MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

[Study on the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group].

Science.gov (United States)

Yang, Xin-Wei; Wang, Zhi-Ming; Jin, Tai-Yi; Lan, Ya-Jia

2006-09-01

A study of the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets (36 marketing group, 331 public service/safety group, 903 production laborer group). Descriptive statistics for OSI-R scale scores for the marketing group, public service/safety group and production laborer group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for marketing group public service/safety group and production laborer group were established. OSI-R profile from for marketing group, public service/safety group and production laborer group were established. For the ORQ and PSQ scales, scores at or above 70 indicate a strong levels of maladaptive stress and strain. Score in the range of 60 to 69 suggest middle levels of maladaptive stress and strain. Score in the range of 40 to 59 indicate normal levels of stress and strain. Score below 40 indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30 indicate a significant lack of coping resources. Score in the range of 30 to 39 suggest middle deficits in coping resources. Score in the range of 40 to 59 indicate average coping resources. Scores at or above 60 indicate a strong levels of coping resources. The authors combined subjective and objective environment match model of occupational stress. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

Whole-milk feeding duration, calf growth, and profitability of group-fed calves in an organic production system.

Science.gov (United States)

Bjorklund, E A; Heins, B J; Chester-Jones, H

2013-01-01

The objective of this study was to evaluate the effect of early-life feeding duration on growth and economics of group-fed organic dairy calves. Heifer calves born during the spring of 2011 (n = 67) and the spring of 2012 (n = 57) were used to evaluate the effect of weaning age, growth, and profitability of group-fed calves fed once per day in an organic dairy production system. Calves were assigned to replicate feeding groups of 10 in super hutches by birth order, and were born at the University of Minnesota West Central Research and Outreach Center, Morris organic dairy. Breed groups were Holsteins (n = 15) selected for high production, Holsteins (n = 23) maintained at 1964 breed-average level, crossbreds (n = 54) including combinations of Holstein, Montbéliarde, and Swedish Red, and crossbreds (n = 32) including combinations of Holstein, New Zealand Friesian, Jersey, and Swedish Red. Groups of calves were weaned at 30 (EW, early weaning), 60 (MW, mid weaning), or 90 (LW, late weaning) d of age, and groups were fed 1.5% of birth weight of 13% total solids organic whole milk once daily and weaned when the group of 10 calves consumed an average of 0.91 kg of organic calf starter per calf per day for 4 consecutive days. Body measurements were recorded at birth, weekly during the preweaning period, at weaning, and monthly thereafter. Profitability was estimated as a function of the total cost for organic milk and organic calf starter for weaning groups to weaning and to the first 90 d of age. Preweaning group performance was weaning age, EW: 47.6d, MW: 64.5d, LW: 93.7d; weaning weight, EW: 61.8 kg, MW: 79.2 kg, LW: 108.1 kg; and gain per day, EW: 0.51 kg/d, MW: 0.63 kg/d, LW: 0.75 kg/d. Body weight (BW) did not differ among weaning groups at 90 d of age; however, MW calves had lower 120-d BW than did LW calves. The EW calves did not differ from either MW or LW calves for 120-d BW. Total feed costs to weaning for groups were $1,092.97 for EW calves, $1,871.24 for MW

Adoption of Web-based Group Decision Support Systems: Conditions for Growth

NARCIS (Netherlands)

van Hillegersberg, Jos; Koenen, Sebastiaan

2014-01-01

While organizations have massively adopted enterprise information systems to support business processes, business meetings in which key decisions are made about products, services and processes are usually held without much support of information systems. This is remarkable as group decision support

Factors affecting research productivity of production and operations management groups: An empirical study

OpenAIRE

George C. Hadjinicola; Andreas C. Soteriou

2006-01-01

This paper identifies factors that promote research productivity of production and operations management (POM) groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as ...

Implementation of Reconfigurable Manufacturing Systems, the Case of The LEGO Group

DEFF Research Database (Denmark)

Wang, Ying; Bilberg, Arne; Hadar, Ronen

of reconfigurable manufacturing systems (RMS). A literature review is made to describe the advantages and core characteristics of RMS. Based on the theory, a conceptual model is developed to analyze where RMS would be most suitable and have most benefits in The LEGO Group. Finally, the conclusion is drawn based...... on the analysis through the model. Keywords: Reconfigurable Manufacturing Systems, Conceptual Model of RMS, Production of The LEGO Group...

Two dimentional lattice vibrations from direct product representations of symmetry groups

Directory of Open Access Journals (Sweden)

J. N. Boyd

1983-01-01

two dimensional crystals. First, the Born cyclic condition is applied to a double chain composed of coupled linear lattices to obtain a cylindrical arrangement. Then the quadratic Lagrangian function for the system is written in matrix notation. The Lagrangian is diagonalized to yield the natural frequencies of the system. The transformation to achieve the diagonalization was obtained from group theorectic considerations. Next, the techniques developed for the double chain are applied to a square lattice. The square lattice is transformed into the toroidal Ising model. The direct product nature of the symmetry group of the torus reveals the transformation to diagonalize the Lagrangian for the Ising model, and the natural frequencies for the principal directions in the model are obtained in closed form.

Interagency mechanical operations group numerical systems group

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.

From Product to System Approaches in European Sustainable Product Policies: Analysis of the Package Concept of Heating Systems in Buildings

Directory of Open Access Journals (Sweden)

Maria Calero-Pastor

2017-09-01

Full Text Available Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive.

Task management in the new ATLAS production system

International Nuclear Information System (INIS)

De, K; Golubkov, D; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

SIMULTANEOUS PRODUCTIVE GROWTH GROUPS (SPGG: INNOVATION ON PAPAYA MITE MANAGEMENT

Directory of Open Access Journals (Sweden)

Marycruz Abato-Zárate

2011-11-01

Full Text Available Grower’s previous experience and their ability to communicate technical information to other growers, allows greater adoption of technologies. Thus, appropriation of technologies of mite management and sampling was evaluated, based on the “Simultaneous Productive Growth Groups (SPGG” technology transfer model. A preliminary diagnosis was made, evaluating the technology transfer achieved by six leading growers showing up continuously to seven meetings carried out from March to July 2010, and also by 19 growers showing up on a more irregular basis. All growers were from the municipality of Cotaxtla and belonged to the Papaya-Product-System of Veracruz, Mexico. Participation, attitude and efficacy of training were evaluated with a survey. Forty-two percent of growers considered the papaya ring spot virus as the main problem and 48 % revealed spider mites as the second one; 96 % used pesticides on spider mites. Participation of the SPGG basic group was 71 %, who agreed on sampling, recording data in sampling forms and using selective acaricides. Seventy percent were able to recognize spider mites from predatory mites and 83 % recognized selective acaricides. Growers considered that sampling can help reduce control costs. The SPGG model allowed building collective knowledge and better decision making by the working group.

Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

Directory of Open Access Journals (Sweden)

Akhmad Sodiq

2009-09-01

Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

Maintenance grouping strategy for multi-component systems with dynamic contexts

International Nuclear Information System (INIS)

Vu, Hai Canh; Do, Phuc; Barros, Anne; Bérenguer, Christophe

2014-01-01

This paper presents a dynamic maintenance grouping strategy for multi-component systems with both “positive” and “negative” economic dependencies. Positive dependencies are commonly due to setup cost whereas negative dependencies are related to shutdown cost. Actually, grouping maintenance activities can save part of the setup cost, but can also in the same time increase the shutdown cost. Until now, both types of dependencies have been jointly taken into account only for simple system structures as pure series. The first aim of this paper is to investigate the case of systems with any combination of basic structures (series, parallel or k-out-of n structures). A cost model and a heuristic optimization scheme are proposed since the optimization of maintenance grouping strategy for such multi-component systems leads to a NP-complete problem. Then the second objective is to propose a finite horizon (dynamic) model in order to optimize online the maintenance strategy in the presence of dynamic contexts (change of the environment, the working condition, the production process, etc). A numerical example of a 16-component system is finally introduced to illustrate the use and the advantages of the proposed approach in the maintenance optimization framework. - Highlights: • A dynamic grouping maintenance strategy for complex structure systems is proposed. • Impacts of the system structure on grouping maintenance are investigated. • A grouping approach based on the rolling horizon and GA algorithm is proposed. • Different dynamic contexts and their impacts on grouping maintenance are studied. • The proposed approach can help to update the maintenance planning in dynamic contexts

KMS states on Nica-Toeplitz algebras of product systems

DEFF Research Database (Denmark)

Hong, Jeong Hee; Larsen, Nadia S.; Szymanski, Wojciech

2012-01-01

We investigate KMS states of Fowler's Nica-Toeplitz algebra NT(X) associated to a compactly aligned product system X over a semigroup P of Hilbert bimodules. This analysis relies on restrictions of these states to the core algebra which satisfy appropriate scaling conditions. The concept of product...... system of finite type is introduced. If (G, P) is a lattice ordered group and X is a product system of finite type over P satisfying certain coherence properties, we construct KMS_beta states of NT(X) associated to a scalar dynamics from traces on the coefficient algebra of the product system. Our...... results were motivated by, and generalize some of the results of Laca and Raeburn obtained for the Toeplitz algebra of the affine semigroup over the natural numbers....

GROUP TECHNOLOGY IN CONTEXT OF THE PRODUCT CLASSIFICATION

Directory of Open Access Journals (Sweden)

Lenka Debnárová

2014-03-01

Full Text Available In the intensive competitive environment of the global economy, the survival of even the most well-established the world manufacturers depends on the ability to improve continuously quality while reducing costs. The resulting higher productivity is the key to market leadership and gaining sustainable competitive advantage. This paper outlines a group technology and classification of products which improve productivity, quality, inventory management of a company and reduce production times.

Energy Production System Management - Renewable energy power supply integration with Building Automation System

International Nuclear Information System (INIS)

Figueiredo, Joao; Martins, Joao

2010-01-01

Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the 'heart and soul' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems.

Different approaches to overcome uncertainties of production systems

Science.gov (United States)

Azizi, Amir; Sorooshian, Shahryar

2015-05-01

This study presented a comprehensive review on the understanding of uncertainty and the current approaches that have been proposed to handle the uncertainties in the production systems. This paper classified proposed approaches into 11 groups. The paper studied 114 scholarly papers through various international journals. The paper added the latest findings to the body of knowledge to the current reservoir of understanding of the production uncertainties. Thus, the paper prepared the needs of researchers and practitioners for easy references in this area. This review also provided an excellent source to continue further studies on how to deal with the uncertainties of production system.

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2013-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Flexibility of production systems and prepare-finish time

Directory of Open Access Journals (Sweden)

Vukićević Milan R.

2006-01-01

Full Text Available One of the specificities of the large-serial and mass production is the almost neglected percentage of prepare-finish time in the production cycle. In the conditions of today dominant discontinuous production, it becomes a significant element of the production cycle. The eastern (Japan doctrine of increasing the flexibility of the production systems, is based inter alia also on the extreme reduction of the prepare-finish time. For this reason, the aim of this study was to identify the types and percentages of individual jobs within the group of prepare-finish jobs. The sample consisted of 3 (three production systems for the production of joinery, with the discontinuous production system. The research shows that the percentage of time of the jobs installation of work instruments, regulation of processing regime, and removal of work instruments is extremely long and that it ranges between 11.83% and 18.93% of the shift time. The reasons of the high percentage of these jobs are the wide range of products and the absence of the rationalisation of prepare-finish jobs. Within the efforts to minimize the effects of disruption and to increase the flexibility of the production systems, the rationalisation of prepare-finish jobs is the unavoidable condition.

Fission product release mechanisms and groupings

International Nuclear Information System (INIS)

Iglesia, F.C.; Brito, A.C.; Liu, Y.

1995-01-01

During CANDU postulated accidents the reactor fuel is estimated to be exposed to a variety of conditions. These conditions are dynamic and, during the course of an accident, the fuel may experience a wide range of temperatures and conditions from highly oxidizing to mildly reducing environments. The exposure of the reactor fuel to these environments and temperatures may affect its stoichiometry and release performance. In this paper a review of the important fission product release mechanisms is presented, the results of three out-of-pile experimental programs are summarized, and fission product release groups, for both oxidizing and reducing conditions are proposed. (author)

Multidisciplinary approach to successful implementation of production information system (PRISM)

Energy Technology Data Exchange (ETDEWEB)

Shariff, M.R.; Gopalakrishnan, S.G.; Francis, N. [and others

1995-12-31

A company wide corporate and regional production database supporting all production areas was envisaged critical to the current expansion within Petronas Carigali Sdn Bhd (PCSB). A multi disciplinary project team was thus formed to analyze the requirements prior to developing, testing, implementing and training users. PCSB has currently evolved into a mature E & P company on par with other E & P companies within the region. This expansion necessitates a common Production Information System for the efficient dissemination of vital Production Information for Production Surveillance, Reservoir Management, Reserve Assessment, Special Studies and Standardized Group-wide Reporting. This paper will discuss all the phases involved in the project which includes Systems Requirement Study, Data Migration, System Development, System Implementation and Post-Implementation Plan.

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

The group of Hamiltonian automorphisms of a star product

OpenAIRE

La Fuente-Gravy, Laurent

2015-01-01

We deform the group of Hamiltonian diffeomorphisms into the group of Hamiltonian automorphisms of a formal star product on a symplectic manifold. We study the geometry of that group and deform the Flux morphism in the framework of deformation quantization.

Production of Modularised Product Systems

DEFF Research Database (Denmark)

Jacobsen, Peter

2004-01-01

but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

Fission product release mechanisms and groupings

Energy Technology Data Exchange (ETDEWEB)

Iglesia, F C; Brito, A C; Liu, Y [Ontario Hydro, Toronto, ON (Canada); and others

1996-12-31

During CANDU postulated accidents the reactor fuel is estimated to be exposed to a variety of conditions. These conditions are dynamic and, during the course of an accident, the fuel may experience a wide range of temperatures and conditions from highly oxidizing to mildly reducing environments. The exposure of the reactor fuel to these environments and temperatures may affect its stoichiometry and release performance. In this paper a review of the important fission product release mechanisms is presented, the results of three out-of-pile experimental programs are summarized, and fission product release groups, for both oxidizing and reducing conditions are proposed. (author) 92 refs., 6 tabs.

The Group of Hamiltonian Automorphisms of a Star Product

Energy Technology Data Exchange (ETDEWEB)

La Fuente-Gravy, Laurent, E-mail: lfuente@ulg.ac.be [Université de Liège, Département de Mathématique (Belgium)

2016-09-15

We deform the group of Hamiltonian diffeomorphisms into a group of Hamiltonian automorphisms, Ham(M,∗), of a formal star product ∗ on a symplectic manifold (M,ω). We study the geometry of that group and deform the Flux morphism in the framework of deformation quantization.

The Group of Hamiltonian Automorphisms of a Star Product

International Nuclear Information System (INIS)

La Fuente-Gravy, Laurent

2016-01-01

We deform the group of Hamiltonian diffeomorphisms into a group of Hamiltonian automorphisms, Ham(M,∗), of a formal star product ∗ on a symplectic manifold (M,ω). We study the geometry of that group and deform the Flux morphism in the framework of deformation quantization.

Consumers’ grouping of organic and conventional food products

DEFF Research Database (Denmark)

Denver, Sigrid; Christensen, Tove

2014-01-01

or not they were organic. These consumers were found to have significantly higher levels of confidence in the benefits of organic produce, to state significantly higher levels of organic consumption and higher willingness to pay for organoleptic attributes of fresh milk, than consumers who placed fruits in one......A detailed account of the way consumers choose to group different varieties of organic and conventional food produce might have practical implications in terms of improved space management in supermarkets and better targeted promotions of organic products. The results presented here were obtained...... in a case study using a web-based questionnaire and 849 Danish consumers. The consumers were asked to group the contents of a virtual basket of organic and non-organic fruits and vegetables into two smaller baskets. A significant share of the consumers grouped the food products according to whether...

A rugged landscape model for self-organization and emergent leadership in creative problem solving and production groups.

Science.gov (United States)

Guastello, Stephen J; Craven, Joanna; Zygowicz, Karen M; Bock, Benjamin R

2005-07-01

The process by which an initially leaderless group differentiates into one containing leadership and secondary role structures was examined using the swallowtail catastrophe model and principles of selforganization. The objectives were to identify the control variables in the process of leadership emergence in creative problem solving groups and production groups. In the first of two experiments, groups of university students (total N = 114) played a creative problem solving game. Participants later rated each other on leadership behavior, styles, and variables related to the process of conversation. A performance quality measure was included also. Control parameters in the swallowtail catastrophe model were identified through a combination of factor analysis and nonlinear regression. Leaders displayed a broad spectrum of behaviors in the general categories of Controlling the Conversation and Creativity in their role-play. In the second experiment, groups of university students (total N = 197) engaged in a laboratory work experiment that had a substantial production goal component. The same system of ratings and modeling strategy was used along with a work production measure. Leaders in the production task emerged to the extent that they exhibited control over both the creative and production aspects of the task, they could keep tension low, and the externally imposed production goals were realistic.

New Examples of Torsion-Free Non-unique Product Groups

OpenAIRE

Carter, William

2013-01-01

We give an infinite family of torsion-free groups that do not satisfy the unique product property. For these examples, we also show that each group contains arbitrarily large sets whose square has no uniquely represented element.

The Product Quality Research Institute (PQRI) Leachables and Extractables Working Group Initiatives for Parenteral and Ophthalmic Drug Product (PODP).

Science.gov (United States)

Paskiet, Diane; Jenke, Dennis; Ball, Douglas; Houston, Christopher; Norwood, Daniel L; Markovic, Ingrid

2013-01-01

The Product Quality Research Institute (PQRI) is a non-profit consortium of organizations working together to generate and share timely, relevant, and impactful information that advances drug product quality and development. The collaborative activities of PQRI participants have, in the case of orally inhaled and nasal drug products (OINDPs), resulted in comprehensive and widely-accepted recommendations for leachables assessments to help ensure patient safety with respect to this class of packaged drug products. These recommendations, which include scientifically justified safety thresholds for leachables, represent a significant milestone towards establishing standardized approaches for safety qualification of leachables in OINDP. To build on the success of the OINDP effort, PQRI's Parenteral and Ophthalmic Drug Products (PODP) Leachables and Extractables Working Group was formed to extrapolate the OINDP threshold concepts and best practice recommendations to other dosage forms with high concern for interaction with packaging/delivery systems. This article considers the general aspects of leachables and their safety assessment, introduces the PODP Work Plan and initial study Protocol, discusses the laboratory studies being conducted by the PODP Chemistry Team, outlines the strategy being developed by the PODP Toxicology Team for the safety qualification of PODP leachables, and considers the issues associated with application of the safety thresholds, particularly with respect to large-volume parenterals. Lastly, the unique leachables issues associated with biologics are described. The Product Quality Research Institute (PQRI) is a non-profit consortium involving industry organizations, academia, and regulatory agencies that together provide recommendations in support of regulatory guidance to advance drug product quality. The collaborative activities of the PQRI Orally Inhaled and Nasal Drug Products Leachables and Extractables Working Group resulted in a

Form gene clustering method about pan-ethnic-group products based on emotional semantic

Science.gov (United States)

Chen, Dengkai; Ding, Jingjing; Gao, Minzhuo; Ma, Danping; Liu, Donghui

2016-09-01

The use of pan-ethnic-group products form knowledge primarily depends on a designer's subjective experience without user participation. The majority of studies primarily focus on the detection of the perceptual demands of consumers from the target product category. A pan-ethnic-group products form gene clustering method based on emotional semantic is constructed. Consumers' perceptual images of the pan-ethnic-group products are obtained by means of product form gene extraction and coding and computer aided product form clustering technology. A case of form gene clustering about the typical pan-ethnic-group products is investigated which indicates that the method is feasible. This paper opens up a new direction for the future development of product form design which improves the agility of product design process in the era of Industry 4.0.

Products of composite operators in the exact renormalization group formalism

Science.gov (United States)

Pagani, C.; Sonoda, H.

2018-02-01

We discuss a general method of constructing the products of composite operators using the exact renormalization group formalism. Considering mainly the Wilson action at a generic fixed point of the renormalization group, we give an argument for the validity of short-distance expansions of operator products. We show how to compute the expansion coefficients by solving differential equations, and test our method with some simple examples.

Matrix product operators, matrix product states, and ab initio density matrix renormalization group algorithms

Science.gov (United States)

Chan, Garnet Kin-Lic; Keselman, Anna; Nakatani, Naoki; Li, Zhendong; White, Steven R.

2016-07-01

Current descriptions of the ab initio density matrix renormalization group (DMRG) algorithm use two superficially different languages: an older language of the renormalization group and renormalized operators, and a more recent language of matrix product states and matrix product operators. The same algorithm can appear dramatically different when written in the two different vocabularies. In this work, we carefully describe the translation between the two languages in several contexts. First, we describe how to efficiently implement the ab initio DMRG sweep using a matrix product operator based code, and the equivalence to the original renormalized operator implementation. Next we describe how to implement the general matrix product operator/matrix product state algebra within a pure renormalized operator-based DMRG code. Finally, we discuss two improvements of the ab initio DMRG sweep algorithm motivated by matrix product operator language: Hamiltonian compression, and a sum over operators representation that allows for perfect computational parallelism. The connections and correspondences described here serve to link the future developments with the past and are important in the efficient implementation of continuing advances in ab initio DMRG and related algorithms.

Group Milieu in systemic and psychodynamic group therapy

DEFF Research Database (Denmark)

Lau, Marianne Engelbrecht

Objectives: A recent meta-analysis also concluded that psychotherapeutic approaches are beneficial for adult with a history of CSA and maintained for at least six months follow-up. The results suggest that different characteristics of therapy moderate the therapeutic outcome. We found in a random......Objectives: A recent meta-analysis also concluded that psychotherapeutic approaches are beneficial for adult with a history of CSA and maintained for at least six months follow-up. The results suggest that different characteristics of therapy moderate the therapeutic outcome. We found....... Methods: This randomized prospective study included 106 women: 52 assigned to psychodynamic group psychotherapy and 54 assigned to systemic group psychotherapy. The Group Environment Scale (GES) was filled in the mid phase of therapy and analysed in three dimensions and 10 subscales. Results: The systemic...... subscales: Cohesion (pLeader support (p=0.001), Expressiveness (p

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

Annual Coded Wire Tag Program; Oregon Missing Production Groups, 1994 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Garrison, Robert L.; Isaac, Dennis L.; Lewis, Mark A.

1994-12-01

The goal of this program is to develop the ability to estimate hatchery production survival values and evaluate effectiveness of Oregon hatcheries. To accomplish this goal. We are tagging missing production groups within hatcheries to assure each production group is identifiable to allow future evaluation upon recovery of tag data.

PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

Directory of Open Access Journals (Sweden)

Đ. Senčić

2006-12-01

Full Text Available The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295, they consumed more feed on daily basis (129 g : 115 g, more feed per kilogram of egg weight (2.83 kg : 2.35 kg, they had higher mortality rate (6.80 % : 5.50 % and lower end of lay body weight (1.95 kg : 2.10 kg. Eggs from free range layers, compared to those from the cages system, had significantly (P0.05 were determined between the free range and the cages system of housing hens. Considering somewhat lower productivity and higher mortality rate of hens, higher feed consumption per kilogram of egg mass, but also better quality of eggs, profitability of egg production in the free range system will depend, to the maximum extent, on market evaluation of the production.

EFFECTIVE FACTORS AND MODEL SYSTEMS IN THE INDUSTRIAL PRODUCTION OF NISIN

Directory of Open Access Journals (Sweden)

Ömer ŞİMŞEK

2007-01-01

Full Text Available Nisin is the first bacteriocin identified in Lactococcus lactis and belongs to type 1 lanthibiotic group. High nisin production in cultured media is related with the composition of fermentation medium, pH, produced nisin concentration and most importantly growth amount of cell. For industrial purpose, batch, fed-batch and continue fermentation systems were developed by regarding these factors. Maintaining efficient production of nisin having important potential at preservation of foods is important for both industrial production and using as starter culture. In this review the fermentation factors at nisin production were outlined and constructed model systems were compared.

Operating room nursing directors' influence on anesthesia group operating room productivity.

Science.gov (United States)

Masursky, Danielle; Dexter, Franklin; Nussmeier, Nancy A

2008-12-01

Implementation of initiatives to increase anesthesia group productivity depends not just on anesthesia groups, but on operating room (OR) nursing administration. OR nursing directors may encourage organizational change based on the needs of their hospitals and nurses. These changes may differ from those that would increase the anesthesia group's productivity. We assessed reward structures using (A) letters of nomination for the "OR Manager of the Year" award offered annually by the publication OR Manager, and (B) data from a salary/career survey of OR directors by the same publication. (A) There were 164 nomination letters submitted from 2004 through 2007 for 45 nominees. The letters contained n = 2659 full sentences and n = 50,821 words. We systematically created a list of 36 terms related to finance, profit, and productivity. We also analyzed the frequency of use of these terms relative to the use of the 15 most common relationship-oriented terms (e.g., compassion, encourage, mentor, and respect). (B) The salary/career survey's questions relevant to anesthesia group productivity had responses from 303 US OR directors, 97% of whom were nurses. We tested the strength of the relationship between the budget responsibility of the OR nursing director and his or her annual salary. (A) 2.6% of sentences in the nomination letters included at least one term related to profit and productivity (95% confidence interval 2.0%-3.2%). Relationship-oriented terms were 9.0 times more prevalent (95% confidence interval 7.1-11.4). (B) There was statistically significant positive proportionality between the OR nursing director's operational budget (including personnel) and his or her salary (Pearson r = 0.64, P time and OR nursing labor costs. Resulting decisions can differ from those that would increase the productivity (profit) of the anesthesia group. Anesthesia groups need to champion initiatives to increase anesthesia productivity, while being sensitive to institutional

Visual Grouping in Accordance With Utterance Planning Facilitates Speech Production

Directory of Open Access Journals (Sweden)

Liming Zhao

2018-03-01

Full Text Available Research on language production has focused on the process of utterance planning and involved studying the synchronization between visual gaze and the production of sentences that refer to objects in the immediate visual environment. However, it remains unclear how the visual grouping of these objects might influence this process. To shed light on this issue, the present research examined the effects of the visual grouping of objects in a visual display on utterance planning in two experiments. Participants produced utterances of the form “The snail and the necklace are above/below/on the left/right side of the toothbrush” for objects containing these referents (e.g., a snail, a necklace and a toothbrush. These objects were grouped using classic Gestalt principles of color similarity (Experiment 1 and common region (Experiment 2 so that the induced perceptual grouping was congruent or incongruent with the required phrasal organization. The results showed that speech onset latencies were shorter in congruent than incongruent conditions. The findings therefore reveal that the congruency between the visual grouping of referents and the required phrasal organization can influence speech production. Such findings suggest that, when language is produced in a visual context, speakers make use of both visual and linguistic cues to plan utterances.

Visual Grouping in Accordance With Utterance Planning Facilitates Speech Production.

Science.gov (United States)

Zhao, Liming; Paterson, Kevin B; Bai, Xuejun

2018-01-01

Research on language production has focused on the process of utterance planning and involved studying the synchronization between visual gaze and the production of sentences that refer to objects in the immediate visual environment. However, it remains unclear how the visual grouping of these objects might influence this process. To shed light on this issue, the present research examined the effects of the visual grouping of objects in a visual display on utterance planning in two experiments. Participants produced utterances of the form "The snail and the necklace are above/below/on the left/right side of the toothbrush" for objects containing these referents (e.g., a snail, a necklace and a toothbrush). These objects were grouped using classic Gestalt principles of color similarity (Experiment 1) and common region (Experiment 2) so that the induced perceptual grouping was congruent or incongruent with the required phrasal organization. The results showed that speech onset latencies were shorter in congruent than incongruent conditions. The findings therefore reveal that the congruency between the visual grouping of referents and the required phrasal organization can influence speech production. Such findings suggest that, when language is produced in a visual context, speakers make use of both visual and linguistic cues to plan utterances.

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

Adoption of web-based group decision support systems: Experiences from the field and future developments

NARCIS (Netherlands)

van Hillegersberg, Jos; Koenen, Sebastiaan

2016-01-01

While organizations have massively adopted enterprise information systems to support business processes, business meetings in which key decisions are made about products, services and processes, are usually held without much support of information systems. This is remarkable as group decision

Focus point gauge mediation in product group unification

International Nuclear Information System (INIS)

Bruemmer, Felix; Ibe, Masahiro; Tokyo Univ., Kashiwa; Yanagida, Tsutomu T.

2013-03-01

In certain models of gauge-mediated supersymmetry breaking with messenger fields in incomplete GUT multiplets, the radiative corrections to the Higgs potential cancel out during renormalization group running. This allows for relatively heavy superpartners and for a 125 GeV Higgs while the ne-tuning remains modest. In this paper, we show that such gauge mediation models with ''focus point'' behaviour can be naturally embedded into a model of SU(5) x U(3) product group unification.

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Systems Biology of Microbial Exopolysaccharides Production.

Science.gov (United States)

Ates, Ozlem

2015-01-01

Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

Systems biology of microbial exopolysaccharides production

Directory of Open Access Journals (Sweden)

Ozlem eAtes

2015-12-01

Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

Entanglement property in matrix product spin systems

International Nuclear Information System (INIS)

Zhu Jingmin

2012-01-01

We study the entanglement property in matrix product spin-ring systems systemically by von Neumann entropy. We find that: (i) the Hilbert space dimension of one spin determines the upper limit of the maximal value of the entanglement entropy of one spin, while for multiparticle entanglement entropy, the upper limit of the maximal value depends on the dimension of the representation matrices. Based on the theory, we can realize the maximum of the entanglement entropy of any spin block by choosing the appropriate control parameter values. (ii) When the entanglement entropy of one spin takes its maximal value, the entanglement entropy of an asymptotically large spin block, i.e. the renormalization group fixed point, is not likely to take its maximal value, and so only the entanglement entropy S n of a spin block that varies with size n can fully characterize the spin-ring entanglement feature. Finally, we give the entanglement dynamics, i.e. the Hamiltonian of the matrix product system. (author)

Borides of the group 1 metals of the periodic system

International Nuclear Information System (INIS)

Samsonov, G.V.; Serebryakova, T.I.; Neronov, V.A.

