WorldWideScience

Sample records for production technologies partial

  1. Cost-saving production technologies and partial ownership

    OpenAIRE

    Juan Carlos Barcena-Ruiz; Norma Olaizola

    2007-01-01

    This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

  2. Inventory of future power and heat production technologies. Partial report Energy combines

    International Nuclear Information System (INIS)

    Thunman, Henrik; Lind, Fredrik; Johnsson, Filip

    2008-12-01

    This report treats different ways to produce various upgraded biofuels from lignocellulosic materials in so called polygeneration processes. Furthermore the different upgrading technologies are also investigated with respect to co-production of heat and power. The processes investigated are linked to production of - bio pellets (or lignin pellets), dried, grinded and compressed biomass (or lignin); - torrified bio pellets, dried, grinded, heat treated and compressed biomass; - bio-oils or pyrolytic oils, liquefied biomass with crude oil quality; - ethanol via hydrolysis (process where the biomass is divided into sugars and lignin) followed by fermentation; - methane via hydrolysis and fermentation; - methane via indirect gasification and methane via indirect or suspension gasification, - DME (dimethyl ether) via indirect or suspension gasification; - methanol via indirect or suspension gasification; - DME and methanol via methane produced via indirect gasification. Lignocellulosic biomasses are, for example, forest residues or biomass that can be cultivated on degraded lands. The result from this report shows that it is only the production of bio pellets that is fully commercially available today. For all the other polygeneration processes investigated the production of bio-oil and torrified bio pellets stands out from the other processes investigated, as it is the market for the product that holds back the introduction of the technology. For the other technologies one or several components are still not commercialized and the challenges for these technologies are described in the report. Summarizing the efficiencies for the different processes, the processes that produces biofuels for stationary applications, bio pellets, torrified bio pellets and bio-oil, show the highest efficiencies. Accounted for the co-generated power, efficiencies up to 90 % based on ingoing lower heating values of the dry substance fed to the process could be achieved. For the processes

  3. Inventory of future power and heat production technologies. Partial report Energy combines; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Energikombinat

    Energy Technology Data Exchange (ETDEWEB)

    Thunman, Henrik; Lind, Fredrik; Johnsson, Filip (Chalmers Univ. of Technology, Goeteborg (Sweden))

    2008-12-15

    This report treats different ways to produce various upgraded biofuels from lignocellulosic materials in so called polygeneration processes. Furthermore the different upgrading technologies are also investigated with respect to co-production of heat and power. The processes investigated are linked to production of - bio pellets (or lignin pellets), dried, grinded and compressed biomass (or lignin); - torrified bio pellets, dried, grinded, heat treated and compressed biomass; - bio-oils or pyrolytic oils, liquefied biomass with crude oil quality; - ethanol via hydrolysis (process where the biomass is divided into sugars and lignin) followed by fermentation; - methane via hydrolysis and fermentation; - methane via indirect gasification and methane via indirect or suspension gasification, - DME (dimethyl ether) via indirect or suspension gasification; - methanol via indirect or suspension gasification; - DME and methanol via methane produced via indirect gasification. Lignocellulosic biomasses are, for example, forest residues or biomass that can be cultivated on degraded lands. The result from this report shows that it is only the production of bio pellets that is fully commercially available today. For all the other polygeneration processes investigated the production of bio-oil and torrified bio pellets stands out from the other processes investigated, as it is the market for the product that holds back the introduction of the technology. For the other technologies one or several components are still not commercialized and the challenges for these technologies are described in the report. Summarizing the efficiencies for the different processes, the processes that produces biofuels for stationary applications, bio pellets, torrified bio pellets and bio-oil, show the highest efficiencies. Accounted for the co-generated power, efficiencies up to 90 % based on ingoing lower heating values of the dry substance fed to the process could be achieved. For the processes

  4. Inventory of future power and heat production technologies. Partial report Small-scale technology; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Smaaskalig teknik

    Energy Technology Data Exchange (ETDEWEB)

    Ridell, Bengt (Grontmij AB (Sweden))

    2008-12-15

    The following techniques for small-scale production have been selected to be studied more carefully, Fuel cells, Photovoltaics, Organic Rankine Cycle (ORC), and Wave power. Of the four selected technologies, fuel cells, solar cells, ORC are appropriate for use in so-called distributed generation, to be used close to a consumer, and possibly also for the production of electricity. Wave power is more like the wind in nature and is probably better suited to be used by power companies for direct input to the transmission grid. None of these technologies are now competitive against buying electricity from the Swedish grid. However, there are opportunities for all to reduce production costs so that they can become competitive alternatives in the future, depending largely on the general development of electricity prices, taxes, delivery reliability, etc. The four different technologies have different development stages and requirements that affect their possibility for a commercial breakthrough. These technologies will probably not all get a breakthrough in Sweden. Small-scale technologies will in the time period up to 2030 not be able to compete with the large-scale technologies that exist in today's power grid. In the longer term the situation may be different. The power system might be reduced in importance if the small scale technologies become cheap, reliable and easy to use. Electricity can then be produced locally, directly related to user needs

  5. Inventory of future power and heat production technologies. Partial report Wind Power; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Vindkraft

    Energy Technology Data Exchange (ETDEWEB)

    Clausen, Niels-Erik; Lawaetz, Henrik; Lemming, Joergen; Morthorst, Poul Erik [Risoe National Laboratory, Roskilde (Denmark)

    2008-12-15

    The development of the wind energy technology has been very successful from the 1970s and up till now. Initially there was a battle between wind turbine concepts, but the commercial winner today is the three-bladed horizontal axis, upwind, electricity producing and grid connected wind turbine with availability on mature markets somewhere around 99%. An important contributor to the growth of the European market for wind energy technology has been EU framework legislation combined with legislation at the national level. The binding target for renewable energy in Sweden is proposed to be 49% of the final energy consumption in 2020 compared to 39.8% in 2005. To stimulate the development of wind energy and to promote a specific national goals Sweden is mainly using an electricity certificate system. The target is to increase the production of electricity from renewable sources by 17 TWh in 2016, relative to corresponding production in 2002. There is not at specific target for the use of wind energy. A future energy system that includes a high proportion of wind energy will be expected to meet the same requirements for security of supply and economic efficiency as the energy systems of today. The variability of wind power create a specific challenges for the future energy systems compared to those of today. The economics of wind power depends mainly of investment cost, operation and maintenance costs, electricity production and turbine lifetime. An average turbine installed in Europe has a total investment cost of 1.230 Euro/kW with a typically variation from approximately 1000 Euro/kW to approximately 1400 Euro/kW. The calculated costs per kWh wind generated power range from approximately 0.07-0.10 Euro/kWh at sites with low average wind speeds to approximately 0.05-0.065 Euro/kWh at good coastal positions, with an average of approximately 0.07 Euro/kWh at a medium wind site. Offshore costs are largely dependent on weather and wave conditions, water depth, and distance

  6. Inventory of future power and heat production technologies. Partial report Energy storage; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Energilagring

    Energy Technology Data Exchange (ETDEWEB)

    Messing, Lars; Lindahl, Sture (Gothia Power AB, Goeteborg (Sweden))

    2008-12-15

    during critical periods and can therefore be an alternative to new power lines. Hydrogen energy storage: The handling (storage and transfer) of hydrogen is considered to be difficult and dangerous. Air-compression energy storage: This method is combined with gas turbine plants. During periods with surplus of energy in the power system this surplus energy is used to compress air and store it. This compressed air is used in the operation of gas turbine power plant where the compressed air is used instead of the normal use where the gas turbine makes the compression. The possibility should be considered in the future if new gas turbine power plants are to be built in Sweden. This is not the situation today. Different application areas where the energy storage can be used are discussed, such as: Electrical supply quality improvement; Improvement of power system transient stability; Damping of electromechanical oscillations in the power system; Spinning disturbance power reserves; Power system frequency control; Fast disturbance power reserves (activated within 15 minutes); Optimization of energy production dispatch; Increase of power grid transmission capacity. In the scientific world the technical development is very active within areas regarding batteries, capacitors with very large storage capacity, flywheels, etc. As the progress is very fast and this report gives only a brief survey of the research within the area, there is a need to continuously follow the technical development. The judgement is done that there is demand for evaluation of the value of energy storage for different applications and to identify suitable methods to be used in the different applications. Regarding conditions and demands in Sweden and the other Nordic countries research and development activities should be done as: Identify application areas where there are requirements of improvements in the power system. From the identified demands it should be analysed if electrical energy storage can be

  7. Inventory of future power and heat production technologies. Partial report Energy storage; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Energilagring

    Energy Technology Data Exchange (ETDEWEB)

    Messing, Lars; Lindahl, Sture [Gothia Power AB, Goeteborg (Sweden)

    2008-12-15

    critical periods and can therefore be an alternative to new power lines. Hydrogen energy storage: The handling (storage and transfer) of hydrogen is considered to be difficult and dangerous. Air-compression energy storage: This method is combined with gas turbine plants. During periods with surplus of energy in the power system this surplus energy is used to compress air and store it. This compressed air is used in the operation of gas turbine power plant where the compressed air is used instead of the normal use where the gas turbine makes the compression. The possibility should be considered in the future if new gas turbine power plants are to be built in Sweden. This is not the situation today. Different application areas where the energy storage can be used are discussed, such as: Electrical supply quality improvement; Improvement of power system transient stability; Damping of electromechanical oscillations in the power system; Spinning disturbance power reserves; Power system frequency control; Fast disturbance power reserves (activated within 15 minutes); Optimization of energy production dispatch; Increase of power grid transmission capacity. In the scientific world the technical development is very active within areas regarding batteries, capacitors with very large storage capacity, flywheels, etc. As the progress is very fast and this report gives only a brief survey of the research within the area, there is a need to continuously follow the technical development. The judgement is done that there is demand for evaluation of the value of energy storage for different applications and to identify suitable methods to be used in the different applications. Regarding conditions and demands in Sweden and the other Nordic countries research and development activities should be done as: Identify application areas where there are requirements of improvements in the power system. From the identified demands it should be analysed if electrical energy storage can be used to

  8. Public-Interest Benefit Evaluation of Partial- Upgrading Technology

    Directory of Open Access Journals (Sweden)

    G. Kent Fellows

    2017-01-01

    Full Text Available Approximately 60 per cent of Alberta’s oil sands production is non-upgraded bitumen which, after being mixed with a diluting agent (diluent to allow transport, is exported. A popular view within Alberta — and particularly among Albertan politicians — is that a much larger share of oil sands bitumen should be upgraded in the province. However, without public subsidies or government underwriting, it is uneconomic to build and operate new facilities in Alberta to fully upgrade the bitumen into synthetic crude oil. But there are new partial upgrading technologies being developed that, subject to successful testing at a larger (commercial pilot scale, can prove to be not only economic in Alberta, but also generate large social and economic benefits for the province. The advantages include a much smaller capital investment, a significant increase in the value of the product and market for the product and, even more importantly, a dramatic reduction in the need for large amounts of expensive diluent to transport the product to market. Indeed, the only diluent required will be that to move the bitumen from the production site to the partial upgrader and this can be continually recycled. The market for the synthetic crude oil produced by full upgrading is only getting tougher. Any Alberta bitumen fully upgraded here would compete closely with the rapidly expanding supply of light U.S. unconventional oil. Partial upgrading does not upgrade bitumen to a light crude, but to something resembling more of a medium or heavy crude, and at a lower cost per barrel than full upgrading. Unlike in the increasingly crowded light-crude market, the Alberta Royalty Review Advisory Panel recognized that currently there are gaps in several North American refineries that could be filled by this partially upgraded Alberta oil. A partial upgrader serving that less-competitive market not only appears to hold the potential for investors to make attractive returns in the

  9. An Imperative Type Hierarchy with Partial Products

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Schmidt, Erik Meineche

    1989-01-01

    notation for defining recursive types, that is superior to traditional type sums and products. We show how the ordering on types extends to an ordering on types with invariants. We allow the use of least upper bounds in type definitions and show how to compute upper bounds of invariants.......A type hierarchy for a programming language defines an ordering on the types such that any application for small types may be reused for all larger types. The imperative facet makes this non-trivial; the straight-forward definitions will yield an inconsistent system. We introduce a new type...... constructor, the partial product, and show how to define a consistent hierarchy in the context of fully recursive types. A simple polymorphism is derived by introducing a notion of placeholder types. By extending the partial product types to include structural invariants we obtain a particularly appropriate...

  10. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  11. Telescopic Partial Dentures-Concealed Technology.

    Science.gov (United States)

    Bhagat, Tushar Vitthalrao; Walke, Ashwini Nareshchandra

    2015-09-01

    The ideal goal of good dentist is to restore the missing part of oral structure, phonetics, his look and the most important is restored the normal health of the patient, which is hampered due to less or insufficient intake of food. Removable partial denture (RPD) treatment option is considered as a notion, which precludes the inevitability of "floating plastic" in edentulous mouth, that many times fail to fulfill the above essential of the patients. In modern dentistry, though the dental implants or fixed partial denture is the better options, but they have certain limitations. However, overdentures and particularly telescopic denture is the overlooked technology in dentistry that would be a boon for such needy patients. Telescopic denture is especially indicated in the distal edentulous area with minimum two teeth bilaterally present with a good amount of periodontal support. This treatment modality is sort of preventive prosthodontics remedy, which in a conservative manner preserve the remaining teeth and helps in conservation of alveolar bone ultimately. There are two tenets related to this option, one is constant conservation edentulous ridge around the retained tooth and the most important is the endless existence of periodontal sensory action that directs and monitor gnathodynamic task. In this option the primary coping or inner coping are cemented on the prepared tooth, and a similar removable outer or inner telescopic crown placed tightly by using a mechanism of tenso-friction, this is firmly attached to a removable RPD in place without moving or rocking of the prosthesis, which is the common compliant of almost all patients of RPD. Copings are also protecting the abutment from tooth decay and also offers stabilization and maintaining of the outer crown. The outer crown engages the inner coping and gives as an anchor for the remainder of the dentition. This work is the review of telescopic prosthesis which is well supported by the case discussion, and

  12. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  13. Telescopic Partial Dentures-Concealed Technology

    OpenAIRE

    Bhagat, Tushar Vitthalrao; Walke, Ashwini Nareshchandra

    2015-01-01

    The ideal goal of good dentist is to restore the missing part of oral structure, phonetics, his look and the most important is restored the normal health of the patient, which is hampered due to less or insufficient intake of food. Removable partial denture (RPD) treatment option is considered as a notion, which precludes the inevitability of ?floating plastic? in edentulous mouth, that many times fail to fulfill the above essential of the patients. In modern dentistry, though the dental impl...

  14. Remelt Ingot Production Technology

    Science.gov (United States)

    Grandfield, J. F.

    The technology related to the production of remelt ingots (small ingots, sows and T-Bar) is reviewed. Open mold conveyors, sow casting, wheel and belt casting and VDC and HDC casting are described and compared. Process economics, capacity, product quality and process problems are listed. Trends in casting machine technology such as longer open mold conveyor lines are highlighted. Safety issues related to the operation of these processes are discussed. The advantages and disadvantages of the various machine configurations and options e.g. such as dry filling with the mold out of water and wet filling with the mold in water for open mould conveyors are discussed. The effect of mold design on machine productivity, mold cracking and mold life is also examined.

  15. Nano Manufacturing - Products and Technologies

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Alting, Leo

    2004-01-01

    The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

  16. Production and Partial Characterization of Cellulases from ...

    African Journals Online (AJOL)

    The optimum temperature of CCI was 55°C whereas that of CCO was 50°C. The stability of enzymes from 35°C to 70°C was studied. At 70°C, CCO cellulase has lost 45.88% of its original activity while CCI cellulase lost 58.14%. The results show that corn cob could serve as a cheap carbon source for the production of fungi ...

  17. Biodiesel production technologies: review

    Directory of Open Access Journals (Sweden)

    Shemelis Nigatu Gebremariam

    2017-05-01

    Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

  18. Production and partial purification of extracellular tannase by ...

    African Journals Online (AJOL)

    End-product repression was also studied with inclusion of gallic acid to the growth medium. Enrichment with various additives of metal ions and detergents resulted in inhibition of tannase production. The enzyme was partially purified using ammonium sulfate precipitation followed by the use of DEAE-cellulose. SDS-PAGE ...

  19. Report on ISS Oxygen Production, Resupply, and Partial Pressure Management

    Science.gov (United States)

    Schaezler, Ryan; Ghariani, Ahmed; Leonard, Daniel; Lehman, Daniel

    2011-01-01

    The majority of oxygen used on International Space Station (ISS) is for metabolic support and denitrogenation procedures prior to Extra-Vehicular Activities. Oxygen is supplied by various visiting vehicles such as the Progress and Shuttle in addition to oxygen production capability on both the United States On-Orbit Segment (USOS) and Russian Segment (RS). To maintain a habitable atmosphere the oxygen partial pressure is controlled between upper and lower bounds. The full range of the allowable oxygen partial pressure along with the increased ISS cabin volume is utilized as a buffer allowing days to pass between oxygen production or direct addition of oxygen to the atmosphere from reserves. This paper summarizes amount of oxygen supplied and produced from all of the sources and describes past experience of managing oxygen partial pressure along with the range of management options available to the ISS.

  20. PDT (Product Data Technology), Production and Society

    DEFF Research Database (Denmark)

    Vesterager, Johan

    1997-01-01

    Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

  1. Selecting appropriate technology for hydrogen production

    International Nuclear Information System (INIS)

    Tamhankar, S.S.

    2004-01-01

    'Full text:' Technologies for the production of synthesis gas (H2 + CO), a precursor to hydrogen, from a variety of fossil fuels are well known in industrial applications at relatively large scale. These include Steam Reforming (SR), Auto-Thermal Reforming (ATR) and Partial Oxidation (POX). A particular technology is selected based on the feed type and the desired products. Steam reforming is a mature technology, and is most prevalent for hydrogen production because of its high efficiency. However, at the smaller scale, the capital cost becomes a more significant factor, and a substantial reduction in this cost is necessary to meet the overall H2 gas cost targets, such as that stated by DOE ($1.50/kg). In developing small-scale H2 technologies, often, incremental improvements are incorporated. While useful, these are not adequate for the desired cost reduction. Also, for effective cost reduction, the whole system, including production, purification and associated equipment needs to be evaluated; cost reduction in just one of the units is not sufficient. This paper provides a critical assessment of the existing as well as novel technology options, specifically targeted at small scale H2 production. The technology options are evaluated to clearly point out which may or may not work and why. (author)

  2. Quantized fields and operators on a partial inner product space

    International Nuclear Information System (INIS)

    Shabani, J.

    1985-11-01

    We investigate the connection between the space OpV of all operators on a partial inner product space V and the weak sequential completion of the * algebra L + (Vsup(no.)) of all operators X such that Vsup(no.) is contained in D(X) intersection D(X*) and both X and its adjoint X* leave Vsup(no.) invariant. This connection gives a mathematical description of quantized fields in terms of elements of OpV. (author)

  3. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-mei; Wang, Xin-jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  4. Technology of Furniture Production

    OpenAIRE

    Danilova, Kseniia

    2016-01-01

    Manufacturing of furniture is one of the main processes of timber utilization. Furniture of Timberica Oy brand is made by special technology which does not allow use aggressive chemicals that can be harmful to humans, in wood processing. The furniture is made of Karelian "white" pine. Company's headquarters are located in Finland, its specialists improve and carefully controlled manufacturing process at the furniture factory in Karelia. Timberica Oy has produced furniture since 1998. They...

  5. 76 FR 10004 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-02-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  6. 76 FR 54734 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-09-02

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  7. 76 FR 30647 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-05-26

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  8. 75 FR 72792 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-11-26

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  9. 77 FR 70140 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-11-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Export Administration on emerging technology and research activities, including those related to deemed...

  10. 75 FR 41439 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-07-16

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  11. 75 FR 5952 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-02-05

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  12. 76 FR 72902 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-11-28

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  13. 75 FR 62508 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-10-12

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  14. 78 FR 21346 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-04-10

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  15. Forest Products Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-04-01

    This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

  16. Radiation technology and feed production

    International Nuclear Information System (INIS)

    Ershov, B.G.

    1986-01-01

    The use of radiation technology to prepare feeds and feed additions for cattle of non-feed vegetable blends is considered.Physicochemical foundations of radiation-chemical processes, possibilities of the use of various radiation devices are given. Data on practical realization of the technology are presented and prospects of its introduction to solve the tasks put forward by the USSR program on feed production are analyzed

  17. New technologies in biodiesel production

    International Nuclear Information System (INIS)

    Santacesaria, E.; Di Serio, M.; Tesser, R.

    2009-01-01

    The cost of biodiesel is nowadays affected by the cost of the raw materials, because the currently used method of preparation requires highly refined vegetable oils containing very low amounts of free fatty acids and moisture. Alternatively, less expensive technologies are possible using heterogeneous catalysts. In the present paper examples of these new technologies, based on the use of heterogeneous catalysts, in the production of biodiesel are described and discussed. [it

  18. Improvement of radioisotope production technology

    International Nuclear Information System (INIS)

    Li Yongjian

    1987-01-01

    The widespreading and deepgoing applications of radioisotopes results the increasing demands on both quality and quantity. This in turn stimulating the production technology to be improved unceasingly to meet the different requirements on availability, variety, facility, purity, specific activity and specificity. The major approaches of achieving these improvements including: optimizing mode of production; enhancing irradiation conditions; amelioration target arrangement; adapting nuclear process and inventing chemical processing. (author)

  19. Fission 99Mo production technology

    International Nuclear Information System (INIS)

    Miao Zengxing; Luo Zhifu; Ma Huimin; Liang Yufu; Yu Ningwen

    2003-01-01

    This paper describes a production technology of fission 99 Mo in the Department Isotope, CIAE. The irradiation target is tubular U-Al alloy containing highly enriched uranium. The target is irradiated in the swimming pool reactor core. The neutron flux is about 4x10 13 /cm 2 .sec. The production scale is 3.7-7.4 TBq (100-200Ci) of fission 99 Mo per batch. Total recovery of 99 Mo is more than 70%. The production practice proves that the process and equipment are safe and reliable. (author)

  20. Inventory of future power and heat production technologies. Partial report Boilers/Combustion/Steam cycle for district heating and cogeneration; Inventering av framtidens el- och vaermeproduktionstekniker. Delrapport Pannor/Foerbraenning/Aangcykel foer fjaerrvaerme och kraftvaerme

    Energy Technology Data Exchange (ETDEWEB)

    Schuster, Robert (AaF Process, Stockholm (Sweden))

    2008-12-15

    The energy market of today is turbulent and it is quite clear that big changes in the consumption pattern are going to occur, due to the expansion in Asia and the expected Climate Change. The EU has, as a first step, stated in a directive that the consumption of renewable energy in the heat and power sector should be increased to 20 % and in the transportation sector to 10 % by the year 2020, a target which is high above current levels in most of the EU countries. It is reasonable to believe the European demand of renewable energy will create a shortage of biomass and that the development and use of technology for energy production will therefore not only depend on what is technically possible. One scenario is that biomass is mainly used for the markets that have very few alternatives, such as the transportation sector and small scale CHP units. We have today a relatively high electrical consumption through a stable grid and district heating nets in almost all densely populated areas. Large high efficiency power plants combined with heat pump technology will probably prevent any significant expansion of the district heating nets. A third major net for gas distribution seems not to be a feasible solution. Local nets for production of biogas from wet waste for different purposes, including EvGT units with 55% efficiency may however be good solution for some areas. There are a number of cycles and technical solutions to increase the electrical efficiency which could be applied also on smaller plants. The total efficiency will however not increase, only the el/heat ratio and it is not obvious that the higher investment cost for indirect cycles, bottom cycles or extreme steam data in combination with the risk of lower availability is a feasible solution. Especially waste to energy plants, with their need of high utilisation time, are sensitive to long production interruptions. The existing heat sinks in Sweden will however be efficiently used for electrical production

  1. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    .g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  2. Effect of oxygen partial pressure on production of animal virus (VSV)

    OpenAIRE

    Lim, Hyun S.; Chang, Kern H.; Kim, Jung H.

    1999-01-01

    The effect of oxygen partial pressure on viral replication was investigated with Vero/VSV system. At 10% oxygen partial pressure in spinner culture, VSV titer was significantly increased 130 fold compared to that obtained at 21%. A similar result was obtained for viral production in 1liter bioreactor. This implies that oxygen partial pressure during viral production has to be low. In low oxygen partial pressure, malondialdehyde concentration was decreased about 5 fold. Thus, low oxygen partia...

  3. Biogas Production: Microbiology and Technology.

    Science.gov (United States)

    Schnürer, Anna

    Biogas, containing energy-rich methane, is produced by microbial decomposition of organic material under anaerobic conditions. Under controlled conditions, this process can be used for the production of energy and a nutrient-rich residue suitable for use as a fertilising agent. The biogas can be used for production of heat, electricity or vehicle fuel. Different substrates can be used in the process and, depending on substrate character, various reactor technologies are available. The microbiological process leading to methane production is complex and involves many different types of microorganisms, often operating in close relationships because of the limited amount of energy available for growth. The microbial community structure is shaped by the incoming material, but also by operating parameters such as process temperature. Factors leading to an imbalance in the microbial community can result in process instability or even complete process failure. To ensure stable operation, different key parameters, such as levels of degradation intermediates and gas quality, are often monitored. Despite the fact that the anaerobic digestion process has long been used for industrial production of biogas, many questions need still to be resolved to achieve optimal management and gas yields and to exploit the great energy and nutrient potential available in waste material. This chapter discusses the different aspects that need to be taken into consideration to achieve optimal degradation and gas production, with particular focus on operation management and microbiology.

  4. TECHNOLOGICAL LEVEL OF PRODUCTION OF RUSSIAN ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Galina S. Sagieva

    2015-01-01

    Full Text Available The article presents an analysis of the technological level of production of Russian organizations. Areas of study cover the characteristics of the use of technology in manufacturing (the extent of use and level of technology, the problems solved by using specific types of technologies and the use in the production process of intellectual property; factors driving growth of technological level of the surveyed medium and large organizations and provides them with a competitive advantage

  5. NASA Technologies for Product Identification

    Science.gov (United States)

    Schramm, Fred, Jr.

    2006-01-01

    Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture called NanocodesTM that can be converted to a Data Matrix. The accompanying intellectual property is protected by 10 patents, several of which are licensed. Direct marking Data Matrix on NASA parts virtually eliminates data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection. This presentation highlights the accomplishments of NASA in its efforts to develop

  6. Technological measures to improve automotive product quality

    OpenAIRE

    Gladkov, V.; Kruglov, S.

    2010-01-01

    The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

  7. IEA Energy Technology Essentials: Biofuel Production

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-01-15

    The IEA Energy Technology Essentials series offers concise four-page updates on the different technologies for producing, transporting and using energy. Biofuel Production is the topic covered in this edition.

  8. Technology Management within Product Lines in High Technology Markets

    Science.gov (United States)

    Sarangee, Kumar R.

    2009-01-01

    Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

  9. Production of reduction gases: partial oxidation of hydrocarbons and coal

    Energy Technology Data Exchange (ETDEWEB)

    Tippmer, K

    1976-04-01

    After some general remarks on reduction gas and quality demands, the Texaco process of partial oxidation with scrubbing is dealt with. A comparison of current iron-sponge techniques shows that a heat demand below 3 M kcal/t Fe should be envisaged, which means that heavy fuel oil or coal should be used. The special features of oxygen generation, coal processing, demands made on fuel oil, gasoline, and natural gas, gas generation, soot recovery, hydrogen sulphide-carbon dioxide scrubbing, system Benfield HP process, recycle-carbon dioxide scrubbing, auxiliary steam system, gas preheating, recycle gas cooling and compression, process data and heat balances for natural gas (one-heat system) and heating fuel oil or naphtha (two-heat system) are given.

  10. The relation between in vivo ethylene production and oxygen partial pressure

    NARCIS (Netherlands)

    Sanders, M.G.; Wild, de H.P.J.

    2003-01-01

    Modelling in vivo ethylene production rate in relation to O2 partial pressure was used to improve understanding of enzyme kinetics of 1-aminocyclopropane-1-carboxylate oxidase (ACC oxidase). Tomato fruit were stored in an extensive range of O2 partial pressures at 8, 13 and 18 °C. Ethylene

  11. New technologies and electricity production

    International Nuclear Information System (INIS)

    Pantoja Lopez, A.

    1993-01-01

    This paper presents a general overview about the new electrical energy generation technologies, under development, in some cases with the spanish electrical utilities cooperation. The content has a brief introductory description about the highly changing scenario for the utilities, the most promising generation technologies from the point of view of efficiency, cost investment, and minimum environmental impact, and the main actions included in the Spanish Energetic Research Plan (PEN-91-2000). After a short presentation for the advanced clean coal technologies, as PFC,IGCC, fuel cells and MHD, as well as some ongoing research projects, it has been included a group of nuclear and renewable energy generation technologies and the main environmental control technologies, all of them with great interest for the near term electric utilities power generation. (Author)

  12. Integrative production technology theory and applications

    CERN Document Server

    Özdemir, Denis

    2017-01-01

    This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

  13. New Production Technologies and Traffic

    Directory of Open Access Journals (Sweden)

    Livij Jakomin

    2012-10-01

    Full Text Available Today the modern production includes the following principles:liT (Just-in-Time, FMS (Flexible Manufacturing System,EOS (Economies of Scope, R&D (Research and Development,and increasingly present Lean Production.This article ana(vses how the mentioned principles, characteristicfor the production sphere, get integrated in the field oftraffic.

  14. Production and partial purification of glucoamylase from Aspergillus ...

    African Journals Online (AJOL)

    Glucoamylase is an enzyme that hydrolyses 1,4α and 1,6β-glucosidic linkages in polysaccharides yielding glucose. Aspergillus niger strains 1, 2 and 3 were locally isolated from cassava peel dumpsite for the production of glucoamylase enzyme. A. niger strains 1, 2 and 3 were screened for their hyper producing ability on ...

  15. The develop of technology production in Spain

    International Nuclear Information System (INIS)

    Fernandez Labastida, J. M.

    2007-01-01

    Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

  16. Continuous Partial Attention as a Problematic Technology Use: A Case Of Educators

    Directory of Open Access Journals (Sweden)

    Dr. Mehmet Firat

    2013-07-01

    Full Text Available Continuous Partial Attention is a current concept open to research which, besides multitasking, intensely occupies the agenda of education, communication and cognitive psychology. The purpose of the present study was to determine educators’ continuous partial attention. In line with this purpose, the research data were collected from 109 educators in higher education from different age groups and from four different countries with the use of a questionnaire made up of two sections and seven questions. The findings obtained in the study revealed that the educators’ Continuous Partial Attention did not significantly differ with respect to their technology use efficacies, their ages or their countries. In addition, it was found out that the educators’ Continuous Partial Attention differed statistically significantly depending on the fields they worked in. Based on this, it could be stated that educators working in the field of educational technologies encounter with Continuous Partial Attention more frequently than educators working in other fields. At the end of the study, several suggestions were put forward.

  17. Partial dissociative emission cross sections and product state distributions of the resulting photofragments

    Energy Technology Data Exchange (ETDEWEB)

    Picconi, David; Grebenshchikov, Sergy Yu., E-mail: Sergy.Grebenshchikov@ch.tum.de

    2016-12-20

    This paper relates the partial cross section of a continuous optical emission into a given scattering channel of the lower electronic state to the photofragment population. This allows one to infer partial emission cross sections ‘non-optically’ from product state distributions; in computations, explicit construction of exact scattering states is therefore avoided. Applications to the emission spectra of NaI, CO{sub 2}, and pyrrole are given. It is also demonstrated that a similar relationship holds between partial cross sections of dissociative photoionization and distributions of ionic fragments over final product channels.

  18. 9 CFR 381.150 - Requirements for the production of fully cooked poultry products and partially cooked poultry...

    Science.gov (United States)

    2010-01-01

    ... fully cooked poultry products and partially cooked poultry breakfast strips. 381.150 Section 381.150... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Entry of Articles Into Official Establishments; Processing...

  19. Value analysis for advanced technology products

    Science.gov (United States)

    Soulliere, Mark

    2011-03-01

    Technology by itself can be wondrous, but buyers of technology factor in the price they have to pay along with performance in their decisions. As a result, the ``best'' technology may not always win in the marketplace when ``good enough'' can be had at a lower price. Technology vendors often set pricing by ``cost plus margin,'' or by competitors' offerings. What if the product is new (or has yet to be invented)? Value pricing is a methodology to price products based on the value generated (e.g. money saved) by using one product vs. the next best technical alternative. Value analysis can often clarify what product attributes generate the most value. It can also assist in identifying market forces outside of the control of the technology vendor that also influence pricing. These principles are illustrated with examples.

  20. HTTR workshop (workshop on hydrogen production technology)

    International Nuclear Information System (INIS)

    Shiina, Yasuaki; Takizuka, Takakazu

    2004-12-01

    Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

  1. TECHNOLOGY OF THERMOPLASTIC STARCH PRODUCTION

    Directory of Open Access Journals (Sweden)

    N. D. Lukin

    2015-01-01

    Full Text Available In recent years, the manufacturing of bio-recyclable polymer products, which production and consumption has become an efficient way to protect environment from solid wastes in different countries of the world. The issue of environmental protection becomes global and the rapid growth of synthetic plastics application in many industries is a serious concern. There is a important task to improve the quality, safety and durability of products as well as their utilization after the expiration period. One of the most acceptable ways to solve these issues is to produce biodegradable materials based on natural materials, which are not harmful for environment and human health. A very common and effective method to give biological degradability to synthetic polymers is to insert starch into polymer composition in combination with other ingredients.

  2. The method of manufacture of nylon dental partially removable prosthesis using additive technologies

    Science.gov (United States)

    Kashapov, R. N.; Korobkina, A. I.; Platonov, E. V.; Saleeva, G. T.

    2014-12-01

    The article is devoted to the topic of creating new methods of dental prosthesis. The aim of this work is to investigate the possibility of using additive technology to create nylon prosthesis. As a result of experimental studies, was made a sample of nylon partially removable prosthesis using 3D printing has allowed to simplify, accelerate and reduce the coat of manufacturing high-precision nylon dentures.

  3. Partial sums of lagged cross-products of AR residuals and a test for white noise

    NARCIS (Netherlands)

    de Gooijer, J.G.

    2008-01-01

    Partial sums of lagged cross-products of AR residuals are defined. By studying the sample paths of these statistics, changes in residual dependence can be detected that might be missed by statistics using only the total sum of cross-products. Also, a test statistic for white noise is proposed. It is

  4. Cleaner production technology for the NDT industry

    International Nuclear Information System (INIS)

    Relunia, Estrella D.; Mateo, Alejandro J.

    2001-01-01

    This paper discusses te wastes generated from the conduct of nondestructive testing (NDT) techniques and operations like NDT film processing and the systems to reduce water pollution and the film system quality control. Discussions on clean technology production concepts and philosophy is also discussed. A case study on cleaner production technology where a process and equipment modifications and a product substitution were implemented is presented. The equipment modification and product substitution eliminated the use of 1,1,1-trichloroethane in its cleaning operation. (Author)

  5. Wood fuel production technologies in EU countries

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, P [Finnish Forest Research Institute, Vantaa (Finland)

    1998-12-31

    The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

  6. Wood fuel production technologies in EU countries

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, P. [Finnish Forest Research Institute, Vantaa (Finland)

    1997-12-31

    The presentation reviews the major technologies used for the production of fuel chips for heating plants in Europe. Three primary options are considered: production of whole-tree chips from young trees for fuel; integrated harvesting of fiber and energy from thinning based on tree-section system; and production of fuel chips from logging residue in clear-cut areas after fully mechanized logging. The characteristics of the available biomass reserve and proven technology for its recovery are discussed. The employment effects of fuel chip production and the costs of wood fuels are also briefly discussed. (author) 3 refs., 3 figs.

  7. Product Lifecycle Management Centre of Technology

    CSIR Research Space (South Africa)

    Barnard, Rentia

    2017-10-01

    Full Text Available - Rentia Barnard.pdf.txt Content-Type text/plain; charset=UTF-8 1 Interactive activities Contents Product Lifecycle Management Centre of Technology Rentia Barnard National Industrialisation Support Initiative (NISI) 3 Initiative (NISI...

  8. Effectiveness of technological options for minimising production ...

    African Journals Online (AJOL)

    Farmer perceptions of technology effectiveness, to some extent, agreed with econometric evidence from this study. Study results have two implications: firstly, the need to develop and disseminate location specific adaptation technologies to reduce production risks, instead of blanket recommendations of similar adaptation ...

  9. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  10. Technology's Impact on Production

    Energy Technology Data Exchange (ETDEWEB)

    Rachel Amann; Ellis Deweese; Deborah Shipman

    2009-06-30

    As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

  11. Wood for energy production. Technology - environment - economy

    International Nuclear Information System (INIS)

    Serup, H.; Falster, H.; Gamborg, C.

    1999-01-01

    'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

  12. Wood for energy production. Technology - environment - economy

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others

    1999-10-01

    `Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

  13. Technical Integration of Nuclear Hydrogen Production Technology

    International Nuclear Information System (INIS)

    Lee, Ki Young; Chang, J. H.; Park, J. K.

    2007-06-01

    These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production system, and the assessment of the nuclear hydrogen production economy. To estimate the attainments of the key technologies in progress with the performance goals of GIF, itemized are the attainment indices based on SRP published in VHTR R and D steering committee of Gen-IV. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items conformed to the NHDD concepts established in a preconceptual design in 2005. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

  14. Reforming technology for syngas production

    International Nuclear Information System (INIS)

    Epstein, M.

    1997-01-01

    Methane forming reactions using either steam or CO 2 have been known to industry for a long time. These endothermic reactions require the investment of a relatively large amount of energy. German researchers, in the 1970's, conceived and developed the idea to use this reaction and the reverse methanation reaction in a closed loop for the transportation and distribution of nuclear heat. The idea was also adopted for use with solar energy as a heat source. Utilizing solar energy as the heat source, the Weismann Institute of Science has fabricated, installed and operated a complete loop capable of the conversion and transportation of over 400 kW of heat. This system can be operated with a wide range of CO 2 /H 2 O/CH 4 feed mixtures. Steam reforming is the common reforming reaction in the ''open loop'' mode for the purpose of synthesis gas production. This is accomplished with a large excess of steam on a nickel catalyst. However, it has only recently been recognized that there is also a substantial market for CO 2 reforming. The CO 2 /CH 4 mixture in various proportions exists in many places and has, so far, not been used efficiently. The sources for this mixture are biogas produced in anaerobic digestion processes and gas resources such as the NATUNA gas field in Indonesia, and many others. Therefore, the system of CO 2 /CH 4 deserves more attention. Commercial catalysts used for steam reforming based on nickel are not suitable for this system. Therefore, other catalysts based on Rhodium and Ruthenium have been developed and some performance data is presented in this paper. Also presented is a conceptual schematic layout of a CO 2 reforming plant and matching methanator. A computer code for a detailed design of the entire loop in a commercial size system has been prepared where optimized operational conditions as well as equipment parameters can be determined. (author). 3 figs, 3 tabs

  15. Current biodiesel production technologies: A comparative review

    International Nuclear Information System (INIS)

    Abbaszaadeh, Ahmad; Ghobadian, Barat; Omidkhah, Mohammad Reza; Najafi, Gholamhassan

    2012-01-01

    Highlights: ► In this paper we review the technologies related to biodiesel production. ► 4 Primary approaches reviewed are direct use and blending of oils, micro-emulsions, pyrolysis and transesterification method. ► Both advantages and disadvantages of the different biodiesel production methods are also discussed. ► The most common technology of biodiesel production is transesterification of oils. ► Selection of a transesterification method depends on the amount of FFA and water content of the feedstock. - Abstract: Despite the high energy demand in the industrialized world and the pollution problems caused by widespread use of fossil fuels, the need for developing renewable energy sources with less environmental impacts are increasing. Biodiesel production is undergoing rapid and extensive technological reforms in industries and academia. The major obstacle in production and biodiesel commercialization path is production cost. Thus, in previous years numerous studies on the use of technologies and different methods to evaluate optimal conditions of biodiesel production technically and economically have been carried out. In this paper, a comparative review of the current technological methods so far used to produce biodiesel has been investigated. Four primary approaches to make biodiesel are direct use and blending of vegetable oils, micro-emulsions, thermal cracking (pyrolysis) and transesterification. Transesterification reaction, the most common method in the production of biodiesel, is emphasized in this review. The two types of transestrification process; catalytic and non-catalytic are discussed at length in the paper. Both advantages and disadvantages of the different biodiesel production methods are also discussed.

  16. Technology diffusion, product differentiation and environmental subsidies

    Energy Technology Data Exchange (ETDEWEB)

    McGinty, M. [Univ. of Wisconsin, Milwaukee, WI (United States). Dept. of Economics; Vries, F.P. de [Univ. of Groningen (Netherlands). Dept. of Law and Economics

    2007-07-01

    Technological change is often seen as the promising device that will mitigate or solve environmental problems. Policy intervention that spurs the development, adoption and diffusion of new, environmentally benign technologies therefore holds great appear for environmental authorities. Policymakers have various instruments at their disposal to affect technological diffusion, ranging from direct regulation (command-and-control strategies) to market-based instruments, such as taxes, subsidies and tradable pollution permits. This paper examines environmental subsidies as a technology diffusion policy. The authors apply evolutionary game theory to explore the relationship between subsidies for clean technology, the diffusion of that technology and the degree of product differentiation in an imperfectly competitive market. They show that the subsidy succeeds in reducing environmental damage only when the substitution effect (the reduction in pollution associated with the clean technology) exceeds the output effect (the extent that the subsidy increases output). When the substitution effect does dominate, environmental damage decreases monotonically during the diffusion process. The extent of diffusion (the degree to which clean technolgy replaces dirty) and the likelihood that the substitution effect will dominate both decrease with the extent of product differentiation. Finally, the subsidy for clean technology will spill over to the remaining dirty producers increasing their profit as well.

  17. Experimental and simulation analysis of hydrogen production by partial oxidation of methanol

    Energy Technology Data Exchange (ETDEWEB)

    Sikander, U. [National Univ. of Science and Technology, Islamabad (Pakistan)

    2014-10-15

    Partial oxidation of methanol is the only self-sustaining process for onboard production of hydrogen. For this a fixed bed catalytic reactor is designed, based on heterogeneous catalytic reaction. To develop an optimized process, simulation is carried out using ASPEN HYSYS v 7.1. Reaction kinetics is developed on the basis of Langmuir Hinshel wood model. 45:55:5 of CuO: ZnO: Al/sub 2/O/sub 3/ is used as a catalyst. Simulation results are studied in detail to understand the phenomenon of partial oxidation of methanol inside the reactor. An experimental rig is developed for hydrogen production through partial oxidation of methanol. Results obtained from process simulation and experimental work; are compared with each other. (author)

  18. 76 FR 76937 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting-Room Change

    Science.gov (United States)

    2011-12-09

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting--Room Change The Emerging Technology and Research Advisory... emerging technology and research activities, including those related to deemed exports. Agenda Wednesday...

  19. Marketing mix for consumer high technology products

    Directory of Open Access Journals (Sweden)

    Dovleac, L.

    2012-01-01

    Full Text Available This paper includes an analysis upon the variables of marketing mix for high technology products used for individual consumption. There are exposed the essential aspects related to marketing policies and strategies used by high technology companies for providing consumers the best solutions tailored to their needs. A special attention is given to the necessity for inclusion in the marketing mix of the fifth element – the assistance and informational support for customers.

  20. Improved 64-bit Radix-16 Booth Multiplier Based on Partial Product Array Height Reduction

    DEFF Research Database (Denmark)

    Antelo, Elisardo; Montuschi, Paolo; Nannarelli, Alberto

    2016-01-01

    , a reduction of one unit in the maximum height is achieved. This reduction may add flexibility during the design of the pipelined multiplier to meet the design goals, it may allow further optimizations of the partial product array reduction stage in terms of area/delay/power and/or may allow additional addends...

  1. Acidogenesis driven by hydrogen partial pressure towards bioethanol production through fatty acids reduction

    International Nuclear Information System (INIS)

    Sarkar, Omprakash; Butti, Sai Kishore; Venkata Mohan, S.

    2017-01-01

    H 2 partial pressure drives the reduction of carboxylic acid (short chain fatty acids) formed as primary metabolites in acidogenic fermentation to form bioalcohols. Microbial catalysis under the influence of H 2 partial pressure was evaluated in comparison with a reactor operated at atmospheric pressure under identical conditions. Carboxylic acid reduction gets regulated selectively by the influence of elevated pressures and redox conditions, resulting in the formation of alcohols. The non-equilibrium of the intra and extracellular H 2 ions causes the anaerobic bacteria to alter their pathways as a function of interspecies H 2 transfer. Ethanol production was quantified, as acetic acid was the major carboxylic acid synthesised during acidogenesis. H 2 pressure influenced the electrochemical activity which was reflected in the distinct variation of the electron transfer rates and the catalytic activity of redox mediators (NAD + /NADH, flavoproteins and iron-sulphur clusters). The bioprocess depicted in this communication depicted a non-genetic regulation of product formation, understanding the acidogenic metabolism and alternate route for alcohol production. - Highlights: • H 2 partial pressure in HPR aided in the reduction of carboxylic acids to alcohols. • Production and consumption rate of VFAs were correlating with alcohol formation. • Metabolic shift was evident with bioelectrochical analysis. • NADH/NAD + ratio and H 2 partial pressure coupled in enhanced solventogenesis.

  2. A Label Correcting Algorithm for Partial Disassembly Sequences in the Production Planning for End-of-Life Products

    Directory of Open Access Journals (Sweden)

    Pei-Fang (Jennifer Tsai

    2012-01-01

    Full Text Available Remanufacturing of used products has become a strategic issue for cost-sensitive businesses. Due to the nature of uncertain supply of end-of-life (EoL products, the reverse logistic can only be sustainable with a dynamic production planning for disassembly process. This research investigates the sequencing of disassembly operations as a single-period partial disassembly optimization (SPPDO problem to minimize total disassembly cost. AND/OR graph representation is used to include all disassembly sequences of a returned product. A label correcting algorithm is proposed to find an optimal partial disassembly plan if a specific reusable subpart is retrieved from the original return. Then, a heuristic procedure that utilizes this polynomial-time algorithm is presented to solve the SPPDO problem. Numerical examples are used to demonstrate the effectiveness of this solution procedure.

  3. Product with service, technology with business model

    DEFF Research Database (Denmark)

    Sakao, Tomohiko; McAloone, Tim C.

