WorldWideScience

Sample records for production traits electronic

  1. Selection for production and reproduction traits in pigs

    NARCIS (Netherlands)

    Vries, de A.G.

    1989-01-01

    Introduction

    Reproduction traits are important for piglet production, whereas production traits are important for fattening. Pig breeding organizations improve both groups of traits by selection in nucleus populations. Optimization of selection in these nucleus populations

  2. Root traits contributing to plant productivity under drought

    Directory of Open Access Journals (Sweden)

    Louise eComas

    2013-11-01

    Full Text Available Geneticists and breeders are positioned to breed plants with root traits that improve productivity under drought. However, a better understanding of root functional traits and how traits are related to whole plant strategies to increase crop productivity under different drought conditions is needed. Root traits associated with maintaining plant productivity under drought include small fine root diameters, long specific root length (SRL, and considerable root length density, especially at depths in soil with available water. In environments with late season water deficits, small xylem diameters in targeted seminal roots save soil water deep in the soil profile for use during crop maturation and result in improved yields. Capacity for deep root growth and large xylem diameters in deep roots may also improve root acquisition of water when ample water at depth is available. Xylem pit anatomy that makes xylem less ‘leaky’ and prone to cavitation warrants further exploration holding promise that such traits may improve plant productivity in water-limited environments without negatively impacting yield under adequate water conditions. Rapid resumption of root growth following soil rewetting may improve plant productivity under episodic drought. Genetic control of many of these traits through breeding appears feasible. Several recent reviews have covered methods for screening root traits but an appreciation for the complexity of root systems (e.g. functional differences between fine and coarse roots needs to be paired with these methods to successfully identify relevant traits for crop improvement. Screening of root traits at early stages in plant development can proxy traits at mature stages but verification is needed on a case by case basis that traits are linked to increased crop productivity under drought. Examples in lesquerella (Physaria and rice (Oryza show approaches to phenotyping of root traits and current understanding of root trait

  3. Correlation analysis of milk production traits across three ...

    African Journals Online (AJOL)

    The relationship between milk production traits over whole lactations was evaluated across three generations of Simmental cows (between daughters, dams and granddams) by a corelation analysis with whole lactation traits in the daughter generation being used as the dependent variables (x1), and those in ...

  4. Behaviour and production traits correlation of five breeds of sheep

    Directory of Open Access Journals (Sweden)

    Eko Handiwirawan

    2012-10-01

    Full Text Available Information about correlations among behavioral traits and production traits may facilitate using easily measured traits to be used as alternative criteria for indirect selection to improve other traits in sheep. The purpose of this study was to estimate correlations among behavioral and production traits of five breeds of sheep. A total of 128 head of weaned lambs and 168 ewes with nursing lambs of five breeds were used in this study, i.e. Barbados Black Belly Cross (BC, Composite Garut (KG, Local Garut (LG, Composite Sumatra (KS and St. Croix Cross (SC. Temperament was assessed in a test arena, for subsequent association with growth rate and ewe productivity. Analysis of variance of production and behavioral traits among breeds was carried out using PROC GLM of SAS software Ver. 9.0. PROCCORR was used to estimate correlations among production and behavioral variables. Weaned lambs that were more docile towards the observer had higher daily gains. Ewes that bleated more frequently when separated from their lamb had higher lamb weaning weights and lamb survival than ewes bleating fewer times under the same conditions. In BC ewes, a positive correlation was observed between frequency of bleats and lamb survival.

  5. Quantitative trait loci linked to PRNP gene controlling health and production traits in INRA 401 sheep

    Directory of Open Access Journals (Sweden)

    Brunel Jean-Claude

    2007-07-01

    Full Text Available Abstract In this study, the potential association of PrP genotypes with health and productive traits was investigated. Data were recorded on animals of the INRA 401 breed from the Bourges-La Sapinière INRA experimental farm. The population consisted of 30 rams and 852 ewes, which produced 1310 lambs. The animals were categorized into three PrP genotype classes: ARR homozygous, ARR heterozygous, and animals without any ARR allele. Two analyses differing in the approach considered were carried out. Firstly, the potential association of the PrP genotype with disease (Salmonella resistance and production (wool and carcass traits was studied. The data used included 1042, 1043 and 1013 genotyped animals for the Salmonella resistance, wool and carcass traits, respectively. The different traits were analyzed using an animal model, where the PrP genotype effect was included as a fixed effect. Association analyses do not indicate any evidence of an effect of PrP genotypes on traits studied in this breed. Secondly, a quantitative trait loci (QTL detection approach using the PRNP gene as a marker was applied on ovine chromosome 13. Interval mapping was used. Evidence for one QTL affecting mean fiber diameter was found at 25 cM from the PRNP gene. However, a linkage between PRNP and this QTL does not imply unfavorable linkage disequilibrium for PRNP selection purposes.

  6. Economic values of pork production related traits in Finland

    Directory of Open Access Journals (Sweden)

    T. SERENIUS

    2008-12-01

    Full Text Available The objective of the present study was to estimate economic values for sow efficiency and meat production traits in the Finnish pork production system including the consideration for subsidies. Economic values were estimated by developing a bio-economic model that describes the Finnish production system. Genetic improvement estimates for meat production traits were also developed in order to evaluate how much genetic gain is reduced due to selection for meat quality. Results showed that the highest economic values, when expressed in genetic standard deviations, were obtained for total number of piglets born (€2.07 per piglet, feed conversion ratio (€2.07 per feed unit per kg, and lean meat percentage (€1.69 per %. Economic values for litter size, piglet mortality, sows length of productive life, and lean meat percentage increased when subsidies were not accounted for in the bio-economic model. Results show further that meat quality should have 15–20 percent weight in the Finnish production trait index in order to prevent its deterioration. When the selection weights are 15–20% for meat quality, the expected loss in genetic gain is approximately 3 percent for other production traits when compared to selection indices where meat quality traits are not included.;

  7. Radioisotope production with electron accelerators

    International Nuclear Information System (INIS)

    Brinkman, G.A.

    1978-01-01

    The production of radio isotopes with electron accelerators proceeds mainly by secondary photons (bremsstrahlung), produced in an interaction between the electrons and the Coulomb field of the nuclei of a converter. The production yields depend on: the initial electron energy, the Z and thickness of the bremsstrahlung-converter, the Z, A and the thickness of the target, the geometric set up and the cross section for a particular reaction. In this article the production is only considered for thin bremsstrahlung converters in combination with an electron 'sweep' magnet. Simple formulae are given for the calculations of production yields under standard conditions with only sigmasub(q) (the cross section per equivalent quantum) and f (the fraction of the photons that hit the target) as variables and for the calculations of the dose rate at the production point. The units in which the yields are expressed in the literature (units of sigmasub(q) dose, electron beam intensity, monitor response) are discussed. (Auth.)

  8. Associations between milk protein polymorphisms and milk production traits.

    NARCIS (Netherlands)

    Bovenhuis, H.; Arendonk, van J.A.M.; Korver, S.

    1992-01-01

    Associations between milk protein genotypes and milk production traits were estimated from 6803 first lactation records. Exact tests of associated hypotheses and unbiased estimates of genotype effects were from an animal model. Milk protein genotype effects were estimated using a model in which each

  9. Setting MEPS for electronic products

    International Nuclear Information System (INIS)

    Siderius, Hans-Paul

    2014-01-01

    When analysing price, performance and efficiency data for 15 consumer electronic and information and communication technology products, we found that in general price did not relate to the efficiency of the product. Prices of electronic products with comparable performance decreased over time. For products where the data allowed fitting the relationship, we found an exponential decrease in price with an average time constant of −0.30 [1/year], meaning that every year the product became 26% cheaper on average. The results imply that the classical approach of setting minimum efficiency performance standards (MEPS) by means of life cycle cost calculations cannot be applied to electronic products. Therefore, an alternative approach based on the improvement of efficiency over time and the variation in efficiency of products on the market, is presented. The concept of a policy action window can provide guidance for the decision on whether setting MEPS for a certain product is appropriate. If the (formal) procedure for setting MEPS takes longer than the policy action window, this means that the efficiency improvement will also be achieved without setting MEPS. We found short, i.e. less than three years, policy action windows for graphic cards, network attached storage products, network switches and televisions. - Highlights: • For electronic consumer products price does not relate to efficiency. • Average price decrease of selected electronic products is 26 % per year. • We give an alternative approach to life cycle cost calculations for setting MEPS. • The policy action window indicates whether setting MEPS is appropriate

  10. Improvement in genetic evaluation of female fertility in dairy cattle using multiple-trait models including milk production traits

    DEFF Research Database (Denmark)

    Sun, C; Madsen, P; Lund, M S

    2010-01-01

    This study investigated the improvement in genetic evaluation of fertility traits by using production traits as secondary traits (MILK = 305-d milk yield, FAT = 305-d fat yield, and PROT = 305-d protein yield). Data including 471,742 records from first lactations of Denmark Holstein cows, covering...... the years of inseminations during first lactations from 1995 to 2004, were analyzed. Six fertility traits (i.e., interval in days from calving to first insemination, calving interval, days open, interval in days from first to last insemination, numbers of inseminations per conception, and nonreturn rate...... stability and predictive ability than single-trait models for all the fertility traits, except for nonreturn rate within 56 d after first service. The stability and predictive ability for the model including MILK or PROT were similar to the model including all 3 milk production traits and better than...

  11. Path analysis of the productive traits in Sorghum species

    Directory of Open Access Journals (Sweden)

    Ikanović Jela

    2011-01-01

    Full Text Available This research studied the phenotypic correlation coefficients between three Sorghum species, namely forage sorghum S. bicolor Moench. (c. NS-Džin, Sudan grass S. sudanense L. (c. Zora and interspecies hybrid S. bicolor x S. sudanense (c. Siloking. The analyses were performed on plant material samples taken from the first cutting, when plants were in the beginning phase of tasseling. The following morphologic traits were studied: plant height, number of leaves per plant, stem leaf weight and mean stem weight. Additionally, their direct and indirect effect on dependent variable green biomass yield was analyzed, for which path coefficients were calculated. This method enables more quality and full insight into relations existing among the studied traits, more precise establishment of cause-effect connections among them, as well as to separate direct from indirect effects of any particular trait on dependent variable, being biomass yield in this case. The analysis of phenotypic coefficients revealed differences in direct and indirect effect of certain traits on dependent variable. Sudan grass had the highest stem (2.281 m and most leaves per plant (7.917. Forage sorghum had the largest leaf weight per plant (49.05 g, while interspecies hybrid had the highest mean stem weight (80.798 g. Variations of these morphologic traits among species were found to be significant and very significant. Morphologic traits - stem height and weight significantly affected sorghum green biomass yield. Leaf number and leaf portion in total biomass were negatively correlated with yield. Cultivars differed significantly regarding morphologic and productive traits. Sudan grass had the lowest green biomass yield, while forage sorghum and interspecies hybrid had significant yield increase.

  12. Mapping of quantitative trait loci (QTL) for production, resistance and tolerance traits in Salix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Roennberg-Waestljung, Ann Christin; Bertholdsson, Nils-Ove; Glynn, Carolyn; Weih, Martin; Aahman, Inger [SLU, Uppsala (Sweden). Dept. of Plant Biology and Forest Genetics

    2004-05-01

    Quantitative trait loci (QTL) for growth traits, water use efficiency and tolerance/resistance against metals and herbivores have been identified. A hybrid F2 population originating from a cross between a Salix dasyclados-clone (SW901290) and a S. viminalis-clone ('Jorunn') was used for the different studies in this project. The growth response was analyzed in a greenhouse experiment with two water treatments, normal and drought. In addition, three field experiments with contrasting soils and climates were established. QTL specific for each treatment or field environment but also QTL stable over the treatments or field environments were detected. Each QTL explained from 8 to 29 % of the phenotypic variation depending on trait, treatment or field environment. Clusters of QTL for different traits were mapped indicating a common genetic base or tightly-linked QTL. Stable QTL identified for dryweight can be useful tools for early selection in Salix. In a separate greenhouse experiment, with a subset of ten genotypes from the F2 population, we show that genotype is more important than irrigation treatment for production of phenolic substances as well as for resistance to herbivory by P vulgatissima.

  13. Carbon footprinting of electronic products

    International Nuclear Information System (INIS)

    Vasan, Arvind; Sood, Bhanu; Pecht, Michael

    2014-01-01

    Highlights: • Challenges in adopting existing CF standards for electronic products are discussed. • Carbon footprint of electronic products is underestimated using existing standards. • Multipronged approach is presented to overcome the identified challenges. • Multipronged approach demonstrated on commercial and military grade DC–DC converter system. - Abstract: In order to mitigate the effects of global warming, companies are being compelled by governments, investors, and customers to control their greenhouse gas (GHG) emissions. Similar to the European Union’s legislation on the airline industry, legislation is expected to require the electronics industry to assess their product’s carbon footprint before sale or use, as the electronics industry’s contribution to global GHG emissions is comparable to the airline industry’s contribution. Thus, it is necessary for members of the electronics industry to assess their current GHG emission rates and identify methods to reduce environmental impacts. Organizations use Carbon Footprint (CF) analysis methods to identify and quantify the GHG emissions associated with the life cycle stages of their product or services. This paper discusses the prevailing methods used by organizations to estimate the CF of their electronics products and identifies the challenges faced by the electronics industry when adopting these methods in an environment of decreasing product development cycles with complex and diffuse supply chains. We find that, as a result of the inconsistencies arising from the system boundary selection methods and databases, the use of outdated LCA approaches, and the lack of supplier’s emissions-related data, the CFs of electronic products are typically underestimated. To address these challenges, we present a comprehensive approach to the carbon footprinting of electronic products that involves the use of product-group-oriented standards, hybrid life cycle assessment techniques, and the

  14. Assessment of the Kid Production Traits of Kacang Goat Under Smallholders Production System

    OpenAIRE

    Sodiq, A; Priyono, A; Tawfik, ES

    2010-01-01

    The main objectives of this study were to assess the influence of environmental (non-genetic) factors on kid production traits of Kacang goat under smallholders production system. The study was conducted at the Kacang goat smallholders, located at the centre of Kacang goat in Gundi subdistric, Purwodadi regency, Central Java. The kid production traits evaluated are birth weight, weaning weight, and growth rate till weaning. The environmental factors assessed were: sex (male, female), type of ...

  15. Derivation of economic values for veal, beef and milk production traits using profit equations.

    NARCIS (Netherlands)

    Bekman, H.; Arendonk, van J.A.M.

    1993-01-01

    In this study profit equations for milk, veal and beef bull production were developed to obtain economic values for different traits. Veal and beef production were described in terms of fat and protein daily gain. For categorical traits, dystocia and carcass quality traits, economic values were

  16. Quantitative trait loci for milk production and functional traits in two Danish Cattle breeds

    DEFF Research Database (Denmark)

    Mai, M D; Rychtarova, J; Zink, V

    2010-01-01

    Quantitative trait loci (QTL) in Danish Jersey and Danish Red cattle were independently mapped by least squares regression analysis. For Jersey breed, five grandsire families were genotyped for 186 markers on 16 chromosomes (BTAs). Eight traits analysed were milk yield (MY), fat percentage (FP), ...

  17. Electronic Animal Drug Product Listing Directory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Electronic Animal Drug Product Listing Directory is a directory of all animal drug products that have been listed electronically since June 1, 2009, to comply...

  18. Economic values of production and functional traits, including residual feed intake, in Finnish milk production.

    Science.gov (United States)

    Hietala, P; Wolfová, M; Wolf, J; Kantanen, J; Juga, J

    2014-02-01

    Improving the feed efficiency of dairy cattle has a substantial effect on the economic efficiency and on the reduction of harmful environmental effects of dairy production through lower feeding costs and emissions from dairy farming. To assess the economic importance of feed efficiency in the breeding goal for dairy cattle, the economic values for the current breeding goal traits and the additional feed efficiency traits for Finnish Ayrshire cattle under production circumstances in 2011 were determined. The derivation of economic values was based on a bioeconomic model in which the profit of the production system was calculated, using the generated steady state herd structure. Considering beef production from dairy farms, 2 marketing strategies for surplus calves were investigated: (A) surplus calves were sold at a young age and (B) surplus calves were fattened on dairy farms. Both marketing strategies were unprofitable when subsidies were not included in the revenues. When subsidies were taken into account, a positive profitability was observed in both marketing strategies. The marginal economic values for residual feed intake (RFI) of breeding heifers and cows were -25.5 and -55.8 €/kg of dry matter per day per cow and year, respectively. The marginal economic value for RFI of animals in fattening was -29.5 €/kg of dry matter per day per cow and year. To compare the economic importance among traits, the standardized economic weight of each trait was calculated as the product of the marginal economic value and the genetic standard deviation; the standardized economic weight expressed as a percentage of the sum of all standardized economic weights was called relative economic weight. When not accounting for subsidies, the highest relative economic weight was found for 305-d milk yield (34% in strategy A and 29% in strategy B), which was followed by protein percentage (13% in strategy A and 11% in strategy B). The third most important traits were calving

  19. Associations between variants of the HAL gene and milk production traits in Chinese Holstein cows.

    Science.gov (United States)

    Wang, Haifei; Jiang, Li; Wang, Wenwen; Zhang, Shengli; Yin, Zongjun; Zhang, Qin; Liu, Jian-Feng

    2014-11-25

    The histidine ammonia-lyse gene (HAL) encodes the histidine ammonia-lyase, which catalyzes the first reaction of histidine catabolism. In our previous genome-wide association study in Chinese Holstein cows to identify genetic variants affecting milk production traits, a SNP (rs41647754) located 357 bp upstream of HAL, was found to be significantly associated with milk yield and milk protein yield. In addition, the HAL gene resides within the reported QTLs for milk production traits. The aims of this study were to identify genetic variants in HAL and to test the association between these variants and milk production traits. Fifteen SNPs were identified within the regions under study of the HAL gene, including three coding mutations, seven intronic mutations, one promoter region mutation, and four 3'UTR mutations. Nine of these identified SNPs were chosen for subsequent genotyping and association analyses. Our results showed that five SNP markers (ss974768522, ss974768525, ss974768531, ss974768533 and ss974768534) were significantly associated with one or more milk production traits. Haplotype analysis showed that two haplotype blocks were significantly associated with milk yield and milk protein yield, providing additional support for the association between HAL variants and milk production traits in dairy cows (P HAL gene and milk production traits in Chinese Holstein cows, indicating the potential role of HAL variants in these traits. These identified SNPs may serve as genetic markers used in genomic selection schemes to accelerate the genetic gains of milk production traits in dairy cattle.

  20. N2O production, a widespread trait in fungi

    Science.gov (United States)

    Maeda, Koki; Spor, Aymé; Edel-Hermann, Véronique; Heraud, Cécile; Breuil, Marie-Christine; Bizouard, Florian; Toyoda, Sakae; Yoshida, Naohiro; Steinberg, Christian; Philippot, Laurent

    2015-04-01

    N2O is a powerful greenhouse gas contributing both to global warming and ozone depletion. While fungi have been identified as a putative source of N2O, little is known about their production of this greenhouse gas. Here we investigated the N2O-producing ability of a collection of 207 fungal isolates. Seventy strains producing N2O in pure culture were identified. They were mostly species from the order Hypocreales order--particularly Fusarium oxysporum and Trichoderma spp.--and to a lesser extent species from the orders Eurotiales, Sordariales, and Chaetosphaeriales. The N2O 15N site preference (SP) values of the fungal strains ranged from 15.8‰ to 36.7‰, and we observed a significant taxa effect, with Penicillium strains displaying lower SP values than the other fungal genera. Inoculation of 15 N2O-producing strains into pre-sterilized arable, forest and grassland soils confirmed the ability of the strains to produce N2O in soil with a significant strain-by-soil effect. The copper-containing nitrite reductase gene (nirK) was amplified from 45 N2O-producing strains, and its genetic variability showed a strong congruence with the ITS phylogeny, indicating vertical inheritance of this trait. Taken together, this comprehensive set of findings should enhance our knowledge of fungi as a source of N2O in the environment.

  1. Overlapping chromosomal regions for fertility traits and production traits in the Danish Holstein population

    DEFF Research Database (Denmark)

    Höglund, Johanna Karolina; Buitenhuis, A J; Guldbrandtsen, B

    2009-01-01

    , it is of interest to validate which of the subtraits are affected by the QTL. Phenotypic and marker data were collected from 34 grandsire families from the Danish Holstein population. First, the trait data for "fertility treatments" were separated into their underlying subtraits: uterine infections, antibiotics...

  2. US-Total Electron Content Product (USTEC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The US Total Electron Content (US-TEC) product is designed to specify TEC over the Continental US (CONUS) in near real-time. The product uses a Kalman Filter data...

  3. Genetic correlations between methane production and fertility, health, and body type traits in Danish Holstein cows.

    Science.gov (United States)

    Zetouni, L; Kargo, M; Norberg, E; Lassen, J

    2018-03-01

    Our aim was to investigate the genetic correlations between CH 4 production and body conformation, fertility, and health traits in dairy cows. Data were collected from 10 commercial Holstein herds in Denmark, including 5,758 cows with records for body conformation traits, 7,390 for fertility traits, 7,439 for health traits, and 1,397 with individual CH 4 measurements. Methane production was measured during milking in automatic milking systems, using a sniffer approach. Correlations between CH 4 and several different traits were estimated. These traits were interval between calving and first insemination, interval between first and last insemination, number of inseminations, udder diseases, other diseases, height, body depth, chest width, dairy character, top line, and body condition score. Bivariate linear models were used to estimate the genetic parameters within and between CH 4 and the other traits. In general, the genetic correlations between CH 4 and the traits investigated were low. The heritability of CH 4 was 0.25, and ranged from 0.02 to 0.07 for fertility and health traits, and from 0.17 to 0.74 for body conformation traits. Further research with a larger data set should be performed to more accurately establish how CH 4 relates to fertility, health, and body conformation traits in dairy cattle. This will be useful in the design of future breeding goals that consider the production of CH 4 . The Authors. Published by the Federation of Animal Science Societies and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

  4. Economic values for dairy production traits under different milk ...

    African Journals Online (AJOL)

    Cuthbert

    A well-defined breeding objective forms the basis of a sound breeding programme. .... (ZAR per unit) by breed under different milk payment systems. Milk Buyer. Breed. Trait. A. B. C .... Veerkamp, R.F., Dillon, P., Kelly, A.R. & Groen, A.F., 2002.

  5. Derivation of economic values for production traits in aquaculture species

    NARCIS (Netherlands)

    Janssen, K.P.E.; Berentsen, P.B.M.; Besson, M.B.; Komen, J.

    2017-01-01

    Background:
    In breeding programs for aquaculture species, breeding goal traits are often weighted based on the desired gains but economic gain would be higher if economic values were used instead. The objectives of this study were: (1) to develop a bio-economic model to derive economic values

  6. Genetic Relationships of Carcass Traits with Retail Cut Productivity of Hanwoo Cattle

    Directory of Open Access Journals (Sweden)

    Daeyoung Koh

    2014-10-01

    Full Text Available This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT, back fat thickness (BFT, eye muscle area (EMA, marbling (MAR, and estimated lean yield percentage (ELP as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP, trimmed fats (TFW and TFP and trimmed bones (TBW and TBP as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95 and TFW (0.73, but its genetic correlation with RCP was negligible (0.02. The BFT was negatively correlated with RCP (−0.63, but positively correlated with TFW and TFP (0.77 and 0.70. Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60 and RCP (0.72. The EMA had a relatively strong negative genetic correlation with TFW (−0.64. The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, −0.90, and −0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.

  7. Defining the breeding goal for a sheep breed including production and functional traits using market data.

    Science.gov (United States)

    Theodoridis, A; Ragkos, A; Rose, G; Roustemis, D; Arsenos, G

    2017-11-16

    In this study, the economic values for production and functional traits of dairy sheep are estimated through the application of a profit function model using farm-level technical and economic data. The traits incorporated in the model were milk production, prolificacy, fertility, milking speed, longevity and mastitis occurrence. The economic values for these traits were derived as the approximate partial derivative of the specified profit function. A sensitivity analysis was also conducted in order to examine how potential changes in input and output prices would affect the breeding goal. The estimated economic values of the traits revealed their economic impact on the definition of the breeding goal for the specified production system. Milk production and fertility had the highest economic values (€40.30 and €20.28 per standard genetic deviation (SDa)), while, mastitis only had a low negative value of -0.57 €/SDa. Therefore, breeding for clinical mastitis will have a minor impact on farm profitability because it affects a small proportion of the flock and has low additive variance. The production traits, which include milk production, prolificacy and milking speed, contributed most to the breeding goal (70.0%), but functional traits still had a considerable share (30.0%). The results of this study highlight the importance of the knowledge of economic values of traits in the design of a breeding program. It is also suggested that the production and functional traits under consideration can be categorized as those which can be efficiently treated through genetic improvement (e.g. milk production and fertility) while others would be better dealt with through managerial interventions (e.g. mastitis occurrence). Also, sub-clinical mastitis that affects a higher proportion of flocks could have a higher contribution to breeding goals.

  8. Dissection of additive, dominance, and imprinting effects for production and reproduction traits in Holstein cattle.

    Science.gov (United States)

    Jiang, Jicai; Shen, Botong; O'Connell, Jeffrey R; VanRaden, Paul M; Cole, John B; Ma, Li

    2017-05-30

    Although genome-wide association and genomic selection studies have primarily focused on additive effects, dominance and imprinting effects play an important role in mammalian biology and development. The degree to which these non-additive genetic effects contribute to phenotypic variation and whether QTL acting in a non-additive manner can be detected in genetic association studies remain controversial. To empirically answer these questions, we analyzed a large cattle dataset that consisted of 42,701 genotyped Holstein cows with genotyped parents and phenotypic records for eight production and reproduction traits. SNP genotypes were phased in pedigree to determine the parent-of-origin of alleles, and a three-component GREML was applied to obtain variance decomposition for additive, dominance, and imprinting effects. The results showed a significant non-zero contribution from dominance to production traits but not to reproduction traits. Imprinting effects significantly contributed to both production and reproduction traits. Interestingly, imprinting effects contributed more to reproduction traits than to production traits. Using GWAS and imputation-based fine-mapping analyses, we identified and validated a dominance association signal with milk yield near RUNX2, a candidate gene that has been associated with milk production in mice. When adding non-additive effects into the prediction models, however, we observed little or no increase in prediction accuracy for the eight traits analyzed. Collectively, our results suggested that non-additive effects contributed a non-negligible amount (more for reproduction traits) to the total genetic variance of complex traits in cattle, and detection of QTLs with non-additive effect is possible in GWAS using a large dataset.

  9. The evolution of siderophore production as a competitive trait.

    Science.gov (United States)

    Niehus, Rene; Picot, Aurore; Oliveira, Nuno M; Mitri, Sara; Foster, Kevin R

    2017-06-01

    Microbes have the potential to be highly cooperative organisms. The archetype of microbial cooperation is often considered to be the secretion of siderophores, molecules scavenging iron, where cooperation is threatened by "cheater" genotypes that use siderophores without making them. Here, we show that this view neglects a key piece of biology: siderophores are imported by specific receptors that constrain their use by competing strains. We study the effect of this specificity in an ecoevolutionary model, in which we vary siderophore sharing among strains, and compare fully shared siderophores with private siderophores. We show that privatizing siderophores fundamentally alters their evolution. Rather than a canonical cooperative good, siderophores become a competitive trait used to pillage iron from other strains. We also study the physiological regulation of siderophores using in silico long-term evolution. Although shared siderophores evolve to be downregulated in the presence of a competitor, as expected for a cooperative trait, privatized siderophores evolve to be upregulated. We evaluate these predictions using published experimental work, which suggests that some siderophores are upregulated in response to competition akin to competitive traits like antibiotics. Although siderophores can act as a cooperative good for single genotypes, we argue that their role in competition is fundamental to understanding their biology. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

  10. Repeatability and genotypic correlations of reproductive and productive traits of crossbred beef cattle dams.

    Science.gov (United States)

    Silva, L N; Gasparino, E; Torres Júnior, R A A; Euclides Filho, K; Silva, L O C; Alencar, M M; Souza Júnior, M D; Battistelli, J V F; Silva, S C C

    2015-05-22

    Beef cattle production requires reproductive efficiency. However, measures of reproductive traits are not usually collected; consequently, correlated traits that could be used as indicators would be useful. We examined associations between measures of reproductive and productive efficiency that could be used as selection indicators. Data from 194 dams of the genetic groups Angus x Nelore, Caracu x Nelore, and Valdostana x Nelore collected over 4 years were used. The reproductive traits analyzed were days to heat (DH), calving interval (CI), days to calving (DC), and pregnancy rate (PR). The productive traits were dam weight (DW), body condition score (BCS), calf weight (CW), and weaning rate (WR). The effects on the model were: year, genetic group, reproductive status (RS), age, reproductive rest, and breed of bull (CW and WR). Multivariate analyses were performed, using the Bayesian approach via Gibbs sampling. We conclude that the reproductive measures are ineffective as selection indicators, whereas using dam weight may be a good alternative.

  11. Assessment of the Kid Production Traits of Kacang Goat under Smallholders Production System

    Directory of Open Access Journals (Sweden)

    A Priyono

    2010-05-01

    Full Text Available The main objectives of this study were to assess the influence of environmental (non-genetic factors on kid production traits of Kacang goat under smallholders production system. The study was conducted at the Kacang goat smallholders, located at the centre of Kacang goat in Gundi subdistric, Purwodadi regency, Central Java. The kid production traits evaluated are birth weight, weaning weight, and growth rate till weaning. The environmental factors assessed were: sex (male, female, type of birth (singles, twins, triplets and dam’s parity (1-7. Data were analysed statistically according to the analysis of variance procedure using the General Linear Model (GLM. Least squares analysis revealed that dam’s parity, birth type, and sex of kid were significant sources of variation for birth and weaning weight and pre weaning growth in Kacang kids. The average birth weight, weaning weight and pre weaning growth of males (2.07±0.02 kg; 10.457±0.1 kg; 69.35±0.73 g/d were found to be higher than females (1.95±0.02 kg; 9.15±0.09 kg; 60.73±0.71 g/d. Kid production traits increased with parity, with the largest values at the fourth parity and then slightly decreased thereafter. The average male and female birth weight (2.18+0.03 kg; 2.02+0.03 kg, weaning weight (10.72+0.11 and 9.39+0.13 kg and pre weaning growth (71.63+0.79 and 62.21+0.96 g/d of single kids were heavier than twins, and triplets indicating the influence of the mothering ability of doe. It was recommended, the farmers should consider maternal ability for improvement of weaning weight and growth rate of Kacang kids. (Animal Production 12(2: 111-116 (2010Key Words: Kacang goat, kid production, birth weight, weaning weight, growth rate

  12. Genetics of residual feed intake in growing pigs: Relationships with production traits, and nitrogen and phosphorus excretion traits.

    Science.gov (United States)

    Saintilan, R; Mérour, I; Brossard, L; Tribout, T; Dourmad, J Y; Sellier, P; Bidanel, J; van Milgen, J; Gilbert, H

    2013-06-01

    Residual feed intake (RFI) is defined as the difference between the observed ADFI and the ADFI predicted from production and maintenance requirements. The objectives of this study were to evaluate RFI as a selection criterion to improve feed efficiency and its potential to reduce N and P excretion in 4 pig breeds. Data were collected between 2000 and 2009 in French central test stations for 2 dam breeds [French Landrace (LR) and Large White (LWD)], and 2 sire breeds [Large White (LWS) and Piétrain (PP)]. Numbers of recorded pigs were 6407, 10,694, 2342, and 2448 for the LR, LWD, LWS, and PP breeds, respectively. All PP animals were genotyped for the halothane mutation. This data set was used to calculate RFI equations for each of the 4 breeds, and to estimate genetic parameters for RFI together with growth, carcass, and meat quality traits, and N and P excretion during the test period (35 to 110 kg BW). The RFI explained 20.1% in PP, 26.5% in LWS, 27.6% in LWD, and 29.5% in LR of the phenotypic variability of ADFI. The PP breed differed from the others in this respect, probably due to a lower impact of the variation of body composition on ADFI. Heritability estimates of RFI ranged from 0.21 ± 0.03 (LWD) to 0.33 ± 0.06 (PP) depending on the breed. Heritabilities of N and P excretion traits ranged from 0.29 ± 0.06 to 0.40 ± 0.06. The RFI showed positive genetic correlations with feed conversion ratio (FCR) and excretion traits, these correlations being greater in the sire breeds (from 0.57 to 0.86) than in the dam breeds (from 0.38 to 0.53). Compared with FCR, RFI had weaker genetic correlations with carcass composition, growth rate, and excretion traits. Estimates of genetic correlations between FCR and excretion traits were very close to 1 for all breeds. Finally, excretion traits were, at the genetic level, correlated positively with ADFI, negatively with growth rate and carcass leanness, whereas the halothane n mutation in PP was shown to reduce N and P

  13. Green electronics manufacturing creating environmental sensible products

    CERN Document Server

    Wang, John X

    2012-01-01

    Going ""green"" is becoming a major component of the mission for electronics manufacturers worldwide. While this goal seems simplistic, it poses daunting dilemmas. Yet, to compete effectively in the global economy, manufacturers must take the initiative to drive this crucial movement. Green Electronics Manufacturing: Creating Environmental Sensible Products provides you with a complete reference to design, develop, build, and install an electronic product with special consideration for the product's environmental impacts during its whole life cycle. The author discusses how to integrate the st

  14. The change of pollen traits in gladiolus irradiated by electron beam

    International Nuclear Information System (INIS)

    Zhang Zhiwei; Wang Dan; Zhang Dongxue; Yuan Xianghui

    2007-01-01

    In order to investigate the feasibility of electron beam induced mutation on Gladiolus and the effects of electron beam with different doses on pollen traits, M1 generation pollen traits were studied by use of 3MeV electron beams with seven doses of 0Gy, 40Gy, 80Gy, 120Gy, 160Gy, 200Gy, 240Gy. It has been shown that the sterile pollen rate of M1 generation is higher than that of control. At low dose there had no obvious effects on the viability and germination rate of M1 generation pollen. With the increase of irradiation dose, the viability and germination rate of pollen was decreased and the difference had statistical significance (P<0.05). Comparing (SEM) photograph of the pollen shapes of M1 generation with control, within a certain doses level, mutagenic effects on pollen increased with the dose increasing in the angle of polynology. Variations of mutagenic effect extent were found at the different irradiation dosage. The EST isozymes expression of M1 generation pollen was obviously changed by electron beam irradiation confirmed by use of PAGE electrophoresis. EST patterns of pollen of Gladiolus irradiated at the dose no more than 120Gy were similar to CK, but there were some differences in the vigor of isozymes. The EST bands added or absent had been observed at the dose more than 160Gy compared to CK. There were a special EST band more and 2 EST bands less in plants treated by both 160Gy and 200Gy electron beam irradiation, and a special EST band more and 1 EST bands less in plants treated by 240Gy electron beam irradiation. The vigor of isozymes of plants treated at the dose more than 160Gy showed some respective differences compared to the other treated and CK's. These results revealed that electron beam irradiation is an effective way for Gladiolus breeding. (authors)

  15. Analyses of genetic relationships between linear type traits, fat-to-protein ratio, milk production traits, and somatic cell count in first-parity Czech Holstein cows

    DEFF Research Database (Denmark)

    Zink, V; Zavadilová, L; Lassen, Jan

    2014-01-01

    . The number of animals for each linear type trait was 59 454, except for locomotion, for which 53 424 animals were recorded. The numbers of animals with records of milk production data were 43 992 for milk yield, fat percentage, protein percentage, and fat-to-protein percentage ratio and 43 978 for fat yield...... and protein yield. In total, 27 098 somatic cell score records were available. The strongest positive genetic correlation between production traits and linear type traits was estimated between udder width and fat yield (0.51 ± 0.04), while the strongest negative correlation estimated was between body......Genetic and phenotypic correlations between production traits, selected linear type traits, and somatic cell score were estimated. The results could be useful for breeding programs involving Czech Holstein dairy cows or other populations. A series of bivariate analyses was applied whereby (co...

  16. Genome Wide Association Analysis Reveals New Production Trait Genes in a Male Duroc Population.

    Directory of Open Access Journals (Sweden)

    Kejun Wang

    Full Text Available In this study, 796 male Duroc pigs were used to identify genomic regions controlling growth traits. Three production traits were studied: food conversion ratio, days to 100 KG, and average daily gain, using a panel of 39,436 single nucleotide polymorphisms. In total, we detected 11 genome-wide and 162 chromosome-wide single nucleotide polymorphism trait associations. The Gene ontology analysis identified 14 candidate genes close to significant single nucleotide polymorphisms, with growth-related functions: six for days to 100 KG (WT1, FBXO3, DOCK7, PPP3CA, AGPAT9, and NKX6-1, seven for food conversion ratio (MAP2, TBX15, IVL, ARL15, CPS1, VWC2L, and VAV3, and one for average daily gain (COL27A1. Gene ontology analysis indicated that most of the candidate genes are involved in muscle, fat, bone or nervous system development, nutrient absorption, and metabolism, which are all either directly or indirectly related to growth traits in pigs. Additionally, we found four haplotype blocks composed of suggestive single nucleotide polymorphisms located in the growth trait-related quantitative trait loci and further narrowed down the ranges, the largest of which decreased by ~60 Mb. Hence, our results could be used to improve pig production traits by increasing the frequency of favorable alleles via artificial selection.

  17. Relationships of body weight and carcass quality traits with first lactation milk production in Finnish Ayrshire cows

    NARCIS (Netherlands)

    Liinamo, A.E.; Ojala, M.; Arendonk, van J.A.M.

    1999-01-01

    Relationships of body weight and carcass quality traits with first lactation milk production traits were estimated from a field data set of 28362 Finnish Ayrshire cows, using REML methodology and animal model. Studied body weight traits included heifer and mature live weight, estimated based on

  18. Onion Hybrid Seed Production: Relation with Nectar Composition and Flower Traits.

    Science.gov (United States)

    Soto, Veronica C; Caselles, Cristian A; Silva, Maria F; Galmarini, Claudio R

    2018-05-28

    Onion (Allium cepa L.) is one of the main vegetable crops. Pollinators are required for onion seed production, being honeybees the most used. Around the world, two types of onion varieties are grown: open pollinated (OP) and hybrids. Hybrids offer numerous advantages to growers, but usually have lower seed yields than OP cultivars, which in many cases compromise the success of new hybrids. As pollination is critical for seed set, understanding the role of floral rewards and attractants to pollinator species is the key to improve crop seed yield. In this study, the correlation of nectar-analyzed compounds, floral traits, and seed yield under open field conditions in two experimental sites was determined. Nectar composition was described through the analysis of sugars, phenol, and alkaloid compounds. Length and width of the style and tepals of the flowers were measured to describe floral traits. Floral and nectar traits showed differences among the studied lines. For nectar traits, we found a significant influence of the environment where plants were cultivated. Nonetheless, flower traits were not influenced by the experimental sites. The OP and the male-sterile lines (MSLs) showed differences in nectar chemical composition and floral traits. In addition, there were differences between and within MSLs, some of which were correlated with seed yield, bringing the opportunity to select the most productive MSL, using simple determinations of morphological characters like the length of the style or tepals size.

  19. Organic dairy farmers put more emphasis on production traits than conventional farmers

    DEFF Research Database (Denmark)

    Slagboom, Margot; Kargo, Morten; Edwards, David

    2016-01-01

    The overall aim of this research was to characterize the preferences of Danish dairy farmers for improvements in breeding goal traits. The specific aims were (1) to investigate the presence of heterogeneity in farmers’ preferences by means of cluster analysis, and (2) to associate these clusters...... with herd characteristics and production systems (organic or conventional). We established a web-based survey to characterize the preferences of farmers for improvements in 10 traits, by means of pairwise rankings. We also collected a considerable number of herd characteristics. Overall, 106 organic farmers...... and 290 conventional farmers answered the survey, all with Holstein cows. The most preferred trait improvement was cow fertility, and the least preferred was calving difficulty. By means of cluster analysis, we identified 4 distinct clusters of farmers and named them according to the trait improvements...

  20. Genetic divergence among interspecific Paspalum hybrids based on seed production traits

    Directory of Open Access Journals (Sweden)

    Rodrigo Ramos Lopes

    Full Text Available ABSTRACT The use of genetic divergence as a basis for identifying superior individuals, with greater heterozygosity, is important in view of the difficulty when selecting of dissimilar genotypes exhibiting high average for interest traits. The aim of this study was to evaluate the genetic divergence and the expression of seed production traits in seventeen apomictic Paspalum plicatulum × Paspalum guenoarum hybrids and two male parents (P. guenoarum. A randomized block design was used, with genotypes individually arranged into ten blocks. The following traits were assessed: total number of tillers/plant (TT, reproductive tiller/plant (RT, number of racemes per inflorescence (NRI, reproductive tiller height (RTH, inflorescence rachis length (IRL, number of seeds/inflorescence (NSI, weight of a thousand seeds (WTS and seed production (SP. Genetic divergence among the genotypes was estimated using the Tocher method and UPGMA clustering, based on the generalized Mahalanobis distance (D2 ii’. The Tocher and UPGMA optimization methods showed high concordance. The traits that most contributed to genetic divergence were RTH (23.59%, IRL (21.63%, WTS (16.67% and SP (14.23%. The presence of genetic diversity made it possible to identify divergent genotypes and those with high means for the traits studied, allowing the selection of genotypes with significant breeding potential. Repeated cross-breeding of female superior plants with the genotypes Azulão and H20 can result in a high heterosis effect on seed production characteristics.

  1. Production traits of artificially and naturally hatched geese in intensive and free-range systems: I. Growth traits.

    Science.gov (United States)

    Boz, M A; Sarica, M; Yamak, U S

    2017-04-01

    1. This study investigated the effect of incubation type and production system on geese growth traits. 2. A total of 216 geese were either naturally (114) or artificially (102) hatched and reared in intensive or free-range production systems (4 replicates each) until 18 weeks of age. 3. Weights of naturally hatched goslings (NHG) were significantly higher than artificially hatched goslings (AHG) at 2 weeks (644 vs. 536 g); however, weights of AHG were significantly higher than NHG at both 6 weeks (3245 vs. 3010 g) and 18 weeks (5212 vs. 4353 g). 4. AHG had better feed conversion ratios (FCRs) than NHG (6.21 vs. 6.46 at 18 weeks). Feed consumption of naturally hatched geese was found higher in first 4 weeks when compared to artificially hatched geese and artificially hatched geese consumed more feed than naturally hatched geese after 8 weeks. 5. Production system had insignificant effects on feed consumption, FCRs, viability and mutilation rates. 6. Slipped wings were more frequent in NHG than AHG (8.32% vs. 1.68% at 6 weeks; 23.84% vs. 5.12% between 7 and 18 weeks) and in free-range production when compared to intensive production (17.88% vs. 11.08% over the course of the production period). 7. The study results indicate that both artificially and NHG can be reared in free-range production systems without any loss in performance and in deference to animal welfare.

  2. EXPLORING THE RELATIONSHIP BETWEEN LEADERSHIP COMMUNICATION STYLE, PERSONALITY TRAIT AND ORGANIZATIONAL PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    Oludele Mayowa Solaja

    2016-05-01

    Full Text Available In organizational research and practice, prolific communication is significantly linked with quality leadership traits. Leadership quality helps in mitigating the failure of an organization to survive the increasing business challenges that may result in waste of resources, talents and potentials needed for achieving optimal organizational productivity. However, an examination of academic literatures reveal that corporate leaders are often faced with the challenge of how to move smoothly between different communication styles to communicate clearly articulating ideas and knowledge to employee’s whenever the occasion demands which hinders organizational productivity. Against this background, this study explores the relationship between leadership communication style, personality trait and organizational productivity. The study utilized cross-sectional survey method. Participants were 112 academic staff of University of Lagos, Nigeria who was selected through multi-stage sampling techniques. Data were collected through structured questionnaire and personal observation. Results show that there exists a connection between leadership communication style and personality trait. Also, the finding revealed that leadership communication style determines organization productivity. More so, the finding established that personality traits and communication styles have combine effect on organizational productivity. Conclusively, the findings were discussed with reference to relevant empirical literatures with recommendations for management of organizations both for practice and future research highlighted.

  3. Electronic cigarettes: product characterisation and design considerations

    OpenAIRE

    Brown, Christopher J; Cheng, James M

    2014-01-01

    Objective To review the available evidence regarding electronic cigarette (e-cigarette) product characterisation and design features in order to understand their potential impact on individual users and on public health. Methods Systematic literature searches in 10 reference databases were conducted through October 2013. A total of 14 articles and documents and 16 patents were included in this analysis. Results Numerous disposable and reusable e-cigarette product options exist, representing w...

  4. Production of Medical Isotopes with Electron Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Rotsch, D A; Alford, K.; Bailey, J. L.; Bowers, D. L.; Brossard, T.; Brown, M. A.; Chemerisov, S. D.; Ehst, D.; Greene, J.; Gromov, R. G.; Grudzinski, J.J.; Hafenrichter, L.; Hebden, A. S.; Henning, W.; Heltemes, T. A.; Jerden, J.; Jonah, C. D.; Kalensky, M.; Krebs, J. F.; Makarashvili, V.; Micklich, B.; Nolen, J.; Quigley, K. J.; Schneider, J. F.; Smith, N. A.; Stepinski, D. C.; Sun, Z.; Tkac, P.; Vandegrift, G. F.; Virgo, M J; Wesolowski, K. A.; Youker, A. J.

    2017-06-01

    Radioisotopes play important roles in numerous areas ranging from medical treatments to national security and basic research. Radionuclide production technology for medical applications has been pursued since the early 1900s both commercially and in nuclear science centers. Many medical isotopes are now in routine production and are used in day-to-day medical procedures. Despite these advancements, research is accelerating around the world to improve the existing production methodologies as well as to develop novel radionuclides for new medical appli-cations. Electron linear accelerators (linacs) represent a unique method for the production of radioisotopes. Even though the basic technology has been around for decades, only recently have electron linacs capable of producing photons with sufficient energy and flux for radioisotope production become available. Housed in Argonne Nation-al Laboratory’s Low Energy Accelerator Facility (LEAF) is a newly upgraded 55 MeV/25-kW electron linear ac-celerator, capable of producing a wide range of radioiso-topes. This talk will focus on the work being performed for the production of the medical isotopes 99Mo (99Mo/99mTc generator), 67Cu, and 47Sc.

  5. Effect of Production System on Welfare Traits, Growth Performance ...

    African Journals Online (AJOL)

    Duck feather quality was greater and gait defects were reduced in NRS system compared with FRS and WRS systems. Fluctuating asymmetry (FA) was not affected by the production system. Growth performance was not significantly different between FRS and WRS systems. Average daily weight gain of FRS ducks was ...

  6. Relationship between genetic similarity and some productive traits ...

    African Journals Online (AJOL)

    Admin

    Random amplified polymorphic DNA (RAPD) technique was applied to detect genetic similarity between five local chicken strains that have been selected for eggs and meat production in Egypt. Based on six oligonucleotide primers, the genetic similarity between the egg-producing strains (Anshas, Silver. Montazah and ...

  7. Electronic tagging and integrated product intelligence

    Science.gov (United States)

    Swerdlow, Martin; Weeks, Brian

    1996-03-01

    The advent of 'intelligent,' electronic data bearing tags is set to revolutionize the way industrial and retail products are identified and tracked throughout their life cycles. The dominant system for unique identification today is the bar code, which is based on printed symbology and regulated by the International Article Numbering Association. Bar codes provide users with significant operational advantages and generate considerable added value to packaging companies, product manufacturers, distributors and retailers, across supply chains in many different sectors, from retailing, to baggage handling and industrial components, e.g., for vehicles or aircraft. Electronic tags offer the potential to: (1) record and store more complex data about the product or any modifications which occur during its life cycle; (2) access (and up-date) stored data in real time in a way which does not involve contact with the product or article; (3) overcome the limitations imposed by systems which rely on line-of-sight access to stored data. Companies are now beginning to consider how electronic data tags can be used, not only to improve the efficiency of their supply chain processes, but also to revolutionize the way they do business. This paper reviews the applications and business opportunities for electronic tags and outlines CEST's strategy for achieving an 'open' standard which will ensure that tags from different vendors can co-exist on an international basis.

  8. Effect of calf sex on some productive, reproductive and health traits in Holstein cows

    International Nuclear Information System (INIS)

    Chegini, A.; Hossein-Zadeh, N.G.; Hosseini-Moghadam, H.

    2015-01-01

    Records of Holstein cows from March 1992 to April 2008 from 194 large herds and comprising from 402,716 records for productive traits to 178,344 records of somatic cell count were used to study the effect of calf sex in different parities and calving season on the subsequent productive, reproductive and health traits in Holstein cows. T-test procedure of SAS software was used to investigate the effect of calf sex and season of calving on aforementioned traits. Cows with female calves had higher milk and fat yield, persistency of milk and fat yield and longer lactation length, while cows that gave birth to male calves had shorter calving interval and longer productive life. Also, cows with female calves had higher milk yield per day of lactation in the first two parities, but there was no difference in milk yield per day of lactation for parities ≥ 3. There was no relationship among mean somatic cell count and sex of born calf. Fall calves had the highest adjusted milk yield and milk yield per day of lactation, however, winter calves had the longest lactation lengthand productive life and the highest somatic cell count. Results from this study demonstrate that it seems necessary to consider the effect of calf sex on aforementioned traits when making decision to use sexed semen or conventional semen. (Author)

  9. Effect of calf sex on some productive, reproductive and health traits in Holstein cows

    Energy Technology Data Exchange (ETDEWEB)

    Chegini, A.; Hossein-Zadeh, N.G.; Hosseini-Moghadam, H.

    2015-07-01

    Records of Holstein cows from March 1992 to April 2008 from 194 large herds and comprising from 402,716 records for productive traits to 178,344 records of somatic cell count were used to study the effect of calf sex in different parities and calving season on the subsequent productive, reproductive and health traits in Holstein cows. T-test procedure of SAS software was used to investigate the effect of calf sex and season of calving on aforementioned traits. Cows with female calves had higher milk and fat yield, persistency of milk and fat yield and longer lactation length, while cows that gave birth to male calves had shorter calving interval and longer productive life. Also, cows with female calves had higher milk yield per day of lactation in the first two parities, but there was no difference in milk yield per day of lactation for parities ≥ 3. There was no relationship among mean somatic cell count and sex of born calf. Fall calves had the highest adjusted milk yield and milk yield per day of lactation, however, winter calves had the longest lactation lengthand productive life and the highest somatic cell count. Results from this study demonstrate that it seems necessary to consider the effect of calf sex on aforementioned traits when making decision to use sexed semen or conventional semen. (Author)

  10. Genomic selection using indicator traits to reduce the environmental impact of milk production

    DEFF Research Database (Denmark)

    Hansen Axelsson, H; Fikse, W F; Kargo, Morten

    2013-01-01

    The aim of this simulation study was to test the hypothesis that phenotype information of specific indicator traits of environmental importance recorded on a small-scale can be implemented in breeding schemes with genomic selection to reduce the environmental impact of milk production. A stochastic...... was, however, best in the scenarios where the genetic correlation between IT and EI was ≥0.30 and the accuracy of direct genomic value was ≥0.40. The genetic gain in EI was 26 to 34% higher when indicator traits such as greenhouse gases in the breath of the cow and methane recorded in respiration...... of direct genomic values will be reasonably high...

  11. 21 CFR 1003.2 - Defect in an electronic product.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Defect in an electronic product. 1003.2 Section... electronic product. For the purpose of this part, an electronic product shall be considered to have a defect which relates to the safety of use by reason of the emission of electronic product radiation if: (a) It...

  12. The Analysis of Product Traits and Innovation Process of Multi Level Marketing Business at Talk Fusion

    OpenAIRE

    Suwarno, Sutrisno

    2013-01-01

    Multi Level Marketing Business nowadays is rapidly growing. In recent years, there have been so many new Multi Level Marketing Business coming out with their own specific offers and products. One of the advantages of MLM Business is the contribution it makes to economic growth. It makes it possible for the national income to continuously grow. The objectives can be achieved from this research are to examine product traits and innovation process of Talk Fusion. Theories supporting research are...

  13. Schizotypal traits in painters: Relations with intelligence, creativity and creative productivity

    Directory of Open Access Journals (Sweden)

    Međedović Janko

    2017-01-01

    Full Text Available In the present research we explored the presence of schizotypal traits in painters. Furthermore, the relations of schizotypy and creativity-related variables (intelligence, creativity and creative productivity were analyzed. Study participants were divided into the criterion (132 students of art academy and art high school and control group (119 psychology students and members of grammar school. Two hypotheses were set: 1 schizotypal traits are more pronounced in painters than in control group; 2 schizotypy is more closely associated with the creativitylinked variables in the criterion than in control group. Schizotypy was operationalized by Disintegration construct and measured via DELTA 10 inventory. Intelligence was assessed by Advanced Progressive Matrices-18; creativity was measured by the same labeled scale from HEXACO-PI-R inventory and creative productivity was explored by a set of questions regarding the frequency of creative behavior. Results showed that Magical thinking, Enhanced awareness, Somatoform Dysregulation, Perceptual distortions and Social anhedonia were the schizotypal traits which were more pronounced in painters as compared to the control group. Factor analyses performed in each group separately revealed a latent component loaded both with schizotypal traits, creativity and creative productivity, but only in the group of painters: schizotypy and creativity were not so closely related in the control group. Thus, the study hypotheses were largely confirmed. Results provide a more detailed understanding of the relations between schizotypy and creativity.

  14. Spectral-Product Methods for Electronic Structure Calculations (Preprint)

    National Research Council Canada - National Science Library

    Langhoff, P. W; Mills, J. E; Boatz, J. A

    2006-01-01

    .... The spectral-product approach to molecular electronic structure avoids the repeated evaluations of the one- and two-electron integrals required in construction of polyatomic Hamiltonian matrices...

  15. Spectral-Product Methods for Electronic Structure Calculations (Postprint)

    National Research Council Canada - National Science Library

    Langhoff, P. W; Hinde, R. J; Mills, J. D; Boatz, J. A

    2007-01-01

    .... The spectral-product approach to molecular electronic structure avoids the repeated evaluations of the one- and two-electron integrals required in construction of polyatomic Hamiltonian matrices...

  16. Effects of the DGAT1 polymorphism on test-day milk production traits throughout lactation

    DEFF Research Database (Denmark)

    Bovenhuis, Henk; Visker, H P W; van Valenberg, H J F

    2015-01-01

    Several studies have shown that the diacylglycerol O-acyltransferase 1 (DGAT1) K232A polymorphism has a major effect on milk production traits. It is less clear how effects of DGAT1 on milk production traits change throughout lactation, if dominance effects of DGAT1 are relevant, and whether DGAT1...... also affects lactose content, lactose yield, and total energy output in milk. Results from this study, using test-day records of 3 subsequent parities of around 1,800 cows, confirm previously reported effects of the DGAT1 polymorphism on milk, fat, and protein yield, as well as fat and protein content....... In addition, we found significant effects of the DGAT1 polymorphism on lactose content and lactose yield. No significant effects on somatic cell score were detected. The effect of DGAT1 on total energy excreted in milk was only significant in parity 1 and is mainly due to a higher energy output in milk...

  17. Electronic cigarettes: product characterisation and design considerations.

    Science.gov (United States)

    Brown, Christopher J; Cheng, James M

    2014-05-01

    To review the available evidence regarding electronic cigarette (e-cigarette) product characterisation and design features in order to understand their potential impact on individual users and on public health. Systematic literature searches in 10 reference databases were conducted through October 2013. A total of 14 articles and documents and 16 patents were included in this analysis. Numerous disposable and reusable e-cigarette product options exist, representing wide variation in product configuration and component functionality. Common e-cigarette components include an aerosol generator, a flow sensor, a battery and a nicotine-containing solution storage area. e-cigarettes currently include many interchangeable parts, enabling users to modify the character of the delivered aerosol and, therefore, the product's 'effectiveness' as a nicotine delivery product. Materials in e-cigarettes may include metals, rubber and ceramics. Some materials may be aerosolised and have adverse health effects. Several studies have described significant performance variability across and within e-cigarette brands. Patent applications include novel product features designed to influence aerosol properties and e-cigarette efficiency at delivering nicotine. Although e-cigarettes share a basic design, engineering variations and user modifications result in differences in nicotine delivery and potential product risks. e-cigarette aerosols may include harmful and potentially harmful constituents. Battery explosions and the risks of exposure to the e-liquid (especially for children) are also concerns. Additional research will enhance the current understanding of basic e-cigarette design and operation, aerosol production and processing, and functionality. A standardised e-cigarette testing regime should be developed to allow product comparisons.

  18. Genetic relationship between body condition score, fertility, type and production traits in Brown Swiss dairy cows

    Directory of Open Access Journals (Sweden)

    Martino Cassandro

    2010-01-01

    Full Text Available This study aimed to investigate the relationship between body condition score (BCS, calving interval (CI, angularity (ANG, strength (FV and milk yield (MY on Brown Swiss cattle using data collected in the alpine provinces of Bolzano- Bozen and Trentino. The data set consisted of 28,538 test day records of BCS and MY from 3,282 Brown Swiss cows in lactation reared in 109 herds; production traits were merged with 13,796 repeated individual calving interval records and 38,711 type traits records. A multi-traits REML animal model was used to estimate (covariance components, with repeated observations. Heritability estimates for BCS, FV and ANG was 18%, 18% and 27%, respectively, while estimates for CI was very low (2%. Genetic correlations between CI and BCS was -0.44; between BCS and ANG was - 0.64; between BCS and MY was -0.35; between ANG and CI was 0.12. In conclusion, the selection for MY and ANG negatively affect fertility and average condition score of Brown cows. BCS recorded during lactation could be proposed as a useful trait for indirect selection aimed to improve fertility of cows.

  19. Inbreeding effects on in vitro embryo production traits in Guzerá cattle.

    Science.gov (United States)

    Perez, B C; Balieiro, J C C; Ventura, R V; Bruneli, F A T; Peixoto, M G C D

    2017-11-01

    Inbreeding has been associated with the impairment of reproductive performance in many cattle breeds. Although the usage of reproductive biotechnologies has been increasing in bovine populations, not much attention has been given to the impact of inbreeding over cow's performance on artificial reproduction. The objective of this study was to estimate the impact of inbreeding on in vitro embryo production in a Guzerá breed population. The inbreeding coefficient (F), calculated as half of the co-ancestry of the individual's parents, was used as an estimate of inbreeding. The inbreeding coefficients of the donor, sire (used on in vitro fertilization) and of the embryos were included, separately, in the proposed models either as classificatory or continuous variables (linear and quadratic effects). The percentage of non-inbred individuals (or embryos) and mean F of donors, embryos and sires were 29.38%; 35.76%; 42.86% and 1.98±2.68; 1.32±3.13; 2.08±2.79, respectively. Two different models were considered, one for oocyte production traits and other for embryo production traits. The increase of F of the donor significantly (P0.05) effects were observed for the sire (father of the embryos) inbreeding coefficient over the traits analysed. Embryo's F influenced (Ptechnology. High levels of inbreeding should be avoided when selecting Guzerá female donors and planning in vitro fertilization mating.

  20. Morphogenetic, structural and productive traits of buffel grass under different irrigation regimes

    Directory of Open Access Journals (Sweden)

    Maria Janiele Ferreira Coutinho

    2015-06-01

    Full Text Available The water restriction conditions in the Brazilian semiarid region are one of the most limiting factors to the establishment and yield of forage grasses. This study aimed to evaluate the effect of different irrigation regimes on morphogenetic, structural and productive traits of buffel grass. Arandomized blocks design, with five treatments and six replications, was used. Treatments consisted of five irrigation regimes, corresponding to the intervals of 2, 4, 6, 8 and 10 days. The traits analyzed were: leaf emergence rate, phyllochron, leaf and stem elongation rate, leaf senescence rate, final leaf length, number of green leaves per tiller, number of tillers, stem height, leaf/stem ratio, leaf area index, dry mass of green leaf and stem, dry mass of green, dead and total forage, root dry mass, dry mass and green dry mass/dead dry mass ratio. The final leaf length and dead forage dry mass were not affected by the irrigation regimes. The leaf/stem ratio followed a quadratic model, maintaining the value of 0.51 up to the irrigation regime of four days. The other morphological, structural and productive traits decreased linearly with increasing irrigation frequencies. The irrigation intervals promoted reductions in the morphological, structural and productive parameters of buffel grass, when grown under greenhouse conditions. The irrigation regime of 2 days stands out as the least restrictive to the development of buffel grass.

  1. Heritability of rectal temperature and genetic correlations with production and reproduction traits in dairy cattle.

    Science.gov (United States)

    Dikmen, S; Cole, J B; Null, D J; Hansen, P J

    2012-06-01

    Genetic selection for body temperature during heat stress might be a useful approach to reduce the magnitude of heat stress effects on production and reproduction. Objectives of the study were to estimate the genetic parameters of rectal temperature (RT) in dairy cows in freestall barns under heat stress conditions and to determine the genetic and phenotypic correlations of rectal temperature with other traits. Afternoon RT were measured in a total of 1,695 lactating Holstein cows sired by 509 bulls during the summer in North Florida. Genetic parameters were estimated with Gibbs sampling, and best linear unbiased predictions of breeding values were predicted using an animal model. The heritability of RT was estimated to be 0.17 ± 0.13. Predicted transmitting abilities for rectal temperature changed 0.0068 ± 0.0020°C/yr from (birth year) 2002 to 2008. Approximate genetic correlations between RT and 305-d milk, fat, and protein yields, productive life, and net merit were significant and positive, whereas approximate genetic correlations between RT and somatic cell count score and daughter pregnancy rate were significant and negative. Rectal temperature during heat stress has moderate heritability, but genetic correlations with economically important traits mean that selection for RT could lead to lower productivity unless methods are used to identify genes affecting RT that do not adversely affect other traits of economic importance. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  2. Epigenetics and developmental programming of welfare and production traits in farm animals.

    Science.gov (United States)

    Sinclair, K D; Rutherford, K M D; Wallace, J M; Brameld, J M; Stöger, R; Alberio, R; Sweetman, D; Gardner, D S; Perry, V E A; Adam, C L; Ashworth, C J; Robinson, J E; Dwyer, C M

    2016-07-21

    The concept that postnatal health and development can be influenced by events that occur in utero originated from epidemiological studies in humans supported by numerous mechanistic (including epigenetic) studies in a variety of model species. Referred to as the 'developmental origins of health and disease' or 'DOHaD' hypothesis, the primary focus of large-animal studies until quite recently had been biomedical. Attention has since turned towards traits of commercial importance in farm animals. Herein we review the evidence that prenatal risk factors, including suboptimal parental nutrition, gestational stress, exposure to environmental chemicals and advanced breeding technologies, can determine traits such as postnatal growth, feed efficiency, milk yield, carcass composition, animal welfare and reproductive potential. We consider the role of epigenetic and cytoplasmic mechanisms of inheritance, and discuss implications for livestock production and future research endeavours. We conclude that although the concept is proven for several traits, issues relating to effect size, and hence commercial importance, remain. Studies have also invariably been conducted under controlled experimental conditions, frequently assessing single risk factors, thereby limiting their translational value for livestock production. We propose concerted international research efforts that consider multiple, concurrent stressors to better represent effects of contemporary animal production systems.

  3. Genetic analyses of partial egg production in Japanese quail using multi-trait random regression models.

    Science.gov (United States)

    Karami, K; Zerehdaran, S; Barzanooni, B; Lotfi, E

    2017-12-01

    1. The aim of the present study was to estimate genetic parameters for average egg weight (EW) and egg number (EN) at different ages in Japanese quail using multi-trait random regression (MTRR) models. 2. A total of 8534 records from 900 quail, hatched between 2014 and 2015, were used in the study. Average weekly egg weights and egg numbers were measured from second until sixth week of egg production. 3. Nine random regression models were compared to identify the best order of the Legendre polynomials (LP). The most optimal model was identified by the Bayesian Information Criterion. A model with second order of LP for fixed effects, second order of LP for additive genetic effects and third order of LP for permanent environmental effects (MTRR23) was found to be the best. 4. According to the MTRR23 model, direct heritability for EW increased from 0.26 in the second week to 0.53 in the sixth week of egg production, whereas the ratio of permanent environment to phenotypic variance decreased from 0.48 to 0.1. Direct heritability for EN was low, whereas the ratio of permanent environment to phenotypic variance decreased from 0.57 to 0.15 during the production period. 5. For each trait, estimated genetic correlations among weeks of egg production were high (from 0.85 to 0.98). Genetic correlations between EW and EN were low and negative for the first two weeks, but they were low and positive for the rest of the egg production period. 6. In conclusion, random regression models can be used effectively for analysing egg production traits in Japanese quail. Response to selection for increased egg weight would be higher at older ages because of its higher heritability and such a breeding program would have no negative genetic impact on egg production.

  4. Electron irradiation of dry food products

    International Nuclear Information System (INIS)

    Gruenewald, Th.

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system. (author)

  5. Electron irradiation of dry food products

    Energy Technology Data Exchange (ETDEWEB)

    Gruenewald, Th [Bundesbahn-Zentralamt, Minden (Germany, F.R.)

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system.

  6. Digital HCAL Electronics: Status of Production

    Energy Technology Data Exchange (ETDEWEB)

    Drake, Gary; Repond, Jose, E-mail: drake@hep.anl.gov [Argonne National Laboratory (United States)

    2011-04-01

    This is a status report of the production of the readout electronics for the Digital Hadron Calorimeter (DHCAL) prototype. The prototype will be equipped with Resistive Plate Chambers (RPCs), read out with 1 x 1 cm{sup 2} pads. The readout of each channel is simplified to provide a yes or no (digital readout) within a time bin of 100 ns. Each detector layer with an area of 96 x 96 cm{sup 2} contains close to 10,000 readout channels. The total channel count for the entire prototype calorimeter with 38 active layers is approximately 350,000.

  7. Analysing Amazonian forest productivity using a new individual and trait-based model (TFS v.1)

    Science.gov (United States)

    Fyllas, N. M.; Gloor, E.; Mercado, L. M.; Sitch, S.; Quesada, C. A.; Domingues, T. F.; Galbraith, D. R.; Torre-Lezama, A.; Vilanova, E.; Ramírez-Angulo, H.; Higuchi, N.; Neill, D. A.; Silveira, M.; Ferreira, L.; Aymard C., G. A.; Malhi, Y.; Phillips, O. L.; Lloyd, J.

    2014-07-01

    Repeated long-term censuses have revealed large-scale spatial patterns in Amazon basin forest structure and dynamism, with some forests in the west of the basin having up to a twice as high rate of aboveground biomass production and tree recruitment as forests in the east. Possible causes for this variation could be the climatic and edaphic gradients across the basin and/or the spatial distribution of tree species composition. To help understand causes of this variation a new individual-based model of tropical forest growth, designed to take full advantage of the forest census data available from the Amazonian Forest Inventory Network (RAINFOR), has been developed. The model allows for within-stand variations in tree size distribution and key functional traits and between-stand differences in climate and soil physical and chemical properties. It runs at the stand level with four functional traits - leaf dry mass per area (Ma), leaf nitrogen (NL) and phosphorus (PL) content and wood density (DW) varying from tree to tree - in a way that replicates the observed continua found within each stand. We first applied the model to validate canopy-level water fluxes at three eddy covariance flux measurement sites. For all three sites the canopy-level water fluxes were adequately simulated. We then applied the model at seven plots, where intensive measurements of carbon allocation are available. Tree-by-tree multi-annual growth rates generally agreed well with observations for small trees, but with deviations identified for larger trees. At the stand level, simulations at 40 plots were used to explore the influence of climate and soil nutrient availability on the gross (ΠG) and net (ΠN) primary production rates as well as the carbon use efficiency (CU). Simulated ΠG, ΠN and CU were not associated with temperature. On the other hand, all three measures of stand level productivity were positively related to both mean annual precipitation and soil nutrient status

  8. Scalar electron production in e+e- annihilation

    International Nuclear Information System (INIS)

    Kuroda, M.; Kobayashi, T.; Yamada, S.; Ishikawa, K.

    1983-05-01

    The single scalar electron production process e + e - -> esup(+-) + Photino + scalar electron (scalar electron -> esup(-+) + Photino), with the detection of e + as well as e - , provides a clean method to detect scalar electrons when their masses are not lighter than the beam energy. We made a complete calculation of the process and evaluated the production cross sections. (orig.)

  9. Looking for Guidelines for the Production of Electronic Textbooks.

    Science.gov (United States)

    Landoni, M.; Wilson, R.; Gibb, F.

