Software Support for Optimizing Layout Solution in Lean Production

Directory of Open Access Journals (Sweden)

Naqib Daneshjo

2018-02-01

Full Text Available As progressive managerial styles, the techniques based on "lean thinking" are being increasingly promoted. They are focused on applying lean production concepts to all phases of product lifecycle and also to business environment. This innovative approach strives to eliminate any wasting of resources and shortens the time to respond to customer requirements, including redesigning the structure of the organization’ supply chain. A lean organization is created mainly by employees, their creative potential, knowledge, self-realization and motivation for continuous improvement of the processes and the production systems. A set of tools, techniques and methods of lean production is basically always very similar. Only a form of their presentation or classification into individual phases of the product lifecycle may differ. The authors present the results of their research from the designing phases of production systems to optimize their dispositional solution with software support and 3D simulation and visualization. Modelling is based on use of Tecnomatix's and Photomodeler's progressive software tools and a dynamic model for capacitive dimensioning of more intelligent production system

Automation and decision support in interactive consumer products.

OpenAIRE

Sauer, J.; Rüttinger, B.

2007-01-01

This article presents two empirical studies (n=30, n=48) that are concerned with different forms of automation in interactive consumer products. The goal of the studies was to evaluate the effectiveness of two types of automation: perceptual augmentation (i.e. supporting users' action selection and implementation). Furthermore, the effectiveness of non-product information (i.e. labels attached to product) in supporting automation design was evaluated. The findings suggested greater benefits f...

Information support of decision-making in the early stages of new product development when approaching marketing management

Directory of Open Access Journals (Sweden)

A. A. Tishhenko

2017-01-01

Full Text Available Goal. To create theoretical and practical approaches to information support of the decision making procedure at the initial stages of developing a new product with a marketing management approach that allows to improve the quality of management decisions on the product. Material and methods. The projected software package on the basis of expert assessments and fuzzy sets, allows to automate the decision to implement innovation at an early stage. The work used such scientific methods as generalization of scientific literature in the field of shaping and taking into account the features of innovation, Solutions in the initial stages of development, methods of expert evaluation and elements of fuzzy sets. Results and its discussion. The article presents the rationale and possibilities for informational support of the decision-making procedure for innovative products. The authors also proposed a methodology for making a decision when developing a new product based on expert and predictive assessments of innovation at the initial stages of its creation. A software package has been developed that automates the decision to manufacture a new product at the initial stages of production. Conclusion. Despite a large number of theoretical developments in innovative management, the risk associated with the release of new products remains quite high. The developed methodology of information support for decision-making at the initial stages of the development of a new product will reduce the risk of the lack of demand for innovation.

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Review of nonchemical methods for controlling stored products pests

International Nuclear Information System (INIS)

Ignatowicz, S.

1996-01-01

Fumigation of stored products with methyl bromide has been an important means of limiting the loss of quality and quantity of these commodities that are subject to attack by cosmopolitan stored product pests. Methyl bromide was identified as a substance depleting ozone, and is expected to be withdrawn from production, importation, and use in Poland and other countries soon after 2000. Based on the current knowledge, most of alternatives to methyl bromide (controlled atmospheres, heat, cold, irradiation, biotechnical methods, inert dusts, biological methods, sanitation) have researchable gaps or other constraints. None of these alternatives used alone will replace methyl bromide. Successful pest control in the absence of methyl bromide will require the development of sophisticated pest monitoring and decision support systems to enable the use of integrated pest management strategies. (author)

IT support of energy-sensitive product development. Energy-efficient product and process innovations in production engineering. Virtual product development for energy-efficient products and processes; IT-Unterstuetzung zur energiesensitiven Produktentwicklung. Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik. Handlungsfeld virtuelle Produktentwicklung fuer energieeffiziente Produkte und Prozesse (PE)

Energy Technology Data Exchange (ETDEWEB)

Reichel, Thomas; Ruenger, Gudula; Steger, Daniel; Xu, Haibin

2010-07-07

The development of low-cost, energy-saving and resources-saving products is increasingly important. Thecalculation of the life cycle cost is an important basis for this. For this, it is necessary to extract empirical, decision-relevant data from IT systems of product development (e.g. product data management systems) and operation (e.g. enterprise resource planning systems), and to give the planner appropriate methods for data aggregation. Life cycle data are particularly important for optimising energy efficiency, which may be achieved either by enhanced productivity at constant energy consumption or by reduced energy consumption at constant productivity. The report presents an IT view of the product development process. First, modern methods of product development are analysed including IT support and IT systems. Requirements on IT systems are formulated which enable energy efficiency assessment and optimisation in all phases of product development on the basis of the IT systems used. IT systems for energy-sensitive product development will support the construction engineer in the development of energy-efficient products. For this, the functionalities of existing PDM systems must be enhanced by methods of analysis, synthesis and energy efficiency assessment. Finally, it is shown how the methods for analyzing energy-relevant data can be integrated in the work flow.

Annunciation - building product team capabilities to support utility operational improvement

International Nuclear Information System (INIS)

Doucet, R.; Brown, R.; Trask, D.; Leger, R.; Mitchel, G.; Judd, R.; Davey, E.

2003-01-01

The purpose of this paper is to describe an AECL initiative to enhance the capabilities to assist utilities with undertaking annunciation improvement. This initiative was undertaken to complement a recent annunciation product upgrade, and in anticipation of developing commercial opportunities to assist Canadian and foreign utilities with control room annunciation improvement. Utilities are relying more and more on external engineering product and service providers to meet their plant support needs as they reduce in-house staffing to lower ongoing support costs. This evolving commercial environment places new demands on product and service providers, and provides new opportunities for increasing the proportion of product and service provider participation in plant improvement projects. This paper outlines recent AECL experience in the annunciation product area. The paper discusses the rationale for product support capability improvement, discusses the approaches undertaken, describes lessons learned, and outlines a proposed utility support model for assisting with future annunciation improvements. (author)

Cost-Effective Method for Producing Self Supported Palladium Alloy Membranes for Use in Efficient Production of Coal Derived Hydrogen

Energy Technology Data Exchange (ETDEWEB)

K. Coulter

2008-03-31

Southwest Research Institute{reg_sign} (SwRI{reg_sign}) has utilized its expertise in large-area vacuum deposition methods to conduct research into the fabrication of dense, freestanding Pd-alloy membranes that are 3-5 microns thick and over 100 in{sup 2} in area. The membranes were deposited onto flexible and rigid supports that were subsequently removed and separated using novel techniques developed over the course of the project. Using these methods, the production of novel alloy compositions centered around the Pd-Cu system were developed with the objective of producing a thermally stable, nano-crystalline grain structure with the highest flux recorded as 242 SCFH/ft{sup 2} for a 2 {micro}m thick Pd{sub 53}Cu{sub 47} at 400 C and 20 psig feed pressure which when extrapolated is over twice the 2010 Department of Energy pure H{sub 2} flux target. Several membranes were made with the same permeability, but with different thicknesses and these membranes were highly selective. Researchers at the Colorado School of Mines supported the effort with extensive testing of experimental membranes as well as design and modeling of novel alloy composite structures. IdaTech provided commercial bench testing and analysis of SwRI-manufactured membranes. The completed deliverables for the project include test data on the performance of experimental membranes fabricated by vacuum deposition and several Pd-alloy membranes that were supplied to IdaTech for testing.

Agent Technology in Agile Multiparallel Manufacturing and Product Support

NARCIS (Netherlands)

van Moergestel, L.J.M.

2014-01-01

The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

Collaborative Development Planning Model of Supporting Product in Platform Innovation Ecosystem

Directory of Open Access Journals (Sweden)

Wei Zhang

2014-01-01

Full Text Available In order to improve the market value of the product, the platform enterprise often participates in the development process of supporting product of emerging industry’s platform innovation ecosystem. This paper puts forward a revenue sharing contract between the platform company and the supporting company by creating a collaborative development model of the supporting product in the ecosystem, and this paper studies the platform enterprise investment resource property's (complementary or substitution impact on the supporting enterprise R&D efforts and the revenue sharing factor and analyzes collaborative development mechanism of supporting product of emerging industry platform innovation ecosystem. The research indicates that when platform enterprise and supporting enterprise's resources are complementary, the supporting enterprise R&D effort level and revenue sharing coefficient increase as the platform company’s investment increases. When platform enterprise and supporting enterprise's resources are substitutive, the supporting enterprise’s R&D effort level and revenue sharing coefficient decrease as the platform company’s investment increases.

Preparing the Production of a New Product in Small and Medium-Sized Enterprises by Using the Method of Projects Management

Science.gov (United States)

Bijańska, Jolanta; Wodarski, Krzysztof; Wójcik, Janusz

2016-06-01

Efficient and effective preparation the production of new products is important requirement for a functioning and development of small and medium-sized enterprises. One of the methods, which support the fulfilment of this condition is project management. This publication presents the results of considerations, which are aimed at developing a project management model of preparation the production of a new product, adopted to specificity of small and medium-sized enterprises.

Maintenance Approaches for Different Production Methods

Directory of Open Access Journals (Sweden)

Mungani, Dzivhuluwani Simon

2013-11-01

Full Text Available Various production methods are used in industry to manufacture or produce a variety of products needed by industry and consumers. The nature of a product determines which production method is most suitable or cost-effective. A continuous process is typically used to produce large volumes of liquids or gases. Batch processing is often used for small volumes, such as pharmaceutical products. This paper discusses a research project to determine the relationship between maintenance approaches and production methods. A survey was done to determine to what extent three maintenance approaches reliability-centred maintenance (RCM, total productive maintenance (TPM, and business-centred maintenance (BCM are used for three different processing methods (continuous process, batch process, and a production line method.

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

Support Operators Method for the Diffusion Equation in Multiple Materials

Energy Technology Data Exchange (ETDEWEB)

Winters, Andrew R. [Los Alamos National Laboratory; Shashkov, Mikhail J. [Los Alamos National Laboratory

2012-08-14

A second-order finite difference scheme for the solution of the diffusion equation on non-uniform meshes is implemented. The method allows the heat conductivity to be discontinuous. The algorithm is formulated on a one dimensional mesh and is derived using the support operators method. A key component of the derivation is that the discrete analog of the flux operator is constructed to be the negative adjoint of the discrete divergence, in an inner product that is a discrete analog of the continuum inner product. The resultant discrete operators in the fully discretized diffusion equation are symmetric and positive definite. The algorithm is generalized to operate on meshes with cells which have mixed material properties. A mechanism to recover intermediate temperature values in mixed cells using a limited linear reconstruction is introduced. The implementation of the algorithm is verified and the linear reconstruction mechanism is compared to previous results for obtaining new material temperatures.

Group decision support system for customer-driven product design

Science.gov (United States)

Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

2000-10-01

This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

Effects of social support at work on depression and organizational productivity.

Science.gov (United States)

Park, Kyoung-Ok; Wilson, Mark G; Lee, Myung Sun

2004-01-01

To examine how social support at work affects depression and organizational productivity in a work-stress framework. A self-administered survey for 240 workers in a public hospital in the southeastern United States. Social support at work was directly related to high job control, low depression, and high job performance. Social support did not buffer the negative effects of work factors on depression and organizational productivity. Social support at work had a direct and beneficial effect on workers' psychological well-being and organizational productivity without any interaction effect on the work-stress framework.

Strategy of Trade-Reliable Featured Product Supporting Regional Innovation Systems

Science.gov (United States)

Riskiawan, H. Y.; Purnomo, B. H.; Abdurahman, A.; Hariono, B.; Puspitasari, T. D.

2018-01-01

Pacitan, Ponorogo, and Magetan had planned the development of featured products as contained in the Medium Term Development Plan (MTDP) until 2020. The focus of development is almost similar to featured products derived from agribusiness, food processing, handycrafts, and tourism. The geographical proximity results characteristics of natural resources and social culture have similarities, including the type of featured products, constraints, problems, and opportunities for development. Given the characteristics and the support system of some featured products contained in these three regions have a lot in common and their functional interactions involving actors from across the region, it is necessary to develop cross-jurisdictional policy. The resulting strategy should be able to support the development of Regional Innovation System (RIS). The purpose of this research is 1) Determining featured product cross-regional between Pacitan regency; Ponorogo and Magetan districts in support of RIS development; and 2) Designing a featured product development strategy using supply chain management in order to drive the local economy. Based on the results of research conducted, featured products across the region that have potentiality to be developed are: processed products of “janggelan” leather products, and woven bamboo.

Framework for product knowledge and product related knowledge which supports product modelling for mass customization

DEFF Research Database (Denmark)

Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

2003-01-01

on experience from product modelling projects in several companies. Among them for example companies manufacturing electronic switchboards, spray dryer systems and air conditioning equipment. The framework is divided into three views: the product knowledge view, the life phase system view and the transformation...... and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

Selecting Products Considering the Regret Behavior of Consumer: A Decision Support Model Based on Online Ratings

Directory of Open Access Journals (Sweden)

Xia Liang

2018-05-01

Full Text Available With the remarkable promotion of e-commerce platforms, consumers increasingly prefer to purchase products online. Online ratings facilitate consumers to choose among products. Thus, to help consumers effectively select products, it is necessary to provide decision support methods for consumers to trade online. Considering the decision makers are bounded rational, this paper proposes a novel decision support model for product selection based on online ratings, in which the regret aversion behavior of consumers is formulated. Massive online ratings provided by experienced consumers for alternative products associated with several evaluation attributes are obtained by software finders. Then, the evaluations of alternative products in format of stochastic variables are conducted. To select a desirable alternative product, a novel method is introduced to calculate gain and loss degrees of each alternative over others. Considering the regret behavior of consumers in the product selection process, the regret and rejoice values of alternative products for consumer are computed to obtain the perceived utility values of alternative products. According to the prior order of the evaluation attributes provided by the consumer, the prior weights of attributes are determined based on the perceived utility values of alternative products. Furthermore, the overall perceived utility values of alternative products are obtained to generate a ranking result. Finally, a practical example from Zol.com.cn for tablet computer selection is used to demonstrate the feasibility and practically of the proposed model.

Product carbon footprint assessment supporting the green supply chain construction in household appliance manufacturers

Science.gov (United States)

Chen, Jianhua; Sun, Liang; Guo, Huiting

2017-11-01

Supply chain carbon emission is one of the factors considered in the green supply chain management. A method was designed to support the green supply chain measures based on the carbon footprint assessment for products. A research for 3 typical household appliances carbon footprint assessment was conducted to explore using product carbon footprint assessment method to guide the green supply chain management of the manufacturers. The result could reflect the differences directions on green supply chain management of manufacturers of washing machine, air conditioner and microwave, respectively That is, the washing machine manufacturer should pay attention to the low carbon activities in upstream suppliers in highest priority, and also the promotion of product energy efficiency. The air conditioner manufacturer should pay attention to the product energy efficiency increasing in highest priority, and the improvement of refrigerant to decrease its GWP. And the microwave manufacture could only focus on the energy efficiency increasing because it contributes most of the carbon emission to its carbon footprint. Besides, the representativeness of product and the applicability of the method were also discussed. As the manufacturer could master the technical information on raw material and components of its products to conduct the product carbon footprint assessment, this method could help the manufacturer to identify the effective green supply chain measures in the preliminary stage.

Production of fungal antibiotics using polymeric solid supports in solid-state and liquid fermentation.

Science.gov (United States)

Bigelis, Ramunas; He, Haiyin; Yang, Hui Y; Chang, Li-Ping; Greenstein, Michael

2006-10-01

The use of inert absorbent polymeric supports for cellular attachment in solid-state fungal fermentation influenced growth, morphology, and production of bioactive secondary metabolites. Two filamentous fungi exemplified the utility of this approach to facilitate the discovery of new antimicrobial compounds. Cylindrocarpon sp. LL-Cyan426 produced pyrrocidines A and B and Acremonium sp. LL-Cyan416 produced acremonidins A-E when grown on agar bearing moist polyester-cellulose paper and generated distinctly different metabolite profiles than the conventional shaken or stationary liquid fermentations. Differences were also apparent when tenfold concentrated methanol extracts from these fermentations were tested against antibiotic-susceptible and antibiotic-resistant Gram-positive bacteria, and zones of inhibition were compared. Shaken broth cultures of Acremonium sp. or Cylindrocarpon sp. showed complex HPLC patterns, lower levels of target compounds, and high levels of unwanted compounds and medium components, while agar/solid support cultures showed significantly increased yields of pyrrocidines A and B and acremonidins A-E, respectively. This method, mixed-phase fermentation (fermentation with an inert solid support bearing liquid medium), exploited the increase in surface area available for fungal growth on the supports and the tendency of some microorganisms to adhere to solid surfaces, possibly mimicking their natural growth habits. The production of dimeric anthraquinones by Penicillium sp. LL-WF159 was investigated in liquid fermentation using various inert polymeric immobilization supports composed of polypropylene, polypropylene cellulose, polyester-cellulose, or polyurethane. This culture produced rugulosin, skyrin, flavomannin, and a new bisanthracene, WF159-A, after fermentation in the presence and absence of polymeric supports for mycelial attachment. The physical nature of the different support systems influenced culture morphology and relative

PREFER: a European service providing forest fire management support products

Science.gov (United States)

Eftychidis, George; Laneve, Giovanni; Ferrucci, Fabrizio; Sebastian Lopez, Ana; Lourenco, Louciano; Clandillon, Stephen; Tampellini, Lucia; Hirn, Barbara; Diagourtas, Dimitris; Leventakis, George

2015-06-01

PREFER is a Copernicus project of the EC-FP7 program which aims developing spatial information products that may support fire prevention and burned areas restoration decisions and establish a relevant web-based regional service for making these products available to fire management stakeholders. The service focuses to the Mediterranean region, where fire risk is high and damages from wildfires are quite important, and develop its products for pilot areas located in Spain, Portugal, Italy, France and Greece. PREFER aims to allow fire managers to have access to online resources, which shall facilitate fire prevention measures, fire hazard and risk assessment, estimation of fire impact and damages caused by wildfire as well as support monitoring of post-fire regeneration and vegetation recovery. It makes use of a variety of products delivered by space borne sensors and develop seasonal and daily products using multi-payload, multi-scale and multi-temporal analysis of EO data. The PREFER Service portfolio consists of two main suite of products. The first refers to mapping products for supporting decisions concerning the Preparedness/Prevention Phase (ISP Service). The service delivers Fuel, Hazard and Fire risk maps for this purpose. Furthermore the PREFER portfolio includes Post-fire vegetation recovery, burn scar maps, damage severity and 3D fire damage assessment products in order to support relative assessments required in context of the Recovery/Reconstruction Phase (ISR Service) of fire management.

Methods for Attributing Land-Use Emissions to Products

Science.gov (United States)

Davis, S. J.; Burney, J. A.; Pongratz, J.; Caldeira, K.

2014-12-01

Roughly one-third of anthropogenic GHG emissions are caused by agricultural and forestry activities and land-use change (collectively, 'land-use emissions'). Understanding the ultimate drivers of these emissions requires attributing emissions to specific land-use activities and products. Although quantities of land-use emissions are matters of fact, the methodological choices and assumptions required to attribute those emissions to activities and products depend on research goals and data availability. We will demonstrate several possible accounting methods, highlighting the sensitivity of accounting to temporal distributions of emissions and the consequences of replacing spatially-explicit data with aggregate proxies such as production or harvested area data. Different accounting options emphasize different causes of land-use emissions (e.g., proximate or indirect drivers of deforestation). To support public policies that effectively balance competing objectives, analysts should carefully consider and communicate implications of accounting choices.

Energy management in production: A novel method to develop key performance indicators for improving energy efficiency

International Nuclear Information System (INIS)

May, Gökan; Barletta, Ilaria; Stahl, Bojan; Taisch, Marco

2015-01-01

Highlights: • We propose a 7-step methodology to develop firm-tailored energy-related KPIs (e-KPIs). • We provide a practical guide for companies to identify their most important e-KPIs. • e-KPIs support identification of energy efficiency improvement areas in production. • The method employs an action plan for achieving energy saving targets. • The paper strengthens theoretical base for energy-based decision making in manufacturing. - Abstract: Measuring energy efficiency performance of equipments, processes and factories is the first step to effective energy management in production. Thus, enabled energy-related information allows the assessment of the progress of manufacturing companies toward their energy efficiency goals. In that respect, the study addresses this challenge where current industrial approaches lack the means and appropriate performance indicators to compare energy-use profiles of machines and processes, and for the comparison of their energy efficiency performance to that of competitors’. Focusing on this challenge, the main objective of the paper is to present a method which supports manufacturing companies in the development of energy-based performance indicators. For this purpose, we provide a 7-step method to develop production-tailored and energy-related key performance indicators (e-KPIs). These indicators allow the interpretation of cause-effect relationships and therefore support companies in their operative decision-making process. Consequently, the proposed method supports the identification of weaknesses and areas for energy efficiency improvements related to the management of production and operations. The study therefore aims to strengthen the theoretical base necessary to support energy-based decision making in manufacturing industries

Determination production costs using PBC method

Directory of Open Access Journals (Sweden)

Todić Vladimir V.

2014-01-01

Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

MODERN METHODS OF REASONABLE PRODUCT SUPPLY

Directory of Open Access Journals (Sweden)

Anna Kulik

2016-11-01

Full Text Available Thesis objective is to study modern methods of product supply with the purpose to determine optimal ways for their rationalization. Since the use of reasonable practices, taking into account external and internal factors under the specific conditions of product moving from the supplier to the buyer, makes the process of product supply economically viable, i.e., low costs for product transportation, ensures fast moving products, their safety and, ultimately, results in reduction of the costs of product disposal. Methodology. The study is based on theoretical methods to study this problem. System analysis method and simulation of the ways to improve were also used in the study. Results. Addressing these issues, the concept, form and stages of product supply process organization depending on the type of product have been studied; product supply management methods based on logistics concept of “demand response”. Practical significance. Optimization of the principles and methods of product supply, factors affecting its organization will, in practice, contribute to the development of reasonable product delivery systems featured with economic efficiency of advanced technologies of product supply. Value/ originality. The analyzed methods of product supply management based on logistics concept of “demand response” can ensure maximum reduction of response time to the changes in demand by rapid stocktaking at those points of the market where the demand is expected to increase, which will allow to reduce the costs of bringing the product to the consumer.

Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

Directory of Open Access Journals (Sweden)

Yan-Yan Wang

2011-09-01

Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

It Systems Supporting the Management of Production Capacity

Science.gov (United States)

Milewska, Elżbieta

2017-03-01

The paper presents the problem of manufacturing process flexibility in view of a company's material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

IT SYSTEMS SUPPORTING THE MANAGEMENT OF PRODUCTION CAPACITY

OpenAIRE

Elżbieta MILEWSKA

2017-01-01

The paper presents the problem of manufacturing process flexibility in view of a company’s material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

When do ruling elites support productive sectors?

DEFF Research Database (Denmark)

Kjær, Anne Mette

that the ruling elite initially supported the fishing industry because of industry pressure. They have failed to enforce fisheries management because there are big political costs associated with such enforcement. The dairy sector in the southwestern milk region was initially supported because the ruling elite......This paper explains the differences in ruling elite support for the fisheries and dairy sectors in Uganda. Although production in Uganda has not generally been promoted in any sustained way, ruling elites have to varying degrees supported the dairy and fisheries sectors. The paper shows...... wanted to build a coalition of support in this region. Coming from the region himself, the president had a keen interest in dairy cattle. The sector was subsequently regulated because the biggest processor put pressure on the ruling elite to do so. Even when the ruling coalition is fragmented, promoting...

Carbon-Supported Fe Catalysts for CO2 Electroreduction to High-Added Value Products: A DEMS Study: Effect of the Functionalization of the Support

OpenAIRE

Pérez-Rodríguez, S.; García, G.; Calvillo, L.; Celorrio, V.; Pastor, E.; Lázaro, M. J.

2011-01-01

Vulcan XC-72R-supported Fe catalysts have been synthesised for the electroreduction of CO2 to high-added value products. Catalysts were obtained by the polyol method, using ethylene glycol as solvent and reducing agent. Prior to the metal deposition, Vulcan was subjected to different oxidation treatments in order to modify its surface chemistry and study its influence on the physicochemical and electrochemical properties of the catalysts, as well as on the product distribution. The oxidation ...

IT SYSTEMS SUPPORTING THE MANAGEMENT OF PRODUCTION CAPACITY

Directory of Open Access Journals (Sweden)

Elżbieta MILEWSKA

2017-01-01

Full Text Available The paper presents the problem of manufacturing process flexibility in view of a company’s material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

Designing future products: what difficulties do designers encounter and how can their creative process be supported?

Science.gov (United States)

Bonnardel, Nathalie

2012-01-01

To remain competitive, companies must regularly offer new products to consumers. A major challenge for designers is therefore to come up with design solutions and define products that are both new and adapted to future users and usages. Although classic methods and ergonomic recommendations are useful in most run-of-the-mill design contexts, they are of limited benefit when the design situation requires greater creativity. This paper therefore addresses issues related to product design by pursuing a triple objective: (1) highlight the difficulties encountered by designers in imagining and conceiving new products, (2) find out which conditions could help designers come up with creative ideas for innovative products, and (3) suggest methods and tools to support designers' creative process and help them take other stakeholders' needs and expectations into consideration.

Research on knowledge support technology for product innovation design based on quality function knowledge deployment

Directory of Open Access Journals (Sweden)

Kai Zhang

2016-06-01

Full Text Available Based on the analysis of the relationship between the process of product innovation design and knowledge, this article proposes a theoretical model of quality function knowledge deployment. In order to link up the product innovation design and the knowledge required by the designer, the iterative method of quality function knowledge deployment is refined, as well as the knowledge retrieval model and knowledge support model based on quality function knowledge deployment are established. In the whole life cycle of product design, in view of the different requirements for knowledge in conceptual design stage, components’ configuration stage, process planning stage, and production planning stage, the quality function knowledge deployment model could link up the required knowledge with the engineering characteristics, component characteristics, process characteristics, and production characteristics in the four stages using the mapping relationship between the function characteristics and the knowledge and help the designer to track the required knowledge for realizing product innovation design. In this article, an instance about rewinding machine is given to demonstrate the practicability and validity of product innovation design knowledge support technology based on quality function knowledge deployment.

Towards a Tool for Computer Supported Structuring of Products

DEFF Research Database (Denmark)

Hansen, Claus Thorp

1997-01-01

. However, a product possesses not only a component structure but also various organ structures which are superimposed on the component structure. The organ structures carry behaviour and make the product suited for its life phases.Our long-term research goal is to develop a computer-based system...... that is capable of supporting synthesis activities in engineering design, and thereby also support handling of various organ structures. Such a system must contain a product model, in which it is possible to describe and manipulate both various organ structures and the component structure.In this paper we focus...... on the relationships between organ structures and the component structure. By an analysis of an existing product it is shown that a component may contribute to more than one organ. A set of organ structures is identified and their influence on the component strucute is illustrated....

Hydrogen production by steam reforming of liquefied natural gas over a nickel catalyst supported on mesoporous alumina xerogel

Science.gov (United States)

Seo, Jeong Gil; Youn, Min Hye; Cho, Kyung Min; Park, Sunyoung; Song, In Kyu

Mesoporous alumina xerogel (A-SG) is prepared by a sol-gel method for use as a support for a nickel catalyst. The Ni/A-SG catalyst is then prepared by an impregnation method, and is applied to hydrogen production by steam reforming of liquefied natural gas (LNG). The effect of the mesoporous alumina xerogel support on the catalytic performance of Ni/A-SG catalyst is investigated. For the purpose of comparison, a nickel catalyst supported on commercial alumina (A-C) is also prepared by an impregnation method (Ni/A-C). Both the hydroxyl-rich surface and the electron-deficient sites of the A-SG support enhance the dispersion of the nickel species on the support during the calcination step. The formation of the surface nickel aluminate phase in the Ni/A-SG catalyst remarkably increases the reducibility and stability of the catalyst. Furthermore, the high-surface area and the well-developed mesoporosity of the Ni/A-SG catalyst enhance the gasification of surface hydrocarbons that are adsorbed in the reaction. In the steam reforming of LNG, the Ni/A-SG catalyst exhibits a better catalytic performance than the Ni/A-C catalyst in terms of LNG conversion and hydrogen production. Moreover, the Ni/A-SG catalyst shows strong resistance toward catalyst deactivation.

Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

Science.gov (United States)

Klāvs, G.; Kundziņa, A.; Kudrenickis, I.

2016-10-01

Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 - the investment support (IS) and the feed-in tariff (FIT) - on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation) is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors' estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

Directory of Open Access Journals (Sweden)

Klāvs G.

2016-10-01

Full Text Available Use of renewable energy sources (RES might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS and the feed-in tariff (FIT – on the economic viability of small scale (up to 2MWel biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors’ estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

Plasma processing methods for hydrogen production

International Nuclear Information System (INIS)

Mizeraczyk, J.; Jasinski, M.

2016-01-01

In the future a transfer from the fossil fuel-based economy to hydrogen-based economy is expected. Therefore the development of systems for efficient H_2 production becomes important. The several conventional methods of mass-scale (or central) H_2 production (methane, natural gas and higher hydrocarbons reforming, coal gasification reforming) are well developed and their costs of H_2 production are acceptable. However, due to the H_2 transport and storage problems the small-scale (distributed) technologies for H_2 production are demanded. However, these new technologies have to meet the requirement of producing H_2 at a production cost of $(1-2)/kg(H_2) (or 60 g(H_2)/kWh) by 2020 (the U.S. Department of Energy's target). Recently several plasma methods have been proposed for the small-scale H_2 production. The most promising plasmas for this purpose seems to be those generated by gliding, plasmatron and nozzle arcs, and microwave discharges. In this paper plasma methods proposed for H_2 production are briefly described and critically evaluated from the view point of H_2 production efficiency. The paper is aiming at answering a question if any plasma method for the small-scale H_2 production approaches such challenges as the production energy yield of 60 g(H_2)/kWh, high production rate, high reliability and low investment cost. (authors)

Method of production of a diaphragm for instruments in particle optics and diaphragm fabricated by this method

International Nuclear Information System (INIS)

Sandrik, J.; Krohne, P.

1975-01-01

The production method of, e.g., a circular diaphragm for an electron microscope is based on copper plate as supporting material. A light-sensitive, electrically insulating layer is coated on this. After exposing and freeing the positions of this layer, e.g., the circular interior as well as the cross-piece to the exterior of the diaghragm, a galvanic building-up of a noble metal layer follows, e.g. gold, on these now free positions. After freeing the remaining non-exposed material, an etching-protective lacquer is coated on the positions of the supporting material which are to be maintained. The remaining parts of the supporting material are then removed by positive etching. (DG/LH) [de

Hybrid robust deep and shallow semantic processing for creativity support in document production

OpenAIRE

Uszkoreit, Hans; Callmeier, Ulrich; Eisele, Andreas; Schäfer, Ulrich; Siegel, Melanie

2004-01-01

The research performed in the DeepThought project (http://www.project-deepthought.net) aims at demonstrating the potential of deep linguistic processing if added to existing shallow methods that ensure robustness. Classical information retrieval is extended by high precision concept indexing and relation detection. We use this approach to demonstrate the feasibility of three ambitious applications, one of which is a tool for creativity support in document production and collective brainstormi...

A water productive and economically profitable paddy rice production method to adapt water scarcity in the Vu Gia-Thu Bon river basin, Vietnam

Directory of Open Access Journals (Sweden)

Bhone Nay-Htoon

2013-05-01

Full Text Available In Vu Gia-Thu Bon river basin, Vietnam, drought during the dry season affected negatively on rice production. High and uneven rainfall distribution cause flooding in the basin during wet season and cause severe agricultural drought during dry season.This study aimed to point out a higher water productive and economically efficient rice production method to adapt water scarcity in the region. Based on available secondary data, water productivity is calculated for different water saving rice production methods, according to Pereira, et al, (2012’s irrigation water productivity and total productivity equations. The profit of technological change is calculated by partial budget analysis of rice production in that area and a sensitivity analysis supports to point out which input factor is sensitive to farmer’s benefit. Farmer’s psychological and social beliefs are used to create fuzzy logic based decision making model. Although water productivities (ranging 0.441 kg/m3/ha to 0.504 kg/m3/ha are ranked as the second after System of Rice Intensification, we demonstrated that Alternate Wetting and Drying method is a recommendable method to the farmer after considering economic profitability and technical simplicity. The System of Rice Intensification method also could be a suitable method to adopt because this method is the highest water productive method (Water Productivities are ranging from 0.77 kg/m3/ha to 1.02 kg/m3/ha coupled with highest yield of rice, subject to certain ecosystem services and payment policies should be developed to subsidize the reduced benefit resulting from this method.

Hybrid Lanczos-type product methods

Energy Technology Data Exchange (ETDEWEB)

Ressel, K.J. [Swiss Center for Scientific Computing, Zuerich (Switzerland)

1996-12-31

A general framework is proposed to construct hybrid iterative methods for the solution of large nonsymmetric systems of linear equations. This framework is based on Lanczos-type product methods, whose iteration polynomial consists of the Lanczos polynomial multiplied by some other arbitrary, {open_quotes}shadow{close_quotes} polynomial. By using for the shadow polynomial Chebyshev (more general Faber) polynomials or L{sup 2}-optimal polynomials, hybrid (Chebyshev-like) methods are incorporated into Lanczos-type product methods. In addition, to acquire spectral information on the system matrix, which is required for such a choice of shadow polynomials, the Lanczos-process can be employed either directly or in an QMR-like approach. The QMR like approach allows the cheap computation of the roots of the B-orthogonal polynomials and the residual polynomials associated with the QMR iteration. These roots can be used as a good approximation for the spectrum of the system matrix. Different choices for the shadow polynomials and their construction are analyzed. The resulting hybrid methods are compared with standard Lanczos-type product methods, like BiOStab, BiOStab({ell}) and BiOS.

The Controlled Ecological Life Support System Antarctic Analog Project: Prototype Crop Production and Water Treatment System Performance

Science.gov (United States)

Bubenheim, David L.; Flynn, Michael T.; Bates, Maynard; Schlick, Greg; Kliss, Mark (Technical Monitor)

1997-01-01

The Controlled Ecological Life Support System (CELSS) Antarctic Analog Project (CAAP), is a joint endeavor between the National Science Foundation, Office of Polar Programs (NSF-OPP) and the NASA. The fundamental objective is to develop, deploy, and operate a testbed of advanced life support technologies at the Amundsen-Scott South Pole Station that enable the objectives of both the NSF and NASA. The functions of food production, water purification, and waste treatment, recycle and reduction provided by CAAP will improve the quality of life for the South Pole inhabitants, reduce logistics dependence, enhance safety and minimize environmental impacts associated with human presence on the polar plateau. Because of the analogous technical, scientific, and mission features with Planetary missions such as a mission to Mars, CAAP provides NASA with a method for validating technologies and overall approaches to supporting humans. Prototype systems for sewage treatment, water recycle and crop production are being evaluated at Ames Research Center. The product water from sewage treatment using a Wiped-Film Rotating Disk is suitable for input to the crop production system. The crop production system has provided an enhanced level of performance compared with projected performance for plant-based life support: an approximate 50% increase in productivity per unit area, more than a 65% decrease in power for plant lighting, and more than a 75% decrease in the total power requirement to produce an equivalent mass of edible biomass.

Progress in the methods of steel production

Energy Technology Data Exchange (ETDEWEB)

Onodera, S; Suzuki, K

1979-07-01

The steel making and ingot making processes have made a great progress in the past two decades, which has been one of the direct supports for developing those megalo-technologies as in iron and steel making, petrochemical, fossil and nuclear power generation, and other industries. In discussing steel quality, large or small, everything is to the ingot, and in order to reduce miscellaneous imperfections in steel ingots, for largest ones in particular, tremendous efforts have been made so far. In addition to the improvements in conventional ingot making method, a number of innovational techniques were developed such as ESR, PESC, ABR, MHKW, BEST, etc. with some results in respective fields of application. Nevertheless, for largest sizes of ingot from 250 to 500 tons, the conventional method was successful enough. The history of conventional method is summarized for the past quarter century. The improved quality of large ingots could bring some more merits in the final forged products, which are: (1) improved isotropy of mechanial properties; and (2) sufficnet effect of forging with much less forging ratio.

Progress in the methods of steel-production

International Nuclear Information System (INIS)

Onodera, S.

1979-01-01

The steel making and ingot making processes have made a great progress in the past two decades, which has been one of the direct supports for developing those megalo-technologies as in iron and steel making, petrochemical, fossil and nuclear power generation, and other industries. In discussing steel quality, large or small, everything is to the ingot, and in order to reduce miscellaneous imperfections in steel ingots, for largest ones in particular, tremendous efforts have been made so far. In addition to the improvements in conventional ingot making method, a number of innovational techniques were developed such as ESR, PESC, ABR, MHKW, BEST, etc. with some results in respective fields of application. Nevertheless, for largest sizes of ingot from 250 to 500 tons, the conventional method was successful enough. The history of conventional method is summarized for the past quarter century. The improved quality of large ingots could bring some more merits in the final forged products, which are: 1) Improved isotropy of mechanical properties, 2) sufficient effect of forging with much less forging ratio. (orig./HJ) [de

Spatial support of knowledge production in higher education

OpenAIRE

Groen, B.H. (Brenda); Sprang, van, H. (Hester); Voordt, van der, T.J.M. (Theo)

2014-01-01

This paper explores the impact of the physical and social dimensions of the work environment on  satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) a...

Spatial support of knowlegde production in higher education

OpenAIRE

Groen, B. (Brenda); Sprang, van, H. (Hester); Voordt, van der, T.J.M. (Theo)

2013-01-01

This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

Using the analytic hierarchy process to support teams in defining new product objectives

NARCIS (Netherlands)

Hummel, J.M.; Verkerke, G.J.; van Rossum, W.; Rakhorst, G.; Hummel, J.M.

2001-01-01

Defining new product objectives is a critical problem solving activity to new product success. The analytic hierarchy process appears to be an adequate technique for multi-criteria decision analysis to support the definition of new product objectives. To illustrate this support, we applied this

Production capability: ERDA methods and results

International Nuclear Information System (INIS)

Klemenic, J.

1977-01-01

Production centers are categorized into four classes, according to the relative certainty of future production. A ''forward cost'' basis is used to establish both the resource base and to define the acceptable production centers. The first phase of the work is called the ''Could'' capability. Resources are assigned to existing production centers, or new production centers are postulated based on adequate resources to support a mill for a reasonable economic life. A production schedule is developed for each center. The last step in the ''Could'' study is to aggregate the capital and operating costs. The final step in the Production Capability study is the rescheduling of the production from the ''Could'' to produce only sufficient U concentrate to meet the feed requirements of enrichment facilities operated at the announced transaction tails assay plans. The optimized production schedules are called the ''Need'' production capability. A separate study was also performed of industry production plans. 4 tables, 7 figs

Generic methods for design of small-bore pipe supports

International Nuclear Information System (INIS)

Clark, G.L.; LaSalle, F.R.

