WorldWideScience

Sample records for production practices electronic

  1. Radiological practices using dosimetric films and electronic dosimeters in F-18 production at cyclotron complex center at IEN/CNEN

    International Nuclear Information System (INIS)

    Santos, Osvaldir P. dos; Silva, J.C.P.; Silva, Luiz Carlos Reina P. da

    2009-01-01

    The aim of this work is to evaluate, guide and correct radiological practices based on dose rate values obtained from dosimetric films and electronic dosimeters used by technicians involved in Fluorine-18 production facilities at IEN/CNEN. Standard statistical methods have been used to analyze and to evaluate these results. The comparison between these results is the first step to orient decisions concerning radiological practices. Besides, radiometric routine surveys are under evaluation in order to improve radiological control in these facility areas. The electronic dosimeters provide the technicians immediate reading and this help them take protective action immediately. So the comparison between dosimetric film and electronic dosimeters data will provide information about how the recently employed electronic dosimeters are being used and what corrections in their practical use are necessary in order to achieve correct practices. In addition the results and observations obtained will be very important to implement possible changes in radiological routine practices in order to optimize them and keep occupationally exposed individuals radiological dose rates, as low as reasonably achievable, according to ALARA principle. (author)

  2. Building an electronic resource collection a practical guide

    CERN Document Server

    Lee, Stuart D

    2004-01-01

    This practical book guides information professionals step-by-step through building and managing an electronic resource collection. It outlines the range of electronic products currently available in abstracting and indexing, bibliographic, and other services and then describes how to effectively select, evaluate and purchase them.

  3. Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing. 2. ed.

    International Nuclear Information System (INIS)

    2002-01-01

    This practice describes dosimetric procedures to be followed in facility characterization, process qualification, and routine processing for electron beam and bremsstrahlung irradiation facilities for food processing to ensure that product receives an acceptable range of absorbed doses. Other procedures related to facility characterization, process qualification, and routine product processing that may influence and be used to monitor absorbed dose in the product are also discussed. Information about effective or regulatory dose limits for food products is not within the scope of this practice (see ASTM Guides F 1355 and F 1356). The electron energy range covered in this practice is from 0.3 MeV to 10 MeV. Such electrons can be generated in continuous or pulse modes. The maximum electron energy of bremsstrahlung facilities covered in this practice is 10 MeV. A photon beam can be generated by inserting a bremsstrahlung converter in the electron beam path (See ISO/ASTM Practice 51608

  4. Practical analog electronics for technicians

    CERN Document Server

    Kimber, W A

    2013-01-01

    'Practical Analog Electronics for Technicians' not only provides an accessible introduction to electronics, but also supplies all the problems and practical activities needed to gain hands-on knowledge and experience. This emphasis on practice is surprisingly unusual in electronics texts, and has already gained Will Kimber popularity through the companion volume, 'Practical Digital Electronics for Technicians'. Written to cover the Advanced GNVQ optional unit in electronics, this book is also ideal for BTEC National, A-level electronics and City & Guilds courses. Together with 'Practical Digit

  5. The business end of health information technology. Can a fully integrated electronic health record increase provider productivity in a large community practice?

    Science.gov (United States)

    De Leon, Samantha; Connelly-Flores, Alison; Mostashari, Farzad; Shih, Sarah C

    2010-01-01

    Electronic health records (EHRs) are expected to transform and improve the way medicine is practiced. However, providers perceive many barriers toward implementing new health information technology. Specifically, they are most concerned about the potentially negative impact on their practice finances and productivity. This study compares the productivity of 75 providers at a large urban primary care practice from January 2005 to February 2009, before and after implementing an EHR system, using longitudinal mixed model analyses. While decreases in productivity were observed at the time the EHR system was implemented, most providers quickly recovered, showing increases in productivity per month shortly after EHR implementation. Overall, providers had significant productivity increases of 1.7% per month per provider from pre- to post-EHR adoption. The majority of the productivity gains occurred after the practice instituted a pay-for-performance program, enabled by the data capture of the EHRs. Coupled with pay-for-performance, EHRs can spur rapid gains in provider productivity.

  6. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  7. Comparison between dosimeter films and electronic dosimeters results obtained in F-18 production practices at IEN/CNEN

    International Nuclear Information System (INIS)

    Paulo, Osvaldir; Carlos, Luiz R.J.; Mendes, Milton

    2008-01-01

    Full text: The aim of the present work is the comparison of the dose rates values obtained from dosimeter films with the values obtained from electronic dosimeters used by radiological protection technician involved in practices with fluorine-18 production in CV-28 cyclotron at IEN/CNEN. The motivation for this work was the increase on the demand of this radiopharmaceutical. Nowadays there is an increase demand on the number of clinics and hospitals which had started to use the technique of radiodiagnostic using positron-emission tomography (PET). Therefore, the produced radionuclide activities (physics quantity) and also the complexity of the practices of radiological protection in the areas of that facility had increased a lot. The conventional statistical methods will be used to evaluate the results obtained in the analysis of the data obtained in the reading of the dosimeters. This comparative method is however a first step to taking decisions regarding radiological protection service. Therefore that the radiometric surveys of routine are taken in consideration, as well as the information from the technician of radiological protection that is working in those areas. All this data will give support to improve and implement methods and practices on the accelerators' facilities. In addition, the use of these electronic dosimeters will makes possible the technician read these dose rates received immediately during the practices and use these information you make decisions. In case of dose rates values to present above the expected the practice will be ploughed. Another point to be considered is that this work will propitiate the future updates of the procedures designated to those practices and to conduct at the radiological protection optimization. (author)

  8. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  9. Effects of Electronic Information Resources Skills Training for Lecturers on Pedagogical Practices and Research Productivity

    Science.gov (United States)

    Bhukuvhani, Crispen; Chiparausha, Blessing; Zuvalinyenga, Dorcas

    2012-01-01

    Lecturers use various electronic resources at different frequencies. The university library's information literacy skills workshops and seminars are the main sources of knowledge of accessing electronic resources. The use of electronic resources can be said to have positively affected lecturers' pedagogical practices and their work in general. The…

  10. Production processes of multiply charged ions by electron impact

    International Nuclear Information System (INIS)

    Oda, Nobuo

    1980-02-01

    First, are compared the foil or gas stripper and the ion sources utilizing electron-atom ionizing collisions, which are practically used or are under development to produce multiply charged ions. A review is made of the fundamental physical parameters such as successive ionization potentials and various ionization cross sections by electron impact, as well as the primary processes in multiply charged ion production. Multiply charged ion production processes are described for the different existing ion sources such as high temperature plasma type, ion-trapping type and discharge type. (author)

  11. Practical XHV electron gun

    International Nuclear Information System (INIS)

    Urata, Tomohiro; Ishikawa, Tsuyoshi; Cho, Boklae; Oshima, Chuhei

    2008-01-01

    We have developed practical XHV chambers of a electron gun, of which the operating pressures are 1x10 -9 Pa in a stainless-steel one and 4x10 -9 Pa in a permalloy one. By mounting a noble single-atom electron source with high brightness and high spatial coherence on the electron gun including electron optics, we demonstrated highly collimated electron-beam emission: ∼80% of the total emission current entered the electron optics. This ratio was two or three orders of magnitude higher than those of the conventional electron sources. In XHV, in addition, we confirmed stable electron emission up to 20 nA, which results in the specimen current high enough for scanning electron microscopes. (author)

  12. End-of-life resource recovery from emerging electronic products

    DEFF Research Database (Denmark)

    Parajuly, Keshav; Habib, Komal; Cimpan, Ciprian

    2016-01-01

    Integrating product design with appropriate end-of-life (EoL) processing is widely recognized to have huge potentials in improving resource recovery from electronic products. In this study, we investigate both the product characteristics and EoL processing of robotic vacuum cleaner (RVC), as a case...... of emerging electronic product, in order to understand the recovery fate of different materials and its linkage to product design. Ten different brands of RVC were dismantled and their material composition and design profiles were studied. Another 125 RVCs (349 kg) were used for an experimental trial...... at a conventional ‘shred-and-separate’ type preprocessing plant in Denmark. A detailed material flow analysis was performed throughout the recycling chain. The results show a mismatch between product design and EoL processing, and the lack of practical implementation of ‘Design for EoL’ thinking. In the best...

  13. Electronics practice technology

    International Nuclear Information System (INIS)

    1995-01-01

    This book concentrates on electronic technology. It deals with kinds of terminal and mounting such as teflon terminal, steatite terminal, and harmonica terminal, small parts like connector, plug jack, vernier dial, and coupling, termination of wiring, kinds of switch and mounting, a condenser, fixed resistor, trance coil, loading of semiconductor, mounting of high input impedance circuit, mounting of electric power circuit, manufacturing of print substrate and practice of manufacturing for print substrate. This is one of series books on electronic technology.

  14. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    1988-01-01

    Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

  15. Electronics from theory into practice

    CERN Document Server

    Fisher, J E; Hammond, P

    1976-01-01

    Electronics - From Theory Into Practice deals with design procedures in electronics and bridges the gap between theoretical knowledge and practice. It provides design examples and discusses the use of the Laplace Transform for solving engineering problems. The book introduces bipolar and field effect transistor, the unijunction transistor and the silicon-controlled rectifier, and shows how data sheets are used in design calculations. It then examines the development of integrated circuits and their characteristics. Following this discussion are chapters that contain a brief treatment of theory

  16. Practical electronics for inventors

    CERN Document Server

    Scherz, Paul

    2013-01-01

    Spark your creativity and gain the electronics skills required to transform your innovative ideas into functioning gadgets. This hands-on, updated guide outlines electrical principles and provides thorough, easy-to-follow instructions, schematics, and illustrations. Findout how to select components, safely assemble circuits, perform error tests, and build plug-and-play prototypes. Practical Electronics for Inventors, Third Edition, features all-new chapters on sensors, microcontrollers, modular electronics, and the latest software tools. Coverage includes: Resistors, capacitors, inductors, and transformers Diodes, transistors, and integrated circuits Optoelectronics, solar cells, and phototransistors Sensors, GPS modules, and touch screens Op amps, regulators, and power supplies Digital electronics, LCD displays, and logic gates Microcontrollers and prototyping platforms, including Arduino DC motors, RC servos, and stepper motors Microphones, audio amps, and speakers Modular electronics and prototyping.

  17. Radioisotope production with electron accelerators

    International Nuclear Information System (INIS)

    Brinkman, G.A.

    1978-01-01

    The production of radio isotopes with electron accelerators proceeds mainly by secondary photons (bremsstrahlung), produced in an interaction between the electrons and the Coulomb field of the nuclei of a converter. The production yields depend on: the initial electron energy, the Z and thickness of the bremsstrahlung-converter, the Z, A and the thickness of the target, the geometric set up and the cross section for a particular reaction. In this article the production is only considered for thin bremsstrahlung converters in combination with an electron 'sweep' magnet. Simple formulae are given for the calculations of production yields under standard conditions with only sigmasub(q) (the cross section per equivalent quantum) and f (the fraction of the photons that hit the target) as variables and for the calculations of the dose rate at the production point. The units in which the yields are expressed in the literature (units of sigmasub(q) dose, electron beam intensity, monitor response) are discussed. (Auth.)

  18. Carbon footprinting of electronic products

    International Nuclear Information System (INIS)

    Vasan, Arvind; Sood, Bhanu; Pecht, Michael

    2014-01-01

    Highlights: • Challenges in adopting existing CF standards for electronic products are discussed. • Carbon footprint of electronic products is underestimated using existing standards. • Multipronged approach is presented to overcome the identified challenges. • Multipronged approach demonstrated on commercial and military grade DC–DC converter system. - Abstract: In order to mitigate the effects of global warming, companies are being compelled by governments, investors, and customers to control their greenhouse gas (GHG) emissions. Similar to the European Union’s legislation on the airline industry, legislation is expected to require the electronics industry to assess their product’s carbon footprint before sale or use, as the electronics industry’s contribution to global GHG emissions is comparable to the airline industry’s contribution. Thus, it is necessary for members of the electronics industry to assess their current GHG emission rates and identify methods to reduce environmental impacts. Organizations use Carbon Footprint (CF) analysis methods to identify and quantify the GHG emissions associated with the life cycle stages of their product or services. This paper discusses the prevailing methods used by organizations to estimate the CF of their electronics products and identifies the challenges faced by the electronics industry when adopting these methods in an environment of decreasing product development cycles with complex and diffuse supply chains. We find that, as a result of the inconsistencies arising from the system boundary selection methods and databases, the use of outdated LCA approaches, and the lack of supplier’s emissions-related data, the CFs of electronic products are typically underestimated. To address these challenges, we present a comprehensive approach to the carbon footprinting of electronic products that involves the use of product-group-oriented standards, hybrid life cycle assessment techniques, and the

  19. Setting MEPS for electronic products

    International Nuclear Information System (INIS)

    Siderius, Hans-Paul

    2014-01-01

    When analysing price, performance and efficiency data for 15 consumer electronic and information and communication technology products, we found that in general price did not relate to the efficiency of the product. Prices of electronic products with comparable performance decreased over time. For products where the data allowed fitting the relationship, we found an exponential decrease in price with an average time constant of −0.30 [1/year], meaning that every year the product became 26% cheaper on average. The results imply that the classical approach of setting minimum efficiency performance standards (MEPS) by means of life cycle cost calculations cannot be applied to electronic products. Therefore, an alternative approach based on the improvement of efficiency over time and the variation in efficiency of products on the market, is presented. The concept of a policy action window can provide guidance for the decision on whether setting MEPS for a certain product is appropriate. If the (formal) procedure for setting MEPS takes longer than the policy action window, this means that the efficiency improvement will also be achieved without setting MEPS. We found short, i.e. less than three years, policy action windows for graphic cards, network attached storage products, network switches and televisions. - Highlights: • For electronic consumer products price does not relate to efficiency. • Average price decrease of selected electronic products is 26 % per year. • We give an alternative approach to life cycle cost calculations for setting MEPS. • The policy action window indicates whether setting MEPS is appropriate

  20. Electronic waste (e-waste): Material flows and management practices in Nigeria

    International Nuclear Information System (INIS)

    Nnorom, Innocent Chidi; Osibanjo, Oladele

    2008-01-01

    The growth in electrical and electronic equipment (EEE) production and consumption has been exponential in the last two decades. This has been as a result of the rapid changes in equipment features and capabilities, decrease in prices, and the growth in internet use. This creates a large volume of waste stream of obsolete electrical and electronic devices (e-waste) in developed countries. There is high level of trans-boundary movement of these devices as secondhand electronic equipment into developing countries in an attempt to bridge the 'digital divide'. The past decade has witnessed a phenomenal advancement in information and communication technology (ICT) in Nigeria, most of which rely on imported secondhand devices. This paper attempts to review the material flow of secondhand/scrap electronic devices into Nigeria, the current management practices for e-waste and the environmental and health implications of such low-end management practices. Establishment of formal recycling facilities, introduction of legislation dealing specifically with e-waste and the confirmation of the functionality of secondhand EEE prior to importation are some of the options available to the government in dealing with this difficult issue

  1. 78 FR 16824 - Tobacco Product Manufacturing Practice; Establishment of a Public Docket

    Science.gov (United States)

    2013-03-19

    ... manufacturing operations. DATES: Submit electronic or written comments on the tobacco companies' recommendations... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Chapter I [Docket No. FDA-2013-N-0227] Tobacco Product Manufacturing Practice; Establishment of a Public Docket AGENCY: Food...

  2. Effects of electronic communication in general practice

    NARCIS (Netherlands)

    van der Kam, WJ; Moorman, PW; Koppejan-Mulder, MJ

    2000-01-01

    Objective: To obtain insight into the effects of electronic communication on GPs by studying those publications in literature describing the effects of structured electronic clinical communication in general practice. Methods: We retrieved all publications in the English language indexed in MEDLINE

  3. Electronic Animal Drug Product Listing Directory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Electronic Animal Drug Product Listing Directory is a directory of all animal drug products that have been listed electronically since June 1, 2009, to comply...

  4. The knowledge, concerns and healthcare practices among physicians regarding electronic cigarettes.

    Science.gov (United States)

    Kanchustambham, Venkatkiran; Saladi, Swetha; Rodrigues, Jonathan; Fernandes, Hermina; Patolia, Setu; Santosh, Sadhashiv

    2017-07-01

    Background : Electronic cigarettes (e-cigarettes) are battery-powered devices that deliver aerosolized nicotine. With easy access and over-the-counter availability, many patients consider using electronic cigarettes for smoking cessation. Few studies have looked at long-term safety/efficacy and physician knowledge/attitudes toward e-cigarettes. Physicians have insufficient guidelines for advising their patients about e-cigarettes. Objective : 1) To identify knowledge and attitude of health care practitioners toward electronic cigarettes. 2) To identify the effect of level of training, experience and speciality on knowledge and practice of electronic cigarettes. 3) To identify factors influencing electronic cigarettes advise/prescribing practice. Methods : An anonymous online questionnaire was sent to residents, fellows, and faculty in pre-selected specialties at Saint Louis University (SLU) Hospital. Results : We received 115 responses. Nine percent reported being 'very familiar' with e-cigarettes, while 25% reported no familiarity; 18% of physicians would advise e-cigarettes as nicotine-replacement therapy if asked by patients; 91% were aware of the nicotine content of e-cigarettes, but only 20% and 39%, respectively, were aware of the presence of carcinogens and polyethylene glycol. Only 63% of respondents knew what 'vape' meant. Lack of evidence regarding long-term safety (76%), e-cigarettes as starter products for nonsmokers (50%), absence of Food and Drug Administration (FDA) regulations (51%) and marketing to youth (42%) were major concerns. Stricter regulations (54%), warning labels similar to tobacco products (53%), restricting advertising (36%), banning sales to minors (34%), and banning use in public spaces (25%) were favored as regulatory measures. More than 50% of physicians see a role for e-cigarettes as part of 'harm-reduction strategy'. Conclusions : Further research is needed to assess whether e- cigarettes could be an effective smoking

  5. Scalar electron production in e+e- annihilation

    International Nuclear Information System (INIS)

    Kuroda, M.; Kobayashi, T.; Yamada, S.; Ishikawa, K.

    1983-05-01

    The single scalar electron production process e + e - -> esup(+-) + Photino + scalar electron (scalar electron -> esup(-+) + Photino), with the detection of e + as well as e - , provides a clean method to detect scalar electrons when their masses are not lighter than the beam energy. We made a complete calculation of the process and evaluated the production cross sections. (orig.)

  6. 21 CFR 1003.2 - Defect in an electronic product.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Defect in an electronic product. 1003.2 Section... electronic product. For the purpose of this part, an electronic product shall be considered to have a defect which relates to the safety of use by reason of the emission of electronic product radiation if: (a) It...

  7. Work-Practice Changes Associated with an Electronic Emergency-Department Whiteboard

    DEFF Research Database (Denmark)

    Hertzum, Morten; Simonsen, Jesper

    2013-01-01

    , existing work practices, and the clinicians’ experience. Another change in the work practices is distributed access to whiteboard information from the computers in patient rooms. A decrease in the mental workload of the coordinating nurse was envisaged but has not emerged. Achieving more changes appears......Electronic whiteboards are introduced at emergency departments (EDs) to improve work practices. This study investigates whether the time physicians and nurses at an ED spend in patient rooms versus at the control desk increases after the introduction of an electronic whiteboard. After using...... this whiteboard for four months nurses, but not physicians, spend more of their time with the patients. With the electronic whiteboard, nurses spend 28% of their time in patient rooms and physicians 20%. Importantly, the changes facilitated by the electronic whiteboard are also dependent on implementation issues...

  8. The practical model of electron emission in the radioisotope battery by fast ions

    International Nuclear Information System (INIS)

    Erokhine, N.S.; Balebanov, V.M.

    2003-01-01

    Under the theoretical analysis of secondary-emission radioisotope source of current the estimate of energy spectrum F(E) of secondary electrons with energy E emitted from films is the important problem. This characteristic knowledge allows, in particular, studying the volt-ampere function, the dependence of electric power deposited in the load on the system parameters and so on. Since the rigorous calculations of energy spectrum F(E) are the complicated enough and labour-intensive there is necessity to elaborate the practical model which allows by the simple computer routine on the basis of generalized data (both experimental measurements and theoretical calculations) on the stopping powers and mean free path of suprathermal electrons to perform reliable express-estimates of the energy spectrum F(E) and the volt-ampere function I(V) for the concrete materials of battery emitter films. This paper devoted to description of of the practical model to calculate electron emission characteristics under the passage of fast ion fluxes from the radioisotope source through the battery emitter. The analytical approximations for the stopping power of emitter materials, the electron inelastic mean free path, the ion production of fast electrons and the probability for them to arrive the film surface are taken into account. In the cases of copper and gold films, the secondary electron escaping depth, the position of energy spectrum peak are considered in the dependence on surface potential barrier magnitude U. According to our calculations the energy spectrum peak shifted to higher electron energy under the U growth. The model described may be used for express estimates and computer simulations of fast alpha-particles and suprathermal electrons interactions with the solid state plasma of battery emitter films, to study the electron emission layer characteristics including the secondary electron escaping depth, to find the optimum conditions for excitation of nonequilibrium

  9. Green electronics manufacturing creating environmental sensible products

    CERN Document Server

    Wang, John X

    2012-01-01

    Going ""green"" is becoming a major component of the mission for electronics manufacturers worldwide. While this goal seems simplistic, it poses daunting dilemmas. Yet, to compete effectively in the global economy, manufacturers must take the initiative to drive this crucial movement. Green Electronics Manufacturing: Creating Environmental Sensible Products provides you with a complete reference to design, develop, build, and install an electronic product with special consideration for the product's environmental impacts during its whole life cycle. The author discusses how to integrate the st

  10. Innovation Management Practices, Strategic Adaptation, and Business Results: Evidence from the Electronics Industry

    Directory of Open Access Journals (Sweden)

    Alba Sánchez

    2011-06-01

    Full Text Available This research contributes to the understanding of how different practices of innovation management are related to mid- and long-term growth and profitability. Governments and regional development agencies invest relevant budgets to foster innovation in small and medium enterprises (SMEs and improve their innovation management practices to make them more competitive. Nevertheless, it is not clear what impact these practices have on a company's performance over a long period of time. We propose a model to audit and classify innovation practices and empirically test the impact of innovation practices on the firms’ long–term financial performance, using a broad sample of companies in the electronics sector. Our empirical results show that, within a regional context, companies that are similar in terms of size, position in the value chain, and ownership structure follow similar innovative practices. Furthermore, the use of a systematic approach for innovation leads to revenue growth but does not necessarily increase profit or productivity.

  11. Optimal Consumer Electronics Product Take-Back Time with Consideration of Consumer Value

    Directory of Open Access Journals (Sweden)

    Yi-Tse Fang

    2017-03-01

    Full Text Available Rapid economic growth in recent years has transformed our lifestyle to massively produce, consume, and dispose of products, especially for consumer electronics. This change has put great threat to our environment and caused natural resource depletion. Moreover, short product life cycles and quick replacements of consumer electronics create enormous electronic wastes (e-wastes. Without proper waste management, immense environmental damage is expected. In this empirical study, we notice that lots of valuable materials that can still be recycled from these used consumer electronics are left unused at home instead of being recycled at the appropriate time, which causes a low collection rate and a decrease in residual value for the used products. Therefore, it is important for the government and the recyclers to handle them efficiently by increasing the used product take-back rate. Our study develops an assessment model for customer value based on the idea of value engineering and the perspective of product life cycle. We also explore the relationship between product value and the total cost of ownership with an evaluation of their time variation, considering different usage modes for various consumer groups and different recycling award schemes (fixed and variable recycling awards. Proper take-back management is likely to create a win-win situation both for consumers and environmental protection. This study regards the notebook computer as an example to determine the optimal time for recycling laptops based on usage patterns and provides consumers a reference for when to replace their used product. The results from our modeling firstly clearly indicate that consumers with higher frequency of usage have shorter take back times and higher maximum consumer value. Secondly, a variable recycling award scheme with higher maximum consumer value is more practical than a fixed recycling award scheme.

  12. Production and Detection of Spin-Entangled Electrons in Mesoscopic Conductors

    Science.gov (United States)

    Burkard, Guido

    2006-03-01

    Electron spins are an extremely versatile form of quantum bits. When localized in quantum dots, they can form a register for quantum computation. Moreover, being attached to a charge in a mesoscopic conductor allows the electron spin to play the role of a mobile carrier of quantum information similarly to photons in optical quantum communication. Since entanglement is a basic resource in quantum communication, the production and detection of spin-entangled Einstein-Podolsky-Rosen (EPR) pairs of electrons are of great interest. Besides the practical importance, it is of fundamental interest to test quantum non-locality for electrons. I review the theoretical schemes for the entanglement production in superconductor-normal junctions [1] and other systems. The electron spin entanglement can be detected and quantified from measurements of the fluctuations (shot noise) of the charge current after the electrons have passed through an electronic beam splitter [2,3]. This two-particle interference effect is related to the Hanbury-Brown and Twiss experiment and leads to a doubling of the shot noise SI=φ=0 for spin-entangled states, allowing their differentiation from unentangled pairs. I report on the role of spin-orbit coupling (Rashba and Dresselhaus) in a complete characterization of the spin entanglement [4]. Finally, I address the effects of a discrete level spectrum in the mesoscopic leads and of backscattering and decoherence.[1] P. Recher, E. V. Sukhorukov, D. Loss, Phys. Rev. B 63, 165314 (2001)[2] G. Burkard, D. Loss, E. V. Sukhorukov, Phys. Rev. B 61, R16303 (2000)[3] G. Burkard and D. Loss, Phys. Rev. Lett.91, 087903 (2003)[4] J. C. Egues, G. Burkard, D. Saraga, J. Schliemann, D. Loss, cond-mat/0509038, to appear in Phys.Rev.B (2005).

  13. Binary encounter electron production in ion-atom collisions

    International Nuclear Information System (INIS)

    Grabbe, S.; Bhalla, C.P.; Shingal, R.

    1993-01-01

    The binary encounter electrons are produced by hard collisions between the target electrons and the energetic projectiles. Richard et al. found the measured double differential cross section for BEe production at zero degree laboratory scattering angle, in collisions of F q+ with H 2 and He targets, to increase as the charge state of the projectile was decreased. The binary encounter electron production has recently been a subject of detailed investigations. We have calculated the differential elastic scattering cross sections of electrons from several ions incorporating the exchange contribution of the continuum and the bound orbitals in addition to the static potential. The double differential binary encounter electron production cross sections are presented using the impulse approximation

  14. Optimized collection of EoL electronic products for Circular economy: A techno-economic assessment

    DEFF Research Database (Denmark)

    Angouria-Tsorochidou, Elisavet; Cimpan, Ciprian; Parajuly, Keshav

    2018-01-01

    The relevance of a circular model is widely accepted for the lifecycle management of electrical and electronic products (e-products), given the low recovery rates of valuable resources in current end-of-life (EoL) practices focused on recycling. However, missing insight into the technical...... and business potential for alternative EoL options (reuse, repair and remanufacturing) holds stakeholders from implementing circular strategies. In this context, our study first mapped by means of material flow analysis (MFA) the life cycle stages of e-products in Denmark and then performed a preliminary...

  15. Electronic Commerce: Theory and Practice

    OpenAIRE

    Išoraitė, Margarita; Miniotienė, Neringa

    2018-01-01

    Electronic commerce in the world is becoming an increasingly popular form of trade. Most shoppers start looking for products, descriptions and quality features online before buying a product. In order to provide customers with more convenience, more and more companies and existing stores are setting up their own online stores where a person can buy at a convenient time, even at night when regular stores are no longer working. Online stores allow you to save time spent by a person searching fo...

  16. Electronic tagging and integrated product intelligence

    Science.gov (United States)

    Swerdlow, Martin; Weeks, Brian

    1996-03-01

    The advent of 'intelligent,' electronic data bearing tags is set to revolutionize the way industrial and retail products are identified and tracked throughout their life cycles. The dominant system for unique identification today is the bar code, which is based on printed symbology and regulated by the International Article Numbering Association. Bar codes provide users with significant operational advantages and generate considerable added value to packaging companies, product manufacturers, distributors and retailers, across supply chains in many different sectors, from retailing, to baggage handling and industrial components, e.g., for vehicles or aircraft. Electronic tags offer the potential to: (1) record and store more complex data about the product or any modifications which occur during its life cycle; (2) access (and up-date) stored data in real time in a way which does not involve contact with the product or article; (3) overcome the limitations imposed by systems which rely on line-of-sight access to stored data. Companies are now beginning to consider how electronic data tags can be used, not only to improve the efficiency of their supply chain processes, but also to revolutionize the way they do business. This paper reviews the applications and business opportunities for electronic tags and outlines CEST's strategy for achieving an 'open' standard which will ensure that tags from different vendors can co-exist on an international basis.

  17. Looking for Guidelines for the Production of Electronic Textbooks.

    Science.gov (United States)

    Landoni, M.; Wilson, R.; Gibb, F.

    2001-01-01

    Reports the results of two studies of electronic book production, including production on the World Wide Web, and explains EBONI (Electronic Books On-screen Interface) that focuses on the evaluation of electronic resources and compiling guidelines for publishing electronic materials on the Internet for the United Kingdom higher education…

  18. Prospects for utilization of Electron Beam Accelerators (EBAs) for processing of food products

    International Nuclear Information System (INIS)

    Sarma, K.S.

    2014-01-01

    Radiation processing using gamma radiation and high energy electron beams has been in practice for more than three decades in the industry. Since gamma radiation has the ability of higher penetration in the material, large scale irradiators (mainly based on mega curies of 60 Co radioactive source) are successfully employed for treating bulk products in sterilization and food preservation applications. Electron beam, due to its low penetration, has been exploited exclusively for applications involving polymer modifications to irradiate thin finished end products like electrical cable insulations, heat shrinkable sheets, tubes, automobile tyres etc using high power EBAs (energies 0.5 MeV-4 MeV and powers around ∼100 kW). Out of around 2500 industrial EB units currently employed worldwide (with total installed power above 150 MWL 90% are in the low to medium energy range (0.5 MeV to 4 MeV) being used for polymer modifications. However, recent technological advances in the manufacturing sector of industrial high energy EBAs and product handling systems resulted in widening utilization of EB technology for applications involving bulk product irradiation

  19. Practical calculation of amplitudes for electron-impact ionization

    International Nuclear Information System (INIS)

    McCurdy, C. William; Horner, Daniel A.; Rescigno, Thomas N.

    2001-01-01

    An integral expression that is formally valid only for short-range potentials is applied to the problem of calculating the amplitude for electron-impact ionization. It is found that this expression provides a practical and accurate path to the calculation of singly differential cross sections for electron-impact ionization. Calculations are presented for the Temkin-Poet and collinear models for ionization of hydrogen by electron impact. An extension of the finite-element approach using the discrete-variable representation, appropriate for potentials with discontinuous derivatives like the Temkin-Poet interaction, is also presented

  20. Practical digital electronics for technicians

    CERN Document Server

    Kimber, Will

    2013-01-01

    Practical Digital Electronics for Technicians covers topics on analog and digital signals, logic gates, combinational logic, and Karnaugh mapping. The book discusses the characteristics and types of logic families; sequential systems including latch, bistable circuits, counters and shift registers; Schmitt triggers and multivibrators; and MSI combinational logic systems. Display devices, including LED, LCD and dot matrix display; analog and digital conversion; and examples of and equipment for digital fault finding are also considered. The book concludes by providing answers to the questions

  1. US-Total Electron Content Product (USTEC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The US Total Electron Content (US-TEC) product is designed to specify TEC over the Continental US (CONUS) in near real-time. The product uses a Kalman Filter data...

  2. Production of Medical Isotopes with Electron Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Rotsch, D A; Alford, K.; Bailey, J. L.; Bowers, D. L.; Brossard, T.; Brown, M. A.; Chemerisov, S. D.; Ehst, D.; Greene, J.; Gromov, R. G.; Grudzinski, J.J.; Hafenrichter, L.; Hebden, A. S.; Henning, W.; Heltemes, T. A.; Jerden, J.; Jonah, C. D.; Kalensky, M.; Krebs, J. F.; Makarashvili, V.; Micklich, B.; Nolen, J.; Quigley, K. J.; Schneider, J. F.; Smith, N. A.; Stepinski, D. C.; Sun, Z.; Tkac, P.; Vandegrift, G. F.; Virgo, M J; Wesolowski, K. A.; Youker, A. J.

    2017-06-01

    Radioisotopes play important roles in numerous areas ranging from medical treatments to national security and basic research. Radionuclide production technology for medical applications has been pursued since the early 1900s both commercially and in nuclear science centers. Many medical isotopes are now in routine production and are used in day-to-day medical procedures. Despite these advancements, research is accelerating around the world to improve the existing production methodologies as well as to develop novel radionuclides for new medical appli-cations. Electron linear accelerators (linacs) represent a unique method for the production of radioisotopes. Even though the basic technology has been around for decades, only recently have electron linacs capable of producing photons with sufficient energy and flux for radioisotope production become available. Housed in Argonne Nation-al Laboratory’s Low Energy Accelerator Facility (LEAF) is a newly upgraded 55 MeV/25-kW electron linear ac-celerator, capable of producing a wide range of radioiso-topes. This talk will focus on the work being performed for the production of the medical isotopes 99Mo (99Mo/99mTc generator), 67Cu, and 47Sc.

  3. Beneficial and Harmful Agile Practices for Product Quality

    OpenAIRE

    Theobald, Sven; Diebold, Philipp

    2017-01-01

    There is the widespread belief that Agile neglects the product quality. This lack of understanding how Agile processes assure the quality of the product prevents especially companies from regulated domains from an adoption of Agile. This work aims to identify which Agile Practices contribute towards product quality. Hence, data from a survey study is analyzed to identify Ag-ile Practices which are beneficial or harmful for the quality of the product. From 49 practices that were used in the su...

  4. Improving email strategies to target stress and productivity in clinical practice.

    Science.gov (United States)

    Armstrong, Melissa J

    2017-12-01

    Physician burnout is gaining increased attention in medicine and neurology and often relates to hours worked and insufficient time. One component of this is administrative burden, which relates to regulatory requirements and electronic health record tasks but may also involve increased time spent processing emails. Research in academic medical centers demonstrates that physicians face increasing inbox sizes related to mass distribution emails from various sources on top of emails required for patient care, research, and teaching. This commentary highlights the contribution of administrative tasks to physician burnout, research to date on email in medical contexts, and corporate strategies for reducing email burden that are applicable to neurology clinical practice. Increased productivity and decreased stress can be achieved by limiting the amount one accesses email, managing inbox size, and utilizing good email etiquette. Department and practice physician leaders have roles in decreasing email volume and modeling good practice.

  5. Production Practice During Language Learning Improves Comprehension.

    Science.gov (United States)

    Hopman, Elise W M; MacDonald, Maryellen C

    2018-04-01

    Language learners often spend more time comprehending than producing a new language. However, memory research suggests reasons to suspect that production practice might provide a stronger learning experience than comprehension practice. We tested the benefits of production during language learning and the degree to which this learning transfers to comprehension skill. We taught participants an artificial language containing multiple linguistic dependencies. Participants were randomly assigned to either a production- or a comprehension-learning condition, with conditions designed to balance attention demands and other known production-comprehension differences. After training, production-learning participants outperformed comprehension-learning participants on vocabulary comprehension and on comprehension tests of grammatical dependencies, even when we controlled for individual differences in vocabulary learning. This result shows that producing a language during learning can improve subsequent comprehension, which has implications for theories of memory and learning, language representations, and educational practices.

  6. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    OpenAIRE

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  7. Customer Buying Behavior : - Online shopping towards electronic product

    OpenAIRE

    Wang, Dan; Yang, Liuzi

    2010-01-01

    ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

  8. Electron microscopy and forensic practice

    Science.gov (United States)

    Kotrlý, Marek; Turková, Ivana

    2013-05-01

    Electron microanalysis in forensic practice ranks among basic applications used in investigation of traces (latents, stains, etc.) from crime scenes. Applying electron microscope allows for rapid screening and receiving initial information for a wide range of traces. SEM with EDS/WDS makes it possible to observe topography surface and morphology samples and examination of chemical components. Physical laboratory of the Institute of Criminalistics Prague use SEM especially for examination of inorganic samples, rarely for biology and other material. Recently, possibilities of electron microscopy have been extended considerably using dual systems with focused ion beam. These systems are applied mainly in study of inner micro and nanoparticles , thin layers (intersecting lines in graphical forensic examinations, analysis of layers of functional glass, etc.), study of alloys microdefects, creating 3D particles and aggregates models, etc. Automated mineralogical analyses are a great asset to analysis of mineral phases, particularly soils, similarly it holds for cathode luminescence, predominantly colour one and precise quantitative measurement of their spectral characteristics. Among latest innovations that are becoming to appear also at ordinary laboratories are TOF - SIMS systems and micro Raman spectroscopy with a resolution comparable to EDS/WDS analysis (capable of achieving similar level as through EDS/WDS analysis).

  9. Managing electronic records methods, best practices, and technologies

    CERN Document Server

    Smallwood, Robert F

    2013-01-01

    The ultimate guide to electronic records management, featuring a collaboration of expert practitioners including over 400 cited references documenting today's global trends, standards, and best practices Nearly all business records created today are electronic, and are increasing in number at breathtaking rates, yet most organizations do not have the policies and technologies in place to effectively organize, search, protect, preserve, and produce these records. Authored by an internationally recognized expert on e-records in collaboration with leading subject matter experts worldwide

  10. Electronic health record impact on productivity and efficiency in an academic pediatric ophthalmology practice.

    Science.gov (United States)

    Redd, Travis K; Read-Brown, Sarah; Choi, Dongseok; Yackel, Thomas R; Tu, Daniel C; Chiang, Michael F

    2014-12-01

    To measure the effect of electronic health record (EHR) implementation on productivity and efficiency in the pediatric ophthalmology division at an academic medical center. Four established providers were selected from the pediatric ophthalmology division at the Oregon Health & Science University Casey Eye Institute. Clinical volume was compared before and after EHR implementation for each provider. Time elapsed from chart open to completion (OTC time) and the proportion of charts completed during business hours were monitored for 3 years following implementation. Overall there was an 11% decrease in clinical volume following EHR implementation, which was not statistically significant (P = 0.18). The mean OTC time ranged from 5.5 to 28.3 hours among providers in this study, and trends over time were variable among the four providers. Forty-four percent of all charts were closed outside normal business hours (30% on weekdays, 14% on weekends). EHR implementation was associated with a negative impact on productivity and efficiency in our pediatric ophthalmology division. Copyright © 2014 American Association for Pediatric Ophthalmology and Strabismus. Published by Elsevier Inc. All rights reserved.

  11. Food Safety Practices in the Egg Products Industry.

    Science.gov (United States)

    Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

    2016-07-01

    We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

  12. Spectral-Product Methods for Electronic Structure Calculations (Preprint)

    National Research Council Canada - National Science Library

    Langhoff, P. W; Mills, J. E; Boatz, J. A

    2006-01-01

    .... The spectral-product approach to molecular electronic structure avoids the repeated evaluations of the one- and two-electron integrals required in construction of polyatomic Hamiltonian matrices...

  13. Spectral-Product Methods for Electronic Structure Calculations (Postprint)

    National Research Council Canada - National Science Library

    Langhoff, P. W; Hinde, R. J; Mills, J. D; Boatz, J. A

    2007-01-01

    .... The spectral-product approach to molecular electronic structure avoids the repeated evaluations of the one- and two-electron integrals required in construction of polyatomic Hamiltonian matrices...

  14. What factors affect the productivity and efficiency of physician practices?

    Science.gov (United States)

    Sunshine, Jonathan H; Hughes, Danny R; Meghea, Cristian; Bhargavan, Mythreyi

    2010-02-01

    Increasing the productivity and efficiency of physician practices could help relieve the rapid growth of US healthcare costs and the expected physician shortage. Radiology practices are an attractive specific focus for research on practices' productivity and efficiency because they are home to many purportedly productivity-enhancing operational technologies. This affords an opportunity to study the effect of production technology on physicians' output. As well, radiology is a leader in the general movement of physicians out of very small practices. And imaging is by the fastest-growing category of physician expenditure. Using data from 2003 to 2007 surveys of radiologists, we estimate a stochastic frontier model to study the effects of practice characteristics, such as work hours, practice size, and output mix, and technologies used in work production, on practices' productivity and efficiency. At the mean, the elasticities of output with respect to practice size and annual hours worked per full-time physician were 0.73 and 0.51, respectively. Some production technologies increase productivity by 15% to 20%; others generate no increase. Using "nighthawks"--ie, contracting out after-hours work to external firms that consolidate workflow--significantly increases practice efficiency. The general US trend toward larger practice size is unlikely to relieve cost or physician shortage pressures. The actual effect of purportedly productivity-enhancing operational technologies needs to be carefully evaluated before they are widely adopted. As the recently-developed innovations of nighthawks and hospitalists show, practices should give more attention to a possible choice to "buy," rather than "make," part of their output.

  15. Research of the internal electron-positron pair production

    International Nuclear Information System (INIS)

    Fenyes, Tibor

    1985-01-01

    The phenomenon of internal electron-positron pair production by excited nuclei is briefly reviewed. The advantages of this phenomenon in nuclear structure investigations are pointed. The new Si(Li)-Si(Li) electron spectrometer with superconducting magnetic transporter (SMS) built at ATOMKI, Hungary, was tested for detection of internal electron-positron pair production events. Proton beam of a Van de Graaff accelerator of 5 MV was used to excite the target nuclei of sup(27)Al, sup(42)Ca and sup(19)F. The internal pair production coefficients were measured and compared with the data of literature. The detection efficiency of SMS is calculated to be (37+-7)%. The test proved that the SMS is suitable for nuclear structure investigations producing electron-positron pairs. The SMS of ATOMKI is recently the top instrument all over the world in this field: its detection efficiency, energy resolution and applicability for multipolarity identification are much better than these properties of other detectors. (D.Gy.)

  16. Communication practices in inter-organisational product development

    OpenAIRE

    Paasivaara, Maria

    2005-01-01

    Geographically distributed, inter-organisational product development projects are becoming increasingly common. However, companies face challenges in managing this kind of complicated projects. Most of the challenges are related to communication. This study focused on communication needs, problems and practices in distributed inter-organisational product development projects. The main objective was to identify and describe successful communication practices. In addition, the study aimed t...

  17. Electric fields, electron production, and electron motion at the stripper foil in the Los Alamos Proton Storage Ring

    International Nuclear Information System (INIS)

    Plum, M.

    1995-01-01

    The beam instability at the Los Alamos Proton Storage Ring (PSR) most likely involves coupled oscillations between electrons and protons. For this instability to occur, there must be a strong source of electrons. Investigation of the various sources of electrons in the PSR had begun. Copious electron production is expected in the injection section because this section contains the stripper foil. This foil is mounted near the center of the beam pipe, and both circulating and injected protons pass through it, thus allowing ample opportunity for electron production. This paper discusses various mechanisms for electron production, beam-induced electric fields, and electron motion in the vicinity of the foil

  18. Copyright Policy and Practice in Electronic Reserves among ARL Libraries

    Science.gov (United States)

    Hansen, David R.; Cross, William M.; Edwards, Phillip M.

    2013-01-01

    This paper presents the results of a survey of 110 ARL institutions regarding their copyright policies for providing electronic reserves. It compiles descriptive statistics on library practice as well as coding responses to reveal trends and shared practices. Finally, it presents conclusions about policy making, decision making and risk aversion…

  19. Audio production principles practical studio applications

    CERN Document Server

    Elmosnino, Stephane

    2018-01-01

    A new and fully practical guide to all of the key topics in audio production, this book covers the entire workflow from pre-production, to recording all kinds of instruments, to mixing theories and tools, and finally to mastering.

  20. Implementing change in primary care practices using electronic medical records: a conceptual framework.

    Science.gov (United States)

    Nemeth, Lynne S; Feifer, Chris; Stuart, Gail W; Ornstein, Steven M

    2008-01-16

    Implementing change in primary care is difficult, and little practical guidance is available to assist small primary care practices. Methods to structure care and develop new roles are often needed to implement an evidence-based practice that improves care. This study explored the process of change used to implement clinical guidelines for primary and secondary prevention of cardiovascular disease in primary care practices that used a common electronic medical record (EMR). Multiple conceptual frameworks informed the design of this study designed to explain the complex phenomena of implementing change in primary care practice. Qualitative methods were used to examine the processes of change that practice members used to implement the guidelines. Purposive sampling in eight primary care practices within the Practice Partner Research Network-Translating Researching into Practice (PPRNet-TRIP II) clinical trial yielded 28 staff members and clinicians who were interviewed regarding how change in practice occurred while implementing clinical guidelines for primary and secondary prevention of cardiovascular disease and strokes. A conceptual framework for implementing clinical guidelines into primary care practice was developed through this research. Seven concepts and their relationships were modelled within this framework: leaders setting a vision with clear goals for staff to embrace; involving the team to enable the goals and vision for the practice to be achieved; enhancing communication systems to reinforce goals for patient care; developing the team to enable the staff to contribute toward practice improvement; taking small steps, encouraging practices' tests of small changes in practice; assimilating the electronic medical record to maximize clinical effectiveness, enhancing practices' use of the electronic tool they have invested in for patient care improvement; and providing feedback within a culture of improvement, leading to an iterative cycle of goal setting

  1. Electronics Come of Age: A Taxonomy for Miscellaneous and LowPower Products

    Energy Technology Data Exchange (ETDEWEB)

    Nordman, Bruce; Sanchez, Marla C.

    2006-08-01

    Most energy end uses such as space conditioning or waterheating are apparently well-defined in what is included, and haveterminology that derives from the professionals who work in the relevantfield. The topic of miscellaneous consumption lacks such clarity forhistorical and practical reasons. As this end use grows in size andinterest for the energy community, the confusion and ambiguity around thetopic is an increasing barrier to progress. This paper providesdefinitions for key terms and concepts with the intent that that futurework can be more correctly and consistently reported and interpreted. Inaddition, it provides a taxonomy of product types and categories, whichcovers both residential and commercial miscellaneous consumption. A keyelement is identification of "electronics" as a distinct energy end use.Finally, products are identified as to whether they commonly have alow-power mode, and product types that have such modes within thetraditional end uses are also listed.

  2. Accelerated electron beams for production of heat shrinkable polymeric products and PTFE wastes recovery

    Energy Technology Data Exchange (ETDEWEB)

    Marin, Gh; Marcuta, M [SC ICPE Electrostatica SA, Bucharest (Romania); Jipa, S [' Valahia' University, Targoviste (Romania)

    2001-07-01

    Radiation curing, i.e. curing under the action of ionizing radiation (predominantly electron beams) is one of the most important areas of radiation processing. There are many practical applications of electron beam processing. Our research activity was focused on two of them: radiation cross-linking of polymeric materials; recovery of PTFE wastes. For this purpose we have used: an industrial electron accelerator ILU-6 with 2.5 MeV electron energy and 40kW beam power; equipment for the transport of materials under the electron beam; and a technologic line with typical equipment for the expansion process.

  3. Accelerated electron beams for production of heat shrinkable polymeric products and PTFE wastes recovery

    International Nuclear Information System (INIS)

    Marin, Gh.; Marcuta, M.; Jipa, S.

    2001-01-01

    Radiation curing, i.e. curing under the action of ionizing radiation (predominantly electron beams) is one of the most important areas of radiation processing. There are many practical applications of electron beam processing. Our research activity was focused on two of them: radiation cross-linking of polymeric materials; recovery of PTFE wastes. For this purpose we have used: an industrial electron accelerator ILU-6 with 2.5 MeV electron energy and 40kW beam power; equipment for the transport of materials under the electron beam; and a technologic line with typical equipment for the expansion process

  4. Compensation and Production in Family Medicine by Practice Ownership

    Directory of Open Access Journals (Sweden)

    Alison C. Essary

    2016-02-01

    Full Text Available The increasing focus on high performance, patient-centered, team-based care calls for a strategy to evaluate cost-effective primary care. The trend toward physician practice consolidation further challenges the primary care health care system. Productivity measures establish provider value and help inform decision making regarding resource allocation in this evolving health care system. In this national survey of family medicine practices, physician assistant (PA productivity, as defined by mean annual patient encounters, exceeds that of both nurse practitioners (NPs and physicians in physician-owned practices and of NPs in hospital or integrated delivery system-owned practices. Total compensation, defined as salary, bonus, incentives, and honoraria for physicians, is significantly more compared to both PAs and NPs, regardless of practice ownership or productivity. Physician assistants and NPs earn equivalent compensation, regardless of practice ownership or productivity. Not only do these data support the value and role of PAs and NPs on the primary care team but also highlight differences in patient encounters between practice settings. Rural and underserved community practices, where physician-owned practices persist, also merit further consideration. Further research is needed to inform both organizational and policy decisions for the provision of high-quality, cost-effective, and accessible primary health care.

  5. Notification: Audit of Certain EPA Electronic Records Management Practices

    Science.gov (United States)

    Project #OA-FY13-0113, December 13, 2012. This memorandum is to notify you that the U.S. Environmental Protection Agency (EPA), Office of Inspector General, plans to begin an audit of certain EPA electronic records management practices.

  6. Feasibility and acceptance of electronic quality of life assessment in general practice: an implementation study

    Directory of Open Access Journals (Sweden)

    Kochen Michael M

    2009-06-01

    Full Text Available Abstract Background Patients' health related quality of life (HRQoL has rarely been systematically monitored in general practice. Electronic tools and practice training might facilitate the routine application of HRQoL questionnaires. Thorough piloting of innovative procedures is strongly recommended before the conduction of large-scale studies. Therefore, we aimed to assess i the feasibility and acceptance of HRQoL assessment using tablet computers in general practice, ii the perceived practical utility of HRQoL results and iii to identify possible barriers hindering wider application of this approach. Methods Two HRQoL questionnaires (St. George's Respiratory Questionnaire SGRQ and EORTC QLQ-C30 were electronically presented on portable tablet computers. Wireless network (WLAN integration into practice computer systems of 14 German general practices with varying infrastructure allowed automatic data exchange and the generation of a printout or a PDF file. General practitioners (GPs and practice assistants were trained in a 1-hour course, after which they could invite patients with chronic diseases to fill in the electronic questionnaire during their waiting time. We surveyed patients, practice assistants and GPs regarding their acceptance of this tool in semi-structured telephone interviews. The number of assessments, HRQoL results and interview responses were analysed using quantitative and qualitative methods. Results Over the course of 1 year, 523 patients filled in the electronic questionnaires (1–5 times; 664 total assessments. On average, results showed specific HRQoL impairments, e.g. with respect to fatigue, pain and sleep disturbances. The number of electronic assessments varied substantially between practices. A total of 280 patients, 27 practice assistants and 17 GPs participated in the telephone interviews. Almost all GPs (16/17 = 94%; 95% CI = 73–99%, most practice assistants (19/27 = 70%; 95% CI = 50–86% and the majority of

  7. Academic impact of a public electronic health database: bibliometric analysis of studies using the general practice research database.

    Directory of Open Access Journals (Sweden)

    Yu-Chun Chen

    Full Text Available BACKGROUND: Studies that use electronic health databases as research material are getting popular but the influence of a single electronic health database had not been well investigated yet. The United Kingdom's General Practice Research Database (GPRD is one of the few electronic health databases publicly available to academic researchers. This study analyzed studies that used GPRD to demonstrate the scientific production and academic impact by a single public health database. METHODOLOGY AND FINDINGS: A total of 749 studies published between 1995 and 2009 with 'General Practice Research Database' as their topics, defined as GPRD studies, were extracted from Web of Science. By the end of 2009, the GPRD had attracted 1251 authors from 22 countries and been used extensively in 749 studies published in 193 journals across 58 study fields. Each GPRD study was cited 2.7 times by successive studies. Moreover, the total number of GPRD studies increased rapidly, and it is expected to reach 1500 by 2015, twice the number accumulated till the end of 2009. Since 17 of the most prolific authors (1.4% of all authors contributed nearly half (47.9% of GPRD studies, success in conducting GPRD studies may accumulate. The GPRD was used mainly in, but not limited to, the three study fields of "Pharmacology and Pharmacy", "General and Internal Medicine", and "Public, Environmental and Occupational Health". The UK and United States were the two most active regions of GPRD studies. One-third of GRPD studies were internationally co-authored. CONCLUSIONS: A public electronic health database such as the GPRD will promote scientific production in many ways. Data owners of electronic health databases at a national level should consider how to reduce access barriers and to make data more available for research.

  8. Academic Impact of a Public Electronic Health Database: Bibliometric Analysis of Studies Using the General Practice Research Database

    Science.gov (United States)

    Chen, Yu-Chun; Wu, Jau-Ching; Haschler, Ingo; Majeed, Azeem; Chen, Tzeng-Ji; Wetter, Thomas

    2011-01-01

    Background Studies that use electronic health databases as research material are getting popular but the influence of a single electronic health database had not been well investigated yet. The United Kingdom's General Practice Research Database (GPRD) is one of the few electronic health databases publicly available to academic researchers. This study analyzed studies that used GPRD to demonstrate the scientific production and academic impact by a single public health database. Methodology and Findings A total of 749 studies published between 1995 and 2009 with ‘General Practice Research Database’ as their topics, defined as GPRD studies, were extracted from Web of Science. By the end of 2009, the GPRD had attracted 1251 authors from 22 countries and been used extensively in 749 studies published in 193 journals across 58 study fields. Each GPRD study was cited 2.7 times by successive studies. Moreover, the total number of GPRD studies increased rapidly, and it is expected to reach 1500 by 2015, twice the number accumulated till the end of 2009. Since 17 of the most prolific authors (1.4% of all authors) contributed nearly half (47.9%) of GPRD studies, success in conducting GPRD studies may accumulate. The GPRD was used mainly in, but not limited to, the three study fields of “Pharmacology and Pharmacy”, “General and Internal Medicine”, and “Public, Environmental and Occupational Health”. The UK and United States were the two most active regions of GPRD studies. One-third of GRPD studies were internationally co-authored. Conclusions A public electronic health database such as the GPRD will promote scientific production in many ways. Data owners of electronic health databases at a national level should consider how to reduce access barriers and to make data more available for research. PMID:21731733

  9. Planning and implementing electronic records management a practical guide

    CERN Document Server

    Smith, Kelvin

    2007-01-01

    Many organizations are moving away from managing records and information in paper form to setting up electronic records management (ERM) systems. Whatever the whyfor in your organization, this book provides straightforward, practical guidance on how to prepare for and enable ERM.

  10. Student Reading Practices in Print and Electronic Media

    Science.gov (United States)

    Foasberg, Nancy M.

    2014-01-01

    This paper reports a diary-based qualitative study on college students' reading habits with regard to print and electronic media. Students used a form to record information about their reading practices for twelve days, including length of reading event, location, format used, and the purpose of reading. Students tended to use print for academic…

  11. Knowledge, Attitude and Practice in Electronic Education Among ...

    African Journals Online (AJOL)

    Background: Electronic education (E-education) is used worldwide as a basic tool for medical education for its advanced improving in medical training. In spite of its wide use in the system of the medical faculties in Sudan, e-education has not taken its right place yet. Objectives: To explore knowledge, attitude and practice ...

  12. The law and practice of electronic taxation in Nigeria: The gains and ...

    African Journals Online (AJOL)

    The law and practice of electronic taxation in Nigeria: The gains and challenges. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... With e-taxation, taxpayers can conveniently pay their taxes electronically from ...

  13. Control systems for power electronics a practical guide

    CERN Document Server

    Patil, Mahesh

    2015-01-01

    The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of...

  14. Production and Decay of Excited Electrons at the LHC

    CERN Document Server

    Cakir, O; Mehdiyev, R; Belyaev, A

    2004-01-01

    We study single production of excited electrons at the CERN LHC through contact interactions of fermions. Subsequent decays of excited electrons to ordinary electrons and light fermions via gauge and contact interactions are examined. The mass range accessible with the ATLAS detector is obtained.

  15. Lean Production Practices to Enhance Organisational Performance

    Directory of Open Access Journals (Sweden)

    Shah Satya

    2017-01-01

    Full Text Available Service sector organisations are constantly overcoming the challenges facing the over-production and waste reduction within their environments. Industries are also becoming very competitive thus forcing them to seek suitable production organisation strategies with the aim towards enhancing their competitiveness and efficiency. The aim of this research study is to investigate the impact of lean production practices on the performance of service based businesses through the case study of a local baked goods supplier. The research framework adopted consists of questionnaire survey method implemented with different end users, thus covering the overall production – retail – customer cycle. The research results and analysis justify the objective of the research that lean production practices enhance the performance of the supplier company and the common tool identified were JIT (Just in Time, Value Steam Mapping (VSP and the 5S methods. The results also suggest that JIT method has a higher impact towards improvement on performance relating to quality, speed, dependability, flexibility and cost of the supplier. However, the research study also identifies that one of the major challenges faced by the organisation while adopting lean practices was the lack of commitment from top management, continuous training and employee engagement measures.

  16. Factors Influencing Electronic Clinical Information Exchange in Small Medical Group Practices

    Science.gov (United States)

    Kralewski, John E.; Zink, Therese; Boyle, Raymond

    2012-01-01

    Purpose: The purpose of this study was to identify the organizational factors that influence electronic health information exchange (HIE) by medical group practices in rural areas. Methods: A purposive sample of 8 small medical group practices in 3 experimental HIE regions were interviewed to determine the extent of clinical information exchange…

  17. First high-temperature electronics products survey 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Normann, Randy Allen

    2006-04-01

    On April 4-5, 2005, a High-Temperature Electronics Products Workshop was held. This workshop engaged a number of governmental and private industry organizations sharing a common interest in the development of commercially available, high-temperature electronics. One of the outcomes of this meeting was an agreement to conduct an industry survey of high-temperature applications. This report covers the basic results of this survey.

  18. Future opportunities in production of disposable optics and electronics

    Science.gov (United States)

    Korhonen, Raimo

    2001-05-01

    The several production methods of paper processing chain can be used, by analogy, to generate novel ideas for production of optics and electronics. Paper processing is a very fast reel-to-reel process: In the beginning of the paper web production the process is running at the speed of over thousand meters per minute and the web width can be 10 meters, and still at the later stages the speed is several hundreds of meters per minute with the web width of a couple of meters. There are several potential reel-to-reel production methods like embossing, printing, laminating and different kinds of vacuum coating, for example evaporation and sputtering. End products are complex multi-layer composite structures. The benefits from this analogy for optics and electronics would be ideas for ultra fast production, paper-like disposable and recyclable products and the integration of optics and electronics into ordinary things like books, wallpapers, tissue papers and packages. Two experiments are presented to demonstrate the possibilities. In the first experiment optical patterns are embossed directly on paper. In the second one conductive polymers are printed on paper and plastic webs. In future, a wide network of cooperation will be needed to realize all the opportunities.

  19. Analysis about the development of mobile electronic commerce: An application of production possibility frontier model

    OpenAIRE

    Uesugi, Shiro; Okada, Hitoshi

    2012-01-01

    This study aims to further develop our previous research on production possibility frontier model (PPFM). An application of model to provide analysis on the mobile commerce survey for which data was collected in Japan und Thailand is presented. PPFM looks into the consumer behaviors as the results form the perception on the relationship between Convenience and Privacy Concerns of certain electronic commerce services. From the data of consumer surveys, PPFM is expected to provide practical sol...

  20. Managing Product Usability: How companies deal with usability in the development of electronic consumer products

    OpenAIRE

    Van Kuijk, J.I.

    2010-01-01

    Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use. That the usability of electronic consumer products is under pressure is attributed to an incre...

