments, due to the limited vertical extent of the plume and the size, any remediation program should incorporate carefully located wells screened vertically within the plume trajectory.This optimizing approach will minimize water treatment and pumping costs and maximize the amount of contaminant removal. Flow and contaminant transport modeling scenarios are currently being developed to address the Cretaceous sediments. These efforts involve incorporating the available characterization data and the results of previous modeling work to more precisely define the extent and magnitude of this plume. SRS proposes incorporating depth discrete sampling during any future characterization effort to optimize any proposed remediation system

Comparing the contributions of well-being and disease status to employee productivity.

Science.gov (United States)

Gandy, William M; Coberley, Carter; Pope, James E; Wells, Aaron; Rula, Elizabeth Y

2014-03-01

To compare employee overall well-being to chronic disease status, which has a long-established relationship to productivity, as relative contributors to on-the-job productivity. Data from two annual surveys of three companies were used in longitudinal analyses of well-being as a predictor of productivity level and productivity change among 2629 employees with diabetes or without any chronic conditions. Well-being was the most significant predictor of productivity cross-sectionally in a model that included disease status and demographic characteristics. Longitudinally, changes in well-being contributed to changes in productivity above and beyond what could be explained by the presence of chronic disease or other fixed characteristics. These findings support the use of well-being as the broader framework for understanding, explaining, and improving employee productivity in both the healthy and those with disease.

30 CFR 250.1151 - How often must I conduct well production tests?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How often must I conduct well production tests... Requirements Well Tests and Surveys § 250.1151 How often must I conduct well production tests? (a) You must conduct well production tests as shown in the following table: You must conduct: And you must submit to...

PHENOLOGY AND YIELD OF THE ‘ROXO DE VALINHOS’ FIG CULTIVAR IN WESTERN POTIGUAR

Directory of Open Access Journals (Sweden)

FRANCISCO SIDENE OLIVEIRA SILVA

2017-01-01

Full Text Available The ‘Roxo de Valinhos’ fig is one of the most widely grown varieties in the world, however, there are still few studies on the phenology and yield of fig trees, especially in semi-arid regions. This study evaluated the phenology and yield aspects of the ‘Roxo de Valinhos’ fig cultivar in Western Potiguar. The experiment was carried out from July to December 2015 in the didactic orchard of the Federal Rural University of the Semi-Arid, UFERSA. The following phenological aspects were analyzed: pruning at the beginning of budding, emergence and maturity of the first fruit, beginning of harvest, length and diameter of branches, number of fruits per branch, length and diameter of fruits, absolute growth rate, yield per plant, number of fruits per plant, and fruit weight. We used descriptive statistics; for quantitative and qualitative characteristics, we used regression analysis and means test, through Tukey´s test at 5% probability. Fig trees showed good adaptability to semi-arid regions and precocity when compared to fig trees from temperate regions, in all phenological stages; the studied cultivar showed promising results for cultivation in this region.

Chlorophyll metabolism in pollinated vs. parthenocarpic fig fruits throughout development and ripening.

Science.gov (United States)

Rosianskey, Yogev; Dahan, Yardena; Yadav, Sharawan; Freiman, Zohar E; Milo-Cochavi, Shira; Kerem, Zohar; Eyal, Yoram; Flaishman, Moshe A

2016-08-01

Expression of 13 genes encoding chlorophyll biosynthesis and degradation was evaluated. Chlorophyll degradation was differentially regulated in pollinated and parthenocarpic fig fruits, leading to earlier chlorophyll degradation in parthenocarpic fruits. Varieties of the common fig typically yield a commercial summer crop that requires no pollination, although it can be pollinated. Fig fruit pollination results in larger fruit size, greener skin and darker interior inflorescence color, and slows the ripening process compared to non-pollinated fruits. We evaluated the effect of pollination on chlorophyll content and levels of transcripts encoding enzymes of the chlorophyll metabolism in fruits of the common fig 'Brown Turkey'. We cloned and evaluated the expression of 13 different genes. All 13 genes showed high expression in the fruit skin, inflorescences and leaves, but extremely low expression in roots. Pollination delayed chlorophyll breakdown in the ripening fruit skin and inflorescences. This was correlated with the expression of genes encoding enzymes in the chlorophyll biosynthesis and degradation pathways. Expression of pheophorbide a oxygenase (PAO) was strongly negatively correlated with chlorophyll levels during ripening in pollinated fruits; along with its high expression levels in yellow leaves, this supports a pivotal role for PAO in chlorophyll degradation in figs. Normalizing expression levels of all chlorophyll metabolism genes in the pollinated and parthenocarpic fruit skin and inflorescences showed three synthesis (FcGluTR1, FcGluTR2 and FcCLS1) and three degradation (FcCLH1, FcCLH2 and FcRCCR1) genes with different temporal expression in the pollinated vs. parthenocarpic fruit skin and inflorescences. FcCAO also showed different expressions in the parthenocarpic fruit skin. Thus, chlorophyll degradation is differentially regulated in the pollinated and parthenocarpic fruit skin and inflorescences, leading to earlier and more sustained

Frame conditions for a well-functioning end user market

International Nuclear Information System (INIS)

Livik, Klaus

1997-10-01

The aim of this report is to describe and define different frame conditions being necessary for the development of a well-functioning end user market. The report describes the sharing of roles between end users, grid owners, suppliers, system operators and market operators in the power market, and it points out how the interplay between these roles should be arranged. A particular attention is laid on how to involve the end user relations into the five different market roles during the development of a more active end user market. Products and eventual potentials are described and discussed being based on estimates as well as load measurements. 17 figs., 4 tabs

FigSum: automatically generating structured text summaries for figures in biomedical literature.

Science.gov (United States)

Agarwal, Shashank; Yu, Hong

2009-11-14

Figures are frequently used in biomedical articles to support research findings; however, they are often difficult to comprehend based on their legends alone and information from the full-text articles is required to fully understand them. Previously, we found that the information associated with a single figure is distributed throughout the full-text article the figure appears in. Here, we develop and evaluate a figure summarization system - FigSum, which aggregates this scattered information to improve figure comprehension. For each figure in an article, FigSum generates a structured text summary comprising one sentence from each of the four rhetorical categories - Introduction, Methods, Results and Discussion (IMRaD). The IMRaD category of sentences is predicted by an automated machine learning classifier. Our evaluation shows that FigSum captures 53% of the sentences in the gold standard summaries annotated by biomedical scientists and achieves an average ROUGE-1 score of 0.70, which is higher than a baseline system.

Figs Are More Than Fallback Foods: The Relationship between Ficus and Cebus in a Tropical Dry Forest

Directory of Open Access Journals (Sweden)

Nigel A. Parr

2011-01-01

Full Text Available In many studies on primate feeding ecology, figs (Ficus spp. are characterized as fallback foods, utilized only when preferred sources of food are unavailable. However, for white-faced capuchin monkeys (Cebus capucinus living in northwestern Costa Rica, figs are a consistently important resource and may increase groupwide energy intake. We investigated whether visits to figs affect ranging and behavioural patterns of capuchins. Although daily range length and average travel speed do not differ on days when fig trees are visited, capuchins spend more time in directed travel and more time stationary on “fig days”. Capuchins also increase time spent foraging for fruit and decrease time spent foraging for invertebrates on days when figs trees are visited. Capuchins experience higher energy intake and lower energy output on “fig” days. Thus, the patterns of foraging for figs support an energy-maximization strategy and constitute an important nutritional resource for capuchins.

Constant rate natural gas production from a well in a hydrate reservoir

International Nuclear Information System (INIS)

Ji Chuang; Ahmadi, Goodarz; Smith, Duane H.

2003-01-01

Using a computational model, production of natural gas at a constant rate from a well that is drilled into a confined methane hydrate reservoir is studied. It is assumed that the pores in the reservoir are partially saturated with hydrate. A linearized model for an axisymmetric condition with a fixed well output is used in the analysis. For different reservoir temperatures and various well outputs, time evolutions of temperature and pressure profiles, as well as the gas flow rate in the hydrate zone and the gas region, are evaluated. The distance of the decomposition front from the well as a function of time is also computed. It is shown that to maintain a constant natural gas production rate, the well pressure must be decreased with time. A constant low production rate can be sustained for a long duration of time, but a high production rate demands unrealistically low pressure at the well after a relatively short production time. The simulation results show that the process of natural gas production in a hydrate reservoir is a sensitive function of reservoir temperature and hydrate zone permeability

Role of coal combustion products in sustainable construction materials

Energy Technology Data Exchange (ETDEWEB)

Naik, T.R.; Siddique, R.; Vaniker, S. [University of Wisconsin-Milwaukee, Milwaukee, WI (USA). UWM Center for Products Utilization, College of Engineering and Applied Science

2003-07-01

The paper describes various coal combustion products, CCPs produced in the process of power generation. These include fly ash, bottom ash, boiler slag and flue gas desulfurization products. Typical test protocol used for testing, analysis and evaluation of CCPs, as well as the current best recycling use options for these materials are discussed. Materials, productions, properties, and potential applications in the manufacture of emerging materials for sustainable construction, as well as environmental impact are also briefly discussed. 47 refs., 16 figs., 8 tabs.

Proverbe et expression figée

Directory of Open Access Journals (Sweden)

Laura Cîţu

2008-11-01

Full Text Available Les deux types d’énoncés sentencieux abordés dans cette étude ne feront pas l’objet d’une analyse formelle de type structural, se proposant de décrire une éventuelle architecture et des propriétés syntaxiques spécifiques. Il ne s’agira non plus d’une approche stylistique, rhétorique ou pragmatique. En revanche, c’est une vision de sémantique référentielle qui sera projetée sur ce type de séquences, laquelle essaiera de surprendre un trait fondamental et constant des proverbes, qui permet de le distinguer des expressions figées, et dont l’identification est apte aussi de prédire quelles phrases de la langue pourraient accéder au statut des proverbes.

Evaluating reservoir aspects from database on infill/step-out wells

Energy Technology Data Exchange (ETDEWEB)

Springer, S.J. [Springer Consulting Services, Calgary, AB (Canada)

2006-07-01

Statistical plots of production data were used as the basis for calculating simple parameters in order to develop insights into the performance of infill wells drilled in the Western Canadian Sedimentary Basin (WCSB). Unique characteristics of the performance of wells drilled in different parts of the basin were also discussed with the aim of assisting in the screening of future infill drilling projects. The aim of the paper was to demonstrate the effectiveness of a simple statistical analysis of the performance curves and to determine a method of characterizing lateral heterogeneity as well as risks in developing similar pools by infill drilling. The main data sources were the provincial Oil and Gas Reserves Books. Production data were obtained from a commercial data base. Data from wells at a heavy oil sandstone reservoir and a shallow sandstone gas reservoir were evaluated. In both pools, the horizontal infill wells performed better than the vertical wells.The initial rate of the median well was obtained by referencing the wells to its start time. A rate time plot for the first 5 years was prepared for the median wells. Similar plots for the average, 25 and 75 percentile wells were also generated. A cumulative production-frequency plot was generated for each pool. Most of the plots showed a fairly linear trend, reflecting a lognormal distribution. The slope of the lognormal plot reflected the lateral heterogeneity within the prospect. It was concluded that the analysis of the rate-cumulative production plot provided a method of accessing which percentages of the production were incremental reserves and which percentage were accelerated production. 7 refs., 9 tabs., 7 figs.

Fines stabilizing agent reduces production decline rates in steam injected wells

Energy Technology Data Exchange (ETDEWEB)

Castillo de Castillo, Milagros; Fernandez Andrades, Jarvi [PDVSA - Petroleos de Venezuela S.A., Caracas (Venezuela); Navarro Cornejo, Willian; Curtis, James [BJ Services do Brasil Ltda., RJ (Brazil)

2004-07-01

The Bachaquero Lago heavy oil field, located in Lake Maracaibo, Venezuela, with an area of 9800 ha, in which more than 1800 wells have been drilled. The Lagunillas formation in this field is a mature, clastic, unconsolidated sandstone of Miocene age with good permeability. Clays are present, in laminated form or dispersed within the productive sandstones. Heavy oil, less than 12 deg API, is produced by cyclic steam injection. Wells are completed with cased-hole gravel packs to prevent sand and fines production. Rapid production decline rates are typically observed after the steam injection cycles, due to fines migration and plugging of the reservoir and gravel pack. This paper describes the methodology used to treat the wells with a fines stabilizing agent during the steam injection cycles in order to successfully reduce the subsequent production decline rate. Results from a multi-well pilot project are presented and analyzed. (author)

Well integrity in heavy oil wells : challenges and solutions

Energy Technology Data Exchange (ETDEWEB)

Taoutaou, S.; Osman, T.M.; Mjthab, M. [Schlumberger (Syrian Arab Republic); Succar, N. [Oudeh Petroleum, Damascus (Syrian Arab Republic)

2010-07-01

The Oudeh Petroleum Company (OPC) has used cyclic steam (the Huff and Puff technique) since 2006 to produce heavy oil from its OPC field that has an estimated 79.49 to 95.39 million cubic meters of oil contained in the Jurassic and Triassic reservoirs of the Butmah and Kurachine formations in Syria. Accumulations of oil and gas are present in the main Oudeh structure at depths between 1300 and 2250 meters. The Huff and Puff technique involves 3 phases. In the first phase which lasts about 1 month, steam is injected at 348 degrees C and 17.MPa to melt the wax condensate in the formation in order to decrease heavy oil viscosity. Phase 2 involves 3 soaking days. In phase 3, which lasts 2 to 3 months, the production rate is doubled compared to wells without steam. The cycle is then resumed once the pressure drops. The temperature cycling can compromise the well integrity through loss of hydraulic isolation in the cement sheath and thereby reduce hydrocarbon recovery. This paper described how the OPC has managed to achieved complete well integrity using an advanced cement system in more than 200 wells exposed to steam injection temperatures up to 348 degrees C and the associated high induced thermal stresses. The methodology for risk analysis of the cement sheath failure under steam stimulation was described along with the selection criteria for the advanced cement system to withstand temperature cycling. Two case histories involving a 50 well database were presented. 5 refs., 2 tabs., 13 figs.

Opukushi horizontal well campaign: completion design and wellbore clean-up

Energy Technology Data Exchange (ETDEWEB)

Osode, P. I.; Dijkema, R. W. [Shell Petroleum Development Company of Nigeria (Nigeria)

1998-12-31

A three-well completion design and installation technique, and a horizontal well clean-up procedure employed as part of the on-going initiative to improve the Opukushi Oilfield in Nigeria was described. In an effort to improve the Field`s ultimate recovery and production potential, horizontal well technology was introduced during the second phase of field development which started in 1995. Openhole liner completion was the design of choice, dictated by the unconsolidated sandstone formation which characterizes the shallow horizons of the field. All three wells were completed in thin oil rim sands of about 70 ft, with 5-1/2 inch by 4-1/2 inch tapered slotted liner assemblies installed across 2300 to 3300 ft of 8-1/2 inch drainhole sections. Drilling was completed with low-solids drilling fluid; well clean-up was done with a coil-tubing unit using nitrified acid at underbalance condition. In addition to a description of the design and liner completion considerations, the paper also includes a comparison of performance data from the three wells with performance of conventional wells. A productivity improvement factor of 10 or better was reported for each of the wells. 6 refs., 2 tabs., 14 figs.

Hot stuff : ultra-high temperature ESP system installed in SAGD wells

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-10-15

Ultra-temperature electrical submersible pumping (ESP) systems have been installed in steam-assisted gravity drainage (SAGD) wells for the first time at a thermal project in Christina Lake, Alberta. The Centrilift XP ESP production system that is being field tested can operate at fluid temperatures reaching 250 degrees C, higher than conventional systems, which is expected to result in an increase in production with a larger steam chamber and less viscous oil at higher steaming temperatures. The more robust system is expected to extend run life and lower operating costs. Years of research and development at specialized testing facilities went into creating the system. The unique testing facilities simulated the horizontal orientation and temperature cycling characteristics of SAGD wells and permitted the system to be tested at temperatures up to 300 degrees C. The new system is expected to lower infrastructure costs for SAGD wells that require high temperatures. 1 fig.

Detection of differentially methylated regions of irradiated fig tree selections

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Maria Gabriela Fontanetti; Soares, Murilo Racy; Gimenez, Daniele Fernanda Jovino; Fonseca, Larissa Fernanda Simielli; Torrieri, Erico; Ramos, Ester Silveira; Giuliatti, Silvana, E-mail: mariagabriela@dracena.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Dracena, SP (Brazil). Faculdade de Agricultura e Ciencias Tecnologicas; Universidade de Sao Paulo (FMRP/USP), Ribeirao Preto, SP (Brazil). Dept. de Genetica; Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Jaboticabal, SP (Brazil). Faculdade de Agricultura e Ciencias Veterinarias

2017-07-15

Fig tree (Ficus carica L.) breeding programs using conventional methods, such as directed crosses, to obtain new cultivars, are unworkable in many countries, including Brazil. Consequently, genetic breeding through mutagenesis has emerged as an important line of research that can improve this crop, and be a significant source of information about this species and assist in the implementation of propagation projects and appropriate management. The aim of this study was to verify the existence of epigenetic variability attributable to DNA methylation in irradiated fig selections when compared both to each other and to the main commercial cultivar, 'Roxo-de-Valinhos', which had previously used methylation-sensitive amplified polymorphism (MSAP) and DNA sequencing to detect the position of polymorphic regions, analyzable by bioinformatic tools. The sequencing of DNA, isolated from the differentially methylated sites, makes it possible to observe different patterns of methylation by sequencing the treated DNA with sodium bisulfite in the coding regions of regulatory genes active in the development, and fruit ripening stages. Furthermore, they have been found in the mitochondrial DNA of treatments which regulate the supply of energy in Adenosine triphosphate (ATP) form in plants. Closely related to their development, they justify the different phenotypes found in both fruit and plant growth that have suffered stress due to exposure to gamma radiation. Thus, future studies on gene expression in treatments have emerged as an extremely important strategy for understanding these complex regulatory systems, which may lead to the identification of genes of agricultural interest for the fig tree crop, and allow for manipulation and subsequent propagation of improved crops for commercial purposes. (author)

Detection of differentially methylated regions of irradiated fig tree selections

Directory of Open Access Journals (Sweden)

Maria Gabriela Fontanetti Rodrigues

Full Text Available ABSTRACT Fig tree (Ficus carica L. breeding programs using conventional methods, such as directed crosses, to obtain new cultivars, are unworkable in many countries, including Brazil. Consequently, genetic breeding through mutagenesis has emerged as an important line of research that can improve this crop, and be a significant source of information about this species and assist in the implementation of propagation projects and appropriate management. The aim of this study was to verify the existence of epigenetic variability attributable to DNA methylation in irradiated fig selections when compared both to each other and to the main commercial cultivar, “Roxo-de-Valinhos”, which had previously used methylation-sensitive amplified polymorphism (MSAP and DNA sequencing to detect the position of polymorphic regions, analyzable by bioinformatic tools. The sequencing of DNA, isolated from the differentially methylated sites, makes it possible to observe different patterns of methylation by sequencing the treated DNA with sodium bisulfite in the coding regions of regulatory genes active in the development, and fruit ripening stages. Furthermore, they have been found in the mitochondrial DNA of treatments which regulate the supply of energy in Adenosine triphosphate (ATP form in plants. Closely related to their development, they justify the different phenotypes found in both fruit and plant growth that have suffered stress due to exposure to gamma radiation. Thus, future studies on gene expression in treatments have emerged as an extremely important strategy for understanding these complex regulatory systems, which may lead to the identification of genes of agricultural interest for the fig tree crop, and allow for manipulation and subsequent propagation of improved crops for commercial purposes.

Detection of differentially methylated regions of irradiated fig tree selections

International Nuclear Information System (INIS)

Rodrigues, Maria Gabriela Fontanetti; Soares, Murilo Racy; Gimenez, Daniele Fernanda Jovino; Fonseca, Larissa Fernanda Simielli; Torrieri, Erico; Ramos, Ester Silveira; Giuliatti, Silvana; Universidade de Sao Paulo; Universidade Estadual Paulista Julio de Mesquita Filho

2017-01-01

Fig tree (Ficus carica L.) breeding programs using conventional methods, such as directed crosses, to obtain new cultivars, are unworkable in many countries, including Brazil. Consequently, genetic breeding through mutagenesis has emerged as an important line of research that can improve this crop, and be a significant source of information about this species and assist in the implementation of propagation projects and appropriate management. The aim of this study was to verify the existence of epigenetic variability attributable to DNA methylation in irradiated fig selections when compared both to each other and to the main commercial cultivar, 'Roxo-de-Valinhos', which had previously used methylation-sensitive amplified polymorphism (MSAP) and DNA sequencing to detect the position of polymorphic regions, analyzable by bioinformatic tools. The sequencing of DNA, isolated from the differentially methylated sites, makes it possible to observe different patterns of methylation by sequencing the treated DNA with sodium bisulfite in the coding regions of regulatory genes active in the development, and fruit ripening stages. Furthermore, they have been found in the mitochondrial DNA of treatments which regulate the supply of energy in Adenosine triphosphate (ATP) form in plants. Closely related to their development, they justify the different phenotypes found in both fruit and plant growth that have suffered stress due to exposure to gamma radiation. Thus, future studies on gene expression in treatments have emerged as an extremely important strategy for understanding these complex regulatory systems, which may lead to the identification of genes of agricultural interest for the fig tree crop, and allow for manipulation and subsequent propagation of improved crops for commercial purposes. (author)

How to be a dioecious fig: Chemical mimicry between sexes matters only when both sexes flower synchronously

Science.gov (United States)

Hossaert-McKey, M.; Proffit, M.; Soler, C. C. L.; Chen, C.; Bessière, J.-M.; Schatz, B.; Borges, R. M.

2016-01-01

In nursery pollination mutualisms, which are usually obligate interactions, olfactory attraction of pollinators by floral volatile organic compounds (VOCs) is the main step in guaranteeing partner encounter. However, mechanisms ensuring the evolutionary stability of dioecious fig–pollinator mutualisms, in which female fig trees engage in pollination by deceit resulting in zero reproductive success of pollinators that visit them, are poorly understood. In dioecious figs, individuals of each sex should be selected to produce odours that their pollinating wasps cannot distinguish, especially since pollinators have usually only one choice of a nursery during their lifetime. To test the hypothesis of intersexual chemical mimicry, VOCs emitted by pollen-receptive figs of seven dioecious species were compared using headspace collection and gas chromatography-mass spectrometry analysis. First, fig-flower scents varied significantly among species, allowing host-species recognition. Second, in species in which male and female figs are synchronous, intersexual VOC variation was not significant. However, in species where figs of both sexes flower asynchronously, intersexual variation of VOCs was detectable. Finally, with one exception, there was no sexual dimorphism in scent quantity. We show that there are two ways to use scent to be a dioecious fig based on differences in flowering synchrony between the sexes. PMID:26888579

Radiotracer investigations in oil production and water injection wells

International Nuclear Information System (INIS)

Eapen, A.C.; Jain, S.K.; Kirti

1977-01-01

Injection of gamma emitting radiotracers into oil wells followed by logging provides information on several aspects such as the identification of zones of seepage of water in the water injection wells and also the location of source of water entering oil producting wells. The experience gained in the application of bromine-82 and rubidium-86 as radiotracers in such studies at the Ankleshwar and Kalol oil fields in Gujarat and Nazira in Assam has been briefly reported. (author)

Examining relationships between multiple health risk behaviors, well-being, and productivity.

Science.gov (United States)

Evers, Kerry E; Castle, Patricia H; Prochaska, James O; Prochaska, Janice M

2014-06-01

Traditionally, the concept of health promotion has emphasized the reduction of health risk behaviors to reduce disease and impairment. Well-being research expands this focus to include positive constructs such as thriving, productivity, life-evaluation, and emotional and physical health. The objective of the present study was to examine the relationships between health risk behaviors and specific measures of individual well-being. Participants (N = 790) from 49 states completed a one-time online assessment that included the Life-Evaluation Index, Emotional and Physical Health Ladders, the Health Risk Intervention Assessment, and the Work Productivity and Activity Improvement Questionnaire for General Health. Life Evaluation and physical and emotional health were all inversely related to the number of health risk behaviors, with higher well-being scores associated with lower number of risk behaviors. Across the three Life Evaluation categories (Suffering, Struggling, and Thriving) the number of health risk behaviors decreased, productivity loss decreased, and emotional and physical health increased. The results add to previous research on how reducing multiple health risk behaviors can be combined with well-being, i.e., an emphasis on increasing life-evaluation, emotional and physical health, better functioning, and productivity.

Optimum development of a thin box-shaped reservoir with multiply fractured horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Lietard, O.; Hegeman, P.

1998-12-31

An improved definition of the productivity index of multiply fractured wells is proposed, based on the use of Dietz`s shape factors for vertical wells centered in independent box-shaped drainage areas of equal size in a reservoir. Pseudo-radial flow around each fracture is taken into account and pressure drops in the reservoir are accurately estimated. By using the corrected Gringarten mathematical approach, it is confirmed that orthogonal fractures provide much better productivity than a single collinear fracture even at constant material usage. Up to five-fold improvements have been registered when the number of fractures was equal to 1.8 times the reservoir shape ratio (length over width). For best results, the well should be cased and cemented, and hydraulic fractures should be propagated one by one through short perforation clusters. 18 refs., 10 figs., 1 appendix.

Production chain of CMS pixel modules

CERN Multimedia

2006-01-01

The pictures show the production chain of pixel modules for the CMS detector. Fig.1: overview of the assembly procedure. Fig.2: bump bonding with ReadOut Chip (ROC) connected to the sensor. Fig.3: glueing a raw module onto the baseplate strips. Fig.4: glueing of the High Density Interconnect (HDI) onto a raw module. Fig.5: pull test after heat reflow. Fig.6: wafer sensor processing, Indium evaporation.

Successful flank appraisal with a horizontal well: a Niger Delta example

Energy Technology Data Exchange (ETDEWEB)

Ohanele, C.; Emelumadu, U.

1998-12-31

Case study of a horizontal well successfully drilled in 1994 by Shell Oil in the Niger Delta is described. The well was drilled with the objectives of improving drainage of the major D3.1 reservoir and appraising the poorly defined eastern flank for structure and fluid content of the overlying D3.0 sand. The well was optimized by 3D reservoir and hydrocarbon modeling of these reservoirs. Combining the development and appraisal objectives in one horizontal well proved to be the optimal solution, both from a cost as well as a production consideration. The well proved up over 50 MMstb of additional reserves. The structural flank proved to be significantly shallower than previously mapped and had a positive effect not only on the D3.0 reserves, but also on the the D3.1. 6 figs.

Spatial Scales of Genetic Structure in Free-Standing and Strangler Figs (Ficus, Moraceae Inhabiting Neotropical Forests.

Directory of Open Access Journals (Sweden)

Katrin Heer

Full Text Available Wind-borne pollinating wasps (Agaonidae can transport fig (Ficus sp., Moraceae pollen over enormous distances (> 100 km. Because of their extensive breeding areas, Neotropical figs are expected to exhibit weak patterns of genetic structure at local and regional scales. We evaluated genetic structure at the regional to continental scale (Panama, Costa Rica, and Peru for the free-standing fig species Ficus insipida. Genetic differentiation was detected only at distances > 300 km (Jost´s Dest = 0.68 ± 0.07 & FST = 0.30 ± 0.03 between Mesoamerican and Amazonian sites and evidence for phylogeographic structure (RST>>permuted RST was only significant in comparisons between Central and South America. Further, we assessed local scale spatial genetic structure (SGS, d ≤ 8 km in Panama and developed an agent-based model parameterized with data from F. insipida to estimate minimum pollination distances, which determine the contribution of pollen dispersal on SGS. The local scale data for F. insipida was compared to SGS data collected for an additional free-standing fig, F. yoponensis (subgenus Pharmacosycea, and two species of strangler figs, F. citrifolia and F. obtusifolia (subgenus Urostigma sampled in Panama. All four species displayed significant SGS (mean Sp = 0.014 ± 0.012. Model simulations indicated that most pollination events likely occur at distances > > 1 km, largely ruling out spatially limited pollen dispersal as the determinant of SGS in F. insipida and, by extension, the other fig species. Our results are consistent with the view that Ficus develops fine-scale SGS primarily as a result of localized seed dispersal and/or clumped seedling establishment despite extensive long-distance pollen dispersal. We discuss several ecological and life history factors that could have species- or subgenus-specific impacts on the genetic structure of Neotropical figs.

Improving animal productivity by nuclear techniques

International Nuclear Information System (INIS)

Garcia, M.; Jayasuriya, M.C.N.; Perera, B.M.A.O.

1995-01-01

The IAEA and FAO have run a joint programme for 30 years to assist national agricultural research systems in member states to develop, test and apply nuclear and related techniques for improving the productivity of livestock. Applications of nuclear technologies for improving livestock productivity include: use of radioimmunoassay in animal nutrition researches, animal production, and evaluating feeding and management systems through reproductive performance in a field. Geographic coverage and the type of livestock studies are: grazing animals (cattle, goats and sheep) in Africa, Latin America and Asia, as well as buffalo production in Asia. 6 refs, 8 figs, 6 tabs

Pectinesterase inhibitor from jelly-fig (Ficus awkeotsang Makino) achenes reduces methanol content in carambola wine.

Science.gov (United States)

Wu, James Swi-Bea; Wu, Ming-Chang; Jiang, Chii-Ming; Hwang, Ya-Ping; Shen, Szu-Chuan; Chang, Hung-Min

2005-11-30

Crude pectinesterase (PE) inhibitor (PEI) extracted from jelly-fig achenes (JFA) (Ficus awakeosang Makino) was added to carambola (Averrhoa carambola L.) puree to determine the change in methanol production during fermentation. Addition of pectin or microbial pectic enzyme to puree increased dose-dependently the methanol content in fermented products. Decreasing ratio (from 1:0 to 1:19, v:v) of pectic enzyme to diluted crude PEI solution in the puree-enzyme mixture decreased the PE activity remarkably. Except for transmittance (%T), addition of crude PEI to puree did not affect apparently the physical and chemical properties of wine; however, it reduced methanol content in the control from 256 to 58 ppm. The degree of esterification (DE) of pectin in starting puree was approximately 70%. It decreased to approximately 27% in the control group and reduced slightly to approximately 67% in fermented puree with crude PEI added after 14 days of fermentation. This reveals that crude PEI solution was potent in inhibiting intrinsic carambola PE activity and appeared to be a potential alternative for methanol reduction in wines.

Electrophoretic Ink Display Prepared by Jelly Fig Pectin/Gelatin Microspheres

Directory of Open Access Journals (Sweden)

Wing-Ming Chou

2015-05-01

Full Text Available A brand new Bio-Electronic ink (Bio-E ink display device was prepared and characterized in this study. Semiconductor material, copper phthalocyanine (CuPc was modified by cationic surfactants, cetylpyridinium chloride (CPC, as the core material, and the shell of capsule was prepared by jelly fig pectin, gelatin and sodium dodecyl sulphate (SDS. Here, jelly fig pectin was provided as the shell material for the first time. Chemical structure of the modified CuPc was characterized by Fourier Transform Infrared Spectrometer (FTIR. The core-shell microcapsules were achieved by coacervation method in an oil/water (O/W emulsion system. The particle size and morphology of microcapsules were affected by the concentrations of SDS and pH values of the O/W emulsion system. A new microcapsule-based electrophoretic display device was presented. Its image display ability of the microcapsules electrophoretic device was presented as appropriated electric power was applied, and the response time was 0.06 sec under 0.1 V/mm of electric field. Moreover, we found that its image contrast ratio of display device was influenced by the particle sizes of the microcapsules.

Fig: ure it Out: A Creative Psychoanalysis

Directory of Open Access Journals (Sweden)

Neil Murphy

2010-09-01

Full Text Available Sigmund Freud’s contribution to the field of psychology was significant, not because it was flawless but because it challenged conventional views of the time.   In the modern era, an individual’s view of the world is constantly being challenged due, in large part, to insurmountable information made available for public consumption. It’s an unrelenting bombardment of input that has made prominent the rift between facts and beliefs. This inquisitive article is an exploration of that conflict.   By applying Freudian psychology to one of the most confrontational and debatable topics of the 21st century—the environment—Fig: ure It Out reviews our environmental problems from one psychological perspective. Do we define truths by facts or by the way in which we cope with new information? It’s an example of human behaviour within a changing world.

Metatranscriptome Analysis of Fig Flowers Provides Insights into Potential Mechanisms for Mutualism Stability and Gall Induction.

Directory of Open Access Journals (Sweden)

Ellen O Martinson

Full Text Available A striking property of the mutualism between figs and their pollinating wasps is that wasps consistently oviposit in the inner flowers of the fig syconium, which develop into galls that house developing larvae. Wasps typically do not use the outer ring of flowers, which develop into seeds. To better understand differences between gall and seed flowers, we used a metatranscriptomic approach to analyze eukaryotic gene expression within fig flowers at the time of oviposition choice and early gall development. Consistent with the unbeatable seed hypothesis, we found significant differences in gene expression between gall- and seed flowers in receptive syconia prior to oviposition. In particular, transcripts assigned to flavonoids and carbohydrate metabolism were significantly up-regulated in gall flowers relative to seed flowers. In response to oviposition, gall flowers significantly up-regulated the expression of chalcone synthase, which previously has been connected to gall formation in other plants. We propose several genes encoding proteins with signal peptides or associations with venom of other Hymenoptera as candidate genes for gall initiation or growth. This study simultaneously evaluates the gene expression profile of both mutualistic partners in a plant-insect mutualism and provides insight into a possible stability mechanism in the ancient fig-fig wasp association.

Tissue-Specific Transcriptome and Hormonal Regulation of Pollinated and Parthenocarpic Fig (Ficus carica L. Fruit Suggest that Fruit Ripening is Coordinated by the Reproductive Part of the Syconium

Directory of Open Access Journals (Sweden)

Yogev Rosianski

2016-11-01

Full Text Available In the unconventional climacteric fig (Ficus carica fruit, pollinated and parthenocarpic fruit of the same genotype exhibit different ripening characteristics. Integrative comparative analyses of tissue-specific transcript and of hormone levels during fruit repining from pollinated vs. parthenocarpic fig fruit were employed to unravel the similarities and differences in their regulatory processes during fruit repining. Assembling tissue-specific transcripts into 147,000 transcripts with 53,000 annotated genes provided new insights into the spatial distribution of many classes of regulatory and structural genes, including those related to color, taste and aroma, storage, protein degradation, seeds and embryos, chlorophyll, and hormones. Comparison of the pollinated and parthenocarpic tissues during fruit ripening showed differential gene expression, especially in the fruit inflorescence. The distinct physiological green phase II and ripening phase III differed significantly in their gene-transcript patterns in both pulp and inflorescence tissues. Gas chromatographic analysis of whole fruits enabled the first determination of ripening-related hormone levels from pollinated and non-pollinated figs. Ethylene and auxin both increased during fruit ripening, irrespective of pollination, whereas no production of active gibberellins or cytokinins was found in parthenocarpic or pollinated ripening fruit. Tissue-specific transcriptome revealed apparent different metabolic gene patterns for ethylene, auxin and ABA in pollinated vs. parthenocarpic fruit, mostly in the fruit inflorescence. Our results demonstrate that the production of abscisic acid (ABA, non-active ABA–GE conjugate and non-active indoleacetic acid (IAA–Asp conjugate in pollinated fruits is much higher than in parthenocarpic fruits. We suggest that fruit ripening is coordinated by the reproductive part of the syconium and the differences in ABA production between pollinated and

Red barons or robber barons? : governance and financing in Russian FIGS

NARCIS (Netherlands)

Perotti, E.C.; Gelfer, S.

1999-01-01

We study the governance role of Russian Financial-Industrial Groups (FIG) and their impact on financing of investment. We compare member firms of a group with a control set of large firms categorized by dispersed ownership or/and management and employee control. We find that investment is sensitive

A study of electrolytic tritium production

International Nuclear Information System (INIS)

Storms, E.K.; Talcott, C.L.

1990-01-01

Tritium production is being investigated using cathodes made from palladium and its alloys with various surface treatments. Three anode materials have been studied as well as different impurities in the electrolyte. Tritium has been produced in about 10% of the cells studied but there is, as yet, no pattern of behavior that would make the effect predictable. 15 refs., 4 figs., 6 tabs

A Semi-Analytical Methodology for Multiwell Productivity Index of Well-Industry-Production-Scheme in Tight Oil Reservoirs

Directory of Open Access Journals (Sweden)

Guangfeng Liu

2018-04-01

Full Text Available Recently, the well-industry-production-scheme (WIPS has attracted more and more attention to improve tight oil recovery. However, multi-well pressure interference (MWPI induced by well-industry-production-scheme (WIPS strongly challenges the traditional transient pressure analysis methods, which focus on single multi-fractured horizontal wells (SMFHWs without MWPI. Therefore, a semi-analytical methodology for multiwell productivity index (MPI was proposed to study well performance of WIPS scheme in tight reservoir. To facilitate methodology development, the conceptual models of tight formation and WIPS scheme were firstly described. Secondly, seepage models of tight reservoir and hydraulic fractures (HFs were sequentially established and then dynamically coupled. Numerical simulation was utilized to validate our model. Finally, identification of flow regimes and sensitivity analysis were conducted. Our results showed that there was good agreement between our proposed model and numerical simulation; moreover, our approach also gave promising calculation speed over numerical simulation. Some expected flow regimes were significantly distorted due to WIPS. The slope of type curves which characterize the linear or bi-linear flow regime is bigger than 0.5 or 0.25. The horizontal line which characterize radial flow regime is also bigger 0.5. The smaller the oil rate, the more severely flow regimes were distorted. Well rate mainly determines the distortion of MPI curves, while fracture length, well spacing, fracture spacing mainly determine when the distortion of the MPI curves occurs. The bigger the well rate, the more severely the MPI curves are distorted. While as the well spacing decreases, fracture length increases, fracture spacing increases, occurrence of MWPI become earlier. Stress sensitivity coefficient mainly affects the MPI at the formation pseudo-radial flow stage, almost has no influence on the occurrence of MWPI. This work gains some

Numerical investigation on hydraulic fracture cleanup and its impact on the productivity of a gas well with a non-Newtonian fluid model

Energy Technology Data Exchange (ETDEWEB)

Friedel, T. [Schlumberger Data and Consulting Services, Sugar Land, TX (United States)

2006-07-01

There are many damage mechanisms associated with hydraulically fractured gas wells. These include hydraulic damage caused by invading fluids during the treatment and damage due to the stresses exerted on the fracture face. Damage to the proppant pack can also reduce conductivity and non-Darcy flow. However, these are not the only impacts of impaired productivity in tight-gas reservoirs, which do not respond to hydraulic fracturing as expected. Some sustain a flat production profile or show only a slow increase in production rate for several weeks or months. This is due to poor rock quality, strong stress dependency in permeability, hydraulic and mechanical damage. Another reason for the poor performance is related to the cleanup of the cross-linked fracturing fluid with its non-Newtonian characteristics. This paper presented an improved 3-phase cleanup model for the investigation of polymer gel cleanup. Yield stress was considered according to the Herschel-Bulkley rheology model. The viscosity model is based on the exact analytical solution, including the plug flow zone. According to data in the published literature, half of the gel phase can be recovered. The gel saturation gradually increases towards the fracture tips, thereby lowering the fracture conductivities. The residing gel damages the permeability and porosity of the proppant pack or causes damage to the fracture face, thereby reducing production potential. These results are in agreement with field observations where fracture half-lengths, conductivities and productivity are also lower than expected. Preliminary results suggest that capillary forces and load-water recovery have little influence on gel cleanup. 16 refs., 2 tabs., 17 figs.

Ficus religiosa L. (English: Peepal tree or sacred fig; Hindi: Pippal ...

Indian Academy of Sciences (India)

Fruits are fig-like, globose, small and purplish when ripe. The bark is astringent, sweet, aphrodisiac and the aqueous extract of it is antibacterial. Leaves and tender shoots are recommended for wounds and skin diseases. Pulverised dried fruit taken in water cures asthma. The latex is good for neuralgia, inflammations and ...