1981-01-01

Large numbers of supports for small-bore, low-temperature pipe are utilized in nuclear power plants. These supports often must meet ASME code and project seismic design requirements. Detailed analysis for each support is time consuming and costly. This paper describes some economical generic methods developed to design and qualify supports for two-inch and smaller pipe operating at temperatures less than 300 0 F (185 0 C), on the Fast Flux Test Facility. Use of standard designs, standard support spacing tables, anchor bolt and baseplate considerations, and field qualification methods are discussed

Universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support

Directory of Open Access Journals (Sweden)

Tkachenko Sergіy A.

2013-03-01

Full Text Available The goal of the article lies in formation of a paradigm (sample of universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support. Analysing, systemising and generalising scientific works of many economists, the article describes ways of solution of the problem of organisation of works on planning and introducing the accounting function at industrial enterprises and in production associations – individual planning, increase of a number of organisations that plan functionally developed accounting subsystem and training of relevant specialists. In the result of the study the article realises an important direction of development in improvement of organisation of accounting and economic and analytical support at industrial enterprises and in production associations based on uniformity of project decisions on the subsystem of the accounting and analytical support and functional development of the process of its creation. The issue of organisation of the calculation process while planning and introducing the accounting function in functionally developed management systems of special purpose of industrial enterprises and production associations is of special urgency among the prospects of further studies in this direction. Further development of accounting can result in replacement of traditional accounting with functionally developed subsystem of accounting and analytical support with intensive use of the concept of methodologically justified paradigmatic approach.

Collaborative networks in support of service-enhanced products

NARCIS (Netherlands)

Camarinha-Matos, L.M.; Afsarmanesh, H.; Koelmel, B.

2011-01-01

The development and support of highly customized and service-enhanced products requires new organizational structures, involving the manufacturers, customers and local suppliers in a process of co-creation. This requires the implementation of the glocal enterprise notion with value creation from

QUANTIFYING SUPPLIERS’ PRODUCT QUALITY: AN EXPLORATORY PRODUCT AUDIT METHOD

Directory of Open Access Journals (Sweden)

S. Avakh Darestani

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The quality of the raw material and supplied product from suppliers plays a critical role in the quality of the final product. It has become the norm that vehicle manufacturers require their suppliers to measure product quality and service with a product audit method. Measuring quality of product is emphasised by QS9000 VDA6.5 and ISO/TS16949. From a competitive standpoint, and also to see continuous improvement in business, companies need to monitor their suppliers’ performance. Quality and delivery are two very important indicators of supplier performance. This paper presents a statistical method for measuring the quality of supplied product. This method allocates different weights to variables and attributes characteristics. Moreover, following normal distribution, the tolerance zone is divided to three regions with different scores. Therefore, the quality of suppliers’ products can be monitored based on the Product Quality Audit Score (PQAS. However, this method may be employed for organisations to monitor their raw material, work-in-process parts, and final product. It can be an indicator to monitor supplier quality behaviour.

AFRIKAANSE OPSOMMING: Die gehalte van grondstowwe en produkte/komponente wat deur leweransiers verskaf word, speel ‘n kritiese rol in die gehalte van die finale produk. Dit het die norm geword in die motorvervaardigingsbedryf dat daar van leweransiers verwag word om hulle produkkwaliteit en –diens te meet by wyse van ‘n produkouditmetode. Die meting van produkkwaliteit word benadruk deur QS9000 VDA6.5 en ISO/TS16949. Uit ‘n mededingingshoek en ook om kontinue verbetering te monitor, is dit noodsaaklik dat leweransiers se verrigting gemeet word. Gehalte en aflewering is twee van die belangrikste indikatore van leweransiersverrigting. In hierdie artikel word ‘n statistiese model voorgehou vir die meting van die kwaliteit van die gelewerde produk. Die metode ken verskillende

Determination of impurities and degradation products from veterinary medicinal products by HPLC method

Directory of Open Access Journals (Sweden)

Elena Gabriela Oltean

2014-06-01

Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

New product development with dynamic decision support

CSIR Research Space (South Africa)

Venter, Jacobus P

2009-06-01

Full Text Available The development of new and improved management methods for new product development is important. Existing methods suffer from a number of shortcomings, especially their inability to deal with a mixture of quantitative and qualitative data...

A web-based system for supporting global land cover data production

Science.gov (United States)

Han, Gang; Chen, Jun; He, Chaoying; Li, Songnian; Wu, Hao; Liao, Anping; Peng, Shu

2015-05-01

Global land cover (GLC) data production and verification process is very complicated, time consuming and labor intensive, requiring huge amount of imagery data and ancillary data and involving many people, often from different geographic locations. The efficient integration of various kinds of ancillary data and effective collaborative classification in large area land cover mapping requires advanced supporting tools. This paper presents the design and development of a web-based system for supporting 30-m resolution GLC data production by combining geo-spatial web-service and Computer Support Collaborative Work (CSCW) technology. Based on the analysis of the functional and non-functional requirements from GLC mapping, a three tiers system model is proposed with four major parts, i.e., multisource data resources, data and function services, interactive mapping and production management. The prototyping and implementation of the system have been realised by a combination of Open Source Software (OSS) and commercially available off-the-shelf system. This web-based system not only facilitates the integration of heterogeneous data and services required by GLC data production, but also provides online access, visualization and analysis of the images, ancillary data and interim 30 m global land-cover maps. The system further supports online collaborative quality check and verification workflows. It has been successfully applied to China's 30-m resolution GLC mapping project, and has improved significantly the efficiency of GLC data production and verification. The concepts developed through this study should also benefit other GLC or regional land-cover data production efforts.

A Hierarchical Approach Using Machine Learning Methods in Solar Photovoltaic Energy Production Forecasting

OpenAIRE

Zhaoxuan Li; SM Mahbobur Rahman; Rolando Vega; Bing Dong

2016-01-01

We evaluate and compare two common methods, artificial neural networks (ANN) and support vector regression (SVR), for predicting energy productions from a solar photovoltaic (PV) system in Florida 15 min, 1 h and 24 h ahead of time. A hierarchical approach is proposed based on the machine learning algorithms tested. The production data used in this work corresponds to 15 min averaged power measurements collected from 2014. The accuracy of the model is determined using computing error statisti...

New product development with dynamic decision support

CSIR Research Space (South Africa)

Venter, JP

2007-08-01

Full Text Available The development of new and improved management methods for new product development is important. Existing methods suffer from a number of shortcomings, especially the ability to deal with a mixture of quantitative and qualitative data. The objective...

Collaborative Development Planning Model of Supporting Product in Platform Innovation Ecosystem

OpenAIRE

Wei Zhang; Hamid Reza Karimi; Qingpu Zhang; Shaobo Wu

2014-01-01

Published version of an article in the journal: Mathematical Problems in Engineering. Also available from the publisher at: http://10.1155/2014/690589 In order to improve the market value of the product, the platform enterprise often participates in the development process of supporting product of emerging industry's platform innovation ecosystem. This paper puts forward a revenue sharing contract between the platform company and the supporting company by creating a collaborative developme...

Production cost methods and data

Science.gov (United States)

Jeffe, R. E.; Fujita, T.

1975-01-01

The general gas cost equation for utility financing is presented. Modifications and assumptions made in order to apply the cost equation to hydrogen production are described. Cost data are given for various methods of hydrogen production. The cost matrix procedure is briefly discussed.

Product demand forecasts using wavelet kernel support vector machine and particle swarm optimization in manufacture system

Science.gov (United States)

Wu, Qi

2010-03-01

Demand forecasts play a crucial role in supply chain management. The future demand for a certain product is the basis for the respective replenishment systems. Aiming at demand series with small samples, seasonal character, nonlinearity, randomicity and fuzziness, the existing support vector kernel does not approach the random curve of the sales time series in the space (quadratic continuous integral space). In this paper, we present a hybrid intelligent system combining the wavelet kernel support vector machine and particle swarm optimization for demand forecasting. The results of application in car sale series forecasting show that the forecasting approach based on the hybrid PSOWv-SVM model is effective and feasible, the comparison between the method proposed in this paper and other ones is also given, which proves that this method is, for the discussed example, better than hybrid PSOv-SVM and other traditional methods.

Methods of Computational Intelligence in the Context of Quality Assurance in Foundry Products

Directory of Open Access Journals (Sweden)

Rojek G.

2016-06-01

Full Text Available One way to ensure the required technical characteristics of castings is the strict control of production parameters affecting the quality of the finished products. If the production process is improperly configured, the resulting defects in castings lead to huge losses. Therefore, from the point of view of economics, it is advisable to use the methods of computational intelligence in the field of quality assurance and adjustment of parameters of future production. At the same time, the development of knowledge in the field of metallurgy, aimed to raise the technical level and efficiency of the manufacture of foundry products, should be followed by the development of information systems to support production processes in order to improve their effectiveness and compliance with the increasingly more stringent requirements of ergonomics, occupational safety, environmental protection and quality. This article is a presentation of artificial intelligence methods used in practical applications related to quality assurance. The problem of control of the production process involves the use of tools such as the induction of decision trees, fuzzy logic, rough set theory, artificial neural networks or case-based reasoning.

Quality estimation methods used in product life cycle

OpenAIRE

M. Dudek-Burlikowska; D. Szewieczek

2007-01-01

Purpose: A new approach to quality control in production company with usage of quality research methods has been presented.Design/methodology/approach: The possibility of usage of quality research methods are connected with continuous quality improvement of pre-production, production and after-production spheres of organization. Interdependence of the quality research methods and product life cycle has been taken into account.Findings: At the present time the enterprises should integrate qua...

Technology and Products Supporting E-learning by Knowledge Management - A Review

Directory of Open Access Journals (Sweden)

Ying Wang

2014-06-01

Full Text Available Abstract—Knowledge management is supported by many strategies such as business intelligence, collaboration, document management and e-learning. With the development of modern information technology and the increases of demand for building and maintaining dynamic capabilities, E-learning has played more and more important role of all the technologies in the supporting knowledge management. A successful e-learning system is supported by many critical success factors and technology has become the key factor among these factors. Consequently, the review of basic technologies and corresponding products that support e-learning will be in favor of further study on e-learning. From perspective of knowledge management, this paper makes a review about the relationship between e-learning and knowledge management and advanced technologies and corresponding products that support the design and operation of e-learning system. At the end of this paper, we analyze the main trends of the development direction of e-learning technology.

Participatory methods for initiating manufacturing employees' involvement in product innovation

DEFF Research Database (Denmark)

Jensen, Anna Rose Vagn; Jensen, Christian Schou; Broberg, Ole

2016-01-01

approach that we apply to two case companies, this paper presents an empirical study of how to initiate involvement of manufacturing employees in R&D activities. We have used participatory methods from design thinking that has the ability to create relations between employees from different backgrounds......Employee-driven innovation has the potential to improve product innovation by involving employees as innovative resources. However, it can be a challenge to turn the potential into a reality of collaboration practices across organizational structures and culture. Through an interactive research...... and through a series of facilitated workshops we have investigated how these methods can initiate employee involvement. We see that participatory methods can improve understanding and relation between R&D and manufacturing departments, and thereby support a creative collaboration and emergence of employee...

Supporting the production of quality livestock vaccines for ...

International Development Research Centre (IDRC) Digital Library (Canada)

The project will support technology transfer and establishment of product formulation and quality systems that will enable the Kenyan Institute to produce and register three new vaccines of international quality standards. This project will also pilot a model for bulk antigen processing for other vaccine types in Africa that can ...

In search of standards to support circularity in product policies: A systematic approach.

Science.gov (United States)

Tecchio, Paolo; McAlister, Catriona; Mathieux, Fabrice; Ardente, Fulvio

2017-12-01

The aspiration of a circular economy is to shift material flows toward a zero waste and pollution production system. The process of shifting to a circular economy has been initiated by the European Commission in their action plan for the circular economy. The EU Ecodesign Directive is a key policy in this transition. However, to date the focus of access to market requirements on products has primarily been upon energy efficiency. The absence of adequate metrics and standards has been a key barrier to the inclusion of resource efficiency requirements. This paper proposes a framework to boost sustainable engineering and resource use by systematically identifying standardization needs and features. Standards can then support the setting of appropriate material efficiency requirements in EU product policy. Three high-level policy goals concerning material efficiency of products were identified: embodied impact reduction, lifetime extension and residual waste reduction. Through a lifecycle perspective, a matrix of interactions among material efficiency topics (recycled content, re-used content, relevant material content, durability, upgradability, reparability, re-manufacturability, reusability, recyclability, recoverability, relevant material separability) and policy goals was created. The framework was tested on case studies for electronic displays and washing machines. For potential material efficiency requirements, specific standardization needs were identified, such as adequate metrics for performance measurements, reliable and repeatable tests, and calculation procedures. The proposed novel framework aims to provide a method by which to identify key material efficiency considerations within the policy context, and to map out the generic and product-specific standardisation needs to support ecodesign. Via such an approach, many different stakeholders (industry, academics, policy makers, non-governmental organizations etc.) can be involved in material efficiency

AN EXPERT SYSTEM FOR SUPPORTING THE PRODUCTION OF PLEASURE BOATS

Directory of Open Access Journals (Sweden)

Tomasz GONCIARZ

2013-07-01

Full Text Available Expert systems can be defined as computer programs, whose main task is to simulate a human expert, usually in a narrow field of expertise. Possible applications of modern information technology are very extensive, ranging from medicine, geology and technology to applications in the field of economic and financial decision support. The purpose of this paper is to present the practical application of an expert system that supports the process of managing the production of yachts and has a high suitability for use in this application. Using the expert system described in the paper reduces the time during the design and production preparation process.

A method for making a glass supported system, such glass supported system, and the use of a glass support therefor

NARCIS (Netherlands)

Unnikrishnan, S.; Jansen, Henricus V.; Berenschot, Johan W.; Fazal, I.; Louwerse, M.C.; Mogulkoc, B.; Sanders, Remco G.P.; de Boer, Meint J.; Elwenspoek, Michael Curt

2008-01-01

The invention relates to a method for making a glass supported micro or nano system, comprising the steps of: i) providing a glass support; ii) mounting at least one system on at least one glass support; and iii) bonding the system to the glass support, such that the system is circumferentially

Supporting Product Line Evolution with Framed Aspects

DEFF Research Database (Denmark)

Loughran, Neil; Rashid, Awais; Zhang, Weishan

2004-01-01

, but there will eventually come a time when a certain feature or scenario appears which could not have been foreseen in the early stages of development. We argue that frames and aspects when used in isolation cannot overcome these weaknesses effectively. However, they can be addressed by using the respective strengths......This paper discusses how evolution in software product lines can be supported using framed aspects: a combination of aspect-oriented programming and frame technology. Product line architectures and assets are subject to maintenance and evolution throughout their lifetime due to the emergence of new...... of both technologies in combination. The amalgamation of framing and aspect-oriented techniques can help in the integration of new features and thus reduce the risk of architectural erosion....

NASA/SPoRt: GOES-R Activities in Support of Product Development, Management, and Training

Science.gov (United States)

Fuell, Kevin; Jedlovec, Gary; Molthan, Andrew; Stano, Geoffrey

2012-01-01

SPoRT is using current capabilities of MODIS and VIIRS, combined with current GOES (i.e. Hybrid Imagery) to demonstrate mesoscale capabilities of future ABI instrument. SPoRT is transitioning RGBs from EUMETSAT standard "recipes" to demonstrate a method to more efficiently handle the increase channels/frequency of ABI. Challenges for RGB production exist. Internal vs. external production, Bit depth needed, Adding quantitative information, etc. SPoRT forming group to address these issues. SPoRT is leading efforts on the application of total lightning in operations and to educate users of this new capability. Training in many forms is used to support testbed activities and is a key part to the transition process.

Characterization of titanium dioxide nanoparticles in food products: analytical methods to define nanoparticles.

Science.gov (United States)

Peters, Ruud J B; van Bemmel, Greet; Herrera-Rivera, Zahira; Helsper, Hans P F G; Marvin, Hans J P; Weigel, Stefan; Tromp, Peter C; Oomen, Agnes G; Rietveld, Anton G; Bouwmeester, Hans

2014-07-09

Titanium dioxide (TiO2) is a common food additive used to enhance the white color, brightness, and sometimes flavor of a variety of food products. In this study 7 food grade TiO2 materials (E171), 24 food products, and 3 personal care products were investigated for their TiO2 content and the number-based size distribution of TiO2 particles present in these products. Three principally different methods have been used to determine the number-based size distribution of TiO2 particles: electron microscopy, asymmetric flow field-flow fractionation combined with inductively coupled mass spectrometry, and single-particle inductively coupled mass spectrometry. The results show that all E171 materials have similar size distributions with primary particle sizes in the range of 60-300 nm. Depending on the analytical method used, 10-15% of the particles in these materials had sizes below 100 nm. In 24 of the 27 foods and personal care products detectable amounts of titanium were found ranging from 0.02 to 9.0 mg TiO2/g product. The number-based size distributions for TiO2 particles in the food and personal care products showed that 5-10% of the particles in these products had sizes below 100 nm, comparable to that found in the E171 materials. Comparable size distributions were found using the three principally different analytical methods. Although the applied methods are considered state of the art, they showed practical size limits for TiO2 particles in the range of 20-50 nm, which may introduce a significant bias in the size distribution because particles <20 nm are excluded. This shows the inability of current state of the art methods to support the European Union recommendation for the definition of nanomaterials.

Composition and methods for improved fuel production

Science.gov (United States)

Steele, Philip H.; Tanneru, Sathishkumar; Gajjela, Sanjeev K.

2015-12-29

Certain embodiments of the present invention are configured to produce boiler and transportation fuels. A first phase of the method may include oxidation and/or hyper-acidification of bio-oil to produce an intermediate product. A second phase of the method may include catalytic deoxygenation, esterification, or olefination/esterification of the intermediate product under pressurized syngas. The composition of the resulting product--e.g., a boiler fuel--produced by these methods may be used directly or further upgraded to a transportation fuel. Certain embodiments of the present invention also include catalytic compositions configured for use in the method embodiments.

Methodology supporting production control in a foundry applying modern DISAMATIC molding line

Directory of Open Access Journals (Sweden)

Sika Robert

2017-01-01

Full Text Available The paper presents methodology of production control using statistical methods in foundry conditions, using the automatic DISAMATIC molding line. The authors were inspired by many years of experience in implementing IT tools for foundries. The authors noticed that there is a lack of basic IT tools dedicated to specific casting processes, that would greatly facilitate their oversight and thus improve the quality of manufactured products. More and more systems are installed in the ERP or CAx area, but they integrate processes only partially, mainly in the area of technology design and business management from finance and control. Monitoring of foundry processes can generate a large amount of process-related data. This is particularly noticeable in automated processes. An example is the modern DISAMATIC molding line, which integrates several casting processes, such as mold preparation, assembly, pouring or shake out. The authors proposed a methodology that supports the control of the above-mentioned foundry processes using statistical methods. Such an approach can be successfully used, for example, during periodic external audits. The mentioned methodology in the innovative DISAM-ProdC computer tool was implemented.

Web-Based Implementation of E-Marketing to Support Product Marketing of Chemical Manufacturing Company

Directory of Open Access Journals (Sweden)

Riswan Efendi Tarigan

2015-10-01

Full Text Available Currently, many company’s marketing strategies are limited only to face-to-face communication, telephone, facsimile, company portfolio, and product brochures. However, those marketing strategies are well- known to have limited impacts. Therefore, the presence of e-marketing as one of the marketing strategies would be appropriate to cover the weaknesses and to solve a number of the marketing problems. The purpose of this study is to discuss matters related to marketing, such    as, proposing a marketing plan using website, expanding marketing segment, and introducing existing  products for a chemical manufacturing company. The adopted research method is a descriptive method where the study is directly performed on the research object to acquire necessary data. The collected data are further analyzed using the Porter’s Five Force and SWOT analysis. Fi- nally, the work provides a number of recommendations for implementing e-marketing strategies to support the company business.

Change Of Learning Environment Using Game Production ­Theory, Methods And Practice

DEFF Research Database (Denmark)

Reng, Lars; Kofoed, Lise; Schoenau-Fog, Henrik

2018-01-01

will focus on cases in which development of games did change the learning environments into production units where students or employees were producing games as part of the learning process. The cases indicate that the motivation as well as the learning curve became very high. The pedagogical theories......Game Based Learning has proven to have many possibilities for supporting better learning outcomes, when using educational or commercial games in the classroom. However, there is also a great potential in using game development as a motivator in other kinds of learning scenarios. This study...... and methods are based on Problem Based Learning (PBL), but are developed further by combining PBL with a production-oriented/design based approach. We illustrate the potential of using game production as a learning environment with investigation of three game productions. We can conclude that using game...

Supporting food security in the 21st century through resource-conserving increases in agricultural production

Directory of Open Access Journals (Sweden)

Uphoff Norman

2012-12-01

such as wheat, finger millet, sugarcane, mustard, and tef. Genetic potentials are the starting point for any and all agricultural production, and current efforts to improve food security and nutrition through plant breeding efforts should continue. However, future research and production strategies could beneficially seek to capitalize on biological processes and potentials existing within crops and in their supporting soil systems, rather than focusing so predominantly on making modifications in genetic factors. Scientific advances in the domains of microbiology, soil ecology and epigenetics could foreseeably assist farmers in meeting production and income goals with resource-economizing methods. It remains to be seen to what extent agroecologically-informed methods can help farmers meet expected agricultural production requirements to ensure global food security, but this direction deserves more attention and support.

Analysis of Competitiveness and Support Instruments for Heat and Electricity Production from Wood Biomass in Latvia

Science.gov (United States)

Klavs, G.; Kudrenickis, I.; Kundzina, A.

2012-01-01

Utilisation of renewable energy sources is one of the key factors in a search for efficient ways of reducing the emissions of greenhouse gases and improving the energy supply security. So far, the district heating supply in Latvia has been based on natural gas, with the wood fuel playing a minor role; the same is true for decentralised combined heat-power (CHP) production. The paper describes a method for evaluation of the economic feasibility of heat and electricity production from wood biomass under the competition between different fuel types and taking into account the electricity market. For the simulation, a cost estimation model is applied. The results demonstrate that wood biomass can successfully be utilised for competitive heat production by boiler houses, while for electricity production by CHP utilities it cannot compete on the market (even despite the low prices on wood biomass fuel) unless particular financial support instruments are applied. The authors evaluate the necessary support level and the impact of two main support instruments - the investment subsidies and the feed-in tariff - on the economic viability of wood-fuelled CHP plants, and show that the feed-in tariff could be considered as an instrument strongly affecting the competitiveness of such type CHP. Regarding the feed-in tariff determination, a compromise should be found between the economy-dictated requirement to develop CHP projects concerning capacities above 5 MWel - on the one hand, and the relatively small heat loads in many Latvian towns - on the other.

Enterprise Engineering Method supporting Six Sigma Approach

OpenAIRE

Jochem, Roland

2007-01-01

Enterprise Modeling (EM) is currently in operation either as a technique to represent and understand the structure and behavior of the enterprise, or as a technique to analyze business processes, and in many cases as support technique for business process reengineering. However, EM architectures and methodes for Enterprise Engineering can also used to support new management techniques like SIX SIGMA, because these new techniques need a clear, transparent and integrated definition and descript...

Senior management support in the new product development process

NARCIS (Netherlands)

Gomes, J.F.; Gomes, Jorge; de Weerd-Nederhof, Petronella C.; Pearson, Alan; Fisscher, O.A.M.

2001-01-01

This paper studies the relationship between senior management support to new product development activities by means of a quantitative and qualitative analysis of questionnaire and interview data collected in the United Kingdom and the Netherlands. The quantitative analysis showed that there is a

Simple automated system for simultaneous production of 11C-labeled tracers by solid supported methylation

International Nuclear Information System (INIS)

Quincoces, Gemma; Penuelas, Ivan; Valero, Marta; Serra, Patricia; Collantes, Maria; Marti-Climent, Josep; Arbizu, Javier; Jose Garcia-Velloso, Maria; Angel Richter, Jose

2006-01-01

We herein describe a simple setup for the automated simultaneous synthesis of L-[methyl- 11 C]methionine and N-[methyl- 11 C]choline by solid-supported methylation . The setup is extremely simple and easy to adapt to other automated systems and due to its versatility, the method can be utilized for the production of other radiopharmaceuticals requiring a simple [ 11 C]methylation step. Furthermore, it can be used for multiple simultaneous synthesis

Namibia - Conservancy Support and Indigenous Natural Products

Data.gov (United States)

Millennium Challenge Corporation — The eval­u­ation employs a mixed-methods approach in which qual­itative techniques and quan­ti­ta­tive ana­lysis support each other, recognizing that the techniques...

Design Analysis Method for Multidisciplinary Complex Product using SysML

Directory of Open Access Journals (Sweden)

Liu Jihong

2017-01-01

Full Text Available In the design of multidisciplinary complex products, model-based systems engineering methods are widely used. However, the methodologies only contain only modeling order and simple analysis steps, and lack integrated design analysis methods supporting the whole process. In order to solve the problem, a conceptual design analysis method with integrating modern design methods has been proposed. First, based on the requirement analysis of the quantization matrix, the user’s needs are quantitatively evaluated and translated to system requirements. Then, by the function decomposition of the function knowledge base, the total function is semi-automatically decomposed into the predefined atomic function. The function is matched into predefined structure through the behaviour layer using function-structure mapping based on the interface matching. Finally based on design structure matrix (DSM, the structure reorganization is completed. The process of analysis is implemented with SysML, and illustrated through an aircraft air conditioning system for the system validation.

Method of treating non-supporting underground formations

International Nuclear Information System (INIS)

Anderson, B.W.; Trotty, K.D.

1977-01-01

Method of treating non-supporting underground formations, through which passes a borehole, aimed at preventing the transport of sand particles from the formation into the borehole during conveyance of liquids. (orig./RW) [de

Method of public support evaluation for advanced NPP deployment

International Nuclear Information System (INIS)

Zezula, L.; Hermansky, B.

2005-01-01

Public support of nuclear power could be fully recovered only if the public would, from the very beginning of the new power source selection process, receive transparent information and was made a part of interactive dialogue. The presented method was developed with the objective to facilitate the complex process of the utilities - public interaction. Our method of the public support evaluation allows to classify designs of new nuclear power plants taking into consideration the public attitude to continued nuclear power deployment in the Czech Republic as well as the preference of a certain plant design. The method is based on the model with a set of probabilistic input metrics, which permits to compare the offered concepts with the reference one, with a high degree of objectivity. This method is a part of the more complex evaluation procedure applicable for the new designs assessment that uses the computer code ''Potencial'' developed at the NRI Rez plc. The metrics of the established public support criteria are discussed. (author)

Nondestructive methods for quality evaluation of livestock products.

Science.gov (United States)

Narsaiah, K; Jha, Shyam N

2012-06-01

The muscles derived from livestock are highly perishable. Rapid and nondestructive methods are essential for quality assurance of such products. Potential nondestructive methods, which can supplement or replace many of traditional time consuming destructive methods, include colour and computer image analysis, NIR spectroscopy, NMRI, electronic nose, ultrasound, X-ray imaging and biosensors. These methods are briefly described and the research work involving them for products derived from livestock is reviewed. These methods will be helpful in rapid screening of large number of samples, monitoring distribution networks, quick product recall and enhance traceability in the value chain of livestock products. With new developments in the areas of basic science related to these methods, colour, image processing, NIR spectroscopy, biosensors and ultrasonic analysis are expected to be widespread and cost effective for large scale meat quality evaluation in near future.

OPTIMIZATION METHODS IN TRANSPORTATION OF FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Selçuk Gümüş

2008-04-01

Full Text Available Turkey has total of 21.2 million ha (27 % forest land. In this area, average 9 million m3 of logs and 5 million stere of fuel wood have been annually produced by the government forest enterprises. The total annual production is approximately 13million m3 Considering the fact that the costs of transporting forest products was about . 160 million TL in the year of 2006, the importance of optimizing the total costs in transportation can be better understood. Today, there is not common optimization method used at whole transportation problems. However, the decision makers select the most appropriate methods according to their aims.Comprehending of features and capacity of optimization methods is important for selecting of the most appropriate method. The evaluation of optimization methods that can be used at forest products transportation is aimed in this study.

Systems and methods of storing combustion waste products

Science.gov (United States)

Chen, Shen-En; Wang, Peng; Miao, Xiexing; Feng, Qiyan; Zhu, Qianlin

2016-04-12

In one aspect, methods of storing one or more combustion waste products are described herein. Combustion waste products stored by a method described herein can include solid combustion waste products such as coal ash and/or gaseous combustion products such as carbon dioxide. In some embodiments, a method of storing carbon dioxide comprises providing a carbon dioxide storage medium comprising porous concrete having a macroporous and microporous pore structure and flowing carbon dioxide captured from a combustion flue gas source into the pore structure of the porous concrete.

Aqua AIRS Level 3 Support Daily Product (AIRS+AMSU+HSB) V006

Data.gov (United States)

National Aeronautics and Space Administration — The L3 support products are similar to the L3 standard products but contain fields which are not fully validated, or are inputs or intermediary values. Because no...

Preferences of Informal Carers on Technology Packages to Support Meal Production by People Living with Dementia, Elicited from Personalised AT and ICT Product Brochures

Directory of Open Access Journals (Sweden)

Maria Laura De Filippis

2017-01-01

Full Text Available Assistive technology (AT can help support the continued independence of people living with dementia, supported by informal carers. Opinions and preferences of informal carers towards a range of assistive and digital information and communication technologies (ICT to support food purchase and menu selection, including navigation and online shopping, and safe meal-making by individuals living with dementia were investigated. General attitudes and experiences with assistive technologies were first probed by means of a focus group with carers (n = 6, organised through the Alzheimer’s Society in Nottingham, England. A series of AT/ICT product brochures were then produced, describing packages of technologies to enable meal production. Task-specific questions were asked of carers (n = 10 at local Memory Cafés as to the perceived capabilities of each individual for shopping and meal-making. Carers were asked to make pair-wise choices in order to select a personalised brochure and to complete a questionnaire to elicit the practicality, desirability and affordability of specific products and to probe for preferences amongst key features. Opinions on ease-of-use, aesthetics, expected safety-in-use, independence of use and stigma related to the technology packages were also collected. Results showed that carers are able to make detailed choices and express preferences about assistive and digital technologies for the individuals in their care, and customise their enabler package. Most believed that having an enabler package would improve safety. Greater exposure of carers to newer digital products would be beneficial. The brochure method could be employed on consumer websites and by AT assessors.

Wet catalyst-support films for production of vertically aligned carbon nanotubes.

Science.gov (United States)

Alvarez, Noe T; Hamilton, Christopher E; Pint, Cary L; Orbaek, Alvin; Yao, Jun; Frosinini, Aldo L; Barron, Andrew R; Tour, James M; Hauge, Robert H

2010-07-01

A procedure for vertically aligned carbon nanotube (VA-CNT) production has been developed through liquid-phase deposition of alumoxanes (aluminum oxide hydroxides, boehmite) as a catalyst support. Through a simple spin-coating of alumoxane nanoparticles, uniform centimer-square thin film surfaces were coated and used as supports for subsequent deposition of metal catalyst. Uniform VA-CNTs are observed to grow from this film following deposition of both conventional evaporated Fe catalyst, as well as premade Fe nanoparticles drop-dried from the liquid phase. The quality and uniformity of the VA-CNTs are comparable to growth from conventional evaporated layers of Al(2)O(3). The combined use of alumoxane and Fe nanoparticles to coat surfaces represents an inexpensive and scalable approach to large-scale VA-CNT production that makes chemical vapor deposition significantly more competitive when compared to other CNT production techniques.

Peer production & peer support at the Free Technology Academy

NARCIS (Netherlands)

Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

2012-01-01

Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

A Configuration System for Supportive Purposes in the Middle of a Product Lifecycle

DEFF Research Database (Denmark)

Christensen, Tim Teglgaard; Hvam, Lars

2006-01-01

for supportive purposes in the middle of a product lifecycle. By doing so a product in operation (including maintenance) could be administrated more effectively. At the same time it is a good opportunity to hand over important runtime information and thereby create a basis for general improvements......This paper presents a new way of using configuration systems. Traditionally, these systems have been use for decision support for sales. The aim is now to support "Middle-Of-Lifecycle" (MOL) processes, which means that the decision support system is targeted for the customers and the manufacturer...... (field services, technical support and after sales). This is especially interesting, as manufacturing companies are increasingly focusing their operations on service operations. The background for this idea is that companies often experience a lack of information between the initial sale...

Reduction in requirements for allogeneic blood products: nonpharmacologic methods.

Science.gov (United States)

Hardy, J F; Bélisle, S; Janvier, G; Samama, M

1996-12-01

Various strategies have been proposed to decrease bleeding and allogeneic transfusion requirements during and after cardiac operations. This article attempts to document the usefulness, or lack thereof, of the nonpharmacologic methods available in clinical practice. Blood conservation methods were reviewed in chronologic order, as they become available to patients during the perisurgical period. The literature in support of or against each strategy was reexamined critically. Avoidance of preoperative anemia and adherence to published guidelines for the practice of transfusion are of paramount importance. Intraoperatively, tolerance of low hemoglobin concentrations and use of autologous blood (predonated or harvested before bypass) will reduce allogeneic transfusions. The usefulness of plateletpheresis and retransfusion of shed mediastinal fluid remains controversial. Intraoperatively and postoperatively, maintenance of normothermia contributes to improved hemostasis. Several approaches have been shown to be effective. An efficient combination of methods can reduce, and sometimes abolish, the need for allogeneic blood products after cardiac operations, inasmuch as all those involved in the care of cardiac surgical patients adhere thoughtfully to existing transfusion guidelines.

BEACON: An application of nodal methods for operational support

International Nuclear Information System (INIS)

Boyd, W.A.; Nguyen, T.Q.

1992-01-01

A practical application of nodal methods is on-line plant operational support. However, to enable plant personnel to take full advantage of a nodal model to support plant operations, (a) a core nodal model must always be up to date with the current core history and conditions, (b) the nodal methods must be fast enough to allow numerous core calculations to be performed in minutes to support engineering decisions, and (c) the system must be easily accessible to engineering personnel at the reactor, their offices, or any other location considered appropriate. A core operational support package developed by Westinghouse called BEACON (best estimate analysis of core operations - nuclear) has been installed at several plants. Results from these plants and numerous in-core flux maps analyzed have demonstrated the accuracy of the model and the effectiveness of the methodology

The method of calculation of pipelines laid on supports

OpenAIRE

Benin D.M.

2017-01-01

this article focuses on the issue of laying pipelines on supports and the method of calculation of vertical and horizontal loads acting on the support. As pipelines can be water piping systems, heat networks, oil and mazout lines, condensate lines, steam lines, etc. this article describes the calculations of supports for pipelines laid above ground, in crowded channels, premises, on racks, in impassable channels, hanging supports, etc. The paper explores recommendations for placement of the s...

Spatial support of knowledge production in higher education: Research paper

OpenAIRE

van Sprang, H; Groen, BH; van der Voordt, Theo

2013-01-01

This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

Survey of Technetium Analytical Production Methods Supporting Hanford Nuclear Materials Processing

International Nuclear Information System (INIS)

TROYER, G.L.

1999-01-01

This document provides a historical survey of analytical methods used for measuring 99 Tc in nuclear fuel reprocessing materials and wastes at Hanford. Method challenges including special sludge matrices tested are discussed. Special problems and recommendations are presented

Beyond product innovation; improving innovation policy support for SMEs in traditional industries

NARCIS (Netherlands)

Wintjes, R.J.M.; Douglas, D.; Fairburn, J.; Hollanders, H.J.G.M.; Pugh, G.

2014-01-01

Innovation support measures in the EU are mostly designed to support product innovation in R&D intensive sectors. To increase the still considerable contribution to regional employment and competitiveness from SMEs in traditional manufacturing industries a broader innovation (policy) mix is more

The development of design method of nuclear piping system supported by elasto-plastic support structures (part 2)

International Nuclear Information System (INIS)

Endo, R.; Murota, M.; Kawabata, J-I.; Hirose, J.; Nekomoto, Y.; Takayama, Y.; Kobayashi, H.

1995-01-01

The conventional seismic design method of nuclear piping system is very conservative because of the accumulation of various safety factors in the design process, and nuclear piping systems are thought to have a large safety margin. Considering this situations, research program was promoted to furthermore rationalize nuclear power plants by reducing the amount of support structures and reducing the piping's seismic response through vibration energy absorption resulting from the elasto-plastic behavior of piping support structures. The research had the following three stages. In the first stage, we selected conventional piping support structures in light-water reactors that exhibited elasto-plastic behavior, and studied the effect of displacement and the vibration frequency on the stiffness and on the energy absorption by testing these models. In the second stage, vibration tests were performed using piping models with support structures on shaking tables. The piping vibration characteristics were clarified by sinusoidal sweep tests and the piping response characteristics by seismic wave vibration tests when the support structures were in an elasto-plastic condition. In the third stage, a general method was developed to evaluate the characteristics of a variety of support structures in the tests. A simplified analysis method was also developed to evaluate the piping seismic response using the piping model test result. To expand the results mentioned above, we also established a new seismic design method of piping systems that allowed support structures to have elasto-plastic behavior. This paper reports the newly developed seismic design method based on the results of experiments conducted under the joint research program of Japanese electric power companies (The Japan Atomic Power Co., Hokkaido EPC, Tohoku EPC, Tokyo EPC, Chubu EPC, Hokuriku EPC, Kansai EPC, Chugoku EPC, Shikoku EPC, Kyushu EPC) and nuclear plant makers (Hitachi Ltd., Toshiba Co., MHI Ltd., HEC Ltd

Method of burning petrochemical products

Energy Technology Data Exchange (ETDEWEB)

Sado, I

1973-01-12

This invention concerns a method of burning wastes such as polyvinyl chloride or other synthetic resin products and rubbers, in which wastes are burned in a nearly smokeless and odorless state. The method is characterized by a process by which petrochemical waste products are subjected to a spontaneous combustion in a casserole state in a closed combustion room in such a way that no air is supplied whatever, and subsequently the gas so generated is sent successively in an adequate amount into a separately installed second combustion room where it is reburnt at a high temperature of more than 1000 C by a jet flame from the oil burners mounted inside the combustion room. Usually, petrochemical products emanate black smoke of Ringelmann concentration of more than five and a strong odor, but in this method, particularly in the case of polyvinyl chloride the exhaust smoke has a Ringelmann smoke concentration of less than one and is almost odorless because the plastic is completely gasified by the spontaneous combustion and completely burned at 1300 to 1400/sup 0/C with oil and air in the second combustion room. When the exhaust smoke is passed through a neutralization tank to remove the chloride compounds in the smoke, the damaging contribution of the exhaust gas or smoke to the secondary pollution can be completely eliminated.