  1. Infant feeding practices within a large electronic medical record database.

    Science.gov (United States)

    Bartsch, Emily; Park, Alison L; Young, Jacqueline; Ray, Joel G; Tu, Karen

    2018-01-02

    The emerging adoption of the electronic medical record (EMR) in primary care enables clinicians and researchers to efficiently examine epidemiological trends in child health, including infant feeding practices. We completed a population-based retrospective cohort study of 8815 singleton infants born at term in Ontario, Canada, April 2002 to March 2013. Newborn records were linked to the Electronic Medical Record Administrative data Linked Database (EMRALD™), which uses patient-level information from participating family practice EMRs across Ontario. We assessed exclusive breastfeeding patterns using an automated electronic search algorithm, with manual review of EMRs when the latter was not possible. We examined the rate of breastfeeding at visits corresponding to 2, 4 and 6 months of age, as well as sociodemographic factors associated with exclusive breastfeeding. Of the 8815 newborns, 1044 (11.8%) lacked breastfeeding information in their EMR. Rates of exclusive breastfeeding were 39.5% at 2 months, 32.4% at 4 months and 25.1% at 6 months. At age 6 months, exclusive breastfeeding rates were highest among mothers aged ≥40 vs. database.

  2. Production and applications of quasi-monoenergetic electron bunches in laser-plasma based accelerators

    International Nuclear Information System (INIS)

    Glinec, Y.; Faure, J.; Ewald, F.; Lifschitz, A.; Malka, V.

    2006-01-01

    Plasmas are attractive media for the next generation of compact particle accelerators because they can sustain electric fields larger than those in conventional accelerators by three orders of magnitude. However, until now, plasma-based accelerators have produced relatively poor quality electron beams even though for most practical applications, high quality beams are required. In particular, beams from laser plasma-based accelerators tend to have a large divergence and very large energy spreads, meaning that different particles travel at different speeds. The combination of these two problems makes it difficult to utilize these beams. Here, we demonstrate the production of high quality and high energy electron beams from laser-plasma interaction: in a distance of 3 mm, a very collimated and quasi-monoenergetic electron beam is emitted with a 0.5 nanocoulomb charge at 170 ± 20 MeV. In this regime, we have observed very nonlinear phenomena, such as self-focusing and temporal self-shortenning down to 10 fs durations. Both phenomena increase the excitation of the wakefield. The laser pulse drives a highly nonlinear wakefield, able to trap and accelerate plasma background electrons to a single energy. We will review the different regimes of electron acceleration and we will show how enhanced performances can be reached with state-of-the-art ultrashort laser systems. Applications such as gamma radiography of such electron beams will also be discussed

  3. Doppler electron velocimetry : notes on creating a practical tool.

    Energy Technology Data Exchange (ETDEWEB)

    Reu, Phillip L.; Milster, Tom (University of Arizona)

    2008-11-01

    The Doppler electron velocimeter (DEV) has been shown to be theoretically possible. This report attempts to answer the next logical question: Is it a practical instrument? The answer hinges upon whether enough electrons are available to create a time-varying Doppler current to be measured by a detector with enough sensitivity and bandwidth. The answer to both of these questions is a qualified yes. A target Doppler frequency of 1 MHz was set as a minimum rate of interest. At this target a theoretical beam current signal-to-noise ratio of 25-to-1 is shown for existing electron holography equipment. A detector is also demonstrated with a bandwidth of 1-MHz at a current of 10 pA. Additionally, a Linnik-type interferometer that would increase the available beam current is shown that would offer a more flexible arrangement for Doppler electron measurements over the traditional biprism.

  4. Development of a method of absorbed dose on-line monitoring at product processing by scanned electron beam

    International Nuclear Information System (INIS)

    Pomatsalyuk, R.I.; Shevchenko, V.A.; Tenishev, A.Eh.; Titov, D.V.; Uvarov, V.L.

    2016-01-01

    The conditions of the contact-free absorbed dose monitoring at industrial product processing by electron beam are investigated. The method is based on analysing the collected charge in a stack monitor (SM) mounted down-stream of irradiated object. Using computer simulation on the basis of a modified transport code PENELOPE-2008, it is shown that by placing a filter of low-energy electrons before SM it is possible to obtain the one-to-one correlation dependence between the monitor charge and absorbed energy of radiation in the processed object. At a certain surface density of the filter, this dependence takes on the form similar to linear. The possibility to use an air gap between the object and SM as such a filter has been demonstrated. For the conditions of radiation plant with an electron accelerator LU-10 of NSC KIPT, the optimum distance of the SM location has been established. For the practical range of the electron energy, beam scan width and surface density of the irradiated product, the constants of ''product absorbed energy-to- SM charge '' linear dependence have been determined. The capability to establish the average absorbed dose in the object moving trough the irradiation zone on the SM current is shown. The calculation data are in satisfactory agreement with the results of measurements.

  5. Unity in Diversity: Electronic Patient Record Use in Multidisciplinary Practice

    OpenAIRE

    Oborn, Eivor; Barrett, Michael; Davidson, Elizabeth

    2011-01-01

    In this paper we examine the use of electronic patient records (EPR) by clinical specialists in their development of multidisciplinary care for diagnosis and treatment of breast cancer. We develop a practice theory lens to investigate EPR use across multidisciplinary team practice. Our findings suggest that there are oppositional tendencies towards diversity in EPR use and unity which emerges across multidisciplinary work, and this influences the outcomes of EPR use. The value of this persp...

  6. Superconducting hot-electron bolometer: from the discovery of hot-electron phenomena to practical applications

    International Nuclear Information System (INIS)

    Shurakov, A; Lobanov, Y; Goltsman, G

    2016-01-01

    The discovery of hot-electron phenomena in a thin superconducting film in the last century was followed by numerous experimental studies of its appearance in different materials aiming for a better understanding of the phenomena and consequent implementation of terahertz detection systems for practical applications. In contrast to the competitors such as superconductor-insulator-superconductor tunnel junctions and Schottky diodes, the hot electron bolometer (HEB) did not demonstrate any frequency limitation of the detection mechanism. The latter, in conjunction with a decent performance, rapidly made the HEB mixer the most attractive candidate for heterodyne observations at frequencies above 1 THz. The successful operation of practical instruments (the Heinrich Hertz Telescope, the Receiver Lab Telescope, APEX, SOFIA, Hershel) ensures the importance of the HEB technology despite the lack of rigorous theoretical routine for predicting the performance. In this review, we provide a summary of experimental and theoretical studies devoted to understanding the HEB physics, and an overview of various fabrication routes and materials. (topical review)

  7. Learning within a product development working practice

    OpenAIRE

    Bang Mathiasen, John

    2012-01-01

    The subject matter chosen for this PhD, learning within a Product Development (PD) working practice, might give rise to wonder given that I have a theoretical education within supply chain management, achieved practical experience as senior supply chain manager and finally, conducted a great many lectures dealing with supply chain management. Offhand, it may seem an odd choice, but my practical experience, briefly illustrated in the below, triggered the decision to study learni...

  8. Dairy operation management practices and herd milk production.

    Science.gov (United States)

    Losinger, W C; Heinrichs, A J

    1996-03-01

    A national US survey collected data on herd milk production and management of Holstein herds. Step-wise selection identified management practices that were related to herd milk production using only operations that calculated herd milk production as well as using data from all operations. Results were similar. Milk production was highest in the West. Operations with 25% registered cattle had higher production than operations with no registered cattle. Dairy operations that reported a mean BW > 545 kg at first calving had higher mean milk production than operations with a mean BW or = 27 mo at first calving. In addition, use of the following management practices was associated with higher rolling herd average milk production: calves born in individual areas in buildings, calves hand-fed first colostrum, starter grain fed to preweaned calves, ionophores fed to heifers from birth to first calving, DHIA record-keeping system used, computerized records, and no new cattle introduced in the previous 12 mo.

  9. A search for single electron production in electron positron annihilation at E = 29 GeV

    International Nuclear Information System (INIS)

    Steele, T.R.

    1989-09-01

    This thesis presents experimental results from the ASP detector which took data on e + e - interactions in the PEP storage ring at SLAC. Its design was particularly suitable for searching for production of supersymmetric particles. The motivations for and phenomenology of Supersymmetry are discussed. In particular, the production of a single supersymmetric electron (''selectron'', e) in combination with a supersymmetric photon (''photino'', γ) would result in events in which a single electron and no other particles are observed in the detector at an e + e - collider such as PEP, provided the masses of these particles are not too large. Such events would also result from the production of a single supersymmetric W-boson (''wino'', W) in combination with a supersymmetric neutrino (''sneutrino'', ν). These processes make it possible to search for electrons and winos with masses greater than the beam energy. Observation of these unusual events would distinctly indicate the production of new particles. The ASP detector was designed to be hermetic and to provide efficient event reconstruction for low multiplicity events. The detector is described and its performance is evaluated; it is found to be well-suited to this study. The data sample collected with the detector was thoroughly analyzed for evidence of single-electron events. The various possible background processes are considered and Monte Carlo calculations of the distributions from single selectron and single wino production are presented. Using this information an efficient off-line event selection process was developed, and it is described in detail. 82 refs., 41 figs., 4 tabs

  10. Cusp electron production in 75--300 keV He+ + Ar collisions

    International Nuclear Information System (INIS)

    Plano, V.L.; Sarkadi, L.; Zavodszky, P.; Berenyi, D.; Palinkas, J.; Gulyas, L.; Takacs, E.; Toth, L.; Tanis, J.A.

    1992-01-01

    Cusp-electron production has been investigated in collisions of 75--300 keV He + with Ar. The relative contributions from electron capture to the continuum (ECC), transfer ionization (TI), and electron loss to the continuum (ELC) to the total cusp electron production were measured. Over the energy range investigated, ECC was found to decrease from about 86% to 80%, TI decreased from about 12% to 1%, and ELC increased from about 2% to 20%. The present results are consistent with earlier work for He + and O q+ projectiles

  11. Survey on neutron production by electron beam from high power CW electron linear accelerator

    International Nuclear Information System (INIS)

    Toyama, S.

    1999-04-01

    In Japan Nuclear Cycle Development Institute, the development of high current CW electron linear accelerator is in progress. It is possible for an accelerator to produce neutrons by means of a spallation and photo nuclear reactions. Application of neutron beam produced by bremsstrahlung is one of ways of the utilization for high current electron accelerator. It is actual that many electron linear accelerators which maximum energy is higher than a few hundreds MeV are used as neutron sources. In this report, an estimate of neutron production is evaluated for high current CW electron linear accelerator. The estimate is carried out by 10 MeV beam which is maximum energy limited from the regulation and rather low for neutron production. Therefore, the estimate is also done by 17 and 35 MeV beam which is possible to be accelerated. Beryllium is considered as a target for lower electron energy in addition to Lead target for higher energy, because Beryllium has low threshold energy for neutron production. The evaluation is carried out in account of the target thickness optimized by the radiation length and neutron cross section reducing the energy loss for both of electron and neutron, so as to get the maximum number of neutrons. The result of the calculations shows neutron numbers 1.9 x 10 10 , 6.1 x 10 13 and 4.8 x 10 13 (n/s), respectively, for 10, 17, and 35 MeV with low duty. The thermal removal from the target is one of critical points. The additional shielding and cooling system is necessary in order to endure radiation. A comparison with other facilities are also carried out. The estimate of neutron numbers suggests the possibility to be applied for neutron radiography and measurement of nuclear data by means of Lead spectrometer, for example. (author)

  12. Electronic cigarettes: product characterisation and design considerations

    OpenAIRE

    Brown, Christopher J; Cheng, James M

    2014-01-01

    Objective To review the available evidence regarding electronic cigarette (e-cigarette) product characterisation and design features in order to understand their potential impact on individual users and on public health. Methods Systematic literature searches in 10 reference databases were conducted through October 2013. A total of 14 articles and documents and 16 patents were included in this analysis. Results Numerous disposable and reusable e-cigarette product options exist, representing w...

  13. Pediatrician Knowledge, Attitudes, and Practice Related to Electronic Cigarettes.

    Science.gov (United States)

    Gorzkowski, Julie A; Whitmore, Regina M; Kaseeska, Kristen R; Brishke, Janet K; Klein, Jonathan D

    2016-07-01

    Electronic cigarettes (e-cigarettes) have grown rapidly in popularity, creating concerns for pediatricians and families. Evaluating pediatricians' understanding of e-cigarettes is an important first step in effectively addressing these products in practice. This qualitative study assesses pediatricians' knowledge, attitudes, and current clinical practices related to e-cigarettes. We conducted six focus groups with 37 pediatric clinicians in 2014. Groups were led by a trained facilitator using a semistructured discussion guide. Responses were recorded, transcribed, and coded to identify relevant themes. Pediatricians know that e-cigarettes generally contain nicotine and that adolescents and young adults are most likely to use them. However, most feel uninformed about the health effects of e-cigarettes and report wanting scientific evidence for safety or harm from credible sources. Pediatricians are skeptical of claims that e-cigarettes are safe, either for users or for those exposed to second-hand e-cigarette vapor or emissions. Participants noted that clinical conversations about e-cigarettes were rare, citing barriers including a lack of systematic screening, competing priorities during clinical visits, and, for some, limited confidence in their ability to address e-cigarettes during clinical encounters. No participants recommended e-cigarettes for cessation. Pediatricians feel poorly informed about e-cigarettes and are concerned about their potential health effects. While clinical discussions about e-cigarettes are rare, recent increases in their use leaves many clinicians wanting guidance about what to say to patients and families. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  14. Management practices and production constraints of central ...

    African Journals Online (AJOL)

    management practices of central highland goats and their major constraints. ... tance to improve the goat production potential and livelihood of the farmers in the study ... ing the productivity and income from keeping goats, there is a study gap in ..... and day time, possibly increasing the chance of getting contagious diseases.

  15. Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This practice sets forth requirements to ensure consistency in neutron-induced displacement damage testing of silicon and gallium arsenide electronic piece parts. This requires controls on facility, dosimetry, tester, and communications processes that affect the accuracy and reproducibility of these tests. It provides background information on the technical basis for the requirements and additional recommendations on neutron testing. In addition to neutrons, reactors are used to provide gamma-ray pulses of intensities and durations that are not achievable elsewhere. This practice also provides background information and recommendations on gamma-ray testing of electronics using nuclear reactors. 1.2 Methods are presented for ensuring and validating consistency in neutron displacement damage testing of electronic parts such as integrated circuits, transistors, and diodes. The issues identified and the controls set forth in this practice address the characterization and suitability of the radiation environm...

  16. Atomic spectral-product representations of molecular electronic structure: metric matrices and atomic-product composition of molecular eigenfunctions.

    Science.gov (United States)

    Ben-Nun, M; Mills, J D; Hinde, R J; Winstead, C L; Boatz, J A; Gallup, G A; Langhoff, P W

    2009-07-02

    Recent progress is reported in development of ab initio computational methods for the electronic structures of molecules employing the many-electron eigenstates of constituent atoms in spectral-product forms. The approach provides a universal atomic-product description of the electronic structure of matter as an alternative to more commonly employed valence-bond- or molecular-orbital-based representations. The Hamiltonian matrix in this representation is seen to comprise a sum over atomic energies and a pairwise sum over Coulombic interaction terms that depend only on the separations of the individual atomic pairs. Overall electron antisymmetry can be enforced by unitary transformation when appropriate, rather than as a possibly encumbering or unnecessary global constraint. The matrix representative of the antisymmetrizer in the spectral-product basis, which is equivalent to the metric matrix of the corresponding explicitly antisymmetric basis, provides the required transformation to antisymmetric or linearly independent states after Hamiltonian evaluation. Particular attention is focused in the present report on properties of the metric matrix and on the atomic-product compositions of molecular eigenstates as described in the spectral-product representations. Illustrative calculations are reported for simple but prototypically important diatomic (H(2), CH) and triatomic (H(3), CH(2)) molecules employing algorithms and computer codes devised recently for this purpose. This particular implementation of the approach combines Slater-orbital-based one- and two-electron integral evaluations, valence-bond constructions of standard tableau functions and matrices, and transformations to atomic eigenstate-product representations. The calculated metric matrices and corresponding potential energy surfaces obtained in this way elucidate a number of aspects of the spectral-product development, including the nature of closure in the representation, the general redundancy or

  17. Successful New Product Pricing Practices: A Contingency Approach

    NARCIS (Netherlands)

    Ingenbleek, P.T.M.; Debruyne, M.; Frambach, R.T.; Verhallen, T.M.M.

    2003-01-01

    The purpose of this study is to examine the success of new product pricing practices and the conditions upon which success is contingent. We distinguish three different pricing practices that refer to the use of information on customer value, competition, and costs respectively. Following Monroe's

  18. Successful New Product Pricing Practices: A Contingency Approach

    NARCIS (Netherlands)

    Ingenbleek, P.T.M.; Debruyne, M.; Frambach, R.T.; Verhallen, Th.M.M.

    2003-01-01

    Abstract The purpose of this study is to examine the success of new product pricing practices and the conditions upon which success is contingent. We distinguish three different pricing practices that refer to the use of information on customer value, competition, and costs respectively. Following

  19. Relating French Immersion Teacher Practices to Better Student Oral Production

    Science.gov (United States)

    Haj-Broussard, Michelle; Olson Beal, Heather K.; Boudreaux, Nicole

    2017-01-01

    This study examined seven Louisiana kindergarten immersion teachers' practices to evaluate students' oral target language production and compare the oral production elicited when different instructional practices were used over a single semester. Three rounds of three 20-minute observations in three different contexts--circle time, direct…

  20. Practical opto-electronics an illustrated guide for the laboratory

    CERN Document Server

    Protopopov, Vladimir

    2014-01-01

    This book explains how to create opto-electronic systems in a most efficient way, avoiding typical mistakes. It covers light detection techniques, imaging, interferometry, spectroscopy, modulation-demodulation, heterodyning, beam steering, and many other topics common to laboratory applications. The focus is made on self-explanatory figures rather than on words. The book guides the reader through the entire process of creating problem-specific opto-electronic systems, starting from optical source, through beam transportation optical arrangement, to photodetector and data acquisition system. The relevant basics of beam propagation and computer-based raytracing routines are also explained, and sample codes are listed. the book teaches important know-how and practical tricks that are never disclosed in scientific publications.  The book can become the reader's personal adviser in the world of opto-electronics and navigator in the ocean of the market of optical components and systems. Succinct, well-illustrate...

  1. Using electronic clinical practice audits as needs assessment to produce effective continuing medical education programming.

    Science.gov (United States)

    Klein, Doug; Staples, John; Pittman, Carmen; Stepanko, Cheryl

    2012-01-01

    The traditional needs assessment used in developing continuing medical education programs typically relies on surveying physicians and tends to only capture perceived learning needs. Instead, using tools available in electronic medical record systems to perform a clinical audit on a physician's practice highlights physician-specific practice patterns. The purpose of this study was to test the feasibility of implementing an electronic clinical audit needs assessment process for family physicians in Canada. A clinical audit of 10 preventative care interventions and 10 chronic disease interventions was performed on family physician practices in Alberta, Canada. The physicians used the results from the audit to produce personalized learning needs, which were then translated into educational programming. A total of 26 family practices and 4489 patient records were audited. Documented completion rates for interventions ranged from 13% for ensuring a patient's tetanus vaccine is current to 97% of pregnant patients receiving the recommended prenatal vitamins. Electronic medical record-based needs assessments may provide a better basis for developing continuing medical education than a more traditional survey-based needs assessment. This electronic needs assessment uses the physician's own patient outcome information to assist in determining learning objectives that reflect both perceived and unperceived needs.

  2. The EMR-scan: assessing the quality of Electronic Medical Records in general practice.

    NARCIS (Netherlands)

    Verheij, R.; Jabaaij, L.; Njoo, K.; Hoogen, H. van den; Bakker, D. de

    2008-01-01

    Background: The use of electronic medical records (EMR) in general practice has spread rapidly in the last decade (more than 90% today). Traditionally, these records are primarily used for direct patient care and for administrative purposes by the practice involved. In recent years, further

  3. Component reliability for electronic systems

    CERN Document Server

    Bajenescu, Titu-Marius I

    2010-01-01

    The main reason for the premature breakdown of today's electronic products (computers, cars, tools, appliances, etc.) is the failure of the components used to build these products. Today professionals are looking for effective ways to minimize the degradation of electronic components to help ensure longer-lasting, more technically sound products and systems. This practical book offers engineers specific guidance on how to design more reliable components and build more reliable electronic systems. Professionals learn how to optimize a virtual component prototype, accurately monitor product reliability during the entire production process, and add the burn-in and selection procedures that are the most appropriate for the intended applications. Moreover, the book helps system designers ensure that all components are correctly applied, margins are adequate, wear-out failure modes are prevented during the expected duration of life, and system interfaces cannot lead to failure.

  4. Standard practice for ultrasonic testing of wrought products

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2013-01-01

    1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

  5. A practical approach for electron monitor unit calculation

    International Nuclear Information System (INIS)

    Choi, David; Patyal, Baldev; Cho, Jongmin; Cheng, Ing Y; Nookala, Prashanth

    2009-01-01

    Electron monitor unit (MU) calculation requires measured beam data such as the relative output factor (ROF) of a cone, insert correction factor (ICF) and effective source-to-surface distance (ESD). Measuring the beam data to cover all possible clinical cases is not practical for a busy clinic because it takes tremendous time and labor. In this study, we propose a practical approach to reduce the number of data measurements without affecting accuracy. It is based on two findings of dosimetric properties of electron beams. One is that the output ratio of two inserts is independent of the cone used, and the other is that ESD is a function of field size but independent of cone and jaw opening. For the measurements to prove the findings, a parallel plate ion chamber (Markus, PTW 23343) with an electrometer (Cardinal Health 35040) was used. We measured the outputs to determine ROF, ICF and ESD of different energies (5-21 MeV). Measurements were made in a Plastic Water(TM) phantom or in water. Three linear accelerators were used: Siemens MD2 (S/N 2689), Siemens Primus (S/N 3305) and Varian Clinic 21-EX (S/N 1495). With these findings, the number of data set to be measured can be reduced to less than 20% of the data points. (note)

  6. Investigation of 123I production using electron accelerator

    International Nuclear Information System (INIS)

    Avetisyan, Albert; Avagyan, Robert; Dallakyan, Ruben; Avdalyan, Gohar; Dobrovolsky, Nikolay; Gavalyan, Vasak; Kerobyan, Ivetta; Harutyunyan, Gevorg

    2017-01-01

    The possibility of 123 I isotope production with the help of the high-intensity bremsstrahlung photons produced by the electron beam of the LUE50 linear electron accelerator at the A.I. Alikhanyan National Science Laboratory (Yerevan Physics Institute [YerPhI]) is considered. The production method has been established and shown to be successful. The 124 Xe(γ,n) 123 Xe → 123 I nuclear reaction has been investigated and the cross-section was calculated by nuclear codes TALYS 1.6 and EMPIRE 3.2. The optimum parameter of the thickness of the target was determined by GEANT4 code. For the normalized yield of 123 I, the value of 143 Bq/(mg·μA·h) has been achieved.

  7. Study on Effects of Electron Donors on Phosphine Production from Anaerobic Activated Sludge

    Directory of Open Access Journals (Sweden)

    Jianping Cao

    2017-07-01

    Full Text Available The effects of different types and concentrations of electron donors (glucose, starch, methanol and sodium acetate on the formation of phosphine from anaerobic activated sludge that has been domesticated for a prolonged period were studied in small batch experiments. The results show that types and concentrations of electron donor have significant effects on the production of phosphine from anaerobic activated sludge. Among them, glucose was the most favourable electron donor, whereas sodium acetate was the least favourable electron donor for the removal of phosphorus and the production of phosphine. Higher concentrations of electron donors were more favourable for the reduction of phosphate into phosphine, and supplying more than nine times the amount of electron donor as theoretically required for the reduction of phosphate into phosphine was favourable for the production of phosphine.

  8. Expanded function allied dental personnel and dental practice productivity and efficiency.

    Science.gov (United States)

    Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

    2012-08-01

    This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

  9. The role of safe practices in hospitals’ total factor productivity

    Directory of Open Access Journals (Sweden)

    Timothy R Huerta

    2011-01-01

    Full Text Available Timothy R Huerta1, Mark A Thompson2, Eric W Ford31Center for Health Innovation, Education, and Research, 2Rawls College of Business, Texas Tech University, Lubbock, TX, USA; 3Forsyth Medical Center Distinguished Professor of Health Care, The University of North Carolina Greensboro, Greensboro, NC, USAAbstract: The dual aims of improving safety and productivity are a major part of the health care reform movement hospital leaders must manage. Studies exploring the two phenomena conjointly and over time are critical to understanding how change in one dimension influences the other over time. A Malmquist approach is used to assess hospitals’ relative productivity levels over time. Analysis of variance (ANOVA algorithms were executed to assess whether or not the Malmquist Indices (MIs correlate with the safe practices measure. The American Hospital Association’s annual survey and the Centers for Medicare and Medicaid Services’ Case Mix Index for fiscal years 2002–2006, along with Leapfrog Group’s annual survey for 2006 were used for this study. Leapfrog Group respondents have significantly higher technological change (TC and total factor productivity (TFP than nonrespondents without sacrificing technical efficiency changes. Of the three MIs, TC (P < 0.10 and TFP (P < 0.05 had significant relationships with the National Quality Forum’s Safe Practices score. The ANOVA also indicates that the mean differences of TFP measures progressed in a monotonic fashion up the Safe Practices scale. Adherence to the National Quality Forum’s Safe Practices recommendations had a major impact on hospitals’ operating processes and productivity. Specifically, there is evidence that hospitals reporting higher Safe Practices scores had above average levels of TC and TFP gains over the period assessed. Leaders should strive for increased transparency to promote both quality improvement and increased productivity.Keywords: safety, productivity, quality, safe

  10. Production of slow-positron beams with an electron linac

    International Nuclear Information System (INIS)

    Howell, R.H.; Alvarez, R.A.; Stanek, M.

    1982-01-01

    Intense, pulsed beams of low-energy positrons have been produced by a high-energy beam from an electron linac. The production efficiency for low-energy positrons has been determined for electrons with 60 to 120 MeV energy, low-energy positron beams from a linac can be of much higher intensity than those beams currently derived from radioactive sources

  11. Practices of Productive Adult Book Clubs

    Science.gov (United States)

    Beach, Richard; Yussen, Steven

    2011-01-01

    Abstract: This article examines two adult book club members' responses to literary texts over a 23-month period to identify practices that contribute to productive book club participation. Members were interviewed regarding their book selection procedures, preparation for and perceptions of the discussions, and what they valued about the…

  12. Toward Authentic Electronic Music in the Curriculum: Connecting Teaching to Current Compositional Practices

    Science.gov (United States)

    Martin, Jeffrey

    2012-01-01

    Despite emerging efforts to teach from within authentic music making contexts, electronic music in schools generally remains detached from the practices of actual composers. Often electronic technology is regarded merely as a set of tools for learning and, as a result, many view active engagement in technology-based music making as a…

  13. The Development Of Cleaner Production Practices Between Environmental

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2003-01-01

    (DANCED), Ministry of Environment and Energy. Small and medium-scale enterprises (SMEs) were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen......, presenting figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention...... towards sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project ‘A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner...

  14. The Prevalence and Marketing of Electronic Cigarettes in Proximity to At-Risk Youths: An Investigation of Point-of-Sale Practices near Alternative High Schools

    Science.gov (United States)

    Miller, Stephen; Pike, James; Chapman, Jared; Xie, Bin; Hilton, Brian N.; Ames, Susan L.; Stacy, Alan W.

    2017-01-01

    This study examines the point-of-sale marketing practices used to promote electronic cigarettes at stores near schools that serve at-risk youths. One hundred stores selling tobacco products within a half-mile of alternative high schools in Southern California were assessed for this study. Seventy percent of stores in the sample sold electronic…

  15. Electron cyclotron resonance discharge as a source for hydrogen and deuterium ions production

    Energy Technology Data Exchange (ETDEWEB)

    Chacon Velasco, A.J. [Universidad de Pamplona, Pamplona (Colombia); Dougar-Jabon, V.D. [Universidad Industrial de Santander, Bucaramanga (Colombia)

    2004-07-01

    In this report, we describe characteristics of a ring-structure hydrogen plasma heated in electron cyclotron resonance conditions and confined in a mirror magnetic trap and discuss the relative efficiency of secondary electrons and thermo-electrons in negative hydrogen and deuterium ion production. The obtained data and calculations of the balance equations for possible reactions demonstrate that the negative ion production is realized in two stages. First, the hydrogen and deuterium molecules are excited in collisions with the plasma electrons to high-laying Rydberg or vibrational levels in the plasma volume. The second stage leads to the negative ion production through the process of dissociative attachment of low energy electrons. The low energy electrons are originated due to a bombardment of the plasma electrode by ions of one of the driven rings and thermo-emission from heated tungsten filaments. Experiments seem to indicate that the negative ion generation occurs predominantly in the limited volume filled with thermo-electrons. Estimation of the negative ion generation rate shows that the main channel of H{sup -} and D{sup -} ion production involves the process of high Rydberg state excitation. (authors)

  16. Electron cyclotron resonance discharge as a source for hydrogen and deuterium ions production

    International Nuclear Information System (INIS)

    Chacon Velasco, A.J.; Dougar-Jabon, V.D.

    2004-01-01

    In this report, we describe characteristics of a ring-structure hydrogen plasma heated in electron cyclotron resonance conditions and confined in a mirror magnetic trap and discuss the relative efficiency of secondary electrons and thermo-electrons in negative hydrogen and deuterium ion production. The obtained data and calculations of the balance equations for possible reactions demonstrate that the negative ion production is realized in two stages. First, the hydrogen and deuterium molecules are excited in collisions with the plasma electrons to high-laying Rydberg or vibrational levels in the plasma volume. The second stage leads to the negative ion production through the process of dissociative attachment of low energy electrons. The low energy electrons are originated due to a bombardment of the plasma electrode by ions of one of the driven rings and thermo-emission from heated tungsten filaments. Experiments seem to indicate that the negative ion generation occurs predominantly in the limited volume filled with thermo-electrons. Estimation of the negative ion generation rate shows that the main channel of H - and D - ion production involves the process of high Rydberg state excitation. (authors)

  17. Study of electron pair production in hadron and nuclear collisions at the CERN SPS

    CERN Multimedia

    Liebold, H-P; Sako, H; Belaga, V; Bielcikova, J; Stachel, J

    2002-01-01

    The NA45/CERES experiment investigates primarily the production of electron-positron pairs and of direct photons in proton-nucleus and nucleus-nucleus collisions. For electron-positron pairs the experiment studies the continuum in the mass region of about 0.05 to 2 GeV/c$^2$ and the vector mesons $\\varrho ,~ \\omega$, and, $\\phi$. Since for electromagnetic probes final state interactions are practically negligible these observables are unique for studying the evolution and dynamics of ultrarelativistic heavy-ion collisions from the hot and dense early stage where a quark-gluon plasma is expected to be formed to the final freeze-out stage when hadrons decouple.\\\\ \\\\ The experiment also studies the spectral distributions of charged particles, their distribution relative to the reaction plane, and identified high momentum pions. Another topic of investigation are QED pairs produced in peripheral nuclear collisions.\\\\ \\\\ The first phase of the experiment, NA45, has been concluded with two main results: i) There is...

  18. Overall Equipment Efficiency (OEE Enhancement in Manufacture of Electronic Components & Boards Industry through Total Productive Maintenance Practices

    Directory of Open Access Journals (Sweden)

    Fam Soo-Fen

    2018-01-01

    Full Text Available In an environment of intense global competition, both creative and proven strategies need to be considered in order to bring about the effectiveness and efficiency in manufacturing operation. Total Productive Maintenance (TPM is one of the effective maintenance strategy in enhancing the equipment effectiveness and to achieve a significant competitive advantage. This research paper addresses the impact of three TPM pillars namely planned maintenance (PM, autonomous maintenance (AM and focused maintenance (FM on overall equipment effectiveness (OEE of die attach equipment in the production line of semiconductor industry. The effect of TPM on the OEE is also investigated depending on the equipment types, in where die attach process consist of two models-CANON and ESEC. The primary data was collected from an organization's database and was analysed by SPSS V23. The preliminary results of the analysis showed that the performance of OEE in ESEC is better than the CANON after the implementation of TPM. The analysis also showed that out of the three TPM practices deployed, planned maintenance of equipment by production and maintenance team played the biggest role in increasing the equipment effectiveness. In conclusion, this study provides insights the importance of implementing TPM in order to succeed in a highly demanding market arena.

  19. 75 FR 65293 - Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for...

    Science.gov (United States)

    2010-10-22

    ...] Draft Guidelines on Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for... Requirements for the Registration of Veterinary Medicinal Products (VICH) has developed a draft guideline titled ``Pharmacovigilance of Veterinary Medicinal Products: Electronic Standards for Transfer of Data...

  20. Electron irradiation of dry food products

    Energy Technology Data Exchange (ETDEWEB)

    Gruenewald, Th [Bundesbahn-Zentralamt, Minden (Germany, F.R.)

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system.

  1. Electron irradiation of dry food products

    International Nuclear Information System (INIS)

    Gruenewald, Th.

    1983-01-01

    The interest of the industrial food producer is increasing in having the irradiation facility installed in the food processing chain. The throughput of the irradiator should be high and the residence time of the product in the facility should be short. These conditions can be accomplished by electron irradiators. To clarify the irradiation conditions spices taken out of the industrial process, food grade salt, sugar, and gums as models of dry food products were irradiated. With a radiation dose of 10 kGy microbial load can be reduced on 10**4 microorganisms/g. The sensory properties of the spices were not changed in an atypical way. For food grade salt and sugar changes of colour were observed which are due to lattice defects or initiated browning. The irradiation of several gums led only in some cases to an improvement of the thickness properties in the application below 50 deg C, in most cases the thickness effect was reduced. The products were packaged before irradiation. But it would be possible also to irradiate the products without packaging moving the product through the irradiation field in a closed conveyor system. (author)

  2. Study of cerenkov radiation. Production of {gamma} rays by electron accelerators; Etude du rayonnement de freinage. Production de rayons {gamma} par des accelerateurs d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This study is a critical comparison of the theories of Bremsstrahlung. Experimental results obtained by the production of {gamma} radiation with electron accelerators are compared to the theoretical results in order to estimate the extent to which the various theories are valid. (author) [French] Cette etude est une synthese des theories du rayonnement de freinage. Des resultats experimentaux, obtenus par la production de rayonnements {gamma} avec des accelerateurs d'electrons, sont compares aux resultats theoriques afin d'evaluer les domaines de validite des diverses theories. (auteur)

  3. On some practical consideration of the electron beam breakup transit time oscillator

    International Nuclear Information System (INIS)

    Kwan, T.J.T.

    1992-01-01

    The electron beam breakup transit time oscillator (BTO) makes use of the interaction between an electron beam and the azimuthally azimuthally asymmetric transverse magnetic mode (TM 110 ) of a cavity to facilitate the exchange of energy between them. Linear theory has shown a large growth rate in the regime where space-charge effects can be ignored. In this study, we have investigated the non-ideal elements in the BTO and evaluated their effects accordingly. The practical issues under consideration are electron beam quality, energy, and space-charge potential. Our calculations indicate only a modest unfavorable scalings with respect to these parameters

  4. Transport equation theory of electron backscattering and x-ray production

    International Nuclear Information System (INIS)

    Fathers, D.J.; Rez, P.

    1978-02-01

    A transport equation theory of electron backscattering and x ray production is derived and applied to energy dissipation of 30-KeV electrons for copper as a function of depth and to the energy distribution of backscattered electrons for copper, aluminum, and gold. These results are plotted and compared with experiment. Plots for variations of backscattering with atomic number and with angle of incidence, and polar plots of backscattering for 30-keV electrons at normal incidence are also presented. 10 references, seven figures

  5. Production of an electron-positron plasma in a pulsar magnetosphere

    International Nuclear Information System (INIS)

    Gurevich, A.V.; Istomin, Y.N.

    1985-01-01

    A study is made of the production of electron-positron plasma in the vacuum state (''breakdown'' of the vacuum) in the presence of an inhomogeneous electric field and a strong curvilinear magnetic field. Such conditions are encountered in the magnetosphere of a rotating neutron star. A general system of kinetic equations is derived for the electrons, positrons, and γ photons in the curvilinear magnetic field with allowance for the production of electron-positron pairs and the emission of curvature and synchrotron photons. The conditions of occurrence of ''breakdown'' are determined, and the threshold value of the jump in the value of the electric field at the surface of the star is found. The process of multiplication of particles in the magnetosphere is investigated, and the distribution functions of the electrons, positrons, and photons are found. The extinction limit of pulsars is determined. It is shown that the theory is in agreement with observational data

  6. College Students' View of Biotechnology Products and Practices in Sustainable Agriculture Systems

    Science.gov (United States)

    Anderson, William A.

    2008-01-01

    Sustainable agriculture implies the use of products and practices that sustain production, protect the environment, ensure economic viability, and maintain rural community viability. Disagreement exists as to whether or not the products and practices of modern biotechnological support agricultural sustainability. The purpose of this study was to…

  7. Building research capacity and productivity among advanced practice nurses: an evaluation of the Community of Practice model.

    Science.gov (United States)

    Gullick, Janice G; West, Sandra H

    2016-03-01

    The aim of this study was to evaluate Wenger's Community of Practice as a framework for building research capacity and productivity. While research productivity is an expected domain in influential models of advanced nursing practice, internationally it remains largely unmet. Establishment of nursing research capacity precedes productivity and consequently, there is a strong imperative to identify successful capacity-building models for nursing-focussed research in busy clinical environments. Prospective, longitudinal, qualitative descriptive design was used in this study. Bruyn's participant observation framed evaluation of a Community of Practice comprising 25 advanced practice nurses. Data from focus groups, education evaluations, blog/email transcripts and field observations, collected between 2007 and 2014, were analysed using a qualitative descriptive method. The Community of Practice model invited differing levels of participation, allowed for evolution of the research community and created a rhythm of research-related interactions and enduring research relationships. Participants described the value of research for their patients and families and the significance of the developing research culture in providing richness to their practice and visibility of their work to multidisciplinary colleagues. Extensive examples of research dissemination and enrolment in doctoral programmes further confirmed this value. A Community of Practice framework is a powerful model enabling research capacity and productivity evidenced by publication. In developing a solid foundation for a nursing research culture, it should be recognized that research skills, confidence and growth develop over an extended period of time and success depends on skilled coordination and leadership. © 2015 John Wiley & Sons Ltd.

  8. High temperature electron beam ion source for the production of single charge ions of most elements of the Periodic Table

    CERN Document Server

    Panteleev, V N; Barzakh, A E; Fedorov, D V; Ivanov, V S; Moroz, F V; Orlov, S Y; Seliverstov, D M; Stroe, L; Tecchio, L B; Volkov, Y M

    2003-01-01

    A new type of a high temperature electron beam ion source (HTEBIS) with a working temperature up to 2500 deg. C was developed for production of single charge ions of practically all elements. Off-line tests and on-line experiments making use of the developed ion source coupled with uranium carbide targets of different density, have been carried out. The ionization efficiency measured for stable atoms of many elements varied in the interval of 1-6%. Using the HTEBIS, the yields and on-line production efficiency of neutron rich isotopes of Mn, Fe, Co, Cu, Rh, Pd, Ag, Cd, In, Sn and isotopes of heavy elements Pb, Bi, Po and some others have been determined. The revealed confinement effect of the ions produced in the narrow electron beam inside a hot ion source cavity has been discussed.

  9. How do strategic decisions and operative practices affect operating room productivity?

    Science.gov (United States)

    Peltokorpi, Antti

    2011-12-01

    Surgical operating rooms are cost-intensive parts of health service production. Managing operating units efficiently is essential when hospitals and healthcare systems aim to maximize health outcomes with limited resources. Previous research about operating room management has focused on studying the effect of management practices and decisions on efficiency by utilizing mainly modeling approach or before-after analysis in single hospital case. The purpose of this research is to analyze the synergic effect of strategic decisions and operative management practices on operating room productivity and to use a multiple case study method enabling statistical hypothesis testing with empirical data. 11 hypotheses that propose connections between the use of strategic and operative practices and productivity were tested in a multi-hospital study that included 26 units. The results indicate that operative practices, such as personnel management, case scheduling and performance measurement, affect productivity more remarkably than do strategic decisions that relate to, e.g., units' size, scope or academic status. Units with different strategic positions should apply different operative practices: Focused hospital units benefit most from sophisticated case scheduling and parallel processing whereas central and ambulatory units should apply flexible working hours, incentives and multi-skilled personnel. Operating units should be more active in applying management practices which are adequate for their strategic orientation.

  10. On a method for high-energy electron beam production in proton synchrotrons

    International Nuclear Information System (INIS)

    Bessonov, E.G.; Vazdik, Ya.A.

    1979-01-01

    It is suggested to produce high-energy electron beams in such a way that the ultrarelativistic protons give an amount of their kinetic energy to the electrons of a thin target, placed inside the working volume of the proton synchrotron. The kinematics of the elastic scattering of relativistic protons on electrons at rest is treated. Evaluation of a number of elastically-scattered electrons by 1000 GeV and 3000 GeV proton beams is presented. The method under consideration is of certain practical interest and may appear to be preferable in a definite energy range of protons and electrons

  11. Stimulated Raman scattering and hot-electron production

    International Nuclear Information System (INIS)

    Drake, R.P.; Turner, R.E.; Lasinski, B.F.; Estabrook, K.G.; Campbell, E.M.; Wang, C.L.; Phillion, D.W.; Williams, E.A.; Kruer, W.L.

    1985-01-01

    High-intensity laser light can excite parametric instabilities that scatter or absorb it. One instability that can arise when laser light penetrates a plasma is sub-quarter-critical stimulated Raman (SQSR) scattering. It occurs below the quarter-critical density of the incident light and involves the decay of the incident light wave into a scattered light wave and electron plasma wave. The scattered-light wavelength ranges from 1 to 2 times that of the incident light, depending on the plasma density and temperature. This article reports studies of SQSR scattering and hot-electron production in plasmas produced by irradiating thick gold targets with up to 4 kJ of 0.53-μm light in 1-ns (FWHM) pulses. These studies have important implications for laser fusion. Hot electrons attributed to the SQSR instability can increase the difficulty of achieving high-gain implosions by penetrating and preheating the fusion fuel

  12. The Role of Everyday Life Products and Social Practices in Sustainable Transitions

    DEFF Research Database (Denmark)

    Jensen, Charlotte Louise; Remmen, Arne

    2011-01-01

    and the way we live. When opting for a low carbon society, the innovation dynamics of everyday life products as well as consumption and practice patterns become an important field of investigation. Hence, to approach consumption aspects of using and interacting with energy using products, it is important...... to kill (Røpke, 2009), so in order to make people change practice, alternate routines that work has to be proposed and accepted. Practice theory can help understanding how practices work, and thus clarifying what has to be included in a study of potentials for a sustainable transition. Social practices...... to understand what practices the products are a part of when in use. According to Røpke (2009) “Primarily, people are practitioners who indirectly, through the performance of various practices, draw on resources”. Therefore, in order to make consumers aware of their actions in an environmental perspective...

  13. Primary Care Practices' Abilities And Challenges In Using Electronic Health Record Data For Quality Improvement.

    Science.gov (United States)

    Cohen, Deborah J; Dorr, David A; Knierim, Kyle; DuBard, C Annette; Hemler, Jennifer R; Hall, Jennifer D; Marino, Miguel; Solberg, Leif I; McConnell, K John; Nichols, Len M; Nease, Donald E; Edwards, Samuel T; Wu, Winfred Y; Pham-Singer, Hang; Kho, Abel N; Phillips, Robert L; Rasmussen, Luke V; Duffy, F Daniel; Balasubramanian, Bijal A

    2018-04-01

    Federal value-based payment programs require primary care practices to conduct quality improvement activities, informed by the electronic reports on clinical quality measures that their electronic health records (EHRs) generate. To determine whether EHRs produce reports adequate to the task, we examined survey responses from 1,492 practices across twelve states, supplemented with qualitative data. Meaningful-use participation, which requires the use of a federally certified EHR, was associated with the ability to generate reports-but the reports did not necessarily support quality improvement initiatives. Practices reported numerous challenges in generating adequate reports, such as difficulty manipulating and aligning measurement time frames with quality improvement needs, lack of functionality for generating reports on electronic clinical quality measures at different levels, discordance between clinical guidelines and measures available in reports, questionable data quality, and vendors that were unreceptive to changing EHR configuration beyond federal requirements. The current state of EHR measurement functionality may be insufficient to support federal initiatives that tie payment to clinical quality measures.

  14. Control circuits in power electronics practical issues in design and implementation

    CERN Document Server

    Castilla, Miguel

    2016-01-01

    Control circuits are a key element in the operation and performance of power electronics converters. This book describes practical issues related to the design and implementation of these control circuits, and is divided into three parts - analogue control circuits, digital control circuits, and new trends in control circuits.

  15. Managing Product Usability : How companies deal with usability in the development of electronic consumer products

    NARCIS (Netherlands)

    Van Kuijk, J.I.

    2010-01-01

    Problem statement: Even though there is a large amount of methods for user-centred design, the usability of electronic consumer products (e.g., portable music players, washing machines and mobile phones) is under pressure. Usability is the extent to which a product can be used by specified users to

  16. Production of new particles in electron-positron annihilation

    International Nuclear Information System (INIS)

    Gilman, F.J.

    1977-02-01

    A number of areas are reviewed where there is important progress in the production of new particles in electron--positron annihilation, but of a more detailed quantitative nature. Charmonium states, charmed mesons, and evidence for a charged heavy lepton are covered. 50 references

  17. Factors related to the practice of breast self examination (BSE and Pap smear screening among Malaysian women workers in selected electronics factories

    Directory of Open Access Journals (Sweden)

    Shamsuddin K

    2003-05-01

    Full Text Available Abstract Background The Malaysian Ministry of Health promotes breast self-examination (BSE for all women, and Pap smear screening every three years for all sexually active women ages 20 years and above. The objectives of this paper were to examine the practice of these two screening tests among women production workers in electronics factories, and to identify factors related to practice. Methods This was a cross-sectional survey of women production workers from ten electronics factories. Data was collected by a self-administered questionnaire from a total of 1,720 women. The chi-square test, odds ratio and binomial logistic regression were used in bivariate and multivariate analysis. Results Prevalence rates were 24.4% for BSE once a month, and 18.4% for Pap smear examination within the last three years. Women who were significantly more likely to perform BSE every month were 30 years and older, Malays, with upper secondary education and above, answered the BSE question correctly, and had a Pap smear within the last three years. The proportion of women who had a Pap smear within the last three years were significantly higher among those who were older, married, with young children, on the contraceptive pill or intra-uterine device, had a medical examination within the last five years, answered the Pap smear question correctly, and performed BSE monthly. Conclusion Screening practice rates in this study were low when compared to national rates. Socio-demographic and health care factors significantly associated with screening practice are indicative of barriers which should be further understood so that more effective educational and promotional strategies could be developed.

  18. Production practices affecting worker task demands in concrete operations: A case study.

    Science.gov (United States)

    Memarian, Babak; Mitropoulos, Panagiotis

    2015-01-01

    Construction work involves significant physical, mental, and temporal task demands. Excessive task demands can have negative consequences for safety, errors and production. This exploratory study investigates the magnitude and sources of task demands on a concrete operation, and examines the effect of the production practices on the workers' task demands. The NASA Task Load Index was used to measure the perceived task demands of two work crews. The operation involved the construction of a cast-in-place concrete building under high schedule pressures. Interviews with each crew member were used to identify the main sources of the perceived demands. Extensive field observations and interviews with the supervisors and crews identified the production practices. The workers perceived different level of task demands depending on their role. The production practices influenced the task demands in two ways: (1) practices related to work organization, task design, resource management, and crew management mitigated the task demands; and (2) other practices related to work planning and crew management increased the crew's ability to cope with and adapt to high task demands. The findings identify production practices that regulate the workers' task demands. The effect of task demands on performance is mitigated by the ability to cope with high demands.

  19. The effect of production system and management practices on the ...

    African Journals Online (AJOL)

    The effect of production system and management practices on the environmental impact, quality and safety of milk and dairy products. ... that are important during the production of processed dairy foods such as cheese or yoghurt. There is no ...

  20. Practical aspects of the pasteurization of sewage sludge by electron irradiation

    International Nuclear Information System (INIS)

    Tauber, M.; Hofmann, E.G.; Offermann, B.P.

    1975-01-01

    Recently the demand for disinfection of sewage sludge has increased. Investigations have shown that the radiation pasteurization of sludge is the most preferable treatment. Up to now most of these investigations have been made with 60 Co radiation sources. However, it is not easy to run an economic and safe process line for the irradiation of sewage sludge with such isotope sources. Powerful electron accelerators are now available and the main features of the irradiation of sewage sludge with fast electrons are discussed and the design parameters of such installations described. From the standpoint of the limited electron penetration into the material it is desirable to use high-energy electrons (up to 1.5 MeV) whereas from an economic standpoint it may be better to use electrons of lower energies (0.5 to 1 MeV) and to homogenize the sewage sludge to the required thickness. The following parameters must be considered for a commercial process line: effectivity of the electron radiation process; limited penetration of electrons into the material to be irradiated; beam power of electron accelerators required for sewage sludge treatment; safety aspects; economics of the process with regard to electron energy, power and homogenization of the material; and environmental aspects of the installations. The practical aspects of commercial process lines for electron irradiation of sewage sludge and the design of handling equipment are discussed in relation to these parameters. (author)

  1. Certainty and Uncertainty in the Practice of Science: Electrons, Muons and Taus

    International Nuclear Information System (INIS)

    Perl, Martin

    1999-01-01

    During the past one hundred years three related elementary particles-the electron, the muon, and the tau-were discovered by very different scientific techniques. The author, who received the Wolf Prize and the Nobel Prize for the discovery of the tau, uses this history to discuss certainty and uncertainty in the practice of science. While the emphasis is on the practice of scientific research, the paper also explains for the non-physicist some basic ideas in elementary particle science

  2. Certainty and Uncertainty in the Practice of Science: Electrons, Muons and Taus

    Energy Technology Data Exchange (ETDEWEB)

    Perl, Martin

    1999-01-29

    During the past one hundred years three related elementary particles-the electron, the muon, and the tau-were discovered by very different scientific techniques. The author, who received the Wolf Prize and the Nobel Prize for the discovery of the tau, uses this history to discuss certainty and uncertainty in the practice of science. While the emphasis is on the practice of scientific research, the paper also explains for the non-physicist some basic ideas in elementary particle science.

  3. Single Production of Excited Neutrino at Clic based Electron Photon Colliders

    International Nuclear Information System (INIS)

    Kirca, Z.

    2004-01-01

    The discovery of excited quarks and leptons, as predicted by composite models, would supply convincing evidence for substructure of fermions. Electron-photon interactions at very high energies provide ideal conditions to look for excited states of first generations offermions. In particular, in magnetic- transition coupling the electron to a gauge bo son would allow for single production of excited neutrinos (ν * ) through t-channel W boson exchange. In this work, (ν * ) production followed by the electroweak radiative decays ν * →νγ, ν * →eW, ν * →νZ is presented. The production cross sections and P T distributions of excited neutrino are studied for CLlC

  4. Work-Life Balance, Management Practices and Productivity

    OpenAIRE

    Nick Bloom; Tobias Kretschmer; John Van Reenen

    2006-01-01

    Do “Anglo-Saxon” management practices generate higher productivity only at the expense of lousy work-life balance (WLB) for workers? Many critics of “neo-libéralisme sauvage” have argued that increased competition from globalisation is damaging employees’ quality of life. Others have argued the opposite that improving work-life balance is actually a competitive tool that companies can use to raise productivity. We try to shed some empirical light on these issues using an innovative survey too...

  5. A Survey of Electronic Serials Managers Reveals Diversity in Practice

    Directory of Open Access Journals (Sweden)

    Laura Costello

    2014-09-01

    Full Text Available A Review of: Branscome, B. A. (2013. Management of electronic serials in academic libraries: The results of an online survey. Serials Review, 39(4, 216-226. http://dx.doi.org/10.1016/j.serrev.2013.10.004 Abstract Objective – To examine industry standards for the management of electronic serials and measure the adoption of electronic serials over print. Design – Survey questionnaire. Setting – Email lists aimed at academic librarians working in serials management. Subjects – 195 self-selected subscribers to serials email lists. Methods – The author created a 20 question survey that consisted primarily of closed-ended questions pertaining to the collection demographics, staff, budget, and tools of serials management groups in academic libraries. The survey was conducted via Survey Monkey and examined using the analytical features of the tool. Participants remained anonymous and the survey questions did not ask them to reveal identifiable information about their libraries. Main Results – Collection demographics questions revealed that 78% of surveyed librarians estimated that print-only collections represented 40% or fewer of their serials holdings. The author observed diversity in the factors that influence print to digital transitions in academic libraries. However 71.5% of participants indicated that publisher technology support like IP authentication was required before adopting digital subscriptions. A lack of standardization also marked serials workflows, department responsibilities, and department titles. The author did not find a correlation between serials budget and the enrollment size of the institution. Participants reported that they used tools from popular serials management vendors like Serials Solutions, Innovative Interfaces, EBSCO, and Ex Libris, but most indicated that they used more than one tool for serials management. Participants specified 52 unique serials management products used in their libraries. Conclusion

  6. Good manufacturing practices of artisanal products in Northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Medeiros, J.M.S.D

    2017-05-01

    Full Text Available This review provides an overview of the importance of good manufacturing practices in the elaboration of artisanal products, aiming to generate a discussion about this subject. The elaboration of artisanal food has been gaining prominence in several countries of the world since these products carry the identity and culture of a place. The traditional and artisanal way of manufacturing provides the food with a variation in its characteristics, which makes it peculiar in comparison to its similar, pleasing the most diverse demands of consumers. In addition, they are considered healthier and natural foods. In the Northeast of Brazil, these products are highlighted by the significant commercialization, being sources of income generation for the region. Among the most prominent products are the coalho and butter types cheeses, bottled butter and carne de sol. Despite the economic and cultural importance of these products, the traditional way of manufacturing, without proper hygiene care, can be a limiting factor for the formal commercialization of these products. Therefore, adopting good manufacturing practices at artisanal food processing places may be the first step towards the production of higher quality products that meet the requirements of the legislation but retain their artisanal manufacturing characteristics.

  7. Good practice in the production of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Cruz Arencibia, Jorge

    2012-01-01

    In the paper the evolution of concepts regarding the quality of the pharmaceutical products is analyzed in the framework of the production of radiopharmaceuticals at CENTIS. The world trends range from the quality control of the fi nal product to the comprehensive concept of quality management. It is concluded from the analysis that CENTIS has an appropriate system of Good Manufacturing Practice as a result of 15 years of systematic, growing and qualified attention to the issue, in correspondence with the world tendencies and the continuous support of CECMED, the Cuban regulatory authority. That is certified by the fact that all the production processes of CENTIS have been licensed and all the CENTIS products in the market have been registered. The existing conditions at CENTIS are favorable to establish and certificate a Quality Management System. (author)

  8. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... the widely published normative advice. While there may be several reasons for discrepancies between research results and prac-tice this paper focuses on problems of implementation of the identified success factors. Within the research area of NPD-management there has been numerous surveys as well as case...

  9. Antibiotics in Dutch General Practice: electronic GP databases and national reimbursement data.

    NARCIS (Netherlands)

    Kuyvenhoven, M.; Akkerman, A.E.; Dijk, L. van; Verheij, T.J.M.

    2007-01-01

    Background. A variety of databases such as data from registration forms, electronic patient records and claims data of health insurance companies, are used in evaluation studies on antimicrobial management in general practice. Aim. To assess to which degree prescribing figures for systemic

  10. Calculations of time-of-flight aberrations in practical electrostatic electron lenses using the differential algebraic method

    International Nuclear Information System (INIS)

    Kang, Yongfeng; Zhao, Jingyi; Tang, Tiantong

    2013-01-01

    The high order time-of-flight (TOF) aberrations in a practical electrostatic electron lens are calculated using the differential algebraic (DA) method. The electrostatic fields of the electrostatic lens, which are calculated by the FEM methods, are in the form of discrete arrays. Thus, the proposed DA method is applicable for engineering designs, and programs are written to compute up to fifth order TOF aberrations of practical electrostatic electron lenses. An example is given, and TOF aberrations up to the fifth order are calculated. It is proven that the numerical results for the electrostatic fields in the form of discrete arrays have a good accuracy compared with the theoretical solutions. The accuracy is limited only by the accuracy of the numerical computation of the fields and the numerical computation algorithms for interpolation and integration. Finally, a practical electrostatic electron lens is analysed and discussed as an example.

  11. Semi-Spontaneous Oral Text Production: Measurements in Clinical Practice

    Science.gov (United States)

    Lind, Marianne; Kristoffersen, Kristian Emil; Moen, Inger; Simonsen, Hanne Gram

    2009-01-01

    Functionally relevant assessment of the language production of speakers with aphasia should include assessment of connected speech production. Despite the ecological validity of everyday conversations, more controlled and monological types of texts may be easier to obtain and analyse in clinical practice. This article discusses some simple…

  12. Effects of discharge cleaning on the production of runaway electrons in TORTUS tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Cross, R C; Liu, J R; Giannone, L. (Sydney Univ. (Australia). School of Physics)

    1983-06-01

    Experimental results are presented on the production of runaway electrons as a function of wall cleanliness in the TORTUS tokamak. When the walls are clean, the production rate decreases as the filling pressure increases. When the walls are contaminated by oxygen, the production rate can increase when the filling pressure is increased, owing to the production of water vapour during tokamak discharges. These results resolve the differences reported in the literature on the production of runaways as a function of filling pressure. It is also observed that the runaway electron instability seen in other devices is suppressed when the walls are discharge-cleaned.

  13. A model for the electronic support of practice-based research networks.

    Science.gov (United States)

    Peterson, Kevin A; Delaney, Brendan C; Arvanitis, Theodoros N; Taweel, Adel; Sandberg, Elisabeth A; Speedie, Stuart; Richard Hobbs, F D

    2012-01-01

    The principal goal of the electronic Primary Care Research Network (ePCRN) is to enable the development of an electronic infrastructure to support clinical research activities in primary care practice-based research networks (PBRNs). We describe the model that the ePCRN developed to enhance the growth and to expand the reach of PBRN research. Use cases and activity diagrams were developed from interviews with key informants from 11 PBRNs from the United States and United Kingdom. Discrete functions were identified and aggregated into logical components. Interaction diagrams were created, and an overall composite diagram was constructed describing the proposed software behavior. Software for each component was written and aggregated, and the resulting prototype application was pilot tested for feasibility. A practical model was then created by separating application activities into distinct software packages based on existing PBRN business rules, hardware requirements, network requirements, and security concerns. We present an information architecture that provides for essential interactions, activities, data flows, and structural elements necessary for providing support for PBRN translational research activities. The model describes research information exchange between investigators and clusters of independent data sites supported by a contracted research director. The model was designed to support recruitment for clinical trials, collection of aggregated anonymous data, and retrieval of identifiable data from previously consented patients across hundreds of practices. The proposed model advances our understanding of the fundamental roles and activities of PBRNs and defines the information exchange commonly used by PBRNs to successfully engage community health care clinicians in translational research activities. By describing the network architecture in a language familiar to that used by software developers, the model provides an important foundation for the

  14. Farmers' adoption of improved vegetable production practices under ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-29

    Dec 29, 2008 ... the annual income of the PFs and NPFs, respectively. ... Key words: Adoption, improved vegetable, production practices, farmers and national fadama ..... so, fixed cost components such as depreciation, insurance, repairs,.