Simulation of a SAGD well blowout using a reservoir-wellbore coupled simulator

Energy Technology Data Exchange (ETDEWEB)

Walter, J.; Vanegas, P.; Cunha, L.B. [Alberta Univ., Edmonton, AB (Canada); Worth, D.J. [C-FER Technologies, Edmonton, AB (Canada); Crepin, S. [Petrocedeno, Caracas (Venezuela)

2008-10-15

Single barrier completion systems are typically used in SAGD projects due to the lack of equipment suitable for high temperature SAGD downhole environments. This study used a wellbore and reservoir coupled thermal simulator tool to investigate the blowout behaviour of a steam assisted gravity drainage (SAGD) well pair when the safety barrier has failed. Fluid flow pressure drop through the wellbore and heat losses between the wellbore and the reservoir were modelled using a discretized wellbore option and a semi-analytical model. The fully coupled mechanistic model accounted for the simultaneous transient pressure and temperature variations along the wellbore and the reservoir. The simulations were used to predict flowing potential and fluid compositions of both wells in a SAGD well pair under various flowing conditions. Blowout scenarios were created for 3 different points in the well pair's life. Three flow paths during the blowout were evaluated for both the production and injection wells. Results of the study were used to conduct a comparative risk assessment between a double barrier and a single barrier completion. The modelling study confirmed that both the injection and production wells had the potential for blowouts lasting significant periods of time, with liquid rates over 50 times the normal production liquid rates. The model successfully predicted the blowout flow potential of the SAGD well pairs. 8 refs., 3 tabs., 18 figs.

Productivity assessment of an opencast coal mine: a case study

Energy Technology Data Exchange (ETDEWEB)

Yadav, M.K.; Bhar, C. [Indian School of Mines, Dhanbad (India). Dept. of Management Studies

2006-07-01

An assessment was conducted at an opencast coalmine located in Jharia coalfield. The mine is using shovel-dumper combination for winning coal. The study covers the computation of partial productivities as well as total productivity status of the mine at an aggregate level whereas partial productivities highlight the efficiency in the use of various resources. A statistical analysis among the different productivity indices has been carried out to identify the criticality of different input factors. Accordingly appropriate strategies can be devised for improving productivity of the mine. 2 figs., 6 tabs.

Production of natural gas from methane hydrate by a constant downhole pressure well

International Nuclear Information System (INIS)

Ahmadi, Goodarz; Ji, Chuang; Smith, Duane H.

2007-01-01

Natural gas production from the dissociation of methane hydrate in a confined reservoir by a depressurizing downhole well was studied. The case that the well pressure was kept constant was treated, and two different linearization schemes in an axisymmetric configuration were used in the analysis. For different fixed well pressures and reservoir temperatures, approximate self similar solutions were obtained. Distributions of temperature, pressure and gas velocity field across the reservoir were evaluated. The distance of the decomposition front from the well and the natural gas production rate as functions of time were also computed. Time evolutions of the resulting profiles were presented in graphical forms, and their differences with the constant well output results were studied. It was shown that the gas production rate was a sensitive function of well pressure and reservoir temperature. The sensitivity of the results to the linearization scheme used was also studied

LOW COST METHODOLOGIES TO ANALYZE AND CORRECT ABNORMAL PRODUCTION DECLINE IN STRIPPER GAS WELLS

International Nuclear Information System (INIS)

Jerry James; Gene Huck; Tim Knobloch

2001-01-01

A study group of 376 Clinton Sand wells in Ohio provided data to determine the historic frequency of the problem of abnormal production declines in stripper gas wells and the causes of the abnormal production decline. Analysis of the historic frequency of the problem indicates over 70% of the wells experienced abnormal production decline. The most frequently occurring causes of abnormal production declines were determined to be fluid accumulation (46%), gas gathering restrictions (24%), and mechanical failures (23%). Data collection forms and decision trees were developed to cost-effectively diagnose the abnormal production declines and suggest corrective action. The decision trees and data collection sheets were incorporated into a procedure guide to provide stripper gas well operators with a methodology to analyze and correct abnormal production declines. The systematic methodologies and techniques developed should increase the efficiency of problem well assessment and implementation of solutions for stripper gas wells. This eight quarterly technical progress report provides a summary of the deliverables completed to date, including the results of the remediations, the procedure guide, and the technology transfer. Due to the successful results of the study to date and the efficiency of the methodology development, two to three additional wells will be selected for remediation for inclusion into the study. The results of the additional remediations will be included in the final report

Heavy quark production in ep collisions at HERA

International Nuclear Information System (INIS)

Derrick, M.

1987-01-01

There are substantial production rates of heavy quarks from ep collisions at HERA. The center of mass energy of about 300 GeV is well above any b-quark threshold effects, and for b/bar b/ production, the cross section is estimated to be 3.3 nb per event, leading to rates approaching 10 6 b mesons per year. The rates for c/bar c/ production are about two orders of magnitude greater. Two major detectors are under construction and a program of heavy quark physics will start in 1990. 3 refs., 4 figs

Performance of casings in Cerro Prieto production wells

Energy Technology Data Exchange (ETDEWEB)

Dominguez A, B.; Vital B, F.; Bermejo M, F.; Sanchez G, G.

1981-01-01

A careful evaluation of different production casings used at Cerro Prieto from 1964 to date has shown that the following casings have yielded particularly impressive results: 7 5/8-in. diameter, J-55, 26 lb/ft; 7 5/8-in. diameter, K-55, 45.3 lb/ft; and 5-in. diameter, K-55, 23.2 lb/ft. These casings differ from others of the same diameter but lighter weight which were also used at the field. The results are favorable in spite of severe construction problems, especially the loss of circulation during cementing operations, which we encountered in some of the wells where these casings were used. The use of gravity-fed fine sand as packing material and the arrangement of the production and intermediate casings were important in avoiding damage due to tension-compression stresses and, above all, damage due to internal or external corrosion over time. This situation is clearly evidenced if we compare the damage to the above casings with that experienced by grade N-80 production casings, especially in a corrosive environment.

Surveying and analyzing injection responses for patterns with horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Fedenczuk, L.; Hoffman, K.

1998-12-31

A novel method for visualizing injection responses in patterns that include horizontal and/or vertical wells is described. Understanding fluid communication between the horizontal well and the surrounding injectors is essential to estimating the effectiveness of the waterflood. Armed with the understanding of responses, injection patterns can be optimized, production rates can be increased and more efficient oil recovery can be achieved. In this study the time lags of correlations and a new parameter, the waterflood response type is introduced. The response type is based on the oil and total fluid responses. In addition spider diagrams are introduced to help visualizing the correlations, time lags and response types. Integration of the results with geology, petrophysics and completion techniques can help to find the cause and effect rules in waterflood fields. 6 refs., 10 figs.

Pair production in small angle Bhabha scattering

International Nuclear Information System (INIS)

Arbuzov, A.B.; Kuraev, Eh.A.; Merenkov, N.P.; Trentadue, L.

1995-01-01

The radiative corrections due to a pair production in the small angle high energy e + e - Bhabha scattering are considered. The corrections due to the production of virtual pairs as well as real soft and hard ones are calculated analytically. The collinear and semi-collinear kinematical regions of the hard pair production are taken into account. The results in the leading and next-to-leading logarithmic approximations provide the accuracy of Ο (0.1%). The results of numerical calculations show that the effects of pairs production are to be taken into account in the precise luminosity determination at LEP. 9 refs., 3 figs., 2 tabs

75 FR 6344 - Notice of Availability of Pest Risk Analyses for Importation of Fresh Figs, Pomegranates, and...

Science.gov (United States)

2010-02-09

...] Notice of Availability of Pest Risk Analyses for Importation of Fresh Figs, Pomegranates, and Baby Kiwi...: Notice. SUMMARY: We are advising the public that we have prepared two pest risk analyses, one with... the risks of introducing or disseminating plant pests or noxious weeds via the importation of figs...

Phylogenetic analyses suggest a hybrid origin of the figs (Moraceae: Ficus) that are endemic to the Ogasawara (Bonin) Islands, Japan.

Science.gov (United States)

Kusumi, Junko; Azuma, Hiroshi; Tzeng, Hsy-Yu; Chou, Lien-Siang; Peng, Yan-Qiong; Nakamura, Keiko; Su, Zhi-Hui

2012-04-01

The Ogasawara Islands are oceanic islands and harbor a unique endemic flora. There are three fig species (Ficus boninsimae, F. nishimurae and F. iidaiana) endemic to the Ogasawara Islands, and these species have been considered to be closely related to Ficus erecta, and to have diverged within the islands. However, this hypothesis remains uncertain. To investigate this issue, we assessed the phylogenetic relationships of the Ogasawara figs and their close relatives occurring in Japan, Taiwan and South China based on six plastid genome regions, nuclear ITS region and two nuclear genes. The plastid genome-based tree indicated a close relationship between the Ogasawara figs and F. erecta, whereas some of the nuclear gene-based trees suggested this relationship was not so close. In addition, the phylogenetic analyses of the pollinating wasps associated with these fig species based on the nuclear 28S rRNA and mitochondrial cytB genes suggested that the fig-pollinating wasps of F. erecta are not sister to those of the Ogasawara figs These results suggest the occurrence of an early hybridization event(s) in the lineage leading to the Ogasawara figs. Copyright © 2012 Elsevier Inc. All rights reserved.

Production Well Performance Enhancement using Sonication Technology

Energy Technology Data Exchange (ETDEWEB)

Adewumi, Michael A; Ityokumbul, M Thaddeus; Watson, Robert W; Eltohami, Eltohami; Farias, Mario; Heckman, Glenn; Houlihan, Brendan; Karoor, Samata Prakash; Miller, Bruce G; Mohammed, Nazia; Olanrewaju, Johnson; Ozdemir, Mine; Rejepov, Dautmamed; Sadegh, Abdallah A; Quammie, Kevin E; Zaghloul, Jose; Hughes, W Jack; Montgomery, Thomas C

2005-12-31

-up purposes was limited due to funding constraints. The overall plan for this task was to perlorm field trials with the sonication tooL These trials were to be performed in production and/or injection wells located in Pennsylvania, New York, and West Virginia. Four new wells were drilled in preparation for the field demonstration. Baseline production data were collected and reservoir simulator tuned to simulate these oil reservoirs. The sonication tools were designed for these wells. However, actual field testing could not be carried out because of premature termination of the project.

Nonlinear flow model for well production in an underground formation

Directory of Open Access Journals (Sweden)

J. C. Guo

2013-05-01

Full Text Available Fluid flow in underground formations is a nonlinear process. In this article we modelled the nonlinear transient flow behaviour of well production in an underground formation. Based on Darcy's law and material balance equations, we used quadratic pressure gradients to deduce diffusion equations and discuss the origins of nonlinear flow issues. By introducing an effective-well-radius approach that considers skin factor, we established a nonlinear flow model for both gas and liquid (oil or water. The liquid flow model was solved using a semi-analytical method, while the gas flow model was solved using numerical simulations because the diffusion equation of gas flow is a stealth function of pressure. For liquid flow, a series of standard log-log type curves of pressure transients were plotted and nonlinear transient flow characteristics were analyzed. Qualitative and quantitative analyses were used to compare the solutions of the linear and nonlinear models. The effect of nonlinearity upon pressure transients should not be ignored. For gas flow, pressure transients were simulated and compared with oil flow under the same formation and well conditions, resulting in the conclusion that, under the same volume rate production, oil wells demand larger pressure drops than gas wells. Comparisons between theoretical data and field data show that nonlinear models will describe fluid flow in underground formations realistically and accurately.

Productivity Analysis of Volume Fractured Vertical Well Model in Tight Oil Reservoirs

Directory of Open Access Journals (Sweden)

Jiahang Wang

2017-01-01

Full Text Available This paper presents a semianalytical model to simulate the productivity of a volume fractured vertical well in tight oil reservoirs. In the proposed model, the reservoir is a composite system which contains two regions. The inner region is described as formation with finite conductivity hydraulic fracture network and the flow in fracture is assumed to be linear, while the outer region is simulated by the classical Warren-Root model where radial flow is applied. The transient rate is calculated, and flow patterns and characteristic flowing periods caused by volume fractured vertical well are analyzed. Combining the calculated results with actual production data at the decline stage shows a good fitting performance. Finally, the effects of some sensitive parameters on the type curves are also analyzed extensively. The results demonstrate that the effect of fracture length is more obvious than that of fracture conductivity on improving production in tight oil reservoirs. When the length and conductivity of main fracture are constant, the contribution of stimulated reservoir volume (SRV to the cumulative oil production is not obvious. When the SRV is constant, the length of fracture should also be increased so as to improve the fracture penetration and well production.

Cattle manure fertilization increases fig yield Adubação com esterco de curral na produção da figueira

Directory of Open Access Journals (Sweden)

Sarita Leonel

2009-12-01

Full Text Available Fertilization using organic compounds is complementary to chemical fertilization, being essential to integrated fruit production. Reports on fig tree (Ficus carica L. organic fertilization and mineral nutrition are worldwide scarce, especially in Brazil. This experiment aimed to evaluate the effects of cattle manure fertilization on the yield and productivity of the fig tree 'Roxo de Valinhos' in Botucatu, São Paulo State, Brazil, during the 2002/03, 2003/04, 2004/05 and 2005/06 crop cycles. Plants aged one, two, three and four year olds received the following cattle manure treatments: control (no fertilizer, 25%, 50%, 75%, 100%, 125% and 150% of the recommended N level for this crop. The evaluated variables were: fruit number, weight and mean diameter, plant yield and productivity. The application of cattle manure increased productivity, yield and fruit number, slightly affecting fruit dimensions. After four years of cattle manure application, the best results were obtained with 76 to 124% of the N level recommended for the fig crop.A adubação com compostos orgânicos é complementar à adubação química e especialmente necessária para a produção integrada de frutas. Trabalhos de pesquisa com adubação orgânica e nutrição mineral da figueira (Ficus carica L. são escassos em todo o mundo e particularmente, no Brasil. O experimento teve como objetivo avaliar os efeitos da adubação orgânica com esterco de curral na produção e produtividade da figueira 'Roxo de Valinhos' em Botucatu-SP, nos ciclos de produção de 2002/03, 2003/04, 2004/05 e 2005/06. As plantas com idade de um, dois, três e quatro anos receberam os tratamentos com doses de esterco de curral correspondentes a: testemunha (sem adubação, 25%, 50%, 75%, 100%, 125% e 150% da dose recomendada de N para a cultura. As variáveis avaliadas foram número, peso e diâmetro médio dos frutos, produção por planta e produtividade. A aplicação de esterco de curral

Innovations for production optimization in the petroleum industry: conference reports

International Nuclear Information System (INIS)

Anon.

1997-01-01

This Insight conference was held to review the methods by which the petroleum industry could optimize production. Presentations from nine guest speakers were included. The issues addressed included the use of computer software for integrated data systems such as SCADA and GIS, the use of remote sensing and real-time systems to monitor well production and reserves capability more effectively, and innovations to minimize finding and development costs and their effect on financial markets. figs

Design for Health and Well Being: Knitted Products for Diabetics

Science.gov (United States)

Gault, A.

2016-07-01

This paper will discuss the design development, manufacturing and testing of knitted products maximizing the use of new innovations in Nano- technology and the integration of Phase Changing Materials specifically for diabetics. The project identified key aspects requiring design solutions to bring improvement to the circulatory problems with specific reference to the diabetic condition. Diabetics have particular difficulty in regulating their body temperature and this can result in the condition worsening, and resulting in loss of digits or limbs. The design of products to prevent the deterioration of the diabetic condition and to help those with limb loss was developed in collaboration with a Northern Ireland diabetic consultant, a product engineer and a knitwear designer. The fusion of ideas between the stakeholders resulted in the development and manufacture of a range of products that have been successfully tested at the yarn and fabric development stage and have been proven to maintain body temperature by either cooling or warming and therefore bring improvement to health and well-being. Whilst the product has a performance element the design ideas created desirable products that not only provided solutions to the brief but also resulted in products that had further market applications.

Sharing risk and reward - floating production contractorship

International Nuclear Information System (INIS)

Gisvold, K.M.

1994-01-01

The conference paper summarizes the contractual experience so far gained on Petrojarl 1 floating production system and the associated shuttling services on the Norwegian continental shelf. The paper attempts to draw some lines into the future with respect to development of the business format and the evolution of the relationship between the contractor and the various oil companies in question. Turnkey production services as well as transport and project services to the oil industry are provided. The scope of these services ranges from top of the sea bed wellhead to quayside at the refinery, and is based on ownership control of the employed vessels as well as complete manning of all services. 7 figs

Nationwide rural well water survey

International Nuclear Information System (INIS)

Korkka-Niemi, K.; Sipilae, A.; Hatva, T.; Hiisvirta, L.; Lahti, K.; Alfthan, G.

1993-01-01

The quality of water in 1 421 drinking-water wells was monitored in a nationwide well water study. Samples were taken once from all wells, and during three seasons from 421 wells. The wells were selected in such a way that me sample would be as representative as possible of the quality of the drinking-water in households' own wells in rural areas. The study comprised general water quality parameters, influence of sampling season, and factors related to the type, the condition and the pollution of the wells. In part of the well waters selenium, radioactivity and pesticides were determined. The effect of plumbing materials on the quality of water was also examined. (33 refs., 148 figs., 71 tabs.)

Papers of the PTAC wireless, telecommunications and e-business forum : using wireless, SCADA, and well data life cycle management technology to boost productivity and reduce costs in the upstream oil and gas industry

International Nuclear Information System (INIS)

2004-01-01

The main focus of this forum was the use of wireless, telecommunications and e-business as a means of improving efficiency and productivity in the upstream oil and gas industry. The use of new communications technologies in asset monitoring and business performance was discussed, as well as industrial automation and wireless connectivity in conjunction with Supervisory Control and Data Acquisition (SCADA) systems. New technologies in the areas of maintenance and decision support and synergy integration were introduced. New health, safety and environmental performance tools were presented. Issues concerning secure communications and document exchange expenses were also introduced, as well as different methods of closing data gaps between joint interest partners. Specific tools and software concerning compliance management with web-based and remote field data capture technology were discussed, as well as the collection and display of well-site data using newly developed BlueGauge technology. Eleven papers were presented in this forum, of which three were catalogued separately for inclusion in this database. tabs., figs

Papers of the PTAC wireless, telecommunications and e-business forum : using wireless, SCADA, and well data life cycle management technology to boost productivity and reduce costs in the upstream oil and gas industry

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The main focus of this forum was the use of wireless, telecommunications and e-business as a means of improving efficiency and productivity in the upstream oil and gas industry. The use of new communications technologies in asset monitoring and business performance was discussed, as well as industrial automation and wireless connectivity in conjunction with Supervisory Control and Data Acquisition (SCADA) systems. New technologies in the areas of maintenance and decision support and synergy integration were introduced. New health, safety and environmental performance tools were presented. Issues concerning secure communications and document exchange expenses were also introduced, as well as different methods of closing data gaps between joint interest partners. Specific tools and software concerning compliance management with web-based and remote field data capture technology were discussed, as well as the collection and display of well-site data using newly developed BlueGauge technology. Eleven papers were presented in this forum, of which three were catalogued separately for inclusion in this database. tabs., figs.

DNA profiling of figs (Ficus carica L.) from Slovenia and Californian USDA collection revealed the uniqueness of some North Adriatic varieties

Science.gov (United States)

A set of 23 local varieties from Slovenia and 218 fig accessions from Californian fig germplasm collection were compared to determine the identity of genotypes and their possible genetic relationships. Figs were genotyped using twelve microsatellite loci. One hundred alleles were identified over all...

A new flooding scheme by horizontal well in thin heavy oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Liu, H.; Zhang, H.; Wang, M. [China Univ. of Petroleum, Beijing (China). MOE Key Laboratory of Petroleum Engineering ; Wang, Z. [Shengli Oil Field Co. (China). Dept. of Science and Technology]|[SINOPEC, Shengli (China)

2008-10-15

This paper presented a new flooding scheme for single horizontal wells that could improve recovery from thin marginal heavy oil reservoirs or from offshore reservoirs. The scheme involved the use of a multiple tubing string completion in a single wellbore. Special packers were installed within the long completion horizontal interval to establish an injection zone and a production zone. The new flooding scheme also involved simultaneous injection and production. Numerical simulation of the reservoir was used to determine the thickness of the formation and the lower limitation for different viscosities and the optimum time to start steam flooding after steam soaking by economic oil/steam ratio. The peak recovery efficiency of steam flooding was shown to occur when the length of separation section ratio is 0.15 to 0.2. It was concluded that high thermal efficiency in horizontal wells with long completion intervals can be maintained by alternating between steam soaking and steam flooding. Suitable alternation time to steam flooding is a seventh cycle for horizontal wells. Water cut and pressure difference will increase the steam injection rate, and thereby improve the oil production rate. The suitable injection rate for steam flooding is 2.4 t/d.ha.h because of its slow pressure change. 11 refs., 7 figs.

30 CFR 250.195 - What notification does MMS require on the production status of wells?

Science.gov (United States)

2010-07-01

... the well in a production status. You must confirm oral notification by telefax or e-mail within those... production status of wells? 250.195 Section 250.195 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT... Information and Reporting Requirements § 250.195 What notification does MMS require on the production status...

Variability of oil and gas well productivities for continuous (unconventional) petroleum accumulations

Science.gov (United States)

Charpentier, Ronald R.; Cook, Troy A.

2013-01-01

Over the last decade, oil and gas well productivities were estimated using decline-curve analysis for thousands of wells as part of U.S. Geological Survey (USGS) studies of continuous (unconventional) oil and gas resources in the United States. The estimated ultimate recoveries (EURs) of these wells show great variability that was analyzed at three scales: within an assessment unit (AU), among AUs of similar reservoir type, and among groups of AUs with different reservoir types. Within a particular oil or gas AU (such as the Barnett Shale), EURs vary by about two orders of magnitude between the most productive wells and the least productive ones (excluding those that are dry and abandoned). The distributions of EURs are highly skewed, with most of the wells in the lower part of the range. Continuous AUs were divided into four categories based on reservoir type and major commodity (oil or gas): coalbed gas, shale gas, other low-permeability gas AUs (such as tight sands), and low-permeability oil AUs. Within each of these categories, there is great variability from AU to AU, as shown by plots of multiple EUR distributions. Comparing the means of each distribution within a category shows that the means themselves have a skewed distribution, with a range of approximately one to two orders of magnitude. A comparison of the three gas categories (coalbed gas, shale gas, and other low-permeability gas AUs) shows large overlap in the ranges of EUR distributions. Generally, coalbed gas AUs have lower EUR distributions, shale gas AUs have intermediate sizes, and the other low-permeability gas AUs have higher EUR distributions. The plot of EUR distributions for each category shows the range of variation among developed AUs in an appropriate context for viewing the historical development within a particular AU. The Barnett Shale is used as an example to demonstrate that dividing wells into groups by time allows one to see the changes in EUR distribution. Subdivision into groups

Meson production near threshold: physics implications and new technical challenges

Energy Technology Data Exchange (ETDEWEB)

Meyer, H.O. [Indiana Univ., Bloomington, IN (United States). Dept. of Physics

1995-02-01

Recently, the study of pion production in few-nucleon systems has been advanced considerably, mainly due to experiments using internal targets in stored, cooled beams. Experimental progress has inspired theoretical insights: from measurements close to threshold we have learned that an enhancement of the axial charge caused by heavy-meson exchange significantly contributes to pion production. The study of the production of pions, as well as heavier mesons, with stored polarized beams and polarized internal targets is likely to heave important consequences for our understanding of the nuclear force. (author). 42 refs, 11 figs.

Model for determining the completion and production policy in oil wells

Energy Technology Data Exchange (ETDEWEB)

Acurero S, L A

1983-12-01

An optimization scheme for reservoir development was examined considering the value of the resource, choice of completion and production techniques, and boundary conditions for the reservoir. A 3-phase semi-analytic single-well model was formulated to determine the reservoir response for any completion and production policy. Second, an optimization scheme based on the discrete version of the maximum principle of Pontryagin and the Fibonacci search method was formulated to determine the optimal production and completion policy. Both models are combined in a general algorithm of solution proposed to solve the optimization problem, and a computer code was developed and tested.

T-F and S/DOE Gladys McCall No. 1 well, Cameron Parish, Louisiana. Geopressured-geothermal well report, Volume II. Well workover and production testing, February 1982-October 1985. Final report. Part 1

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

The T-F and S/DOE Gladys McCall No. 1 well was the fourth in a series of wells in the DOE Design Wells Program that were drilled into deep, large geopressured-geothermal brine aquifers in order to provide basic data with which to determine the technological and economic viability of producing energy from these unconventional resources. This brine production well was spudded on May 27, 1981 and drilling operations were completed on November 2, 1981 after using 160 days of rig time. The well was drilled to a total depth of 16,510 feet. The target sands lie at a depth of 14,412 to 15,860 feet in the Fleming Formation of the lower Miocene. This report covers well production testing operations and necessary well workover operations during the February 1982 to October 1985 period. The primary goals of the well testing program were: (1) to determine reservoir size, shape, volume, drive mechanisms, and other reservoir parameters, (2) to determine and demonstrate the technological and economic viability of producing energy from a geopressured-geothermal brine aquifer through long-term production testing, and (3) to determine problem areas associated with such long-term production, and to develop solutions therefor.

PRODUCTION SYSTEM MODELING OF THE GAS LIFTED WELL BY MEANS OF THE PROGRAM PROSPER

Directory of Open Access Journals (Sweden)

Sonja Koščak Kolin

2009-12-01

Full Text Available A production system analysis was made for the well Šandrovac-136 equipped with a continuous gas lift. The analysis was based on the test data which served as the foundation for creating a production well model in computer program ‘PROSPER’ (Version 10.3, License 2681. The importance of the measured data in well modeling is accuracy and reliability in predicting future developments of the production system. The model design can be divided in six steps among which the most important are: calculation of the IPR curve, calculation of the gas lift system and matching of VLP and IPR curves based on the well testing. The aim of the VLP/IPR matching is to choose an appropriate method for calculating the pressure drop gradient by applying the nonlinear regression method, which results in the system working point adjusted to the measured data. This model was applied in sensitivity analysis of the well, in which three key variables are selected to predict their effect on future system changes, primarily on changes of the production and bottom dynamic pressure (the paper is published in Croatian.

Phylogeny and evolution of life-history strategies in the Sycophaginae non-pollinating fig wasps (Hymenoptera, Chalcidoidea

Directory of Open Access Journals (Sweden)

Farache Fernando HA

2011-06-01

Full Text Available Abstract Background Non-pollinating Sycophaginae (Hymenoptera, Chalcidoidea form small communities within Urostigma and Sycomorus fig trees. The species show differences in galling habits and exhibit apterous, winged or dimorphic males. The large gall inducers oviposit early in syconium development and lay few eggs; the small gall inducers lay more eggs soon after pollination; the ostiolar gall-inducers enter the syconium to oviposit and the cleptoparasites oviposit in galls induced by other fig wasps. The systematics of the group remains unclear and only one phylogeny based on limited sampling has been published to date. Here we present an expanded phylogeny for sycophagine fig wasps including about 1.5 times the number of described species. We sequenced mitochondrial and nuclear markers (4.2 kb on 73 species and 145 individuals and conducted maximum likelihood and Bayesian phylogenetic analyses. We then used this phylogeny to reconstruct the evolution of Sycophaginae life-history strategies and test if the presence of winged males and small brood size may be correlated. Results The resulting trees are well resolved and strongly supported. With the exception of Apocrytophagus, which is paraphyletic with respect to Sycophaga, all genera are monophyletic. The Sycophaginae are divided into three clades: (i Eukoebelea; (ii Pseudidarnes, Anidarnes and Conidarnes and (iii Apocryptophagus, Sycophaga and Idarnes. The ancestral states for galling habits and male morphology remain ambiguous and our reconstructions show that the two traits are evolutionary labile. Conclusions The three main clades could be considered as tribes and we list some morphological characters that define them. The same biologies re-evolved several times independently, which make Sycophaginae an interesting model to test predictions on what factors will canalize the evolution of a particular biology. The ostiolar gall-inducers are the only monophyletic group. In 15 Myr, they

Ultra high-temperature solids-free insulating packer fluid for oil and gas production, steam injection and geothermal wells

Energy Technology Data Exchange (ETDEWEB)

Ezell, R.G.; Harrison, D.J. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Halliburton Energy Services, Calgary, AB (Canada)

2008-10-15

Uncontrolled heat transfer from production/injection tubing during thermal oil recovery via steam injection can be detrimental to the integrity of the casing and to the quality of the steam that is injected into the reservoir. An aqueous-based insulating packer fluid (IPF) was introduced to improve the steam injection process by controlling the total heat loss from the produced fluids to the surrounding wellbore, internal annuli and formation. The IPF was developed for elevated temperature environments through extensive investigation across multidisciplinary technology. The innovative system delivers performance beyond conventional systems of comparable thermal conductivity. Its density range and conductivity measurements were presented in this paper. High-temperature static aging tests showed superior gel integrity without any phase separation after exposure to temperatures higher than 260 degrees C. The new fluids are hydrate inhibitive, non-corrosive and pass oil and grease testing. They are considered to be environmentally sound by Gulf of Mexico standards. It was concluded that the new ultra high-performance insulating packer fluid (HTIPF) reduced the heat loss significantly by both conduction and convection. Heat transfer within the aqueous-based HTIPF was 97 per cent less than that of pure water. It was concluded that the HTIPF can be substituted for conventional packer fluids without compromising any well control issues. 21 refs., 1 tab., 4 figs.

The impact of energy production enhancement on environment in wildlife attractive regions

International Nuclear Information System (INIS)

Kabat, M.; Nowak, W.; Sobanski, R.

1995-01-01

Predicted application of improved technology in energy and heat production as well as implementation of new environmental policy assume an increase in energy production. There should be strongly considered utilization of renewable energy sources for wildlife regions and in the neighbourhood. In the paper there are presented possibilities of practice of alternative energy sources for regions located near national parks and wildlife reserves in West Pomerania (Szczecin). (author). 12 refs, 3 figs, 2 tabs

Parameterization of pion production and reaction cross sections at LAMPF energies

International Nuclear Information System (INIS)

Burman, R.L.; Smith, E.S.

1989-05-01

A parameterization of pion production and reaction cross sections is developed for eventual use in modeling neutrino production by protons in a beam stop. Emphasis is placed upon smooth parameterizations for proton energies up to 800 MeV, for all pion energies and angles, and for a wide range of materials. The resulting representations of the data are well-behaved and can be used for extrapolation to regions where there are no measurements. 22 refs., 16 figs., 2 tabs

Production of light fragments in hA collisions at high energies

International Nuclear Information System (INIS)

Braun, M.A.; Vechernin, V.V.

1988-12-01

Production of fast relativistic light fragments in hA collisions at high energies is considered. Direct coalescence of produced nucleons into fragments is shown to be the main mechanism for fragment production. The influence of the nuclear field is small and is not described by the well-known Butler-Pearson formulas. The coalescence coefficient strongly depends on the angle and on the behaviour of the fragment wave function at small internucleon distances. (author). 14 refs, 7 figs

Physical-chemical characteristics of figs (Ficus carica) preready to submitted to ionizing radiation

International Nuclear Information System (INIS)

Silva, Lucia C.A.S.; Harder, Marcia N.C.; Arthur, Paula B.; Lima, Roberta B.; Modlo, Debora M.; Arthur, Valter

2009-01-01

Fig (Ficus carica) is the fruit of the fig tree, original of Mediterranean, has fleshy and succulent pulp, besides being sweetened slightly. It is very appreciated for dessert. The immature form (green) can be used for make a sweet home-made. The aim of the present work was irradiate samples of fruits of pre-ready green fig, seeking the increase of the useful shelf-life. The samples were washed, made hygienic and submitted the cooking by a period of 15 minutes, after the cooking they were put in an drainer to expect cooling the fruits and after that process they were wrapped in plastic sack of 15x30cm and sealed in a manual sealing and stored at 8 deg C in a OBD camera for 7 days. Later samples were irradiated with doses of: 0 (control); 1.0 and 2.0 kGy, under a rate of dose of 0.601 kGy/h, in a Gammacell-220 irradiator and stored by 24 hours to 8 deg C in OBD. Each treatment was consisted with 3 repetitions with 10 fruits each. The samples were appraised, immediately after the irradiation, as for the parameters pH, soluble solids content, color peel, color pulp, texture, chlorophyll A, chlorophyll B and total carotenoids. The statistical analysis of the results was accomplished, through outline entirely randomized by test F for variance analysis and when significant compared by Tuckey test. By the obtained results was concluded that there was not significant difference between the treatments and the control. After four days the samples presented microbiological contamination, they went desecrated. (author)

An unconventional rate decline approach for tight and fracture-dominated gas wells

Energy Technology Data Exchange (ETDEWEB)

Duong, A.N. [ConocoPhillips Canada Resources Corp., Calgary, AB (Canada)

2010-07-01

In both Canada and the United States, unconventional gas reservoirs, especially wet shale gas are being aggressively pursued for new development. Forecasting production and estimating reserves accurately for these resource plays has become increasingly important and necessary. This paper introduced an empirically derived decline model based on a long-term linear flow in a large number of wells in tight and shale gas reservoirs. A new methodology was developed for production analysis and forecasting of unconventional reservoirs based on this model. In order to represent any uncertainty in reserve estimation, this method also utilized probability distributions of reserves in forecasting resource plays. The paper discussed the methodology development including long-term linear flow and their associated equations, as well as several field examples including a gas retrograde case and individual well analysis. Result comparisons and a discussion of the results were also presented. It was concluded that pressure initialization used in numerical modeling based on fluid gradients may have been incorrect. Results from such numerical modeling may not be representative of the shale gas flow characteristics. 24 refs., 2 tabs., 15 figs., 1 appendix.

Reserves to production ratios and present value relationships

International Nuclear Information System (INIS)

Hayhow, I. G.; Lemee, J. A.

2000-01-01

It is shown that reserves to production ratio, R/P, which optimizes development and maximizes present value, can be estimated using an equation containing the four variables of well initial production; rate, well costs, netback prices and discount rate. A sensitivity analysis of the optimization equation indicates that well costs and well productivity have the most influence on the optimum R/P. Improvements in technology beneficially affect well productivity and reduce costs, hence reducing capital requirements and producing an economic incentive to produce at low R/Ps. The influence of gas prices is considered less significant, but the expected increases in gas prices in the Western Canadian Sedimentary Basin will also act an an incentive to produce at low R/Ps. Recent gas discoveries in the Basin have been single well pools with high productivity and limited areal extent, which produce at low R/Ps. Continuation of this trend will cause further decrease in R/Ps. While this study assumed maximizing present value as the most likely objective, it is possible that regulators and producers have other objectives. It would be reasonable to expect that these alternative objectives will also favour producing at high rates and at low R/Ps. 2 tabs., 13 figs

PRODUCTION WELL WATER SHUT-OFF TREATMENT IN A HIGHLY FRACTURED SANDSTONE RESERVOIR; TOPICAL

International Nuclear Information System (INIS)

Lyle A. Johnson, Jr.

2001-01-01

As domestic oil and gas fields approach maturity or even abandonment, new methods are being tested to add life to the fields. One area being addressed is the reduction of water production to extend the economic life of a field. In many fields a very common problem is permeability heterogeneity from matrix variations, fractures, or both. Conventional procedures to remediate high water rates in fractured networks, including cement squeezing, openhole packers, and liners are generally unsuccessful. The objective of this project was to test the viability of using sequential treatment of a production well with a cross-linked polymer to restrict water production from highly permeable and fractured zones. The field used for testing was the Ashley Valley field in northeastern Utah. The process proposed for testing in this field was the sequential application of small batches of a cross-linked polymer, chromium (III) polyacrylamide polymer (Marcit(trademark)). First, the highest permeability fractures were to be blocked, followed progressively by smaller fractures, and finally the higher permeability matrix channels. The initial application of this polymer in September 1997 in the Ashley Valley (AV) well No.2 did increase oil production while decreasing both water production and the relative permeability to water. The successive application of the polymer was considered as a method to increase both daily and ultimate oil production and reduce produced water. The second polymer treatment was conducted in October 1999 in AV No.2. The treatment consisted of 4,994 barrels of 1,500-mg/l to 9,000-mg/l polymer at surface injection pressures no higher than 380 psig. During injection, four offset wells showed polymer breakthrough and were shut in during the remaining treatment. Present oil and water production rates for AV No.2 are 14 BOPD and 2,700 BWPD, which is a 44% decrease in the oil rate and a 40% reduction in water from the rates after the first treatment. The decrease in

Traditional agroecosystems as conservatories and incubators of cultivated plant varietal diversity: the case of fig (Ficus carica L. in Morocco

Directory of Open Access Journals (Sweden)

Santoni Sylvain

2010-02-01

Full Text Available Abstract Background Traditional agroecosystems are known to host both large crop species diversity and high within crop genetic diversity. In a context of global change, this diversity may be needed to feed the world. Are these agroecosystems museums (i.e. large core collections or cradles of diversity? We investigated this question for a clonally propagated plant, fig (Ficus carica, within its native range, in Morocco, but as far away as possible from supposed centers of domestication. Results Fig varieties were locally numerous. They were found to be mainly highly local and corresponded to clones propagated vegetatively. Nevertheless these clones were often sufficiently old to have accumulated somatic mutations for selected traits (fig skin color and at neutral loci (microsatellite markers. Further the pattern of spatial genetic structure was similar to the pattern expected in natural population for a mutation/drift/migration model at equilibrium, with homogeneous levels of local genetic diversity throughout Moroccan traditional agroecosystems. Conclusions We conclude that traditional agroecosystems constitue active incubators of varietal diversity even for clonally propagated crop species, and even when varieties correspond to clones that are often old. As only female fig is cultivated, wild fig and cultivated fig probably constitute a single evolutionary unit within these traditional agroecosystems. Core collections, however useful, are museums and hence cannot serve the same functions as traditional agroecosystems.

Effect of using radiation and some growth promoters on the economics of egg production during the second production season in egypt

International Nuclear Information System (INIS)

Solieman, M.H.M.

1996-01-01

Layer chicken farms are considered important projects which play a major role in the national economy, for their fast money cycles and their high profits. Many breeders have shared in animal production and egg production through the private projects in Egypt. Our government also established many layer chicken farms to solve the production problems and actual consumption food problems in egypt are due to a lack of food quality and quantity as well as in food calory. The egyptian consumer dose not obtain the same quantity of protein as his counter parts in the developed countries: Particular egg protein which considers a cheap source. 36 tabs.,5 figs.,21 refs

Predicting the stability of horizontal wells and multi-laterals - the role of in situ stress and rock properties

Energy Technology Data Exchange (ETDEWEB)

Moos, A.; Peska, P. [GeoMechanics International (United States); Zoback, M. D. [Stanford Univ., CA (United States)

1998-12-31

A new suite of software tools, developed to study wellbore stability in a wide variety of geologic environments is introduced as means by which to accurately predict optimally-stable wellbore trajectories from knowledge of the stress tensor. In step one of the process stress, is determined from observations of failure in existing wells; in step two, this knowledge is applied to predict the stability of proposed wells while drilling, as well as later during production. Three case studies are presented to illustrate use of this approach. The examples concentrate on issues related to the stability of highly inclined wells, but the approach can be used to determine the state of stress for other purposes as well. 21 refs., 8 figs.

FigS7.txt

Data.gov (United States)

U.S. Environmental Protection Agency — This is an ascii file with georeferencing information containing the data plotted in Figure S7 of the supplemental information manuscript section. This dataset is...

FigS8.txt

Data.gov (United States)

U.S. Environmental Protection Agency — This is an ASCII file with georeferencing information containing data plotted in Figure S8 of the supplemental information section of the manuscript. This dataset is...

Interlaboratory comparison of fig (Ficus carica L. microsatellite genotyping data and determination of reference alleles

Directory of Open Access Journals (Sweden)

Matjaž HLADNIK

2018-04-01

Full Text Available Microsatellites have been identified as the marker of choice in plant genotyping projects. However, due to length discrepancies obtained between different laboratories for the same allele, interlaboratory comparison of fingerprinting results is often a difficult task. The objectives of this study were to compare genotyping results of two laboratories, to evaluate genetic parameters of microsatellite markers and to determine reference allele sizes for fig cultivars from the Istrian peninsula.Genotyping results of ninety fig (Ficus carica L. accessions were comparable between the laboratories despite differences observed when comparing electropherograms of different capillary electrophoresis systems. Differences in lengths of the same alleles were detected due to different PCR methods and laboratory equipment, but the distances between alleles of the same locus were preserved. However, locus FSYC01 exhibited one allele dropout which led to misidentification of 28 heterozygotes as homozygote individuals suggesting this locus as unreliable. Allele dropout was assigned to the tail PCR technology or to a touchdown PCR protocol.Genotypes of twenty-four reference cultivars from the Istrian peninsula were confirmed by both laboratories. These results will contribute to the usage of markers with greater reliability, discrimination power and consequently, to more reliable standardization with other fig genotyping projects.