PULP OBTAINING METHOD FOR PACKAGE PRODUCTION

Directory of Open Access Journals (Sweden)

V. V. Kuzmich

2015-01-01

Full Text Available The paper presents a new method for obtaining pulp which is used for production of cardboard, paper and package while using carbon dioxide and hydrazine hydrate and neutral-sulfite  shive cooking. Output increase of  the desired product can be explained by reduction in destruction of plant raw material carbohydrates during its cooking process. Quality improvement of the desired product (improvement in bleaching and output is attributed to the fact that usage of carbon dioxide and hydrazine contributes to provision of polysaccharide chain resistance to destruction due to the presence of  end links having structure of metasaccharinic and aldonic acids.The author has developed a new method for pulp obtaining on the basis of the executed investigations  and literature data.  СО2 and hydrazine hydrate have been used for obtaining pulp. Method invention concerns pulp obtaining and it can be used for paper and cardboard package manufacturing in pulp and paper industry.The method is to be carried in the following way: pulp-containing plant raw material is loaded into an autoclave and then aqua solution of sodium monosulfite containing hydrazine hydrate that constitutes 4–5 % of absolute dry pulp-containing raw material mass with liquid module 1:6–1:8 is supplied into the autoclave. The autoclave is closed for operation under pressure and the solution is carbonated under pressure which constitutes 5–8 % of absolute dry plant raw material (shover. Temperature is subsequently raised up to 180 °С in the space of 2 hours and cooking is carried out in the course of 4 hours. Usage of  the proposed method for shover cooking makes it possible to reduce monosulfite cooking process and improve qualitative characteristics and output of the desired product.  In addition to above mentioned fact there is a possibility to improve bleaching and final product output. 

Renewable electricity production costs-A framework to assist policy-makers' decisions on price support

International Nuclear Information System (INIS)

Dinica, Valentina

2011-01-01

Despite recent progress, the production costs for renewable electricity remain above those for conventional power. Expectations of continuous reductions in production costs, typically underpin governments' policies for financial support. They often draw on the technology-focused versions of the Experience Curve model. This paper discusses how national-contextual factors also have a strong influence on production costs, such as geographic, infrastructural, institutional, and resource factors. As technologies mature, and as they reach significant levels of diffusion nationally, sustained increases in production costs might be recorded, due to these nationally contextual factors, poorly accounted for in policy-making decisions for price support. The paper suggests an analytical framework for a more comprehensive understanding of production costs. Based on this, it recommends that the evolution of specific cost levels and factors be monitored to locate 'sources of changes'. The paper also suggests policy instruments that governments may use to facilitate cost decreases, whenever possible. The application of the framework is illustrated for the diffusion of wind power in Spain during the past three decades. - Highlights: → Models, frameworks for policy-making on price support for renewable electricity production costs. → Policy instruments to help reduce production costs. → Limits to the influence of policies of production costs reductions.

[Combine fats products: methodic opportunities of it identification].

Science.gov (United States)

Viktorova, E V; Kulakova, S N; Mikhaĭlov, N A

2006-01-01

At present time very topical problem is falsification of milk fat. The number of methods was considered to detection of milk fat authention and possibilities his difference from combined fat products. The analysis of modern approaches to valuation of milk fat authention has showed that the main method for detection of fat nature is gas chromatography analysis. The computer method of express identification of fat products is proposed for quick getting of information about accessory of examine fat to nature milk or combined fat product.

Hippocampal declarative memory supports gesture production: Evidence from amnesia.

Science.gov (United States)

Hilverman, Caitlin; Cook, Susan Wagner; Duff, Melissa C

2016-12-01

Spontaneous co-speech hand gestures provide a visuospatial representation of what is being communicated in spoken language. Although it is clear that gestures emerge from representations in memory for what is being communicated (De Ruiter, 1998; Wesp, Hesse, Keutmann, & Wheaton, 2001), the mechanism supporting the relationship between gesture and memory is unknown. Current theories of gesture production posit that action - supported by motor areas of the brain - is key in determining whether gestures are produced. We propose that when and how gestures are produced is determined in part by hippocampally-mediated declarative memory. We examined the speech and gesture of healthy older adults and of memory-impaired patients with hippocampal amnesia during four discourse tasks that required accessing episodes and information from the remote past. Consistent with previous reports of impoverished spoken language in patients with hippocampal amnesia, we predicted that these patients, who have difficulty generating multifaceted declarative memory representations, may in turn have impoverished gesture production. We found that patients gestured less overall relative to healthy comparison participants, and that this was particularly evident in tasks that may rely more heavily on declarative memory. Thus, gestures do not just emerge from the motor representation activated for speaking, but are also sensitive to the representation available in hippocampal declarative memory, suggesting a direct link between memory and gesture production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

Science.gov (United States)

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

IT support of commercial-production companies

International Nuclear Information System (INIS)

Hroch, A.

2004-01-01

Slovak electricity sector was built from sixties like common entity what can use synergic effects. In the 2002 reorganisation was done, there were created independent joint stock company. There were published new legislative acts, which opened Slovak electricity market for competition. The companies have to change their mine because a business is priority No. 1. Slovenske elektrarne, joint-stock company is under transformation process to build procedural guided trade-production company. As joint project is prepared a new system to control business in to a trading floor, including a risk management, which have to be supported by technological and information tools together with planing, scheduling, directing and controlling of the operation. The all system includes standard modules that fulfil their specific functions. (author)

Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

OpenAIRE

Klāvs G.; Kundziņa A.; Kudrenickis I.

2016-01-01

Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS) and the feed-in tariff (FIT) – on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas ut...

Library orientation on videotape: production planning and administrative support.

Science.gov (United States)

Shedlock, J; Tawyea, E W

1989-01-01

New student-faculty-staff orientation is an important public service in a medical library and demands creativity, imagination, teaching skill, coordination, and cooperation on the part of public services staff. The Northwestern University Medical Library (NUML) implemented a video production service in the spring of 1986 and used the new service to produce an orientation videotape for incoming students, new faculty, and medical center staff. Planning is an important function in video production, and the various phases of outlining topics, drafting scripts, matching video sequences, and actual taping of video, voice, and music are described. The NUML orientation videotape demonstrates how reference and audiovisual services merge talent and skills to benefit the library user. Videotape production, however, cannot happen in a vacuum of good intentions and high ideals. This paper also presents the management support and cost analysis needed to make video production services a reality for use by public service departments.

A review of methods supporting supplier selection

NARCIS (Netherlands)

de Boer, L.; Labro, Eva; Morlacchi, Pierangela

2001-01-01

this paper we present a review of decision methods reported in the literature for supporting the supplier selection process. The review is based on an extensive search in the academic literature. We position the contributions in a framework that takes the diversity of procurement situations in terms

Supporting product-servicing networks

NARCIS (Netherlands)

Camarihna-Matos, L.M.; Ferrada, F.; Oliveira, A.I.; Afsarmanesh, H.; Aboutajdine, D.; Skalli, A.; Benchekroun, B.; Artiba, A.

2013-01-01

Service-based enhancement of products represents a growing trend, particularly in the context of complex products. A service-enhanced product can be seen as a market proposition that extends the traditional functionality of a product by incorporating additional business services, which not only

State of technology, system and solution supporting on-line maintenance - company's activities and products

International Nuclear Information System (INIS)

Nishitani, Junichi; Shimizu, Shunichi; Higasa, Hisakazu

2010-01-01

The new inspection system based on operator's maintenance and monitoring program of nuclear power plants was introduced in Japan more than one year ago and recommended on-line maintenance (maintenance during operation) will be carried out to increase capacity factor with safe and reliable operation of the plant. In this feature article, nine experts described the state of technology, system and solution supporting on-line maintenance - company's activities and products. These were titled as 'MHI's technology supporting on-line maintenance'. 'Technology supporting on-line maintenance - Toshiba's activities to upgrade monitoring and diagnostic service and maintenance management', 'AsahiKASEI's activities of on-line maintenance', 'Importance of information sharing of on-line maintenance and its ideal method-function of impact plan of IBM Maximo Asset Management for Nuclear', 'US's on-line maintenance and information systems', 'SmartProcedures realizing safe operation of nuclear power plant - proposal of computerized procedures', 'Ultrasonic leak detection system SDT170', 'Application of infrared thermography for equipment maintenance in nuclear power plant' and 'On-line condition monitoring system - condition eye'. (T. Tanaka)

Using non-parametric methods in econometric production analysis

DEFF Research Database (Denmark)

Czekaj, Tomasz Gerard; Henningsen, Arne

Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify the functional form of the production function. Most often, the Cobb...... results—including measures that are of interest of applied economists, such as elasticities. Therefore, we propose to use nonparametric econometric methods. First, they can be applied to verify the functional form used in parametric estimations of production functions. Second, they can be directly used...

Advanced codes and methods supporting improved fuel cycle economics - 5493

International Nuclear Information System (INIS)

Curca-Tivig, F.; Maupin, K.; Thareau, S.

2015-01-01

AREVA's code development program was practically completed in 2014. The basic codes supporting a new generation of advanced methods are the followings. GALILEO is a state-of-the-art fuel rod performance code for PWR and BWR applications. Development is completed, implementation started in France and the U.S.A. ARCADIA-1 is a state-of-the-art neutronics/ thermal-hydraulics/ thermal-mechanics code system for PWR applications. Development is completed, implementation started in Europe and in the U.S.A. The system thermal-hydraulic codes S-RELAP5 and CATHARE-2 are not really new but still state-of-the-art in the domain. S-RELAP5 was completely restructured and re-coded such that its life cycle increases by further decades. CATHARE-2 will be replaced in the future by the new CATHARE-3. The new AREVA codes and methods are largely based on first principles modeling with an extremely broad international verification and validation data base. This enables AREVA and its customers to access more predictable licensing processes in a fast evolving regulatory environment (new safety criteria, requests for enlarged qualification databases, statistical applications, uncertainty propagation...). In this context, the advanced codes and methods and the associated verification and validation represent the key to avoiding penalties on products, on operational limits, or on methodologies themselves

The method of calculation of pipelines laid on supports

Directory of Open Access Journals (Sweden)

Benin D.M.

2017-08-01

Full Text Available this article focuses on the issue of laying pipelines on supports and the method of calculation of vertical and horizontal loads acting on the support. As pipelines can be water piping systems, heat networks, oil and mazout lines, condensate lines, steam lines, etc. this article describes the calculations of supports for pipelines laid above ground, in crowded channels, premises, on racks, in impassable channels, hanging supports, etc. The paper explores recommendations for placement of the supports on the route of the pipelines, calculation of loads on rotating and stationary supports of pipelines; inspection of stresses in the metal pipe, resulting from elongation of the piping from the temperature from the thermal expansion of the metal during operation.

Some non-thermal microbial inactivation methods in dairy products

International Nuclear Information System (INIS)

Yangilar, F.; Kabil, E.

2013-01-01

During the production of dairy products, some thermal processes such as pasteurization and sterilization are used commonly to inactive microorganisms. But as a result of thermal processes, loss of nutrient and aroma, non-enzymatic browning and organoleptic differentiation especially in dairy products are seen. Because of this, alternative methods are needed to provide microbial inactivation and as major problems are caused by high temperatures, non-thermal processes are focused on. For this purpose, some methods such as high pressure (HP), pulsed light (PL), ultraviolet radiation (UV), supercritical carbon dioxide (SC-CO2) or pulsed electric field (PEF) are used in food. These methods products are processed in ambient temperature and so not only mentioned losses are minimized but also freshness and naturality of products can be preserved. In this work, we will try to be given information about methods of non-thermal microbial inactivation of dairy products. (author) [tr

Industrial production of insulators using isostatic compaction method

Energy Technology Data Exchange (ETDEWEB)

Drugoveiko, O.P.; Ermolaeva, L.V.; Koren' , M.G.; Kreimer, B.D.; Panichev, G.I.; Ponomarev, A.P.; Rutkovskii, V.N.

1985-07-01

The process of shaping ceramic products from powders using isostatic compaction method is finding increasing industrial application. The production of electrical-engineering porcelain using isostatic compaction method is, according to the authors, a promising direction since this method permits one to obtain large and complex shaped products having uniform density distribution. The authors introduce an automatic isostatic compaction line at the ''Proletarii'' Factory for the production of the IOS-110-20000UKhL, T1 type insulators having the described dimensions. According to the technological process developed at the ''Elektrokeramika'' Production Complex, insulators were manufactured on the isostatic compaction line from the G-33 mass. Presspowder having a moisture content of 0.3-0.6% and a particle size of 90-160 micrometers was obtained in a spray dryer using disk spraying. The authors studied saturability by moisture of the powder obtained.

Mining Method

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Shik; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

1996-12-01

The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies to improve mining system have been carried out. To find fields requiring improvements most, the technologies using in Tae Bak Colliery which was selected one of long running mines were investigated and analyzed. The mining method appeared the field needing improvements most to reduce the production cost. The present method, so-called inseam roadway caving method presently is using to extract the steep and thick seam. However, this method has several drawbacks. To solve the problems, two mining methods are suggested for a long term and short term method respectively. Inseam roadway caving method with long-hole blasting method is a variety of the present inseam roadway caving method modified by replacing timber sets with steel arch sets and the shovel loaders with chain conveyors. And long hole blasting is introduced to promote caving. And pillar caving method with chock supports method uses chock supports setting in the cross-cut from the hanging wall to the footwall. Two single chain conveyors are needed. One is installed in front of chock supports to clear coal from the cutting face. The other is installed behind the supports to transport caved coal from behind. This method is superior to the previous one in terms of safety from water-inrushes, production rate and productivity. The only drawback is that it needs more investment. (author). 14 tabs., 34 figs.

Method for forming thermally stable nanoparticles on supports

Science.gov (United States)

Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

2013-08-20

An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

The development of the design method of nuclear piping system supported by elasto-plastic support structures (Part 1)

International Nuclear Information System (INIS)

Endo, R.; Murota, M.; Kawahata, J.-I.; Sato, T.; Mekomoto, Y.; Takayama, Y.; Kobayashi, H.; Hirose, J.

1993-01-01

The conventional aseismic design method of nuclear piping system is very conservative because of the accumulation of various safety factors in the design process, and nuclear piping systems are thought to have a large safety margin. Considering this situation, we promoted research to further rationalize nuclear power plants by reducing the amount of support structures and reducing the piping seismic response through vibration energy absorption resulting from the elasto-plastic behavior of piping support structures. The research has the following three stages. In the first stage, we select conventional piping support structures in Japanese light-water reactors that exhibit elasto-plastic behavior, and study the displacement dependency and the vibration frequency dependency on the stiffness and the energy absorption by testing their model. In the second stage, we make a piping test model with support structures whose characteristics have already been obtained, and perform vibration tests on a shaking table. In this way, we analyze the piping vibration characteristics by sinusoidal wave sweep tests and the piping response characteristics by seismic wave vibration tests, when the support structures are in an elasto-plastic condition. In the third stage, a general method is developed to evaluate the characteristics of the support structures obtained in the tests and it is applied to the evaluation of the characteristics of general support structures. A simplified analysis method is developed to evaluate the piping seismic response using the piping model test result. To expand the results mentioned above, we are developing a seismic design method of piping systems that allows support structures to have elasto-plastic behaviour. This paper reports the results of experiments conducted under the joint research program of Japanese electric power companies with support elements in the first stage and those with piping models in the second stage

Biodiesel production methods of rubber seed oil: a review

Science.gov (United States)

Ulfah, M.; Mulyazmi; Burmawi; Praputri, E.; Sundari, E.; Firdaus

2018-03-01

The utilization of rubber seed as raw material of biodiesel production is seen highly potential in Indonesia. The availability of rubber seeds in Indonesia is estimated about 5 million tons per annum, which can yield rubber seed oil about 2 million tons per year. Due to the demand of edible oils as a food source is tremendous and the edible oil feedstock costs are far expensive to be used as fuel, production of biodiesel from non-edible oils such as rubber seed is an effective way to overcome all the associated problems with edible oils. Various methods for producing biodiesel from rubber seed oil have been reported. This paper introduces an optimum condition of biodiesel production methods from rubber seed oil. This article was written to be a reference in the selection of methods and the further development of biodiesel production from rubber seed oil. Biodiesel production methods for rubber seed oils has been developed by means of homogeneous catalysts, heterogeneous catalysts, supercritical method, ultrasound, in-situ and enzymatic processes. Production of biodiesel from rubber seed oil using clinker loaded sodium methoxide as catalyst is very interesting to be studied and developed further.

Development of a smart city planning support tool using the cooperative method

Directory of Open Access Journals (Sweden)

Takeshi Kobayashi

2015-12-01

Full Text Available A reduction of environmental burdens is currently required. In particular, proposing a new approach for the construction of a smart city using renewable energy is important. The technological development of a smart city is founded building equipment and infrastructure. However, planning methods and their techniques using the collaboration approach with residents are only just developing. This study aimed to develop a support tool for the construction of a smart city using renewable energy while facilitating consensus-building efforts among residents using the method for a cooperative housing development. We organized the supporting methods for the construction of residential area using the cooperative method. Then, we developed supporting tools that interface the computer with these methods. We examined the support techniques for the construction of a residential area using renewable energy technology by analyzing Japanese cases of a smart city. Moreover, we developed a support tool for the construction of a smart city on a trial basis. We integrated the smart city construction tools and the cooperative housing construction support tool. This tool has a 3D modeling system that helps residents to easily understand the space image as a result of the examination. We also developed a professional supporting tool that residents can consider for cost-effectiveness in renewable energy and its environmental load reduction rate for the planning of a smart city.

A simple method for microtuber production in dioscorea opposita using single nodal segments

International Nuclear Information System (INIS)

Li, M.; Wang, Y; Liu, W.; Li, S.

2015-01-01

Dioscorea opposita Thunb. (Chinese yam) is an important tuber crop in East Asia because of its dual benefits edible and medicinal properties. Microtubers may provide a feasible alternative to in-vitro-grown plantlets as a means of micropropagation and a way to exchange healthy planting material. In this study, we have developed a simplified culture method for In vitro production of microtubers from D. opposita cv. Tiegun. In this method, microtubers formed in 98% of the internodes of single nodal segments after four weeks of dark-incubation when cultured in MS medium supplemented with 60 g sucrose 1-1 with shaking. Anatomical observations strongly supported the process of tuberization. We also found that 66% of the microtubers produced In vitro sprouted two months after transfer to vermiculite. The protocol presented here provides a simple model for studying the physiological, biochemical, and molecular mechanisms of tuberization in D. opposita, and shows good potential for large-scale production of microtubers as well. (author)

Method of storing solidification products

International Nuclear Information System (INIS)

Tani, Yutaro.

1985-01-01

Purpose: To enable to efficiently and satisfactorily cool and store solidification products of liquid wastes generated from the reactor spent fuel reprocessing process by a simple facility. Method: Liquid wastes generated from the reactor spent fuel reprocessing process are caused to flow from the upper opening to the inside of a spherical canistor. The opening of the spherical canistor is welded with a lid by a remote control and the liquid wastes are tightly sealed within the spherical canistor as glass solidification products. Spherical canistors having the solidification products tightly sealed therein are sent into and stored in a hopper by the remote control. Further, a blower is driven upon storing to suck cooling air from the cooling air intake port to the inside of the hopper to absorb the decay heat of radioactive materials in the solidification products and the air is discharged from the duct and through the stack to the atmosphere. (Kawakami, Y.)

Comparative Analysis of Hydrogen Production Methods with Nuclear Reactors

International Nuclear Information System (INIS)

Morozov, Andrey

2008-01-01

Hydrogen is highly effective and ecologically clean fuel. It can be produced by a variety of methods. Presently the most common are through electrolysis of water and through the steam reforming of natural gas. It is evident that the leading method for the future production of hydrogen is nuclear energy. Several types of reactors are being considered for hydrogen production, and several methods exist to produce hydrogen, including thermochemical cycles and high-temperature electrolysis. In the article the comparative analysis of various hydrogen production methods is submitted. It is considered the possibility of hydrogen production with the nuclear reactors and is proposed implementation of research program in this field at the IPPE sodium-potassium eutectic cooling high temperature experimental facility (VTS rig). (authors)

Formal Method of Description Supporting Portfolio Assessment

Science.gov (United States)

Morimoto, Yasuhiko; Ueno, Maomi; Kikukawa, Isao; Yokoyama, Setsuo; Miyadera, Youzou

2006-01-01

Teachers need to assess learner portfolios in the field of education. However, they need support in the process of designing and practicing what kind of portfolios are to be assessed. To solve the problem, a formal method of describing the relations between the lesson forms and portfolios that need to be collected and the relations between…

Chemical methods for peptide and protein production.

Science.gov (United States)

Chandrudu, Saranya; Simerska, Pavla; Toth, Istvan

2013-04-12

Since the invention of solid phase synthetic methods by Merrifield in 1963, the number of research groups focusing on peptide synthesis has grown exponentially. However, the original step-by-step synthesis had limitations: the purity of the final product decreased with the number of coupling steps. After the development of Boc and Fmoc protecting groups, novel amino acid protecting groups and new techniques were introduced to provide high quality and quantity peptide products. Fragment condensation was a popular method for peptide production in the 1980s, but unfortunately the rate of racemization and reaction difficulties proved less than ideal. Kent and co-workers revolutionized peptide coupling by introducing the chemoselective reaction of unprotected peptides, called native chemical ligation. Subsequently, research has focused on the development of novel ligating techniques including the famous click reaction, ligation of peptide hydrazides, and the recently reported α-ketoacid-hydroxylamine ligations with 5-oxaproline. Several companies have been formed all over the world to prepare high quality Good Manufacturing Practice peptide products on a multi-kilogram scale. This review describes the advances in peptide chemistry including the variety of synthetic peptide methods currently available and the broad application of peptides in medicinal chemistry.

Managing Variety in Configure-to-Order Products - An Operational Method

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

is to develop an operational method to analyze profitability of Configure-To-Order (CTO) products. The operational method consists of a four-step: analysis of product assortment, profitability analysis on configured products, market and competitor analysis and, product assortment scenarios analysis....... The proposed operational method is firstly developed based on both available literature and practitioners experience and subsequently tested on a company that produces CTO products. The results from this application are further discussed and opportunities for further research identified....

Defined media and inert supports : their potential as solid-state fermentation production systems

NARCIS (Netherlands)

Ooijkaas, L.P.; Weber, F.J.; Buitelaar, R.M.; Tramper, J.; Rinzema, A.

2000-01-01

Solid-state fermentation (SSF) using inert supports impregnated with chemically defined liquid media has several potential applications in both scientific studies and in the industrial production of high-value products, such as metabolites, biological control agents and enzymes. As a result of its

Digital Tools to Support Knowledge Sharing and Cooperation in High-Investment Product-Services

NARCIS (Netherlands)

Aromaa, S.; Leino, S.P.; Reyes-Lecuona, A.; Frangakis, N.; Berglund, J.; Bosch, T.; Rhijn, G. van; Granholm, G.

2018-01-01

The manufacturing industry needs to adapt their product-services to meet customer requirements in today’s rapidly changing markets. This paper presents how technologies can support knowledge sharing and collaboration during product-service processes. This work was part of the European Union

Announcement of the new version of guidelines for supporting the accelerated market introduction of energy-saving technologies and products. May 22, 1979

Energy Technology Data Exchange (ETDEWEB)

1979-05-01

For an accelerated market introduction of newly- or further-developed products and methods for rational energy application (projects), companies located in the Fed. Rep. of Germany can be granted funds from the Federal Government according to these guidelines and the household means available; introduction into the market without public help is not possible at all, or only with considerable delay, because of high financial risks. The financial support can be granted to those only who undertake the accelerated introduction of products and methods for rational energy application. Projects started before application cannot be promoted. As far as in a project the pre-conditions set by these guidelines and the guidelines for the Federal Programme for 'Promotion of technological innovations and the development necessary for this' are fulfilled, support takes precedence over other points due to these guidelines, if the project is planned for energy saving only.

Is There Evidence to Support Brand to Generic Interchange of the Mycophenolic Acid Products?

Science.gov (United States)

Phillips, Karen; Reddy, Prabashni; Gabardi, Steven

2017-02-01

The uptake of generic immunosuppressants lags comparatively to other drug classes, despite that the Food and Drug Administration (FDA) uses identical bioequivalence standards for all drugs. Transplant societies acknowledge the cost savings associated with generic immunosuppressants and support their use following heart, lung, kidney, or bone marrow transplantation. Seven studies of the pharmacokinetics or clinical efficacy of generic mycophenolate mofetil compared to the innovator product are published; all studies and products were ex-United States. Three studies did not demonstrate any pharmacokinetic differences between generic and innovator products in healthy subjects, achieving FDA bioequivalence requirements. Two studies in renal allograft recipients demonstrated no difference in area under the curves between generic and innovator products, and in one, the maximum concentration (Cmax) fell outside the FDA regulatory range. Two studies revealed no difference in acute organ rejection or graft function in renal allograft recipients. Patient surveys indicate that cost is a barrier to immunosuppressant adherence. Generics present a viable method to reduce costs to payers, patients, and health care systems. Adherence to immunosuppressants is crucial to prevent graft failure. An affordable regimen potentially confers greater adherence. Concerns regarding the presumed inferiority of generic immunosuppressants should be assuaged by regulatory requirements for bioequivalency testing, transplant society position statements, and pharmacokinetic and clinical studies.

CDDIS: NASA's Archive of Space Geodesy Data and Products Supporting GGOS

Science.gov (United States)

Noll, Carey; Michael, Patrick

2016-01-01

The Crustal Dynamics Data Information System (CDDIS) supports data archiving and distribution activities for the space geodesy and geodynamics community. The main objectives of the system are to store space geodesy and geodynamics related data and products in a central archive, to maintain information about the archival of these data,to disseminate these data and information in a timely manner to a global scientific research community, and provide user based tools for the exploration and use of the archive. The CDDIS data system and its archive is a key component in several of the geometric services within the International Association of Geodesy (IAG) and its observing systemthe Global Geodetic Observing System (GGOS), including the IGS, the International DORIS Service (IDS), the International Laser Ranging Service (ILRS), the International VLBI Service for Geodesy and Astrometry (IVS), and the International Earth Rotation and Reference Systems Service (IERS). The CDDIS provides on-line access to over 17 Tbytes of dataand derived products in support of the IAG services and GGOS. The systems archive continues to grow and improve as new activities are supported and enhancements are implemented. Recently, the CDDIS has established a real-time streaming capability for GNSS data and products. Furthermore, enhancements to metadata describing the contents ofthe archive have been developed to facilitate data discovery. This poster will provide a review of the improvements in the system infrastructure that CDDIS has made over the past year for the geodetic community and describe future plans for the system.

Importance of Decision Support Systems About Food Safety in Raw Milk Production

Directory of Open Access Journals (Sweden)

Ecem Akan

2015-12-01

Full Text Available In raw milk production decision support systems for control of food safety hazards has not been developed but main points of this system are available. The decision support systems’ elements include data identification at critical points in the milk supply chain, an information management system and data exchange. Decision supports systems has been developed on the basis of these elements. In dairy sector decision support systems are significant for controlling of food safety hazards and preferred by producers. When these systems are implemented in the milk supply chain, it can be prevented unnecessary sampling and analysis. In this article it will be underlined effects of decision support system elements on food safety of raw milk.

Waste processing to support 99Mo production at Sandia National Laboratories

International Nuclear Information System (INIS)

Longley, S.; Carson, S.; McDonald, M.

1997-01-01

As part of the isotope production program at Sandia National Laboratories (SNL), procedures are being finalized for the production of 99 Mo from the irradiation of 235 U-coated stainless-steel targets at the Technical Area (TA) V reactor and hot-cell facilities. Methods have been identified and tested for the management of the nonproduct (waste) material as the final step in the production process. These methods were developed utilizing the waste material from a series of cold and hot tests, beginning with depleted uranium powder and culminating with a test involving an irradiated 235 U target with an initial fission product inventory of ∼18000 Ci at the end of the irradiation cycle. This paper describes the radioactive waste management from the isotope production

Should Corrupt Countries receive Budget Support?

OpenAIRE

Kolstad, Ivar

2005-01-01

Corruption makes budget support ineffective, and sometimes counter-productive. Budget support is particularly unsuitable in partner countries where political corruption is rampant. As donors increase budget support, it is a paradox that corruption is not more of an issue in evaluations and public financial management assessment methods.

The Effect of Multimedia Writing Support Software on Written Productivity

Science.gov (United States)

Racicot, Rose

2016-01-01

The purpose of this study was to explore the effects of multimedia writing support software on the quality and quantity of writing productivity and self-perception for students who have mild to moderate developmental delays. Participants in this study included 22 special education students in grades kindergarten through 6. Methodology included a…

Methods and materials for production of terpenoids

DEFF Research Database (Denmark)

2015-01-01

The invention provide novel methods for production of terpenoids. The methods take advantage of combinations of enzymes, which are not present in nature. Thus the methods involves use of host organisms expressing a diTPS of class II, diTPS of class I, and one or more CYPs....

Analyzing and modeling interdisciplinary product development a framework for the analysis of knowledge characteristics and design support

CERN Document Server

Neumann, Frank

2015-01-01

Frank Neumann focuses on establishing a theoretical basis that allows a description of the interplay between individual and collective processes in product development. For this purpose, he introduces the integrated descriptive model of knowledge creation as the first constituent of his research framework. As a second part of the research framework, an analysis and modeling method is proposed that captures the various knowledge conversion activities described by the integrated descriptive model of knowledge creation. Subsequently, this research framework is applied to the analysis of knowledge characteristics of mechatronic product development (MPD). Finally, the results gained from the previous steps are used within a design support system that aims at federating the information and knowledge resources contained in the models published in the various development activities of MPD. Contents Descriptive Model of Knowledge Creation in Interdisciplinary Product Development Research Framework for the Analysis of ...

Eco label and integrated product policies. Supporting companies by networking

International Nuclear Information System (INIS)

Frey, M.; Iraldo, F.

1999-01-01

In 1998 IEFE Bocconi University (Italy) carried out a project for the diffusion of the European Commission Eco label, the certification of the environmental quality of products. What clearly emerges from this experience is that some Italian SMEs, among the most innovative and market-oriented, are prone and ready to grasp the opportunities connected with the Eco label adoption. The more these enterprises are capable of starting up a network of socio-institutional actors eager to support them in promoting the environmental quality of their products, the more they succeed in exploiting the above mentioned opportunities [it

Generating and testing methods for consumer-oriented product development

International Nuclear Information System (INIS)

2001-10-01

In order to obtain a good insight into various design methods that can be used by product developers to enable them to develop and test useful domotics products (domotics: intelligent systems for the home), an inventory has been made of the methods used in the Netherlands. The inventory is directed at two categories of methods: (1) Methods of getting better acquainted with the user and/or the problem, and of generating novel solutions: generative methods; and (2) Methods of assessing solutions (through various phases of the designing process): testing methods. The first category of methods concentrates on the designing process. In other words: how can the designer realise as much as possible of the workability of (domotics) products during the designing process? The second category aims at testing a design (in whatever shape: drawing, prototype, functional computer animation, etc.) through its users. These are methods of assessing a design at various stages of the designing process [nl

New laboratory methods to study tooth surface coverage and interproximal plaque control by dentifrice products.

Science.gov (United States)

Xu, Tao; Herles, Susan M; Barnes, Virginia M

2004-01-01

To develop and test an in vitro tooth model for use in conjunction with laboratory methods to study interproximal effects and efficacy of dentifrices. The application of the model should offer visual evaluation of dentifrice coverage of the tooth surface, and measure dental plaque control at posterior interdental spaces with a dentifrice. The dentifrice products tested with the model were: Colgate Total 2 in 1 Toothpaste and Mouthwash (CTTM), Colgate Total dentifrice (CTD), and Colgate Regular dentifrice (CRD). Extracted human posterior teeth were disinfected, cleaned, aligned, and mounted in denture acrylic. In the area coverage method, tooth surface coverage and penetration of two different forms of dentifrice products (CTTM and CRD) were compared using digital photography. In the interproximal plaque control method, the teeth were coated with human saliva and incubated anaerobically with a mixture of representative oral bacteria for six hours at 37 degrees C. In vitro dental plaque was assessed after brushing the facial surface with one of the three dentifrice products using a clinical plaque scoring index. The area coverage method demonstrated that both dentifrice products tested covered approximately 70% of the facial tooth surface; the CTTM dentifrice coverage on the lingual tooth surface was significantly higher than the coverage for the CRD dentifrice. With the interproximal plaque control method, in the presence of an active ingredient, the CTTM dentifrice had equivalent efficacy to the CTD dentifrice. Both CTTM and CTD were significantly superior to the CRD for interproximal dental plaque control. Using the developed tooth model, two assessment methods have been shown to have the potential to demonstrate tooth surface coverage, and to assess the potential efficacy of a dentifrice for the control of interproximal dental plaque. This process can indicate potential clinical evaluation of an oral care product, and support clinical findings with controlled

Chemical Methods for Peptide and Protein Production

Directory of Open Access Journals (Sweden)

Istvan Toth

2013-04-01

Full Text Available Since the invention of solid phase synthetic methods by Merrifield in 1963, the number of research groups focusing on peptide synthesis has grown exponentially. However, the original step-by-step synthesis had limitations: the purity of the final product decreased with the number of coupling steps. After the development of Boc and Fmoc protecting groups, novel amino acid protecting groups and new techniques were introduced to provide high quality and quantity peptide products. Fragment condensation was a popular method for peptide production in the 1980s, but unfortunately the rate of racemization and reaction difficulties proved less than ideal. Kent and co-workers revolutionized peptide coupling by introducing the chemoselective reaction of unprotected peptides, called native chemical ligation. Subsequently, research has focused on the development of novel ligating techniques including the famous click reaction, ligation of peptide hydrazides, and the recently reported a-ketoacid-hydroxylamine ligations with 5-oxaproline. Several companies have been formed all over the world to prepare high quality Good Manufacturing Practice peptide products on a multi-kilogram scale. This review describes the advances in peptide chemistry including the variety of synthetic peptide methods currently available and the broad application of peptides in medicinal chemistry.

Separation of cesium-137 from uranium fission products via a NeoflonR column supporting tetraphenylboron

International Nuclear Information System (INIS)

Whitney, C.D.; Landsberger, S.

2009-01-01

Cesium is a member of the Group I alkali metals, very reactive earth metals that react vigorously with both air and water. The chemistry of cesium is much like the chemistry of neighboring elements on the periodic table, potassium and rubidium. This close relation creates many problems in plant-life exposed to cesium because it is so easily confused for potassium, an essential nutrient to plants. Radioactive 134 Cs and 137 Cs are also chemically akin to potassium and stable cesium. Uptake of these radioactive isotopes from groundwater by plant-life destroys the plant-life and can potentially expose humans to the radioactive affects of 134 Cs and 137 Cs. Much experimental work has been focused on the separation of 137 Cs from uranium fission products. In previous experimental work performed a column consisting of Kel-F supporting tetraphenylboron (TPB) was utilized to separate 137 Cs from uranium fission products. It is of interest at this time to attempt the separation of 134 Cs from 0.01M EDTA using the same method and Neoflon in the place of Kel-F as the inert support. The results of this experiment give a separation efficiency of 88% and show a linear relationship between the column bed length and the separation efficiency obtained. (author)

Self-supporting method; an alternative method for steel truss bridge element replacement

Science.gov (United States)

Arsyad, Muhammad; Sangadji, Senot; As'ad, Sholihin

2017-11-01

Steel truss bridge often requires replacement of its element due to serious damage caused by traffic accidents. This replacement is carried out using temporary supporting structure. It would be difficult when the available space for the temporary structure is quite limited and or the position of work is at a high elevation. The self-supporting method is proposed instead of temporary supporting structure. This paper will discuss an innovative method of bridge rehabilitation by utilizing the existing bridge structure. It requires such temporary connecting structure that installed on the existing bridge element, therefore, the forces during replacement process could be transferred to the bridge foundation directly. By taking the case on a steel truss bridge Jetis Salatiga which requires element replacement due to its damages on two main diagonals, a modeling is carried out to get a proper repair method. Structural analysis is conducted for three temporary connecting structure models: “I,” “V,” and triangular model. Stresses and translations that occur in the structure are used as constraints. Bridge bearings are modeled in two different modes: fixed-fixed system and fixed-free one. Temperature load is given in each condition to obtain the appropriate time for execution. The triangular model is chosen as the best one. In the fixed-fixed mode, this method can be carried out in a temperature range 27-28.8° C, while in fixed-free one, the temperature it is allowed between 27-43.4 °C. The D4 is dismantled first by cutting the D4 leaving an area of 1140.2 mm2 or 127 mm web length to enable plastic condition until the D4 collapses. At the beginning of elongation occurs, immediately performed a slowly jacking on a temporary connecting structure so that the force on D4 is gradually transferred to the temporary connecting structure then the D4 and D5 are set in their place.

A new approach to collaborative creativity support of new product designers

NARCIS (Netherlands)

Bitter-Rijpkema, Marlies; Sloep, Peter; Sie, Rory; Van Rosmalen, Peter; Retalis, Simos; Katsamani, Mary

2010-01-01

Bitter-Rijpkema, M., Sloep, P. B., Sie, R., Van Rosmalen, P., Retalis, S., & Katsamani, M. (2011). A new approach to collaborative creativity support of new product designers. International Journal of Web Based Communities, 7(4), 478-492. DOI: 10.1504/IJWBC.2011.042992

Control Method for Variable Speed Wind Turbines to Support Temporary Primary Frequency Control

DEFF Research Database (Denmark)

Wang, Haijiao; Chen, Zhe; Jiang, Quanyuan

2014-01-01

This paper develops a control method for variable speed wind turbines (VSWTs) to support temporary primary frequency control of power system. The control method contains two parts: (1) up-regulate support control when a frequency drop event occurs; (2) down-regulate support control when a frequen...

Some absolutely effective product methods

Directory of Open Access Journals (Sweden)

H. P. Dikshit

1992-01-01

Full Text Available It is proved that the product method A(C,1, where (C,1 is the Cesàro arithmetic mean matrix, is totally effective under certain conditions concerning the matrix A. This general result is applied to study absolute Nörlund summability of Fourier series and other related series.