  15. Strategies to reduce blood product utilization in obstetric practice.

    Science.gov (United States)

    Neb, Holger; Zacharowski, Kai; Meybohm, Patrick

    2017-06-01

    Patient blood management (PBM) aims to improve patient outcome and safety by reducing the number of unnecessary RBC transfusions and vitalizing patient-specific anemia reserves. Although PBM is increasingly recognized as best clinical practice in elective surgery, implementation of PBM is restrained in the setting of obstetrics. This review summarizes recent findings to reduce blood product utilization in obstetric practice. PBM-related evidence-based benefits should be urgently adopted in the field of obstetric medicine. Intravenous iron can be considered a safe, effective strategy to replenish iron stores and to correct both pregnancy-related and hemorrhage-related iron deficiency anemia. In addition to surgical techniques and the use of uterotonics, recent findings support early administration of tranexamic acid, fibrinogen and a coagulation factor concentrate-based, viscoelastically guided practice in case of peripartum hemorrhage to manage coagulopathy. In patients with cesarean section, autologous red cell blood salvage may reduce blood product utilization, although its use in this setting is controversial. Implementation of PBM in obstetric practice offers large potential to reduce blood loss and transfusion requirements of allogeneic blood products, even though large clinical trials are lacking in this specific field. Intravenous iron supplementation may be suggested to increase peripartum hemoglobin levels. Additionally, tranexamic acid and point-of-care-guided supplementation of coagulation factors are potent methods to reduce unnecessary blood loss and blood transfusions in obstetrics.

  16. Crop production management practices as a cause for low water ...

    African Journals Online (AJOL)

    Limited knowledge of irrigated crop production among farmers has been identified as one of the constraints to improved crop productivity, but research that investigates the relationship between farmer practices and productivity is lacking. A monitoring study was therefore conducted at the Zanyokwe Irrigation Scheme (ZIS) ...

  17. Considerations for use of dental photography and electronic media in dental education and clinical practice.

    Science.gov (United States)

    Stieber, Jane C; Nelson, Travis; Huebner, Colleen E

    2015-04-01

    Photography and electronic media are indispensable tools for dental education and clinical practice. Although previous research has focused on privacy issues and general strategies to protect patient privacy when sharing clinical photographs for educational purposes, there are no published recommendations for developing a functional, privacy-compliant institutional framework for the capture, storage, transfer, and use of clinical photographs and other electronic media. The aims of this study were to research patient rights relating to electronic media and propose a framework for the use of patient media in education and clinical care. After a review of the relevant literature and consultation with the University of Washington's director of privacy and compliance and assistant attorney general, the researchers developed a privacy-compliant framework to ensure appropriate capture, storage, transfer, and use of clinical photography and electronic media. A four-part framework was created to guide the use of patient media that reflects considerations of patient autonomy and privacy, informed consent, capture and storage of media, and its transfer, use, and display. The best practices proposed for capture, storage, transfer, and use of clinical photographs and electronic media adhere to the health care code of ethics (based on patient autonomy, nonmaleficence, beneficence, justice, and veracity), which is most effectively upheld by a practical framework designed to protect patients and limit institutional liability. Educators have the opportunity and duty to convey these principles to students who will become the next generation of dentists, researchers, and educators.

  18. Theory and practice of uncommon molecular electronic configurations.

    Science.gov (United States)

    Gryn'ova, Ganna; Coote, Michelle L; Corminboeuf, Clemence

    2015-01-01

    The electronic configuration of the molecule is the foundation of its structure and reactivity. The spin state is one of the key characteristics arising from the ordering of electrons within the molecule's set of orbitals. Organic molecules that have open-shell ground states and interesting physicochemical properties, particularly those influencing their spin alignment, are of immense interest within the up-and-coming field of molecular electronics. In this advanced review, we scrutinize various qualitative rules of orbital occupation and spin alignment, viz., the aufbau principle, Hund's multiplicity rule, and dynamic spin polarization concept, through the prism of quantum mechanics. While such rules hold in selected simple cases, in general the spin state of a system depends on a combination of electronic factors that include Coulomb and Pauli repulsion, nuclear attraction, kinetic energy, orbital relaxation, and static correlation. A number of fascinating chemical systems with spin states that fluctuate between triplet and open-shell singlet, and are responsive to irradiation, pH, and other external stimuli, are highlighted. In addition, we outline a range of organic molecules with intriguing non-aufbau orbital configurations. In such quasi-closed-shell systems, the singly occupied molecular orbital (SOMO) is energetically lower than one or more doubly occupied orbitals. As a result, the SOMO is not affected by electron attachment to or removal from the molecule, and the products of such redox processes are polyradicals. These peculiar species possess attractive conductive and magnetic properties, and a number of them that have already been developed into molecular electronics applications are highlighted in this review. WIREs Comput Mol Sci 2015, 5:440-459. doi: 10.1002/wcms.1233 For further resources related to this article, please visit the WIREs website.

  19. 78 FR 4307 - Current Good Manufacturing Practice Requirements for Combination Products

    Science.gov (United States)

    2013-01-22

    ...-2009-N-0435] Current Good Manufacturing Practice Requirements for Combination Products AGENCY: Food and...) is issuing this regulation on the current good manufacturing practice (CGMP) requirements applicable... this subpart? (Sec. 4.2) D. What current good manufacturing practice requirements apply to my...

  20. Integrated methodology for production related risk management of vehicle electronics (IMPROVE)

    OpenAIRE

    Geis, Stefan Rafael

    2006-01-01

    This scientific work is designated to provide an innovative and integrated conceptional approach to improve the assembly quality of automotive electronics. This is achieved by the reduction and elimination of production related risks of automotive electronics and the implementation of a sustainable solution process. The focus is the development and implementation of an integrated technical risk management approach for automotive electronics throughout the vehicle life cycle and the vehicle pr...

  1. Relativistic total and differential cross section proton--proton electron--positron pair production calculation

    International Nuclear Information System (INIS)

    Rubinstein, J.E.

    1976-01-01

    Circle Feynman diagrams for a specific permutation of variables along with their corresponding algebraic expressions are presented to evaluate [H] 2 for proton-proton electron-positron pair production. A Monte Carlo integration technique is introduced and is used to set up the multiple integral expression for the total pair production cross section. The technique is first applied to the Compton scattering problem and then to an arbitrary multiple integral. The relativistic total cross section for proton-proton electron-positron pair production was calculated for eight different values of incident proton energy. A variety of differential cross sections were calculated for the above energies. Angular differential cross section distributions are presented for the electron, positron, and proton. Invariant mass differential cross section distributions are done both with and without the presence of [H] 2 . Both WGHT and log 10 (TOTAL) distributions were also obtained. The general behavioral trends of the total and differential cross sections for proton-proton electron-positron pair production are presented. The range of validity for this calculation is from 0 to about 200 MeV

  2. Adoption of Recommended Rice Production Practices among ...

    African Journals Online (AJOL)

    User

    rice production practices by women farmers in Nasarawa State. A total of 203 women rice farmers were selected for the study using multi- ... RRPPs were unavailability of credit facilities, poor marketing system and ... economy which provides employment opportunity for about 70-80 percent of the total ..... shown in Table 1.

  3. Effects of discharge cleaning on the production of runaway electrons in TORTUS tokamak

    International Nuclear Information System (INIS)

    Cross, R.C.; Liu, J.R.; Giannone, L.

    1983-01-01

    Experimental results are presented on the production of runaway electrons as a function of wall cleanliness in the TORTUS tokamak. When the walls are clean, the production rate decreases as the filling pressure increases. When the walls are contaminated by oxygen, the production rate can increase when the filling pressure is increased, owing to the production of water vapour during tokamak discharges. These results resolve the differences reported in the literature on the production of runaways as a function of filling pressure. It is also observed that the runaway electron instability seen in other devices is suppressed when the walls are discharge-cleaned. (author)

  4. Improving farming practices reduces the carbon footprint of spring wheat production.

    Science.gov (United States)

    Gan, Yantai; Liang, Chang; Chai, Qiang; Lemke, Reynald L; Campbell, Con A; Zentner, Robert P

    2014-11-18

    Wheat is one of the world's most favoured food sources, reaching millions of people on a daily basis. However, its production has climatic consequences. Fuel, inorganic fertilizers and pesticides used in wheat production emit greenhouse gases that can contribute negatively to climate change. It is unknown whether adopting alternative farming practices will increase crop yield while reducing carbon emissions. Here we quantify the carbon footprint of alternative wheat production systems suited to semiarid environments. We find that integrating improved farming practices (that is, fertilizing crops based on soil tests, reducing summerfallow frequencies and rotating cereals with grain legumes) lowers wheat carbon footprint effectively, averaging -256 kg CO2 eq ha(-1) per year. For each kg of wheat grain produced, a net 0.027-0.377 kg CO2 eq is sequestered into the soil. With the suite of improved farming practices, wheat takes up more CO2 from the atmosphere than is actually emitted during its production.

  5. Multi-Electron Production at High Transverse Momenta in ep Collisions at HERA

    CERN Document Server

    Aktas, A.; Anthonis, T.; Asmone, A.; Babaev, A.; Backovic, S.; Bahr, J.; Baranov, P.; Barrelet, E.; Bartel, W.; Baumgartner, S.; Becker, J.; Beckingham, M.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, C.; Berndt, T.; Bizot, J.C.; Bohme, J.; Boenig, M.O.; Boudry, V.; Bracinik, J.; Braunschweig, W.; Brisson, V.; Broker, H.B.; Brown, D.P.; Bruncko, D.; Busser, F.W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Caron, S.; Cassol-Brunner, F.; Chekelian, V.; Clarke, D.; Collard, C.; Contreras, J.G.; Coppens, Y.R.; Coughlan, J.A.; Cousinou, M.C.; Cox, B.E.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Dau, W.D.; Daum, K.; Delcourt, B.; Delerue, N.; Demirchyan, R.; De Roeck, A.; De Wolf, E.A.; Diaconu, C.; Dingfelder, J.; Dodonov, V.; Dowell, J.D.; Dubak, A.; Duprel, C.; Eckerlin, Guenter; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Ellerbrock, M.; Elsen, E.; Erdmann, M.; Erdmann, W.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Ferencei, J.; Fleischer, M.; Fleischmann, P.; Fleming, Y.H.; Flucke, G.; Flugge, G.; Fomenko, A.; Foresti, I.; Formanek, J.; Franke, G.; Frising, G.; Gabathuler, E.; Gabathuler, K.; Garvey, J.; Gassner, J.; Gayler, Joerg; Gerhards, R.; Gerlich, C.; Ghazaryan, Samvel; Goerlich, L.; Gogitidze, N.; Gorbounov, S.; Grab, C.; Grabski, V.; Grassler, H.; Greenshaw, T.; Gregori, M.; Grindhammer, Guenter; Haidt, D.; Hajduk, L.; Haller, J.; Heinzelmann, G.; Henderson, R.C.W.; Henschel, H.; Henshaw, O.; Heremans, R.; Herrera, G.; Herynek, I.; Hildebrandt, M.; Hiller, K.H.; Hladky, J.; Hoting, P.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Ibbotson, M.; Jacquet, M.; Janauschek, L.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, C.; Johnson, D.P.; Jung, H.; Kant, D.; Kapichine, M.; Karlsson, M.; Katzy, J.; Keil, F.; Keller, N.; Kennedy, J.; Kenyon, I.R.; Kiesling, Christian M.; Klein, M.; Kleinwort, C.; Kluge, T.; Knies, G.; Koblitz, B.; Kolya, S.D.; Korbel, V.; Kostka, P.; Koutouev, R.; Kropivnitskaya, A.; Kroseberg, J.; Kueckens, J.; Kuhr, T.; Landon, M.P.J.; Lange, W.; Lastovicka, T.; Laycock, P.; Lebedev, A.; Leissner, B.; Lemrani, R.; Lendermann, V.; Levonian, S.; List, B.; Lobodzinska, E.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lueders, H.; Luders, S.; Luke, D.; Lytkin, L.; Makankine, A.; Malden, N.; Malinovski, E.; Mangano, S.; Marage, P.; Marks, J.; Marshall, R.; Martyn, H.U.; Martyniak, J.; Maxfield, S.J.; Meer, D.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, J.; Michine, S.; Mikocki, S.; Milstead, D.; Moreau, F.; Morozov, A.; Morris, J.V.; Muller, K.; Murin, P.; Nagovizin, V.; Naroska, B.; Naumann, J.; Naumann, T.; Newman, Paul R.; Niebergall, F.; Niebuhr, C.; Nikitin, D.; Nowak, G.; Nozicka, M.; Olivier, B.; Olsson, J.E.; Ozerov, D.; Pascaud, C.; Patel, G.D.; Peez, M.; Perez, E.; Petrukhin, A.; Pitzl, D.; Poschl, R.; Povh, B.; Raicevic, N.; Rauschenberger, J.; Reimer, P.; Reisert, B.; Risler, C.; Rizvi, E.; Robmann, P.; Roosen, R.; Rostovtsev, A.; Rusakov, S.; Rybicki, K.; Sankey, D.P.C.; Sauvan, E.; Schatzel, S.; Scheins, J.; Schilling, F.P.; Schleper, P.; Schmidt, D.; Schmidt, S.; Schmitt, S.; Schneider, M.; Schoeffel, L.; Schoning, A.; Schroder, V.; Schultz-Coulon, H.C.; Schwanenberger, C.; Sedlak, K.; Sefkow, F.; Sheviakov, I.; Shtarkov, L.N.; Sirois, Y.; Sloan, T.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, Arnd E.; Spitzer, H.; Stamen, R.; Stella, B.; Stiewe, J.; Strauch, I.; Straumann, U.; Thompson, Graham; Thompson, P.D.; Tomasz, F.; Traynor, D.; Truoel, Peter; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Turney, J.E.; Tzamariudaki, E.; Uraev, A.; Urban, Marcel; Usik, A.; Valkar, S.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vargas Trevino, A.; Vassiliev, S.; Vazdik, Y.; Veelken, C.; Vest, A.; Vichnevski, A.; Volchinski, V.; Wacker, K.; Wagner, J.; Waugh, B.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Werner, N.; Wessels, M.; Wessling, B.; Winde, M.; Winter, G.G.; Wissing, C.; Woehrling, E.E.; Wunsch, E.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhokin, A.; Zomer, F.; zur Nedden, M.

    2003-01-01

    Multi-electron production is studied at high electron transverse momentum in positron- and electron-proton collisions using the H1 detector at HERA. The data correspond to an integrated luminosity of 115 pb-1. Di-electron and tri-electron event yields are measured. Cross sections are derived in a restricted phase space region dominated by photon-photon collisions. In general good agreement is found with the Standard Model predictions. However, for electron pair invariant masses above 100 GeV, three di-electron events and three tri-electron events are observed, compared to Standard Model expectations of 0.30 pm 0.04 and 0.23 pm 0.04, respectively.

  6. Scrap automotive electronics: A mini-review of current management practices.

    Science.gov (United States)

    Cucchiella, Federica; D'Adamo, Idiano; Rosa, Paolo; Terzi, Sergio

    2016-01-01

    End-of-life vehicles, together with waste from electric and electronic equipment, are known as an important source of secondary raw materials. For many years, their recovery has allowed the restoring of great amounts of metals for new cars production. This article provides a comprehensive mini-review on the end-of-life vehicles recycling topic between 2000 and 2014, with a particular focus on automotive electronics recycling. In fact, in the last years, experts focused their attention on a better exploitation of automotive shredder residue fraction, but not sufficiently on eventual electronic scraps embedded in it. Hence, studies assessing the value embedded in these scraps are rarely available in literature, causing an important gap in both recycling policies and research. The fact that, at present, the management of electronic control units (the most valuable component among automotive electronic equipment) is, as yet, off the radar in both end-of-life vehicles and waste from electric and electronic equipment Directives demonstrates the theory. Of course, their recycling would not contribute in a relevant way to reach the weighted-based recycling and recovery targets characterising current regulations, but would be very important under a critical raw materials recovery view. Results coming from the literature analysis confirm these assumptions. © The Author(s) 2015.

  7. Purchasing practices in SMEs

    DEFF Research Database (Denmark)

    Skjøtt-Larsen, Tage; Bagchi, Prabir K.

    2007-01-01

    The purpose of this paper is to develop a knowledge and understanding of purchasing practices of SMEs in Denmark. The paper is based on the results from a survey among 94 Danish SMEs, mainly within machinery, electronics and electrical, transportation equipment, and medical equipment industries....... The results are compared with a similar study encompassing 224 SMEs in Indiana, USA. First, the level of purchasing complexity is discussed. There are similarities between the two surveys in terms of purchasing's influence on product quality and productivity, and percentage of total costs. However, the degree...... on the results from the two surveys, we discuss the managerial and research implications for purchasing practices in SMEs....

  8. Printing versus coating - What will be the future production technology for printed electronics?

    Energy Technology Data Exchange (ETDEWEB)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

    2015-02-17

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  9. Design of a Flexible Hardware Interface for Multiple Remote Electronic practical Experiments of Virtual Laboratory

    Directory of Open Access Journals (Sweden)

    Farah Said

    2012-03-01

    Full Text Available The objective of this work is to present a new design of a Flexible Hardware Interface (FHI based on PID control techniques to use in a virtual laboratory. This flexible hardware interface allows the easy implementation of different and multiple remote electronic practical experiments for undergraduate engineering classes. This interface can be viewed as opened hardware architecture to easily develop simple or complex remote experiments in the electronic domain. The philosophy of the use of this interface can also be expanded to many other domains as optic experiments for instance. It is also demonstrated that software can be developed to enable remote measurements of electronic circuits or systems using only Web site Interface. Using standard browsers (such as Internet explorer, Firefox, Chrome or Safari, different students can have a remote access to different practical experiments at a time.

  10. Product conveying system for 10 MeV electron beam accelerator for electron beam centre, Kharghar, Navi Mumbai

    International Nuclear Information System (INIS)

    Bandi, L.N.; Lavale, D.S.; Sarma, K.S.S.; Khader, S.A.; Assadullah, M.; Sabharwal, S.

    2003-01-01

    In industrial radiation processing applications using accelerators, product conveying system plays a vital role in exposing the product to high energy electron beam for imparting specified dose to the product and delivering required through puts. The speed of the conveyor corresponds to a definite time of exposure of the product in the radiation zone. Design of suitable conveyor system for a variety of products with differing dose requirements call for a conveyor with wide speed range. This paper discusses the design features of a suitable under beam conveyor system for 10 MeV, 10 kW accelerator for processing a range of products including medical and food products

  11. Product Portfolio Management Best Practices For New Product Development: A Review Of Models

    Directory of Open Access Journals (Sweden)

    Doorasamy Mishelle

    2017-02-01

    Full Text Available The survival of any industrial organization depends on whether producing goods or services hinge on how innovative they have become in managing their product portfolio to craft new products that changes with the ever-changing tastes and needs of their customers. This study delves in to the models and theories that drive product portfolio management practices in a way that they support the successes of new product development. Our review is based on selected studies at the frontier of product management, summarized, and compared based on authors experiences, subsisting models, and theories with the results purely based on qualitative rather than quantitative approaches. The essence is to explore possible new theory or model in this field of research.

  12. Market factors and electronic medical record adoption in medical practices.

    Science.gov (United States)

    Menachemi, Nir; Mazurenko, Olena; Kazley, Abby Swanson; Diana, Mark L; Ford, Eric W

    2012-01-01

    Previous studies identified individual or practice factors that influence practice-based physicians' electronic medical record (EMR) adoption. Less is known about the market factors that influence physicians' EMR adoption. The aim of this study was to explore the relationship between environmental market characteristics and physicians' EMR adoption. The Health Tracking Physician Survey 2008 and Area Resource File (2008) were combined and analyzed. Binary logistic regression was used to examine the relationship between three dimensions of the market environment (munificence, dynamism, and complexity) and EMR adoption controlling for several physician and practice characteristics. In a nationally representative sample of 4,720 physicians, measures of market dynamism including increases in unemployment, odds ratio (OR) = 0.95, 95% confidence interval (CI) [0.91, 0.99], or poverty rates, OR = 0.93, 95% CI [0.89, 0.96], were negatively associated with EMR adoption. Health maintenance organization penetration, OR = 3.01, 95% CI [1.49, 6.05], another measure of dynamism, was positively associated with EMR adoption. Physicians practicing in areas with a malpractice crisis, OR = 0.82, 95% CI [0.71, 0.94], representing environmental complexity, had lower EMR adoption rates. Understanding how market factors relate to practice-based physicians' EMR adoption can assist policymakers to better target limited resources as they work to realize the national goal of universal EMR adoption and meaningful use.

  13. Practical Approaches to Mitigation of Specimen Charging in High-Resolution Transmission Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Young-Min Kim

    2010-09-01

    Full Text Available Specimen charging that is associated with the electron bombardment on the sample is a practical hindrance to high-resolution transmission electron microscopy (HRTEM analysis because it causes a severe loss of resolution in either diffraction or image data. Conductive thin film deposition on an insulating specimen has been proposed as an effective approach to the mitigation of the specimen charging; however, this method is generally not useful in HRTEM imaging of materials because the deposited film induces another artifact in the HRTEM image contrast. In this study, we propose practical methods to mitigate the specimen charging that takes place during the HRTEM of materials. For bulk-type specimens prepared by either an ion-thinning or focused-ion beam (FIB process, a plasma cleaning treatment is significantly effective in eliminating the charging phenomenon. In the case of low-dimensional nanomaterials such as nanowires and nanoparticles, the plasma cleaning is not feasible; however, the charging effect can be effectively eliminated by adjusting the electron illumination condition. The proposed methods facilitate a decrease in the buildup of specimen charging, thereby enhancing the quality of high-resolution images significantly.

  14. Measurements of absolute M-subshell X-ray production cross sections of Th by electron impact

    Energy Technology Data Exchange (ETDEWEB)

    Moy, A., E-mail: aurelien.moy@cea.fr [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France); Merlet, C. [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); Dugne, O. [CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France)

    2014-08-31

    Highlights: • The M X-ray production cross sections of Th were measured by electron impact. • The M-subshell ionization cross sections of Th were determined from 3 to 38 keV. • Theoretical ionization cross-sections are in agreement with our experimental results. - Abstract: Measurements of absolute M-subshell X-ray production cross sections for element Th were made by electron impact for energies ranging from the ionization threshold up to 38 keV. Experimental data were obtained by measuring the X-ray intensity emitted from ultrathin Th films deposited onto self-supporting C backing films. The measurements were conducted with an electron microprobe using high-resolution wavelength dispersive spectrometers. Recorded intensities were converted into absolute X-ray production cross sections by means of atomic data and estimation of the number of primary electrons, target thickness, and detector efficiency. Our experimental X-ray production cross sections, the first to be reported for the M subshells of Th, are compared with X-ray production cross sections calculated with the mean of ionization cross sections obtained from the distorted-wave Born approximation. The Mα X-ray production cross section calculated is in excellent agreement with the measurements, allowing future use for standardless quantification in electron probe microanalysis.

  15. Electron microscopy of hydrocarbon production in parthenium argentatum (guayule)

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Thomas E. [Univ. of California, Berkeley, CA (United States)

    1977-11-01

    The electron microscope was used to study the biological processes involved in hydrocarbon production. The little desert shrub Guayule (Parthenium argentatum) was selected for study. This shrub can produce hydrocarbons (rubber) in concentrations up to 1/4 of its dry weight. It grows on semi-arid land and has been extensively studied. The potential of Guayule is described in detail. Results of an investigation into the morphology of Guayule at the electron microscope level are given. Experiments, which would allow the biosynthesis of hydrocarbon in Guayule to be followed, were designed. In order to do this, knowledge of the biochemistry of rubber formation was used to select a tracer, mevalonic acid. Mevalonic acid is the precursor of all the terpenoids, a large class of hydrocarbons which includes rubber. It was found that when high enough concentrations of mevalonic acid are administered to seedling Guayule plants, build-ups of metabolized products are found within the chloroplasts of the seedlings. Also, tritium labeled mevalonic acid was used as a precursor, and its metabolic progress was followed by using the technique of electron microscope autoradiography. The results of these experiments also implicated chloroplasts of the Guayule plant in hydrocarbon production. The final task was the development of a system to produce three-dimensional stereo reconstructions of organelles suspected of involvement in hydrocarbon biosynthesis in Guayule. The techniques are designed to reconstruct an object from serial sections of that object. The techniques use stereo imaging both to abstract information for computer processing, and also in the computer produced reconstruction.

  16. Identification of Degradation Products of Lincomycin and Iopromide by Electron Beam Irradiation

    International Nuclear Information System (INIS)

    Cha, Yongbyoung; Ham, Hyunsun; Myung, Seungwoon

    2013-01-01

    Lincomycin and Iopromide are major species among the Pharmaceuticals and Personal Care Products (PPCPs) from four major rivers in Korea. The structure characterization of six lincomycin's and two iopromide's degradation products formed under the irradiation of electron beam was performed, and the degradation efficiency as a function of the various irradiation dose and sample concentration was investigated. Electron beam (10 MeV, 0.5 mA and 5 kW) experiments for the structural characterization of the degradation products, which is fortified with lincomycin, were performed at the dose of 10 kGy. The separation of its degradation products and lincomycin was carried by C18 column (2.1 Χ 100 mm, 3.5 μm), using gradient elution with 20 mM ammonium acetate and acetonitrile. The structures of degradation products of lincomycin and iopromide were proposed by interpretation of mass spectra and chromatograms by LC/MS/MS, and also the mass fragmentation pathways of mass spectra in tandem mass spectrometry were proposed. The experiments of the degradation efficiency as a function of the irradiation dose intensity and the initial concentration of lincomycin in aqueous environment were performed, and higher dose of electron beam and lower concentration was observed the increased degradation efficiency

  17. Digital HCAL Electronics: Status of Production

    Energy Technology Data Exchange (ETDEWEB)

    Drake, Gary; Repond, Jose, E-mail: drake@hep.anl.gov [Argonne National Laboratory (United States)

    2011-04-01

    This is a status report of the production of the readout electronics for the Digital Hadron Calorimeter (DHCAL) prototype. The prototype will be equipped with Resistive Plate Chambers (RPCs), read out with 1 x 1 cm{sup 2} pads. The readout of each channel is simplified to provide a yes or no (digital readout) within a time bin of 100 ns. Each detector layer with an area of 96 x 96 cm{sup 2} contains close to 10,000 readout channels. The total channel count for the entire prototype calorimeter with 38 active layers is approximately 350,000.

  18. WDM production with intense relativistic electrons

    Science.gov (United States)

    Coleman, Josh; Andrews, Heather; Klasky, Mark; Colgan, James; Burris-Mog, Trevor; Creveling, Dan; Miller, Craig; Welch, Dale; Berninger, Mike

    2016-10-01

    The production of warm dense matter (WDM) through collisional heating with intense relativistic electrons is underway. A 100-ns-long monochromatic bunch of electrons with energies of 19.1-19.8 MeV and currents of 0.2-1.7 kA is used to heat 100- μm-thick foils with Z measuring the equation of state with particle beams and benchmark numerical models. Measurements indicate the formation of a warm dense plasma near the end of the pulse, which is on the order of the beam size. These plasmas expand 5 mm in the first microsecond and slow down to 1018 cm-3. At these densities our plasma is collisionally dominated making it possible to spectrally model the density and temperature in LTE. Preliminary density gradient measurements will also be presented indicating the spatial extent of the solid density cutoff. This work was supported by the National Nuclear Se- curity Administration of the U.S. Department of Energy under Contract No. DE-AC52-06NA25396.

  19. Electronic cigarettes: product characterisation and design considerations.

    Science.gov (United States)

    Brown, Christopher J; Cheng, James M

    2014-05-01

    To review the available evidence regarding electronic cigarette (e-cigarette) product characterisation and design features in order to understand their potential impact on individual users and on public health. Systematic literature searches in 10 reference databases were conducted through October 2013. A total of 14 articles and documents and 16 patents were included in this analysis. Numerous disposable and reusable e-cigarette product options exist, representing wide variation in product configuration and component functionality. Common e-cigarette components include an aerosol generator, a flow sensor, a battery and a nicotine-containing solution storage area. e-cigarettes currently include many interchangeable parts, enabling users to modify the character of the delivered aerosol and, therefore, the product's 'effectiveness' as a nicotine delivery product. Materials in e-cigarettes may include metals, rubber and ceramics. Some materials may be aerosolised and have adverse health effects. Several studies have described significant performance variability across and within e-cigarette brands. Patent applications include novel product features designed to influence aerosol properties and e-cigarette efficiency at delivering nicotine. Although e-cigarettes share a basic design, engineering variations and user modifications result in differences in nicotine delivery and potential product risks. e-cigarette aerosols may include harmful and potentially harmful constituents. Battery explosions and the risks of exposure to the e-liquid (especially for children) are also concerns. Additional research will enhance the current understanding of basic e-cigarette design and operation, aerosol production and processing, and functionality. A standardised e-cigarette testing regime should be developed to allow product comparisons.

  20. Electron-positron pair production by two identical photons in the nuclear field

    International Nuclear Information System (INIS)

    Smirnov, A.I.

    1977-01-01

    In the Born approximation of the perturbation theory considered is a nonlinear effect of the electron-positron pair production by two identical photons in the Coulomb field of an atomic nucleus. The kinematic version of identical photons is studied. All the particles are considered to be nonpolarized. The calculation of the differential probability of the effect has been carried out earlier by the Feynman method. The total probability of the effect in limiting energy ranges is determined by integrating the formulas of the pair component distribution over energies. The probabilities of the electron-positron pair production and fusion of two photons into one in the nucleus field have been compared for the case of identical quanta. From the comparison of the results of analyzing both the nonlinear effects it follows that in the high-energy range the electron-positron pair production by two identical photons in the nucleus field extremely predominates over the fusion of two photons into one photon in the same field

  1. Photo-production of (99)Mo/(99m)Tc with electron linear accelerator beam.

    Science.gov (United States)

    Avagyan, R; Avetisyan, A; Kerobyan, I; Dallakyan, R

    2014-09-01

    We report on the development of a relatively new method for the production of (99)Mo/(99m)Tc. The method involves the irradiation of natural molybdenum using high-intensity bremsstrahlung photons from the electron beam of the LUE50 linear electron accelerator located at the Yerevan Physics Institute (YerPhi). The production method has been developed and shown to be successful. The linear electron accelerator at YerPhi was upgraded to allow for significant increases of the beam intensity and spatial density. The LUE50 was also instrumented by a remote control system for ease of operation. We have developed and tested the (99m)Tc extraction from the irradiation of natural MoO3. This paper reports on the optimal conditions of our method of (99)Mo production. We show the success of this method with the production and separation of the first usable amounts of (99m)Tc. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Hydrogen production by using Rhodobacter capsulatus mutants with genetically modified electron transfer chains

    Energy Technology Data Exchange (ETDEWEB)

    OEztuerk, Yavuz; Yuecel, Meral; Guenduez, Ufuk [Department of Biology, Middle East Technical University, Ankara (Turkey); Daldal, Fevzi [Department of Biology, Plant Science Institute, University of Pennsylvania, Philadelphia, PA 19104-6018 (United States); Mandaci, Sevnur [TUEBITAK Research Institute for Genetic Engineering and Biotechnology, Gebze Kocaeli 41470 (Turkey); Tuerker, Lemi [Department of Chemistry, Middle East Technical University, Ankara (Turkey); Eroglu, Inci [Department of Chemical Engineering, Middle East Technical University, Ankara (Turkey)

    2006-09-15

    In Rhodobacter capsulatus excess reducing equivalents generated by organic acid oxidation is consumed to reduce protons into hydrogen by the activity of nitrogenase. Nitrogenase serves as a redox-balancing tool and is activated by the RegB/RegA global regulatory system during photosynthetic growth. The terminal cytochrome cbb{sub 3} oxidase and the redox state of the cyclic photosynthetic electron transfer chain serve redox signaling to the RegB/RegA regulatory systems in Rhodobacter. In this study, hydrogen production of various R. capsulatus strains harboring the genetically modified electron carrier cytochromes or lacking the cyt cbb{sub 3} oxidase or the quinol oxidase were compared with the wild type. The results indicated that hydrogen production of mutant strains with modified electron carrier cytochromes decreased 3- to 4-fold, but the rate of hydrogen production increased significantly in a cbb{sub 3}{sup -} mutant. Moreover, hydrogen production efficiency of various R. capsulatus strains further increased by inactivation of uptake hydrogenase genes. (author)

  3. Debunking the Myth of the Nintendo Generation: How Doctoral Students Introduce New Electronic Communication Practices into University Research.

    Science.gov (United States)

    Covi, Lisa M.

    2000-01-01

    Provides empirical evidence of how doctoral students and their faculty advisors use electronic communication technologies. Examines work patterns of doctoral students and data on recent introduction of new electronic communication practices, offering an alternative explanation to the Nintendo Generation Myth that claims electronic communication…

  4. Implementation of a next-generation electronic nursing records system based on detailed clinical models and integration of clinical practice guidelines.

    Science.gov (United States)

    Min, Yul Ha; Park, Hyeoun-Ae; Chung, Eunja; Lee, Hyunsook

    2013-12-01

    The purpose of this paper is to describe the components of a next-generation electronic nursing records system ensuring full semantic interoperability and integrating evidence into the nursing records system. A next-generation electronic nursing records system based on detailed clinical models and clinical practice guidelines was developed at Seoul National University Bundang Hospital in 2013. This system has two components, a terminology server and a nursing documentation system. The terminology server manages nursing narratives generated from entity-attribute-value triplets of detailed clinical models using a natural language generation system. The nursing documentation system provides nurses with a set of nursing narratives arranged around the recommendations extracted from clinical practice guidelines. An electronic nursing records system based on detailed clinical models and clinical practice guidelines was successfully implemented in a hospital in Korea. The next-generation electronic nursing records system can support nursing practice and nursing documentation, which in turn will improve data quality.

  5. A descriptive study of chiropractors' opinions and practices regarding office-based health product sales

    Directory of Open Access Journals (Sweden)

    Page Stacey A

    2012-04-01

    Full Text Available Abstract Background Although the sale of non-prescription health products is ubiquitous, the views of health professionals, such as chiropractors, regarding the sale of such products are not well known. Practitioner opinion is important to understand and inform professional practice. The purpose of this study was to describe chiropractors' perspectives and practices on the sale of health care products from practitioners' offices. Methods Chiropractors were invited to provide written comments about health product sales at the end of a fixed choice, mailed survey. Respondents' comments were analyzed using qualitative description. Ethics approval was received from the Conjoint Health Research Ethics Board at the University of Calgary. Results One hundred seven of the 265 respondents (response rate of 51% provided written comments. Approximately 30 pages of double-spaced, typed text were gathered. Respondents did not consistently endorse or condemn health product sales, and engaged in the practice to greater and lesser extents. While some were opposed to health products sales, some accepted the practice with a degree of ambivalence whereas others clearly embraced it. Some respondents acknowledged a professional conflict of interest in such sales and marketing, and described strategies used to mitigate it. Others provided a range of justifications for the practice. Personal integrity and professional standards were discussed and a need for monitoring identified. Conclusions A wide range of opinions and practices were described and this is consistent with resulting variation in practice. In light of this, standards that facilitate consistency in practice may benefit professionals and the public alike.

  6. 27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

    Science.gov (United States)

    2010-04-01

    ... components and controls for acceptable electronic signatures? 73.11 Section 73.11 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Signatures § 73.11...

  7. Flexibility practices, wages and productivity : evidence from Norway

    NARCIS (Netherlands)

    van der Meer, P.H.; Ringdal, K.

    2009-01-01

    Purpose - The purpose of this paper is to test whether the use of numerical and functional flexibility practices in firms affect their performance. Design/methodology/approach - A combined employer/employee Norwegian data set is used to estimate production function like equations. The data stem from

  8. Learning Organic Chemistry Through Natural Products A Practical ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 9. Learning Organic Chemistry Through Natural Products A Practical Approach. N R Krishnaswamy. Series Article Volume 1 Issue 9 September 1996 pp 25-33. Fulltext. Click here to view fulltext PDF. Permanent link:

  9. Electron beam-cured coating

    International Nuclear Information System (INIS)

    Kishi, Naoyuki

    1976-01-01

    The method for hardening coatings by the irradiation with electron beams is reviewed. The report is divided into seven parts, namely 1) general description and characteristics of electron beam-cured coating, 2) radiation sources of curing, 3) hardening conditions and reaction behaviour, 4) uses and advantages, 5) latest trends of the industry, 6) practice in the field of construction materials, and 7) economy. The primary characteristics of the electron beam hardening is that graft reaction takes place between base resin and coating to produce strong adhesive coating without any pretreatment. A variety of base resins are developed. High class esters of acrylic acid monomers and methacrylic acid monomers are mainly used as dilutants recently. At present, scanning type accelerators are used, but the practical application of the system producing electron beam of curtain type is expected. The dose rate dependence, the repetitive irradiation and the irradiation atmosphere are briefly described. The filed patent applications on the electron beam hardening were analyzed by the officer of Japan Patent Agency. The production lines for coatings by the electron beam hardening in the world are listed. In the electron beam-cured coating, fifty percent of given energy is consumed effectively for the electron beam hardening, and the solvents discharged from ovens and polluting atmosphere are not used, because the paints of high solid type is used. The running costs of the electron beam process are one sixth of the thermal oven process. (Iwakiri, K.)

  10. Psychiatrists' Comfort Using Computers and Other Electronic Devices in Clinical Practice.

    Science.gov (United States)

    Duffy, Farifteh F; Fochtmann, Laura J; Clarke, Diana E; Barber, Keila; Hong, Seung-Hee; Yager, Joel; Mościcki, Eve K; Plovnick, Robert M

    2016-09-01

    This report highlights findings from the Study of Psychiatrists' Use of Informational Resources in Clinical Practice, a cross-sectional Web- and paper-based survey that examined psychiatrists' comfort using computers and other electronic devices in clinical practice. One-thousand psychiatrists were randomly selected from the American Medical Association Physician Masterfile and asked to complete the survey between May and August, 2012. A total of 152 eligible psychiatrists completed the questionnaire (response rate 22.2 %). The majority of psychiatrists reported comfort using computers for educational and personal purposes. However, 26 % of psychiatrists reported not using or not being comfortable using computers for clinical functions. Psychiatrists under age 50 were more likely to report comfort using computers for all purposes than their older counterparts. Clinical tasks for which computers were reportedly used comfortably, specifically by psychiatrists younger than 50, included documenting clinical encounters, prescribing, ordering laboratory tests, accessing read-only patient information (e.g., test results), conducting internet searches for general clinical information, accessing online patient educational materials, and communicating with patients or other clinicians. Psychiatrists generally reported comfort using computers for personal and educational purposes. However, use of computers in clinical care was less common, particularly among psychiatrists 50 and older. Information and educational resources need to be available in a variety of accessible, user-friendly, computer and non-computer-based formats, to support use across all ages. Moreover, ongoing training and technical assistance with use of electronic and mobile device technologies in clinical practice is needed. Research on barriers to clinical use of computers is warranted.

  11. Psychiatrists’ Comfort Using Computers and Other Electronic Devices in Clinical Practice

    Science.gov (United States)

    Fochtmann, Laura J.; Clarke, Diana E.; Barber, Keila; Hong, Seung-Hee; Yager, Joel; Mościcki, Eve K.; Plovnick, Robert M.

    2015-01-01

    This report highlights findings from the Study of Psychiatrists’ Use of Informational Resources in Clinical Practice, a cross-sectional Web- and paper-based survey that examined psychiatrists’ comfort using computers and other electronic devices in clinical practice. One-thousand psychiatrists were randomly selected from the American Medical Association Physician Masterfile and asked to complete the survey between May and August, 2012. A total of 152 eligible psychiatrists completed the questionnaire (response rate 22.2 %). The majority of psychiatrists reported comfort using computers for educational and personal purposes. However, 26 % of psychiatrists reported not using or not being comfortable using computers for clinical functions. Psychiatrists under age 50 were more likely to report comfort using computers for all purposes than their older counterparts. Clinical tasks for which computers were reportedly used comfortably, specifically by psychiatrists younger than 50, included documenting clinical encounters, prescribing, ordering laboratory tests, accessing read-only patient information (e.g., test results), conducting internet searches for general clinical information, accessing online patient educational materials, and communicating with patients or other clinicians. Psychiatrists generally reported comfort using computers for personal and educational purposes. However, use of computers in clinical care was less common, particularly among psychiatrists 50 and older. Information and educational resources need to be available in a variety of accessible, user-friendly, computer and non-computer-based formats, to support use across all ages. Moreover, ongoing training and technical assistance with use of electronic and mobile device technologies in clinical practice is needed. Research on barriers to clinical use of computers is warranted. PMID:26667248

  12. Excited-atom production by electron and ion bombardment of alkali halides

    International Nuclear Information System (INIS)

    Walkup, R.E.; Avouris, P.; Ghosh, A.P.

    1987-01-01

    We present experimental results on the production of excited atoms by electron and ion bombardment of alkali halides. For the case of electron bombardment, Doppler shift measurements show that the electronically excited atoms have a thermal velocity distribution in equilibrium with the surface temperature. Measurements of the absolute yield of excited atoms, the distribution of population among the excited states, and the systematic dependence on incident electron current and sample temperature support a model in which the excited atoms are produced by gas-phase collisions between desorbed ground-state atoms and secondary electrons. In contrast, for the case of ion bombardment, the excited atoms are directly sputtered from the surface, with velocity distributions characteristic of a collision cascade, and with typical energies of --10 eV

  13. Electron-positron pair production in inhomogeneous electromagnetic fields

    International Nuclear Information System (INIS)

    Kohlfürst, C.

    2015-01-01

    The process of electron-positron pair production is investigated within the phase-space Wigner formalism. The similarities between atomic ionization and pair production for homogeneous, but time-dependent linearly polarized electric fields are examined mainly in the regime of multiphoton absorption (field-dependent threshold, above-threshold pair production). Characteristic signatures in the particle spectra are identified (effective mass, channel closing). The non-monotonic dependence of the particle yield on the carrier frequency is discussed as well. The investigations are then extended to spatially inhomogeneous electric fields. New effects arising due to the spatial dependence of the effective mass are discussed in terms of a semi-classical interpretation. An increase in the normalized particle yield is found for various field configurations.Pair production in inhomogeneous electric and magnetic fields is also studied. The influence of a time-dependent spatially inhomogeneous magnetic field on the momentum spectrum and the particle yield is investigated. The Lorentz invariants are identified to be crucial in order to understand pair production by strong electric fields in the presence of strong magnetic fields. (author) [de

  14. Herd health and production management in dairy practice.

    NARCIS (Netherlands)

    Brand, A.; Noordhuizen, J.P.T.M.; Schukken, Y.H.

    1996-01-01

    This text aims to teach students, practitioners and farm advisors how to give management support to the dairy farmer in order to optimize the health, productivity and welfare of his herd. The book covers management practices and farm conditions which have both positive and negative influences on

  15. Extended use of electronic health records by primary care physicians: Does the electronic health record artefact matter?

    Science.gov (United States)

    Raymond, Louis; Paré, Guy; Marchand, Marie

    2017-04-01

    The deployment of electronic health record systems is deemed to play a decisive role in the transformations currently being implemented in primary care medical practices. This study aims to characterize electronic health record systems from the perspective of family physicians. To achieve this goal, we conducted a survey of physicians practising in private clinics located in Quebec, Canada. We used valid responses from 331 respondents who were found to be representative of the larger population. Data provided by the physicians using the top three electronic health record software products were analysed in order to obtain statistically adequate sub-sample sizes. Significant differences were observed among the three products with regard to their functional capability. The extent to which each of the electronic health record functionalities are used by physicians also varied significantly. Our results confirm that the electronic health record artefact 'does matter', its clinical functionalities explaining why certain physicians make more extended use of their system than others.

  16. Application of electron-chemical curing in the production of thin composite materials

    International Nuclear Information System (INIS)

    Kopetchenov, V.; Shik, V.; Konev, V.; Kurapov, A.; Misin, I.; Gavrilov, V.; Malik, V.

    1993-01-01

    Thousands of tons of various thin composite materials in rolls for electrotechnical and domestic application including a whole range of electrical insulating materials, such as varnished and polymer fabrics, glass-micatapes, prepregs, thin laminated plastics and clad laminates, materials for decorative and domestic purposes - pressure sensitive adhesive tape and laminates, covering and finishing compositions based on fabrics, films and papers are produced. An important advantage of the electron-chemical processing in the production of composite materials is an essential energy saving (reduction of energy consumption 3-5 times). Absence of the organic diluents in binders decreases fire and explosion hazards of the production and sufficiently decreases danger for the environment of the technology used. Research and Production Company ''Polyrad'' is engaged in the development of technologies and equipment for the production of thin composite materials by the Electron-Chemical Method. (author)

  17. Guide for preparing annual reports on radiation-safety testing of electronic products (general)

    International Nuclear Information System (INIS)

    1987-10-01

    For manufacturers of electronic products other than those for which a specific guide has been issued, the guide replaces the Guide for the Filing of Annual Reports (21 CFR Subchapter J, Section 1002.11), HHS Publication FDA 82-8127. The electronic product (general) annual reporting guide is applicable to the following products: products intended to produce x radiation (accelerators, analytical devices, therapy x-ray machines); microwave diathermy machines; cold-cathode discharge tubes; and vacuum switches and tubes operating at or above 15,000 volts. To carry out its responsibilities under Public Law 90-602, the Food and Drug Administration's Center for Devices and Radiological Health (CDRH) has issued a series of regulations contained in Title 21 of the Code of Federal Regulations (CFR). Part 1002 of 21 CFR deals with records and reports. Section 1002.61 categorizes electronic products into Groups A through C. Section 1002.30 requires manufacturers of products in Groups B and C to establish and maintain certain records, while Section 1002.11 requires such manufacturers to submit an Annual Report summarizing the contents of the required records. Section 1002.7 requires that reports conform to reporting guides issued by CDRH unless an acceptable justification for an alternate format is provided

  18. 77 FR 31876 - Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not...

    Science.gov (United States)

    2012-05-30

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-836] Certain Consumer Electronics and Display Devices and Products Containing Same Determination Not To Review Initial Determination To Amend... electronics and display devices and products containing the same by reason of infringement of U.S. Patent Nos...

  19. Anticipating Soft Problems with Consumer Electronic Products : How do soft problems interact with user characteristics and product properties?

    NARCIS (Netherlands)

    Kim, C.

    2012-01-01

    Over the last decade consumer electronic product industries have been confronted with an increase in consumer complaints. Interestingly about half of the reasons for product return are based on so called ‘soft problems’, consumer complaints that cannot be traced back to technical problems. Probably

  20. Electron-positron pair production in Coulomb collisions at ultrarelativistic energies

    International Nuclear Information System (INIS)

    Vane, C.R.; Datz, S.; Dittner, P.F.; Krause, H.F.; Bottcher, C.; Strayer, M.; Schuch, R.; Gao, H.; Hutton, R.

    1993-01-01

    We have measured angular and momentum distributions for electrons and positrons created as pairs in peripheral collisions of 6.4 TeV bare sulfur ions with fixed targets of Al, Pd, and Au. Singly- and doubly-differential cross sections have been determined for 1--17 MeV/c electrons and positrons detected independently and in coincidence as pairs. Integrated yields for pair production are found to vary as the square of the target nuclear charge. Relative angular and momentum differential cross sections are effectively target independent. Probability distributions for the pair total momentum, the positron fraction of the pair momentum, and the pair traverse momentum have been derived from the coincident electron-positron data

  1. Measurements of Pair Production and Electron Capture from the Continuum in Heavy Particle Collisions

    CERN Multimedia

    2002-01-01

    Large transient Coulomb fields, which are generated in collisions of high-Z systems at sufficiently high energies, lead to copious production of electron-positron pairs. It has been suggested that these lepton pairs might mask signals arising from plasma phase interaction. Pair-production cross sections have been calculated by several authors with results which differ significantly from each other. Some of the electrons produced may be captured into bound states of the ion, thereby, reducing its charge state by one unit. This process which has been termed ``Electron Capture from Pair Production``, represents the only electron capture pro which increases with energy, and as such, will dominate all others in the ultrarelativistic energy regime. Ions having undergone this process would be lost from storage-type accelerators. The absolute cross sections for capture have been calculated with results which differ by as much as an order of magnitude. If as large as some of the calculations predict, Relativistic Heav...

  2. Measurements of Pair Production and Electron Capture from the Continuum in Heavy Particle Collisions

    CERN Multimedia

    2002-01-01

    % WA99 \\\\ \\\\ Large transient Coulomb fields, which are generated in collisions of high-Z systems at sufficiently high energies, lead to copious production of electron-positron pairs. It has been suggested that these lepton pairs might mask signals arising from plasma phase interaction. Pair-production cross-sections have been calculated by several authors with results that differ significantly from each other. For very heavy ions and high energies, multiple pairs are expected to be formed even in single peripheral collisions. Perturbative and nonperturbative treatments lead to various predictions for the fractions of multiple pair formation out of the total cross-sections. Some of the electrons produced will be captured into bound states of the ion, thereby, reducing its charge state by one unit. This process which has been termed $^{\\prime\\prime}$Electron Capture from Pair Production$^{\\prime\\prime}$, represents the only electron capture process which increases with energy, and as such, will dominate all oth...

  3. A New View at the Planning Marketing Popular Products: Exploratory Study Electronics Sector with Companies in Brazil.

    Directory of Open Access Journals (Sweden)

    Evange Elias Assis

    2015-06-01

    Full Text Available The increased consumption of appliance and electronic products by lower-income population represented a growth opportunity for companies in the sector. The overall objective of this paper is to investigate how appliance and electronic product manufacturers draw up their marketing planning for low-end products. An exploratory approach was taken in this study, comprising the literature review and the empirical research which was conducted in two stages by combining the qualitative and quantitative approaches. The study group comprised companies affiliated with National Association of Appliance and Electronic Product Manufacturers (ELETROS. Results indicate that in 87.5% of cases the marketing planning focuses on the product. The companies are concerned to differentiate the low-end products on the market mainly by design (87.5% and innovation (62.5%. Within this context, it seems that the opportunity for growth of the appliance and electronic product companies can be boosted when implementing specific marketing planning for low-end products. Innovation is needed in all processes from project design of the product to its distribution. 

  4. Application of electron-chemical curing in the production of thin composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Kopetchenov, V.; Shik, V.; Konev, V.; Kurapov, A.; Misin, I.; Gavrilov, V.; Malik, V. (Polyrad Research and Production Co., Moscow (Russian Federation))

    Thousands of tons of various thin composite materials in rolls for electrotechnical and domestic application including a whole range of electrical insulating materials, such as varnished and polymer fabrics, glass-micatapes, prepregs, thin laminated plastics and clad laminates, materials for decorative and domestic purposes - pressure sensitive adhesive tape and laminates, covering and finishing compositions based on fabrics, films and papers are produced. An important advantage of the electron-chemical processing in the production of composite materials is an essential energy saving (reduction of energy consumption 3-5 times). Absence of the organic diluents in binders decreases fire and explosion hazards of the production and sufficiently decreases danger for the environment of the technology used. Research and Production Company ''Polyrad'' is engaged in the development of technologies and equipment for the production of thin composite materials by the Electron-Chemical Method. (author).

  5. Factors affecting the adoption of supply chain management practices: Evidence from the Brazilian electro-electronic sector

    Directory of Open Access Journals (Sweden)

    Ana Beatriz Lopes de Sousa Jabbour

    2011-12-01

    Full Text Available This study on the factors affecting the adoption of supply chain management (SCM practices develops four hypotheses based on a literature review, and tests them using survey data of Brazilian electro-electronic firms. The results reveal the big picture of the SCM practices in the sector and suggest that contextual factors such as size, position and bargaining power affect the adoption of SCM practices, which are also more customer oriented. Sector characteristics are very important in analysing SCM practices. Contrary to the findings of literature, the relationship between competitive priorities and SCM practices was not supported statistically.

  6. A Practical and Portable Solids-State Electronic Terahertz Imaging System

    Directory of Open Access Journals (Sweden)

    Ken Smart

    2016-04-01

    Full Text Available A practical compact solid-state terahertz imaging system is presented. Various beam guiding architectures were explored and hardware performance assessed to improve its compactness, robustness, multi-functionality and simplicity of operation. The system performance in terms of image resolution, signal-to-noise ratio, the electronic signal modulation versus optical chopper, is evaluated and discussed. The system can be conveniently switched between transmission and reflection mode according to the application. A range of imaging application scenarios was explored and images of high visual quality were obtained in both transmission and reflection mode.

  7. Eco-innovative Practices for Sustainable Consumption and Production: What are the Possible Benefits for Companies?

    Directory of Open Access Journals (Sweden)

    Maria Rosa De Giacomo

    2014-07-01

    Full Text Available The paper aims to present some eco-innovative practices regarding Sustainable Consumption and Production (SCP. The study also focuses on potential benefits for the actors who implement these practices, mainly with reference to companies. After a literature review on the actual importance of SCP and on the effects of eco-innovation tools and policies on companies, authors present the developed eco-innovation practices in three focus areas related to sustainable consumption and production. The aim of the study is to contribute to literature studies on SCP with the development of eco-innovative practices resulting by the integration of existing tools, by pointing out and valorizing their potentials and synergies. These practices have been pointing out in the framework of the international European project. Three focus areas are involved by the practices: sustainability of products and services, sustainability of production processes and sustainable management of industrial areas. Authors developed four eco innovative practices resulting from the integration of 15 existing tools. These practices offer many opportunities to many actors, mainly companies and public authorities, in order to achieve environmental and competitive benefits and implement eco-innovation principles with a cooperative and shared approach.

  8. Consumer Innovativeness Model of Indonesian Young People in Adopting Electronic Products

    Directory of Open Access Journals (Sweden)

    Reza Ashari Nasution

    2012-06-01

    Full Text Available It is important for marketers to understand how innovators respond to the introduction of new products. This paper investigates consumer innovativeness (CI from meta-analysis study as suggested by Nasution and Garnida [2011] and examines the simultaneous impacts of CI on new product adoption. Nasution and Garnida [2010] proposed three different perspectives in conceptualizing the CI model. First, the generalist stream that represents a generalized personality trait that engenders consumers to adopt new product. Second, the particularist stream that focuses on product adoption behavior within a specific domain of interest. Third, the integrator perspective that proposes to integrate these two streams by putting domain-specific innovativeness as a mediating factor in relationship between general innovativeness trait and new product adoption.A structural equation model is used to test hypotheses using empirical data from 607 respondents in electronic products adoption. The result shows that the integrator perspective provides the best model in representing the empirical data. The finding of the integrator perspective reveals that domain specific CI mediates the relationship between general innovativeness trait and new product adoption. Specifically, subjective knowledge and hedonic idea shopping enhances the actuality of new products.The findings provide an explanation to the less than consistent relationship between consumer innovativeness and new product adoption. However, a single research context of electronic products and student sample may become one of the limitations and future studies needed to replicate the perspective of CI in different research contexts for greater generalizability and the use of non-student sample. The findings have implications for the innovation adoption theory, for managers involved in the introduction of new products, and for future research on innovation adoption.

  9. Industrial applications of electron accelerators

    CERN Document Server

    Cleland, M R

    2006-01-01

    This paper addresses the industrial applications of electron accelerators for modifying the physical, chemical or biological properties of materials and commercial products by treatment with ionizing radiation. Many beneficial effects can be obtained with these methods, which are known as radiation processing. The earliest practical applications occurred during the 1950s, and the business of radiation processing has been expanding since that time. The most prevalent applications are the modification of many different plastic and rubber products and the sterilization of single-use medical devices. Emerging applications are the pasteurization and preservation of foods and the treatment of toxic industrial wastes. Industrial accelerators can now provide electron energies greater than 10 MeV and average beam powers as high as 700 kW. The availability of high-energy, high-power electron beams is stimulating interest in the use of X-rays (bremsstrahlung) as an alternative to gamma rays from radioactive nuclides.

  10. Defect production and annihilation in metals through electronic excitation by energetic heavy ion bombardment

    Energy Technology Data Exchange (ETDEWEB)

    Iwase, Akihiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-03-01

    Defect production, radiation annealing and defect recovery are studied in Ni and Cu irradiated with low-energy ({approx}1-MeV) and high-energy ({approx}100-MeV) ions. Irradiation of Ni with {approx}100-MeV ions causes an anomalous reduction, or even a complete disappearance of the stage-I recovery. This result shows that the energy transferred from excited electrons to lattice atoms through the electron-lattice interaction contributes to the annihilation of the stage-I interstitials. This effect is also observed in Ni as a large radiation annealing during 100-MeV heavy ion irradiation. On the other hand, in Cu thin foils, we find the defect production process strongly associated with electron excitation, where the defect production cross section is nearly proportional to S{sub e}{sup 2}. (author)

  11. ANALYSIS OF DOMESTIC AND INTERNATIONAL APPROACHES TO THE ADVANCED EDUCATIONAL PRACTICES IN THE ELECTRONIC NETWORK ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Tatiana N. Noskova

    2016-12-01

    Full Text Available Introduction: human activities related to the use of information are being transformed under the influence of computer technology. Variable solutions to information problems are emerging; demands and require¬ments for the competence are changing on the labour market. Educational practices are destined to form a new learning behaviour for the 21st century, adopting lifelong learning strategy. The main purpose of the article is to answer the question as to how to transform existing pedagogical theory and practice under current conditions of electronic environment. Publishing of this article is coherent with concept of the journal Integration of Education, analyzing Russian and world experience in the development of education systems. This approach is important for dissemination and implementation in practice. This article explores the challenges of information technology and technical support of the educational process in universities and schools. The study of these issues is in the field of view of the journa l. Materials and Methods: the paper elaborates on the results of domestic and international educational theory and practice, comparison methods, drawing on student’s survey in the framework of international research in the field of e-learning in higher education institutions. Results: the main approaches, applied to the formulation of educational practices in the electronic environ-ment, were analyzed. The most topical national approaches include system, activity, polysubject (dialogical, context, and dialogical ones. Among international approaches self-directed learning, educational communication strategies, experiential learning, training in partnership, collaborative learning, learning in online communities, situational training were analyzed. Specifics of electronic educational interactions with distributed in time and space activities of teachers and students, create the preconditions for the implementation of new educational

  12. LEAN PRACTICES FOR PRODUCT DEVELOPMENT PROCESS

    Directory of Open Access Journals (Sweden)

    Guilherme Luz Tortorella

    2015-06-01

    Full Text Available Lean product development (LPD is an approach that comprises lean principles and management practices that aim to reduce waste and improve operational effectiveness throughout the entire value stream in continuous improvement endless journey. Due to that, the ability to innovate, change and learn continuously is a key element in order to minimize product development problems. Several LPD techniques are presented in the literature as possible enablers for lean implementation. However, little has been known about the impact of these enablers on the problems related to product development processes. Thus, this paper aims to examine the relationship between five LPD practices’ constructs and the occurrence frequency of eleven LPD problems’ constructs in companies that are implementing lean. Moreover, the identification of relevant relationships between LPD practices’ and problems’ constructs may contribute to specify the contexts in which problems are expected to occur. The study sample comprises sixty four companies already undergoing lean implementation both in shop floor and offices area. The results indicate that the same practices’ constructs, which are deemed as influential for minimizing LPD problems, present different relationship intensities among them.

  13. Product Life Cycle: Moving from Theory to Practice

    Directory of Open Access Journals (Sweden)

    Stanley Buchin

    2015-02-01

    Full Text Available Restaurant, bar, and hospitality trends are rapidly changing, and businesses must be more proactive than ever before to continuously stimulate business and prepare for a products natural life cycle. This article will explore a model of predicting PLC and strategic practices that can extend the mature phase of a restaurant or bar.