    2011-01-01

    Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

  4. Educational Applications for Blind and Partially Sighted Pupils Based on Speech Technologies for Serbian

    Science.gov (United States)

    Lučić, Branko; Ostrogonac, Stevan; Vujnović Sedlar, Nataša; Sečujski, Milan

    2015-01-01

    The inclusion of persons with disabilities has always represented an important issue. Advancements within the field of computer science have enabled the development of different types of aids, which have significantly improved the quality of life of the disabled. However, for some disabilities, such as visual impairment, the purpose of these aids is to establish an alternative communication channel and thus overcome the user's disability. Speech technologies play the crucial role in this process. This paper presents the ongoing efforts to create a set of educational applications based on speech technologies for Serbian for the early stages of education of blind and partially sighted children. Two educational applications dealing with memory exercises and comprehension of geometrical shapes are presented, along with the initial tests results obtained from research including visually impaired pupils. PMID:26171422

  5. Educational Applications for Blind and Partially Sighted Pupils Based on Speech Technologies for Serbian.

    Science.gov (United States)

    Lučić, Branko; Ostrogonac, Stevan; Vujnović Sedlar, Nataša; Sečujski, Milan

    2015-01-01

    The inclusion of persons with disabilities has always represented an important issue. Advancements within the field of computer science have enabled the development of different types of aids, which have significantly improved the quality of life of the disabled. However, for some disabilities, such as visual impairment, the purpose of these aids is to establish an alternative communication channel and thus overcome the user's disability. Speech technologies play the crucial role in this process. This paper presents the ongoing efforts to create a set of educational applications based on speech technologies for Serbian for the early stages of education of blind and partially sighted children. Two educational applications dealing with memory exercises and comprehension of geometrical shapes are presented, along with the initial tests results obtained from research including visually impaired pupils.

  6. Cost and benefit estimates of partially-automated vehicle collision avoidance technologies.

    Science.gov (United States)

    Harper, Corey D; Hendrickson, Chris T; Samaras, Constantine

    2016-10-01

    Many light-duty vehicle crashes occur due to human error and distracted driving. Partially-automated crash avoidance features offer the potential to reduce the frequency and severity of vehicle crashes that occur due to distracted driving and/or human error by assisting in maintaining control of the vehicle or issuing alerts if a potentially dangerous situation is detected. This paper evaluates the benefits and costs of fleet-wide deployment of blind spot monitoring, lane departure warning, and forward collision warning crash avoidance systems within the US light-duty vehicle fleet. The three crash avoidance technologies could collectively prevent or reduce the severity of as many as 1.3 million U.S. crashes a year including 133,000 injury crashes and 10,100 fatal crashes. For this paper we made two estimates of potential benefits in the United States: (1) the upper bound fleet-wide technology diffusion benefits by assuming all relevant crashes are avoided and (2) the lower bound fleet-wide benefits of the three technologies based on observed insurance data. The latter represents a lower bound as technology is improved over time and cost reduced with scale economies and technology improvement. All three technologies could collectively provide a lower bound annual benefit of about $18 billion if equipped on all light-duty vehicles. With 2015 pricing of safety options, the total annual costs to equip all light-duty vehicles with the three technologies would be about $13 billion, resulting in an annual net benefit of about $4 billion or a $20 per vehicle net benefit. By assuming all relevant crashes are avoided, the total upper bound annual net benefit from all three technologies combined is about $202 billion or an $861 per vehicle net benefit, at current technology costs. The technologies we are exploring in this paper represent an early form of vehicle automation and a positive net benefit suggests the fleet-wide adoption of these technologies would be beneficial

  7. Development of hydrogen production technology using FBR

    International Nuclear Information System (INIS)

    Ono, Kiyoshi; Otaki, Akira; Chikazawa, Yoshitaka; Nakagiri, Toshio; Sato, Hiroyuki; Sekine, Takashi; Ooka, Makoto

    2004-06-01

    This report describes the features of technology, the schedule and the organization for the research and development regarding the hydrogen production technology using FBR thermal energy. Now, the hydrogen production system is proposed as one of new business models for FBR deployment. This system is the production of hydrogen either thermal energy at approximately from 500degC to 550degC or electricity produced by a sodium cooled FBR. Hydrogen is expected to be one of the future clean secondary energies without carbon-dioxide emission. Meanwhile the global energy demand will increase, especially in Asian countries, and the energy supply by fossil fuels is not the best choice considering the green house effect and the stability of energy supply. The development of the hydrogen technology using FBR that satisfies 'sustainable energy development' and 'utilization of energies free from environmental pollution' will be one of the promising options. Based on the above mentioned recognition, we propose the direction of the development, the issues to be solved, the time schedule, the budget, and the organization for R and D of three hydrogen production technologies, the thermochemical hybrid process, the low temperature steam reforming process, and the high temperature steam electrolysis process in JNC. (author)

  8. Secondary Products (Markets, Competition, and Technological Improvements)

    Science.gov (United States)

    Philip A. Araman

    1988-01-01

    Competitiveness, imports, exports, and technological improvements--these are issues facing secondary wood-product manufacturers. The major problems focus on increasing foreign imports and the inability of U.S. industries to repell the imports. How and where should we, as researchers, allocate our efforts to enhance the competitiveness of secondary forest industries in...

  9. Utilization of cocoyam production technologies among women ...

    African Journals Online (AJOL)

    The study analysed utilization of improved cocoyam production technologies among women in Abia State, Nigeria. A multistage random sampling technique was used to select sixty (60) women. Data for the study were collected using a structured questionnaire and analysed with descriptive statistics and inferential statistics ...

  10. Technologies for production of electrticity or heat

    International Nuclear Information System (INIS)

    Schleisner, L.

    1990-03-01

    In connection with the production of ''Energi 2000 - Handlingsplan for en baeredygtig udvikling'' (Energy 2000 - Plan of Management for a Sustaniable Development) a summary and evaluation of various electric power and heat production technolgies was produced. Technologies in relation to fusion, wind energy, solar energy, wave energy, heat storage, electric power storage and hydrogen are dealt with. In each case a description of the technological development in the relevant field, also in relation to long (2030), middle (2015) and short term (2000) commercial aspects, is given. The technology is also explained in relation to energy and socio-economical aspects. The consequences of the utilization of the mentioned technologies with regard to the total energy and electric power systems and aspects of Danish industrial policy are considered. Suggestions are presented as to future subjects for research and development in relation to each technology. A number of these technologies are not yet used commercially. The descriptions are thus given on the basis of development on a global basis. (author) 32 tabs., 31 ills., 19 refs

  11. Solar driven technologies for hydrogen production

    Directory of Open Access Journals (Sweden)

    Medojević Milovan M.

    2016-01-01

    Full Text Available Bearing in mind that the production of hydrogen based on renewable energy sources, without doubt, is an important aspect to be taken into account when considering the potential of this gas, where as particularly interesting technologies stand out the ones which are based on the use of solar energy to produce hydrogen. The goal of this paper provides basic technological trajectories, with the possibility of combining, for solar driven hydrogen production, such as: electrochemical, photochemical and thermochemical process. Furthermore, the paper presents an analysis of those technologies from a technical as well as economic point of view. In addition, the paper aims to draw attention to the fact that the generation of hydrogen using renewable energy should be imposed as a logical and proper way to store solar energy in the form of chemical energy.

  12. Radiation technology of improved quality materials production

    International Nuclear Information System (INIS)

    Zajkin, Yu.A.; Nadirov, N.K.; Zajkina, R.F.

    1997-01-01

    The technology of materials production from metals and alloys with high operational properties is developed. The technology is based on use of radiation methods in powder metallurgy. Use of radiation processing allows to improve technological conditions of sintering. It is established, that in certain regimes the sintering temperature is decreasing from 1200 deg C up to 950 deg C in the result of radiation processing of stainless steel powders . According to the processing regimes it is possible load reduction by powder pressing on 15-20 % and sintering time in to 1,5 - 2 times . The radiation methods give possibility to produce high qualitative goods from cheap powder materials without use energy-intensive processes and prolonged processing of finished products

  13. Development of RI Target Production Technology

    International Nuclear Information System (INIS)

    Jeong, Do Young; Ko, Kwang Hoon; Kim, Cheol Jung; Kim, Taek Soo; Rho, Si Pyo; Park, Hyun Min; Lim, Gwon; Cha, Yong Ho; Han, Jae Min

    2010-04-01

    This project was accomplished with an aim of productive technical development on the 'enriched target' which is used essentially in radioisotope production. The research was advanced systematically with target production pilot system configuration and core technical development. We composed Yb-176 productive pilot system which equip the chemical purification technique of medical treatment level and proved its capability. Possibilities to separate Zn-67 by the method of using the polarizing light in principle and to separate Zn-70 by the method of using the double optical pumping in theory were also proved. RI target production technologies are recognized excessively with monopolistic techniques of part atomic energy advanced nations such as Russia and US and they are come, but we prepared the opportunity will be able to complete a full cycle of like (RI material production -> RI target production -> RI application) with this project accomplishment. When considering only the direct demand of stable isotope which is used in various industrial, we forecast with the fact that RI target markets will become larger with the approximately 5 billion dollars in 2020 and this technology will contribute in the domestic rising industry creation with high value added

  14. Inventory of future power and heat production technologies. Partial report Gasification with gas turbine/engine for power plants; Incl. English lang. appendix of 24 p. titled 'Status of large-scale biomass gasification for power production'; Inventering av framtidens el och vaermeproduktionstekniker. Delrapport Foergasning med gasturbin/motor foer kraftvaerk

    Energy Technology Data Exchange (ETDEWEB)

    Waldheim, Lars; Larsson, Eva K [TPS Termiska Processer, Nykoeping (Sweden)

    2008-12-15

    contract problems and a number of projects in Holland, Italy and Brazil never got to a construction phase. Indirect co-firing has been realised in a few plants where a CFB gasifier is combined with some cooling and cyclone particle removal. If gas cleaning before firing can be achieved, the technology is believed to have a bigger potential. That would mean that waste fuel or other fuels with high chlorine content can be used, and also that the treated gas can be used in an incineration plant without limiting the superheater temperature to the low levels, in relation to power plant boilers, that is used in waste boilers. This means that both the efficiency to electricity and the ratio between electricity and heat production can be increased, in relation to waste incineration. Improvements in performance during the time period in question require that initiatives are taken and that e.g. gas turbine manufacturers participate actively. The probability for this development is more difficult to assess. For BIG-ICE, the technology is assessed to reach 35-40 % electricity efficiency at the end of the period, i.e. 2025-2030, and the investment cost for bigger plants can be just below that of comparable conventional steam plants, perhaps 3 000 Euro/kWe for a complete plant. Completely commercial technology can be expected at the beginning of the 2020's. For BIG-CC the corresponding assessment is 45-50 % and 2500-3000 Euro/kWe. The route to commercial technology is longer in this case and plants on near commercial conditions cannot be expected until the end of the 2020's. For indirect co-firing it is a fact that lime kiln gasifiers and the gasifiers in Lahti, Ruien and Getruidenberg, without extensive gas cleaning, are in a commercial scale and that years of operation experiences already have been earned, also with waste fuels. The energy conversion to electricity uses existing infrastructure and therefore the adoption requirements are very limited. What remains to be demonstrated is

  15. Inventory of future power and heat production technologies. Partial report Gasification with gas turbine/engine for power plants; Incl. English lang. appendix of 24 p. titled 'Status of large-scale biomass gasification for power production'; Inventering av framtidens el och vaermeproduktionstekniker. Delrapport Foergasning med gasturbin/motor foer kraftvaerk

    Energy Technology Data Exchange (ETDEWEB)

    Waldheim, Lars; Larsson, Eva K. (TPS Termiska Processer, Nykoeping (Sweden))

    2008-12-15

    operation because of contract problems and a number of projects in Holland, Italy and Brazil never got to a construction phase. Indirect co-firing has been realised in a few plants where a CFB gasifier is combined with some cooling and cyclone particle removal. If gas cleaning before firing can be achieved, the technology is believed to have a bigger potential. That would mean that waste fuel or other fuels with high chlorine content can be used, and also that the treated gas can be used in an incineration plant without limiting the superheater temperature to the low levels, in relation to power plant boilers, that is used in waste boilers. This means that both the efficiency to electricity and the ratio between electricity and heat production can be increased, in relation to waste incineration. Improvements in performance during the time period in question require that initiatives are taken and that e.g. gas turbine manufacturers participate actively. The probability for this development is more difficult to assess. For BIG-ICE, the technology is assessed to reach 35-40 % electricity efficiency at the end of the period, i.e. 2025-2030, and the investment cost for bigger plants can be just below that of comparable conventional steam plants, perhaps 3 000 Euro/kWe for a complete plant. Completely commercial technology can be expected at the beginning of the 2020's. For BIG-CC the corresponding assessment is 45-50 % and 2500-3000 Euro/kWe. The route to commercial technology is longer in this case and plants on near commercial conditions cannot be expected until the end of the 2020's. For indirect co-firing it is a fact that lime kiln gasifiers and the gasifiers in Lahti, Ruien and Getruidenberg, without extensive gas cleaning, are in a commercial scale and that years of operation experiences already have been earned, also with waste fuels. The energy conversion to electricity uses existing infrastructure and therefore the adoption requirements are very limited. What

  16. Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

  17. Nondestructive quality evaluation technology of agricultural products

    International Nuclear Information System (INIS)

    Noh, Sang Ha

    1997-01-01

    Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

  18. Whole- and partial-body cryostimulation/cryotherapy: Current technologies and practical applications.

    Science.gov (United States)

    Bouzigon, Romain; Grappe, Frederic; Ravier, Gilles; Dugue, Benoit

    2016-10-01

    Cold therapy is commonly used as a method to relieve pain and inflammation. This review focuses primarily on two methods of cold therapy that have received recent attention: whole-body cryotherapy and partial-body cryotherapy. These methods are used to induce physiological and psychological benefits in humans in the context of medicine, health and sports. The subjects experiencing cryotherapy are dressed in minimal clothing and are exposed to very cold air (at -110°C or less) for 1-4min. Despite the increasing scientific interest in these methods, there is a lack of information about the technologies used. Moreover, there is no existing reference concerning exposure protocols and the relationship between temperature, duration, number of repetitions and the treatments' desired effects. The aim of this review is to compare whole- and partial-body cryotherapy effects (especially on skin temperature) and to classify the protocols for exposure according to the desired effects. This review emphasises 1) the lack of information concerning the actual temperatures inside the cabin or chamber during exposure and 2) the heterogeneity among the exposure protocols that have been reported in the scientific literature. This review will be valuable and relevant to health professionals endeavouring to optimize the cold treatments offered to patients and producers of cryotherapy apparatus striving to create more efficient devices that meet market requirements. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. [Computer aided design for fixed partial denture framework based on reverse engineering technology].

    Science.gov (United States)

    Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

    2006-03-01

    To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

  20. Developing Technology Products - A Physicist's Perspective

    Science.gov (United States)

    Burka, Michael

    2014-03-01

    There are many physicists working in the industrial sector. We rarely have the word physicist in our job title; we are far more commonly called engineers or scientists. But, we are physicists, and we succeed because our training in physics has given us the habits of mind and the technical skills that one needs to solve complex technical challenges. This talk will explore the transition from physics research to technology product development using examples from my own career, first as a postdoctoral fellow and research scientist on the LIGO project, and then developing products in the spectroscopy, telecommunications, and medical device industries. Approaches to identifying and pursuing opportunities in industry will be discussed.

  1. Ethanol production in China: Potential and technologies

    International Nuclear Information System (INIS)

    Li, Shi-Zhong; Chan-Halbrendt, Catherine

    2009-01-01

    Rising oil demand in China has resulted in surging oil imports and mounting environmental pollution. It is projected that by 2030 the demand for fossil fuel oil will be 250 million tons. Ethanol seems to be an attractive renewable alternative to fossil fuel. This study assesses China's ethanol supply potential by examining potential non-food crops as feedstock; emerging conversion technologies; and cost competitiveness. Results of this study show that sweet sorghum among all the non-food feedstocks has the greatest potential. It grows well on the available marginal lands and the ASSF technology when commercialized will shorten the fermentation time which will lower the costs. Other emerging technologies such as improved saccharification and fermentation; and cellulosic technologies will make China more competitive in ethanol production in the future. Based on the estimated available marginal lands for energy crop production and conversion yields of the potential feedstocks, the most likely and optimistic production levels are 19 and 50 million tons of ethanol by 2020. In order to achieve those levels, the roadmap for China is to: select the non-food feedstock most suitable to grow on the available marginal land; provide funding to support the high priority conversion technologies identified by the scientists; provide monetary incentives to new and poor farmers to grow the feedstocks to revitalize rural economy; less market regulation and gradual reduction of subsidies to producers for industry efficiency; and educate consumers on the impact of fossil fuel on the environment to reduce consumption. Since the share of ethanol in the overall fuel demand is small, the impact of ethanol on lowering pollution and enhancing fuel security will be minimal. (author)

  2. Environmental technologies of woody crop production systems

    Science.gov (United States)

    Ronald S. Zalesny Jr.; John A. Stanturf; Emile S. Gardiner; Gary S. Ba??uelos; Richard A. Hallett; Amir Hass; Craig M. Stange; James H. Perdue; Timothy M. Young; David R. Coyle; William L. Headlee

    2016-01-01

    Soil erosion, loss of productivity potential, biodiversity loss, water shortage, and soil and water pollution are ongoing processes that decrease or degrade provisioning (e.g., biomass, freshwater) and regulating (e.g., carbon sequestration, soil quality) ecosystem services. Therefore, developing environmental technologies that maximize these services is essential for...

  3. Isotope production technologies from a regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murthy, K. [Canadian Nuclear Safety Committee, Ottawa, Ontario (Canada)

    2012-07-01

    This paper discusses isotope production technologies from a regulatory perspective. The regulator is the CNSC which has the mandate to protect the health, safety and security of persons and the environment and to implement Canada's international commitments on the peaceful use of nuclear energy. Nuclear facilities regulated by CNSC include linear accelerator (medical), pool irradiator (industrial) and Pelletron (research) as well as cyclotrons.

  4. MODERN TECHNOLOGY OF FERMENTED MEAT PRODUCTS

    Directory of Open Access Journals (Sweden)

    L. V. Antipova

    2015-01-01

    Full Text Available Summary. New trends of meat industry development, on the example of sausages are shown. The detailed description of indicators of quality of meat raw materials, auxiliary materials and their influence on the processes of tissue and microbial fermentation in the process of ripening raw sausages. Measures for improving the quality control of meat raw materials, auxiliary materials, as well as the processing conditions in all stages of production of smoked products are suggested. The modern technology of production of raw sausages with starter cultures and complex products, allowing better standardization process is considered. Questions of chemistry of color formation, the formation of taste and flavor, textures and the suppression of undesired microflora in foods in general, and in particular the raw sausage are thoroughly covered. Ideas about factors affecting the formation of color in sausages are given. It is pointed out that the susceptibility to oxidation of nitrosilmioglobin is directly related to the fat oxidation in the whole redox potential. Trends in the market of raw sausages are shown. Requirements used in the meat industry to starting cultures are shown. Recommendations on the rational use of starter cultures, and other functional additives in technology of uncooked fermented products, which are used to improve the quality and ensure a high level of product safety are given. The characteristic of the innovative series of starter cultures Protect, its species belonging and qualitative composition, providing a unique protection system in the process of ripening and storage of smoked products is given. The properties are proved on the example of smoked poultry sausage.

  5. Food product tracing technology capabilities and interoperability.

    Science.gov (United States)

    Bhatt, Tejas; Zhang, Jianrong Janet

    2013-12-01

    Despite the best efforts of food safety and food defense professionals, contaminated food continues to enter the food supply. It is imperative that contaminated food be removed from the supply chain as quickly as possible to protect public health and stabilize markets. To solve this problem, scores of technology companies purport to have the most effective, economical product tracing system. This study sought to compare and contrast the effectiveness of these systems at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. It also determined if these systems can work together to better secure the food supply (their interoperability). Institute of Food Technologists (IFT) hypothesized that when technology providers are given a full set of supply-chain data, even for a multi-ingredient product, their systems will generally be able to trace a contaminated product forward and backward through the supply chain. However, when provided with only a portion of supply-chain data, even for a product with a straightforward supply chain, it was expected that interoperability of the systems will be lacking and that there will be difficulty collaborating to identify sources and/or recipients of potentially contaminated product. IFT provided supply-chain data for one complex product to 9 product tracing technology providers, and then compared and contrasted their effectiveness at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. A vertically integrated foodservice restaurant agreed to work with IFT to secure data from its supply chain for both a multi-ingredient and a simpler product. Potential multi-ingredient products considered included canned tuna, supreme pizza, and beef tacos. IFT ensured that all supply-chain data collected did not include any proprietary information or information that would otherwise

  6. Straw for energy production. Technology - Environment - Economy

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaisen, L.; Nielsen, C.; Larsen, M.G.; Nielsen, V.; Zielke, U.; Kristensen, J.K.; Holm-Christensen, B.

    1998-12-31

    `Straw for Energy Production`, second edition, provides a readily accessible background information of special relevance to the use of straw in the Danish energy supply. Technical, environmental, and economic aspects are described in respect of boiler plants for farms, district heating plants, and combined heat and power plants (CHP). The individual sections deal with both well-known, tested technology and the most recent advances in the field of CHP production. This publication is designed with the purpose of reaching the largest possible numbers of people and so adapted that it provides a valuable aid and gives the non-professional, general reader a thorough knowledge of the subject. `Straw for Energy Production` is also available in German and Danish. (au)

  7. Technology for recovery of by-products

    International Nuclear Information System (INIS)

    Van Tuy, H.H.

    1983-01-01

    Products of conventional nuclear fuel processing plants are uranium and plutonium, and any other recovered material is considered to be a by-product. Some by-products have been recovered from past nuclear fuel processing operations, either as a normal mode of operation or by special campaigns. Routing recovery over an extended period has been limited to neptunium, but extended campaigns were used at Hanford to recover strontium for radioisotope thermoelectric generators. Krypton is recovered at Idaho Chemical Processing Plant on a campaign basis, and isotope separation of krypton is done at Oak Ridge National Laboratory. Past campaigns at Hanford PUREX have recovered cesium, promethium, amercium, cerium, and technetium. Past by-product recovery efforts were usually severely constrained by the status of flowsheet development and availability of existing facilities at the time decisions wee made to recover the by-products. Additional processes were developed to accommodate other unit operations and in response to changes in waste management objectives or user requirements. Now an impressive variety of recovery technology is available for most potential by-products, with varying degrees of demonstration under conditions which satisfy today's environmental protection and waste management constraints

  8. Technical Integration of Nuclear Hydrogen Production Technology

    International Nuclear Information System (INIS)

    Lee, Ki Young; Park, J. K.; Chang, J. H.

    2009-04-01

    These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production cost. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items confirmed to the NHDD concepts. We developed and applied R and D quality management methodology to meet 'Development of Key Technologies for Nuclear Hydrogen' project. And we also distributed R and D QAM and R and D QAP to each teams and are in operation. The preconceptual flow diagrams of SI, HTSE, and HyS processes are introduced and their material and energy balances have been proposed. The hydrogen production thermal efficiencies of not only the SI process as a reference process but also the HTSE and HyS processes were also estimated. Technical feasibility assessments of SI, HTSE, and HyS processes have been carried out by using the pair-wise comparison and analytic hierarchy process, and it is revealed that the experts are considering the SI process as the most feasible process. The secondary helium pathway across the SI process is introduced. Dynamic simulation codes for the H2S04vaporizer, sulfuric acid and sulfur trioxide decomposers, and HI decomposer on the secondary helium pathway and for the primary and secondary sulfuric acid distillation columns, HIx solution distillation column, and preheater for HI vapor have been developed and integrated

  9. Characteristic of nitrous oxide production in partial denitrification process with high nitrite accumulation.

    Science.gov (United States)

    Du, Rui; Peng, Yongzhen; Cao, Shenbin; Wang, Shuying; Niu, Meng

    2016-03-01

    Nitrous oxide (N2O) production during the partial denitrification process with nitrate (NO3(-)-N) to nitrite (NO2(-)-N) transformation ratio of 80% was investigated in this study. Results showed that N2O was seldom observed before complete depletion of NO3(-)-N, but it was closely related to the reduction of NO2(-)-N rather than NO3(-)-N. High COD/NO3(-)-N was in favor of N2O production in partial denitrification with high NO2(-)-N accumulation. It was seriously enhanced at constant acidic pH due to the free nitrous acid (FNA) inhibition. However, the N2O production was much lower at initial pH of 5.5 and 6.5 due to the pH increase during denitrification process. Significantly, the pH turning point could be chosen as a controlled parameter to denote the end of NO3(-)-N reduction, which could not only achieve high NO2(-)-N accumulation but also decrease the N2O production significantly for practical application. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Agricultural R&D, technology and productivity.

    Science.gov (United States)

    Piesse, J; Thirtle, C

    2010-09-27

    The relationships between basic and applied agricultural R&D, developed and developing country R&D and between R&D, extension, technology and productivity growth are outlined. The declining growth rates of public R&D expenditures are related to output growth and crop yields, where growth rates have also fallen, especially in the developed countries. However, growth in output value per hectare has not declined in the developing countries and labour productivity growth has increased except in the EU. Total factor productivity has generally increased, however it is measured. The public sector share of R&D expenditures has fallen and there has been rapid concentration in the private sector, where six multinationals now dominate. These companies are accumulating intellectual property to an extent that the public and international institutions are disadvantaged. This represents a threat to the global commons in agricultural technology on which the green revolution has depended. Estimates of the increased R&D expenditures needed to feed 9 billion people by 2050 and how these should be targeted, especially by the Consultative Group on International Agricultural Research (CGIAR), show that the amounts are feasible and that targeting sub-Saharan Africa (SSA) and South Asia can best increase output growth and reduce poverty. Lack of income growth in SSA is seen as the most insoluble problem.

  11. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

  12. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility

  13. (Fuel, fission product, and graphite technology)

    Energy Technology Data Exchange (ETDEWEB)

    Stansfield, O.M.

    1990-07-25

    Travel to the Forschungszentrum (KFA) -- Juelich described in this report was for the purpose of participating in the annual meeting of subprogram managers for the US/DOE Umbrella Agreement for Fuel, Fission Product, and Graphite Technology. At this meeting the highlights of the cooperative exchange were reviewed for the time period June 1989 through June 1990. The program continues to contribute technology in an effective way for both countries. Revision 15 of the Subprogram Plan will be issued as a result of the meeting. There was interest expressed by KFA management in the level of support received from the NPR program and in potential participation in the COMEDIE loop experiment being conducted at the CEA.

  14. PRODUCTION WELL PERFORMANCE ENHANCEMENT USING SONICATION TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Adewumi; M. Thaddeus Ityokumbul; Robert W. Watson; Mario Farias; Glenn Heckman; Johnson Olanrewaju; Eltohami Eltohami; Bruce G. Miller; W. Jack Hughes; Thomas C. Montgomery

    2003-12-17

    The objective of this project is to develop a sonic well performance enhancement technology that focuses on near wellbore formations. In order to successfully achieve this objective, a three-year project has been defined with each year consisting of four tasks. The first task is the laboratory-scale study whose goal is to determine the underlying principles of the technology. The second task will develop a scale-up mathematical model to serve as the design guide for tool development. The third task is to develop effective transducers that can operate with variable frequency so that the most effective frequencies can be applied in any given situation. The system, assembled as part of the production string, ensures delivery of sufficient sonic energy to penetrate the near-wellbore formation. The last task is the actual field testing of the tool. The first year of the project has been completed.

  15. NEW GREENHOUSE TECHNOLOGIES FOR VEGETABLE PRODUCTION

    Directory of Open Access Journals (Sweden)

    S. M. Sirota

    2016-01-01

    Full Text Available First decade of XXI century is characterized by significant augmentation in vegetable world’s production. Average annual vegetable production has been 346 million tons, and it has exceeded the average annual potato production (318 million tons. It has occurred due to the use of up-to-date technologies for vegetable production and, particularly, in greenhouses. In Russian Federation, the total production of vegetables was 5 275.6 thousand tons in 2015 that was 13.3% more than in 2014. But the total vegetable production in greenhouses was only 722.8 thousand tons, that was 0.7% less than in 2014 (728.1 thousand tons. It can be explained that the old technologies have been used for many greenhouses around Russia. Up-to-date technologies for greenhouses are described in the article. Small-volume hydroponics. Plants are grown in mineral wadding, packed up in the special chutes. Mineral nutrition and water are supplied through special pipe with many branch pipes toward each plant. Advantage: pH and nutrition are maintained, consumption of water and mineral nutrition are optimized, and that improves plants grow control. Expenditures of labor decreased, quality of fruit became better and the yield increased significantly by 45-50 kg/m2 comparing with growing on the soil (25-30 kg/m2. Hydroponics with flowing water (salad production lines. Conveyor for salad and vegetable growing on horizontal moving chutes with flowing water and nutrition was developed. Advantage: high level of automation and mechanization of all processes of growing increased the effectiveness of the use of greenhouse areas (we can place 30% plants more at the same area. Seedling production lines. Production lines for seedlings enable to grow vegetables and leafy vegetables on stationary benches, being furnished with periodical nutrition and water supply at times. Advantage: 700 seedlings additionally on each m2 a year. Future technologies are

  16. Production and Partial Purification of a Neutral Metalloprotease by Fungal Mixed Substrate Fermentation

    Directory of Open Access Journals (Sweden)

    Alagarsamy Sumantha

    2005-01-01

    Full Text Available Five strains of fungi belonging to Aspergillus sp. were evaluated by casein agar plate assay and a wheat bran-based solid-state fermentation for selecting a neutral protease-producing culture. Based on the results, A. oryzae NRRL 2217 was selected for further studies. Sixteen different agro-industrial residues were evaluated for their potential to serve as a substrate for neutral protease production by this fungal strain. Results showed that a combination of coconut oil cake and wheat bran in the mass ratio of 1:3 was the best substrate for enzyme production. Various process parameters influencing protease production including fermentation time, initial moisture content, and fermentation temperature were optimised. The medium was supplemented with different nutrients in the form of organic and inorganic nitrogen and carbon sources. Supplementation of chitin increased the enzyme production significantly. Ammonium nitrate as inorganic nitrogen supplement slightly enhanced enzyme production. No organic nitrogen supplement was effective enhancer of enzyme production. Fermentation was performed under optimised conditions (initial moisture content V/m = 50 %, temperature 30 °C, 48 h. Partial purification of the enzyme resulted in a 3-fold increase in the specific activity of the enzyme. The partially purified enzyme was characterised by various features that govern the enzyme activity such as assay temperature, assay pH and substrate concentration. The effect of various metal ions and known protease inhibitors on the enzyme activity was also studied. The enzyme was found to be stable in pH range 7.0–7.5, and at temperature of 50 °C for 35 min. By the activating effect of divalent cations (Mg2+, Ca2+, Fe2+ and inhibiting effect of certain chelating agents (EGTA, EDTA, the enzyme was found to be a metalloprotease.

  17. Nitrous Oxide Production in a Granule-based Partial Nitritation Reactor: A Model-based Evaluation.

    Science.gov (United States)

    Peng, Lai; Sun, Jing; Liu, Yiwen; Dai, Xiaohu; Ni, Bing-Jie

    2017-04-03

    Sustainable wastewater treatment has been attracting increasing attentions over the past decades. However, the production of nitrous oxide (N 2 O), a potent GHG, from the energy-efficient granule-based autotrophic nitrogen removal is largely unknown. This study applied a previously established N 2 O model, which incorporated two N 2 O production pathways by ammonia-oxidizing bacteria (AOB) (AOB denitrification and the hydroxylamine (NH 2 OH) oxidation). The two-pathway model was used to describe N 2 O production from a granule-based partial nitritation (PN) reactor and provide insights into the N 2 O distribution inside granules. The model was evaluated by comparing simulation results with N 2 O monitoring profiles as well as isotopic measurement data from the PN reactor. The model demonstrated its good predictive ability against N 2 O dynamics and provided useful information about the shift of N 2 O production pathways inside granules for the first time. The simulation results indicated that the increase of oxygen concentration and granule size would significantly enhance N 2 O production. The results further revealed a linear relationship between N 2 O production and ammonia oxidation rate (AOR) (R 2  = 0.99) under the conditions of varying oxygen levels and granule diameters, suggesting that bulk oxygen and granule size may exert an indirect effect on N 2 O production by causing a change in AOR.

  18. A Complete Set of Technologies for Green Food Pork Production

    Institute of Scientific and Technical Information of China (English)

    YANG Xing-wu; SHAN An-shan; JIANG Jiu-tian; ZHANG Tian-feng

    2003-01-01

    Key technologies for green food pork production were described in this article,as aspects of business standardization;production equipments and facilities,product quality control;and pork production site establishment.

  19. Partial strands synthesizing leads to inevitable aborting and complicated products in consecutive polymerase chain reactions (PCRs)

    Institute of Scientific and Technical Information of China (English)

    LUO Rui; ZHANG DaMing

    2007-01-01

    Various abnormal phenomena have been observed during PCR so far. The present study performed a series of consecutive PCRs (including many rounds of re-amplification continuously) and found that the abortion of re-amplification was inevitable as long as a variety of complicated product appeared.The aborting stages varied, according to the lengths of targets. Longer targets reached the abortion earlier than the shorter ones, marked by appearance of the complex that was immobile in electrophoresis. Denatured gel-electrophoresis revealed that the complex was mainly made up of shorter or partially synthesized strands, together with small amounts of full-length ones. Able to be digested by S1 nuclease but unable by restriction endonucleases (REs), the complex was proved to consist of both single regions and double-helix regions that kept the complex stable thermodynamically. Simulations gave evidence that partial strands, even at lower concentration, could disturb re-amplification effectively and lead to the abortion of re-amplifications finally. It was pointed out that the partial strands formed chiefly via polymerase's infidelity, and hence the solution to lighten the abnormality was also proposed.

  20. Partial strands synthesizing leads to inevitable aborting and complicated products in consecutive polymerase chain reactions (PCRs)

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Various abnormal phenomena have been observed during PCR so far. The present study performed a series of consecutive PCRs (including many rounds of re-amplification continuously) and found that the abortion of re-amplification was inevitable as long as a variety of complicated product appeared. The aborting stages varied, according to the lengths of targets. Longer targets reached the abortion earlier than the shorter ones, marked by appearance of the complex that was immobile in electropho-resis. Denatured gel-electrophoresis revealed that the complex was mainly made up of shorter or partially synthesized strands, together with small amounts of full-length ones. Able to be digested by S1 nuclease but unable by restriction endonucleases (REs), the complex was proved to consist of both single regions and double-helix regions that kept the complex stable thermodynamically. Simulations gave evidence that partial strands, even at lower concentration, could disturb re-amplification effec- tively and lead to the abortion of re-amplifications finally. It was pointed out that the partial strands formed chiefly via polymerase’s infidelity, and hence the solution to lighten the abnormality was also proposed.

  1. Low-rank extremal positive-partial-transpose states and unextendible product bases

    International Nuclear Information System (INIS)

    Leinaas, Jon Magne; Sollid, Per Oyvind; Myrheim, Jan

    2010-01-01

    It is known how to construct, in a bipartite quantum system, a unique low-rank entangled mixed state with positive partial transpose (a PPT state) from an unextendible product basis (UPB), defined as an unextendible set of orthogonal product vectors. We point out that a state constructed in this way belongs to a continuous family of entangled PPT states of the same rank, all related by nonsingular unitary or nonunitary product transformations. The characteristic property of a state ρ in such a family is that its kernel Ker ρ has a generalized UPB, a basis of product vectors, not necessarily orthogonal, with no product vector in Im ρ, the orthogonal complement of Ker ρ. The generalized UPB in Ker ρ has the special property that it can be transformed to orthogonal form by a product transformation. In the case of a system of dimension 3x3, we give a complete parametrization of orthogonal UPBs. This is then a parametrization of families of rank 4 entangled (and extremal) PPT states, and we present strong numerical evidence that it is a complete classification of such states. We speculate that the lowest rank entangled and extremal PPT states also in higher dimensions are related to generalized, nonorthogonal UPBs in similar ways.

  2. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    Energy Technology Data Exchange (ETDEWEB)

    Borba, Marcia; Bona, Alvaro Della, E-mail: marcia_borb@hotmail.com [Universidade de Passo Fundo (UPF), RS (Brazil). Fac. de Odontologia; Miranda Junior, Walter Gomes; Cesar, Paulo Francisco [Universidade de Sao Paulo (USP), SP (Brazil). Fac. de Odontologia. Dept. de Biomateriais e Bioquimica Oral; Griggs, Jason Allan [Department of Biomedical Materials Science, Dental School, University of Mississippi Medical Center - UMMC, Jackson, MS (United States)

    2013-09-15

    The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm² connector cross-sections using a LAVA® CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross sectional images. Five measuring points were selected, as follows: MG- marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α = 0.05). There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 μm). OA had the highest median gap dimension (125 μm), followed by the AOT point (105 μm). CA and AW gap width values were statistically similar, 66 and 65 μm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations. (author)

  3. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    International Nuclear Information System (INIS)

    Borba, Marcia; Bona, Alvaro Della

    2013-01-01

    The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm² connector cross-sections using a LAVA® CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross sectional images. Five measuring points were selected, as follows: MG- marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α = 0.05). There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 μm). OA had the highest median gap dimension (125 μm), followed by the AOT point (105 μm). CA and AW gap width values were statistically similar, 66 and 65 μm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations. (author)

  4. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

    Directory of Open Access Journals (Sweden)

    Marcia Borba

    2013-09-01

    Full Text Available The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs (Y-TZP - LAVA, 3M-ESPE, using a novel methodology based on micro-computed tomography (micro-CT technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced with 9 mm2 connector cross-sections using a LAVATM CAD-CAM system. All FPDs were veneered with a compatible porcelain. Each FPD was seated on the original model and scanned using micro-CT. Files were processed using NRecon and CTAn software. Adobe Photoshop and Image J software were used to analyze the cross-sectional images. Five measuring points were selected, as follows: MG - marginal gap; CA - chamfer area; AW - axial wall; AOT - axio-occlusal transition area; OA - occlusal area. Results were statistically analyzed by Kruskall-Wallis and Tukey's post hoc test (α= 0.05. There were significant differences for the gap width between the measurement points evaluated. MG showed the smallest median gap width (42 µm. OA had the highest median gap dimension (125 µm, followed by the AOT point (105 µm. CA and AW gap width values were statistically similar, 66 and 65 µm respectively. Thus, it was possible to conclude that different levels of adaptation were observed within the FPD, at the different measuring points. In addition, the micro-CT technology seems to be a reliable tool to evaluate the fit of dental restorations.

  5. Projection display technology and product trends

    Science.gov (United States)

    Kahn, Frederic J.

    1999-05-01

    Major technology and market trends that could generate a 20 billion dollar electronic projector market by 2010 are reviewed in the perspective of recent product introductions. A log linear analysis shows that the light outputs of benchmark transportable data video projectors have increased at a rate of almost 90 percent per year since 1993. The list prices of these same projectors have decreased at a rate of over 40 percent per year. The tradeoffs of light output vs. resolution and weight are illustrated. Recent trends in projector efficacy vs. year are discussed. Lumen output per dollar of list price is shown to be a useful market metric. Continued technical advances and innovations including higher throughput light valve technologies with integrated drivers, brighter light source, field sequential color, integrated- and micro-optical components, and aerospace materials are likely to sustain these trends. The new technologies will enable projection displays for entertainment and computer applications with unprecedented levels of performance, compactness, and cost-effectiveness.

  6. Properties and possibilities to use by-product from e-beam installations for partial recycling of ammonia

    International Nuclear Information System (INIS)

    Pelovski, Y.

    2011-01-01

    Generated by-products from E-beam cleaning systems of industrial waste gases have been studied using different techniques like TG-DTA systems, Electron Microscopy, X-Ray diffraction and IR spectroscopy methods. On the base of the investigations it was found that the composition of the by-product varies depending on the content of pollutants in the waste gases and technological parameters during cleaning process. Size of particles and thermal stability of the by product were determined. Content of ammonium sulphate as a main component, ammonium nitrate and heavy metals content is also determined and discussed. During thermal treatment of the by-product at temperature range 543-663K half of the ammonia is released in the gas phase. Kinetic parameters of the thermal decomposition are determined and it is confirmed that for waste gases containing mainly SO x as a pollutants they are very close to the pure ammonium sulphate. By-product from demonstration E-beam installation at Maritsa-East -2 TPP is used to produce mixed fertilisers using milled Tunisia phosphorites or tribo-activated mixtures of the by-product, Tunisia phosphorite, potassium sulphate and aches from electrostatic precipitators of TPP. It was found that during thermo-tribochemical treatment of selected mixtures different type of fertilisers could be produced, where the soluble forms of Phosphorous may vary, depending on the conditions. During thermal treatment about half of ammonia is released in the gas phase opening a way for partial recycling of ammonia to the cleaning process. Agrochemical tests of the fertilisers on the base of by-product confirm their efficiency. (author)

  7. Properties and possibilities to use by-product from e-beam installations for partial recycling of ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Pelovski, Y. [University of Chemical Technology and Metallurgy, Sofia (Bulgaria)

    2011-07-01

    Generated by-products from E-beam cleaning systems of industrial waste gases have been studied using different techniques like TG-DTA systems, Electron Microscopy, X-Ray diffraction and IR spectroscopy methods. On the base of the investigations it was found that the composition of the by-product varies depending on the content of pollutants in the waste gases and technological parameters during cleaning process. Size of particles and thermal stability of the by product were determined. Content of ammonium sulphate as a main component, ammonium nitrate and heavy metals content is also determined and discussed. During thermal treatment of the by-product at temperature range 543-663K half of the ammonia is released in the gas phase. Kinetic parameters of the thermal decomposition are determined and it is confirmed that for waste gases containing mainly SO{sub x} as a pollutants they are very close to the pure ammonium sulphate. By-product from demonstration E-beam installation at Maritsa-East -2 TPP is used to produce mixed fertilisers using milled Tunisia phosphorites or tribo-activated mixtures of the by-product, Tunisia phosphorite, potassium sulphate and aches from electrostatic precipitators of TPP. It was found that during thermo-tribochemical treatment of selected mixtures different type of fertilisers could be produced, where the soluble forms of Phosphorous may vary, depending on the conditions. During thermal treatment about half of ammonia is released in the gas phase opening a way for partial recycling of ammonia to the cleaning process. Agrochemical tests of the fertilisers on the base of by-product confirm their efficiency. (author)

  8. The financial impact of robotic technology for partial and radical nephrectomy.

    Science.gov (United States)

    Kates, Max; Ball, Mark W; Patel, Hiten D; Gorin, Michael A; Pierorazio, Phillip M; Allaf, Mohamad E

    2015-03-01

    We sought to evaluate the financial impact of robotic technology for partial nephrectomy (PN) and radical nephrectomy (RN) in the state of Maryland. The Maryland Health Services Cost Review Commission (HSCRC) documents all acute care hospital charges data. This database was queried for patients who underwent laparoscopic or robot-assisted RN and PN from 2008 to 2012. Total hospital charge, subcharge, and length of stay (LOS) were analyzed separately for RN and PN. Overall, 2834 patients were identified. Of those, 282 were laparoscopic PN (LPN), 1078 robot-assisted PN (RPN), 1098 laparoscopic RN (LRN), and 376 robot-assisted RN (RRN). For PN, the total hospital charge was $19,062 for LPN and $18,255 for RPN (P=0.138), with a charge savings of $807 per case in favor of robotics. For RN, the total hospital charge was $23,391 for RRN and $18,280 for LRN (P=0.004), with a charge premium of $5111 for robotic cases. LOS was shorter for RPN compared with LPN (2.51 vs 2.99 days, Pfinancial implications of RRN use for routine cases warrants further study.

  9. 2-Formyl-komarovicine promotes adiponectin production in human mesenchymal stem cells through PPARγ partial agonism.

    Science.gov (United States)

    Ahn, Sungjin; Lee, Moonyoung; An, Seungchan; Hyun, Sooyeol; Hwang, Jiho; Lee, Jongkook; Noh, Minsoo

    2018-03-01

    Adiponectin is a major adipocytokine secreted from mammalian adipocytes. Relatively low expression of adiponectin is associated with various human metabolic diseases and some cancers. Adiponectin-secreting compounds have therapeutic potential for these diseases. Adipogenesis of human bone marrow-mesenchymal stem cells (hBM-MSCs) has been used as a phenotypic assay to find adiponectin secreting compounds. In a phytochemical library screen, 2-formyl-komarovicine, 1-(quinolin-8-yl)-1,3,4,9-tetrahydro-2H-pyrido[3,4-b]indole-2-carbaldehyde, isolated from Nitraria komarovii was identified as a potential adiponectin-secreting compound. To validate the results of the impure phytochemical, we synthesized 2-formyl-komarovicine. The synthetic 2-formyl-komarovicine significantly promoted adiponectin production during adipogenesis in hBM-MSCs. In a target identification experiment, 2-formyl-komarovicine bound to peroxisome proliferator-activated receptor γ (PPARγ) in a concentration-dependent manner. Notably, 2-formyl-komarovicine competitively inhibited the adiponectin-promoting activity of a full PPARγ agonist, troglitazone, in hBM-MSCs, which is a pharmacological feature of a partial agonist. The ligand-docking model showed that 2-formyl-komarovicine interacted with the hydrophobic pocket of the PPARγ ligand-binding domain, but lacked an interaction to stabilize helix H12, which is one of the major binding themes of PPARγ partial agonists. We concluded that 2-formyl-komarovicine provides a novel pharmacophore for PPARγ partial agonists to increase adiponectin production. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. A novel technique for hydrogen production from hog-manure in supercritical partial oxidation (SCWPO)

    Energy Technology Data Exchange (ETDEWEB)

    Youssef, Emhemmed A.; Charpentier, Paul [Western Ontario Univ., London, ON (Canada). Dept. of Chemical and Biochemical Engineering; Nakhla, George [Western Ontario Univ., London, ON (Canada). Dept. of Chemical and Biochemical Engineering; Western Ontario Univ., London, ON (Canada). Dept. of Civil and Environmental Engineering; Elbeshbishy, Elsayed; Hafez, Hisham [Western Ontario Univ., London, ON (Canada). Dept. of Civil and Environmental Engineering

    2010-07-01

    In this study, the catalytic hydrogen production from hog manure using supercritical water partial oxidation was investigated in a batch reactor at a temperature of 500 C, and pressure of 28 MPa using several metallic catalysts. Hog manure was characterized by a total and soluble chemical oxygen demand (TCOD, SCOD) of 57000 and 28000 mg/L, total and volatile suspended solids (TSS, VSS) of 25000, 19000, and ammonia of 2400 mg/L, respectively. The order of H{sub 2} production was the following: Pd/AC > Ru/Al{sub 2}O{sub 3} > Ru/AC > AC > NaOH. The order of COD reduction efficiency was as follows: NaOH > Ru/AC > AC > Ru/Al{sub 2}O{sub 3} > Pd/AC. The behaviour of the volatile fatty acids (VFA's), ethanol, methanol, ammonia, H{sub 2}S, and Sulfate was investigated experimentally and discussed. A 35 % reduction in the H{sub 2} and CH{sub 4} yields was observed in the sequential gasification partial oxidation (oxidant at an 80 % of theoretical requirement) experiments compared to the gasification experiments (catalyst only). Moreover, this reduction in gas yields was coincided with a 45 % reduction in the liquid effluent chemical oxygen demand (COD), 60 % reduction of the ammonia concentration in the liquid effluent, and 20 % reduction in the H{sub 2}S concentration in the effluent gas. (orig.)

  11. Development of fission Mo production technology

    International Nuclear Information System (INIS)

    Kim, B. K.; Park, K. B.; Jun, B. J.; Park, J. H.; Choung, W. M.; Lee, K. I.; Woo, M. S.; Whang, D. S.; Kim, Y. K.; Yoo, J. H.; Sohn, D. S.; Lee, Y. W.; Na, S. H.; Koo, Y. H.; Hwang, D. H.; Joo, P. K.