Laboratory testing and field implementation of scale inhibitor squeeze treatments to subsea and platform horizontal wells, North Sea Basin

Energy Technology Data Exchange (ETDEWEB)

Jordan, M. M.; Lewis, M. [Nalco/Exxon Energy Chemicals Ltd, Aberdeen (United Kingdom); Tomlinson, C. J.; Pritchard, A. R. P. [Enterprise Oil Plc, Aberdeen (United Kingdom)

1998-12-31

Field results from a number of scale squeeze treatments carried out on subsea and platform horizontal wells in the Nelson Field of the North Sea are presented. Scale inhibitor chemicals are reviewed along with factors which influence inhibitor selection for both horizontal and highly deviated wells. Formation brine/inhibitor incompatibility, formation minerals/inhibitor incompatibility, and the potential for sand production and oil-in-water process as a result of these incompatibilities, are discussed. Practical difficulties in squeezing subsea horizontal wells, the use of chemical stabilizers to reduce formation brine/inhibitor incompatibility, variation of pump rates to encourage propagation of inhibitor along the wellbore, and the potential of fluid diversion are outlined, stressing the significance of production logging data (or good reservoir simulation data), to evaluate the location of water production prior to the squeeze treatment. Results of these treatments show that with the correct laboratory evaluation of both scale inhibitor and divertor agents, and with appropriate utilization of production logging or reservoir simulation data, it is possible to carry out scale inhibitor squeeze treatments of subsea and platform horizontal wells without having to resort to coiled tubing. 22 refs., 1 tab., 14 figs

A new method in predicting productivity of multi-stage fractured horizontal well in tight gas reservoirs

Directory of Open Access Journals (Sweden)

Yunsheng Wei

2016-10-01

Full Text Available The generally accomplished technique for horizontal wells in tight gas reservoirs is by multi-stage hydraulic fracturing, not to mention, the flow characteristics of a horizontal well with multiple transverse fractures are very intricate. Conventional methods, well as an evaluation unit, are difficult to accurately predict production capacity of each fracture and productivity differences between wells with a different number of fractures. Thus, a single fracture sets the minimum evaluation unit, matrix, fractures, and lateral wellbore model that are then combined integrally to approximate horizontal well with multiple transverse hydraulic fractures in tight gas reservoirs. This paper presents a new semi-analytical methodology for predicting the production capacity of a horizontal well with multiple transverse hydraulic fractures in tight gas reservoirs. Firstly, a mathematical flow model used as a medium, which is disturbed by finite conductivity vertical fractures and rectangular shaped boundaries, is established and explained by the Fourier integral transform. Then the idea of a single stage fracture analysis is incorporated to establish linear flow model within a single fracture with a variable rate. The Fredholm integral numerical solution is applicable for the fracture conductivity function. Finally, the pipe flow model along the lateral wellbore is adapted to couple multi-stages fracture mathematical models, and the equation group of predicting productivity of a multi-stage fractured horizontal well. The whole flow process from the matrix to bottom-hole and production interference between adjacent fractures is also established. Meanwhile, the corresponding iterative algorithm of the equations is given. In this case analysis, the productions of each well and fracture are calculated under the different bottom-hole flowing pressure, and this method also contributes to obtaining the distribution of pressure drop and production for every

Orphan Well Association 2007-08 annual report

International Nuclear Information System (INIS)

2008-06-01

The Alberta Oil and Gas Orphan Abandonment and Reclamation Association or Orphan Well Association (OWA) is a not for profit organization which operates as a separate, financially independent organization under the legal authority delegated by the Alberta Energy Resources Conservation Board (ERCB). The OWA was established in January 2002 as a joint initiative between the upstream oil and gas industry and the provincial government. The Alberta government supports the initiative to deal with upstream oil and gas orphan wells through the ERCB and Alberta Environment (AENV). The ERCB collects funds from industry through an annual orphan fund levy and other fees which are then contributed directly to the OWA to cover the expenditures on orphan well abandonment and reclamation activities. The OWA prepares a yearly annual budget which determines the amount of the orphan fund levy. This budget is then approved by its four member organizations, notably the Canadian Association of Petroleum Producers (CAPP), Small Explorers and Producers Association of Canada, ERCB and AENV. This annual report for the OWA for 2007-2008 presented a historical summary of funding; a historical summary of expenditures; and a discussion of operating and financial highlights. These operating highlights included well abandonment; pipeline abandonment; facility decommissioning; and site reclamation. Financial statements for the OWA were also provided. It was concluded that the OWA had a year of responsible and productive operations. 8 tabs., 6 figs

Long-term dietary supplementation of pomegranates, figs and dates alleviate neuroinflammation in a transgenic mouse model of Alzheimer's disease.

Directory of Open Access Journals (Sweden)

Musthafa Mohamed Essa

Full Text Available Alzheimer's disease (AD is a devastating age-related neurodegenerative disease with no specific treatment at present. The APPsw/Tg2576 mice exhibit age-related deterioration in memory and learning as well as amyloid-beta (Aβ accumulation, and this mouse strain is considered an effective model for studying the mechanism of accelerated brain aging and senescence. The present study was aimed to investigate the beneficial effects of dietary supplements pomegranate, figs, or the dates on suppressing inflammatory cytokines in APPsw/Tg2576 mice. Changes in the plasma cytokines and Aβ, ATP, and inflammatory cytokines were investigated in the brain of transgenic mice. Significantly enhanced levels of inflammatory cytokines IL-1β, IL-2, IL-3, IL-4, IL-5, IL-6, IL-9, IL-10, TNF-α and Eotaxin activity were decreased by administration of the diet supplements containing pomegranates, figs, or dates. In addition, putative delays in the formation of senile plaques, as indicated by a decreasing tendency of brain Aβ1-40 and Aβ1-42 contents, were observed. Thus, novel results mediated by reducing inflammatory cytokines during aging may represent one mechanism by which these supplements exert their beneficial effects against neurodegenerative diseases such as AD.

Use of well points to determine the thickness and extent of floating product atop the water table

International Nuclear Information System (INIS)

Liikala, T.L.; Lewis, R.; Gilmore, T.; Hoffmann, H.

1994-01-01

The release of petroleum products to the ground water is a widespread problem. Conventional plume tracking techniques are to drill wells and measure product thickness and extent. In this study, well points were installed to rapidly and inexpensively determine the thickness and extent of floating product atop the water table. Spills and leaks of JP-4 have produced a discrete full layer atop the water table at one site at Eielson Air Force Base near Fairbanks, Alaska. The 0.2- to 1.3-foot-thick layer was identified in two ground water monitoring wells at a depth of approximately 10 feet. The layer is contained within unconsolidated glaciofluvial sands and gravels. A comprehensive assessment of the product thickness and extent was necessary for the site remedial investigation/feasibility study. The emplacement of additional monitoring wells was discouraged because of time and budget constraints. The fuel layer was delineated with 18 screened well points. The points consist of 2-inch-diameter galvanized steel pipe. The points were driven into the floating products with a hollow-stem auger rig sampling hammer. The product thickness was measured with an interface probe. The presence of floating product could be measured immediately after emplacement; the product thickness measurements typically stabilized within three days. The product thickness compared favorably with those measured in adjacent monitoring wells

Geostatistics applied in mine production planning

Energy Technology Data Exchange (ETDEWEB)

Zerdin, F.; Markic, S.; Subelj, A. [NTF, Ljubljana (Slovenia)

1998-07-01

Long-term plan for lignite mine Velenje has been made by using a technical 'parametrisation' method where the basis for periodic, middle-term and short-term plans as well as for scheduling has already been fixed. Plans are presented by grade (heating value in GJ), quantity of ROM coal in tons and quantity of excavated material in cubic metre for each sequence of the seam or whole seam as well as for all working seams in the mines as a whole which correspond to a defined time period. Grade planning aims at achieving uniform product quality to meet contractual obligations. 17 refs., 10 figs.

PRODUCTION WELL PERFORMANCE ENHANCEMENT USING SONICATION TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

Michael A. Adewumi; M. Thaddeus Ityokumbul; Robert W. Watson; Mario Farias; Glenn Heckman; Johnson Olanrewaju; Eltohami Eltohami; Bruce G. Miller; W. Jack Hughes; Thomas C. Montgomery

2003-12-17

The objective of this project is to develop a sonic well performance enhancement technology that focuses on near wellbore formations. In order to successfully achieve this objective, a three-year project has been defined with each year consisting of four tasks. The first task is the laboratory-scale study whose goal is to determine the underlying principles of the technology. The second task will develop a scale-up mathematical model to serve as the design guide for tool development. The third task is to develop effective transducers that can operate with variable frequency so that the most effective frequencies can be applied in any given situation. The system, assembled as part of the production string, ensures delivery of sufficient sonic energy to penetrate the near-wellbore formation. The last task is the actual field testing of the tool. The first year of the project has been completed.

A field guide for well site geologists: Cable tool drilling

International Nuclear Information System (INIS)

Last, G.V.; Liikala, T.L.

1987-12-01

This field is intended for use by Pacific Northwest Laboratory well site geologists who are responsible for data collection during the drilling and construction of monitoring wells on the Hanford Site. This guide presents standardized methods for geologic sample collection and description, and well construction documentation. 5 refs., 5 figs., 2 tabs

Australian uranium production and trade trends

International Nuclear Information System (INIS)

Armstrong, G.; Braddick, P.

1994-01-01

After overviewing the factors influencing the worldwide production and consumption of uranium, the authors review the world situation and assess the industry in Australia and the impact of Government policy on uranium mining. The conclusion is that Australia, with almost 30 per cent of the western world's uranium resources, including several of the highest grade and lowest cost deposits in the world, remains well placed to enjoy a substantial share of growth in the uranium market, should existing Government restrictions be lifted. 6 figs., 2 tabs

Comparison of the Utility of Two Assessments for Explaining and Predicting Productivity Change: Well-Being Versus an HRA.

Science.gov (United States)

Gandy, William M; Coberley, Carter; Pope, James E; Rula, Elizabeth Y

2016-01-01

To compare utility of employee well-being to health risk assessment (HRA) as predictors of productivity change. Panel data from 2189 employees who completed surveys 2 years apart were used in hierarchical models comparing the influence of well-being and health risk on longitudinal changes in presenteeism and job performance. Absenteeism change was evaluated in a nonexempt subsample. Change in well-being was the most significant independent predictor of productivity change across all three measures. Comparing hierarchical models, well-being models performed significantly better than HRA models. The HRA added no incremental explanatory power over well-being in combined models. Alone, nonphysical health well-being components outperformed the HRA for all productivity measures. Well-being offers a more comprehensive measure of factors that influence productivity and can be considered preferential to HRA in understanding and addressing suboptimal productivity.

Results of investigations at the Zunil geothermal field, Guatemala: Well logging and brine geochemistry

Energy Technology Data Exchange (ETDEWEB)

Adams, A.; Dennis, B.; Van Eeckhout, E.; Goff, F.; Lawton, R.; Trujillo, P.E.; Counce, D.; Archuleta, J. (Los Alamos National Lab., NM (USA)); Medina, V. (Instituto Nacional de Electrificacion, Guatemala City (Guatemala). Unidad de Desarollo Geotermico)

1991-07-01

The well logging team from Los Alamos and its counterpart from Central America were tasked to investigate the condition of four producing geothermal wells in the Zunil Geothermal Field. The information obtained would be used to help evaluate the Zunil geothermal reservoir in terms of possible additional drilling and future power plant design. The field activities focused on downhole measurements in four production wells (ZCQ-3, ZCQ-4, ZCQ-5, and ZCQ-6). The teams took measurements of the wells in both static (shut-in) and flowing conditions, using the high-temperature well logging tools developed at Los Alamos National Laboratory. Two well logging missions were conducted in the Zunil field. In October 1988 measurements were made in well ZCQ-3, ZCQ-5, and ZCQ-6. In December 1989 the second field operation logged ZCQ-4 and repeated logs in ZCQ-3. Both field operations included not only well logging but the collecting of numerous fluid samples from both thermal and nonthermal waters. 18 refs., 22 figs., 7 tabs.

Well-to-Wheel Analysis of Solar Hydrogen Production and Utilization for Passenger Car Transportation

Energy Technology Data Exchange (ETDEWEB)

Felder, R.; Meier, A.

2006-07-01

A well-to-wheel analysis is conducted for solar hydrogen production, transport, and usage in future passenger car transportation. Solar hydrogen production methods and selected conventional production Technologies are examined using a life cycle assessment (LCA). Utilization of hydrogen in fuel cells is compared with advanced gasoline and diesel power trains. Solar scenarios show distinctly lower greenhouse gas (GHG) emissions than fossil-based scenarios. For example, using solar hydrogen in fuel cell cars reduces life cycle GHG emissions by 75% compared to advanced fossil fuel power trains and by more than 90% if car and road infrastructure are not considered. Solar hydrogen production allows a reduction of fossil energy requirements by a factor of up to 10 compared to using conventional Technologies. Major environmental impacts are associated with the construction of the steel-intensive infrastructure for solar energy collection due to mineral and fossil resource consumption as well as discharge of pollutants related to today's steel production technology. (Author)

Economics of Russian oil production

International Nuclear Information System (INIS)

Gubenko, I.

1993-01-01

The main technical indicators of oil production in Russia are presented from the year 1988, when the current decline in oil production started. In 1992, only 9 new oil deposits were put into production, and average well productivity dropped to 12.4 tonnes/d. The number of idle wells reached 31,934 as compared to 8,714 in 1988. The share of low productivity deposits in 1993 was 49.7%. In the first five months of 1993, the number of new wells put into operation failed to offset the shutdown of old wells. Although the number of workovers grew by 32%, this work was insufficient to stabilize oil production. The decline in production is due to the general state of economic stability and endless reorganizations in the economy, and to the lack of sufficient investment in the industry. Oil-producing enterprises have lacked funds due to systematic and growing indebtedness of buyers of crude. This overdue indebtedness reached 393 billion rubles by the beginning of 1993. Although domestic oil prices increased sharply in 1991-92, the volume of production in real terms has dropped by nearly a third. Oil is sold at different prices to different categories of buyers. Prices include expenses, profit from which a 32% profits tax is paid, excise taxes, and payments to a centralized price-regulation fund. From the industry point of view, certain reforms are necessary to reconstruct and develop the industry. These include ensuring payments to oil producers, gradual transfer of Russian prices to world levels, lowering taxes, and adoption and refinement of a law on oil. 1 fig., 7 tabs

Optimization of SAGD wellbore completions : short production tubing string sensitivities

Energy Technology Data Exchange (ETDEWEB)

Cokar, M.; Graham, J. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Petro-Canada, Calgary, AB (Canada)

2008-10-15

This study investigated the effects of changing the landing position of short production tubing strings near the heel of steam assisted gravity drainage (SAGD) production wells. A homogenous discretized wellbore model was used to model the reservoir and wellbore simultaneously in order to study wellbore and reservoir interactions. The aim of the study was to develop a method of optimizing bitumen production and determining the most economical position for wellbore strings. Simulations were conducted to examine the effect of shortening the production tubing string and examine the impact of extending the tubing string beyond the heel of the well on bitumen bitumen production rates and the steam oil ratio (SOR). Results of the study showed that a shortened string decreased bitumen production rates, while the amounts of steam produced through the tubing string increased. When the tubing string was extended past the heel of the well, bitumen production rates remained the same, but steam injection rates and SOR decreased. A lower pressure differential between the injector and producer wells was also observed. The study showed that SAGD producers can re-position production tubing strings in order to determine ratios of liquid production. It was concluded that although placing the short production tubing string close to the heel increased oil production, a longer tubing string improved production rates while lowering operating costs. 3 refs., 3 tabs., 35 figs.

Condutividade e difusividade térmica do figo (Ficus carica L. "Roxo de Valinhos" Conductivity and thermal diffusivity of fig fruit (Ficus carica L. "Roxo de Valinhos"

Directory of Open Access Journals (Sweden)

Saul D. Sarria

2004-04-01

Full Text Available O resfriamento e/ou congelamento de produtos hortícolas, depois da colheita, é realizado com o objetivo de retirar o calor desses produtos, permitindo-lhes, em função disso, um tempo maior de conservação. Portanto, o conhecimento das propriedades físicas que envolvem transferência de calor do figo "Roxo de Valinhos" é útil para o cálculo de projetos e a análise de sistemas de engenharia de alimentos em geral, assim como para o emprego em equações de modelos matemáticos termodinâmicos. Neste trabalho, foram determinadas, experimentalmente, a condutividade e a difusividade térmica do figo inteiro no estádio rami e, a partir desses valores, foi determinado o calor específico. Foi utilizado o método transiente da Fonte Linear de Calor. Foi introduzida nas frutas uma sonda que contém resistência elétrica e termopares. Para manter constante a temperatura da fruta, montou-se um sistema de resfriamento a água. Encontrou-se que o figo rami apresentou um valor de condutividade térmica de 0,52 W m-1 °C, difusividade térmica de 1,56 x 10-7 m² s-1, massa específica do figo de 815,6 kg m-3 e calor específico de 4,07 kJ kg-1 °C.The post harvest cooling and/or freezing processes for horticultural products have been carried out with the objective of removing the heat from these products, allowing them a bigger period of conservation. Therefore, the knowledge of the physical properties that involve heat transference in the fig fruit "Roxo de Valinhos" is useful for calculating projects and systems of food engineering in general, as well as, for using in equations of thermodynamic mathematical models. The values of conductivity and thermal diffusivity of the whole fig fruit-rami index were determined, and from these values it was determined the value of the specific heat. For these determination it was used the transient method of the Line Heat Source. The results shown that the fig fruit has a thermal conductivity of 0.52 W m-1�

CBM collaboration : PTAC bringing companies together to jumpstart complex well technology advance

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2008-03-15

This article discussed a joint industry project (JIP) established by the Petroleum Technology Alliance Canada (PTAC) to develop technology applications for coalbed methane (CBM) complexes. A minimum of 8 companies will be needed to initiate the JIP when changes to the royalty regime by the Alberta government are expected to take place. It is expected that the CBM JIP will develop and transfer best practices for optimized CBM exploitation through the use of non-vertical well technology. Three tasks have also been outlined for the project's first year: (1) the creation of a website with public and private access modules; (2) the development of a library of detailed well histories that document field experiences; and (3) launching studies into coal fines-contaminated production streams. The development of horizontal drilling techniques is expected to result in improved environmental benefits due to accelerated production procedures and improved pad configurations. The well history library will act as a primary field data source. It is estimated that approximately 20 trillion cubic feet of CBM reserves are available for recovery using known technologies. However, the development of new technologies is expected to result in an estimated 200 Tcf of recoverable CBM reserves. 1 fig.

The association between modifiable well-being risks and productivity: a longitudinal study in pooled employer sample.

Science.gov (United States)

Shi, Yuyan; Sears, Lindsay E; Coberley, Carter R; Pope, James E

2013-04-01

To examine the longitudinal relationship between modifiable well-being risks and productivity. A total of 19,121 employees from five employers participated in baseline and follow-up well-being assessment surveys. Multivariate regressions assessed whether changes in absenteeism, presenteeism, and job performance were associated with changes in 19 modifiable well-being risks. Over time, a 5% reduction in total count of well-being risks was significantly associated with 0.74% decrease in absenteeism, 2.38% decrease in presenteeism, and 0.24% increase in performance. High blood pressure, recurring pain, unhealthy diet, inadequate exercise, poor emotional health, poor supervisor relationship, not utilizing strengths doing job, and organization unsupportive of well-being had greater independent contributions in explaining productivity impairment. The often-ignored well-being risks such as work-related and financial health risks provided incremental explanation of longitudinal productivity variations beyond traditional measures of health-related risks.

Assessment of Gas Production Potential from Hydrate Reservoir in Qilian Mountain Permafrost Using Five-Spot Horizontal Well System

Directory of Open Access Journals (Sweden)

Yun-Pei Liang

2015-09-01

Full Text Available The main purpose of this study is to investigate the production behaviors of gas hydrate at site DK-2 in the Qilian Mountain permafrost using the novel five-spot well (5S system by means of numerical simulation. The whole system is composed of several identical units, and each single unit consists of one injection well and four production wells. All the wells are placed horizontally in the hydrate deposit. The combination method of depressurization and thermal stimulation is employed for hydrate dissociation in the system. Simulation results show that favorable gas production and hydrate dissociation rates, gas-to-water ratio, and energy ratio can be acquired using this kind of multi-well system under suitable heat injection and depressurization driving forces, and the water production rate is manageable in the entire production process under current technology. In addition, another two kinds of two-spot well (2S systems have also been employed for comparison. It is found that the 5S system will be more commercially profitable than the 2S configurations for gas production under the same operation conditions. Sensitivity analysis indicates that the gas production performance is dependent on the heat injection rate and the well spacing of the 5S system.

Oscillatory magnetoconductance of quantum double-well channels

International Nuclear Information System (INIS)

Rojo, A.G.; Kumar, N.; Balseiro, C.A.

1988-07-01

The recently observed flux-periodic interference effect between parallel quantum double-well channels is theoretically studied in a discrete model that takes into account tunneling between channels. We obtain oscillatory magnetoconductance with small modulations which is attributable to the tunneling. Our treatment includes the effect of evanescent modes. (author). 7 refs, 2 figs

Well test: production analysis and allocation measurement; Teste de poco: analise da producao e medicao de apropriacao

Energy Technology Data Exchange (ETDEWEB)

Geron, Luis Carlos [Smar Equipamentos Industriais Ltda., Sertaozinho, SP (Brazil). Dept. de Engenharia Aplicacoes; Tateishi, Sergio Hideki [Smar Equipamentos Industriais Ltda, Sertaozinho, SP (Brazil). Dept. de Pesquisa e Desenvolvimento

2008-07-01

The well test is an instrument frequently used to evaluate the production capacity of wells and it usually has specific requirements in the flow measurement, that are not necessary in the flow measurement system for custody transfer applications. Starting with the requirement to measure the injected product in the well when it is in the recuperation phase and it also includes compliance to specific standards for allocation measurement, because these hydrocarbon products are not treated as well as that ones in the production streams. Other important issue associated to the well test is the employment of new technologies, that helps to reduce the uncertainty of measurement as digital communication between the field devices and the flow computer through an open protocol as the Foundation Field bus. Another indication of technology evolution in the flow measurement focusing a lower uncertainty is the new version of API MPMS 11.1:2004, that requires calculation with double precision floating point, as well the correction factors with 5 decimal digits. (author)

Study of radiolysis products of natural organic materials by means of gas chromatography

International Nuclear Information System (INIS)

Pogocki, D.

1994-01-01

Analytical methods based on gas chromatography for identification determination of products arising during food irradiation have been presented. Behind the classics version of the methods one has shown also combined methods being the on-line connection of gas chromatography with mass spectroscopy as well as gas chromatography with liquid chromatography and mass spectroscopy. The applicability as well as weakness and advantages of each version have been discussed on the context of food irradiation. 11 refs, 7 figs

A Simple Physics-Based Model Predicts Oil Production from Thousands of Horizontal Wells in Shales

KAUST Repository

Patzek, Tadeusz

2017-10-18

Over the last six years, crude oil production from shales and ultra-deep GOM in the United States has accounted for most of the net increase of global oil production. Therefore, it is important to have a good predictive model of oil production and ultimate recovery in shale wells. Here we introduce a simple model of producing oil and solution gas from the horizontal hydrofractured wells. This model is consistent with the basic physics and geometry of the extraction process. We then apply our model thousands of wells in the Eagle Ford shale. Given well geometry, we obtain a one-dimensional nonlinear pressure diffusion equation that governs flow of mostly oil and solution gas. In principle, solutions of this equation depend on many parameters, but in practice and within a given oil shale, all but three can be fixed at typical values, leading to a nonlinear diffusion problem we linearize and solve exactly with a scaling

Potential for horizontal well technology in the U.S

International Nuclear Information System (INIS)

Biglarbigi, K.; Mohan, H.; Ray, R.M.; Meehan, D.N.

2000-01-01

In the past decade, the use of horizontal well technology has increased significantly in the U.S., contributing to the drilling of 600 to 1000 horizontal oil wells annually. A total of 86 per cent of the existing horizontal wells have been drilled in three formations, the Austin chalk in Texas, the Bakken shale in North Dakota, and the Niobrara in Colorado and Wyoming. A unique analytical system has been developed by the United States Department of Energy, National Petroleum Technology Office (USDOE/NPTO) to assess the potential for greater use of horizontal well technology for other oil resources in other geological formations. The analytical system is designed to be used in association with other enhanced recovery methods that make up the DOE's Total Oil Recovery Information System (TORIS). The DOE/NPTO collaborated with industry to identify the target resource for horizontal well technology and to evaluate its future recovery potential under different economic and technological conditions. This paper provides a national summary of the potential for additional production and reserves with more diverse application of horizontal wells in various types of U.S. oil resources, including the rest of the fractured reservoirs in the Austin chalk, other fractured reservoirs in the north and northwestern states, thin-bed reservoirs, and mature waterflood field. The results were presented in terms of production, reserves and national economic benefits with a full cash-flow analysis at oil prices in the range of $16 to $24 U.S. per bbl. It is estimated that 541 million to 1 billion bbls of new reserves are economically producible at these prices. The reserves estimates pertain to future horizontal wells in known fields only and are in addition to the reserves for the existing wells as of 1 January 1998. Potential production is substantial, ranging from 50 million to 85 million bbl per year by 2004 and then declining at a rate of 8 per cent per year in the following years

Seasonal abundance of the navel orangeworm, Amyelois transitella, in figs and the effect of peripheral aerosol dispensers on sexual communication.

Science.gov (United States)

Burks, Charles S; Brandl, David G

2004-01-01

We used flight traps baited with unmated female navel orangeworm Amyelois transitella (Walker) (Lepidoptera: Pyralidae) to examine, over two growing seasons, seasonal changes in the abundance of males in fig orchards and the impact of release of 48 mg per ha per day of the pheromone component (Z,Z)-11,13-hexadecadienal from peripherally-located timed-release dispensers on the ability of males to find unmated females within 16-ha treatment plots. Material was placed out and mating disruption was commenced at the beginning of April in the first year, and at the beginning of July the second year. This technique effectively prevented males from finding females in female-baited traps placed throughout the plot. Navel orangeworm abundance was high in figs during the first and third flight, but lower in June and July during the second flight. Since Calimyrna figs are not susceptible to attack by navel orangeworm until mid-to-late July, these findings suggest that materials cost can be reduced by beginning treatment later. Implications for insect pest management in figs and other California crops are discussed.

Radioisotope production

International Nuclear Information System (INIS)

1988-01-01

The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

The Effect of Compost and the Ripe Fruit Waste of Fig on some Physical Properties of Surface Soil

Directory of Open Access Journals (Sweden)

zahra dianat maharluei

2017-02-01

Full Text Available Introduction: In arid and semi-arid soils, low organic matter is one of the barriers to achieving optimal performance. The soils with more organic matter have a better structure and are more resistant to erosive factors such as water and wind. Soil organic matter has a particular importance and has significant impact on the stability of soil aggregates, the extension of plant root system, carbon and water cycles and soil resistance to erosion. This substance acts as a cementing agent and plays an important role in soil flocculation and formation of resistant aggregates.Also, the addition of organic matter to the soil increases soil porosity and decreases soil bulk density. Materials and Methods: In this research, the effect of the two types of organic matter (compost and the ripe fruit waste of fig on some soil physical properties was studied. A factorial experiment based on completely randomized design, including the four levels of compost and the ripe fruit waste of fig (0, 1, 2 and 4 by weight % and three soil types (loamy sand, loam and silty clay loam with three replications was carried out. The soil samples were collected from the three territories of Fars Province: loamy sand soil from Shiraz, loamy soil from Maharlu and Silty clay loam soil from Zarghan area. The soil samples were air dried and passed through a 2 mm sieve. The physical properties including the bulk density, particle density, porosity, moisture content and soil crust strength was measured. In this research, the soil texture by hydrometer method, Electrical conductivity of the soil saturated paste extract by electrical conductivity meter, saturated paste pH by pH meter, seedling emergence test, soil crust strength by a pocket penetrometer (HUMBOLDT MFG.CO. bulk density by cylindrical sample and particle density by pycnometer method were measured. The fig fruit treatments were prepared by thoroughly mixing the dried powder of ripe fig fruit passed through a 2 mm sieve (with

MATHEMATICAL FRAMEWORK OF THE WELL PRODUCTIVITY INDEX FOR FAST FORCHHEIMER (NON-DARCY) FLOWS IN POROUS MEDIA

KAUST Repository

AULISA, EUGENIO

2009-08-01

Motivated by the reservoir engineering concept of the well Productivity Index, we introduced and analyzed a functional, denoted as "diffusive capacity", for the solution of the initial-boundary value problem (IBVP) for a linear parabolic equation.21 This IBVP described laminar (linear) Darcy flow in porous media; the considered boundary conditions corresponded to different regimes of the well production. The diffusive capacities were then computed as steady state invariants of the solutions to the corresponding time-dependent boundary value problem. Here similar features for fast or turbulent nonlinear flows subjected to the Forchheimer equations are analyzed. It is shown that under some hydrodynamic and thermodynamic constraints, there exists a so-called pseudo steady state regime for the Forchheimer flows in porous media. In other words, under some assumptions there exists a steady state invariant over a certain class of solutions to the transient IBVP modeling the Forchheimer flow for slightly compressible fluid. This invariant is the diffusive capacity, which serves as the mathematical representation of the so-called well Productivity Index. The obtained results enable computation of the well Productivity Index by resolving a single steady state boundary value problem for a second-order quasilinear elliptic equation. Analytical and numerical studies highlight some new relations for the well Productivity Index in linear and nonlinear cases. The obtained analytical formulas can be potentially used for the numerical well block model as an analog of Piecemann. © 2009 World Scientific Publishing Company.

Improved productivity justifies world record underbalanced perforating operation

Energy Technology Data Exchange (ETDEWEB)

Johnson, A. M.; Bakker, E. R. [NAM B.V. (Netherlands); Hungerford, K.

1998-12-31

To achieve vertical connectivity with all the layers, and thus long term sustained productivity in a highly stratified reservoir, a one run underbalanced perforating operation was considered necessary. Due to coiled tube limitations in this deep (5136 m along hole, 3700 m true vertical depth, with a maximum deviation of 89 degrees), high pressure well a hydraulic workover unit (HWU) was selected to deploy and retrieve the guns. The operation is considered a world record since this is the longest section (total gross interval of 1026 m perforated) of guns conveyed, fired underbalanced and deployed out of a live well. It is concluded that the improved productivity more than justified the additional time, effort and expenditure; considering the full life cycle of the well it is readily apparent that the operation was an economic and technical success. Details of the considerations leading to the perforating technique selection, the planning and the execution of the operation, and the validation of the technique in terms of productivity gains, are provided. 13 refs., 7 figs.

The theory of heavy flavour production

Energy Technology Data Exchange (ETDEWEB)

Ellis, R.K.

1989-08-09

The theory of heavy quark production in hadronic reactions is reviewed. Rates for the production of charm, bottom and top quarks at energies of current interest are presented. 34 refs., 19 figs., 2 tabs.

The theory of heavy flavour production

International Nuclear Information System (INIS)

Ellis, R.K.

1989-01-01

The theory of heavy quark production in hadronic reactions is reviewed. Rates for the production of charm, bottom and top quarks at energies of current interest are presented. 34 refs., 19 figs., 2 tabs

Quarkonia production at CDF

International Nuclear Information System (INIS)

Demina, R.

1996-08-01

We present the results of J/ψ, ψ', χ c and Υ(1S), Υ(2S), Υ(3S) production in the proton-antiproton collisions at √s = 1800 GeV measured with the CDF Detector. Contributions of different production mechanisms are discussed. 10 refs., 7 figs

Structural control over well productivity in the Jundiaí River Catchment, Southeastern Brazil

Directory of Open Access Journals (Sweden)

Mirna A. Neves

2007-06-01

Full Text Available The well productivity in crystalline terrains is extremely changeable and depends on external factors, in addition to the intrinsic properties of rocks. In the Jundiaí River Catchment, Southeastern Brazil, the main factor that influences well productivity is the existence of open discontinuities permeability in geologic environments that favor groundwater recharge. In that area, Pre-Cambrian shear and fault zones were reactivated throughout geologic time, controlling the morphostructural compartments and the Cenozoic sedimentary deposition. Superposition of productivity data and structural maps showed that more productive wells are concentrated mainly along the regional geologic structures. The structural control over well productivity is also noticeable in detailed scale. Using fine scale maps we show that the most productive wells are located in areas where brittle structures with NW-SE and E-W directions denote the action of neotectonic transtensional stress. The comprehension of evolutionary geologic history allied to fracturing analysis proved to be an efficient and a low cost technique, which is adequate for selecting areas for further developments using more expensive methods.A produtividade dos poços tubulares profundos em terrenos cristalinos é extremamente variável e depende, além das propriedades intrínsecas da rocha, de fatores externos a ela. Na bacia do rio Jundiaí, Região Sudeste do Brasil, a existência de descontinuidades abertas em situações geológicas favoráveis à recarga constitui o principal fator que influencia a produtividade dos poços. Nesta área, zonas de cisalhamento e zonas de falhas pré-cambrianas reativadas ao longo do tempo geológico controlam a compartimentação morfoestrutural e a deposição de sedimentos cenozóicos. O cruzamento do mapa estrutural com os dados dos poços que explotam o Sistema Aqüífero Cristalino mostrou que poços com produtividade elevada em relação aos demais concentram

Optimising inflow performance of a long multi-lateral offshore well in low permeability, gas-bearing sandstone: K14-FB 102 case study

Energy Technology Data Exchange (ETDEWEB)

Hands, N. [Shell Canada Ltd., Calgary, AB (Canada); Francis, P. [Shell International Exploration and Production (Netherlands); Whittle, A.; Rajasingam, D. [NAM B. V. (Netherlands)

1998-12-31

Successful completion of the sub-horizontal dual-lateral well, K14-FB 102, to optimize production capacity and reservoir drainage in an offshore gas play in the Dutch sector of the North Sea is described. The two 5-7/8 inch horizontal production intervals were drilled and completed using a rheologically engineered, minimal solids, non-damaging sodium formate brine- based fluid designed as a drill-in fluid for reservoir intervals. The completion was made possible by the selection of the appropriate reservoir drill-in and completion fluid, appropriate level of contingency planning and a fully integrated team approach and custom-made well solution. Inflow performance has matched the performance of cemented and high-performance wells at a much lower cost. It was found that openhole reservoir completion techniques offer relatively inexpensive `fit-for-purpose` well solutions for low permeability sandstone in this region of the North Sea.3 refs., 6 tabs., 7 figs.

Rapid analysis of fungal cultures and dried figs for secondary metabolites by LC/TOF-MS

Energy Technology Data Exchange (ETDEWEB)

Senyuva, Hamide Z. [Ankara Test and Analysis Laboratory, Scientific and Technological Research Council of Turkey, Ankara 06330 (Turkey)], E-mail: hamide.senyuva@tubitak.gov.tr; Gilbert, John [Central Science Laboratory, Sand Hutton, York YO41 1LZ (United Kingdom); Oztuerkoglu, Sebnem [Ankara Test and Analysis Laboratory, Scientific and Technological Research Council of Turkey, Ankara 06330 (Turkey)

2008-06-09

A liquid chromatography-time-of-flight mass spectrometry (LC/TOF-MS) method has been developed for profiling fungal metabolites. The performance of the procedure in terms of mass accuracy, selectivity (specificity) and repeatability was established by spiking aflatoxins, ochratoxins, trichothecenes and other metabolites into blank growth media. After extracting, and carrying out LC/TOF-MS analysis, the standards were correctly identified by searching a specially constructed database of 465 secondary metabolites. To demonstrate the viability of this approach 11 toxigenic and four non-toxigenic fungi from reference collections were grown on various media, for 7-14 days. The method was also applied to two toxigenic fungi, A. flavus (200-138) and A. parasiticus (2999-465) grown on gamma radiation sterilised dried figs, for 7-14 days. The fungal hyphae plus a portion of growth media or portions of dried figs were solvent extracted and analysed by LC/TOF-MS using a rapid resolution microbore LC column. Data processing based on cluster analysis, showed that electrospray ionization (ESI)-TOF-MS could be used to unequivocally identify metabolites in crude extracts. Using the elemental metabolite database, it was demonstrated that from culture collection isolates, anticipated metabolites. The speed and simplicity of the method has meant that levels of these metabolites could be monitored daily in sterilised figs. Over a 14-day period, levels of aflatoxins and kojic acid maximised at 5-6 days, whilst levels of 5-methoxysterigmatocystin remained relatively constant. In addition to the known metabolites expected to be produced by these fungi, roquefortine A, fumagillin, fumigaclavine B, malformins (peptides), aspergillic acid, nigragillin, terrein, terrestric acid and penicillic acid were also identified.

Benefits of obtaining log data in horizontal wells in the WCSB

Energy Technology Data Exchange (ETDEWEB)

Spratt, D. [Reeves Wireline Technologies Ltd., Calgary, AB (Canada)

2001-11-01

A Compact Memory Logging (CML) system developed by Reeves Wireline Technologies was presented. It can be used to obtain log data from horizontal wells to get a better understanding of how to enhance production or completion techniques. The methods that are commonly used to obtain data from horizontal wells include measurement while drilling (MWD), logging while drilling (LWD), wet connect pipe conveyed wireline logging and CML. Each method has its unique benefits that range from information on lithology, rock parameters and fluid interfaces. Reeves has been using wireless pipe conveyed CML over the past two years. The log data includes array induction, dual spaced neutron and photo density porosity, Pe, gamma ray, compensated sonic and hose size caliper. Reeves CML is smaller, easily conveyed and has an unprecedented capability to bend and is considered to be well suited for both newly and previously drilled horizontal wells that require remedial assessment. The tool can be used to determine reservoir quality and boundaries, establish zone structures, or identify fluid interfaces for strategic planning of completions and stimulations. This paper presented examples of logs on some horizontal wells that indicate the value of obtaining log data. Reeves CML is considered to be economically and operationally ideal, particularly since data from the CML includes depth of investigation. 5 figs.

Characterization of interfaces in semimagnetic quantum wells

Energy Technology Data Exchange (ETDEWEB)

Schmitt, G.; Kuhn-Heinrich, B.; Zehnder, U.; Ossau, W.; Litz, T.; Waag, A.; Landwehr, G. [Physikalishes Institut der Universitaet Wuerzburg am Hubland, Wuerzburg (Germany)

1995-12-31

The interfaces between nonmagnetic CdTe quantum wells and semimagnetic barriers of Cd{sub 1-x}Mn{sub x}Te were investigated for several well widths by low temperature photoluminescence and photoluminescence excitation spectroscopy. Specially designed Cd{sub 1-x}Mn{sub x}/CdTe/Cd{sub 1-y} Mg{sub y}Te structures enable us to distinguish the quality of semimagnetic normal and inverted interfaces. The normal interface shows to better structural quality than the inverted interface. (author). 5 refs, 2 figs, 1 tab.

Purification and autolysis of the ficin isoforms from fig (Ficus carica cv. Sabz) latex.

Science.gov (United States)

Zare, Hamid; Moosavi-Movahedi, Ali Akbar; Salami, Maryam; Mirzaei, Morteza; Saboury, Ali Akbar; Sheibani, Nader

2013-03-01

Ficin (EC 3.4.22.3), a cysteine endoproteolytic protease in fig trees' latex, has multiple isoforms. Until now, no data on autolysis of individual ficins (ficin isoforms) are available. Following purification, ficins' autolysis was determined by HPLC chromatogram changes and ultrafiltrations at different temperatures and storage times. These results showed that the number of HPLC peaks in latex proteins purification of Ficus carica cv. Sabz varied from previous fig varieties or cultivars. Proteolytic activity of ficins was inhibited by specific cysteine protease inhibitors, confirming the participation of the cysteine residue in the active site. The zeta potential of the first two eluted peaks (I and II) was negative, while that of other peaks were positive. All ficins were susceptible to autolysis when stored at high temperatures. In contrast, only the last two ficins (B, C) were prone to autolysis at cold temperature after long storage period. The rate of degradation of the ficins was significantly increased with the increased storage time. The ficin (A) related to peak (III) had the highest and the lowest surface hydrophobic patches and ratio of autolytic to proteolytic activity, respectively. Copyright © 2012 Elsevier Ltd. All rights reserved.

Essentials for profitable coalbed methane production in the UK

Energy Technology Data Exchange (ETDEWEB)

Creel, J.C.; Rollins, J.B. [Cawley, Gillespie & Associates, Inc. (United Kingdom)

1995-12-31

The UK coalbed methane industry is now poised for a continuation of its growth. For this potential growth to be realized, coalbed methane production must be profitable for producers. Commercial viability of coalbed methane production in the UK depends on th fulfilment of essential technical, regulatory, and economic conditions. Technically, coalbed methane reservoirs must have an adequate thickness of permeable gas saturated coal. The regulatory environment must offer favorable treatment regarding taxation, royalties, and policies on well spacing, wellsite locations, and market accessibility. Economically, gas prices and initial capital costs must be sufficiently favorable to yield an acceptable rate of return. If these essential conditions can be fulfilled, UK coalbed methane production can be expected to be a commercially viable industry. 6 refs., 6 figs., 2 tabs.