  14. Application of electron beam curing technology for paper products

    International Nuclear Information System (INIS)

    Takaharu Miura

    1999-01-01

    The electron beam (EB) curing technology has rapidly advanced in recent years. However there were few examples applying this technology to paper products. One reason comes from the high price of EB equipment and the other comes from the difficulty of controlling the irradiation which gives damages to paper. In spite of these problems, the EB cured coating layer shows remarkable features, such as solvent-resistance, water-resistance, heat-resistance and high smoothness using the drum casting technique. Concentrating on application of this technology to paper, we have already developed some products. For example, paper for printings (Super Mirror PN) and for white boards (Super Mirror WB) have been manufactured. In this presentation, we are going to introduce this EB curing technique and the products

  15. Product development practice in medium-sized food processing companies

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    Market orientation has in numerous empirical NPD-studies been identified as critical for success. However, this study reveals a severe gap between the normative implications regarding market orientation and current product development practice in number of Danish food-processing companies. Through...

  16. Specificity of Good Manufacturing Practice (GMP) for Biomedical Cell Products.

    Science.gov (United States)

    Tulina, M A; Pyatigorskaya, N V

    2018-03-01

    The article describes special aspects of Good Manufacturing Practice (GMP) for biomedical cell products (BMCP) that imply high standards of aseptics throughout the entire productio process, strict requirements to donors and to the procedure of biomaterial isolation, guaranty of tracing BMCP products, defining processing procedures which allow to identify BMCP as minimally manipulated; continuous quality control and automation of the control process at all stages of manufacturing, which will ensure product release simultaneously with completion of technological operations.

  17. Electronic Cigarette and Electronic Hookah: A Pilot Study Comparing Two Vaping Products

    Directory of Open Access Journals (Sweden)

    Shanta R. Dube

    2015-01-01

    Full Text Available Since the introduction of e-cigarettes into the U.S. market, the number and variety of vaping products have proliferated. E-hookahs are long, pen-like vaping devices that debuted in U.S. markets in 2014. By applying the Host, Agent, Vector, Environment (HAVE model, the objective of this exploratory study was to assess differences between e-cigarettes and e-hookahs to help inform tobacco regulatory science and practice. In June–August 2014, a total of 54 unique manufactured e-cigarette and e-hookah products were identified at point of sales (POS around three college campuses in Southeast U.S. Documented characteristics included brand name, disposable, rechargeable, nicotine containing, packaging, and flavor type. Descriptive analyses were conducted October to November 2014 to assess frequency and percent of product type across POS and specific characteristics. Among 54 products, 70.4% was e-cigarettes and 29.6% was e-hookahs. Across POS, drug stores and grocery stores carried e-cigarettes exclusively, while gas stations carried the greatest proportion of e-hookahs. Compared to e-hookahs, a greater proportion of e-cigarettes were non-disposable and contained nicotine; a greater proportion of e-hookahs came in fruit and other types of flavors compared to e-cigarettes. The present study suggests that e-cigarettes and e-hookahs differ by specific product characteristics and by places where they are sold. Despite these differences, the products are used for similar purposes warranting careful monitoring of industry manufacturing and marketing, because the safety of both products is still undetermined. Additional research is needed to understand the uptake and continued use of these products.

  18. Electronic Cigarette and Electronic Hookah: A Pilot Study Comparing Two Vaping Products.

    Science.gov (United States)

    Dube, Shanta R; Pathak, Sarita; Nyman, Amy L; Eriksen, Michael P

    Since the introduction of e-cigarettes into the U.S. market, the number and variety of vaping products has proliferated. E-hookahs are long, pen-like vaping devices that debuted in U.S. markets in 2014. By applying the Host, Agent, Vector, Environment (HAVE) Model, the objective of this exploratory study was to assess differences between e-cigarettes and e-hookahs to help inform tobacco regulatory science and practice. In June-August 2014, a total of 54 unique manufactured e-cigarette and e-hookah products were identified at point of sales (POS) around three college campuses in Southeast U.S. Documented characteristics included brand name, disposable, rechargeable, nicotine containing, packaging, and flavor type. Statistical analyses were conducted October to November 2014 to assess frequency and percent of product type across POS and specific characteristics. Among 54 products, 70.4% were e-cigarettes and 29.6% were e-hookahs. Across POS, drug stores and grocery stores carried e-cigarettes exclusively, while gas stations carried the greatest proportion of e-hookahs. Compared to e-hookahs, a greater proportion of e-cigarettes were non-disposable and contained nicotine; a greater proportion of e-hookahs came in fruit and other types of flavors compared to e-cigarettes. The present study suggests that e-cigarettes and e-hookahs differ by specific product characteristics and by places where they are sold. Despite these differences, the products are used for similar purposes warranting careful monitoring of industry manufacturing and marketing, because the safety of both products is still undetermined. Additional research is needed to understand the uptake and continued use of these products.

  19. Waste reuse and disposal practices in milk production in Paraná

    Directory of Open Access Journals (Sweden)

    Ferenc Istvan Bánkuti

    2012-12-01

    Full Text Available Brazil is among the six largest producers of milk cow in the world. In 2010, Brazilian milk production reached 30.7 billion liters, corresponding to 4.8% of total world production, according to official data from IBGE. As stated by an IPARDES report in 2010, Paraná state has 114,488 milk producers, being responsible for an increased production of 71% between 1997 and 2006. Besides such remarkable figures, there are still important challenges to be surpassed in milk chain, which includes environmental adequation of livestock production. According to a study published by Banco do Brasil Foundation and Interamerican Institute for Agricultural Cooperation – IICA in 2010, social and environmental sustainability are among factors restricting milk chain competitiveness. The aim of this paper is to verify waste reuse and disposal in dairy cattle farming in Paraná. Methodological procedures in this research comprised: (a literature review on milk agribusiness system and environmental adequation; (b formulation of semi-structured questionnaires, including questions about environmental practices in 2011; (c data analysis through descriptive statistics. Random sampling included milk producers in Santa Izabel do Oeste and Marechal Candido Rondon, in southwestern Paraná. Eighty producers were interviewed, equally sampled in both places, resulting in 79 valid interviews. As results, 79.4% of milk producers informed they have day-to-day practices to reuse wastes internally produced in farming. Main practice highlighted was the use of manure waste in agriculture. Only one producer in the sample adopted the use of poultry manure. Considering correct disposal of pesticide packaging, 84.4% of producers are in accordance to legal requirements; 10.1% of total interviewed producers do not follow legal requirement for packaging disposal, and 5% do not use pesticides at all, so not being concerned to that practice. Concerning appropriate disposal of medical

  20. Use and Characteristics of Electronic Health Record Systems among Office-Based Physician Practices: United States, ...

    Science.gov (United States)

    ... the National Technical Information Service NCHS Use and Characteristics of Electronic Health Record Systems Among Office-based ... physicians that collects information on physician and practice characteristics, including the adoption and use of EHR systems. ...

  1. 12 CFR 7.5004 - Sale of excess electronic capacity and by-products.

    Science.gov (United States)

    2010-01-01

    ... bank's needs for banking purposes include: (1) Data processing services; (2) Production and... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Sale of excess electronic capacity and by-products. 7.5004 Section 7.5004 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY...

  2. The commoditization of consumer electronics products and its influence on packaging design

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2008-01-01

    The traditional purpose of packaging for consumer electronics (CE) products was to get them in one piece from the factory to the consumers home. It was purely focused on the physical distribution. In that time, buying a CE product could be considered a major family investment. However, times have

  3. 2006 China Machinery and Electronical Products Trade Fair:Ample Fruits Shown

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ 2006 Malaysia China Machinery and Electronical Products Trade Fair, organized by China Council for the Promotion of International Trade(CCPIT), was held in August in Prince World Trade Center(PWTC), Kuala Lumpur.

  4. Optically pumped electron spin polarized targets for use in the production of polarized ion beams

    International Nuclear Information System (INIS)

    Anderson, L.W.

    1979-01-01

    The production of relatively dense electron spin polarized alkali metal vapor targets by optical pumping with intense cw dye lasers is discussed. The target density and electron spin polarization depend on the dye laser intensity and bandwidth, the magnetic field at the target, and the electron spin depolarization time. For example in a magnetic field of 1.5 x 10 3 G, and using 1 W dye laser with a bandwidth of 10 10 Hz one can construct an electron spin polarized Na vapor target with a target thickness of 1.6 x 10 13 atoms/cm 2 and an average electron spin polarization of about 90% even though the Na atoms are completely depolarized at every wall collision. Possible uses of the electron spin polarized targets for the production of intense beams of polarized H - or 3 He - ions are discussed. (orig.)

  5. A study of best management practices for enhancing productivity in building projects: construction methods perspectives

    Directory of Open Access Journals (Sweden)

    Argaw Tarekegn Gurmu

    2016-09-01

    Full Text Available This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry-wide survey to prioritize the best practices. Accordingly, project start-up plan, traffic control plan, machinery positioning strategy, project completion plan, and dynamic site layout plan were shown to be the top five best practices for construction methods. The study also revealed that high levels of implementation of best practices are associated with low levels of project delays. The use of best practices also varied according to the project costs. There were no discernible differences between the top five best practices. The authors suggest that they should be implemented jointly to improve productivity in building projects. Contractors could use the logistic regression model developed, to predict the probability of exceeding a baseline productivity factor and, on that basis, implement corrective actions to achieve the desired level of productivity.

  6. Initial Assessment of Electron and X-Ray Production and Charge Exchange in the NDCX-II Accelerator

    International Nuclear Information System (INIS)

    Cohen, R.H.

    2010-01-01

    The purpose of this note is to provide initial assessments of some atomic physics effects for the accelerator section of NDCX-II. There are several effects we address: the production of electrons associated with loss of beam ions to the walls, the production of electrons associated with ionization of background gas, the possibly resultant production of X-rays when these electrons hit bounding surfaces, and charge exchange of beam ions on background gas. The results presented here are based on a number of caveats that will be stated below, which we will attempt to remove in the near future.

  7. New electron-ion-plasma equipment for modification of materials and products surface

    International Nuclear Information System (INIS)

    Koval', N.N.

    2013-01-01

    Electron-ion-plasma treatment of materials and products, including surface clearing and activation, formation surface layers with changed chemical and phase structure, increased hardness and corrosion resistance; deposition of various functional coatings, has received a wide distribution in a science and industry. Widespread methods of ion-plasma modification of material and product surfaces are ion etching and activation, ion-plasma nitriding, arc or magnetron deposition of functional coatings, including nanostructured. The combination of above methods of surface modification allows essentially to improve exploitation properties of treated products and to optimize the characteristics of modified surfaces for concrete final requirements. For the purpose of a combination of various methods of ion-plasma treatment in a single work cycle at Institute of High Current Electronics of SB RAS (IHCE SB RAS) specialized technological equipment 'DUET', 'TRIO' and 'QUADRO' and 'KVINTA' have been developed. This equipment allow generating uniform low-temperature gas plasma at pressures of (0.1-1) Pa with concentration of (10 9 -10 11 ) cm -3 in volume of (0.1-1) m 3 . In the installations consistent realization of several various operations of materials and products treatment in a single work cycle is possible. The operations are preliminary heating and degassing, ion clearing, etching and activation of materials and products surface by plasma of arc discharges; chemicothermal treatment (nitriding) for formation of diffusion layer on a surface of treated sample using plasma of nonself-sustained low-pressure arc discharge; deposition of single- or multilayered superhard (≥40 GPa) nanocrystalline coatings on the basis of pure metals or their compounds (nitrides, carbides, carbonitrides) by the arc plasma-assisted method. For realization of the modes all installations are equipped by original sources of gas and metal plasma. Besides, in

  8. Good manufacturing practices for medicinal products for human use.

    Science.gov (United States)

    Gouveia, Bruno G; Rijo, Patrícia; Gonçalo, Tânia S; Reis, Catarina P

    2015-01-01

    At international and national levels, there are public and private organizations, institutions and regulatory authorities, who work and cooperate between them and with Pharmaceutical Industry, in order to achieve a consensus of the guidelines and laws of the manufacturing of medicinal products for human use. This article includes an explanation of how operate and cooperate these participants, between them and expose the current regulations, following the line of European Community/European Economic Area, referencing, wherever appropriate, the practiced guidelines, outside of regulatory action of space mentioned. In this way, it is intended to achieve quality, security and effectiveness exceptional levels in the manufacturing of health products. Good Manufacturing Practice aim the promotion of the human health and consequently, to the improvement of quality of life. For achieve the proposed objectives, it is necessary to ensure the applicability of the presented concepts and show the benefits arising from this applicability.

  9. Good manufacturing practices for medicinal products for human use

    Science.gov (United States)

    Gouveia, Bruno G.; Rijo, Patrícia; Gonçalo, Tânia S.; Reis, Catarina P.

    2015-01-01

    At international and national levels, there are public and private organizations, institutions and regulatory authorities, who work and cooperate between them and with Pharmaceutical Industry, in order to achieve a consensus of the guidelines and laws of the manufacturing of medicinal products for human use. This article includes an explanation of how operate and cooperate these participants, between them and expose the current regulations, following the line of European Community/European Economic Area, referencing, wherever appropriate, the practiced guidelines, outside of regulatory action of space mentioned. In this way, it is intended to achieve quality, security and effectiveness exceptional levels in the manufacturing of health products. Good Manufacturing Practice aim the promotion of the human health and consequently, to the improvement of quality of life. For achieve the proposed objectives, it is necessary to ensure the applicability of the presented concepts and show the benefits arising from this applicability. PMID:25883511

  10. 76 FR 72439 - Certain Consumer Electronics and Display Devices and Products Containing Same; Receipt of...

    Science.gov (United States)

    2011-11-23

    ... INTERNATIONAL TRADE COMMISSION [DN 2858] Certain Consumer Electronics and Display Devices and.... International Trade Commission has received a complaint entitled In Re Certain Consumer Electronics and Display... importation of certain consumer electronics and display devices and products containing same. The complaint...

  11. Reliability technology principles and practice of failure prevention in electronic systems

    CERN Document Server

    Pascoe, Norman

    2011-01-01

    A unique book that describes the practical processes necessary to achieve failure free equipment performance, for quality and reliability engineers, design, manufacturing process and environmental test engineers. This book studies the essential requirements for successful product life cycle management. It identifies key contributors to failure in product life cycle management and particular emphasis is placed upon the importance of thorough Manufacturing Process Capability reviews for both in-house and outsourced manufacturing strategies. The readers? attention is also drawn to the ma

  12. Electronic health record "super-users" and "under-users" in ambulatory care practices.

    Science.gov (United States)

    Rumball-Smith, Juliet; Shekelle, Paul; Damberg, Cheryl L

    2018-01-01

    This study explored variation in the extent of use of electronic health record (EHR)-based health information technology (IT) functionalities across US ambulatory care practices. Use of health IT functionalities in ambulatory care is important for delivering high-quality care, including that provided in coordination with multiple practitioners. We used data from the 2014 Healthcare Information and Management Systems Society Analytics survey. The responses of 30,123 ambulatory practices with an operational EHR were analyzed to examine the extent of use of EHR-based health IT functionalities for each practice. We created a novel framework for classifying ambulatory care practices employing 7 domains of health IT functionality. Drawing from the survey responses, we created a composite "use" variable indicating the extent of health IT functionality use across these domains. "Super-user" practices were defined as having near-full employment of the 7 domains of health IT functionalities and "under-users" as those with minimal or no use of health IT functionalities. We used multivariable logistic regression to investigate how the odds of super-use and under-use varied by practice size, type, urban or rural location, and geographic region. Seventy-three percent of practices were not using EHR technologies to their full capability, and nearly 40% were classified as under-users. Under-user practices were more likely to be of smaller size, situated in the West, and located outside a metropolitan area. To achieve the broader benefits of the EHR and health IT, health systems and policy makers need to identify and address barriers to full use of health IT functionalities.

  13. Software product line engineering for consumer electronics : Keeping up with the speed of innovation

    NARCIS (Netherlands)

    Hartmann, Herman

    2015-01-01

    During the last decade consumer electronics products have changed radically. Traditionally these products were used for a few dedicated tasks, and were implemented through hardware. Nowadays, these products are used for a variety of tasks and are largely implemented through software. Furthermore

  14. Novel production techniques of radioisotopes using electron accelerators

    Science.gov (United States)

    Lowe, Daniel Robert

    Non-traditional radioisotope production techniques using a compact, high power linear electron accelerator have been demonstrated and characterized for the production of 18F, 47Sc, 147 Pm, and 99mTc from a variety of target candidates. These isotopes are used extensively in the medical field as diagnostic and therapy radioisotopes, as well as the space industry as RTG's. Primary focus was placed on 99mTc as it constitutes approximately 80% of all diagnostic procedures in the medical community that use radioactive tracers. It was also the prime focus due to recent events at the Chalk River nuclear reactor, which caused global shortages of this isotope a few years ago. A Varian K15 LINAC was first used to show proof of principle in Las Vegas. Various samples were then taken to the Idaho Accelerator Center where they were activated using an electron LINAC capable of electron energies from 4 to 25 MeV at a beam power of approximately 1 kW. Production rates, cross sections, and viability studies were then performed and conducted to assess the effectiveness of the candidate target and the maximum production rate for each radioisotope. Production rates for 18F from lithium fluoride salts were shown to be ideal at 21MeV, namely 1.7 Ci per kg of LiF salt, per kW of beam current, per 10 hour irradiation time. As the typical hospital consumption of 18F is around 500 mCi per day, it is clear that a large amount of 18F can be made from a small (300 gram) sample of LiF salt. However, since there is no current separation process for 18F from 19F, the viability of this technique is limited until a separations technique is developed. Furthermore, the calculated cross section for this reaction is in good agreement with literature, which supports the techniques for the isotopes mentioned below. Production rates for 47Sc from vanadium oxide targets were shown to be a maximum at 25 MeV with a production rate of 2 mCi per day, assuming a 2 kW beam and a 10 kg target. While this

  15. 77 FR 21584 - Certain Consumer Electronics and Display Devices and Products Containing Same; Institution of...

    Science.gov (United States)

    2012-04-10

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-836] Certain Consumer Electronics and Display... electronics and display devices and products containing same by reason of infringement of certain claims of U... importation, or the sale within the United States after importation of certain consumer electronics and...

  16. Neutron production in the interaction of electrons with a dispersing lamella

    International Nuclear Information System (INIS)

    Soto B, T. G.; Baltazar R, A.; Medina C, D.; Vega C, H. R.

    2017-10-01

    When a Linac for radiotherapy operates with acceleration voltages greater than 8 MV, neutrons are produced as secondary radiation. They deposit an undesirable and not negligible dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, cancer treatment with a Linac is done with photon or electron beams, which produce neutrons through reactions (γ, n) and e, e n) respectively. Because the effective section of the reaction (n, γ) is 137 times greater than the reaction (e, e n), most studies have focused on photo neutrons. When a Linac operates with electron beams, the beam that leaves the magnetic baffle is incised in the dispersion foil in order to cause quasi-elastic interactions and expand the spatial distribution of the electrons; in their interaction with the lamella the electrons produce photons and these in turn produce neutrons. Due to the radiobiological efficiency of neutrons and the ways in which they interact with matter, is important to determine the neutrons production in Linacs operating in electron mode. The objective of this work is to determine the characteristics of photons and neutrons that occur when a beam of mono-energetic electrons of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm thick located in the center of a 10 cm thick tungsten shell, used to represent the accelerator head. The study was carried out using the Monte Carlo method with the MCNP6 code for electron beams of 12 and 18 MeV. The spectra of photons and neutrons were estimated in 6 point detectors, four were placed in different points equidistant from the center of the lamella and the other two were located at 50 cm and 1 m from the electron beam, simulating the totally closed head. In this work it was found that when a Linac operates with an electron beam of 12 or 18 MeV there is neutron production mainly in the head and in the direction of the beam. (Author)

  17. 78 FR 52211 - Certain Electronic Devices Having Placeshifting or Display Replication and Products Containing...

    Science.gov (United States)

    2013-08-22

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-878] Certain Electronic Devices Having Placeshifting or Display Replication and Products Containing Same; Commission Determination Not To Review an... States after importation of certain electronic devices having placeshifting or display replication...

  18. Thermal Management of Software Changes in Product Lifecycle of Consumer Electronics

    OpenAIRE

    Muraoka , Yoshio; Seki , Kenichi; Nishimura , Hidekazu

    2014-01-01

    Part 6: Industry and Consumer Products; International audience; Because the power consumption of consumer electronic products varies according to processor execution, which depends on software, thermal risk may be increased by software changes, including software updates or the installation of new applications, even after hardware development has been completed. In this paper, we first introduce a typical system-level thermal simulation model, coupling the activities within modules related to...

  19. Best Practices Regarding the Use of Electronic Environment for Romanian Tourism Development

    Directory of Open Access Journals (Sweden)

    Irina Maiorescu

    2016-05-01

    Full Text Available Information and Communication Technology (ICT plays an important role in all sectors of activity, hence in tourism sector too. Starting from this fact, authors consider as important identifying and implementing best practices in electronic environment for sustainable development of tourism in Romania. Traditional tourism - implying at all stages specialized human support – knows profound modifications. Today, current statistics show that more and more people dive into virtual environment for visualizing new places and finding out new information, for cross border business meetings, for entertainment as well as for communication. Hence, the current paper – presenting the results of a complex quantitative research, aims to discuss about the influence of virtual environment upon tourism in what concerns informing, planning and organizing a trip. The obtained results led towards recommendations for developing ICT facilities, especially for business tourism, for an extensive use of web-GIS applications during the three phases of travel, for improving infrastructure and mobile applications, especially for young people, as well as for implementing digital systems that investigate tourists’ behaviour and personalize tourism offers. The final purpose of the paper is to contribute to the development of best practices that lead to economic growth in tourism, by quantifying the impact of electronic environment upon visiting experiences.

  20. Temporary acceleration of electrons while inside an intense electromagnetic pulse

    Directory of Open Access Journals (Sweden)

    Kirk T. McDonald

    1999-12-01

    Full Text Available A free electron can temporarily gain a very significant amount of energy if it is overrun by an intense electromagnetic wave. In principle, this process would permit large enhancements in the center-of-mass energy of electron-electron, electron-positron, and electron-photon interactions if these take place in the presence of an intense laser beam. Practical considerations severely limit the utility of this concept for contemporary lasers incident on relativistic electrons. A more accessible laboratory phenomenon is electron-positron production via an intense laser beam incident on a gas. Intense electromagnetic pulses of astrophysical origin can lead to very energetic photons via bremsstrahlung of temporarily accelerated electrons.

  1. Multiple electromagnetic electron-positron pair production in relativistic heavy-ion collisions

    International Nuclear Information System (INIS)

    Alscher, A.; Hencken, K.; Trautmann, D.; Baur, G.

    1997-01-01

    We calculate the cross sections for the production of one and more electron-positron pairs due to the strong electromagnetic fields in relativistic heavy-ion collisions. We derive the N-pair amplitude using the generating functional of fermions in an external field and the path-integral formalism. The N-pair production probability is found to be an approximate Poisson distribution. We calculate total cross sections for the production of one pair in lowest order, including corrections from the Poisson distribution up to third order. Furthermore, we calculate cross sections for the production of up to five pairs including corrections from the Poisson distribution. copyright 1997 The American Physical Society

  2. Production of annular electron beams by foilless diodes

    International Nuclear Information System (INIS)

    Miller, R.B.; Prestwich, K.R.; Poukey, J.W.; Shope, S.L.

    1980-01-01

    A number of important aspects of the production of annular electron beams by foilless diodes are examined, both theoretically and experimentally. The theories of Ott, Antonsen, and Lovelace (OAL) and Chen and Lovelace (CL) are compared, and the CL theory is extended to include the effect of an axial gap in an approximate fashion. For the case of finite magnetic field strengths, Larmor orbits are examined and radial oscillations of the beam profile are predicted from a beam envelope analysis. Experimental results obtained with both low- and high-impedance sources have been compared with the theory, and based on such studies, the design and construction of an intense hollow beam generator are described. Experimental results obtained with the new diode compare favorably with both the analytic theory and the results of numerical simulations. The device currently produces 2-MeV electrons at beam currents of 65--70 kA

  3. Electron sterilization validation techniques using the controlled depth of sterilization process

    International Nuclear Information System (INIS)

    Cleghorn, D.A.; Nablo, S.V.

    1990-01-01

    Many pharmaceutical products, especially parenteral drugs, cannot be sterilized with gamma rays or high energy electrons due to the concomitant product degradation. In view of the well-controlled electron energy spectrum available in modern electron processors, it is practical to deliver sterilizing doses over depths considerably less than those defining the thickness of blister-pack constructions or pharmaceutical containers. Because bremsstrahlung and X-ray production are minimized at these low electron energies and in these low Z materials, very high electron: penetrating X-ray dose ratios are possible for the application of the technique. Thin film dosimetric techniques have been developed utilizing radiochromic film in the 10-60 g/m 2 range for determining the surface dose distribution in occluded surface areas where direct electron illumination is not possible. Procedures for validation of the process using dried spore inoculum on the product as well as in good geometry are employed to determine the process lethality and its dependence on product surface geometry. Applications of the process to labile pharmaceuticals in glass and polystyrene syringes are reviewed. It has been applied to the sterilization of commercial sterile products since 1987, and the advantages and the natural limitations of the technique are discussed. (author)

  4. Postharvest Practices for Organically Grown Products

    Directory of Open Access Journals (Sweden)

    Ilić Zoran S.

    2018-03-01

    Full Text Available Quality of produce cannot be improved after harvest, only maintained. Postharvest handling depends on the specific conditions of production, season, method of handling, and distance to market. Under organic production, growers harvest and market their produce at or near the peak ripeness more commonly than in many conventional systems. Organic production often includes more specialty varieties whose shelf life and shipping traits are reduced or even inherently poor. Harvesting and handling techniques that minimize injury to the commodity, as well as increased care with field and packinghouse sanitation, (chlorine, ozone, calcium hypochlorite, sodium hypochlorite and chlorine dioxide, acetic acid, peroxyacetic acid, vinegar, ethyl alcohol, hydrogen peroxide, etc. during postharvest processes are vital components of a postharvest management plan for organic products. Sodium carbonate, sodium bicarbonate, and physical treatments such as heat treatments (as hot water treatment or dips, short hot water rinsing and brushing or hot air can significantly lower the disease pressure on the harvested commodities. These sanitation practices are very easy to implement in the organic food production chain. They start in the field and continue during harvesting, sorting, packing, and transportation and continue even in the consumer’s home. All those treatments reduce rot development, provide quarantine security, and preserve fruit quality during cold storage and shelf life. In addition, the use chitosan, propolis, methyl jasmonate, essential oils, carnuba wax, biocontrol agents and modified atmosphere packaging can also reduce decay development during prolonged storage. All these treatments can be applied alone or in combination with each other in order to improve decay control after harvest and provide a healthy and safe product to the consumer. The aim of this chapter is to shed more light on the latest information on permitted treatments for organic

  5. Integrating clinical theory and practice in an epilepsy-specific electronic patient record.

    LENUS (Irish Health Repository)

    Breen, Patricia

    2009-01-01

    This study\\'s objective was to assess the usability of the epilepsy history module of the electronic patient record, developed at Beaumont Hospital, and to identify opportunities for improvement. Observation, interview and document analysis methods were used. Results indicated that the module was useable but the design did not work as well in practice as anticipated by theory. The next iteration of the module included identified enhancements; this iteration is currently in use.

  6. Good Security Practices for Electronic Commerce, Including Electronic Data Interchange

    National Research Council Canada - National Science Library

    Saltman, Roy

    1993-01-01

    Electronic commerce (EC) is the use of documents in electronic form, rather than paper, for carrying out functions of business or government that require interchange of information, obligations, or monetary value between organizations...

  7. Radiopharmaceuticals good practices handbook: ARCAL XV radiopharmaceuticals control and production

    International Nuclear Information System (INIS)

    Verdera Presto, Silvia

    1998-01-01

    A safety practice of the therapeutics diagnostic proceeding in nuclear medicine require a permanent provide high quality radiopharmaceuticals manufacture. This work treat to give a guide for all radio pharmacies laboratories that produce,control, fraction and or dispense radiopharmaceuticals products, with attention hospitable radiopharmacy laboratory. Three chapters with recommendations in manufacture good practice in Hospital radiopharmacy, industrial centralized, bibliography and three annexe's about clean area classification,standards work in laminar flux bell, and guarantee and cleaning areas

  8. A Practical Approach to Rainbow Trout (Oncorhynchus mykiss) Seed Production

    OpenAIRE

    , Orhan Çakır

    2002-01-01

    Rainbow trout (Oncorhynchus mykiss) grows faster and has great disease resistance. Therefore this species has been preferred to culture for years. Fry production, feeding and management of broodstock are explained practically in order to increase profitability.

  9. 75 FR 38127 - Visteon Systems, LLC North Penn Plant Electronics Products Group Including On-Site Leased Workers...

    Science.gov (United States)

    2010-07-01

    ..., North Penn Plant, Electronics Products Group to be covered by this certification. The intent of the... North Penn Plant Electronics Products Group Including On-Site Leased Workers From Ryder Integrated... Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment...

  10. Use of sanitizing products: safety practices and risk situations

    Directory of Open Access Journals (Sweden)

    Ana Aurélia Rocha da Silva

    2014-04-01

    Full Text Available OBJECTIVES: to evaluate the handling and risk factors for poisoning and/or digestive tract injuries associated with the use of sanitizing products at home. METHODS: interviews were conducted in 419 households from different regions, collecting epidemiological data from residents and risk habits related to the use and storage of cleaning products. RESULTS: sanitizing products considered to be a health risk were found in 98% of the households where the research was conducted, and in 54% of cases, they were stored in places easily accessible to children. Lye was found in 19%, followed by illicit products in 39% of homes. In 13% of households, people produced soap, and in 12% they stored products in non-original containers. The use of illicit products and the manufacture of handmade soap were associated with lower educational level of the household owners and with the regions and socioeconomic classes with lower purchasing power. CONCLUSIONS: risk practices such as inadequate storage, manufacturing, and use of sanitizing products by the population evidence the need for public health policies, including educational measures, as a means of preventing accidents.

  11. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... studies both purely descriptive and studies identifying success and failure factors, but almost no studies of how companies actually undertake improve-ments, which problems they encounter,, and how/whether they overcome these problems. Action research is proposed as a suitable method for studying...

  12. Estimating morbidity rates from electronic medical records in general practice: evaluation of a grouping system.

    NARCIS (Netherlands)

    Biermans, M.C.J.; Verheij, R.A.; Bakker, D.H. de; Zielhuis, G.A.; Vries Robbé, P.F. de

    2008-01-01

    Objectives: In this study, we evaluated the internal validity of EPICON, an application for grouping ICPCcoded diagnoses from electronic medical records into episodes of care. These episodes are used to estimate morbidity rates in general practice. Methods: Morbidity rates based on EPICON were

  13. Sales of Nicotine-Containing Electronic Cigarette Products: United States, 2015.

    Science.gov (United States)

    Marynak, Kristy L; Gammon, Doris G; Rogers, Todd; Coats, Ellen M; Singh, Tushar; King, Brian A

    2017-05-01

    To assess the proportion of electronic cigarette (e-cigarette) products sold in the United States that contain nicotine according to retail scanner data. We obtained unit sales data from January 11, 2015, to December 12, 2015, from The Nielsen Company for convenience stores; supermarkets; mass merchandisers; drug, club, and dollar stores; and Department of Defense commissaries. The data did not include purchases from tobacco specialty shops, "vape shops," or online sources. Nicotine content was assessed by product type (disposables, rechargeables, and refills), region, and flavor status based on nicotine strength listed in the Universal Product Codes. For the 36.7% of entries lacking nicotine content information, we conducted Internet searches by brand, product, and flavor. In 2015, 99.0% of e-cigarette products sold contained nicotine, including 99.0% of disposables, 99.7% of rechargeables, and 98.8% of refills. Overall, 98.7% of flavored e-cigarette products and 99.4% of nonflavored e-cigarette products contained nicotine. In 2015, almost all e-cigarette products sold in US convenience stores and other assessed channels contained nicotine. Public Health Implications. Findings reinforce the importance of warning labels for nicotine-containing products, ingredient reporting, and restrictions on sales to minors.

  14. Shallow irradiation of vienna sausage by electron beams in preventation of the slime production

    International Nuclear Information System (INIS)

    Watanabe, Hiroshi; Kume, Tamikazu; Ito, Hitoshi; Aoki, Shohei; Sato, Tomotaro

    1975-01-01

    Vienna sausages get spoiled by slime production or putrefaction due to the propagation of microorganisms when stored for 3 to 5 days at 10 deg C. The radiation pasteurization of vienna sausages has mainly been studied with gamma irradiation. The slime of sausages is believed to be microorganisms themselves growing on the surface of the sausages. Pasteurization of the surface of vienna sausages with electron irradiation was thus investigated. The results obtained are as follows: The vienna sausages irradiated with a dose of 0.8 to approximately 1.0 Mrad by 0.5 MeV electrons could be stored without slime production or putrefaction for more than a week at 11 deg C. The effect of pasteurization increased with energy and dose of electrons. However, the changes in the organoleptic qualities of vienna sausages were detected when irradiated with a dose of over 0.7 Mrad by 2.0 MeV electrons. Consequently, the irradiation with a dose of 1.0 Mrad by 1.0 MeV electrons was effectual in lengthening their shelf-life without deterioration of the organoleptic qualities. (author)

  15. Production of Mg and Al Auger electrons by noble gas ion bombardment of Mg and Al surfaces. [3 KeV, electron promotion

    Energy Technology Data Exchange (ETDEWEB)

    Ferrante, J; Pepper, S V [National Aeronautics and Space Administration, Cleveland, Ohio (USA). Lewis Research Center

    1976-08-01

    In this letter the relative production efficiency of Mg and Al Auger electrons by He, Ne, Ar, Kr and Xe ion bombardment as a function of ion energy (<=3 keV) is reported. Some comments on the interpretation of the results in terms of electron promotion are also given.

  16. Enhancing engineering practices for productivity and profits in agro-allied industries

    International Nuclear Information System (INIS)

    Esan, A. A.

    2000-08-01

    The word productivity is a part of everyday vocabulary of industrial engineers and managers. Terms such as optimum utilization of resources, operational efficiency, product competitiveness, maintenance culture, etc., are mentioned with regular frequency. This is healthy, because productivity improvement does not happen by wishing for it or trying harder but by deliberately planning for it. The rewards of higher productivity are immense. At the firm level, such benefit include high production rates, higher profits, better quality products and services, customer satisfaction, higher take home pay for employees and high employee morale. Many of these benefits can be derived through the application of simple potential productivity improvement tools that are hinged on engineering practices

  17. The effect of production system and management practices on the ...

    African Journals Online (AJOL)

    User

    The effect of production system and management practices on the quality of ... contains more yellow pigments, which may affect a consumer's choice to purchase. ... which is better utilized, and much more attention is given to animal ethics, ...

  18. [Pharmaceutical product quality control and good manufacturing practices].

    Science.gov (United States)

    Hiyama, Yukio

    2010-01-01

    This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

  19. Practical Measurement and Productive Persistence: Strategies for Using Digital Learning System Data to Drive Improvement

    Science.gov (United States)

    Krumm, Andrew E.; Beattie, Rachel; Takahashi, Sola; D'Angelo, Cynthia; Feng, Mingyu; Cheng, Britte

    2016-01-01

    This paper outlines the development of practical measures of productive persistence using digital learning system data. Practical measurement refers to data collection and analysis approaches originating from improvement science; productive persistence refers to the combination of academic and social mindsets as well as learning behaviours that…

  20. 77 FR 14422 - Certain Consumer Electronics and Display Devices and Products Containing Same; Notice of Receipt...

    Science.gov (United States)

    2012-03-09

    ... INTERNATIONAL TRADE COMMISSION [DN 2882] Certain Consumer Electronics and Display Devices and... the U.S. International Trade Commission has received a complaint entitled Certain Consumer Electronics... importation of certain consumer electronics and display devices and products containing same. The complaint...

  1. Soil management practices for sustainable crop production

    International Nuclear Information System (INIS)

    Abalos, E.B.

    2005-01-01

    In a sustainable system, the soil is viewed as a fragile and living medium that must be protected and nurtured to ensure its long-term productivity and stability. However, due to high demand for food brought about by high population as well as the decline in agricultural lands, the soil is being exploited beyond its limit thus, leading to poor or sick soils. Sound soil management practices in the Philippines is being reviewed. The technologies, including the advantages and disadvantages are hereby presented. This includes proper cropping systems, fertilizer program, soil erosion control and correcting soil acidity. Sound soil management practices which conserve organic matter for long-term sustainability includes addition of compost, maintaining soil cover, increasing aggregates stability, soil tilt and diversity of soil microbial life. A healthy soil is a key component to sustainability as a health soil produce healthy crop plants and have optimum vigor or less susceptible to pests. (author)

  2. The System Dynamics Model in Electronic Products Closed-Loop Supply Chain Distribution Network with Three-Way Recovery and the Old-for-New Policy

    Directory of Open Access Journals (Sweden)

    Xiao-qing Zhang

    2016-01-01

    Full Text Available With the technological developments and rapid changes in demand pattern, diverse varieties of electronic products are entering into the market with reduced lifecycle which leads to the environmental problems. The awareness of electronic products take-back and recovery has been increasing in electronic products supply chains. In this paper, we build a system dynamics model for electronic products closed-loop supply chain distribution network with the old-for-new policy and three electronic products recovery ways, namely, electronic products remanufacturing, electronic component reuse and remanufacturing, and electronic raw material recovery. In the simulation study, we investigate the significance of various factors including the old-for-new policy, collection and remanufacturing, their interactions and the type of their impact on bullwhip, and profitability through sensitivity analysis. Our results instruct that the old-for-new policy and three electronic products recovery ways can reduce the bullwhip effect in the retailers and the distributors and increases the profitability in the closed-loop supply chain distribution network.

  3. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  4. The IAEA activities supporting implementation of best practice in uranium production cycle

    International Nuclear Information System (INIS)

    Slezak, J.

    2010-01-01

    'Full text:' Since the International Atomic Energy Agency's foundation in 1957, the Agency has had an increasing interest in uranium production cycle (UPC) developments. Recent activities cover tasks on uranium geology & deposits, exploration, mining & processing including environmental issues. The two projects titles are (1) Updating uranium resources, supply and demand and nuclear fuel cycle databases and (2) Supporting good practices in the UPC in particular for new countries. Based o the recent experience, one of the new activities is focused at human resources development to improve application of best practice called Uranium Production Cycle Network (UPNet). (author)

  5. Product Innovation in High-tech SMEs: A Case Study of Weili Electronics Co.,Ltd

    Institute of Scientific and Technical Information of China (English)

    HE Zheng; LI Shi-ming

    2006-01-01

    Product innovation is an important strategy for high-tech firms, especially for small and medium enterprises. This paper proposes that the technological strategies for SMEs are dynamic and during different phase, there is different innovation strategy which leads to various market performances. In particular, through the case study of Weili Electronics Co., Ltd, we find that organizational learning abilities play a fundamental role in strategic decision. In addition, the frameworks for the determinants of technological strategies in three stages are established to illustrate the evolutionary processes of product innovation in Weili Electronics Co., Ltd.

  6. Selectron production in quasi-elastic electron-proton scattering

    International Nuclear Information System (INIS)

    Bartels, J.; Hollik, W.

    1985-08-01

    We calculate the cross section for the production of selectrons in quasi-elastic electron proton scattering at HERA energies. In the region of very small momentum transfer the cross section turns out to be large: e.g. sigma=36 pb for a selectron mass of 60 GeV, tsub(min) 2 ), and photino mass small compared to the selectron mass. Together with the clean experimental signature, this large cross section makes the reaction e+P->e+γ tilde+P one of the most promising HERA-processes in connection with the search for supersymmetric particles. (orig.)

  7. Exploiting abstract possibilities: a critique of the concept and practice of product patenting.

    Science.gov (United States)

    Radder, Hans

    2004-01-01

    Developments in biotechnology and genomics have moved the issue of patenting scientific and technological inventions toward the center of interest. In particular, the patentability of genes of plants, animals, or humans and of genetically modified (parts of) living organisms has been discussed, and questioned, from various normative perspectives. This paper aims to contribute to this debate. For this purpose, it first explains a number of relevant aspects of the theory and practice of patenting. The focus is on a special and increasingly significant type of patents, namely product patents. The paper provides three general arguments against the concept and practice of product patenting. The first argument briefly considers the claim that patents are legitimate because they promote socially useful innovation. Against this claim, it is argued that product patents may hamper rather than promote such innovation. The second and main argument concludes that product patents are not adequately based on actual technological inventions, as they should be according to the usual criteria of patentability. The principal moral issue is that product patents tend to reward patentees for inventions they have not really made available. The final argument proposes a method for patenting the heat of the sun. Assuming that granting this patent will be generally considered absurd, the argument exposes a further, fundamental problem of the concept and practice of product patenting.

  8. Rapid Production Ramp-up for International Collaborative Supply Network in Electronics Goods Industry (X-Box, PS II, I-Pod, Etc) A Review of Existing Practices, Issues, and Challenges

    OpenAIRE

    Hu, Ning

    2006-01-01

    The fierce competition of international consumer electronics market has brought more pressures on the manufacturing section especially in the context of globalization. The global producers have to find effective solution to cope with the challenges such as shorter and shorter product life, less and less customer loyalty and resources limitation. The fact that rapid production ramp up and supply network collaboration could benefit their performance has been recognized by many business giants s...

  9. Starting electronics all you need to get a grounding in practical electronics

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Starting Electronics is a nine-chapter introductory text to electronics based on feature articles previously published as magazine articles. The opening chapter provides an overview of the fundamentals of electronics. The succeeding chapters present details of some easy-to-do experiments and the current and voltage measurement. The remaining chapters cover some basic components of electronics, including capacitor, integrated circuit, oscillator, filter, diodes, and transistors. This book will prove useful to electronic constructors and students.

  10. Two tools for environmentally conscious designers and product developers of electrical & electronic equipment (EEE)

    DEFF Research Database (Denmark)

    Poll, Christian; Hauschild, Michael Zwicky; Olsen, Stig Irving

    2002-01-01

    The paper presents the two tools 1)"Product families - short cuts to environmental knowledge" and 2)"Eco-conscious design of electrical & electronic equipment (EEE)". Tool 1) comes in form of a handbook. The purpose of this handbook is to ease the work with developing more environmentally sound...... products, thus giving guidelines for development of new products without the companies themselves having to perform an LCA. The handbook describes 5 productfamilies: mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting, ventilation. Tool 2) comes in form of a software tool...... with built in training, guidance, references, calculator and database. The tool provides the basic understanding of how EEE-products in general interact with the environment. The tool gives an overview of the tasks and responsibilities involved in Eco-Desing, and examples of how to choose and quantify...

  11. Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers recommended procedures for the use of dosimeters, such as thermoluminescent dosimeters (TLD's), to determine the absorbed dose in a region of interest within an electronic device irradiated using a Co-60 source. Co-60 sources are commonly used for the absorbed dose testing of silicon electronic devices. Note 1—This absorbed-dose testing is sometimes called “total dose testing” to distinguish it from “dose rate testing.” Note 2—The effects of ionizing radiation on some types of electronic devices may depend on both the absorbed dose and the absorbed dose rate; that is, the effects may be different if the device is irradiated to the same absorbed-dose level at different absorbed-dose rates. Absorbed-dose rate effects are not covered in this practice but should be considered in radiation hardness testing. 1.2 The principal potential error for the measurement of absorbed dose in electronic devices arises from non-equilibrium energy deposition effects in the vicinity o...

  12. 78 FR 19182 - Electronic Filing of Import Inspection Applications for Meat, Poultry, and Egg Products...

    Science.gov (United States)

    2013-03-29

    ...] Electronic Filing of Import Inspection Applications for Meat, Poultry, and Egg Products: Availability of..., and egg products through the Automated Commercial Environment (ACE). ACE is the Web- based portal for... products (21 U.S.C. 620, 466). The Egg Products Inspection Act (EPIA) (21 U.S.C. 1031 et seq.) prohibits...

  13. Evaluating electronic performance support systems: A methodology focused on future use-in-practice

    NARCIS (Netherlands)

    Collis, Betty; Verwijs, C.A.

    1995-01-01

    Electronic performance support systems, as an emerging type of software environment, present many new challenges in relation to effective evaluation. In this paper, a global approach to a 'usage-orientated' evaluation methodology for software product is presented, followed by a specific example of

  14. Exploration and practice in-class practice teaching mode

    Science.gov (United States)

    Zang, Xue-Ping; Wu, Wei-Feng

    2017-08-01

    According to the opto-electronic information science and engineering professional course characteristics and cultivate students' learning initiative, raised the teaching of photoelectric professional course introduce In-class practice teaching mode. By designing different In-class practice teaching content, the students' learning interest and learning initiative are improved, deepen students' understanding of course content and enhanced students' team cooperation ability. In-class practice teaching mode in the course of the opto-electronic professional teaching practice, the teaching effect is remarkable.

  15. Practice of building production planning system of company with a wide range of products - case study

    Directory of Open Access Journals (Sweden)

    Łukasz Hadaś

    2012-09-01

    Full Text Available Background: The complexity of the manufacturing environments of today's mechanical engineering companies and the number of both internal and external restrictions affecting to need of building tailored production planning and control systems. This statement is particularly important in conditions of companies with a wide range of products and different customer service strategies (different locations of the logistics decoupling point otherwise called "order penetration point". Streams of materials in these conditions require different management what is the main reason for carrying out research in business conditions by the authors. Material and methods: The research was carried out in industrial engineering in complex environmental conditions of production. This was a specializing in technology, multi-departments environment, with multiple streams of values and a wide range of products (about 500 items. The work was carried out under the transformation of the production system from the "push" logic of flow to "pull" logic of flow and building a dedicated system based on the best practice approach. Results: The paper describes the process of building tailored hybrid systems in the area of planning and shop flow control of production. The authors present the theoretical considerations on the issue and practical experiences. The authors present factors of selection of the transformation path and its road map. The article describes the part of the authors' own experience in the work on the methodology of transformation of Polish companies in the running business condition. Conclusions: Establishing the methodology of transformation of the production system is not a simple task. This paper presents only selected aspects of complex decision-making process. However, the authors presented work shows the important aspect of the transformation of production systems for these organizational conditions.

  16. Governance and Upgrading Practices in Cloth Production Value Chain

    African Journals Online (AJOL)

    This study examines the governance _pal/ern and upgrading _practices of value chain of cloth _production, focusing on micro and small cloth _producing entetprises in Addis Ababa. The study is based on a sample of 222 respondents drawn from various actors of the value chain in the city. The value chain is found out to ...

  17. Pair production with electron capture in peripheral collisions of relativistic heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Bertulani, C.A.C.A. E-mail: bertu@if.ufrj.br; Dolci, D.D. E-mail: dolci@if.ufrj.br

    2001-02-26

    The production of electron-positron pairs with the capture of the electron in an atomic orbital is investigated for the conditions of the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). Dirac wave functions for the leptons are used, taking corrections to orders of Z{alpha} into account. The dependence on the transverse momentum transfer is studied and the accuracy of the equivalent photon approximation is discussed as a function of the nuclear charge.

  18. Semi-spontaneous oral text production: measurements in clinical practice.

    Science.gov (United States)

    Lind, Marianne; Kristoffersen, Kristian Emil; Moen, Inger; Simonsen, Hanne Gram

    2009-12-01

    Functionally relevant assessment of the language production of speakers with aphasia should include assessment of connected speech production. Despite the ecological validity of everyday conversations, more controlled and monological types of texts may be easier to obtain and analyse in clinical practice. This article discusses some simple measurements for the analysis of semi-spontaneous oral text production by speakers with aphasia. Specifically, the measurements are related to the production of verbs and nouns, and the realization of different sentence types. The proposed measurements should be clinically relevant, easily applicable, and linguistically meaningful. The measurements have been applied to oral descriptions of the 'Cookie Theft' picture by eight monolingual Norwegian speakers, four with an anomic type of aphasia and four without any type of language impairment. Despite individual differences in both the clinical and the non-clinical group, most of the measurements seem to distinguish between speakers with and without aphasia.

  19. Contracting for Efficiency. A Best Practices Guide for Energy-Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-04-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  20. Contracting for Efficiency: A Best Practices Guide for Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Saralyn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Payne, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-11-01

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  1. Production of hydrogen and deuterium negative ions in an electron cyclotron resonance driven plasma

    Energy Technology Data Exchange (ETDEWEB)

    Dougar-Jabon, V.D. [Industrial Univ. of Santander, Bucaramanga (Colombia)

    2001-04-01

    An electron cyclotron resonance source with driven plasma rings for hydrogen isotope ion production is studied. Extracted currents of positive and negative ions depending on gas pressure, microwave power value and extraction voltage are obtained. The study shows that the negative ion yield is an order of magnitude higher than the yield of positive particles when a driven ring is in contact with the surface of the plasma electrode. The production of negative ions of deuterium, D{sup -}, is close to the production of negative ions of light hydrogen isotope, H{sup -}. The comparison of the experimental data with the calculated ones shows that the most probable process of the H{sup -} and D{sup -} ion formation in the electron cyclotron driven plasma is dissociative attachment of electrons to molecules in high Rydberg states. For hydrogen ions and ions of deuterium, the negative current at a microwave power of 200 W through a 3-mm aperture and 8 kV extraction voltage are 4.7 mA and 3.1 mA respectively. (orig.)

  2. Production of hydrogen and deuterium negative ions in an electron cyclotron resonance driven plasma

    International Nuclear Information System (INIS)

    Dougar-Jabon, V.D.

    2001-01-01

    An electron cyclotron resonance source with driven plasma rings for hydrogen isotope ion production is studied. Extracted currents of positive and negative ions depending on gas pressure, microwave power value and extraction voltage are obtained. The study shows that the negative ion yield is an order of magnitude higher than the yield of positive particles when a driven ring is in contact with the surface of the plasma electrode. The production of negative ions of deuterium, D - , is close to the production of negative ions of light hydrogen isotope, H - . The comparison of the experimental data with the calculated ones shows that the most probable process of the H - and D - ion formation in the electron cyclotron driven plasma is dissociative attachment of electrons to molecules in high Rydberg states. For hydrogen ions and ions of deuterium, the negative current at a microwave power of 200 W through a 3-mm aperture and 8 kV extraction voltage are 4.7 mA and 3.1 mA respectively. (orig.)

  3. Studies on the radicidation of natural food colorants. Effects of irradiation with γ-ray and electron beam on functional properties of beet red colorant

    International Nuclear Information System (INIS)

    Higashimura, Yutaka; Tada, Mikiro

    2002-01-01

    For the practical use of radicidation, we studied on the effects of γ-ray and electron beam on functional properties of beet red colorant, natural colors with low heat stability and high possibility of microbe contamination. Neither γ-ray or electron beam had any significant influence on color contents and color tone of red beet products at less than 10 kGy of irradiation for the practical use. Influence of moisture content at level of less than 20% in powdered product was not observed. The results suggest that both γ-ray and electron beam irradiation is significantly effective in decontamination of powdered beet red products. (author)

  4. A New View at the Planning Marketing Popular Products: Exploratory Study Electronics Sector with Companies in Brazil.

    OpenAIRE

    Evange Elias Assis; Francisco Antonio Serralvo; Karen Perrotta Lopes de Almeida Prado

    2015-01-01

    The increased consumption of appliance and electronic products by lower-income population represented a growth opportunity for companies in the sector. The overall objective of this paper is to investigate how appliance and electronic product manufacturers draw up their marketing planning for low-end products. An exploratory approach was taken in this study, comprising the literature review and the empirical research which was conducted in two stages by combining the qualitative and quantitat...

  5. Knowledge, attitudes and clinical practice of blood products prescribers in Niamey.

    Science.gov (United States)

    Mayaki, Z; Kabo, R; Moutschen, M; Albert, A; Dardenne, N; Sondag, D; Gérard, C

    2016-05-01

    The lack of traceability and monitoring of blood donors and transfused patients constitute a barrier to the most basic rules of haemovigilance and overall good transfusion practices. This study draws up an inventory of knowledge, attitudes and clinical practice of blood prescribers in Niamey. A questionnaire was administered to 180 prescribers of blood products in Niamey in 2011. Questions were related to basic informations on blood transfusion and clinical use of blood. Analyses were performed using SAS 9.3 version. The sample consisted of 180 respondents from several professional categories: 51 physicians (28.33%), 10 medical students (5.56%), 84 nurses (46.67%), 15 anaesthesiologist assistant (8.33%) and 20 midwives (11.11%). Among these, 22.2% received training in blood transfusion safety. Half of the respondents (50.8%) got between 50 and 75% of correct answers, 45.8% got less than 50% correct while 3.35% scored more than 75% correct answers. The overall quality of responses was higher among physicians compared to other prescribers (Ptransfusion safety (Ptransfusion practices is necessary for prescribers of blood products. Accompanying measures to improve transfusion practice must be considered or strengthened through assessments, knowledge update/upgrade (regular, ongoing training) and establishment of active and motivated hospital transfusion committees. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  6. Production of a monoenergetic electron bunch in a self-injected laser-wakefield accelerator

    International Nuclear Information System (INIS)

    Chang, C.-L.; Hsieh, C.-T.; Ho, Y.-C.; Chen, Y.-S.; Lin, J.-Y.; Wang, J.; Chen, S.-Y.

    2007-01-01

    Production of a monoenergetic electron bunch in a self-injected laser-wakefield accelerator is investigated with a tomographic method which resolves the electron injection and acceleration processes. It is found that all the electrons in the monoenergetic electron bunch are injected at the same location in the plasma column and then accelerated with an acceleration gradient exceeding 2 GeV/cm. The injection position shifts with the position of pump-pulse focus, and no significant deceleration is observed for the monoenergetic electron bunch after it reaches the maximum energy. The results are consistent with the model of transverse wave breaking and beam loading for the injection of monoenergetic electrons. The tomographic method adds a crucial dimension to the whole array of existing diagnostics for laser beams, plasma waves, and electron beams. With this method the details of the underlying physical processes in laser-plasma interactions can be resolved and compared directly to particle-in-cell simulations

  7. Science Teachers Sharing Artifacts from Practice like Students’ Tablet Productions

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund

    Research looking into the spreading of practices supporting students’ high-level use of ICT for multimedia productions etc. is discussed together with research emphasizing core features of effective professional development for teachers (TPD), as high quality TPD is claimed to be a crucial factor......, are discussed. A case of a teacher’s first experiences from facilitating her students’ productions with the tablet application Explain Everything are used to discuss both the students’ and the teachers’ meaning making, and spreading to more cautious colleagues....

  8. Sound production treatment for acquired apraxia of speech: Effects of blocked and random practice on multisyllabic word production.

    Science.gov (United States)

    Wambaugh, Julie; Nessler, Christina; Wright, Sandra; Mauszycki, Shannon; DeLong, Catharine

    2016-10-01

    This study was designed to examine the effects of practice schedule, blocked vs random, on outcomes of a behavioural treatment for acquired apraxia of speech (AOS), Sound Production Treatment (SPT). SPT was administered to four speakers with chronic AOS and aphasia in the context of multiple baseline designs across behaviours and participants. Treatment was applied to multiple sound errors within three-to-five syllable words. All participants received both practice schedules: SPT-Random (SPT-R) and SPT-Blocked (SPT-B). Improvements in accuracy of word production for trained items were found for both treatment conditions for all participants. One participant demonstrated better maintenance effects associated with SPT-R. Response generalisation to untreated words varied across participants, but was generally modest and unstable. Stimulus generalisation to production of words in sentence completion was positive for three of the participants. Stimulus generalisation to production of phrases was positive for two of the participants. Findings provide additional efficacy data regarding SPT's effects on articulation of treated items and extend knowledge of the treatment's effects when applied to multiple targets within multisyllabic words.

  9. Measures for Administration of the Import of Mechanical and Electronic Products

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The Measures for the Administration of the Import of Mechanical and Electronic Products co-formulated by the Ministry of Commerce,the General Administration of Customs and the General Administration of Quality Supervision,Inspection and Quarantine,was hereby promul-gated,which entered into force as of May 1,2008.

  10. Radiosterilization of Medical Products and Recommended Code of Practice. Proceedings of a Symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-09-15

    Proceedings of a Symposium organized by the IAEA and held in Budapest, 5-9 June 1967, together with the IAEA recommended 'Code of Practice for Radiosterilization of Medical Products' resulting from a panel meeting held in Vienna, December 1966, and considered at the Symposium. The meeting was attended by 160 participants from 25 Member States and 3 international organizations. The commercial use of ionizing radiation for sterilizing medical supplies extends back to the early 1960s. The ability of the process to sterilize products made of materials such as plastics, which are destroyed by traditional sterilization procedures, has promoted much new thinking in product design. Most important is the ability of the radiation to sterilize items finally sealed and packed for dispatch, eliminating risk of recontamination. Some new fields of research are discussed in the Proceedings. The Code of Practice, drawn up by experts at several meetings, is aimed at producing uniform, safe procedures throughout the world, facilitating international trade in radiosterilized products. Contents: Introductory lecture; Radiosterilization of pharmaceuticals and bioproducts (12 papers); Radiosterilization of biological tissues (6 papers); Vaccine production by ionizing radiation (5 papers); Radiosterilization of medical devices and supplies (4 papers); Radiosensitivity of micro-organisms and microbiological testing (4 papers); Technical and economic aspects of radiosterilization (6 papers); Code of practice for radiosterilization (full code and 1 review paper). The Code of Practice is in English. Each paper is in its original language (29 English, 5 French, 4 Russian and 1 Spanish) and is preceded by an abstract in English with one in the original language if this is not English. Discussions are in English. (author)

  11. Radiosterilization of Medical Products and Recommended Code of Practice. Proceedings of a Symposium

    International Nuclear Information System (INIS)

    1967-01-01

    Proceedings of a Symposium organized by the IAEA and held in Budapest, 5-9 June 1967, together with the IAEA recommended 'Code of Practice for Radiosterilization of Medical Products' resulting from a panel meeting held in Vienna, December 1966, and considered at the Symposium. The meeting was attended by 160 participants from 25 Member States and 3 international organizations. The commercial use of ionizing radiation for sterilizing medical supplies extends back to the early 1960s. The ability of the process to sterilize products made of materials such as plastics, which are destroyed by traditional sterilization procedures, has promoted much new thinking in product design. Most important is the ability of the radiation to sterilize items finally sealed and packed for dispatch, eliminating risk of recontamination. Some new fields of research are discussed in the Proceedings. The Code of Practice, drawn up by experts at several meetings, is aimed at producing uniform, safe procedures throughout the world, facilitating international trade in radiosterilized products. Contents: Introductory lecture; Radiosterilization of pharmaceuticals and bioproducts (12 papers); Radiosterilization of biological tissues (6 papers); Vaccine production by ionizing radiation (5 papers); Radiosterilization of medical devices and supplies (4 papers); Radiosensitivity of micro-organisms and microbiological testing (4 papers); Technical and economic aspects of radiosterilization (6 papers); Code of practice for radiosterilization (full code and 1 review paper). The Code of Practice is in English. Each paper is in its original language (29 English, 5 French, 4 Russian and 1 Spanish) and is preceded by an abstract in English with one in the original language if this is not English. Discussions are in English. (author)

  12. Electron beam production and characterization for the PLEIADES Thomson X-ray source

    International Nuclear Information System (INIS)

    Brown, W.J.; Hartemann, F.V.; Tremaine, A.M.; Springer, P.T.; Le Sage, G.P.; Barty, C.P.J.; Crane, J.K.; Cross, R.R.; Fittinghoff, D.N.; Slaughter, D.R.; Rosenzweig, J.B.; Anderson, S.; Gibson, D.J.