    2001-01-01

    Reports the results of two studies of electronic book production, including production on the World Wide Web, and explains EBONI (Electronic Books On-screen Interface) that focuses on the evaluation of electronic resources and compiling guidelines for publishing electronic materials on the Internet for the United Kingdom higher education…

  10. Economic values for production traits for different sheep breeds in Kosovo

    Directory of Open Access Journals (Sweden)

    Hysen Bytyqi

    2015-10-01

    Full Text Available Generally, all traits of economic importance should be included in the breeding goal of livestock breeding programmes. The main aim of this study was to examine economic values for a combination of dairy and meat traits of the dual purpose Bardhoka (BAR, Balusha (BAL, Sharri (SHA and Kosova (KOS sheep breeds in Kosovo. The underlying herd model is based on a deterministic approach considering a sheep flock with milk production, lamb fattening and replacement stock. In order to examine the economic impact for different sheep breeds, the production traits considered were milk (milk yield and fattening (daily gain. For each lactation cycle among the breeds the main revenues resulted from selling milk (€ 61.82/46.03/26.37/27.22 and fattened lambs (€ 34.06/39.88/35.42/33.92 for BAR/BAL/ SHA/KOS, respectively. For BAR and BAL the economic value per average ewe place and year was € 37.7 for both breeds, while for SHA and KOS it was € 35.1 and € 32.5, respectively. For lamb fattening, daily gain was found to have the highest economic value at € 7.00 for BAL, SHA and KOS, while for BAR it was € 6.67. The relative economic values for milk yield and daily gain for BAR, BAL, SHA and KOS were 84.96:15.04, 84.42:15.58, 83.45:16.55, and 82.36:17.64, respectively.

  11. Hydrogen peroxide production and myo-inositol metabolism as important traits for virulence of Mycoplasma hyopneumoniae.

    Science.gov (United States)

    Ferrarini, M G; Mucha, S G; Parrot, D; Meiffren, G; Bachega, J F R; Comte, G; Zaha, A; Sagot, M F

    2018-04-06

    Mycoplasma hyopneumoniae is the causative agent of enzootic pneumonia. In our previous work, we reconstructed the metabolic models of this species along with two other mycoplasmas from the respiratory tract of swine: Mycoplasma hyorhinis, considered less pathogenic but which nonetheless causes disease and Mycoplasma flocculare, a commensal bacterium. We identified metabolic differences that partially explained their different levels of pathogenicity. One important trait was the production of hydrogen peroxide from the glycerol metabolism only in the pathogenic species. Another important feature was a pathway for the metabolism of myo-inositol in M. hyopneumoniae. Here, we tested these traits to understand their relation to the different levels of pathogenicity, comparing not only the species but also pathogenic and attenuated strains of M. hyopneumoniae. Regarding the myo-inositol metabolism, we show that only M. hyopneumoniae assimilated this carbohydrate and remained viable when myo-inositol was the primary energy source. Strikingly, only the two pathogenic strains of M. hyopneumoniae produced hydrogen peroxide in complex medium. We also show that this production was dependent on the presence of glycerol. Although further functional tests are needed, we present in this work two interesting metabolic traits of M. hyopneumoniae that might be directly related to its enhanced virulence. This article is protected by copyright. All rights reserved. © 2018 John Wiley & Sons Ltd.

  12. Consumer Innovativeness Model of Indonesian Young People in Adopting Electronic Products

    Directory of Open Access Journals (Sweden)

    Reza Ashari Nasution

    2012-06-01

    Full Text Available It is important for marketers to understand how innovators respond to the introduction of new products. This paper investigates consumer innovativeness (CI from meta-analysis study as suggested by Nasution and Garnida [2011] and examines the simultaneous impacts of CI on new product adoption. Nasution and Garnida [2010] proposed three different perspectives in conceptualizing the CI model. First, the generalist stream that represents a generalized personality trait that engenders consumers to adopt new product. Second, the particularist stream that focuses on product adoption behavior within a specific domain of interest. Third, the integrator perspective that proposes to integrate these two streams by putting domain-specific innovativeness as a mediating factor in relationship between general innovativeness trait and new product adoption.A structural equation model is used to test hypotheses using empirical data from 607 respondents in electronic products adoption. The result shows that the integrator perspective provides the best model in representing the empirical data. The finding of the integrator perspective reveals that domain specific CI mediates the relationship between general innovativeness trait and new product adoption. Specifically, subjective knowledge and hedonic idea shopping enhances the actuality of new products.The findings provide an explanation to the less than consistent relationship between consumer innovativeness and new product adoption. However, a single research context of electronic products and student sample may become one of the limitations and future studies needed to replicate the perspective of CI in different research contexts for greater generalizability and the use of non-student sample. The findings have implications for the innovation adoption theory, for managers involved in the introduction of new products, and for future research on innovation adoption.

  13. Beyond mean functional traits: Influence of functional trait profiles on forest structure, production, and mortality across the eastern US

    Science.gov (United States)

    Matthew B. Russell; Christopher W. Woodall; Anthony W. D' Amato; Grant M. Domke; Sassan S. Saatchi

    2014-01-01

    Plant functional traits (PFTs) have increased in popularity in recent years to describe various ecosystems and biological phenomena while advancing general ecological principles. To date, few have investigated distributional attributes of individual PFTs and their relationship with key attributes and processes of forest ecosystems. The objective of this study was to...

  14. Mapping quantitative trait loci (QTL in sheep. II. Meta-assembly and identification of novel QTL for milk production traits in sheep

    Directory of Open Access Journals (Sweden)

    Lam Mary K

    2009-10-01

    Full Text Available Abstract An (Awassi × Merino × Merino backcross family of 172 ewes was used to map quantitative trait loci (QTL for different milk production traits on a framework map of 200 loci across all autosomes. From five previously proposed mathematical models describing lactation curves, the Wood model was considered the most appropriate due to its simplicity and its ability to determine ovine lactation curve characteristics. Derived milk traits for milk, fat, protein and lactose yield, as well as percentage composition and somatic cell score were used for single and two-QTL approaches using maximum likelihood estimation and regression analysis. A total of 15 significant (P P http://crcidp.vetsci.usyd.edu.au/cgi-bin/gbrowse/oaries_genome/. Many of the QTL for milk production traits have been reported on chromosomes 1, 3, 6, 16 and 20. Those on chromosomes 3 and 20 are in strong agreement with the results reported here. In addition, novel QTL were found on chromosomes 7, 8, 9, 14, 22 and 24. In a cross-species comparison, we extended the meta-assembly by comparing QTL regions of sheep and cattle, which provided strong evidence for synteny conservation of QTL regions for milk, fat, protein and somatic cell score data between cattle and sheep.

  15. WDM production with intense relativistic electrons

    Science.gov (United States)

    Coleman, Josh; Andrews, Heather; Klasky, Mark; Colgan, James; Burris-Mog, Trevor; Creveling, Dan; Miller, Craig; Welch, Dale; Berninger, Mike

    2016-10-01

    The production of warm dense matter (WDM) through collisional heating with intense relativistic electrons is underway. A 100-ns-long monochromatic bunch of electrons with energies of 19.1-19.8 MeV and currents of 0.2-1.7 kA is used to heat 100- μm-thick foils with Z measuring the equation of state with particle beams and benchmark numerical models. Measurements indicate the formation of a warm dense plasma near the end of the pulse, which is on the order of the beam size. These plasmas expand 5 mm in the first microsecond and slow down to 1018 cm-3. At these densities our plasma is collisionally dominated making it possible to spectrally model the density and temperature in LTE. Preliminary density gradient measurements will also be presented indicating the spatial extent of the solid density cutoff. This work was supported by the National Nuclear Se- curity Administration of the U.S. Department of Energy under Contract No. DE-AC52-06NA25396.

  16. Effect of climatic variables on production and reproduction traits of colored broiler breeder poultry

    Directory of Open Access Journals (Sweden)

    G. D. Nayak

    2015-04-01

    Full Text Available Aim: The present study was conducted to investigate the important climatic variables affecting production and reproduction in a broiler breeder flock. Materials and Methods: The experiment was conducted for a period of 1 year on colored synthetic female line male and female poultry birds. 630 female progeny and 194 male progenies from 69 sires and 552 dams produced in four consecutive hatches at an interval of 10 days were used for the present study. Each of the seven, body weight and reproduction traits were regressed with nine environmental variables. Initially, the data were subjected to hatch effect and sire effect corrections through best linear unbiased estimator (BLUE method and, then, multiple linear regressions of environmental variables on each trait were applied. Result: The overall regression was significant (p<0.01 in all traits except 20 week age body weight of females. The R2 value ranged from 0.12 to 0.90 for the traits. Regression coefficient values (b values for maximum temperature and minimum temperature were significant (p<0.05 on 5th week age body weight of males. Similarly, evaporation and morning relative humidity (RH was significant (p<0.05 for 5th week age body weight of females. Almost all b values were significant (p<0.05 for egg production up to 40 week age. The b values representing rainfall, morning RH, afternoon RH, sunshine hours, and rainy days were significant (p<0.05 on bodyweight at 20 week age. All environmental variables except maximum temperature and minimum temperature were significant (p<0.05 on body weight of females at 20 weeks of age. Age at sexual maturity was regressed significantly (p<0.05 with evaporation, afternoon RH whereas, egg shape index was regressed significantly (p<0.05 with a maximum temperature, evaporation and afternoon RH. Conclusion: The result indicated that various environmental variables play a significant role in production and reproduction of breeder broiler poultry. Controlling

  17. Participatory assessment of potato production constraints and trait preferences in potato cultivar development in Rwanda

    Directory of Open Access Journals (Sweden)

    Jean Baptiste Muhinyuza

    2012-09-01

    Full Text Available Potato (Solanum tuberosum L. is the major food and cash crop in the highland regions of Rwanda. However, farmers are not integrated into the potato breeding process. The objectives of this research were to identify farmers’ key potato production constraints and establish preferred traits in potato cultivar development in Rwanda. A participatory rural appraisal (PRA study was conducted through structured survey involving 144 households and 22 focus groups with 258 participants in Musanze, Gicumbi and Nyamagabe districts. The structured survey used a questionnaire administered to farmers to collect information on importance of potatoes and other main crops. While focus groups discussions used matrix scoring of key production constraints and pair-wise ranking of traits. Potato is the most important food and cash crop, followed by maize, beans and wheat. The dominant potato varieties are Kirundo, Cruza, Mabondo and Victoria. The most important potato production constraints are lack of access to credit, lack of high yielding cultivars, insufficient clean seeds and late blight disease. Variety Mabondo is the most tolerant to late blight, followed by Cruza, Kirundo, Kinigi and Rutuku in all the districts. High yield, disease tolerance and high dry matter content are the most important attributes preferred by farmers. Active farmer participation in early breeding stages is critical for a successful potato breeding programme.

  18. Improving productivity promoting traits in wild and cultivated urd and mung beans

    International Nuclear Information System (INIS)

    Ignacimuthu, S.; Babu, C.R.

    1989-01-01

    Photosynthetic rate, RuBP Carboxylase activity, glycolate oxidase activity, malate dehydrogenase activity, specific leaf weight, harvest index and yield were estimated in the normal and 10 Krad dose treated M 2 plants of Vigna sublobata (wild), V. radiata and V. mungo (cultivars) with the objective of locating and utilizing productivity promoting gene assemblies as well as to understand the role of natural and artificial selections in moulding yield promoting gene combinations. The results suggest that there is higher photosynthetic rate and RuPB Case activity in the 10 Krad treated M 2 plants. There is lesser glycolate oxidase activity and malate dehydrogenase activity. There is also positive correlation among net leaf assimilation rate, RuBP Case activity, SLW, HI and yield. These observations imply that domestication accompanied by directional selection did a lter substantially the productivity traits and productivity promoting gene assemblies. (author). 26 refs., 3 tabs

  19. Adaptive value of phenological traits in stressful environments: predictions based on seed production and laboratory natural selection.

    Directory of Open Access Journals (Sweden)

    Benjamin Brachi

    Full Text Available Phenological traits often show variation within and among natural populations of annual plants. Nevertheless, the adaptive value of post-anthesis traits is seldom tested. In this study, we estimated the adaptive values of pre- and post-anthesis traits in two stressful environments (water stress and interspecific competition, using the selfing annual species Arabidopsis thaliana. By estimating seed production and by performing laboratory natural selection (LNS, we assessed the strength and nature (directional, disruptive and stabilizing of selection acting on phenological traits in A. thaliana under the two tested stress conditions, each with four intensities. Both the type of stress and its intensity affected the strength and nature of selection, as did genetic constraints among phenological traits. Under water stress, both experimental approaches demonstrated directional selection for a shorter life cycle, although bolting time imposes a genetic constraint on the length of the interval between bolting and anthesis. Under interspecific competition, results from the two experimental approaches showed discrepancies. Estimation of seed production predicted directional selection toward early pre-anthesis traits and long post-anthesis periods. In contrast, the LNS approach suggested neutrality for all phenological traits. This study opens questions on adaptation in complex natural environment where many selective pressures act simultaneously.

  20. Effect of Azotobacter croococcum on productive traits and microorganisms in sugar beet rhizosphere

    Directory of Open Access Journals (Sweden)

    Kuzevski Janja

    2011-01-01

    Full Text Available The aim of this study was to determine the effects of three different inoculation methods with selected Azotobacter chroococcum strains on productive and technological traits of sugar beet, as well as on the total number of microorganisms and azotobacter in rhizosphere. The results of this two-year study showed that effectiveness of the tested inoculation methods in increasing root yield and sugar content varies greatly, depending on year and azotobacter strains. Effectiveness of inoculation methods was not largely impacted by year on granulated sugar. Achieved granulated sugar yield was significantly higher by using pre-sowing azotobacter application, than by using seed inoculation. A significantly increased number of microorganisms in sugar beet rhizosphere was determined, not only by using pre-sowing azotobacter application but also by using sugar beet seed inoculation. Pre-sowing azotobacter application and inter-row cultivation both caused an equal increase in the number of these bacteria in sugar beet rhizosphere (42.2% and 46.9%. Use of sugar beet seed inoculation caused an increase of 33.7% in the number of azotobacter. In order to achieve higher effectiveness in applying azotobacter on productive and technological traits of sugar beet, and considering determined interaction between a certain year, an inoculation method and a strain, it is necessary for future research to focus on determining efficiency of these strains when they are in a mixture.

  1. Correlations of visual scores, carcass traits, feed efficiency and retail product yield in Nellore cattle

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Cancian

    2014-02-01

    Full Text Available The growing use of visual scores (VS and ultrasound (US for carcass evaluation in breeding programs, calls for a knowledge of the relationships between these traits and other relevant characteristics, such as feed efficiency and production of commercial cuts. The objective of this study was to evaluate correlations between body visual scores and carcass traits identified by ultrasound (US and feed efficiency (FE, carcass weight (HCW, dressing percentage (DP and retail product yield (RPY in beef cattle. Nellore cattle (male, 42 non-castrated [NCAST] and 44 castrated [CAST] were evaluated by both VS and US, at the postweaning (15-month old and finishing phases (21-month old. Visual scores of conformation (C, precocity (P and muscling (M were assessed and the backfat thickness (UBFT, rump fat thickness (URFT and ribeye area (UREA were measured by ultrasound. Gain-to-feed (G:F ratio and residual feed intake (RFI were measured in feedlot. Hot carcass weight, DP and RPY were determined at harvest. Non-castrated cattle had greater HCW and RPY but lower UBFT and URFT than CAST. Postweaning VS and US were poorly correlated with FE in both sexual conditions. Finishing VS were negatively correlated with G:F in CAST and finishing URFT was negatively correlated with RPY in NCAST. The relationship of VS and US with feed efficiency and meat yield is affected by age at the date of evaluation and by castration. Feed efficiency is not related to the yield of meat cuts in Nellore cattle

  2. Quantitative analysis of production traits in saltwater crocodiles (Crocodylus porosus): II. age at slaughter.

    Science.gov (United States)

    Isberg, S R; Thomson, P C; Nicholas, F W; Barker, S G; Moran, C

    2005-12-01

    Crocodile morphometric (head, snout-vent and total length) measurements were recorded at three stages during the production chain: hatching, inventory [average age (+/-SE) is 265.1 +/- 0.4 days] and slaughter (average age is 1037.8 +/- 0.4 days). Crocodile skins are used for the manufacture of exclusive leather products, with the most common-sized skin sold having 35-45 cm in belly width. One of the breeding objectives for inclusion into a multitrait genetic improvement programme for saltwater crocodiles is the time taken for a juvenile to reach this size or age at slaughter. A multivariate restricted maximum likelihood analysis provided (co)variance components for estimating the first published genetic parameter estimates for these traits. Heritability (+/-SE) estimates for the traits hatchling snout-vent length, inventory head length and age at slaughter were 0.60 (0.15), 0.59 (0.12) and 0.40 (0.10) respectively. There were strong negative genetic (-0.81 +/- 0.08) and phenotypic (-0.82 +/- 0.02) correlations between age at slaughter and inventory head length.

  3. Total Factor Productivity, Demographic Traits and ICT: Empirical Analysis for Asia

    Directory of Open Access Journals (Sweden)

    Bilal MEHMOOD

    2014-01-01

    Full Text Available This paper advances a model to explain the total factor productivity in Asian countries, most of which are labor surplus and are endowed with substantial human capital. Such promising demographic potentials are considered as complementary factors to use of Information and Communication Technology (ICT. Population with such favorable demographic traits and access to ICT results in higher Total factor productivity (TFP. We call this as Demo-Tech-TFP Model and is tested by using data for 2000-2010 of 24 Asian countries. Econometric concerns like presence of endogenous and/or predetermined covariates and small time-series and cross-sectional dimensions of panel dataset are tackled by using System Generalized Method of Moments (SYS-GMM. Results show considerable support for the Demo-Tech-TFP hypothesis. Need is to design such models that suit the local demography and patterns of technological diffusion currently taking place in developing countries.

  4. Characterization, expression profiles, intracellular distribution and association analysis of porcine PNAS-4 gene with production traits

    Directory of Open Access Journals (Sweden)

    Wang Heng

    2008-06-01

    Full Text Available Abstract Background In a previous screen to identify differentially expressed genes associated with embryonic development, the porcine PNAS-4 gene had been found. Considering differentially expressed genes in early stages of muscle development are potential candidate genes to improve meat quality and production efficiency, we determined how porcine PNAS-4 gene regulates meat production. Therefore, this gene has been sequenced, expression analyzed and associated with meat production traits. Results We cloned the full-length cDNA of porcine PNAS-4 gene encoding a protein of 194 amino acids which was expressed in the Golgi complex. This gene was mapped to chromosome 10, q11–16, in a region of conserved synteny with human chromosome 1 where the human homologous gene was localized. Real-time PCR revealed that PNAS-4 mRNA was widely expressed with highest expression levels in skeletal muscle followed by lymph, liver and other tissues, and showed a down-regulated expression pattern during prenatal development while a up-regulated expression pattern after weaning. Association analysis revealed that allele C of SNP A1813C was prevalent in Chinese indigenous breeds whereas A was dominant allele in Landrace and Large White, and the pigs with homozygous CC had a higher fat content than those of the pigs with other genotypes (P Conclusion Porcine PNAS-4 protein tagged with green fluorescent protein accumulated in the Golgi complex, and its mRNA showed a widespread expression across many tissues and organs in pigs. It may be an important factor affecting the meat production efficiency, because its down-regulated expression pattern during early embryogenesis suggests involvement in increase of muscle fiber number. In addition, the SNP A1813C associated with fat traits might be a genetic marker for molecular-assisted selection in animal breeding.

  5. Genetic parameters for lactose and its correlation with other milk production traits and fitness traits in pasture-based production systems.

    Science.gov (United States)

    Haile-Mariam, M; Pryce, J E

    2017-05-01

    Lactose is a major component of milk (typically around 5% of composition) that is not usually directly considered in national genetic improvement programs of dairy cattle. Daily test-day lactose yields and percentage data from pasture-based seasonal calving herds in Australia were analyzed to assess if lactose content can be used for predicting fitness traits and if an additional benefit is achieved by including lactose yield in selecting for milk yield traits. Data on lactose percentage collected from 2007 to 2014, from about 600 herds, were used to estimated genetic parameters for lactose percentage and lactose yield and correlations with other milk yield traits, somatic cell count (SCC), calving interval (CIV), and survival. Daily test-day data were analyzed using bivariate random regression models. In addition, multi-trait models were also performed mainly to assess the value of lactose to predict fitness traits. The heritability of lactose percentage (0.25 to 0.37) was higher than lactose yield (0.11 to 0.20) in the first parity. Genetically, the correlation of lactose percentage with protein percentage varied from 0.3 at the beginning of lactation to -0.24 at the end of the lactation in the first parity. Similar patterns in genetic correlations were also observed in the second and third parity. At all levels (i.e., genetic, permanent environmental, and residual), the correlation between milk yield and lactose yield was close to 1. The genetic and permanent environmental correlations between lactose percentage and SCC were stronger in the second and third parity and toward the end of the lactation (-0.35 to -0.50) when SCC levels are at their maximum. The genetic correlation between lactose percentage in the first 120 d and CIV (-0.23) was similar to correlation of CIV with protein percentage (-0.28), another component trait with the potential to predict fertility. Furthermore, the correlations of estimated breeding values of lactose percentage and estimated

  6. ASSOCIATION BETWEEN FSHR POLYMORPHISM WITH PRODUCTIVE AND REPRODUCTIVE TRAITS IN ANTIOQUIA HOLSTEIN CATTLE

    Directory of Open Access Journals (Sweden)

    Stephania Madrid Gaviria

    2016-01-01

    Full Text Available Because FSH and its receptor play a fundamental role in reproduction, the objective of this research was determining the effect of the A-320T polymorphism in productive and reproductive traits in Antioquia Holstein cows. The PCR-RFLP was used to amplify a segment of 970 bp of the bovine follicle stimulating hormone receptor gene (FSHR which was digested with the restriction enzyme TaqI. The effect of the FSHR genotypes on productive and reproductive traits was determinate by a Mixed Linear Model and Tukey Test was used to establish significant differences between means for the three genotypes. The effect of allelic substitution was studied through a linear regression model where the genotypes AA, AT and TT were transformed into a quantitative scale of 0, 1 and 2, respectively according to the number of possessed T alleles. In Antioquia Holstein cattle the most common genotype was the AT (0.485 followed by TT (0.417 and AA (0.096 genotypes. Allele frequencies were 0.339 for A and 0.660 for T, respectively. The FSHR genotypes did not exert a significant effect on the principal productive parameters, except for fat percentage (P<0.01 where the TT individuals presented the highest percent. Results showed that T allele seems to improve the solids in milk while A allele improves dairy yield. The reproductive parameters were not affected by this SNP but AT animals showed a higher number of services per conception. Further studies are required to determine whether this SNP may be used as a molecular marker

  7. Functional Trait Changes, Productivity Shifts and Vegetation Stability in Mountain Grasslands during a Short-Term Warming.

    Science.gov (United States)

    Debouk, Haifa; de Bello, Francesco; Sebastià, Maria-Teresa

    2015-01-01

    Plant functional traits underlie vegetation responses to environmental changes such as global warming, and consequently influence ecosystem processes. While most of the existing studies focus on the effect of warming only on species diversity and productivity, we further investigated (i) how the structure of community plant functional traits in temperate grasslands respond to experimental warming, and (ii) whether species and functional diversity contribute to a greater stability of grasslands, in terms of vegetation composition and productivity. Intact vegetation turves were extracted from temperate subalpine grassland (highland) in the Eastern Pyrenees and transplanted into a warm continental, experimental site in Lleida, in Western Catalonia (lowland). The impacts of simulated warming on plant production and diversity, functional trait structure, and vegetation compositional stability were assessed. We observed an increase in biomass and a reduction in species and functional diversity under short-term warming. The functional structure of the grassland communities changed significantly, in terms of functional diversity and community-weighted means (CWM) for several traits. Acquisitive and fast-growing species with higher SLA, early flowering, erect growth habit, and rhizomatous strategy became dominant in the lowland. Productivity was significantly positively related to species, and to a lower extent, functional diversity, but productivity and stability after warming were more dependent on trait composition (CWM) than on diversity. The turves with more acquisitive species before warming changed less in composition after warming. Results suggest that (i) the short-term warming can lead to the dominance of acquisitive fast growing species over conservative species, thus reducing species richness, and (ii) the functional traits structure in grassland communities had a greater influence on the productivity and stability of the community under short-term warming

  8. Functional Trait Changes, Productivity Shifts and Vegetation Stability in Mountain Grasslands during a Short-Term Warming.

    Directory of Open Access Journals (Sweden)

    Haifa Debouk

    Full Text Available Plant functional traits underlie vegetation responses to environmental changes such as global warming, and consequently influence ecosystem processes. While most of the existing studies focus on the effect of warming only on species diversity and productivity, we further investigated (i how the structure of community plant functional traits in temperate grasslands respond to experimental warming, and (ii whether species and functional diversity contribute to a greater stability of grasslands, in terms of vegetation composition and productivity. Intact vegetation turves were extracted from temperate subalpine grassland (highland in the Eastern Pyrenees and transplanted into a warm continental, experimental site in Lleida, in Western Catalonia (lowland. The impacts of simulated warming on plant production and diversity, functional trait structure, and vegetation compositional stability were assessed. We observed an increase in biomass and a reduction in species and functional diversity under short-term warming. The functional structure of the grassland communities changed significantly, in terms of functional diversity and community-weighted means (CWM for several traits. Acquisitive and fast-growing species with higher SLA, early flowering, erect growth habit, and rhizomatous strategy became dominant in the lowland. Productivity was significantly positively related to species, and to a lower extent, functional diversity, but productivity and stability after warming were more dependent on trait composition (CWM than on diversity. The turves with more acquisitive species before warming changed less in composition after warming. Results suggest that (i the short-term warming can lead to the dominance of acquisitive fast growing species over conservative species, thus reducing species richness, and (ii the functional traits structure in grassland communities had a greater influence on the productivity and stability of the community under short

  9. Genotypic gain with simultaneous selection of production, nutrition, and culinary traits in cowpea crosses and backcrosses using mixed models.

    Science.gov (United States)

    Oliveira, D G; Rocha, M M; Damasceno-Silva, K J; Sá, F V; Lima, L R L; Resende, M D V

    2017-08-17

    The aim of this study was to estimate the genotypic gain with simultaneous selection of production, nutrition, and culinary traits in cowpea crosses and backcrosses and to compare different selection indexes. Eleven cowpea populations were evaluated in a randomized complete block design with four replications. Fourteen traits were evaluated, and the following parameters were estimated: genotypic variation coefficient, genotypic determination coefficient, experimental quality indicator and selection reliability, estimated genotypic values ​​- BLUE, genotypic correlation coefficient among traits, and genotypic gain with simultaneous selection of all traits. The genotypic gain was estimated based on tree selection indexes: classical, multiplicative, and the sum of ranks. The genotypic variation coefficient was higher than the environmental variation coefficient for the number of days to start flowering, plant type, the weight of one hundred grains, grain index, and protein concentration. The majority of the traits presented genotypic determination coefficient from medium to high magnitude. The identification of increases in the production components is associated with decreases in protein concentration, and the increase in precocity leads to decreases in protein concentration and cooking time. The index based on the sum of ranks was the best alternative for simultaneous selection of traits in the cowpea segregating populations resulting from the crosses and backcrosses evaluated, with emphasis on the F 4 BC 12 , F 4 C 21 , and F 4 C 12 populations, which had the highest genotypic gains.

  10. Joint analysis of longitudinal feed intake and single recorded production traits in pigs using a novel horizontal model

    DEFF Research Database (Denmark)

    Shirali, M.; Strathe, A. B.; Mark, T.

    2017-01-01

    - and first-order Legendre polynomials of age on test, respectively. The fixed effect and random residual variance were estimated for each weekly FI trait. Residual feed intake (RFI) was derived from the conditional distribution of FI given the breeding values of ADG100 and LMP. The heritability of FI varied......A novel Horizontal model is presented for multitrait analysis of longitudinal traits through random regression analysis combined with single recorded traits. Weekly ADFI on test for Danish Duroc, Landrace, and Yorkshire boars were available from the national test station and were collected from 30...... to 100 kg BW. Single recorded production traits of ADG from birth to 30 kg BW (ADG30), ADG from 30 to 100 kg BW (ADG100), and lean meat percentage (LMP) were available from breeding herds or the national test station. The Horizontal model combined random regression analysis of feed intake (FI...

  11. Production and Decay of Excited Electrons at the LHC

    CERN Document Server

    Cakir, O; Mehdiyev, R; Belyaev, A

    2004-01-01

    We study single production of excited electrons at the CERN LHC through contact interactions of fermions. Subsequent decays of excited electrons to ordinary electrons and light fermions via gauge and contact interactions are examined. The mass range accessible with the ATLAS detector is obtained.

  12. Identification of Promising Mutants Associated with Egg Production Traits Revealed by Genome-Wide Association Study.

    Directory of Open Access Journals (Sweden)

    Jingwei Yuan

    Full Text Available Egg number (EN, egg laying rate (LR and age at first egg (AFE are important production traits related to egg production in poultry industry. To better understand the knowledge of genetic architecture of dynamic EN during the whole laying cycle and provide the precise positions of associated variants for EN, LR and AFE, laying records from 21 to 72 weeks of age were collected individually for 1,534 F2 hens produced by reciprocal crosses between White Leghorn and Dongxiang Blue-shelled chicken, and their genotypes were assayed by chicken 600 K Affymetrix high density genotyping arrays. Subsequently, pedigree and SNP-based genetic parameters were estimated and a genome-wide association study (GWAS was conducted on EN, LR and AFE. The heritability estimates were similar between pedigree and SNP-based estimates varying from 0.17 to 0.36. In the GWA analysis, we identified nine genome-wide significant loci associated with EN of the laying periods from 21 to 26 weeks, 27 to 36 weeks and 37 to 72 weeks. Analysis of GTF2A1 and CLSPN suggested that they influenced the function of ovary and uterus, and may be considered as relevant candidates. The identified SNP rs314448799 for accumulative EN from 21 to 40 weeks on chromosome 5 created phenotypic differences of 6.86 eggs between two homozygous genotypes, which could be potentially applied to the molecular breeding for EN selection. Moreover, our finding showed that LR was a moderate polygenic trait. The suggestive significant region on chromosome 16 for AFE suggested the relationship between sex maturity and immune in the current population. The present study comprehensively evaluates the role of genetic variants in the development of egg laying. The findings will be helpful to investigation of causative genes function and future marker-assisted selection and genomic selection in chickens.

  13. Radiation-emitting Electronic Product Codes

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database contains product names and associated information developed by the Center for all products, both medical and non-medical, which emit radiation. It...

  14. Electron beam production by a plasma focus

    International Nuclear Information System (INIS)

    Smith, J.R.; Luo, C.M.; Schneider, R.F.; Rhee, M.J.

    1984-01-01

    Operation of a plasma focus as a Compact Pulsed Accelerator (CPA) for ions has been previously reported. The CPA consists of: (1) a 15 μF, 3 kJ capacitor, (2) a triggered spark gap, (3) a coaxial transmission line, and (4) a Mather geometry plasma gun. Recently the authors have investigated application of the CPA as an accelerator for electrons. In the previously reported work using the standard Mather plasma gun geometry, ions were accelerated away from the plasma gun and were therefore conveniently extracted for analysis, but electrons were directed into the hollow anode where extraction is blocked by the coaxial transmission line. For investigation of accelerated electrons a new plasma gun design which allows extraction of electrons has been developed. Details of the new plasma gun design and further results of beam diagnostics are discussed

  15. Customer Buying Behavior : - Online shopping towards electronic product

    OpenAIRE

    Wang, Dan; Yang, Liuzi

    2010-01-01

    ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

  16. Ion production and trapping in electron rings

    International Nuclear Information System (INIS)

    Gluckstern, R.C.; Ruggiero, A.G.

    1979-08-01

    The electron beam in the VUV and X-ray rings of NSLS will ionize residual gas by collisions. Positive ions will be produced with low velocity, and will be attracted by the electron beam to the beam axis. If they are trapped in stable (transverse) orbits, they may accumulate, thereby increasing the ν/sub x,z/ of the individual electrons. Since the accumulated ions are unlikely to be of uniform density, a spread in ν/sub x,z/ will also occur. Should these effects be serious, it may be necessary to introduce clearing electrodes, although this may increase Z/n in the rings, thereby adding to longitudinal instability problems. The seriousness of the above effect for the VUV and X-ray rings is estimated

  17. Effect of production system (barn and free range) and slaughter age on some production traits of guinea fowl.

    Science.gov (United States)

    Yamak, U S; Sarica, M; Boz, M A; Ucar, A

    2018-01-01

    A total of 200 guinea fowl was reared in either barn or free-range systems and slaughtered at 14, 16, or 18 wk of age in order to determine the effects of production system on live weight, feed consumption, and some carcass and slaughter traits. Production system had a significant effect on live weight until 14 wk of age. Live weights were similar between free-range and indoor production systems at 16 (1,150 g vs. 1,152 g) and 18 (1,196 g vs. 1,203 g) wk of age. Guinea fowl reared in a free-range system consumed more feed (7,693 g vs. 6,983 g), and guinea fowl reared in a barn had better feed conversion ratio (5.80 vs. 6.43) (P free-range system had significantly less abdominal fat (P < 0.05). © 2017 Poultry Science Association Inc.

  18. Genetic variation in meat production related traits in reindeer (Rangifer t. tarandus

    Directory of Open Access Journals (Sweden)

    Kirsi Muuttoranta

    2014-02-01

    Full Text Available Normal 0 21 false false false SV X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normal tabell"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} In reindeer husbandry, animal breeding could offer tools for improving productivity by selection. The traits affecting meat production efficiency are primarily related to calf growth and survival, and to dam’s longevity and lifetime ability to raise heavy calves. Information on genetic (covariation in these traits is scarce but needed in estimating the potential and effectiveness of selection as well as biological constraints. The objectives of the study were to estimate these genetic parameters from the data of an experimental reindeer herd at Kutuharju (Inari, Finland. Heritabilities (h2 and genetic correlations (rg among the average daily gain of calves (ADG, dams’ age at maturity, individual fitness (λind and the cumulative sum of her calves’ weaning weight over seven years (WW7 were studied with AS-Reml software using the dataset from the experimental herd. The pedigree included also sire information to allow the separation of the maternal effects. Direct and maternal heritabilities of ADG were moderate (0.24±0.09 and 0.18±0.05, respectively and the direct-maternal correlation was highly negative (-0.73±0.17. Indeed, selection on growth necessitates information on both calf and dam. The genetic correlation of growth with birth date and birth weight could not be detected with the data. The age

  19. Genetic line comparisons and genetic parameters for endoparasite infections and test-day milk production traits.

    Science.gov (United States)

    May, Katharina; Brügemann, Kerstin; Yin, Tong; Scheper, Carsten; Strube, Christina; König, Sven

    2017-09-01

    Keeping dairy cows in grassland systems relies on detailed analyses of genetic resistance against endoparasite infections, including between- and within-breed genetic evaluations. The objectives of this study were (1) to compare different Black and White dairy cattle selection lines for endoparasite infections and (2) the estimation of genetic (co)variance components for endoparasite and test-day milk production traits within the Black and White cattle population. A total of 2,006 fecal samples were taken during 2 farm visits in summer and autumn 2015 from 1,166 cows kept in 17 small- and medium-scale organic and conventional German grassland farms. Fecal egg counts were determined for gastrointestinal nematodes (FEC-GIN) and flukes (FEC-FLU), and fecal larvae counts for the bovine lungworm Dictyocaulus viviparus (FLC-DV). The lowest values for gastrointestinal nematode infections were identified for genetic lines adopted to pasture-based production systems, especially selection lines from New Zealand. Heritabilities were low for FEC-GIN (0.05-0.06 ± 0.04) and FLC-DV (0.05 ± 0.04), but moderate for FEC-FLU (0.33 ± 0.06). Almost identical heritabilities were estimated for different endoparasite trait transformations (log-transformation, square root). The genetic correlation between FEC-GIN and FLC-DV was 1.00 ± 0.60, slightly negative between FEC-GIN and FEC-FLU (-0.10 ± 0.27), and close to zero between FLC-DV and FEC-FLU (0.03 ± 0.30). Random regression test-day models on a continuous time scale [days in milk (DIM)] were applied to estimate genetic relationships between endoparasite and longitudinal test-day production traits. Genetic correlations were negative between FEC-GIN and milk yield (MY) until DIM 85, and between FEC-FLU and MY until DIM 215. Genetic correlations between FLC-DV and MY were negative throughout lactation, indicating improved disease resistance for high-productivity cows. Genetic relationships between FEC-GIN and FEC-FLU with milk

  20. Associations Between Personality Traits and Adherence to Antidepressants Assessed Through Self-Report, Electronic Monitoring, and Pharmacy Dispensing Data: A Pilot Study.

    Science.gov (United States)

    Wouters, Hans; Amin, Darya F H; Taxis, Katja; Heerdink, Eibert R; Egberts, Antoine C G; Gardarsdottir, Helga

    2016-10-01

    Treatment with antidepressants is often compromised by substantial nonadherence. To understand nonadherence, specific medication-related behaviors and beliefs have been studied, but less is known about broader and temporally stable personality "traits." Furthermore, adherence has often been assessed by a single method. Hence, we investigated associations between the Big Five personality traits and adherence assessed by self-report, electronic drug use monitoring, and dispensing data. Using the Big Five Inventory, we assessed the personality traits "openness," "conscientiousness," "extraversion," "agreeableness," and "neuroticism" of patients treated with antidepressants who were invited through community pharmacies. Self-reported adherence was assessed with the Medication Adherence Rating Scale (score >24), electronic monitoring with medication event monitoring system (MEMS) devices (therapy days missed ≤ 10% and personality traits, the third and fourth quartiles of "conscientiousness" were associated with better self-reported adherence (odds ratio, 3.63; 95% confidence interval, 1.34-9.86 and odds ratio, 2.97; 95% confidence interval, 1.09-8.08; P ≤ 0.05). No relationships were found between personality traits and adherence assessed through electronic drug use monitoring or dispensing data. We therefore conclude that adherence to antidepressant therapy seems to be largely unrelated to personality traits.

  1. Influence of combinations of fenugreek, garlic, and black pepper powder on production traits of the broilers

    Directory of Open Access Journals (Sweden)

    A. Kirubakaran

    2016-05-01

    Full Text Available Aim: To study the effects of combinations of fenugreek (Trigonella foenum-graecum L., garlic (Allium sativum, and black pepper (Piper nigrum powder supplementation on production traits of broiler chickens. Materials and Methods: A total of 288 commercial broiler chicks were randomly assigned to 1-9 groups with 4 replicates each. An experiment was conducted in broilers with different feed formulations; control feed, with no added fenugreek, garlic, and black pepper powder; and 8 treatment groups receiving feed supplemented with different combinations of fenugreek, garlic, and black pepper powder. The individual broilers’ body weight and feed consumption were recorded and calculate the body weight gain and feed conversion ratio (FCR. Results: Broiler’s weight gain and FCR were significantly higher in groups receiving feed supplemented with garlic and black pepper powder combinations (p<0.01. Cumulative feed consumption was significantly higher in groups receiving feed supplemented with garlic and black pepper powder combinations (p<0.01. Conclusion: The combination of garlic and black pepper powder supplemented broiler feed fed groups showed higher production performance. The 5 g/kg garlic powder+1 g/kg black pepper powder and 10 g/kg garlic powder+2 g/kg black pepper powder significantly improved the weight gain and FCR.

  2. Influence of combinations of fenugreek, garlic, and black pepper powder on production traits of the broilers

    Science.gov (United States)

    Kirubakaran, A.; Moorthy, M.; Chitra, R.; Prabakar, G.

    2016-01-01

    Aim: To study the effects of combinations of fenugreek (Trigonella foenum-graecum L.), garlic (Allium sativum), and black pepper (Piper nigrum) powder supplementation on production traits of broiler chickens. Materials and Methods: A total of 288 commercial broiler chicks were randomly assigned to 1-9 groups with 4 replicates each. An experiment was conducted in broilers with different feed formulations; control feed, with no added fenugreek, garlic, and black pepper powder; and 8 treatment groups receiving feed supplemented with different combinations of fenugreek, garlic, and black pepper powder. The individual broilers’ body weight and feed consumption were recorded and calculate the body weight gain and feed conversion ratio (FCR). Results: Broiler’s weight gain and FCR were significantly higher in groups receiving feed supplemented with garlic and black pepper powder combinations (ppepper powder combinations (ppepper powder supplemented broiler feed fed groups showed higher production performance. The 5 g/kg garlic powder+1 g/kg black pepper powder and 10 g/kg garlic powder+2 g/kg black pepper powder significantly improved the weight gain and FCR. PMID:27284222

  3. Economic values for milk production and quality traits in south and southeast regions of Brazil

    Directory of Open Access Journals (Sweden)

    Vera Lucia Cardoso

    2014-12-01

    Full Text Available The objective of this study was to calculate economic values for milk (MY, protein (PY and fat productions (FY and somatic cell count (SCC which could be used to compose an economic index to rank animals involved in an international genetic evaluation program of Holstein cattle used in the commercial dairy population in Brazil. The main milk production systems (MPS prevailing in the South and Southeast were defined based on the feeding management and production level of herds. To calculate feeding costs, energy requirements for the production of one kg of milk with the respective average protein and fat contents of each MPS were calculated. Feeding costs were obtained based on the regional prices of the diets' components. To calculate revenues, milk prices were obtained from the payment tables practiced by seven milk industries. Economic values were calculated from the marginal differences between revenues and costs, for the interest of maximizing the profit, assuming a fixed number of animals in the herd. The average economic values (R$ for MY, PY and FY were 0.51, 6.41 and 1.94, respectively. The economic impact of increasing the original SCC values in the individual records of cows in the population by 1% was -R$ 1.40 per cow, per year. Due to changes observed in the last years in the milk market in Brazil, selection for milk components became economically advantageous. As a result, the calculation of economic values and the proposition of an economic index based on these traits became feasible. Somatic cell count does have an economic impact on the final price of milk and consequently on the annual profit of herds. It has also been used in breeding programs as an indicator of mastitis resistance and should not be neglected in breeding programs of dairy cattle.

  4. Phenotypic relationships among methane production traits assessed under ad libitum feeding of beef cattle.

    Science.gov (United States)

    Bird-Gardiner, T; Arthur, P F; Barchia, I M; Donoghue, K A; Herd, R M

    2017-10-01

    Angus cattle from 2 beef cattle projects in which daily methane production (MPR) was measured were used in this study to examine the nature of the relationships among BW, DMI, and methane traits of beef cattle fed ad libitum on a roughage diet or a grain-based feedlot diet. In both projects methane was measured using the GreenFeed Emission Monitoring system, which provides multiple short-term breath measures of methane production. The data used for this study were from 119 Angus heifers over 15 d on a roughage diet and 326 Angus steers over 70 d on a feedlot diet. Mean (±SD) age, BW, and DMI were 372 ± 28 d, 355 ± 37 kg, and 8.1 ± 1.3 kg/d for the heifers and 554 ± 86 d, 577 ± 69 kg, and 13.3 ± 2.0 kg/d for the steers, respectively. The corresponding mean MPR was 212 g/d for heifers and 203 g/d for steers. Additional traits studied included methane yield (MY; MPR/DMI), methane intensity (MPR/BW), and 3 forms of residual methane production (RMP), which is a measure of actual minus predicted MPR. For RMP, RMP, and RMP predicted MPR were obtained by regression of MPR on BW, on DMI, and on both DMI and BW, respectively. The 2 data sets were analyzed separately using the same statistical procedures. For both feed types the relationships between MPR and DMI and between MPR and BW were both positive and linear. The correlation between MPR and DMI was similar to that between MPR and BW, although the correlations were stronger for the roughage diet ( = 0.75 for MPR vs. DMI; = 0.74 for MPR vs. BW) than the grain-based diet ( = 0.62 for MPR vs. DMI; = 0.66 for MPR vs. BW). The correlation between MY and DMI was negative and moderate for the roughage ( = -0.68) and grain-based ( = -0.59) diets, a finding that is different from the nonsignificant correlations reported in studies of cattle on a restricted roughage diet. The 3 RMP traits were strongly correlated ( values from 0.76 to 0.99) with each other for both the roughage and the grain-based diets, which indicates

  5. Binary encounter electron production in ion-atom collisions

    International Nuclear Information System (INIS)

    Grabbe, S.; Bhalla, C.P.; Shingal, R.

    1993-01-01

    The binary encounter electrons are produced by hard collisions between the target electrons and the energetic projectiles. Richard et al. found the measured double differential cross section for BEe production at zero degree laboratory scattering angle, in collisions of F q+ with H 2 and He targets, to increase as the charge state of the projectile was decreased. The binary encounter electron production has recently been a subject of detailed investigations. We have calculated the differential elastic scattering cross sections of electrons from several ions incorporating the exchange contribution of the continuum and the bound orbitals in addition to the static potential. The double differential binary encounter electron production cross sections are presented using the impulse approximation

  6. Breakeven prices for recording of indicator traits to reduce the environmental impact of milk production

    DEFF Research Database (Denmark)

    Axelsson, Helen Hansen; Thomasen, Jørn Rind; Sørensen, Anders Christian

    2015-01-01

    A breeding scheme using genomic selection and an indicator trait for environmental impact (EI) was studied to find the most effective recording strategy in terms of annual monetary genetic gain and breakeven price for the recording of indicator traits. The breakeven price shows the investment space......) or small scale (residual feed intake and total enteric methane measured in a respiration chamber). In the scenario with stayability, the genetic gain in EI was over 11% higher than it was in NoIT. The breakeven price of recording stayability was €8 per record. Stayability is easy to record in the national...... of the cow was used as indicator trait. The breakeven price for this indicator trait was €29 per record in the reference population. Ideally the recording of a specific indicator trait for EI would take place when: (i) the genetic correlation between the IT and EI is high; and (ii) the number of phenotypic...

  7. Exchange Standards for Electronic Product Data

    Science.gov (United States)

    1988-10-01

    Implementation Stds Product Definition Stds Graphics Stds j- Image Archival Stds 3 VDMNAPLPS GKS Manipulation I Core PHIGS VDI Textual Stds [ - Simple...Douglas Astronautics 5301 Bolsa Avenue Huntington Beach, CA 92647- 2048 Mr. Siegfried Goldstein Siegfried Enterprises, Inc. P. 0. Box 2308 North

  8. Modeling the Effects of Trait Diversity on Short-term Adaptive Capacity and Long-term Productivity of Phytoplankton Communities

    Science.gov (United States)

    Smith, S. L.; Vallina, S. M.; Merico, A.

    2016-02-01

    We examine Biodiversity and Ecosystem Function (BEF) in a model phytoplankton community, using two recently developed mechanisms for sustaining diversity. The Trait Diffusion (TD) formulation represents the maintenance of diversity via endogenous mechanisms, such as inter-generational trait plasticity and rapid evolution. The 'Kill-the-Winner' (KTW) formulation for grazing sustains prey biodiversity via the exogenous mechanism of active prey switching. We implement both TD and KTW in a continuous trait-distribution model using simplified size-scalings to define a gleaner-opportunist trade-off for a phytoplankton community. By simulating semi-continuous culture experiments with periodic external dilutions, we test the dynamic response of the phytoplankton community to different scenarios of pulsed nutrient supply. We quantify the short-term Adaptive Capacity (AC) of the community by the specific growth rate averaged over the first 3 days of perturbations, and the Long-term Productivity (LP) by its average over the entire 120 day period of perturbations. When either the frequency or intensity of pulses is low, both AC and LP tend to decrease with diversity (and vice versa). Trait diversity has more impact on AC, particularly for pulses of high frequency or intensity, for which it tends to increase gradually at first, then steeply, and then to saturate with increasing diversity. For pulses of moderate intensity and frequency, increasing trait diversity from low to moderate levels leads to a trade-off between enhancing AC while slightly decreasing LP. Ultimately, we find that sustaining diversity increases the speed at which the phytoplankton community changes its composition in terms of size and hence nutrient acquisition traits, which may have implications for the transfer of productivity through the foodweb.

  9. Measures of methane production and their phenotypic relationships with dry matter intake, growth, and body composition traits in beef cattle.

    Science.gov (United States)

    Herd, R M; Arthur, P F; Donoghue, K A; Bird, S H; Bird-Gardiner, T; Hegarty, R S

    2014-11-01

    Ruminants contribute up to 80% of greenhouse gas (GHG) emissions from livestock, and enteric methane production by ruminants is the main source of these GHG emissions. Hence, reducing enteric methane production is essential in any GHG emissions reduction strategy in livestock. Data from 2 performance-recording research herds of Angus cattle were used to evaluate a number of methane measures that target methane production (MPR) independent of feed intake and to examine their phenotypic relationships with growth and body composition. The data comprised 777 young bulls and heifers that were fed a roughage diet (ME of 9 MJ/kg DM) at 1.2 times their maintenance energy requirements and measured for MP in open circuit respiration chambers for 48 h. Methane traits evaluated included DMI during the methane measurement period, MPR, and methane yield (MY; MPR/DMI), with means (± SD) of 6.2 ± 1.4 kg/d, 187 ± 38 L/d, and 30.4 ± 3.5 L/kg, respectively. Four forms of residual MPR (RMP), which is a measure of actual minus predicted MPR, were evaluated. For the first 3 forms, predicted MPR was calculated using published equations. For the fourth (RMPR), predicted MPR was obtained by regression of MPR on DMI. Growth traits evaluated were BW at birth, weaning (200 d of age), yearling age (400 d of age), and 600 d of age, with means (± SD) of 34 ± 4.6, 238 ± 37, 357 ± 45, and 471 ± 53 kg, respectively. Body composition traits included ultrasound measures (600 d of age) of rib fat, rump fat, and eye muscle area, with means (± SD) of 3.8 ± 2.6 mm, 5.4 ± 3.8 mm, and 61 ± 7.7 cm(2), respectively. Methane production was positively correlated (r ± SE) with DMI (0.65 ± 0.02), MY (0.72 ± 0.02), the RMP traits (r from 0.65 to 0.79), the growth traits (r from 0.19 to 0.57), and the body composition traits (r from 0.13 to 0.29). Methane yield was, however, not correlated (r ± SE) with DMI (-0.02 ± 0.04) as well as the growth (r from -0.03 to 0.11) and body composition (r from 0

  10. Production of slow-positron beams with an electron linac

    International Nuclear Information System (INIS)

    Howell, R.H.; Alvarez, R.A.; Stanek, M.

    1982-01-01

    Intense, pulsed beams of low-energy positrons have been produced by a high-energy beam from an electron linac. The production efficiency for low-energy positrons has been determined for electrons with 60 to 120 MeV energy, low-energy positron beams from a linac can be of much higher intensity than those beams currently derived from radioactive sources

  11. Genetic correlations between mature cow weight and productive and reproductive traits in Nellore cattle.

    Science.gov (United States)

    Regatieri, I C; Boligon, A A; Baldi, F; Albuquerque, L G

    2012-08-29

    We investigated genetic associations between mature cow weight (MW) and weaning weight (WW), yearling weight (YW), weight gain from birth to weaning (GBW), weight gain from weaning to yearling (GWY), weaning hip height (WHH), yearling hip height (YHH), scrotal circumference (SC), and age at first calving (AFC). Data from 127,104 Nellore animals born between 1993 and 2006, belonging to Agropecuária Jacarezinho Ltda., were analyzed. (Co)variance components were obtained by the restricted maximum likelihood method, applying an animal model in a multi-traits analysis. The model included direct genetic and residual effects as random effects, the fixed effects of contemporary group, and the linear and quadratic effects of animal age at recording (except for AFC, GBW, and GWY) and age of cow at calving as covariates (except for MW). The numbers of days from birth to weaning and from weaning to yearling were included as covariates for GBW and GWY, respectively. Estimated direct heritabilities were 0.43 ± 0.02 (MW), 0.33 ± 0.01 (WW), 0.36 ± 0.01 (YW), 0.28 ± 0.02 (GBW), 0.31 ± 0.01 (GWY), 0.44 ± 0.02 (WHH), 0.48 ± 0.02 (YHH), 0.44 ± 0.01 (SC), and 0.16 ± 0.03 (AFC). Genetic correlations between MW and productive traits were positive and of medium to high magnitude (ranging from 0.47 ± 0.03 to 0.71 ± 0.01). A positive and low genetic correlation was observed between MW and SC (0.24 ± 0.04). A negative genetic correlation (-0.19 ± 0.03) was estimated between MW and AFC. Selection to increase weight or weight gains at any age, as well as hip height, will change MW in the same direction. Selection for higher SC may lead to a long-term increase in MW. The AFC can be included in selection indices to improve the reproductive performance of beef cattle without significant changes in MW.

  12. Net ecosystem production in a Little Ice Age moraine: the role of plant functional traits

    Science.gov (United States)

    Varolo, E.; Zanotelli, D.; Tagliavini, M.; Zerbe, S.; Montagnani, L.

    2015-07-01

    Current glacier retreat allows vast mountain ranges available for vegetation establishment and growth. Little is known about the effective carbon (C) budget of these new ecosystems and how the presence of different vegetation communities, characterized by their specific physiology and life forms influences C fluxes. In this study, using a comparative analysis of the C fluxes of two contrasting vegetation types, we intend to evaluate if the different physiologies of the main species have an effect on Ecosystem Respiration (Reco), Gross Primary Production (GPP), annual cumulated Net Ecosystem Exchange (NEE), and long-term carbon accumulation in soil. The NEE of two plant communities present on a Little Ice Age moraine in the Matsch glacier forefield (Alps, Italy) was measured over two growing seasons. They are a typical C3 grassland, dominated by Festuca halleri All. and a community dominated by CAM rosettes Sempervivum montanum L. on rocky soils. Using transparent and opaque chambers, we extrapolated the ecophysiological responses to the main environmental drivers and performed the partition of NEE into Reco and GPP. Soil samples were collected from the same site to measure long-term C accumulation in the ecosystem. The two communities showed contrasting GPP but similar Reco patterns and as a result significantly different in NEE. The grassland acted mainly as a carbon sink with a total cumulated value of -46.4 ± 35.5 g C m-2 NEE while the plots dominated by the CAM rosettes acted as a source with 31.9 ± 22.4 g C m-2. In spite of the NEE being different in the two plant communities, soil analysis did not reveal significant differences in carbon accumulation. Grasslands showed 1.76 ± 0.12 kg C m-2, while CAM rosettes showed 2.06 ± 0.23 kg C m-2. This study demonstrates that carbon dynamics of two vegetation communities can be distinct even though the growing environment is similar. The physiological traits of the dominant species determine large differences in

  13. Effects of electron beam radiation on trait mutation in azuki bean ...

    African Journals Online (AJOL)

    Dry seeds of azuki bean (Vigna angularisi), Jingnong 6 and Hebei 801 varieties were irradiated by electron beam of 100, 300, 600, 700 and 900 Gy, respectively. Mutations of leaf shape and color, seed size and shape, trailing, more branching, dwarfing, early or late flowering time and high yield were created in M2 and M3 ...

  14. Importance of health and environment as quality traits in the buying decision of organic products

    OpenAIRE

    Mondelaers, Koen; Verbeke, Wim; Van Huylenbroeck, Guido

    2009-01-01

    Purpose - This paper aims to explore consumer preference for fresh vegetables labelled as organic in combination with health and environment related quality traits. The study decomposes organic farming into its main quality aspects and measures consumers' preference structure for organic, in general, and for specific organic quality traits in particular. Design/methodology/approach - By means of stated choice preference modelling, the following hypotheses are tested: consumers prefer healt...

  15. Association study of molecular polymorphisms in candidate genes related to stress responses with production and meat quality traits in pigs.

    Science.gov (United States)

    Terenina, E; Babigumira, B M; Le Mignon, G; Bazovkina, D; Rousseau, S; Salin, F; Bendixen, C; Mormede, P

    2013-02-01

    The hypothalamic-pituitary-adrenal (HPA) axis exerts a large range of effects on metabolism, the immune system, inflammatory processes, and brain functions. Together with the sympathetic nervous system, it is also the most important stress-responsive neuroendocrine system. Both systems influence production traits, carcass composition, and meat quality. The HPA axis may be a critical target for genetic selection of more robust animals. Indeed, numerous studies in various species have demonstrated the importance of genetic factors in shaping the individual HPA axis phenotype, and genetic polymorphism can be found at each level of the axis, including hormone production by the adrenal cortices under stimulation by adrenocorticotropic hormone (ACTH), hormone bioavailability, or receptor and postreceptor mechanisms. The aim of the present experiment was to extend these findings to the brain neurochemical systems involved in stress responses. To this end, a number of candidate genes were sequenced for molecular polymorphisms and their association was studied with stress neuroendocrine and production traits in a genetically diverse population consisting of 100 female pigs from an advanced intercross (F10-F12) between 2 highly divergent breeds, Large White (LW) and Meishan (MS). The LW breed has a high production potential for lean meat and a low HPA axis activity, and the MS breed has low growth rate, fat carcasses-but large litters of highly viable piglets-and a high HPA axis activity. Candidate genes were chosen in the catecholaminergic and serotonergic pathways, in the pituitary control of cortisol production, among genes previously demonstrated to be differentially expressed in ACTH-stimulated adrenal glands from LW and MS pigs, and in cortisol receptors. Sixty new polymorphisms were found. The association study with carcass and meat quality traits and with endocrine traits showed a number of significant results, such as monoamine oxidase (MAOA) polymorphisms with

  16. End-of-life resource recovery from emerging electronic products

    DEFF Research Database (Denmark)

    Parajuly, Keshav; Habib, Komal; Cimpan, Ciprian

    2016-01-01

    Integrating product design with appropriate end-of-life (EoL) processing is widely recognized to have huge potentials in improving resource recovery from electronic products. In this study, we investigate both the product characteristics and EoL processing of robotic vacuum cleaner (RVC), as a case...... of emerging electronic product, in order to understand the recovery fate of different materials and its linkage to product design. Ten different brands of RVC were dismantled and their material composition and design profiles were studied. Another 125 RVCs (349 kg) were used for an experimental trial...... at a conventional ‘shred-and-separate’ type preprocessing plant in Denmark. A detailed material flow analysis was performed throughout the recycling chain. The results show a mismatch between product design and EoL processing, and the lack of practical implementation of ‘Design for EoL’ thinking. In the best...

  17. Modeling coupled nitrogen and water use strategies of plant productivity through hydraulic traits

    Science.gov (United States)

    Mackay, D. S.; Savoy, P.; Pleban, J. R.; Tai, X.; Ewers, B. E.; Sperry, J.; Weinig, C.

    2016-12-01

    Changes in heat, nutrient, and drought stresses create novel environments that threaten the health of forests and viability of crop production. Here a trait-based conceptual model finds tradeoffs in maximum hydraulic conductance (Kmax), root to leaf area ratio (RLA) and vulnerability to cavitation (VC) based on the energy costs of acquiring water and nitrogen (N) to support gross primary production (GPP). The atmosphere supplies carbon to and demands water from plants via their stomata. The demand for water increases at higher temperatures due to increased vapor pressure deficits. The lost water is replenished by a passive wicking process that pulls water and N from the soil into roots and up water-filled xylem tubes. When water is in short supply the cost of getting it is high as measured by a decline in K and stomatal closure. Soil N dynamics also influence plant water use. When N is abundant, plants grow low VC fine roots with lower specific root length (m g-1), low Kmax, and maintain a relatively low RLA. In low N environments, N is costly and fine roots gain efficiency by building less robust (or higher VC) xylem with higher Kmax and higher RLA. What happens when the cost of acquiring water changes from high to low under low and high N costs? We incorporated the conceptual model into TREES, which couples whole plant hydraulics to carbon allocation, root-rhizosphere expansion/contraction and, also new for this study, a rhizosphere-root centric microbe-plant N dynamics. We used two experimental studies (drought, N) and two drought-prone fluxnet sites to test the conceptual model at individual plant and regional scales, respectively, and with frequent short versus infrequent long dry periods. When water was not limiting the hydraulic tradeoffs suppressed differences in GPP between the N use strategies. When water was in short supply, however, low RLA&VC plants dropped GPP early during drought because of low Kmax. Since these plants had low VC roots they also

  18. Genome-wide association study of production and stability traits in barley cultivated under future climate scenarios

    DEFF Research Database (Denmark)

    Ingvordsen, Cathrine Heinz; Backes, Gunter; Lyngkjær, Michael Foged

    2015-01-01

    Future barley cultivars will have to produce under the constraints of higher temperature in combination with increased concentrations of atmospheric carbon dioxide and ozone as a consequence of climate change. A diverse set of 167 spring barley genotypes was cultivated under elevated levels...... to identify markers for increased primary production under climate change conditions and reveal possible genes of interest. Phenotyped traits included grain yield, number of grains, number of ears per plant, aboveground vegetative biomass, harvest index and stability of the production parameters over the five...... applied treatments. The GWAS encompassed 7864 SNP markers (Illumina iselect), a compressed mixed linear model with the GAPIT package, and conservative validation of markers. A total of 60 marker-trait associations [−log10(P value) 2.97–5.58] were identified, e.g. grain yield under elevated temperature...

  19. Effect of selection for productive traits in broiler maternal lines on embryo development

    Directory of Open Access Journals (Sweden)

    Schmidt GS

    2003-01-01

    Full Text Available This study used 300 females and 30 males with 36 weeks of age from the selected PP and control PPc maternal broiler lines. PP has been selected for heavy body weight (PC and high egg production for eight generations. Fertile eggs were collected and weighed individually for 4 periods of 5 consecutive days at two-week intervals. In each period, a total of 960 eggs/line were identified and separated in groups of 240 eggs, and stored for later incubation. Embryo weight (PE was evaluated at 9 (P9, 11 (P11, 13 (P13, 15 (P15, 17 (P17 and 21 (P21 days of incubation. The objective was to estimate the effect of selection on embryo development. Egg weight (PO was similar between the two lines. The differences in PE were significant from P15 on, resulting in 1.9g of difference in the chick weight, indicating correlated genetic changes in the embryo development, which can be credited to the selection for PC. Changes in PE while PO was kept unaltered modified the correlations between these two traits. Differences were significant from P13 on and estimated correlations for P21 were 0.72 and 0.70 for PP and PPc, respectively. Chick weight corresponded to 70.91% (PP and 68.48% (PPc of egg weight. The estimated increase in P21 that resulted from the increase of 1.0g in PO was 0.71 in PP and 0.68g in PPc.

  20. Genetic gain and economic values of selection strategies including semen traits in three- and four-way crossbreeding systems for swine production.

    Science.gov (United States)

    González-Peña, D; Knox, R V; MacNeil, M D; Rodriguez-Zas, S L

    2015-03-01

    Four semen traits: volume (VOL), concentration (CON), progressive motility of spermatozoa (MOT), and abnormal spermatozoa (ABN) provide complementary information on boar fertility. Assessment of the impact of selection for semen traits is hindered by limited information on economic parameters. Objectives of this study were to estimate economic values for semen traits and to evaluate the genetic gain when these traits are incorporated into traditional selection strategies in a 3-tier system of swine production. Three-way (maternal nucleus lines A and B and paternal nucleus line C) and 4-way (additional paternal nucleus line D) crossbreeding schemes were compared. A novel population structure that accommodated selection for semen traits was developed. Three selection strategies were simulated. Selection Strategy I (baseline) encompassed selection for maternal traits: number of pigs born alive (NBA), litter birth weight (LBW), adjusted 21-d litter weight (A21), and number of pigs at 21 d (N21); and paternal traits: number of days to 113.5 kg (D113), backfat (BF), ADG, feed efficiency (FE), and carcass lean % (LEAN). Selection Strategy II included Strategy I and the number of usable semen doses per collection (DOSES), a function of the 4 semen traits. Selection Strategy III included Strategy I and the 4 semen traits individually. The estimated economic values of VOL, CON, MOT, ABN, and DOSES for 7 to 1 collections/wk ranged from $0.21 to $1.44/mL, $0.12 to $0.83/10 spermatozoa/mm, $0.61 to $12.66/%, -$0.53 to -$10.88/%, and $2.01 to $41.43/%, respectively. The decrease in the relative economic values of semen traits and DOSES with higher number of collections per wk was sharper between 1 and 2.33 collections/wk than between 2.33 and 7 collections/wk. The higher economic value of MOT and ABN relative to VOL and CON could be linked to the genetic variances and covariances of these traits. Average genetic gains for the maternal traits were comparable across strategies

  1. Evaluation of the Cross-Cultural Traits Influence on the Behavior of Russian and Chinese Students on the Higher Education Products Market

    Science.gov (United States)

    Romanova, Irina M.; Noskova, Elena V.; Trotsenko, Anastasiya N.

    2016-01-01

    Development of academic mobility of students from different countries requires evaluating the influence of their cultural traits on the behavior on the educational products market. The subject of present study is the development of methodic approach towards evaluating the cross-cultural traits influence on students' behavior on the higher…

  2. Comparative study on production, reproduction and functional traits between Fleckvieh and Braunvieh cattle

    Directory of Open Access Journals (Sweden)

    Ludovic-Toma Cziszter

    2017-05-01

    Full Text Available Objective Aim of the current comparative study was to evaluate production outputs, reproduction efficiency and functional traits in dual-purpose Fleckvieh and Braunvieh cows, reared under temperate European conditions. Methods A data-set from 414 Fleckvieh and 42 Braunvieh cows and 799 lactations was analysed. ID tag number, milk yield per milking session, number of steps/interval and milk conductivity were recorded and collected daily using AfiMilk 3.076 A-DU software (Afimilk Ltd., Kibbutz, Israel. Production and milk quality data were taken from the results of the official performance recordings and the reproductive outputs of cows were recorded by the research stations veterinarians. Comparisons between the two genotypes were carried out using the one way analysis of variance protocol, with categorical factor being considered the breed of cows. All the statistical inferences were carried out using Statistica software (StatSoft Inc., Tulsa, OK, USA. Results Fleckvieh cows significantly outperformed (p≤0.05 the Braunvieh herd, with average milk yields of 5,252.1±35.79 kg and 4,897.6±128.94 kg, respectively. Age at first calving was significantly (p≤0.01 influenced by the breed, with Fleckvieh heifers being more precocious (32.8±0.29 mo compared to those of Braunvieh breed (35.7±0.84 mo. Reproduction efficiency as defined by the number of inseminations per gestation, calving interval, dystocia, days dry and days open, was not influenced by genotype (p>0.05. Incidences of sub-clinical mastitis, clinical mastitis, lameness and abortions were not influenced by the breed factor (p>0.05. Stayability of cows was significantly (p≤0.001 influenced by genotype, with Braunvieh cows having an average age at culling of 117.88±11.78 months compared to 90.88±2.89 months in Fleckvieh. Conclusion Overall, results have shown that genotype significantly influenced milk yield, age at first calving and longevity.

  3. Fish production and some traits of meat quality in rainbow trout (Oncorhynchus mykiss farmed in different production systems

    Directory of Open Access Journals (Sweden)

    St. Stoyanova

    2016-12-01

    Full Text Available Abstract. The rainbow trout (Oncorhynchus mykiss, an important species in Bulgarian aquaculture, is farmed in different production systems as raceways, net cages etc. The aim of the present study was to evaluate the effect of two different rearing systems on fish production, survival rate, meat chemical, mineral composition and farming economic efficiency of culticated rainbow trout (Oncorhynchus mykiss. The information from a survey on fish production and economic efficiency traits was collected from two national rainbow trout farms using the two commonest fish farming systems: in raceways, Happy Fish Ltd fish farm and in net cages, Forest Group Ltd fish farm. The average individual weight gain (g, total weight gain (kg, feed conversion ratio, production costs of 1 kg fish and the economic efficiency coefficients were determined for the two studied fish farms. The final live weight of rainbow trout in net cages was 0.30 kg vs 0.35 kg in raceways. The average individual weight gain was higher in raceways farming system (0.30 kg than in net cages farm (0.26 kg. The mortality rate of fish in raceways was considerably lower: only 1% as compared to that in net cages (4%. The feed conversion ratio at the end of the experiment showed identical values for trout in both farms 1.01. The meat water content of fish reared in raceways and net cages was 77.46±0.65% and 74.52±0.52% respectively (P≤0.01.The protein content of fish meat was higher in fish farmed in net cages 18.84±0.29% as compared to fish cultivated in raceways 17.60±0.49% (P 0.05. Meat fat content of rainbow trout, reared in the net cage system was also considerably higher (5.26±0.30% than the respective parameter in fish farmed in ponds (3.60±0.15% (P≤0.001. The content of Ca and P was higher in rainbow trouts reared in raceways (138.96±1.12 mg.kg and 2844.32±39.31 mg.kg 1 -1 -1 compared with the values of these parameters of fish in net cages (134.46±1.96 mg.kg and 2690.31±42

  4. First high-temperature electronics products survey 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Normann, Randy Allen

    2006-04-01

    On April 4-5, 2005, a High-Temperature Electronics Products Workshop was held. This workshop engaged a number of governmental and private industry organizations sharing a common interest in the development of commercially available, high-temperature electronics. One of the outcomes of this meeting was an agreement to conduct an industry survey of high-temperature applications. This report covers the basic results of this survey.