1975-01-01

The borides of alkali metals (lithium, sodium, potassium) and the metals of a copper subgroup (copper, silver, gold) are described. Consideration is given to the crystalline structure and state diagrams of the metal systems within the first group of the Periodic Table with boron. Existence, formation conditions and physico-chemical properties of binary boride phases are characterized. Conclusion is made as to the absence of interaction between boron and silver. Information on the interaction between gold and boron is scanty and conflicting. Methods are described suitable for the production of the borides of the metals within the first group of the Periodic Table [ru

Integrated Multimedia Based Intelligent Group Decision Support System for Electrical Power Network

Directory of Open Access Journals (Sweden)

Ajay Kumar Saxena

2002-05-01

Full Text Available Electrical Power Network in recent time requires an intelligent, virtual environment based decision process for the coordination of all its individual elements and the interrelated tasks. Its ultimate goal is to achieve maximum productivity and efficiency through the efficient and effective application of generation, transmission, distribution, pricing and regulatory systems. However, the complexity of electrical power network and the presence of conflicting multiple goals and objectives postulated by various groups emphasized the need of an intelligent group decision support system approach in this field. In this paper, an Integrated Multimedia based Intelligent Group Decision Support System (IM1GDSS is presented, and its main components are analyzed and discussed. In particular attention is focused on the Data Base, Model Base, Central Black Board (CBB and Multicriteria Futuristic Decision Process (MFDP module. The model base interacts with Electrical Power Network Load Forecasting and Planning (EPNLFP Module; Resource Optimization, Modeling and Simulation (ROMAS Module; Electrical Power Network Control and Evaluation Process (EPNCAEP Module, and MFDP Module through CBB for strategic planning, management control, operational planning and transaction processing. The richness of multimedia channels adds a totally new dimension in a group decision making for Electrical Power Network. The proposed IMIGDSS is a user friendly, highly interactive group decision making system, based on efficient intelligent and multimedia communication support for group discussions, retrieval of content and multi criteria decision analysis.

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

Focus point gauge mediation in product group unification

Energy Technology Data Exchange (ETDEWEB)

Bruemmer, Felix [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Ibe, Masahiro [Tokyo Univ., Kashiwa (Japan). Kavli IPMU, TODIAS; Tokyo Univ., Kashiwa (Japan). ICRR; Yanagida, Tsutomu T. [Tokyo Univ., Kashiwa (Japan). Kavli IPMU, TODIAS

2013-03-15

In certain models of gauge-mediated supersymmetry breaking with messenger fields in incomplete GUT multiplets, the radiative corrections to the Higgs potential cancel out during renormalization group running. This allows for relatively heavy superpartners and for a 125 GeV Higgs while the ne-tuning remains modest. In this paper, we show that such gauge mediation models with ''focus point'' behaviour can be naturally embedded into a model of SU(5) x U(3) product group unification.

Production process for advanced space satellite system cables/interconnects.

Energy Technology Data Exchange (ETDEWEB)

Mendoza, Luis A.

2007-12-01

This production process was generated for the satellite system program cables/interconnects group, which in essences had no well defined production process. The driver for the development of a formalized process was based on the set backs, problem areas, challenges, and need improvements faced from within the program at Sandia National Laboratories. In addition, the formal production process was developed from the Master's program of Engineering Management for New Mexico Institute of Mining and Technology in Socorro New Mexico and submitted as a thesis to meet the institute's graduating requirements.

Renormalization group approach to Sudakov resummation in prompt photon production

International Nuclear Information System (INIS)

Bolzoni, Paolo; Forte, Stefano; Ridolfi, Giovanni

2005-01-01

We prove the all-order exponentiation of soft logarithmic corrections to prompt photon production in hadronic collisions, by generalizing an approach previously developed in the context of Drell-Yan production and deep-inelastic scattering. We show that all large logs in the soft limit can be expressed in terms of two dimensionful variables, and we use the renormalization group to resum them. The resummed results that we obtain are more general though less predictive than those proposed by other groups, in that they can accommodate for violations of Sudakov factorization

Group Frames With Few Distinct Inner Products and Low Coherence

KAUST Repository

Thill, Matthew

2015-10-01

Frame theory has been a popular subject in the design of structured signals and codes in recent years, with applications ranging from the design of measurement matrices in compressive sensing, to spherical codes for data compression and data transmission, to spacetime codes for MIMO communications, and to measurement operators in quantum sensing. High-performance codes usually arise from designing frames whose elements have mutually low coherence. Building off the original “group frame” design of Slepian which has since been elaborated in the works of Vale and Waldron, we present several new frame constructions based on cyclic and generalized dihedral groups. Slepian\\'s original construction was based on the premise that group structure allows one to reduce the number of distinct inner pairwise inner products in a frame with n elements from [(n(n-1))/2] to n-1. All of our constructions further utilize the group structure to produce tight frames with even fewer distinct inner product values between the frame elements. When n is prime, for example, we use cyclic groups to construct m-dimensional frame vectors with at most [(n-1)/m] distinct inner products. We use this behavior to bound the coherence of our frames via arguments based on the frame potential, and derive even tighter bounds from combinatorial and algebraic arguments using the group structure alone. In certain cases, we recover well-known Welch bound achieving frames. In cases where the Welch bound has not been achieved, and is not known to be achievable, we obtain frames with close to Welch bound performance.

A generalized Wigner function for quantum systems with the SU(2) dynamical symmetry group

International Nuclear Information System (INIS)

Klimov, A B; Romero, J L

2008-01-01

We introduce a Wigner-like quasidistribution function to describe quantum systems with the SU(2) dynamic symmetry group. This function is defined in a three-dimensional group manifold and can be used to represent the states defined in several SU(2) invariant subspaces. The explicit differential Moyal-like form of the star product is found and analyzed in the semiclassical limit

Energy production systems engineering

CERN Document Server

Blair, Thomas Howard

2017-01-01

Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

Narcissistic group dynamics of multiparty systems

NARCIS (Netherlands)

Schruijer, S.G.L.

2015-01-01

Purpose – This paper aims to introduce and illustrate the notion of narcissistic group dynamics. It is claimed that narcissism does not simply reside within individuals but can be characteristic of groups and social systems. In this case, the focus is on narcissistic dynamics in multiparty systems.

Application of Mixed Group Decision Making to Safety Evaluation of Agricultural Products

Institute of Scientific and Technical Information of China (English)

2012-01-01

In view of the gravity of issues concerning safety of agricultural products and urgency of resolving these issues,after analyzing the problems existing in safety of agricultural products,this article offers a method for evaluating safety of agricultural products on the basis of mixed group decision making.First of all,it introduces the factors influencing safety evaluation of agricultural products;subsequently,given that the judgment matrices offered by the group of experts contain both reciprocal and complementary judgment matrices in the process of jointly participating in evaluation arising from personal preference,it proposes to assemble expert information in order to obtain indicator weight using the OWA operator;finally,the process of evaluating safety of agricultural products is given.

76 FR 46854 - Hewlett Packard Company, Imaging and Printing Group, World Wide Product Data Management...

Science.gov (United States)

2011-08-03

..., Imaging and Printing Group, World Wide Product Data Management Operations, Including On-Site Leased... Company, Imaging and Printing Group, World Wide Products Data Management Operations, Boise, Idaho and Fort... of Hewlett Packard Company, Imaging and Printing Group, World Wide Product Data Management Operations...

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

The Future of Pork Production in the World: Towards Sustainable, Welfare-Positive Systems.

Science.gov (United States)

McGlone, John J

2013-05-15

Among land animals, more pork is eaten in the world than any other meat. The earth holds about one billion pigs who deliver over 100 mmt of pork to people for consumption. Systems of pork production changed from a forest-based to pasture-based to dirt lots and finally into specially-designed buildings. The world pork industry is variable and complex not just in production methods but in economics and cultural value. A systematic analysis of pork industry sustainability was performed. Sustainable production methods are considered at three levels using three examples in this paper: production system, penning system and for a production practice. A sustainability matrix was provided for each example. In a comparison of indoor vs. outdoor systems, the food safety/zoonoses concerns make current outdoor systems unsustainable. The choice of keeping pregnant sows in group pens or individual crates is complex in that the outcome of a sustainability assessment leads to the conclusion that group penning is more sustainable in the EU and certain USA states, but the individual crate is currently more sustainable in other USA states, Asia and Latin America. A comparison of conventional physical castration with immunological castration shows that the less-common immunological castration method is more sustainable (for a number of reasons). This paper provides a method to assess the sustainability of production systems and practices that take into account the best available science, human perception and culture, animal welfare, the environment, food safety, worker health and safety, and economics (including the cost of production and solving world hunger). This tool can be used in countries and regions where the table values of a sustainability matrix change based on local conditions. The sustainability matrix can be used to assess current systems and predict improved systems of the future.

The Future of Pork Production in the World: Towards Sustainable, Welfare-Positive Systems

Directory of Open Access Journals (Sweden)

John J. McGlone

2013-05-01

Full Text Available Among land animals, more pork is eaten in the world than any other meat. The earth holds about one billion pigs who deliver over 100 mmt of pork to people for consumption. Systems of pork production changed from a forest-based to pasture-based to dirt lots and finally into specially-designed buildings. The world pork industry is variable and complex not just in production methods but in economics and cultural value. A systematic analysis of pork industry sustainability was performed. Sustainable production methods are considered at three levels using three examples in this paper: production system, penning system and for a production practice. A sustainability matrix was provided for each example. In a comparison of indoor vs. outdoor systems, the food safety/zoonoses concerns make current outdoor systems unsustainable. The choice of keeping pregnant sows in group pens or individual crates is complex in that the outcome of a sustainability assessment leads to the conclusion that group penning is more sustainable in the EU and certain USA states, but the individual crate is currently more sustainable in other USA states, Asia and Latin America. A comparison of conventional physical castration with immunological castration shows that the less-common immunological castration method is more sustainable (for a number of reasons. This paper provides a method to assess the sustainability of production systems and practices that take into account the best available science, human perception and culture, animal welfare, the environment, food safety, worker health and safety, and economics (including the cost of production and solving world hunger. This tool can be used in countries and regions where the table values of a sustainability matrix change based on local conditions. The sustainability matrix can be used to assess current systems and predict improved systems of the future.

The productivity and work load in flexible production systems

NARCIS (Netherlands)

Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

2006-01-01

A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

Report of study group 3.2 ''small scale LNG projects and modular systems''; Rapport du groupe d'etude 3.2 ''projets de GNL a petite echelle et systemes modulaires''

Energy Technology Data Exchange (ETDEWEB)

Larsen, B.

2000-07-01

This report details the work undertaken by Study Group 3.2 during the triennium 1997-2000. The Study Group has held three meetings in Stavanger (Norway) in Dubai (UAE) and in London (UK) between March 1998 and October 1999. The study group membership is listed in appendix 1. The subject treated by the Study Group is 'Small Scale LNG Projects and Modular Systems' The study report undertakes a general survey of: 1) the state of the art of the technology; 2) the potential market applications; 3) prospects for gas development and marginal fields. The study addresses three main items: a) Adapting regulation to compact LNG production systems (e.g. distances between equipment in fixed installations); b) LNG production in a marine environment; c) The need for substantial cost reductions. The questions that are addressed in this study report are: Will small scale LNG projects be economically viable? When an onshore industry moves offshore - which standards are to be applied? (author)

ATLAS production system

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

2016-01-01

The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

The ATLAS Production System Evolution: New Data Processing and Analysis Paradigm for the LHC Run2 and High-Luminosity

Science.gov (United States)

Barreiro, F. H.; Borodin, M.; De, K.; Golubkov, D.; Klimentov, A.; Maeno, T.; Mashinistov, R.; Padolski, S.; Wenaus, T.; ATLAS Collaboration

2017-10-01

The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS specific workflows, across more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteer-computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resources utilization is one of the major features of the system, it didn’t exist in the earliest versions of the production system where Grid resources topology was predefined using national or/and geographical pattern. Production System has a sophisticated job fault-recovery mechanism, which efficiently allows to run multi-Terabyte tasks without human intervention. We have implemented “train” model and open-ended production which allow to submit tasks automatically as soon as new set of data is available and to chain physics groups data processing and analysis with central production by the experiment. We present an overview of the ATLAS Production System and its major components features and architecture: task definition, web user interface and monitoring. We describe the important design decisions and lessons learned from an operational experience during the first year of LHC Run2. We also report the performance of the designed system and how various workflows, such as data (re)processing, Monte-Carlo and physics group production, users analysis, are scheduled and executed within one production system on heterogeneous computing resources.

Predictive analytics tools to adjust and monitor performance metrics for the ATLAS Production System

CERN Document Server

Titov, Mikhail; The ATLAS collaboration

2017-01-01

Every scientific workflow involves an organizational part which purpose is to plan an analysis process thoroughly according to defined schedule, thus to keep work progress efficient. Having such information as an estimation of the processing time or possibility of system outage (abnormal behaviour) will improve the planning process, provide an assistance to monitor system performance and predict its next state. The ATLAS Production System is an automated scheduling system that is responsible for central production of Monte-Carlo data, highly specialized production for physics groups, as well as data pre-processing and analysis using such facilities as grid infrastructures, clouds and supercomputers. With its next generation (ProdSys2) the processing rate is around 2M tasks per year that is more than 365M jobs per year. ProdSys2 evolves to accommodate a growing number of users and new requirements from the ATLAS Collaboration, physics groups and individual users. ATLAS Distributed Computing in its current stat...

Productive Systems and the Structuring Role of Economic and Social Theories

OpenAIRE

Frank Wilkinson

2002-01-01

The institutions of productive systems are structured by mutual interests and relative power. Securing mutually beneficial cooperation in production requires resolving distributional differences. These objectives are secured in liberal economic theory by the working of markets which mediate the power of individuals and reward individual success. The centrality of individuals and hierarchies in market theory contrasts with developments in labour management theory which identifies group activit...

Finding Sales Promotion and Making Decision for New Product Based on Group Analysis of Edge-Enhanced Product Networks

Science.gov (United States)

Huang, Yi; Tan, Jianbin; Wu, Bin

A novel method is proposed in this paper to find the promotive relationship of products from a network point of view. Firstly, a product network is built based on the dataset of handsets’ sale information collected from all outlets of a telecom operator of one province of China, with a period from Jan. 2006 to Jul. 2008. Then the edge enhanced model is applied on product network to divide all the products into several groups, according to which each outlet is assigned to class A or class B for a certain handset. Class A is defined as the outlet which sell the certain handset and contains all of handsets of its group, while other situation for class B which sell the certain handset too. It’s shown from the result of analysis on these two kinds of outlets that many handsets are sold better in outlets of class A than that of class B, even though the sales revenue of all these outlets in the time period is close. That is to say the handsets within a group would promote the sale for each other. Furthermore, a method proposed in this paper gives a way to find out the important attributes of the handsets which lead them to br divided into the same group, and it also explains how to add a new handset to an existing group and where would the new handset be sold best.

Observed benefits from product configuration systems

DEFF Research Database (Denmark)

Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

2013-01-01

This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... affected by the use of product configu-ration systems e.g. increased sales, decrease in the number of SKU's, improved ability to introduce new products, and cost reductions.......This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... processes, on-time delivery of the specifica-tions, and resource consumption for making specifications, quality of specifications, optimization of products and services, and other observations. The purpose of the study is partly to identify specific impacts observed from implementing product configuration...

The system Around the Product

DEFF Research Database (Denmark)

Morelli, Nicola

      The design discipline has traditionally focused on products physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ?operative paradigm? to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors? role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

Modeling Novo Nordisk Production Systems

DEFF Research Database (Denmark)

Miller, Thomas Dedenroth

1997-01-01

This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

Analytic and Systemic Specialized Incest Group Psychotherapy

DEFF Research Database (Denmark)

Elkjaer, Henriette Kiilsholm; Mortensen, Erik Lykke; Poulsen, Stig Bernt

PURPOSE: Women with long-term sequalae of child sexual abuse (CSA) were randomly assigned to analytic (Group A) or systemic group psychotherapy (Group S). Pre-post-analysis indicated that both therapies led to significant improvement, but overall Group S had significantly better outcome than Group...

PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

OpenAIRE

Đ. Senčić; Danijela Butko

2006-01-01

The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295), they consumed more feed on daily basis (129 g : 115 g), more feed per kilogram of egg weight (2.83 kg : 2.35 kg), they had higher mor...

Automated plant, production management system

Science.gov (United States)

Aksenova, V. I.; Belov, V. I.

1984-12-01

The development of a complex of tasks for the operational management of production (OUP) within the framework of an automated system for production management (ASUP) shows that it is impossible to have effective computations without reliable initial information. The influence of many factors involving the production and economic activity of the entire enterprise upon the plan and course of production are considered. It is suggested that an adequate model should be available which covers all levels of the hierarchical system: workplace, section (bridgade), shop, enterprise, and the model should be incorporated into the technological sequence of performance and there should be provisions for an adequate man machine system.

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

Directory of Open Access Journals (Sweden)

Ignacio Eguia

2011-10-01

Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

Typology of dairy production systems based on the characteristics of management in the Region of West Paraná

Directory of Open Access Journals (Sweden)

Maichel Jhonattas Lange

2016-02-01

Full Text Available Milk production in Brazil is complex, as it depends on a wide base of small-scale producers employing diverse strategies. In recent years, the supply chain has undergone considerable structural changes, increasing the need for knowledge and characterization of milk-production activities. Therefore, the objective proposed in this study was to characterize rural properties according to various aspects of production in order to identify the dairy cattle production systems of Western Paraná. To this end, 735 interviews were conducted through semi-structured questionnaires administered to dairy farmers using a questionnaire tab for the diversity of management practices in production systems. Data were tabulated and processed by SPSS-v.18, using multiple correspondence analysis: ACM and cluster analysis (hierarchical cluster. The first two dimensions grouped 71.9% of the total variance: DIM1 as 49.4% and DIM2 as 22.5%. Using cluster analysis, five distinct and homogeneous groups (G1, G2, G3, G4, and G5 of production systems were formed. These systems shared the common feature of small properties and were supported primarily by manual labor performed by family members. It is concluded that various milk producing groups exist in the city, with respect to the characteristics of production systems: ownership structure, squad, and how producers mobilize and act on the factors of production. The typology carried out from these characteristics demonstrates a useful tool for action and technical assistance in developing strategies for the industry.

Internationalization of product-service systems: Global, regional or national strategy?

OpenAIRE

Parry, G.; Bustinza, O. F.; Vendrell-Herrero, F.; O'Regan, N.

2016-01-01

This paper explores the validity of national, regional or global strategies in the provision of a music industry product service system. Quantitative analysis of cross-section data from over 70,000 respondents from 15 geographically spread countries identified a homogeneous group of so-called ‘Out of Touch’ consumers characterized by a shared attitude: they are interested in and have the money to purchase music, but no longer do so. The analysis ascertains if and how re-engaging this group in...

The attachment of metal-chelating groups to proteins: tagging of albumin by diazonium coupling and use of the products as radiopharmaceuticals

International Nuclear Information System (INIS)

Leung, C.S.H.; Meares, C.F.; Goodwin, D.A.

1978-01-01

The ability to attach firmly chelated metal ions or powerful chelating agents to sites on biological molecules can enhance the utility of a number of physical techniques now used in the study of biological systems. A 'bifunctional' chelating agent, containing both an EDTA group and a diazonium group, has been prepared and coupled to human serum albumin. The extent of labeling under various conditions and the amino-acid sidechains labeled have been investigated. The reaction of protein-bound chelating groups with added metal ions has been studied, with the finding that only about 40-50% of these groups are available to bind metal ions. Proteolysis of the products leads to recovery of full metal-binding capacity. Properties of the products in vivo are discussed. (author)

TFA Systems: A Unique Group Treatment of Spouse Abusers.

Science.gov (United States)

Clow, Daniel R.; And Others

1992-01-01

Presents a group treatment model using Thought-Feeling-Action (TFA) Systems, an offense- and offender-specific group treatment for abusers. Describes use of TFA Systems in group of court-referred male spouse-abusers. Reviews evolution of TFA Systems, then focuses on TFA Systems treatment of spouse abusers. Notes that system can be adapted to other…

A comparison between star products on regular orbits of compact Lie groups

International Nuclear Information System (INIS)

Fioresi, R.; Lledo, M.A.

2002-01-01

In this paper, an algebraic and a differential star product defined on a regular coadjoint orbit of a compact semisimple group are compared. It has been proved that there is an injective algebra homomorphism between the algebra of polynomials with the algebraic star product and the algebra of differential functions with the differential star product structure. (author)

The SPOOKI post production system

Science.gov (United States)

Beauchemin, M.; Klasa, M.; Fortier, S.; Fortin, F.; Hardy, G.; Pelletier, L.; Edouard, S.; Archambault, B.; Yazidi, H.

2010-09-01

The Canadian Meteorological Centre (CMC) delivers a large number of numerical weather prediction products to the various weather offices and clients throughout Canada and abroad. The current post production system was built according to the needs and ideology of the 1980's and it is becoming obsolete with time. Its cumbersome architecture is difficult to maintain and requires a lot of human and computing resources. The "Weather Elements" section of CMC is aware of the problems associated with its maintenance in the long term and has therefore decided to review in depth the whole approach to the operational post production. The analysis of present and future needs have led to the development of an innovative concept in the operational production field inspired by the "Plug and Play" process. SPOOKI (Système de Production Orienté-Objet contennant une Kyrielle d'Informations - Object oriented production system containing a myriad of information) was created in its present form in 2007. It is based on a modular approach where each plug-in component is specialized, reusable and autonomous. These object oriented programming characteristics greatly simplify the maintenance of the system. Particular attention was also given to create a user-friendly system for novice users. An experimental version of SPOOKI is currently running in development mode and an operational one is planned to be implemented in the coming year. The poster presentation will describe SPOOKI, the future CMC operational post production system. Several examples of usage will be shown.

NDSI products system based on Hadoop platform

Science.gov (United States)

Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

2015-12-01

Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

Pesticide Product Label System

Data.gov (United States)

U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

Quantum groups, orthogonal polynomials and applications to some dynamical systems; Groupes quantiques, polynomes orthogonaux et applications a quelques systemes dynamiques

Energy Technology Data Exchange (ETDEWEB)

Campigotto, C

1993-12-01

The first part is concerned with the introduction of quantum groups as an extension of Lie groups. In particular, we study the case of unitary enveloping algebras in dimension 2. We then connect the quantum group formalism to the construction of g CGC recurrent relations. In addition, we construct g-deformed Krawtchouck and Meixner orthogonal polynomials and list their respective main characteristics. The second part deals with some dynamical systems from a classical, a quantum and a gp-analogue point of view. We investigate the Coulomb Kepler system by using the canonical namical systems which contain as special cases some interesting systems for nuclear of atomic physics and for quantum chemistry, such as the Hartmann system, the ring-shaped oscillator, the Smarodinsky-Winternitz system, the Aharonov-Bohen system and the dyania of Dirac and Schroedinger. (author). 291 refs.

Detailed design of product oriented manufacturing systems

OpenAIRE

Silva, Sílvio Carmo; Alves, Anabela Carvalho

2006-01-01

This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

Property ($T$) for groups graded by root systems

CERN Document Server

Ershov, Mikhail; Kassabov, Martin

2017-01-01

The authors introduce and study the class of groups graded by root systems. They prove that if \\Phi is an irreducible classical root system of rank \\geq 2 and G is a group graded by \\Phi, then under certain natural conditions on the grading, the union of the root subgroups is a Kazhdan subset of G. As the main application of this theorem the authors prove that for any reduced irreducible classical root system \\Phi of rank \\geq 2 and a finitely generated commutative ring R with 1, the Steinberg group {\\mathrm St}_{\\Phi}(R) and the elementary Chevalley group \\mathbb E_{\\Phi}(R) have property (T). They also show that there exists a group with property (T) which maps onto all finite simple groups of Lie type and rank \\geq 2, thereby providing a "unified" proof of expansion in these groups.

Improvement of Artistic Cast Production System

Directory of Open Access Journals (Sweden)

Władysiak R.

2017-09-01

Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

Characterization and typification of citrus production systems in the department of Meta

Directory of Open Access Journals (Sweden)

José Alejandro Cleves-Leguízamo

2014-04-01

Full Text Available Agriculture is a co-evolutionary process between society and nature. Agroecology is an environmental science which focuses on ecosystem-culture and society-nature interactive systems, the effect of human intervention in the transformation of ecosystems. The central objects are agroecosystems and the units of study are production units. These production units are conceived of as agricultural systems and are found in the crossroads of multiple interactions between biophysical, socioeconomical, cultural, and production components, which must be analyzed with an integrated concept. In the present study, a characterization and typification of the citrus agroecosystems of the department of Meta were pursued (Colombia. The pertinence of implementing the methodology designed by the Latin-American Center for Rural Development (Centro Latinoamericano para el Desarrollo Rural-RIMISP was evaluated, grouping the variables with a focus on an analysis of livelihoods. A survey and interview were defined as methods of collecting the primary information in the municipalities of Puerto López, Villavicencio, Granada, Lejanías, Guamal and San Martin, where 78.4% of the citrus area of the department is found. This study involved the selection and definition of the evaluation variables, validation and adjustment of said variables, collection of primary and secondary information, and the application of multivariate statistical analysis techniques to conform and characterize the recommendation domains or groups. The more important results indicated that it is possible to increase knowledge of the interrelations that exist between the different components of farm agroecosystems and their relationship with the principal agroecological structure. The existence of six agricultural groups or recommendation domains was established, with some productive characteristics very similar within the group but very heterogeneous to the outside of the group, with particular

Advanced system for separation of rare-earth fission products

International Nuclear Information System (INIS)

Baker, J.D.; Gehrke, R.J.; Greenwood, R.C.; Meikrantz, D.H.

1982-01-01

A microprocessor-controlled radiochemical separation system has been further advanced to separate individual rare-earth elements from mixed fission products in times of a few minutes. The system was composed of an automated chemistry system fed by two approximately 300 μg 252 Cf sources coupled directly by a He-jet to transport the fission products. Chemical separations were performed using two high performance liquid chromatography columns coupled in series. The first column separated the rare-earth group by extraction chromatography using dihexyldiethylcarbamoylmethylphosphonate (DHDECMP) adsorbed on Vydac C 8 resin. The second column isolated the individual rare-earth elements by cation exchange chromatography using Aminex A-9 resin with α-hydroxyisobutyric acid (α-HIBA) as the eluent. Significant results, which have been obtained to date with this advanced system, are the identification of several new neutron-rich rare-earth isotopes including 155 Pm (T=48+-4 s) and 163 Gd (T=68+-3 s). In addition, a half-life of 41+-4 s is reported for 160 Eu. (author)

Simulating quantum systems on classical computers with matrix product states

International Nuclear Information System (INIS)

Kleine, Adrian

2010-01-01

In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. To obtain algorithms to efficiently calculate ground states, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotropic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases is shown numerically by using Matrix-Product-States-based algorithms. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of

Simulating quantum systems on classical computers with matrix product states

Energy Technology Data Exchange (ETDEWEB)

Kleine, Adrian

2010-11-08

In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. To obtain algorithms to efficiently calculate ground states, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotropic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases is shown numerically by using Matrix-Product-States-based algorithms. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of

Innovativeness in production systems

DEFF Research Database (Denmark)

Blichfeldt, Henrik; Knudsen, Mette Præst

Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......, but revealed also automation potential in data and information management to be more responsive and cost-effective....

The universal library of fission products and delayed neutron group yields

International Nuclear Information System (INIS)

Koldobskiy, A.B.; Zhivun, V.M.

1997-01-01

A new fission product yield library based on the Semiempirical method for the estimation of their mass and charge distribution is described. Contrary to other compilations, this library can be used with all possible excitation energies of fissionable actinides. The library of delayed neutron group yields, based on the fission product yield compilation, is described as well. (author). 15 refs, 4 tabs

Crossed products by endomorphisms, vector bundles and group duality, II

OpenAIRE

Vasselli, Ezio

2004-01-01

We study C*-algebra endomorphims which are special in a weaker sense w.r.t. the notion introduced by Doplicher and Roberts. We assign to such endomorphisms a geometrical invariant, representing a cohomological obstruction for them to be special in the usual sense. Moreover, we construct the crossed product of a C*-algebra by the action of the dual of a (nonabelian, noncompact) group of vector bundle automorphisms. These crossed products supply a class of examples for such generalized special ...

Production Systems and Supplier Selection

DEFF Research Database (Denmark)

Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

2016-01-01

strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...

Description, Modelling and Design of Production Systems

DEFF Research Database (Denmark)

Jacobsen, Peter; Rudolph, Carsten

1997-01-01

Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

Integrated Monitoring System of Production Processes

Directory of Open Access Journals (Sweden)

Oborski Przemysław

2016-12-01

Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

Group & Intergroup Relations in Living Human Systems.

Science.gov (United States)

1980-06-01

organizational diagnosis , the group is itself a living human system. A group may be underbounded, overbounded, or optimally bounded. The state of group...very im- portant to understand and to use in order to conduct organizational diagnosis " using group methods. 2 -43 (Alderfer, 1977b). The group...Boundary Relations and Organizational Diagnosis . In H. Meltzer and F.W. Wickert (eds.) Humanizing Organizational Behavior. Springfield, Illinois: Thomas

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Annual coded wire tag program, Washington: Missing production groups. Annual report for 1998

International Nuclear Information System (INIS)

Byrne, J.; Fuss, H.

1999-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded Wire Tag Program--Missing Production Groups for Columbia River Hatcheries'' project. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries

The Cuntz algebra Q_N and C*-algebras of product systems

DEFF Research Database (Denmark)

Hong, Jeong Hee; Larsen, Nadia S.; Szymanski, Wojciech

2011-01-01

We consider a product system over the multiplicative group semigroup N^x of Hilbert bimodules which is implicit in work of S. Yamashita and of the second named author. We prove directly, using universal properties, that the associated Nica-Toeplitz algebra is an extension of the C*-algebra Q...