    1997-08-01

    The feasibility study is accomplished in this project for the development of fission moly production. The KAERI process proposed for development in KAERI is discussed together with those of the American Cintichem and Russian IPPE, each of which would be plausible for introduction whenever the indigenous development is not much feasible. For the conceptual design of the KAERI irradiation target, analysis method is set up and some preliminary analysis is performed accordingly for the candidate design. To establish chemical process concepts for the afore-mentioned three processes, characteristics, operation conditions, and the management of the generated wastes are investigated. Basic requirements of hotcell facilities for chemical processing and a possible way of utilizing the existing hotcells are discussed in parallel with the counter-measures for the construction of new hotcell facilities. Various conditions of target irradiation for fission moly production in Hanaro are analyzed. Plan for introduction of the relevant technology introduction and for procurement of highly enriched uranium are considered. On the basis of assuming some conditions, the economic feasibility study for fission moly production is also overviewed. (author). 22 refs., 28 tabs., 24 figs

  12. New elements in production technology and operations

    International Nuclear Information System (INIS)

    Melberg, O.

    1995-01-01

    The title of this presentation embraces quite a wide scope, however, focus will be on Mobile Production Systems (MPSs) and in particular on Floating Production, Storage and Offloading Units (FPSOs), for which there is presently a remarkable boost in interest particularly in the North Sea area. Over the last 20 years, pioneered by the Argyll TW 58 in 1975, 11 mobile systems have been/are active in the North Sea, i.e. a growth of one for each second year. In 1994 alone a number of eight mobile production systems were contracted of which seven were FPSOs. This boost is following nine years of successful operation of the Petrojarl 1 and is also clearly linked to the success of the Kerr-McGee's Gryphon A project. The title of this presentation reflects new elements in this business; the upturn in interest for FPSOs introduces new ways of thinking and acting. In this paper, the new elements are divided into the general trends; new commercial elements and new technological elements

  13. Hybrid Nitrous Oxide Production from a Partial Nitrifying Bioreactor: Hydroxylamine Interactions with Nitrite.

    Science.gov (United States)

    Terada, Akihiko; Sugawara, Sho; Hojo, Keisuke; Takeuchi, Yuki; Riya, Shohei; Harper, Willie F; Yamamoto, Tomoko; Kuroiwa, Megumi; Isobe, Kazuo; Katsuyama, Chie; Suwa, Yuichi; Koba, Keisuke; Hosomi, Masaaki

    2017-03-07

    The goal of this study was to elucidate the mechanisms of nitrous oxide (N 2 O) production from a bioreactor for partial nitrification (PN). Ammonia-oxidizing bacteria (AOB) enriched from a sequencing batch reactor (SBR) were subjected to N 2 O production pathway tests. The N 2 O pathway test was initiated by supplying an inorganic medium to ensure an initial NH 4 + -N concentration of 160 mg-N/L, followed by 15 NO 2 - (20 mg-N/L) and dual 15 NH 2 OH (each 17 mg-N/L) spikings to quantify isotopologs of gaseous N 2 O ( 44 N 2 O, 45 N 2 O, and 46 N 2 O). N 2 O production was boosted by 15 NH 2 OH spiking, causing exponential increases in mRNA transcription levels of AOB functional genes encoding hydroxylamine oxidoreductase (haoA), nitrite reductase (nirK), and nitric oxide reductase (norB) genes. Predominant production of 45 N 2 O among N 2 O isotopologs (46% of total produced N 2 O) indicated that coupling of 15 NH 2 OH with 14 NO 2 - produced N 2 O via N-nitrosation hybrid reaction as a predominant pathway. Abiotic hybrid N 2 O production was also observed in the absence of the AOB-enriched biomass, indicating multiple pathways for N 2 O production in a PN bioreactor. The additional N 2 O pathway test, where 15 NH 4 + was spiked into 400 mg-N/L of NO 2 - concentration, confirmed that the hybrid N 2 O production was a dominant pathway, accounting for approximately 51% of the total N 2 O production.

  14. Technology Model of Aquaculture Production System

    Science.gov (United States)

    Hor, K. W.; Salleh, S. M.; Abdullah; Ezree, Mohd; Zaman, I.; Hatta, M. H.; Ahmad, S.; Ismail, A. E.; Mahmud, W. A. W.

    2017-10-01

    The high market demand has led to the rapid growth in fish farming. The young generation are inexperienced in determining the estimated results of fish farming and the preparation of fish pond during the period of fish farming. These need a complete guide as their reference which includes the knowledge of fish farming. The main objective of this project is to develop a practical design of real pond appropriate with aquaculture technology and fish farming production. There are three parts of study in this project which include fish farming cage, growth of fish and water quality of fish farming pond. Few of experiments were carried out involved the collection data in terms of growth of fish and parameters of water quality.

  15. Technology for treatment of decontamination products

    International Nuclear Information System (INIS)

    Kavkhuta, G.A.; Rozdzyalovskaya, L.F.

    1994-01-01

    The research concerning the methods of management and processing of products generated as the result of post Chernobyl decontamination activities is being carried out by the Institute of Radioecological Problems of Belarus Academy of Science (IRP) in the framework of the Belarus National Programme. The main goal of this work is choice and development of an appropriate system for treatment of the decontamination radwastes, based on currently available information and experimental studies. This paper presents the technological schemes being studied for treating the post-Chernobyl liquid and solid wastes and will also briefly discuss the approach being used to settle a problem on collecting/management of low-level radioactive ash wastes, generated from the use of contaminated fuel

  16. Continuous Partial Attention as a Problematic Technology Use: A Case of Educators

    Science.gov (United States)

    Firat, Mehmet

    2013-01-01

    Continuous Partial Attention is a current concept open to research which, besides multitasking, intensely occupies the agenda of education, communication and cognitive psychology. The purpose of the present study was to determine educators' continuous partial attention. In line with this purpose, the research data were collected from 109 educators…

  17. Organisational change and the productivity effects of green technology adoption

    OpenAIRE

    Hottenrott, Hanna; Rexhäuser, Sascha; Veugelers, Reinhilde

    2016-01-01

    This study investigates induced productivity effects of firms introducing new environmental technologies. The literature on within-firm organisational change and productivity suggests that firms can achieve higher productivity gains from adopting new technologies if they adapt their organisational structures. Such complementarity effects may be of particular importance for the adoption of greenhouse gas (GHG) abatement technologies. The adoption of these technologies is often induced by publi...

  18. Technologies for direct production of flexible H2/CO synthesis gas

    International Nuclear Information System (INIS)

    Song Xueping; Guo Zhancheng

    2006-01-01

    The use of synthesis gas offers the opportunity to furnish a broad range of environmentally clean fuels and high value chemicals. However, synthesis gas manufacturing systems based on natural gas are capital intensive, and hence, there is great interest in technologies for cost effective synthesis gas production. Direct production of synthesis gas with flexible H 2 /CO ratio, which is in agreement with the stoichiometric ratios required by major synthesis gas based petrochemicals, can decrease the capital investment as well as the operating cost. Although CO 2 reforming and catalytic partial oxidation can directly produce desirable H 2 /CO synthesis gas, they are complicated and continued studies are necessary. In fact, direct production of flexible H 2 /CO synthesis gas can be obtained by optimizing the process schemes based on steam reforming and autothermal reforming as well as partial oxidation. This paper reviews the state of the art of the technologies

  19. Aerial photography in peat production technology

    International Nuclear Information System (INIS)

    Tervo, M.

    1998-01-01

    In this project, possibilities of using aerial photography in peat technology were studied experimentally, the frequency of self-heating in peat stockpiles was surveyed and the effect of compacting on the inner temperature in a self-heated milled peat stockpile was studied. Air photographs can be used in several sub-fields of the peat production. On the basis of these photos it is possible to draw conclusions from the environmental impacts of peat production, from conditions in the peat field, and from qualitative and moisture differences of surface peat. In addition, aerial photography can be utilised in updating bog maps. On the basis of aerial thermal photography in autumns 1987 - 1993, 29 % of milled peat stockpiles, and 4 % of sod peat stockpiles were found to be self-heated. The susceptibility to self-heating varied at different peatlands. The effect of compacting with a bulldozer was studied at three self-heated test stock-piles, two of which were compacted. The inner temperatures in the test stockpiles decreased significantly over the three-month monitoring period. The falls in the inner temperature of all three stockpiles were identical. Compacting did not have any significant effect on the temperature fall or on the rate of fall. The number of test stockpiles (3) is insufficient to give any statistical reliability. (orig.)

  20. Lipolytic Potential of Aspergillus japonicus LAB01: Production, Partial Purification, and Characterisation of an Extracellular Lipase

    Science.gov (United States)

    Souza, Lívia Tereza Andrade; Oliveira, Jamil S.; dos Santos, Vera L.; Regis, Wiliam C. B.; Santoro, Marcelo M.; Resende, Rodrigo R.

    2014-01-01

    Lipolytic potential of Aspergillus japonicus LAB01 was investigated by describing the catalytic properties and stability of a secreted extracellular lipase. Enzyme production was considered high under room temperature after 4 days using sunflower oil and a combination of casein with sodium nitrate. Lipase was partially purified by 3.9-fold, resulting in a 44.2% yield using ammonium sulphate precipitation (60%) quantified with Superose 12 HR gel filtration chromatography. The activity of the enzyme was maximised at pH 8.5, and the enzyme demonstrated stability under alkaline conditions. The optimum temperature was found to be 45°C, and the enzyme was stable for up to 100 minutes, with more than 80% of initial activity remaining after incubation at this temperature. Partially purified enzyme showed reasonable stability with triton X-100 and was activated in the presence of organic solvents (toluene, hexane, and methanol). Among the tested ions, only Cu2+, Ni2+, and Al3+ showed inhibitory effects. Substrate specificity of the lipase was higher for C14 among various p-nitrophenyl esters assayed. The KM and V max values of the purified enzyme for p-nitrophenyl palmitate were 0.13 mM and 12.58 umol/(L·min), respectively. These features render a novel biocatalyst for industrial applications. PMID:25530954

  1. Steam and partial oxidation reforming options for hydrogen production from fossil fuels for PEM fuel cells

    Directory of Open Access Journals (Sweden)

    Yousri M.A. Welaya

    2012-06-01

    Full Text Available Proton exchange membrane fuel cell (PEM generates electrical power from air and from hydrogen or hydrogen rich gas mixtures. Therefore, there is an increasing interest in converting current hydrocarbon based marine fuels such as natural gas, gasoline, and diesel into hydrogen rich gases acceptable to the PEM fuel cells on board ships. Using chemical flow sheeting software, the total system efficiency has been calculated. Natural gas appears to be the best fuel for hydrogen rich gas production due to its favorable composition of lower molecular weight compounds. This paper presents a study for a 250 kW net electrical power PEM fuel cell system utilizing a partial oxidation in one case study and steam reformers in the second. This study has shown that steam-reforming process is the most competitive fuel processing option in terms of fuel processing efficiency. Partial oxidation process has proved to posses the lowest fuel processing efficiency. Among the options studied, the highest fuel processing efficiency is achieved with natural gas steam reforming system.

  2. Hydrogen production by the iodine-sulphur thermochemical cycle. Total and partial pressure measurements

    International Nuclear Information System (INIS)

    D Doizi; V Dauvois; J L Roujou; V Delanne; P Fauvet; B Larousse; O Hercher; P Carles; C Moulin

    2006-01-01

    The iodine sulphur thermochemical cycle appears to be one of the most promising candidate for the massive production of hydrogen using nuclear energy. The key step in this cycle is the HI distillation section which must be optimized to get a good efficiency of the overall cycle. The concept of reactive versus extractive distillation of HI has been proposed because of its potentiality. The design and the optimization of the reactive distillation column requires the knowledge of the liquid vapour equilibrium over the ternary HI-I 2 -H 2 O mixtures up to 300 C and 100 bars. A general methodology based on three experimental devices imposed by the very corrosive and concentrated media will be described: 1) I1 for the total pressure measurement versus different ternary compositions. 2) I2 for the partial and total pressure measurements around 130 C and 2 bars to validate the choice of the analytical optical 'online' techniques we have proposed. 3) I3 for the partial and total pressures measurements in the process domain. The results obtained on pure samples, binary mixtures HI-H 2 O and ternary mixtures using an experimental design analysis in the experimental device I2 will be discussed. (authors)

  3. Isotopic evidence for nitrous oxide production pathways in a partial nitritation-anammox reactor.

    Science.gov (United States)

    Harris, Eliza; Joss, Adriano; Emmenegger, Lukas; Kipf, Marco; Wolf, Benjamin; Mohn, Joachim; Wunderlin, Pascal

    2015-10-15

    Nitrous oxide (N2O) production pathways in a single stage, continuously fed partial nitritation-anammox reactor were investigated using online isotopic analysis of offgas N2O with quantum cascade laser absorption spectroscopy (QCLAS). N2O emissions increased when reactor operating conditions were not optimal, for example, high dissolved oxygen concentration. SP measurements indicated that the increase in N2O was due to enhanced nitrifier denitrification, generally related to nitrite build-up in the reactor. The results of this study confirm that process control via online N2O monitoring is an ideal method to detect imbalances in reactor operation and regulate aeration, to ensure optimal reactor conditions and minimise N2O emissions. Under normal operating conditions, the N2O isotopic site preference (SP) was much higher than expected - up to 40‰ - which could not be explained within the current understanding of N2O production pathways. Various targeted experiments were conducted to investigate the characteristics of N2O formation in the reactor. The high SP measurements during both normal operating and experimental conditions could potentially be explained by a number of hypotheses: i) unexpectedly strong heterotrophic N2O reduction, ii) unknown inorganic or anammox-associated N2O production pathway, iii) previous underestimation of SP fractionation during N2O production from NH2OH, or strong variations in SP from this pathway depending on reactor conditions. The second hypothesis - an unknown or incompletely characterised production pathway - was most consistent with results, however the other possibilities cannot be discounted. Further experiments are needed to distinguish between these hypotheses and fully resolve N2O production pathways in PN-anammox systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Potential Fish Production Impacts from Partial Removal of Decommissioned Oil and Gas Platforms off the Coast of California

    Science.gov (United States)

    Claisse, J.; Pondella, D.; Love, M.; Zahn, L.; Williams, C.; Bull, A. S.

    2016-02-01

    When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

  5. Temperature oscillations in methanol partial oxidation reactor for the production of hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinsu; Byeon, Jeonguk; Seo, Il Gyu; Lee, Hyun Chan; Kim, Dong Hyun; Lee, Jietae [Kyungpook National University, Daegu (Korea, Republic of)

    2013-04-15

    Methanol partial oxidation (POX) is a well-known reforming reaction for the production of hydrogen from methanol. Since POX is relatively fast and highly exothermic, this reforming method will be efficient for the fast start-up and load-following operation. However, POX generates hot spots around catalyst and even oscillations in the reactor temperature. These should be relieved for longer operations of the reactor without catalyst degradations. For this, temperature oscillations in a POX reactor are investigated experimentally. Various patterns of temperature oscillations according to feed flow rates of reactants and reactor temperatures are obtained. The bifurcation phenomena from regular oscillations to chaotic oscillations are found as the methanol flow rate increases. These experimental results can be used for theoretical analyses of oscillations and for designing safe reforming reactors.

  6. Temperature oscillations in methanol partial oxidation reactor for the production of hydrogen

    International Nuclear Information System (INIS)

    Kim, Jinsu; Byeon, Jeonguk; Seo, Il Gyu; Lee, Hyun Chan; Kim, Dong Hyun; Lee, Jietae

    2013-01-01

    Methanol partial oxidation (POX) is a well-known reforming reaction for the production of hydrogen from methanol. Since POX is relatively fast and highly exothermic, this reforming method will be efficient for the fast start-up and load-following operation. However, POX generates hot spots around catalyst and even oscillations in the reactor temperature. These should be relieved for longer operations of the reactor without catalyst degradations. For this, temperature oscillations in a POX reactor are investigated experimentally. Various patterns of temperature oscillations according to feed flow rates of reactants and reactor temperatures are obtained. The bifurcation phenomena from regular oscillations to chaotic oscillations are found as the methanol flow rate increases. These experimental results can be used for theoretical analyses of oscillations and for designing safe reforming reactors

  7. Problems and Instruments of Product and Technological Diversification of Manufacturing

    Directory of Open Access Journals (Sweden)

    Kuzmin Oleg Ye.

    2015-03-01

    Full Text Available The purpose of the article involves identification of objectives and development of instruments for product and technological diversification aimed at updating the range of products and introducing innovative technologies, which will ensure a high level of competitiveness and create preconditions for steady development of the enterprise. As a result of studying the literary sources the objectives and instruments for development of enterprises by means of product and technological diversification have been defined. The article suggests effective instruments of product and technological diversification of manufacturing, namely: the model of expansion of the product range, multi-criteria model of optimization of the product range, a modified model of Kantorovich-Koopmans for implementing new production technologies with set limits on the product output. Further research relate to formation of instruments for manufacturing diversification by means of introducing new types of production.

  8. Nano-enabled environmental products and technologies - opportunities and drawbacks

    DEFF Research Database (Denmark)

    Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

    The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

  9. The production of hydrogen through the uncatalyzed partial oxidation of methane in an internal combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Karim, Ghazi A.; Wierzba, I. [Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary (Canada)

    2008-04-15

    The thermodynamic and kinetic limitations of the uncatalyzed partial oxidation of methane for the production of synthesis gas, which is made up of mostly hydrogen and carbon monoxide in a variety of proportions, are reviewed. It is suggested that such processes can be made to proceed successfully in a conventional internal combustion engine when operated on excessively rich mixtures of methane and oxygenated air. This is achieved while simultaneously producing power and regenerative exhaust gas heating. Experimental results are described that show a dual fuel engine of the compression ignition type with pilot liquid fuel injection can be operated on excessively rich mixtures of methane and air supplemented with oxygen gas to produce hydrogen rich gas with high methane conversion rates. Similarly, a spark ignition engine was reported to be equally capable of such production and performance. It is shown that there are viable prospects for the simultaneous production of synthesis gas in engines with efficient useful mechanical power and exhaust gas regenerative heating. (author)

  10. Acoustic position finding of partial discharges in transformers. Combination of partial discharge measurement technology with 3D visualization; Akustische Ortung von Teilentladungen in Transformatoren. TE-Messtechnik und 3-D-Visualisierung kombiniert

    Energy Technology Data Exchange (ETDEWEB)

    Kraetge, Alexander; Hoek, Stefan [Omicron Electronics GmbH, Klaus (Austria)

    2013-11-01

    A new measuring system facilitates the detection of partial discharges in transformers by means of the fully synchronous combination of measurement technology for electrical partial discharges with intuitive 3D visualization of the test object. The contribution under consideration describes the application of this system with examples from the measurement practice.

  11. Technology adoption and the impact on average productivity

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.; Zeng, D.; Zilberman, D.

    2011-01-01

    In this paper, a framework is developed to analyze how the specifications of new technologies and the heterogeneity of micro-units of production affect the input use, the adoption pattern, and the productivity of inputs. It shows that asset-productivity-enhancing (APE) technologies tend to be

  12. Agent Technology in Agile Multiparallel Manufacturing and Product Support

    NARCIS (Netherlands)

    van Moergestel, L.J.M.

    2014-01-01

    The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S PETROTAC

    Science.gov (United States)

    Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S TECHSUPPRESS

    Science.gov (United States)

    Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

  15. Identification of key nitrous oxide production pathways in aerobic partial nitrifying granules.

    Science.gov (United States)

    Ishii, Satoshi; Song, Yanjun; Rathnayake, Lashitha; Tumendelger, Azzaya; Satoh, Hisashi; Toyoda, Sakae; Yoshida, Naohiro; Okabe, Satoshi

    2014-10-01

    The identification of the key nitrous oxide (N2O) production pathways is important to establish a strategy to mitigate N2O emission. In this study, we combined real-time gas-monitoring analysis, (15)N stable isotope analysis, denitrification functional gene transcriptome analysis and microscale N2O concentration measurements to identify the main N2O producers in a partial nitrification (PN) aerobic granule reactor, which was fed with ammonium and acetate. Our results suggest that heterotrophic denitrification was the main contributor to N2O production in our PN aerobic granule reactor. The heterotrophic denitrifiers were probably related to Rhodocyclales bacteria, although different types of bacteria were active in the initial and latter stages of the PN reaction cycles, most likely in response to the presence of acetate. Hydroxylamine oxidation and nitrifier denitrification occurred, but their contribution to N2O emission was relatively small (20-30%) compared with heterotrophic denitrification. Our approach can be useful to quantitatively examine the relative contributions of the three pathways (hydroxylamine oxidation, nitrifier denitrification and heterotrophic denitrification) to N2O emission in mixed microbial populations. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

  16. Production and partial characterization of lipases from a newly isolated Penicillium sp. using experimental design.

    Science.gov (United States)

    Wolski, E; Rigo, E; Di Luccio, M; Oliveira, J V; de Oliveira, D; Treichel, H

    2009-07-01

    The objective of this work was to investigate the lipase production by a newly isolated Penicillium sp., using experimental design technique, in submerged fermentation using a medium based on peptone, yeast extract, NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained. Lipase activity values of 9.5 U ml(-1) in 96 h of fermentation was obtained at the maximized operational conditions of peptone, yeast extract, NaCl and olive oil concentrations (g l(-1)) of 20.0, 5.0, 5.0 and of 10.0 respectively. The partial characterization of crude enzymatic extract obtained by submerged fermentation showed optimum activity at pH range from 4.9 to 5.5 and temperature from 37 degrees C to 42 degrees C. The crude extract maintained its initial activity at freezing temperatures up to 100 days. A newly isolated strain of Penicillium sp. used in this work yielded good lipase activities compared to the literature. The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. New lipase producers are relevant to finding enzymes with different catalytic properties of commercial interest could be obtained, without using genetically modified organisms (GMO).

  17. Production, Partial Purification and Characterization of Protease From Irradiated Streptomyces Spp

    International Nuclear Information System (INIS)

    Botros, H.W.; Ahmed, A.S.

    2011-01-01

    Production and partial purification of protease by the irradiated Streptomyces spp. was the aim of this study. Streptomyces spp. was allowed to grow in culture broth of 4% shrimp shells for purpose of inducing protease enzymes. Optimal conditions for protease production were 30 degree C, 0.3 kGy, ph 7, 5x10 4 /ml inoculum size and 7 days incubation period. Protease was purified by 80% ammonium sulphate saturation which exhibited 8.7 U/ml enzyme activity. Column chromatography using sephadex G-200 exerted 23.3 U/ml enzyme activity from pooled fraction (13-16). The molecular mass of protease was determined to be 39 kDa by SDS-PAGE. The enzyme was more stable over a wide range of ph 6-8 and temperature up to 40 degree C. The produced protease was activated by Ca, Mn and FeCl 2 and completely inhibited by ethylene-diamin tetraacetic acid (EDTA) at concentration of 1000 μg/ml

  18. Abstract structure of partial function $*$-algebras over semi-direct product of locally compact groups

    Directory of Open Access Journals (Sweden)

    Arash Ghaani Farashahi

    2015-12-01

    Full Text Available This article presents a unified approach to the abstract notions of partial convolution and involution in $L^p$-function spaces over semi-direct product of locally compact groups. Let $H$ and $K$ be locally compact groups and $tau:Hto Aut(K$ be a continuous homomorphism.  Let $G_tau=Hltimes_tau K$ be the semi-direct product of $H$ and $K$ with respect to $tau$. We define left and right $tau$-convolution on $L^1(G_tau$ and we show that, with respect to each of them, the function space $L^1(G_tau$ is a Banach algebra. We define $tau$-convolution as a linear combination of the left and right $tau$-convolution and we show that the $tau$-convolution is commutative if and only if $K$ is abelian. We prove that there is a $tau$-involution on $L^1(G_tau$ such that with respect to the $tau$-involution and $tau$-convolution, $L^1(G_tau$ is a non-associative Banach $*$-algebra. It is also shown that when $K$ is abelian, the $tau$-involution and $tau$-convolution make $L^1(G_tau$ into a Jordan Banach $*$-algebra. Finally, we also present the generalized notation of $tau$-convolution for other $L^p$-spaces with $p>1$.

  19. Research on Digital Product Modeling Key Technologies of Digital Manufacturing

    Institute of Scientific and Technical Information of China (English)

    DING Guoping; ZHOU Zude; HU Yefa; ZHAO Liang

    2006-01-01

    With the globalization and diversification of the market and the rapid development of Information Technology (IT) and Artificial Intelligence (AI), the digital revolution of manufacturing is coming. One of the key technologies in digital manufacturing is product digital modeling. This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle, then researches on the three critical technologies of digital modeling in digital manufacturing-product modeling, standard for the exchange of product model data and digital product data management. And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features, applies STEP as data exchange mechanism, and establishes PDM system to manage the large amount, complicated and dynamic product data to implement the product digital model data exchange, sharing and integration.

  20. Technological challenges in thermal plasma production

    International Nuclear Information System (INIS)

    Ramakrishnan, S.

    1995-01-01

    Thermal plasmas, generated by electric arc discharges, are used in a variety of industrial applications. The electric arc is a constricted electrical discharge with a high temperature in the range 6000-25,000 K. These characteristics are useful in plasma cutting, spraying, welding and specific areas of material processing. The thermal plasma technology is an enabling process technology and its status in the market depends upon its advantages over competing technologies. A few technological challenges to enhance the status of plasma technology are to improve the utilisation of the unique characteristics of the electric arc and to provide enhanced control of the process. In particular, new solutions are required for increasing the plasma-material interaction, controlling the electrode roots and controlling the thermal power generated by the arcing process. In this paper, the advantages of plasma technology, its constraints and future challenges for technology developments are highlighted. 36 refs., 14 figs

  1. The syngas production by partial oxidation using a homogeneous charge compression ignition engine

    International Nuclear Information System (INIS)

    Yang, Yoon Cheol; Lim, Mun Sup; Chun, Young Nam

    2009-01-01

    It is essential to develop the environment-friendly alternative energies urgently considering the limited fossil fuel and the global warming caused by environmental destruction. In this research, the new technology was studied to produce syngas from methane or simulated biogas with a HCCI reforming engine. The purpose is to provide the basics for the research on biogas treatment mainly comprising of methane and carbon dioxide, the cause of global warming. This experiment was conducted on the changes in syngas concentration according to the variations of oxygen/methane ratio, total flow rate, intake heating temperature, CO 2 in mixture and oxygen enrichment with partial oxidation. Through the parametric screening studies, optimum conditions and their results in this study was taken as follows; The maximum content of syngas was; 27.4% at 0.3 of oxygen/methane ratio, 32.38% at 117.3 L/min of total flow rate, and 35.83% at 355 C of intake heating temperature. 41.06% of syngas was produced at 50.33% of oxygen enrichment ratio. (author)

  2. PRODUCTION AND PARTIAL CHARACTERIZATION OF PECTINASES FROM MANGO PEELS BY Aspergillus tamarii

    Directory of Open Access Journals (Sweden)

    Tivkaa Amande

    2013-08-01

    Full Text Available Pectinases are a group of enzymes that are able to breakdown or transform pectin. Sources of pectinase comprise a wide variety of bacteria, yeast and filamentous fungi, especially Aspergillus sp. In this study pectinases (polygalacturonase and pectin lyase were produced from mango peels by Aspergillus tamarii in solid state fermentation and a fraction of the crude enzyme solution obtained by ultracentrifugation was used for partial characterization assay. The maximum polygalacturonase production was 141.0095 U/g at day 3, 6 and 9 of incubation while the maximum pectin lyase production was 5670.50 U/g obtained at day 6. The optimum temperature and pH for polygalacturonase activity was between 40 – 70oC and 5.0 respectively while that of pectin lyase was 60oC and 7.5 respectively. The polygalacturonase produced was stable between pH 3.6 – 10.0 and at a temperature range of 30 – 70oC while the pectin lyase was stable between pH 7.0 – 8.5 and at 40oC. Na+, Mn+, Cu2+ and Zn2+ caused a significant increase in the activity of polygalacturonase whereas Fe2+ and Mg2+ caused a significant decrease in its activity (P≤0.05. The activity of pectin lyase was significantly increased by Fe2+, Mn+ and Zn2+ but significantly decreased by Cu2+, Mg2+ and Na+ (P≤0.05. Mango peel is a cheap, available and valuable substrate for pectinase production which could be useful for industrial applications especially in the food industry for processing fruit juices.

  3. Production Well Performance Enhancement using Sonication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Adewumi, Michael A; Ityokumbul, M Thaddeus; Watson, Robert W; Eltohami, Eltohami; Farias, Mario; Heckman, Glenn; Houlihan, Brendan; Karoor, Samata Prakash; Miller, Bruce G; Mohammed, Nazia; Olanrewaju, Johnson; Ozdemir, Mine; Rejepov, Dautmamed; Sadegh, Abdallah A; Quammie, Kevin E; Zaghloul, Jose; Hughes, W Jack; Montgomery, Thomas C

    2005-12-31

    The objective of this project was to develop a sonic well performance enhancement technology that focused on near wellbore formation damage. In order to successfully achieve this objective, a three-year project was defined. The entire project was broken into four tasks. The overall objective of all this was to foster a better understanding of the mechanisms involved in sonic energy interactions with fluid flow in porous media and adapt such knowledge for field applications. The fours tasks are: • Laboratory studies • Mathematical modeling • Sonic tool design and development • Field demonstration The project was designed to be completed in three years; however, due to budget cuts, support was only provided for the first year, and hence the full objective of the project could not be accomplished. This report summarizes what was accomplished with the support provided by the US Department of Energy. Experiments performed focused on determining the inception of cavitation, studying thermal dissipation under cavitation conditions, investigating sonic energy interactions with glass beads and oil, and studying the effects of sonication on crude oil properties. Our findings show that the voltage threshold for onset of cavitation is independent of transducer-hydrophone separation distance. In addition, thermal dissipation under cavitation conditions contributed to the mobilization of deposited paraffins and waxes. Our preliminary laboratory experiments suggest that waxes are mobilized when the fluid temperature approaches 40°C. Experiments were conducted that provided insights into the interactions between sonic wave and the fluid contained in the porous media. Most of these studies were carried out in a slim-tube apparatus. A numerical model was developed for simulating the effect of sonication in the nearwellbore region. The numerical model developed was validated using a number of standard testbed problems. However, actual application of the model for scale

  4. Alcohol, biomass energy: technological and economical aspects of production

    International Nuclear Information System (INIS)

    Ometto, Joao Guilherme Sabino

    1993-01-01

    This paper presents some technological and economical aspects of sugar cane and alcohol production in Brazil since 1975 until nowadays. The evolution of their production is analysed and the relationship between cost-benefit and ethanol consumption is discussed

  5. Determinants And Impacts Of Poultry Production Technologies On ...

    African Journals Online (AJOL)

    Determinants And Impacts Of Poultry Production Technologies On Productivity ... unbalanced feeding of poultry and low level of education of poultry farmers. ... were suggested by the study as a means of consolidating the gains of the impact.

  6. Production Situation and Technology Prospect of Medical Isotopes

    Directory of Open Access Journals (Sweden)

    GAO Feng;LIN Li;LIU Yu-hao;MA Xing-jun

    2016-10-01

    Full Text Available The isotope production technology was overviewed, including traditional and newest technology. The current situation of medical isotope production was introduced. The problems faced by isotope supply and demand were analyzed. The future development trend of medical isotopes and technology prospect were put forward. As the most populous country, nuclear medicine develops rapidly, however, domestic isotope mainly relies on imports. The highly productive and relatively safe MIPR is expected to be an effective way to breakthrough the bottleneck of the development of nuclear medicine. Traditional isotope production technologies with reactor can be improved. It's urgent to research and promote new isotope production technologies with reactor. Those technologies which do not depend on reactor will have a bright market prospects.

  7. 76 FR 45547 - Notice of Intent To Grant Partially Exclusive License Between the National Energy Technology...

    Science.gov (United States)

    2011-07-29

    ... the invention. DOE intends to grant the license, upon a final determination in accordance with 35 U.S... its intent to grant a partially exclusive license to practice the inventions described and claimed in... in Newton, MA. The inventions are owned by United States of America, as represented by DOE. DATES...

  8. Technology of pastry products for healthy nutrition purposes

    Directory of Open Access Journals (Sweden)

    Zavadynska Olena

    2016-04-01

    Full Text Available The article considers the possibility of using the carrot puree and oil from pumpkin seeds in the preparation of pastry product. Production technology and regulatory documentation for pastry products were developed and nutritional value of products was investigated.

  9. Technology geography: studying the relationships between technology, location and productivity

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    Operations management, international management, public policy and economic geography are scientific areas which come together in the study of international technology transfer. This study shows how each of these areas has its own central issues but also has specific parts that are relevant for

  10. Adoption of innovative production technologies in the road construction industry

    NARCIS (Netherlands)

    Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

    2007-01-01

    New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

  11. effectiveness of technological options for minimising production risks

    African Journals Online (AJOL)

    ACSS

    preferred technologies in reducing production risk related to climate variability in Eastern Uganda. Data for this study were ..... Set of technological options employed by farmers to reduce climate-induced production risk. Dummy = 1 if farmer. 0.71. 0.46 ..... cation exchange capacity for holding nutrients against leaching loss.

  12. Farm Technologies and Production Risk in the Face of Climate ...

    African Journals Online (AJOL)

    In countries where insurance and credit markets are thin or missing, production and consumption risks play a critical role in the choice and use of production inputs and adoption of new farm technologies. This paper investigated the effect of selected farm technologies and their risk implications in different rainfall patterns of ...

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  14. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  15. 75 FR 35851 - Partially Closed Meeting of the President's Council of Advisors on Science and Technology

    Science.gov (United States)

    2010-06-23

    ... manufacturing; science, technology, engineering, and mathematics (STEM) education; health information technology... only for substantive commentary on PCAST's work, not for business marketing purposes. Oral Comments: To... should contact Dr. Stine at least ten business days prior to the meeting so that appropriate arrangements...

  16. Technology and products of gas companies; Gas gaisha no Technology and Products

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-10

    This paper presents the latest technology and products of gas companies. `Newly developed gas table for one-push automatic fish broiling` of Tokyo Gas Co. `Catalytic technology for decomposing dioxin generated by incinerator to make it harmless` of Osaka Gas Co. `Newly developed strong and kindly shower head` of Tokyo Gas Co. By laying fish on a sensor in a grill and appropriately setting upper and lower heating levers, user can skillfully broil fish only by pushing an ignition button. A temperature sensor attached to the center of a grill catches a change in surface temperature of fish, and automatically sets an appropriate broiling time according to the kind and volume of fish. A finish buzzer and automatic extinction mechanism are prepared. The technology decomposes dioxin in exhaust gas of incinerators to make it harmless. The catalyst is prepared by dispersing noble metal or oxide of several angstroms into activated carbon fibers. The shower head can switch hot water power by a control handle

  17. Partial Oxidation Gas Turbine for Power and Hydrogen Co-Production from Coal-Derived Fuel in Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Rabovitser

    2009-06-30

    The report presents a feasibility study of a new type of gas turbine. A partial oxidation gas turbine (POGT) shows potential for really high efficiency power generation and ultra low emissions. There are two main features that distinguish a POGT from a conventional gas turbine. These are associated with the design arrangement and the thermodynamic processes used in operation. A primary design difference of the POGT is utilization of a non?catalytic partial oxidation reactor (POR) in place of a conventional combustor. Another important distinction is that a much smaller compressor is required, one that typically supplies less than half of the air flow required in a conventional gas turbine. From an operational and thermodynamic point of view a key distinguishing feature is that the working fluid, fuel gas provided by the OR, has a much higher specific heat than lean combustion products and more energy per unit mass of fluid can be extracted by the POGT expander than in the conventional systems. The POGT exhaust stream contains unreacted fuel that can be combusted in different bottoming ycle or used as syngas for hydrogen or other chemicals production. POGT studies include feasibility design for conversion a conventional turbine to POGT duty, and system analyses of POGT based units for production of power solely, and combined production of power and yngas/hydrogen for different applications. Retrofit design study was completed for three engines, SGT 800, SGT 400, and SGT 100, and includes: replacing the combustor with the POR, compressor downsizing for about 50% design flow rate, generator replacement with 60 90% ower output increase, and overall unit integration, and extensive testing. POGT performances for four turbines with power output up to 350 MW in POGT mode were calculated. With a POGT as the topping cycle for power generation systems, the power output from the POGT ould be increased up to 90% compared to conventional engine keeping hot section temperatures

  18. As Technologies for Nucleotide Therapeutics Mature, Products Emerge.

    Science.gov (United States)

    Beierlein, Jennifer M; McNamee, Laura M; Ledley, Fred D

    2017-12-15

    The long path from initial research on oligonucleotide therapies to approval of antisense products is not unfamiliar. This lag resembles those encountered with monoclonal antibodies, gene therapies, and many biological targets and is consistent with studies of innovation showing that technology maturation is a critical determinant of product success. We previously described an analytical model for the maturation of biomedical research, demonstrating that the efficiency of targeted and biological development is connected to metrics of technology growth. The present work applies this model to characterize the advance of oligonucleotide therapeutics. We show that recent oligonucleotide product approvals incorporate technologies and targets that are past the established point of technology growth, as do most of the oligonucleotide products currently in phase 3. Less mature oligonucleotide technologies, such as miRNAs and some novel gene targets, have not passed the established point and have not yielded products. This analysis shows that oligonucleotide product development has followed largely predictable patterns of innovation. While technology maturation alone does not ensure success, these data show that many oligonucleotide technologies are sufficiently mature to be considered part of the arsenal for therapeutic development. These results demonstrate the importance of technology assessment in strategic management of biomedical technologies. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  19. Information, Technology, and Information Worker Productivity

    OpenAIRE

    Aral, Sinan; Brynjolfsson, Erik; Van Alstyne, Marshall

    2009-01-01

    We econometrically evaluate information worker productivity at a midsize executive recruiting firm and assess whether the knowledge that workers accessed through their electronic communication networks enabled them to multitask more productively. We estimate dynamic panel data models of multitasking, knowledge networks, and productivity using several types of micro-level data: (a) direct observation of more than 125,000 email messages over a period of 10 months; (b) detailed accounting data o...

  20. Partial and total fish meal replacement by agricultural products in the diets improve sperm quality in African catfish (Clarias gariepinus)

    NARCIS (Netherlands)

    Nyina-wamwiza, L.; Milla, S.; Pierrard, M.A.; Rurangwa, E.; Mandiki, S.N.M.; Look, van K.J.W.; Kestemont, P.

    2012-01-01

    This study investigated the long-term effects of total and partial replacement of dietary fish meal (FM) by a mixture of agricultural products on sperm quality of African catfish Clarias gariepinus. Four isonitrogenous and isoenergetic diets were formulated containing graded levels of either 50% FM

  1. Evaluation of partial water reuse systems used for Atlantic salmon smolt production at the White River National Fish Hatchery

    Science.gov (United States)

    Eight of the existing 9.1 m (30 ft) diameter circular culture tanks at the White River National Fish Hatchery in Bethel, Vermont, were retrofitted and plumbed into two 8,000 L/min partial water reuse systems to help meet the region's need for Atlantic salmon (Salmo salar) smolt production. The part...

  2. Federalism and technological change in blood products.

    Science.gov (United States)

    Taylor, Mark Zachary

    2009-12-01

    Recent research has shown how federalism affects health care finance, health care reform, and health policy innovation. The purpose of this article is to extend this research program to study the linkages between federalism and technological change. It does so using comparative case studies spanning five countries to examine innovation and diffusion of two blood technologies-enzyme-linked immunosorbent assays (ELISA blood tests) and heat treatment-in response to the threat to the blood supply posed by HIV during the 1980s. Prior research has produced three contradictory models of the federalism-innovation relationship. This article attempts to resolve these contradictions, posits new hypotheses, and highlights sources of omitted variable bias that have important implications for understanding technological change. The case studies show that overall decentralization, rather than federalism alone, aids technological progress by allowing its supporters to "venue shop" around political resistance. Decentralization also makes the state less vulnerable to capture by status-quo interest groups. Moreover, political decentralization may have a positive effect on technological diffusion, but a far weaker effect on innovation. Thus, prior research that conflates these two effects should be revisited.

  3. Technology transfers, foreign investment and productivity spillovers

    DEFF Research Database (Denmark)

    Newman, Carol; Rand, John; Talbot, Theodore Purdendu

    2015-01-01

    This paper explores the relationship between foreign direct investment (FDI) and the productivity of host country domestic firms. We rely on a specially designed survey of over 4000 manufacturing firms in Vietnam, and separate out productivity gains along the supply chain (obtained through direct...

  4. Agricultural productivity growth and technology progress in ...

    African Journals Online (AJOL)

    The goal of this investigation was to analyze the impact of some variables of production(input) on agricultural productivity growth (output) in China over the period 1989-2002. To this aim, Cobb-Douglas function has been used. The methodology used in this study is correct and the resulting conclusion is that labor, capital ...

  5. Prediction of Biomass Production and Nutrient Uptake in Land Application Using Partial Least Squares Regression Analysis

    Directory of Open Access Journals (Sweden)

    Vasileios A. Tzanakakis

    2014-12-01

    Full Text Available Partial Least Squares Regression (PLSR can integrate a great number of variables and overcome collinearity problems, a fact that makes it suitable for intensive agronomical practices such as land application. In the present study a PLSR model was developed to predict important management goals, including biomass production and nutrient recovery (i.e., nitrogen and phosphorus, associated with treatment potential, environmental impacts, and economic benefits. Effluent loading and a considerable number of soil parameters commonly monitored in effluent irrigated lands were considered as potential predictor variables during the model development. All data were derived from a three year field trial including plantations of four different plant species (Acacia cyanophylla, Eucalyptus camaldulensis, Populus nigra, and Arundo donax, irrigated with pre-treated domestic effluent. PLSR method was very effective despite the small sample size and the wide nature of data set (with many highly correlated inputs and several highly correlated responses. Through PLSR method the number of initial predictor variables was reduced and only several variables were remained and included in the final PLSR model. The important input variables maintained were: Effluent loading, electrical conductivity (EC, available phosphorus (Olsen-P, Na+, Ca2+, Mg2+, K2+, SAR, and NO3−-N. Among these variables, effluent loading, EC, and nitrates had the greater contribution to the final PLSR model. PLSR is highly compatible with intensive agronomical practices such as land application, in which a large number of highly collinear and noisy input variables is monitored to assess plant species performance and to detect impacts on the environment.

  6. Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

    International Nuclear Information System (INIS)

    Hellman, H.L.

    2004-01-01

    Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

  7. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2000-05-01

    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production.

  8. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2000-05-01

    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production

  9. Technological innovations in sales of banking products

    Directory of Open Access Journals (Sweden)

    Semenyuta Оlga

    2016-03-01

    Full Text Available The article discusses the features of the remote client service related to the behavior of consumers of retail banking products in terms of the use of remote service channels. Analyze the level of awareness of the remote service channels and barriers considered use of remote service channels on the acquisition of retail banking products based on the segmentation of consumer groups. Based on the findings developed proposals to promote remote service channels using banking products in the retail segment of consumers.

  10. Partial-impregnation techniques in the production of wood-polymer composites through gamma irradiation

    International Nuclear Information System (INIS)

    Du Plessis, T.A.; Du Toit, G.S.; Jurriaanse, A.

    1977-04-01

    Radiation-processed wood-polymer composites produced from various partially impregnated Pinus species grown in South Africa were investigated and compared to a number of locally available noble hardwoods in respect of dimensional stability, hardness, homogeneity and weathering properties. This investigation clearly demonstrates that, through partial-impregnation techniques, wood-polymer composites can be formed from the locally grown Pinus species with a considerable saving in monomer costs without sacrificing most of the important physical properties of these materials [af

  11. Accelerating the transfer of improved production technologies ...

    African Journals Online (AJOL)

    Since 1988, epidemics of African cassava mosaic disease (ACMD) caused by a whitefly-transmitted geminivirus have caused severe devastation in Uganda resulting in food shortages and famine in some areas. In order to control the disease and restore food security in the country, appropriate technologies had to be ...

  12. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    are not completely defined. Yet, decisions need to be made during technology development on the capabilities to be provided through the development to fulfil future application requirements,provide a foundation for future products, and development of a production system capable of producing future products...

  13. Immobilization Technologies in Probiotic Food Production

    Directory of Open Access Journals (Sweden)

    Gregoria Mitropoulou

    2013-01-01

    Full Text Available Various supports and immobilization/encapsulation techniques have been proposed and tested for application in functional food production. In the present review, the use of probiotic microorganisms for the production of novel foods is discussed, while the benefits and criteria of using probiotic cultures are analyzed. Subsequently, immobilization/encapsulation applications in the food industry aiming at the prolongation of cell viability are described together with an evaluation of their potential future impact, which is also highlighted and assessed.

  14. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  15. Modern radioisotope production technologies for medicine

    International Nuclear Information System (INIS)

    Bechtold, V.; Schweickert, H.

    1989-01-01

    The advantages of the accelerator production of radioisotopes for medical purposes, are, above all, the high specific activity attainable as well as the possibility of the generation of nuclei with only a few neutrons which disintegrate due to β + emission or electron capture. It is, for example, possible to diagnostically utilize the developing long-range γ quanta by means of computerized tomography. The production of I-123 at the cyclotron of Karlsruhe (nuclear reaction, target, irradiation arrangement) as well as of ultra-pure I-123 with the help of compact cyclotrons, and the plant developed for this are described in brief. As another radioisotope which can be produced with the help of the compact cyclotron, Rb-81 is mentioned, the disintegration product Kr-81m of which is used in pulmonary diagnostics. (RB) [de

  16. Is the Mobile Phone a Disruptive Technology? A Partial Review of Evidence from Developing Countries

    NARCIS (Netherlands)

    Columbus, Simon

    2012-01-01

    The authors of this chapter provide an inter-disciplinary review of studies on economic impacts of mobile telephony in developing countries, giving particular attention to the disruptive potential of the technology and its associated social practices. Four major areas of impact are identified: the

  17. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  18. Assessment of material and technical resources of crop production technologies

    Directory of Open Access Journals (Sweden)

    V. M. Beylis

    2017-01-01

    Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

  19. Production of catechols : microbiology and technology

    NARCIS (Netherlands)

    Krab-Hüsken, L.

    2002-01-01

    Catechols play an important role in the fine-chemical and flavour industry, as well as in photography, dyeing fur, rubber and plastic production. Many of these compounds cannot easily be synthesised chemically, but some micro-organisms are capable of

  20. Environmental control technology in petroleum drilling and production

    International Nuclear Information System (INIS)

    Wojtanowicz, A.K.

    1997-01-01

    Environmental control technology (ECT) is process integrated and relates mainly to pollution prevention and risk assessment. Mechanisms of environmental impact in petroleum drilling, well completion and production, include the generation of waste, induction of toxicity or the creation of pathways for pollutant migration. The identification and evaluation of these mechanisms constitute two parts of the scope of ECT. A third part is the development of new techniques to comply with environmental requirements without prejudicing productivity. The basic concepts of the ECT approach are presented in this chapter. The approach is then used to analyse oilfield drilling and production processes. Environmental control components developed in these technologies are described. These include: the control of the volume and toxicity of drilling fluids; source separation technology in produced water cleaning; subsurface injection of oilfield waste slurries; containment technology in the integrity of petroleum wells; subsurface reduction of produced water; oilfield pit closure technology. (37 figures; 26 tables; 227 references) (UK)

  1. GROUP TECHNOLOGY IN CONTEXT OF THE PRODUCT CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    Lenka Debnárová

    2014-03-01

    Full Text Available In the intensive competitive environment of the global economy, the survival of even the most well-established the world manufacturers depends on the ability to improve continuously quality while reducing costs. The resulting higher productivity is the key to market leadership and gaining sustainable competitive advantage. This paper outlines a group technology and classification of products which improve productivity, quality, inventory management of a company and reduce production times.