    2002-01-01

    We report on the performance of an S-band RF photocathode electron gun and accelerator for operation with the PLEIADES Thomson x-ray source at LLNL. Simulations of beam production, transport, and focus are presented. It is shown that a 1 ps, 500 pC electron bunch with a normalized emittance of less than 5 πmm-mrad can be delivered to the interaction point. Initial electron measurements are presented. Calculations of expected x-ray flux are also performed, demonstrating an expected peak spectral brightness of 1020 photons/s/mm2/mrad2/0.1% bandwidth. Effects of RF phase jitter are also presented, and planned phase measurements and control methods are discussed

  13. Consumers' purchase of organic food products. A matter of convenience and reflexive practices.

    Science.gov (United States)

    Hjelmar, Ulf

    2011-04-01

    The aim of this study was to gain insight into the purchase of organic food products by consumers and to explore the main factors driving this process. This paper uses evidence from 16 in-depth interviews with consumers in Denmark carried out in 2008-2009. On the basis of the analysis two broad concepts are suggested: convenience behaviours and reflexive practices. Convenience behaviours are characteristic of pragmatic organic consumers. This type of shopping behaviour requires organic foods to be available in the local supermarket, they have to be clearly visible (preferably with an eco-label), and the price differential vis-à-vis conventional products have to be minimal. The analysis also showed that politically/ethically minded consumers have reflexive practices when purchasing organic food products: health considerations, ethical considerations (animal welfare), political considerations (environmentalism) and quality considerations (taste) play an important part for these consumers. Reflexive shopping practices can be sparked by life events (e.g. having children), "shocking" news about conventional food products and similar events, and news capable of creating a "cognitive dissonance" among consumers. The Danish case illustrates that the government needs to actively implement reforms and promote activities which make organic products a convenient choice for the pragmatic oriented consumer if their market share is to increase substantially. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. The good laboratory practice and good clinical practice requirements for the production of radiopharmaceuticals in clinical research

    NARCIS (Netherlands)

    De Vos, FJ; De Decker, M; Dierckx, RA

    Radiopharmaceuticals account for more than 95% of the group of sterile pharmaceutical products and should therefore be handled and produced with care. Since the introduction of the European directive, all pharmaceuticals used in clinical studies must be prepared under good manufacturing practice

  15. Trials by Juries: Suggested Practices for Database Trials

    Science.gov (United States)

    Ritterbush, Jon

    2012-01-01

    Librarians frequently utilize product trials to assess the content and usability of a database prior to committing funds to a new subscription or purchase. At the 2012 Electronic Resources and Libraries Conference in Austin, Texas, three librarians presented a panel discussion on their institutions' policies and practices regarding database…

  16. Heterogeneous semiconductor photocatalysts for hydrogen production from aqueous solutions of electron donors

    Science.gov (United States)

    Kozlova, E. A.; Parmon, V. N.

    2017-09-01

    Current views on heterogeneous photocatalysts for visible- and near-UV-light-driven production of molecular hydrogen from water and aqueous solutions of inorganic and organic electron donors are analyzed and summarized. Main types of such photocatalysts and methods for their preparation are considered. Particular attention is paid to semiconductor photocatalysts based on sulfides that are known to be sensitive to visible light. The known methods for increasing the quantum efficiency of the target process are discussed, including design of the structure, composition and texture of semiconductor photocatalysts and variation of the medium pH and the substrate and photocatalyst concentrations. Some important aspects of the activation and deactivation of sulfide photocatalysts and the evolution of their properties in the course of hydrogen production processes in the presence of various types of electron donors are analyzed. The bibliography includes 276 references.

  17. Evaluation of pig production practices, constraints and opportunities for improvement in smallholder production systems in Kenya.

    Science.gov (United States)

    Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

    2015-02-01

    This study evaluated pig production practices by smallholder farmers in two distinct production systems geared towards addressing their constraints and prospects for improvement. The production systems evaluated were semi-intensive and extensive and differed in remoteness, market access, resource availability and pig production intensity. Data were collected using structured questionnaires where a total of 102 pig farmers were interviewed. Qualitative and quantitative research methods were employed to define the socioeconomic characteristics of the production systems, understanding the different roles that pigs play, marketing systems and constraints to production. In both systems, regular cash income and insurance against emergencies were ranked as the main reasons for rearing pigs. Marketing of pigs was mainly driven by the type of production operation. Finances, feeds and housing were identified as the major constraints to production. The study provides important parameters and identifies constraints important for consideration in design of sustainable production improvement strategies. Feeding challenges can be improved through understanding the composition and proper utilization of local feed resources. Provision of adequate housing would improve the stocking rates and control mating.

  18. The role of production and teamwork practices in construction safety: a cognitive model and an empirical case study.

    Science.gov (United States)

    Mitropoulos, Panagiotis Takis; Cupido, Gerardo

    2009-01-01

    In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents. The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)--that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company. The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring. The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities. The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction

  19. TPM orients enterprises towards production excellence : A Practical Analysis of OEE

    OpenAIRE

    Zhu, Jiajia; Liu, Yong

    2009-01-01

    Purpose – The purpose of this paper is to review the literatures on Total Productive Maintenance (TPM) and to present an overview of TPM implementation practices initiated in a ‘connecter’ manufacturer in China. It also examines the need to develop, practice and implement such maintenance campaign, which not only reduce unscheduled and scheduled failures in process but also decrease operation and maintenance costs. Design/methodology/approach – A case-based approach in combination with scient...

  20. Best practices for International eSourcing of Software Products and Services

    OpenAIRE

    Käkölä, Timo

    2008-01-01

    This paper analyzes how the information and communications technology-supported international eSourcing of software products and services (IeS) can be effectively executed. The extant literature falls short of providing a systematic and detailed enough set of best practices to guide IeS. This paper presents best practices for IeS to facilitate further research, and to help managers and other stakeholders to understand, execute, and proactively improve and manage international eSourcing. The p...

  1. On the usage of electron beam as a tool to produce radioactive isotopes in photonuclear reactions

    International Nuclear Information System (INIS)

    Bunatyan, G.G.; Nikolenko, V.G.; Popov, A.B.

    2009-01-01

    We treat the Bremsstrahlung, induced by initial electron beam in converter, and the production of a desirable radioisotope due to the photonuclear reaction caused by this Bremsstrahlung. By way of illustration, the yield of a number of some, the most applicable in practice, radioisotopes is evaluated. The acquired findings persuade us that usage of modern electron accelerators offers a practicable way to produce the radioisotopes needful nowadays for various valuable applications in the nuclear medicine

  2. Practices for Reducing Greenhouse Gas Emissions from Rice Production in Northeast Thailand

    Directory of Open Access Journals (Sweden)

    Noppol Arunrat

    2017-01-01

    Full Text Available Land management practices for rice productivity and carbon storage have been a key focus of research leading to opportunities for substantial greenhouse gas (GHG mitigation. The effects of land management practices on global warming potential (GWP and greenhouse gas intensity (GHGI from rice production within the farm gate were investigated. For the 13 study sites, soil samples were collected by the Land Development Department in 2004. In 2014, at these same sites, soil samples were collected again to estimate the soil organic carbon sequestration rate (SOCSR from 2004 to 2014. Surveys were conducted at each sampling site to record the rice yield and management practices. The carbon dioxide (CO2, methane (CH4, and nitrous oxide (N2O emissions, Net GWP, and GHGI associated with the management practices were calculated. Mean rice yield and SOCSR were 3307 kg·ha−1·year−1 and 1173 kg·C·ha−1·year−1, respectively. The net GWP varied across sites, from 819 to 5170 kg·CO2eq·ha−1·year−1, with an average value of 3090 kg·CO2eq·ha−1·year−1. GHGI ranged from 0.31 to 1.68 kg·CO2eq·kg−1 yield, with an average value of 0.97 kg·CO2eq·kg−1 yield. Our findings revealed that the amount of potassium (potash, K2O fertilizer application rate is the most significant factor explaining rice yield and SOCSR. The burning of rice residues in the field was the main factor determining GHGI in this area. An effective way to reduce GHG emissions and contribute to sustainable rice production for food security with low GHGI and high productivity is avoiding the burning of rice residues.

  3. Practical Significance of Basin Water Market Construction on Agricultural Production

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    On the basis of introducing the concept of water market and the water market research in cluding both domestic market and foreign market,the system design features of water market are analyzed.The features include the prior distribution of agricultural water right,the close construction of market structure,reasonable price of water obtaining right and water pollution-discharge right and scientific stipulation of total volume of water use and total volume of pollution drainage.The practical significances of basin water market construction on Chinese agricultural production are revealed,which clover safeguarding the safety of agricultural water;effectively alleviating agricultural drought;saving the agricultural production water and improving the quality of agricultural products.

  4. Beauty production in pp collisions at s=2.76 TeV measured via semi-electronic decays

    NARCIS (Netherlands)

    Abelev, B.; Adam, J.; Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agostinelli, A.; Agrawal, N.; Ahammed, Z.; Ahmad, N.; Ahmed, I.; Ahn, S. U.; Ahn, S. A.; Aimo, I.; Aiola, S.; Ajaz, M.; Akindinov, A.; Alam, S. N.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alici, A.; Alkin, A.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; Andrei, C.; Andronic, A.; Anguelov, V.; Anielski, J.; Anticic, T.; Antinori, F.; Antonioli, P.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Armesto, N.; Arnaldi, R.; Aronsson, T.; Arsene, I. C.; Arslandok, M.; Augustinus, A.; Averbeck, R.; Awes, T. C.; Azmi, M. D.; Bach, M.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Baltasar Dos Santos Pedrosa, F.; Baral, R. C.; Barbera, R.; Barile, F.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartke, J.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Baumann, C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bellwied, R.; Belmont-Moreno, E.; Belmont, R.; Belyaev, V.; Bencedi, G.; Beole, S.; Berceanu, I.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Berger, M. E.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielcík, J.; Bielcíková, J.; Bilandzic, A.; Bjelogrlic, S.; Blanco, F.; Blau, D.; Blume, C.; Bock, F.; Bogdanov, A.; Bøggild, H.; Bogolyubsky, M.; Böhmer, F. V.; Boldizsár, L.; Bombara, M.; Book, J.; Borel, H.; Borissov, A.; Bossú, F.; Botje, M.; Botta, E.; Böttger, S.; Braun-Munzinger, P.; Bregant, M.; Breitner, T.; Broker, T. A.; Browning, T. A.; Broz, M.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buncic, P.; Busch, O.; Buthelezi, Z.; Caffarri, D.; Cai, X.; Caines, H.; Calero Diaz, L.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Carena, F.; Carena, W.; Castillo Castellanos, J.; Casula, E. A R; Catanescu, V.; Cavicchioli, C.; Ceballos Sanchez, C.; Cepila, J.; Cerello, P.; Chang, B.; Chapeland, S.; Charvet, J. L.; Chattopadhyay, S.; Chattopadhyay, S.; Chelnokov, V.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Chochula, P.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortese, P.; Cortés Maldonado, I.; Cosentino, M. R.; Costa, F.; Crochet, P.; Cruz Albino, R.; Cuautle, E.; Cunqueiro, L.; Dainese, A.; Dang, R.; Danu, A.; Das, D.; Das, I.; Das, K.; Das, S.; Dash, A.; Dash, S.; De, S.; Delagrange, H.; Deloff, A.; Dénes, E.; D'Erasmo, G.; De Caro, A.; de Cataldo, G.; de Cuveland, J.; De Falco, A.; De Gruttola, D.; De Marco, N.; De Pasquale, S.; de Rooij, R.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Di Bari, D.; Di Liberto, S.; Di Mauro, A.; Di Nezza, P.; Djuvsland, O.; Dobrin, A.; Dobrowolski, T.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Dørheim, S.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Dupieux, P.; Dutta Majumdar, A. K.; Hilden, T. E.; Ehlers, R. J.; Elia, D.; Engel, H.; Erazmus, B.; Erdal, H. A.; Eschweiler, D.; Espagnon, B.; Esposito, M.; Estienne, M.; Esumi, S.; Evans, D.; Evdokimov, S.; Fabris, D.; Faivre, J.; Falchieri, D.; Fantoni, A.; Fasel, M.; Fehlker, D.; Feldkamp, L.; Felea, D.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Figiel, J.; Figueredo, M. A S; Filchagin, S.; Finogeev, D.; Fionda, F. M.; Fiore, E. M.; Floratos, E.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Frankenfeld, U.; Fuchs, U.; Furget, C.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gallio, M.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Gargiulo, C.; Garishvili, I.; Gerhard, J.; Germain, M.; Gheata, A.; Gheata, M.; Ghidini, B.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Gladysz-Dziadus, E.; Glässel, P.; Gomez Ramirez, A.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Graczykowski, L. K.; Grelli, A.; Grigoras, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grinyov, B.; Grion, N.; Grosse-Oetringhaus, J. F.; Grossiord, J. Y.; Grosso, R.; Guber, F.; Guernane, R.; Guerzoni, B.; Guilbaud, M.; Gulbrandsen, K.; Gulkanyan, H.; Gumbo, M.; Gunji, T.; Gupta, A.; Gupta, R.; Khan, K. H.; Haake, R.; Haaland, O.; Hadjidakis, C.; Haiduc, M.; Hamagaki, H.; Hamar, G.; Hanratty, L. D.; Hansen, A.; Harris, J. W.; Hartmann, H.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Heide, M.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Hess, B. A.; Hetland, K. F.; Hippolyte, B.; Hladky, J.; Hristov, P.; Huang, M.; Humanic, T. J.; Hussain, N.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Ilkiv, I.; Inaba, M.; Innocenti, G. M.; Ionita, C.; Ippolitov, M.; Irfan, M.; Ivanov, M.; Ivanov, V.; Jacholkowski, A.; Jacobs, P. M.; Jahnke, C.; Jang, H. J.; Janik, M. A.; Jayarathna, P. H S Y; Jena, C.; Jena, S.; Jimenez Bustamante, R. T.; Jones, P. G.; Jung, H.; Jusko, A.; Kadyshevskiy, V.; Kalcher, S.; Kalinak, P.; Kalweit, A.; Kamin, J.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L D; Khan, M. M.; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Kileng, B.; Kim, B.; Kim, D. W.; Kim, D. J.; Kim, J. S.; Kim, M.; Kim, M.; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, J.; Klein-Bösing, C.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobdaj, C.; Kofarago, M.; Köhler, M. K.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Konevskikh, A.; Kovalenko, V.; Kowalski, M.; Kox, S.; Koyithatta Meethaleveedu, G.; Kral, J.; Králik, I.; Kravcáková, A.; Krelina, M.; Kretz, M.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kucera, V.; Kucheriaev, Y.; Kugathasan, T.; Kuhn, C.; Kuijer, P. G.; Kulakov, I.; Kumar, J.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kushpil, S.; Kweon, M. J.; Kwon, Y.; Ladron de Guevara, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lara, C.; Lardeux, A.; Lattuca, A.; La Pointe, S. L.; La Rocca, P.; Lea, R.; Leardini, L.; Lee, G. R.; Legrand, I.; Lehnert, J.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; Leoncino, M.; León Monzón, I.; Lévai, P.; Li, S.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Ljunggren, H. M.; Lodato, D. F.; Loenne, P. I.; Loggins, V. R.; Loginov, V.; Lohner, D.; Loizides, C.; Lopez, X.; López Torres, E.; Lu, X. G.; Luettig, P.; Lunardon, M.; Luparello, G.; Ma, R.; Maevskaya, A.; Mager, M.; Mahapatra, D. P.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manceau, L.; Manko, V.; Manso, F.; Manzari, V.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Marín, A.; Markert, C.; Marquard, M.; Martashvili, I.; Martin, N. A.; Martinengo, P.; Martínez, M. I.; Martínez García, G.; Martin Blanco, J.; Martynov, Y.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Massacrier, L.; Mastroserio, A.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzoni, M. A.; Meddi, F.; Menchaca-Rocha, A.; Mercado Pérez, J.; Meres, M.; Miake, Y.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Mischke, A.; Mishra, A. N.; Miskowiec, D.; Mitra, J.; Mitu, C. M.; Mlynarz, J.; Mohammadi, N.; Mohanty, B.; Molnar, L.; Montaño Zetina, L.; Montes, E.; Morando, M.; Moreira De Godoy, D. A.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Müller, H.; Munhoz, M. G.; Murray, S.; Musa, L.; Musinsky, J.; Nandi, B. K.; Nania, R.; Nappi, E.; Nattrass, C.; Nayak, K.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Nicassio, M.; Niculescu, M.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Nilsen, B. S.; Noferini, F.; Nomokonov, P.; Nooren, G.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Oh, S. K.; Okatan, A.; Olah, L.; Oleniacz, J.; Oliveira Da Silva, A. C.; Onderwaater, J.; Oppedisano, C.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Sahoo, P.; Pachmayer, Y.; Pachr, M.; Pagano, P.; Paic, G.; Painke, F.; Pajares, C.; Pal, S. K.; Palmeri, A.; Pant, D.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, W. J.; Parmar, S.; Passfeld, A.; Patalakha, D. I.; Paticchio, V.; Paul, B.; Pawlak, T.; Peitzmann, T.; Pereira Da Costa, H.; Pereira De Oliveira Filho, E.; Peresunko, D.; Pérez Lara, C. E.; Pesci, A.; Peskov, V.; Pestov, Y.; Petrácek, V.; Petran, M.; Petris, M.; Petrovici, M.; Petta, C.; Piano, S.; Pikna, M.; Pillot, P.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Ploskon, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L M; Poghosyan, M. G.; Pohjoisaho, E. H O; Polichtchouk, B.; Poljak, N.; Pop, A.; Porteboeuf-Houssais, S.; Porter, J.; Potukuchi, B.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Rauf, A. W.; Razazi, V.; Read, K. F.; Real, J. S.; Redlich, K.; Reed, R. J.; Rehman, A.; Reichelt, P.; Reicher, M.; Reidt, F.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Rettig, F.; Revol, J. P.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Rivetti, A.; Rocco, E.; Rodríguez Cahuantzi, M.; Rodriguez Manso, A.; Røed, K.; Rogochaya, E.; Rohni, S.; Rohr, D.; Röhrich, D.; Romita, R.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Sadovsky, S.; Šafarík, K.; Sahlmuller, B.; Sahoo, R.; Sahu, P. K.; Saini, J.; Sakai, S.; Salgado, C. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Sanchez Castro, X.; Sánchez Rodríguez, F. J.; Šándor, L.; Sandoval, A.; Sano, M.; Santagati, G.; Sarkar, D.; Scapparone, E.; Scarlassara, F.; Scharenberg, R. P.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schuchmann, S.; Schukraft, J.; Schulc, M.; Schuster, T.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Segato, G.; Seger, J. E.; Sekiguchi, Y.; Selyuzhenkov, I.; Seo, J.; Serradilla, E.; Sevcenco, A.; Shabetai, A.; Shabratova, G.; Shahoyan, R.; Shangaraev, A.; Sharma, N.; Sharma, S.; Shigaki, K.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Singaraju, R.; Singh, R.; Singha, S.; Singhal, V.; Sinha, B. C.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Skjerdal, K.; Slupecki, M.; Smirnov, N.; Snellings, R. J M; Søgaard, C.; Soltz, R.; Song, J.; Song, M.; Soramel, F.; Sorensen, S.; Spacek, M.; Spiriti, E.; Sputowska, I.; Spyropoulou-Stassinaki, M.; Srivastava, B. K.; Stachel, J.; Stan, I.; Stefanek, G.; Steinpreis, M.; Stenlund, E.; Steyn, G.; Stiller, J. H.; Stocco, D.; Stolpovskiy, M.; Strmen, P.; Suaide, A. A P; Sugitate, T.; Suire, C.; Suleymanov, M.; Sultanov, R.; Šumbera, M.; Susa, T.; Symons, T. J M; Szabo, A.; Szanto de Toledo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Takahashi, J.; Tangaro, M. A.; Tapia Takaki, J. D.; Tarantola Peloni, A.; Tarazona Martinez, A.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terrevoli, C.; Thäder, J.; Thomas, D.; Tieulent, R.; Timmins, A. R.; Toia, A.; Trubnikov, V.; Trzaska, W. H.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Uras, A.; Usai, G. L.; Vajzer, M.; Vala, M.; Valencia Palomo, L.; Vallero, S.; Vande Vyvre, P.; Van Der Maarel, J.; Van Hoorne, J. W.; van Leeuwen, M.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vechernin, V.; Veldhoen, M.; Velure, A.; Venaruzzo, M.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Verweij, M.; Vickovic, L.; Viesti, G.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Vinogradov, A.; Vinogradov, L.; Vinogradov, Y.; Virgili, T.; Viyogi, Y. P.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Vranic, D.; Vrláková, J.; Vulpescu, B.; Vyushin, A.; Wagner, B.; Wagner, J.; Wagner, V.; Wang, M.; Wang, Y.; Watanabe, D.; Weber, M.; Wessels, J. P.; Westerhoff, U.; Wiechula, J.; Wikne, J.; Wilde, M.; Wilk, G.; Wilkinson, J.; Williams, M. C S; Windelband, B.; Winn, M.; Yaldo, C. G.; Yamaguchi, Y.; Yang, H.; Yang, P.; Yang, S.; Yano, S.; Yasnopolskiy, S.; Yi, J.; Yin, Z.; Yoo, I. K.; Yushmanov, I.; Zaccolo, V.; Zach, C.; Zaman, A.; Zampolli, C.; Zaporozhets, S.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zgura, I. S.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, F.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zhu, X.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zinovjev, G.; Zoccarato, Y.; Zyzak, M.

    2014-01-01

    The ALICE Collaboration at the LHC reports measurement of the inclusive production cross section of electrons from semi-leptonic decays of beauty hadrons with rapidity |y|<0.8 and transverse momentum 1Electrons not originating from semi-electronic decay

  5. Effect of electron irradiation on hatchability and broiler performance of hatching eggs

    International Nuclear Information System (INIS)

    Castaneda, S.M.P.; Tellez, I.G.; Sanchez, R.E.; Quintana, L.J.A.; Bustos, R.E.

    1996-01-01

    The irradiation of foods employs the electromagnetic ionizing energy, and the gamma ray, the X ray and the electrons are used. The electrons are reduced mass particles and have negative electric charge. The difference between the gamma rays, X-ray and electron is the penetration level. The effective range on penetration of electron accelerator depends on the energy level, in practice the penetation of an electron beam in the foods is 5 mm for MeV. The objectives of this work were to evaluate the effects of electron irradiation on the hatchability, and to evaluate the productive parameters of chicken hatching from egg irradiated with electrons. (author). 15 refs., 6 tabs

  6. The effect of flavin electron shuttles in microbial fuel cells current production

    Energy Technology Data Exchange (ETDEWEB)

    Velasquez-Orta, Sharon B. [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Civil Engineering and Geosciences; Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Chemical Engineering and Advanced Materials; Head, Ian M.; Curtis, Thomas P. [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Civil Engineering and Geosciences; Scott, Keith [Newcastle Univ., Newcastle upon Tyne (United Kingdom). School of Chemical Engineering and Advanced Materials; Lloyd, Jonathan R.; Canstein, Harald von [Manchester Univ. (United Kingdom). School of Earth, Atmospheric and Environmental Sciences

    2010-02-15

    The effect of electron shuttles on electron transfer to microbial fuel cell (MFC) anodes was studied in systems where direct contact with the anode was precluded. MFCs were inoculated with Shewanella cells, and flavins used as the electron shuttling compound. In MFCs with no added electron shuttles, flavin concentrations monitored in the MFCs' bulk liquid increased continuously with FMN as the predominant flavin. The maximum concentrations were 0.6 {mu}M for flavin mononucleotide and 0.2 {mu}M for riboflavin. In MFCs with added flavins, micro-molar concentrations were shown to increase current and power output. The peak current was at least four times higher in MFCs with high concentrations of flavins (4.5-5.5 {mu}M) than in MFCs with low concentrations (0.2-0.6 {mu}M). Although high power outputs (around 150 mW/m{sup 2}) were achieved in MFCs with high concentrations of flavins, a Clostridium-like bacterium along with other reactor limitations affected overall coulombic efficiencies (CE) obtained, achieving a maximum CE of 13%. Electron shuttle compounds (flavins) permitted bacteria to utilise a remote electron acceptor (anode) that was not accessible to the cells allowing current production until the electron donor (lactate) was consumed. (orig.)

  7. A spherical electron cloud hopping model for studying product branching ratios of dissociative recombination.

    Science.gov (United States)

    Yu, Hua-Gen

    2008-05-21

    A spherical electron cloud hopping (SECH) model is proposed to study the product branching ratios of dissociative recombination (DR) of polyatomic systems. In this model, the fast electron-captured process is treated as an instantaneous hopping of a cloud of uniform spherical fractional point charges onto a target M+q ion (or molecule). The sum of point charges (-1) simulates the incident electron. The sphere radius is determined by a critical distance (Rc eM) between the incoming electron (e-) and the target, at which the potential energy of the e(-)-M+q system is equal to that of the electron-captured molecule M+q(-1) in a symmetry-allowed electronic state with the same structure as M(+q). During the hopping procedure, the excess energies of electron association reaction are dispersed in the kinetic energies of M+q(-1) atoms to conserve total energy. The kinetic energies are adjusted by linearly adding atomic momenta in the direction of driving forces induced by the scattering electron. The nuclear dynamics of the resultant M+q(-1) molecule are studied by using a direct ab initio dynamics method on the adiabatic potential energy surface of M+q(-1), or together with extra adiabatic surface(s) of M+q(-1). For the latter case, the "fewest switches" surface hopping algorithm of Tully was adapted to deal with the nonadiabaticity in trajectory propagations. The SECH model has been applied to study the DR of both CH+ and H3O+(H2O)2. The theoretical results are consistent with the experiment. It was found that water molecules play an important role in determining the product branching ratios of the molecular cluster ion.

  8. Production of iodine-123 radiobiological specimen on 25 MeV electron beam

    International Nuclear Information System (INIS)

    Oganesyan, Yu.Ts.; Starodub, G.Ya.; Buklanov, G.V.; Korotkin, Yu.S.; Belov, A.G.

    1988-01-01

    The technique is described and experimental results are presented for production of radioactive specimen-iodine-123 for medical biological investigations. It is shown that in ten hour irradiation of 124 Xe enriched target of 10 g weight by the 25 MeV electron beam at MT-25 microtron short lived 123 I with activity of about 200 mCl can be accumulated. The procedure was developed for extraction of radioactive atoms and preparing the solution that permits to obtain during 1-1.5 h after the end of irradiation the specimen which satisfies all pharmacopeia requirements. It follows from the results that using small-size electron accelerators with the beam energy up to 25 MeV permits to organize economical and large-scale production of high quality radioactive specimen of 123 I for servicing a large region of this country. 14 refs.; 4 figs.; 1 tab

  9. Leachables and extractables handbook: safety evaluation, qualification, and best practices applied to inhalation drug products

    National Research Council Canada - National Science Library

    Ball, Douglas J

    2012-01-01

    ...). It discusses best practices for evaluation and management of leachables and extractables throughout the pharma product lifecycle by providing practical knowledge about how and why safety thresholds were developed...

  10. The lean product design and development journey a practical view

    CERN Document Server

    Pessôa, Marcus Vinicius Pereira

    2017-01-01

    This book presents a series of high performance product design (PD) and development best practices that can create or improve product development organization. In contrast to other books that focus only on Toyota or other individual companies applying lean IPD, this book explains the lean philosophy more broadly and includes discussions of systems engineering, design for X (DFX), agile development, integrated product development, and project management. The “Lean Journey” proposed here takes a value-centric approach, where the lean principles are applied to PD to allow the tools and methods selected to emerge from observation of the individual characteristics of each enterprise. This means that understanding lean product development (LPD) is not about knowing which tools are available but knowing how to apply the philosophy. The book comes with an accompanying manual with problems and solutions available on Springer Extras.

  11. Cleaner Production Practices, Environmental Management and National Policy Development in Malaysia for Electroplating Enterprises

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2004-01-01

    -operation for Environment and Development (DANCED), Ministry of Environment and Energy. SMEs were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen, presenting...... figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention towards...... sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project 'A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production'....

  12. Dada Redux: Elements of Dadaist Practice in Contemporary Electronic Literature

    Directory of Open Access Journals (Sweden)

    Scott Rettberg

    2008-01-01

    Full Text Available The Dada movement was a multimedia avant-garde art practice that began in Zurich during World War I and flourished in Berlin, Paris, and New York from 1916 until 1920. Beginning as a disgusted response to the war and the blithely nationalistic bourgeois attitudes the Dada felt were at the root of the conflict, the Dada developed and refined the notion of “anti-art” as an expression of dissatisfaction with the dominant contemporary ideology. Although the period in which Dada was an active organized cultural movement was quite short, its legacy is widespread and profound. Through readings of works of electronic literature, the essay argues that while techniques have been adapted to the media-specific affordances of the networked computer, many of the practices popularized by the Dada during the early twentieth century form the basis of methods utilized by new media artists and writers today. By comparing the art and activities of early Dadaist artists to the work of contemporary digital writers, the essay advocates a critical approach to new media writing that both accounts for the specific properties of literature produced for networked computer environments and also examines these artifacts within the contextualizing historical framework of the avant-garde.

  13. Institutional disposition and management of end-of-life electronics.

    Science.gov (United States)

    Babbitt, Callie W; Williams, Eric; Kahhat, Ramzy

    2011-06-15

    Institutions both public and private face a challenge to develop policies to manage purchase, use, and disposal of electronics. Environmental considerations play an increasing role in addition to traditional factors of cost, performance and security. Characterizing current disposition practices for end-of-life electronics is a key step in developing policies that prevent negative environmental and health impacts while maximizing potential for positive social and economic benefits though reuse. To provide a baseline, we develop the first characterization of quantity, value, disposition, and flows of end-of-life electronics at a major U.S. educational institution. Results of the empirical study indicate that most end-of-first-life electronics were resold through public auction to individuals and small companies who refurbish working equipment for resale or sell unusable products for reclamation of scrap metal. Desktop and laptop computers sold for refurbishing and resale averaged U.S. $20-100 per unit, with computers sold directly to individuals for reuse reaching $250-350 per unit. This detailed assessment was coupled with a benchmarking survey of end-of-life electronics management practices at other U.S. universities. Survey results indicate that while auctions are still commonplace, an increasing number of institutions are responding to environmental concerns by creating partnerships with local recycling and resale entities and mandating domestic recycling. We use the analyses of current disposition practices as input to discuss institutional strategies for managing electronics. One key issue is the tension between benefits of used equipment sales, in terms of income for the institution and increased reuse for society, and the environmental risks because of unknown downstream practices.

  14. Starting electronics

    CERN Document Server

    Brindley, Keith

    2005-01-01

    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

  15. Vaginal health and hygiene practices and product use in Canada: a national cross-sectional survey.

    Science.gov (United States)

    Crann, Sara E; Cunningham, Shannon; Albert, Arianne; Money, Deborah M; O'Doherty, Kieran C

    2018-03-23

    The vaginal microbiome influences quality of life and health. The composition of vaginal microbiota can be affected by various health behaviors, such as vaginal douching. The purpose of this study was to examine the types and prevalence of diverse vaginal/genital health and hygiene behaviors among participants living in Canada and to examine associations between behavioral practices and adverse gynecological health conditions. An anonymous online survey, available in English and French, was distributed across Canada. The sample consisted of 1435 respondents, 18 years or older, living in Canada. Respondents reported engaging in diverse vaginal/genital health and hygiene behavioral practices, including the use of commercially manufactured products and homemade and naturopathic products and practices. Over 95% of respondents reported using at least one product in or around the vaginal area. Common products and practices included vaginal/genital moisturizers, anti-itch creams, feminine wipes, washes, suppositories, sprays, powders, and waxing and shaving pubic hair. The majority of the sample (80%) reported experiencing one or more adverse vaginal/genital symptom in their lifetime. Participants who had used any vaginal/genital product(s) had approximately three times higher odds of reporting an adverse health condition. Several notable associations between specific vaginal/genital health and hygiene products and adverse health conditions were identified. This study is the first of its kind to identify the range and prevalence of vaginal/genital health and hygiene behaviors in Canada. Despite a lack of credible information about the impact of these behaviors on women's health, the use of commercially manufactured and homemade products for vaginal/genital health and hygiene is common. Future research can extend the current exploratory study by identifying causal relationships between vaginal/genital health and hygiene behaviors and changes to the vaginal microbiome.

  16. 77 FR 5275 - Used Electronic Products: An Examination of U.S. Exports; Institution of Investigation and...

    Science.gov (United States)

    2012-02-02

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 332-528] Used Electronic Products: An... itself, and (4) disposed of by the exporter itself; and The factors affecting trade in used electronic... International Trade Commission. ACTION: Institution of investigation and scheduling of public hearing. SUMMARY...

  17. Electron beam irradiation of poly(perfluoro ethers): Identification of gaseous products as a result of main chain scission

    International Nuclear Information System (INIS)

    Pacansky, J.; Waltman, R.J.

    1991-01-01

    Several poly(perfluoro ethers) are exposed to electron beams to study the mechanism for main chain scission. Electron beam exposures were performed with the viscous poly(perfluoro ethers) under argon gas, and also at 9 K under vacuum, to determine mechanistic details for the chemical degradation. Here the authors report that, after main chain scission of the bulk poly(perfluoro ethers), sample weight loss is observed concomitant with evolution of gaseous products. Since this suggests that some unzipping of the polymer chain occurs, the products were identified and, most importantly, the efficiency for their formation was determined in terms of G values, and compared to known G values for main chain scission. The results show that COF 2 is the major gaseous product produced from unbranched ethers while CF 4 and COF 2 are the major products from branched polymers. The gaseous products were also exposed to the high-energy electron beam and the G values for decomposition are given

  18. Particle size distribution of selected electronic nicotine delivery system products.

    Science.gov (United States)

    Oldham, Michael J; Zhang, Jingjie; Rusyniak, Mark J; Kane, David B; Gardner, William P

    2018-03-01

    Dosimetry models can be used to predict the dose of inhaled material, but they require several parameters including particle size distribution. The reported particle size distributions for aerosols from electronic nicotine delivery system (ENDS) products vary widely and don't always identify a specific product. A low-flow cascade impactor was used to determine the particle size distribution [mass median aerodynamic diameter (MMAD); geometric standard deviation (GSD)] from 20 different cartridge based ENDS products. To assess losses and vapor phase amount, collection efficiency of the system was measured by comparing the collected mass in the impactor to the difference in ENDS product mass. The levels of nicotine, glycerin, propylene glycol, water, and menthol in the formulations of each product were also measured. Regardless of the ENDS product formulation, the MMAD of all tested products was similar and ranged from 0.9 to 1.2 μm with a GSD ranging from 1.7 to 2.2. There was no consistent pattern of change in the MMAD and GSD as a function of number of puffs (cartridge life). The collection efficiency indicated that 9%-26% of the generated mass was deposited in the collection system or was in the vapor phase. The particle size distribution data are suitable for use in aerosol dosimetry programs. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. Legal Deposit of Electronic Publications

    Directory of Open Access Journals (Sweden)

    Burcu Umut Zan

    2009-06-01

    Full Text Available The most important and basic role of the deposition studies, which are the greatest contributions to the knowledge sharing, is to gather the artistic and philosophical works of a country and provide them for the use of future researchers. However, since early deposition studies were limited with printed publications, they do not involve the electronic publication types appearing with the development of information technology. This stems from the fact that the electronic publications require procedures different from those of the printed publications in terms of deposition steps because of their structures. Today, in order to guarantee that all registered cultural products, which are mostly produced and used in the electronic environment could be fully collected, electronic publications should also be covered by and regulated under legal deposit. This study analyzes the deposition of electronic publications, within the framework of their storage and protection, being put in the use of the users as well as the common approaches to deposition practices in the world parallel to the developments in the information technology. The related situation in Turkey was also evaluated.

  20. Balancing Environmental Performance with Sales Functionalities in Packaging for Consumer Electronic Products

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2006-01-01

    Two major changes are currently taking place in the world of Consumer Electronics. They are, first, the relocation of production to low-wage countries, in particularly China. This results in longer distribution distances, which lead to a higher relative importance of this phase in the entire life

  1. 78 FR 27303 - Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron...

    Science.gov (United States)

    2013-05-10

    ...-0178] Irradiation in the Production, Processing, and Handling of Animal Feed and Pet Food; Electron... electron beam and x-ray sources for irradiation of poultry feed and poultry feed ingredients. This action... CFR part 579) to provide for the safe use of electron beam and x-ray sources for irradiation of...

  2. Communication: practical and rigorous reduction of the many-electron quantum mechanical Coulomb problem to O(N(2/3)) storage.

    Science.gov (United States)

    Pederson, Mark R

    2015-04-14

    It is tacitly accepted that, for practical basis sets consisting of N functions, solution of the two-electron Coulomb problem in quantum mechanics requires storage of O(N(4)) integrals in the small N limit. For localized functions, in the large N limit, or for planewaves, due to closure, the storage can be reduced to O(N(2)) integrals. Here, it is shown that the storage can be further reduced to O(N(2/3)) for separable basis functions. A practical algorithm, that uses standard one-dimensional Gaussian-quadrature sums, is demonstrated. The resulting algorithm allows for the simultaneous storage, or fast reconstruction, of any two-electron Coulomb integral required for a many-electron calculation on processors with limited memory and disk space. For example, for calculations involving a basis of 9171 planewaves, the memory required to effectively store all Coulomb integrals decreases from 2.8 Gbytes to less than 2.4 Mbytes.

  3. Reactive Oxygen Species Production by Forward and Reverse Electron Fluxes in the Mitochondrial Respiratory Chain

    Science.gov (United States)

    Selivanov, Vitaly A.; Votyakova, Tatyana V.; Pivtoraiko, Violetta N.; Zeak, Jennifer; Sukhomlin, Tatiana; Trucco, Massimo; Roca, Josep; Cascante, Marta

    2011-01-01

    Reactive oxygen species (ROS) produced in the mitochondrial respiratory chain (RC) are primary signals that modulate cellular adaptation to environment, and are also destructive factors that damage cells under the conditions of hypoxia/reoxygenation relevant for various systemic diseases or transplantation. The important role of ROS in cell survival requires detailed investigation of mechanism and determinants of ROS production. To perform such an investigation we extended our rule-based model of complex III in order to account for electron transport in the whole RC coupled to proton translocation, transmembrane electrochemical potential generation, TCA cycle reactions, and substrate transport to mitochondria. It fits respiratory electron fluxes measured in rat brain mitochondria fueled by succinate or pyruvate and malate, and the dynamics of NAD+ reduction by reverse electron transport from succinate through complex I. The fitting of measured characteristics gave an insight into the mechanism of underlying processes governing the formation of free radicals that can transfer an unpaired electron to oxygen-producing superoxide and thus can initiate the generation of ROS. Our analysis revealed an association of ROS production with levels of specific radicals of individual electron transporters and their combinations in species of complexes I and III. It was found that the phenomenon of bistability, revealed previously as a property of complex III, remains valid for the whole RC. The conditions for switching to a state with a high content of free radicals in complex III were predicted based on theoretical analysis and were confirmed experimentally. These findings provide a new insight into the mechanisms of ROS production in RC. PMID:21483483

  4. Recent advances in carbon nanotube-based electronics

    International Nuclear Information System (INIS)

    Sharma, Prithu; Ahuja, Prerit

    2008-01-01

    CNT-electronics is a field involving synthesis of carbon nanotubes-based novel electronic circuits, comparable to the size of molecules, the practically fundamental size possible. It has brought a new paradigm in science as it has enabled scientists to increase the device integration density tremendously, hence achieving better efficiency and speed. Here we review the state-of-art current research on the applications of CNTs in electronics and present recent results outlining their potential along with illustrating some current concerns in the research field. Unconventional projects such as CNT-based biological sensors, transistors, field emitters, integrated circuits, etc. are taking CNT-based electronics to its extremes. The field holds a promise for mass production of high speed and efficient electronic devices. However, the chemical complexity, reproducibility and other factors make the field a challenging one, which need to be addressed before the field realizes its true potential

  5. SU-F-T-71: A Practical Method for Evaluation of Electron Virtual Source Position

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Z; Jiang, W; Stuart, B; Leu, S; Feng, Y [East Carolina University, Greenville, North Carolina (United States); Liu, T [Houston Methodist Hospital, Sugar Land, TX (United States)

    2016-06-15

    Purpose: Since electrons are easily scattered, the virtual source position for electrons is expected to locate below the x-ray target of Medical Linacs. However, the effective SSD method yields the electron virtual position above the x-ray target for some applicators for some energy in Siemens Linacs. In this study, we propose to use IC Profiler (Sun Nuclear) for evaluating the electron virtual source position for the standard electron applicators for various electron energies. Methods: The profile measurements for various nominal source-to-detector distances (SDDs) of 100–115 cm were carried out for electron beam energies of 6–18 MeV. Two methods were used: one was to use a 0.125 cc ion chamber (PTW, Type 31010) with buildup mounted in a PTW water tank without water filled; and the other was to use IC Profiler with a buildup to achieve charge particle equilibrium. The full width at half-maximum (FWHM) method was used to determine the field sizes for the measured profiles. Backprojecting (by a straight line) the distance between the 50% points on the beam profiles for the various SDDs, yielded the virtual source position for each applicator. Results: The profiles were obtained and the field sizes were determined by FWHM. The virtual source positions were determined through backprojection of profiles for applicators (5, 10, 15, 20, 25). For instance, they were 96.415 cm (IC Profiler) vs 95.844 cm (scanning ion chamber) for 9 MeV electrons with 10×10 cm applicator and 97.160 cm vs 97.161 cm for 12 MeV electrons with 10×10 cm applicator. The differences in the virtual source positions between IC profiler and scanning ion chamber were within 1.5%. Conclusion: IC Profiler provides a practical method for determining the electron virtual source position and its results are consistent with those obtained by profiles of scanning ion chamber with buildup.

  6. SU-F-T-71: A Practical Method for Evaluation of Electron Virtual Source Position

    International Nuclear Information System (INIS)

    Huang, Z; Jiang, W; Stuart, B; Leu, S; Feng, Y; Liu, T

    2016-01-01

    Purpose: Since electrons are easily scattered, the virtual source position for electrons is expected to locate below the x-ray target of Medical Linacs. However, the effective SSD method yields the electron virtual position above the x-ray target for some applicators for some energy in Siemens Linacs. In this study, we propose to use IC Profiler (Sun Nuclear) for evaluating the electron virtual source position for the standard electron applicators for various electron energies. Methods: The profile measurements for various nominal source-to-detector distances (SDDs) of 100–115 cm were carried out for electron beam energies of 6–18 MeV. Two methods were used: one was to use a 0.125 cc ion chamber (PTW, Type 31010) with buildup mounted in a PTW water tank without water filled; and the other was to use IC Profiler with a buildup to achieve charge particle equilibrium. The full width at half-maximum (FWHM) method was used to determine the field sizes for the measured profiles. Backprojecting (by a straight line) the distance between the 50% points on the beam profiles for the various SDDs, yielded the virtual source position for each applicator. Results: The profiles were obtained and the field sizes were determined by FWHM. The virtual source positions were determined through backprojection of profiles for applicators (5, 10, 15, 20, 25). For instance, they were 96.415 cm (IC Profiler) vs 95.844 cm (scanning ion chamber) for 9 MeV electrons with 10×10 cm applicator and 97.160 cm vs 97.161 cm for 12 MeV electrons with 10×10 cm applicator. The differences in the virtual source positions between IC profiler and scanning ion chamber were within 1.5%. Conclusion: IC Profiler provides a practical method for determining the electron virtual source position and its results are consistent with those obtained by profiles of scanning ion chamber with buildup.

  7. Inclusive production of electrons and muons in multihadronic events at PETRA

    International Nuclear Information System (INIS)

    D'Agostini, G.; Apel, W.D.; Engler, J.; Fluegge, G.; Fries, D.C.; Fues, W.; Gamerdinger, K.; Hopp, G.; Kuester, H.; Mueller, H.; Randoll, H.; Schmidt, G.; Schneider, H.; De Boer, W.; Buschhorn, G.; Grindhammer, G.; Grosse-Wiesmann, P.; Gunderson, B.; Kiesling, C.; Kotthaus, R.; Kruse, U.; Lierl, H.; Lueers, D.; Oberlack, H.; Schacht, P.; Colas, P.; Cordier, A.; Davier, M.; Fournier, D.; Grivaz, J.F.; Haissinski, J.; Journe, V.; Laplanche, F.; Mallik, U.; Veillet, J.J.; Behrend, H.J.; Fenner, H.; Schachter, M.J.; Schroeder, V.; Sindt, H.

    1983-05-01

    The production of prompt leptons at PETRA has been measured for c.m. energies of 14, 22 and 34 GeV. The rate of prompt electrons and muons is presented, including a determination of the semileptonic branching ratio of the c and b quarks. Systematic effects due to changes in fragmentation and other model parameters have been studied. (orig./HSI)

  8. Implementation of medical scribes in an academic urology practice: an analysis of productivity, revenue, and satisfaction.

    Science.gov (United States)

    McCormick, Benjamin J; Deal, Allison; Borawski, Kristy M; Raynor, Mathew C; Viprakasit, Davis; Wallen, Eric M; Woods, Michael E; Pruthi, Raj S

    2018-04-10

    Pressure on physicians to increase productivity is rising in parallel with administrative tasks, regulations, and the use of electronic health records (EHRs). Physician extenders and clinical pathways are already in use to increase productivity and reduce costs and burnout, but other strategies are required. We evaluated whether implementation of medical scribes in an academic urology clinic would affect productivity, revenue, and patient/provider satisfaction. Six academic urologists were assigned scribes for 1 clinic day per week for 3 months. Likert-type patient and provider surveys were developed to evaluate satisfaction with and without scribes. Matched clinic days in the year prior were used to evaluate changes in productivity and physician/hospital charges and revenue. After using scribes for 3 months, providers reported increased efficiency (p value = 0.03) and work satisfaction (p value = 0.03), while seeing a mean 2.15 more patients per session (+ 0.96 return visits, + 0.99 new patients, and + 0.22 procedures), contributing to an additional 2.6 wRVUs, $542 in physician charges, and $861 in hospital charges per clinic session. At a gross collection rate of 36%, actual combined revenue was + $506/session, representing a 26% increase in overall revenue. At a cost of $77/session, the net financial impact was + $429 per clinic session, resulting in a return-to-investment ratio greater than 6:1, while having no effect on patient satisfaction scores. Additionally, with scribes, clinic encounters were closed a mean 8.9 days earlier. Implementing medical scribes in academic urology practices may be useful in increasing productivity, revenue, and provider satisfaction, while maintaining high patient satisfaction.

  9. Perceived harm, addictiveness, and social acceptability of tobacco products and marijuana among young adults: marijuana, hookah, and electronic cigarettes win.

    Science.gov (United States)

    Berg, Carla J; Stratton, Erin; Schauer, Gillian L; Lewis, Michael; Wang, Yanwen; Windle, Michael; Kegler, Michelle

    2015-01-01

    There has been an increase in non-daily smoking, alternative tobacco product and marijuana use among young adults in recent years. This study examined perceptions of health risks, addictiveness, and social acceptability of cigarettes, cigar products, smokeless tobacco, hookah, electronic cigarettes, and marijuana among young adults and correlates of such perceptions. In Spring 2013, 10,000 students at two universities in the Southeastern United States were recruited to complete an online survey (2,002 respondents), assessing personal, parental, and peer use of each product; and perceptions of health risks, addictiveness, and social acceptability of each of these products. Marijuana was the most commonly used product in the past month (19.2%), with hookah being the second most commonly used (16.4%). The least commonly used were smokeless tobacco products (2.6%) and electronic cigarettes (4.5%). There were high rates of concurrent product use, particularly among electronic cigarette users. The most positively perceived was marijuana, with hookah and electronic cigarettes being second. While tobacco use and related social factors, related positively, influenced perceptions of marijuana, marijuana use and related social factors were not associated with perceptions of any tobacco product. Conclusions/Importance: Marketing efforts to promote electronic cigarettes and hookah to be safe and socially acceptable seem to be effective, while policy changes seem to be altering perceptions of marijuana and related social norms. Research is needed to document the health risks and addictive nature of emerging tobacco products and marijuana and evaluate efforts to communicate such risks to youth.

  10. Correlation analysis of electronic products with myopia in preschool and school aged children

    Directory of Open Access Journals (Sweden)

    Li-Li Sun

    2016-02-01

    Full Text Available AIM: To explore the influence of electronic products on myopia in preschool and school aged children, and the development regularities of myopia, to formulate reasonable guidelines for using eyes healthily, and lay a solid foundation for the prevention and control work. METHODS: This retrospective analysis enrolled 900 3~12 years old children from outpatients department, and all of them were established individualized archives, recording: uncorrected visual acuity, optometry, slit lamp, ophthalmoscopy, strabismus inspection results; recording eye usage condition on TVs, computers, mobile phones, iPad, homework, extra-curricular books. Statistical analyze the refractive status of each age group, the use of electronic products of different age groups and their correlation with refractive status. RESULTS: The number of preschool children with normal uncorrected visual acuity was more than that of early school-age children, and the difference was statistically significant(PP>0.05; the number of children aged 7~12(early school aged childrenwith myopia was more than that of children aged 3~6(preschool childrenand the difference was statistically significant(PCONCLUSION: For preschool children, it is necessary to conduct early screening, health guidance, the establishment of personalized medical records and one-to-one personalized guidance; it is also needed to avoid the arduous learning task with the stacking usage of eyes, to fight for myopia and to control the development of myopia. Therefore, to reduce the use of electronic products has become a topic worthy of further study.

  11. Postponed variety creation: case study in consumer electronics retail

    DEFF Research Database (Denmark)

    Appelqvist, Patrik; Gubi, Ebbe

    2004-01-01

    Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design...... is beneficial in retail. Findings – In the case company, shop inventory is necessary for high-volume and low-variety products. Postponing variety creation to shops has the potential to decrease inventories for these products by 40-80 per cent. The benefits of postponement depend on delivery speed requirement......, product value, product variety and shop size. Research limitations/implications – Many contributions on postponement have been conceptual. This study contains a quantitative test. The study considers both the spatial dimension (where) and the temporal dimension (when) of postponement. Practical...

  12. Postponed variety creation: case study in consumer electronics retail

    DEFF Research Database (Denmark)

    Appelqvist, Patrik; Gubi, Ebbe

    2005-01-01

    Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design...... is beneficial in retail. Findings – In the case company, shop inventory is necessary for high-volume and low-variety products. Postponing variety creation to shops has the potential to decrease inventories for these products by 40-80 per cent. The benefits of postponement depend on delivery speed requirement......, product value, product variety and shop size. Research limitations/implications – Many contributions on postponement have been conceptual. This study contains a quantitative test. The study considers both the spatial dimension (where) and the temporal dimension (when) of postponement. Practical...

  13. A Novel Method for the Discrimination of Semen Arecae and Its Processed Products by Using Computer Vision, Electronic Nose, and Electronic Tongue

    Directory of Open Access Journals (Sweden)

    Min Xu

    2015-01-01

    Full Text Available Areca nut, commonly known locally as Semen Arecae (SA in China, has been used as an important Chinese herbal medicine for thousands of years. The raw SA (RAW is commonly processed by stir-baking to yellow (SBY, stir-baking to dark brown (SBD, and stir-baking to carbon dark (SBC for different clinical uses. In our present investigation, intelligent sensory technologies consisting of computer vision (CV, electronic nose (E-nose, and electronic tongue (E-tongue were employed in order to develop a novel and accurate method for discrimination of SA and its processed products. Firstly, the color parameters and electronic sensory responses of E-nose and E-tongue of the samples were determined, respectively. Then, indicative components including 5-hydroxymethyl furfural (5-HMF and arecoline (ARE were determined by HPLC. Finally, principal component analysis (PCA and discriminant factor analysis (DFA were performed. The results demonstrated that these three instruments can effectively discriminate SA and its processed products. 5-HMF and ARE can reflect the stir-baking degree of SA. Interestingly, the two components showed close correlations to the color parameters and sensory responses of E-nose and E-tongue. In conclusion, this novel method based on CV, E-nose, and E-tongue can be successfully used to discriminate SA and its processed products.

  14. Beauty production in pp collisions at √(s)=2.76 TeV measured via semi-electronic decays

    Energy Technology Data Exchange (ETDEWEB)

    Abelev, B. [Lawrence Livermore National Laboratory, Livermore, CA (United States); Adam, J. [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague (Czech Republic); Adamová, D. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, Řež u Prahy (Czech Republic); Aggarwal, M.M. [Physics Department, Panjab University, Chandigarh (India); Aglieri Rinella, G. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Agnello, M. [Sezione INFN, Turin (Italy); Politecnico di Torino, Turin (Italy); Agostinelli, A. [Dipartimento di Fisica e Astronomia dell' Università and Sezione INFN, Bologna (Italy); Agrawal, N. [Indian Institute of Technology Bombay (IIT), Mumbai (India); Ahammed, Z. [Variable Energy Cyclotron Centre, Kolkata (India); Ahmad, N. [Department of Physics, Aligarh Muslim University, Aligarh (India); Ahmed, I. [COMSATS Institute of Information Technology (CIIT), Islamabad (Pakistan); Ahn, S.U.; Ahn, S.A. [Korea Institute of Science and Technology Information, Daejeon (Korea, Republic of); Aimo, I. [Sezione INFN, Turin (Italy); Politecnico di Torino, Turin (Italy); Aiola, S. [Yale University, New Haven, CT (United States); Ajaz, M. [COMSATS Institute of Information Technology (CIIT), Islamabad (Pakistan); Akindinov, A. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Alam, S.N. [Variable Energy Cyclotron Centre, Kolkata (India); Aleksandrov, D. [Russian Research Centre Kurchatov Institute, Moscow (Russian Federation); Alessandro, B. [Sezione INFN, Turin (Italy); and others

    2014-11-10

    The ALICE Collaboration at the LHC reports measurement of the inclusive production cross section of electrons from semi-leptonic decays of beauty hadrons with rapidity |y|<0.8 and transverse momentum 1Electrons not originating from semi-electronic decay of beauty hadrons are suppressed using the impact parameter of the corresponding tracks. The production cross section of beauty decay electrons is compared to the result obtained with an alternative method which uses the distribution of the azimuthal angle between heavy-flavour decay electrons and charged hadrons. Perturbative QCD predictions agree with the measured cross section within the experimental and theoretical uncertainties. The integrated visible cross section, σ{sub b→e}=3.47±0.40(stat){sub −1.33}{sup +1.12}(sys)±0.07(norm) μb, was extrapolated to full phase space using Fixed Order plus Next-to-Leading Log (FONLL) calculations to obtain the total bb{sup ¯} production cross section, σ{sub bb{sup ¯}}=130±15.1(stat){sub −49.8}{sup +42.1}(sys){sub −3.1}{sup +3.4}(extr)±2.5(norm)±4.4(BR) μb.

  15. Possibility of some radionuclides production using high energy electron Bremsstrahlung

    International Nuclear Information System (INIS)

    Balzhinnyam, N.; Belov, A.G.; Gehrbish, Sh; Maslov, O.D.; Shvetsov, V.N.; Ganbold, G.

    2008-01-01

    The method of some radionuclides production using high energy Bremsstrahlung of electron accelerators and determination of photonuclear reaction yield and specific activities for some radionuclides is described. Photonuclear reaction yield and specific activities for some radionuclides are determined for 117m Sn, 111 In and 195m Pt. Based on the experimental data obtained at low energy (E e- e- = 75 MeV) of the IREN facility (FLNR, JINR) at irradiation of high purity platinum and tin metals

  16. INVARIANT PRACTICAL TASKS FOR WORK WITH ELECTRONIC SPREADSHEETS AT THE SECONDARY SCHOOL

    Directory of Open Access Journals (Sweden)

    Л И Карташова

    2016-12-01

    Full Text Available In article examples of practical jobs on creation and editing electronic spreadsheets for pupils of the main school are given. For fixing of knowledge and abilities of pupils on formatting of cells they are offered to create, for example, in the plate processor the table and to make its formatting on a sample which shall be brought to the computer monitor, is printed on a color printer and is laid out on the local area network in the form of the image. In the course of assimilation of data types jobs for determination and the explanation of data types to which different strings belong are offered school students. For assimilation of features of record of formulas school students are offered to write different mathematical expressions in the look suitable for use in electronic spreadsheets.Jobs reflect fundamental invariant approach to implementation of technology of operation with electronic spreadsheets as don’t depend on specific versions of computer programs. The provided jobs can be used in case of study of any plate processors. In training activity on the basis of use of invariant jobs there is a mastering the generalized methods of activities to numerical information that will allow to create a system view on use of information technologies and to consciously apply them to the solution of tasks.

  17. Review of the Code of Practice for the Radiosterilization of Medical Products

    International Nuclear Information System (INIS)

    Kallings, L.O.