Production interdependencies and poverty reduction across ethnic groups in Malaysia

NARCIS (Netherlands)

Saari, M. Yusof; Dietzenbacher, Erik; Los, Bart

2014-01-01

Production sectors are interdependent and the benefits of output growth for poverty reduction therefore spread over the economy. The role of such interdependencies is explicitly studied in this paper. A social accounting matrix for Malaysia that distinguishes between the major ethnic groups in

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

Distinguishing Little-Higgs product and simple group models at the LHC and ILC

International Nuclear Information System (INIS)

Kilian, W.; Rainwater, D.

2006-09-01

We propose a means to discriminate between the two basic variants of Little Higgs models, the Product Group and Simple Group models, at the next generation of colliders. It relies on a special coupling of light pseudoscalar particles present in Little Higgs models, the pseudo-axions, to the Z and the Higgs boson, which is present only in Simple Group models. We discuss the collider phenomenology of the pseudo-axion in the presence of such a coupling at the LHC, where resonant production and decay of either the Higgs or the pseudo-axion induced by that coupling can be observed for much of parameter space. The full allowed range of parameters, including regions where the observability is limited at the LHC, is covered by a future ILC, where double scalar production would be a golden channel to look for. (orig.)

Distinguishing Little-Higgs product and simple group models at the LHC and ILC

Energy Technology Data Exchange (ETDEWEB)

Kilian, W. [Siegen Univ. (Gesamthochschule) (Germany). Fachbereich 7 - Physik]|[Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Rainwater, D. [Rochester Univ., NY (United States). Dept. of Physics and Astronomy; Reuter, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2006-09-15

We propose a means to discriminate between the two basic variants of Little Higgs models, the Product Group and Simple Group models, at the next generation of colliders. It relies on a special coupling of light pseudoscalar particles present in Little Higgs models, the pseudo-axions, to the Z and the Higgs boson, which is present only in Simple Group models. We discuss the collider phenomenology of the pseudo-axion in the presence of such a coupling at the LHC, where resonant production and decay of either the Higgs or the pseudo-axion induced by that coupling can be observed for much of parameter space. The full allowed range of parameters, including regions where the observability is limited at the LHC, is covered by a future ILC, where double scalar production would be a golden channel to look for. (orig.)

The system around the product

DEFF Research Database (Denmark)

Morelli, Nicola

2006-01-01

The design discipline has traditionally focused on products’ physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ‘operative paradigm’ to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors’ role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

Sterile Product Packaging and Delivery Systems.

Science.gov (United States)

Akers, Michael J

2015-01-01

Both conventional and more advanced product container and delivery systems are the focus of this brief article. Six different product container systems will be discussed, plus advances in primary packaging for special delivery systems and needle technology.

Development of floating production systems for the new era

International Nuclear Information System (INIS)

Wennesland, J.M.

1995-01-01

Maritime Group will give a presentation of present and future trends within the floating production area. Based on the successful operation of Petrojarl 1 (Tentech 885) and now lately the Gryphon A (Tentech 850 C) operated by Kerr McGee a number of floating production systems are now under construction/design for North Sea applications. A status of three developments will be given with emphasize on field development scenarios and market opportunities for the vessels. Based on these on-going projects a discussion of future development trends and possibilities will be presented with special attention to making smaller North-Sea oil fields economically profitable

Livestock and feed water productivity in the mixed crop-livestock system.

Science.gov (United States)

Bekele, M; Mengistu, A; Tamir, B

2017-10-01

Recently with limited information from intensified grain-based farming systems in developed countries, livestock production is challenged as being huge consumer of freshwater. The smallholder mixed crop-livestock (MCL) system which is predominant in developing countries like Ethiopia, is maintained with considerable contributions of crop residues (CR) to livestock feeding. Inclusion of CR is expected to reduce the water requirement for feed production resulting improvement in livestock water productivity (LWP). This study was conducted to determine feed water productivity (FWP) and LWP in the MCL system. A multistage sampling procedure was followed to select farmers from different wealth status. Wealth status dictated by ownership of key farm resources such as size of cropland and livestock influenced the magnitude of livestock outputs, FWP and LWP. Significant difference in feed collected, freshwater evapotranspired, livestock outputs and water productivity (WP) were observed between wealth groups, where wealthier are relatively more advantaged. Water productivity of CR and grazing land (GL) analyzed separately showed contrasting differences where better-off gained more on CR, whereas vice versa on GL. These counterbalancing of variations may justify the non-significant difference in total FWP between wealth groups. Despite observed differences, low WP on GL indicates the need of interventions at all levels. The variation in WP of CR is attributed to availability of production factors which restrained the capacity of poor farmers most. A linear relationship between the proportion of CR in livestock feed and FWP was evident, but the relationship with LWP was not likely linear. As CR are inherently low in digestibility and nutritive values which have an effect on feed conversion into valuable livestock products and services, increasing share of CR beyond an optimum level is not a viable option to bring improvements in livestock productivity as expressed in terms of

Axiomatic design in large systems complex products, buildings and manufacturing systems

CERN Document Server

Suh, Nam

2016-01-01

This book provides a synthesis of recent developments in Axiomatic Design theory and its application in large complex systems. Introductory chapters provide concise tutorial materials for graduate students and new practitioners, presenting the fundamentals of Axiomatic Design and relating its key concepts to those of model-based systems engineering. A mathematical exposition of design axioms is also provided. The main body of the book, which represents a concentrated treatment of several applications, is divided into three parts covering work on: complex products; buildings; and manufacturing systems. The book shows how design work in these areas can benefit from the scientific and systematic underpinning provided by Axiomatic Design, and in so doing effectively combines the state of the art in design research with practice. All contributions were written by an international group of leading proponents of Axiomatic Design. The book concludes with a call to action motivating further research into the engineeri...

A Review of Group Systems Theory

Science.gov (United States)

Connors, Joanie V.; Caple, Richard B.

2005-01-01

The ability to see interpersonal and group processes beyond the individual level is an essential skill for group therapists (Crouch, Bloch & Wanlass, 1994; Dies, 1994; Fuhriman & Burlingame, 1994). In addition to interpersonal therapy models (e.g., Sullivan and Yalom), there are a number of systems theory models that offer a broad array of…

Thermal Heat and Power Production with Models for Local and Regional Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Saether, Sturla

1999-07-01

The primary goal of this thesis is the description and modelling of combined heat and power systems as well as analyses of thermal dominated systems related to benefits of power exchange. Large power plants with high power efficiency (natural gas systems) and heat production in local heat pumps can be favourable in areas with low infrastructure of district heating systems. This system is comparable with typical combined heat and power (CHP) systems based on natural gas with respect to efficient use of fuel energy. The power efficiency obtainable from biomass and municipal waste is relatively low and the advantage of CHP for this system is high compared to pure power production with local heat pumps for heat generation. The advantage of converting pure power systems into CHP systems is best for power systems with low power efficiency and heat production at low temperature. CHP systems are divided into two main groups according to the coupling of heat and power production. Some CHP systems, especially those with strong coupling between heat and power production, may profit from having a thermal heat storage subsystem. District heating temperatures direct the heat to power ratio of the CHP units. The use of absorption chillers driven by district heating systems are also evaluated with respect to enhancing the utilisation of district heating in periods of low heat demand. Power exchange between a thermal dominated and hydropower system is found beneficial. Use of hydropower as a substitute for peak power production in thermal dominated systems is advantageous. Return of base load from the thermal dominated system to the hydropower system can balance in the net power exchange.

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

CONSIDERATIONS ON ROMANIA’S AGRO-FOOD EXPORT AND IMPORT BY EUROPEAN UNION COUNTRY GROUP AND AGRO-FOOD PRODUCT GROUP

Directory of Open Access Journals (Sweden)

Agatha POPESCU

2013-10-01

Full Text Available The goal of the paper was the analysis of Romania’s the agro-food export, import and trade balance by the EU country group and agro-food product group based on the statistical data in the year 2010 in order to identify the commercial relationships with a positive and respectively a negative impact of the trade balance. The EU trade partners were divided into 4 groups: Central Eastern (CE, Western (W, Northern (N and Southern (S EU countries and the agro-food product groups were: Live animals and preparations of animal origin, Vegetal products, Fats and oils of vegetal and animal origin, Food, beverages and tobacco. The data were processed using the share and comparison methods. In 2010, Romania registered a negative agro-food trade balance with a deficit of Euro thousand 903,148.This was due to the unefficient commerce with the CE and W EU countries, which together recorded Euro Thousand 1,400,298 deficit. The balance was positively influenced by the Southern EU trade partners whose contribution accounted for Euro thousand 513,953. Therefore, the agro-food trade has to be intensified with the Southern EU countries and to become more relaxed with the CE and W EU countries, especially regarding imports. Live animals are mainly required in the CE and W EU countries, vegetal products in the W and S EU countries, fats and oils in the CE and S EU countries, and finally, food, beverages and tobacco in the S and the CE EU countries. Agro-food imports have to be substantially diminished as long as Romania’ s agriculture is able to produce for the internal market and export has to be intensified especially with the countries with a positive impact on the trade balance.

Effects of marketing group and production focus on quality and variability of adipose tissue and bellies sourced from a commercial processing facility.

Science.gov (United States)

Overholt, M F; Arkfeld, E K; Wilson, K B; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

2016-12-01

. Although a multiple-marketing strategy was effective at minimizing differences in belly characteristics, differences in the variability of these traits exist among marketing groups and are likely dependent on the production system used.

Integrating security in a group oriented distributed system

Science.gov (United States)

Reiter, Michael; Birman, Kenneth; Gong, LI

1992-01-01

A distributed security architecture is proposed for incorporation into group oriented distributed systems, and in particular, into the Isis distributed programming toolkit. The primary goal of the architecture is to make common group oriented abstractions robust in hostile settings, in order to facilitate the construction of high performance distributed applications that can tolerate both component failures and malicious attacks. These abstractions include process groups and causal group multicast. Moreover, a delegation and access control scheme is proposed for use in group oriented systems. The focus is the security architecture; particular cryptosystems and key exchange protocols are not emphasized.

Development of Production Systems

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

1997-01-01

This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

Role of joined farmer groups in enhancing production and farmers income

Science.gov (United States)

Arsyad, M.; Rahmadanih; Bulkis, S.; Hasnah; Sulili, A.; Darwis; Bustan, A.; Aswad, M.

2018-05-01

Production and farmers income still becomes a global issue in economic development. The study aims to (1) describe the implementation of the role of Joined farmer groups (called Gapoktan) in accordance its function and (2) to analyze the role of Gapoktan in increasing production and farming income. The study was conducted in Camba Sub District, Maros District, South Sulawesi, Indonesia in 2017 and choosing Aspana Gapoktan as Case Unit. Data collection is done by a combination of qualitative and quantitative methods. Qualitative data were collected by Focus Group Discussions method, indepth interview and document study while quantitative data was collected through survey method on 60 farmers respondents. The results showed that, (1) Aspana Gapoktan has implemented a role related to its function as a business unit in the provision of production facilities and farming as well as marketing but has not implemented roles related to its function as a processing business unit, and saving and loan (2) Gapoktan role in increasing production and income of farming is facilitating procurement of farm inputs and agricultural production tools for farmers and developing various commodities in farming activities, especially horticultural crops. More than 44.00% of farmers perceived that their production increased about 10.00% - 25.00% and more than 68.00% of farmers perceived that their income increased by about 10.00% - 25.00% for the last three years. It is necessary to increase the role of Gapoktan through (1) the procurement of horticultural product processing industry and (2) doing savings and loan activities by utilizing 40.00% of funds managed by Gapoktan or through the formation of cooperatives under the management of Gapoktan.

Wigner functions for a class of semi-direct product groups

International Nuclear Information System (INIS)

Krasowska, Anna E; Ali, S Twareque

2003-01-01

Following a general method proposed earlier, we construct here Wigner functions defined on coadjoint orbits of a class of semidirect product groups. The groups in question are such that their unitary duals consist purely of representations from the discrete series and each unitary irreducible representation is associated with a coadjoint orbit. The set of all coadjoint orbits (hence UIRs) is finite and their union is dense in the dual of the Lie algebra. The simple structure of the groups and the orbits enables us to compute the various quantities appearing in the definition of the Wigner function explicitly. A large number of examples, with potential use in image analysis, is worked out

Modelling Product Families for Product Configuration Systems with Product Variant Master

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

Production control system specified quality sausage products

Directory of Open Access Journals (Sweden)

A. V. Tokarev

2016-01-01

Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

Alkyne End Group Production in Polymeric Materials Induced by Swift Heavy Ion Irradiations

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

Swift heavy ions in matter lose energy mainly through electronic processes.Since the energy deposition is centered in a very small region with a very high energy density,new effects such as production of alkyne end group can be induced.In this work,PET,PS,PC and PI films are irradiated with Ar,Kr,Xe and U ions and the relationship of the alkyne end group production with electronic energy loss is studied by Fourier transformed infrared infrared(FTLR)spectra measurements.

Block Fusion Systems and the Center of the Group Ring

DEFF Research Database (Denmark)

Jacobsen, Martin Wedel

This thesis develops some aspects of the theory of block fusion systems. Chapter 1 contains a brief introduction to the group algebra and some simple results about algebras over a field of positive characteristic. In chapter 2 we define the concept of a fusion system and the fundamental property...... of saturation. We also define block fusion systems and prove that they are saturated. Chapter 3 develops some tools for relating block fusion systems to the structure of the center of the group algebra. In particular, it is proven that a block has trivial defect group if and only if the center of the block...... algebra is one-dimensional. Chapter 4 consists of a proof that block fusion systems of symmetric groups are always group fusion systems of symmetric groups, and an analogous result holds for the alternating groups....

The Areva Group; Le groupe Areva

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-08-01

This document provides information on the Areva Group, a world nuclear industry leader, offering solutions for nuclear power generation, electricity transmission and distribution and interconnect systems to the telecommunications, computer and automotive markets. It presents successively the front end division including the group business lines involved in producing nuclear fuel for electric power generation (uranium mining, concentration, conversion and enrichment and nuclear fuel fabrication); the reactors and services division which designs and builds PWR, BWR and research reactors; the back end division which encompasses the management of the fuel that has been used in nuclear power plants; the transmission and distribution division which provides products, systems and services to the medium and high voltage energy markets; the connectors division which designs and manufactures electrical, electronic and optical connectors, flexible micro circuitry and interconnection systems. Areva is implemented in Europe, north and south america, africa and asia-pacific. (A.L.B.)

White paper report from working groups attending the international conference on research and educational opportunities in bio-fuel crop production

Energy Technology Data Exchange (ETDEWEB)

Morgan, K.T. [University of Florida, Soil and Water Science Dep., Southwest Florida Res. and Educ. Center, Immokalee, FL 34142 (United States); Gilbert, R.A. [University of Florida, Agronomy Dep., Everglades Res. and Educ. Center, Belle Glade, FL 33430 (United States); Helsel, Z.A. [Rutgers University, Plant Biology and Pathology Dep., New Brunswick, NJ 08901-8520 (United States); Buacum, L. [University of Florida, Hendry County Extension, LaBelle, FL 33935 (United States); Leon, R.; Perret, J. [EARTH University, Apto. 4442-1000, San Jose (Costa Rica)

2010-12-15

A conference on current research and educational programs in production of crops for bio-fuel was sponsored and organized by the EARTH University and the University of Florida in November, 2008. The meeting addressed current research on crops for bio-fuel production with discussions of research alternatives for future crop production systems, land use issues, ethics of food vs. fuel production, and carbon sequestration in environmentally sensitive tropical and sub-tropical regions of the Americas. The need and potential for development of graduate and undergraduate curricula and inter-institutional cooperation among educational institutions in the region were also discussed. Delegations from Belize, Brazil, Columbia, Costa Rica, Cuba, Honduras, Panama, The Dominican Republic, and the United States including ministers of Agriculture and Energy attended this meeting. Over a two-day period, four working groups provided a framework to facilitate networking, motivate task oriented creative thinking, and maintain a timely accomplishment of assigned duties in the context of the conference themes. Participants in the conference were assigned to one of four working groups, each following given topics: Agronomy, Environment, Socio-Economics and Education/Extension. It was the consensus of representatives of industry, academic and regulatory community assembled in Costa Rica that significant research, education and socio-economic information is needed to make production of bio-fuel crops sustainable. Agronomic research should include better crop selection based on local conditions, improved production techniques, pest and disease management, and mechanical cultivation and harvesting. Another conclusion was that tailoring of production systems to local soil characteristics and use of bio-fuel by-products to improve nutrient use efficiency and reduction of environmental impact on water quantity and quality is critical to sustainability of bio-fuel crop production. (author)

Research on hydrogen production system

International Nuclear Information System (INIS)

Nakagiri, Toshio

2002-07-01

Hydrogen is closely watched for environmental issues in recent years. In this research, hydrogen production systems and production techniques are widely investigated, and selected some hydrogen production process which have high validity for FBR system. Conclusions of the investigation are shown below. (1) Water-electrolysis processes and steam reform processes at low temperatures are already realized in other fields, so they well be easily adopted for FBR system. FBR system has no advantage when compared with other systems, because water-electrolysis processes can be adopted for other electricity generation system. On the other hand, FBR system has an advantage when steam reforming processes at low temperatures will be adopted, because steam reforming processes at 550-600degC can't be adopted for LWR. (2) Thermochemical processes will be able to adopted for FBR when process temperature will be lowered and material problems solved, because their efficiencies are expected high. Radiolysis processes which use ray (for example, gamma rya) emitted in reactor can be generate hydrogen easily, so they will be able to be adopted for FBR if splitting efficiency will be higher. Further investigation and R and D to realize these processes are considered necessary. (author)

Pesticide Product Information System (PPIS)

Data.gov (United States)

U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...

Space system production cost benefits from contemporary philosophies in management and manufacturing

Science.gov (United States)

Rosmait, Russell L.

1991-01-01

The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

The adoption of domestic solar-power systems: Do consumers assess product attributes in a stepwise process?

International Nuclear Information System (INIS)

Faiers, Adam; Neame, Charles; Cook, Matt

2007-01-01

The adoption of an innovation is partly dependent on the consumers' perception of the product attributes, starting with the 'relative advantage' a product may have over another existing product, and also include issues of compatibility, complexity, observability and trialability. Using diffusion of innovations theory as a conceptual framework, this paper describes a case study that investigated the innovation adoption process that a group of identified potential adopters of domestic solar thermal systems stated they would follow. Data was generated from the results of a postal survey to a group of 43 defined innovators and a group of 350 assumed 'early majority', pragmatic consumers. The survey results showed that while the pragmatic customers did follow the process as theorised in diffusion theory, the innovators disregarded the observability attributes of the innovation and went ahead with implementation without having seen the products beforehand. The group of innovators was also split in their opinion that 'complexity' may be a limiting factor. There were differences in the pragmatic group between certain demographic sub groups. Conclusions are drawn on how the findings may impact marketing activities

Large and small sets with respect to homomorphisms and products of groups

Directory of Open Access Journals (Sweden)

Riccardo Gusso

2002-10-01

Full Text Available We study the behaviour of large, small and medium subsets with respect to homomorphisms and products of groups. Then we introduce the definition af a P-small set in abelian groups and we investigate the relations between this kind of smallness and the previous one, giving some examples that distinguish them.

Consultants Group Meeting on Production System Analysis and Economics for Tsetse Fly Mass-Rearing and the Use of the Sterile Insect Technique in Eradication Programmes in Africa

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-07-01

A consultants' group met in Vienna from 23 September - 3 October 1991 to explore 'Production System Analysis and Economics for Tsetse Fly Mass-rearing and the Use of the Sterile Insect Technique in Eradication Programmes in Africa'. This report is based on their observations during working visits to the Entomology Unit of the IAEA Agricultural Laboratory at Seibersdorf, and on information supplied by the tsetse team and staff of the Joint FAO/IAEA Division's Insect and Pest Control Section. The consultants conducted a technical, operational and financial review of present rearing methods, equipment, philosophies and production capacities, taking into account one of the recommendations made at the 6th Session of the ''FAO Commission on African Animal Trypanosomiasis'' held in June 1991 in Harare, Zimbabwe. This recommendation, related to the use of the Sterile Insect Technique (SIT), states that {sup F}AO, through the Joint FAO/IAEA Division, should further investigate and improve the use of sterile insects to strengthen the efficacy of tsetse surveys and, where applicable, consider teh use of the SIT to support eradication campaigns where other techniques on their own will not achieve this objective''. In investigating the potential for improved tsetse mass-rearing and analyzing the present costs of pupa/distributable sterile fly production, the consultants noted that: 1. The Seibersdorf Tsetse Unit is conducting an effective research and development programme which strives to emulate a production facility while continuing to pursue R and D. The capacity of the present facility in Seibersdorf is practically limited to a colony size of about 150,000 breeding females. The release of sterile males in an eradication campaign of economical relevance would require a colony containing more than 500,000 female flies. Such a population can only be maintained in an organizational, operational and financially justifiable manner if the rearing technology is transferred from an

Production System Design for Multiple Brands

DEFF Research Database (Denmark)

Karlsson, Christer; Christensen, Irene

Production systems enabling both cost efficiency and flexibility in terms of high product variation are explored. The study follows an explorative longitudinal field study approach. The database consists of three large global corporations, each consisting of several companies producing household ......-outs, worker skills, integration of distribution channels, after sales service and degree of servitization. Three production system design principles called VXY emerge....

The polymorphism of the Knops blood group system among five Chinese ethnic groups.

Science.gov (United States)

Li, Qin; Han, Sha-Sha; Guo, Zhong-Hui; Yang, Ying; Zhou, Jie; Zhu, Zi-Yan

2010-12-01

This work aims to explain the complexity of the Knops blood group system in the Chinese population. The Knops blood group system consists of antigens encoded by CR1 gene exon 29. A total of 281 individuals from the Han, Uigur, Tu, Lisu and Dong ethnic groups were studied. The coding region of the CR1 gene of 11 Han donors was analysed using reverse transcription-polymerase chain reaction (PCR) and sequencing. CR1 gene exon 29 in the 39 samples was analysed through genomic DNA sequencing. According to the sequencing result, a PCR-sequence-specific primers system was designed to screen the A4646G and A4870G alleles in the Chinese population. Twelve single nucleotide polymorphisms (SNPs) were observed in the coding region of the CR1 gene in the Han population. Two SNPs (A4646G and A4870G) were detected in the CR1 gene exon 29. The 4646G allele was found only in the Uigur and Tu ethnic groups, in which the allele frequencies were 0·11 and 0·06, respectively. The frequencies of the 4870A allele in the Han, Uigur, Tu, Lisu and Dong ethnic groups were 0·82, 0·83, 0·82, 0·57 and 0·57, respectively. The CR1 gene in the Chinese people is more conservative than that in the Caucasian or African people. Different Chinese ethnic groups may have their own different CR1 gene characteristics. The existence of 4646G in the Uigur and Tu ethnic groups suggests that both may carry certain Caucasian characteristics in the CR1 gene. The frequency of 4870G in the Lisu and Dong ethnic groups implies possible incidence of evolutionary pressure similar to what the Africans had experienced. © 2010 The Authors. Transfusion Medicine © 2010 British Blood Transfusion Society.

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

Directory of Open Access Journals (Sweden)

Mariia CHEREDNYCHENKO

2016-12-01

Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

A Classification Scheme for Production System Processes

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Brunø, Thomas Ditlev; Nielsen, Kjeld

2018-01-01

Manufacturing companies often have difficulties developing production platforms, partly due to the complexity of many production systems and difficulty determining which processes constitute a platform. Understanding production processes is an important step to identifying candidate processes...... for a production platform based on existing production systems. Reviewing a number of existing classifications and taxonomies, a consolidated classification scheme for processes in production of discrete products has been outlined. The classification scheme helps ensure consistency during mapping of existing...

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Building consensus in strategic decision-making : system dynamics as a group support system

NARCIS (Netherlands)

Vennix, J.A.M.

1995-01-01

System dynamics was originally founded as a method for modeling and simulating the behavior of industrial systems. In recent years it is increasingly employed as a Group Support System for strategic decision-making groups. The model is constructed in direct interaction with a management team, and

Building consensus in strategic decision-making : system dynamics as a group support system

OpenAIRE

Vennix, J.A.M.

1995-01-01

System dynamics was originally founded as a method for modeling and simulating the behavior of industrial systems. In recent years it is increasingly employed as a Group Support System for strategic decision-making groups. The model is constructed in direct interaction with a management team, and the procedure is generally referred to as group model-building. The model can be conceptual (qualitative) or a full-blown (quantitative) computer simulation model. In this article, a case is describe...

Potential of sustainable biomass production systems in Texas

International Nuclear Information System (INIS)

Sanderson, M.A.; Hussey, M.A.; Wiselogel, A.E.

1992-01-01

Biomass production for liquid fuels feedstock from systems based on warm-season perennial grasses (WSPG) offers a sustainable alternative for forage-livestock producers in Texas. Such systems also would enhance diversity and flexibility in current production systems. Research is needed to incorporate biomass production for liquid fuels, chemicals, and electrical power into current forage-livestock management systems. Our research objectives were to (i) document the potential of several WSPG in diverse Texas environments for biomass feedstock production, (ii) conduct fundamental research on morphological development of WSPG to enhance management for biomass feedstock production, (iii) examine current on-farm production systems for opportunities to incorporate biomass production, and (iv) determine feedstock quality and stability during storage

Influence of dispatching rules on average production lead time for multi-stage production systems.

Science.gov (United States)

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Toyota production system beyond large-scale production

CERN Document Server

Ohno, Taiichi

1998-01-01

In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

Systems evolution of waste and by-product management and bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Okkonen, L.

2009-07-01

Evolutionary economic geography provides an inspiring extension to geographical systems analysis. The objective of this dissertation is to apply the systems approach and theory as an integrative framework of sustainable development, and as a capable analytical tool in the analysis of evolutionary resource management and energy production systems in their geographical contexts. The systems investigated are waste and by-product management and bioenergy production systems located in Finland and Scotland. Industrial ecosystem (IE) indicators are constructed for the analysis of waste and by-product management. They present both direct and indirect environmental, economic and social impacts of local waste management operations. The indicators are further applied in scenarios that dynamise the evolution of systems material and energy flows towards the balanced environmental, economic and social development, i.e. the vision of the industrial ecology. The results indicate that the energy use of waste derived fuels in regional cooperation has much potential in the development towards the optimal roundput model of industrial ecosystem. The business opportunities based on local woodfuels are investigated in the context of Scottish forestry policy. The evolution of institutional environments and arrangements of forest management in the Scottish Highlands enables a new type of rural entrepreneurship. The case study of Finnish heat entrepreneurship constructs a heat energy business model, including both the business architecture for product/service flows and the earning logics. Finally, a synthesis of the evolution of natural resource management systems is presented. The evolution process has many geographical contingent conditions, such as resources, technologies, institutions and organisations. Together with general socio-economic mechanisms, they affect the actors in spatial economic processes and interactions. Realisations of the system evolution are structures of economies

Mini Tuber Production in Potato Via Aeroponic System

Directory of Open Access Journals (Sweden)

Hussein Abdullah Ahmed AHMED

2018-02-01

Full Text Available The aeroponic production system is one of the new applications in soilless agriculture. This system is also an alternative seed production system for mini-tuber production of potato in terms of providing optimum growth conditions, enabling potato production to be free from diseases and pests and to make economic use of agricultural inputs. This system, which is independent of climatic conditions, has the advantage of improving the vegetative growth, delaying tuber formation, prolonging the vegetative period, increasing the tuber yield per plant and total tuber yield while decreasing the tuber weight. Due to the problems experienced in potato seedling tuber production in recent years, it emerged as an alternative production system for our country.

Siparişe Dayalı Üretim İçin Ürün Gruplarının Oluşturulmasında Genetik Algoritma Tabanlı Bir Yaklaşım(Genetic Algorithm-Based Approach for Constructing Product Groups in Make-to-Order Production Environments

Directory of Open Access Journals (Sweden)

Şevkinaz GÜMÜŞOĞLU

2013-12-01

Full Text Available In today’s production environments in which there exist a cutthroat competition and continuous changes in demands needs of customers, enterprises have started to search for solutions to make their manufacturing systems flexible and profitable to keep up with these conditions. In make-to-order systems, the ambiguity in demands, range of products, different processing time of the pieces and the number of processes they go through cause a complex flow of manufacture. Especially for make-to-order production environments, product classifications and groupings are carried out to cope with planning difficulties and to maintain the flexibility. Product and machine classifications are handled within the context of group technology and cellular manufacturing. In this study, a novel product grouping approach is presented for organizing machines and providing the flexibility for the manufacturing processes based on genetic algorithm considering total processing times. The proposed approach supports the improvement in productivity and the deficiency in lateness.

A comparison of production system life cycle models

Science.gov (United States)

Attri, Rajesh; Grover, Sandeep

2012-09-01

Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

Managing complexity of product mix and production flow in configure-to-order production systems

DEFF Research Database (Denmark)

Myrodia, Anna; Bonev, Martin; Hvam, Lars

2014-01-01

In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components, or...

Conception of Self-Construction Production Scheduling System

Science.gov (United States)

Xue, Hai; Zhang, Xuerui; Shimizu, Yasuhiro; Fujimura, Shigeru

With the high speed innovation of information technology, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be reduced. This extraction mechanism should be applied for various production processes for the interoperability. Using the master information extracted by the system, production scheduling operators can be supported to accelerate the production scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, at first a model for expressing a scheduling problem is proposed. Then the guideline to extract the scheduling information and use the extracted information is shown and some applied functions are also proposed based on it.

The ATLAS Production System Evolution: New Data Processing and Analysis Paradigm for the LHC Run2 and High-Luminosity

CERN Document Server

AUTHOR|(SzGeCERN)677929; The ATLAS collaboration; Barreiro Megino, Fernando Harald; De, Kaushik; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Padolski, Siarhei; Wenaus, Torre

2017-01-01

The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS specific workflows, across more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resources utilization is one of the major features of the system, it didn’t exist in the earliest versions of the production system where Grid resources topology has been predefined using national or/and geographical pattern. Production System has a sophisticated job fault-recovery mechanism, which efficiently a...