  2. Fuel element production at BWX technologies

    International Nuclear Information System (INIS)

    Pace, Brett

    1997-01-01

    Effective July 1, 1997, the Government Group portion of the Babcock and Wilcox company was incorporated separately to become BWX Technologies, Inc. (BWXT) a wholly-owned subsidiary of the Babcock and Wilcox Company. The names of the divisions and other business units of the former Babcock and Wilcox Government Group (Advanced Systems Operations, Naval Nuclear Fuel Division, and Nuclear Equipment Division) will remain unchanged, but they are now known as divisions or business units of BWXT. The management of all units and their reporting relationships will likewise remain unchanged. (author)

  3. WASTE-FREE PRODUCTION TECHNOLOGY OF DRY MASHED POTATOES

    Directory of Open Access Journals (Sweden)

    G. V. Kalashnikov

    2015-01-01

    Full Text Available Summary. According to data on norms of consumption of vegetable production of scientific research institute of Food of the Russian Academy of Medical Science, potatoes win first place with norm of 120 kg a year on the person. In this regard much attention is paid to processing of potatoes that allows to prolong the term of its validity, and also to reduce the capacity of storages and to reduce transport transportations as 1 kg of a dry potatoes produсt is equivalent 7-8 kg of fresh potatoes. Thus industrial processing of potatoes on dry mashed potatoes allows to reduce losses of potatoes at storage and transportation, there is a possibility of enrichment of products vitamins and other useful components, its nutrition value remains better, conditions for complex processing of raw materials with full recycling and creations of stocks of products from potatoes on a crop failure case are created. Dry mashed potatoes are a product of long storage. On the basis of studying of the production technology of mashed potatoes the analysis of technological processes as sources of creation of waste, and the directions of recovery of secondary raw materials for complex waste-free technology of processing of potatoes are defined is provided. The waste-free technological scheme of processing of potatoes and production of dry instant mashed potatoes on the basis of dehydration and moisture thermal treatment a component providing recovery of secondary carbohydrate content raw materials in the form of waste of the main production is developed. The main stages of production of dry instant mashed potatoes are described. It is offered the technological scheme of a production line of mashed potatoes on the basis of waste-free technology. Advantages of the offered waste-free production technology of dry instant mashed potatoes with processing of secondary starch-containing raw materials are given.

  4. Technology for production of shelf stable fruit cubes

    International Nuclear Information System (INIS)

    Mishra, B.B.; Jain, M.P.; Sharma, A.

    2009-01-01

    A technology has been developed for the production of intermediate moisture fruit cubes using a combination of osmotic dehydration and infrared drying. Fruits like pineapple, papaya, mango, banana and apple can be successfully converted into intermediate moisture products in the form of fruit cubes using this technology. The fruit cubes can blend very well as natural nutritious supplements with breakfast cereals and in certain food preparations like ice creams, milk shakes, jellies and custards. The product is microbiologically safe for consumption and can be stored at ambient storage condition for more than six months. This technology is an effective alternative for post harvest processing and preservation of ripened fruits. Fruit jam is an additional by-product generated by the process. This technology has been transferred to TT and CD, BARC

  5. The fundamentals of the radiation thermal technology for cement production

    International Nuclear Information System (INIS)

    Abramson, I.G.; Kapralova, R.M.; Nikiforov, Yu.V.; Egorov, G.B.; Vaisman, A.F.

    1995-01-01

    The fundamentals of principally new radiation thermal way of cement production are presented. The peculiarities of qualities and structure of clinker obtained by this way are given. The technical economic advantages of the new technology are shown

  6. Pretreatment Technologies of Lignocellulosic Materials in Bioethanol Production Process

    Directory of Open Access Journals (Sweden)

    Mohamad Rusdi Hidayat

    2013-06-01

    Full Text Available Bioethanol is one type of biofuel that developed significantly. The utilization of bioethanol is not only limited for fuel, but also could be used as material for various industries such as pharmaceuticals, cosmetics, and food. With wide utilization and relatively simple production technology has made bioethanol as the most favored biofuel currently. The use of lignocellulosic biomass, microalgae, seaweeds, even GMO (Genetically modified organisms as substrates for bioethanol production has been widely tested. Differences in the materials eventually led to change in the production technology used. Pretreatment technology in the bioethanol production using lignocellulosic currently experiencing rapid development. It is a key process and crucial for the whole next steps. Based on the advantages and disadvantages from all methods, steam explotion and liquid hot water methods are the most promising  pretreatment technology available.

  7. TECHNOLOGICAL PROCESSES OF PRODUCTION OF THE MASS FUNCTION CAST BARS

    Directory of Open Access Journals (Sweden)

    A. N. Krutilin

    2012-01-01

    Full Text Available A number of scientifically grounded technical decisions, the whole set of which has enabled to create technological processes of production of high-quality cast bars of mass appointment is offered.

  8. [Technology transfer to the facility for production of medicines].

    Science.gov (United States)

    Beregovykh, V V; Spitskiĭ, O P

    2013-01-01

    Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

  9. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  10. OPTIMIZATION OF THE TECHNOLOGICAL PROCESS OF THE FERROCHROME PRODUCTION OUT OF WASTE OF TANNING PRODUCTION

    Directory of Open Access Journals (Sweden)

    O. S. Komarov

    2004-01-01

    Full Text Available The article touches upon the solving of the actual problem — production in conditions of Belarus of ferrochrome of the leather production wastes, that allows to solve several technological problems and to reduse import of expensive ferroallows.

  11. Palm H-FAME Production through Partially Hydrogenation using Nickel/Carbon Catalyst to Increase Oxidation Stability

    Directory of Open Access Journals (Sweden)

    Ramayeni Elsa

    2018-01-01

    Full Text Available One of the methods to improve the oxidation stability of palm biodiesel is through partially hydrogenation. The production using Nickel/Carbon catalyst to speed up the reaction rate. Product is called Palm H-FAME (Hydrogenated FAME. Partial hydrogenation breaks the unsaturated bond on FAME (Fatty Acid Methyl Ester, which is a key component of the determination of oxidative properties. Changes in FAME composition by partial hydrogenation are predicted to change the oxidation stability so it does not cause deposits that can damage the injection system of diesel engine, pump system, and storage tank. Partial hydrogenation is carried out under operating conditions of 120 °C and 6 bar with 100:1, 100:3, 100:5, 100:10 % wt catalyst in the stirred batch autoclave reactor. H-FAME synthesis with 100:5 % wt Ni/C catalyst can decrease the iodine number which is the empirical measure of the number of unsaturated bonds from 91.78 to 82.38 (g-I2/100 g with an increase of oxidation stability from 585 to 602 minutes.

  12. [Genotyping of ABO Blood Group in Partial Population of Yunnan Province by SNaPshot Technology].

    Science.gov (United States)

    Yu, S X; Zeng, F M; Jin, Y Z; Wan, H J; Zhai, D; Xing, Y M; Cheng, B W

    2017-06-01

    To detect the genotype of ABO blood group by SNaPshot technology. DNA were extracted from the peripheral blood samples with known blood groups (obtained by serology) of 107 unrelated individuals in Yunnan. Six SNP loci of the 261th, 297th, 681th, 703th, 802th, and 803th nucleotide positions were detected by SNaPshot Multiplex kit, and relevant genetics parameters were calculated. In 107 blood samples, the allele frequencies of types A, B, O A , and O G were 0.355 1, 0.168 2, 0.230 0 and 0.247 6, respectively, while that of types A G and cis AB were not detected. The genotyping results of ABO blood group were consistent with that of serologic testing. SNaPshot technology can be adapted for genotyping of ABO blood group. Copyright© by the Editorial Department of Journal of Forensic Medicine

  13. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  14. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  15. Production of nanomaterials: physical and chemical technologies

    International Nuclear Information System (INIS)

    Giorgi, Leonardo; Salernitano, Elena

    2015-01-01

    Are define nanomaterials those materials which have at least one dimension in the range between 1 and 100 nm. By the term nanotechnology refers, instead, to the study of phenomena and manipulation of materials at the atomic and molecular level. The materials brought to the nanometric dimensions take particular chemical-physical properties different from the corresponding conventional macro materials. Speaking about the structure of nanoscale, you can check some basic properties materials (eg. Melting temperature, magnetic and electrical properties) without changing its chemical composition. In this perspective are crucial knowledge and control of production processes in order to design and get the nanomaterial more suitable for a specific application. For this purpose, it describes a series of processes of production of nanomaterials with application examples. [it

  16. International and intranational technological spillovers and productivity growth in China

    OpenAIRE

    Fu, Xiaolan; Gong, Yundan

    2009-01-01

    Technological spillovers from foreign direct investment (FDI) have been regarded as a major source of technical progress and productivity growth. This paper explores the role of international and intranational technological spillovers from FDI in technical change, efficiency improvement, and total factor productivity growth in Chinese manufacturing firms using a recent Chinese manufacturing firm-level panel data set over the 2001–05 period. International industry-specific research and develop...

  17. Technology transfer in a horizontally differentiated product-market

    NARCIS (Netherlands)

    Mukherjee, A.; Balasubramanian, N.

    1999-01-01

    This paper considers technology transfer in a Cournot-duopoly market where the firms produce horizontally differentiated products. It turns out that without the threat of imitation from the licensee, the licenser always transfers its best technology. However, the patent licensing contract consists

  18. Machine Vision Technology for the Forest Products Industry

    Science.gov (United States)

    Richard W. Conners; D.Earl Kline; Philip A. Araman; Thomas T. Drayer

    1997-01-01

    From forest to finished product, wood is moved from one processing stage to the next, subject to the decisions of individuals along the way. While this process has worked for hundreds of years, the technology exists today to provide more complete information to the decision makers. Virginia Tech has developed this technology, creating a machine vision prototype for...

  19. Increased wood-fiber production: technology, economics, and ecology

    Science.gov (United States)

    William R. Bentley

    1973-01-01

    Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

  20. Influence of final baking technologies in partially baked frozen gluten-free bread quality.

    Science.gov (United States)

    Aguilar, Núria; Albanell, Elena; Miñarro, Begoña; Gallardo, Joan; Capellas, Marta

    2015-03-01

    The effect of final baking in convection oven (FBC), microwave oven (FBM), and microwave oven with susceptor packaging material (FBMS) on partially baked (PB) frozen gluten-free bread characteristics was investigated. Specific volume and crust color of loaves were measured at day 0. Bread moisture, water activity, and crumb and crust texture (at 15, 45, and 90 min after baking) were analyzed at day 0 and after 28 d of frozen storage (-18 °C). Volatile compounds from breads baked in convection oven or microwave oven with susceptor packaging material were also evaluated. Bread finally baked in convection oven or in microwave oven with susceptor packaging increased crust browning. Crumb and roll hardness increased with time after final baking (measured at 15, 45, 90 min) and after 28 d of frozen storage. Bread finally baked in microwave oven was the hardest, due to high water losses. At day 0, bread finally baked in convection oven had softer crumb than bread finally baked in microwave oven with susceptor packaging but, after 28 d of frozen storage, there were no differences between them. Moreover, FBC and FBMS rendered gluten-free breads that could not be distinguished in a triangular test and had the same volatile compounds profile. In conclusion, FBMS could be an alternative to FBC. © 2015 Institute of Food Technologists®

  1. Methods for improving mechanical properties of partially stabilized zirconia and the resulting product

    International Nuclear Information System (INIS)

    Aronov, V.A.

    1987-01-01

    A method for improving mechanical surface properties of a rigid body comprising partially stabilized zirconia as a constituent is described comprising the following steps: (i) providing a rigid body having an exposed surface and an interior volume; (ii) subjecting the exposed surface region of partially stabilized zirconia to external heating to heat the exposed surface region to 1100 0 C-1600 0 C without heating the interior volume above 500 0 C-800 0 C; and (iii) cooling the rigid body to a temperature of less than 500 0 C to cause a portion of the exposed surface region to transform from the tetragonal lattice modification to the monoclinic lattice modification, thereby creating a compressive stress field in the exposed surface region and improving the mechanical surface properties of the exposed surface region. In a ceramic body comprising a first exposed region of a partially stabilized zirconia, and a second region of a partially stabilized zirconia at an interior portion of the ceramic body, the improvement is described comprising the ceramic body having in the first, exposed region a greater percentage of the monoclinic lattice modification than in the second region; having in the first, exposed region 5 percent to 100 percent in the monoclinic lattice modification; and having a molded surface finish in the first, exposed region; the first, exposed region being subjected to a compressive field resulting from the greater percentage of the monoclinic lattice modification

  2. OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology

    Science.gov (United States)

    Zaharia, C.; Gabor, A.; Sinescu, C.; Topala, F. I.; Negrutiu, M. L.; Levai, C. M.; Duma, V. F.; Bradu, A.; Podoleanu, A. Gh.

    2016-03-01

    Introduction. Dental ceramics show better biocompatibility and aesthetic properties in dental constructs with regard to metals. However, they also have an insufficient mechanical stability, as well as low resistance limits due to their fragility. Taking into account these aspects, glass infiltrated with ceramic materials such as alumina (i.e., zirconiareinforced ceramics) is being nowadays considered a better material for full fixed partial prostheses (FPPs) than ceramics: the former has a higher mechanical resistance, which makes it more appropriate for restoration areas, where there is an increased mechanical stress. The interest for zirconia is growing due both to its resistance and to the possibility to develop such prostheses using the CAD/CAM technology. Materials and methods. 24 all ceramic FPPs created with CAD/CAM technology were used. The models were scanned with Zeno Wieland Scanner, a one touch scanning machine which requires between 45-60 s for a full model scan. The scanner provides 3 axis-architecture and automatic data processing. The zirconia infrastructures resulted from milling zirconia green disks in Wieland units, followed by the deposition of ceramic masses and then by burning procedures. All the samples were assessed with a Time Domain Optical Coherence Tomography (TD-OCT) system working at a wavelenght of 1300 nm. Using OCT investigations, material defects were detected in the areas of maximal tension, i.e. the connectors, the oclusal, and the cervical areas. These samples with defects in the above areas have not been considered for the study further on. Finally, the samples were loaded in a MultiTest 5 i Mecmesin system and tested until fracture occurred. The MultiTest 5-i creates tensile and compression forces of up to 5 kN. Results and discussions. All the test samples survived a dynamic load of 1.2 x 107 cycles and a thermal cycle mixer simulator version; signs of failure in terms of fracture lines were observed in all samples. The

  3. Simultaneous Saccharification and Fermentation and Partial Saccharification and Co-Fermentation of Lignocellulosic Biomass for Ethanol Production

    Science.gov (United States)

    Doran-Peterson, Joy; Jangid, Amruta; Brandon, Sarah K.; Decrescenzo-Henriksen, Emily; Dien, Bruce; Ingram, Lonnie O.

    Ethanol production by fermentation of lignocellulosic biomass-derived sugars involves a fairly ancient art and an ever-evolving science. Production of ethanol from lignocellulosic biomass is not avant-garde, and wood ethanol plants have been in existence since at least 1915. Most current ethanol production relies on starch- and sugar-based crops as the substrate; however, limitations of these materials and competing value for human and animal feeds is renewing interest in lignocellulose conversion. Herein, we describe methods for both simultaneous saccharification and fermentation (SSF) and a similar but separate process for partial saccharification and cofermentation (PSCF) of lignocellulosic biomass for ethanol production using yeasts or pentose-fermenting engineered bacteria. These methods are applicable for small-scale preliminary evaluations of ethanol production from a variety of biomass sources.

  4. Implementation of NFC technology for industrial applications: case flexible production

    Science.gov (United States)

    Sallinen, Mikko; Strömmer, Esko; Ylisaukko-oja, Arto

    2007-09-01

    Near Field communication (NFC) technology enables a flexible short range communication. It has large amount of envisaged applications in consumer, welfare and industrial sector. Compared with other short range communication technologies such as Bluetooth or Wibree it provides advantages that we will introduce in this paper. In this paper, we present an example of applying NFC technology to industrial application where simple tasks can be automatized and industrial assembly process can be improved radically by replacing manual paperwork and increasing trace of the products during the production.

  5. PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Josef Sedlak

    2015-08-01

    Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

  6. Technology for Salt Production in the Mixteca Alta

    Directory of Open Access Journals (Sweden)

    Ricardo Antonio León Hernández

    2015-01-01

    Full Text Available Salt production in the Mixteca Alta is a traditional means of production from prehispanic period, which, despite the economic transformation processes in the colonial period, remained significant features of the traditional process, based on the documented similar models from other productive regions in Mexico. The salt in the novohispanic period was considered a major consumption economic asset due to its use in production processes for the production of new economic products that supported the economy of preindustrial societies (Terán, 2011, p. 71; Williams, 2008. Technology refers to the knowledges for solving human needs arising lifestyle of the cultural groups that develop them. The resources of the natural environment underpin the means of labor that man requires to perform its activities, including economic. The means of production and production processes are technological developments, which involve elements of tangible and intangible order. The study of work processes for salt extraction, are significantly related to the processes of technological evolution that man has developed for the use of natural resources. The economic activities of the primary sector are examples of how humans culturally and economically were inserted in the natural environment (Malpica, 2008, p. 59. This analysis presents a historiographical approach to the study of the processes and the technology required for the extraction of salt in the Mixteca Alta.

  7. Does new product growth accelerate across technology generations?

    NARCIS (Netherlands)

    S. Stremersch (Stefan); E. Muller (Erwin); R. Peres (Renana)

    2010-01-01

    textabstractThe academic literature on the growth acceleration of new products presents a paradox. On the one hand, the diffusion literature concludes that more recently introduced products show faster diffusion than older ones. On the other hand, technology generation literature argues that growth

  8. Identifying and Researching Market Opportunities for New High Technology Products.

    Science.gov (United States)

    Dunstan, Peter

    Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

  9. Hydrogen production with short contact time. Catalytic partial oxidation of hydrocarbons and oxygenated compounds: Recent advances in pilot- and bench-scale testing and process design

    Energy Technology Data Exchange (ETDEWEB)

    Guarinoni, A.; Ponzo, R.; Basini, L. [ENI Refining and Marketing Div., San Donato Milanese (Italy)

    2010-12-30

    ENI R and D has been active for fifteen years in the development of Short Contact Time - Catalytic Partial Oxidation (SCT-CPO) technologies for producing Hydrogen/Synthesis Gas. From the beginning the experimental work addressed either at defining the fundamental principles or the technical and economical potential of the technology. Good experimental responses, technical solutions' simplicity and flexibility, favourable techno-economical evaluations promoted the progressive widening of the field of the investigations. From Natural Gas (NG) the range of ''processable'' Hydrocarbons extended to Liquefied Petroleum Gas (LPG) and Gasoils, including those characterised by high levels of unsaturated and sulphurated molecules and, lately, to other compounds with biological origin. The extensive work led to the definition of different technological solutions, grouped as follows: Technology 1: Air Blown SCT-CPO of Gaseous Hydrocarbons and/or Light Compounds with biological origin Technology 2: Enriched Air/Oxygen Blown SCT-CPO of Gaseous Hydrocarbons and/or Light Compounds with biological origin Technology 3: Enriched Air/Oxygen Blown SCT-CPO of Liquid Hydrocarbons and/or Compounds with biological origin Recently, the licence rights on a non-exclusive basis for the commercialisation of SCT-CPO based processes for H{sub 2}/Synthesis gas production from light hydrocarbons with production capacity lower than 5,000 Nm{sup 3}/h of H{sub 2} or 7,500 Nm3/h of syngas have been assigned to two external companies. In parallel, development of medium- and large-scale plant solutions is progressing within the ENI group framework. These last activities are addressed to the utilisation of SCT-CPO for matching the variable Hydrogen demand in several contexts of oil refining operation. This paper will report on the current status of SCT-CPO with a focus on experimental results obtained, either at pilot- and bench- scale level. (orig.)

  10. Productivity effects of technology diffusion induced by an energy tax

    International Nuclear Information System (INIS)

    Walz, R.

    1999-01-01

    In the political discussion, the economy-wide effects of an energy tax have gained considerable attention. So far, macroeconomic analyses have focused on either (positive or negative) costs triggered by an energy tax, or on the efficiency gains resulting from new energy taxes combined with lower distortionary taxes. By contrast, the innovative effects of climate protection measures have not yet been thoroughly analysed. This paper explores the productivity effects of a 50 per cent energy tax in the German industry sector employing a technology-based, three-step bottom-up approach. In the first step, the extensive IKARUS database is used to identify the technological adjustments arising from an energy tax. In the second step, the technologies are classified into different clusters. In the third step, the productivity effects generated by the technological adjustments are examined. The results imply that an energy tax induces mainly sector-specific and process-integrated technologies rather than add-on and cross-cutting technologies. Further, it is shown that the energy-saving technologies tend to increase productivity. This is particularly the case for process-integrated, sector specific technologies. (author)

  11. A Technological Overview of Biogas Production from Biowaste

    Directory of Open Access Journals (Sweden)

    Spyridon Achinas

    2017-06-01

    Full Text Available The current irrational use of fossil fuels and the impact of greenhouse gases on the environment are driving research into renewable energy production from organic resources and waste. The global energy demand is high, and most of this energy is produced from fossil resources. Recent studies report that anaerobic digestion (AD is an efficient alternative technology that combines biofuel production with sustainable waste management, and various technological trends exist in the biogas industry that enhance the production and quality of biogas. Further investments in AD are expected to meet with increasing success due to the low cost of available feedstocks and the wide range of uses for biogas (i.e., for heating, electricity, and fuel. Biogas production is growing in the European energy market and offers an economical alternative for bioenergy production. The objective of this work is to provide an overview of biogas production from lignocellulosic waste, thus providing information toward crucial issues in the biogas economy.

  12. Traditional technologies of fuels production for air-jet engines

    Directory of Open Access Journals (Sweden)

    Бойченко С. В.

    2013-07-01

    Full Text Available Available energy resources for various fuels, mainly for gas-turbine engines are presented in the given article. Traditional technologies for jet fuels production from nonrenewable raw materials, such as crude oil, coal, natural gas, oil-shales and others are analyzed in details. Cause and effect relationship between production and use of such fuels and their impact on natural environment is defined. The timeliness and necessity for development of alternative technologies of aviation biofuels production are determined in the given article.

  13. Technology for the product and process data base

    Science.gov (United States)

    Barnes, R. D.

    1984-01-01

    The computerized product and process data base is increasingly recognized to be the cornerstone component of an overall system aimed at the integrated automation of the industrial processes of a given company or enterprise. The technology needed to support these more effective computer integrated design and manufacturing methods, especially the concept of 3-D computer-sensible product definitions rather than engineering drawings, is not fully available and rationalized. Progress is being made, however, in bridging this technology gap with concentration on the modeling of sophisticated information and data structures, high-performance interactive user interfaces and comprehensive tools for managing the resulting computerized product definition and process data base.

  14. Hydrogen Production via Synthetic Gas by Biomass/Oil Partial Oxidation

    Czech Academy of Sciences Publication Activity Database

    Hanika, Jiří; Lederer, J.; Tukač, V.; Veselý, Václav; Kováč, D.

    176-177, - (2011), s. 286-290 ISSN 1385-8947. [International Conference on Chemical Reactors CHEMREACTOR-19 /19./. Vienna, 05.09.2010-09.09.2010] R&D Projects: GA MPO 2A-2TP1/024 Institutional research plan: CEZ:AV0Z40720504 Keywords : hydrogen * biomass * partial oxidation Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 3.461, year: 2011

  15. Fuel processor integrated H{sub 2}S catalytic partial oxidation technology for sulfur removal in fuel cell power plants

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, T.H.; Berry, D.A.; Lyons, K.D.; Beer, S.K.; Freed, A.D. [U.S. Department of Energy, Morgantown, WV (USA). National Energy Technology Laboratory

    2002-12-01

    H{sub 2}S catalytic partial oxidation technology with an activated carbon catalyst was found to be a promising method for the removal of hydrogen sulfide from fuel cell hydrocarbon feedstocks. Three different fuel cell feedstocks were considered for analysis: sour natural gas, sour effluent from a liquid middle distillate fuel processor and a Texaco O{sub 2}-blown coal-derived synthesis gas. The H{sub 2}S catalytic partial oxidation reaction, its integratability into fuel cell power plants with different hydrocarbon feedstocks and its salient features are discussed. Experimental results indicate that H{sub 2}S concentration can be removed down to the part-per-million level in these plants. Additionally, a power law rate expression was developed and reaction kinetics compared to prior literature. The activation energy for this reaction was determined to be 34.4 kJ/g mol with the reaction being first order in H{sub 2}S and 0.3 order in O{sub 2}. 18 refs., 14 figs., 3 tabs.

  16. Partial processing

    International Nuclear Information System (INIS)

    1978-11-01

    This discussion paper considers the possibility of applying to the recycle of plutonium in thermal reactors a particular method of partial processing based on the PUREX process but named CIVEX to emphasise the differences. The CIVEX process is based primarily on the retention of short-lived fission products. The paper suggests: (1) the recycle of fission products with uranium and plutonium in thermal reactor fuel would be technically feasible; (2) it would, however, take ten years or more to develop the CIVEX process to the point where it could be launched on a commercial scale; (3) since the majority of spent fuel to be reprocessed this century will have been in storage for ten years or more, the recycling of short-lived fission products with the U-Pu would not provide an effective means of making refabrication fuel ''inaccessible'' because the radioactivity associated with the fission products would have decayed. There would therefore be no advantage in partial processing

  17. Evaluation of the efficiency of alternative enzyme production technologies

    DEFF Research Database (Denmark)

    Albæk, Mads Orla

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact...... production of cellulases and hemi-cellulases. The aim of the thesiswas to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process...... of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were...

  18. Wood for energy production. Technology - environment - economy[Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Serup, H.; Falster, H.; Gamborg, C. [and others

    1999-07-01

    'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

  19. Sustainable recycling of automotive products in China: Technology and regulation

    Science.gov (United States)

    Chen, Ming

    2006-08-01

    The Chinese economy is growing rapidly, but accompanyingsuch growth are issues of environmental protection and social inequity which must be addressed. With the Automobile Industry Development Policy and the Motor Vehicle Product Recovery Technology Policy, an automobile products recoverability target has been established and will be incorporated into an automobile products authentication management system in China. By 2010, for all end-of-life automobile products, reuse and recovery shall be increased to a minimum of 85% by average weight per vehicle, and the use of lead, mercury, cadmium, and hexavalent chromium is prohibited. This paper will address the sustainable recycling of Chinese automobile products within the period of 2006 2010.

  20. Local power production at the end consumer - appropriate technologies

    International Nuclear Information System (INIS)

    Grinden, Bjoern; Morch, Andrei Z.; Braanaas, Marit; Stang, Jacob; Berner, Monica

    2002-11-01

    The report describes and evaluates a selection of technologies which may be adequate for a local power production at the end consumer. Contrary to may other technology surveys it is focused on small-scale production units that also may be of interest to small consumers. For the various technologies the particular technology is described and an evaluation of the suitability to Norwegian conditions is carried out. For each technology the following is described: 1) The technology in general. 2) Construction and technology trends. 3) Environmental conditions, operation and maintenance. 4) Experiences. 5) Key facts/data. It has to be emphasised that all the technologies are in development and this report describes them as they are in 2002 except for general conditions which always will exist. It has not been possible to obtain exact facts regarding the investment costs and the costs for each produced kWh e lectricity or kWh h eat for many of the technologies because they are new and mass production has not yet started. In an appendix a form is presented for use in obtaining information from equipment suppliers. Later in the project there will be developed a model for calculating the profitability of such investments as well. Technologies such as small-scale wind and hydropower units are the technologies most suited for Norway in a short perspective. In the years to come it is probable that technologies which use biologic fuel/waste of some kind would be used to some extent. In a longer perspective technologies as the Stirling engine and fuel cells may be of interest. The micro gas turbines and combustion engines may be current technologies if the distribution network for natural gas is developed. For these technologies the utilisation of waste heat would approximately double the efficiency and halve the operation costs. Various external conditions will play a major part in the spreading of the local power production. The political, legal and economical external

  1. Radiation technology for enhancing agriculture productivity

    International Nuclear Information System (INIS)

    D'Souza, S.F.

    2016-01-01

    Radiations and radioisotopes are used in agricultural research to develop improved crop varieties, to manage insect pests, monitor fate of pesticides, to study fertilizer and plant micronutrient uptake and to preserve agricultural produce. This is one of the important fields of peaceful applications of atomic energy for societal benefit. Department of Atomic Energy (DAE) has contributed significantly in this area especially in the development of new mutant crop varieties which are benefitting the farmers in enhancing their productivity. With an effective blend of induced mutagenesis and recombination breeding, 42 new crop varieties developed at Bhabha Atomic Research Centre (BARC) have been released and Gazette notified by the Ministry of Agriculture, Government of India for commercial cultivation. These include 21 in oilseeds (15-groundnut, 3 mustard , 2 soybean, 1 sunflower), 19 in pulses (8-mungbean, 5-urdbean, 5-pigeonpea, 1-cowpea) and one each in rice and jute. Some of the desirable traits which have been bred through induced mutations in these crops include higher yields, improved quality traits, early maturity and resistance to biotic and abiotic stress. Several of these varieties have high patronage from the farming community and are grown extensively across the country. Groundnut varieties have given record yields in farmer's fields. Pulses such as mung, urid and tur are popular among farmers in view of their disease resistance and suitability to rice fallow situations. Many of the breeding programmes in national/state systems have been utilizing BARC varieties as parental materials/donors and have developed several other improved varieties using them. (author)

  2. Thal and technologies for fodder production

    International Nuclear Information System (INIS)

    Ali, Z.; Ahmad, M.; Haqqanni, A.M.

    2005-01-01

    The climate of the study area is arid and semi-arid subtropical, characterized by high summer- temperature (1200 F) with hot dry winds, frequent dust-storms and torrential and erratic rains. Winter is mild, with cold nights having temperature 320 F. The fodder tree species in arid and semi-arid regions are a valuable resource of feeding livestock in these regions during the lean periods of both winter and summer seasons. Fodder trees are properly looked after, not only for their usefulness for fuel and furniture, etc., but good environment would improve the quality of life, along with manifold higher fodder- production for animals. Fodder trees should be lopped only when they are about two to three meters in height and branches more than 7.5 cm thick should not be lopped. Lopping of the whole tree, as usually practiced, is injurious to trees and affects their vigor. Lopping cycle should be such that we get new leaves at the desired time of the year. It is recommended that; (i) proven grass-species, like Cenchrus ciliaris, Lasiurus sindicus, Pennisetum orientale and Panicum antidotale, be introduced in Thai, (ii) the improved varieties of some fodder-crops like oats, berseem, lucerne, sorghum sudan grass hybrid and mott grass being multicut (would cover the scarcity periods) can be introduced in the irrigated areas and (iii) the trees and shrub-species, such as Acacia tortilis, Zizyphus nummularia, Acacia anura, Prosopis cineraria, Acacia nilotica, Tacomella undulate, Zizyphus mauritiana, Calligonum polygonoides, Tamarax aphylla and Albizia lebbeck, can be propagated and promoted in Thai desert. (author)

  3. Technology diffusion of energy-related products in residential markets

    Energy Technology Data Exchange (ETDEWEB)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  4. Innovative technologies of waste recycling with production of high performance products

    International Nuclear Information System (INIS)

    Gilmanshin, R; Azimov, Yu I; Gilmanshina, S I; Ferenets, A V; Galeeva, A I

    2015-01-01

    The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented. (paper)

  5. Innovative technologies of waste recycling with production of high performance products

    Science.gov (United States)

    Gilmanshin, R.; Ferenets, A. V.; Azimov, Yu I.; Galeeva, A. I.; Gilmanshina, S. I.

    2015-06-01

    The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented.

  6. Advanced Manufacturing Technologies and Strategically Flexible Production. A Review and Outlook

    DEFF Research Database (Denmark)

    Boer, Harry

    2016-01-01

    ) led to only partial results, and were often abandoned or scaled down. At the same time, a number of soft organizational and managerial approaches and improvement programs, mostly derived from Japan, began to spread in response to the dramatic changes in the competitive environment that seemed...... to require new rationales to organize and manage production systems. However, the compatibility and coherence between changing organizational paradigms and CIM approaches were not extensively explored nor understood. This paper aims to investigate the interactions between the implementation and integration...... of Advanced Manufacturing Technologies (AMT) and the adoption of new managerial and organizational principles....

  7. Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

    Science.gov (United States)

    Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

    2011-01-01

    The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  8. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  9. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-04-30

    This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  10. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-01

    This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  11. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-08

    This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  12. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-09-01

    This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  13. University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

    Energy Technology Data Exchange (ETDEWEB)

    Pendse, Hemant P.

    2010-11-23

    This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

  14. Additive manufacturing of metals the technology, materials, design and production

    CERN Document Server

    Yang, Li; Baughman, Brian; Godfrey, Donald; Medina, Francisco; Menon, Mamballykalathil; Wiener, Soeren

    2017-01-01

    This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leadin...

  15. Impact of carbon monoxide partial pressures on methanogenesis and medium chain fatty acids production during ethanol fermentation.

    Science.gov (United States)

    Esquivel-Elizondo, Sofia; Miceli, Joseph; Torres, Cesar I; Krajmalnik-Brown, Rosa

    2018-02-01

    Medium-chain fatty acids (MCFA) are important biofuel precursors. Carbon monoxide (CO) is a sustainable electron and carbon donor for fatty acid elongation, since it is metabolized to MCFA precursors, it is toxic to most methanogens, and it is a waste product generated in the gasification of waste biomass. The main objective of this work was to determine if the inhibition of methanogenesis through the continuous addition of CO would lead to increased acetate or MCFA production during fermentation of ethanol. The effects of CO partial pressures (P CO ; 0.08-0.3 atm) on methanogenesis, fatty acids production, and the associated microbial communities were studied in batch cultures fed with CO and ethanol. Methanogenesis was partially inhibited at P CO  ≥ 0.11 atm. This inhibition led to increased acetate production during the first phase of fermentation (0-19 days). However, a second addition of ethanol (day 19) triggered MCFA production only at P CO  ≥ 0.11 atm, which probably occurred through the elongation of acetate with CO-derived ethanol and H 2 :CO 2 . Accordingly, during the second phase of fermentation (days 20-36), the distribution of electrons to acetate decreased at higher P CO , while electrons channeled to MCFA increased. Most probably, Acetobacterium, Clostridium, Pleomorphomonas, Oscillospira, and Blautia metabolized CO to H 2 :CO 2 , ethanol and/or fatty acids, while Peptostreptococcaceae, Lachnospiraceae, and other Clostridiales utilized these metabolites, along with the provided ethanol, for MCFA production. These results are important for biotechnological systems where fatty acids production are preferred over methanogenesis, such as in chain elongation systems and microbial fuel cells. © 2017 Wiley Periodicals, Inc.

  16. Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology.

    Science.gov (United States)

    Arafa, Khalid A O

    2018-01-01

    To assess the level of evidence that supports the quality of fit for removable partial denture (RPD) fabricated by computer-aided designing/computer aided manufacturing (CAD/CAM) and rapid prototyping (RP) technology. Methods: An electronic search was performed in Google Scholar, PubMed, and Cochrane library search engines, using Boolean operators. All articles published in English and published in the period from 1950 until April 2017 were eligible to be included in this review. The total number of articles contained the search terms in any part of the article (including titles, abstracts, or article texts) were screened, which resulted in 214 articles. After exclusion of irrelevant and duplicated articles, 12 papers were included in this systematic review.  Results: All the included studies were case reports, except one study, which was a case series that recruited 10 study participants. The visual and tactile examination in the cast or clinically in the patient's mouth was the most-used method for assessment of the fit of RPDs. From all included studies, only one has assessed the internal fit between RPDs and oral tissues using silicone registration material. The vast majority of included studies found that the fit of RPDs ranged from satisfactory to excellent fit. Conclusion: Despite the lack of clinical trials that provide strong evidence, the available evidence supported the claim of good fit of RPDs fabricated by new technologies using CAD/CAM.

  17. Application of electron beam curing technology for paper products

    International Nuclear Information System (INIS)

    Takaharu Miura

    1999-01-01

    The electron beam (EB) curing technology has rapidly advanced in recent years. However there were few examples applying this technology to paper products. One reason comes from the high price of EB equipment and the other comes from the difficulty of controlling the irradiation which gives damages to paper. In spite of these problems, the EB cured coating layer shows remarkable features, such as solvent-resistance, water-resistance, heat-resistance and high smoothness using the drum casting technique. Concentrating on application of this technology to paper, we have already developed some products. For example, paper for printings (Super Mirror PN) and for white boards (Super Mirror WB) have been manufactured. In this presentation, we are going to introduce this EB curing technique and the products

  18. Scientific and technological aspects of the radiopasteurization of egg products

    Energy Technology Data Exchange (ETDEWEB)

    Etienne, J C; Biltiau, J; Rombaux, J P

    1973-11-01

    A bibliographic review is presented of the scientific and technological problems in the thermal pasteurization of egg products and the possible advantages of the substitution of radiopasteurization. Current procedures of pasteurization are described. Conditioning of the egg products by congealing or dehydration prior to storage is discussed. A comparative examination is made of the physico-chemical properties of treated egg products and of the organoleptic qualities of the finished product. The present status of radiopasteurization, the problems to be solved, and the economic aspects are discussed. (JSR)

  19. Microbial electrolysis cells as innovative technology for hydrogen production

    International Nuclear Information System (INIS)

    Chorbadzhiyska, Elitsa; Hristov, Georgi; Mitov, Mario; Hubenova, Yolina

    2011-01-01

    Hydrogen production is becoming increasingly important in view of using hydrogen in fuel cells. However, most of the production of hydrogen so far comes from the combustion of fossil fuels and water electrolysis. Microbial Electrolysis Cell (MEC), also known as Bioelectrochemically Assisted Microbial Reactor, is an ecologically clean, renewable and innovative technology for hydrogen production. Microbial electrolysis cells produce hydrogen mainly from waste biomass assisted by various bacteria strains. The principle of MECs and their constructional elements are reviewed and discussed. Keywords: microbial Electrolysis Cells, hydrogen production, waste biomass purification

  20. Technology and economic assessment of lactic acid production and uses

    Energy Technology Data Exchange (ETDEWEB)

    Datta, R.; Tsai, S.P.

    1996-03-01

    Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}50,000 tons/yr) used in a wide range of food-processing and industrial applications. Potentially, it can become a very large-volume, commodity-chemical intermediate produced from carbohydrates for feedstocks of biodegradable polymers, oxygenated chemicals, environmentally friendly ``green`` solvents, and other intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from fermentation broths and its conversion to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. Development and deployment of novel separations technologies, such as electrodialysis with bipolar membranes, extractive and catalytic distillations, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The emerging technologies can use environmentally sound lactic acid processes to produce environmentally useful products, with attractive process economics. These technology advances and recent product and process commercialization strategies are reviewed and assessed.

  1. 78 FR 13016 - Certain Lined Paper Products From India: Notice of Partial Rescission of Countervailing Duty...

    Science.gov (United States)

    2013-02-26

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... an administrative review of the countervailing duty order on certain lined paper products from India...\\ Petitioners are the Association of American School Paper Suppliers. \\4\\ See petitioners' November 27, 2012...

  2. Production and partial characterization of alkaline protease from bacillus subtilis mutant induced by gamma radiation

    International Nuclear Information System (INIS)

    Ibrahim, H.M.M.; Bashandy, A.S.

    2010-01-01

    Fourteen bacterial isolates belonging to B.subtilis were locally isolated from soil and screened for alkaline protease production. Only one strain, the highly potent one, was selected as alkaline protease producer and subjected to further studies to optimize its production. Alkaline protease production was maximum at 35 degree C after 72 h of incubation and at ph 10.0. molasses as a carbon source and combination of peptone and yeast extract as a nitrogen source enhanced greatly alkaline protease production. The mutant strain induced by gamma radiation showed higher alkaline protease production by 1.97 fold as compared with the parent strain. The alkaline protease enzyme was active at 40 degree C and ph 10. It was compatible with many commercial detergents and showed high stability (84 %) of its original activity with Ariel detergent. Moreover, alkaline protease enhanced the washing performance, and retained 95 % of its activity in the formulated dry powder.

  3. Innovative applications of technology for nuclear power plant productivity improvements

    International Nuclear Information System (INIS)

    Naser, J. A.

    2012-01-01

    The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

  4. Integrative Production Technology for High-Wage Countries

    CERN Document Server

    2012-01-01

    Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

  5. Technology Licensing Strategy for Network Product in a Service Industry

    Directory of Open Access Journals (Sweden)

    Xianpei Hong

    2015-01-01

    Full Text Available Technology licensing has gained significant attention in literature and practice as a rapid and effective way to improve firm’s capability of technology innovation. In this paper, we investigate a duopolistic service provider competition market, where service providers develop and sell a kind of network product. In this setting, we analyze the innovating service provider’s four licensing strategies: no licensing, fixed fee licensing, royalty licensing, and two-part tariff licensing. The literature suggests that when the network products can be completely substituted, two-part tariff licensing is the optimal strategy of the innovating service provider. We find that when the network products cannot be completely substituted, two-part tariff licensing is not always optimal. The degree of the product differentiation, the intensity of the network effects, and the R&D cost of the potential licensee play a key role in determining the innovating service provider’s optimal licensing strategies.

  6. Micromachining technology for thermal ink-jet products

    Science.gov (United States)

    Verdonckt-Vandebroek, Sophie

    1997-09-01

    This paper reviews recent trends and evolutions in the low- end color printing market which is currently dominated by thermal inkjet (TIJ) based products. Micro electromechanical systems technology has been an enabler for the unprecedented cost/performance ratio of these printing products. The generic TIJ operating principles are based on an intimate blend of thermodynamics, fluid dynamics and LSI electronics. The key principles and design issues are outlined and the fabrication of TIJ printheads illustrated with an implementation by the Xerox Corporation.

  7. Genetic analysis of partial egg production records in Japanese quail using random regression models.

    Science.gov (United States)

    Abou Khadiga, G; Mahmoud, B Y F; Farahat, G S; Emam, A M; El-Full, E A

    2017-08-01

    The main objectives of this study were to detect the most appropriate random regression model (RRM) to fit the data of monthly egg production in 2 lines (selected and control) of Japanese quail and to test the consistency of different criteria of model choice. Data from 1,200 female Japanese quails for the first 5 months of egg production from 4 consecutive generations of an egg line selected for egg production in the first month (EP1) was analyzed. Eight RRMs with different orders of Legendre polynomials were compared to determine the proper model for analysis. All criteria of model choice suggested that the adequate model included the second-order Legendre polynomials for fixed effects, and the third-order for additive genetic effects and permanent environmental effects. Predictive ability of the best model was the highest among all models (ρ = 0.987). According to the best model fitted to the data, estimates of heritability were relatively low to moderate (0.10 to 0.17) showed a descending pattern from the first to the fifth month of production. A similar pattern was observed for permanent environmental effects with greater estimates in the first (0.36) and second (0.23) months of production than heritability estimates. Genetic correlations between separate production periods were higher (0.18 to 0.93) than their phenotypic counterparts (0.15 to 0.87). The superiority of the selected line over the control was observed through significant (P egg production in earlier ages (first and second months) than later ones. A methodology based on random regression animal models can be recommended for genetic evaluation of egg production in Japanese quail. © 2017 Poultry Science Association Inc.

  8. Health information technology vendor selection strategies and total factor productivity.

    Science.gov (United States)

    Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

    2013-01-01

    The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

  9. DEVELOPMENT OF TECHNOLOGY AND REGULATORY DOCUMENTATION ON PROCESSED BROCCOLI PRODUCT

    Directory of Open Access Journals (Sweden)

    T. I. Kryachko

    2017-01-01

    Full Text Available The aim of the present investigation was development of an efficient technology for obtaining powders from fresh broccoli; determination of the possibility of using domestic production of broccoli as an import-substituting product; development of regulatory documentation for broccoli powders for the food industry. The research was carried out jointly with the representatives of the Federal Scientific cen-ter of vegetable production on an experimental basis in 2016. The domestic Tonus variety of broccoli (Federal Scientific center of vegetable production and the Maraton F1 hybrid (France, differing in appearance, vegetative period, biochemical and physical characteristics were chosen. Technology of broccoli powder production from domestic and imported products was developed using two methods of drying convection and lyophilization. The gentle drying conditions of broccoli freeze drying compared to convective drying technology provided higher content of both vitamin C and polyphenols in the final powder. Comparative studies of organoleptic and physico-chemical properties of powders obtained from domestic and imported broccoli demonstrated close quality parameters, indicating the possibility of effective domestic broccoli utilization and import substitution. For the first time in the Russian Federation, the "Organization Standard" was developed for regulation of the quality parameters of broccoli powders intended for use in the food industry.

  10. Genetic analyses of partial egg production in Japanese quail using multi-trait random regression models.

    Science.gov (United States)

    Karami, K; Zerehdaran, S; Barzanooni, B; Lotfi, E

    2017-12-01

    1. The aim of the present study was to estimate genetic parameters for average egg weight (EW) and egg number (EN) at different ages in Japanese quail using multi-trait random regression (MTRR) models. 2. A total of 8534 records from 900 quail, hatched between 2014 and 2015, were used in the study. Average weekly egg weights and egg numbers were measured from second until sixth week of egg production. 3. Nine random regression models were compared to identify the best order of the Legendre polynomials (LP). The most optimal model was identified by the Bayesian Information Criterion. A model with second order of LP for fixed effects, second order of LP for additive genetic effects and third order of LP for permanent environmental effects (MTRR23) was found to be the best. 4. According to the MTRR23 model, direct heritability for EW increased from 0.26 in the second week to 0.53 in the sixth week of egg production, whereas the ratio of permanent environment to phenotypic variance decreased from 0.48 to 0.1. Direct heritability for EN was low, whereas the ratio of permanent environment to phenotypic variance decreased from 0.57 to 0.15 during the production period. 5. For each trait, estimated genetic correlations among weeks of egg production were high (from 0.85 to 0.98). Genetic correlations between EW and EN were low and negative for the first two weeks, but they were low and positive for the rest of the egg production period. 6. In conclusion, random regression models can be used effectively for analysing egg production traits in Japanese quail. Response to selection for increased egg weight would be higher at older ages because of its higher heritability and such a breeding program would have no negative genetic impact on egg production.

  11. Partial networking. Deactivation of inactive ECUs; Teilnetzbetrieb. Abschaltung inaktiver Steuergeraete

    Energy Technology Data Exchange (ETDEWEB)

    Esch, Stephan [Audi AG, Ingolstadt (Germany); Meyer, Juergen [Audi AG, Ingolstadt (Germany). Projekt Teilnetzbetrieb und WakeUp-Sleep-Konzepte; Linn, Guenter [Audi AG, Ingolstadt (Germany). Bereich Physical Layer Flexray und Hardware-Teilnetzbetrieb

    2012-02-15

    CAN partial networking technology makes it possible to reduce power consumption and ensures energy efficiency during both operating and idle time. Audi is developing and standardizing this technology in collaboration with other OEMs and semiconductor manufacturers. Partial networking technology will become an inherent item in the Volkswagen Group Networking Technology Kit, with series production planned to begin in 2014. The article deals with the development, application and verification of partial network technology at Audi. The standardization process within the OEM overarching bodies Switch, Autosar and ISO is also outlined. (orig.)