Method for the production of primary amines

NARCIS (Netherlands)

Baldenius, Kai-Uwe; Ditrich, Klaus; Breurer, Michael; Navickas, Vaidotas; Janssen, Dick; Crismaru, Ciprian; Bartsch, Sebastian

2014-01-01

The present invention relates to a novel enzymatically catalyzed method for the production of aliphatic primary amines, which method comprises the enzymatic oxidation of a primary aliphatic alcohol catalyzed by an alcohol dehydrogenase, amination of the resulting oxocompound catalyzed by a

A method for the determination of acrylamide in bakery products using ion trap LC-ESI-MS/MS.

Science.gov (United States)

Claus, Achim; Weisz, Georg M; Kammerer, Dietmar R; Carle, Reinhold; Schieber, Andreas

2005-10-01

Acrylamide levels of bakery products, e. g., bread and bread rolls, are usually below 100 microg/kg , often even below 50 microg/kg. Therefore, usual analytical methods which have an LOQ greater, not dbl equals 25 microg/kg are not sensitive enough for detailed investigations on acrylamide formation within these commodities. An improved method for trace level determination of acrylamide in bakery products was developed using ion trap LC-ESI-MS/MS. Samples were divided into crumbs and crusts to achieve an initial concentration by removing the crumbs since these are devoid of acrylamide. After sample extraction and clean-up using multimode SPE cartridges, further analyte enrichment was accomplished by solid-phase-supported liquid-liquid extraction with ethyl acetate prior to LC-MS/MS analysis. The method was evaluated using bread, bread rolls, alkali-baked bread rolls, and toast. LOQ was calculated from the confidence interval of the calibration curve and found to be 1.7 ng/mL, corresponding to 17 microg/kg of product. When crumbs and crusts were separated, an LOQ of 10.2 microg/kg of bakery product could be obtained. As demonstrated in preliminary comparative analyses, accuracy of the method met the requirements for determination of trace level acrylamide formation in bakery products. Mean recovery was 102.4% (CV 4.5%), intermediate reproducibility revealed a CV of 2.1%, and a repeatability of CV 6.0%.

Track Circuit Fault Diagnosis Method based on Least Squares Support Vector

Science.gov (United States)

Cao, Yan; Sun, Fengru

2018-01-01

In order to improve the troubleshooting efficiency and accuracy of the track circuit, track circuit fault diagnosis method was researched. Firstly, the least squares support vector machine was applied to design the multi-fault classifier of the track circuit, and then the measured track data as training samples was used to verify the feasibility of the methods. Finally, the results based on BP neural network fault diagnosis methods and the methods used in this paper were compared. Results shows that the track fault classifier based on least squares support vector machine can effectively achieve the five track circuit fault diagnosis with less computing time.

Comparison of methods for estimating carbon in harvested wood products

International Nuclear Information System (INIS)

Claudia Dias, Ana; Louro, Margarida; Arroja, Luis; Capela, Isabel

2009-01-01

There is a great diversity of methods for estimating carbon storage in harvested wood products (HWP) and, therefore, it is extremely important to agree internationally on the methods to be used in national greenhouse gas inventories. This study compares three methods for estimating carbon accumulation in HWP: the method suggested by Winjum et al. (Winjum method), the tier 2 method proposed by the IPCC Good Practice Guidance for Land Use, Land-Use Change and Forestry (GPG LULUCF) (GPG tier 2 method) and a method consistent with GPG LULUCF tier 3 methods (GPG tier 3 method). Carbon accumulation in HWP was estimated for Portugal under three accounting approaches: stock-change, production and atmospheric-flow. The uncertainty in the estimates was also evaluated using Monte Carlo simulation. The estimates of carbon accumulation in HWP obtained with the Winjum method differed substantially from the estimates obtained with the other methods, because this method tends to overestimate carbon accumulation with the stock-change and the production approaches and tends to underestimate carbon accumulation with the atmospheric-flow approach. The estimates of carbon accumulation provided by the GPG methods were similar, but the GPG tier 3 method reported the lowest uncertainties. For the GPG methods, the atmospheric-flow approach produced the largest estimates of carbon accumulation, followed by the production approach and the stock-change approach, by this order. A sensitivity analysis showed that using the ''best'' available data on production and trade of HWP produces larger estimates of carbon accumulation than using data from the Food and Agriculture Organization. (author)

Validation of Land Cover Products Using Reliability Evaluation Methods

Directory of Open Access Journals (Sweden)

Wenzhong Shi

2015-06-01

Full Text Available Validation of land cover products is a fundamental task prior to data applications. Current validation schemes and methods are, however, suited only for assessing classification accuracy and disregard the reliability of land cover products. The reliability evaluation of land cover products should be undertaken to provide reliable land cover information. In addition, the lack of high-quality reference data often constrains validation and affects the reliability results of land cover products. This study proposes a validation schema to evaluate the reliability of land cover products, including two methods, namely, result reliability evaluation and process reliability evaluation. Result reliability evaluation computes the reliability of land cover products using seven reliability indicators. Process reliability evaluation analyzes the reliability propagation in the data production process to obtain the reliability of land cover products. Fuzzy fault tree analysis is introduced and improved in the reliability analysis of a data production process. Research results show that the proposed reliability evaluation scheme is reasonable and can be applied to validate land cover products. Through the analysis of the seven indicators of result reliability evaluation, more information on land cover can be obtained for strategic decision-making and planning, compared with traditional accuracy assessment methods. Process reliability evaluation without the need for reference data can facilitate the validation and reflect the change trends of reliabilities to some extent.

Method for anaerobic fermentation and biogas production

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to a method for biomass processing, anaerobic fermentation of the processed biomass, and the production biogas. In particular, the invention relates to a system and method for generating biogas from anaerobic fermentation of processed organic material that comprises...

A Comparison of underground opening support design methods in jointed rock mass

International Nuclear Information System (INIS)

Gharavi, M.; Shafiezadeh, N.

2008-01-01

It is of great importance to consider long-term stability of rock mass around the openings of underground structure. during design, construction and operation of the said structures in rock. In this context. three methods namely. empirical. analytical and numerical have been applied to design and analyze the stability of underground infrastructure at the Siah Bisheh Pumping Storage Hydro-Electric Power Project in Iran. The geological and geotechnical data utilized in this article were selected and based on the preliminary studies of this project. In the initial stages of design. it was recommended that, two methods of rock mass classification Q and rock mass rating should be utilized for the support system of the underground cavern. Next, based on the structural instability, the support system was adjusted by the analytical method. The performance of the recommended support system was reviewed by the comparison of the ground response curve and rock support interactions with surrounding rock mass, using FEST03 software. Moreover, for further assessment of the realistic rock mass behavior and support system, the numerical modeling was performed utilizing FEST03 software. Finally both the analytical and numerical methods were compared, to obtain satisfactory results complimenting each other

Support vector machines in analysis of top quark production

International Nuclear Information System (INIS)

Vaiciulis, A.

2003-01-01

The Support Vector Machine (SVM) learning algorithm is a new alternative to multivariate methods such as neural networks. Potential applications of SVMs in high energy physics include the common classification problem of signal/background discrimination as well as particle identification. A comparison of a conventional method and an SVM algorithm is presented here for the case of identifying top quark events in Run II physics at the CDF experiment

A Hierarchical Approach Using Machine Learning Methods in Solar Photovoltaic Energy Production Forecasting

Directory of Open Access Journals (Sweden)

Zhaoxuan Li

2016-01-01

Full Text Available We evaluate and compare two common methods, artificial neural networks (ANN and support vector regression (SVR, for predicting energy productions from a solar photovoltaic (PV system in Florida 15 min, 1 h and 24 h ahead of time. A hierarchical approach is proposed based on the machine learning algorithms tested. The production data used in this work corresponds to 15 min averaged power measurements collected from 2014. The accuracy of the model is determined using computing error statistics such as mean bias error (MBE, mean absolute error (MAE, root mean square error (RMSE, relative MBE (rMBE, mean percentage error (MPE and relative RMSE (rRMSE. This work provides findings on how forecasts from individual inverters will improve the total solar power generation forecast of the PV system.

Productivity assessment of timber harvesting techniques for supporting sustainable forest management of secondary Atlantic Forests in southern Brazil

Directory of Open Access Journals (Sweden)

Pedro Caldas Britto

2017-12-01

Full Text Available The Atlantic Forest in southern Brazil has been subject to overexploitation in the past prompting the formulation of a rigorous conservation orientated policy by the government including a strict ban of timber harvesting. In the region, the forestland is owned by farmers. The economic value of the forest is rather limited for those farmers, because of the prohibition of commercial timber harvesting as a source of income. Sustainable forest management systems can offer great potential as new income opportunities for land holders, and further actively support the process of ecosystem rehabilitation and protection for these ecosystems. Yet, successful implementation of such sustainable management systems requires feasible and adapted timber harvesting systems. In order to develop such harvesting systems, a regional comparative case study was conducted at a typical smallholder forestry venture with the objective to analyze and evaluate harvesting methods supporting sustainable management of the Atlantic Forest. This study assessed production rates and associated costs of a common conventional timber harvesting method (CM and a proposed alternative method (AM. CM was performed by a selected, typical forest landowner who had only basic training in chainsaw operations, but 20 years of experience at the wood yard of his small sawmill. In contrast, the AM employed a professional chainsaw operator from the Amazon forest, trained and experienced in reduced impact logging techniques using state of the art equipment, supplemented by a snatch block and a skidding cone for improved extraction. Time study based models identified tree volume, winching distance and skidding distance to the landing as the most significant independent variables affecting productivity. Total net productivity ranged from 4.9 m³ PMH0-1 for CM to 3.1 m³ PMH0-1 for AM. Corresponding gross-productivity ranged from 3.0 m³ SMH-1 to 1.9 m³ SMH-1 with an overall mean utilization rate of

Machine Learning Methods for Production Cases Analysis

Science.gov (United States)

Mokrova, Nataliya V.; Mokrov, Alexander M.; Safonova, Alexandra V.; Vishnyakov, Igor V.

2018-03-01

Approach to analysis of events occurring during the production process were proposed. Described machine learning system is able to solve classification tasks related to production control and hazard identification at an early stage. Descriptors of the internal production network data were used for training and testing of applied models. k-Nearest Neighbors and Random forest methods were used to illustrate and analyze proposed solution. The quality of the developed classifiers was estimated using standard statistical metrics, such as precision, recall and accuracy.

46 CFR 57.06-3 - Method of performing production testing.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Method of performing production testing. 57.06-3 Section 57.06-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Production Tests § 57.06-3 Method of performing production testing. (a) Except as...

Social Support and Work Stress: A Mixed Method Analysis

Directory of Open Access Journals (Sweden)

Vânia Lúcia Pereira de Andrade

2017-12-01

Full Text Available Occupational stress and coping strategies have increasingly become the focus of research for their applied feature. The aim of this study was to investigate how social support has helped people deal with stressful situations in the workplace. In order to reach this aim an exploratory mixed method embedded research design was conducted. Study 1, quantitative, described the level of satisfaction with social support and perceived organizational support by employing a scale that summarized factors of the perceived organizational support. Study 2, a qualitative one, sought to describe the stressors in the workplace environment, to whom the workers resorted to, and the kind of perceived social support. The group interview script was based on the dimensions proposed by Folkman e Lazarus (1985 model. Fifty-one volunteer workers participated in the study. Results showed a lack of social support in the workplace: incivility of colleagues and managers, psychological contract breach and conflict of values. Investments in personal development that stimulate urbanity in organizations and a listening space for employees are suggested actions that can benefit affective dimensions of work.

Decision Support Methods for Supply Processes in the Floral Industry

Directory of Open Access Journals (Sweden)

Kutyba Agata

2017-12-01

Full Text Available The aim of this paper was to show the application of the ABC and AHP (multi-criteria method for hierarchical analysis of decision processes as an important part of decision making in supply processes which are realized in the floral industry. The ABC analysis was performed in order to classify the product mix from the perspective of the demand values. This in consequence enabled us to identify the most important products which were then used as a variant in the AHP method.

Method for extracting protein from a fermentation product

Science.gov (United States)

Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

2014-02-18

A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

Analytical Methods Development in Support of the Caustic Side Solvent Extraction System

International Nuclear Information System (INIS)

Maskarinec, M.P.

2001-01-01

The goal of the project reported herein was to develop and apply methods for the analysis of the major components of the solvent system used in the Caustic-Side Solvent Extraction Process (CSSX). These include the calix(4)arene, the modifier, 1-(2,2,3,3- tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol and tri-n-octylamine. In addition, it was an objective to develop methods that would allow visualization of other components under process conditions. These analyses would include quantitative laboratory methods for each of the components, quantitative analysis of expected breakdown products (4-see-butylphenol and di-n-octylamine), and qualitative investigations of possible additional breakdown products under a variety of process extremes. These methods would also provide a framework for process analysis should a pilot facility be developed. Two methods were implemented for sample preparation of aqueous phases. The first involves solid-phase extraction and produces quantitative recovery of the solvent components and degradation products from the various aqueous streams. This method can be automated and is suitable for use in radiation shielded facilities. The second is a variation of an established EPA liquid-liquid extraction procedure. This method is also quantitative and results in a final extract amenable to virtually any instrumental analysis. Two HPLC methods were developed for quantitative analysis. The first is a reverse-phase system with variable wavelength W detection. This method is excellent from a quantitative point of view. The second method is a size-exclusion method coupled with dual UV and evaporative light scattering detectors. This method is much faster than the reverse-phase method and allows for qualitative analysis of other components of the waste. For tri-n-octylamine and other degradation products, a GC method was developed and subsequently extended to GUMS. All methods have precision better than 5%. The combination of these methods

Methods for Engineering Enterprise Management Based on the Inter-factor Productive-Economic Relations

Directory of Open Access Journals (Sweden)

O. A. Naydis

2015-01-01

Full Text Available The article analyzes the current state of engineering enterprises in the Russian Federation. It conducts a review and analysis of existing methods for business management using indicators to characterize enterprise activities by means of the scalars, functional dependencies of one factor value on the other (function one, wherein the magnitude of one factor value corresponds to a single magnitude of the other value - a dependent factor, as well as by means of data tables, and, as an example, by balance list and articulation statement used in accounting. The paper gives statements of need for taking into account the mutual influences and system interrelation of factors diversity and for special methods of their identification. The article is aimed at development of methods for business management of engineering enterprises taking into account a variety of factors and their interdependencies. The relevance of the issue stems from the fact that the analysis of existing methods of business management has shown that it is impossible to have the requested information about a considerable number of productive-economic factors in their system-based interrelation. There is a proposal for the management objects wherein multiple factors and their interactions are taken into consideration to be called inter-factor productive-economic relations (IPER. The paper presents the IPER-based structure of the business management system. It describes a method to identify controlled productive-economic factors and provides allocation and justification of the significant ones for the IPER control. Described methods of business management are distinguished by a large amount of control information, and data form rather complex structures. Therefore, it is proposed to use them in automatic control systems. The paper describes principles of information support for business management through binding IPER to organizational structures of the enterprise. It offers an

Method for indirect quantification of CH4 production via H2O production using hydrogenotrophic methanogens

Directory of Open Access Journals (Sweden)

Ruth-Sophie eTaubner

2016-04-01

Full Text Available ydrogenotrophic methanogens are an intriguing group of microorganisms from the domain Archaea. They exhibit extraordinary ecological, biochemical, physiological characteristics colorbox{yellow}{and have a huge biotechnological potential}. Yet, the only possibility to assess the methane (CH$_4$ production potential of hydrogenotrophic methanogens is to apply gas chromatographic quantification of CH$_4$.In order to be able to effectively screen pure cultures of hydrogenotrophic methanogens regarding their CH$_4$ production potential we developed a novel method for indirect quantification of colorbox{yellow}{the} volumetric CH$_4$ production rate by measuring colorbox{yellow}{the} volumetric water production rate. This colorbox{yellow}{ } method was established in serum bottles for cultivation of methanogens in closed batch cultivation mode. Water production was colorbox{yellow}{estimated} by determining the difference in mass increase in an isobaric setting.This novel CH$_4$ quantification method is an accurate and precise analytical technique, colorbox{yellow}{which can be used} to rapidly screen pure cultures of methanogens regarding colorbox{yellow}{their} volumetric CH$_{4}$ evolution rate. colorbox{yellow}{It} is a cost effective alternative colorbox{yellow}{determining} CH$_4$ production of methanogens over CH$_4$ quantification by using gas chromatography, especially if colorbox{yellow}{ } applied as a high throughput quantification method. colorbox{yellow}{Eventually, the} method can be universally applied for quantification of CH$_4$ production from psychrophilic, thermophilic and hyperthermophilic hydrogenotrophic methanogens.

Gradient-based methods for production optimization of oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Suwartadi, Eka

2012-07-01

Production optimization for water flooding in the secondary phase of oil recovery is the main topic in this thesis. The emphasis has been on numerical optimization algorithms, tested on case examples using simple hypothetical oil reservoirs. Gradientbased optimization, which utilizes adjoint-based gradient computation, is used to solve the optimization problems. The first contribution of this thesis is to address output constraint problems. These kinds of constraints are natural in production optimization. Limiting total water production and water cut at producer wells are examples of such constraints. To maintain the feasibility of an optimization solution, a Lagrangian barrier method is proposed to handle the output constraints. This method incorporates the output constraints into the objective function, thus avoiding additional computations for the constraints gradient (Jacobian) which may be detrimental to the efficiency of the adjoint method. The second contribution is the study of the use of second-order adjoint-gradient information for production optimization. In order to speedup convergence rate in the optimization, one usually uses quasi-Newton approaches such as BFGS and SR1 methods. These methods compute an approximation of the inverse of the Hessian matrix given the first-order gradient from the adjoint method. The methods may not give significant speedup if the Hessian is ill-conditioned. We have developed and implemented the Hessian matrix computation using the adjoint method. Due to high computational cost of the Newton method itself, we instead compute the Hessian-timesvector product which is used in a conjugate gradient algorithm. Finally, the last contribution of this thesis is on surrogate optimization for water flooding in the presence of the output constraints. Two kinds of model order reduction techniques are applied to build surrogate models. These are proper orthogonal decomposition (POD) and the discrete empirical interpolation method (DEIM

Using Computer Simulation Method to Improve Throughput of Production Systems by Buffers and Workers Allocation

Directory of Open Access Journals (Sweden)

Kłos Sławomir

2015-12-01

Full Text Available This paper proposes the application of computer simulation methods to support decision making regarding intermediate buffer allocations in a series-parallel production line. The simulation model of the production system is based on a real example of a manufacturing company working in the automotive industry. Simulation experiments were conducted for different allocations of buffer capacities and different numbers of employees. The production system consists of three technological operations with intermediate buffers between each operation. The technological operations are carried out using machines and every machine can be operated by one worker. Multi-work in the production system is available (one operator operates several machines. On the basis of the simulation experiments, the relationship between system throughput, buffer allocation and the number of employees is analyzed. Increasing the buffer capacity results in an increase in the average product lifespan. Therefore, in the article a new index is proposed that includes the throughput of the manufacturing system and product life span. Simulation experiments were performed for different configurations of technological operations.

Using non-parametric methods in econometric production analysis

DEFF Research Database (Denmark)

Czekaj, Tomasz Gerard; Henningsen, Arne

2012-01-01

by investigating the relationship between the elasticity of scale and the farm size. We use a balanced panel data set of 371~specialised crop farms for the years 2004-2007. A non-parametric specification test shows that neither the Cobb-Douglas function nor the Translog function are consistent with the "true......Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify a functional form of the production function of which the Cobb...... parameter estimates, but also in biased measures which are derived from the parameters, such as elasticities. Therefore, we propose to use non-parametric econometric methods. First, these can be applied to verify the functional form used in parametric production analysis. Second, they can be directly used...

How is research evidence used to support claims made in advertisements for wound care products?

Science.gov (United States)

Dumville, Jo C; Petherick, Emily S; O'Meara, Susan; Raynor, Pauline; Cullum, Nicky

2009-05-01

To investigate the amount, type and accuracy of citations use in support of product related claims from advertisements of wound care products. Although articles submitted to most medical journals are subjected to peer review, such scrutiny is often not required for the content of advertisements. A contents survey of advertisements from two wound care journals (Journal of Wound Care and Ostomy Wound Management) from 2002-2003 and the British Medical Journal, 2002-2003. Data collected from advertisements included identification of product related claims made and any corresponding citations. Where journal articles were cited to support claims, the articles were obtained. Where data on file were cited, this material was requested. In each case the accuracy of claims in relation to the content of the supporting citation was assessed. The use of citations to support product related claims was infrequent in advertisements from wound care journals, where 35% of advertisements containing a product related claim also contained at least one citation, compared with 63% of advertisements from the British Medical Journal. Of citations that were supplied, journal articles were less common in the wound journals (40% vs. 73% in the British Medical Journal) and data on file more common (38% vs. 6% in the British Medical Journal). Where journal articles were obtained, 56% of claims in the wound care journals advertisements were not supported by the cited article, compared with 12% of claims in the British Medical Journal. The wound journals advertised predominantly medical devices. The use and accuracy of referencing in advertisements from wound care journals was poor. Nurses have increasing responsibilities for the prescribing of both drugs and devices, which must be accompanied by the ability to interpret marketing materials and research evidence critically. Nurse educators must ensure that nurse education generally and nurse prescriber training particularly, builds skills of

Peptide Synthesis Method and Solid Support for Use in the Method

DEFF Research Database (Denmark)

1994-01-01

A method for the solid-phase synthesis of peptides or proteins in high yield and high purity uses a solid support consisting of a functionalized polystyrene-grafted polymer substrate, the grafted polystyrene chains being substantially non-cross-linked and having a chain molecular weight, not incl...... is immersed in a solution of optionally substituted styrene monomer in an alcohol such as methanol, the volume percentage of styrene in the solution preferably being about 30% v/v, and subjected to gamma irradiation....

Method of reprocessing radioactive asphalt solidification products

International Nuclear Information System (INIS)

Nakaya, Iwao; Murakami, Tadashi; Miyake, Takafumi; Inagaki, Yuzo.

1986-01-01

Purpose: To obtain heat-stable solidification products and decrease the total volume thereof by modifying the solidified form by the reprocessing of existent radioactive asphalt solidification products. Method: Radioactive asphalt solidification products are heated into a fluidized state. Then, incombustible solvents such as perchloroethylene or trichloroethylene are added to a dissolving tank to gradually dissolve the radioactive asphalt solidification products. Thus, organic materials such as asphalts are transferred into the solvent layer, while inorganic materials containing radioactive materials remain as they are in the separation tank. Then, the inorganic materials containing the radioactive materials are taken out and then solidified, for example, by converting them into a rock or glass form. (Kawakami, Y.)

Decision Support System to Choose Digital Single Lens Camera with Simple Additive Weighting Method

Directory of Open Access Journals (Sweden)

Tri Pina Putri

2016-11-01

Full Text Available One of the technologies that evolve today is Digital Single Lens Reflex (DSLR camera. The number of products makes users have difficulties to choose the appropriate camera based on their criteria. Users may utilize several ways to help them choosing the intended camera such as using magazine, internet, and other media. This paper discusses about a web based decision support system to choose cameras by using SAW (Simple Additive Weighting method in order to make the decision process more effective and efficient. This system is expected to give recommendations about the camera which is appropriate with the user’s need and criteria based on the cost, the resolution, the feature, the ISO, and the censor. The system was implemented by using PHP and MySQL. Based on the result of questionnaire distributed to 20 respondents, 60% respondents agree that this decision support system can help users to choose the appropriate camera DSLR in accordance with the user’s need, 60% of respondents agree that this decision support system is more effective to choose DSLR camera and 75% of respondents agree that this system is more efficient. In addition, 60.55% of respondents agree that this system has met 5 Es Usability Framework.

Method of processing solidification product of radioactive waste

International Nuclear Information System (INIS)

Daime, Fumiyoshi.

1988-01-01

Purpose: To improve the long-time stability of solidification products by providing solidification products with liquid tightness, gas tightness, abrasion resistance, etc., of the products in the course of the solidification for the treatment of radioactive wastes. Method: The surface of solidification products prepared by mixing solidifying agents with powder or pellets is entirely covered with high molecular polymer such as epoxy resin. The epoxy resin has excellent properties such as radiation-resistance, heat resistance, water proofness and chemical resistance, as well as have satisfactory mechanical properties. This can completely isolate the solidification products of radioactive wastes from the surrounding atmosphere. (Yoshino, Y.)

Method of producing gaseous products using a downflow reactor

Science.gov (United States)

Cortright, Randy D; Rozmiarek, Robert T; Hornemann, Charles C

2014-09-16

Reactor systems and methods are provided for the catalytic conversion of liquid feedstocks to synthesis gases and other noncondensable gaseous products. The reactor systems include a heat exchange reactor configured to allow the liquid feedstock and gas product to flow concurrently in a downflow direction. The reactor systems and methods are particularly useful for producing hydrogen and light hydrocarbons from biomass-derived oxygenated hydrocarbons using aqueous phase reforming. The generated gases may find used as a fuel source for energy generation via PEM fuel cells, solid-oxide fuel cells, internal combustion engines, or gas turbine gensets, or used in other chemical processes to produce additional products. The gaseous products may also be collected for later use or distribution.

Remote methods of indicating oil products in natural waters

Energy Technology Data Exchange (ETDEWEB)

Shlyakhova, L A

1981-01-01

A survey is made of domestic and foreign publications covering remote methods of monitoring film petroleum products and oil in natural waters. The given methods are realized in practice with the use of different sections of the electromagnetic spectrum. Remote quality control of the natural waters at the modern level may be an indicator of water pollution with film petroleum products.

Agricultural Production. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Tully, Chris

This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with agricultural production. SMAT materials…

Methods for high yield production of terpenes

Energy Technology Data Exchange (ETDEWEB)

Kutchan, Toni; Higashi, Yasuhiro; Feng, Xiaohong

2017-01-03

Provided are enhanced high yield production systems for producing terpenes in plants via the expression of fusion proteins comprising various combinations of geranyl diphosphate synthase large and small subunits and limonene synthases. Also provided are engineered oilseed plants that accumulate monoterpene and sesquiterpene hydrocarbons in their seeds, as well as methods for producing such plants, providing a system for rapidly engineering oilseed crop production platforms for terpene-based biofuels.

A method for assessing fidelity of delivery of telephone behavioral support for smoking cessation

OpenAIRE

Lorencatto, F.; West, R.; Bruguera, C.; Michie, S.

2014-01-01

Objectives: Behavioral support for smoking cessation is delivered through different modalities, often guided by treatment manuals. Recently developed methods for assessing fidelity of delivery have shown that face-to-face behavioral support is often not delivered as specified in the service treatment manual. This study aimed to extend this method to evaluate fidelity of telephone-delivered behavioral support. \\ud \\ud Method: A treatment manual and transcripts of 75 audio-recorded behavioral s...

Production and repair of metal supports as an indispensable activity of the Georgi Dimitrov mining and power combine

Energy Technology Data Exchange (ETDEWEB)

Mladenov, O

1979-07-01

Georgi Dimitrov underground mines have favoured metal supports over concrete slabs and timber since 1972 because of their well known advantages and because metal supports lend themselves to easy handling by 4-PU combines and 1PNB-2 loading machines. To eliminate bottlenecks and high costs of procurement from a central base individual mines were charged with production of their own metal supports. This resulted in some new developments, for example, in the production of supports with a 3.16 times greater capacity in the Marshall Tolbukhin and Al. Milenov mines in 1978. Hydraulic presses are generally used to produce conventional arch and ring type supports, and the Polish make PHPG-100 press is used for repairs. Decentralization also caused problems: different length timber and metal supports often necessitate additional cutting operations, a multitude of machines cause increased manual handling, and equipment is too often adapted to special requirements of individual shifts. However, costs of metal supports have dropped about 15%. Further improvement would require that the production of metal supports be centralized for the entire combine, supports be used according to their strength, and screw joinings be replaced with cotter type fastenings.

Dissolution testing of intermediary products in uranium dioxide production by the sol-gel method

International Nuclear Information System (INIS)

Melichar, F.; Landspersky, H.; Urbanek, V.

1979-01-01

A method was developed of dissolving polyuranates and uranium dioxides in sulphuric acid and in carbonate solutions for testing intermediate products in the sol-gel process preparation of uranium dioxide. A detailed granulometric analysis of spherical particle dispersion was included as part of the tests. Two different production methods were used for the two types of studied materials. The test results show that the test method is suitable for determining temperature sensitivity of the materials to dissolution reaction. The geometrical distribution of impurities in the spherical particles can be determined from the dissolution kinetics. The method allows the determination of the effect of carbon from impurities on the process of uranium dioxide leaching and is thus applicable for testing materials prepared by the sol-gel method. (Z.M.)

A direct method of natural frequency analysis on pipeline conveying fluid with both ends supported

International Nuclear Information System (INIS)

Huang Yimin; Ge Seng; Wu Wei; Jie He

2012-01-01

Highlights: ► A direct method which derived from Ferrari's method was used to solve quartic equations. ► Frequency equations of pipeline conveying fluid with both ends supported was studied. ► Each order natural frequencies can be obtained by using the direct method. ► The first five critical flow velocities were obtained by using numerical method. - Abstract: The natural frequency equations of fluid–structure interaction in pipeline conveying fluid with both ends supported is investigated by a direct method, and the direct method is derived from Ferrari's method which is used to solve quartic equations. The dynamic equation of pipeline conveying fluid with two variables is obtained by Hamilton's variation principle based on Euler–Bernoulli Beam theory. By using the separation of variables method and the derived method from Ferrari's method, the natural frequency equations and the critical flow velocity equations of pipeline conveying fluid with both ends supported are obtained in mathematical decoupling. Each order natural frequencies and critical flow velocities can be obtained by using numerical method. The first five order dimensionless critical flow velocities are obtained, and the results indicate that clamped–simply supported is less stable than clamped–clamped supported and more stable than simply–simply supported. All the conclusions can be applied to nuclear installations and other engineering fields of improving the vibration.

Scalable software architectures for decision support.

Science.gov (United States)

Musen, M A

1999-12-01

Interest in decision-support programs for clinical medicine soared in the 1970s. Since that time, workers in medical informatics have been particularly attracted to rule-based systems as a means of providing clinical decision support. Although developers have built many successful applications using production rules, they also have discovered that creation and maintenance of large rule bases is quite problematic. In the 1980s, several groups of investigators began to explore alternative programming abstractions that can be used to build decision-support systems. As a result, the notions of "generic tasks" and of reusable problem-solving methods became extremely influential. By the 1990s, academic centers were experimenting with architectures for intelligent systems based on two classes of reusable components: (1) problem-solving methods--domain-independent algorithms for automating stereotypical tasks--and (2) domain ontologies that captured the essential concepts (and relationships among those concepts) in particular application areas. This paper highlights how developers can construct large, maintainable decision-support systems using these kinds of building blocks. The creation of domain ontologies and problem-solving methods is the fundamental end product of basic research in medical informatics. Consequently, these concepts need more attention by our scientific community.

Methods for conversion of lignocellulosic-derived products to transportation fuel precursors

Science.gov (United States)

Lilga, Michael A.; Padmaperuma, Asanga B.

2017-10-03

Methods are disclosed for converting a biomass-derived product containing levulinic acid and/or gamma-valerolactone to a transportation fuel precursor product containing diesel like hydrocarbons. These methods are expected to produce fuel products at a reduced cost relative to conventional approaches.

A THEORETICAL MODEL OF SOCIO-PSYCHOLOGICAL SUPPORT WORK PROCESSES FOR MANAGEMENT OF PRODUCTION TEAM

Directory of Open Access Journals (Sweden)

Tatyana Gennadevna Pronyushkina

2015-10-01

Full Text Available This article discusses the management of production team, in particular the developed theoretical model of socio-psychological support work processes for management of production team. The author of the research are formulated the purpose and objectives of social-psychological work on management of the production team. Developed in the study a theoretical model aimed at determining the conditions and the identification of features of effective management of the enterprise taking into account the socio-psychological characteristics of its staff. Tasks include: definition of the main characteristics of the production team and their severity, the analysis of these characteristics and identifying opportunities for their transformation, development of recommendations for management of social-psychological work on effects on the characteristics of the collective enterprise.Practical study of the activities of a number of businesses have shown the need to improve socio-psychological support of management processes production team: introducing a social and psychological planning team and develop the practice of sociological research on the state of the team, to ensure the smoothing of relations between workers and management through periodic meetings, creations of conditions for feedback, maintaining healthy competition among team members.

DEVELOPMENT OF TOFU PRODUCTION METHOD WITH PROBIOTIC BACTERIA ADDITION

Directory of Open Access Journals (Sweden)

Dorota Zielińska

2015-06-01

Full Text Available The aim of the study was to develop a production method for tofu with probiotic bacteria under laboratory conditions. The works included: selection of a strain and tofu production conditions, and a storage test of the manufactured product. It was concluded that the sensory quality of tofu with the addition of different probiotic cultures did not differ significantly (p>0.01, depending on used strains and their mixtures, and the sample quality was comparable to the commercial product. It was observed that the number of Lactobacillus bacteria in study samples was the factor determining the palatability of tofu (r= 0.75. On the other hand, the sensory quality of products was significantly affected by the production method of tofu with the addition of probiotic bacteria. It was concluded that the formation of curds from soy beverage by the addition of CaSO4, followed by inoculation with Lactobacillus casei ŁOCK 0900 at the amount of 9.26 log CFU/g and incubation at temp. of 37C for 2h as well as for 20h are methods recommended for production tofu with regard to sensory qualities of the final product among all tested methods. The number of lactic acid bacteria in studied tofu samples was maintained at the high level (109-1010 CFU/g, and the number of Bifidobacterium animalis ssp lactis BB-12 bacteria did not exceed 103 CFU/g, whereas the number of Lactobacillus bacteria was equal to 108-109 CFU/g. For the period of 15 days of storage of tofu with probiotic bacteria at the temperature of 4C the number of lactic acid bacteria was maintained at the constant level of approx. 109 CFU/g. It was concluded that it is possible to produce tofu with probiotic bacteria that has acceptable sensory characteristics and a high number of lactic acid bacteria, therefore the product could be considered as a functional one.

CIRP Design 2012 Sustainable Product Development

CERN Document Server

2013-01-01

During its life cycle, a product produces waste that is over 20 times its weight. As such it is critical to develop products that are sustainable. Currently product development processes lack high quality methods and tools that are empirically validated to support development of sustainable products. This book is a compilation of over forty cutting edge international research papers from the 22nd CIRP International Design Conference, written by eminent researchers from 15 countries, on engineering design process, methods and tools, broadly for supporting sustainable product development.   A variety of new insights into the product development process, as well as a host of methods and tools that are at the cutting edge of design research are discussed and explained covering a range of diverse topics. The areas covered include: ·Sustainable design and manufacturing, ·Design synthesis and creativity, ·Global product development and product life cycle management, ·Design for X (safety, reliability, manufactu...

Challenges for Life Support Systems in Space Environments, Including Food Production

Science.gov (United States)

Wheeler, Raymond M.

2012-01-01

Environmental Control and Life Support Systems (ECLSS) refer to the technologies needed to sustain human life in space environments. Histor ically these technologies have focused on providing a breathable atmo sphere, clean water, food, managing wastes, and the associated monitoring capabilities. Depending on the space agency or program, ELCSS has sometimes expanded to include other aspects of managing space enviro nments, such as thermal control, radiation protection, fire detection I suppression, and habitat design. Other times, testing and providing these latter technologies have been associated with the vehicle engi neering. The choice of ECLSS technologies is typically driven by the mission profile and their associated costs and reliabilities. These co sts are largely defined by the mass, volume, power, and crew time req uirements. For missions close to Earth, e.g., low-Earth orbit flights, stowage and resupply of food, some 0 2, and some water are often the most cost effective option. But as missions venture further into spa ce, e.g., transit missions to Mars or asteroids, or surface missions to Moon or Mars, the supply line economics change and the need to clos e the loop on life support consumables increases. These are often ref erred to as closed loop or regenerative life support systems. Regardless of the technologies, the systems must be capable of operating in a space environment, which could include micro to fractional g setting s, high radiation levels, and tightly closed atmospheres, including perhaps reduced cabin pressures. Food production using photosynthetic o rganisms such as plants by nature also provides atmospheric regenerat ion (e.g., CO2 removal and reduction, and 0 2 production), yet to date such "bioregenerative" technologies have not been used due largely t o the high power requirements for lighting. A likely first step in te sting bioregenerative capabilities will involve production of small a mounts of fresh foods to supplement to crew

pp production cross sections and the constraint method

International Nuclear Information System (INIS)

Anjos, J.C.; Santoro, A.F.S.; Souza, M.H.G.

1983-01-01

A method of constructing production cross sections that satisfy the constraints represented by the first few moments is shown to give an excellent account of the data when applied to the high energy pp production cross section ν sub(n) (s) plotted as functions of n. (Author) [pt

Early Parental Positive Behavior Support and Childhood Adjustment: Addressing Enduring Questions with New Methods.

Science.gov (United States)

Waller, Rebecca; Gardner, Frances; Dishion, Thomas; Sitnick, Stephanie L; Shaw, Daniel S; Winter, Charlotte E; Wilson, Melvin

2015-05-01

A large literature provides strong empirical support for the influence of parenting on child outcomes. The current study addresses enduring research questions testing the importance of early parenting behavior to children's adjustment. Specifically, we developed and tested a novel multi-method observational measure of parental positive behavior support at age 2. Next, we tested whether early parental positive behavior support was related to child adjustment at school age, within a multi-agent and multi-method measurement approach and design. Observational and parent-reported data from mother-child dyads (N = 731; 49 percent female) were collected from a high-risk sample at age 2. Follow-up data were collected via teacher report and child assessment at age 7.5. The results supported combining three different observational methods to assess positive behavior support at age 2 within a latent factor. Further, parents' observed positive behavior support at age 2 predicted multiple types of teacher-reported and child-assessed problem behavior and competencies at 7.5 years old. Results supported the validity and predictive capability of a multi-method observational measure of parenting and the importance of a continued focus on the early years within preventive interventions.

Methods for production of aluminium powders and their application fields

Energy Technology Data Exchange (ETDEWEB)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S. (Vsesoyuznyj Nauchno-Issledovatel' skij i Proektnyj Inst. Alyuminievoj, magnievoj i ehlektrodnoj promyshlennosti (USSR))

1984-12-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short.