TESS Ground System Operations and Data Products

Science.gov (United States)

Glidden, Ana; Guerrero, Natalia; Fausnaugh, Michael; TESS Team

2018-01-01

We describe the ground system operations for processing data from the Transiting Exoplanet Survey Satellite (TESS), highlighting the role of the Science Operations Center (SOC). TESS is a spaced-based (nearly) all-sky mission, designed to find small planets around nearby bright stars using the transit method. We detail the flow of data from pixel measurements on the instrument to final products available at the Mikulski Archive for Space Telescopes (MAST). The ground system relies on a host of players to process the data, including the Payload Operations Center at MIT, the Science Processing Operation Center at NASA Ames, and the TESS Science Office, led by the Harvard-Smithsonian Center for Astrophysics and MIT. Together, these groups will deliver TESS Input Catalog, instrument calibration models, calibrated target pixels and full frame images, threshold crossing event reports, two-minute light curves, and the TESS Objects of Interest List.

Development of anti-counterfeit consumer product authentication system

Directory of Open Access Journals (Sweden)

Olena V. Narimanova

2015-06-01

Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

[Bacteria of Lactobacillus casei group: characterization, viability as probiotic in food products and their importance for human health].

Science.gov (United States)

Buriti, Flávia Carolina Alonso; Saad, Susana Marta Isay

2007-12-01

Lactobacillus casei is a group of phenotypically and genetically heterogeneous lactic acid bacteria, able to colonize various natural and man-made environments. Strains of the Lactobacillus casei group have been widely studied with respect to their health-promoting properties. Several beneficial functions for the human organism have been attributed to regular consumption of food products containing these strains. Bacteria of the Lactobacillus casei group are of great interest for the food industry to improve food quality. A number of studies have been conducted in order to evaluate the viability of strains of Lactobacillus casei group as probiotic in dairy products, desserts, among others food products. Despite its importance for the food industry, the taxonomy of the Lactobacillus casei group is still unclear. This review discusses important studies related to characterization of strains of Lactobacillus casei group, the application of these bacteria as probiotic in different food products and the main beneficial effects attributed to regular consumption of products containing such microorganisms.

Nitrogen recycling and methane production using Gracilaria tikvahiae: a closed system approach

Energy Technology Data Exchange (ETDEWEB)

Habig, C.; Andrews, D.A.; Ryther, J.H.

1984-01-01

The macroalga Gracilaria tikvahiae (Rhodophyta) was used in a closed system of materials to study methane production and nitrogen recycling. Twenty liter carboys served as digesters. The performance of these digesters mirrors results obtained with two- and four litre Gracilaria digesters with respect to optimal retention times for biogas production, methane content, and bioconversion efficiency to methane. Three groups of Gracilaria were cultivated in 850-L vaults to compare growth performance under three different enrichment treatments. These treatments consisted of an unfertilized group, a group raised on a typical commercial enrichment regime, and a group raised on the residues removed from the digester when additional substrate was loaded into the digester. The results indicate that growth of Gracilaria on the digester residue enrichment scheme is statistically similar to growth using a commercial enrichment mixture. In addition, the nitrogen content of the digester residue is described, along with nitrogen assimilation by Gracilaria and nitrogen recycling efficiencies. Both nitrogen assimilation and recycling efficiency closely parallel the ammonium content of the residue enrichment media. (Refs. 18).

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

Extension of $b{sub f}$-continuous functions defined on a product of $b{sub f}$-groups

Energy Technology Data Exchange (ETDEWEB)

Sanchis, M.

2017-07-01

Let X be a bf -space and let G be a bf -group. By means of the exponential mapping we characterize when a bf -continuous function on X × G with values in a topologically complete sapce Z has a bf -continuous extension to β(X) × G. As a consequence we show that the product of a pseudocompact space and a bf -group is a bf -group. This result generalizes the fact that the product of a pseudocompact space and a pseudocompact group is pseudocompact. (Author)

Customized recommendations for production management clusters of North American automatic milking systems.

Science.gov (United States)

Tremblay, Marlène; Hess, Justin P; Christenson, Brock M; McIntyre, Kolby K; Smink, Ben; van der Kamp, Arjen J; de Jong, Lisanne G; Döpfer, Dörte

2016-07-01

Automatic milking systems (AMS) are implemented in a variety of situations and environments. Consequently, there is a need to characterize individual farming practices and regional challenges to streamline management advice and objectives for producers. Benchmarking is often used in the dairy industry to compare farms by computing percentile ranks of the production values of groups of farms. Grouping for conventional benchmarking is commonly limited to the use of a few factors such as farms' geographic region or breed of cattle. We hypothesized that herds' production data and management information could be clustered in a meaningful way using cluster analysis and that this clustering approach would yield better peer groups of farms than benchmarking methods based on criteria such as country, region, breed, or breed and region. By applying mixed latent-class model-based cluster analysis to 529 North American AMS dairy farms with respect to 18 significant risk factors, 6 clusters were identified. Each cluster (i.e., peer group) represented unique management styles, challenges, and production patterns. When compared with peer groups based on criteria similar to the conventional benchmarking standards, the 6 clusters better predicted milk produced (kilograms) per robot per day. Each cluster represented a unique management and production pattern that requires specialized advice. For example, cluster 1 farms were those that recently installed AMS robots, whereas cluster 3 farms (the most northern farms) fed high amounts of concentrates through the robot to compensate for low-energy feed in the bunk. In addition to general recommendations for farms within a cluster, individual farms can generate their own specific goals by comparing themselves to farms within their cluster. This is very comparable to benchmarking but adds the specific characteristics of the peer group, resulting in better farm management advice. The improvement that cluster analysis allows for is

Consumer attitudes to different pig production systems

DEFF Research Database (Denmark)

de Barcellos, Marcia Dutra; Grunert, Klaus G; Zhou, Yanfeng

2013-01-01

In many Western countries, consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers' attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies...... on Western consumers' attitudes to various forms of food production, little is known about the level of Chinese consumers' attitudes. A cross-sectional survey was carried out with 472 participants in six Chinese cities. Results indicate that Chinese consumers prefer industrial pig production systems, where...... from Cluster 1 focus almost exclusively on the food safety aspect (food safety focused). Consumers from cluster 2 (indifferent) show generally weak attitudes to pig production systems in general. Cluster 3 (industrial production oriented) stands out by being very positive about industrial, large size...

Measuring healthcare productivity - from unit to system level.

Science.gov (United States)

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

A Group Recommender System for Tourist Activities

Science.gov (United States)

Garcia, Inma; Sebastia, Laura; Onaindia, Eva; Guzman, Cesar

This paper introduces a method for giving recommendations of tourist activities to a group of users. This method makes recommendations based on the group tastes, their demographic classification and the places visited by the users in former trips. The group recommendation is computed from individual personal recommendations through the use of techniques such as aggregation, intersection or incremental intersection. This method is implemented as an extension of the e-Tourism tool, which is a user-adapted tourism and leisure application, whose main component is the Generalist Recommender System Kernel (GRSK), a domain-independent taxonomy-driven search engine that manages the group recommendation.

Toyota production system - one example to shipbuilding industry

OpenAIRE

Delmo Alves de Moura; Rui Carlos Botter

2017-01-01

The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line ...

Animal production systems in the industrialised world.

Science.gov (United States)

Sørensen, J T; Edwards, S; Noordhuizen, J; Gunnarsson, S

2006-08-01

The production of food from animal origin is relatively stable in the industrialised world. However, animal production systems are changing dramatically with respect to location, herd size and specialisation. Increased pressure from a critical public is moving animal-based production towards systems such as organic production and loose-housing systems which allow the animals to better express normal behaviour. The focus on food safety promotes systems with a high degree of biosecurity, often associated with an increase in herd size and self-containment. The globalisation of agricultural trade and increased competition also favours an increase in herd size and specialisation. These trends also lead to regions with livestock-dense areas, giving rise to environmental concerns. Therefore, good farming practice regulations and systems to provide a higher level of transparency, such as quality risk management programmes, are being developed.

Amenable crossed product Banach algebras associated with a class of C*-dynamical systems

NARCIS (Netherlands)

Jeu, de M.F.E.; Elharti, R.; Pinto, P.R.

2017-01-01

We prove that the crossed product Banach algebra ℓ1(G,A;α) that is associated with a C∗-dynamical system (A,G,α) is amenable if G is a discrete amenable group and A is a commutative or finite dimensional C∗-algebra. Perspectives for further developments are indicated.

Energy Systems Group. Annual Progress Report 1984

DEFF Research Database (Denmark)

Grohnheit, Poul Erik; Larsen, Hans Hvidtfeldt; Villadsen, B.

The report describes the work of the Energy Systems Group at Risø National Laboratory during 1984. The activities may be roughly classified as development and use of energy-economy models, energy systems analysis, energy technology assessment and energy planning. The report includes a list of staff...

Ruminant production systems in developing countries: Resource utilization

International Nuclear Information System (INIS)

Devendra, C.

1989-01-01

Ruminant production systems are discussed with specific reference to the resource utilization required to support them. Particular focus is placed on the main production resources (animals and feeds) and their underutilization. The ruminant animals include buffaloes, cattle, goats, sheep and camels. With the exception of cattle and sheep, their numbers in developing countries account for between 94 and 100% of total world population. Their biological attributes, including inherent characteristics, feeding behaviour and metabolism, are summarized. The extent and availability of feed resources are considered; resources include permanent pastures, crop residues, agroindustrial by-products and non-conventional feeds. The prevailing ruminant production systems are classified into three main categories: extensive systems, systems incorporating arable cropping (roadside, communal and arable grazing systems; tethering and cut-and-carry feeding), and systems integrated with tree cropping. Their genesis and endurance with patterns of crop production and farming systems are discussed. Integrated systems, involving animals and tree crops, are potentially important. Prevailing ruminant production systems are unlikely to change in the foreseeable future, unless there are major shifts in resource use and the proposed new systems are demonstrably superior. Factors likely to influence future ruminant production systems are market requirements, available feed resources and growth in human populations. Two associated strategies for improvement are proposed: increased priority to buffaloes, goats, sheep and camels, consistent with their potential contribution to meat, milk and fibre supplies and draught power; and more complete utilization of the available feed ingredients and increased feed supplies

Introduction of China's Compulsory Product Certification System (Ⅰ)

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

@@ Why does China establish a new Compulso-ry Product Certification System? For a long time, our compulsory product certification system has had problems such as lack of a unified management department, repeated assessments,repeated charging and no separation between certification activities and behaviors of law enforcement.The most obvious problem is that two certification management systems exist respectively for domestic products and imported products.

The ATLAS Production System Evolution. New Data Processing and Analysis Paradigm for the LHC Run2 and High-Luminosity

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration

2016-01-01

The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS specific workflows, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resources utilization is one of the major system’s features, it didn’t exist in the earliest versions of the production system, where Grid resources topology has been predefined using national or/and geographical pattern. Production System has a sophisticated job fault-recovery mechanism, which allows effici...

Identification of microorganisms associated with corrosion of offshore oil production systems

Science.gov (United States)

Sørensen, Ketil; Grigoryan, Aleksandr; Holmkvist, Lars; Skovhus, Torben; Thomsen, Uffe; Lundgaard, Thomas

2010-05-01

Microbiologically influenced corrosion (MIC) poses a major challenge to oil producers and distributors. The annual cost associated with MIC-related pipeline failures and general maintenance and surveillance of installations amounts to several billion dollar in the oil production sector alone. Hence, large efforts are undertaken by some producers to control and monitor microbial growth in pipelines and other installations, and extensive surveillance programs are carried out in order to detect and quantify potential MIC-promoting microorganisms. Traditionally, efforts to mitigate and survey microbial growth in oil production systems have focused on sulfate-reducing Bacteria (SRB), and microorganisms have usually been enumerated by the culture-dependent MPN (most probable number) -technique. Culture-independent molecular tools yielding much more detailed information about the microbial communities have now been implemented as a reliable tool for routine surveillance of oil production systems in the North Sea. This has resulted in new and hitherto unattainable information regarding the distribution of different microorganisms in hot reservoirs and associated oil production systems. This presentation will provide a review of recent insights regarding thermophilic microbial communities and their implication for steel corrosion in offshore oil production systems. Data collected from solids and biofilms in different corroded pipelines and tubes indicate that in addition to SRB, other groups such as methanogens and sulfate-reducing Archaea (SRA) are also involved in MIC. In the hot parts of the system where the temperature approaches 80 ⁰C, SRA closely related to Archaeoglobus fulgidus outnumber SRB by several orders of magnitude. Methanogens affiliated with the genus Methanothermococcus were shown to completely dominate the microbial community at the metal surface in a sample of highly corroded piping. Thus, the microbial communities associated with MIC appear to be more

TAXATION SYSTEM AT INTRA PRODUCTION LEVEL

Directory of Open Access Journals (Sweden)

L. I. Podderegina

2006-01-01

Full Text Available The paper presents results of the analysis concerning taxation in the country at the level of an enteфrise and its structural sub-divisions in the period of transforming economy.Recommendations are given on the following aspects: modernization of income taxation system for natural persons; tax payment in case of wage computation; exclusion of tax payments and assignments fi-om production cost value which are not connected with the production process; tax computation for real property; evaluation of enterprise taxation level.The paper shows the possible cases concerning formation of tax payments and assignments of an enterprise and its structural sub-divisions.Taxation system is shown at the level of enterprise structural sub-divisions (shop, department, at the level of shop structural sub-divisions (section, team, for works to be executed by an individual person of the production process (operation, product, works, services. This system promotes to efficient functioning of intra-production economical relations.The paper provides possible variants of formation of taxation payments and assignments for an enterprise and its structural sub-divisions.

Profitability indicators of milk production cost center in intensive systems of production

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2012-01-01

Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

Vegetable Production System (Veggie)

Data.gov (United States)

National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

The effects of team expert choice on group decision-making in collaborative new product development; a pilot study

NARCIS (Netherlands)

Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, G.

2000-01-01

This study analyses the effects of Team Expert Choice on group decision-making in collaborative new product development. We applied Team Expert Choice to support a product evaluation conducted by a new product development group composed of professionally diverse members. The evaluation resulted in

Energy Systems Group annual progress report 1984

International Nuclear Information System (INIS)

Grohnheit, P.E.; Larsen, H.; Villadsen, B.

1985-02-01

The report describes the work of the Energy Systems Group at Risoe National Laboratory during 1984. The activities may be roughly classified as development and use of energy-economy models, energy systems analysis, energy technology assessment and energy planning. The report includes a list of staff members. (author)

System-theoretic analysis of due-time performance in production systems

Directory of Open Access Journals (Sweden)

David Jacobs

1995-01-01

Full Text Available Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipment size. This performance index is analyzed for both lean and mass manufacturing environments. In particular, it is shown that, to achieve a high due-time performance in a lean environment, the production system should be scheduled for a sufficiently small fraction of its average production rate. In mass production, due-time performance arbitrarily close to one can be achieved for any scheduling practice, up to the average production rate.

Conceptual Modelling for Product Configuration Systems

DEFF Research Database (Denmark)

Shafiee, Sara

Individual customization of goods and processes in different industries leads to complexity due to a growing mix of products both regarding characteristics of products and support services. In order to eliminate complexity and challenges in product/process customizing, smart IT systems called...... Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...

Analyzing Lifestyle and Consumption Pattern of Hire Groups under Product Service Systems in Taiwan

Directory of Open Access Journals (Sweden)

Jui-Che Tu

2013-01-01

Full Text Available This study explores the characteristics of rental goods, integrates the green concept in the design and development, and introduces the concept of product service into the rental consumption trend in Taiwan. This study takes the questionnaire survey to collect various opinions of the consumers to rental consumption and also classifies the Taiwanese consumers into five clusters based on the life styles, and the names of clusters are simple financial management cluster, environment and taste cluster, fashionable and flexible cluster, careful purchase cluster, and smart consumption cluster. Finally, conclusions are as follows. (1 The green consumption cognition and attitude of the consumers to the environmental goods can help to master the factor of green consumption property for developing the rental commodities. (2 The market segmentation of the rental consumption market can be enhanced by the variables of available life styles. (3 The applications with product service rental characteristics should take the opinion feedback of the consumers into the sustainable product development conditions and expand the service property of the product. (4 As the cost of cradle-to-cradle recycling pattern is high, the support and promotion of the government can help to construct the business model of product service rental consumption and develop the rental economy.

Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

Science.gov (United States)

Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

Renormalization-group improved fully differential cross sections for top pair production

International Nuclear Information System (INIS)

Broggio, A.; Papanastasiou, A.S.; Signer, A.; Zuerich Univ.

2014-07-01

We extend approximate next-to-next-to-leading order results for top-pair production to include the semi-leptonic decays of top quarks in the narrow-width approximation. The new hard-scattering kernels are implemented in a fully differential parton-level Monte Carlo that allows for the study of any IR-safe observable constructed from the momenta of the decay products of the top. Our best predictions are given by approximate NNLO corrections in the production matched to a fixed order calculation with NLO corrections in both the production and decay subprocesses. Being fully differential enables us to make comparisons between approximate results derived via different (PIM and 1PI) kinematics for arbitrary distributions. These comparisons reveal that the renormalization-group framework, from which the approximate results are derived, is rather robust in the sense that applying a realistic error estimate allows us to obtain a reliable prediction with a reduced theoretical error for generic observables and analysis cuts.

Annual coded wire tag program (Washington) missing production groups : annual report 2000; ANNUAL

International Nuclear Information System (INIS)

Dammers, Wolf; Mills, Robin D.

2002-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded-wire Tag Program - Missing Production Groups for Columbia River Hatcheries'' project. The Washington Department of Fish and Wildlife (WDFW), Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time and to meet various measures of the Northwest Power Planning Council's (NWPPC) Fish and Wildlife Program. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries. Objective 1 for FY-00 was met with few modifications to the original FY-00 proposal. Under Objective 2, snouts containing coded-wire tags that were recovered during FY-00 were decoded. Under Objective 3, this report summarizes available recovery information through 2000 and includes detailed information for brood years 1989 to 1994 for chinook and 1995 to 1997 for coho

Simulation Based Optimization for World Line Card Production System

Directory of Open Access Journals (Sweden)

Sinan APAK

2012-07-01

Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

Design of Agricultural Cleaner Production Technology System

OpenAIRE

Hu, Jun-mei; Wang, Xin-jie

2009-01-01

Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

[The effect of hydrophobicity of group A beta-hemolytic streptococcus in the process of adherence and biofilm production ].

Science.gov (United States)

2014-01-01

Bacterial cell hydrophobicity and adherence to a substrate are one of the most important factors in biofilm formation. Group A streptococcus is an unstable and low biofilm productor. Importance of biofilm production in streptococcal pathogenesis is still unknown. The aim of this study was to determine the impact of hydrophobicity and adherence on the biofilm production of group A streptococcal invasive and noninvasive isolates, and also to evaluate the stability of biofilm production in time function. Adherence, hydrophobicity and biofilm production were investigated in a total of 172 isolates divided into three groups: noninvasive, low invasive and highly invasive. Adher- ence to uncoated and laminin-coated microtiter plates and biofilm production after 12, 24 and 48 hours of incubation was determined using the method described by Stepanović et al. Hydrophobicity was measured using the MATH test by Rosenberg and SAT test by Lindhal. Correlation between adherence and biofilm produc- tion was detected in the group of noninvasive isolates. These isolates were stable biofilm productors during all three time periods of biofilm production. In the groups of invasive and noninvasive isolates no statistical correlation was detected among the analysed variables. The invasive isolates were un- stable biofilm productors. Noninvasive isolates were stable biofilm producers; as detected, they showed a direct correlation between adherence and biofilm production, and a negative impact of hydrophobicity on the biofilm production. Invasive isolates were unstable biofilm productors; it was observed that there was no correlation between adherence and hydrophobicity with biofilm production.

Young adults' perceptions about established and emerging tobacco products: results from eight focus groups.

Science.gov (United States)

Wray, Ricardo J; Jupka, Keri; Berman, Susan; Zellin, Stacie; Vijaykumar, Santosh

2012-02-01

In order to sustain their market, tobacco producers target young adults through novel product design and marketing strategies. Public health professionals need to understand young adults' risks perceptions about and use of new tobacco products to best inform tobacco control interventions. In 2009, researchers conducted 8 focus groups with 67 young adults stratified by self-reported tobacco use and nonuse, residence in rural and urban areas, and living in a state with or without a statewide smoking restriction policy. Participants provided feedback about their knowledge and risk perceptions about and use of tobacco products and marketing. Participants reported a high level of familiarity with a wide range of novel tobacco products. A great deal of confusion and disagreement appeared with regard to absolute and relative risk of different tobacco products. Participants readily discussed using smokeless tobacco products as alternatives to smoking when smoking is prohibited. Fewer differences in tobacco-related knowledge risk perceptions and use were found between urban and rural participants and those in smoke-free policy and nonpolicy states than between user and nonuser groups. Both users and nonusers were familiar with and skeptical about tobacco marketing and prevention efforts. Young adults are familiar with many tobacco products, but they convey little understanding of relative risks of new or trendy tobacco products, such as snus or hookah. Mindful of industry innovation, tobacco control advocates must continuously update prevention efforts, seeking new strategies to limit promotion, marketing, and use of new and conventional products.

Group Recommendation Systems Based on External Social-Trust Networks

Directory of Open Access Journals (Sweden)

Guang Fang

2018-01-01

Full Text Available With the development of social networks and online mobile communities, group recommendation systems support users’ interaction with similar interests or purposes with others. We often provide some advices to the close friends, such as listening to favorite music and sharing favorite dishes. However, users’ personalities have been ignored by the traditional group recommendation systems while the majority is satisfied. In this paper, a method of group recommendation based on external social-trust networks is proposed, which builds a group profile by analyzing not only users’ preferences, but also the social relationships between members inside and outside of the group. We employ the users’ degree of disagreement to adjust group preference rating by external information of social-trust network. Moreover, having a discussion about different social network utilization ratio, we proposed a method to work for smaller group size. The experimental results show that the proposed method has consistently higher precision and leads to satisfactory recommendations for groups.

Milk Production in the Sylvopastoral Zone of Senegal: Variation Factors and Local Populations’ Management System

Directory of Open Access Journals (Sweden)

A. T. Diop

2009-01-01

Full Text Available In the Sahelian region of Senegal, milk production in pastoral systems is subjected to inter- and intra-annual variations because the animal feed is almost exclusively based on natural resources. Studies conducted from a monitoring set-up in pastoralist settlements and in station, and data from Nestle Company have shown that milk production was highly related to the milk collection date, but with a low correlation with the total amount of rainfall. The relationship between total milk production and the normalized difference vegetation index (NDVI was polynomial. The production peak was reached when the water content in forage was 70%. Surveys on pastoralists (men and women belonging to different ethnic groups and living in different production subsystems (Walo, Djoloff and Ferlo showed that the duration of lactation, number of cows and animal species were the main factors of variation of milk production. The actors in charge of milk production management differed depending on the ethnic group. Milk curdling and butter making were the two preserving methods used, and five types of gourds were used in the process. Dairy products still held a major place in farmers’ incomes and skim milk curd was the most marketed product.

System for extracting protein from a fermentation product

Science.gov (United States)

Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

2016-04-26

A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

Energy condensed packaged systems. Composition, production, properties

Directory of Open Access Journals (Sweden)

Igor L. Kovalenko

2015-03-01

Full Text Available In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids or on combinations thereof with petroleum products. And ceresin or petroleum wax can be used as the structuring additive. The influence of the technology of energy condensed systems production on the physicochemical and detonation parameters of emulsion explosives is considered. It is shown the possibility of obtaining of emulsion systems with dispersion of 1.3...1.8 microns and viscosity higher than 103 Pa∙s in the apparatus of original design. The sensitizing effect of chlorinated paraffin CP-470 on the thermolysis of energy condensed emulsion system is shown. The composition and production technology of energy condensed packaged emulsion systems of mark Ukrainit-P for underground mining in mines not dangerous on gas and dust are developed.

Renormalization Group Reduction of Non Integrable Hamiltonian Systems

International Nuclear Information System (INIS)

Tzenov, Stephan I.

2002-01-01

Based on Renormalization Group method, a reduction of non integratable multi-dimensional Hamiltonian systems has been performed. The evolution equations for the slowly varying part of the angle-averaged phase space density and for the amplitudes of the angular modes have been derived. It has been shown that these equations are precisely the Renormalization Group equations. As an application of the approach developed, the modulational diffusion in one-and-a-half degrees of freedom dynamical system has been studied in detail

Fish production and some traits of meat quality in rainbow trout (Oncorhynchus mykiss farmed in different production systems

Directory of Open Access Journals (Sweden)

St. Stoyanova

2016-12-01

Full Text Available Abstract. The rainbow trout (Oncorhynchus mykiss, an important species in Bulgarian aquaculture, is farmed in different production systems as raceways, net cages etc. The aim of the present study was to evaluate the effect of two different rearing systems on fish production, survival rate, meat chemical, mineral composition and farming economic efficiency of culticated rainbow trout (Oncorhynchus mykiss. The information from a survey on fish production and economic efficiency traits was collected from two national rainbow trout farms using the two commonest fish farming systems: in raceways, Happy Fish Ltd fish farm and in net cages, Forest Group Ltd fish farm. The average individual weight gain (g, total weight gain (kg, feed conversion ratio, production costs of 1 kg fish and the economic efficiency coefficients were determined for the two studied fish farms. The final live weight of rainbow trout in net cages was 0.30 kg vs 0.35 kg in raceways. The average individual weight gain was higher in raceways farming system (0.30 kg than in net cages farm (0.26 kg. The mortality rate of fish in raceways was considerably lower: only 1% as compared to that in net cages (4%. The feed conversion ratio at the end of the experiment showed identical values for trout in both farms 1.01. The meat water content of fish reared in raceways and net cages was 77.46±0.65% and 74.52±0.52% respectively (P≤0.01.The protein content of fish meat was higher in fish farmed in net cages 18.84±0.29% as compared to fish cultivated in raceways 17.60±0.49% (P 0.05. Meat fat content of rainbow trout, reared in the net cage system was also considerably higher (5.26±0.30% than the respective parameter in fish farmed in ponds (3.60±0.15% (P≤0.001. The content of Ca and P was higher in rainbow trouts reared in raceways (138.96±1.12 mg.kg and 2844.32±39.31 mg.kg 1 -1 -1 compared with the values of these parameters of fish in net cages (134.46±1.96 mg.kg and 2690.31±42

Sustainable Transportation Systems Research Group: Ongoing and Past Activities

OpenAIRE

Gkritza, Konstantina "Nadia"; Hurtado, Davis Chacon; Gkartzonikas, Christos; Ke, Yue; Losada, Lisa L

2017-01-01

This presentation describes the ongoing and past activities of the Sustainable Transportation Systems Research (STSR) group at Purdue University (https://engineering.purdue.edu/STSRG). The STSR group aims to achieve green, safe, efficient, and equitable transportation systems by studying and modeling transportation externalities, using state of the art statistical, econometric, and economic analysis tools.

Bioelectrochemical Systems for Indirect Biohydrogen Production

KAUST Repository

Regan, John M.

2014-01-01

Bioelectrochemical systems involve the use of exoelectrogenic (i.e., anode-reducing) microbes to produce current in conjunction with the oxidation of reduced compounds. This current can be used directly for power in a microbial fuel cell, but there are alternate uses of this current. One such alternative is the production of hydrogen in a microbial electrolysis cell (MEC), which accomplishes cathodic proton reduction with a slight applied potential by exploiting the low redox potential produced by exoelectrogens at the anode. As an indirect approach to biohydrogen production, these systems are not subject to the hydrogen yield constraints of fermentative processes and have been proven to work with virtually any biodegradable organic substrate. With continued advancements in reactor design to reduce the system internal resistance, increase the specific surface area for anode biofilm development, and decrease the material costs, MECs may emerge as a viable alternative technology for biohydrogen production. Moreover, these systems can also incorporate other value-added functionalities for applications in waste treatment, desalination, and bioremediation.

Production grid systems and their programming

CERN Document Server

Kacsuk, P; Stefan, P

2004-01-01

Summary form only given. There are a large variety of grid test-beds that can be used for experimental purposes by a small community. However, the number of production grid systems that can be used as a service for a large community is very limited. The current tutorial provides introduction to three of these very few production grid systems. They represent different models and policies of using grid resources and hence understanding and comparing them is an extremely useful exercise to everyone interested in grid technology. The Hungarian ClusterGrid infrastructure connects clusters during the nights and weekends. These clusters are used during the day for educational purposes at the Hungarian universities and polytechnics. Therefore, a unique feature of this grid is the switching mechanism by which the day time and night time working modes are loaded to the computers. In order to manage the system as a production, one, the system is homogeneous, all the machines should install the same grid software package...

Managing soil microbial communities in grain production systems through cropping practices

Science.gov (United States)

Gupta, Vadakattu

2013-04-01

Cropping practices can significantly influence the composition and activity of soil microbial communities with consequences to plant growth and production. Plant type can affect functional capacity of different groups of biota in the soil surrounding their roots, rhizosphere, influencing plant nutrition, beneficial symbioses, pests and diseases and overall plant health and crop production. The interaction between different players in the rhizosphere is due to the plethora of carbon and nutritional compounds, root-specific chemical signals and growth regulators that originate from the plant and are modulated by the physico-chemical properties of soils. A number of plant and environmental factors and management practices can influence the quantity and quality of rhizodeposition and in turn affect the composition of rhizosphere biota communities, microbe-fauna interactions and biological processes. Some of the examples of rhizosphere interactions that are currently considered important are: proliferation of plant and variety specific genera or groups of microbiota, induction of genes involved in symbiosis and virulence, promoter activity in biocontrol agents and genes correlated with root adhesion and border cell quality and quantity. The observation of variety-based differences in rhizodeposition and associated changes in rhizosphere microbial diversity and function suggests the possibility for the development of varieties with specific root-microbe interactions targeted for soil type and environment i.e. designer rhizospheres. Spatial location of microorganisms in the heterogeneous field soil matrix can have significant impacts on biological processes. Therefore, for rhizosphere research to be effective in variable seasonal climate and soil conditions, it must be evaluated in the field and within a farming systems context. With the current focus on security of food to feed the growing global populations through sustainable agricultural production systems there is a

Wireless sensing on surface hydrocarbon production systems

International Nuclear Information System (INIS)

Kane, D; McStay, D; Mulholland, J; Costello, L

2009-01-01

The use of wireless sensor networks for monitoring and optimising the performance of surface hydrocarbon production systems is reported. Wireless sensor networks are shown to be able to produce comprehensively instrumented XTs and other equipment that generate the data required by Intelligent Oilfield systems. The information produced by such systems information can be used for real-time operational control, production optimization and troubleshooting.