  12. Parallel distributed computing in modeling of the nanomaterials production technologies

    NARCIS (Netherlands)

    Krzhizhanovskaya, V.V.; Korkhov, V.V.; Zatevakhin, M.A.; Gorbachev, Y.E.

    2008-01-01

    Simulation of physical and chemical processes occurring in the nanomaterial production technologies is a computationally challenging problem, due to the great number of coupled processes, time and length scales to be taken into account. To solve such complex problems with a good level of detail in a

  13. Low Carbon Technology Options for the Natural Gas Electricity Production

    Science.gov (United States)

    The ultimate goal of this task is to perform environmental and economic analysis of natural gas based power production technologies (different routes) to investigate and evaluate strategies for reducing emissions from the power sector. It is a broad research area. Initially, the...

  14. Peer production & peer support at the Free Technology Academy

    NARCIS (Netherlands)

    Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

    2012-01-01

    Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

  15. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 R&D Projects: GA ČR(CZ) GAP402/10/2310 Institutional support: RVO:67985998 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  16. Development of Technology and Installation for Biohydrogen Production

    Science.gov (United States)

    Pridvizhkin, S. V.; Vyguzova, M. A.; Bazhenov, O. V.

    2017-11-01

    The article discusses the method for hydrogen production and the device this method application. The relevance of the use of renewable fuels and the positive impact of renewable energy on the environment and the economy is also considered. The presented technology relates to a method for hydrogen production from organic materials subject to anaerobic fermentation, such as the components of solid municipal waste, sewage sludge and agricultural enterprises wastes, sewage waste. The aim of the research is to develop an effective eco-friendly technology for hydrogen producing within an industrial project To achieve the goal, the following issues have been addressed in the course of the study: - development of the process schemes for hydrogen producing from organic materials; - development of the technology for hydrogen producing; - optimization of a biogas plant with the aim of hydrogen producing at one of the fermentation stages; - approbation of the research results. The article is recommended for engineers and innovators working on the renewable energy development issues.

  17. Information Technology in Small Medium Enterprise: Logistic and Production Processes

    Directory of Open Access Journals (Sweden)

    Maurizio Pighin

    2017-01-01

    Full Text Available This paper presents and discuss a survey which describes how small-medium enterprises (SMEs implement and use their information system with respect to their logistic and production processes. The study first describes the rationale of the research, then it identifies the characteristics of the companies and detects their general attitude towards information technology (IT. In the following section the paper presents a set of detailed processes to verify the structure and workflow of companies and how IT supports their processes. In the last part we study the influence of some company characteristics to effective use of processes and to different technological approaches, to support defined logistic and production processes. The novelty of the study and its interest, both in academic and institutional context as in the real world, resides in the opportunity to verify and understand the different attitudes of SMEs towards information technology in defining, organizing, planning and control their processes.

  18. Integrating medical, assistive, and universally designed products and technologies: assistive technology device classification (ATDC).

    Science.gov (United States)

    Bauer, Stephen; Elsaesser, Linda-Jeanne

    2012-09-01

    ISO26000:2010 International Guidance Standard on Organizational Social Responsibility requires that effective organizational performance recognize social responsibility, including the rights of persons with disabilities (PWD), engage stakeholders and contribute to sustainable development. Millennium Development Goals 2010 notes that the most vulnerable people require special attention, while the World Report on Disability 2011 identifies improved data collection and removal of barriers to rehabilitation as the means to empower PWD. The Assistive Technology Device Classification (ATDC), Assistive Technology Service Method (ATSM) and Matching Person and Technology models provide an evidence-based, standardized, internationally comparable framework to improve data collection and rehabilitation interventions. The ATDC and ATSM encompass and support universal design (UD) principles, and use the language and concepts of the International Classification of Functioning, Disability and Health (ICF). Use ATDC and ICF concepts to differentiate medical, assistive and UD products and technology; relate technology "types" to markets and costs; and support provision of UD products and technologies as sustainable and socially responsible behavior. Supply-side and demand-side incentives are suggested to foster private sector development and commercialization of UD products and technologies. Health and health-related professionals should be knowledgeable of UD principles and interventions.

  19. New Products and Technologies, Based on Calculations Developed Areas

    Directory of Open Access Journals (Sweden)

    Gheorghe Vertan

    2013-09-01

    Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

  20. Production and partial characterization of alkaline feruloyl esterases by Fusarium oxysporum during submerged batch cultivation

    DEFF Research Database (Denmark)

    Topakas, E.; Christakopoulos, Paul

    2004-01-01

    Production of feruloyl esterases (FAEs) by Fusarium oxysporum was enhanced by optimization of initial pH of the culture medium, the type and concentration of nitrogen and carbon source. Submerged batch cultivation in a laboratory bioreactor (17 1) produced activity at 82 nkat g(-1) dry substrate....... Production of FAE does not therefore, require FA, however, production is diminished by the removal of esterified FA from the growth substrate. Optimal FAE activity was observed at pH 7 and 50 degreesC with 68 and 55% activity at pH 8 and pH 9, respectively. The esterase was fully stable at pH 5-8 and up...

  1. Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

    Directory of Open Access Journals (Sweden)

    Akhmad Sodiq

    2009-09-01

    Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

  2. Overproduction and partial purification of the Norrie disease gene product, norrin, from a recombinant baculovirus.

    Science.gov (United States)

    Shastry, Barkur S; Trese, Michael T

    2003-12-05

    Abnormal vascularization of the peripheral retina and retinal detachment are common clinical characteristics of Norrie disease (ND), familial exudative vitreoretinopathy, Coats' disease, and retinopathy of prematurity. Although little is known about the molecular basis of these diseases, studies have shown that all of these diseases are associated with mutations in the ND gene. In spite of this, little is known about norrin, its molecular mechanism of action, and its functional relationship with the development of abnormal retinal vasculature. To obtain a large quantity of norrin for structural and functional studies, we have overproduced it in insect cells. For this purpose, a cDNA fragment (869 bp) was isolated from a human retinal cDNA library by amplification and was cloned into an expression vector. The purified plasmid was co-transfected with wild-type linearized Bac-N-Blue DNA into S. frugiperda Sf21 insect cells. The recombinant virus plaques were purified and clones were selected based on the level of recombinant protein expressed in Sf21 cells infected with a purified recombinant virus. From these, a high-titer stock was generated and subsequently used to prepare a fused protein on a large scale. The protein was partially purified by the process of immobilized metal affinity chromatography and the use of ion exchange chromatography

  3. Production, characterization, and immobilization of partially purified surfactant-detergent and alkali-thermostable protease from newly isolated Aeromonas caviae.

    Science.gov (United States)

    Datta, Sumitra; Menon, Gopalakrishnan; Varughese, Bincy

    2017-04-21

    Proteolytic Aeromonas caviae P-1-1 growing at wide-ranging pH (7.0-11.0) and moderate salinity (0-5% NaCl) was isolated from cattle shed of Thanjavur, India. It produced lipase, gelatinase, and polyhydroxybutyrate. Different culture conditions, incubation time, carbon and nitrogen sources, vitamins, amino acids, surfactants, and metal ions for optimal growth and protease production of P-1-1 were examined. Maximum protease (0.128 U/mL) production was achieved with 1% fructose, 1% yeast extract, 0.1% ammonium sulfate, 3% NaCl, 0.1% CaCl 2  · 2H 2 O, 1% glycine, 0.1% vitamin E, and 0.1% Tween-40 at pH 8.0 after 42 hr of incubation at 37°C. It was active over broad range of pH (7.0-12.0), temperature (15-100°C), and salinity (0-9% NaCl) with optima at pH 10.0, 55°C, and 3% NaCl. It retained 65 and 48% activities at pH 12.0 and 100°C, respectively. Partially purified protease was highly stable (100%) within pH range 7.0-12.0 and salinities of 0-5% NaCl for 48 hr. Cu 2+ , Mn 2+ , Co 2+ , and Ca 2+ did not inhibit its activity. Its stability at extreme pHs, temperatures, and in the presence of surfactants and commercial detergents suggests its possible application in laundry detergents. Partially purified protease was immobilized and reused. This is the first report of alkali-thermotolerant, surfactant-detergent-stable partially purified extracellular protease from A. caviae.

  4. Augmented Reality as a Technology Bringing Interactivity to Print Products

    DEFF Research Database (Denmark)

    Seisto, Anu; Aikala, Maiju; Vatrapu, Ravi

    2012-01-01

    Augmented Reality (AR) is the technique of superimposing virtual objects in the user's view of the real world, providing a novel visualization technology for a wide range of applications. Hence, it is a user interface technology that combines the perception of real environments with digital...... owner, Sinebrychoff) and technology experts (Undo and VTT). The whole process was carried out in close contact with the readers and their viewpoints were taken into account in several parts of the design process. Based on the results, more than the easiness of the application, the readers...... of the magazine studied valued the inspiration and connectedness that the use of the application offered. The overall rating of the application was positive and encouraging for the future use of the technology. It may also be concluded that the use of AR applications in conjunction with print products makes...

  5. Development of interface technology for nuclear hydrogen production system

    International Nuclear Information System (INIS)

    Lee, Ki Young; Park, J. K.; Chang, J. H.

    2012-06-01

    These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production economy. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

  6. Effects of dissolved oxygen and pH on nitrous oxide production rates in autotrophic partial nitrification granules.

    Science.gov (United States)

    Rathnayake, Rathnayake M L D; Oshiki, Mamoru; Ishii, Satoshi; Segawa, Takahiro; Satoh, Hisashi; Okabe, Satoshi

    2015-12-01

    The effects of dissolved oxygen (DO) and pH on nitrous oxide (N2O) production rates and pathways in autotrophic partial nitrification (PN) granules were investigated at the granular level. N2O was primarily produced by betaproteobacterial ammonia-oxidizing bacteria, mainly Nitrosomonas europaea, in the oxic surface layer (production increased with increasing bulk DO concentration owing to activation of the ammonia (i.e., hydroxylamine) oxidation in this layer. The highest N2O emissions were observed at pH 7.5, although the ammonia oxidation rate was unchanged between pH 6.5 and 8.5. Overall, the results of this study suggest that in situ analyses of PN granules are essential to gaining insight into N2O emission mechanisms in a granule. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Competition between biomass and food production in the presence of energy policies: a partial equilibrium analysis

    NARCIS (Netherlands)

    Ignaciuk, A.; Vöhringer, F.; Ruijs, A.J.W.; Ierland, van E.C.

    2006-01-01

    Bioenergy has several advantages over fossil fuels. For example, it delivers energy at low net CO2 emission levels and contributes to sustaining future energy supplies. The concern, however, is that an increase in biomass plantations will reduce the land available for agricultural production. The

  8. Production and partial characterisation of feruloyl esterase by Sporotrichum thermophile in solid-state fermentation

    DEFF Research Database (Denmark)

    Topakas, E.; Kalogeris, E.; Kekos, D.

    2003-01-01

    A number of factors affecting production of feruloyl esterase an enzyme that hydrolyse ester linkages of ferulic acid (FA) in plant cell walls, by the thermophylic fungus Sporotrichum thermophile under solid state fermentation (SSF) were investigated. Initial moisture content and type of carbon...

  9. Co-culture of microalgae, cyanobacteria, and macromycetes for exopolysaccharides production: process preliminary optimization and partial characterization.

    Science.gov (United States)

    Angelis, S; Novak, A C; Sydney, E B; Soccol, V T; Carvalho, J C; Pandey, A; Noseda, M D; Tholozan, J L; Lorquin, J; Soccol, C R

    2012-07-01

    In this study, the biomass and exopolysaccharides (EPS) production in co-cultures of microalgae/cyanobacteria and macromycetes was evaluated as a technology for producing new polysaccharides for medical and/or industrial application. Based on biomass and EPS productivity of monocultures, two algae and two fungi were selected and cultured in different co-culture arrangements. The hydrosoluble EPS fractions from mono- and co-cultures were characterized by ¹³C NMR spectroscopy and gas chromatography coupled to mass spectrometry and compared. It was found that co-cultures resulted in the production of an EPS different from those produced by monocultures, showing fungal predominance with microalgal/cyanobacterial traces. Co-cultures conditions were screened (temperature, agitation speed, fungal and microalgae inoculation rate, initial pH, illumination rate, and glucose concentration) in order to achieve maximum biomass and EPS production, resulting in an increase of 33 and 61% in exopolysaccharides and biomass productions, respectively (patent pending).

  10. The effect of partial replacement of corn silage on rumen degradability, milk production and composition in lactating primiparous dairy cows

    Directory of Open Access Journals (Sweden)

    Hakan Biricik

    2010-01-01

    Full Text Available The objective of this experiment was to evaluate the effects of partial replacement of corn silage with long alfalfa hay and/or coarse chopped wheat straw on neutral detergent fibre (NDF rumen degradability, milk yield and composition in late lactating dairy cows fed diets with 50% forage on dry matter basis. Twelve late lactating Holstein primiparous cows including four cows equipped with a rumen cannula, averaging 210 ± 20 d in milk and weighing 575 ± 50 kg were randomly assigned in a 4x4 Latin square design. During each of four 21-d periods, cows were fed 4 total mixed diets that were varied in the forage sources: 1 50% corn silage (CS, 2 35% corn silage + 15% wheat straw (CSW, 3 35% corn silage + 15% alfalfa hay (CSA, 4 25% corn silage + 10% wheat straw + 15% alfalfa hay (CSWA. The production of milk averaged 18.55, 20.41 and 20.06 kg/d for unadjusted milk production, 4% fat corrected milk and solid corrected milk, respectively, and was not affected by treatments. Likewise, milk composition or production of milk components was not affected by diets and averaged 4.69% fat, 3.66% protein, 4.51% lactose, 866 g/d fat, 665 g/d protein, 824 g/d lactose. Treatments had no effect on in situ NDF soluble, degradable and potential degradability of all diets, whereas the effective degradability (ED of NDF was greater for cows fed CS diet than for cows fed CSW, CSA and CSWA diets (P<0.05. These values suggested that the partial replacement of corn silage with alfalfa hay and/or wheat straw has no unfavourable effect on the productive parameters.

  11. Production performance of finisher broiler fed with cocoyam-corm meal as partial energy replacement for maize

    Directory of Open Access Journals (Sweden)

    Christian Paul P. de la Cruz

    2016-10-01

    Full Text Available Aim: The objective of this study was to evaluate the potential of Gabing San Fernando (Xanthosoma spp. corms as partial carbohydrate replacement for maize in finisher broiler production. Materials and Methods: The completely randomized design was utilized to investigate the effects of three finisher poultry diets prepared in varying amounts of cocoyam-corm meal set at 0% (control, 25%, and 50% (experimental replacement levels. Results: There were no significant differences (p≥0.05 as to mortality and body weight measurements between control and experimental groups. Similarly, the mean weights of selected internal organs and condemnable carcasses among treatment groups did not show any significant differences (p≥0.05. In terms of the average feed intakes, birds from 50%-cocoyam group had the highest mean value and were found to be statistically different (p≥0.01 from both control and 25%-cocoyam groups. However, feed conversion ratio did not significantly differ (p≥0.05 among three groups. Higher feed costs were associated with the 50%-cocoyam treatment diet, which was only consistent with higher feed inputs. Thus, the group fed with 50%-cocoyam meal had significantly higher total mean production costs (p<0.005 per bird, when other expenses were taken into account. The production costs for the group given 25%-cocoyam meal did not significantly differ (p≥0.05 from the control group. Conclusion: Partial replacement of maize with cocoyam-corm meal at 25% level was acceptable since inclusion at this level did not adversely affect the production performance of finisher broilers in terms of growth rate, mortality rate, and feeding efficiency. The use of cocoyam meal as nonconventional and alternative carbohydrate source in poultry diet presents positive economic implications, especially to smallhold farmers from the developing countries, like the Philippines.

  12. Wood chip production technology and costs for fuel in Namibia

    Energy Technology Data Exchange (ETDEWEB)

    Leinonen, A.

    2007-12-15

    This work has been done in the project where the main target is to evaluate the technology and economy to use bush biomass for power production in Namibia. The project has been financed by the Ministry for Foreign Affairs of Finland and the Ministry of Agriculture, Water and Forestry of the Republic of Namibia. The target of this study is to calculate the production costs of bush chips at the power plant using the current production technology and to look possibilities to develop production technology in order to mechanize production technology and to decrease the production costs. The wood production costs are used in feasibility studies, in which the technology and economy of utilization of wood chips for power generation in 5, 10 and 20 MW electric power plants and for power generation in Van Eck coal fired power plant in Windhoek are evaluated. Field tests were made at Cheetah Conservation Farm (CCF) in Otjiwarongo region. CCF is producing wood chips for briquette factory in Otjiwarongo. In the field tests it has been gathered information about this CCF semi-mechanized wood chip production technology. Also new machines for bush biomass chip production have been tested. A new mechanized production chain has been designed on the basis of this information. The production costs for the CCF semi-mechanized and the new production chain have been calculated. The target in the moisture content to produce wood chips for energy is 20 w-%. In the semi-mechanized wood chip production chain the work is done partly manually, and the supply chain is organized into crews of 4.8 men. The production chain consists of manual felling and compiling, drying, chipping with mobile chipper and manual feeding and road transport by a tractor with two trailers. The CCF production chain works well. The chipping and road transport productivity in the semimechanized production chain is low. New production machines, such as chainsaw, brush cutter, lawn mover type cutter, rotator saw in skid

  13. Learning about materials science and technology by deconstructing modern products

    DEFF Research Database (Denmark)

    Horsewell, Andy

    Get the attention of young engineering students, interest and inspire them. Encourage them to think about materials science and technology by looking at the consumer products and gadgets that interest them. Analyse what modern products are constructed of, and how and why the materials...... teaching encourages and demands constant modernisation of the course and the materials being presented. A consideration of material and process selection for components in a modern product can be a dynamic starting point for a course on materials science and engineering; providing inspiration and showing...... and the processes have been chosen in their manufacture i.e. deconstruct modern products. Suitable items can easily be found in personal communication and entertainment, including all manner of sports goods. Further, the current pace of materials product development ensures that using these objects to focus...

  14. Nitrous oxide production pathways in a partial nitritation-anammox reactor: Isotopic evidence for nitrous oxide production associated anaerobic ammonium oxidation?

    Science.gov (United States)

    Wunderlin, P.; Harris, E. J.; Joss, A.; Emmenegger, L.; Kipf, M.; Mohn, J.; Siegrist, H.

    2014-12-01

    Nitrous oxide (N2O) is a strong greenhouse gas and a major sink for stratospheric ozone. In biological wastewater treatment N2O can be produced via several pathways. This study investigates the dynamics of N2O emissions from a nitritation-anammox reactor, and links its interpretation to the nitrogen and oxygen isotopic signature of the emitted N2O. A 400-litre single-stage nitritation-anammox reactor was operated and continuously fed with digester liquid. The isotopic composition of N2O emissions was monitored online with quantum cascade laser absorption spectroscopy (QCLAS; Aerodyne Research, Inc.; Waechter et al., 2008). Dissolved ammonium and nitrate were monitored online (ISEmax, Endress + Hauser), while nitrite was measured with test strips (Nitrite-test 0-24mgN/l, Merck). Table 1. Summary of experiments conducted to understand N2O emissions Experimental conditions O2[mgO2/L] NO2-[mgN/L] NH4+[mgN/L] N2O/NH4+[%] Normal operation production pathway, which is hypothesized to be mediated by anammox activity (Figure 1). A less likely explanation is that the SP of N2O was increased by partial N2O reduction by heterotrophic denitrification. Various experiments were conducted to further investigate N2O formation pathways in the reactor. Our data reveal that N2O emissions increased when reactor operation was not ideal, for example when dissolved oxygen was too high (Table 1). SP measurements confirmed that these N2O peaks were due to enhanced nitrifier denitrification, generally related to nitrite build-up in the reactor (Figure 1; Table 1). Overall, process control via online N2O monitoring was confirmed to be an ideal method to detect imbalances in reactor operation and regulate aeration, to ensure optimal reactor conditions and minimise N2O emissions. ReferencesWaechter H. et al. (2008) Optics Express, 16: 9239-9244. Wunderlin, P et al. (2013) Environmental Science & Technology 47: 1339-1348.

  15. Produced water: Market and global trends - oil production - water production - choice of technology

    International Nuclear Information System (INIS)

    Robertson, Steve

    2006-01-01

    The presentation discusses various aspects of the world oil production, the energy demand, the future oil supply, the oil prices and the production growth. Some problems with produced water are also discussed as well as aspects of the market for produced water technology (tk)

  16. Designing PV powered LED products - Integration of PV technology in innovative products

    NARCIS (Netherlands)

    Reinders, Angelina H.M.E.; de Boer, Andries; de Winter, Arjan; Haverlag, Marco; Ossenbrink Sinke, W.; Helm, P.

    2009-01-01

    This study covers the design of innovative product concepts based on a combination of PV and LED technology. The products were developed in a project that took place in 2008 and 2009 during a cooperation of the University of Twente with Philips Lighting. It is shown that surprisingly unpredictable -

  17. Production and Partial Purification of Alpha Amylase from Bacillus subtilis (MTCC 121 Using Solid State Fermentation

    Directory of Open Access Journals (Sweden)

    Dibyangana Raul

    2014-01-01

    Full Text Available Amylase is an enzyme that catalyzes the breakdown of starch into sugars and plays a pivotal role in a variety of areas like use as digestives, for the production of ethanol and high fructose corn syrup, detergents, desiring of textiles, modified starches, hydrolysis of oil-field drilling fluids, and paper recycling. In the present work, solid state fermentation (SSF for α-amylase production has been used in lieu of submerged fermentation (SmF due to its simple technique, low capital investment, lower levels of catabolite repression, and better product recovery. Bacillus subtilis has been well known as producer of alpha amylase and was tested using solid state fermentation for 48 hours at 37°C with wheat bran as substrate. Comparison between different fermentation hours demonstrated high yield of alpha amylase after 48 hours. This alpha amylase has optimum pH and temperature at 7.1 and 40°C, respectively. With the goal to purify alpha amylase, 30–70% (NH42SO4 cut concentrated the amylase activity threefold with respect to crude fermented extract. This was verified in quantitative DNS assay method as well as in zymogram gel profile. The exact molecular weight of the amylase is yet to be determined with the aid of other protein purification techniques.

  18. Partial Characterisation of Bacteriocins Produced by Bacillus cereus Isolates from Milk and Milk Products

    Directory of Open Access Journals (Sweden)

    Bojana Bogović Matijašić

    2003-01-01

    Full Text Available Thirty one (19.2 % out of 161 Bacillus cereus isolates from raw milk and milk products were found to produce proteinaceous substances which inhibit the growth of other B. cereus isolates. The detection of antibacterial activity depended on medium and method used. Bactericidal activity was detected in 23 (14 % or 19 (12 % of the tested strains on the triptic soya agar and brain-heart infusion with glucose, respectively, while 11 (7 % of the strains produced bactericidal substances on both media. Nineteen percent of isolates from raw milk and 20 % of isolates from milk products were found to produce bacteriocins. Four B. cereus isolates inhibited the growth of individual test strains belonging to B. licheniformis, B. subtilis, Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, Lactobacillus helveticus and L. casei species. The bacteriocins of four B. cereus isolates were studied in more detail. The production and activity of these substances were detected in stationary- phase of bacterial culture. Two of them were stable after heating at 60 °C, while only one was stable after heating at 75 °C for 15 minutes. All of them were active over a range of pH=3–10. The apparent molecular weights of four bacteriocins detected by SDS-PAGE electrophoresis were in the range of 1 to 8 kDa.

  19. Technological challenges at ITER plasma facing components production in Russia

    Energy Technology Data Exchange (ETDEWEB)

    Mazul, I.V., E-mail: mazuliv@niiefa.spb.su [Efremov Institute, 196641 St. Petersburg (Russian Federation); Belyakov, V.A.; Gervash, A.A.; Giniyatulin, R.N.; Guryeva, T.M.; Kuznetsov, V.E.; Makhankov, A.N.; Okunev, A.A. [Efremov Institute, 196641 St. Petersburg (Russian Federation); Sevryukov, O.N. [MEPhI, 115409 Moscow (Russian Federation)

    2016-11-01

    Highlights: • Technological aspects of ITER PFC manufacturing in Russia are presented. • Range of technologies to be used during manufacturing of ITER PFC at Efremov Institute has been, in general, defined and their complexity, originality and difficulty are described. • Some features and challenges of welding, brazing and various tests are discussed. - Abstract: Major part of ITER plasma facing components will be manufactured in the Russian Federation (RF). Operational conditions and other requirements to these components, as well as the scale of production, are quite unique. These unique features and related technological solutions found in the frame of the project are discussed. Procedure breakdown and results of qualification for the proposed technologies and potential producers are presented, based on mockups production and testing. Design of qualification mockups and prototypes, testing programs and results are described. Basic quantitative and qualitative parameters of manufactured components and methods of quality control are presented. Critical manufacturing issues and prospects for unique production for future fusion needs are discussed.

  20. New Trend on Halva Production: Dietetic Halva and Nougat. Production Technology and Compositions

    Directory of Open Access Journals (Sweden)

    Emil Racolta

    2013-11-01

    Full Text Available In the last years sugar free confectionery market had grown steadily. This types of products are primarily addressed to diabetics and dieters, but the main driving factor of their growth is the increase of the obese population who raised concern about their health. Halva is known as a high caloric product with its nutritional energy higher than 500 kcal/100g, the demand of a sugar free version for this confectionery products group being those a current need. This work aimed to develop new products – dietetic halva and nougat, their production technology and compositions being in detail described. A new trend on halva production was established by developing a dietetic halva and nougat. The problem which is solved by the current work is to assure a proper technology in order to obtain a dietetic halva similar in taste and texture with the conventional one.

  1. FEATURES OF THE LOGISTICS MANAGEMENT OF PRODUCTION OF HIGH TECHNOLOGY PRODUCTS IN TURBULENCE CHANGING GLOBAL ECONOMY

    Directory of Open Access Journals (Sweden)

    Oleg M. Tolmachev

    2015-01-01

    Full Text Available The subject / topic: The level of development of any country is currently determined by the proportion of high technologies in the GDP. Logistics – the basis for efficient management of modern knowledge-intensive production. Given the adverse conditions in the global economy, greatly enhanced the relevance of the study of logistical aspects in the management of high-tech products.Subject of research: The logistics management of production of high technology products in turbulence changing global economy. In this paper we apply scientific methods: the dialectic, comparisons and analogies, analysis and synthesis, deduction and induction, abstract , logical, historical and retrospective. The purpose of this article is to identify the characteristics and problems of logistics management of production of high technology products in the countries of the Customs Union and the Eastern Partnership. Also consider the role of clusters in the formation of innovation infrastructure in the countries of the Customs Union.Results: As part of the presentation was the author of the present article the urgency of application of CALS-technologies as a tool for organization and information support for the creation, production and operation of the product at the enterprises of the national economy.Conclusions / significance: Management of enterprises in the real sector of the economy in modern conditions should be based on synergies methodological principles of market and state regulation, with increased use of methods focused on the long term. By such methods, in particular, should include the methods of logistic management of production of high technology products. The importance of these technologies has increased steadily, and in modern conditions gets a new quality content that refl ects the phased development plan targeted action to ensure that the desired state of the enterprise as a socio-economic system. This in turn points to the need to ensure that new

  2. Current status and challenges for automotive battery production technologies

    Science.gov (United States)

    Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

    2018-04-01

    Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

  3. A wide variety of injection molding technologies is now applicable to small series and mass production

    International Nuclear Information System (INIS)

    Bloß, P.; Jüttner, G.; Jacob, S.; Löser, C.; Michaelis, J.; Krajewsky, P.

    2014-01-01

    Micro plastic parts open new fields for application, e. g., to electronics, sensor technologies, optics, and medical engineering. Before micro parts can go to mass production, there is a strong need of having the possibility for testing different designs and materials including material combinations. Hence, flexible individual technical and technological solutions for processing are necessary. To manufacture high quality micro parts, a micro injection moulding machine named formicaPlast based on a two-step plunger injection technology was developed. Resulting from its design, the residence time and the accuracy problems for managing small shot volumes with reproducible high accuracy are uncompromisingly solved. Due to their simple geometry possessing smooth transitions and non adherent inner surfaces, the plunger units allow to process 'all' thermoplastics from polyolefines to high performance polymers, optical clear polymers, thermally sensitive bioresorbables, highly filled systems (the so-called powder injection molding PIM), and liquid silicon rubber (LSR, here with a special kit). The applied platform strategy in the 1K and 2K version allows integrating automation for assembling, handling and packaging. A perpendicular arrangement allows encapsulation of inserts, also partially, and integration of this machine into process chains. Considering a wide variety of different parts consisting of different materials, the high potential of the technology is demonstrated. Based on challenging industrial parts from electronic applications (2K micro MID and bump mat, where both are highly structured parts), the technological solutions are presented in more detail

  4. Advanced Decontamination Technologies: High Hydrostatic Pressure on Meat Products

    Science.gov (United States)

    Garriga, Margarita; Aymerich, Teresa

    The increasing demand for “natural” foodstuffs, free from chemical additives, and preservatives has triggered novel approaches in food technology developments. In the last decade, practical use of high-pressure processing (HPP) made this emerging non-thermal technology very attractive from a commercial point of view. Despite the fact that the investment is still high, the resulting value-added products, with an extended and safe shelf-life, will fulfil the wishes of consumers who prefer preservative-free minimally processed foods, retaining sensorial characteristics of freshness. Moreover, unlike thermal treatment, pressure treatment is not time/mass dependant, thus reducing the time of processing.

  5. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  6. New technology for the production of magnesium strips and sheets

    Directory of Open Access Journals (Sweden)

    R. Kawalla

    2008-07-01

    Full Text Available A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm. The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.

  7. Technology benefits resulting from accelerator production of tritium

    International Nuclear Information System (INIS)

    1998-01-01

    One of the early and most dramatic uses of nuclear transformations was in development of the nuclear weapons that brought World War II to an end. Despite that difficult introduction, nuclear weapons technology has been used largely as a deterrent to war throughout the latter half of the twentieth century. The Accelerator Production of Tritium (APT) offers a clean, safe, and reliable means of producing the tritium (a heavy form of hydrogen) needed to maintain the nuclear deterrent. Tritium decays away naturally at a rate of about 5.5% per year; therefore, the tritium reservoirs in nuclear weapons must be periodically replenished. In recent years this has been accomplished by recycling tritium from weapons being retired from the stockpile. Although this strategy has served well since the last US tritium production reactor was shut down in 1988, a new tritium production capability will be required within ten years. Some benefits will result from direct utilization of some of the APT proton beam; others could result from advances in the technologies of particle accelerators and high power spallation targets. The APT may save thousands of lives through the production of medical isotopes, and it may contribute to solving the nation's problem in disposing of long-lived nuclear wastes. But the most significant benefit may come from advancing the technology, so that the great potential of accelerator applications can be realized during our lifetimes

  8. Ethanol production by extractive fermentation - Process development and technology transfer

    International Nuclear Information System (INIS)

    Daugulis, A.J.; Axford, D.B.; Mau, T.K.

    1991-01-01

    Extractive Fermentation is an ethanol processing strategy in which the operations of fermentation and product recovery are integrated and undertaken simultaneously in a single step. In this process an inert and biocompatible organic solvent is introduced directly into the fermentation vessel to selectively extract the ethanol product. The ethanol is readily recovered from the solvent at high concentration by means of flash vaporization, and the solvent is recycled in a closed loop back to the fermentor. This process is characterized by a high productivity (since ethanol does not build up to inhibitory levels), continuous operation, significantly reduced water consumption, and lower product recovery costs. The technical advantages of this processing strategy have been extensively demonstrated by means of a continuous, fully integrated and computer-controlled Process Demonstration Unit in the authors' laboratory. Numerous features of this technology have been protected by US patent. A thorough economic comparison of Extractive Fermentation relative to modern ethanol technology (continuous with cell recycle) has been completed for both new plants and retrofitting of existing facilities for a capacity of 100 million liters of ethanol per year. Substantial cost savings are possible with Extractive Fermentation ranging, depending on the process configuration, from 5 cents to 16 cents per liter. Activities are under way to transfer this proprietary technology to the private sector

  9. Application of Modern Technologies for Nuclear Power Plant Productivity Improvements

    International Nuclear Information System (INIS)

    Joseph, A. Naser

    2011-01-01

    The nuclear power industry in several countries is concerned about the ability to maintain current high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, new requirements and commitments, unnecessary workloads and stress levels, and human errors. Current plant operations are labor-intensive due to the vast number of operational and support activities required by the commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the desire by many plants to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New productivity improvement capabilities with measurable economic benefits are needed so that a successful business case can be made for their use. Improved and new instrumentation and control, human-system interface, information and communications technologies used properly can address concerns about cost-effectively maintaining current performance levels and enable shifts to even higher performance levels. This can be accomplished through the use of new technology implementations to improve productivity, reduce costs of systemic inefficiencies and avoid unexpected costs. Many of the same type of productivity improvements for operating plants will be applicable for new plants. As new plants are being built, it is important to include these productivity improvements or at least provide the ability to implement them easily later

  10. Life cycle assessment of products and technologies. LCA Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Koukkari, H.; Nors, M. (eds.)

    2009-12-15

    VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

  11. A review on the process technology for Mo-99 production

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

  12. Production performance of finisher broiler fed with cocoyam-corm meal as partial energy replacement for maize.

    Science.gov (United States)

    de la Cruz, Christian Paul P

    2016-10-01

    The objective of this study was to evaluate the potential of Gabing San Fernando ( Xanthosoma spp.) corms as partial carbohydrate replacement for maize in finisher broiler production. The completely randomized design was utilized to investigate the effects of three finisher poultry diets prepared in varying amounts of cocoyam-corm meal set at 0% (control), 25%, and 50% (experimental) replacement levels. There were no significant differences (p≥0.05) as to mortality and body weight measurements between control and experimental groups. Similarly, the mean weights of selected internal organs and condemnable carcasses among treatment groups did not show any significant differences (p≥0.05). In terms of the average feed intakes, birds from 50%-cocoyam group had the highest mean value and were found to be statistically different (p≥0.01) from both control and 25%-cocoyam groups. However, feed conversion ratio did not significantly differ (p≥0.05) among three groups. Higher feed costs were associated with the 50%-cocoyam treatment diet, which was only consistent with higher feed inputs. Thus, the group fed with 50%-cocoyam meal had significantly higher total mean production costs (pmeal did not significantly differ (p≥0.05) from the control group. Partial replacement of maize with cocoyam-corm meal at 25% level was acceptable since inclusion at this level did not adversely affect the production performance of finisher broilers in terms of growth rate, mortality rate, and feeding efficiency. The use of cocoyam meal as nonconventional and alternative carbohydrate source in poultry diet presents positive economic implications, especially to smallhold farmers from the developing countries, like the Philippines.

  13. Factors Affecting Adoption of Recommended Cauliflower Production Technology in Nepal

    Directory of Open Access Journals (Sweden)

    Pankaj Raj Dhital

    2016-05-01

    Full Text Available Binary logit regression model of econometrics was used to identify the factors affecting adoption of recommended agricultural technology by the commercial farmers of Nepal. A survey was carried out in 2012 in 120 households from Kavre district, Nepal. The objective was to appraise factors affecting adoption of recommended technology of cauliflower, finding out the level of adoption, identifying the constraints of cauliflower cultivation, assessing the perceived level of satisfaction and studying the relationship of certain selected variables on the adoption. Education, Occupation, contact with Personal Localite sources of information, Group membership and Experience were the most influencing factors for adoption of recommended technology. Though, other factors were not strong enough to contribute significantly but indirectly influence the adoption decision of farmers as combined effects. Occupation was found as negatively associated. Landholding size was strongly and positively influencing among the non significant factors. The level of satisfaction and the constraints of cauliflower production were also identified. Transfer of technology will be effective if and only if the client adopts the technology. For an effective transfer of technology, it is better to go for activities for the welfare of the socioeconomic factors of the farmers.

  14. Production and partial characterization of proteases from Mucor hiemalis URM3773

    Directory of Open Access Journals (Sweden)

    Roana Cecília dos Santos Ribeiro

    2015-03-01

    Full Text Available The current study evaluated the proteases production from 11 fungal species belonging to the genera Mucor, Rhizomucor and Absidia. The species were obtained from the Collection of Cultures URM at the Mycology Department-UFPE, Brazil. The best producing species was Mucor hiemalis URM 3773 (1.689 U mL-1. Plackett-Burman design methodology was employed to select the most effective parameter for protease production out of 11 medium components, including: concentration of filtrate soybean, glucose, incubation period, yeast extract, tryptone, pH, aeration, rotation, NH4Cl, MgSO4 and K2HPO4. Filtrated soybean concentration was the significant variable over the response variable, which was the specific protease activity. The crude enzyme extract showed optimal activity in pH 7.5 and at 50ºC. The enzyme was stable within a wide pH range from 5.8 to 8.0, in the phosphate buffer 0.1M and in stable temperature variation of 40-70ºC, for 180 minutes. The ions FeSO4, NaCl, MnCl2, MgCl2 and KCl stimulated the protease activity, whereas ZnCl2 ion inhibited the activity in 2.27%. Iodoacetic acid at 1mM was the proteases inhibitor that presented greater action.The results indicate that the studied enzyme have great potential for industrial application.

  15. Cost Effective Technologies and Renewable Substrates for Biosurfactants’ Production

    Directory of Open Access Journals (Sweden)

    Ibrahim M Banat

    2014-12-01

    Full Text Available Diverse types of microbial surface-active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant / bioemulsifier (BS/BE as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of biosurfactant industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates and fermentation technology in BS/BE production processes and their role in reducing the production cost.

  16. State-of-art of modern technologies for metals production

    Energy Technology Data Exchange (ETDEWEB)

    Holappa, L [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Metallurgy

    1996-12-31

    The future raw materials are becoming lower in metal content and more complex, multimetal concentrates will be utilized. This will give challenges for metallurgists to develop new, efficient and energy saving processes. The main impacts for current and future production technologies come from energy need and environmental issues of the production processes themselves as well as the inevitable energy production for the metal making. Metals production consumes huge amount of energy, roughly 10 pct of the global energy consumption is caused by metallurgists. That is the necessity but it also means energy saving is one of the metallurgical industry have been enormous when looking back to the history. Since the 1960`s the efforts of the industry together with the strict legislation in the industrialized countries have conducted to greatly decreased emissions and improved pollution control. Breakthrough of new processes like copper flash smelting has aided this positive progress

  17. Handicrafts production: documentation and audiovisual dissemination as sociocultural appreciation technology

    Directory of Open Access Journals (Sweden)

    Luciana Alvarenga

    2016-01-01

    Full Text Available The paper presents the results of scientific research, technology and innovation project in the creative economy sector, conducted from January 2014 to January 2015 that aimed to document and disclose the artisans and handicraft production of Vila de Itaúnas, ES, Brasil. The process was developed from initial conversations, followed by planning and conducting participatory workshops for documentation and audiovisual dissemination around the production of handicrafts and its relation to biodiversity and local culture. The initial objective was to promote expression and diffusion spaces of knowledge among and for the local population, also reaching a regional, state and national public. Throughout the process, it was found that the participatory workshops and the collective production of a virtual site for disclosure of practices and products contributed to the development and socio-cultural recognition of artisan and craft in the region.

  18. State-of-art of modern technologies for metals production

    Energy Technology Data Exchange (ETDEWEB)

    Holappa, L. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Metallurgy

    1995-12-31

    The future raw materials are becoming lower in metal content and more complex, multimetal concentrates will be utilized. This will give challenges for metallurgists to develop new, efficient and energy saving processes. The main impacts for current and future production technologies come from energy need and environmental issues of the production processes themselves as well as the inevitable energy production for the metal making. Metals production consumes huge amount of energy, roughly 10 pct of the global energy consumption is caused by metallurgists. That is the necessity but it also means energy saving is one of the metallurgical industry have been enormous when looking back to the history. Since the 1960`s the efforts of the industry together with the strict legislation in the industrialized countries have conducted to greatly decreased emissions and improved pollution control. Breakthrough of new processes like copper flash smelting has aided this positive progress

  19. Technology Epiphany and an Integrated Product and Service

    Directory of Open Access Journals (Sweden)

    Satoru Goto

    2017-07-01

    Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

  20. Trapping technology for gaseous fission products from voloxidation process

    International Nuclear Information System (INIS)

    Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S.

    2005-05-01

    The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, 14 C, Kr, Xe, I and 3 H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and 14 C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for 3 H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system

  1. Trapping technology for gaseous fission products from voloxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S

    2005-05-15

    The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, {sup 14}C, Kr, Xe, I and {sup 3}H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and {sup 14}C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for {sup 3}H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system.

  2. Potential of impulse drying technology for molded pulp products manufacture

    DEFF Research Database (Denmark)

    Didone, Mattia; Tosello, Guido

    2016-01-01

    The vision of the Green Fiber Bottle (GFB) project is to develop a paper bottle for beer, which will be both recyclable and biodegradable. The early prototypes of the bottle are very promising but there are huge technical and scientific challenges ahead to mature the production technology....... The possibility of applying the concept of impulse drying during the drying stage is suggested. This would give benefits in terms of productivity and it would also reduce energy consumption.With the aim of understanding and controlling the impulse drying phenomena, a simplified approach is proposed. Finally......, a potential design for a testing equipment is described....

  3. Elusive prize: enormous coal gas potential awaits production technology breakthrough

    Energy Technology Data Exchange (ETDEWEB)

    Collison, M.

    2002-01-07

    The expanded gas pipeline grid has excess capacity, and gas resources are declining. There is increasing interest in development of Canada's resources of coalbed methane (CBM). The chairman of the Canadian Coalbed Methane Forum estimates that Canada has more than 3,000 trillion ft{sup 3} of gas awaiting suitable technology. PanCanadian and MGV Energy conducted a CBM exploration and pilot study on the Palliser spread in southern Alberta. Results from 23 of 75 wells are encouraging. The study is being accelerated and expanded to include an additional 50 wells elsewhere in Alberta. Some scientists anticipate commercial CBM production within two years. Problems facing developers include the large land holdings necessary for economic CBM production and the disposal of coal formation water. It is anticipated that U.S. technology will be modified and used. The potential for CBM development at Pictou in Nova Scotia and in British Columbia in the foothills is considered. 3 figs.

  4. A User Centered Approach to Developing Emergent Technology Products

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

    2008-01-01

    be used too early in the design process, given that users respond best to issues they know or can relate to. This paper presents a case study where a user-centred approach was used to determine when and how to involve users in the design of a TV-enabled mobile telephone. The aim of the study......Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...... methodological issues related to user involvement in the implementation of emerging technologies in the consumer electronics industry....

  5. Depleted uranium as a by product of nuclear technology

    International Nuclear Information System (INIS)

    Orlic, M.

    2000-01-01

    Depleted uranium (DU) has been used during the War in Yugoslavia in the year 1999 by NATO forces, as well as in Bosnia and Gulf War. In Yugoslavia it has been used in two modalities: as ammunition (mostly caliber 30 mm) and as a part of cruise missiles (counterweight penetrator). Total amount of DU in Yugoslavia was about 10 tons. DU is a by product of nuclear technology and represents low-level nuclear waste. Therefore it should be stored. But, because of military application it is in the environment where it could react chemo toxically or radio toxically and so endanger people and animals. This paper contains all relevant technology parameters of DU created as a by product, DU physical and chemical properties, DU ammunition effects, environmental DU transport, and estimation of consequences on people and environment

  6. Biogas and BioFertilizer Production Using Green Technology

    International Nuclear Information System (INIS)

    Sirirote, Pramote

    2010-01-01

    Basically, it is technology which created and used in a way that conserves natural resources and the environment. This technology also can be environmental friendly because the use of this technology is supposed to reduce the amount of waste and pollution that is created during production and consumption. These food wastes will come from animal bone, crab skeleton, fish skeleton, rice, noodle, vegetable and others. We collect all of these wastes and then keep it in plants, and then we make sure that this waste will turn into biogas via anaerobic digestion. All of these involved hydrolysis, fermentation, aceto genesis and methano genesis process. Methane that produced will be used in biomass plant to generate electricity. Meanwhile bio fertilizer that produced will be applied on agriculture sectors as fertilizer for plants.

  7. Development of semiindustrial technology for electrolytic powder production

    International Nuclear Information System (INIS)

    Suchkov, A.B.; Kovalev, B.F.; Zhbanov, A.M.; Rabinovich, E.M.; Sozina, A.L.

    1978-01-01

    The technology of the production of Fe, Mn, Cr, W pure metal powders by electrolysis of industrial waste in molten chloride-fluoride media with the addition of lower chlorides of refining metal was tested in laboratory and then in industrial electrolysers (2kA). The cathode deposit was subjected to hydrometallurgical treatment. Approximate technological parameters of electrorefining are presented. A high-temperature (700-1000 deg C) hydrogen annealing was applied to increase the quality and to change physicochemical and technological characteristics of electrolytic powders. The data on the chemical composition of Mowders are presented, testifying to their high purity. It is shown that electrolytic powders are not uniform in granulometric composition (from 1 to 100 μm), their particles being characterized mainly by the dendrite structure

  8. Application of Generalized Hukuhara derivative approach in an economic production quantity model with partial trade credit policy under fuzzy environment

    Directory of Open Access Journals (Sweden)

    Pinki Majumder

    2016-01-01

    Full Text Available In this present study, a production inventory model with partial trade credit is formulated and solved in fuzzy environment via Generalized Hukuhara derivative approach. To capture the market, a supplier offers a trade credit period to its retailers. Due to this facility, retailer also offers a partial trade credit period to his/her customer to boost the demand of the item. In practical life situation, demands are generally dependent upon time. Constant demand of an item varies time to time. In this vague situation, demands are taken as time dependent, where its constant part is taken as Left Right - type fuzzy number. In this paper, Generalized Hukuhara derivative approach is used to solve the fuzzy inventory model. Four different cases are considered by using Generalized Hukuhara-(i differentiability and Generalized Hukuhara-(ii differentiability. The objective of this paper is to find out the optimal time so as the total inventory cost is minimum. Finally the model is solved by generalized reduced gradient method. The proposed model and technique are illustrated by numerical examples. Some sensitivity analyses both in tabular and graphical forms are presented and the effects of minimum cost with respect to various inventory parameters are discussed.

  9. Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

    Science.gov (United States)

    Claisse, Jeremy T; Pondella, Daniel J; Love, Milton; Zahn, Laurel A; Williams, Chelsea M; Bull, Ann S

    2015-01-01

    When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

  10. Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

    Directory of Open Access Journals (Sweden)

    Jeremy T Claisse

    Full Text Available When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes. "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

  11. Development of technology for production of reduced fat processed cheese

    Directory of Open Access Journals (Sweden)

    Adriana Torres Silva e Alves

    2015-09-01

    Full Text Available An increasing share of foods with reduced fat has been observed in the diet of the Brazilian population, a trend also seen in many other countries. In this context, our-aim was to study the manufacturing parameters and to develop a process to produce a spreadable processed cheese (requeijão cremoso with reduced fat content. In the first stage of this study, modifications were performed in the traditional manufacturing process of requeijão cremoso with regular fat content to produce a reduced fat product. During the second stage of this study, two reduced fat cheeses, with and withoutthe addition of whey protein concentrate (WPC were developed, both using JOHA S9 and JOHA PZ as emulsifying salts, resulting in four different formulations. The amounts of cream and water used in both products were calculated in order to obtain a final product with 10% fat and 33% total solids. The product which presented the best results was produced with curd obtained by direct acidification of skimmed milk heated at 68-70 ºC, using 1,3% emulsifying salt JOHA S9 in the melting process and 2% WPC 34% as a partial fat substitute, both calculated as a percentage of the amountof curd used as raw material. It was also important to add WPC 34% to the product at the first cooking step of the process (70 ºC, in order to obtain a final product withthe typical spreadable texture of the traditional requeijão cremoso.