    1967-01-01

    The background of the IAEA recommendations for a Code of Practice is outlined. The possibility of laying down broad safety margins based on scientific foresight and detailed advanced planning will serve to guide the rapidly accelerating acceptance of radiosterilization by industry, especially in those firms producing supplies for use in medicine and surgery. Production control should be attuned to the scientific and technological advances, and it is becoming clear that the focus of control should be moved away from sterility testing of the finished products to hygienic and sterile operations during the manufacturing operations themselves. The contamination of the product before sterilization should already have been kept to a minimum, and this pre-sterilization level of contamination should be regularly recorded using bacteriological tests. The choice of dosage should be based on average pre-sterilization counts and the inactivation factors found desirable for die intended use of the product. On commissioning, or whenever an existing process is altered, the efficiency of the irradiation facility must be tested using microbiological reference standards. The margin of safety should be checked by using deliberately contaminated articles. However, the backbone of the control procedures must still be dosimetry. The preparation of a Code of Practice for the Radiosterilization of Medical Products will constitute a challenge to operators working with other sterilizing procedures. (author)

  18. Beauty production in pp collisions at $\\sqrt{s}$ = 2.76 TeV measured via semi-electronic decays

    CERN Document Server

    Abelev, Betty Bezverkhny; Adamova, Dagmar; Aggarwal, Madan Mohan; Aglieri Rinella, Gianluca; Agnello, Michelangelo; Agostinelli, Andrea; Agrawal, Neelima; Ahammed, Zubayer; Ahmad, Nazeer; Ahmed, Ijaz; Ahn, Sang Un; Ahn, Sul-Ah; Aimo, Ilaria; Aiola, Salvatore; Ajaz, Muhammad; Akindinov, Alexander; Alam, Sk Noor; Aleksandrov, Dmitry; Alessandro, Bruno; Alexandre, Didier; Alici, Andrea; Alkin, Anton; Alme, Johan; Alt, Torsten; Altinpinar, Sedat; Altsybeev, Igor; Alves Garcia Prado, Caio; Andrei, Cristian; Andronic, Anton; Anguelov, Venelin; Anielski, Jonas; Anticic, Tome; Antinori, Federico; Antonioli, Pietro; Aphecetche, Laurent Bernard; Appelshaeuser, Harald; Arcelli, Silvia; Armesto Perez, Nestor; Arnaldi, Roberta; Aronsson, Tomas; Arsene, Ionut Cristian; Arslandok, Mesut; Augustinus, Andre; Averbeck, Ralf Peter; Awes, Terry; Azmi, Mohd Danish; Bach, Matthias Jakob; Badala, Angela; Baek, Yong Wook; Bagnasco, Stefano; Bailhache, Raphaelle Marie; Bala, Renu; Baldisseri, Alberto; Baltasar Dos Santos Pedrosa, Fernando; Baral, Rama Chandra; Barbera, Roberto; Barile, Francesco; Barnafoldi, Gergely Gabor; Barnby, Lee Stuart; Ramillien Barret, Valerie; Bartke, Jerzy Gustaw; Basile, Maurizio; Bastid, Nicole; Basu, Sumit; Bathen, Bastian; Batigne, Guillaume; Batista Camejo, Arianna; Batyunya, Boris; Batzing, Paul Christoph; Baumann, Christoph Heinrich; Bearden, Ian Gardner; Beck, Hans; Bedda, Cristina; Behera, Nirbhay Kumar; Belikov, Iouri; Bellini, Francesca; Bellwied, Rene; Belmont Moreno, Ernesto; Belmont Iii, Ronald John; Belyaev, Vladimir; Bencedi, Gyula; Beole, Stefania; Berceanu, Ionela; Bercuci, Alexandru; Berdnikov, Yaroslav; Berenyi, Daniel; Berger, Martin Emanuel; Bertens, Redmer Alexander; Berzano, Dario; Betev, Latchezar; Bhasin, Anju; Bhat, Inayat Rasool; Bhati, Ashok Kumar; Bhattacharjee, Buddhadeb; Bhom, Jihyun; Bianchi, Livio; Bianchi, Nicola; Bianchin, Chiara; Bielcik, Jaroslav; Bielcikova, Jana; Bilandzic, Ante; Bjelogrlic, Sandro; Blanco, Fernando; Blau, Dmitry; Blume, Christoph; Bock, Friederike; Bogdanov, Alexey; Boggild, Hans; Bogolyubskiy, Mikhail; Boehmer, Felix Valentin; Boldizsar, Laszlo; Bombara, Marek; Book, Julian Heinz; Borel, Herve; Borissov, Alexander; Bossu, Francesco; Botje, Michiel; Botta, Elena; Boettger, Stefan; Braun-Munzinger, Peter; Bregant, Marco; Breitner, Timo Gunther; Broker, Theo Alexander; Browning, Tyler Allen; Broz, Michal; Bruna, Elena; Bruno, Giuseppe Eugenio; Budnikov, Dmitry; Buesching, Henner; Bufalino, Stefania; Buncic, Predrag; Busch, Oliver; Buthelezi, Edith Zinhle; Caffarri, Davide; Cai, Xu; Caines, Helen Louise; Calero Diaz, Liliet; Caliva, Alberto; Calvo Villar, Ernesto; Camerini, Paolo; Carena, Francesco; Carena, Wisla; Castillo Castellanos, Javier Ernesto; Casula, Ester Anna Rita; Catanescu, Vasile Ioan; Cavicchioli, Costanza; Ceballos Sanchez, Cesar; Cepila, Jan; Cerello, Piergiorgio; Chang, Beomsu; Chapeland, Sylvain; Charvet, Jean-Luc Fernand; Chattopadhyay, Subhasis; Chattopadhyay, Sukalyan; Chelnokov, Volodymyr; Cherney, Michael Gerard; Cheshkov, Cvetan Valeriev; Cheynis, Brigitte; Chibante Barroso, Vasco Miguel; Dobrigkeit Chinellato, David; Chochula, Peter; Chojnacki, Marek; Choudhury, Subikash; Christakoglou, Panagiotis; Christensen, Christian Holm; Christiansen, Peter; Chujo, Tatsuya; Chung, Suh-Urk; Cicalo, Corrado; Cifarelli, Luisa; Cindolo, Federico; Cleymans, Jean Willy Andre; Colamaria, Fabio Filippo; Colella, Domenico; Collu, Alberto; Colocci, Manuel; Conesa Balbastre, Gustavo; Conesa Del Valle, Zaida; Connors, Megan Elizabeth; Contreras Nuno, Jesus Guillermo; Cormier, Thomas Michael; Corrales Morales, Yasser; Cortese, Pietro; Cortes Maldonado, Ismael; Cosentino, Mauro Rogerio; Costa, Filippo; Crochet, Philippe; Cruz Albino, Rigoberto; Cuautle Flores, Eleazar; Cunqueiro Mendez, Leticia; Dainese, Andrea; Dang, Ruina; Danu, Andrea; Das, Debasish; Das, Indranil; Das, Kushal; Das, Supriya; Dash, Ajay Kumar; Dash, Sadhana; De, Sudipan; Delagrange, Hugues; Deloff, Andrzej; Denes, Ervin Sandor; D'Erasmo, Ginevra; De Caro, Annalisa; De Cataldo, Giacinto; De Cuveland, Jan; De Falco, Alessandro; De Gruttola, Daniele; De Marco, Nora; De Pasquale, Salvatore; De Rooij, Raoul Stefan; Diaz Corchero, Miguel Angel; Dietel, Thomas; Dillenseger, Pascal; Divia, Roberto; Di Bari, Domenico; Di Liberto, Sergio; Di Mauro, Antonio; Di Nezza, Pasquale; Djuvsland, Oeystein; Dobrin, Alexandru Florin; Dobrowolski, Tadeusz Antoni; Domenicis Gimenez, Diogenes; Donigus, Benjamin; Dordic, Olja; Dorheim, Sverre; Dubey, Anand Kumar; Dubla, Andrea; Ducroux, Laurent; Dupieux, Pascal; Dutt Mazumder, Abhee Kanti; Hilden, Timo Eero; Ehlers Iii, Raymond James; Elia, Domenico; Engel, Heiko; Erazmus, Barbara Ewa; Erdal, Hege Austrheim; Eschweiler, Dominic; Espagnon, Bruno; Esposito, Marco; Estienne, Magali Danielle; Esumi, Shinichi; Evans, David; Evdokimov, Sergey; Fabris, Daniela; Faivre, Julien; Falchieri, Davide; Fantoni, Alessandra; Fasel, Markus; Fehlker, Dominik; Feldkamp, Linus; Felea, Daniel; Feliciello, Alessandro; Feofilov, Grigory; Ferencei, Jozef; Fernandez Tellez, Arturo; Gonzalez Ferreiro, Elena; Ferretti, Alessandro; Festanti, Andrea; Figiel, Jan; Araujo Silva Figueredo, Marcel; Filchagin, Sergey; Finogeev, Dmitry; Fionda, Fiorella; Fiore, Enrichetta Maria; Floratos, Emmanouil; Floris, Michele; Foertsch, Siegfried Valentin; Foka, Panagiota; Fokin, Sergey; Fragiacomo, Enrico; Francescon, Andrea; Frankenfeld, Ulrich Michael; Fuchs, Ulrich; Furget, Christophe; Fusco Girard, Mario; Gaardhoeje, Jens Joergen; Gagliardi, Martino; Gago Medina, Alberto Martin; Gallio, Mauro; Gangadharan, Dhevan Raja; Ganoti, Paraskevi; Gao, Chaosong; Garabatos Cuadrado, Jose; Garcia-Solis, Edmundo Javier; Gargiulo, Corrado; Garishvili, Irakli; Gerhard, Jochen; Germain, Marie; Gheata, Andrei George; Gheata, Mihaela; Ghidini, Bruno; Ghosh, Premomoy; Ghosh, Sanjay Kumar; Gianotti, Paola; Giubellino, Paolo; Gladysz-Dziadus, Ewa; Glassel, Peter; Gomez Ramirez, Andres; Gonzalez Zamora, Pedro; Gorbunov, Sergey; Gorlich, Lidia Maria; Gotovac, Sven; Graczykowski, Lukasz Kamil; Grelli, Alessandro; Grigoras, Alina Gabriela; Grigoras, Costin; Grigoryev, Vladislav; Grigoryan, Ara; Grigoryan, Smbat; Grynyov, Borys; Grion, Nevio; Grosse-Oetringhaus, Jan Fiete; Grossiord, Jean-Yves; Grosso, Raffaele; Guber, Fedor; Guernane, Rachid; Guerzoni, Barbara; Guilbaud, Maxime Rene Joseph; Gulbrandsen, Kristjan Herlache; Gulkanyan, Hrant; Gumbo, Mervyn; Gunji, Taku; Gupta, Anik; Gupta, Ramni; Khan, Kamal; Haake, Rudiger; Haaland, Oystein Senneset; Hadjidakis, Cynthia Marie; Haiduc, Maria; Hamagaki, Hideki; Hamar, Gergoe; Hanratty, Luke David; Hansen, Alexander; Harris, John William; Hartmann, Helvi; Harton, Austin Vincent; Hatzifotiadou, Despina; Hayashi, Shinichi; Heckel, Stefan Thomas; Heide, Markus Ansgar; Helstrup, Haavard; Herghelegiu, Andrei Ionut; Herrera Corral, Gerardo Antonio; Hess, Benjamin Andreas; Hetland, Kristin Fanebust; Hippolyte, Boris; Hladky, Jan; Hristov, Peter Zahariev; Huang, Meidana; Humanic, Thomas; Hussain, Nur; Hutter, Dirk; Hwang, Dae Sung; Ilkaev, Radiy; Ilkiv, Iryna; Inaba, Motoi; Innocenti, Gian Michele; Ionita, Costin; Ippolitov, Mikhail; Irfan, Muhammad; Ivanov, Marian; Ivanov, Vladimir; Jacholkowski, Adam Wlodzimierz; Jacobs, Peter Martin; Jahnke, Cristiane; Jang, Haeng Jin; Janik, Malgorzata Anna; Pahula Hewage, Sandun; Jena, Chitrasen; Jena, Satyajit; Jimenez Bustamante, Raul Tonatiuh; Jones, Peter Graham; Jung, Hyungtaik; Jusko, Anton; Kadyshevskiy, Vladimir; Kalcher, Sebastian; Kalinak, Peter; Kalweit, Alexander Philipp; Kamin, Jason Adrian; Kang, Ju Hwan; Kaplin, Vladimir; Kar, Somnath; Karasu Uysal, Ayben; Karavichev, Oleg; Karavicheva, Tatiana; Karpechev, Evgeny; Kebschull, Udo Wolfgang; Keidel, Ralf; Keijdener, Darius Laurens; Khan, Mohammed Mohisin; Khan, Palash; Khan, Shuaib Ahmad; Khanzadeev, Alexei; Kharlov, Yury; Kileng, Bjarte; Kim, Beomkyu; Kim, Do Won; Kim, Dong Jo; Kim, Jinsook; Kim, Mimae; Kim, Minwoo; Kim, Se Yong; Kim, Taesoo; Kirsch, Stefan; Kisel, Ivan; Kiselev, Sergey; Kisiel, Adam Ryszard; Kiss, Gabor; Klay, Jennifer Lynn; Klein, Jochen; Klein-Boesing, Christian; Kluge, Alexander; Knichel, Michael Linus; Knospe, Anders Garritt; Kobdaj, Chinorat; Kofarago, Monika; Kohler, Markus Konrad; Kollegger, Thorsten; Kolozhvari, Anatoly; Kondratev, Valerii; Kondratyeva, Natalia; Konevskikh, Artem; Kovalenko, Vladimir; Kowalski, Marek; Kox, Serge; Koyithatta Meethaleveedu, Greeshma; Kral, Jiri; Kralik, Ivan; Kravcakova, Adela; Krelina, Michal; Kretz, Matthias; Krivda, Marian; Krizek, Filip; Kryshen, Evgeny; Krzewicki, Mikolaj; Kucera, Vit; Kucheryaev, Yury; Kugathasan, Thanushan; Kuhn, Christian Claude; Kuijer, Paulus Gerardus; Kulakov, Igor; Kumar, Jitendra; Kurashvili, Podist; Kurepin, Alexander; Kurepin, Alexey; Kuryakin, Alexey; Kushpil, Svetlana; Kweon, Min Jung; Kwon, Youngil; Ladron De Guevara, Pedro; Lagana Fernandes, Caio; Lakomov, Igor; Langoy, Rune; Lara Martinez, Camilo Ernesto; Lardeux, Antoine Xavier; Lattuca, Alessandra; La Pointe, Sarah Louise; La Rocca, Paola; Lea, Ramona; Leardini, Lucia; Lee, Graham Richard; Legrand, Iosif; Lehnert, Joerg Walter; Lemmon, Roy Crawford; Lenti, Vito; Leogrande, Emilia; Leoncino, Marco; Leon Monzon, Ildefonso; Levai, Peter; Li, Shuang; Lien, Jorgen Andre; Lietava, Roman; Lindal, Svein; Lindenstruth, Volker; Lippmann, Christian; Lisa, Michael Annan; Ljunggren, Hans Martin; Lodato, Davide Francesco; Lonne, Per-Ivar; Loggins, Vera Renee; Loginov, Vitaly; Lohner, Daniel; Loizides, Constantinos; Lopez, Xavier Bernard; Lopez Torres, Ernesto; Lu, Xianguo; Luettig, Philipp Johannes; Lunardon, Marcello; Luparello, Grazia; Ma, Rongrong; Maevskaya, Alla; Mager, Magnus; Mahapatra, Durga Prasad; Mahmood, Sohail Musa; Maire, Antonin; Majka, Richard Daniel; Malaev, Mikhail; Maldonado Cervantes, Ivonne Alicia; Malinina, Liudmila; Mal'Kevich, Dmitry; Malzacher, Peter; Mamonov, Alexander; Manceau, Loic Henri Antoine; Manko, Vladislav; Manso, Franck; Manzari, Vito; Marchisone, Massimiliano; Mares, Jiri; Margagliotti, Giacomo Vito; Margotti, Anselmo; Marin, Ana Maria; Markert, Christina; Marquard, Marco; Martashvili, Irakli; Martin, Nicole Alice; Martinengo, Paolo; Martinez Hernandez, Mario Ivan; Martinez-Garcia, Gines; Martin Blanco, Javier; Martynov, Yevgen; Mas, Alexis Jean-Michel; Masciocchi, Silvia; Masera, Massimo; Masoni, Alberto; Massacrier, Laure Marie; Mastroserio, Annalisa; Matyja, Adam Tomasz; Mayer, Christoph; Mazer, Joel Anthony; Mazzoni, Alessandra Maria; Meddi, Franco; Menchaca-Rocha, Arturo Alejandro; Mercado-Perez, Jorge; Meres, Michal; Miake, Yasuo; Mikhaylov, Konstantin; Milano, Leonardo; Milosevic, Jovan; Mischke, Andre; Mishra, Aditya Nath; Miskowiec, Dariusz Czeslaw; Mitra, Jubin; Mitu, Ciprian Mihai; Mlynarz, Jocelyn; Mohammadi, Naghmeh; Mohanty, Bedangadas; Molnar, Levente; Montano Zetina, Luis Manuel; Montes Prado, Esther; Morando, Maurizio; Moreira De Godoy, Denise Aparecida; Moretto, Sandra; Morreale, Astrid; Morsch, Andreas; Muccifora, Valeria; Mudnic, Eugen; Muhlheim, Daniel Michael; Muhuri, Sanjib; Mukherjee, Maitreyee; Muller, Hans; Gameiro Munhoz, Marcelo; Murray, Sean; Musa, Luciano; Musinsky, Jan; Nandi, Basanta Kumar; Nania, Rosario; Nappi, Eugenio; Nattrass, Christine; Nayak, Kishora; Nayak, Tapan Kumar; Nazarenko, Sergey; Nedosekin, Alexander; Nicassio, Maria; Niculescu, Mihai; Nielsen, Borge Svane; Nikolaev, Sergey; Nikulin, Sergey; Nikulin, Vladimir; Nilsen, Bjorn Steven; Noferini, Francesco; Nomokonov, Petr; Nooren, Gerardus; Norman, Jaime; Nyanin, Alexander; Nystrand, Joakim Ingemar; Oeschler, Helmut Oskar; Oh, Saehanseul; Oh, Sun Kun; Okatan, Ali; Olah, Laszlo; Oleniacz, Janusz; Oliveira Da Silva, Antonio Carlos; Onderwaater, Jacobus; Oppedisano, Chiara; Ortiz Velasquez, Antonio; Oskarsson, Anders Nils Erik; Otwinowski, Jacek Tomasz; Oyama, Ken; Ozdemir, Mahmut; Sahoo, Pragati; Pachmayer, Yvonne Chiara; Pachr, Milos; Pagano, Paola; Paic, Guy; Painke, Florian; Pajares Vales, Carlos; Pal, Susanta Kumar; Palmeri, Armando; Pant, Divyash; Papikyan, Vardanush; Pappalardo, Giuseppe; Pareek, Pooja; Park, Woojin; Parmar, Sonia; Passfeld, Annika; Patalakha, Dmitry; Paticchio, Vincenzo; Paul, Biswarup; Pawlak, Tomasz Jan; Peitzmann, Thomas; Pereira Da Costa, Hugo Denis Antonio; Pereira De Oliveira Filho, Elienos; Peresunko, Dmitry Yurevich; Perez Lara, Carlos Eugenio; Pesci, Alessandro; Peskov, Vladimir; Pestov, Yury; Petracek, Vojtech; Petran, Michal; Petris, Mariana; Petrovici, Mihai; Petta, Catia; Piano, Stefano; Pikna, Miroslav; Pillot, Philippe; Pinazza, Ombretta; Pinsky, Lawrence; Piyarathna, Danthasinghe; Ploskon, Mateusz Andrzej; Planinic, Mirko; Pluta, Jan Marian; Pochybova, Sona; Podesta Lerma, Pedro Luis Manuel; Poghosyan, Martin; Pohjoisaho, Esko Heikki Oskari; Polishchuk, Boris; Poljak, Nikola; Pop, Amalia; Porteboeuf, Sarah Julie; Porter, R Jefferson; Potukuchi, Baba; Prasad, Sidharth Kumar; Preghenella, Roberto; Prino, Francesco; Pruneau, Claude Andre; Pshenichnov, Igor; Puddu, Giovanna; Pujahari, Prabhat Ranjan; Punin, Valery; Putschke, Jorn Henning; Qvigstad, Henrik; Rachevski, Alexandre; Raha, Sibaji; Rak, Jan; Rakotozafindrabe, Andry Malala; Ramello, Luciano; Raniwala, Rashmi; Raniwala, Sudhir; Rasanen, Sami Sakari; Rascanu, Bogdan Theodor; Rathee, Deepika; Rauf, Aamer Wali; Razazi, Vahedeh; Read, Kenneth Francis; Real, Jean-Sebastien; Redlich, Krzysztof; Reed, Rosi Jan; Rehman, Attiq Ur; Reichelt, Patrick Simon; Reicher, Martijn; Reidt, Felix; Renfordt, Rainer Arno Ernst; Reolon, Anna Rita; Reshetin, Andrey; Rettig, Felix Vincenz; Revol, Jean-Pierre; Reygers, Klaus Johannes; Riabov, Viktor; Ricci, Renato Angelo; Richert, Tuva Ora Herenui; Richter, Matthias Rudolph; Riedler, Petra; Riegler, Werner; Riggi, Francesco; Rivetti, Angelo; Rocco, Elena; Rodriguez Cahuantzi, Mario; Rodriguez Manso, Alis; Roeed, Ketil; Rogochaya, Elena; Sharma, Rohni; Rohr, David Michael; Roehrich, Dieter; Romita, Rosa; Ronchetti, Federico; Ronflette, Lucile; Rosnet, Philippe; Rossi, Andrea; Roukoutakis, Filimon; Roy, Ankhi; Roy, Christelle Sophie; Roy, Pradip Kumar; Rubio Montero, Antonio Juan; Rui, Rinaldo; Russo, Riccardo; Ryabinkin, Evgeny; Ryabov, Yury; Rybicki, Andrzej; Sadovskiy, Sergey; Safarik, Karel; Sahlmuller, Baldo; Sahoo, Raghunath; Sahu, Pradip Kumar; Saini, Jogender; Sakai, Shingo; Salgado Lopez, Carlos Alberto; Salzwedel, Jai Samuel Nielsen; Sambyal, Sanjeev Singh; Samsonov, Vladimir; Sanchez Castro, Xitzel; Sanchez Rodriguez, Fernando Javier; Sandor, Ladislav; Sandoval, Andres; Sano, Masato; Santagati, Gianluca; Sarkar, Debojit; Scapparone, Eugenio; Scarlassara, Fernando; Scharenberg, Rolf Paul; Schiaua, Claudiu Cornel; Schicker, Rainer Martin; Schmidt, Christian Joachim; Schmidt, Hans Rudolf; Schuchmann, Simone; Schukraft, Jurgen; Schulc, Martin; Schuster, Tim Robin; Schutz, Yves Roland; Schwarz, Kilian Eberhard; Schweda, Kai Oliver; Scioli, Gilda; Scomparin, Enrico; Scott, Rebecca Michelle; Segato, Gianfranco; Seger, Janet Elizabeth; Sekiguchi, Yuko; Selyuzhenkov, Ilya; Seo, Jeewon; Serradilla Rodriguez, Eulogio; Sevcenco, Adrian; Shabetai, Alexandre; Shabratova, Galina; Shahoyan, Ruben; Shangaraev, Artem; Sharma, Natasha; Sharma, Satish; Shigaki, Kenta; Shtejer Diaz, Katherin; Sibiryak, Yury; Siddhanta, Sabyasachi; Siemiarczuk, Teodor; Silvermyr, David Olle Rickard; Silvestre, Catherine Micaela; Simatovic, Goran; Singaraju, Rama Narayana; Singh, Ranbir; Singha, Subhash; Singhal, Vikas; Sinha, Bikash; Sarkar - Sinha, Tinku; Sitar, Branislav; Sitta, Mario; Skaali, Bernhard; Skjerdal, Kyrre; Slupecki, Maciej; Smirnov, Nikolai; Snellings, Raimond; Soegaard, Carsten; Soltz, Ron Ariel; Song, Jihye; Song, Myunggeun; Soramel, Francesca; Sorensen, Soren Pontoppidan; Spacek, Michal; Spiriti, Eleuterio; Sputowska, Iwona Anna; Spyropoulou-Stassinaki, Martha; Srivastava, Brijesh Kumar; Stachel, Johanna; Stan, Ionel; Stefanek, Grzegorz; Steinpreis, Matthew Donald; Stenlund, Evert Anders; Steyn, Gideon Francois; Stiller, Johannes Hendrik; Stocco, Diego; Stolpovskiy, Mikhail; Strmen, Peter; Alarcon Do Passo Suaide, Alexandre; Sugitate, Toru; Suire, Christophe Pierre; Suleymanov, Mais Kazim Oglu; Sultanov, Rishat; Sumbera, Michal; Susa, Tatjana; Symons, Timothy; Szabo, Alexander; Szanto De Toledo, Alejandro; Szarka, Imrich; Szczepankiewicz, Adam; Szymanski, Maciej Pawel; Takahashi, Jun; Tangaro, Marco-Antonio; Tapia Takaki, Daniel Jesus; Tarantola Peloni, Attilio; Tarazona Martinez, Alfonso; Tarzila, Madalina-Gabriela; Tauro, Arturo; Tejeda Munoz, Guillermo; Telesca, Adriana; Terrevoli, Cristina; Thaeder, Jochen Mathias; Thomas, Deepa; Tieulent, Raphael Noel; Timmins, Anthony Robert; Toia, Alberica; Trubnikov, Victor; Trzaska, Wladyslaw Henryk; Tsuji, Tomoya; Tumkin, Alexandr; Turrisi, Rosario; Tveter, Trine Spedstad; Ullaland, Kjetil; Uras, Antonio; Usai, Gianluca; Vajzer, Michal; Vala, Martin; Valencia Palomo, Lizardo; Vallero, Sara; Vande Vyvre, Pierre; Van Der Maarel, Jasper; Van Hoorne, Jacobus Willem; Van Leeuwen, Marco; Diozcora Vargas Trevino, Aurora; Vargyas, Marton; Varma, Raghava; Vasileiou, Maria; Vasiliev, Andrey; Vechernin, Vladimir; Veldhoen, Misha; Velure, Arild; Venaruzzo, Massimo; Vercellin, Ermanno; Vergara Limon, Sergio; Vernet, Renaud; Verweij, Marta; Vickovic, Linda; Viesti, Giuseppe; Viinikainen, Jussi Samuli; Vilakazi, Zabulon; Villalobos Baillie, Orlando; Vinogradov, Alexander; Vinogradov, Leonid; Vinogradov, Yury; Virgili, Tiziano; Viyogi, Yogendra; Vodopyanov, Alexander; Volkl, Martin Andreas; Voloshin, Kirill; Voloshin, Sergey; Volpe, Giacomo; Von Haller, Barthelemy; Vorobyev, Ivan; Vranic, Danilo; Vrlakova, Janka; Vulpescu, Bogdan; Vyushin, Alexey; Wagner, Boris; Wagner, Jan; Wagner, Vladimir; Wang, Mengliang; Wang, Yifei; Watanabe, Daisuke; Weber, Michael; Wessels, Johannes Peter; Westerhoff, Uwe; Wiechula, Jens; Wikne, Jon; Wilde, Martin Rudolf; Wilk, Grzegorz Andrzej; Wilkinson, Jeremy John; Williams, Crispin; Windelband, Bernd Stefan; Winn, Michael Andreas; Yaldo, Chris G; Yamaguchi, Yorito; Yang, Hongyan; Yang, Ping; Yang, Shiming; Yano, Satoshi; Yasnopolskiy, Stanislav; Yi, Jungyu; Yin, Zhongbao; Yoo, In-Kwon; Yushmanov, Igor; Zaccolo, Valentina; Zach, Cenek; Zaman, Ali; Zampolli, Chiara; Zaporozhets, Sergey; Zarochentsev, Andrey; Zavada, Petr; Zavyalov, Nikolay; Zbroszczyk, Hanna Paulina; Zgura, Sorin Ion; Zhalov, Mikhail; Zhang, Haitao; Zhang, Xiaoming; Zhang, Yonghong; Zhao, Chengxin; Zhigareva, Natalia; Zhou, Daicui; Zhou, Fengchu; Zhou, You; Zhou, Zhuo; Zhu, Hongsheng; Zhu, Jianhui; Zhu, Xiangrong; Zichichi, Antonino; Zimmermann, Alice; Zimmermann, Markus Bernhard; Zinovjev, Gennady; Zoccarato, Yannick Denis; Zyzak, Maksym

    2014-11-10

    The ALICE collaboration at the LHC reports measurement of the inclusive production cross section of electrons from semi-leptonic decays of beauty hadrons with rapidity $|y|<0.8$ and transverse momentum $1Electrons not originating from semi-electronic decay of beauty hadrons are suppressed using the impact parameter of the corresponding tracks. The production cross section of beauty decay electrons is compared to the result obtained with an alternative method which uses the distribution of the azimuthal angle between heavy-flavour decay electrons and charged hadrons. Perturbative QCD calculations agree with the measured cross section within the experimental and theoretical uncertainties. The integrated visible cross section, $\\sigma_{\\mathrm{b} \\rightarrow \\mathrm{e}} = 3.47\\pm0.40(\\mathrm{stat})^{+1.12}_{-1.33}(\\mathrm{sys})\\pm0.07(\\mathrm{norm}) \\mu$b, was extrapolated to full phase space using Fixed Order plus Next-to-Leading ...

  19. Confronting the Ubiquity of Electronic Communication and Social Media: Ethical and Legal Considerations for Psychoeducational Practice

    Science.gov (United States)

    Demers, Joseph A.; Sullivan, Amanda L.

    2016-01-01

    Most U.S. children and adults use computers and the Internet on a daily basis. The pervasiveness of electronic communication in a variety of contexts, including home and school, raises ethical and legal concerns for school psychologists and those in related fields of practice, because of the risks to privacy and confidentiality, boundaries,…

  20. Practical Applications for Maintenance of Certification Products in Child and Adolescent Residency Training.

    Science.gov (United States)

    Williams, Laurel L; Sexson, Sandra; Dingle, Arden D; Young-Walker, Laine; John, Nadyah; Hunt, Jeffrey

    2016-04-01

    The authors evaluated whether Maintenance of Certification (MOC) Performance-in-Practice products in training increases trainee knowledge of MOC processes and is viewed by trainees as a useful activity. Six child and adolescent psychiatry fellowships used MOC products in continuity clinics to assess their usefulness as training tools. Two surveys assessed initial knowledge of MOC and usefulness of the activity. Forty-one fellows completed the initial survey. A majority of first-year fellows indicated lack of awareness of MOC in contrast to a majority of second-year fellows who indicated some awareness. Thirty-five fellows completed the second survey. A majority of first- and second-year fellows found the activity easy to execute and would change something about their practice as a result. Using MOC products in training appears to be a useful activity that may assist training programs in teaching the principles of self- and peer-learning.

  1. MEMS product engineering handling the diversity of an emerging technology best practices for cooperative development

    CERN Document Server

    Ortloff, Dirk; Hahn, Kai; Bieniek, Tomasz; Janczyk, Grzegorz; Bruck, Rainer

    2014-01-01

    This book provides the methodological background to directing cooperative product engineering projects in a micro and nanotechnology setting. The methodology is based on well-established methods like PRINCE2 and StageGate, which are supplemented by best practices that can be individually tailored to the actual nature and size of the project at hand. This book is intended for everyone who takes an active role in either practical product engineering or in teaching it. This includes project and product management staff and program management offices in companies working on innovation projects, those active in innovation, as well as professors and students in engineering and management.

  2. The art of co-production of knowledge in environmental sciences and management: lessons from international practice

    Science.gov (United States)

    Djenontin, Ida Nadia S.; Meadow, Alison M.

    2018-06-01

    This review paper addresses the challenging question of "how to" design and implement co-production of knowledge in climate science and other environmental and agricultural sciences. Based on a grounded theory review of nine (9) published case studies of transdisciplinary and collaborative research projects, the paper offers a set of common themes regarding specific components and processes for the design, implementation, and achievement of co-production of knowledge work, which represent the "Modus Operandi" of knowledge co-production. The analysis focuses on practical methodological guidance based on lessons from how different research teams have approached the challenges of complex collaborative research. We begin by identifying broad factors or actions that inhibit or facilitate the process, then highlight specific practices associated with co-production of knowledge and necessary competencies for undertaking co-production. We provide insights on issues such as the integration of social and professional cultures, gender and social equity, and power dynamics, and illustrate the different ways in which researchers have addressed these issues. By exploring the specific practices involved in knowledge co-production, this paper provides guidance to researchers on how to navigate different possibilities of the process of conducting transdisciplinary and co-production of knowledge research projects that best fit their research context, stakeholder needs, and research team capacities.

  3. Yields of primary products from chloroethylenes in air under electron beam irradiation

    International Nuclear Information System (INIS)

    Hakoda, Teruyuki; Hashimoto, Shoji; Kojima, Takuji

    2003-01-01

    The quantitative analysis of toxic primary irradiation products was carried out for the development of the purification technology of chloroethylenes/air mixtures using an electron beam (EB). Degradation of chloroethylenes in humid air proceeded through the formation of primary products retaining a carbon-carbon (C-C) bond such as chloroacetyl chlorides and chloroacetyl aldehyde as well as that of primary products of COCl 2 and HCOCl through C-C bond cleavage. Chloroethylenes having one carbon bonded to two Cl atoms was decomposed into the primary products retaining a C-C bond prior to breaking a C-C bond. The number of Cl atoms of a chloroethylene molecule enhanced the formation ratio of primary products retaining a C-C bond. On the other hand, chloroethylene having two carbons bonded to one Cl atom was degraded thought the scission of a C-C bond predominantly C-C bond maintenance. (author)

  4. MUCH Electronic Publishing Environment: Principles and Practices.

    Science.gov (United States)

    Min, Zheng; Rada, Roy

    1994-01-01

    Discusses the electronic publishing system called Many Using and Creating Hypermedia (MUCH). The MUCH system supports collaborative authoring; reuse; formatting and printing; management; hypermedia publishing and delivery; and interchange. This article examines electronic publishing environments; the MUCH environment; publishing activities; and…

  5. ANALYSIS OF THE PRACTICE OF CORRUPTION IN ELECTRONIC PROCUREMENT SERVICE SYSTEM IN THE KEPULAUAN RIAU PROVINCE

    Directory of Open Access Journals (Sweden)

    Rendra Setyadiharja

    2017-10-01

    Full Text Available Procurement of goods and services in Indonesia has carried out a number of reforms, ranging from conventional forms filled with indications of bribery and corrupt, now converted into a system of procurement of goods and services electronically with Electronic Procurement Service Systems(LPSE.Expectations the central government and local government is to minimize the occurrence of graft, a fictitious project, mark up or transactional in the procurement of goods and services, but also LPSE system has never been separated from the threat of any indication of corruption in the procurement of goods and services. The purpose of this research was to uncover a number of corrupt practices that occur on the LPSE system in Kepulauan Riau Province. The method used was the exploratory qualitative approach. Data collection method used is by interview (indebt interview. The results of this research are descriptions of cases of corruption in the LPSE system in Kepulauan Riau Province, and the mode of operation corruption practices that occur in the LPSE system in Kepulauan Riau province.

  6. INTEGRATIVE PROPERTIES OF LIBRARY FUNCTIONS: IMPLEMENTATION IN THE EDUCATIONAL ELECTRONIC ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Т. Л. Бірюкова

    2017-02-01

    In our opinion, the use of distance education programs primarily to build interaction of educational and library establishments in the electronic environment. To achieve this goal, through the interaction of the system Library Education created and signed to the practice of teaching subjects at the Documentation and information activities department Odessa National Polytechnic University methodological development, there are student groups whose work promotes the assimilation of theoretical material in practice, just in the information institution, adapting to the professional environment, provided the possibility of passing the full production and pre-diploma practice.

  7. How to successfully select and implement electronic health records (EHR) in small ambulatory practice settings.

    Science.gov (United States)

    Lorenzi, Nancy M; Kouroubali, Angelina; Detmer, Don E; Bloomrosen, Meryl

    2009-02-23

    Adoption of EHRs by U.S. ambulatory practices has been slow despite the perceived benefits of their use. Most evaluations of EHR implementations in the literature apply to large practice settings. While there are similarities relating to EHR implementation in large and small practice settings, the authors argue that scale is an important differentiator. Focusing on small ambulatory practices, this paper outlines the benefits and barriers to EHR use in this setting, and provides a "field guide" for these practices to facilitate successful EHR implementation. The benefits of EHRs in ambulatory practices include improved patient care and office efficiency, and potential financial benefits. Barriers to EHRs include costs; lack of standardization of EHR products and the design of vendor systems for large practice environments; resistance to change; initial difficulty of system use leading to productivity reduction; and perceived accrual of benefits to society and payers rather than providers. The authors stress the need for developing a flexible change management strategy when introducing EHRs that is relevant to the small practice environment; the strategy should acknowledge the importance of relationship management and the role of individual staff members in helping the entire staff to manage change. Practice staff must create an actionable vision outlining realistic goals for the implementation, and all staff must buy into the project. The authors detail the process of implementing EHRs through several stages: decision, selection, pre-implementation, implementation, and post-implementation. They stress the importance of identifying a champion to serve as an advocate of the value of EHRs and provide direction and encouragement for the project. Other key activities include assessing and redesigning workflow; understanding financial issues; conducting training that is well-timed and meets the needs of practice staff; and evaluating the implementation process. The EHR

  8. How to successfully select and implement electronic health records (EHR in small ambulatory practice settings

    Directory of Open Access Journals (Sweden)

    Detmer Don E

    2009-02-01

    Full Text Available Abstract Background Adoption of EHRs by U.S. ambulatory practices has been slow despite the perceived benefits of their use. Most evaluations of EHR implementations in the literature apply to large practice settings. While there are similarities relating to EHR implementation in large and small practice settings, the authors argue that scale is an important differentiator. Focusing on small ambulatory practices, this paper outlines the benefits and barriers to EHR use in this setting, and provides a "field guide" for these practices to facilitate successful EHR implementation. Discussion The benefits of EHRs in ambulatory practices include improved patient care and office efficiency, and potential financial benefits. Barriers to EHRs include costs; lack of standardization of EHR products and the design of vendor systems for large practice environments; resistance to change; initial difficulty of system use leading to productivity reduction; and perceived accrual of benefits to society and payers rather than providers. The authors stress the need for developing a flexible change management strategy when introducing EHRs that is relevant to the small practice environment; the strategy should acknowledge the importance of relationship management and the role of individual staff members in helping the entire staff to manage change. Practice staff must create an actionable vision outlining realistic goals for the implementation, and all staff must buy into the project. The authors detail the process of implementing EHRs through several stages: decision, selection, pre-implementation, implementation, and post-implementation. They stress the importance of identifying a champion to serve as an advocate of the value of EHRs and provide direction and encouragement for the project. Other key activities include assessing and redesigning workflow; understanding financial issues; conducting training that is well-timed and meets the needs of practice staff

  9. The Contributions of Organisational and Technological Practices to the Speedup of New Product Development

    Science.gov (United States)

    Sun, Hongyi

    2007-01-01

    Based on data from 700 companies in 20 countries, this paper records the research that investigates the contribution of organisational and technological practices to speed up New Product Development (NPD). The organisational practice is found positively correlated with the speed of NPD. However, no significant direct relationship was found between…

  10. Production of high-quality electron bunches by dephasing and beam loading in channeled and unchanneled laser plasma accelerators

    International Nuclear Information System (INIS)

    Geddes, C.G.R.; Toth, Cs.; Tilborg, J. van; Esarey, E.; Schroeder, C.B.; Bruhwiler, D.; Nieter, C.; Cary, J.; Leemans, W.P.

    2005-01-01

    High-quality electron beams, with a few 10 9 electrons within a few percent of the same energy above 80 MeV, were produced in a laser wakefield accelerator by matching the acceleration length to the length over which electrons were accelerated and outran (dephased from) the wake. A plasma channel guided the drive laser over long distances, resulting in production of the high-energy, high-quality beams. Unchanneled experiments varying the length of the target plasma indicated that the high-quality bunches are produced near the dephasing length and demonstrated that channel guiding was more stable and efficient than relativistic self-guiding. Consistent with these data, particle-in-cell simulations indicate production of high-quality electron beams when trapping of an initial bunch of electrons suppresses further injection by loading the wake. The injected electron bunch is then compressed in energy by dephasing, when the front of the bunch begins to decelerate while the tail is still accelerated

  11. The impact of workplaces and self-management practices on the productivity of knowledge workers

    NARCIS (Netherlands)

    Palvalin, M.O.; van der Voordt, Theo; Jylhä, T.E.

    2017-01-01

    Purpose: This paper aims to explore the impact of workplaces, which support concentration and communication, and self-management practices on individual and team productivity. The underlying hypothesis is that the impact of these variables on the two levels of productivity (individual and team)

  12. BEST PRACTICES IN NEW PRODUCT DEVELOPMENT: THE ZYRAY WIRELESS CASE STUDY

    Directory of Open Access Journals (Sweden)

    P. Koekemoer

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Successful high-tech start-up companies are rare. This case study investigates the New Product Development (NPD process of Zyray Wireless, a very successful startup 3G technology company that originated in South Africa but relocated to California in the USA. The research looked into the differences between generally accepted NPD best practices and those implemented by this start-up company. Zyray Wireless scored above the industry average in the following categories: customer involvement, project selection, product strategy, technological leadership, and product goal. The best practices for metrics, human resource development, documentation, and change control implemented by Zyray Wireless scored at or below the industry average. The best practice results showed that this very successful start-up company focused more on strategy and engineering and less on process control than average.

    AFRIKAANSE OPSOMMING: Suksesvolle nuwe hoë-tegnologie maatskappye is skaars. Hierdie gevallestudie het die Nuwe Produk Ontwikkelingproses (NPO ondersoek van Zyray Wireless, ʼn baie suksesvolle nuwe maatskappy wat in Suid-Afrika ontstaan het maar na Kalifornië in die VSA verskuif is. Die navorsing het na die verskille gekyk tussen algemeen aanvaarde NPO beste praktyke en dié wat deur hierdie maatskappy geïmplementeer is. Zyray Wireless het bo die industriegemiddelde gepresteer in die volgende kategorieë: kliëntbetrokkenheid, projekkeuse, produkstrategie, tegnologiese leierskap, en produkdoelwitte. Die beste praktyke vir maatstawwe, menslike hulpbronontwikkeling, dokumentasie, en veranderingsbeheer wat deur Zyray Wireless geïmplementeer is, het onder die industriegemiddeldes gepresteer. Die beste praktykresultate het getoon dat hierdie baie suksesvolle nuwe maatskappy meer gefokus het op strategie en ingenieurswese en minder op prosesbeheer as die gemiddelde.

  13. The establishment of good irradiation practice for insect disinfestation of cereal grain products

    International Nuclear Information System (INIS)

    Lin Yin; Liu Hongyue; Li Xiangling; Shi Peixin

    2001-01-01

    According to the reference data and test results, the parameters and technicality of good irradiation practice (GIP) were established as follows: (1) the moisture level of grain products should be < 12% for pre-irradiation treatment of grains, and pupae and adult stages insects should not exist in the products; (2) grain products should be irradiated immediately after packing; (3) the minimum effective dose for insect disinfestation is 0.3 kGy and the maximum tolerant doses for different cereal grains products are 0.5 ∼ 0.8 kGy. (authors)

  14. Bio-Nano ECRIS: An electron cyclotron resonance ion source for new materials production

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, T. [Bio-Nano Electronics Research Centre, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Minezaki, H. [Graduate School of Engineering, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Tanaka, K.; Asaji, T. [Tateyama Machine Co., Ltd., 30 Shimonoban, Toyama, Toyama 930-1305 (Japan); Muramatsu, M.; Kitagawa, A. [National Institute of Radiological Sciences (NIRS), 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan); Biri, S. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem Ter 18/c (Hungary); Yoshida, Y. [Bio-Nano Electronics Research Centre, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan); Graduate School of Engineering, Toyo University, 2100, Kujirai, Kawagoe, Saitama 350-8585 (Japan)

    2010-02-15

    We developed an electron cyclotron resonance ion source (ECRIS) for new materials production on nanoscale. Our main target is the endohedral fullerenes, which have potential in medical care, biotechnology, and nanotechnology. In particular, iron-encapsulated fullerene can be applied as a contrast material for magnetic resonance imaging or microwave heat therapy. Thus, our new ECRIS is named the Bio-Nano ECRIS. In this article, the recent progress of the development of the Bio-Nano ECRIS is reported: (i) iron ion beam production using induction heating oven and (ii) optimization of singly charged C{sub 60} ion beam production.

  15. Purification of coal fired boiler flue gas and fertilizer production by using electron beam

    International Nuclear Information System (INIS)

    Maezawa, Akihiko

    1996-01-01

    Electron beam irradiation technology which is applied in electron accelerators is used in a variety of fields, including industry, medicine and etc.. In collaboration with the Japan Atomic Energy Research Institute, Ebara Corporation has developed a novel flue-gas treatment process by making use of the electron beam for the purification of flue gas emitted from industrial plant such as thermal power station. The E-beam flue gas treatment process (EBA Process) is applied to clean flue gas generated in the combustion of coal containing sulfur oxides (SOx) and nitrogen oxides (NOx), which are chemical pollutants responsible for acid rain. As a by-product of this process, ammonium sulfate and ammonium nitrate mixture is obtained. This mixture can be recovered from the process as a valuable fertilizer to promote the growth of agricultural produce. The EBA process thus serves two important purposes at the same time: It helps prevent environmental pollution and produces a fertilizer that is vitally important for increasing food production to meet the world's future population growth. (J.P.N.)

  16. Biohydrogen production: prospects and limitations to practical application

    Energy Technology Data Exchange (ETDEWEB)

    Levin, D.B. [Univ. of Victoria, Dept. of Biology and Inst. for Integrated Energy Systems, Victoria, British Columbia (Canada); Pitt, L.; Love, M. [Univ. of Victoria, Inst. for Integrated Energy Systems, Victoria, British Columbia (Canada)

    2003-07-01

    Hydrogen may be produced by a number of processes, including electrolysis of water, thermocatalytic reformation of hydrogen rich organic compounds, and biological processes. Currently, hydrogen is produced, almost exclusively, by electrolysis of water or by steam reformation of methane. Biological production of hydrogen (Biohydrogen) technologies provide a wide range of approaches to generate hydrogen, including Direct biophotolysis, Indirect Biophotolysis, Photo-fermentations, and Dark-fermentation. The practical application of these technologies to every day energy problems, however, is unclear. In order to assess which biohydrogen systems may be practical when combined with fuel cell technologies, we have calculated the size of biohydrogen bioreactors that would be required to power Proton Exchange Membrane (PEM) Fuel Cells of various sizes. Our analysis suggests that light-driven biohydrogen systems (Direct Photolysis, Indirect Photolysis, and Photo-fermentation) do not produce H{sub 2} at rates that are sufficient to power PEMFCs of sufficient size to be of practical use. Thermophilic and extreme thermophilic biohydrogen systems would require very large bioreactors (in the range of approximately 2900 L to 14,600 L) to provide sufficient H{sub 2} to power PEMFCs of 1.5 kW to 5.0 kW, respectively. Some Dark-fermentation systems, however, appear promising. Bioreactors of 500 L and 1000 L, designed so that H{sub 2} is rapidly removed from the culture medium, would be sufficient to power PEMFCs of 2.5 kW and 5.0 kW, respectively. Further research and development aimed at increasing rates of synthesis and final yields of H{sub 2} are essential if biohydrogen systems are to be of practical use. (author)

  17. Biohydrogen production: prospects and limitations to practical application

    International Nuclear Information System (INIS)

    Levin, D.B.; Pitt, L.; Love, M.

    2003-01-01

    Hydrogen may be produced by a number of processes, including electrolysis of water, thermocatalytic reformation of hydrogen rich organic compounds, and biological processes. Currently, hydrogen is produced, almost exclusively, by electrolysis of water or by steam reformation of methane. Biological production of hydrogen (Biohydrogen) technologies provide a wide range of approaches to generate hydrogen, including Direct biophotolysis, Indirect Biophotolysis, Photo-fermentations, and Dark-fermentation. The practical application of these technologies to every day energy problems, however, is unclear. In order to assess which biohydrogen systems may be practical when combined with fuel cell technologies, we have calculated the size of biohydrogen bioreactors that would be required to power Proton Exchange Membrane (PEM) Fuel Cells of various sizes. Our analysis suggests that light-driven biohydrogen systems (Direct Photolysis, Indirect Photolysis, and Photo-fermentation) do not produce H 2 at rates that are sufficient to power PEMFCs of sufficient size to be of practical use. Thermophilic and extreme thermophilic biohydrogen systems would require very large bioreactors (in the range of approximately 2900 L to 14,600 L) to provide sufficient H 2 to power PEMFCs of 1.5 kW to 5.0 kW, respectively. Some Dark-fermentation systems, however, appear promising. Bioreactors of 500 L and 1000 L, designed so that H 2 is rapidly removed from the culture medium, would be sufficient to power PEMFCs of 2.5 kW and 5.0 kW, respectively. Further research and development aimed at increasing rates of synthesis and final yields of H 2 are essential if biohydrogen systems are to be of practical use. (author)

  18. Small Business Apparel Retailing in Jamaica: An Exploratory Investigation into Product Development Processes and Practices

    Science.gov (United States)

    Johnson-Leslie, Natalie; Gaskill, LuAnn R.

    2006-01-01

    While the process and practices of retail product development in developed countries have been documented, a void exists in descriptive analysis regarding retail product development in an international setting. The primary purpose of this study was to explore small business apparel retailing, and specifically the retail product development process…

  19. Sustainable packaging design for consumer electronics products : Balancing marketing, logistics and environmental requirements

    NARCIS (Netherlands)

    Wever, R.; Boks, C.B.; Pratama, I.; Stevels, A.L.N.

    2007-01-01

    Packaging design for consumer electronic products is a challenge because contradictory demands from a distribution perspective and a marketing perspective have to be balanced. With several company departments involved and powerful external stakeholders this is a complicated matter. As the level of

  20. PREVAIL-EPL alpha tool electron optics subsystem

    Science.gov (United States)

    Pfeiffer, Hans C.; Dhaliwal, Rajinder S.; Golladay, Steven D.; Doran, Samuel K.; Gordon, Michael S.; Kendall, Rodney A.; Lieberman, Jon E.; Pinckney, David J.; Quickle, Robert J.; Robinson, Christopher F.; Rockrohr, James D.; Stickel, Werner; Tressler, Eileen V.

    2001-08-01

    The IBM/Nikon alliance is continuing pursuit of an EPL stepper alpha tool based on the PREVAIL technology. This paper provides a status report of the alliance activity with particular focus on the Electron Optical Subsystem developed at IBM. We have previously reported on design features of the PREVAIL alpha system. The new state-of-the-art e-beam lithography concepts have since been reduced to practice and turned into functional building blocks of a production level lithography tool. The electron optical alpha tool subsystem has been designed, build, assembled and tested at IBM's Semiconductor Research and Development Center (SRDC) in East Fishkill, New York. After demonstrating subsystem functionality, the electron optical column and all associated control electronics hardware and software have been shipped during January 2001 to Nikon's facility in Kumagaya, Japan, for integration into the Nikon commercial e-beam stepper alpha tool. Early pre-shipment results obtained with this electron optical subsystem are presented.

  1. Radiative corrections to chargino production in electron-positron collisions with polarized beams

    International Nuclear Information System (INIS)

    Diaz, Marco A.; King, Stephen F.; Ross, Douglas A.

    2001-01-01

    We study radiative corrections to chargino production at linear colliders with polarized electron beams. We calculate the one-loop corrected cross sections for polarized electon beams due to three families of quarks and squarks, working in the {ovr MS} scheme, extending our previous calculation of the unpolarized cross section with one-loop corrections due to the third family of quarks and squarks. In some cases we find rather large corrections to the tree-level cross sections. For example, for the case of right-handed polarized electrons and large tanβ the corrections can be of order 30%, allowing sensitivity to the squark mass parameters

  2. Cross section formulae on single W and Z boson productions in electron-positron collisions

    International Nuclear Information System (INIS)

    Katuya, Mituaki

    1987-01-01

    The formulae are given for the transverse momentum distributions and total cross sections for the single W boson and Z boson productions in electron-positron collisions by using the equivalent photon approximation. (author)

  3. The transgenosis main directions in vegetable and melon production: theory and practice

    Directory of Open Access Journals (Sweden)

    Н. В. Лещук

    2013-08-01

    Full Text Available The article deals with priority directions of vegetable and melon plants selection. The wide varieties of alien genetic information transferring methods during the transgenic plants creation of vegetable and melon species are grounded. The essence of the new hybrids identification method as genetic engineering products: kind of cabbage, tomatoes, carrots, zucchini, lettuce seed, pea Pisum sativum, common bean, eggplant and capsicum is revealed. The transgenosis main directions of botanical taxa varieties of vegetable and melon plants on condition of the international and national practice holding are proved. The international practice of the state approbation and registration of genetically engineered structures in biological objects (plant varieties and in their processed products are studied. A monitoring about food and pharmaceutical substances based on genetically modified varieties and hybrids structures of vegetable and melon plants have been held.

  4. Defense programs business practices re-engineering QFD exercise

    International Nuclear Information System (INIS)

    Murray, C.; Halbleib, L.

    1996-03-01

    The end of the cold war has resulted in many changes for the Nuclear Weapons Complex (NWC). We now work in a smaller complex, with reduced resources, a smaller stockpile, and no new phase 3 weapons development programs. This new environment demands that we re-evaluate the way we design and produce nuclear weapons. The Defense Program (DP) Business Practices Re-engineering activity was initiated to improve the design and production efficiency of the DP Sector. The activity had six goals: (1) to identify DP business practices that are exercised by the Product Realization Process (PRP); (2) to determine the impact (positive, negative, or none) of these practices on defined, prioritized customer criteria; (3) to identify business practices that are candidates for elimination or re-engineering; (4) to select two or three business practices for re-engineering; (5) to re-engineer the selected business practices; and (6) to exercise the re-engineered practices on three pilot development projects. Business practices include technical and well as administrative procedures that are exercised by the PRP. A QFD exercise was performed to address (1)-(4). The customer that identified, defined, and prioritized the criteria to rate the business practices was the Block Change Advisory Group. Five criteria were identified: cycle time, flexibility, cost, product performance/quality, and best practices. Forty-nine business practices were identified and rated per the criteria. From this analysis, the group made preliminary recommendations as to which practices would be addressed in the re-engineering activity. Sixteen practices will be addressed in the re-engineering activity. These practices will then be piloted on three projects: (1) the Electronic Component Assembly (ECA)/Radar Project, (2) the B61 Mod 11, and (3) Warhead Protection Program (WPP)

  5. Electron reconstruction and calibration with single Z and W production in CMS at the LHC

    CERN Document Server

    Rovelli, Chiara

    2006-01-01

    The CMS experiment at the LHC is building an electromagnetic calorimeter with high performance. Preserving high reconstruction efficiency and best four momentum measurements for electrons is a necessity for optimal discovery prospects in the ZZ(*) and WW(*) Higgs boson decay channels. This is challenging in view of the material budget in front of ECAL and of the presence of a strong magnetic field. A new reconstruction strategy for electrons in CMS is described. The usage of electrons from single Z and W production for the ECAL calibration strategy is also discussed.

  6. Protecting the privacy of individual general practice patient electronic records for geospatial epidemiology research.

    Science.gov (United States)

    Mazumdar, Soumya; Konings, Paul; Hewett, Michael; Bagheri, Nasser; McRae, Ian; Del Fante, Peter

    2014-12-01

    General practitioner (GP) practices in Australia are increasingly storing patient information in electronic databases. These practice databases can be accessed by clinical audit software to generate reports that inform clinical or population health decision making and public health surveillance. Many audit software applications also have the capacity to generate de-identified patient unit record data. However, the de-identified nature of the extracted data means that these records often lack geographic information. Without spatial references, it is impossible to build maps reflecting the spatial distribution of patients with particular conditions and needs. Links to socioeconomic, demographic, environmental or other geographically based information are also not possible. In some cases, relatively coarse geographies such as postcode are available, but these are of limited use and researchers cannot undertake precision spatial analyses such as calculating travel times. We describe a method that allows researchers to implement meaningful mapping and spatial epidemiological analyses of practice level patient data while preserving privacy. This solution has been piloted in a diabetes risk research project in the patient population of a practice in Adelaide. The method offers researchers a powerful means of analysing geographic clinic data in a privacy-protected manner. © 2014 Public Health Association of Australia.

  7. Analysis of the effect of risk management practices on the performance of new product development programs

    DEFF Research Database (Denmark)

    Oehmen, Josef; Olechowski, Alison; Kenley, C. Robert

    2014-01-01

    Risk management is receiving much attention, as it is seen as a method to improve cost, schedule, and technical performance of new product development programs. However, there is a lack of empirical research that investigates the effective integration of specific risk management practices proposed...... skills and resources; (2) Tailor risk management to and integrate it with new product development; (3) Quantify impacts of risks on your main objectives; (4) Support all critical decisions with risk management results; (5) Monitor and review your risks, risk mitigation actions, and risk management...... by various standards with new product development programs and their association with various dimensions of risk management success. Based on a survey of 291 product development programs, this paper investigates the association of risk management practices with five categories of product development program...

  8. Potential to Improve the Competitiveness of China's Electronic and Mechanical Products Exports

    Institute of Scientific and Technical Information of China (English)

    Wei Hao; Wang Xi; Wang Luxi

    2010-01-01

    @@ Since launching the reform and opening policy,and particularly since the mid-1990s with accelerating industrialization processes and further policy changes,the electronics and mechanical industry in China has made huge strides in production and foreign trade value,now accounting for approximately half of total exports from China and becoming a pillar industry of China's foreign trade.

  9. Use of a MS-electronic nose for prediction of early fungal spoilage of bakery products.

    Science.gov (United States)

    Marín, S; Vinaixa, M; Brezmes, J; Llobet, E; Vilanova, X; Correig, X; Ramos, A J; Sanchis, V

    2007-02-28

    A MS-based electronic nose was used to detect fungal spoilage (measured as ergosterol concentration) in samples of bakery products. Bakery products were inoculated with different Eurotium, Aspergillus and Penicillium species, incubated in sealed vials and their headspace sampled after 2, 4 and 7 days. Once the headspace was sampled, ergosterol content was determined in each sample. Different electronic nose signals were recorded depending on incubation time. Both the e-nose signals and ergosterol levels were used to build models for prediction of ergosterol content using e-nose measurements. Accuracy on prediction of those models was between 87 and 96%, except for samples inoculated with Penicillium corylophilum where the best predictions only reached 46%.

  10. Forward electron production in heavy ion-atom and ion-solid collisions

    International Nuclear Information System (INIS)

    Sellin, I.A.

    1984-01-01

    A sharp cusp in the velocity spectrum of electrons, ejected in ion-atom and ion-solid collisions, is observed when the ejected electron velocity vector v/sub e/ matches that of the emergent ion vector v/sub p/ in both speed and direction. In ion-atom collisions, the electrons originate from capture to low-lying, projectile-centered continuum states (ECC) for fast bare or nearly bare projectiles, and from loss to those low-lying continuum states (ELC) when loosely bound projectile electrons are available. Most investigators now agree that ECC cusps are strongly skewed toward lower velocities, and exhibit full widths half maxima roughly proportional to v/sub p/ (neglecting target-shell effects, which are sometimes strong). A close examination of recent ELC data shows that ELC cusps are instead nearly symmetric, with widths nearly independent on v/sub p/ in the velocity range 6 to 18 a.u., a result only recently predicted by theory. Convoy electron cusps produced in heavy ion-solid collisions at MeV/u energies exhibit approximately velocity-independent widths very similar to ELC cusp widths. While the shape of the convoy peaks is approximately independent of projectile Z, velocity, and of target material, it is found that the yields in polycrystalline targets exhibit a strong dependence on projectile Z and velocity. While attempts have been made to link convoy electron production to binary ECC or ELC processes, sometimes at the last layer, or alternatively to a solid-state wake-riding model, our measured dependences of cusp shape and yield on projectile charge state and energy are inconsistent with the predictions of available theories. 10 references, 8 figures, 1 table

  11. Direct electron-pair production by high energy heavy charged particles

    Science.gov (United States)

    Takahashi, Y.; Gregory, J. C.; Hayashi, T.; Dong, B. L.

    1989-01-01

    Direct electron pain production via virtual photons by moving charged particles is a unique electro-magnetic process having a substantial dependence on energy. Most electro-magnetic processes, including transition radiation, cease to be sensitive to the incident energy above 10 TeV/AMU. Thus, it is expected, that upon establishment of cross section and detection efficiency of this process, it may provide a new energy measuring technique above 10 TeV/AMU. Three accelerator exposures of emulsion chambers designed for measurements of direct electron-pains were performed. The objectives of the investigation were to provide the fundamental cross-section data in emulsion stacks to find the best-fit theoretical model, and to provide a calibration of measurements of direct electron-pairs in emulsion chamber configurations. This paper reports the design of the emulsion chambers, accelerator experiments, microscope measurements, and related considerations for future improvements of the measurements, and for possible applications to high energy cosmic ray experiments. Also discussed are the results from scanning 56m of emulsion tracks at 1200x magnification so that scanning efficiency is optimized. Measurements of the delta-ray range spectrum were also performed for much shorter track lengths, but with sufficiently large statistics in the number of measured delta-rays.