INVESTIGATION OF BRAND NAME-COUNTRY OF ORIGIN PREFERENCE IN FOUR DIFFERENT PRODUCT GROUPS WITH RESPECT TO CONSPICUOUS CONSUMPTION TENDENCY

Directory of Open Access Journals (Sweden)

Volkan Doğan

2013-10-01

Full Text Available The aim of this study is to examine different preferences for brand name–country of origin shaped in line with levels of conspicuous consumption tendency and to determine Turkish consumers’ preferences for brand name–country of origin combinations in different product groups. The study was conducted in Eskisehir (Turkey with a sample of 413 people chosen through convenience sampling. The study data were collected with a questionnaire and face-face-to interviews. The participants’ preferences for brand name-country of origin combinations were determined separately based on four different product groups(hedonic, utilitarian, durable and non-durable. The study showed that, for all the four product groups, the participants preferred the products with a Turkish brand name and Turkey as the country of origin most, followed by the products with a French brand name and France as the country of origin. This finding suggests that, with respect to the four product groups in the study, Turkish consumers preferred domestic products over foreign products. Also, the participants who preferred French brand name-France as the country of origin for the hedonic product, French brand name-Turkey as the country of origin for the utilitarian product, French brand name-Turkey as the country of origin for the durable product and French brand name-France as the country of origin for the non-durable product were found to have highest tendency of conspicuous consumption in the corresponding product groups. In other words, as the level of conspicuous consumption increased, the participants tended to prefer French brand name-France as the country of origin for the hedonic product, French brand name-Turkey as the country of origin for the utilitarian product, French brand name-Turkey as the country of origin for the durable product and French brand name-France as the country of origin for the non-durable product.

Photochemical hydrogen production system

International Nuclear Information System (INIS)

Copeland, R.J.

1990-01-01

Both technical and economic factors affect the cost of producing hydrogen by photochemical processes. Technical factors include the efficiency and the capital and operating costs of the renewable hydrogen conversion system; economic factors include discount rates, economic life, credit for co-product oxygen, and the value of the energy produced. This paper presents technical and economic data for a system that generates on-peak electric power form photochemically produced hydrogen

Hydrate prevention in petroleum production sub sea system

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Paula L.F.; Rocha, Humberto A.R. [Universidade Estacio de Sa (UNESA), Rio de Janeiro, RJ (Brazil); Rodrigues, Antonio P. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

2012-07-01

In spite of the merits of the several hydrate prevention techniques used nowadays, such as: chemical product injection for inhibition and use of thick thermal insulate lines; hydrates per times happen and they are responsible for considerable production losses. Depressurization techniques can be used so much for prevention as in the remediation. Some hydrate removal techniques need a rig or vessel, resources not readily available and with high cost, reason that limits such techniques just for remediation and not for prevention. In the present work it is proposed and described an innovative depressurization system, remote and resident, for hydrate prevention and removal, applicable as for individual sub sea wells as for grouped wells by manifold. Based on low cost jet pumps, without movable parts and with a high reliability, this technique allows hydrate prevention or remediation in a fast and remote way, operated from the production unit. The power fluid line and fluid return line can be integrated in the same umbilical or annulus line structure, without significant increase in the construction costs and installation. It is not necessary to wait for expensive resource mobilization, sometimes not available quickly, such as: vessels or rigs. It still reduces the chemical product consumption and permits to depressurized stopped lines. Other additional advantage, depressurization procedure can be used in the well starting, removing fluid until riser emptying. (author)

Modeling of Agile Intelligent Manufacturing-oriented Production Scheduling System

Institute of Scientific and Technical Information of China (English)

Zhong-Qi Sheng; Chang-Ping Tang; Ci-Xing Lv

2010-01-01

Agile intelligent manufacturing is one of the new manufacturing paradigms that adapt to the fierce globalizing market competition and meet the survival needs of the enterprises, in which the management and control of the production system have surpassed the scope of individual enterprise and embodied some new features including complexity, dynamicity, distributivity, and compatibility. The agile intelligent manufacturing paradigm calls for a production scheduling system that can support the cooperation among various production sectors, the distribution of various resources to achieve rational organization, scheduling and management of production activities. This paper uses multi-agents technology to build an agile intelligent manufacturing-oriented production scheduling system. Using the hybrid modeling method, the resources and functions of production system are encapsulated, and the agent-based production system model is established. A production scheduling-oriented multi-agents architecture is constructed and a multi-agents reference model is given in this paper.

Medical student perceptions of factors affecting productivity of problem-based learning tutorial groups: does culture influence the outcome?

Science.gov (United States)

Das Carlo, Mandira; Swadi, Harith; Mpofu, Debbie

2003-01-01

The popularization of problem-based learning (PBL) has drawn attention to the motivational and cognitive skills necessary for medical students in group learning. This study identifies the effect of motivational and cognitive factors on group productivity of PBL tutorial groups. A self-administered questionnaire was completed by 115 students at the end of PBL tutorials for 4 themes. The questionnaire explored student perceptions about effect of motivation, cohesion, sponging, withdrawal, interaction, and elaboration on group productivity. We further analyzed (a) differences in perceptions between male and female students, (b) effect of "problems," and (c) effect of student progress over time on group productivity. There were linear relations between a tutorial group's success and the factors studied. Significant differences were noted between male and female student groups. Students and tutors need to recognize symptoms of ineffective PBL groups. Our study emphasizes the need to take into account cultural issues in setting ground rules for PBL tutorials.

Survey on the life cycle system of a product with shared information; Joho kyoyugata product life cycle system ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report provides and proposes new concept and optimization technology on the life cycle system of product for emission minimum. For the proposed life cycle system of product with shared information, the global emission minimum is realized by considering the final emission, the information is given to the product and shared in all the life cycle system, the information sending function is considered from the product, and the information necessary for material processing are actively used. For this life cycle system of product, development of the information model for the system, development of the technology of data saving, renewing, searching and sending, development of sensing and re-using technologies of the product for life cycle, development of the technology attaching information in the product for emission minimum, design of the guidelines of material composition, and research and development of materials for emission minimum are extracted and provided as tasks. 26 refs., 69 figs., 8 tabs.

Towards unification of product and enterprise system descriptions

CSIR Research Space (South Africa)

Erasmus, J

2015-06-01

Full Text Available are utilised by enterprises and some product systems contain entire businesses, such as the operating and maintenance business of a power station. Thus, products are part of enterprises, but enterprises may also be part of product systems. To enable the design...

Linking environment-productivity trade-offs and correlated uncertainties: Greenhouse gas emissions and crop productivity in paddy rice production systems

International Nuclear Information System (INIS)

Hayashi, Kiyotada; Nagumo, Yoshifumi; Domoto, Akiko

2016-01-01

In comparative life cycle assessments of agricultural production systems, analyses of both the trade-offs between environmental impacts and crop productivity and of the uncertainties specific to agriculture such as fluctuations in greenhouse gas (GHG) emissions and crop yields are crucial. However, these two issues are usually analyzed separately. In this paper, we present a framework to link trade-off and uncertainty analyses; correlated uncertainties are integrated into environment-productivity trade-off analyses. We compared three rice production systems in Japan: a system using a pelletized, nitrogen-concentrated organic fertilizer made from poultry manure using closed-air composting techniques (high-N system), a system using a conventional organic fertilizer made from poultry manure using open-air composting techniques (low-N system), and a system using a chemical compound fertilizer (conventional system). We focused on two important sources of uncertainties in paddy rice cultivation—methane emissions from paddy fields and crop yields. We found trade-offs between the conventional and high-N systems and the low-N system and the existence of positively correlated uncertainties in the conventional and high-N systems. We concluded that our framework is effective in recommending the high-N system compared with the low-N system, although the performance of the former is almost the same as the conventional system. - Highlights: • Correlated uncertainties were integrated into environment-productivity trade-offs. • Life cycle GHG emissions and crop yields were analyzed using field and survey data. • Three rice production systems using chemical or organic fertilizers were compared. • There were portfolio (insurance) effects in matured technologies. • Analysis of trade-offs and correlated uncertainties will be useful for decisions.

Linking environment-productivity trade-offs and correlated uncertainties: Greenhouse gas emissions and crop productivity in paddy rice production systems

Energy Technology Data Exchange (ETDEWEB)

Hayashi, Kiyotada, E-mail: hayashi@affrc.go.jp [Institute for Agro-Environmental Sciences, National Agriculture and Food Research Organization, 3-1-3 Kannondai, Tsukuba, Ibaraki 305-8604 (Japan); Nagumo, Yoshifumi [Crop Research Center, Niigata Agricultural Research Institute, 857 Nagakura-machi, Nagaoka, Niigata 940-0826 (Japan); Domoto, Akiko [Mie Prefecture Agricultural Research Institute, 530 Kawakita-cho, Ureshino, Matsusaka, Mie 515-2316 (Japan)

2016-11-15

In comparative life cycle assessments of agricultural production systems, analyses of both the trade-offs between environmental impacts and crop productivity and of the uncertainties specific to agriculture such as fluctuations in greenhouse gas (GHG) emissions and crop yields are crucial. However, these two issues are usually analyzed separately. In this paper, we present a framework to link trade-off and uncertainty analyses; correlated uncertainties are integrated into environment-productivity trade-off analyses. We compared three rice production systems in Japan: a system using a pelletized, nitrogen-concentrated organic fertilizer made from poultry manure using closed-air composting techniques (high-N system), a system using a conventional organic fertilizer made from poultry manure using open-air composting techniques (low-N system), and a system using a chemical compound fertilizer (conventional system). We focused on two important sources of uncertainties in paddy rice cultivation—methane emissions from paddy fields and crop yields. We found trade-offs between the conventional and high-N systems and the low-N system and the existence of positively correlated uncertainties in the conventional and high-N systems. We concluded that our framework is effective in recommending the high-N system compared with the low-N system, although the performance of the former is almost the same as the conventional system. - Highlights: • Correlated uncertainties were integrated into environment-productivity trade-offs. • Life cycle GHG emissions and crop yields were analyzed using field and survey data. • Three rice production systems using chemical or organic fertilizers were compared. • There were portfolio (insurance) effects in matured technologies. • Analysis of trade-offs and correlated uncertainties will be useful for decisions.

The international probabilistic system assessment group. Background and results 1990

International Nuclear Information System (INIS)

1991-01-01

The OECD Nuclear Energy Agency (NEA) devotes considerable effort to the further development of methodologies to assess the performance of radioactive waste disposal systems, and to increase confidence in their application and results. The NEA provides an international forum for the exchange of information and experience among national experts of its twenty-three Member countries and conducts joint studies of issues important for safety assessment. In 1985, the NEA Radioactive Waste Management Committee set up the Probabilistic System Assessment Code User Group (PSAC), in order to help coordinate the development of probabilistic system assessment codes. The activities of the Group include exchange of information, code and experience, discussion of relevant technical issues, and the conduct of code comparison (PSACOIN) exercises designed to build confidence in the correct operation of these tools for safety assessment. The Group is now known simply as the Probabilistic System Assessment Group (PSAG). This report has been prepared to inform interested parties, beyond the group of specialists directly involved, about probabilistic system assessment techniques as used for performance assessment of waste disposal systems, and to give a summary of the objectives and achievements of PSAG. The report is published under the responsibility of the Secretary General of the OECD

Limits of commutative triangular systems on locally compact groups

Indian Academy of Sciences (India)

Commutative triangular systems of probability measures on locally compact groups have been studied extensively and ... in [S3,S4], we extend our earlier result to some particular triangular systems on algebraic groups. We also discuss ..... Now G can be embedded as a closed subgroup in. G2 ¼ G1=D and G0. 2 ¼ ًG0 آ ...

Ventilation system for 99Mo production apparatus

International Nuclear Information System (INIS)

Izumo, Mishiroku; Okane, Shougo; Sorita, Takami; Aoyama, Saburou

1978-04-01

In production of 20 Ci 99 Mo from 235 U fission, about 120 Ci of radioiodine ( 131 I, 132 I, and 133 I) is involved. To remove airborne radioiodine from the exhaust air from production apparatus and minimize radioiodine release to the atmosphere, the ventilation system is equipped with 2 units of Model-FD charcoal filter (KI 3 -Impregnated charcoal 2 inch thick of Barnebey-Cheney Co.). From September 1976 to December 1977, 21 runs of 99 Mo production involving airborne radioiodine were carried out. The ventilation system was operated continuously for the whole 15 months period; variation in removal efficiency of airborne radioiodine from the exhaust air stream was observed. In the runs valuable experiences were gained in operation and maintenance of the ventilation system including activated charcoal filter and health-physics management of such facility. Following are the results: (1) Airborne radioiodine from 99 Mo production apparatus is reduced to 10 -3 % of the original quantity. (2) When the ventilation system is operated at a maximum air flow rate through the filter, the average efficiency during 15 months is over 98%. (3) Airborne radioiodine released from 99 Mo production apparatus to the ventilation system is less than 5% particulate iodine and alkyl iodines and more than 95% inorganic iodine. (4) Airborne radioiodine released from the stack is less than 28 μCi/run, which is below the limit in regulations on Radioisotope Production Laboratory. (auth.)

Expected energy production evaluation for photovoltaic systems

DEFF Research Database (Denmark)

Ding, Yi; Østergaard, Jacob; Peng, Wang

2011-01-01

A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

21 CFR 864.9175 - Automated blood grouping and antibody test system.

Science.gov (United States)

2010-04-01

...) Identification. An automated blood grouping and antibody test system is a device used to group erythrocytes (red blood cells) and to detect antibodies to blood group antigens. (b) Classification. Class II (performance... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated blood grouping and antibody test system...

PLM system support for modular product development

DEFF Research Database (Denmark)

Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

2015-01-01

A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...

Earthquake early Warning ShakeAlert system: West coast wide production prototype

Science.gov (United States)

Kohler, Monica D.; Cochran, Elizabeth S.; Given, Douglas; Guiwits, Stephen; Neuhauser, Doug; Hensen, Ivan; Hartog, Renate; Bodin, Paul; Kress, Victor; Thompson, Stephen; Felizardo, Claude; Brody, Jeff; Bhadha, Rayo; Schwarz, Stan

2017-01-01

Earthquake early warning (EEW) is an application of seismological science that can give people, as well as mechanical and electrical systems, up to tens of seconds to take protective actions before peak earthquake shaking arrives at a location. Since 2006, the U.S. Geological Survey has been working in collaboration with several partners to develop EEW for the United States. The goal is to create and operate an EEW system, called ShakeAlert, for the highest risk areas of the United States, starting with the West Coast states of California, Oregon, and Washington. In early 2016, the Production Prototype v.1.0 was established for California; then, in early 2017, v.1.2 was established for the West Coast, with earthquake notifications being distributed to a group of beta users in California, Oregon, and Washington. The new ShakeAlert Production Prototype was an outgrowth from an earlier demonstration EEW system that began sending test notifications to selected users in California in January 2012. ShakeAlert leverages the considerable physical, technical, and organizational earthquake monitoring infrastructure of the Advanced National Seismic System, a nationwide federation of cooperating seismic networks. When fully implemented, the ShakeAlert system may reduce damage and injury caused by large earthquakes, improve the nation’s resilience, and speed recovery.

Sutherland models for complex reflection groups

International Nuclear Information System (INIS)

Crampe, N.; Young, C.A.S.

2008-01-01

There are known to be integrable Sutherland models associated to every real root system, or, which is almost equivalent, to every real reflection group. Real reflection groups are special cases of complex reflection groups. In this paper we associate certain integrable Sutherland models to the classical family of complex reflection groups. Internal degrees of freedom are introduced, defining dynamical spin chains, and the freezing limit taken to obtain static chains of Haldane-Shastry type. By considering the relation of these models to the usual BC N case, we are led to systems with both real and complex reflection groups as symmetries. We demonstrate their integrability by means of new Dunkl operators, associated to wreath products of dihedral groups

Charter for Systems Engineer Working Group

Science.gov (United States)

Suffredini, Michael T.; Grissom, Larry

2015-01-01

This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

PRODUCTIVITY AND TICK LOAD IN Bos Indicus X B. taurus CATTLE IN A TROPICAL DRY FOREST SILVOPASTORAL SYSTEM

Directory of Open Access Journals (Sweden)

Raquel Sofía Salazar Benjumea

2015-04-01

Full Text Available Rhipicephalus (Boophilus microplus ticks cause significant economic losses to the Colombian cattle sector: reduction in meat and milk production, blood losses and transmission of blood parasites. The degree of infestation depends on the breed, physiological state and nutrition of the animal and on microclimatic characteristics, which affect the tick life cycle. Diverse studies suggest that given the characteristics of intensive silvopastoral systems (ISS, tick loads within these systems are lower. In this study, the tick loads of grazing animals were monitored for five animal groups: three at an ISS and two at traditional farms located on the Valley of Ibague (Tolima. within the ISS, there were greater tick loads in high production cows (P = 0.026 and a positive relationship (P < 0.05 between milk production and tick load in August sampling. Greater tick counts were also observed in the in San Javier (traditional farm group compared to all other animal groups. We conclude that the dynamics of ticks is a complex phenomenon affected by many factors, whose association determines the observed tick population at any given time.

Review of Lean Construction Conference Proceedings and Relationship to the Toyota Production System Framework

Science.gov (United States)

Jacobs, Gideon Francois

2010-01-01

The objective of this study was to align the International Group of Lean Construction (IGLC) conference proceedings against the Toyota Production System (TPS) to determine how well research themes in construction studies align with the TPS framework. Factories around the world that have implemented the TPS framework have experienced impressive…

Maximising methane production in stressed fermentation systems for swine production units

Energy Technology Data Exchange (ETDEWEB)

Hill, D T

1984-01-01

For economic reasons, digestion systems must be designed to allow the most compact plant. This forces heavy organic loading and relatively short detention times. Consequently, the digestion system is operating in the region approaching instability. An investigation into the effects on methane productivity of the method used to load anaerobic digesters has shown that when operating in regions approaching stress the method of loading plays a major role in maximising energy output. Since the digestion system is designed for steady-state loading, while the actual operating conditions are dynamic, the loading of the system actually varies greatly and is never at steady state. In loading the digestion system, two methods are available. Either Volatile Solids (VS) loading concentration will vary and loading volume remain constant or loading volume will vary and VS loading concentration remain constant. The choice of which operational method is used in a digestion system already operating under heavy loading greatly affects methane productivity. The internal energy usage of the plant also is affected. Results indicate that gross methane production is approximately 33% higher and VS reduction is increased by 28% for the fermentation plant operating with a varying detention time when compared to operating the same plant with a varying loading concentration. (Refs. 14).

The role of enterprise asset management system in the PVO group`s business

Energy Technology Data Exchange (ETDEWEB)

Jaervinen, J [RAMSE Consulting Oy, Helsinki (Finland)

1999-12-31

This presentation describes the role of the Enterprise Asset Management (EAM) and Enterprise Document Management (EDM) in the PVO Group`s business. The use of the functionality of the EAM (Immpower) and EDM (Documentum) is not limited only to the plant maintenance. All power plants and some other business functions and units will use the system in the future for financial management, activity based costing, purchasing, of materials, office supplies and fuel, invoice matching, project budgeting and costing, real estate management etc. The technical service concept of IT solution is also described in this presentation. The Information Management Strategy development as background to the project is also outlined together with the company information. The benefits of the common EAM system and related business process needs are also described. (orig.)

The role of enterprise asset management system in the PVO group`s business

Energy Technology Data Exchange (ETDEWEB)

Jaervinen, J. [RAMSE Consulting Oy, Helsinki (Finland)

1998-12-31

This presentation describes the role of the Enterprise Asset Management (EAM) and Enterprise Document Management (EDM) in the PVO Group`s business. The use of the functionality of the EAM (Immpower) and EDM (Documentum) is not limited only to the plant maintenance. All power plants and some other business functions and units will use the system in the future for financial management, activity based costing, purchasing, of materials, office supplies and fuel, invoice matching, project budgeting and costing, real estate management etc. The technical service concept of IT solution is also described in this presentation. The Information Management Strategy development as background to the project is also outlined together with the company information. The benefits of the common EAM system and related business process needs are also described. (orig.)

Introducing diagnosis-related groups: is the information system ready?

Science.gov (United States)

Jian, Weiyan; Lu, Ming; Han, Wei; Hu, Mu

2016-01-01

Diagnosis-related group (DRG) system is a classification system widely used in health managements, the foundation of which lies in the medical information system. A large effort had been made to improve the quality of discharge data before the introduction of DRGs in Beijing. We extract discharge data from 108 local hospitals spanning 4 years before and after standardization to evaluate the impact of standardization on DRG grouping performance. The data was grouped on an annual basis in accordance with Beijing's local DRG system. Proportion of ungrouped data, coefficient of variation (CV) and reduction in variance (RIV) were used to measure the performance of the DRG system. Both the descriptive and regression analysis indicate a significant reduction in terms of ungrouped data and CV for expenditure, increase of RIV for expenditure and length of stay. However, when there was no intervention, that is, between 2005 and 2006 and between 2008 and 2009, changes in these indicators were all insignificant. Therefore, the standardization of discharge data did improve data quality and consequently enhanced the performance of DRGs. Developing countries with a relatively weak information infrastructure should strengthen their medical information system before the introduction of the DRG system. Copyright © 2014 John Wiley & Sons, Ltd.

Glocalized Production - A Holistic Approach for Future Manufacturing at The LEGO Group

DEFF Research Database (Denmark)

Hadar, Ronen

2014-01-01

) and Rapid Manufacturing (RM). RMS is a manufacturing system that is designed for rapid changes. It is based on core characteristics such as modularity, convertibility, customized flexibility, etc.. RM is the use of Additive Manufacturing (AM –commonly referred to as 3D printing) for the production......Global production is changing. Changes in production paradigms, global competition, manufacturing technologies, and new mega trends such as individualization, inflict immense challenges on global manufacturers. A new holistic approach for facing supply chain and production challenges is proposed...... facilities, the establishment of production close to main markets, and the creation of a global network of independent factories and supply chains with local manufacturing. Doing so will potentially increase responsiveness, cut transportation costs, reduce complexity, enable production to demand rather than...

Customized Pull Systems for Single-Product Flow Lines

NARCIS (Netherlands)

Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

1998-01-01

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

Self-expression, group affiliation, pleasure and memory as predictors of consumer product attachment and satisfaction among mobile phone users

Directory of Open Access Journals (Sweden)

Kagiso Tlhabano

2013-03-01

Full Text Available In the post-purchase behaviour of a product, there are challenges with change in the degree of consumer product attachment, and these challenges affect consumer product satisfaction overtime. This study investigated how self-expression, group affiliation, memory, and demographic variables predicted consumer product attachment and satisfaction among mobile phone users in Ibadan. Three hundred students of the University of Ibadan were selected using convenient random selection. Their mean age was 20.7 and standard deviation of 2.52. A structured questionnaire consisting of the socio demographic section, measure of self-expression, group affiliation, memory, pleasure, consumer attachment and product satisfaction was used to collect the data. Using multiple regression analysis, the results showed that self-expression, group affiliation, memories and pleasure jointly predicted consumer attachment among mobile phone users, F (4,299 = 48.47; P<0.05 and they contributed 40% to the variance of consumer attachment. Self-expression (β = 0.26, t = 4.44, P<0.05, memory (β = 0.29, t = 4.97, P<0.05, and pleasure (β = 0.28, t =5.01, P<0.05 independently predicted consumer attachment while group affiliation did not. In addition, self- expression, group affiliation, memories and pleasure jointly predicted product satisfaction, F (4,299 =39.79; P<0.05 and they contributed 35% to the variance of product satisfaction. Pleasure (β=0.596, t =10.35, P<0.05 independently predicted product satisfaction while self-expression, group affiliation and memory did not. Furthermore, age, gender, mobile type, ethnicity and religion did not jointly and independently predict consumer product satisfaction. These findings have implication for mobile phone manufacturers in terms of product improvement and building a strategic marketing channel that would meet the needs of global consumers.

Summary of the target-blanket breakout group

Energy Technology Data Exchange (ETDEWEB)

Capiello, M.; Bell, C. [Los Alamos National Laboratory, NM (United States); Barthold, W.

1995-10-01

This breakout group discussed a number of topics and issues pertaining to target and blanket concepts for accelerator-driven systems. This major component area is one marked by a broad spectrum of technical approaches. It is therefore less defined than other major component areas such as the accelerator and is at an earlier stage of technical needs and task specification. The working group did reach a number of general conclusions and recommendations that are summarized. The Conference and the Target/Blanket Breakout Group provided a first opportunity for people working on a variety of missions and concepts to get together and exchange information. A number of subcritical systems applicable for a spectrum of missions were proposed at the Conference and discussed in the Breakout Group. Missions included plutonium disposition, energy production, waste destruction, isotope production, and neutron scattering. The Target/Blanket Breakout Group also defined areas where parameters and data should be addressed as target/blanket design activities become more detailed and sophisticated.

Quantum Phase Transitions in Conventional Matrix Product Systems

Science.gov (United States)

Zhu, Jing-Min; Huang, Fei; Chang, Yan

2017-02-01

For matrix product states(MPSs) of one-dimensional spin-1/2 chains, we investigate a new kind of conventional quantum phase transition(QPT). We find that the system has two different ferromagnetic phases; on the line of the two ferromagnetic phases coexisting equally, the system in the thermodynamic limit is in an isolated mediate-coupling state described by a paramagnetic state and is in the same state as the renormalization group fixed point state, the expectation values of the physical quantities are discontinuous, and any two spin blocks of the system have the same geometry quantum discord(GQD) within the range of open interval (0,0.25) and the same classical correlation(CC) within the range of open interval (0,0.75) compared to any phase having no any kind of correlation. We not only realize the control of QPTs but also realize the control of quantum correlation of quantum many-body systems on the critical line by adjusting the environment parameters, which may have potential application in quantum information fields and is helpful to comprehensively and deeply understand the quantum correlation, and the organization and structure of quantum correlation especially for long-range quantum correlation of quantum many-body systems.

A system dynamics model to determine products mix

Directory of Open Access Journals (Sweden)

Mahtab Hajghasem

2014-02-01

Full Text Available This paper presents an implementation of system dynamics model to determine appropriate product mix by considering various factors such as labor, materials, overhead, etc. for an Iranian producer of cosmetic and sanitary products. The proposed model of this paper considers three hypotheses including the relationship between product mix and profitability, optimum production capacity and having minimum amount of storage to take advantage of low cost production. The implementation of system dynamics on VENSIM software package has confirmed all three hypotheses of the survey and suggested that in order to reach better mix product, it is necessary to reach optimum production planning, take advantage of all available production capacities and use inventory management techniques.

Implementation of a system of social accounting in the cooperative of agricultural production “Camilo Cienfuegos” and in the basic unit of cooperative production “Julian Alemán". Main results

Directory of Open Access Journals (Sweden)

Yamira Mirabal González

2014-12-01

• To determine the results of the implementation of the System of Social Accounting in the Cooperative of Agricultural Production “Camilo Cienfuegos” and in the Basic Unit of Cooperative Production “Julián Alemán”.    The main results of the investigation are centered in: Characterization of the administration of the Cooperative of Agricultural Production “Camilo Cienfuegos” and of the Basic Unit of Cooperative Production “Julián Alemán”, evaluation of the level of execution of a group of premises that you/they allow the implementation of the system and the results of the implementation of the System of Social Accounting in both cooperatives.

Expert system for estimating LWR plutonium production

International Nuclear Information System (INIS)

Sandquist, G.M.

1988-01-01

An Artificial Intelligence-Expert System called APES (Analysis of Proliferation by Expert System) has been developed and tested to permit a non proliferation expert to evaluate the capability and capacity of a specified LWR reactor and PUREX reprocessing system for producing and separating plutonium even when system information may be limited and uncertain. APES employs an expert system coded in LISP and based upon an HP-RL (Hewlett Packard-Representational Language) Expert System Shell. The user I/O interface communicates with a blackboard and the knowledge base which contains the quantitative models required to describe the reactor, selected fission product production and radioactive decay processes, Purex reprocessing and ancillary knowledge

MILK PRODUCTION IN INTEGRATED SYSTEMS: REVIEW

Directory of Open Access Journals (Sweden)

H. A. Z. Biavatti

2014-09-01

Full Text Available The pasture degradation and thermic stress are in economic trouble for milk producers. The use of silvopastoral system (SSP is an important tool to minimize this loss, since it combines the production and conservation of natural resources, furthermore, provides the producer the potential to diversify the source of income of rural property, it is possible sale or own use of the products generated by the trees as timber, firewood and fruit. With the implementation of the SSP is possible to attenuate the effects of high temperatures caused by direct solar incidence on the animals, providing an ideal thermal comfort zone, resulting in increased production, it will expend less energy so that the animals are able to be as close as possible the necessary thermal comfort. Besides, with the adoption of this system, occurs a minor pasture degradation by promoting the formation of a microclimate favoring their establishment and maintenance, in addition to stabilizing soils, unpacked action of roots and preventing erosion. The purpose of this work was study the main aspects that affect the production of milk, proposing the use of integrated systems to minimize losses from thermal stress and degradation of pastures.

Toyota production system - one example to shipbuilding industry

Directory of Open Access Journals (Sweden)

Delmo Alves de Moura

2017-09-01

Full Text Available The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line context, it amounts to striving for economies of scope, rather than economies of scale ideally serving ever smaller niche markets, even quantities of one, without the high cost traditionally associated with customization. A lean company may be thought of as a very productive and cost efficient producer of goods or services.