  12. Development of Laser Application Technology for Stable Isotope Production

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Do Young; Ko, Kwang Hoon; Kwon, Duck Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2007-04-15

    Tl-203 is used as a source material to produce Tl-201 radioisotope which is produced in a cyclotron by irradiating the enriched Tl-203 target. Tl-201 is a radiopharmaceutical for SPECT (single photon emission computerized tomography) to diagnose heart diseases and tumors. This Project aim to develop laser application technology to product stable isotopes such as Tl-203, Yb-168, and Yb-176. For this, photoion extraction device, atomic beam generator, dye lasers, and high power IR lasers are developed.

  13. INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER

    OpenAIRE

    I. V. Sergienko; A. E. Kutsova; S. V. Kutsov

    2015-01-01

    The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requireme...

  14. Development of Laser Application Technology for Stable Isotope Production

    International Nuclear Information System (INIS)

    Jeong, Do Young; Ko, Kwang Hoon; Kwon, Duck Hee

    2007-04-01

    Tl-203 is used as a source material to produce Tl-201 radioisotope which is produced in a cyclotron by irradiating the enriched Tl-203 target. Tl-201 is a radiopharmaceutical for SPECT (single photon emission computerized tomography) to diagnose heart diseases and tumors. This Project aim to develop laser application technology to product stable isotopes such as Tl-203, Yb-168, and Yb-176. For this, photoion extraction device, atomic beam generator, dye lasers, and high power IR lasers are developed

  15. ETHICAL DILEMMAS AND PRODUCTION OF JOURNALISM: PERCEPTIONS FROM TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Edgard Patrício

    2013-12-01

    Full Text Available The purpose of this study is to develop a reflection on ethics and practice of Journalism based on the production conditions of his professional exercise. It has been prepared in the basis of empirical material collected through the conduct of 15 interviews throughout the year of 2011 with professional journalists of the labour market of Fortaleza. Specifically for this study, I approach the relation between ethics, practice of Journalism and technologies.

  16. Ethical dilemmas and production of journalism: perceptions from technologies

    Directory of Open Access Journals (Sweden)

    Edgard Patrício

    2013-12-01

    Full Text Available The purpose of this study is to develop a reflection on ethics and practice of Journalism based on the production conditions of his professional exercise. It has been prepared in the basis of empirical material collected through the conduct of 15 interviews throughout the year of 2011 with professional journalists of the labour market of Fortaleza. Specifically for this study, I approach the relation between ethics, practice of Journalism and technologies.

  17. Energy Address Delivery Technologies and Thermal Transformations in Food Production

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2016-08-01

    Full Text Available In this article, energetic and technical paradoxes in food nanotechnologies and traditional approaches to evaluation of energy recourses using are considered. Hypotheses of improvement of food production energy technologies are formulated. Classification of principles of address delivery of energy to food raw materials elements is given. We had substantiated the perspective objectives for heat-pumps installations and biphasic heat-transfer systems. The energy efficiency of new technolo-gies is compared on base of the number of energy impact. Principles of mass transfer modeling in ex-traction, dehydration and pasteurization combined processes are considered by food production exam-ple. The objectives of mathematical modeling of combined hydrodynamic and heat and mass transfer processes in modern energy technologies are set. The fuel energy conversion diagrams for drying, in-novative installations on the base of thermal siphons, heat pumps and electromagnetic energy genera-tors are represented. In this article, we illustrate how electromagnetic field, biphasic heat-transfer sys-tems and heat pumps can be effective tools for energy efficiency technologies.

  18. Survival of Salmonella during Production of Partially Sprouted Pumpkin, Sunflower, and Chia Seeds Dried for Direct Consumption.

    Science.gov (United States)

    Keller, Susanne E; Anderson, Nathan M; Wang, Can; Burbick, Stephen J; Hildebrandt, Ian M; Gonsalves, Lauren J; Suehr, Quincy J; Farakos, Sofia M Santillana

    2018-04-01

    Ready-to-eat foods based on dried partially sprouted seeds have been associated with foodborne salmonellosis. Whereas research has focused on the potential for Salmonella initially present in or on seeds to grow and survive during fresh sprout production, little is known about the potential for growth and survival of Salmonella associated with seeds that have been partially sprouted and dried. The goal of this study was to determine the growth of Salmonella during soaking for partial germination of pumpkin, sunflower, and chia seeds and subsequent survival during drying and storage. Pumpkin, sunflower, and chia seeds were inoculated with a four-serotype Salmonella cocktail by the dry transfer method and were soaked in sterile water at 25 or 37°C for 24 h. During the soaking period, Salmonella exhibited growth rates of 0.37 ± 0.26, 0.27 ± 0.12, and 0.45 ± 0.19 log CFU/h at 25°C and 0.94 ± 0.44, 1.04 ± 0.84, and 0.73 ± 0.36 log CFU/h at 37°C for chia, pumpkin, and sunflower seeds, respectively. Soaked seeds were drained and dried at 25, 51, and 60°C. Drying resulted in >5 log CFU/g loss at both 51 and 60°C and ∼3 log CFU/g loss at 25°C on partially sprouted pumpkin and sunflower seeds. There was no decrease in Salmonella during drying of chia seeds at 25°C, and only drying at 60°C provided losses >5 log CFU/g. Dried seeds were stored at 37 and 45°C at 15 and 76% relative humidity (RH) levels. The combination of temperature and RH exerted a stronger effect than either factor alone, such that rates at which Salmonella decreased generally followed this order: 37°C at 15% RH < 45°C at 15% RH < 37°C at 76% RH < 45°C at 76% RH for all seeds tested. Rates differed based on seed type, with chia seeds and chia seed powder having the smallest rate of Salmonella decrease, followed by sunflower and pumpkin seeds. Drying at higher temperatures (50 and 61°C) or storing at elevated temperature and humidity (45°C and 76% RH) resulted in significantly different

  19. Wastewater recycling technology for fermentation in polyunsaturated fatty acid production.

    Science.gov (United States)

    Song, Xiaojin; Ma, Zengxin; Tan, Yanzhen; Zhang, Huidan; Cui, Qiu

    2017-07-01

    To reduce fermentation-associated wastewater discharge and the cost of wastewater treatment, which further reduces the total cost of DHA and ARA production, this study first analyzed the composition of wastewater from Aurantiochytrium (DHA) and Mortierella alpina (ARA) fermentation, after which wastewater recycling technology for these fermentation processes was developed. No negative effects of DHA and ARA production were observed when the two fermentation wastewater methods were cross-recycled. DHA and ARA yields were significantly inhibited when the wastewater from the fermentation process was directly reused. In 5-L fed-batch fermentation experiments, using this cross-recycle technology, the DHA and ARA yields were 30.4 and 5.13gL -1 , respectively, with no significant changes (P>0.05) compared to the control group, and the water consumption was reduced by half compared to the traditional process. Therefore, this technology has great potential in industrial fermentation for polyunsaturated fatty acid production. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Technology and quality of Skorup - traditional Montenegrin dairy product

    Directory of Open Access Journals (Sweden)

    Slavko Mirecki

    2017-01-01

    Full Text Available Skorup is Montenegrin traditional dairy product. Its main characteristics are extremely high content of milk fat and centuries-old technology. Due to the specific technology, high nutritional value and its historical heritage, Skorup deserves to be labelled as product with protected designation of origin (PDO or protected geographical indication (PGI. The purpose of this study was to collect the most important data about Skorup technology and quality and to launch the process of protection. The chemical quality of raw milk was analysed using IR spectrophotometry, the number of somatic cells and total bacteria count by flow cytometry, and Skorup composition by FTIR spectrophotometry. The presence of Escherichia coli, coagulase positive staphylococci and aerobic mesophilic bacteria in Skorup was detected by standard broth base methods. All Skorup samples contained more than 80 % of fat in dry matter, more than 70 % dry matter, approximately 60 % milk fat and 6 % proteins. The sensory characteristics of all samples were excellent, and according to sensory classification, they belong to the highest classes (I and IA. However, five out of twenty samples did not meet requirements for hygienic quality, which implies the urgent need for improvement of hygiene conditions during its production.

  1. Technological aspects of horse meat products - A review.

    Science.gov (United States)

    Lorenzo, José M; Munekata, Paulo E S; Campagnol, Paulo Cezar Bastianello; Zhu, Zhenzhou; Alpas, Hami; Barba, Francisco J; Tomasevic, Igor

    2017-12-01

    Horse meat and its products can be considered as a food with a high nutritional value. However, due to cases of economically motivated food adulteration by the intentional addition of horse meat beef products in recent years, horse meat has become a controversial issue. Consumer confidence in meat products and the meat industry has diminished, although consumers consider the differences between the food content and the label as the major issue rather than the safety and nutritional characteristics of horse meat. The elaboration of meat products from horse meat (e.g. "cecina", dry-cured loin, salami, bressaola and pâté) is also an interesting alternative to other traditional meat products such as dry-cured pork hams, pork sausages and liver pâtés. In this review, the technological aspects, safety and storage stability of meat products elaborated from horse meat will be addressed by highlighting the nutritional and sensory aspects of these meat products. We aim to improve the existing knowledge about horse meat in the view of recent scandals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Amino acids production focusing on fermentation technologies - A review.

    Science.gov (United States)

    D'Este, Martina; Alvarado-Morales, Merlin; Angelidaki, Irini

    Amino acids are attractive and promising biochemicals with market capacity requirements constantly increasing. Their applicability ranges from animal feed additives, flavour enhancers and ingredients in cosmetic to specialty nutrients in pharmaceutical and medical fields. This review gives an overview of the processes applied for amino acids production and points out the main advantages and disadvantages of each. Due to the advances made in the genetic engineering techniques, the biotechnological processes, and in particular the fermentation with the aid of strains such as Corynebacterium glutamicum or Escherichia coli, play a significant role in the industrial production of amino acids. Despite the numerous advantages of the fermentative amino acids production, the process still needs significant improvements leading to increased productivity and reduction of the production costs. Although the production processes of amino acids have been extensively investigated in previous studies, a comprehensive overview of the developments in bioprocess technology has not been reported yet. This review states the importance of the fermentation process for industrial amino acids production, underlining the strengths and the weaknesses of the process. Moreover, the potential of innovative approaches utilizing macro and microalgae or bacteria are presented. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Hydrogen or synthesis gas production via the partial oxidation of methane over supported nickel-cobalt catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Alaric C.W. [Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543 (Singapore); Institute of Chemical and Engineering Sciences, 1 Pesek Road, Jurong Island, Singapore 627833 (Singapore); Chen, Luwei; Lin, Jianyi [Institute of Chemical and Engineering Sciences, 1 Pesek Road, Jurong Island, Singapore 627833 (Singapore); Kee Leong, Weng [Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543 (Singapore); Johnson, Brian F.G.; Khimyak, Tetyana [University Chemical Laboratory, University of Cambridge, Lensfield Road, Cambridge, UK CB2 1EW (United Kingdom)

    2007-05-15

    Activity, selectivity, and coking-resistance of a series of Ni{sub x}Co{sub y} (where x,y are the respective metal loadings of 0, 1, 2 or 3 wt.%; x+y=3) bimetallic catalysts supported on CaAl{sub 2}O{sub 4}/Al{sub 2}O{sub 3} have been studied for hydrogen/synthesis gas production via the catalytic partial oxidation (CPO) of methane. Catalysts were characterized by temperature programmed reduction (TPR), transmission electron microscopy (TEM) and X-ray fluorescence multi-element analysis (XRF). Their activity for the partial oxidation of methane to hydrogen and carbon monoxide (at 1 bar, gas hourly space velocity (GHSV) of 144,000cm{sup 3}g{sup -1}h{sup -1} and CH{sub 4}/O{sub 2} molar ratio of 2) was investigated, and coke deposited on the spent catalysts was studied by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and thermogravimetric analysis (TGA). The activity was found to decrease in the order of Ni{sub 2}Co>Ni{sub 3}>NiCo{sub 2}>>Co{sub 3}, while CO and H{sub 2} selectivities were found to be in the order ofNi{sub 2}Co>Ni{sub 3}{approx}NiCo{sub 2}>Co{sub 3}. Ni{sub 2}Co is also shown to be more resistant to coking as compared to Ni{sub 3}, which is a current catalyst of choice. Results show that not only does Ni{sub 2}Co have the highest activity and selectivity among all the catalysts tested, it is also relatively resistant to coking. This finding would be helpful for catalyst design to achieve high coking resistivity catalysts for hydrogen production from CPO of methane. (author)

  4. Refining in the 1990s: Technological response to environmental concerns, product quality requirements and changes in demand patterns

    Energy Technology Data Exchange (ETDEWEB)

    Naber, J.E.; Stork, W.H.J.; Blauwhoff, P.M.M. (Koninklijke Shell, Amsterdam (Netherlands). Lab.); Groeneveld, K.J.W. (Shell Internationale Petroleum Maatschappij B.V., The Hague (Netherlands))

    1990-01-01

    The refining industry is faced with a pressing need to protect the environment and with increasing demands for higher quality and changes in the composition of the product mix, partly as a result of a continued decline in demand for residual fuel due to energy savings and competition from other energy sources. An important part of the response to these challenges has been the development and implementation of new and improved technology to increase the refiner's ability to upgrade relatively low-value products to high-quality fuels. This generally involves an increase of the hydrogen content of the products, either by rejecting carbon or by adding hydrogen. In consequence, advanced technology has recently been developed for the conversion of residual components in catalytic crackers (carbon rejection) as well as in residue hydroprocessing (hydrogen addition). However, as a result of the increasing amounts of aromatic components in distillates from residue conversion, higher product quality demands in conjunction with a shift to diesel fuel can only be met by significant further developments in hydroprocessing. These developments favour the low hetero-atom and low-aromatics production in modern hydrocrackers utilising advanced catalysts and process technology. In the more distant future, the advent of new technology for large-scale production of synthesis gas (CO/H{sub 2}) from partial oxidation of natural gas, heavy oil or coal will enable the production of superior-quality non-aromatic middle distillates through sophisticated Fischer-Tropsch catalysis. (orig./EF).

  5. Microbial platform technology for recombinant antibody fragment production: A review.

    Science.gov (United States)

    Gupta, Sanjeev Kumar; Shukla, Pratyoosh

    2017-02-01

    Recombinant antibody fragments are being used for the last few years as an important therapeutic protein to cure various critical and life threatening human diseases. Several expression platforms now days employed for the production of these recombinant fragments, out of which bacterial system has emerged a promising host for higher expression. Since, a small antibody fragment unlike full antibody does not require human-like post-translational modification therefore it is potentially expressed in prokaryotic production system. Recently, small antibody fragments such as scFvs (single-chain variable fragments) and Fabs (antibody fragments) which does not require glycosylation are successfully produced in bacteria and have commercially launched for therapeutic use as these fragments shows better tissue penetration and less immunogenic to human body compared to full-size antibody. Recently developed Wacker's ESETEC secretion technology is an efficient technology for the expression and secretion of the antibody fragment (Fab) exceeded up to 4.0 g/L while scFv up to 3.5 g/L into the fermentation broth. The Pfenex system and pOP prokaryotic expression vector are another platform used for the considerably good amount of antibody fragment production successfully. In this review, we summarize the recent progress on various expression platforms and cloning approaches for the production of different forms of antibody fragments in E. coli.

  6. Geographical patterns in climate and agricultural technology drive soybean productivity in Brazil.

    Science.gov (United States)

    Caetano, Jordana Moura; Tessarolo, Geiziane; de Oliveira, Guilherme; Souza, Kelly da Silva E; Diniz-Filho, José Alexandre Felizola; Nabout, João Carlos

    2018-01-01

    The impacts of global climate change have been a worldwide concern for several research areas, including those dealing with resources essential to human well being, such as agriculture, which directly impact economic activities and food security. Here we evaluate the relative effect of climate (as indicated by the Ecological Niche Model-ENM) and agricultural technology on actual soybean productivity in Brazilian municipalities and estimate the future geographic distribution of soybeans using a novel statistical approach allowing the evaluation of partial coefficients in a non-stationary (Geographically Weighted Regression; GWR) model. We found that technology was more important than climate in explaining soybean productivity in Brazil. However, some municipalities are more dependent on environmental suitability (mainly in Southern Brazil). The future environmental suitability for soybean cultivation tends to decrease by up 50% in the central region of Brazil. Meanwhile, southern-most Brazil will have more favourable conditions, with an increase of ca. 25% in environmental suitability. Considering that opening new areas for cultivation can degrade environmental quality, we suggest that, in the face of climate change impacts on soybean cultivation, the Brazilian government and producers must invest in breeding programmes and more general ecosystem-based strategies for adaptation to climate change, including the development of varieties tolerant to climate stress, and strategies to increase productivity and reduce costs (social and environmental).

  7. Green cheese: partial life cycle assessment of greenhouse gas emissions and energy intensity of integrated dairy production and bioenergy systems.

    Science.gov (United States)

    Aguirre-Villegas, H A; Passos-Fonseca, T H; Reinemann, D J; Armentano, L E; Wattiaux, M A; Cabrera, V E; Norman, J M; Larson, R

    2015-03-01

    The objective of this study was to evaluate the effect of integrating dairy and bioenergy systems on land use, net energy intensity (NEI), and greenhouse gas (GHG) emissions. A reference dairy farm system representative of Wisconsin was compared with a system that produces dairy and bioenergy products. This integrated system investigates the effects at the farm level when the cow diet and manure management practices are varied. The diets evaluated were supplemented with varying amounts of dry distillers grains with solubles and soybean meal and were balanced with different types of forages. The manure-management scenarios included manure land application, which is the most common manure disposal method in Wisconsin, and manure anaerobic digestion (AD) to produce biogas. A partial life cycle assessment from cradle to farm gate was conducted, where the system boundaries were expanded to include the production of biofuels in the analysis and the environmental burdens between milk and bioenergy products were partitioned by system expansion. Milk was considered the primary product and the functional unit, with ethanol, biodiesel, and biogas considered co-products. The production of the co-products was scaled according to milk production to meet the dietary requirements of each selected dairy ration. Results indicated that land use was 1.6 m2, NEI was 3.86 MJ, and GHG emissions were 1.02 kg of CO2-equivalents per kilogram of fat- and protein-corrected milk (FPCM) for the reference system. Within the integrated dairy and bioenergy system, diet scenarios that maximize dry distillers grains with solubles and implement AD had the largest reduction of GHG emissions and NEI, but the greatest increase in land use compared with the reference system. Average land use ranged from 1.68 to 2.01 m2/kg of FPCM; NEI ranged from -5.62 to -0.73 MJ/kg of FPCM; and GHG emissions ranged from 0.63 to 0.77 kg of CO2-equivalents/kg of FPCM. The AD contributed 65% of the NEI and 77% of the GHG

  8. Lactose hydrolysis and milk powder production: technological aspects

    Directory of Open Access Journals (Sweden)

    Jansen Kelis Ferreira Torres

    2017-06-01

    Full Text Available The food industry has the challenge and the opportunity to develop new products with reduced or low lactose content in order to meet the needs of a growing mass of people with lactose intolerance. The manufacture of spray dried products with hydrolyzed lactose is extremely challenging. These products are highly hygroscopic, which influence the productivity and conservation of the powders, not to mention the undesirable and inevitable technological problem of constant clogging of drying chambers. The aim of this study was to evaluate the effect of different levels (0%, 25%, 50%, 75% and > 99% of enzymatic lactose hydrolysis on the production and storage of whole milk powder. The samples were processed in a pilot plant and characterized in relation to their composition analysis; to their degree of hydrolysis of lactose; and to their sorption isotherms. The results indicated the hydrolysis of lactose may affect the milk powder production due to a higher extent of powder adhesion within the spray dryer chambers and due to a higher tendency to absorb water during storage.

  9. Technology selection for hydrogen production using nuclear energy

    International Nuclear Information System (INIS)

    Siti Alimah; Erlan Dewita

    2008-01-01

    The NPP can either be used to produce electricity, or as heat source for non-electric applications (cogeneration). High Temperature Reactor (HTR) with high outlet coolant temperature around 900~1000 o C, is a reactor type potential for cogeneration purposes such as hydrogen production and other chemical industry processes that need high heat. Considering the national energy policy that a balanced arrangement of renewable and unrenewable natural resources has to be made to keep environmental conservation for the sake of society prosperity in the future, hydrogen gas production using nuclear heat is an appropriate choice. Hydrogen gas is a new energy which is environmentally friendly that it is a prospecting alternative energy source in the future. Within the study, a comparison of three processes of hydrogen gas production covering electrolysis, steam reforming and sulfur-iodine cycle, have been conducted. The parameters that considered are the production cost, capital cost and energy cost, technological status, the independence of fossil fuel, the environmental friendly aspect, as well as the efficiency and the independence of corrosion-resistance material. The study result showed that hydrogen gas production by steam reforming is a better process compared to electrolysis and sulfur-iodine process. Therefore, steam reforming process can be a good choice for hydrogen gas production using nuclear energy in Indonesia. (author)

  10. Evaluation of the efficiency of alternative enzyme production technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albaek, M.O.

    2012-03-15

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact on for example the emission of green house gasses. Cellulases and hemi-cellulases are used for enzymatic hydrolysis of pretreated lignocellulosic biomass, and fermentable sugars are released upon the enzymatic process. Even though many years of research has decreased the amount of enzyme needed in the process, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial production of cellulases and hemi-cellulases. The aim of the thesis was to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During fermentation, filamentous growth of the fungus lead to increased viscosity which hindered mass transfer. These mechanisms were described by a viscosity model based on the biomass concentration of the fermentation broth and a mass transfer correlation that incorporated a viscosity term. An analysis of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative

  11. Production technologies for molybdenum-99 and technetium-99m

    International Nuclear Information System (INIS)

    1999-02-01

    Technetium-99m (6.02 h) is the most widely used radioisotope in nuclear medicine, accounting for more than 80% of all diagnostic nuclear medicine procedures. It is almost exclusively produced from the decay of its parent 99 Mo. The present sources of 99 Mo are research reactors by using the (n,γ) nuclear reaction with natural Mo ( 98 Mo, ∼24%), resulting in inexpensive but low-specific activity 99 Mo, or by neutron-induced fission of 235 U, which results in expensive but high specific activity 99 Mo. This publication covers several aspects related to the production of 99 Mo and 99m Tc. The contributed papers reflect the current status of the technology and discuss potential alternative methodologies for the production of 99 Mo and 99m Tc for medical use. The first four papers address the technologies using nuclear reactors, including the description of a new method using an aqueous homogenous reactor core for production of fission 99 Mo and the latest development efforts to fabricate 235 U low enriched targets (LEU, 235 U). The next five papers discuss the potential of utilizing particle accelerators and assess the current status of the available nuclear data for the production of both, 99 Mo and 99m Tc with proton and deuteron beams. The last paper discusses a new technology based on gel system for the preparation of 99 Mo/ 99m Tc generators using low specific activity 99 Mo produced in research reactors by the neutron activation of natural and inexpensive molybdenum oxide targets. Each individual paper was indexed and abstracted

  12. Analysis on Pollution Factors in Asparagus Production and Research on Safety Production Technology

    OpenAIRE

    Ma, Liping; Hao, Bianqing; Qiao, Xiongwu

    2013-01-01

    Based on the analysis on the infection degree, infection law and influencing factors of the main diseases on asparagus and the analysis on the pollution factors in asparagus production such as blind pesticide use, atmospheric pollution and acid rain, the pollution of soil and fertilizer, this article proposes asparagus safety production technologies which include the selection of disease-resistant variety and suitable planting field, scientific and reasonable disease control, balanced fertili...

  13. MODERN TECHNOLOGICAL SOLUTIONS USED IN THE PRODUCTION OF BAKERY PRODUCTS WITH HIGH BIOLOGICAL VALUE

    OpenAIRE

    Marta Brodowska; Dominika Guzek; Agnieszka Wierzbicka

    2014-01-01

    Biological value of the food products is a result of the presence of bioactive substances and the proportions of the components. Technological development allows to optimize and accelerate the processes of bread production and increase value of food. Bakery industry used whole grains and pseudocereals as additional source of active compounds, biotechnological techniques as using appropriate yeast strain and encapsulation, which provide protection of substance and their controlled release in p...

  14. Electrospinning versus fibre production methods: from specifics to technological convergence.

    Science.gov (United States)

    Luo, C J; Stoyanov, Simeon D; Stride, E; Pelan, E; Edirisinghe, M

    2012-07-07

    Academic and industrial research on nanofibres is an area of increasing global interest, as seen in the continuously multiplying number of research papers and patents and the broadening range of chemical, medical, electrical and environmental applications. This in turn expands the size of the market opportunity and is reflected in the significant rise of entrepreneurial activities and investments in the field. Electrospinning is probably the most researched top-down method to form nanofibres from a remarkable range of organic and inorganic materials. It is well known and discussed in many comprehensive studies, so why this review? As we read about yet another "novel" method producing multifunctional nanomaterials in grams or milligrams in the laboratory, there is hardly any research addressing how these methods can be safely, consistently and cost-effectively up-scaled. Despite two decades of governmental and private investment, the productivity of nanofibre forming methods is still struggling to meet the increasing demand. This hinders the further integration of nanofibres into practical large-scale applications and limits current uses to niche-markets. Looking into history, this large gap between supply and demand of synthetic fibres was seen and addressed in conventional textile production a century ago. The remarkable achievement was accomplished via extensive collaborative research between academia and industry, applying ingenious solutions and technological convergence from polymer chemistry, physical chemistry, materials science and engineering disciplines. Looking into the present, current advances in electrospinning and nanofibre production are showing similar interdisciplinary technological convergence, and knowledge of industrial textile processing is being combined with new developments in nanofibre forming methods. Moreover, many important parameters in electrospinning and nanofibre spinning methods overlap parameters extensively studied in industrial

  15. Effect of Recipe and Production Technology of Chocolate Products on Their Quality During Storage

    Directory of Open Access Journals (Sweden)

    Lenka Machálková

    2017-01-01

    Full Text Available The effect of four storage temperature modes (6, 12, 20 and 30 °C on sensory properties of chocolate products and their colour changes in the experiment over a period of 6 months. The results were evaluated with regard to the production technology and composition of chocolate products. The experiment was performed on filled milk chocolate product called Orion Pistachio made in four versions such as a standard containing cocoa mass of 35 % referred to retempered variant (RS and not treated by retempering (NS variant and with higher proportion of cocoa mass (45 % stated as retempered variant (R45 and not treated by retempering (N45 variant. Retempering means the exposure of products for 24 hours at 24 °C immediately after the production and packaging. The results show that the technology of retempering can effectively increase the resistance of chocolate products to the fat bloom as reflected in the improved colour stability. Sensory most acceptable products were stored at 6 and 12 °C throughout the experiment.

  16. Visions on energy production technologies for Finland up to 2030

    International Nuclear Information System (INIS)

    Kara, Mikko

    2003-01-01

    The energy sector will face major challenges in the coming decades. Global demand for primary energy is continuously increasing, as are its related environmental effects. On the other hand, the limited resources of especially oil and gas will lead to increasing price instability. Deregulation of energy markets is a challenge for the infrastructure. This deregulation is leading to restructuring of the energy market. States and owners of energy companies and energy policy decision-makers will find it difficult to play this double role. At European level and in Finland the biggest challenge is the attainment of the Kyoto target and then further reduction of greenhouse gas emissions. Renewables, nuclear power and growing imports of natural gas from Russia will play a crucial role in Finland. This presentation focuses on the development of the energy production technologies that are most important for Finland's energy supply and energy technology exports. In order to analyse the possible role of various emerging and evolving technologies in the future energy system of Finland, three scenarios has been created for a comprehensive energy system model. The model is based on a bottom-up, technology oriented representation of the energy system, including both the supply and end-use sector. Mathematically, the model is a quasi-dynamic linear optimisation model that stimulates the behaviour of energy-economic decision-making by minimising the total present value of all costs and other expenditures in the energy system during the entire time horizon under consideration. (BA)

  17. Biodegradation of partially hydrolyzed polyacrylamide by bacteria isolated from production water after polymer flooding in an oil field

    International Nuclear Information System (INIS)

    Bao Mutai; Chen Qingguo; Li Yiming; Jiang Guancheng

    2010-01-01

    Partially hydrolyzed polyacrylamide (HPAM) in production water after polymer flooding in oil filed causes environmental problems, such as increases the difficulty in oil-water separation, degrades naturally to produce toxic acrylamide and endanger local ecosystem. Biodegradation of HPAM may be an efficient way to solve these problems. The biodegradability of HPAM in an aerobic environment was studied. Two HPAM-degrading bacterial strains, named PM-2 and PM-3, were isolated from the produced water of polymer flooding. They were subsequently identified as Bacillus cereus and Bacillus sp., respectively. The utilization of HPAM by the two strains was explored. The amide group of HPAM could serve as a nitrogen source for the two microorganisms, the carbon backbone of these polymers could be partly utilized by microorganisms. The HPAM samples before and after bacterial biodegradation were analyzed by the infrared spectrum, high performance liquid chromatography and scanning electronic microscope. The results indicated that the amide group of HPAM in the biodegradation products had been converted to a carboxyl group, and no acrylamide monomer was found. The HPAM carbon backbone was metabolized by the bacteria during the course of its growth. Further more, the hypothesis about the biodegradation of HPAM in aerobic bacterial culture is proposed.

  18. Intelligent technologies in process of highly-precise products manufacturing

    Science.gov (United States)

    Vakhidova, K. L.; Khakimov, Z. L.; Isaeva, M. R.; Shukhin, V. V.; Labazanov, M. A.; Ignatiev, S. A.

    2017-10-01

    One of the main control methods of the surface layer of bearing parts is the eddy current testing method. Surface layer defects of bearing parts, like burns, cracks and some others, are reflected in the results of the rolling surfaces scan. The previously developed method for detecting defects from the image of the raceway was quite effective, but the processing algorithm is complicated and lasts for about 12 ... 16 s. The real non-stationary signals from an eddy current transducer (ECT) consist of short-time high-frequency and long-time low-frequency components, therefore a transformation is used for their analysis, which provides different windows for different frequencies. The wavelet transform meets these conditions. Based on aforesaid, a methodology for automatically detecting and recognizing local defects in bearing parts surface layer has been developed on the basis of wavelet analysis using integral estimates. Some of the defects are recognized by the amplitude component, otherwise an automatic transition to recognition by the phase component of information signals (IS) is carried out. The use of intelligent technologies in the manufacture of bearing parts will, firstly, significantly improve the quality of bearings, and secondly, significantly improve production efficiency by reducing (eliminating) rejections in the manufacture of products, increasing the period of normal operation of the technological equipment (inter-adjustment period), the implementation of the system of Flexible facilities maintenance, as well as reducing production costs.

  19. Electron beam technology for production of preparations of immobilized enzymes

    International Nuclear Information System (INIS)

    Gonchar, A.M.; Auslender, V.L.; Polyakov, V.A.

    1995-01-01

    Possibility of electron beam usage for proteases immobilization on 1,4-polyalkylene oxide (1,4-PAO) was studied to obtain biologically active complex for multi-purpose usage. It is shown that immobilization of Bacillus Subtilis protease is done due to free-radical linking of enzyme and carrier with formation of mycelium-like structures. Immobilization improves heat resistance of enzyme up to 60 centigrade without substrate and up to 80 centigrade in presence of substrate, widens range pH activity in comparison with non-immobilized forms. Immobilized proteases does not contain peroxides and long-live radicals. Our results permitted to create technologies for production of medical and veterinary preparations, active components for wool washing agents and leather fabrication technology

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, TETRATEC PTFE PRODUCTS, TETRATEX 6212 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  1. Scientific production and technological production: transforming a scientific paper into patent applications.

    Science.gov (United States)

    Dias, Cleber Gustavo; Almeida, Roberto Barbosa de

    2013-01-01

    Brazil has been presenting in the last years a scientific production well-recognized in the international scenario, in several areas of knowledge, according to the impact of their publications in important events and especially in indexed journals of wide circulation. On the other hand, the country does not seem to be in the same direction regarding to the technological production and wealth creation from the established scientific development, and particularly from the applied research. The present paper covers such issue and discloses the main similarities and differences between a scientific paper and a patent application, in order to contribute to a better understanding of both types of documents and help the researchers to chose and select the results with technological potential, decide what is appropriated for industrial protection, as well as foster new business opportunities for each technology which has been created.

  2. MODERN TECHNOLOGICAL SOLUTIONS USED IN THE PRODUCTION OF BAKERY PRODUCTS WITH HIGH BIOLOGICAL VALUE

    Directory of Open Access Journals (Sweden)

    Marta Brodowska

    2014-06-01

    Full Text Available Biological value of the food products is a result of the presence of bioactive substances and the proportions of the components. Technological development allows to optimize and accelerate the processes of bread production and increase value of food. Bakery industry used whole grains and pseudocereals as additional source of active compounds, biotechnological techniques as using appropriate yeast strain and encapsulation, which provide protection of substance and their controlled release in production of functional bread. The adding to bread fruits, vegetables and condiments may increase content of vitamin, minerals, dietary fiber and other bioactive compounds.

  3. The keyhole GTAW technology: a new welding technology joining quality and productivity

    International Nuclear Information System (INIS)

    Le Port, P.; Laugier, M.; Scandella, F.; Lawrjaniec, D.; Boucher, Ch.

    2006-01-01

    This paper is a literature review regarding the keyhole GTAW technology, which has been developed and first used for industrial applications in Australia. The process enables single pass welding of a wide range of materials including stainless steels, titanium and nickel alloys, up to 12 mm thick. Process parameters (welding current, arc voltage, travel speed, the type of shielding gas and tungsten electrode dimensions) are discussed with regards to keyhole formation and stability. A comparison between standard GTAW and keyhole GTAW is provided for the welding of 12 mm thick stainless steel and titanium, showing the substantial increase in productivity that can be achieved with this new technology. Institut de Soudure has taken part in a European project aimed at assessing the possibilities of the keyhole GTAW technology. (authors)

  4. Product and technology innovation: what can biomimicry inspire?

    Science.gov (United States)

    Lurie-Luke, Elena

    2014-12-01

    Biomimicry (bio- meaning life in Greek, and -mimesis, meaning to copy) is a growing field that seeks to interpolate natural biological mechanisms and structures into a wide range of applications. The rise of interest in biomimicry in recent years has provided a fertile ground for innovation. This review provides an eco-system based analysis of biomimicry inspired technology and product innovation. A multi-disciplinary framework has been developed to accomplish this analysis and the findings focus on the areas that have been most strikingly affected by the application of biomimicry and also highlight the emerging trends and opportunity areas. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. OUTSOURCING NEW PRODUCT DEVELOPMENT FOSTERED BY DISRUPTIVE TECHNOLOGICAL INNOVATION

    DEFF Research Database (Denmark)

    CANTONE, LUIGI; TESTA, PIERPAOLO; HOLLENSEN, SVEND

    2018-01-01

    is that of aircraft industry. Therefore, this article discusses the findings of an empirical research that explores an embedded and in-depth longitudinal case study, namely, the Boeing 787-8 programme (the first model of the B787 Dreamliner programme). This new aircraft is a disruptive technology product innovation...... outsourcing strategies related to the Boeing 787 Dreamliner programme. The research question that we aim to answer is: which strategic dimensions in a decision-making model are able to extensively and thoroughly address the outsourcing decisions relating to NPD activities given the hypothesis...

  6. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.; Brown, Scott A.

    2011-09-29

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

  7. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-09-28

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

  8. Soviets may halt production drop with outside funds, technologies

    International Nuclear Information System (INIS)

    Riva, J.P. Jr.

    1991-01-01

    In a long history of Soviet oil production, a normal development progression has occurred in which several prolific oil provinces have been discovered in sequence, become dominant producers, and then declined. The present drop in Soviet oil output is partly the result of the natural decline of many of its large older fields, but also it is due to reduced capital investments in the domestic oil industry and to the reliance on outdated and inefficient exploration and development technology. This paper reports that financial and technical problems can be remedied by joint ventures with foreign oil companies. Despite these limitations, the Soviet Union has led the world in oil production ever since 1974, often by a considerable margin

  9. Nickel production in Serbia-technological and environmental aspects

    Directory of Open Access Journals (Sweden)

    Željko Kamberović

    2014-12-01

    Full Text Available Demand for nickel is constantly growing due to the versatility of its application, at the first place for stainless steel production. Ore reserves and possibility of nickel production of today’s Serbia and in neighboring countries were thoroughly investigated, and presented work is part of a wider project of sublimation of scientific and professional experience in the field of nickel extractive metallurgy on domestic raw materials. Presented research explores the possibility of high pressure sulfuric acid leaching of Serbian lateritic ores from localities Rudjinci, Ba and Lipovac. All three investigated ore deposits behaved differently both during preparation and during hydrometallurgical treatment. As optimal method for ore preparation proved to be crushing-milling-sieving route, but without possibility of concentrate production. Only for Rudjinci ore deposit achieved leaching efficiency reached satisfactory level of 95%. Within presented paper flow-sheet is proposed for processing high-magnesium laterite ores, with iron and magnesium oxide Both could be recirculated and used again in technological process; MgO for iron precipitation and SO2 for production of leaching agent, sulfuric acid. Final decision on the sustainability of the process will be made according to techno-economic and environmental evaluation. Estimated overall impact of the project implementation on the environment is negative.

  10. Comparison of partial and full nitrification processes applied for treating high-strength nitrogen wastewaters: microbial ecology through nitrous oxide production.

    Science.gov (United States)

    Ahn, Joon Ho; Kwan, Tiffany; Chandran, Kartik

    2011-04-01

    The goal of this study was to compare the microbial ecology, gene expression, biokinetics, and N2O emissions from a lab-scale bioreactor operated sequentially in full-nitrification and partial-nitrification modes. Based on sequencing of 16S rRNA and ammonia monooxygenase subunit A (amoA) genes, ammonia oxidizing bacteria (AOB) populations during full- and partial-nitrification modes were distinct from one another. The concentrations of AOB (XAOB) and their respiration rates during full- and partial-nitrification modes were statistically similar, whereas the concentrations of nitrite oxidizing bacteria (XNOB) and their respiration rates declined significantly after the switch from full- to partial-nitrification. The transition from full-nitrification to partial nitrification resulted in a protracted transient spike of nitrous oxide (N2O) and nitric oxide (NO) emissions, which later stabilized. The trends in N2O and NO emissions correlated well with trends in the expression of nirK and norB genes that code for the production of these gases in AOB. Both the transient and stabilized N2O and NO emissions during partial nitrification were statistically higher than those during steady-state full-nitrification. Based on these results, partial nitrification strategies for biological nitrogen removal, although attractive for their reduced operating costs and energy demand, may need to be optimized against the higher carbon foot-print attributed to their N2O emissions.

  11. Bioelectricity Production from Microalgae-Microbial Fuel Cell Technology (MMFC

    Directory of Open Access Journals (Sweden)

    da Costa Carlito

    2018-01-01

    Full Text Available Microbial fuel cell is an ecological innovative technology producing bioelectricity by utilizing microbes activity. Substituent energy is produced by changing the chemical energy to electrical energy through the catalytic reaction of microorganism. The research aims to find out the potency of bioelectricity produced by microalgae microbial fuel cell technology by utilizing the combination of tapioca wastewater and microalgae cultivation. This research is conducted through the ingredients preparation stage – microalgae culture, wastewater characterization, membrane and graphite activation, and the providing of other supporting equipment. The next stage is the MMFC arrangement, while the last one is bioelectricity measurement. The result of optimal bioelectricity production on the comparison of electrode 2 : 2, the power density is 44,33 mW/m2 on day 6, meanwhile, on that of 1 : 1, 20,18 mW/m2 power density on day 1 is obtained. It shows that bioelectricity can be produced from the combination of tapioca wastewater and microalgae culture through the microalgae-microbial fuel cell (MMFC technology.This research is expected to be a reference for the next research particularly the one that observes the utilizing of microalgae as the part of new and renewable energy sources.

  12. Utilizing Solar Power Technologies for On-Orbit Propellant Production

    Science.gov (United States)

    Fikes, John C.; Howell, Joe T.; Henley, Mark W.

    2006-01-01

    The cost of access to space beyond low Earth orbit may be reduced if vehicles can refuel in orbit. The cost of access to low Earth orbit may also be reduced by launching oxygen and hydrogen propellants in the form of water. To achieve this reduction in costs of access to low Earth orbit and beyond, a propellant depot is considered that electrolyzes water in orbit, then condenses and stores cryogenic oxygen and hydrogen. Power requirements for such a depot require Solar Power Satellite technologies. A propellant depot utilizing solar power technologies is discussed in this paper. The depot will be deployed in a 400 km circular equatorial orbit. It receives tanks of water launched into a lower orbit from Earth, converts the water to liquid hydrogen and oxygen, and stores up to 500 metric tons of cryogenic propellants. This requires a power system that is comparable to a large Solar Power Satellite capable of several 100 kW of energy. Power is supplied by a pair of solar arrays mounted perpendicular to the orbital plane, which rotates once per orbit to track the Sun. The majority of the power is used to run the electrolysis system. Thermal control is maintained by body-mounted radiators; these also provide some shielding against orbital debris. The propellant stored in the depot can support transportation from low Earth orbit to geostationary Earth orbit, the Moon, LaGrange points, Mars, etc. Emphasis is placed on the Water-Ice to Cryogen propellant production facility. A very high power system is required for cracking (electrolyzing) the water and condensing and refrigerating the resulting oxygen and hydrogen. For a propellant production rate of 500 metric tons (1,100,000 pounds) per year, an average electrical power supply of 100 s of kW is required. To make the most efficient use of space solar power, electrolysis is performed only during the portion of the orbit that the Depot is in sunlight, so roughly twice this power level is needed for operations in sunlight

  13. Development of nondestructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Dae; Lohumi, Santosh; Cho, Byoung Kwan [Dept. of Biosystems Machinery Engineering, Chungnam National University, Daejeon (Korea, Republic of); Kim, Moon Sung [United States Department of Agriculture Agricultural Research Service, Washington (United States); Lee, Soo Hee [Life and Technology Co.,Ltd., Hwasung (Korea, Republic of)

    2014-08-15

    This study was conducted to develop a non-destructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression(PLSR). Garlic and ginger powder, which are used as natural seasoning and in health supplement foods, were selected for this experiment. Samples were adulterated with corn starch in concentrations of 5-35%. PLSR models for adulterated garlic and ginger powders were developed and their performances evaluated using cross validation. The R{sup 2}{sub c} and SEC of an optimal PLSR model were 0.99 and 2.16 for the garlic powder samples, and 0.99 and 0.84 for the ginger samples, respectively. The variable importance in projection (VIP) score is a useful and simple tool for the evaluation of the importance of each variable in a PLSR model. After the VIP scores were taken pre-selection, the Raman spectrum data was reduced by one third. New PLSR models, based on a reduced number of wavelengths selected by the VIP scores technique, gave good predictions for the adulterated garlic and ginger powder samples.

  14. Development of nondestructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression

    International Nuclear Information System (INIS)

    Lee, Sang Dae; Lohumi, Santosh; Cho, Byoung Kwan; Kim, Moon Sung; Lee, Soo Hee

    2014-01-01

    This study was conducted to develop a non-destructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression(PLSR). Garlic and ginger powder, which are used as natural seasoning and in health supplement foods, were selected for this experiment. Samples were adulterated with corn starch in concentrations of 5-35%. PLSR models for adulterated garlic and ginger powders were developed and their performances evaluated using cross validation. The R 2 c and SEC of an optimal PLSR model were 0.99 and 2.16 for the garlic powder samples, and 0.99 and 0.84 for the ginger samples, respectively. The variable importance in projection (VIP) score is a useful and simple tool for the evaluation of the importance of each variable in a PLSR model. After the VIP scores were taken pre-selection, the Raman spectrum data was reduced by one third. New PLSR models, based on a reduced number of wavelengths selected by the VIP scores technique, gave good predictions for the adulterated garlic and ginger powder samples.

  15. Amarone: a modern wine coming from an ancient production technology.

    Science.gov (United States)

    Paronetto, Lanfranco; Dellaglio, Franco

    2011-01-01

    Amarone wine is a renowned dry red wine produced in Valpolicella (Verona, Northern Italy). It is made from local grapes varieties (Corvina, Rondinella, and Molinara) that are slowly dried under natural conditions during the fall into winter. After the postharvest drying, carried out for several weeks in dedicated lofts called fruttaio, the grapes are vinified: crushed, given prefermentative cold maceration, undergo alcoholic fermentation on the skins, malolactic fermentation, and finally maturation. The partially dried grapes are traditionally crushed during the second half of January to February. Because cellar conditions are unfavorable for either alcohol or malolactic fermentation, selected microbial cultures (yeasts and malolactic bacteria) are often necessary to correctly manage fermentation. The progress of both fermentation processes needs constant surveillance. During maturation conducted in vessels or wooden containers (tonneau in durmast oak), clarification and stabilization lead to improvements in quality. Product specifications require that Amarone not be bottled before the wine has been aged for 2years (Anonymous (2010). Disciplinare di produzione dei vini a denominazione di Origine Controllata e Garantita "Amarone della Valpolicella". Gazzetta Ufficiale della Repubblica Italiana. Serie generale n. 84. April 12). Amarone achieved its DOCG (Controlled and Guaranteed Denomination) status in 2010. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Productivity growth and technological progress in the Brazilian agricultural sector

    Directory of Open Access Journals (Sweden)

    Marcelo Farid Pereira

    2002-12-01

    Full Text Available Starting in the 1970's, the Brazilian agricultural sector has experienced an important process of modernization, whose principal effects include advances in technological progress and gains in productivity. The primary objective of this paper is to analyze technological progress and total productivity growth in the Brazilian agricultural sector during the period from 1970 to 1996. The methodology used here is based on the Malmquist productivity index and techniques in mathematical programming called Data Envelopment Analysis. The results show that significant progress was made in this sector of the economy but concentrated in only some regions of the country.O setor agropecuário brasileiro passou por um processo de modernização a partir dos anos 70, conseqüentemente, espera-se que exista uma contrapartida de progresso tecnológico e de ganhos de produtividade para o setor. Diante de tal fato tem-se como objetivo, neste estudo, avaliar o progresso tecnológico e o crescimento da produtividade total dos fatores (PTF do setor agropecuário brasileiro ao longo do período de 1970 a 1996. A metodologia utilizada foi baseada no índice Malmquist de produtividade e nas técnicas de programação matemática denominadas de Análise de Envoltória de Dados (DEA. Os resultados alcançados foram condizentes com estudos prévios e apontam para progresso técnico e ganhos de produtividade para o setor, porém concentrados em algumas regiões.

  17. The technology of fish-vegetable feed production

    Directory of Open Access Journals (Sweden)

    Mukatova M. D.