  5. Genetic Relationship between Culling, Milk Production, Fertility, and Health Traits in Norwegian Red Cows

    DEFF Research Database (Denmark)

    Holtsmark, M; Heringstad, B; Madsen, P

    2008-01-01

    First-lactation records on 836,452 daughters of 3,064 Norwegian Red sires were used to examine associations between culling in first lactation and 305-d protein yield, susceptibility to clinical mastitis, lactation mean somatic cell score (SCS), nonreturn rate within 56 d in heifers and primiparous......, including functional traits such as health and fertility, most of the genetic variation in culling will probably be covered by other traits in the breeding goal. However, in populations where data on health and fertility is scarce or not available at all, selection against early culling may be useful...... cows, and interval from calving to first insemination. A Bayesian multivariate threshold-linear model was used for analysis. Posterior mean of heritability of liability to culling of primiparous cows was 0.04. The posterior means of the genetic correlations between culling and the other traits were -0...

  6. Managing Product Usability: How companies deal with usability in the development of electronic consumer products

    OpenAIRE

    Van Kuijk, J.I.

    2010-01-01

    Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use. That the usability of electronic consumer products is under pressure is attributed to an incre...

  7. Assessing the impact of rumen microbial communities on methane emissions and production traits in Holstein cows in a tropical climate.

    Science.gov (United States)

    Cunha, Camila S; Veloso, Cristina M; Marcondes, Marcos I; Mantovani, Hilario C; Tomich, Thierry R; Pereira, Luiz Gustavo R; Ferreira, Matheus F L; Dill-McFarland, Kimberly A; Suen, Garret

    2017-12-01

    The evaluation of how the gut microbiota affects both methane emissions and animal production is necessary in order to achieve methane mitigation without production losses. Toward this goal, the aim of this study was to correlate the rumen microbial communities (bacteria, archaea, and fungi) of high (HP), medium (MP), and low milk producing (LP), as well as dry (DC), Holstein dairy cows in an actual tropical production system with methane emissions and animal production traits. Overall, DC cows emitted more methane, followed by MP, HP and LP cows, although HP and LP cow emissions were similar. Using next-generation sequencing, it was found that bacteria affiliated with Christensenellaceae, Mogibacteriaceae, S24-7, Butyrivibrio, Schwartzia, and Treponema were negatively correlated with methane emissions and showed positive correlations with digestible dry matter intake (dDMI) and digestible organic matter intake (dOMI). Similar findings were observed for archaea in the genus Methanosphaera. The bacterial groups Coriobacteriaceae, RFP12, and Clostridium were negatively correlated with methane, but did not correlate with dDMI and dOMI. For anaerobic fungal communities, no significant correlations with methane or animal production traits were found. Based on these findings, it is suggested that manipulation of the abundances of these microbial taxa may be useful for modulating methane emissions without negatively affecting animal production. Copyright © 2017 Elsevier GmbH. All rights reserved.

  8. Dominance genetic and maternal effects for genetic evaluation of egg production traits in dual-purpose chickens.

    Science.gov (United States)

    Jasouri, M; Zamani, P; Alijani, S

    2017-10-01

    1. A study was conducted to study direct dominance genetic and maternal effects on genetic evaluation of production traits in dual-purpose chickens. The data set consisted of records of body weight and egg production of 49 749 Mazandaran fowls from 19 consecutive generations. Based on combinations of different random effects, including direct additive and dominance genetic and maternal additive genetic and environmental effects, 8 different models were compared. 2. Inclusion of a maternal genetic effect in the models noticeably improved goodness of fit for all traits. Direct dominance genetic effect did not have noticeable effects on goodness of fit but simultaneous inclusion of both direct dominance and maternal additive genetic effects improved fitting criteria and accuracies of genetic parameter estimates for hatching body weight and egg production traits. 3. Estimates of heritability (h 2 ) for body weights at hatch, 8 weeks and 12 weeks of age (BW0, BW8 and BW12, respectively), age at sexual maturity (ASM), average egg weights at 28-32 weeks of laying period (AEW), egg number (EN) and egg production intensity (EI) were 0.08, 0.21, 0.22, 0.22, 0.21, 0.09 and 0.10, respectively. For BW0, BW8, BW12, ASM, AEW, EN and EI, proportion of dominance genetic to total phenotypic variance (d 2 ) were 0.06, 0.08, 0.01, 0.06, 0.06, 0.08 and 0.07 and maternal heritability estimates (m 2 ) were 0.05, 0.04, 0.03, 0.13, 0.21, 0.07 and 0.03, respectively. Negligible coefficients of maternal environmental effect (c 2 ) from 0.01 to 0.08 were estimated for all traits, other than BW0, which had an estimate of 0.30. 4. Breeding values (BVs) estimated for body weights at early ages (BW0 and BW8) were considerably affected by components of the models, but almost similar BVs were estimated by different models for higher age body weight (BW12) and egg production traits (ASM, AEW, EN and EI). Generally, it could be concluded that inclusion of maternal effects (both genetic and

  9. Production processes of multiply charged ions by electron impact

    International Nuclear Information System (INIS)

    Oda, Nobuo

    1980-02-01

    First, are compared the foil or gas stripper and the ion sources utilizing electron-atom ionizing collisions, which are practically used or are under development to produce multiply charged ions. A review is made of the fundamental physical parameters such as successive ionization potentials and various ionization cross sections by electron impact, as well as the primary processes in multiply charged ion production. Multiply charged ion production processes are described for the different existing ion sources such as high temperature plasma type, ion-trapping type and discharge type. (author)

  10. Future opportunities in production of disposable optics and electronics

    Science.gov (United States)

    Korhonen, Raimo

    2001-05-01

    The several production methods of paper processing chain can be used, by analogy, to generate novel ideas for production of optics and electronics. Paper processing is a very fast reel-to-reel process: In the beginning of the paper web production the process is running at the speed of over thousand meters per minute and the web width can be 10 meters, and still at the later stages the speed is several hundreds of meters per minute with the web width of a couple of meters. There are several potential reel-to-reel production methods like embossing, printing, laminating and different kinds of vacuum coating, for example evaporation and sputtering. End products are complex multi-layer composite structures. The benefits from this analogy for optics and electronics would be ideas for ultra fast production, paper-like disposable and recyclable products and the integration of optics and electronics into ordinary things like books, wallpapers, tissue papers and packages. Two experiments are presented to demonstrate the possibilities. In the first experiment optical patterns are embossed directly on paper. In the second one conductive polymers are printed on paper and plastic webs. In future, a wide network of cooperation will be needed to realize all the opportunities.

  11. Health disorders and their association with production and functional traits in Holstein Friesian cows

    Directory of Open Access Journals (Sweden)

    Francesca Cesarini

    2010-01-01

    calving increased the risk of mastitis occurrence by nearly 50%. Regular recording of herd health  data seems advisable for a better understanding of the relationships between production and functional traits and the  occurrence of health disorders. 

  12. Effects of variation in porcine MYOD1 gene on muscle fiber characteristics, lean meat production, and meat quality traits.

    Science.gov (United States)

    Lee, E A; Kim, J M; Lim, K S; Ryu, Y C; Jeon, W M; Hong, K C

    2012-09-01

    Three single nucleotide polymorphisms (SNPs) in the porcine MYOD1 gene were used for association analysis and haplotype construction to evaluate the effects of their substitution. Four hundred and three pigs of Yorkshire and Berkshire breeds were used. The mRNA expression levels of MYOD1 were examined. The g.489C>T and g.1264C>A SNPs were significantly associated with several muscle fiber characteristics, the loin eye area, and lightness. Particularly, animals having hetero-genotypes of both sites showed good performance both in lean meat production and meat quality traits. The results of haplotype substitution were similar to the associations of individual SNPs. Moreover, the 2 SNPs had significant effects on mRNA expression. Therefore, the g.489C>T and g.1264C>A SNPs in MYOD1 may be meaningful DNA markers that can be used for improving important porcine economic traits. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Genetic associations of ketosis and displaced abomasum with milk production traits in early first lactation of Canadian Holsteins.

    Science.gov (United States)

    Koeck, A; Miglior, F; Jamrozik, J; Kelton, D F; Schenkel, F S

    2013-07-01

    The aim of this study was to investigate the genetic associations of ketosis and displaced abomasum with milk production traits in early first lactation of Canadian Holsteins. Health data recorded by producers were available from the national dairy cattle health system in Canada. Test-day records of milk, fat, and protein yields were obtained from the routine milk recoding scheme. Ketosis and displaced abomasum were defined as binary traits (0 = healthy; 1 = sick) based on whether or not the cow had at least 1 case of the respective disease in the period from calving to 100 d after calving. Mean frequencies of ketosis and displaced abomasum were 4.1 and 2.7%, respectively. The following milk production traits were considered: milk yield, fat percentage (Fat%), protein percentage (Prot%), fat-to-protein (F:P) ratio, and F:P ratio >1.5. The trait F:P ratio >1.5 was scored as 1 or 0, based on whether or not the cow had an F:P ratio >1.5. For milk production traits, the first (5-30 d in milk) and the second (31-60 d in milk) test days were considered. Data were analyzed using bivariate linear animal models. Average heritabilities of 0.02 and 0.04 were obtained for ketosis and displaced abomasum, respectively. For milk production traits, the lowest heritabilities were obtained for F:P >1.5 (0.04 to 0.08), whereas the highest estimates were found for Prot% (0.27 to 0.38). Ketosis and displaced abomasum were genetically uncorrelated with milk yield in early lactation. Moderate favorable correlations were found between metabolic diseases and milk composition traits. Ketosis was significantly correlated with Fat% (0.33), F:P ratio (0.30), and F:P ratio >1.5 (0.35) at the first test day, whereas all genetic correlations with milk composition traits at the second test day were not significant and close to zero. Significant favorable genetic correlations were also found between displaced abomasum and F:P ratio (0.26), F:P ratio >1.5 (0.25) and Prot% (-0.19) at the first test

  14. A stochastic model for the derivation of economic values and their standard deviations for production and functional traits in dairy cattle

    NARCIS (Netherlands)

    Nielsen, H.M.; Groen, A.F.; Ostergaard, S.; Berg, P.

    2006-01-01

    The objective of this paper was to present a model of a dairy cattle production system for the derivation of economic values and their standard deviations for both production and functional traits under Danish production circumstances. The stochastic model used is dynamic, and simulates production

  15. Earthworm functional traits and interspecific interactions affect plant nitrogen acquisition and primary production

    NARCIS (Netherlands)

    Andriuzzi, Walter; Schmidt, Olaf; Brussaard, L.; Faber, J.H.; Bolger, T.

    2016-01-01

    We performed a greenhouse experiment to test how the functional diversity of earthworms, the dominant group of soil macro-invertebrates in many terrestrial ecosystems, affects nitrogen cycling and plant growth. Three species were chosen to represent a range of functional traits: Lumbricus terrestris

  16. I, IGF-II and IGFBP-II with production traits in breeder hens

    African Journals Online (AJOL)

    USER

    2010-02-08

    Feb 8, 2010 ... have shown that circulating IGF-I affects growth rate, body composition and lipid metabolism in ... about 2500 birds of two sexes were kept to produce hatching eggs and chicks produced from these eggs ... Economic indexes are calculated for these traits and birds of two sexes are selected based on their ...

  17. Does functional trait diversity predict aboveground biomass and productivity of tropical forests? Testing three alternative hypotheses

    NARCIS (Netherlands)

    Finegan, B.; Pena Claros, M.; Silva de Oliveira, A.; Ascarrunz, N.; Bret-Harte, M.S.; Carreño Rocabado, I.G.; Casanoves, F.; Diaz, S.; Eguiguren Velepucha, P.; Fernandez, F.; Licona, J.C.; Lorenzo, L.; Salgado Negret, B.; Vaz, M.; Poorter, L.

    2014-01-01

    1. Tropical forests are globally important, but it is not clear whether biodiversity enhances carbon storage and sequestration in them. We tested this relationship focusing on components of functional trait biodiversity as predictors. 2. Data are presented for three rain forests in Bolivia, Brazil

  18. Does functional trait diversity predict aboveground biomass and productivity of tropical forests? Testing three alternative hypotheses

    NARCIS (Netherlands)

    Finegan, B.; Peña Claros, M.; Oliviera, de A.; Alarcón, A.; Ascarrunz, N.; Bret-Harte, M.S.; Carreño-Rocabado, G.; Casanoves, F.; Díaz, S.; Eguiguren Velepucha, P.; Fernandez, F.; Licona, J.C.; Lorenzo, L.; Salgado Negret, B.; Vaz, M.; Poorter, L.

    2015-01-01

    Tropical forests are globally important, but it is not clear whether biodiversity enhances carbon storage and sequestration in them. We tested this relationship focusing on components of functional trait biodiversity as predictors. Data are presented for three rain forests in Bolivia, Brazil and

  19. Production of new particles in electron-positron annihilation

    International Nuclear Information System (INIS)

    Gilman, F.J.

    1977-02-01

    A number of areas are reviewed where there is important progress in the production of new particles in electron--positron annihilation, but of a more detailed quantitative nature. Charmonium states, charmed mesons, and evidence for a charged heavy lepton are covered. 50 references

  20. Comparison of muscle fibre characteristics and production traits among offspring from Meishan dams mated to different sires

    Directory of Open Access Journals (Sweden)

    Ki-Chang Hong

    2010-01-01

    Full Text Available This study evaluated how various porcine sires affected muscle fibre characteristics, with respect to production traits. Sires from Berkshire, Duroc, Meishan, and Yorkshire pigs were mated to Meishan dams (BM, DM, MM, and YM offspring, respectively. A total of 96 pigs were evaluated for muscle fibre characteristics and production traits. The progeny from Duroc and Yorkshire sires had the greatest number of total fibres (P<0.05 and exhibited less backfat thickness (P<0.001 and larger loin muscle areas (P<0.05 than BM pigs. The DM and BM crossbreds showed higher marbling (P<0.01, and colour scores (P<0.05, as well as lower shear force scores (P<0.001. The MM pigs had greater proportional area of type IIb muscle fibres (P<0.05, and also displayed higher drip loss (P<0.01, higher lightness (P<0.001, and a greater incidence of PSE pork (pale, soft, and exudative; 25% than DM, BM, and YM. These results showed that a greater number of total muscle fibres without increasing the cross sectional area of fibres improved lean meat production, and that a lower proportion of type IIb fibres was associated with better meat quality. For these reasons, the Duroc sire × Meishan dam crossbreed emerged as the most appropriate mating type examined herein to simultaneously enhance both lean meat production and meat quality.

  1. Production traits of artificially and naturally hatched geese in intensive and free-range systems - II: slaughter, carcass and meat quality traits.

    Science.gov (United States)

    Boz, M A; Sarıca, M; Yamak, U S

    2017-04-01

    1. This study investigates the slaughter, carcass and meat quality traits of artificially and naturally hatched geese in intensive and free-range production systems. 2. The study was conducted with 114 naturally hatched and 102 artificially hatched geese. From each replicate of the intensive and free-range systems, one female and one male goose were slaughtered at the ages of 14, 16 and 18 weeks (a total of 32 geese per slaughter week). 3. Artificially hatched geese had higher slaughter weights (5280 vs. 4404 g), carcass weights (3520 vs. 2863), dressing percentages (66.6-65.2% vs. 65.0-63.6%) and carcass part, feather and edible inner organ weights. The ratio of both edible inner organs and abdominal fat was higher in naturally hatched geese. Breast meat L*, a* and pH values and thigh meat dry matter values were higher in artificially hatched geese, whereas thigh meat b* and pH values were higher in naturally hatched geese. 4. Intensively reared geese had higher slaughter weights (4900 vs. 4783 g), carcass weights (3253 vs. 3130 g) and abdominal fat weights (280 vs. 250 g), as well as higher dressing percentages (66.3-64.9% vs. 65.3-63.9%). Breast meat b* and thigh meat L* values were higher in the intensive system, while breast and thigh pH values, dripping loss and cooking loss were higher in the free-range system. Water-holding capacity was higher in the intensive system. 5. In conclusion, artificially hatched, intensively reared geese had the highest slaughter weights; however, both artificially and naturally hatched geese raised in a free-range system reached acceptable slaughter weights and can thus be recommended for use with this type of production system.

  2. Genetic effects of PDGFRB and MARCH1 identified in GWAS revealing strong associations with semen production traits in Chinese Holstein bulls.

    Science.gov (United States)

    Liu, Shuli; Yin, Hongwei; Li, Cong; Qin, Chunhua; Cai, Wentao; Cao, Mingyue; Zhang, Shengli

    2017-07-03

    Using a genome-wide association study strategy, our previous study discovered 19 significant single-nucleotide polymorphisms (SNPs) related to semen production traits in Chinese Holstein bulls. Among them, three SNPs were within or close to the phosphodiesterase 3A (PDE3A), membrane associated ring-CH-type finger 1 (MARCH1) and platelet derived growth factor receptor beta (PDGFRB) genes. The present study was designed with the objectives of identifying genetic polymorphism of the PDE3A, PDGFRB and MARCH1 genes and their effects on semen production traits in a Holstein bull population. A total of 20 SNPs were detected and genotyped in 730 bulls. Association analyses using de-regressed estimated breeding values of each semen production trait revealed four statistically significant SNPs for one or more semen production traits (P semen volume per ejaculate. Furthermore, high expression of the MARCH1 gene was observed in sperm cells. One SNP (rs43445726) in the regulatory region of MARCH1 had a significant effect on gene expression. Our study demonstrated the significant associations of genetic variants of the PDGFRB and MARCH1 genes with semen production traits. The identified SNPs may serve as genetic markers to optimize breeding programs for semen production traits in Holstein bull populations.

  3. Electric fields, electron production, and electron motion at the stripper foil in the Los Alamos Proton Storage Ring

    International Nuclear Information System (INIS)

    Plum, M.

    1995-01-01

    The beam instability at the Los Alamos Proton Storage Ring (PSR) most likely involves coupled oscillations between electrons and protons. For this instability to occur, there must be a strong source of electrons. Investigation of the various sources of electrons in the PSR had begun. Copious electron production is expected in the injection section because this section contains the stripper foil. This foil is mounted near the center of the beam pipe, and both circulating and injected protons pass through it, thus allowing ample opportunity for electron production. This paper discusses various mechanisms for electron production, beam-induced electric fields, and electron motion in the vicinity of the foil

  4. Effect of Polymorphism of some Candidate Genes from Growth Hormone Axis on Egg Production Traits in Mazandaran Native Fowls

    Directory of Open Access Journals (Sweden)

    B Enayati

    2012-02-01

    Full Text Available In the present study the allelic polymorphisms of GH, GHR and TGFβ3 genes and its association with egg production traits were investigated. Blood samples randomly were collected from breeder hens of Mazandaran native fowls breeding station and transported to the laboratory in cold chain condition. DNA was extracted using modified salting out method and the desired loci were amplified by specific primers. All samples genotyping were carried out by RFLP-PCR method. The frequency of each (+ and (- alleles was estimated at 0.7981 and 0.2019 for GH, 0.9937 and 0.0063 for GHR and 0.8037 and 0.1961 for TGFβ3 loci, respectively. The heterozygote genotype was detected in both GH and TGFβ3 loci but all individuals showed homozygote genotype in GHR marker site. The chi-squared test showed that all individuals in both GH and TGFβ3 loci were in HW equilibrium. Statistical analysis of showed that GH marker site had a significant effect on both phenotypic and breeding values of egg weight at puberty (EWM and age at first laying egg (AFE, respectively. The mean comparison showed that individuals with -/- genotype in GH marker site had higher phenotypic values for EWM but lower breeding values for AFE trait. The GHR and TGFβ3 loci and also the interaction between GH×TGFβ3 loci were not statistically significant on phenotypic and breeding values of mentioned traits..

  5. Selection for production-related traits in Pelargonium zonale: improved design and analysis make all the difference.

    Science.gov (United States)

    Molenaar, Heike; Glawe, Martin; Boehm, Robert; Piepho, Hans-Peter

    2017-01-01

    Ornamental plant variety improvement is limited by current phenotyping approaches and neglected use of experimental designs. The present study was conducted to show the benefits of using an experimental design and corresponding analysis in ornamental breeding regarding simulated response to selection in Pelargonium zonale for production-related traits. This required establishment of phenotyping protocols for root formation and stem cutting counts, with which 974 genotypes were assessed in a two-phase experimental design. The present paper evaluates this protocol. The possibility of varietal improvement through indirect selection on secondary traits such as branch count and flower count was assessed by genetic correlations. Simulated response to selection varied greatly, depending on the genotypic variances of the breeding population and traits. A varietal improvement of over 20% is possible for stem cutting count, root formation, branch count and flower count. In contrast, indirect selection of stem cutting count by branch count or flower count was found to be ineffective. The established phenotypic protocols and two-phase experimental designs are valuable tools for breeding of P. zonale .

  6. Does functional trait diversity predict aboveground biomass and productivity of tropical forests? Testing three alternative hypotheses

    OpenAIRE

    Finegan, B.; Pena Claros, M.; Silva de Oliveira, A.; Ascarrunz, N.; Bret-Harte, M.S.; Carreño Rocabado, I.G.; Casanoves, F.; Diaz, S.; Eguiguren Velepucha, P.; Fernandez, F.; Licona, J.C.; Lorenzo, L.; Salgado Negret, B.; Vaz, M.; Poorter, L.

    2014-01-01

    1. Tropical forests are globally important, but it is not clear whether biodiversity enhances carbon storage and sequestration in them. We tested this relationship focusing on components of functional trait biodiversity as predictors. 2. Data are presented for three rain forests in Bolivia, Brazil and Costa Rica. Initial above-ground biomass and biomass increments of survivors, recruits and survivors + recruits (total) were estimated for trees ≥10 cm d.b.h. in 62 and 21 1.0-ha plots, respecti...

  7. Research of the internal electron-positron pair production

    International Nuclear Information System (INIS)

    Fenyes, Tibor

    1985-01-01

    The phenomenon of internal electron-positron pair production by excited nuclei is briefly reviewed. The advantages of this phenomenon in nuclear structure investigations are pointed. The new Si(Li)-Si(Li) electron spectrometer with superconducting magnetic transporter (SMS) built at ATOMKI, Hungary, was tested for detection of internal electron-positron pair production events. Proton beam of a Van de Graaff accelerator of 5 MV was used to excite the target nuclei of sup(27)Al, sup(42)Ca and sup(19)F. The internal pair production coefficients were measured and compared with the data of literature. The detection efficiency of SMS is calculated to be (37+-7)%. The test proved that the SMS is suitable for nuclear structure investigations producing electron-positron pairs. The SMS of ATOMKI is recently the top instrument all over the world in this field: its detection efficiency, energy resolution and applicability for multipolarity identification are much better than these properties of other detectors. (D.Gy.)

  8. Scaling up the diversity-resilience relationship with trait databases and remote sensing data: the recovery of productivity after wildfire.

    Science.gov (United States)

    Spasojevic, Marko J; Bahlai, Christie A; Bradley, Bethany A; Butterfield, Bradley J; Tuanmu, Mao-Ning; Sistla, Seeta; Wiederholt, Ruscena; Suding, Katharine N

    2016-04-01

    Understanding the mechanisms underlying ecosystem resilience - why some systems have an irreversible response to disturbances while others recover - is critical for conserving biodiversity and ecosystem function in the face of global change. Despite the widespread acceptance of a positive relationship between biodiversity and resilience, empirical evidence for this relationship remains fairly limited in scope and localized in scale. Assessing resilience at the large landscape and regional scales most relevant to land management and conservation practices has been limited by the ability to measure both diversity and resilience over large spatial scales. Here, we combined tools used in large-scale studies of biodiversity (remote sensing and trait databases) with theoretical advances developed from small-scale experiments to ask whether the functional diversity within a range of woodland and forest ecosystems influences the recovery of productivity after wildfires across the four-corner region of the United States. We additionally asked how environmental variation (topography, macroclimate) across this geographic region influences such resilience, either directly or indirectly via changes in functional diversity. Using path analysis, we found that functional diversity in regeneration traits (fire tolerance, fire resistance, resprout ability) was a stronger predictor of the recovery of productivity after wildfire than the functional diversity of seed mass or species richness. Moreover, slope, elevation, and aspect either directly or indirectly influenced the recovery of productivity, likely via their effect on microclimate, while macroclimate had no direct or indirect effects. Our study provides some of the first direct empirical evidence for functional diversity increasing resilience at large spatial scales. Our approach highlights the power of combining theory based on local-scale studies with tools used in studies at large spatial scales and trait databases to

  9. Low-fiber alfalfa (Medicago sativa L.) meal in the laying hen diet: effects on productive traits and egg quality.

    Science.gov (United States)

    Laudadio, V; Ceci, E; Lastella, N M B; Introna, M; Tufarelli, V

    2014-07-01

    This study was designed to determine the effects on laying performance and egg quality resulting from partial substitution of soybean meal (SBM) with low-fiber alfalfa (LFA; Medicago sativa L.) meal in the diet of early-phase laying hens. ISA Brown layers, 18 wk of age, were randomly allocated to 2 dietary treatments and fed for 10 wk. The hens were fed 2 wheat middling-based diets: a control diet, which contained SBM (15% of diet), and a test diet containing LFA (15% of diet) as the main protein source. Low-fiber alfalfa meal was obtained by a combination of sieving and air-classification processes. Feed intake was recorded daily, and egg production was calculated on a hen-day basis; eggs from each group were weekly collected to evaluate egg components and quality. The partial substitution of SBM with LFA had no adverse effect on growth performance of early-phase laying hens. Egg production and none of the egg-quality traits examined were influenced by dietary treatment, except for yolk color (P alfalfa meal in the laying-hen diet can positively influence yolk quality without adversely affecting productive traits. © 2014 Poultry Science Association Inc.

  10. Managing Product Usability : How companies deal with usability in the development of electronic consumer products

    NARCIS (Netherlands)

    Van Kuijk, J.I.

    2010-01-01

    Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to

  11. Stimulated Raman scattering and hot-electron production

    International Nuclear Information System (INIS)

    Drake, R.P.; Turner, R.E.; Lasinski, B.F.; Estabrook, K.G.; Campbell, E.M.; Wang, C.L.; Phillion, D.W.; Williams, E.A.; Kruer, W.L.

    1985-01-01

    High-intensity laser light can excite parametric instabilities that scatter or absorb it. One instability that can arise when laser light penetrates a plasma is sub-quarter-critical stimulated Raman (SQSR) scattering. It occurs below the quarter-critical density of the incident light and involves the decay of the incident light wave into a scattered light wave and electron plasma wave. The scattered-light wavelength ranges from 1 to 2 times that of the incident light, depending on the plasma density and temperature. This article reports studies of SQSR scattering and hot-electron production in plasmas produced by irradiating thick gold targets with up to 4 kJ of 0.53-μm light in 1-ns (FWHM) pulses. These studies have important implications for laser fusion. Hot electrons attributed to the SQSR instability can increase the difficulty of achieving high-gain implosions by penetrating and preheating the fusion fuel

  12. Genetic merit for fertility traits in Holstein cows: I. Production characteristics and reproductive efficiency in a pasture-based system.

    Science.gov (United States)

    Cummins, S B; Lonergan, P; Evans, A C O; Berry, D P; Evans, R D; Butler, S T

    2012-03-01

    The objective of the present study was to characterize the phenotypic performance of cows with similar proportions of Holstein genetics, similar genetic merit for milk production traits, but with good (Fert+) or poor (Fert-) genetic merit for fertility traits. Specifically, we tested the hypothesis that cows with a negative estimated breeding value for calving interval would have superior fertility performance and would have detectable differences in body reserve mobilization and circulating concentrations of metabolic hormones and metabolites compared with cows that had a positive estimated breeding value for calving interval. For the duration of the study, cows were managed identically as a single herd in a typical grass-based, spring-calving production system. A total of 80 lactation records were available from 26 Fert+ and 26 Fert- cows over 2 consecutive years (2008 and 2009). During yr 1, cows were monitored during a 20-wk breeding season to evaluate reproductive performance. Milk production, body condition score (scale 1 to 5), body weight, grass dry matter intake, energy balance, and metabolic hormone and metabolite data were collected during both years. The Fert+ cows had greater daily milk yield (19.5 vs. 18.7 kg/d), shorter interval from calving to conception (85.6 vs. 113.8 d), and fewer services per cow (1.78 vs. 2.83). No difference between groups in grass dry matter intake, energy balance, or body weight was observed. The Fert+ cows maintained greater BCS during mid (2.84 vs. 2.74 units) and late lactation (2.82 vs. 2.73 units). Circulating concentrations of insulin-like growth factor-I were greater throughout the gestation-lactation cycle in Fert+ cows (148.3 vs. 128.2 ng/mL). The Fert+ cows also had greater circulating concentrations of insulin during the first 4 wk of lactation (1.71 vs. 1.24 μIU/mL). Analysis of records from national herd data verified the association between genetic merit for fertility traits and phenotypic reproductive

  13. Investigation of 123I production using electron accelerator

    International Nuclear Information System (INIS)

    Avetisyan, Albert; Avagyan, Robert; Dallakyan, Ruben; Avdalyan, Gohar; Dobrovolsky, Nikolay; Gavalyan, Vasak; Kerobyan, Ivetta; Harutyunyan, Gevorg

    2017-01-01

    The possibility of 123 I isotope production with the help of the high-intensity bremsstrahlung photons produced by the electron beam of the LUE50 linear electron accelerator at the A.I. Alikhanyan National Science Laboratory (Yerevan Physics Institute [YerPhI]) is considered. The production method has been established and shown to be successful. The 124 Xe(γ,n) 123 Xe → 123 I nuclear reaction has been investigated and the cross-section was calculated by nuclear codes TALYS 1.6 and EMPIRE 3.2. The optimum parameter of the thickness of the target was determined by GEANT4 code. For the normalized yield of 123 I, the value of 143 Bq/(mg·μA·h) has been achieved.

  14. 75 FR 65293 - Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for...

    Science.gov (United States)

    2010-10-22

    ...] Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for... Requirements for the Registration of Veterinary Medicinal Products (VICH) has developed a draft guideline titled ``Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for Transfer of Data...

  15. Effects of various stocking density on productive performance and some physiological traits of broiler chicks

    OpenAIRE

    Ihsan T. Tayeb,; Siamand Nizar Hassan,; Merkhan M. Mustafa,; Shawkat Abdulrazaq M. Sadeq,; Gulizar Issa Ameen,; Asia Mohamed Hassan

    2011-01-01

    This experiment was carried out as a survey at the commercial poultry farm of broiler chickens in Duhok region namely Amedy, Akry and Sumail in order to study the effect of stocking density on the chick performance and some physiological traits. Chicks were divided into three stocking densities namely 8.66, 10.41 and 13.36 birds/m². The results obtained are summarized as follows: Live body weights and feed conversion ratio at 7 weeks of age were non significant differences between different s...

  16. Possibility of some radionuclides production using high energy electron Bremsstrahlung

    International Nuclear Information System (INIS)

    Balzhinnyam, N.; Belov, A.G.; Gehrbish, Sh; Maslov, O.D.; Shvetsov, V.N.; Ganbold, G.

    2008-01-01

    The method of some radionuclides production using high energy Bremsstrahlung of electron accelerators and determination of photonuclear reaction yield and specific activities for some radionuclides is described. Photonuclear reaction yield and specific activities for some radionuclides are determined for 117m Sn, 111 In and 195m Pt. Based on the experimental data obtained at low energy (E e- e- = 75 MeV) of the IREN facility (FLNR, JINR) at irradiation of high purity platinum and tin metals

  17. Survey on neutron production by electron beam from high power CW electron linear accelerator

    International Nuclear Information System (INIS)

    Toyama, S.

    1999-04-01

    In Japan Nuclear Cycle Development Institute, the development of high current CW electron linear accelerator is in progress. It is possible for an accelerator to produce neutrons by means of a spallation and photo nuclear reactions. Application of neutron beam produced by bremsstrahlung is one of ways of the utilization for high current electron accelerator. It is actual that many electron linear accelerators which maximum energy is higher than a few hundreds MeV are used as neutron sources. In this report, an estimate of neutron production is evaluated for high current CW electron linear accelerator. The estimate is carried out by 10 MeV beam which is maximum energy limited from the regulation and rather low for neutron production. Therefore, the estimate is also done by 17 and 35 MeV beam which is possible to be accelerated. Beryllium is considered as a target for lower electron energy in addition to Lead target for higher energy, because Beryllium has low threshold energy for neutron production. The evaluation is carried out in account of the target thickness optimized by the radiation length and neutron cross section reducing the energy loss for both of electron and neutron, so as to get the maximum number of neutrons. The result of the calculations shows neutron numbers 1.9 x 10 10 , 6.1 x 10 13 and 4.8 x 10 13 (n/s), respectively, for 10, 17, and 35 MeV with low duty. The thermal removal from the target is one of critical points. The additional shielding and cooling system is necessary in order to endure radiation. A comparison with other facilities are also carried out. The estimate of neutron numbers suggests the possibility to be applied for neutron radiography and measurement of nuclear data by means of Lead spectrometer, for example. (author)

  18. Particle size distribution of selected electronic nicotine delivery system products.

    Science.gov (United States)

    Oldham, Michael J; Zhang, Jingjie; Rusyniak, Mark J; Kane, David B; Gardner, William P

    2018-03-01

    Dosimetry models can be used to predict the dose of inhaled material, but they require several parameters including particle size distribution. The reported particle size distributions for aerosols from electronic nicotine delivery system (ENDS) products vary widely and don't always identify a specific product. A low-flow cascade impactor was used to determine the particle size distribution [mass median aerodynamic diameter (MMAD); geometric standard deviation (GSD)] from 20 different cartridge based ENDS products. To assess losses and vapor phase amount, collection efficiency of the system was measured by comparing the collected mass in the impactor to the difference in ENDS product mass. The levels of nicotine, glycerin, propylene glycol, water, and menthol in the formulations of each product were also measured. Regardless of the ENDS product formulation, the MMAD of all tested products was similar and ranged from 0.9 to 1.2 μm with a GSD ranging from 1.7 to 2.2. There was no consistent pattern of change in the MMAD and GSD as a function of number of puffs (cartridge life). The collection efficiency indicated that 9%-26% of the generated mass was deposited in the collection system or was in the vapor phase. The particle size distribution data are suitable for use in aerosol dosimetry programs. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. A search for single electron production in electron positron annihilation at E = 29 GeV

    International Nuclear Information System (INIS)

    Steele, T.R.

    1989-09-01

    This thesis presents experimental results from the ASP detector which took data on e + e - interactions in the PEP storage ring at SLAC. Its design was particularly suitable for searching for production of supersymmetric particles. The motivations for and phenomenology of Supersymmetry are discussed. In particular, the production of a single supersymmetric electron (''selectron'', e) in combination with a supersymmetric photon (''photino'', γ) would result in events in which a single electron and no other particles are observed in the detector at an e + e - collider such as PEP, provided the masses of these particles are not too large. Such events would also result from the production of a single supersymmetric W-boson (''wino'', W) in combination with a supersymmetric neutrino (''sneutrino'', ν). These processes make it possible to search for electrons and winos with masses greater than the beam energy. Observation of these unusual events would distinctly indicate the production of new particles. The ASP detector was designed to be hermetic and to provide efficient event reconstruction for low multiplicity events. The detector is described and its performance is evaluated; it is found to be well-suited to this study. The data sample collected with the detector was thoroughly analyzed for evidence of single-electron events. The various possible background processes are considered and Monte Carlo calculations of the distributions from single selectron and single wino production are presented. Using this information an efficient off-line event selection process was developed, and it is described in detail. 82 refs., 41 figs., 4 tabs

  20. Application of electron beam curing technology for paper products

    International Nuclear Information System (INIS)

    Takaharu Miura

    1999-01-01

    The electron beam (EB) curing technology has rapidly advanced in recent years. However there were few examples applying this technology to paper products. One reason comes from the high price of EB equipment and the other comes from the difficulty of controlling the irradiation which gives damages to paper. In spite of these problems, the EB cured coating layer shows remarkable features, such as solvent-resistance, water-resistance, heat-resistance and high smoothness using the drum casting technique. Concentrating on application of this technology to paper, we have already developed some products. For example, paper for printings (Super Mirror PN) and for white boards (Super Mirror WB) have been manufactured. In this presentation, we are going to introduce this EB curing technique and the products

  1. APPROACH REGARDING SOME CONFORMATION AND MILK PRODUCTION TRAITS IN ROMANIAN SIMMENTAL CATTLE FORM HARGHITA AREA INCLUDED IN THE OFFICIAL CONTROLL

    Directory of Open Access Journals (Sweden)

    V. CIGHI

    2009-10-01

    Full Text Available Analysis of performance data regarding the conformation traits (withers height, body weight, thoracic perimeter, including the traits that concur to milk production (total milk production per normal lactation, fat percent, total fat amount from milk, in mothers-cattle of bulls, candidate mothers-cattle of bulls and active population of Romanian Spotted Simmental breed from Harghita region, allow us to ascertain the followings: The body weight of mothers-cattle of bulls, candidate mothers-cattle for bulls and also of those from the active population of Harghita region, prove the existence of a valuable genetic material with a high superiority of 30 kg of the mothers-cattle of bulls related the candidate mothers-cattle of bulls and of 50 kg related the active population; all of these emphasize the stringency of the selection performed. Analyzing the waistline of the three populations, it was possible to ascertain that the mothers-cattle of bulls values over class those of the candidate mothers-cattle of bulls and of the active population with 1 cm, respectively 4,1 cm. This difference indicates the researchers concern for raising the waistline in the Romanian Spotted Simmental breed from Harghita region. The thoracic perimeter values were adjacent those of the mothers-cattle of bulls and of the candidate mothers-cattle of bulls (200,00±3,70 cm respectively 199,30±1,24 cm and 185,70±0,61 cm in the active population. The values of circa 7000 kg milk realized in normal lactation of the mothers-cattle of bulls and candidate mothers-cattle of bulls, are showing a very good intensity of the selection, proved by the selection difference registered between the active population and the above two categories. These high milk productions registered for the mothers-cattle of bulls and candidate mothers-cattle of bulls are indicating a high productivity potential. The 250 kg of total milk fat achieved are showing a high potential of the Romanian Spotted

  2. Comparative epigenetics: relevance to the regulation of production and health traits in cattle.

    Science.gov (United States)

    Doherty, Rachael; O' Farrelly, Cliona; Meade, Kieran G

    2014-08-01

    With the development of genomic, transcriptomic and bioinformatic tools, recent advances in molecular technologies have significantly impacted bovine bioscience research and are revolutionising animal selection and breeding. Integration of epigenetic information represents yet another challenging molecular frontier. Epigenetics is the study of biochemical modifications to DNA and to histones, the proteins that provide stability to DNA. These epigenetic changes are induced by environmental stimuli; they alter gene expression and are potentially heritable. Epigenetics research holds the key to understanding how environmental factors contribute to phenotypic variation in traits of economic importance in cattle including development, nutrition, behaviour and health. In this review, we discuss the potential applications of epigenetics in bovine research, using breakthroughs in human and murine research to signpost the way. © 2014 Stichting International Foundation for Animal Genetics.

  3. Integrating Hazardous Materials Characterization and Assessment Tools to Guide Pollution Prevention in Electronic Products and Manufacturing

    Science.gov (United States)

    Lam, Carl

    Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative

  4. Maternal and genetic influences on production and reproduction traits in pigs

    NARCIS (Netherlands)

    Steen, van der H.A.M.

    1983-01-01

    The profitability of pig production may be expressed as a function of reproductivity and productivity. The optimal selection pressure on reproductivity relative to productivity depends on the response to selection and the economic value of the response. Reproductive performance is primarily a

  5. Production of annular electron beams by foilless diodes

    International Nuclear Information System (INIS)

    Miller, R.B.; Prestwich, K.R.; Poukey, J.W.; Shope, S.L.

    1980-01-01

    A number of important aspects of the production of annular electron beams by foilless diodes are examined, both theoretically and experimentally. The theories of Ott, Antonsen, and Lovelace (OAL) and Chen and Lovelace (CL) are compared, and the CL theory is extended to include the effect of an axial gap in an approximate fashion. For the case of finite magnetic field strengths, Larmor orbits are examined and radial oscillations of the beam profile are predicted from a beam envelope analysis. Experimental results obtained with both low- and high-impedance sources have been compared with the theory, and based on such studies, the design and construction of an intense hollow beam generator are described. Experimental results obtained with the new diode compare favorably with both the analytic theory and the results of numerical simulations. The device currently produces 2-MeV electrons at beam currents of 65--70 kA

  6. Novel genetic markers of the carbonic anhydrase II gene associated with egg production and reproduction traits in Tsaiya ducks.

    Science.gov (United States)

    Chang, M-T; Cheng, Y-S; Huang, M-C

    2013-02-01

    In our previous cDNA microarray study, we found that the carbonic anhydrase II (CA2) gene is one of the differentially expressed transcripts in the duck isthmus epithelium during egg formation period. The aim of this study was to identify the single-nucleotide polymorphisms (SNPs) in the CA2 gene of Tsaiya ducks. The relationship of SNP genotype with egg production and reproduction traits was also investigated. A total of 317 ducks from two lines, a control line with no selection and a selected line, were employed for testing. Three SNPs (C37T, A62G and A65G) in the 3'-untranslated region of the CA2 gene were found. SNP-trait association analysis showed that SNP C37T and A62G were associated with duck egg weight besides fertility. The ducks with the CT and AG genotypes had a 1.46 and 1.62 g/egg lower egg weight as compared with ducks with the CC and AA genotypes, respectively (p ducks with CT and AG genotypes had 5.20% and 4.22% higher fertility than those with CC and AA genotypes, respectively (p duck fertility, and the diplotype H1H4 was dominant for duck fertility. These findings might provide the basis for balanced selection and may be used in marker-assisted selection to improve egg weight and fertility simultaneously in the Tsaiya ducks. © 2012 Blackwell Verlag GmbH.

  7. Plant traits, productivity, biomass and soil properties from forest sites in the Pacific Northwest, 1999–2014

    Science.gov (United States)

    Berner, Logan T.; Law, Beverly E.

    2016-01-01

    Plant trait measurements are needed for evaluating ecological responses to environmental conditions and for ecosystem process model development, parameterization, and testing. We present a standardized dataset integrating measurements from projects conducted by the Terrestrial Ecosystem Research and Regional Analysis- Pacific Northwest (TERRA-PNW) research group between 1999 and 2014 across Oregon and Northern California, where measurements were collected for scaling and modeling regional terrestrial carbon processes with models such as Biome-BGC and the Community Land Model. The dataset contains measurements of specific leaf area, leaf longevity, leaf carbon and nitrogen for 35 tree and shrub species derived from more than 1,200 branch samples collected from over 200 forest plots, including several AmeriFlux sites. The dataset also contains plot-level measurements of forest composition, structure (e.g., tree biomass), and productivity, as well as measurements of soil structure (e.g., bulk density) and chemistry (e.g., carbon). Publically-archiving regional datasets of standardized, co-located, and geo-referenced plant trait measurements will advance the ability of earth system models to capture species-level climate sensitivity at regional to global scales. PMID:26784559

  8. Plant traits, productivity, biomass and soil properties from forest sites in the Pacific Northwest, 1999-2014

    Science.gov (United States)

    Berner, Logan T.; Law, Beverly E.

    2016-01-01

    Plant trait measurements are needed for evaluating ecological responses to environmental conditions and for ecosystem process model development, parameterization, and testing. We present a standardized dataset integrating measurements from projects conducted by the Terrestrial Ecosystem Research and Regional Analysis- Pacific Northwest (TERRA-PNW) research group between 1999 and 2014 across Oregon and Northern California, where measurements were collected for scaling and modeling regional terrestrial carbon processes with models such as Biome-BGC and the Community Land Model. The dataset contains measurements of specific leaf area, leaf longevity, leaf carbon and nitrogen for 35 tree and shrub species derived from more than 1,200 branch samples collected from over 200 forest plots, including several AmeriFlux sites. The dataset also contains plot-level measurements of forest composition, structure (e.g., tree biomass), and productivity, as well as measurements of soil structure (e.g., bulk density) and chemistry (e.g., carbon). Publically-archiving regional datasets of standardized, co-located, and geo-referenced plant trait measurements will advance the ability of earth system models to capture species-level climate sensitivity at regional to global scales.

  9. Estimates of Genetic Parameters of Production Traits for Khuzestan Buffaloes of Iran using Repeated-Records Animal Model

    Directory of Open Access Journals (Sweden)

    Maryam Baharizadeh

    2012-10-01

    Full Text Available Buffalo milk yield records were obtained from monthly records of the Animal Breeding Organization of Iran from 1992 to 2009 in 33 herds raised in the Khuzestan province. Variance components, heritability and repeatability were estimated for milk yield, fat yield, fat percentage, protein yield and protein percentage. These estimates were carried out through single trait animal model using DFREML program. Herd-year-season was considered as fixed effect in the model. For milk production traits, age at calving was fitted as a covariate. The additive genetic and permanent environmental effects were also included in the model. The mean values (±SD for milk yield, fat yield, fat percentage, protein yield and protein percentage were 2285.08±762.47 kg, 144.35±54.86 kg, 6.25±0.90%, 97.30±26.73 kg and 4.19±0.27%, respectively. The heritability (±SE of milk yield, fat yield, fat percentage, protein yield and protein percentage were 0.093±0.08, 0.054±0.06, 0.043±0.05, 0.093±0.16 and zero, respectively. These estimates for repeatability were 0.272, 0.132, 0.043, 0.674 and 0.0002, respectively. Lower values of genetic parameter estimates require more data and reliable pedigree records.

  10. Phenotypic correlations between ovum pick-up in vitro production traits and pregnancy rates in Zebu cows.

    Science.gov (United States)

    Vega, W H O; Quirino, C R; Serapião, R V; Oliveira, C S; Pacheco, A

    2015-07-03

    The growth of the Gyr breed in Brazil in terms of genetic gain for milk, along with conditions for market, has led to the use of ovum pick-up in vitro production (OPU-IVP) as a leader in biotechnology for the multiplication of genetic material. The aim of this study was to investigate phenotypic correlations between OPU-IVP-linked characteristics and pregnancy rates registered in an embryo transfer program using Gyr cows as oocyte donors. Data collected from 211 OPU sessions and 298 embryo transfers during the years 2012 and 2013 were analyzed and statistical analysis was performed. Estimates of simple Pearson correlations were calculated for NVcoc and PVcoc (number and proportion of viable cumulus-oocyte complexes, respectively); NcleavD4 and PcleavD4 (number and proportion of cleaved embryos on day 4 of culture, respectively); NTembD7 and PTembD7 (number and proportion of transferable embryos on day 7 of culture, respectively); NPrD30 and PPrD30 (number and proportion of pregnancies 30 days after transfer, respectively); and NPrD60 and PPrD60 (number and proportion of pregnancies 60 days after transfer, respectively). Moderate to moderately high correlations were found for all numerical characteristics, suggesting these as the most suitable parameters for selection of oocyte donors in Gyr programs. NVcoc is proposed as a selection trait due to positive correlations with percentage traits and pregnancy rates 30 and 60 days after transfer.

  11. Electron microscopy of hydrocarbon production in parthenium argentatum (guayule)

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Thomas E. [Univ. of California, Berkeley, CA (United States)

    1977-11-01

    The electron microscope was used to study the biological processes involved in hydrocarbon production. The little desert shrub Guayule (Parthenium argentatum) was selected for study. This shrub can produce hydrocarbons (rubber) in concentrations up to 1/4 of its dry weight. It grows on semi-arid land and has been extensively studied. The potential of Guayule is described in detail. Results of an investigation into the morphology of Guayule at the electron microscope level are given. Experiments, which would allow the biosynthesis of hydrocarbon in Guayule to be followed, were designed. In order to do this, knowledge of the biochemistry of rubber formation was used to select a tracer, mevalonic acid. Mevalonic acid is the precursor of all the terpenoids, a large class of hydrocarbons which includes rubber. It was found that when high enough concentrations of mevalonic acid are administered to seedling Guayule plants, build-ups of metabolized products are found within the chloroplasts of the seedlings. Also, tritium labeled mevalonic acid was used as a precursor, and its metabolic progress was followed by using the technique of electron microscope autoradiography. The results of these experiments also implicated chloroplasts of the Guayule plant in hydrocarbon production. The final task was the development of a system to produce three-dimensional stereo reconstructions of organelles suspected of involvement in hydrocarbon biosynthesis in Guayule. The techniques are designed to reconstruct an object from serial sections of that object. The techniques use stereo imaging both to abstract information for computer processing, and also in the computer produced reconstruction.

  12. Electron-positron pair production in inhomogeneous electromagnetic fields

    International Nuclear Information System (INIS)

    Kohlfürst, C.

    2015-01-01

    The process of electron-positron pair production is investigated within the phase-space Wigner formalism. The similarities between atomic ionization and pair production for homogeneous, but time-dependent linearly polarized electric fields are examined mainly in the regime of multiphoton absorption (field-dependent threshold, above-threshold pair production). Characteristic signatures in the particle spectra are identified (effective mass, channel closing). The non-monotonic dependence of the particle yield on the carrier frequency is discussed as well. The investigations are then extended to spatially inhomogeneous electric fields. New effects arising due to the spatial dependence of the effective mass are discussed in terms of a semi-classical interpretation. An increase in the normalized particle yield is found for various field configurations.Pair production in inhomogeneous electric and magnetic fields is also studied. The influence of a time-dependent spatially inhomogeneous magnetic field on the momentum spectrum and the particle yield is investigated. The Lorentz invariants are identified to be crucial in order to understand pair production by strong electric fields in the presence of strong magnetic fields. (author) [de

  13. Selectron production in quasi-elastic electron-proton scattering

    International Nuclear Information System (INIS)

    Bartels, J.; Hollik, W.

    1985-08-01

    We calculate the cross section for the production of selectrons in quasi-elastic electron proton scattering at HERA energies. In the region of very small momentum transfer the cross section turns out to be large: e.g. sigma=36 pb for a selectron mass of 60 GeV, tsub(min) 2 ), and photino mass small compared to the selectron mass. Together with the clean experimental signature, this large cross section makes the reaction e+P->e+γ tilde+P one of the most promising HERA-processes in connection with the search for supersymmetric particles. (orig.)

  14. Comparison of productive and carcass traits and economic value of lines selected for different criteria, slaughtered at similar weights

    Directory of Open Access Journals (Sweden)

    K. Szendrő

    2016-03-01

    Full Text Available The aim of the experiment was to compare 3 genetic groups, slaughtered at similar weights, to examine their productive and carcass traits and economic value. Three lines of the Pannon Breeding Programme, selected for different criteria, were examined in the experiment. Pannon Ka (PKa, maternal line does were inseminated with semen of PKa, Pannon White (PWhite or Pannon Large (PLarge, terminal line bucks. The kits (PKa×PKa, PWhite×PKa, PLarge×PKa; n=60 in each genetic group were weaned at 35 d of age and reared until 88, 83 and 79, respectively, when they reached similar body weights for slaughtering (2.8 kg. The weight gain of PLarge×PKa was the largest (51.0 g/d and that of PKa×PKa was the smallest (47.2 g/d, while PWhite×PKa (41.8 g/d was intermediate (P<0.001. Difference was found in feed conversion ratio between weaning and the age of slaughter  PKa×PKa: 3.03 respect to PWhite×PKa: 2.75 and PLarge×PKa: 2.66; , P<0.05. Dressing out percentage and ratio of hind part to reference carcass of PWhite×PKa, PLarge×PKa and PKa×PKa were 62.4 and 37.7, 61.8 and 37.5, 61.3 and 36.8%, respectively (P<0.01. Results show that PLarge×PKa rabbits were able to exceed the average economic indicators compared to other groups. It may be concluded that the production performance of growing rabbits was affected by the adult weight, but the carcass traits were influenced by the computer tomography (CT-based selection.

  15. Reaction norm of fertility traits adjusted for protein and fat production level across lactations in Holstein cattle.

    Science.gov (United States)

    Menendez-Buxadera, A; Carabaño, M J; Gonzalez-Recio, O; Cue, R I; Ugarte, E; Alenda, R

    2013-07-01

    A total of 304,001 artificial insemination outcomes in up to 7 lactations from 142,389 Holstein cows, daughters of 5,349 sires and 101,433 dams, calving between January 1995 and December 2007 in 1,347 herds were studied by a reaction norm model. The (co)variance components for days to first service (DFS), days open, nonreturn rate in the first service (NRFS), and number of services per conception were estimated by 6 models: 3 Legendre polynomial degrees for the genetic effects and adjustment or not for the level of fat plus protein (FP) production recorded at day closest to DFS. For all traits and type of FP adjustment, a second degree polynomial showed the best fit. The use of the adjusted FP model did not increase the level of genetic (co)variance components except for DFS. The heritability for each of the traits was low in general (0.03-0.10) and increased from the first to fourth calving; nevertheless, very important variability was found for the estimated breeding value (EBV) of the sires. The genetic correlations (rg) were close to unity between adjacent calvings, but decreased for most distant parities, ranging from rg=0.36 (for DFS) to rg=0.63 (for NRFS), confirming the existence of heterogeneous genetic (co)variance components and EBV across lactations. The results of the eigen decomposition of rg shows that the first eigenvalue explained between 82 to 92% and the second between 8 to 14% of the genetic variance for all traits; therefore, a deformation of the overall mean trajectory for reproductive performance across the trajectory of the different calving could be expected if selection favored these eigenfunctions. The results of EBV for the 50 best sires showed a substantial reranking and variation in the shape of response across lactations. The more important aspect to highlight, however, is the difference between the EBV of the same sires in different calvings, a characteristic known as plasticity, which is particularly important for DFS and NRFS. This

  16. Casein haplotypes and their association with milk production traits in Norwegian Red cattle

    Directory of Open Access Journals (Sweden)

    Nome Torfinn

    2009-02-01

    Full Text Available Abstract A high resolution SNP map was constructed for the bovine casein region to identify haplotype structures and study associations with milk traits in Norwegian Red cattle. Our analyses suggest separation of the casein cluster into two haplotype blocks, one consisting of the CSN1S1, CSN2 and CSN1S2 genes and another one consisting of the CSN3 gene. Highly significant associations with both protein and milk yield were found for both single SNPs and haplotypes within the CSN1S1-CSN2-CSN1S2 haplotype block. In contrast, no significant association was found for single SNPs or haplotypes within the CSN3 block. Our results point towards CSN2 and CSN1S2 as the most likely loci harbouring the underlying causative DNA variation. In our study, the most significant results were found for the SNP CSN2_67 with the C allele consistently associated with both higher protein and milk yields. CSN2_67 calls a C to an A substitution at codon 67 in β-casein gene resulting in histidine replacing proline in the amino acid sequence. This polymorphism determines the protein variants A1/B (CSN2_67 A allele versus A2/A3 (CSN2_67 C allele. Other studies have suggested that a high consumption of A1/B milk may affect human health by increasing the risk of diabetes and heart diseases. Altogether these results argue for an increase in the frequency of the CSN2_67 C allele or haplotypes containing this allele in the Norwegian Red cattle population by selective breeding.

  17. [Production of accentuated personality traits in baroque opera : Opera buffa Arcifanfano-Re dei matti (1749)].

    Science.gov (United States)

    Brunner, J; Hirsch, T; Steger, F

    2016-05-01

    Madness served primarily as a form of amusement for the spectators in operas of the seventeenth century. This representation was far removed from clinical reality. This circumstance changed in the eighteenth century at the time when tragic madness emerged in numerous operas. The opera buffa Arcifanfano-Re dei matti (Arcifanfano-King of fools, premiered in 1749 in Venice, text by Carlo Goldoni 1707-1793 and music by Baldassare Galuppi 1706-1785), which continuously enacts a realm of fools and is meant to appear amusing, is riddled with psychopathological abnormalities for which a retrospective diagnosis is methodologically rejected. However, the opera presents many subjects for working out a typology of fools based on outlasting personality traits of the protagonists. The libretto is investigated. A musical analysis is spared. The conceptualized typology of fools in the opera, which is oriented towards the seven main vices or deadly sins serves, in the tradition of moral satire, to critically hold up a mirror to the audience to reflect their own vices by an amusing characterization of the latter. Historically classified, the treatment of fools by means of isolation, custody, locking up in cages as well as authoritarian measures of submission reflects the custom in those days before humanizing the treatment of people with mental illness in the course of the Enlightenment and the French Revolution. The opera Arcifanfano is essentially characterized by continuous madness. A typology of the fools can be worked out from the precise depiction of the personalities. A mirror is held up to the spectators in terms of vices, in the tradition of the contemporary baroque opera. At the same time, the opera can be classified psychiatrically and historically as a seismograph of its time when in the seventeenth and eighteenth centuries people with mental illness were isolated and incarcerated.

  18. Evaluation of bovine chemerin (RARRES2 gene variation on beef cattle production traits

    Directory of Open Access Journals (Sweden)

    Amanda K Lindholm-Perry

    2012-03-01

    Full Text Available A previous study in cattle based on >48,000 markers identified markers on chromosome 4 near the chemerin gene associated with average daily feed intake (ADFI in steers (P<0.008. Chemerin is an adipokine associated with obesity and metabolic syndrome in humans, representing a strong candidate gene potentially underlying the observed association. To evaluate whether the bovine chemerin gene is involved in feed intake, 16 markers within and around the gene were tested for association in the same resource population. Eleven were nominally significant for ADFI (P<0.05 and two were significant after Bonferroni correction. Two and five SNP in this region were nominally significant for the related traits of average daily gain (ADG and residual feed intake (RFI, respectively. All markers were evaluated for effects on meat quality and carcass phenotypes. Many of the markers associated with ADFI were associated with hot carcass weight (HCW, adjusted fat thickness (AFT, and marbling (P<0.05. Marker alleles that were associated with lower ADFI were also associated with lower HCW, AFT, and marbling. Markers associated with ADFI were genotyped in a validation population of steers representing 14 breeds to determine predictive merit across populations. No consistent relationships for ADFI were detected. To determine whether cattle feed intake or growth phenotypes might be related to chemerin transcript abundance, the expression of chemerin was evaluated in adipose of 114 heifers that were siblings of the steers in the discovery population. Relative chemerin transcript abundance was not correlated with ADFI, ADG, or RFI, but associations with body condition score and yearling weight were observed. We conclude that variation in the chemerin gene may underlie observed association in the resource population, but that additional research is required to determine if this variation is widespread among breeds and to develop robust markers with predictive merit across

  19. The effect of calving season and age at calving on production traits ...

    African Journals Online (AJOL)

    Unknown

    This was done following several trials involving analysis of variance and ... are taken before and after peak yield for a non-persistent cow, the mean yield in ..... Productive performance of Holstein-Friesian cattle in North West Frontier Province.

  20. Genome-wide association analysis of thirty one production, health, reproduction and body conformation traits in contemporary U.S. Holstein cows

    Directory of Open Access Journals (Sweden)

    Van Tassell Curtis P

    2011-08-01

    Full Text Available Abstract Background Genome-wide association analysis is a powerful tool for annotating phenotypic effects on the genome and knowledge of genes and chromosomal regions associated with dairy phenotypes is useful for genome and gene-based selection. Here, we report results of a genome-wide analysis of predicted transmitting ability (PTA of 31 production, health, reproduction and body conformation traits in contemporary Holstein cows. Results Genome-wide association analysis identified a number of candidate genes and chromosome regions associated with 31 dairy traits in contemporary U.S. Holstein cows. Highly significant genes and chromosome regions include: BTA13's GNAS region for milk, fat and protein yields; BTA7's INSR region and BTAX's LOC520057 and GRIA3 for daughter pregnancy rate, somatic cell score and productive life; BTA2's LRP1B for somatic cell score; BTA14's DGAT1-NIBP region for fat percentage; BTA1's FKBP2 for protein yields and percentage, BTA26's MGMT and BTA6's PDGFRA for protein percentage; BTA18's 53.9-58.7 Mb region for service-sire and daughter calving ease and service-sire stillbirth; BTA18's PGLYRP1-IGFL1 region for a large number of traits; BTA18's LOC787057 for service-sire stillbirth and daughter calving ease; BTA15's CD82, BTA23's DST and the MOCS1-LRFN2 region for daughter stillbirth; and BTAX's LOC520057 and GRIA3 for daughter pregnancy rate. For body conformation traits, BTA11, BTAX, BTA10, BTA5, and BTA26 had the largest concentrations of SNP effects, and PHKA2 of BTAX and REN of BTA16 had the most significant effects for body size traits. For body shape traits, BTAX, BTA19 and BTA3 were most significant. Udder traits were affected by BTA16, BTA22, BTAX, BTA2, BTA10, BTA11, BTA20, BTA22 and BTA25, teat traits were affected by BTA6, BTA7, BTA9, BTA16, BTA11, BTA26 and BTA17, and feet/legs traits were affected by BTA11, BTA13, BTA18, BTA20, and BTA26. Conclusions Genome-wide association analysis identified a number of

  1. A comparative study of some productive traits in commercial poultry farms in Duhok Region.

    OpenAIRE

    TAYEB, Ihsan; HASSAN, Siamand; MUSTAFA, Merkhan; SADEQ, Shawkat; AMEEN, Gulizar; HASSAN, Asia; SHEKHU, Nareen

    2011-01-01

    Commercial Ross 308 hybrid broiler were used in this study to evaluate a number of production parameter's including live body weight, feed intake, feed conversion ratio, production index and mortality rate. Significant differences observed in term of Mortality rate also feed intake between region 1 and both region 2 and 3. The data was collected from three regions in Duhok/ Kurdistan Region, Iraq which then will be compared with each other to identify if there is any significant differen...

  2. Models for Estimating Genetic Parameters of Milk Production Traits Using Random Regression Models in Korean Holstein Cattle

    Directory of Open Access Journals (Sweden)

    C. I. Cho

    2016-05-01

    Full Text Available The objectives of the study were to estimate genetic parameters for milk production traits of Holstein cattle using random regression models (RRMs, and to compare the goodness of fit of various RRMs with homogeneous and heterogeneous residual variances. A total of 126,980 test-day milk production records of the first parity Holstein cows between 2007 and 2014 from the Dairy Cattle Improvement Center of National Agricultural Cooperative Federation in South Korea were used. These records included milk yield (MILK, fat yield (FAT, protein yield (PROT, and solids-not-fat yield (SNF. The statistical models included random effects of genetic and permanent environments using Legendre polynomials (LP of the third to fifth order (L3–L5, fixed effects of herd-test day, year-season at calving, and a fixed regression for the test-day record (third to fifth order. The residual variances in the models were either homogeneous (HOM or heterogeneous (15 classes, HET15; 60 classes, HET60. A total of nine models (3 orders of polynomials×3 types of residual variance including L3-HOM, L3-HET15, L3-HET60, L4-HOM, L4-HET15, L4-HET60, L5-HOM, L5-HET15, and L5-HET60 were compared using Akaike information criteria (AIC and/or Schwarz Bayesian information criteria (BIC statistics to identify the model(s of best fit for their respective traits. The lowest BIC value was observed for the models L5-HET15 (MILK; PROT; SNF and L4-HET15 (FAT, which fit the best. In general, the BIC values of HET15 models for a particular polynomial order was lower than that of the HET60 model in most cases. This implies that the orders of LP and types of residual variances affect the goodness of models. Also, the heterogeneity of residual variances should be considered for the test-day analysis. The heritability estimates of from the best fitted models ranged from 0.08 to 0.15 for MILK, 0.06 to 0.14 for FAT, 0.08 to 0.12 for PROT, and 0.07 to 0.13 for SNF according to days in milk of first

  3. Associations of the variation in the porcine myogenin gene with muscle fibre characteristics, lean meat production and meat quality traits.

    Science.gov (United States)

    Kim, J M; Choi, B D; Kim, B C; Park, S S; Hong, K C

    2009-04-01

    Pig breeding is aimed at improving lean meat production ability as well as meat quality, and muscle fibre characteristics may be important for enhancing these traits. Therefore, new molecular markers have been demanded for selecting lean meat production ability and meat quality in live animals. Myogenin belongs to the MyoD gene family, and is a candidate gene responsible for muscle fibre characteristics. We identified a new single nucleotide polymorphism (SNP) site in the 5' upstream region of the myogenin gene (nucleotides C and T). A total of 252 pigs of three breeds were genotyped by polymerase chain reaction-restriction fragment length polymorphism using BspCNI. Additionally, they were genotyped for the previously detected MspI site in the 3'-flanking region (alleles A and B). The CCBB diplotype had the highest frequency over breeds, followed by TCBB and CCAB. The other diplotypes were not found in studied pigs. Association analysis performed for the markers found that the TCBB diplotype has desirable effects on the total number of fibres (p lean meat production ability with good meat quality.

  4. Electronic medical records and efficiency and productivity during office visits.

    Science.gov (United States)

    Furukawa, Michael F

    2011-04-01

    To estimate the relationship between electronic medical record (EMR) use and efficiency of utilization and provider productivity during visits to US office-based physicians. Cross-sectional analysis of the 2006-2007 National Ambulatory Medical Care Survey. The sample included 62,710 patient visits to 2625 physicians. EMR systems included demographics, clinical notes, prescription orders, and laboratory and imaging results. Efficiency was measured as utilization of examinations, laboratory tests, radiology procedures, health education, nonmedication treatments, and medications. Productivity was measured as total services provided per 20-minute period. Survey-weighted regressions estimated association of EMR use with services provided, visit intensity/duration, and productivity. Marginal effects were estimated by averaging across all visits and by major reason for visit. EMR use was associated with higher probability of any examination (7.7%, 95% confidence interval [CI] = 2.4%, 13.1%); any laboratory test (5.7%, 95% CI = 2.6%, 8.8%); any health education (4.9%, 95% CI = 0.2%, 9.6%); and fewer laboratory tests (-7.1%, 95% CI = -14.2%, -0.1%). During pre/post surgery visits, EMR use was associated with 7.3% (95% CI= -12.9%, -1.8%) fewer radiology procedures. EMR use was not associated with utilization of nonmedication treatments and medications, or visit duration. During routine visits for a chronic problem, EMR use was associated with 11.2% (95% CI = 5.7%, 16.8%) more diagnostic/screening services provided per 20-minute period. EMR use had a mixed association with efficiency and productivity during office visits. EMRs may improve provider productivity, especially during visits for a new problem and routine chronic care.

  5. Production objectives and trait preferences of village poultry producers of Ethiopia: implications for designing breeding schemes utilizing indigenous chicken genetic resources.

    Science.gov (United States)

    Dana, Nigussie; van der Waaij, Liesbeth H; Dessie, Tadelle; van Arendonk, Johan A M

    2010-10-01

    To generate information essential for the implementation of breeding schemes suitable for village poultry producers in Ethiopia, a survey was conducted aimed at defining the socioeconomic characteristics of the production environments in different geographic regions, understanding the important functions of chickens, identifying farmers' choice of chicken breeds and the underlying factors that determine the choice of genetic stock used. The survey included both questionnaire survey and a participatory group discussion. A total of 225 households (45 households from each of five Woredas) were interviewed. The questionnaire was designed to collect data covering general information on village poultry production such as socio-management characteristics, production objectives, population structure, breed choice and trait preferences, market preferences of specific traits, and farmers' selection practices. The participatory farmers' discussions were designed to involve stakeholders in defining the breeding objective "traits" and deriving their relative importance in the production environment based on the different functions of chickens and "traits" identified in the interviews. The results showed that production of eggs for consumption is the principal function of chickens in most regions followed by the use as source of income and meat for home consumption. The production system in all geographic regions studied revealed similar features generally characterized by extensive scavenging management, absence of immunization programs, increased risk of exposure of birds to disease and predators, and reproduction entirely based on uncontrolled natural mating and hatching of eggs using broody hens. Farmers' ratings of indigenous chickens with respect to modern breeds showed the highest significance of the adaptive traits in general, and the superior merits of indigenous chickens to high yielding exotic breeds in particular. Adaptation to the production environment was the most

  6. Electron Production and Collective Field Generation in Intense Particle Beams

    International Nuclear Information System (INIS)

    Molvik, A W; Vay, J; Cohen, R; Friedman, A; Lee, E; Verboncoeur, J; Covo, M K

    2006-01-01

    Electron cloud effects (ECEs) are increasingly recognized as important, but incompletely understood, dynamical phenomena, which can severely limit the performance of present electron colliders, the next generation of high-intensity rings, such as PEP-II upgrade, LHC, and the SNS, the SIS 100/200, or future high-intensity heavy ion accelerators such as envisioned in Heavy Ion Inertial Fusion (HIF). Deleterious effects include ion-electron instabilities, emittance growth, particle loss, increase in vacuum pressure, added heat load at the vacuum chamber walls, and interference with certain beam diagnostics. Extrapolation of present experience to significantly higher beam intensities is uncertain given the present level of understanding. With coordinated LDRD projects at LLNL and LBNL, we undertook a comprehensive R and D program including experiments, theory and simulations to better understand the phenomena, establish the essential parameters, and develop mitigating mechanisms. This LDRD project laid the essential groundwork for such a program. We developed insights into the essential processes, modeled the relevant physics, and implemented these models in computational production tools that can be used for self-consistent study of the effect on ion beams. We validated the models and tools through comparison with experimental data, including data from new diagnostics that we developed as part of this work and validated on the High-Current Experiment (HCX) at LBNL. We applied these models to High-Energy Physics (HEP) and other advanced accelerators. This project was highly successful, as evidenced by the two paragraphs above, and six paragraphs following that are taken from our 2003 proposal with minor editing that mostly consisted of changing the tense. Further benchmarks of outstanding performance are: we had 13 publications with 8 of them in refereed journals, our work was recognized by the accelerator and plasma physics communities by 8 invited papers and we have

  7. Genetic analysis of oocyte and embryo production traits in Guzerá breed donors and their associations with age at first calving.