Penicillin tolerance among Beta-hemolytic streptococci and production of the group carbohydrates, hemolysins, hyaluronidases and deoxyribonucleases

Directory of Open Access Journals (Sweden)

Cássia C. Avelino

1995-08-01

Full Text Available Penicillin tolerance among 67 strains of beta-hemolytic streptococci was examined by determining the ratio of the minimal bactericidal concentration to the minimal inhibitory concentration as 32 or greater. Tolerance was demonstrated in 15 group A strains and in 11,7, and 4 of groups B, C and G, respectively. Thereafter the effects of a subminimal inhibitory concentration (1/2MIC of penicillin on the bacterial products of four tolerant and four nontolerant strains (two of each Lancefield group were analyzed and compared. The antibiotic caused a marked increase in the expression of the group carbo-hydrates for strains of group B. Penicillin was found to reduce the cell-bound hemolysin activities of the four tolerant strains and to increase the activity of the other (free form of nontolerant groups A, C and G hemolysins. Penicillin caused an increase in the extracellular hyaluronidase activities of one group A and groups B, C and G streptococci. With added antibiotic the production of deoxyribonuclease by tolerant groups A, C and G was greatly enhanced and that of the group B streptococcus was arrested.

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Evaluation of drop versus trickle-feeding systems for crated or group-penned gestating sows.

Science.gov (United States)

Hulbert, L E; McGlone, J J

2006-04-01

A total of 160 gilts were used to evaluate the effects of pen vs. crated housing systems and drop- vs. trickle-fed feeding systems on sow productivity, occurrence of lesions during farrowing and weaning, immune measures, and behavioral responses during 2 consecutive gestation periods. Of the 160 eligible gilts, 117 farrowed in parity 1, and of those, 72 farrowed in parity 2. The gilts were randomly assigned to represent 1 of 4 factorially arranged treatment groups: pen drop-fed, crate drop-fed, pen trickle-fed, or crate trickle-fed. Replicate blocks were used for each parity with 5 sows per block initially in each treatment. At weaning, sows housed in pens had greater (P trickle-feeding system. Lesions scores and all other productivity measures did not differ among treatments. An interaction was observed for percentage of neutrophil phagocytosis (P trickle-fed sows, but in crates, drop-fed sows had a tendency for lower phagocytosis than trickle-fed sows. All other immune measures were not different among treatments. The occurrence of oral-nasal-facial (ONF) behaviors (chewing, rooting, and rubbing) and active behaviors increased, and lying behavior decreased (P trickle-feeding systems. None of the environments evaluated were associated with significant physiological stress responses among the sows. Thus, sows were able to adapt within each environment through behavioral mechanisms without the need to invoke major physiological adjustments.

Diversity and evolution of Lactobacillus casei group isolated from fermented dairy products in Tibet.

Science.gov (United States)

Feng, Jing; Jiang, Yujun; Li, Mingyu; Zhao, Siyu; Zhang, Yanming; Li, Xuesong; Wang, Hui; Lin, Guangen; Wang, Hao; Li, Tiejing; Man, Chaoxin

2018-05-25

Bacteria in Lactobacillus casei group, including Lactobacillus casei (L. casei), Lactobacillus paracasei (L. paracasei), and Lactobacillus rhamnosus (L. rhamnosus) are important lactic acid bacteria in the production of fermented dairy products and are faced with the controversial nomenclatural status due to their close phylogenetic similarity. To probe the evolution and phylogeny of L. casei group, 100 isolates of lactic acid bacteria originated from naturally fermented dairy products in Tibet of China were subjected to multilocus sequence typing (MLST). The MLST scheme, based on analysis of the housekeeping genes fusA, ileS, lepA, leuS, pyrG, recA and recG, revealed that all the isolates belonged to a group containing the L. paracasei reference strains and were clearly different from the strains of L. casei and L. rhamnosus. Although nucleotide diversity (π) was low for the seven genes (ranging from 0.00341 for fusA to 0.01307 for recG), high genetic diversity represented by 83 sequence types (STs) with a discriminatory index of 0.98 was detected. A network-like structure based on split decomposition analysis, and the high values of the relative effect of recombination and mutation in the diversification of the lineages (r/m = 4.76) and the relative frequency of occurrence of recombination and mutation (ρ/θ = 2.62) indicated that intra-species recombination occurred frequently and homologous recombination played a key role in generating genotypic diversity amongst L. paracasei strains in Tibet. The discovery of 51 new STs and the results of STRUCTURE analysis suggested that the L. casei group in Tibet had an individual and particular population structure in comparison to European isolates. Overall, this research might be the first report about genetic diversity and population structure of Lactobacillus populations isolated from naturally fermented dairy products in Tibet based on MLST scheme.

Production components and yield of bushing snap bean in conventional and organic production systems

Directory of Open Access Journals (Sweden)

Guilherme Renato Gomes

2017-10-01

Full Text Available Production systems influence crops differently, mainly in terms of yield. However, there are few studies that have evaluated different bushing snap bean genotypes in different systems. Thus, this study aimed to evaluate the production components and yield of bushing snap beans in conventional and organic production systems. The experimental design was a randomized complete block, in a factorial 6 × 2 arrangement, corresponding to six genotypes and two production systems, with three replications. The genotypes Isla Manteiga Baixo®, Isla Macarrão Baixo®, Feltrin Vicenza Amarelo Baixo®, and Feltrin Macarrão Napoli®, UEL 1, and UEL 2 were submitted to the following determinations: days to flowering; plant height; medium number of pods per plant; average pod mass, length, and diameter; and yield of commercial pods. A joint analysis of variance was conducted by applying the F test, with mean comparison performed using the Tukey’s test (p < 0.05. Anthesis of the genotypes Feltrin Vicenza Amarelo Baixo, UEL 2, Isla Macarrão Baixo, and Feltrin Macarrão Napoli is anticipated in the conventional production system. The genotype UEL 2 shows higher precocity in anthesis within the conventional system. The genotypes Isla Manteiga Baixo and UEL 1 produce more pods per plant in the conventional system. In the organic system, the genotype Feltrin Macarrão Napoli produces double the number of pods per plant compared with Isla Manteiga Baixo. The organic system leads to greater plant height and average mass, length, and diameter of pods in relation to the conventional system. The commercial pod yield of bushing snap bean is not altered by differences in the production system or genotype.

On the Steinhaus and Bergman properties for infinite products of finite groups

Czech Academy of Sciences Publication Activity Database

Thomas, S.; Zapletal, Jindřich

2012-01-01

Roč. 4, č. 2 (2012), s. 1250002 ISSN 1793-7442 R&D Projects: GA AV ČR IAA100190902 Institutional research plan: CEZ:AV0Z10190503 Keywords : ultrafilters * products of finite groups * automatic continuity Subject RIV: BA - General Mathematics http://www.worldscientific.com/doi/abs/10.1142/S1793744212500028

The integrated control of production-inventory systems

NARCIS (Netherlands)

Nyen, van P.L.M.

2005-01-01

In this thesis, we investigate a multi-product, multi-machine production-inventory (PI) system that is characterized by: ?? relatively high and stable demand; ?? uncertainty in the precise timing of demand; ?? variability in the production process; ?? job shop routings; ?? considerable setup times

Independence and Product Systems

OpenAIRE

Skeide, Michael

2003-01-01

Starting from elementary considerations about independence and Markov processes in classical probability we arrive at the new concept of conditional monotone independence (or operator-valued monotone independence). With the help of product systems of Hilbert modules we show that monotone conditional independence arises naturally in dilation theory.

Evaluation of pig production practices, constraints and opportunities for improvement in smallholder production systems in Kenya.

Science.gov (United States)

Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

2015-02-01

This study evaluated pig production practices by smallholder farmers in two distinct production systems geared towards addressing their constraints and prospects for improvement. The production systems evaluated were semi-intensive and extensive and differed in remoteness, market access, resource availability and pig production intensity. Data were collected using structured questionnaires where a total of 102 pig farmers were interviewed. Qualitative and quantitative research methods were employed to define the socioeconomic characteristics of the production systems, understanding the different roles that pigs play, marketing systems and constraints to production. In both systems, regular cash income and insurance against emergencies were ranked as the main reasons for rearing pigs. Marketing of pigs was mainly driven by the type of production operation. Finances, feeds and housing were identified as the major constraints to production. The study provides important parameters and identifies constraints important for consideration in design of sustainable production improvement strategies. Feeding challenges can be improved through understanding the composition and proper utilization of local feed resources. Provision of adequate housing would improve the stocking rates and control mating.

NOAA Soil Moisture Products System (SMOPS) Daily Blended Products

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Soil Moisture Operational Products System (SMOPS) combines soil moisture retrievals from multiple satellite sensors to provide a global soil moisture map with...

Large scale wind energy conversion system (WECS) design and installation as affected by site wind energy characteristics, grouping arrangement, and social acceptance. [Sweden

Energy Technology Data Exchange (ETDEWEB)

Ljungstrom, O

1977-01-01

The Swedish wind energy prospecting program includes special features of determining site wind characteristics and design of WECS group stations, which are described briefly, such as applications of normalized WDP-Wind Duration Profiles, WHP-Wind Height Profiles and how these are affected by site location and terrain roughness. A set of WEC-Wind Energy Classes (1 to 4) is introduced as an aid in territorial wind energy surveys. A survey of Sweden's WEPA-Wind Energy Producing Areas--with associated distribution over WEC-2-4 is presented. In order to determine the corresponding wind energy production capacity, the problem of optimizing WECS group station design for cost effective energy production per land usage must be solved. Here, the effects of WECS unit size and spacing on specific annual energy production, TWh/km/sup 2/, yr, are analyzed with the use of specific group station models in the 40 to 100 MW capacity range, applying WECS unit sizes 50kW, 1 MW and 5 MW, studying the energy balance for typical group stations. By applying the specific productivity data for 1 to 5 MW systems, a survey of the WEPA-associated wind energy production capacity in Sweden is presented.

HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

International Nuclear Information System (INIS)

McPhee, William S.

1999-01-01

The objective of this project is to improve the productivity and lower the expense of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCBs, and lead-based paint and provides worker protection by continuously recycling the material and dust for the decontamination tasks. The proposed work would increase the cleaning rate and provide safe and cost-effective decontamination of the DOE sites. This work focuses on redesigning and improving existing vacuum blasting technology including blast head nozzles, ergonomic handling of the blast head by reducing its weight; brush-ring design, vacuum level regulator, efficiency of the dust separator, and operational control sensors. The redesign is expected to enhance the productivity and economy of the vacuum blasting system by at least 50% over current vacuum blasting systems. There are three phases in the project. Phase I consists of developing and testing mathematical models. Phase II consists of pre-prototype design and fabrication and pre-prototype unit testing. Phase III consists of prototype design and field verification testing. In phase I, mathematical models are developed and analyzed for the nozzle, blast head, wind curtain, and dust separator, first as individual devices and then combined as an integrated model. This allows study of respective airflow and design parameters. The Contractor shall, based on the results of the mathematical modeling studies, design experimental models of the components and test these models. In addition, the Contractor shall develop sensors to detect the relationship of the blast head to the blast surfaces and controls to minimize the dependency on an operator's skill and judgment to obtain optimum positioning, as well as real-time characterization sensors to determine as the blast head is moving the depth to which coatings must be removed, thereby improving production and minimizing waste. In phase II, the Contractor shall design and

Production Flexibility in Extensive Beef Farming Systems

Directory of Open Access Journals (Sweden)

Laura Astigarraga

2011-03-01

Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

The Coordinates of Co-Production in the Educational Services System

Directory of Open Access Journals (Sweden)

Jivan Alexandru

2017-06-01

Full Text Available The paper proposes a certain delimitation of the concepts of cooperation and co-production in services and aims to apply them concretely in education, related to the connections (cooperation between offeror and beneficiary. The article is part of a wider plan that seeks to implement the legitimacy of using the notion of co-production in all sectors of activity, whether it is the one of goods or services to designate cooperative relationships between producer and consumer or, as we like to say, between the offeror and the beneficiary. The article starts with the definition and clarification of the concept of co-production. After briefly setting several conceptual aspects, an applied analysis is performed on a group of respondents from education, using a questionnaire developed to provide adequate information for the purposes set forth: some relationships between the influence factors of the co-production between teacher and student are analysed. The questionnaire allows us to share interesting conclusions regarding the reasons that make people to participate. An analysis of the logic behind the co-production phenomenon is offered, reserves for the improvement of such relations being revealed for the education system. The conclusions following the data analysis confirm the initial assumptions and reveal interesting aspects, as described in the final section.

Interactive augmented reality system for product design review

Science.gov (United States)

Caruso, Giandomenico; Re, Guido Maria

2010-01-01

The product development process, of industrial products, includes a phase dedicated to the design review that is a crucial phase where various experts cooperate in selecting the optimal product shape. Although computer graphics allows us to create very realistic virtual representations of the products, it is not uncommon that designers decide to build physical mock-ups of their newly conceived products because they need to physically interact with the prototype and also to evaluate the product within a plurality of real contexts. This paper describes the hardware and software development of our Augmented Reality design review system that allows to overcome some issues related to the 3D visualization and to the interaction with the virtual objects. Our system is composed by a Video See Through Head Mounted Display, which allows to improve the 3D visualization by controlling the convergence of the video cameras automatically, and a wireless control system, which allows us to create some metaphors to interact with the virtual objects. During the development of the system, in order to define and tune the algorithms, we have performed some testing sessions. Then, we have performed further tests in order to verify the effectiveness of the system and to collect additional data and comments about usability and ergonomic aspects.

Using a group decision support system to make investment prioritisation decisions

OpenAIRE

Read, Martin; Gear, Tony; Minkes, Leonard; Irving, Ann

2013-01-01

This paper is concerned with how decision making groups involved in making investment prioritisation decisions involving funding of technology and science projects may be supported by a group decision support system (GDSS). While interested in decision outcomes, the primary focus of this paper is the role of a group support system as an aid to developing shared understanding within a group. The paper develops the conceptual framework of decision-making, communication and group support, and de...

Design of material management system of mining group based on Hadoop

Science.gov (United States)

Xia, Zhiyuan; Tan, Zhuoying; Qi, Kuan; Li, Wen

2018-01-01

Under the background of persistent slowdown in mining market at present, improving the management level in mining group has become the key link to improve the economic benefit of the mine. According to the practical material management in mining group, three core components of Hadoop are applied: distributed file system HDFS, distributed computing framework Map/Reduce and distributed database HBase. Material management system of mining group based on Hadoop is constructed with the three core components of Hadoop and SSH framework technology. This system was found to strengthen collaboration between mining group and affiliated companies, and then the problems such as inefficient management, server pressure, hardware equipment performance deficiencies that exist in traditional mining material-management system are solved, and then mining group materials management is optimized, the cost of mining management is saved, the enterprise profit is increased.

ON A REDUCED CROSSED PRODUCT OF A GROUP BY A C*-ALGEBRA. THE CASES OF CONTINUOUS TRACE AND TYPE I REDUCED CROSSED PRODUCT

OpenAIRE

Daniel Tudor

2014-01-01

This paper analyzes two special cases of C* -algebras, the cases of universal crossed product and reduced crossed product of a group by a C* -algebra. In the hypothesis that the universal crossed product is a continuous trace C* -algebra or a type I C* -algebra, it is proved that the reduced crossed product is a continuous trace C* -algebra or, respectively, a type I C* -algebra. Moreover, these results can be extended in the case when the crossed products are obtained from a groupoid an...

Support System Model for Value based Group Decision on Roof System Selection

Directory of Open Access Journals (Sweden)

Christiono Utomo

2011-02-01

Full Text Available A group decision support system is required on a value-based decision because there are different concern caused by differing preferences, experiences, and background. It is to enable each decision-maker to evaluate and rank the solution alternatives before engaging into negotiation with other decision-makers. Stakeholder of multi-criteria decision making problems usually evaluates the alternative solution from different perspective, making it possible to have a dominant solution among the alternatives. Each stakeholder needs to identify the goals that can be optimized and those that can be compromised in order to reach an agreement with other stakeholders. This paper presents group decision model involving three decision-makers on the selection of suitable system for a building’s roof. The objective of the research is to find an agreement options model and coalition algorithms for multi person decision with two main preferences of value which are function and cost. The methodology combines value analysis method using Function Analysis System Technique (FAST; Life Cycle Cost analysis, group decision analysis method based on Analytical Hierarchy Process (AHP in a satisfying options, and Game theory-based agent system to develop agreement option and coalition formation for the support system. The support system bridges theoretical gap between automated design in construction domain and automated negotiation in information technology domain by providing a structured methodology which can lead to systematic support system and automated negotiation. It will contribute to value management body of knowledge as an advanced method for creativity and analysis phase, since the practice of this knowledge is teamwork based. In the case of roof system selection, it reveals the start of the first negotiation round. Some of the solutions are not an option because no individual stakeholder or coalition of stakeholders desires to select it. The result indicates

Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems

Directory of Open Access Journals (Sweden)

Matt Sinclair

2018-06-01

Full Text Available Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

Studies for Improving Productive Efficiency and Immune System Response of Aged Female Japanese Quail

International Nuclear Information System (INIS)

Sabek, E.M.E.

2012-01-01

The present study was performed in animal house Nuclear Research Center-Atomic Energy Authority at Inshas. The objective of this study was to overcome decrease productive efficiency and immune system response as a result of advanced of female Japanese quail (Coturnix Coturnix japonica) and multiple the production period of females studying the effect of three methods of force rest and their effect on physiological and endocrinological changes associated with each of procedure used. Three hundred birds were used, 240 female and 120 males (50 weeks of age). Females were at 44% hen day (HD) egg production. The birds randomly divided into four groups, 60 females and 30 males in each treatment which divided into three replicate of 20 females and 10 males in each. The first group was fed a layer diet, plus 2% zinc oxide (20,000 ppm) for 14 days. The second group was fed a commercial layer diet containing 8 mg / birds / day tamoxifen for 14 days. The third group was force molted by the California method (fed withdrawal by removing the diet 10 days then feed for 7 days corn). The fourth group fed the layer diet and served as the control. The results obtained showed significant increase in body weight, egg production, egg weight, shell weight, hatchability percent, fertility percent, embryonic mortality percent, hatching weight percent mortality percent, carcass relative weight, kidney relative weight, intestine relative weight, intestine length, proventriculus relative weight, ovary relative weight, oviduct relative weight, oviduct length, femur breaking strength, tibia breaking strength, packed cell volume, globulin, phosphorus concentration, triglyceride, estrogen hormone, aldosterone hormone and significant decrease in heart relative weight, albumin to globulin ratio, GOT, testosterone hormone, T 3 , T 4 , Heamaglutination inhibition test in treated groups than control group. While gizzard relative weight, femur relative weight, tibia relative weight, femur ash, tibia

Prevalence of food production systems in school foodservice.

Science.gov (United States)

Brown, Denise M

2005-08-01

What is the prevalence of central kitchens that use either cook-chill or cook-freeze production systems in school foodservice settings? A descriptive study using a 5-minute telephone survey during normal working hours was conducted. Questions were designed to be easily answered with minimal need to reference other documentation. Five hundred forty school foodservice directors, managers, and supervisors working in school districts of all sizes across the United States were randomly sampled from a national commercial directory of school districts for the study. A total of 353 individuals completed the survey representing 49 of 50 states. Means, standard deviations, and percentages were evaluated for all data collected. Descriptive statistics of school district characteristics, prevalence of production systems, food transport systems, inventory methods and equipment used for reheating food are reported. The most frequently reported production system was on-site kitchens (45.3%) followed by combination production systems (40.5%) where a central kitchen delivered to a number of satellite locations in addition to schools with on-site food preparation. Central kitchens without additional on-site kitchens represented 14.2% of this study. Of those school districts using either central kitchens or combination production systems, 78% reported hot-food preparation using hot-food delivery to satellites. Cook-chill or cook-freeze production systems were reported by 22% of respondents. The high proportion of school districts that prepared and delivered foods hot to satellite sites supports continuing efforts to identify food safety practices and issues related to maintaining food quality in schools.

Management systems, control and motivation methods used at enterprises groups

OpenAIRE

Leugaudaitė, Dalia

2017-01-01

MANAGEMENT SYSTEMS, CONTROL AND MOTIVATION METHODS USED AT ENTERPRISES GROUPS 69 pages, 3 tables, 25 pictures, 39 literature references. The aim of the Master's paper is to determine the implementation impact of the motivation and controlling methods to achieve efficiency in management systems. As a result of the scientific literature analysis, the advantages and disadvantages of the management systems were selected. These statements were used for the primary survey of the initial group of co...

A Land Product Characterization System for Comparative Analysis of Satellite Data and Products

Directory of Open Access Journals (Sweden)

Kevin Gallo

2017-12-01

Full Text Available A Land Product Characterization System (LPCS has been developed to provide land data and products to the community of individuals interested in validating space-based land products by comparing them with similar products available from other sensors or surface-based observations. The LPCS facilitates the application of global multi-satellite and in situ data for characterization and validation of higher-level, satellite-derived, land surface products (e.g., surface reflectance, normalized difference vegetation index, and land surface temperature. The LPCS includes data search, inventory, access, and analysis functions that will permit data to be easily identified, retrieved, co-registered, and compared statistically through a single interface. The system currently includes data and products available from Landsat 4 through 8, Moderate Resolution Imaging Spectroradiometer (MODIS Terra and Aqua, Suomi National Polar-Orbiting Partnership (S-NPP/Joint Polar Satellite System (JPSS Visible Infrared Imaging Radiometer Suite (VIIRS, and simulated data for the Geostationary Operational Environmental Satellite (GOES-16 Advanced Baseline Imager (ABI. In addition to the future inclusion of in situ data, higher-level land products from the European Space Agency (ESA Sentinel-2 and -3 series of satellites, and other high and medium resolution spatial sensors, will be included as available. When fully implemented, any of the sensor data or products included in the LPCS would be available for comparative analysis.

Corrosion products in power generating systems

International Nuclear Information System (INIS)

Lister, D.H.

1980-06-01

The important mechanisms of corrosion and corrosion product movement and fouling in the heat transport systems of thermal electric generating stations are reviewed. Oil- and coal-fired boilers are considered, along with nuclear power systems - both direct and indirect cycle. Thus, the fireside and waterside in conventional plants, and the primary coolant and steam-raising circuits in water-cooled reactors, are discussed. Corrosion products in organic- and liquid-metal-cooled reactors also are shown to cause problems if not controlled, while their beneficial effects on the cooling water side of condensers are described. (auth)

Some aspects of preparation and testing of group constants group constant system ABBN-90

International Nuclear Information System (INIS)

Nikolaev, M.N.; Tsiboulia, A.M.; Manturov, G.N.

1996-01-01

This paper presents an overview of activities performed to prepare and test the group constants ABBN-90. The ABBN-90 set is designed for application calculations of fast, intermediate and thermal nuclear reactors. The calculations of subgroup parameters are discussed. The processing code system GRUCON is mentioned in comparison to the NJOY code system. Proposals are made for future activities. (author). Figs, tabs

Crossed product algebras associated with topological dynamical systems

NARCIS (Netherlands)

Svensson, Pär Christian

2009-01-01

We study connections between topological dynamical systems and associated algebras of crossed product type. We derive equivalences between structural properties of a crossed product and dynamical properties of the associated system and furthermore derive qualitative results concerning the crossed

Annual coded wire tag program (Washington) missing production groups: annual report for 1997; ANNUAL

International Nuclear Information System (INIS)

Byrne, J.; Fuss, H.; Ashbrook, C.

1998-01-01

The Bonneville Power Administration (BPA) funds the ''Annual Coded Wire Tag Program - Missing Production Groups for Columbia River Hatcheries'' project. The Washington Department of Fish and Wildlife (WDFW), Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time and to meet various measures of the Northwest Power Planning Councils (NWPPC) Fish and Wildlife Program. The WDFW project has three main objectives: (1) coded-wire tag at least one production group of each species at each Columbia Basin hatchery to enable evaluation of survival and catch distribution over time, (2) recover coded-wire tags from the snouts of fish tagged under objective 1 and estimate survival, contribution, and stray rates for each group, and (3) report the findings under objective 2 for all broods of chinook, and coho released from WDFW Columbia Basin hatcheries. Objective 1 for FY-97 was met with few modifications to the original FY-97 proposal. Under Objective 2, snouts containing coded-wire tags that were recovered during FY-97 were decoded. Under Objective 3, survival, contribution and stray rate estimates for the 1991-96 broods of chinook and 1993-96 broods of coho have not been made because recovery data for 1996-97 fisheries and escapement are preliminary. This report summarizes recovery information through 1995

Typology of production systems in the rural area of Ibague, Colombia.

Directory of Open Access Journals (Sweden)

Cristina Rocha-Rodríguez

2016-06-01

Full Text Available The aim of this study was to perform a classification of the farms in the rural area of Ibague, Colombia. Between March and April 2013, 55 surveys were applied in five districts. The survey covered human, social, physical, financial, and natural aspects. The classification showed three types of farms: group 1 had a significant proportion of soil under pastures (3.71 ± 5.88 ha and these were typical systems of peasant economy, which combine agricultural and livestock activities. Group 2 was basically made up of farms dedicated to grow coffee; its surface was small (3.15 ± 2,31 ha. In group 3, farms with land use under pastures predominated; these farms had atypical characteristics, particularly by its size (52.43 ± 111.51 ha. Both agricultural and livestock productive diversity predominated, as well as the typical social heterogeneity of peasant societies.

Renormalization Group scale-setting in astrophysical systems

Science.gov (United States)

Domazet, Silvije; Štefančić, Hrvoje

2011-09-01

A more general scale-setting procedure for General Relativity with Renormalization Group corrections is proposed. Theoretical aspects of the scale-setting procedure and the interpretation of the Renormalization Group running scale are discussed. The procedure is elaborated for several highly symmetric systems with matter in the form of an ideal fluid and for two models of running of the Newton coupling and the cosmological term. For a static spherically symmetric system with the matter obeying the polytropic equation of state the running scale-setting is performed analytically. The obtained result for the running scale matches the Ansatz introduced in a recent paper by Rodrigues, Letelier and Shapiro which provides an excellent explanation of rotation curves for a number of galaxies. A systematic explanation of the galaxy rotation curves using the scale-setting procedure introduced in this Letter is identified as an important future goal.

Renormalization Group scale-setting in astrophysical systems

International Nuclear Information System (INIS)

Domazet, Silvije; Stefancic, Hrvoje

2011-01-01

A more general scale-setting procedure for General Relativity with Renormalization Group corrections is proposed. Theoretical aspects of the scale-setting procedure and the interpretation of the Renormalization Group running scale are discussed. The procedure is elaborated for several highly symmetric systems with matter in the form of an ideal fluid and for two models of running of the Newton coupling and the cosmological term. For a static spherically symmetric system with the matter obeying the polytropic equation of state the running scale-setting is performed analytically. The obtained result for the running scale matches the Ansatz introduced in a recent paper by Rodrigues, Letelier and Shapiro which provides an excellent explanation of rotation curves for a number of galaxies. A systematic explanation of the galaxy rotation curves using the scale-setting procedure introduced in this Letter is identified as an important future goal.

A low-memory algorithm for finding short product representations in finite groups

NARCIS (Netherlands)

Bisson, G.; Sutherland, A.V.

2012-01-01

We describe a space-efficient algorithm for solving a generalization of the subset sum problem in a finite group G, using a Pollard-¿ approach. Given an element z and a sequence of elements S, our algorithm attempts to find a subsequence of S whose product in G is equal to z. For a random sequence S

A low-memory algorithm for finding short product representations in finite groups

NARCIS (Netherlands)

Bisson, G.; Sutherland, A.V.

2011-01-01

We describe a space-efficient algorithm for solving a generalization of the subset sum problem in a finite group G, using a Pollard-rho approach. Given an element z and a sequence of elements S, our algorithm attempts to find a subsequence of S whose product in G is equal to z. For a random sequence

Experimental Systems-Biology Approaches for Clostridia-Based Bioenergy Production

Energy Technology Data Exchange (ETDEWEB)

Papoutsakis, Elefterios [Univ. of Delaware, Newark, DE (United States)

2015-04-30

This is the final project report for project "Experimental Systems-Biology Approaches for Clostridia-Based Bioenergy Production" for the funding period of 9/1/12 to 2/28/2015 (three years with a 6-month no-cost extension) OVERVIEW AND PROJECT GOALS The bottleneck of achieving higher rates and titers of toxic metabolites (such as solvents and carboxylic acids that can used as biofuels or biofuel precursors) can be overcome by engineering the stress response system. Thus, understanding and modeling the response of cells to toxic metabolites is a problem of great fundamental and practical significance. In this project, our goal is to dissect at the molecular systems level and build models (conceptual and quantitative) for the stress response of C. acetobutylicum (Cac) to its two toxic metabolites: butanol (BuOH) and butyrate (BA). Transcriptional (RNAseq and microarray based), proteomic and fluxomic data and their analysis are key requirements for this goal. Transcriptional data from mid-exponential cultures of Cac under 4 different levels of BuOH and BA stress was obtained using both microarrays (Papoutsakis group) and deep sequencing (RNAseq; Meyers and Papoutsakis groups). These two sets of data do not only serve to validate each other, but are also used for identification of stress-induced changes in transcript levels, small regulatory RNAs, & in transcriptional start sites. Quantitative proteomic data (Lee group), collected using the iTRAQ technology, are essential for understanding of protein levels and turnover under stress and the various protein-protein interactions that orchestrate the stress response. Metabolic flux changes (Antoniewicz group) of core pathways, which provide important information on the re-allocation of energy and carbon resources under metabolite stress, were examined using 13C-labelled chemicals. Omics data are integrated at different levels and scales. At the metabolic-pathway level, omics data are integrated into a 2nd generation genome

The Next Generation ATLAS Production System

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Vaniachine, Alexandre

2015-01-01

The ATLAS experiment at LHC data processing and simulation grows continuously, as more data and more use cases emerge. For data processing the ATLAS experiment adopted the data transformation approach, where software applications transform the input data into outputs. In the ATLAS production system, each data transformation is represented by a task, a collection of many jobs, dynamically submitted by the ATLAS workload management system (PanDA/JEDI) and executed on the Grid, clouds and supercomputers. Patterns in ATLAS data transformation workflows composed of many tasks provided a scalable production system framework for template definitions of the many-tasks workflows. User interface and system logic of these workflows are being implemented in the Database Engine for Tasks (DEFT). Such development required using modern computing technologies and approaches. We report technical details of this development: database implementation, server logic and Web user interface technologies.

Using Focus Group Interviews to Analyze the Behavior of Users of New Types of Tobacco Products.