    2016-09-01

    Full Text Available Perspective direction of the Volga-Caspian basin fisheries is increasing the productivity of aquaculture production which requires the availability of sufficient quantities of feed. The cutting waste of carp and crucian carp, crayfish processing (cephalothorax, wheat bran, soy isolate, freshwater plants – pondweed perfoliate, fish-vegetable ration, produced feeding staffs have been investigated. In researching samples of manufactured pelleted feeds the standard methods adopted in the animal feed industry have been used. The number of nitrogen-free extractives and energy value has been determined by calculation. The composition of fish-vegetable ration has been worked out. Some manufacturing inspection of fish-vegetable feed technology using proofing process has been carried out. The possibility of manufacturing on the basis of crushed fish waste of the company LLC "VES" and dry ingredients of fish-vegetable feed has been determined; the output of feed at water content of not more than 10 % is 43 % of feed mix based on the mass of directed waste equal to 84 %. The pilot batch of dry fish-vegetable feed has been investigated to establish quality indicators. It has been determined that fish-vegetable feed meets the requirements of GOST 10385–2014 "Combined feeding staffs for fishes. General specifications" as for main quality indicators and refers to economic grower for catfish and carp fish weighing more than 50 g. This reveals good palatability of the experimental batch of floating feed by carp fish species and African catfish. Thus, fish-vegetable feed manufacturing technology can be implemented in the production for processing secondary raw materials: waste from butchering fish by grinding, cooking, mixing with selected vegetable fillings which is waste of flour or grain processing industries and freshwater plants mowed annually during the reclamation works on the Volga delta.

  18. Vaginal semisolid products: Technological performance considering physiologic parameters.

    Science.gov (United States)

    Machado, Rita Monteiro; Palmeira-de-Oliveira, Ana; Martinez-de-Oliveira, José; Palmeira-de-Oliveira, Rita

    2017-11-15

    Vaginal semisolid products are frequently used to treat vaginal infections and atrophy-related symptoms of menopause. Formulations composition and the methods for their characterization, especially those developed concerning the target epithelia, are key tools to predict in vivo results at early stages of product development. However, recent studies on this subject have been almost exclusively focused on anti-HIV preparations. The aim of this work consists on improving traditional characterization methods by using physiological parameters in order to construct predictive tools to characterize a new ideal vaginal semisolid formulation whatever target it may have. Ten vaginal antimicrobial and hormonal products already available in the market were studied (Gino-Canesten®, Sertopic®, Dermofix®, Gyno-pevaryl®, Lomexin®, Gino Travogen®, Dalacin V®, Ovestin®, Blissel®, Colpotrophine®). Furthermore, Universal Placebo gel and Replens® were used for comparison. Products were characterized in terms of: pH and buffering capacity in a vaginal fluid simulant (VFS); osmolality - directly and upon dilution in VFS; textural parameters (firmness, adhesiveness and bioadhesion) using vaginal ex vivo porcine epithelium; and viscosity (including VFS dilution at 37°C and after administration on an ex vivo model). Interestingly, the majority of the tested commercial vaginal formulations did not present technological characteristics close to the ideal ones when tested under target biological conditions. The inclusion of such methodologic adaptations is expected to optimize cost-efficiency of new formulations development by predicting efficacy and safety profiles at early stages of product development. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER

    Directory of Open Access Journals (Sweden)

    I. V. Sergienko

    2015-01-01

    Full Text Available The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requirements an expediency of the most full functional ingredients complex entering into bakery products prescription structure is proved. Replacement of the first grade wheat flour by the offered prescription composition allows to slow down a bread aging, to increase periods of products storage and to improve their physical and chemical indicators on the specific volume and porosity. The bakery products "Svyatogor" at the use of 100 g of a product allow to cover daily need in protein for 38,9%, in carbohydrates – for 3,4%, fat – for 9,2%. The power value of "Svyatogor" is 897 kJ, in control 959. Biological value, % 82,7 against 53,1 in control. Thanks to it the digestibility of bread protein (in vitro method of “Svyatogor” is higher. Thanks to unique properties of the compounding components “Svyatogor” gets functional properties by full-fledged protein increasing and its best comprehensibility (in vitro, advanced structure according to the content of vitamins, mineral substances, their balanced structure and can be recommended for mass consumption and prevention of osteoporosis, atherosclerosis, anemia, for children food, pregnant women and the feeding women.

  20. Uranium as an energy source: resources, production and reserves from the point of view of technological development

    International Nuclear Information System (INIS)

    Lersow, M.

    2008-01-01

    A reliable evaluation of the uranium resources available in the future and associated strategic reserves must take into account trends in prospecting, degree of technological development of the different stages of the nuclear fuel cycle (starting with the mining industry and preparation), but in particular also the specific raw material and energy yield of future generations of fuel and reactor technology. Uranium deposits are categorised with regard to ore content and probable production costs. The intensified prospecting following the increase in the uranium price will lead to discovery of further reserves and thus continue to follow the historical trend. Uranium production is subject to increasingly stringent legal boundary conditions - mining and preparation are approved according to strict international standards to minimise the environmental effects during operation and to restore and recultivate the sites after closure. New or extended/modernised uranium production sites are based on modern semi- or fully automated technologies. Exposure to radiation and environmental effects are minimised by avoidance of tailings (in situ leaching), by relocation of preparation partial processes underground or by storage of the residues from conventional plants according to international standards. In addition to a rough prediction based on currently available data trends in resource development, uranium production, fuel production and the energy yield from uranium including the option of utilisation of transuranic elements for energy production in order to minimise the radioactive waste are discussed and applied qualitatively to estimation of the reserves. (orig.)

  1. Application of ESL (Extended Shelf Life) Technology in Drinking Milk Production

    OpenAIRE

    ÜNVER, Naciye; ÇELİK, Şerafettin

    2017-01-01

    Nowadays pasteurization andUHT are the best known and most commonly used technologies in milk production.While products which have shorter shelf life and fresh taste are obtained byusing pasteurization, products which have longer shelf life but less desirabletaste are obtained by UHT technology. ESL technology is a new method which wasdeveloped to obtain a longer shelf life product than pasteurized milk andbetter sensory quality product than UHT milk. ESL milk includes technologiessuch as mic...

  2. The development of functional cake technology based on processed Jerusalem artichoke products

    Directory of Open Access Journals (Sweden)

    G. V. Posnova

    2017-01-01

    Full Text Available Scientific and practical researches on the development of technologies of functional pastries with quality indicators satisfying customer and market demands of small enterprises are highly relevant. The purpose of studies was to develop a technology of functional cake based on processed Jerusalem artichoke products - cellulose and syrup.The recipe of the cake “Stolichnyi” was taken as a control sample.Test cake samples were prepared with partial or full replacement of sugar by Jerusalem artichoke syrup (0–100% and raisins by Jerusalem artichoke fiber (0, 50, 100%. It was found that organoleptic quality indicators of products improved by the introduction of Jerusalem artichoke syrup instead of sugar, their specific volume decreased slightly compared to the control – by 1.9–3.0%.Specific volume of cakes increased compared to the control by 5.4–11%improved by the introduction of Jerusalem artichokefiber instead of raisins, but its surface became bumpier, there were deep cracks. Specific volume of products increased by 7.8–8.8%, the surface was convex, slightly bumpy with little nicked when Jerusalem artichoke syrup and fiberwere introduced together.The humidity and the alkalinity of samples practically unchanged. The sample prepared with full replacement of sugar by syrup and raisins by fiber of Jerusalem artichoke had the best quality indicators.During storage for 5 days the smallest changes in the crumb condition and flavor were observed in cake samples with complete replacement of sugar by Jerusalem artichoke syrup, the introduction of Jerusalem artichoke fiber resulted in a slight elasticity decrease and friability crumbimprovement. The use of Jerusalem artichoke syrup and fiber in the cakes manufacture allowsto receivegoods with high nutritional value, enriched with prebiotic inulin, to expand the range of functional pastry products.

  3. Improving technology universal vegetable semi-finished products for the enterprises of food industry

    Directory of Open Access Journals (Sweden)

    M. N. Kutkina

    2016-01-01

    Full Text Available Healthy nutrition is one of the main factors that becomes stronger the human immune system, especially in the big cities, forms intellectual abilities of people, increases the qualitative characteristics of living standards etc. The most important components of a healthy nutrition are vegetables and products from them. Rather high moisture content of many vegetables, e.g., fruit, partially fills the needs of the human organism in water, lowers the energy value of the diet, enhances the motility of the gastrointestinal tract. In this regard, the improvement of technology universal product from regional vegetables available has got importance, prolonged pronounced social effect and contributes to health improvement. Among vegetables the zucchini include diet properties, but the use of them is accompanied by certain difficulties associated with seasonal logistics and the limited range of products from them. In this work, there were studied the varietal characteristics of the zucchini, zoned in the North-West region, in terms of their technological properties, morphological characteristics and biochemical composition of fruit during ripening. Were investigated the optimal ways of canning zucchini by drying with freeze-drying and infrared heating that allows you to provide catering universal semi-finished product during the whole year, not only in areas of cultivation, but also in areas outside of growing vegetables. There was discovered the effect of anomalous dehydration of fruit vegetables in the result of the study , which helped to explain the increased, in comparison with other types of vegetables, losses during heat treatment and to justify their methods and technological parameters of drying. It was found that one of the reasons for the reduction of mechanical strength parenchymal tissue of fruit vegetables, is the destruction of cell walls by increasing the pressure inside the air inclusions, in contrast to some other types of fruit

  4. Continued SOFC cell and stack technology and improved production methods

    Energy Technology Data Exchange (ETDEWEB)

    Wandel, M.; Brodersen, K.; Phair, J. (and others)

    2009-05-15

    Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

  5. Value Creation, Appropriation, and Product Design Strategies in Technology Ecosystems: Three Essays on the Role of Complementary Technologies

    Science.gov (United States)

    Miller, Cameron Dee

    2017-01-01

    Firms are often embedded in a technology ecosystem comprised of complementary technologies that span multiple product markets. In this dissertation, I examine how complementarity between the firm's technologies influences its strategies to create and appropriate value in the ecosystem. I investigate this overarching question in two contexts:…

  6. 76 FR 6839 - ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products...

    Science.gov (United States)

    2011-02-08

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products International, Inc. (n/k/a Dexx Corp.), Global Mainframe Corp., GrandeTel Technologies, Inc., Magna Entertainment Corp. (n/k/a Reorganized Magna Entertainment...

  7. Confectionery products (halva type obtained from sunflower: production technology and quality alterations. A review

    Directory of Open Access Journals (Sweden)

    Mureşan, V.

    2013-01-01

    Full Text Available Sunflower "halva" is a popular and widely enjoyed confectionery product specific to the countries of Eastern Europe. Conventional halva has historically been produced from sesame seeds in the Middle East and Northern Africa. However, in the production of halva in Eastern Europe, sesame seeds have been largely replaced by sunflower seeds, due to the high availability of sunflower in this region and the comparable taste of the final product. Due to the importance of the cost of raw materials in the food industry, utilization of sunflower seeds in halva production may be of great interest worldwide because it offers the possibility of significantly lowering production costs. Nevertheless, oil separation and storage techniques must be perfected if sunflower halva is to fulfill its promise of becoming a cost effective alternative to sesame seed halva on a worldwide scale. The aims of this review are firstly, to describe the current state of sunflower halva technology, secondly, to isolate the main problems affecting the quality of the final product, and thirdly, to suggest areas of further research necessary to move sunflower halva production closer to reaching its full potential on the world market.

  8. Technology for Price Management in Industrial Differential Product Market

    Directory of Open Access Journals (Sweden)

    E. V. Orlova

    2015-01-01

    Full Text Available The article studies price behavior of oligopolies in industrial market where price competition is replaced by non-price competition. There is a developed technology for pricing management of the products of industrial enterprises, which, unlike the existing ones, takes into account the dynamics of changes in consumer preferences and changes in the pricing policy of the enterprise competitor and is based on usage of system dynamics models to simulate the financial and economic performance of enterprises and the fuzzy model for situational analysis and decisionmaking on changes in prices for the products. A pricing simulation model is offered. It is based on system-dynamic modeling method, which takes into account the complex cause-to-effect concatenation of factors on price such as product quality, cost, price competition, price elasticity of economic demand, competitors’ quantity of output and estimates the impact of changing factors of internal and external enterprise environment on the effectiveness of its activities.The simulation model allows us to conduct diverse experiments and analyze the impact of management decisions on the efficiency of the enterprise. Based on the fuzzy approach a price decision-making model is developed. It operates not only precise (numeric values, but also qualitative assessments of variables and provides an adequate use of logical relationships and the laws of the mutual influence of market and production and economic factors. Qualitative dependences, which establish the influence of external and internal factors on the price change, are identified as a result of the study of economic laws and legal conformity that are in the context of rapid economic change and market turbulence may not be strictly formalized and take the form of linguistic statements, which express the conditional relationship between the qualitative assessments of initial factors and changes in the relative price.

  9. The crystallization processes in the aluminum particles production technology

    Directory of Open Access Journals (Sweden)

    Arkhipov Vladimir

    2015-01-01

    Full Text Available The physical and mathematical model of the crystallization process of liquid aluminum particles in the spray-jet of the ejection-type atomizer was proposed. The results of mathematical modeling of two-phase flow in the spray-jet and the crystallization process of fluid particles are given. The influence of the particle size, of the flow rate and the stagnation temperature gas in the ranges of industrial technology implemented for the production of powders aluminum of brands ASD, on the crystallization characteristics were investigated. The approximations of the characteristics of the crystallization process depending on the size of the aluminum particles on the basis of two approaches to the mathematical description of the process of crystallization of aluminum particles were obtained. The results allow to optimize the process parameters of ejection-type atomizer to produce aluminum particles with given morphology.

  10. Technological and engineering solutions in the radiopharmaceuticals production

    International Nuclear Information System (INIS)

    Gonzalez Fernandez, Angel L.; Falcon Perez, Lazaro; Diaz Jilimas, Eduardo Dimas; Sanchez Anaya, Eduardo; Maqueira Morales, Juan; Fernandez Quintero, Gerardo; Suarez Beyries, Karina

    2012-01-01

    In the work, the conception and the original design of the facilities at CENTIS, and the modifications to that they were subjected during 15 years of operation in order to fulfill the requirements of Good Manufacturing Practice (GMP), non-existent at the moment of their setting in operation, are examined. Particularly we emphasize in changes carried out to hot cells and gloves boxes, and in some aspects of the technological processes also. As a result of the work done, the CENTIS productions fulfill international standards and its facilities have been validated in correspondence with the national regulations. Steps are indicated, not only to comply with the requirements set by the norms ISO 9000 and the GMP, but to assure the optimization and flexibility in the use of the facilities. (author)

  11. Hydrogen production by ethanol partial oxidation over nano-iron oxide catalysts produced by chemical vapour synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Wael Ahmed Abou Taleb Sayed

    2011-01-13

    This work presents the experimental results of the synthesis of unsupported and supported SiC iron oxide nanoparticles and their catalytic activity towards ethanol partial oxidation. For comparison, further unsupported iron oxide phases were investigated towards the ethanol partial oxidation. These {gamma}-Fe{sub 2}O{sub 3} and {alpha}/{gamma}-Fe{sub 2}O{sub 3} phase catalysts were prepared by the CVS method using Fe(CO){sub 5} as precursor, supplied by another author. The {alpha}-Fe{sub 2}O{sub 3} and SiC nanoparticles were prepared by the CVS method using a home made hot wall reactor technique at atmospheric pressure. Ferrocene and tetramethylsilane were used as precursor for the production process. Process parameters of precursor evaporation temperature, precursor concentration, gas mixture velocity and gas mixture dilution were investigated and optimised to produce particle sizes in a range of 10 nm. For Fe{sub 2}O{sub 3}/SiC catalyst series production, a new hot wall reactor setup was used. The particles were produced by simultaneous thermal decomposition of ferrocene and tetramethylsilane in one reactor from both sides. The production parameters of inlet tube distance inside the reactor, precursor evaporation temperature and carrier gas flow were investigated to produce a series of samples with different iron oxide content. The prepared catalysts composition, physical and chemical properties were characterized by XRD, EDX, SEM, BET surface area, FTIR, XPS and dynamic light scattering (DLS) techniques. The catalytic activity for the ethanol gas-phase oxidation was investigated in a temperature range from 260 C to 290 C. The product distributions obtained over all catalysts were analysed with mass spectrometry analysis tool. The activity of bulk Fe{sub 2}O{sub 3} and SiC nanoparticles was compared with prepared nano-iron oxide phase catalysts. The reaction parameters, such as reaction temperature and O{sub 2}/ethanol ratio were investigated. The catalysts

  12. The provision of assistive technology products and services for people with dementia in the United Kingdom.

    Science.gov (United States)

    Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

    2016-07-01

    In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

  13. Thermonuclear neutron sources - a new isotope production technology

    Energy Technology Data Exchange (ETDEWEB)

    Heckman, Richard A [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-15

    With the successful detonation of the Hutch device, we have demonstrated the feasibility of a new isotope production technique. The exposure of a 238-U and 232-Th target to an extremely large neutron flux, 1.8 x 10{sup 25} neutrons/cm{sup 2}, produced super-heavy nuclides up to 257-Fm by the multiple neutron capture process. Kilogram quantities of Hutch debris were recovered by a modification of standard drilling techniques. A semicontinuous batch process was used to concentrate approximately 10{sup 10} atoms of 257-Fm from approximately 50 kg of debris. Experience from the Hutch debris recovery efforts indicates that significant engineering advances in recovery techniques and subsequent cost reductions are possible. The demonstrated success of the device clearly justifies anengineering development program. Comparing debris recovery by underground mining operations with recovery using possible advances in drilling technology does not indicate an obvious cost advantage of one system over the other. Possible advances in mining technology could change this tentative conclusion. Any novel schemes for debris concentration that might be possible through an understanding of underground nuclear detonation phonomenology would also radically affect recovery and processing economics. A preliminary process engineering design of a large-scale (a few hundred to a few thousand kilograms) processing facility located at the Nevada Test Site will be discussed. Cost estimates for isotopes produced in this facility will be described. The effects of debris concentration, 'ore' beneficiation, and total debris processed on unit costs will be discussed. These preliminary estimates show that this new isotope 'production' scheme would be competitive with existing reactor facilities. (author)

  14. Moving Technologies from the Test Tube to Commercial Products

    Science.gov (United States)

    Bryant, Robert G.

    2013-01-01

    Successful technologies include objects, processes, and procedures that share a common theme; they are being used to generate new products that create economic growth. The foundation is the invention, but the invention is a small part of the overall effort. The pathway to success is understanding the competition, proper planning, record keeping, integrating a supply chain, understanding actual costs, intellectual property (IP), benchmarking, and timing. Additionally, there are obstacles that include financing, what to make, buy, and sell, and the division of labor i.e. recognizing who is best at what task. Over the past two decades, NASA Langley Research Center (LaRC) has developed several commercially available technologies. The approach to commercialization of three of these inventions; Langley Research Center-Soluble Imide (LaRC-SI, Imitec Inc.), the Thin Layer Unimorph Driver (THUNDER, FACE International), and the Macrofiber Composite (MFC, Smart Material Corp.) will be described, as well as some of the lessons learned from the process. What makes these three inventions interesting is that one was created in the laboratory; another was built using the previous invention as part of its process, and the last one was created by packaging commercial-off-the-shelf (COTS) materials thereby creating a new component.

  15. Technological challenges for boosting coal production with environmental sustainability.

    Science.gov (United States)

    Ghose, Mrinal K

    2009-07-01

    The global energy requirement has grown at a phenomenon rate and the consumption of primary energy sources has been a very high positive growth. This paper focuses on the consumption of different primary energy sources and it identifies that coal will continue to remain as the prime energy source in foreseeable future. It examines the energy requirement perspective for India and demand of coal as the prime energy source. Economic development and poverty alleviation depend on securing affordable energy sources and Indian coal mining industry offers a bright future for the country's energy security, provided the industry is allowed to develop by supportive government policies and adopts latest technologies for mining. It is an irony that in-spite of having a plentiful reserves, India is not able to jack up coal production to meet its current and future demand. It discusses the strategies to be adopted for growth and meeting the coal demand. But such energy are very much concerned with environmental degradation and must be driven by contemporary managerial acumen addressing environmental and social challenges effectively The paper highlights the emissions of greenhouse gases due to burning of fossil fuels and environmental consequences of global warming and sea-level rise. Technological solutions for environment friendly coal mining and environmental laws for the abatement of environmental degradation are discussed in this paper.

  16. Set of information technologies and their role in automation of agricultural production

    OpenAIRE

    V. V. Al’t

    2018-01-01

    The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of a...

  17. Gel Generator Technology Viability for Small Scale Production - Indian Experience [Country report: India - GEL Gen.

    International Nuclear Information System (INIS)

    Sarkar, S.K.; Kothalkar, C.; Naskar, P.; Sneha, P.; Saraswathy, P.; Dey, A.C.; Venkatesh, Meera

    2015-01-01

    The radioisotope 99m Tc is used in nearly 80% of all diagnostic imaging procedures in nuclear medicine and hence ensuring its uninterrupted availability is of prime importance to the nuclear medicine industry. Of the various options available for accessing 99m Tc from its precursor 99 Mo through a generator system, the 99m Tc generator using a bed of acidic alumina column for column chromatographic separation of 99m Tc from 99 Mo remains the most popular procedure world over. The uninterrupted availability of high specific activity (n,f) 99 Mo, an essential requirement for the alumina column generators and produced by few large scale commercial suppliers, needs to be ensured to avoid frequent disruption in 99m Tc supplies. Alternate technologies that could use (n,γ) 99 Mo to meet partial/complete domestic demands are worth exploring to reduce import dependency/foster self-sufficiency particularly in countries having the necessary infrastructure in place. The Indian pursuit of gel generator technology for 99m Tc was driven mainly by three considerations, namely, (i) reliable, well-established and ease of production of (n,γ) 99 Mo in TBq quantities in the research reactors in Trombay/Mumbai, India, (ii) need for relatively low-cost alternate technology to replace the solvent (MEK) extraction generator system in use in India since 1970s and (iii) minimize dependency on weekly import of fission-produced 99 Mo raw material required for alumina column generator. The development of column type 99m Tc generator based on conversion of (n,γ) 99 Mo as zirconium molybdate- 99 Mo (ZrM) gel matrix and subsequent separation of 99m Tc by elution in normal saline was an important development in this direction, as this combines the advantages of using (n,γ) 99 Mo and a column based separation technique. A considerable volume of work was carried out at the Board of Radiation and Isotope Technology (BRIT) both independently and as a part of IAEA’s CRP [4,9] for standardization

  18. Advanced Electrochemical Technologies for Hydrogen Production by Alternative Thermochemical Cycles

    Energy Technology Data Exchange (ETDEWEB)

    Lvov, Serguei; Chung, Mike; Fedkin, Mark; Lewis, Michele; Balashov, Victor; Chalkova, Elena; Akinfiev, Nikolay; Stork, Carol; Davis, Thomas; Gadala-Maria, Francis; Stanford, Thomas; Weidner, John; Law, Victor; Prindle, John

    2011-01-06

    Hydrogen fuel is a potentially major solution to the problem of climate change, as well as addressing urban air pollution issues. But a key future challenge for hydrogen as a clean energy carrier is a sustainable, low-cost method of producing it in large capacities. Most of the world's hydrogen is currently derived from fossil fuels through some type of reforming processes. Nuclear hydrogen production is an emerging and promising alternative to the reforming processes for carbon-free hydrogen production in the future. This report presents the main results of a research program carried out by a NERI Consortium, which consisted of Penn State University (PSU) (lead), University of South Carolina (USC), Tulane University (TU), and Argonne National Laboratory (ANL). Thermochemical water decomposition is an emerging technology for large-scale production of hydrogen. Typically using two or more intermediate compounds, a sequence of chemical and physical processes split water into hydrogen and oxygen, without releasing any pollutants externally to the atmosphere. These intermediate compounds are recycled internally within a closed loop. While previous studies have identified over 200 possible thermochemical cycles, only a few have progressed beyond theoretical calculations to working experimental demonstrations that establish scientific and practical feasibility of the thermochemical processes. The Cu-Cl cycle has a significant advantage over other cycles due to lower temperature requirements – around 530 °C and below. As a result, it can be eventually linked with the Generation IV thermal power stations. Advantages of the Cu-Cl cycle over others include lower operating temperatures, ability to utilize low-grade waste heat to improve energy efficiency, and potentially lower cost materials. Another significant advantage is a relatively low voltage required for the electrochemical step (thus low electricity input). Other advantages include common chemical agents and

  19. A multi-layered approach to product architecture modeling: Applied to technology prototypes

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

    2016-01-01

    Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance...... and managing technology prototypes and can be correlated with improvements in the team collaboration, communication, and development performance......., added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

  20. PRODUCTIVITY AND LAND ENHANCING TECHNOLOGIES IN NORTHERN ETHIOPIA: HEALTH, PUBLIC INVESTMENTS, AND SEQUENTIAL ADOPTION

    OpenAIRE

    Ersado, Lire; Amacher, Gregory S.; Alwang, Jeffrey Roger

    2003-01-01

    The adoption of more efficient farming practices and technologies that enhance agricultural productivity and improve environmental sustainability is instrumental for achieving economic growth, food security and poverty alleviation in sub-Saharan Africa. Our research examines the interaction between public investments, community health, and adoption of productivity and land enhancing technologies by households in the northern Ethiopian state of Tigray. Agricultural technology adoption decision...

  1. Development of production technology for bio diesel fuel and feasibility test of bio diesel engine (II)

    Energy Technology Data Exchange (ETDEWEB)

    Na, Y J; Ju, U S; Park, Y C [National Kyung Sang University (Korea, Republic of)

    1996-02-01

    At the beginning of the 21 st century two urgent tasks which our global countries would face with could be the security of the alternative energy source as a preparation against the fossil energy exhaustion and the development of the clean energy source to protect the environment from pollution. The above two problems should be solved together. The bio diesel oil which is made by methylesterfication of bio oil has very low sulfur content than does the diesel oil. Therefore, there is a great possibility to solve the pollution problem caused by the exhaust gas from diesel engine vehicles. So, bio oil has been attracted with attentions as an alternative and clean energy source. Advanced countries began early to develop the bio diesel oil suitable to their respective conditions. Recently their production stage have reached to the commercial level partially. The sudden increase of energy demand followed by a rapid growth of industry and the serious situation about the environmental pollution caused by the exhaust has from diesel engine vehicles occupying 42% of distribution among all vehicles have called attention of our government to consider the importance of alternative and clean energy sources for the future on the national scale. This study is consisted of three main parts; - The development of production technology for bio diesel oil. - The development of the atomization improvement method and nozzle for high viscous vegetable oils. - Feasibility test of bio diesel engine. (author) 119 refs., 52 tabs., 88 figs.

  2. A Research Review on the Key Technologies of Intelligent Design for Customized Products

    Directory of Open Access Journals (Sweden)

    Shuyou Zhang

    2017-10-01

    Full Text Available The development of technologies such as big data and cyber-physical systems (CPSs has increased the demand for product design. Product digital design involves completing the product design process using advanced digital technologies such as geometry modeling, kinematic and dynamic simulation, multi-disciplinary coupling, virtual assembly, virtual reality (VR, multi-objective optimization (MOO, and human-computer interaction. The key technologies of intelligent design for customized products include: a description and analysis of customer requirements (CRs, product family design (PFD for the customer base, configuration and modular design for customized products, variant design for customized products, and a knowledge push for product intelligent design. The development trends in intelligent design for customized products include big-data-driven intelligent design technology for customized products and customized design tools and applications. The proposed method is verified by the design of precision computer numerical control (CNC machine tools.

  3. Reflections on the Development of a Machine Vision Technology for the Forest Products

    Science.gov (United States)

    Richard W. Conners; D.Earl Kline; Philip A. Araman; Robert L. Brisbon

    1992-01-01

    The authors have approximately 25 years experience in developing machine vision technology for the forest products industry. Based on this experience this paper will attempt to realistically predict what the future holds for this technology. In particular, this paper will attempt to describe some of the benefits this technology will offer, describe how the technology...

  4. Production of drug-loaded polymeric nanoparticles by electrospraying technology.

    Science.gov (United States)

    Sosnik, Alejandro

    2014-09-01

    The pharmaceutical industry struggles with high attrition. The outbreak of pharmaceutical micro/nanotechnology has been fundamental to overcome several (bio)pharmaceutic drawbacks of drugs such as poor aqueous solubility, physicochemical instability, short half life, inappropriate biodistribution and toxicity. The spatiotemporal release of drugs directly in the site of action and the restriction of the systemic exposure by means of nanotechnology has notoriously improved drug safety ratios. At the same time, the development of production methods that are cost-effective, scalable and reproducible under industrial settings becomes crucial to ensure the clinical translation of any development. The electrospraying process, also known as electrohydrodynamic atomization (EHDA), is a single-stage technique of liquid atomization by means of electrical forces that enables the generation of micro/nanoparticles with especially narrow size distribution. EHDA is based on the ability of an electric field to deform the interface of a liquid drop and break it into smaller mono-disperse droplets. The main advantageous features over conventional methods are the possibility to produce particles without the use of surfactants, at ambient temperature and pressure and with maximum encapsulation efficiency due to the absence of an external medium that allows the migration and/or dissolution of water-soluble cargos. In addition, the mild conditions are optimal for the encapsulation of thermo-sensitive cargos. The present article overviews the applications of this technology for the production of nano-drug delivery systems and discusses its key role to support the transfer of a broad spectrum of nanomedicines to the market.

  5. Syngas production for gas-to-liquids applications. Technologies, issues and outlook

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, D.J.; Simbeck, D.R.; Karp, A.D.; Dickenson, R.L. [SFA Pacific, Inc., 444 Castro St., Suite 720, 94041 Mountain View, CA (United States)

    2001-06-01

    The main gas-to-liquids (GTL) interest now is in Fischer-Tropsch (F-T) synthesis of hydrocarbons. While synthesis gas (syngas) for GTL can be produced from any carbon-based feedstock (hydrocarbons, coal, petroleum coke, biomass), the lowest cost routes to syngas so far are based on natural gas. Thus, the focus for GTL has been largely on associated gas, so-called stranded or remotely located gas reserves, and larger gas reserves that are not currently being economically exploited. The principal technologies for producing syngas from natural gas are: catalytic steam methane reforming (SMR), two-step reforming, autothermal reforming (ATR), partial oxidation (POX), and heat exchange reforming. The distinguishing characteristics of these technologies and their commercial uses are discussed in this paper. Ongoing R and D efforts to develop lower-cost syngas generation technologies are also briefly discussed.Relevant commercial experience with large-scale syngas generation for GTL is also discussed. As a frame of reference, in terms of syngas flow rates, a 20,000 b/day F-T plant would be comparable to three 2500 mt/day methanol plants. Single-train methanol plants are now producing more than 2500 t/day-and plants approaching 3000 mt/day have been announced. The projected relative economies of scale of the various syngas production technologies indicate that two-step reforming and ultimately, ATR, should be the technologies of choice for large-scale GTL plants. Nevertheless, for a 20,000 b/day F-T liquids plant, capital charges still dominate the manufacturing costs. Syngas production (oxygen plant and reforming) comprises half of the total capital cost of this size GTL plant. While air-blown reforming eliminates the expensive oxygen plant, air-blown reforming is unlikely to be competitive with, or offer the flexibility of, oxygen-blown reforming. The reasons for this conclusion are discussed.The proposed and future GTL facilities should be substantially less costly than

  6. Syngas production for gas-to-liquids applications. Technologies, issues and outlook

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, D.J.; Simbeck, D.R.; Karp, A.D.; Dickenson, R.L. [SFA Pacific, Inc., 444 Castro St., Suite 720, 94041 Mountain View, CA (United States)

    2001-06-01

    The main gas-to-liquids (GTL) interest now is in Fischer-Tropsch (F-T) synthesis of hydrocarbons. While synthesis gas (syngas) for GTL can be produced from any carbon-based feedstock (hydrocarbons, coal, petroleum coke, biomass), the lowest cost routes to syngas so far are based on natural gas. Thus, the focus for GTL has been largely on associated gas, so-called stranded or remotely located gas reserves, and larger gas reserves that are not currently being economically exploited. The principal technologies for producing syngas from natural gas are: catalytic steam methane reforming (SMR), two-step reforming, autothermal reforming (ATR), partial oxidation (POX), and heat exchange reforming. The distinguishing characteristics of these technologies and their commercial uses are discussed in this paper. Ongoing R and D efforts to develop lower-cost syngas generation technologies are also briefly discussed. Relevant commercial experience with large-scale syngas generation for GTL is also discussed. As a frame of reference, in terms of syngas flow rates, a 20,000 b/day F-T plant would be comparable to three 2500 mt/day methanol plants. Single-train methanol plants are now producing more than 2500 t/day-and plants approaching 3000 mt/day have been announced. The projected relative economies of scale of the various syngas production technologies indicate that two-step reforming and ultimately, ATR, should be the technologies of choice for large-scale GTL plants. Nevertheless, for a 20,000 b/day F-T liquids plant, capital charges still dominate the manufacturing costs. Syngas production (oxygen plant and reforming) comprises half of the total capital cost of this size GTL plant. While air-blown reforming eliminates the expensive oxygen plant, air-blown reforming is unlikely to be competitive with, or offer the flexibility of, oxygen-blown reforming. The reasons for this conclusion are discussed. The proposed and future GTL facilities should be substantially less costly

  7. The technologies of zirconium production for nuclear fuel components in Ukraine

    International Nuclear Information System (INIS)

    Semenov, G.R.

    2000-01-01

    Perspectives of development zirconium alloys and WWER-1000 assemble components production in Ukraine are considered. Basic technological production processes of zirconium alloys in conditions of Ukrainian enterprises and modern requirements are analyzed. The critical processes on technical and economic criteria are defined. The main directions of activity and steps on technological processes improvement for production quality providing are offered. (author)

  8. Factors driving and restraining adoption of Automation technologies in Swedish wood product industry.

    OpenAIRE

    Mapulanga, Mwanza; Saladi, Praveen

    2016-01-01

    Swedish wood product industry contributes significantly to the economy of the country. This industry adds more value to the sawn timber produced in order to manufacture different wooden products. Companies in Swedish wood product industry are presently seen as underdeveloped in terms of investments and developments in automation technologies. Automation technologies are seen by companies as a solution for improving productivity, product quality, manufacturing cost reduction and ultimately imp...

  9. Nano-sized crystalline drug production by milling technology.

    Science.gov (United States)

    Moribe, Kunikazu; Ueda, Keisuke; Limwikrant, Waree; Higashi, Kenjirou; Yamamoto, Keiji

    2013-01-01

    Nano-formulation of poorly water-soluble drugs has been developed to enhance drug dissolution. In this review, we introduce nano-milling technology described in recently published papers. Factors affecting the size of drug crystals are compared based on the preparation methods and drug and excipient types. A top-down approach using the comminution process is a method conventionally used to prepare crystalline drug nanoparticles. Wet milling using media is well studied and several wet-milled drug formulations are now on the market. Several trials on drug nanosuspension preparation using different apparatuses, materials, and conditions have been reported. Wet milling using a high-pressure homogenizer is another alternative to preparing production-scale drug nanosuspensions. Dry milling is a simple method of preparing a solid-state drug nano-formulation. The effect of size on the dissolution of a drug from nanoparticles is an area of fundamental research, but it is sometimes incorrectly evaluated. Here, we discuss evaluation procedures and the associated problems. Lastly, the importance of quality control, process optimization, and physicochemical characterization are briefly discussed.

  10. Shielding technology for high energy radiation production facility

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Kim, Heon Il

    2004-06-01

    In order to develop shielding technology for high energy radiation production facility, references and data for high energy neutron shielding are searched and collected, and calculations to obtain the characteristics of neutron shield materials are performed. For the evaluation of characteristics of neutron shield material, it is chosen not only general shield materials such as concrete, polyethylene, etc., but also KAERI developed neutron shields of High Density PolyEthylene (HDPE) mixed with boron compound (B 2 O 3 , H 2 BO 3 , Borax). Neutron attenuation coefficients for these materials are obtained for later use in shielding design. The effect of source shape and source angular distribution on the shielding characteristics for several shield materials is examined. This effect can contribute to create shielding concept in case of no detail source information. It is also evaluated the effect of the arrangement of shield materials using current shield materials. With these results, conceptual shielding design for PET cyclotron is performed. The shielding composite using HDPE and concrete is selected to meet the target dose rate outside the composite, and the dose evaluation is performed by configuring the facility room conceptually. From the result, the proper shield configuration for this PET cyclotron is proposed

  11. Development of key technology for the medical isotope production

    International Nuclear Information System (INIS)

    Oh, Soo Youl; Kim, I. S.; Kim, W. W.; Rhee, C. K.; Park, K. B.; Park, S. J.; Shin, H. S.; Shin, Y. J.

    2005-06-01

    The objective of this project is to experimentally verify and enhance Mo-99 and Sr-89 recovery/purification processes as the key technologies for the medical isotope production from a solution fuel reactor. A joint experiment was planned between KAERI and Kurchatov Institute (KI), Russia. The kinds of experiments planed are, a series of Mo-99 recovery/purification experiments from the ARGUS reactor which uses High Enriched Uranium (HEU) fuel, a series of the same experiments but from the Low Enriched Uranium (LEU) solution target, a demonstration of the mechanism of Sr-89 delivery from the air medium in the reactor vessel. Meanwhile, the survey and legalistic interpretation of relevant patents shows a possibility of infringement of TCI Inc.'s patents in case of exporting medical isotopes produced at the MIP to Japan and the US so far as the MIP adopts the concept of the Russian ARGUS and recovery/purification process. Eliminating, not minor changing, step(s) or condition(s) of patent processes would help to avoid the patent infringement. Because of a difficulty in the KAERI-KI full-time co-experiments at KI labs, a different idea between two parties about the depth of background information to be provided to KAERI, and other reasons, the experiment plan was not executed

  12. Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

    2005-01-01

    The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

  13. On information and communication technology and production cost in construction industry: evidence from the Netherlands

    NARCIS (Netherlands)

    van der Vlist, A.J; Vrolijk, M.H.; Dewulf, Geert P.M.R.

    2014-01-01

    The interplay between information and communication technology (ICT) and the competitiveness of construction firms is considered. More specifically, the question is whether firms that invest in information and communication technology have a production cost advantage. The economics literature

  14. Proceedings of the Malaysian Science and Technology Congress `94: Vol. II - new products and processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    New processes and products in the field of the Malaysian technology research were presented at the Science and Technology congress `94. Composite materials, semiconductors fabrication, optical fibers, zeolite properties etc. were discussed in 35 contributions.

  15. Proceedings of the Malaysian Science and Technology Congress '94: Vol. II - new products and processes

    International Nuclear Information System (INIS)

    1994-01-01

    New processes and products in the field of the Malaysian technology research were presented at the Science and Technology congress '94. Composite materials, semiconductors fabrication, optical fibers, zeolite properties etc. were discussed in 35 contributions

  16. Lean Production and information technology : Connection or contradiction?

    NARCIS (Netherlands)

    Riezebos, Jan; Klingenberg, Warse; Hicks, Christian

    The principles of Lean Production have enabled organisations in the manufacturing and service sectors to significantly improve their competitiveness. The application of Lean principles, derived from the Toyota Production System has enabled many organisations to Simultaneously improve productivity,

  17. Designing Cost-Competitive Technology Products through Cost Management

    NARCIS (Netherlands)

    Davila, T.; Wouters, Marc

    2004-01-01

    SYNOPSIS: As manufacturing innovations spread throughout leading organizations, product development becomes a more important source of competitive advantage. Within product development, cost management receives increasing attention. To date, cost management in new product development focuses

  18. Production method and cost of commercial-scale offshore cultivation of kelp in the Faroe Islands using multiple partial harvesting

    DEFF Research Database (Denmark)

    Grandorf Bak, Urd; Mols-Mortensen, Agnes; Gregersen, Olavur

    2018-01-01

    was conducted. The total cost per kg dw of cultivated S. latissima decreased when the number of possible harvests without re-seeding was increased (from € 36.73 to € 9.27). This work has demonstrated that large-scale kelp cultivation is possible using multiple partial harvesting in the Faroe Islands...

  19. Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-08-01

    This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  20. IRSN's opinion on the partial activity resumption for the Plutonium Technology Workshop (ATPu - INB 32) of the Cadarache Centre

    International Nuclear Information System (INIS)

    2009-10-01

    As operations had been suspended for stations where fissile materials were handled in the ATPu (Atelier de Technologie du Plutonium, Plutonium Technology Workshop) of the Cadarache Centre, this document briefly describes the concerned operations (waste treatment and evacuation, glove box dismantling, transfer section dismantling), specifies and comments the measures undertaken by the operator, and gives the IRSN opinion about the resumption of the concerned activities

  1. Effect of partially replacing a barley-based concentrate with flaxseed-based products on the rumen bacterial population of lactating Holstein dairy cows.

    Science.gov (United States)

    Castillo-Lopez, E; Moats, J; Aluthge, N D; Ramirez Ramirez, H A; Christensen, D A; Mutsvangwa, T; Penner, G B; Fernando, S C

    2018-01-01

    The effects of partial replacement of a barley-based concentrate with flaxseed-based products on the rumen bacterial population of lactating Holstein dairy cows were evaluated. Treatments fed were CONT, a normal diet that included barley silage, alfalfa hay and a barley-based concentrate that contained no flaxseed or faba beans; FLAX, inclusion of a nonextruded flaxseed-based product containing 55·0% flaxseed, 37·8% field peas and 6·9% alfalfa; EXT, similar to FLAX, but the product was extruded and EXTT, similar to FLAX, but product was extruded and field peas were replaced by high-tannin faba beans. The rumen bacterial population was evaluated by utilizing 16S rRNA gene sequencing. Most abundant phyla, families and genera were unaffected. However, some taxa were affected; for example, unsaturated fatty acid content was negatively correlated with Clostridiaceae, and tannin content was negatively correlated with BS11 and Paraprevotellaceae. Predominant rumen bacterial taxa were not affected, but the abundance of some taxa found in lower proportions shifted, possibly due to sensitivity to unsaturated fatty acids or tannins. Flaxseed-based products were effective for partially replacing barley-based concentrate in rations of lactating dairy cows. No negative effects of these products were observed on the abundance of predominant rumen bacterial taxa, with only minor shifts in less abundant bacteria. © 2017 The Authors. Journal of Applied Microbiology published by John Wiley & Sons Ltd on behalf of Society for Applied Microbiology.

  2. The role of technological innovation in creating radically new product meanings

    DEFF Research Database (Denmark)

    Krabbe, Anders Dahl

    2015-01-01

    This paper explores the concept of technological epiphanies from the literature on design driven innovation. A technological epiphany is defined as a product innovation that can be considered radical, both in terms of technology as well as the meaning and experiences it creates through its design....... Three cases of technological epiphanies from the hearing aid industry are analyzed and discussed in terms of how they represent a radical innovation in technology as well as in product meaning and which role the technological aspect has played in the radical innovation of the meaning of the product....... Three different ways in which technology can function as an enabler for the innovation of product meanings are explored and a fourth is found is found during the analysis. The paper concludes by suggesting directions for future research....

  3. Economic analysis of technological innovations to improve sustainability of pangasius production in Vietnam

    NARCIS (Netherlands)

    Ngoc, Pham Thi Anh

    2016-01-01

    In response to increasing concerns about sustainable production, a growing number of European customers expect seafood products to be certified, for example by the Aquaculture Stewardship Council (ASC) certification. Water purification technologies such as Recirculating Aquaculture Systems (RAS)

  4. Comparative evaluation by lifecycle and risk assessment of agrobiological and technological routes of production

    NARCIS (Netherlands)

    Moll, H.C.; Schoot Uiterkamp, A.J.M.

    The application of lifecycle and risk assessment methodologies for environmental assessment of agricultural products is growing and produces interesting results. This allows comparisons between agricultural and technological routes of production. An evaluation of such assessments provides increased

  5. Environmental benefits of advanced oil and gas exploration and production technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-10-01

    THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

  6. Innovation in technology for the least product price and cost - a new minimum cost relation for reductions during technological learning

    International Nuclear Information System (INIS)

    Duffey, R.B.

    2004-01-01

    By analogy with the concepts of human learning, we show and introduce a new method to obtain least product cost and price that includes the effect of innovation and technological learning in manufacturing and production. This key result is a new paradigm instead of the usual economic 'power law' formulation. The new analysis is based on extensive analysis of many technological systems, and is directly related to the presence of learning as experience is accumulated. The results agree with the observed data. By using a consistent basis, the method replaces previous empirical 'power law' descriptions of the technological learning curve with a new 'marginal minimum cost equation' (MCE). (author)

  7. The impact of information technology on productivity using structural equations technique in Iran Behnoush Company

    Directory of Open Access Journals (Sweden)

    Mina Beig

    2012-08-01

    Full Text Available Information technology plays an important role on increasing productivity in many organizations. The primary objective of the present survey is to study the impact of information technology on productivity and find a positive and significant relationship between these two factors. Structural equations technique and LISREL software are used for analysis of the questionnaires distributed among managers and some employees of Iran Behnoush Company. Organizations try to improve their performance by investment in information technology. However, many of the previous studies indicate insignificance of the impact of information technology on productivity of the organizations. The present survey studies the impact of information technology on organizations' productivity through the collected data from the above company. Results confirm existence of a positive relationship between information technology and productivity.

  8. MODERN RESOURCE-SAVING TECHNOLOGIES IN FOUNDRY PRODUCTION OF JSC «MINSK TRAKTOR PLANT»

    Directory of Open Access Journals (Sweden)

    F. A. Domotenko

    2016-01-01

    Full Text Available In article the main world tendencies of development of the production technology of sandy cores and value of this production in complex technology of manufacture of castings are considered. It is established that the most rational way of production technically and economically is manufacture of wafer sandy cores using the Cold-box-amin technology. Scientific, technical, technological and economic aspects of modernization of foundry production of JSC MTZ with complete transition to production of sandy cores on the resource-saving Cold-box-amin technology are provided. The main distinctive feature of this reequipment – all planned works are based on the domestic technological developments and the equipment created in the cooperation by specialists of JSC BELNIILIT and JSC MTZ. Within GNTP essential support to the provided works was given by the state.

  9. Green technological change. Renewable energies, policy mix and innovation. Results of the GRETCHEN project on the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany

    International Nuclear Information System (INIS)

    Rogge, Karoline S.; Breitschopf, Barbara; Mattes, Katharina; Cantner, Uwe; Graf, Holger; Herrmann, Johannes; Kalthaus, Martin; Lutz, Christian; Wiebe, Kirsten

    2015-09-01

    The report on the GRETCHEN project that was concerned with the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany covers the following issues: market and technology development of renewable energy electricity production technologies; the policy mix for renewable electricity production technologies, innovative impact of the policy mix; subordinate conclusions for politics and research.

  10. Partial replacement of wheat flour by pumpkin seed flour in the production of cupcakes filled with carob

    OpenAIRE

    BATISTA, Jaqueline Eduarda Rodrigues; BRAGA, Lucas Pereira; OLIVEIRA, Renata Corrêa de; SILVA, Edson Pablo; DAMIANI, Clarissa

    2018-01-01

    Abstract Pumpkin seeds are considered waste and its composition has high protein content, being feasible for human consumption, also reducing costs in waste treatment. In this work we provided an alternative to reuse the wastes of pumpkin seed applied in cupcakes formulation as a complementary source to wheat flour. Four formulations with different proportions of pumpkin seed flour were investigated. The effects of partial wheat flour substitution were evaluated using the parameters texture, ...