    Science.gov (United States)

    Perez, B C; Peixoto, M G C D; Bruneli, F T; Ramos, P V B; Balieiro, J C C

    2016-04-26

    The objective of this study was to estimate variance components for oocyte and embryo production traits in Guzerá breed female donors, and investigate their associations with age at first calving (AFC). The traits analyzed were the number of viable oocytes (NOV), the number of grade I oocytes (NGI), the number of cleaved embryos (NCLV), and viable embryos produced (NEMB), and the percentages of viable oocytes (POV), grade I oocytes (PGI), cleaved embryos (PCLV), and viable embryos (PEMB). Data were obtained from 5173 ovary puncture and in vitro fertilization (IVF) sessions using 1080 Guzerá female donors of different ages, occurred from March 2005 to July 2013. Variables were log-transformed (logeX+1) prior to analysis. (Co)variance components were estimated by restricted maximum likelihood (REML), using one- and two-trait animal models. Permanent environment and IVF sire (father of the embryos) random effects were included. Estimated heritabilities for NOV, NGI, NCLV, NEMB, POV, PGI, PCLV, and PEMB were 0.19, 0.08, 0.16, 0.14, 0.04, 0.03, 0.01, and 0.07, respectively. Repeatabilities for count traits (NOV, NGI, NCLV, and NEMB) varied from 0.14 and 0.32, higher than estimated for percentage traits (POV, PGI, PCLV, and PEMB), which varied from 0.01 to 0.08. Selection for NOV may be more appropriate in breeding programs than selection for NEMB, because of its strong genetic correlation (0.68) with NEMB and its greater time- and cost-effectiveness. AFC was only weakly associated with the oocyte and embryo production traits, which indicates that there would be no effect on AFC when selecting for these traits.

  8. THE ANALYSIS OF CORRELATIONS BETWEEN THE MAIN TRAITS OF WOOL PRODUCTION ON PALAS SHEEP LINE FOR MEAT, MILK AND HIGH PROLIFICACY

    Directory of Open Access Journals (Sweden)

    ANA ENCIU

    2008-10-01

    Full Text Available The aim of this paper was to analyze the coefficient of phenotypic correlation and regression between main wool production traits for the sheep belonging to the Palas line specialized for meat, milk and with high prolificacy. The study was performed on a 10 years interval, the phenotypic correlation and the regression being determined for age groups and body weight classes for the following traits: raw wool production, the staple length, wool diameter and body weight at shearing. The obtained results are showing that for the specialized sheep lines the efficiency of wool production is also higher for the sheep with moderate body weights but for these sheep lines the selection for body weight will be done based on the morphoproductive parameters specific to the purpose of exploitation (milk production, meat production or high prolificacy.

  9. Root interactions in a diverse grassland : the role of root traits in belowground productivity and decomposition

    NARCIS (Netherlands)

    Oram, Natalie J.

    2018-01-01

    Background Plant diversity influences ecosystem functioning. A positive relation between plant diversity and productivity above- and belowground has been established. Aboveground, this effect has been shown to be due to complementarity effects, interactions between species in a mixture

  10. Plant traits and environment: floating leaf blade production and turnover of waterlilies

    Directory of Open Access Journals (Sweden)

    Peter F. Klok

    2017-04-01

    Full Text Available Floating leaf blades of waterlilies fulfill several functions in wetland ecosystems by production, decomposition and turnover as well as exchange processes. Production and turnover rates of floating leaf blades of three waterlily species, Nuphar lutea (L. Sm., Nymphaea alba L. and Nymphaea candida Presl, were studied in three freshwater bodies, differing in trophic status, pH and alkalinity. Length and percentages of leaf loss of marked leaf blades were measured weekly during the growing season. Area and biomass were calculated based on leaf length and were used to calculate the turnover rate of floating leaf blades. Seasonal changes in floating leaf production showed that values decreased in the order: Nymphaea alba, Nuphar lutea, Nymphaea candida. The highest production was reached for Nuphar lutea and Nymphaea alba in alkaline, eutrophic water bodies. The production per leaf was relatively high for both species in the acid water body. Nymphaea candida showed a very short vegetation period and low turnover rates. The ratio Total potential leaf biomass/Maximum potential leaf biomass (P/Bmax of the three species ranged from 1.35–2.25. The ratio Vegetation period (Period with floating leaves/Mean leaf life span ranged from 2.94–4.63, the ratio Growth period (Period with appearance of new floating leaves/Vegetation period from 0.53–0.73. The clear differences between Nymphaea candida versus Nuphar lutea and Nymphaea alba, may be due to adaptations of Nymphaea candida to an Euro-Siberic climate with short-lasting summer conditions.

  11. Plant traits and environment: floating leaf blade production and turnover of waterlilies.

    Science.gov (United States)

    Klok, Peter F; van der Velde, Gerard

    2017-01-01

    Floating leaf blades of waterlilies fulfill several functions in wetland ecosystems by production, decomposition and turnover as well as exchange processes. Production and turnover rates of floating leaf blades of three waterlily species, Nuphar lutea (L.) Sm., Nymphaea alba L. and Nymphaea candida Presl, were studied in three freshwater bodies, differing in trophic status, pH and alkalinity. Length and percentages of leaf loss of marked leaf blades were measured weekly during the growing season. Area and biomass were calculated based on leaf length and were used to calculate the turnover rate of floating leaf blades. Seasonal changes in floating leaf production showed that values decreased in the order: Nymphaea alba , Nuphar lutea , Nymphaea candida . The highest production was reached for Nuphar lutea and Nymphaea alba in alkaline, eutrophic water bodies. The production per leaf was relatively high for both species in the acid water body. Nymphaea candida showed a very short vegetation period and low turnover rates. The ratio Total potential leaf biomass/Maximum potential leaf biomass (P/B max ) of the three species ranged from 1.35-2.25. The ratio Vegetation period (Period with floating leaves)/Mean leaf life span ranged from 2.94-4.63, the ratio Growth period (Period with appearance of new floating leaves)/Vegetation period from 0.53-0.73. The clear differences between Nymphaea candida versus Nuphar lutea and Nymphaea alba , may be due to adaptations of Nymphaea candida to an Euro-Siberic climate with short-lasting summer conditions.

  12. Electron beam technology for production of preparations of immobilized enzymes

    International Nuclear Information System (INIS)

    Gonchar, A.M.; Auslender, V.L.; Polyakov, V.A.

    1995-01-01

    Possibility of electron beam usage for proteases immobilization on 1,4-polyalkylene oxide (1,4-PAO) was studied to obtain biologically active complex for multi-purpose usage. It is shown that immobilization of Bacillus Subtilis protease is done due to free-radical linking of enzyme and carrier with formation of mycelium-like structures. Immobilization improves heat resistance of enzyme up to 60 centigrade without substrate and up to 80 centigrade in presence of substrate, widens range pH activity in comparison with non-immobilized forms. Immobilized proteases does not contain peroxides and long-live radicals. Our results permitted to create technologies for production of medical and veterinary preparations, active components for wool washing agents and leather fabrication technology

  13. Electronic Nose for Microbiological Quality Control of Food Products

    Directory of Open Access Journals (Sweden)

    M. Falasconi

    2012-01-01

    Full Text Available Electronic noses (ENs have recently emerged as valuable candidates in various areas of food quality control and traceability, including microbial contamination diagnosis. In this paper, the EN technology for microbiological screening of food products is reviewed. Four paradigmatic and diverse case studies are presented: (a Alicyclobacillus spp. spoilage of fruit juices, (b early detection of microbial contamination in processed tomatoes, (c screening of fungal and fumonisin contamination of maize grains, and (d fungal contamination on green coffee beans. Despite many successful results, the high intrinsic variability of food samples together with persisting limits of the sensor technology still impairs ENs trustful applications at the industrial scale. Both advantages and drawbacks of sensor technology in food quality control are discussed. Finally, recent trends and future directions are illustrated.

  14. Production objectives, trait and breed preferences of farmers keeping N'Dama, Fulani Zebu and crossbred cattle and implications for breeding programs.

    Science.gov (United States)

    Traoré, S A; Markemann, A; Reiber, C; Piepho, H P; Valle Zárate, A

    2017-04-01

    Many local livestock breeds in developing countries are being replaced by exotic breeds, leading to a loss of genetic resources. In southern Mali, for the past two decades, a trend towards increasing crossbreeding between the trypanotolerant N'Dama cattle and the trypano-susceptible Fulani Zebu cattle has been taking place. A survey with 160 farmers owning a cattle herd was carried out in southern Mali to investigate their production objectives, as well as trait and breed preferences and correlated socio-economic determinants in order to understand farmers' breeding decisions and to identify comparative advantages of three breed groups (N'Dama, Fulani Zebu and crossbreds) raised in the study area. Data were analyzed using an exploded logit model. The reasons for raising cattle, as well as trait and breed preferences reflected the multiple objectives of the farmers. Draught power and savings were the most important production objectives. Productive traits were ranked highest; farmers reported large body size as the most preferred trait, followed by fertility, draught ability and milk yield. Crossbreds were the favored breed group. Breed preferences were mainly explained by 'resistance to disease' for N'Dama cattle and 'high market price' for Fulani Zebu and crossbred cattle. Production objectives, trait and breed preferences were mainly influenced by farmer group (local farmers and settled transhumants). Local farmers put comparatively more emphasis on livestock functions linked to crop production such as draught power. They had a higher preference for traction ability as a selection trait and preferred N'Dama over Fulani Zebu cattle. Settled transhumants emphasized milk yield as a selection trait and preferred Fulani Zebu over N'Dama. The results indicate that the trend towards more crossbreeding will continue putting the N'Dama breed under high risk of genetic dilution in southern Mali. The N'Dama cattle remain a valuable breed due to their adaptive traits such as

  15. Multivariate analysis of meat production traits in Murciano-Granadina goat kids.

    Science.gov (United States)

    Zurita-Herrera, P; Delgado, J V; Argüello, A; Camacho, M E

    2011-07-01

    Growth, carcass quality, and meat quality data from Murciano-Granadina kids (n=61) raised under three different systems were collected. Canonical discriminatory analysis and cluster analysis of the entire meat production process and its stages were performed using the rearing systems as grouping criteria. All comparisons resulted in significant differences and indicated the existence of three products with different quality characteristics as a result of the three rearing systems. Differences among groups were greater when comparing carcass and meat qualities as compared with growth differences. The paired analyses of canonical correlations among groups of variables integrated in growth, carcass and meat quality, resulted in all being statistically significant, pointing out the canonical correlation coefficient between carcass quality and meat quality. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Evaluation of carcass and muscle traits in Santa Ines female lambs finished with different agricultural products

    Directory of Open Access Journals (Sweden)

    A.M. Menezes

    Full Text Available ABSTRACT The aim of this study was to evaluate the effect of different agricultural products on quantitative aspects of carcass, body constituents, cooking loss, shear force and colorimetry of the Longissimus lumborum and Triceps brachii muscles in Santa Ines lambs. 24 Santa Ines female lambs received one of four diets which were isoproteic and isoenergetic with fixed levels of forage (60% and concentrate (40% of corn and soybean meal during 45 days. The forages per diet differed: coast-cross hay (HAY, cassava hay (CASS, dehydrated by-product of pea crop (PEA and sugarcane (SC. The average weight of the lambs at the beginning of the experiment was 26.35kg. Animals were slaughtered in a federally certified abattoir. Initial and final pH, cooking losses, color using the CIELAB system, shear force and the quantity of sarcomeres per 100μm were measured. Hot carcass, cold and half carcass weights were affected by treatments (P<0.05. The sarcomere length of Triceps brachii muscle 24 hours after slaughter differed between diets and coast-cross hay had the lowest value. The sarcomere length differed significantly between diets and the dehydrated by-product of pea crop had the lowest number of sarcomeres immediately after slaughter compared to other diets. There was no influence of diet on colorimetry, cooking loss and shear force. The decrease in pH followed the development of the process of rigor mortis in the Longissimus lumborum and Triceps brachii muscles in the first hour and up to 24 hours after slaughter. Diets did not alter the pH, water holding capacity, colorimetry or shear force. The pea by-product and sugarcane can replace traditional sources of fodder without depreciation of meat characteristics.

  17. Genetic and phenotypic parameters of productivity traits on the first three lactations in Gyr cattle herds

    Directory of Open Access Journals (Sweden)

    Albuquerque Maria do Socorro Maués

    1999-01-01

    Full Text Available Records of Gyr cows selected for milk production were obtained from the National Gyr Dairy Cattle Breeding Program (Embrapa/CNPGL and analyzed, in order to estimate genetic parameters for the first three lactations and to verify the effects of some environmental factors on milk production from 1979 to 1994. Genetic parameters were estimated by REML with an animal model and a group of fixed effects that included classes of herd, year, season and age at calving. Milk production means and standard deviations were 2,183 kg, 707 kg; 2,682 kg, 762 kg and 2,638 kg, 851 kg, for first, second, and third lactations, respectively. Heritability estimates were 0.20, 0.12, and 0.19 for first, second, and third lactations, respectively, and repeatability was 0.44. Genetic correlation estimates were: 0.68 between first and second lactations, 0.84 between first and third lactations and 1.0 between second and third lactations. Results confirm other research for specialized dairy breeds and firmly suggest that even in breeds of Indian origin the best time to make selection decisions is during the first lactation.

  18. Novel production techniques of radioisotopes using electron accelerators

    Science.gov (United States)

    Lowe, Daniel Robert

    Non-traditional radioisotope production techniques using a compact, high power linear electron accelerator have been demonstrated and characterized for the production of 18F, 47Sc, 147 Pm, and 99mTc from a variety of target candidates. These isotopes are used extensively in the medical field as diagnostic and therapy radioisotopes, as well as the space industry as RTG's. Primary focus was placed on 99mTc as it constitutes approximately 80% of all diagnostic procedures in the medical community that use radioactive tracers. It was also the prime focus due to recent events at the Chalk River nuclear reactor, which caused global shortages of this isotope a few years ago. A Varian K15 LINAC was first used to show proof of principle in Las Vegas. Various samples were then taken to the Idaho Accelerator Center where they were activated using an electron LINAC capable of electron energies from 4 to 25 MeV at a beam power of approximately 1 kW. Production rates, cross sections, and viability studies were then performed and conducted to assess the effectiveness of the candidate target and the maximum production rate for each radioisotope. Production rates for 18F from lithium fluoride salts were shown to be ideal at 21MeV, namely 1.7 Ci per kg of LiF salt, per kW of beam current, per 10 hour irradiation time. As the typical hospital consumption of 18F is around 500 mCi per day, it is clear that a large amount of 18F can be made from a small (300 gram) sample of LiF salt. However, since there is no current separation process for 18F from 19F, the viability of this technique is limited until a separations technique is developed. Furthermore, the calculated cross section for this reaction is in good agreement with literature, which supports the techniques for the isotopes mentioned below. Production rates for 47Sc from vanadium oxide targets were shown to be a maximum at 25 MeV with a production rate of 2 mCi per day, assuming a 2 kW beam and a 10 kg target. While this

  19. Do personality traits related to affect regulation predict other tobacco product use among young adult non-daily smokers?

    Science.gov (United States)

    Brikmanis, Kristin; Petersen, Angela; Doran, Neal

    2017-12-01

    Understanding factors that influence non-cigarette tobacco use is important given these products' prevalence and health risks. The goal of this study was to test the hypothesis that personality traits related to affect regulation would be associated with greater frequency of other tobacco product (OTP) use in a sample of young adult non-daily smokers. Participants (n=518, 51% male) aged 18-24 were non-daily cigarette smokers recruited from the community for a longitudinal study of tobacco use. Personality characteristics (impulsivity, anhedonia, and negative affectivity) were measured at baseline, and participants reported recent tobacco use at baseline and 3, 6, and 9months later. Assessments were conducted online or via mobile phone. Across the 4 assessments, 33-52% of participants reported recent OTP use, with frequency of use decreasing over time. Longitudinal negative binomial regression models indicated that greater sensation seeking and lack of premeditation were associated with more frequent OTP use (psnon-daily cigarette smokers with greater propensity for immediately rewarding behaviors may use OTPs more frequently. Young, non-daily cigarette smokers with high levels of sensation seeking and/or lack of premeditation may be at increased risk for harms related to OTP use and may benefit from prevention and cessation strategies that specifically address affect. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Inbreeding and its effect on some productive traits in buffaloes of South Iran

    Directory of Open Access Journals (Sweden)

    B. Mahmoodi

    2010-02-01

    Full Text Available The buffalo is a native animal of Iran and there were 500,000 buffaloes in Iran that over 80 per cent of its population concentrated in the north and north- west (Azerbaijan province and 18 per cent in the south (Khuzestan province of the country. Buffaloes reread in rural condition as multi purpose animals in Khuzestan. For mating, farmer use owns herd sire also artificial insemination is limited in the rural condition that may be inbred animals so affect the production performance. The aim of this investigation was estimate the inbreeding coefficient and its affect on some production performance. Data of 200 herds were used from the record sheets of herds under recording program of Animal Breeding Center during period 1990 to 2002 in the Khuzestan province. These results showed mostly herds only one sir and rarely two sires have been used. Inbreeding coefficient was 25 percent in some progeny and high-inbred buffaloes had a low performance. According to results of this study it could be concluded that farmers to avoid inbreeding should use other herd sire and artificial insemination also practical recording scheme and genetically selection to genetic improvement should be included in buffaloes of Iran.

  1. Evaluation of heat stress effects on production traits and somatic cell score of Holsteins in a temperate environment.

    Science.gov (United States)

    Hammami, H; Bormann, J; M'hamdi, N; Montaldo, H H; Gengler, N

    2013-03-01

    This study was aimed to evaluate the degree of thermal stress exhibited by Holsteins under a continental temperate climate. Milk, fat, protein, and somatic cell count test-day records collected between 2000 and 2011 from 23,963 cows in 604 herds were combined with meteorological data from 14 public weather stations in Luxembourg. Daily values of 6 different thermal indices (TI) weighted in term of temperature, relative humidity, solar radiation, and wind speed were calculated by averaging hourly TI over 24h. Heat stress thresholds were first identified by a broken-line regression model. Regression models were thereafter applied to quantify milk production losses due to heat stress. The tipping points at which milk and protein yields declined were effectively identified. For fat yield, no valid threshold was identified for any of the studied TI. Daily fat yields tended to decrease steadily with increasing values of TI. Daily somatic cell score patterns were marked by increased values at both lowest and highest TI ranges, with a more pronounced reaction to cold stress for apparent temperature indices. Thresholds differed between TI and traits. For production traits, they ranged from 62 (TI(1)) to 80 (TI(3)) for temperature-humidity indices (THI) and from 16 (TI(5)) to 20 (TI(6)) for apparent temperature indices. Corresponding somatic cell score thresholds were higher and ranged from 66 (TI(1)) to 82 (TI(3)) and from 20 (TI(5)) to 23 (TI(6)), respectively. The largest milk decline per unit of mild, moderate, and extreme heat stress levels of 0.164, 0.356, and 0.955 kg, respectively, was observed when using the conventional THI (TI(1)). The highest yearly milk, fat, and protein losses of 54, 5.7, and 4.2 kg, respectively, were detected by TI(2), the THI index that is adjusted for wind speed and solar radiation. The latter index could be considered as the best indicator of heat stress to be used for forecast and herd management in a first step in temperate regions under

  2. Makeup of the genetic correlation between milk production traits using genome-wide single nucleotide polymorphism information

    NARCIS (Netherlands)

    Binsbergen, van R.; Veerkamp, R.F.; Calus, M.P.L.

    2012-01-01

    The correlated responses between traits may differ depending on the makeup of genetic covariances, and may differ from the predictions of polygenic covariances Therefore, the objective of the present study was to investigate the makeup of the genetic covariances between the well-studied traits: milk

  3. Impact of supplementing diets with propolis on productive performance, egg quality traits and some haematological variables of laying hens.

    Science.gov (United States)

    Abdel-Kareem, A A A; El-Sheikh, T M

    2017-06-01

    One hundred and twenty eight, 28-weeks-old Lohmann LSL hybrid layers were used in this experiment, which lasted 12 weeks to investigate the effect of propolis supplementation on the productive performance, egg quality traits and haematological variables of laying hens. All hens were randomly classified into four equal experimental groups, eight replicates (4 birds/each). Hens in group 1 were fed on a commercial diet and considered as control group, while those in groups 2, 3 and 4 were fed on the same commercial diet and supplemented with 250, 500 and 1000 mg propolis/kg diet. The obtained results revealed that daily feed consumption/hen increased insignificantly with increasing propolis level than that of the control group. Regarding the means of egg mass and egg production rate, it was observed that the laying hens fed diets containing 250 and 1000 mg propolis/kg significantly (p hens as compared to those in the control. Concerning the haematological parameters, the results showed that the levels of total protein and globulin increased significantly with increasing propolis level, while cholesterol and liver enzymes were significantly decreased (p hens in the treated groups significantly decreased, whereas the lymphocyte count significantly increased, resulting in a decreased H/L ratio than that of the control group. Thus, it could be concluded that the supplementation of 250 mg propolis/kg diet is highly recommended to improving egg production, blood constituent and haematological parameters of the commercial laying hens. Journal of Animal Physiology and Animal Nutrition © 2015 Blackwell Verlag GmbH.

  4. Product conveying system for 10 MeV electron beam accelerator for electron beam centre, Kharghar, Navi Mumbai

    International Nuclear Information System (INIS)

    Bandi, L.N.; Lavale, D.S.; Sarma, K.S.S.; Khader, S.A.; Assadullah, M.; Sabharwal, S.

    2003-01-01

    In industrial radiation processing applications using accelerators, product conveying system plays a vital role in exposing the product to high energy electron beam for imparting specified dose to the product and delivering required through puts. The speed of the conveyor corresponds to a definite time of exposure of the product in the radiation zone. Design of suitable conveyor system for a variety of products with differing dose requirements call for a conveyor with wide speed range. This paper discusses the design features of a suitable under beam conveyor system for 10 MeV, 10 kW accelerator for processing a range of products including medical and food products

  5. Freshwater Biological Traits Database (Traits)

    Science.gov (United States)

    The traits database was compiled for a project on climate change effects on river and stream ecosystems. The traits data, gathered from multiple sources, focused on information published or otherwise well-documented by trustworthy sources.

  6. A stochastic model for the derivation of economic values and their standard deviations for production and functional traits in dairy cattle

    DEFF Research Database (Denmark)

    Nielsen, Hanne-Marie; Groen, A F; Østergaard, Søren

    2006-01-01

    The objective of this paper was to present a model of a dairy cattle production system for the derivation of economic values and their standard deviations for both production and functional traits under Danish production circumstances. The stochastic model used is dynamic, and simulates production...... was -0.94 €/day per cow-year. Standard deviations of economic values expressing variation in realised profit of a farm before and after a genetic change were computed using a linear Taylor series expansion. Expressed as coefficient of variation, standard deviations of economic values based on 1000...

  7. Effect of two different plant growth regulators on production traits of sunflower

    Directory of Open Access Journals (Sweden)

    Dávid ERNST

    2016-12-01

    Full Text Available The plant growth regulators (PGR are an organic compounds that modify plant physiological processes. PGR applied to the field crops promotes photosynthesis, stimulates plant growth, improves flowering and protects plants against unfavourable year weather conditions. Listed is an assumption to the yield of high quality. The effects of year weather conditions, biological material (hybrids and foliar application of two different PGR (Terra-Sorb® Foliar – containing free amino acids and Unicum® – containing Abiestins® on the yield-forming parameters, seed yield and the oil content in seeds of three selected hybrids of sunflower (NK Brio, NK Neoma, NK Ferti were studied in this paper. The field poly-factorial experiments were realized during two growing seasons of 2012 and 2013. The experimental area is situated in the maize-growing region (climatic region: warm; climatic sub-region: mild dry or dry; climatic zone: warm and dry, with mild winter and long sunshine and soil is silt loam Haplic Luvisol. The climatic conditions in chosen experimental years were different in quantities and distribution of precipitation at main growth period of sunflower plants (June to August and allows evaluating the yield stability between used hybrids and foliar treatments. The results showed that the application of selected PGR has contributed to an increase of sunflower seed yield, mainly through increase the weight of thousand seeds (rp = 0.761; P < 0.001. Similarly, oil content in seeds was significantly higher in treatments with PGR, especially with preparation Terra-Sorb® Foliar containing free amino acids. The study describes the relationship between quality (oil content in seeds and quantity (seed yield of sunflower production (rp = ‒0.41; P < 0.01. Results showed that PGR can be an important rationalization tool of the sunflower cultivation technology.

  8. Polymorphism of Microsatellite markers and ‎Their Association with Egg Production Traits in ‎Iraqi Chickens

    Directory of Open Access Journals (Sweden)

    Israa Luay AL-jaryan

    2017-12-01

    Full Text Available The present study was conducted on local Iraqi chickens and two strains of commercial laying hens (ISA Brawn and Ross Hen as control. To estimate genetic Diversity using microsatellites and their association with egg production traits, three microsatellites markers, located on 1, 5 and E5C10 chromosomes were used in pesent study. A total of 100 varieties of three chicken populations were genotyped for three microsatellite markers by polymerase chain reaction (PCR to evaluate the genetic Diversity (GD among populations using Nei Index similarity mean.  The present study show that local chicken populations were more diverse than control populations. Genetic Diversity among populations was obtained using Nei Index similarity mean. The present results indicate that the Highest GD among local chickens (0.82 and the lowest GD (0.4 and when comper local chickens with control strains found that the highest GD was (0.76 when comper with ISA Brawn, and (0.702 when comper the study population with Ross Hen strain and the lowest GD was (0.673 when comper with ISA Brawn strain, (0.661 when comper the study population with Ross Hen  strain, that’s mean the Three microsatellite genetic markers applied in the present study success to reveal high degree of similarity among the three population used here. The genetic distance revealed that local chickens are mostly related to ISA Brawn strain more than Ross Hen strain

  9. Makeup of the genetic correlation between milk production traits using genome-wide single nucleotide polymorphism information.

    Science.gov (United States)

    van Binsbergen, R; Veerkamp, R F; Calus, M P L

    2012-04-01

    The correlated responses between traits may differ depending on the makeup of genetic covariances, and may differ from the predictions of polygenic covariances. Therefore, the objective of the present study was to investigate the makeup of the genetic covariances between the well-studied traits: milk yield, fat yield, protein yield, and their percentages in more detail. Phenotypic records of 1,737 heifers of research farms in 4 different countries were used after homogenizing and adjusting for management effects. All cows had a genotype for 37,590 single nucleotide polymorphisms (SNP). A bayesian stochastic search variable selection model was used to estimate the SNP effects for each trait. About 0.5 to 1.0% of the SNP had a significant effect on 1 or more traits; however, the SNP without a significant effect explained most of the genetic variances and covariances of the traits. Single nucleotide polymorphism correlations differed from the polygenic correlations, but only 10 regions were found with an effect on multiple traits; in 1 of these regions the DGAT1 gene was previously reported with an effect on multiple traits. This region explained up to 41% of the variances of 4 traits and explained a major part of the correlation between fat yield and fat percentage and contributes to asymmetry in correlated response between fat yield and fat percentage. Overall, for the traits in this study, the infinitesimal model is expected to be sufficient for the estimation of the variances and covariances. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  10. 78 FR 52211 - Certain Electronic Devices Having Placeshifting or Display Replication and Products Containing...

    Science.gov (United States)

    2013-08-22

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-878] Certain Electronic Devices Having Placeshifting or Display Replication and Products Containing Same; Commission Determination Not To Review an... States after importation of certain electronic devices having placeshifting or display replication...

  11. Electron beam treatment parameters for control of stored product insects

    International Nuclear Information System (INIS)

    Cleghorn, D.A.; Nablo, S.V.; Ferro, D.N.; Hagstrum, D.W.

    2002-01-01

    The fluidized bed process (EBFB) has been evaluated for the disinfestation of cereal grains. The various life stages from egg to adult have been studied on the 225 kV pilot as a function of surface dose. Three of the most common pests were selected: the rice weevil (S. oryzae), the lesser grain borer (R. dominica) and the red flour beetle (T. castaneum). The major challenge to this process lies in those 'protected' life-stages active deeply within the endosperm of the grain kernel. The rice weevil is such an internal feeder in which the larvae develop through several molts during several weeks before pupation and adult emergence. Product velocities up to 2000 m/min have been used for infested hard winter wheat at dose levels up to 1000 Gy. Detailed depth of penetration studies at three life stages of S. oryzae larvae were conducted at 225-700 kV and demonstrated effective mortality at 400 kVx200 Gy. Mortality data are also presented for the radiation labile eggs of these insects as well as the (sterile) adults, which typically lived for several weeks before death. These results are compared with earlier 60 Co gamma-ray studies on these same insects. Based upon these studies, the effectiveness of the fluidized bed process employing self-shielded electron beam equipment for insect control in wheat/rice at sub-kilogray dose levels has been demonstrated

  12. Production and Studies of Photocathodes for High Intensity Electron Beams

    CERN Document Server

    Chevallay, E; Legros, P; Suberlucq, Guy; Trautner, H

    2000-01-01

    For short, high-intensity electron bunches, alkali-tellurides have proved to be a reliable photo-cathode material. Measurements of lifetimes in an rf gun of the CLIC Test Facility II at field strengths greater than 100 MV/m are presented. Before and after using them in this gun, the spectral response of the CS-Te and Rb-Te cathodes were determined with the help of an optical parametric oscillator. The behaviour of both materials can be described by Spicer's 3-step model. Whereas during the use the threshold for photo-emission in Cs-Te was shifted to higher proton energies, that of Rb-Te did not change. Our latest investigations on the stoichiometric ratio of the components are shown. The preparation of the photo-cathodes was monitored with 320 nm wavelength light , with the aim of improving the measurement sensitivity. The latest results on the protection of Cs-Te cathode surfaces with CsBr against pollution are summarized. New investigations on high mean current production are presented.,

  13. Convoy electron production by heavy ions in solids

    International Nuclear Information System (INIS)

    Sellin, I.A.

    1984-01-01

    The term convoy electron refers to those electrons ejected in fast ion-atom and ion-solid collisions closely matched in vector velocity to that of the incident heavy particles responsible for their ejection. Similarities and differences among electrons ejected into such states through binary electron capture to continuum and electron loss to continuum processes in single ion-atom encounters are compared and contrasted to more complex ejection processes occurring in solid targets. Puzzles posed by the apparent strong projectile Z dependence but weak emergent ion charge dependence of the yield in the case of solid targets are reviewed. Very recent progress in resolving these puzzles has been made by recent observations that the apparent mean free path for electron scattering out of the forward direction within the target is observed to be an order of magnitude greater than that for free electrons of equal velocity provided the projectile charge is high. 13 references, 2 figures, 1 table

  14. Inbreeding and it is effects on some productive and reproductive traits in a herd of Egyptian buffaloes

    Directory of Open Access Journals (Sweden)

    A.M. Kawthar

    2010-02-01

    Full Text Available A total of 1551 normal lactation records of Egyptian buffaloes, Kept at Mehallet Mousa Farm, belonging to Ministry of Agriculture, during the period from 1960 to 2001 were used. Milk yield, lactation period and age at first calving were studied in order to determine the presence of inbreeding in the herd and to evaluate it is effects as well as the effects of some environmental factors on these traits. In addition, genetic parameters of these traits are also studied. Milk yield, lactation period and age at first calving averaged 1193 ± 522 kg, 282±125 and 39 ± 3 mo, respectively. Among all three traits, only age at first calving was affected by inbreeding. Month of calving and year of calving had a significant effect on all traits studied, while age at first calving had no significant effect on milk yield and lactation period.

  15. Production of accelerated electrons near an electron source in the plasma resonance region

    International Nuclear Information System (INIS)

    Fedorov, V.A.

    1989-01-01

    Conditions of generation of plasma electrons accelerated and their characteristics in the vicinity of an electron source are determined. The electron source isolated electrically with infinitely conducting surface, being in unrestricted collisionless plasma ω 0 >>ν, where ω 0 - plasma frequency of nonperturbated plasma, ν - frequency of plasma electron collisions with other plasma particles, is considered. Spherically symmetric injection of electrons, which rates are simulated by ω frequency, occurs from the source surface. When describing phenomena in the vicinity of the electron source, one proceeds from the quasihydrodynamic equation set

  16. Production of runaway electrons by negative streamer discharges

    DEFF Research Database (Denmark)

    Chanrion, Olivier Arnaud; Neubert, Torsten

    2010-01-01

    thunderstorms, the so-called Terrestrial Gamma-Ray Flashes. The radiation is thought to be bremsstrahlung from energetic (MeV) electrons accelerated in a thunderstorm discharge. The observation goes against conventional wisdom that discharges in air are carried by electrons with energies below a few tens of e...... and the conditions on the electric field for the acceleration of electrons into the runaway regime. We use particle codes to describe the process of stochastic acceleration and introduce a novel technique that improves the statistics of the relatively few electrons that reach high energies. The calculation...

  17. Electronics

    Science.gov (United States)

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  18. Study of electron beam production by a plasma focus

    International Nuclear Information System (INIS)

    Smith, J.R.; Luo, C.M.; Rhee, M.J.; Schneider, R.F.

    1983-01-01

    A preliminary investigation of the electron beam produced by a plasma focus device using a current charged transmission line is described. Electron beam currents as high as 10 kA were measured. Interaction of the extracted beam and the filling gas was studied using open shutter photography

  19. Contribution of semen trait selection, artificial insemination technique, and semen dose to the profitability of pig production systems: A simulation study.

    Science.gov (United States)

    Gonzalez-Pena, Dianelys; Knox, Robert V; Rodriguez-Zas, Sandra L

    2016-01-15

    The economic impact of selection for semen traits on pig production systems and potential interaction with artificial insemination (AI) technique and semen dose remains partially understood. The objectives of this study were to compare the financial indicators (gross return, net profit, cost) in a three-tier pig production system under one of two selection strategies: a traditional strategy including nine paternal and maternal traits (S9) and an advanced strategy that adds four semen traits (S13). Maternal traits included the number of pigs born alive, litter birth weight, adjusted 21-day litter weight, and the number of pigs at 21 days, and paternal traits included days to 113.5 kg, back fat, average daily gain, feed efficiency, and carcass lean percentage. The four semen traits included volume, concentration, progressive motility of spermatozoa, and abnormal spermatozoa. Simultaneously, the impact of two AI techniques and a range of fresh refrigerated semen doses including cervical AI with 3 × 10(9) (CAI3) and 2 × 10(9) (CAI2) sperm cells/dose, and intrauterine AI with 1.5 × 10(9) (IUI1.5), 0.75 × 10(9) (IUI0.75), and 0.5 × 10(9) (IUI0.5) sperm cells/dose were evaluated. These factors were also evaluated using a range of farrowing rates (60%-90%), litter sizes (8-14 live-born pigs), and a selected semen collection frequency. The financial impact of the factors was assessed through simulation of a three-way crossbreeding system (maternal nucleus lines A and B and paternal nucleus line C) using ZPLAN. The highest return on investment (profit/cost) of boars was observed at 2.33 collections/wk (three periods of 24 hours between collections). Under this schedule, a significant (P profit. The highest gross return was obtained under S13 with IUI0.75 and IUI0.5. The net profit of S13 was 34.37% higher than the traditional S9 (P profit favored IUI0.5 with relative differences of 4.13%, 2.41%, 1.72%, and 0.43% compared to CAI3, CAI2, IUI1.5, and IUI0

  20. Polymorphisms of POU1F1 and STAT5A genes and their associate on with milk production traits in cattle

    Directory of Open Access Journals (Sweden)

    Sonia Zakizadeh

    2015-04-01

    Full Text Available Specific trait candidate genes are sequenced genes with known biological activity. The effects of POU1F1 and STAT5A on milk production traits have been studied in several studies. POU1F1 affects on transcription of prolactin and growth hormone gene, as well as, STAT5A is known as a main mediator of growth hormone action on target genes and intracellular mediator of prolactin signaling. Since these genes are essential for development of mammary system, the aim of this study was to determine association of their polymorphism with milk production breeding values in Brown Swiss cattle. Blood of ninety milking cow were randomly obtained. DNA was extracted from whole blood using modified salting out method, then the desired fragments were PCR amplified and digested by specific restriction endonuclease enzymes. Gene and genotype frequencies, heterozygosity indexes, the real and effective allele number were calculated by PopGene software; and the breeding values of production traits were estimated by DFREML. SAS software was used to analyze association between genotypes and breeding values. The frequency of 'A' and 'C' alleles of POU1F1 and STAT5A were 0.455 and 0.489, respectively. This population was in hardy-weinburg equilibrium for both loci. There was no significant association between genotypes and breeding values, although POU1F1*B tended to produce higher milk and POU1F1*A showed higher fat and protein percent.

  1. Analysis of single nucleotide polymorphisms in major and candidate genes for production traits in Nero Siciliano pig breed

    Directory of Open Access Journals (Sweden)

    Alessandro Zumbo

    2010-01-01

    Full Text Available Nero Siciliano (NS; Sicilian Black is a local pig breed reared on the island of Sicily mainly under extensive management.The breed is well adapted to marginal conditions and is appreciated for its reproductive performance, disease resistanceand production of tasty meat. For a genetic characterization of this breed we analyzed the allele frequencies of singlenucleotide polymorphisms (SNPs in eight major or candidate genes (ryanodine receptor 1, RYR1; Na+, K+ ATPase subunitα 2, ATP1A2; myosin heavy chain 2B, MYH4; sarcolipin, SLN; cathepsin B, CTSB; cystatin B, CSTB; estrogen receptor,ESR; melanocortin receptor 1, MC1R for performance and phenotypic traits. The animals that were sampled andanalyzed represent about 6-8% of the total NS pig population. PCR-RFLP or PCR-SSCP techniques were used to type theDNA markers in the selected loci. Exact test of Hardy-Weinberg equilibrium was computed for each locus, Fis statisticsand heterozygosity were calculated for each locus and over all loci. Allele frequencies obtained in NS breed were comparedto the frequencies already available in literature for the Large White, Landrace, Duroc, Belgian Landrace, Piétrain,Hampshire and Meishan breeds. For the ESR locus, as no information on the distribution of the two alleles were available,we typed a sample of unrelated pigs from the considered breeds.Even if only eight loci were studied in NS breed, important elements were obtained from the data. The 1843T (n alleleat the RYR1 locus is present in NS breed, thus the molecular test to identify the carriers of this allele should be adoptedto avoid its spreading in the population. Moreover, other studies are needed to clarify the allelic structure of the MC1Rgene, which affects coat color, in order to evaluate if this gene could be used in genetic tests for the traceability of themeat products of this breed. Finally, the present work represents an attempt to evaluate data on mutations within majorand candidate genes

  2. 76 FR 72439 - Certain Consumer Electronics and Display Devices and Products Containing Same; Receipt of...

    Science.gov (United States)

    2011-11-23

    ... INTERNATIONAL TRADE COMMISSION [DN 2858] Certain Consumer Electronics and Display Devices and.... International Trade Commission has received a complaint entitled In Re Certain Consumer Electronics and Display... importation of certain consumer electronics and display devices and products containing same. The complaint...

  3. 77 FR 14422 - Certain Consumer Electronics and Display Devices and Products Containing Same; Notice of Receipt...

    Science.gov (United States)

    2012-03-09

    ... INTERNATIONAL TRADE COMMISSION [DN 2882] Certain Consumer Electronics and Display Devices and... the U.S. International Trade Commission has received a complaint entitled Certain Consumer Electronics... importation of certain consumer electronics and display devices and products containing same. The complaint...

  4. 77 FR 21584 - Certain Consumer Electronics and Display Devices and Products Containing Same; Institution of...

    Science.gov (United States)

    2012-04-10

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-836] Certain Consumer Electronics and Display... electronics and display devices and products containing same by reason of infringement of certain claims of U... importation, or the sale within the United States after importation of certain consumer electronics and...

  5. A robust yellow-emitting metallophosphor with electron-injection/-transporting traits for highly efficient white organic light-emitting diodes.

    Science.gov (United States)

    Zhou, Guijiang; Yang, Xiaolong; Wong, Wai-Yeung; Wang, Qi; Suo, Si; Ma, Dongge; Feng, Jikang; Wang, Lixiang

    2011-10-24

    With the aim of endowing triplet emitters in the development of organic light-emitting devices (OLEDs) with electron-injection/-transporting (EI/ET) features, the phenylsulfonyl moiety was introduced into the phenyl ring of a 2-phenylpyridine (Hppy) ligand and the yellow phosphorescent heteroleptic iridium(III) complex 1 was developed. It was shown that the SO(2)Ph unit could provide EI/ET character to 1, as indicated from both electrochemical and computational data. Complex 1 is a promising yellow-emitting material for both monochromatic OLEDs and white OLEDs (WOLEDs). The outstanding electronic traits associated with 1, coupled with careful device design, afforded very attractive electroluminescent performances for two-element WOLEDs, including a low turn-on voltage of less than 3.7 V, a maximum brightness of 48,000 cd m(-2), an external quantum efficiency of 13.0%, a luminance efficiency of 34.7 cd A(-1), and a power efficiency of 24.3 Lm W(-1). In addition, a good color rendering index (CRI) of about 74, a stable white color with a Commission Internationale de L'Eclairage (CIE(x,y)) variation of Δ(x, y) OLED research. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Direct electron production measurements by DELCO at SPEAR

    International Nuclear Information System (INIS)

    Kirkby, J.; Stanford Univ., Calif.

    1977-01-01

    We have observed weakly-produced electrons in e + e - annihilations above Esub(c.m.) approximately 3.75 GeV. In the course of a scan through this threshold region we observed the 3 D 1 state of charmonium with a mass 3770+-6 MeV/c 2 , width GAMMA = 24+-5 MeV and partial width to electron pairs GAMMAsub(ee) = 180+-60 eV. This resonance (named PSI'(3770)) provides a value for the D semileptonic branching ratio of 11+-3%. On the assumption of the Cabibbo nature involved, the PSI' electron momentum spectrum indicates a substantial contribution from the mode D→Kev. A comparison of the events having only two visible prongs (of which only one is an electron) with the heavy lepton hypotheses shows no disagreement. Alternative hypotheses have not yet been investigated. (orig.) [de

  7. 78 FR 19182 - Electronic Filing of Import Inspection Applications for Meat, Poultry, and Egg Products...

    Science.gov (United States)

    2013-03-29

    ...] Electronic Filing of Import Inspection Applications for Meat, Poultry, and Egg Products: Availability of..., and egg products through the Automated Commercial Environment (ACE). ACE is the Web- based portal for... products (21 U.S.C. 620, 466). The Egg Products Inspection Act (EPIA) (21 U.S.C. 1031 et seq.) prohibits...

  8. 77 FR 31876 - Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not...

    Science.gov (United States)

    2012-05-30

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-836] Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not To Review Initial Determination To Amend... electronics and display devices and products containing the same by reason of infringement of U.S. Patent Nos...

  9. Supply chain implications of sustainable design strategies for electronics products

    OpenAIRE

    De Coster, R; Bateman, RJ; Plant, AVC

    2012-01-01

    Increasing legislative and consumer pressures on manufacturers to improve sustainability necessitates that manufacturers consider the overall life cycle and not be scope restricted in creating products. Product strategies to improve sustainability have design implications as many of the decisions made during the design stage will then determine the environmental performance of the final product. Coordination across the supply chain is potentially beneficial as products with improved energy ef...

  10. Plasma production for electron acceleration by resonant plasma wave

    International Nuclear Information System (INIS)

    Anania, M.P.; Biagioni, A.; Chiadroni, E.; Cianchi, A.; Croia, M.; Curcio, A.; Di Giovenale, D.; Di Pirro, G.P.; Filippi, F.; Ghigo, A.; Lollo, V.; Pella, S.; Pompili, R.; Romeo, S.; Ferrario, M.

    2016-01-01

    Plasma wakefield acceleration is the most promising acceleration technique known nowadays, able to provide very high accelerating fields (10–100 GV/m), enabling acceleration of electrons to GeV energy in few centimeter. However, the quality of the electron bunches accelerated with this technique is still not comparable with that of conventional accelerators (large energy spread, low repetition rate, and large emittance); radiofrequency-based accelerators, in fact, are limited in accelerating field (10–100 MV/m) requiring therefore hundred of meters of distances to reach the GeV energies, but can provide very bright electron bunches. To combine high brightness electron bunches from conventional accelerators and high accelerating fields reachable with plasmas could be a good compromise allowing to further accelerate high brightness electron bunches coming from LINAC while preserving electron beam quality. Following the idea of plasma wave resonant excitation driven by a train of short bunches, we have started to study the requirements in terms of plasma for SPARC-LAB (Ferrario et al., 2013 [1]). In particular here we focus on hydrogen plasma discharge, and in particular on the theoretical and numerical estimates of the ionization process which are very useful to design the discharge circuit and to evaluate the current needed to be supplied to the gas in order to have full ionization. Eventually, the current supplied to the gas simulated will be compared to that measured experimentally.

  11. Plasma production for electron acceleration by resonant plasma wave

    Energy Technology Data Exchange (ETDEWEB)

    Anania, M.P., E-mail: maria.pia.anania@lnf.infn.it [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Biagioni, A.; Chiadroni, E. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Cianchi, A. [University of Rome Tor Vergata - INFN, via della Ricerca Scientifica, 1, 00133 Roma (Italy); INFN, Via della Ricerca Scientifica, 1, 00133 Roma (Italy); Croia, M.; Curcio, A. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Di Giovenale, D.; Di Pirro, G.P. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Filippi, F. [University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Ghigo, A.; Lollo, V.; Pella, S.; Pompili, R. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Romeo, S. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Ferrario, M. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy)

    2016-09-01

    Plasma wakefield acceleration is the most promising acceleration technique known nowadays, able to provide very high accelerating fields (10–100 GV/m), enabling acceleration of electrons to GeV energy in few centimeter. However, the quality of the electron bunches accelerated with this technique is still not comparable with that of conventional accelerators (large energy spread, low repetition rate, and large emittance); radiofrequency-based accelerators, in fact, are limited in accelerating field (10–100 MV/m) requiring therefore hundred of meters of distances to reach the GeV energies, but can provide very bright electron bunches. To combine high brightness electron bunches from conventional accelerators and high accelerating fields reachable with plasmas could be a good compromise allowing to further accelerate high brightness electron bunches coming from LINAC while preserving electron beam quality. Following the idea of plasma wave resonant excitation driven by a train of short bunches, we have started to study the requirements in terms of plasma for SPARC-LAB (Ferrario et al., 2013 [1]). In particular here we focus on hydrogen plasma discharge, and in particular on the theoretical and numerical estimates of the ionization process which are very useful to design the discharge circuit and to evaluate the current needed to be supplied to the gas in order to have full ionization. Eventually, the current supplied to the gas simulated will be compared to that measured experimentally.

  12. Fine-scale coexistence patterns along a productivity gradient in wet meadows: shifts from trait convergence to divergence

    Czech Academy of Sciences Publication Activity Database

    Mudrák, Ondřej; Janeček, Štěpán; Götzenberger, Lars; Mason, N. W. H.; Horník, J.; de Castro, I.; Doležal, Jiří; Klimešová, Jitka; de Bello, Francesco

    2016-01-01

    Roč. 39, č. 3 (2016), s. 338-348 ISSN 0906-7590 R&D Projects: GA ČR GAP505/12/1296 Institutional support: RVO:67985939 Keywords : coexistence * management * functional traits Subject RIV: EH - Ecology, Behaviour Impact factor: 4.902, year: 2016

  13. Integrating Emotional Attachment and Sustainability in Electronic Product Design

    Directory of Open Access Journals (Sweden)

    Alex Lobos

    2013-03-01

    Full Text Available Current models for Information and Communication Technology (ICT products encourage frequent product replacement with newer versions that offer only minor incremental improvements. This pattern, named planned obsolescence, diminishes user experience and shortens product lifespan. This paper presents the conceptual basis for a two-part integrated approach to combating planned obsolescence in ICT devices. First, design for emotional attachment, which creates products that users enjoy, value, and use for longer. Second, technological adaptability, which anticipates product upgrades and repairs as new technologies emerge. A model interdisciplinary design course in industrial design and sustainability, also described herein, trains students to apply this approach to create innovative ICT products with smaller environmental footprints.

  14. To the problem of electron beam production in plasma diodes

    International Nuclear Information System (INIS)

    Korenev, S.A.

    1982-01-01

    The results of exprriments on electrOn beam generation from plasma emitting surfaces formed by incompleted charged over the dielectric surface, sliding charge over the dielectric surface covered with a layer of barium oxide, discharge due to explosion-emission effects. The experiments have shown that the formed plasma of sliding discharge and discharge in explosion-emission effects is rather homogeneous and the electron beam has the current density homogeneity in the transverse cross section of approximation 20%. At the diode voltage of 150-300 kV the density of electron current for diodes with cathode on the basis of the sliding charge is approximately 0.4-1.0 kA/cm 2 , while for diodes with cathode made of graphite with metallic grid it is approximately 0.5-1.3 kA/cm 2 . The average gap between anode and cathode is 1 cm for both cases

  15. Big data to optimise product strategy in electronic industry

    OpenAIRE

    Khan, Nawaz; Lakshmi Sabih, Vijay; Georgiadou, Elli; Repanovich, Angela

    2016-01-01

    This research identifies the success factors for new product development and competitive advantage as well as argues how big data can expedite the process of launching a new product initiative. By combining the research findings and the patterns of background theories, an inquisitive framework for the new product development and competitive advantage is proposed. This model and framework is a prototype, which with the aid of scenario recommends the parsimonious and an unified way to elucidate...

  16. Study on Effects of Electron Donors on Phosphine Production from Anaerobic Activated Sludge

    Directory of Open Access Journals (Sweden)

    Jianping Cao

    2017-07-01

    Full Text Available The effects of different types and concentrations of electron donors (glucose, starch, methanol and sodium acetate on the formation of phosphine from anaerobic activated sludge that has been domesticated for a prolonged period were studied in small batch experiments. The results show that types and concentrations of electron donor have significant effects on the production of phosphine from anaerobic activated sludge. Among them, glucose was the most favourable electron donor, whereas sodium acetate was the least favourable electron donor for the removal of phosphorus and the production of phosphine. Higher concentrations of electron donors were more favourable for the reduction of phosphate into phosphine, and supplying more than nine times the amount of electron donor as theoretically required for the reduction of phosphate into phosphine was favourable for the production of phosphine.

  17. Counterfeit Electronic Cigarette Products with Mislabeled Nicotine Concentrations.

    Science.gov (United States)

    Omaiye, Esther E; Cordova, Iliana; Davis, Barbara; Talbot, Prue

    2017-07-01

    We compared nicotine concentrations in one brand of refill fluids that were purchased in 4 countries and labeled 0 mg of nicotine/mL. We then identified counterfeit e-cigarette products from these countries. Overall, 125 e-cigarette refill fluids were purchased in Nigeria, the United States (US), England, and China. Nicotine concentrations were measured using high performance liquid chromatography and compared to labeled concentrations. Refill fluids were examined to identify physical differences and grouped into authentic and counterfeit products. Whereas nicotine was in 51.7% (15/29) of the Nigerian, 3.7% (1/27) of the Chinese and 1.6% (1/61) of the American refill fluids (range = 0.4 - 20.4 mg/mL), 8 British products did not contain nicotine. Products from China, the US, and Nigeria with trace amounts of nicotine (0.4 to 0.6 mg/mL) were authentic; however, all products from Nigeria with more than 3.7 mg/mL were counterfeit. We introduce 2 novel issues in the e-cigarette industry, the production of counterfeit refill fluids under a brandjacked label and inclusion of nicotine in 81.3% of the counterfeit products labeled 0 mg/mL. This study emphasizes the need for better control and monitoring of nicotine containing products and sales outlets.

  18. Green development within product families, Electronics goes green 2000+ conference

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Willum, Ole; Frees, Niels

    2001-01-01

    , based on environ-mental and economical importance as well as the existence of several producers. Using this method, five families have been selected, namely mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting and ventilation. Collaboration with 5 industrial companies has...

  19. Mechanisms for the production of harmonics in free electron lasers

    NARCIS (Netherlands)

    Elgin, J.N.; Penman, C.

    1991-01-01

    Harmonics in the radiation of a free electron laser are useful for extending the range of tuning, may originate in spontaneous or parametric processes, and can take part in stimulated emission or amplification. These mechanisms exhibit interesting analogies with those of nonlinear optics. Apart from

  20. Superparticle production in high-energy electron-proton collisions

    International Nuclear Information System (INIS)

    Boldyshev, V.F.; Rekalo, M.P.; Stoletnij, I.V.

    1987-01-01

    The analytical formulae for total and differential cross sections of the ep → e-tildeγ-tilde process, taking into account the polarization of both initial beams, are obtained. It is shown that the employment of longitudinally polarized initial beams provides a tool for varying relative contributions of left and right electrons superpartners and detecting their mass difference

  1. INFLUENCE OF DIETARY SELENIUM SUPPLEMENTATION OF EWES ON PRODUCTION TRAITS, ANTIOXIDANT STATUS AND METABOLIC PROFILE OF LAMBS

    Directory of Open Access Journals (Sweden)

    Josip Novoselec

    2013-12-01

    Full Text Available The aim of this study was to determine the effect of dietary selenium supplementation (organic, inorganic of high pregnant ewes on the production traits of lambs, the concentration of selenium in the blood of ewes and their lambs, indicators of antioxidant status in the blood of ewes and their lambs, the metabolic profile of ewes and their lambs and concentrations of thyroid hormones. Ewes were in the last third of pregnancy, the average age of four years, healthy and in good condition, divided into three groups of 10 animals. The research lasted 4 months respectively, 2 months with ewes during high pregnancy, 2 months with ewes during lactation and on their lambs during suckling period. Ewes ration from control group one was composed from 300 g/day/animal feed mixture without addition of selenium and 150 g/day/animal barley and alfalfa hay that they had ad libitum. Feed mixture from second group of ewes was supplemented with 0.3 mg/kg organic form of selenium (Sel-Plex®, and feed mixture from third group with the same amount inorganic form of selenium (sodium selenite. Selenium supplementation of ewes feed mixture did not significantly influence on the production traits of their lambs postpartum. Selenium supplementation of ewes and their lambs had influence on a significant (P<0.01; P<0.05 increase in the concentration of selenium, GSH-Px and SOD in whole blood compared to control group of ewes. Organic selenium supplement had a more significant impact on the increase in concentration of selenium and GSH-Px in the blood. In the ewes and lambs blood was determined decrease of MDA with increasing concentrations of selenium in the blood. Generally, the selenium supplementation led to an increase (P<0.05 in the number of WBC and lymphocytes in the blood of ewes and lambs. Also, the increase in the number of RBC, HGB content and MCV in lambs and MCH as well as MCHC in ewes that had a selenium supplement in feed mixture were determined

  2. Laying traits and underlying transcripts, expressed in the hypothalamus and pituitary gland, that were associated with egg production variability in chickens.

    Science.gov (United States)

    Chen, Chih-Feng; Shiue, Yow-Ling; Yen, Cheng-Ju; Tang, Pin-Chi; Chang, Hui-Chiu; Lee, Yen-Pai

    2007-12-01

    The objective was to characterize the potential laying traits and underlying transcripts expressed in the hypothalamus and pituitary gland that were associated with egg production variability in five genetic stocks of chickens: two commercial lines, Red- (n=12) and Black-feather (n=14) Taiwan country chickens (TCCs); two selected lines of TCCs, B (high body weight/comb size; n=17) and L2 (high-egg production; n=14); and a commercial single comb White Leghorn (WL; n=17). Six laying traits, age at first egg, clutch length, pause length, oviposition lag within clutch, follicle rapid growth period, and rate of yolk accumulation were measured. The significance of differential values among five chicken stocks and correlation coefficients between laying traits and number of eggs to 50 weeks of age or laying rate after first egg, and the expression level of 33 transcripts were determined. Longer clutch length and shorter oviposition lag within clutch contributed to a higher number of eggs to 50 weeks of age or laying rate after first egg in L2 (Pdifferent, indicating the accumulation of different alleles after long-term, independent selection. Across all five strains, numbers of eggs to 50 weeks of age were positive correlated with average clutch length (P<0.05) as well as the rate of yolk accumulation (P<0.05). Expressions of PLAG1, STMN2, PGDS, PARK7, ANP32A, PCDHA@, SCG2, BDH and SAR1A transcripts contributed to number of eggs to 50 weeks of age (P<0.05) or laying rate after first egg (P<0.05). Analysis of correlation coefficients indicated that PLAG1 additionally played roles in decreasing average pause length. Two transcripts, PRL and GARNL1, specifically contributed to number of eggs to 50 weeks of age or laying rate after first egg by reducing oviposition lag within clutch (P<0.05) and/or increasing average clutch length (P<0.05), respectively. Expression level of NCAM1, contributed to laying rate after first egg by association with a shorter oviposition lag within

  3. THE EFFECT OF PRODUCTION SYSTEM AND WEANING ON LAMB CARCASS TRAITS AND MEAT CHARACTERISTICS OF AUTOCHTHONOUS JEZERSKO-SOLČAVA BREED

    Directory of Open Access Journals (Sweden)

    Angela Cividini

    2007-06-01

    Full Text Available Thirty-two Jezersko-Solčava lambs were used in a 2X2 factorial design to evaluate the effect of production system (fattening in stable with hay and cereals ad libitum or on the pasture and weaning (suckling or weaned lambs on carcass and meat traits of lambs. Suckling lambs were slaughtered at 125 days of age (30 kg of live weight and weaned lambs were slaughtered at 165 days (38 kg of live weight. No significant differences in daily gain and dressing percentage compared to the production system or weaning were observed. Lambs from pasture had greater percentage of liver, heart and spleen. They had longer and wider carcasses and lower carcass fatness as indicated by lower percentage of kidney fat (1.16 vs. 1.99 and lower percentage of fat in leg than lambs from stable. They also had higher percentage of shoulder and leg and lower percentage of back, loin and rib with flank. Production system also affected meat color. Lambs from pasture had higher CIE L, a and b values of Longissimus dorsi muscle. Mostly, weaning influenced carcass fatness and related traits. Suckling lambs had lower fatness score (4.94 vs. 6.25, lower percentage of kidney fat and fat in leg (8.66 vs. 10.31 and lower percentage of rib with flank than weaned lambs. Meat from suckling lambs was also of lighter colour. There was no significant interaction between production system and weaning on studied carcass or meat traits.

  4. Anticipating Soft Problems with Consumer Electronic Products : How do soft problems interact with user characteristics and product properties?

    NARCIS (Netherlands)

    Kim, C.

    2012-01-01

    Over the last decade consumer electronic product industries have been confronted with an increase in consumer complaints. Interestingly about half of the reasons for product return are based on so called ‘soft problems’, consumer complaints that cannot be traced back to technical problems. Probably

  5. Cusp electron production in 75--300 keV He+ + Ar collisions

    International Nuclear Information System (INIS)

    Plano, V.L.; Sarkadi, L.; Zavodszky, P.; Berenyi, D.; Palinkas, J.; Gulyas, L.; Takacs, E.; Toth, L.; Tanis, J.A.

    1992-01-01

    Cusp-electron production has been investigated in collisions of 75--300 keV He + with Ar. The relative contributions from electron capture to the continuum (ECC), transfer ionization (TI), and electron loss to the continuum (ELC) to the total cusp electron production were measured. Over the energy range investigated, ECC was found to decrease from about 86% to 80%, TI decreased from about 12% to 1%, and ELC increased from about 2% to 20%. The present results are consistent with earlier work for He + and O q+ projectiles

  6. Effect of Dietary L-ascorbic Acid (L-AA on Production Performance, Egg Quality Traits and Fertility in Japanese Quail ( at Low Ambient Temperature

    Directory of Open Access Journals (Sweden)

    N. Shit

    2012-07-01

    Full Text Available Environmental stress boosts the levels of stress hormones and accelerates energy expenditure which subsequently imbalance the body’s homeostasis. L-ascorbic acid (L-AA has been recognized to mitigate the negative impact of environmental stress on production performances in birds. The present investigation was carried out to elucidate the effect of different dietary levels of L-AA on production performance, egg quality traits and fertility in Japanese quail at low ambient temperature. Sixty matured females (15 wks were equally divided into three groups (20/group based on the different dietary levels of L-AA (0, 250 and 500 ppm and coupled with an equal number of males (1:1 obtained from the same hatch. They were managed in uniform husbandry conditions without restriction of feed and water at 14 h photo-schedule. Except for feed efficiency, body weight change, feed consumption and hen-day egg production were recorded highest in 500 ppm L-AA supplemented groups. Among the all egg quality traits studied, only specific gravity, shell weight and thickness differed significantly (p<0.05 in the present study. Fertility was improved significantly (p<0.01 to a dose dependent manner of L-AA. The findings of the present study concluded that dietary L-AA can be a caring management practice at least in part to alleviate the adverse effect of cold induced stress on production performance in Japanese quail.

  7. Effect of the partial replacement of fish meal and oil by vegetable products on performance and quality traits of juvenile shi drum (Umbrina cirrosa L.

    Directory of Open Access Journals (Sweden)

    Igino Andrighetto

    2010-01-01

    Full Text Available A four-month growth trial was carried out in order to evaluate performance and quality traits of juvenile shi drum fedwith two isonitrogenous and isoenergetic diets having different amounts of vegetable products (Vegetable diet vs. Controldiet. Compared to the Control diet, the Vegetable diet was formulated by increasing the replacement of fish meal (14%with soybean and cereal products, and fish oil (12% with a mixture of vegetable oil. On June, 4 groups of 225 fish (2replicates per dietary treatment were sorted according to live weight and reared in fibreglass tanks over a four- monthlong experimental period. Fish were hand fed to apparent satiety. Offered feed, growth parameters and feed efficiencywere recorded as productive performance. At the end of the trial (October biometric, chemical and reological traits wereexamined to assess fish quality. The dietary treatments showed similar productive performance. The relatively high inclusionof vegetable sources led to a significant modification of body shape, mesenteric fat and viscera weight. Among qualitytraits, Vegetable diet-fed fish demonstrated a significantly lower whole body and fillet crude protein content.Yellowness value of the cooked fillet was significantly lower in the Control diet-fed fish, whereas fillet texture was similar.The results of this research showed that shi drum is a suitable candidate for Mediterranean marine aquaculture andits dietary formulation might include at least the amount of vegetable sources used in this trial.

  8. Effects of discharge cleaning on the production of runaway electrons in TORTUS tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Cross, R C; Liu, J R; Giannone, L. (Sydney Univ. (Australia). School of Physics)

    1983-06-01

    Experimental results are presented on the production of runaway electrons as a function of wall cleanliness in the TORTUS tokamak. When the walls are clean, the production rate decreases as the filling pressure increases. When the walls are contaminated by oxygen, the production rate can increase when the filling pressure is increased, owing to the production of water vapour during tokamak discharges. These results resolve the differences reported in the literature on the production of runaways as a function of filling pressure. It is also observed that the runaway electron instability seen in other devices is suppressed when the walls are discharge-cleaned.

  9. Effects of discharge cleaning on the production of runaway electrons in TORTUS tokamak

    International Nuclear Information System (INIS)

    Cross, R.C.; Liu, J.R.; Giannone, L.

    1983-01-01

    Experimental results are presented on the production of runaway electrons as a function of wall cleanliness in the TORTUS tokamak. When the walls are clean, the production rate decreases as the filling pressure increases. When the walls are contaminated by oxygen, the production rate can increase when the filling pressure is increased, owing to the production of water vapour during tokamak discharges. These results resolve the differences reported in the literature on the production of runaways as a function of filling pressure. It is also observed that the runaway electron instability seen in other devices is suppressed when the walls are discharge-cleaned. (author)

  10. Study of cerenkov radiation. Production of {gamma} rays by electron accelerators; Etude du rayonnement de freinage. Production de rayons {gamma} par des accelerateurs d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This study is a critical comparison of the theories of Bremsstrahlung. Experimental results obtained by the production of {gamma} radiation with electron accelerators are compared to the theoretical results in order to estimate the extent to which the various theories are valid. (author) [French] Cette etude est une synthese des theories du rayonnement de freinage. Des resultats experimentaux, obtenus par la production de rayonnements {gamma} avec des accelerateurs d'electrons, sont compares aux resultats theoriques afin d'evaluer les domaines de validite des diverses theories. (auteur)

  11. Production of electronically excited NO via DEA to NO2

    Science.gov (United States)

    Gope, Krishnendu; Tadsare, Vishvesh; Prabhudesai, Vaibhav S.; Krishnakumar, E.

    2017-12-01

    Dissociative electron attachment (DEA) to NO2 in the 7-11 eV range is studied using velocity slice imaging technique. Two distinct channels are observed in the DEA corresponding to O- + NO(A 2Σ+) and O- + NO(C 2Π and/or D 2Σ+). While NO(A 2Σ+) is found to be formed only in very high vibrational levels, NO(C 2Π and/or D 2Σ+) is found to be formed with vibrational distribution starting from v = 0. From the angular distribution of the O- ions leading to the NO(C 2Π and/or D 2Σ+) channel, we obtain the symmetry of the negative ion resonance to be dominantly B1 with small contribution from B2. Contribution to the Topical Issue: "Low Energy Positron and Electron Interactions", edited by James Sullivan, Ron White, Michael Bromley, Ilya Fabrikant, and David Cassidy.

  12. Production of ion beam by conical pinched electron beam diode

    International Nuclear Information System (INIS)

    Matsukawa, Y.; Nakagawa, Y.

    1982-01-01

    Some properties of the ion beam produced by pinched electron beam diode having conical shape electrodes and organic insulator anode was studied. Ion energy is about 200keV and the peak diode current is about 30 kA. At 11cm from the diode apex, not the geometrical focus point, concentrated ion beam was obtained. Its density is more than 500A/cm 2 . The mean ion current density within the radius of 1.6cm around the axis from conical diode is two or three times that from an usual pinched electron beam diode with flat parallel electrodes of same dimension and impedance under the same conditions. (author)

  13. MESON AND DI-ELECTRON PRODUCTION WITH HADES

    Czech Academy of Sciences Publication Activity Database

    Frohlich, I.; Agakishiev, G.; Agodi, C.; Balanda, A.; Bellia, G.; Belver, D.; Belyaev, A.; Blanco, A.; Böhmer, M.; Boyard, J. L.; Braun-Munzinger, P.; Cabanelas, P.; Castro, E.; Chernenko, S.; Christ, T.; Destefanis, M.; Díaz, J.; Dohrmann, F.; Dybczak, A.; Eberl, T.; Fabbietti, L.; Fateev, O.; Finocchiaro, P.; Fonte, P.; Friese, J.; Galatyuk, T.; Garzón, J.A.; Gernhäuser, R.; Gil, A.; Gilardi, C.; Golubeva, M.; Gonzalez-Diaz, D.; Grosse, E.; Guber, F.; Heilmann, M.; Hennino, T.; Holzmann, R.; Ierusalimov, A.; Iori, I.; Ivashkin, A.; Jurkovic, M.; Kämpfer, B.; Kanaki, K.; Karavicheva, T.; Kirschner, D.; Koenig, I.; Koenig, W.; Kolb, B.W.; Kotte, R.; Kozuch, A.; Krása, Antonín; Křížek, Filip; Krücken, R.; Kuhn, W.; Kugler, Andrej; Kurepin, A.; Lamas-Valverde, J.; Lang, S.; Lange, J.S.; Lapidus, K.; Lopes, L.; Maier, L.; Mangiarotti, A.; Marín, J.; Markert, J.; Metag, V.; Michalska, B.; Michel, J.; Mishra, D.; Moriniére, E.; Mousa, J.; Muntz, C.; Naumann, L.; Novotny, R.; Otwinowski, J.; Pachmayer, Y.C.; Palka, M.; Parpottas, Y.; Pechenov, V.; Pechenova, O.; Cavalcanti, T.P.; Pietraszko, J.; Przygoda, W.; Ramstein, B.; Reshetin, A.; Roy-Stephan, M.; Rustamov, A.; Sadovsky, A.; Sailer, B.; Salabura, P.; Schmah, A.; Simon, R. S.; Sobolev, Yuri, G.; Spataro, S.; Spruck, B.; Strobele, H.; Stroth, J.; Sturm, C.; Sudol, M.; Tarantola, A.; Teilab, K.; Tlustý, Pavel; Traxler, M.; Trebacz, R.; Tsertos, H.; Veretenkin, I.; Wagner, Vladimír; Wen, H.; Wisniowski, M.; Wojcik, T.; Wüstenfeld, J.; Yurevich, S.; Zanevsky, Yu.; Zhou, P.; Zumbruch, P.