  12. Toward best practice: leveraging the electronic patient record as a clinical data warehouse.

    Science.gov (United States)

    Ledbetter, C S; Morgan, M W

    2001-01-01

    Automating clinical and administrative processes via an electronic patient record (EPR) gives clinicians the point-of-care tools they need to deliver better patient care. However, to improve clinical practice as a whole and then evaluate it, healthcare must go beyond basic automation and convert EPR data into aggregated, multidimensional information. Unfortunately, few EPR systems have the established, powerful analytical clinical data warehouses (CDWs) required for this conversion. This article describes how an organization can support best practice by leveraging a CDW that is fully integrated into its EPR and clinical decision support (CDS) system. The article (1) discusses the requirements for comprehensive CDS, including on-line analytical processing (OLAP) of data at both transactional and aggregate levels, (2) suggests that the transactional data acquired by an OLTP EPR system must be remodeled to support retrospective, population-based, aggregate analysis of those data, and (3) concludes that this aggregate analysis is best provided by a separate CDW system.

  13. Failure analysis a practical guide for manufacturers of electronic components and systems

    CERN Document Server

    Bâzu, Marius

    2011-01-01

    Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers nee

  14. Practice Facilitator Strategies for Addressing Electronic Health Record Data Challenges for Quality Improvement: EvidenceNOW.

    Science.gov (United States)

    Hemler, Jennifer R; Hall, Jennifer D; Cholan, Raja A; Crabtree, Benjamin F; Damschroder, Laura J; Solberg, Leif I; Ono, Sarah S; Cohen, Deborah J

    2018-01-01

    Practice facilitators ("facilitators") can play an important role in supporting primary care practices in performing quality improvement (QI), but they need complete and accurate clinical performance data from practices' electronic health records (EHR) to help them set improvement priorities, guide clinical change, and monitor progress. Here, we describe the strategies facilitators use to help practices perform QI when complete or accurate performance data are not available. Seven regional cooperatives enrolled approximately 1500 small-to-medium-sized primary care practices and 136 facilitators in EvidenceNOW, the Agency for Healthcare Research and Quality's initiative to improve cardiovascular preventive services. The national evaluation team analyzed qualitative data from online diaries, site visit field notes, and interviews to discover how facilitators worked with practices on EHR data challenges to obtain and use data for QI. We found facilitators faced practice-level EHR data challenges, such as a lack of clinical performance data, partial or incomplete clinical performance data, and inaccurate clinical performance data. We found that facilitators responded to these challenges, respectively, by using other data sources or tools to fill in for missing data, approximating performance reports and generating patient lists, and teaching practices how to document care and confirm performance measures. In addition, facilitators helped practices communicate with EHR vendors or health systems in requesting data they needed. Overall, facilitators tailored strategies to fit the individual practice and helped build data skills and trust. Facilitators can use a range of strategies to help practices perform data-driven QI when performance data are inaccurate, incomplete, or missing. Support is necessary to help practices, particularly those with EHR data challenges, build their capacity for conducting data-driven QI that is required of them for participating in practice

  15. Intranet of the future: functional study, comparison of products and practical implementation

    OpenAIRE

    Bertran Ribalaygua, Ignasi

    2010-01-01

    Future intranet: functional study, comparison of products and practical implementation 1. Introduction The project has fulfilled three goals: 1) To perform a study of the functionalities which have to be covered in a modern intranet (web 2.0, unified communication, collaboration, etc) 2) To perform a comparison of tools of the market which can be used to implement intranets (commercial and open source products) 3) To test three of these tools (Oracle WebCenter, Liferay Portal and Microsoft Sh...

  16. New electron beam facility for R&D and production at acsion industries

    Science.gov (United States)

    Lopata, V. J.; Barnard, J. W.; Saunders, C. B.; Stepanik, T. M.

    2003-08-01

    Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R&D capabilities. These modifications are described in this paper.

  17. Electronic circuits fundamentals & applications

    CERN Document Server

    Tooley, Mike

    2015-01-01

    Electronics explained in one volume, using both theoretical and practical applications.New chapter on Raspberry PiCompanion website contains free electronic tools to aid learning for students and a question bank for lecturersPractical investigations and questions within each chapter help reinforce learning Mike Tooley provides all the information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The

  18. Labour productivity and innovation performance: the importance of internal labour flexibility practices

    NARCIS (Netherlands)

    Preenen, P.T.Y.; Vergeer, R.; Kraan, K.O.; Dhondt, S.

    2017-01-01

    This article develops and examines the idea that internal labour flexibility practices are beneficial for labour productivity and innovation performance of companies. This is tested in two studies using unique company level datasets. In Study 1, results obtained from 377 independent companies

  19. A practical comparison of methods to assess sum-of-products

    International Nuclear Information System (INIS)

    Rauzy, A.; Chatelet, E.; Dutuit, Y.; Berenguer, C.

    2003-01-01

    Many methods have been proposed in the literature to assess the probability of a sum-of-products. This problem has been shown computationally hard (namely no. P-hard). Therefore, algorithms can be compared only from a practical point of view. In this article, we propose first an efficient implementation of the pivotal decomposition method. This kind of algorithms is widely used in the Artificial Intelligence framework. It is unfortunately almost never considered in the reliability engineering framework, but as a pedagogical tool. We report experimental results that show that this method is in general much more efficient than classical methods that rewrite the sum-of-products under study into an equivalent sum of disjoint products. Then, we derive from our method a factorization algorithm to be used as a preprocessing method for binary decision diagrams. We show by means of experimental results that this latter approach outperforms the formers

  20. Introduction to electronics

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  1. Production of charm and beauty in e+e- with polarized electron beam

    International Nuclear Information System (INIS)

    Su, D.

    1995-09-01

    The test of the Standard Model through the measurements of Z 0 to fermion couplings can benefit from much enhanced sensitivity by using longitudinally polarized electron beams. This report reviews preliminary electroweak measurements from SLD on heavy quark production at the Z 0 , using 150,000 hadronic Z 0 decays accumulated during the 93-95 runs with high electron beam polarization. The parity violating parameters A b and A c of the Zbb and Zcc couplings are measured directly from the left-right forward-backward asymmetries. A measurement of R b with a lifetime double tag and a summary of the preliminary measurement of A LR from the 93-95 SLD data are also included in this report

  2. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, November). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presentation at ICO Fall School 2012, Girona, Spain.

  3. Práticas de leitura em meio eletrônico/Reading practices in electronic media

    Directory of Open Access Journals (Sweden)

    Leilah Santiago Bufrem

    2009-12-01

    reading; reading practices, according to medium, device, genre and accessibility. It notes that the reading is performed by the majority of students in the computer screen, or rather after printing its contents on paper, which corroborates statements gathered from the literature. As for e-book reading devices, most students does not know them, and those who know have never purchased one. Concerning the time spent in reading, it ratifies what has been verified in other researches on this practice, that is, the student spends little time in reading, an average of 6.5 hours per week among master degree students, and 3.67 among undergraduates, in an index that points out to every kind of reading and medium, both on paper or electronic. It concludes that although it is still not frequently used and is even disregarded, the electronic book is an object of evident expectancies of improvement, while the publisher companies innovate and develop services and products that are compatible with the evolution in this field, trying to supply the demand for alternative publishing formats.

  4. Evaluating Lignite-Derived Products (LDPs) for Agriculture - Does Research Inform Practice?

    Science.gov (United States)

    Patti, Antonio; Rose, Michael; Little, Karen; Jackson, Roy; Cavagnaro, Timothy

    2014-05-01

    Lignite-derived products (LDPs), including humic acids and organo-mineral soil conditioners, are being marketed in many parts of the world. They are promoted as plant growth stimulants, additives that improve plant nutrient uptake as well as providing humic materials to improve soil structure and combat soil degradation. There are mixed views regarding the efficacy of these products and there is a lack of scientific studies that verify the efficacy of these products in the field. Anecdotally, agricultural producers become repeat users of the products when they see economic benefits, such as increases in crop yields, while others abandon repeat use when no benefits were seen. In this paper, we present results from a literature meta-analysis1 and a number of field studies that examine the potential for LDPs to improve soil fertility and plant growth. Our findings suggest that complex interactions between LDPs, soil types, environmental conditions and plant species mean that a 'one-size fits all' product or solution is unlikely; and that changes to soil characteristics brought about by LDPs are more apparent over longer time periods than a single cropping season. Most of these studies have not been undertaken in full field trial conditions, where the crop has been grown to harvest. Limited studies in small plots or glass-house conditions often report early benefits. It is not known if these benefits persist. Moreover, the actual composition of these additives may vary significantly and is rarely specified in full. In a study of our own, a small plot experiment evaluated the effect of a single application of a commercial potassium humate product from Victorian lignite on ryegrass and lucerne grown in a sandy, nutrient deficient, low organic matter soil. Treatment resulted in increased shoot growth (up to 33%) of ryegrass during the pasture establishment phase. Root growth was also improved with a 47% increase at 0-10 cm depth and 122% increase at 10-30 cm depth

  5. Adverse Event extraction from Structured Product Labels using the Event-based Text-mining of Health Electronic Records (ETHER)system.

    Science.gov (United States)

    Pandey, Abhishek; Kreimeyer, Kory; Foster, Matthew; Botsis, Taxiarchis; Dang, Oanh; Ly, Thomas; Wang, Wei; Forshee, Richard

    2018-01-01

    Structured Product Labels follow an XML-based document markup standard approved by the Health Level Seven organization and adopted by the US Food and Drug Administration as a mechanism for exchanging medical products information. Their current organization makes their secondary use rather challenging. We used the Side Effect Resource database and DailyMed to generate a comparison dataset of 1159 Structured Product Labels. We processed the Adverse Reaction section of these Structured Product Labels with the Event-based Text-mining of Health Electronic Records system and evaluated its ability to extract and encode Adverse Event terms to Medical Dictionary for Regulatory Activities Preferred Terms. A small sample of 100 labels was then selected for further analysis. Of the 100 labels, Event-based Text-mining of Health Electronic Records achieved a precision and recall of 81 percent and 92 percent, respectively. This study demonstrated Event-based Text-mining of Health Electronic Record's ability to extract and encode Adverse Event terms from Structured Product Labels which may potentially support multiple pharmacoepidemiological tasks.

  6. Electron-positron pair production in a hot accretion plasma around a massive black hole

    International Nuclear Information System (INIS)

    Takahara, Fumio; Kusunose, Masaaki.

    1985-01-01

    We investigate the electron-positron pair production in a hot accretion plasma around a supermassive black hole in connection with active galactic nuclei. Assuming that an optically thin two-temperature plasma is produced in the vicinity of the central black hole, we examine the condition for the significant pair production by comparing relevant time scales. Since the pair production is dominated by collisions between hard photons, the conditions for significant pair production depend on the production rate of hard photons. We examine the case where the unsaturated Comptonization of soft photons produces hard photons as well as that of bremsstrahlung. We show that significant pair production occurs for a moderately high accretion rate with relatively slow accretion flow as compared to the free fall velocity in both cases. Possible consequences of pair production are briefly discussed. (author)

  7. Neutron production in the interaction of electrons with a dispersing lamella; Produccion de neutrones en la interaccion de electrones con una laminilla dispersora

    Energy Technology Data Exchange (ETDEWEB)

    Soto B, T. G.; Baltazar R, A.; Medina C, D.; Vega C, H. R., E-mail: tzinnia.soto@gmail.com [Universidad Autonoma de Zacatecas, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas, Zac. (Mexico)

    2017-10-15

    When a Linac for radiotherapy operates with acceleration voltages greater than 8 MV, neutrons are produced as secondary radiation. They deposit an undesirable and not negligible dose in the patient. Depending on the type of tumor, its location in the body and the characteristics of the patient, cancer treatment with a Linac is done with photon or electron beams, which produce neutrons through reactions (γ, n) and e, e n) respectively. Because the effective section of the reaction (n, γ) is 137 times greater than the reaction (e, e n), most studies have focused on photo neutrons. When a Linac operates with electron beams, the beam that leaves the magnetic baffle is incised in the dispersion foil in order to cause quasi-elastic interactions and expand the spatial distribution of the electrons; in their interaction with the lamella the electrons produce photons and these in turn produce neutrons. Due to the radiobiological efficiency of neutrons and the ways in which they interact with matter, is important to determine the neutrons production in Linacs operating in electron mode. The objective of this work is to determine the characteristics of photons and neutrons that occur when a beam of mono-energetic electrons of 2 mm in diameter (pencil beam) is made to impinge on a tungsten lamella of 1 cm in diameter and 0.5 mm thick located in the center of a 10 cm thick tungsten shell, used to represent the accelerator head. The study was carried out using the Monte Carlo method with the MCNP6 code for electron beams of 12 and 18 MeV. The spectra of photons and neutrons were estimated in 6 point detectors, four were placed in different points equidistant from the center of the lamella and the other two were located at 50 cm and 1 m from the electron beam, simulating the totally closed head. In this work it was found that when a Linac operates with an electron beam of 12 or 18 MeV there is neutron production mainly in the head and in the direction of the beam. (Author)

  8. Conservation Agriculture Practices in Rainfed Uplands of India Improve Maize-Based System Productivity and Profitability

    Science.gov (United States)

    Pradhan, Aliza; Idol, Travis; Roul, Pravat K.

    2016-01-01

    Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift toward more sustainable cropping systems such as conservation agriculture production systems (CAPSs) may help in maintaining soil quality as well as improving crop production and farmer’s net economic benefit. This research assessed the effects over 3 years (2011–2014) of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation, i.e., minimum tillage, maize–cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e., conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs. PMID:27471508

  9. Conservation agriculture practices in rainfed uplands of India improve maize-based system productivity and profitability

    Directory of Open Access Journals (Sweden)

    Aliza Pradhan

    2016-07-01

    Full Text Available Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift towards more sustainable cropping systems such as conservation agriculture production systems (CAPS may help in maintaining soil quality as well as improving crop production and farmer’s net economic benefit. This research assessed the effects over three years (2011-2014 of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation i.e. minimum tillage, maize-cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e. conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs.

  10. Conservation Agriculture Practices in Rainfed Uplands of India Improve Maize-Based System Productivity and Profitability.

    Science.gov (United States)

    Pradhan, Aliza; Idol, Travis; Roul, Pravat K

    2016-01-01

    Traditional agriculture in rainfed uplands of India has been experiencing low agricultural productivity as the lands suffer from poor soil fertility, susceptibility to water erosion and other external pressures of development and climate change. A shift toward more sustainable cropping systems such as conservation agriculture production systems (CAPSs) may help in maintaining soil quality as well as improving crop production and farmer's net economic benefit. This research assessed the effects over 3 years (2011-2014) of reduced tillage, intercropping, and cover cropping practices customized for maize-based production systems in upland areas of Odisha, India. The study focused on crop yield, system productivity and profitability through maize equivalent yield and dominance analysis. Results showed that maize grain yield did not differ significantly over time or among CAPS treatments while cowpea yield was considered as an additional yield in intercropping systems. Mustard and horsegram grown in plots after maize cowpea intercropping recorded higher grain yields of 25 and 37%, respectively, as compared to those without intercropping. Overall, the full CAPS implementation, i.e., minimum tillage, maize-cowpea intercropping and mustard residue retention had significantly higher system productivity and net benefits than traditional farmer practices, i.e., conventional tillage, sole maize cropping, and no mustard residue retention. The dominance analysis demonstrated increasing benefits of combining conservation practices that exceeded thresholds for farmer adoption. Given the use of familiar crops and technologies and the magnitude of yield and income improvements, these types of CAPS should be acceptable and attractive for smallholder farmers in the area. This in turn should support a move toward sustainable intensification of crop production to meet future household income and nutritional needs.

  11. Activity Analysis: Bridging the Gap between Production Economics Theory and Practical Farm Management Procedures

    OpenAIRE

    Longworth, John W.; Menz, Kenneth M.

    1980-01-01

    This paper is addressed to the traditional problem of demonstrating the relevance of production theory to management-oriented people. Activity analysis, it is argued, is the most appropriate pedagogic framework within which to commence either a production economics or a farm management course. Production economics theory has not been widely accepted as a useful method for the analysis of practical management problems. The theory has been traditionally presented in terms of continuous function...

  12. Interactive effects among ecosystem services and management practices on crop production: pollination in coffee agroforestry systems.

    Science.gov (United States)

    Boreux, Virginie; Kushalappa, Cheppudira G; Vaast, Philippe; Ghazoul, Jaboury

    2013-05-21

    Crop productivity is improved by ecosystem services, including pollination, but this should be set in the context of trade-offs among multiple management practices. We investigated the impact of pollination services on coffee production, considering variation in fertilization, irrigation, shade cover, and environmental variables such as rainfall (which stimulates coffee flowering across all plantations), soil pH, and nitrogen availability. After accounting for management interventions, bee abundance improved coffee production (number of berries harvested). Some management interventions, such as irrigation, used once to trigger asynchronous flowering, dramatically increased bee abundance at coffee trees. Others, such as the extent and type of tree cover, revealed interacting effects on pollination and, ultimately, crop production. The effects of management interventions, notably irrigation and addition of lime, had, however, far more substantial positive effects on coffee production than tree cover. These results suggest that pollination services matter, but managing the asynchrony of flowering was a more effective tool for securing good pollination than maintaining high shade tree densities as pollinator habitat. Complex interactions across farm and landscape scales, including both management practices and environmental conditions, shape pollination outcomes. Effective production systems therefore require the integrated consideration of management practices in the context of the surrounding habitat structure. This paper points toward a more strategic use of ecosystem services in agricultural systems, where ecosystem services are shaped by the coupling of management interventions and environmental variables.

  13. A study of material composition disclosure practices in green footwear products.

    Science.gov (United States)

    Jacques, Jocelise J; Guimarães, Lia B M

    2012-01-01

    This work is based on the study of pioneering sustainable product development initiatives, and the analysis was guided by the cradle-to-cradle concept, which sees the waste of a given process as raw material for another, just like it happens in nature. Several studies on human factors have focused on factory conditions and workers dealing with product assembly. This research, however, relates more to consumer behavior, product use and end-of-life. The purchase of more environmentally- friendly products, in particular, is heavily influenced by the information made available by the companies. In this scenario, this article discusses three early but notable efforts on green product development, focusing on the disclosure practices adopted by the companies regarding the composition of their products. Research and data collection has focused on the footwear industry, whose products satisfy a basic human need and are ubiquitous worldwide. The use of hazardous materials and chemicals in shoe manufacturing, particularly the use of chromium - a highly toxic element - in addition to toxic solvents and adhesives and non-recyclable synthetic materials can pose serious risks to human health and the environment, even though the consumer usually is not aware of all the relevant characteristics of this kind of product.

  14. Production of accelerated electrons near an electron source in the plasma resonance region

    International Nuclear Information System (INIS)

    Fedorov, V.A.

    1989-01-01

    Conditions of generation of plasma electrons accelerated and their characteristics in the vicinity of an electron source are determined. The electron source isolated electrically with infinitely conducting surface, being in unrestricted collisionless plasma ω 0 >>ν, where ω 0 - plasma frequency of nonperturbated plasma, ν - frequency of plasma electron collisions with other plasma particles, is considered. Spherically symmetric injection of electrons, which rates are simulated by ω frequency, occurs from the source surface. When describing phenomena in the vicinity of the electron source, one proceeds from the quasihydrodynamic equation set

  15. Writing argumentative texts: The effects of electronic outlining on students’ writing product and process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2012-01-01

    De Smet, M. J. R., Brand-Gruwel, S., Leijten, M., & Kirschner, P. A. (2012, July). Writing argumentative texts: The effects of electronic outlining on students’ writing product and process. Paper presented at the meeting of EARLI SIG Writing, Porto, Portugal.

  16. 78 FR 34393 - Electronic Submission of Tobacco Product Applications and Other Information; Public Workshop...

    Science.gov (United States)

    2013-06-07

    .... Contact Person: Karen M. Templeton-Somers, Office of Science, Center for Tobacco Products, Food and Drug... stakeholders and interested parties, including, but not limited to, large and small pharmaceutical..., large and small pharmaceutical manufacturers with experience in electronic submissions; vendors of...

  17. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy.

    Science.gov (United States)

    Bahreyni Toossi, Mohammad Taghi; Ghorbani, Mahdi; Akbari, Fatemeh; Mehrpouyan, Mohammad; Sobhkhiz Sabet, Leila

    2016-03-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm(2) applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam's energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  18. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  19. A study of best management practices for enhancing productivity in building projects: construction methods perspectives

    OpenAIRE

    Gurmu, Argaw Tarekegn; Aibinu, Ajibade Ayodeji; Chan, Toong Khuan

    2016-01-01

    This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry...

  20. 27 CFR 73.32 - May I electronically sign forms I submit electronically to TTB?

    Science.gov (United States)

    2010-04-01

    ... AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.32 May I electronically sign forms I submit electronically to TTB? You may electronically sign the electronic form you...

  1. Review of Sorghum Production Practices: Applications for Bioenergy

    Energy Technology Data Exchange (ETDEWEB)

    Turhollow Jr, Anthony F [ORNL; Webb, Erin [ORNL; Downing, Mark [ORNL

    2010-06-01

    Sorghum has great potential as an annual energy crop. While primarily grown for its grain, sorghum can also be grown for animal feed and sugar. Sorghum is morphologically diverse, with grain sorghum being of relatively short stature and grown for grain, while forage and sweet sorghums are tall and grown primarily for their biomass. Under water-limited conditions sorghum is reliably more productive than corn. While a relatively minor crop in the United States (about 2% of planted cropland), sorghum is important in Africa and parts of Asia. While sorghum is a relatively efficient user of water, it biomass potential is limited by available moisture. The following exhaustive literature review of sorghum production practices was developed by researchers at Oak Ridge National Laboratory to document the current state of knowledge regarding sorghum production and, based on this, suggest areas of research needed to develop sorghum as a commercial bioenergy feedstock. This work began as part of the China Biofuels Project sponsored by the DOE Energy Efficiency and Renewable Energy Program to communicate technical information regarding bioenergy feedstocks to government and industry partners in China, but will be utilized in a variety of programs in which evaluation of sorghum for bioenergy is needed. This report can also be used as a basis for data (yield, water use, etc.) for US and international bioenergy feedstock supply modeling efforts.

  2. Ultrafast Electron Dynamics in Solar Energy Conversion.

    Science.gov (United States)

    Ponseca, Carlito S; Chábera, Pavel; Uhlig, Jens; Persson, Petter; Sundström, Villy

    2017-08-23

    Electrons are the workhorses of solar energy conversion. Conversion of the energy of light to electricity in photovoltaics, or to energy-rich molecules (solar fuel) through photocatalytic processes, invariably starts with photoinduced generation of energy-rich electrons. The harvesting of these electrons in practical devices rests on a series of electron transfer processes whose dynamics and efficiencies determine the function of materials and devices. To capture the energy of a photogenerated electron-hole pair in a solar cell material, charges of opposite sign have to be separated against electrostatic attractions, prevented from recombining and being transported through the active material to electrodes where they can be extracted. In photocatalytic solar fuel production, these electron processes are coupled to chemical reactions leading to storage of the energy of light in chemical bonds. With the focus on the ultrafast time scale, we here discuss the light-induced electron processes underlying the function of several molecular and hybrid materials currently under development for solar energy applications in dye or quantum dot-sensitized solar cells, polymer-fullerene polymer solar cells, organometal halide perovskite solar cells, and finally some photocatalytic systems.

  3. Managing innovation in SMEs product development in small Irish electronics firms

    CERN Document Server

    Ledwith, Ann; Bessant, John

    2009-01-01

    Innovating and developing new products is critical for the survival and growth of any small firm but particularly for technology based firms. This study of NPD at small Irish electronics firms makes two main contributions to knowledge. Firstly, the management of NPD at small firms is found to be different from that at large firms in several respects including; NPD resources and expenditure, organising for NPD, NPD process proficiency, marketing and technical skills and proficiency, R&D/marke...

  4. Effects of selected electron transport chain inhibitors on 24-h hydrogen production by Synechocystis sp. PCC 6803.

    Science.gov (United States)

    Burrows, Elizabeth H; Chaplen, Frank W R; Ely, Roger L

    2011-02-01

    One factor limiting biosolar hydrogen (H(2)) production from cyanobacteria is electron availability to the hydrogenase enzyme. In order to optimize 24-h H(2) production this study used Response Surface Methodology and Q2, an optimization algorithm, to investigate the effects of five inhibitors of the photosynthetic and respiratory electron transport chains of Synechocystis sp. PCC 6803. Over 3 days of diurnal light/dark cycling, with the optimized combination of 9.4 mM KCN (3.1 μmol 10(10) cells(-1)) and 1.5 mM malonate (0.5 μmol 10(10) cells(-1)) the H(2) production was 30-fold higher, in EHB-1 media previously optimized for nitrogen (N), sulfur (S), and carbon (C) concentrations (Burrows et al., 2008). In addition, glycogen concentration was measured over 24 h with two light/dark cycling regimes in both standard BG-11 and EHB-1 media. The results suggest that electron flow as well as glycogen accumulation should be optimized in systems engineered for maximal H(2) output. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. A venture capital view of superconductivity electronics

    International Nuclear Information System (INIS)

    Kressel, H.

    1987-01-01

    Many venture capital backed start-up companies have followed major technological innovations in recent years. However, the field of electronics based on the use of superconducting devices (i.e. the Josephson Junction) has been a noteworthy exception. Until 1983, the bulk of the American development effort on superconductivity electronics was conducted by IBM where the focus was to demonstrate the feasibility of a superconducting computer prototype. Other activities using Josephson Junctions involved the development and production of magnetic sensing instruments and modest quantities of magnetometers which were marketed by several very small companies primarily for laboratory use. In addition, other applications in radiation sensing and biomagnetism and research leading to practical systems were ongoing in several organizations

  6. Practical approach to environmental protection in the exploration and production industry

    International Nuclear Information System (INIS)

    Emmons, L.N.

    1994-01-01

    Environmental protection is a major issue throughout the world. Effective environmental protection techniques exist that are simple, creative, practical, and often cost effective. The cornerstone of cost effective environmental protection is an environmental management system. Various techniques are also available for reducing wastes, minimizing spills, remediating soils, reducing air emissions, and protecting groundwater and surface water in exploration and production operations

  7. Robert Lacoste's the darker side practical applications for electronic design concepts from circuit cellar

    CERN Document Server

    Lacoste, Robert

    2009-01-01

    Robert Lacoste's The Darker Side column has quickly become a must read among Circuit Cellar devotees. His column provides readers with succinct theoretical concepts and practical applications on topics as far reaching as digital modulation to antenna basics. Difficult concepts are demystified as Robert shines a light on complex topics within electronic design.This book collects sixteen Darker Side articles that have been enriched with new, exclusive content from the author. An intro into The Darker Side will give examples of material that can enhance and optimize the way you design. A

  8. DETERMINANTS OF QUALITY MANAGEMENT PRACTICES IN STIMULATING PRODUCT AND PROCESS INNOVATIONS

    Directory of Open Access Journals (Sweden)

    Boris Urban

    2017-12-01

    Full Text Available Research highlights Quality Management System (QMS has now become a recognizable guarantee of trust in certified business systems. A critical review of the literature reveals that empirical studies conducted to date have yielded conflicting findings on the relationship between quality management practices and innovation. This study empirically investigates how quality management principles may act as determinants of product and process innovations. The results show that customer focus and leadership explain a significant amount of product innovation, but not process innovation. Empirical support also finds that people management explains a significant amount of variance in both product innovation and process innovation. The findings highlight the importance of developing formal organisational mechanisms to measure levels of such quality determinants as they are easily overlooked or taken for granted. Moreover, firms need to recognise that innovation is a multi-faceted concept that can be controlled from a process or a product perspective, a distinction which is sometimes blurred.

  9. Practices of traditional beef farmers in their production and marketing of cattle in Zambia.

    Science.gov (United States)

    Mumba, Chisoni; Häsler, Barbara; Muma, John B; Munyeme, Musso; Sitali, Doreen Chilolo; Skjerve, Eystein; Rich, Karl M

    2018-01-01

    Understanding the practices of traditional cattle farmers in developing countries is an important factor in the development of appropriate, pro-poor disease control policies, and in formulating regional-specific production incentives that can improve productivity. This paper describes the production, husbandry practices, economics, and constraints of traditional cattle farming in Zambia. A cross-sectional study design was used to obtain data from traditional cattle farmers (n = 699) using a structured questionnaire. Data analyses were carried out using SPSS and STATA statistical packages. The results revealed that the majority [65% (95% CI: 59.3-71.1)] of farmers practised a transhumant cattle herding system under communal grazing. In these transhumant herding systems, animal husbandry and management systems were found to be of poor quality, in terms of supplementary feeding, vaccination coverage, deworming, uptake of veterinary services, usage of artificial insemination, and dip tanks all being low or absent. East Coast Fever was the most common disease, affecting 60% (95% CI: 56.4-63.7) of farmers. Cattle sales were low, as farmers only sold a median of two cattle per household per year. Crop farming was found to be the main source of farm income (47%) in agro-pastoralist communities, followed by cattle farming (28%) and other sources (25%). The median cost of production in the surveyed provinces was reported at US$316, while that of revenue from cattle and cattle products sales was estimated at US$885 per herd per year. This translates to an estimated gross margin of US$569, representing 64.3% of revenue.There is considerable diversity in disease distribution, animal husbandry practices, economics, and challenges in traditional cattle production in different locations of Zambia. Therefore, to improve the productivity of the traditional cattle sub-sector, policy makers and stakeholders in the beef value chain must develop fit-for-purpose policies and

  10. Boosting biomethane yield and production rate with graphene: The potential of direct interspecies electron transfer in anaerobic digestion.

    Science.gov (United States)

    Lin, Richen; Cheng, Jun; Zhang, Jiabei; Zhou, Junhu; Cen, Kefa; Murphy, Jerry D

    2017-09-01

    Interspecies electron transfer between bacteria and archaea plays a vital role in enhancing energy efficiency of anaerobic digestion (AD). Conductive carbon materials (i.e. graphene nanomaterial and activated charcoal) were assessed to enhance AD of ethanol (a key intermediate product after acidogenesis of algae). The addition of graphene (1.0g/L) resulted in the highest biomethane yield (695.0±9.1mL/g) and production rate (95.7±7.6mL/g/d), corresponding to an enhancement of 25.0% in biomethane yield and 19.5% in production rate. The ethanol degradation constant was accordingly improved by 29.1% in the presence of graphene. Microbial analyses revealed that electrogenic bacteria of Geobacter and Pseudomonas along with archaea Methanobacterium and Methanospirillum might participate in direct interspecies electron transfer (DIET). Theoretical calculations provided evidence that graphene-based DIET can sustained a much higher electron transfer flux than conventional hydrogen transfer. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Contingency planning for electronic health record-based care continuity: a survey of recommended practices.

    Science.gov (United States)

    Sittig, Dean F; Gonzalez, Daniel; Singh, Hardeep

    2014-11-01

    Reliable health information technology (HIT) in general, and electronic health record systems (EHRs) in particular are essential to a high-performing healthcare system. When the availability of EHRs are disrupted, alternative methods must be used to maintain the continuity of healthcare. We developed a survey to assess institutional practices to handle situations when EHRs were unavailable for use (downtime preparedness). We used literature reviews and expert opinion to develop items that assessed the implementation of potentially useful practices. We administered the survey to U.S.-based healthcare institutions that were members of a professional organization that focused on collaboration and sharing of HIT-related best practices among its members. All members were large integrated health systems. We received responses from 50 of the 59 (84%) member institutions. Nearly all (96%) institutions reported at least one unplanned downtime (of any length) in the last 3 years and 70% had at least one unplanned downtime greater than 8h in the last 3 years. Three institutions reported that one or more patients were injured as a result of either a planned or unplanned downtime. The majority of institutions (70-85%) had implemented a portion of the useful practices we identified, but very few practices were followed by all organizations. Unexpected downtimes related to EHRs appear to be fairly common among institutions in our survey. Most institutions had only partially implemented comprehensive contingency plans to maintain safe and effective healthcare during unexpected EHRs downtimes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  12. How To Compete: The Impact Of Workplace Practices And Information Technology On Productivity

    OpenAIRE

    Sandra E. Black; Lisa M. Lynch

    2001-01-01

    Using data from a unique nationally representative sample of businesses, the Educational Quality of the Workforce National Employers Survey (EQW-NES), matched with the Bureau of the Census'' Longitudinal Research Database (LRD), we examine the impact of workplace practices, information technology and human capital investments on productivity. We estimate an augmented Cobb Douglas production function with both cross section and panel data covering the period of 1987 1993 using both within and ...

  13. Neural network-based survey analysis of risk management practices in new product development

    DEFF Research Database (Denmark)

    Kampianakis, Andreas N.; Oehmen, Josef

    2017-01-01

    The current study investigates the applicability of Artificial Neural Networks (ANNs) to analyse survey data on the effectiveness of risk management practices in product development (PD) projects, and its ability to forecast project outcomes. Moreover, this study presents the relations between risk...... Neural Networks. Dataset used is a filtered survey of 291 product development programs. Answers of this survey are used as training input and target output, in pattern recognition two-layer feed forward networks, using various transfer functions. Using this method, relations among 6 project practices...... and 13 outcome metrics were revealed. Results of this analysis are compared with existent results made through statistical analysis in prior work of one of the authors. Future investigation is needed in order to tackle the lack of data and create an easy to use platform for industrial use....

  14. Practice patterns in prescribing oral care products by dental practitioners

    Directory of Open Access Journals (Sweden)

    Alena B. Abdrashitova

    2017-05-01

    Full Text Available This paper describes the practice patterns of dental practitioners in how they choose oral care products for prescriptions to their patients. One hundred seventy-three respondents were selected for a medico-sociological study. They were divided into 3 groups based on their work experience: less than 5 years (30.0%, 5–9 years (40.0% and 10–14 years (30.0%. The majority of respondents were dental therapists (71.0%, and the rest were paedodontists, dental surgeons, periodontists and orthodontists (11.0%, 7.0%, 4.0% and 1.0%, respectively. The study was conducted using a questionnaire specially developed by us, which consisted of 34 questions grouped into several domains. Analysis of the obtained results has shown that the majority of dental practitioners (88.7% were competent in prescribing oral care products. Professionals with work experience over 10 years often choose oral care products incorrectly; 80.6% of them believe that long-term use of personal oral care products containing antiseptic components affects the oral microbial flora, which suggests that it is necessary to amend the existing classification of toothpastes.

  15. Current Outlook for 99mTc Distribution Based on Electron Accelerator Production

    International Nuclear Information System (INIS)

    Benjamin L. Nelson; W. David Bence; John R. Snyder

    2007-01-01

    In 1999 a practical example illustrating the economical and reliable production of 99mTc from an accelerator was developed. It included the realistic costs involved in establishing and operating the accelerator facility and the distribution of the 99mTc to regions in Florida. However, the technology was never commercialized. Recent political and economic developments prompted this second look at accelerator produced 99mTc. The practicality of this system in 2007 dollars was established to account for inflation and current demand. The same distribution model and production schedule from the Global 1999 study were used. Numbers were found using current rates and costs where possible and indexed estimations when necessary. Though several of the costs increased significantly and the sale price remains at approximately 35 cents/mCi, the unit cost of 99mTc throughput only increased from 12.8 cents/mCi to 15.0 cents/mCi or approximately 17.2% from 1999 to 2007 thus continuing to be economically viable. This study provides ground work for creating business development models at additional locations within the U.S

  16. Electronic Signature Policy

    Science.gov (United States)

    Establishes the United States Environmental Protection Agency's approach to adopting electronic signature technology and best practices to ensure electronic signatures applied to official Agency documents are legally valid and enforceable

  17. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy

    International Nuclear Information System (INIS)

    Bahreyni Toossi, M.T.; Ghorbani, Mahdi; Akbari, Fatemah; Sabet, Leila S.; Mehrpouyan, Mohammad

    2016-01-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm 2 applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam’s energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  18. Mechanisms of electron transfer from structrual Fe(II) in reduced nontronite to oxygen for production of hydroxyl radicals

    Science.gov (United States)

    Yuan, Songhu; Liu, Xixiang; Liao, Wenjuan; Zhang, Peng; Wang, Xiaoming; Tong, Man

    2018-02-01

    Production of hydroxyl radicals (radOH) has been recently revealed upon oxygenation of sediments in redox-dynamic subsurface environments. In particular, Fe(II)-bearing clay minerals are the major sediment components contributing to radOH production upon oxygenation, and the produced radOH can oxidize contaminants and inactivate bacteria. Whereas, the mechanisms of radOH production from oxygenation of Fe(II)-bearing clay minerals remain elusive. The objectives of this study were to identify the structural variation of Fe(II) entities during the oxidation of Fe(II)-bearing clay minerals by O2, and to unravel the mechanisms of electron transfer within the mineral structure and from mineral to O2 for radOH production. Nontronite (NAu-2, 23% Fe) which was chemically reduced to 54.5% Fe(II) in total Fe was used as a model Fe(II)-bearing clay mineral. Production of radOH and oxidation of Fe(II) were measured during the oxidation of reduced NAu-2 by O2. A wide spectrum of spectroscopic techniques, including Fourier transform infrared spectroscopy (FTIR), Fe K-edge X-ray absorption spectroscopy (XAS), Mössbauer spectra, and X-ray photoelectron spectroscopy (XPS), were employed to explore the structural variation of Fe(II) entities in NAu-2 and the electron transfer within NAu-2 and from NAu-2 to O2. For 180 min oxidation of 1 g/L reduced NAu-2, a biphasic radOH production was observed, being quick within the initial 15 min and slow afterwards. Production of radOH correlates well with oxidation of Fe(II) in the reduced NAu-2. Within the initial 15 min, trioctahedral Fe(II)-Fe(II)-Fe(II) entities and edge Fe(II) in the reduced NAu-2 were preferentially and quickly oxidized, and electrons from the interior Fe(II)-Fe(II)-Fe(II) entities were most likely ejected from the basal siloxane plane to O2. Meanwhile, trioctahedral Fe(II)-Fe(II)-Fe(II) entities were mainly transformed to dioctahedral Fe(II)-Fe(II) entities. When the time of oxygenation was longer than 15 min

  19. Hydrogenation of organic matter as a terminal electron sink sustains high CO 2 :CH 4 production ratios during anaerobic decomposition

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Rachel M.; Tfaily, Malak M.; Rich, Virginia I.; Keller, Jason K.; Bridgham, Scott D.; Zalman, Cassandra Medvedeff; Meredith, Laura; Hanson, Paul J.; Hines, Mark; Pfeifer-Meister, Laurel; Saleska, Scott R.; Crill, Patrick; Cooper, William T.; Chanton, Jeff P.; Kostka, Joel E.

    2017-10-01

    Once inorganic electron acceptors are depleted, organic matter in anoxic environments decomposes by hydrolysis, fermentation, and methanogenesis, requiring syntrophic interactions between microorganisms to achieve energetic favorability. In this classic anaerobic food chain, methanogenesis represents the terminal electron accepting (TEA) process, ultimately producing equimolar CO2 and CH4 for each molecule of organic matter degraded. However, CO2:CH4 production in Sphagnum-derived, mineral-poor, cellulosic peat often substantially exceeds this 1:1 ratio, even in the absence of measureable inorganic TEAs. Since the oxidation state of C in both cellulose-derived organic matter and acetate is 0, and CO2 has an oxidation state of +4, if CH4 (oxidation state -4) is not produced in equal ratio, then some other compound(s) must balance CO2 production by receiving 4 electrons. Here we present evidence for ubiquitous hydrogenation of diverse unsaturated compounds that appear to serve as organic TEAs in peat, thereby providing the necessary electron balance to sustain CO2:CH4 >1. While organic electron acceptors have previously been proposed to drive microbial respiration of organic matter through the reversible reduction of quinone moieties, the hydrogenation mechanism that we propose, by contrast, reduces C-C double bonds in organic matter thereby serving as 1) a terminal electron sink, 2) a mechanism for degrading complex unsaturated organic molecules, 3) a potential mechanism to regenerate electron-accepting quinones, and, in some cases, 4) a means to alleviate the toxicity of unsaturated aromatic acids. This mechanism for CO2 generation without concomitant CH4 production has the potential to regulate the global warming potential of peatlands by elevating CO2:CH4 production ratios.

  20. A study of success and failure in product innovation with specific reference to the South African electronics industry

    OpenAIRE

    2014-01-01

    M.Com. (Business Management) The innovation and marketing of new products has become increasingly important for the profitability of companies. Developing new products is a risky endeavour. Research shows that new product development often fails. As such, it is very important that product development managers are aware of the factors that can cause product failure. This research studied the product innovation process in the South African electronics industry. The objective of the study was...

  1. Global sale of tobacco products and electronic nicotine delivery systems in community pharmacies.

    Science.gov (United States)

    Hudmon, Karen Suchanek; Elkhadragy, Nervana; Kusynová, Zuzana; Besançon, Luc; Brock, Tina Penick; Corelli, Robin L

    2017-12-01

    To estimate the proportion of countries/territories that allow sales of tobacco products and electronic nicotine delivery systems (ENDS) in community pharmacies. International Pharmaceutical Federation (FIP) member organisations were contacted by email and asked to respond to a two-item survey assessing whether their country/territory allowed sales of (a) tobacco products and (b) ENDS in community pharmacies. Of 95 countries/territories contacted, responses were received from 60 (63.2%). Seven countries (11.7%) reported that tobacco products were sold in community pharmacies, and 11 countries (18.3%) reported that ENDS were sold in community pharmacies. Among the FIP member organisations, there are few countries that allow the sale of tobacco products and ENDS in community pharmacies, with ENDS being more likely than tobacco products to be sold. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  2. The added value of Good Manufacturing Practices (GMP) in the production of radiopharmaceuticals

    NARCIS (Netherlands)

    Gerrits, Edwin; Woerdenbag, Herman; Luurtsema, Geert; de Hooge, Marjolijn; Boersma, Hendrikus

    2017-01-01

    Manufacturers of medicinal products including radiopharmaceuticals have to follow regulations from their governmental organizations as well as professional societies to ensure built-in quality combined with patient safety issues. This chapter is a concise review of Good Manufacturing Practices (GMP)

  3. Guidelines for computer security in general practice.

    Science.gov (United States)

    Schattner, Peter; Pleteshner, Catherine; Bhend, Heinz; Brouns, Johan

    2007-01-01

    As general practice becomes increasingly computerised, data security becomes increasingly important for both patient health and the efficient operation of the practice. To develop guidelines for computer security in general practice based on a literature review, an analysis of available information on current practice and a series of key stakeholder interviews. While the guideline was produced in the context of Australian general practice, we have developed a template that is also relevant for other countries. Current data on computer security measures was sought from Australian divisions of general practice. Semi-structured interviews were conducted with general practitioners (GPs), the medical software industry, senior managers within government responsible for health IT (information technology) initiatives, technical IT experts, divisions of general practice and a member of a health information consumer group. The respondents were asked to assess both the likelihood and the consequences of potential risks in computer security being breached. The study suggested that the most important computer security issues in general practice were: the need for a nominated IT security coordinator; having written IT policies, including a practice disaster recovery plan; controlling access to different levels of electronic data; doing and testing backups; protecting against viruses and other malicious codes; installing firewalls; undertaking routine maintenance of hardware and software; and securing electronic communication, for example via encryption. This information led to the production of computer security guidelines, including a one-page summary checklist, which were subsequently distributed to all GPs in Australia. This paper maps out a process for developing computer security guidelines for general practice. The specific content will vary in different countries according to their levels of adoption of IT, and cultural, technical and other health service factors. Making

  4. Perceived quality, perceived risk and customer trust affecting customer loyalty of environmentally friendly electronics products

    Directory of Open Access Journals (Sweden)

    Lalinthorn Marakanon

    2017-01-01

    Full Text Available At present, industrial business competition causes producers to be aware of quality, price, and variety in developing new products to meet the consumers' needs. This research reviewed the literature on green marketing and proposes a new conceptual framework of customer loyalty. It uses four constructs—perceived quality, perceived risk, customer trust, and customer loyalty—in the context of environmentally friendly electronics products in Thailand. This research employed an empirical study using the questionnaire survey method to verify the hypotheses. Data were obtained from 420 consumers who bought and used environmentally friendly electronic products, particularly mobile phones, computers, and laptops using a purposive sampling method. The data were analyzed using confirmatory factor analysis (CFA and structural equation modeling (SEM. The results showed that perceived risk and customer trust had a direct effect on customer loyalty while perceived quality had an indirect effect on customer loyalty via customer trust. Furthermore, perceived quality had direct effects on perceived risk and customer trust. The results from the final SEM model were used to confirm the proposed relationships among the variables.

  5. Management practices and challenges in smallholder indigenous chicken production in Western Kenya

    Directory of Open Access Journals (Sweden)

    Ochieng Justus

    2013-08-01

    Full Text Available The potential benefit of indigenous chicken (Gallus domesticus production is still under-exploited in Kenya despite the efforts by different stakeholders to mainstream this production system as a pathway to rural development. The production system is often characterized by low input-low output productivity and low commercialization of the enterprise. This study which dwells on the current management practices and challenges faced by smallholder indigenous chicken farmers was conducted to gain insights into the underlying causes of production constraints. In Western Kenya women (76% dominate the indigenous chicken production system. The flock composition consists mainly of chicks, hens and pullets (80% which reflects their retention for production purposes. Less than half of the farmers access institutional support services such as extension, training, credit and veterinary services. In addition, indigenous chicken is largely reared in a low input-low output free-range system with only few farmers (24.2% adopting management interventions as disseminated by extension service. To improve production and attain increased productivity, policy should focus on repackaging extension messages that considers farmers economic situations and strengthens collective action initiatives. Accessing joint input purchase and collective marketing of chicken products may further assist the farmers to increase profit margins.

  6. Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

    Science.gov (United States)

    Dassey, Adam J; Theegala, Chandra S

    2014-01-01

    Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

  7. New electron beam facility for R and D and production at acsion industries

    Energy Technology Data Exchange (ETDEWEB)

    Lopata, V.J.; Barnard, J.W.; Saunders, C.B.; Stepanik, T.M. E-mail: stepanik@acsion.com

    2003-08-01

    Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R and D capabilities. These modifications are described in this paper.

  8. Resource conservation approached with an appropriate collection and upgrade-remanufacturing for used electronic products.

    Science.gov (United States)

    Zlamparet, Gabriel I; Tan, Quanyin; Stevels, A B; Li, Jinhui

    2018-03-01

    This comparative research represents an example for a better conservation of resources by reducing the amount of waste (kg) and providing it more value under the umbrella of remanufacturing. The three discussed cases will expose three issues already addressed separately in the literature. The generation of waste electrical and electronic equipment (WEEE) interacts with the environmental depletion. In this article, we gave the examples of addressed issues under the concept of remanufacturing. Online collection opportunity eliminating classical collection, a business to business (B2B) implementation for remanufactured servers and medical devices. The material reuse (recycling), component sustainability, reuse (part harvesting), product reuse (after repair/remanufacturing) indicates the recovery potential using remanufacturing tool for a better conservation of resources adding more value to the products. Our findings can provide an overview of new system organization for the general collection, market potential and the technological advantages using remanufacturing instead of recycling of WEEE or used electrical and electronic equipment. Copyright © 2017. Published by Elsevier Ltd.

  9. Electronic communication and collaboration in a health care practice.

    Science.gov (United States)

    Safran, C; Jones, P C; Rind, D; Bush, B; Cytryn, K N; Patel, V L

    1998-02-01

    Using cognitive evaluation techniques, this study examines the effects of an electronic patient record and electronic mail on the interactions of health care providers. We find that the least structured communication methods are also the most heavily used: face-to-face, telephone, and electronic mail. Positive benefits of electronically-mediated interactions include improving communication, collaboration, and access to information to support decision-making. Negative factors include the potential for overloading clinicians with unwanted or unnecessary communications.

  10. Organisational determinants of production and efficiency in general practice: a population-based study

    DEFF Research Database (Denmark)

    Rose Olsen, Kim; Gyrd-Hansen, Dorte; Sørensen, Torben Højmark

    2013-01-01

    Shortage of general practitioners (GPs) and an increased political focus on primary care have enforced the interest in efficiency analysis in the Danish primary care sector. This paper assesses the association between organisational factors of general practices and production and efficiency. We a...

  11. Measurements of nuclear data and possibility to construct the nuclear data production facility based on electron linac

    Energy Technology Data Exchange (ETDEWEB)

    Namkung, Won; Ko, In Soo; Cho, Moo Hyun; Kim, Gui Nyun; Lee, Young Seok; Kang, Heung Sik [Pohang University of Science and Technology, Pohang(Korea)

    2001-04-01

    In order to construct an infrastructure to produce nuclear data, we studied three main items; (1) Study on the possibility to construct a facility for nuclear data production, (2) Production of nuclear data for nuclear power plant, and (3) Pulsed neutron source based on a 100-MeV electron linac at Pohang Accelerator Laboratory (PAL). We confirmed the possibility to build a nuclear data production facility utilizing a 100-MeV electron linac at PAL and manpower who wanted to participate the nuclear data production experiments. In order to measure the nuclear data for nuclear power plant, we used several nuclear data production facilities in abroad. We measured total cross sections and neutron caprure cross sections for {sup nat}Dy and {sup nat}Hf using the pulsed neutron facility in the Research Reactor Institute, Kyoto University (KURRI). The neutron capture cross sections for {sup 161,162,163,164}Dy were measured at KURRI in the neutron energy region between 0.001 eV and several tens keV, and at the fast neutron facility in Tokyo Institute of Technology in the neutron energy region between 10 keV and 100 keV. We also measured the neutron capture cross sections and gamma multiplicity of {sup 232}Th at the IBR30 in Dubna, Russia. We have construct a pulsed neutron source using a 100-MeV electron linac at PAL. We measured neutron time-of-flight (TOF) spectra in order to check the characteristics of the pulsed neutron source. We also measured a neutron total cross sections of W and Cu. The pulsed neutron facility can be utilized in the education facility for nuclear data production and the test facility for the R and D purpose of the nuclear data production facility. 29 refs., 57 figs., 22 tabs. (Author)

  12. Hardwiring patient blood management: harnessing information technology to optimize transfusion practice.

    Science.gov (United States)

    Dunbar, Nancy M; Szczepiorkowski, Zbigniew M

    2014-11-01

    This review will describe recent applications of computerized provider order entry (CPOE) with clinical decision support systems (CDSS) in transfusion medicine and other novel ways information technology is being applied to support patient blood management (PBM) efforts. CPOE with CDSS can be used to encourage appropriate transfusion practices as part of an institutional PBM program. The impact of CPOE with CDSS is enhanced when the laboratory information system (LIS) can be linked to the electronic medical record (EMR) to enable adaptive alerts that query transfusion orders against current laboratory and/or clinical data to ensure provider ordering practice is consistent with institutional guidelines. Additional current applications of healthcare information technology to transfusion medicine include creation of electronic reports to support order auditing, assessment of blood product utilization and compliance monitoring. Application of healthcare information technology to transfusion medicine will expand, as more institutions embrace PBM and utilize their EMR and LIS to 'hardwire' appropriate transfusion practice. The impact of implementation of CPOE with CDSS is variable and influenced by multiple factors including existing practice patterns, provider receptiveness and system configuration.

  13. A test of the IAEA code of practice for absorbed dose determination in photon and electron beams

    International Nuclear Information System (INIS)

    Leitner, A.; Tiefenboeck, W.; Witzani, J.; Strachotinsky, C.

    1990-12-01

    The IAEA Code of Practice TRS 277 gives recommendations for absorbed dose determination in high energy photon and electron beams based on the use of ionisation chambers calibrated in terms of exposure or air kerma. The scope of the present work was to test the Code for 60 Co gamma radiation and for several radiation qualities at four different types of electron accelerators and to compare the ionisation chamber dosimetry with ferrous sulphate dosimetry. The results show agreement between the two methods within about one per cent for all the investigated qualities. In addition the response of the TLD capsules of the IAEA/WHO TL dosimetry service has been determined. (Authors) 5 refs., 9 tabs., 3 figs

  14. Three common faults in current practice that influence the validity of data obtained from electronic air pollution instrumentation.

    Science.gov (United States)

    Dowd, G; Thomas, R S; Monkman, J L

    1975-01-01

    Instrumental development is now entering a more logical era, where the former artistic character of electronics is being replaced by cold technology. Because of this, one should be expect more reliability; however, there still exist many weak links in practical application. Digital readout systems and computer processing induce a false sense of security. In reality, it is the sample-measurement relationship that determines an instrument's credibility and not the number of digits on its meter. In describing three faulty practices that greatly influence an instrument's performance, it is hoped that measurement may be more closely related to the sample!

  15. Three common faults in current practice that influence the validity of data obtained from electronic air pollution instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Dowd, G; Thomas, R S; Monkman, J L

    1975-01-01

    Instrumental development is now entering a more logical era, where the former artistic character of electronics is being replaced by cold technology. Because of this, one should expect more reliability; however, there still exist many weak links in practical application. Digital readout systems and computer processing induce a false sense of security. In reality, it is the sample-measurement relationship that determines an instrument's credibility and not the number of digits on its meter. In describing three faulty practices that greatly influence an instrument's performance, it is hoped that measurement may be more closely related to the sample.

  16. A Crafts-Oriented Approach to Computing in High School: Introducing Computational Concepts, Practices, and Perspectives with Electronic Textiles

    Science.gov (United States)

    Kafai, Yasmin B.; Lee, Eunkyoung; Searle, Kristin; Fields, Deborah; Kaplan, Eliot; Lui, Debora

    2014-01-01

    In this article, we examine the use of electronic textiles (e-textiles) for introducing key computational concepts and practices while broadening perceptions about computing. The starting point of our work was the design and implementation of a curriculum module using the LilyPad Arduino in a pre-AP high school computer science class. To…

  17. Product Innovation Strategies on Emerging Markets: Bringing Theory and Practice Together

    Directory of Open Access Journals (Sweden)

    Alina Irina POPESCU

    2013-12-01

    Full Text Available Emerging economies present the largest growth in the world, and thus tremendous growth opportunities. Developing products for emerging markets proves to be a difficult task requiring a fundamental shift in thinking, and the present paper aims at investigating the product innovation strategies available on emerging markets, theoretically and practically through examples and a case-study of the Romanian tablet market. At the beginning, the theoretical framework is described through the most relevant contributions to the field of product innovation. Some conceptual clarifications are provided, in the context of a widespread usage of terms in various fields of science. The second part of the paper attempts to define the ‘emerging markets’ and to find distinctive their characteristics, attempt hampered by their great diversity and complexity. The third part provides empirical support for the product innovation strategies used by local tablet producers in Romania. Findings show local tablet producers used the frugal innovation strategy in the first years of operations. Afterwards, the increasingly competitive market and the gradual sophistication of consumers made a shift in strategy, to new product development and innovation strategy, in the context of keeping the low-cost positioning of the locally produced tablets.

  18. Inclusive prompt photon production in electron-nucleus scattering at small x

    Science.gov (United States)

    Roy, Kaushik; Venugopalan, Raju

    2018-05-01

    We compute the differential cross-section for inclusive prompt photon production in deeply inelastic scattering (DIS) of electrons on nuclei at small x in the framework of the Color Glass Condensate (CGC) effective theory. The leading order (LO) computation in this framework resums leading logarithms in x as well as power corrections to all orders in Q s, A 2 / Q 2, where Q s, A ( x) is the nuclear saturation scale. This LO result is proportional to universal dipole and quadrupole Wilson line correlators in the nucleus. In the soft photon limit, the Low-Burnett-Kroll theorem allows us to recover existing results on inclusive DIS dijet production. The k ⊥ and collinearly factorized expressions for prompt photon production in DIS are also recovered in a leading twist approximation to our result. In the latter case, our result corresponds to the dominant next-to-leading order (NLO) perturbative QCD contribution at small x. We next discuss the computation of the NLO corrections to inclusive prompt photon production in the CGC framework. In particular, we emphasize the advantages for higher order computations in inclusive photon production, and for fully inclusive DIS, arising from the simple momentum space structure of the dressed quark and gluon "shock wave" propagators in the "wrong" light cone gauge A - = 0 for a nucleus moving with P N + → ∞.

  19. Introduction to Electronics course

    CERN Multimedia

    CERN. Geneva HR-RFA

    2006-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  20. An empirical determination of the production efficiency for auroral 6300 AA emmission by energetic electrons

    International Nuclear Information System (INIS)

    Winningham, J.D.; Bunn, F.E.; Thirkettle, F.W.; Shepherd, G.G.

    1979-06-01

    Auroral data from the Soft Particle Spectrometer and the Red Line Photometer on the ISIS-2 spacecraft have been selected to form an electron energy flux and optical auroral emission data base. The energy fluxes are stored as integrated fluxes over four energy bands, and the corresponding stored optical emission rates are corrected for airglow and for albedo. Because of the variety of electron energy spectra represented in the data base it was possible to perform a regression analysis that yielded the production efficiency for the production of emission for each of the four bands. While the results of this analysis are interesting to compare with theoretical predictions of 6300 AA excitation processes, these statistical results are not as precise as the comparisons of individual experiments where all parameters, such as the atmospheric composition and temperature profiles are measured. The significance of this approach is that it permits a multiparameter description of an electron energy spectrum, and its relationship to a specific optical emission, by purely empirical means. This is particularly useful in the interpretation of ISIS-2 data from the instruments which provided the results, but should find further application in optical-particle auroral studies. (author)

  1. Electronic medical records for otolaryngology office-based practice.

    Science.gov (United States)

    Chernobilsky, Boris; Boruk, Marina

    2008-02-01

    Pressure is mounting on physicians to adopt electronic medical records. The field of health information technology is evolving rapidly with innovations and policies often outpacing science. We sought to review research and discussions about electronic medical records from the past year to keep abreast of these changes. Original scientific research, especially from otolaryngologists, is lacking in this field. Adoption rates are slowly increasing, but more of the burden is shouldered by physicians despite policy efforts and the clear benefits to third-party payers. Scientific research from the past year suggests lack of improvements and even decreasing quality of healthcare with electronic medical record adoption in the ambulatory care setting. The increasing prevalence and standardization of electronic medical record systems results in a new set of problems including rising costs, audits, difficulties in transition and public concerns about security of information. As major players in healthcare continue to push for adoption, increased effort must be made to demonstrate actual improvements in patient care in the ambulatory care setting. More scientific studies are needed to demonstrate what features of electronic medical records actually improve patient care. Otolaryngologists should help each other by disseminating research about improvement in patient outcomes with their systems since current adoption and outcomes policies do not apply to specialists.

  2. Electron beam processing in wire and cables and heat shrinkable products

    International Nuclear Information System (INIS)

    Tikku, V.K.

    2001-01-01

    In this paper in a general manner the commercially successful E-beam crosslinking in wire and cable and heat shrinkable products being manufactured first time in India are illustrated. We at NICCO in India have established first industrial electron accelerator of 150 kW power with 3 MeV beam energy and 50 mA beam current, near Calcutta; the facility is likely to be commissioned by January, 2002. This facility was conceived and the developmental work was carried out with the active support of our R and D partners at Rubber Technology Centre, IIT, Kharagpur and Bhabha Atomic Research Centre, Mumbai. The polymeric compound developments, its extrusion on to the cable samples and radiation crosslinking were successfully achieved in this joint R and D efforts. We have already executed the developmental order with the know-how developed indigenously with our research partners and using the 2 MeV electron accelerator facility at Bhabha Atomic Research Centre, Mumbai. (author)

  3. Electron-positron annihilation physics

    International Nuclear Information System (INIS)

    Foster, B.

    1990-01-01

    Electron-Positron Annihilation Physics is a detailed introduction to the main topics in e + e - annihilation, with particular emphasis on experimental work. Four main areas are covered, each in great detail, beginning with the Standard Model and its application to the production of lepton, quark and boson pairs. Secondly, the general features of fragmentation and different fragmentation models are explained. Chapter 3 is devoted to heavy quark and lepton physics, to which e + e - experiments have made an immense contribution. The final chapter, 'Where do we go from here?', looks for new phenomena beyond the Standard Model. Predictions of theory are compared with experimental results, highlighting shortcomings of some current theories. Details of instrumentation are included whenever possible. This ensures that the book is of maximum practical use to research workers. A comprehensive introduction to the major topics in the field, Electron-Positron Annihilation Physics is aimed at both graduate students studying high-energy physics and mature research workers. (author)

  4. Production of excited nitrogen atoms and ions by electron impact on nitrogen molecules

    International Nuclear Information System (INIS)

    Rall, D.L.A.; Anderson, L.W.; Lin, C.C.; Sharpton, F.A.