Methods for production of aluminium powders and their application fields

International Nuclear Information System (INIS)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S.

1984-01-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short

Effect of SiO 2-ZrO 2 supports prepared by a grafting method on hydrogen production by steam reforming of liquefied natural gas over Ni/SiO 2-ZrO 2 catalysts

Science.gov (United States)

Seo, Jeong Gil; Youn, Min Hye; Song, In Kyu

SiO 2-ZrO 2 supports with various zirconium contents are prepared by grafting a zirconium precursor onto the surface of commercial Carbosil silica. Ni(20 wt.%)/SiO 2-ZrO 2 catalysts are then prepared by an impregnation method, and are applied to hydrogen production by steam reforming of liquefied natural gas (LNG). The effect of SiO 2-ZrO 2 supports on the performance of the Ni(20 wt.%)/SiO 2-ZrO 2 catalysts is investigated. SiO 2-ZrO 2 prepared by a grafting method serves as an efficient support for the nickel catalyst in the steam reforming of LNG. Zirconia enhances the resistance of silica to steam significantly and increases the interaction between nickel and the support, and furthermore, prevents the growth of nickel oxide species during the calcination process through the formation of a ZrO 2-SiO 2 composite structure. The crystalline structures and catalytic activities of the Ni(20 wt.%)/SiO 2-ZrO 2 catalysts are strongly influenced by the amount of zirconium grafted. The conversion of LNG and the yield of hydrogen show volcano-shaped curves with respect to zirconium content. Among the catalysts tested, the Ni(20 wt.%)/SiO 2-ZrO 2 (Zr/Si = 0.54) sample shows the best catalytic performance in terms of both LNG conversion and hydrogen yield. The well-developed and pure tetragonal phase of ZrO 2-SiO 2 (Zr/Si = 0.54) appears to play an important role in the adsorption of steam and subsequent spillover of steam from the support to the active nickel. The small particle size of the metallic nickel in the Ni(20 wt.%)/SiO 2-ZrO 2 (Zr/Si = 0.54) catalyst is also responsible for its high performance.

Application of Expectation Maximization Method for Purchase Decision-Making Support in Welding Branch

Directory of Open Access Journals (Sweden)

Kujawińska Agnieszka

2016-06-01

Full Text Available The article presents a study of applying the proposed method of cluster analysis to support purchasing decisions in the welding industry. The authors analyze the usefulness of the non-hierarchical method, Expectation Maximization (EM, in the selection of material (212 combinations of flux and wire melt for the SAW (Submerged Arc Welding method process. The proposed approach to cluster analysis is proved as useful in supporting purchase decisions.

Toward fish and seafood traceability: anchovy species determination in fish products by molecular markers and support through a public domain database.

Science.gov (United States)

Jérôme, Marc; Martinsohn, Jann Thorsten; Ortega, Delphine; Carreau, Philippe; Verrez-Bagnis, Véronique; Mouchel, Olivier

2008-05-28

Traceability in the fish food sector plays an increasingly important role for consumer protection and confidence building. This is reflected by the introduction of legislation and rules covering traceability on national and international levels. Although traceability through labeling is well established and supported by respective regulations, monitoring and enforcement of these rules are still hampered by the lack of efficient diagnostic tools. We describe protocols using a direct sequencing method based on 212-274-bp diagnostic sequences derived from species-specific mitochondria DNA cytochrome b, 16S rRNA, and cytochrome oxidase subunit I sequences which can efficiently be applied to unambiguously determine even closely related fish species in processed food products labeled "anchovy". Traceability of anchovy-labeled products is supported by the public online database AnchovyID ( http://anchovyid.jrc.ec.europa.eu), which provided data obtained during our study and tools for analytical purposes.

A practical comparison of methods to assess sum-of-products

International Nuclear Information System (INIS)

Rauzy, A.; Chatelet, E.; Dutuit, Y.; Berenguer, C.

2003-01-01

Many methods have been proposed in the literature to assess the probability of a sum-of-products. This problem has been shown computationally hard (namely no. P-hard). Therefore, algorithms can be compared only from a practical point of view. In this article, we propose first an efficient implementation of the pivotal decomposition method. This kind of algorithms is widely used in the Artificial Intelligence framework. It is unfortunately almost never considered in the reliability engineering framework, but as a pedagogical tool. We report experimental results that show that this method is in general much more efficient than classical methods that rewrite the sum-of-products under study into an equivalent sum of disjoint products. Then, we derive from our method a factorization algorithm to be used as a preprocessing method for binary decision diagrams. We show by means of experimental results that this latter approach outperforms the formers

Perspectives on Spatial Decision Support Concerning Location of Biogas Production

DEFF Research Database (Denmark)

Bojesen, Mikkel

in biogas production. This ambition requires that more than 20 new large scale centralised biogas plants are built. The location of these plants is associated with a number of externalities and uncertainties and the existing biogas sector struggles to establish itself as a viable energy producing sector....... Meanwhile planners and decision makers struggle to find sustainable locations that comprehensively balance the multiple concerns the location of biogas facilities includes. This PhD project examines how spatial decision support models can be used to ensure sustainable locations of future biogas plants......, understand the industrial economic aspects of such a role. Through the use of spatial multi-criteria evaluation models stakeholder preferences to decision criteria are included in a sustainable biogas facility location analysis. By the use of these models it is demonstrated how overall biogas production...

Development and Application of an Evaluation Method for the Supporting Structure

International Nuclear Information System (INIS)

Lee, Young Ho; Lee, Kang Hee; Kim, Jae Yong; Yoon, Kyung Ho; Kim, Hyung Kyu

2009-01-01

A dual cooled fuel (i.e. annular fuel) has both internal and external cooling which would allow a substantial increase in power density and safety margins compared to a solid fuel in operating PWR plants. When considering the sufficient cross-sectional area of the internal cooling channel and an acceptable amount of fuel pellet, the diameter of an outer tube should be increased for applying the compatible design concept of the dual cooled fuel to current operating PWRs. However, this results in a narrow gap between a dual cooled fuel rod and its supporting structure due to a fixed fuel assembly size. As all the fuel rods should be supported with safety and reliability for operating periods, any kinds of supporting structures should be installed in a dual cooled fuel assembly. Consequently, the positions of supporting structures around the dual cooled fuel rod should be modified from the rod-to-rod center to subchannel regions of grid structure and their shapes are designed and improved based on the advantages of current spacer grid technologies. Even though the vibration characteristics of the dual cooled fuel rod itself were not systematically evaluated, the characteristics of designed supporting structures and their wear resistances should be evaluated at the initial development stage. In this study, the evaluation method for the characteristics of designed supporting structures is developed by using a new test rig and compared with the analytical results. The final objective is to develop the evaluation method of their fretting wear resistances which accommodates the various shape of supporting structures without actual Zirconium supporting structures

Methods and systems for chemoautotrophic production of organic compounds

Energy Technology Data Exchange (ETDEWEB)

Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

2018-02-27

The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

Official Methods for the Determination of Minerals and Trace Elements in Infant Formula and Milk Products: A Review.

Science.gov (United States)

Poitevin, Eric

2016-01-01

The minerals and trace elements that account for about 4% of total human body mass serve as materials and regulators in numerous biological activities in body structure building. Infant formula and milk products are important sources of endogenic and added minerals and trace elements and hence, must comply with regulatory as well as nutritional and safety requirements. In addition, reliable analytical data are necessary to support product content and innovation, health claims, or declaration and specific safety issues. Adequate analytical platforms and methods must be implemented to demonstrate both the compliance and safety assessment of all declared and regulated minerals and trace elements, especially trace-element contaminant surveillance. The first part of this paper presents general information on the mineral composition of infant formula and milk products and their regulatory status. In the second part, a survey describes the main techniques and related current official methods determining minerals and trace elements in infant formula and milk products applied for by various international organizations (AOAC INTERNATIONAL, the International Organization for Standardization, the International Dairy Federation, and the European Committe for Standardization). The third part summarizes method officialization activities by Stakeholder Panels on Infant Formula and Adult Nutritionals and Stakeholder Panel on Strategic Food Analytical Methods. The final part covers a general discussion focusing on analytical gaps and future trends in inorganic analysis that have been applied for in infant formula and milk-based products.

Applying consequential LCA to support energy policy: Land use change effects of bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Vázquez-Rowe, Ian, E-mail: ian.vazquez@tudor.lu; Marvuglia, Antonino; Rege, Sameer; Benetto, Enrico

2014-02-01

Luxembourg aims at complying with the EU objective of attaining a 14% use of bioenergy in the national grid by 2020. The increase of biomethane production from energy crops could be a valuable option in achieving this objective. However, the overall environmental benefit of such option is yet to be proven. Consequential Life Cycle Assessment (CLCA) has shown to be a useful tool to evaluate the environmental suitability of future energy scenarios and policies. The objective of this study was, therefore, to evaluate the environmental consequences of modifying the Luxembourgish agricultural system to increase maize production for biomethane generation. A total of 10 different scenarios were modelled using a partial equilibrium (PE) model to identify changes in land cultivation based on farmers' revenue maximisation, which were then compared to the baseline scenario, i.e. the state of the agricultural sector in 2009. The results were divided into three different consequential decision contexts, presenting differing patterns in terms of land use changes (LUCs) but with minor shifts in environmental impacts. Nevertheless, energy from maize production would imply substantially higher environmental impacts when compared with the current use of natural gas, mainly due to increases in climate change and agricultural land occupation impacts. The results are discussed based on the consequences they may generate on the bioenergy policy, the management of arable land, the changes in import–export flows in Luxembourg and LUCs in the domestic agricultural system. In addition, the specific PE + LCA method presented intends to be of use for other regional studies in which a high level of site-specific data is available. - Highlights: • Partial equilibrium (PE) model created for the agricultural sector in Luxembourg • PE model combined with a consequential LCA approach to support energy policy • The impact of LUCs due to the additional production of maize for energy was

Applying consequential LCA to support energy policy: Land use change effects of bioenergy production

International Nuclear Information System (INIS)

Vázquez-Rowe, Ian; Marvuglia, Antonino; Rege, Sameer; Benetto, Enrico

2014-01-01

Luxembourg aims at complying with the EU objective of attaining a 14% use of bioenergy in the national grid by 2020. The increase of biomethane production from energy crops could be a valuable option in achieving this objective. However, the overall environmental benefit of such option is yet to be proven. Consequential Life Cycle Assessment (CLCA) has shown to be a useful tool to evaluate the environmental suitability of future energy scenarios and policies. The objective of this study was, therefore, to evaluate the environmental consequences of modifying the Luxembourgish agricultural system to increase maize production for biomethane generation. A total of 10 different scenarios were modelled using a partial equilibrium (PE) model to identify changes in land cultivation based on farmers' revenue maximisation, which were then compared to the baseline scenario, i.e. the state of the agricultural sector in 2009. The results were divided into three different consequential decision contexts, presenting differing patterns in terms of land use changes (LUCs) but with minor shifts in environmental impacts. Nevertheless, energy from maize production would imply substantially higher environmental impacts when compared with the current use of natural gas, mainly due to increases in climate change and agricultural land occupation impacts. The results are discussed based on the consequences they may generate on the bioenergy policy, the management of arable land, the changes in import–export flows in Luxembourg and LUCs in the domestic agricultural system. In addition, the specific PE + LCA method presented intends to be of use for other regional studies in which a high level of site-specific data is available. - Highlights: • Partial equilibrium (PE) model created for the agricultural sector in Luxembourg • PE model combined with a consequential LCA approach to support energy policy • The impact of LUCs due to the additional production of maize for energy was

Synthesis of Supported NiPt Bimetallic Nanoparticles, Methods for Controlling the Surface Coverage of Ni Nanoparticles With Pt, Methods Of Making NiPt Multilayer Core-Shell Structures and Application of the Supported Catalysts for CO2 Reforming

KAUST Repository

Li, Lidong; Anjum, Dalaver H.; Zhou, Lu; Laveille, Paco; Basset, Jean-Marie

2015-01-01

Embodiments of the present disclosure provide for supported Ni/Pt bimetallic nanoparticles, compositions including supported NiPt nanoparticles, methods of making supported NiPt nanoparticles, methods of using supported NiPt nanoparticles

A facile method for the preparation of Covalent Triazine Framework coated monoliths as catalyst support - applications in C1 catalysis

KAUST Repository

Bavykina, Anastasiya V.

2017-07-17

A quasi Chemical Vapour Deposition method for the manufacturing of well-defined Covalent Triazine Framework (CTF) coatings on cordierite monoliths is reported. The resulting supported porous organic polymer is an excellent support for the immobilisation of two different homogeneous catalysts: 1) an IrIIICp*-based catalyst for the hydrogen production from formic acid, and 2) a PtII-based for the direct activation of methane via Periana chemistry. The immobilised catalysts display a much higher activity in comparison with the unsupported CTF operated in slurry because of improved mass transport. Our results demonstrate that CTF based catalysts can be further optimised by engineering at different length-scales.

A facile method for the preparation of Covalent Triazine Framework coated monoliths as catalyst support - applications in C1 catalysis

KAUST Repository

Bavykina, Anastasiya V.; Olivos Suarez, Alma Itzel; Osadchii, Dmitrii; Valecha, Rahul; Franz, Robert; Makkee, Michiel; Kapteijn, Freek; Gascon, Jorge

2017-01-01

A quasi Chemical Vapour Deposition method for the manufacturing of well-defined Covalent Triazine Framework (CTF) coatings on cordierite monoliths is reported. The resulting supported porous organic polymer is an excellent support for the immobilisation of two different homogeneous catalysts: 1) an IrIIICp*-based catalyst for the hydrogen production from formic acid, and 2) a PtII-based for the direct activation of methane via Periana chemistry. The immobilised catalysts display a much higher activity in comparison with the unsupported CTF operated in slurry because of improved mass transport. Our results demonstrate that CTF based catalysts can be further optimised by engineering at different length-scales.

Comparison of Online and Traditional Basic Life Support Renewal Training Methods for Registered Professional Nurses.

Science.gov (United States)

Serwetnyk, Tara M; Filmore, Kristi; VonBacho, Stephanie; Cole, Robert; Miterko, Cindy; Smith, Caitlin; Smith, Charlene M

2015-01-01

Basic Life Support certification for nursing staff is achieved through various training methods. This study compared three American Heart Association training methods for nurses seeking Basic Life Support renewal: a traditional classroom approach and two online options. Findings indicate that online methods for Basic Life Support renewal deliver cost and time savings, while maintaining positive learning outcomes, satisfaction, and confidence level of participants.

The utilization of hydroxyapatite-supported CaO-CeO_2 catalyst for biodiesel production

International Nuclear Information System (INIS)

Yan, Beibei; Zhang, Ying; Chen, Guanyi; Shan, Rui; Ma, Wenchao; Liu, Changye

2016-01-01

Highlights: • Hydroxyapatite derived from waste animal bones was served as the support for bimetallic CaO-CeO_2 catalyst. • The 30%CaO-CeO_2/HAP-650 catalyst exhibited excellent performance on biodiesel production. • The yield of FAME was 84.4 % after eight cycles. • Minor leaching concentrations of cerium and calcium species were detected in the product. - Abstract: The study investigated the effect of a bimetallic supported catalyst in biodiesel production. Calcined waste bone derived hydroxyapatite (HAP), a solid waste from animal, was served as the support for CaO-CeO_2 catalyst. Various characterization techniques such as FT-IR, BET, SEM-EDS, CO_2-TPD and XRD analysis were used to analyse the activity of this heterogeneous catalyst. The effect of main parameters in preparation process such as calcination temperature and active component loading on catalyst performance were discussed to obtain the optimal preparation conditions. Under the optimal reaction conditions (11 wt.% dosage of 30%CaO-CeO_2/HAP-650 catalyst and 9:1 methanol to oil molar ratio at 65 °C for 3 h) the highest biodiesel yield of 91.84% was obtained. Stability test indicated that the yield (84.4%) of fatty acid methyl ester was produced after 8 re-used cycles due to the low leaching of catalyst components. The experimental results showed that biodiesel production cost might be lowered while producing relatively high yield at the present of long life-span catalyst.

Products for geoinformation support for spatial planning and management within the framework of the project ONIX

Directory of Open Access Journals (Sweden)

Franc J. Zakrajšek

2000-01-01

Full Text Available The article gives a brief description of four products in the subproject Geoinformation support for physical planning and spatial management on the local level in the framework of the Onix project. The products are a result of a comprehensive approach to the development of information support, whose main features are unified dealing with planning acts, from the statutory plan and development plans to permitting procedures, multi-disciplinary approach and object oriented information approach.

Production of Molybdenum-99 using Neutron Capture Methods

Energy Technology Data Exchange (ETDEWEB)

Toth, James J; Greenwood, Lawrence R; Soderquist, Chuck Z; Wittman, Richard S; Pierson, Bruce D; Burns, Kimberly A; Lavender, Curt A; Painter, Chad L; Love, Edward F; Wall, Donald E

2011-01-01

Pacific Northwest National Laboratory (PNNL), operated by Battelle, has identified a reference process for the production of molybdenum-99 (99Mo) for use in a chromatographic generator to separate the daughter product, technetium-99m (99mTc). The reference process uses the neutron capture reaction of natural or enriched molybdenum oxide via the reaction 98Mo(n,γ)99Mo. The irradiated molybdenum is dissolved in an alkaline solution, whereby the molybdenum, dissolved as the molybdate anion, is loaded on a proprietary ion exchange material in the chromatographic generator. The approach of this investigation is to provide a systematic collection of technologies to make the neutron capture method for Mo-99 production economically viable. This approach would result in the development of a technetium Tc99m generator and a new type of target. The target is comprised of molybdenum, either natural or enriched, and is tailored to the design of currently operating U.S. research reactors. The systematic collection of technologies requires evaluation of new metallurgical methods to produce the target, evaluation of target geometries tailored to research reactors, and chemical methods to dissolve the irradiated target materials for use in a chromatographic generator. A Technical specification for testing the target and neutron capture method in a research reactor is also required. This report includes identification of research and demonstration activities needed to enable deployment of neutron capture production method, including irradiations of prototypic targets, chemical processing of irradiated targets, and loading and extraction tests of Mo99 and Tc99m on the sorbent material in a prototypic generator design. The prototypical generator design is based on the proprietary method and systems for isotope product generation. The proprietary methods and systems described in this report are clearly delineated with footnotes. Ultimately, the Tc-99m generator solution provided by

Hydrocarbon productivities in different Botryococcus strains: comparative methods in product quantification.

Science.gov (United States)

Eroglu, Ela; Okada, Shigeru; Melis, Anastasios

2011-08-01

Six different strains of the green microalgae Botryococcus belonging to the A-race or B-race, accumulating alkadiene or botryococcene hydrocarbons, respectively, were compared for biomass and hydrocarbon productivities. Biomass productivity was assessed gravimetrically upon strain growth in the laboratory under defined conditions. Hydrocarbon productivities were measured by three different and independent experimental approaches, including density equilibrium of the intact cells and micro-colonies, spectrophotometric analysis of hydrocarbon extracts, and gravimetric quantitation of eluted hydrocarbons. All three hydrocarbon-quantitation methods yielded similar results for each of the strains examined. The B-race microalgae Botryococcus braunii var. Showa and Kawaguchi-1 constitutively accumulated botryococcene hydrocarbons equivalent to 30% and 20%, respectively, of their overall biomass. The A-race microalgae Botryococcus braunii, varieties Yamanaka, UTEX 2441 and UTEX LB572 constitutively accumulated alkadiene hydrocarbons ranging from 14% to 13% and 10% of their overall biomass, respectively. Botryococcus sudeticus (UTEX 2629), a morphologically different green microalga, had the lowest hydrocarbon accumulation, equal to about 3% of its overall biomass. Results validate the density equilibrium and spectrophotometric analysis methods in the quantitation of botryococcene-type hydrocarbons. These analytical advances will serve in the screening and selection of B. braunii and of other microalgae in efforts to identify those having a high hydrocarbon content for use in commercial applications.

Numerical Analysis of the Reaction-diffusion Equation for Soluble Starch and Dextrin as Substrates of Immobilized Amyloglucosidase in a Porous Support by Using Least Square Method

Directory of Open Access Journals (Sweden)

Ali Izadi

2015-10-01

Full Text Available In this study, substrates concentration profile has been studied in a porous matrix containing immobilized amyloglucosidase for glucose production. This analysis has been performed by using of an analytical method called Least Square Method and results have been compared with numerical solution. Effects of effective diffusivity (, Michael's constant (, maximum reaction rate ( and initial substrate concentration ( are studied on Soluble Starch and Dextrin concentration in the spherical support. Outcomes reveal that Least Square Method has an excellent agreement with numerical solution and in the center of support, substrate concentration is minimum and increasing of effective diffusivity and Michael's constant reduce the Soluble Starch and Dextrin profile gradient.

Publication Voting Power (PVP): method of finding Evidence-Support

African Journals Online (AJOL)

Background: Extracting the best evidence that support a procedure is a difficult, time consuming task that needs expert statistical knowledge. A way to make weighting evidence more simple and straight for busy clinicians is needed. Methods: The publications about the procedure under question are lined in an ascending ...

Synthesis of Supported NiPt Bimetallic Nanoparticles, Methods for Controlling the Surface Coverage of Ni Nanoparticles With Pt, Methods Of Making NiPt Multilayer Core-Shell Structures and Application of the Supported Catalysts for CO2 Reforming

KAUST Repository

Li, Lidong

2015-06-25

Embodiments of the present disclosure provide for supported Ni/Pt bimetallic nanoparticles, compositions including supported NiPt nanoparticles, methods of making supported NiPt nanoparticles, methods of using supported NiPt nanoparticles, and the like.

Strategies of Production Control as Tools of Efficient Management of Production Enterprises

Science.gov (United States)

Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

2016-03-01

The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

Multi-board concept - a scenario based approach for supporting product quality and life cycle oriented design

DEFF Research Database (Denmark)

Robotham, Antony John; Hertzum, Morten

2000-01-01

This paper will describe the multi-board concept, which is a working approach for supporting life cycle oriented design and product quality. Aspects of this concept include construction of a common working environment where multiple display boards depict scenarios of the product life cycle...... to believe that the multi-board concept promises to be a useful means of communication amongst the design team. We be-lieve that it fosters a thorough understanding of life cycle events, which, in turn, inspires the design of innovative products of the highest quality......., creating a shared quality mindset amongst design-ers, and developing creativity and synthesis in product design. The appropriateness of scenarios for supporting life cycle oriented design will be ar-gued and preliminary results from early experi-mentation will be presented.Initial results lead us...

Evaluation of Statistical Methods for Modeling Historical Resource Production and Forecasting

Science.gov (United States)

Nanzad, Bolorchimeg

This master's thesis project consists of two parts. Part I of the project compares modeling of historical resource production and forecasting of future production trends using the logit/probit transform advocated by Rutledge (2011) with conventional Hubbert curve fitting, using global coal production as a case study. The conventional Hubbert/Gaussian method fits a curve to historical production data whereas a logit/probit transform uses a linear fit to a subset of transformed production data. Within the errors and limitations inherent in this type of statistical modeling, these methods provide comparable results. That is, despite that apparent goodness-of-fit achievable using the Logit/Probit methodology, neither approach provides a significant advantage over the other in either explaining the observed data or in making future projections. For mature production regions, those that have already substantially passed peak production, results obtained by either method are closely comparable and reasonable, and estimates of ultimately recoverable resources obtained by either method are consistent with geologically estimated reserves. In contrast, for immature regions, estimates of ultimately recoverable resources generated by either of these alternative methods are unstable and thus, need to be used with caution. Although the logit/probit transform generates high quality-of-fit correspondence with historical production data, this approach provides no new information compared to conventional Gaussian or Hubbert-type models and may have the effect of masking the noise and/or instability in the data and the derived fits. In particular, production forecasts for immature or marginally mature production systems based on either method need to be regarded with considerable caution. Part II of the project investigates the utility of a novel alternative method for multicyclic Hubbert modeling tentatively termed "cycle-jumping" wherein overlap of multiple cycles is limited. The

The LHC Cryomagnet Supports in Glass-Fiber Reinforced Epoxy A Large Scale Industrial Production with High Reproducibility in Performance

CERN Document Server

Poncet, A; Trigo, J; Parma, V

2008-01-01

The about 1700 LHC main ring super-conducting magnets are supported within their cryostats on 4700 low heat in leak column-type supports. The supports were designed to ensure a precise and stable positioning of the heavy dipole and quadrupole magnets while keeping thermal conduction heat loads within budget. A trade-off between mechanical and thermal properties, as well as cost considerations, led to the choice of glass fibre reinforced epoxy (GFRE). Resin Transfer Moulding (RTM), featuring a high level of automation and control, was the manufacturing process retained to ensure the reproducibility of the performance of the supports throughout the large production. The Spanish aerospace company EADS-CASA Espacio developed the specific RTM process, and produced the total quantity of supports between 2001 and 2004. This paper describes the development and the production of the supports, and presents the production experience and the achieved performance.

THE LHC CRYOMAGNET SUPPORTS IN GLASS-FIBER REINFORCED EPOXY: A LARGE SCALE INDUSTRIAL PRODUCTION WITH HIGH REPRODUCIBILITY IN PERFORMANCE

International Nuclear Information System (INIS)

Poncet, A.; Struik, M.; Parma, V.; Trigo, J.

2008-01-01

The about 1700 LHC main ring super-conducting magnets are supported within their cryostats on 4700 low heat in leak column-type supports. The supports were designed to ensure a precise and stable positioning of the heavy dipole and quadrupole magnets while keeping thermal conduction heat loads within budget. A trade-off between mechanical and thermal properties, as well as cost considerations, led to the choice of glass fibre reinforced epoxy (GFRE). Resin Transfer Moulding (RTM), featuring a high level of automation and control, was the manufacturing process retained to ensure the reproducibility of the performance of the supports throughout the large production.The Spanish aerospace company EADS-CASA Espacio developed the specific RTM process, and produced the total quantity of supports between 2001 and 2004.This paper describes the development and the production of the supports, and presents the production experience and the achieved performance

Therapy Decision Support Based on Recommender System Methods.

Science.gov (United States)

Gräßer, Felix; Beckert, Stefanie; Küster, Denise; Schmitt, Jochen; Abraham, Susanne; Malberg, Hagen; Zaunseder, Sebastian

2017-01-01

We present a system for data-driven therapy decision support based on techniques from the field of recommender systems. Two methods for therapy recommendation, namely, Collaborative Recommender and Demographic-based Recommender , are proposed. Both algorithms aim to predict the individual response to different therapy options using diverse patient data and recommend the therapy which is assumed to provide the best outcome for a specific patient and time, that is, consultation. The proposed methods are evaluated using a clinical database incorporating patients suffering from the autoimmune skin disease psoriasis. The Collaborative Recommender proves to generate both better outcome predictions and recommendation quality. However, due to sparsity in the data, this approach cannot provide recommendations for the entire database. In contrast, the Demographic-based Recommender performs worse on average but covers more consultations. Consequently, both methods profit from a combination into an overall recommender system.

Experiences in Interagency and International Interfaces for Mission Support

Science.gov (United States)

Dell, G. T.; Mitchell, W. J.; Thompson, T. W.; Cappellari, J. O., Jr.; Flores-Amaya, F.

1996-01-01

The Flight Dynamics Division (FDD) of the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GFSC) provides extensive support and products for Space Shuttle missions, expendable launch vehicle launches, and routine on-orbit operations for a variety of spacecraft. A major challenge in providing support for these missions is defining and generating the products required for mission support and developing the method by which these products are exchanged between supporting agencies. As interagency and international cooperation has increased in the space community, the FDD customer base has grown and with it the number and variety of external interfaces and product definitions. Currently, the FDD has working interfaces with the NASA Space and Ground Networks, the Johnson Space Center, the White Sands Complex, the Jet propulsion Laboratory (including the Deep Space Network), the United States Air Force, the Centre National d'Etudes Spatiales, the German Spaceflight Operations Center, the European Space Agency, and the National Space Development Agency of Japan. With the increasing spectrum of possible data product definitions and delivery methods, the FDD is using its extensive interagency experience to improve its support of established customers and to provide leadership in adapting/developing new interfaces. This paper describes the evolution of the interfaces between the FDD and its customers, discusses many of the joint activities ith these customers, and summarizes key lessons learned that can be applied to current and future support.

A QFD-based optimization method for a scalable product platform

Science.gov (United States)

Luo, Xinggang; Tang, Jiafu; Kwong, C. K.

2010-02-01

In order to incorporate the customer into the early phase of the product development cycle and to better satisfy customers' requirements, this article adopts quality function deployment (QFD) for optimal design of a scalable product platform. A five-step QFD-based method is proposed to determine the optimal values for platform engineering characteristics (ECs) and non-platform ECs of the products within a product family. First of all, the houses of quality (HoQs) for all product variants are developed and a QFD-based optimization approach is used to determine the optimal ECs for each product variant. Sensitivity analysis is performed for each EC with respect to overall customer satisfaction (OCS). Based on the obtained sensitivity indices of ECs, a mathematical model is established to simultaneously optimize the values of the platform and the non-platform ECs. Finally, by comparing and analysing the optimal solutions with different number of platform ECs, the ECs with which the worst OCS loss can be avoided are selected as platform ECs. An illustrative example is used to demonstrate the feasibility of this method. A comparison between the proposed method and a two-step approach is conducted on the example. The comparison shows that, as a kind of single-stage approach, the proposed method yields better average degree of customer satisfaction due to the simultaneous optimization of platform and non-platform ECs.

Large urban projects and social actors : Forces supporting and opposing the production

NARCIS (Netherlands)

Cuenya, B.E.

2006-01-01

This research studies, by means of the analysis of a paradigmatic large urban project in Buenos Aires, the production process of a large urban project furthered by the State and directed to create a new centrality. The analysis is focused on the forces supporting and opposition the project that were

Regulatory/Scientific Supports for Micro-, Small-, and Medium-Sized Enterprises (SMEs) With Medicinal Products Provided by the PMDA and EMA.

Science.gov (United States)

Kondo, Hideyuki; Shibatsuji, Masayoshi; Yasuda, Naoyuki

2018-01-01

Micro-, small-, and medium-sized enterprises (SMEs) have been considered as key players who can bring innovative medicinal products and/or technologies into the field. However, they may need much regulatory/scientific supports to provide their products, technologies, or services to the market in a timely way. Both the Pharmaceuticals and Medical Devices Agency (PMDA) and the European Medicines Agency (EMA), regulatory authorities for medicinal products in Japan and the EU, respectively, have prepared supportive measures for SMEs from the early phase of product/technology development to the postmarketing phase. With respect to supports for SMEs, both agencies have provided similar SME-specific supportive activities, including routine administrative assistance, consultations about product development strategy from an early phase, as well as specific regulatory/scientific issues and fee incentives. In addition, there is a system to register SME status in the EU, which can be a tool for regulators to know how much potential SME-driven activities have and with whom they should communicate to provide necessary supports. Furthermore, as new technologies and novel products from SMEs are not limited to the region where they are developed, close communication about these topics between the PMDA and the EMA will contribute to advancing patients' access to necessary medicinal products.

Accounting support for employees' motivation as a method of increasing the effective activity of the enterprise

Directory of Open Access Journals (Sweden)

Samchuk K.I.

2017-06-01

Full Text Available The article analyzes the evolution of scientific perspectives on personnel motivation, defines the concept of "motivation" in economic and legal dictionaries and in educational and methodological literature. The theory of motivation and analytical models of motivation have been investigated, in order to reflect the multifaceted and non-standard nature of the process of motivation and to determine the need for an integrated approach to solving this complex problem. The article presents the grouped motivational types, their characteristics, and the possibilities of organizational support. The classification and content of methods of motivation and stimulation of labor at enterprises, namely: economic, administrative, organizational, production, moral, psychological, social, are given.

The mass balance of production and consumption: Supporting policy-makers for aquatic food security

Science.gov (United States)

Lopes, A. S.; Ferreira, J. G.; Vale, C.; Johansen, J.

2017-03-01

This work addresses divergences between data on consumption and availability for wild-caught and farmed fish, and normalisation of reported production data, to support integrated fisheries and aquaculture management. The methodologies developed, centred on improved parameterisation and on mass balance closure, were tested in two case studies: (i) the cod fishery in Europe, with particular emphasis on Iceland and the United Kingdom; and (ii) the overall balance of aquatic products for Portugal, the ICES member with the most diverse range of landed marine species. Data for consumption, Illegal, Unreported, or Unregulated (IUU) catch, and official availability statistics were used to identify discrepancies between consumption and official availability data. The identification of discrepancies between supply and demand, when coupled with source-discriminated data, showed a pattern where products with no unmet demand tend to display a considerable IUU percentage-above 9% in three cases (hake, sardine, and horse mackerel). By contrast with fished products with an over-met demand such as cod (144%) and sardine (124%), farmed species display low Optimal Consumption Level (OCL) satisfaction. Atlantic salmon, gilthead seabream, and European seabass register 45%, 58% and 44% respectively; this suggests a considerable unmet demand for these products and/or a high volume of undeclared fish reaching consumers, which may be due to the lack of landings control that exists for wild-caught fish. Improvements to production estimates using live-weight coefficients illustrate the impacts of seafood processing. Different processing methods can generate variations in live-weight estimates, leading to errors in officially reported data, and expose the limitations of the current statistical methods. As an example, the corrected per capita consumption for Portugal for 2014 (the latest FAO data) increases from 57 to 66 kg ind-1 y-1, which places the country as the second-greatest consumer in

Dual linear structured support vector machine tracking method via scale correlation filter

Science.gov (United States)

Li, Weisheng; Chen, Yanquan; Xiao, Bin; Feng, Chen

2018-01-01

Adaptive tracking-by-detection methods based on structured support vector machine (SVM) performed well on recent visual tracking benchmarks. However, these methods did not adopt an effective strategy of object scale estimation, which limits the overall tracking performance. We present a tracking method based on a dual linear structured support vector machine (DLSSVM) with a discriminative scale correlation filter. The collaborative tracker comprised of a DLSSVM model and a scale correlation filter obtains good results in tracking target position and scale estimation. The fast Fourier transform is applied for detection. Extensive experiments show that our tracking approach outperforms many popular top-ranking trackers. On a benchmark including 100 challenging video sequences, the average precision of the proposed method is 82.8%.

Methods for production of proteins in host cells

Science.gov (United States)

Donnelly, Mark; Joachimiak, Andrzej

2004-01-13

The present invention provides methods for the production of proteins, particularly toxic proteins, in host cells. The invention provides methods which use a fusion protein comprising a chaperonin binding domain in host cells induced or regulated to have increased levels of chaperonin which binds the chaperonin binding domain.

Validation of spectral methods for the seismic analysis of multi-supported structures

International Nuclear Information System (INIS)

Viola, B.

1999-01-01

There are many methodologies for the seismic analysis of buildings. When a seism occurs, structures such piping systems in nuclear power plants are subjected to motions that may be different at each support point. Therefore it is necessary to develop methods that take into account the multi-supported effect. In a first time, a bibliography analysis on the different methods that exist has been carried out. The aim was to find a particular method applicable to the study of piping systems. The second step of this work consisted in developing a program that may be used to test and make comparisons on different selected methods. So spectral methods have the advantage to give an estimation of the maximum values for strain in the structure, in reduced calculation time. The time history analysis is used as the reference for the tests. (author)

State and perspectives of methodological support of materials research of products from Zirconium alloys for fuel rods and fuel assemblies of VVER

International Nuclear Information System (INIS)

Gusev, A.; Markelov, V.; Novikov, V.; Zheltkovskaya, T.; Malgin, A.; Shevyakov, A.; Bekrenev, S.

2015-01-01

The basic methodological framework for the study of the characteristics of zirconium products was created in JSC «VNIINM». The reliability of experiments confirmed the results of metrological certification procedures. Further development of methodological support of «VNIINM» for Zr products research is the development and validation of methods to determine: mechanical characteristics under internal pressure; Determination of Contractile Strain Ratio (CSR); Expansion Due to Compression (EDC); Plane Strain Tensile (PST); characteristics of resistance multi-cycle and low-cyclic fatigue; texture parameters using the orientation distribution function; the electrical characteristics of the oxide film by impedance

The IAEA activities supporting implementation of best practice in uranium production cycle

International Nuclear Information System (INIS)

Slezak, J.

2010-01-01

'Full text:' Since the International Atomic Energy Agency's foundation in 1957, the Agency has had an increasing interest in uranium production cycle (UPC) developments. Recent activities cover tasks on uranium geology & deposits, exploration, mining & processing including environmental issues. The two projects titles are (1) Updating uranium resources, supply and demand and nuclear fuel cycle databases and (2) Supporting good practices in the UPC in particular for new countries. Based o the recent experience, one of the new activities is focused at human resources development to improve application of best practice called Uranium Production Cycle Network (UPNet). (author)

Therapy Decision Support Based on Recommender System Methods

Directory of Open Access Journals (Sweden)

Felix Gräßer

2017-01-01

Full Text Available We present a system for data-driven therapy decision support based on techniques from the field of recommender systems. Two methods for therapy recommendation, namely, Collaborative Recommender and Demographic-based Recommender, are proposed. Both algorithms aim to predict the individual response to different therapy options using diverse patient data and recommend the therapy which is assumed to provide the best outcome for a specific patient and time, that is, consultation. The proposed methods are evaluated using a clinical database incorporating patients suffering from the autoimmune skin disease psoriasis. The Collaborative Recommender proves to generate both better outcome predictions and recommendation quality. However, due to sparsity in the data, this approach cannot provide recommendations for the entire database. In contrast, the Demographic-based Recommender performs worse on average but covers more consultations. Consequently, both methods profit from a combination into an overall recommender system.

A support-operator method for 3-D rupture dynamics

Science.gov (United States)

Ely, Geoffrey P.; Day, Steven M.; Minster, Jean-Bernard

2009-06-01

We present a numerical method to simulate spontaneous shear crack propagation within a heterogeneous, 3-D, viscoelastic medium. Wave motions are computed on a logically rectangular hexahedral mesh, using the generalized finite-difference method of Support Operators (SOM). This approach enables modelling of non-planar surfaces and non-planar fault ruptures. Our implementation, the Support Operator Rupture Dynamics (SORD) code, is highly scalable, enabling large-scale, multiprocessors calculations. The fault surface is modelled by coupled double nodes, where rupture occurs as dictated by the local stress conditions and a frictional failure law. The method successfully performs test problems developed for the Southern California Earthquake Center (SCEC)/U.S. Geological Survey (USGS) dynamic earthquake rupture code validation exercise, showing good agreement with semi-analytical boundary integral method results. We undertake further dynamic rupture tests to quantify numerical errors introduced by shear deformations to the hexahedral mesh. We generate a family of meshes distorted by simple shearing, in the along-strike direction, up to a maximum of 73°. For SCEC/USGS validation problem number 3, grid-induced errors increase with mesh shear angle, with the logarithm of error approximately proportional to angle over the range tested. At 73°, rms misfits are about 10 per cent for peak slip rate, and 0.5 per cent for both rupture time and total slip, indicating that the method (which, up to now, we have applied mainly to near-vertical strike-slip faulting) is also capable of handling geometries appropriate to low-angle surface-rupturing thrust earthquakes. Additionally, we demonstrate non-planar rupture effects, by modifying the test geometry to include, respectively, cylindrical curvature and sharp kinks.