    2009-01-01

    Roč. 24, 2-3 (2009), s. 317-326 ISSN 0217-751X. [Conference MESON 2008. Jagiellonian Univ, Cracow, 06.06.2008-10.06.2008] R&D Projects: GA AV ČR IAA100480803; GA MŠk LC07050 Institutional research plan: CEZ:AV0Z10480505 Keywords : Mesons * di-electrons * resonances Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.941, year: 2009

  14. Software product line engineering for consumer electronics : Keeping up with the speed of innovation

    NARCIS (Netherlands)

    Hartmann, Herman

    2015-01-01

    During the last decade consumer electronics products have changed radically. Traditionally these products were used for a few dedicated tasks, and were implemented through hardware. Nowadays, these products are used for a variety of tasks and are largely implemented through software. Furthermore

  15. Multi-Electron Production at High Transverse Momenta in ep Collisions at HERA

    CERN Document Server

    Aktas, A.; Anthonis, T.; Asmone, A.; Babaev, A.; Backovic, S.; Bahr, J.; Baranov, P.; Barrelet, E.; Bartel, W.; Baumgartner, S.; Becker, J.; Beckingham, M.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, C.; Berndt, T.; Bizot, J.C.; Bohme, J.; Boenig, M.O.; Boudry, V.; Bracinik, J.; Braunschweig, W.; Brisson, V.; Broker, H.B.; Brown, D.P.; Bruncko, D.; Busser, F.W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Caron, S.; Cassol-Brunner, F.; Chekelian, V.; Clarke, D.; Collard, C.; Contreras, J.G.; Coppens, Y.R.; Coughlan, J.A.; Cousinou, M.C.; Cox, B.E.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Dau, W.D.; Daum, K.; Delcourt, B.; Delerue, N.; Demirchyan, R.; De Roeck, A.; De Wolf, E.A.; Diaconu, C.; Dingfelder, J.; Dodonov, V.; Dowell, J.D.; Dubak, A.; Duprel, C.; Eckerlin, Guenter; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Ellerbrock, M.; Elsen, E.; Erdmann, M.; Erdmann, W.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Ferencei, J.; Fleischer, M.; Fleischmann, P.; Fleming, Y.H.; Flucke, G.; Flugge, G.; Fomenko, A.; Foresti, I.; Formanek, J.; Franke, G.; Frising, G.; Gabathuler, E.; Gabathuler, K.; Garvey, J.; Gassner, J.; Gayler, Joerg; Gerhards, R.; Gerlich, C.; Ghazaryan, Samvel; Goerlich, L.; Gogitidze, N.; Gorbounov, S.; Grab, C.; Grabski, V.; Grassler, H.; Greenshaw, T.; Gregori, M.; Grindhammer, Guenter; Haidt, D.; Hajduk, L.; Haller, J.; Heinzelmann, G.; Henderson, R.C.W.; Henschel, H.; Henshaw, O.; Heremans, R.; Herrera, G.; Herynek, I.; Hildebrandt, M.; Hiller, K.H.; Hladky, J.; Hoting, P.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Ibbotson, M.; Jacquet, M.; Janauschek, L.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, C.; Johnson, D.P.; Jung, H.; Kant, D.; Kapichine, M.; Karlsson, M.; Katzy, J.; Keil, F.; Keller, N.; Kennedy, J.; Kenyon, I.R.; Kiesling, Christian M.; Klein, M.; Kleinwort, C.; Kluge, T.; Knies, G.; Koblitz, B.; Kolya, S.D.; Korbel, V.; Kostka, P.; Koutouev, R.; Kropivnitskaya, A.; Kroseberg, J.; Kueckens, J.; Kuhr, T.; Landon, M.P.J.; Lange, W.; Lastovicka, T.; Laycock, P.; Lebedev, A.; Leissner, B.; Lemrani, R.; Lendermann, V.; Levonian, S.; List, B.; Lobodzinska, E.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lueders, H.; Luders, S.; Luke, D.; Lytkin, L.; Makankine, A.; Malden, N.; Malinovski, E.; Mangano, S.; Marage, P.; Marks, J.; Marshall, R.; Martyn, H.U.; Martyniak, J.; Maxfield, S.J.; Meer, D.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, J.; Michine, S.; Mikocki, S.; Milstead, D.; Moreau, F.; Morozov, A.; Morris, J.V.; Muller, K.; Murin, P.; Nagovizin, V.; Naroska, B.; Naumann, J.; Naumann, T.; Newman, Paul R.; Niebergall, F.; Niebuhr, C.; Nikitin, D.; Nowak, G.; Nozicka, M.; Olivier, B.; Olsson, J.E.; Ozerov, D.; Pascaud, C.; Patel, G.D.; Peez, M.; Perez, E.; Petrukhin, A.; Pitzl, D.; Poschl, R.; Povh, B.; Raicevic, N.; Rauschenberger, J.; Reimer, P.; Reisert, B.; Risler, C.; Rizvi, E.; Robmann, P.; Roosen, R.; Rostovtsev, A.; Rusakov, S.; Rybicki, K.; Sankey, D.P.C.; Sauvan, E.; Schatzel, S.; Scheins, J.; Schilling, F.P.; Schleper, P.; Schmidt, D.; Schmidt, S.; Schmitt, S.; Schneider, M.; Schoeffel, L.; Schoning, A.; Schroder, V.; Schultz-Coulon, H.C.; Schwanenberger, C.; Sedlak, K.; Sefkow, F.; Sheviakov, I.; Shtarkov, L.N.; Sirois, Y.; Sloan, T.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, Arnd E.; Spitzer, H.; Stamen, R.; Stella, B.; Stiewe, J.; Strauch, I.; Straumann, U.; Thompson, Graham; Thompson, P.D.; Tomasz, F.; Traynor, D.; Truoel, Peter; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Turney, J.E.; Tzamariudaki, E.; Uraev, A.; Urban, Marcel; Usik, A.; Valkar, S.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vargas Trevino, A.; Vassiliev, S.; Vazdik, Y.; Veelken, C.; Vest, A.; Vichnevski, A.; Volchinski, V.; Wacker, K.; Wagner, J.; Waugh, B.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Werner, N.; Wessels, M.; Wessling, B.; Winde, M.; Winter, G.G.; Wissing, C.; Woehrling, E.E.; Wunsch, E.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhokin, A.; Zomer, F.; zur Nedden, M.

    2003-01-01

    Multi-electron production is studied at high electron transverse momentum in positron- and electron-proton collisions using the H1 detector at HERA. The data correspond to an integrated luminosity of 115 pb-1. Di-electron and tri-electron event yields are measured. Cross sections are derived in a restricted phase space region dominated by photon-photon collisions. In general good agreement is found with the Standard Model predictions. However, for electron pair invariant masses above 100 GeV, three di-electron events and three tri-electron events are observed, compared to Standard Model expectations of 0.30 pm 0.04 and 0.23 pm 0.04, respectively.

  16. Interaction Effect Between Herbivory and Plant Fertilization on Extrafloral Nectar Production and on Seed Traits: An Experimental Study With Ricinus communis (Euphorbiaceae).

    Science.gov (United States)

    De Sibio, P R; Rossi, M N

    2016-08-01

    It is known that the release of volatile chemicals by many plants can attract the natural enemies of herbivorous insects. Such indirect interactions are likely when plants produce nectar from their extrafloral nectaries, and particularly when the production of extrafloral nectar (EFN) is induced by herbivory. In the present study, we conducted experiments to test whether foliar herbivory inflicted by Spodoptera frugiperda Smith (Noctuidae) increases nectar production by extrafloral nectaries on one of its host plants, Ricinus communis L. (Euphorbiaceae). Due to the current economic importance of R. communis, we also investigated whether the following seed traits-water content, dry mass, and essential oil production-are negatively affected by herbivory. Finally, we tested whether or not nectar production and seed traits are influenced by plant fertilization (plant quality). We found that nectar production was increased after herbivory, but it was not affected by the type of fertilization. Seed dry mass was higher in plants that were subjected to full fertilization, without herbivory; plants maintained in low fertilization conditions, however, had higher seed mass when subjected to herbivory. The same inverted pattern was observed for oil production. Therefore, our results suggest that EFN production in R. communis may act as an indirect defense strategy against herbivores, and that there is a trade-off between reproduction and plant growth when low-fertilized plants are subjected to herbivory. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. A selective genotyping approach identifies single nucleotide polymorphisms in porcine chromosome 2 genes associated with production and carcass traits in Italian heavy pigs

    Directory of Open Access Journals (Sweden)

    Vincenzo Russo

    2011-04-01

    Full Text Available Several studies have shown that porcine chromosome 2 (SSC2 harbors important quantitative trait loci (QTL for production traits. In particular, an imprinted QTL for muscle mass production is determined by a mutation in the IGF2 gene (intron3-g.3072G>A. We recently identified and analysed single nucleotide polymorphisms (SNPs in genes (cathepsin D, CTSD g.70G>A; cathepsin F, CTSF g.22G>C; lactate dehydrogenase A, LDHA g.46G>T localized on SSC2 (including the IGF2 intron3-g.3072G>A SNP showing association with production traits in Italian Large White pigs and/or localizing them on QTL regions. Here we analysed these markers applying a selective genotyping approach based on estimated breeding values (EBVs. Three groups of Italian Large White pigs each made by animals with the most positive (n. 50 and most negative (n. 50 EBVs for average daily gain (ADG, backfat thickness (BFT or weight of lean cuts (LC and one group of Italian Duroc pigs made by 50 animals with most positive and 50 animals with most negative EBV for visible intermuscular fat (VIF were genotyped. In Italian Large White pigs, allele frequency differences for the IGF2 intron3-g.3072G>A SNP between the two extreme tails for all groups were highly significant (considering all analysed animals: P=9.53E-20 for LC; P=3.16E-15 for BFT; P=4.41E-6 for ADG. Significant allele frequency differences were also observed for the CTSD g.70G>A (P=0.0002 for ADG; P=0.00068 and LDHA g.46G>T (P=2.32E-5 for ADG polymorphisms. These results provide further support on the effects of these polymorphisms or genes whose application on marker assisted selection programs could be envisaged.

  18. [Advertising and promotion of tobacco products and electronic cigarettes].

    Science.gov (United States)

    Canevascini, Michela; Kuendig Hervé; Véron, Claudia; Pasche, Myriam

    2015-06-10

    Switzerland is one of the least restrictive countries in Europe in terms of tobacco advertising. A study conducted between 2013 and 2014 documented the presence of tobacco advertising, promotion and sponsorship in western Switzerland. The first part of this article presents the results of the observations realized in points of sale, in private events sponsored by the tobacco industry and during daily itineraries of young people. The results show that tobacco advertising, promotion and sponsorship are omnipresent and mainly target young people. The second part of the article analyses the presence of electronic cigarette advertising and promotion, observed in points of sale and on online stores.

  19. Sustainable transition of electronic products through waste policy

    DEFF Research Database (Denmark)

    Lauridsen, Erik Hagelskjær; Jørgensen, Ulrik

    2010-01-01

    regimes are described and analyzed together with the underlying regulatory principle of extended producer responsibility, which has guided the design of the directive. Conflicting interpretations of sustainability, in combination with a simplistic understanding and agency introduced from the top-down, has...... eliminated waste minimization as the main outcome of the directive. The concluding discussions raise the issues of the role of sustainable niche initiatives in electronics compared to multi-regime interaction. Guiding visions may need to be supplemented with other alignment devices in order to support co...

  20. Genetic parameters of blood β-hydroxybutyrate predicted from milk infrared spectra and clinical ketosis, and their associations with milk production traits in Norwegian Red cows.

    Science.gov (United States)

    Belay, T K; Svendsen, M; Kowalski, Z M; Ådnøy, T

    2017-08-01

    The aim of this study was to estimate genetic parameters for blood β-hydroxybutyrate (BHB) predicted from milk spectra and for clinical ketosis (KET), and to examine genetic association of blood BHB with KET and milk production traits (milk, fat, protein, and lactose yields, and milk fat, protein, and lactose contents). Data on milk traits, KET, and milk spectra were obtained from the Norwegian Dairy Herd Recording System with legal permission from TINE SA (Ås, Norway), the Norwegian Dairy Association that manages the central database. Data recorded up to 120 d after calving were considered. Blood BHB was predicted from milk spectra using a calibration model developed based on milk spectra and blood BHB measured in Polish dairy cows. The predicted blood BHB was grouped based on days in milk into 4 groups and each group was considered as a trait. The milk components for test-day milk samples were obtained by Fourier transform mid-infrared spectrometer with previously developed calibration equations from Foss (Hillerød, Denmark). Veterinarian-recorded KET data within 15 d before calving to 120 d after calving were used. Data were analyzed using univariate or bivariate linear animal models. Heritability estimates for predicted blood BHB at different stages of lactation were moderate, ranging from 0.250 to 0.365. Heritability estimate for KET from univariate analysis was 0.078, and the corresponding average estimate from bivariate analysis with BHB or milk production traits was 0.002. Genetic correlations between BHB traits were higher for adjacent lactation intervals and decreased as intervals were further apart. Predicted blood BHB at first test day was moderately genetically correlated with KET (0.469) and milk traits (ranged from -0.367 with protein content to 0.277 with milk yield), except for milk fat content from across lactation stages that had near zero genetic correlation with BHB (0.033). These genetic correlations indicate that a lower BHB is genetically

  1. GWA Analysis for Milk Production Traits in Dairy Sheep and Genetic Support for a QTN Influencing Milk Protein Percentage in the LALBA Gene

    DEFF Research Database (Denmark)

    García-Gámez, Elsa; Gutiérrez-Gil, Beatriz; Sahana, Goutam

    2012-01-01

    In this study, we used the Illumina OvineSNP50 BeadChip to conduct a genome-wide association (GWA) analysis for milk production traits in dairy sheep by analyzing a commercial population of Spanish Churra sheep. The studied population consisted of a total of 1,681 Churra ewes belonging to 16 half...... identified was located within the coding gene sequence (LALBA_g.242T.C) and was predicted to cause an amino acid change in the protein (Val27Ala). Different approaches, including GWA analysis, a combined linkage and linkage disequilibrium study and a concordance test with the QTL segregating status...

  2. Accelerated electron beams for production of heat shrinkable polymeric products and PTFE wastes recovery

    Energy Technology Data Exchange (ETDEWEB)

    Marin, Gh; Marcuta, M [SC ICPE Electrostatica SA, Bucharest (Romania); Jipa, S [' Valahia' University, Targoviste (Romania)

    2001-07-01

    Radiation curing, i.e. curing under the action of ionizing radiation (predominantly electron beams) is one of the most important areas of radiation processing. There are many practical applications of electron beam processing. Our research activity was focused on two of them: radiation cross-linking of polymeric materials; recovery of PTFE wastes. For this purpose we have used: an industrial electron accelerator ILU-6 with 2.5 MeV electron energy and 40kW beam power; equipment for the transport of materials under the electron beam; and a technologic line with typical equipment for the expansion process.

  3. Accelerated electron beams for production of heat shrinkable polymeric products and PTFE wastes recovery

    International Nuclear Information System (INIS)

    Marin, Gh.; Marcuta, M.; Jipa, S.

    2001-01-01

    Radiation curing, i.e. curing under the action of ionizing radiation (predominantly electron beams) is one of the most important areas of radiation processing. There are many practical applications of electron beam processing. Our research activity was focused on two of them: radiation cross-linking of polymeric materials; recovery of PTFE wastes. For this purpose we have used: an industrial electron accelerator ILU-6 with 2.5 MeV electron energy and 40kW beam power; equipment for the transport of materials under the electron beam; and a technologic line with typical equipment for the expansion process

  4. Optically pumped electron spin polarized targets for use in the production of polarized ion beams

    International Nuclear Information System (INIS)

    Anderson, L.W.

    1979-01-01

    The production of relatively dense electron spin polarized alkali metal vapor targets by optical pumping with intense cw dye lasers is discussed. The target density and electron spin polarization depend on the dye laser intensity and bandwidth, the magnetic field at the target, and the electron spin depolarization time. For example in a magnetic field of 1.5 x 10 3 G, and using 1 W dye laser with a bandwidth of 10 10 Hz one can construct an electron spin polarized Na vapor target with a target thickness of 1.6 x 10 13 atoms/cm 2 and an average electron spin polarization of about 90% even though the Na atoms are completely depolarized at every wall collision. Possible uses of the electron spin polarized targets for the production of intense beams of polarized H - or 3 He - ions are discussed. (orig.)

  5. Secondary-electron-production cross sections for electron-impact ionization of helium

    International Nuclear Information System (INIS)

    Goruganthu, R.R.; Bonham, R.A.

    1986-01-01

    Measurements of the double-differential cross sections (DDCS) as a function of the ejected energy, angle, and primary energy for electron-impact ionization of helium are reported at incident energies of 200, 500, 1000, and 2000 eV. The ejection angle is varied from 30 0 to 150 0 in steps of 15 0 . The cross sections were obtained by use of a crossed-beam apparatus with an effusive gas source and a pulsed electron beam. Scattered and ejected electrons were energy analyzed by time-of-flight analysis from 2 eV to the primary energy as a function of the ejection angle. The relative measurements were normalized by matching the experimental elastic differential cross sections to absolute measurements at selected angles. Comparisons of the DDCS with available literature values revealed significant differences. At 2000 eV impact energy, first-Born-approximation calculations of the DDCS were found to be in agreement with the present data for ejected energies between 2 and 40 eV. At large angles and lower incident energies the Born calculation results are lower than the present DDCS. The DDCS were fitted with a Legendre-polynomial expansion as a function of ejection angle for fixed ejected and primary energies. The energy distributions of ejected electrons derived from these fits are presented and used to calculate the total ionization cross section

  6. Electron-positron pair production in ultrastrong laser fields

    Directory of Open Access Journals (Sweden)

    Bai Song Xie

    2017-09-01

    Full Text Available Electron–positron pair production due to the decay of vacuum in ultrastrong laser fields is an interesting topic which is revived recently because of the rapid development of current laser technology. The theoretical and numerical research progress of this challenging topic is reviewed. Many new findings are presented by different approaches such as the worldline instantons, the S-matrix theory, the kinetic method by solving the quantum Vlasov equation or/and the real-time Dirac–Heisenberg–Wigner formalism, the computational quantum field theory by solving the Dirac equation and so on. In particular, the effects of electric field polarizations on pair production are unveiled with different patterns of created momentum spectra. The effects of polarizations on the number density of created particles and the nonperturbative signatures of multiphoton process are also presented. The competitive interplay between the multiphoton process and nonperturbation process plays a key role in these new findings. These newly discovered phenomena are valuable to deepen the understanding of pair production in complex fields and even have an implication to the study of strong-field ionization. More recent studies on the pair production in complex fields as well as beyond laser fields are briefly presented in the view point of perspective future.

  7. Wintelism and Production Networks in the Electronics Industry

    NARCIS (Netherlands)

    van de Gevel, A.J.W.

    1997-01-01

    This paper deals with two interrelated elements of globalization: Wintelism and cross national production networks which have been underexposed in discussions about globalization.Wintelism refers to the shift in competition away from final assembly and vertical control of markets by final assemblers

  8. Integrated methodology for production related risk management of vehicle electronics (IMPROVE)

    OpenAIRE

    Geis, Stefan Rafael

    2006-01-01

    This scientific work is designated to provide an innovative and integrated conceptional approach to improve the assembly quality of automotive electronics. This is achieved by the reduction and elimination of production related risks of automotive electronics and the implementation of a sustainable solution process. The focus is the development and implementation of an integrated technical risk management approach for automotive electronics throughout the vehicle life cycle and the vehicle pr...

  9. Cross section formulae on single W and Z boson productions in electron-positron collisions

    International Nuclear Information System (INIS)

    Katuya, Mituaki

    1987-01-01

    The formulae are given for the transverse momentum distributions and total cross sections for the single W boson and Z boson productions in electron-positron collisions by using the equivalent photon approximation. (author)

  10. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, November). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presentation at ICO Fall School 2012, Girona, Spain.

  11. 2006 China Machinery and Electronical Products Trade Fair:Ample Fruits Shown

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ 2006 Malaysia China Machinery and Electronical Products Trade Fair, organized by China Council for the Promotion of International Trade(CCPIT), was held in August in Prince World Trade Center(PWTC), Kuala Lumpur.

  12. Printing versus coating - What will be the future production technology for printed electronics?

    Energy Technology Data Exchange (ETDEWEB)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

    2015-02-17

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  13. Subsystem for control of isotope production with linear electron accelerator

    CERN Document Server

    Karasyov, S P; Uvarov, V L

    2001-01-01

    In this report the high-current LINAC subsystem for diagnostic and monitoring the basic technological parameters of isotope production (energy flux of Bremsstrahlung photons and absorbed doze in the target,target activity, temperature and consumption of water cooling the converter and target) is described.T he parallel printer port (LPT) of the personal computer is proposed to use as an interface with the measurement channels.

  14. Subsystem for control of isotope production with linear electron accelerator

    International Nuclear Information System (INIS)

    Karasyov, S.P.; Pomatsalyuk, R.I.; Uvarov, V.L.

    2001-01-01

    In this report the high-current LINAC subsystem for diagnostic and monitoring the basic technological parameters of isotope production (energy flux of Bremsstrahlung photons and absorbed doze in the target,target activity, temperature and consumption of water cooling the converter and target) is described.T he parallel printer port (LPT) of the personal computer is proposed to use as an interface with the measurement channels

  15. Production of a monoenergetic electron bunch in a self-injected laser-wakefield accelerator

    International Nuclear Information System (INIS)

    Chang, C.-L.; Hsieh, C.-T.; Ho, Y.-C.; Chen, Y.-S.; Lin, J.-Y.; Wang, J.; Chen, S.-Y.

    2007-01-01

    Production of a monoenergetic electron bunch in a self-injected laser-wakefield accelerator is investigated with a tomographic method which resolves the electron injection and acceleration processes. It is found that all the electrons in the monoenergetic electron bunch are injected at the same location in the plasma column and then accelerated with an acceleration gradient exceeding 2 GeV/cm. The injection position shifts with the position of pump-pulse focus, and no significant deceleration is observed for the monoenergetic electron bunch after it reaches the maximum energy. The results are consistent with the model of transverse wave breaking and beam loading for the injection of monoenergetic electrons. The tomographic method adds a crucial dimension to the whole array of existing diagnostics for laser beams, plasma waves, and electron beams. With this method the details of the underlying physical processes in laser-plasma interactions can be resolved and compared directly to particle-in-cell simulations

  16. Electronic Cigarette and Electronic Hookah: A Pilot Study Comparing Two Vaping Products

    Directory of Open Access Journals (Sweden)

    Shanta R. Dube

    2015-01-01

    Full Text Available Since the introduction of e-cigarettes into the U.S. market, the number and variety of vaping products have proliferated. E-hookahs are long, pen-like vaping devices that debuted in U.S. markets in 2014. By applying the Host, Agent, Vector, Environment (HAVE model, the objective of this exploratory study was to assess differences between e-cigarettes and e-hookahs to help inform tobacco regulatory science and practice. In June–August 2014, a total of 54 unique manufactured e-cigarette and e-hookah products were identified at point of sales (POS around three college campuses in Southeast U.S. Documented characteristics included brand name, disposable, rechargeable, nicotine containing, packaging, and flavor type. Descriptive analyses were conducted October to November 2014 to assess frequency and percent of product type across POS and specific characteristics. Among 54 products, 70.4% was e-cigarettes and 29.6% was e-hookahs. Across POS, drug stores and grocery stores carried e-cigarettes exclusively, while gas stations carried the greatest proportion of e-hookahs. Compared to e-hookahs, a greater proportion of e-cigarettes were non-disposable and contained nicotine; a greater proportion of e-hookahs came in fruit and other types of flavors compared to e-cigarettes. The present study suggests that e-cigarettes and e-hookahs differ by specific product characteristics and by places where they are sold. Despite these differences, the products are used for similar purposes warranting careful monitoring of industry manufacturing and marketing, because the safety of both products is still undetermined. Additional research is needed to understand the uptake and continued use of these products.

  17. Electronic Cigarette and Electronic Hookah: A Pilot Study Comparing Two Vaping Products.

    Science.gov (United States)

    Dube, Shanta R; Pathak, Sarita; Nyman, Amy L; Eriksen, Michael P

    Since the introduction of e-cigarettes into the U.S. market, the number and variety of vaping products has proliferated. E-hookahs are long, pen-like vaping devices that debuted in U.S. markets in 2014. By applying the Host, Agent, Vector, Environment (HAVE) Model, the objective of this exploratory study was to assess differences between e-cigarettes and e-hookahs to help inform tobacco regulatory science and practice. In June-August 2014, a total of 54 unique manufactured e-cigarette and e-hookah products were identified at point of sales (POS) around three college campuses in Southeast U.S. Documented characteristics included brand name, disposable, rechargeable, nicotine containing, packaging, and flavor type. Statistical analyses were conducted October to November 2014 to assess frequency and percent of product type across POS and specific characteristics. Among 54 products, 70.4% were e-cigarettes and 29.6% were e-hookahs. Across POS, drug stores and grocery stores carried e-cigarettes exclusively, while gas stations carried the greatest proportion of e-hookahs. Compared to e-hookahs, a greater proportion of e-cigarettes were non-disposable and contained nicotine; a greater proportion of e-hookahs came in fruit and other types of flavors compared to e-cigarettes. The present study suggests that e-cigarettes and e-hookahs differ by specific product characteristics and by places where they are sold. Despite these differences, the products are used for similar purposes warranting careful monitoring of industry manufacturing and marketing, because the safety of both products is still undetermined. Additional research is needed to understand the uptake and continued use of these products.

  18. Computer Tomography from Micro-Electronics to Assembled Products

    Directory of Open Access Journals (Sweden)

    Keith Bryant

    2017-06-01

    Full Text Available Traditional CT in our industry has been limited to Business card sized samples, due to the Cone Beam x-ray systems used by Electronics manufacturing companies. Inclined or Partial CT provides a slightly different solution showing layers or slices in 2D very well, but due to the partial nature of the scans does not produce very accurate 3D reconstructions. This seminar will look at more sophisticated x-ray systems, including dual tube units, which can image at sub-micron level and have the ability to build an accurate and detailed 3D image of a tablet or smart phone without any stitching or joining of images. With high quality reconstruction software, these images can easily be manipulated to allow key features or failure sites to be easily seen. These systems are being used in Failure Analysis but also in NPI and in the design and development process as CAD data can be overlaid and metrology is also possible with some systems.

  19. Secondary-electron-production cross sections for electron-impact ionization of molecular nitrogen

    International Nuclear Information System (INIS)

    Goruganthu, R.R.; Wilson, W.G.; Bonham, R.A.

    1987-01-01

    Measurements of the double-differential cross section (DDCS), as a function of the ejected energy, angle, and primary energy for electron-impact ionization of molecular nitrogen are reported at incident energies of 200, 500, 1000, and 2000 eV. The ejection angle was varied from 30 0 to 150 0 in steps of 15 0 . The cross sections were obtained by use of a crossed-beam apparatus with an effusive gas source and a pulsed electron beam. Scattered and ejected electrons were energy analyzed by time-of-flight analysis from below 2 eV to the primary energy. The relative measurements were placed on an absolute scale by matching the experimental elastic differential cross sections to absolute measurements at each primary energy. Comparisons of the DDCS with previous reported values revealed significant differences. The DDCS were fitted to a Legendre polynomial expansion as a function of the ejection angle. Platzman plot analysis was carried out on the energy distributions determined from the fit coefficients. The total ionization cross sections at these primary energies were deduced from this plot. An autoionization feature at 2.3 eV was observed for the first time in measurements of this nature and has been assigned as due to a Rydberg state converging to the B 2 Σ/sub u/ + ionic state which decays to the X 2 Σ/sub g/ + ground state of N 2 + . An analysis of the autoionization lines observed in the present work in the range 0.4--2.5 eV is also presented

  20. Transport equation theory of electron backscattering and x-ray production

    International Nuclear Information System (INIS)

    Fathers, D.J.; Rez, P.

    1978-02-01

    A transport equation theory of electron backscattering and x ray production is derived and applied to energy dissipation of 30-KeV electrons for copper as a function of depth and to the energy distribution of backscattered electrons for copper, aluminum, and gold. These results are plotted and compared with experiment. Plots for variations of backscattering with atomic number and with angle of incidence, and polar plots of backscattering for 30-keV electrons at normal incidence are also presented. 10 references, seven figures

  1. Electron cyclotron resonance discharge as a source for hydrogen and deuterium ions production

    Energy Technology Data Exchange (ETDEWEB)

    Chacon Velasco, A.J. [Universidad de Pamplona, Pamplona (Colombia); Dougar-Jabon, V.D. [Universidad Industrial de Santander, Bucaramanga (Colombia)

    2004-07-01

    In this report, we describe characteristics of a ring-structure hydrogen plasma heated in electron cyclotron resonance conditions and confined in a mirror magnetic trap and discuss the relative efficiency of secondary electrons and thermo-electrons in negative hydrogen and deuterium ion production. The obtained data and calculations of the balance equations for possible reactions demonstrate that the negative ion production is realized in two stages. First, the hydrogen and deuterium molecules are excited in collisions with the plasma electrons to high-laying Rydberg or vibrational levels in the plasma volume. The second stage leads to the negative ion production through the process of dissociative attachment of low energy electrons. The low energy electrons are originated due to a bombardment of the plasma electrode by ions of one of the driven rings and thermo-emission from heated tungsten filaments. Experiments seem to indicate that the negative ion generation occurs predominantly in the limited volume filled with thermo-electrons. Estimation of the negative ion generation rate shows that the main channel of H{sup -} and D{sup -} ion production involves the process of high Rydberg state excitation. (authors)

  2. Electron cyclotron resonance discharge as a source for hydrogen and deuterium ions production

    International Nuclear Information System (INIS)

    Chacon Velasco, A.J.; Dougar-Jabon, V.D.

    2004-01-01

    In this report, we describe characteristics of a ring-structure hydrogen plasma heated in electron cyclotron resonance conditions and confined in a mirror magnetic trap and discuss the relative efficiency of secondary electrons and thermo-electrons in negative hydrogen and deuterium ion production. The obtained data and calculations of the balance equations for possible reactions demonstrate that the negative ion production is realized in two stages. First, the hydrogen and deuterium molecules are excited in collisions with the plasma electrons to high-laying Rydberg or vibrational levels in the plasma volume. The second stage leads to the negative ion production through the process of dissociative attachment of low energy electrons. The low energy electrons are originated due to a bombardment of the plasma electrode by ions of one of the driven rings and thermo-emission from heated tungsten filaments. Experiments seem to indicate that the negative ion generation occurs predominantly in the limited volume filled with thermo-electrons. Estimation of the negative ion generation rate shows that the main channel of H - and D - ion production involves the process of high Rydberg state excitation. (authors)

  3. Measurements of Pair Production and Electron Capture from the Continuum in Heavy Particle Collisions

    CERN Multimedia

    2002-01-01

    Large transient Coulomb fields, which are generated in collisions of high-Z systems at sufficiently high energies, lead to copious production of electron-positron pairs. It has been suggested that these lepton pairs might mask signals arising from plasma phase interaction. Pair-production cross sections have been calculated by several authors with results which differ significantly from each other. Some of the electrons produced may be captured into bound states of the ion, thereby, reducing its charge state by one unit. This process which has been termed ``Electron Capture from Pair Production``, represents the only electron capture pro which increases with energy, and as such, will dominate all others in the ultrarelativistic energy regime. Ions having undergone this process would be lost from storage-type accelerators. The absolute cross sections for capture have been calculated with results which differ by as much as an order of magnitude. If as large as some of the calculations predict, Relativistic Heav...

  4. Measurements of Pair Production and Electron Capture from the Continuum in Heavy Particle Collisions

    CERN Multimedia

    2002-01-01

    % WA99 \\\\ \\\\ Large transient Coulomb fields, which are generated in collisions of high-Z systems at sufficiently high energies, lead to copious production of electron-positron pairs. It has been suggested that these lepton pairs might mask signals arising from plasma phase interaction. Pair-production cross-sections have been calculated by several authors with results that differ significantly from each other. For very heavy ions and high energies, multiple pairs are expected to be formed even in single peripheral collisions. Perturbative and nonperturbative treatments lead to various predictions for the fractions of multiple pair formation out of the total cross-sections. Some of the electrons produced will be captured into bound states of the ion, thereby, reducing its charge state by one unit. This process which has been termed $^{\\prime\\prime}$Electron Capture from Pair Production$^{\\prime\\prime}$, represents the only electron capture process which increases with energy, and as such, will dominate all oth...

  5. 12 CFR 7.5004 - Sale of excess electronic capacity and by-products.

    Science.gov (United States)

    2010-01-01

    ... bank's needs for banking purposes include: (1) Data processing services; (2) Production and... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Sale of excess electronic capacity and by-products. 7.5004 Section 7.5004 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY...

  6. The commoditization of consumer electronics products and its influence on packaging design

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2008-01-01

    The traditional purpose of packaging for consumer electronics (CE) products was to get them in one piece from the factory to the consumers home. It was purely focused on the physical distribution. In that time, buying a CE product could be considered a major family investment. However, times have

  7. Associations Between Personality Traits and Adherence to Antidepressants Assessed Through Self-Report, Electronic Monitoring, and Pharmacy Dispensing Data : A Pilot Study

    NARCIS (Netherlands)

    Wouters, Hans; Amin, Darya F H; Taxis, Katja; Heerdink, Eibert R; Egberts, Toine; Gardarsdottir, Helga

    2016-01-01

    Treatment with antidepressants is often compromised by substantial nonadherence. To understand nonadherence, specific medication-related behaviors and beliefs have been studied, but less is known about broader and temporally stable personality "traits." Furthermore, adherence has often been assessed

  8. Associations Between Personality Traits and Adherence to Antidepressants Assessed Through Self-Report, Electronic Monitoring, and Pharmacy Dispensing Data : A Pilot Study

    NARCIS (Netherlands)

    Wouters, Hans; Amin, Darya F. H.; Taxis, Katja; Heerdink, Eibert R.; Egberts, Antoine C. G.; Gardarsdottir, Helga

    2016-01-01

    Treatment with antidepressants is often compromised by substantial nonadherence. To understand nonadherence, specific medication-related behaviors and beliefs have been studied, but less is known about broader and temporally stable personality traits. Furthermore, adherence has often been assessed

  9. Atomic spectral-product representations of molecular electronic structure: metric matrices and atomic-product composition of molecular eigenfunctions.

    Science.gov (United States)

    Ben-Nun, M; Mills, J D; Hinde, R J; Winstead, C L; Boatz, J A; Gallup, G A; Langhoff, P W

    2009-07-02

    Recent progress is reported in development of ab initio computational methods for the electronic structures of molecules employing the many-electron eigenstates of constituent atoms in spectral-product forms. The approach provides a universal atomic-product description of the electronic structure of matter as an alternative to more commonly employed valence-bond- or molecular-orbital-based representations. The Hamiltonian matrix in this representation is seen to comprise a sum over atomic energies and a pairwise sum over Coulombic interaction terms that depend only on the separations of the individual atomic pairs. Overall electron antisymmetry can be enforced by unitary transformation when appropriate, rather than as a possibly encumbering or unnecessary global constraint. The matrix representative of the antisymmetrizer in the spectral-product basis, which is equivalent to the metric matrix of the corresponding explicitly antisymmetric basis, provides the required transformation to antisymmetric or linearly independent states after Hamiltonian evaluation. Particular attention is focused in the present report on properties of the metric matrix and on the atomic-product compositions of molecular eigenstates as described in the spectral-product representations. Illustrative calculations are reported for simple but prototypically important diatomic (H(2), CH) and triatomic (H(3), CH(2)) molecules employing algorithms and computer codes devised recently for this purpose. This particular implementation of the approach combines Slater-orbital-based one- and two-electron integral evaluations, valence-bond constructions of standard tableau functions and matrices, and transformations to atomic eigenstate-product representations. The calculated metric matrices and corresponding potential energy surfaces obtained in this way elucidate a number of aspects of the spectral-product development, including the nature of closure in the representation, the general redundancy or

  10. Body weight, egg production, and egg quality traits of gray, brown, and white varieties of Japanese quail (Coturnix coturnix japonica in coastal climatic condition of Odisha

    Directory of Open Access Journals (Sweden)

    Jessy Bagh

    2016-08-01

    Full Text Available Aim: The present study was conducted to evaluate the performance of gray, brown, and white varieties of Japanese quail (Coturnix coturnix japonica with respect to body weight, egg production, and egg quality traits in the coastal climatic condition of Odisha. Materials and Methods: A total of 500-day-old straight run Japanese quail chicks of three varieties, viz., gray, brown, and white were randomly selected and reared in deep litter system at Central Poultry Development Organization, Eastern Region, Bhubaneswar. The weekly body weight of the birds was recorded till their egg production stage (up to 6 weeks of age. The average egg production was recorded every biweekly from 6th to 20th week. Exterior and interior quality of eggs from each variety was determined at 6 weeks of age. Results: The initial average weekly body weight of three varieties did not differ (p>0.05 among the varieties. However, from 1st to 6th week significantly higher body weight was observed in gray than white and brown. Brown varieties had reached 50% egg production 1 week earlier than gray and white. Brown had higher peak hen day (HD production or henhoused egg production followed by white and gray. External quality such as: Egg weight, egg length, egg width, volume, shape index, shell weight, shell thickness depicted no significant difference among the varieties except circumference length and circumference width, which were significantly higher (p≤0.05 in gray varieties than brown varieties. Internal egg characteristics such as: Albumen length, albumen width, albumen height, albumen index, yolk length, yolk width, yolk height, yolk index, albumen weight, yolk weight, Haugh unit revealed no significance difference among the varieties. Conclusion: It may be summarized from the findings that gray excelled in body weight followed by white and brown. Egg production potential in terms of hen house egg production or HD egg production was higher for brown followed by white

  11. Systems Biology for Smart Crops and Agricultural Innovation: Filling the Gaps between Genotype and Phenotype for Complex Traits Linked with Robust Agricultural Productivity and Sustainability

    Science.gov (United States)

    Pathak, Rajesh Kumar; Gupta, Sanjay Mohan; Gaur, Vikram Singh; Pandey, Dinesh

    2015-01-01

    Abstract In recent years, rapid developments in several omics platforms and next generation sequencing technology have generated a huge amount of biological data about plants. Systems biology aims to develop and use well-organized and efficient algorithms, data structure, visualization, and communication tools for the integration of these biological data with the goal of computational modeling and simulation. It studies crop plant systems by systematically perturbing them, checking the gene, protein, and informational pathway responses; integrating these data; and finally, formulating mathematical models that describe the structure of system and its response to individual perturbations. Consequently, systems biology approaches, such as integrative and predictive ones, hold immense potential in understanding of molecular mechanism of agriculturally important complex traits linked to agricultural productivity. This has led to identification of some key genes and proteins involved in networks of pathways involved in input use efficiency, biotic and abiotic stress resistance, photosynthesis efficiency, root, stem and leaf architecture, and nutrient mobilization. The developments in the above fields have made it possible to design smart crops with superior agronomic traits through genetic manipulation of key candidate genes. PMID:26484978

  12. Production of an electron-positron plasma in a pulsar magnetosphere

    International Nuclear Information System (INIS)

    Gurevich, A.V.; Istomin, Y.N.

    1985-01-01

    A study is made of the production of electron-positron plasma in the vacuum state (''breakdown'' of the vacuum) in the presence of an inhomogeneous electric field and a strong curvilinear magnetic field. Such conditions are encountered in the magnetosphere of a rotating neutron star. A general system of kinetic equations is derived for the electrons, positrons, and γ photons in the curvilinear magnetic field with allowance for the production of electron-positron pairs and the emission of curvature and synchrotron photons. The conditions of occurrence of ''breakdown'' are determined, and the threshold value of the jump in the value of the electric field at the surface of the star is found. The process of multiplication of particles in the magnetosphere is investigated, and the distribution functions of the electrons, positrons, and photons are found. The extinction limit of pulsars is determined. It is shown that the theory is in agreement with observational data

  13. Selectron and sneutrino production in electron-proton and electron-positron collisions

    International Nuclear Information System (INIS)

    Salati, P.; Wallet, J.C.

    1983-01-01

    We present a complete calculation of the total cross sections for selectron and sneutrino production in the following processes: e - + p -> se - + gaugino 0 + X, e - + p -> sv + gaugino 0 + X. We find, if the mass of the gaugino is less than 30 GeV, a detectable number of these 'super-particles' will be produced at HERA. In particular, from O(0.5) (msub(selectron)=60 GeV) to O(20) (msub(selectron)=20 GeV) selectrons and photinos will be produced per day. We also give estimates of the total cross section for the processes: e - + e + -> se - + gaugino 0 + e + , e - + e + -> sv + gaugino 0 + e + . It appears that one of the predictions of Fayet's model about the mass of the selectron (msub(selectron) < O(40) GeV), will be testable at LEP. (orig.)

  14. Pair production with electron capture in peripheral collisions of relativistic heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Bertulani, C.A.C.A. E-mail: bertu@if.ufrj.br; Dolci, D.D. E-mail: dolci@if.ufrj.br

    2001-02-26

    The production of electron-positron pairs with the capture of the electron in an atomic orbital is investigated for the conditions of the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). Dirac wave functions for the leptons are used, taking corrections to orders of Z{alpha} into account. The dependence on the transverse momentum transfer is studied and the accuracy of the equivalent photon approximation is discussed as a function of the nuclear charge.

  15. Defect production and annihilation in metals through electronic excitation by energetic heavy ion bombardment

    Energy Technology Data Exchange (ETDEWEB)

    Iwase, Akihiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Defect production, radiation annealing and defect recovery are studied in Ni and Cu irradiated with low-energy ({approx}1-MeV) and high-energy ({approx}100-MeV) ions. Irradiation of Ni with {approx}100-MeV ions causes an anomalous reduction, or even a complete disappearance of the stage-I recovery. This result shows that the energy transferred from excited electrons to lattice atoms through the electron-lattice interaction contributes to the annihilation of the stage-I interstitials. This effect is also observed in Ni as a large radiation annealing during 100-MeV heavy ion irradiation. On the other hand, in Cu thin foils, we find the defect production process strongly associated with electron excitation, where the defect production cross section is nearly proportional to S{sub e}{sup 2}. (author)

  16. Excited-atom production by electron and ion bombardment of alkali halides

    International Nuclear Information System (INIS)

    Walkup, R.E.; Avouris, P.; Ghosh, A.P.

    1987-01-01

    We present experimental results on the production of excited atoms by electron and ion bombardment of alkali halides. For the case of electron bombardment, Doppler shift measurements show that the electronically excited atoms have a thermal velocity distribution in equilibrium with the surface temperature. Measurements of the absolute yield of excited atoms, the distribution of population among the excited states, and the systematic dependence on incident electron current and sample temperature support a model in which the excited atoms are produced by gas-phase collisions between desorbed ground-state atoms and secondary electrons. In contrast, for the case of ion bombardment, the excited atoms are directly sputtered from the surface, with velocity distributions characteristic of a collision cascade, and with typical energies of --10 eV

  17. Electron reconstruction and calibration with single Z and W production in CMS at the LHC

    CERN Document Server

    Rovelli, Chiara

    2006-01-01

    The CMS experiment at the LHC is building an electromagnetic calorimeter with high performance. Preserving high reconstruction efficiency and best four momentum measurements for electrons is a necessity for optimal discovery prospects in the ZZ(*) and WW(*) Higgs boson decay channels. This is challenging in view of the material budget in front of ECAL and of the presence of a strong magnetic field. A new reconstruction strategy for electrons in CMS is described. The usage of electrons from single Z and W production for the ECAL calibration strategy is also discussed.

  18. Effect of Different Slaughter Weights on Slaughter and Carcass Traits of Male Karayaka Lambs Reared under Intensive Production System

    Directory of Open Access Journals (Sweden)

    Yüksel Aksoy

    2015-03-01

    Full Text Available The present study was conducted to investigate the carcass traits of Karayaka lambs slaughtered at different slaughter weights (SWs and to find out optimum SWs. Male Karayaka lambs with 20 kg live weight (n=30 constituted the animal material of the study. Lambs were randomly divided into five SW groups; 30 (GI; n=6, 35 (GII; n=6, 40 (GIII; n=6; 45 (GIV; n=6 and 50 (GV; n=6 kg. Lamb fattening feed (concentrate feed, ad libitum and forage (lentil straw, 100g/lamb/day were used as the feed material. Lambs were sent to slaughter at target SWs. Following the slaughter, non-carcass components, tailless hot and cold carcass weights were taken. Carcasses were separated into six sections as leg, foreleg, back, loin, neck and others. Physical dissection was performed to investigate carcass composition. Only the differences in carcass dressing and skin percentages of slaughter groups were not found to be significant. Increasing carcass fat percentages and decreasing carcass lean and bone percentages were observed with increasing SWs. Considering the consumer preferences, current findings revealed that Karayaka lambs should be sent to slaughter at weights between 30-35 kg. However, considering the red meat deficit of the country, current market conditions and producer preferences, the optimum SW for Karayaka lambs were recommended to be between 40-45 kg.

  19. Effects of different types of dark brooders on injurious pecking damage and production-related traits at rear and lay in layers

    DEFF Research Database (Denmark)

    Riber, A B; Guzman, D A

    2017-01-01

    was to investigate effects of rearing layer chicks with different management strategies and size allowances of dark brooders on IP and production-related traits during rear and lay. Groups of 100 to 103 Isa Warren chicks were reared either with one of 4 brooder types (n = 4 per treatment) or with whole-house heating...... daily from wk 16 until 27 wk of age. Minor differences between brooder treatments were found but with no clear trend pointing to a specific brooder treatment being superior. In contrast, major differences in IP damage were found between birds reared with or without brooders. Brooder birds had a better...... plumage condition throughout the experiment (P body weight on d 7 (P = 0.48). Brooder...

  20. Genetic variability and population structure in loci related to milk production traits in native Argentine Creole and commercial Argentine Holstein cattle

    Directory of Open Access Journals (Sweden)

    Golijow C.D.

    1999-01-01

    Full Text Available Many cattle breeds have been subjected to high selection pressure for production traits. Consequently, population genetic structure and allelic distribution could differ in breeds under high selection pressure compared to unselected breeds. Analysis of k-casein, aS1-casein and prolactin gene frequencies was made for Argentine Creole (AC and Argentine Holstein (AH cattle herds. The calculated FST values measured the degree of genetic differentiation of subpopulations, depending on the variances of gene frequencies.The AC breed had considerably more variation among herds at the aS1-casein and k-casein loci. Conservation strategies should consider the entire AC population in order to maintain the genetic variability found in this native breed.

  1. Product Innovation in High-tech SMEs: A Case Study of Weili Electronics Co.,Ltd

    Institute of Scientific and Technical Information of China (English)

    HE Zheng; LI Shi-ming

    2006-01-01

    Product innovation is an important strategy for high-tech firms, especially for small and medium enterprises. This paper proposes that the technological strategies for SMEs are dynamic and during different phase, there is different innovation strategy which leads to various market performances. In particular, through the case study of Weili Electronics Co., Ltd, we find that organizational learning abilities play a fundamental role in strategic decision. In addition, the frameworks for the determinants of technological strategies in three stages are established to illustrate the evolutionary processes of product innovation in Weili Electronics Co., Ltd.

  2. Comparison of parasitological and productive traits of Criollo lambs native to the central Mexican Plateau and Suffolk lambs experimentally infected with Haemonchus contortus.

    Science.gov (United States)

    Alba-Hurtado, F; Romero-Escobedo, E; Muñoz-Guzmán, M A; Torres-Hernández, G; Becerril-Pérez, C M

    2010-09-20

    The study compares the parasitological and productive traits of Criollo lambs native to the central Mexican Plateau (CNCMP) and Suffolk (SU) lambs experimentally infected with Haemonchus contortus. CNCMP lambs (n=20) and SU lambs (n=15) were infected with L3 of H. contortus while five lambs of each genotype were kept as controls. Fecal egg count (FEC), packed cell volume (PCV), blood eosinophil number (BEN), ocular mucous membrane color (as measured by the FAMACHA index), changes in body condition score (BCS) and cumulative live weight gain (CLWG) were measured weekly during a 20-week period. On week 20, all animals were euthanized and the number of adult worms (AW) in the abomasum was counted. Infected SU lambs had higher (p<0.05) FEC and AW mean values compared to CNCMP lambs, which had a higher mean BEN count (p<0.05). Infected lambs had lower PCV values than controls, regardless of genotype, and had a negative correlation (r=-0.84, p<0.05) with the FAMACHA index. BCS tended to decline for infected SU lambs and increased slightly for infected CNCMP lambs. CLWG differed in all groups (p<0.05); infected SU lambs gained 12.1+/-1.9kg, infected CNCMP lambs gained 18.8+/-0.7kg, control SU lambs gained 34.6+/-1.6kg, and control CNCMP lambs gained 26.9+/-0.8kg. In conclusion, CNCMP lambs had a smaller worm burden, a better ability to maintain their productive traits, and were less affected by infection with Haemonchus contortus.

  3. Ability of dairy cows to be inseminated according to breed and genetic merit for production traits under contrasting pasture-based feeding systems.

    Science.gov (United States)

    Bedere, N; Disenhaus, C; Ducrocq, V; Leurent-Colette, S; Delaby, L

    2017-05-01

    Strong genetic selection on production traits is considered to be responsible for the declined ability of dairy cows to ensure reproduction. The present study aimed to quantify the effect of genetic characteristics (breeds and genetic merit for production traits) and feeding systems (FS) on the ability of dairy cows to be inseminated. An experiment was conducted during 9 years on Normande and Holstein cows assigned to contrasted pasture-based FS. Diets were based on maize silage in winter and grazing plus concentrate in spring in the High FS; and on grass silage in winter and grazing with no concentrate during spring in the low FS. Within breed, cows were classified into two genetic groups with similar estimated breeding values (EBV) for milk solids: cows with high EBV for milk yield were included in a Milk-Group and those with high EBV for fat and protein contents were included in a Content-Group. Holstein produced more milk throughout lactation than Normande cows (+2294 kg in the High FS and +1280 kg in the Low FS, PGenetic group neither affected ovulation detection rate nor DAI1. Within breed and FS, cows with high genetic merit for milk yield had later CLA and DAI1. Cows in the High FS produced more milk and lost less condition to nadir than cows in the Low FS. FS did not affect dairy cows' ability to be inseminated. However, cows with higher milk protein content, and presumably better energy balance, had earlier CLA (P<0.01) and DAI1 (P<0.10). In addition, higher milk yield was associated with poorer ovulation detection rate and oestrus intensity (P<0.05). The study showed that at similar EBV level for milk solids, selection for increased milk fat and protein content resulted in improved cyclicity and similar oestrous expression and submission rates compared with selection for increased milk yield.

  4. Electron-positron pair production in a hot accretion plasma around a massive black hole

    International Nuclear Information System (INIS)

    Takahara, Fumio; Kusunose, Masaaki.

    1985-01-01

    We investigate the electron-positron pair production in a hot accretion plasma around a supermassive black hole in connection with active galactic nuclei. Assuming that an optically thin two-temperature plasma is produced in the vicinity of the central black hole, we examine the condition for the significant pair production by comparing relevant time scales. Since the pair production is dominated by collisions between hard photons, the conditions for significant pair production depend on the production rate of hard photons. We examine the case where the unsaturated Comptonization of soft photons produces hard photons as well as that of bremsstrahlung. We show that significant pair production occurs for a moderately high accretion rate with relatively slow accretion flow as compared to the free fall velocity in both cases. Possible consequences of pair production are briefly discussed. (author)

  5. Two tools for environmentally conscious designers and product developers of electrical & electronic equipment (EEE)

    DEFF Research Database (Denmark)

    Poll, Christian; Hauschild, Michael Zwicky; Olsen, Stig Irving

    2002-01-01

    The paper presents the two tools 1)"Product families - short cuts to environmental knowledge" and 2)"Eco-conscious design of electrical & electronic equipment (EEE)". Tool 1) comes in form of a handbook. The purpose of this handbook is to ease the work with developing more environmentally sound...... products, thus giving guidelines for development of new products without the companies themselves having to perform an LCA. The handbook describes 5 productfamilies: mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting, ventilation. Tool 2) comes in form of a software tool...... with built in training, guidance, references, calculator and database. The tool provides the basic understanding of how EEE-products in general interact with the environment. The tool gives an overview of the tasks and responsibilities involved in Eco-Desing, and examples of how to choose and quantify...

  6. Application of electron-chemical curing in the production of thin composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Kopetchenov, V.; Shik, V.; Konev, V.; Kurapov, A.; Misin, I.; Gavrilov, V.; Malik, V. (Polyrad Research and Production Co., Moscow (Russian Federation))

    Thousands of tons of various thin composite materials in rolls for electrotechnical and domestic application including a whole range of electrical insulating materials, such as varnished and polymer fabrics, glass-micatapes, prepregs, thin laminated plastics and clad laminates, materials for decorative and domestic purposes - pressure sensitive adhesive tape and laminates, covering and finishing compositions based on fabrics, films and papers are produced. An important advantage of the electron-chemical processing in the production of composite materials is an essential energy saving (reduction of energy consumption 3-5 times). Absence of the organic diluents in binders decreases fire and explosion hazards of the production and sufficiently decreases danger for the environment of the technology used. Research and Production Company ''Polyrad'' is engaged in the development of technologies and equipment for the production of thin composite materials by the Electron-Chemical Method. (author).

  7. Application of electron-chemical curing in the production of thin composite materials

    International Nuclear Information System (INIS)

    Kopetchenov, V.; Shik, V.; Konev, V.; Kurapov, A.; Misin, I.; Gavrilov, V.; Malik, V.

    1993-01-01

    Thousands of tons of various thin composite materials in rolls for electrotechnical and domestic application including a whole range of electrical insulating materials, such as varnished and polymer fabrics, glass-micatapes, prepregs, thin laminated plastics and clad laminates, materials for decorative and domestic purposes - pressure sensitive adhesive tape and laminates, covering and finishing compositions based on fabrics, films and papers are produced. An important advantage of the electron-chemical processing in the production of composite materials is an essential energy saving (reduction of energy consumption 3-5 times). Absence of the organic diluents in binders decreases fire and explosion hazards of the production and sufficiently decreases danger for the environment of the technology used. Research and Production Company ''Polyrad'' is engaged in the development of technologies and equipment for the production of thin composite materials by the Electron-Chemical Method. (author)

  8. Thermal Management of Software Changes in Product Lifecycle of Consumer Electronics

    OpenAIRE

    Muraoka , Yoshio; Seki , Kenichi; Nishimura , Hidekazu

    2014-01-01

    Part 6: Industry and Consumer Products; International audience; Because the power consumption of consumer electronic products varies according to processor execution, which depends on software, thermal risk may be increased by software changes, including software updates or the installation of new applications, even after hardware development has been completed. In this paper, we first introduce a typical system-level thermal simulation model, coupling the activities within modules related to...

  9. Guide for preparing annual reports on radiation-safety testing of electronic products (general)

    International Nuclear Information System (INIS)

    1987-10-01

    For manufacturers of electronic products other than those for which a specific guide has been issued, the guide replaces the Guide for the Filing of Annual Reports (21 CFR Subchapter J, Section 1002.11), HHS Publication FDA 82-8127. The electronic product (general) annual reporting guide is applicable to the following products: products intended to produce x radiation (accelerators, analytical devices, therapy x-ray machines); microwave diathermy machines; cold-cathode discharge tubes; and vacuum switches and tubes operating at or above 15,000 volts. To carry out its responsibilities under Public Law 90-602, the Food and Drug Administration's Center for Devices and Radiological Health (CDRH) has issued a series of regulations contained in Title 21 of the Code of Federal Regulations (CFR). Part 1002 of 21 CFR deals with records and reports. Section 1002.61 categorizes electronic products into Groups A through C. Section 1002.30 requires manufacturers of products in Groups B and C to establish and maintain certain records, while Section 1002.11 requires such manufacturers to submit an Annual Report summarizing the contents of the required records. Section 1002.7 requires that reports conform to reporting guides issued by CDRH unless an acceptable justification for an alternate format is provided

  10. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, July). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presented at the meeting of EARLI SIG Writing, Porto, Portugal.

  11. Coupled channel calculations for electron-positron pair production in collisions of heavy ions

    CERN Document Server

    Gail, M; Scheid, W

    2003-01-01

    Coupled channel calculations are performed for electron-positron pair production in relativistic collisions of heavy ions. For this purpose the wavefunction is expanded into different types of basis sets consisting of atomic wavefunctions centred around the projectile ion only and around both of the colliding nuclei. The results are compared with experimental data from Belkacem et al (1997 Phys. Rev. A 56 2807).

  12. 78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

    Science.gov (United States)

    2013-03-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1005 [Docket No. FDA-2007-N-0091; (formerly 2007N-0104)] Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address AGENCY: Food and Drug...

  13. Relativistic total and differential cross section proton--proton electron--positron pair production calculation

    International Nuclear Information System (INIS)

    Rubinstein, J.E.

    1976-01-01

    Circle Feynman diagrams for a specific permutation of variables along with their corresponding algebraic expressions are presented to evaluate [H] 2 for proton-proton electron-positron pair production. A Monte Carlo integration technique is introduced and is used to set up the multiple integral expression for the total pair production cross section. The technique is first applied to the Compton scattering problem and then to an arbitrary multiple integral. The relativistic total cross section for proton-proton electron-positron pair production was calculated for eight different values of incident proton energy. A variety of differential cross sections were calculated for the above energies. Angular differential cross section distributions are presented for the electron, positron, and proton. Invariant mass differential cross section distributions are done both with and without the presence of [H] 2 . Both WGHT and log 10 (TOTAL) distributions were also obtained. The general behavioral trends of the total and differential cross sections for proton-proton electron-positron pair production are presented. The range of validity for this calculation is from 0 to about 200 MeV

  14. Sustainable packaging design for consumer electronics products : Balancing marketing, logistics and environmental requirements

    NARCIS (Netherlands)

    Wever, R.; Boks, C.B.; Pratama, I.; Stevels, A.L.N.

    2007-01-01

    Packaging design for consumer electronic products is a challenge because contradictory demands from a distribution perspective and a marketing perspective have to be balanced. With several company departments involved and powerful external stakeholders this is a complicated matter. As the level of

  15. Electronic outlining as a writing strategy: Effects on students' writing products, mental effort and writing process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2018-01-01

    This study addresses to what extent and how electronic outlining enhances students' writing performance. To this end, the focus of this study is not only on students' final writing products but also on the organisation of the writing process (i.e., planning, translating, and reviewing) and perceived

  16. Potential to Improve the Competitiveness of China's Electronic and Mechanical Products Exports

    Institute of Scientific and Technical Information of China (English)

    Wei Hao; Wang Xi; Wang Luxi

    2010-01-01

    @@ Since launching the reform and opening policy,and particularly since the mid-1990s with accelerating industrialization processes and further policy changes,the electronics and mechanical industry in China has made huge strides in production and foreign trade value,now accounting for approximately half of total exports from China and becoming a pillar industry of China's foreign trade.

  17. Measures for Administration of the Import of Mechanical and Electronic Products

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The Measures for the Administration of the Import of Mechanical and Electronic Products co-formulated by the Ministry of Commerce,the General Administration of Customs and the General Administration of Quality Supervision,Inspection and Quarantine,was hereby promul-gated,which entered into force as of May 1,2008.

  18. Inclusive production of electrons and muons in multihadronic events at PETRA

    International Nuclear Information System (INIS)

    D'Agostini, G.; Apel, W.D.; Engler, J.; Fluegge, G.; Fries, D.C.; Fues, W.; Gamerdinger, K.; Hopp, G.; Kuester, H.; Mueller, H.; Randoll, H.; Schmidt, G.; Schneider, H.; De Boer, W.; Buschhorn, G.; Grindhammer, G.; Grosse-Wiesmann, P.; Gunderson, B.; Kiesling, C.; Kotthaus, R.; Kruse, U.; Lierl, H.; Lueers, D.; Oberlack, H.; Schacht, P.; Colas, P.; Cordier, A.; Davier, M.; Fournier, D.; Grivaz, J.F.; Haissinski, J.; Journe, V.; Laplanche, F.; Mallik, U.; Veillet, J.J.; Behrend, H.J.; Fenner, H.; Schachter, M.J.; Schroeder, V.; Sindt, H.

    1983-05-01

    The production of prompt leptons at PETRA has been measured for c.m. energies of 14, 22 and 34 GeV. The rate of prompt electrons and muons is presented, including a determination of the semileptonic branching ratio of the c and b quarks. Systematic effects due to changes in fragmentation and other model parameters have been studied. (orig./HSI)

  19. Balancing Environmental Performance with Sales Functionalities in Packaging for Consumer Electronic Products

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2006-01-01

    Two major changes are currently taking place in the world of Consumer Electronics. They are, first, the relocation of production to low-wage countries, in particularly China. This results in longer distribution distances, which lead to a higher relative importance of this phase in the entire life

  20. 78 FR 34393 - Electronic Submission of Tobacco Product Applications and Other Information; Public Workshop...

    Science.gov (United States)

    2013-06-07

    .... Contact Person: Karen M. Templeton-Somers, Office of Science, Center for Tobacco Products, Food and Drug... stakeholders and interested parties, including, but not limited to, large and small pharmaceutical..., large and small pharmaceutical manufacturers with experience in electronic submissions; vendors of...

  1. 77 FR 20416 - Used Electronic Products: An Examination of U.S. Exports; Proposed Information Collection...

    Science.gov (United States)

    2012-04-04

    ...: Direct all written comments to Laura Bloodgood, Project Leader, U.S. International Trade Commission, 500... leader Laura Bloodgood ( [email protected] or 202-708-4726) or deputy project leader Andrea Boron..., volume, and value of, and foreign markets of significance for, exports of used electronic products from...

  2. Optimal Consumer Electronics Product Take-Back Time with Consideration of Consumer Value

    Directory of Open Access Journals (Sweden)

    Yi-Tse Fang

    2017-03-01

    Full Text Available Rapid economic growth in recent years has transformed our lifestyle to massively produce, consume, and dispose of products, especially for consumer electronics. This change has put great threat to our environment and caused natural resource depletion. Moreover, short product life cycles and quick replacements of consumer electronics create enormous electronic wastes (e-wastes. Without proper waste management, immense environmental damage is expected. In this empirical study, we notice that lots of valuable materials that can still be recycled from these used consumer electronics are left unused at home instead of being recycled at the appropriate time, which causes a low collection rate and a decrease in residual value for the used products. Therefore, it is important for the government and the recyclers to handle them efficiently by increasing the used product take-back rate. Our study develops an assessment model for customer value based on the idea of value engineering and the perspective of product life cycle. We also explore the relationship between product value and the total cost of ownership with an evaluation of their time variation, considering different usage modes for various consumer groups and different recycling award schemes (fixed and variable recycling awards. Proper take-back management is likely to create a win-win situation both for consumers and environmental protection. This study regards the notebook computer as an example to determine the optimal time for recycling laptops based on usage patterns and provides consumers a reference for when to replace their used product. The results from our modeling firstly clearly indicate that consumers with higher frequency of usage have shorter take back times and higher maximum consumer value. Secondly, a variable recycling award scheme with higher maximum consumer value is more practical than a fixed recycling award scheme.

  3. Effect of light-emitting diode vs. fluorescent lighting on laying hens in aviary hen houses: Part 1 - Operational characteristics of lights and production traits of hens.

    Science.gov (United States)

    Long, H; Zhao, Y; Wang, T; Ning, Z; Xin, H

    2016-01-01

    Light-emitting diode (LED) lights are becoming more affordable for agricultural applications. Despite many lab-scale studies concerning impact of LED on poultry, little research has been documented under field production conditions, especially for laying hens. This 15-month field study was carried out to evaluate the effects of LED vs. fluorescent (FL) lights on laying hens (Dekalb white breed) using 4 (2 pairs) aviary hen houses each at a nominal capacity of 50,000 hens. The evaluation was done regarding operational characteristics of the lights and hen production traits. The results show that spatial distribution of the LED light was less uniform than that of the FL light. Light intensity of the LED light decreased by 27% after 3,360 h use but remained quite steady from 3,360 to 5,760 h use. Eleven out of 762 (1.44%) LED lamps (new at onset of the study) in the 2 houses failed during the 15-month experiment period. The neck area of the LED lamp was hottest, presumably the primary reason for the lamp failure as cracks were noticed in the neck region of all failed LED lamps. No differences were observed in egg weight, hen-day egg production, feed use, and mortality rate between LED and FL regimens. However, hens under the FL had higher eggs per hen housed and better feed conversion than those under the LED during 20 to 70 wk production (P Hens under the LED tended to have less feather uniformity and insulation than those under the FL (P hens under the LED showed a larger median avoidance distance than those under the FL at 36 wk age (P hens under the LED were more alert; but no difference at 60 wk age. More comparative research to quantify behavioral and production responses of different breeds of hens to LED vs. FL lighting seems warranted. © 2015 Poultry Science Association Inc.

  4. The effect of flavin electron shuttles in microbial fuel cells current production

    Energy Technology Data Exchange (ETDEWEB)

    Velasquez-Orta, Sharon B. [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Civil Engineering and Geosciences; Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Chemical Engineering and Advanced Materials; Head, Ian M.; Curtis, Thomas P. [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Civil Engineering and Geosciences; Scott, Keith [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Chemical Engineering and Advanced Materials; Lloyd, Jonathan R.; Canstein, Harald von [Manchester Univ. (United Kingdom). School of Earth, Atmospheric and Environmental Sciences

    2010-02-15

    The effect of electron shuttles on electron transfer to microbial fuel cell (MFC) anodes was studied in systems where direct contact with the anode was precluded. MFCs were inoculated with Shewanella cells, and flavins used as the electron shuttling compound. In MFCs with no added electron shuttles, flavin concentrations monitored in the MFCs' bulk liquid increased continuously with FMN as the predominant flavin. The maximum concentrations were 0.6 {mu}M for flavin mononucleotide and 0.2 {mu}M for riboflavin. In MFCs with added flavins, micro-molar concentrations were shown to increase current and power output. The peak current was at least four times higher in MFCs with high concentrations of flavins (4.5-5.5 {mu}M) than in MFCs with low concentrations (0.2-0.6 {mu}M). Although high power outputs (around 150 mW/m{sup 2}) were achieved in MFCs with high concentrations of flavins, a Clostridium-like bacterium along with other reactor limitations affected overall coulombic efficiencies (CE) obtained, achieving a maximum CE of 13%. Electron shuttle compounds (flavins) permitted bacteria to utilise a remote electron acceptor (anode) that was not accessible to the cells allowing current production until the electron donor (lactate) was consumed. (orig.)

  5. A Theory of Productive Activity: The Relationships among Self-Concept, Gender, Sex Role Stereotypes, and Work-Emergent Traits.

    Science.gov (United States)

    Yount, Kristen R.

    1986-01-01

    Presents a theoretical framework that focuses on the division of labor by gender to account for both sex role stereotypes and the correspondence between these stereotypes and self-concepts of women and men. According to this framework, self-images of adults are largely constituted by attributes generated by their productive activity. (Author/ABB)

  6. The influence of product preparation, familiarity and individual traits on the consumer acceptance of insects as food

    NARCIS (Netherlands)

    Tan Hui Shan, Grace; Berg, van den Eva; Stieger, Markus

    2016-01-01

    Insects are highly valued as food in many cultures but have only recently gained interest in the West as a sustainable alternative to reduce the environmental impact of meat production. Despite the growing consumer interest in insect consumption, there is still a great disparity between curious

  7. A spherical electron cloud hopping model for studying product branching ratios of dissociative recombination.

    Science.gov (United States)

    Yu, Hua-Gen

    2008-05-21

    A spherical electron cloud hopping (SECH) model is proposed to study the product branching ratios of dissociative recombination (DR) of polyatomic systems. In this model, the fast electron-captured process is treated as an instantaneous hopping of a cloud of uniform spherical fractional point charges onto a target M+q ion (or molecule). The sum of point charges (-1) simulates the incident electron. The sphere radius is determined by a critical distance (Rc eM) between the incoming electron (e-) and the target, at which the potential energy of the e(-)-M+q system is equal to that of the electron-captured molecule M+q(-1) in a symmetry-allowed electronic state with the same structure as M(+q). During the hopping procedure, the excess energies of electron association reaction are dispersed in the kinetic energies of M+q(-1) atoms to conserve total energy. The kinetic energies are adjusted by linearly adding atomic momenta in the direction of driving forces induced by the scattering electron. The nuclear dynamics of the resultant M+q(-1) molecule are studied by using a direct ab initio dynamics method on the adiabatic potential energy surface of M+q(-1), or together with extra adiabatic surface(s) of M+q(-1). For the latter case, the "fewest switches" surface hopping algorithm of Tully was adapted to deal with the nonadiabaticity in trajectory propagations. The SECH model has been applied to study the DR of both CH+ and H3O+(H2O)2. The theoretical results are consistent with the experiment. It was found that water molecules play an important role in determining the product branching ratios of the molecular cluster ion.