Fuel from farms: A guide to small-scale ethanol production: Second edition

Energy Technology Data Exchange (ETDEWEB)

1982-05-01

This guide presents the current status of on-farm fermentation ethanol production as well as an overview of some of the technical and economic factors. Tools such as decision and planning worksheets and a sample business plan for use in exploring whether or not to go into ethanol production are given. Specifics in production including information on the raw materials, system components, and operational requirements are also provided. Recommendation of any particular process is deliberately avoided because the choice must be tailored to the needs and resources of each individual producer. The emphasis is on providing the facts necessary to make informed judgments. 98 refs., 14 figs., 9 tabs.

Field data provide estimates of effective permeability, fracture spacing, well drainage area and incremental production in gas shales

KAUST Repository

Eftekhari, Behzad

2018-05-23

About half of US natural gas comes from gas shales. It is valuable to study field production well by well. We present a field data-driven solution for long-term shale gas production from a horizontal, hydrofractured well far from other wells and reservoir boundaries. Our approach is a hybrid between an unstructured big-data approach and physics-based models. We extend a previous two-parameter scaling theory of shale gas production by adding a third parameter that incorporates gas inflow from the external unstimulated reservoir. This allows us to estimate for the first time the effective permeability of the unstimulated shale and the spacing of fractures in the stimulated region. From an analysis of wells in the Barnett shale, we find that on average stimulation fractures are spaced every 20 m, and the effective permeability of the unstimulated region is 100 nanodarcy. We estimate that over 30 years on production the Barnett wells will produce on average about 20% more gas because of inflow from the outside of the stimulated volume. There is a clear tradeoff between production rate and ultimate recovery in shale gas development. In particular, our work has strong implications for well spacing in infill drilling programs.

Deep learning and data assimilation for real-time production prediction in natural gas wells

NARCIS (Netherlands)

Loh, K.K.L.; Shoeibi Omrani, P.S.; Linden, R.J.P. van der

2018-01-01

The prediction of the gas production from mature gas wells, due to their complex end-of-life behavior, is challenging and crucial for operational decision making. In this paper, we apply a modified deep LSTM model for prediction of the gas flow rates in mature gas wells, including the uncertainties

Self-reported sitting time and physical activity: interactive associations with mental well-being and productivity in office employees.

Science.gov (United States)

Puig-Ribera, Anna; Martínez-Lemos, Iván; Giné-Garriga, Maria; González-Suárez, Ángel Manuel; Bort-Roig, Judit; Fortuño, Jesús; Muñoz-Ortiz, Laura; McKenna, Jim; Gilson, Nicholas D

2015-01-31

Little is known about how sitting time, alone or in combination with markers of physical activity (PA), influences mental well-being and work productivity. Given the need to develop workplace PA interventions that target employees' health related efficiency outcomes; this study examined the associations between self-reported sitting time, PA, mental well-being and work productivity in office employees. Descriptive cross-sectional study. Spanish university office employees (n = 557) completed a survey measuring socio-demographics, total and domain specific (work and travel) self-reported sitting time, PA (International Physical Activity Questionnaire short version), mental well-being (Warwick-Edinburg Mental Well-Being Scale) and work productivity (Work Limitations Questionnaire). Multivariate linear regression analyses determined associations between the main variables adjusted for gender, age, body mass index and occupation. PA levels (low, moderate and high) were introduced into the model to examine interactive associations. Higher volumes of PA were related to higher mental well-being, work productivity and spending less time sitting at work, throughout the working day and travelling during the week, including the weekends (p employees, higher sitting times on work days and occupational sitting were associated with decreased mental well-being (p employees. Employees' PA levels exerts different influences on the associations between sitting time, mental well-being and work productivity. The specific associations and the broad sweep of evidence in the current study suggest that workplace PA strategies to improve the mental well-being and productivity of all employees should focus on reducing sitting time alongside efforts to increase PA.

Charm production in two-photon collisions

International Nuclear Information System (INIS)

Linde, F.L.

1988-01-01

The analysis focuses on the production of charmonium resonances η c , χ 0 and χ 2 in two-photon interactions. The measurement of the inclusive production of charged D* mesons is described. 97 refs.; 54 figs.; 15 tabs

Consumption of fig fruits grown in Oman can improve memory, anxiety, and learning skills in a transgenic mice model of Alzheimer's disease.

Science.gov (United States)

Subash, Selvaraju; Essa, Musthafa Mohamed; Braidy, Nady; Al-Jabri, Ahood; Vaishnav, Ragini; Al-Adawi, Samir; Al-Asmi, Abdullah; Guillemin, Gilles J

2016-12-01

Alzheimer disease (AD) is one of the most common forms of dementia in the elderly. Several reports have suggested neurotoxic effects of amyloid beta protein (Aβ) and role of oxidative stress in AD. Figs are rich in fiber, copper, iron, manganese, magnesium, potassium, calcium, vitamin K, and are a good source of proanthocyanidins and quercetin which demonstrate potent antioxidant properties. We studied the effect of dietary supplementation with 4% figs grown in Oman on the memory, anxiety, and learning skills in APPsw/Tg2576 (Tg mice) mice model for AD. We assessed spatial memory and learning ability, psychomotor coordination, and anxiety-related behavior in Tg and wild-type mice at the age of 4 months and after 15 months using the Morris water maze test, rota-rod test, elevated plus maze test, and open-field test. Tg mice that were fed a control diet without figs showed significant memory deficits, increased anxiety-related behavior, and severe impairment in spatial, position discrimination learning ability, and motor coordination compared to the wild-type control mice on the same diet, and Tg mice fed on 4% fig diet supplementation for 15 months. Our results suggest that dietary supplementation of figs may be useful for the improvement of cognitive and behavioral deficits in AD.

Production process and quality control for the HTTR fuel

International Nuclear Information System (INIS)

Yoshimuta, S.; Suzuki, N.; Kaneko, M.; Fukuda, K.

1991-01-01

Development of the production and inspection technology for High Temperature Engineering Test Reactor (HTTR) fuel has been carried out by cooperative work between Japan Atomic Energy Research Institute (JAERI) and Nuclear Fuel Industries, Ltd (NFI). The performance and the quality level of the developed fuel are well established to meet the design requirements of the HTTR. For the commercial scale production of the fuel, statistical quality control and quality assurance must be carefully considered in order to assure the safety of the HTTR. It is also important to produce the fuel under well controlled process condition. To meet these requirements in the production of the HTTR fuel, a new production process and quality control system is to be introduced in the new facilities. The main feature of the system is a computer integrated control system. Process control data at each production stage of products and semi-products are all gathered by terminal computers and processed by a host computer. The processed information is effectively used for the production, quality and accountancy control. With the aid of this system, all the products will be easily traceable from starting materials to final stages and the statistical evaluation of the quality of products becomes more reliable. (author). 8 figs

Ensuring full-capacity production in case of liquid loading in gas wells; Aufrechterhalten der Produktion aus verwaessernden Erdgasbohrungen

Energy Technology Data Exchange (ETDEWEB)

Reinicke, K.M. [Technische Univ. Clausthal (Germany). Inst. fuer Erdoel- und Erdgastechnik; Albrecht, I. [Schlumberger Holding GmbH, Hannover (Germany); Thurow, M. [ILF Consulting Engineers, Muenchen (Germany)

2007-09-13

In the late production stages, water production from natural gas wells may become a problem that may require abandoning the well, thus losing valuable productive assets. In a joint project of organisations of the Deutsche Wissenschaftliche Gesellschaft fuer Erdoel, Erdgas und Kohle, a status report was made in 2005, and best practice methods for dewatering natural gas wells were identified. This contribution presents some of the results: common methods for improved liquid unloading from natural gas wells, preconditions for their application, experience of the industries in this field, elements of the selection and planning process, and an outlook. (orig.)

Produção da figueira em ambiente protegido submetida a diferentes épocas de poda e número de ramos Fig-growing under protecting environment, submited to different pruning times and number of branches

Directory of Open Access Journals (Sweden)

Alexandre Augusto Nienow

2006-12-01

Full Text Available A produção de figos para consumo in natura, no sul do Brasil, é limitada pelas chuvas, que causam elevadas perdas por podridão. O uso da poda drástica, por sua vez, retarda o início da colheita e as baixas temperaturas impedem o crescimento e a maturação dos frutos a partir do início do outono. O cultivo da figueira está sendo estudado em ambiente protegido como tecnologia para ampliar o período de colheita, elevar a produtividade e minimizar perdas de frutos. Figueiras cv. Roxo de Valinhos foram cultivadas em ambiente protegido dotado de sistema de irrigação por gotejamento e submetidas a três épocas de podas, no segundo e terceiro ciclos vegetativos (15 de maio, 10 de agosto e 5 de outubro. As plantas foram conduzidas, no segundo ciclo, com 4 e 8 ramos por planta, espaçadas de 0,75 m x 1,90 m e de 1,50 m x 1,90 m, respectivamente, e, no terceiro ciclo, com 6 e 12 ramos por planta, nos respectivos espaçamentos. O delineamento experimental foi com quatro blocos casualizados, os tratamentos dispostos em faixa e duas plantas úteis por parcela. O cultivo do figo em ambiente protegido e com fertirrigação é tecnicamente viável na região de Passo Fundo - RS. A produção obtida é equivalente a 41 t.ha-1 e 43 t.ha-1 no segundo e terceiro ciclos de cultivo, respectivamente. A poda realizada no início de agosto e as plantas conduzidas com 8 a 12 ramos, no espaçamento de 1,50 m x 1,90 m, favoreceram a taxa de frutificação, a produção por planta e por área, além de maior período de colheita. O sistema de cultivo de figo em ambiente protegido foi eficiente em prevenir perdas por rachaduras e podridões de frutos.Production of fresh fig (Carica ficus L. fruits, in the south of Brazil, is limited by drastic rains that cause high losses of mature figs. Drastic pruning delays the beginning of the harvest and low temperatures hinder growth and maturation of fruits in the beginning of autumn. Fig-growing is being studied under

Productivity and injectivity of horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Aziz, Khalid

2000-03-06

One of the key issues addressed was pressure drop in long horizontal wells and its influence on well performance. Very little information is available in the literature on flow in pipes with influx through pipe walls. Virtually all of this work has been in small diameter pipes and with single-phase flow. In order to address this problem new experimental data on flow in horizontal and near horizontal wells have been obtained. Experiments were conducted at an industrial facility on typical 6 1/8 ID, 100 feet long horizontal well model. The new data along with available information in the literature have been used to develop new correlations and mechanistic models. Thus it is now possible to predict, within reasonable accuracy, the effect of influx through the well on pressure drop in the well.

Low parameter model to monitor bottom hole pressure in vertical multiphase flow in oil production wells

Directory of Open Access Journals (Sweden)

Mohammad Ali Ahmadi

2016-09-01

Full Text Available The importance of the flow patterns through petroleum production wells proved for upstream experts to provide robust production schemes based on the knowledge about flow behavior. To provide accurate flow pattern distribution through production wells, accurate prediction/representation of bottom hole pressure (BHP for determining pressure drop from bottom to surface play important and vital role. Nevertheless enormous efforts have been made to develop mechanistic approach, most of the mechanistic and conventional models or correlations unable to estimate or represent the BHP with high accuracy and low uncertainty. To defeat the mentioned hurdle and monitor BHP in vertical multiphase flow through petroleum production wells, inventive intelligent based solution like as least square support vector machine (LSSVM method was utilized. The evolved first-break approach is examined by applying precise real field data illustrated in open previous surveys. Thanks to the statistical criteria gained from the outcomes obtained from LSSVM approach, the proposed least support vector machine (LSSVM model has high integrity and performance. Moreover, very low relative deviation between the model estimations and the relevant actual BHP data is figured out to be less than 6%. The output gained from LSSVM model are closed the BHP while other mechanistic models fails to predict BHP through petroleum production wells. Provided solutions of this study explicated that implies of LSSVM in monitoring bottom-hole pressure can indicate more accurate monitoring of the referred target which can lead to robust design with high level of reliability for oil and gas production operation facilities.

Sound the alarm : monitoring system's real-time data reduces well downtime

Energy Technology Data Exchange (ETDEWEB)

Harrison, L.

2008-10-15

This article presented a new electrical heating element tool used to boost performance at low-producing wells. The down hole tool (DHT) was designed to generate steam underground in order to avoid the energy losses associated with above-ground equipment. The tool operates like an oven element but is connected to a computerized well-monitoring system in order to ensure that heat is evenly distributed. The DHT is equipped with an Optiview monitoring system designed to provide continuous readouts of near real time data. The system can also be customized to deliver messages to telephones, computers, or alarm systems. Changes in hydraulic torque, flow rates, tank levels, speeds, temperatures and hydraulic pressures can be set within ranges in order to optimize oil and gas well production by reducing operating costs and increasing equipment efficiencies. Use of the tool has during tests has minimized the need for well servicing. The patent pending technology is also being investigated for its use in water disposal and other pump-to-surface units. It was concluded that use of the technology will allow oil and gas managers to determine the status of wells in remote locations. 1 fig.

Canadian Petroleum Products Inst. annual report, 1991

International Nuclear Information System (INIS)

1992-01-01

The Canadian Petroleum Products Institute (CPPI) was created in 1989 as a nonprofit association of Canadian refiners and marketers of petroleum products. In 1991, the Atlantic Petroleum Association, the Quebec Petroleum Association, the Ontario Petroleum Association, the Canada West Petroleum Association, and the Petroleum Association for Conservation of the Canadian Environment (PACE) were integrated into the CPPI. The objective of the CPPI is to serve and represent the refining and marketing sectors of the petroleum industry with respect to environment, health and safety, and business issues. An industry overview is provided, as well as highlights of environmental achievements and challenges, and economics and operations for the year. Lists of CPPI publications, standing committees, and officers are also included. 9 figs

Effect of completion geometry and phasing on single-phase liquid flow behaviour in horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Yuan, H.; Sarica, C.; Brill, P. [Tulsa Unov., OK (United States)

1998-12-31

The effects of completion geometries and the phasing and density of injection openings in horizontal wells was studied. A total of 1,257 tests were conducted for no fluid injections, no main flow at the test section inlet, and with fluid injection for Reynolds numbers ranging from 4,000 to 60,000 and for influx to main flow rate ratios ranging from 1/5 to 1/2000. Results demonstrated the dramatic effects of completion geometry, phasing density, Reynolds number and main flow rate on the pressure behaviour and therefore on the production behaviour of the well. A general friction factor expression for horizontal wells with multiple injection openings was developed based on the conservation of mass and momentum and using a commercial Computational Fluid Dynamics (CFD) computer program to determine the length of the flow developing region in a horizontal well. A field example is presented to show the importance of using the proper friction factor correlation to calculate the pressure drop in a horizontal well. 32 refs., 4 tabs., 20 figs.

Environmentally-friendly product development: methods and tools

National Research Council Canada - National Science Library

Abele, Eberhard; Anderl, R; Birkhofer, Herbert

2005-01-01

... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

7 CFR 457.110 - Fig crop insurance provisions.

Science.gov (United States)

2010-01-01

... of quarantine, boycott, or refusal of any entity to accept production. 11. Settlement of Claim (a) We... to abandon and no longer care for if you and we agree on the appraised amount of production. Upon... the appraised amount of production is not reached: (A) We may require you to continue to care for the...

Increasing gas producer profitability with virtual well visibility via an end-to-end wireless Internet gas monitoring system

Energy Technology Data Exchange (ETDEWEB)

McDougall, M. [Northrock Resources Ltd., Calgary, AB (Canada); Benterud, K. [Zed.i solutions, Calgary, AB (Canada)

2003-07-01

This PowerPoint presentation describes how Northrock Resources Ltd. increased profitability using Smart-Alek{sup TM} while avoiding high implementation costs. Smart-Alek is a new type of fully integrated end-to-end electronic gas flow measurement (GFM) system based on Field Intelligence Network and End User Interference (FINE). Smart-Alek can analyze gas production through public wireless communications and a web-browser delivery system. The system has enabled Northrock to increase gas volumes with more accurate measurement and reduced downtime. In addition, operating costs have decreased because the frequency of well visits has been reduced and the administrative procedures of data collection is more efficient. The real-time well visibility of the tool has proven to be very effective in optimizing business profitability. 7 figs.

Horizontal well technology in the oilfield of China

Energy Technology Data Exchange (ETDEWEB)

Xiange, L.; Shangqi, L.; Zhixiang, J. [Research Institute of Petroleum Exploration and Development (China)

1998-12-31

The current state of horizontal well development and enhanced recovery technology in the onshore oilfields of China is described. The paper includes discussion of technology developed for light oil reservoirs, heavy oil reservoirs with thermal recovery, low permeability reservoirs and high water flooding reservoirs. Examples of various applications of the technology are described. 3 refs., 5 tabs., 11 figs.

Heavy quark production

International Nuclear Information System (INIS)

Rossi, L.; Genoa Univ.

1992-01-01

The hadro- and photo-production of charm and beauty particles are reviewed. The most recent experimental results on charm are compared with the next-to-leading order perturbative QCD calculations as a check of the theory. Results on beauty production at hadronic colliders are presented and indicate that these machines may also be regarded as beauty factories. (author) 21 refs.; 18 figs.; 2 tabs

Complete sequence of Fig fleck-associated virus, a novel member of the family Tymoviridae.

Science.gov (United States)

Elbeaino, Toufic; Digiaro, Michele; Martelli, Giovanni P

2011-11-01

The complete nucleotide sequence and the genome organization were determined of a novel virus, tentatively named Fig fleck-associated virus (FFkaV). The viral genome is a positive-sense, single-stranded RNA 7046 nucleotides in size excluding the 3'-terminal poly(A) tract, and comprising two open reading frames. ORF1 encodes a polypeptide of 2161 amino acids (p240), which contains the signatures of replication-associated proteins and the coat protein cistron (p24) at its 3' end. ORF2 codes for a 461 amino acid protein (p50) identified as a putative movement proteins (MP). In phylogenetic trees constructed with sequences of the putative polymerase and CP proteins FFkaV consistently groups with members of the genus Maculavirus, family Tymoviridae. However, the genome organization diverges from that of the two completely sequenced maculaviruses, Grapevine fleck virus (GFkV) and Bombix mori Macula-like virus (BmMLV), as it exhibits a structure resembling that of Maize rayado fino virus (MRFV), the type species of the genus Marafivirus and of Olive latent virus 3 (OLV-3), an unclassified virus in the family Tymoviridae. FFkaV was found in field-grown figs from six Mediterranean countries with an incidence ranging from 15% to 25%. Copyright © 2011 Elsevier B.V. All rights reserved.

SELECTION AND TREATMENT OF STRIPPER GAS WELLS FOR PRODUCTION ENHANCEMENT, MOCANE-LAVERNE FIELD, OKLAHOMA

Energy Technology Data Exchange (ETDEWEB)

Scott Reeves; Buckley Walsh

2003-08-01

In 1996, Advanced Resources International (ARI) began performing R&D targeted at enhancing production and reserves from natural gas fields. The impetus for the effort was a series of field R&D projects in the early-to-mid 1990's, in eastern coalbed methane and gas shales plays, where well remediation and production enhancement had been successfully demonstrated. As a first step in the R&D effort, an assessment was made of the potential for restimulation to provide meaningful reserve additions to the U.S. gas resource base, and what technologies were needed to do so. That work concluded that: (1) A significant resource base did exist via restimulation (multiples of Tcf). (2) The greatest opportunities existed in non-conventional plays where completion practices were (relatively) complex and technology advancement was rapid. (3) Accurate candidate selection is the greatest single factor that contributes to a successful restimulation program. With these findings, a field-oriented program targeted at tight sand formations was initiated to develop and demonstrate successful candidate recognition technology. In that program, which concluded in 2001, nine wells were restimulated in the Green River, Piceance and East Texas basins, which in total added 2.9 Bcf of reserves at an average cost of $0.26/Mcf. In addition, it was found that in complex and heterogeneous reservoirs (such as tight sand formations), candidate selection procedures should involve a combination of fundamental engineering and advanced pattern recognition approaches, and that simple statistical methods for identifying candidate wells are not effective. In mid-2000, the U.S. Department of Energy (DOE) awarded ARI an R&D contract to determine if the methods employed in that project could also be applied to stripper gas wells. In addition, the ability of those approaches to identify more general production enhancement opportunities (beyond only restimulation), such as via artificial lift and compression

Production of mineral ash-wool

International Nuclear Information System (INIS)

Micevic, Z.; Djekic, S.

1996-01-01

The project entitled 'Production of Mineral Ash-Wool' presents a new technology of possible use of the fly ash, generated as a waste product from the fossil fueled power plants, as a basic raw material for manufacturing of different products from a new mineral ash-wool. The wide area of mineral ash-wool application (civil engineering, industry, power generation, etc.) and the advantages of this new technology (important raw material obtained free of charge, substitution of expensive silicate stone, use of electric energy for melting instead for coke, vicinity of factory location close to the fossil fueled power plant, lower product price, reduction of environmental pollution, etc.) have resulted in the performance of the bench scale tests. Positive results have been obtained, as a good initial base for the realization of this project. The named study as an detailed analysis has been carried out for the assessment of: supply and sales market, analysis of possible and selection of an optimal location of the factory in the frame of fossil fueled power plant 'Kosovo', selection of the production capacity and alternative preliminary technical designs of the factory for the mineral ash-wool production. For the studied alternatives, specifications and capital investments evaluations for equipment and works (mechanical, civil engineering and electromechanical part) have been made as well as assessments of production costs. Based on the performed economical and financial analyses, as well as the sensitivity analyses one could be concluded that the investments in the factory for the mineral ash-wool production is highly economically acceptable. (author). 1 fig., 1 tab., 3 refs

Utilization of agro-based industrial by-products for biogas production in Vietnam

Energy Technology Data Exchange (ETDEWEB)

Ngoc, U.N.; Schnitzer, H. [Graz Univ. of Technology, (Austria). Inst. for Resource Efficient and Sustainable Systems; Berghold, H. [Joanneum Research Inst. for Sustainable Techniques and Systems (Austria)

2007-07-01

Due to the rapid rates of urbanization occurring in many countries in the world, the importance of an efficient and effective solid waste management system and the utilization/reuse of waste are more critical than ever before, especially for agricultural residues and agro-based industrial by-products. Over the past decade, the amount of solid waste generated in Vietnam has been increasing steadily. Numbers are predicted to continue to increase as well. There is significant potential to use the large amount of wastes for biogas conversion processes and for further production of commercial energy. This paper presented starts with estimation and analysis of the amounts of organic waste, agricultural residues, and agro-based industrial by-products generated from food industrial processes using general data sources for Vietnam. A laboratory study examined the use of agro-based industrial by-products and agricultural residues from cassava, sweet potato, pineapple residues, organic wastes, manures as input materials for biogas production in the anaerobic process. This paper provided an overview of Vietnam as a country, as well as a general overview of the amount of organic waste generated in the country. It also discussed the fermentation tests that were conducted to find out the potential of biogas production from some residues. It was concluded that a significant portion of waste could be reused as an environmentally sound source of energy. The utilization of agricultural residues and industrial byproducts as input materials for biogas production will not only reduce the quantity of organic waste thrown into landfills, but also reduce the negative impact on the environment. 10 refs., 7 tabs., 7 figs.

Optimizing the productivity of acid-fracture treatments in horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Allen, E.

1995-12-31

Existing prediction methods are inadequate for unstable radial displacement, with prediction errors of up to 500%. This work provides a new theoretical basis for understanding unstable displacements in both Newtonian and non-Newtonian fluids, based on a detailed analysis of the fingering morphology and a new derivation using fractional flow theory for radial flow. Design guidelines are given to assist in optimizing the design of fingered acid-fracture treatments for horizontal wells in carbonate formations. Unstable radial displacement creates power-law (fractal) displacement patterns, for a wide range of mobility ratios, and the displacement efficiency can be expressed as a function of the mobility ratio M. The finger wavelength is a function of the Peclet number and the fracture aperture, and the detailed morphology can be understood in terms of the fluid theology. The size of the fingering zone can be predicted from the mobility ratio and Peclet number. A productivity index factor PIF can be used to compare different treatment scenarios, and thus optimise the productivity of acid-fracture treatments.

Experimental investigation into methane hydrate production during three-dimensional thermal stimulation with five-spot well system

International Nuclear Information System (INIS)

Wang, Yi; Li, Xiao-Sen; Li, Gang; Zhang, Yu; Li, Bo; Chen, Zhao-Yang

2013-01-01

Highlights: • The production behaviors of methane hydrate are obtained in the 3-D simulator. • The thermal stimulation method with a five-spot well is used for hydrate production. • The water and gas production, efficiency, recovery, production rate are analyzed. • The effect of injection rate change on the production behavior is investigated. - Abstract: The cubic hydrate simulator (CHS) is used to study the methane hydrate production behaviors in porous media by the thermal stimulation with a five-spot well system. The hot water injection rates range from 10.0 to 40.0 ml/min. The thermal stimulation process is analyzed, and the conclusions are that the hydrate decomposition boundary moves from the central point to the surroundings gradually and finally covers almost the entire hydrate field in the CHS during the thermal stimulation process. The heat conduction plays a more significant role than the convection for the heat diffusion in the thermal stimulation process. The increasing injection rate of the hot water enhances the rate of hydrate decomposition, shortens the production time, and decreases the water production volumes, while it has little influence on the final gas production volumes. Furthermore, the change of the hot water injection rate (R inj ) has little influence on the final gas recovery, however, the higher R inj leads to the higher average production rate and the lower energy efficiency

Atmospheric production rate of 36Cl

International Nuclear Information System (INIS)

Parrat, Y.; Hajdas, W.; Baltensperger, U.; Synal, H.A.; Kubik, P.W.; Gaeggeler, H.W.; Suter, M.

1997-01-01

Using experimental cross sections, a new calculation of the atmospheric production rate of 36 Cl was carried out. A mean production rate of 20 atoms m -2 s -1 was obtained, which is lower than mean 36 Cl deposition rates. (author) 2 figs., 7 refs

Efeito da adubação com boro e esterco bovino sobre a produtividade da figueira e as propriedades químicas do solo Effect of boron and cattle manure fertilization on yield productivity fig tree and on soil properties

Directory of Open Access Journals (Sweden)

Luiz Carlos Santos Caetano

2006-08-01

Full Text Available O objetivo deste trabalho foi verificar o efeito da adubação da cultura da figueira com boro e esterco bovino sobre a produtividade de figos verdes e as propriedades químicas do solo. Os tratamentos foram cinco doses de ácido bórico (0, 20, 40, 60 e 100g planta-1 combinadas com dois níveis de adubação de esterco (sem esterco e 10kg de esterco/planta. O delineamento experimental foi o de blocos casualizados em esquema de parcelas subdivididas e quatro repetições. A adubação com ácido bórico não afetou a produtividade de figos, enquanto que o esterco bovino aumentou-a. Os teores de fósforo e potássio no solo aumentaram significativamente e o teor de alumínio diminuiu significativamente em função da adubação com esterco bovino. O teor de B no solo, extraído pelo método da água quente, aumentou linearmente em função das doses de ácido bórico.The objective of the present work was evaluate the effect of fig tree orchard fertilization with boron and cattle manure on the green fig yield and soil chemical properties. The treatments were five boric acid levels (0, 20, 40, 60 and 100g plant-1 combined with two cattle manure fertilization levels (without cattle manure and 10kg of cattle manure/plant. The experimental design was that of randomized blocks in a split-plot scheme and four repetitions. The boric acid fertilization did not affect the fig productivity whereas the cattle manure one increased it. The P and K content increased significantly and the Al content decreased significantly in function of the cattle manure fertilization. The B soil content, extracted by hot water methodology increased linearly in function of the boric acid levels.

Productive Activities and Subjective Well-Being among Older Adults: The Influence of Number of Activities and Time Commitment

Science.gov (United States)

Baker, Lindsey A.; Cahalin, Lawrence P.; Gerst, Kerstin; Burr, Jeffrey A.

2005-01-01

This study examines relationships among three measures of subjective well-being (life satisfaction, happiness and depressive symptoms), and two global measures of productive activity (number of activities and time commitment). We argue that participation in multiple productive activities should increase subjective well-being because these…

Production performance laws of vertical wells by volume fracturing in CBM reservoirs

Directory of Open Access Journals (Sweden)

Liehui Zhang

2017-05-01

Full Text Available Volume fracturing technology has been widely applied in the development of coalbed methane (CBM reservoirs. As for the stimulated reservoir volume (SRV created by volume fracturing, the seepage laws of fluids are described more accurately and rationally in the rectangular composite model than in the traditional radial composite model. However, the rectangular composite model considering SRV cannot be solved using the analytical or semi-analytical function method, and its solution from the linear flow model has larger errors. In view of this, SRV areas of CBM reservoirs were described by means of dual-medium model in this paper. The complex CBM migration mechanisms were investigated comprehensively, including adsorption, desorption, diffusion and seepage. A well testing model for rectangular composite fracturing wells in CBM reservoirs based on unsteady-state diffusion was built and solved using the boundary element method combined with Laplace transformation, Stehfest numerical inversion and computer programming technology. Thus, production performance laws of CBM reservoirs were clarified. The flow regimes of typical well testing curves were divided and the effects on change laws of production performance from the boundary size of gas reservoirs, permeability of volume fractured areas, adsorption gas content, reservoir permeability and SRV size were analyzed. Eventually, CBM reservoirs after the volume fracturing stimulation were described more accurately and rationally. This study provides a theoretical basis for a better understanding of the CBM migration laws and an approach to evaluating and developing CBM reservoirs efficiently and rationally.

The t quark production at the UNK collider energies general characteristics

International Nuclear Information System (INIS)

Kiselev, V.V.; Likhoded, A.K.; Petrov, V.A.; Slabospitsky, S.R.

1989-01-01

The cross sections and inclusive spectra for t quarks in pp-bar collisions at √s=6 TeV (in the UNK collider operational mode) have been calculated as well as different kinematic characteristics of the t-decay products. It is shown that at identical integrated luminosity the region of the maximum t quark masses that can be reached at the UNK collider is considerably beyond the t quark mass limit for the Tevatron (750-800 GeV for UNK and 400-450 GeV for the Tevatron). The role of some background processes to the t quark production reaction has also been treated. 9 refs.; 8 figs.; 3 tabs

Spectra and strangeness production

International Nuclear Information System (INIS)

Miake, Yasuo.

1990-01-01

Particle production (π ± , K ± and p ± ) has been measured in p + A and Si + A reactions using the E802 spectrometer. The comparison of the particle production (rapidity distributions, momentum distributions, and the integrated yields ratios) between p + Be, p + Au and central Si + Au collisions and the effects of rescattering is discussed. 14 refs., 6 figs

International uranium production. A South African perspective

International Nuclear Information System (INIS)

Sinclair-Smith, D.

1984-01-01

Between 1981 and 1983 South Africa experienced a decline in its uranium resources of 23% in the less than $80/kg U category and 12% in the less than $130/kg U category. In 1983 only $5 million was spent on exploration, with activities being concentrated in the Witwatersrand Basin as a byproduct of gold exploration. South Africa has maintained a production level of around 6000 mt U in 1981, 1982 and 1983. One unusual feature of the South African uranium scene is the ability to selectively dump relatively high grade uranium tailings after the extraction of gold and to rework this material as well as material dumped prior to the emergence of the uranium industry. Uranium from this source amounted to some 28% of total production in 1983. (L.L.) (2 tabs., 6 figs.)

IMPACT OF THE FERMENTATION PROCESS WITH IMMOBILIZED YEAST CELLS ON THE AROMA PROFILE AND SENSORY QUALITY OF DISTILLATES PRODUCED FROM TWO FIG (Ficus carica L. CULTIVARS

Directory of Open Access Journals (Sweden)

Borislav Miličević

2017-01-01

Full Text Available The aim of this research was to investigate the influence of immobilized cell fermentation on aroma and sensory characteristics of distillates produced from two fig varieties commonly grown in Croatia (Petrovača bijela and Petrovača crna. Distillate samples were produced both by classical and immobilized yeast fermentation technology. Aroma profile was determined using GC/FID and sensory analysis was conducted according to German DLG model. Results showed that immobilized cell technique gives distillates with higher ethanol and lower ester contents, but of higher sensory quality. It is a promising technique for production of high quality fruit distillates.

Bottonium production at LEP

International Nuclear Information System (INIS)

Abraham, K.J.

1989-03-01

The production of γ ('3S 1 ) and η b ( 1 S 0 ) with two gluons from Z decay is investigated. It is found that at LEP luminosities experimental detection will hardly be feasible. (author). 9 refs.; 1 fig

Multi-zone coupling productivity of horizontal well fracturing with complex fracture networks in shale gas reservoirs

Directory of Open Access Journals (Sweden)

Weiyao Zhu

2018-02-01

Full Text Available In this paper, a series of specific studies were carried out to investigate the complex form of fracture networks and figure out the multi-scale flowing laws of nano/micro pores–complex fracture networks–wellbore during the development of shale reservoirs by means of horizontal well fracturing. First, hydraulic fractures were induced by means of Brazilian splitting tests. Second, the forms of the hydraulic fractures inside the rock samples were observed by means of X-ray CT scanning to measure the opening of hydraulic fractures. Third, based on the multi-scale unified flowing model, morphological description of fractures and gas flowing mechanism in the matrix–complex fracture network–wellbore, the productivity equation of single-stage horizontal well fracturing which includes diffusion, slipping and desorption was established. And fourthly, a productivity prediction model of horizontal well multi-stage fracturing in the shale reservoir was established considering the interference between the multi-stage fracturing zones and the pressure drop in the horizontal wellbore. The following results were obtained. First, hydraulic fractures are in the form of a complex network. Second, the measured opening of hydraulic fractures is in the range of 4.25–453 μm, averaging 112 μm. Third, shale gas flowing in different shapes of fracture networks follows different nonlinear flowing laws. Forth, as the fracture density in the strongly stimulated zones rises and the distribution range of the hydraulic fractures in strongly/weakly stimulated zones enlarges, gas production increases gradually. As the interference occurs in the flowing zones of fracture networks between fractured sections, the increasing amplitude of gas production rates decreases. Fifth, when the length of a simulated horizontal well is 1500 m and the half length of a fracture network in the strongly stimulated zone is 100 m, the productivity effect of stage 10 fracturing is the

Rooting of hardwood cuttings of Roxo de Valinhos fig (Ficus carica L. with different propagation strategies

Directory of Open Access Journals (Sweden)

Gilmar Antônio Nava

2014-12-01

Full Text Available The objective of this study was to evaluate the substrate, cuttings collection time, the position and the cutting depth, and the propagation environment on rooting of 'Purple Valinhos' fig tree cuttings in Southwestern Paraná, Brazil. Two experiments were carried out at UTFPR, Câmpus Dois Vizinhos, with hardwoods cuttings from Roxo de Valinhos fig tree. The first experiment used a randomized block design, in 3 x 3 x 2 factorial (substrate x environment x collection time, with four replications of 10 cuttings per plot. The cuttings were collected in the first fifteen days of July and August. The substrates were sand, soil and the mixture of these [1:1 (v / v]. The environments used were open sky, tunnel with plastic cover and tunnel with half-shade black net cover. The second experiment used a randomized block design, 2 x 2 x 3 factorial (shoot cutting position x soil cover x shoot cutting depth, with four replications of 12 cuttings per plot. In the factor position, the vertically (0 º inclination and inclined (45 º inclination shoot cuttings were evaluated. Soil cover was tested with mulching plastic cover or not. The tested depths were 1/3, 1/2 and 2/3 in relation to the total length of the shoot cutting. In both experiments, the following were analyzed: rooting and mortality indices, number of leaves and primary shoots, length of the three largest roots per cutting. It was conclude that, the protected environment with plastic cover on sand as substrate must recommended for the rooting of fig estaca, collecting them in the first half of July. The inclination position and cutting depth of the estaca and the substrate coverage with plastic mulching did not influence the results.

The stimulating effects of polyphenol and protein fractions from jelly fig (Ficus awkeotsang Makino achenes against proliferation of leukemia cells

Directory of Open Access Journals (Sweden)

Yi-Zhen Shih

2017-10-01

Full Text Available This study aimed to investigate the direct and immune-stimulated antiproliferative activities of jelly fig achenes fractions including pectinesterase inhibitors, crude polyphenols extract, and purified polyphenols extract (PP. Beside the measurement of cell viability of U937, the quantity of cytokines in conditioned medium and morphologic changes in leukemia were observed. After surveying all fractions in jelly fig, the obtained fractions of polyphenol exhibited the highest stimulating effects and directly cytotoxic effects against leukemia with the lowest effect found in protein fractions. The leukemia treated by our PP fraction showed dose-dependent response between the concentration and G2/M cell numbers of the U937 cells. The PP fraction had more pronounced effect on immune-stimulated than direct antiproliferative activities. The finding was also supported by morphological analysis by showing the formation of apoptotic bodies and differentiation from immature U937 cells into mature monocytes/macrophages on cells cultured with PP-conditioned medium. In conclusion, polyphenol fraction of pectinesterase inhibitors from jelly fig showed the immune-stimulated antiproliferative activities against U937 cell.

Drilling and testing hot, high-pressure wells

Energy Technology Data Exchange (ETDEWEB)

MacAndrew, R. (Ranger Oil Ltd, Aberdeen (United Kingdom)); Parry, N. (Phillips Petroleum Company United Kingdom Ltd, Aberdeen (United Kingdom)); Prieur, J.M. (Conoco UK Ltd, Aberdeen (United Kingdom)); Wiggelman, J. (Shell UK Exploration and Production, Aberdeen (United Kingdom)); Diggins, E. (Brunei Shell Petroleum (Brunei Darussalam)); Guicheney, P. (Sedco Forex, Montrouge (France)); Cameron, D.; Stewart, A. (Dowell Schlumberger, Aberdeen (United Kingdom))

Meticulous planning and careful control of operations are needed to safely drill and test high-temperature, high-pressure (HTHP) wells. Techniques, employed in the Central Graben in the UK sector of the North Sea, where about 50 HTHP wells have been drilled, are examined. Three main areas of activity are covered in this comprehensive review: drilling safety, casing and cementation, and testing. The three issues at the heart of HTHP drilling safety are kick prevention, kick detection and well control. Kicks are influxes of reservoir fluid into the well. Test equipment and operations are divided into three sections: downhole, subsea and surface. Also details are given of how this North Sea experience has been used to help plan a jackup rig modification for hot, high-pressure drilling off Brunei. 16 figs., 32 refs.

Production of monozygotic twin calves using the blastomere separation technique and Well of the Well culture system.

Science.gov (United States)

Tagawa, M; Matoba, S; Narita, M; Saito, N; Nagai, T; Imai, K

2008-03-15

The present study was conducted to establish a simple and efficient method of producing monozygotic twin calves using the blastomere separation technique. To produce monozygotic twin embryos from zona-free two- and eight-cell embryos, blastomeres were separated mechanically by pipetting to form two demi-embryos; each single blastomere from the two-cell embryo and tetra-blastomeres from the eight-cell embryo were cultured in vitro using the Well of the Well culture system (WOW). This culture system supported the successful arrangement of blastomeres, resulting in their subsequent aggregation to form a demi-embryo developing to the blastocyst stage without a zona pellucida. There was no significant difference in the development to the blastocyst stage between blastomeres separated from eight-cell (72.0%) and two-cell (62.0%) embryos. The production rates of the monozygotic pair blastocysts and transferable paired blastocysts for demi-embryos obtained from eight-cell embryos (64.0 and 45.0%, respectively) were higher than those for demi-embryos obtained from two-cell embryos (49.0 and 31.0%, PWOW culture system, yielded viable monozygotic demi-embryos, resulting in high rates of pregnancy and twinning rates after embryo transfer.

Drilling and testing specifications for the McGee well

International Nuclear Information System (INIS)

Patterson, J.K.