Calculation of isotopic mass and energy production by a matrix operator method

International Nuclear Information System (INIS)

Lee, C.E.

1976-08-01

The Volterra method of the multiplicative integral is used to determine the isotopic density, mass, and energy production in linear systems. The solution method, assumptions, and limitations are discussed. The method allows a rapid accurate calculation of the change in isotopic density, mass, and energy production independent of the magnitude of the time steps, production or decay rates, or flux levels

Bayreuth Productivity Analysis-a method for ascertaining and improving the holistic service productivity of acute care hospitals.

Science.gov (United States)

Pfannstiel, Mario Alexander

2016-01-01

The healthcare sector is lacking a method with which hospitals can measure the extent to which they achieve their goals in terms of aggregate productivity from both patients' and employees' perspectives. The Bayreuth Productivity Analysis (BPA) provides a solution to this problem because it uses two standardized questionnaires-one for patients and one for employees-to ascertain productivity at hospitals. These questionnaires were developed in several steps according to the principles of classical test theory, and they consist of six dimensions (information, organization, climate, methods, infrastructure and equipment) of five items each. One item describes a factual situation relevant to productivity and services so that it makes a contribution to the overall productivity of a hospital. After individualized evaluation of these items, the dimensions are subjectively weighted in the two questionnaires. The productivity index thus ascertained can be considered "holistic" when all patients and employees in a hospital make a differentiated assessment and weigh off each of the dimensions. In conclusion, the BPA constitutes a simple yet practicable method to ascertain and improve the holistic service productivity of hospitals. Copyright © 2014 John Wiley & Sons, Ltd.

Grasping devices and methods in automated production processes

DEFF Research Database (Denmark)

Fantoni, Gualtiero; Santochi, Marco; Dini, Gino

2014-01-01

assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes. (C......In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications...

STRATEGIES OF PRODUCTION CONTROL AS TOOLS OF EFFICIENT MANAGEMENT OF PRODUCTION ENTERPRISES

Directory of Open Access Journals (Sweden)

Mateusz BUDYNEK

2016-01-01

Full Text Available The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits re-sulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

Changeability of consumer preferences concerning the methods of fruit production

Directory of Open Access Journals (Sweden)

Eugenia Czernyszewicz

2009-01-01

Full Text Available The purpose of the paper was to establish and compare consumer preferences concerning the methods of fruit production (traditional or organic ones in the years 2001, 2003 and 2006 and the relations between the preferences and the socio-economic and demographic features of the consumers. The analysis was conducted on the basis of the data from surveys carried out among the inhabitants of Lublin. Results of those surveys point out that certain features of the consumers such as the sex, incomes and the family type significantly differentiated preferences concerning the method of fruit production. Increased incomes were connected with greater acceptance of the organic method, and their decrease was related to greater frequency of indicating the conventional method. Interest in the method of production, while buying the fruit was significantly higher among men than among women. Declaring the willingness to pay more for organic fruit was also correlated with the consumers’ sex. Besides, in 2006 it was not too strongly related to the incomes of the respondents. In the years 2001 and 2006 changeability of preferences con-cerning the willingness to pay a higher price for organic fruit and no change in the interest in the technology of fruit production while purchasing the fruit were shown.

Methods to estimate the transfer of contaminants into recycling products - A case study from Austria.

Science.gov (United States)

Knapp, Julika; Allesch, Astrid; Müller, Wolfgang; Bockreis, Anke

2017-11-01

Recycling of waste materials is desirable to reduce the consumption of limited primary resources, but also includes the risk of recycling unwanted, hazardous substances. In Austria, the legal framework demands secondary products must not present a higher risk than comparable products derived from primary resources. However, the act provides no definition on how to assess this risk potential. This paper describes the development of different quantitative and qualitative methods to estimate the transfer of contaminants in recycling processes. The quantitative methods comprise the comparison of concentrations of harmful substances in recycling products to corresponding primary products and to existing limit values. The developed evaluation matrix, which considers further aspects, allows for the assessment of the qualitative risk potential. The results show that, depending on the assessed waste fraction, particular contaminants can be critical. Their concentrations were higher than in comparable primary materials and did not comply with existing limit values. On the other hand, the results show that a long-term, well-established quality control system can assure compliance with the limit values. The results of the qualitative assessment obtained with the evaluation matrix support the results of the quantitative assessment. Therefore, the evaluation matrix can be suitable to quickly screen waste streams used for recycling to estimate their potential environmental and health risks. To prevent the transfer of contaminants into product cycles, improved data of relevant substances in secondary resources are necessary. In addition, regulations for material recycling are required to assure adequate quality control measures, including limit values. Copyright © 2017 Elsevier Ltd. All rights reserved.

CALS and the Product State Model - Methodology and Supporting Schools and Paradigms

DEFF Research Database (Denmark)

Larsen, Michael Holm

1998-01-01

incorporates relevant information about each stage of the production process.The paper will describe the research object, the model object and discuss a part of the methodology in developing a Product State Model. The project is primarily technological, however, organisational and human aspects......This paper address the preliminary considerations in a research project, initiated February 1997, regarding Continuous Acquisition and Life-cycle Support (CALS) which is a part of the activities in CALS Center Denmark. The CALS concept is presented focusing on the Product State Model (PSM). The PSM...... will be developed upon, will be discussed. Also, the parameters for evaluating the PSM will be considered. In establishing the theoretical body of knowledge with respect to CALS, an identification of schools and paradigms within the research area of applying information technology in a manufacturing environment...

MODIFICATION OF THE SPAR-H METHOD TO SUPPORT HRA FOR LEVEL 2 PSA

Energy Technology Data Exchange (ETDEWEB)

St. Germain, S.; Boring, R.; Banaseanu, G.; Akl, Y.; Xu, M.

2016-10-01

Currently, available Human Reliability Analysis (HRA) methods were generally developed to support Level 1 Probabilistic Safety Analysis (PSA) models. There has been an increased emphasis placed on Level 2 PSA in recent years; however, the currently used HRA methods are not ideal for this application, including the SPAR-H method. Challenges that will likely be present during a severe accident such as degraded or hazardous operating conditions, shift in control from the main control room to the technical support center, unavailability of instrumentation, and others are not routinely considered for Level 1 HRA analysis. These factors combine to create a much more uncertain condition to be accounted for in the HRA analysis. While the SPAR-H shaping factors were established to support Level 1 HRA, previous studies have shown it may be used for Level 2 HRA analysis as well. The Canadian Nuclear Safety Commission (CNSC) and Idaho National Laboratory (INL) in a joint project are investigating modifications to the SPAR-H method to create more consistency in applying the performance shaping factors used in the method for Level 2 analysis.

Identification of critical timeconsuming student support activities in e-learning

Directory of Open Access Journals (Sweden)

Fred J. de Vries

2005-12-01

Full Text Available Higher education staff involved in e-learning often struggle with organising their student support activities. To a large extent this is due to the high workload involved with such activities. We distinguish support related to learning content, learning processes and student products. At two different educational institutions, surveys were conducted to identify the most critical support activities, using the Nominal Group Method. The results are discussed and brought to bear on the distinction between content-related, process-related and product-related support activities.

Supported Lead in Pb-210 Chronology

Energy Technology Data Exchange (ETDEWEB)

Pittauerova, D.; Hettwig, B.; Fischer, H. W. [Institute of Environmental Physics, University of Bremen, Bremen (Germany)

2013-07-15

A widely applied method of supported lead estimation in sediments using gamma spectrometric {sup 226}Ra determination via {sup 222}Rn short lived daughter products relies on radioactive equilibrium between {sup 226}Ra and {sup 222}Rn being established after sealing the samples. Advantages and disadvantages of methods of {sup 226}Ra estimation in sediments, using either {sup 222}Rn daughter products or direct estimation by 186.2 keV gamma emissions are discussed. An equilibrium experiment was performed using test samples and in one case radioactive equilibrium was not reached. On a theoretical sediment profile it was shown how systematic errors in supported {sup 210}Pb estimation can lead to incorrect interpretations of {sup 210}Pb{sub xs} profiles and therefore affect {sup 210}Pb derived chronologies. (author)

The current state of Bayesian methods in medical product development: survey results and recommendations from the DIA Bayesian Scientific Working Group.

Science.gov (United States)

Natanegara, Fanni; Neuenschwander, Beat; Seaman, John W; Kinnersley, Nelson; Heilmann, Cory R; Ohlssen, David; Rochester, George

2014-01-01

Bayesian applications in medical product development have recently gained popularity. Despite many advances in Bayesian methodology and computations, increase in application across the various areas of medical product development has been modest. The DIA Bayesian Scientific Working Group (BSWG), which includes representatives from industry, regulatory agencies, and academia, has adopted the vision to ensure Bayesian methods are well understood, accepted more broadly, and appropriately utilized to improve decision making and enhance patient outcomes. As Bayesian applications in medical product development are wide ranging, several sub-teams were formed to focus on various topics such as patient safety, non-inferiority, prior specification, comparative effectiveness, joint modeling, program-wide decision making, analytical tools, and education. The focus of this paper is on the recent effort of the BSWG Education sub-team to administer a Bayesian survey to statisticians across 17 organizations involved in medical product development. We summarize results of this survey, from which we provide recommendations on how to accelerate progress in Bayesian applications throughout medical product development. The survey results support findings from the literature and provide additional insight on regulatory acceptance of Bayesian methods and information on the need for a Bayesian infrastructure within an organization. The survey findings support the claim that only modest progress in areas of education and implementation has been made recently, despite substantial progress in Bayesian statistical research and software availability. Copyright © 2013 John Wiley & Sons, Ltd.

Prospects for the methods of radionuclide production

International Nuclear Information System (INIS)

Karamyan, S.A.; Dmitriev, S.N.

2014-01-01

Methods of radionuclide production for the nuclear-medicine purposes are described. In a budget approach, the application of low-energy accelerators is especially advantageous. Intense flux of bremsstrahlung at electron accelerators or high-current cyclotron beams of alpha particles must supply a great yield for many isotopes. The choice of a target material and of the projectile energy provides enough variation for concrete species formation. The innovating procedures are here proposed for optimizing of methods, for instance, application of the noble-gas target for production and transport of activities. The known and new variants of the 'generator' scheme are discussed. Many isotopes are listed as promising in the context of the therapeutic and theragnostic applications. Among them are isotopes/isomers emitting soft radiation for the selective and careful body treatment, also the positron emitters for PET, and the halogen and alkali-metal species convenient for chemical separation.

A decision support system for planning biomass-based energy production

Energy Technology Data Exchange (ETDEWEB)

Frombo, Francesco; Robba, Michela [DIST, Department of Communication, Computer and System Sciences, University of Genoa, Via Opera Pia 13, 16145 Genova (Italy); Renewable Energy Laboratory, Modelling and Optimization, Via A. Magliotto 2, 17100 Savona (Italy); Minciardi, Riccardo; Sacile, Roberto [DIST, Department of Communication, Computer and System Sciences, University of Genoa, Via Opera Pia 13, 16145 Genova (Italy)

2009-03-15

Environmental decision support systems (EDSS) are recognized as valuable tools for environmental planning and management. In this paper, a geographic information system (GIS)-based EDSS for the optimal planning of forest biomass use for energy production is presented. A user-friendly interface allows the creation of Scenarios and the running of the developed decision and environmental models. In particular, the optimization model regards decisions over a long-term period (e.g. years) and includes decision variables related to plant locations, conversion processes (pyrolisis, gasification, combustion), harvested biomass. Moreover, different energy products and different definitions of the harvesting and pre-treatment operations are taken into account. The correct management of the forest is considered through specific constraints, security factors, and procedures for parcel selection. The EDSS features and capabilities are described in detail, with specific reference to a case study. Discussion and further research are reported. (author)

Chemometric methods and near-infrared spectroscopy applied to bioenergy production

International Nuclear Information System (INIS)

Liebmann, B.

2010-01-01

The present work examines bioenergy production from different viewpoints. The three main objectives are: (1) to reveal the relation of technology, sustainability and economy in bioenergy processes; (2) to investigate spectroscopic methods as a tool for analytical monitoring of bioenergy processes; and (3) to develop new chemometric methods for advanced analysis of spectroscopic data. At the first stage, this thesis investigates the technological, ecological, and economic features of renewable-resource-based and de-centralized bioenergy production systems. In different scenarios, small-scale bioethanol production is combined with other technologies that provide renewable energy from residuals of the bioethanol process. The general aim is to substitute fossil energy conventionally used within the bioethanol process. The investigated technologies are biogas production and straw incineration. Agricultural aspects are introduced by sustainable crop rotation concepts that reconcile food, feed, and biofuel production. The sustainability of small-scale bioethanol production in the different scenarios is quantified by an ecological footprint method, the sustainable process index, SPI, and compared to conventional fuels. The main findings are: (i) small-scaled bioethanol production can be operated with 100 % renewable energy supply, (ii) the SPI of bioethanol can be reduced up to 92 % compared to conventional fuels, (iii) a complex trade-off between ecology-of-scale and economy-of-scale is necessary. At the second stage, this thesis approaches bioenergy production processes from an analytical perspective, and presents near-infrared spectroscopy (NIR) as promising method for fast process monitoring of bioethanol production and biomass characterization. In addition, new analytical methods are presented for a fast determination of the heating value of solid biomass fuel, based on IR and NIR spectroscopy. The main findings are that NIR spectroscopy and appropriate chemometric

Peer support of a faculty "writers' circle" increases confidence and productivity in generating scholarship.

Science.gov (United States)

Brandon, Catherine; Jamadar, David; Girish, Gandikota; Dong, Qian; Morag, Yoav; Mullan, Patricia

2015-04-01

Publishing is critical for academic medicine career advancement. Rejection of manuscripts can be demoralizing. Obstacles faced by clinical faculty may include lack of time, confidence, and optimal writing practices. This study describes the development and evaluation of a peer-writing group, informed by theory and research on faculty development and writing. Five clinical-track radiology faculty members formed a "Writers' Circle" to promote scholarly productivity and reflection on writing practices. Members decided to work with previously rejected manuscripts. After members' initial meeting, interactions were informal, face to face during clinical work, and online. After the first 6 months, an anonymous survey asked members about the status of articles and evaluations of the writing group. Ten previously rejected articles, at least one from each member, were submitted to the Circle. In 6 months, four manuscripts were accepted for publication, five were in active revision, and one was withdrawn. All participants (100%) characterized the program as worth their time, increasing their motivation to write, their opportunities to support scholarly productivity of colleagues, and their confidence in generating scholarship. Peer-support writing groups can facilitate the pooling of expertise and the exchange of recommended writing practices. Our peer-support group increased scholarly productivity and provided a collegial approach to academic writing. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

Compound cast product and method for producing a compound cast product

Science.gov (United States)

Meyer, Thomas N.; Viswanathan, Srinath

2002-09-17

A compound cast product is formed in a casting mold (14) having a mold cavity (16) sized and shaped to form the cast product. A plurality of injectors (24) is supported from a bottom side (26) of the casting mold (14). The injectors (24) are in fluid communication with the mold cavity (16) through the bottom side (26) of the casting mold (14). A molten material holder furnace (12) is located beneath the casting mold (14). The holder furnace (12) defines molten material receiving chambers (36) configured to separately contain supplies of two different molten materials (37, 38). The holder furnace (12) is positioned such that the injectors (24) extend downward into the receiving chamber (36). The receiving chamber (36) is separated into at least two different flow circuits (51, 52). A first molten material (37) is received in a first flow circuit (51), and a second molten material (38) is received into a second flow circuit (52). The first and second molten materials (37, 38) are injected into the mold cavity (16) by the injectors (24) acting against the force of gravity. The injectors (24) are positioned such that the first and second molten materials (37, 38) are injected into different areas of the mold cavity (16). The molten materials (37, 38) are allowed to solidify and the resulting compound cast product is removed from the mold cavity (16).

Cost Decision Support in Product Design

NARCIS (Netherlands)

Liebers, A.; Kals, H.J.J.

1997-01-01

The constraints addressed in decision making during product design, process planning and production planning determine the admissible solution space for the manufacture of products. The solution space determines largely the costs that are incurred in the production process. In order to be able to

Geographic proximity to coal plants and U.S. public support for extending the Production Tax Credit

International Nuclear Information System (INIS)

Goldfarb, Jillian L.; Buessing, Marric; Kriner, Douglas L.

2016-01-01

The Production Tax Credit (PTC) is an important policy instrument through which the federal government promotes renewable energy development in the United States. However, the efficacy of the PTC is hampered by repeated expirations and short-term extensions, and by the general uncertainty surrounding its future status. We examine the factors driving variation in public support for the extension of the PTC using a nationally representative, internet-based survey. Americans living near a coal-fired power plant are significantly more likely to support extending the PTC than are their peers who are more insulated from the externalities of burning coal. The evidence for this dynamic was strongest and most statistically significant among subjects experimentally primed to think about the adverse health effects of burning coal. Raising awareness of the public health ramifications of generating electricity from fossil fuels holds the potential to increase support for renewable energy policies among those living in proximity to coal plants, even in a highly politicized policy debate. - Highlights: • Proximity to coal power plant increases support for Production Tax Credit. • Attitudes toward global warming influence support for PTC. • Raising awareness of health threat increases PTC support if living near coal plant.

Analysis Method for Integrating Components of Product

Energy Technology Data Exchange (ETDEWEB)

Choi, Jun Ho [Inzest Co. Ltd, Seoul (Korea, Republic of); Lee, Kun Sang [Kookmin Univ., Seoul (Korea, Republic of)

2017-04-15

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Analysis Method for Integrating Components of Product

International Nuclear Information System (INIS)

Choi, Jun Ho; Lee, Kun Sang

2017-01-01

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Matrix-product-state method with local basis optimization for nonequilibrium electron-phonon systems

Science.gov (United States)

Heidrich-Meisner, Fabian; Brockt, Christoph; Dorfner, Florian; Vidmar, Lev; Jeckelmann, Eric

We present a method for simulating the time evolution of quasi-one-dimensional correlated systems with strongly fluctuating bosonic degrees of freedom (e.g., phonons) using matrix product states. For this purpose we combine the time-evolving block decimation (TEBD) algorithm with a local basis optimization (LBO) approach. We discuss the performance of our approach in comparison to TEBD with a bare boson basis, exact diagonalization, and diagonalization in a limited functional space. TEBD with LBO can reduce the computational cost by orders of magnitude when boson fluctuations are large and thus it allows one to investigate problems that are out of reach of other approaches. First, we test our method on the non-equilibrium dynamics of a Holstein polaron and show that it allows us to study the regime of strong electron-phonon coupling. Second, the method is applied to the scattering of an electronic wave packet off a region with electron-phonon coupling. Our study reveals a rich physics including transient self-trapping and dissipation. Supported by Deutsche Forschungsgemeinschaft (DFG) via FOR 1807.

Concept of an immersive assistance system with augmented reality for the support of manual activities in radioactive production environments

International Nuclear Information System (INIS)

Eursch, Andreas A.

2010-01-01

The thesis on an immersive assistance system concept with augmented reality for the support of manual activities in radioactive production environments covers the following topics: analysis of the situation: production and use of radioactive materials, problem analysis of the work in the production facilities, necessity of manual activities, automation, prediction in hot cells; status of research and development; assistance system concept, immersive camera system; augmented reality support in hot cells; economic evaluation and generalization.

The model and the planning method of volume and variety assessment of innovative products in an industrial enterprise

Science.gov (United States)

Anisimov, V. G.; Anisimov, E. G.; Saurenko, T. N.; Sonkin, M. A.

2017-01-01

In the long term, the innovative development strategy efficiency is considered as the most crucial condition for assurance of economic system competitiveness in market conditions. It determines the problem relevance of such justification strategies with regard to specific systems features and conditions of their operation. The problem solution for industrial enterprises can be based on mathematical models of supporting the decision-making on the elements of the innovative manufacturing program. An optimization model and the planning method of innovative products volume and variety are suggested. The feature of the suggested model lies in the nonlinear nature of the objective function. It allows taking into consideration the law of diminishing marginal utility. The suggested method of optimization takes into account the system features and enables the effective implementation of manufacturing capabilities in modern conditions of production organization and sales in terms of market saturation.

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

OpenAIRE

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof, compressing, heating in an inert environment until an exothermic reaction is initiated and cooling. It has been shown that when the grain refiner thus prepared is applied, the quality of cast products ...

Methods to assess secondary volatile lipid oxidation products in complex food matrices

DEFF Research Database (Denmark)

Jacobsen, Charlotte; Yesiltas, Betül

A range of different methods are available to determine secondary volatile lipid oxidation products. These methods include e.g. spectrophotometric determination of anisidine values and TBARS as well as GC based methods for determination of specific volatile oxidation products such as pentanal...... headspace methods on the same food matrices will be presented....

An update on neurotoxin products and administration methods.

Science.gov (United States)

Lanoue, Julien; Dong, Joanna; Do, Timothy; Goldenberg, Gary

2016-09-01

Since onabotulinumtoxinA for nonsurgical aesthetic enhancement of glabellar lines was initially reported, the popularity of botulinum neurotoxin (BoNT) products among both clinicians and consumers has rapidly grown, and we have seen several additional BoNT formulations enter the market. As the demand for minimally invasive cosmetic procedures continues to increase, we will see the introduction of additional formulations of BoNT products as well as new delivery devices and administration techniques. In this article, we provide a brief update on current and upcoming BoNT products and also review the literature on novel administration methods based on recently published studies.

Maintenance planning support method for nuclear power plants based on collective decision making

International Nuclear Information System (INIS)

Shimizu, Shunichi; Sakurai, Shoji; Takaoka, Kazushi; Kanemoto, Shigeru; Fukutomi, Shigeki

1992-01-01

Inspection and maintenance planning in nuclear power plants is conducted by decision making based on experts' collective consensus. However, since a great deal of time and effort is required to reach a consensus among expert judgments, the establishment of effective decision making methods is necessary. Therefore, the authors developed a method for supporting collective decision making, based on a combination of three types of decision making methods; the Characteristic Diagram method, Interpretative Structural Modeling method, and the Analytic Hierarchy Process method. The proposed method enables us to determine the evaluation criteria systematically for collective decision making, and also allows extracting collective decisions using simplified questionnaires. The proposed method can support reaching a consensus of groups effectively through the evaluation of collective decision structural models and their characteristics. In this paper, the effectiveness of the proposed method was demonstrated through its application to the decision making problem concerning whether or not the improved ultrasonic testing equipment should be adopted at nuclear power plants. (author)

PRODUCT OPTIMIZATION METHOD BASED ON ANALYSIS OF OPTIMAL VALUES OF THEIR CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Constantin D. STANESCU

2016-05-01

Full Text Available The paper presents an original method of optimizing products based on the analysis of optimal values of their characteristics . Optimization method comprises statistical model and analytical model . With this original method can easily and quickly obtain optimal product or material .

Foundation, and also method for its production

NARCIS (Netherlands)

Katsma, H.

2001-01-01

Foundation, and method for the production of such a foundation. It is proposed that it be based on prefabricated concrete elements. The elements consist of base elements (2) and end elements (4). Each element is provided with two sockets for receiving pretensioning cables (6), which sockets are

[Proposal of a conceptual method of supportive care for co-active patients].

Science.gov (United States)

Abidli, Yamine; Piette, Danielle; Casini, Annalisa

2015-01-01

There is a broad consensus on the importance for health professionals to support co-active patients. However, in practice, very few "patient care partnership" approaches have been developed. We hypothesized that the lack of investment in supporting patient care partnerships is due to the lack of interest in the skills needed by caregivers to provide such support. This paper intends to address thisgap. The patient care partnership method is studied, adapted and developed from existing models. It complements, harmonizes and integrates various schools of thought arising from the need to place the patient at the center of care and life in general. The patient care partnership method includes 7 stages during which the professional accompanies the patient through the process of care. The methodological approach for training professionals is designed to ensure that professionals experience the change as well as its difficulties of the change they expect from the patient in the care relationship. This method now needs to be validated by the experience of other professionals in order define the limits of application and to allow further development.

Performance Comparison Between Support Vector Regression and Artificial Neural Network for Prediction of Oil Palm Production

Directory of Open Access Journals (Sweden)

Mustakim Mustakim

2016-02-01

Full Text Available The largest region that produces oil palm in Indonesia has an important role in improving the welfare of society and economy. Oil palm has increased significantly in Riau Province in every period, to determine the production development for the next few years with the functions and benefits of oil palm carried prediction production results that were seen from time series data last 8 years (2005-2013. In its prediction implementation, it was done by comparing the performance of Support Vector Regression (SVR method and Artificial Neural Network (ANN. From the experiment, SVR produced the best model compared with ANN. It is indicated by the correlation coefficient of 95% and 6% for MSE in the kernel Radial Basis Function (RBF, whereas ANN produced only 74% for R2 and 9% for MSE on the 8th experiment with hiden neuron 20 and learning rate 0,1. SVR model generates predictions for next 3 years which increased between 3% - 6% from actual data and RBF model predictions.

A generic method for the identification of options for cleaner products

NARCIS (Netherlands)

Heijungs, Reinout

1994-01-01

Life cycle assessment, a method for the assessment of the environmental impacts of products, is briefly explained. A mathematical method to perform the calculations and to identify dominant aspects in the environmental load of a product is developed. The results are used to derive expressions for a

Extension classification method for low-carbon product cases

Directory of Open Access Journals (Sweden)

Yanwei Zhao

2016-05-01

Full Text Available In product low-carbon design, intelligent decision systems integrated with certain classification algorithms recommend the existing design cases to designers. However, these systems mostly dependent on prior experience, and product designers not only expect to get a satisfactory case from an intelligent system but also hope to achieve assistance in modifying unsatisfactory cases. In this article, we proposed a new categorization method composed of static and dynamic classification based on extension theory. This classification method can be integrated into case-based reasoning system to get accurate classification results and to inform designers of detailed information about unsatisfactory cases. First, we establish the static classification model for cases by dependent function in a hierarchical structure. Then for dynamic classification, we make transformation for cases based on case model, attributes, attribute values, and dependent function, thus cases can take qualitative changes. Finally, the applicability of proposed method is demonstrated through a case study of screw air compressor cases.

Utilizing product configuration systems for supporting the critical parts of the engineering processes

DEFF Research Database (Denmark)

Kristjansdottir, Katrin; Shafiee, Sara; Hvam, Lars

2016-01-01

Engineering-To-Order (ETO) companies have to respond to increasing demands to provide highly customized and complex products with high quality at competitive prices. In order to respond to those challenges ETO companies have started to implement product configuration systems (PCS) to increase...... to be supported with the PCSs is not described in the current literature. This paper aims to pursue that research opportunity by presenting a framework, which aims to identifying the critical parts of the engineering processes in order to identify where it most beneficial to implement a PCSs and how to prioritize...

Optimal Control Method for Wind Farm to Support Temporary Primary Frequency Control with Minimized Wind Energy Cost

DEFF Research Database (Denmark)

Wang, Haijiao; Chen, Zhe; Jiang, Quanyuan

2015-01-01

This study proposes an optimal control method for variable speed wind turbines (VSWTs) based wind farm (WF) to support temporary primary frequency control. This control method consists of two layers: temporary frequency support control (TFSC) of the VSWT, and temporary support power optimal...... dispatch (TSPOD) of the WF. With TFSC, the VSWT could temporarily provide extra power to support system frequency under varying and wide-range wind speed. In the WF control centre, TSPOD optimally dispatches the frequency support power orders to the VSWTs that operate under different wind speeds, minimises...... the wind energy cost of frequency support, and satisfies the support capabilities of the VSWTs. The effectiveness of the whole control method is verified in the IEEE-RTS built in MATLABSimulink, and compared with a published de-loading method....

Interest of Supportive and Barrier Protective Skin Care Products in the Daily Prevention and Treatment of Cutaneous Toxicity During Radiotherapy for Breast Cancer

Directory of Open Access Journals (Sweden)

Antoine Berger

2018-01-01

Full Text Available Purpose: As many as 50% of patients with cancer develop acute skin reactions to some degree with radiotherapy. Proactive skin care is often recommended to minimise these skin reactions and maintain the integrity of the epidermal barrier; nevertheless, no consensual guidelines are systematically used. This multicentre, observational, prospective study evaluated the tolerability and benefit of supportive and barrier protective skin care products in preventing radiotherapy-induced skin reactions in 253 women initiating radiotherapy (exclusive or adjuvant for breast cancer. Methods: Patients received a kit of 5 commercially available skin care products before the first radiotherapy treatment. The following variables were assessed: cutaneous adverse events, investigator-assessed skin reactions (oedema, erythema, dryness, desquamation before and after radiotherapy course, investigator, and patient opinion on products benefit. Results were analysed by frequency of product use (heavy versus low. Results: Average age was 60 years (range: 34-85. Over 92% of patients reported good to excellent tolerance on irradiated skin for each product. During the 6-week radiotherapy period, we observed that heavy product users had less skin reactions than the low users, particularly within 10 days of radiotherapy initiation (8% versus 18%; p  = .031. Positive physician’s opinion on product use was more frequent for high (66.6% versus low (32% users. Patient-assessed patient benefit index was generally >1, indicating relevant treatment benefit, with a tendency for better benefit in high versus low users. Conclusions: These results support recommendations to use skin care products to minimise the impact of secondary cutaneous reactions with radiotherapy cancer treatment.

Methods and systems for the production of hydrogen

Science.gov (United States)

Oh, Chang H [Idaho Falls, ID; Kim, Eung S [Ammon, ID; Sherman, Steven R [Augusta, GA

2012-03-13

Methods and systems are disclosed for the production of hydrogen and the use of high-temperature heat sources in energy conversion. In one embodiment, a primary loop may include a nuclear reactor utilizing a molten salt or helium as a coolant. The nuclear reactor may provide heat energy to a power generation loop for production of electrical energy. For example, a supercritical carbon dioxide fluid may be heated by the nuclear reactor via the molten salt and then expanded in a turbine to drive a generator. An intermediate heat exchange loop may also be thermally coupled with the primary loop and provide heat energy to one or more hydrogen production facilities. A portion of the hydrogen produced by the hydrogen production facility may be diverted to a combustor to elevate the temperature of water being split into hydrogen and oxygen by the hydrogen production facility.

Renewable energy production support schemes for residential-scale solar photovoltaic systems in Nordic conditions

International Nuclear Information System (INIS)

Hirvonen, Janne; Kayo, Genku; Cao, Sunliang; Hasan, Ala; Sirén, Kai

2015-01-01

The objective of this study was to examine the effect of production-based support schemes on the economic feasibility of residential-scale PV systems (1–10 kW) in Finland. This was done by calculating the payback time for various sizes of newly installed PV systems for a Finnish detached house with district heating. Three types of economic support schemes (guaranteed selling price, fixed premiums and self-consumption incentives) were tested in an hourly simulation. The load of the building was based on real-life measurements, while PV output was simulated with TRNSYS software. The energy results were post-processed with economic data in MATLAB to find the payback time. Hourly electricity prices from the Nordic energy market were used with PV system prices from Finnish companies. Unsubsidised residential PV systems in Finland had payback times of more than 40 years. The production-based support for PV generation needs to be two to three times the buying price of electricity, to make it possible to pay back the initial investment in 20 years. Low capacity systems with more than 50% self-consumption (under 3 kW) were favoured by self-consumption incentives, while high capacity systems with less than 40% self-consumption (over 5 kW) were favoured by the FIT-type support schemes. - Highlights: • Unsubsidised residential PV is uneconomical in Finland. • Support rate must be 2 times the electricity price for reasonable payback time. • Even using all electricity on-site is not profitable enough without support. • Assumed real interest rate had great influence on payback time. • Hourly electricity prices are much lower than average values from Finnish statistics

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2010-08-01

This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

FINANCIAL-ECONOMIC INTEGRATION AS A TOOL FOR INCREASE OF INVESTMENT SUPPORT OF AGRO-INDUSTRIAL PRODUCTION

Directory of Open Access Journals (Sweden)

E. R. Zakirova

2017-01-01

Full Text Available The article reveals the essence and systematizes the advantages of financial and economic integration. In the agro-industrial complex, this kind of integration contributes to attracting investments and reducing risks for investors, increasing the competitiveness and economic growth of the region. The relevance of the study is due to insufficiently researched remains many aspects of the functioning of integrated business systems in relation to individual industries, in particular, to agroindustrial production. The aim of the article is to study theoretical approaches to the essence of financial and economic integration in agro-industrial production and analyze the mechanism of investment support for the Russian agrarian sector, taking into account financial and economic integration. In preparing the article, general scientific methods of research were used: analysis and synthesis, generalization, comparison, classification. Results. The interpretation of financial and economic integration in Russian and foreign scientific publications is generalized. Distinctions of financial and economic integration are distinguished from other economic processes. The advantages of financial and economic integration for the economy and business entities are systematized. The importance of integrating industries and business entities in the agro-industrial complex, which is of strategic importance for ensuring Russia's food security, was noted. The branch structure of the agro-industrial complex is analyzed. The scheme of the integrated financial and economic mechanism in the agroindustrial complex is described. The importance of an optimal balance between cooperation and integration was underscored. The insufficiency of the methodological level of studies of agro-industrial integration is grounded. The components of the effect of financial and economic integration are considered. Positive effects of integration processes in the agroindustrial complex are

Optimisation of production from an oil-reservoir using augmented Lagrangian methods

Energy Technology Data Exchange (ETDEWEB)

Doublet, Daniel Christopher

2007-07-01

This work studies the use of augmented Lagrangian methods for water flooding production optimisation from an oil reservoir. Commonly, water flooding is used as a means to enhance oil recovery, and due to heterogeneous rock properties, water will flow with different velocities throughout the reservoir. Due to this, water breakthrough can occur when great regions of the reservoir are still unflooded so that much of the oil may become 'trapped' in the reservoir. To avoid or reduce this problem, one can control the production so that the oil recovery rate is maximised, or alternatively the net present value (NPV) of the reservoir is maximised. We have considered water flooding, using smart wells. Smart wells with down-hole valves gives us the possibility to control the injection/production at each of the valve openings along the well, so that it is possible to control the flowregime. One can control the injection/production at all valve openings, and the setting of the valves may be changed during the production period, which gives us a great deal of control over the production and we want to control the injection/ production so that the profit obtained from the reservoir is maximised. The problem is regarded as an optimal control problem, and it is formulated as an augmented Lagrangian saddle point problem. We develop a method for optimal control based on solving the Karush-Kuhn-Tucker conditions for the augmented Lagrangian functional, a method, which to my knowledge has not been presented in the literature before. The advantage of this method is that we do not need to solve the forward problem for each new estimate of the control variables, which reduces the computational effort compared to other methods that requires the solution of the forward problem every time we find a new estimate of the control variables, such as the adjoint method. We test this method on several examples, where it is compared to the adjoint method. Our numerical experiments show

Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

Science.gov (United States)

Jones, Harry

2005-01-01

The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

Science.gov (United States)

Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

2009-12-01

Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

Directory of Open Access Journals (Sweden)

Young Joo Song

2009-12-01

Full Text Available Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

An analysis of the benefits of ethnography design methods for product modelling

Science.gov (United States)

Butlewski, M.; Misztal, A.; Belu, N.

2016-08-01

application of ethnography design methodology in product design and to analyse the benefits of its use. The analysis is based on effects of its application with the support of product design from various industries, along with a discussion of the method's limitations. Among benefits of ethnography design, the greatest proved to be providing knowledge of nonspecific user behaviour previously unknown to designers, which when rendered by models allowed to develop innovative solutions.

Agricultural Production. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

Science.gov (United States)

Batman, Kangan; Gadd, Nick; Lucas, Michele

This publication contains the three communication skills units of the three levels of Support Materials for Agricultural Training (SMAT) in agricultural production: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her written and spoken communication skills needed to deal with…

Methods Used for Teaching Psychomotor Skills in Crop Production.

Science.gov (United States)

Osborne, Edward W.

1988-01-01

The purpose of this study was to determine the degree of psychomotor skill instruction in crop production provided by agricultural production teachers in Illinois and the methods used for this teaching. Responses from 79 of 100 teachers indicated that most do not have students observe or practice a procedure for skill improvement. More experienced…

Supporting evidence-based analysis for modified risk tobacco products through a toxicology data-sharing infrastructure [version 2; referees: 2 approved

Directory of Open Access Journals (Sweden)

Stéphanie Boué

2017-09-01

Full Text Available The US FDA defines modified risk tobacco products (MRTPs as products that aim to reduce harm or the risk of tobacco-related disease associated with commercially marketed tobacco products.  Establishing a product’s potential as an MRTP requires scientific substantiation including toxicity studies and measures of disease risk relative to those of cigarette smoking.  Best practices encourage verification of the data from such studies through sharing and open standards. Building on the experience gained from the OpenTox project, a proof-of-concept database and website (INTERVALS has been developed to share results from both in vivo inhalation studies and in vitro studies conducted by Philip Morris International R&D to assess candidate MRTPs. As datasets are often generated by diverse methods and standards, they need to be traceable, curated, and the methods used well described so that knowledge can be gained using data science principles and tools. The data-management framework described here accounts for the latest standards of data sharing and research reproducibility. Curated data and methods descriptions have been prepared in ISA-Tab format and stored in a database accessible via a search portal on the INTERVALS website. The portal allows users to browse the data by study or mechanism (e.g., inflammation, oxidative stress and obtain information relevant to study design, methods, and the most important results. Given the successful development of the initial infrastructure, the goal is to grow this initiative and establish a public repository for 21st-century preclinical systems toxicology MRTP assessment data and results that supports open data principles.

Radiation methods for demercaptanization and desulfurization of oil products

International Nuclear Information System (INIS)

Zaykina, R.F.; Zaykin, Yu.A.; Mamonova, T.B.; Nadirov, N.K.