  8. Bio-Nano ECRIS: An electron cyclotron resonance ion source for new materials production

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, T. [Bio-Nano Electronics Research Centre, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Minezaki, H. [Graduate School of Engineering, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Tanaka, K.; Asaji, T. [Tateyama Machine Co., Ltd., 30 Shimonoban, Toyama, Toyama 930-1305 (Japan); Muramatsu, M.; Kitagawa, A. [National Institute of Radiological Sciences (NIRS), 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan); Biri, S. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem Ter 18/c (Hungary); Yoshida, Y. [Bio-Nano Electronics Research Centre, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Graduate School of Engineering, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan)

    2010-02-15

    We developed an electron cyclotron resonance ion source (ECRIS) for new materials production on nanoscale. Our main target is the endohedral fullerenes, which have potential in medical care, biotechnology, and nanotechnology. In particular, iron-encapsulated fullerene can be applied as a contrast material for magnetic resonance imaging or microwave heat therapy. Thus, our new ECRIS is named the Bio-Nano ECRIS. In this article, the recent progress of the development of the Bio-Nano ECRIS is reported: (i) iron ion beam production using induction heating oven and (ii) optimization of singly charged C{sub 60} ion beam production.

  9. Optimized collection of EoL electronic products for Circular economy: A techno-economic assessment

    DEFF Research Database (Denmark)

    Angouria-Tsorochidou, Elisavet; Cimpan, Ciprian; Parajuly, Keshav

    2018-01-01

    The relevance of a circular model is widely accepted for the lifecycle management of electrical and electronic products (e-products), given the low recovery rates of valuable resources in current end-of-life (EoL) practices focused on recycling. However, missing insight into the technical...... and business potential for alternative EoL options (reuse, repair and remanufacturing) holds stakeholders from implementing circular strategies. In this context, our study first mapped by means of material flow analysis (MFA) the life cycle stages of e-products in Denmark and then performed a preliminary...

  10. Identification of Degradation Products of Lincomycin and Iopromide by Electron Beam Irradiation

    International Nuclear Information System (INIS)

    Cha, Yongbyoung; Ham, Hyunsun; Myung, Seungwoon

    2013-01-01

    Lincomycin and Iopromide are major species among the Pharmaceuticals and Personal Care Products (PPCPs) from four major rivers in Korea. The structure characterization of six lincomycin's and two iopromide's degradation products formed under the irradiation of electron beam was performed, and the degradation efficiency as a function of the various irradiation dose and sample concentration was investigated. Electron beam (10 MeV, 0.5 mA and 5 kW) experiments for the structural characterization of the degradation products, which is fortified with lincomycin, were performed at the dose of 10 kGy. The separation of its degradation products and lincomycin was carried by C18 column (2.1 Χ 100 mm, 3.5 μm), using gradient elution with 20 mM ammonium acetate and acetonitrile. The structures of degradation products of lincomycin and iopromide were proposed by interpretation of mass spectra and chromatograms by LC/MS/MS, and also the mass fragmentation pathways of mass spectra in tandem mass spectrometry were proposed. The experiments of the degradation efficiency as a function of the irradiation dose intensity and the initial concentration of lincomycin in aqueous environment were performed, and higher dose of electron beam and lower concentration was observed the increased degradation efficiency

  11. Single Production of Excited Neutrino at Clic based Electron Photon Colliders

    International Nuclear Information System (INIS)

    Kirca, Z.

    2004-01-01

    The discovery of excited quarks and leptons, as predicted by composite models, would supply convincing evidence for substructure of fermions. Electron-photon interactions at very high energies provide ideal conditions to look for excited states of first generations offermions. In particular, in magnetic- transition coupling the electron to a gauge bo son would allow for single production of excited neutrinos (ν * ) through t-channel W boson exchange. In this work, (ν * ) production followed by the electroweak radiative decays ν * →νγ, ν * →eW, ν * →νZ is presented. The production cross sections and P T distributions of excited neutrino are studied for CLlC

  12. Quantitative trait loci for fertility traits in Finnish Ayrshire cattle

    Directory of Open Access Journals (Sweden)

    Viitala Sirja M

    2008-03-01

    Full Text Available Abstract A whole genome scan was carried out to detect quantitative trait loci (QTL for fertility traits in Finnish Ayrshire cattle. The mapping population consisted of 12 bulls and 493 sons. Estimated breeding values for days open, fertility treatments, maternal calf mortality and paternal non-return rate were used as phenotypic data. In a granddaughter design, 171 markers were typed on all 29 bovine autosomes. Associations between markers and traits were analysed by multiple marker regression. Multi-trait analyses were carried out with a variance component based approach for the chromosomes and trait combinations, which were observed significant in the regression method. Twenty-two chromosome-wise significant QTL were detected. Several of the detected QTL areas were overlapping with milk production QTL previously identified in the same population. Multi-trait QTL analyses were carried out to test if these effects were due to a pleiotropic QTL affecting fertility and milk yield traits or to linked QTL causing the effects. This distinction could only be made with confidence on BTA1 where a QTL affecting milk yield is linked to a pleiotropic QTL affecting days open and fertility treatments.

  13. Quantitative trait loci mapping for stomatal traits in interspecific ...

    Indian Academy of Sciences (India)

    Dr.YASODHA

    seedling raising, field planting and maintenance of the mapping population. ... tereticornis and production of interspecific hybrids displaying hybrid vigour in terms of .... A total of 114, 115 and 129 SSR, ISSR and SRAP markers were generated .... stomatal traits with yield and adaptability would help to improve productivity of ...

  14. Shallow irradiation of vienna sausage by electron beams in preventation of the slime production

    International Nuclear Information System (INIS)

    Watanabe, Hiroshi; Kume, Tamikazu; Ito, Hitoshi; Aoki, Shohei; Sato, Tomotaro

    1975-01-01

    Vienna sausages get spoiled by slime production or putrefaction due to the propagation of microorganisms when stored for 3 to 5 days at 10 deg C. The radiation pasteurization of vienna sausages has mainly been studied with gamma irradiation. The slime of sausages is believed to be microorganisms themselves growing on the surface of the sausages. Pasteurization of the surface of vienna sausages with electron irradiation was thus investigated. The results obtained are as follows: The vienna sausages irradiated with a dose of 0.8 to approximately 1.0 Mrad by 0.5 MeV electrons could be stored without slime production or putrefaction for more than a week at 11 deg C. The effect of pasteurization increased with energy and dose of electrons. However, the changes in the organoleptic qualities of vienna sausages were detected when irradiated with a dose of over 0.7 Mrad by 2.0 MeV electrons. Consequently, the irradiation with a dose of 1.0 Mrad by 1.0 MeV electrons was effectual in lengthening their shelf-life without deterioration of the organoleptic qualities. (author)

  15. Yields of primary products from chloroethylenes in air under electron beam irradiation

    International Nuclear Information System (INIS)

    Hakoda, Teruyuki; Hashimoto, Shoji; Kojima, Takuji

    2003-01-01

    The quantitative analysis of toxic primary irradiation products was carried out for the development of the purification technology of chloroethylenes/air mixtures using an electron beam (EB). Degradation of chloroethylenes in humid air proceeded through the formation of primary products retaining a carbon-carbon (C-C) bond such as chloroacetyl chlorides and chloroacetyl aldehyde as well as that of primary products of COCl 2 and HCOCl through C-C bond cleavage. Chloroethylenes having one carbon bonded to two Cl atoms was decomposed into the primary products retaining a C-C bond prior to breaking a C-C bond. The number of Cl atoms of a chloroethylene molecule enhanced the formation ratio of primary products retaining a C-C bond. On the other hand, chloroethylene having two carbons bonded to one Cl atom was degraded thought the scission of a C-C bond predominantly C-C bond maintenance. (author)

  16. Production and Detection of Spin-Entangled Electrons in Mesoscopic Conductors

    Science.gov (United States)

    Burkard, Guido

    2006-03-01

    Electron spins are an extremely versatile form of quantum bits. When localized in quantum dots, they can form a register for quantum computation. Moreover, being attached to a charge in a mesoscopic conductor allows the electron spin to play the role of a mobile carrier of quantum information similarly to photons in optical quantum communication. Since entanglement is a basic resource in quantum communication, the production and detection of spin-entangled Einstein-Podolsky-Rosen (EPR) pairs of electrons are of great interest. Besides the practical importance, it is of fundamental interest to test quantum non-locality for electrons. I review the theoretical schemes for the entanglement production in superconductor-normal junctions [1] and other systems. The electron spin entanglement can be detected and quantified from measurements of the fluctuations (shot noise) of the charge current after the electrons have passed through an electronic beam splitter [2,3]. This two-particle interference effect is related to the Hanbury-Brown and Twiss experiment and leads to a doubling of the shot noise SI=φ=0 for spin-entangled states, allowing their differentiation from unentangled pairs. I report on the role of spin-orbit coupling (Rashba and Dresselhaus) in a complete characterization of the spin entanglement [4]. Finally, I address the effects of a discrete level spectrum in the mesoscopic leads and of backscattering and decoherence.[1] P. Recher, E. V. Sukhorukov, D. Loss, Phys. Rev. B 63, 165314 (2001)[2] G. Burkard, D. Loss, E. V. Sukhorukov, Phys. Rev. B 61, R16303 (2000)[3] G. Burkard and D. Loss, Phys. Rev. Lett.91, 087903 (2003)[4] J. C. Egues, G. Burkard, D. Saraga, J. Schliemann, D. Loss, cond-mat/0509038, to appear in Phys.Rev.B (2005).

  17. Radiative corrections to chargino production in electron-positron collisions with polarized beams

    International Nuclear Information System (INIS)

    Diaz, Marco A.; King, Stephen F.; Ross, Douglas A.

    2001-01-01

    We study radiative corrections to chargino production at linear colliders with polarized electron beams. We calculate the one-loop corrected cross sections for polarized electon beams due to three families of quarks and squarks, working in the {ovr MS} scheme, extending our previous calculation of the unpolarized cross section with one-loop corrections due to the third family of quarks and squarks. In some cases we find rather large corrections to the tree-level cross sections. For example, for the case of right-handed polarized electrons and large tanβ the corrections can be of order 30%, allowing sensitivity to the squark mass parameters

  18. Production and applications of quasi-monoenergetic electron bunches in laser-plasma based accelerators

    International Nuclear Information System (INIS)

    Glinec, Y.; Faure, J.; Ewald, F.; Lifschitz, A.; Malka, V.

    2006-01-01

    Plasmas are attractive media for the next generation of compact particle accelerators because they can sustain electric fields larger than those in conventional accelerators by three orders of magnitude. However, until now, plasma-based accelerators have produced relatively poor quality electron beams even though for most practical applications, high quality beams are required. In particular, beams from laser plasma-based accelerators tend to have a large divergence and very large energy spreads, meaning that different particles travel at different speeds. The combination of these two problems makes it difficult to utilize these beams. Here, we demonstrate the production of high quality and high energy electron beams from laser-plasma interaction: in a distance of 3 mm, a very collimated and quasi-monoenergetic electron beam is emitted with a 0.5 nanocoulomb charge at 170 ± 20 MeV. In this regime, we have observed very nonlinear phenomena, such as self-focusing and temporal self-shortenning down to 10 fs durations. Both phenomena increase the excitation of the wakefield. The laser pulse drives a highly nonlinear wakefield, able to trap and accelerate plasma background electrons to a single energy. We will review the different regimes of electron acceleration and we will show how enhanced performances can be reached with state-of-the-art ultrashort laser systems. Applications such as gamma radiography of such electron beams will also be discussed

  19. Photo-production of (99)Mo/(99m)Tc with electron linear accelerator beam.

    Science.gov (United States)

    Avagyan, R; Avetisyan, A; Kerobyan, I; Dallakyan, R

    2014-09-01

    We report on the development of a relatively new method for the production of (99)Mo/(99m)Tc. The method involves the irradiation of natural molybdenum using high-intensity bremsstrahlung photons from the electron beam of the LUE50 linear electron accelerator located at the Yerevan Physics Institute (YerPhi). The production method has been developed and shown to be successful. The linear electron accelerator at YerPhi was upgraded to allow for significant increases of the beam intensity and spatial density. The LUE50 was also instrumented by a remote control system for ease of operation. We have developed and tested the (99m)Tc extraction from the irradiation of natural MoO3. This paper reports on the optimal conditions of our method of (99)Mo production. We show the success of this method with the production and separation of the first usable amounts of (99m)Tc. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Hydrogen production by using Rhodobacter capsulatus mutants with genetically modified electron transfer chains

    Energy Technology Data Exchange (ETDEWEB)

    OEztuerk, Yavuz; Yuecel, Meral; Guenduez, Ufuk [Department of Biology, Middle East Technical University, Ankara (Turkey); Daldal, Fevzi [Department of Biology, Plant Science Institute, University of Pennsylvania, Philadelphia, PA 19104-6018 (United States); Mandaci, Sevnur [TUEBITAK Research Institute for Genetic Engineering and Biotechnology, Gebze Kocaeli 41470 (Turkey); Tuerker, Lemi [Department of Chemistry, Middle East Technical University, Ankara (Turkey); Eroglu, Inci [Department of Chemical Engineering, Middle East Technical University, Ankara (Turkey)

    2006-09-15

    In Rhodobacter capsulatus excess reducing equivalents generated by organic acid oxidation is consumed to reduce protons into hydrogen by the activity of nitrogenase. Nitrogenase serves as a redox-balancing tool and is activated by the RegB/RegA global regulatory system during photosynthetic growth. The terminal cytochrome cbb{sub 3} oxidase and the redox state of the cyclic photosynthetic electron transfer chain serve redox signaling to the RegB/RegA regulatory systems in Rhodobacter. In this study, hydrogen production of various R. capsulatus strains harboring the genetically modified electron carrier cytochromes or lacking the cyt cbb{sub 3} oxidase or the quinol oxidase were compared with the wild type. The results indicated that hydrogen production of mutant strains with modified electron carrier cytochromes decreased 3- to 4-fold, but the rate of hydrogen production increased significantly in a cbb{sub 3}{sup -} mutant. Moreover, hydrogen production efficiency of various R. capsulatus strains further increased by inactivation of uptake hydrogenase genes. (author)

  1. Carcass traits of improved and indigenous lamb breeds of North-Western Turkey under an intensive production system

    Directory of Open Access Journals (Sweden)

    Omur Kocak

    2010-01-01

    Full Text Available The aim of study was to investigate the carcass quality of Turkish Merino, Ramlic, Kivircik, Chios and Imroz breeds in north-western Turkey under an intensive production system. After weaning at approximately 85 days of age, 46 lambs from Turkish Merino, Ramlic, Kivircik, Chios and Imroz breeds were fattened for 56 days. Slaughter weights were 47.39, 45.68, 47.27, 31.08 and 29.82 kg and chilled carcass weights were 23.35, 22.33, 23.51, 14.33 and 13.75 kg, respectively (P<0.001. Improved Turkish Merino and Ramlic and indigenous Kivircik lambs had higher carcass measurements than indigenous Chios and Imroz lambs. Chios lamb carcasses had the highest tail root fat yellowness and tail percentage while having the lowest fatness score, omental and mesenteric fat percentage and kidney knob and channel fat percentage. Turkish Merino lambs had higher shoulder percentage, lean percentage and lean/total fat ratio in the hind leg and produced less total fat in the hind leg than Ramlic and Kivircik lambs. These results indicate that improved Turkish Merino might be used to produce high quality lamb carcasses in north-western Turkey. Among indigenous breeds Kivircik showed an outstanding carcass production performance.

  2. Biomass production of intensively grown poplars in the southernmost part of Sweden: Observations of characters, traits and growth potential

    International Nuclear Information System (INIS)

    Christersson, Lars

    2006-01-01

    Observation of possibilities and problems was performed when trying to optimise growing conditions for high biomass production by irrigation and fertilisation in a clone test of poplar on sandy soil in the south of Sweden. One hundred and eight clones of pure Populus trichocarpa and hybrids between P. trichocarpa and P. deltoides were evaluated for growth rate, phenology, quality, frost hardiness and pest resistance. Some fertilisation experiments were performed. In some years, some unfertilised clones produced up to 2 kg m -2 of woody dry biomass. Some fertilised clones produced almost twice as much in the years following fertilisation. Stem canker was the main cause of serious injuries in all hybrids, but pure P. trichocarpa stems were not affected. The cimbicid sawfly (Cimbex lutea) caused damage to the quality of the trees in the form of curved stems of some clones. Winter frost killed top shoots of the hybrids in a year with particularly low winter temperatures with long duration. Summer frost (in June) killed up to 1 m of some young top shoots in some clones in the first 3-4 years. The results are discussed in terms of radiation utilisation efficiency, energy efficient ratio, and water and nutrient use efficiency. The discussion finishes with the conclusion that fertilisation, but not irrigation, can be economically motivated. If irrigation is to be economic, then the main objective of the whole operation should be to produce drinkable water from water polluted by society. Biomass production would then be a bonus

  3. Quantitative Trait Loci for Fertility Traits in Finnish Ayrshire Cattle

    DEFF Research Database (Denmark)

    Schulman, Nina F; Sahana, Goutam; Lund, Mogens S

    2008-01-01

    A whole genome scan was carried out to detect quantitative trait loci (QTL) for fertility traits in Finnish Ayrshire cattle. The mapping population consisted of 12 bulls and 493 sons. Estimated breeding values for days open, fertility treatments, maternal calf mortality and paternal non-return rate...... combinations, which were observed significant in the regression method. Twenty-two chromosome-wise significant QTL were detected. Several of the detected QTL areas were overlapping with milk production QTL previously identified in the same population. Multi-trait QTL analyses were carried out to test...... if these effects were due to a pleiotropic QTL affecting fertility and milk yield traits or to linked QTL causing the effects. This distinction could only be made with confidence on BTA1 where a QTL affecting milk yield is linked to a pleiotropic QTL affecting days open and fertility treatments...

  4. Production of Mg and Al Auger electrons by noble gas ion bombardment of Mg and Al surfaces. [3 KeV, electron promotion

    Energy Technology Data Exchange (ETDEWEB)

    Ferrante, J; Pepper, S V [National Aeronautics and Space Administration, Cleveland, Ohio (USA). Lewis Research Center

    1976-08-01

    In this letter the relative production efficiency of Mg and Al Auger electrons by He, Ne, Ar, Kr and Xe ion bombardment as a function of ion energy (<=3 keV) is reported. Some comments on the interpretation of the results in terms of electron promotion are also given.

  5. Sales of Nicotine-Containing Electronic Cigarette Products: United States, 2015.

    Science.gov (United States)

    Marynak, Kristy L; Gammon, Doris G; Rogers, Todd; Coats, Ellen M; Singh, Tushar; King, Brian A

    2017-05-01

    To assess the proportion of electronic cigarette (e-cigarette) products sold in the United States that contain nicotine according to retail scanner data. We obtained unit sales data from January 11, 2015, to December 12, 2015, from The Nielsen Company for convenience stores; supermarkets; mass merchandisers; drug, club, and dollar stores; and Department of Defense commissaries. The data did not include purchases from tobacco specialty shops, "vape shops," or online sources. Nicotine content was assessed by product type (disposables, rechargeables, and refills), region, and flavor status based on nicotine strength listed in the Universal Product Codes. For the 36.7% of entries lacking nicotine content information, we conducted Internet searches by brand, product, and flavor. In 2015, 99.0% of e-cigarette products sold contained nicotine, including 99.0% of disposables, 99.7% of rechargeables, and 98.8% of refills. Overall, 98.7% of flavored e-cigarette products and 99.4% of nonflavored e-cigarette products contained nicotine. In 2015, almost all e-cigarette products sold in US convenience stores and other assessed channels contained nicotine. Public Health Implications. Findings reinforce the importance of warning labels for nicotine-containing products, ingredient reporting, and restrictions on sales to minors.

  6. Partial Results Regarding Exploitation Characteristics, Morpho-Productive Traits for Saanen Breed Goats in South of the Country

    Directory of Open Access Journals (Sweden)

    Iulian Vlad

    2012-10-01

    Full Text Available Over about 92% from national goat livestock come from local unameliorated breeds, namely Carpathian breed whichis traditionally exploited in a mixed way next to sheep in a proportion of over 65% from the breed total.Expectations towards a qualitative and quantitative production led to pretty important imports for specialized breedslike the Saanen one, from communitary states, during the last 10 years.This study presents the results of someresearch started since the last semestre of the previous year on some goat livestock from Saanen breed, livestockwhich was brought to the Garbovi farm, Ialomita county. The livestock presents the following morpho-productivetraits, such as: weight 57.375±0.23 Kg as an average, back length 67.47±0,38cm, crupper length 69.25±0,41 cm,oblique body length 70,98±0,38 cm, thoracical perimeter 89.17cm±0.32 cm, resulting a dolicomorphe body structure.The medium milk production in is of 2.19 l/head/day during the stalling months November-February, with average ofNovember 58.05±1.77 l.,December 70.47±2,07 l.,January 92.30±2.93 l., and February 45.10±1.38 l.,only during thefirst 120 days, and the chemical composition of the main constituent parts: Dry matter nonfat 9.3%, protein 3.53%,fat 4.02%, a significant quantitative and qualitative gain of goat milk especially when the local breeds don’t yieldthem.The females prolificity is of 128%, being a lot below the breed average 150-170% in comparison with theaverage proven by the breed but also in comparison with the unameliorated breeds, this aspect being also a basicalelement in selection, next to the milk quantitative aspect. The gain recorded for goat youth over the 90 days iscomprised between 127g, 198g, 122g/day of males and 109g, 173g, 106 g/day of females, during the whole periodwhich was much over the average of Carpathian breed. Shortage of some agricultural policies on breed, of trainedstaff in the farm,speciality information concerning the exploitation of

  7. Effects of two different prepartum diets on some metabolic traits and productive response in multiparous Holstein cows in early lactation

    Directory of Open Access Journals (Sweden)

    Gianfranco Gabai

    2010-01-01

    Full Text Available Twenty-six multiparous Italian Holstein cows were used to compare two feeding strategies for the prepartum period. Cowswere allocated to two dietary treatments on the basis of their parity (3.1 ± 1.1 and mature equivalent production (11473± 1449 kg. From 20 ± 7 d precalving to the calving day, one group of 13 cows (parity = 3.1 ± 1.0; mature equivalentproduction = 11473 ± 1606 kg was fed a Control diet made by mixing a 50:50 as fed combination of the far off dryration and the lactation diet fed postpartum. The remaining cows (parity = 3.1 ± 1.1; mature equivalent production =11473 ± 1338 kg were fed a prepartum diet (Anionic obtained by supplementing the far off dry ration with energy andprotein sources plus calcium chloride. This diet had a lower dietary cation-anion difference than the Control diet (7.35 vs26.66 meq/100 g DM; Pfed the Anionic diet had the lowest DM intake during the prepartum (12.0 vs 13.4 kg/d; Pshowed a limited drop in plasma Ca reducing the incidence of subclinical hypocalcaemia in comparison with the Controlgroup (8 vs 62%; Pof hepatic function (aspartate-amino transferase, ϒ-glutamil transferase, creatin-kinase and bilirubine. After calving,all the cows were co-mingled and fed the same lactation ration and those that had received the Anionic diet duringthe prepartum showed a significant increase in milk yield with no changes in milk quality. Average production at the peakof lactation was 43.8 kg/d for Control cows while it raised up to 47.8 kg/d (Pduring the prepartum. This positive result was obtained with a lower loss in cows’ body condition score measured at 30and 60 days in milk and without any effect on the uterine involution process. The use of the Anionic diet has proven tobe an effective alternative to the common practice of feeding close-up diets made by a partial replacement of the far offdry ration with the diet fed to the lactating cows. This strategy should be particularly recommended for dairy

  8. 78 FR 27303 - Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron...

    Science.gov (United States)

    2013-05-10

    ...-0178] Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron... electron beam and x-ray sources for irradiation of poultry feed and poultry feed ingredients. This action... CFR part 579) to provide for the safe use of electron beam and x-ray sources for irradiation of...

  9. Beauty production in pp collisions at s=2.76 TeV measured via semi-electronic decays

    NARCIS (Netherlands)

    Abelev, B.; Adam, J.; Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agostinelli, A.; Agrawal, N.; Ahammed, Z.; Ahmad, N.; Ahmed, I.; Ahn, S. U.; Ahn, S. A.; Aimo, I.; Aiola, S.; Ajaz, M.; Akindinov, A.; Alam, S. N.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alici, A.; Alkin, A.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; Andrei, C.; Andronic, A.; Anguelov, V.; Anielski, J.; Anticic, T.; Antinori, F.; Antonioli, P.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Armesto, N.; Arnaldi, R.; Aronsson, T.; Arsene, I. C.; Arslandok, M.; Augustinus, A.; Averbeck, R.; Awes, T. C.; Azmi, M. D.; Bach, M.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Baltasar Dos Santos Pedrosa, F.; Baral, R. C.; Barbera, R.; Barile, F.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartke, J.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Baumann, C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bellwied, R.; Belmont-Moreno, E.; Belmont, R.; Belyaev, V.; Bencedi, G.; Beole, S.; Berceanu, I.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Berger, M. E.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielcík, J.; Bielcíková, J.; Bilandzic, A.; Bjelogrlic, S.; Blanco, F.; Blau, D.; Blume, C.; Bock, F.; Bogdanov, A.; Bøggild, H.; Bogolyubsky, M.; Böhmer, F. V.; Boldizsár, L.; Bombara, M.; Book, J.; Borel, H.; Borissov, A.; Bossú, F.; Botje, M.; Botta, E.; Böttger, S.; Braun-Munzinger, P.; Bregant, M.; Breitner, T.; Broker, T. A.; Browning, T. A.; Broz, M.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buncic, P.; Busch, O.; Buthelezi, Z.; Caffarri, D.; Cai, X.; Caines, H.; Calero Diaz, L.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Carena, F.; Carena, W.; Castillo Castellanos, J.; Casula, E. A R; Catanescu, V.; Cavicchioli, C.; Ceballos Sanchez, C.; Cepila, J.; Cerello, P.; Chang, B.; Chapeland, S.; Charvet, J. L.; Chattopadhyay, S.; Chattopadhyay, S.; Chelnokov, V.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Chochula, P.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortese, P.; Cortés Maldonado, I.; Cosentino, M. R.; Costa, F.; Crochet, P.; Cruz Albino, R.; Cuautle, E.; Cunqueiro, L.; Dainese, A.; Dang, R.; Danu, A.; Das, D.; Das, I.; Das, K.; Das, S.; Dash, A.; Dash, S.; De, S.; Delagrange, H.; Deloff, A.; Dénes, E.; D'Erasmo, G.; De Caro, A.; de Cataldo, G.; de Cuveland, J.; De Falco, A.; De Gruttola, D.; De Marco, N.; De Pasquale, S.; de Rooij, R.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Di Bari, D.; Di Liberto, S.; Di Mauro, A.; Di Nezza, P.; Djuvsland, O.; Dobrin, A.; Dobrowolski, T.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Dørheim, S.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Dupieux, P.; Dutta Majumdar, A. K.; Hilden, T. E.; Ehlers, R. J.; Elia, D.; Engel, H.; Erazmus, B.; Erdal, H. A.; Eschweiler, D.; Espagnon, B.; Esposito, M.; Estienne, M.; Esumi, S.; Evans, D.; Evdokimov, S.; Fabris, D.; Faivre, J.; Falchieri, D.; Fantoni, A.; Fasel, M.; Fehlker, D.; Feldkamp, L.; Felea, D.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Figiel, J.; Figueredo, M. A S; Filchagin, S.; Finogeev, D.; Fionda, F. M.; Fiore, E. M.; Floratos, E.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Frankenfeld, U.; Fuchs, U.; Furget, C.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gallio, M.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Gargiulo, C.; Garishvili, I.; Gerhard, J.; Germain, M.; Gheata, A.; Gheata, M.; Ghidini, B.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Gladysz-Dziadus, E.; Glässel, P.; Gomez Ramirez, A.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Graczykowski, L. K.; Grelli, A.; Grigoras, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grinyov, B.; Grion, N.; Grosse-Oetringhaus, J. F.; Grossiord, J. Y.; Grosso, R.; Guber, F.; Guernane, R.; Guerzoni, B.; Guilbaud, M.; Gulbrandsen, K.; Gulkanyan, H.; Gumbo, M.; Gunji, T.; Gupta, A.; Gupta, R.; Khan, K. H.; Haake, R.; Haaland, O.; Hadjidakis, C.; Haiduc, M.; Hamagaki, H.; Hamar, G.; Hanratty, L. D.; Hansen, A.; Harris, J. W.; Hartmann, H.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Heide, M.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Hess, B. A.; Hetland, K. F.; Hippolyte, B.; Hladky, J.; Hristov, P.; Huang, M.; Humanic, T. J.; Hussain, N.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Ilkiv, I.; Inaba, M.; Innocenti, G. M.; Ionita, C.; Ippolitov, M.; Irfan, M.; Ivanov, M.; Ivanov, V.; Jacholkowski, A.; Jacobs, P. M.; Jahnke, C.; Jang, H. J.; Janik, M. A.; Jayarathna, P. H S Y; Jena, C.; Jena, S.; Jimenez Bustamante, R. T.; Jones, P. G.; Jung, H.; Jusko, A.; Kadyshevskiy, V.; Kalcher, S.; Kalinak, P.; Kalweit, A.; Kamin, J.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L D; Khan, M. M.; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Kileng, B.; Kim, B.; Kim, D. W.; Kim, D. J.; Kim, J. S.; Kim, M.; Kim, M.; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, J.; Klein-Bösing, C.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobdaj, C.; Kofarago, M.; Köhler, M. K.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Konevskikh, A.; Kovalenko, V.; Kowalski, M.; Kox, S.; Koyithatta Meethaleveedu, G.; Kral, J.; Králik, I.; Kravcáková, A.; Krelina, M.; Kretz, M.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kucera, V.; Kucheriaev, Y.; Kugathasan, T.; Kuhn, C.; Kuijer, P. G.; Kulakov, I.; Kumar, J.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kushpil, S.; Kweon, M. J.; Kwon, Y.; Ladron de Guevara, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lara, C.; Lardeux, A.; Lattuca, A.; La Pointe, S. L.; La Rocca, P.; Lea, R.; Leardini, L.; Lee, G. R.; Legrand, I.; Lehnert, J.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; Leoncino, M.; León Monzón, I.; Lévai, P.; Li, S.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Ljunggren, H. M.; Lodato, D. F.; Loenne, P. I.; Loggins, V. R.; Loginov, V.; Lohner, D.; Loizides, C.; Lopez, X.; López Torres, E.; Lu, X. G.; Luettig, P.; Lunardon, M.; Luparello, G.; Ma, R.; Maevskaya, A.; Mager, M.; Mahapatra, D. P.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manceau, L.; Manko, V.; Manso, F.; Manzari, V.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Marín, A.; Markert, C.; Marquard, M.; Martashvili, I.; Martin, N. A.; Martinengo, P.; Martínez, M. I.; Martínez García, G.; Martin Blanco, J.; Martynov, Y.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Massacrier, L.; Mastroserio, A.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzoni, M. A.; Meddi, F.; Menchaca-Rocha, A.; Mercado Pérez, J.; Meres, M.; Miake, Y.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Mischke, A.; Mishra, A. N.; Miskowiec, D.; Mitra, J.; Mitu, C. M.; Mlynarz, J.; Mohammadi, N.; Mohanty, B.; Molnar, L.; Montaño Zetina, L.; Montes, E.; Morando, M.; Moreira De Godoy, D. A.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Müller, H.; Munhoz, M. G.; Murray, S.; Musa, L.; Musinsky, J.; Nandi, B. K.; Nania, R.; Nappi, E.; Nattrass, C.; Nayak, K.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Nicassio, M.; Niculescu, M.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Nilsen, B. S.; Noferini, F.; Nomokonov, P.; Nooren, G.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Oh, S. K.; Okatan, A.; Olah, L.; Oleniacz, J.; Oliveira Da Silva, A. C.; Onderwaater, J.; Oppedisano, C.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Sahoo, P.; Pachmayer, Y.; Pachr, M.; Pagano, P.; Paic, G.; Painke, F.; Pajares, C.; Pal, S. K.; Palmeri, A.; Pant, D.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, W. J.; Parmar, S.; Passfeld, A.; Patalakha, D. I.; Paticchio, V.; Paul, B.; Pawlak, T.; Peitzmann, T.; Pereira Da Costa, H.; Pereira De Oliveira Filho, E.; Peresunko, D.; Pérez Lara, C. E.; Pesci, A.; Peskov, V.; Pestov, Y.; Petrácek, V.; Petran, M.; Petris, M.; Petrovici, M.; Petta, C.; Piano, S.; Pikna, M.; Pillot, P.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Ploskon, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L M; Poghosyan, M. G.; Pohjoisaho, E. H O; Polichtchouk, B.; Poljak, N.; Pop, A.; Porteboeuf-Houssais, S.; Porter, J.; Potukuchi, B.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Rauf, A. W.; Razazi, V.; Read, K. F.; Real, J. S.; Redlich, K.; Reed, R. J.; Rehman, A.; Reichelt, P.; Reicher, M.; Reidt, F.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Rettig, F.; Revol, J. P.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Rivetti, A.; Rocco, E.; Rodríguez Cahuantzi, M.; Rodriguez Manso, A.; Røed, K.; Rogochaya, E.; Rohni, S.; Rohr, D.; Röhrich, D.; Romita, R.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Sadovsky, S.; Šafarík, K.; Sahlmuller, B.; Sahoo, R.; Sahu, P. K.; Saini, J.; Sakai, S.; Salgado, C. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Sanchez Castro, X.; Sánchez Rodríguez, F. J.; Šándor, L.; Sandoval, A.; Sano, M.; Santagati, G.; Sarkar, D.; Scapparone, E.; Scarlassara, F.; Scharenberg, R. P.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schuchmann, S.; Schukraft, J.; Schulc, M.; Schuster, T.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Segato, G.; Seger, J. E.; Sekiguchi, Y.; Selyuzhenkov, I.; Seo, J.; Serradilla, E.; Sevcenco, A.; Shabetai, A.; Shabratova, G.; Shahoyan, R.; Shangaraev, A.; Sharma, N.; Sharma, S.; Shigaki, K.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Singaraju, R.; Singh, R.; Singha, S.; Singhal, V.; Sinha, B. C.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Skjerdal, K.; Slupecki, M.; Smirnov, N.; Snellings, R. J M; Søgaard, C.; Soltz, R.; Song, J.; Song, M.; Soramel, F.; Sorensen, S.; Spacek, M.; Spiriti, E.; Sputowska, I.; Spyropoulou-Stassinaki, M.; Srivastava, B. K.; Stachel, J.; Stan, I.; Stefanek, G.; Steinpreis, M.; Stenlund, E.; Steyn, G.; Stiller, J. H.; Stocco, D.; Stolpovskiy, M.; Strmen, P.; Suaide, A. A P; Sugitate, T.; Suire, C.; Suleymanov, M.; Sultanov, R.; Šumbera, M.; Susa, T.; Symons, T. J M; Szabo, A.; Szanto de Toledo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Takahashi, J.; Tangaro, M. A.; Tapia Takaki, J. D.; Tarantola Peloni, A.; Tarazona Martinez, A.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terrevoli, C.; Thäder, J.; Thomas, D.; Tieulent, R.; Timmins, A. R.; Toia, A.; Trubnikov, V.; Trzaska, W. H.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Uras, A.; Usai, G. L.; Vajzer, M.; Vala, M.; Valencia Palomo, L.; Vallero, S.; Vande Vyvre, P.; Van Der Maarel, J.; Van Hoorne, J. W.; van Leeuwen, M.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vechernin, V.; Veldhoen, M.; Velure, A.; Venaruzzo, M.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Verweij, M.; Vickovic, L.; Viesti, G.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Vinogradov, A.; Vinogradov, L.; Vinogradov, Y.; Virgili, T.; Viyogi, Y. P.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Vranic, D.; Vrláková, J.; Vulpescu, B.; Vyushin, A.; Wagner, B.; Wagner, J.; Wagner, V.; Wang, M.; Wang, Y.; Watanabe, D.; Weber, M.; Wessels, J. P.; Westerhoff, U.; Wiechula, J.; Wikne, J.; Wilde, M.; Wilk, G.; Wilkinson, J.; Williams, M. C S; Windelband, B.; Winn, M.; Yaldo, C. G.; Yamaguchi, Y.; Yang, H.; Yang, P.; Yang, S.; Yano, S.; Yasnopolskiy, S.; Yi, J.; Yin, Z.; Yoo, I. K.; Yushmanov, I.; Zaccolo, V.; Zach, C.; Zaman, A.; Zampolli, C.; Zaporozhets, S.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zgura, I. S.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, F.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zhu, X.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zinovjev, G.; Zoccarato, Y.; Zyzak, M.

    2014-01-01

    The ALICE Collaboration at the LHC reports measurement of the inclusive production cross section of electrons from semi-leptonic decays of beauty hadrons with rapidity |y|<0.8 and transverse momentum 1Electrons not originating from semi-electronic decay

  10. Electron beam production and characterization for the PLEIADES Thomson X-ray source

    International Nuclear Information System (INIS)

    Brown, W.J.; Hartemann, F.V.; Tremaine, A.M.; Springer, P.T.; Le Sage, G.P.; Barty, C.P.J.; Crane, J.K.; Cross, R.R.; Fittinghoff, D.N.; Slaughter, D.R.; Rosenzweig, J.B.; Anderson, S.; Gibson, D.J.

    2002-01-01

    We report on the performance of an S-band RF photocathode electron gun and accelerator for operation with the PLEIADES Thomson x-ray source at LLNL. Simulations of beam production, transport, and focus are presented. It is shown that a 1 ps, 500 pC electron bunch with a normalized emittance of less than 5 πmm-mrad can be delivered to the interaction point. Initial electron measurements are presented. Calculations of expected x-ray flux are also performed, demonstrating an expected peak spectral brightness of 1020 photons/s/mm2/mrad2/0.1% bandwidth. Effects of RF phase jitter are also presented, and planned phase measurements and control methods are discussed

  11. Electron-positron pair production in Coulomb collisions at ultrarelativistic energies

    International Nuclear Information System (INIS)

    Vane, C.R.; Datz, S.; Dittner, P.F.; Krause, H.F.; Bottcher, C.; Strayer, M.; Schuch, R.; Gao, H.; Hutton, R.

    1993-01-01

    We have measured angular and momentum distributions for electrons and positrons created as pairs in peripheral collisions of 6.4 TeV bare sulfur ions with fixed targets of Al, Pd, and Au. Singly- and doubly-differential cross sections have been determined for 1--17 MeV/c electrons and positrons detected independently and in coincidence as pairs. Integrated yields for pair production are found to vary as the square of the target nuclear charge. Relative angular and momentum differential cross sections are effectively target independent. Probability distributions for the pair total momentum, the positron fraction of the pair momentum, and the pair traverse momentum have been derived from the coincident electron-positron data

  12. New electron-ion-plasma equipment for modification of materials and products surface

    International Nuclear Information System (INIS)

    Koval', N.N.

    2013-01-01

    Electron-ion-plasma treatment of materials and products, including surface clearing and activation, formation surface layers with changed chemical and phase structure, increased hardness and corrosion resistance; deposition of various functional coatings, has received a wide distribution in a science and industry. Widespread methods of ion-plasma modification of material and product surfaces are ion etching and activation, ion-plasma nitriding, arc or magnetron deposition of functional coatings, including nanostructured. The combination of above methods of surface modification allows essentially to improve exploitation properties of treated products and to optimize the characteristics of modified surfaces for concrete final requirements. For the purpose of a combination of various methods of ion-plasma treatment in a single work cycle at Institute of High Current Electronics of SB RAS (IHCE SB RAS) specialized technological equipment 'DUET', 'TRIO' and 'QUADRO' and 'KVINTA' have been developed. This equipment allow generating uniform low-temperature gas plasma at pressures of (0.1-1) Pa with concentration of (10 9 -10 11 ) cm -3 in volume of (0.1-1) m 3 . In the installations consistent realization of several various operations of materials and products treatment in a single work cycle is possible. The operations are preliminary heating and degassing, ion clearing, etching and activation of materials and products surface by plasma of arc discharges; chemicothermal treatment (nitriding) for formation of diffusion layer on a surface of treated sample using plasma of nonself-sustained low-pressure arc discharge; deposition of single- or multilayered superhard (≥40 GPa) nanocrystalline coatings on the basis of pure metals or their compounds (nitrides, carbides, carbonitrides) by the arc plasma-assisted method. For realization of the modes all installations are equipped by original sources of gas and metal plasma. Besides, in

  13. 75 FR 38127 - Visteon Systems, LLC North Penn Plant Electronics Products Group Including On-Site Leased Workers...

    Science.gov (United States)

    2010-07-01

    ..., North Penn Plant, Electronics Products Group to be covered by this certification. The intent of the... North Penn Plant Electronics Products Group Including On-Site Leased Workers From Ryder Integrated... Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment...

  14. Reactive Oxygen Species Production by Forward and Reverse Electron Fluxes in the Mitochondrial Respiratory Chain

    Science.gov (United States)

    Selivanov, Vitaly A.; Votyakova, Tatyana V.; Pivtoraiko, Violetta N.; Zeak, Jennifer; Sukhomlin, Tatiana; Trucco, Massimo; Roca, Josep; Cascante, Marta

    2011-01-01

    Reactive oxygen species (ROS) produced in the mitochondrial respiratory chain (RC) are primary signals that modulate cellular adaptation to environment, and are also destructive factors that damage cells under the conditions of hypoxia/reoxygenation relevant for various systemic diseases or transplantation. The important role of ROS in cell survival requires detailed investigation of mechanism and determinants of ROS production. To perform such an investigation we extended our rule-based model of complex III in order to account for electron transport in the whole RC coupled to proton translocation, transmembrane electrochemical potential generation, TCA cycle reactions, and substrate transport to mitochondria. It fits respiratory electron fluxes measured in rat brain mitochondria fueled by succinate or pyruvate and malate, and the dynamics of NAD+ reduction by reverse electron transport from succinate through complex I. The fitting of measured characteristics gave an insight into the mechanism of underlying processes governing the formation of free radicals that can transfer an unpaired electron to oxygen-producing superoxide and thus can initiate the generation of ROS. Our analysis revealed an association of ROS production with levels of specific radicals of individual electron transporters and their combinations in species of complexes I and III. It was found that the phenomenon of bistability, revealed previously as a property of complex III, remains valid for the whole RC. The conditions for switching to a state with a high content of free radicals in complex III were predicted based on theoretical analysis and were confirmed experimentally. These findings provide a new insight into the mechanisms of ROS production in RC. PMID:21483483

  15. Multiple electromagnetic electron-positron pair production in relativistic heavy-ion collisions

    International Nuclear Information System (INIS)

    Alscher, A.; Hencken, K.; Trautmann, D.; Baur, G.

    1997-01-01

    We calculate the cross sections for the production of one and more electron-positron pairs due to the strong electromagnetic fields in relativistic heavy-ion collisions. We derive the N-pair amplitude using the generating functional of fermions in an external field and the path-integral formalism. The N-pair production probability is found to be an approximate Poisson distribution. We calculate total cross sections for the production of one pair in lowest order, including corrections from the Poisson distribution up to third order. Furthermore, we calculate cross sections for the production of up to five pairs including corrections from the Poisson distribution. copyright 1997 The American Physical Society

  16. Use of a MS-electronic nose for prediction of early fungal spoilage of bakery products.

    Science.gov (United States)

    Marín, S; Vinaixa, M; Brezmes, J; Llobet, E; Vilanova, X; Correig, X; Ramos, A J; Sanchis, V

    2007-02-28

    A MS-based electronic nose was used to detect fungal spoilage (measured as ergosterol concentration) in samples of bakery products. Bakery products were inoculated with different Eurotium, Aspergillus and Penicillium species, incubated in sealed vials and their headspace sampled after 2, 4 and 7 days. Once the headspace was sampled, ergosterol content was determined in each sample. Different electronic nose signals were recorded depending on incubation time. Both the e-nose signals and ergosterol levels were used to build models for prediction of ergosterol content using e-nose measurements. Accuracy on prediction of those models was between 87 and 96%, except for samples inoculated with Penicillium corylophilum where the best predictions only reached 46%.

  17. Heterogeneous semiconductor photocatalysts for hydrogen production from aqueous solutions of electron donors

    Science.gov (United States)

    Kozlova, E. A.; Parmon, V. N.

    2017-09-01

    Current views on heterogeneous photocatalysts for visible- and near-UV-light-driven production of molecular hydrogen from water and aqueous solutions of inorganic and organic electron donors are analyzed and summarized. Main types of such photocatalysts and methods for their preparation are considered. Particular attention is paid to semiconductor photocatalysts based on sulfides that are known to be sensitive to visible light. The known methods for increasing the quantum efficiency of the target process are discussed, including design of the structure, composition and texture of semiconductor photocatalysts and variation of the medium pH and the substrate and photocatalyst concentrations. Some important aspects of the activation and deactivation of sulfide photocatalysts and the evolution of their properties in the course of hydrogen production processes in the presence of various types of electron donors are analyzed. The bibliography includes 276 references.

  18. Production of iodine-123 radiobiological specimen on 25 MeV electron beam

    International Nuclear Information System (INIS)

    Oganesyan, Yu.Ts.; Starodub, G.Ya.; Buklanov, G.V.; Korotkin, Yu.S.; Belov, A.G.

    1988-01-01

    The technique is described and experimental results are presented for production of radioactive specimen-iodine-123 for medical biological investigations. It is shown that in ten hour irradiation of 124 Xe enriched target of 10 g weight by the 25 MeV electron beam at MT-25 microtron short lived 123 I with activity of about 200 mCl can be accumulated. The procedure was developed for extraction of radioactive atoms and preparing the solution that permits to obtain during 1-1.5 h after the end of irradiation the specimen which satisfies all pharmacopeia requirements. It follows from the results that using small-size electron accelerators with the beam energy up to 25 MeV permits to organize economical and large-scale production of high quality radioactive specimen of 123 I for servicing a large region of this country. 14 refs.; 4 figs.; 1 tab

  19. Polarized electrode enhances biological direct interspecies electron transfer for methane production in upflow anaerobic bioelectrochemical reactor.

    Science.gov (United States)

    Feng, Qing; Song, Young-Chae; Yoo, Kyuseon; Kuppanan, Nanthakumar; Subudhi, Sanjukta; Lal, Banwari

    2018-08-01

    The influence of polarized electrodes on the methane production, which depends on the sludge concentration, was investigated in upflow anaerobic bioelectrochemical (UABE) reactor. When the polarized electrode was placed in the bottom zone with a high sludge concentration, the methane production was 5.34 L/L.d, which was 53% higher than upflow anaerobic sludge blanket (UASB) reactor. However, the methane production was reduced to 4.34 L/L.d by placing the electrode in the upper zone of the UABE reactor with lower sludge concentration. In the UABE reactor, the methane production was mainly improved by the enhanced biological direct interspecies electron transfer (bDIET) pathway, and the methane production via the electrode was a minor fraction of less than 4% of total methane production. The polarized electrodes that placed in the bottom zone with a high sludge concentration enhance the bDIET for methane production in the UABE reactor and greatly improve the methane production. Copyright © 2018. Published by Elsevier Ltd.

  20. New electron beam facility for R and D and production at acsion industries

    Energy Technology Data Exchange (ETDEWEB)

    Lopata, V.J.; Barnard, J.W.; Saunders, C.B.; Stepanik, T.M. E-mail: stepanik@acsion.com

    2003-08-01

    Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R and D capabilities. These modifications are described in this paper.

  1. Reestimation of the production spectra of cosmic ray secondary positrons and electrons in the ISM

    Science.gov (United States)

    Wong, C. M.; Ng, L. K.

    1985-01-01

    A detailed calculation of the production spectra of charged hadrons produced by interactions of cosmic rays in the interstellar medium is presented along with a thorough treatment of pion and muon decays. Newly parameterized inclusive cross sections of hadrons were used and exact kinematic limitations were taken into account. Single parametrized expressions for the production spectra of both secondary positrons and electrons in the energy range .1 to 100 GeV are presented. The results are compared with other authors' predictions. Equilibrium spectra using various models are also presented.

  2. New electron beam facility for R&D and production at acsion industries

    Science.gov (United States)

    Lopata, V. J.; Barnard, J. W.; Saunders, C. B.; Stepanik, T. M.

    2003-08-01

    Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R&D capabilities. These modifications are described in this paper.

  3. Neutron production in the interaction of electrons with a dispersing lamella

    International Nuclear Information System (INIS)

    Soto B, T. G.; Baltazar R, A.; Medina C, D.; Vega C, H. R.

    2017-10-01

    When a Linac for radiotherapy operates with acceleration voltages greater than 8 MV, neutrons are produced as secondary radiation. They deposit an undesirable and not negligible dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, cancer treatment with a Linac is done with photon or electron beams, which produce neutrons through reactions (γ, n) and e, e n) respectively. Because the effective section of the reaction (n, γ) is 137 times greater than the reaction (e, e n), most studies have focused on photo neutrons. When a Linac operates with electron beams, the beam that leaves the magnetic baffle is incised in the dispersion foil in order to cause quasi-elastic interactions and expand the spatial distribution of the electrons; in their interaction with the lamella the electrons produce photons and these in turn produce neutrons. Due to the radiobiological efficiency of neutrons and the ways in which they interact with matter, is important to determine the neutrons production in Linacs operating in electron mode. The objective of this work is to determine the characteristics of photons and neutrons that occur when a beam of mono-energetic electrons of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm thick located in the center of a 10 cm thick tungsten shell, used to represent the accelerator head. The study was carried out using the Monte Carlo method with the MCNP6 code for electron beams of 12 and 18 MeV. The spectra of photons and neutrons were estimated in 6 point detectors, four were placed in different points equidistant from the center of the lamella and the other two were located at 50 cm and 1 m from the electron beam, simulating the totally closed head. In this work it was found that when a Linac operates with an electron beam of 12 or 18 MeV there is neutron production mainly in the head and in the direction of the beam. (Author)

  4. Ecofunctional Traits and Biomass Production in Leguminous Tree Species under Fertilization Treatments during Forest Restoration in Amazonia

    Directory of Open Access Journals (Sweden)

    Roberto K. Jaquetti

    2016-04-01

    Full Text Available Background: Choosing the correct species and fertilization treatments is a determining factor in the success of forest restoration. Methods: A field study was conducted in a degraded area near the Balbina hydroelectric dam in Amazonas State (AM, Brazil, to evaluate two hypotheses: (i leguminous tree species exhibit differences in growth, leaf nutrient content, and photosynthetic nutrient use efficiencies; and (ii differences in these characteristics depend on the fertilization treatments to which the species have been subjected. Dipteryx odorata, Inga edulis and Schizolobium amazonicum were subjected to the following treatments: (T1 unfertilized control; (T2 post-planting chemical fertilization; (T3 post-planting organic fertilization and (T4 combined chemical and organic post-planting fertilization. Results: In general, I. edulis had the highest absolute growth rate of biomass under all of the fertilization treatments. I. edulis and S. amazonicum showed the highest growth rates under the T4 treatment. D. odorata showed the greatest responses under the T2 and T4 treatments. Native leguminous trees with higher photosynthetic performance and better nutrient use efficiency exhibited greater growth and biomass production. Conclusion: The results suggest that an adequate balance between leguminous species selection and fertilization will aid in the success of forest restoration in Amazonia.

  5. A study of success and failure in product innovation with specific reference to the South African electronics industry

    OpenAIRE

    2014-01-01

    M.Com. (Business Management) The innovation and marketing of new products has become increasingly important for the profitability of companies. Developing new products is a risky endeavour. Research shows that new product development often fails. As such, it is very important that product development managers are aware of the factors that can cause product failure. This research studied the product innovation process in the South African electronics industry. The objective of the study was...

  6. Defect production and subsequent effects induced by electronic energy loss of swift heavy ion

    International Nuclear Information System (INIS)

    Hou Mingdong; Liu Jie; Sun Youmei; Yin Jingmin; Yao Huijun; Duan Jinglai; Mo Dan; Zhang Ling; Chen Yanfeng; Chinese Academy of Sciences, Beijing

    2008-01-01

    Swift heavy ion in matter is one of forfront fields of nuclear physics in the world. A series of new phenomena were discovered in recent years. The history and sta- tus on the development of this field were reviewed. Electronic energy loss effects induced by swift heavy ion irradiation, such as defect production and evolution, ion latent track formation, phase transformation and anisotropy plastic deformation were introduced emphatically. A trend of future investigation was explored. (authors)

  7. Managing innovation in SMEs product development in small Irish electronics firms

    CERN Document Server

    Ledwith, Ann; Bessant, John

    2009-01-01

    Innovating and developing new products is critical for the survival and growth of any small firm but particularly for technology based firms. This study of NPD at small Irish electronics firms makes two main contributions to knowledge. Firstly, the management of NPD at small firms is found to be different from that at large firms in several respects including; NPD resources and expenditure, organising for NPD, NPD process proficiency, marketing and technical skills and proficiency, R&D/marke...

  8. Study of electron pair production below the Z mass at the CERN anti pp collider

    International Nuclear Information System (INIS)

    Alitti, J.; Ambrosini, G.; Ansari, R.; Autiero, D.; Bareyre, P.; Bertram, I.A.; Blaylock, G.; Bonamy, P.; Borer, K.; Bourliaud, M.; Buskulic, D.; Carboni, G.; Cavalli, D.; Cavasinni, V.; Cenci, P.; Chollet, J.C.; Conta, C.; Costa, G.; Costantini, F.; Cozzi, L.; Cravero, A.; Curatolo, M.; Dell'Acqua, A.; DelPrete, T.; DeWolf, R.S.; DiLella, L.; Ducros, Y.; Egan, G.F.; Einsweiler, K.F.; Esposito, B.; Fayard, L.; Federspiel, A.; Ferrari, R.; Fraternali, M.; Froidevaux, D.; Fumagalli, G.; Gaillard, J.M.; Gianotti, F.; Gildemeister, O.; Goessling, C.; Goggi, V.G.; Gruenendahl, S.; Hara, K.; Hellman, S.; Hrivnac, J.; Hufnagel, H.; Hugentobler, E.; Hultqvist, K.; Iacopini, E.; Incandela, J.; Jakobs, K.; Jenni, P.; Kluge, E.E.; Kurz, N.; Lami, S.; Lariccia, P.; Lefebvre, M.; Linssen, L.; Livan, M.; Lubrano, P.; Magneville, C.; Mandelli, L.; Mapelli, L.; Mazzanti, M.; Meier, K.; Merkel, B.; Meyer, J.P.; Moniez, M.; Moning, R.; Morganti, M.; Mueller, L.; Munday, D.J.; Nessi, M.; Nessi-Tedaldi, F.; Onions, C.; Pal, T.; Parker, M.A.; Parrour, G.; Pastore, F.; Pennacchio, E.; Pentney, J.; Pepe, M.; Perini, L.; Petridou, C.; Petroff, P.; Plothow-Besch, H.; Polesello, G.; Poppleton, A.; Pretzl, K.; Primavera, M.; Punturo, M.; Repellin, J.P.; Rimoldi, A.; Sacchi, M.; Scampoli, P.; Schacher, J.; Schmidt, B.; Simak, V.; Singh, S.L.; Sondermann, V.; Spiwoks, R.; Stapnes, S.; Talamonti, C.; Tondini, F.; Tovey, S.N.; Tsesmelis, E.; Unal, G.; Valdata-Nappi, M.; Vercesi, V.; Weidberg, A.R.; Wells, P.S.; White, T.O.; Wood, D.R.; Wotton, S.A.; Zaccone, H.; Zylberstein, A.

    1992-01-01

    Results on the cross section for the production of electron pairs in anti pp collisions at √s=630 GeV are presented. The measured value is σ=405±51 (syst.)±84(syst.) pb, in the variant mass interval 10 s 2 ) QCD contributions. The comparison of these data with those of lower energy experiments show approximate scaling as a function of the variable √τ=m/√s. (orig.)

  9. Production of the Ne Auger electrons by Ne/sup +/ bombardment of Mg and Al surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ferrante, J; Pepper, S V [National Aeronautics and Space Administration, Cleveland, Ohio (USA). Lewis Research Center

    1976-07-01

    The authors have bombarded Mg and Al surfaces with Ne/sup +/ ions and in this letter present evidence for the production of an inner shell vacancy in the Ne by the asymmetric Ne-Mg and Ne-Al collision. In addition, autoionization states of neutral Ne have been observed. These states are to be distinguished from the more usual case in Auger electron spectroscopy of de-excitation of an ion with a core vacancy.

  10. Gamma and electron radiation effects on agricultural by-products with high fibre content

    International Nuclear Information System (INIS)

    Leonhardt, J.W.; Baer, M.; Nehring, K.

    1983-01-01

    Gamma and electron radiation effects on wheat straw, oat straw, barley straw, rye straw and dried green fodder are reported. In vitro and in vivo studies show that the digestibility of these agricultural by-products with high fibre content can be increased up to 80% and more at high doses. The increase of the digestibility is connected with a depolymerization of the cellulose and hemicellulose. (author)

  11. Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons

    International Nuclear Information System (INIS)

    Shehzadi, Ramoona

    2011-01-01

    The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q 2 >10 GeV 2 , using an integrated luminosity of 363 pb -1 . The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9 T e e 2 was extracted from the double-differential cross section as a function of Bjorken-x and Q 2 . (orig.)

  12. Sustainable packaging design for consumer electronics products: Balancing marketing, logistics and environmental requirements

    OpenAIRE

    Wever, R.; Boks, C.B.; Pratama, I.; Stevels, A.L.N.

    2007-01-01

    Packaging design for consumer electronic products is a challenge because contradictory demands from a distribution perspective and a marketing perspective have to be balanced. With several company departments involved and powerful external stakeholders this is a complicated matter. As the level of sophistication of data concerning a packagings marketing performance is limited, decisions are often strongly based on beliefs. This is reflected in inconsistencies in packaging that is currently in...

  13. Analysis about the development of mobile electronic commerce: An application of production possibility frontier model

    OpenAIRE

    Uesugi, Shiro; Okada, Hitoshi

    2012-01-01

    This study aims to further develop our previous research on production possibility frontier model (PPFM). An application of model to provide analysis on the mobile commerce survey for which data was collected in Japan und Thailand is presented. PPFM looks into the consumer behaviors as the results form the perception on the relationship between Convenience and Privacy Concerns of certain electronic commerce services. From the data of consumer surveys, PPFM is expected to provide practical sol...

  14. Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons

    International Nuclear Information System (INIS)

    Abramowicz, H.; Gueta, O.; Ingbir, R.; Kananov, S.; Levy, A.; Stern, A.

    2011-01-01

    The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q 2 >10 GeV 2 , using an integrated luminosity of 363 pb -1 . The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9 T e e vertical stroke 2 was extracted from the double-differential cross section as a function of Bjorken-x and Q 2 . (orig.)

  15. Electron-positron pair production by two identical photons in the nuclear field

    International Nuclear Information System (INIS)

    Smirnov, A.I.

    1977-01-01

    In the Born approximation of the perturbation theory considered is a nonlinear effect of the electron-positron pair production by two identical photons in the Coulomb field of an atomic nucleus. The kinematic version of identical photons is studied. All the particles are considered to be nonpolarized. The calculation of the differential probability of the effect has been carried out earlier by the Feynman method. The total probability of the effect in limiting energy ranges is determined by integrating the formulas of the pair component distribution over energies. The probabilities of the electron-positron pair production and fusion of two photons into one in the nucleus field have been compared for the case of identical quanta. From the comparison of the results of analyzing both the nonlinear effects it follows that in the high-energy range the electron-positron pair production by two identical photons in the nucleus field extremely predominates over the fusion of two photons into one photon in the same field

  16. Correlation analysis of electronic products with myopia in preschool and school aged children

    Directory of Open Access Journals (Sweden)

    Li-Li Sun

    2016-02-01

    Full Text Available AIM: To explore the influence of electronic products on myopia in preschool and school aged children, and the development regularities of myopia, to formulate reasonable guidelines for using eyes healthily, and lay a solid foundation for the prevention and control work. METHODS: This retrospective analysis enrolled 900 3~12 years old children from outpatients department, and all of them were established individualized archives, recording: uncorrected visual acuity, optometry, slit lamp, ophthalmoscopy, strabismus inspection results; recording eye usage condition on TVs, computers, mobile phones, iPad, homework, extra-curricular books. Statistical analyze the refractive status of each age group, the use of electronic products of different age groups and their correlation with refractive status. RESULTS: The number of preschool children with normal uncorrected visual acuity was more than that of early school-age children, and the difference was statistically significant(PP>0.05; the number of children aged 7~12(early school aged childrenwith myopia was more than that of children aged 3~6(preschool childrenand the difference was statistically significant(PCONCLUSION: For preschool children, it is necessary to conduct early screening, health guidance, the establishment of personalized medical records and one-to-one personalized guidance; it is also needed to avoid the arduous learning task with the stacking usage of eyes, to fight for myopia and to control the development of myopia. Therefore, to reduce the use of electronic products has become a topic worthy of further study.

  17. Production of hydrogen and deuterium negative ions in an electron cyclotron resonance driven plasma

    Energy Technology Data Exchange (ETDEWEB)

    Dougar-Jabon, V.D. [Industrial Univ. of Santander, Bucaramanga (Colombia)

    2001-04-01

    An electron cyclotron resonance source with driven plasma rings for hydrogen isotope ion production is studied. Extracted currents of positive and negative ions depending on gas pressure, microwave power value and extraction voltage are obtained. The study shows that the negative ion yield is an order of magnitude higher than the yield of positive particles when a driven ring is in contact with the surface of the plasma electrode. The production of negative ions of deuterium, D{sup -}, is close to the production of negative ions of light hydrogen isotope, H{sup -}. The comparison of the experimental data with the calculated ones shows that the most probable process of the H{sup -} and D{sup -} ion formation in the electron cyclotron driven plasma is dissociative attachment of electrons to molecules in high Rydberg states. For hydrogen ions and ions of deuterium, the negative current at a microwave power of 200 W through a 3-mm aperture and 8 kV extraction voltage are 4.7 mA and 3.1 mA respectively. (orig.)

  18. Production of hydrogen and deuterium negative ions in an electron cyclotron resonance driven plasma

    International Nuclear Information System (INIS)

    Dougar-Jabon, V.D.

    2001-01-01

    An electron cyclotron resonance source with driven plasma rings for hydrogen isotope ion production is studied. Extracted currents of positive and negative ions depending on gas pressure, microwave power value and extraction voltage are obtained. The study shows that the negative ion yield is an order of magnitude higher than the yield of positive particles when a driven ring is in contact with the surface of the plasma electrode. The production of negative ions of deuterium, D - , is close to the production of negative ions of light hydrogen isotope, H - . The comparison of the experimental data with the calculated ones shows that the most probable process of the H - and D - ion formation in the electron cyclotron driven plasma is dissociative attachment of electrons to molecules in high Rydberg states. For hydrogen ions and ions of deuterium, the negative current at a microwave power of 200 W through a 3-mm aperture and 8 kV extraction voltage are 4.7 mA and 3.1 mA respectively. (orig.)

  19. A comparison of purebred Holstein-Friesian and Holstein-Friesian × beef breed bulls for beef production and carcass traits

    Directory of Open Access Journals (Sweden)

    Arto Kalevi Huuskonen

    2013-06-01

    Full Text Available The objective of this study was to determine beef production traits of purebred Holstein-Friesian (Hol and Hol×beef breed crossbred bulls. The data collected from slaughterhouses included observations of 87323 purebred Hol, 783 Hol×Aberdeen angus (Hol×Ab, 621 Hol×Blonde d’Aquitaine (Hol×Ba, 562 Hol×Charolais (Hol×Ch, 349 Hol×Hereford (Hol×Hf, 1691 Hol×Limousin (Hol×Li and 570 Hol×Simmental (Hol×Si bulls. For estimating valuable cuttings also a separate dataset was collected and included observations of 8806 purebred Hol, 57 Hol×Ab, 29 Hol×Ba, 22 Hol×Ch, 15 Hol×Hf, 111 Hol×Li and 58 Hol×Si bulls. Crossbreeding Hol cows with late maturing breeds (Ba, Ch, Li, Si had favorable effects on carcass gain, conformation and proportion of high value joints of the progeny when compared to purebred Hol bulls. No advantages in proportion of valuable cuttings seemed to be obtained by crossbreeding with Ab or Hf breeds, while the improvements in gain and conformation were intermediate compared to the late maturing crossbreds.

  20. Neutrons production during the interaction of monoenergetic electrons with a thin tungsten target

    International Nuclear Information System (INIS)

    Soto B, T. G.; Medina C, D.; Baltazar R, A.; Vega C, H. R.

    2016-10-01

    When a linear accelerator for radiotherapy operates with acceleration voltages higher than 8 MV, neutrons are produced, as secondary radiation which deposits an undesirable and undesirable dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, the cancer treatment with a Linac is performed with photon or electron beams, which produce neutrons through reactions (γ, n) and (e, e n) respectively. Because the effective section for the neutrons production by reactions (γ, n) is approximately two orders of magnitude larger than the effective section of the reactions (e, e n), studies on the effects of this secondary radiation have focused on photo neutrons. en a Linac operates with electron beams, the beam coming out of the magnetic deflector is impinged on the dispersion lamella in order to cause quasi-elastic interactions and to expand the spatial distribution of the electrons; the objective of this work is to determine the characteristics of the photons and neutrons that occur when a mono-energetic electron beam of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm of thickness. The study was done using Monte Carlo methods with code MCNP6 for electron beams of 8, 10, 12, 15 and 18 MeV. The spectra of photons and neutrons were estimated in 4 point detectors placed at different equidistant points from the center of the lamella. (Author)

  1. Charmed and strange baryon production in 29-GeV electron positron collisions

    International Nuclear Information System (INIS)

    Klein, S.R.

    1988-01-01

    Baryon production is one of the least understood areas of hadron production in electron positron collisions. Early models of hadronization predicted that very few baryons should be produced. However, experiments have shown a very substantial rate of baryon production, and many different models have been proposed to explain this. One way to test these models, and to further probe the hadronization process is to measure the production rates of different types of baryons. This dissertation presents measurements of the production rates of baryons with different strangeness and spin. The analyses presented here use data taken with the Mark II detector at the PEP storage ring, operating at a center of mass energy of 29 GeV. The Ξ - production rate is measured to be 0.017 ± 0.004 ± 0.004 per hadronic event, Ω - production is measured to be 0.014 ± 0.006 ± 0.004 per hadronic event, and Ξ *0 production is less than 0.006 per hadronic event at a 90% confidence level. These measurements place strong constraints on models of baryon production. In particular, the unexpectedly high rate of Ω - production is difficult to explain in any disquark based model. Semileptonic Λ c + decays have also been observed, with σ(e + e - → Λ c X) * Br(Λ c → eΛX) = 0.0031 ± 0.0012 ± 0.0010 per hadronic event, and σ(e + e - → Λ c X) * Br(Λ c → μΛX) = 0.0024 ± 0.0024 ± 0.0007 per hadronic event. Because neither the branching ratios nor the production rate are well known, it is difficult to interpret these results

  2. Calving traits, milk production, body condition, fertility, and survival of Holstein-Friesian and Norwegian Red dairy cattle on commercial dairy farms over 5 lactations.

    Science.gov (United States)

    Ferris, C P; Patterson, D C; Gordon, F J; Watson, S; Kilpatrick, D J

    2014-01-01

    The objective of this study was to compare calving traits, BCS, milk production, fertility, and survival of Holstein-Friesian (HF) and Norwegian Red (NR) dairy cattle in moderate-concentrate input systems. The experiment was conducted on 19 commercial Northern Ireland dairy farms, and involved 221 HF cows and 221 NR cows. Cows completed 5 lactations during the experiment, unless they died or were culled or sold. Norwegian Red cows had a lower calving difficulty score than HF cows when calving for the first and second time, but not for the third and fourth time. At first calving, the incidence of stillbirths for NR cows was 4%, compared with 13% for HF cows, whereas no difference existed between breeds in the proportion of calves born alive when calving for the second time. When calving for the first time, NR cows had a poorer milking temperament than HF cows, whereas milking temperament was unaffected by breed following the second calving. Holstein-Friesian cows had a higher full-lactation milk yield than NR cows, whereas NR cows produced milk with a higher milk fat and protein content. Full-lactation fat + protein yield was unaffected by genotype. Norwegian Red cows had a lower somatic cell score than HF cows during all lactations. Although NR cattle had a higher BCS than the HF cows during lactations 1 and 2, no evidence existed that the 2 genotypes either lost or gained body condition at different rates. Conception rates to first artificial insemination were higher with the NR cows during lactations 1 to 4 (57.8 vs. 40.9%, respectively), with 28.5% of HF cows and 11.8% of NR cows culled as infertile before lactation 6. A greater percentage of NR cows calved for a sixth time compared with HF cows (27.2 vs. 16.3%, respectively). In general, NR cows outperformed HF cows in traits that have been historically included in the NR breeding program. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  3. Selection for beef traits and calving performance in Piemontese cattle

    NARCIS (Netherlands)

    Albera, A.