1982-01-01

The McGee Well is a part of the Basalt Waste Isolation Project's subsurface site selection and characterization activities. Information from the McGee Well support site hydrologic characterization and repository design. These test specifications include details for the drilling and testing of the McGee. It includes the predicted stratigraphy, the drilling requirements, description of tests to be conducted, intervals selected for hydrologic testing, and a schedule of the drilling and testing activities. 19 refs., 10 figs., 7 tabs

Simulating cold production by a coupled reservoir-geomechanics model with sand erosion

Energy Technology Data Exchange (ETDEWEB)

Wang, Y.; Xue, S. [Petro-Geotech Inc., Calgary, AB (Canada)

2002-06-01

This paper presents a newly developed fully coupled reservoir-geomechanics model with sand erosion. Sand production occurs during aggressive production induced by the impact of viscous fluid flow and the in situ stress concentration near a wellbore, as well as by perforation tips in poorly consolidated formations. This compromises oil production, increases well completion costs, and reduces the life cycles of equipment down hole and on the surface. The proposed model can be used for sand production studies in conventional oil/gas reservoirs such as the North Sea as well as in heavy oil reservoirs such as in northwestern Canada. Instead of generating a high permeability network in reservoirs, the enhanced oil production is determined by the increase in the effective wellbore radius. This paper presents the general model. A detailed study on the capillary pressure and the impact of multiphase flow on sanding and erosion will be conducted at a later date. It appears that 2 phase flow can be important to elastoplasticity if no significant sand erosion has occurred. It was determined that high porosity is induced by erosion and capillary pressure. Two phase flow can be important when the built-up drag force carries sand-fluid slurry into the well. It is concluded that viscosity and flow velocity can help estimate the slurry transport, sand rate and enhanced oil production. 22 refs., 3 tabs., 11 figs.

Vertical-horizontal wells for depletion and sweep

Energy Technology Data Exchange (ETDEWEB)

Muraikhi, A. J.; Pham, T. R.; Liu, J. S.; Khatib, M. R.; Muhaish, A. S. [Saudi Aramco (Saudi Arabia)

1998-12-31

A well completion scheme currently in use in a thick, large, elongated carbonate anticline Middle-East oil reservoir is described. This method of well completion calls for a combination of an open hole horizontal section penetrating the top 10 feet of the reservoir and a cased or undisturbed vertical segment through the thick formation. The horizontal section is used for producing and the vertical segment is used for monitoring purposes. Field experience and supported reservoir simulation exercises have shown that the horizontal application is superior to conventional vertical completion both from the economic and from the sweep point of view. 4 refs., 12 figs.

Simulation of Rn-222 decay products concentration deposited on a filter. Description of radon1.pas computer program

International Nuclear Information System (INIS)

Machaj, B.

1996-01-01

A computer program allowing simulation of activity distribution of 222 Rn short lived decay products deposited on a filter against time is presented, for any radiation equilibrium degree of the decay products. Deposition of the decay products is simulated by summing discrete samples every 1/10 min in the sampling time from 1 to 10 min. The concentration (activity) of the decay products is computed in one minute intervals in the range 1 - 100 min. The alpha concentration and the total activity of 218 Po + 214 Po produced are computed in the range 1 to 100 min as well. (author). 10 refs, 4 figs

Geologic and operational summary, COST No. G-2 well, Georges Bank area, North Atlantic OCS

Science.gov (United States)

Amato, Roger V.; Simonis, Edvardas K.

1980-01-01

The Continental Offshore Stratigraphic Test (COST) No. G-2 well is the second deep well to be drilled in the Georges Bank Basin and the third in a series of COST wells on the Atlantic Outer Continental Shelf (OCS). The G-2 was drilled by Ocean Production Company, acting as the operator for 19 participating companies between January 6 and August 30, 1977. The semisubmersible rig Ocean Victory was used to drill the well to a depth of 21,874 feet at a location 132 statute miles east-southeast of Nantucket Island in 272 feet of water. An earlier deep Stratigraphic test, the COST No. G-l well, was drilled 42 statute miles west of the G-2 well, to a depth of 16,071 feet in 1976 (fig. 1). Geological and engineering data obtained from the well were used by companies and the U.S. Geological Survey (USGS) for evaluating the petroleum potential and possible drilling problems in the U.S. North Atlantic OCS area in preparation for lease sale 42 held on December 18, 1979. The Stratigraphic test was intentionally drilled away from any potential petroleum-bearing feature, but in a block bordering several tracts that were included in the sale area.

Applying integrated software to optimize corporate production performance: a case study at Suncor

International Nuclear Information System (INIS)

Masse, L.P.; Rhynes, P.

1997-01-01

The feasibility and need to introduce a central database of basic well data for use in the petroleum industry in order to enhance production performance was discussed. Suncor developed a central database of well data as the foundation for a future systems architecture for its own use. The perceived, current and future benefits of such a system were described. Suncor identified the need for a corporate repository which is accessible to multiple applications, and provides the opportunity to upgrade the system to new technology that will benefit from integration. The objective was to document existing data sets, identify what additional data would be useful and document existing processes around this well data. The integrated set of data is supplied by multiple vendors and includes public land data, production budget, public well data, forecasting, economics, drilling, procurement system, fixed assets, maintenance, land administration, field data capture, production accounting and financial accounting. In addition to being able to access the current well data, significant added value is expected from the pro-active communication within the departments, and the additional time available for analysis and decisions as opposed to searching for data and comparing sources. 4 figs

Economic analyse of industrial production and electric energy consumption on a sugar-alcohol plant; Analise economica da producao industrial e do consumo de energia eletrica em uma usina sucro-alcooleira

Energy Technology Data Exchange (ETDEWEB)

Bini, Aderson

1993-10-01

Economic aspects of industrial production of sugar cane and automotive alcohol fuel, the relation between its production and electric energy consumption, electric energy costs to self generated electric power and concessionary supply, involved in plant production on Ribeirao Preto, SP, Brazil, are presented. Studies to verify the relationships between sugar and alcohol production with milling ours as well as sugar cane processed with sugar and alcohol produced are also discussed 27 refs., 12 figs., 38 tabs.

Preliminary assessment of the waveform inversion method for interpretation of cross-well seismic data from the thermal production test, JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well

Energy Technology Data Exchange (ETDEWEB)

Watanabe, T. [Nagoya Univ., Nagoya (Japan). Research Center for Seismology and Volcanology; Shimizu, S. [Japan National Oil Co., Chiba (Japan); Asakawa, E. [JGI Inc., Tokyo (Japan); Kamei, R.; Matsuoka, T. [Kyoto Univ., Kyoto (Japan). Dept. of Civil and Earth Resources Engineering

2005-07-01

The JAPEX/JNOC/GSC et al. Mallik 3L-38 and 4L-38 test wells were subjected to repeated cross-well seismic surveys before and during the gas production test from the gas-hydrate-bearing layer at a depth of about 905 to 920 m. High-resolution velocity images in the gas-hydrate-bearing layer were obtained using the frequency-domain nonlinear waveform inversion method. An acoustic waveform inversion method was used along with the frequency-domain approach in order to detect the change in acoustic properties of the gas-hydrate-bearing layer resulting from gas production. The layered structures with small lateral heterogeneities were reconstructed by tomography analysis of preprocessed waveform data using a smaller number of source-receiver pairs. Preliminary results reveal high velocity and very high attenuation in the gas-hydrate-bearing layers. No obvious velocity decreases were noted. Information for further detailed processing was also gathered.

You've got 'scale' : developments in well-bore remediation technology

Energy Technology Data Exchange (ETDEWEB)

Zemlak, Z. [Schlumberger Canada Ltd., Calgary, AB (Canada); Kortash, B. [Amoco Canada Petroleum Co. Ltd., Calgary, AB (Canada)

2000-06-01

The Kaybob field Beaver Hill Lake formation in Central Alberta is an aquifer driven maturing gas reservoir with high concentrations of iron sulfide scale. This scale, in combination with a time layered asphaltenes has an impact on production. Since the scale forms on tubular walls and results in corrosion of metal, it also increases risks during well intervention. Past techniques to remove the scale have not proven to be successful. This study presents a newly developed Blaster scale removal system to clean tubings. Blaster techniques use high-pressure jetting in combination with special abrasives to remove extremely hard, inert scales without damaging the tubing or completion components. Amoco Canada has been involved in the continual improvement and modification of the method since its introduction in 1998. To date, a total of 19 wells have been completed, providing valuable data about the method. It was concluded that although iron sulfide scale is common throughout the gas reservoir, the composition and solubility varies from well to well. Amoco Canada has found that Blaster techniques are a safe, low risk method of cleaning coiled tubulars to known drift parameters, in areas where scale and corrosion have been uncontrollable. 5 refs., 2 tabs., 1 fig.

The Synthesis of 58co-Naphthenate Complex Compound for Evaluation of Oil well Production Capacity

International Nuclear Information System (INIS)

Duyeh Setiawan; Marlina

2009-01-01

The nuclear technique using radioisotope as a tracer in oil industry has assisted to solve the degradation of oil production. Usually, the degradation of oil production in well caused by the formation changing of hydrostatic pressure of the oil layer in the well. This problem could be evaluated by injection of water to oil well, for recovering this hydrostatic pressure. The watcher of the water injection success is done by the way of nuclear technique radioactive tracer systems, applied radioisotope having short half life and low gamma radiation energy. Radioisotope cobalt-58 in the complex form with naphthenate ( 58 Co-naphthenate ) often used as the tracer in the water injection technique. The tracer 58 Co-naphthenate relatively easy to synthesis and radioisotope 58 Co has half life 70.86 days and gamma energy was 0.811 Me v. The synthesis method of 58 Co-naphthenate route has been carried out by mixing of 58 CoCl 2 radioisotope solution with sodium naphthenate (C 5 H 9 CH 2 COONa) in the optimum condition. The results shows that the optimal mole ratio of cobalt-58 and naphthenate was 1:6 which produced 87,38 % of ren dement and 82,5 % of efficiency labelling. This synthesis technique was made permanent procedure for making of 58 Co-naphthenate complex as radioactive tracer in service of radioisotope production especially industrial area. (author)

Atmospheric production rate of {sup 36}Cl

Energy Technology Data Exchange (ETDEWEB)

Parrat, Y.; Hajdas, W.; Baltensperger, U.; Synal, H.A.; Kubik, P.W.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Suter, M. [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

1997-09-01

Using experimental cross sections, a new calculation of the atmospheric production rate of {sup 36}Cl was carried out. A mean production rate of 20 atoms m{sup -2}s{sup -1} was obtained, which is lower than mean {sup 36}Cl deposition rates. (author) 2 figs., 7 refs.

A new cylindrical capacitance sensor for measurement of water cut in a low-production horizontal well

International Nuclear Information System (INIS)

Liu Xingbin; Hu Jinhai; Xie Zhonglin; Li Yiwei; Xu Wenfeng; Xu Lijun

2009-01-01

In a horizontal well with low flow rate, oil-water two-phase flow is stratified due to gravity. For measuring water cut accurately in a low-production horizontal well, a novel cylindrical capacitance sensor is proposed in this paper. The structure of the sensor is cylindrical and hollow with multi-layer structure which is consisted of inside insulation layer, electrode layer, outside insulation layer and metal casing from inside to outside. And the measurement principle is analyzed in this paper. The mathematical model is established, which shows that theoretically, there is a good relationship between the sensor response and water holdup. The response curve is monotone and the sensor has a good resolution and a high sensitivity in the whole range of water holdup. The electric field of cylindrical capacitance sensor was simulated respectively by using ANSYS software when the sensor is filled with pure water, pure oil and oil-water mixture. The results of the simulation are consistent with the mathematical model. Static experiments with the sensor filled with oil-water mixture were conducted finally. The results have verified the theoretical analysis and show that the proposed sensor is a viable solution to measuring water cut in a low-production horizontal well. Cylindrical capacitance sensor provides a good reference for the water cut in low-production horizontal well and has a good application prospect.

Asphaltene precipitates in oil production wells

DEFF Research Database (Denmark)

Kleinitz, W,; Andersen, Simon Ivar

1998-01-01

compounds in the organic scales from operations definitely differed from the data published in the literature. In order to dissolve the precipitates and thus eliminate the damage, various organic solvents and industrial solvent mixtures were examined. The kinetics of the dissolution process in operational...... production is also explained and discussed in detail from a reservoir engineering standpoint....

Well performance relationships in heavy foamy oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Kumar, R.; Mahadevan, J. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Tulsa Univ., Tulsa, OK (United States)

2008-10-15

The viscosities and thermodynamic properties of heavy oils are different from conventional oils. Heavy oil reservoirs have foamy behaviour and the gas/oil interface stabilizes in the presence of asphaltenes. In the case of conventional oils, gas evolves from the solution when the formation pressure reaches the bubble point pressure. This study modelled the fluid properties of heavy foamy oils and their influence on the inflow performance relationship (IPR). An expression for inflow performance in heavy oil was developed by including the properties of foamy oil into a space averaged flow equation assuming pseudo-steady state conditions. The unique feature of this study was that the density, formation volume factor and solution gas-oil ratio were modelled as functions of entrained gas fraction. The newly developed expression for inflow performance of foamy oils may also be used to model conventional oil inflow by setting the entrained gas fraction to zero in the fluid property models. The results of the inflow performance of foamy oil and conventional oil were compared and an outflow performance relationship was calculated. The study showed that the inflow performance in foamy oil is influenced by entrained gas. The surface flow rates and bottom-hole flow rates are also influenced by the presence of entrained gas, with heavy foamy oil showing a higher volumetric production rate than conventional oil. The outflow performance curve depended on the fluid properties of the foamy oil. A nodal analysis of the well performance showed that the conventional calculation methods underestimate the production from foamy oil wells because they do not consider the effect of entrained gas which lowers density and improves the mobility of foamy oil. 14 refs., 2 tabs., 20 figs., 1 appendix.

Emulation and Control of Slugging Flows in a Gas-Lifted Offshore Oil Production Well Through a Lab-sized Facility

DEFF Research Database (Denmark)

Jepsen, Kasper Lund; Hansen, Leif; Mai, Christian

2013-01-01

flow and pressures in the production well system, which is referred to as the slugging flow problem. This instability is mainly due to the casing-heading mechanism. This work investigates the possibility to use a feedback control for stabilizing the production operation without sacrificing...... the production capability. A labsized production well system is constructed in an economic manner. Afterwards, a simple nonlinear model is derived according to physical principles and then verified with the experimental facility. A observer-based state feedback control is designed to handle the potential...... slugging problem. The developed controller manipulates the openness degree of the production choke based on feedback a number of pressure measurements. The current simulation results showed satisfactory control performances by stabilizing the system operation at some relatively large production rate which...

Feasibility of oil recovery by chemical flooding through horizontal wells

Energy Technology Data Exchange (ETDEWEB)

El-Abbas, A.M.; El-Sallaly, M. E.; Sayyouh, M. H.; El-Batanony, M. H.; Darwich, T. M.; Desouky, S. M. [Cairo Univ (Egypt)

1998-12-31

Crude oil production in the Gulf of Suez by polymer, surfactant, and surfactant/polymer flooding from a horizontal well in a scaled five-spot sandpacked model was studied. The suitability of the enhanced oil recovery predictive models, developed by the U.S. Department of Energy, was investigated for their ability to predict the experimental data and to assess the feasibility of oil recovery by chemical flooding. Good agreement was found between the predicted and experimental values. Experimental results showed that oil recovery was significantly affected by the physical properties of the crude oil and chemical solutions; that oil recovery was higher for a polymer flooding than for a surfactant flooding operation; and that oil recovery was improved by increasing the perforated length ratio up to a value of 0.81. A tendency for oil recovery to decrease was observed when the horizontal well was positioned below or above the central axis path of the formation at the advanced injection stages; and oil recovery by surfactant or polymer flooding was significantly affected by the onset timing of the surfactant or polymer slug injection. The oil-water bank stability in surfactant and polymer flooding processes was found to be dependent on slug size and slug injection time. 23 refs., 1 tab., 17 figs.

Multipurpose service vessels. Versatile toolkits for well intervention

Energy Technology Data Exchange (ETDEWEB)

Adamson, S [Dowell, Las Morochas (Venezuela); Cupello, F; Hicks, J; Keenleyside, M [Sedco Forex, Las Morochas (Venezuela); Formas, D; Gabillard, C [Sedco Forex, Montrouge (France); Gamarra, F; Sanchez, A [Lagoven SA, Tia Juana (Venezuela)

1997-12-31

The industry has entered a new area in offshore support operations. Today, novel concepts and designs offer an expanded range of capabilities from a single vessel rather than the multiple boats and barges that have been used in the past. This continuing evolution in marine services is rapidly transforming well workover and intervention activities, and solving logistics and performance problems that have challenged oil and gas operators for decades. 13 figs., 5 refs.

Multipurpose service vessels. Versatile toolkits for well intervention

Energy Technology Data Exchange (ETDEWEB)

Adamson, S. [Dowell, Las Morochas (Venezuela); Cupello, F.; Hicks, J.; Keenleyside, M. [Sedco Forex, Las Morochas (Venezuela); Formas, D.; Gabillard, C. [Sedco Forex, Montrouge (France); Gamarra, F.; Sanchez, A. [Lagoven SA, Tia Juana (Venezuela)

1996-12-31

The industry has entered a new area in offshore support operations. Today, novel concepts and designs offer an expanded range of capabilities from a single vessel rather than the multiple boats and barges that have been used in the past. This continuing evolution in marine services is rapidly transforming well workover and intervention activities, and solving logistics and performance problems that have challenged oil and gas operators for decades. 13 figs., 5 refs.

Water supply at Los Alamos: Current status of wells and future water supply

International Nuclear Information System (INIS)

Purtymun, W.D.; Stoker, A.K.

1988-08-01

The municipal and industrial use of groundwater at the Los Alamos National Laboratory and Los Alamos County was about 1.5 billion gallons during 1986. From a total of 19 wells that range in age from 5 to 41 years, the water was pumped from 3 well fields. The life expectancy of a well in the area ranges from 30 to 50 years, dependent on the well construction and rate of corrosion of the casing and screen. Twelve of the wells are more than 30-years old and, of these, four cannot be used for production, three because of well damage and one because the quality of water is not suitable for use. Eight of the twelve oldest wells are likely to be unsuitable for use in the next 10 years because of well deterioration and failure. The remaining 7 wells include 2 that are likely to fail in the next 20 years. Five of the younger wells in the Pajarito well field are in good condition and should serve for another two or three decades. The program of maintenance and rehabilitation of pumps and wells has extended production capabilities for short periods of time. Pumps may be effectively repaired or replaced; however, rehabilitation of the well is only a short-term correction to increase the yield before it starts to decline again. The two main factors that prevent successful well rehabilitation are: (1) chemicals precipitated in the gravel pack and screen restrict or reduce the entrance of water to the well, which reduces the yield of the well, and (2) the screen and casing become corroded to a point of losing structural strength and subsequent failure allows the gravel pack and formation sand to enter the well. Both factors are due to long-term use and result in extensive damage to the pump and reduce the depth of the well, which in turn causes the yield to decline. Once such well damage occurs, rehabilitation is unlikely to be successful and the ultimate result is loss of the well. Two wells were lost in 1987 because of such damage. 29 refs., 15 figs., 15 tabs

Environmental degradation, global food production, and risk for large-scale migrations

International Nuclear Information System (INIS)

Doeoes, B.R.

1994-01-01

This paper attempts to estimate to what extent global food production is affected by the ongoing environmental degradation through processes, such as soil erosion, salinization, chemical contamination, ultraviolet radiation, and biotic stress. Estimates have also been made of available opportunities to improve food production efficiency by, e.g., increased use of fertilizers, irrigation, and biotechnology, as well as improved management. Expected losses and gains of agricultural land in competition with urbanization, industrial development, and forests have been taken into account. Although estimated gains in food production deliberately have been overestimated and losses underestimated, calculations indicate that during the next 30-35 years the annual net gain in food production will be significantly lower than the rate of world population growth. An attempt has also been made to identify possible scenarios for large-scale migrations, caused mainly by rapid population growth in combination with insufficient local food production and poverty. 18 refs, 7 figs, 6 tabs

Elusive prize: enormous coal gas potential awaits production technology breakthrough

Energy Technology Data Exchange (ETDEWEB)

Collison, M.

2002-01-07

The expanded gas pipeline grid has excess capacity, and gas resources are declining. There is increasing interest in development of Canada's resources of coalbed methane (CBM). The chairman of the Canadian Coalbed Methane Forum estimates that Canada has more than 3,000 trillion ft{sup 3} of gas awaiting suitable technology. PanCanadian and MGV Energy conducted a CBM exploration and pilot study on the Palliser spread in southern Alberta. Results from 23 of 75 wells are encouraging. The study is being accelerated and expanded to include an additional 50 wells elsewhere in Alberta. Some scientists anticipate commercial CBM production within two years. Problems facing developers include the large land holdings necessary for economic CBM production and the disposal of coal formation water. It is anticipated that U.S. technology will be modified and used. The potential for CBM development at Pictou in Nova Scotia and in British Columbia in the foothills is considered. 3 figs.

Water quality considerations resulting in the impaired injectivity of water injection and disposal wells

International Nuclear Information System (INIS)

Bennion, D.B.; Thomas, F.B.; Imer, D.; Ma, T.

2000-01-01

An environmentally responsible way to improve hydrocarbon recovery is to maintain pressure by water injection. This is a desirable method because unwanted produced water from oil and gas wells can be re-injected into producing or disposal formations. The success of the operation, however, depends on injecting the necessary volume of water economically, below the fracture gradient pressure of the formation. Well placement, geometry and inherent formation quality and relative permeability characteristics are some of the many other factors which influence the success of any injection project. Poor injection or poor quality of disposal water can also compromise the injectivity for even high quality sandstone or carbonate formations. This would necessitate costly workovers and recompletions. This paper presented some leading edge diagnostic techniques and evaluation methods to determine the quality of injected water. The same techniques could be used to better understand the effect of potential contaminants such as suspended solids, corrosion products, skim/carryover oil and grease, scales, precipitates, emulsions, oil wet hydrocarbon agglomerates and many other conditions which cause injectivity degradation. 14 refs., 1 tab., 15 figs

Environmental applications for an intrinsic germanium well detector

International Nuclear Information System (INIS)

Stegnar, P.; Eldridge, J.S.; Teasley, N.A.; Oakes, T.W.

1984-01-01

The overall performance of an intrinsic germanium well detector for 125 I measurements was investigated in a program of environmental surveillance. Concentrations of 125 I and 131 I were determined in thyroids of road-killed deer showing the highest activities of 125 I in the animals from the near vicinity of Oak Ridge National Laboratory. This demonstrates the utility of road-killed deer as a bionindicator for radioiodine around nuclear facilities. 6 refs., 2 figs., 3 tabs

Environmental applications for an intrinsic germanium well detector

International Nuclear Information System (INIS)

Stegnar, P.; Eldridge, J.S.; Teasley, N.A.; Oakes, T.W.

1983-01-01

The overall performance of an intrinsic germanium well detector for 125 I measurements was investigated in a program of environmental surveillance. Concentrations of 125 I and 131 I were determined in thyroids of road-killed deer showing the highest activities of 125 I in the animals from the near vicinity of Oak Ridge National Laboratory. This demonstrates the utility of road-killed deer as a bioindicator for radioiodine around nuclear facilities. 6 refs., 2 figs., 3 tabs

Productivity in Swedish electricity retail distribution

International Nuclear Information System (INIS)

Hjalmarsson, L.; Veiderpass, A.

1992-01-01

This paper examines productivity growth in electricity retail distribution in Sweden in a multiple output-multiple input framework. The approach used is nonparametric Data Envelopment Analysis (DEA). Productivity is measured by means of the Malmquist index. Productivity comparisons are made between different types of ownership and between different service areas. The study indicates a high rate of productivity growth, due to economics of density, when measured over a period of 17 years. The results show no significant differences in productivity growth between different types of ownership or economic organization. (20 refs., 1 fig., 4 tabs.)

Biogas Production Resources in Lithuania and Prospects of their Utilisation

International Nuclear Information System (INIS)

Vrubliauskas, S.

1995-01-01

The biogas production resources in Lithuania and their structure have been ascertained. The total technical potential of biogas production has been calculated to make 639 million m 3 per year (4080 GWh). The biogas production feasibilities in the country have been estimated. (author). 3 refs., 3 tabs., 2 figs

Domestic buffalo production in Asia

International Nuclear Information System (INIS)

1990-01-01

Buffalo production has a crucial role to play in the rural farming systems of Asia. The region contains some 120 million water buffaloes, which provide draught power, milk, meat, hides and other by-products to the millions of peasant farmers. Despite the undisputed importance of buffaloes, there are several factors which limit realization of their full potential. Climatic and nutritional stresses as well as diseases which are inherently more acute in their native tropical environment often result in poor growth, low reproductive efficiency, poor milk yield and high mortality. In 1978, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a 5 year Co-ordinated Research Programme (CRP) to determine the constraints to buffalo production in terms of nutrition, reproduction and disease. On the basis of the experience gained and the scientific results obtained during this programme, a second CRP (Phase II) was initiated in 1984 to address the more applied aspects of alleviating the constraints which limit the productivity of buffalo. These Proceedings report the results of the second 5 year programme of research. The papers are essentially a synthesis of those presented by the participants of the programme at the Final Research Co-ordination Meeting held in Rockhampton, Australia, from 20 to 24 February 1989. Refs, figs and tabs

Comparison of Microbial Community Compositions of Injection and Production Well Samples in a Long-Term Water-Flooded Petroleum Reservoir

Science.gov (United States)

Ren, Hong-Yan; Zhang, Xiao-Jun; Song, Zhi-yong; Rupert, Wieger; Gao, Guang-Jun; Guo, Sheng-xue; Zhao, Li-Ping

2011-01-01

Water flooding plays an important role in recovering oil from depleted petroleum reservoirs. Exactly how the microbial communities of production wells are affected by microorganisms introduced with injected water has previously not been adequately studied. Using denaturing gradient gel electrophoresis (DGGE) approach and 16S rRNA gene clone library analysis, the comparison of microbial communities is carried out between one injection water and two production waters collected from a working block of the water-flooded Gudao petroleum reservoir located in the Yellow River Delta. DGGE fingerprints showed that the similarities of the bacterial communities between the injection water and production waters were lower than between the two production waters. It was also observed that the archaeal composition among these three samples showed no significant difference. Analysis of the 16S rRNA gene clone libraries showed that the dominant groups within the injection water were Betaproteobacteria, Gammaproteobacteria and Methanomicrobia, while the dominant groups in the production waters were Gammaproteobacteria and Methanobacteria. Only 2 out of 54 bacterial operational taxonomic units (OTUs) and 5 out of 17 archaeal OTUs in the injection water were detected in the production waters, indicating that most of the microorganisms introduced by the injection water may not survive to be detected in the production waters. Additionally, there were 55.6% and 82.6% unique OTUs in the two production waters respectively, suggesting that each production well has its specific microbial composition, despite both wells being flooded with the same injection water. PMID:21858049

Overall well-being as a predictor of health care, productivity, and retention outcomes in a large employer.

Science.gov (United States)

Sears, Lindsay E; Shi, Yuyan; Coberley, Carter R; Pope, James E

2013-12-01

Employers struggle with the high cost of health care, lost productivity, and turnover in their workforce. The present study aims to understand the association between overall well-being and these employer outcomes. In a sample of 11,700 employees who took the Well-being Assessment, the authors used multivariate linear and logistic regression to investigate overall well-being as a predictor of health care outcomes (total health care expenditure, emergency room visits, hospitalizations), productivity outcomes (unscheduled absence, short-term disability leave, presenteeism, job performance ratings), and retention outcomes (intention to stay, voluntary turnover, involuntary turnover). Testing this hypothesis both cross-sectionally and longitudinally, the authors investigated the association between baseline well-being and these outcomes in the following year, and the relationship between change in overall well-being and change in these outcomes over 1 year. The results demonstrated that baseline overall well-being was a significant predictor of all outcomes in the following year when holding baseline employee characteristics constant. Change in overall well-being over 1 year also was significantly associated with the change in employer outcomes, with the exception that the relationship to change in manager-rated job performance was marginally significant. The relationships between overall well-being and outcomes suggest that implementing a well-being improvement solution could have a significant bottom and top line impact on business performance.

Altering Reservoir Wettability to Improve Production from Single Wells

Energy Technology Data Exchange (ETDEWEB)

W. W. Weiss

2006-09-30

tests were conducted in an area of the field that has not met production expectations. The dataset on the 23 Phosphoria well surfactant soaks was updated. An analysis of the oil decline curves indicted that 4.5 lb of chemical produced a barrel of incremental oil. The AI analysis supports the adage 'good wells are the best candidates.' The generally better performance of surfactant in the high permeability core laboratory tests supports this observation. AI correlations were developed to predict the response to water-frac stimulations in a tight San Andres reservoir. The correlations maybe useful in the design of Cedar Creek Anticline surfactant soak treatments planned for next year. Nuclear Magnetic Resonance scans of dolomite cores to measure porosity and saturation during the high temperature laboratory work were acquired. The scans could not be correlated with physical measurement using either conventional or AI methods.

Feasibility test for production and separation of 103Pd

International Nuclear Information System (INIS)

Szuecs, Z.; Takacs, S.; Hunyadi, M.; Gacsi, Z.; Zeevaart, J.R.

2011-01-01

Complete text of publication follows. 103 Pd as a well-known Auger-emitter is commonly employed in brachytherapy, but the ultra-short range stopping of Auger-electrons can be more potentially exploited in applications of targeted radionuclide therapy in the future. The no-carrier-added production of 103 Pd is practically possible through charged particle induced reactions. However, separation techniques of 103 Pd from the target material (typically Rh), as well as its recovery by wet chemistry are expensive, and yields high amounts of radioactive waste. An alternative and more efficient procedure, called drydistillation method (DDM), is based on differences between the isothermal vapor pressures of the radionuclide element and the target element. In an appropriately selected temperature region the diffusion and out-gassing rates of radionuclides from the solid matrix of the target material are enhanced. Optimal irradiation parameters were determined in previous experiments at ATOMKI. Separation of 103 Pd was demonstrated at the Isotope Separator Laboratory with an evaporating-condensing system (Fig. 1). Figure 1. Evaporation-condensation system at the Isotope Separator Laboratory of ATOMKI. The irradiated Rh foil was kept above 1800?C in vacuum for several hours. The evaluation of γ-spectra of the Rh foil and the 103 Pd condensed on a low-temperature substrate (Fig. 2). The analysis resulted in a radiochemical yield of about 99.5% for 103 Pd and a radionuclidic purity of better than 99% with respect to the level of 101 Rh in the end product. Acknowledgement. The work was partly supported by the Hungarian TeT Bilateral Cooperation (OMFB- 00138/2009) and by the South African NRF (UID 68768).

Integrated 3D geology modeling constrained by facies and horizontal well data for Block M of the Orinoco heavy oil belt

Energy Technology Data Exchange (ETDEWEB)

Longxin, M.; Baojun, X.; Shancheng, Z.; Guoqing, H. [CNPC America Ltd., Caracas (Venezuela)

2008-10-15

Horizontal well drilling with cold production were used to develop most of heavy oil fields in Venezuela's Orinoco heavy oil belt. This study interpreted the horizontal well logs of Block M of the Orinoco heavy oil belt in an effort to improve production from this highly porous and permeable reservoir. The reservoir is comprised primarily of non-consolidated sandstones. A porosity calculation formula for the horizontal well without porosity logs was established based on the study of horizontal well logging data of block M in the Orinoco heavy oil belt. A high quality 3-D simulation tool was used to separate the block into several different sections. A set of methods were presented in order to identify if the well track was approaching an adjacent formation, to estimate the distance between the well track and the adjacent formation, and to correct the deep resistivity of the horizontal section affected by the adjacent formation. A set of interpretation techniques were established, based on the combination of well logging data, seismic data and the oilfield development performance data. It was concluded that the development of the precise 3D geological model helped to establish a solid foundation for guiding the well position design and the drilling of the horizontal well. It also contributed to the reservoir numerical simulation and the effective development of the oil field. 6 refs., 2 tabs., 14 figs.

Well performance model

International Nuclear Information System (INIS)

Thomas, L.K.; Evans, C.E.; Pierson, R.G.; Scott, S.L.

1992-01-01

This paper describes the development and application of a comprehensive oil or gas well performance model. The model contains six distinct sections: stimulation design, tubing and/or casing flow, reservoir and near-wellbore calculations, production forecasting, wellbore heat transmission, and economics. These calculations may be performed separately or in an integrated fashion with data and results shared among the different sections. The model analysis allows evaluation of all aspects of well completion design, including the effects on future production and overall well economics

Vector-vector production in photon-photon interactions

International Nuclear Information System (INIS)

Ronan, M.T.

1988-01-01

Measurements of exclusive untagged /rho/ 0 /rho/ 0 , /rho//phi/, K/sup *//bar K//sup */, and /rho/ω production and tagged /rho/ 0 /rho/ 0 production in photon-photon interactions by the TPC/Two-Gamma experiment are reviewed. Comparisons to the results of other experiments and to models of vector-vector production are made. Fits to the data following a four quark model prescription for vector meson pair production are also presented. 10 refs., 9 figs

Microbial products II

Energy Technology Data Exchange (ETDEWEB)

Pape, H; Rehm, H J [eds.

1986-01-01

The present volume deals mainly with compounds which have been detected as natural microbial products. Part 1 of this volume introduces the general aspects of the overproduction of metabolites and the concepts and genetics of secondary metabolism. Compounds such as nucleosides, nucleotides, coenzymes, vitamins and lipids are dealt with in part 2. Part 3 then is devoted to products and antibiotics with uses im medicine, veterinary medicine, plant protection and metabolites with antitumor activity. Several secondary metabolites have found uses in human and animal health care. With 244 figs., 109 tabs.

Heavy flavour production in perturbative QCD

International Nuclear Information System (INIS)

Nason, P.; Ridolfi, G.; Frixione, S.; Mangano, M.L.

1994-01-01

The status of heavy flavour production in QCD is reviewed. Recent results on the doubly-differential cross section are discussed for the photoproduction of heavy flavours. Comparison of experimental results with theoretical calculation is discussed both for b production at hadron colliders and c production in fixed-target hadroproduction and photoproduction. The possibility of using photoproduction of heavy flavour in order to determine the gluon density in the proton is also discussed. (author). 38 refs., 8 figs

Alcorn wells bolster Philippines oil production

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Alcorn International Inc., Houston, is producing about 16,500 b/d of oil from West Linapacan A field in the South China Sea off the Philippines. The field's current production alone is more than fivefold the Philippines' total average oil flow of 3,000 b/d in 1991. It's part of a string of oil and gas strikes off Palawan Island that has made the region one of the hottest exploration/development plays in the Asia-Pacific theater

Experiments on eta-meson production

International Nuclear Information System (INIS)

Peng, J.C.

1985-01-01

Following a review of some highlights of eta-meson characteristics, the status of eta-meson production experiments is reviewed. The physics motivations and first results of two LAMPF experiments on (π,eta) reactions are discussed. Possible future experiments are also discussed. 42 refs., 12 figs., 4 tabs

Options for electricity production, the actual opportunities and regulatory framework

International Nuclear Information System (INIS)

Raphals, P.

2006-01-01

Thermal power and nuclear power represent the traditional methods of generating electricity. This paper presented opportunities for alternative centralized power production methods that include wind energy, biomass and solar energy. It also discussed decentralized alternatives for power generation, such as geothermal energy and cogeneration, including microturbines. The primary focus was on aspects of competitive market design for residential and small commercial applications as well as commercial and industrial applications. Law 116 of Quebec's Energy Board was reviewed in terms of energy policy and utility regulation. In particular, the framework agreement between Hydro-Quebec Production (HQP) and Hydro-Quebec Distribution (HQD) was discussed with reference to balancing electricity produced from renewable energy sources and energy security. The presentation also addressed issues regarding the role of competition, regulation and environmental implications of electricity trade. refs., tabs., figs

The three-zone composite productivity model for a multi-fractured horizontal shale gas well

Science.gov (United States)

Qi, Qian; Zhu, Weiyao

2018-02-01

Due to the nano-micro pore structures and the massive multi-stage multi-cluster hydraulic fracturing in shale gas reservoirs, the multi-scale seepage flows are much more complicated than in most other conventional reservoirs, and are crucial for the economic development of shale gas. In this study, a new multi-scale non-linear flow model was established and simplified, based on different diffusion and slip correction coefficients. Due to the fact that different flow laws existed between the fracture network and matrix zone, a three-zone composite model was proposed. Then, according to the conformal transformation combined with the law of equivalent percolation resistance, the productivity equation of a horizontal fractured well, with consideration given to diffusion, slip, desorption, and absorption, was built. Also, an analytic solution was derived, and the interference of the multi-cluster fractures was analyzed. The results indicated that the diffusion of the shale gas was mainly in the transition and Fick diffusion regions. The matrix permeability was found to be influenced by slippage and diffusion, which was determined by the pore pressure and diameter according to the Knudsen number. It was determined that, with the increased half-lengths of the fracture clusters, flow conductivity of the fractures, and permeability of the fracture network, the productivity of the fractured well also increased. Meanwhile, with the increased number of fractures, the distance between the fractures decreased, and the productivity slowly increased due to the mutual interfere of the fractures.

Symmmetric double-well potential with Saxon-Woods tail and Pade approximations

International Nuclear Information System (INIS)

Niculescu, V.I.R.; Catana, D.

1995-01-01

In the present work we introduce a symmetric double-well potential with Woods-Saxon tail. The Woods-Saxon parts are replaced by Pade approximation.In this way the matrix elements of this potential form can be evaluated by the theory of complex functions. This results in a shorter computational time. (author). 1 fig., 1 tab., 7 refs

Gas production and decline rates in the province of Alberta

International Nuclear Information System (INIS)

Samson, L.A.

1999-01-01

A detailed study was conducted to evaluate the gas production decline rates in Alberta. The study examined the producing gas wells that were place in production between 1990 and 1997. Three major assumptions were used to determine the number of wells necessary to meet future market demand. These were: (1) reserves have been declining at greater rates in the past several years. The current rate of decline is 12 per cent, (2) new reserves added in future will produce at 5.1 E6M3 per year, and (3) the decline rates for new gas wells will be 27 per cent in the first year, 16 per cent in the second year, 12 per cent in the third year and thereafter. With this information, the Alberta Energy and Utilities Board estimates that the annual total deliveries of gas from Alberta in the year 2002 will be 177.4 E9M3 compared to 127 E9M3 in 1997. In order to meet this supply, drilling activity for successful gas wells will have to double the 1997 rate because it is predicted that more than 6400 new wells will be needed per year to meet future demand. 2 refs., 2 tabs., 20 figs

An Analytical Model for Multilayer Well Production Evaluation to Overcome Cross-Flow Problem

KAUST Repository

Hakiki, Farizal; Wibowo, Aris T.; Rahmawati, Silvya D.; Yasutra, Amega; Sukarno, Pudjo

2017-01-01

One of the major concerns in a multi-layer system is that interlayer cross-flow may occur if reservoir fluids are produced from commingled layers that have unequal initial pressures. Reservoir would commonly have bigger average reservoir pressure (pore fluid pressure) as it goes deeper. The phenomenon is, however, not followed by the reservoir productivity or injectivity. The existence of reservoir with quite low average-pressure and high injectivity would tend experiencing the cross-flow problem. It is a phenomenon of fluid from bottom layer flowing into upper layer. It would strict upper-layer fluid to flow into wellbore. It is as if there is an injection treatment from bottom layer. The study deploys productivity index an approach parameter taking into account of cross-flow problem instead of injectivity index since it is a production well. The analytical study is to model the reservoir multilayer by addressing to avoid cross-flow problem. The analytical model employed hypothetical and real field data to test it. The scope of this study are: (a) Develop mathematical-based solution to determine the production rate from each layer; (b) Assess different scenarios to optimize production rate, those are: pump setting depth and performance of in-situ choke (ISC) installation. The ISC is acting as an inflow control device (ICD) alike that help to reduce cross-flow occurrence. This study employed macro program to write the code and develop the interface. Fast iterative procedure happens on solving the analytical model. Comparison results recognized that the mathematical-based solution shows a good agreement with the commercial software derived results.

An Analytical Model for Multilayer Well Production Evaluation to Overcome Cross-Flow Problem

KAUST Repository

Hakiki, Farizal

2017-10-17

One of the major concerns in a multi-layer system is that interlayer cross-flow may occur if reservoir fluids are produced from commingled layers that have unequal initial pressures. Reservoir would commonly have bigger average reservoir pressure (pore fluid pressure) as it goes deeper. The phenomenon is, however, not followed by the reservoir productivity or injectivity. The existence of reservoir with quite low average-pressure and high injectivity would tend experiencing the cross-flow problem. It is a phenomenon of fluid from bottom layer flowing into upper layer. It would strict upper-layer fluid to flow into wellbore. It is as if there is an injection treatment from bottom layer. The study deploys productivity index an approach parameter taking into account of cross-flow problem instead of injectivity index since it is a production well. The analytical study is to model the reservoir multilayer by addressing to avoid cross-flow problem. The analytical model employed hypothetical and real field data to test it. The scope of this study are: (a) Develop mathematical-based solution to determine the production rate from each layer; (b) Assess different scenarios to optimize production rate, those are: pump setting depth and performance of in-situ choke (ISC) installation. The ISC is acting as an inflow control device (ICD) alike that help to reduce cross-flow occurrence. This study employed macro program to write the code and develop the interface. Fast iterative procedure happens on solving the analytical model. Comparison results recognized that the mathematical-based solution shows a good agreement with the commercial software derived results.