2002-01-01

A two-stage method for the desulfurization of oil is presented. The first stage strongly oxidizes sulfuric material to do away with its chemical aggressiveness and promote its removal. Desulfurization of the overall product is reached at the second stage by means of conventional methods

Radiation methods for demercaptanization and desulfurization of oil products

Science.gov (United States)

Zaykina, R. F.; Zaykin, Yu. A.; Mamonova, T. B.; Nadirov, N. K.

2002-03-01

A two-stage method for the desulfurization of oil is presented. The first stage strongly oxidizes sulfuric material to do away with its chemical aggressiveness and promote its removal. Desulfurization of the overall product is reached at the second stage by means of conventional methods.

Production Logistics Simulation Supported by Process Description Languages

Directory of Open Access Journals (Sweden)

Bohács Gábor

2016-03-01

Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

Validation of method in instrumental NAA for food products sample

International Nuclear Information System (INIS)

Alfian; Siti Suprapti; Setyo Purwanto

2010-01-01

NAA is a method of testing that has not been standardized. To affirm and confirm that this method is valid. it must be done validation of the method with various sample standard reference materials. In this work. the validation is carried for food product samples using NIST SRM 1567a (wheat flour) and NIST SRM 1568a (rice flour). The results show that the validation method for testing nine elements (Al, K, Mg, Mn, Na, Ca, Fe, Se and Zn) in SRM 1567a and eight elements (Al, K, Mg, Mn, Na, Ca, Se and Zn ) in SRM 1568a pass the test of accuracy and precision. It can be conclude that this method has power to give valid result in determination element of the food products samples. (author)

Determination of photooxygenation products of rotenone with isotope dilution method

International Nuclear Information System (INIS)

Chubachi, Mitsuo; Hamada, Masayuki

1975-01-01

When rotenone dissolved in certain solvent was photochemically oxidized, rotenolones, dehydrorotenone and rotenonone were obtained as main products. In order to determine the quantitative yields of these compounds in photooxygenation products, four compounds mentioned above were labeled with carbon-14 and the isotope dilution method by these labeled compounds was applied to the product analysis. (auth.)

48 CFR 225.401-71 - Products or services in support of operations in Iraq or Afghanistan.

Science.gov (United States)

2010-10-01

... support of operations in Iraq or Afghanistan. 225.401-71 Section 225.401-71 Federal Acquisition... Afghanistan. When acquiring products or services, other than small arms, in support of operations in Iraq or Afghanistan— (a) If using the procedure specified in 225.7703-1(a)(1), the purchase restriction at FAR 25.403...

Monte Carlo Method with Heuristic Adjustment for Irregularly Shaped Food Product Volume Measurement

Directory of Open Access Journals (Sweden)

Joko Siswantoro

2014-01-01

Full Text Available Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Monte Carlo method with heuristic adjustment for irregularly shaped food product volume measurement.

Science.gov (United States)

Siswantoro, Joko; Prabuwono, Anton Satria; Abdullah, Azizi; Idrus, Bahari

2014-01-01

Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Productivity of a coral reef using boundary layer and enclosure methods

Science.gov (United States)

McGillis, W.R.; Langdon, C.; Loose, B.; Yates, K.K.; Corredor, Jorge

2011-01-01

The metabolism of Cayo Enrique Reef, Puerto Rico, was studied using in situ methods during March 2009. Benthic O2 fluxes were used to calculate net community production using both the boundary layer gradient and enclosure techniques. The boundary layer O2 gradient and the drag coefficients were used to calculate productivity ranging from -12.3 to 13.7 mmol O2 m-2 h-1. Productivity measurements from the enclosure method ranged from -11.0 to 12.9 mmol O2 m-2 h-1. During the study, the mean hourly difference between the methods was 0.65 mmol O2 m-2 h-1 (r2 = 0.92), resulting in well-reconciled estimates of net community production between the boundary layer (-33.1 mmol m-2 d-1) and enclosure (-46.3 mmol m-2 d-1) techniques. The results of these independent approaches corroborate quantified rates of metabolism at Cayo Enrique Reef. Close agreement between methods demonstrates that boundary layer measurements can provide near real-time assessments of coral reef health.

Air quality impact analysis in support of the new production reactor environmental impact statement

International Nuclear Information System (INIS)

Hadley, D.L.

1991-04-01

The Pacific Northwest Laboratory (PNL) conducted this air quality impact analysis for the US Department of Energy (DOE). The purpose of this work was to provide Argonne National Laboratory (ANL) with the required estimates of ground-level concentrations of five criteria air pollutants at the Hanford Site boundary from each of the stationary sources associated with the new production reactor (NPR) and its supporting facilities. The DOE proposes to provide new production capacity for the primary production of tritium and secondary production of plutonium to support the US nuclear weapons program. Three alternative reactor technologies are being considered by DOE: the light-water reactor, the low-temperature, heavy-water reactor, and the modular high-temperature, gas-cooled reactor. In this study, PNL provided estimates of the impacts of the proposed action on the ground-level concentration of the criteria air pollutants for each of the alternative technologies. The criteria pollutants were sulfur dioxide, nitrogen dioxide, carbon monoxide, total suspended particulates, and particulates with a diameter of less than 10 microns. Ground-level concentrations were estimated for the peak construction phase activities expected to occur in 1997 and for the operational phase activities beginning in the year 2000. Ground-level concentrations of the primary air pollutants were estimated to be well below any of the applicable national or state ambient air quality standards. 12 refs., 19 tabs

Neutron–gamma discrimination based on the support vector machine method

International Nuclear Information System (INIS)

Yu, Xunzhen; Zhu, Jingjun; Lin, ShinTed; Wang, Li; Xing, Haoyang; Zhang, Caixun; Xia, Yuxi; Liu, Shukui; Yue, Qian; Wei, Weiwei; Du, Qiang; Tang, Changjian

2015-01-01

In this study, the combination of the support vector machine (SVM) method with the moment analysis method (MAM) is proposed and utilized to perform neutron/gamma (n/γ) discrimination of the pulses from an organic liquid scintillator (OLS). Neutron and gamma events, which can be firmly separated on the scatter plot drawn by the charge comparison method (CCM), are detected to form the training data set and the test data set for the SVM, and the MAM is used to create the feature vectors for individual events in the data sets. Compared to the traditional methods, such as CCM, the proposed method can not only discriminate the neutron and gamma signals, even at lower energy levels, but also provide the corresponding classification accuracy for each event, which is useful in validating the discrimination. Meanwhile, the proposed method can also offer a predication of the classification for the under-energy-limit events

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Concurrent engineering and product models in seafood companies

DEFF Research Database (Denmark)

Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

1998-01-01

Concurrent Engineering (CE) can provide an improved approach to product development for extending the lines of seafood products. Information technology (IT) support tools based on product models can provide an integrated and simultaneous approach for specifying new recipes. The seafood industry can...... benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...

Methods of detection using a cellulose binding domain fusion product

Science.gov (United States)

Shoseyov, Oded; Shpiegl, Itai; Goldstein, Marc A.; Doi, Roy H.

1999-01-01

A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production thereof. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques.

Issues on the Development and Application of Computer Tools to Support Product Structuring and Configuring

DEFF Research Database (Denmark)

Hansen, Claus Thorp; Riitahuhta, A.

2001-01-01

The aim of this article is to make a balance on the results and challenges in the efforts to develop computer tools to support product structuring and configuring in product development projects. The balance will be made in two dimensions, a design science and an industrial dimension. The design ...... that there are large positive effects to be gained for industrial companies by conscious implementing computer tools based on the results of design science. The positive effects will be measured by e.g. predictable product quality, reduced lead time, and reuse of design solutions....

Ruminal Methane Production on Simple Phenolic Acids Addition in in Vitro Gas Production Method

Directory of Open Access Journals (Sweden)

A. Jayanegara

2009-04-01

Full Text Available Methane production from ruminants contributes to total global methane production, which is an important contributor to global warming. In this experiment, six sources of simple phenolic acids (benzoic, cinnamic, phenylacetic, caffeic, p-coumaric and ferulic acids at two different levels (2 and 5 mM added to hay diet were evaluated for their potential to reduce enteric methane production using in vitro Hohenheim gas production method. The measured variables were gas production, methane, organic matter digestibility (OMD, and short chain fatty acids (SCFA. The results showed that addition of cinnamic, caffeic, p-coumaric and ferulic acids at 5 mM significantly (P p-coumaric > ferulic > cinnamic. The addition of simple phenols did not significantly decrease OMD. Addition of simple phenols tends to decrease total SCFA production. It was concluded that methane decrease by addition of phenolic acids was relatively small, and the effect of phenolic acids on methane decrease depended on the source and concentration applied.

Investigating water productivity and economic efficiency of wheat-crop under different sowing methods

International Nuclear Information System (INIS)

Mirani, A.A.; Dahri, Z.H.

2011-01-01

This study was conducted at PARC's research station Kala Shah Kaku, Lahore, in order to calculate the water productivity and economic efficiency of wheat-crop under different sowing methods in a combined harvested paddy filed. The sowing methods were direct drilling with FMI Seeder, Zero tillage and conventional method. Data were collected during 2008-09. Wheat-yield was 2750 kg/ha, 2665 kg/ha and 2610 kg/ha for direct drilling with F MI Seeder, Zero tillage and conventional method, respectively. The direct drilling in heavy residue gave 5.4 % more yield than the conventional method and 3.2 % more yield than zero tillage. The zero tillage ensured 2.1% more yield than the conventional method. The net water applied as 323, 354, and 380 mm for direct drilling with FMI seeder, zero tillage and conventional methods respectively against the potential crop evapotranspiration of 383 mm. This indicates that the direct drilling of wheat-crop in heave rice stubbles saves 15% irrigation water as compared to conventional method and 8.8% over zero tillage. The zero tillage method saves 6.8 % of irrigation water over the conventional method. The water productivity was found to be 0.851 kg/m3. 0.753 kg/m/sup 3/ and 0.687 kg/m/sup 3/ for direct drilling with FMI Seeder, Zero tillage and conventional method respectively. This indicates that the direct drilling ensures 23.9% increase in water productivity over conventional method and 13.01% over zero tillage. The zero tillage gave 9.6% more water productivity than the conventional method. The costs of production for the three sowing methods were Rs. 39123/ha, Rs.43737/ha and Rs. 53047/ha for direct drilling, zero tillage and conventional method respectively. This indicates an overall saving of Rs. 13924/ha (26.2 %) by the direct drilling method as compared to the conventional method and Rs. 4613/ha (10.5%) over zero tillage method. The zero tillage saves Rs. 9319/ha (17.6 %) over the conventional method. Thus, the resource

Method for alignment of product and production concepts

DEFF Research Database (Denmark)

Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

2005-01-01

The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

NARCIS (Netherlands)

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof,

Non-destructive methods and means for quality control of structural products

International Nuclear Information System (INIS)

Dmitriev, V.V.

1989-01-01

Progressive non-destructive methods (acoustic, magnetic, radiation with liquid penetrants) and means of control of structural product quality, allowing to determine the state of products and structures not only immediately after their production but directly at the erected or reconstructed objects are described

A Mixed Methods Examination of the Influence of Dimensions of Support on Training Transfer

Science.gov (United States)

Schindler, Laura A.; Burkholder, Gary J.

2016-01-01

The purpose of this mixed methods sequential explanatory study was to explore how specific dimensions of supervisor support (mentoring, coaching, social support, and task support) influence the transfer of learned knowledge and skills to the job. Quantitative data were collected from employees (N = 48) who develop curriculum at an educational…

A Method of Flow-Shop Re-Scheduling Dealing with Variation of Productive Capacity

Directory of Open Access Journals (Sweden)

Kenzo KURIHARA

2005-02-01

Full Text Available We can make optimum scheduling results using various methods that are proposed by many researchers. However, it is very difficult to process the works on time without delaying the schedule. There are two major causes that disturb the planned optimum schedules; they are (1the variation of productive capacity, and (2the variation of products' quantities themselves. In this paper, we deal with the former variation, or productive capacities, at flow-shop works. When production machines in a shop go out of order at flow-shops, we cannot continue to operate the productions and we have to stop the production line. To the contrary, we can continue to operate the shops even if some workers absent themselves. Of course, in this case, the production capacities become lower, because workers need to move from a machine to another to overcome the shortage of workers and some shops cannot be operated because of the worker shortage. We developed a new re-scheduling method based on Branch-and Bound method. We proposed an equation for calculating the lower bound for our Branch-and Bound method in a practical time. Some evaluation experiments are done using practical data of real flow-shop works. We compared our results with those of another simple scheduling method, and we confirmed the total production time of our result is shorter than that of another method by 4%.

Electrospinning versus fibre production methods: from specifics to technological convergence.

Science.gov (United States)

Luo, C J; Stoyanov, Simeon D; Stride, E; Pelan, E; Edirisinghe, M

2012-07-07

Academic and industrial research on nanofibres is an area of increasing global interest, as seen in the continuously multiplying number of research papers and patents and the broadening range of chemical, medical, electrical and environmental applications. This in turn expands the size of the market opportunity and is reflected in the significant rise of entrepreneurial activities and investments in the field. Electrospinning is probably the most researched top-down method to form nanofibres from a remarkable range of organic and inorganic materials. It is well known and discussed in many comprehensive studies, so why this review? As we read about yet another "novel" method producing multifunctional nanomaterials in grams or milligrams in the laboratory, there is hardly any research addressing how these methods can be safely, consistently and cost-effectively up-scaled. Despite two decades of governmental and private investment, the productivity of nanofibre forming methods is still struggling to meet the increasing demand. This hinders the further integration of nanofibres into practical large-scale applications and limits current uses to niche-markets. Looking into history, this large gap between supply and demand of synthetic fibres was seen and addressed in conventional textile production a century ago. The remarkable achievement was accomplished via extensive collaborative research between academia and industry, applying ingenious solutions and technological convergence from polymer chemistry, physical chemistry, materials science and engineering disciplines. Looking into the present, current advances in electrospinning and nanofibre production are showing similar interdisciplinary technological convergence, and knowledge of industrial textile processing is being combined with new developments in nanofibre forming methods. Moreover, many important parameters in electrospinning and nanofibre spinning methods overlap parameters extensively studied in industrial

ALTERNATIVE METHODS OF TECHNOLOGICAL PROCESSING TO REDUCE SALT IN MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

E. K. Tunieva

2017-01-01

Full Text Available The world trends in table salt reduction in meat products contemplate the use of different methods for preservation of taste and consistency in finished products as well as shelf life prolongation. There are several approaches to a sodium chloride reduction in meat products. The paper presents a review of the foreign studies that give evidence of the possibility to maintain quality of traditional meat products produced with the reduced salt content. The studies in the field of salty taste perception established that a decrease in a salt crystal size to 20 µm enabled reducing an amount of added table salt due to an increase in the salty taste intensity in food products. Investigation of the compatibility of different taste directions is also interesting as one of the approaches to a sodium chloride reduction in food products. The use of water-in-oil-in-water (w/o/w double emulsions allows controlling a release of encapsulated ingredients (salt, which enables enhancement of salty taste. The other alternative method of technological processing of meat raw material for reducing salt in meat products is the use of high pressure processing. This method has several advantages and allows not only an increase in the salty taste intensity, but also formation of a stable emulsion, an increase in water binding capacity of minced meat and extension of shelf-life.

A modular modulation method for achieving increases in metabolite production.

Science.gov (United States)

Acerenza, Luis; Monzon, Pablo; Ortega, Fernando

2015-01-01

Increasing the production of overproducing strains represents a great challenge. Here, we develop a modular modulation method to determine the key steps for genetic manipulation to increase metabolite production. The method consists of three steps: (i) modularization of the metabolic network into two modules connected by linking metabolites, (ii) change in the activity of the modules using auxiliary rates producing or consuming the linking metabolites in appropriate proportions and (iii) determination of the key modules and steps to increase production. The mathematical formulation of the method in matrix form shows that it may be applied to metabolic networks of any structure and size, with reactions showing any kind of rate laws. The results are valid for any type of conservation relationships in the metabolite concentrations or interactions between modules. The activity of the module may, in principle, be changed by any large factor. The method may be applied recursively or combined with other methods devised to perform fine searches in smaller regions. In practice, it is implemented by integrating to the producer strain heterologous reactions or synthetic pathways producing or consuming the linking metabolites. The new procedure may contribute to develop metabolic engineering into a more systematic practice. © 2015 American Institute of Chemical Engineers.

Coupling sensing to crop models for closed-loop plant production in advanced life support systems

Science.gov (United States)

Cavazzoni, James; Ling, Peter P.

1999-01-01

We present a conceptual framework for coupling sensing to crop models for closed-loop analysis of plant production for NASA's program in advanced life support. Crop status may be monitored through non-destructive observations, while models may be independently applied to crop production planning and decision support. To achieve coupling, environmental variables and observations are linked to mode inputs and outputs, and monitoring results compared with model predictions of plant growth and development. The information thus provided may be useful in diagnosing problems with the plant growth system, or as a feedback to the model for evaluation of plant scheduling and potential yield. In this paper, we demonstrate this coupling using machine vision sensing of canopy height and top projected canopy area, and the CROPGRO crop growth model. Model simulations and scenarios are used for illustration. We also compare model predictions of the machine vision variables with data from soybean experiments conducted at New Jersey Agriculture Experiment Station Horticulture Greenhouse Facility, Rutgers University. Model simulations produce reasonable agreement with the available data, supporting our illustration.

Session 4: High-throughput screening of supported catalysts for CO{sub x}-free hydrogen production from ammonia

Energy Technology Data Exchange (ETDEWEB)

Hongchao, Liu; Hua, Wang; Zhongmin, Liu; Jianghan, Shen [Natural Gas Utilization and Applied Catalysis Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, P. R. (China)

2004-07-01

In this paper, we used a multi-stream mass spectrometer screening (MSMSS) technique and a multi-stream reactor to select promising candidates from supported transition metal catalyst library, and then combinatorially nitrided and tested silica and SAB-15 supported Mo catalysts for hydrogen production from ammonia. (authors)

APPLICATION OF FTA AND FMEA METHOD TO IMPROVE SUGAR PRODUCTION PROCESS QUALITY

Directory of Open Access Journals (Sweden)

JojoAndriana

2016-10-01

Full Text Available Defective product is a product that has poor quality and do not meet the standart. This defective products can give a bad impact to company, such as high production costs and decreased image company. Several methods that can be used to improve the quality is Six Sigma DMAIC methodology, FTA, and FMEA method. This study is conducted for several purpose, they are to determine the value of sigma level on the process of sugar production in PT.PG. Krebet Baru, to determine the factors that cause defective products in the process of sugar production by the FTA method, and to make a suitable solution based on the FMEA defective causes. The process sigma level in PT.PG.Krebet Baru is 3.58. That value sigma level indicates PT. PG. Krebet Baru is a company that are still growing and need improvement. The primary cause of the defects in the production process is a factor of operator and machine. Mode of failure with the highest RPN at 210 is time for steam process is too long, so they need to install the equipment that can detect the water level on sugar. When this equipment is installed, the exact time for drying will be known and the amount of defective product will be decreased.

NEW MEAT PRODUCTS WITH IMMUNOMODULATORY EFFECT CREATION METHOD

Directory of Open Access Journals (Sweden)

I. V. Kaltovich

2016-01-01

Full Text Available New meat products with immunomodulatory effect creation method reflecting differential characteristics of technological stages of manufacture of those types of meat products, including issues on the selection of primary and secondary raw materials, guidelines for development of formulations and production technologies, legislative requirements towards its labeling, etc, has been developed for the first time. A list of prospective meat raw materials for the manufacture of products with immunomodulatory effect was established: beef, pork, rabbit meat, broiler chicken meat, turkey, veal, ostrich meat, which have high content of protein (14,3– 21,7%, low content of fat (1,2–16,1%, excluding pork (33,3%, high levels of minimum amino-acid score (90,0–104,0%, protein quality indicator(0,91–1,64, essential amino acid index (1,16-1,25, coefficient of utility of amino acid content (0,72–0,86 and close to optimum fatty acid content, and also contain a great number of vitamins and minerals which play a significant role for immunity improvement. It was determined that the following functional ingredients are recommended to use: amino acids (valine, leucine, isoleucine, methionine, threonine, arginine, tryptophan, lysine, histidin, phenylalanyl, vitamins and provitamins (C,E, beta-carotene, B vitamins(Bc, B12, PP, etc., P(bioflavonoid complex, H, K, minerals (calcium, magnesium, iron, cuprum, zinc, manganese, selenium, polyunsaturated fatty acids omega-3 and omega-6, pseudo-vitamins (L-carnitin, coenzyme Q10, polysaccharides and peptides naturally occurring(squalen, B-Carotene, ginger, shiitake mushrooms, probiotics and prebiotics, glutathione, indole and lycopienes, bioflavonoids, L-arginine, N-acetylcysteine, gel from seaweed «Lamifaren». The use of the developed meat products with immunomodulatory effect creation method by process engineers of meat processing factories will allow them to form a single scientifically grounded approach during the

Monitoring of magnetic EOR fluids in reservoir under production by using the electromagnetic method

Science.gov (United States)

KIM, S.; Min, D. J.; Moon, S.; Kim, W. K.; Shin, Y.

2014-12-01

To increase the amount of oil and gas extracted during production, some techniques like EOR (Enhanced Oil Recovery) are applied by injecting some materials such as water and CO2. Recently, there are some researches for injecting magnetic nanoparticles with fluids during EOR. The size of particle is nano-scale, which can prevent particles from adhering to the pores of reservoir. The main purpose of injecting magnetic nanoparticles is to monitor movement or distribution of EOR fluids. To monitor the injected magnetic EOR fluids in the reservoir, CSEM (controlled source electromagnetic method) can be the most optimized geophysical method among various geophysical monitoring methods. Depending on the reservoir circumstances, we can control the electric or magnetic sources to monitor reservoir during oil or gas production. In this study, we perform numerical simulation of CSEM for 3D horizontal-layered models assuming a reservoir under production. We suppose that there are two wells: one is for the controlled source; the other is for the receiver. By changing the distribution, movement and magnetization of EOR fluids, we compare the electric or magnetic fields recorded at the receiver. Maxwell's equations are the governing equation of CSEM and are approximated by using the edge-based finite-element method. Direct solver is applied to solve the linear equations. Because injected magnetic nanoparticle changes the conductivity of EOR fluid, there is high contrast of conductivity of reservoir. This high contrast of conductivity induces secondary electric or magnetic fields that are recorded at the receiver well. We compare these recorded secondary fields generated by various movement or distribution of magnetic EOR fluid. Acknowledgements This work was supported by the "Development of Technology for CO2 Marine Geological Storage" grant funded by the Ministry of Oceans and Fisheries of Korea, by the "Civil Military Technology Cooperation Center", and by the International

Hydrogen production by steam reforming of liquefied natural gas (LNG) over nickel catalysts supported on cationic surfactant-templated mesoporous aluminas

Science.gov (United States)

Seo, Jeong Gil; Youn, Min Hye; Park, Sunyoung; Jung, Ji Chul; Kim, Pil; Chung, Jin Suk; Song, In Kyu

Two types of mesoporous γ-aluminas (denoted as A-A and A-S) are prepared by a hydrothermal method under different basic conditions using cationic surfactant (cetyltrimethylammonium bromide, CTAB) as a templating agent. A-A and A-S are synthesized in a medium of ammonia solution and sodium hydroxide solution, respectively. Ni/γ-Al 2O 3 catalysts (Ni/A-A and Ni/A-S) are then prepared by an impregnation method, and are applied to hydrogen production by steam reforming of liquefied natural gas (LNG). The effect of a mesoporous γ-Al 2O 3 support on the catalytic performance of Ni/γ-Al 2O 3 is investigated. The identity of basic solution strongly affects the physical properties of the A-A and A-S supports. The high surface-area of the mesoporous γ-aluminas and the strong metal-support interaction of supported catalysts greatly enhance the dispersion of nickel species on the catalyst surface. The well-developed mesopores of the Ni/A-A and Ni/A-S catalysts prohibit the polymerization of carbon species on the catalyst surface during the reaction. In the steam reforming of LNG, both Ni/A-A and Ni/A-S catalysts give better catalytic performance than the nickel catalyst supported on commercial γ-Al 2O 3 (Ni/A-C). In addition, the Ni/A-A catalyst is superior to the Ni/A-S catalyst. The relatively strong metal-support interaction of Ni/A-A catalyst effectively suppresses the sintering of metallic nickel and the carbon deposition in the steam reforming of LNG. The large pores of the Ni/A-A catalyst also play an important role in enhancing internal mass transfer during the reaction.

Kickstarting Creativity: Supporting the Productive Faces of Uncertainty in Information Practice

Science.gov (United States)

Anderson, Theresa Dirndorfer

2010-01-01

Introduction: Examines implications of research suggesting fast access to information may reduce the time needed for creative thinking and reflection. To support human thought through information provision, more opportunities to experience and work with imperfect information and to engage with ambiguities are needed. Method: Four linked arguments…

Current methods of non-invasive ventilatory support for neonates.

Science.gov (United States)

Mahmoud, Ramadan A; Roehr, Charles Christoph; Schmalisch, Gerd

2011-09-01

Non-invasive ventilatory support can reduce the adverse effects associated with intubation and mechanical ventilation, such as bronchopulmonary dysplasia, sepsis, and trauma to the upper airways. In the last 4 decades, nasal continuous positive airway pressure (CPAP) has been used to wean preterm infants off mechanical ventilation and, more recently, as a primary mode of respiratory support for preterm infants with respiratory insufficiency. Moreover, new methods of respiratory support have been developed, and the devices used to provide non-invasive ventilation (NIV) have improved technically. Use of NIV is increasing, and a variety of equipment is available in different clinical settings. There is evidence that NIV improves gas exchange and reduces extubation failure after mechanical ventilation in infants. However, more research is needed to identify the most suitable devices for particular conditions; the NIV settings that should be used; and whether to employ synchronized or non-synchronized NIV. Furthermore, the optimal treatment strategy and the best time for initiation of NIV remain to be identified. This article provides an overview of the use of non-invasive ventilation (NIV) in newborn infants, and the clinical applications of NIV. Copyright © 2011 Elsevier Ltd. All rights reserved.

User Experience Evaluation Methods in Product Development (UXEM'09)

Science.gov (United States)

Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

Method of processing liquid waste containing fission product

International Nuclear Information System (INIS)

Funabashi, Kiyomi; Kawamura, Fumio; Matsuda, Masami; Komori, Itaru; Miura, Eiichi.

1988-01-01

Purpose: To prepare solidification products of low surface dose by removing cesium which is main radioactive nuclides from re-processing plants. Method: Liquid wastes containing a great amount of fission products are generated accompanying the reprocessing for spent nuclear fuels. After pH adjustment, the liquid wastes are sent to a concentrator to concentrate the dissolved ingredients. The concentrated liquid wastes are pumped to an adsorption tower in which radioactive cesium contributing much to the surface dose is removed. Then, the liquid wastes are sent by way of a surge tank to a mixing tank, in which they are mixed under stirring with solidifying agents such as cements. Then, the mixture is filled in a drum-can and solidified. According to this invention, since radioactive cesium is removed before solidification, it is possible to prepare solidification products at low surface dose and facilitate the handling of the solidification products. (Horiuchi, T.)

In vitro methods for evaluating skin hydration under diapers and incontinence products.

Science.gov (United States)

Tate, M L; Wright, A S

2017-11-01

Excessive skin hydration from wearing wet undergarments, such as infant diapers and adult incontinence products, has been historically problematic. Skin damage occurs from wetness (urine) and limited product breathability. Evaporative water loss has been measured on adult arms (armband method) or infant torsos (on-baby method), after wearing a saline-insulted diaper product. The current study developed a reliable in vitro method of evaluating diaper and incontinence products for improvements in skin dryness. A simulated skin substrate was applied to a heated mechanical arm or baby torso. A disposable diaper or incontinence product was wrapped around the arm or baby torso, and loaded with saline. Hydration of the simulated skin was measured by evaporimetry and compared with clinical data from adult armband evaluations. The heated mechanical arm and baby torso accurately distinguished products for skin dryness. Eight diaper products were evaluated and compared to human test results. The torso in vitro and mechanical arm evaluations demonstrated strong correlations to human epidermal water loss evaluations, with repeatable results. Additionally, the bench test has been used for adult incontinence products, and it proved to differentiate those products as well as infant products. A rapid and reliable means of evaluation has been developed, and it is predictive of human subject testing. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

US Religious Congregations' Programming to Support Veterans: A Mixed Methods Study.

Science.gov (United States)

Derose, Kathryn Pitkin; Haas, Ann; Werber, Laura

2016-06-01

Religious congregations may be well equipped to address veterans' reintegration needs, but little is known about the prevalence and nature of such support. We conducted a mixed methods study using nationally representative congregational survey data and in-depth interviews with congregational leaders. Overall, 28% of congregations nationally reported having programming to support veterans and positive, independent predictors included: community context (county veteran presence, high-poverty census tract, rural compared to urban location); congregational resources (more adult attendees, having a paid employee that spent time on service programs); and external engagement (assessing community needs, collaboration, and social service participation). Qualitative interviews revealed a range of activities, including attending to spiritual issues, supporting mental, physical and social well-being, and addressing vocational, legal, financial, and material needs.

China's New Rural Income Support Policy: Impacts on Grain Production and Rural Income Inequality

NARCIS (Netherlands)

Heerink, N.; Kuiper, M.H.; Shi Xiaoping, X.

2006-01-01

This paper analyses the impact of agricultural tax abolition and direct income payments to grain farmers on grain production and rural inequality in China. To separate the impact of the income support measures from recent price trends for grains and inputs, and to account for differences in

Decision support methods for the environmental assessment of contamination at mining sites.

Science.gov (United States)

Jordan, Gyozo; Abdaal, Ahmed

2013-09-01

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a 'holistic' approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.

Analysis of operator support method based on intelligent dynamic interlock in lead-cooled fast reactor simulator

International Nuclear Information System (INIS)

Xu, Peng; Wang, Jianye; Yang, Minghan; Wang, Weitian; Bai, Yunqing; Song, Yong

2017-01-01

Highlights: • We development an operator support method based on intelligent dynamic interlock. • We offer an integrated aid system to reduce the working strength of operators. • The method can help operators avoid dangerous, irreversible operation. • This method can be used in the fusion research reactor in the further. - Abstract: In nuclear systems, operators have to carry out corrective actions when abnormal situations occur. However, operators might make mistakes under pressure. In order to avoid serious consequences of the human errors, a new method for operators support based on intelligent dynamic interlock was proposed. The new method based on full digital instrumentation and control system, contains real-time alarm analysis process, decision support process and automatic safety interlock process. Once abnormal conditions occur, necessary safety interlock parameter based on analysis of real-time alarm and decision support process can be loaded into human-machine interfaces and controllers automatically, and avoid human errors effectively. Furthermore, the new method can make recommendations for further use and development of this technique in nuclear power plant or fusion research reactor.

Application of advanced methods for the prognosis of production energy consumption

International Nuclear Information System (INIS)

Stetter, R; Witczak, P; Spindler, C; Hertel, J; Staiger, B

2014-01-01

This paper, based on a current research project, describes the application of advanced methods that are frequently used in fault-tolerance control and addresses the issue of the prognosis of energy efficiency. Today, the energy a product requires during its operation is the subject of many activities in research and development. However, the energy necessary for the production of goods is very often not analysed in comparable depth. In the field of electronics, studies come to the conclusion that about 80% of the total energy used by a product is from its production [1]. The energy consumption in production is determined very early in the product development process by designers and engineers, for example through selection of raw materials, explicit and implicit requirements concerning the manufacturing and assembly processes, or through decisions concerning the product architecture. Today, developers and engineers have at their disposal manifold design and simulation tools which can help to predict the energy consumption during operation relatively accurately. In contrast, tools with the objective to predict the energy consumption in production and disposal are not available. This paper aims to present an explorative study of the use of methods such as Fuzzy Logic to predict the production energy consumption early in the product development process

Validation of the HTO-18 method for determination of CO2 production of lizards (genus Sceloporus)

International Nuclear Information System (INIS)

Congdon, J.D.; King, W.W.; Nagy, K.A.

1978-01-01

The accuracy of doubly-labeled water measurements of CO 2 production in lizards of the genus Sceloporus was assessed by comparison of CO 2 production rates determined simultaneously by labeled water and gas chromatography. Five lizards were weighed and given intraperitoneal injections of 55 μl of water containing 10 microcuries of tritium as HTO and 50 atom % oxygen-18 as H 2 18 O. Initial blood samples were taken from the infraorbital sinus ten hours later, and the lizards were placed in sealed metabolism chambers kept at 28 C. After 179 h the lizards were weighed and blood samples taken. Blood samples were microdistilled, assayed for tritium activity and for oxygen-18 content. Isotope measurements were used to calculate rates of CO 2 production. Gas samples were withdrawn from each chamber after 18, 63, 109, and 179 h and measured against 0.5 and 1.0% CO 2 standards with a Beckman GC-55 gas chromatograph fitted with silica gel 42-60 mesh column. These results were used to calculate rates of CO 2 production. Results supported the conclusion that the doubly-labeled water method accurately measured rates of CO 2 production in Sceloporus lizards, and could therefore be a valuable technique in field studies of lizard energetics

Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

Energy Technology Data Exchange (ETDEWEB)

Conrad, F.; Tonn, B.

1999-05-01

This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

Material report in support to RCC-MRX code 2010 stainless steel parts and products

International Nuclear Information System (INIS)

Ancelet, Olivier; Lebarbe, Thierry; Dubiez-Le Goff, Sophie; Bonne, Dominique; Gelineau, Odile

2012-01-01

This paper presents the Material Report dedicated to stainless steels parts and products issued by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-Nucleaires) in support to RCC-MRx 2010 Code. The RCC-MRx Code is the result of the merger of the RCC-MX 2008, developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007, which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER (a presentation of RCC-MRx 2010 Code is the subject of another paper proposed in this Congress; it explains in particular the status of this Code). This Material Report is part of a set of Criteria of RCC-MRx (this set of Criteria is under construction). The Criteria aim at explaining the design and construction rules of the Code. They cover analyses rules as well as part procurement, welding, methods of tests and examination and fabrication rules. The Material Report particularly provides justifications and explanations on requirements and features dealing with parts and products proposed in the Code. The Material Report contains the following information: Introduction of the grade(s): codes and standards and Reference Procurement Specifications covering parts and products, applications and experience gained, - Physical properties, - Mechanical properties used for design calculations (base metal and welds): basic mechanical properties, creep mechanical properties, irradiated mechanical properties, - Fabrication: experience gained, metallurgy, - Welding: weldability, experience gained during welding and repair procedure qualifications, - Non-destructive examination, - In-service behaviour. In the article, examples of data supplied in the Material Report dedicated to stainless steels will be exposed. (authors)

Method s for Measuring Productivity in Libraries and Information Centres

OpenAIRE

Mohammad Alaaei

2009-01-01

  Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system perfor...

Method for producing ethanol and co-products from cellulosic biomass

Science.gov (United States)

Nguyen, Quang A

2013-10-01

The present invention generally relates to processes for production of ethanol from cellulosic biomass. The present invention also relates to production of various co-products of preparation of ethanol from cellulosic biomass. The present invention further relates to improvements in one or more aspects of preparation of ethanol from cellulosic biomass including, for example, improved methods for cleaning biomass feedstocks, improved acid impregnation, and improved steam treatment, or "steam explosion."

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

Science.gov (United States)

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

Self-management-support in dementia care: A mixed methods study among nursing staff.

Science.gov (United States)

Verkaik, Renate; van Antwerpen-Hoogenraad, Paulien; de Veer, Anke; Francke, Anneke; Huis In Het Veld, Judith

2017-11-01

Background Self-management in patients and family caregivers confronted with dementia is not self-evident. Self-management skills may be limited because of the progressive cognitive decline of the patient and because family caregivers are often also very aged. Self-management support by nursing staff is therefore of paramount importance. Objectives To gain insight into how nursing staff perceive their self-management support tasks, and how they put them into practice. Research questions are: 'What are the opinions and experiences of Dutch nursing staff working in home care or residential elderly care regarding self-management support for people with dementia and their family caregivers?' and 'Do nursing staff feel sufficiently trained and skilled for self-management support?'. Methods A mixed methods approach was used, combining cross-sectional quantitative survey data from 206 Dutch nursing professionals with qualitative interviews among 12 nursing staff working in home care or residential elderly care in The Netherlands. Results Nursing staff working in home care experienced self-management support of people with dementia as a part of their job and as an attractive task. They consider 'helping people with dementia to maintain control over their lives by involving them in decisions in daily care' the essence of self-management support. Nursing staff saw family caregivers as their main partners in providing self-management support to the patient. They were less aware that family caregivers themselves might also need self-management support. Nursing staff often felt insufficiently trained to give adequate self-management support. RN's and CNA's did not differ in their opinions, experiences and training needs. Conclusions Nursing staff in home care do consider self-management support an important and attractive task in dementia care. Their skills for providing self-management support to patients with dementia and family caregivers need improvement. Recommendations

Hydrogen Production by Steam Reforming of Ethanol over Nickel Catalysts Supported on Sol Gel Made Alumina: Influence of Calcination Temperature on Supports.

Science.gov (United States)

Yaakob, Zahira; Bshish, Ahmed; Ebshish, Ali; Tasirin, Siti Masrinda; Alhasan, Fatah H

2013-05-30

Selecting a proper support in the catalyst system plays an important role in hydrogen production via ethanol steam reforming. In this study, sol gel made alumina supports prepared for nickel (Ni) catalysts were calcined at different temperatures. A series of (Ni/Al S.G. ) catalysts were synthesized by an impregnation procedure. The influence of varying the calcination temperature of the sol gel made supports on catalyst activity was tested in ethanol reforming reaction. The characteristics of the sol gel alumina supports and Ni catalysts were affected by the calcination temperature of the supports. The structure of the sol gel made alumina supports was transformed in the order of γ → (γ + θ) → θ-alumina as the calcination temperature of the supports increased from 600 °C to 1000 °C. Both hydrogen yield and ethanol conversion presented a volcano-shaped behavior with maximum values of 4.3 mol/mol ethanol fed and 99.5%, respectively. The optimum values were exhibited over Ni/Al S.G800 (Ni catalyst supported on sol gel made alumina calcined at 800 °C). The high performance of the Ni/Al S.G800 catalyst may be attributed to the strong interaction of Ni species and sol gel made alumina which lead to high nickel dispersion and small particle size.

A method of hydrogen production

International Nuclear Information System (INIS)

Schulten, R.; Teggers, H.; Schulze-Bentrop, R.