    2006-01-01

    Beef cattle selection programmes are usually focused on the improvement of production traits. However, also functional traits play an important role for the efficiency of animal production. Among these traits calving performance, affecting stillbirth of calves, fertility of cows, animal welfare and

  4. Prospects for utilization of Electron Beam Accelerators (EBAs) for processing of food products

    International Nuclear Information System (INIS)

    Sarma, K.S.

    2014-01-01

    Radiation processing using gamma radiation and high energy electron beams has been in practice for more than three decades in the industry. Since gamma radiation has the ability of higher penetration in the material, large scale irradiators (mainly based on mega curies of 60 Co radioactive source) are successfully employed for treating bulk products in sterilization and food preservation applications. Electron beam, due to its low penetration, has been exploited exclusively for applications involving polymer modifications to irradiate thin finished end products like electrical cable insulations, heat shrinkable sheets, tubes, automobile tyres etc using high power EBAs (energies 0.5 MeV-4 MeV and powers around ∼100 kW). Out of around 2500 industrial EB units currently employed worldwide (with total installed power above 150 MWL 90% are in the low to medium energy range (0.5 MeV to 4 MeV) being used for polymer modifications. However, recent technological advances in the manufacturing sector of industrial high energy EBAs and product handling systems resulted in widening utilization of EB technology for applications involving bulk product irradiation

  5. A New View at the Planning Marketing Popular Products: Exploratory Study Electronics Sector with Companies in Brazil.

    OpenAIRE

    Evange Elias Assis; Francisco Antonio Serralvo; Karen Perrotta Lopes de Almeida Prado

    2015-01-01

    The increased consumption of appliance and electronic products by lower-income population represented a growth opportunity for companies in the sector. The overall objective of this paper is to investigate how appliance and electronic product manufacturers draw up their marketing planning for low-end products. An exploratory approach was taken in this study, comprising the literature review and the empirical research which was conducted in two stages by combining the qualitative and quantitat...

  6. Plants with useful traits and related methods

    Science.gov (United States)

    Mackenzie, Sally Ann; De la Rosa Santamaria, Roberto

    2016-10-25

    The present invention provides methods for obtaining plants that exhibit useful traits by transient suppression of the MSH1 gene of the plants. Methods for identifying genetic loci that provide for useful traits in plants and plants produced with those loci are also provided. In addition, plants that exhibit the useful traits, parts of the plants including seeds, and products of the plants are provided as well as methods of using the plants.

  7. Electronics Come of Age: A Taxonomy for Miscellaneous and LowPower Products

    Energy Technology Data Exchange (ETDEWEB)

    Nordman, Bruce; Sanchez, Marla C.

    2006-08-01

    Most energy end uses such as space conditioning or waterheating are apparently well-defined in what is included, and haveterminology that derives from the professionals who work in the relevantfield. The topic of miscellaneous consumption lacks such clarity forhistorical and practical reasons. As this end use grows in size andinterest for the energy community, the confusion and ambiguity around thetopic is an increasing barrier to progress. This paper providesdefinitions for key terms and concepts with the intent that that futurework can be more correctly and consistently reported and interpreted. Inaddition, it provides a taxonomy of product types and categories, whichcovers both residential and commercial miscellaneous consumption. A keyelement is identification of "electronics" as a distinct energy end use.Finally, products are identified as to whether they commonly have alow-power mode, and product types that have such modes within thetraditional end uses are also listed.

  8. Forward electron production in heavy ion-atom and ion-solid collisions

    International Nuclear Information System (INIS)

    Sellin, I.A.

    1984-01-01

    A sharp cusp in the velocity spectrum of electrons, ejected in ion-atom and ion-solid collisions, is observed when the ejected electron velocity vector v/sub e/ matches that of the emergent ion vector v/sub p/ in both speed and direction. In ion-atom collisions, the electrons originate from capture to low-lying, projectile-centered continuum states (ECC) for fast bare or nearly bare projectiles, and from loss to those low-lying continuum states (ELC) when loosely bound projectile electrons are available. Most investigators now agree that ECC cusps are strongly skewed toward lower velocities, and exhibit full widths half maxima roughly proportional to v/sub p/ (neglecting target-shell effects, which are sometimes strong). A close examination of recent ELC data shows that ELC cusps are instead nearly symmetric, with widths nearly independent on v/sub p/ in the velocity range 6 to 18 a.u., a result only recently predicted by theory. Convoy electron cusps produced in heavy ion-solid collisions at MeV/u energies exhibit approximately velocity-independent widths very similar to ELC cusp widths. While the shape of the convoy peaks is approximately independent of projectile Z, velocity, and of target material, it is found that the yields in polycrystalline targets exhibit a strong dependence on projectile Z and velocity. While attempts have been made to link convoy electron production to binary ECC or ELC processes, sometimes at the last layer, or alternatively to a solid-state wake-riding model, our measured dependences of cusp shape and yield on projectile charge state and energy are inconsistent with the predictions of available theories. 10 references, 8 figures, 1 table

  9. Electron beam processing technology for modification of different types of cellulose pulps for production of derivatives

    International Nuclear Information System (INIS)

    Iller, E.; Kukielka, A.; Mikolajczyk, W.; Starostka, P.; Stupinska, H.

    2002-01-01

    Institute of Nuclear Chemistry and Technology, Pulp and Paper Research Institute and Institute of Chemical Fibers carry out a joint research project in order to develop the radiation methods modification of cellulose pulps for production of cellulose derivatives such as carbamate (CC), carboxymethyl cellulose (CMC) and methylcellulose (MC). Three different types of textile pulps: Alicell (A); Borregaard (B), Ketchikan (K) and Kraft softwood (PSS) and hardwood (PSB) pulps have been irradiated with 10 MeV electron beam from LAE 13/9 linear accelerator with doses of 5, 10, 15, 20, 25 and 50 kGy. After electron beam treatment the samples of cellulose pulps have been examined by using of structural and physico-chemical methods. Electron paramagnetic resonance spectroscopy (EPR), gel permeation chromatography (GPC) and infrared spectroscopy (IRS) were applied for determination of structural changes in irradiated cellulose pulps. By means of analytical methods, such parameters as: viscosity, average degree of polymerization (DP) and α-cellulose contents were evaluated. Based on EPR and GPC investigations the relationship between concentrations of free radicals and decreasing polymerization degrees in electron beam treatment pulps has been confirmed. The carboxymethylcellulose, methylcellulose and cellulose carbamate were prepared using the raw material of radiation modified pulps. Positive results of investigations will allow for determination of optimum conditions for electron beam modification of selected cellulose paper and textile pulps. Such procedure leads to limit the amounts of chemical activators used in methods for preparation cellulose derivatives. The proposed electron beam technology is new approaches in technical solution and economic of process of cellulose derivatives preparation. (author)

  10. Genetic analyses for conformation traits in South African Jersey and ...

    African Journals Online (AJOL)

    JACO

    Genetic trends for conformation traits of the South African Holstein show that ... conformation traits can be used to improve stayability, fertility and disease resistance (Rogers et al., 1999; .... Genetic correlations among protein yield, productive.

  11. Three Nightmare Traits in Leaders

    Directory of Open Access Journals (Sweden)

    Reinout E. de Vries

    2018-06-01

    Full Text Available This review offers an integration of dark leadership styles with dark personality traits. The core of dark leadership consists of Three Nightmare Traits (TNT—leader dishonesty, leader disagreeableness, and leader carelessness—that are conceptualized as contextualized personality traits aligned with respectively (low honesty-humility, (low agreeableness, and (low conscientiousness. It is argued that the TNT, when combined with high extraversion and low emotionality, can have serious (“explosive” negative consequences for employees and their organizations. A Situation-Trait-Outcome Activation (STOA model is presented in which a description is offered of situations that are attractive to TNT leaders (situation activation, situations that activate TNT traits (trait activation, and the kinds of outcomes that may result from TNT behaviors (outcome activation. Subsequently, the TNT and STOA models are combined to offer a description of the organizational actions that may strengthen or weaken the TNT during six career stages: attraction, selection, socialization, production, promotion, and attrition. Except for mainly negative consequences of the TNT, possible positive consequences of TNT leadership are also explored, and an outline of a research program is offered that may provide answers to the most pressing questions in dark leadership research.

  12. Exploring the genetic architecture and improving genomic prediction accuracy for mastitis and milk production traits in dairy cattle by mapping variants to hepatic transcriptomic regions responsive to intra-mammary infection.

    Science.gov (United States)

    Fang, Lingzhao; Sahana, Goutam; Ma, Peipei; Su, Guosheng; Yu, Ying; Zhang, Shengli; Lund, Mogens Sandø; Sørensen, Peter

    2017-05-12

    A better understanding of the genetic architecture of complex traits can contribute to improve genomic prediction. We hypothesized that genomic variants associated with mastitis and milk production traits in dairy cattle are enriched in hepatic transcriptomic regions that are responsive to intra-mammary infection (IMI). Genomic markers [e.g. single nucleotide polymorphisms (SNPs)] from those regions, if included, may improve the predictive ability of a genomic model. We applied a genomic feature best linear unbiased prediction model (GFBLUP) to implement the above strategy by considering the hepatic transcriptomic regions responsive to IMI as genomic features. GFBLUP, an extension of GBLUP, includes a separate genomic effect of SNPs within a genomic feature, and allows differential weighting of the individual marker relationships in the prediction equation. Since GFBLUP is computationally intensive, we investigated whether a SNP set test could be a computationally fast way to preselect predictive genomic features. The SNP set test assesses the association between a genomic feature and a trait based on single-SNP genome-wide association studies. We applied these two approaches to mastitis and milk production traits (milk, fat and protein yield) in Holstein (HOL, n = 5056) and Jersey (JER, n = 1231) cattle. We observed that a majority of genomic features were enriched in genomic variants that were associated with mastitis and milk production traits. Compared to GBLUP, the accuracy of genomic prediction with GFBLUP was marginally improved (3.2 to 3.9%) in within-breed prediction. The highest increase (164.4%) in prediction accuracy was observed in across-breed prediction. The significance of genomic features based on the SNP set test were correlated with changes in prediction accuracy of GFBLUP (P layers of biological knowledge to provide novel insights into the biological basis of complex traits, and to improve the accuracy of genomic prediction. The SNP set

  13. Electron Microscopic Analysis of Surface Inorganic Substances on Oral and Combustible Tobacco Products.

    Science.gov (United States)

    Halstead, Mary M; Watson, Clifford H; Pappas, R Steven

    2015-01-01

    Although quantitative trace toxic metal analyses have been performed on tobacco products, little has been published on inorganic particulate constituents on and inside the products. We analyzed these constituents using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). The nature of SEM-EDS instrumentation makes it an ideal choice for inorganic particulate analyses and yields relevant information to potential exposures during consumption of oral tobacco products, and possibly as a consequence of smoking. Aluminum silicates, silica and calcium compounds were common inorganic particulate constituents of tobacco products. Aluminum silicates and silica from soil were found on external leaf surfaces. Phytolithic silica, found in the lumen of the plant leaf, is of biogenic origin. Calcium oxalate was also apparently of biogenic origin. Small mineral deposits on tobacco could have health implications. Minerals found on the surfaces of smokeless tobacco products could possibly abrade the oral mucosa and contribute to the oral inflammatory responses observed with smokeless tobacco product use. If micron and sub-micron size calcium particles on cigarette filler were transported in mainstream smoke, they could potentially induce a pulmonary irritant inflammation when inhaled. The transport of aluminum silicate and silica in smoke could potentially also contribute to chronic inflammatory disease. Published by Oxford University Press 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  14. An empirical determination of the production efficiency for auroral 6300 AA emmission by energetic electrons

    International Nuclear Information System (INIS)

    Winningham, J.D.; Bunn, F.E.; Thirkettle, F.W.; Shepherd, G.G.

    1979-06-01

    Auroral data from the Soft Particle Spectrometer and the Red Line Photometer on the ISIS-2 spacecraft have been selected to form an electron energy flux and optical auroral emission data base. The energy fluxes are stored as integrated fluxes over four energy bands, and the corresponding stored optical emission rates are corrected for airglow and for albedo. Because of the variety of electron energy spectra represented in the data base it was possible to perform a regression analysis that yielded the production efficiency for the production of emission for each of the four bands. While the results of this analysis are interesting to compare with theoretical predictions of 6300 AA excitation processes, these statistical results are not as precise as the comparisons of individual experiments where all parameters, such as the atmospheric composition and temperature profiles are measured. The significance of this approach is that it permits a multiparameter description of an electron energy spectrum, and its relationship to a specific optical emission, by purely empirical means. This is particularly useful in the interpretation of ISIS-2 data from the instruments which provided the results, but should find further application in optical-particle auroral studies. (author)

  15. Purification of coal fired boiler flue gas and fertilizer production by using electron beam

    International Nuclear Information System (INIS)

    Maezawa, Akihiko

    1996-01-01

    Electron beam irradiation technology which is applied in electron accelerators is used in a variety of fields, including industry, medicine and etc.. In collaboration with the Japan Atomic Energy Research Institute, Ebara Corporation has developed a novel flue-gas treatment process by making use of the electron beam for the purification of flue gas emitted from industrial plant such as thermal power station. The E-beam flue gas treatment process (EBA Process) is applied to clean flue gas generated in the combustion of coal containing sulfur oxides (SOx) and nitrogen oxides (NOx), which are chemical pollutants responsible for acid rain. As a by-product of this process, ammonium sulfate and ammonium nitrate mixture is obtained. This mixture can be recovered from the process as a valuable fertilizer to promote the growth of agricultural produce. The EBA process thus serves two important purposes at the same time: It helps prevent environmental pollution and produces a fertilizer that is vitally important for increasing food production to meet the world's future population growth. (J.P.N.)

  16. Invited review: overview of new traits and phenotyping strategies in dairy cattle with a focus on functional traits.

    Science.gov (United States)

    Egger-Danner, C; Cole, J B; Pryce, J E; Gengler, N; Heringstad, B; Bradley, A; Stock, K F

    2015-02-01

    For several decades, breeding goals in dairy cattle focussed on increased milk production. However, many functional traits have negative genetic correlations with milk yield, and reductions in genetic merit for health and fitness have been observed. Herd management has been challenged to compensate for these effects and to balance fertility, udder health and metabolic diseases against increased production to maximize profit without compromising welfare. Functional traits, such as direct information on cow health, have also become more important because of growing concern about animal well-being and consumer demands for healthy and natural products. There are major concerns about the impact of drugs used in veterinary medicine on the spread of antibiotic-resistant strains of bacteria that can negatively impact human health. Sustainability and efficiency are also increasingly important because of the growing competition for high-quality, plant-based sources of energy and protein. Disruptions to global environments because of climate change may encourage yet more emphasis on these traits. To be successful, it is vital that there be a balance between the effort required for data recording and subsequent benefits. The motivation of farmers and other stakeholders involved in documentation and recording is essential to ensure good data quality. To keep labour costs reasonable, existing data sources should be used as much as possible. Examples include the use of milk composition data to provide additional information about the metabolic status or energy balance of the animals. Recent advances in the use of mid-infrared spectroscopy to measure milk have shown considerable promise, and may provide cost-effective alternative phenotypes for difficult or expensive-to-measure traits, such as feed efficiency. There are other valuable data sources in countries that have compulsory documentation of veterinary treatments and drug use. Additional sources of data outside of the farm

  17. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy.

    Science.gov (United States)

    Bahreyni Toossi, Mohammad Taghi; Ghorbani, Mahdi; Akbari, Fatemeh; Mehrpouyan, Mohammad; Sobhkhiz Sabet, Leila

    2016-03-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm(2) applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam's energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  18. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy

    International Nuclear Information System (INIS)

    Bahreyni Toossi, M.T.; Ghorbani, Mahdi; Akbari, Fatemah; Sabet, Leila S.; Mehrpouyan, Mohammad

    2016-01-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm 2 applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam’s energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  19. Production of charm and beauty in e+e- with polarized electron beam

    International Nuclear Information System (INIS)

    Su, D.

    1995-09-01

    The test of the Standard Model through the measurements of Z 0 to fermion couplings can benefit from much enhanced sensitivity by using longitudinally polarized electron beams. This report reviews preliminary electroweak measurements from SLD on heavy quark production at the Z 0 , using 150,000 hadronic Z 0 decays accumulated during the 93-95 runs with high electron beam polarization. The parity violating parameters A b and A c of the Zbb and Zcc couplings are measured directly from the left-right forward-backward asymmetries. A measurement of R b with a lifetime double tag and a summary of the preliminary measurement of A LR from the 93-95 SLD data are also included in this report

  20. A high-compression electron gun for C6+ production: concept, simulations and mechanical design

    Science.gov (United States)

    Mertzig, Robert; Breitenfeldt, M.; Mathot, S.; Pitters, J.; Shornikov, A.; Wenander, F.

    2017-07-01

    In this paper we report on simulations and the mechanical design of a high-compression electron gun for an Electron Beam Ion Source (EBIS) dedicated for production of high intensity and high repetition rate pulses of bare carbon ions for injection into linac-based hadron therapy facilities. The gun is presently under construction at CERN to be retrofitted into the TwinEBIS test bench for experimental studies. We describe the design constraints, show results of numeric simulations and report on the mechanical design featuring several novel ideas. The reported design makes use of combined-function units with reduced number of mechanical joints that were carefully controlled and tuned during the manufacturing phase. The simulations addressed a wide range of topics including the influence of thermal effects, focusing optics, symmetry-breaking misalignments and injection into a full 5 T field.

  1. Initial Assessment of Electron and X-Ray Production and Charge Exchange in the NDCX-II Accelerator

    International Nuclear Information System (INIS)

    Cohen, R.H.

    2010-01-01

    The purpose of this note is to provide initial assessments of some atomic physics effects for the accelerator section of NDCX-II. There are several effects we address: the production of electrons associated with loss of beam ions to the walls, the production of electrons associated with ionization of background gas, the possibly resultant production of X-rays when these electrons hit bounding surfaces, and charge exchange of beam ions on background gas. The results presented here are based on a number of caveats that will be stated below, which we will attempt to remove in the near future.

  2. Perceived quality, perceived risk and customer trust affecting customer loyalty of environmentally friendly electronics products

    Directory of Open Access Journals (Sweden)

    Lalinthorn Marakanon

    2017-01-01

    Full Text Available At present, industrial business competition causes producers to be aware of quality, price, and variety in developing new products to meet the consumers' needs. This research reviewed the literature on green marketing and proposes a new conceptual framework of customer loyalty. It uses four constructs—perceived quality, perceived risk, customer trust, and customer loyalty—in the context of environmentally friendly electronics products in Thailand. This research employed an empirical study using the questionnaire survey method to verify the hypotheses. Data were obtained from 420 consumers who bought and used environmentally friendly electronic products, particularly mobile phones, computers, and laptops using a purposive sampling method. The data were analyzed using confirmatory factor analysis (CFA and structural equation modeling (SEM. The results showed that perceived risk and customer trust had a direct effect on customer loyalty while perceived quality had an indirect effect on customer loyalty via customer trust. Furthermore, perceived quality had direct effects on perceived risk and customer trust. The results from the final SEM model were used to confirm the proposed relationships among the variables.

  3. Valorisation of typical products through characterising and promoting actions: morpho-biometric traits, sensory analysis and flavonol content in Cipolla di Giarratana

    Directory of Open Access Journals (Sweden)

    Ezio Riggi

    2013-05-01

    Full Text Available The performances of 9 accessions of Cipolla di Giarratana landrace were evaluated at 5 different sites located 2 in the area where this landrace is traditionally grown (South-Eastern Sicily, 550 m asl, 2 in the neighbor areas with similar average altitude, and one on the South East coast of Sicily (sea level. Biometric and morphological traits, flavonol content and sensory profile were all considered in the valorisation of a typical product of a marginal area of Sicily. Data on the actual yield and crop management at farm scale were also obtained involving more than half of the growers actually cultivating Cipolla di Giarratana, and measuring yield, plant density, and bulb weight directly on the farms. The Cipolla di Giarratana landrace is characterised by a large and heavy bulb (535 g, strongly flattened at the poles, with the maximum diameter at the central section, and white in colour. Significant differences in bulb weight and diameter were found among accessions and locations, but there were no interactions between them and one accession reported the highest bulb weight value in all of the locations studied. With regards to bulb weight, farm scale data confirm the results we obtained at the experimental locations. Fifty percent of registered yield at farm scale ranged between 86 and 152 t ha–1 with a median of 119 t ha–1, and measured plant density revealed that 50% of the farmers planted 20-27 plants per square meter. Analysis of the UV-vis and mass spectra showed the presence of 10 different flavonols with Quercetin as the most represented flavonol. The sensory profile of Cipolla di Giarratana onion showed that this landrace is characterised by a high intensity of sweet, typical fresh flavour and texture perception.

  4. Global sale of tobacco products and electronic nicotine delivery systems in community pharmacies.

    Science.gov (United States)

    Hudmon, Karen Suchanek; Elkhadragy, Nervana; Kusynová, Zuzana; Besançon, Luc; Brock, Tina Penick; Corelli, Robin L

    2017-12-01

    To estimate the proportion of countries/territories that allow sales of tobacco products and electronic nicotine delivery systems (ENDS) in community pharmacies. International Pharmaceutical Federation (FIP) member organisations were contacted by email and asked to respond to a two-item survey assessing whether their country/territory allowed sales of (a) tobacco products and (b) ENDS in community pharmacies. Of 95 countries/territories contacted, responses were received from 60 (63.2%). Seven countries (11.7%) reported that tobacco products were sold in community pharmacies, and 11 countries (18.3%) reported that ENDS were sold in community pharmacies. Among the FIP member organisations, there are few countries that allow the sale of tobacco products and ENDS in community pharmacies, with ENDS being more likely than tobacco products to be sold. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  5. Regulated production of free radicals by the mitochondrial electron transport chain: Cardiac ischemic preconditioning.

    Science.gov (United States)

    Matsuzaki, Satoshi; Szweda, Pamela A; Szweda, Luke I; Humphries, Kenneth M

    2009-11-30

    Excessive production of free radicals by mitochondria is associated with, and likely contributes to, the progression of numerous pathological conditions. Nevertheless, the production of free radicals by the mitochondria may have important biological functions under normal or stressed conditions by activating or modulating redox-sensitive cellular signaling pathways. This raises the intriguing possibility that regulated mitochondrial free radical production occurs via mechanisms that are distinct from pathologies associated with oxidative damage. Indeed, the capacity of mitochondria to produce free radicals in a limited manner may play a role in ischemic preconditioning, the phenomenon whereby short bouts of ischemia protect from subsequent prolonged ischemia and reperfusion. Ischemic preconditioning can thus serve as an important model system for defining regulatory mechanisms that allow for transient, signal-inducing, production of free radicals by mitochondria. Defining how these mechanism(s) occur will provide insight into therapeutic approaches that minimize oxidative damage without altering normal cellular redox biology. The aim of this review is to present and discuss evidence for the regulated production of superoxide by the electron transport chain within the ischemic preconditioning paradigm of redox regulation.

  6. Inclusive prompt photon production in electron-nucleus scattering at small x

    Science.gov (United States)

    Roy, Kaushik; Venugopalan, Raju

    2018-05-01

    We compute the differential cross-section for inclusive prompt photon production in deeply inelastic scattering (DIS) of electrons on nuclei at small x in the framework of the Color Glass Condensate (CGC) effective theory. The leading order (LO) computation in this framework resums leading logarithms in x as well as power corrections to all orders in Q s, A 2 / Q 2, where Q s, A ( x) is the nuclear saturation scale. This LO result is proportional to universal dipole and quadrupole Wilson line correlators in the nucleus. In the soft photon limit, the Low-Burnett-Kroll theorem allows us to recover existing results on inclusive DIS dijet production. The k ⊥ and collinearly factorized expressions for prompt photon production in DIS are also recovered in a leading twist approximation to our result. In the latter case, our result corresponds to the dominant next-to-leading order (NLO) perturbative QCD contribution at small x. We next discuss the computation of the NLO corrections to inclusive prompt photon production in the CGC framework. In particular, we emphasize the advantages for higher order computations in inclusive photon production, and for fully inclusive DIS, arising from the simple momentum space structure of the dressed quark and gluon "shock wave" propagators in the "wrong" light cone gauge A - = 0 for a nucleus moving with P N + → ∞.

  7. Single nucleotide polymorphisms in the growth hormone and insulin-like growth factor-1 genes are associated with milk production, body condition score and fertility traits in dairy cows.

    Science.gov (United States)

    Mullen, M P; Lynch, C O; Waters, S M; Howard, D J; O'Boyle, P; Kenny, D A; Buckley, F; Horan, B; Diskin, M G

    2011-08-26

    The somatotrophic axis (GH-IGF) is a key regulator of animal growth and development, affecting performance traits that include milk production, growth rate, body composition, and fertility. The aim of this study was to quantify the association of previously identified SNPs in bovine growth hormone (GH1) and insulin-like growth factor 1 (IGF-1) genes with direct performance trait measurements of lactation and fertility in Holstein-Friesian lactating dairy cows. Sixteen SNPs in both IGF-1 and GH1 were genotyped across 610 cows and association analyses were carried out with traits of economic importance including calving interval, pregnancy rate to first service and 305-day milk production, using animal linear mixed models accounting for additive genetic effects. Two IGF-1 SNPs, IGF1i1 and IGF1i2, were significantly associated with body condition score at calving, while a single IGF-1 SNP, IGF1i3, was significantly associated with milk production, including milk yield (means ± SEM; 751.3 ± 262.0 kg), fat yield (21.3 ± 10.2 kg) and protein yield (16.5 ± 8.0 kg) per lactation. Only one GH1 SNP, GH33, was significantly associated with milk protein yield in the second lactation (allele substitution effect of 9.8 ± 5.0 kg). Several GH1 SNPs were significantly associated with fertility, including GH32, GH35 and GH38 with calving to third parity (22.4 ± 11.3 days) (GH32 and GH38 only), pregnancy rate to first service (0.1%) and overall pregnancy rate (0.05%). The results of this study demonstrate the effects of variants of the somatotrophic axis on milk production and fertility traits in commercial dairy cattle.

  8. Hydrogen production by Chlamydomonas reinhardtii: an elaborate interplay of electron sources and sinks

    International Nuclear Information System (INIS)

    Hemschemeier, A; Happe, T.; Fouchard, S; Cournac, L; Peltier, G.

    2008-01-01

    The unicellular green alga Chlamydomonas reinhardtii possesses a [FeFe]-hydrogenase HydA1 (EC 1.12.7.2), which is coupled to the photosynthetic electron transport chain. Large amounts of H 2 are produced in a light-dependent reaction for several days when C. reinhardtii cells are deprived of sulfur. Under these conditions, the cells drastically change their physiology from aerobic photosynthetic growth to an anaerobic resting state. The understanding of the underlying physiological processes is not only important for getting further insights into the adaptability of photosynthesis, but will help to optimize the biotechnological application of algae as H 2 producers. Two of the still most disputed questions regarding H 2 generation by C. reinhardtii concern the electron source for H 2 evolution and the competition of the hydrogenase with alternative electron sinks. We analyzed the H 2 metabolism of S-depleted C. reinhardtii cultures utilizing a special mass spectrometer setup and investigated the influence of photosystem II (PSII)- or ribulose-bisphosphate-carboxylase/oxygenase (Rubisco)-deficiency. We show that electrons for H 2 -production are provided both by PSII activity and by a non-photochemical plastoquinone reduction pathway, which is dependent on previous PSII activity. In a Rubisco-deficient strain, which produces H 2 also in the presence of sulfur, H 2 generation seems to be the only significant electron sink for PSII activity and rescues this strain at least partially from a light-sensitive phenotype.The latter indicates that the down-regulation of assimilatory pathways in S-deprived C. reinhardtii cells is one of the important prerequisites for a sustained H 2 evolution. (authors)

  9. Polarization effects in the reaction of charm baryon production on colliding electron-positron beams

    International Nuclear Information System (INIS)

    Rekalo, M.P.; Korzh, A.P.; Barannik, V.P.

    1980-01-01

    To calculate energy and angular distributions of various decay products of charm baAyons, which are prodUced in reactions on colliding e + e - beams, it is necessary to know the differential cross sections of the e + e - → C+anti C process which correspond to different polarized states of produced C and anti C (C - charm baryon). These differential cross sections are calculated for a single-photon mechanism with respect to the contribution of the anapole and electric dipole form factors of C-baryon. Polarizations of colliding electron-positron beams are taken into account in a full volume

  10. Exclusive ρ0 production in deep inelastic electron-proton scattering at HERA

    International Nuclear Information System (INIS)

    Derrick, M.; Krakauer, D.; Magill, S.

    1995-07-01

    The exclusive production of ρ 0 mesons in deep inelastic electron-proton scattering has been studied using the ZEUS detector. Cross sections have been measured in the range 7 2 2 for γ*p centre of mass (c.m.) energies from 40 to 130 GeV. The γ*p→ρ 0 p cross section exhibits a Q -(4.2±0.8 -0.5 +1.4 ) dependence and both longitudinally and transversely polarised ρ 0 's are observed. The γ*p→ρ 0 p0 cross section rises strongly with increasing c.m. energy, when compared with NMC data at lower energy, which cannot be explained by production through soft pomeron exchange. The data are compared with perturbative QCD calculations where the rise in the cross section reflects the increase in the gluon density at low x. (orig.)

  11. Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons

    Energy Technology Data Exchange (ETDEWEB)

    Shehzadi, Ramoona

    2011-01-15

    The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q{sup 2}>10 GeV{sup 2}, using an integrated luminosity of 363 pb{sup -1}. The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9production were measured and compared with next-to-leading-order QCD calculations. The beauty contribution to the proton structure function F{sub 2} was extracted from the double-differential cross section as a function of Bjorken-x and Q{sup 2}. (orig.)

  12. Disinfection by-products/precursor control using an innovative treatment process -- high energy electron beam irradiation

    International Nuclear Information System (INIS)

    Sawal, K.; Millington, B.; Slifker, R.A.; Cooper, W.J.; Nickelsen, M.G.; Kurucz, C.N.; Waite, T.D.

    1993-01-01

    When waters containing naturally occurring humic substances, precursors, are chlorinated, reaction (disinfection) by-products (DBPs) that may compromise the chemical water quality of the drinking water are formed. Two options exist for the treatment of THMs and other DBPs, removal of precursor material prior to chlorination, or destruction of the by-products once they are formed. The authors have initiated a study using an innovative process, high energy electron beam irradiation, as an alternative treatment for the destruction of toxic organic compounds. Preliminary studies indicated that the process would also be effective in the removal of precursors. An added advantage of this process is that is would serve as a primary disinfectant, destroying any toxic compounds in the source water and may assist in the removal of algae and cyanobacteria toxins. This paper discusses studies in precursor removal and control of THMs

  13. Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons

    Energy Technology Data Exchange (ETDEWEB)

    Abramowicz, H. [Tel Aviv Univ. (Israel). School of Physics; Max-Planck-Institut fuer Physik, Muenchen (Germany); Abt, I. [Max-Planck-Institut fuer Physik, Muenchen (Germany); Adamczyk, L. [AGH-Univ. of Science and Technology, Cracow (PL). Faculty of Physics and Applied Computer Science] (and others)

    2011-01-15

    The production of beauty quarks in ep interactions has been studied with the ZEUS detector at HERA for exchanged four-momentum squared Q{sup 2}>10 GeV{sup 2}, using an integrated luminosity of 363 pb{sup -1}. The beauty events were identified using electrons from semileptonic b decays with a transverse momentum 0.9 production were measured and compared with next-to-leading-order QCD calculations. The beauty contribution to the proton structure function F{sub 2} was extracted from the double-differential cross section as a function of Bjorken-x and Q{sup 2}. (orig.)

  14. Ability of dairy cows to ensure pregnancy according to breed and genetic merit for production traits under contrasted pasture-based systems.

    Science.gov (United States)

    Bedere, N; Disenhaus, C; Ducrocq, V; Leurent-Colette, S; Delaby, L

    2017-04-01

    The present study aimed to assess and measure the effects of breed, genetic merit for production traits, and feeding systems (FS) on the ability of dairy cows to ensure pregnancy through its components (fertilization, embryonic losses, recalving). An experiment was conducted over 9 yr on Normande and Holstein cows assigned to contrasted FS. Diets were based on maize silage in winter and grazing plus concentrate in spring in the high FS group, and on grass silage in winter and grazing with no concentrate during spring in the low FS group. Within breeds, cows were classified into 2 groups with similar estimated breeding values (EBV) for milk solids: cows with high EBV for milk yield were included in a milk group and those with high EBV for fat and protein contents were included in a content group. Holstein cows produced more milk throughout lactation than Normande cows (the differential was greater in the high FS group, +2,294 kg, compared with +1,280 kg in the low FS group) and lost more body condition to nadir (the differential was greater in the high FS group, -1.00 point, compared with -0.80 point in the low FS group). Within breeds, milk solids production was similar between genetic groups. Cows in the high FS group produced more milk (+2,495 kg for Holstein and +1,481 kg for Normande cows) and had a higher body condition score at nadir (+0.40 point for Holstein and +0.60 point for Normande) than cows in the low FS group. Holstein cows had a lower recalving rate than Normande cows (-19 percentage units). We found no effect of genetic group and FS on fertility of Normande cows. However, according to FS, Holstein cows in the content group exhibited different fertility failure patterns. In the low FS group, Holstein cows in the content group had more nonfertilizations or early embryo mortality (+26 percentage units at first and second services) than Holstein cows in the milk group. In the high FS group, Holstein cows in the content group had a higher proportion of

  15. Methane-Fueled Syntrophy through Extracellular Electron Transfer: Uncovering the Genomic Traits Conserved within Diverse Bacterial Partners of Anaerobic Methanotrophic Archaea.

    Science.gov (United States)

    Skennerton, Connor T; Chourey, Karuna; Iyer, Ramsunder; Hettich, Robert L; Tyson, Gene W; Orphan, Victoria J

    2017-08-01

    The anaerobic oxidation of methane by anaerobic methanotrophic (ANME) archaea in syntrophic partnership with deltaproteobacterial sulfate-reducing bacteria (SRB) is the primary mechanism for methane removal in ocean sediments. The mechanism of their syntrophy has been the subject of much research as traditional intermediate compounds, such as hydrogen and formate, failed to decouple the partners. Recent findings have indicated the potential for extracellular electron transfer from ANME archaea to SRB, though it is unclear how extracellular electrons are integrated into the metabolism of the SRB partner. We used metagenomics to reconstruct eight genomes from the globally distributed SEEP-SRB1 clade of ANME partner bacteria to determine what genomic features are required for syntrophy. The SEEP-SRB1 genomes contain large multiheme cytochromes that were not found in previously described free-living SRB and also lack periplasmic hydrogenases that may prevent an independent lifestyle without an extracellular source of electrons from ANME archaea. Metaproteomics revealed the expression of these cytochromes at in situ methane seep sediments from three sites along the Pacific coast of the United States. Phylogenetic analysis showed that these cytochromes appear to have been horizontally transferred from metal-respiring members of the Deltaproteobacteria such as Geobacter and may allow these syntrophic SRB to accept extracellular electrons in place of other chemical/organic electron donors. IMPORTANCE Some archaea, known as anaerobic methanotrophs, are capable of converting methane into carbon dioxide when they are growing syntopically with sulfate-reducing bacteria. This partnership is the primary mechanism for methane removal in ocean sediments; however, there is still much to learn about how this syntrophy works. Previous studies have failed to identify the metabolic intermediate, such as hydrogen or formate, that is passed between partners. However, recent analysis of

  16. Quantifying the potential export flows of used electronic products in Macau: a case study of PCs.

    Science.gov (United States)

    Yu, Danfeng; Song, Qingbin; Wang, Zhishi; Li, Jinhui; Duan, Huabo; Wang, Jinben; Wang, Chao; Wang, Xu

    2017-12-01

    The used electronic product (UEP) has attracted the worldwide attentions because part of e-waste may be exported from developed countries to developing countries in the name of UEP. On the basis of large foreign trade data of electronic products (e-products), this study adopted the trade data approach (TDA) to quantify the potential exports of UEP in Macau, taking a case study of personal computers (PCs). The results show that the desktop mainframes, LCD monitors, and CRT monitors have more low-unit-value trades with higher trade volumes in the past 10 years, while the laptop and tablet PCs, as the newer technologies, owned the higher ratios of the high-unit-value trades. During the period of 2005-2015, the total mean exports for used laptop and tablet PCs, desktop mainframes, and LCD monitors were approximately 18,592, 79,957, and 43,177 units, respectively, while the possible export volume of used CRT monitors was higher, up to 430,098 units in 2000-2010. Noticed that these potential export volumes could be the lower bound because not all used PCs may be shipped using the PC trade code. For all the four kinds of used PCs, the majority (61.6-98.82%) of the export volumes have gone to Hong Kong, followed by Mainland China and Taiwan. Since 2011, there was no CRT monitor export; however, the other kinds of used PC exports will still exist in Macau in the future. The outcomes are helpful to understand and manage the current export situations of used products in Macau, and can also provide a reference for other countries and regions.

  17. Personality Traits as Factors Affecting E-Book Adoption among College Students: Does Personality Matter?

    Directory of Open Access Journals (Sweden)

    Nurkaliza Bt Khalid

    2013-11-01

    Full Text Available Electronic materials such as e-book have become increasingly accepted as learning tools in the classroom nowadays. This study investigated the relationships between the big five personality traits: conscientiousness, agreeableness, neuroticism, openness to experience, and extroversion with e-book adoption among college students. Pearson Product Moment Correlation and Multiple Regressions were conducted to analyze the data. Results revealed statistically significant relationships between the personality traits (conscientiousness, agreeableness, openness to experience, extraversion and e-book adoption. Implications of the findings are also discussed.

  18. 77 FR 5275 - Used Electronic Products: An Examination of U.S. Exports; Institution of Investigation and...

    Science.gov (United States)

    2012-02-02

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 332-528] Used Electronic Products: An... itself, and (4) disposed of by the exporter itself; and The factors affecting trade in used electronic... International Trade Commission. ACTION: Institution of investigation and scheduling of public hearing. SUMMARY...

  19. Matrix-product-state method with local basis optimization for nonequilibrium electron-phonon systems

    Science.gov (United States)

    Heidrich-Meisner, Fabian; Brockt, Christoph; Dorfner, Florian; Vidmar, Lev; Jeckelmann, Eric

    We present a method for simulating the time evolution of quasi-one-dimensional correlated systems with strongly fluctuating bosonic degrees of freedom (e.g., phonons) using matrix product states. For this purpose we combine the time-evolving block decimation (TEBD) algorithm with a local basis optimization (LBO) approach. We discuss the performance of our approach in comparison to TEBD with a bare boson basis, exact diagonalization, and diagonalization in a limited functional space. TEBD with LBO can reduce the computational cost by orders of magnitude when boson fluctuations are large and thus it allows one to investigate problems that are out of reach of other approaches. First, we test our method on the non-equilibrium dynamics of a Holstein polaron and show that it allows us to study the regime of strong electron-phonon coupling. Second, the method is applied to the scattering of an electronic wave packet off a region with electron-phonon coupling. Our study reveals a rich physics including transient self-trapping and dissipation. Supported by Deutsche Forschungsgemeinschaft (DFG) via FOR 1807.

  20. Direct electron-pair production by high energy heavy charged particles

    Science.gov (United States)

    Takahashi, Y.; Gregory, J. C.; Hayashi, T.; Dong, B. L.

    1989-01-01

    Direct electron pain production via virtual photons by moving charged particles is a unique electro-magnetic process having a substantial dependence on energy. Most electro-magnetic processes, including transition radiation, cease to be sensitive to the incident energy above 10 TeV/AMU. Thus, it is expected, that upon establishment of cross section and detection efficiency of this process, it may provide a new energy measuring technique above 10 TeV/AMU. Three accelerator exposures of emulsion chambers designed for measurements of direct electron-pains were performed. The objectives of the investigation were to provide the fundamental cross-section data in emulsion stacks to find the best-fit theoretical model, and to provide a calibration of measurements of direct electron-pairs in emulsion chamber configurations. This paper reports the design of the emulsion chambers, accelerator experiments, microscope measurements, and related considerations for future improvements of the measurements, and for possible applications to high energy cosmic ray experiments. Also discussed are the results from scanning 56m of emulsion tracks at 1200x magnification so that scanning efficiency is optimized. Measurements of the delta-ray range spectrum were also performed for much shorter track lengths, but with sufficiently large statistics in the number of measured delta-rays.

  1. Production of excited nitrogen atoms and ions by electron impact on nitrogen molecules

    International Nuclear Information System (INIS)

    Rall, D.L.A.; Anderson, L.W.; Lin, C.C.; Sharpton, F.A.

    1984-01-01

    Emission lines of the N atoms and N ions are produced by electron-beam dissociative excitation of N 2 molecules. The ns→3 /sub p/ (n=5 to 9), np→3s (n=3 to 7), nd→3 /sub p/ (n=4 to 8), nf→3d (n=4,5) transitions of N and the 3 /sub p/ →3s, 3d→3p, 4s→3p, 4p→3d, 4f→3d transitions of N + have been observed and optical emission cross sections at various incident electron energies have been measured. The energy dependence of the cross sections of the N emission lines is similar to that of the N + lines at high incident electron energies, but the low-energy behaviors are quite different. These features are explained by the mechanisms involved in the production of the excited N atoms and N + ions. Absolute optical emission cross sections for the N and N + lines are presented

  2. Resource conservation approached with an appropriate collection and upgrade-remanufacturing for used electronic products.

    Science.gov (United States)

    Zlamparet, Gabriel I; Tan, Quanyin; Stevels, A B; Li, Jinhui

    2018-03-01

    This comparative research represents an example for a better conservation of resources by reducing the amount of waste (kg) and providing it more value under the umbrella of remanufacturing. The three discussed cases will expose three issues already addressed separately in the literature. The generation of waste electrical and electronic equipment (WEEE) interacts with the environmental depletion. In this article, we gave the examples of addressed issues under the concept of remanufacturing. Online collection opportunity eliminating classical collection, a business to business (B2B) implementation for remanufactured servers and medical devices. The material reuse (recycling), component sustainability, reuse (part harvesting), product reuse (after repair/remanufacturing) indicates the recovery potential using remanufacturing tool for a better conservation of resources adding more value to the products. Our findings can provide an overview of new system organization for the general collection, market potential and the technological advantages using remanufacturing instead of recycling of WEEE or used electrical and electronic equipment. Copyright © 2017. Published by Elsevier Ltd.

  3. Study on application of the physical detection methods for electron beam-irradiated agricultural products

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Yong; Park, Yong Dae; Jin, Chang Hyun; Choi, Dae Seong; Jeong, Il Yun [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Yook, Hong Sun [Chungnam National University, Daejeon (Korea, Republic of)

    2010-09-15

    Physical detection methods, photostimulated luminescence (PSL), thermoluminescence (TL) and electron spin resonance (ESR) were applied to detect electron beam-irradiated agricultural products, such as red pepper, black pepper, raisin, walnut, beef seasoning and pistachio. The absorbed irradiation doses for representative samples were controlled at 0, 1, 3, 5 and 10 kGy. PSL values for non-irradiated samples were <700 counts/60s (lower threshold, T{sub 1}) except beef seasoning, whereas those of irradiated samples were more than 5,000 photon counts, upper threshold (T{sub 2}) in black pepper, raisin, and beef seasoning and intermediates values of T{sub 1}-T{sub 2} in red pepper, walnut, and pistachio. Minerals separated from the samples for TL measurement showed that non-irradiated samples except pistachio (TL ratio, 0.12) were characterized by no glow curves situated at temperature range of 50 {approx} 400 .deg. C with TL ratio (0.01 {approx} 0.08), while irradiated samples except pistachio at only 1 kGy (TL ratio, 0.08) indicated glow curve at about 150 {approx} 250 .deg. C with TL ratio (0.28 {approx} 3.10). ESR measurements of irradiated samples any specific signals to irradiation. The samples of both red pepper ad pistachio were produced specific signals derived from cellulose radicals as well as single line signals for black pepper and walnut, and multiple signals derived from crystalline sugar radicals for raisin and beef seasoning. In conclusion, The ESR methods can apply for detection of pistachio exposed to electron beam but PSL and TL are not suitable methods. Furthermore, TL and ESR suggested that both techniques were more useful detection method than PSL to confirm whether red pepper, walnut and beef seasoning samples have been exposed to electron beam.

  4. Study on application of the physical detection methods for electron beam-irradiated agricultural products

    International Nuclear Information System (INIS)

    Kim, Dong Yong; Park, Yong Dae; Jin, Chang Hyun; Choi, Dae Seong; Jeong, Il Yun; Yook, Hong Sun

    2010-01-01

    Physical detection methods, photostimulated luminescence (PSL), thermoluminescence (TL) and electron spin resonance (ESR) were applied to detect electron beam-irradiated agricultural products, such as red pepper, black pepper, raisin, walnut, beef seasoning and pistachio. The absorbed irradiation doses for representative samples were controlled at 0, 1, 3, 5 and 10 kGy. PSL values for non-irradiated samples were 1 ) except beef seasoning, whereas those of irradiated samples were more than 5,000 photon counts, upper threshold (T 2 ) in black pepper, raisin, and beef seasoning and intermediates values of T 1 -T 2 in red pepper, walnut, and pistachio. Minerals separated from the samples for TL measurement showed that non-irradiated samples except pistachio (TL ratio, 0.12) were characterized by no glow curves situated at temperature range of 50 ∼ 400 .deg. C with TL ratio (0.01 ∼ 0.08), while irradiated samples except pistachio at only 1 kGy (TL ratio, 0.08) indicated glow curve at about 150 ∼ 250 .deg. C with TL ratio (0.28 ∼ 3.10). ESR measurements of irradiated samples any specific signals to irradiation. The samples of both red pepper ad pistachio were produced specific signals derived from cellulose radicals as well as single line signals for black pepper and walnut, and multiple signals derived from crystalline sugar radicals for raisin and beef seasoning. In conclusion, The ESR methods can apply for detection of pistachio exposed to electron beam but PSL and TL are not suitable methods. Furthermore, TL and ESR suggested that both techniques were more useful detection method than PSL to confirm whether red pepper, walnut and beef seasoning samples have been exposed to electron beam

  5. Radiological protection problems associated with parasitic X-ray emission from electronic products

    International Nuclear Information System (INIS)

    Amlinger, G.; Anger, K.; Billaudelle, H.; Ehlers, J.; Fendt, H.W.; Festag, J.G.; Haug, R.; Herrmann, K.H.; Klein, H.; Kossel, F.; Krebs, A.; Lauterbach, U.; Leibssle, H. Fa.; Lustig, H.; Maushart, R.; Milde, K.G.; Peter, F.; Ritter, J.; Riecke, W.D.; Rosenbaum, O.; Schiekel, M. Fa.; Schleich, F.; Schmidt, Th.; Speyer, K.; Teschke, L.; Tzschaschel, R.; Wagner, H.; Wehner, G.; Wendel, W.; Zehender, E.; Aiginoer, H.; Zakovsky, J.; Blom, G.; De backer, J.; Delhove, J.; Hublet, P.; Lejeune, P.; Misslin, A.; Nuyts, R.; Popovitch, I.; Hjardemaal, O.; Oehlenschlaeger, N.; Gonzalez Del Campo, R.; Becker, S.; Elder, R.L.; Matthews, J.D.; Sheldon, J.L.; Viitaniemi, T.J.; Aouizerate, H.; Aymeric, H.; Barthe, J.; Bermann, F.; Berthaud, Madeleine; Blanc, D.; Bory, P.; Bourrieau, J.; Bouville, A.; Bovagne, H.; Bresson, G.; Casanovas, J.; Cassanhiol, E.; Cassanhiol, E.; Chambragne, J.; Chanteur, J.; Choquet, R.; Cluchet, J.; Commanay, L.; Commanay, P.; Cros, J.L.; Dana, M.; Danna, J.; Decossas, J.L.; Delpla, M.; Destame, D.; Dieval, M.; Drouet, J.; Dubec, A.; Galy, J.; Garnier, A.; Gouerne, R.; Gras, M.; Grob, R.; Guelfucci, J.P.; Guevenoux, J.; Guichardiere, R.; Hamard, J.; Hardy, J.; Haym, J.P.; Hionette, J.; Jacob, G.; Lavie, J.M.; Levy, L.; Logre, P.; Manquene, J.; Martin, H.; Mathieu, J.; Odievre, Monique; Oustrin, J.; Palluel, P.; Patau, J.P.; Penotet, H.; Perrot, A.; Petel, M.; Peyrelavigne, A.; Peyrelavigne, Monique; Provincial, M.; Raedersdorff, J.; Renard, Cl.; Roche, L.; Roche, R.; Schaeffer, R.; Soubiran, J.; Soudain, G.; Stern, J.C.; Terrissol, M.; Tixier, M.; Vialettes, H.; Wauquier, J.M.; Casbolt, P.N.; Ciuciura, A.; Goodhew, E.G.; Jones, I.S.; O'riordan, M.C.; Speight, D.L.; Ward, P.R.; Williams, K.F.; Biro, T.; Vago, G.; Rosental, N.; Argiero, L.; Belli, M.; Boggio, M.; Carfi, N.; Garretti, S.; Loppa, A.; Parisi, A.; Susanna, A.; Ogawa, I.; Koren, K.; Aten, J.B.Th.; Barendsen, G.W.; Den Boer, A.M.; De Pijper, M.A.; Hekman, H.; Julius, H.W.; Strackee, L.; Van daatselaar, G.; Lorentzon, L.; Hadzi-Pealo, M.; Jeremio, M.; Stevanovio, Marija; Oosterkamp, W.J.; Shalmon, E.; Doyen, Diana; Goetschalkx, J.; Puel, R.

    1971-03-01

    During the past few decades there has been an increase in the production of many types of electronic devices such as rectifying tubes, thyratrons, klystrons, magnetrons, etc., containing elements capable of emitting undesirable X-radiation. These components are not only found in equipment used in industry and research laboratories, but also in devices of a more domestic nature, such as colour television sets, usually low in energy, this radiation may nevertheless constitute a health hazard for many users of such devices and may affect not only workers but even the population as a whole. The Commission of the European Communities (Euratom) felt it was desirable to review the state of the art with regard to problems of radiological protection arising in the manufacture, repair and use of such electronic equipment and to seek suitable technical and administrative solutions. In conjunction with the Centre Physique Atomique et Nucleaire of the Paul Sabatier University, the Commission held an International Symposium in Toulouse on 3-6 November 1970, which was attended by manufacturers of electronic equipment, officials of technical inspection bodies and representatives of public health and occupational safety authorities. The following items were discussed: classification and identification of sources of parasitic X-rays, methods of measuring soft X-rays, biological aspects of exposure to soft X-rays, performance standards and methods for testing and inspecting electronic equipment. The Symposium was followed attentively by 180 delegates from 21 countries and international organizations, and was concluded by a round table discussion at which the chairmen of the different sessions, assisted by experts, drew conclusions from their sessions and from the discussions, pointing up the problems which needed most urgently to be studied. This document contains the texts, in their original versions, of the papers presented at the meetings, together with the minutes of the

  6. A New View at the Planning Marketing Popular Products: Exploratory Study Electronics Sector with Companies in Brazil.

    Directory of Open Access Journals (Sweden)

    Evange Elias Assis

    2015-06-01

    Full Text Available The increased consumption of appliance and electronic products by lower-income population represented a growth opportunity for companies in the sector. The overall objective of this paper is to investigate how appliance and electronic product manufacturers draw up their marketing planning for low-end products. An exploratory approach was taken in this study, comprising the literature review and the empirical research which was conducted in two stages by combining the qualitative and quantitative approaches. The study group comprised companies affiliated with National Association of Appliance and Electronic Product Manufacturers (ELETROS. Results indicate that in 87.5% of cases the marketing planning focuses on the product. The companies are concerned to differentiate the low-end products on the market mainly by design (87.5% and innovation (62.5%. Within this context, it seems that the opportunity for growth of the appliance and electronic product companies can be boosted when implementing specific marketing planning for low-end products. Innovation is needed in all processes from project design of the product to its distribution. 

  7. Whole Trait Theory

    Science.gov (United States)

    Fleeson, William; Jayawickreme, Eranda

    2014-01-01

    Personality researchers should modify models of traits to include mechanisms of differential reaction to situations. Whole Trait Theory does so via five main points. First, the descriptive side of traits should be conceptualized as density distributions of states. Second, it is important to provide an explanatory account of the Big 5 traits. Third, adding an explanatory account to the Big 5 creates two parts to traits, an explanatory part and a descriptive part, and these two parts should be recognized as separate entities that are joined into whole traits. Fourth, Whole Trait Theory proposes that the explanatory side of traits consists of social-cognitive mechanisms. Fifth, social-cognitive mechanisms that produce Big-5 states should be identified. PMID:26097268

  8. Intercomparison of Unmanned Aerial Vehicle and Ground-Based Narrow Band Spectrometers Applied to Crop Trait Monitoring in Organic Potato Production

    Directory of Open Access Journals (Sweden)

    Marston Héracles Domingues Franceschini

    2017-06-01

    Full Text Available Vegetation properties can be estimated using optical sensors, acquiring data on board of different platforms. For instance, ground-based and Unmanned Aerial Vehicle (UAV-borne spectrometers can measure reflectance in narrow spectral bands, while different modelling approaches, like regressions fitted to vegetation indices, can relate spectra with crop traits. Although monitoring frameworks using multiple sensors can be more flexible, they may result in higher inaccuracy due to differences related to the sensors characteristics, which can affect information sampling. Also organic production systems can benefit from continuous monitoring focusing on crop management and stress detection, but few studies have evaluated applications with this objective. In this study, ground-based and UAV spectrometers were compared in the context of organic potato cultivation. Relatively accurate estimates were obtained for leaf chlorophyll (RMSE = 6.07 µg·cm−2, leaf area index (RMSE = 0.67 m2·m−2, canopy chlorophyll (RMSE = 0.24 g·m−2 and ground cover (RMSE = 5.5% using five UAV-based data acquisitions, from 43 to 99 days after planting. These retrievals are slightly better than those derived from ground-based measurements (RMSE = 7.25 µg·cm−2, 0.85 m2·m−2, 0.28 g·m−2 and 6.8%, respectively, for the same period. Excluding observations corresponding to the first acquisition increased retrieval accuracy and made outputs more comparable between sensors, due to relatively low vegetation cover on this date. Intercomparison of vegetation indices indicated that indices based on the contrast between spectral bands in the visible and near-infrared, like OSAVI, MCARI2 and CIg provided, at certain extent, robust outputs that could be transferred between sensors. Information sampling at plot level by both sensing solutions resulted in comparable discriminative potential concerning advanced stages of late blight incidence. These results indicate that optical

  9. Estimativas de repetibilidade de alguns caracteres de produção em mangueira Estimate of repeatability of some traits of production in mango tree

    Directory of Open Access Journals (Sweden)

    João Gomes da Costa

    2003-04-01

    Full Text Available O presente trabalho objetivou estimar o coeficiente de repetibilidade para os caracteres número total de frutos por planta (NTF, produção de frutos por planta (PFP e peso médio de fruto (PMF, e determinar o número mínimo de avaliações que devem ser feitas para uma predição acurada do valor real dos indivíduos. As estimativas de repetibilidade foram realizadas pelo método dos componentes principais a partir da matriz de correlação. Os coeficientes de repetibilidade estimados foram de: 0,51; 0,53 e 0,81, associados aos coeficientes de determinação (R² de 80,44%, 81,60% e 94,41% respectivamente, para NTF, PFP e PMF. A estimativa do coeficiente de repetibilidade da característica peso médio do fruto demonstrou alta regularidade na superioridade dos indivíduos de um ciclo para outro, sendo necessários três ciclos de avaliações para predizer o valor real dos indivíduos com nível de certeza acima de 90%. Apesar de as características número de frutos por planta e produção de frutos por planta terem influência ambiental, quatro medições permitem obter coeficientes de determinação próximos de 80%.The objective of this papers was to estimate the repeatability coefficient of the total number of fruit per plant (TNF, production of fruit per plant (PFP and average fruit weight (AWF, while the number of measures that should be performed for an efficient selection of the genotypes under evaluation were determined. Analysis were made using principal components. The estimates of the repeatability were of: 0.51; 0.53 and 0.81, associated to the determination coefficients (R² of 80.44%, 81.60% and 94.41, respectively, for TNF, PFP and WMF. The estimate of the repeatability coefficient of the WMF demonstrated high regularity at the superiority of the individuals from one cycle to another, so the evaluation of three cycles was enough to predict the individual real value with R² above 90%. In spite of the traits TNF and PFP have

  10. Other tobacco product and electronic cigarette use among homeless cigarette smokers.

    Science.gov (United States)

    Baggett, Travis P; Campbell, Eric G; Chang, Yuchiao; Rigotti, Nancy A

    2016-09-01

    We determined the prevalence and correlates of other tobacco product and electronic cigarette (e-cigarette) use in a clinic-based sample of homeless cigarette smokers. In April-July 2014, we used time-location sampling to conduct a cross-sectional, in-person survey of 306 currently homeless adult cigarette smokers recruited from 5 clinical sites at Boston Health Care for the Homeless Program. We assessed past-month use of large cigars, little cigars, smokeless tobacco, and e-cigarettes. Among those who had used e-cigarettes, we assessed the reasons for doing so. We used logistic regression analysis to identify the participant characteristics associated with the use of each product. Eighty-six percent of eligible individuals participated in the survey. In the past month, 37% of respondents used large cigars, 44% used little cigars, 8% used smokeless tobacco, 24% used an e-cigarette, and 68% used any of these products. Reasons for e-cigarette use included curiosity (85%) and to help quit conventional cigarettes (69%). In multivariable regression analyses, homeless smokers with greater subsistence difficulties were more likely to use little cigars (p=0.01) and less likely to use e-cigarettes (p=0.001). Non-Hispanic black (p=0.01), Hispanic (pcigars. Readiness to quit was not associated with other tobacco product use but was significantly associated with e-cigarette use to help quit smoking (p=0.02). Health care providers who serve homeless people should consider routine screening for the use of other tobacco products and e-cigarettes to help guide smoking cessation discussions and tobacco treatment planning. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Production of microbunched beams of very highly charged ions with an electron beam ion source

    International Nuclear Information System (INIS)

    Stoeckli, M.P.

    1998-01-01

    Electron beam ion sources produce very highly charged ions most efficiently in a batch mode as the confinement time can be directly optimized for the production of the desired charge state. If, after confinement, the voltage of the ion-confining downstream dam is lowered rapidly, all ions escape and form an ion beam pulse with a length of a few tens of μs. Raising the main trap voltage while maintaining a constant dam voltage in a open-quotes spill-over expulsionclose quotes reduces the energy spread of the expelled ions. The longer time periods of open-quotes slow-,close quotes open-quotes leaky batch mode-,close quotes and open-quotes direct current (dc) batch mode-close quotes expulsions allow for increasing the ion beam duty cycle. Combining the rapid expulsion with one of the latter methods allows for the expulsion of the ions of a single batch in many small microbunches with variable intervals, maintaining the low energy spread and the increased duty cycle of slow expulsions. Combining the open-quotes microbunchingclose quotes with open-quotes dc batch mode productionclose quotes and a multitrap operation will eventually allow for the production of equally intense ion bunches over a wide range of frequencies without any deadtime, and with minimal compromise on the most efficient production parameters. copyright 1998 American Institute of Physics

  12. Electron-positron pair production and bremsstrahlung at intermediate energies in the field of heavy atoms

    International Nuclear Information System (INIS)

    Lee, R.N.; Milstein, A.I.; Strakhovenko, V.M.; Schwartz, O.Ya.

    2006-01-01

    The Coulomb corrections (CC) to the processes of bremsstrahlung and pair production are investigated. The next-to-leading term in the high-energy asymptotics is found. This term becomes very essential in the region of intermediate energies. The influence of screening for CC is small for differential cross section, spectrum, and the total cross section of pair production. The same is true for the spectrum of bremsstrahlung, but not for the differential cross section, where the influence of screening can be very large. The corresponding screening corrections as well as the modification of the differential cross section of bremsstrahlung are found. A comparison of our results for the total cross section of pair production with the experimental data available is performed. This comparison has justified our analytical results and allowed to elaborate a simple ansatz for the next-to-leading correction. The influence of the electron beam shape on CC for bremsstrahlung is investigated. It turns out that the differential cross section is very sensitive to this shape

  13. Effects of an applied voltage on direct interspecies electron transfer via conductive materials for methane production.

    Science.gov (United States)

    Lee, Jung-Yeol; Park, Jeong-Hoon; Park, Hee-Deung

    2017-10-01

    Direct interspecies electron transfer (DIET) between exoelectrogenic bacteria and methanogenic archaea via conductive materials is reported as an efficient method to produce methane in anaerobic organic waste digestion. A voltage can be applied to the conductive materials to accelerate the DIET between two groups of microorganisms to produce methane. To evaluate this hypothesis, two sets of anaerobic serum bottles with and without applied voltage were used with a pair of graphite rods as conductive materials to facilitate DIET. Initially, the methane production rate was similar between the two sets of serum bottles, and later the serum bottles with an applied voltage of 0.39V showed a 168% higher methane production rate than serum bottles without an applied voltage. In cyclic voltammograms, the characteristic redox peaks for hydrogen and acetate oxidation were identified in the serum bottles with an applied voltage. In the microbial community analyses, hydrogenotrophic methanogens (e.g. Methanobacterium) were observed to be abundant in serum bottles with an applied voltage, while methanogens utilizing carbon dioxide (e.g., Methanosaeta and Methanosarcina) were dominant in serum bottles without an applied voltage. Taken together, the applied voltage on conductive materials might not be effective to promote DIET in methane production. Instead, it appeared to generate a condition for hydrogenotrophic methanogenesis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Traits traded off

    NARCIS (Netherlands)

    Rueffler, Claus

    2006-01-01

    The course of evolution is restricted by constraints. A special type of constraint is a trade-off where different traits are negatively correlated. In this situation a mutant type that shows an improvement in one trait suffers from a decreased performance through another trait. In a fixed fitness

  15. Relationships between production and product traits in ...

    African Journals Online (AJOL)

    Phylogenetic relationships between the five Bonsmara strains and between the two Nguni subpopulations were determined by means of blood typing. Growth performance, carcass characteristics and meat quality characteristics were compared between the sub-populations of each breed. Genetic distances between the ...

  16. Measurements of absolute M-subshell X-ray production cross sections of Th by electron impact

    Energy Technology Data Exchange (ETDEWEB)

    Moy, A., E-mail: aurelien.moy@cea.fr [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France); Merlet, C. [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); Dugne, O. [CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France)

    2014-08-31

    Highlights: • The M X-ray production cross sections of Th were measured by electron impact. • The M-subshell ionization cross sections of Th were determined from 3 to 38 keV. • Theoretical ionization cross-sections are in agreement with our experimental results. - Abstract: Measurements of absolute M-subshell X-ray production cross sections for element Th were made by electron impact for energies ranging from the ionization threshold up to 38 keV. Experimental data were obtained by measuring the X-ray intensity emitted from ultrathin Th films deposited onto self-supporting C backing films. The measurements were conducted with an electron microprobe using high-resolution wavelength dispersive spectrometers. Recorded intensities were converted into absolute X-ray production cross sections by means of atomic data and estimation of the number of primary electrons, target thickness, and detector efficiency. Our experimental X-ray production cross sections, the first to be reported for the M subshells of Th, are compared with X-ray production cross sections calculated with the mean of ionization cross sections obtained from the distorted-wave Born approximation. The Mα X-ray production cross section calculated is in excellent agreement with the measurements, allowing future use for standardless quantification in electron probe microanalysis.

  17. Production of electronic grade lunar silicon by disproportionation of silicon difluoride

    Science.gov (United States)

    Agosto, William N.

    1993-01-01

    Waldron has proposed to extract lunar silicon by sodium reduction of sodium fluorosilicate derived from reacting sodium fluoride with lunar silicon tetrafluoride. Silicon tetrafluoride is obtained by the action of hydrofluoric acid on lunar silicates. While these reactions are well understood, the resulting lunar silicon is not likely to meet electronic specifications of 5 nines purity. Dale and Margrave have shown that silicon difluoride can be obtained by the action of silicon tetrafluoride on elemental silicon at elevated temperatures (1100-1200 C) and low pressures (1-2 torr). The resulting silicon difluoride will then spontaneously disproportionate into hyperpure silicon and silicon tetrafluoride in vacuum at approximately 400 C. On its own merits, silicon difluoride polymerizes into a tough waxy solid in the temperature range from liquid nitrogen to about 100 C. It is the silicon analog of teflon. Silicon difluoride ignites in moist air but is stable under lunar surface conditions and may prove to be a valuable industrial material that is largely lunar derived for lunar surface applications. The most effective driver for lunar industrialization may be the prospects for industrial space solar power systems in orbit or on the moon that are built with lunar materials. Such systems would require large quantities of electronic grade silicon or compound semiconductors for photovoltaics and electronic controls. Since silicon is the most abundant semimetal in the silicate portion of any solar system rock (approximately 20 wt percent), lunar silicon production is bound to be an important process in such a solar power project. The lunar silicon extraction process is discussed.

  18. Electron accelerator-based production of molybdenum-99: Bremsstrahlung and photoneutron generation from molybdenum vs. tungsten

    Energy Technology Data Exchange (ETDEWEB)

    Tsechanski, A. [Ben-Gurion University of the Negev, Department of Nuclear Engineering, P.O. Box 653, Beer-Sheva 84105 (Israel); Bielajew, A.F. [Department of Nuclear Engineering and Radiological Sciences, The University of Michigan, 2355 Bonisteel Boulevard, Ann Arbor, MI 48109 (United States); Archambault, J.P.; Mainegra-Hing, E. [National Research Council of Canada, Ionizing Radiation Standards Laboratory, Ottawa, ON K1A 0R6 (Canada)

    2016-01-01

    A new “one-stage” approach for production of {sup 99}Mo and other radioisotopes by means of an electron linear accelerator is described. It is based on using a molybdenum target both as a bremsstrahlung converter and as a radioisotope producing target for the production of {sup 99}Mo via the photoneutron reaction {sup 100}Mo(γ,n){sup 99}Mo. Bremsstrahlung characteristics, such as bremsstrahlung efficiency, angular distribution, and energy deposition for molybdenum targets were obtained by means of the EGSnrc Monte Carlo simulation code system. As a result of our simulations, it is concluded that a 60 MeV electron beam incident on a thick Mo target will have greater bremsstrahlung efficiency than the same thickness (in units of r{sub 0}) W target, for target thickness z > 1.84r{sub 0}, where r{sub 0} is the electron range. A 50 MeV electron beam incident on a Mo target will result in greater bremsstrahlung efficiency than the same thickness W target (in units of r{sub 0}) for target thickness case: z ⩾ 2.0r{sub 0}. It is shown for the one-stage approach with thicknesses of (1.84–2.0)r{sub 0}, that the {sup 99}Mo-production bremsstrahlung efficiency of a molybdenum target is greater by ∼100% at 30 MeV and by ∼70% at 60 MeV compared to the values for tungsten of the same thickness (in units of the appropriate r{sub 0}) in the traditional two-stage approach (W converter and separate {sup 99}Mo producing target). This advantage of the one-stage approach arises from the fact that the bremsstrahlung produced is attenuated only once from attenuation in the molybdenum converter/target. In the traditional, two-stage approach, the bremsstrahlung generated in the W-converter/target is attenuated both in the converter in the {sup 99}Mo-producing molybdenum target. The photoneutron production yield of molybdenum and tantalum (as a substitute for tungsten) target was calculated by means of the MCNP5 transport code. On the basis of these data, the specific activity

  19. The Level of Brand Awareness in Consumer Electronic Products: The Example of Kazakhstan and Kyrgyzstan

    Directory of Open Access Journals (Sweden)

    Kutay Oktay

    2015-03-01

    Full Text Available Brand awareness which is considered as one of the most important factor affecting the consumer purchasing preferences has been investigated by both academics and practitioners in the field of marketing in recent years. The current study investigated brand awareness in Kazakhstan and Kyrgyzstan regarding consumer electronic products, such as laptop computers, tablet computers, and cell phones. To determine brand awareness, data were obtained by using suitable market analysis methods, andthen analyzed by using the Spearman correlation and the chi-square test for independence.Based on the study results, it was observed that the level brand awareness was high for laptop computers and cell phones, while being comparatively lower for tablet computers.