Deep Production Well for Geothermal Direct-Use Heating of A Large Commercial Greenhouse, Radium Springs, Rio Grande Rift, New Mexico; FINAL

International Nuclear Information System (INIS)

James C. Witcher

2002-01-01

Expansion of a large commercial geothermally-heated greenhouse is underway and requires additional geothermal fluid production. This report discusses the results of a cost-shared U.S. Department of Energy (DOE) and A.R. Masson, Inc. drilling project designed to construct a highly productive geothermal production well for expansion of the large commercial greenhouse at Radium Springs. The well should eliminate the potential for future thermal breakthrough from existing injection wells and the inducement of inflow from shallow cold water aquifers by geothermal production drawdown in the shallow reservoir. An 800 feet deep production well, Masson 36, was drilled on a US Bureau of Land Management (BLM) Geothermal Lease NM-3479 at Radium Springs adjacent to the A. R. Masson Radium Springs Farm commercial greenhouse 15 miles north of Las Cruces in Dona Ana County, New Mexico just west of Interstate 25 near the east bank of the Rio Grande. The area is in the Rio Grande rift, a tectonically-active region with high heat flow, and is one of the major geothermal provinces in the western United State

Petroleum product market report, issue 74, November 1992

International Nuclear Information System (INIS)

1992-11-01

The Petroleum Product Market Report (PPMR) is prepared in the Petroleum Products Section of the Canadian Oil Markets and Emergency Planning Division of Energy, Mines and Resources. The data is compiled from 10 major cities in Canada. The trends in sales and prices are compared on four petroleum products; regular unleaded gasoline, middle gasoline, premium unleaded gasoline and automotive diesel and propane. 7 tabs. 11 figs

MATHEMATICAL FRAMEWORK OF THE WELL PRODUCTIVITY INDEX FOR FAST FORCHHEIMER (NON-DARCY) FLOWS IN POROUS MEDIA

KAUST Repository

AULISA, EUGENIO; IBRAGIMOV, AKIF; VALKO, PETER; WALTON, JAY

2009-01-01

This IBVP described laminar (linear) Darcy flow in porous media; the considered boundary conditions corresponded to different regimes of the well production. The diffusive capacities were then computed as steady state invariants of the solutions

Unstable well behaviour in gas well liquid loading

NARCIS (Netherlands)

Belfroid, S.P.C.; Wijhe, A. van

2017-01-01

Liquid loading is the mechanism that is associated with increased liquid hold-up and liquid back flow at lower gas flow rates in gas production wells. In laboratory, most liquid loading experiments are performed at fixed gas and liquid rates (mass flow controlled). In the field, the well behavior is

Charmed and strange baryon production in 29 GeV electron positron annihilation

International Nuclear Information System (INIS)

Klein, S.R.

1988-06-01

This dissertation presents measurements of the production rates of baryons with different strangeness and spin. The analyses presented here use data taken with the Mark III detector at the PEP storage ring, operating at a center of mass energy of 29 GeV. The Ξ/sup /minus// production rate is measured to be 0.017 +- 0.004 +- 0.004 per hadronic event, Ω/sup /minus// production is measured to be 0.014 +- 0.006 +- 0.004 per hadronic event, and Ξ* 0 production is less than 0.006 per hadronic event at a 90% confidence level. These measurements place strong constraints on models of baryon production. In particular, the unexpectedly high rate of Ω/sup /minus// production is difficult to explain in any diquark based model. Semileptonic Λ/sub c/ + decays have also been observed. Because neither the branching ratios nor the production rate are well known, it is difficult to interpret these results. However, they do indicate that the branching ratio for Λ/sub c/ + → Λlν may be higher than previous experimental measurements. 85 refs., 45 figs., 12 tabs

2. Product quality control and assurance system

International Nuclear Information System (INIS)

1990-01-01

Product quality control and assurance are dealt with in relation to reliability in nuclear power engineering. The topics treated include product quality control in nuclear power engineering, product quality assurance of nuclear power plant equipment, quality assurance programs, classification of selected nuclear power equipment, and standards relating to quality control and assurance and to nuclear power engineering. Particular attention is paid to Czechoslovak and CMEA standards. (P.A.). 2 figs., 1 tab., 12 refs

Some aspects of UO{sub 2} powder production

Energy Technology Data Exchange (ETDEWEB)

Balakrishna, P; Asnani, C K; Prabhakar Rao, L; Kartha, R M; Pillai, P K.M. [Nuclear Fuel Complex, Hyderabad (India)

1994-06-01

UO{sub 2} powder is being produced in a chemical plant from enriched UF{sub 6} and supplied to the pelletizing plant. Small quantities of scrap UO{sub 2} received back from the pelletizing plant are also recycled in the chemical plant to produce UO{sub 2} powder. The powder should be of a consistently high quality so as to finally yield high density sintered pellets with minimum rejection. The final yield of acceptable finished pellets depends on the quality of the powder in the chemical plant as well as the quality of pressing in the pelletizing plant. In this paper, some examples of measures adopted for achieving good quality powder production are presented. (author). 9 refs., 2 figs.

Strangeness production with antiprotons

International Nuclear Information System (INIS)

Barnes, P.D.; Maher, C.J.

1986-05-01

New data from LEAR on the production of hyperon-antihyperon pairs in strong interactions is reported. The possibility of checking CP invariance in the anti ΛΛ system is reviewed together with plans to search for the ξ(2230) in the rho + anti rho → K/sub s/ + anti K/sub s/ reaction. 21 refs., 9 figs., 1 tab

Dilepton (e+e-) production at Bevalac energies

International Nuclear Information System (INIS)

Schroeder, L.S.

1990-09-01

The use of dilepton production in p-A and A-A collisions as a probe of nuclear matter under extreme conditions is described. Recent results from the DLS collaboration at the Bevalac are presented. 10 refs., 2 figs

Production of polarizing Heusler crystals

Energy Technology Data Exchange (ETDEWEB)

Courtois, P. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

1999-11-01

Heusler crystals simultaneously produce monochromatized and polarized neutrons. However, in the past, it was difficult to produce these crystals. In collaboration with the neutron scattering group of CEA Grenoble and LLB Saclay, the production of high quality Heusler crystals has been established at ILL. (author) 3 refs., 2 figs., 1 tab.

A MEAT PRODUCTION STRATEGYFOR SOUTHERN AFRICA

African Journals Online (AJOL)

the task of formulating a rneat prclduction strategy fclr. Southern Africa .... Ch ickcn. '55. '5? '59. '61. 6l. '65. '61. '69. '71. '7-f is. "47. Fig. I Edible protein deived from various animal products ...... of the effort and finance expended on the original.

Increasing gas producer profitability with virtual well visibility via an end-to-end, wireless Internet gas monitoring system

Energy Technology Data Exchange (ETDEWEB)

McDougall, M.; Coleman, K.; Beck, R.; Lyon, R.; Potts, R. [Northrock Resources Ltd., Calgary, AB (Canada); Benterud, K. [Zed.i solutions, Calgary, AB (Canada)

2003-07-01

Most gas producing companies still use 100-year old technology to measure gas volumes because of the prohibitive costs of implementing corporate wide electronic information systems to replace circular mechanical chart technology. This paper describes how Northrock Resources Ltd. increased profitability using Smart-Alek{sup TM} while avoiding high implementation costs. Smart-Alek is a new type of fully integrated end-to-end electronic gas flow measurement (GFM) system based on Field Intelligence Network and End User Interference (FINE). Smart-Alek can analyze gas production through public wireless communications and a web-browser delivery system. The system has enabled Northrock to increase gas volumes with more accurate measurement and reduced downtime. In addition, operating costs were also decreased because the frequency of well visits was reduced and the administrative procedures of data collection was more efficient. The real-time well visibility of the tool has proven to be very effective in optimizing business profitability. 9 refs., 1 tab., 9 figs.

Inclusive Λ0 production and polarization in K-p interactions

International Nuclear Information System (INIS)

Haupt, T.

1985-01-01

In this thesis a detailed analysis of inclusive production of neutral strange particles in K - p interactions at 110 GeV/c is presented. The analysis is concentrated on the Λ 0 hyperon production. About 80% of Λ 0 -s is produced in the channel K - p → Λ 0 KK-bar + anything at 110 GeV/c while at lower energies the inclusive Λ 0 production is dominated by the channel K - p → Λ 0 + pions. Next the results of the measurement of the Λ 0 polarization are presented. These results are compared with those obtained at lower energies as well as with those coming from reactions induced by non-strange projectiles. The most striking feature of the polarization is its dependence on the transverse momentum of Λ 0 , different in different channels and different hemispheres. Finally, our results are compared with predictions of models based on the quark-parton picture. 29 refs., 49 figs., 5 tabs. (author)

Production of φ-Mesons in anti NN-Annihilation

International Nuclear Information System (INIS)

Sapozhnikov, M.G.

1994-01-01

Recent results from the experiments on the φ-meson production in the annihilation of stopped antiprotons have demonstrated a significant (by a factor of 30-50) violation of the OZI rule. Experimental information on the φ-meson production is discussed and possible theoretical explanations of the strong OZI rule violation are reviewed. 37 refs., 4 figs., 2 tabs

Λ production in e+e- annihilations at 29 GeV

International Nuclear Information System (INIS)

Abachi, S.; Baringer, P.; Beltrami, I.

1986-05-01

This paper presents measurements of the inclusive production cross sections of Λ baryons in e + e - annihilations at √s = 29 GeV. The data sample corresponds to an integrated luminosity of 256 pb -1 collected with the High Resolution Spectrometer at PEP. Comparisons are made to the predictions of the Lund model. The data are well described using a strange diquark suppression parameter, (us/ud)/(s/d), of 0.89 +- 0.10/sub -0.16//sup +0.56/, and the measured Λ/sub c/ → Λ + X branching ratio of 23 +- 10%. No polarization is observed in the Λ decays. 17 refs., 5 figs

Methane and Benzene in Drinking-Water Wells Overlying the Eagle Ford, Fayetteville, and Haynesville Shale Hydrocarbon Production Areas.

Science.gov (United States)

McMahon, Peter B; Barlow, Jeannie R B; Engle, Mark A; Belitz, Kenneth; Ging, Patricia B; Hunt, Andrew G; Jurgens, Bryant C; Kharaka, Yousif K; Tollett, Roland W; Kresse, Timothy M

2017-06-20

Water wells (n = 116) overlying the Eagle Ford, Fayetteville, and Haynesville Shale hydrocarbon production areas were sampled for chemical, isotopic, and groundwater-age tracers to investigate the occurrence and sources of selected hydrocarbons in groundwater. Methane isotopes and hydrocarbon gas compositions indicate most of the methane in the wells was biogenic and produced by the CO 2 reduction pathway, not from thermogenic shale gas. Two samples contained methane from the fermentation pathway that could be associated with hydrocarbon degradation based on their co-occurrence with hydrocarbons such as ethylbenzene and butane. Benzene was detected at low concentrations (2500 years, indicating the benzene was from subsurface sources such as natural hydrocarbon migration or leaking hydrocarbon wells. One sample contained benzene that could be from a surface release associated with hydrocarbon production activities based on its age (10 ± 2.4 years) and proximity to hydrocarbon wells. Groundwater travel times inferred from the age-data indicate decades or longer may be needed to fully assess the effects of potential subsurface and surface releases of hydrocarbons on the wells.

Neutron activation analysis (NAA), radioisotope production via neutron activation (PNA) and fission product gas-jet (GJA)

Energy Technology Data Exchange (ETDEWEB)

Gaeggeler, H W [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1996-11-01

Three different non-diffractive applications of neutrons are outlined, neutron activation analysis, production of radionuclides, mostly for medical applications, and production of short-lived fission nuclides with a so-called gas-jet. It is shown that all three devices may be incorporated into one single insert at SINQ due to their different requests with respect to thermal neutron flux. Some applications of these three facilities are summarized. (author) 3 figs., 1 tab., 8 refs.

Neutron activation analysis (NAA), radioisotope production via neutron activation (PNA) and fission product gas-jet (GJA)

International Nuclear Information System (INIS)

Gaeggeler, H.W.

1996-01-01

Three different non-diffractive applications of neutrons are outlined, neutron activation analysis, production of radionuclides, mostly for medical applications, and production of short-lived fission nuclides with a so-called gas-jet. It is shown that all three devices may be incorporated into one single insert at SINQ due to their different requests with respect to thermal neutron flux. Some applications of these three facilities are summarized. (author) 3 figs., 1 tab., 8 refs

Managing and mitigating extensive subsurface fuel product beneath two inner-city heritage buildings

Energy Technology Data Exchange (ETDEWEB)

Friedrich, K. [City of Edmonton, AB (Canada); Morton, P.R. [EBA Engineering Consultants Ltd., Edmonton, AB (Canada)

2006-07-01

The management and mitigation of extensive subsurface fuel product beneath two inner-city heritage buildings in Edmonton, Alberta was examined. The presentation was organized under four components: description and planning; scope and risk; design; and implementation. The description and planning section identified the location, buildings, stakeholders, and integration with other activities. The section on scope and risk addressed issues regarding hydrocarbon impacts, remediation ranking (vertical and inclined wells and horizontal wells), remediation modes, and field trials. The section on design identified the remediation components including extraction wells; liquids separation and collection; water treatment; off-gas catalytic oxidation; sensor data acquisition and PLCS system; satellite link for web monitoring and control, and secure and noise-reducing enclosure. Implementation issues were also discussed with reference to horizontal directional drilling and well construction, difficulties and problems, commissioning, remediation progress to-date, and community benefits. tabs., figs.

Effective number of inelastically interacting nucleons in rare nucleus-nucleus production processes

International Nuclear Information System (INIS)

Korotkikh, V.L.; Lokhtin, I.P.

1992-01-01

A model of nucleus-nucleus interaction using one inelastic NN-interaction is suggested for the exclusive production processes with small cross-section. A-dependence nuclear coherent and incoherent production cross-section are predicted. 20 refs.; 4 figs

Classification of individual well-being scores for the determination of adverse health and productivity outcomes in employee populations.

Science.gov (United States)

Shi, Yuyan; Sears, Lindsay E; Coberley, Carter R; Pope, James E

2013-04-01

Adverse health and productivity outcomes have imposed a considerable economic burden on employers. To facilitate optimal worksite intervention designs tailored to differing employee risk levels, the authors established cutoff points for an Individual Well-Being Score (IWBS) based on a global measure of well-being. Cross-sectional associations between IWBS and adverse health and productivity outcomes, including high health care cost, emergency room visits, short-term disability days, absenteeism, presenteeism, low job performance ratings, and low intentions to stay with the employer, were studied in a sample of 11,702 employees from a large employer. Receiver operating characteristics curves were evaluated to detect a single optimal cutoff value of IWBS for predicting 2 or more adverse outcomes. More granular segmentation was achieved by computing relative risks of each adverse outcome from logistic regressions accounting for sociodemographic characteristics. Results showed strong and significant nonlinear associations between IWBS and health and productivity outcomes. An IWBS of 75 was found to be the optimal single cutoff point to discriminate 2 or more adverse outcomes. Logistic regression models found abrupt reductions of relative risk also clustered at IWBS cutoffs of 53, 66, and 88, in addition to 75, which segmented employees into high, high-medium, medium, low-medium, and low risk groups. To determine validity and generalizability, cutoff values were applied in a smaller employee population (N=1853) and confirmed significant differences between risk groups across health and productivity outcomes. The reported segmentation of IWBS into discrete cohorts based on risk of adverse health and productivity outcomes should facilitate well-being comparisons and worksite interventions.

Targeted steam injection using horizontal wells with limited entry perforations

Energy Technology Data Exchange (ETDEWEB)

Boone, T. J.; Youck, D. G.; Sun, S. [Imperial Oil Resources, Calgary, AB (Canada)

1998-12-31

An experimental horizontal well using limited-entry perforations as a method for distributing steam to different zones was used to replace ten vertical injection wells. The well was located between rows of vertical wells in a reservoir that has been subjected to more than ten years of operation under cyclic steam stimulation. The limited-entry perforations enabled steam to be targeted at the cold regions of the reservoir. This paper presents an assessment of the well based on theoretical calculations, measured injection pressures and rates and 3-D seismic imaging. All the data collected during the experiment support the conclusion that effective steam distribution along the well has been achieved. It was also concluded that this technology has significant potential for SAGD applications as a mechanism for achieving improved steam distribution at a much reduced cost. 5 refs., 8 figs.

Herbicides and their transformation products in source-water aquifers tapped by public-supply wells in Illinois, 2001-02

Science.gov (United States)

Mills, Patrick C.; McMillan, William D.

2004-01-01

During 2001-02, ground-water samples were collected from 117 public-supply wells distributed throughout Illinois to evaluate the occurrence of herbicides and their transformation products in the State?s source-water aquifers. Wells were selected using a stratified-random method to ensure representation of the major types of source-water aquifers in the State. Samples were analyzed for 18 herbicides and 18 transformation products, including 3 triazine and 14 chloroacetanilide products. Herbicide compounds (field-applied parent herbicides and their transformation products) were detected in 34 percent of samples. A subset of samples was collected unfiltered to determine if analytical results for herbicides in unfiltered samples are similar to those in paired filtered samples and, thus, can be considered equally representative of herbicide concentrations in ground water supplied to the public. The study by the U.S. Geological Survey was done in cooperation with the Illinois Environmental Protection Agency. Parent herbicides were detected in only 4 percent of all samples. The six most frequently detected herbicide compounds (from 5 to 28 percent of samples) were chloroacetanilide transformation products. The frequent occurrence of transformation products and their higher concentrations relative to those of most parent herbicides confirm the importance of obtaining information on transformation products to understand the mobility and fate of herbicides in ground-water systems. No sample concentrations determined during this study exceeded current (2003) Federal or State drinking-water standards; however, standards are established for only seven parent herbicides. Factors related to the occurrence of herbicide compounds in the State?s source-water aquifers include unconsolidated and unconfined conditions, various hydrogeologic characteristics and well-construction aspects at shallow depths, and proximity to streams. Generally, the closer an aquifer (or well location) is

Microbial production of gaseous hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Fukuda, Hideo

1987-10-20

Microbial production of ethylene, isobutane and a saturated gaseous hydrocarbon mixture was described. Microbial ethylene production was studied with Penicillium digitatum IFO 9372 and a novel pathway of the ethylene biosynthesis through alpha-ketoglutarate was proposed. Rhodotorula minuta IFO 1102 was selected for the microbial production of isobutane and the interesting actions of L-leucine and L-phenylalanine for the isobutane production were found. It was finally presented about the microbial production of a saturated gaseous hydrocarbon mixture with Rhizopus japonicus IFO 4758 was described. A gas mixture was produced through a chemical reaction of SH compounds and some cellular component such as squalene under aerobic conditions. (4 figs, 7 tabs, 41 refs)

Frequency distribution, isotopic composition and physical characterization of plutonium-bearing particles from the Fig-Quince zone on Runit Island, Enewetak Atoll

International Nuclear Information System (INIS)

Hamilton, T.F.; Martinelli, R.E.; Kehl, S.R.; Rivers, A.N.; Brown, T.A.; Tumey, S.J.; Jernstroeem, J.; Williams, R.W.

2009-01-01

Runit Island on Enewetak Atoll was very heavily impacted by the U.S. nuclear testing campaign in the northern Marshall Islands (1946-58). The primary source of contamination on Runit Island was the 1958 Quince safety test where a large quantity of device plutonium (Pu) was scattered over the area near the GZ. A second low-yield device was detonated on the same site 10 days later, further disturbing the soil and leaving behind a very heterogeneous pattern of contamination including milligram-size particles of plutonium. A limited cleanup of the Fig-Quince zone was carried out in 1979. During this period, the effectiveness of the cleanup operations was primarily evaluated on the basis of bulk soil concentration data with little consideration given to the heterogeneity and long-term material-, biological-, and environmental-specific impacts of residual high activity (hot) particle contamination. The aim of the present study was twofold; (i) to characterize the levels and distribution of residual contamination in the Fig-Quince zone, and (ii) to develop pertinent data on the frequency distribution, elemental and isotopic composition, and physico-chemical properties of hot particles isolated from surface soils from Fig-Quince with a view towards providing recommendations on the future management and possible cleanup of the site. Today, Runit Island remains under an administrative quarantine. (author)

76 FR 18511 - Notice of Decision To Issue Permits for the Importation of Fresh Figs From Chile into the...

Science.gov (United States)

2011-04-04

... United States of fresh figs from Chile. Based on the findings of a pest risk analysis, which we made... the findings of a pest risk analysis, can be safely imported subject to one or more of the designated... the Federal Register announcing the availability of the pest risk analysis that evaluates the risks...

Experience with supermirror production at PSI

International Nuclear Information System (INIS)

Boeni, P.; Elsenhans, O.; Friedli, H.P.; Grimmer, H.; Anderson, I.S.

1993-01-01

Supermirror coatings for the seven neutron guides of the continuous spallation source SINQ at PSI are being produced on a DC-magnetron sputtering plant at PSI since April 1993 at a rate of up to 2 meters of guide per day. All Supermirrors are characterised after production on the test spectrometer TOPSI at reactor Saphir. The more than 300 production runs allow interesting comparisons between coatings made on various types of glasses. (author) 3 figs

Horizontal well drilled to intersect existing vertical well

International Nuclear Information System (INIS)

Price, C.; Reynolds, J.

1991-01-01

Morse oilfield, in eastern Gray County of the Texas Panhandle, was originally developed between 1928 and 1937. It is but a very small part of the huge Texas Pandhandle field, which covers over 200,000 productive acres, containing 12,500 active wells with a cumulative production of one billion barrels of oil. The field produces from Permian age dolomites and the Pennsylvanian Granite Wash. This paper reports on multiple production techniques that have been used over the years with varying levels of success. Acidizing techniques in the late 1930s increased development, but the advent of hydraulic fracturing resulted in extensive development. The primary drive mechanism was solution-gas drive. Approximately one-fourth of Panhandle field has been subjected to gas injection, resulting in an estimated 50 million barrels of additional oil production. In 1955, waterflooding appeared to offer the most economical possibility of increasing ultimate recovery from the Brown Dolomite reservoir. The Morse Brown Dolomite pilot flood in Gray County and another Brown Dolomite pilot flood in Hutchinson County were the first two successful pilot floods in Panhandle field. The Morse flood has a total of 40 oil and 27 water injection wells on 500 flood acres. Morse field has a cumulative production of 15.7 million barrels of oil. The operating company, Future Petroleum Corp., a Dallas-based independent, believes that a third alternative using horizontal drilling has the potential to increase production. And it appears that the Brown Dolomite formation of Morse field offers the right combination of factors to attempt this type of venture

Prediction of critical transport velocity for preventing sand deposition in gas-oil multiphase production and well systems

Energy Technology Data Exchange (ETDEWEB)

Bello, O.O.; Reinicke, K.M. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. of Petroleum Engineering; Teodoriu, C. [Texas A and M Univ., College Station, TX (United States). Dept. of Petroleum Engineering

2008-10-23

The critical transport velocity is one of the key parameters for gas-oil-sand multiphase production and well system design and safe operation. Existing American Petroleum Institute Recommended Practice 14E (API RP 14E) for the sizing of multiphase flow systems suggests an equation to calculate threshold transport velocity. This equation only considers mixture density and does not account for factors such as fluid properties, gas-liquid flow patterns, sand loading, sand particle size, size distributions, shape factor and density. This work presents an improved computational methodology, which can be applied to estimate the critical transport velocity required to ensure efficient performance of gas-oil-sand multiphase production and well systems. The improved method is based on the modelling of three-phase gas-oil-sand pipe flow physics from first principle. Computations of the critical transport velocities show reasonable agreement with values calculated from mechanistic model (Danielson, 2007) for a relatively wide range of design and operating conditions. Compared with the mechanistic model (Danielson, 2007), the present method has no imposed limitations to the range of applicability. It is also takes into adequate account the effects of operating pressure, flow geometry, sand particle size, size distribution and shape factor, which have considerable influence on the critical transport velocity in gas-oil-sand multiphase production and well systems. (orig.)

Surface states in thin versus thick organic quantum wells

International Nuclear Information System (INIS)

Nguyen Ba An; Hanamura, E.

1995-08-01

Surface states are studied in dependence on thickness or organic quantum wells within the nearest layer approximation. It is shown that there is a material-dependent critical thickness. Structures, that have thickness thinner or thicker than the critical one, exhibit qualitatively different characteristics of surface states. Criteria for existence and sign rules for location of energy levels of surface states are established which are general and contain the results of the previous works as particular cases. (author). 18 refs, 3 figs

Thermally stimulating mechanically-lifted well production

Energy Technology Data Exchange (ETDEWEB)

Richardson, E.A.; Hinson, R.A.

1984-06-19

A well which is producing slowly by artificial lift can be economically heated by first inflowing a nitrogen-generating solution, to form a pool of reacting liquid near the uppermost opening into the reservoir, then inflowing more solution while artificially-lifting liquid from near the lowermost opening into the reservoir at a rate substantially equalling the inflow rate.

Cumulative effect in multiple production processes on nuclei

International Nuclear Information System (INIS)

Golubyatnikova, E.S.; Shmonin, V.L.; Kalinkin, B.N.

1989-01-01

It is shown that the cumulative effect is a natural result of the process of hadron multiple production in nuclear reactions. Interpretation is made of the universality of slopes of inclusive spectra and other characteristics of cumulative hadrons. The character of information from such reactions is discussed, which could be helpful in studying the mechanism of multiparticle production. 27 refs.; 4 figs

Composition of hydrogenation products of Borodino brown coal

Energy Technology Data Exchange (ETDEWEB)

M.A. Gyul' malieva; A.S. Maloletnev; G.A. Kalabin; A.M. Gyul' maliev [Institute for Fossil Fuels, Moscow (Russian Federation)

2008-02-15

The composition of liquid products of hydrogenation of brown coal from the Borodino deposit was determined by means of {sup 13}C NMR spectroscopy and chemical thermodynamics methods. It was shown that the group composition of the liquid hydrogenation products at thermodynamic equilibrium is predictable from the elemental composition of the organic matter of parent coal. 9 refs., 5 figs., 6 tabs.

Effects of Deficient Irrigation on Some of the Morpho-physiological Characteristics of Four Fig Cultivars

Directory of Open Access Journals (Sweden)

Gh. Davarynejad

2016-07-01

Full Text Available Introduction: The amount of water available to plants includes one of the most important factors that affect the growth of plants. The objective of the present study was to investigate and compare the tolerance of different fig types (Ficus carica L. to different low irrigation treatments. Materials and Methods: A factorial trial based on a completely randomized design with 3 replications was carried out in Ferdowsi University of Mashhad. The treatments of this experiment were four levels of irrigation including; supplying enough water to pots (100% field capacity, mild stress (75% field capacity, average stress (50% field capacity and severe stress (25% field capacity on Green, Black, Shah Fig and Matthew cultivars. Some of morphological and physiological traits like stem growth, leaf umber, leaf area, root length, root area, fresh and dry weight of shoot and root, root to shoot ratio, relative water content, electrolyte leakage, total chlorophyll and proline were measured. Results and Discussion: According to the results, significant differences were observed between different irrigation treatments for all measured parameters. The highest level of stem growth, leaf umber and leaf area were detected in control treatment (100% field capacity, while the lowest contents were observed in severe stress (25% field capacity. The results showed that the fresh and dry weight of shoot and root decreased with increasing drought stress, so that the lowest amounts were observed in severe stress treatment (25% field capacity. The levels of relative water content was significantly affected by different irrigation treatments, since treated plants with severe stress treatment (25% field capacity had the lowest relative water values, while the highest levels was observed in control treatment (100% field capacity. The highest and lowest of total chlorophyll content was observed in control treatments (100% field capacity and severe stress (25% field capacity

Tradeable emission permits regulations in the presence of imperfectly competitive product markets. Welfare implications

International Nuclear Information System (INIS)

Sartzetakis, E.S.

1997-01-01

In the present paper, we analyse the interaction of a competitive market for emission permits with an oligopolistic product market. It is well known that a competitive permits market achieves the cost minimizing distribution of abatement effort among the polluting firms for a given reduction in emissions. However, when the product market is oligopolistic, it may redistribute production inefficiently among firms. It has been suggested that this inefficiency can outweigh the gains obtained from using emission permits instead of command and control. Although this argument is clearly correct under full information, it is shown in the present paper that it reverses under incomplete information. In particular, it is shown that when tradeable emission permits are specified according to the standard textbook example, they yield higher social welfare than the command and control regulation. 1 fig., 2 appendices, 11 refs

Maximizing productivity of horizontal drilling and completion techniques

Energy Technology Data Exchange (ETDEWEB)

Schein, G. [BJ Services Company, Calgary, AB (Canada)

2007-07-01

There are currently 160 active drilling rigs in the Barnett shale play, and small early developments have now become large-scale operations. This presentation outlined methods currently used to improve the productivity of directional drilling and completion techniques in gas shale plays. Horizontal completions are used to control height growth and increase contact areas. A typical horizontal well casing program was described along with details of cement liner treatment programs. Charts of optimum and non-optimum azimuth wells were included. Increased reservoir contact has been achieved by using limited-entry designs and acid stages with ball-sealers and abrasive jet-cutters. Pump rates have been increased during various stages, and larger fluid and sand volumes were used. A mineralogy comparison was provided, as well as details of the general design criteria for vertical wells in the region. It was concluded that drilling in the Barnett shale play has been successful as a result of using 3-dimensional seismic mapping as well as by initiating multiple, simultaneous fracs. The presentation also included charts of the Arkoma-Woodford play, the Arkoma-Fayetteville play, and the Delaware Basin. tabs., figs.

Forests and wood consumption on the carbon balance. Carbon emission reduction by use of wood products

International Nuclear Information System (INIS)

Sikkema, R.; Nabuurs, G.J.

1995-01-01

Until now studies on the greenhouse effect paid much attention to carbon fixation by forests, while the entire CO2 cycle of forests and forest products remained underexposed. Utilization of wood products instead of energy-intensive materials (plastics/steel) and fossil fuels (coal) proves to play an important role as well. The effect of utilization is even greater than that of fixation. In all, additional forests together with the multiple use of trees can contribute substantially to the reduction of CO2 emissions. The contribution can run from 5.3 ton CO2/ha/yr for a mixed forest of oak/beech to 18.9 ton CO2/ha/yr for energy plantations (poplar). 2 figs., 3 tabs

Stimulation of deep gas wells using HCl/formic acid system : lab studies and field application

Energy Technology Data Exchange (ETDEWEB)

Nasr-El-Din, H.A.; Al-Mutairi, S.; Al-Malki, B. [Saudi Aramco (Saudi Arabia); Metcalf, S.; Walters, W. [BJ Services Co USA, Houston, TX (United States)

2002-06-01

Well stimulation in the deep carbonate Khuff reservoirs in eastern Saudi Arabia is needed to remove drilling mud filter cakes and to enhance reservoir permeability. A non associated gas is being produced from the reservoirs. This gas is associated with the hydrogen sulfide content that varies from 0 to 10-mol per cent. The average reservoir temperature is 275 degrees F and initial reservoir pressure is 7,000 psi. A special system is needed to stimulate the carbonate reservoir because of this high bottomhole temperature and the corrosive nature of hydrochloric acid (HCl) at high temperature. A rotating disk method was used to determine the reaction rate of an HCl/formic acid system with reservoir rocks. Results from coreflood tests showed that the acid system creates deep wormholes in tight reservoir cores. Corrosion tests showed that the well tubulars could tolerate the acid system. A gelled 15-wt per cent HCl/9-wt per cent formic acid system successfully fractured 3 vertical wells in deep sour gas reservoirs without any operational problems. The treatment resulted in significant increases in gas production and flowing wellhead pressures. In addition, overflush of the treatment successfully eliminated the return of live acid after the treatment. 37 refs., 10 tabs., 17 figs.

Formation of secondary products in water purification. ; Toxicological evaluation of mutagenic chlorination by-products during drinking water treatment. Josui shori ni okeru fukuseiseibutsu. ; Josui shori ni okeru hen'i genseibusshitsu no dokusei hyoka

Energy Technology Data Exchange (ETDEWEB)

Nakamuro, K [Setsunan Univ., Osaka (Japan). Faculty of Pharmaceutical Sciences; Sayato, Y [Setsunan Univ., Osaka (Japan)

1993-12-10

The biological effects of acute toxicity, chronic toxicity, carcinogenicity, etc. of chlorination by-products detected in drinking water in Japan are discussed. The biological effects of representative chlorination by-products such as trihalomethane, haloacetic acid, haloaldehyde, haloacetonitrile, chlorophenol, chloropicrin, etc. as well as the evaluation of mutagenicity in drinking water purification process, for which Ames Salmonella/microsome assay is used for safety evaluation of drinking water, are discussed. The extent of the contribution of mutagenicity of chlorination disinfection by-products to the mutagenicity of drinking water is investigated. It must be admitted that biological evaluation of the safety of water quality is impossible currently by using only the known chemical substances contained in drinking water. The effects of chlorination and ozone treatment which are often applied to drinking water treatment are different each other. 58 refs., 1 fig., 4 tabs.

Cross sections for the production of 11C in C targets by 3.65 AGeV projectiles

International Nuclear Information System (INIS)

Kozma, P.; Tolstov, K.D.; Yanovskij, V.V.

1989-01-01

The absolute cross sections for the production of 11 C in C targets by 3.65 AGeV protons, deuterons, 4 He- and 12 C-ions were measured. Annihialtion radiation from 11 C was counted using a large volume NaI(Tl) and BaF 2 detectors. The flux measurement technique based on registration of charged particles by means of a thin nuclear emulsion layer rotating in a beam as well as fission chamber was used. The results are compared with earlier measurements of the cross sections in carbon targets using high-energy projectiles and Glauber theoretical prediction, as well. 10 refs.; 3 figs.; 1 tab

Strangeness production in proton and heavy ion collisions at 200 A GeV

International Nuclear Information System (INIS)

Amelin, N.S.; Bravina, L.V.; Csernai, L.P.; Toneev, V.D.; Gudima, K.K.; Sivoklokov, S.Y.

1992-11-01

Strangeness production at SPS-CERN energies is studied within the Quark Gluon String Model. The observed shape of rapidity and transverse mass distributions are reproduced fairly well for both peripheral and central heavy ion collisions. However, for central collisions the model underpredicts strange particle abundances by a factor of about 2:2:4 for K S 0 , Λ and antiΛ, respectively. This discrepancy can be considered as a possible manifestation of collective string-string interactions similar to the formation of a color rope. Model predictions for coming experiments with the Pb beam at CERN are given. 30 refs. 11 figs., 3 tabs

Production of freely-migrating defects during irradiation

International Nuclear Information System (INIS)

Rehn, L.E.; Okamoto, P.R.

1986-09-01

During irradiation at elevated temperatures, vacancy and interstitial defects that escape can produce several different types of microstructural changes. Hence the production rate of freely-migrating defects must be known as a function of irradiating particle species and energy before quantitative correlations can be made between microstructural changes. Our fundamental knowledge of freely-migrating defect production has increased substantially in recent years. Critical experimental findings that led to the improved understanding are reviewed in this paper. A strong similarity is found for the dependence of freely-migrating defect production on primary recoil energy as measured in a variety of metals and alloys by different authors. The efficiency for producing freely-migrating defects decreases much more strongly with increasing primary recoil energy than does the efficiency for creating stable defects at liquid helium temperatures. The stronger decrease can be understood in terms of additional intracascade recombination that results from the nonrandom distribution of defects existing in the primary damage state for high primary recoil energies. Although the existing data base is limited to fcc materials, the strong similarity in the reported investigations suggests that the same dependence of freely-migrating defect production on primary recoil energy may be characteristic of a wide variety of other alloy systems as well. 52 refs., 4 figs

Development of an advanced, continuous mild gasification process for the production of co-products: Topical report

Energy Technology Data Exchange (ETDEWEB)

Cha, C.Y.; Merriam, N.W.; Jha, M.C.; Breault, R.W.

1988-06-01

Research on mild gasification is discussed. The report is divided into three sections: literature survey of mild gasification processes; literature survey of char, condensibles, and gas upgrading and utilization methods; and industrial market assessment of products of mild gasification. Recommendations are included in each section. (CBS) 248 refs., 58 figs., 62 tabs.

Exercise is more than medicine:The working age population’s well-being and productivity

Institute of Scientific and Technical Information of China (English)

Gisela Sjøgaard; Jeanette Reffstrup Christensen; Just Bendix Justesen; Mike Murray; Tina Dalager; Gitte Hansen Fredslund; Karen Søgaard

2016-01-01

Background: Physical activity (PA) includes muscle activity during exercise, manual work, and leisure time activities including sport. Conflicting results exist regarding health effects of PA that may deteriorate with manual work and elite sports, but improve when performed in moderation in accordance with international guidelines and may additionally enhance well-being and productivity. Methods: In Denmark 15 randomized controlled trials have been conducted, introducing exercise at the workplace enrolling>3500 workers. The interventions lasted from 10 to 52 weeks and offered~1 h weekly supervised exercise during working hours according to the concept of intelligent physical exercise training (IPET) that is based on evidenced sports sciences training principles and tailored to work exposure, employee health status, and physical capacity. Questionnaire surveys and health checks including blood and muscle sampling were performed at baseline and follow-up. The job groups included: office and computer workers, dentists, industrial technicians, cleaning personnel, health care workers, construction workers, and fighter/helicopter pilots. Results: In all job groups significant improvements were documented regarding health outcomes. These were job group specific:neck pain was reduced among office and computer workers, dentists, industrial laboratory technicians, health care workers as well as fighter pilots. Cardio-respiratory fitness—a health risk indicator for cardio-metabolic diseases—was improved among office and computer workers, health care workers, and construction workers. Additionally, other improvements were evidenced such as increased muscle strength and balance control. Importantly, productivity increased with improved muscle strength and decreased body mass index. Conclusion: IPET does enhance health if an exercise program with evidenced efficacy is implemented by expert trainees with support of the employer. Accordingly, in every study group outcomes of

Charmed and strange baryon production in 29 GeV electron positron annihilation

Energy Technology Data Exchange (ETDEWEB)

Klein, S.R.

1988-06-01

This dissertation presents measurements of the production rates of baryons with different strangeness and spin. The analyses presented here use data taken with the Mark III detector at the PEP storage ring, operating at a center of mass energy of 29 GeV. The ..xi../sup /minus// production rate is measured to be 0.017 +- 0.004 +- 0.004 per hadronic event, ..cap omega../sup /minus// production is measured to be 0.014 +- 0.006 +- 0.004 per hadronic event, and ..xi..*/sup 0/ production is less than 0.006 per hadronic event at a 90% confidence level. These measurements place strong constraints on models of baryon production. In particular, the unexpectedly high rate of ..cap omega../sup /minus// production is difficult to explain in any diquark based model. Semileptonic ..lambda../sub c//sup +/ decays have also been observed. Because neither the branching ratios nor the production rate are well known, it is difficult to interpret these results. However, they do indicate that the branching ratio for ..lambda../sub c//sup +/ ..-->.. ..lambda..l..nu.. may be higher than previous experimental measurements. 85 refs., 45 figs., 12 tabs.

Sampling from stochastic reservoir models constrained by production data

Energy Technology Data Exchange (ETDEWEB)

Hegstad, Bjoern Kaare

1997-12-31

When a petroleum reservoir is evaluated, it is important to forecast future production of oil and gas and to assess forecast uncertainty. This is done by defining a stochastic model for the reservoir characteristics, generating realizations from this model and applying a fluid flow simulator to the realizations. The reservoir characteristics define the geometry of the reservoir, initial saturation, petrophysical properties etc. This thesis discusses how to generate realizations constrained by production data, that is to say, the realizations should reproduce the observed production history of the petroleum reservoir within the uncertainty of these data. The topics discussed are: (1) Theoretical framework, (2) History matching, forecasting and forecasting uncertainty, (3) A three-dimensional test case, (4) Modelling transmissibility multipliers by Markov random fields, (5) Up scaling, (6) The link between model parameters, well observations and production history in a simple test case, (7) Sampling the posterior using optimization in a hierarchical model, (8) A comparison of Rejection Sampling and Metropolis-Hastings algorithm, (9) Stochastic simulation and conditioning by annealing in reservoir description, and (10) Uncertainty assessment in history matching and forecasting. 139 refs., 85 figs., 1 tab.