    1984-01-01

    Emission lines of the N atoms and N ions are produced by electron-beam dissociative excitation of N 2 molecules. The ns→3 /sub p/ (n=5 to 9), np→3s (n=3 to 7), nd→3 /sub p/ (n=4 to 8), nf→3d (n=4,5) transitions of N and the 3 /sub p/ →3s, 3d→3p, 4s→3p, 4p→3d, 4f→3d transitions of N + have been observed and optical emission cross sections at various incident electron energies have been measured. The energy dependence of the cross sections of the N emission lines is similar to that of the N + lines at high incident electron energies, but the low-energy behaviors are quite different. These features are explained by the mechanisms involved in the production of the excited N atoms and N + ions. Absolute optical emission cross sections for the N and N + lines are presented

  5. Comparison of National and International Standards of Good Egg Production Practices

    Directory of Open Access Journals (Sweden)

    GP Sousa

    Full Text Available ABSTRACT Egg production is an important economic activity in Brazil, with about 697 million eggs produced annually. The conventional cage system is commonly used for egg production. However, there has been a growing concern for the welfare of laying hens around the world. In this context, many countries have issued laws, protocols, and other normative technical specifications to ensure the welfare of layers. This study aims at identifying similarities and differences between international standards and Brazilian protocols using the Comparative Law perspective. This article reports an analytical study of selected protocols, performing three analyses using the Comparative Law method. The research concludes that some items of the Brazilian protocols of good egg production practices, such as farm inspection, treatment of diseases, temperature, ventilation, beak trimming, feed and water supply, correspond to international specifications, whereas others, such as housing, freedom movement, use of equipment, and transport, are less strict.

  6. Good manufacturing practices production of a purification-free oral cholera vaccine expressed in transgenic rice plants.

    Science.gov (United States)

    Kashima, Koji; Yuki, Yoshikazu; Mejima, Mio; Kurokawa, Shiho; Suzuki, Yuji; Minakawa, Satomi; Takeyama, Natsumi; Fukuyama, Yoshiko; Azegami, Tatsuhiko; Tanimoto, Takeshi; Kuroda, Masaharu; Tamura, Minoru; Gomi, Yasuyuki; Kiyono, Hiroshi

    2016-03-01

    The first Good Manufacturing Practices production of a purification-free rice-based oral cholera vaccine (MucoRice-CTB) from transgenic plants in a closed cultivation system yielded a product meeting regulatory requirements. Despite our knowledge of their advantages, plant-based vaccines remain unavailable for human use in both developing and industrialized countries. A leading, practical obstacle to their widespread use is producing plant-based vaccines that meet governmental regulatory requirements. Here, we report the first production according to current Good Manufacturing Practices of a rice-based vaccine, the cholera vaccine MucoRice-CTB, at an academic institution. To this end, we established specifications and methods for the master seed bank (MSB) of MucoRice-CTB, which was previously generated as a selection-marker-free line, evaluated its propagation, and given that the stored seeds must be renewed periodically. The production of MucoRice-CTB incorporated a closed hydroponic system for cultivating the transgenic plants, to minimize variations in expression and quality during vaccine manufacture. This type of molecular farming factory can be operated year-round, generating three harvests annually, and is cost- and production-effective. Rice was polished to a ratio of 95 % and then powdered to produce the MucoRice-CTB drug substance, and the identity, potency, and safety of the MucoRice-CTB product met pre-established release requirements. The formulation of MucoRice-CTB made by fine-powdering of drug substance and packaged in an aluminum pouch is being evaluated in a physician-initiated phase I study.

  7. Proposal for evaluation of the level of implementation of typical practices of lean production in company a sector of the metal-mechanic

    Directory of Open Access Journals (Sweden)

    Maria da Graça Saraiva Nogueira

    2008-07-01

    Full Text Available Aiming at the advantages obtained when performing lean production, different sectors of the production of goods and services have adopted its principles and practices. Due to its degree of abstraction, it is difficult to establish a level of incorporation of such concepts. On the other hand, because of the operational features of its practices, such assessment becomes possible through the quantification of the elements involved (time, cost, raw material. The use of lean production practices does not guarantee its implementation and sustainability. However, the assessment of such practices might, in an indirect way, provide hints on how widespread its principles are and to what extent they are being adopted. The present assessment took place at an metal-mechanic company which has been implementing lean production as a philosophy of production at corporate levels since 2002. The operational manager and managers responsible for quality, production, sales, purchase, maintenance, and PCP also took part in this research. Each manager answered to an interview and filled a checklist and a ranking in order to evaluate performance and importance, respectively. Just-in-time, leveling production (heijunka, and integration practices with the supply chain yielded the most unfavorable results, whereas group technology, continuous improvement, and visual management yielded the best results. With regard to the importance criterion, the practices of standardized operations, just-in-time, and quick changeover were considered the most important, whereas workforce flexibility, group technology, and development of lean product were the least important. Key-words: Lean Production; Measurement of Performance and Importance, Sector of the metal-mechanic

  8. Manganese catalyzed cis-dihydroxylation of electron deficient alkenes with H(2)O(2).

    Science.gov (United States)

    Saisaha, Pattama; Pijper, Dirk; van Summeren, Ruben P; Hoen, Rob; Smit, Christian; de Boer, Johannes W; Hage, Ronald; Alsters, Paul L; Feringa, Ben L; Browne, Wesley R

    2010-10-07

    A practical method for the multigram scale selective cis-dihydroxylation of electron deficient alkenes such as diethyl fumarate and N-alkyl and N-aryl-maleimides using H(2)O(2) is described. High turnovers (>1000) can be achieved with this efficient manganese based catalyst system, prepared in situ from a manganese salt, pyridine-2-carboxylic acid, a ketone and a base, under ambient conditions. Under optimized conditions, for diethyl fumarate at least 1000 turnovers could be achieved with only 1.5 equiv. of H(2)O(2) with d/l-diethyl tartrate (cis-diol product) as the sole product. For electron rich alkenes, such as cis-cyclooctene, this catalyst provides for efficient epoxidation.

  9. Coupled channel calculations for electron-positron pair production in collisions of heavy ions

    CERN Document Server

    Gail, M; Scheid, W

    2003-01-01

    Coupled channel calculations are performed for electron-positron pair production in relativistic collisions of heavy ions. For this purpose the wavefunction is expanded into different types of basis sets consisting of atomic wavefunctions centred around the projectile ion only and around both of the colliding nuclei. The results are compared with experimental data from Belkacem et al (1997 Phys. Rev. A 56 2807).

  10. Effect of the food production chain from farm practices to vegetable processing on outbreak incidence.

    Science.gov (United States)

    Jung, Yangjin; Jang, Hyein; Matthews, Karl R

    2014-11-01

    The popularity in the consumption of fresh and fresh-cut vegetables continues to increase globally. Fresh vegetables are an integral part of a healthy diet, providing vitamins, minerals, antioxidants and other health-promoting compounds. The diversity of fresh vegetables and packaging formats (spring mix in clamshell container, bagged heads of lettuce) support increased consumption. Unfortunately, vegetable production and processing practices are not sufficient to ensure complete microbial safety. This review highlights a few specific areas that require greater attention and research. Selected outbreaks are presented to emphasize the need for science-based 'best practices'. Laboratory and field studies have focused on inactivation of pathogens associated with manure in liquid, slurry or solid forms. As production practices change, other forms and types of soil amendments are being used more prevalently. Information regarding the microbial safety of fish emulsion and pellet form of manure is limited. The topic of global climate change is controversial, but the potential effect on agriculture cannot be ignored. Changes in temperature, precipitation, humidity and wind can impact crops and the microorganisms that are associated with production environments. Climate change could potentially enhance the ability of pathogens to survive and persist in soil, water and crops, increasing human health risks. Limited research has focused on the prevalence and behaviour of viruses in pre and post-harvest environments and on vegetable commodities. Globally, viruses are a major cause of foodborne illnesses, but are seldom tested for in soil, soil amendments, manure and crops. Greater attention must also be given to the improvement in the microbial quality of seeds used in sprout production. Human pathogens associated with seeds can result in contamination of sprouts intended for human consumption, even when all appropriate 'best practices' are used by sprout growers. © 2014 The

  11. Weight watching and the effect of landscape on honeybee colony productivity

    DEFF Research Database (Denmark)

    Lecocq, Antoine; Kryger, Per; Vejsnæs, Flemming

    2015-01-01

    sites can give valuable insight on the influence of landscape on their productivity and might point towards future directions for modernized beekeeping practices. Using data on honeybee colony weights provided by electronic scales spread across Denmark, we investigated the effect of the immediate...

  12. A practical approach to temperature effects in dissociative electron attachment cross sections using local complex potential theory

    International Nuclear Information System (INIS)

    Sugioka, Yuji; Takayanagi, Toshiyuki

    2012-01-01

    Highlights: ► Dissociative electron attachment cross sections for polyatomic molecules are calculated by a simple theoretical approach. ► Temperature effects can be reasonably reproduced with the present model. ► All the degrees-of-freedom are taken into account in the present dynamics approach. -- Abstract: We propose a practical computational scheme to obtain temperature dependence of dissociative electron attachment cross sections to polyatomic molecules within a local complex potential theory formalism. First we perform quantum path-integral molecular dynamics simulations on the potential energy surface for the neutral molecule in order to sample initial nuclear configurations as well as momenta. Classical trajectories are subsequently integrated on the potential energy surface for the anionic state and survival probabilities are simultaneously calculated along the obtained trajectories. We have applied this simple scheme to dissociative electron attachment processes to H 2 O and CF 3 Cl, for which several previous studies are available from both the experimental and theoretical sides.

  13. A practical approach to temperature effects in dissociative electron attachment cross sections using local complex potential theory

    Energy Technology Data Exchange (ETDEWEB)

    Sugioka, Yuji [Department of Chemistry, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama City, Saitama 338-8570 (Japan); Takayanagi, Toshiyuki, E-mail: tako@mail.saitama-u.ac.jp [Department of Chemistry, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama City, Saitama 338-8570 (Japan)

    2012-09-11

    Highlights: Black-Right-Pointing-Pointer Dissociative electron attachment cross sections for polyatomic molecules are calculated by a simple theoretical approach. Black-Right-Pointing-Pointer Temperature effects can be reasonably reproduced with the present model. Black-Right-Pointing-Pointer All the degrees-of-freedom are taken into account in the present dynamics approach. -- Abstract: We propose a practical computational scheme to obtain temperature dependence of dissociative electron attachment cross sections to polyatomic molecules within a local complex potential theory formalism. First we perform quantum path-integral molecular dynamics simulations on the potential energy surface for the neutral molecule in order to sample initial nuclear configurations as well as momenta. Classical trajectories are subsequently integrated on the potential energy surface for the anionic state and survival probabilities are simultaneously calculated along the obtained trajectories. We have applied this simple scheme to dissociative electron attachment processes to H{sub 2}O and CF{sub 3}Cl, for which several previous studies are available from both the experimental and theoretical sides.

  14. Fiber-based wearable electronics: a review of materials, fabrication, devices, and applications.

    Science.gov (United States)

    Zeng, Wei; Shu, Lin; Li, Qiao; Chen, Song; Wang, Fei; Tao, Xiao-Ming

    2014-08-20

    Fiber-based structures are highly desirable for wearable electronics that are expected to be light-weight, long-lasting, flexible, and conformable. Many fibrous structures have been manufactured by well-established lost-effective textile processing technologies, normally at ambient conditions. The advancement of nanotechnology has made it feasible to build electronic devices directly on the surface or inside of single fibers, which have typical thickness of several to tens microns. However, imparting electronic functions to porous, highly deformable and three-dimensional fiber assemblies and maintaining them during wear represent great challenges from both views of fundamental understanding and practical implementation. This article attempts to critically review the current state-of-arts with respect to materials, fabrication techniques, and structural design of devices as well as applications of the fiber-based wearable electronic products. In addition, this review elaborates the performance requirements of the fiber-based wearable electronic products, especially regarding the correlation among materials, fiber/textile structures and electronic as well as mechanical functionalities of fiber-based electronic devices. Finally, discussions will be presented regarding to limitations of current materials, fabrication techniques, devices concerning manufacturability and performance as well as scientific understanding that must be improved prior to their wide adoption. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Accumulative charge separation for solar fuels production: coupling light-induced single electron transfer to multielectron catalysis.

    Science.gov (United States)

    Hammarström, Leif

    2015-03-17

    The conversion and storage of solar energy into a fuel holds promise to provide a significant part of the future renewable energy demand of our societies. Solar energy technologies today generate heat or electricity, while the large majority of our energy is used in the form of fuels. Direct conversion of solar energy to a fuel would satisfy our needs for storable energy on a large scale. Solar fuels can be generated by absorbing light and converting its energy to chemical energy by electron transfer leading to separation of electrons and holes. The electrons are used in the catalytic reduction of a cheap substrate with low energy content into a high-energy fuel. The holes are filled by oxidation of water, which is the only electron source available for large scale solar fuel production. Absorption of a single photon typically leads to separation of a single electron-hole pair. In contrast, fuel production and water oxidation are multielectron, multiproton reactions. Therefore, a system for direct solar fuel production must be able to accumulate the electrons and holes provided by the sequential absorption of several photons in order to complete the catalytic reactions. In this Account, the process is termed accumulative charge separation. This is considerably more complicated than charge separation on a single electron level and needs particular attention. Semiconductor materials and molecular dyes have for a long time been optimized for use in photovoltaic devices. Efforts are made to develop new systems for light harvesting and charge separation that are better optimized for solar fuel production than those used in the early devices presented so far. Significant progress has recently been made in the discovery and design of better homogeneous and heterogeneous catalysts for solar fuels and water oxidation. While the heterogeneous ones perform better today, molecular catalysts based on transition metal complexes offer much greater tunability of electronic and

  16. Charmed and strange baryon production in 29-GeV electron positron collisions

    International Nuclear Information System (INIS)

    Klein, S.R.

    1988-01-01

    Baryon production is one of the least understood areas of hadron production in electron positron collisions. Early models of hadronization predicted that very few baryons should be produced. However, experiments have shown a very substantial rate of baryon production, and many different models have been proposed to explain this. One way to test these models, and to further probe the hadronization process is to measure the production rates of different types of baryons. This dissertation presents measurements of the production rates of baryons with different strangeness and spin. The analyses presented here use data taken with the Mark II detector at the PEP storage ring, operating at a center of mass energy of 29 GeV. The Ξ - production rate is measured to be 0.017 ± 0.004 ± 0.004 per hadronic event, Ω - production is measured to be 0.014 ± 0.006 ± 0.004 per hadronic event, and Ξ *0 production is less than 0.006 per hadronic event at a 90% confidence level. These measurements place strong constraints on models of baryon production. In particular, the unexpectedly high rate of Ω - production is difficult to explain in any disquark based model. Semileptonic Λ c + decays have also been observed, with σ(e + e - → Λ c X) * Br(Λ c → eΛX) = 0.0031 ± 0.0012 ± 0.0010 per hadronic event, and σ(e + e - → Λ c X) * Br(Λ c → μΛX) = 0.0024 ± 0.0024 ± 0.0007 per hadronic event. Because neither the branching ratios nor the production rate are well known, it is difficult to interpret these results

  17. Experimental studies on the production and suppression mechanism of the hot electrons produced by short wavelength laser

    International Nuclear Information System (INIS)

    Qi Lanying; Jiang Xiaohua; Zhao Xuewei; Li Sanwei; Zhang Wenhai; Li Chaoguang; Zheng Zhijian; Ding Yongkun

    1999-12-01

    The experiments on gold-disk and hohlraum and plastic hydrocarbon (CH) film targets irradiated by laser beams with wavelength 0.35 μm (Xingguang-II) and 0.53 μm (Shenguang-I) are performed. The characteristics of hot electrons are commonly deduced from spectrum of hard X-ray. Associated with the measurement of backward SRS and 3/2ω 0 , the production mechanism of hot electrons for different target type is analyzed in laser plasma with shorter wavelength. A effective way to suppress hot electrons has been found

  18. Impact-parameter dependence of the total probability for electromagnetic electron-positron pair production in relativistic heavy-ion collisions

    International Nuclear Information System (INIS)

    Hencken, K.; Trautmann, D.; Baur, G.

    1995-01-01

    We calculate the impact-parameter-dependent total probability P total (b) for the electromagnetic production of electron-positron pairs in relativistic heavy-ion collisions in lowest order. We study expecially impact parameters smaller than the Compton wavelength of the electron, where the equivalent-photon approximation cannot be used. Calculations with and without a form factor for the heavy ions are done; the influence is found to be small. The lowest-order results are found to violate unitarity and are used for the calculation of multiple-pair production probabilities with the help of the approximate Poisson distribution already found in earlier publications

  19. Electronic medical records and efficiency and productivity during office visits.

    Science.gov (United States)

    Furukawa, Michael F

    2011-04-01

    To estimate the relationship between electronic medical record (EMR) use and efficiency of utilization and provider productivity during visits to US office-based physicians. Cross-sectional analysis of the 2006-2007 National Ambulatory Medical Care Survey. The sample included 62,710 patient visits to 2625 physicians. EMR systems included demographics, clinical notes, prescription orders, and laboratory and imaging results. Efficiency was measured as utilization of examinations, laboratory tests, radiology procedures, health education, nonmedication treatments, and medications. Productivity was measured as total services provided per 20-minute period. Survey-weighted regressions estimated association of EMR use with services provided, visit intensity/duration, and productivity. Marginal effects were estimated by averaging across all visits and by major reason for visit. EMR use was associated with higher probability of any examination (7.7%, 95% confidence interval [CI] = 2.4%, 13.1%); any laboratory test (5.7%, 95% CI = 2.6%, 8.8%); any health education (4.9%, 95% CI = 0.2%, 9.6%); and fewer laboratory tests (-7.1%, 95% CI = -14.2%, -0.1%). During pre/post surgery visits, EMR use was associated with 7.3% (95% CI= -12.9%, -1.8%) fewer radiology procedures. EMR use was not associated with utilization of nonmedication treatments and medications, or visit duration. During routine visits for a chronic problem, EMR use was associated with 11.2% (95% CI = 5.7%, 16.8%) more diagnostic/screening services provided per 20-minute period. EMR use had a mixed association with efficiency and productivity during office visits. EMRs may improve provider productivity, especially during visits for a new problem and routine chronic care.

  20. Convoy electron production by heavy ions in solids

    International Nuclear Information System (INIS)

    Sellin, I.A.

    1984-01-01

    The term convoy electron refers to those electrons ejected in fast ion-atom and ion-solid collisions closely matched in vector velocity to that of the incident heavy particles responsible for their ejection. Similarities and differences among electrons ejected into such states through binary electron capture to continuum and electron loss to continuum processes in single ion-atom encounters are compared and contrasted to more complex ejection processes occurring in solid targets. Puzzles posed by the apparent strong projectile Z dependence but weak emergent ion charge dependence of the yield in the case of solid targets are reviewed. Very recent progress in resolving these puzzles has been made by recent observations that the apparent mean free path for electron scattering out of the forward direction within the target is observed to be an order of magnitude greater than that for free electrons of equal velocity provided the projectile charge is high. 13 references, 2 figures, 1 table

  1. Modelling Conditions and Health Care Processes in Electronic Health Records: An Application to Severe Mental Illness with the Clinical Practice Research Datalink.

    Science.gov (United States)

    Olier, Ivan; Springate, David A; Ashcroft, Darren M; Doran, Tim; Reeves, David; Planner, Claire; Reilly, Siobhan; Kontopantelis, Evangelos

    2016-01-01

    The use of Electronic Health Records databases for medical research has become mainstream. In the UK, increasing use of Primary Care Databases is largely driven by almost complete computerisation and uniform standards within the National Health Service. Electronic Health Records research often begins with the development of a list of clinical codes with which to identify cases with a specific condition. We present a methodology and accompanying Stata and R commands (pcdsearch/Rpcdsearch) to help researchers in this task. We present severe mental illness as an example. We used the Clinical Practice Research Datalink, a UK Primary Care Database in which clinical information is largely organised using Read codes, a hierarchical clinical coding system. Pcdsearch is used to identify potentially relevant clinical codes and/or product codes from word-stubs and code-stubs suggested by clinicians. The returned code-lists are reviewed and codes relevant to the condition of interest are selected. The final code-list is then used to identify patients. We identified 270 Read codes linked to SMI and used them to identify cases in the database. We observed that our approach identified cases that would have been missed with a simpler approach using SMI registers defined within the UK Quality and Outcomes Framework. We described a framework for researchers of Electronic Health Records databases, for identifying patients with a particular condition or matching certain clinical criteria. The method is invariant to coding system or database and can be used with SNOMED CT, ICD or other medical classification code-lists.

  2. Electron Production and Collective Field Generation in Intense Particle Beams

    International Nuclear Information System (INIS)

    Molvik, A W; Vay, J; Cohen, R; Friedman, A; Lee, E; Verboncoeur, J; Covo, M K

    2006-01-01

    Electron cloud effects (ECEs) are increasingly recognized as important, but incompletely understood, dynamical phenomena, which can severely limit the performance of present electron colliders, the next generation of high-intensity rings, such as PEP-II upgrade, LHC, and the SNS, the SIS 100/200, or future high-intensity heavy ion accelerators such as envisioned in Heavy Ion Inertial Fusion (HIF). Deleterious effects include ion-electron instabilities, emittance growth, particle loss, increase in vacuum pressure, added heat load at the vacuum chamber walls, and interference with certain beam diagnostics. Extrapolation of present experience to significantly higher beam intensities is uncertain given the present level of understanding. With coordinated LDRD projects at LLNL and LBNL, we undertook a comprehensive R and D program including experiments, theory and simulations to better understand the phenomena, establish the essential parameters, and develop mitigating mechanisms. This LDRD project laid the essential groundwork for such a program. We developed insights into the essential processes, modeled the relevant physics, and implemented these models in computational production tools that can be used for self-consistent study of the effect on ion beams. We validated the models and tools through comparison with experimental data, including data from new diagnostics that we developed as part of this work and validated on the High-Current Experiment (HCX) at LBNL. We applied these models to High-Energy Physics (HEP) and other advanced accelerators. This project was highly successful, as evidenced by the two paragraphs above, and six paragraphs following that are taken from our 2003 proposal with minor editing that mostly consisted of changing the tense. Further benchmarks of outstanding performance are: we had 13 publications with 8 of them in refereed journals, our work was recognized by the accelerator and plasma physics communities by 8 invited papers and we have

  3. Electronic Nose for Microbiological Quality Control of Food Products

    Directory of Open Access Journals (Sweden)

    M. Falasconi

    2012-01-01

    Full Text Available Electronic noses (ENs have recently emerged as valuable candidates in various areas of food quality control and traceability, including microbial contamination diagnosis. In this paper, the EN technology for microbiological screening of food products is reviewed. Four paradigmatic and diverse case studies are presented: (a Alicyclobacillus spp. spoilage of fruit juices, (b early detection of microbial contamination in processed tomatoes, (c screening of fungal and fumonisin contamination of maize grains, and (d fungal contamination on green coffee beans. Despite many successful results, the high intrinsic variability of food samples together with persisting limits of the sensor technology still impairs ENs trustful applications at the industrial scale. Both advantages and drawbacks of sensor technology in food quality control are discussed. Finally, recent trends and future directions are illustrated.

  4. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  5. Gamma and electron radiation effects on agricultural by-products with high fibre content

    International Nuclear Information System (INIS)

    Leonhardt, J.W.; Baer, M.; Nehring, K.

    1983-01-01

    Gamma and electron radiation effects on wheat straw, oat straw, barley straw, rye straw and dried green fodder are reported. In vitro and in vivo studies show that the digestibility of these agricultural by-products with high fibre content can be increased up to 80% and more at high doses. The increase of the digestibility is connected with a depolymerization of the cellulose and hemicellulose. (author)

  6. Highly efficient electron gun with a single-atom electron source

    International Nuclear Information System (INIS)

    Ishikawa, Tsuyoshi; Urata, Tomohiro; Cho, Boklae; Rokuta, Eiji; Oshima, Chuhei; Terui, Yoshinori; Saito, Hidekazu; Yonezawa, Akira; Tsong, Tien T.

    2007-01-01

    The authors have demonstrated highly collimated electron-beam emission from a practical electron gun with a single-atom electron source; ∼80% of the total emission current entered the electron optics. This ratio was two or three orders of magnitude higher than those of the conventional electron sources such as a cold field emission gun and a Zr/O/W Schottky gun. At the pressure of less than 1x10 -9 Pa, the authors observed stable emission of 20 nA, which generates the specimen current of 5 pA required for scanning electron microscopes

  7. Ethical, moral and social dimensions in farm production practices: a segmentation study to assess Irish consumers’ perceptions of meat quality

    OpenAIRE

    Regan Á.; Henchion M; McIntyre B

    2018-01-01

    Growing consumer concerns with modern farming and food production systems indicate a significant market opportunity for meat production practices that consider ethical, moral and social value traits. In the current study, we aimed to identify and characterise distinct segments of Irish consumers based on their perceptions of the quality of meat from different farm-level production practices (organic farming, high animal welfare standards, free range farming, and “natural”, treatment-free feed...

  8. Characterization of the animal by-product meal industry in Costa Rica: Manufacturing practices through the production chain and food safety.

    Science.gov (United States)

    Leiva, A; Granados-Chinchilla, F; Redondo-Solano, M; Arrieta-González, M; Pineda-Salazar, E; Molina, A

    2018-06-01

    Animal by-product rendering establishments are still relevant industries worldwide. Animal by-product meal safety is paramount to protect feed, animals, and the rest of the food chain from unwanted contamination. As microbiological contamination may arise from inadequate processing of slaughterhouse waste and deficiencies in good manufacturing practices within the rendering facilities, we conducted an overall establishment's inspection, including the product in several parts of the process.An evaluation of the Good Manufacturing Practices (GMP) was carried out, which included the location and access (i.e., admission) to the facilities, integrated pest management programs, physical condition of the facilities (e.g., infrastructure), equipments, vehicles and transportation, as well as critical control points (i.e., particle size and temperature set at 50 mm, 133°C at atmospheric pressure for 20 min, respectively) recommended by the OIE and the European Commission. The most sensitive points according to the evaluation are physical structure of the facilities (avg 42.2%), access to the facilities (avg 48.6%), and cleaning procedures (avg 51.4%).Also, indicator microorganisms (Salmonella spp., Clostridium spp., total coliforms, E. coli, E. coli O157:H7) were used to evaluate the safety in different parts of the animal meal production process. There was a prevalence of Salmonella spp. of 12.9, 14.3, and 33.3% in Meat and Bone Meal (MBM), poultry by-products, and fish meal, respectively. However, there were no significant differences (P = 0.73) in the prevalence between the different animal meals, according to the data collected.It was also observed that renderings associated with the poultry industry (i.e., 92.0%) obtained the best ratings overall, which reflects a satisfactory development of this sector and the integration of its production system as a whole.

  9. Electron beam production by a plasma focus

    International Nuclear Information System (INIS)

    Smith, J.R.; Luo, C.M.; Schneider, R.F.; Rhee, M.J.

    1984-01-01

    Operation of a plasma focus as a Compact Pulsed Accelerator (CPA) for ions has been previously reported. The CPA consists of: (1) a 15 μF, 3 kJ capacitor, (2) a triggered spark gap, (3) a coaxial transmission line, and (4) a Mather geometry plasma gun. Recently the authors have investigated application of the CPA as an accelerator for electrons. In the previously reported work using the standard Mather plasma gun geometry, ions were accelerated away from the plasma gun and were therefore conveniently extracted for analysis, but electrons were directed into the hollow anode where extraction is blocked by the coaxial transmission line. For investigation of accelerated electrons a new plasma gun design which allows extraction of electrons has been developed. Details of the new plasma gun design and further results of beam diagnostics are discussed

  10. Knowledge, Attitudes, and Practice of Electronic Cigarette Use Among Pregnant Women.

    Science.gov (United States)

    Mark, Katrina S; Farquhar, Brooke; Chisolm, Margaret S; Coleman-Cowger, Victoria H; Terplan, Mishka

    2015-01-01

    Electronic cigarettes (e-cigarettes) are a relatively recent phenomenon, serving dual roles as an alternative vehicle for nicotine delivery and a smoking-cessation tool. The purpose of this study was to determine pregnant women's knowledge, attitudes, and practice regarding electronic cigarettes. A voluntary, anonymous survey was distributed to a convenience sample of pregnant women presenting to a university-based outpatient clinic. After survey completion, participants received information about smoking cessation and e-cigarettes. Data were examined using χ² and Fisher exact tests and analysis of variance. Stata was used for the analysis. Of the 326 surveys distributed, 316 were completed (97%). Of the 316 participants, 42 (13%) reported having ever used e-cigarettes. Only 2 (0.6%) reported current daily use. Ever users were slightly older (27.3 years vs 25.4 years; P = 0.007) and more likely to be current smokers (43% vs. 14%; P e-cigarettes contain nicotine, 61% that e-cigarettes can be addictive, and 43% that e-cigarettes are less harmful to a fetus than traditional cigarettes. Among ever users, the most common reasons given for the use of e-cigarettes were the perception of less harm than traditional cigarettes (74%) and help with smoking cessation (72%). Misconceptions about e-cigarettes are common among pregnant women, potentially motivating use that may pose risks to both maternal and child health. Screening and education regarding e-cigarettes should be included in prenatal care. Future research in this area is necessary, including research examining pregnancy outcomes among women who use e-cigarettes.

  11. Using the electronic health record to build a culture of practice safety: evaluating the implementation of trigger tools in one general practice.

    Science.gov (United States)

    Margham, Tom; Symes, Natalie; Hull, Sally A

    2018-04-01

    Identifying patients at risk of harm in general practice is challenging for busy clinicians. In UK primary care, trigger tools and case note reviews are mainly used to identify rates of harm in sample populations. This study explores how adaptions to existing trigger tool methodology can identify patient safety events and engage clinicians in ongoing reflective work around safety. Mixed-method quantitative and narrative evaluation using thematic analysis in a single East London training practice. The project team developed and tested five trigger searches, supported by Excel worksheets to guide the case review process. Project evaluation included summary statistics of completed worksheets and a qualitative review focused on ease of use, barriers to implementation, and perception of value to clinicians. Trigger searches identified 204 patients for GP review. Overall, 117 (57%) of cases were reviewed and 62 (53%) of these cases had patient safety events identified. These were usually incidents of omission, including failure to monitor or review. Key themes from interviews with practice members included the fact that GPs' work is generally reactive and GPs welcomed an approach that identified patients who were 'under the radar' of safety. All GPs expressed concern that the tool might identify too many patients at risk of harm, placing further demands on their time. Electronic trigger tools can identify patients for review in domains of clinical risk for primary care. The high yield of safety events engaged clinicians and provided validation of the need for routine safety checks. © British Journal of General Practice 2018.

  12. Effect of Work-Life Balance Practices on Firm Productivity: Evidence from Japanese firm-level panel data

    OpenAIRE

    YAMAMOTO Isamu; MATSUURA Toshiyuki

    2012-01-01

    This paper examines how firm practices that could contribute to worker attainment of work-life balance (WLB) affect the total factor productivity (TFP) of a firm, by using panel data of Japanese firms from the 1990s. We observed a positive correlation between the WLB practices and TFP among sampled firms. However, that correlation vanished when we controlled for unobserved firm heterogeneity, and we found no general causal relationship in which WLB practices increase firm TFP in the medium or...

  13. Interventions to increase the use of electronic health information by healthcare practitioners to improve clinical practice and patient outcomes.

    Science.gov (United States)

    Fiander, Michelle; McGowan, Jessie; Grad, Roland; Pluye, Pierre; Hannes, Karin; Labrecque, Michel; Roberts, Nia W; Salzwedel, Douglas M; Welch, Vivian; Tugwell, Peter

    2015-03-14

    There is a large volume of health information available, and, if applied in clinical practice, may contribute to effective patient care. Despite an abundance of information, sub-optimal care is common. Many factors influence practitioners' use of health information, and format (electronic or other) may be one such factor. To assess the effects of interventions aimed at improving or increasing healthcare practitioners' use of electronic health information (EHI) on professional practice and patient outcomes. We searched The Cochrane Library (Wiley), MEDLINE (Ovid), EMBASE (Ovid), CINAHL (EBSCO), and LISA (EBSCO) up to November 2013. We contacted researchers in the field and scanned reference lists of relevant articles. We included studies that evaluated the effects of interventions to improve or increase the use of EHI by healthcare practitioners on professional practice and patient outcomes. We defined EHI as information accessed on a computer. We defined 'use' as logging into EHI. We considered any healthcare practitioner involved in patient care. We included randomized, non-randomized, and cluster randomized controlled trials (RCTs, NRCTs, CRCTs), controlled clinical trials (CCTs), interrupted time series (ITS), and controlled before-and-after studies (CBAs).The comparisons were: electronic versus printed health information; EHI on different electronic devices (e.g. desktop, laptop or tablet computers, etc.; cell / mobile phones); EHI via different user interfaces; EHI provided with or without an educational or training component; and EHI compared to no other type or source of information. Two review authors independently extracted data and assessed the risk of bias for each study. We used GRADE to assess the quality of the included studies. We reassessed previously excluded studies following our decision to define logins to EHI as a measure of professional behavior. We reported results in natural units. When possible, we calculated and reported median effect size

  14. Children's Language Production: How Cognitive Neuroscience and Industrial Engineering Can Inform Public Education Policy and Practice

    Science.gov (United States)

    Leisman, Gerry

    2012-01-01

    Little of 150 years of research in Cognitive Neurosciences, Human Factors, and the mathematics of Production Management have found their way into educational policy and certainly not into the classroom or in the production of educational materials in any meaningful or practical fashion. Whilst more mundane concepts of timing, sequencing, spatial…

  15. Relational coordination is associated with productivity in general practice: a survey and register based study

    DEFF Research Database (Denmark)

    Lundstrøm, Sanne Lykke; Edwards, Kasper; Reventlow, Susanne

    2014-01-01

    In this paper we investigate the association between relational coordination among the practice team in general practice and number of consultations performed in a general practice per staff, i.e. a proxy of productivity. We measured relational coordination using the Relational Coordination Survey...... and combined the results with register data. We found that relational coordination was statistically significant associated with number of consultation per staff per year. We later divided consultations in to three types: Face-to-face, Email and phone consultations. We found a statistically significant...... associating between relational coordination and with number of face-to-face consultation per staff per year....

  16. Electron beam technology for production of preparations of immobilized enzymes

    International Nuclear Information System (INIS)

    Gonchar, A.M.; Auslender, V.L.; Polyakov, V.A.

    1995-01-01

    Possibility of electron beam usage for proteases immobilization on 1,4-polyalkylene oxide (1,4-PAO) was studied to obtain biologically active complex for multi-purpose usage. It is shown that immobilization of Bacillus Subtilis protease is done due to free-radical linking of enzyme and carrier with formation of mycelium-like structures. Immobilization improves heat resistance of enzyme up to 60 centigrade without substrate and up to 80 centigrade in presence of substrate, widens range pH activity in comparison with non-immobilized forms. Immobilized proteases does not contain peroxides and long-live radicals. Our results permitted to create technologies for production of medical and veterinary preparations, active components for wool washing agents and leather fabrication technology

  17. Observation of exclusive electron-positron production in hadron-hadron collisions.

    Science.gov (United States)

    Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Ambrose, D; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arguin, J-F; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Bedeschi, F; Behari, S; Belforte, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Budroni, S; Burkett, K; Busetto, G; Bussey, P; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carillo, S; Carlsmith, D; Caron, B; Carosi, R; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciljak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Almenar, C Cuenca; Cuevas, J; Culbertson, R; Cully, J C; Cyr, D; Daronco, S; D'Auria, S; Davies, T; D'Onofrio, M; Dagenhart, D; de Barbaro, P; Cecco, S De; Deisher, A; Lentdecker, G De; Dell'orso, M; Paoli, F Delli; Demortier, L; Deng, J; Deninno, M; Pedis, D De; Derwent, P F; Giovanni, G P Di; Dionisi, C; Ruzza, B Di; Dittmann, J R; Dituro, P; Dörr, C; Donati, S; Donega, M; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Foland, A; Forrester, S; Foster, G W; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garberson, F; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, A; Gibson, K; Gimmell, J L; Ginsburg, C; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Griffiths, M; Grinstein, S; Grosso-Pilcher, C; Grundler, U; da Costa, J Guimaraes; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ishizawa, Y; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jensen, H; Jeon, E J; Jindariani, S; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kovalev, A; Kraan, A C; Kraus, J; Kravchenko, I; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; Lecompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Loverre, P; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; Macqueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Manca, G; Margaroli, F; Marginean, R; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Maruyama, T; Mastrandrea, P; Masubuchi, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyamoto, A; Moed, S; Moggi, N; Mohr, B; Moore, R; Morello, M; Fernandez, P Movilla; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Nachtman, J; Nagano, A; Naganoma, J; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nigmanov, T; Nodulman, L; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Papadimitriou, V; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pinfold, J; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ranjan, N; Rappoccio, S; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Sabik, S; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Saltzberg, D; Sánchez, C; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Sjolin, J; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; Denis, R St; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Takikawa, K; Tanaka, M; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuchiya, R; Tsuno, S; Turini, N; Ukegawa, F; Unverhau, T; Uozumi, S; Usynin, D; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vázquez, F; Velev, G; Veramendi, G; Veszpremi, V; Vidal, R; Vila, I; Vilar, R; Vine, T; Vollrath, I; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, J; Wagner, W; Wallny, R; Wang, S M; Warburton, A; Waschke, S; Waters, D; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zhou, J; Zucchelli, S

    2007-03-16

    We present the first observation of exclusive e(+)e(-) production in hadron-hadron collisions, using pp[over] collision data at (square root) s = 1.96 TeV taken by the run II Collider Detector at Fermilab, and corresponding to an integrated luminosity of 532 pb(-1). We require the absence of any particle signatures in the detector except for an electron and a positron candidate, each with transverse energy E(T) > 5 GeV and pseudorapidity |eta| p + e(+)e(-) + p[over] through two-photon exchange. The measured cross section is 1.6(-0.3)(+0.5)(stat) +/- 0.3(syst) pb. This agrees with the theoretical prediction of 1.71+/-0.01 pb.

  18. Proceedings of the workshop on photocathodes for polarized electron sources for accelerators

    International Nuclear Information System (INIS)

    Chatwell, M.; Clendenin, J.; Maruyama, T.; Schultz, D.

    1994-04-01

    Application of the GaAs polarized electron source to studies of surface magnetism; thermal stability of Cs on NES III-V-Photocathodes and its effect on quantum efficiency; AFEL accelerator; production and detection of SPIN polarized electrons; emittance measurements on a 100-keV beam from a GaAs photocathode electron gun; modern theory of photoemission and its applications to practical photocathodes; experimental studies of the charge limit phenomenon in GaAs photocathodes; new material for photoemission electron source; semiconductor alloy InGaAsP grown on GaAs substrate; NEA photocathode surface preparation; technology and physics; metalorganic chemical vapor deposition of GaAs-GaAsP spin-polarized photocathodes; development of photocathodes injectors for JLC-ATF; effect of radiation trapping on polarization of photoelectrons from semiconductors; and energy analysis of electrons emitted by a semiconductor photocathode

  19. 78 FR 18234 - Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United...

    Science.gov (United States)

    2013-03-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1005 [Docket No. FDA-2007-N-0091; (formerly 2007N-0104)] Service of Process on Manufacturers; Manufacturers Importing Electronic Products Into the United States; Agent Designation; Change of Address AGENCY: Food and Drug...

  20. 77 FR 20416 - Used Electronic Products: An Examination of U.S. Exports; Proposed Information Collection...

    Science.gov (United States)

    2012-04-04

    ...: Direct all written comments to Laura Bloodgood, Project Leader, U.S. International Trade Commission, 500... leader Laura Bloodgood ( [email protected] or 202-708-4726) or deputy project leader Andrea Boron..., volume, and value of, and foreign markets of significance for, exports of used electronic products from...

  1. Matrix-product-state method with local basis optimization for nonequilibrium electron-phonon systems

    Science.gov (United States)

    Heidrich-Meisner, Fabian; Brockt, Christoph; Dorfner, Florian; Vidmar, Lev; Jeckelmann, Eric

    We present a method for simulating the time evolution of quasi-one-dimensional correlated systems with strongly fluctuating bosonic degrees of freedom (e.g., phonons) using matrix product states. For this purpose we combine the time-evolving block decimation (TEBD) algorithm with a local basis optimization (LBO) approach. We discuss the performance of our approach in comparison to TEBD with a bare boson basis, exact diagonalization, and diagonalization in a limited functional space. TEBD with LBO can reduce the computational cost by orders of magnitude when boson fluctuations are large and thus it allows one to investigate problems that are out of reach of other approaches. First, we test our method on the non-equilibrium dynamics of a Holstein polaron and show that it allows us to study the regime of strong electron-phonon coupling. Second, the method is applied to the scattering of an electronic wave packet off a region with electron-phonon coupling. Our study reveals a rich physics including transient self-trapping and dissipation. Supported by Deutsche Forschungsgemeinschaft (DFG) via FOR 1807.

  2. Simultaneous production of spin-polarized ions/electrons based on two-photon ionization of laser-ablated metallic atoms

    International Nuclear Information System (INIS)

    Nakajima, Takashi; Yonekura, Nobuaki; Matsuo, Yukari; Kobayashi, Tohru; Fukuyama, Yoshimitsu

    2003-01-01

    We demonstrate the simultaneous production of spin-polarized ions/electrons using two-color, two-photon ionization of laser-ablated metallic atoms. Specifically, we have applied the developed technique to laser-ablated Sr atoms, and found that the electron-spin polarization of Sr + ions, and accordingly, the spin polarization of photoelectrons is 64%±9%, which is in good agreement with the theoretical prediction we have recently reported [T. Nakajima and N. Yonekura, J. Chem. Phys. 117, 2112 (2002)]. Our experimental results open up a simple way toward the construction of a spin-polarized dual ion/electron source

  3. Projectile-charge-state dependence of 0 degree binary-encounter electron production in 30-MeV Oq++O2 collisions

    International Nuclear Information System (INIS)

    Zouros, T.J.M.; Richard, P.; Wong, K.L.; Hidmi, H.I.; Sanders, J.M.; Liao, C.; Grabbe, S.; Bhalla, C.P.

    1994-01-01

    Double-differential cross sections (DDCS's) for the production of binary-encounter electrons (BEE's) are reported for 30-MeV O q+ +O 2 collisions. The BEE DDCS's were measured at θ=0 degree with respect to the beam direction for projectile charge states q=4--8. The measured BEE DDCS's were found to increase with decreasing charge state in agreement with other recent BEE results employing simpler H 2 and He targets. Impulse-approximation calculations of BEE production for θ=0 degree--45 degree are also presented, in which it is assumed that target electrons undergo elastic scattering in the screened Coulomb field of the projectile ion. These calculations are shown to be in agreement with our data at θ=0 degree where only 2s and 2p target electrons are considered

  4. Application of electron accelerator worldwide

    International Nuclear Information System (INIS)

    Machi, Sueo

    2003-01-01

    Electron accelerator is an important radiation source for radiation technology, which covers broad fields such as industry, health care, food and environmental protection. There are about 1,000 electron accelerators for radiation processing worldwide. Electron accelerator has advantage over Co-60 irradiator in term of high dose rate and power, assurance of safety, and higher economic performance at larger volume of irradiation. Accelerator generating higher energy in the range of 10 MeV and high power electron beam is now commercially available. There is a trend to use high-energy electron accelerator replacing Co-60 in case of large through-put of medical products. Irradiated foods, in particular species, are on the commercial market in 35 countries. Electron accelerator is used efficiently and economically for production of new or modified polymeric materials through radiation-induced cross-linking, grafting and polymerization reaction. Another important application of electron beam is the curing of surface coatings in the manufacture of products. Electron accelerators of large capacity are used for cleaning exhaust gases in industrial scale. Economic feasibility studies of this electron beam process have shown that this technology is more cost effective than the conventional process. It should be noted that the conventional limestone process produce gypsum as a by-product, which cannot be used in some countries. By contrast, the by-product of the electron beam process is a valuable fertilizer. (Y. Tanaka)

  5. Application of electron accelerator worldwide

    Energy Technology Data Exchange (ETDEWEB)

    Machi, Sueo [Japan Atomic Industrial Forum, Inc., Tokyo (Japan)

    2003-02-01

    Electron accelerator is an important radiation source for radiation technology, which covers broad fields such as industry, health care, food and environmental protection. There are about 1,000 electron accelerators for radiation processing worldwide. Electron accelerator has advantage over Co-60 irradiator in term of high dose rate and power, assurance of safety, and higher economic performance at larger volume of irradiation. Accelerator generating higher energy in the range of 10 MeV and high power electron beam is now commercially available. There is a trend to use high-energy electron accelerator replacing Co-60 in case of large through-put of medical products. Irradiated foods, in particular species, are on the commercial market in 35 countries. Electron accelerator is used efficiently and economically for production of new or modified polymeric materials through radiation-induced cross-linking, grafting and polymerization reaction. Another important application of electron beam is the curing of surface coatings in the manufacture of products. Electron accelerators of large capacity are used for cleaning exhaust gases in industrial scale. Economic feasibility studies of this electron beam process have shown that this technology is more cost effective than the conventional process. It should be noted that the conventional limestone process produce gypsum as a by-product, which cannot be used in some countries. By contrast, the by-product of the electron beam process is a valuable fertilizer. (Y. Tanaka)

  6. Sustainable packaging design for consumer electronics products: Balancing marketing, logistics and environmental requirements

    OpenAIRE

    Wever, R.; Boks, C.B.; Pratama, I.; Stevels, A.L.N.

    2007-01-01

    Packaging design for consumer electronic products is a challenge because contradictory demands from a distribution perspective and a marketing perspective have to be balanced. With several company departments involved and powerful external stakeholders this is a complicated matter. As the level of sophistication of data concerning a packagings marketing performance is limited, decisions are often strongly based on beliefs. This is reflected in inconsistencies in packaging that is currently in...

  7. The Maplin electronic circuits handbook

    CERN Document Server

    Tooley, Michael

    1990-01-01

    The Maplin Electronic Circuits Handbook provides pertinent data, formula, explanation, practical guidance, theory and practical guidance in the design, testing, and construction of electronic circuits. This book discusses the developments in electronics technology techniques.Organized into 11 chapters, this book begins with an overview of the common types of passive component. This text then provides the reader with sufficient information to make a correct selection of passive components for use in the circuits. Other chapters consider the various types of the most commonly used semiconductor

  8. Secondary-electron-production cross sections for electron-impact ionization of helium

    International Nuclear Information System (INIS)

    Goruganthu, R.R.; Bonham, R.A.

    1986-01-01

    Measurements of the double-differential cross sections (DDCS) as a function of the ejected energy, angle, and primary energy for electron-impact ionization of helium are reported at incident energies of 200, 500, 1000, and 2000 eV. The ejection angle is varied from 30 0 to 150 0 in steps of 15 0 . The cross sections were obtained by use of a crossed-beam apparatus with an effusive gas source and a pulsed electron beam. Scattered and ejected electrons were energy analyzed by time-of-flight analysis from 2 eV to the primary energy as a function of the ejection angle. The relative measurements were normalized by matching the experimental elastic differential cross sections to absolute measurements at selected angles. Comparisons of the DDCS with available literature values revealed significant differences. At 2000 eV impact energy, first-Born-approximation calculations of the DDCS were found to be in agreement with the present data for ejected energies between 2 and 40 eV. At large angles and lower incident energies the Born calculation results are lower than the present DDCS. The DDCS were fitted with a Legendre-polynomial expansion as a function of ejection angle for fixed ejected and primary energies. The energy distributions of ejected electrons derived from these fits are presented and used to calculate the total ionization cross section

  9. The usage of electron beam to produce radio isotopes through the uranium fission by γ-rays and neutrons

    International Nuclear Information System (INIS)

    Bunatyan, G.G.; Nikolenko, V.G.; Popov, A.V.

    2010-01-01

    We treat the production of desirable radio isotopes due to the 238 U photo-fission by the bremsstrahlung induced in converter by an initial electron beam provided by a linear electron accelerator. We consider as well the radio isotope production through the 238 U fission by the neutrons that stem in the 238 U sample irradiated by that bremsstrahlung. The yield of the most applicable radio isotope 99 Mo is calculated. We correlate the findings acquired in the work presented with those obtained by treating the nuclear photo-neutron reaction. Menace of the plutonium contamination of an irradiated uranium sample because of the neutron capture by 238 U is considered. As we get convinced, the photo-neutron production of radio isotopes proves to be more practicable than the production by the uranium photo- and neutron-fission. Both methods are certain to be brought into action due to usage of the electron beam provided by modern linear accelerators

  10. Crossdressing to Backbeats: The Status of the Electroclash Producer and the Politics of Electronic Music

    Directory of Open Access Journals (Sweden)

    David Madden

    2012-11-01

    Full Text Available Addressing the international emergence of electroclash at the turn of the millenium, this article investigates the distinct character of the genre and its related production practices, both in and out of the studio. Electroclash combines the extended pulsing sections of techno, house and other dance musics with the trashier energy of rock and new wave. The genre signals an attempt to reinvigorate dance music with a sense of sexuality, personality and irony. Electroclash also emphasizes, rather than hides, the European, trashy elements of electronic dance music. The coming together of rock and electro is examined vis-à-vis the ongoing changing sociality of music production/distribution and the changing role of the producer. Numerous women, whether as solo producers, or in the context of collaborative groups, significantly contributed to shaping the aesthetics and production practices of electroclash, an anomaly in the history of popular music and electronic music, where the role of the producer has typically been associated with men. These changes are discussed in relation to the way electroclash producers Peaches, Le Tigre, Chicks on Speed, and Miss Kittin and the Hacker often used a hybrid approach to production that involves the integration of new(er technologies, such as laptops containing various audio production softwares with older, inexpensive keyboards, microphones, samplers and drum machines to achieve the ironic backbeat laden hybrid electro-rock sound.   

  11. Practical Aspects of CALS in Design and Manufacturing of Sheet Metal Products

    DEFF Research Database (Denmark)

    Shpitalni, Moshe; Alting, Leo; Bilberg, Arne

    1998-01-01

    The transition from design to process planning and to the various stages of manufacturing is traditionally sequential. In many cases, practical problems associated with manufacturing cannot be resolved if only individual processes are examined. These problems can be overcome, however, by adopting...... with the design and manufacture of sheet metal parts. It is demonstrated that through implementation of the CALS approach, the overall process can be optimised and products can be manufactured significantly more accurately, faster and less expensively.......The transition from design to process planning and to the various stages of manufacturing is traditionally sequential. In many cases, practical problems associated with manufacturing cannot be resolved if only individual processes are examined. These problems can be overcome, however, by adopting...

  12. Nuclear Electronics. Proceedings of a Conference on Nuclear Electronics

    International Nuclear Information System (INIS)

    1966-01-01

    The science of electronics, which is playing a decisive role in the modern world, is particularly important in the development of the nuclear sciences, both in fundamental research on the structure of matter and in the production of power from fission. It is impractical, however, to deal with this vast and varied subject at one time. The Agency's first conference on the subject, at Belgrade in May 1961, was restricted to just a few aspects of nuclear electronics. The second conference, organized by the Agency in co-operation with the Indian Atomic Energy Commission and held at Bombay from 22 to 26 November 1965, was limited, for all practical purposes, to the use of nuclear electronics in reactor control and safety. The importance of this subject is self-evident, for the number of power reactors throughout the world is increasing every year and the economics of their operation depends just as much on optimum functioning as on improved safety. The Bombay conference, at which 48 papers were presented, was attended by a large number of participants, representing 12 countries and two international organizations. The main topics were power and neutron-flux measurements, reactor control, safety devices, and data processing to ensure optimum operation. The Proceedings, which contain both the texts and discussions of the papers presented, are of immediate interest to specialists in these fields and should form a valuable source of information

  13. Production of runaway electrons by negative streamer discharges

    DEFF Research Database (Denmark)

    Chanrion, Olivier Arnaud; Neubert, Torsten

    2010-01-01

    thunderstorms, the so-called Terrestrial Gamma-Ray Flashes. The radiation is thought to be bremsstrahlung from energetic (MeV) electrons accelerated in a thunderstorm discharge. The observation goes against conventional wisdom that discharges in air are carried by electrons with energies below a few tens of e...... and the conditions on the electric field for the acceleration of electrons into the runaway regime. We use particle codes to describe the process of stochastic acceleration and introduce a novel technique that improves the statistics of the relatively few electrons that reach high energies. The calculation...

  14. Impact of electronic medical record on physician practice in office settings: a systematic review

    Directory of Open Access Journals (Sweden)

    Lau Francis

    2012-02-01

    Full Text Available Abstract Background Increased investments are being made for electronic medical records (EMRs in Canada. There is a need to learn from earlier EMR studies on their impact on physician practice in office settings. To address this need, we conducted a systematic review to examine the impact of EMRs in the physician office, factors that influenced their success, and the lessons learned. Results For this review we included publications cited in Medline and CINAHL between 2000 and 2009 on physician office EMRs. Studies were included if they evaluated the impact of EMR on physician practice in office settings. The Clinical Adoption Framework provided a conceptual scheme to make sense of the findings and allow for future comparison/alignment to other Canadian eHealth initiatives. In the final selection, we included 27 controlled and 16 descriptive studies. We examined six areas: prescribing support, disease management, clinical documentation, work practice, preventive care, and patient-physician interaction. Overall, 22/43 studies (51.2% and 50/109 individual measures (45.9% showed positive impacts, 18.6% studies and 18.3% measures had negative impacts, while the remaining had no effect. Forty-eight distinct factors were identified that influenced EMR success. Several lessons learned were repeated across studies: (a having robust EMR features that support clinical use; (b redesigning EMR-supported work practices for optimal fit; (c demonstrating value for money; (d having realistic expectations on implementation; and (e engaging patients in the process. Conclusions Currently there is limited positive EMR impact in the physician office. To improve EMR success one needs to draw on the lessons from previous studies such as those in this review.

  15. Limits on the production of large transverse momentum direct photons deduced from the measurement of low-mass electron pairs

    International Nuclear Information System (INIS)

    Cobb, J.H.; Iwata, S.; Palmer, R.B.; Rahm, D.C.; Rehak, P.; Stumer, I.; Fabjan, C.W.; Fowler, E.; Mannelli, I.; Mouzourakis, P.; Nakamura, K.; Nappi, A.; Willis, W.J.; Goldberg, M.; Horwitz, N.; Moneti, G.C.; Lankford, A.J.; Kourkoumelis, C.

    1978-01-01

    The hadronic production of electron pairs with masses between 200 and 500 MeV and large transverse momentum has been measured at the CERN Intersecting Storage Rings (ISR). The expected relation between low-mass electron pairs and real photons is used to determine the direct hadronic production of photons. Contrary to indications from some previous experiments, the observed spectrum is consistent with expectations from the decay of known mesons, and leads to a value for the ratio of direct photons to π 0 of γ/π 0 =(0.55+-0.92)% for 2 = 55 GeV. (Auth.)

  16. Electronics manufacturing and assembly in Japan

    Science.gov (United States)

    Kukowski, John A.; Boulton, William R.

    1995-02-01

    In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

  17. Managing soil microbial communities in grain production systems through cropping practices

    Science.gov (United States)

    Gupta, Vadakattu

    2013-04-01

    Cropping practices can significantly influence the composition and activity of soil microbial communities with consequences to plant growth and production. Plant type can affect functional capacity of different groups of biota in the soil surrounding their roots, rhizosphere, influencing plant nutrition, beneficial symbioses, pests and diseases and overall plant health and crop production. The interaction between different players in the rhizosphere is due to the plethora of carbon and nutritional compounds, root-specific chemical signals and growth regulators that originate from the plant and are modulated by the physico-chemical properties of soils. A number of plant and environmental factors and management practices can influence the quantity and quality of rhizodeposition and in turn affect the composition of rhizosphere biota communities, microbe-fauna interactions and biological processes. Some of the examples of rhizosphere interactions that are currently considered important are: proliferation of plant and variety specific genera or groups of microbiota, induction of genes involved in symbiosis and virulence, promoter activity in biocontrol agents and genes correlated with root adhesion and border cell quality and quantity. The observation of variety-based differences in rhizodeposition and associated changes in rhizosphere microbial diversity and function suggests the possibility for the development of varieties with specific root-microbe interactions targeted for soil type and environment i.e. designer rhizospheres. Spatial location of microorganisms in the heterogeneous field soil matrix can have significant impacts on biological processes. Therefore, for rhizosphere research to be effective in variable seasonal climate and soil conditions, it must be evaluated in the field and within a farming systems context. With the current focus on security of food to feed the growing global populations through sustainable agricultural production systems there is a

  18. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  19. Electronic Cigarette Marketing Online: a Multi-Site, Multi-Product Comparison.

    Science.gov (United States)

    Chu, Kar-Hai; Sidhu, Anupreet K; Valente, Thomas W

    2015-01-01

    Electronic cigarette awareness and use has been increasing rapidly. E-cigarette brands have utilized social networking sites to promote their products, as the growth of the e-cigarette industry has paralleled that of Web 2.0. These online platforms are cost-effective and have unique technological features and user demographics that can be attractive for selective marketing. The popularity of multiple sites also poses a risk of exposure to social networks where e-cigarette brands might not have a presence. To examine the marketing strategies of leading e-cigarette brands on multiple social networking sites, and to identify how affordances of the digital media are used to their advantage. Secondary analyses include determining if any brands are benefitting from site demographics, and exploring cross-site diffusion of marketing content through multi-site users. We collected data from two e-cigarette brands from four social networking sites over approximately 2.5 years. Content analysis is used to search for themes, population targeting, marketing strategies, and cross-site spread of messages. Twitter appeared to be the most frequently used social networking site for interacting directly with product users. Facebook supported informational broadcasts, such as announcements regarding political legislation. E-cigarette brands also differed in their approaches to their users, from informal conversations to direct product marketing. E-cigarette makers use different strategies to market their product and engage their users. There was no evidence of direct targeting of vulnerable populations, but the affordances of the different sites are exploited to best broadcast context-specific messages. We developed a viable method to study cross-site diffusion, although additional refinement is needed to account for how different types of digital media are used.

  20. Exclusive ρ0 production in deep inelastic electron-proton scattering at HERA

    International Nuclear Information System (INIS)

    Derrick, M.; Krakauer, D.; Magill, S.

    1995-07-01

    The exclusive production of ρ 0 mesons in deep inelastic electron-proton scattering has been studied using the ZEUS detector. Cross sections have been measured in the range 7 2 2 for γ*p centre of mass (c.m.) energies from 40 to 130 GeV. The γ*p→ρ 0 p cross section exhibits a Q -(4.2±0.8 -0.5 +1.4 ) dependence and both longitudinally and transversely polarised ρ 0 's are observed. The γ*p→ρ 0 p0 cross section rises strongly with increasing c.m. energy, when compared with NMC data at lower energy, which cannot be explained by production through soft pomeron exchange. The data are compared with perturbative QCD calculations where the rise in the cross section reflects the increase in the gluon density at low x. (orig.)