1975-01-01

This method of producing hydrogen from water in a multistage cycle process works without anorganic salts and requires only gases and liquids. Carbon oxide is catalytically converted into carbon dioxide and water by means of water vapour. The carbon dioxide is then converted into sulphuric acid and carbon oxide using water and sulphur dioxide at high temperatures and pressures, and the sulphuric acid is separated into sulphur dioxide, oxygen and water via the intermediate SO 2 . The SO 2 and CO 2 thus obtained are led back into the appropriate reaction stages, and hydrogen and oxygen are removed from the process as end products. (A schematic flow diagram is given.) (UWI) [de

Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2012-04-01

This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

Space-Based Space Surveillance Logistics Case Study: A Qualitative Product Support Element Analysis

Science.gov (United States)

2017-12-01

REPORT TYPE AND DATES COVERED Joint applied project 4. TITLE AND SUBTITLE SPACE-BASED SPACE SURVEILLANCE LOGISTICS CASE STUDY: A QUALITATIVE ...INTENTIONALLY LEFT BLANK v ABSTRACT This research provides a qualitative analysis of the logistics impacts, effects, and sustainment challenges...provides a qualitative product support element-by-element review for both research questions. Chapters IV and V present the findings, results

Characteristics of alpha-glucosidase production from recombinant Aspergillus oryzae by membrane-surface liquid culture in comparison with various cultivation methods.

Science.gov (United States)

Morita, Masakazu; Shimamura, Hiroko; Ishida, Natsuko; Imamura, Koreyoshi; Sakiyama, Takaharu; Nakanishi, Kazuhiro

2004-01-01

alpha-Glucosidase was produced using recombinant Aspergillus oryzae by membrane-surface liquid culture (MSLC), a method previously developed by the authors and the results compared with other methods, including shaking flask culture (SFC), agar-plate culture (APC), culture on urethane sponge supports (USC), and liquid surface culture (LSC) to determine possible reasons for the advantageous features of MSLC. When yeast extract was used as a nitrogen source, the amount of enzyme produced by MSLC was 5 or more times higher than those for SFC and LSC, but similar to that using APC. Enzyme production in USC was slightly lower than in MSLC and APC. Cell growth was similar irrespective of the cultivation method used. When NaNO3, a typical inorganic nitrogen source was used, enzyme production in all the cultures was lower than that using yeast extract. However, even using NaNO3, the amount of the enzyme produced by MSLC was 8 to 20 times higher than those by SFC, APC, USC, and LSC. Although cell growth using NaNO3 was similar to that for yeast extract in MSLC, it was markedly decreased in SFC, APC, and LSC. The reason for the difference in enzyme productivity for various cultivation methods using yeast extract and NaNO3 as a nitrogen source is discussed, on the basis of the experimental findings. The role of the oxygen transfer effect and gene expression levels in enzyme production were also examined.

Study on diagnostic plant analyzer method for support of emergency operation

International Nuclear Information System (INIS)

Yoshikawa, H.; Gofuku, A.; Itoh, K.; Wakabayashi, J.

1986-01-01

Methods of time-critical diagnostic plant analyzer are investigated which would serve as support to emergency operation of nuclear power plant. A faster-than-real-time simulator code TOKRAC is developed for analyzing PWR primary loop thermo-hydraulics of small-break LOCA and it is applied for a numerical experiment of initial phase of TMI-2 accident. TOKRAC resulted in a good agreement with a RELAP4/MOD6 calculation and the plant record with as fast as can one-tenth of real time. A real-time estimator of SG heat transfer rate based on Kalman filter is proposed and its applicability is verified using LOFT ATWS experimental data. With regards to how to integrate those methods into the software system in operation support center, a new concept of module-based simulation system is proposed which aims at offering a flexible and human-cognitive oriented environment for various analytical tool development

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

Energy Technology Data Exchange (ETDEWEB)

none,

2011-09-01

This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Supporting Development of Satellite's Guidance Navigation and Control Software: A Product Line Approach

Science.gov (United States)

McComas, David; Stark, Michael; Leake, Stephen; White, Michael; Morisio, Maurizio; Travassos, Guilherme H.; Powers, Edward I. (Technical Monitor)

2000-01-01

approaches are functionally oriented, the idea of applying the object-oriented approach in domain analysis is not new. Some authors propose to use UML as the notation underlying domain analysis. Our work is based on the same idea of merging UML and domain analysis. Further, we propose a few extensions to UML in order to express variability, and we define precisely their semantics so that a tool can support them. The extensions are designed to be implemented on the API of a popular industrial CASE tool, with obvious advantages in cost and availability of tool support. The paper outlines the product line processes and identifies where variability must be addressed. Then it describes the product line products with respect to how they accommodate variability. The Celestial Body subdomain is used as a working example. Our results to date are summarized and plans for the future are described.

THE INFORMATION SYSTEM TO SUPPORT SAFE FOOD PRODUCTION IN CATTLE SECTOR

Directory of Open Access Journals (Sweden)

Janez JERETINA

2011-01-01

Full Text Available In the year 2006 we started with the development of computerized system for monitoring the veterinarian treatments to support safe food production in cattle sector. Veterinary database and web application which will be used by PC or handhelds were created. Additionally the code listing of diseases was built up with technical support of Veterinary Faculty. The idea was that all treatments should be registered into database, connected to the database of Animal Identification and Registration Service (SIR. Slaughterhouses which are connected to SIR regularly check the identity of incoming animals. According to our project they are warned if the withdrawal period is not respected or health status is not suitable. The response time of slaughterhouses, dairy or other official authorities will be reduced in these cases. The suggested model upgrades the system of traceability and helps the veterinarians at their professional work, too. All the data will be accessible to breeders and other agricultural services.

The virtual maintenance system: a computer-based support tool for robust design, product monitoring, fault diagnosis and maintenance planning

NARCIS (Netherlands)

van Houten, Frederikus J.A.M.; Kimura, F.

2000-01-01

Digital (geometric) product models can be used for maintainability analysis and maintenance planning. It is not feasible to build digital product models for maintenance purposes only, but if a digital product model is available, it may be used to support many maintenance-related engineering tasks.

Efficiency analysis of hydrogen production methods from biomass

NARCIS (Netherlands)

Ptasinski, K.J.

2008-01-01

Abstract: Hydrogen is considered as a universal energy carrier for the future, and biomass has the potential to become a sustainable source of hydrogen. This article presents an efficiency analysis of hydrogen production processes from a variety of biomass feedstocks by a thermochemical method –

Novel Method of Lactic Acid Production by Electrodialysis Fermentation

OpenAIRE

Hongo, Motoyoshi; Nomura, Yoshiyuki; Iwahara, Masayoshi

1986-01-01

In lactic acid fermentation by Lactobacillus delbrueckii, the produced lactic acid affected the lactic acid productivity. Therefore, for the purpose of alleviating this inhibitory effect, an electrodialysis fermentation method which can continuously remove produced lactic acid from the fermentation broth was applied to this fermentation process. As a result, the continuation of fermentation activity was obtained, and the productivity was three times higher than in non-pH-controlled fermentati...

Evidence supporting product standards for carcinogens in smokeless tobacco products.

Science.gov (United States)

Hatsukami, Dorothy K; Stepanov, Irina; Severson, Herb; Jensen, Joni A; Lindgren, Bruce R; Horn, Kimberly; Khariwala, Samir S; Martin, Julia; Carmella, Steven G; Murphy, Sharon E; Hecht, Stephen S

2015-01-01

Smokeless tobacco products sold in the United States vary significantly in yields of nicotine and tobacco-specific nitrosamines (TSNA). With the passage of the Family Smoking Prevention and Tobacco Control Act, the Food and Drug Administration now has the authority to establish product standards. However, limited data exist determining the relative roles of pattern of smokeless tobacco use versus constituent levels in the smokeless tobacco product in exposure of users to carcinogens. In this study, smokeless tobacco users of brands varying in nicotine and TSNA content were recruited from three different regions in the U.S. Participants underwent two assessment sessions. During these sessions, demographic and smokeless tobacco use history information along with urine samples to assess biomarkers of exposure and effect were collected. During the time between data collection, smokeless tobacco users recorded the amount and duration of smokeless tobacco use on a daily basis using their diary cards. Results showed that independent of pattern of smokeless tobacco use and nicotine yields, levels of TSNA in smokeless tobacco products played a significant role in carcinogen exposure levels. Product standards for reducing levels of TSNA in smokeless tobacco products are necessary to decrease exposure to these toxicants and potentially to reduce risk for cancer. ©2014 American Association for Cancer Research.

Continued SOFC cell and stack technology and improved production methods

Energy Technology Data Exchange (ETDEWEB)

Wandel, M.; Brodersen, K.; Phair, J. (and others)

2009-05-15

Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

Why do local communities support or oppose seawater desalination?

Science.gov (United States)

Mirza Ordshahi, B.; Heck, N.; Faraola, S.; Paytan, A.; Haddad, B.; Potts, D. C.

2016-12-01

Freshwater shortages have become a global problem due to increasing water consumption and environmental changes which are reducing the reliability of traditional water resources. One option to address water shortages in coastal areas is the use of seawater desalination. Desalination technology is particularly valued for the production of high quality drinking water and consistent production. However, seawater desalination is controversial due to potential environmental, economic, and societal impacts and lack of public support for this water supply method. Compared to alternative potable water production methods, such as water recycling, little is known about public attitudes towards seawater desalination and factors that shape local support or rejection. Our research addresses this gap and explores variables that influence support for proposed desalination plants in the Monterey Bay region, where multiple facilities have been proposed in recent years. Data was collected via a questionnaire-based survey among a random sample of coastal residents and marine stakeholders between June-July, 2016. Findings of the study identify the influence of socio-demographic variables, knowledge about desalination, engagement in marine activities, perception of the environmental context, and the existence of a National Marine Sanctuary on local support. Research outcome provide novel insights into public attitudes towards desalination and enhances our understanding of why communities might support or reject this water supply technology.

Statistical methods for the evaluation of educational services and quality of products

CERN Document Server

Bini, Matilde; Piccolo, Domenico; Salmaso, Luigi

2009-01-01

The book presents statistical methods and models that can usefully support the evaluation of educational services and quality of products. The evaluation of educational services, as well as the analysis of judgments and preferences, poses severe methodological challenges because of the presence of the following aspects: the observational nature of the context, which is associated with the problems of selection bias and presence of nuisance factors; the hierarchical structure of the data (multilevel analysis); the multivariate and qualitative nature of the dependent variable; the presence of non observable factors, e.g. the satisfaction, calling for the use of latent variables models; the simultaneous presence of components of pleasure and components of uncertainty in the explication of the judgments, that asks for the specification and estimation of mixture models. The contributions concern methodological advances developed mostly with reference to specific problems of evaluation using real data sets.

Reactor and method for production of nanostructures

Science.gov (United States)

Sunkara, Mahendra Kumar; Kim, Jeong H.; Kumar, Vivekanand

2017-04-25

A reactor and method for production of nanostructures, including metal oxide nanowires or nanoparticles, are provided. The reactor includes a regulated metal powder delivery system in communication with a dielectric tube; a plasma-forming gas inlet, whereby a plasma-forming gas is delivered substantially longitudinally into the dielectric tube; a sheath gas inlet, whereby a sheath gas is delivered into the dielectric tube; and a microwave energy generator coupled to the dielectric tube, whereby microwave energy is delivered into a plasma-forming gas. The method for producing nanostructures includes providing a reactor to form nanostructures and collecting the formed nanostructures, optionally from a filter located downstream of the dielectric tube.

A Proposal of a Method to Measure and Evaluate the Effect to Apply External Support Measures for Owners by Construction Management Method, etc

Science.gov (United States)

Tada, Hiroshi; Miyatake, Ichiro; Mouri, Junji; Ajiki, Norihiko; Fueta, Toshiharu

In Japan, various approaches have been taken to ensure the quality of public works or to support the procurement regime of the governmental agencies, as a means to utilize external resources, which include the procurement support service or the construction management (CM) method. Although discussions on these measures to utilize external resources (hereinafter referred to as external support measure) have been going on, as well as the follow-up surveys showing the positive effects of such measures have been conducted, the surveys only deal with the matters concerning the overall effects of the external support measure on the whole, meaning that the effect of each item of the tasks have not been addressed, and that the extent it dealt with the expectations of the client is unknown. However, the effective use of the external support measure in future cannot be achieved without knowing what was the purpose to introduce the external support measure, and what effect was expected on each task item, and what extent the expectation fulfilled. Furthermore, it is important to clarify not only the effect as compared to the client's expectation (performance), but also the public benefit of this measure (value improvement). From this point of view, there is not an established method to figure out the effect of the client's measure to utilize external resources. In view of this background, this study takes the CM method as an example of the external support measure, and proposes a method to measure and evaluate the effect by each task item, and suggests the future issues and possible responses, in the aim of contributing the promotion, improvement, and proper implementation of the external support measures in future.

Selected business intelligence methods for decision-making support in a finance institution

OpenAIRE

Mezera, Filip; Křupka, Jiří

2017-01-01

This article deals with decision-making support methods’ implementation in a medium size financial company with international operations. The objective of this article is to show the abilities of these methods to precise decision-making of management. At the beginning of this article there is briefly described the existing situation in this business sector in Central Europe. After that part Business Intelligence methods are described as well as the reasons while these methods have been introd...

Method for Bacterial Growth and Ammonia Production and Effect of Inhibitory Substances in Disposable Absorbent Hygiene Products.

Science.gov (United States)

Forsgren-Brusk, Ulla; Yhlen, Birgitta; Blomqvist, Marie; Larsson, Peter

The purpose of this study was to evaluate a pragmatic laboratory method to provide a technique for developing incontinence products better able to reduce malodor when used in the clinical setting. Bacterial growth and bacterially formed ammonia in disposable absorbent incontinence products was measured by adding synthetic urine inoculated with bacteria to test samples cut from the crotch area of the product. The inhibitory effect's of low pH (4.5 and 4.9) and 3 antimicrobial substances-chlorhexidine, polyhexamethylene biguanide (PHMB), and thymol-at 2 concentrations each, were studied. From the initial inocula of 3.3 log colony-forming units per milliliter (cfu/mL) at baseline, the bacterial growth of the references increased to 5.0 to 6.0 log cfu/mL at 6 hours for Escherichia coli, Proteus mirabilis, and Enterococcus faecalis. At 12 hours there was a further increase to 7.0 to 8.9 log cfu/mL. Adjusting the pH of the superabsorbent in the incontinence product from 6.0 to pH 4.5 and pH 4.9 significantly (P disposable absorbent products to inhibit bacterial growth and ammonia production. This technique, we describe, provides a pragmatic method for assessing the odor-inhibiting capacity of specific incontinence products.

Comparison of new immunofluorescence method for detection of soy protein in meat products with immunohistochemical, histochemical, and ELISA methods

Directory of Open Access Journals (Sweden)

Michaela Petrášová

2014-01-01

Full Text Available Soy proteins are commonly used in the food industry thanks to their technological properties. However, soy is, along with cow’s milk, eggs, wheat, peanuts, tree nuts, fish, crustaceans, and molluscs, responsible for around 90% of food allergies, and is also one of the foodstuffs that can cause anaphylaxis. The aim of this work was to compare the immunofluorescence method for the detection of soy protein in meat products purchased from the retail market with other microscopic methods (immunohistochemical and histochemical, with the ELISA reference method and with the confirmatory results. Within the research, 127 meat products purchased in the retail network were examined using the immunofluorescence method used for the detection of soy protein. The method was compared to Enzyme-Linked ImmunoSorbent Assay (ELISA, immunohistochemical, and histochemical methods. According to McNemar’s test, non-compliance between the immunofluorescence method and immunohistochemical method was low. In addition, a significant difference between the fluorescence method and ELISA (P P < 0.01 was found. The immunofluorescence method was also compared with confirmatory results. According to McNemar’s test, non-compliance between the immunofluorescence method and confirmatory results was low. The results showed the possibilities of this new method to detect the content of soy protein in meat products.

NUTRITIVE SUPPORT OF YOUNG SPORTSMEN USING A SPECIALIZED RUSSIAN PRODUCT

Directory of Open Access Journals (Sweden)

T. E. Borovik

2013-01-01

Full Text Available Organization of adequate nutrition of children and adolescents actively going in for sports is of the highest importance both for improving sports results and preserving children’s health. On the modern stage of sports neutraceuticals development, it is relevant to substantiate approaches to nutrition on all stages of the training process, develop methodological basis for individual nutrition selection and conduct demonstrative trials in order to evaluate efficacy of nutritional measures. The pediatric nutrition department of the FSBI “Scientific Center of Children’s Health” conducted a controlled trial of efficacy of a new Russian product for nutritive support of children in the training period in 2012 in order to study possibilities of nutrition optimization for young sportsmen. We noticed statistically significant alterations of bioimpedance analysis values – lean and active cell body mass – in the setting of nutrition correction – intake of 200-400 ml/day of the product for 21 days; at the same time, the fat mass remained the same. Psychological testing using WAN questionnaire (well-being, activity, mood conducted in the recovery period of the training process also revealed positive dynamics. The product may be used in the dose of 200-400 ml at any time of day; at the same time, it is most reasonable to take it as an additional food intake in the event of considerable training stress immediately before or after training, when adequate nutrition organization is hindered.

Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

Directory of Open Access Journals (Sweden)

Pengyu Gao

2016-03-01

Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

Genes related to xylose fermentation and methods of using same for enhanced biofuel production

Science.gov (United States)

Wohlbach, Dana J.; Gasch, Audrey P.

2014-08-05

The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

Form gene clustering method about pan-ethnic-group products based on emotional semantic

Science.gov (United States)

Chen, Dengkai; Ding, Jingjing; Gao, Minzhuo; Ma, Danping; Liu, Donghui

2016-09-01

The use of pan-ethnic-group products form knowledge primarily depends on a designer's subjective experience without user participation. The majority of studies primarily focus on the detection of the perceptual demands of consumers from the target product category. A pan-ethnic-group products form gene clustering method based on emotional semantic is constructed. Consumers' perceptual images of the pan-ethnic-group products are obtained by means of product form gene extraction and coding and computer aided product form clustering technology. A case of form gene clustering about the typical pan-ethnic-group products is investigated which indicates that the method is feasible. This paper opens up a new direction for the future development of product form design which improves the agility of product design process in the era of Industry 4.0.

Sugar supported H/sub 2/ production and C/sub 2/H/sub 2/ reduction by the cyanobiont Anabaena azollae

Energy Technology Data Exchange (ETDEWEB)

Rozen, A.; Tel-Or, E.

1986-01-01

Sugar supported activities of H/sub 2/ production and C/sub 2/H/sub 2/ reduction were characterized in axenic cell cultures of the cyanobiont Anabaena azollae isolated from the water fern Azolla filiculoides. Fructose was found to be the favoured substrate, enhancing activities in both the light and the dark even at relatively low concentrations of 0.5-1.0 mM. Higher concentrations of sucrose, (10-20mM) also supported H/sub 2/ production and C/sub 2/H/sub 2/ reduction, while glucose was less effective. Levels of H/sub 2/ production were always lower than those of C/sub 2/H/sub 2/ reduction. 13 references.

The use of ICT tools to support collaborative product development activities: evidences from Brazilian industry

Directory of Open Access Journals (Sweden)

Daisy Valle Enrique

2018-06-01

Full Text Available Abstract Paper aims This paper aims to understand the relationship between Information & Communication Technology (ICT, collaborative New Product Development (NPD and customer satisfaction (NPD performance. Originality We target the relationship between ICT, collaborative NPD and NPD performance. ICT is assessed as a set of specific tools adopted by the companies. Research method We test the mediating role of collaborative practices in the effect of ICT tools on customer satisfaction (as NPD performance by means of a survey of 105 Brazilian firms. Main findings Collaboration with customers and suppliers has an important role for customer satisfaction and the use of ICT has significant effect on NPD performance through the mediating role of collaborative practices. Implications for theory and practice Implementing only ICT tools is not enough to achieve higher level of success in NPD. Managers should first strength the relationship between stakeholders and then adopt ICT tools to support the cooperation.

A fast method for calculating reliable event supports in tree reconciliations via Pareto optimality.

Science.gov (United States)

To, Thu-Hien; Jacox, Edwin; Ranwez, Vincent; Scornavacca, Celine

2015-11-14

Given a gene and a species tree, reconciliation methods attempt to retrieve the macro-evolutionary events that best explain the discrepancies between the two tree topologies. The DTL parsimonious approach searches for a most parsimonious reconciliation between a gene tree and a (dated) species tree, considering four possible macro-evolutionary events (speciation, duplication, transfer, and loss) with specific costs. Unfortunately, many events are erroneously predicted due to errors in the input trees, inappropriate input cost values or because of the existence of several equally parsimonious scenarios. It is thus crucial to provide a measure of the reliability for predicted events. It has been recently proposed that the reliability of an event can be estimated via its frequency in the set of most parsimonious reconciliations obtained using a variety of reasonable input cost vectors. To compute such a support, a straightforward but time-consuming approach is to generate the costs slightly departing from the original ones, independently compute the set of all most parsimonious reconciliations for each vector, and combine these sets a posteriori. Another proposed approach uses Pareto-optimality to partition cost values into regions which induce reconciliations with the same number of DTL events. The support of an event is then defined as its frequency in the set of regions. However, often, the number of regions is not large enough to provide reliable supports. We present here a method to compute efficiently event supports via a polynomial-sized graph, which can represent all reconciliations for several different costs. Moreover, two methods are proposed to take into account alternative input costs: either explicitly providing an input cost range or allowing a tolerance for the over cost of a reconciliation. Our methods are faster than the region based method, substantially faster than the sampling-costs approach, and have a higher event-prediction accuracy on

Hollow fibre supported liquid membrane extraction of diphenylhydramine, chlorpheniramine and ketoprofen in pharmaceutical products

Directory of Open Access Journals (Sweden)

Titus A.M. Msagati

2010-08-01

Full Text Available A simple sample pre-treatment method utilizing hollow fibre supported liquid membrane (HFSLM was carried out on pharmaceuticals samples comprising of cough syrups (CS1 and CS2 and an anti-inflammatory product (AI. The active ingredients targeted in the extraction process were diphenylhydramine (DPH, chlorpheniramine (CPA [(S-γ-(4-chlorophenyl-N,N-dimethyl-2-pyridinepropanamine maleate salt] and ketoprofen (KP [(RS2-(3-benzoylphenyl-propionic acid] which were detected by a high performance liquid chromatograph (HPLC-UV/DAD after HFSLM process. Factors controlling the efficiency of HFSLM extraction such as sample pH, stripping phase pH, enrichment time, stirring speed as well as the organic solvent used for the entrapment of these analytes were optimized to achieve the best selectivity and high enrichment factors. KP extracted from AI product had optimal pH of 10 for the stripping solution and 4 for sample with enrichment factors of 339. DPH had optimal pH of 12 (sample and 3 for the stripping solution and had enrichment factors of 519. The optimal sample pH for CPA was 0.5 while the stripping phase pH was 13. The HFSLM technique showed 81% recovery of DPH from CS1, while for CPA from CS2 was 78 % and that of KP from AI was 80 %. The LODs obtained were 0.06 mu;g/L for all the compounds.

Simulation As a Method To Support Complex Organizational Transformations in Healthcare

NARCIS (Netherlands)

Rothengatter, D.C.F.; Katsma, Christiaan; van Hillegersberg, Jos

2010-01-01

In this paper we study the application of simulation as a method to support information system and process design in complex organizational transitions. We apply a combined use of a collaborative workshop approach with the use of a detailed and accurate graphical simulation model in a hospital that

Development and application of a decision support tool for reduction of product losses in the food-processing industry

NARCIS (Netherlands)

Akkerman, Renzo; van Donk, Dirk Pieter

2008-01-01

In food-processing industries, reduction of product losses is important for improving profitability and sustainability. This paper presents a decision support tool for analyzing the effects of planning decisions on the amount of product losses in the food-processing industry. We created a research

ORGANIZATIONAL AND METHODIC SUPPORT TO COMMERCIAL BANK STRATEGIC PLANNING

Directory of Open Access Journals (Sweden)

N. G. Korostyliov

2011-01-01

Full Text Available Organizational and methodic support to bank activity strategic planning comprises making prospects for main bank finance activity indices, their correction and examination as well as control over their dynamics. There are specific features of organization of bank strategic planning at present stage of development of Russian economics. Main stages of this process and principles on which this study should be based are discussed. Banking environment information level should be taken into account, feasibility testing of organizational planning systems having to be undertaken in practice.

MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

OpenAIRE

Tunjo Perić; Željko Mandić

2017-01-01

This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method) in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained resul...

Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

Science.gov (United States)

Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

2017-09-01

This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

Forecasting Rubber Production Using Intelligent Time Series Analysis to Support Decision Makers

OpenAIRE

Subsorn, Panida; Xiao, Jitian; Clayden, Judy

2010-01-01

This chapter has investigated the best-fitting forecasting model for national rubber production forecasting for 2007 and 2008. The methods used in this study were based on non-neural network training and neural network training techniques to compare with the actual rubber production data for the best-fitting forecasting model. Hence, neural network training was presented to obtain more accurate forecasts for 2007 and 2008. To our knowledge, this is the preliminary study that brings a new pers...

Algorithm for decision support as the tool for control system of industries with variable assortment of products

Science.gov (United States)

Ladaniuk, Anatolii; Ivashchuk, Viacheslav; Kisała, Piotr; Askarova, Nursanat; Sagymbekova, Azhar

2015-12-01

Conditions of diversification of enterprise products are involving for changes of higher levels of management hierarchy, so it's leading by tasks correcting and changing schedule for operating of production plans. Ordinary solve by combination of enterprise resource are planning and management execution system often has exclusively statistical content. So, the development of decision support system, that helps to use knowledge about subject for capabilities estimating and order of operation of production object is relevant in this time.

Improvement of organization and audit methods of production reserves at the enterprise

Directory of Open Access Journals (Sweden)

M.I. Skrypnyk

2016-12-01

Full Text Available The current research deals with the scientific substantiation of theoretical positions and development of practical recommendations for improving the organization and audit methodology of production reserves at an enterprise. The authors apply the methods of specification. Testing, analysis, synthesis, generalization are the basis for the improvement of the organization and audit methodology of production reserves at an enterprise. The researchers formulate the goals, objectives, information sources and basic methods used in the audit of production reserves. The article examines the main stages of the audit of production reserves and the methodology of its implementation. The algorithm of auditing of production reserves is defined. The paper examines the basic working papers of the auditor for auditing of production reserves such as the test on internal control of production reserves, the audit plan of production reserves, the audit program of production reserves, the comparative statement of inventory resultsof capital assets. These documents, in their turn, will increase the level of control and improve the quality of audit operations with production reserves. The article determines the common errors that occur during operations with production reserves tand you can avoid the errors using the developed plan, program and audit working papers used to conduct the audit of production reserves.

On the use of supported ceria membranes for oxyfuel process/syngas production

DEFF Research Database (Denmark)

Lobera, M.P.; Serra, J.M.; Foghmoes, Søren Preben Vagn

2011-01-01

Ceramic oxygen transport membranes (OTMs) enable selective oxygen separation from air at high temperatures. Among several potential applications for OTMs, the use in (1) oxygen production for oxyfuel power plants and (2) the integration in high-temperature catalytic membrane reactors for alkane...... upgrading through selective oxidative reactions are of special interest. Nevertheless, these applications involve the direct contact of the membrane surface with carbon-rich atmospheres. Most state-of-the-art permeable membranes are based on perovskites, which are prone to carbonation under operation in CO2......-rich environments and/or decomposition in reducing gas environments. The oxygen flux through supported thin film membranes of Ce0.9Gd0.1O1.95−δ (CGO) with 2 mol.% of cobalt was measured for oxygen separation in oxyfuel processes and in syngas production and degradation was compared to perovskite...

New method of noncontact temperature measurement in on-line textile production

Science.gov (United States)

Cheng, Xianping; Song, Xing-Li; Deng, Xing-Zhong

1993-09-01

Based on the condition of textile production the method of infrared non-contact temperature measurement is adcpted in the heat-setting and drying heat-treatment process . This method is used to monitor the moving cloth. The temperature of the cloth is displayed rapidly and exactly. The principle of the temperature measurement is analysed theoretically in this paper. Mathematical analysis and calculation are used for introducing signal transmitting method. Adopted method of combining software with hardware the temperature is corrected and compensated with the aid of a single-chip microcomputer. The results of test indicate that the application of temperature measurement instrument provides reliable parameters in the quality control. And it is an important measure on improving the quality of products.

Using a decision support system to optimize production of agricultural crop residue Biofeedstock

International Nuclear Information System (INIS)

Hoskinson, Reed L.; Rope, Ronald C.; Fink, Raymond K.

2007-01-01

For several years the Idaho National Laboratory (INL) has been developing a Decision Support System for Agriculture (DSS4Ag) which determines the economically optimum recipe of various fertilizers to apply at each site in a field to produce a crop, based on the existing soil fertility at each site, as well as historic production information and current prices of fertilizers and the forecast market price of the crop at harvest. In support of the growing interest in agricultural crop residues as a bioenergy feedstock, we have extended the capability of the DSS4Ag to develop a variable-rate fertilizer recipe for the simultaneous economically optimum production of both grain and straw. In this paper we report the results of 2 yr of field research testing and enhancing the DSS4Ag's ability to economically optimize the fertilization for the simultaneous production of both grain and its straw, where the straw is an agricultural crop residue that can be used as a biofeedstock. For both years, the DSS4Ag reduced the cost and amount of fertilizers used and increased grower profit, while reducing the biomass produced. The DSS4Ag results show that when a biorefinery infrastructure is in place and growers have a strong market for their straw it is not economically advantageous to increase fertilization in order to try to produce more straw. This suggests that other solutions, such as single-pass selective harvest, must be implemented to meet national goals for the amount of biomass that will be available for collection and use for bioenergy. (author)

Effect of Memory Support and Elicited Production on Fast Mapping of New Words by Adolescents with Down Syndrome

Science.gov (United States)

Chapman, Robin S.; Sindberg, Heidi; Bridge, Cynthia; Gigstead, Katherine; Hesketh, Linda

2006-01-01

Purpose: The purpose of this study was to determine whether memory support and elicited production differentially benefited fast mapping of new vocabulary (comprehension, production accuracy, and speed) in adolescents with Down syndrome (DS) compared with typically developing (TD) children matched for syntax comprehension. The study also examined…

The Methodical Instrumentarium for Analytical Monitoring of Markets for High-Tech Products

Directory of Open Access Journals (Sweden)

Mikaelian Suren G.

2017-10-01

Full Text Available The article is aimed at clarifying the essential characteristics of high-tech products and specifying the features of analytical monitoring of markets for high-tech products. The conceptual approaches to interpretation of the essence of high-tech products as a basic concept in the categorical apparatus for researching the systemic and complex processes of technological development have been clarified. The most efficient instruments for assessing innovation processes in the high-tech sphere have been systematized. The methodical instrumentarium for analytical monitoring of the markets for high-tech products has been clarified. The terminology of a high-tech product has been clarified in order to formulate the methodical instrumentarium for analytical monitoring of market for high-tech products. It has been determined that «high-tech products» are the original basic concept in the categorical apparatus for researching the systemic and complex processes of the high-tech market that needs to be concretized. Conceptual approaches to the essence of high-tech products have been systematized.

Aquatic food production modules in bioregenerative life support systems based on higher plants

Science.gov (United States)

Bluem, V.; Paris, F.

Most bioregenerative life support systems (BLSS) are based on gravitropic higher plants which exhibit growth and seed generation disturbances in microgravity. Even when used for a lunar or martian base the reduced gravity may induce a decreased productivity in comparison to Earth. Therefore, the implementation of aquatic biomass production modules in higher plant and/or hybrid BLSS may compensate for this and offer, in addition, the possibility to produce animal protein for human nutrition. It was shown on the SLS-89 and SLS-90 space shuttle missions with the C.E.B.A.S.-MINI MODULE that the edible non gravitropic rootless higher aquatic plant Ceratophyllum demeresum exhibits an undisturbed high biomass production rate in space and that the teleost fish species, Xiphophorus helleri, adapts rapidly to space conditions without loss of its normal reproductive functions. Based on these findings a series of ground-based aquatic food production systems were developed which are disposed for utilization in space. These are plant production bioreactors for the species mentioned above and another suitable candidate, the lemnacean (duckweed) species, Wolffia arrhiza. Moreover, combined intensive aquaculture systems with a closed food loop between herbivorous fishes and aquatic and land plants are being developed which may be suitable for integration into a BLSS of higher complexity.

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

Energy Technology Data Exchange (ETDEWEB)

Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2012-04-01

The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

A novel superconducting magnetic levitation method to support the laser fusion capsule by using permanent magnets

Directory of Open Access Journals (Sweden)

Xiaojia Li

2018-05-01

Full Text Available A novel magnetic levitation support method is proposed, which can relieve the perturbation caused by traditional support methods and provide more accurate position control of the capsule. This method can keep the perfect symmetry of the octahedral spherical hohlraum and has the characteristics in stability, tunability and simplicity. It is also favorable that all the results, such as supporting forces acting on the superconducting capsule, are calculated analytically, and numerical simulations are performed to verify these results. A typical realistic design is proposed and discussed in detail. The superconducting coating material is suggested, and the required superconducting properties are listed. Damped oscillation of the floating capsule in thin helium gas is discussed, and the restoring time is estimated. Keywords: ICF capsule support, Magnetic levitation, Symmetry, PACS Codes: 52.57.Fg, 74.70.Ad, 74.78.-W

From Big Data to Small Transportable Products for Decision Support for Floods in Namibia

Science.gov (United States)

Mandl, D.; Frye, S.; Cappelaere, P.; Policelli, F.; Handy, M.; Sohlberg, R. A.; Grossman, R.

2013-12-01

During the past four years, a team from NASA, Oklahoma University, University of Maryland and University of Chicago in collaboration with the Namibia Hydrological Services (NHS) has explored ways to provide decision support products for floods. The products include a variety of data including a hydrological model, ground measurements such as river gauges, and earth remote sensing data. This poster or presentation highlights the lessons learned in acquiring, storing, managing big data on the cloud and turning it into relevant products for GEOSS users. Technology that has been explored includes the use of Hadoop/MapReduce and Accumulo to process and manage the large data sets. OpenStreetMap was explored for use in cataloging water boundaries and enabling collaborative mapping of the base water mask and floods. A Flood Dashboard was created to customize displays of various data products. Finally, a higher level Geo-Social Application Processing Interface (API) was developed so that users can discover, generate products dynamically for their specific needs/societal benefit areas and then share them with their Community of Practice over social networks. Results of this experiment have included 100x reduction in size of some flood products, making it possible to distribute these products to mobile platforms and/or bandwidth-limited users.

Overview on Untargeted Methods to Combat Food Frauds: A Focus on Fishery Products

Directory of Open Access Journals (Sweden)

Giuseppina M. Fiorino

2018-01-01

Full Text Available Authenticity and traceability of food products are of primary importance at all levels of the production process, from raw materials to finished products. Authentication is also a key aspect for accurate labeling of food, which is required to help consumers in selecting appropriate types of food products. With the aim of guaranteeing the authenticity of foods, various methodological approaches have been devised over the past years, mainly based on either targeted or untargeted analyses. In this review, a brief overview of current analytical methods tailored to authenticity studies, with special regard to fishery products, is provided. Focus is placed on untargeted methods that are attracting the interest of the analytical community thanks to their rapidity and high throughput; such methods enable a fast collection of “fingerprinting signals” referred to each authentic food, subsequently stored into large database for the construction of specific information repositories. In the present case, methods capable of detecting fish adulteration/substitution and involving sensory, physicochemical, DNA-based, chromatographic, and spectroscopic measurements, combined with chemometric tools, are illustrated and commented on.

Maximizing Product Innovation through Adaptive Application of User-Centered Methods for Defining Customer Value

Directory of Open Access Journals (Sweden)

Tonje Overvik Olsen

2011-12-01

Full Text Available Establishing deep understanding of customers is a prerequisite to improve success rates of innovations under today’s transient business conditions. This paper summarizes methods and tools to increase customer understanding in new product development. A case study of developing an office chair was conducted, utilizing four such methods (web based survey, interview, observation and workshops to provide directions for later application. Results indicate that methods revealing emotionally-related customer information (workshops and observation are resource-intensive and provide less amount of information directly applicable to the product development team. The opposite is the case for methods providing more functionally-related information (web based survey and interview. The overall conclusion is that the latter methods are more suitable for product improvements, while the former may provide valuable information for creating more differentiated products.

Considerations Concerning the Application of Target Costing Method in the Industry of Dairy Products

Directory of Open Access Journals (Sweden)

Mortură Laura Alexandra

2017-01-01

Full Text Available In the present conditions of the market economy, which is in full process of globalization, theadaptation of the more complex and diverse needs of the final consumers, leads to a permanentcreation and development of new products and services by the entities in order to satisfy theseneeds. Thus, the entities must apply efficient and tested methods for determining and provisioningthe costs which will result from launching new products on the market, methods which wouldsupport and ensure the best quality – price report, and which are to reduce the production costs upto a level of not affecting the quality of the final product. Such a method, according to specialtyliterature is the modern method of Target Costing.

Improving the relevance and impact of decision support research: A co-production framework and water management case study

Science.gov (United States)

Smith, R.; Kasprzyk, J. R.; Dilling, L.; Basdekas, L.; Kaatz, L.

2016-12-01

In light of the unpredictable effects of climate change and population shifts, responsible resource management will require new types of information and strategies going forward. For water utilities, this means that water supply infrastructure systems must be expanded and/or managed for changes in overall supply and increased extremes. Utilities have begun seeking innovative tools and methods to support planning and decision making, but there are limited channels through which they can gain exposure to emerging tools from the research world, and for researchers to uptake important real-world planning and decision context. A transdisciplinary team of engineers, social and climate scientists, and water managers designed this study to develop and apply a co-production framework which explores the potential of an emerging decision support tool to enhance flexibility and adaptability in water utility planning. It also demonstrates how to improve the link between research and practice in the water sector. In this study we apply the co-production framework to the use of Multiobjective Evolutionary Algorithms (MOEAs). MOEAs have shown promise in being able to generate and evaluate new planning alternatives but they have had little testing or application in water utilities. Anchored by two workshops, this study (1) elicited input from water managers from six water suppliers on the Front Range of Colorado, USA, to create a testbed MOEA application, and (2) evaluated the managers' responses to multiobjective optimization results. The testbed consists of a Front Range-relevant hypothetical water supply model, the Borg MOEA, hydrology and demand scenarios, and a set of planning decisions and performance objectives that drive the link between the algorithm and the model. In this presentation we describe researcher-manager interactions at the initial workshop that served to establish relationships and provide in-depth information to researchers about regional water management