Well-plate freeze-drying

DEFF Research Database (Denmark)

Trnka, Hjalte; Rantanen, Jukka; Grohganz, Holger

2015-01-01

Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well-plates as a h......Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well......-plates as a high throughput platform for formulation screening of freeze-dried products. Methods: Model formulations consisting of mannitol, sucrose and bovine serum albumin were freeze-dried in brass well plates, plastic well plates and vials. Physical properties investigated were solid form, residual moisture......, cake collapse and reconstitution time. Results: Samples freeze-dried in well-plates had an acceptable visual cake appearance. Solid form analysis by high throughput X-ray powder diffraction indicated comparable polymorphic outcome independent of the container. The expected increase in moisture level...

Production of strange particles in hadronization processes

International Nuclear Information System (INIS)

Hofmann, W.

1987-08-01

Strange particles provide an important tool for the study of the color confinement mechanisms involved in hadronization processes. We review data on inclusive strange-particle production and on correlations between strange particles in high-energy reactions, and discuss phenomenological models for parton fragmentation. 58 refs., 24 figs

Lepton-pair production in hadron-nucleus collisions

International Nuclear Information System (INIS)

Moss, J.M.; Peng, J.C.; Alde, D.M.

1989-01-01

Physics motivations for precision measurements of lepton pair production in nuclei are discussed. Preliminary results from Fermilab Experiment E772 are presented. The relevance of these results to the EMC effect and to J/ψ suppression in heavy ion collisions is also discussed. 34 refs., 17 figs

Correlation of recent fission product release data

International Nuclear Information System (INIS)

Kress, T.S.; Lorenz, R.A.; Nakamura, T.; Osborne, M.F.

1989-01-01

For the calculation of source terms associated with severe accidents, it is necessary to model the release of fission products from fuel as it heats and melts. Perhaps the most definitive model for fission product release is that of the FASTGRASS computer code developed at Argonne National Laboratory. There is persuasive evidence that these processes, as well as additional chemical and gas phase mass transport processes, are important in the release of fission products from fuel. Nevertheless, it has been found convenient to have simplified fission product release correlations that may not be as definitive as models like FASTGRASS but which attempt in some simple way to capture the essence of the mechanisms. One of the most widely used such correlation is called CORSOR-M which is the present fission product/aerosol release model used in the NRC Source Term Code Package. CORSOR has been criticized as having too much uncertainty in the calculated releases and as not accurately reproducing some experimental data. It is currently believed that these discrepancies between CORSOR and the more recent data have resulted because of the better time resolution of the more recent data compared to the data base that went into the CORSOR correlation. This document discusses a simple correlational model for use in connection with NUREG risk uncertainty exercises. 8 refs., 4 figs., 1 tab

Production measurements on the quadrupole correctors for the new Low- Beta System for the Tevatron Collider

International Nuclear Information System (INIS)

Mokhtarani, A.; Brown, B.C.; Hanft, R.; Oleck, A.R.; Peterson, T.; Turkot, F.

1991-05-01

Each of the Low Beta Systems for the Tevatron Collider requires 12 spool pieces; eight of the spool pieces contain superconducting quadrupoles as part of the low beta insertion as well as standard correction magnets. The remaining four provide correction magnets, beam position monitors, and current feeds for the neighboring low beta main quadrupoles. Thirty-two of these new spools have been fabricated. We describe here the mechanical, cryogenic and magnetic properties of these new spools as determined in the production test and measurement activities. 8 refs., 7 figs., 1 tab

Sediment–well interaction during depressurization

KAUST Repository

Shin, Hosung

2016-10-05

Depressurization gives rise to complex sediment–well interactions that may cause the failure of wells. The situation is aggravated when high depressurization is imposed on sediments subjected to an initially low effective stress, such as in gas production from hydrate accumulations in marine sediments. Sediment–well interaction is examined using a nonlinear finite element simulator. The hydro-mechanically coupled model represents the sediment as a Cam-Clay material, uses a continuous function to capture compressibility from low to high effective stress, and recognizes the dependency of hydraulic conductivity on void ratio. Results highlight the critical effect of hydro-mechanical coupling as compared to constant permeability models: A compact sediment shell develops against the screen, the depressurization zone is significantly smaller than the volume anticipated assuming constant permeability, settlement decreases, and the axial load on the well decreases; in the case of hydrates, gas production will be a small fraction of the mass estimated using a constant permeability model. High compressive axial forces develop in the casing within the production horizon, and the peak force can exceed the yield capacity of the casing and cause its collapse. Also tensile axial forces may develop in the casing above the production horizon as the sediment compacts in the depressurized zone and pulls down from the well. Well engineering should consider: slip joints to accommodate extensional displacement above the production zone, soft telescopic/sliding screen design to minimize the buildup of compressive axial force within the production horizon, and enlarged gravel pack to extend the size of the depressurized zone.

Isotopes and their possible use as bio markers of microbial products

International Nuclear Information System (INIS)

Zyakun, A.M.

1992-01-01

The purpose of this presentation is to determine the range of possible variations in the distribution of carbon isotopes ( 12 C and 13 C) in the metabolic products of the basic biological systems (production of organic matter by photosynthetic bacteria, its consumption by heterotrophic organisms, biological production of methane, its utilization by methanotrophic organisms, biological production of carbon monoxide and its bacterial oxidation). 32 refs., 11 figs., 3 tabs

Encyclopedia of well logging

International Nuclear Information System (INIS)

Desbrandes, R.

1985-01-01

The 16 chapters of this book aim to provide students, trainees and engineers with a manual covering all well-logging measurements ranging from drilling to productions, from oil to minerals going by way of geothermal energy. Each chapter is a summary but a bibliography is given at the end of each chapter. Well-logging during drilling, wireline logging equipment and techniques, petroleum logging, data processing of borehole data, interpretation of well-logging, sampling tools, completion and production logging, logging in relief wells to kill off uncontrolled blowouts, techniques for high temperature geothermal energy, small-scale mining and hydrology, logging with oil-base mud and finally recommended logging programs are all topics covered. There is one chapter on nuclear well-logging which is indexed separately. (UK)

Wood fuel production technologies in EU countries

Energy Technology Data Exchange (ETDEWEB)

Hakkila, P [Finnish Forest Research Institute, Vantaa (Finland)

1998-12-31

The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

Wood fuel production technologies in EU countries

Energy Technology Data Exchange (ETDEWEB)

Hakkila, P. [Finnish Forest Research Institute, Vantaa (Finland)

1997-12-31

The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

Irradiation of poultry meat and its products

International Nuclear Information System (INIS)

Klinger, I.; Lapidot, M.

1992-02-01

Modern poultry production methods provide many opportunities for microbial contamination, and poultry meat is considered to have a high bacterial load. This document describes means by which poultry meat can be decontaminated, placing especial emphasis on the use of ionizing radiation. Separate chapters describe the irradiation process, methods for detecting whether the food has been irradiated, the wholesomeness of the irradiated products and the regulatory aspects of poultry irradiation. 441 refs, 35 figs, 16 tabs

Interpretation of horizontal well performance in complicated systems by the boundary element method

Energy Technology Data Exchange (ETDEWEB)

Jongkittinarukorn, K.; Tiab, D. [Oklahoma Univ., School of Petroleum and Geological Engineering (United States); Escobar, F. H. [Surcolombiana Univ., Dept. of Petroleum Engineering (Colombia)

1998-12-31

A solution obtained by using the boundary element method to simulate pressure behaviour of horizontal wells in complicated reservoir-wellbore configurations is presented. Three different types of well bore and reservoir models were studied, i.e. a snake-shaped horizontal wellbore intersecting a two-layer reservoir with cross flow, a horizontal well in a three-layer reservoir with cross flow, and a vertical well intersecting a two-layer reservoir without cross flow. In each case, special attention was paid to the influence of wellbore inclination angle, the distance from the wellbore to the different boundaries and the permeability ratio. Performance of each of these types of wells are discussed. 9 refs., 18 figs.

Hydrogeologic testing plan for Deep Hydronest Test Wells, Deaf Smith County site, Texas

International Nuclear Information System (INIS)

1987-12-01

This report discusses methods of hydraulic testing which are recommended for use in the Deep Hydronest Test Wells at the proposed high level nuclear waste repository site in Deaf Smith County, Texas. The deep hydronest wells are intended to provide geologic, geophysical and hydrologic information on the interval from the Upper San Andres Formation to the base of the Pennsylvanian system at the site. Following the period of drilling and testing, the wells will be converted into permanent monitoring installations through which fluid pressures and water quality can be monitored at various depths in the section. 19 refs., 17 figs., 2 tabs

Comparisons of host mitochondrial, nuclear and endosymbiont bacterial genes reveal cryptic fig wasp species and the effects of Wolbachia on host mtDNA evolution and diversity

Directory of Open Access Journals (Sweden)

Feng Gui

2011-04-01

Full Text Available Abstract Background Figs and fig-pollinating wasp species usually display a highly specific one-to-one association. However, more and more studies have revealed that the "one-to-one" rule has been broken. Co-pollinators have been reported, but we do not yet know how they evolve. They may evolve from insect speciation induced or facilitated by Wolbachia which can manipulate host reproduction and induce reproductive isolation. In addition, Wolbachia can affect host mitochondrial DNA evolution, because of the linkage between Wolbachia and associated mitochondrial haplotypes, and thus confound host phylogeny based on mtDNA. Previous research has shown that fig wasps have the highest incidence of Wolbachia infection in all insect taxa, and Wolbachia may have great influence on fig wasp biology. Therefore, we look forward to understanding the influence of Wolbachia on mitochondrial DNA evolution and speciation in fig wasps. Results We surveyed 76 pollinator wasp specimens from nine Ficus microcarpa trees each growing at a different location in Hainan and Fujian Provinces, China. We found that all wasps were morphologically identified as Eupristina verticillata, but diverged into three clades with 4.22-5.28% mtDNA divergence and 2.29-20.72% nuclear gene divergence. We also found very strong concordance between E. verticillata clades and Wolbachia infection status, and the predicted effects of Wolbachia on both mtDNA diversity and evolution by decreasing mitochondrial haplotypes. Conclusions Our study reveals that the pollinating wasp E. verticillata on F. microcarpa has diverged into three cryptic species, and Wolbachia may have a role in this divergence. The results also indicate that Wolbachia strains infecting E. verticillata have likely resulted in selective sweeps on host mitochondrial DNA.

Farco Mining makes productivity gains using emulsion-Anfo blends

Energy Technology Data Exchange (ETDEWEB)

Lewis, N. [Nelson Brothers, Inc., Parrish, AL (United States)

1995-02-01

Describes the use of a 40:60 emulsion: Auto blend for overburden removal at Farco Minings surface coal mine near Laredo, Texas. The use of this explosives mixture maximized the explosive per foot of blasthole, increasing overburden removal to 925,000 buy per month and improving mine productivity. Increases in powder factors produced further increases in cast yardage and mine production. 2 figs.

Measurement results of BHTV logging at the geothermal well. 1; Chinetsusei ni okeru BHTV kenso no sokutei kekka. 1

Energy Technology Data Exchange (ETDEWEB)

Lin, S. [Geophysical Surveying and Consulting Co. Ltd., Tokyo (Japan); Nakanishi, S.; Shimizu, I. [Electric Power Development Co. Ltd., Tokyo (Japan)

1997-05-27

In association with excavation of the No. 135 steam producing well in the Onikubi geothermal power plant in Miyagi Prefecture, shapes of production zones and drilling-induced fracture (DIF) were acquired from the borehole televiewer (BHTV) data. The BHTV logging shoots sound waves onto well walls of wells filled with fluid and detects the reflection waves to investigate the state of the well walls. Vertical fracture with opening lengths from 2 to 3 m were found at depths of about 1232 m and 1312 m. Water run-off has occurred at a depth of about 1312 m during the excavation, to which these vertical fractures might have contributed possibly. In depths of about 1232 m and 1312 m, fractures inclining toward north-east direction and south-west direction are predominant. Some fractures in the depth of about 1333 m incline toward east-south-east direction and west-north-west direction. Fracture inclination azimuth in all of the present logging sections is predominantly in north-east direction and south-west direction. When the DIF is considered to show the maximum compression azimuth, the earth`s crust stress azimuth is generally in east-west direction, which crosses slightly obliquely with the running direction of the predominant fracture in this well. 1 ref., 7 figs.

Intermittency in multiparticle production analyzed by means of stochastic theories

International Nuclear Information System (INIS)

Bartl, A.; Suzuki, N.

1990-01-01

Intermittency in multiparticle production is described by means of probability distributions derived from pure birth stochastic equations. The UA1, TASSO, NA22 and cosmic ray data are analyzed. 24 refs., 1 fig. (Authors)

SAGD production optimization : combination of ESP and multiphase metering

Energy Technology Data Exchange (ETDEWEB)

Pinguet, B.G.; Guerra, E.; Drever, C. [Schlumberger Canada Ltd., Edmonton, AB (Canada)

2008-07-01

Many commercial oil reservoirs in Canada are completed using electric submersible pumps (ESP) due to low reservoir pressures and extra heavy oils and bitumens. This paper presented details of an optimization process for steam-assisted gravity drainage (SAGD) wells. The process used ESP and a multiphase flow meter (MFM) based on Vx technology. The MFM was based on a Venturi and nuclear fraction meter combination that was engineered to measure the steam phases during SAGD processes. The technology was designed to measure total mass or total volumetric flow rates as well as oil, water and gas in producing wells. Length fractions of oil, water, and gas were calculated based on the attenuation of Gamma-rays as they passed through the Venturi section. Production was optimized in real time using the frequency control of the pump to improve oil flow rates. The results of field tests showed that the optimization process resulted in longer life cycles for the ESP. It was concluded that use of the meter results in changes to lift system operating parameters at the well site as well as improved monitoring during the workflow process. 3 refs., 1 tab., 11 figs.

Radioactivity distribution of the fruit trees ascribable to radioactive fall out (6). Effect of heterogeneity of caesium-137 concentration in soil on transferability to grape trees and fig trees

International Nuclear Information System (INIS)

Takata, Daisuke; Yasunaga, Eriko; Tanoi, Keitaro

2013-01-01

We examined the effects of the heterogeneity of 137 Cs concentration in soil on transferability to shallow rooted fig and non-shallow rooted grapes. Three-year-old trees were planted into the pots filled with soil changed to the concentration of radioactivity Cs in surface (0 - 5cm) and deep soil (5 - 15cm). Transfer rate of radioactive 137 Cs to plants from the soil was higher in fig than in grapes when grown under the same conditions. In fig trees, transfer rate of radioactive 137 Cs to plants from the soil was higher the plants cultivated under high concentration of 137 Cs in surface soil than in deep soil. (author)

Western Canadian wood residue production and consumption trends

International Nuclear Information System (INIS)

McCloy, B.

2006-01-01

This presentation considered various trends in western Canadian wood residue production and consumption. Potential markets for wood residue products were also discussed. Trends were reviewed by province for the years 2000-2004. British Columbia (BC) is currently the largest producer of residue in the country, and also retains the largest surpluses of bark, sawdust and shavings. Wood residues in BC are used in pulp and plywood mill production, as well as in the creation of particleboard and MDF. Surplus mill wood residue production in the province has greatly increased due to the Mountain Pine Beetle (MPB) infestation, which has in turn spurred expansion of the BC interior sawmill industry. The infestation has also resulted in a glut of pulp chips. Current wood residue products in Alberta are mostly used in pulp mill combined heat and power (CHP) systems, as well as for wood pellet production and the creation of particleboard and MDF. It was noted that surplus residues are rapidly declining in the province. Saskatchewan's wood residue storage piles are estimated to contain 2,900,000 BDt, while Manitoba surpluses are relatively minor. It was suggested that high natural gas prices have increased the payback on wood energy systems to approximately 2 years. The value of wood residue is now greater than $100/BDt as a substitute for natural gas once the wood energy system has been fully depreciated. Sawmills may now wish to consider equipping themselves to sell wood residue products, as most sawmills only require 20 per cent of their residues for heating purposes. It was concluded that markets for hog fuel wood pellets should be developed in Canada and internationally. Future markets may also develop if natural gas currently used in pulp mill power boilers and lime kilns is replaced with wood residue energy systems. refs., tabs., figs

Impact of hydraulic well restoration on native bacterial communities in drinking water wells.

Science.gov (United States)

Karwautz, Clemens; Lueders, Tillmann

2014-01-01

The microbial monitoring of drinking water production systems is essential to assure water quality and minimize possible risks. However, the comparative impact of microbes from the surrounding aquifer and of those established within drinking water wells on water parameters remains poorly understood. High pressure jetting is a routine method to impede well clogging by fine sediments and also biofilms. In the present study, bacterial communities were investigated in a drinking water production system before, during, and after hydraulic purging. Variations were observed in bacterial communities between different wells of the same production system before maintenance, despite them having practically identical water chemistries. This may have reflected the distinct usage practices of the different wells, and also local aquifer heterogeneity. Hydraulic jetting of one well preferentially purged a subset of the dominating taxa, including lineages related to Diaphorobacter, Nitrospira, Sphingobium, Ralstonia, Alkanindiges, Janthinobacterium, and Pseudomonas spp, suggesting their tendency for growth in well-associated biofilms. Lineages of potential drinking water concern (i.e. Legionellaceae, Pseudomonadaceae, and Acinetobacter spp.) reacted distinctly to hydraulic jetting. Bacterial diversity was markedly reduced in drinking water 2 weeks after the cleaning procedure. The results of the present study provide a better understanding of drinking water wells as a microbial habitat, as well as their role in the microbiology of drinking water systems.

Impact of Hydraulic Well Restoration on Native Bacterial Communities in Drinking Water Wells

Science.gov (United States)

Karwautz, Clemens; Lueders, Tillmann

2014-01-01

The microbial monitoring of drinking water production systems is essential to assure water quality and minimize possible risks. However, the comparative impact of microbes from the surrounding aquifer and of those established within drinking water wells on water parameters remains poorly understood. High pressure jetting is a routine method to impede well clogging by fine sediments and also biofilms. In the present study, bacterial communities were investigated in a drinking water production system before, during, and after hydraulic purging. Variations were observed in bacterial communities between different wells of the same production system before maintenance, despite them having practically identical water chemistries. This may have reflected the distinct usage practices of the different wells, and also local aquifer heterogeneity. Hydraulic jetting of one well preferentially purged a subset of the dominating taxa, including lineages related to Diaphorobacter, Nitrospira, Sphingobium, Ralstonia, Alkanindiges, Janthinobacterium, and Pseudomonas spp, suggesting their tendency for growth in well-associated biofilms. Lineages of potential drinking water concern (i.e. Legionellaceae, Pseudomonadaceae, and Acinetobacter spp.) reacted distinctly to hydraulic jetting. Bacterial diversity was markedly reduced in drinking water 2 weeks after the cleaning procedure. The results of the present study provide a better understanding of drinking water wells as a microbial habitat, as well as their role in the microbiology of drinking water systems. PMID:25273229

Sustainable development of lignite production on open cast mines in Serbia

Energy Technology Data Exchange (ETDEWEB)

Darko Danicic; Slobodan Mitrovic; Vladimir Pavlovic; Sava Kovacev [Kolubara Metal, Vreoci (Serbia)

2009-09-15

Currently operated coalmines in Serbia (Kolubara and Kostolac) have production around 36 million tons of lignite, and over 108 million m{sup 3} of overburden. Consequently, sustainability of lignite production requires cost reduction and environmental protection, as well as capacity increase. In order to rationalise, and increase efficiency of Serbian lignite mines, it is necessary to focus the activities on major issues shown within the triangle of energy policy objectives (security of supply, competitive prices and environmental protection). Production process optimisation singled out several special programs. Equipment revitalization and modernization is necessary taking into account that majority of the currently operated machinery has a life up to 25 years. Production process automation would enable high level of technical operation in the field of open cast mines management. Lack of coal quality uniformity is the permanent problem resulting by great amounts of coal reserves to be used uneconomically. Planning and training at all levels and finally cooperative software for business procedures and work order management. The measures suggested are a key precondition for maintaining competitive position of lignite production on international level. 7 refs., 5 figs., 1 tab.

Production of heavy flavours at the next-to-leading order

International Nuclear Information System (INIS)

Nason, P.; Ridolfi, G.; Frixione, S.; Mangano, M.L.

1993-01-01

The status of next-to-leading calculations of heavy quark production is reviewed. In particular, results on the doubly-differential cross section for the photoproduction of heavy flavours are discussed. The possibility of using heavy flavour production in order to determine the gluon density in the proton at HERA is also discussed. 3 figs., 22 refs

Radiative corrections to top and bottom production at collider energies

International Nuclear Information System (INIS)

Dawson, S.

1988-10-01

We discuss the results of a full calculation of the QCD O(α 8 /sup s/) radiative corrections to the differential cross section for the production of a heavy quark pair. Numerical results are presented for bottom and top production in p/bar p/ collisions at /square root/s = 1.8 TeV. 2 refs., 2 figs

Growth and Electrical and Far-Infrared Properties of Wide Electron Wells in Semiconductors

Science.gov (United States)

1994-04-15

H (T) FIG. 2. Magnetoresisrance and Halal effect data for sample SL6. t0.1. 0 2 4 0 3 10 12 14Oxford Model 200 dilution refrigerator. Using standard...x-N GacAs/ reverse bias at an adjacent Schottky barrier and sweeping JAfhM~l~ abrupts beserjuncdoo are shown. The true profits sb the edge of the...A , n•.o2 0.3 at the edges further provides a square well like confine- meat when the parabolic well is exactly filled or overfilled. All samples

ESTABLISHMENT OF AN INDUSTRY-DRIVEN CONSORTIUM FOCUSED ON IMPROVING THE PRODUCTION PERFORMANCE OF DOMESTIC STRIPPER WELLS

Energy Technology Data Exchange (ETDEWEB)

Joel L. Morrison

2001-09-12

The Pennsylvania State University, under contract to the US Department of Energy, National Energy Technology Laboratory will establish, promote, and manage a national industry-driven Stripper Well Consortium (SWC) that will be focused on improving the production performance of domestic petroleum and/or natural gas stripper wells. the consortium creates a partnership with the US petroleum and natural gas industries and trade associations, state funding agencies, academia, and the National Energy Technology Laboratory. This report serves as the third quarterly technical progress report for the SWC. During this reporting period the SWC entered into a co-funding arrangement with the New York State Energy Development Authority (NYSERDA) to provide an additional $100,000 in co-funding for stripper well production-orientated projects.The SWC hosted its first meeting in which members proposed research projects to the SWC membership. The meeting was held on April 9-10, 2001 in State College, Pennsylvania. Twenty three proposals were submitted to the SWC for funding consideration. Investigators of the proposed projects provided the SWC membership with a 20 minute (15 minute technical discussion, 5 minute question and answer session) presentation. Of the 23 proposals, the Executive Council approved $921,000 in funding for 13 projects. Penn State then immediately started the process of issuing subcontracts to the various projects approved for funding.

ESTABLISHMENT OF AN INDUSTRY-DRIVEN CONSORTIUM FOCUSED ON IMPROVING THE PRODUCTION PERFORMANCE OF DOMESTIC STRIPPER WELLS

International Nuclear Information System (INIS)

Joel L. Morrison

2001-01-01

The Pennsylvania State University, under contract to the US Department of Energy, National Energy Technology Laboratory will establish, promote, and manage a national industry-driven Stripper Well Consortium (SWC) that will be focused on improving the production performance of domestic petroleum and/or natural gas stripper wells. the consortium creates a partnership with the US petroleum and natural gas industries and trade associations, state funding agencies, academia, and the National Energy Technology Laboratory. This report serves as the third quarterly technical progress report for the SWC. During this reporting period the SWC entered into a co-funding arrangement with the New York State Energy Development Authority (NYSERDA) to provide an additional$100,000 in co-funding for stripper well production-orientated projects.The SWC hosted its first meeting in which members proposed research projects to the SWC membership. The meeting was held on April 9-10, 2001 in State College, Pennsylvania. Twenty three proposals were submitted to the SWC for funding consideration. Investigators of the proposed projects provided the SWC membership with a 20 minute (15 minute technical discussion, 5 minute question and answer session) presentation. Of the 23 proposals, the Executive Council approved$921,000 in funding for 13 projects. Penn State then immediately started the process of issuing subcontracts to the various projects approved for funding

Development of independent production in Europe: institutional diversity

International Nuclear Information System (INIS)

Krause, G.G.

1995-01-01

The industrial model of the power sector is being challenged in all but a few countries. Being stable for many years, the power sector is now constrained to evolve to more flexible structures, pushed by financing, political and environmental issues. More so, recent innovations within the financing or entrepreneurial background, as well as in the main equipment suppliers' strategies, have attracted new actors to a formerly closed sector. The independent power production could be seen as a vector leading sector's reforms in several countries, being recognized an a careful path, a way to gradually opening the sector. The analysis of the institutional structures within which the independent production evolves can point out relevant elements and directions of sector's changes. One can find, for instances, within a relatively restraint universe, i.e. that one of the European countries, a variety of situations putting light on the complexity of the debate. This paper aims at discussing the role of the independent power production through such a diversity of institutional structures, avoiding any polarization around themes like privatization or deregulation. (author). 1 fig., 2 tabs., 13 refs

Establishing an ethanol production business

International Nuclear Information System (INIS)

1993-01-01

Many Saskatchewan communities are interested in the potential benefits of establishing an ethanol production facility. A guide is presented to outline areas that communities should consider when contemplating the development of an ethanol production facility. Political issues affecting the ethanol industry are discussed including environmental impacts, United States legislation, Canadian legislation, and government incentives. Key success factors in starting a business, project management, marketing, financing, production, physical requirements, and licensing and regulation are considered. Factors which must be taken into consideration by the project manager and team include markets for ethanol and co-products, competent business management staff, equity partners for financing, production and co-product utilization technologies, integration with another facility such as a feedlot or gluten plant, use of outside consultants, and feedstock, water, energy, labour, environmental and site size requirements. 2 figs., 2 tabs

Three essays on productivity and risk, marketing decisions, and changes in well-being over time

OpenAIRE

Larochelle, Catherine

2011-01-01

This dissertation is composed of three essays; the first two examine the decision-making of potato producing households in Bolivia and the third examines well-being changes among Zimbabwe households. The first essay entitled â The role of risk mitigation in production efficiency: A case study of potato cultivation in the Bolivian Andesâ estimates the costs of self-managing environmental risk through activity and environmental diversification. Risk management has the potential to reduce in...

Radiosterilization of medical products, pharmaceuticals and bioproducts

International Nuclear Information System (INIS)

1967-01-01

A Panel on the Radiosterilization of Medical Products, Pharmaceuticals and Bioproducts was convened by the International Atomic Energy Agency on 17-19 January 1966 at its headquarters in Vienna. The purpose of the meeting was to survey the activities of the Member States in this field with a view to preparing the way for an international code of practice for the radiosterilization of medical products, in conformity with existing legal international rules. Refs, figs and tabs

SSC [Superconducting Super Collider] dipole coil production tooling

International Nuclear Information System (INIS)

Carson, J.A.; Barczak, E.J.; Bossert, R.C.; Brandt, J.S.; Smith, G.A.

1989-03-01

Superconducting Super Collider dipole coils must be produced to high precision to ensure uniform prestress and even conductor distribution within the collared coil assembly. Tooling is being prepared at Fermilab for the production of high precision 1M and 16.6M SSC dipole coils suitable for mass production. The design and construction methods builds on the Tevatron tooling and production experience. Details of the design and construction methods and measured coil uniformity of 1M coils will be presented. 4 refs., 10 figs

URANIUM 1991 resources, production and demand

International Nuclear Information System (INIS)

1992-01-01

The uranium supply aspects of the nuclear fuel cycle have undergone considerable change during the last few years. Nuclear power generating capacity can continue to expand only if there is confidence in the final supply of uranium. This report presents governmental compilations of uranium resource and production data, as established in 1991. It also presents short-term projections of the nuclear industry future natural uranium requirements and reviews the status of uranium exploration, resources and production throughout the world. 10 refs., 14 figs., 15 tabs., 6 appendices

Field study of completion fluids to enhance gas production in the Barnett Shale

Energy Technology Data Exchange (ETDEWEB)

Penny, G.S.; Pursley, J.T. [CESI Chemical, Houston, TX (United States); Clawson, T.D. [Antero Resources Corp., Denver, CO (United States)

2006-07-01

In the mid 1990s, the initial Barnett shale wells were completed with massive hydraulic fracturing treatments. Light sand fracturing in slick water consisting of water and friction reducer was used in order to reduce stimulation costs without reducing production. Field and lab data were presented for commonly used fluids pumped in the Barnett Shale. An evaluation of these surfactants as well as a microemulsion system was also conducted. An illustration of how the microemulsion system speeds up the cleanup of injected fluids in tight gas cores was presented, Overall, the study treated and analysed over 200 wells and made side by side comparisons of treatment variations. Laboratory studies that were presented included leakoff control, capillary end effect control, relative permeability and fracture cleanup. The field studies in the Barnett Shale provided the following information: a geological overview, a description of the Barnett Shale fracturing/refracturing program, and evaluation of production data. It was concluded that water saturation decreased and relative permeability to gas improved as evidenced through the core data. The study also showed that including the microemulsion in low permeability gas cores would cut the capillary pressure by half. 12 refs., 16 figs., 3 tabs.

The effects of processing non-timber forest products and trade partnerships on people's well-being and forest conservation in Amazonian societies.

Directory of Open Access Journals (Sweden)

Carla Morsello

Full Text Available This study evaluated whether processing non-timber forest products (NTFPs and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income. In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results

The effects of processing non-timber forest products and trade partnerships on people's well-being and forest conservation in Amazonian societies.

Science.gov (United States)

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of

The Effects of Processing Non-Timber Forest Products and Trade Partnerships on People's Well-Being and Forest Conservation in Amazonian Societies

Science.gov (United States)

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of

Targets for production of high-intensity radioactive ion-beams

International Nuclear Information System (INIS)

Hagebo, E.; Hoff, P.; Steffensen, K.

1991-01-01

The recent developments of target systems for production of high intensity radioactive ion-beams at the ISOLDE mass separators is described. Methods for chemically selective production through separation of molecular ions are outlined and the effects of the addition of reactive gases has been studied. Results and further possible applications in the light element region are discussed. (author) 10 refs.; 9 figs.; 1 tab

Quantum-well exciton dipolar interaction: Polarization-dependence and Z-LT splitting

International Nuclear Information System (INIS)

Nguyen Ba An.

1996-12-01

We calculate the exciton dipolar interaction in a semiconductor quantum well. The explicit polarization-dependence, i.e, the dependence on both the exciton dipole moment μ-vector and its inplane wavevector k-vector is derived. The obtained results for the three modes (L, T and Z modes) of the long-range part of the dipolar interaction satisfy the polarization sum rule for any parameters. In the long wavelength limit there is a Z-LT splitting which decreases as the well width increases reflecting a crossover from strict 2D to quasi-2D. A rough crossover from quasi-2D to 3D is also described. (author). 18 refs, 4 figs

Case study : a real-time collaborative workflow for geosteering a horizontal well offshore eastern Canada

Energy Technology Data Exchange (ETDEWEB)

Cutler, M.; Pineda, G. [Halliburton Energy Services, Bakersfield, CA (United States)

2002-06-01

A horizontal well can be geologically steered using a forward modelling geosteering software that helps determine the stratigraphic position of the drillstring and interpret the well in the reservoir. The software shows reservoir engineers how to maximize the pay zone, optimize the well path, characterize reservoir properties and avoid entering undesired beds or fluid contacts. The best way to maximize the pay zone is to use an integrated arrangement of formation evaluation tools, software and reservoir engineering expertise. This paper presents a series of measurements while drilling and logging. Drilling (MWD/LWD) tools obtain real-time data and forward modelling while drilling software. When interpreted by a trained specialist, these tools help in decision making processes regarding reservoir depletion. The paper presents a case study from offshore eastern Canada in which a well was drilled horizontally from a semi-submersible mobile drilling unit. StrataSteer {sup TM}, a software tool developed by Halliburton Energy Services, was used to interpret the LWD data. The software is compatible with other downhole tools and the INSITE information system which provides real-time data. The objective of the study is to demonstrate the capabilities of the forward modelling tool while drilling the well. A computer was set up at the client's office and at the offshore rig site. The geological model which was constructed using the acquired data was then used to make real-time collaborative decisions to land the well correctly in the reservoir, maximize the productive interval, optimize the well path, and analyze the reservoir properties. However, it was noted that due to geological uncertainty, the objectives in this well were not achieved. 6 figs.

Deposition of naturally occurring radioactivity in oil and gas production

International Nuclear Information System (INIS)

Lysebo, I.; Strand, T.

1997-01-01

This booklet contains general information about naturally occurring radioactive materials, NORM, in production of oil and natural gas, occupational doses, radiation protection procedures and measures, and classification methods of contaminated equipment. 6 refs., 1 fig., 1 tab

Western Canada drilling barely keeping pace with production replacement

International Nuclear Information System (INIS)

Russum, D.

2006-01-01

This presentation provided a unique perspective of gas exploration, production and expectations in the Western Canada Sedimentary Basin (WCSB). For the past several years, approximately 80 per cent of Canada's natural gas production has come from Alberta. In order to sustain this production level, greater activity is needed in the large and mature fields where conventional production is in decline. Rising gas prices resulting from tight supply in North America are providing incentive for additional activity, particularly in small, unconventional gas pools. The trend away from large, conventional gas pools has resulted in a decline in average well productivity. Continuing this trend will become more challenging and costly to sustain in the coming years, particularly since the oil and gas industry in Canada is already encountering manpower limitations, climate change, stringent environmental standards, and resistance from the general public. The author cautioned that the low cost and finite natural gas resource has been squandered in North America since the 1980s. The challenge now is to carefully consider how much gas can be produced in the future, but also at a cost that the consumer will pay in the global market. It was suggested that in addition to ensuring that domestic consumption and exports are targeted on the most efficient and value-added outcomes, Alberta's and Canada's energy plan should recognize the limitations of natural gas production. figs

Employee wellness program evaluation.

Science.gov (United States)

2008-12-01

Well-designed wellness programs can keep healthy employees healthy, support employees with : health risks to improve their health behaviors, and facilitate organizational efforts to achieve : workforce performance goals. : Productivity lost through a...

A system for use in offshore petroleum production; System for anvendelse ved offshore petroleumsproduksjon

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Mjoeen, S.A.; Smedal, A.; Syvertsen, K.

1994-10-31

The invention relates to a system for use in offshore oil and gas production from production wells on the sea bed. The system comprises a submerged buoy having an outer buoyancy member which is arranged for introduction and releasable fastening in a submerged, downwardly open receiving space in a vessel, and a central member which is rotatably mounted in the outer member and is anchored to the sea bed and is connected to at least one transfer line extending from a respective production well up to the buoy, a shaft extending between the receiving space and the deck of the vessel. The system comprises a swivel unit which is installed at the lower end of the shaft so that it is limitedly raisable and lowerable, and which is connected to a tube system on the vessel, the swivel unit comprising inner and outer mutually rotatable swivel members and at its underside is provided with a number of coupling heads for interconnection with corresponding connectors arranged at the upper ends of the topical number of transfer lines, these lines at their upper end being suspended at the upper end of the central member of the buoy. 6 figs.

A system for use in offshore petroleum production; System for anvendelse ved offshore petroleumsproduksjon

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.G.; Mjoeen, S.A.; Smedal, A.; Syvertsen, K.

1997-07-08

The invention concerns a system for use in offshore oil and gas production from production wells on the sea bed. The system comprises a submerged buoy having an outer buoyancy member which is arranged for introduction and releasable fastening in a submerged, downwardly open receiving space in a vessel, and a central member which is rotatory mounted in the outer member and is anchored to the sea bed and is connected to at least one transfer line extending from a respective production well up to the buoy, and a shaft extending between the receiving space and the deck of the vessel. The system includes a swivel unit which is installed at the lower end of the shaft so that it is limitedly raising and lowering, and which is connected to a tube system on the vessel. The swivel unit comprises inner and outer mutually rotatable swivel members and at its underside is provided with a number of coupling heads for interconnection with corresponding connectors arranged at the upper ends of the topical number of transfer lines. These lines are suspended at the upper end of the central member of the buoy. 6 figs.

Enhancing oil rate in solvent vapour extraction processes through tee-well pattern

Energy Technology Data Exchange (ETDEWEB)

Zeng, F.; Knorr, K.D.; Wilton, R.R. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Saskatchewan Research Council, Saskatoon, SK (Canada)

2008-10-15

In order for the vapour extraction (VAPEX) process to be considered commercially viable, the production flow rate in classical VAPEX must be increased. The low flow rate can be attributed to the fact that the classical VAPEX process uses forces of buoyancy to distribute the solvent and gravity to drain the diluted oil to the producer. This paper presented a new well pattern, referred to as the tee-SVX process, that may enhance the oil flow rate two to ten times over the classical approach. Additional horizontal injectors, perpendicular to the injector and the producer in classical VAPEX were placed in the top-most region of the reservoir in the new well pattern. The paper described the model development which involved conducting a series of simulation runs in order to evaluate the performance of the new well pattern. The paper also presented a comparison of the performance of the tee-SVX and the classical VAPEX and lateral-SVX. A sensitivity analysis was also performed to further evaluate the performance of tee-SVX and provide the boundaries of the application of the process. Two types of factors affecting the performance of tee-SVX were outlined, notably design factors; and formation and fluid uncertainties. The performance of tee-SVX in thinner reservoirs and in reservoirs with a gas cap were also examined. It was concluded that compared with the lateral-SVX process, the tee-SVX process could significantly reduce the time to solvent breakthrough. 12 refs., 2 tabs., 30 figs.

Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-B: Resource description, program history, wells tested, university and company based research, site restoration

Energy Technology Data Exchange (ETDEWEB)

John, C.J.; Maciasz, G.; Harder, B.J.

1998-06-01

The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Design well program; LaFourche Crossing; MG-T/DOE Amoco Fee No. 1 (Sweet Lake); Environmental monitoring at Sweet Lake; Air quality; Water quality; Microseismic monitoring; Subsidence; Dow/DOE L.R. Sweezy No. 1 well; Reservoir testing; Environmental monitoring at Parcperdue; Air monitoring; Water runoff; Groundwater; Microseismic events; Subsidence; Environmental consideration at site; Gladys McCall No. 1 well; Test results of Gladys McCall; Hydrocarbons in production gas and brine; Environmental monitoring at the Gladys McCall site; Pleasant Bayou No. 2 well; Pleasant Bayou hybrid power system; Environmental monitoring at Pleasant Bayou; and Plug abandonment and well site restoration of three geopressured-geothermal test sites. 197 figs., 64 tabs.

Monitoring ground-surface heating during expansion of the Casa Diablo production well field at Mammoth Lakes, California

Science.gov (United States)

Bergfeld, D.; Vaughan, R. Greg; Evans, William C.; Olsen, Eric

2015-01-01

The Long Valley hydrothermal system supports geothermal power production from 3 binary plants (Casa Diablo) near the town of Mammoth Lakes, California. Development and growth of thermal ground at sites west of Casa Diablo have created concerns over planned expansion of a new well field and the associated increases in geothermal fluid production. To ensure that all areas of ground heating are identified prior to new geothermal development, we obtained high-resolution aerial thermal infrared imagery across the region. The imagery covers the existing and proposed well fields and part of the town of Mammoth Lakes. Imagery results from a predawn flight on Oct. 9, 2014 readily identified the Shady Rest thermal area (SRST), one of two large areas of ground heating west of Casa Diablo, as well as other known thermal areas smaller in size. Maximum surface temperatures at 3 thermal areas were 26–28 °C. Numerous small areas with ground temperatures >16 °C were also identified and slated for field investigations in summer 2015. Some thermal anomalies in the town of Mammoth Lakes clearly reflect human activity.Previously established projects to monitor impacts from geothermal power production include yearly surveys of soil temperatures and diffuse CO2 emissions at SRST, and less regular surveys to collect samples from fumaroles and gas vents across the region. Soil temperatures at 20 cm depth at SRST are well correlated with diffuse CO2 flux, and both parameters show little variation during the 2011–14 field surveys. Maximum temperatures were between 55–67 °C and associated CO2 discharge was around 12–18 tonnes per day. The carbon isotope composition of CO2 is fairly uniform across the area ranging between –3.7 to –4.4 ‰. The gas composition of the Shady Rest fumarole however has varied with time, and H2S concentrations in the gas have been increasing since 2009.