  20. The factors affecting the green brand equity of electronic products: Green marketing

    Directory of Open Access Journals (Sweden)

    Narges Delafrooz

    2015-12-01

    Full Text Available This study is intentionally functional, and, from the data collection aspect, is a descriptive survey. The statistical data for the present study includes low-power electronic and electric products in Guilan Province. A total of 384 consumers were chosen using the random cluster sampling method. We have used confirmatory factor analysis and structural equation modeling to analyze the given data. The findings show that there is a significant relationship among brand-perceived quality, green brand image, (GBI and brand value, but not with the green brand-perceived value (GBPV. In addition, the results of the study show that brand credibility has a significant relationship with the GBPV and GBI, but not with the GBPV and GBI, each of which are associated with the green brand in a different way. At the end of this survey, you will read about the intermediate variables, all of which are acceptable, except the intermediate variables of brand credibility and GBI.

  1. Modelling and Simulation of National Electronic Product Code Network Demonstrator Project

    Science.gov (United States)

    Mo, John P. T.

    The National Electronic Product Code (EPC) Network Demonstrator Project (NDP) was the first large scale consumer goods track and trace investigation in the world using full EPC protocol system for applying RFID technology in supply chains. The NDP demonstrated the methods of sharing information securely using EPC Network, providing authentication to interacting parties, and enhancing the ability to track and trace movement of goods within the entire supply chain involving transactions among multiple enterprise. Due to project constraints, the actual run of the NDP was 3 months only and was unable to consolidate with quantitative results. This paper discusses the modelling and simulation of activities in the NDP in a discrete event simulation environment and provides an estimation of the potential benefits that can be derived from the NDP if it was continued for one whole year.

  2. Observation of exclusive electron-positron production in hadron-hadron collisions.

    Science.gov (United States)

    Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Ambrose, D; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arguin, J-F; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Bedeschi, F; Behari, S; Belforte, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Budroni, S; Burkett, K; Busetto, G; Bussey, P; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carillo, S; Carlsmith, D; Caron, B; Carosi, R; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciljak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Almenar, C Cuenca; Cuevas, J; Culbertson, R; Cully, J C; Cyr, D; Daronco, S; D'Auria, S; Davies, T; D'Onofrio, M; Dagenhart, D; de Barbaro, P; Cecco, S De; Deisher, A; Lentdecker, G De; Dell'orso, M; Paoli, F Delli; Demortier, L; Deng, J; Deninno, M; Pedis, D De; Derwent, P F; Giovanni, G P Di; Dionisi, C; Ruzza, B Di; Dittmann, J R; Dituro, P; Dörr, C; Donati, S; Donega, M; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Foland, A; Forrester, S; Foster, G W; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garberson, F; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, A; Gibson, K; Gimmell, J L; Ginsburg, C; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Griffiths, M; Grinstein, S; Grosso-Pilcher, C; Grundler, U; da Costa, J Guimaraes; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ishizawa, Y; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jensen, H; Jeon, E J; Jindariani, S; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kovalev, A; Kraan, A C; Kraus, J; Kravchenko, I; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; Lecompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Loverre, P; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; Macqueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Manca, G; Margaroli, F; Marginean, R; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Maruyama, T; Mastrandrea, P; Masubuchi, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyamoto, A; Moed, S; Moggi, N; Mohr, B; Moore, R; Morello, M; Fernandez, P Movilla; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Nachtman, J; Nagano, A; Naganoma, J; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nigmanov, T; Nodulman, L; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Papadimitriou, V; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pinfold, J; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ranjan, N; Rappoccio, S; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Sabik, S; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Saltzberg, D; Sánchez, C; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Sjolin, J; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; Denis, R St; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Takikawa, K; Tanaka, M; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuchiya, R; Tsuno, S; Turini, N; Ukegawa, F; Unverhau, T; Uozumi, S; Usynin, D; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vázquez, F; Velev, G; Veramendi, G; Veszpremi, V; Vidal, R; Vila, I; Vilar, R; Vine, T; Vollrath, I; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, J; Wagner, W; Wallny, R; Wang, S M; Warburton, A; Waschke, S; Waters, D; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zhou, J; Zucchelli, S

    2007-03-16

    We present the first observation of exclusive e(+)e(-) production in hadron-hadron collisions, using pp[over] collision data at (square root) s = 1.96 TeV taken by the run II Collider Detector at Fermilab, and corresponding to an integrated luminosity of 532 pb(-1). We require the absence of any particle signatures in the detector except for an electron and a positron candidate, each with transverse energy E(T) > 5 GeV and pseudorapidity |eta| p + e(+)e(-) + p[over] through two-photon exchange. The measured cross section is 1.6(-0.3)(+0.5)(stat) +/- 0.3(syst) pb. This agrees with the theoretical prediction of 1.71+/-0.01 pb.

  3. Production of heavy neutral MSSM Higgs boson in photon-electron colliders

    International Nuclear Information System (INIS)

    Mahmoud, I.S.H.

    2004-01-01

    The production of heavy neutral Higgs boson has been studied through all the possible three out states processes by using the minimal supersymmetric standard model (MSSM) in the photon - electron colliders. The Feynman diagrams have been drawing for each possible mode of the interaction. The total cross section as a function of center of mass energy has been calculated for each process. It has been found that, the most dominant process occurs when the heavy neutral Higgs boson (Hο) produces with e-neutrino (v e ) and the negative charged Higgs boson (H - ) at centre of mass energy -√s≡ 1430 GeV at a value of the order ≅ 1.0 x 10 -4 pbarn

  4. Review of highly charged heavy ion production with electron cyclotron resonance ion source (invited)

    International Nuclear Information System (INIS)

    Nakagawa, T.

    2014-01-01

    The electron cyclotron resonance ion source (ECRIS) plays an important role in the advancement of heavy ion accelerators and other ion beam applications worldwide, thanks to its remarkable ability to produce a great variety of intense highly charged heavy ion beams. Great efforts over the past decade have led to significant ECRIS performance improvements in both the beam intensity and quality. A number of high-performance ECRISs have been built and are in daily operation or are under construction to meet the continuously increasing demand. In addition, comprehension of the detailed and complex physical processes in high-charge-state ECR plasmas has been enhanced experimentally and theoretically. This review covers and discusses the key components, leading-edge developments, and enhanced ECRIS performance in the production of highly charged heavy ion beams

  5. Electron beam processing in wire and cables and heat shrinkable products

    International Nuclear Information System (INIS)

    Tikku, V.K.

    2001-01-01

    In this paper in a general manner the commercially successful E-beam crosslinking in wire and cable and heat shrinkable products being manufactured first time in India are illustrated. We at NICCO in India have established first industrial electron accelerator of 150 kW power with 3 MeV beam energy and 50 mA beam current, near Calcutta; the facility is likely to be commissioned by January, 2002. This facility was conceived and the developmental work was carried out with the active support of our R and D partners at Rubber Technology Centre, IIT, Kharagpur and Bhabha Atomic Research Centre, Mumbai. The polymeric compound developments, its extrusion on to the cable samples and radiation crosslinking were successfully achieved in this joint R and D efforts. We have already executed the developmental order with the know-how developed indigenously with our research partners and using the 2 MeV electron accelerator facility at Bhabha Atomic Research Centre, Mumbai. (author)

  6. Production of high power microwaves for particle acceleration with an FEL bunched electron beam

    CERN Document Server

    Gardelle, J; Marchese, G; Padois, M; Rullier, J L; Donohue, J T

    1999-01-01

    Among the studies in the framework of high gradient linear electron-positron collider research, the Two-Beam Accelerator (TBA) is a very promising concept, and two projects are in progress, the Compact Linear Collider project at CERN (W. Schnell, Report no. CERN SL/92-51 and CLIC note 184; K. Huebner, CERN/PS 92-43, CLIC note 176; S. Van der Meer, CERN/PS 89-50, CLIC note 97.) and the Relativistic Klystron-TBA project at LBNL (Technical Review Committee, International Linear Collider Technical Review Committee Report 1995, SLAC-R-95-471, 1995). In a TBA an extremely intense low-energy electron beam, called the drive beam, is bunched at the desired operating frequency, and upon passing through resonant cavities generates radio-frequency power for accelerating the main beam. Among the different approaches to the production of a suitable drive beam, the use of an FEL has been proposed and is under active study at CEA/CESTA.

  7. Measurement of the left-right asymmetry in Z boson production by electron-positron collisions

    International Nuclear Information System (INIS)

    Elia, R.D.

    1994-04-01

    We present the first measurement of the left-right cross-section asymmetry (A LR ) in Z boson production at the SLAC Linear Collider. The left-right asymmetry provides a direct measurement of the e - -Z coupling and thus of the effective weak mixing angle; in addition, A LR is sensitive to the unknown top-quark and Higgs-boson masses. In 1992 the SLD detector recorded 10224 Z events produced by the collision of longitudinally polarized electrons with an unpolarized positron beam at a center-of-mass energy of 91.55 GeV. The average electron beam polarization during the run was (22.4 ± 0.6)%. We measure A LR to be 0.101 ± 0.044 (stat.) ± 0.004 (syst.), which determines the effective weak mixing angle to be sin 2 θeff/W = 0.2377 ± 0.0056 (stat.) ± 0.0005 (syst.). This measurement of A LR is in agreement with comparable measurements and is consistent with Standard-Model predictions for allowed top and Higgs masses

  8. Study of electron pair production in hadron and nuclear collisions at the CERN SPS

    CERN Multimedia

    Liebold, H-P; Sako, H; Belaga, V; Bielcikova, J; Stachel, J

    2002-01-01

    The NA45/CERES experiment investigates primarily the production of electron-positron pairs and of direct photons in proton-nucleus and nucleus-nucleus collisions. For electron-positron pairs the experiment studies the continuum in the mass region of about 0.05 to 2 GeV/c$^2$ and the vector mesons $\\varrho ,~ \\omega$, and, $\\phi$. Since for electromagnetic probes final state interactions are practically negligible these observables are unique for studying the evolution and dynamics of ultrarelativistic heavy-ion collisions from the hot and dense early stage where a quark-gluon plasma is expected to be formed to the final freeze-out stage when hadrons decouple.\\\\ \\\\ The experiment also studies the spectral distributions of charged particles, their distribution relative to the reaction plane, and identified high momentum pions. Another topic of investigation are QED pairs produced in peripheral nuclear collisions.\\\\ \\\\ The first phase of the experiment, NA45, has been concluded with two main results: i) There is...

  9. Slow positron beam production by a 14 MeV C.W. electron accelerator

    Science.gov (United States)

    Begemann, M.; Gräff, G.; Herminghaus, H.; Kalinowsky, H.; Ley, R.

    1982-10-01

    A 14 MeV c.w. electron accelerator is used for pair production in a tungsten target of 0.7 radiation lengths thickness. A small fraction of the positrons is thermalized and diffuses out of the surface ofsurface of a well annealed tungsten foil coated with MgO which is positioned immediately behind the target. The slow positrons are extracted from the target region and magnetically guided over a distance of 10 m onto a channelplate multiplier at the end of an S-shaped solenoid. The positrons are identified by their annihilation radiation using two NaI-detectors. The intensity of the slow positrons is proportional to the accelerator electron beam current. The maximum intensity of 2.2 × 10 5 slow positrons per second reaching thedetector at an accelerator current of 15 μA was limited by the power deposited in the uncooled target. The energy of the positrons is concentrated in a small region at about 1 eV and clearly demonstrates the emission of thermal positrons.

  10. Slow positron beam production by a 14 MeV c.w. electron accelerator

    International Nuclear Information System (INIS)

    Begemann, M.; Graeff, G.; Herminghaus, H.; Kalinowsky, H.; Ley, R.

    1982-01-01

    A 14 MeV c.w. electron accelerator is used for pair production in a tungsten target of 0.7 radiation lengths thickness. A small fraction of the positrons is thermalized and diffuses out of the surface of a well annealed tungsten foil coated with MgO which is positioned immediately behind the target. The slow positrons are extracted from the target region and magnetically guided over a distance of 10 m onto a channelplate multiplier at the end of an S-shaped solenoid. The positrons are identified by their annihilation radiation using two Nal-detectors. The intensity of the slow positrons is proportional to the accelerator electron beam current. The maximum intensity of 2.2 x 10 5 slow positrons per second reaching the detector at an accelerator current of 15 μA was limited by the power deposited in the uncooled target. The energy of the positrons is concentrated in a small region at about 1 eV and clearly demonstrates the emission of thermal positrons. (orig.)

  11. Production of highly charged ion beams from electron cyclotron resonance ion sources (invited)

    International Nuclear Information System (INIS)

    Xie, Z.Q.

    1998-01-01

    Electron cyclotron resonance ion source (ECRIS) development has progressed with multiple-frequency plasma heating, higher mirror magnetic fields, and better technique to provide extra cold electrons. Such techniques greatly enhance the production of highly charged ions from ECRISs. So far at continuous wave (CW) mode operation, up to 300 eμA of O 7+ and 1.15 emA of O 6+ , more than 100 eμA of intermediate heavy ions for charge states up to Ar 13+ , Ca 13+ , Fe 13+ , Co 14+ , and Kr 18+ , and tens of eμA of heavy ions with charge states to Kr 26+ , Xe 28+ , Au 35+ , Bi 34+ , and U 34+ were produced from ECRISs. At an intensity of at least 1 eμA, the maximum charge state available for the heavy ions are Xe 36+ , Au 46+ , Bi 47+ , and U 48+ . An order of magnitude enhancement for fully stripped argon ions (I≥60enA) were also achieved. This article will review the ECR ion source progress and discuss key requirement for ECRISs to produce the highly charged ion beams. copyright 1998 American Institute of Physics

  12. Electronic Cigarette Marketing Online: a Multi-Site, Multi-Product Comparison.

    Science.gov (United States)

    Chu, Kar-Hai; Sidhu, Anupreet K; Valente, Thomas W

    2015-01-01

    Electronic cigarette awareness and use has been increasing rapidly. E-cigarette brands have utilized social networking sites to promote their products, as the growth of the e-cigarette industry has paralleled that of Web 2.0. These online platforms are cost-effective and have unique technological features and user demographics that can be attractive for selective marketing. The popularity of multiple sites also poses a risk of exposure to social networks where e-cigarette brands might not have a presence. To examine the marketing strategies of leading e-cigarette brands on multiple social networking sites, and to identify how affordances of the digital media are used to their advantage. Secondary analyses include determining if any brands are benefitting from site demographics, and exploring cross-site diffusion of marketing content through multi-site users. We collected data from two e-cigarette brands from four social networking sites over approximately 2.5 years. Content analysis is used to search for themes, population targeting, marketing strategies, and cross-site spread of messages. Twitter appeared to be the most frequently used social networking site for interacting directly with product users. Facebook supported informational broadcasts, such as announcements regarding political legislation. E-cigarette brands also differed in their approaches to their users, from informal conversations to direct product marketing. E-cigarette makers use different strategies to market their product and engage their users. There was no evidence of direct targeting of vulnerable populations, but the affordances of the different sites are exploited to best broadcast context-specific messages. We developed a viable method to study cross-site diffusion, although additional refinement is needed to account for how different types of digital media are used.

  13. Intense highly charged ion beam production and operation with a superconducting electron cyclotron resonance ion source

    Directory of Open Access Journals (Sweden)

    H. W. Zhao

    2017-09-01

    Full Text Available The superconducting electron cyclotron resonance ion source with advanced design in Lanzhou (SECRAL is a superconducting-magnet-based electron cyclotron resonance ion source (ECRIS for the production of intense highly charged heavy ion beams. It is one of the best performing ECRISs worldwide and the first superconducting ECRIS built with an innovative magnet to generate a high strength minimum-B field for operation with heating microwaves up to 24–28 GHz. Since its commissioning in 2005, SECRAL has so far produced a good number of continuous wave intensity records of highly charged ion beams, in which recently the beam intensities of ^{40}Ar^{12+} and ^{129}Xe^{26+} have, for the first time, exceeded 1 emA produced by an ion source. Routine operations commenced in 2007 with the Heavy Ion accelerator Research Facility in Lanzhou (HIRFL, China. Up to June 2017, SECRAL has been providing more than 28,000 hours of highly charged heavy ion beams to the accelerator demonstrating its great capability and reliability. The great achievement of SECRAL is accumulation of numerous technical advancements, such as an innovative magnetic system and an efficient double-frequency (24+18  GHz heating with improved plasma stability. This article reviews the development of SECRAL and production of intense highly charged ion beams by SECRAL focusing on its unique magnet design, source commissioning, performance studies and enhancements, beam quality and long-term operation. SECRAL development and its performance studies representatively reflect the achievements and status of the present ECR ion source, as well as the ECRIS impacts on HIRFL.

  14. Intense highly charged ion beam production and operation with a superconducting electron cyclotron resonance ion source

    Science.gov (United States)

    Zhao, H. W.; Sun, L. T.; Guo, J. W.; Lu, W.; Xie, D. Z.; Hitz, D.; Zhang, X. Z.; Yang, Y.

    2017-09-01

    The superconducting electron cyclotron resonance ion source with advanced design in Lanzhou (SECRAL) is a superconducting-magnet-based electron cyclotron resonance ion source (ECRIS) for the production of intense highly charged heavy ion beams. It is one of the best performing ECRISs worldwide and the first superconducting ECRIS built with an innovative magnet to generate a high strength minimum-B field for operation with heating microwaves up to 24-28 GHz. Since its commissioning in 2005, SECRAL has so far produced a good number of continuous wave intensity records of highly charged ion beams, in which recently the beam intensities of 40Ar+ and 129Xe26+ have, for the first time, exceeded 1 emA produced by an ion source. Routine operations commenced in 2007 with the Heavy Ion accelerator Research Facility in Lanzhou (HIRFL), China. Up to June 2017, SECRAL has been providing more than 28,000 hours of highly charged heavy ion beams to the accelerator demonstrating its great capability and reliability. The great achievement of SECRAL is accumulation of numerous technical advancements, such as an innovative magnetic system and an efficient double-frequency (24 +18 GHz ) heating with improved plasma stability. This article reviews the development of SECRAL and production of intense highly charged ion beams by SECRAL focusing on its unique magnet design, source commissioning, performance studies and enhancements, beam quality and long-term operation. SECRAL development and its performance studies representatively reflect the achievements and status of the present ECR ion source, as well as the ECRIS impacts on HIRFL.

  15. Evaluation of novel SNPs and haplotypes within the ATBF1 gene and their effects on economically important production traits in cattle

    Directory of Open Access Journals (Sweden)

    H. Xu

    2017-08-01

    Full Text Available AT motif binding factor 1 (ATBF1 gene can promote the expression level of the growth hormone 1 (GH1 gene by binding to the enhancers of the POU1F1 and PROP1 genes; thus, it affects the growth and development of livestock. Considering that the ATBF1 gene also has a close relationship with the Janus kinase–signal transductor and activator of transcription (JAK–STAT pathway, the objective of this work was to identify novel single-nucleotide polymorphism (SNP variations and their association with growth traits in native Chinese cattle breeds. Five novel SNPs within the ATBF1 gene were found in 644 Qinchuan and Jinnan cattle for first time using 25 pairs of screening and genotyping primers. The five novel SNPs were named as AC_000175:g.140344C>G (SNP1, g.146573T>C (SNP2, g.205468C>T (SNP3, g.205575A>G (SNP4 and g.297690Ctraits in Jinnan cattle. SNP3 was found to have significant associations with four growth traits in Qinchuan cattle. Moreover, the different combined genotypes, SNP1–SNP3, SNP1–SNP4 and SNP2–SNP5 were significantly associated with the growth traits in cattle. These findings indicated that the bovine ATBF1 gene had marked effects on growth traits, and the growth-trait-related loci can be used as DNA markers for maker-assisted selection (MAS breeding programs in cattle.

  16. Multiple tobacco product use among adults in the United States: cigarettes, cigars, electronic cigarettes, hookah, smokeless tobacco, and snus.

    Science.gov (United States)

    Lee, Youn O; Hebert, Christine J; Nonnemaker, James M; Kim, Annice E

    2014-05-01

    Noncigarette tobacco products are increasingly popular. Researchers need to understand multiple tobacco product use to assess the effects of these products on population health. We estimate national prevalence and examine risk factors for multiple product use. We calculated prevalence estimates of current use patterns involving cigarettes, cigars, electronic cigarettes, hookah, smokeless tobacco, and snus using data from the 2012 RTI National Adult Tobacco Survey (N=3627), a random-digit-dial telephone survey of adults aged 18 and over. Associations between use patterns (exclusive single product and multiple products) and demographic characteristics were examined using Pearson chi-square tests and logistic regression. 32.1% of adults currently use 1 or more tobacco products; 14.9% use cigarettes exclusively, and 6.6% use one noncigarette product exclusively, 6.9% use cigarettes with another product (dual use), 1.3% use two noncigarette products, and 2.4% use three or more products (polytobacco use). Smokers who are young adult, male, never married, reside in the West, and made prior quit attempts were at risk for multiple product use. Over 10% of U.S. adults use multiple tobacco products. A better understanding of multiple product use involving combustible products, like cigars and hookah, is needed. Multiple product use may be associated with past quit attempts. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Perceived harm, addictiveness, and social acceptability of tobacco products and marijuana among young adults: marijuana, hookah, and electronic cigarettes win.

    Science.gov (United States)

    Berg, Carla J; Stratton, Erin; Schauer, Gillian L; Lewis, Michael; Wang, Yanwen; Windle, Michael; Kegler, Michelle

    2015-01-01

    There has been an increase in non-daily smoking, alternative tobacco product and marijuana use among young adults in recent years. This study examined perceptions of health risks, addictiveness, and social acceptability of cigarettes, cigar products, smokeless tobacco, hookah, electronic cigarettes, and marijuana among young adults and correlates of such perceptions. In Spring 2013, 10,000 students at two universities in the Southeastern United States were recruited to complete an online survey (2,002 respondents), assessing personal, parental, and peer use of each product; and perceptions of health risks, addictiveness, and social acceptability of each of these products. Marijuana was the most commonly used product in the past month (19.2%), with hookah being the second most commonly used (16.4%). The least commonly used were smokeless tobacco products (2.6%) and electronic cigarettes (4.5%). There were high rates of concurrent product use, particularly among electronic cigarette users. The most positively perceived was marijuana, with hookah and electronic cigarettes being second. While tobacco use and related social factors, related positively, influenced perceptions of marijuana, marijuana use and related social factors were not associated with perceptions of any tobacco product. Conclusions/Importance: Marketing efforts to promote electronic cigarettes and hookah to be safe and socially acceptable seem to be effective, while policy changes seem to be altering perceptions of marijuana and related social norms. Research is needed to document the health risks and addictive nature of emerging tobacco products and marijuana and evaluate efforts to communicate such risks to youth.

  18. Production of medical radioactive isotopes using KIPT electron driven subcritical facility

    International Nuclear Information System (INIS)

    Talamo, Alberto; Gohar, Yousry

    2008-01-01

    Kharkov Institute of Physics and Technology (KIPT) of Ukraine in collaboration with Argonne National Laboratory (ANL) has a plan to construct an electron accelerator driven subcritical assembly. One of the facility objectives is the production of medical radioactive isotopes. This paper presents the ANL collaborative work performed for characterizing the facility performance for producing medical radioactive isotopes. First, a preliminary assessment was performed without including the self-shielding effect of the irradiated samples. Then, more detailed investigation was carried out including the self-shielding effect, which defined the sample size and location for producing each medical isotope. In the first part, the reaction rates were calculated as the multiplication of the cross section with the unperturbed neutron flux of the facility. Over fifty isotopes have been considered and all transmutation channels are used including (n, γ), (n, 2n), (n, p), and (γ, n). In the second part, the parent isotopes with high reaction rate were explicitly modeled in the calculations. Four irradiation locations were considered in the analyses to study the medical isotope production rate. The results show the self-shielding effect not only reduces the specific activity but it also changes the irradiation location that maximizes the specific activity. The axial and radial distributions of the parent capture rates have been examined to define the irradiation sample size of each parent isotope

  19. Production of medical radioactive isotopes using KIPT electron driven subcritical facility

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto [Nuclear Engineering Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States)], E-mail: alby@anl.gov; Gohar, Yousry [Nuclear Engineering Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States)

    2008-05-15

    Kharkov Institute of Physics and Technology (KIPT) of Ukraine in collaboration with Argonne National Laboratory (ANL) has a plan to construct an electron accelerator driven subcritical assembly. One of the facility objectives is the production of medical radioactive isotopes. This paper presents the ANL collaborative work performed for characterizing the facility performance for producing medical radioactive isotopes. First, a preliminary assessment was performed without including the self-shielding effect of the irradiated samples. Then, more detailed investigation was carried out including the self-shielding effect, which defined the sample size and location for producing each medical isotope. In the first part, the reaction rates were calculated as the multiplication of the cross section with the unperturbed neutron flux of the facility. Over fifty isotopes have been considered and all transmutation channels are used including (n, {gamma}), (n, 2n), (n, p), and ({gamma}, n). In the second part, the parent isotopes with high reaction rate were explicitly modeled in the calculations. Four irradiation locations were considered in the analyses to study the medical isotope production rate. The results show the self-shielding effect not only reduces the specific activity but it also changes the irradiation location that maximizes the specific activity. The axial and radial distributions of the parent capture rates have been examined to define the irradiation sample size of each parent isotope.

  20. Production of medical radioactive isotopes using KIPT electron driven subcritical facility.

    Science.gov (United States)

    Talamo, Alberto; Gohar, Yousry

    2008-05-01

    Kharkov Institute of Physics and Technology (KIPT) of Ukraine in collaboration with Argonne National Laboratory (ANL) has a plan to construct an electron accelerator driven subcritical assembly. One of the facility objectives is the production of medical radioactive isotopes. This paper presents the ANL collaborative work performed for characterizing the facility performance for producing medical radioactive isotopes. First, a preliminary assessment was performed without including the self-shielding effect of the irradiated samples. Then, more detailed investigation was carried out including the self-shielding effect, which defined the sample size and location for producing each medical isotope. In the first part, the reaction rates were calculated as the multiplication of the cross section with the unperturbed neutron flux of the facility. Over fifty isotopes have been considered and all transmutation channels are used including (n, gamma), (n, 2n), (n, p), and (gamma, n). In the second part, the parent isotopes with high reaction rate were explicitly modeled in the calculations. Four irradiation locations were considered in the analyses to study the medical isotope production rate. The results show the self-shielding effect not only reduces the specific activity but it also changes the irradiation location that maximizes the specific activity. The axial and radial distributions of the parent capture rates have been examined to define the irradiation sample size of each parent isotope.

  1. Electronic health record impact on productivity and efficiency in an academic pediatric ophthalmology practice.

    Science.gov (United States)

    Redd, Travis K; Read-Brown, Sarah; Choi, Dongseok; Yackel, Thomas R; Tu, Daniel C; Chiang, Michael F

    2014-12-01

    To measure the effect of electronic health record (EHR) implementation on productivity and efficiency in the pediatric ophthalmology division at an academic medical center. Four established providers were selected from the pediatric ophthalmology division at the Oregon Health & Science University Casey Eye Institute. Clinical volume was compared before and after EHR implementation for each provider. Time elapsed from chart open to completion (OTC time) and the proportion of charts completed during business hours were monitored for 3 years following implementation. Overall there was an 11% decrease in clinical volume following EHR implementation, which was not statistically significant (P = 0.18). The mean OTC time ranged from 5.5 to 28.3 hours among providers in this study, and trends over time were variable among the four providers. Forty-four percent of all charts were closed outside normal business hours (30% on weekdays, 14% on weekends). EHR implementation was associated with a negative impact on productivity and efficiency in our pediatric ophthalmology division. Copyright © 2014 American Association for Pediatric Ophthalmology and Strabismus. Published by Elsevier Inc. All rights reserved.

  2. Realisation of a linear electron accelerator. Application to the production of millimetre wavelength waves; Realisation d'un accelerateur lineaire d'electrons. Application a la production d'ondes millimetriques

    Energy Technology Data Exchange (ETDEWEB)

    Combe, Rene

    1956-06-27

    In the first part of this research thesis, the author reports the development of a linear electron accelerator with a presentation of charged waveguides which are their main components. He also proposes a recall of the charged waveguide theory, an overview of some experimental guides, a description of the calculation method, and reports the actual realisation of the accelerator waveguide. The apparatus is precisely described, and results obtained during tests are presented. The second part of the thesis addresses the study of millimetre wavelength waves. It reports the study of the electron movement in a sinusoidal inverter, and in a helical inverter (a solenoid in which the electron has a helical trajectory). Then, the author proposes a detailed presentation of electron radiation theory: fundamental wavelength, total radiated power, angular and spectral distribution of radiation. The author finally reports a comparison between radiations obtained with different devices [French] La premiere partie de ce memoire traite precisement de l'etude et de la construction de notre accelerateur lineaire d'electrons, le chapitre I etant consacre aux fluides d'ondes charges, qui en constituent l'element essentiel. Apres un rappel de la theorie de ces guides, on expose quelques contributions theoriques, on etudie un certain nombre de guides experimentaux, et on decrit la methode de calcul et la realisation du guide de l'accelerateur. Le chapitre II renferme la description de l'appareil et l'expose des resultats obtenus lors de ses essais. La deuxieme partie: recherches sur les ondes millimetriques, commence (chapitre III) par l'etude du mouvement de l'electron dans un ondulateur sinusoidal, ou dans un ondulateur helicoidal, solenoide, dans lequel l'electron decrit une trajectoire en helice: nous etudions concurremment les deux dispositifs. Le chapitre IV contient la theorie detaillee du rayonnement de l'electron: longueur d'onde fondamentale, puissance totale rayonnee

  3. Risk attitudes and personality traits predict perceptions of benefits and risks for medicinal products: a field study of European medical assessors.

    Science.gov (United States)

    Beyer, Andrea R; Fasolo, Barbara; de Graeff, P A; Hillege, H L

    2015-01-01

    Risk attitudes and personality traits are known predictors of decision making among laypersons, but very little is known of their influence among experts participating in organizational decision making. Seventy-five European medical assessors were assessed in a field study using the Domain Specific Risk Taking scale and the Big Five Inventory scale. Assessors rated the risks and benefits for a mock "clinical dossier" specific to their area of expertise, and ordinal regression models were used to assess the odds of risk attitude or personality traits in predicting either the benefit or the risk ratings. An increase in the "conscientiousness" score predicted an increase in the perception of the drug's benefit, and male assessors gave higher scores for the drug's benefit ratings than did female assessors. Extraverted assessors saw fewer risks, and assessors with a perceived neutral-averse or averse risk profile saw greater risks. Medical assessors perceive the benefits and risks of medicines via a complex interplay of the medical situation, their personality traits and even their gender. Further research in this area is needed to determine how these potential biases are managed within the regulatory setting. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  4. Di-pion and di-electron production in quasi-free np reactions with HADES

    International Nuclear Information System (INIS)

    Kuc, Hubert

    2014-01-01

    In this thesis, the exclusive di-pion and di-electron production channels in quasi-free n + p interactions at about E k = 1.25 GeV/u were presented. First the exclusive dπ + π - channel and new deuteron selection method named coplanarity have been discussed. Next, applying this new procedure to the existing inclusive e + e - results, the exclusive de + e - channel has been investigated. In general, analysis of the channels with deuteron in final state with HADES spectrometer are technical challenge due to d angular distributions. Presented results are divided to the two scenarios: in the rst case, the deuteron is detected in HADES and in the second case, it is detected in the FW detector. The two cases correspond to two very different kinematical situations, corresponding respectively to deuteron angles larger than 15 and smaller than 7 deg. In case of the deuteron detected inside HADES tracking system, the reaction phase-space is very limited however the data quality is very good. On the other hand, in case of detecting deuteron in Forward Wall detector the count rates are much bigger but the event selection requires much bigger effort and acquired data have much worse quality. The main goal of the quasi-free np → dπ + π - exclusive channel studies was to complement the studies of the π + π - production processes (i.e. double Δ(1232), N(1440), N(1520) excitations) which are performed with np → npπ + π - and pp → ppπ + π - analysis within HADES collaboration. Furthermore, recent WASA collaboration results indicated a big enhancement in ππ yield due to new di-baryon resonance. The HADES results in details described in sec. 4, indeed shows that conventional sources fail to reproduce both the ππ yield and the shape of the spectra within HADES acceptance. Our results are consistent with the WASA observations. On the other hand, presented results are not sensitive enough to give a satisfying proof for the di-baryon resonance existence. However, the

  5. X-ray induced production and yield kinetics of photo- and Auger Electrons in semiconductors

    International Nuclear Information System (INIS)

    Peregudov, V.I.; Pashaev, Eh.M.

    1991-01-01

    The paper is dedicated to theoretical and experimental analysis of the mechanism of indirect excitation of soft Auger-electrons due to atom electron ionization using Ge crystal exposed to MoK α radiation as an example. Process of generation of these Auger-electrons is considered in detail, solution of kinetic equation for electrons, as well as, experimental data proving crucial role of indirect processes in generation of soft Auger-electrons are given

  6. Neutron production in the interaction of electrons with a dispersing lamella; Produccion de neutrones en la interaccion de electrones con una laminilla dispersora

    Energy Technology Data Exchange (ETDEWEB)

    Soto B, T. G.; Baltazar R, A.; Medina C, D.; Vega C, H. R., E-mail: tzinnia.soto@gmail.com [Universidad Autonoma de Zacatecas, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas, Zac. (Mexico)

    2017-10-15

    When a Linac for radiotherapy operates with acceleration voltages greater than 8 MV, neutrons are produced as secondary radiation. They deposit an undesirable and not negligible dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, cancer treatment with a Linac is done with photon or electron beams, which produce neutrons through reactions (γ, n) and e, e n) respectively. Because the effective section of the reaction (n, γ) is 137 times greater than the reaction (e, e n), most studies have focused on photo neutrons. When a Linac operates with electron beams, the beam that leaves the magnetic baffle is incised in the dispersion foil in order to cause quasi-elastic interactions and expand the spatial distribution of the electrons; in their interaction with the lamella the electrons produce photons and these in turn produce neutrons. Due to the radiobiological efficiency of neutrons and the ways in which they interact with matter, is important to determine the neutrons production in Linacs operating in electron mode. The objective of this work is to determine the characteristics of photons and neutrons that occur when a beam of mono-energetic electrons of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm thick located in the center of a 10 cm thick tungsten shell, used to represent the accelerator head. The study was carried out using the Monte Carlo method with the MCNP6 code for electron beams of 12 and 18 MeV. The spectra of photons and neutrons were estimated in 6 point detectors, four were placed in different points equidistant from the center of the lamella and the other two were located at 50 cm and 1 m from the electron beam, simulating the totally closed head. In this work it was found that when a Linac operates with an electron beam of 12 or 18 MeV there is neutron production mainly in the head and in the direction of the beam. (Author)

  7. Association of Electronic Cigarette Use With Initiation of Combustible Tobacco Product Smoking in Early Adolescence.

    Science.gov (United States)

    Leventhal, Adam M; Strong, David R; Kirkpatrick, Matthew G; Unger, Jennifer B; Sussman, Steve; Riggs, Nathaniel R; Stone, Matthew D; Khoddam, Rubin; Samet, Jonathan M; Audrain-McGovern, Janet

    2015-08-18

    Exposure to nicotine in electronic cigarettes (e-cigarettes) is becoming increasingly common among adolescents who report never having smoked combustible tobacco. To evaluate whether e-cigarette use among 14-year-old adolescents who have never tried combustible tobacco is associated with risk of initiating use of 3 combustible tobacco products (ie, cigarettes, cigars, and hookah). Longitudinal repeated assessment of a school-based cohort at baseline (fall 2013, 9th grade, mean age = 14.1 years) and at a 6-month follow-up (spring 2014, 9th grade) and a 12-month follow-up (fall 2014, 10th grade). Ten public high schools in Los Angeles, California, were recruited through convenience sampling. Participants were students who reported never using combustible tobacco at baseline and completed follow-up assessments at 6 or 12 months (N = 2530). At each time point, students completed self-report surveys during in-classroom data collections. Student self-report of whether he or she ever used e-cigarettes (yes or no) at baseline. Six- and 12-month follow-up reports on use of any of the following tobacco products within the prior 6 months: (1) any combustible tobacco product (yes or no); (2) combustible cigarettes (yes or no), (3) cigars (yes or no); (4) hookah (yes or no); and (5) number of combustible tobacco products (range: 0-3). Past 6-month use of any combustible tobacco product was more frequent in baseline e-cigarette ever users (n = 222) than never users (n = 2308) at the 6-month follow-up (30.7% vs 8.1%, respectively; difference between groups in prevalence rates, 22.7% [95% CI, 16.4%-28.9%]) and at the 12-month follow-up (25.2% vs 9.3%, respectively; difference between groups, 15.9% [95% CI, 10.0%-21.8%]). Baseline e-cigarette use was associated with greater likelihood of use of any combustible tobacco product averaged across the 2 follow-up periods in the unadjusted analyses (odds ratio [OR], 4.27 [95% CI, 3.19-5.71]) and in the analyses adjusted

  8. Experimental studies on the production and suppression mechanism of the hot electrons produced by short wavelength laser

    International Nuclear Information System (INIS)

    Qi Lanying; Jiang Xiaohua; Zhao Xuewei; Li Sanwei; Zhang Wenhai; Li Chaoguang; Zheng Zhijian; Ding Yongkun

    1999-12-01

    The experiments on gold-disk and hohlraum and plastic hydrocarbon (CH) film targets irradiated by laser beams with wavelength 0.35 μm (Xingguang-II) and 0.53 μm (Shenguang-I) are performed. The characteristics of hot electrons are commonly deduced from spectrum of hard X-ray. Associated with the measurement of backward SRS and 3/2ω 0 , the production mechanism of hot electrons for different target type is analyzed in laser plasma with shorter wavelength. A effective way to suppress hot electrons has been found

  9. A Novel Method for the Discrimination of Semen Arecae and Its Processed Products by Using Computer Vision, Electronic Nose, and Electronic Tongue

    Directory of Open Access Journals (Sweden)

    Min Xu

    2015-01-01

    Full Text Available Areca nut, commonly known locally as Semen Arecae (SA in China, has been used as an important Chinese herbal medicine for thousands of years. The raw SA (RAW is commonly processed by stir-baking to yellow (SBY, stir-baking to dark brown (SBD, and stir-baking to carbon dark (SBC for different clinical uses. In our present investigation, intelligent sensory technologies consisting of computer vision (CV, electronic nose (E-nose, and electronic tongue (E-tongue were employed in order to develop a novel and accurate method for discrimination of SA and its processed products. Firstly, the color parameters and electronic sensory responses of E-nose and E-tongue of the samples were determined, respectively. Then, indicative components including 5-hydroxymethyl furfural (5-HMF and arecoline (ARE were determined by HPLC. Finally, principal component analysis (PCA and discriminant factor analysis (DFA were performed. The results demonstrated that these three instruments can effectively discriminate SA and its processed products. 5-HMF and ARE can reflect the stir-baking degree of SA. Interestingly, the two components showed close correlations to the color parameters and sensory responses of E-nose and E-tongue. In conclusion, this novel method based on CV, E-nose, and E-tongue can be successfully used to discriminate SA and its processed products.

  10. Neutrons production during the interaction of monoenergetic electrons with a thin tungsten target; Produccion de neutrones durante la interaccion de electrones monoenergeticos con un blanco delgado de tungsteno

    Energy Technology Data Exchange (ETDEWEB)

    Soto B, T. G.; Medina C, D. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Programa de Doctorado en Ciencias Basicas, 98068 Zacatecas, Zac. (Mexico); Baltazar R, A. [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica, Programa de Doctorado en Ingenieria y Tecnologia Aplicada, 98068 Zacatecas, Zac. (Mexico); Vega C, H. R., E-mail: tzinnia.soto@gmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2016-10-15

    When a linear accelerator for radiotherapy operates with acceleration voltages higher than 8 MV, neutrons are produced, as secondary radiation which deposits an undesirable and undesirable dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, the cancer treatment with a Linac is performed with photon or electron beams, which produce neutrons through reactions (γ, n) and (e, e n) respectively. Because the effective section for the neutrons production by reactions (γ, n) is approximately two orders of magnitude larger than the effective section of the reactions (e, e n), studies on the effects of this secondary radiation have focused on photo neutrons. en a Linac operates with electron beams, the beam coming out of the magnetic deflector is impinged on the dispersion lamella in order to cause quasi-elastic interactions and to expand the spatial distribution of the electrons; the objective of this work is to determine the characteristics of the photons and neutrons that occur when a mono-energetic electron beam of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm of thickness. The study was done using Monte Carlo methods with code MCNP6 for electron beams of 8, 10, 12, 15 and 18 MeV. The spectra of photons and neutrons were estimated in 4 point detectors placed at different equidistant points from the center of the lamella. (Author)

  11. Limits on the production of large transverse momentum direct photons deduced from the measurement of low-mass electron pairs

    International Nuclear Information System (INIS)

    Cobb, J.H.; Iwata, S.; Palmer, R.B.; Rahm, D.C.; Rehak, P.; Stumer, I.; Fabjan, C.W.; Fowler, E.; Mannelli, I.; Mouzourakis, P.; Nakamura, K.; Nappi, A.; Willis, W.J.; Goldberg, M.; Horwitz, N.; Moneti, G.C.; Lankford, A.J.; Kourkoumelis, C.

    1978-01-01

    The hadronic production of electron pairs with masses between 200 and 500 MeV and large transverse momentum has been measured at the CERN Intersecting Storage Rings (ISR). The expected relation between low-mass electron pairs and real photons is used to determine the direct hadronic production of photons. Contrary to indications from some previous experiments, the observed spectrum is consistent with expectations from the decay of known mesons, and leads to a value for the ratio of direct photons to π 0 of γ/π 0 =(0.55+-0.92)% for 2 = 55 GeV. (Auth.)

  12. Nicotine and Carbonyl Emissions From Popular Electronic Cigarette Products: Correlation to Liquid Composition and Design Characteristics.

    Science.gov (United States)

    El-Hellani, Ahmad; Salman, Rola; El-Hage, Rachel; Talih, Soha; Malek, Nathalie; Baalbaki, Rima; Karaoghlanian, Nareg; Nakkash, Rima; Shihadeh, Alan; Saliba, Najat A

    2018-01-05

    Available in hundreds of device designs and thousands of flavors, electronic cigarette (ECIG) may have differing toxicant emission characteristics. This study assesses nicotine and carbonyl yields in the most popular brands in the U.S. market. These products included disposable, prefilled cartridge, and tank-based ECIGs. Twenty-seven ECIG products of 10 brands were procured and their power outputs were measured. The e-liquids were characterized for pH, nicotine concentration, propylene glycol/vegetable glycerin (PG/VG) ratio, and water content. Aerosols were generated using a puffing machine and nicotine and carbonyls were, respectively, quantified using gas chromatograph and high-performance liquid chromatography. A multiregression model was used to interpret the data. Nicotine yields varied from 0.27 to 2.91 mg/15 puffs, a range corresponding to the nicotine yield of less than 1 to more than 3 combustible cigarettes. Nicotine yield was highly correlated with ECIG type and brand, liquid nicotine concentration, and PG/VG ratio, and to a lower significance with electrical power, but not with pH and water content. Carbonyls, including the carcinogen formaldehyde, were detected in all ECIG aerosols, with total carbonyl concentrations ranging from 3.72 to 48.85 µg/15 puffs. Unlike nicotine, carbonyl concentrations were mainly correlated with power. In 15 puffs, some ECIG devices emit nicotine quantities that exceed those of tobacco cigarettes. Nicotine emissions vary widely across products but carbonyl emissions showed little variations. In spite of that ECIG users are exposed to toxicologically significant levels of carbonyl compounds, especially formaldehyde. Regression analysis showed the importance of design and e-liquid characteristics as determinants of nicotine and carbonyl emissions. Periodic surveying of characteristics of ECIG products available in the marketplace is valuable for understanding population-wide changes in ECIG use patterns over time. © The

  13. Hydrogenation of organic matter as a terminal electron sink sustains high CO 2 :CH 4 production ratios during anaerobic decomposition

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Rachel M.; Tfaily, Malak M.; Rich, Virginia I.; Keller, Jason K.; Bridgham, Scott D.; Zalman, Cassandra Medvedeff; Meredith, Laura; Hanson, Paul J.; Hines, Mark; Pfeifer-Meister, Laurel; Saleska, Scott R.; Crill, Patrick; Cooper, William T.; Chanton, Jeff P.; Kostka, Joel E.

    2017-10-01

    Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO2 and CH4 for each molecule of organic matter degraded. However, CO2:CH4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO2 has an oxidation state of +4, if CH4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO2:CH4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. This mechanism for CO2 generation without concomitant CH4 production has the potential to regulate the global warming potential of peatlands by elevating CO2:CH4 production ratios.

  14. Vacuum Potentials for the Two Only Permanent Free Particles, Proton and Electron. Pair Productions

    International Nuclear Information System (INIS)

    Zheng-Johansson, J X

    2012-01-01

    The two only species of isolatable, smallest, or unit charges +e and −e present in nature interact with the universal vacuum in a polarisable dielectric representation through two uniquely defined vacuum potential functions. All of the non-composite subatomic particles containing one-unit charges, +e or −e, are therefore formed in terms of the IED model of the respective charges, of zero rest masses, oscillating in either of the two unique vacuum potential fields, together with the radiation waves of their own charges. In this paper we give a first principles treatment of the dynamics of charge in a dielectric vacuum, based on which, combined with solutions for the radiation waves obtained previously, we subsequently derive the vacuum potential function for a given charge q, which we show to be quadratic and consist each of quantised potential levels, giving therefore rise to quantised characteristic oscillation frequencies of the charge and accordingly quantised, sharply-defined masses of the IED particles. By further combining with relevant experimental properties as input information, we determine the IED particles built from the charges +e, −e at their first excited states in the respective vacuum potential wells to be the proton and the electron, the observationally two only stable (permanently lived) and 'free' particles containing one-unit charges. Their antiparticles as produced in pair productions can be accordingly determined. The characteristics of all of the other more energetic single-charged non-composite subatomic particles can also be recognised. We finally discuss the energy condition for pair production, which requires two successive energy supplies to (1) first disintegrate the bound pair of vaculeon charges +e, −e composing a vacuuon of the vacuum and (2) impart masses to the disintegrated charges.

  15. Disinfestation of agricultural products with electron beams and their radiation tolerance

    International Nuclear Information System (INIS)

    Hayashi, Toru

    1996-01-01

    Some agricultural products contaminated with insect pests are fumigated with methyl bromide for quarantine purposes. However, the use of methyl bromide is preferably restricted because of its ozone depleting effect. Therefore, establishing alternative quarantine techniques is highly desirable; one such technique is exposure to ionizing radiation. Few data are available on the effects of radiation on insect pests other than fruit flies and stored-product insects and on the radiation tolerance of host commodities. Radiation technology as an alternative to methyl bromide fumigation will be used to inactivate not only insects but also mites, spider mites, thrips, nematodes, scales, mealybugs and thrips contaminating fruits, grains, cut flowers, vegetables, timbers, seedlings and seeds. In order to collect data on the effects of irradiation on pests and host commodities, IAEA and FAO have conducted an international project, 'FAO/IAEA Coordinated Research Programme on Irradiation as a Quarantine Treatment of Mites, Nematodes and Insects other than Fruit Fly' since 1992. The project determines the minimum doses necessary to inactivate pests and the maximum doses host commodities tolerate. All pests except nematodes can be inactivated at doses 400Gy or lower. Various varieties of cut flowers and herbs are tolerant to 400Gy of radiation, although some flowers and herbs such as chrysanthemum, rose, lily, calla, anthurium, sweet pea, iris, dill, basil and arugula are intolerant to 200Gy of radiation. Japanese research project on treatment of cut flowers with electron beams carried out mainly by Yokohama Plant Protection Station greatly contributes to these conclusions. Aqueous solution (2%) of sucrose, glucose, fructose or maltose prevents radiation-induced detrimental effects of radiation on chrysanthemums. Sugars reduce radiation-induced physiological deterioration of chrysanthemums. (author)

  16. Raman scattering and associated fast electron production. Final technical report, April 16, 1984-April 15, 1985

    International Nuclear Information System (INIS)

    Brooks, R.D.; Pietrzyk, Z.A.

    1985-08-01

    High energy electrons in plasmas have been attributed to various causes including trapping by electron plasma waves created by stimulated Raman scattering. A theory, consistent with experimental results, based on the acceleration of trapped electrons by such electron plasma waves as they propagate in the presence of a density gradient away from the region where they are created is presented. Single particle simulations show accelerating voltages as high as 20 GV/m

  17. Effects of Electronic Information Resources Skills Training for Lecturers on Pedagogical Practices and Research Productivity

    Science.gov (United States)

    Bhukuvhani, Crispen; Chiparausha, Blessing; Zuvalinyenga, Dorcas

    2012-01-01

    Lecturers use various electronic resources at different frequencies. The university library's information literacy skills workshops and seminars are the main sources of knowledge of accessing electronic resources. The use of electronic resources can be said to have positively affected lecturers' pedagogical practices and their work in general. The…

  18. Alternate charging and discharging of capacitor to enhance the electron production of bioelectrochemical systems.

    Science.gov (United States)

    Liang, Peng; Wu, Wenlong; Wei, Jincheng; Yuan, Lulu; Xia, Xue; Huang, Xia

    2011-08-01

    A bioelectrochemical system (BES) can be operated in both "microbial fuel cell" (MFC) and "microbial electrolysis cell" (MEC) modes, in which power is delivered and invested respectively. To enhance the electric current production, a BES was operated in MFC mode first and a capacitor was used to collect power from the system. Then the charged capacitor discharged electrons to the system itself, switching into MEC mode. This alternate charging and discharging (ACD) mode helped the system produce 22-32% higher average current compared to an intermittent charging (IC) mode, in which the capacitor was first charged from an MFC and then discharged to a resistor, at 21.6 Ω external resistance, 3.3 F capacitance and 300 mV charging voltage. The effects of external resistance, capacitance and charging voltage on average current were studied. The average current reduced as the external resistance and charging voltage increased and was slightly affected by the capacitance. Acquisition of higher average current in the ACD mode was attributed to the shorter discharging time compared to the charging time, as well as a higher anode potential caused by discharging the capacitor. Results from circuit analysis and quantitatively calculation were consistent with the experimental observations.

  19. Assessment of a Standardized ROS Production Profile in Humans by Electron Paramagnetic Resonance

    Directory of Open Access Journals (Sweden)

    Simona Mrakic-Sposta

    2012-01-01

    Full Text Available Despite the growing interest in the role of reactive oxygen species (ROS in health and disease, reliable quantitative noninvasive methods for the assessment of oxidative stress in humans are still lacking. EPR technique, coupled to a specific spin probe (CMH: 1-hydroxy-3-methoxycarbonyl-2,2,5,5-tetramethylpyrrolidine is here presented as the method of choice to gain a direct measurement of ROS in biological fluids and tissues. The study aimed at demonstrating that, differently from currently available “a posteriori” assays of ROS-induced damage by means of biomolecules (e.g., proteins and lipids spin-trapping EPR provides direct evidence of the “instantaneous” presence of radical species in the sample and, as signal areas are proportional to the number of excited electron spins, lead to absolute concentration levels. Using a recently developed bench top continuous wave system (e-scan EPR scanner, Bruker dealing with very low ROS concentration levels in small (50 μL samples, we successfully monitored rapid ROS production changes in peripheral blood of athletes after controlled exercise and sedentary subjects after antioxidant supplementation. The correlation between EPR results and data obtained by various enzymatic assays (e.g., protein carbonyls and thiobarbituric acid reactive substances was determined too. Synthetically, our method allows reliable, quick, noninvasive quantitative determination of ROS in human peripheral blood.

  20. Crystallography of waxes - an electron diffraction study of refined and natural products

    Science.gov (United States)

    Dorset, Douglas L.

    1997-02-01

    The crystal structure of four waxes has been investigated by electron crystallography. Two of these waxes, including a refined petroleum product (Gulfwax) and a material from lignite (montan wax), form well ordered crystals and their structure could be solved quantitatively from the observed 0022-3727/30/3/018/img1 diffraction patterns. As also found previously for simpler binary n-paraffin solid solutions, the average structure resembles that of a pure paraffin (e.g. n-0022-3727/30/3/018/img2) but with a Gaussian distribution of atomic occupancies near the chain ends to account for the statistical distribution of chain lengths within a lamella. Two other waxes from living organisms, South African bee honeycomb and the leaves of the Brazilian carnauba palm, are much less ordered, even though they share the same methylene subcell packing of the most crystalline parts of the previous materials. It appears that these waxes cannot fully separate into distinct lamellae, perhaps due to the presence of very long `tie' molecules, and are therefore `frustrated' crystal structures.

  1. Consumers’ Preferences for Electronic Nicotine Delivery System Product Features: A Structured Content Analysis

    Directory of Open Access Journals (Sweden)

    Christine E. Kistler

    2017-06-01

    Full Text Available To inform potential governmental regulations, we aimed to develop a list of electronic nicotine delivery system (ENDS product features important to U.S. consumers by age and gender. We employed qualitative data methods. Participants were eligible if they had used an ENDS at least once. Groups were selected by age and gender (young adult group aged 18–25, n = 11; middle-age group aged 26–64, n = 9; and women’s group aged 26–64, n = 9. We conducted five individual older adult interviews (aged 68–80. Participants discussed important ENDS features. We conducted a structured content analysis of the group and interview responses. Of 34 participants, 68% were white and 56% were female. Participants mentioned 12 important ENDS features, including: (1 user experience; (2 social acceptability; (3 cost; (4 health risks/benefits; (5 ease of use; (6 flavors; (7 smoking cessation aid; (8 nicotine content; (9 modifiability; (10 ENDS regulation; (11 bridge between tobacco cigarettes; (12 collectability. The most frequently mentioned ENDS feature was modifiability for young adults, user experience for middle-age and older adults, and flavor for the women’s group. This study identified multiple features important to ENDS consumers. Groups differed in how they viewed various features by age and gender. These results can inform ongoing regulatory efforts.

  2. Biomass production from electricity using ammonia as an electron carrier in a reverse microbial fuel cell.

    Directory of Open Access Journals (Sweden)

    Wendell O Khunjar

    Full Text Available The storage of renewable electrical energy within chemical bonds of biofuels and other chemicals is a route to decreasing petroleum usage. A critical challenge is the efficient transfer of electrons into a biological host that can covert this energy into high energy organic compounds. In this paper, we describe an approach whereby biomass is grown using energy obtained from a soluble mediator that is regenerated electrochemically. The net result is a separate-stage reverse microbial fuel cell (rMFC that fixes CO₂ into biomass using electrical energy. We selected ammonia as a low cost, abundant, safe, and soluble redox mediator that facilitated energy transfer to biomass. Nitrosomonas europaea, a chemolithoautotroph, was used as the biocatalyst due to its inherent capability to utilize ammonia as its sole energy source for growth. An electrochemical reactor was designed for the regeneration of ammonia from nitrite, and current efficiencies of 100% were achieved. Calculations indicated that overall bioproduction efficiency could approach 2.7±0.2% under optimal electrolysis conditions. The application of chemolithoautotrophy for industrial bioproduction has been largely unexplored, and results suggest that this and related rMFC platforms may enable biofuel and related biochemical production.

  3. Precision measurements of W and Z boson production and their decays to electrons at hadron colliders

    CERN Document Server

    Ehlers, Jans H Hermann; Pauss, Felicitas

    For many measurements at hadron colliders, such as cross sections and branching ratios, the uncertainty of the integratedluminosity is an important contributionto the error of the final result. In 1997, the ETH Zürich group proposeda new approach to determinethe integrated luminosity via a counting measurement of the W and Z bosons throughtheir decays to leptons. In this thesis this proposal has been applied on real data as well as on Simulation for a future experiment. The first part of this thesis describes a dedicated data analysis to precisely mea¬ sure the luminosity at the CDF experimentat the Tevatroncollider (USA) through the production of Z bosons and their decay to electrons. An integrated pp lumi¬ nosity of .Lcounting = 221.7 ± 2.8 (stat.) ± 11.2 (sys.) pb"1 has been measured for the data taking period from March 2002 to February 2004. This is in very good agreement with the traditional measurement at CDF of Lci.c ~ 222.2 ± 12.9 pb-1, using Cherenkov LuminosityCountersat large angles. Bothmea...

  4. Electron-pair production in Pb - Au collisions at 40 AGeV

    CERN Document Server

    Damjanovic, Sanja

    2002-01-01

    This thesis contains the first experimental results on electron-pair production from the CERES/NA45 experiment at the CERN SPS after the upgrade with a Time Projection Chamber (TPC). The data were taken in late 1999 with a Pb-beam on a Au-target at a beam energy of 40 AGeV. Out of about 8 Million events with a 30$$ centrality selection, 249$pm$28 $e^{+}e^{-}$ pairs for masses $le$0.2 GeV/c$^{2}$ with a S/B ratio of 1/1, and 185$pm$48 $e^{+}e^{-}$ pairs for masses $>$0.2 GeV/c$^{2}$ with a S/B ratio of 1/6 were reconstructed. The low-mass sample agrees with the expectation from hadronic decays. The high-mass sample shows an excess of a factor of 5.1$pm$1.3(stat)$pm$1.0(syst) above that expectation, considerably more than the values around 2.5-3.5 observed before at the higher beam energy of 160 AGeV. The excess yield is dominantly associated with pair transverse momenta $<$0.5 GeV/c, consistent with the findings at 160 AGeV. The theoretical relevance of the results is discussed in some detail. The dilepton ...

  5. The erosion and erosion products of tungsten and carbon based materials bombarded by high energy pulse electron beam

    International Nuclear Information System (INIS)

    Liu Xiang; Zhang Fu; Xu Zengyu; Liu Yong; Yoshida, N.; Noda, N.

    2002-01-01

    In this paper, the erosion behaviors and erosion products of tungsten and some carbon based materials, such as graphite, C/C composite and B 4 C/Cu functionally graded material, were investigated by using a pulse electron beam to simulate the vertical displacement events (VDE) process. The authors will focus on the forms and differences of erosion products among these testing materials, and make clear to their erosion mechanisms

  6. On a method for high-energy electron beam production in proton synchrotrons

    International Nuclear Information System (INIS)

    Bessonov, E.G.; Vazdik, Ya.A.

    1979-01-01

    It is suggested to produce high-energy electron beams in such a way that the ultrarelativistic protons give an amount of their kinetic energy to the electrons of a thin target, placed inside the working volume of the proton synchrotron. The kinematics of the elastic scattering of relativistic protons on electrons at rest is treated. Evaluation of a number of elastically-scattered electrons by 1000 GeV and 3000 GeV proton beams is presented. The method under consideration is of certain practical interest and may appear to be preferable in a definite energy range of protons and electrons

  7. Production of a large diameter ECR plasma with low electron temperature

    International Nuclear Information System (INIS)

    Koga, Mayuko; Hishikawa, Yasuhiro; Tsuchiya, Hayato; Kawai, Yoshinobu

    2006-01-01

    A large diameter plasma over 300 mm in diameter is produced by electron cyclotron resonance (ECR) discharges using a cylindrical vacuum chamber of 400 mm in inner diameter. It is found that the plasma uniformity is improved by adding the nitrogen gas to pure Ar plasma. The electron temperature is decreased by adding the nitrogen gas. It is considered that the electron energy is absorbed in the vibrational energy of nitrogen molecules and the electron temperature decreases. Therefore, the adjunction of the nitrogen gas is considered to be effective for producing uniform and low electron temperature plasma

  8. Production of hot electrons in mirror systems associated with ECR heating with longitudinal input of microwaves

    International Nuclear Information System (INIS)

    Zhil'tsov, V.A.; Skovoroda, A.A.; Timofeev, A.V.; Kharitonov, K.Yu.; Shcherbakov, A.G.

    1991-01-01

    Almost all experiments on ECR plasma heating are accompanied by the formation of hot electrons (i.e., electrons with energy substantially greater than the average of the bulk population). In mirror systems these electrons may determine the basic energy content (β) of the plasma. In this paper, results are presented from experimental measurements of the hot electron population resulting from ECR heating of the plasma in OGRA-4. A theoretical model is developed which describes the hot electron dynamics and the propagation of electromagnetic oscillations in the plasma self-consistently. The results obtained with this model are in agreement with experimental data

  9. Analysis of association between a microsatellite at intron 1 of the insulin-like growth factor 1 (IGF1 gene and fat deposition, meat production and quality traits in Italian Large White and Italian Duroc pigs

    Directory of Open Access Journals (Sweden)

    Luca Fontanesi

    2013-10-01

    Full Text Available A few studies have shown that a microsatellite at intron 1 of the insulin-like growth factor 1 (IGF1 gene is associated with several production traits in a few pig populations. In the current work we evaluated associations between this microsatellite and production traits in Italian Large White and Italian Duroc pigs. Association studies were carried out on a total of 1120 animals using two experimental designs: i a selective genotyping approach based on extreme and divergent Italian Large White pigs for back fat thickness (BFT estimated breeding value (EBV or on extreme and divergent Italian Duroc pigs for visible intermuscular fat (VIF EBV; and ii analysis of unselected pigs (random groups coming from populations of the two breeds. Allele distributions between Italian Large White and Italian Duroc pigs were different (P<0.05 with longer alleles being more frequent in Italian Large White. Results of the association analyses from two different random groups showed that this marker affects average daily gain EBV, lean cut EBV and BFT EBV in Italian Large White and BFT EBV in Italian Duroc (P<0.05. Association analysis carried out with random residuals confirmed, to some extent (P=0.096, the effects on BFT in the same animals. However, this result was not confirmed in the two extreme and divergent Italian Large White groups used in the selective genotyping experiment. These inconsistent results may indicate that the effect of the IGF1 microsatellite is doubtful in the investigated finishing pigs.

  10. Production of high-quality electron bunches by dephasing and beam loading in channeled and unchanneled laser plasma accelerators

    International Nuclear Information System (INIS)

    Geddes, C.G.R.; Toth, Cs.; Tilborg, J. van; Esarey, E.; Schroeder, C.B.; Bruhwiler, D.; Nieter, C.; Cary, J.; Leemans, W.P.

    2005-01-01

    High-quality electron beams, with a few 10 9 electrons within a few percent of the same energy above 80 MeV, were produced in a laser wakefield accelerator by matching the acceleration length to the length over which electrons were accelerated and outran (dephased from) the wake. A plasma channel guided the drive laser over long distances, resulting in production of the high-energy, high-quality beams. Unchanneled experiments varying the length of the target plasma indicated that the high-quality bunches are produced near the dephasing length and demonstrated that channel guiding was more stable and efficient than relativistic self-guiding. Consistent with these data, particle-in-cell simulations indicate production of high-quality electron beams when trapping of an initial bunch of electrons suppresses further injection by loading the wake. The injected electron bunch is then compressed in energy by dephasing, when the front of the bunch begins to decelerate while the tail is still accelerated

  11. Measurement of single electron production up to 45 GeV/c transverse momentum at the CERN ISR

    CERN Document Server

    Pérez, P; Clark, A G; Darriulat, Pierre; Eggert, K; Hungerbühler, V; Jenni, Peter; Modis, T; Smadja, G; Strauss, J S; Strolin, P; Tarnopolsky, G J; Teiger, J; Tur, C; Vialle, J P; Zaccone, Henri; Zallo, A; Zylberstejn, A

    1982-01-01

    The production of single electrons of transverse momentum between 1.8 and 4.5 GeV/c is measured in pp collisions at \\sqrt{s}=53 and 63 GeV. Contributions from rho , omega , phi , psi , Upsilon , DD and Drell-Yan pairs are deduced from measurements in the same apparatus.

  12. 77 FR 29360 - Used Electronic Products: An Examination of U.S. Exports Submission of Questionnaire for OMB Review

    Science.gov (United States)

    2012-05-17

    ... INTERNATIONAL TRADE COMMISSION [INVESTIGATION NO. 332-528] Used Electronic Products: An... Trade Commission. ACTION: In accordance with the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the U.S. International Trade Commission (Commission) has submitted a request for...

  13. 41 CFR 101-26.605 - Items other than petroleum products and electronic items available from the Defense Logistics...

    Science.gov (United States)

    2010-07-01

    ... petroleum products and electronic items available from the Defense Logistics Agency. 101-26.605 Section 101... available from the Defense Logistics Agency. Agencies required to use GSA supply sources should also use... Logistics Agency, the catalog will contain only those items in Federal supply classification classes which...

  14. Nanofabrication Technology for Production of Quantum Nano-Electronic Devices Integrating Niobium Electrodes and Optically Transparent Gates

    Science.gov (United States)

    2018-01-01

    TECHNICAL REPORT 3086 January 2018 Nanofabrication Technology for Production of Quantum Nano-electronic Devices Integrating Niobium Electrodes...work described in this report was performed for the by the Advanced Concepts and Applied Research Branch (Code 71730) and the Science and Technology ...Applied Sciences Division iii EXECUTIVE SUMMARY This technical report demonstrates nanofabrication technology for Niobium heterostructures and

  15. The Effect of Electronic Word of Mouth on Sales: A Meta-Analytic Review of Platform, Product, and Metric Factors

    NARCIS (Netherlands)

    Babic, A.; Sotgiu, Francesca; de Valck, K.; Bijmolt, T.H.A.

    2016-01-01

    The increasing amount of electronic word of mouth (eWOM) has significantly affected the way consumers make purchase decisions. Empirical studies have established an effect of eWOM on sales but disagree on which online platforms, products, and eWOM metrics moderate this effect. The authors conduct a

  16. Production of photons with a narrow energy spectrum, starting from high energy electrons; Production de photons de spectre etroit a partir d'electrons de grande energie

    Energy Technology Data Exchange (ETDEWEB)

    Tzara, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    A method for the production of photons with a narrow spectrum and of variable energy, based on the properties of the annihilation in flight of positrons, is examined in detail. The spectra of the photons produced and the yield of the process are given for various conditions. (author) [French] Une methode de production de photons de spectre etroit et d'energie variable, basee sur les proprietes de l'annihilation en vol des positons, est examinee en detail. Le spectre des photons produits, le rendement du processus sont donnes pour diverses conditions. (auteur)

  17. A method for conversion of Hounsfield number to electron density and prediction of macroscopic pair production cross-sections

    International Nuclear Information System (INIS)

    Knoeoes, T.; Nilsson, M.; Ahlgren, L.

    1986-01-01

    A method for the determination of electron density using a narrow beam attenuation geometry is described. The method does not require that the elemental composition of the phantom materials is known. The Hounsfield numbers for the phantom materials used were determined using five different CT scanners. A relationship between Hounsfield number and electron density can thus be established, which is of considerable value in radiation therapy treatment planning procedures. Measurements of the ratio coherent/incoherent scattering of low energy photons in a certain geometry has proven valuable for determination of atomic number, which in its turn can be used for estimation of macroscopic pair production coefficients for high energy photons. The combination of knowledge of electron density with methods for determination of processes, dependent on atomic number, can form a base for adequate composition of phantom materials for purposes of testing dose calculation algorithms for photons and electrons. (orig.)

  18. Influence of the electron cyclotron resonance plasma confinement on reducing the bremsstrahlung production of an electron cyclotron resonance ion source with metal-dielectric structures.

    Science.gov (United States)

    Schachter, L; Stiebing, K E; Dobrescu, S

    2009-01-01

    The influence of metal-dielectric (MD) layers (MD structures) inserted into the plasma chamber of an electron cyclotron resonance ion source (ECRIS) onto the production of electron bremsstrahlung radiation has been studied in a series of dedicated experiments at the 14 GHz ECRIS of the Institut für Kernphysik der Universität Frankfurt. The IKF-ECRIS was equipped with a MD liner, covering the inner walls of the plasma chamber, and a MD electrode, covering the plasma-facing side of the extraction electrode. On the basis of similar extracted currents of highly charged ions, significantly reduced yields of bremsstrahlung radiation for the "MD source" as compared to the standard (stainless steel) source have been measured and can be explained by the significantly better plasma confinement in a MD source as compared to an "all stainless steel" ECRIS.

  19. Influence of the electron cyclotron resonance plasma confinement on reducing the bremsstrahlung production of an electron cyclotron resonance ion source with metal-dielectric structures

    International Nuclear Information System (INIS)

    Schachter, L.; Dobrescu, S.; Stiebing, K. E.

    2009-01-01

    The influence of metal-dielectric (MD) layers (MD structures) inserted into the plasma chamber of an electron cyclotron resonance ion source (ECRIS) onto the production of electron bremsstrahlung radiation has been studied in a series of dedicated experiments at the 14 GHz ECRIS of the Institut fuer Kernphysik der Universitaet Frankfurt. The IKF-ECRIS was equipped with a MD liner, covering the inner walls of the plasma chamber, and a MD electrode, covering the plasma-facing side of the extraction electrode. On the basis of similar extracted currents of highly charged ions, significantly reduced yields of bremsstrahlung radiation for the 'MD source' as compared to the standard (stainless steel) source have been measured and can be explained by the significantly better plasma confinement in a MD source as compared to an ''all stainless steel'' ECRIS.

  20. 77 FR 70714 - Electronic Import Inspection Application and Certification of Imported Products and Foreign...

    Science.gov (United States)

    2012-11-27

    ... Import Inspection Application and Certification of Imported Products and Foreign Establishments..., the egg products import regulations provide for foreign country (not establishment) certification to... imported egg products at this time. The Agency will propose foreign establishment certification in a...