  11. TECHNOLOGY OF PRODUCTION OF METAL-CONTAINING SLAGS

    Directory of Open Access Journals (Sweden)

    O. M. Djakonov

    2011-01-01

    Full Text Available Technological operations of mechanical squeezing of water-based final tailings from lubricoolants, washing of metal-abrasive final tailings on oil lubricoolants and their magnetic separation are offered and investigated. Advantages of technology washing and magnetic separation of final tailings are ecological cleanliness of the process, high degree of clearing of metal powder and qualitative division of mixture component.

  12. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  13. New Technologies, New Approaches to Evaluating Academic Productivity

    Science.gov (United States)

    Rich, Peter J.; West, Richard E.

    2012-01-01

    Technology has enabled a proliferation of publication venues for disseminating academic work. The task of evaluating the relative quality of each of these venues is simultaneously exacerbated and resolved by the use of new technologies. In this article, the authors propose a three-pronged framework for evaluating the quality of scholarly work that…

  14. Consumer Value perceptions of food products from emerging processing technologies

    DEFF Research Database (Denmark)

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    2015-01-01

    Through a qualitative research approach, the present paper aims to explore the range and type of ‘values’ and ‘costs’ in formulating overall Consumer Value (CV) perceptions, in association with two emerging processing technologies that at the outset are neither distinctly positive nor negative...... in the eyes of consumers, in two culturally variant contexts, namely a Western society where technology is often met with skepticism (i.e., the UK); and a non-Western society where technology plays a reassuring role regarding concerns about food safety and quality (i.e., China). Results reveal that the most......-technology counterparts, who ‘allow’ more room for cultural discrepancies to impact on their CV perceptions. Overall, findings support the view that CV perceptions in the context of food produced by means of emerging processing technologies can be successfully analyzed using a multidimensional conceptualization, where CV...

  15. Sustainable production of cannabinoids with supercritical carbon dioxide technologies

    NARCIS (Netherlands)

    Perrotin-Brunel, H.

    2011-01-01

    This thesis concerns the production of natural compounds from plant material for pharmaceutical and food applications. It describes the production (extraction and isolation) of cannabinoids, the active components present in cannabis. Many cannabinoids have medicinal properties but not all

  16. Sustainable Production of Cannabinoids with Supercritical Carbon Dioxide Technologies

    NARCIS (Netherlands)

    Perrotin-Brunel, H.

    2011-01-01

    This thesis concerns the production of natural compounds from plant material for pharmaceutical and food applications. It describes the production (extraction and isolation) of cannabinoids, the active components present in cannabis. Many cannabinoids have medicinal properties but not all

  17. Technology, labor characteristics and wage-productivity gaps

    OpenAIRE

    Ilmakunnas, Pekka; Maliranta, Mika

    2003-01-01

    We use plant-level linked employer-employee data from Finland to estimate production functions where also employee characteristics (average age and education, and sex composition) are included. We also estimate similar models for wages to examine whether wages are based on productivity. Our aim is to explain productivity besides manufacturing, also in services. For the service sector plants, no data on capital input, working hours, or value added is available, and productivity has to be measu...

  18. Using Intraoral Scanning Technology for Three-Dimensional Printing of Kennedy Class I Removable Partial Denture Metal Framework: A Clinical Report.

    Science.gov (United States)

    Hu, Feng; Pei, Zhenhua; Wen, Ying

    2017-11-16

    Removable partial dentures (RPDs) are used to restore missing teeth and are traditionally fabricated using the lost-wax casting technique. The casting process is arduous, time-consuming, and requires a skilled technician. The development of intraoral scanning and 3D printing technology has made rapid prototyping of the RPD more achievable. This article reports a completed case of direct fabrication of a maxillary RPD metal framework (Kennedy Class I) using intraoral scanning and 3D printing techniques. Acceptable fit and satisfactory clinical outcome were demonstrated. Intraoral scanning and 3D printing for fabrication of the RPD metal framework is a useful alternative to conventional impression and casting techniques, especially for patients suffering from nasal obstruction or intolerance. © 2017 by the American College of Prosthodontists.

  19. Coupling the Alkaline-Surfactant-Polymer Technology and The Gelation Technology to Maximize Oil Production

    Energy Technology Data Exchange (ETDEWEB)

    Malcolm Pitts; Jie Qi; Dan Wilson; Phil Dowling; David Stewart; Bill Jones

    2005-12-01

    Performance and produced polymer evaluation of four alkaline-surfactant-polymer projects concluded that only one of the projects could have benefited from combining the alkaline-surfactant-polymer and gelation technologies. Cambridge, the 1993 Daqing, Mellott Ranch, and the Wardlaw alkaline-surfacant-polymer floods were studied. An initial gel treatment followed by an alkaline-surfactant-polymer flood in the Wardlaw field would have been a benefit due to reduction of fracture flow. Numerical simulation demonstrated that reducing the permeability of a high permeability zone of a reservoir with gel improved both waterflood and alkaline-surfactant-polymer flood oil recovery. A Minnelusa reservoir with both A and B sand production was simulated. A and B sands are separated by a shale layer. A sand and B sand waterflood oil recovery was improved by 196,000 bbls or 3.3% OOIP when a gel was placed in the B sand. Alkaline-surfactant-polymer flood oil recovery improvement over a waterflood was 392,000 bbls or 6.5% OOIP. Placing a gel into the B sand prior to an alkaline-surfactant-polymer flood resulted in 989,000 bbl or 16.4% OOIP more oil than only water injection. A sand and B sand alkaline-surfactant-polymer flood oil recovery was improved by 596,000 bbls or 9.9% OOIP when a gel was placed in the B sand.

  20. High-Technology Companies Often Turn to Colleges for Confidential 'Beta Tests' of New Products.

    Science.gov (United States)

    Turner, Judith Axler

    1988-01-01

    Beta testing--the process of trying a product in a real-world setting before releasing it commercially--exploits a natural interface between universities and high-technology industries. High-tech companies need confidential, real-world tests of new products, and universities are eager to get an early look at tomorrow's technology. (MLW)

  1. The Impact of Digital Video Technology on Production: The Case of "American Gothic."

    Science.gov (United States)

    Fink, Edward J.

    1997-01-01

    Opines that the study of video production is important in better understanding the aural/visual aspects of television, especially since television production is undergoing a digital revolution. Assesses the impact of new technologies by examining a "cutting-edge" program, "American Gothic." Finds that digital technology offers…

  2. Technological Desition of Extraction of Melanin from the Waste of Production of Sunflower-Seed Oil

    Science.gov (United States)

    Kartushina, Yu N.; Nefedieva, E. E.; Sevriukova, G. A.; Gracheva, N. V.; Zheltobryukhov, V. F.

    2017-05-01

    The research was realized in the field of the technology for re-use of waste of sunflower-seed oil production. A technological scheme of production of melanin from sunflower husk as a waste was developed. Re-cycling will give the opportunity to reduce the amount of waste and to obtain an additional source of income.

  3. The Analysis of the Available Technology of Exploiting and Applying Biohydrocarbons for Fuel Production Part I

    Directory of Open Access Journals (Sweden)

    Gielo-Klepacz Halina

    2017-08-01

    Full Text Available The article shows the current state of knowledge in the area of applying biohydrocarbons for fuel production, especially in aeronautical applications and to power compression-ignition engines. The technologies based on biochemical and thermal/chemical conversion of biomass are described. Technological potential of these technologies is evaluated. The article is based on the literature review.

  4. The develop of technology production in Spain; El impulso de la produccion tecnologica en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Labastida, J. M.

    2007-07-01

    Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

  5. Safety assesment necessary in selecting the technologies for partial decommissioning of nuclear facilities. Application to research reactors

    International Nuclear Information System (INIS)

    Niculae, O.; Stan, C.; Vladescu, G.

    2005-01-01

    The main goal of this work is identification and evaluation of safety indicators - quantities used in monitoring the safety assurance during decommissioning processes in nuclear facilities identification of safety indicators is made on basis of qualitative and quantitative analysis, effected for both normal decommissioning, as well as in case of foreseen event occurrence. The safety indicators form an integrated system which can be represented by a pyramidal structural with the following levels (in increasing complexity order): specific indicators, strategic indicators, overall indicators, safety closure. This work suggests that evaluation of safety assurance level during the conduct of a decommissioning process to be based on the overall analysis of the set of indicators emphasizing not only the evaluation of individual safety indicators but also the interdependencies between them. The evaluation method is based on the 'step-by-step' principle. The evaluation was carried-out either directly or by means of dedicated evaluation forms which cover both quantitative and qualitative aspects of the analysis. At the some time identified are the adequate protection measures for the personnel implied in decommissioning, as well as for population and environment. The paper present also technologies adequate in the decommissioning. (authors)

  6. Exploring the influence of technology size on the duration of production technology transfer implementation

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2005-01-01

    This study explores the relationship between technology size and installation time in technology transfer projects. A literature study revealed that the installation time has so far not received much attention. Current studies address the effectiveness of technology transfer rather than efficiency.

  7. Fish production practices and use of aquaculture technologies ...

    African Journals Online (AJOL)

    The study investigated types of improved aquaculture technologies used by the ... fish farmers culture fish in earthen ponds, for commercial and home consumption ... fishes/m2 (98.3%), water quality management (99.1%) and fish ...

  8. Nuclear technology and biotechnology for enhancing agricultural production in Malaysia

    International Nuclear Information System (INIS)

    Mohamad Osman

    2005-04-01

    The presentation discussed the following subjects: sustainable development, agriculture in Malaysia, role of biotechnology, role of nuclear technology, improving crops through induced mutations with Malaysian experience in rice and roselle, fusion of nuclear and biotechnology challenges and opportunities

  9. Ethylene Production Maximum Achievable Control Technology (MACT) Compliance Manual

    Science.gov (United States)

    This July 2006 document is intended to help owners and operators of ethylene processes understand and comply with EPA's maximum achievable control technology standards promulgated on July 12, 2002, as amended on April 13, 2005 and April 20, 2006.

  10. Hydroponic technology for lily flowers and bulbs production using ...

    African Journals Online (AJOL)

    Aghomotsegin

    2015-07-22

    Jul 22, 2015 ... the utilization of the hydroponic technology to produce flower and bulb of Asiatic ... when they became 2 cm long and mother bulb scales were removed at ..... cell layer culture system in Lilium:Rgeneration and transformation.

  11. Natural Gas Based Electricity Production and Low Carbon Technology Options

    Science.gov (United States)

    Concerns regarding air quality, global climate change, and the national energy security impacts of the intensive use of fossil fuels and their environmental impacts in the power generation sector have raised interest in alternative low carbon electricity generation technology and...

  12. Africa's technology options for renewable energy production and distribution

    CSIR Research Space (South Africa)

    Amigun, B

    2011-12-01

    Full Text Available This chapter presents a critical appraisal of Africa's modern energy technologies for renewable energy. It highlights issues of scale and location-specific attributes. A critical review of different renewable energies is presented, the state...

  13. Notification: EPA Investments in Information Technology Products and Services

    Science.gov (United States)

    Project #OA-FY14-0307, June 10, 2014. The U.S. Environmental Protection Agency (EPA) Office oflnspector General (OIG) plans to begin preliminary research on the EPA's management of information technology (IT) investments.

  14. Hybrid microcircuit technology handbook materials, processes, design, testing and production

    CERN Document Server

    Licari, James J

    1998-01-01

    The Hybrid Microcircuit Technology Handbook integrates the many diverse technologies used in the design, fabrication, assembly, and testing of hybrid segments crucial to the success of producing reliable circuits in high yields. Among these are: resistor trimming, wire bonding, die attachment, cleaning, hermetic sealing, and moisture analysis. In addition to thin films, thick films, and assembly processes, important chapters on substrate selections, handling (including electrostatic discharge), failure analysis, and documentation are included. A comprehensive chapter of design guidelines will

  15. Influence of Environmental Conditions in Ichthyophthiriasis Trigger to the Europeans Catfish Juveniles (Silurus Glanis Stocked into a Production System with Partially Reused Water

    Directory of Open Access Journals (Sweden)

    Sandita (Placinta Ion

    2011-10-01

    Full Text Available Currently, in Romanian aquaculture, the rearing of the European catfish into intensive production systems raises a growing interest determined by its higher technological performances. In comparison with pond traditional aquaculture, the new farming systems are characterized by modified environmental conditions that may lead, in case of exceeding thresholds of tolerability, to occurrence of stress factors, thus setting the disease conditions. From this perspective, the purpose of this paper is to present the association circumstances of the predisposed environmental conditions that have weakened the fish body resistance promoting the pathological action of Ichthyophthirius multifiliis after the transfer of European catfish juveniles (G=33.6±1.7 g, L=17.5±2.9 cm from a pond system into a tank culture system with partially reused water. During a 21-day period, some restrictive parameters of water quality have registered values far beyond the optimum interval for wells juveniles growth (t≤16oC, CmaxN-NH4+=3.62mg/l, CmaxNO2-=9.18mg/l, CmaxCl2=0.1mg/l which caused the appearance of some characteristic symptoms, such as the gills brown coloration, masking the first symptoms of ichthyophthiriasis and contributing to the subclinical evolution of the disease. The concentrations of water chemical parameters were determined by spectrophotometer methods using Merck kits, analogous to standard methods. Subsequently, the “ich” diagnosis was confirmed by microscopic examination of the gills and skin scrapings highlighting the presence of parasites. In order to alleviate methaemoglobinaemia and parasite treatment, sodium chloride was gradually added in water till 1 ppt concentration. Maintaining the salinity of the system led to a reduction of gills parasitic intensity, while mature trophonts encapsulated in the skin were protected by mucus hypersecretion. Finally, the destruction of gill epithelium seriously affected the osmoregulation

  16. Printing versus coating - What will be the future production technology for printed electronics?

    Energy Technology Data Exchange (ETDEWEB)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

    2015-02-17

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  17. Nitrous oxide production in intermittently aerated Partial Nitritation-Anammox reactor: oxic N2O production dominates and relates with ammonia removal rate

    DEFF Research Database (Denmark)

    Blum, Jan-Michael; Jensen, Marlene Mark; Smets, Barth F.

    2018-01-01

    Emissions of the greenhouse gas nitrous oxide from the Partial Nitritation-Anammox process are of concern and can determine the carbon footprint of the process. In order to reduce nitrous oxide emissions intermittent aeration regimes have been shown to be a promising mode of operation, possibly due...

  18. Progress in Establishment of Fission Mo Production Technology in Korea

    International Nuclear Information System (INIS)

    Lee, Jun Sig

    2013-01-01

    Research activities have been made in both the development of the fission Mo production process and the designing of the production facility that will be established at Kijang, Korea including a new research reactor in 2017. Progress in the process development for target preparation, target dissolution, Mo extraction, and purification has been made. It is also a great concern to minimize the radioactive wastes or at least to generate the wastes in readily treatable forms in the project. After series of cold experiments, the target dissolution and solution formulation for a column operation are optimized. Progress in the design of the production facility has been made. Two trains of hot cells including the waste storages have been proposed for the alternative operation of the facility. A radioisotope production facility is designed to locate next to the fission Mo production building to provide a simpler and easier handling pathway of the products

  19. The environmentally friendly technology for bio fuel production

    International Nuclear Information System (INIS)

    Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

    2003-01-01

    Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

  20. The Current Status of Biodiesel Production Technology: A Review

    Directory of Open Access Journals (Sweden)

    Rizal Alamsyah

    2007-12-01

    Full Text Available Biodiesel is addressed to the name of fuel which consist of mono-alkyl ester that made from renewable and biodegradable resources, such as oils from plants (vegetable oils, waste or used cooking oil, and animal fats. Such oils or fats are chemically reacted with alcohols or methanol In producing chernical compounds called fatty acid methyl ester (FAME and these reactions are called transesterification and esterification. Glycerol, used in the pharmaceutical and cosmetics industry is produced from biodiesel production as a by-product. Researches on biodiesel as an alternative petroleum diesel have been done for more than 20 years. Transesterification reaction can be acid-catalyzed, alkali-catatyzed, or enzyme-catalyzed. Commercially biodiesel is processed by transesterification with alkali catalyst. This process, however, requires refining of products and recovery of catalysts, Such biodiesel production accelerates researches on biodiesel to obtain simpler methods, better quality. and minimum production cost. Besides the catalytic production for biodiesel, there is a method for biodiesel production namely non-catalytic production. Non-catalytic transesterification method was developed since catalytic tranestertfification still has two main problems assoclated With long reaction time and complicated purification. The first problem occurres because of the two phase nature of vegetable oil/methanol mixture, and the last problem is due to purification of catalyst and glycerol. The application of catalytic tranestertfication method leads to condition of high biodiesel production cost and high energy consumption. This paper provides information of biodiesel production progress namely catalytic tranestertfification (acid, alkali, and enzymatic tranesterfification, and non-catalytic tranesterification (at sub-critical­-supercritical temperature under pressurized conditions. It was found that every method of biodiesel production still has advantages and

  1. Study on technology for radioactive waste treatment and management from uranium production

    International Nuclear Information System (INIS)

    Vu Hung Trieu; Vu Thanh Quang; Nguyen Duc Thanh; Trinh Giang Huong; Tran Van Hoa; Hoang Minh Chau; Ngo Van Tuyen; Nguyen Hoang Lan; Vuong Huu Anh

    2007-01-01

    There is some solid and liquid radioactive waste created during producing Uranium that needs being treated and managed to keep our environment safe. This radioactive waste contains Uranium (U-238), Thorium (Th-232), Radium (Ra-226) and some heavy metals and mainly is low radioactive waste. Our project has researched and built up appropriate technology for treating and managing the radioactive waste. After researching and experimenting, we have built up four technology processes as follows: Technology for separating Radium from liquid waste; Technology for treating and managing solid waste containing Ra; Technology for separating Thorium from liquid waste after recovering radium; Technology for stabilizing solid waste from Uranium production. (author)

  2. 78 FR 63162 - Certain Lined Paper Products From India: Notice of Partial Rescission and Preliminary Results of...

    Science.gov (United States)

    2013-10-23

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-533-843] Certain Lined Paper Products... certain lined paper products (CLPP) from India.\\2\\ The period of review (POR) is September 1, 2011... Petitioners are the Association of American School Paper Suppliers (AASPS) and its individual members. \\2\\ See...

  3. Impact of improved wheat technology adoption on productivity and ...

    African Journals Online (AJOL)

    Wheat (Triticum aestivum L.) is one of the most important cereal crops cultivated in wide range of agro-ecologies in Eastern Africa. However, wheat productivity has remained low. This study was carried out in Ethiopia Aris Zone to determine the level and impact of adoption of improved wheat varieties on wheat productivity ...

  4. Amino acids production focusing on fermentation technologies – A review

    DEFF Research Database (Denmark)

    D'Este, Martina; Alvarado-Morales, Merlin; Angelidaki, Irini

    2018-01-01

    Amino acids are attractive and promising biochemicals with market capacity requirements constantly increasing. Their applicability ranges from animal feed additives, flavour enhancers and ingredients in cosmetic to specialty nutrients in pharmaceutical and medical fields. This review gives...... an overview of the processes applied for amino acids production and points out the main advantages and disadvantages of each. Due to the advances made in the genetic engineering techniques, the biotechnological processes, and in particular the fermentation with the aid of strains such as Corynebacterium...... glutamicum or Escherichia coli, play a significant role in the industrial production of amino acids. Despite the numerous advantages of the fermentative amino acids production, the process still needs significant improvements leading to increased productivity and reduction of the production costs. Although...

  5. Measuring a Country's Product Ladder and Technology Level based on Trade Flow

    Directory of Open Access Journals (Sweden)

    Jong-il Kim

    2006-06-01

    Full Text Available This study tries to quantify the technology level of products based on the concept of product ladder. While many studies on country technology competitiveness use the aggregate indices such as total factor productivity and revealed comparative advantage, this study estimates the ranking of about 2000 products in product ladder by using SITC 5 digit level export data. Based on the product ladder, this study measures the country and industry ranking and explores the characteristics of the ranking. It provides the international comparison of inter-industry and intra-industry ranking differences in product ladder. The statistical relationships between the ranking in product ladder and the determinants of technology level such as R&D and physical capital investment and wage, confirms that the measured ranking in product ladder could be regarded as an indirect indicator of technology level. The product ladder is applied to the estimation of production function to see the effect of the product differentiation on labor productivity.

  6. Set of information technologies and their role in automation of agricultural production

    Directory of Open Access Journals (Sweden)

    V. V. Al’t

    2018-01-01

    Full Text Available The modern enterprises of agrarian and industrial complex are characterized by the high level of automation of technological processes. The technological development level conformto 5th and 6th technology revolutions. The automatic and automated technologies in crop production and livestock production use data of internet technologies, Global Positioning Satellite survey and observations, mashine and tractor aggregates automated operating. The models nucleus and row of information models of agricultural objects were designed on the basis of information streams systematization. The analysis of results of simulation of biological objects, cenosises, ecosystems, agro cenosises and agroecosystems showed that the most acceptable type of model is the systemically determined dynamic model of potentially effective type. The Internet-oriented database of innovative development of institutes of an agrarian profile is designed. It contains the information about sorts, machines, mechanization means, electrification and technologies in crop production, livestock production, forage production, feed processing, crop protection, biotechnologies, mechanization, veterinary science and agricultural production processing. The database is positioned as the subject-oriented, retrieval database in web space. The list of indices to which the created architecture of the database corresponds is defined. More than 20 various databases of agricultural purpose which are used in educational process and production are created. These databases are useful to agricultural producers and also organizers of agricultural production, scientists, teachers and students. Information on key indicators of innovative products and institutes – developers of innovative solutions is provided in a basis.

  7. Resource sharing in libraries concepts, products, technologies, and trends

    CERN Document Server

    Breeding, Marshall

    2014-01-01

    Supplementing your local collection through resource sharing is a smart way to ensure your library has the resources to satisfy the needs of your users. Marshall Breeding's new Library Technology Report explores technologies and strategies for sharing resources, helping you streamline workflows and improve resource-sharing services by covering key strategies like interlibrary loan, consortial borrowing, document delivery, and shared collections. You'll also learn about such trends and services as:OCLC WorldCat Resource Sharing, and other systems that facilitate cooperative, reciprocal lendingS

  8. Improvements in process technology for uranium metal production

    International Nuclear Information System (INIS)

    Meghal, A.M.; Singh, H.; Koppiker, K.S.

    1991-01-01

    The research reactors in Trombay use uranium metal as a fuel. The plant to produce nuclear grade uranium metal ingots has been in operation at Trombay since 1959. Recently, the capacity of the plant has been expanded to meet the additional demand of the uranium metal. The operation of the expanded plant, has brought to the surface various shortcomings. This paper identifies various problems and describes the measures to be taken to upgrade the technology. Some comments are made on the necessity for development of technology for future requirement. (author). 6 refs., 1 fig

  9. An integrated production-inventory model for the singlevendor two-buyer problem with partial backorder, stochastic demand, and service level constraints

    Science.gov (United States)

    Arfawi Kurdhi, Nughthoh; Adi Diwiryo, Toray; Sutanto

    2016-02-01

    This paper presents an integrated single-vendor two-buyer production-inventory model with stochastic demand and service level constraints. Shortage is permitted in the model, and partial backordered partial lost sale. The lead time demand is assumed follows a normal distribution and the lead time can be reduced by adding crashing cost. The lead time and ordering cost reductions are interdependent with logaritmic function relationship. A service level constraint policy corresponding to each buyer is considered in the model in order to limit the level of inventory shortages. The purpose of this research is to minimize joint total cost inventory model by finding the optimal order quantity, safety stock, lead time, and the number of lots delivered in one production run. The optimal production-inventory policy gained by the Lagrange method is shaped to account for the service level restrictions. Finally, a numerical example and effects of the key parameters are performed to illustrate the results of the proposed model.

  10. Roles Prioritization of Hydrogen Production Technologies for Promoting Hydrogen Economy in the Current State of China

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Gao, Suzhao; Tan, Shiyu

    2015-01-01

    Hydrogen production technologies play an important role in the hydrogen economy of China. However, the roles of different technologies played in promoting the development of hydrogen economy are different. The role prioritization of various hydrogen production technologies is of vital importance...... information. The prioritization results by using the proposed method demonstrated that the technologies of coal gasification with CO2 capture and storage and hydropower-based water electrolysis were regarded as the two most important hydrogen production pathways for promoting the development of hydrogen...... for the stakeholders/decision-makers to plan the development of hydrogen economy in China and to allocate the finite R&D budget reasonably. In this study, DPSIR framework was firstly used to identify the key factors concerning the priorities of various hydrogen production technologies; then, a fuzzy group decision...

  11. Production technology of 131I-rose bengal

    International Nuclear Information System (INIS)

    Hradilek, P.; Miklik, M.; Kopicka, K.; Kronrad, L.

    1983-01-01

    A detailed description is presented of the production equipment and production process used for Rose Bengal labelled with 131 I designed for use in nuclear medicine. The apparatus was installed in the semi-hot cell laboratory of the Nuclear Research Institute at Rez. The processed activity is around 20 GBq, the average yield of the ion exchange reaction between non-radioactive Rose Bengal and 131 I-labelled sodium iodide is 90%. The unreacted active sodium iodide is separated and the resulting product is diluted and processed into a drug presentation, sterilized and after random control is distributed in 14 days intervals to medical workplaces. (M.D.)

  12. Technology transfers, foreign investment and productivity spillovers: evidence from Vietnam

    DEFF Research Database (Denmark)

    Newman, Carol; Rand, John; Talbot, Theodore Purdendu

    FDI through vertical linkages along the supply chain. Our results suggest that domestic firms experience more productivity spillovers through forward linkages from foreign-input suppliers to domestic input users than through backward linkages from foreign customers to domestic producers of inputs......This paper provides new evidence on the relationship between foreign direct investment (FDI) and the productivity of domestic firms. Using a specially designed survey on a sample of over 7,500 manufacturing firms in Vietnam we uncover some of the mechanisms that explain productivity spillovers from...

  13. Building a Trusted Environment for Education Technology Products

    Science.gov (United States)

    Levin, Douglas

    2016-01-01

    Data about learning, about teaching and about school operations helps to generate information that can and is being used to benefit students. This, in fact, is one of the key advances powering the dynamic movement to use technology in schools to support student learning. At the same time, not all parents and privacy advocates are equally…

  14. Engineering Workflow: The Process in Product Data Technology

    NARCIS (Netherlands)

    Bijwaard, D.; Spee, J.B.R.M.; de Boer, Pieter-Tjerk

    The prevailing paradigm for enterprises in the new decade is undoubtedly speed. This enterprise view is driven by the availability of e-business technology that enables new forms of collaboration between companies. The rapid developments in e-business also have an impact on the future of engineering

  15. Technology use in sweet potato production, consumption and ...

    African Journals Online (AJOL)

    It was concluded that technologies that are user friendly be developed by research institutes and passed on to state Agricultural Development Programmes (ADPS) for on ward transmission to end-users. The women-in-Agriculture Programme (WIA) of the state level ADPS are strongly recommended to facilitate promotion of ...

  16. TECHNOLOGY TRANSFER NETWORKS ON PAPAYA PRODUCTION WITH TRANSITIONAL GROWERS

    Directory of Open Access Journals (Sweden)

    Octavio Cano-Reyes

    2012-11-01

    Full Text Available Social networks analysis applied to rural innovation processes becomes a very useful technology transfer tool, since it helps to understand the complexity of social relationships among people and/or institutions in their environment, and it also defines those innovation networks given in specific working groups or regions. This study was conducted from April to May 2011 to determine those networks and key players present in the group of growers associated as “Productora y Comercializadora de Papaya de Cotaxtla S.P.R. de R.L.”, that influence the technology transfer process in Cotaxtla, Veracruz, Mexico. Data were analyzed using UCINET 6 software. Three centrality measures were obtained: range, degree of mediation and closeness. Of 32 network players, 27 actively diffuse innovations according to their interests; alliances must be established with them to transfer technology. Four growers stand out as central actors, which along with the Instituto Nacional de Investigaciones Forestales Agricolas y Pecuarias, the Colegio de Postgraduados and the growers’ organization itself, could be the most appropriate actors to establish a technology transfer program to accelerate the diffusion and adoption of innovations. Wholesalers, middlemen and credit institutions do not participate in this process, but having capital they could be incorporated in the innovation diffusion process.

  17. A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

    Directory of Open Access Journals (Sweden)

    Alan Peslak

    2004-05-01

    Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

  18. Technology versus Agro-Ecology in Designing Vegetable Production Systems in the Netherlands

    NARCIS (Netherlands)

    Haan, de J.J.; Sukkel, W.; Stilma, E.S.C.

    2010-01-01

    Current open field vegetable production systems in the Netherlands do not meet market and societal demands. These demands could not be fulfilled by adapting current production systems. Other kinds of production systems are needed and therefore two types of systems are designed by 1) a technological

  19. Analysing Production Technology and Risk in Organic and Conventional Dutch Arable Farming using Panel Data

    NARCIS (Netherlands)

    Gardebroek, C.; Chavez Clemente, M.D.; Oude Lansink, A.G.J.M.

    2010-01-01

    Abstract This paper compares the production technology and production risk of organic and conventional arable farms in the Netherlands. Just–Pope production functions that explicitly account for output variability are estimated using panel data of Dutch organic and conventional farms. Prior

  20. Microreactor Technology for On-Site Production of Methyl Chloride

    Czech Academy of Sciences Publication Activity Database

    Schmidt, S.A.; Vajglová, Zuzana; Eränen, K.; Murzin, D.Y.; Salmi, T.

    2014-01-01

    Roč. 3, č. 5 (2014), s. 345-352 ISSN 2191-9542 Institutional support: RVO:67985858 Keywords : chloromethane * intensification * microreactor * product separation Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.125, year: 2014

  1. Resource-saving policy in the context of technological updating of ferroalloy production

    Directory of Open Access Journals (Sweden)

    Yelena Anatolyevna Pozdnyakova

    2011-06-01

    Full Text Available This paper substantiates the need for technological modernization of ferroalloy production which should be based on energy- and resource-saving technologies. Lean-technology is considered as a tool for effective management of material costs organization. A search algorithm for ways to improve the manufacturing process of a company, with which usage the author suggests a number of areas that require optimization, was developed. Measures aimed at solving the problems of resource-saving at JSC "Klyuchevsky Ferroalloy Plant" were proposed: introduction of resource saving technologies, suggesting involvement in the production of non-liquid products and the use of process waste and upgrading of individual processes. As a result of the proposed activities, tangible results have been achieved: reducing production costs, saving raw materials, reducing storage costs and release of additional areas, decrease of production losses.

  2. Renewable energy technologies: enlargement of biofuels list and co-products from microalgae

    Directory of Open Access Journals (Sweden)

    Chernova Nadezhda I.

    2017-01-01

    Full Text Available Microalgae is a perspective feedstock for producing a wide variety of biofuels and co-products with high added value. An alternative to the traditional technology of biodiesel from algae by the transesterification is the technology of hydrothermal liquefaction (HTL. The article presents the results of promising strains screening and directed cultivation of microalgae for the processing by means of variety of technologies and production of valuable co-products. An algorithm for selecting suitable areas for industrial plantations of algae is presented.

  3. The Role of the Technology Supplier in the Politics of Production

    DEFF Research Database (Denmark)

    Koch, Christian

    1996-01-01

    from a multitude of positions outside the factory. This includes the impacts through formation of subjectivity, labour market, social security, the origin of rawmateriel, ie.the production chains, and the technology used in the factory. On the basis of a Danish study the role of the technology supplier......This paper examines the relations between the technology supplier and the customer factory as an element of the politics of production. It is initially argued that labour process theory cannot limit itself to the analysis of individual enterprises. The politics in production is actually impacted...

  4. Elaboration of the technology of forming a conical product of sheet metal

    Directory of Open Access Journals (Sweden)

    W. Matysiak

    2010-01-01

    Full Text Available The work presents a general knowledge about spinning draw pieces of sheets, one of multi-operational processes of spinning a sheet metal conical product without machining. The objective of the work was to elaborate both the technology of forming conical products of sheet metal and execution of technological tests as well as to determine the technological parameters for the process of spinning a conical insert. As a result of the investigations, the products with improved mechanical properties, stricter execution tolerance and low roughness have been obtained. The series of 200 prototype conical inserts for the shipbuilding industry have been made.

  5. Partial Cancellation

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Partial Cancellation. Full Cancellation is desirable. But complexity requirements are enormous. 4000 tones, 100 Users billions of flops !!! Main Idea: Challenge: To determine which cross-talker to cancel on what “tone” for a given victim. Constraint: Total complexity is ...

  6. RAFT technology for the production of advanced photoresist polymers

    Science.gov (United States)

    Sheehan, Michael T.; Farnham, William B.; Okazaki, Hiroshi; Sounik, James R.; Clark, George

    2008-03-01

    Reversible Addition Fragmentation Chain Transfer (RAFT) technology has been developed for use in producing high yield low polydispersity (PD) polymers for many applications. RAFT technology is being used to produce low PD polymers and to allow control of the polymer architecture. A variety of polymers are being synthesized for use in advanced photoresists using this technique. By varying the RAFT reagent used we can modulate the system reactivity of the RAFT reagent and optimize it for use in acrylate or methacrylate monomer systems (193 and 193i photoresist polymers) or for use in styrenic monomer systems (248 nm photoresist polymers) to achieve PD as low as 1.05. RAFT polymerization technology also allows us to produce block copolymers using a wide variety of monomers. These block copolymers have been shown to be useful in self assembly polymer applications to produce unique and very small feature sizes. The mutual compatibilities of all the components within a single layer 193 photoresist are very important in order to achieve low LWR and low defect count. The advent of immersion imaging demands an additional element of protection at the solid/liquid interface. We have used RAFT technology to produce block copolymers comprising a random "resist" block with composition and size based on conventional dry photoresist materials, and a "low surface energy" block for use in 193i lithography. The relative block lengths and compositions may be varied to tune solution behavior, surface energy, contact angles, and solubility in developer. The use of this technique will be explored to produce polymers used in hydrophobic single layer resists as well as additives compatible with the main photoresist polymer.

  7. Increasing productivity by improved arc and beam welding technologies

    International Nuclear Information System (INIS)

    Dilthey, Ulrich; Stein, Lars

    2005-01-01

    In the early sixties, GMA welding methods were introduced into industrial manufacturing and they have been consequently developed further ever since. Recent advances do not only refer to power-source technology but also improved wire feed systems and new consumables such as filler materials and shielding gases. Great efforts have been made to increase deposition rates, and with this efficiency and welding speeds, by extending the frontiers of known processes and by developing new ones

  8. Blending technology and teamwork for successful management of product recalls.

    Science.gov (United States)

    Frush, Karen; Pleasants, Jane; Shulby, Gail; Hendrix, Barbara; Berson, Brooke; Gordon, Cynthia; Cuffe, Michael S

    2009-12-01

    Patient safety programs have been developed in many hospitals to reduce the risk of harm to patients. Proactive, real-time, and retrospective risk-reduction strategies should be implemented in hospitals, but patient safety leaders should also be cognizant of the risks associated with thousands of products that enter the hospital through the supply chain. A growing number of recalls and alerts related to these products are received by health care facilities each year, through a recall process that is fraught with challenges. Despite the best efforts of health care providers, weaknesses and gaps in the process lead to delays, fragmentation, and disruptions, thus extending the number of days patients may be at risk from potentially faulty or misused products. To address these concerns, Duke Medicine, which comprises an academic medical center, two community hospitals, outlying clinics, physicians' offices, and home health and hospice, implemented a Web-based recall management system. Within three months, the time required to receive, deliver, and close alerts decreased from 43 days to 2.74 days. To maximize the effectiveness of the recall management process, a team of senior Duke Medicine leaders was established to evaluate the impact of product recalls and alerts on patient safety, to evaluate response action plans, and to provide oversight of patient and provider communication strategies. Alerts are now communicated more effectively and responded to in a more consistent and global manner. This comprehensive approach to product recalls is a critical component of a broader Duke Medicine strategy to improve patient safety.

  9. Production and partial characterization of serine and metallo peptidases secreted by Aspergillus fumigatus Fresenius in submerged and solid state fermentation.

    Science.gov (United States)

    da Silva, Ronivaldo Rodrigues; de Freitas Cabral, Tatiana Pereira; Rodrigues, André; Cabral, Hamilton

    2013-01-01

    Enzyme production varies in different fermentation systems. Enzyme expression in different fermentation systems yields important information for improving our understanding of enzymatic production induction. Comparative studies between solid-state fermentation (SSF) using agro-industrial waste wheat bran and submerged fermentation (SmF) using synthetic media were carried out to determinate the best parameters for peptidase production by the fungus Aspergillus fumigatus Fresen. Variables tested include: the concentration of carbon and protein nitrogen sources, the size of the inoculum, the pH of the media, temperature, and the length of the fermentation process. The best peptidase production during SSF was obtained after 96 hours using wheat bran at 30 °C with an inoculum of 1 × 10(6) spores and yielded 1500 active units (U/mL). The best peptidase production using SmF was obtained after periods of 72 and 96 hours of fermentation in media containing 0.5% and 0.25% of casein, respectively, at a pH of 6.0 and at 30 °C and yielded 40 U/mL. We also found examples of catabolite repression of peptidase production under SmF conditions. Biochemical characterization of the peptidases produced by both fermentative processes showed optimum activity at pH 8.0 and 50 °C, and also showed that their proteolytic activity is modulated by surfactants. The enzymatic inhibition profile using phenylmethylsulfonyl fluoride (PMSF) in SmF and SSF indicated that both fermentative processes produced a serine peptidase. Additionally, the inhibitory effect of the ethylene-diaminetetraacetic acid (EDTA) chelating agent on the peptidase produced by SmF indicated that this fermentative process also produced a metallopeptidase.

  10. Natural radionuclide distribution in phosphate fertilizer and superphosphate production technology

    Energy Technology Data Exchange (ETDEWEB)

    Lisachenko, Eh P; Ponikarova, T M; Lisitsyna, Yu Z

    1987-01-01

    The obtained data on the natural radionuclide distribution by phosphate fertilizer and superphosphate production process stages testify to phosphate fertilizer enrichment 2-4 times in relation to initial ore, depending in the raw material used. In this case uranium and thorium series element concentration value (in equilibrium with their decomposition products), proposed as a regulating one in phosphorus-containing fertilizers, is not achieved. However, the fact of lurichment as it is and the enrichment factor, stated in the course of the work, should be taken into account for evaluation of phosphorite new deposit raw material with higher concentrations of natural radionuclides. Natural radionuclide separation in the enrichment process and superphosphate production is not revealed.

  11. Additive Manufacturing and Casting Technology Comparison: Mechanical Properties, Productivity and Cost Benchmark

    Science.gov (United States)

    Vevers, A.; Kromanis, A.; Gerins, E.; Ozolins, J.

    2018-04-01

    The casting technology is one of the oldest production technologies in the world but in the recent years metal additive manufacturing also known as metal 3D printing has been evolving with huge steps. Both technologies have capabilities to produce parts with internal holes and at first glance surface roughness is similar for both technologies, which means that for precise dimensions parts have to be machined in places where precise fit is necessary. Benchmark tests have been made to find out if parts which are produced with metal additive manufacturing can be used to replace parts which are produced with casting technology. Most of the comparative tests have been made with GJS-400-15 grade which is one of the most popular cast iron grades. To compare mechanical properties samples have been produced using additive manufacturing and tested for tensile strength, hardness, surface roughness and microstructure and then the results have been compared with the samples produced with casting technology. In addition, both technologies have been compared in terms of the production time and production costs to see if additive manufacturing is competitive with the casting technology. The original paper has been written in the Latvian language as part of the Master Thesis within the framework of the production technology study programme at Riga Technical University.

  12. Biofuels Fuels Technology Pathway Options for Advanced Drop-in Biofuels Production

    Energy Technology Data Exchange (ETDEWEB)

    Kevin L Kenney

    2011-09-01

    Advanced drop-in hydrocarbon biofuels require biofuel alternatives for refinery products other than gasoline. Candidate biofuels must have performance characteristics equivalent to conventional petroleum-based fuels. The technology pathways for biofuel alternatives also must be plausible, sustainable (e.g., positive energy balance, environmentally benign, etc.), and demonstrate a reasonable pathway to economic viability and end-user affordability. Viable biofuels technology pathways must address feedstock production and environmental issues through to the fuel or chemical end products. Potential end products include compatible replacement fuel products (e.g., gasoline, diesel, and JP8 and JP5 jet fuel) and other petroleum products or chemicals typically produced from a barrel of crude. Considering the complexity and technology diversity of a complete biofuels supply chain, no single entity or technology provider is capable of addressing in depth all aspects of any given pathway; however, all the necessary expert entities exist. As such, we propose the assembly of a team capable of conducting an in-depth technology pathway options analysis (including sustainability indicators and complete LCA) to identify and define the domestic biofuel pathways for a Green Fleet. This team is not only capable of conducting in-depth analyses on technology pathways, but collectively they are able to trouble shoot and/or engineer solutions that would give industrial technology providers the highest potential for success. Such a team would provide the greatest possible down-side protection for high-risk advanced drop-in biofuels procurement(s).

  13. Enterohemorrhagic Escherichia coli O157 in milk and dairy products from Libya: Isolation and molecular identification by partial sequencing of 16S rDNA

    Directory of Open Access Journals (Sweden)

    Aboubaker M. Garbaj

    2016-11-01

    Full Text Available Aim: The aim of this work was to isolate and molecularly identify enterohemorrhagic Escherichia coli (EHEC O157 in milk and dairy products in Libya, in addition; to clear the accuracy of cultural and biochemical identification as compared with molecular identification by partial sequencing of 16S rDNA for the existing isolates. Materials and Methods: A total of 108 samples of raw milk (cow, she-camel, and goat and locally made dairy products (fermented cow’s milk, Maasora, Ricotta and ice cream were collected from some regions (Janzour, Tripoli, Kremiya, Tajoura and Tobruk in Libya. Samples were subjected to microbiological analysis for isolation of E. coli that was detected by conventional cultural and molecular method using polymerase chain reaction and partial sequencing of 16S rDNA. Results: Out of 108 samples, only 27 isolates were found to be EHEC O157 based on their cultural characteristics (Tellurite-Cefixime-Sorbitol MacConkey that include 3 isolates from cow’s milk (11%, 3 isolates from she-camel’s milk (11%, two isolates from goat’s milk (7.4% and 7 isolates from fermented raw milk samples (26%, isolates from fresh locally made soft cheeses (Maasora and Ricotta were 9 (33% and 3 (11%, respectively, while none of the ice cream samples revealed any growth. However, out of these 27 isolates, only 11 were confirmed to be E. coli by partial sequencing of 16S rDNA and E. coli O157 Latex agglutination test. Phylogenetic analysis revealed that majority of local E. coli isolates were related to E. coli O157:H7 FRIK944 strain. Conclusion: These results can be used for further studies on EHEC O157 as an emerging foodborne pathogen and its role in human infection in Libya.

  14. Frugal Innovations in Technological and Institutional Infrastructure : Impact of Mobile Phone Technology on Productivity, Public Service Provision and Inclusiveness

    NARCIS (Netherlands)

    Altamirano, Monica A.; van Beers, C.P.

    2017-01-01

    This paper examines frugal innovations as processes, products and systems that affect the resource constraints that are typical for many developing countries. The focus is on the impacts of mobile phone technology-induced frugal innovations’ on the resource constraints and how these influence

  15. Ethanol production from biomass: technology and commercialisation status

    Energy Technology Data Exchange (ETDEWEB)

    Mielenz, J.R.

    2001-06-01

    Owing to technical improvements in the processes used to produce ethanol from biomass, construction of at least two waste-to-ethanol production plants in the United States is expected to start this year. Although there are a number of robust fermentation microorganisms available, initial pretreatment of the biomass and costly cellulase enzymes remain critical targets for process and cost improvements. A highly efficient, very low-acid pretreatment process is approaching pilot testing, while research on cellulases for ethanol production is expanding at both enzyme and organism level. (Author)

  16. Make-or-Buy Desicions on Technology-Intensive Products

    DEFF Research Database (Denmark)

    Brem, Alexander; Elsner, Robert

    2018-01-01

    . The results show two kinds of make-or-buy decisions, called type 1 and type 2. In contrast to type 1 make-or-buy decisions whose scope is mostly limited to the production and quality function, type 2 decisions are strongly linked to engineering and R&D activities. Moreover, two new decision matrices...... are introduced: a ‘product/subsystem aggregation’ scheme and a ‘make-or-buy controlling’ matrix. In an environment in which companies move towards greater use of outsourcing, the framework ensures that company strategy and core competencies are followed in the long run despite short-range deviations of make...

  17. Production and partial characterization of arabinoxylan-degrading enzymes by Penicillium brasilianum under solid-state fermentation

    DEFF Research Database (Denmark)

    Panagiotou, Gianni; Granouillet, P.; Olsson, Lisbeth

    2006-01-01

    The production of a battery of arabinoxylan-degrading enzymes by the fungus Penicillium brasilianum grown on brewer's spent grain (BSG) under solid-state fermentation was investigated. Initial moisture content, initial pH, temperature, and nitrogen source content were optimized to achieve maximum...

  18. 76 FR 4291 - Corrosion-Resistant Carbon Steel Flat Products From the Republic of Korea: Partial Rescission of...

    Science.gov (United States)

    2011-01-25

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-580-818] Corrosion-Resistant Carbon... Commerce (the Department) initiated an administrative review of the countervailing duty order on corrosion- resistant carbon steel flat products from the Republic of Korea covering the period January 1, 2009, through...

  19. Production and Partial Characterization of Cellulases from Trichoderma sp. IS-05 Isolated from Sandy Coastal Plains of Northeast Brazil

    Directory of Open Access Journals (Sweden)

    Jackeline Pereira Andrade

    2011-01-01

    Full Text Available This study evaluated the production of cellulolytic enzymes by Trichoderma sp. IS-05 strain, isolated from sand dunes, according to its ability to grow on cellulose as carbon source. Wheat bran was tested as the carbon source and peptone tested as the nitrogen source. Different concentrations of carbon and nitrogen were tested using a factorial design to identify optimal cellulase activity production. The results showed that media containing wheat bran 4.0% (w/v and peptone 0.25% (w/v lead to the highest production, 564.0 U L−1 of cellulase, obtained after 2 days of fermentation. The pH and temperature profile showed optimal activity at pH 3.0 and 60∘C. As for thermostability, the cellulase was most tolerant at 60∘C, retaining more than 59.6% of maximal activity even after 4 hours of incubation. The combination of acid pH, high temperature tolerance, and production of cellulase from agro-industrial residues by Trichoderma sp. IS-05 offers possibilities condition for the biomass hydrolysis process to produce bioethanol.

  20. Partial Optimization of Endo-1, 4-Β-Xylanase Production by Aureobasidium pullulansUsing Agro-Industrial Residues

    Directory of Open Access Journals (Sweden)

    Shaghayegh Nasr

    2013-12-01

    This finding indicates the feasibility of growing of A. pullulans strain SN090 on wheat bran as an alternate economical substrate in order for reducing the costs of enzyme production and using this fortified agro-industrial byproduct in formulation of animal feed.