Sleeving-back of horizontal wells to control downstream oil saturation and improve oil recovery

Energy Technology Data Exchange (ETDEWEB)

Greaves, M.; Saghr, A. M. [Bath Univ (United Kingdom)

1998-12-31

Air injection has become popular as an enhanced recovery technology, applicable over a wide variety of reservoir conditions including heavy, medium and light oils. One problem observed in light oil reservoirs is the tendency to desaturate the oil layer downstream of the moving front. This is particularly common in the case of thermal recovery processes. In this experiment designed to study ways to restrict the de-saturation of the oil layer, a modified horizontal producer well, incorporating a `sleeve-back` principal was used. The objective was to replicate the `toe-to-heel` displacement process occurring during heavy oil recovery, wherein downstream oil is essentially immobile due to its high viscosity. The `sleeve-back` of the well was achieved using a co-aligned, two-well assembly, so that the upstream section of the horizontal producer well was active, and continuously adjusted during propagation of the combustion front. The use of this continuous `sleeve-back` operation to control the level of de-saturation in the downstream section of a sand pack was successful as confirmed by the very high oil recovery achieved, equivalent to 93.5 per cent of oil in place. The level of CO{sub 2} production was also very high. The `sleeve-back` of the horizontal producer well made the light oil in-situ combustion more efficient compared to what would be expected in a fully-open well. The `sleeve-back` of the well also produced thermal contours in the sand pack that closely resembled those observed with heavy, highly viscous oil. By sealing-off the otherwise open well in the downstream part of the reservoir, the de-saturation of the oil layer was prevented. 9 refs., 4 tabs., 9 figs.

Real time, real fast : drilling horizontal wells in a heavy oil environment

Energy Technology Data Exchange (ETDEWEB)

Balke, S.C.; Rosauer, M.S. [Petrolera Ameriven/Phillips Petroleum, Caracas, (Venezuela)

2002-07-01

Eastern Venezuela's Orinoco Tar Belt or the Faja Petrolifera del Orinoco is one of the largest heavy oil fields in the world, containing more than 1.2 trillion barrels of heavy and extra heavy oil with API gravity of 10 to 6. The field is 320 miles long by 40 miles wide and is divided into the Machete, Zuata, Hamaca and Cerro Negro. It has been under production since the 1970s by Venezuela's national oil company, Petroleos de Venezuela SA. The region is only marginally cost effective because of the high costs associated with development. It is expected that the Hamaca Project, which is centrally located in the Orinoco Tar Belt can be effectively and economically developed by applying the latest technology and innovative techniques. Petrolera Ameriven has committed to develop the 250 square mile Hamaca area. The objective is to produce 165,000 acres at rate of 190,000 BOPD for the life of the project. The challenge is that when the oil is cooled and degasified it looks more like a tar or asphalt for paving roads. In addition, the major reservoirs within the field were deposited in low stand and transgressive system tracks consisting of meandering fluvial to fluvial-tidal deltaic deposits. Methods such as logging while drilling (LWD), satellite links and continuous updating and real-time visualization were applied to assess and mitigate risks. These methods made it possible to accurately place the shoe of the build sections for control of well directions. The methods also made it possible to identify sand/shale interfaces, determine the redirection of the drill bit, locate non-pay zones and help plan well paths to optimize production. The technologies developed were also effective in minimizing development costs, thereby improving the financial viability of the project. 1 ref., 16 figs.

Size-dependent electronic eigenstates of multilayer organic quantum wells

International Nuclear Information System (INIS)

Nguyen Ba An; Hanamura, E.

1995-09-01

A detailed theoretical treatment is given eigenfunctions and eigenenergies of a multilayer organic quantum well sandwiched between two different dielectric media. The abrupt change of dielectric constants at the interfaces distorts the wave function and results in possible surface states in addition to propagating states. The proper boundary conditions are accounted for by the method of image charges. Analytic criteria for existence of surface states are established using the nearest layers approximation, which depend not only on the intralayer parameters but also on the number of layers. The size dependence together with the dependence on signs and relative magnitudes of the structure parameters fully determine the energy spectrum of propagating states as well as the number and the location of surface states. (author). 28 refs, 10 figs, 2 tabs

Radioisotope techniques in oil wells

International Nuclear Information System (INIS)

Jain, Prabuddha

1998-01-01

Radioisotope techniques are quite useful in oil exploration and exploitation. Nuclear logging offers a way of gathering information on porosity, permeability, fluid saturations, hydrocarbon types and lithology. Some of the interesting applications in well drilling are determining depth of filtrate invasion, detection of lost circulation, drill-bit erosion control; primary cement measurements and well completions such as permanent tubular markers, perforation position marking, detection of channeling behind casing and gravel pack operations. Radioisotopes have been successfully used in optimizing production processes such as production profiling injection profiling, corrosion measurements and well to well tracer tests. (author)

Status of transuranium element production

International Nuclear Information System (INIS)

King, L.J.

1985-01-01

The Transuranium Processing Plant at Oak Ridge National Laboratory has been the production, storage, and distribution center for the heavy-element research program of the US Department of Energy since 1966. During the past four years, annual production rates of transcurium elements have been relatively stable, averaging 34 mg of 249 Bk, 369 mg of 252 Cf, 1.4 mg of 253 Es, and 0.7 pg of 257 Fm. The extensive provisions for changing and modifying equipment have allowed continual updating of the plant to include new concepts in chemical processes and equipment design. 21 refs., 4 figs., 2 tabs

Charm production asymmetries at the Fermilab experiments

International Nuclear Information System (INIS)

Carter, T.

1997-01-01

I present asymmetries between the production of charm particles and anti-particles from Fermilab experiments, E687, E769 and E791. The results are shown as a function of x F and p t 2 for D ± and D s ± mesons and for pion, kaon and photon beams and compared against current models. Results are also shown for a recent analysis of correlations between production of charm mesons and an associated pion. 14 refs., 5 figs., 3 tabs

MODELING OF FLOW AND TRANSPORT INDUCED BY PRODUCTION OF HYDROFRACTURE-STIMULATED GAS WELLS NEAR THE RULISON NUCLEAR TEST

Energy Technology Data Exchange (ETDEWEB)

Hodges, Rex A. [Navarro Research and Engineering; Cooper, Clay [Desert Research Inst. (DRI), Reno, NV (United States); Falta, Ronald [Clemson Univ., SC (United States)

2012-09-17

The Piceance Basin in western Colorado contains significant reserves of natural gas in poorly connected, low-permeability (tight) sandstone lenses of the Mesaverde Group. The ability to enhance the production of natural gas in this area has long been a goal of the oil and gas industry. The U.S. Atomic Energy Commission, a predecessor agency to the U.S. Department of Energy (DOE) and the U.S. Nuclear Regulatory Commission, participated in three tests using nuclear detonations to fracture tight formations in an effort to enhance gas production. The tests were conducted under Project Plowshare, a program designed to identify peaceful, beneficial uses for nuclear devices. The first, Project Gasbuggy, was conducted in 1967 in the San Juan Basin of New Mexico. The two subsequent tests, Project Rulison in 1969 and Project Rio Blanco in 1973, were in the Piceance Basin. The ability to enhance natural gas production from tight sands has become practical through advances in hydraulic fracturing technology (hydrofracturing). This technology has led to an increase in drilling activity near the Rulison site, raising concerns that contamination currently contained in the subsurface could be released through a gas well drilled too close to the site. As wells are drilled nearer the site, the DOE Office of Legacy Management has taken the approach outlined in the June 2010 Rulison Path Forward document (DOE 2010), which recommends a conservative, staged approach to gas development. Drillers are encouraged to drill wells in areas with a low likelihood of encountering contamination (both distance and direction from the detonation zone are factors) and to collect data from these wells prior to drilling nearer the site’s 40 acre institutional control boundary (Lot 11). Previous modeling results indicate that contamination has been contained within Lot 11 (Figure 1). The Path Forward document couples the model predictions with the monitoring of gas and produced water from the gas wells

Power and LPG production with LNG import

International Nuclear Information System (INIS)

Mak, J.Y.

2004-01-01

When used in power cogeneration, Liquefied Natural Gas (LNG) is both energy efficient and can eliminate seawater or fuel gas consumption as well as the associated environmental impacts of conventional regasification processes. However, some liquefied natural gas (LNG) sources have heating values higher than current North American natural gas pipelines can allow for. LNG from these cannot be injected into gas pipelines without several heating control processing steps. This paper outlines two new technologies developed to address this issue. The first is a power cogeneration process using LNG as a heat sink. The second technology involves a fractionation process removing Liquid Propane Gas (LPG) components from imported LNG, thereby controlling heat value. Both technologies are applicable in grassroots installations as well as being suitable for retrofitting to existing LNG regasification for power generation and LPG production. It was concluded that power cogeneration with a mixed fluid power cycle recovered a significant portion of energy in LNG liquefaction plants. Additionally, it was also possible to fractionate high quality LPG from LNG at a low cost, with the residue being further re-condensed and re-utilized for power generation. It was also concluded that the LNG fractionation process would add flexibility to the LNG receiving terminals, allowing the import of lower quality LNG to North America, while also generating additional revenues from LPG production. 3 refs., 5 tabs., 6 figs

Effects of structural characteristics on the productivity of shale gas wells: A case study on the Jiaoshiba Block in the Fuling shale gasfield, Sichuan Basin

Directory of Open Access Journals (Sweden)

Ming Hu

2018-03-01

Full Text Available For the sake of figuring out the influential mechanisms of structural characteristics on the productivity of shale gas wells, the structural characteristics of the Jiaoshiba Block in the Fuling shale gasfield, Sichuan Basin, were analyzed. Then, based on well test data of more than 190 horizontal wells, the effects of structures on shale gas well productivity were discussed systematically, and the main structural factors of different structural units in the Jiaoshiba Block that influence the productivity of shale gas wells were clarified. The following results were obtained. First, the structural units in the Jiaoshiba Block were obviously different in structural characteristics and their deformation strength is different. Second, the influence of structural characteristics on shale gas well productivity is directly manifested in gas-bearing property and fracturing effect. The stronger the structural deformation and the more developed the large faults and natural fractures, the more easily shale gas escapes and the poorer the gas bearing property will be, and vice versa. Third, The stronger the structural deformation, the more developed the fractures, the greater the burial depth and the higher the compressive stress of negative structures, the worse the fracturing effect will be, and vice versa. And fourth, Tectonics is the key factor controlling the difference of shale gas productivity between different structural units in the Jiaoshiba Block, but the main structural factors influencing the productivity are different in different structural units. Keywords: Sichuan Basin, Fuling shale gasfield, Jiaoshiba, Shale gas, Structural characteristics, Gas bearing property, Fracturing, Productivity

B production in hadron collisions: Theory

International Nuclear Information System (INIS)

Berger, E.L.

1989-01-01

A review is presented of heavy quark production in bar pp, π - p, and pp interactions at fixed target and collider energies. Calculations of total cross sections and of single quark inclusive differential cross sections d 2 σ/dk T dy are described including contributions through next-to-leading order in QCD perturbation theory. Comparisons with available data on charm and bottom quark production show good agreement for reasonable values of the charm and bottom quark masses and other parameters. Predictions and open issues in the interpretation of results are summarized. 20 refs., 5 figs

Environmental review of natural gas production in Lake Erie

International Nuclear Information System (INIS)

O'Shea, K.

2002-01-01

The water of Lake Erie is used as a source of drinking water for Ontario, New York, Pennsylvania, Ohio and Michigan. An environmental review has been conducted to determine the impact of drilling operations on the overall ecology of the lake. Since 1913, 2000 natural gas wells have been drilled in Lake Erie, of which 550 currently produce gas and account for 75 per cent of Ontario's total gas production. 180 wells are shut-in or suspended and the remaining wells have been abandoned. The gas wells are connected to onshore production facilities by approximately 1,600 km of small diameter pipelines that lie buried near shore or on top of the lake bed. Nearly 90 per cent of the in-lake infrastructure is in water depths of more than 20 metres. Talisman Energy is actively involved with the Canadian Coast Guard, the Department of Fisheries and Oceans, and the Ministry of Natural Resources to ensure cooperation between regulators and off-shore personnel. The environmental assessment of natural gas production in Lake Erie included a review of regulatory and best management practices, a biophysical overview of the lake, and a review of drilling practices, well completions, handling of waste streams, materials management, operations inspections, wastewater discharge, air emissions, and oil spills. It was revealed that for most drilling programs, cuttings are washed and discharged to the Lake. Ongoing testing will determine the impact that this practice has on benthic populations. The drill muds used for drilling operations are water based, environmentally friendly, and re-used between well locations. For completion programs, all well activities are closed circuit operations. Wells are abandoned through plugging with cement, removing wellheads and casing below the lake bottom. There has been a reported volume of about 23,000 litres of spilled product from 1990 to 2001, of which 68 per cent has come from 3 industrial companies that operate near Lake Erie. The offshore gas

On hadronic production of the Bc meson

International Nuclear Information System (INIS)

Chang Chaohsi; Chen Yuqi; Han Guoping; Jiang Hongtao

1994-08-01

Various approaches to the hadronic productions of the double heavy meson B c are investigated in this paper. The resultant cross sections obtained by the approaches are compared with in several aspects. One may see that the differences are quite substantial. The advantages and shortcomings of the approaches are discussed. (author). 17 refs, 4 figs

Production capability: ERDA methods and results

International Nuclear Information System (INIS)

Klemenic, J.

1977-01-01

Production centers are categorized into four classes, according to the relative certainty of future production. A ''forward cost'' basis is used to establish both the resource base and to define the acceptable production centers. The first phase of the work is called the ''Could'' capability. Resources are assigned to existing production centers, or new production centers are postulated based on adequate resources to support a mill for a reasonable economic life. A production schedule is developed for each center. The last step in the ''Could'' study is to aggregate the capital and operating costs. The final step in the Production Capability study is the rescheduling of the production from the ''Could'' to produce only sufficient U concentrate to meet the feed requirements of enrichment facilities operated at the announced transaction tails assay plans. The optimized production schedules are called the ''Need'' production capability. A separate study was also performed of industry production plans. 4 tables, 7 figs

Horizontal well impact on heavy oil supply

International Nuclear Information System (INIS)

Bowers, B.; Bielecki, J.; Hu, J.; Wall, B.; Drummond, K.

1993-01-01

Horizontal wells can take advantage of gravity drainage mechanisms, which can be important in conventional heavy oil and bitumen recovery. Horizontal drilling will impact on the development of established conventional heavy oil pools by infill drilling and application of enhanced recovery techniques. There will also be an impact on the development of extensions to established and newly discovered heavy oil pools, as well as a major impact on development of bitumen resources. To assess the impact of horizontal drilling on heavy oil supply, high-impact and low-impact scenarios were evaluated under specified oil-price assumptions for four heavy oil areas in Saskatchewan and Alberta. Horizontal well potential for infill drilling, waterflood projects, and thermal projects was assessed and estimates were made of such developments as reserves additions and heavy oil development wells under the two scenarios. In the low case, projected supply of conventional heavy oil and bitumen stabilizes at a level in the 90,000-94,000 m 3 /d after 1994. In the high case, overall supply continuously grows from 80,000 m 3 /d in 1992 to 140,000 m 3 /d in 2002. Through application of horizontal drilling, reserves additions in western Canada could be improved by ca 100 million m 3 by 2002. 14 figs., 6 tabs

Les séries figées dans Le traité de stylistique de Charles Bally (1865-1947

Directory of Open Access Journals (Sweden)

Brigitte Lépinette

2013-12-01

Full Text Available Cet article contextualise dans Le traité de stylistique ([Heidelberg, 1909 et 1921] 1951 de Charles Bally le traitement des séries figées, question qui, en particulier, après les recherches sur la combinatoire sémantico-lexicale d’Igor Mel’čuk et les travaux syntaxico-sémantiques, de base distributionaliste, de Maurice Gross spécialement, a donné lieu, de nos jours, à une littérature linguistique aussi bien quantitativement que qualitativement importante. Avant ces derniers auteurs, Bally a fait de ces séries phraséologiques un élément sur lequel portera son double objectif d’identification et de délimitation dans la langue des faits d’expression liés à l’affectivité (considérés par opposition aux faits d’expression qui le sont à la pensée. Dans le cadre des présupposés linguistiques particuliers de la stylistique de Bally, l’analyse des séries figées permettra à ce linguiste d’en reconnaître les principales caractéristiques (lexicales, sémantiques mais non syntaxiques. Cependant, –contrairement aux études récentes dans ce domaine, d’abord théoriques– elle sera mise au service d’un apprentissage du français s’appuyant sur ce que nous pouvons appeler un corpus (avant la lettre destiné à l’apprentissage d’une langue.

Origins of and countermeasures for the abnormal pressures in well production of the Ojarly gas field in the Right Bank of the Amu-Darya River, Turkmenistan

Directory of Open Access Journals (Sweden)

Peijun Zhang

2017-01-01

Full Text Available The Ojarly gas field, the major supplier of the Project Phase Ⅱ of the Right Bank of the Amu Darya River, is just small but valuable like a golden bean, although it has good reservoir properties and a high gas production capacity, the occurrence of continuous sharp decline of pressure in the well production shows a great difference from the previous well test program. In view of this, an integrated analysis method was established for the whole gas well production process to discover the three main reasons causing the abnormal well pressure. First, the formation energy and pressure dropped so fast that the wellhead pressure also fell over the period. Second, there was abnormal fluids pressure drop in the wellbore tube and throttling effect might occur in the production tube, so the pressure drop became abnormally increased. Third, due to the abnormally-increasing gas-yield pressure drop and unusually-decreasing gas productivity, the wellhead oil pressure dropped significantly. Also, through dynamic monitoring and in-depth analysis, it is also considered that due to the high density of drilling fluids and well-developed pores and caverns in the reservoirs, more and more barites separated from the fluids would be settled down covering the pay zones, so both the gas-generating capacity and production pressure significantly decreased. On this basis, some technical countermeasures were taken such as re-stimulation of reservoirs, removal of gas-producing channels, increase of seepage capacity, etc. In addition, by use of sand-flushing and acidizing, both the comprehensive skin factor and the production pressure drop were reduced to improve the well gas production capacity and maintain high productivity effectively. This study provides a technical support for long-term sustainable development and production of this gas field.

A method for limiting sand production in wells

Energy Technology Data Exchange (ETDEWEB)

Smith, L M

1983-09-01

A method is patented which makes it possible to substantially limit sand falling into a well of an operational stratum which is made up of weakly cemented rocks. The presently known methods for controlling sand carry away into a well in the majority of cases provide for the installation in its bottom hole of a special filter. The winding of a sand and gravel filter is the most common. Serious problems associated with the difficulty in testing the winding process must be dealt with in this, as well as the use of additional equipment. The patented method lies in installing a specially made pipe filter in the bottom hole. The filtering element is the walls of the filter itself, which are made of a porous material. An important characteristic of the filter is the size of its pores which causes the filtration purity. The size of the pipe filter may be from 10 to 200 meters depending on the exploitation conditions.

Study of gas production from shale reservoirs with multi-stage hydraulic fracturing horizontal well considering multiple transport mechanisms

Science.gov (United States)

Wei, Mingzhen; Liu, Hong

2018-01-01

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no systematical work has been conducted considering all reasonable transport mechanisms. And there are very few works on sensitivity studies of uncertain parameters using real parameter ranges. Hence, a detailed and systematic study of reservoir simulation with MsFHW is still necessary. In this paper, a dual porosity model was constructed to estimate the effect of parameters on shale gas production with MsFHW. The simulation model was verified with the available field data from the Barnett Shale. The following mechanisms have been considered in this model: viscous flow, slip flow, Knudsen diffusion, and gas desorption. Langmuir isotherm was used to simulate the gas desorption process. Sensitivity analysis on SGRs’ production performance with MsFHW has been conducted. Parameters influencing shale gas production were classified into two categories: reservoir parameters including matrix permeability, matrix porosity; and hydraulic fracture parameters including hydraulic fracture spacing, and fracture half-length. Typical ranges of matrix parameters have been reviewed. Sensitivity analysis have been conducted to analyze the effect of the above factors on the production performance of SGRs. Through comparison, it can be found that hydraulic fracture

Radioisotope tracer study in an aniline production reactor

International Nuclear Information System (INIS)

Pant, H.J.; Yelgoankar, V.N.; Mendhekar, G.N.

1995-01-01

A radioisotope tracer study was carried out in an aniline production reactor to investigate the cause of poor heat transfer from tube side to shell side in an aniline production (ANPO) reactor. The results of the study indicated that more than 50% of the shell volume was reduced due to deposition of the process material (i.e. fouling) on the shell walls and may be the cause of poor heat transfer in the reactor. (author). 2 refs., 2 figs

An evaluation of water production from the Gasbuggy reentry well

International Nuclear Information System (INIS)

Power, Dean V.; Bowman, Charles R.

1970-01-01

During the gas production testing of the Gasbuggy chimney, water production rates increased from an initial 4 to 5 barrels per 10 6 standard cubic feet of gas to 40 to 50 barrels per 10 6 standard cubic feet of gas. This unexpected occurrence hampered operations and increased waste disposal costs. A model is developed which calculates the amount of water produced from condensation of water vapor through the cooling and expansion of the gas in the production tubing. Results from this model are compared with the observed water production from November of 1968 through May of 1969. This comparison shows that up to seven times more water is being produced at high gas flow rates than can be explained by condensed vapor, indicating that water is being introduced into the production tubing in particulate or liquid form. A correlation of excess water with the pressure, temperature and gas flow velocity parameters is performed to determine the relationship between this excess water and these parameters. It is found that the excess produced water varied linearly with downhole pressure when a threshold gas flow velocity was exceeded. The relationship is expressed by the equation H 2 0 (in barrels per day) =126.5-0.1473 BHP (in pounds per square inch). The threshold gas velocity for excess water production was found to be about 6 feet per second in the 7 in casing or 40 feet per second in the 2 7/8 in tubing. An examination of the radioactivity of the gas and water produced from GB-E indicates that the tritiated water vapor in the chimney and tubing has been diluted by extraneous water. The tritium in the gas decreased as expected from about 10.9 μCi/SCF in November 1968 to 6.2 μCi/SCF in late February 1969. During this same period, the tritium in the water decreased from about 1.2 μCi/ml to 0.12 μCi/ml. Examination of water chemistry, preshot and during the production testing, indicates that at early times when there was no excess water, the produced water was distilled

Application of microbial photosynthesis to energy production and CO2 fixation

International Nuclear Information System (INIS)

Asada, Y.; Miyake, J.

1994-01-01

This paper presents different applications of microbial photosynthesis for energy production and carbon dioxide fixation. The authors discuss about energetic aspects of photosynthesis and features of biological way for solar energy conversion. (TEC). 4 figs., 12 refs

Overview of the science activities for the 2002 Mallik gas hydrate production research well program, Mackenzie Delta, N.W.T., Canada

Science.gov (United States)

Dallimore, S. R.; Collett, T. S.; Uchida, T.; Weber, M.

2003-04-01

With the completion of scientific studies undertaken as part of the 1998 Mallik 2L-38 gas hydrate research well, an international research site was established for the study of Arctic natural gas hydrates in the Mackenzie Delta of northwestern Canada. Quantitative well log analysis and core studies reveal multiple gas hydrate layers from 890 m to 1106 m depth, exceeding 110 m in total thickness. High gas hydrate saturation values, which in some cases exceed 80% of the pore volume, establish the Mallik gas hydrate field as one of the most concentrated gas hydrate reservoirs in the world. Beginning in December 2001 and continuing to the middle of March 2002, two 1188 m deep science observation wells were drilled and instrumented and a 1166 m deep production research well program was carried out. The program participants include 8 partners; The Geological Survey of Canada (GSC), The Japan National Oil Corporation (JNOC), GeoForschungsZentrum Potsdam (GFZ), United States Geological Survey (USGS), United States Department of the Energy (USDOE), India Ministry of Petroleum and Natural Gas (MOPNG)/Gas Authority of India (GAIL) and the Chevron-BP-Burlington joint venture group. In addition the project has been accepted as part of the International Scientific Continental Drilling Program. The Geological Survey of Canada is coordinating the science program for the project and JAPEX Canada Ltd. acted as the designated operator for the fieldwork. Primary objectives of the research program are to advance fundamental geological, geophysical and geochemical studies of the Mallik gas hydrate field and to undertake advanced production testing of a concentrated gas hydrate reservoir. Full-scale field experiments in the production well monitored the physical behavior of the hydrate deposits in response to depressurization and thermal stimulation. The observation wells facilitated cross-hole tomography and vertical seismic profile experiments (before and after production) as well as

Future carbon storage in harvested wood products from Ontario's Crown forests

International Nuclear Information System (INIS)

Chen, J.; Colombo, S.J.; Ter-Mikaelian, M.T.

2008-01-01

Carbon (C) storage in harvested wood products (HWP) from Ontario's Crown forests were analyzed using a large-scale forest C budget model. The model was used to estimate HWP C stock changes as defined by the Intergovernmental Panel on Climate Change. The harvested C mass was then allocated to 4 HWP end-use categories, notably (1) in use; (2) landfill; (3) energy; and (4) emissions. C mass redistribution among HWP end-use categories was calculated using an age-based C distribution matrix. Emissions for harvest, transport, and manufacturing were accounted for as well as emission reductions gained by using the HWP in place of other construction materials and fossil fuels. Results of the study showed that C storage in HWP is projected to increase by 3.6 Mt per year. The projections indicated that the harvest of wood products in Ontario will result in a steadily increasing C sink in HWP and forests. 51 refs., 8 tabs., 4 figs

Systemic representation of a production system: the Sagace method

International Nuclear Information System (INIS)

Benkhannouche, S.; Penalva, J.M.

1993-01-01

The systemic approach used in this study is devoted at a high level radioactive waste vitrification pilot. The Sagace method permits to realize a global view of this pilot plant taking in account the process, the production subsystems and the control process subsystems. 4 figs., 4 refs

Productivity variations, oxygen minimum zone and their impact on organic enrichment in the sediments

Digital Repository Service at National Institute of Oceanography (India)

Paropkari, A.L.

of Somalia, the Arabian Peninsula, Iran, Pakistan and Eastern and Western shelves of India (except a part of inner shelf), irrespective of primary productivity variation (Fig. 3), is mainly ascribed to decomposition of organic matter in contact.... Nevertheless, moderate to very high concentrations of organic carbon (Fig. 1) are invariably associated with the entire slope sediments, forming a long and wide band in contact with oxygen minima from Saurashtra to the southern tip of India. It may...

Pair production at GeV/u energies

International Nuclear Information System (INIS)

Bottcher, C.; Strayer, M.R.

1985-01-01

Electron and positron production in relativistic ion-atom collisions is discussed within the context of the time-dependent Dirac-Hartree approximation to a fully relativistic field theory of the collision. The time-dependent fields are treated classically, and the numerical methods employing basis splines are discussed in detail and contrasted with results obtained from the case of non-relativistic velocities. The results of a one-dimensional model are presented and show a moderately large probability for pair production followed by electron capture. 8 refs., 16 figs

Well logging, atom and geology

International Nuclear Information System (INIS)

Serra, O.

1994-01-01

Well logging techniques exploit interactions of gamma photons and neutrons with atoms. Interactions of neutrons of different energies with atoms allow the detection and evaluation of the weight percentage of several elements composing the rocks (C, O, Si, Ca, Fe, S); spectrometry of gamma rays produced by thermal neutron absorption allows for the weight percentage determination of Si, Ca, Fe, S, Cl, H, Ti and Gd, etc. High resolution detectors (germanium doped by Li, at liquid nitrogen temperature) allow the recognition of more elements. Other techniques involving neutrons consist in determining the population in epithermal neutrons at a certain distance of the neutron source (measurement of the hydrogen index). By analyzing the intensity of the gamma flux produced by Compton scattering, the electronic and bulk densities of the rocks are measured. All these data lead to the detection and evaluation of ore deposits (uranium and potassium) and coal, and determination of the lithology, the main minerals composing the rocks, petrophysical properties... 1 fig

Well plugging and abandonment plan for Waste Area Grouping 6 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Stansfield, R.G.; Huff, D.D.

1992-06-01

Site environmental characterization and remediation require data obtained from the installation and sampling of wells. When these wells are no longer needed or not producing reliable information, or are damaged and can act as conduits for contaminant migration, they should be identified and properly decommissioned. This is most important for wells of sufficient depth to create the potential for exchange of fluids between different hydrologic units. This plan presents the strategy and detailed approach for well plugging and abandonment (P ampersand A) at Waste Area Grouping 6 (WAG 6). An inventory of 768 wells, the total number known to have been installed in WAG 6 based on a combined review of data and direct field inventory, is provided in Appendix A. All wells that are no required for closure or postclosure surveillance of WAG 6 will be decommissioned. A listing of 69 existing WAG 6 wells that will be maintained for postclosure surveillance is provided in Appendix B, and their locations are shown in Fig. 1. Appendix C contains a list of all WAG 6 wells that will be decommissioned, although some may no longer exist. Their locations are shown in Fig. 2. It is likely that some new wells will be drilled as part of postclosure monitoring of Solid Waste Area 6 (SWSA), but they are beyond the scope of this report. It is intended that this plan provide a basis for developing contracts for cost and schedule determinations for the P ampersand A process

Hadron production in nuclear collisions from the NA49 experiment at 158GeV/c · A

International Nuclear Information System (INIS)

Sikler, F.; Baechler, J.; Barna, D.; Barnby, L.S.; Bartke, J.; Barton, R.A.; Betev, L.; Bialkowska, H.; Billmeier, A.; Blume, C.; Blyth, C.O.; Boimska, B.; Bracinik, J.; Brady, F.P.; Brun, R.; Buncic, P.; Carr, L.; Cebra, D.; Cooper, G.E.; Cramer, J.G.; Csato, P.; Eckardt, V.; Eckhardt, F.; Ferenc, D.; Fischer, H.G.; Fodor, Z.; Foka, P.; Freund, P.; Friese, V.; Ftacnik, J.; Gal, J.; Ganz, R.; Gazdzicki, M.; Gladysz, E.; Grebieszkow, J.; Harris, J.W.; Hegyi, S.; Hlinka, V.; Hoehne, C.; Igo, G.; Ivanov, M.; Jacobs, P.; Janik, R.; Jones, P.G.; Kadija, K.; Kolesnikov, V.I.; Kowalski, M.; Lasiuk, B.; Lednicky, R.; Levai, P.; Malakhov, A.I.; Margetis, S.; Markert, C.; Mayes, B.W.; Melkumov, G.L.; Molnar, J.; Nelson, J.M.; Odyniec, G.; Oldenburg, M.D.; Palla, G.; Panagiotou, A.D.; Petridis, A.; Pikna, M.; Pinsky, L.; Poskanzer, A.M.; Prindle, D.J.; Puehlhofer, F.; Reid, J.G.; Renfordt, R.; Retyk, W.; Ritter, H.G.; Roehrich, D.; Roland, C.; Roland, G.; Rybicki, A.; Sammer, T.; Sandoval, A.; Sann, H.; Semenov, A.Yu.; Schaefer, E.; Schmitz, N.; Seyboth, P.; Sitar, B.; Skrzypczak, E.; Snellings, R.; Squier, G.T.A.; Stock, R.; Strmen, P.; Stroebele, H.; Susa, T.; Szarka, I.; Szentpetery, I.; Sziklai, J.; Toy, M.; Trainor, T.A.; Trentalange, S.; Ullrich, T.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Voloshin, S.; Vranic, D.; Wang, F.; Weerasundara, D.D.; Wenig, S.; Whitten, C.; Xu, N.; Yates, T.A.; Yoo, I.K.; Zimanyi, J.

1999-01-01

With its large acceptance and particle identification coverage the NA49 experiment (Fig. 1) can study hadron production in a wide range of high energy reactions [1]. Originally aimed at examining central Pb+Pb collisions for signatures of quark-gluon plasma formation, the scope of the experiment has been enhanced with a systematic study of impact parameter and projectile size dependence, as well as the inclusion of the more elementary p+p and p+A interactions. The question is: are predicted signals of the quark-gluon plasma observed and are there discontinuities which would support the concept of hadronic phase transition?

Production of bioethanol from corn meal hydrolyzates

Energy Technology Data Exchange (ETDEWEB)

Ljiljana Mojovic; Svetlana Nikolic; Marica Rakin; Maja Vukasinovic [University of Belgrade, Belgrade (Serbia and Montenegro). Faculty of Technology and Metallurgy, Department of Biochemical Engineering and Biotechnology

2006-09-15

The two-step enzymatic hydrolysis of corn meal by commercially available {alpha}-amylase and glucoamylase and further ethanol fermentation of the obtained hydrolyzates by Saccharomyces cerevisiae yeast was studied. The conditions of starch hydrolysis such as substrate and enzyme concentration and the time required for enzymatic action were optimized taking into account both the effects of hydrolysis and ethanol fermentation. The corn meal hydrolyzates obtained were good substrates for ethanol fermentation by S. cerevisiae. The yield of ethanol of more than 80% (w/w) of the theoretical was achieved with a satisfactory volumetric productivity P (g/l h). No shortage of fermentable sugars was observed during simultaneous hydrolysis and fermentation. In this process, the savings in energy by carrying out the saccharification step at lower temperature (32{sup o}C) could be realized, as well as a reduction of the process time for 4 h. 31 refs., 5 figs., 2 tabs.

Temperature and Pressure Effects on Drilling Fluid Rheology and ECD in Very Deep Wells

Energy Technology Data Exchange (ETDEWEB)

Rommetveit, R.; Bjoerkvoll, K.S.

1997-12-31

The rheological properties of drilling fluids are usually approximated to be independent of pressure and temperature. In many cases this is a good approximation. However, for wells with small margins between pore and fracture pressure, careful evaluations and analysis of the effects of temperature and pressure on well bore hydraulics and kick probability are needed. In this publication the effects of pressure and temperature are discussed and described for typical HPHT (High Pressure High Temperature) wells. Laboratory measurements show that rheology is very pressure and temperature dependent. The practical implications of these observations are illustrated through a series of calculations with an advanced pressure and temperature simulator. 10 refs., 15 figs.

Proposal to represent neutron absorption by fission products by a single pseudo-fragment

International Nuclear Information System (INIS)

Tsibulya, A.M.; Kochetkov, A.L.; Kravchenko, I.V.; Nikolaev, M.N.

1991-01-01

The concentration of fission products during reactor operation is analyzed. The dependence of a composite fission product capture cross-section as a function of time and on the nature of the A of the fissile nuclide are investigated, and the neutron radiative capture in fission products of a thermal reactor is evaluated. It is concluded that neutron absorption by fission products can be described by pseudo-fragments. (author). 18 refs, 2 figs, 3 tabs

Pion production cross sections and associated parameters

International Nuclear Information System (INIS)

Bradbury, J.N.

1985-01-01

Negative pions have been used for radiotherapy at the meson factories LAMPF (USA), SIN (Switzerland), and TRIUMF (Canada) and have been planned for use at new meson facilities under construction (USSR) and at proposed dedicated medical facilities. Providing therapeutically useful dose rates of pions requires a knowledge of the pion production cross sections as a function of primary proton energy (500 to 1000 MeV), pion energy (less than or equal to100 MeV), production angle, and target material. The current status of the data base in this area is presented including theoretical guidelines for extrapolation purposes. The target material and geometry, as well as the proton and pion beam parameters, will affect the electron (and muon) contamination in the beam which may have an important effect on both the LET characteristics of the dose and the dose distribution. In addition to cross-section data, channel characteristics such as length of pion trajectory, solid-angle acceptance, and momentum analysis will affect dose rate, distribution, and quality. Such considerations are briefly addressed in terms of existing facilities and proposed systems. 16 refs., 6 figs

QCD in heavy quark production and decay

Energy Technology Data Exchange (ETDEWEB)

Wiss, J. [Univ. of Illinois, Urbana, IL (United States)

1997-06-01

The author discusses how QCD is used to understand the physics of heavy quark production and decay dynamics. His discussion of production dynamics primarily concentrates on charm photoproduction data which are compared to perturbative QCD calculations which incorporate fragmentation effects. He begins his discussion of heavy quark decay by reviewing data on charm and beauty lifetimes. Present data on fully leptonic and semileptonic charm decay are then reviewed. Measurements of the hadronic weak current form factors are compared to the nonperturbative QCD-based predictions of Lattice Gauge Theories. He next discusses polarization phenomena present in charmed baryon decay. Heavy Quark Effective Theory predicts that the daughter baryon will recoil from the charmed parent with nearly 100% left-handed polarization, which is in excellent agreement with present data. He concludes by discussing nonleptonic charm decay which is traditionally analyzed in a factorization framework applicable to two-body and quasi-two-body nonleptonic decays. This discussion emphasizes the important role of final state interactions in influencing both the observed decay width of various two-body final states as well as modifying the interference between interfering resonance channels which contribute to specific multibody decays. 50 refs., 77 figs.

QCD in heavy quark production and decay

International Nuclear Information System (INIS)

Wiss, J.

1997-01-01

The author discusses how QCD is used to understand the physics of heavy quark production and decay dynamics. His discussion of production dynamics primarily concentrates on charm photoproduction data which are compared to perturbative QCD calculations which incorporate fragmentation effects. He begins his discussion of heavy quark decay by reviewing data on charm and beauty lifetimes. Present data on fully leptonic and semileptonic charm decay are then reviewed. Measurements of the hadronic weak current form factors are compared to the nonperturbative QCD-based predictions of Lattice Gauge Theories. He next discusses polarization phenomena present in charmed baryon decay. Heavy Quark Effective Theory predicts that the daughter baryon will recoil from the charmed parent with nearly 100% left-handed polarization, which is in excellent agreement with present data. He concludes by discussing nonleptonic charm decay which is traditionally analyzed in a factorization framework applicable to two-body and quasi-two-body nonleptonic decays. This discussion emphasizes the important role of final state interactions in influencing both the observed decay width of various two-body final states as well as modifying the interference between interfering resonance channels which contribute to specific multibody decays. 50 refs., 77 figs

Dosimetric measurement of the disintegration rate of fission products

International Nuclear Information System (INIS)

Solymosi, J.; Nagy, L.G.; Zagyvai, P.

1992-01-01

Investigations on the disintegration rate of fission products of 238 U and 239 Pu are presented. The intensity of the β-and γ-radiation of fission products were measured continously in an interval of 1-1300 hours following the fission, offering the possibility for determining the general and specific characteristics of the individual fission products. A universal measuring procedure was elaborated for the rapid in situ determination of the dosimetric features of fission products, which is suitable for the accurate evaluation and prediction of external absorbed dose even in case of fission products of various origin and unknown composition. (author) 6 refs.; 7 figs.; 1 tab

New method of analyzing well tests in fractured wells using sandface pressure and rate data

Energy Technology Data Exchange (ETDEWEB)

Osman, M.; Almehaideb, R.; Abou-Kassem, J. [U.A.E. University, Al-Ain (United Arab Emirates)

1998-05-01

Analysis of variable flow rate tests has been of special interest recently because in many cases it is impractical to keep a flow rate constant long enough to perform a drawdown test. Further, in many other drawdown and buildup tests, the early data were influenced by wellbore storage effects, and the duration of these effects could be quite long for low-permeability reservoirs. This paper presents a mathematical model which describes drawdown and buildup tests in hydraulically fractured wells. This new method uses a specialized plot approach to analyze the linear flow data and combines it with the superposition of constant-rate solution method for the analysis of psuedoradial flow data. It does not require prior knowledge of the fracture type (uniform-flux or infinite-conductivity); in fact it predicts the fracture type. This method is useful for the analysis of simultaneously measured downhole pressure and sandface rate data. 12 refs., 11 figs., 3 tabs.

How wireless remote technology reduces cost, boosts productivity and improves safety in upstream oil and gas operations

Energy Technology Data Exchange (ETDEWEB)

Wommack, K. [Viatran, Edmonton, AB (Canada)

2009-09-15

This article demonstrated how wireless communications can help oil and gas producers obtain the most current information on the status of their operations to help optimize operations and protect workers and equipment. Wireless communication can provide benefits at nearly every phase of upstream production. When combined with pressure, temperature, flow, level and other sensing devices, wireless communications provide an effective and economical way to deliver data on well or pipeline operations to site managers; optimize well-production, minimize workovers and prevent blowdowns at the wellhead; track oil and water production; measure differential pressure, line pressure and line temperature; and monitor the motorized choke and control valve position. Wireless technology offers significant savings through improved maintenance efficiency. With wireless systems in remote locations, there are seldom problems in the transmission path. Wireless technology makes it much easier and affordable to manage well operations from a safe distance. By eliminating the need for wires in a fracing operation, wireless can help fracing companies maintain a safe operating distance from their target wells, and move operations from well to well with ease. A wireless communication system for transmitting process data from field sensors to a field processing device consists of radio transmitters, a communications gateway and a user interface. The communications hub receives encrypted messages from the remote devices and transmits them to a flow computer, SCADA system, or Distributed Control System. Data is then transmitted to a central office. 1 fig.