Science.gov (United States)

Kim, Jinyoung; Lee, Sungkyu

2017-09-01

To characterize the usage patterns of new types of tobacco products (NTTPs) to develop effective strategies for the regulation of NTTPs in Korea. We conducted focus group interviews to identify the NTTP usage patterns of research subjects. The NTTPs were limited to electronic cigarettes (e-cigarettes), waterpipe tobacco, and rolling tobacco. We categorized 30 research subjects into 4 groups. The e-cigarette group was divided into adult and adolescent groups. Each group contained 7-8 subjects. An interview lasting approximately 2 hours was conducted with each group. Ninety percent of NTTP users used an NTTP in combination with conventional cigarettes. Subjects mostly bought NTTPs online, unlike how they bought cigarettes. Additionally, a great deal of information, such as how to use NTTPs and descriptions of NTTP products, was exchanged through online or offline societies. The primary reason why the subjects used NTTPs was that NTTPs offer a greater range of flavors and aromas than cigarettes. Moreover, NTTPs were felt to be less repulsive than cigarettes. NTTPs were not used as a cigarette substitute; rather, they were mostly used in places and situations where traditional cigarette smoking was not allowed. Based on the results of this study, the government should conduct studies on the effects of the combined use of NTTPs and cigarettes on the human body, obtain and provide accurate data regarding NTTP use, and develop and implement polices to ban NTTP advertising, which may arouse adolescents' curiosity, and the addition of flavoring substances to tobacco products.

Production Management System for AMS Computing Centres

Science.gov (United States)

Choutko, V.; Demakov, O.; Egorov, A.; Eline, A.; Shan, B. S.; Shi, R.

2017-10-01

The Alpha Magnetic Spectrometer [1] (AMS) has collected over 95 billion cosmic ray events since it was installed on the International Space Station (ISS) on May 19, 2011. To cope with enormous flux of events, AMS uses 12 computing centers in Europe, Asia and North America, which have different hardware and software configurations. The centers are participating in data reconstruction, Monte-Carlo (MC) simulation [2]/Data and MC production/as well as in physics analysis. Data production management system has been developed to facilitate data and MC production tasks in AMS computing centers, including job acquiring, submitting, monitoring, transferring, and accounting. It was designed to be modularized, light-weighted, and easy-to-be-deployed. The system is based on Deterministic Finite Automaton [3] model, and implemented by script languages, Python and Perl, and the built-in sqlite3 database on Linux operating systems. Different batch management systems, file system storage, and transferring protocols are supported. The details of the integration with Open Science Grid are presented as well.

Importance of silvopastoral systems on caloric stress reduction in tropical livestock productions

Directory of Open Access Journals (Sweden)

Alexander Navas Panadero

2010-06-01

Full Text Available Livestock systems in Colombia have been developed taking concepts and technologies from the green revolution, where gramineous monocrop is privileged over arboreal cover in grazing lands. This model has not taken into account the climatic conditions of the different tropical ecosystems, in which variables as temperature, relative humidity and evaporation can limit the animal´s productive and reproductive efficiency, besides being a risk factor for illness occurrence in the herd. Bos Taurus and Bos Indicus breeds show termoneutral ranges where its genetic potential can be express. However, out of this comfort area animals can enter in caloric stress which in consequence reduces its performance and sometimes can end up causing death. Silvopastoral systems comprise several functions; it contributes to lessen caloric stress since temperature under the tree canopy can reach between 2 and 9°C lower in comparison to open pastures. Differences in temperature reduction have been found among silvopastoral systems and species, being the tree group arrangements and the species with high density canopy, those with superior effect. Interactions among components should be analyzed in order to design systems that incorporate enough arboreal cover to achieve caloric stress reductions, but without affecting forage production in pastures. Silvopastoral systems contribute to improve animal welfare.

Structural Materials for Efficient Energy Production Systems

International Nuclear Information System (INIS)

Gomez Briceno, D.

2009-01-01

Increasing the efficiency of electric power production systems implies increasing the operating temperature above those of systems currently in operation. The viability of new systems depends completely on the availability of structural materials that withstand the operating conditions specified in the design: adequate features under mechanical stress at high temperatures and compatibility with the medium. In the case of nuclear systems (fission, fusion), an important requirement is their response to irradiation induced damage. In spite of the significant differences that exist in the design of nuclear power plants, fusion reactors, innovative fission systems, supercritical fossil plants, biomass plants, solar concentration thermal plants, etc., all of them have as a common characteristic the use of resistant materials at high temperatures. The qualification of existing materials for the new and more demanding operating conditions and the development of new materials is one of the challenges faced by the electric power production industry. The science of materials and the understanding of the basic processes that take place in structural materials on exposure to the operating conditions of energy production systems are the tools that are available to obtain safe and economically viable solutions. (Authors) 4 refs.

Towards a stakeholder model for the co-production of the public-sector information system

Directory of Open Access Journals (Sweden)

Zita P. Correia

2005-01-01

Full Text Available Introduction. Proposes a systemic approach to Public Sector Information (PSI, defined as comprising entities in four categories - citizens, businesses, policymakers and administrations. This system also comprises four categories of information - on citizenship, economic and social development, policy and administration. Method. . A selective literature review was conducted to produce a convergence of perspectives from different fields, to provide the foundations for the stakeholder model. Analysis. The implications of the systemic approach to PSI, are: a a holistic and open view of the entities and elements involved; b clarification of the role of each of the stakeholder groups; c commitment of each group to the public sector information system, and hence co-responsibility for the system. The principle of co-production is applied to the PSI system, by building on lessons from development studies. Results. A model is developed where the different groups of stakeholders are seen as groups of people and organizations with distinctive characteristics, playing different roles, but not mutually exclusive regarding their participation in the different subsystems. Conclusion. Success in adopting the proposed model may depend on pre-existing characteristics and conditions of each socio-political context, including existing levels of social capital, as much as on the implementation of technology to improve public service delivery. However, it is possible to build synergistic relations relatively quickly, through an imaginative application of 'soft technologies', such as institution-building and organizational change.

Development of redesign method of production system based on QFD

Science.gov (United States)

Kondoh, Shinsuke; Umeda, Yasusi; Togawa, Hisashi

In order to catch up with rapidly changing market environment, rapid and flexible redesign of production system is quite important. For effective and rapid redesign of production system, a redesign support system is eagerly needed. To this end, this paper proposes a redesign method of production system based on Quality Function Deployment (QFD). This method represents a designer's intention in the form of QFD, collects experts' knowledge as “Production Method (PM) modules,” and formulates redesign guidelines as seven redesign operations so as to support a designer to find out improvement ideas in a systematical manner. This paper also illustrates a redesign support tool of a production system we have developed based on this method, and demonstrates its feasibility with a practical example of a production system of a contact probe. A result from this example shows that comparable cost reduction to those of veteran designers can be achieved by a novice designer. From this result, we conclude our redesign method is effective and feasible for supporting redesign of a production system.

Catalytic hydrogenation of carbonyl group for deuterated compound production

International Nuclear Information System (INIS)

Gluhoi, C. Andreea; Marginean, P.; Lazar, Diana; Almasan, V.

1999-01-01

The total deuterated isopropyl alcohol can be produced starting from acetone. The developed technology comprises two steps: Deuteration of acetone by H/D isotopic exchange between acetone and heavy water in homogeneous catalysis. Reduction of the deuterated acetone with deuterium in presence of a metal/support catalyst. H/D isotopic exchange reaction of the H atoms from CH 3 groups is easy to occur because carbonyl group weakens C-H bond (ceto-enolyc tautomery). The big difference between boiling points of acetone and water permits an easy separation of acetone by distillation method. The reduction of acetone with deuterium was performed in a dynamic reactor by passing a deuterium flow saturated with acetone vapour through a supported nickel catalyst bed. The reaction products were analysed on-line using a flame ionisation detector. The supported nickel catalysts were checked for this reaction. By using nickel over different supports the selectivity for isopropyl alcohol was about 100%. The propane was detected only as traces. The catalytic activity depends strongly on the support nature: the Ni/SiO 2 is less active, while the Ni/TiO 2 presents the larger value for the intrinsic activity. (authors)

Research and development of HTTR hydrogen production systems

International Nuclear Information System (INIS)

Shiozawa, Shusaku; Ogawa, Masuro; Inagaki, Yoshiyuki; Onuki, Kaoru; Takeda, Tetsuaki; Nishihara, Tetsuo; Hayashi, Koji; Kubo, Shinji; Inaba, Yoshitomo; Ohashi, Hirofumi

2002-01-01

The Japan Atomic Energy Research Institute (JAERI) has constructed the High Temperature Engineering Test Reactor (HTTR) with a thermal output of 30MW and a reactor out let coolant temper at ure of 950 .deg. C. There search and development (R and D) program on nuclear production of hydrogen was started on January in 1997 as a study consigned by Ministry of Education, Culture, Sports, Science and Technology. A hydrogen production system connected to the HTTR is being designed to be able to produce hydrogen of about 4000m 3 /h by steam reforming of natural gas, using a nuclear heat of 10MW supplied by the HTTR hydrogen production system. In order to confirm controllability, safety and performance of key components in the HTTR hydrogen production system, the facility for the out-of-pile test was constructed on the scale of approximately 1/30 of the HTTR hydrogen production system. In parallel to the out-of-pile test, the following tests as essential problem, a corrosion test of a reforming tube, a permeation test of hydrogen isotopes through heat exchanger and reforming tubes, and an integrity test of a high-temperature isolation valve are carried out to obtain detailed data for safety review and development of analytical codes. Other basis studies on the hydrogen production technology of thermochemical water splitting called an iodine sulfur (IS) process, has been carried out for more effective and various uses of nuclear heat. This paper describes the present status and a future plan on the R and D of the HTTR hydrogen production systems in JAERI

The Areva Group

International Nuclear Information System (INIS)

2004-08-01

This document provides information on the Areva Group, a world nuclear industry leader, offering solutions for nuclear power generation, electricity transmission and distribution and interconnect systems to the telecommunications, computer and automotive markets. It presents successively the front end division including the group business lines involved in producing nuclear fuel for electric power generation (uranium mining, concentration, conversion and enrichment and nuclear fuel fabrication); the reactors and services division which designs and builds PWR, BWR and research reactors; the back end division which encompasses the management of the fuel that has been used in nuclear power plants; the transmission and distribution division which provides products, systems and services to the medium and high voltage energy markets; the connectors division which designs and manufactures electrical, electronic and optical connectors, flexible micro circuitry and interconnection systems. Areva is implemented in Europe, north and south america, africa and asia-pacific. (A.L.B.)

Improvements on burnup chain model and group cross section library in the SRAC system

International Nuclear Information System (INIS)

Akie, Hiroshi; Okumura, Keisuke; Takano, Hideki; Ishiguro, Yukio; Kaneko, Kunio.

1992-01-01

Data and functions of the cell burnup calculation of the SRAC system were revised to improve mainly the accuracy of the burnup calculation of high conversion light water reactors (HCLWRs). New burnup chain models were developed in order to treat fission products (FPs) and actinide nuclides in detail. Group cross section library, SRACLIB-JENDL2, was generated based on JENDL-2 nuclear data file. In generating this library, emphasis was placed on FPs and actinides. Also revised were the data such as the average energy release per fission for various actinides. These improved data were verified by performing the burnup analysis of PWR spent fuels. Some new functions were added to the SRAC system for the convenience to yield macroscopic cross sections used in the core burnup process. (author)

Modernizing the Regulatory System for Biotechnology Products

Science.gov (United States)

This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.

Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

DEFF Research Database (Denmark)

Saltini, Rolando; Akkerman, Renzo

2012-01-01

hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety......The primary aim of food traceability is to increase food safety, but traceability systems can also bring other benefits to production systems and supply chains. In the literature these benefits are extensively discussed, but studies that quantify them are scarce. In this paper we propose two...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

Psychotherapy with schizophrenics in team groups: a systems model.

Science.gov (United States)

Beeber, A R

1991-01-01

This paper focuses on the treatment of patients with schizophrenic disorders employing the Team Group model. The advantages and disadvantages of the Team Group are presented. Systems theory and principles of group development are applied as a basis for understanding the dynamics of the group in the context at the acute psychiatric unit. Particular problems encountered in treating patients with schizophrenic disorders in this setting are presented. These include: (1) issues of therapist style and technique, (2) basic psychopathology of the schizophrenic disorders, and (3) phase-specific problems associated with the dynamics of the group. Recommendations for therapist interventions are made that may better integrate these patients into the Team Group.

FY 1997 survey report on information sharing product life-cycle systems. 2; 1997 nendo joho kyoyugata product life cycle system ni kansuru chosa hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Highly value-added products considering a total life-cycle of products by integrating both production and consumption activities are much in demand, and each information corresponding to each product should be realized by concept integrating both information and product as common element. Survey was made on what a social system integrating production and consumption should be, a product information model, and technology integrating both information and product for raw material, industrial machine and household appliance as examples. An information model shared by the whole production and consumption activities was first prepared. Based on this model, data storage, update, retrieval and dispatch technologies were surveyed and developed for life-cycle systems. Degradation and life sensing technology was surveyed for maintenance, repair and disposal activities using proper unstable information of each product. A support system for use of shared information was developed to promote a new highly value-added function. Total evaluation was made on information sharing product life-cycle systems. 10 refs., 23 figs., 7 tabs.

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

Radical production in biological systems

International Nuclear Information System (INIS)

Johnson, J.R.; Akabani, G.

1994-10-01

This paper describes our effort to develop a metric for radiation exposure that is more fundamental than adsorbed dose and upon which a metric for exposure to chemicals could be based. This metric is based on the production of radicals by the two agents. Radicals produced by radiation in biological systems commonly assumed to be the same as those produced in water despite the presence of a variety of complex molecules. This may explain why the extensive efforts to describe the relationship between energy deposition (track structure) and molecular damage to DNA, based on the spectrum of radicals produced, have not been successful in explaining simple biological effects such as cell killing. Current models assume that DNA and its basic elements are immersed in water-like media and only model the production and diffusion of water-based radicals and their interaction with DNA structures; these models lack the cross sections associated with each macro-component of DNA and only treat water-based radicals. It has been found that such models are not realistic because DNA is not immersed in pure water. A computer code capable of simulating electron tracks, low-energy electrons, energy deposition in small molecules, and radical production and diffusion in water like media has been developed. This code is still in at a primitive stage and development is continuing. It is being used to study radical production by radiation, and radical diffusion and interactions in simple molecular systems following their production. We are extending the code to radical production by chemicals to complement our PBPK modeling efforts. It therefore has been developed primarily for use with radionuclides that are in biological materials, and not for radiation fields

Conceptual design of the HTTR-IS hydrogen production system

International Nuclear Information System (INIS)

Sakaba, Nariaki; Sato, Hiroyuki; Hara, Teruo; Kato, Ryoma; Ohashi, Kazutaka; Nishihara, Tetsuo; Kunitomi, Kazuhiko

2007-08-01

Since hydrogen produced by nuclear should be economically competitive compared with other methods in a hydrogen society, it is important to build hydrogen production system to be coupled with the reactor as a conventional chemical plant. Japan Atomic Energy Agency started the safety study to establish a new safety philosophy to meet safety requirements for non-nuclear grade hydrogen production system. Also, structural concepts with integrating functions for the Bunsen reactor and sulphuric acid decomposer were proposed to reduce construction cost of the IS process hydrogen production system. In addition, HI decomposer which enables the process condition to be eased consisting of conventional materials and technologies was studied. Moreover, technical feasibility of the HTTR-IS system in which the hydrogen production rate of 1,000 Nm 3 /h by using the supplied heat of 10 MW from the intermediate heat exchanger of the HTTR was confirmed. This paper describes the conceptual design of the HTTR-IS hydrogen production system. (author)

System-theoretic analysis of due-time performance in production systems

OpenAIRE

Jacobs David; Meerkov Semyon M.

1995-01-01

Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipme...

Egg production and welfare of laying hens kept in different housing systems (conventional, enriched cage, and free range).

Science.gov (United States)

Yilmaz Dikmen, B; İpek, A; Şahan, Ü; Petek, M; Sözcü, A

2016-07-01

The aim of this study was to compare egg production performance and welfare traits of laying hens kept in conventional cage (CC), enriched cage (EC), and free range (FR). Lohmann Brown laying hens (n = 480 with 160 per housing type) were studied across a production cycle from placement at 17 wk until depopulation at 66 wk. The hens were randomly allocated into cages or pens of housing system groups; within each system there were four replicates with 40 hens in each pen or cage. The hen day egg production (P = 0.037), feed intake (FI) (P 0.05). The hens in the FR system had additional space for optimum comfort and better feather and bone traits, but the dirty egg ratio, feed consumption, and foot lesions were higher than in CC and EC systems. © 2016 Poultry Science Association Inc.

Power Distribution System Planning Evaluation by a Fuzzy Multi-Criteria Group Decision Support System

Directory of Open Access Journals (Sweden)

Tiefeng Zhang

2010-10-01

Full Text Available The evaluation of solutions is an important phase in power distribution system planning (PDSP which allows issues such as quality of supply, cost, social service and environmental implications to be considered and usually involves the judgments of a group of experts. The planning problem is thus suitable for the multi-criteria group decision-making (MCGDM method. The evaluation process and evaluation criteria often involve uncertainties incorporated in quantitative analysis with crisp values and qualitative judgments with linguistic terms; therefore, fuzzy sets techniques are applied in this study. This paper proposes a fuzzy multi-criteria group decision-making (FMCGDM method for PDSP evaluation and applies a fuzzy multi-criteria group decision support system (FMCGDSS to support the evaluation task. We introduce a PDSP evaluation model, which has evaluation criteria within three levels, based on the characteristics of a power distribution system. A case-based example is performed on a test distribution network and demonstrates how all the problems in a PDSP evaluation are addressed using FMCGDSS. The results are acceptable to expert evaluators.

76 FR 13667 - Commercial Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe...

Science.gov (United States)

2011-03-14

... Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Including...., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Chicago, IL; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of...

Co-compact Gabor Systems on Locally Compact Abelian Groups

DEFF Research Database (Denmark)

Jakobsen, Mads Sielemann; Lemvig, Jakob

2016-01-01

In this work we extend classical structure and duality results in Gabor analysis on the euclidean space to the setting of second countable locally compact abelian (LCA) groups. We formulate the concept of rationally oversampling of Gabor systems in an LCA group and prove corresponding characteriz...

Rapid Prototyping of Social Group Dynamics in Multiagent Systems

DEFF Research Database (Denmark)

Rehm, Matthias; Endrass, Birgit

2009-01-01

In this article we present an engineering approach for the integration of social group dynamics in the behavior modeling of multiagent systems. To this end, a toolbox was created that brings together several theories from the social sciences, each focusing on different aspects of group dynamics. ...

Product prioritization in a two-stage food production system with intermediate storage

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the performance improvements for the prioritized product, as well as the negative effects for the other products. We also show how the effect decreases with more storage tanks, and increases with more products....... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

Comulang: towards a collaborative e-learning system that supports student group modeling.

Science.gov (United States)

Troussas, Christos; Virvou, Maria; Alepis, Efthimios

2013-01-01

This paper describes an e-learning system that is expected to further enhance the educational process in computer-based tutoring systems by incorporating collaboration between students and work in groups. The resulting system is called "Comulang" while as a test bed for its effectiveness a multiple language learning system is used. Collaboration is supported by a user modeling module that is responsible for the initial creation of student clusters, where, as a next step, working groups of students are created. A machine learning clustering algorithm works towards group formatting, so that co-operations between students from different clusters are attained. One of the resulting system's basic aims is to provide efficient student groups whose limitations and capabilities are well balanced.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Annual forage cropping-systems for midwestern ruminant livestock production

OpenAIRE

McMillan, John Ernest

2016-01-01

Annual forage cropping systems are a vital aspect of livestock forage production. One area where this production system can be enhanced is the integration of novel annual forages into conventional cropping systems. Two separate projects were conducted to investigate alternative forage options in annual forage production. In the first discussed research trial, two sets of crops were sown following soft red winter wheat (Triticum aestivum L.) grain harvest, at two nitrogen application rates 56 ...

A decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping).

Science.gov (United States)

Arts, Josje H E; Hadi, Mackenzie; Irfan, Muhammad-Adeel; Keene, Athena M; Kreiling, Reinhard; Lyon, Delina; Maier, Monika; Michel, Karin; Petry, Thomas; Sauer, Ursula G; Warheit, David; Wiench, Karin; Wohlleben, Wendel; Landsiedel, Robert

2015-03-15

The European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) 'Nano Task Force' proposes a Decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping) that consists of 3 tiers to assign nanomaterials to 4 main groups, to perform sub-grouping within the main groups and to determine and refine specific information needs. The DF4nanoGrouping covers all relevant aspects of a nanomaterial's life cycle and biological pathways, i.e. intrinsic material and system-dependent properties, biopersistence, uptake and biodistribution, cellular and apical toxic effects. Use (including manufacture), release and route of exposure are applied as 'qualifiers' within the DF4nanoGrouping to determine if, e.g. nanomaterials cannot be released from a product matrix, which may justify the waiving of testing. The four main groups encompass (1) soluble nanomaterials, (2) biopersistent high aspect ratio nanomaterials, (3) passive nanomaterials, and (4) active nanomaterials. The DF4nanoGrouping aims to group nanomaterials by their specific mode-of-action that results in an apical toxic effect. This is eventually directed by a nanomaterial's intrinsic properties. However, since the exact correlation of intrinsic material properties and apical toxic effect is not yet established, the DF4nanoGrouping uses the 'functionality' of nanomaterials for grouping rather than relying on intrinsic material properties alone. Such functionalities include system-dependent material properties (such as dissolution rate in biologically relevant media), bio-physical interactions, in vitro effects and release and exposure. The DF4nanoGrouping is a hazard and risk assessment tool that applies modern toxicology and contributes to the sustainable development of nanotechnological products. It ensures that no studies are performed that do not provide crucial data and therefore saves animals and resources. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights

Development of Souvenir Production Transaction Processing System

Science.gov (United States)

Rumambi, H.; Kaparang, R.; Lintong, J.

2018-01-01

This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

Using Focus Group Interviews to Analyze the Behavior of Users of New Types of Tobacco Products

Science.gov (United States)

2017-01-01

Objectives To characterize the usage patterns of new types of tobacco products (NTTPs) to develop effective strategies for the regulation of NTTPs in Korea. Methods We conducted focus group interviews to identify the NTTP usage patterns of research subjects. The NTTPs were limited to electronic cigarettes (e-cigarettes), waterpipe tobacco, and rolling tobacco. We categorized 30 research subjects into 4 groups. The e-cigarette group was divided into adult and adolescent groups. Each group contained 7-8 subjects. An interview lasting approximately 2 hours was conducted with each group. Results Ninety percent of NTTP users used an NTTP in combination with conventional cigarettes. Subjects mostly bought NTTPs online, unlike how they bought cigarettes. Additionally, a great deal of information, such as how to use NTTPs and descriptions of NTTP products, was exchanged through online or offline societies. The primary reason why the subjects used NTTPs was that NTTPs offer a greater range of flavors and aromas than cigarettes. Moreover, NTTPs were felt to be less repulsive than cigarettes. NTTPs were not used as a cigarette substitute; rather, they were mostly used in places and situations where traditional cigarette smoking was not allowed. Conclusions Based on the results of this study, the government should conduct studies on the effects of the combined use of NTTPs and cigarettes on the human body, obtain and provide accurate data regarding NTTP use, and develop and implement polices to ban NTTP advertising, which may arouse adolescents’ curiosity, and the addition of flavoring substances to tobacco products. PMID:29020756

Using Focus Group Interviews to Analyze the Behavior of Users of New Types of Tobacco Products

Directory of Open Access Journals (Sweden)

Jinyoung Kim

2017-09-01

Full Text Available Objectives To characterize the usage patterns of new types of tobacco products (NTTPs to develop effective strategies for the regulation of NTTPs in Korea. Methods We conducted focus group interviews to identify the NTTP usage patterns of research subjects. The NTTPs were limited to electronic cigarettes (e-cigarettes, waterpipe tobacco, and rolling tobacco. We categorized 30 research subjects into 4 groups. The e-cigarette group was divided into adult and adolescent groups. Each group contained 7-8 subjects. An interview lasting approximately 2 hours was conducted with each group. Results Ninety percent of NTTP users used an NTTP in combination with conventional cigarettes. Subjects mostly bought NTTPs online, unlike how they bought cigarettes. Additionally, a great deal of information, such as how to use NTTPs and descriptions of NTTP products, was exchanged through online or offline societies. The primary reason why the subjects used NTTPs was that NTTPs offer a greater range of flavors and aromas than cigarettes. Moreover, NTTPs were felt to be less repulsive than cigarettes. NTTPs were not used as a cigarette substitute; rather, they were mostly used in places and situations where traditional cigarette smoking was not allowed. Conclusions Based on the results of this study, the government should conduct studies on the effects of the combined use of NTTPs and cigarettes on the human body, obtain and provide accurate data regarding NTTP use, and develop and implement polices to ban NTTP advertising, which may arouse adolescents’ curiosity, and the addition of flavoring substances to tobacco products.

Truck shovel users group

Energy Technology Data Exchange (ETDEWEB)

Thomas, J. [Surface Mining Association for Research and Technology, AB (Canada)

2008-07-01

The Truck Shovel Users Group (TSUG) was developed as part of the Surface Mining Association for Research and Technology (SMART), an association of companies that meet to coordinate technology developments for the mining industry. The TSUG meet regularly to discuss equipment upgrades, maintenance planning systems, and repair techniques. The group strives to maximize the value of its assets through increased safety, equipment performance and productivity. This presentation provided administrative details about the TSUG including contact details and admission costs. It was concluded that members of the group must be employed by companies that use heavy mining equipment, and must also be willing to host meetings, make presentations, and support the common goals of the group. tabs., figs.

The Language of Cigar Use: Focus Group Findings on Cigar Product Terminology.

Science.gov (United States)

Dickinson, Denise M; Johnson, Sarah E; Coleman, Blair N; Tworek, Cindy; Tessman, Greta K; Alexander, Jennifer

2016-05-01

The consumption of cigar products has increased since 2000. The multiple product types within this category, combined with the varied language with which consumers refer to them, present challenges for accurately assessing the prevalence of cigar product use. Surveillance is also complicated by the fact that these products can be used to smoke marijuana, as "blunts"-cigars in which the tobacco is removed and replaced with marijuana. Few studies exist regarding the language and terminology used to describe these products. Sixteen focus groups were conducted in five cities in the United States between March and May of 2014. Participants (N = 123) included adults who had used cigars, cigarillos, or little cigars in the past 30 days. A semi-structured moderator guide was used to gather data on the terms used to identify cigar product subtypes and the language used to describe the products and their use. Participants used a variety of terms for each product subtype. Brand names were often used, as well as slang terms, including terms describing cigars modified for marijuana use. Some subtypes were less likely than others to be considered "cigars." Participants had mixed opinions about whether users of cigar products are "smokers." Users of cigar products may classify or label products differently from researchers and policy makers, and many refer to their product by brand name or a slang term. These findings have implications for future research, instrument design, and public health messaging about cigar products. This study adds to the body of evidence highlighting the challenges for measurement and surveillance of non-cigarette tobacco products, including cigars. Findings illustrate the myriad terms used by consumers to describe their use of cigar product subtypes, as well as the complexity of distinguishing between use of cigar products as intended, versus as a vehicle for smoking marijuana. Future research aimed to enhance specificity of cigar use measures will

Fully automatic CNC machining production system

Directory of Open Access Journals (Sweden)

Lee Jeng-Dao

2017-01-01

Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.

Working group II report: Production and dynamics of high brightness beams

International Nuclear Information System (INIS)

Sheffield, R.L.

1996-01-01

This paper summarizes the main discussions of the Working Group on the Production and Dynamics of High Brightness Beams. The following topics are covered in this paper. Proposed new electron sources and needed research on existing sources is covered. The discussions on issues relating to the description of phase space on non-thermalized electron beam distributions and the theoretical modeling on non-thermalized electron beam distributions is presented. Finally, the present status of the theoretical modeling of beam transport in bends is given

Product configuration of infra structure systems for data centres

DEFF Research Database (Denmark)

Hvam, Lars; Christensen, Tim Teglgaard; Jensen, Søren Brogaard

2007-01-01

centres, and components and systems for these systems. At the heart of its mass customisation strategy are a module-based product range and the use of product configuration systems for sales and order processing. In addition, the company has implemented a manufacturing concept, which involves the mass...

Matrix-product states for strongly correlated systems and quantum information processing

International Nuclear Information System (INIS)

Saberi, Hamed

2008-01-01

This thesis offers new developments in matrix-product state theory for studying the strongly correlated systems and quantum information processing through three major projects: In the first project, we perform a systematic comparison between Wilson's numerical renormalization group (NRG) and White's density-matrix renormalization group (DMRG). The NRG method for solving quantum impurity models yields a set of energy eigenstates that have the form of matrix-product states (MPS). White's DMRG for treating quantum lattice problems can likewise be reformulated in terms of MPS. Thus, the latter constitute a common algebraic structure for both approaches. We exploit this fact to compare the NRG approach for the single-impurity Anderson model to a variational matrix-product state approach (VMPS), equivalent to single-site DMRG. For the latter, we use an ''unfolded'' Wilson chain, which brings about a significant reduction in numerical costs compared to those of NRG. We show that all NRG eigenstates (kept and discarded) can be reproduced using VMPS, and compare the difference in truncation criteria, sharp vs. smooth in energy space, of the two approaches. Finally, we demonstrate that NRG results can be improved upon systematically by performing a variational optimization in the space of variational matrix-product states, using the states produced by NRG as input. In the second project we demonstrate how the matrix-product state formalism provides a flexible structure to solve the constrained optimization problem associated with the sequential generation of entangled multiqubit states under experimental restrictions. We consider a realistic scenario in which an ancillary system with a limited number of levels performs restricted sequential interactions with qubits in a row. The proposed method relies on a suitable local optimization procedure, yielding an efficient recipe for the realistic and approximate sequential generation of any entangled multiqubit state. We give

Matrix-product states for strongly correlated systems and quantum information processing

Energy Technology Data Exchange (ETDEWEB)

Saberi, Hamed

2008-12-12

This thesis offers new developments in matrix-product state theory for studying the strongly correlated systems and quantum information processing through three major projects: In the first project, we perform a systematic comparison between Wilson's numerical renormalization group (NRG) and White's density-matrix renormalization group (DMRG). The NRG method for solving quantum impurity models yields a set of energy eigenstates that have the form of matrix-product states (MPS). White's DMRG for treating quantum lattice problems can likewise be reformulated in terms of MPS. Thus, the latter constitute a common algebraic structure for both approaches. We exploit this fact to compare the NRG approach for the single-impurity Anderson model to a variational matrix-product state approach (VMPS), equivalent to single-site DMRG. For the latter, we use an ''unfolded'' Wilson chain, which brings about a significant reduction in numerical costs compared to those of NRG. We show that all NRG eigenstates (kept and discarded) can be reproduced using VMPS, and compare the difference in truncation criteria, sharp vs. smooth in energy space, of the two approaches. Finally, we demonstrate that NRG results can be improved upon systematically by performing a variational optimization in the space of variational matrix-product states, using the states produced by NRG as input. In the second project we demonstrate how the matrix-product state formalism provides a flexible structure to solve the constrained optimization problem associated with the sequential generation of entangled multiqubit states under experimental restrictions. We consider a realistic scenario in which an ancillary system with a limited number of levels performs restricted sequential interactions with qubits in a row. The proposed method relies on a suitable local optimization procedure, yielding an efficient recipe for the realistic and approximate sequential generation of any

Multiple products management system with sensors array in automated storage and retrieval systems

Science.gov (United States)

Vongbunyong, Supachai; Roengritronnachai, Perawat; Kongsanit, Savanut; Chanok-owat, Chawisa; Polchankajorn, Pongsakorn

2018-01-01

Automated Storage and Retrieval Systems (AS/RS) have now been widely used in a number of industries due to its capability to automatically manage the storage of products in effective ways. One of the key features of AS/RS is that each rack is not assigned for a specific product resulting in the benefit of space utilization and logistics related issues. In this research, sensor arrays are equipped at each rack in order to enhance this feature. As a result, various products can be identified and mixed in each rack, so that the space utilization efficiency can be increased. To prove the concept, a prototype system consisting of a Cartesian robot that manages the storage and retrieval of products with 9 variations based on size and color. The concept of Cyber-Physical System and self-awareness of the system are also implemented in this concept prototype.

14 CFR 21.125 - Production inspection system: Materials Review Board.

Science.gov (United States)

2010-01-01

... § 21.125 Production inspection system: Materials Review Board. Link to an amendment published at 74 FR... Materials Review Board action for at least two years. (b) The production inspection system required in § 21... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Production inspection system: Materials...

Iterative group splitting algorithm for opportunistic scheduling systems

KAUST Repository

Nam, Haewoon; Alouini, Mohamed-Slim

2014-01-01

An efficient feedback algorithm for opportunistic scheduling systems based on iterative group splitting is proposed in this paper. Similar to the opportunistic splitting algorithm, the proposed algorithm adjusts (or lowers) the feedback threshold

Attitudes of Brazilian citizens towards pig production systems

DEFF Research Database (Denmark)

de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Saab, Maria Stella Melo

to identify Brazilian citizen clusters. Respondents' socio-demographic profile, attitudes towards issues that are expected to influence the way how people evaluate pig meat production systems, and consumption frequency of various pork products were used as background information for profiling. Three clusters...... and consumption behaviour was found to be weak. As it was suggested for Europe (Krystallis et al., 2009), what people think in their role as citizens related to pig production does not appear to significantly influence their pork consumption choices.......The objective of this study is to map Brazilian citizen attitudes towards pig meat production systems and to investigate whether these attitudes associate with pork and pork product consumption. A conjoint experiment was carried out with empirical data collected from 475 respondents interviewed...

Conceptualizing the use of system products and system deliveries in the building industry

DEFF Research Database (Denmark)

Hvam, Lars; Mortensen, Niels Henrik; Thuesen, Christian

2013-01-01

on the product architecture and partly of the setup of the business processes by using e.g. Configure to Order processes and Engineer to Order processes. Furthermore the potential impacts from using system products and system deliveries are discussed based on the examples included....

Summary of the separations breakout group

Energy Technology Data Exchange (ETDEWEB)

Jensen, R. [Los Alamos National Laboratory, NM (United States)

1995-10-01

The Separations Breakout Group reviewed the wide spectrum of separations technologies available for application to ADTT systems. Separations processes play a key role in areas associated with preparation of feed materials for introduction into ADTT, removal of fission products and other transmutation byproducts that build into the fuel during operation, and in the preparation of wastes ({open_quotes}polishing{close_quotes}) for discharge from ADTT systems so as to meet appropriate waste disposal criteria. General separations technologies addressed by the group included aqueous, fluoride salt, and chloride salt approaches.

Business cases for product configuration systems

DEFF Research Database (Denmark)

Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...... to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested...

FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

Customized products and cloud service information system development research

Directory of Open Access Journals (Sweden)

Hung Chien-Wen

2017-01-01

Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

The Reconfiguration of Service Production Systems in Response to Offshoring

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

2017-01-01

Purpose: A service production system has a structure composed of task execution, agents performing tasks and a resulting service output. The purpose of this paper is to understand how such a service production system changes as a consequence of offshoring.Design/methodology/approach: Drawing...... of a service production system in response to change ignited by offshoring. The authors find recurring effects between structures that enable and constrain agents and agents who shape the structure of the production system. Research limitations/implications: The paper offers a novel contribution to the service...... operations management literature by applying practice theory. Moreover, the authors propose a detailed, activity-driven view of service production systems and service offshoring. The authors contribute to practice theory by extending its domain to operations management.Practical implications...

Evolution of tsunami warning systems and products.

Science.gov (United States)

Bernard, Eddie; Titov, Vasily

2015-10-28

Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. © 2015 The Authors.

Evolution of tsunami warning systems and products

Science.gov (United States)

Bernard, Eddie; Titov, Vasily

2015-01-01

Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. PMID:26392620

Finite cluster renormalization group for disordered two-dimensional systems

International Nuclear Information System (INIS)

El Kenz, A.

1987-09-01

A new type of renormalization group theory using the generalized Callen identities is exploited in the study of the disordered systems. Bond diluted and frustrated Ising systems on a square lattice are analyzed with this new scheme. (author). 9 refs, 2 figs, 2 tabs

MERIP - Design of Production Systems with focus on Human Ressources

DEFF Research Database (Denmark)

Jacobsen, Peter; Knudsen, Mads Kristian Lund

1998-01-01

", "Employee-activated Production Development - MAPU", "Integrated Production Systems - IPS" and "Strategic Development of Staff - SUM". MERIP (Human resources in production) is a continuation of this type of projects, aiming at increasing the competitive power of the companies. However MERIP scientists want...... to involve the human resources in the production in new ways. Therefore the objective of the project is to develop methods for design of production systems, that use every possibility in human resources supported by the technology aiming at increasing the competitive power of the companies. The task force......The way in which the Industry has involved the human resources in production systems, has changed in last decades. Previously the human resources were mainly considered as means to link together the technical systems, while today they are key resources responsible for development, planning...

Modular Product Families and Assembly Systems

DEFF Research Database (Denmark)

Thyssen, Jesper

2005-01-01

This research centres on assembly systems designed for utilizing product modularization. Altogether, the task for companies has become an issue of managing the overall trade-off between the external market’s desire for variety and the internal efficiency and effectiveness. Product modularization...... a number of theoretical and managerial implications are identified. From a management point of view, the most im-portant finding is that modularization needs to be configured for the two competitive situations, i.e. 1) the volume flexible configuration focusing on generational product variety and 2......) the mix flexible con-figuration focusing on the simultaneous product variety. These two views are in particular different in respect to the understanding of product modularization. All in all, modularization needs to be, and can be, configured in regard to the specific task, which is believed constituting...

Risk-Optimized Design of Production Systems by Use of GRAMOSA

Directory of Open Access Journals (Sweden)

Michael Lütjen

2014-01-01

Full Text Available Today production and logistic systems are getting more complex. This is a problem which the planning and design of such systems have to deal with. One main issue of production system development in series production is the planning of production processes and systems under uncertainty. New and existing production technologies are often not fully adoptable to new products. This is why some of the main characteristics, like, for example, cost, time, or quality, are not definable at the beginning. Only value ranges and probabilities can be estimated. However, the adaptation process is controllable, which means that the adaptation results are depending on the existing development budget and its resources. This paper presents an approach for the optimized allocation of development resources regarding the adaptation risks of production technologies and processes. The modeling concept GRAMOSA is used for integrated modeling and discrete event-based simulation of the aspired production system. To this end a domain-specific modeling language (DSML is applied. The further risk-based analysis of the simulation results and the optimized allocation of the development budget are done by use of mathematical optimization.

Corrosion-product inventory: the Bruce-B secondary system

International Nuclear Information System (INIS)

Sawicki, J.A.; Price, J.; Brett, M.E.

1995-01-01

Corrosion inspection and corrosion-product characterization in water and steam systems are important for component and systems maintenance in nuclear power stations. Corrosion products are produced, released and redeposited at various sites in the secondary system. Depending on the alloys used in the condenser and feedwater heaters, particulate iron oxides and hydroxides can account for about 95-99% of the total corrosion-product transport. Where brass or cupro-nickel alloys are present, copper and zinc contribute significantly to the total transport and deposition. Particulates are transported by the feedwater to the steam generators, where they accumulate and can cause a variety of problems, such as loss of heat transfer capability through deposition on boiler tubes, blockage of flow through boiler-tube support plates and accelerated corrosion in crevices, either in deep sludge piles or at blocked tube supports. The influx of oxidized corrosion products may have a particularly adverse effect on the redox environment of steam generator tubing, thereby increasing the probability of localized corrosion and other degradation mechanisms. In this paper, there is a description of a survey of general corrosion deposits in Bruce-B, Units 5-8, which helps to identify the origin, evolution and inventory of corrosion products along the secondary system of Candu reactors

Implementation of HACCP system in production of UHT milk

Directory of Open Access Journals (Sweden)

Irena Jeličić

2009-06-01

Full Text Available Regulation of the Croatian Food Law (NN 46/07 which demands implementation of food safety management system based on HACCP principles became mandatory at the January 01st 2009. According to that regulation all subjects in food production and retail sector including the dairy industry too are obligant to implement HACCP system in their production processes. In the process of HACCP implementation many problems occur which result in delaying the implementation, scarce performance of assigned monitoring actions and inadequate maintenance and improvement of the system. All of the latter mentioned problems disable proactive functioning and may lead to disturbance of food safety of the end product. The aim of this paper is to demonstrate the interpretation of each steps that have to be taken in the process of implementation of HACCP system in the production of UHT milk. Thereby many practical informations and examples have been gathered while reviewing the HACCP system in KIM d.d. Dairy industry, Karlovac, Croatia. This paper contains the examples of all indentified hazards, all assigned control actions, hazard analysis and critical control point determination for the process of UHT milk production in KIM d.d. Dairy industry, Karlovac. Furthermore, also examples and ideas for the traceability, verification and validation, product recall and withdrawal procedures are given.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Platform strategy for complex products and systems

NARCIS (Netherlands)

Alblas, A.A.

2011-01-01

The thesis of Alex Alblas presents a design reuse strategy for firms producing complex products and systems (CoPS). Examples of CoPS include industrial machinery, oil-rigs, electrical power distribution systems, integrated mail processing systems and printing press machinery. CoPS firms are

From LCA to PSS – Making leaps towards sustainability by applying product/service-system thinking in product development

DEFF Research Database (Denmark)

Bey, Niki; McAloone, Timothy Charles

2006-01-01

for optimisations on all system levels. However, as the act of ecodesign conventionally focuses on physical products, the search for potential optimisations is usually directed ‘downwards’, i.e. towards lower system levels, resulting in optimised components within products rather than optimised products within...... their surrounding systems. This paper will exemplify that when broadening the ecodesign horizon to environmental product/service-system (PSS) design, there is a better possibility of applying a system-oriented life cycle thinking approach, and therefore a potential to yield extreme improvements towards...

Non-commutative representation for quantum systems on Lie groups

Energy Technology Data Exchange (ETDEWEB)

Raasakka, Matti Tapio

2014-01-27

The topic of this thesis is a new representation for quantum systems on weakly exponential Lie groups in terms of a non-commutative algebra of functions, the associated non-commutative harmonic analysis, and some of its applications to specific physical systems. In the first part of the thesis, after a review of the necessary mathematical background, we introduce a {sup *}-algebra that is interpreted as the quantization of the canonical Poisson structure of the cotangent bundle over a Lie group. From the physics point of view, this represents the algebra of quantum observables of a physical system, whose configuration space is a Lie group. We then show that this quantum algebra can be represented either as operators acting on functions on the group, the usual group representation, or (under suitable conditions) as elements of a completion of the universal enveloping algebra of the Lie group, the algebra representation. We further apply the methods of deformation quantization to obtain a representation of the same algebra in terms of a non-commutative algebra of functions on a Euclidean space, which we call the non-commutative representation of the original quantum algebra. The non-commutative space that arises from the construction may be interpreted as the quantum momentum space of the physical system. We derive the transform between the group representation and the non-commutative representation that generalizes in a natural way the usual Fourier transform, and discuss key properties of this new non-commutative harmonic analysis. Finally, we exhibit the explicit forms of the non-commutative Fourier transform for three elementary Lie groups: R{sup d}, U(1) and SU(2). In the second part of the thesis, we consider application of the non-commutative representation and harmonic analysis to physics. First, we apply the formalism to quantum mechanics of a point particle on a Lie group. We define the dual non-commutative momentum representation, and derive the phase

Non-commutative representation for quantum systems on Lie groups

International Nuclear Information System (INIS)

Raasakka, Matti Tapio

2014-01-01

The topic of this thesis is a new representation for quantum systems on weakly exponential Lie groups in terms of a non-commutative algebra of functions, the associated non-commutative harmonic analysis, and some of its applications to specific physical systems. In the first part of the thesis, after a review of the necessary mathematical background, we introduce a * -algebra that is interpreted as the quantization of the canonical Poisson structure of the cotangent bundle over a Lie group. From the physics point of view, this represents the algebra of quantum observables of a physical system, whose configuration space is a Lie group. We then show that this quantum algebra can be represented either as operators acting on functions on the group, the usual group representation, or (under suitable conditions) as elements of a completion of the universal enveloping algebra of the Lie group, the algebra representation. We further apply the methods of deformation quantization to obtain a representation of the same algebra in terms of a non-commutative algebra of functions on a Euclidean space, which we call the non-commutative representation of the original quantum algebra. The non-commutative space that arises from the construction may be interpreted as the quantum momentum space of the physical system. We derive the transform between the group representation and the non-commutative representation that generalizes in a natural way the usual Fourier transform, and discuss key properties of this new non-commutative harmonic analysis. Finally, we exhibit the explicit forms of the non-commutative Fourier transform for three elementary Lie groups: R d , U(1) and SU(2). In the second part of the thesis, we consider application of the non-commutative representation and harmonic analysis to physics. First, we apply the formalism to quantum mechanics of a point particle on a Lie group. We define the dual non-commutative momentum representation, and derive the phase space path

Product System Design – to Household Massage Design as An Example

Directory of Open Access Journals (Sweden)

Wang Huabin

2016-01-01

Full Text Available Explain what is the system design and the applications of System design in the product design process. Using The whole idea and systems design methods to analyze the design of household hand massage，Use a chart image to explain that Household hand massage products in the influence of user and the environment, the influence of large system environment for the product. The use of components of the system to anatomy product design. Each system components has a link between and mutual correlation.

Typologies and Spatialization of Agricultural Production Systems in Rondônia, Brazil: Linking Land Use, Socioeconomics and Territorial Configuration

Directory of Open Access Journals (Sweden)

Cláudio Almeida

2016-06-01

Full Text Available The current Amazon landscape consists of heterogeneous mosaics formed by interactions between the original forest and productive activities. Recognizing and quantifying the characteristics of these landscapes is essential for understanding agricultural production chains, assessing the impact of policies, and in planning future actions. Our main objective was to construct the regionalization of agricultural production for Rondônia State (Brazilian Amazon at the municipal level. We adopted a decision tree approach, using land use maps derived from remote sensing data (PRODES and TerraClass combined with socioeconomic data. The decision trees allowed us to allocate municipalities to one of five agricultural production systems: (i coexistence of livestock production and intensive agriculture; (ii semi-intensive beef and milk production; (iii semi-intensive beef production; (iv intensive beef and milk production, and; (v intensive beef production. These production systems are, respectively, linked to mechanized agriculture (i, traditional cattle farming with low management, with (ii or without (iii a significant presence of dairy farming, and to more intensive livestock farming with (iv or without (v a significant presence of dairy farming. The municipalities and associated production systems were then characterized using a wide variety of quantitative metrics grouped into four dimensions: (i agricultural production; (ii economics; (iii territorial configuration, and; (iv social characteristics. We found that production systems linked to mechanized agriculture predominate in the south of the state, while intensive farming is mainly found in the center of the state. Semi-intensive livestock farming is mainly located close to the southwest frontier and in the north of the state, where human occupation of the territory is not fully consolidated. This distributional pattern reflects the origins of the agricultural production system of Rond

On generator systems for non-torsion Abelian groups of infinite free rank

International Nuclear Information System (INIS)

Lebedenko, V.M.

1977-01-01

The paper is further advance in solution of the Dlab problem related to the systems of generators of Abelian groups. Some existence criteria for hereditarily strongly reducible systems of generators of Abelian groups are presented. On this basis the distribution of non-torsion groups of infinite free rank on Dlab's classes is obtained

Attitudes of European citizens towards pig production systems

DEFF Research Database (Denmark)

Krystallis, Athanasios; de Barcellos, Marcia Dutra; Kügler, Jens Oliver

2009-01-01

The objective of the study is to map citizen attitudes towards pigmeat production systems, and to investigate whether these attitudes associate with pork and pork product consumption. A conjoint experimentwas carried out with empirical data collected from 1931 individuals in four European countries...... pork with specific fat content, and finally the preferred quality characteristics of the pork end-product. The results of the conjoint analysis were used for a subsequent cluster analysis in order to identify European citizen clusters. Respondents' socio-demographic profile, attitudes towards issues...... that are expected to influence the way people evaluate pig meat production systems, and consumption frequency of various pork products are used as background information to identify segment profiles. Pork appears to play a substantial role as a part of the diet for most respondents in the four countries...

Improving Labor Productivity and Labor Elasticity at Multiproduct Japanese Cuisine Restaurant Introducing Cell-Production System

OpenAIRE

Shimamura , Takeshi; Takenaka , Takeshi; Ohura , Syuichi

2013-01-01

Part III: Sustainable Services; International audience; This study examined improvement of labor productivity and elasticity of labor hour on sales of a multiproduct Japanese cuisine restaurant. Conventionally, multiproduct restaurant operations include a line production system in the kitchen. Japanese chefs are assumed to be low-skilled workers with staff members supported by someone. A cell production system is introduced into a Japanese Cuisine restaurant to improve it. Results show that t...

Life cycle assessment and the resilience of product systems

DEFF Research Database (Denmark)

Pizzol, Massimo

2015-01-01

Resilience is the capacity of systems to withstand and recover from disturbance, depends on the structure and architecture of a system, and plays a key role for the sustainability of complex systems. Despite its importance, resilience is not explicitly taken into account by studies of life cycle...... assessment (LCA), which main objective is determining the eco-efficiency of a product system with limited focus on its structure. The question is whether a product system which structure is improved or designed to be more resilient will result in being not only inefficient, but also eco-inefficient, when...... assessed by means of LCA. This study proposes a theoretical modelling approach to compare vulnerable and resilient product systems within the framework of LCA, consisting of assessment of disturbance and system expansion. Examples are provided where the theory is made operational. The structure...

An inventory control model for biomass dependent production systems

International Nuclear Information System (INIS)

Grado, S.C.; Strauss, C.H.

1993-01-01

The financial performance of a biomass dependent production system was critiqued based on the development and validation of an inventory control model. Dynamic programming was used to examine the constraints and capabilities of producing ethanol from various biomass crops. In particular, the model evaluated the plantation, harvest, and manufacturing components of a woody biomass supply system. The optimum wood to ethanol production scheme produced 38 million litres of ethanol in the harvest year, at 13.6 million litre increase over the least optimal policy as demonstrated in the dynamic programming results. The system produced ethanol at a delivered cost of $0.38 L -1 which was consistent with the unit costs from other studies. Nearly 60% of the delivered costs were in ethanol production. The remaining costs were attributed to growing biomass (14%), harvest and shipment of the crop (18%), storage of the raw material and finished product (7%) and open-quotes lost salesclose quotes (2%). Inventory control, in all phases of production, proved to be an important cost consideration throughout the model. The model also analyzed the employment of alternative harvesting policies and the use of different or multiple feedstocks. A comparison between the least cost wood system and an even cut wood system further revealed the benefits of using an inventory control system

Carbon footprint and ammonia emissions of California beef production systems.

Science.gov (United States)

Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

2012-12-01

Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

Nitrogen performance indicators for dairy production systems

NARCIS (Netherlands)

Klein, De Cecile A.M.; Monaghan, Ross M.; Alfaro, Marta A.; Gourley, Cameron J.P.; Oenema, Oene; Mark Powell, J.

2017-01-01

Nitrogen (N) is invaluable for maintaining agricultural production, but its use, and particularly inefficient use, can lead to environmental losses. This paper reviews N use efficiency (NUE) and N surplus indicators for dairy production systems to assess their utility for optimising N use outcomes

Adoption of automated livestock production systems in Northern Europe

DEFF Research Database (Denmark)

Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

2014-01-01

In the last decades the development of automated systems in livestock production has gained increasing interest among farmers. A combined use of computers and sensor systems has lead the development into new research areas with automated milking systems, grain drying systems and automated feeding...... on the relationship and adoption patterns among these countries. The paper presents the results of the surveyed population, demography, farm structure with livestock production characteristics and farmers use of selected automated systems in livestock production....... systems. The aim of this paper is to present the results of a farm survey and cluster analysis that have been made among 4 countries in Europe. This study is based on replies from 413 respondents in Germany (eastern part), Greece, Finland and Denmark, respectively, and the study comments...

Estimating New Product Success with the Use of Intelligent Systems

Directory of Open Access Journals (Sweden)

Relich Marcin

2014-12-01

Full Text Available The paper presents identifying success factors in new product development and selecting new product portfolio. The critical success factors are identified on the basis of an enterprise system, including the fields of project management, marketing and customer’s comments concerning the previous products. The model of measuring the success of a product includes the indicators such as duration and cost of product development, and net profit from a product. The proposed methodology is based on identification of the relationships between product success and project environment parameters with the use of artificial neural networks and fuzzy neural system that is compared with the results from linear model. The presented method contains the stages of knowledge discovery process such as data selection, data preprocessing, and data mining in the context of an enterprise resource planning system database. The illustrative example enhances a performance comparison of intelligent systems in the context of data preprocessing.

A production system for computerized emergency procedures tracking

International Nuclear Information System (INIS)

Petrick, W.; Ng, K.; Stuart, C.; Cain, D.

1988-01-01

This paper describes a methodology used to implement a computerized Emergency Operating Procedures (EOP) tracking system based on artificial intelligence (AI) technologies. In AI parlance, the system is a production system in which the knowledge representation is a set of productions (IF-THEN rules) which are interpreted by an inference engine or rule interpreter. The inference engine looks for pattern matches in the rule premises which lead to a conclusion. This inferred conclusion is subsequently used in further pattern matches. By separating the knowledge representation from the inference engine, the system can readily accommodate changes to the written procedures. The system is written in the C language and is co-resident on the same computer as the Safety Parameter Display System (SPDS). The plant EOPs have been written in about 250 rules which are evaluated in less than one second using about 10-20% of the CPU. The conclusions are available to multiple users within seconds after a parameter value changes. The benefits achieved with this production rule system include compatibility with the written procedures used as the knowledge source, compatibility with control room instrumentation, compatibility with the SPDS, realtime performance, and efficient computer usage

Development of interface technology for nuclear hydrogen production system

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2012-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production economy. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

Improved production operating efficiencies through automation: Wascana Energy`s SCADA system implementation in southeast Saskatchewan

Energy Technology Data Exchange (ETDEWEB)

Knudsen, R; Foord, T; Bartle, A

1996-12-31

Supervisory control and data acquisition (SCADA) systems covering Wascana Energy`s whole southeast Saskatchewan operating area were implemented in 1994-95. The benefits of this automation were described. Operations practices were reviewed and a brief description of the system was provided. Main features of the system described included data storage/retrieval, data display, alarm group organization, alarm call out monitoring, dynagraph display, and the Microsoft SQL server computer. Automation was found to significantly change the operator`s traditional role and altered operation practices in general. SCADA systems were found to improve operating efficiencies and production performance significantly, when properly implemented and utilized. 6 refs., 3 figs.

Novel Hydrogen Production Systems Operative at Thermodynamic Extremes

Energy Technology Data Exchange (ETDEWEB)

Gunsalus, Robert

2012-11-30

We have employed a suite of molecular, bioinformatics, and biochemical tools to interrogate the thermodynamically limiting steps of H{sub 2} production from fatty acids in syntrophic communities. We also developed a new microbial model system that generates high H{sub 2} concentrations (over 17% of the gas phase) with high H{sub 2} yields of over 3 moles H{sub 2} per mole glucose. Lastly, a systems-based study of biohydrogen production in model anaerobic consortia was performed to begin identifying key regulated steps as a precursor to modeling co-metabolism. The results of these studies significantly expand our ability to predict and model systems for H{sub 2} production in novel anaerobes that are currently very poorly documented or understood.

Shorter Decentralized Attribute-Based Encryption via Extended Dual System Groups

Directory of Open Access Journals (Sweden)

Jie Zhang

2017-01-01

Full Text Available Decentralized attribute-based encryption (ABE is a special form of multiauthority ABE systems, in which no central authority and global coordination are required other than creating the common reference parameters. In this paper, we propose a new decentralized ABE in prime-order groups by using extended dual system groups. We formulate some assumptions used to prove the security of our scheme. Our proposed scheme is fully secure under the standard k-Lin assumption in random oracle model and can support any monotone access structures. Compared with existing fully secure decentralized ABE systems, our construction has shorter ciphertexts and secret keys. Moreover, fast decryption is achieved in our system, in which ciphertexts can be decrypted with a constant number of pairings.

Egg quality in layers housed in different production systems and submitted to two environmental conditions

Directory of Open Access Journals (Sweden)

JAD Barbosa Filho

2006-03-01

Full Text Available The production system using cages is a highly polemical issue in Europe, because of the space restriction imposed to laying hens. It is considered that the cage system might compromise important comfort movements, welfare and egg quality. This study evaluated egg quality and welfare of two strains of hens housed in a conventional system (battery laying cages or litter system with nest and perches, and submitted to heat stress or comfort conditions. Two groups of 20 birds (10 Hy-line W36 and 10 Hy-line Brown were submitted to two environmental conditions (26°C and 60% RH or 35°C and 70% RH and two housing systems (cages or litter in the early production phase. Egg quality was analyzed based on egg weight, eggshell thickness, specific gravity, and Haugh units. Yolk and shell contamination by Salmonella sp was also assessed. A significant (p<0.05 reduction in quality parameters was observed in eggs produced by laying hens under heat stress, mainly in the birds housed in cages.

Temperature and Humidity Profiles in the TqJoint Data Group of AIRS Version 6 Product for the Climate Model Evaluation

Science.gov (United States)

Ding, Feng; Fang, Fan; Hearty, Thomas J.; Theobald, Michael; Vollmer, Bruce; Lynnes, Christopher

2014-01-01

The Atmospheric Infrared Sounder (AIRS) mission is entering its 13th year of global observations of the atmospheric state, including temperature and humidity profiles, outgoing long-wave radiation, cloud properties, and trace gases. Thus AIRS data have been widely used, among other things, for short-term climate research and observational component for model evaluation. One instance is the fifth phase of the Coupled Model Intercomparison Project (CMIP5) which uses AIRS version 5 data in the climate model evaluation. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) is the home of processing, archiving, and distribution services for data from the AIRS mission. The GES DISC, in collaboration with the AIRS Project, released data from the version 6 algorithm in early 2013. The new algorithm represents a significant improvement over previous versions in terms of greater stability, yield, and quality of products. The ongoing Earth System Grid for next generation climate model research project, a collaborative effort of GES DISC and NASA JPL, will bring temperature and humidity profiles from AIRS version 6. The AIRS version 6 product adds a new "TqJoint" data group, which contains data for a common set of observations across water vapor and temperature at all atmospheric levels and is suitable for climate process studies. How different may the monthly temperature and humidity profiles in "TqJoint" group be from the "Standard" group where temperature and water vapor are not always valid at the same time? This study aims to answer the question by comprehensively comparing the temperature and humidity profiles from the "TqJoint" group and the "Standard" group. The comparison includes mean differences at different levels globally and over land and ocean. We are also working on examining the sampling differences between the "TqJoint" and "Standard" group using MERRA data.

Life cycle assessment of agricultural biogas production systems

Energy Technology Data Exchange (ETDEWEB)

Lansche, J.; Muller, J. [Hohenheim Univ., Stuttgart (Germany). Inst. of Agricultural Engineering, Tropical and Subtropical Group

2010-07-01

Agricultural activities are large contributors to anthropogenic greenhouse gas emissions. This paper discussed the effectiveness of reducing agricultural emissions by using liquid manure to produce biogas. When using this technique, greenhouse gas emissions from manure storage are avoided and renewable energy is generated as heat and electricity in combined heat and power plants. The purpose of this study was to evaluate the environmental impacts of biogas production systems based on the methods of life cycle assessment. The traditional use of agricultural manures was compared with conventional energy production. The Gabi 4.3 software was used to create a model to evaluate the biogas production systems according to their environmental impact. In addition to the global warming potential, other impact categories were also used to evaluate the effects of the systems in eutrophication and acidification. It was concluded that environmental benefits can be obtained in terms of greenhouse gas emissions compared to electricity production from biogas with the typical German marginal electricity mix.

High Production Volume Information System (HPVIS)

Data.gov (United States)

U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...

Characteristics of Strategies in Product/Service-System Development

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles